WorldWideScience

Sample records for stand-alone desktop fashion

  1. Stand-alone XLIF

    DEFF Research Database (Denmark)

    Hansen, E. J.; Simony, A.; Hummel, Stefan

    2015-01-01

    and clinical/radiological results in 22 patients treated with XLIF procedure for DS or degenerative disc disease (DDD). Material and methods: 22 consecutive patients with DS underwent surgery with the XLIF stand-alone procedure, with follow-up of 24 months. Clinical outcome scores were collected. Complications......Introduction: Adult thoracolumbar degeneration is an increasing challenge in the aging population. With age the progressive degeneration of the discs leads to an asymmetric collapse and a thoracolumbar coronal plane deformity, a degenerative scoliosis (DS). Aim: To evaluate the complication rate......-year follow-up, with a 31.8% revision rate. Due to the high revision rate we recommend supplementary posterior instrumentation, to achieve a higher fusion rate. When considering XLIF-stand-alone procedure for DS or DDD without supplemental posterior instrumentation, only single-level disease should...

  2. The Stand-alone Heliostat

    International Nuclear Information System (INIS)

    Garcia Navajas, G. I.; Egea Gea, A.

    2000-01-01

    The first Autonomous Heliostat has been developed by CIEMAT at PSA facilities in Almeria. This heliostat is an innovative approach to reducing the civil engineering work costs in heliostat fields of central tower plants. Channels, cables and other electric elements have been eliminated in the new heliostat. Thus, one 70-nr, classical T glass/metal heliostat has been adapted to include all the new stand-alone concept components. A PV system is able to drive two sun-tracking DC motors between 5 and 24Vdc, 0 and 15A. The heliostat communicates with the control room 400-m away by using a radio-modem working at 9600 baud. An anemometer, a wind switcher, light and ambient temperature sensors have been installed on the heliostat for self-protection decision-making. A PV panel integrated into the heliostat reflecting surface, eliminates cabling and other elements required for a conventional power supply. Communication lines between master control and local control have been replaced by radio-modem. Testing has validated the technical feasibility of the prototype and quantified the real consumption and efficiencies of new elements. The extra costs produced.by the autonomous concepts are compared with the cost of civil work in conventional heliostat field. (Author) 8 refs

  3. Basic Stand Alone Medicare Outpatient Procedures PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Outpatient Procedures Public Use Files (PUF) with information from Medicare outpatient claims. The CMS BSA...

  4. Basic Stand Alone Medicare Hospice Beneficiary PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Hospice Beneficiary Public Use Files (PUF) with information from Medicare hospice claims. The CMS BSA Hospice...

  5. Basic Stand Alone Carrier Line Items PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Carrier Line Items Public Use Files (PUF) with information from Medicare Carrier claims. The CMS BSA Carrier Line...

  6. Basic Stand Alone Medicare Inpatient Claims PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Inpatient Public Use Files (PUF) named CMS 2008 BSA Inpatient Claims PUF with information from 2008 Medicare...

  7. Stand-alone photovoltaic applications. Lessons learned

    International Nuclear Information System (INIS)

    Loois, G.; Van Hemert, B.

    1999-02-01

    The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative R and D agreements established within the IEA. The objective of Task III is to promote and facilitate the exchange of information and experiences in the field of PV Systems in Stand-alone and Island Applications (SAPV). The book focuses on the practical experiences gained, and does not aim to provide a complete manual on SAPV. When Task III started its activities in 1993, a collection of 50 'State of the art' projects was published in the book 'Examples of Stand-Alone Photovoltaic Systems'. This publication marked the base line for the work of the task. Now, in 1998, the showcases from each country demonstrate the lessons learned in five years of cooperation. The book consists of two parts. The first part contains eight chapters dealing with a specific aspect of stand-alone PV. The second part introduces 14 national showcase projects in a systematic presentation. Each chapter and showcase can be read independently from the rest of the book. Chapter 2, contributed by The Netherlands, analyses the market for stand-alone PV systems. It gives an overview of the 'traditional' application of stand-alone PV, which is the electrification of remote buildings and which has been addressed in depth in other publications. The focus is on the market niches of service applications that are also interesting for more densely populated areas, e.g. in industrialised countries. The United Kingdom illustrates the economic aspects in Chapter 3. Cost comparisons are made, but more important is the illustration of the non-financial considerations that make PV the preferred choice as a power source for many applications. Switzerland explores in Chapter 4 (financing aspects) different financing mechanisms, and financial policies used to overcome the initial cost barrier. Most of these approaches have been applied in developing countries rather than in the western world. Using various examples from all over the

  8. 39 CFR 122.2 - Stand-alone special services.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Stand-alone special services. 122.2 Section 122.2 Postal Service UNITED STATES POSTAL SERVICE POST OFFICE SERVICES [DOMESTIC MAIL] SERVICE STANDARDS FOR MARKET-DOMINANT SPECIAL SERVICES PRODUCTS § 122.2 Stand-alone special services. (a) The service standard...

  9. Ampere hour method of sizing a stand alone photovoltaic system ...

    African Journals Online (AJOL)

    Stand-alone photovoltaic power systems are natural options for application in electrification of remote areas which are not served by the grid electricity supply system. An ampere-hour method of sizing a stand-alone PV system for application in any remote location has been presented. The design which is for both ac and dc ...

  10. Basic Stand Alone Skilled Nursing Facility Beneficiary PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Skilled Nursing Facility (SNF) Beneficiary Public Use Files (PUF) with information from Medicare SNF claims. The...

  11. Basic Stand Alone Medicare Home Health Beneficiary PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Home Health Agency (HHA) Beneficiary Public Use Files (PUF) with information from Medicare HHA claims. The CMS BSA...

  12. Basic Stand Alone Medicare DME Line Items PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Durable Medical Equipment (DME) Line Items Public Use Files (PUF) with information from Medicare DME claims. The...

  13. Models for a stand-alone PV system

    DEFF Research Database (Denmark)

    Hansen, A.D.; Sørensen, Poul Ejnar; Hansen, L.H.

    2001-01-01

    This report presents a number of models for modelling and simulation of a stand-alone photovoltaic (PV) system with a battery bank verified against a system installed at Risø National Laboratory. The work has been supported by the Danish Ministry ofEnergy, as a part of the activities in the Solar...... Energy Centre Denmark. The study is carried out at Risø National Laboratory with the main purpose to establish a library of simple mathematical models for each individual element of a stand-alone PVsystem, namely solar cells, battery, controller, inverter and load. The models for PV module and battery...

  14. PMBLDCG based stand-alone wind energy conversion system for ...

    African Journals Online (AJOL)

    This paper deals with a permanent magnet brushless DC generator (PMBLDCG) based stand-alone wind energy conversion system (WECS) for small scale power generation. A buck-boost DC-DC converter is used for controlling the PMBLDCG speed to achieve optimum energy output from the wind turbine without sensing ...

  15. The stand-alone test and decreasing serial cost sharing

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Thorlund-Petersen, Lars

    2000-01-01

    The rule of decreasing serial cost sharing defined in de Frutos [1] over the class of concave cost functions may violate the important stand-alone test. Sufficient conditions for the test to be satisfied are given, in terms of individual rationality as well as coalitional stability...

  16. Fashionitis

    OpenAIRE

    Bray, Jeffery P.

    2009-01-01

    Shopping is the nation’s fourth favourite leisure activity , costing us £37billion per year – but it seems that for some it has become a compulsive obsession for having the latest look, the ultimate outfit and chicest wardrobe. Jeff Bray suggests: ‘Fashion-itis describes the behaviour whereby clothes shopping is highly hedonistic, forms a significant social and leisure activity, and becomes almost an obsession.’

  17. Radon Monitoring in Army Stand-Alone Housing Units

    Science.gov (United States)

    1990-04-01

    Y cm a cc 0000 0003 000 000 :: - -@-I.00 cmjinu mooc . 0J~CJ~ TTTT J !8 2 T WWWW WW.000 coo 0~~ 80 Im - v ;o e I3 ec ;: C -1,4 04. -c mco : - a c W" 1 .1...Chamber ....................... 25 V U I I I viI Final Report, April 1990 Radon Monitoring in Army Stand-alone Housing Units Summary Argonne National...and analysis. The quality control protocols appli- cable to detector analysis are contained in Chapter V of the procedures manual developed by Tech

  18. Future UK markets for stand-alone renewable energy systems

    International Nuclear Information System (INIS)

    Paish, O.

    1999-01-01

    A study to identify and quantify the market for stand-alone renewable energy supplies of power (photovoltaics, wind and micro-hydro electricity systems) was described. The study focused on small systems, generally less than a few kW installed capacity. It was suggested that in the UK, the emphasis on grid-connected renewable energy technologies (RETs) has blurred the fact that it is 'off-grid' renewable systems that can offer more immediate real commercial markets for the renewables business. With the likelihood of a significant increase in demand for renewables world wide over the next ten years, the UK needs to make a special effort to become involved

  19. 49 CFR 1111.8 - Procedural schedule in stand-alone cost cases.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Procedural schedule in stand-alone cost cases... § 1111.8 Procedural schedule in stand-alone cost cases. (a) Procedural schedule. Absent a specific order by the Board, the following general procedural schedule will apply in stand-alone cost cases: Day 0...

  20. Hydrogen Gas Production in a Stand-Alone Wind Farm

    Directory of Open Access Journals (Sweden)

    M. Naziry Kordkandy

    2017-04-01

    Full Text Available This paper is analyzing the operation of a stand-alone wind farm with variable speed turbines, permanent magnet synchronous generators (PMSG and a system for converting wind energy during wind speed variations. On this paper, the design and modeling of a wind system which uses PMSG’s to provide the required power of a hydrogen gas electrolyzer system, is discussed. This wind farm consists of three wind turbines, boost DC-DC converters, diode full bridge rectifiers, permanent magnet synchronous generators, MPPT control and a hydrogen gas electrolyzer system. The MPPT controller based on fuzzy logic is designed to adjust the duty ratio of the boost DC-DC converters to absorb maximum power. The proposed fuzzy logic controller assimilates, with (PSF MPPT algorithm which generally used to absorb maximum power from paralleled wind turbines and stores it in form of hydrogen gas. The system is modeled and its behavior is studied using the MATLAB software.

  1. DOE and AID stand-alone photovoltaic activities

    Science.gov (United States)

    Bifano, W. J.; Ratajczak, A. F.

    The NASA Lewis Research Center (LeRC) is managing stand-alone photovoltaic (PV) system activities sponsored by the U.S. Department of Energy (DOE) and the U.S. Agency for International Development (AID). The DOE project includes village PV power demonstration projects in Gabon (four sites) and the Marshall Islands, PV-powered medical refrigerators in six countries, PV system microprocessor control development activities and PV-hybrid system assessments. The AID project includes a large village system in Tunisia, a water pumping/grain grinding project in Upper Volta, five medical clinics in four countries, PV-powered remote earth station application. These PV activities and summarizes significant findings to data are reviewed.

  2. Integral type small PWR with stand-alone safety

    International Nuclear Information System (INIS)

    Makihara, Yoshiaki

    2001-01-01

    A feasibility study is achieved on an integral type small PWR with stand-alone safety. It is designed to have the following features. (1) The coolant does not leak out at any accidental condition. (2) The fuel failure does never occur while it is supposed on the large scale PWR at the design base accident. (3) At any accidental condition the safety is secured without any support from the outside (stand-alone safety secure). (4) It has self-regulating characteristics and easy controllability. The above features can be satisfied by integrate the steam generator and CRDM in the reactor vessel while the pipe line break has to be considered on the conventional PWR. Several counter measures are planned to satisfy the above features. The economy feature is also attained by several simplifications such as (1) elimination of main coolant piping and pressurizer by the integration of primary cooling system and self-pressurizing, (2) elimination of RCP by application of natural circulating system, (3) elimination of ECCS and accumulator by application of static safety system, (4) large scale volume reduction of the container vessel by application of integrated primary cooling system, (5) elimination of boric acid treatment by deletion of chemical shim. The long operation period such as 10 years can be attained by the application of Gd fuel in one batch refueling. The construction period can be shortened by the standardizing the design and the introduction of modular component system. Furthermore the applicability of the reduced modulation core is also considered. (K. Tsuchihashi)

  3. The Stand-alone Heliostat; El Heliostato Autonomo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Navajas, G.; Egea Gea, A. [Ciemat. Madrid (Spain)

    2000-07-01

    The first Autonomous Heliostat has been developed by CIEMAT at PSA facilities in Almeria. This heliostat is an innovative approach to reducing the civil engineering work costs in heliostat fields of central tower plants. Channels, cables and other electric elements have been eliminated in the new heliostat. Thus, one 70-m''2, classical T glass/metal heliostat has been adapted to include all the new stand-alone concept components. A PV system is able to drive two sun-tracking DC motors between 5 and 24 Vdc, 0 and 15A. The heliostat communicates with the control room 400-m away by using a radio-modern working at 9600 baud. An anemometer, a wind switcher, light and ambient temperature sensors have been installed on the heliostat for self-protection decision-making. A PV panel integrated into the heliostat reflecting surface, eliminates cabling and other elements required for a conventional power supply. Communication lines between master control and local control have been replaced by radio-modern. Testing has validated the technical feasibility of the prototype and quantified the real consumption and efficiencies of new elements. The extra costs produced by the autonomous concepts are compared with the cost of civil work in conventional heliostat field. (Author) 8 refs.

  4. Improving efficiency of a regional stand alone bone bank.

    Science.gov (United States)

    Warnock, Jonathan M; Rowan, Clare H; Davidson, Helen; Millar, Ciara; McAlinden, M Gavan

    2016-03-01

    The introduction of a stand-alone Bone Bank in our Regional Orthopaedic Hospital has improved the availability of femoral head allograft. Benninger et al. (Bone Joint J 96-B:1307-1311, 2014), demonstrated their institutions bank to be cost effective despite a 30 % discard rate for harvested allograft. We sought to audit our own discard rates and subsequent cost-effectiveness of our bone bank. Donor recruitment. Before approaching a potential donor, our establishment's nurse specialists review their clinical notes and biochemical laboratory results, available on a regional Electronic Care Records. They view femoral head architecture on radiographs against set criteria, Patient Archive and Communication system (SECTRA, Sweden). In total 1383 femoral heads were harvested, 247 were discarded giving an overall rate of 17.9 %. The most common reasons for discard of harvested graft was a positive microbiology/bacteriology result, n = 96 (38.9 %). After a rise in discard rates in 2007, we have steadily reduced our discard rates since 2006/2007 (28.2 %), 2008/2009 (17 %), 2010/2011 (14.8 %), and finally to 10.3 % in 2012/2013. In the current financial year, our cost to harvest, test, store and release a femoral head is £ 610. With a structured donor recruitment process and unique pre-operative radiographic analysis we have successfully reduced our discard rates bi-annually making our bone bank increasingly cost-effective.

  5. A control strategy for PV stand-alone applications

    Science.gov (United States)

    Slouma, S.; Baccar, H.

    2015-04-01

    This paper proposes a stand-alone photovoltaic (PV) system study in domestic applications. Because of the decrease in power of photovoltaic module as a consequence of changes in solar radiation and temperature which affect the photovoltaic module performance, the design and control of DC-DC buck converter was proposed for providing power to the load from a photovoltaic source.In fact, the control of this converter is carried out with integrated MPPT (Maximum Power Point Tracking) algorithm which ensures a maximum energy generated by the PV arrays. Moreover, the output stage is composed by a battery energy storage system, dc-ac inverter, LCL filter which enables higher efficiency, low distortion ac waveforms and low leakage currents. The control strategy adopted is cascade control composed by two regulation loops.Simulations performed with PSIM software were able to validate the control system.The realization and testing of the photovoltaic system were achieved in the Photovoltaic laboratory of the Centre for Research and Energy Technologies at the Technopark Borj Cedria. Experimental results verify the effeciency of the proposed system.

  6. Stand-alone wind system with Vanadium Redox Battery energy storage

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Barote, L.; Weissbach, R.

    2008-01-01

    Energy storage devices are required for power balance and power quality in stand alone wind energy systems. A Vanadium Redox Flow Battery (VRB) system has many features which make its integration with a stand-alone wind energy system attractive. This paper proposes the integration of a VRB system...

  7. Integrated Three-Port DC-DC Converter for Photovoltaic (PV) Battery Stand-alone Systems

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Andersen, Michael A. E.

    2016-01-01

    Several power sources such as PV solar arrays and battery are often used to manage the power flow for a photovoltaic (PV) based stand-alone power system due to the fluctuation nature of solar energy resource, and deliver a continuous power to the users in an appropriate form. Traditionally, three...... for PV and battery stand-alone system....

  8. Integrated versus stand-alone second generation ethanol production from sugarcane bagasse and trash.

    Science.gov (United States)

    Dias, Marina O S; Junqueira, Tassia L; Cavalett, Otávio; Cunha, Marcelo P; Jesus, Charles D F; Rossell, Carlos E V; Maciel Filho, Rubens; Bonomi, Antonio

    2012-01-01

    Ethanol production from lignocellulosic materials is often conceived considering independent, stand-alone production plants; in the Brazilian scenario, where part of the potential feedstock (sugarcane bagasse) for second generation ethanol production is already available at conventional first generation production plants, an integrated first and second generation production process seems to be the most obvious option. In this study stand-alone second generation ethanol production from surplus sugarcane bagasse and trash is compared with conventional first generation ethanol production from sugarcane and with integrated first and second generation; simulations were developed to represent the different technological scenarios, which provided data for economic and environmental analysis. Results show that the integrated first and second generation ethanol production process from sugarcane leads to better economic results when compared with the stand-alone plant, especially when advanced hydrolysis technologies and pentoses fermentation are included. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Stand-alone wind system with Vanadium Redox Battery energy storage

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Barote, L.; Weissbach, R.

    2008-01-01

    Energy storage devices are required for power balance and power quality in stand alone wind energy systems. A Vanadium Redox Flow Battery (VRB) system has many features which make its integration with a stand-alone wind energy system attractive. This paper proposes the integration of a VRB system...... with a typical stand-alone wind energy system during wind speed variation as well as transient performance under variable load. The investigated system consists of a variable speed wind turbine with permanent magnet synchronous generator (PMSG), diode rectifier bridge, buck-boost converter, bidirectional charge...... controller, transformer, inverter, ac loads and VRB (to store a surplus of wind energy and to supply power during a wind power shortage). The main purpose is to supply domestic appliances through a single phase 230V, 50Hz inverter. Simulations are accomplished in order to validate the stability of the supply....

  10. Sensorless direct voltage control of the stand-alone brushless doubly-fed generator

    DEFF Research Database (Denmark)

    Liu, Yi; Xu, Wei; Xiong, Fei

    2017-01-01

    The conventional stand-alone brushless doubly-fed generator (BDFG) control strategies need the feedback from the rotor position or speed sensors, which can reduce system reliability and increase the cost and axial volume of the machine. In this paper, a sensorless direct voltage control (DVC......) strategy is presented for the stand-alone BDFG. The satisfactory dynamic performance is verified by experimental results under four kinds of typical operation conditions. Besides, the proposed control strategy is robust due to no generator parameters being required....

  11. A Current Sensorless MPPT Control Method for a Stand-Alone-Type PV Generation System

    Science.gov (United States)

    Itako, Kazutaka; Mori, Takeaki

    In this paper, a current sensorless MPPT control method for a stand-alone-type PV generation system is proposed. This control method offers advantages of the simplified hardware configuration and the low cost, by using only one sensor to measure the PV output voltage. In the application to stand-alone-type with a battery load, the experimental results show that the estimated values of PV output current are accurate, and the use of the proposed MPPT control increases the PV generated energy by 16.3% compared to the conventional system. Furthermore, it is clarified that the proposed method has extremely high UUF (Useful utilization factor) of 98.7%.

  12. Photovoltaic Module Simulink Model for a Stand-alone PV System

    Science.gov (United States)

    Qi, Chen; Ming, Zhu

    Photovoltaic(PV) Module is indispensable of a stand-alone PV system. In this paper, a one-diode equivalent circuit-based versatile simulation model in the form of masked block PV module is proposed. By the model, it is allowed to estimate behavior of PV module with respect changes on irradiance intensity, ambient temperature and parameters of the PV module. In addition, the model is capable of function of Maximum Power Point Tracking (MPPT) which can be used in the dynamic simulation of stand-alone PV systems.

  13. A control strategy for stand-alone wound rotor induction machine

    Energy Technology Data Exchange (ETDEWEB)

    Forchetti, D.G.; Garcia, G.O. [Grupo de Electronica Aplicada (GEA), Universidad Nacional de Rio Cuarto, X5804 BYA Rio Cuarto (Argentina); Solsona, J.A. [Instituto de Investigaciones en Ingenieria Electrica?Alfredo Desages?, Departamento de Ingenieria Electrica y de Computadoras, Universidad Nacional del Sur, Bahia Blanca (Argentina); Valla, M.I. [Laboratorio de Electronica Industrial, Control e Instrumentacion (LEICI), Facultad de Ingenieria, Universidad Nacional de La Plata, 1900 La Plata (Argentina)

    2007-02-15

    A control strategy to regulate the frequency and voltage of a stand-alone wound rotor induction machine is presented. This strategy allows the machine to work as a generator in stand-alone systems (without grid connection) with variable rotor speed. A stator flux-oriented control is proposed using the rotor voltages as actuation variables. Two cascade control loops are used to regulate the stator flux and the rotor currents. A closed loop observer is designed to estimate the machine flux which is necessary to implement these control loops. The proposed control strategy is validated through simulations with satisfactory results. (author)

  14. Assessment of Stand-Alone Displays for Time Management in a Creativity-Driven Learning Environment

    DEFF Research Database (Denmark)

    Frimodt-Møller, Søren

    2017-01-01

    This paper considers the pros and cons of stand-alone displays, analog (e.g. billboards, blackboards, whiteboards, large pieces of paper etc.) as well as digital (e.g. large shared screens, digital whiteboards or similar), as tools for time management processes in a creativity-driven learning...... to storing information digitally. The findings could indicate a possible market for stand-alone, interactive digital displays combining the ‘touch and feel’ character of an analog board with the convenience of digital data storage....

  15. Stand alone solar energy harvesting and storage systems in off-grid applications

    Science.gov (United States)

    Alonso-Marroquin, Fernando; Gormly, Justin Blake; Bilbao, Jose

    2017-06-01

    The following is an implementation of a stand-alone system for solar energy harvesting and electrical energy storage systems for use in off-grid housing applications. The principal aim of this project was to construct a compact and affordable system for an off-grid house and to monitor its efficiency along the year.

  16. 11kW stand alone wind turbine based on proven wind turbine

    DEFF Research Database (Denmark)

    Bindner, H.; Wodstrup, J.; Andersen, J.

    2004-01-01

    and enable control of frequency and voltage independently on both the grid side and the generator side. The prototype has been installed at Risø. The paper will present results from test runs of the system both operating stand-alone supplying a single load and in parallel operation with a diesel genset....

  17. Linguistic and Structural Analyses of Stand-Alone Literature Reviews: Seventy-Five Years of Change

    Science.gov (United States)

    Wright, Heidi Rachel

    2016-01-01

    The purpose of this dissertation is to offer a multifaceted overview of stand-alone literature reviews. These texts, literature reviews published unattached to research articles, have existed for centuries but remained largely unstudied by linguists. Thus, the goal of this project is to present these reviews' situational, grammatical, and…

  18. Design and Operation Studies of A Stand-Alone PV Generation System

    DEFF Research Database (Denmark)

    Hu, Yanting; Chen, Zhe; Zhang, Donglai

    2013-01-01

    This paper discusses the modeling, design and operation of a PV powered stand-alone system, which includes a PV array, a battery bank, power electronic converters and the associated control system. The design considerations are analyzed and a design platform is presented. Furthermore the operatio...

  19. Clinical outcome of stand-alone ALIF compared to posterior instrumentation for degenerative disc disease

    DEFF Research Database (Denmark)

    Udby, Peter M.; Bech-Azeddine, Rachid

    2015-01-01

    low back pain resulting from degenerative disc disease. ALIF surgery has previously been linked with certain high risk complications and unfavorable long term fusion results. Newer studies suggest that stand-alone ALIF can possibly be advantageous compared to other types of posterior instrumented...

  20. Environmental/Climatic Effect on Stand-Alone Solar Energy Supply ...

    African Journals Online (AJOL)

    This paper investigates the climatic eects and environmental variations on the performance of a stand-alone photovoltaic system. The eects of partial shading with dierent climate conditions and load resistance variations were examined. A survey of some of the work done in this eld of environmental eect on solar panel was ...

  1. MOSFET Loss Evaluation for a Low-Power Stand-Alone Photovoltaic-LED System

    DEFF Research Database (Denmark)

    Mira Albert, Maria del Carmen; Knott, Arnold; Andersen, Michael A. E.

    2015-01-01

    This paper presents a performance evaluation and comparison of state-of-the-art low voltage Si MOSFETs for a stand-alone photovoltaic-LED Light to Light (LtL) system. The complete system is formed by two cascaded converters that will be optimized for a determined solar irradiation and LED...

  2. Integrated Three-Port DC-DC Converter for Photovoltaic (PV) Battery Stand-alone Systems

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Andersen, Michael A. E.

    2016-01-01

    Several power sources such as PV solar arrays and battery are often used to manage the power flow for a photovoltaic (PV) based stand-alone power system due to the fluctuation nature of solar energy resource, and deliver a continuous power to the users in an appropriate form. Traditionally, three...

  3. Stand-alone version of the 11kW Gaia wind turbine

    DEFF Research Database (Denmark)

    Bindner, H.; Rosas, P.A.C.; Teodorescu, R.

    2004-01-01

    This report describes the development of a stand-alone version of the 11kW Gaia wind turbine. Various possible configurations are investigated and a configuration using a back-to-back converter is chosen. A model is developed for controller design of thefast controllers of the unit. Controllers...... assessment and controller design a dynamic performance assessment model has been developed....

  4. A maximum power point tracking scheme for a 1kw stand-alone ...

    African Journals Online (AJOL)

    A maximum power point tracking scheme for a 1kw stand-alone solar energy based power supply. ... This paper elucidates one of the tracking schemes for a photovoltaic (PV) systems using Cuk converter operating in discontinuous inductor current mode (DICM) as an interface. A method for efficiently maximizing the output ...

  5. Analysis and controller design for stand-alone VSIs in synchronous reference frame

    DEFF Research Database (Denmark)

    Ramezani, Malek; Li, Shuhui; Golestan, Saeed

    2017-01-01

    The common practice for controlling the stand-alone voltage source inverters (VSIs) is to transform abc voltage and current signals to DC signals using the dq transformation, which makes it possible to control the new DC voltage and current signals just using simple proportional-integral controll...

  6. A Control Method for Maximum Power Point Tracking in Stand-Alone-Type PV Generation Systems

    Science.gov (United States)

    Itako, Kazutaka; Mori, Takeaki

    In this paper, a new control method for maximum power point tracking (MPPT) in stand-alone-type PV generaton systems is proposed. In this control method, the operations detecting the maximum power point and tracking its point are alternately carried out by using a step-up DC—DC converter. This method requires neither the measurement of temperature and insolation level nor PV array model. In a stand-alone-type application with a battery load, the design method for the boost inductance L of the step-up DC—DC converter is described, and the experimental results show that the use of the proposed MPPT control increases the PV generated energy by 14.8% compared to the conventional system.

  7. Graft subsidence as a predictor of revision surgery following stand-alone lateral lumbar interbody fusion.

    Science.gov (United States)

    Tempel, Zachary J; McDowell, Michael M; Panczykowski, David M; Gandhoke, Gurpreet S; Hamilton, D Kojo; Okonkwo, David O; Kanter, Adam S

    2018-01-01

    OBJECTIVE Lateral lumbar interbody fusion (LLIF) is a less invasive surgical option commonly used for a variety of spinal conditions, including in high-risk patient populations. LLIF is often performed as a stand-alone procedure, and may be complicated by graft subsidence, the clinical ramifications of which remain unclear. The aim of this study was to characterize further the sequelae of graft subsidence following stand-alone LLIF. METHODS A retrospective review of prospectively collected data was conducted on consecutive patients who underwent stand-alone LLIF between July 2008 and June 2015; 297 patients (623 levels) met inclusion criteria. Imaging studies were examined to grade graft subsidence according to Marchi criteria, and compared between those who required revision surgery and those who did not. Additional variables recorded included levels fused, DEXA (dual-energy x-ray absorptiometry) T-score, body mass index, and routine demographic information. The data were analyzed using the Student t-test, chi-square analysis, and logistic regression analysis to identify potential confounding factors. RESULTS Of 297 patients, 34 (11.4%) had radiographic evidence of subsidence and 18 (6.1%) required revision surgery. The median subsidence grade for patients requiring revision surgery was 2.5, compared with 1 for those who did not. Chi-square analysis revealed a significantly higher incidence of revision surgery in patients with high-grade subsidence compared with those with low-grade subsidence. Seven of 18 patients (38.9%) requiring revision surgery suffered a vertebral body fracture. High-grade subsidence was a significant predictor of the need for revision surgery (p subsidence following stand-alone LLIF required revision surgery. When evaluating patients for LLIF, supplemental instrumentation should be considered during the index surgery in patients with a significant risk of graft subsidence.

  8. A Three-Port Topology Comparison for a Low Power Stand-Alone Photovoltaic System

    DEFF Research Database (Denmark)

    Mira Albert, Maria del Carmen; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    Three-port converter (TPC) topologies for renewable energy systems aim to provide higher efficiency and power density than conventional cascaded structures. This work proposes an analytical comparison of different TPC topologies for a photovoltaic LED lamp stand-alone system. A comparison using...... component stress factor (CSF) is performed, which gives a quantitative measure of the performance of the converter. The candidate topologies are compared to each other according to a defined LED lighting strategy and a solar irradiation profile....

  9. Secure stand alone positive personnel identity verification system (SSA-PPIV)

    International Nuclear Information System (INIS)

    Merillat, P.D.

    1979-03-01

    The properties of a secure stand-alone positive personnel identity verification system are detailed. The system is designed to operate without the aid of a central computing facility and the verification function is performed in the absence of security personnel. Security is primarily achieved by means of data encryption on a magnetic stripe badge. Several operational configurations are discussed. Advantages and disadvantages of this system compared to a central computer driven system are detailed

  10. Modeling, Design and Simulation of Stand-Alone Photovoltaic Power Systems with Battery Storage

    Directory of Open Access Journals (Sweden)

    Abd Essalam BADOUD

    2013-06-01

    Full Text Available Stand alone renewable energy based on photovoltaic systems accompanied with battery storage system are beginning to play an important role over the world to supply power to remote areas. The objective of the study reported in this paper is to elaborate and design a bond graphs model for sizing stand-alone domestic solar photovoltaic electricity systems and simulating the performance of the systems in a tropical climate. The systems modelled consist of an array of PV modules, a lead-acid battery, and a number of direct current appliances. This paper proposes the combination of lead acid battery system with a typical stand alone photovoltaic energy system under variable loads. The main activities of this work purpose to establish library graphical models for each individual component of standalone photovoltaic system. Control strategy has been considered to achieve permanent power supply to the load via photovoltaic/battery based on the power available from the sun. The complete model was simulated under two testing including sunny and cloudy conditions. Simulation of the system using Symbols software was performed and the results of simulation show the superior stable control system and high efficiency. These results have been contrasted with real measured data from a measurement campaign plant carried on electrical engineering laboratory of Grenoble using various interconnection schemes are presented.

  11. Subsidence after single-level anterior cervical fusion with a stand-alone cage.

    Science.gov (United States)

    Park, Jae-Young; Choi, Ki-Young; Moon, Bong Ju; Hur, Hyuk; Jang, Jae-Won; Lee, Jung-Kil

    2016-11-01

    To investigate the risk factors for subsidence in patients treated with stand-alone anterior cervical discectomy and fusion (ACDF) using polyetheretherketone (PEEK) cages for single-level degenerative cervical disease. Seventy-seven consecutive patients who underwent single-level stand-alone ACDF with a PEEK cage between 2005 and 2012 were included. Subsidence was defined as a decrease in the interbody height of more than 3mm on radiographs at the 1-year follow-up compared with that in the immediate post-operative image. Patients were divided into the subsidence and non-subsidence groups. The following factors were investigated in relation to the occurrence of subsidence: age, pre-operative overall cervical sagittal angle, segmental angle of the operated level, interbody height, cage height, cage devices and cage location (distance between anterior margin of the body endplate and that of the cage). The clinical outcomes were assessed with visual analog scale, modified Japanese Orthopedic Association score and neck disability index. Twenty-six out of the 77 (33.8%) patients had radiological signs of cage subsidence. Solid fusion was achieved in 25 out of the 26 patients (96.2%) in the subsidence group and in 47 out of the 51 patients (92.2%) in the non-subsidence group. More than 3mm distance between anterior margin of the vertebral body and that of the cage was significantly associated with subsidence (psubsidence did not correlate with fusion rate or clinical outcomes. Cage location was the only significant risk factor. Therefore, cage location should be taken into consideration during stand-alone ACDF using PEEK cages. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. A Simple Sizing Algorithm for Stand-Alone PV/Wind/Battery Hybrid Microgrids

    Directory of Open Access Journals (Sweden)

    Jing Li

    2012-12-01

    Full Text Available In this paper, we develop a simple algorithm to determine the required number of generating units of wind-turbine generator and photovoltaic array, and the associated storage capacity for stand-alone hybrid microgrid. The algorithm is based on the observation that the state of charge of battery should be periodically invariant. The optimal sizing of hybrid microgrid is given in the sense that the life cycle cost of system is minimized while the given load power demand can be satisfied without load rejection. We also report a case study to show the efficacy of the developed algorithm.

  13. Stand-alone and Interdisciplinary Course Design for Engineering Education for Sustainable Development

    DEFF Research Database (Denmark)

    Arsat, M.; Holgaard, Jette Egelund; de Graaff, Erik

    In order to embed ESD in the EE curriculum, several approaches has been introduced and practiced in higher education institutions. One of the approaches is to introduce a new ESD course as an add-on to the existing curriculum being either compulsory or elective and either designed for a single...... and reported examples of other ESD courses of the same kind. The presented conceptual framework is put to practice, characterising the AAU course as a stand-alone interdisciplinary course with a consensual approach. The conclusion is that the conceptual framework can provide an awareness of the design features...

  14. Information systems for the materials management department: stand-alone and enterprise resource planning systems.

    Science.gov (United States)

    2005-03-01

    Materials management information systems (MMISs) incorporate information tools that hospitals can use to automate certain business processes, increase staff compliance with these processes, and identify opportunities for cost savings. Recently, there has been a push by hospital administration to purchase enterprise resource planning (ERP) systems, information systems that promise to integrate many more facets of healthcare business. We offer this article to help materials managers, administrators, and others involved with information system selection understand the changes that have taken place in materials management information systems, decide whether they need a new system and, if so, whether a stand-alone MMIS or an ERP system will be the best choice.

  15. Solar Photovoltaic Applications Seminar: Design, installation and operation of small, stand-alone photovoltaic power systems

    Science.gov (United States)

    1980-07-01

    An introduction to photoconductivity, semiconductors, and solar photovoltaic cells is included along with a demonstration of specific applications and application identification. Small solar cell power system design engineering is discussed. Solar PV power system applications involve classical direct electrical energy conversion and electric power system analysis and synthesis. Presentations and examples involve a variety of disciplines including structural analysis, electric power and load analysis, reliability, sizing and optimization; and, installation, operation and maintenance. Four specific system designs are demonstrated: water pumping; domestic uses; navigational and aircraft aids; and telecommunications. All of the applications discussed are for small power requirement (under 2 kilowatts), stand alone systems to be used in remote locations.

  16. Incidence and impact of implant subsidence after stand-alone lateral lumbar interbody fusion.

    Science.gov (United States)

    Bocahut, N; Audureau, E; Poignard, A; Delambre, J; Queinnec, S; Flouzat Lachaniette, C-H; Allain, J

    2017-12-30

    Few data are available on the occurrence after stand-alone lateral lumbar interbody fusion (LLIF) of implant subsidence, whose definition and incidence vary across studies. The primary objective of this work was to determine the incidence of subsidence 1 year postoperatively, using an original measurement method, whose validity was first assessed. The secondary objective was to assess the clinical impact of subsidence. Implant subsidence after stand-alone LLIF is a common complication that can adversely affect clinical outcomes. Of 69 included patients who underwent stand-alone LLIF, 67 (97%) were re-evaluated at least 1 year later. Furthermore, 63 (91%) patients had two available computed tomography (CT) scans for assessing subsidence, one performed immediately after surgery and the other 1 year later. Reproducibility of the original measurement method was assessed in a preliminary study. Subsidence was defined as at least 4mm loss of fused space height. The incidence of subsidence was 32% (20 patients). Subsidence was global in 7 (11%) patients and partial in 13 (21%) patients. Mean loss of height was 5.5±1.5mm. Subsidence predominated anteriorly in 50% of cases. The lordotic curvature of the fused segment was altered in 50% of patients, by a mean of 8°±3°. Fusion was achieved in 67/69 (97%) patients. The Oswestry score and visual analogue scale scores for low-back and nerve-root pain were significantly improved after 1 year in the overall population and in the groups with and without subsidence. Reproducibility of our measurement method was found to be excellent. Subsidence was common but without significant clinical effects after 1 year. Nevertheless, subsidence can be associated with pain and can result in loss of lumbar lordosis, which is a potential risk factor for degenerative disease of the adjacent segments. A score for predicting the risk of subsidence will now be developed by our group as a tool for improving patient selection to stand-alone LLIF

  17. Boost converter with combined control loop for a stand-alone photovoltaic battery charge system

    DEFF Research Database (Denmark)

    Mira Albert, Maria del Carmen; Knott, Arnold; Thomsen, Ole Cornelius

    2013-01-01

    frequency avoids perturbations in the load being propagated to the photovoltaic panel and thus deviating the operating point. Linearization of the photovoltaic panel and converter state-space modeling is performed. In order to achieve stable operation under all operating conditions, the photovoltaic panel......The converter control scheme plays an important role in the performance of maximum power point tracking (MPPT) algorithms. In this paper, an input voltage control with double loop for a stand-alone photovoltaic system is designed and tested. The inner current control loop with high crossover...

  18. Semantic Desktop

    Science.gov (United States)

    Sauermann, Leo; Kiesel, Malte; Schumacher, Kinga; Bernardi, Ansgar

    In diesem Beitrag wird gezeigt, wie der Arbeitsplatz der Zukunft aussehen könnte und wo das Semantic Web neue Möglichkeiten eröffnet. Dazu werden Ansätze aus dem Bereich Semantic Web, Knowledge Representation, Desktop-Anwendungen und Visualisierung vorgestellt, die es uns ermöglichen, die bestehenden Daten eines Benutzers neu zu interpretieren und zu verwenden. Dabei bringt die Kombination von Semantic Web und Desktop Computern besondere Vorteile - ein Paradigma, das unter dem Titel Semantic Desktop bekannt ist. Die beschriebenen Möglichkeiten der Applikationsintegration sind aber nicht auf den Desktop beschränkt, sondern können genauso in Web-Anwendungen Verwendung finden.

  19. Feasibility and Optimal Design of a Stand-Alone Photovoltaic Energy System for the Orphanage

    Directory of Open Access Journals (Sweden)

    Vincent Anayochukwu Ani

    2014-01-01

    Full Text Available Access to electricity can have a positive psychological impact through a lessening of the sense of exclusion, and vulnerability often felt by the orphanages. This paper presented the simulation and optimization study of a stand-alone photovoltaic power system that produced the desired power needs of an orphanage. Solar resources for the design of the system were obtained from the National Aeronautics and Space Administration (NASA Surface Meteorology and Solar Energy website at a location of 6°51′N latitude and 7°35′E longitude, with annual average solar radiation of 4.92 kWh/m2/d. This study is based on modeling, simulation, and optimization of energy system in the orphanage. The patterns of load consumption within the orphanage were studied and suitably modeled for optimization. Hybrid Optimization Model for Electric Renewables (HOMER software was used to analyze and design the proposed stand-alone photovoltaic power system model. The model was designed to provide an optimal system configuration based on an hour-by-hour data for energy availability and demands. A detailed design, description, and expected performance of the system were presented in this paper.

  20. Coordination Control Strategy for AC/DC Hybrid Microgrids in Stand-Alone Mode

    Directory of Open Access Journals (Sweden)

    Dwi Riana Aryani

    2016-06-01

    Full Text Available Interest in DC microgrids is rapidly increasing along with the improvement of DC power technology because of its advantages. To support the integration process of DC microgrids with the existing AC utility grids, the form of hybrid AC/DC microgrids is considered for higher power conversion efficiency, lower component cost and better power quality. In the system, AC and DC portions are connected through interlink bidirectional AC/DC converters (IC with a proper control system and power management. In the stand-alone operation mode of AC/DC hybrid microgrids, the control of power injection through the IC is crucial in order to maintain the system security. This paper mainly deals with a coordination control strategy of IC and a battery energy storage system (BESS converter under stand-alone operation. A coordinated control strategy for the IC, which considers the state of charge (SOC level of BESS and the load shedding scheme as the last resort, is proposed to obtain better power sharing between AC and DC subgrids. The scheme will be tested with a hybrid AC/DC microgrid, using the tool of the PSCAD/EMTDC software.

  1. Fuzzy logic control of stand-alone photovoltaic system with battery storage

    Science.gov (United States)

    Lalouni, S.; Rekioua, D.; Rekioua, T.; Matagne, E.

    Photovoltaic energy has nowadays an increased importance in electrical power applications, since it is considered as an essentially inexhaustible and broadly available energy resource. However, the output power provided via the photovoltaic conversion process depends on solar irradiation and temperature. Therefore, to maximize the efficiency of the photovoltaic energy system, it is necessary to track the maximum power point of the PV array. The present paper proposes a maximum power point tracker (MPPT) method, based on fuzzy logic controller (FLC), applied to a stand-alone photovoltaic system. It uses a sampling measure of the PV array power and voltage then determines an optimal increment required to have the optimal operating voltage which permits maximum power tracking. This method carries high accuracy around the optimum point when compared to the conventional one. The stand-alone photovoltaic system used in this paper includes two bi-directional DC/DC converters and a lead-acid battery bank to overcome the scare periods. One converter works as an MPP tracker, while the other regulates the batteries state of charge and compensates the power deficit to provide a continuous delivery of energy to the load. The Obtained simulation results show the effectiveness of the proposed fuzzy logic controller.

  2. International market assessment of stand-alone photovoltaic power systems for cottage industry applications

    Science.gov (United States)

    Philippi, T. M.

    1981-01-01

    The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

  3. A sizing method for stand-alone PV installations with variable demand

    Energy Technology Data Exchange (ETDEWEB)

    Posadillo, R. [Grupo de Investigacion en Energias y Recursos Renovables, Dpto. de Fisica Aplicada, E.P.S., Universidad de Cordoba, Avda. Menendez Pidal s/n, 14004 Cordoba (Spain); Lopez Luque, R. [Grupo de Investigacion de Fisica Para las Energias y Recursos Renovables, Dpto. de Fisica Aplicada, Edificio C2 Campus de Rabanales, 14071 Cordoba (Spain)

    2008-05-15

    The practical applicability of the considerations made in a previous paper to characterize energy balances in stand-alone photovoltaic systems (SAPV) is presented. Given that energy balances were characterized based on monthly estimations, the method is appropriate for sizing installations with variable monthly demands and variable monthly panel tilt (for seasonal estimations). The method presented is original in that it is the only method proposed for this type of demand. The method is based on the rational utilization of daily solar radiation distribution functions. When exact mathematical expressions are not available, approximate empirical expressions can be used. The more precise the statistical characterization of the solar radiation on the receiver module, the more precise the sizing method given that the characterization will solely depend on the distribution function of the daily global irradiation on the tilted surface H{sub g{beta}}{sub i}. This method, like previous ones, uses the concept of loss of load probability (LLP) as a parameter to characterize system design and includes information on the standard deviation of this parameter ({sigma}{sub LLP}) as well as two new parameters: annual number of system failures (f) and the standard deviation of annual number of system failures ({sigma}{sub f}). This paper therefore provides an analytical method for evaluating and sizing stand-alone PV systems with variable monthly demand and panel inclination. The sizing method has also been applied in a practical manner. (author)

  4. Method to size photovoltaic arrays for hydrogen-PV stand-alone power stations

    Energy Technology Data Exchange (ETDEWEB)

    Barra, L.; Coiante, D. [ENEA, Casaccia (Italy). Area Energetica

    1993-11-01

    With reference to a stand alone power plant configuration, a photovoltaic (PV) system, integrated with an electrolytic hydrogen production and fuel cell reconversion line, is examined with the aim of checking the possibility of assuring energy supply for a given load with time continuity. In order to size the PV array in function of the annual load diagram, for a given site, a method, which utilizes the monthly average values of sun energy density collected on horizontal surface as input data, is presented. The results demonstrate that a PV-H{sub 2} system is suitable for a modular stand alone solar power station, able to supply continuously each generic load. This technical acquisition has to be considered as the first necessary condition to get photovoltaics to overcome the limit due to working intermittence and become a real energy option. An example of an application for a small Mediterranean island, the Volcano Island, permanently inhabited by 469 people, is also discussed. This typical case can be actually show the technical viability of the PV-H{sub 2} solution in powering a small community with the required reliability.

  5. Robust Power Management Control for Stand-Alone Hybrid Power Generation System

    International Nuclear Information System (INIS)

    Kamal, Elkhatib; Adouane, Lounis; Aitouche, Abdel; Mohammed, Walaa

    2017-01-01

    This paper presents a new robust fuzzy control of energy management strategy for the stand-alone hybrid power systems. It consists of two levels named centralized fuzzy supervisory control which generates the power references for each decentralized robust fuzzy control. Hybrid power systems comprises: a photovoltaic panel and wind turbine as renewable sources, a micro turbine generator and a battery storage system. The proposed control strategy is able to satisfy the load requirements based on a fuzzy supervisor controller and manage power flows between the different energy sources and the storage unit by respecting the state of charge and the variation of wind speed and irradiance. Centralized controller is designed based on If-Then fuzzy rules to manage and optimize the hybrid power system production by generating the reference power for photovoltaic panel and wind turbine. Decentralized controller is based on the Takagi-Sugeno fuzzy model and permits us to stabilize each photovoltaic panel and wind turbine in presence of disturbances and parametric uncertainties and to optimize the tracking reference which is given by the centralized controller level. The sufficient conditions stability are formulated in the format of linear matrix inequalities using the Lyapunov stability theory. The effectiveness of the proposed Strategy is finally demonstrated through a SAHPS (stand-alone hybrid power systems) to illustrate the effectiveness of the overall proposed method. (paper)

  6. Photovoltaic OLED Driver for Low-Power Stand-Alone Light-to-Light Systems

    DEFF Research Database (Denmark)

    Ploug, Rasmus Overgaard; Knott, Arnold

    2016-01-01

    Photovoltaic (PV) stand-alone systems need to achieve multiple energy conversion modes. I.e. the energy conversion from PV to a local energy storage as well as energy conversion from the energy storage to the load. This paper documents the practical design considerations for the development of a ...... conversion from photovoltaic panel to the battery, and 97 % in the area 1.4 W to 2 W for power delivery to the OLED.......Photovoltaic (PV) stand-alone systems need to achieve multiple energy conversion modes. I.e. the energy conversion from PV to a local energy storage as well as energy conversion from the energy storage to the load. This paper documents the practical design considerations for the development...... of a three-port-converter for this purpose optimized for the specifications for driving an Organic Light Emitting Diode (OLED) panel intended for lighting purposes. By using a three-port-converter, featuring shared components for each conversion mode, the converter reaches 97 % efficiency at 1.8 W during...

  7. Modified Chaos Particle Swarm Optimization-Based Optimized Operation Model for Stand-Alone CCHP Microgrid

    Directory of Open Access Journals (Sweden)

    Fei Wang

    2017-07-01

    Full Text Available The optimized dispatch of different distributed generations (DGs in stand-alone microgrid (MG is of great significance to the operation’s reliability and economy, especially for energy crisis and environmental pollution. Based on controllable load (CL and combined cooling-heating-power (CCHP model of micro-gas turbine (MT, a multi-objective optimization model with relevant constraints to optimize the generation cost, load cut compensation and environmental benefit is proposed in this paper. The MG studied in this paper consists of photovoltaic (PV, wind turbine (WT, fuel cell (FC, diesel engine (DE, MT and energy storage (ES. Four typical scenarios were designed according to different day types (work day or weekend and weather conditions (sunny or rainy in view of the uncertainty of renewable energy in variable situations and load fluctuation. A modified dispatch strategy for CCHP is presented to further improve the operation economy without reducing the consumers’ comfort feeling. Chaotic optimization and elite retention strategy are introduced into basic particle swarm optimization (PSO to propose modified chaos particle swarm optimization (MCPSO whose search capability and convergence speed are improved greatly. Simulation results validate the correctness of the proposed model and the effectiveness of MCPSO algorithm in the optimized operation application of stand-alone MG.

  8. Stand-alone anterior lumbar interbody fusion for treatment of degenerative spondylolisthesis.

    Science.gov (United States)

    Rao, Prashanth J; Ghent, Finn; Phan, Kevin; Lee, Keegan; Reddy, Rajesh; Mobbs, Ralph J

    2015-10-01

    We sought to evaluate the clinical and radiologic efficacy of stand-alone anterior lumbar interbody fusion (ALIF) for low grade degenerative spondylolisthesis, the favoured surgical management approach at our institution. The optimal approach for surgical management of spondylolisthesis remains contentious. We performed a prospective analysis of all consecutive patients with low grade lumbar spondylolisthesis who underwent ALIF between 2009 and 2013 by a single surgeon (n=27). The mean age was 64.9 years with a male to female ratio of 14:13. There were 32 levels operated and the average preoperative spondylolisthesis was 14.8%, which reduced to 6.4% postoperatively and 9.4% at the latest follow-up (p=0001). Postoperative disc height was increased to 175% of preoperative values and was statistically significant (pspondylolisthesis reduction (p=0.04) and the only clinical factor affecting reduction was body mass index (p=0.04). The present study provides encouraging short term results for stand-alone ALIF as a procedure for low grade lumbar degenerative spondylolisthesis. Future studies should include adequately powered, prospective, multicentre registry studies with long term follow-up to allow a better assessment of the relative benefits and risks. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. International market assessment of stand-alone photovoltaic power systems for cottage industry applications

    Science.gov (United States)

    Philippi, T. M.

    1981-11-01

    The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

  10. Design of a Stand-Alone Photovoltaic Model for Home Lightings and Clean Environment

    International Nuclear Information System (INIS)

    Ani, Vincent Anayochukwu

    2016-01-01

    This paper gives a well-documented health risk of fuel-based lighting (kerosene lamps and fuel-powered generators) and proposed a design of a stand-alone solar PV system for sustainable home lightings in rural Nigerian area. The design was done in three different patterns of electricity consumptions with energy efficient lightings (EELs) using two different battery types (Rolls Surrette 6CS25PS and Hoppecke 10 OpzS 1000) on; (i) judicious power consumption, (ii) normal power consumption, and (iii) excess power consumption; and compared them with the incandescent light bulb consumption. The stand-alone photovoltaic energy systems were designed to match the rural Nigerian sunlight and weather conditions to meet the required lightings of the household. The objective function and constraints for the design models were formulated and optimization procedures were used to demonstrate the best solution (reliability at the lowest lifecycle cost). Initial capital costs as well as annualized costs over 5, 10, 15, 20, and 25 years were quantified and documented. The design identified the most cost-effective and reliable solar and battery array among the patterns of electricity consumption with EEL options (judicious power consumption, normal power consumption, and excess power consumption).

  11. Simulation of stand alone PV systems; Dokuritsugata taiyoko hatsuden system no simulation

    Energy Technology Data Exchange (ETDEWEB)

    Tsuda, I.; Sakuta, K. [Electrotechnical Laboratory, Tsukuba (Japan); Oshiro, T. [Japan Quality Assurance Organization, Tokyo (Japan); Kurokawa, K. [Tokyo University of Agriculture and Technology, Tokyo (Japan)

    1997-11-25

    Studies are performed to develop a simulation program for a stand-alone photovoltaic power generation system equipped with a lead acid battery. In this stand-alone photovoltaic power generation system, the load is connected in shunt with the solar cell array output through the intermediary of a lead acid battery and inverter. The program is a model in which the solar cell model is built taking parallel resistance into account, and the temperature-dependence of the constants is described using approximations experimentally obtained by Solar Techno Center of JQA (Japan Quality Assurance Organization), Hamamatsu. Insolation data for the model is described using METPV compiled by Japan Weather Association, and load data is described using data actually measured at Shizuoka. This program is compared with the data of operation at Hamamatsu, and the result is almost satisfactory. Simulations are conducted at five typical locations in Japan using this program, and it is found that the array load matching correction factor is dependent on seasonal changes rather than locality, that the battery contribution rate does not change much throughout the year, and that it is not dependent on locality. 5 refs., 7 figs., 3 tabs.

  12. Design of a Stand-Alone Photovoltaic (PV Models for Home Lightings and Clean Environment

    Directory of Open Access Journals (Sweden)

    Vincent Anayochukwu Ani

    2016-01-01

    Full Text Available This paper gives a well-documented health risks of fuel-based lighting (kerosene lamps and fuel-powered generators and proposed a design of a stand-alone solar PV system for sustainable home lightings in rural Nigerian area. The design was done in three different patterns of electricity consumptions with energy efficient lightings (EELs using two different battery types (Rolls Surrette 6CS25PS and hoppecke 10 OpzS 1000 on; i judicious power consumption, ii normal power consumption, iii excess power consumption; and compared them with the incandescent light bulb consumption. The stand-alone photovoltaic energy systems were designed to match the rural Nigerian sunlight and weather conditions to meet the required lightings of the household. The objective function and constraints for the design models were formulated and optimization procedure were used to demonstrate the best solution (reliability at the lowest lifecycle cost. Initial capital costs as well as annualized costs over 5, 10, 15, 20, and 25 years were quantified and documented. The design identified the most cost-effective and reliable solar and battery array among the patterns of electricity consumption with energy efficient lighting options (judicious power consumption, normal power consumption, and excess power consumption.

  13. Design of Stand-Alone Hybrid Power Generation System at Brumbun Beach Tulungagung East Java

    Science.gov (United States)

    Rahmat, A. N.; Hidayat, M. N.; Ronilaya, F.; Setiawan, A.

    2018-04-01

    Indonesian government insists to optimize the use of renewable energy resources in electricity generation. One of the efforts is launching Independent Energy Village plan. This program aims to fulfill the need of electricity for isolated or remote villages in Indonesia. In order to support the penetration of renewable energy resources in electricity generation, a hybrid power generation system is developed. The simulation in this research is based on the availability of renewable energy resources in Brumbun beach, Tulungagung, East Java. Initially, the electricity was supplied through stand-alone electricity generations which are installed at each house. Hence, the use of electricity between 5 p.m. – 9 p.m. requires high operational costs. Based on the problem above, this research is conducted to design a stand-alone hybrid electricity generation system, which may consist of diesel, wind, and photovoltaic. The design is done by using HOMER software to optimize the use of electricity from renewable resources and to reduce the operation of diesel generation. The combination of renewable energy resources in electricity generation resulted in NPC of 44.680, COE of 0,268, and CO2 emissions of 0,038 % much lower than the use of diesel generator only.

  14. Subsidence and nonunion after anterior cervical interbody fusion using a stand-alone polyetheretherketone (PEEK) cage.

    Science.gov (United States)

    Yang, Jae Jun; Yu, Chang Hun; Chang, Bong-Soon; Yeom, Jin Sup; Lee, Jae Hyup; Lee, Choon-Ki

    2011-03-01

    The purposes of the present study are to evaluate the subsidence and nonunion that occurred after anterior cervical discectomy and fusion using a stand-alone intervertebral cage and to analyze the risk factors for the complications. Thirty-eight patients (47 segments) who underwent anterior cervical fusion using a stand-alone polyetheretherketone (PEEK) cage and an autologous cancellous iliac bone graft from June 2003 to August 2008 were enrolled in this study. The anterior and posterior segmental heights and the distance from the anterior edge of the upper vertebra to the anterior margin of the cage were measured on the plain radiographs. Subsidence was defined as ≥ a 2 mm (minor) or 3 mm (major) decrease of the segmental height at the final follow-up compared to that measured at the immediate postoperative period. Nonunion was evaluated according to the instability being ≥ 2 mm in the interspinous distance on the flexion-extension lateral radiographs. The anterior and posterior segmental heights decreased from the immediate postoperative period to the final follow-up at 1.33 ± 1.46 mm and 0.81 ± 1.27 mm, respectively. Subsidence ≥ 2 mm and 3 mm were observed in 12 segments (25.5%) and 7 segments (14.9%), respectively. Among the expected risk factors for subsidence, a smaller anteroposterior (AP) diameter (14 mm vs. 12 mm) of cages (p = 0.034; odds ratio [OR], 0.017) and larger intraoperative distraction (p = 0.041; OR, 3.988) had a significantly higher risk of subsidence. Intervertebral nonunion was observed in 7 segments (7/47, 14.9%). Compared with the union group, the nonunion group had a significantly higher ratio of two-level fusion to one-level fusions (p = 0.001). Anterior cervical fusion using a stand-alone cage with a large AP diameter while preventing anterior intraoperative over-distraction will be helpful to prevent the subsidence of cages. Two-level cervical fusion might require more careful attention for avoiding nonunion.

  15. Charactrization of a Li-ion battery based stand-alone a-Si photovoltaic system

    International Nuclear Information System (INIS)

    Hamid Vishkasougheh, Mehdi; Tunaboylu, Bahadir

    2014-01-01

    Highlights: • An Li-ion battery based stand-alone a-Si PV was designed. The system composed of three a-Si panels with an efficiency of 7% and 40 cells of LFP batteries. • Effects of solar radiation and environmental temperature for three cities, Istanbul, Ankara, and Adana, have been investigated on a-Si panels. • Using transition formulas BSPV outputs are predictable for any location out of standard test condition. - Abstract: The number of photovoltaic (PV) system installations is increasing rapidly. As more people learn about this versatile and often cost-effective power option, this trend will accelerate. This document presents a recommended design for a battery based stand-alone photovoltaic system (BSPV). BSPV system has the ability to be applied in different areas, including warning signals, lighting, refrigeration, communication, residential water pumping, remote sensing, and cathodic protection. The presented calculation method gives a proper idea for a system sizing technique. Based on application load, different scenarios are possible for designing a BSPV system. In this study, a battery based stand-alone system was designed. The electricity generation part is three a-Si panels, which are connected in parallel, and for the storage part LFP (lithium iron phosphate) battery was used. The high power LFP battery packs are 40 cells each 8S5P (configured 8 series 5 parallel). Each individual pack weighs 0.5 kg and is 25.6 V. In order to evaluate the efficiency of a-Si panels with respect to the temperature and the solar irradiation, cities of Istanbul, Ankara and Adana in Turkey were selected. Temperature and solar irradiation were gathered from reliable sources and by using translation equations, current and voltage output of panels were calculated. As a result of these calculations, current and energy outputs were computed by considering an average efficient solar irradiation time value per day in Turkey. The calculated power values were inserted to a

  16. Desktop Genetics.

    Science.gov (United States)

    Hough, Soren H; Ajetunmobi, Ayokunmi; Brody, Leigh; Humphryes-Kirilov, Neil; Perello, Edward

    2016-11-01

    Desktop Genetics is a bioinformatics company building a gene-editing platform for personalized medicine. The company works with scientists around the world to design and execute state-of-the-art clustered regularly interspaced short palindromic repeats (CRISPR) experiments. Desktop Genetics feeds the lessons learned about experimental intent, single-guide RNA design and data from international genomics projects into a novel CRISPR artificial intelligence system. We believe that machine learning techniques can transform this information into a cognitive therapeutic development tool that will revolutionize medicine.

  17. Stand-alone differential capacitance force sensors with sub-nano-newton sensitivity

    Science.gov (United States)

    Ye, Jilong; Sun, Taotao; Huang, Dong; Li, Zhihong; Lin, Li

    2017-09-01

    This paper presents structure design, microfabrication processes, calibration techniques and experimental results of differential capacitance force sensors with features of sub-nano-newton sensitivity, up to 10 000 Hz sampling rate, and applicability as stand-alone devices. The representative sensor demonstrates a force resolution of 0.11 nN at a 19 Hz sampling rate or 1.47 nN at 10 000 Hz. A novel asymmetric differential capacitance structure proposed results in remarkable increase in the ratio of measurement range to resolution in comparison with traditional symmetric structure. In addition, the stiction between silicon and glass caused by the capillary force during dicing is eliminated by the use of hydrophobization treatment. Such a treatment is essential to successfully fabricate structures with a large ratio of overlapped area to gap in silicon/glass anodic bonding processes.

  18. Lossy Data Aggregation with Network Coding in Stand-Alone Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Madsen, Tatiana Kozlova

    2011-01-01

    This work focuses on a special type of wireless sensor networks (WSNs) that we refer to as a stand alone network. These netwoks operate in harsh and extreme environments where data collection is done only occasionally. Typical examples include habitat monitoring systems, monitoring systems...... in chemical plants, etc. Given resource constrained operation of a sensor network where the nodes are battery powered and buffer sizes are limited, efficient methods for in-network data storage abd it subsequent fast and reliable transmission to a gateway is desirable. To save scarse resources and to prolong...... the lifetime of the whole network, the lossy data grregation method can be applied. It is especially viable in the networks where several sensors are measuring the same physical phenomenum and only average values of sensor readings are of interest. In this paper we present a method for efficient lossy data...

  19. Study of Stand-Alone Microgrid under Condition of Faults on Distribution Line

    Science.gov (United States)

    Malla, S. G.; Bhende, C. N.

    2014-10-01

    The behavior of stand-alone microgrid is analyzed under the condition of faults on distribution feeders. During fault since battery is not able to maintain dc-link voltage within limit, the resistive dump load control is presented to do so. An inverter control is proposed to maintain balanced voltages at PCC under the unbalanced load condition and to reduce voltage unbalance factor (VUF) at load points. The proposed inverter control also has facility to protect itself from high fault current. Existing maximum power point tracker (MPPT) algorithm is modified to limit the speed of generator during fault. Extensive simulation results using MATLAB/SIMULINK established that the performance of the controllers is quite satisfactory under different fault conditions as well as unbalanced load conditions.

  20. Solar pv fed stand-alone excitation system of a synchronous machine for reactive power generation

    Science.gov (United States)

    Sudhakar, N.; Jain, Siddhartha; Jyotheeswara Reddy, K.

    2017-11-01

    This paper presents a model of a stand-alone solar energy conversion system based on synchronous machine working as a synchronous condenser in overexcited state. The proposed model consists of a Synchronous Condenser, a DC/DC boost converter whose output is fed to the field of the SC. The boost converter is supplied by the modelled solar panel and a day time variable irradiance is fed to the panel during the simulation time. The model also has one alternate source of rechargeable batteries for the time when irradiance falls below a threshold value. Also the excess power produced when there is ample irradiance is divided in two parts and one is fed to the boost converter while other is utilized to recharge the batteries. A simulation is done in MATLAB-SIMULINK and the obtained results show the utility of such modelling for supplying reactive power is feasible.

  1. An Analysis of Stand-alone GPS Quality and Simulated GNSS Quality for Road Pricing

    DEFF Research Database (Denmark)

    Zabic, Martina; Nielsen, Otto Anker

    2006-01-01

    Use of GPS for road pricing has often been suggested as the way of creating more efficient charging strategies than existing systems based on cordon lines or time use. In Denmark, Copenhagen participated with the AKTA project in the PRoGRESS programme, sponsored by the EU. The major part...... of the AKTA project was to equip 500 cars with GPS receivers. The paper presents the methods and results from a study of GPS quality in relation to road pricing in a dense urban area. The collected data from 500 cars over a two-year period in the Copenhagen region was analyzed in order to determine whether...... the stand alone GPS quality and reliability is adequate for implementation of an operational road pricing system in Copenhagen. The results from the analysis show that the satellite availability in Copenhagen is not sufficient to form the basis for a reliable operational road pricing system. The narrow...

  2. Electrical integration of renewable energy into stand-alone power supplies incorporating hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Little, Matthew; Thomson, Murray

    2007-07-15

    A stand-alone renewable-energy system employing a hydrogen-based energy store is now being commissioned within the HaRI project at West Beacon Farm, Leicestershire, UK. The interconnection of the various generators, loads and storage system is made through a central DC busbar: an arrangement that is believed to be unique within systems of this type and scale. The rotating generators, such as the wind turbines, are connected through standard industrial drives operating in regenerative mode, while the DC devices - electrolyser, fuel cell and solar photovoltaic array - employ custom DC-DC converters. This paper reviews the design philosophy of the electrical system and the various converters required. Modelling and simulation of the system is discussed along with practical lessons learnt from its implementation and some initial results are presented. (author)

  3. System Simulation by Recursive Feedback: Coupling a Set of Stand-Alone Subsystem Simulations

    Science.gov (United States)

    Nixon, D. D.

    2001-01-01

    Conventional construction of digital dynamic system simulations often involves collecting differential equations that model each subsystem, arran g them to a standard form, and obtaining their numerical gin solution as a single coupled, total-system simultaneous set. Simulation by numerical coupling of independent stand-alone subsimulations is a fundamentally different approach that is attractive because, among other things, the architecture naturally facilitates high fidelity, broad scope, and discipline independence. Recursive feedback is defined and discussed as a candidate approach to multidiscipline dynamic system simulation by numerical coupling of self-contained, single-discipline subsystem simulations. A satellite motion example containing three subsystems (orbit dynamics, attitude dynamics, and aerodynamics) has been defined and constructed using this approach. Conventional solution methods are used in the subsystem simulations. Distributed and centralized implementations of coupling have been considered. Numerical results are evaluated by direct comparison with a standard total-system, simultaneous-solution approach.

  4. Stand-alone version of the 11kW Gaia wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, H.; Rosas, P.A.C.; Teodorescu, R.; Blaabjerg, F.

    2004-09-15

    This report describes the development of a stand-alone version of the 11kW Gaia wind turbine. Various possible configurations are investigated and a configuration using a back-to-back converter is chosen. A model is developed for controller design of the fast controllers of the unit. Controllers are designed and a prototype is built for testing. The report documents the performance of the prototype through measurements done on the full scale prototype installed in a test facility where it has been tested both as a standalone unit and in parallel with a diesel genset. For system wide power quality assessment and controller design a dynamic performance assessment model has been developed. (au)

  5. Energy management system for stand-alone diesel-wind-biomass microgrid with energy storage system

    International Nuclear Information System (INIS)

    Wang, Chengshan; Liu, Yixin; Li, Xialin; Guo, Li; Qiao, Lei; Lu, Hai

    2016-01-01

    An energy management system for stand-alone microgrid composed of diesel generators, wind turbine generator, biomass generator and an ESS (energy storage system) is proposed in this paper. Different operation objectives are achieved by a hierarchical control structure with different time scales. Firstly, the optimal schedules of the diesel generators, wind turbine generator, biomass generator and ESS are determined fifteen minutes ahead according to the super short-term forecast of load and wind speed in the optimal scheduling layer. Comprehensive analysis which takes the uncertainty of load and wind speed into account is conducted in this layer to minimize the operation cost of the system and ensure a desirable range of the state of charge of the ESS. Secondly, the operation points of each unit are regulated dynamically to guarantee real-time power balance and safety range of diesel generation in the real-time control layer, based on which the response capability when suffering significant forecast deviation and other emergency issues, e.g. sudden load-up can be improved. Finally, the effectiveness of the proposed energy management strategy is verified on an RT_Lab based real-time simulation platform, and the economic performances with different types of ESS are analyzed as well. - Highlights: • A hierarchical control strategy is proposed for a stand-alone microgrid. • The uncertainties of load and wind speed have been considered. • Better economic performance and high reliability of the system can be achieved. • The influences of different energy storage systems have been analyzed.

  6. Optimal expansion planning of stand-alone systems with stochastic simulations

    Energy Technology Data Exchange (ETDEWEB)

    Hoese, Alejandro [Instituto de Energia Electrica (IEE), Universidad Nacional de San Juan, (Argentina)

    1997-12-31

    Stand-alone systems in the range of 1 kW - 10 MW are taking relevance in the new (global) liberal concept of energy market. State and private investors are becoming increasingly attention on the use of renewable for these systems, but it must be shown that these non-conventional solutions are competitive with the established conventional ones. The high investment costs and the technical and economic uncertainties coupled with the use of time-dependent energy sources are the mainly inhibiting factors for the decision agents to choose these systems instead of conventional ones. In the paper a new model for optimal expansion planning of hybrid stand-alone generating systems under consideration of uncertainties is presented. This model is at present in {sup d}evelopment state{sup .} Results already obtained in the first steps of this research are promising and some of them are here presented. [Espanol] Los sistemas autocontenidos en el rango de 1 Kw a 10 MW estan tomando importancia en el nuevo (global) concepto liberal del mercado de la energia. Inversionistas privados y del Estado estan poniendo mayor atencion en el uso de energias renovables para estos sistemas, pero debe mostrarse que estas soluciones no-convencionales son competitivas con las convencionales establecidas. Los altos costos de inversion y las incertidumbres tecnicas y economicas aunadamente con el uso de fuentes de energia dependientes del tiempo son los principales factores inhibidores de los factores de decision para escoger estos sistemas en lugar de los convencionales. En este articulo se presenta un nuevo modelo de planeacion de expansion optima de sistemas hibridos autocontenidos de generacion electrica bajo la consideracion de incertidumbres. Este modelo esta actualmente en {sup e}stado de desarrollo{sup .} Los resultados ya obtenidos en las primeras etapas de esta investigacion son prometedores y se presentan algunos de ellos.

  7. Diagnostic value of the stand-alone synthetic image in digital breast tomosynthesis examinations.

    Science.gov (United States)

    Garayoa, Julia; Chevalier, Margarita; Castillo, Maria; Mahillo-Fernández, Ignacio; Amallal El Ouahabi, Najim; Estrada, Carmen; Tejerina, Alejandro; Benitez, Olivia; Valverde, Julio

    2018-02-01

    To demonstrate the non-inferiority of synthetic image (SI) mammography versus full-field digital mammography (FFDM) in breast tomosynthesis (DBT) examinations. An observational, retrospective, single-centre, multireader blinded study was performed, using 2384 images to directly compare SI and FFDM based on Breast Imaging Reporting and Data System (BIRADS) categorisation and visibility of radiological findings. Readers had no access to digital breast tomosynthesis slices. Multiple reader, multiple case (MRMC) receiver operating characteristic (ROC) methodology was used to compare the diagnostic performance of SI and FFDM images. The kappa statistic was used to estimate the inter-reader and intra-reader reliability. The area under the ROC curves (AUC) reveals the non-inferiority of SI versus FFDM based on BIRADS categorisation [difference between AUC (ΔAUC), -0.014] and lesion visibility (ΔAUC, -0.001) but the differences were not statistically significant (p=0.282 for BIRADS; p=0.961 for lesion visibility). On average, 77.4% of malignant lesions were detected with SI versus 76.5% with FFDM. Sensitivity and specificity of SI are superior to FFDM for malignant lesions scored as BIRADS 5 and breasts categorised as BIRADS 1. SI is not inferior to FFDM when DBT slices are not available during image reading. SI can replace FFDM, reducing the dose by 45%. • Stand-alone SI demonstrated performance not inferior for lesion visibility as compared to FFDM. • Stand-alone SI demonstrated performance not inferior for lesion BIRADS categorisation as compared to FFDM. • Synthetic images provide important dose savings in breast tomosynthesis examinations.

  8. Imagery rescripting as a stand-alone treatment for patients with social phobia: a case series.

    Science.gov (United States)

    Frets, Petra G; Kevenaar, Ciska; van der Heiden, Colin

    2014-03-01

    The majority of patients with social phobia reports experiencing negative images, usually linked to memories of earlier aversive social experiences. Several studies have indicated that such negative self-imagery appears to have a causal role in maintaining social phobia, which suggests that interventions aimed at dealing with these images could be beneficial in the treatment of social phobia. One potentially powerful approach is imagery rescripting (IR), a clinical intervention that focuses on changing the meaning and impact of unpleasant memories. In the treatment of social phobia IR was only used as part of a broader cognitive-behavioral treatment package. However, we propose that IR alone might also be an effective treatment for this anxiety disorder. The present study reports an initial evaluation of the application of IR as a stand-alone treatment for six adult outpatients presenting with social phobia. A single case series using an A-B replication across patients design was employed. Following a no-treatment baseline period, IR was delivered weekly and patients were followed up for 3 and 6 months. For all patients, substantial reductions were obtained on all outcome measures at post-treatment, and gains were largely maintained at 6-months follow-up. The generalizability of the effects of IR for social phobia is limited by the small number of patients treated by only one therapist. The results of this preliminary case series suggest that IR as a stand alone treatment is an apparently effective intervention in the treatment of patients with social phobia, and indicate that controlled evaluation of its efficacy might be worthwhile. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. A Meta-Analytic Review of Stand-Alone Interventions to Improve Body Image.

    Directory of Open Access Journals (Sweden)

    Jessica M Alleva

    Full Text Available Numerous stand-alone interventions to improve body image have been developed. The present review used meta-analysis to estimate the effectiveness of such interventions, and to identify the specific change techniques that lead to improvement in body image.The inclusion criteria were that (a the intervention was stand-alone (i.e., solely focused on improving body image, (b a control group was used, (c participants were randomly assigned to conditions, and (d at least one pretest and one posttest measure of body image was taken. Effect sizes were meta-analysed and moderator analyses were conducted. A taxonomy of 48 change techniques used in interventions targeted at body image was developed; all interventions were coded using this taxonomy.The literature search identified 62 tests of interventions (N = 3,846. Interventions produced a small-to-medium improvement in body image (d+ = 0.38, a small-to-medium reduction in beauty ideal internalisation (d+ = -0.37, and a large reduction in social comparison tendencies (d+ = -0.72. However, the effect size for body image was inflated by bias both within and across studies, and was reliable but of small magnitude once corrections for bias were applied. Effect sizes for the other outcomes were no longer reliable once corrections for bias were applied. Several features of the sample, intervention, and methodology moderated intervention effects. Twelve change techniques were associated with improvements in body image, and three techniques were contra-indicated.The findings show that interventions engender only small improvements in body image, and underline the need for large-scale, high-quality trials in this area. The review identifies effective techniques that could be deployed in future interventions.

  10. Desktop-Virtualisierung

    Science.gov (United States)

    von Liebisch, Daniel

    Thema dieses Artikels sind die Desktop-Virtualisierung, die Vorteile für das Management von Desktops und Citrix XenDesktop als komplette Lösung für die Desktop-Virtualisierung. Folgende Aspekte werden betrachtet: Die Herausforderungen des Desktop-Managements in Umgebungen ohne Desktop-Virtualisierung

  11. Key factors for the implementation of successful, stand-alone village electrification schemes in Peru

    Science.gov (United States)

    Sanchez-Campos, Teodoro

    The hypothesis of this work is that there are social, financial, technical, managerial institutional and political key factors that may either support or prevent the success of small stand alone energy systems in rural areas. This research work aims at contributing to the identification of such factors and study their relevance to the performance and sustainability of stand alone energy systems in rural areas; to meet its purpose, a wide range of literature was reviewed including rural electrification programmes and projects, research and development projects on access to electricity in rural areas, impact studies and others, and a field research survey was done the Andes and Upper Jungle regions in Peru. Nineteen possible critical factors were identified, thirteen with relevance at the local context (the community or village), and six with relevance at the national (or wider) context. From literature review it was found that the possible local critical factors were relevant only to four categories of factors instead of the six considered initially (i.e. social, financial, technological and managerial): the other two categories, political and institutional were found to be more relevant to the national context, therefore those were included in the group of possible critical factors of wider context. A series of questionnaires were designed to collect field data information, which was later used to analyse and establish the relation of each identified factor with the success of the systems studied. The survey research was implemented in 14 villages, 7 with small diesel sets and 7 with small hydropower schemes, all spread in the Andes and Upper Jungle of Peru, which were carefully selected to be representative of regions with isolated stand alone systems and with different socioeconomic background. Out of the 13 possible critical factors of local context, it was found that only 3 are really critical, the others are important but not critical; one of them (technical

  12. Five-year durability of stand-alone interspinous process decompression for lumbar spinal stenosis

    Directory of Open Access Journals (Sweden)

    Nunley PD

    2017-09-01

    Full Text Available Pierce D Nunley,1 Vikas V Patel,2 Douglas G Orndorff,3 William F Lavelle,4 Jon E Block,5 Fred H Geisler6 1Spine Institute of Louisiana, Shreveport, LA, 2The Spine Center, University of Colorado Hospital, Denver, CO, 3Spine Colorado, Mercy Regional Hospital, Durango, CO, 4Upstate Bone and Joint Center, East Syracuse, NY, 5Independent Consultant, San Francisco, CA, 6Independent Consultant, Chicago, IL, USA Background: Lumbar spinal stenosis is the most common indication for spine surgery in older adults. Interspinous process decompression (IPD using a stand-alone spacer that functions as an extension blocker offers a minimally invasive treatment option for intermittent neurogenic claudication associated with spinal stenosis.Methods: This study evaluated the 5-year clinical outcomes for IPD (Superion® from a randomized controlled US Food and Drug Administration (FDA noninferiority trial. Outcomes included Zurich Claudication Questionnaire (ZCQ symptom severity (ss, physical function (pf, and patient satisfaction (ps subdomains, leg and back pain visual analog scale (VAS, and Oswestry Disability Index (ODI.Results: At 5 years, 84% of patients (74 of 88 demonstrated clinical success on at least two of three ZCQ domains. Individual ZCQ domain success rates were 75% (66 of 88, 81% (71 of 88, and 90% (79 of 88 for ZCQss, ZCQpf, and ZCQps, respectively. Leg and back pain success rates were 80% (68 of 85 and 65% (55 of 85, respectively, and the success rate for ODI was 65% (57 of 88. Percentage improvements over baseline were 42%, 39%, 75%, 66%, and 58% for ZCQss, ZCQpf, leg and back pain VAS, and ODI, respectively (all P<0.001. Within-group effect sizes were classified as very large for four of five clinical outcomes (ie, >1.0; all P<0.0001. Seventy-five percent of IPD patients were free from reoperation, revision, or supplemental fixation at their index level at 5 years.Conclusion: After 5 years of follow-up, IPD with a stand-alone spacer provides

  13. Charactrization of a Li-ion battery based stand-alone a-Si photovoltaic system

    Science.gov (United States)

    Hamid Vishkasougheh, Mehdi; Tunaboylu, Bahadir

    2014-11-01

    The number of photovoltaic (PV) system installations is increasing rapidly. As more people learn about this versatile and often cost-effective power option, this trend will accelerate. This document presents a recommended design for a battery based stand-alone photovoltaic system (BSPV). BSPV system has the ability to be applied in different areas, including warning signals, lighting, refrigeration, communication, residential water pumping, remote sensing, and cathodic protection. The presented calculation method gives a proper idea for a system sizing technique. Based on application load, different scenarios are possible for designing a BSPV system. In this study, a battery based stand-alone system was designed. The electricity generation part is three a-Si panels, which are connected in parallel, and for the storage part LFP (lithium iron phosphate) battery was used. The high power LFP battery packs are 40 cells each 8S5P (configured 8 series 5 parallel). Each individual pack weighs 0.5 kg and is 25.6 V. In order to evaluate the efficiency of a-Si panels with respect to the temperature and the solar irradiation, cities of Istanbul, Ankara and Adana in Turkey were selected. Temperature and solar irradiation were gathered from reliable sources and by using translation equations, current and voltage output of panels were calculated. As a result of these calculations, current and energy outputs were computed by considering an average efficient solar irradiation time value per day in Turkey. The calculated power values were inserted to a battery cycler system, and the behavior of high power LFP batteries in a time sequence of 7.2 h was evaluated. The charging and discharging cycles were obtained and their behavior was discussed. According to the results, Istanbul has the lowest number of peak month's energy, it followed by Ankara, and ultimately Adana has the highest number of peak months and energy storage. It was observed during the tests that values up to 4 A was

  14. Multi-objective analytical model for optimal sizing of stand-alone photovoltaic water pumping systems

    International Nuclear Information System (INIS)

    Olcan, Ceyda

    2015-01-01

    Highlights: • An analytical optimal sizing model is proposed for PV water pumping systems. • The objectives are chosen as deficiency of power supply and life-cycle costs. • The crop water requirements are estimated for a citrus tree yard in Antalya. • The optimal tilt angles are calculated for fixed, seasonal and monthly changes. • The sizing results showed the validity of the proposed analytical model. - Abstract: Stand-alone photovoltaic (PV) water pumping systems effectively use solar energy for irrigation purposes in remote areas. However the random variability and unpredictability of solar energy makes difficult the penetration of PV implementations and complicate the system design. An optimal sizing of these systems proves to be essential. This paper recommends a techno-economic optimization model to determine optimally the capacity of the components of PV water pumping system using a water storage tank. The proposed model is developed regarding the reliability and cost indicators, which are the deficiency of power supply probability and life-cycle costs, respectively. The novelty is that the proposed optimization model is analytically defined for two-objectives and it is able to find a compromise solution. The sizing of a stand-alone PV water pumping system comprises a detailed analysis of crop water requirements and optimal tilt angles. Besides the necessity of long solar radiation and temperature time series, the accurate forecasts of water supply needs have to be determined. The calculation of the optimal tilt angle for yearly, seasonally and monthly frequencies results in higher system efficiency. It is, therefore, suggested to change regularly the tilt angle in order to maximize solar energy output. The proposed optimal sizing model incorporates all these improvements and can accomplish a comprehensive optimization of PV water pumping systems. A case study is conducted considering the irrigation of citrus trees yard located in Antalya, Turkey

  15. Radiographic and clinical evaluation of cage subsidence after stand-alone lateral interbody fusion.

    Science.gov (United States)

    Marchi, Luis; Abdala, Nitamar; Oliveira, Leonardo; Amaral, Rodrigo; Coutinho, Etevaldo; Pimenta, Luiz

    2013-07-01

    Indirect decompression of the neural structures through interbody distraction and fusion in the lumbar spine is feasible, but cage subsidence may limit maintenance of the initial decompression. The influence of interbody cage size on subsidence and symptoms in minimally invasive lateral interbody fusion is heretofore unreported. The authors report the rate of cage subsidence after lateral interbody fusion, examine the clinical effects, and present a subsidence classification scale. The study was performed as an institutional review board-approved prospective, nonrandomized, comparative, single-center radiographic and clinical evaluation. Stand-alone short-segment (1- or 2-level) lateral lumbar interbody fusion was investigated with 12 months of postoperative follow-up. Two groups were compared. Forty-six patients underwent treatment at 61 lumbar levels with standard interbody cages (18 mm anterior/posterior dimension), and 28 patients underwent treatment at 37 lumbar levels with wide cages (22 mm). Standing lateral radiographs were used to measure segmental lumbar lordosis, disc height, and rate of subsidence. Subsidence was classified using the following scale: Grade 0, 0%-24% loss of postoperative disc height; Grade I, 25%-49%; Grade II, 50%-74%; and Grade III, 75%-100%. Fusion status was assessed on CT scanning, and pain and disability were assessed using the visual analog scale and Oswestry Disability Index. Complications and reoperations were recorded. Pain and disability improved similarly in both groups. While significant gains in segmental lumbar lordosis and disc height were observed overall, the standard group experienced less improvement due to the higher rate of interbody graft subsidence. A difference in the rate of subsidence between the groups was evident at 6 weeks (p = 0.027), 3 months (p = 0.042), and 12 months (p = 0.047). At 12 months, 70% in the standard group and 89% in the wide group had Grade 0 or I subsidence, and 30% in the standard group

  16. Flexible Control of Small Wind Turbines With Grid Failure Detection Operating in Stand-Alone and Grid-Connected Mode

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Blaabjerg, Frede

    2004-01-01

    This paper presents the development and test of a flexible control strategy for an 11-kw wind turbine with a back-to-back power converter capable of working in both stand-alone and grid-connected mode. The stand-alone control is featured with a complex output voltage controller capable of handling...... nonlinear load and excess or deficit of generated power. Grid-connection mode with current control is also enabled for the case of isolated local grid involving other dispersed power generators such as other wind turbines or diesel generators. A novel automatic mode switch method based on a phase...

  17. Design of a reliable and low-cost stand-alone micro hydropower station

    Energy Technology Data Exchange (ETDEWEB)

    Kusakana, K.; Munda, J.L. [Tshwane Univ. of Technology, Pretoria (South Africa)

    2008-07-01

    A stand-alone micro-hydropower station was presented. The plant was comprised of a squirrel cage induction machine coupled to a Kaplan water turbine. Power converters were used to control the variable frequency and voltage outputs of the generator caused by variations in water flow. The hydropower plant was installed a farm in the Kwazulu-Natal region of South Africa, and was designed to provide electricity in relation to the low power demand of users in the region as well as according to the site's hydrology and topology. Load forecasts for the 8 houses using the system were conducted. A generator with a higher output than the average power needed to feed the load was selected in order to ensure load supply during peak demand. The system was designed to shore energy generated during off-peak periods in batteries. An AC-DC-AC converter was used as an interface between the generator and the load in order to ensure voltage and frequency stabilization. Simulations of plant components were conducted to demonstrate output power supply during water flow variations. Results of the modelling study indicated that power converters are needed to stabilize generator outputs. The hydropower design is a cost-effective means of supplying power to low-income households. 10 refs., 2 tabs., 7 figs.

  18. Solar photovoltaic applications seminar: design, installation and operation of small, stand-alone photovoltaic power systems

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    This seminar material was developed primarily to provide solar photovoltaic (PV) applied engineering technology to the Federal community. An introduction to photoconductivity, semiconductors, and solar photovoltaic cells is included along with a demonstration of specific applications and application identification. The seminar details general systems design and incorporates most known information from industry, academia, and Government concerning small solar cell power system design engineering, presented in a practical and applied manner. Solar PV power system applications involve classical direct electrical energy conversion and electric power system analysis and synthesis. Presentations and examples involve a variety of disciplines including structural analysis, electric power and load analysis, reliability, sizing and optimization; and, installation, operation and maintenance. Four specific system designs are demonstrated: water pumping, domestic uses, navigational and aircraft aids, and telecommunications. All of the applications discussed are for small power requirement (under 2 kilowatts), stand-alone systems to be used in remote locations. Also presented are practical lessons gained from currently installed and operating systems, problems at sites and their resolution, a logical progression through each major phase of system acquisition, as well as thorough design reviews for each application.

  19. Stand-alone excitation synchronous wind power generators with power flow management strategy

    Directory of Open Access Journals (Sweden)

    Tzuen-Lih Chern

    2014-09-01

    Full Text Available This study presents a stand-alone excitation synchronous wind power generator (SESWPG with power flow management strategy (PFMS. The rotor speed of the excitation synchronous generator tracks the utility grid frequency by using servo motor tracking technologies. The automatic voltage regulator governs the exciting current of generator to achieve the control goals of stable voltage. When wind power is less than the needs of the consumptive loading, the proposed PFMS increases motor torque to provide a positive power output for the loads, while keeping the generator speed constant. Conversely, during the periods of wind power greater than output loads, the redundant power of generator production is charged to the battery pack and the motor speed remains constant with very low power consumption. The advantage of the proposed SESWPG is that the generator can directly output stable alternating current (AC electricity without using additional DC–AC converters. The operation principles with software simulation for the system are described in detail. Experimental results of a laboratory prototype are shown to verify the feasibility of the system.

  20. Simulation of stand alone PV system; Dokuritsugata taiyoko hatsuden system no simulation

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, H.; Ogawa, H.; Sekii, Y. [Chiba Institute of Technology, Chiba (Japan); Tsuda, I.; Nozaki, K. [Electrotechnical Laboratory, Tsukuba (Japan); Kurokawa, K. [Tokyo University of Agriculture and Technology, Tokyo (Japan)

    1996-10-27

    In order to evaluate the simulation results of a photovoltaic power generation system, an operation simulation was carried out using the actual measured data of a stand alone PV system in Miyakojima, Okinawa Prefecture, so as to make a comparison with the actual operation data. The electric power was supplied to 250 houses and primary/junior high schools in the surrounding villages, which had an average demand load of approximately 90kw and the maximum of approximately 200kw. The power was supplied through the PV power generation in the duration of the sunshine, with an excess power charged in storage batteries and then supplied from the batteries at night. The array capacity was made 750kWp, the output current and storage batteries being characteristic type with an actual efficiency curve used for the inverter. The weather data used were the actual inclined insolation quantity and the outside air temperature data for a period of one month of November. The power charged in excess of 100% in the batteries was termed as an overflow power. With the charging condition 30% or less, a diesel generator was run for a rated operation for one hour, the power of which was termed as a backup power. As a result, the simulation was found nearly in agreement with the actual measurements. 5 refs., 7 figs., 2 tabs.

  1. Control of a Stand-Alone Variable Speed Wind Energy Supply System †

    Directory of Open Access Journals (Sweden)

    Mohamed M. Hamada

    2013-04-01

    Full Text Available This paper presents a simple control strategy for the operation of a variable speed stand-alone wind turbine with a permanent magnet synchronous generator (PMSG. The PMSG is connected to a three phase resistive load through a switch mode rectifier and a voltage source inverter. Control of the generator side converter is used to achieve maximum power extraction from the available wind power. Control of the DC-DC bidirectional buck-boost converter, which is connected between batteries bank and DC-link voltage, is used to maintain the DC-link voltage at a constant value. It is also used to make the batteries bank stores the surplus of wind energy and supplies this energy to the load during a wind power shortage. The load side voltage source inverter uses a relatively complex vector control scheme to control the output load voltage in terms of amplitude and frequency. The control strategy works under wind speed variation as well as with variable load. Extensive simulation results have been performed using MATLAB/SIMULINK.

  2. Can aqueous hydrogen peroxide be used as a stand-alone energy source?

    International Nuclear Information System (INIS)

    Disselkamp, Robert S.

    2010-01-01

    A novel electrochemical scheme to convert a stand-alone supply of aqueous hydrogen peroxide into a fuel cell-ready stream of hydrogen gas plus aqueous hydrogen peroxide is described. The electrochemical cell, consisting of a solid base and solid acid electrocatalyst, together with a proton exchange membrane, comprise the system that converts aqueous hydrogen peroxide into separate gas streams of oxygen and hydrogen. Aqueous hydrogen peroxide is contained in the anode compartment only and exists in the region where oxygen gas is formed, whereas the cathode compartment is where hydrogen gas is generated and therefore exists in a reduced state. A near zero theoretical over-potential can be achieved by the choice of basicity and acidity of the electrode materials. The primary cost of the electrochemical cell is electrode construction and the aqueous hydrogen peroxide energy storage compound. Additional research effort is required to experimentally validate the concept and explore the full economic impact should initial studies, based on the design presented here, prove promising. (author)

  3. Comparative analysis of distributed MPPT controllers for partially shaded stand alone photovoltaic systems

    International Nuclear Information System (INIS)

    Muthuramalingam, M.; Manoharan, P.S.

    2014-01-01

    Highlights: • Analyzes the performance of ANN and ANFIS MPPT algorithms by stand alone PV system. • ISSBC with ANFIS can provide the overall efficiency higher than ANN. • CHBMLI integrate with SHE ANN modulation technique improve output voltage quality. • Simulation and hardware results show the ANFIS algorithm efficient than ANN algorithm. - Abstract: This paper presents a unique combination of an interleaved soft switched boost converter (ISSBC) run by a set of two photovoltaic panel (PV) with a distributed MPPT, suitable to guarantee MPPT even under partial shadowed conditions, managed by an adaptive neuro fuzzy inference system trained by the training data derived from a particle swarm optimization (PSO–ANFIS) unit. The ISSBC is followed by a, single phase cascaded H bridge five-level inverter (CHI) driven by the individual DC outputs of the ISSBC, with selective harmonic elimination scheme to eliminate typically the seventh order harmonics. A comparison of different intelligent distributed maximum power point tracking (MPPT) algorithms for photovoltaic (PV) system under partial shadow conditions is carried out. The use of the ISSBC guarantees mitigation of ripple and it is meant to handle higher currents with minimal switching losses. Simulation was carried out in the Matlab Simulink environment and an experimental verification with a scaled down model validated the proposed scheme. It has been thus established, by both simulation and experimental verification, that the PSO–ANFIS model of distributed MPPT scheme of control outperforms other schemes of control for MPPT

  4. Battery Storage Technologies for Electrical Applications: Impact in Stand-Alone Photovoltaic Systems

    Directory of Open Access Journals (Sweden)

    Daniel Akinyele

    2017-11-01

    Full Text Available Batteries are promising storage technologies for stationary applications because of their maturity, and the ease with which they are designed and installed compared to other technologies. However, they pose threats to the environment and human health. Several studies have discussed the various battery technologies and applications, but evaluating the environmental impact of batteries in electrical systems remains a gap that requires concerted research efforts. This study first presents an overview of batteries and compares their technical properties such as the cycle life, power and energy densities, efficiencies and the costs. It proposes an optimal battery technology sizing and selection strategy, and then assesses the environmental impact of batteries in a typical renewable energy application by using a stand-alone photovoltaic (PV system as a case study. The greenhouse gas (GHG impact of the batteries is evaluated based on the life cycle emission rate parameter. Results reveal that the battery has a significant impact in the energy system, with a GHG impact of about 36–68% in a 1.5 kW PV system for different locations. The paper discusses new batteries, strategies to minimize battery impact and provides insights into the selection of batteries with improved cycling capacity, higher lifespan and lower cost that can achieve lower environmental impacts for future applications.

  5. Approaches for developing a sizing method for stand-alone PV systems with variable demand

    Energy Technology Data Exchange (ETDEWEB)

    Posadillo, R. [Grupo de Investigacion en Energias y Recursos Renovables, Dpto. de Fisica Aplicada, E.P.S., Universidad de Cordoba, Avda. Menendez Pidal s/n, 14004 Cordoba (Spain); Lopez Luque, R. [Grupo de Investigacion de Fisica para las Energias y Recursos Renovables, Dpto. de Fisica Aplicada. Edificio C2 Campus de Rabanales, 14071 Cordoba (Spain)

    2008-05-15

    Accurate sizing is one of the most important aspects to take into consideration when designing a stand-alone photovoltaic system (SAPV). Various methods, which differ in terms of their simplicity or reliability, have been developed for this purpose. Analytical methods, which seek functional relationships between variables of interest to the sizing problem, are one of these approaches. A series of rational considerations are presented in this paper with the aim of shedding light upon the basic principles and results of various sizing methods proposed by different authors. These considerations set the basis for a new analytical method that has been designed for systems with variable monthly energy demands. Following previous approaches, the method proposed is based on the concept of loss of load probability (LLP) - a parameter that is used to characterize system design. The method includes information on the standard deviation of loss of load probability ({sigma}{sub LLP}) and on two new parameters: annual number of system failures (f) and standard deviation of annual number of failures ({sigma}{sub f}). The method proves useful for sizing a PV system in a reliable manner and serves to explain the discrepancies found in the research on systems with LLP<10{sup -2}. We demonstrate that reliability depends not only on the sizing variables and on the distribution function of solar radiation, but on the minimum value as well, which in a given location and with a monthly average clearness index, achieves total solar radiation on the receiver surface. (author)

  6. On the economics of stand-alone renewable hybrid power plants in remote regions

    International Nuclear Information System (INIS)

    Petrakopoulou, Fontina

    2016-01-01

    Highlights: • Economic evaluation of three renewable hybrid power plants for off-grid operation. • The high electricity cost of remote regions increases the competitiveness of renewable energy. • The proposed plants are economically viable when compared to the existing situation. • The zero direct emissions of the plants constitute an additional advantage of the plants. - Abstract: In recent years ever more examples of regions that have managed to achieve or orientate themselves toward renewable energy sufficiency are emerging. However, actions to create energy autonomy are mainly the result of isolated activities and they are less driven from fully organized movements. In addition, total energy independence without the support of a centralized electrical grid is yet to be achieved. The objectives of this work are to investigate the associated costs of stand-alone renewable hybrid power plants on a Greek island and compare them to the cost of the currently used fossil-fuel-based conventional plant. The plants examined here are designed to fully cover the electricity needs of the island. Islands may face numerous energy problems and rely heavily on foreign and environmentally-harmful fuels. It is shown that the relatively high cost of electricity of such a remote region can increase the competitiveness and promote the wider incorporation of technologies based on renewable energy sources that may, in other cases, seem economically inferior to business-as-usual energy solutions.

  7. Use of Super-Capacitor to Enhance Charging Performance of Stand-Alone Solar PV System

    KAUST Repository

    Huang, B. J.

    2011-01-01

    Introduction: The battery charging performance in a stand-alone solar PV system affects the PV system efficiency and the load operating time. The New Energy Center of National Taiwan University has been devoted to the development of a PWM charging technique to continue charging the lead-acid battery after the overcharge point to increase the battery storage capacity by more than 10%. The present study intends to use the super-capacitor to further increase the charge capacity before the overcharge point of the battery. The super-capacitor is connected in parallel to the lead-acid battery. This will reduce the overall charging impedance during the charge and increase the charging current, especially in sunny weather. A system dynamics model of the lead-acid battery and super-capacitor was derived and the control system simulation was carried out to predict the charging performance for various weathers. It shows that the overall battery impedance decreases and charging power increases with increasing solar radiation. An outdoor comparative test for two identical PV systems with and without supercapacitor was carried out. The use of super-capacitor is shown to be able to increase the lead-acid charging capacity by more than 25% at sunny weather and 10% in cloudy weather. © Springer-Verlag Berlin Heidelberg 2011.

  8. Motion Sensorless Bidirectional PWM Converter Control with Seamless Switching from Power Grid to Stand Alone and Back

    DEFF Research Database (Denmark)

    Fatu, Marius; Tutelea, Lucian; Teodorescu, Remus

    2007-01-01

    This paper presents concepts and tests results on a flexible sensorless control strategy for a PMSG driven by a small wind turbine with back-to-back power converters capable to function in both stand alone and grid connection mode. A new automatic seamless transfer method, based on phase-locked...

  9. Analyzing grid extension and stand-alone photovoltaic systems for the cost-effective electrification of Kenya

    NARCIS (Netherlands)

    Zeyringer, Marianne; Pachauri, Shonali; Schmid, Erwin; Schmidt, Johannes; Worrell, Ernst; Morawetz, Ulrich B.

    2015-01-01

    The declaration of 2014-2024 as the Decade of Sustainable Energy for All has catalyzed actions towards achieving universal electricity access. The high costs of building electric infrastructure are a major impediment to improved access, making stand-alone photovoltaic (PV) systems an attractive

  10. Stand-Alone Ethics, Social Responsibility, and Sustainability Course Requirements: A Snapshot from Australia and New Zealand

    Science.gov (United States)

    Rundle-Thiele, Sharyn R.; Wymer, Walter

    2010-01-01

    This article analyzes the extent to which Australian and New Zealand marketing educators use dedicated or stand-alone courses to equip students with alternative views of business. A census of marketing programs in degree-granting universities was conducted. Program brochures were obtained via the Internet and were content analyzed. This study…

  11. 49 CFR 1109.4 - Mandatory mediation in rate cases to be considered under the stand-alone cost methodology.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Mandatory mediation in rate cases to be considered... § 1109.4 Mandatory mediation in rate cases to be considered under the stand-alone cost methodology. (a) A... methodology must engage in non-binding mediation of its dispute with the railroad upon filing a formal...

  12. An improved synchronous reference frame phase-locked loop for stand-alone variable speed constant frequency power generation systems

    DEFF Research Database (Denmark)

    Liu, Yi; Xu, Wei; Ke, Longzhang

    2017-01-01

    The phase-locked loop (PLL) based on conventional synchronous reference frame, i.e. dqPLL, is usually employed in grid-connected variable speed constant frequency (VSCF) power generation systems (PGSs). However, the voltage amplitude drop of stand-alone PGSs is often greater than that of the grid...

  13. The eBioKit, a stand-alone educational platform for bioinformatics.

    Science.gov (United States)

    Hernández-de-Diego, Rafael; de Villiers, Etienne P; Klingström, Tomas; Gourlé, Hadrien; Conesa, Ana; Bongcam-Rudloff, Erik

    2017-09-01

    Bioinformatics skills have become essential for many research areas; however, the availability of qualified researchers is usually lower than the demand and training to increase the number of able bioinformaticians is an important task for the bioinformatics community. When conducting training or hands-on tutorials, the lack of control over the analysis tools and repositories often results in undesirable situations during training, as unavailable online tools or version conflicts may delay, complicate, or even prevent the successful completion of a training event. The eBioKit is a stand-alone educational platform that hosts numerous tools and databases for bioinformatics research and allows training to take place in a controlled environment. A key advantage of the eBioKit over other existing teaching solutions is that all the required software and databases are locally installed on the system, significantly reducing the dependence on the internet. Furthermore, the architecture of the eBioKit has demonstrated itself to be an excellent balance between portability and performance, not only making the eBioKit an exceptional educational tool but also providing small research groups with a platform to incorporate bioinformatics analysis in their research. As a result, the eBioKit has formed an integral part of training and research performed by a wide variety of universities and organizations such as the Pan African Bioinformatics Network (H3ABioNet) as part of the initiative Human Heredity and Health in Africa (H3Africa), the Southern Africa Network for Biosciences (SAnBio) initiative, the Biosciences eastern and central Africa (BecA) hub, and the International Glossina Genome Initiative.

  14. Hydrogen-based energy storage unit for stand alone PV systems

    International Nuclear Information System (INIS)

    Labbe, J.

    2006-12-01

    Stand alone systems supplied only by a photovoltaic generator need an energy storage unit to be fully self sufficient. Lead acid batteries are commonly used to store energy because of their low cost, despite several operational constraints. A hydrogen-based energy storage unit (HESU) could be another candidate, including an electrolyser, a fuel cell and a hydrogen tank. However many efforts still need to be carried out for this technology to reach an industrial stage. In particular, market outlets must be clearly identified. The study of small stationary applications (few kW) is performed by numerical simulations. A simulator is developed in the Matlab/Simulink environment. It is mainly composed of a photovoltaic field and a storage unit (lead acid batteries, HESU, or hybrid storage HESU/batteries). The system component sizing is achieved in order to ensure the complete system autonomy over a whole year of operation. The simulator is tested with 160 load profiles (1 kW as a yearly mean value) and three locations (Algeria, France and Norway). Two coefficients are set in order to quantify the correlation between the power consumption of the end user and the renewable resource availability at both daily and yearly scales. Among the tested cases, a limit value of the yearly correlation coefficient came out, enabling to recommend the use of the most adapted storage to a considered case. There are cases for which using HESU instead of lead acid batteries can increase the system efficiency, decrease the size of the photovoltaic field and improve the exploitation of the renewable resource. In addition, hybridization of HESU with batteries always leads to system enhancements regarding its sizing and performance, with an efficiency increase by 10 to 40 % depending on the considered location. The good agreement between the simulation data and field data gathered on real systems enabled the validation of the models used in this study. (author)

  15. Stand-alone rolling circle amplification combined with capillary electrophoresis for specific detection of small RNA.

    Science.gov (United States)

    Li, Ni; Jablonowski, Carolyn; Jin, Hailing; Zhong, Wenwan

    2009-06-15

    Noncoding small RNAs play diverse, important biological roles through gene expression regulation. However, their low expression levels make it difficult to identify new small RNA species and study their functions, calling for the development of detection schemes with higher simplicity, sensitivity, and specificity. Herein, we reported a straightforward assay that combined the stand-alone rolling circle amplification (RCA) with capillary electrophoresis (CE) for specific and sensitive detection of small RNAs in biological samples. In order to enhance the overall reaction efficiency and simplify the procedure, RCA was not preceded with ligation, and a preformed circular probe was employed as the template for the target small RNA-primed isothermal amplification. The long RCA product was digested and analyzed by CE. Two DNA polymerases, the Phi29 and Bst, were compared for their detection performance. Bst is superior in the aspects of specificity, procedure simplicity, and reproducibility, while Phi29 leads to a 5-fold lower detection limit and is able to detect as low as 35 amol of the target small RNA. Coamplification of an internal standard with the target and employment of the RNase A digestion step allow accurate and reproducible quantification of low amounts of small RNA targets spiked into hundreds of nanograms of the plant total RNA extract with a recovery below 110% using either enzyme. Our assay can be adapted to a capillary array system for high-throughput screening of small RNA expression in biological samples. Also, the one-step isothermal process has the potential to conveniently amplify a very limited amount of the RNA samples, e.g., RNA extracted from only a few cells, inside the capillary column or on a microchip.

  16. Radiologic Assessment of Subsidence in Stand-Alone Cervical Polyetheretherketone (PEEK) Cage.

    Science.gov (United States)

    Ha, Sung-Kon; Park, Jung-Yul; Kim, Se-Hoon; Lim, Dong-Jun; Kim, Sang-Dae; Lee, Sang-Kook

    2008-12-01

    Aim of study was to find a proper method for assessing subsidence using a radiologic measurement following anterior cervical discectomy and fusion (ACDF) with stand-alone polyetheretherketone (PEEK), Solistrade mark cage. Forty-two patients who underwent ACDF with Solistrade mark cage were selected. With a minimum follow-up of 6 months, the retrospective investigation was conducted for 37 levels in 32 patients. Mean follow-up period was 18.9 months. Total intervertebral height (TIH) of two fused vertebral bodies was measured on digital radiographs with built-in software. Degree of subsidence (DeltaTIH) was reflected by the difference between the immediate postoperative and follow-up TIH. Change of postoperative disc space height (CT-MRDeltaTIH) was reflected by the difference between TIH of the preoperative mid-sagittal 2D CT and that of the preoperative mid-sagittal T1-weighted MRI. Compared to preoperative findings, postoperative disc height was increased in all cases and subsidence was observed only in 3 cases. For comparison of subsidence and non-subsidence group, TIH and CT-MRDeltaTIH of each group were analyzed. There was no statistically significant difference in TIH and CT-MRDeltaTIH between each group at 4 and 8 weeks, but a difference was observed at the last follow-up TIH (p=0.0497). ACDF with Solistrade mark cage was associated with relatively good radiologic long-term results. Fusion was achieved in 94.5% and subsidence occurred in 8.1% by the radiologic assessment. Statistical analysis reveals that the subsidence seen later than 8 weeks after surgery and the development of subsidence does not correlate statistically with the change of the postoperative disc space height.

  17. Stand-Alone Lateral Interbody Fusion for the Treatment of Low-Grade Degenerative Spondylolisthesis

    Directory of Open Access Journals (Sweden)

    Luis Marchi

    2012-01-01

    Full Text Available The purpose of this paper was to investigate the stand-alone lateral interbody fusion as a minimally invasive option for the treatment of low-grade degenerative spondylolisthesis with a minimum 24-month followup. Prospective nonrandomized observational single-center study. 52 consecutive patients (67.6±10 y/o; 73.1% female; 27.4±3.4 BMI with single-level grade I/II single-level degenerative spondylolisthesis without significant spine instability were included. Fusion procedures were performed as retroperitoneal lateral transpsoas interbody fusions without screw supplementation. The procedures were performed in average 73.2 minutes and with less than 50cc blood loss. VAS and Oswestry scores showed lasting improvements in clinical outcomes (60% and 54.5% change, resp.. The vertebral slippage was reduced in 90.4% of cases from mean values of 15.1% preoperatively to 7.4% at 6-week followup (P<0.001 and was maintained through 24 months (7.1%, P<0.001. Segmental lordosis (P<0.001 and disc height (P<0.001 were improved in postop evaluations. Cage subsidence occurred in 9/52 cases (17% and 7/52 cases (13% spine levels needed revision surgery. At the 24-month evaluation, solid fusion was observed in 86.5% of the levels treated. The minimally invasive lateral approach has been shown to be a safe and reproducible technique to treat low-grade degenerative spondylolisthesis.

  18. "Candidatus Fokinia solitaria", a Novel "Stand-Alone" Symbiotic Lineage of Midichloriaceae (Rickettsiales.

    Directory of Open Access Journals (Sweden)

    Franziska Szokoli

    Full Text Available Recently, the family Midichloriaceae has been described within the bacterial order Rickettsiales. It includes a variety of bacterial endosymbionts detected in different metazoan host species belonging to Placozoa, Cnidaria, Arthropoda and Vertebrata. Representatives of Midichloriaceae are also considered possible etiological agents of certain animal diseases. Midichloriaceae have been found also in protists like ciliates and amoebae. The present work describes a new bacterial endosymbiont, "Candidatus Fokinia solitaria", retrieved from three different strains of a novel Paramecium species isolated from a wastewater treatment plant in Rio de Janeiro (Brazil. Symbionts were characterized through the full-cycle rRNA approach: SSU rRNA gene sequencing and fluorescence in situ hybridization (FISH with three species-specific oligonucleotide probes. In electron micrographs, the tiny rod-shaped endosymbionts (1.2 x 0.25-0.35 μm in size were not surrounded by a symbiontophorous vacuole and were located in the peripheral host cytoplasm, stratified in the host cortex in between the trichocysts or just below them. Frequently, they occurred inside autolysosomes. Phylogenetic analyses of Midichloriaceae apparently show different evolutionary pathways within the family. Some genera, such as "Ca. Midichloria" and "Ca. Lariskella", have been retrieved frequently and independently in different hosts and environmental surveys. On the contrary, others, such as Lyticum, "Ca. Anadelfobacter", "Ca. Defluviella" and the presently described "Ca. Fokinia solitaria", have been found only occasionally and associated to specific host species. These last are the only representatives in their own branches thus far. Present data do not allow to infer whether these genera, which we named "stand-alone lineages", are an indication of poorly sampled organisms, thus underrepresented in GenBank, or represent fast evolving, highly adapted evolutionary lineages.

  19. Optimum capacity determination of stand-alone hybrid generation system considering cost and reliability

    International Nuclear Information System (INIS)

    Chen, Hung-Cheng

    2013-01-01

    Highlights: ► This paper presents a methodology for the installation capacity optimization. ► Hybrid generation system is optimized by application of adaptive genetic algorithm. ► A cost investigation is made under various conditions and component characteristics. ► The optimization scheme is validated to meet the annual power load demand. -- Abstract: The aim of this work is to present an optimization methodology for the installation capacity of a stand-alone hybrid generation system, taking into consideration the cost and reliability. Firstly, on the basis of derived steady state models of a wind generator (WG), a photovoltaic array (PV), a battery and an inverter, the hybrid generation system is modeled for the purpose of capacity optimization. Secondly, the power system is analyzed for determining both the system structure and the operation control strategy. Thirdly, according to hourly weather database of wind speed, temperature and solar irradiation, annual power generation capacity is estimated for the system match design in order that an annual power load demand can be met. The capacity determination of a hybrid generation system becomes complicated as a result of the uncertainty in the renewable energy together with load demand and the nonlinearity of system components. Aimed at the power system reliability and the cost minimization, the capacity of a hybrid generation system is optimized by application of an adaptive genetic algorithm (AGA) to individual power generation units. A total cost investigation is made under various conditions, such as wind generator power curves, battery discharge depth and the loss of load probability (LOLP). At the end of this work, the capacity of a hybrid generation system is optimized at two installation sites, namely the offshore Orchid Island and Wuchi in Taiwan. The optimization scheme is validated to optimize power capacities of a photovoltaic array, a battery and a wind turbine generator with a relative

  20. A Low-Power Wearable Stand-Alone Tongue Drive System for People With Severe Disabilities.

    Science.gov (United States)

    Jafari, Ali; Buswell, Nathanael; Ghovanloo, Maysam; Mohsenin, Tinoosh

    2018-02-01

    This paper presents a low-power stand-alone tongue drive system (sTDS) used for individuals with severe disabilities to potentially control their environment such as computer, smartphone, and wheelchair using their voluntary tongue movements. A low-power local processor is proposed, which can perform signal processing to convert raw magnetic sensor signals to user-defined commands, on the sTDS wearable headset, rather than sending all raw data out to a PC or smartphone. The proposed sTDS significantly reduces the transmitter power consumption and subsequently increases the battery life. Assuming the sTDS user issues one command every 20 ms, the proposed local processor reduces the data volume that needs to be wirelessly transmitted by a factor of 64, from 9.6 to 0.15 kb/s. The proposed processor consists of three main blocks: serial peripheral interface bus for receiving raw data from magnetic sensors, external magnetic interference attenuation to attenuate external magnetic field from the raw magnetic signal, and a machine learning classifier for command detection. A proof-of-concept prototype sTDS has been implemented with a low-power IGLOO-nano field programmable gate array (FPGA), bluetooth low energy, battery and magnetic sensors on a headset, and tested. At clock frequency of 20 MHz, the processor takes 6.6 s and consumes 27 nJ for detecting a command with a detection accuracy of 96.9%. To further reduce power consumption, an application-specified integrated circuit processor for the sTDS is implemented at the postlayout level in 65-nm CMOS technology with 1-V power supply, and it consumes 0.43 mW, which is 10 lower than FPGA power consumption and occupies an area of only 0.016 mm.

  1. Stand-Alone Photovoltaic System Assessment in Warmer Urban Areas in Mexico

    Directory of Open Access Journals (Sweden)

    Alberto-Jesus Perea-Moreno

    2018-01-01

    Full Text Available The aim of this study is to examine the possibility of using a stand-alone photovoltaic system (SAPVS for electricity generation in urban areas in Southern Mexico. In Mexico, an urban area is defined as an area where more than 2500 inhabitants live. Due to constant migration from the countryside to the cities, the number of inhabitants of urban localities has been increasing. Global horizontal irradiation (GHI data were recorded every 10 min during 2014–2016 in Coatzacoalcos in the state of Veracruz located on 18°08′09″ N and 94°27′48″ W. In this study, batteries represented 77% of the total cost, 12 PV panels of 310 W could export 5.41 MWh to the grid, and an inverter with an integrated controller and charger was selected, which decreased the initial cost. The city of Coatzacoalcos was chosen because the average annual temperature is 28°, with an average relative humidity of 75% and an average irradiance of 5.3 kWh/m2/day. An emission factor 0.505 tCO2/MWh of greenhouse gases (GHG were obtained, based on the power system, the reduction of net annual GHG would be 11 tCO2 and a financial revenue of 36.951 × 103 $/tCO2 would be obtained. Financial parameters such as a 36.3% Internal Rate Return (IRR and 3.4 years payback show the financial viability of this investment. SAPVSs in urban areas in Mexico could be a benefit as long as housing has a high consumption of electricity.

  2. Brackish water desalination by a stand alone reverse osmosis desalination unit powered by photovoltaic solar energy

    Energy Technology Data Exchange (ETDEWEB)

    Hrayshat, Eyad S. [Tafila Technical University, P.O. Box 66, Tafila 66110 (Jordan)

    2008-08-15

    Desalination of brackish water as a viable option to cope with water scarcity and to overcome water deficit in Jordan is assessed. A stand alone reverse osmosis (RO) desalination unit powered by photovoltaic (PV) solar energy is proposed, and a computer code in C++ was generated in order to simulate the process, and to predict the water production at 10 selected sites based on the available solar radiation data, sunshine hours and salinity of the feed water (TDS of 3000, 5000, 7000, and 10,000 mg/L). It was found that most of the selected sites showed favorable application of the proposed system in Jordan. Tafila, Queira, Ras Muneef, H-4, and H-5 are the most favorable sites. With TDS of 7000 mg/L, the highest annual water production of 1679 m{sup 3}/year was observed in Tafila, followed by Queira with production of 1473 m{sup 3}/year. Ras Muneef, H-4, and H-5 showed close to each other production of 1363, 1345, and 1340 m{sup 3}/year, respectively. Among the most favorable sites (Tafila, Queira, Ras Muneef, H-4, and H-5), Ras Muneef was found to be the best site in terms of the daily amount of water produced during the driest months of the year (May-September). Its production during these months forms about 65% of its total daily water production during a 1-year cycle, while for each of the other most favorable sites namely Tafila, Queira, H-4, and H-5, a 61% of production was observed during the same period. (author)

  3. Stand-Alone Solar Organic Rankine Cycle Water Pumping System and Its Economic Viability in Nepal

    Directory of Open Access Journals (Sweden)

    Suresh Baral

    2015-12-01

    Full Text Available The current study presents the concept of a stand-alone solar organic Rankine cycle (ORC water pumping system for rural Nepalese areas. Experimental results for this technology are presented based on a prototype. The economic viability of the system was assessed based on solar radiation data of different Nepalese geographic locations. The mechanical power produced by the solar ORC is coupled with a water pumping system for various applications, such as drinking and irrigation. The thermal efficiency of the system was found to be 8% with an operating temperature of 120 °C. The hot water produced by the unit has a temperature of 40 °C. Economic assessment was done for 1-kW and 5-kW solar ORC water pumping systems. These systems use different types of solar collectors: a parabolic trough collector (PTC and an evacuated tube collector (ETC. The economic analysis showed that the costs of water are $2.47/m3 (highest and $1.86/m3 (lowest for the 1-kW system and a 150-m pumping head. In addition, the cost of water is reduced when the size of the system is increased and the pumping head is reduced. The minimum volumes of water pumped are 2190 m3 and 11,100 m3 yearly for 1 kW and 5 kW, respectively. The payback period is eight years with a profitability index of 1.6. The system is highly feasible and promising in the context of Nepal.

  4. Feasibility study and energy conversion analysis of stand-alone hybrid renewable energy system

    International Nuclear Information System (INIS)

    Baghdadi, Fazia; Mohammedi, Kamal; Diaf, Said; Behar, Omar

    2015-01-01

    Highlights: • Hybrid stand-alone wind–solar–fossil power system is analyzed. • Measurement data are used to evaluate system performance. • The proposed system can generate about 70% from renewables. • Such a hybrid plant is very promising for remote regions in Algeria. - Abstract: There is a great interest in the development of renewable power technologies in Algeria, and more particularly hybrid concept. The present paper has investigated the performance of hybrid PV–Wind–Diesel–Battery configuration based on hourly measurements of Adrar climate (southern Algeria). Data of global solar radiation, ambient temperature and wind speed for a period of one year have been used. Firstly, the proposed hybrid system has been optimized by means of HOMER software. The optimization process has been carried out taking into account renewable resources potential and energy demand; while maximizing renewable electricity use and fuel saving are the purpose. In the second step, a mathematical model has been developed to ensure efficient energy management on the basis of various operation strategies. The analysis has shown that renewable energy system (PV–Wind) is able to supply about 70% of the demand. Wind power has ranked first with 43% of the annual total electricity production followed by diesel generator (with 31%) while the remaining fraction is being to PV panels. In this context, 69% of the fossil fuel can be saved when using the proposed hybrid configuration instead of the diesel generators that are currently installed in most remote regions in Algeria. Such a concept is very promising to meet the focus of renewable energy program announced in 2011.

  5. Probabilistic modelling and analysis of stand-alone hybrid power systems

    International Nuclear Information System (INIS)

    Lujano-Rojas, Juan M.; Dufo-López, Rodolfo; Bernal-Agustín, José L.

    2013-01-01

    As a part of the Hybrid Intelligent Algorithm, a model based on an ANN (artificial neural network) has been proposed in this paper to represent hybrid system behaviour considering the uncertainty related to wind speed and solar radiation, battery bank lifetime, and fuel prices. The Hybrid Intelligent Algorithm suggests a combination of probabilistic analysis based on a Monte Carlo simulation approach and artificial neural network training embedded in a genetic algorithm optimisation model. The installation of a typical hybrid system was analysed. Probabilistic analysis was used to generate an input–output dataset of 519 samples that was later used to train the ANNs to reduce the computational effort required. The generalisation ability of the ANNs was measured in terms of RMSE (Root Mean Square Error), MBE (Mean Bias Error), MAE (Mean Absolute Error), and R-squared estimators using another data group of 200 samples. The results obtained from the estimation of the expected energy not supplied, the probability of a determined reliability level, and the estimation of expected value of net present cost show that the presented model is able to represent the main characteristics of a typical hybrid power system under uncertain operating conditions. - Highlights: • This paper presents a probabilistic model for stand-alone hybrid power system. • The model considers the main sources of uncertainty related to renewable resources. • The Hybrid Intelligent Algorithm has been applied to represent hybrid system behaviour. • The installation of a typical hybrid system was analysed. • The results obtained from the study case validate the presented model

  6. A stand-alone demography and landscape structure module for Earth system models

    Science.gov (United States)

    Nieradzik, L. P.; Haverd, V.; Smith, B.; Cook, G. D.; Briggs, P.; Roxburgh, S.; Liedloff, A.; Meyer, C.; Canadell, J.

    2013-12-01

    component of any LSM, represents a significant advance in our ability to use in-situ and remotely sensed observations of biomass and individual level parameters (e.g. crown-size, tree-height, stem diameter) as constraints on the terrestrial carbon cycle. Haverd, V., B. Smith, G. Cook, P. Briggs, L. Nieradzik, S. Roxburgh, A. Liedloff, C. Meyer, and J. G. Canadell, A stand-alone tree demography and landscape structure module for Earth system models, submitted to Geophys. Res. Let., 2013 Wolf, A., P. Ciais, V. Bellassen, N. Delbart, C.B. Field, and J.A. Berry, Forest biomass allometry in global land surface models, Global Biogeochem. Cycles, 25, GB3015, doi:10.1029/2010GB003917, 2011

  7. prfectBLAST: a platform-independent portable front end for the command terminal BLAST+ stand-alone suite.

    Science.gov (United States)

    Santiago-Sotelo, Perfecto; Ramirez-Prado, Jorge Humberto

    2012-11-01

    prfectBLAST is a multiplatform graphical user interface (GUI) for the stand-alone BLAST+ suite of applications. It allows researchers to do nucleotide or amino acid sequence similarity searches against public (or user-customized) databases that are locally stored. It does not require any dependencies or installation and can be used from a portable flash drive. prfectBLAST is implemented in Java version 6 (SUN) and runs on all platforms that support Java and for which National Center for Biotechnology Information has made available stand-alone BLAST executables, including MS Windows, Mac OS X, and Linux. It is free and open source software, made available under the GNU General Public License version 3 (GPLv3) and can be downloaded at www.cicy.mx/sitios/jramirez or http://code.google.com/p/prfectblast/.

  8. Flexible Control of Small Wind Turbines With Grid Failure Detection Operating in Stand-Alone and Grid-Connected Mode

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Blaabjerg, Frede

    2004-01-01

    This paper presents the development and test of a flexible control strategy for an 11-kw wind turbine with a back-to-back power converter capable of working in both stand-alone and grid-connected mode. The stand-alone control is featured with a complex output voltage controller capable of handling...... nonlinear load and excess or deficit of generated power. Grid-connection mode with current control is also enabled for the case of isolated local grid involving other dispersed power generators such as other wind turbines or diesel generators. A novel automatic mode switch method based on a phase......-locked loop controller is developed in order to detect the grid failure or recovery and switch the operation mode accordingly. A flexible digital signal processor (DSP) system that allows user-friendly code development and on-line tuning is used to implement and test the different control strategies. The back...

  9. Stand-alone flat-plate photovoltaic power systems: System sizing and life-cycle costing methodology for Federal agencies

    Science.gov (United States)

    Borden, C. S.; Volkmer, K.; Cochrane, E. H.; Lawson, A. C.

    1984-01-01

    A simple methodology to estimate photovoltaic system size and life-cycle costs in stand-alone applications is presented. It is designed to assist engineers at Government agencies in determining the feasibility of using small stand-alone photovoltaic systems to supply ac or dc power to the load. Photovoltaic system design considerations are presented as well as the equations for sizing the flat-plate array and the battery storage to meet the required load. Cost effectiveness of a candidate photovoltaic system is based on comparison with the life-cycle cost of alternative systems. Examples of alternative systems addressed are batteries, diesel generators, the utility grid, and other renewable energy systems.

  10. Optimum autonomous stand-alone photovoltaic system design on the basis of energy pay-back analysis

    International Nuclear Information System (INIS)

    Kaldellis, J.K.; Zafirakis, D.; Kondili, E.

    2009-01-01

    Stand-alone photovoltaic (PV) systems comprise one of the most promising electrification solutions for covering the demand of remote consumers. However, such systems are strongly questioned due to extreme life-cycle (LC) energy requirements. For similar installations to be considered as environmentally sustainable, their LC energy content must be compensated by the respective useful energy production, i.e. their energy pay-back period (EPBP) should be found less than their service period. In this context, an optimum sizing methodology is currently developed, based on the criterion of minimum embodied energy. Various energy autonomous stand-alone PV-lead-acid battery systems are examined and two different cases are investigated; a high solar potential area and a medium solar potential area. By considering that the PV-battery (PV-Bat) system's useful energy production is equal to the remote consumer's electricity consumption, optimum cadmium telluride (CdTe) based systems yield the minimum EPBP (15 years). If achieving to exploit the net PV energy production however, the EPBP is found less than 20 years for all PV types. Finally, the most interesting finding concerns the fact that in all cases examined the contribution of the battery component exceeds 27% of the system LC energy requirements, reflecting the difference between grid-connected and stand-alone configurations.

  11. Control strategy of wind turbine based on permanent magnet synchronous generator and energy storage for stand-alone systems

    DEFF Research Database (Denmark)

    Deng, Fujin; Liu, Dong; Chen, Zhe

    2017-01-01

    This paper investigates a variable speed wind turbine based on permanent magnet synchronous generator and a full-scale power converter in a stand-alone system. An energy storage system(ESS) including battery and fuel cell-electrolyzer combination is connected to the DC link of the full-scale power...... converter through the power electronics interface. Wind is the primary power source of the system, the battery and FC-electrolyzer combination is used as a backup and a long-term storage system to provide or absorb power in the stand-alone system, respectively. In this paper, a control strategy is proposed...... for the operation of this variable speed wind turbine in a stand-alone system, where the generator-side converter and the ESS operate together to meet the demand of the loads. This control strategy is competent for supporting the variation of the loads or wind speed and limiting the DC-link voltage of the full...

  12. Methanol production via pressurized entrained flow biomass gasification – Techno-economic comparison of integrated vs. stand-alone production

    International Nuclear Information System (INIS)

    Andersson, Jim; Lundgren, Joakim; Marklund, Magnus

    2014-01-01

    The main objective with this work was to investigate techno-economically the opportunity for integrated gasification-based biomass-to-methanol production in an existing chemical pulp and paper mill. Three different system configurations using the pressurized entrained flow biomass gasification (PEBG) technology were studied, one stand-alone plant, one where the bark boiler in the mill was replaced by a PEBG unit and one with a co-integration of a black liquor gasifier operated in parallel with a PEBG unit. The cases were analysed in terms of overall energy efficiency (calculated as electricity-equivalents) and process economics. The economics was assessed under the current as well as possible future energy market conditions. An economic policy support was found to be necessary to make the methanol production competitive under all market scenarios. In a future energy market, integrating a PEBG unit to replace the bark boiler was the most beneficial case from an economic point of view. In this case the methanol production cost was reduced in the range of 11–18 Euro per MWh compared to the stand-alone case. The overall plant efficiency increased approximately 7%-units compared to the original operation of the mill and the non-integrated stand-alone case. In the case with co-integration of the two parallel gasifiers, an equal increase of the system efficiency was achieved, but the economic benefit was not as apparent. Under similar conditions as the current market and when methanol was sold to replace fossil gasoline, co-integration of the two parallel gasifiers was the best alternative based on received IRR. - Highlights: • Techno-economic results regarding integration of methanol synthesis processes in a pulp and paper mill are presented. • The overall energy efficiency increases in integrated methanol production systems compared to stand-alone production units. • The economics of the integrated system improves compared to stand-alone alternatives. • Tax

  13. Stand-Alone Personalized Normative Feedback for College Student Drinkers: A Meta-Analytic Review, 2004 to 2014.

    Directory of Open Access Journals (Sweden)

    Keri B Dotson

    Full Text Available Norms clarification has been identified as an effective component of college student drinking interventions, prompting research on norms clarification as a single-component intervention known as Personalized Normative Feedback (PNF. Previous reviews have examined PNF in combination with other components but not as a stand-alone intervention.To investigate the degree to which computer-delivered stand-alone personalized normative feedback interventions reduce alcohol consumption and alcohol-related harms among college students and to compare gender-neutral and gender-specific PNF.Electronic databases were searched systematically through November 2014. Reference lists were reviewed manually and forward and backward searches were conducted.Outcome studies that compared computer-delivered, stand-alone PNF intervention with an assessment only, attention-matched, or active treatment control and reported alcohol use and harms among college students.Between-group effect sizes were calculated as the standardized mean difference in change scores between treatment and control groups divided by pooled standard deviation. Within-group effect sizes were calculated as the raw mean difference between baseline and follow-up divided by pooled within-groups standard deviation.Eight studies (13 interventions with a total of 2,050 participants were included. Compared to control participants, students who received gender-neutral (dbetween = 0.291, 95% CI [0.159, 0.423] and gender-specific PNF (dbetween = 0.284, 95% CI [0.117, 0.451] reported greater reductions in drinking from baseline to follow-up. Students who received gender-neutral PNF reported 3.027 (95% CI [2.171, 3.882] fewer drinks per week at first follow-up and gender-specific PNF reported 3.089 (95% CI [0.992, 5.186] fewer drinks. Intervention effects were small for harms (dbetween = 0.157, 95% CI [0.037, 0.278].Computer-delivered PNF is an effective stand-alone approach for reducing college student

  14. Stand-Alone Personalized Normative Feedback for College Student Drinkers: A Meta-Analytic Review, 2004 to 2014.

    Science.gov (United States)

    Dotson, Keri B; Dunn, Michael E; Bowers, Clint A

    2015-01-01

    Norms clarification has been identified as an effective component of college student drinking interventions, prompting research on norms clarification as a single-component intervention known as Personalized Normative Feedback (PNF). Previous reviews have examined PNF in combination with other components but not as a stand-alone intervention. To investigate the degree to which computer-delivered stand-alone personalized normative feedback interventions reduce alcohol consumption and alcohol-related harms among college students and to compare gender-neutral and gender-specific PNF. Electronic databases were searched systematically through November 2014. Reference lists were reviewed manually and forward and backward searches were conducted. Outcome studies that compared computer-delivered, stand-alone PNF intervention with an assessment only, attention-matched, or active treatment control and reported alcohol use and harms among college students. Between-group effect sizes were calculated as the standardized mean difference in change scores between treatment and control groups divided by pooled standard deviation. Within-group effect sizes were calculated as the raw mean difference between baseline and follow-up divided by pooled within-groups standard deviation. Eight studies (13 interventions) with a total of 2,050 participants were included. Compared to control participants, students who received gender-neutral (dbetween = 0.291, 95% CI [0.159, 0.423]) and gender-specific PNF (dbetween = 0.284, 95% CI [0.117, 0.451]) reported greater reductions in drinking from baseline to follow-up. Students who received gender-neutral PNF reported 3.027 (95% CI [2.171, 3.882]) fewer drinks per week at first follow-up and gender-specific PNF reported 3.089 (95% CI [0.992, 5.186]) fewer drinks. Intervention effects were small for harms (dbetween = 0.157, 95% CI [0.037, 0.278]). Computer-delivered PNF is an effective stand-alone approach for reducing college student drinking and

  15. Hierarchical energy management system for stand-alone hybrid system based on generation costs and cascade control

    International Nuclear Information System (INIS)

    Torreglosa, J.P.; García, P.; Fernández, L.M.; Jurado, F.

    2014-01-01

    Highlights: • We present an energy management system for a stand-alone WT/PV/hydrogen/battery hybrid system. • Hierarchical control composed by master and slave control strategies. • Control assures reliable electricity support for stand-alone applications subject to technical and economic criteria. - Abstract: This paper presents an energy management system (EMS) for stand-alone hybrid systems composed by photovoltaic (PV) solar panels and a wind turbine (WT) as primary energy sources and two energy storage systems, which are a hydrogen system and a battery. The hydrogen system is composed of fuel cell (FC), electrolyzer and hydrogen storage tank. The EMS is a hierarchical control composed by a master control strategy and a slave control strategy. On the one hand, the master control generates the reference powers to meet several premises (such as to satisfy the load power demand, and to maintain the hydrogen tank level and the state of charge (SOC) of the battery between their target margins), taking also into account economic aspects to discriminate between using the battery or hydrogen system. On the other hand, the slave control modifies the reference powers generated by the master control according to the energy sources dynamic limitations, and maintains the DC bus voltage at its reference value. The models, implemented in MATLAB-Simulink environment, have been developed from commercially available components. To check the viability of the proposed EMS, two kinds of simulations were carried out: (1) A long-term simulation of 25 years (expected lifetime of the system) with a sample time of one hour to validate the master control of the EMS; and (2) A short-term simulation with sudden net power variations to validate the slave control of the EMS

  16. Use of stand-alone anchored intervertebral cage in the surgical treatment of patients with symptomatic cervical spondylosis

    Directory of Open Access Journals (Sweden)

    Tilen Žele

    2015-03-01

    Full Text Available Background:One of the most common surgical operations for treatment of cervical spondylosis is anterior cervical discectomy with fusion (ACDF. In order to achieve stable fusion after discectomy and avoid dysphagia the artificial stand-alone zero-profile cages with integrated screws were developed and introduced into clinical practice. Outcome and complications after ACDF with such cages were not adequately assessed yet.Methods:We analyzed 20 consecutive patients with cervical spondylosis treated in our institution with ACDF with stand-alone zero-profile cage Zero-P. Before and after surgery and then 6, 12 and 24 months after surgery we assessed the level of pain with VAS scale, severity of myelopathy with mJOA scale and dysphagia with four level scale. Treatment outcome was assessed after 2 years according to Odom's criteria.Results:No complications occurred during surgery or recovery after surgery. The VAS score after surgery and then after 6, 12 and 24 months was statistically significantly lower than before surgery (p<0.05. The mJOA scores were 6, 12 and 24 months after surgery statistically significantly higher than before surgery (p<0.05. Transient and mild dysphagia was present after surgery in 15% (3/20 of patients and 6, 12 or 24 months after surgery in none. Outcome after 2 years was excellent in 9 patients and good in 11 patients.Conclusions:Operative treatment of symptomatic cervical spondylosis with ACDF using stand-alone zero-profile cage with integrated screws is safe and efficient. Incidence of dysphagia after surgery is low and generally transient.

  17. An optimized Fuzzy Logic Controller by Water Cycle Algorithm for power management of Stand-alone Hybrid Green Power generation

    International Nuclear Information System (INIS)

    Sarvi, Mohammad; Avanaki, Isa Nasiri

    2015-01-01

    Highlights: • A new method to improve the performance of renewable power management is proposed. • The proposed method is based on Fuzzy Logic optimized by the Water Cycle Algorithm. • The proposed method characteristics are compared with two other methods. • The comparisons confirm that the proposed method is robust and effectiveness one. - Abstract: This paper aims to improve the power management system of a Stand-alone Hybrid Green Power generation based on the Fuzzy Logic Controller optimized by the Water Cycle Algorithm. The proposed Stand-alone Hybrid Green Power consists of wind energy conversion and photovoltaic systems as primary power sources and a battery, fuel cell, and Electrolyzer as energy storage systems. Hydrogen is produced from surplus power generated by the wind energy conversion and photovoltaic systems of Stand-alone Hybrid Green Power and stored in the hydrogen storage tank for fuel cell later using when the power generated by primary sources is lower than load demand. The proposed optimized Fuzzy Logic Controller based power management system determines the power that is generated by fuel cell or use by Electrolyzer. In a hybrid system, operation and maintenance cost and reliability of the system are the important issues that should be considered in studies. In this regard, Water Cycle Algorithm is used to optimize membership functions in order to simultaneously minimize the Loss of Power Supply Probability and operation and maintenance. The results are compared with the particle swarm optimization and the un-optimized Fuzzy Logic Controller power management system to prove that the proposed method is robust and effective. Reduction in Loss of Power Supply Probability and operation and maintenance, are the most advantages of the proposed method. Moreover the level of the State of Charge of the battery in the proposed method is higher than other mentioned methods which leads to increase battery lifetime.

  18. Optimization of a stand-alone Solar PV-Wind-DG Hybrid System for Distributed Power Generation at Sagar Island

    Science.gov (United States)

    Roy, P. C.; Majumder, A.; Chakraborty, N.

    2010-10-01

    An estimation of a stand-alone solar PV and wind hybrid system for distributed power generation has been made based on the resources available at Sagar island, a remote area distant to grid operation. Optimization and sensitivity analysis has been made to evaluate the feasibility and size of the power generation unit. A comparison of the different modes of hybrid system has been studied. It has been estimated that Solar PV-Wind-DG hybrid system provides lesser per unit electricity cost. Capital investment is observed to be lesser when the system run with Wind-DG compared to Solar PV-DG.

  19. Losses Evaluation for a Two-Level Three-Phase Stand-Alone Voltage Source Converter Using Model Predictive Control

    DEFF Research Database (Denmark)

    Al hasheem, Mohamed; Dragicevic, Tomislav; Rivera, Marco

    2017-01-01

    conventional and improved controller is conducted in terms of losses. The switching and conduction losses for the VSC are calculated using MATLAB/SIMULINK and PLECS software. A power level up to 1 kW is considered for the conventional and the improved schemes. All simulation and experimental results......This paper discusses a Model Predictive Control (MPC) scheme for a Voltage Source Converter (VSC) where the aim is to minimize losses and Total Harmonics distortion (THD) compared to the conventional MPC scheme. Different Cost Functions (CFs) are applied to the stand-alone VSC. A comparison between...

  20. Dynamic behavior of PEM FCPPs under various load conditions and voltage stability analysis for stand-alone residential applications

    Science.gov (United States)

    Uzunoglu, M.; Onar, O. C.; Alam, M. S.

    In this paper, dynamic behavior and performance of a fuel cell power plant (FCPP) which operates in parallel with a battery bank is tested under classified load conditions, such as mostly resistive, mostly inductive, resistive-inductive and non-linear loads. Thereafter, voltage stability analysis is performed using the dynamic response of the FCPP for stand-alone residential applications. Simulation results are obtained using the MATLAB ® and Simulink ® software packages, based on the mathematical and dynamic electrical models of the system. Using the experimental results, a validated model has been realized and voltage stability analysis is performed through this model.

  1. Economic and Environmental Assessment of a Renewable Stand-Alone Energy Supply System Using Multi-objective Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dohyun; Han, Seulki; Kim, Jiyong Kim [Incheon National University, Incheon (Korea, Republic of)

    2017-06-15

    This study aims to propose a new optimization-based approach for design and analysis of the stand-alone hybrid energy supply system using renewable energy sources (RES). In the energy supply system, we include multiple energy production technologies such as Photovoltaics (PV), Wind turbine, and fossil-fuel-based AC generator along with different types of energy storage and conversion technologies such as battery and inverter. We then select six different regions of Korea to represent various characteristics of different RES potentials and demand profiles. We finally designed and analyzed the optimal RES stand-alone energy supply system in the selected regions using multiobjective optimization (MOOP) technique, which includes two objective functions: the minimum cost and the minimum CO{sub 2} emission. In addition, we discussed the feasibility and expecting benefits of the systems by comparing to conventional systems of Korea. As a result, the region of the highest RES potential showed the possibility to remarkably reduce CO{sub 2} emissions compared to the conventional system. Besides, the levelized cost of electricity (LCOE) of the RES-based energy system is identified to be slightly higher than conventional energy system: 0.35 and 0.46 $/kWh, respectively. However, the total life-cycle emission of CO{sub 2} (LCECO{sub 2}) can be reduced up to 470 gCO{sub 2}/kWh from 490 gCO{sub 2}/kWh of the conventional systems.

  2. Comparison of pulp-mill-integrated hydrogen production from gasified black liquor with stand-alone production from gasified biomass

    International Nuclear Information System (INIS)

    Andersson, E.; Harvey, S.

    2007-01-01

    When gasified black liquor is used for hydrogen production, significant amounts of biomass must be imported. This paper compares two alternative options for producing hydrogen from biomass: (A) pulp-mill-integrated hydrogen production from gasified back liquor; and (B) stand-alone production of hydrogen from gasified biomass. The comparison assumes that the same amount of biomass that is imported in Alternative A is supplied to a stand-alone hydrogen production plant and that the gasified black liquor in Alternative B is used in a black liquor gasification combined cycle (BLGCC) CHP unit. The comparison is based upon equal amounts of black liquor fed to the gasifier, and identical steam and power requirements for the pulp mill. The two systems are compared on the basis of total CO 2 emission consequences, based upon different assumptions for the reference energy system that reflect different societal CO 2 emissions reduction target levels. Ambitions targets are expected to lead to a more CO 2 -lean reference energy system, in which case hydrogen production from gasified black liquor (Alternative A) is best from a CO 2 emissions' perspective, whereas with high CO 2 emissions associated with electricity production, hydrogen from gasified biomass and electricity from gasified black liquor (Alternative B) is preferable. (author)

  3. Multi-objective optimal planning of the stand-alone microgrid system based on different benefit subjects

    International Nuclear Information System (INIS)

    Guo, Li; Wang, Nan; Lu, Hai; Li, Xialin; Wang, Chengshan

    2016-01-01

    As an important means to realize the energetic complementarity and improve the efficiency of renewable resources, the stand-alone microgrid (SAMG) system gains attention increasingly, especially in islands and remote areas. In this paper, considering the interest conflict of the distribution company and the distributed generation owner, a new multi-objective optimal planning model is formulated for medium voltage SAMG. Besides, to avoid the power constraint of distributed generation (DG) once the over-limit voltage occurs, a novel two-step power dispatch control method including the voltage regulation strategy is proposed, in which the absorption of distributed power by energy storage system (ESS) and the reactive power adjustment though its power control system are used to regulate voltage. The goal of this paper is to search the Pareto-optimal front of the site and capacity of DG as well as the contract price between both parties, and thus can provide effective references for practical planning of SAMG. Considering the high cost of ESS, the investment analysis of ESS is also discussed in the paper. - Highlights: • A multi-objective planning model based on different benefit subjects is proposed. • A two-step power dispatch method including the voltage regulation is proposed. • The economical efficiency of the proposed model is analyzed. • The effective reference for the stand-alone microgrid planning is provided.

  4. SedInConnect: a stand-alone, free and open source tool for the assessment of sediment connectivity

    Science.gov (United States)

    Crema, Stefano; Cavalli, Marco

    2018-02-01

    There is a growing call, within the scientific community, for solid theoretic frameworks and usable indices/models to assess sediment connectivity. Connectivity plays a significant role in characterizing structural properties of the landscape and, when considered in combination with forcing processes (e.g., rainfall-runoff modelling), can represent a valuable analysis for an improved landscape management. In this work, the authors present the development and application of SedInConnect: a free, open source and stand-alone application for the computation of the Index of Connectivity (IC), as expressed in Cavalli et al. (2013) with the addition of specific innovative features. The tool is intended to have a wide variety of users, both from the scientific community and from the authorities involved in the environmental planning. Thanks to its open source nature, the tool can be adapted and/or integrated according to the users' requirements. Furthermore, presenting an easy-to-use interface and being a stand-alone application, the tool can help management experts in the quantitative assessment of sediment connectivity in the context of hazard and risk assessment. An application to a sample dataset and an overview on up-to-date applications of the approach and of the tool shows the development potential of such analyses. The modelled connectivity, in fact, appears suitable not only to characterize sediment dynamics at the catchment scale but also to integrate prediction models and as a tool for helping geomorphological interpretation.

  5. A Control Approach and Supplementary Controllers for a Stand-Alone System with Predominance of Wind Generation

    Directory of Open Access Journals (Sweden)

    Tiago Lukasievicz

    2018-02-01

    Full Text Available This paper proposes a control approach and supplementary controllers for the operation of a hybrid stand-alone system composed of a wind generation unit and a conventional generation unit based on synchronous generator (CGU. The proposed controllers allow the islanded or isolated operation of small power systems with predominance of wind generation. As an advantage and a paradigm shift, the DC-link voltage of the wind unit is controlled by means of a conventional synchronous generator connected to the AC grid of the system. Two supplementary controllers, added to a diesel generator (DIG and to a DC dump load (DL, are proposed to control the DC-link voltage. The wind generation unit operates in V-f control mode and the DIG operates in PQ control mode, which allows the stand-alone system to operate either in wind-diesel (WD mode or in wind-only (WO mode. The strong influence of the wind turbine speed variations in the DC-link voltage is mitigated by a low-pass filter added to the speed control loop of the wind turbine. The proposed control approach does not require the use battery bank and ultra-capacitor to control the DC-link voltage in wind generation units based on fully rated converter.

  6. Study on Soft Phase Locked Method to Solving the Synchronization Problem of Active Power Filter in Stand-alone Power Grid

    DEFF Research Database (Denmark)

    Zhuo, Fang; Wu, Longhui; Chen, Zhe

    2009-01-01

    on zero-cross detection can't work effectively in small rating stand-alone power grid. Then a soft phase locked loop with additional filter is proposed. It can lock the phase angle on to the positive sequence of fundamental voltage accurately and rapidly. It ensures the performance of APF applied...... in the small rating stand-alone power grid. Moreover, the soft phase locked loop is easy to be implemented in a Digital Signal Processor (DSP). Simulation and experimental results validate that the soft phase locked loop has satisfactory performance.......Traditional LC filters can't work stably in small rating stand-alone power grid. So active power filter (APF) is becoming an important tool to solve the power quality problem in small rating stand-alone power grid. In most current detection algorithm of APF, it needs a synchronizing signal. Firstly...

  7. Clinical and radiological outcome after anterior cervical discectomy and fusion with stand-alone empty polyetheretherketone (PEEK) cages.

    Science.gov (United States)

    Shiban, Ehab; Gapon, Karina; Wostrack, Maria; Meyer, Bernhard; Lehmberg, Jens

    2016-02-01

    To evaluate long-term results after one-, two-, and three-level anterior cervical discectomy and fusion (ACDF) with stand-alone empty polyetheretherketone (PEEK) cages. We performed a retrospective review of a consecutive patient cohort that underwent ACDF with stand-alone empty PEEK cages between 2007 and 2010 with a minimum follow-up of 12 months. Radiographic follow-up included static and flexion/extension radiographs. Changes in the operated segments were measured and compared to radiographs directly after surgery. Clinical outcome was evaluated by a physical examination, pain visual analog scale (VAS), and health-related quality of life (HRQL) using the EuroQOL questionnaire (EQ-5D). Analysis of associations between fusion, subsidence, cervical alignment, and clinical outcome parameters were performed. Of 407 consecutive cases, 318 met all inclusion criteria. Follow-up data were obtained from 265 (83 %) cases. The mean age at presentation was 55 years and 139 patients were male (52 %). In the sample, 127, 125, and 13 patients had one-, two-, and three-level surgeries, respectively; 132 (49 %) presented with spondylotic cervical myelopathy and 133 (50 %) with cervical radiculopathy. Fusion was achieved in 85, 95, and 94 % of segments in one-, two-, and three-level surgeries, respectively. Non-fusion was associated with higher VAS pain levels. Radiographic adjacent segment disease (ASD) was observed in 20, 29, and 15 % in one-, two-, and three-level surgeries, respectively. ASD was associated with lower HRQL. Subsidence was observed in 25, 27, and 15 % of segments in one-, two-, and three-level surgeries, respectively. However, this had no influence on clinical outcome. Follow-up operations for symptomatic adjacent disc disease and implant failure at index level were needed in 16 (6 %) and four (1.5 %) cases, respectively. Younger age was associated with better clinical outcome. Multilevel surgery favored better myelopathy outcomes and fusion reduced overall

  8. Online retrieval of patient information by asynchronous communication between general purpose computer and stand-alone personal computer

    International Nuclear Information System (INIS)

    Tsutsumi, Reiko; Takahashi, Kazuei; Sato, Toshiko; Komatani, Akio; Yamaguchi, Koichi

    1988-01-01

    Asynchronous communication was made between host (FACOM M-340) and personal computer (OLIBETTIE S-2250) to get patient's information required for RIA test registration. The retrieval system consists of a keyboad input of six numeric codes, patient's ID, and a real time reply containing six parameters for the patient. Their identified parameters are patient's name, sex, date of birth (include area), department, and out- or inpatient. Linking this program to RIA registration program for individual patient, then, operator can input name of RIA test requested. Our simple retrieval program made a useful data network between different types of host and stand-alone personal computers, and enabled us accurate and labor-saving registration for RIA test. (author)

  9. Life cycle assessment study of a 4.2 kW{sub p} stand-alone photovoltaic system

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Valverde, R.; Miguel, C.; Urbina, A. [Universidad Politecnica de Cartagena, Departamento de Electronica, Tecnologia de Computadoras y Proyectos, Campus Muralla del Mar, 30203, Cartagena, Murcia (Spain); Martinez-Bejar, R. [Universidad de Murcia, Departamento de Ingenieria de la Informacion y las Comunicaciones, Facultad de Informatica, Campus de Espinardo, 30071, Murcia (Spain)

    2009-09-15

    The energetic and environmental life cycle assessment of a 4.2 kW{sub p} stand-alone photovoltaic system (SAPV) at the University of Murcia (south-east of Spain) is presented. PV modules and batteries are the energetically and environmentally most expensive elements. The energy pay-back time was found to be 9.08 years and the specific CO{sub 2} emissions was calculated as 131 g/kWh. The SAPV system has been environmentally compared with other supply options (diesel generator and Spanish grid) showing lower impacts in both cases. The results show the CO{sub 2}-emission reduction potential of SAPV systems in southern European countries and point out the critical environmental issues in these systems. (author)

  10. Integration of hydrogen energy technologies in stand-alone power systems analysis of the current potential for applications

    International Nuclear Information System (INIS)

    Zoulias, E.I.; Lymberopoulos, N.; Tsoutsos, T.; Glockner, R.; Mydske, H.J.; Vosseler, I.; Gavalda, O.; Taylor, P.

    2006-01-01

    The European study entitled: 'Market Potential Analysis for Introduction of Hydrogen Energy Technology in Stand-Alone Power Systems (H-SAPS)' aimed to establish a broad understanding of the market potential for H-SAPS and provide a basis for promoting in wide scale new technological applications. The scope of the study was limited to small and medium installations, up to a few hundred kW power rating and based on RE as the primary energy source. The potential for hydrogen technology in SAPS was investigated through an assessment of the technical potential for hydrogen, the market analysis and the evaluation of external factors. The results are mostly directed towards action by governments and the research community but also industry involvement is identified. The results include targeted market research, establishment of individual cost targets, regulatory changes to facilitate alternative grid solutions, information and capacity building, focused technology research and bridging the technology gaps. (author)

  11. Extra-peritoneal pressure packing without external pelvic fixation: A life-saving stand-alone surgical treatment

    Directory of Open Access Journals (Sweden)

    Guy Ron

    2015-01-01

    Full Text Available Purpose: Traditional maneuvers aim to decrease retroperitoneal bleeding in hemodynamically unstable multi-trauma patients with unstable pelvic fractures, are reportedly successful in approximately only 50%. The life-saving effect of extra-peritoneal pressure packing (EPPP is based on direct compression and control of both venous and arterial retroperitoneal bleeders. This study describes the safety and efficacy of emergent EPPP employment, as a stand-alone surgical treatment, that is, carried out without external pelvic fixation or emergent angiography. Materials and Methods: A retrospective chart review of all hemodynamic unstable, multi-trauma patients with mechanically unstable pelvic fractures treated by the EPPP technique at our medical center between the years 2005 and 2011. Survival rates, clinical, and physiological outcomes were followed prospectively. Results: Twenty-five of the 181 pelvic fracture patients had biomechanically unstable fractures that required surgical fixation. Fourteen of those 25 patients had deteriorating hemodynamic instability from massive pelvic bleeding which was resistant to resuscitation, and they underwent EPPP, as a stand-alone treatment. The procedure successfully achieved hemodynamic stability in all 14 patients and obviated the early mortality associated with massive pelvic bleeding. Three of these patients eventually succumbed to their multiple injuries. Conclusion: Implementation of EPPP improved all measured physiological outcome parameters and survival rates of hemodynamically unstable multi-trauma patients with unstable pelvic fractures in our trauma center. It provided the unique advantage of directly compressing the life-threatening retroperitoneal bleeders by applying direct pressure and causing a tamponade effect to stanch venous and arterial pelvic blood flow and obviate the early mortality associated with massive pelvic bleeding.

  12. Leadership in Dental Hygiene Degree Completion Programs: A Pilot Study Comparing Stand-Alone Leadership Courses and Leadership-Infused Curricula.

    Science.gov (United States)

    Smith, Michelle L; Gurenlian, JoAnn R; Freudenthal, Jacqueline J; Farnsworth, Tracy J

    2016-05-01

    The aim of this study was to define the extent to which leadership and leadership skills are taught in dental hygiene degree completion programs by comparing stand-alone leadership courses/hybrid programs with programs that infuse leadership skills throughout the curricula. The study involved a mixed-methods approach using qualitative and quantitative data. Semi-structured interviews were conducted with program directors and faculty members who teach a stand-alone leadership course, a hybrid program, or leadership-infused courses in these programs. A quantitative comparison of course syllabi determined differences in the extent of leadership content and experiences between stand-alone leadership courses and leadership-infused curricula. Of the 53 U.S. dental hygiene programs that offer degree completion programs, 49 met the inclusion criteria, and 19 programs provided course syllabi. Of the program directors and faculty members who teach a stand-alone leadership course or leadership-infused curriculum, 16 participated in the interview portion of the study. The results suggested that competencies related to leadership were not clearly defined or measurable in current teaching. Reported barriers to incorporating a stand-alone leadership course included overcrowded curricula, limited qualified faculty, and lack of resources. The findings of this study provide a synopsis of leadership content and gaps in leadership education for degree completion programs. Suggested changes included defining a need for leadership competencies and providing additional resources to educators such as courses provided by the American Dental Education Association and the American Dental Hygienists' Association.

  13. A cross-sectional study of stand-alone percutaneous coronary intervention in a Nigerian cardiac catheterization laboratory.

    Science.gov (United States)

    Johnson, Adeyemi; Falase, Bode; Ajose, Ifeoluwa; Onabowale, Yemi

    2014-01-16

    There is a paucity of diagnostic and therapeutic facilities in Nigeria to confirm coronary artery disease and offer appropriate interventional therapy. There is now a private cardiac catheterization laboratory in Lagos but as there are no sustained Open Heart Surgery programmes, percutaneous coronary interventions are currently being performed without surgical backup. This study was designed to assess results of stand-alone percutaneous coronary intervention (PCI) as currently practiced in Lagos, Nigeria. This cross-sectional study was conducted between July 2009 and July 2012. The study included all patients that underwent PCI in Lagos. Data was extracted from a prospectively maintained database. Coronary artery disease was confirmed in 80 (52.6%) of 152 Nigerians referred with a diagnosis of Ischaemic Heart Disease. There were 53 males (66.2%) and 27 females (33.8%). The average age was 60.3 +/-9.6 years and average euroscore was 4.5 +/-3.1. Of the 80 patients, 77 (96.3%) had significant stenoses and were candidates for revascularization. Distribution of significant stenoses was one in 32 patients (41.5%), two in 11 patients (14.3%), three in 19 patients (24.7%), four in 13 patients (16.9%) and five in 2 patients (2.6%). PCI was performed in 48 (62.3%) of the patients eligible for revascularization as the coronary anatomy in the remaining patients was not suitable for PCI. The indication for PCI was for myocardial infarction or unstable angina in 39 patients (81.2%). PCI was performed with PTCA plus stenting in 41 patients (85.4%) and with PTCA alone in 7 patients (14.6%) with good angiographic results. Overall 29 of the 48 patients (60.4%) had complete revascularization of significant stenoses. Complications of PCI were bleeding that required blood transfusion in 1 patient (2.1%), minor femoral haematomas in 2 patients (4.2%), and a major adverse clinical event in 1 patient (2.1%). A stand-alone PCI programme has been developed in Lagos, Nigeria. Both elective

  14. Fashioning Identity

    DEFF Research Database (Denmark)

    Mackinney-Valentin, Maria

    of identity displays, and creating tension between personal statements and social performances. Fashioning Identity explores how this tension is performed through fashion production and consumption,by examining a diverse series of case studies - from ninety-year old fashion icons to the paradoxical rebellion......We dress to communicate who we are, or who we would like others to think we are, telling seductive fashion narratives through our adornment. Yet, today, fashion has been democratized through high-low collaborations, social media and real-time fashion mediation, complicating the basic dynamic...... in 'normcore', and from soccer jerseys in Kenya to heavy metal band T-shirts in Europe. Through these cases, the role of time, gender, age memory, novelty, copying, the body and resistance are considered within the context of the contemporary fashion scene. Offering a fresh approach to the subject...

  15. Adaptive Artificial intelligence based fuzzy logic MPPTcontrol for stande-alone photovoltaic system under different atmospheric conditions

    Directory of Open Access Journals (Sweden)

    Zaghba Layachi

    2015-08-01

    Full Text Available there is an increased need for analysing the effect of atmospheric variables on photovoltaic (PV production and performance. The outputs from the different PV cells in different atmospheric conditions, such as irradiation and temperature , differ from each other evidencing knowledge deficiency in PV systems [14]. Maximum power point tracking (MPPT methods are used to maximize the PV array output power by tracking continuously the maximum power point (MPP. Among all MPPT methods existing in the literature, perturb and observe (P&O is the most commonly used for its simplicity and ease of implementation; however, it presents drawbacks such as slow response speed, oscillation around the MPP in steady state, and even tracking in wrong way under rapidly changing atmospheric conditions. In order to allow a functioning around the optimal point Mopt, we have inserted a DC-DC converter (Buck–Boost for a better matching between the PV and the load. This paper, we study the Maximum power point tracking using adaptive Intelligent fuzzy logic and conventional (P&O control for stande-alone photovoltaic Array system .In particular, the performances of the controllers are analyzed under variation weather conditions with are constant temperature and variable irradiation. The proposed system is simulated by using MATLAB-SIMULINK. According to the results, fuzzy logic controller has shown better performance during the optimization.

  16. Modeling and Experimental Test of Grid-Tied Photovoltaic Cell Emulating System in the Stand-alone Mode

    Directory of Open Access Journals (Sweden)

    Vu Minh Phap

    2017-06-01

    Full Text Available In recent decades, generation of electricity from solar arrays has been increased to meet the world's growing energy demand. However, the utilization rate of the power conditioner in the grid-tied solar power system is low because the operation of solar panels is dependent on sunlight. Thus, we studied the method that the small scale wind power generating system in size from a few hundred watts to two or three kilowatts can be connected to the grid-tied power conditioner of the solar power system for residential applications with low power ratings (single phase, size is limited to 10kW by emulating characteristic of the solar panel. In this paper, we introduce the application of the grid-tied PV cell emulating system in the stand-alone mode to improve the utilization rate of the power conditioner. The simulation and experimental test results verify that the PV cell emulating system can operate the power conditioner of the gridtied solar power system.

  17. Automation infrastructure and operation control strategy in a stand-alone power system based on renewable energy sources

    Science.gov (United States)

    Ziogou, Chrysovalantou; Ipsakis, Dimitris; Elmasides, Costas; Stergiopoulos, Fotis; Papadopoulou, Simira; Seferlis, Panos; Voutetakis, Spyros

    The design of the automation system and the implemented operation control strategy in a stand-alone power system in Greece are fully analyzed in the present study. A photovoltaic array and three wind generators serve as the system main power sources and meet a predefined load demand. A lead-acid accumulator is used to compensate the inherent power fluctuations (excess or shortage) and to regulate the overall system operation, based on a developed power management strategy. Hydrogen is produced by using system excess power in a proton exchange membrane (PEM) electrolyzer and is further stored in pressurized cylinders for subsequent use in a PEM fuel cell in cases of power shortage. A diesel generator complements the integrated system and is employed only in emergency cases, such as subsystems failure. The performance of the automatic control system is evaluated through the real-time operation of the power system where data from the various subsystems are recorded and analyzed using a supervised data acquisition unit. Various network protocols were used to integrate the system devices into one central control system managing in this way to compensate for the differences between chemical and electrical subunits. One of the main advantages is the ability of process monitoring from distance where users can perform changes to system principal variables. Furthermore, the performance of the implemented power management strategy is evaluated through simulated scenarios by including a case study analysis on system abilities to meet higher than expected electrical load demands.

  18. Stand-alone power systems for the future: Optimal design, operation and control of solar-hydrogen energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Ulleberg, Oeystein

    1998-12-31

    This thesis gives a systematic review of the fundamentals of energy systems, the governing physical and chemical laws related to energy, inherent characteristics of energy system, and the availability of the earth`s energy. It shows clearly why solar-hydrogen systems are one of the most viable options for the future. The main subject discussed is the modelling of SAPS (Stand-Alone Power Systems), with focus on photovoltaic-hydrogen energy systems. Simulation models for a transient simulation program are developed for PV-H{sub 2} components, including models for photovoltaics, water electrolysis, hydrogen storage, fuel cells, and secondary batteries. A PV-H{sub 2} demonstration plant in Juelich, Germany, is studied as a reference plant and the models validated against data from this plant. Most of the models developed were found to be sufficiently accurate to perform short-term system simulations, while all were more than accurate enough to perform long-term simulations. Finally, the verified simulation models are used to find the optimal operation and control strategies of an existing PV-H{sub 2} system. The main conclusion is that the simulation methods can be successfully used to find optimal operation and control strategies for a system with fixed design, and similar methods could be used to find alternative system designs. 148 refs., 78 figs., 31 tabs.

  19. Multi-Objective Optimal Design of Stand-Alone Hybrid Energy System Using Entropy Weight Method Based on HOMER

    Directory of Open Access Journals (Sweden)

    Jiaxin Lu

    2017-10-01

    Full Text Available Implementation of hybrid energy system (HES is generally considered as a promising way to satisfy the electrification requirements for remote areas. In the present study, a novel decision making methodology is proposed to identify the best compromise configuration of HES from a set of feasible combinations obtained from HOMER. For this purpose, a multi-objective function, which comprises four crucial and representative indices, is formulated by applying the weighted sum method. The entropy weight method is employed as a quantitative methodology for weighting factors calculation to enhance the objectivity of decision-making. Moreover, the optimal design of a stand-alone PV/wind/battery/diesel HES in Yongxing Island, China, is conducted as a case study to validate the effectiveness of the proposed method. Both the simulation and optimization results indicate that, the optimization method is able to identify the best trade-off configuration among system reliability, economy, practicability and environmental sustainability. Several useful conclusions are given by analyzing the operation of the best configuration.

  20. Development of a Laser-Powered Dielectric Structure-Based Accelerator as a Stand-Alone Particle Source

    International Nuclear Information System (INIS)

    Yoder, R. B.; Travish, G.; Arab, E. R.; Fong, D.; Hoyer, Z.; Lacroix, U. H.; Vartanian, N.; Rosenzweig, J. B.

    2010-01-01

    An experimental program to develop and build a dielectric-based slab-symmetric structure (the micro-accelerator platform, or MAP) for generating and accelerating low-energy electrons is underway at UCLA and Manhattanville College. This optical acceleration structure is effectively a resonant cavity powered by a side-coupled laser, and has applications as a radiation source for medicine or industry. We present recent experimental and computational results on the accelerator, and progress toward its incorporation into a self-contained particle source. Such a particle source would incorporate a micron-scale electron emitter and a non-relativistic capture region to enable self-injection into the synchronous field within the accelerator. A prototype of the accelerator itself has been constructed from candidate dielectric materials using micromanufacturing techniques; the current status of the testing program is described. A novel electron emitter incorporating pyroelectric crystals with field-enhancing tips has been demonstrated to produce steady currents; the results are dependent on tip geometry, and appear suitable for injection into a microstructure. Extension of the MAP concept to non-relativistic velocities, as in the stand-alone source, requires a tapered structure that gives rise to numerous complications including beam defocusing and manufacturing challenges; approaches for addressing these complications are mentioned.

  1. Life cycle assessment of stand-alone photovoltaic (SAPV) system under on-field conditions of New Delhi, India

    International Nuclear Information System (INIS)

    Sharma, Rakhi; Tiwari, G.N.

    2013-01-01

    In this paper, life cycle analysis has been carried out to evaluate overall performance of given rated stand-alone solar photovoltaic (SAPV) in terms of basic energy matrices, life cycle cost analysis, and earned carbon credit. Further, the experimentally calculated actual on-field life cycle performance results of existing outdoor SAPV system (i.e. almost 20 years old) have been represented with respect to the potential (max.) performance of same SAPV system estimated under same environmental conditions of solar intensity, ambient temperature, PV operating temperature as obtained during actual on-field performance evaluation. This new approach of overall performance evaluation by considering the on-field SAPV system installation as new (i.e. with potential/max. performance) and old (i.e. with actual performance) under same environmental conditions provides an inclusive comparative life cycle assessment of on-field PV system. - Highlights: • We present comparative life cycle assessment methodology for outdoor PV system. • We evaluate on-field PV system life performance by considering it as new and old. • We examine fall in actual on-field PV performance compared to potential performance. • PV system techno-economic performance reduces with the long term exposure or aging. • We observe fall in earned carbon credit and rise in cost/kWh as PV system ages

  2. Comparison of Turkey’s Geographical Regions in terms of Stand-Alone PV System Design and Cost Parameters

    Directory of Open Access Journals (Sweden)

    Nevzat Onat

    2017-01-01

    Full Text Available Stand-alone photovoltaic (SAPV systems are widely used in rural areas where there is no national grid or as a precaution against power outages. In this study, technical and economic analysis of a SAPV system was carried out using meteorological data for 75 province centers in seven geographical regions of Turkey. Obtained results for each province center were separated by geographical area. The averages of the centers for each region are taken as output. A calculation algorithm based on MsExcel has been established for these operations. The analyses made with the developed algorithm are repeated for five different scenarios that they cover periods of time when a constant strong load is active for all seasons (winter, spring, summer, and autumn and all year round. The developed algorithm calculates the life-cycle cost, the unit energy cost, the electrical capacity utilization rate, the amount of generated/excess energy per month, the initial investment/replacement, and operating and maintenance (O&M costs of each element. As a result, geographical regions of Turkey are compared in terms of these outputs graphically. Further investigations may include the sale of excess energy generated, small-scale PV system cost factors parallel to the grid, and the effects of government incentives.

  3. Adult Degenerative Scoliosis with Spinal Stenosis Treated with Stand-Alone Cage via an Extreme Lateral Transpsoas Approach; a Case Report and Literature Review

    Directory of Open Access Journals (Sweden)

    Arvind von Keudell

    2015-04-01

    Full Text Available We report the case of a 73-year-old female with severe degenerative scoliosis and back and leg pain that wassuccessfully treated with stand- alone cages via an extreme lateral transpsoas approach. This patient had declinedopen surgery and instrumentation due to her advanced age concerns about potential side effects.

  4. Stand-alone Inverter: Reviews, Models and Tests the exist system in Term of the Power Quality, and Suggestions to Design it

    Directory of Open Access Journals (Sweden)

    Ali Algaddafi

    2016-10-01

    Full Text Available Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM inverters, notably for obtaining electricity from renewable systems. This paper critical review the previous studies in designing stand-alone inverter and modelling the inverter with two control loops to improve and provide a high-quality power of a stand-alone inverter. Multi-loop control techniques for a stand-alone inverter are utilised as the first loop is a capacitor current control to provide active damping and improve transient and steady state inverter performance. The capacitor current control is cheaper than inductor current control, where a small current sensing resistor is used. The second loop is the output voltage control that is used to improve the system performance and also control the output voltage. The power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the grid. The suggestions and key findings to design the stand-alone inverter are given based in the reviewing of previous publications and from the literature’s point of view.

  5. Fashion Merchandising.

    Science.gov (United States)

    New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

    This curriculum bulletin provides a curriculum for a one-year course in fashion merchandising, offered in the third year of the marketing education sequence. It is designed to give students majoring in marketing a survey of basic information about the field of fashion merchandising. Students are offered the opportunity to become familiar with a…

  6. Energetic and financial investigation of a stand-alone solar-thermal Organic Rankine Cycle power plant

    International Nuclear Information System (INIS)

    Tzivanidis, Christos; Bellos, Evangelos; Antonopoulos, Kimon A.

    2016-01-01

    Highlights: • A stand-alone solar driven Organic Rankine Cycle is optimized parametrically. • The system is optimized energetically and financially. • Nine working fluids are tested with cyclohexane to be the most suitable. • A collecting area of 25,000 m 2 parabolic trough collectors is the optimum solution. • The maximum IRR is 13.46% and the payback period is about 9 years. - Abstract: The use of solar thermal energy for electricity production is a clean and sustainable way to cover the increasing energy needs of our society. The most mature technology for capturing solar energy in high temperature levels is the parabolic trough collectors (PTC). In this study, an Organic Rankine Cycle (ORC) coupled with PTC is analyzed parametrically in order to be optimized financially and energetically. The first step is the thermodynamic investigation of the ORC by using various working fluids. The second step is the energetic and financial investigation of the total system which includes the solar field, the storage tank and the ORC module. By testing many combinations of collecting areas and storage tank volumes, finally cyclohexane proved to be the most suitable working fluid for producing 1 MW el with PTC. Specifically, in the optimum situation a solar field of 25,000 m 2 with storage tank of about 300 m 3 leads to a payback period of 9 years and to an internal rate of return (IRR) equal to 13.46%. Moreover, an economic comparison for different commercial collectors is presented, with Eurotrough ET-150 being the financially optimum solution for this case study.

  7. An adaptive artificial neural network model for sizing stand-alone photovoltaic systems: Application for isolated sites in Algeria

    International Nuclear Information System (INIS)

    Mellit, A.; Benghanem, M.; Hadj Arab, A.; Guessoum, G.

    2004-07-01

    In this paper we investigate, by using an adaptive Artificial Neural Network (ANN), in order to find a suitable model for sizing Stand-Alone Photovoltaic (SAPV) systems, based on a minimum of input data. This model combines Radial Basis Function (RBF) network and Infinite Impulse Response (IIR) filter in order to accelerate the convergence of the network. For the sizing of a photovoltaic (PV) system, we need to determine the optimal sizing coefficients (K PV , K B . These coefficients allow us to determine the number of solar panels and storage batteries necessary to satisfy a given consumption, especially in isolated sites where the global solar radiation data is not always available and which are considered the most important parameters for sizing a PV system. Obtained results by classical models (analytical, numerical, analytical- numerical, B-spline function) and new models like feed-forward (MLP), radial basis function (RBF), MLP-IIR and RBF-IIR have been compared with experimental sizing coefficients in order to illustrate the accuracy of the results of the new developed model. This model has been trained by using 200 known optimal sizing coefficients corresponding to 200 locations in Algeria. In this way, the adaptive model was trained to accept and even handle a number of unusual cases, the unknown validation sizing coefficients set produced very set accurate estimation and a correlation coefficient of 98% was obtained between the calculated and that estimated by the RBF-IIR model. This result indicates that the proposed method can be successfully used for the estimation of optimal sizing coefficients of SAPV systems for any locations in Algeria, but the methodology can be generalized using different locations over the world. (author)

  8. System dynamic model and charging control of lead-acid battery for stand-alone solar PV system

    KAUST Repository

    Huang, B.J.

    2010-05-01

    The lead-acid battery which is widely used in stand-alone solar system is easily damaged by a poor charging control which causes overcharging. The battery charging control is thus usually designed to stop charging after the overcharge point. This will reduce the storage energy capacity and reduce the service time in electricity supply. The design of charging control system however requires a good understanding of the system dynamic behaviour of the battery first. In the present study, a first-order system dynamics model of lead-acid battery at different operating points near the overcharge voltage was derived experimentally, from which a charging control system based on PI algorithm was developed using PWM charging technique. The feedback control system for battery charging after the overcharge point (14 V) was designed to compromise between the set-point response and the disturbance rejection. The experimental results show that the control system can suppress the battery voltage overshoot within 0.1 V when the solar irradiation is suddenly changed from 337 to 843 W/m2. A long-term outdoor test for a solar LED lighting system shows that the battery voltage never exceeded 14.1 V for the set point 14 V and the control system can prevent the battery from overcharging. The test result also indicates that the control system is able to increase the charged energy by 78%, as compared to the case that the charging stops after the overcharge point (14 V). © 2010 Elsevier Ltd. All rights reserved.

  9. Techno-economic analysis of stand-alone photovoltaic/wind/battery/hydrogen systems for very small-scale applications

    Directory of Open Access Journals (Sweden)

    Stojković Saša M.

    2016-01-01

    Full Text Available The paper presents the results of a technical and economic analysis of three stand-alone hybrid power systems based on renewable energy sources which supply a specific group of low-power consumers. This particular case includes measuring sensors and obstacle lights on a meteorological mast for wind measurements requiring an uninterrupted power supply in cold climate conditions. Although these low-power (100 W measuring sensors and obstacle lights use little energy, their energy consumption is not the same as the available solar energy obtained on a daily or seasonal basis. In the paper, complementarity of renewable energy sources was analysed, as well as one of short-term lead-acid battery-based storage and seasonal, hydrogen-based (electrolyser, H2 tank, and fuel cells storage. These relatively complex power systems were proposed earlier for high-power consumers only, while this study specifically highlights the role of the hydrogen system for supplying low-power consumers. The analysis employed a numerical simulation method using the HOMER software tool. The results of the analysis suggest that solar and wind-solar systems, which involve meteorological conditions as referred to in this paper, include a relatively large number of lead-acid batteries. Additionally, the analysis suggests that the use of hydrogen power systems for supplying low power-consumers is entirely justifiable, as it significantly reduces the number of batteries (two at minimum in this particular case. It was shown that the increase in costs induced by the hydrogen system is acceptable.

  10. On fashion and fashion discourses

    OpenAIRE

    González, A.M. (Ana Marta)

    2010-01-01

    While critical views inherited from the past still influence our appraisal of fashion, its pervasiveness in contemporary society calls for an explanation. In this article I attempt to show how the importance of fashion in our society is the result of a combination of a structurally modern space and Romantic cultural ideals. I conclude that, despite its frivolous appearance, fashion is not only a powerful social indicator, but also a particular means of bringing together the divers...

  11. Desktop grid computing

    CERN Document Server

    Cerin, Christophe

    2012-01-01

    Desktop Grid Computing presents common techniques used in numerous models, algorithms, and tools developed during the last decade to implement desktop grid computing. These techniques enable the solution of many important sub-problems for middleware design, including scheduling, data management, security, load balancing, result certification, and fault tolerance. The book's first part covers the initial ideas and basic concepts of desktop grid computing. The second part explores challenging current and future problems. Each chapter presents the sub-problems, discusses theoretical and practical

  12. Linux Desktop Pocket Guide

    CERN Document Server

    Brickner, David

    2005-01-01

    While Mac OS X garners all the praise from pundits, and Windows XP attracts all the viruses, Linux is quietly being installed on millions of desktops every year. For programmers and system administrators, business users, and educators, desktop Linux is a breath of fresh air and a needed alternative to other operating systems. The Linux Desktop Pocket Guide is your introduction to using Linux on five of the most popular distributions: Fedora, Gentoo, Mandriva, SUSE, and Ubuntu. Despite what you may have heard, using Linux is not all that hard. Firefox and Konqueror can handle all your web bro

  13. urban fashion

    OpenAIRE

    jospitre, maryse

    1998-01-01

    how can architecture transcend style in the fashion world? my thesis offers experiences for both the public and private realm of the fashion industry. for the public, the opportunity to see and feel the clothes on the runways. for the private, the designers can work, show and display all in one building. the project divides itself into two worlds, the static vs. the dynamic. in a world where fashion is in and out in a matter of a season, can architecture transcend the moment?

  14. Fashion Objects

    DEFF Research Database (Denmark)

    Andersen, Bjørn Schiermer

    2009-01-01

    This article attempts to create a framework for understanding modern fashion phenomena on the basis of Durkheim's sociology of religion. It focuses on Durkheim's conception of the relation between the cult and the sacred object, on his notion of 'exteriorisation', and on his theory of the social...... symbol in an attempt to describe the peculiar attraction of the fashion object and its social constitution. However, Durkheim's notions of cult and ritual must undergo profound changes if they are to be used in an analysis of fashion. The article tries to expand the Durkheimian cult, radically enlarging...... of the enlargement of the cult into individual behaviour....

  15. Fashion Objects

    DEFF Research Database (Denmark)

    Andersen, Bjørn Schiermer

    2009-01-01

    This article attempts to create a framework for understanding modern fashion phenomena on the basis of Durkheim's sociology of religion. It focuses on Durkheim's conception of the relation between the cult and the sacred object, on his notion of 'exteriorisation', and on his theory of the social...... symbol in an attempt to describe the peculiar attraction of the fashion object and its social constitution. However, Durkheim's notions of cult and ritual must undergo profound changes if they are to be used in an analysis of fashion. The article tries to expand the Durkheimian cult, radically enlarging...... it without totally dispersing it; depicting it as held together exclusively by the sheer 'force' of the sacred object. Firstly, the article introduces the themes and problems surrounding Durkheim's conception of the sacred. Next, it briefly sketches an outline of fashion phenomena in Durkheimian categories...

  16. Post-processing in cardiovascular computed tomography. Performance of a client server solution versus a stand-alone solution

    International Nuclear Information System (INIS)

    Luecke, C.; Foldyna, B.; Andres, C.; Grothoff, M.; Nitzsche, S.; Gutberlet, M.; Lehmkuhl, L.; Boehmer-Lasthaus, S.

    2014-01-01

    Purpose: To compare the performance of server-based (CSS) versus stand-alone post-processing software (ES) for the evaluation of cardiovascular CT examinations (cvCT) and to determine the crucial steps. Data of 40 patients (20 patients for coronary artery evaluation and 20 patients prior to transcatheter aortic valve implantation [TAVI]) were evaluated by 5 radiologists with CSS and ES. Data acquisition was performed using a dual-source 128-row CT unit (SOMATOM Definition Flash, Siemens, Erlangen, Germany) and a 64-row CT unit (Brilliance 64, Philips, Hamburg, Germany). The following workflow was evaluated: Data loading, aorta and coronary segmentation, curved multiplanar reconstruction (cMPR) and 3 D volume rendering technique (3D-VRT), measuring of coronary artery stenosis and planimetry of the aortic annulus. The time requirement and subjective quality for the workflow were evaluated. The coronary arteries as well as the TAVI data could be evaluated significantly faster with CSS (5.5 ± 2.9 min and 8.2 ± 4.0 min, respectively) than with ES (13.9 ± 5.2 min and 15.2 ± 10.9 min, respectively, p = 0.01). Segmentation of the aorta (CSS: 1.9 ± 2.0 min, ES: 3.7 ± 3.3 min), generating cMPR of coronaries (CSS: 0.5 ± 0.2 min, ES: 5.1 ± 2.6 min), aorta and iliac vessels (CSS: 0.5 ± 0.4 min and 0.4 ± 0.4 min, respectively, ES: 1.6 ± 0.7 min and 2.8 ± 3 min, respectively) could be performed significantly faster with CSS than with ES with higher quality of cMPR, measuring of coronary stenosis and 3D-VRT (p < 0.05). Evaluation of cvCT can be accomplished significantly faster and better with CSS than with ES. The segmentation remains the most time-consuming workflow step, so optimization of segmentation algorithms could improve performance even further.

  17. An efficient sizing method for a stand-alone PV system in terms of the observed block extremes

    International Nuclear Information System (INIS)

    Chen, Shin-Guang

    2012-01-01

    Highlights: ► A fast optimal sizing method under climate change. ► It provides the method of creating climate cycles for PV system applications. ► It proposes a new reliability indicator to denote the upper bound probability of a PV application. ► It presents a premiere economic optimization for such approach. ► It gives examples to illustrate the proposed approach. -- Abstract: This paper proposes a novel and fast sizing method under the constant daily load profile for sizing a stand-alone PV system. The term “efficient sizing” means that the approach did not use simulation but could get the result as good as those employing simulation. So, the sizing method is more efficient than the others. Traditionally, a typical day or a typical year’s solar irradiation profile is employed for the sizing task. However, facing the global warming crisis as well as the fact that no 2 years would have the same weather condition for a single site, this approach statistically models the trend of climate change year by year and put it into the sizing formula, so that the results are optimal for the current weather condition and for the future as well. Hence, the suitable size for the PV array and the number of batteries are obtained by purely computation. This is different from the traditional sizing curve method. Although the traditional sizing curve method were satisfactory in the normal cases, they might fail in the extreme climate condition. This paper concludes the behavior of the extreme climate for at least 20 years. So, the derived system may have statistical confidence for at least 20 years of operation. A new reliability index (Loss of Power Probability) in terms of Extreme Value Theory is introduced. LPP provides upper bound reliability for application and rich information for many extreme events. A technological and economical comparison among the traditional daily energy balance method, sizing curve method and this approach is conducted and shows the

  18. Post-processing in cardiovascular computed tomography: performance of a client server solution versus a stand-alone solution.

    Science.gov (United States)

    Lücke, C; Foldyna, B; Andres, C; Boehmer-Lasthaus, S; Grothoff, M; Nitzsche, S; Gutberlet, M; Lehmkuhl, L

    2014-12-01

    To compare the performance of server-based (CSS) versus stand-alone post-processing software (ES) for the evaluation of cardiovascular CT examinations (cvCT) and to determine the crucial steps. Data of 40 patients (20 patients for coronary artery evaluation and 20 patients prior to transcatheter aortic valve implantation [TAVI]) were evaluated by 5 radiologists with CSS and ES. Data acquisition was performed using a dual-source 128-row CT unit (SOMATOM Definition Flash, Siemens, Erlangen, Germany) and a 64-row CT unit (Brilliance 64, Philips, Hamburg, Germany). The following workflow was evaluated: Data loading, aorta and coronary segmentation, curved multiplanar reconstruction (cMPR) and 3 D volume rendering technique (3D-VRT), measuring of coronary artery stenosis and planimetry of the aortic annulus. The time requirement and subjective quality for the workflow were evaluated. The coronary arteries as well as the TAVI data could be evaluated significantly faster with CSS (5.5  ±  2.9  min and 8.2  ±  4.0  min, respectively) than with ES (13.9  ±  5.2  min and 15.2  ±  10.9  min, respectively, p ≤  0.01). Segmentation of the aorta (CSS: 1.9 ±  2.0  min, ES: 3.7  ±  3.3  min), generating cMPR of coronaries (CSS: 0.5  ±  0.2  min, ES: 5.1  ±  2.6  min), aorta and iliac vessels (CSS: 0.5  ±  0.4  min and 0.4  ±  0.4  min, respectively, ES: 1.6  ±  0.7  min and 2.8  ±  3  min, respectively) could be performed significantly faster with CSS than with ES with higher quality of cMPR, measuring of coronary stenosis and 3D-VRT (p < 0.05). Evaluation of cvCT can be accomplished significantly faster and better with CSS than with ES.  The segmentation remains the most time-consuming workflow step, so optimization of segmentation algorithms could improve performance even further. © Georg Thieme Verlag KG Stuttgart · New York.

  19. A compact seven switches topology and reduced DC-link capacitor size for single-phase stand-alone PV system with hybrid energy storages

    DEFF Research Database (Denmark)

    Liu, Xiong; Wang, Peng; Loh, Poh Chiang

    2011-01-01

    Single-phase stand-alone PV system is suitable for household applications in remote area. Hybrid battery/ultra-capacitor energy storage can reduce charge and discharge cycles and avoid deep discharges of battery. This paper proposes a compact seven switches structure for stand-alone PV system......-order harmonic current caused by single-phase inverter. In the proposed compact topology, a small size DC-link capacitor can achieve the same function through charging/discharging control of ultra-capacitor to mitigate second-order ripple current. Simulation results are provided to validate the effectiveness......, which otherwise needs nine switches configuration, inclusive of one switch for boost converter, four switches for single-phase inverter and four switches for two DC/DC converters of battery and ultra-capacitor. It is well-known that a bulky DC-link capacitor is always required to absorb second...

  20. Is Stand-Alone Anterior Lumbar Interbody Fusion a Safe and Efficacious Treatment for Isthmic Spondylolisthesis of L5-S1?

    OpenAIRE

    Viglione, Luke L.; Chamoli, Uphar; Diwan, Ashish D.

    2017-01-01

    Study Design: A systematic review. Objective: The objective of this study was to determine the safety and efficacy of stand-alone anterior lumbar interbody fusion (sa-ALIF) for the treatment of symptomatic isthmic spondylolisthesis of L5-S1 by assessing the level of available clinical and radiographic evidence. Methods: A systematic review utilizing Medline, Embase, and Scopus online databases was undertaken. Clinical, radiographic, and adverse outcome data were extracted for the relevant ist...

  1. Standing with electrical stimulation and splinting is no better than standing alone for management of ankle plantarflexion contractures in people with traumatic brain injury: a randomised trial

    Directory of Open Access Journals (Sweden)

    Joan Leung

    2014-12-01

    Full Text Available Question: Is a combination of standing, electrical stimulation and splinting more effective than standing alone for the management of ankle contractures after severe brain injury? Design: A multi-centre randomised trial with concealed allocation, assessor blinding and intention-to-treat analysis. Participants: Thirty-six adults with severe traumatic brain injury and ankle plantarflexion contractures. Intervention: All participants underwent a 6-week program. The experimental group received tilt table standing, electrical stimulation and ankle splinting. The control group received tilt table standing alone. Outcome measures: The primary outcome was passive ankle dorsiflexion with a 12 Nm torque. Secondary outcomes included: passive dorsiflexion with lower torques (3, 5, 7 and 9 Nm; spasticity; the walking item of the Functional Independence Measure; walking speed; global perceived effect of treatment; and perceived treatment credibility. Outcome measures were taken at baseline (Week 0, end of intervention (Week 6, and follow-up (Week 10. Results: The mean between-group differences (95% CI for passive ankle dorsiflexion at Week 6 and Week 10 were –3 degrees (–8 to 2 and –1 degrees (–6 to 4, respectively, in favour of the control group. There was a small mean reduction of 1 point in spasticity at Week 6 (95% CI 0.1 to 1.8 in favour of the experimental group, but this effect disappeared at Week 10. There were no differences for other secondary outcome measures except the physiotherapists’ perceived treatment credibility. Conclusion: Tilt table standing with electrical stimulation and splinting is not better than tilt table standing alone for the management of ankle contractures after severe brain injury. Trial registration: ACTRN12608000637347. [Leung J, Harvey LA, Moseley AM, Whiteside B, Simpson M, Stroud K (2014 Standing with electrical stimulation and splinting is no better than standing alone for management of ankle plantarflexion

  2. A comparative sizing analysis of a renewable energy supplied stand-alone house considering both demand side and source side dynamics

    International Nuclear Information System (INIS)

    Elma, Onur; Selamogullari, Ugur Savas

    2012-01-01

    Highlights: ► Backup sizing analyses for PV–Wind energy supplied stand-alone house are completed. ► Source and demand side dynamics are considered for the first time in backup sizing. ► Backup size is reduced by 10% compared to backup size found with hourly values. ► The importance of data resolution on sizing study in such systems is shown. -- Abstract: Solar and wind energy use to supply the electrical demand of a stand-alone residential house is investigated. Combining solar and wind energy sources provide more reliable power source for stand-alone applications since they complement each other. Backup units (battery/supercapacitor) are also needed for uninterrupted energy. For a proper backup sizing in such systems, high resolution load data, wind speed and solar radiation data must be used as compared to the use of hourly averaged data found in literature. In this study, high resolution data on both load side and source side are collected experimentally. Then, collected data used as input to system simulations in Matlab/Simulink for sizing the backup in the considered hybrid power system. Backup state of the charge (SOC) is used as decision criteria. It is shown that, when load and source dynamics are considered, approximately 10% less backup size is required compared to backup size found with hourly averaged values. The study shows the importance of data resolution on backup sizing in such systems and could be a guide for renewable energy system designers.

  3. Supervisory control applied to stand-alone photovoltaic systems based on multi string topology; Controle supervisorio aplicado a sistemas fotovoltaicos autonomos com topologia multi string

    Energy Technology Data Exchange (ETDEWEB)

    Candido, Diogo Brum

    2010-07-01

    This master thesis analyses and implements a stand-alone photovoltaic system based on decentralized 'Multi String' topology. The proposed system is composed of a set of DC-DC converters linked to the PV arrays of panels, a bidirectional converter to perform the control of the charge/discharge process of the battery bank and ensure the specifications of DC link and a full-bridge inverter that feed the AC loads. Therefore, all operation modes that the stand-alone PV system can work are presented and analyzed. As the chief aim is to ensure the energy balance of the stand-alone PV system, are presented independents control loops for each converter of the PV system and a propose of a supervisory control that, based on information about the conditions of the DC link and the bank of batteries, defines each operation mode should be active, in order to maximize the power extracted from the PV arrays, the life cycle of the battery bank and ensuring the uninterrupted feeding of energy to the loads. Finally, simulation and experimental results validate the operation of the proposed system under different load and solar radiation conditions. (author)

  4. Anterior cervical discectomy and fusion using a stand-alone polyetheretherketone cage packed with local autobone : assessment of bone fusion and subsidence.

    Science.gov (United States)

    Park, Jeong-Ill; Cho, Dae-Chul; Kim, Kyoung-Tae; Sung, Joo-Kyung

    2013-09-01

    It remains debatable whether cervical spine fusion cages should be filled with any kind of bone or bone substitute. Cortical and subcortical bone from the anterior and posterior osteophytes of the segment could be used to fill the cage. The purposes of the present study are to evaluate the clinical outcomes and radiological outcomes including bone fusion and subsidence that occurred after anterior cervical discectomy and fusion using a stand-alone cage packed with local autobone graft. Thirty-one patients who underwent anterior cervical fusion using a stand-alone polyetheretherketone (PEEK) cage packed with local autobone graft from July 2009 to december 2011 were enrolled in this study. Bone fusion was assessed by cervical plain radiographs and computed tomographic scan. Nonunion was evaluated according to the absence of bony bridge on computed tomographic scan. Subsidence was defined as a ≥2 mm decrease of the interbody height at the final follow-up compared to that measured at the immediate postoperative period. Subsidence was observed in 7 patients (22.6%). Of 7 patients with subsidence greater 2 mm, nonunion was developed in 3. Three patients with subsidence greater 2 mm were related with endplate damage during intraoperative endplate preparation. Solid bone fusion was achieved in 28 out of 31 patients (90.3%). With proper patient selection and careful endplate preparation, anterior cervical discectomy and fusion (ACDF) using a stand-alone PEEK cage packed with local autobone graft could be a good alternative to the standard ACDF techniques with plating.

  5. Fracture of the L-4 vertebral body after use of a stand-alone interbody fusion device in degenerative spondylolisthesis for anterior L3-4 fixation.

    Science.gov (United States)

    Kwon, Yoon-Kwang; Jang, Ju-Hee; Lee, Choon-Dae; Lee, Sang-Ho

    2014-06-01

    Many studies attest to the excellent results achieved using anterior lumbar interbody fusion (ALIF) for degenerative spondylolisthesis. The purpose of this report is to document a rare instance of L-4 vertebral body fracture following use of a stand-alone interbody fusion device for L3-4 ALIF. The patient, a 55-year-old man, had suffered intractable pain of the back, right buttock, and left leg for several weeks. Initial radiographs showed Grade I degenerative spondylolisthesis, with instability in the sagittal plane (upon 15° rotation) and stenosis of central and both lateral recesses at the L3-4 level. Anterior lumbar interbody fusion of the affected vertebrae was subsequently conducted using a stand-alone cage/plate system. Postoperatively, the severity of spondylolisthesis diminished, with resolution of symptoms. However, the patient returned 2 months later with both leg weakness and back pain. Plain radiographs and CT indicated device failure due to anterior fracture of the L-4 vertebral body, and the spondylolisthesis had recurred. At this point, bilateral facetectomies were performed, with reduction/fixation of L3-4 by pedicle screws. Again, degenerative spondylolisthesis improved postsurgically and symptoms eased, with eventual healing of the vertebral body fracture. This report documents a rare instance of L-4 vertebral body fracture following use of a stand-alone device for ALIF at L3-4, likely as a consequence of angular instability in degenerative spondylolisthesis. Under such conditions, additional pedicle screw fixation is advised.

  6. Performance of a small stand alone photovoltaic-wind system at El Oyameyo D.F., Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Juarez, A.; Campos, J. [Centro de Investigacion en Energia, UNAM, Mexico, D. F. (Mexico); Tiburcio Silver, A. [Instituto Tecnologico de Toluca-Division de Posgrado, Toluca (Mexico)

    1997-12-31

    El Oyameyo, is an ecological site located to the South-West of the Topilejo town, D.F., 19 degree 25` North latitude, 99 degree 5` West longitude and at an altitude of 3100 m. At present, there are 10 families living at this place. They have energy generators to produce their own electricity by means of solar or wind energy using photovoltaic (PV) technology and eolic systems, respectively. There are three different configurations of energy generators: DC regulated PV systems, AC regulated PV systems and one PV-Wind hybrid system. The electrical power installed for the stand alone PV systems are from 48 W-p up to 768 W-p range. Among these, there are 4 PV systems that are configurated in DC regulated systems, and other 6 are AC regulated systems. All these systems use lead-acid battery (scaled or vented) banks to store the energy produced daily by the systems. The PV-Wind hybrid system in formed, at present, by a 5.0 kW wind generator, a PV array of 768 W-p, a 37.8 kW-h storage battery bank and a 5.0 kW DC/AC inverter. In this work, we report the electricity generated, load pattern and overall system performance of the photovoltaic-wind hybrid system. The technical characteristics, energy test on the hybrid system and the experience obtained from energy handling and system maintenance for all the systems are presented. We found that all the systems had shown good performance and users` satisfaction. [Espanol] El Oyameyo es un lugar ecologico localizado al Sur-Oeste del pueblo de Topilejo, D. F., 19 grados 25` de latitud Norte 99 grados 5` de longitud Oeste y a una altitud de 3100m. Actualmente hay 10 familias viviendo en este lugar. Tienen generadores de energia para producir su propia electricidad mediante la energia solar y la del viento usando sistemas fotovoltaicos (FV) y sistemas eolicos, respectivamente. Hay tres diferentes configuraciones de generadores de energia: sistemas fotovoltaicos de CD regulados, sistemas fotovoltaicos de CA regulados y un sistema

  7. JChainsAnalyser: an ImageJ-based stand-alone application for the study of magneto-rheological fluids

    Science.gov (United States)

    Domínguez-García, P.; Rubio, M. A.

    2009-10-01

    JChainsAnalyser is a Java-based program for the analysis of two-dimensional images of magneto-rheological fluids (MRF) at low concentration of particles obtained using the video-microscopy technique. MRF are colloidal dispersions of micron-sized polarizable particles in a carrier fluid with medium to low viscosity. When a magnetic field is applied to the suspension, the particles aggregate forming chains or clusters. Aggregation dynamics [P. Domínguez-García, S. Melle, J.M. Pastor, M.A. Rubio, Phys. Rev. E 76 (2007) 051403] and morphology of the aggregates [P. Domínguez-García, S. Melle, M.A. Rubio, J. Colloid Interface Sci. 333 (2009) 221-229] have been studied capturing images of the fluid and analyzing them by using this software. The program allows to analyze automatically the MRF images by means of an adequate combination of different imaging methods, while magnitudes and statistics are calculated and saved in data files. It is possible to run the program on a desktop computer, using the GUI (graphical user interface), or in a cluster of processors or remote computer by means of command-line instructions. Program summaryProgram title: JChainsAnalyser Catalogue identifier: AEDT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 79 071 No. of bytes in distributed program, including test data, etc.: 4 367 909 Distribution format: tar.gz Programming language: Java 2 Computer: Any computer with Java Runtime Environment (JRE) installed Operating system: Any OS with Java Runtime Environment (JRE) installed RAM: Typically, 3.3 MB Classification: 23 External routines: ImageJ, ij-imageIO, jdom, L2FProd Nature of problem: The video-microscopy technique usually produces quite a big quantity of images to analyze

  8. Desktop Computing Integration Project

    Science.gov (United States)

    Tureman, Robert L., Jr.

    1992-01-01

    The Desktop Computing Integration Project for the Human Resources Management Division (HRMD) of LaRC was designed to help division personnel use personal computing resources to perform job tasks. The three goals of the project were to involve HRMD personnel in desktop computing, link mainframe data to desktop capabilities, and to estimate training needs for the division. The project resulted in increased usage of personal computers by Awards specialists, an increased awareness of LaRC resources to help perform tasks, and personal computer output that was used in presentation of information to center personnel. In addition, the necessary skills for HRMD personal computer users were identified. The Awards Office was chosen for the project because of the consistency of their data requests and the desire of employees in that area to use the personal computer.

  9. Outcomes of contemporary use of rectangular titanium stand-alone cages in anterior cervical discectomy and fusion: cage subsidence and cervical alignment.

    Science.gov (United States)

    Yamagata, Toru; Takami, Toshihiro; Uda, Takehiro; Ikeda, Hidetoshi; Nagata, Takashi; Sakamoto, Shinichi; Tsuyuguchi, Naohiro; Ohata, Kenji

    2012-12-01

    Cervical intervertebral disc replacement using a rectangular titanium stand-alone cage has become a standard procedure for anterior cervical discectomy and fusion (ACDF). We examined outcomes resulting from the contemporary use of rectangular titanium stand-alone cages for ACDF, particularly focusing on cage subsidence and subsequent kyphotic malalignment. Patient data were collected prospectively, and a total of 47 consecutive patients who underwent periodic follow-up of at least 1 year's duration after ACDF were studied retrospectively. Sixty-three rectangular titanium cages were implanted during 31 1-level and 16 2-level procedures. None of the patients developed surgery-related complications (including cage displacement or extrusion). Mean Neurosurgical Cervical Spine Scale scores were significantly improved at 1 year after surgery. Twelve of the 63 inserted cages (19.0%) were found to have cage subsidence, occurring in 11 of 47 patients (23.4%). There was no significant difference in functional recovery between patients with and without cage subsidence. Logistic regression analysis indicated that fusion level, cage size and cage position were significantly related to cage subsidence. The distraction ratio among patients with cage subsidence was significantly higher than that among patients without cage subsidence. Cage subsidence resulted in early deterioration of local angle and total alignment of the cervical spine. Although a longer follow-up is warranted, a good surgical outcome with negligible complications appears to justify the use of rectangular titanium stand-alone cages in 1- and 2-level ACDF. Excessive distraction at the fusion level should be avoided, and cage position should be adjusted to the anterior vertical line. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Fusion and subsidence rate of stand alone anterior lumbar interbody fusion using PEEK cage with recombinant human bone morphogenetic protein-2.

    Science.gov (United States)

    Behrbalk, Eyal; Uri, Ofir; Parks, Ruth M; Musson, Rachel; Soh, Reuben Chee Cheong; Boszczyk, Bronek Maximilian

    2013-12-01

    Anterior lumbar interbody fusion (ALIF) is an established treatment for structural instability associated with symptomatic disk degeneration (SDD). Stand-alone ALIF offers many advantages, however, it may increase the risk of non-union. Recombinant human bone morphogenetic protein-2 (BMP-2) may enhance fusion rate but is associated with postoperative complication. The optimal dose of BMP-2 remains unclear. This study assessed the fusion and subsidence rates of stand-alone ALIF using the SynFix-LR interbody cage with 6 ml/level of BMP-2. Thirty-two ALIF procedures were performed by a single surgeon in 25 patients. Twenty-five procedures were performed for SDD without spondylolisthesis (SDD group) and seven procedures were performed for SDD with grade-I olisthesis (SDD-olisthesis group). Patients were followed-up for a mean of 17 ± 6 months. Solid fusion was achieved in 29 cases (90.6 %) within 6 months postoperatively. Five cases of implant subsidence were observed (16 %). Four of these occurred in the SDD-olisthesis group and one occurred in the SDD group (57 % vs. 4 % respectively; p = 0.004). Three cases of subsidence failed to fuse and required revision. The body mass index of patients with olisthesis who developed subsidence was higher than those who did not develop subsidence (29 ± 2.6 vs. 22 ± 6.5 respectively; p = 0.04). No BMP-2 related complications occurred. The overall fusion rate of stand-alone ALIF using the SynFix-LR system with BMP-2 was 90.6 %, comparable with other published series. No BMP-2 related complication occurred at a dose of 6 mg/level. Degenerative spondylolisthesis and obesity seemed to increase the rate of implant subsidence, and thus we believe that adding posterior fusion for these cases should be considered.

  11. Segmental kyphosis after cervical interbody fusion with stand-alone polyetheretherketone (PEEK) cages: a comparative study on 2 different PEEK cages.

    Science.gov (United States)

    Kim, Chi Heon; Chung, Chun Kee; Jahng, Tae-Ahn; Park, Sung Bae; Sohn, Seil; Lee, Sungjoon

    2015-02-01

    Retrospective comparative study. Two polyetheretherketone (PEEK) cages of different designs were compared in terms of the postoperative segmental kyphosis after anterior cervical discectomy and fusion. Segmental kyphosis occasionally occurs after the use of a stand-alone cage for anterior cervical discectomy and fusion. Although PEEK material seems to have less risk of segmental kyphosis compared with other materials, the occurrence of segmental kyphosis for PEEK cages has been reported to be from 0% to 29%. There have been a few reports that addressed the issue of PEEK cage design. A total of 41 consecutive patients who underwent single-level anterior discectomy and fusion with a stand-alone cage were included. Either a round tube-type (Solis; 18 patients, S-group) or a trapezoidal tube-type (MC+; 23 patients, M-group) cage was used. The contact area between the cage and the vertebral body is larger in MC+ than in Solis, and anchoring pins were present in the Solis cage. The effect of the cage type on the segmental angle (SA) (lordosis vs. kyphosis) at postoperative month 24 was analyzed. Preoperatively, segmental lordosis was present in 12/18 S-group and 16/23 M-group patients (P=0.84). The SA was more lordotic than the preoperative angle in both groups just after surgery, with no difference between groups (P=0.39). At 24 months, segmental lordosis was observed in 9/18 S-group and 20/23 M-group patients (P=0.01). The patients in M-group were 7.83 times more likely than patients in S-group (P=0.04; odds ratio, 7.83; 95% confidence interval, 1.09-56.28) not to develop segmental kyphosis. The design of the PEEK cage used may influence the SA, and this association needs to be considered when using stand-alone PEEK cages.

  12. Clinician's perspectives of the relocation of a regional child and adolescent mental health service from co-located to stand alone premises.

    Science.gov (United States)

    Francis, K J; Boyd, C P; Sewell, J; Nurse, S

    2008-01-01

    Australia's National Mental Health Strategy's statement of rights and responsibilities states that children and adolescents admitted to a mental health facility or community program have the right to be separated from adult patients and provided with programs suited to their developmental needs. However, in rural Australia, where a lack of healthcare services, financial constraints, greater service delivery areas and fewer mental healthcare specialists represent the norm, Child and Adolescent Mental Health Services (CAMHS) are sometimes co-located with adult mental health services. The aim of the present study was to evaluate the impact of a recent relocation of a regional CAMHS in Victoria from co-located to stand alone premises. Six CAMHS clinicians who had experienced service delivery at a co-located setting and the current stand-alone CAMHS setting were interviewed about their perceptions of the impact of the relocation on service delivery. An exploratory interviewing methodology was utilized due to the lack of previous research in this area. Interview data were transcribed and analysed according to interpretative phenomenological analysis techniques. Findings indicated a perception that the relocation was positive for clients due to the family-friendly environment at the new setting and separation of CAMHS from adult psychiatric services. However, the impact of the relocation on clinicians was marked by a perceived loss of social capital from adult psychiatric service clinicians. These results provide increased understanding of the effects of service relocation and the influence of co-located versus stand-alone settings on mental health service delivery - an area where little prior research exists.

  13. Single anterior cervical discectomy and fusion (ACDF) using self- locking stand-alone polyetheretherketone (PEEK) cage: evaluation of pain and health-related quality of life.

    Science.gov (United States)

    Kapetanakis, Stylianos; Thomaidis, Tryfon; Charitoudis, George; Pavlidis, Pavlos; Theodosiadis, Panagiotis; Gkasdaris, Grigorios

    2017-09-01

    Anterior cervical discectomy and fusion (ACDF) constitutes the conventional treatment of cervical disc herniation due to degenerative disc disease (DDD). ACDF with plating presents a variety of complications postoperatively and stand-alone cages are thought to be a promising alternative. The aim of this study was firstly, to analyze prospectively collected data from a sample of patients treated with single ACDF using C-Plus self-locking stand-alone PEEK cage system, without the use of plates or screws, in order to evaluate pain levels of patients, utilizing Neck and Arm Pain scale as an expression of visual analogue scale (VAS). Secondly, we aimed to evaluate health-related quality of life, via the short-form 36 (SF-36) and Neck Disability Index (NDI). Thirty-six patients (19 male and 17 female) with mean age 49.6±7 years old who underwent successful single ACDF using self-locking stand-alone PEEK cage for symptomatic cervical DDD were selected for the study. Neck and Arm pain, as well as SF-36 and NDI were estimated preoperatively and 1, 3, 6, and 12 months postoperatively. Patients underwent preoperative and postoperative clinical, neurological and radiological evaluation. The clinical and radiological outcomes were satisfactory after a minimum 1-year follow-up. All results were statistically important (P<0.05), excluding improvement in NDI measured between 6 and 12 months. SF-36, Neck Pain, as well as Arm Pain featured gradual and constant improvement during follow-up, with best scores presenting at 12 months after surgery, while NDI reached its best at 6 months postoperatively. Generally, all scores showed improvement postoperatively during the different phases of the follow-up. Subsequently, ACDF using C-Plus cervical cage constitutes an effective method for cervical disc herniation treatment, in terms of postoperative improvement on pain levels and health-related quality of life and a safe alternative to the conventional method of treatment for cervical DDD.

  14. Techno-economic assessment of FT unit for synthetic diesel production in existing stand-alone biomass gasification plant using process simulation tool

    DEFF Research Database (Denmark)

    Hunpinyo, Piyapong; Narataruksa, Phavanee; Tungkamani, Sabaithip

    2014-01-01

    such as Fischer-Tropsch (FT) diesel. The embedding of the FT plant into the stand-alone based on power mode plants for production of a synthetic fuel is a promising practice, which requires an extensive adaptation of conventional techniques to the special chemical needs found in a gasified biomass. Because...... there are currently no plans to engage the FT process in Thailand, the authors have targeted that this work focus on improving the FT configurations in existing biomass gasification facilities (10 MWth). A process simulation model for calculating extended unit operations in a demonstrative context is designed...

  15. Effect of State Feedback Coupling and System Delays on the Transient Performance of Stand-Alone VSI with LC Output Filter

    DEFF Research Database (Denmark)

    Federico, de Bosio; de Sousa Ribeiro, Luiz Antonio; Freijedo Fernandez, Francisco Daniel

    2016-01-01

    The influence of state feedback coupling in the dynamics performance of power converters for stand-alone microgrids is investigated. Computation and PWM delays are the main factors that limit the achievable bandwidth of current regulators in digital implementations. In particular, the performance...... provided. A proportional resonant voltage controller is designed according to Nyquist criterion taking into account application requirements. For this purpose, a mathematical expression based on root locus analysis is proposed to find the minimum value of the fundamental resonant gain. Experimental tests...

  16. DCE-MRI of the breast in a stand-alone setting outside a complementary strategy - results of the TK-study

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Clemens G.; Krammer, J.; Wasser, K.; Schoenberg, S.O. [University Medical Centre Mannheim, Medical Faculty Mannheim-University of Heidelberg, Institute of Clinical Radiology and Nuclear Medicine, Mannheim (Germany); Reich, C.; Kaiser, W.A. [Friedrich-Schiller-University Hospital Jena, Institute of Diagnostic and Interventional Radiology I, Jena (Germany); Dietzel, M. [Friedrich-Alexander-University Hospital Erlangen-Nuernberg, Department of Neuroradiology, Erlangen (Germany); Baltzer, P.A.T. [Medical University Vienna, Institute of Radiology and Nuclear Medicine, Vienna (Austria)

    2015-06-01

    To evaluate the accuracy of MRI of the breast (DCE-MRI) in a stand-alone setting with extended indications. According to the inclusion criteria, breast specialists were invited to refer patients to our institution for DCE-MRI. Depending on the MR findings, patients received either a follow-up or biopsy. Between 04/2006 and 12/2011 a consecutive total of 1,488 women were prospectively examined. Of 1,488 included patients, 393 patients were lost to follow-up, 1,095 patients were evaluated. 124 patients were diagnosed with malignancy by DCE-MRI (76 TP, 48 FP, 971 TN, 0 FN cases). Positive cases were confirmed by histology, negative cases by MR follow-ups or patient questionnaires over the next 5 years in 1,737 cases (sensitivity 100 %; specificity 95.2 %; PPV 61.3 %; NPV 100 %; accuracy 95.5 %). For invasive cancers only (DCIS excluded), the results were 63 TP; 27 FP; 971 TP and 0 FN (sensitivity 100 %; specificity 97.2 %; PPV 70 %; NPV 100 %; accuracy 97.5 %). The DCE-MRI indications tested imply that negative results in DCE-MRI reliably exclude cancer. The results were achieved in a stand-alone setting (single modality diagnosis). However, these results are strongly dependent on reader experience and adequate technical standards as prerequisites for optimal diagnoses. (orig.)

  17. Risk factors for subsidence in anterior cervical fusion with stand-alone polyetheretherketone (PEEK) cages: a review of 82 cases and 182 levels.

    Science.gov (United States)

    Kao, Ting-Hsien; Wu, Chen-Hao; Chou, Yu-Ching; Chen, Hsien-Te; Chen, Wen-Hsien; Tsou, Hsi-Kai

    2014-10-01

    To determine risk factors for subsidence in patients treated with anterior cervical discectomy and fusion (ACDF) and stand-alone polyetheretherketone (PEEK) cages. Records of patients with degenerative spondylosis or traumatic disc herniation resulting in radiculopathy or myelopathy between C2 and C7 who underwent ACDF with stand-alone PEEK cages were retrospectively reviewed. Cages were filled with autogenous cancellous bone harvested from iliac crest or hydroxyapatite. Subsidence was defined as a decrease of 3 mm or more of anterior or posterior disc height from that measured on the postoperative radiograph. Eighty-two patients (32 males, 50 females; 182 treatment levels) were included in the analysis. Most patients had 1-2 treatment levels (62.2 %), and 37.8 % had 3-4 treatment levels. Treatment levels were from C2-7. Of the 82 patients, cage subsidence occurred in 31 patients, and at 39 treatment levels. Multivariable analysis showed that subsidence was more likely to occur in patients with more than two treatment levels, and more likely to occur at treatment levels C5-7 than at levels C2-5. Subsidence was not associated with postoperative alignment change but associated with more disc height change (relatively oversized cage). Subsidence is associated with a greater number of treatment levels, treatment at C5-7 and relatively oversized cage use.

  18. [Biomechanicsl evaluation of a stand-alone interbody fusion cage based on porous TiO2/glass-ceramic on the human cervical spine].

    Science.gov (United States)

    Korinth, M C; Moersch, S; Ragoss, C; Schopphoff, E

    2003-12-01

    Recently, there has been a rapid increase in the use of cervical spine interbody fusion cages, differing in design and biomaterial used, in competition to autologous iliac bone graft and bone cement (PMMA). Limited biomechanical differences in primary stability, as well as advantages and disadvantages of each cage or material have been investigated in studies, using an in vitro human cervical spine model. 20 human cervical spine specimens were tested after fusion with either a cubical stand-alone interbody fusion cage manufactured from a new porous TiO2/glass composite (Ecopore) or PMMA after discectomy. Non-destructive biomechanical testing was performed, including flexion/extension and lateral bending using a spine testing apparatus. Three-dimensional segmental range of motion (ROM) was evaluated using an ultrasound measurement system. ROM increased more in flexion/extension and lateral bending after PMMA fusion (26.5%/36.1%), then after implantation of the Ecopore-cage (8.1%/7.8%). In this first biomechanical in vitro examination of a new porous ceramic bone replacement material a) the feasibility and reproducibility of biomechanical cadaveric cervical examination and its applicability was demonstrated, b) the stability of the ceramic cage as a stand alone interbody cage was confirmed in vitro, and c) basic information and knowledge for our intended biomechanical and histological in vivo testing, after implantation of Ecopore in cervical sheep spines, were obtained.

  19. Clinical and radiological outcomes after stand-alone ALIF for single L5-S1 degenerative discopathy using a PEEK cage filled with hydroxyapatite nanoparticles without bone graft.

    Science.gov (United States)

    Norotte, Gilles; Barrios, Carlos

    2018-05-01

    Recent improvements in cage designs with integral fixation and screw attachments have made stand-alone ALIF a viable option with several possible advantages. The aim of this study was to confirm the efficacy and safety of a PEEK cage filled with hydroxyapatite nanoparticles without adding a bone graft for stand-alone ALIF in the treatment of L5-S1 isolated degenerative disc discopathy (DDD). Sixty-five patients who required surgery for DDD were evaluated. Clinical outcome evaluations included back and leg pain (VAS), disability (Oswestry Disability Index), and patient satisfaction (Macnab's criteria). Radiological outcomes include the assessment of disc height, the L5-S1 intervertebral disc angle, and anterior intervertebral fusion through standard and functional sagittal X-rays of the lumbar spine. Clinical and radiological measurements were assessed 2, 6, 12, and 24 months after surgery. Clinical outcomes improved progressively and stabilized from 12- to 24-month follow-up. Final postoperative ODI scores showed a notable improvement (95%CI = 36.1-48.9 points; p < .001). Similarly, 24-month postoperative VAS scores revealed a significant decrease in pain (95%CI = 5.4-6.2; p < .001). The fusion rate was 95.4%. Anterior disc height was restored from 4.1 ± 3.2 mm at baseline to 9.5 ± 1.6 mm in the immediate postoperative period (p < .001). A small collapse (17.9%) of the disc height was detected from the 2- and 24-month follow-ups. Cage subsidence (more than 3 mm collapse) was detected in 4 cases (6.2%) and was related to cage size (more than 11 mm height; P < .05). There were no serious bone substitute-related adverse events and no revision surgeries. Stand-alone anterior lumbar interbody fusion using hydroxyapatite nanoparticles without an autologous bone graft is an effective and safe treatment option for L5-S1 degenerative pathology. Clinical outcomes were very satisfactory with a high fusion rate. Copyright © 2018

  20. Solution and crystal structure of BA42, a protein from the Antarctic bacterium Bizionia argentinensis comprised of a stand-alone TPM domain.

    Science.gov (United States)

    Aran, Martin; Smal, Clara; Pellizza, Leonardo; Gallo, Mariana; Otero, Lisandro H; Klinke, Sebastián; Goldbaum, Fernando A; Ithurralde, Esteban R; Bercovich, Andrés; Mac Cormack, Walter P; Turjanski, Adrián G; Cicero, Daniel O

    2014-11-01

    The structure of the BA42 protein belonging to the Antarctic flavobacterium Bizionia argentinensis was determined by nuclear magnetic resonance and X-ray crystallography. This is the first structure of a member of the PF04536 family comprised of a stand-alone TPM domain. The structure reveals a new topological variant of the four β-strands constituting the central β-sheet of the αβα architecture and a double metal binding site stabilizing a pair of crossing loops, not observed in previous structures of proteins belonging to this family. BA42 shows differences in structure and dynamics in the presence or absence of bound metals. The affinity for divalent metal ions is close to that observed in proteins that modulate their activity as a function of metal concentration, anticipating a possible role for BA42. © 2014 Wiley Periodicals, Inc.

  1. Grid parity analysis of stand-alone hybrid microgrids: A comparative study of Germany, Pakistan, South Africa and the United States

    Science.gov (United States)

    Siddiqui, Jawad M.

    Grid parity for alternative energy resources occurs when the cost of electricity generated from the source is lower than or equal to the purchasing price of power from the electricity grid. This thesis aims to quantitatively analyze the evolution of hybrid stand-alone microgrids in the US, Germany, Pakistan and South Africa to determine grid parity for a solar PV/Diesel/Battery hybrid system. The Energy System Model (ESM) and NREL's Hybrid Optimization of Multiple Energy Resources (HOMER) software are used to simulate the microgrid operation and determine a Levelized Cost of Electricity (LCOE) figure for each location. This cost per kWh is then compared with two distinct estimates of future retail electricity prices at each location to determine grid parity points. Analysis results reveal that future estimates of LCOE for such hybrid stand-alone microgrids range within the 35-55 cents/kWh over the 25 year study period. Grid parity occurs earlier in locations with higher power prices or unreliable grids. For Pakistan grid parity is already here, while Germany hits parity between the years 2023-2029. Results for South Africa suggest a parity time range of the years 2040-2045. In the US, places with low grid prices do not hit parity during the study period. Sensitivity analysis results reveal the significant impact of financing and the cost of capital on these grid parity points, particularly in developing markets of Pakistan and South Africa. Overall, the study helps conclude that variations in energy markets may determine the fate of emerging energy technologies like microgrids. However, policy interventions have a significant impact on the final outcome, such as the grid parity in this case. Measures such as eliminating uncertainty in policies and improving financing can help these grids overcome barriers in developing economies, where they may find a greater use much earlier in time.

  2. PR2ALIGN: a stand-alone software program and a web-server for protein sequence alignment using weighted biochemical properties of amino acids.

    Science.gov (United States)

    Kuznetsov, Igor B; McDuffie, Michael

    2015-05-07

    Alignment of amino acid sequences is the main sequence comparison method used in computational molecular biology. The selection of the amino acid substitution matrix best suitable for a given alignment problem is one of the most important decisions the user has to make. In a conventional amino acid substitution matrix all elements are fixed and their values cannot be easily adjusted. Moreover, most existing amino acid substitution matrices account for the average (dis)similarities between amino acid types and do not distinguish the contribution of a specific biochemical property to these (dis)similarities. PR2ALIGN is a stand-alone software program and a web-server that provide the functionality for implementing flexible user-specified alignment scoring functions and aligning pairs of amino acid sequences based on the comparison of the profiles of biochemical properties of these sequences. Unlike the conventional sequence alignment methods that use 20x20 fixed amino acid substitution matrices, PR2ALIGN uses a set of weighted biochemical properties of amino acids to measure the distance between pairs of aligned residues and to find an optimal minimal distance global alignment. The user can provide any number of amino acid properties and specify a weight for each property. The higher the weight for a given property, the more this property affects the final alignment. We show that in many cases the approach implemented in PR2ALIGN produces better quality pair-wise alignments than the conventional matrix-based approach. PR2ALIGN will be helpful for researchers who wish to align amino acid sequences by using flexible user-specified alignment scoring functions based on the biochemical properties of amino acids instead of the amino acid substitution matrix. To the best of the authors' knowledge, there are no existing stand-alone software programs or web-servers analogous to PR2ALIGN. The software is freely available from http://pr2align.rit.albany.edu.

  3. Effects of ozone as a stand-alone and coagulation-aid treatment on the reduction of trihalomethanes precursors from high DOC and hardness water.

    Science.gov (United States)

    Sadrnourmohamadi, Mehrnaz; Gorczyca, Beata

    2015-04-15

    This study investigates the effect of ozone as a stand-alone and coagulation aid on the removal of dissolved organic carbon (DOC) from the water with a high level of DOC (13.8 mgL(-1)) and calcium hardness (270 mgL(-1)) CaCO3. Natural water collected from the Assiniboine River (Manitoba, Canada) was used in this study. Effectiveness of ozone treatment was evaluated by measurement of DOC, DOC fractions, UV254, and trihalomethane formation potential (THMFP). Additionally, zeta potential and dissolved calcium concentration were measured to discern the mechanism of ozone reactions. Results indicated that 0.8 mg O3/mg DOC ozone stand-alone can cause up to 86% UV254 reduction and up to 27% DOC reduction. DOC fractionation results showed that ozone can change the composition of DOC in the water samples, converting the hydrophobic fractions into hydrophilic ones and resulting in the reduction of THMFP. Also, ozone caused a decrease in particle stability and dissolved calcium concentration. These simultaneous ozonation effects caused improved water flocculation and enhanced removal of DOC. This resulted in reduction of the coagulant dosage when ozone doses higher than 0.2 mg O3/mg DOC were applied prior to coagulation with ferric sulfate. Also, pre-ozonation-coagulation process achieved preferential THMFP removal for all of the ozone doses tested (0-0.8 mg O3/mg DOC), leading to a lower specific THMFP in pre-ozonated-coagulated waters than in the corresponding ozonated waters. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Analysis of the impact of batteries behaviour on stand-alone photovoltaic systems; Analise do impacto do comportamento de baterias em sistemas fotovoltaicos autonomos

    Energy Technology Data Exchange (ETDEWEB)

    Vera, Luis Horacio

    2009-08-15

    Stand-alone photovoltaic systems are a suitable alternative for rural electrification. However, there are still problems to be solved, mainly related to the system design and the technical quality of the equipment and facilities, which impacts the systems reliability. To determine the factors that affect the reliability of these systems it were studied the most common configurations and associated failures. The Laboratory experimental research, together with an extensive literature review, show the basic technical problems that occur to each of the elements of the installation and the dependence between them. These studies have shown that the storage the system, considering system reliability and economy, is the weakest element due to the decrease of their storage capacity. This led to consider the storage systems as the focus of this study and, through the analysis of their behavior, to develop a procedure to size systems with high reliability, lower cost and appropriate configuration. The impact of batteries on the technical reliability and economic viability of photovoltaic systems is determined. It was achieved through experimental testing and the development and adjustment of mathematical models. These models were implemented to preexisting software called PVSize. The improved software allows the calculation of different configurations of systems and to determine the loss of load probability and the figures of merit associated to the chosen economic-financial project. On this work was installed a photovoltaic system and was developed a battery testing system. The values measured in these systems allow to verify the mathematical models that describe the behavior of each device and characterize the components of the system. Experimental analysis of the behavior of a bank of batteries along a year showed that the connection of batteries in parallel accelerates the batteries degradation process, and this degradation has differentiated impact on the loss of

  5. A practical multi-objective design approach for optimum exhaust heat recovery from hybrid stand-alone PV-diesel power systems

    International Nuclear Information System (INIS)

    Yousefi, Moslem; Kim, Joong Hoon; Hooshyar, Danial; Yousefi, Milad; Sahari, Khairul Salleh Mohamed; Ahmad, Rodina Binti

    2017-01-01

    Highlights: • Heat recovery exchanger is designed based on practical conditions of a hybrid power system. • Off-the-grid electricity system modeling and analysis using micro-grid analysis software HOMER. • NSGA-II is used for the multi-objective design optimization task. • A new local search is proposed to incorporate the engineering knowledge in NSGA-II. • The proposed approach outperforms the existing ones. - Abstract: Integration of solar power and diesel generators (DGs) together with battery storage has proven to be an efficient choice for stand-alone power systems (SAPS). For higher energy efficiency, heat recovery from exhaust gas of the DG can also be employed to supply all or a portion of the thermal energy demand. Although the design of such heat recovery systems (HRSs) has been studied, the effect of solar power integration has not been taken into account. In this paper, a new approach for practical design of these systems based on varying engine loads is presented. Fast and elitist non-dominated sorting genetic algorithm (NSGA-II) equipped with a novel local search was used for the design process, considering conflicting objectives of annual energy recovery and total cost of the system, and six design variables. An integrated power system, designed for a remote SAPS, was used to evaluate the design approach. The optimum power supply system was first designed using the commercial software Hybrid Optimization of Multiple Energy Resources (HOMER), based on power demand and global solar energy in the region. Heat recovery design was based on the outcome of HOMER for DG hourly load, considering different power scenarios. The proposed approach improves the annual heat recovery of the PV/DG/battery system by 4%, PV/battery by 1.7%, and stand-alone DG by 1.8% when compared with a conventional design based on nominal DG load. The results prove that the proposed approach is effective and that load calculations should be taken into account prior to

  6. Fatigue monitoring desktop guide

    International Nuclear Information System (INIS)

    Woods, K.; Thomas, K.

    2012-01-01

    The development of a program for managing material aging (MMG) in the nuclear industry requires a new and different perspective. The classical method for MMG is cycle counting, which has been shown to have limited success. The classical method has been successful in satisfying the ductile condition per the America Society of Mechanical Engineers' (ASME) design criteria. However, the defined material failure mechanism has transformed from through-wall cracking and leakage (ASME) to crack initiation (NUREG-6909). This transformation is based on current industry experience with material degradation early in plant life and can be attributed to fabrication issues and environment concerns where cycle counting has been unsuccessful. This new perspective provides a different approach to cycle counting that incorporates all of the information about the material conditions. This approach goes beyond the consideration of a static analysis and includes a dynamic assessment of component health, which is required for operating plants. This health definition should consider fabrication, inspections, transient conditions and industry operating experience. In addition, this collection of information can be transparent to a broader audience that may not have a full understanding of the system design or the potential causes of early material degradation. This paper will present the key points that are needed for a successful fatigue monitoring desktop guide. (authors)

  7. Stand-alone photovoltaic (PV) integrated with earth to air heat exchanger (EAHE) for space heating/cooling of adobe house in New Delhi (India)

    International Nuclear Information System (INIS)

    Chel, Arvind; Tiwari, G.N.

    2010-01-01

    This paper deals with an experimental outdoor annual performance evaluation of 2.32 kW P photovoltaic (PV) power system located at solar energy park in New Delhi composite climatic conditions. This PV system operates the daily electrical load nearly 10 kW h/day which comprises of various applications such as electric air blower of an earth to air heat exchanger (EAHE) used for heating/cooling of adobe house, ceiling fan, fluorescent tube-light, computer, submersible water pump, etc. The outdoor efficiencies, power generated and lost in PV system components were determined using hourly experimental measured data for 1 year on typical clear day in each month. These realistic data are useful for design engineers for outdoor assessment of PV system components. The energy conservation, mitigation of CO 2 emission and carbon credit potential of the existing PV integrated EAHE system is presented in this paper. Also, the energy payback time (EPBT) and unit cost of electricity were determined for both stand-alone PV (SAPV) and building roof integrated PV (BIPV) systems.

  8. Development of Stand Alone Application Tool for Processing and Quality Measurement of Weld Imperfection Image Captured by μ-Focused Digital Radiography Using MATLAB- Based Graphical User Interface

    Directory of Open Access Journals (Sweden)

    PZ Nadila

    2012-12-01

    Full Text Available Digital radiography incresingly is being applied in the fabrication industry. Compared to film- based radiography, digitally radiographed images can be acquired with less time and fewer exposures. However, noises can simply occur on the digital image resulting in a low-quality result. Due to this and the system’s complexity, parameters’ sensitivity, and environmental effects, the results can be difficult to interpret, even for a radiographer. Therefore, the need of an application tool to improve and evaluate the image is becoming urgent. In this research, a user-friendly tool for image processing and image quality measurement was developed. The resulting tool contains important components needed by radiograph inspectors in analyzing defects and recording the results. This tool was written by using image processing and the graphical user interface development environment and compiler (GUIDE toolbox available in Matrix Laboratory (MATLAB R2008a. In image processing methods, contrast adjustment, and noise removal, edge detection was applied. In image quality measurement methods, mean square error (MSE, peak signal-to-noise ratio (PSNR, modulation transfer function (MTF, normalized signal-to-noise ratio (SNRnorm, sensitivity and unsharpness were used to measure the image quality. The graphical user interface (GUI wass then compiled to build a Windows, stand-alone application that enables this tool to be executed independently without the installation of MATLAB.

  9. The Research on Second-Order ADRC Algorithm of Using Wind Turbine Virtual Inertia to Participate in Primary Frequency Regulation in a Small Stand-Alone Microgrid

    Directory of Open Access Journals (Sweden)

    Wang Yi

    2018-01-01

    Full Text Available In order to improve the transient stability of frequency in a small stand-alone microgrid (SSM, this paper takes a SSM composed of a direct-drive permanent magnet synchronous generator (D-PMSG and a micro gas turbine (MGT as the background and uses wind turbine generator (WTG virtual inertia (VI to participate in the primary (short-term system frequency regulation. First of all, this paper constructs a grid-connected model composed of a WTG and a MGT, analyzes the WTG virtual inertia frequency regulation mechanism, and explains the principle of proportional-differentiation (PD virtual inertia control (VIC and its shortcomings. Secondly, the paper introduces the structure principle of n-order active disturbance rejection control (ADRC and deduces the design process of second-order ADRC-VIC. Finally, through the simulation and experimental verification, comparing the frequency perturbation of without-VIC, PD-VIC, and ADRC-VIC, it is concluded that PD-VIC and ADRC-VIC both can use the WTG virtual inertia to participate in the primary frequency regulation. The frequency regulation effect of ADRC-VIC is better than PD-VIC, ADRC-VIC can extend the rotor speed recovery time and avoid overshoot, and its frequency fluctuation amplitude and settling time are obviously improved, and ADRC-VIC can effectively avoid the overshoot phenomenon of the MGT output power.

  10. Optimal Sizing of a Stand-Alone Hybrid Power System Based on Battery/Hydrogen with an Improved Ant Colony Optimization

    Directory of Open Access Journals (Sweden)

    Weiqiang Dong

    2016-09-01

    Full Text Available A distributed power system with renewable energy sources is very popular in recent years due to the rapid depletion of conventional sources of energy. Reasonable sizing for such power systems could improve the power supply reliability and reduce the annual system cost. The goal of this work is to optimize the size of a stand-alone hybrid photovoltaic (PV/wind turbine (WT/battery (B/hydrogen system (a hybrid system based on battery and hydrogen (HS-BH for reliable and economic supply. Two objectives that take the minimum annual system cost and maximum system reliability described as the loss of power supply probability (LPSP have been addressed for sizing HS-BH from a more comprehensive perspective, considering the basic demand of load, the profit from hydrogen, which is produced by HS-BH, and an effective energy storage strategy. An improved ant colony optimization (ACO algorithm has been presented to solve the sizing problem of HS-BH. Finally, a simulation experiment has been done to demonstrate the developed results, in which some comparisons have been done to emphasize the advantage of HS-BH with the aid of data from an island of Zhejiang, China.

  11. The international phase 4 validation study of the EORTC QLQ-SWB32: A stand-alone measure of spiritual well-being for people receiving palliative care for cancer

    NARCIS (Netherlands)

    Vivat, B.; Young, T. E.; Winstanley, J.; Arraras, J. I.; Black, K.; Boyle, F.; Bredart, A.; Costantini, A.; Guo, J.; Irarrazaval, M. E.; Kobayashi, K.; Kruizinga, R.; Navarro, M.; Omidvari, S.; Rohde, G. E.; Serpentini, S.; Spry, N.; van Laarhoven, H. W. M.; Yang, G. M.

    2017-01-01

    The EORTC Quality of Life Group has just completed the final phase (field-testing and validation) of an international project to develop a stand-alone measure of spiritual well-being (SWB) for palliative cancer patients. Participants (n = 451)-from 14 countries on four continents; 54% female; 188

  12. The Impact of Course Delivery Systems on Student Achievement and Sense of Community: A Comparison of Learning Community versus Stand-Alone Classroom Settings in an Open-Enrollment Inner City Public Community College

    Science.gov (United States)

    Bandyopadhyay, Pamela

    2010-01-01

    This study examined the effects of two types of course delivery systems (learning community classroom environments versus stand-alone classroom environments) on the achievement of students who were simultaneously enrolled in remedial and college-level social science courses at an inner city open-enrollment public community college. This study was…

  13. Nuclear plant analyzer desktop workstation

    International Nuclear Information System (INIS)

    Beelman, R.J.

    1990-01-01

    In 1983 the U.S. Nuclear Regulatory Commission (USNRC) commissioned the Idaho National Engineering Laboratory (INEL) to develop a Nuclear Plant Analyzer (NPA). The NPA was envisioned as a graphical aid to assist reactor safety analysts in comprehending the results of thermal-hydraulic code calculations. The development was to proceed in three distinct phases culminating in a desktop reactor safety workstation. The desktop NPA is now complete. The desktop NPA is a microcomputer based reactor transient simulation, visualization and analysis tool developed at INEL to assist an analyst in evaluating the transient behavior of nuclear power plants by means of graphic displays. The NPA desktop workstation integrates advanced reactor simulation codes with online computer graphics allowing reactor plant transient simulation and graphical presentation of results. The graphics software, written exclusively in ANSI standard C and FORTRAN 77 and implemented over the UNIX/X-windows operating environment, is modular and is designed to interface to the NRC's suite of advanced thermal-hydraulic codes to the extent allowed by that code. Currently, full, interactive, desktop NPA capabilities are realized only with RELAP5

  14. Hydrogen-based energy storage unit for stand alone PV systems; L'hydrogene electrolytique comme moyen de stockage d'electricite pour systemes photovoltaiques isoles

    Energy Technology Data Exchange (ETDEWEB)

    Labbe, J

    2006-12-15

    Stand alone systems supplied only by a photovoltaic generator need an energy storage unit to be fully self sufficient. Lead acid batteries are commonly used to store energy because of their low cost, despite several operational constraints. A hydrogen-based energy storage unit (HESU) could be another candidate, including an electrolyser, a fuel cell and a hydrogen tank. However many efforts still need to be carried out for this technology to reach an industrial stage. In particular, market outlets must be clearly identified. The study of small stationary applications (few kW) is performed by numerical simulations. A simulator is developed in the Matlab/Simulink environment. It is mainly composed of a photovoltaic field and a storage unit (lead acid batteries, HESU, or hybrid storage HESU/batteries). The system component sizing is achieved in order to ensure the complete system autonomy over a whole year of operation. The simulator is tested with 160 load profiles (1 kW as a yearly mean value) and three locations (Algeria, France and Norway). Two coefficients are set in order to quantify the correlation between the power consumption of the end user and the renewable resource availability at both daily and yearly scales. Among the tested cases, a limit value of the yearly correlation coefficient came out, enabling to recommend the use of the most adapted storage to a considered case. There are cases for which using HESU instead of lead acid batteries can increase the system efficiency, decrease the size of the photovoltaic field and improve the exploitation of the renewable resource. In addition, hybridization of HESU with batteries always leads to system enhancements regarding its sizing and performance, with an efficiency increase by 10 to 40 % depending on the considered location. The good agreement between the simulation data and field data gathered on real systems enabled the validation of the models used in this study. (author)

  15. Diagnostic performance of a stand-alone central blood pressure monitor: application of central blood pressure in the diagnosis of high blood pressure.

    Science.gov (United States)

    Cheng, Hao-Min; Sung, Shih-Hsien; Chuang, Shao-Yuan; Pearson, Alan; Tufanaru, Catalin; White, Sarahlouise; Yu, Wen-Chung; Chen, Chen-Huan

    2014-03-01

    Oscillometric central blood pressure (CBP) monitors have emerged as a new technology for blood pressure (BP) measurements. With a newly proposed diagnostic threshold for CBP, we investigated the diagnostic performance of a novel CBP monitor. We recruited a consecutive series of 138 subjects (aged 30-93 years) without previous use of antihypertensive agents for simultaneous invasive and noninvasive measurements of BP in a catheterization laboratory. With the cutoff (CBP ≥130/90 mm Hg) for high blood pressure (HBP), the sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of the novel CBP monitor were calculated with reference to the measured CBP. In comparison, the diagnostic performance of the conventional cuff BP was also evaluated. The noninvasive CBP for detecting HBP in a sample with a prevalence of 52% showed a sensitivity of 93% (95% confidence interval (CI) = 91-95), specificity of 95% (95% CI = 94-97), PPV of 96% (95% CI = 94-97), and NPV of 93% (95% CI = 90-95). In contrast, with cuff BP and the traditional HBP criterion (cuff BP ≥140/90 mm Hg), the sensitivity, specificity, PPV, and NPV were 49% (95% CI = 44-53), 94% (95% CI = 92-96), 90% (95% CI = 86-93), and 63% (95% CI 59-66), respectively. A stand-alone oscillometric CBP monitor may provide CBP values with acceptable diagnostic accuracy. However, with reference to invasively measured CBP, cuff BP had low sensitivity and NPV, which could render possible management inaccessible to a considerable proportion of HBP patients, who may be identifiable through noninvasive CBP measurements from the CBP monitor.

  16. A Lower T1 Slope as a Predictor of Subsidence in Anterior Cervical Discectomy and Fusion with Stand-Alone Cages.

    Science.gov (United States)

    Lee, Su Hun; Lee, Jun Seok; Sung, Soon Ki; Son, Dong Wuk; Lee, Sang Weon; Song, Geun Sung

    2017-09-01

    Preoperative parameters including the T1 slope (T1S) and C2-C7 sagittal vertical axis (SVA) have been recognized as predictors of kyphosis after laminoplasty, which is accompanied by posterior neck muscle damage. The importance of preoperative parameters has been under-estimated in anterior cervical discectomy and fusion (ACDF) because there is no posterior neck muscle damage. We aimed to determine whether postoperative subsidence and pseudarthrosis could be predicted according to specific parameters on preoperative plain radiographs. We retrospectively analyzed 41 consecutive patients (male: female, 22: 19; mean age, 51.15±9.25 years) who underwent ACDF with a stand-alone polyether-ether-ketone (PEEK) cage (>1 year follow-up). Parameters including SVA, T1S, segmental angle and range of motion (ROM), C2-C7 cervical angle and ROM, and segmental inter-spinous distance were measured on preoperative plain radiographs. Risk factors of subsidence and pseudarthrosis were determined using multivariate logistic regression. Fifty-five segments (27 single-segment and 14 two-segment fusions) were included. The subsidence and pseudarthrosis rates based on the number of segments were 36.4% and 29.1%, respectively. Demographic data and fusion level were unrelated to subsidence. A greater T1S was associated with a lower risk of subsidence (p=0.017, odds ratio=0.206). A cutoff value of T1Ssubsidence (sensitivity: 70%, specificity: 68.6%). There were no preoperative predictors of pseudarthrosis except old age. A lower T1S (T1Ssubsidence following ACDF. Surgeons need to be aware of this risk factor and should consider various supportive procedures to reduce the subsidence rates for such cases.

  17. Performance of natural curaua fiber-reinforced polyester composites under 7.62 mm bullet impact as a stand-alone ballistic armor

    Directory of Open Access Journals (Sweden)

    Fábio de Oliveira Braga

    2017-10-01

    Full Text Available A multilayered armor system (MAS is intended to personal protection against high kinetic energy ammunition. MAS layers are composed of materials such as a front ceramic and a back composite that must show both high impact resistance and low weight, usually conflicting characteristics. Synthetic fiber fabrics, such as Kevlar™ and Dyneema™, are the favorite materials to back the front ceramic, due to their high strength, high modulus and relatively low weight. Recently, composites reinforced with natural fibers have been considered as MAS second layer owing to their good performance associated with other advantages as being cheaper and environmentally friendly. Among the natural fibers, those extracted from the leaves of the Ananas erectifolius plant, known as curaua, stand out due to its exceptional high strength and high modulus. Thus, the objective of the present work is to evaluate the performance of curaua fiber-reinforced polyester composites subjected to ballistic impact of high energy 7.62 mm ammunition. Composites reinforced with 0, 10, 20 and 30 vol.% of curaua fibers were produced and stand-alone tested as armor target to evaluate the absorbed energy. Analysis of variance (Anova and Tukey's honest significant difference test (HSD made it possible to compare the results to Kevlar™ laminates. Among the tested materials, the 30 vol.% fiber composites were found to be the best alternative to Kevlar™. Keywords: Composite, Natural fiber, Curaua fiber, Ballistic test

  18. Effects of a stand-alone web-based electronic screening and brief intervention targeting alcohol use in university students of legal drinking age: A randomized controlled trial.

    Science.gov (United States)

    Ganz, Thomas; Braun, Michael; Laging, Marion; Schermelleh-Engel, Karin; Michalak, Johannes; Heidenreich, Thomas

    2018-02-01

    Many intervention efforts targeting student drinking were developed to address US college students, which usually involves underage drinking. It remains unclear, if research evidence from these interventions is generalizable to university and college students of legal drinking age, e.g., in Europe. To evaluate the effectiveness of a translated and adapted version of the eCHECKUP TO GO, applied as stand-alone web-based electronic screening and brief intervention (e-SBI), in German university students at risk for hazardous drinking. A fully automated web-based two-arm parallel-group randomized controlled trial was conducted. Participants were randomized to an e-SBI or assessment-only (AO) condition. The current paper analyzed students with baseline AUDIT-C scores ≥3 for women and ≥4 for men (sample at baseline: e-SBI [n=514], AO [n=467]; 3-month follow-up: e-SBI [n=194], AO [n=231]; 6-month follow-up: e-SBI [n=146], AO [n=200]). The primary outcome was prior four weeks' alcohol consumption. Secondary outcomes were frequency of heavy drinking occasions, peak blood alcohol concentration, and number of alcohol-related problems. Mixed linear model analyses revealed significant interaction effects between groups and time points on the primary outcome after 3 and 6months. Compared to students in the AO condition, students in the e-SBI condition reported consuming 4.11 fewer standard drinks during the previous four weeks after 3months, and 4.78 fewer standard drinks after 6months. Mixed results were found on secondary outcomes. The results indicate that evidence on and knowledge of web-based e-SBIs based on US college student samples is transferable to German university students of legal drinking age. However, knowledge of what motivates students to complete programs under voluntary conditions, although rare, is needed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Comparison of a Stand-Alone Anchored Spacer Versus Plate-Cage Construct in the Treatment of Two Noncontiguous Levels of Cervical Spondylosis: A Preliminary Investigation.

    Science.gov (United States)

    Shi, Sheng; Zheng, Shuang; Li, Xin-Feng; Yang, Li-Li; Liu, Zu-De; Yuan, Wen

    2016-05-01

    The application of stand-alone anchored spacer (SAAS) in anterior cervical discectomy and fusion (ACDF) has been proven to be safe and effective to treat cervical spondylosis. Skip-level ACDF with SAAS, fusing only the involved levels without anterior plates, may be the optimal treatment. The aim of the study was to compare the clinical outcomes, radiologic results of SAAS, and plate-cage construct in the treatment of 2 noncontiguous levels of cervical spondylosis. A total of 65 patients with 2 noncontiguous levels of cervical spondylosis were included in the retrospective review of prospective collected data. The clinical and radiologic outcomes were assessed with the Japanese Orthopaedic Association score, Neck Disability Index, cervical alignment, and range of motion and disc height of intermediate segment, respectively. All the aforementioned parameters were compared before and after surgery in the respective group, which also were compared between the 2 groups. Complications also were recorded, and correlations between the surgical outcome and various factors were analyzed. No significant differences existed in clinical results between the 2 groups (P > 0.05). In addition, no statistical significance was observed in fusion rate, cervical alignment, and range of motion and disc height of intermediate segment, dysphagia, and hoarseness (P > 0.05). Preoperative Japanese Orthopaedic Association score and high-intensity signal in T2-weighted images were important predictors for surgical outcome. Skip-level ACDF with SAAS is a safe and effective treatment of 2 noncontiguous levels of cervical spondylosis without obvious contraindications, which can keep the IS intact, and have a low impact on the IS. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. CANGS DB: a stand-alone web-based database tool for processing, managing and analyzing 454 data in biodiversity studies.

    Science.gov (United States)

    Pandey, Ram Vinay; Nolte, Viola; Boenigk, Jens; Schlötterer, Christian

    2011-06-30

    Next generation sequencing (NGS) is widely used in metagenomic and transcriptomic analyses in biodiversity. The ease of data generation provided by NGS platforms has allowed researchers to perform these analyses on their particular study systems. In particular the 454 platform has become the preferred choice for PCR amplicon based biodiversity surveys because it generates the longest sequence reads. Nevertheless, the handling and organization of massive amounts of sequencing data poses a major problem for the research community, particularly when multiple researchers are involved in data acquisition and analysis. An integrated and user-friendly tool, which performs quality control, read trimming, PCR primer removal, and data organization is desperately needed, therefore, to make data interpretation fast and manageable. We developed CANGS DB (Cleaning and Analyzing Next Generation Sequences DataBase) a flexible, stand alone and user-friendly integrated database tool. CANGS DB is specifically designed to organize and manage the massive amount of sequencing data arising from various NGS projects. CANGS DB also provides an intuitive user interface for sequence trimming and quality control, taxonomy analysis and rarefaction analysis. Our database tool can be easily adapted to handle multiple sequencing projects in parallel with different sample information, amplicon sizes, primer sequences, and quality thresholds, which makes this software especially useful for non-bioinformaticians. Furthermore, CANGS DB is especially suited for projects where multiple users need to access the data. CANGS DB is available at http://code.google.com/p/cangsdb/. CANGS DB provides a simple and user-friendly solution to process, store and analyze 454 sequencing data. Being a local database that is accessible through a user-friendly interface, CANGS DB provides the perfect tool for collaborative amplicon based biodiversity surveys without requiring prior bioinformatics skills.

  1. CANGS DB: a stand-alone web-based database tool for processing, managing and analyzing 454 data in biodiversity studies

    Directory of Open Access Journals (Sweden)

    Schlötterer Christian

    2011-06-01

    Full Text Available Abstract Background Next generation sequencing (NGS is widely used in metagenomic and transcriptomic analyses in biodiversity. The ease of data generation provided by NGS platforms has allowed researchers to perform these analyses on their particular study systems. In particular the 454 platform has become the preferred choice for PCR amplicon based biodiversity surveys because it generates the longest sequence reads. Nevertheless, the handling and organization of massive amounts of sequencing data poses a major problem for the research community, particularly when multiple researchers are involved in data acquisition and analysis. An integrated and user-friendly tool, which performs quality control, read trimming, PCR primer removal, and data organization is desperately needed, therefore, to make data interpretation fast and manageable. Findings We developed CANGS DB (Cleaning and Analyzing Next Generation Sequences DataBase a flexible, stand alone and user-friendly integrated database tool. CANGS DB is specifically designed to organize and manage the massive amount of sequencing data arising from various NGS projects. CANGS DB also provides an intuitive user interface for sequence trimming and quality control, taxonomy analysis and rarefaction analysis. Our database tool can be easily adapted to handle multiple sequencing projects in parallel with different sample information, amplicon sizes, primer sequences, and quality thresholds, which makes this software especially useful for non-bioinformaticians. Furthermore, CANGS DB is especially suited for projects where multiple users need to access the data. CANGS DB is available at http://code.google.com/p/cangsdb/. Conclusion CANGS DB provides a simple and user-friendly solution to process, store and analyze 454 sequencing data. Being a local database that is accessible through a user-friendly interface, CANGS DB provides the perfect tool for collaborative amplicon based biodiversity surveys

  2. Size-exclusion chromatography as a stand-alone methodology identifies novel markers in mass spectrometry analyses of plasma-derived vesicles from healthy individuals

    Directory of Open Access Journals (Sweden)

    Armando de Menezes-Neto

    2015-07-01

    Full Text Available Plasma-derived vesicles hold a promising potential for use in biomedical applications. Two major challenges, however, hinder their implementation into translational tools: (a the incomplete characterization of the protein composition of plasma-derived vesicles, in the size range of exosomes, as mass spectrometric analysis of plasma sub-components is recognizably troublesome and (b the limited reach of vesicle-based studies in settings where the infrastructural demand of ultracentrifugation, the most widely used isolation/purification methodology, is not available. In this study, we have addressed both challenges by carrying-out mass spectrometry (MS analyses of plasma-derived vesicles, in the size range of exosomes, from healthy donors obtained by 2 alternative methodologies: size-exclusion chromatography (SEC on sepharose columns and Exo-Spin™. No exosome markers, as opposed to the most abundant plasma proteins, were detected by Exo-Spin™. In contrast, exosomal markers were present in the early fractions of SEC where the most abundant plasma proteins have been largely excluded. Noticeably, after a cross-comparative analysis of all published studies using MS to characterize plasma-derived exosomes from healthy individuals, we also observed a paucity of “classical exosome markers.” Independent of the isolation method, however, we consistently identified 2 proteins, CD5 antigen-like (CD5L and galectin-3-binding protein (LGALS3BP, whose presence was validated by a bead-exosome FACS assay. Altogether, our results support the use of SEC as a stand-alone methodology to obtain preparations of extracellular vesicles, in the size range of exosomes, from plasma and suggest the use of CD5L and LGALS3BP as more suitable markers of plasma-derived vesicles in MS.

  3. Impact of a stand-alone course in gerontological nursing on undergraduate nursing students' perceptions of working with older adults: A Quasi-experimental study.

    Science.gov (United States)

    Koehler, Amy Reitmaier; Davies, Susan; Smith, Linda Reveling; Hooks, Tisha; Schanke, Hailee; Loeffler, April; Carr, Courtney; Ratzlaff, Nicole

    2016-11-01

    With an aging population, it is critical that nurses are educated and prepared to offer quality healthcare to this client group. Incorporating gerontology content into nursing curricula and addressing students' perceptions and career choices in relation to working with older adults are important faculty concerns. To examine the impact of a stand-alone course in gerontological nursing on undergraduate nursing students' perceptions of working with older adults and career intentions. Quasi-experimental, pre- and post-test design. Medium-sized state university in the Mid Western United States PARTICIPANTS: Data were collected from three student cohorts during the spring semesters of 2012 (n=98), 2013 (n=80) and 2014 (n=88) for a total of N=266 with an average response rate of 85%. A survey instrument was administered via Qualtrics and completed by students prior to, and following completion of the course. There was an overall significant increase (p=0.000) in positive perceptions of working with older adults among nursing students following completion of the course. The majority of participants (83.5%) reported having previous experience with older adults. Those with previous experience had higher perception scores at pre-test than those without (p=0.000). Post-test scores showed no significant difference between these two groups, with both groups having increased perception scores (p=0.120). Student preferences for working with different age groups suggested an overall increase in preference for working with older adults following the course. A course in gerontological nursing, incorporating learning partnerships with community dwelling older adults, promotes positive perceptions of working with older adults, independently of the quality of prior experience. There was some evidence that students changed their preferences of working with different age groups in favor of working with older adults. Further research should be conducted to determine the mechanisms through

  4. The Point Lepreau Desktop Simulator

    International Nuclear Information System (INIS)

    MacLean, M.; Hogg, J.; Newman, H.

    1997-01-01

    The Point Lepreau Desktop Simulator runs plant process modeling software on a 266 MHz single CPU DEC Alpha computer. This same Alpha also runs the plant control computer software on an SSCI 125 emulator. An adjacent Pentium PC runs the simulator's Instructor Facility software, and communicates with the Alpha through an Ethernet. The Point Lepreau Desktop simulator is constructed to be as similar as possible to the Point Lepreau full scope training simulator. This minimizes total maintenance costs and enhances the benefits of the desktop simulator. Both simulators have the same modeling running on a single CPU in the same schedule of calculations. Both simulators have the same Instructor Facility capable of developing and executing the same lesson plans, doing the same monitoring and control of simulations, inserting all the same malfunctions, performing all the same overrides, capable of making and restoring all the same storepoints. Both simulators run the same plant control computer software - the same assembly language control programs as the power plant uses for reactor control, heat transport control, annunciation, etc. This is a higher degree of similarity between a desktop simulator and a full scope training simulator than previously reported for a computer controlled nuclear plant. The large quantity of control room hardware missing from the desktop simulator is replaced by software. The Instructor Facility panel override software of the training simulator provides the means by which devices (switches, controllers, windows, etc.) on the control room panels can be controlled and monitored in the desktop simulator. The CRT of the Alpha provides a mouse operated DCC keyboard mimic for controlling the plant control computer emulation. Two emulated RAMTEK display channels appear as windows for monitoring anything of interest on plant DCC displays, including one channel for annunciation. (author)

  5. Stand-alone containment analysis of Phébus FPT tests with ASTEC and MELCOR codes: the FPT-2 test

    Directory of Open Access Journals (Sweden)

    Bruno Gonfiotti

    2018-03-01

    Full Text Available During the last 40 years, many studies have been carried out to investigate the different phenomena occurring during a Severe Accident (SA in a Nuclear Power Plant (NPP. Such efforts have been supported by the execution of different experimental campaigns, and the integral Phébus FP tests were probably some of the most important experiments in this field. In these tests, the degradation of a Pressurized Water Reactor (PWR fuel bundle was investigated employing different control rod materials and burn-up levels in strongly or weakly oxidizing conditions. From the findings on these and previous tests, numerical codes such as ASTEC and MELCOR have been developed to analyze the evolution of a SA in real NPPs. After the termination of the Phébus FP campaign, these two codes have been furthermore improved to implement the more recent findings coming from different experimental campaigns. Therefore, continuous verification and validation is still necessary to check that the new improvements introduced in such codes allow also a better prediction of these Phébus tests. The aim of the present work is to re-analyze the Phébus FPT-2 test employing the updated ASTEC and MELCOR code versions. The analysis focuses on the stand-alone containment aspects of this test, and three different spatial nodalizations of the containment vessel (CV have been developed. The paper summarizes the main thermal-hydraulic results and presents different sensitivity analyses carried out on the aerosols and fission products (FP behavior. When possible, a comparison among the results obtained during this work and by different authors in previous work is also performed. This paper is part of a series of publications covering the four Phébus FP tests using a PWR fuel bundle: FPT-0, FPT-1, FPT-2, and FPT-3, excluding the FPT-4 one, related to the study of the release of low-volatility FP and transuranic elements from a debris bed and a pool of melted fuel. Keywords: Safety

  6. Desktop Virtualization: Applications and Considerations

    Science.gov (United States)

    Hodgman, Matthew R.

    2013-01-01

    As educational technology continues to rapidly become a vital part of a school district's infrastructure, desktop virtualization promises to provide cost-effective and education-enhancing solutions to school-based computer technology problems in school systems locally and abroad. This article outlines the history of and basic concepts behind…

  7. IT4Fashion 2016

    CERN Document Server

    Bandinelli, Romeo

    2017-01-01

    This book presents high-quality original contributions on the fashion supply chain. A wide spectrum of application domains are covered, processing of big data coming from digital and social media channels, fashion new product development, fashion design, fashion marketing and communication strategy, business models and entrepreneurship, e-commerce and omni-channel management, corporate social responsibility, new materials for fashion product, wearable technologies. The contents are based on presentations delivered at IT4Fashion 2016, the 6th International Conference in Business Models and ICT Technologies for the Fashion Supply Chain, which was held in Florence, Italy, in April 2016. This conference series represents a targeted response to the growing need for research that reports and debates supply chain business models and technologies applied to the fashion industry, with the aim of increasing knowledge in the area of product lifecycle management and supply chain management in that industry.

  8. When the Internet Knocks, Unlock the Desktop.

    Science.gov (United States)

    Nyerges, Mike

    1999-01-01

    Describes one public school library's struggles and solutions to problems associated with managing its new Windows desktop. To implement goals for organizing the desktop, the library selected the FoolProof desktop security system, utilized networks administration to enforce the school's Acceptable Use Policy, and used Windows 95 System Policies.…

  9. Dress and fashion

    Directory of Open Access Journals (Sweden)

    Ivanović-Barišić Milina

    2006-01-01

    Full Text Available Fashion is a contemporary phenomenon, with an increasing role in shaping behavior in contemporary societies. Fashion influences many areas of human creativity, especially mode of dressing. Dressing usually assumes traditional costume, which somewhat stayed static during history. Starting with Renaissance period, Europe experienced frequent changes in fashion styles (all changes came later to Serbia. In its beginnings, fashion was accepted mostly by wealthier classes, but in time, it gradually became available to general population, becoming so a part of the "consumers mentality". This availability of the fashion industry facilitates to many a brief, sharp cut with past in a short period of time. And while costume was characterized by certain stability of forms and materials, fashion represents a completely different phenomenon. That is, fashion is characterized by instability of forms and constant changes, and by relatively short periods of duration of styles and contemporary dressing.

  10. Wireless network of stand-alone end effect probes for soil in situ permittivity measurements over the 100MHZ-6GHz frequency range

    Science.gov (United States)

    Demontoux, François; Bircher, Simone; Ruffié, Gilles; Bonnaudiin, Fabrice; Wigneron, Jean-Pierre; Kerr, Yann

    2017-04-01

    , it should be useful to install many probes on the same site to obtain permittivity measurements over a large area. To reach this goal, the probes should communicate with each other to send data to a record device. Furthermore, it is needed to record measurements over a long time period (many months) to study the in-situ dielectric soil property variations according to changing weather conditions and seasonal trends. The goal of the research work presented is to develop a dielectric sensor system based on end effect probes able to communicate the data using wireless technology. It must be stand-alone from an electric and data recording point of view so it must integrate a VNA circuit instead of the ANRITSU VNA used for the moment. The LoRa wireless technology has been selected because of its low electric consumption and the large distance between equipment available. LoRaWAN™ is a Low Power Wide Area Network specification intended for wireless battery operated devices. The LoRaWAN data rates range from 0.3 kbps to 50 kbps which is sufficient for our probes' data exchanges. We will present the work done to perform the VNA and the LoRa communication board as well as the work done to improve the probes and the permittivity computation algorithm.

  11. Translating Fashion into Danish

    DEFF Research Database (Denmark)

    Riegels Melchior, Marie; Skov, Lise; Fauerholt Csaba, Fabian

    2011-01-01

    With their association to enterprise and innovation, creative industries have emerged as a legitimate concern in national cultural and economical policy in many countries across the world. In Denmark, the fashion business, in particular, has been hailed as a model for successful (post)industrial...... transformation. In this paper, we explore the birth of Danish fashion from the ashes of the country’s clothing manufacturing industry, suggesting that the very notion of Danish fashion is indicative of – and enabled by – a development towards a polycentric fashion system. The intriguing idea that fashion could...... this principle to study the realms of market, culture and politics within a common analytical framework. In our analysis, the state responds to industry transformation, interprets it and develops its own agenda. But it can hardly be said to develop policies for the industry. On the contrary, we suggest, fashion...

  12. Curriculum Guide for Fashion Merchandising (Fashion Salesperson).

    Science.gov (United States)

    Gregory, Margaret R.

    This curriculum guide is designed to help teachers teach a course in fashion merchandising to high school students. The guide contains eight performance-based learning modules, each consisting of one to seven units. Each unit teaches a job-relevant task, and includes performance objectives, performance guides, resources, learning activities,…

  13. Detox fashion supply chain

    CERN Document Server

    2017-01-01

    This first volume on detox fashion discusses various interesting topics including a Toxic-Free Supply Chain for Textiles and Clothing; Environmental Issues in Textiles; Global Regulations, Restrictions & Research; Making the Change: Consumer Adoption of Sustainable Fashion; and Strategies for Detoxing Your Wardrobe. It provides an overview of the chemical-related issues confronting the fashion sector, summarizes global regulations, and discusses how to make the change by changing consumers’ attitude towards adopting sustainable fashion, as well as the best strategies for detoxing our wardrobes.

  14. Translating Fashion into Danish

    DEFF Research Database (Denmark)

    Riegels Melchior, Marie; Skov, Lise; Fauerholt Csaba, Fabian

    2011-01-01

    With their association to enterprise and innovation, creative industries have emerged as a legitimate concern in national cultural and economical policy in many countries across the world. In Denmark, the fashion business, in particular, has been hailed as a model for successful (post)industrial ......With their association to enterprise and innovation, creative industries have emerged as a legitimate concern in national cultural and economical policy in many countries across the world. In Denmark, the fashion business, in particular, has been hailed as a model for successful (post......)industrial transformation. In this paper, we explore the birth of Danish fashion from the ashes of the country’s clothing manufacturing industry, suggesting that the very notion of Danish fashion is indicative of – and enabled by – a development towards a polycentric fashion system. The intriguing idea that fashion could...... emanate from Denmark and secure growth, jobs and exports even outside the fashion business has taken hold among policymakers, and compelled the government to embrace fashion as a national project. In investigating the emergence and rising stature of Danish fashion, particular at home, we first establish...

  15. IEA PVPS Task 3. Use of photovoltaic systems in stand-alone and island applications. 'Swiss participation'; IEA PVPS Task 3. Use of photovoltaic systems in stand-alone and island applications. 'Participation Suisse'

    Energy Technology Data Exchange (ETDEWEB)

    Villoz, M. [Dynatex SA, Morges (Switzerland)

    2004-07-01

    This report describes the work done during five years of the second phase of Task 3 of the photovoltaic power systems programme of the International Energy Agency (IEA-PVPS). Task 3 activities were concentrated on stand-alone photovoltaic systems with the main effort on improving the quality and reducing the cost of these systems. The work was divided in 2 sub-tasks whose first one was concentrated on quality insurance schemes and second one on technical recommendations coming from practical experience. Twelve original reports have been published covering topics that can be sorted in 4 categories: the first one is dedicated on quality issues with a review of existing standards in the participating countries and a double paper giving quality assurance recommendations on project management and examples of applying these rules in practical cases. The second category dwelled on photovoltaic systems with papers on charge controllers, on lightning protection and monitoring of systems. The third category presents interesting studies on the storage of energy which remains the main subject where improvements should be made in order to lower the cost of energy; four papers describe the management and the test procedures of lead-acid batteries, how to choose a lead-acid battery and finally are there alternatives to lead-acid batteries for the storage of photovoltaic electricity. The last category worked on loads and users of renewable energy and gives a large amount of experience with loads, how to choose them and how the energy can be better used through demand side management. (author)

  16. Fashion: Apparel and Textiles.

    Science.gov (United States)

    Kores, Nancy; Watson, Kathy

    This curriculum guide is designed to ensure student attainment of basic home economics content knowledges and skills that will provide a strong foundation for employment in the fashion industry. Competency/skill and task lists are followed by employability skills charts for the occupations of fashion coordinator and fabric coordinator; the charts…

  17. Fashioning the Future

    DEFF Research Database (Denmark)

    Langevang, Thilde

    2017-01-01

    A vibrant fashion scene is emerging in Africa, spearheaded by a new generation of young fashion entrepreneurs. Drawing on a multi-sited study of Ghanaian, Ugandan and Zambian female designers, this article examines the emerging fashion industry as a site for entrepreneuring where people......’s aspirations to bring about personal, cultural and socio-economic development converge. The paper reveals how fashion designers envision their endeavours as pathways for pursuing their passion, for changing the associations ascribed to ‘Africanness’, and for revitalising failing clothing industries in Africa....... The paper proposes that while the emerging character of the industry creates uncertainty and many obstacles for running viable businesses, fashion designers remain enthused by narratives about the industry’s future prospects....

  18. Fashion, Mediations & Method Assemblages

    DEFF Research Database (Denmark)

    Sommerlund, Julie; Jespersen, Astrid Pernille

    relations between individuals and social contexts, aesthetics and production, distribution and consumption, as well as relations between fluidity and stability. By addressing the field of fashion, the paper proposes to shed light on an empirical setting which has so far been studied either as a purely......This paper discusses relations between aesthetics of fashion and the sociality of fashion. It takes as its premise that aesthetics and sociality are co-constructed, and cannot be regarded as separate - although this has been the norm in the academic traditions of aesthetics and sociology...... to STS literature by expanding one of its central debates to a new empirical setting; fashion specifically, and the aesthetic-cultural field on a more general level. In trying to make a theoretical connection between aesthetics and sociality of fashion, the paper suggests the term of "mediator" (Hennion...

  19. Digital video for the desktop

    CERN Document Server

    Pender, Ken

    1999-01-01

    Practical introduction to creating and editing high quality video on the desktop. Using examples from a variety of video applications, benefit from a professional's experience, step-by-step, through a series of workshops demonstrating a wide variety of techniques. These include producing short films, multimedia and internet presentations, animated graphics and special effects.The opportunities for the independent videomaker have never been greater - make sure you bring your understanding fully up to date with this invaluable guide.No prior knowledge of the technology is assumed, with explanati

  20. Translating Fashion into Danish

    Directory of Open Access Journals (Sweden)

    Marie Riegels Melchior

    2011-06-01

    Full Text Available With their association to enterprise and innovation, creative industries have emerged as a legitimate concern in national cultural and economical policy in many countries across the world. In Denmark, the fashion business, in particular, has been hailed as a model for successful (postindustrial transformation. In this paper, we explore the birth of Danish fashion from the ashes of the country’s clothing manufacturing industry, suggesting that the very notion of Danish fashion is indicative of – and enabled by – a development towards a polycentric fashion system. The intriguing idea that fashion could emanate from Denmark and secure growth, jobs and exports even outside the fashion business has taken hold among policymakers, and compelled the government to embrace fashion as a national project. In investigating the emergence and rising stature of Danish fashion, particular at home, we first establish a theoretical frame for understanding the cultural economic policy and the motives, principles and strategies behind it. Then – drawing inspiration from Michel Callon’s “sociology of translation” with its moments of translation: problematization, interessement, enrolment and mobilization – we identify the actors and analyze their strategic roles and interrelationship through various phases of the development of Danish fashion. Callon’s actor network theory (ANT is based on the principle of “generalized symmetry” – originally using a single repertoire to analyze both society and nature. We adapt this principle to study the realms of market, culture and politics within a common analytical framework. In our analysis, the state responds to industry transformation, interprets it and develops its own agenda. But it can hardly be said to develop policies for the industry. On the contrary, we suggest, fashion is mobilized to lend its luster to the nation, its institutions and politicians.

  1. Broadly tunable, high-power terahertz radiation up to 73 K from a stand-alone Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+δ} mesa

    Energy Technology Data Exchange (ETDEWEB)

    Kitamura, T.; Watanabe, C.; Ishida, K.; Sekimoto, S.; Asanuma, K.; Yasui, T.; Nakade, K.; Shibano, Y.; Saiwai, Y. [Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8573 (Japan); Kashiwagi, T.; Minami, H.; Kadowaki, K. [Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8573 (Japan); Division of Materials Science, Faculty of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki 305-8573 (Japan); Yamamoto, T. [Wide Bandgap Materials Group, Optical and Electronic Materials Unit, Environment and Energy Materials Division, National Institute for Materials Science, 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Tsujimoto, M. [Department of Electronic Science and Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510 (Japan); Klemm, R. A. [Department of Physics, University of Central Florida, Orlando, Florida 32816-2385 (United States)

    2014-11-17

    High-power, continuous, broadly tunable THz radiation from 0.29 to 1.06 THz, was obtained from the outer current-voltage characteristic (IVC) branch of a single stand-alone mesa of the high-transition temperature T{sub c} superconductor Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+δ}. The particular metallic film structures placed both beneath and atop the mesas resulted in more efficient heat dissipation, higher allowed applied dc voltages, larger IVC loops, wider emission temperature ranges, and much broader emission frequency tunability than obtained previously.

  2. Minimally invasive lateral transpsoas interbody fusion using a stand-alone construct for the treatment of adjacent segment disease of the lumbar spine: review of the literature and report of three cases.

    Science.gov (United States)

    Palejwala, Sheri K; Sheen, Whitney A; Walter, Christina M; Dunn, Jack H; Baaj, Ali A

    2014-09-01

    We describe 3 patients who presented with radiographic signs and clinical symptoms of adjacent segment disease several years after undergoing L4-S1 posterior pedicle screw fusion. All patients underwent successful lateral lumbar interbody fusion (LLIF) at 1-2 levels above their previous constructs, using stand-alone cages, with complete resolution of radiculopathy and a significant improvement in low-back pain. In addition to a thorough analysis of these cases, we review the pertinent literature regarding treatment options for adjacent segment disease and the applications of the lateral lumbar interbody technique. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Fashioning the Future

    DEFF Research Database (Denmark)

    Langevang, Thilde

    A vibrant fashion scene is emerging in Africa, spearheaded by a new generation of young fashion designers. Drawing on a multi - sited study of Ghanaian, Ugandan and Zambian female designers, this article examines the emerging fashi on industry as a site for entrepreneuring where people......’s aspirations to bring about personal, cu ltural and socio - economic development converge. The paper reveals how fashion designers envision their endeavours as pathways for pursuing their passion, for changing the associations ascribed to ‘Africanness’, and for revitalising failing clothing industries....... The paper proposes that while th e emerging character of the industry creates uncertainty and many obstacles for running viable businesses, fashion designers remain enthused by narratives about the industry’s future prospects....

  4. Fashion, Bodies, and Objects

    OpenAIRE

    Jean-François Fourny

    1996-01-01

    This essay is based on the assumption that the body has undergone a process of fragmentation that started with "modern" art and commodity fetishism that is being amplified today by an increasingly fetishistic high fashion industry itself relayed by music videos and a gigantic pornography industry. This article begins with a discussion of fetishism and objectification as they appear in high fashion shows where underwear becomes wear (turning the inside into the outside), thus expanding (or dis...

  5. Labelling Fashion Markets

    OpenAIRE

    Aspers, P.

    2008-01-01

    The present article discusses how an ethical and environmental labelling system can be implemented in fashion garment markets. Consumers act in markets that provide them with more information than their limited cognitive capacity allows them to handle. Ethical and environmental labelling in markets characterized by change, such as the fashion garment market, makes decision-making even more complicated. The ethical and environmental labelling system proposed here is designed to alleviate firms...

  6. Feasibility Analysis and Simulation of a Stand-Alone Photovoltaic Energy System for Electricity Generation and Environmental Sustainability – equivalent to 650VA fuel-powered generator - popularly known as I pass my neighbour

    Directory of Open Access Journals (Sweden)

    Vincent Anayochukwu Ani

    2015-09-01

    Full Text Available Photovoltaic (PV power system can be used to replace wholly 650VA generator for electricity generation for household use in Nigeria. This paper presented the feasibility analysis of load data and simulation study of a stand-alone PV power system that produced the electrical needs of a household. This study is based on designing of PV energy system for household use. The patterns of load consumption within the household were studied and suitably modeled for simulation. The simulation study indicates that energy requirements to provide electricity which is equivalent to 650VA generator for household use in Nigeria can be accomplished by 520W solar PV array, 2312 Ah nominal capacity battery, and a 1kW DC/AC inverter. This would be suitable for deployment of 100% clean energy for environmental sustainability and uninterruptable power performance in the household. The results of this research show that, with a low-power consuming appliances, it is possible to meet the entire annual electricity demand of a single household solely through a stand-alone PV energy supply. Installing solar panels by most Nigerian home can significantly reduce home reliance on government power thereby reduce the strain on the current capacity of our power generation infrastructure. A detailed design and description of the system were presented in this paper.

  7. Feasibility Analysis and Simulation of a Stand-Alone Photovoltaic Energy System for Electricity Generation and Environmental Sustainability – Equivalent to 650VA Fuel-Powered Generator – Popularly Known as “I Pass My Neighbour”

    International Nuclear Information System (INIS)

    Ani, Vincent Anayochukwu

    2015-01-01

    Photovoltaic (PV) power system can be used to replace wholly 650VA generator for electricity generation for household use in Nigeria. This paper presented the feasibility analysis of load data and simulation study of a stand-alone PV power system that produced the electrical needs of a household. This study is based on designing of PV energy system for household use. The patterns of load consumption within the household were studied and suitably modeled for simulation. The simulation study indicates that energy requirements to provide electricity, which is equivalent to 650VA generator for household use in Nigeria, can be accomplished by 520 W solar PV array, 2312 Ah nominal capacity battery, and a 1 kW DC/AC inverter. This would be suitable for deployment of 100% clean energy for environmental sustainability and uninterruptable power performance in the household. The results of this research show that, with a low-power consuming appliances, it is possible to meet the entire annual electricity demand of a single household solely through a stand-alone PV energy supply. Installing solar panels by most Nigerian home can significantly reduce home reliance on government power thereby reduce the strain on the current capacity of our power generation infrastructure. A detailed design and description of the system were presented in this paper.

  8. Instant Citrix XenDesktop 5 starter

    CERN Document Server

    Magdy, Mahmoud

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This easy-to-follow, hands-on guide shows you how to implement desktop virtualization with real life cases and step-by-step instructions. It is a tutorial with step-by-step instructions and adequate screenshots for the installation and administration of Citrix XenDesktop.If you are new to XenDesktop or are looking to build your skills in desktop virtualization, this is your step-by-step guide to learning Citrix XenDesktop. For those architects a

  9. Learning from (luxury) fashion

    DEFF Research Database (Denmark)

    Hansen-Hansen, Erik

    2012-01-01

    In this paper design-led innovation is theorized from a double perspective: A diverse range of design types and strategies used in the luxury fashion business is presented through the prism of entrepreneurship as defined within the tradition of the Austrian School of Economics, especially Carl...... Menger (2007/1871), Ludwig von Mises (2007/1949), Randall G. Holcombe (2007) and Nicolai J. Foss and Peter G. Klein (2012) but also David Harper’s (1996) ‘Growth-of-knowledge theory’ of entrepreneurship. It is argued that luxury fashion business serves as a prime example of different design...

  10. Consuming the Fashion Tattoo

    DEFF Research Database (Denmark)

    Kjeldgaard, Dannie; Bengtsson, Anders

    2005-01-01

    From being considered a marginal and sometimes deviant behavior, the consumption of tattoos has become a mass consumer phenomenon. As tattoos have gained in popularity, it can be expected that the reasons for why people get tattoos have shifted as well. This paper explores consumers’ motivations...... for getting a fashion tattoo and the meaning associated with its consumption. Through phenomenological interviews with fashion tattooees, the themes 'art/fashion’, 'personalization and biographing’, 'contextual representation of self’, and 'meanings?’ are related to existing consumption theory....

  11. Is the radiographic subsidence of stand-alone cages associated with adverse clinical outcomes after cervical spine fusion? An observational cohort study with 2-year follow-up outcome scoring.

    Science.gov (United States)

    Zajonz, Dirk; Franke, Anne-Catherine; von der Höh, Nicolas; Voelker, Anna; Moche, Michael; Gulow, Jens; Heyde, Christoph-Eckhard

    2014-01-01

    The stand-alone treatment of degenerative cervical spine pathologies is a proven method in clinical practice. However, its impact on subsidence, the resulting changes to the profile of the cervical spine and the possible influence of clinical results compared to treatment with additive plate osteosynthesis remain under discussion until present. This study was designed as a retrospective observational cohort study to test the hypothesis that radiographic subsidence of cervical cages is not associated with adverse clinical outcomes. 33 cervical segments were treated surgically by ACDF with stand-alone cage in 17 patients (11 female, 6 male), mean age 56 years (33-82 years), and re-examined after eight and twenty-six months (mean) by means of radiology and score assessment (Medical Outcomes Study Short Form (MOS-SF 36), Oswestry Neck Disability Index (ONDI), painDETECT questionnaire and the visual analogue scale (VAS)). Subsidence was observed in 50.5% of segments (18/33) and 70.6% of patients (12/17). 36.3% of cases of subsidence (12/33) were observed after eight months during mean time of follow-up 1. After 26 months during mean time of follow-up 2, full radiographic fusion was seen in 100%. MOS-SF 36, ONDI and VAS did not show any significant difference between cases with and without subsidence in the two-sample t-test. Only in one type of scoring (painDETECT questionnaire) did a statistically significant difference in t-Test emerge between the two groups (p = 0.03; α = 0.05). However, preoperative painDETECT score differ significantly between patients with subsidence (13.3 falling to 12.6) and patients without subsidence (7.8 dropped to 6.3). The radiological findings indicated 100% healing after stand-alone treatment with ACDF. Subsidence occurred in 50% of the segments treated. No impact on the clinical results was detected in the medium-term study period.

  12. Fashion blogs: a study on how consumers’ attitude to fashion is influenced through fashion blog usage.

    OpenAIRE

    Hauge, Tone

    2010-01-01

    This thesis study: How consumers’ attitudes to fashion are influenced by fashion blog usage. Identifying some characteristics of the a-list fashion bloggers. The variables that are assumed to influence the domain of fashion blogs are expertise, authenticity, authority, social identity, private- and social self image. Fashion blogs was found to be an important source of influence, for some taking over the role of fashion magazines. All the variables studied were foun...

  13. Fashion Merchandising Guide.

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education Services.

    Developed to address the needs of the apparel industry, this fashion merchandising curriculum guide is designed to assist marketing educators in effective instructional delivery. Introductory materials include the following: a course blueprint that illustrates units of instruction, core competencies in each unit, and specific objectives for each…

  14. Fashion, Bodies, and Objects

    Directory of Open Access Journals (Sweden)

    Jean-François Fourny

    1996-06-01

    Full Text Available This essay is based on the assumption that the body has undergone a process of fragmentation that started with "modern" art and commodity fetishism that is being amplified today by an increasingly fetishistic high fashion industry itself relayed by music videos and a gigantic pornography industry. This article begins with a discussion of fetishism and objectification as they appear in high fashion shows where underwear becomes wear (turning the inside into the outside, thus expanding (or dissolving the traditional notion of pornography because they are both reported in comparable terms by mainstream magazines such as Femmes and less conventional publications such as Penthouse . A comparable phenomenon takes place in the novels of Hervé Guibert where internal organs (that is the inside become literary characters (as "outside" through medical imagery. Finally, an issue of the French New Look magazine is analyzed because it features a high fashion collection next to a pictorial/essay on Issei Sagawa, a.k.a. "the Japanese Cannibal." Here again, the objectification of the dismembered body is taken a step further both by designer Jean-Paul Gaultier and Sagawa. It thus appears that the human body is nowadays being totally invested by commodity fetishism, rendering gender difference obsolete and opening a new space that so far has no name, and announces the final merging of high fashion, literature, pornography, and music videos.

  15. FASHION BLOGGERS AS NEW AGENTS OF FASHION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Echevskaya O. G.

    2014-06-01

    Full Text Available The article discusses the emergence and development of fashion blogging phenomenon in Russia. First, we discuss theoretical approaches to the analysis of fashion in sociology are reviewed, and the conceptual framework for understanding the interaction between fashion bloggers and fashion industry. Then, based on the materials of interviews with popular Russian fashion bloggers, we show how, originating from regular private dairies fashion blogs eventually transform into the specialized platform for translation of fashion-related information. Often the status of their owners is perceived as professional in the sphere of fashion. Such bloggers become the active part of the fashion community which allows them to be included into the process of making and transmitting the fashion trends.

  16. Cage subsidence does not, but cervical lordosis improvement does affect the long-term results of anterior cervical fusion with stand-alone cage for degenerative cervical disc disease: a retrospective study.

    Science.gov (United States)

    Wu, Wen-Jian; Jiang, Lei-Sheng; Liang, Yu; Dai, Li-Yang

    2012-07-01

    Clinical outcomes of the stand-alone cage have been encouraging when used in anterior cervical discectomy and fusion (ACDF), but concerns remain regarding its complications, especially cage subsidence. This retrospective study was undertaken to investigate the long-term radiological and clinical outcomes of the stand-alone titanium cage and to evaluate the incidence of cage subsidence in relation to the clinical outcome in the surgical treatment of degenerative cervical disc disease. A total of 57 consecutive patients (68 levels) who underwent ACDF using a titanium box cage for the treatment of cervical radiculopathy and/or myelopathy were reviewed for the radiological and clinical outcomes. They were followed for at least 5 years. Radiographs were obtained before and after surgery, 3 months postoperatively, and at the final follow-up to determine the presence of fusion and cage subsidence. The Cobb angle of C2-C7 and the vertebral bodies adjacent to the treated disc were measured to evaluate the cervical sagittal alignment and local lordosis. The disc height was measured as well. The clinical outcomes were evaluated using the Japanese Orthopaedic Association (JOA) score for cervical myelopathy, before and after surgery, and at the final follow-up. The recovery rate of JOA score was also calculated. The Visual Analogue Scale (VAS) score of neck and radicular pain were evaluated as well. The fusion rate was 95.6% (65/68) 3 months after surgery. Successful bone fusion was achieved in all patients at the final follow-up. Cage subsidence occurred in 13 cages (19.1%) at 3-month follow-up; however, there was no relation between fusion and cage subsidence. Cervical and local lordosis improved after surgery, with the improvement preserved at the final follow-up. The preoperative disc height of both subsidence and non-subsidence patients was similar; however, postoperative posterior disc height (PDH) of subsidence group was significantly greater than of non-subsidence group

  17. VMware Horizon 6 desktop virtualization solutions

    CERN Document Server

    Cartwright, Ryan; Langone, Jason; Leibovici, Andre

    2014-01-01

    If you are a desktop architect, solution provider, end-user consultant, virtualization engineer, or anyone who wants to learn how to plan and design the implementation of a virtual desktop solution based on Horizon 6, then this book is for you. An understanding of VMware vSphere fundamentals coupled with experience in the installation or administration of a VMware environment would be a plus during reading.

  18. Fashion, Mediations & Method Assemblages

    DEFF Research Database (Denmark)

    Sommerlund, Julie; Jespersen, Astrid Pernille

    , respectively. The paper thus takes on aesthetics and the social in a manner closely related to a core argument of STS - namely that the scientific fact, and the social processes of constructing, distributing, and using that fact, are co-constructed (Callon, 1986; Latour, 1993). The paper thus contributes......, it is an important ambition of this paper to go into a methodological discussion of how "that which effectively happens" can be approached. To this end, the paper will combine Hennion's term of the "mediator" with John Laws methodological term of "method assemblages". Method assemblages is a suggested as a way...... of handling multiple, fluid realities with multiple, fluid methods. Empirically, the paper works with mediation in fashion - that is efforts the active shaping of relations between producer and consumer through communication, marketing and PR. Fashion mediation is by no means simple, but organise complex...

  19. A Theory on Fashion Consumption

    OpenAIRE

    Fang Ma; Huijing Shi; Lihua Chen; Yiping Luo

    2012-01-01

    Both the theory of top-down penetration of fashion consumption (Veblen - Simmel model) and the theory of bottom-up fashion consumption have been found consistent with the consumer behavior in the China¡¯s fashion consumer market and the trend of such behavior keeps growing. Therefore, it is necessary to carry out a study on fashion consumption to meet the needs of the development of real life and fashion consumption. Firstly, we describe the content of fashion consumption, discuss the connota...

  20. Chapter 2: Stand-alone Applications - TOPCAT

    Science.gov (United States)

    Miller, C. J.

    Tool for OPerations on Catalogues And Tables or TOPCAT is a graphical viewer for table data. It offers a variety of ways to work with data tables, including a browser for the cell data, viewers for information about table and column metadata, dataset visualization, and even analysis. We discuss a small subset of TOPCAT's functionalities in this chapter. TOPCAT was originally developed as part of the Starlink program in the United Kingdom. It is now maintained by AstroGrid. The program is written in pure Java and available under the GNU General Public License. It is available for download and a version is included in the software distribution accompanying this book. TOPCAT is a GUI interface on top of the STIL library. A command line interface to this library, STILTS, described in Chapter 21 provides scriptable access to many of the capabilities described here. The purpose of this tutorial is to provide an overview of TOPCAT to the novice user. The best place to look for and learn about TOPCAT is the web page maintained by Mark B. Taylor. There, TOPCAT documentation is provided in HTML, PDF, via screen shots, etc. In this chapter we take the user through a few examples that give the general idea of how TOPCAT works. The majority of the functionality of TOPCAT is not included in this short tutorial. Our goal in this tutorial is to lead the reader through an exercise that would result in a publication quality figure (e.g. for a journal article). Specifically, we will use TOPCAT to show how the color-magnitude relation of a galaxy cluster compares to that of all galaxies in the Sloan Digital Sky Survey (York et al. 2000). This diagnostic is used not only in cluster finding, but its linear fit can provide insight into the age and/or metallicity of the oldest galaxies in galaxy clusters (which are some of the oldest galaxies in the Universe). The data we need for this exercise are: 1) the entire spectroscopic galaxy catalog from the SDSS, with galaxy positions, galaxy redshifts, and galaxy magnitudes and 2) galaxy members of a known galaxy cluster. For the former, we will download data directly from the SDSS servers to our local machine for analysis. For the latter, we will use TOPCAT's ability to call live cone search services.

  1. Informing Approaches in Establishing Stand Alone Community ...

    African Journals Online (AJOL)

    Literacy is usually considered the ability to read at a basic level. Now it is beginning to be defined more broadly to include applying reading, writing, and mathematical skills to obtain and use information and solve problems at levels of proficiency necessary to function in society, to achieve one's goals and develop one's ...

  2. Stand Alone Battery Thermal Management System

    Energy Technology Data Exchange (ETDEWEB)

    Brodie, Brad [Denso International America, Incorporated, Southfield, MI (United States)

    2015-09-30

    The objective of this project is research, development and demonstration of innovative thermal management concepts that reduce the cell or battery weight, complexity (component count) and/or cost by at least 20%. The project addresses two issues that are common problems with current state of the art lithium ion battery packs used in vehicles; low power at cold temperatures and reduced battery life when exposed to high temperatures. Typically, battery packs are “oversized” to satisfy the two issues mentioned above. The first phase of the project was spent making a battery pack simulation model using AMEsim software. The battery pack used as a benchmark was from the Fiat 500EV. FCA and NREL provided vehicle data and cell data that allowed an accurate model to be created that matched the electrical and thermal characteristics of the actual battery pack. The second phase involved using the battery model from the first phase and evaluate different thermal management concepts. In the end, a gas injection heat pump system was chosen as the dedicated thermal system to both heat and cool the battery pack. Based on the simulation model. The heat pump system could use 50% less energy to heat the battery pack in -20°C ambient conditions, and by keeping the battery cooler at hot climates, the battery pack size could be reduced by 5% and still meet the warranty requirements. During the final phase, the actual battery pack and heat pump system were installed in a test bench at DENSO to validate the simulation results. Also during this phase, the system was moved to NREL where testing was also done to validate the results. In conclusion, the heat pump system can improve “fuel economy” (for electric vehicle) by 12% average in cold climates. Also, the battery pack size, or capacity, could be reduced 5%, or if pack size is kept constant, the pack life could be increased by two years. Finally, the total battery pack and thermal system cost could be reduced 5% only if the system is integrated with the vehicle cabin air conditioning system. The reason why we were not able to achieve the 20% reduction target is because of the natural decay of the battery cell due to the number of cycles. Perhaps newer battery chemistries that are not so sensitive to cycling would have more potential for reducing the battery size due to thermal issues.

  3. Stand alone biofuel production from algae

    NARCIS (Netherlands)

    Wijffels, R.H.; Janssen, M.G.J.; Barbosa, M.J.

    2011-01-01

    In this feature, leading researchers in the field of microbial biotechnology speculate on the technical and conceptual developments that will drive innovative research and open new vistas over the next few years

  4. Stand-alone tsunami alarm equipment

    Science.gov (United States)

    Katsumata, Akio; Hayashi, Yutaka; Miyaoka, Kazuki; Tsushima, Hiroaki; Baba, Toshitaka; Catalán, Patricio A.; Zelaya, Cecilia; Riquelme Vasquez, Felipe; Sanchez-Olavarria, Rodrigo; Barrientos, Sergio

    2017-05-01

    One of the quickest means of tsunami evacuation is transfer to higher ground soon after strong and long ground shaking. Ground shaking itself is a good initiator of the evacuation from disastrous tsunami. Longer period seismic waves are considered to be more correlated with the earthquake magnitude. We investigated the possible application of this to tsunami hazard alarm using single-site ground motion observation. Information from the mass media is sometimes unavailable due to power failure soon after a large earthquake. Even when an official alarm is available, multiple information sources of tsunami alert would help people become aware of the coming risk of a tsunami. Thus, a device that indicates risk of a tsunami without requiring other data would be helpful to those who should evacuate. Since the sensitivity of a low-cost MEMS (microelectromechanical systems) accelerometer is sufficient for this purpose, tsunami alarm equipment for home use may be easily realized. Amplitude of long-period (20 s cutoff) displacement was proposed as the threshold for the alarm based on empirical relationships among magnitude, tsunami height, hypocentral distance, and peak ground displacement of seismic waves. Application of this method to recent major earthquakes indicated that such equipment could effectively alert people to the possibility of tsunami.

  5. The price of fast fashion

    Science.gov (United States)

    2018-01-01

    The fashion industry has changed rapidly in recent years with the increased prevalence of fast fashion, impacting the environment. Efforts to green this polluting industry require action from businesses and consumers.

  6. The fashion blog as genre

    DEFF Research Database (Denmark)

    Engholm, Ida; Hansen-Hansen, Erik

    2013-01-01

    Fashion as a phenomenon cannot be understood indepen- dently of the visual images and designed presentations that convey the content and forms of fashion. With the breakthrough of the digital media in the 2000s we were introduced to new ways of communicating and staging fashion where the blog...... in particular has established a new media culture for the distribution and exchange of potential fashion-based self-presentation forms and resulted in new design strategies. In this article, the fashion blog is presented as a specific genre that is charac- terised by remediating existing genre forms and combin......- ing them into new formats, where amateur bricolage approaches are combined with the reproduction of fam- iliar features from the established fashion media. The article presents four types of fashion blogs, each represent- ing a specific design strategy for presenting and interact- ing with fashion...

  7. Public open space desktop auditing tool

    DEFF Research Database (Denmark)

    Mygind, Lærke; Bentsen, Peter; Badland, Hannah

    2016-01-01

    Features of public open space (POS) have traditionally been described using on-site direct observation, but recently, low-cost and time-efficient remote desktop auditing tools have been developed. We adapted an existing, validated desktop auditing tool (the Public Open Space Desktop Auditing Tool......: POSDAT) and tested it in a pilot sample of regional and metropolitan settings in Victoria, Australia. Using Google Maps and Street View, local government webpages, the National Public Toilet Registry and spatial data, we captured POSDAT items in 171 POS across 17 suburbs, of which 9 were regional. POSDAT...... resolution Google Street View imagery available for some outer regional areas and the inconsistency of detail in information on local government webpages hindered a consistent assessment of POS. Thus, POSDAT, based on the spatial data applied in this study, is appropriate for use in metropolitan...

  8. Marketing communication through fashion blog

    OpenAIRE

    Drozdová, Natália

    2017-01-01

    The bachelor thesis studies the usage of fashion blogs in the marketing communication. It brings the view of the fact how fashion blogs are perceived by their readers and how readers are influenced by fashion blogs. The theoretical part of the thesis describes marketing communication, communication process, communication mix and online marketing. It is followed by characteristics of blogs and social networks. The practical part is dealt with the description of how my own fashion blog works an...

  9. The fashion blog as genre

    DEFF Research Database (Denmark)

    Engholm, Ida; Hansen-Hansen, Erik

    2013-01-01

    - ing them into new formats, where amateur bricolage approaches are combined with the reproduction of fam- iliar features from the established fashion media. The article presents four types of fashion blogs, each represent- ing a specific design strategy for presenting and interact- ing with fashion...

  10. Marketing modest fashion or fashioning modesty? HijUp Unveiled at London Fashion Week

    OpenAIRE

    Wilson, Jonathan

    2016-01-01

    The Indonesians came, they saw and we learned more about their spicy blend of fashion and fun, in the streets of London. Here’s a slice of what’s going on in the emerging global Modest Fashion scene.

  11. The international phase 4 validation study of the EORTC QLQ-SWB32: A stand-alone measure of spiritual well-being for people receiving palliative care for cancer.

    Science.gov (United States)

    Vivat, B; Young, T E; Winstanley, J; Arraras, J I; Black, K; Boyle, F; Bredart, A; Costantini, A; Guo, J; Irarrazaval, M E; Kobayashi, K; Kruizinga, R; Navarro, M; Omidvari, S; Rohde, G E; Serpentini, S; Spry, N; Van Laarhoven, H W M; Yang, G M

    2017-11-01

    The EORTC Quality of Life Group has just completed the final phase (field-testing and validation) of an international project to develop a stand-alone measure of spiritual well-being (SWB) for palliative cancer patients. Participants (n = 451)-from 14 countries on four continents; 54% female; 188 Christian; 50 Muslim; 156 with no religion-completed a provisional 36-item measure of SWB plus the EORTC QLQ-C15-PAL (PAL), then took part in a structured debriefing interview. All items showed good score distribution across response categories. We assessed scale structure using principal component analysis and Rasch analysis, and explored construct validity, and convergent/divergent validity with the PAL. Twenty-two items in four scoring scales (Relationship with Self, Relationships with Others, Relationship with Someone or Something Greater, and Existential) explained 53% of the variance. The measure also includes a global SWB item and nine other items. Scores on the PAL global quality-of-life item and Emotional Functioning scale weakly-moderately correlated with scores on the global SWB item and two of the four SWB scales. This new validated 32-item SWB measure addresses a distinct aspect of quality-of-life, and is now available for use in research and clinical practice, with a role as both a measurement and an intervention tool. © 2017 John Wiley & Sons Ltd.

  12. Fashion Research at Design Schools

    DEFF Research Database (Denmark)

    Skjold, Else

    2008-01-01

    on fashion education and fashion research, that are “taken for granted” in the institutional culture of each case. Because of the diversity between the cases, a cultural-oriented comparison has been made, where every case is perceived as idiographically unique (Thyge Winther-Jensen 2004). Descriptions......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

  13. Thomas Jefferson, Page Design, and Desktop Publishing.

    Science.gov (United States)

    Hartley, James

    1991-01-01

    Discussion of page design for desktop publishing focuses on the importance of functional issues as opposed to aesthetic issues, and criticizes a previous article that stressed aesthetic issues. Topics discussed include balance, consistency in text structure, and how differences in layout affect the clarity of "The Declaration of…

  14. Desktop Virtualization in Action: Simplicity Is Power

    Science.gov (United States)

    Fennell, Dustin

    2010-01-01

    Discover how your institution can better manage and increase access to instructional applications and desktops while providing a blended learning environment. Receive practical insight into how academic computing virtualization can be leveraged to enhance education at your institution while lowering Total Cost of Ownership (TCO) and reducing the…

  15. Aquatic Habitats: Exploring Desktop Ponds. Teacher's Guide.

    Science.gov (United States)

    Barrett, Katharine; Willard, Carolyn

    This book, for grades 2-6, is designed to provide students with a highly motivating and unique opportunity to investigate an aquatic habitat. Students set up, observe, study, and reflect upon their own "desktop ponds." Accessible plants and small animals used in these activities include Elodea, Tubifex worms, snails, mosquito larvae, and fish.…

  16. Architectural Desktop : release 3.3

    DEFF Research Database (Denmark)

    Skauge, Jørn

    2002-01-01

    Øvelser i ADT's mest grundlæggende dele på basis af modellering af et lille og simpelt hus. Der arbejdes primært med værktøjerne i designdelens menu. 1. udgave med titel: Architectural Desktop (Fiskers hus). 2002. 60 sider....

  17. Fashion Magazines and Fashion as a System of Magic

    OpenAIRE

    Moeran, Brian

    2016-01-01

    This article is about international women’s fashion magazines―specifically Elle, Harper’s Bazaar, Marie Claire and Vogue―and the part they play in creating and sustaining the fashion industry as a system of magic. That it is indeed a system may be seen in the fact that, as with other systems of magic, the fashion industry makes use of magicians, magical rites, and magical representations.

  18. Alternative route of process modification for biofuel production by embedding the Fischer-Tropsch plant in existing stand-alone power plant (10 MW) based on biomass gasification - Part I: A conceptual modeling and simulation approach (a case study in Thailand)

    DEFF Research Database (Denmark)

    Hunpinyo, Piyapong; Cheali, Peam; Narataruksa, Phavanee

    2014-01-01

    The utilization of syngas shows a highly potential to improve the economic potential of the stand-alone power unit-based gasification plants as well as enhancing the growing demand of transportation fuels. The thermochemical conversion of biomass via gasification to heat and power generations from...

  19. Fashion Research at Design Schools

    DEFF Research Database (Denmark)

    Skjold, Else

    2008-01-01

    The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative......, interactionistic interviews (Järvinen and Mik-Meyer, 2005) with key persons from the respective research- and fashion departments from eight selected design schools in Holland, England and USA. The analysis of each case is inspired by Edgar E. Schein’s levels of culture (Schein 1994), that aims to pinpoint both...

  20. Metaphors in Fashion Magazine "Vogue"

    OpenAIRE

    Kravale, Jana

    2008-01-01

    The present paper investigates the use of metaphors in media discourse, in particular their role in the fashion magazine Vogue. The purpose of the research paper is to prove that metaphors are frequent stylistic devices that are used to enrich the language of journalistic articles in the fashion magazine Vogue and are central to the way we think about the world. The theoretical research methods comprise the explanation of media discourse in the context of fashion, the theory of functional lan...

  1. Poster - Thurs Eve-17: Stand alone software for deforming delivered dose distributions to account for daily anatomical variations in prostate patients treated on the TomoTherapy Hi-Art II system.

    Science.gov (United States)

    Rivest, R; Riauka, T; Murtha, A; Fallone, G

    2008-07-01

    The acquisition of daily megavoltage (MV)-CT images provides an invaluable tool in the delivery of adaptive radiotherapy (ART) on the TomoTherapy Hi-ART II system. Using TomoTherapy's Planned Adaptive software, delivery sinograms can be applied to pre-treatment MVCT images to generate daily delivered dose distributions, allowing for the potential comparison of planned and delivered doses. However, daily patient anatomical variations complicate the task and accurate comparison requires that daily doses be evaluated in the same references frame as the planned dose. Each anatomical point in daily MVCT images must be mapped to its corresponding point in the patient planning CT and that deformation map must be applied to the daily dose distribution. Stand alone software has been developed for the comparison of planned and delivered doses for TomoTherapy prostate patients. Software inputs are the planning CT, planning structure data, planned dose distribution, daily MVCT and delivered dose distribution. The software uses an in-house developed automatic voxel-based deformable registration algorithm designed and optimized specifically for the registration of prostate CT images to achieve anatomical correspondence between MVCT and planning images. The resultant deformation map is applied to the daily dose distribution and the software outputs the deformed daily dose distribution in the planning CT's reference frame, as well as a delivered DVH for each of the planning CT's ROI. The software allows for a number of potential research opportunities, in particular, the calculation of the cumulative dose delivered over the course of treatment for prostate patients treated on the Hi-Art II system. © 2008 American Association of Physicists in Medicine.

  2. Sustainability in Fashion Business Operations

    Directory of Open Access Journals (Sweden)

    Tsan-Ming Choi

    2015-11-01

    Full Text Available Under the global trend of sustainability, many companies selling fashion products have to reshape their operational strategies. Over the past few years, we have witnessed many fashion companies going green by re-engineering their business processes and establishing their formal sustainability programs. Many important topics, such as closed-loop supply chain management, corporate social responsibility, and economic sustainability, are all related to sustainable fashion business operations management. This paper provides a brief review of these critical topics, introduces the special issue, and proposes future research areas to achieve sustainable operations management in the fashion business.

  3. ETHICAL FASHION CONCEPT AND DESIGNERS

    Directory of Open Access Journals (Sweden)

    Pinar GOKLUBERK OZLU

    2015-01-01

    Full Text Available Some problems like rapidly developing industrialization, irregular population growth, environmental pollution and to feel the impact of global warming as seriously, has been giving significant damage to the earth. People has realized that, after polluting to clean is harder than polluting of the measures to be taken before. And again people showed the sensitivity to the environment through different reactions and sanctions, took measures and created the new concepts about the enviroment. "Ethical Fashion" concept was created by the conscious and responsible individuals in the last two decades. However, that are being implemented as a concept is noticeable. Textile and fashion industry cover "Ethical Fashion"; ecological product, working conditions, fair trade and sustainable product are all in that concept. "Ethical Fashion" appeared and developed especially in United Kingdom, the USA and the other European countries. Nowadays, we may see a lot of textile and fashion designers, fabric and clothing collections, fairs and some specific courses at the universities about "Ethical Fashion". In this research contains "Ethical Fashion" concept, it's development processes and fashion designers who is working for this concept at the present time, also the main target is in this research, semtinizing "Ethical Fashion" concept.

  4. Fashion Research at Design Schools

    DEFF Research Database (Denmark)

    Skjold, Else

    2008-01-01

    The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key......, interactionistic interviews (Järvinen and Mik-Meyer, 2005) with key persons from the respective research- and fashion departments from eight selected design schools in Holland, England and USA. The analysis of each case is inspired by Edgar E. Schein’s levels of culture (Schein 1994), that aims to pinpoint both...

  5. KLIMT, FROM PAINTING TO FASHION

    Directory of Open Access Journals (Sweden)

    URDEA Olimpia

    2015-05-01

    Full Text Available Fashion has been a subject for most fields of art, starting from visual arts to cinema and literature. The metamorphoses of fashion, an art in itself, are under the sign of history that marked the social during the evolution of humanity. The present paper makes a reference to the links between fashion and Klimt’s work. Klimt proved to be a visionary by means of his visual, unique and unmistakable signature concerning the way he treated the clothed woman. As he worshipped the female body, he portrayed it, reflecting the fashion style of an era that was meant to be renewed. His work, strongly influenced by feminine values, became conspicuous as a manifesto against the rigidity of the Viennese society in the late nineteenth century and early twentieth century. The modernity of Klimt’s vision generated the metamorphosis of the woman model, from the corseted woman until that time, and not only in terms of fashion, to the freed woman, using the metaphorical instruments of his art. The artist’s complex creativity helps us find him in four different situations, all in close connection with fashion art: the painter Klimt, who portrays woman who shows herself by showing her garment; the fashion designer Klimt who suggests outfits for his collaborator, Emilie Flöge, remoulding the dress as a clothing item; the fashion photographer from the photographs of Emilie Flöge wearing his creations; and, indirectly, by his paintings from the cycle Women, which had a powerful impact on contemporary fashion. Such a complex, visionary creator, whose painting and fashion interfere, is worth mentioning for his contribution to the fashion art avatars.

  6. Remote desktop with HTML5 technology

    OpenAIRE

    Banič, Žiga

    2013-01-01

    In our thesis we implemented a remote desktop with the newest technology HTML5. The main reason we choose this technology is to access the system through many different computing platforms. Present web browsers take care for the right support of using before mentioned technology. With the new element canvas we can manipulate and display the remote computer. To manipulate the system we just add event listeners for mouse, keyboard and touch events on the element. Technology WebSockets served as...

  7. Fashion Counterfeiting: Consumer Behavior Issues

    Science.gov (United States)

    Cheek, Wanda K.; Easterling, Cynthia R.

    2008-01-01

    Counterfeiting, which has always been somewhat of a problem in several different industry settings, has recently become an epidemic in the fashion industry. Widespread and seemingly endless counterfeiting of fashion goods is costing the industry millions of dollars in lost profits and tarnishing the image of many luxury brands. This article…

  8. Fashion Arts. Curriculum RP-54.

    Science.gov (United States)

    Ontario Dept. of Education, Toronto.

    GRADES OR AGES: Grades 11 and 12. SUBJECT MATTER: Fashion arts and marketing. ORGANIZATION AND PHYSICAL APPEARANCE: The guide is divided into two main sections, one for fashion arts and one for marketing, each of which is further subdivided into sections for grade 11 and grade 12. Each of these subdivisions contains from three to six subject…

  9. The fashion blog as genre

    DEFF Research Database (Denmark)

    Engholm, Ida; Hansen-Hansen, Erik

    2013-01-01

    in particular has established a new media culture for the distribution and exchange of potential fashion-based self-presentation forms and resulted in new design strategies. In this article, the fashion blog is presented as a specific genre that is charac- terised by remediating existing genre forms and combin...

  10. Analyst productivity and the RELAP5 desktop analyzer

    International Nuclear Information System (INIS)

    Beelman, R.J.

    1989-01-01

    Historically, the productivity of a numerical reactor safety analyst has been hampered by several factors: poor mainframe computer turnaround for problem setup, checkout, and initialization; limited mainframe CPU allocation, accessibility and availability for transient advancement; lost or delayed output; and difficulty assimilating numerical results. Clearly, an economical engineering workstation capable of running RELAP5 interactively, and of simultaneously displaying the results in a coherent graphic fashion as they are produced, would alleviate many of these concerns. The RELAP5 desktop analyzer (RDA) is such a workstation. Although not yet capable of real-time simulation, the RDA will nevertheless reduce analysis costs and enhance analyst productivity since analysis cannot be done in real time anyway. The RDA is a microcomputer-based reactor transient simulation, visualization, and analysis tool developed at the Idaho National Engineering Laboratory (INEL) to assist an analyst in simulating and evaluating the transient behavior of nuclear power plants. The RDA integrates RELAP5 advanced best-estimate engineering simulation capabilities with on-line computer graphics routines allowing interactive reactor plant transient simulation and on-line analysis of results, or replay of past simulations, by means of graphic displays

  11. STAND-ALONE WIND ENERGY CONVERSION SYSTEM WITH MAXIMUM POWER TRANSFER CONTROL SISTEMA AISLADO DE CONVERSIÓN EÓLICA CON CONTROL DE MÁXIMA TRANSFERENCIA DE POTENCIA

    Directory of Open Access Journals (Sweden)

    Miguel López

    2009-12-01

    Full Text Available A controlled wind generation system for a stand alone application is presented in this paper. A cascaded step-up/step-down power electronic converters topology is proposed to control the wind power system in the whole wind speed range. For the low wind speed range, the control strategy is aimed to follow the wind turbine’s maximal power coefficient by adjusting the generator’s rotational speed. For high wind speeds, the system power regulation is also made by controlling the generator speed. This control is made by the DC/DC power electronic converter, which modifies its input voltage, changing the machine voltage and consequently varying the generator’s rotor speed. The proposed system is validated by computer simulation. The proposed control system shows a good performance for its application in autonomous wind energy systems.Un sistema de generación eólica para una aplicación aislada es presentado en este artículo. Una topología de convertidores electrónicos de potencia elevador y reductor conectados en cascada es propuesta para controlar la producción eólica en todo el rango de velocidades del viento. Para el rango de vientos suaves, la estrategia de control permite seguir el máximo coeficiente de potencia de turbina eólica mediante el ajuste de la velocidad de rotación del generador. En el rango de vientos fuertes, la regulación de la potencia del sistema se hace igualmente por control de la velocidad de giro del generador. La acción de control es realizada mediante el convertidor DC/DC de potencia el cual modifica su tensión de entrada, cambiando así la tensión en los terminales de la máquina y por consecuencia variando la velocidad de rotación del generador. El sistema propuesto es validado mediante simulación por computador. Los resultados muestran que el sistema de control propuesto actúa de buena manera para su aplicación en sistemas autónomos de generación eólica.

  12. Big data in fashion industry

    Science.gov (United States)

    Jain, S.; Bruniaux, J.; Zeng, X.; Bruniaux, P.

    2017-10-01

    Significant work has been done in the field of big data in last decade. The concept of big data includes analysing voluminous data to extract valuable information. In the fashion world, big data is increasingly playing a part in trend forecasting, analysing consumer behaviour, preference and emotions. The purpose of this paper is to introduce the term fashion data and why it can be considered as big data. It also gives a broad classification of the types of fashion data and briefly defines them. Also, the methodology and working of a system that will use this data is briefly described.

  13. Towards Fashion Media for Sustainability

    DEFF Research Database (Denmark)

    Skjold, Else

    2015-01-01

    Throughout the chapter, it is pointed out how fashion media traditionally fuel on unsustainable imbalances of self, in terms of affluence, gender, ethnicity, body types and age. The chapter opens with a historic outline. Here, the close alliance between media and industry is problematized, whilst...... at the same time it is highlighted how these media have produced some of the most significant imagery of modern times. Pushing the envelope of this format, Skjold suggests how fashion art magazine and user-generated style magazines might hold the key for new templates challenging existing hegemony, this way...... establishing more sustainable fashion media in the future....

  14. Fashion designers on the Czech market

    OpenAIRE

    Hinková, Barbora

    2014-01-01

    This Master's Thesis deals with the Czech fashion scene. Development of fashion is outlined in the introduction. It should help to understand the whole market. The work deals with marketing of fashion brands and focuses primarily on marketing Czech fashion brands offering fashions for women. Czech fashion scene is analyzed in detail and pointed out the weaknesses that need to be improved. In connection with the findings outlined here is a solution that should help Czech fashion scene.

  15. Fashion and death: Trends Cycles

    Directory of Open Access Journals (Sweden)

    Flavia Jakemiu Araújo Bortolon

    2016-12-01

    Full Text Available Fashion is composed of cycles subpostos trends that seek to eliminate the past for a new one, which makes it ephemeral and eternal at the same time. This study investigates how is the relationship between these cycles of trends over time, through a brief history of fashion, considering the theoretical rules of Simmel, Crane and Caldas. They will still be used concepts proposed by Agamben, such as: device, in order to classify the system of the fashion; contemporaneidade, to understand the action of that factor in relation to the time and profanation, to identify the capacity to maintain in the society. It is ended that the fashion, as well as the death, renews the society, it destroys and it creates the new, as a system naturalized artificially

  16. Fashion Sustainability” Inverstigated

    DEFF Research Database (Denmark)

    Gwozdz, Wencke; Gupta, Shipra; Gentry, Jim

    2015-01-01

    This manuscript takes a macro perspective of consumer satisfaction in order to investigate whether one can argue that consumer satisfaction with the apparel industry may compensate in a cost/benefit sense for the environmental harm caused by the production, maintenance, and disposal of apparel. We...... make the case that style orientations lead to more sustainable patterns than do fashion orientations. Consumers aged 16-35 were surveyed in national surveys in five countries as to their apparel usage, their fashion versus style orientations, their perspectives of sustainable fashion, and their quality...... of life in a variety of domains. We hypothesize that older consumers will be more style-oriented than younger consumers, and that style-orientation will be associated with higher levels of quality of life than fashion-orientation....

  17. Brand placements in fashion TV series

    NARCIS (Netherlands)

    Fakkert, M.-S.; Voorveld, H.A.M.; van Reijmersdal, E.A.; Banks, I.B.; De Pelsmacker, P.; Okazaki, S.

    2015-01-01

    Recently Fashion TV series have gained more and more popularity among young women worldwide (Dehnart 2008; Seidman 2010). Fashion TV series are an immensely popular TV genre portraying the world of fashion and the accompanying glamorous lifestyle.

  18. Introduction to Fashion Buying. Teacher Edition. Fashion Buying Series.

    Science.gov (United States)

    Collins, Cindy

    This teacher's guide presents material for a unit on introduction to fashion buying. Content focuses on information sources, retail store types, the responsibilities of a buyer, and the qualifications of a buyer. The guide contains 4 objectives, 4 group learning activities keyed to the objectives, 17 transparency masters with dialogue for each,…

  19. WEARABLE TECHNOLOGY: FASHION DESIGNERS BRINGS TOGETHER FASHION WITH SCIENCE

    Directory of Open Access Journals (Sweden)

    Gozde Yetmen

    2017-04-01

    Full Text Available In this paper, from the designers, engineers, scientists and technicians are working multidisciplinary and developed in process of time; electronic textiles, smart textiles, nano technology, 3D printed textiles and coded couture. As a result today generated "Wearable Technology". Designer creates contemporary fashion design products and concepts will be examined in this paper. Since the mid-twentieth century, to today’s XXI Century, living an important technological development for the future of fashion is to ensure the creation of high tech fabrics with functional textile fibers. 21st Century avant-garde fashion designers: Hussein Chalayan, Ryan Genz & Francesca Rosella and Anouk Wipprecht are working on the future garment design and determine a new visions that the texture of the emerging trends and technologies in the area of fashion. They realized that the importance of innovation in their collections. For this reason, textile engineers and scientists are working together and investigating various technologies to develop a variety of innovative fabrics or garments.

  20. Aso Ebi: Fashioning self through photography and 'fashion ...

    African Journals Online (AJOL)

    In Nigeria, fashion and photography have become powerful forces in the construction of self. In this essay, I see photographers as central players in this development, and I examine the intersections of aso ebi, photography and popular media consumption - in the form of popular magazines - in Lagos. The essay argues that ...

  1. Overall Insight into the Fashion Business

    OpenAIRE

    Hagelberg, Laura

    2015-01-01

    The aim of this thesis is to examine today’s fashion from a business perspective. In this thesis fashion business is examined through fashion history, fashion industry and life cycle, today’s fast fashion and also consumer behavior in fashion. This thesis is conducted for a Finnish fashion business, InStyle. InStyle is a family based fashion business operating mainly via online and monthly trade fairs. There is also a physical store in Savonlinna which sells InStyle brands. Though the ow...

  2. Citrix XenApp 7.5 desktop virtualization solutions

    CERN Document Server

    Paul, Andy

    2014-01-01

    If you are a Citrix® engineer, a virtualization consultant, or an IT project manager with prior experience of using Citrix XenApp® and related technologies for desktop virtualization and want to further explore the power of XenApp® for flawless desktop virtualization, then this book is for you.

  3. Desktop supercomputer: what can it do?

    Science.gov (United States)

    Bogdanov, A.; Degtyarev, A.; Korkhov, V.

    2017-12-01

    The paper addresses the issues of solving complex problems that require using supercomputers or multiprocessor clusters available for most researchers nowadays. Efficient distribution of high performance computing resources according to actual application needs has been a major research topic since high-performance computing (HPC) technologies became widely introduced. At the same time, comfortable and transparent access to these resources was a key user requirement. In this paper we discuss approaches to build a virtual private supercomputer available at user's desktop: a virtual computing environment tailored specifically for a target user with a particular target application. We describe and evaluate possibilities to create the virtual supercomputer based on light-weight virtualization technologies, and analyze the efficiency of our approach compared to traditional methods of HPC resource management.

  4. Clinical evaluation of a desktop robotic assistant.

    Science.gov (United States)

    Hammel, J; Hall, K; Lees, D; Leifer, L; Van der Loos, M; Perkash, I; Crigler, R

    1989-01-01

    A desktop vocational assistant robotic workstation was evaluated by 24 high-level quadriplegics from the Palo Alto Veterans Affairs Spinal Cord Injury Center. The system is capable of performing daily living and vocational activities for individuals with high-level quadriplegia via voice control. Subjects were asked to use the robot to perform a repertoire of daily living activities, including preparing a meal and feeding themselves, washing their face, shaving, and brushing teeth. Pre- and post-test questionnaires, interviews, and observer assessments were conducted to determine the quality of the robot performance and the reaction of the disabled users toward this technology. Results of the evaluations were generally positive and demonstrated the usefulness of this technology in assisting high-level quadriplegics to perform daily activities and to gain a modicum of independence and privacy in their lives.

  5. GREEN SUPERCOMPUTING IN A DESKTOP BOX

    Energy Technology Data Exchange (ETDEWEB)

    HSU, CHUNG-HSING [Los Alamos National Laboratory; FENG, WU-CHUN [NON LANL; CHING, AVERY [NON LANL

    2007-01-17

    The computer workstation, introduced by Sun Microsystems in 1982, was the tool of choice for scientists and engineers as an interactive computing environment for the development of scientific codes. However, by the mid-1990s, the performance of workstations began to lag behind high-end commodity PCs. This, coupled with the disappearance of BSD-based operating systems in workstations and the emergence of Linux as an open-source operating system for PCs, arguably led to the demise of the workstation as we knew it. Around the same time, computational scientists started to leverage PCs running Linux to create a commodity-based (Beowulf) cluster that provided dedicated computer cycles, i.e., supercomputing for the rest of us, as a cost-effective alternative to large supercomputers, i.e., supercomputing for the few. However, as the cluster movement has matured, with respect to cluster hardware and open-source software, these clusters have become much more like their large-scale supercomputing brethren - a shared (and power-hungry) datacenter resource that must reside in a machine-cooled room in order to operate properly. Consequently, the above observations, when coupled with the ever-increasing performance gap between the PC and cluster supercomputer, provide the motivation for a 'green' desktop supercomputer - a turnkey solution that provides an interactive and parallel computing environment with the approximate form factor of a Sun SPARCstation 1 'pizza box' workstation. In this paper, they present the hardware and software architecture of such a solution as well as its prowess as a developmental platform for parallel codes. In short, imagine a 12-node personal desktop supercomputer that achieves 14 Gflops on Linpack but sips only 185 watts of power at load, resulting in a performance-power ratio that is over 300% better than their reference SMP platform.

  6. International fashion franchise in Finland

    OpenAIRE

    Vu, Phuong

    2015-01-01

    The study concentrates on exploring international clothing franchise and particularly international clothing franchise in Finland. The main objective of the research is to discover obstacles Finnish franchisees encounter when bringing an international fashion franchise to Finland and recommendations that are beneficial to their success. The thesis is inclined to exploit aspects concerning franchisees’ perspectives. In the literature review, main concepts presented are franchising, franchi...

  7. Creativity in Fashion Design Students

    Science.gov (United States)

    Robinson, Joyce Robin

    2011-01-01

    The purpose of this study was to examine relationships among environmental influences, changes in domain specific knowledge, and changes in tolerance of ambiguity as well as changes in creativity of individuals majoring in fashion design at four-year universities. This study was based on the confluence theoretical approach which holds that…

  8. Fashion, cooperation, and social interactions.

    Directory of Open Access Journals (Sweden)

    Zhigang Cao

    Full Text Available Fashion plays such a crucial rule in the evolution of culture and society that it is regarded as a second nature to the human being. Also, its impact on economy is quite nontrivial. On what is fashionable, interestingly, there are two viewpoints that are both extremely widespread but almost opposite: conformists think that what is popular is fashionable, while rebels believe that being different is the essence. Fashion color is fashionable in the first sense, and Lady Gaga in the second. We investigate a model where the population consists of the afore-mentioned two groups of people that are located on social networks (a spatial cellular automata network and small-world networks. This model captures two fundamental kinds of social interactions (coordination and anti-coordination simultaneously, and also has its own interest to game theory: it is a hybrid model of pure competition and pure cooperation. This is true because when a conformist meets a rebel, they play the zero sum matching pennies game, which is pure competition. When two conformists (rebels meet, they play the (anti- coordination game, which is pure cooperation. Simulation shows that simple social interactions greatly promote cooperation: in most cases people can reach an extraordinarily high level of cooperation, through a selfish, myopic, naive, and local interacting dynamic (the best response dynamic. We find that degree of synchronization also plays a critical role, but mostly on the negative side. Four indices, namely cooperation degree, average satisfaction degree, equilibrium ratio and complete ratio, are defined and applied to measure people's cooperation levels from various angles. Phase transition, as well as emergence of many interesting geographic patterns in the cellular automata network, is also observed.

  9. Fashion, Cooperation, and Social Interactions

    Science.gov (United States)

    Cao, Zhigang; Gao, Haoyu; Qu, Xinglong; Yang, Mingmin; Yang, Xiaoguang

    2013-01-01

    Fashion plays such a crucial rule in the evolution of culture and society that it is regarded as a second nature to the human being. Also, its impact on economy is quite nontrivial. On what is fashionable, interestingly, there are two viewpoints that are both extremely widespread but almost opposite: conformists think that what is popular is fashionable, while rebels believe that being different is the essence. Fashion color is fashionable in the first sense, and Lady Gaga in the second. We investigate a model where the population consists of the afore-mentioned two groups of people that are located on social networks (a spatial cellular automata network and small-world networks). This model captures two fundamental kinds of social interactions (coordination and anti-coordination) simultaneously, and also has its own interest to game theory: it is a hybrid model of pure competition and pure cooperation. This is true because when a conformist meets a rebel, they play the zero sum matching pennies game, which is pure competition. When two conformists (rebels) meet, they play the (anti-) coordination game, which is pure cooperation. Simulation shows that simple social interactions greatly promote cooperation: in most cases people can reach an extraordinarily high level of cooperation, through a selfish, myopic, naive, and local interacting dynamic (the best response dynamic). We find that degree of synchronization also plays a critical role, but mostly on the negative side. Four indices, namely cooperation degree, average satisfaction degree, equilibrium ratio and complete ratio, are defined and applied to measure people’s cooperation levels from various angles. Phase transition, as well as emergence of many interesting geographic patterns in the cellular automata network, is also observed. PMID:23382799

  10. Traditional, fashion and new perspective on fashion tourism

    Science.gov (United States)

    Montazer, Z.; Zare Bidoki, F.

    2017-10-01

    Have you ever heard about Iranian needlework? The needlework of Iran have always been the sign of love, patience and activation. This art that ornaments the surface of fabric with colourful yarns, uses needle is considered as one of the widest branches of handicrafts. Nowadays there are at least 42 branches of needleworks in Iran and among these, the Zoroastrian embroidery is the oldest one. We try to make a new perspective on this art by quickening this beautiful art and designing it on modern fabrics and also combining it with fashion tourism. Iran has a touristic potential in culture, because of its rich, mysteries history and every year thousands of tourists come to Iran to know more about human history and as Yazd is the main region of Zoroastrians occupation that every year attract many tourists and also is famous for its textiles so we start our study in this city. The conclusion of the study emphasized the fact that there is room for the fashion industry to open the new contribution to tourism in Yazd State. However, this depends on the development of a separate frame work for fashion tourism in Iran

  11. Design Enriches Life,Life Breeds Fashion

    Directory of Open Access Journals (Sweden)

    Yun Gong

    2016-11-01

    Full Text Available As society advances and technology changes,fashion design has developed from the initial few exclusive to public demand, and fashion category also covers all walks of life, extends to every area from a single demand to industrialization. Fashion design development, has become an indispensable part of people's lives. Fashion satisfies public demand, reflecting the public interest towards, and designer correctly grasp of fashion and taste of popular motivated the design of continuous innovation to creating new business value, cultural values of the social value of fashion. A precise definition to fashion is hard, cause too broad as it relates to areas, such as products, clothing, entertainment, advertising, decoration, home, fashion is reach into every aspect of our lives. Fashion derived from life elements, convergence elements of era and innovation into your life all over again, this cycle forward and updated, fully embodies the understanding of art and life. Design enriches life, life gave birth to fashion.

  12. Fashion marketing in textile and clothing industry

    OpenAIRE

    Alica Grilec Kaurić

    2009-01-01

    Fashion marketing explores connection between fashion design and marketing including development, promotion, sales and price aspects of fashion industry. Successful fashion marketing managers are aware that the most important fashion marketing elements are customer trend identification, building strong brands and creating positive image of the producers. This paper presents the findings of a research conducted for the purpose of identifying trends in marketing sector in textile and clothing i...

  13. The Logic of Fashion Cycles

    Science.gov (United States)

    Acerbi, Alberto; Ghirlanda, Stefano; Enquist, Magnus

    2012-01-01

    Many cultural traits exhibit volatile dynamics, commonly dubbed fashions or fads. Here we show that realistic fashion-like dynamics emerge spontaneously if individuals can copy others' preferences for cultural traits as well as traits themselves. We demonstrate this dynamics in simple mathematical models of the diffusion, and subsequent abandonment, of a single cultural trait which individuals may or may not prefer. We then simulate the coevolution between many cultural traits and the associated preferences, reproducing power-law frequency distributions of cultural traits (most traits are adopted by few individuals for a short time, and very few by many for a long time), as well as correlations between the rate of increase and the rate of decrease of traits (traits that increase rapidly in popularity are also abandoned quickly and vice versa). We also establish that alternative theories, that fashions result from individuals signaling their social status, or from individuals randomly copying each other, do not satisfactorily reproduce these empirical observations. PMID:22412887

  14. The logic of fashion cycles.

    Directory of Open Access Journals (Sweden)

    Alberto Acerbi

    Full Text Available Many cultural traits exhibit volatile dynamics, commonly dubbed fashions or fads. Here we show that realistic fashion-like dynamics emerge spontaneously if individuals can copy others' preferences for cultural traits as well as traits themselves. We demonstrate this dynamics in simple mathematical models of the diffusion, and subsequent abandonment, of a single cultural trait which individuals may or may not prefer. We then simulate the coevolution between many cultural traits and the associated preferences, reproducing power-law frequency distributions of cultural traits (most traits are adopted by few individuals for a short time, and very few by many for a long time, as well as correlations between the rate of increase and the rate of decrease of traits (traits that increase rapidly in popularity are also abandoned quickly and vice versa. We also establish that alternative theories, that fashions result from individuals signaling their social status, or from individuals randomly copying each other, do not satisfactorily reproduce these empirical observations.

  15. A comparison of anterior cervical discectomy and fusion (ACDF) using self-locking stand-alone polyetheretherketone (PEEK) cage with ACDF using cage and plate in the treatment of three-level cervical degenerative spondylopathy: a retrospective study with 2-year follow-up.

    Science.gov (United States)

    Chen, Yuqiao; Lü, Guohua; Wang, Bing; Li, Lei; Kuang, Lei

    2016-07-01

    To evaluate the clinical efficacy and radiological outcomes of anterior cervical discectomy and fusion (ACDF) using self-locking polyetheretherketone (PEEK) cages for treatment of three-level cervical degenerative spondylopathy. Twenty-eight patients underwent three-level ACDF using self-locking stand-alone PEEK cages (group A), and 26 patients underwent three-level ACDF using cages and plate fixation (group B) were reviewed retrospectively. Clinical efficacy was evaluated by pre- and post-operative Japanese Orthopedic Association (JOA) scores and Neck Disability Index (NDI). The operation time, blood loss, surgical results according to Odom's criteria and post-operative dysphagia status were also recorded. Radiological outcomes including fusion, cervical Cobb's lordosis, fused segment angle, disc height, and cage subsidence were assessed. Clinical outcome measures such as dysphagia and fusion rate and the results of surgery evaluated according to Odom's criteria were not statistically significant (P > 0.05) between groups. The operation time was shorter and blood loss was less in group A (P  0.05). Post-operative cage subsidence, the loss of disc height, cervical lordosis and the fused segment angle were relatively higher in group A than group B (P < 0.05). ACDF using self-locking stand-alone cages showed similar clinical results as compared to ACDF using cages and plate fixation for the treatment of three-level cervical degenerative spondylopathy. However, potential long-term problems such as cage subsidence, loss of cervical lordosis and fused segment angle post-operatively were shown to be associated with patients who underwent ACDF using self-locking stand-alone cages.

  16. Mars Propellant Liquefaction Modeling in Thermal Desktop

    Science.gov (United States)

    Desai, Pooja; Hauser, Dan; Sutherlin, Steven

    2017-01-01

    NASAs current Mars architectures are assuming the production and storage of 23 tons of liquid oxygen on the surface of Mars over a duration of 500+ days. In order to do this in a mass efficient manner, an energy efficient refrigeration system will be required. Based on previous analysis NASA has decided to do all liquefaction in the propulsion vehicle storage tanks. In order to allow for transient Martian environmental effects, a propellant liquefaction and storage system for a Mars Ascent Vehicle (MAV) was modeled using Thermal Desktop. The model consisted of a propellant tank containing a broad area cooling loop heat exchanger integrated with a reverse turbo Brayton cryocooler. Cryocooler sizing and performance modeling was conducted using MAV diurnal heat loads and radiator rejection temperatures predicted from a previous thermal model of the MAV. A system was also sized and modeled using an alternative heat rejection system that relies on a forced convection heat exchanger. Cryocooler mass, input power, and heat rejection for both systems were estimated and compared against sizing based on non-transient sizing estimates.

  17. Response to "Fashion Cycles in Economics"

    OpenAIRE

    Wolfgang Pesendorfer

    2004-01-01

    The paper argues that fashion demand is cyclical because of the signaling role of fashion. Agents use fashion goods to signal their type—e.g., their wealth—and to screen the type of other agents. A fashion good is an effective signal as long as its price is high and only high types have an incentive to buy it. Over time producers will lower the price of the fashion good to sell the good to lower types. This leads to a degradation of the signaling value of the fashion. Eventually, there is...

  18. Training Capabilities of Wearable and Desktop Simulator Interfaces

    Science.gov (United States)

    2011-11-01

    Intrinsic Motivation Inventory) than the control group, with no differences being found between the desktop and wearable groups.  The Desktop and...associated with the use of the simulator for training, with each of these scales ranging from 0 - 500. Intrinsic Motivation Inventory (IMI). The IMI...subscale of the Presence Questionnaire (r = .350, p = .001) as well as the Perceived Competence subscale of the Intrinsic Motivation Inventory (r

  19. Microsoft Virtualization Master Microsoft Server, Desktop, Application, and Presentation Virtualization

    CERN Document Server

    Olzak, Thomas; Boomer, Jason; Keefer, Robert M

    2010-01-01

    Microsoft Virtualization helps you understand and implement the latest virtualization strategies available with Microsoft products. This book focuses on: Server Virtualization, Desktop Virtualization, Application Virtualization, and Presentation Virtualization. Whether you are managing Hyper-V, implementing desktop virtualization, or even migrating virtual machines, this book is packed with coverage on all aspects of these processes. Written by a talented team of Microsoft MVPs, Microsoft Virtualization is the leading resource for a full installation, migration, or integration of virtual syste

  20. The impact of Sustainable Fashion on the Marketing Communication of Czech fashion Brands

    OpenAIRE

    Havrdová, Karolína

    2017-01-01

    The bachelor thesis deals with the principles of sustainable fashion and related marketing techniques, to which fashion brands often resort. This issue is explored by the author in the context of the Czech fashion scene, using in-depth interviews with representatives of Czech fashion brands. The topic is first introduced from a theoretical point of view, where the term "sustainable fashion" is explained to the reader and he gets more familiar with the individual lifecycle phases of a fashion ...

  1. Fashioning the fashion princess: mediation—transformation—stardom

    Directory of Open Access Journals (Sweden)

    Therése Andersson

    2012-03-01

    Full Text Available Is she looking as royal as can be? Dressing the part of a princess? Popular media texts, such as magazines completely devoted to celebrity matters, dealing with reports on who is wearing what at which occasion, provide the empirical outset for this textual study on the representations of the Scandinavian princesses of today: Mary (Denmark, Mette-Marit (Norway, Victoria (Sweden and Madeleine (Sweden. In this article the princesses are, on a theoretical level, considered stars with their own images, images constructed in a similar way as film stars, with fashion and appearance as the focal point. In popular media texts, such as the Swedish woman's magazine Svensk Damtidning, the styles of the princesses are scrutinised, compared and evaluated. These mappings are in this way further examined, and the topics surrounding the representations are surveyed. The themes selected for supplementary examination are personal style and Cinderella narrative, as they emerge as intimately interrelated with fashion. The epithet princess, in the sense “what a princess ought to look like”, is given in terms of aestheticised appearance: body, fashion and personal style, is thus discussed and theorised throughout the article. Hence, the purpose of this article is to examine the roll of dress and the matter of appearance concerning the representations of the Scandinavian princesses, relating to the themes of style and consumption, as well as the transformation narratives. How are these royal styles constructed, on a designer level as well on a thematic level? Therése Andersson, Ph.D., Cinema Studies, currently employed at the Department of History, Stockholm University. Her doctoral thesis is entitled Beauty Box: Film Stars and Beauty Culture in Early 20th Century Sweden. She has recently finished her post doctoral research project Sofia Coppola's Marie Antoinette, granted by Anna Ahlström and Ellen Terserus Foundation, and is currently working on the research

  2. Ergonomics, design universal and fashion.

    Science.gov (United States)

    Martins, S B; Martins, L B

    2012-01-01

    People who lie beyond the "standard" model of users often come up against barriers when using fashion products, especially clothing, the design of which ought to give special attention to comfort, security and well-being. The principles of universal design seek to extend the design process for products manufactured in bulk so as to include people who, because of their personal characteristics or physical conditions, are at an extreme end of some dimension of performance, whether this is to do with sight, hearing, reach or manipulation. Ergonomics, a discipline anchored on scientific data, regards human beings as the central focus of its operations and, consequently, offers various forms of support to applying universal design in product development. In this context, this paper sets out a reflection on applying the seven principles of universal design to fashion products and clothing with a view to targeting such principles as recommendations that will guide the early stages of developing these products, and establish strategies for market expansion, thereby increasing the volume of production and reducing prices.

  3. Knitting in the History of Fashion

    OpenAIRE

    Degeniene, Virginija

    2014-01-01

    Knitting technique is rarely mentioned in overview of costume history. Fashion theorists' attention to knitting is also insignificant because this technique never had significant influence on fashion changes. The intention of article is to overview the evolution of knitting, to inquire about its historic roots and its place in fashion history, to present knitting as creative process and contemporary technology that takes even greater part in world of fashion. I wanted to deny established ster...

  4. Customer relationship management in the fashion industry

    OpenAIRE

    Kamblevičiūtė, Kamilė

    2016-01-01

    Customer Relationship Management in the Fashion Industry The fashion industry is a product of the modern age. In ancient times, most of clothes were handmade, or so-called home-made, which were made on individual basis. Due to the development of new technologies, the rise of global capitalism, the expansion of factory systems, the attitude towards the concept of clothing was shifting. The fashion industry consists of four levels: raw material, the design of fashion goods, manufacturing, marke...

  5. Increasing Open Source Software Integration on the Department of Defense Unclassified Desktop

    Science.gov (United States)

    2008-06-01

    Figure 3. Windows Remote Desktop from Linux................................................ 49 Figure 4. Citrix XenDesktop Virtualization...released XenDesktop product from Citrix is one such example (Figure 4). 50 Figure 4. Citrix XenDesktop Virtualization Source: http...described in Chapter IV are currently used to satisfy the needs of these COI’s, namely remote desktop computing via terminal servers and Citrix -based

  6. Antonio Lopez: Fashion, Art, Sex & Disco

    DEFF Research Database (Denmark)

    Langkjær, Michael Alexander

    2014-01-01

    Book review. Roger Padilha and his brother Mauricio may already be familiar to some as the New York-based fashion publicists, creators of the fashion public relations agency MAO PR, and as authors of The Stephen Sprouse Book (Rizzoli, 2009). Antonio Lopez: Fashion, Art, Sex & Disco, their second...

  7.  Fashion Mediators and Distributed Agency

    DEFF Research Database (Denmark)

    Sommerlund, Julie

    intermediaries" (Bourdieu, 1984) which designates a certain class of people. Empirically, the paper works with the cultural and aesthetic economies - and with fashion in particular. Using the mediator as central concept, the paper presents empirical stories from the field of fashion, and fashion marketing...

  8. [Asperger syndrome - a fashionable diagnosis?].

    Science.gov (United States)

    Haker, Helene

    2014-10-01

    The Asperger Syndrome is - in contrast to early childhood autism - a disorder at the lighter end of the autism spectrum. Although first described in 1943, it was included in the ICD-10 not before 1992. The knowledge about this lighter autistic disorder spread only slowly. The increasing prevalence rates can be explained by the increased knowledge about this disorder and the growing clinical experience. In contrast to the public that gives repeated medial attention to it, and to would-be affected who seem to see an attractive excuse for social problems in an Asperger diagnosis, many psychiatrists appear cautious to state a diagnosis with which they are not familiar and which is discredited as a fashionable diagnosis.

  9. Placing fashion: art, space, display and the building of luxury fashion markets through retail design

    OpenAIRE

    Crewe, Louise

    2015-01-01

    This paper explores the performative and affective affordances enshrined in contemporary fashion space. Fashion markets need to be placed in a much more serious conceptual way. Whilst much critical attention has been focused on the geographies of fashion production, it is also important to explore the spaces in which fashion is displayed, consumed, exhibited and performed and thus to understand how fashion markets are ordered, regulated and maintained in space and through time. In order to ‘p...

  10. Comparison of Higher Fashion Involvement Group and Lower Fashion Involvement Group in Taiwan

    OpenAIRE

    Huang, Yu-Chiao

    2013-01-01

    Fashion collaboration becomes a common marketing strategy for many fashion brands in order to attract consumers’ attentions and stand out from competitors. The purpose of this dissertation is to explore the formation of consumers’ attitudes toward fashion collaboration. First, it intends to distinguish different types of consumers, which are higher fashion involvement and lower fashion involvement. Second, by utiliseing four different variables, which are prior attitudes, product fit, brand, ...

  11. Desktop Computing - Distributed Cognition in a Tax Office

    Directory of Open Access Journals (Sweden)

    Martin Nielsen

    2004-05-01

    Full Text Available Based on a detailed study of the use of representations in a tax assessment process, this paper presents an analysis of the use of the physical desktop and of paper documents, files and electronic information. This analysis challenges the ways in which the computer desktop is designed and used normally, and we present a number of challenges to user interface design. Taking these seriously, means to revisit several taken-for-granted elements of the current WIMP regime: the randomly overlapping windows on a non-structured background; the lack of traces of time and past location; and the individualised and non-activity-oriented set-up of the desktop.

  12. Perception Analysis of Desktop and Mobile Service Website

    Directory of Open Access Journals (Sweden)

    Rizqiyatul Khoiriyah

    2016-12-01

    Full Text Available The research was conducted as a qualitative study of the website to deeper explore and examine the analysis of user perception of desktop and mobile website services. This research reviewed about user perception of desktop and mobile service website used by using qualitative methods adapted to WebQual and User Experience approach. This qualitative research refered to the theoretical reference written by Creswell (2014. The expected outcome is to know the user perceptions of the available services and information in the website along with the possibility of desktop and mobile gap arising from differences in the two services. These results can be used as a service model on the website of the user experience.

  13. The Impact of Integrated Practices of Lean, Green, and Social Management Systems on Firm Sustainability Performance—Evidence from Chinese Fashion Auto-Parts Suppliers

    Directory of Open Access Journals (Sweden)

    Lin Wu

    2015-03-01

    Full Text Available To better satisfy various stakeholders, firms are seeking integrated practices that can enhance their sustainability performance, also well known as the Triple Bottom Line (3BL. The fashion industry exhibits potential conflicts with the spirit of sustainability because of the waste created by high levels of demand uncertainty and the extant usage of resources in production. Literature suggests that selected stand-alone practices of lean, green, and Corporate Social Responsibility (CSR management systems have a positive impact on firm sustainability performance. However, how the combination of selected practices from these three management systems impacts the 3BL remains unclear. Based on case studies, we build an integrated sustainable practices model incorporating the most popular lean, green, and social practices and develop propositions for future tests. Our framework suggests the implementation of integrated practices would have a stronger influence on 3BL performance than individual practice implementation.

  14. Design of All Digital Flight Program Training Desktop Application System

    Directory of Open Access Journals (Sweden)

    Li Yu

    2017-01-01

    Full Text Available All digital flight program training desktop application system operating conditions are simple. Can make the aircraft aircrew learning theory and operation training closely. Improve the training efficiency and effectiveness. This paper studies the application field and design requirements of flight program training system. Based on the WINDOWS operating system desktop application, the design idea and system architecture of the all digital flight program training system are put forward. Flight characteristics, key airborne systems and aircraft cockpit are simulated. Finally, By comparing flight training simulator and the specific script program training system, The characteristics and advantages of the training system are analyzed in this paper.

  15. An Introduction to Version Control Using GitHub Desktop

    Directory of Open Access Journals (Sweden)

    Daniel van Strien

    2016-06-01

    Full Text Available In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you implement version control in your academic writing

  16. Fashion marketing in textile and clothing industry

    Directory of Open Access Journals (Sweden)

    Alica Grilec Kaurić

    2009-12-01

    Full Text Available Fashion marketing explores connection between fashion design and marketing including development, promotion, sales and price aspects of fashion industry. Successful fashion marketing managers are aware that the most important fashion marketing elements are customer trend identification, building strong brands and creating positive image of the producers. This paper presents the findings of a research conducted for the purpose of identifying trends in marketing sector in textile and clothing industry in Croatia. The research was conducted through personal interviews with marketing and company managers in Croatia. The research identified that marketing is insufficiently implemented in Croatian textile and clothing industry, despite growing brand management importance. However, because of lack in marketing knowledge and bad brand management, development of fashion brand is the most critical factor in successful business activity in textile and clothing industry.

  17. Corporate Sustainability in Fashion and Luxury Companies

    OpenAIRE

    Arrigo, Elisa

    2016-01-01

    The paper deepens the notion of corporate sustainability in fashion and luxury field in order to highlight the main sustainable issues faced by companies operating in these markets. In particular, to provide a more faithful depiction of corporate sustainability in the fashion industry, two apparently opposed fashion market segments (mass-market and luxury) have been analyzed. Findings have shown how sustainability represents a critical driver of growth for both mass-market and luxury companie...

  18. Tourism and fashion: factors affecting trip length

    OpenAIRE

    Calderón García, María Haydeé; G. Gallarza, Martina; Fayos Gardó, Teresa; O'Sullivan, P.

    2016-01-01

    Tourism and shopping are closely related, and the influence of fashion shopping on a tourist's decision to travel is especially significant. The concept of cognitive and hedonic involvement enables us to relate the importance given to shopping by consumers of fashion products and of tourism services. This research analyses whether tourist involvement in fashion shopping has an impact on the length of their stay in a destination. In addition, it examines whether trip length is conditioned by t...

  19. Exploring the Aesthetics of Sustainable Fashion

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Folkmann, Mads Nygaard

    , sustainable fashion. In programming the didactical setting for the students’ projects, several aesthetics must be considered: the aesthetic codes of the textile and fashion design discipline, both in terms of materials and expression, deriving from within the design practice itself and the aesthetic codes...... of mediated expressions seen in e.g. fashion magazines which create a frame of aestheticization influencing how fashion expressions are valued. In this tension between internal aesthetics and external aestheticization, the students are set out to create a new design expression for sustainable design which...

  20. Exploring the Aesthetics of Sustainable Fashion

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Folkmann, Mads Nygaard

    2015-01-01

    , sustainable fashion. In programming the didactical setting for the students’ projects, several aesthetics must be considered: the aesthetic codes of the textile and fashion design discipline, both in terms of materials and expression, deriving from within the design practice itself and the aesthetic codes...... of mediated expressions seen in e.g. fashion magazines which create a frame of aestheticization influencing how fashion expressions are valued. In this tension between internal aesthetics and external aestheticization, the students are set out to create a new design expression for sustainable design which...

  1. Telecollaborative Desktop-Videoconferencing Exchange: The Case of Mark

    Science.gov (United States)

    Martin, Véronique

    2014-01-01

    This presentation is a case study of the Intercultural Communicative Competence (ICC) development of Mark, one of ten American students engaged in a desktop-videoconferencing telecollaborative exchange with a class of French students. Due in part to its inherent complexity, this context has not been widely researched. To observe ICC development, I…

  2. Perancangan Sistem Otomatis Update Pada Aplikasi Desktop Abios

    Directory of Open Access Journals (Sweden)

    Karto Iskandar

    2010-12-01

    Full Text Available Unlike web applications easier to update the latest version, desktop applications more difficult and must involve the user in doing so. It is caused by a desktop application is an application that is installed in the computer user. The purpose of this research is to design an automatic system updates on a desktop application, an example case: Application Binus International Operational Support (ABIOS. This research used literature study and system design. In desktop applications, often there is update the latest applications that are not known to the user who sometimes fatal and disrupt business operations. Generally, developer will inform the changes version to user that they can update the application. In an update of applications, should be done by the system automatically, not manually by users. Once in a while, the user background is not from computer base. After doing the research, it can be concluded that the system automatically updates the application has benefits to users in obtaining information regarding the latest version, and can assist in automatically update the latest application is based on computerization. For further development of this system is expected to operate on multi platforms and or mobile applications. 

  3. An Exercise in Desktop Publishing: Using the "Newsroom."

    Science.gov (United States)

    Kiteka, Sebastian F.

    This guide provides a description and step-by-step instructions for the use of "Newsroom," a desktop-publishing program for the Apple II series of microcomputers produced by Springboard Software Inc. Based on the 1984 version of the program, this two-hour exercise focuses on the design and production of a newsletter with text and…

  4. Versatile Desktop Experiment Module (DEMo) on Heat Transfer

    Science.gov (United States)

    Minerick, Adrienne R.

    2010-01-01

    This paper outlines a new Desktop Experiment Module (DEMo) engineered for a chemical engineering junior-level Heat Transfer course. This new DEMo learning tool is versatile, fairly inexpensive, and portable such that it can be positioned on student desks throughout a classroom. The DEMo system can illustrate conduction of various materials,…

  5. Laevo: A Temporal Desktop Interface for Integrated Knowledge Work

    DEFF Research Database (Denmark)

    Jeuris, Steven; Houben, Steven; Bardram, Jakob

    2014-01-01

    states and transitions of an activity. The life cycle is used to inform the design of Laevo, a temporal activity-centric desktop interface for personal knowledge work. Laevo allows users to structure work within dedicated workspaces, managed on a timeline. Through a centralized notification system which...

  6. Comparing Web Applications with Desktop Applications: An Empirical Study

    DEFF Research Database (Denmark)

    Pop, Paul

    2002-01-01

    of developing and using such applications. In this paper we present a comparison of web and desktop applications from the usability point of view. The comparison is based on an empirical study that investigates the performance of a group of users on two calendaring applications: Yahoo!Calendar and Microsoft...

  7. Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit

    Energy Technology Data Exchange (ETDEWEB)

    Levine, Aaron L [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-12-19

    Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit presentation from the WPTO FY14-FY16 Peer Review. The toolkit is aimed at regulatory agencies, consultants, project developers, the public, and any other party interested in learning more about the hydropower regulatory process.

  8. EPA Region 8, Memo on Desktop Printer Ink Cartridges Policy & Voluntary Printer Turn-in

    Science.gov (United States)

    This memo requests EPA Region 8 users to voluntarily turn-in their desktop printers and notifies users of the Region 8 policy to not provide maintenance or ink and toner cartridges for desktop printers.

  9. MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop

    Science.gov (United States)

    ... responsivefull.html MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop To use the sharing features on ... provide a consistent user experience from a desktop, tablet, or phone. All users, regardless of how they ...

  10. Fashion Merchandising. Marketing and Distributive Education.

    Science.gov (United States)

    Robertson, Horace C.; And Others

    This curriculum guide was developed to be used as a resource guide to assist marketing and distributive education teachers in planning and teaching a course in fashion merchandising. First, an introductory section is devoted to the management of the fashion merchandising curriculum, including information on the guide's background, units of…

  11. Making Fashion Sustainable : The Role of Designers

    NARCIS (Netherlands)

    van der Velden, N.M.

    2016-01-01

    The dissertation ‘Making Fashion Sustainable – The Role of Designers’ describes the PhD research of Natascha M. van der Velden on the envisioned role designers could take responsibility for in the transition towards a more sustainable fashion industry.
    The current worldwide textile and apparel

  12. Fashion, Difference and Identity in Serbian Socialism

    Directory of Open Access Journals (Sweden)

    Ildiko Erdei

    2016-03-01

    Moda i identitet. Utopija. Beograd 2008. Recently published book under the title "Aleksandar Joksimović - Fashion and Identity", written by Danijela Velimirović, was a long waited for a study of the complex relations between fashion and social identity in socialist Yugoslavia and Serbia.

  13. Folded Fashions: Symmetry in Clothing Design.

    Science.gov (United States)

    Evered, Lisa J.

    1992-01-01

    Fashion design is a field perceived as both a female and male domain that utilizes mathematics. Presents creative activities to teach the concept of symmetry as applied in fashion designs in the style of the famous French designer Madeleine Vionnet. (MDH)

  14. ASO EBI: FASHIONING SELF THROUGH PHOTOGRAPHY AND ...

    African Journals Online (AJOL)

    Precious

    Abstract. In Nigeria, fashion and photography have become powerful forces in the construction of self. ... dressing, and fashion as such, are taken more seriously in Lagos parties due mainly to the activities of a ...... that "popular photography eliminates accidents or any appearance that dissolves the real by temporalizing it.

  15. State Skill Standards: Fashion, Textiles and Design

    Science.gov (United States)

    Campbell, Rene Crepaldi; Gaudy, Glenna; Green-Jobe, Victoria; Hatch, Susan; Moen, Julianne; Sheldon, Shannon; Smith, Loree; Chessell, Karen

    2008-01-01

    The mission of Fashion, Textiles and Design Education is to prepare students for family and community life and careers in the fashion industry by creating opportunities to develop the knowledge, skills, attitudes and behaviors needed to: (1) Examine skills needed to effectively manage clothing decisions; (2) Evaluate the use, care and production…

  16. Basic Stand Alone Medicare Prescription Drug Events PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This is a Public Use File for Prescription Drug Events drawn from the 2008 Beneficiary Summary File of Medicare beneficiaries enrolled during the calendar year 2008,...

  17. Closure of army stand alone housing areas: An environmental adventure

    International Nuclear Information System (INIS)

    Ricci, J.A.

    1992-01-01

    In October 1988, Congress passed the Defense Authorization Amendments and Base Closure and Realignment Act, Public Law 100-526. This legislation provided the framework for making decisions about military base closures and realignments. The overall objective of the legislation was to close and realign bases to maximize savings without impairing the Army's overall military mission. In December 1988, the Defense Secretary's ad hoc Commission on Base Realignment and Closure issued its final report nominating candidate installations. Among the installations affected by the commission's recommendations, which were subsequently approved by Congress, were 53 military housing areas. The paper recounts the process by which each of the 53 housing areas was assessed to determine if any environmental restoration was to be performed prior to property sale. Each phase of the program is addressed from the Enhanced Preliminary Assessment through the issuance of a 'Statement of Condition' which, in accordance with Army real property regulations, is required prior to property transfer. The unique challenges presented by the housing areas are high-lighted; where materials such as asbestos, radon and fuel oil predominated, as opposed to laboratory chemicals and hazardous waste from industrial operations. In addition, attention is given to the myriad disciplines which interface in preparing a housing area for closure. Forty-three Statements of Condition have been issued to date, with the remainder to be prepared upon completion of remediation activities at each site

  18. Basic Stand Alone Medicare Claims Public Use Files

    Data.gov (United States)

    U.S. Department of Health & Human Services — CMS is committed to increasing access to its Medicare claims data through the release of de-identified data files available for public use. They contain...

  19. A stand-alone tidal prediction application for mobile devices

    Science.gov (United States)

    Tsai, Cheng-Han; Fan, Ren-Ye; Yang, Yi-Chung

    2017-04-01

    It is essential for people conducting fishing, leisure, or research activities at the coasts to have timely and handy tidal information. Although tidal information can be found easily on the internet or using mobile device applications, this information is all applicable for only certain specific locations, not anywhere on the coast, and they need an internet connection. We have developed an application for Android devices, which allows the user to obtain hourly tidal height anywhere on the coast for the next 24 hours without having to have any internet connection. All the necessary information needed for the tidal height calculation is stored in the application. To develop this application, we first simulate tides in the Taiwan Sea using the hydrodynamic model (MIKE21 HD) developed by the DHI. The simulation domain covers the whole coast of Taiwan and the surrounding seas with a grid size of 1 km by 1 km. This grid size allows us to calculate tides with high spatial resolution. The boundary conditions for the simulation domain were obtained from the Tidal Model Driver of the Oregon State University, using its tidal constants of eight constituents: M2, S2, N2, K2, K1, O1, P1, and Q1. The simulation calculates tides for 183 days so that the tidal constants for the above eight constituents of each water grid can be extracted by harmonic analysis. Using the calculated tidal constants, we can predict the tides in each grid of our simulation domain, which is useful when one needs the tidal information for any location in the Taiwan Sea. However, for the mobile application, we only store the eight tidal constants for the water grids on the coast. Once the user activates the application, it reads the longitude and latitude from the GPS sensor in the mobile device and finds the nearest coastal grid which has our tidal constants. Then, the application calculates tidal height variation based on the harmonic analysis. The application also allows the user to input location and time to obtain tides for any historic or future dates for the input location. The predicted tides have been verified with the historic tidal records of certain tidal stations. The verification shows that the tides predicted by the application match the measured record well.

  20. PMBLDCG based stand-alone wind energy conversion system for ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 1 (2012) >. Log in or Register to get access to full text downloads.

  1. Performance evaluation of stand alone hybrid PV-wind generator

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H. [Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia); Yahaya, M. S. [Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia)

    2015-05-15

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  2. PMBLDCG based stand-alone wind energy conversion system for ...

    African Journals Online (AJOL)

    user

    David et al 2001, Simoes and Farret 2004,. Bhadra et al 2004, Ackermann 2005). The permanent magnet ..... David Sharpe Burton, Jenkins Nick and Bossanyi Ervin, 2001. “Wind Energy Handbook,” John Wiley & Sons. Ltd. Gieras J. F. and ...

  3. Performance evaluation of stand alone hybrid PV-wind generator

    Science.gov (United States)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H.; Yahaya, M. S.

    2015-05-01

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  4. Performance evaluation of stand alone hybrid PV-wind generator

    International Nuclear Information System (INIS)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H.; Yahaya, M. S.

    2015-01-01

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand

  5. Algal Hydrogen Production -- Stand Alone or Integrated System?

    Energy Technology Data Exchange (ETDEWEB)

    Ghirardi, Maria L.; Maness, Pin Ching; Kosourovo, Sergey

    2016-01-01

    Photosynthetic bacteria and green algae photoproduce H2. but do so utilizing different catalysts and substrates. Green algae use reductant generate mostly by water oxidation to catalyze the reduction of protons to H2 gas, while photosynthetic bacteria catalyze H2 production from organic acids using the nitrogenase enzyme. Moreover, these two organisms utilize different regions of the solar spectrum to perform photosynthesis: green algae's light harvesting antenna is comprised of chlorophyll molecules that absorb mostly blue and red light; photosynthetic bacteria harvest blue and far-red light through their light-harvesting pigments to run its non-oxygenic photosynthetic reactions. There is thus an opportunity to increase the range of solar spectrum used to photoproduce H2 by combining the light-harvesting and catalytic properties of these two organisms in a single process. In the current manuscript, we describe an experimental system that validates this hypothesis and demonstrates quantitatively the advantages of a two organism process for production of higher amounts of H2 and thus achieving solar light conversion efficiencies.

  6. She stands alone: Pakistani woman film director, Shireen Pasha.

    Science.gov (United States)

    Mustafa, A

    1995-01-01

    This article describes the activities of film director Shireen Pasha in promoting truth in the mass media in Pakistan. Pasha is described as one who finds it inexcusable in a state-subsidized system that national problems of poverty are not aired openly. Pasha has pursued the goal of exposing the real lives of Pakistanis on film in contrast to the publicly aired segments of "pretty girls in nice drawing rooms." Foreign channels available through satellite communications technology are viewed by Pasha as inappropriate with regard to people's needs and uncreative. Pakistan began with one channel, PTV, which recently refused to air her documentary on living conditions in Pakistan's rural areas "The Travelogue Pakistan." "The Walled City of Lahore" was her film about life in the old city. Both films poetically depicted the honor of humans and their struggle to stay alive. Some of her documentaries are made to show the value of indigenous skills, centuries old know-how, and traditions, regardless of the poverty. Pasha is described as fighting with PTV management over use of resources. Pasha desires to invest in training people to do documentaries or be more field-oriented rather than investing in equipment. Pasha joined PTV in 1975 and left in 1990. Pasha is recognized for her isolation as a woman in the business world, her commitment to exposing remote cultures and truth, and the odds she must confront in attaining her goals. Pasha is committed to doing extensive research, usually conducted during the summer months, in order to construct a credible story line that is produced usually during the winter months. One model of film story line is defined as one where women are portrayed as starting from an indigenous skill or knowledge and shifting to a greater position of power and control over their lives. Pasha believes that people who make films have the responsibility to evoke a reaction in people and to offer solutions. Two acclaimed films, which were supported by USAID and the government, were "Before It's Too Late" and "Only One Way." Both deal with resource issues and the environment. She is currently director of her own film house, The Film Makers, in Lahore. After graduating from the National College of Arts in 1968, she furthered her education in the US in the history of art.

  7. Deterrents on the Over Utilisation of Stand Alone Photovoltaic (PV ...

    African Journals Online (AJOL)

    At inception of the programme, systems were either undersized, or over utilised as clients did not reveal their usage needs in an attempt to reduce costs. This resulted in battery failures and other system breakdowns. The NPVREP categorised systems in order to alleviate the problem of under sizing and/or over utilization of ...

  8. THE CURRENT UNDERSTANDING OF FASHION ESSENCE

    Directory of Open Access Journals (Sweden)

    Anastasya Aleksandrovna Zhilina

    2015-09-01

    Full Text Available The article considers a fashion as a real and an acting social fact that affects many aspects of the life of the individual and society. The interest in the ability to reflect the specific modes of social transformations becomes the basis for constructing a theoretical system of knowledge about it. Fashion as a scientific fact characterizes social processes that find manifestation in the outward culture forms and fashion meanings indicating the fashion values, which are endowed with certain properties of objects and events. Fashion, by definition, has a tendency to constant movement and innovation. So it always reflects the social and cultural content of a certain period, the essence of which is disclosed in its sociocultural context. Fashion phenomenon is associated with diverse social relationships, in this connection it is manifested in a multidisciplinary description of various scientific facts. The theory of fashion generation consists of separate concepts that complement each other or makes alternative viewpoints. The development of science requires a search for a new approach.

  9. Full-scope nuclear training simulator -brought to the desktop

    International Nuclear Information System (INIS)

    LaPointe, D.J.; Manz, A.; Hall, G.S.

    1997-01-01

    RighTSTEP is a suite of simulation software which has been initially designed to facilitate upgrade of Ontario Hydro's full-scope simulators, but is also adaptable to a variety of other roles. it is presently being commissioned at Bruch A Training Simulator and has seen preliminary use in desktop and classroom roles. Because of the flexibility of the system, we anticipate it will see common use in the corporation for full-scope simulation roles. A key reason for developing RighTSTEP (Real Time Simulator Technology Extensible and Portable) was the need to modernize and upgrade the full-scope training simulator while protecting the investment in modelling code. This modelling code represents the end product of 18 years of evolution from the beginning of its development in 1979. Bringing this modelling code to a modern and more useful framework - the combination of simulator host, operating system, and simulator operating system - also could provide many spin-off benefits. The development (and first implementation) of the righTSTEP system was cited for saving the corporation 5.6M$ and was recognized by a corporate New Technology Award last year. The most important spin-off from this project has been the desktop version of the full-scope simulator. The desktop simulator uses essentially the same software as does its full-scope counterpart, and may be used for a variety of new purposes. Classroom and individual simulator training can now be easily accommodated since a desktop simulator is both affordable and relatively ease to use. Further, a wide group of people can be trained using the desktop simulator: by contrast the full-scope simulators were almost exclusively devoted to front-line operating staff. The desktop is finding increasing use in support of engineering applications, resulting from its easy accessibility, breadth of station systems represented, and tools for analysis and viewing. As further plant models are made available on the new simulator platform and

  10.  Fashion Mediators and Distributed Agency

    DEFF Research Database (Denmark)

    Sommerlund, Julie

    intermediaries" (Bourdieu, 1984) which designates a certain class of people. Empirically, the paper works with the cultural and aesthetic economies - and with fashion in particular. Using the mediator as central concept, the paper presents empirical stories from the field of fashion, and fashion marketing......, and Belief - A New Sociology of Knowledge. J. Law. London, Routledge and Keagan Paul: 196-233. Hennion, A. (1997). "Baroque and rock: Music, mediators and musical taste." Poetics 24: 414 - 435. Latour, B. (1993). We Have Never Been Modern. New York, Harvester-Wheatsheaf....

  11. The Role of Fashion vs. Style Orientation on Sustainable Fashion Consumption

    DEFF Research Database (Denmark)

    Gwozdz, Wencke; Gupta, Shipra; Gentry, Jim

    2014-01-01

    Today, textile consumption is far from being sustainable with regard to production, purchase, maintenance, and disposal. The current fashion system is characterized by planned obsolescence, and environmental and social unsustainability. To resolve the tensions between sustainability and fashion...... is to investigate the potential of emphasizing style rather than fashion to enhance sustainability in fashion consumption. We suggest that as one ages, one tends to be less fashion-oriented. Further, higher style orientation enhances one’s ability to have more concern for the environment or knowledge about...... environmental apparel that further leads to sustainable consumption habits like environmental apparel consumption. Survey data across Germany, Sweden, UK and US is collected to examine the proposed relationships and thus provide insight on the role of fashion and style on sustainable fashion consumption....

  12. The Role of Fashion vs. Style Orientation on Sustainable Fashion Consumption

    DEFF Research Database (Denmark)

    Gwozdz, Wencke; Gupta, Shipra; Gentry, Jim

    2014-01-01

    Today, textile consumption is far from being sustainable with regard to production, purchase, maintenance, and disposal. The current fashion system is characterized by planned obsolescence, and environmental and social unsustainability. To resolve the tensions between sustainability and fashion......, the notion of style is one promising avenue. While fashion is ever changing, following trends, style evolves slowly and continues to remain stable over time, expressing consumers’ ways of life. Thus, the created planned obsolescence by fashion could be reduced by the notion of style. The aim of this study...... is to investigate the potential of emphasizing style rather than fashion to enhance sustainability in fashion consumption. We suggest that as one ages, one tends to be less fashion-oriented. Further, higher style orientation enhances one’s ability to have more concern for the environment or knowledge about...

  13. Diffusion and Consumption of Fashion among Iranian youth

    OpenAIRE

    Milani, Siamak

    2011-01-01

    Fashion can be both material and immaterial subject, immaterial part of it can relate fashion goods as a material object to the thoughts of fashion. Immateriality lets the fashion be easily diffused by stream of information. The relation between fashion goods and thoughts about fashion is mutual since they can develop each other. In the case of Iran, struggles exist among individuals and the government about appearance. How fashion as a global phenomenon can influences youth in Iran and sprea...

  14. TOPCAT: Desktop Exploration of Tabular Data for Astronomy and Beyond

    Directory of Open Access Journals (Sweden)

    Mark Taylor

    2017-06-01

    Full Text Available TOPCAT, the Tool for OPerations on Catalogues And Tables, is an interactive desktop application for retrieval, analysis and manipulation of tabular data, offering a powerful and flexible range of interactive visualization options amongst other features. Its visualization capabilities focus on enabling interactive exploration of large static local tables—millions of rows and hundreds of columns can easily be handled on a standard desktop or laptop machine, and various options are provided for meaningful graphical representation of such large datasets. TOPCAT has been developed in the context of astronomy, but many of its features are equally applicable to other domains. The software, which is free and open source, is written in Java, and the underlying high-performance visualisation library is suitable for re-use in other applications.

  15. Systems Engineering Model and Training Application for Desktop Environment

    Science.gov (United States)

    May, Jeffrey T.

    2010-01-01

    Provide a graphical user interface based simulator for desktop training, operations and procedure development and system reference. This simulator allows for engineers to train and further understand the dynamics of their system from their local desktops. It allows the users to train and evaluate their system at a pace and skill level based on the user's competency and from a perspective based on the user's need. The simulator will not require any special resources to execute and should generally be available for use. The interface is based on a concept of presenting the model of the system in ways that best suits the user's application or training needs. The three levels of views are Component View, the System View (overall system), and the Console View (monitor). These views are portals into a single model, so changing the model from one view or from a model manager Graphical User Interface will be reflected on all other views.

  16. Feasibility of Bioprinting with a Modified Desktop 3D Printer.

    Science.gov (United States)

    Goldstein, Todd A; Epstein, Casey J; Schwartz, John; Krush, Alex; Lagalante, Dan J; Mercadante, Kevin P; Zeltsman, David; Smith, Lee P; Grande, Daniel A

    2016-12-01

    Numerous studies have shown the capabilities of three-dimensional (3D) printing for use in the medical industry. At the time of this publication, basic home desktop 3D printer kits can cost as little as $300, whereas medical-specific 3D bioprinters can cost more than $300,000. The purpose of this study is to show how a commercially available desktop 3D printer could be modified to bioprint an engineered poly-l-lactic acid scaffold containing viable chondrocytes in a bioink. Our bioprinter was used to create a living 3D functional tissue-engineered cartilage scaffold. In this article, we detail the design, production, and calibration of this bioprinter. In addition, the bioprinted cells were tested for viability, proliferation, biochemistry, and gene expression; these tests showed that the cells survived the printing process, were able to continue dividing, and produce the extracellular matrix expected of chondrocytes.

  17. Application of desktop computers in nuclear engineering education

    International Nuclear Information System (INIS)

    Graves, H.W. Jr.

    1990-01-01

    Utilization of desktop computers in the academic environment is based on the same objectives as in the industrial environment - increased quality and efficiency. Desktop computers can be extremely useful teaching tools in two general areas: classroom demonstrations and homework assignments. Although differences in emphasis exist, tutorial programs share many characteristics with interactive software developed for the industrial environment. In the Reactor Design and Fuel Management course at the University of Maryland, several interactive tutorial programs provided by Energy analysis Software Service have been utilized. These programs have been designed to be sufficiently structured to permit an orderly, disciplined solution to the problem being solved, and yet be flexible enough to accommodate most problem solution options

  18. PENDIDIKAN ISLAM DALAM PERADABAN INDUSTRI FASHION

    Directory of Open Access Journals (Sweden)

    Ahmad Mustami

    2015-06-01

    Full Text Available This article discusses the concept Apparel in Islamic education . Which is currently a lot of variety of fashion in dress. Although the general function of clothes is a human genitalia cover and protect the body from the heat of the sun. However hijab at this time not just cover the nakedness , but rather as a fashion style that became a common thing now is infecting the womenfolk including Muslim. Ranging from clothes, pants, until hijab began in innovation so as to attract the eye. Although it is not yet represent the shape and fashion model/standard clothes, but felt able to express Islamic education in the dressing (hijab and a fashion model/Islamic clothing. Obviously keep on religious norms, ethical and moral teachings. Substance of clothing in Islam is polite in accordance with the values of Islamic Education.

  19. Sales Rebate Contracts in Fashion Supply Chains

    Directory of Open Access Journals (Sweden)

    Chun-Hung Chiu

    2012-01-01

    Full Text Available We explore in this paper the performance of sales rebate contracts in fashion supply chains. We conduct both analytical and numerical analyses via a mean-variance framework with reference to real empirical data. To be specific, we evaluate the expected profits and variance of profits (risk of the fashion supply chains, fashion retailers, and manufacturers under (1 the currently implemented sales rebate practices, (2 the case without sales rebate, and (3 the theoretical coordination situation (if target sales rebate is adopted. In addition, we analyze how sales effort affects the performances of the supply chain and its agents. Our analysis indicates that the rebate contracts may hurt the retailer and the manufacturer of a fashion supply chain when it is inappropriately set. Moreover, a properly designed sales rebate contract not only can coordinate the supply chain (with retail sales effort but can also improve expected profits and lower the levels of risk for both the manufacturer and the retailer.

  20. Cosmetic Foot Surgery: Fashion's Pandora's Box

    Science.gov (United States)

    ... A A A | Print | Share Cosmetic Foot Surgery: Fashion’s Pandora’s Box? Foot and ankle surgeons warn against ... a "face lift" and fit them into high-fashion shoes. But physician members of the American College ...

  1. Fashion sketch design by interactive genetic algorithms

    Science.gov (United States)

    Mok, P. Y.; Wang, X. X.; Xu, J.; Kwok, Y. L.

    2012-11-01

    Computer aided design is vitally important for the modern industry, particularly for the creative industry. Fashion industry faced intensive challenges to shorten the product development process. In this paper, a methodology is proposed for sketch design based on interactive genetic algorithms. The sketch design system consists of a sketch design model, a database and a multi-stage sketch design engine. First, a sketch design model is developed based on the knowledge of fashion design to describe fashion product characteristics by using parameters. Second, a database is built based on the proposed sketch design model to define general style elements. Third, a multi-stage sketch design engine is used to construct the design. Moreover, an interactive genetic algorithm (IGA) is used to accelerate the sketch design process. The experimental results have demonstrated that the proposed method is effective in helping laypersons achieve satisfied fashion design sketches.

  2. Fashion design solutions for environmentally conscious consumers

    Science.gov (United States)

    Wagner, M.; Chen, Y.; Curteza, A.; Thomassey, S.; Perwuelz, A.; Zeng, X.

    2017-10-01

    This paper intends to give an overview of the design solutions in fashion for environmentally conscious consumers, presenting green and ethical practices in contemporary clothing design. The results introduce the concept of slow fashion and discuss available fashion design solutions, giving most prominent examples of sustainable products and brands, these contain one or more design features. By this, the discussion extracts the main contemporary ideas. The presented examples of current offers are all envisioning less impact on the environment and society. Sustainable design solutions use more environmentally friendly materials such as organic cotton, incorporate circular design or design for recycling, e.g., replacing button closures with alternative closing possibilities or leather labels with printed versions, or ensure long product life through durability, among other methods. There are differing designs due to creators’ individuality. This overview can be beneficial for the future development of new solutions for more environmentally friendly fashion.

  3. The Preservation of Physical Fashion Forecasts

    OpenAIRE

    Kosztowny, Alexander John

    2015-01-01

    Archivists, librarians, and historians desire to preserve the past. Many aspects of fashion design, from costume, illustrations, and swatches have been archived as an integral part of documenting the design process. Trend predictives or forecasting reports are utilized by the fashion industry, yet are not preserved. These books are used to predict what silhouettes, colors, and fabrics will be popular in upcoming seasons, so designers, manufacturers, and retailers can successfully sell items t...

  4. The fashion industry and the intellectual property

    OpenAIRE

    Salas Pasuy, Brenda

    2013-01-01

    Referring to fashion immediately we think in something which is ephemera and changing. Nevertheless, behind the production of an appeal garment there are many factors involved which interact to produce a final product attractive to the consumer. Fashion is not just the sale as itself, covers the image and the prestige from who creates the garment. Thus, the process of creation and production itself take us to value their importance in the context of international trade. In fact, they are good...

  5. Virtual reality exposure therapy: 150-degree screen to desktop PC.

    Science.gov (United States)

    Tichon, Jennifer; Banks, Jasmine

    2006-08-01

    Virtual reality exposure therapy (VRET) developed using immersive or semi-immersive virtual environments present a usability problem for practitioners. To meet practitioner requirements for lower cost and portability VRET programs must often be ported onto desktop environments such as the personal computer (PC). However, success of VRET has been shown to be linked to presence, and the environment's ability to evoke the same reactions and emotions as a real experience. It is generally accepted that high-end virtual environments (VEs) are more immersive than desktop PCs, but level of immersion does not always predict level of presence. This paper reports on the impact on presence of porting a therapeutic VR application for schizophrenia from the initial research environment of a semi-immersive curved screen to PC. Presence in these two environments is measured both introspectively and across a number of causal factors thought to underlie the experience of presence. Results show that the VR exposure program successfully made users feel they were "present" in both platforms. While the desktop PC achieved higher scores on presence across causal factors participants reported they felt more present in the curved screen environment. While comparison of the two groups was statistically significant for the PQ but not for the IPQ, subjective reports of experiences in the environments should be considered in future research as the success of VRET relies heavily on the emotional response of patients to the therapeutic program.

  6. Competency Based Assessment in Fashion Design

    Science.gov (United States)

    Russanti, Irma; Nurlaela, Lutfiyah; Basuki, Ismet; Munoto

    2018-04-01

    Professional certification is a form of stipulation on certain competency standards provided by one professional organization to the performance of a person through assessment. For that an assessment needs to be standardized so that there exists a general standardized scale to measure competence. In the professional certification of fashion design department, an instrument of competency based assessment is essential to be developed. The purpose of this review is to know the application of competency based assessment in the field of fashion design. The literature reviews were found by journal searching with keywords competency based assessment and fashion design in Google scholar, of which was gotten over 20 journals from 2006 to 2016. Afterwards, the search of the free-downloaded e-books in libgen was conducted under competency based assessment and fashion design, which is then found some related references. The obtained literatures were used to review the definition, approach, and implementation of competency based assessment in the field of fashion design. Results show that it is important to develop an assessment sheet in the field of fashion design covering garment, apparel and embroidery sectors by patterning the criteria of performers along with the qualifications.

  7. A fashion model with social interaction

    Science.gov (United States)

    Nakayama, Shoichiro; Nakamura, Yasuyuki

    2004-06-01

    In general, it is difficult to investigate social phenomena mathematically or quantitatively due to non-linear interactions. Statistical physics can provide powerful methods for studying social phenomena with interactions, and could be very useful for them. In this study, we take a focus on fashion as a social phenomenon with interaction. The social interaction considered here are “bandwagon effect” and “snob effect.” In the bandwagon effect, the correlation between one's behavior and others is positive. People feel fashion weary or boring when it is overly popular. This is the snob effect. It is assumed that the fashion phenomenon is formed by the aggregation of individual's binary choice, that is, the fashion is adopted or not. We formulate the fashion phenomenon as the logit model, which is based on the random utility theory in social science, especially economics. The model derived here basically has the similarity with the pioneering model by Weidlich (Phys. Rep. 204 (1991) 1), which was derived from the master equation, the Langevin equation, or the Fokker-Planck equation. This study seems to give the behavioral or behaviormetrical foundation to his model. As a result of dynamical analysis, it is found that in the case that both the bandwagon effect and the snob effect work, periodic or chaotic behavior of fashion occurs under certain conditions.

  8. CLOUD-BASED VS DESKTOP-BASED PROPERTY MANAGEMENT SYSTEMS IN HOTEL

    Directory of Open Access Journals (Sweden)

    Mustafa\tGULMEZ

    2015-06-01

    Full Text Available Even though keeping up with the modern developments in IT sector is crucial for the success and competitiveness of a hotel, it is usually very hard for new technologies to be accepted and implemented. This is the case with the cloud technology for which the opinions between hoteliers are divided on those who think that it is just another fashion trend, unnecessary to be taken into consideration and those that believe that it helps in performing daily operations more easily, leaving space for more interaction with guests both in virtual and real world. Usage of cloud technology in hotels is still in its beginning phase and hoteliers still have to learn more about its advantages and adequate usage for the benefit of overall hotel operating. On the example of hotel property management system (PMS and comparison between features of its older desktop-version and new web-based programs, this research aims at finding out at which stage and how effective is usage of cloud technology in hotels. For this, qualitative research with semi-structured interviews with hotel mangers that use one of these programs was conducted. Reasons for usage and advantages of each version are discussed.

  9. Are fashion retailers creative? Evidence from Uniqlo, Asia's leading fashion brand

    OpenAIRE

    Zhu, Yi

    2016-01-01

    This paper examines creativity in the fashion industry based on the case of Asia's leading fashion brand, Uniqlo. It uses the theoretical framework of Richard Caves's seven economic properties to explore the assumption that fashion retailers are creative. Caves's theory discusses the relationships among various types of employees, including creators within companies, products, production, and promotion. This paper uses Uniqlo to discuss creative elements based on an examination of the company...

  10. Fashion and its influence on consumer behavior

    Directory of Open Access Journals (Sweden)

    Khomutova Olga

    2016-05-01

    Full Text Available The questions related to the influence of fashion on consumer behavior are researched in the article. The importance of this research is conditioned, first of all, by the fact, that in the modern world the process of the development of the society of consumption is growing, and it is fashion that has become the social regulator of human activity. The aim of this article is to find out, what influence fashion produces on the behavior of consumers (negative or positive, and whether it is a means of human individualization. The research results show, that following fashion demonstrates the attitude of a consumer to society, to the surrounding world, to himself. On the one hand, a person wants to preserve his or her individuality, on the other hand, strives to identify himself with other members of society. The hidden desire to submit to the fashion contests the aspiration to be independent of it, not to imitate others, but to be different from them.

  11. Moe fenomen. The Phenomenon of Fashion

    Directory of Open Access Journals (Sweden)

    Ines Piibeleht

    2012-06-01

    Full Text Available Since the last quarter of the 20th century, particularly after the “cultural turn”, the interest in fashion has been increasing in a variety of different disciplines. Fashion has begun to be investigated in many different contexts, using new theoretical approaches. Fashion can be regarded as a social phenomenon, a sign system, as art, myth, or the product of the fashion industry. The purpose of this article is not to provide a definition of fashion, but rather to raise the question of how to approach the experience of fashion analytically. The methodological issues discussed here emerged in the course of preparing for empirical research on fashion. The observations and comparisons that constitute the core of this article are the result of efforts to juxtapose different methods. The traditional history of fashion used a historical-epistemological strategy but, depending on how one defines culture, the meaning of fashion can also be analysed using methods based on different epistemological strategies. The phenomenological method elaborated by Edmund Husserl, which I have chosen for my analysis of the experience of fashion, defines culture through the experiential acts of individuals. Simply stated, phenomenology considers the world as it is given to us in our consciousness. What is most important for empirical research is that the phenomenological method makes it possible to study the structure of a concrete experience and to focus on the mechanisms of the subjective creation of meaning. Thus this article has two main foci: a theoretical analysis of how the experience of fashion can be analytically revealed using the phenomenological method, and a comparison of the phenomenological approach with methods based on other strategies. The analysis of descriptions in the first person makes it possible to highlight how experience has been constructed. People “see” fashion based on structures of meaning; when they describe their own experience

  12. Determination of consumer awareness about sustainable fashion

    Science.gov (United States)

    Saricam, C.; Erdumlu, N.; Silan, A.; Dogan, B. L.; Sonmezcan, G.

    2017-10-01

    The concept of sustainability has begun to gain importance in fashion industry. The companies, which are acting in sustainable fashion, want to gain recognition, inform the consumer about their products and services and generate a demand from the consumers. But the awareness of the consumers about sustainability is still an unknown. In this study, the level of awareness of consumers about sustainable fashion was tried to be determined with a survey established in Turkey in which the socio-demographic characteristics and the awareness level of the participants were questioned. The result of the survey showed that the level of awareness among the participants is not so high and the perception of sustainability is mostly limited to some aspects of sustainable fashion such as “Usage of organic materials” and “Recycling”. Besides, the analysis of the relation between socio-demographic characteristics and awareness level of sustainable fashion showed that the awareness level increased with the education level and income to some extent. But specifically, the males and the participants aged between 24-29 have higher levels of awareness compared with the other participants.

  13. Scottish Academy of Fashion Showcase Exhibition at Inspace Edinburgh

    OpenAIRE

    Gillan, Robert

    2011-01-01

    The Scottish Academy of Fashion (SAF) is an ambitious project to establish Scotland as a global centre for excellence in fashion related learning and commercially relevant research.Scotland has world-class education and globally recognised leaders in the fashion industry. It has a niche fashion and textile industry embedded in luxury fashion worldwide. Scotland attracts international talent to fashion-related education.SAF aims to develop an effective platform to combine these strengths, and ...

  14. Perancangan Buku Ilustrasi Fashion Korea Untuk Anak Muda Di Surabaya

    OpenAIRE

    Prasetia, Heni; Wibowo, Wibowo; Aryanto, Hendro

    2013-01-01

    Fashion adalah suatu bagian dari manusia sehari-hari yang tidak terpisahkan. Tren fashion tidak pernah redup dan menjadi acuan bagi lahirnya jenis-jenis fashion di dunia seperti halnya fashion Korea yang pada saat ini memang sangat populer di kalangan masyarakat muda. Fashion Korea ini muncul setelah munculnya fenomena K-Pop atau Korean Wave. Tujuan dari perancangan ini adalah untuk memperkenalkan budaya Korea Selatan khususnya fashion Korea di Surabaya. Masyarakat masih belum terlalu mengena...

  15. Visual Fashion-Product Search at SK Planet

    OpenAIRE

    Kim, Taewan; Kim, Seyeong; Na, Sangil; Kim, Hayoon; Kim, Moonki; Jeon, Byoung-Ki

    2016-01-01

    We build a large-scale visual search system which finds similar product images given a fashion item. Defining similarity among arbitrary fashion-products is still remains a challenging problem, even there is no exact ground-truth. To resolve this problem, we define more than 90 fashion-related attributes, and combination of these attributes can represent thousands of unique fashion-styles. The fashion-attributes are one of the ingredients to define semantic similarity among fashion-product im...

  16. Perancangan Interior Pusat Pendidikan Fashion Di Kota Samarinda

    OpenAIRE

    William, Livia Gabrielle

    2016-01-01

    Interior Education Center Fashion in Samarinda City aims to find education center of fashion that can complete student's facilities, finding educational center of fashion that produces interior design educational, informative, and presentative, find educational center of fashion which can show elements of Indonesian culture, discover fashion education center that can attract people in Samarinda. The expected benefits of this research is for the public forum for people who have become fashion ...

  17. Fashion Merchandising: A Suggested Program Guide. Fashion Industry Series No. 4.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The fashion merchandising guide is the fourth of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is intended to provide youths and adults with intensive preparation for initial entry employment and also with career advancement opportunities within the…

  18. Gigabits to the Desktop: Installing tomorrow`s networks today

    Energy Technology Data Exchange (ETDEWEB)

    Kuhfuss, T.C.; Phillips, P.T.

    1994-03-01

    Argonne is one of the US Department of Energy`s world class research institutions. Leading edge computing tools and networks allow Argonne to maintain and enhance this reputation. One current effort to deploy leading edge tools is the Argonne ``Gigabits to the Desktop`` project. While the delivering and using gigabits to the desktop is little more than a hope at this time, this paper will discuss the hurdles to achieving it and how to tear down as many hurdles as possible. Under this project, four distinct areas are being investigated and enhanced. This paper will discuss briefly the applications and tools that we see driving the requirement for gigabits to the desktop. It will touch on a functional description of our``ideal`` workstations, architectures and the candidates for the next generation network capable of delivering gigabits. Lastly, it will provide an in-depth analysis of physical layer options and attempt to prove that this area, while the least risky, must be done properly, with the proper media. This paper assumes one important point. It assumes that bandwidth is essentially free. We will discuss network architectures and physical installation recommendations which have a fixed cost. However on a campus, there is no marginal cost for additional packets on these networks once the network infrastructure is installed. This point is important when extrapolating our conclusions to the wide area. The marginal cost of a packet sent to a commercial network is usually non zero. This fact may prove to be a great hindrance in migrating the applications mentioned beyond the organizational boundaries.

  19. Desktop computer graphics for RMS/payload handling flight design

    Science.gov (United States)

    Homan, D. J.

    1984-01-01

    A computer program, the Multi-Adaptive Drawings, Renderings and Similitudes (MADRAS) program, is discussed. The modeling program, written for a desktop computer system (the Hewlett-Packard 9845/C), is written in BASIC and uses modular construction of objects while generating both wire-frame and hidden-line drawings from any viewpoint. The dimensions and placement of objects are user definable. Once the hidden-line calculations are made for a particular viewpoint, the viewpoint may be rotated in pan, tilt, and roll without further hidden-line calculations. The use and results of this program are discussed.

  20. Improving "tail" computations in a BOINC-based Desktop Grid

    Science.gov (United States)

    Kolokoltsev, Yevgeniy; Ivashko, Evgeny; Gershenson, Carlos

    2017-12-01

    A regular Desktop Grid bag-of-tasks project can take a lot of time to complete computations. An important part of the process is tail computations: when the number of tasks to perform becomes less than the number of computing nodes. At this stage, a dynamic replication could be used to reduce the time needed to complete computations. In this paper, we propose a mathematical model and a strategy of dynamic replication at the tail stage. The results of the numerical experiments are given.

  1. Efficient Sustainable Operation Mechanism of Distributed Desktop Integration Storage Based on Virtualization with Ubiquitous Computing

    Directory of Open Access Journals (Sweden)

    Hyun-Woo Kim

    2015-06-01

    Full Text Available Following the rapid growth of ubiquitous computing, many jobs that were previously manual have now been automated. This automation has increased the amount of time available for leisure; diverse services are now being developed for this leisure time. In addition, the development of small and portable devices like smartphones, diverse Internet services can be used regardless of time and place. Studies regarding diverse virtualization are currently in progress. These studies aim to determine ways to efficiently store and process the big data generated by the multitude of devices and services in use. One topic of such studies is desktop storage virtualization, which integrates distributed desktop resources and provides these resources to users to integrate into distributed legacy desktops via virtualization. In the case of desktop storage virtualization, high availability of virtualization is necessary and important for providing reliability to users. Studies regarding hierarchical structures and resource integration are currently in progress. These studies aim to create efficient data distribution and storage for distributed desktops based on resource integration environments. However, studies regarding efficient responses to server faults occurring in desktop-based resource integration environments have been insufficient. This paper proposes a mechanism for the sustainable operation of desktop storage (SODS for high operational availability. It allows for the easy addition and removal of desktops in desktop-based integration environments. It also activates alternative servers when a fault occurs within a system.

  2. Aesthetic quality inference for online fashion shopping

    Science.gov (United States)

    Chen, Ming; Allebach, Jan

    2014-03-01

    On-line fashion communities in which participants post photos of personal fashion items for viewing and possible purchase by others are becoming increasingly popular. Generally, these photos are taken by individuals who have no training in photography with low-cost mobile phone cameras. It is desired that photos of the products have high aesthetic quality to improve the users' online shopping experience. In this work, we design features for aesthetic quality inference in the context of online fashion shopping. Psychophysical experiments are conducted to construct a database of the photos' aesthetic evaluation, specifically for photos from an online fashion shopping website. We then extract both generic low-level features and high-level image attributes to represent the aesthetic quality. Using a support vector machine framework, we train a predictor of the aesthetic quality rating based on the feature vector. Experimental results validate the efficacy of our approach. Metadata such as the product type are also used to further improve the result.

  3. Fashion and the semiotics of gender

    Directory of Open Access Journals (Sweden)

    Iva Jestratijević

    2016-03-01

    Full Text Available Contemporary studies of fashion interpret articles of clothing as text, through which a specific cultural identity is constructed and expressed. As identities are momentarily realized through the performative act of identifying with a real or ideal subject, fashion has a special significance in every visual creation of a subject as the identity of a given role. In accordance with this, the dressing of the body is viewed as one of the available means of gender identification, as well as a way to confirm the subject through the performing of the assigned role of man and woman. Seeing as the performance of a certain role, in this specific case, entails the existence of the subject as event (of a textual role, the sphere of clothing fashion is in this paper primarily connected to the sphere of representing the subject as member of a gender category. Clothing is viewed as one in a slew of instruments of gender naturalization, in the sense of the power which clothing has for upholding, performing and displaying the stability of gender norms. Hence, this paper will consider always current issues of the existence of established boundaries of male and female fashion, male and female clothing ornaments and colors, as well as socially acceptable male and female forms of clothing.

  4. Distributed Leadership as Fashion or Fad

    Science.gov (United States)

    Lumby, Jacky

    2016-01-01

    Despite frequently expressed reservations concerning its fundamental theoretical weakness, distributed leadership (DL) has grown to become the preferred leadership concept and has acquired taken-for-granted status. This article suggests that the dominance of DL can best be understood as a fashion or fad rather than as a rational choice. It…

  5. Teaching for Creativity through Fashion Design

    Science.gov (United States)

    MacDonald, Nora M.; Bigelow, Susan

    2010-01-01

    In today's high technology, globally interdependent world, we must educate students to achieve to their highest capacity. The goal of this middle school fashion design project was to develop a classroom environment that promoted teaching for creativity. We examined the following questions. What was the students' perception of their (a)…

  6. Fashion Marketing. Florida Vocational Program Guide.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Instructional Development and Services.

    This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in fashion marketing in school districts, area vocational centers, and community colleges. The following topics are covered: program content (job duties of wholesale and retail clothing salespersons and curriculum framework and student…

  7. Fenomena Intertekstualitas Fashion Karnaval di Nusantara

    Directory of Open Access Journals (Sweden)

    Lois Denissa

    2016-12-01

    ABSTRAK   Merebaknya fashion karnaval di Nusantara dan berbagai genre lain dipicu oleh keberadaan Jember Fashion Carnaval. Michael Bahtin menyebut fenomena ini sebagai intertekstualitas yaitu ketergantungan satu teks dengan teks lain, sehingga keberadaan sebuah teks selalu dipengaruhi oleh teks sebelumnya. Teori intertekstualitas ini mengubah pandangan orang terhadap proses pengutipan karya dan melahirkan kritik terhadap karya yang mengedepankan otentisitas dan orisinalitas. Penelitian menggunakan pendekatan kualitatif interpretastif dengan menganalisis bagaimana perkembangan Jember Fashion Carnaval mempengaruhi merebaknya karnaval seru- pa di kota lain dan bangkitnya respon positif genre-genre seni untuk berkiprah bersama. Kon- sistensinya telah menjadi magnit bagi fotografer, media, pameran fotografi, lukisan, kuliner dan industri kreatif lokal. Terbentuknya Asosiasi Karnaval Indonesia, tergabungnya tujuh propinsi dalam Wonderful Archipelago Carnival Indonesia  dan Jember menjadi tuan rumah etalase karna- val Nusantara. Hasil penelitian ini menginterpretasikan bahwa proses interteks-tualitas kostum pada karnaval merupakan perspektif yang positif karena kemampuannya mengaktifkan genre seni sejenis maupun berbeda sehingga menciptakan medan karnaval yang kondusif.   Kata kunci: Intertekstualitas, Jember Fashion Carnaval, Medan Karnaval

  8. A Future in Fashion: Designing Wearable Art

    Science.gov (United States)

    Brew, Charl Anne

    2009-01-01

    Art instructors are ever mindful of the need to introduce and encourage the possibilities of careers in the art field. The longer the author has been teaching art, the more aware she has become of the many wonderful art-related jobs and careers that exist. Fashion design, marketing and retail are three areas in which many students--male and…

  9. The interconnected fashion industry - an integrated vision

    Science.gov (United States)

    Papahristou, E.; Kyratsis, P.; Priniotakis, G.; Bilalis, N.

    2017-10-01

    The internet of things (IoT) is transforming everyday physical objects that surround us into an ecosystem of information that is rapidly changing the way we live our lives. Any physical product can be more intelligent, more interactive, more trackable and more valuable by being connected via IoT. All industries, including Fashion, are expecting that the IoT will make real quantifiable impact that can be quickly translated into positive ROI for the business, and equally a positive return for consumers. In our research on the integration of 3D virtual prototype in the Textile and Clothing sector, IoT was of particular interest. The research was contacted using a combination of primary and secondary sources. First hand interviews to explore the impact of recent technology applications in the design and production of fashion products and the areas which are going to benefit most. The research has included several questions to interviewees who are executives in fashion companies or industry entrepreneurs with the aim to investigate what IoT represents and attempts to understand how IoT can support Fashion Design, Development and procurement as well as manufacturing.

  10. MICA: desktop software for comprehensive searching of DNA databases

    Directory of Open Access Journals (Sweden)

    Glick Benjamin S

    2006-10-01

    Full Text Available Abstract Background Molecular biologists work with DNA databases that often include entire genomes. A common requirement is to search a DNA database to find exact matches for a nondegenerate or partially degenerate query. The software programs available for such purposes are normally designed to run on remote servers, but an appealing alternative is to work with DNA databases stored on local computers. We describe a desktop software program termed MICA (K-Mer Indexing with Compact Arrays that allows large DNA databases to be searched efficiently using very little memory. Results MICA rapidly indexes a DNA database. On a Macintosh G5 computer, the complete human genome could be indexed in about 5 minutes. The indexing algorithm recognizes all 15 characters of the DNA alphabet and fully captures the information in any DNA sequence, yet for a typical sequence of length L, the index occupies only about 2L bytes. The index can be searched to return a complete list of exact matches for a nondegenerate or partially degenerate query of any length. A typical search of a long DNA sequence involves reading only a small fraction of the index into memory. As a result, searches are fast even when the available RAM is limited. Conclusion MICA is suitable as a search engine for desktop DNA analysis software.

  11. Desktop-VR system for preflight 3D navigation training

    Science.gov (United States)

    Aoki, Hirofumi; Oman, Charles M.; Buckland, Daniel A.; Natapoff, Alan

    Crews who inhabit spacecraft with complex 3D architecture frequently report inflight disorientation and navigation problems. Preflight virtual reality (VR) training may reduce those risks. Although immersive VR techniques may better support spatial orientation training in a local environment, a non-immersive desktop (DT) system may be more convenient for navigation training in "building scale" spaces, especially if the two methods achieve comparable results. In this study trainees' orientation and navigation performance during simulated space station emergency egress tasks was compared while using immersive head-mounted display (HMD) and DT-VR systems. Analyses showed no differences in pointing angular-error or egress time among the groups. The HMD group was significantly faster than DT group when pointing from destination to start location and from start toward different destination. However, this may be attributed to differences in the input device used (a head-tracker for HMD group vs. a keyboard touchpad or a gamepad in the DT group). All other 3D navigation performance measures were similar using the immersive and non-immersive VR systems, suggesting that the simpler desktop VR system may be useful for astronaut 3D navigation training.

  12. 3d visualization of atomistic simulations on every desktop

    International Nuclear Information System (INIS)

    Peled, Dan; Silverman, Amihai; Adler, Joan

    2013-01-01

    Once upon a time, after making simulations, one had to go to a visualization center with fancy SGI machines to run a GL visualization and make a movie. More recently, OpenGL and its mesa clone have let us create 3D on simple desktops (or laptops), whether or not a Z-buffer card is present. Today, 3D a la Avatar is a commodity technique, presented in cinemas and sold for home TV. However, only a few special research centers have systems large enough for entire classes to view 3D, or special immersive facilities like visualization CAVEs or walls, and not everyone finds 3D immersion easy to view. For maximum physics with minimum effort a 3D system must come to each researcher and student. So how do we create 3D visualization cheaply on every desktop for atomistic simulations? After several months of attempts to select commodity equipment for a whole room system, we selected an approach that goes back a long time, even predating GL. The old concept of anaglyphic stereo relies on two images, slightly displaced, and viewed through colored glasses, or two squares of cellophane from a regular screen/projector or poster. We have added this capability to our AViz atomistic visualization code in its new, 6.1 version, which is RedHat, CentOS and Ubuntu compatible. Examples using data from our own research and that of other groups will be given

  13. SERVICE HANDBOOK FOR THE DESKTOP SUPPORT CONTRACT WIH IT DIVISION

    CERN Document Server

    2000-01-01

    A Desktop Support Contract has been running since January 1999 to offer help to all users at CERN with problems that occur with their desktop computers. The contract is run conjointly by the Swedish Company WM-data and the Swiss company DCS.The contract is comprised of the Computing Helpdesk, a General Service for all parts of CERN and also Local Service for those divisions and groups that want faster response times and additional help with their specific computer environment.In order to describe what services are being offered, and also to give a better understanding of the structure of the contract, a Service Handbook has been created. The intended audience for the Service Handbook is everyone that is using the contract, i.e. users, managers and also the service staff inside the contract. In the handbook you will find what help you can get from the contract, how to get in touch with the contract, and also what response times you can expect. Since the computer environment at CERN is a never-changing entity, ...

  14. Fashion District Arnhem: creative entrepreneurs upgrading a deprived neighbourhood

    NARCIS (Netherlands)

    Jacobs, D.; Lentjes, E.; Ruiten, E.; Marques, L.; Richard, G.

    2014-01-01

    The Arnhem Fashion District, which started in 2005, offers workspaces, shops and places to live for fashion designers. More than fifty fashion designers and other creative entrepreneurs have located their business in this neighbourhood. For a few years most of the fashion chain has been present:

  15. A note on fashion cycles, novelty and conformity

    OpenAIRE

    Federica Alberti

    2013-01-01

    We develop a model in which novelty and conformity motivate fashion behavior. Fashion cycles occur if conformity is not too high. The duration of fashion cycles depends on individual-specific conformity, novelty, and the number of available styles. The use of individual-specific novelty and conformity allows us to also identify fashion leaders.

  16. Globalization of the Fashion Industry and Its Effects on Ghanaian ...

    African Journals Online (AJOL)

    Strategies suggested for the improvement of the Ghanaian fashion business include; formation of strong alliance by all fashion producers in Ghana to influence the government to formulate policies that will address importation of fashion goods that compete unfairly with the Ghanaian fashion products, provide financial ...

  17. Fashion Budaya Nasional dalam Konteks Wawasan Kebangsaan: Studi Kasus pada Jember Fashion Carnaval

    Directory of Open Access Journals (Sweden)

    Agustinus Tampubolon

    2016-04-01

    Full Text Available Penelitian ini bertujuan untuk menjelaskan konstruksi makna fashion yang berkaitan dengan konsep wawasan kebangsaan. Desain penelitian yang digunakan adalah kualitatif dengan metode fenomenologi. Teknik pengumpulan data dilakukan dengan wawancara, observasi mendalam dan studi dokumentasi.Hasil penelitian menunjukkan bahwa:(1 hal-hal yang diungkapkan fashion sebagai penguat wawasan kebangsaan melalui Jember FashionCarnaval (JFC berkaitan dengan aspek kreativitas, tema, dan simbol-simbol dalam kostum karnaval;(2 pesan fashion berkaitan dengan wawasan kebangsaan karena memuat nilai-nilai persatuan dan kesatuan yang dilandasi semangat dan usaha rela berkorban. Pesan menggambarkan bagaimana konstruksi nilai-nilai kebangsaan yang dimiliki secara bersama-sama dapat dijadikan sebagai pedoman hidup antarmasyarakat berbangsa dan bernegara;(3 proses mengonstruksi nilai-nilai kebangsaan melalui fashion ditunjukkan dengan partisipasi atau keterlibatan secara aktif dan bertanggung jawab dalam mengikuti program pelatihan dan pembimbingan. Program yang disebut In House Training selama lima bulan menjelang pelaksanaan JFC meliputi pemilihan tema berdasarkan riset dan pengkajian sampai pada acara puncak, yaitu grand carnival.   The Fashion of National Culture in the Context of National Insight : CaseStudy on Jember Fashion Carnaval. This study aims to explain the construction meaning of fashion related to the concept of national insight. The study is qualitative with phenomenological method. Data collection technique was carried out by interviews, in-depth observation, and documentation studies. The results show that: (1 disclosed matters of the fashion as a reinforcement of the concept of national insight through Jember Fashion Carnaval (JFC deal with aspects of creativity, themes, and symbols in carnival costume; (2 the fashion statement relates to the concept of national insight because it contains the values of unity and the spirit of understanding and self

  18. ZARA-INDITEX AND THE GROWTH OF FAST FASHION

    Directory of Open Access Journals (Sweden)

    Stephanie O. Crofton

    2007-01-01

    Full Text Available This paper presents the “fastfashion” model, its historical development, and its prospects. Fast fashion departs from traditional norms of designer-led fashion seasons, using instead designers who adapt their creations to customer demands on an ongoing basis. From its origins in Galicia, Spain, in the 1960s fast fashion changed the fashion industry. With annual sales of $8 billion in 2005, Inditex, the leading practitioner of fast fashion, is now the second-largest fashion company in the world and operates over 2,700 stores in over sixty countries. As Inditex grows, many other fashion companies are copying its unique business model.

  19. Fundamental Research on the Relationship between Fashion and Media

    OpenAIRE

    古賀, 令子; 濱田, 勝宏; 謝, 黎; 田中, 里尚; 北方, 晴子

    2010-01-01

    This research aims to clarify the state of the relationship between fashion and media to grasp the present state of the fashion environment and fashion media. For this, we brought up the following five issues, and held a symposium titled “Think about Fashion and Media”on September 26, 2009.The five issues are:(1) How has the fashion system changed since 21st century?(2) How has the role of fashion media changed in the fashion system?(3) The globalization of the web network and the subject and...

  20. Sustainable Development of Slow Fashion Businesses: Customer Value Approach

    Directory of Open Access Journals (Sweden)

    Sojin Jung

    2016-06-01

    Full Text Available As an alternative to the prevalent fast fashion model, slow fashion has emerged as a way of enhancing sustainability in the fashion industry, yet how slow fashion can enhance profitability is still largely unknown. Based on a customer value creation framework, this study empirically tested a structural model that specified the slow fashion attributes that contribute to creating perceived customer value, which subsequently increases a consumer’s intention to buy and pay a price premium for slow fashion products. An analysis of 221 U.S. consumer data revealed that delivering exclusive product value is significantly critical in creating customer value for slow fashion, and customer value, in turn, positively affects consumers’ purchase intentions. Further analysis also revealed that different slow fashion attributes distinctively affect customer value. This provides potential strategies on which slow fashion businesses can focus to secure an economically sustainable business model, thereby continuously improving environmental and social sustainability with the slow fashion ideal.

  1. Technical Skill, Industry Knowledge and Experience, and Interpersonal Skill Competencies for Fashion Design Careers: A Comparison of Perspectives between Fashion Industry Professionals and Fashion Educators

    Science.gov (United States)

    Yang, Eunyoung

    2010-01-01

    In updating fashion and apparel related design programs, many educators are striving to address the perspective of the fashion industry to obtain the career-specific skill and knowledge requirements sought by employers when hiring college or university graduates. Identifying such competencies from the view of fashion industry professionals as well…

  2. Medicine and diseases or fashion and consumerism?

    Directory of Open Access Journals (Sweden)

    Ignacio Jáuregui-Lobera

    2017-02-01

    Full Text Available The concept of diet in the classical Greece must be understood not only as a style of feeding, but rather as the way of life and the individual’s reality in its global complexity. Since ancient times things have changed radically and the specific concept of diet has left the world of medicine to become a sort of mass entertainment. This phenomenon, along with the idolatry of chasing a perfect body and permanent youth, has lead to many lifestyles focused on the triad food-beauty-youth thus emerging progressive psychophysical alterations, sometimes severe and in other cases almost an argument of comedy. This work aims to create the necessary awareness in order to get that medicine returns to patients and pathologies and fashions and consumption do not become pseudo-disorders for which many "remedies" are also designed. Many times after these lifestyles there are only fashion and consumerism.

  3. Innovation in Downstream Fashion Retail Networks

    DEFF Research Database (Denmark)

    Tambo, Torben

    2012-01-01

    While product marketers and brand owners struggle to make new products, manufacturing processes and inbound logistics, innovation taking place in retail networks is often overlooked. Networks in retailing are comprised by varieties of single- and multi-brand stores, chains and departments stores......, technology and service providers, ownership structures and local level supply chain facilities. This paper analyses theoretical and empirical views of innovation in international retail networks using the fashion industry as a case because this industry better than other industries maintain branded stores......-depth studies of the biggest Danish fashion brand owners and their respective retail networks. The study shows how brand owners can emphasise change by shifting from a passive and narrow observation of its downstream retail network to an active and broad observation, or at least develop a conscious approach...

  4. Space In Fashion Design – Ƒ2 (Fabiani Fashion) Case Study

    OpenAIRE

    Devetak, Tanja

    2016-01-01

    TThese research inquiries into the transformation of complex architectural spatial objects into contemporary garments by implementing creative pattern cutting as an integrated part of the fashion design process. From the architecture design process, a creative process of generating ideas using the human body as the centre point of the creative process, and an understanding of the envelope around that space were implemented and researched in fashion design. A creative construction method evolv...

  5. Korea Vs Paris: There is no Fashion, Only Image or How to Make Fashion Identity

    OpenAIRE

    Ling, Wessie

    2016-01-01

    It is true, to a certain extent, that "the identity of a fashion centre is constituted not by a particular national style or regional costume, but by the localised capabilities that produce new styles or redefine old ones. Such capabilities include the presence of key industry activities – production, design marketing and distribution… [and] the interaction and coordination between industry actors" (Rantisi 2015: 261). For a viable fashion centre, several key factors are believed to be fundam...

  6. Celebrity endorsement in fashion print advertising

    OpenAIRE

    Raluca Chiosa

    2013-01-01

    Brands ofen use celebrities to get impact. Celebrity endorsement has become a marketing communication strategy used to build a congruence between brand image and consumers. Objectives. Research attempts to analyse celebrity endorser-product congruency and to measure the effectiveness of celebrity endorsement compared with a non-celebrity endorsement (fashion models). Prior Work. Research conducted to date have reached topics as: the effectiveness of celebrity endorsement; celebrity endorsers ...

  7. Style in knitted textiles and fashion

    Science.gov (United States)

    Štemberger, M.; Pavko-Čuden, A.

    2017-10-01

    The presented research relates the basic elements of the art theory with the concept of style and fashion design. The objective of the research was to determine how style is manifested in knitting in different periods of fashion seasons. The collections of three designers were compared: Missoni, Issey Miyake and Sonia Rykiel, in four different seasons in three different years. The basic artistic elements used in the presented research were: point, line, light-dark and colour together with syntactic rules. A combination of different elements and syntactic rules refers to different artistic languages, which have their own artistic grammar, i.e. a different style. All three investigated fashion designers used knitting in their collections as a significant element which defined their style. Different knitting technologies as well as different yarns made of synthetic or natural fibres in all colour spectra significantly influence the surface of a knitted fabric. Even when the technology is the same, the use of different materials, structures, colours, etc. creates various unique surfaces. The method used in the presented research was a style matrix which is developed from the axiomatic system. Only the part dealing with the language of fine arts and the pictorial speech – the style of a certain designer and a certain work of art/knitted fabric was used. After the selected three designers were examined through all the periods, it was concluded that each designer can be characterised by his own style. Despite the influencing fashion trends, all the compared designers still retained their own style, their own techniques, their own inspirations.

  8. Fusion Culture : Fashion beyond Orientalism and Occidentalism

    OpenAIRE

    Lehnert, Gertrud; Mentges, Gabriele

    2017-01-01

    Tagungsbericht zu 'Fusion Culture: Fashion beyond Orientalism and Occidentalism', Universität Potsdam, 5. bis 7. November 2009 Die von Gabriele Mentges (Dortmund) und Gertrud Lehnert (Potsdam) veranstaltete und von der Volkswagen Stiftung geförderte Tagung befasste sich mit dem Thema 'Orientalismus und Mode' zum einen unter historischen Aspekten, zum anderen unter gegenwärtigen Bedingungen, in denen von 'Orientalismus' kaum noch die Rede sein kann. Denn längst haben wechselseitige Bezüge ...

  9. SWOT Analysis: A Management Fashion Perspective

    OpenAIRE

    Madsen , Dag Øivind

    2016-01-01

    International audience; SWOT analysis has over a period spanning several decades enjoyed considerable popularity in the business community. In this paper management fashion theory is used as a theoretical lens to understand the history and evolution of SWOT as a management idea. The analysis shows that SWOT's evolution pattern diverges in several respects from that of other comparable management ideas. The findings from the analysis have several implications for research on SWOT and, more gen...

  10. Alternative route of process modification for biofuel production by embedding the Fischer–Tropsch plant in existing stand-alone power plant (10 MW) based on biomass gasification – Part I: A conceptual modeling and simulation approach (a case study in Thailand)

    International Nuclear Information System (INIS)

    Hunpinyo, Piyapong; Cheali, Peam; Narataruksa, Phavanee; Tungkamani, Sabaithip; Chollacoop, Nuwong

    2014-01-01

    Graphical abstract: SynBiofuel production through existing gasification plants in Thailand, using waste agricultural biomass as raw material, was studied. The process design was initiated conceptually in the areas of gas phase reaction system via Fischer-Tropsch (FT) synthesis. The development of FT configurations on syngas conversion to transportation fuels (e.g., diesel range) was investigated. In order to develop a techno-economic assessment, the three different capacities corresponding to 1 MW, 2 MW and 3 MW based on thermal input of syngas were evaluated. Once-through FT concept was proposed in which the unconverted syngas was combusted with air in an externally fired gas turbine (EFGT) to produce surplus electricity. The results of process simulation were discussed open-mindedly including the overall plant design and energy efficiency. Preliminary economics, and some site specific situations under which additional capital cost savings on existing infrastructure was realized. - Highlights: • Experimental results were used and integrated with a reactor model for SynBiofuel. • Process simulation with the lumped reaction rate was used to achieve accurate results. • Process simulation was performed using ASPEN Plus to design FT configurations. • Maximum energy FT efficiency was approximately 37%. • Economic potential was computed by ROI and PBP resulting in the attractive solutions. - Abstract: The utilization of syngas shows a highly potential to improve the economic potential of the stand-alone power unit-based gasification plants as well as enhancing the growing demand of transportation fuels. The thermochemical conversion of biomass via gasification to heat and power generations from the earlier study is further enhanced by integrating Fischer–Tropsch (FT) synthesis with the existing gasification pilot scale studied previously. To support the potential and perspectives in major economies due to scaling up in developing countries such as Thailand

  11. Online referral and OPD booking from the GP desktop.

    Science.gov (United States)

    Nicholson, Caroline; Jackson, Claire L; Wright, Bernadette; Mainwaring, Paul; Holliday, Dimity; Lankowski, Andrew; Kardash, Christine

    2006-08-01

    The Brisbane Inner South E-referral Project (BISEP) developed an application which allowed general practitioners, from their desktop, to successfully search for and book an available hospital outpatient appointment for patients with suspected cancer, send the referral electronically, and inform the patient of both the appointment and referral during the consultation. The hospital changed their outpatient department processes to allow such functionality for local GPs with patients with suspected cancer, working from a mutually agreed set of best practice referral criteria. A group of 19 GPs participated in an 11-week pilot implementation of the application, and were enthusiastic about continuing and expanding the approach. Patient satisfaction measures post intervention indicated that they perceived no major disadvantage in this form of outpatient department referral.

  12. Desk-top microcomputer for lab-scale process control

    International Nuclear Information System (INIS)

    Overman, R.F.; Byrd, J.S.; Goosey, M.H.; Sand, R.J.

    1981-01-01

    A desk-top microcomputer was programmed to acquire the data from various process control sensors installed in a laboratory scale liquid-liquid extraction, pulse column facility. The parameters monitored included valve positions, gamma spectra, alpha radioactivity, temperature, pH, density, and flow rates. The program for the microcomputer is written in BASIC and requires about 31000 8-bit bytes of memory. All data is stored on floppy discs, and can be displayed or printed. Unexpected data values are brought to the process operator's attention via CRT display or print-out. The general organization of the program and a few subroutines unique to polling instruments are explained. Some of the data acquisition devices were designed and built at the Savannah River Laboratory. These include a pulse height analyzer, a data multiplexer, and a data acquisition instrument. A general description of the electronics design of these instruments is also given with emphasis placed on data formatting and bus addressing

  13. Direct Desktop Printed-Circuits-on-Paper Flexible Electronics

    Science.gov (United States)

    Zheng, Yi; He, Zhizhu; Gao, Yunxia; Liu, Jing

    2013-05-01

    There currently lacks of a way to directly write out electronics, just like printing pictures on paper by an office printer. Here we show a desktop printing of flexible circuits on paper via developing liquid metal ink and related working mechanisms. Through modifying adhesion of the ink, overcoming its high surface tension by dispensing machine and designing a brush like porous pinhead for printing alloy and identifying matched substrate materials among different papers, the slightly oxidized alloy ink was demonstrated to be flexibly printed on coated paper, which could compose various functional electronics and the concept of Printed-Circuits-on-Paper was thus presented. Further, RTV silicone rubber was adopted as isolating inks and packaging material to guarantee the functional stability of the circuit, which suggests an approach for printing 3D hybrid electro-mechanical device. The present work paved the way for a low cost and easygoing method in directly printing paper electronics.

  14. GRID : unlimited computing power on your desktop Conference MT17

    CERN Multimedia

    2001-01-01

    The Computational GRID is an analogy to the electrical power grid for computing resources. It decouples the provision of computing, data, and networking from its use, it allows large-scale pooling and sharing of resources distributed world-wide. Every computer, from a desktop to a mainframe or supercomputer, can provide computing power or data for the GRID. The final objective is to plug your computer into the wall and have direct access to huge computing resources immediately, just like plugging-in a lamp to get instant light. The GRID will facilitate world-wide scientific collaborations on an unprecedented scale. It will provide transparent access to major distributed resources of computer power, data, information, and collaborations.

  15. Visual attention for a desktop virtual environment with ambient scent.

    Science.gov (United States)

    Toet, Alexander; van Schaik, Martin G

    2013-01-01

    In the current study participants explored a desktop virtual environment (VE) representing a suburban neighborhood with signs of public disorder (neglect, vandalism, and crime), while being exposed to either room air (control group), or subliminal levels of tar (unpleasant; typically associated with burned or waste material) or freshly cut grass (pleasant; typically associated with natural or fresh material) ambient odor. They reported all signs of disorder they noticed during their walk together with their associated emotional response. Based on recent evidence that odors reflexively direct visual attention to (either semantically or affectively) congruent visual objects, we hypothesized that participants would notice more signs of disorder in the presence of ambient tar odor (since this odor may bias attention to unpleasant and negative features), and less signs of disorder in the presence of ambient grass odor (since this odor may bias visual attention toward the vegetation in the environment and away from the signs of disorder). Contrary to our expectations the results provide no indication that the presence of an ambient odor affected the participants' visual attention for signs of disorder or their emotional response. However, the paradigm used in present study does not allow us to draw any conclusions in this respect. We conclude that a closer affective, semantic, or spatiotemporal link between the contents of a desktop VE and ambient scents may be required to effectively establish diagnostic associations that guide a user's attention. In the absence of these direct links, ambient scent may be more diagnostic for the physical environment of the observer as a whole than for the particular items in that environment (or, in this case, items represented in the VE).

  16. Turbulence Visualization at the Terascale on Desktop PCs

    KAUST Repository

    Treib, M.

    2012-12-01

    Despite the ongoing efforts in turbulence research, the universal properties of the turbulence small-scale structure and the relationships between small-and large-scale turbulent motions are not yet fully understood. The visually guided exploration of turbulence features, including the interactive selection and simultaneous visualization of multiple features, can further progress our understanding of turbulence. Accomplishing this task for flow fields in which the full turbulence spectrum is well resolved is challenging on desktop computers. This is due to the extreme resolution of such fields, requiring memory and bandwidth capacities going beyond what is currently available. To overcome these limitations, we present a GPU system for feature-based turbulence visualization that works on a compressed flow field representation. We use a wavelet-based compression scheme including run-length and entropy encoding, which can be decoded on the GPU and embedded into brick-based volume ray-casting. This enables a drastic reduction of the data to be streamed from disk to GPU memory. Our system derives turbulence properties directly from the velocity gradient tensor, and it either renders these properties in turn or generates and renders scalar feature volumes. The quality and efficiency of the system is demonstrated in the visualization of two unsteady turbulence simulations, each comprising a spatio-temporal resolution of 10244. On a desktop computer, the system can visualize each time step in 5 seconds, and it achieves about three times this rate for the visualization of a scalar feature volume. © 1995-2012 IEEE.

  17. From COP15 to Copenhagen Fashion Week

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup

    Mobile application has become an important parameter when it comes to presenting possibilities for small handheld devices such as mobile phones. One of the trends within mobile application development is applications for special events such as sports, conferences and TV shows. The purpose...... of this paper is to present and discuss the challenges of developing event applications with a strong involvement of users. The concepts and characteristics of the Living Lab approach has been used to develop an event application for the Copenhagen Fashion Festival 2010. As part of the development process...

  18. Dreams of Small Nations in a Polycentric Fashion World

    DEFF Research Database (Denmark)

    Skov, Lise

    2011-01-01

    Fashion production has been split between a globalized clothing industry, which tends towards extreme centralization, and localized designer fashion sectors, acting as intermediaries between international suppliers and national events, media, and public. Under these conditions, designer fashion...... takes on national significance, in terms of staging events and displays, and engaging with cultural references outside the field of fashion. This article explores how such place-making abilities structure the polycentric world of fashion, taking the United Nations Security Council as a model...... for the interaction between first- and second-tier fashion cities. The article analyzes the rhetoric of new fashion centers as a traveling discourse that detaches fashion design from the concerns of textile and clothing industries and links it with those of cultural institutions and governments. It also examines how...

  19. Fashion Brand Purity and Firm Performance

    Directory of Open Access Journals (Sweden)

    Jin-hui Zheng

    2013-01-01

    Full Text Available A large number of prior empirical research and case studies used qualitative methodology to discuss the fashion brand dilution resulting from consumer base extension from the target group(s to the nontarget groups and its impacts. From a different perspective, this paper establishes a dynamic brand dilution and performance model, demonstrating how dynamic changes of sales volumes involving the two consumer groups affect the degree of brand dilution and the performance of the brand. We incorporate the factor “brand purity” to the model as a quantitative measure of brand dilution level that affects firm annual revenue and profit change comprehensively in iteration. Our model suggests that fashion brands, especially luxury brands, can be easily diluted under the pressure of firm growth, and the brands suffer the significant negative impact on their revenues and profit. While increasing sales volume can aggravate the negative consequences, brand purity can be increased through limiting the consumer base to the target group only.

  20. Celebrity endorsement in fashion print advertising

    Directory of Open Access Journals (Sweden)

    Raluca Chiosa

    2013-05-01

    Full Text Available Brands ofen use celebrities to get impact. Celebrity endorsement has become a marketing communication strategy used to build a congruence between brand image and consumers. Objectives. Research attempts to analyse celebrity endorser-product congruency and to measure the effectiveness of celebrity endorsement compared with a non-celebrity endorsement (fashion models. Prior Work. Research conducted to date have reached topics as: the effectiveness of celebrity endorsement; celebrity endorsers and purchase intention, added-value of the endorsement; positive or negative effects of celebrity endorsement, congruence between product/brand and endorser, consumer association with the endorser, attractiveness, credibility and trust in celebrities. Approach. A marketing experiment was used in order to mesure the impactul of endorser type and endorser-product match on Aad, Ab, and Pi. Results. Research has confirmed that attractive endorsers fit clothing products, whether they are celebrities or models. Also, the more consumer likes advertising, the more likely it creates a favorable attitude towards the brand. Results suggest ads using celebrities increase the likelihood of consumers to buy an endorsed product. Value. Study shows what celebrities are considered credible and perceived fit to promote classical suit. A fashion brand can select a celebrity for advertising campaign, due to it’s influence on consumers’ purchase intention.

  1. Luxury fashion brands: factors influencing young female consumers’ luxury fashion purchasing in Taiwan

    OpenAIRE

    Wu, Meng-Shan Sharon; Chaney, Isabella; Chen, Cheng-Hao Steven; Nguyen, Bang; Melewar, T. C.

    2015-01-01

    Purpose - Against the background of increasing consumption of luxury fashion brands by young female consumers in Asian countries, this paper offers insights into the consumption motives and purchasing behaviour of that market segment in Taiwan.\\ud \\ud Design/methodology/approach - Analysis of data collected using face-to-face semi-structured interviews with twenty-three 18-32 year-old fashion-conscious females was completed and new empirical insights are offered.\\ud \\ud Findings - The study f...

  2. The disintegration of body: contemporary fashion and new media

    OpenAIRE

    Krpan, Petra

    2013-01-01

    The work, titled The Disintegration of Body: Contemporary Fashion and New Media explores the possibilities of body as a subject of contemporary fashion within new media. Can we still speak of the subject of contemporary fashion in the era of new media? Applying various theoretical frameworks by – respectively – Jean Baudrillard, Roland Barthes, Gilles Lipovetsky, Yuni Kawamura and others, this work aims to demonstrate a manner in which the fragmentation of identity in contemporary fashion ari...

  3. Antonio Lopez: Fashion, Art, Sex & Disco

    DEFF Research Database (Denmark)

    Langkjær, Michael Alexander

    2014-01-01

    Book review. Roger Padilha and his brother Mauricio may already be familiar to some as the New York-based fashion publicists, creators of the fashion public relations agency MAO PR, and as authors of The Stephen Sprouse Book (Rizzoli, 2009). Antonio Lopez: Fashion, Art, Sex & Disco, their second...

  4. Fashion beyond identity: The three ecologies of dress

    NARCIS (Netherlands)

    Breuer, R.L.A.

    2015-01-01

    The purpose of this book is to move beyond the association of fashion with the mere representation of identity. Fashion should be understood as much more than that. The book argues that we should view fashion through a heterogeneous prism, one that enables us to think critically about the

  5. Fabulous Fashions: Links to Learning, Literacy, and Life

    Science.gov (United States)

    Thompson, Anne L.

    2005-01-01

    Fabulous Fashions is a program established in 2000 for fifth through eighth graders attending high-need school, M.S. 127, in the Castle Hill section of the Bronx. Within the program, fashion design is offered three times a week; students who enroll are required to attend all three sessions. Students may participate in as many seasons of fashion as…

  6. UPAYA PENINGKATAN EXPORT DRIVE INDUSTRI FASHION DI ERA GLOBALISASI

    Directory of Open Access Journals (Sweden)

    Idah Hadijah

    2014-05-01

    Full Text Available The Efforts to Increase Export Drives of Fashion Industy in the Globali­sation Era. The fashion industry is inseparable from the development of fashion, cultural element/national culture, and the influence of fashion in many aspects of human life. Thus, fashion industry is a positive business opportunities in globalization era. Fashion industry involves various parties such as the resource of fabric thread, fabric manufacturers, designer, producers to distributors, starts from small business to large business, and also involves a lot of workers with various skills and talents. In order to support fashion industry producers having positive export drives, it is necessary to to pay attention to many components, such as production, supplier, and the final products that are distributed to the retailers. These components are also related to the quality of human resources, material resources, fashion forecasting, and the multimedia of fashion industry. : Industri fashion, tidak terlepas dari perkembangan busana, unsur budaya/ kultur suatu bangsa, serta pengaruh busana dalam berbagai aspek kehidupan manusia. Dengan demikian industri fashion merupakan peluang bisnis yang positif di era globalisasi. Industri fashion melibatkan berbagai pihak mulai dari asal serat, pem­buatan kain, desainer, produsen sampai distributor, mulai dari bisnis kecil sampai bisnis besar, juga melibatkan banyak pekerja dengan berbagai keahlian dan bakat. Upaya produsen industri fashion agar memiliki export drive yang positif, perlu memperhatikan komponen produksi, komponen supplier, produk akhir yang didistri­busikan pada retailer. Komponen-komponen tersebut terkait dengan kualitas: sumber daya manusia, sumber daya material, fashion forecasting, dan multimedia industri fashion.

  7. BDE-209 in the Australian Environment: Desktop review

    International Nuclear Information System (INIS)

    English, Karin; Toms, Leisa-Maree L.; Gallen, Christie; Mueller, Jochen F.

    2016-01-01

    The commercial polybrominated diphenyl ether (PBDE) flame retardant mixture c-decaBDE is now being considered for listing on the Stockholm Convention on Persistent Organic Pollutants. The aim of our study was to review the literature regarding the use and detection of BDE-209, a major component of c-decaBDE, in consumer products and provide a best estimate of goods that are likely to contain BDE-209 in Australia. This review is part of a larger study, which will include quantitative testing of items to assess for BDE-209. The findings of this desktop review will be used to determine which items should be prioritized for quantitative testing. We identified that electronics, particularly televisions, computers, small household appliances and power boards, were the items that were most likely to contain BDE-209 in Australia. Further testing of these items should include items of various ages. Several other items were identified as high priority for future testing, including transport vehicles, building materials and textiles in non-domestic settings. The findings from this study will aid in the development of appropriate policies, should listing of c-decaBDE on the Stockholm Convention and Australia’s ratification of that listing proceed.

  8. BDE-209 in the Australian Environment: Desktop review

    Energy Technology Data Exchange (ETDEWEB)

    English, Karin, E-mail: k.english@uq.edu.au [School of Medicine, The University of Queensland, Brisbane (Australia); Children’s Health and Environment Program, Child Health Research Centre, The University of Queensland, Brisbane (Australia); Queensland Children’s Medical Research Institute, Children’s Health Research Centre, Brisbane (Australia); Toms, Leisa-Maree L. [School of Public Health and Social Work, and Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane (Australia); Gallen, Christie; Mueller, Jochen F. [The University of Queensland, National Research Centre for Environmental Toxicology (Entox), Brisbane (Australia)

    2016-12-15

    The commercial polybrominated diphenyl ether (PBDE) flame retardant mixture c-decaBDE is now being considered for listing on the Stockholm Convention on Persistent Organic Pollutants. The aim of our study was to review the literature regarding the use and detection of BDE-209, a major component of c-decaBDE, in consumer products and provide a best estimate of goods that are likely to contain BDE-209 in Australia. This review is part of a larger study, which will include quantitative testing of items to assess for BDE-209. The findings of this desktop review will be used to determine which items should be prioritized for quantitative testing. We identified that electronics, particularly televisions, computers, small household appliances and power boards, were the items that were most likely to contain BDE-209 in Australia. Further testing of these items should include items of various ages. Several other items were identified as high priority for future testing, including transport vehicles, building materials and textiles in non-domestic settings. The findings from this study will aid in the development of appropriate policies, should listing of c-decaBDE on the Stockholm Convention and Australia’s ratification of that listing proceed.

  9. Career Exploration in the Fashion Industry: A Suggested Program Guide. Fashion Industry Series No. 1.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The career exploration guide is the first of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The series is intended to provide an information source for establishing, expanding, or evaluating secondary and adult vocational instructional programs related to the broad field of…

  10. Neoliberal fashion: The return to sewing sweatshops

    Directory of Open Access Journals (Sweden)

    Jerónimo Montero

    2012-01-01

    Full Text Available This paper analyzes the re-emergence of sewing sweatshops both in major and peripheral big cities around the world, in order to understand the changes that took place in the fashion industry over the past four decades and their consequences on the workers. Two case studies were carried out to this aim: one in the city of Buenos Aires and another one in the province of Prato [Italy]. The results of the investigation show that this sector was a pioneer in the Neoliberal industrial re-organization processes. In both case studies, the closing down of factories and the massive use of informal urban workshop subcontracting resulted in significant asset concentration as well as in a marked deterioration of labor conditions. In fact, human trafficking and the slavery of thousands of immigrant workers are vital to this industry's operation

  11. Ropajes: Sewing and Fashion Design Courses

    Directory of Open Access Journals (Sweden)

    Carlos J. Lebrón Cajigas

    2014-11-01

    Full Text Available Vilma Martínez is an entrepreneur from Puerto Rico that started a sewing school that kept growing and expanding into related courses and businesses. Those businesses reach several industries such as education, fashion, and entertainment. Besides having to deal with the management of the marketing, operations, human resources, and other functions, she also had to face problems that are particular to family businesses and to new businesses. Even though the economic environment in PR and the industry environment were very difficult, there were also social and demographic factors that helped her sewing school segment to experience significant growth. The growth of the sewing school was also due to the advertising, pricing, and other marketing activities implemented and that kept evolving over time from constant experimentation. Many strategic issues are presented, including relocation, larger facilities, accreditation, and the hiring of non-family employees.

  12. Fashion garment manufacturing - FGM and cyclability theory

    Science.gov (United States)

    Mendes, F. D.; Dos Santos, M. C. L.

    2017-10-01

    This article, derived from an ongoing research, presents the possibilities of reducing the inappropriate disposal of textile residues generated by the fabric cutting sector of the Fashion Garment Manufacturing (FGM). The raw material used is very varied, resulting in a large number of productive processes. FGM produces clothing that has as its main features a short life cycle, a high rate of diversification and differentiation, and small production batches, resulting in few similar parts. The production process is differentiated according to the characteristics of the fabric and the look of the garment. During the production process, at least 10% of textile waste is generated during the cutting process, which is constantly discarded in an inadequate way. The Cyclability theory is researched aiming at the possibility of reduction in the generation of waste and elimination of inappropriate disposal. The case study presents the action research carried out in three small Brazilian companies to study the applicability of the Cyclability theory.

  13. ROMANIAN FOLKLORE MOTIFS IN FASHION DESIGN

    Directory of Open Access Journals (Sweden)

    MOCENCO Alexandra

    2014-05-01

    Full Text Available The traditional Romanian costume such as the entire popular art (architecture, woodcarvins, pottery etc. was born and lasted in our country since ancient times. Closely related to human existence, the traditional costume reflected over the years as reflected nowadays, the mentality and artistic conception of the people. Today the traditional Romanian costume became an inspiration source to the wholesale fashion production industry designers, both Romanian and international. Although the contemporary designers are working in accordance with a vision, using a wide area of styles, methods and current technology, they usually return to traditional techniques and ethnic folklore motifs, which converts and resize them, integrating them in their contemporary space. Adrian Oianu is a very appreciated Romanian designer who launched two collections inspired by his native’s country traditional costumes: “Suflecata pan’ la brau” (“Turned up ‘til the belt” and “Bucurie” (“Joy”. Dorin Negrau had as inspiration for his “Lost” collection the traditional costume from the Bihor region. Yves Saint Laurent had a collection inspired by the Romanian traditional flax blouses called “La blouse roumaine”. The paper presents the traditional Romanian values throw fashion collections. The research activity will create innovative concepts to support the garment industry in order to develop their own brand and to bring the design activities in Romania at an international level. The research was conducted during the initial stage of a project, financed through national founds, consisting in a documentary study on ethnographic characteristics of the popular costume from different regions of the country.

  14. Nielsen PrimeLocation Web/Desktop: Assessing and GIS Mapping Market Area

    Data.gov (United States)

    Social Security Administration — Nielsen PrimeLocation Web and Desktop Software Licensed for Internal Use only: Pop-Facts Demographics Database, Geographic Mapping Data Layers, Geo-Coding locations.

  15. Life cycle assessment study of a Chinese desktop personal computer

    International Nuclear Information System (INIS)

    Duan Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li Jinhui

    2009-01-01

    Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps - i.e. the end of life phase - lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study

  16. New generation of 3D desktop computer interfaces

    Science.gov (United States)

    Skerjanc, Robert; Pastoor, Siegmund

    1997-05-01

    Today's computer interfaces use 2-D displays showing windows, icons and menus and support mouse interactions for handling programs and data files. The interface metaphor is that of a writing desk with (partly) overlapping sheets of documents placed on its top. Recent advances in the development of 3-D display technology give the opportunity to take the interface concept a radical stage further by breaking the design limits of the desktop metaphor. The major advantage of the envisioned 'application space' is, that it offers an additional, immediately perceptible dimension to clearly and constantly visualize the structure and current state of interrelations between documents, videos, application programs and networked systems. In this context, we describe the development of a visual operating system (VOS). Under VOS, applications appear as objects in 3-D space. Users can (graphically connect selected objects to enable communication between the respective applications. VOS includes a general concept of visual and object oriented programming for tasks ranging from, e.g., low-level programming up to high-level application configuration. In order to enable practical operation in an office or at home for many hours, the system should be very comfortable to use. Since typical 3-D equipment used, e.g., in virtual-reality applications (head-mounted displays, data gloves) is rather cumbersome and straining, we suggest to use off-head displays and contact-free interaction techniques. In this article, we introduce an autostereoscopic 3-D display and connected video based interaction techniques which allow viewpoint-depending imaging (by head tracking) and visually controlled modification of data objects and links (by gaze tracking, e.g., to pick, 3-D objects just by looking at them).

  17. Artrodese cervical anterior em três e quatro níveis com dispositivo intersomático não associado à placa cervical Artrodesis cervical anterior en tres y cuatro niveles con dispositivo intersomático no asociado a placa cervical Anterior cervical arthrodesis for three and four levels using stand-alone interbody cages without cervical plates

    Directory of Open Access Journals (Sweden)

    Marcel Luiz Benato

    2009-06-01

    en tercer y cuarto niveles; dolor axial y/o irradiada; con mínimo seis meses de postoperatorio. El criterio de exclusión fue la presencia de inestabilidad cervical traumática. Fueron evaluadas las tasas de consolidación, la presencia de síntomas, la tasa de complicaciones y la posición de los dispositivos intersomáticos (subsidente después de seis meses. RESULTADOS: todos los pacientes obtuvieron consolidación en tres meses, sin embargo, dos pacientes presentaron el fenómeno de subsidente, o sea, migración con consolidación en cifosis, sin alterar los resultados clínicos y la consolidación de la artrodesis a los seis meses de postoperatorio. Los pacientes presentaron mejoría del dolor preoperatorio y solo tres (15% presentaron dolor residual. No hubo complicaciones mayores. El tiempo de hospitalización fue de dos días. No fue utilizada inmovilización rígida en el postoperatorio. CONCLUSIÓN: fue obtenida consolidación con esta técnica en todos los casos. La técnica se mostró segura y promovió buenos resultados radiológicos y clínicos.evaluate the rates of fusion of the anterior cervical discectomy and arthrodesis for three and four levels using interbody cages (stand-alone without cervical plates six months after post-operative. METHODS: from November 2005 to July 2008, 20 patients were treated as proposed. The inclusion criteria were: cervical degenerative disease of three and four levels; axial and/or irradiated pain at least six months of follow-up. The exclusion criteria were: cervical traumatic instability. The fusion rate, clinical symptoms, rate of complications and the implant position were evaluated six months after post-operative. RESULTS: results were favorable in 100% of the patients, with residual pain in two cases. Fusion was found in 100% of the patients, except for two cases with minimum subsidence and fusion in a slight kyphotic position. There were not significant complications. The discharge of the hospital was performed

  18. Flavoured Wine – Fad, Fashion or Trend?

    Directory of Open Access Journals (Sweden)

    Wilson Damien

    2016-01-01

    With this divergence between publicity and market behaviour being echoing across the globe, wine producers need to be able to determine whether a new category represents an opportunity to consider a strategic change in business direction. Although publicity has been shown to effect a change in wine consumer behaviour, the conditions surrounding a new wine category's growth from fad, trend and fashion are analysed for the purpose of strategic management. This study extends findings from historical narratives through the use of empirical evidence from both European and New World wine markets. The evidence is contrasted with a contemporary phenomenological experience expressed by influencers within both of those markets, as a means to illustrate the disparity between the contemporary appeal of popular publicity, and the challenges faced by wine producers having to respond to the market reality. This study illustrates that implementing strategic decisions on whether to engage in a new trend, depends on the innovative category being consistent with existing strategy and able to impact the market without reliance on external publicity.

  19. THE INTERNATIONALIZATION PROCESS OF AN FASHION SOFTWARE

    Directory of Open Access Journals (Sweden)

    William Ramos

    2011-06-01

    Full Text Available This paper aims to analyze the internationalization process from 1996 to 2010 of a company that develops software for fashion. The theoretical foundations of the article include the theories of internationalization with special attention to the Nordic School of International Business, the approach of the networks, as well as research on specific software firms, born globals and international entrepreneurship. The survey used the technique of case study, qualitative, exploratory and descriptive. Data were collected from primary sources such as semi-structured interviews and questionnaires, and secondary sources. The data from the interviews and documents were repeatedly reviewed, coded and analyzed for their content and meaning, to identify the categories under consideration. Among the factors seen fleeing theoretical approaches, are cited the heels of the steps outlined by them and not exclusive preference for countries with lower psychic distance. It was also relevant to the international orientation of the entrepreneurs, whose social networks encompassed international actors who sometimes influenced the process, confirming the approach of the networks.

  20. Biological Derived Nanomotors in a ``Domino Fashion''

    Science.gov (United States)

    Maksoed, W. H.

    2015-11-01

    For disproportionation of H2 O2 , we also considers an electrokinetic mechanism they appear.So far, the more efficient micro/nanoscale motors are derived from biological systems [2003]. Besides, a control experimenting using 3 stripped Au/Pt/Au rods with catalyzed the composition of H2 O2 , at a similar rate-Walter F Paxton: ``Catalytic Nanomotors,'' JACS, 2004. We also intended to accomaplishes the HCCI quotes from Marcin Frackowiak, dissertation, 2009, just in several characters seems as twin of IGNITION through IceCube document project held since Oct 11, 2001 ever concludes as ``saw none'' so they can be follows the ITER/IFMIF. Refers to S29286 file in UI retrieved: ``magnetic quantum-dot cellular automata which is nonvolatile & lower power consist of nanomagnets. Since they are magnetically coupled, logic can be performed by switching, on the other hand in a DOMINO fashion..'' [A. Klenm: ``Fabrication of Magnetic Tunnel Junction-based Spintronic Devices..,'' convocation, Aug 11-14, 2010]. Acknowledgments devotes to BB Mandelbrot: ``Fractal Geometry: What is it & What Does it do?''.

  1. Tacking bonds: fashion image circulation in social networks

    Directory of Open Access Journals (Sweden)

    Lívia Laura Matté

    2014-12-01

    Full Text Available This study aims at delineating the aspects of fashion in contemporary times under a bias of communication. It is a search to identify, through the images that circulate on social networks, the characteristics that may distinguish the contemporary fashion circumscribed to the so called postmodernity. Therefore, we performed a bibliographic research in order to understand the concepts of post modernity. Among the authors studied, we chose to follow the pathways taken by the French sociologist Michel Maffesoli, since his ideas about post modernity are the key to explain the contemporary fashion in post modernity. The corpus of this study consists of images extracted from a social network of fashion image sharing: Lookbook.nu: Collective Fashion Consciousness. We believe that these images are loaded with information that might explain fashion in post modernity, and contribute to discussions about the creation of bonds enabled by the circulation of these imagery elements.

  2. Gerald McCann: The Rediscovery of a Fashion Designer

    OpenAIRE

    Almond, K; Riches, C

    2018-01-01

    The research for this article was initiated by the discovery of the archive of international fashion designer, Gerald McCann, hidden in a garage in Fleetwood, Lancashire, UK. The contents of the archive revealed a treasure trove of press cuttings photographs, fashion drawings and interviews as well as designs and costings from a once well-known designer, whose significance to the global fashion industry is sparsely documented and largely forgotten. This article reveals the history of the desi...

  3. Specifics of marketing strategy in the segment of high fashion

    OpenAIRE

    Butigan, Ružica; Grilec Kaurić, Alica; Ujević, Darko

    2013-01-01

    The success of high fashion designers is not only in a specificity of the products but also in specific and very well executed marketing strategy. Emphasis is placed on the design of very specific marketing program and marketing strategies that must concider all the characteristics of the high fashion market. Therefore, a scientific research problem is defined as follows: although the market of high fashion at first glance does not imply a completely different marketing approach than other fa...

  4. Differentiating Contemporary Racial Prejudice from Old-Fashioned Racial Prejudice*

    OpenAIRE

    Brown, Tony N.; Akiyama, Mark K.; White, Ismail K.; Jayaratne, Toby Epstein; Anderson, Elizabeth S.

    2009-01-01

    The present study addresses the distinction between contemporary and old-fashioned prejudice using survey data from a national sample (n=600) of self-identified whites living in the United States and interviewed by telephone in 2001. First, we examine associations among indicators of contemporary and old-fashioned prejudice. Consistent with the literature, contemporary and old-fashioned prejudice indicators represent two distinct but correlated common factors. Second, we examine whether belie...

  5. Islamic fashion, media debates and styles of interaction

    DEFF Research Database (Denmark)

    Christiansen, Connie Carøe

    Currently, in Copenhagen streets as in many other European cities an increasing diversity in the style of clothing which appeals to believing and fashion conscious Muslim women can be observed. These styles I loosely term Islamic fashion, i.e. a style of clothing that seeks to appear attractive....... The situation invites the question, what is communicated through Islamic styled clothing? Does Islamic fashion make a difference for the representation of Muslims in a European context?...

  6. Efficiency Sustainability Resource Visual Simulator for Clustered Desktop Virtualization Based on Cloud Infrastructure

    Directory of Open Access Journals (Sweden)

    Jong Hyuk Park

    2014-11-01

    Full Text Available Following IT innovations, manual operations have been automated, improving the overall quality of life. This has been possible because an organic topology has been formed among many diverse smart devices grafted onto real life. To provide services to these smart devices, enterprises or users use the cloud. Cloud services are divided into infrastructure as a service (IaaS, platform as a service (PaaS and software as a service (SaaS. SaaS is operated on PaaS, and PaaS is operated on IaaS. Since IaaS is the foundation of all services, algorithms for the efficient operation of virtualized resources are required. Among these algorithms, desktop resource virtualization is used for high resource availability when existing desktop PCs are unavailable. For this high resource availability, clustering for hierarchical structures is important. In addition, since many clustering algorithms show different percentages of the main resources depending on the desktop PC distribution rates and environments, selecting appropriate algorithms is very important. If diverse attempts are made to find algorithms suitable for the operating environments’ desktop resource virtualization, huge costs are incurred for the related power, time and labor. Therefore, in the present paper, a desktop resource virtualization clustering simulator (DRV-CS, a clustering simulator for selecting clusters of desktop virtualization clusters to be maintained sustainably, is proposed. The DRV-CS provides simulations, so that clustering algorithms can be selected and elements can be properly applied in different desktop PC environments through the DRV-CS.

  7. Sales Forecasting for Fashion Retailing Service Industry: A Review

    Directory of Open Access Journals (Sweden)

    Na Liu

    2013-01-01

    Full Text Available Sales forecasting is crucial for many retail operations. It is especially critical for the fashion retailing service industry in which product demand is very volatile and product’s life cycle is short. This paper conducts a comprehensive literature review and selects a set of papers in the literature on fashion retail sales forecasting. The advantages and the drawbacks of different kinds of analytical methods for fashion retail sales forecasting are examined. The evolution of the respective forecasting methods over the past 15 years is revealed. Issues related to real-world applications of the fashion retail sales forecasting models and important future research directions are discussed.

  8. The right to fashion in the age of terrorism.

    Science.gov (United States)

    Pham, Minh-Ha T

    2011-01-01

    As part of a feminist commitment to collaboration, this article appears as a companion essay to Mimi Thi Nguyen's "The Biopower of Beauty: Humanitarian Imperialisms and Global Feminisms" and offers a point of departure for thinking about fashion and beauty as processes that produce subjects recruited to, and aligned with, the national interests of the United States in the war on terror. The Muslim woman in the veil and her imagined opposite in the fashionably modern - and implicitly Western - woman become convenient metaphors for articulating geopolitical contests of power as a human rights concern, as a rescue mission, as a beautifying mandate. This article examines newer iterations of this opposition, in the wake of September 11, 2001, in order to demonstrate the critical resonance of a biopolitics on fashion and beauty. In "The Right to Fashion in the Age of Terrorism," the author examines the relationship between the U.S. war on terror, targeting persons whose sartorial choices are described as terrorist-looking and oppressive, and the right-to-fashion discourse, which promotes fashion's mass-market diffusion as a civil liberty. Looking at these multiple invocations of the democratization of fashion, this article argues that the right-to-fashion discourse colludes with the war on terror by fabricating a neoliberal consumer-citizen who is also a couture-citizen and whose right to fashion reasserts U.S.exceptionalism, which is secured by private property, social mobility, and individualism.

  9. Differentiating Contemporary Racial Prejudice from Old-Fashioned Racial Prejudice.

    Science.gov (United States)

    Brown, Tony N; Akiyama, Mark K; White, Ismail K; Jayaratne, Toby Epstein; Anderson, Elizabeth S

    2009-06-01

    The present study addresses the distinction between contemporary and old-fashioned prejudice using survey data from a national sample (n=600) of self-identified whites living in the United States and interviewed by telephone in 2001. First, we examine associations among indicators of contemporary and old-fashioned prejudice. Consistent with the literature, contemporary and old-fashioned prejudice indicators represent two distinct but correlated common factors. Second, we examine whether belief in genetic race differences uniformly predicts both types of prejudice. As might be expected, belief in genetic race differences predicts old-fashioned prejudice but contrary to recent theorizing, it also predicts contemporary prejudice.

  10. The Prototype as Mediator of Embodied Experience in Fashion Design

    DEFF Research Database (Denmark)

    Kristensen, Tore; Ræbild, Ulla

    For many people fashion design is associated with shows and aesthetic appearances of a somewhat superficial nature. However, fashion design is much more. This paper sets out from a work in progress which uses theory on embodied knowledge to understand how fashion design processes take place....... It is based on photographic material obtained in design studios during prototype development. The prototype is considered a core fashion design competence. Yet, companies increasingly cut costs by reducing or omitting prototype development. We intend to show, how the garment prototype acts as an important...

  11. Differentiating Contemporary Racial Prejudice from Old-Fashioned Racial Prejudice*

    Science.gov (United States)

    Brown, Tony N.; Akiyama, Mark K.; White, Ismail K.; Jayaratne, Toby Epstein; Anderson, Elizabeth S.

    2009-01-01

    The present study addresses the distinction between contemporary and old-fashioned prejudice using survey data from a national sample (n=600) of self-identified whites living in the United States and interviewed by telephone in 2001. First, we examine associations among indicators of contemporary and old-fashioned prejudice. Consistent with the literature, contemporary and old-fashioned prejudice indicators represent two distinct but correlated common factors. Second, we examine whether belief in genetic race differences uniformly predicts both types of prejudice. As might be expected, belief in genetic race differences predicts old-fashioned prejudice but contrary to recent theorizing, it also predicts contemporary prejudice. PMID:20076765

  12. Desktop NMR for structure elucidation and identification of strychnine adulteration.

    Science.gov (United States)

    Singh, Kawarpal; Blümich, Bernhard

    2017-05-02

    Elucidating the structure of complex molecules is difficult at low magnetic fields due to the overlap of different peak multiplets and second-order coupling effects. This is even more challenging for rigid molecules with small chemical shift differences and with prochiral centers. Since low-field NMR spectroscopy is sometimes presumed as restricted to the analysis of only small and simple molecules, this paper aims at countering this misconception: it demonstrates the use of low-field NMR spectroscopy in chemical forensics for identifying strychnine and its counterions by exploring the chemical shift as a signature in different 1D 1 H and 13 C experiments. Hereby the applied methodologies combine various 1D and 2D experiments such as 1D 1 H, 13 C, DEPT, and 2D COSY, HETCOR, HSQC, HMBC and J-resolved spectroscopy to elucidate the molecular structure and skeleton of strychnine at 1 Tesla. Strychnine is exemplified here, because it is a basic precursor in the chemistry of natural products and is employed as a chemical weapon and as a doping agent in sports including the Olympics. In our study, the molecular structure of the compound could be identified either with a 1D experiment at high magnetic field or with HMBC and HSQC experiments at 1 T. In conclusion, low-field NMR spectroscopy enables the chemical elucidation of the strychnine structure through a simple click with a computer mouse. In situations where a high-field NMR spectrometer is unavailable, compact NMR spectrometers can nevertheless generate knowledge of the structure, important for identifying the different chemical reaction mechanisms associated with the molecule. Desktop NMR is a cost-effective viable option in chemical forensics. It can prove adulteration and identify the origin of different strychnine salts, in particular, the strychnine free base, strychnine hemisulphate and strychnine hydrochloride. The chemical shift signatures report the chemical structure of the molecules due to the impact of

  13. Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms.

    Science.gov (United States)

    Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

    2013-12-21

    Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards.

  14. Mining Fashion Outfit Composition Using An End-to-End Deep Learning Approach on Set Data

    OpenAIRE

    Li, Yuncheng; Cao, LiangLiang; Zhu, Jiang; Luo, Jiebo

    2016-01-01

    Composing fashion outfits involves deep understanding of fashion standards while incorporating creativity for choosing multiple fashion items (e.g., Jewelry, Bag, Pants, Dress). In fashion websites, popular or high-quality fashion outfits are usually designed by fashion experts and followed by large audiences. In this paper, we propose a machine learning system to compose fashion outfits automatically. The core of the proposed automatic composition system is to score fashion outfit candidates...

  15. Pre-Employment Laboratory Education. Clothing/Fashion Design Guidebook.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Instructional Materials Center.

    This guidebook is designed for use in teaching students enrolled in preemployment laboratory education (PELE) clothing/fashion design programs. The first of two major sections includes an overview for teachers on planning, conducting, and evaluating a PELE clothing/fashion design program. Specific topics discussed in section 1 include (1)…

  16. International change and technological evolution in the fashion industry

    NARCIS (Netherlands)

    A. Pratt (Andy); P. Borrione (Paola); M. Lavanga (Mariangela); M. D' Ovidio (Marianna)

    2012-01-01

    textabstractThe aim of this research is to sketch out the parameters of the fashion industry. Whilst, without doubt fashion is a means of personal and cultural expression, it is also an industry. The industrial and economic aspects have been relatively under-researched. We highlight the fact that

  17. Perception of fashion brands by consumers in Serbia

    Directory of Open Access Journals (Sweden)

    Ostojić Ivana

    2012-01-01

    Full Text Available Fashion phenomenon has always attracted attention, but this topic has never been as popular as it is now. Fashion industry permeates all the aspects of human society and it portrays the time we live in the best way. Globalization of fashion and internalisation of doing business in fashion industry have conditioned moving all the important business functions to the countries with noticeably cheaper price of all the resources which has influenced reduction of the cost of fashion products. Textile industry in Serbia, once successful branch of the processing industry, is faced with foreign competition which has succeeded in positioning in the domestic market and attracting wide range of consumers. The research concerning consumers' preferences about fashion brands by determining which factors influence consumers the most while shopping will present the current situation in fashion industry of Serbia. By taking all brand characteristics into account (quality, price, design, commodity, prestige, we can determine the differences in evaluating the factors which apply to choosing garments by examinees regarding their gender, age and market they buy the products on. The case study showing how the consumers from Serbia and abroad see Mona fashion brand will be presented in the research.

  18. Being successful as a Supply Chain Manager in fashion

    NARCIS (Netherlands)

    Rita van der Veen; Stef Weijers; Henny Jordaan; Hans-Heinrich Glöckner

    2011-01-01

    This paper presents the findings of a research project on the competencies which supply chain managers in the fashion industry need to rely on, in order to perform successfully in their job. In this research project 21 supply chain managers in the fashion industry in the Netherlands have been

  19. 20th Century Fashions. Teacher Edition. Marketing Education LAPs.

    Science.gov (United States)

    Hawley, Jana

    This learning activity packet is designed to help students to acquire a competency: how to use an understanding of fashion history in preparation for a career in the fashion industry. The unit consists of the competency, three objectives, suggested learning activity, transparency masters, and a pretest/posttest with answer keys. The activity is a…

  20. Being succesful as a Supply Chain Manager in Fashion

    NARCIS (Netherlands)

    Stef Weijers; Henny Jordaan; Rita van der Veen; Hans-Heinrich Glöckner

    2012-01-01

    This paper presents the findings of a research project on the competencies which supply chain managers in the fashion industry need to rely on, in order to perform successfully in their job. In this research project 21 supply chain managers in the fashion industry in the Netherlands have been

  1. Success According to Professionals in the Fashion Industry

    Science.gov (United States)

    Gerber, Tara; Saiki, Diana

    2010-01-01

    The purpose of this study was to examine career success perceived by professionals in the fashion industry. Two sets of open-ended interviews were conducted with 33 fashion industry professionals. The interviews were analyzed for success themes using a grounded approach methodology. External definitions of success mentioned were salary,…

  2. Textile and fashion production skills for sustainable development in ...

    African Journals Online (AJOL)

    Nigeria is a country with abundant wealth in human, cultural and natural resources. It is one country noted for its people's penchant for textiles, fashion and style. On the basis of Nigeria's rich, vibrant and viable traditional textile and fashion industry vis-à-vis the need to keep Niger Delta youths out of violence, this paper this ...

  3. Textile designs and fashion as strategic resource tools for economic ...

    African Journals Online (AJOL)

    For there to be a more sustainable economic development, textile design and fashion in their formal and esthetic richness are hitherto the cannons to explore. The paper concludes that international channels in particular should be provided for the distribution of textile design and fashion as commodities which will earn the ...

  4. Creating aesthetic, institutional and symbolic boundaries in fashion photo shoots

    NARCIS (Netherlands)

    van der Laan, E.; Kuipers, G.

    2016-01-01

    This study proposes a ‘bottom-up’, micro-sociological analysis of cultural production. Drawing on detailed observations of fashion photo shoots and interviews with fashion professionals in the Netherlands, we analyse how the division between ‘high’ (editorial) and ‘low’ (commercial) culture is

  5. Analisis Perilaku Pembelian Impulsif Produk Fashion Dilihat dari Perbedaan Usia

    OpenAIRE

    Suhaily, Lily; Soelasih, Yasintha

    2014-01-01

    The purpose of this research is to analyse impulsive buying behavior of fashion product based on age differences. 260 questionnaires were distributed to respondents at Plaza Semanggi, Sudirman with random sampling method. The resut shows that no differences between young adults and maturity adults age toward impulsive buying behavior of fashion product.

  6. Textiles and clothing sustainability recycled and upcycled textiles and fashion

    CERN Document Server

    2017-01-01

    This book discusses in detail the concepts of recycling and upcycling and their implications for the textiles and fashion sector. In addition to the theoretical concepts, the book also presents various options for recycling and upcycling in textiles and fashion. Although recycling is a much-developed and widely used concept, upcycling is also gaining popularity in the sector.

  7. The File Sync Algorithm of the ownCloud Desktop Clients

    CERN Document Server

    CERN. Geneva

    2014-01-01

    The ownCloud desktop clients provide file syncing between desktop machines and the ownCloud server, available for the important desktop platforms. This presentation will give an overview of the sync algorithm used by the clients to provide a fast, reliable and robust syncing experience for the users. It will describe the phases a sync run will go through and how it is triggered. It also will provide an insight on the algorithms that decided if a file is uploaded, downloaded or even deleted on either on the local machine or in the cloud. Some examples of non obvious situations in file syncing will be described and discussed. As the ownCloud sync protocol is based on the open standard WebDAV the resulting challenges and the solutions will be illustrated. Finally a couple of frequently proposed enhancements will be reviewed and assed for the future development of the ownCloud server and syncing clients.

  8. Developing a Process Model for the Forensic Extraction of Information from Desktop Search Applications

    Directory of Open Access Journals (Sweden)

    Timothy Pavlic

    2008-03-01

    Full Text Available Desktop search applications can contain cached copies of files that were deleted from the file system. Forensic investigators see this as a potential source of evidence, as documents deleted by suspects may still exist in the cache. Whilst there have been attempts at recovering data collected by desktop search applications, there is no methodology governing the process, nor discussion on the most appropriate means to do so. This article seeks to address this issue by developing a process model that can be applied when developing an information extraction application for desktop search applications, discussing preferred methods and the limitations of each. This work represents a more structured approach than other forms of current research.

  9. Research and implementation of a Web-based remote desktop image monitoring system

    International Nuclear Information System (INIS)

    Ren Weijuan; Li Luofeng; Wang Chunhong

    2010-01-01

    It studied and implemented an ISS (Image Snapshot Server) system based on Web, using Java Web technology. The ISS system consisted of client web browser and server. The server part could be divided into three modules as the screen shots software, web server and Oracle database. Screen shots software intercepted the desktop environment of the remote monitored PC and sent these pictures to a Tomcat web server for displaying on the web at real time. At the same time, these pictures were also saved in an Oracle database. Through the web browser, monitor person can view the real-time and historical desktop pictures of the monitored PC during some period. It is very convenient for any user to monitor the desktop image of remote monitoring PC. (authors)

  10. Fashion TV and the Motivation of His Audience

    Directory of Open Access Journals (Sweden)

    Margarita I. Pavlushina

    2017-09-01

    Full Text Available The beginning of the 21st century is characterized not only by important historical events in the world, but also by the changes in value norms and priorities. Television, being the most mass and accessible means of information, reflects these changes directly or indirectly. One of the significant trends of modern media is the development of an entertainment segment, which is present on television in the form of special formats and a specialized content. It is necessary to create special conditions for the permanent demonstration of their events, symbols and samples for the development of fashion, as the reflection of public and cultural content and as the means of search for a person's identity. Television has such natural features that provide fashion industry a unique platform for the development of a global fashionable space and intercivilizational communication. Fashion-TV complements the television picture of the world, influencing the spread of fashion trends and the development of a certain culture of behavior and lifestyle among TV viewers. Fashion-TV, as the combination of specialized Fashion channels and TV projects dedicated to fashion and human beauty on Russian social, political and entertainment channels, is primarily the carrier of information about modern fashion trends in clothing that influences the change of a person social-cultural image. This article the hypothesis of modern fashion TV has a blurred target audience with pronounced gender characteristics and a developed motivation. The article presents the results of the study conducted on the basis of the Kazan Federal University for two years.

  11. Why fashion models don’t smile: Aesthetic standards and logics in the field of fashion images, 1982-2011

    NARCIS (Netherlands)

    van der Laan, E.C.

    2015-01-01

    In today’s highly visual and globalized Western culture, fashion magazines are central, transnational institutions that shape and disseminate ideas on how we should look, dress and be successful. Within scholarly and popular debates, fashion images are criticized for giving the wrong examples, for

  12. A desktop 3D printer with dual extruders to produce customised electronic circuitry

    OpenAIRE

    Butt, Javaid; Onimowo, Dominic A.; Gohrabian, Mohammed; Sharma, Tinku; Shirvani, Hassan

    2018-01-01

    3D printing has opened new horizons for the manufacturing industry in general and 3D printers have become the tools for technological advancements. There is a huge divide between the pricing of industrial and desktop 3D printers with the former being on the expensive side capable of producing excellent quality products and latter being on the low-cost side with moderate quality results. However, there is a larger room for improvements and enhancements for the desktop systems as compared to th...

  13. Applications and a three-dimensional desktop environment for an immersive virtual reality system

    International Nuclear Information System (INIS)

    Kageyama, Akira; Masada, Youhei

    2013-01-01

    We developed an application launcher called Multiverse for scientific visualizations in a CAVE-type virtual reality (VR) system. Multiverse can be regarded as a type of three-dimensional (3D) desktop environment. In Multiverse, a user in a CAVE room can browse multiple visualization applications with 3D icons and explore movies that float in the air. Touching one of the movies causes ''teleportation'' into the application's VR space. After analyzing the simulation data using the application, the user can jump back into Multiverse's VR desktop environment in the CAVE

  14. The Portraval of Beauty in Woman's Fashion Magazines

    OpenAIRE

    Moeran, Brian

    2009-01-01

    The primary contents of women’s fashion magazines are fashion, beauty and health. This paper sets out to explore the ways in which international fashion magazines such as Elle, Vogue and Marie Claire portray feminine beauty in textual and advertising matter and how their readers react to such portrayals. Beauty is analysed as grooming practice, and make-up as the prime symbol of the self and its many facets in social interaction. The paper looks at the different kinds of ‘fa...

  15. Students' Beliefs about Mobile Devices vs. Desktop Computers in South Korea and the United States

    Science.gov (United States)

    Sung, Eunmo; Mayer, Richard E.

    2012-01-01

    College students in the United States and in South Korea completed a 28-item multidimensional scaling (MDS) questionnaire in which they rated the similarity of 28 pairs of multimedia learning materials on a 10-point scale (e.g., narrated animation on a mobile device Vs. movie clip on a desktop computer) and a 56-item semantic differential…

  16. Preparatory Study for the Design of a Desktop Videoconferencing Platform for Synchronous Language Teaching

    Science.gov (United States)

    Guichon, Nicolas

    2010-01-01

    This case study paves the way for a research and development project aiming to design a desktop videoconferencing platform specifically dedicated to synchronous language teaching. It starts by defining a model of language pedagogy adapted to distance and taking into account the affordances of videoconferencing for language teaching. It then…

  17. Empirical Analysis of Server Consolidation and Desktop Virtualization in Cloud Computing

    Directory of Open Access Journals (Sweden)

    Bao Rong Chang

    2013-01-01

    Full Text Available Physical server transited to virtual server infrastructure (VSI and desktop device to virtual desktop infrastructure (VDI have the crucial problems of server consolidation, virtualization performance, virtual machine density, total cost of ownership (TCO, and return on investments (ROI. Besides, how to appropriately choose hypervisor for the desired server/desktop virtualization is really challenging, because a trade-off between virtualization performance and cost is a hard decision to make in the cloud. This paper introduces five hypervisors to establish the virtual environment and then gives a careful assessment based on C/P ratio that is derived from composite index, consolidation ratio, virtual machine density, TCO, and ROI. As a result, even though ESX server obtains the highest ROI and lowest TCO in server virtualization and Hyper-V R2 gains the best performance of virtual machine management; both of them however cost too much. Instead the best choice is Proxmox Virtual Environment (Proxmox VE because it not only saves the initial investment a lot to own a virtual server/desktop infrastructure, but also obtains the lowest C/P ratio.

  18. A Cross-Case Analysis of Gender Issues in Desktop Virtual Reality Learning Environments

    Science.gov (United States)

    Ausburn, Lynna J.; Martens, Jon; Washington, Andre; Steele, Debra; Washburn, Earlene

    2009-01-01

    This study examined gender-related issues in using new desktop virtual reality (VR) technology as a learning tool in career and technical education (CTE). Using relevant literature, theory, and cross-case analysis of data and findings, the study compared and analyzed the outcomes of two recent studies conducted by a research team at Oklahoma State…

  19. How Simulator Interfaces Affect Transfer of Training: Comparing Wearable and Desktop Systems

    Science.gov (United States)

    2012-06-01

    a keyboard and mouse to control a virtual Soldier. The desktop computers used were Dell XPS systems, with a 2.66 GHz Intel Core 2 Duo CPU, 4 GB of...significantly slower to complete the scenarios than the control condition, with the magnitude of this difference diminishing over time. 15 . SUBJECT... 15 ACRONYMS

  20. Randomized Trial of Desktop Humidifier for Dry Eye Relief in Computer Users.

    Science.gov (United States)

    Wang, Michael T M; Chan, Evon; Ea, Linda; Kam, Clifford; Lu, Yvonne; Misra, Stuti L; Craig, Jennifer P

    2017-11-01

    Dry eye is a frequently reported problem among computer users. Low relative humidity environments are recognized to exacerbate signs and symptoms of dry eye, yet are common in offices of computer operators. Desktop USB-powered humidifiers are available commercially, but their efficacy for dry eye relief has not been established. This study aims to evaluate the potential for a desktop USB-powered humidifier to improve tear-film parameters, ocular surface characteristics, and subjective comfort of computer users. Forty-four computer users were enrolled in a prospective, masked, randomized crossover study. On separate days, participants were randomized to 1 hour of continuous computer use, with and without exposure to a desktop humidifier. Lipid-layer grade, noninvasive tear-film breakup time, and tear meniscus height were measured before and after computer use. Following the 1-hour period, participants reported whether ocular comfort was greater, equal, or lesser than that at baseline. The desktop humidifier effected a relative difference in humidity between the two environments of +5.4 ± 5.0% (P .05). However, a relative increase in the median noninvasive tear-film breakup time of +4.0 seconds was observed in the humidified environment (P computer use.Trial registration no: ACTRN12617000326392.