WorldWideScience

Sample records for stamp recipients enrolled

  1. Impacting Mediators of Change for Physical Activity among Elderly Food Stamp Recipients

    Science.gov (United States)

    Dye, Cheryl J.; Williams, Joel E.; Kemper, Karen A.; McGuire, Francis A.; Aybar-Damali, Begum

    2012-01-01

    A multidisciplinary team developed and pilot-tested a curriculum, delivered by trained lay educators, to increase self-efficacy for physical activity among elderly food stamp recipients. Curriculum development was guided by a comprehensive literature review. Process evaluation was used to revise the curriculum and to assess lay educator training…

  2. Do Food Stamps without Education Improve the Nutrient Intake and Food-Related Behaviors of Recipients? Food Assistance Needs of the South's Vulnerable Populations.

    Science.gov (United States)

    Cason, Katherine L.; Cox, Ruby H.; Burney, Janie L.

    This study examined the effect of food assistance on the dietary patterns of households in South Carolina, Tennessee, and Virginia. Data was collected from 6,969 participants in the Expanded Food and Nutrition Education Program (EFNEP) and 3,552 participants in the Food Stamp Nutrition Education Program (FSNEP). EFNEP and FSNEP teach low-income…

  3. An examination of the factors by gender and race/ethnicity influencing science, mathematics, and engineering undergraduate degree recipients to enroll in graduate study

    Science.gov (United States)

    Lasiewski, Doreen Kovacsofsky

    Lack of growth in the science talent pool raises concerns about the ability of colleges and universities to meet the demands of the nation's labor market for scientists and engineers. Previous research has focused on ways to improve the K--16 learning environment and increase retention rates of undergraduate students in the sciences. This study extends previous work by considering the next stage in the educational pipeline---the transition to graduate study. The purpose of this study is to develop a model of factors related to science, mathematics, and engineering (SME) undergraduate degree recipients' subsequent enrollment in graduate study. This research utilizes 1994 data from the first follow-up of the 1993 Baccalaureate and Beyond Longitudinal Study by the National Center for Educational Statistics (NCES). Four groups of factors were examined---pre-college characteristics, personal characteristics, institutional characteristics, and the college experience. Analyses were conducted on the overall sample and by gender and race/ethnicity. Male and female subjects were equally likely to enroll in graduate school. White and non-White subjects were equally likely to enroll in graduate school. The best factor to predict enrollment in graduate study for all samples was cumulative grade point average. The models suggested, however, two different journeys taken by SME bachelor's degree recipients. Along one path taken by male and White students, factors associated with graduate school enrollment included having well-educated parents, at least a middle class family background, a good mathematics grade point average, being satisfied with the undergraduate curriculum, being less than twenty-three years old, and having participated in community service. Women and minority students, however, traveled a different path, where marriage negatively influenced enrollment in graduate study. In addition, having children and being over the age of twenty-three were negative factors for

  4. Stamping through astronomy

    CERN Document Server

    Dicati, Renato

    2013-01-01

    Stamps and other postal documents are an attractive vehicle for presenting astronomy and its development. Written with expertise and great enthusiasm, this unique book offers a historical and philatelic survey of astronomy and some related topics on space exploration. It contains more than 1300 color reproductions of stamps relating to the history of astronomy, ranging from the earliest observations of the sky to modern research conducted with satellites and space probes. Featured are the astronomers and astrophysicists who contributed to this marvelous story – not only Ptolemy, Copernicus, Kepler, Newton, Herschel, and Einstein but also hundreds of other minor protagonists who played an important role in the development of this, the most ancient yet the most modern of all the sciences. The book also examines in depth the diverse areas which have contributed to the history of astronomy, including the instrumentation, the theories, and the observations. Many stamps illustrate the beauty and the mystery of ce...

  5. Rapid thermal processing by stamping

    Science.gov (United States)

    Stradins, Pauls; Wang, Qi

    2013-03-05

    A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

  6. Flexible Stamp for Nanoimprint Lithography

    DEFF Research Database (Denmark)

    Nielsen, Theodor; Pedersen, Rasmus H.; Hansen, Ole

    2005-01-01

    by membranes. The bending stiffness difference between the imprint areas and the membranes ensures that the deformation of the stamp during the imprint process mainly takes place in the membranes, leaving the imprint structures unaffected. By this design the strong demand to the parallelism between stamp...... and substrate in the imprint situation is decoupled from the pressing tool and the wafer quality. The stamp consist of 1562 imprint areas (1 mm × 1 mm) containing the patterns to be replicated. The imprinted patterns are characterized with respect to the imprint depth and the polymer residual layer thickness...

  7. Fabrication of Nanoimprint stamps for photonic crystals

    International Nuclear Information System (INIS)

    Kouba, J; Kubenz, M; Mai, A; Ropers, G; Eberhardt, W; Loechel, B

    2006-01-01

    We report on fabrication of nanoimprint stamps for fabrication of two dimensional photonic crystals in visible range of spectra. Nanoimprint stamps made of silicon and/or nickel were successfully fabricated using electron beam lithography and advanced dry etching techniques. The quality of the stamps was evaluated using scanning electron microscopy. The fabricated stamps were also evaluated by imprinting them into suitable polymer materials

  8. Implementation of time stamping service

    OpenAIRE

    Tomažin , Vito

    2015-01-01

    This thesis deals with different ways of how to safely time-stamp digital content. The need for time-stamping arises when we would like to create evidence that certain content existed (or that a certain person was present somewhere) in a precisely specified period of time, so that later we can refer to this evidence. Creating temporal order in the digital world can prove to be difficult, since no data, including time, is recorded permanently. The system clock, which measures time with the ...

  9. Food Stamps. Learning Packet No. 2.

    Science.gov (United States)

    American Bar Association, Washington, DC. Clearinghouse for Offender Literacy Programs.

    This package of instructional materials is designed to aid adults in prison to perform the functional skill of applying for food stamps. The materials consist of instructions for teachers, a sample application for food stamps, a student's work sheet and answer sheet, vocabulary flash cards, and resource materials on food stamps. (MKM)

  10. 7 CFR 916.115 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 916.115 Section 916.115 Agriculture... and Regulations § 916.115 Lot stamping. Except when loaded directly into railway cars, exempted under... Inspection Service lot stamp number, assigned by such Service, showing that such fruit has been USDA...

  11. 7 CFR 917.150 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 917.150 Section 917.150 Agriculture... CALIFORNIA Rules and Regulations Regulation of Daily Shipments § 917.150 Lot stamping. Except when loaded..., prior to shipment, with a Federal-State Inspection Service lot stamp number, assigned by such Service...

  12. Stamp Verification for Automated Document Authentication

    DEFF Research Database (Denmark)

    Micenková, Barbora; van Beusekom, Joost; Shafait, Faisal

    Stamps, along with signatures, can be considered as the most widely used extrinsic security feature in paper documents. In contrast to signatures, however, for stamps little work has been done to automatically verify their authenticity. In this paper, an approach for verification of color stamps ...

  13. Stamping the Earth from space

    CERN Document Server

    Dicati, Renato

    2017-01-01

    This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

  14. The STAMP Software for State Space Models

    Directory of Open Access Journals (Sweden)

    Roy Mendelssohn

    2011-05-01

    Full Text Available This paper reviews the use of STAMP (Structural Time Series Analyser, Modeler and Predictor for modeling time series data using state-space methods with unobserved components. STAMP is a commercial, GUI-based program that runs on Windows, Linux and Macintosh computers as part of the larger OxMetrics System. STAMP can estimate a wide-variety of both univariate and multivariate state-space models, provides a wide array of diagnostics, and has a batch mode capability. The use of STAMP is illustrated for the Nile river data which is analyzed throughout this issue, as well as by modeling a variety of oceanographic and climate related data sets. The analyses of the oceanographic and climate data illustrate the breadth of models available in STAMP, and that state-space methods produce results that provide new insights into important scientific problems.

  15. Time Stamps for Fixed-Point Approximation

    DEFF Research Database (Denmark)

    Damian, Daniela

    2001-01-01

    Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed-point approximat......Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed...

  16. Stamping SERS for creatinine sensing

    Science.gov (United States)

    Li, Ming; Du, Yong; Zhao, Fusheng; Zeng, Jianbo; Santos, Greggy M.; Mohan, Chandra; Shih, Wei-Chuan

    2015-03-01

    Urine can be obtained easily, readily and non-invasively. The analysis of urine can provide metabolic information of the body and the condition of renal function. Creatinine is one of the major components of human urine associated with muscle metabolism. Since the content of creatinine excreted into urine is relatively constant, it is used as an internal standard to normalize water variations. Moreover, the detection of creatinine concentration in urine is important for the renal clearance test, which can monitor the filtration function of kidney and health status. In more details, kidney failure can be imminent when the creatinine concentration in urine is high. A simple device and protocol for creatinine sensing in urine samples can be valuable for point-of-care applications. We reported quantitative analysis of creatinine in urine samples by using stamping surface enhanced Raman scattering (S-SERS) technique with nanoporous gold disk (NPGD) based SERS substrate. S-SERS technique enables label-free and multiplexed molecular sensing under dry condition, while NPGD provides a robust, controllable, and high-sensitivity SERS substrate. The performance of S-SERS with NGPDs is evaluated by the detection and quantification of pure creatinine and creatinine in artificial urine within physiologically relevant concentration ranges.

  17. Evolutions of Advanced Stamping CAE — Technology Adventures and Business Impact on Automotive Dies and Stamping

    Science.gov (United States)

    Wang, Chuantao (C. T.)

    2005-08-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness), (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines), (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping.

  18. Evolutions of Advanced Stamping CAE -- Technology Adventures and Business Impact on Automotive Dies and Stamping

    International Nuclear Information System (INIS)

    Wang Chuantao

    2005-01-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness) (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines) (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping

  19. Stamp Detection in Color Document Images

    DEFF Research Database (Denmark)

    Micenkova, Barbora; van Beusekom, Joost

    2011-01-01

    , moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

  20. METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

    Directory of Open Access Journals (Sweden)

    CARAUS MADALINA

    2015-12-01

    Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

  1. Stamping Die Making. 439-318/320.

    Science.gov (United States)

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  2. Fast thermal nanoimprint lithography by a stamp with integrated heater

    DEFF Research Database (Denmark)

    Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

    2008-01-01

    We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

  3. Ex-Post : The Investment Performance of Collectible Stamps

    NARCIS (Netherlands)

    Dimson, E.; Spaenjers, C.

    2009-01-01

    This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

  4. Hot stamping advanced manufacturing technology of lightweight car body

    CERN Document Server

    Hu, Ping; He, Bin

    2017-01-01

    This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers...

  5. Hot stamping of AA7075 aluminum sheets

    Science.gov (United States)

    Mendiguren, J.; Saenz de Argandona, E.; Galdos, L.

    2016-11-01

    In this work the formability of a high strength aluminium alloy (AA7075-T6) for the stamping of an automotive component has been studied. Due to the low formability of the selected alloy, two different heat assisted forming strategies have been analysed. On the one hand, the W-temper process, where the thermal process is carried out prior to the forming operation. On the other hand, the hot stamping process, where the thermal process is carried out at the same time as the forming. The results showed that both technology were able to form the component avoiding any failure of the material. On the contrary, both processes reduced the final mechanical properties of the material compared to the as received material condition. However, the obtained mechanical properties doubled the strength of commonly used 5xxx and 6xxx aluminium alloys.

  6. DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

    Directory of Open Access Journals (Sweden)

    Rudi Kurniawan Arief

    2017-12-01

    Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

  7. How Do Stamp Duties Affect the Housing Market?

    OpenAIRE

    Davidoff, Ian; Leigh, Andrew

    2013-01-01

    Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

  8. Stamp duties in Indian states - a case for reform

    OpenAIRE

    Alm, James; Annez, Patricia; Modi, Arbind

    2004-01-01

    The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

  9. Design and Development of a Soap Stamping and Tableting ...

    African Journals Online (AJOL)

    A soap stamping and tableting machine comprising a printing die/pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205 soap tablets per hour with an ...

  10. Incidence of PTLD in pediatric renal transplant recipients receiving basiliximab, calcineurin inhibitor, sirolimus and steroids

    NARCIS (Netherlands)

    McDonald, R. A.; Smith, J. M.; Ho, M.; Lindblad, R.; Ikle, D.; Grimm, P.; Wyatt, R.; Arar, M.; Liereman, D.; Bridges, N.; Harmon, W.

    Pediatric renal transplant recipients were enrolled in a multicenter, randomized, double-blind trial of steroid withdrawal. Subjects received basiliximab, calcineurin inhibitor, sirolimus and steroids. Of 274 subjects enrolled, 19 (6.9%) subjects developed posttransplant lymphoproliferative disorder

  11. Optimism in Enrollment Management

    Science.gov (United States)

    Buster-Williams, Kimberley

    2016-01-01

    Enrollment managers, like most managers, have goals that must be focused on with precision, excitement, and vigor. Enrollment managers must excel at enrollment planning. Typically, enrollment planning unites undergraduate and graduate recruitment plans, out-of-state recruitment plans, marketing plans, retention plans, international enrollment…

  12. Facile stamp patterning method for superhydrophilic/superhydrophobic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Sungnam, E-mail: blueden@postech.ac.kr; Hwang, Woonbong, E-mail: whwang@postech.ac.kr [Department of Mechanical Engineering, POSTECH, Pohang 680-749 (Korea, Republic of)

    2015-11-16

    Patterning techniques are essential to many research fields such as chemistry, biology, medicine, and micro-electromechanical systems. In this letter, we report a simple, fast, and low-cost superhydrophobic patterning method using a superhydrophilic template. The technique is based on the contact stamping of the surface during hydrophobic dip coating. Surface characteristics were measured using scanning electron microscopy and energy-dispersive X-ray spectroscopic analysis. The results showed that the hydrophilic template, which was contacted with the stamp, was not affected by the hydrophobic solution. The resolution study was conducted using a stripe shaped stamp. The patterned line was linearly proportional to the width of the stamp line with a constant narrowing effect. A surface with regions of four different types of wetting was fabricated to demonstrate the patterning performance.

  13. A cracked beam or plate transversely loaded by a stamp

    Science.gov (United States)

    Nied, H. F.; Erdogan, F.

    1979-01-01

    In this paper the problem of an infinite elastic beam or a plate containing a crack is considered. The medium is loaded transversely through a stamp which may be rigid or elastic. The problem is a coupled crack-contact problem which cannot be solved by treating the crack and contact problems separately and by using a superposition technique. First the Green's functions for the general case are obtained. Then the integral equations for a cracked infinite strip loaded by a frictionless stamp are obtained. With the question of fracture in mind, the primary interest in the paper has been in calculating the stress intensity factors. The results are given for a rigid flat stamp with sharp edges and for an elastic curved stamp. The effect of friction at the supports on the stress intensity factors is also studied and a numerical example is given.

  14. design and development of a soap stamping and tableting machine

    African Journals Online (AJOL)

    2012-07-02

    pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205.

  15. Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

    OpenAIRE

    Wood, Gavin A.

    1994-01-01

    The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

  16. "Stamp-off" to micropattern sparse, multicomponent features.

    Science.gov (United States)

    Desai, Ravi A; Rodriguez, Natalia M; Chen, Christopher S

    2014-01-01

    Spatially patterned subtractive de-inking, a process we term "stamp-off," provides a simple method to generate sparse, multicomponent protein micropatterns. It has been applied to control cell adhesion, study adhesion biology, as well as to micropattern fragile surfaces. This technique can also readily be applied to study nanoscale interactions between cell membrane receptors and surface-immobilized ligands. It is based on conventional microcontact printing and as such requires the same reagents, including photolithographically defined masters, a spin-coater, poly(dimethyl siloxane) (PDMS), and conventional cell culture reagents such as glass coverslips and adhesive proteins. Stamp-off is conceptually simplified into three steps: (1) generation of an appropriate cell culture substrate, PDMS-coated glass, (2) micropatterning with stamp-off, and (3) cell deposition. After elaborating each of these three methods, we discuss limitations of the technique and its applications. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Optimum utilization of low ash carbonaceous constituents in stamp charging

    Energy Technology Data Exchange (ETDEWEB)

    Dash, P.S.; Krishnan, S.H.; Sharma, R. [Tata Steel, Jamshedpur (India)

    2004-07-01

    To produce high strength coke at reasonable cost, Tata Steel went for stamp charging along with 40-45% imported coal. It is imperative to design the base stamp charge coal blend so as to possess enough fluidity to assimilate these infusible inerts and still produce coke with high coke strength after reaction (CSR). This paper describes the scope of utilising low ash carbonaceous inerts like fluid coke (a petroleum coke made in a fluidized bed) and anthracite optimally in the stamp charging blend by replacing the present imported semi-soft coal with high fluidity imported coals. The laboratory scale experimentation and its results regarding improvement in coke properties and yield are also described. 5 refs., 2 figs., 3 tabs.

  18. Time Stamp Synchronization of PEFP Distributed Control Systems

    International Nuclear Information System (INIS)

    Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

    2010-01-01

    Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

  19. The Enrollment Funnel

    Science.gov (United States)

    Perna, Mark C.

    2005-01-01

    A smart marketing plan creates emotional attachment and loyalty in a school's prospective students, but how does a school go about creating this type of positive environment?. In this brief paper, the author describes a step-by-step approach that he created--the enrollment funnel. The enrollment funnel is a systematic method of moving…

  20. EVE and School - Enrolments

    CERN Multimedia

    EVE et École

    2017-01-01

    IMPORTANT DATES Enrolments 2017-2018 Enrolments for the school year 2017-2018 to the Nursery, the Kindergarten and the School will take place on 6, 7 and 8 March 2017 from 10 am to 1 pm at EVE and School. Registration forms will be available from Thursday 2nd March. More information on the website: http://nurseryschool.web.cern.ch/.

  1. Rabies in Transplant Recipients

    Centers for Disease Control (CDC) Podcasts

    2016-09-19

    Dr. Richard Franka, a CDC scientist, discusses rabies in organ transplant recipients.  Created: 9/19/2016 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 9/19/2016.

  2. Marketplace Enrollment Maps

    Data.gov (United States)

    U.S. Department of Health & Human Services — The maps show the distribution of consumers in a state who enrolled in marketplace plans through federally facilitated, partnership, and supported state-based...

  3. Medicare Enrollment Dashboard

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS Office of Enterprise Data and Analytics has developed a new interactive Medicare Enrollment Dashboard, which provides current information on the number of...

  4. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; Wazny, Scott; Kaunitz, Leon; Waldron, Douglas J.

    2006-02-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir welded aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  5. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; wazny, scott; Kaunitz, Leon; Waldron, D.

    2005-04-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arrise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir woined, aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  6. Modelling the deformation process of flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard

    The present thesis is devoted to numerical modelling of the deformation process of flexible stamps for nanoimprint lithography (NIL). The purpose of those models is to be able to predict the deformation and stretch of the flexixble stamps in order to take that into account when designing the plan...... 2D silicon master used in the NIL process. Two different manufacturing processes are investigated; (i) Embossing of an electroplated nickel foil into a hydrogen silsesquioxane (HSQ) polymer resist on a double-curved surface, (ii) NIL of a flexible polytetrafluoroethylene (PTFE) stamps...... into a polymethyl methacrylate (PMMA) resist. Challenges comprise several non-linear phenomena. First of all geometrical non-linearities arising from the inherent large strains and deformations during the process are modelled. Then, the constitutive behaviors of the nickel foil and the PTFE polymer during...... deformation are addressed. This is achieved by a general elasto-plastic description for the nickel foil and a viscoelastic-viscoplastic model for the PTFE material, in which the material parameters are found. Last, the contact conditions between the deforming stamp and the injection moulding tool insert...

  7. 46 CFR 53.10-10 - Certification by stamping.

    Science.gov (United States)

    2010-10-01

    ... boilers shall be as indicated in HG-530 of section IV of the ASME Boiler and Pressure Vessel Code... 46 Shipping 2 2010-10-01 2010-10-01 false Certification by stamping. 53.10-10 Section 53.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Tests...

  8. 41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

  9. 26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Unauthorized use or sale of stamps. 301.7209-1... § 301.7209-1 Unauthorized use or sale of stamps. (a) Any person who buys, sells, offers for sale, uses... regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

  10. Enrollment Logics and Discourses: Toward Developing an Enrollment Knowledge Framework

    Science.gov (United States)

    Snowden, Monique L.

    2013-01-01

    This article brings attention to a typology of enrollment knowledge possessed and enacted by contemporary chief enrollment officers. Interview narratives are used to reveal enrollment principles and associated actions--enrollment logics--that form enrollment discourses, which in turn shape the institutionalized presence of strategic enrollment…

  11. Anticipatory Enrollment Management: Another Level of Enrollment Management

    Science.gov (United States)

    Dennis, Marguerite J.

    2012-01-01

    Building on the principles of Enrollment Management (EM) and Strategic Enrollment Management (SEM), Anticipatory Enrollment Management (AEM) offers another level of managing enrollment: anticipating future enrollment. AEM is grounded in the basic principles of Customer Relationship Management (CRM) and includes strategic out-reach to parents and…

  12. Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

    International Nuclear Information System (INIS)

    Meng Fantao; Chu Jinkui; Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak; Maximov, Ivan; Montelius, Lars; Xu, H Q; Nilsson, Lars

    2011-01-01

    Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

  13. Astronomy Degree Recipients Initial Employment: Results from the Follow-Up Survey of Degree Recipients, Classes of 2010, 2011 and 2012 Combined. Focus On

    Science.gov (United States)

    Pold, Jack; Mulvey, Patrick

    2015-01-01

    Each fall the Statistical Research Center (SRC) conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the US to provide information concerning the numbers of students they have enrolled and counts of recent degree recipients. In connection with this survey, SRC asks for the names and…

  14. Astronomy Degree Recipients: Initial Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2007, 2008 and 2009. Focus On

    Science.gov (United States)

    Mulvey, Patrick; Shindel, Brandon

    2011-01-01

    Each fall the Statistical Research Center conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the US to provide information concerning the numbers of students they have enrolled and counts of recent degree recipients. In connection with this survey, the authors ask for the names and…

  15. Soil Temperature and Moisture Profile (STAMP) System Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

  16. Reactive wet stamping for patterning of polyelectrolyte multilayers.

    Science.gov (United States)

    Cho, Chungyeon; Valverde, Lauralee; Ozin, Geoffrey A; Zacharia, Nicole S

    2010-08-17

    Patterning of soft films, especially their bulk and not only their surface properties, presents a challenge. Several lithographic techniques do exist, but many of them are complex or limited in their ability to change properties. A few methods of patterning polyelectrolyte multilayers (PEM) have been reported, including microcontact printing and selectively growing layers on patterned self-assembled monolayers, but these all come with certain limitations. We present here the use of a modified microcontact printing method, reactive wet stamping (r-WETs), using a hydrogel stamp soaked in aqueous solutions to create patterns in PEMs. With this technique we are able to locally cause swelling and porosity changes in the PEM films and use our method to qualitatively study the evolution of the porous film morphology. This technique has the potential to locally control chemical functionality, film thickness, and mechanical properties, leading to a new ability to control film architectures both at the film surface and within the bulk of the film.

  17. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    OpenAIRE

    Pasquale Russo Spena

    2017-01-01

    This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

  18. Monitoring enzymatic degradation of pericellular matrices through SERS stamping

    Science.gov (United States)

    Yan, Bo; Hong, Yan; Chen, Tianhong; Reinhard, Björn M.

    2012-06-01

    We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix.We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix. Electronic supplementary information

  19. ANALYSIS OF FOOD STAMP PROGRAM PARTICIPATION AND FOOD EXPENDITURES

    OpenAIRE

    Smallwood, David M.; Blaylock, James R.

    1985-01-01

    A two equation model is developed to examine jointly the determinants of household food stamp program participation and program effects on food expenditures. The model is unique in that it postulates that the participation decision is based on a cost-benefit ratio, selected socioeconomic characteristics, and the potential for increasing both food and nonfood expenditures. Data from the 1977-78 USDA Nationwide Food Consumption Survey Supplemental Low Income Sample is used to estimate the model...

  20. Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

    Science.gov (United States)

    Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

    2015-05-29

    Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

  1. Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

    International Nuclear Information System (INIS)

    Li, Xiaodong; Chang, Ying; Wang, Cunyu; Hu, Ping; Dong, Han

    2017-01-01

    The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M s temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

  2. Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

    Science.gov (United States)

    Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

    2018-01-01

    The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

  3. Time series analysis of tool wear in sheet metal stamping using acoustic emission

    Science.gov (United States)

    Vignesh Shanbhag, V.; Pereira, P. Michael; Rolfe, F. Bernard; Arunachalam, N.

    2017-09-01

    Galling is an adhesive wear mode that often affects the lifespan of stamping tools. Since stamping tools represent significant economic cost, even a slight improvement in maintenance cost is of high importance for the stamping industry. In other manufacturing industries, online tool condition monitoring has been used to prevent tool wear-related failure. However, monitoring the acoustic emission signal from a stamping process is a non-trivial task since the acoustic emission signal is non-stationary and non-transient. There have been numerous studies examining acoustic emissions in sheet metal stamping. However, very few have focused in detail on how the signals change as wear on the tool surface progresses prior to failure. In this study, time domain analysis was applied to the acoustic emission signals to extract features related to tool wear. To understand the wear progression, accelerated stamping tests were performed using a semi-industrial stamping setup which can perform clamping, piercing, stamping in a single cycle. The time domain features related to stamping were computed for the acoustic emissions signal of each part. The sidewalls of the stamped parts were scanned using an optical profilometer to obtain profiles of the worn part, and they were qualitatively correlated to that of the acoustic emissions signal. Based on the wear behaviour, the wear data can be divided into three stages: - In the first stage, no wear is observed, in the second stage, adhesive wear is likely to occur, and in the third stage severe abrasive plus adhesive wear is likely to occur. Scanning electron microscopy showed the formation of lumps on the stamping tool, which represents galling behavior. Correlation between the time domain features of the acoustic emissions signal and the wear progression identified in this study lays the basis for tool diagnostics in stamping industry.

  4. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    OpenAIRE

    Nosova Ekaterina; Erisov Yaroslav; Grechnikov Fedor

    2017-01-01

    Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strai...

  5. 49 CFR 238.119 - Rim-stamped straight-plate wheels.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rim-stamped straight-plate wheels. 238.119 Section... Requirements § 238.119 Rim-stamped straight-plate wheels. (a)(1) Except as provided in paragraph (a)(2) of this... than a private car, that is equipped with a rim-stamped straight-plate wheel if a brake shoe acts on...

  6. Nuclear engineering enrollments and degrees, 1979-1980

    International Nuclear Information System (INIS)

    Gove, R.M.; Little, J.R.; Shirley, D.L.

    1981-08-01

    The 1980 survey includes current data on 69 institutions that reported degrees and/or enrollments. Three schools reported no students during this survey year, and three institutions have discontinued their nuclear engineering program. Since 1978, nuclear engineering enrollments have decreased by about 20% at the undergraduate and master's levels. Doctoral candidates have increased slightly in the two years since 1978. Bachelor's degree recipients have decreased since 1978 by 121 to 656 in 1980, after having increased for three years. Master's degrees awarded decreased also by 121 to 366, and the number of doctoral degrees has increased slightly since 1978 to 116

  7. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    OpenAIRE

    Ji Kang; Liu Xiaochuan; El Fakir Omer; Liu Jun; Zhang Qunli; Wang Liliang

    2016-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values betwe...

  8. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    OpenAIRE

    Liu Xiaochuan; Ji Kang; Fakir Omer El; Liu Jun; Zhang Qunli; Wang Liliang

    2015-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a h...

  9. Minerals on postage stamps: A mix of art, history, economics and geography

    Science.gov (United States)

    Glover, Paul

    2010-05-01

    Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

  10. Simulation Study on Hot Stamping Forming of the Drive Axle Housing of Heavy Truck

    Science.gov (United States)

    Dai, Yongqian; Ji, Jianyi; Luo, Lingjiang

    2018-01-01

    Aiming at the national energy-saving and emission reduction requirements, lightweight of the heavy truck is imminent. Several parameters related to hot stamping forming process of heavy truck drive axle housing are studied in this paper. The results show that the existing two-step stamping with air cooling molding process, can be improved into one-step hot stamping process. The initial temperature of the blank, stamping speed and other parameters related to the forming process were optimized. The results provides useful reference for improving the existing forming process of the drive axle housing, and it is also helpful for realizing the lightweight design of drive axle housing.

  11. Beauty, brains or health: trends in ovum recipient preferences.

    Science.gov (United States)

    Flores, Homero; Lee, Joseph; Rodriguez-Purata, Jorge; Witkin, Georgia; Sandler, Benjamin; Copperman, Alan B

    2014-10-01

    What do ovum donation (OD) recipients request most from their ideal donor: beauty, brains, health or physical self-resemblance? Previous data have shown recipients primarily requested "similar appearance or gene pool." We consider the possibility that these criteria may have changed due to a positive social shift towards OD participation and have evaluated recipients' requests for donor criteria over a span of 5 years. Donor trait preferences of OD recipients (n=438) enrolled in a private, academic OD program from 2008-2012 were assessed in this retrospective cohort analysis. Requests were categorized by appearance, ethnicity, intellect, ability, and mental health. Statistical analyses were conducted by Cochran-Armitage trend tests with significance at pappears that the current recipient is more likely to request a donor with practical traits that would serve their offspring overall quality of life rather than self-reflective traits such as physical resemblance or their genetic composition. We believe that improved awareness and acceptance of OD as a treatment of infertility will continue to inform practical considerations and approaches toward donor recruitment and the donor-recipient matching process.

  12. An interactive and flexible approach to stamping design and optimization

    International Nuclear Information System (INIS)

    Roy, Subir; Kunju, Ravi; Kirby, David

    2004-01-01

    This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

  13. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    Directory of Open Access Journals (Sweden)

    Pasquale Russo Spena

    2017-10-01

    Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

  14. Core-satellite supraparticles to ballistically stamp nanostructures on surfaces.

    Science.gov (United States)

    Oppmann, Maximilian; Miller, Franziska; Thürauf, Sandra; Groppe, Philipp; Prieschl, Johannes; Stauch, Claudia; Mandel, Karl

    2018-03-27

    Nanostructured surfaces are of great importance in a very wide range of fields. They can be obtained by imprint or deposition techniques. However, these are usually sophisticated to perform. Generally, it is not easy to equip an object/product with a nanostructure post manufacturing. Yet, it would be very beneficial to achieve a modification of an arbitrary surface with a nanostructure of choice at a later stage by an approach that is simple to perform without the need of sophisticated equipment or excessive treatment by physico-chemical methods. Herein, such a process is reported which combines two "old-fashioned" techniques, namely sandblasting and rubber-stamping, and translates them to the "nano-world". By creating core-satellite supraparticles via spray-drying, a ballistic core-satellite stamp particle system is obtained which can be used to easily transfer a wide range of nanoparticles to a great variety of surfaces to equip these with a nanostructure and subsequently advanced properties. These include water-repellant, anti-fouling or anti-dust surfaces. Moreover, it is also demonstrated that the approach can be used to manufacture well-defined nano-imprinted surfaces. Such surfaces showed an improved spreading behavior for aliphatic alcohols, thus rendering such surfaces for instance very susceptible for disinfectants. All in all, the simple technique described herein has a great potential for creating nanostructured surfaces on nearly any surface.

  15. Stamping, Clapping and Chanting: An Ancient Learning Pathway?

    Directory of Open Access Journals (Sweden)

    Marion M. Long

    2006-04-01

    Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

  16. Size Effect Studies on Tensile Tests for Hot Stamping Steel

    Science.gov (United States)

    Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

    2018-02-01

    Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

  17. Two Important Stamp Motifs in Roman Britain and Thereafter

    Directory of Open Access Journals (Sweden)

    Diana C. Briscoe

    2016-03-01

    Full Text Available Stamped pottery has had a long and varied history in Britain. There have been periods when it flourished and periods when it almost totally disappeared. This article considers two variations of the rosette motif (A 5 and their fortunes from the late Iron Age to the Early Saxon period. Having been of little importance in the Iron Age and early Roman periods, they became some of the most widely used and distributed motifs in the fourth century. By the fifth century, they were still important, but formed a much smaller proportion of the total motifs than in the fourth century. In the vast majority of cases, there is no correlation between the find spots of fourth and fifth century examples. However, I have identified nine locations where one or other of the two motifs have been found on a late Roman site, which lies within a mile of another site with the same motif, but from the post-Roman period. In these rare conjunctions, I believe that ongoing usage of the motif can be demonstrated from Roman to post-Roman times. It is also clear that pot stamp evidence can be vital in identifying these highly unusual locations and pointing other researchers to sites worthy of special attention.

  18. Acute Hepatic Allograft Rejection in Pediatric Recipients: Effective Factors.

    Science.gov (United States)

    Dehghani, S M; Shahramian, I; Afshari, M; Bahmanyar, M; Ataollahi, M; Sargazi, A

    2018-01-01

    Acute cellular rejection (ACR), a reversible process, can affect the graft survival. To evaluate the relation between ACR and clinical factors in recipients of allograft liver transplantation. 47 recipients of liver were consecutively enrolled in a retrospective study. Their information were retrieved from their medical records and analyzed. Of the 47 recipients, 38 (81%) experienced acute rejection during 24 months of the transplantation. None of the studied factors for occurring transplant rejection, i.e ., blood groups, sex, age, familial history of disease, receiving drugs and blood products, type of donor, Child score, and Child class, was not found to be significant. During a limited follow-up period, we did not find any association between ACR and suspected risk factors.

  19. Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

    CERN Multimedia

    Patrice Loiez

    2004-01-01

    'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

  20. Recipient government control under pressure

    DEFF Research Database (Denmark)

    Jansson, Johanna

    This paper seeks to contribute to ongoing debates around African countries‟ relations to their external partners. It explores the notion of recipient government control, here defined as the extent to which a recipient government is able to ensure that the outcome of negotiations with its external...

  1. Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

    Science.gov (United States)

    National Women's History Project, Windsor, CA.

    This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

  2. Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

    Science.gov (United States)

    Gundersen, Craig; Kreider, Brent

    2008-01-01

    Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

  3. 27 CFR 70.332 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

  4. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Ji Kang

    2016-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

  5. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Liu Xiaochuan

    2015-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

  6. Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

    Science.gov (United States)

    Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

    2016-10-01

    Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

  7. Automatic machine for the stamp charging of cakes of coal for coking. Machine automatique pour le pilonnage des pains de charbon a cokefier

    Energy Technology Data Exchange (ETDEWEB)

    Baro, R.; Crauser, L.; Mely, A.

    1988-06-29

    This machine, which consists of several basic stamp chargers that are interlinked and each of which has several stamps, has a total length that is one run less than the length of the stamp charging box, all the stamps being a constant distance apart which is at most equal to the said run so that the alternating movement of the machine along the rung ensures that the coal is stamp charged along the whole length of the stamp charging box, the stamps being, in addition, braked and stopped when necessary by an idler roller device that acts automatically in the stamp's ascending direction.

  8. Titanium nitride stamps replicating nanoporous anodic alumina films

    International Nuclear Information System (INIS)

    Navas, D; Sanchez, O; Asenjo, A; Jaafar, M; Baldonedo, J L; Vazquez, M; Hernandez-Velez, M

    2007-01-01

    Fabrication of nanostructured TiN films by magnetron sputtering using nanoporous anodic alumina films (NAAF) as substrates is reported. These hard nanostructured films could be used for pre-patterning aluminium foils and to obtain nanoporous films replicating the starting NAAF over a wide range of pore diameters and spacings. Pre-patterned Al foils are obtained by compression with pressures lower than those previously reported, then a new NAAF can be fabricated by means of only one anodization process. As an example, one of the TiN stamps was used for pre-patterning an Al foil at a pressure of 200 kg cm -2 and then it was anodized in oxalic acid solution obtaining the corresponding replica of the starting NAAF

  9. A novel time stamping technique for distributed data acquisition systems

    Science.gov (United States)

    Subramaniam, E. T.

    2012-12-01

    In this paper, we discuss the design and implementation of a synchronizing technique for data acquisition systems, which can effectively use the normal, standard local area network cables to provide a time stamp, with a range up to 32 days, resolution of 10 ns, and synchronization within ± 5 ns. This system may be used to synchronize data being collected by independent heterogeneous data acquisition modules, that acquire events independently. Such distributed systems are generally designed with a tree-like structure or independent self-triggered acquisition boxes. These leaf edges are connected through branches to the root node, via non-bus based inter-connecting links. The present system has been tested with a set of self-triggered digital signal processing based data acquisition engines, having a 100 MHz analog to digital converter front end.

  10. Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

    Science.gov (United States)

    Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

    2017-12-01

    LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

  11. A unique patterned diamond stamp for a periodically hierarchical nanoarray structure

    Science.gov (United States)

    Wang, Yi; Shen, Yanting; Xu, Weiqing; Xu, Shuping; Li, Hongdong

    2016-10-01

    A diamond stamp with a hierarchical pattern was designed for the direct preparation of a periodic nanoarray structure, which was prepared by the reactive ion etching technique with a hierarchical ultrathin alumina membrane (HUTAM) as a mask. The optimal etching conditions for fabricating the diamond stamp were discussed in order to realize a vertical nanopore structure, avoiding structural damage from lateral etching. By using this diamond stamp, a polymer film with the desired hierarchical nanorod array structure can be obtained easily via the simple stamping process, which greatly simplifies the processing procedure. More importantly, the stamp is reusable because of its super-hardness, which ensures the reproducibility of the nanorod array pattern. Another merit is that the smooth surface of the etched diamond can avoid the use of a release agent. Our results prove that this hard stamp can be used for quick preparation of an elaborate periodic nanoarray structure. This study is significant in that it solves the problems of high cost and easy damage of stamps in nanoimprint lithography, and it might inspire more sophisticated applications of such an ordered structure in nanoplasmonics, biochemical sensing and nanophotonic devices.

  12. Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

    Directory of Open Access Journals (Sweden)

    Juergen Brugger

    2013-10-01

    Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

  13. Conical tungsten stamps for the replication of pore arrays in anodic aluminium oxide films

    Science.gov (United States)

    LeClere, D. J.; Thompson, G. E.; Derby, B.

    2009-06-01

    A tungsten master stamp has been generated by applying a novel procedure that includes two-step anodizing, followed by sequential anodizing and pore widening to develop nominally funnelled pores. These conical-shaped pores were filled with tungsten by sputter coating to manufacture a master stamp. Under a pressure of 65 MPa, the master stamp successfully embossed the surface of annealed and electropolished aluminium. The embossed surface was then used to control the position of pores created by anodizing under the conditions used to produce the original pore array.

  14. Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

    Science.gov (United States)

    Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

    2017-12-01

    Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

  15. Mars Express/MARSIS - Analysis and solution of an anomaly event: MARSIS Data Bad Time Stamp

    Science.gov (United States)

    Giuppi, S.; Cartacci, M.; Cicchetti, A.; Noschese, R.; Orosei, R.

    2011-10-01

    This paper describes the detection, the analysis and the possible solutions of an anomaly event occurred sometimes in MARSIS science data consisting in the corruption of the Spacecraft Event Time (SCET): MARSIS Data Bad Time Stamp.

  16. Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

    CERN Document Server

    Lim, Yongseob; Ulsoy, A Galip

    2014-01-01

    Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

  17. 31 CFR 500.410 - Currency, coins, and postage and other stamps.

    Science.gov (United States)

    2010-07-01

    ... postage and other stamps issued by North Korea, North Viet-Nam, Cambodia, or South Viet-Nam are merchandise of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin subject to § 500.204(a)(1). ...

  18. A burial with a stamp seal depicting a Bes-like figure from Abusir

    Czech Academy of Sciences Publication Activity Database

    Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

    2015-01-01

    Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

  19. High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

    Science.gov (United States)

    Valls, I.; Hamasaiid, A.; Padré, A.

    2017-09-01

    In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

  20. Insulation from basaltic stamp sand. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, F. D.

    1981-04-01

    A Midwest Appropriate Technology Grant was awarded to determine the technical and economic feasibility of producing mineral-fiber insulation directly from extensive deposits of basaltic sand produced during former mining and milling operations in the Keweenaw Peninsula region of Michigan's Upper Peninsula. The amounts of local basaltic sands available and representative chemical compositions were determined. The variation of viscosity with temperature and chemical composition was estimated. Samples were melted and either pulled or blown into fiber. In all cases fiber could be made with a reasonable tensile strength to ensure usefulness. It was concluded that it was technically feasible to produce fibers from basaltic stamp sands of the Upper Peninsula of Michigan. A technical feasibility study using published data, a cost and design analysis of a basalt fiber production plant, a market survey of fiber needs, and an economic analysis for investing in a basalt fiber venture was undertaken. These studies concluded that the local production of basaltic insulation was both feasible and economically reasonable. It was suggested that the plant be located in a region of greater population density with lower utility costs. A representative one-third of these studies is included as appendices A, B, C, and D.

  1. Investigation of the reduction of mouldboard ploughshare wear through hot stamping and hardfacing processes

    OpenAIRE

    YAZICI, Aysel

    2014-01-01

    The effects of the hot stamping process and different hardfacing techniques, such as shielded metal arc welding (SMAW) and gas metal arc welding (GMAW), on the abrasive wear of ploughshares were investigated under field operational conditions. The abrasive wear losses were determined by measuring the weight and dimension changes before and after tillage. The wear losses of hot-stamped and hardfaced ploughshares were less significant than those of the conventionally heat-treated ploughshare sp...

  2. Springback analysis of AA5754 after hot stamping: Experiments and FE modelling

    OpenAIRE

    Wang, A; Zhong, K; El Fakir, O; Sun, C; Wang, L; Lin, J; Dean, TA

    2016-01-01

    In this paper, the springback of the aluminium alloy AA5754 under hot stamping conditions was characterised under stretch and pure bending conditions. It was found that elevated temperature stamping was beneficial for springback reduction, particularly when using hot dies. Using cold dies, the flange springback angle decreased by 9.7 % when the blank temperature was increased from 20 to 450 ?C, compared to the 44.1 % springback reduction when hot dies were used. Various other forming conditio...

  3. Factors associated with consciousness recovery time after liver transplantation in recipients with hepatic encephalopathy.

    Science.gov (United States)

    Kim, K M; Kim, G S; Ko, J S; Gwak, M S; Lee, S-K; Son, M G

    2014-04-01

    Hepatic encephalopathy (HE) occurs as a result of liver failure and is often considered to be a clinical indication for liver transplantation (LT). An assessment of post-transplantation consciousness level in recipients with HE is crucial, because recovery of consciousness implies reestablishment of transplant liver function and lack of perioperative brain damage. The purpose of this study is to evaluate factors associated with consciousness recovery time after LT in recipients with HE. Out of 633 adult recipients who underwent LT, recipients who exhibited HE at the time of LT were analyzed retrospectively. The time between graft reperfusion and postoperative consciousness recovery was determined, and recipients were divided into 2 groups: group E with recovery of consciousness early (≤48 hours), and group L with recovery of consciousness late (>48 hours). Analyzed variables included recipient sex, age, graft type, Model for End-Stage Liver Disease score, HE history/duration/type/grade, and preoperative laboratory values, including blood ammonia concentration. HE was present at the time of LT in 69 (10.9%) of 633 recipients. Among the 69 recipients, 11 recipients who died or underwent reoperation before consciousness recovery were excluded, and 58 recipients (group E: n = 32; group L: n = 26) were enrolled into analysis. Multivariate analysis showed that HE duration >5 days (odds ratio [OR], 15.58; 95% confidence interval [CI], 1.35-179.56; P = .028) and HE type C (OR, 30.90; 95% CI, 1.67-573.48; P = .021) were the independent factors associated with late recovery from HE after LT. We suggest that recipients with long-duration or type C HE should be carefully managed during the post-transplantation period to prevent deterioration of HE. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Medicaid Managed Care Enrollment Report

    Data.gov (United States)

    U.S. Department of Health & Human Services — This report is composed annually and profiles enrollment statistics on Medicaid managed care programs on a plan-specific level. This report also provides...

  5. Medicaid Enrollment - New Adult Group

    Data.gov (United States)

    U.S. Department of Health & Human Services — Total Medicaid Enrollees - VIII Group Break Out Report Reported on the CMS-64 The enrollment information is a state-reported count of unduplicated individuals...

  6. A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

    Science.gov (United States)

    Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

    2011-08-01

    Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

  7. Hot Stamping of Boron Steel Using Partition Heating for Tailored Properties: Experimental Trials and Numerical Analysis

    Science.gov (United States)

    Mu, Yanhong; Wang, Baoyu; Zhou, Jing; Huang, Xu; Li, Xuetao

    2017-11-01

    Hot-stamped components with tailored properties are becoming popular for their better performance in collision. In this article, an M-shaped part with varying properties was formed by hot stamping using partition heating. Different soaking temperatures induce different austenite fractions at the different regions of the blank, resulting in the partitioned microstructure and mechanical properties in a single part. In the high-temperature region, the average tensile strength and elongation are 1565 MPa and 8.65 pct, respectively, and the average tensile strength and elongation are 626 MPa and 24.37 pct, respectively, in the low-temperature region. A finite element model of hot stamping using partition heating was established based on the relationship of austenite fraction with heating temperature determined by the dilatometer test and the stress-strain curve of 22MnB5 with different austenite fractions acquired from the hot tensile test.The differences of temperature, thickness, and Vickers hardness in different zones of the M-shaped part during forming and quenching stages were analyzed. The effects of hot stamping parameters, such as stamping velocity and heating temperature, on the forming and mechanical properties of the tailored M-shaped part were investigated, providing theoretical guidance for the production of tailored hot-stamped components using partition heating.

  8. Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

    Science.gov (United States)

    Wang, Yuhuang [Evanston, IL; Hauge, Robert H [Houston, TX; Schmidt, Howard K [Houston, TX; Kim, Myung Jong [Houston, TX; Kittrell, W Carter [Houston, TX

    2009-09-08

    The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

  9. Peripheral Muscle Strength Indicates Respiratory Function Testing in Renal Recipients.

    Science.gov (United States)

    Ulubay, Gaye; Uyanik, Saliha; Er Dedekarginoglu, Balam; Serifoglu, Irem; Kupeli, Elif; Savas Bozbas, Serife; Sezer, Siren; Haberal, Mehmet

    2017-02-01

    Muscle wasting occurs in renal recipients due to decreased physical performance, and decreased respiratory muscle strength may occur due to changes in structure and function. Data are scarce regarding the roles of sarcopenia and nutritional status on respiratory muscle function in these patients. Here, we evaluated interactions among peripheral muscle strength, sarcopenia, nutritional parameters, and respiratory muscle function in renal transplant recipients. Ninety-nine patients were prospectively enrolled between September and April 2016 at Baskent University. Forced vital capacity values (via pulmonary function tests), respiratory muscle strength (via maximal static inspiratory and expiratory pressures), and peripheral muscle strength (via hand grip strength test) were recorded. Nutritional parameters, fat weight, arm circumference, waist circumference, and C-reactive protein levels were also recorded. Of 99 patients, 68 were renal transplant recipients (43 men, mean age: 39.09 ± 10.70 y) and 31 were healthy participants (14 men, mean age: 34.94 ± 10.95 y). Forced vital capacity (P .05). No statistically significant relation was observed between biochemical parameters and maximal inspiratory and expiratory pressures (P ? .05). Respiratory function and peripheral muscle strength were significantly related in renal transplant recipients, with significantly lower peripheral muscle strength suggesting the presence of inadequate respiratory function. Peripheral and respiratory muscle training and nutritional replacement strategies could help to improve postoperative respiratory function.

  10. Tribological performances of new steel grades for hot stamping tools

    Science.gov (United States)

    Medea, F.; Venturato, G.; Ghiotti, A.; Bruschi, S.

    2017-09-01

    In the last years, the use of High Strength Steels (HSS) as structural parts in car body-in-white manufacturing has rapidly increased thanks to their favourable strength-to-weight ratio and stiffness, which allow a reduction of the fuel consumption to accommodate the new restricted regulations for CO2 emissions control. The survey of the technical and scientific literature shows a large interest in the development of different coatings for the blanks from the traditional Al-Si up to new Zn-based coatings and on the analysis of hard PVD, CVD coatings and plasma nitriding applied on the tools. By contrast, fewer investigations have been focused on the development and test of new tools steels grades capable to improve the wear resistance and the thermal properties that are required for the in-die quenching during forming. On this base, the paper deals with the analysis and comparison the tribological performances in terms of wear, friction and heat transfer of new tool steel grades for high-temperature applications, characterized by a higher thermal conductivity than the commonly used tools. Testing equipment, procedures as well as measurements analyses to evaluate the friction coefficient, the wear and heat transfer phenomena are presented. Emphasis is given on the physical simulation techniques that were specifically developed to reproduce the thermal and mechanical cycles on the metal sheets and dies as in the industrial practice. The reference industrial process is the direct hot stamping of the 22MnB5 HSS coated with the common Al-Si coating for automotive applications.

  11. Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

    Directory of Open Access Journals (Sweden)

    Asiyeh Amouei

    2018-02-01

    Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

  12. Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping

    OpenAIRE

    Chokshi, Prasun; Dashwood, R. J.; Hughes, Darren J.

    2017-01-01

    Because of demand for lower emissions and better crashworthiness, the use of hot stamped 22MnB5 boron steel has greatly increased in manufacturing of automobile components. However, for many applications it is required that only certain regions in hot stamped parts are fully hardened whereas other regions need be more ductile. The innovative process of tailored hot stamping does this by controlling the localized microstructures through tailored cooling rates by dividing the tooling into heate...

  13. Association Between Spousal Caregiver Well-Being and Care Recipient Healthcare Expenditures.

    Science.gov (United States)

    Ankuda, Claire K; Maust, Donovan T; Kabeto, Mohammed U; McCammon, Ryan J; Langa, Kenneth M; Levine, Deborah A

    2017-10-01

    To measure the association between spousal depression, general health, fatigue and sleep, and future care recipient healthcare expenditures and emergency department (ED) use. Prospective cohort study. Health and Retirement Study. Home-dwelling spousal dyads in which one individual (care recipient) was aged 65 and older and had one or more activity of daily living or instrumental activity of daily living disabilities and was enrolled in Medicare Part B (N = 3,101). Caregiver sleep (Jenkins Sleep Scale), depressive symptoms (Center for Epidemiologic Studies Depression-8 Scale), and self-reported general health measures. Primary outcome was care recipient Medicare expenditures. Secondary outcome was care recipient ED use. Follow-up was 6 months. Caregiver depressive symptoms score and six of 17 caregiver well-being measures were prospectively associated with higher care recipient expenditures after minimal adjustment (P care recipient expenditures remained significantly associated with caregiver fatigue (cost increase, $1,937, 95% confidence interval (CI) = $770-3,105) and caregiver sadness (cost increase, $1,323, 95% CI = $228-2,419) after full adjustment. Four of 17 caregiver well-being measures, including severe fatigue, were significantly associated with care recipient ED use after minimal adjustment (P care recipient ED use remained significantly associated with caregiver fatigue (odds ratio (OR) = 1.24, 95% CI = 1.01-1.52) and caregiver fair to poor health (OR = 1.23, 95% CI = 1.04-1.45) after full adjustment. Caregiver total sleep score was not associated with care recipient outcomes. Poor caregiver well-being, particularly severe fatigue, is independently and prospectively associated with higher care recipient Medicare expenditures and ED use. © 2017, Copyright the Authors Journal compilation © 2017, The American Geriatrics Society.

  14. 42 CFR 423.32 - Enrollment process.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Enrollment process. 423.32 Section 423.32 Public... Enrollment process. (a) General rule. A Part D eligible individual who wishes to enroll in a PDP may enroll... approved by CMS. (c) Timely process an individual's enrollment request. A PDP sponsor must timely process...

  15. Dual Enrollment for High School Students

    Science.gov (United States)

    Edwards, Linsey; Hughes, Katherine

    2011-01-01

    Dual enrollment programs allow high school students to enroll in college courses and potentially earn college credit. The term concurrent enrollment is sometimes used interchangeably with dual enrollment, and sometimes to refer to a particular model of dual enrollment. In some programs, students earn high school and college credit simultaneously;…

  16. Increasing Enrollment through Benefit Segmentation.

    Science.gov (United States)

    Goodnow, Betty

    1982-01-01

    The applicability of benefit segmentation, a market research technique which groups people according to benefits expected from a program offering, was tested at the College of DuPage. Preferences and demographic characteristics were analyzed and program improvements adopted, increasing enrollment by 20 percent. (Author/SK)

  17. Stamped coal cakes in cokemaking technology Part 2 - The investigation of cake strength

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before the pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the cokemaking plant using cost efficient raw materials, but also increases oven throughput. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend and as a function of the stamping energy. In the first part of the paper, investigations on the stampability of coal blends were reported. In this paper, the development of a new strength test device for the systematic investigation of mechanical strength of coal compacts produced by stamping is described. Results from compressive strength tests indicate an elastic-plastic behaviour with failure by plastic fracture. Shear test results show similarity to the yield limit description in soil mechanics.

  18. Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

    Science.gov (United States)

    Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

    2017-04-01

    The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

  19. AMS/DOE Fellowship Recipients

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Stephanie [American Meteorological Society, Boston, MA (United States)

    2016-11-21

    The AMS/DOE graduate fellowships were awarded to three students entering their first year of graduate study. The funds allowed each student to take a full course load during their first of year of graduate study which helps each of them to enter the professional, scientific community at an earlier date. Each recipient is academically outstanding, received glowing references of support and demonstrated their strong desire to perform scientific research. As part of the fellowship, each of the students was invited to attend the AMS Annual Meeting where they got to participate in the AMS student conference, attend scientific sessions and visit the exhibition hall. In addition, a student awards luncheon was held where each of the recipients got to meet their sponsor and receive a certificate.

  20. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  1. Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

    International Nuclear Information System (INIS)

    Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

    2013-01-01

    The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

  2. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    Directory of Open Access Journals (Sweden)

    Nosova Ekaterina

    2017-01-01

    Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

  3. Modeling the constitutive and frictional behavior of PTFE flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Hattel, Jesper Henri

    2013-01-01

    In the present work, the deformation on micro-scale of PTFE flexible stamps for nanoimprint lithography is modeled. This is achieved via a combination of proper models for the constitutive behavior as well as the frictional conditions between the deforming PTFE stamp and the steel tool. The model...... was verified through an experiment, where a PTFE sheet was deformed by a steel sphere mounted in a tensile test machine. Good agreement between simulations and experimental results is found, both regarding force–displacement and corresponding principal strain measurements. As expected, applying the correct...... frictional behavior between PTFE and steel on micro-scale is shown to be of major importance in order to accurately simulate the strain field in the deformed PTFE stamp. © 2013 Elsevier B.V. All rights reserved...

  4. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    International Nuclear Information System (INIS)

    Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

    2016-01-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

  5. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    Science.gov (United States)

    Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

    2016-02-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

  6. viStaMPS: The Application For Viewing And Manipulating StaMPS Results

    Science.gov (United States)

    Sousa, Joaquim; Sousa, Antonio; Magalhaes, Luis; Ruiz, Antonio

    2013-12-01

    viStaMPS (visual StaMPS) is a new visual application developed to enhance the visualization, manipulation and exportation of StaMPS results. The programmed application is developed in Matlab® through the Graphical User Interface (GUI) and no coding is required for running it, which avoids any programming language knowledge for standard uses. This tool integrates fully new features together with various scripts from StaMPS, allowing the generation of the desired plots/maps in a user-friendly interface. It is done by simply clicking some buttons or changing some parameters located in visual panels, instead of input commands in a prompt. Moreover, since it is written in Matlab, it gives the users the opportunity to access the data very easily and make their own modifications. Being a research tool, viStaMPS is continually under development and will count on the dynamism of its users to improve and/or add new features.

  7. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  8. Investigation of the influence of process parameters on adhesive wear under hot stamping conditions

    Science.gov (United States)

    Schwingenschlögl, P.; Weldi, M.; Merklein, M.

    2017-09-01

    Current challenges like increasing safety standards and reducing fuel consumption motivate lightweight construction in modern car bodies. Besides using lightweight workpiece materials like aluminum, hot stamping has been established as a key technology for producing safety relevant components. Producing hot stamped parts out of ultra-high strength steels offers the possibility to improve the crash performance. At the same time the weight of car structure is reduced by using thinner sheet thicknesses. In order to avoid oxide scale formation and ensure corrosion protection, AlSi coatings are commonly deposited on the sheet surfaces used for direct hot stamping. This workpiece coating has a critical impact on the tribological conditions within the forming process and, as a consequence, influences the quality of hot stamped parts as well as tool wear. AlSi coatings have been identified as major reason for adhesive wear, which represents the main wear mechanism in hot stamping. Within this study, the influence of the process parameters on adhesive wear are investigated in dependency of workpiece and tool temperatures, drawing velocities and contact pressures. The tribological behavior is analyzed based on strip drawing experiments under direct hot stamping conditions. The experiments are performed with AlSi coated 22MnB5 in contact with the hot working tool steel 1.2367. For analyzing the amount of adhesion on the friction jaws, the surfaces are characterized by optical measurements. The experiments indicate that higher workpiece temperatures cause severe adhesive wear on the tool surface, while an increase of drawing velocity or contact pressure led to reduced adhesion. The measured friction coefficients decreased with rising amount of adhesion and remained at a constant level after a certain adhesive layer was built up on the tool surface.

  9. STAMPS: software tool for automated MRI post-processing on a supercomputer

    OpenAIRE

    Bigler, Don C.; Aksu, Yaman; Yang, Qing X.

    2009-01-01

    This paper describes a Software Tool for Automated MRI Post-processing (STAMP) of multiple types of brain MRIs on a workstation and for parallel processing on a supercomputer (STAMPS). This software tool enables the automation of nonlinear registration for a large image set and for multiple MR image types. The tool uses standard brain MRI post-processing tools (such as SPM, FSL, and HAMMER) for multiple MR image types in a pipeline fashion. It also contains novel MRI post-processing features....

  10. A compact system for large-area thermal nanoimprint lithography using smart stamps

    DEFF Research Database (Denmark)

    Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

    2008-01-01

    We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure f...... is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for mu m-scale features is demonstrated....

  11. Development and introduction of stamping technique for large-size laterals of NPP pipelines

    International Nuclear Information System (INIS)

    Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

    1984-01-01

    The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

  12. Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

    International Nuclear Information System (INIS)

    Zhang Fengxiang; Low, Hong Yee

    2008-01-01

    Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

  13. Internet-Based Training to Improve Preschool Playground Safety: Evaluation of the Stamp-in-Safety Programme

    Science.gov (United States)

    Schwebel, David C.; Pennefather, Jordan; Marquez, Brion; Marquez, Jessie

    2015-01-01

    Objective: Playground injuries result in over 200,000 US pediatric emergency department visits annually. One strategy to reduce injuries is improved adult supervision. The Stamp-in-Safety programme, which involves supervisors stamping rewards for children playing safely, has been demonstrated in preliminary classroom-based work to reduce child…

  14. Experimental Investigations of the In-Die Quenching Efficiency and Die Surface Temperature of Hot Stamping Aluminium Alloys

    Directory of Open Access Journals (Sweden)

    Kailun Zheng

    2018-04-01

    Full Text Available The in-die quenching is a key stage in the hot stamping volume production chain which determines the post-formed strength of lightweight alloy components, tool life, and hot stamping productivity. In this paper, the performance of in-die quenching, reflected by the quenching efficiency (the time of work-piece held within stamping dies and die surface temperature during the simulated hot stamping process of AA6082, was experimentally and analytically investigated. A range of in-die quenching experiments were performed for different initial work-piece and die temperatures, quenching pressures, work-piece thickness, and die clearances, under hot stamping conditions. In addition, a one-dimensional (1D closed-form heat transfer model was used to calculate the die surface temperature evolution that is difficult to obtain during practical manufacture situations. The results have shown that the in-die quenching efficiency can be significantly increased by decreasing the initial work-piece and die temperatures. Die clearances are required to be designed precisely to obtain sufficiently high quenching rates and satisfying post-formed strength for hot-stamped panel components. This study systematically considered an extensive variety of influencing factors on the in-die quenching performance, which can provide practical guides for stamping tool designers and manufacture systems for hot-stamping volume production.

  15. 42 CFR 417.540 - Enrollment costs.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Enrollment costs. 417.540 Section 417.540 Public... PLANS Medicare Payment: Cost Basis § 417.540 Enrollment costs. (a) Principle. Enrollment costs are... of costs included. Enrollment costs include, but are not limited to, reasonable costs incurred in...

  16. Stamping an S on DMEK Donor Tissue to Prevent Upside-Down Grafts: Laboratory Validation and Detailed Preparation Technique Description.

    Science.gov (United States)

    Veldman, Peter B; Dye, Philip K; Holiman, Jeffrey D; Mayko, Zachary M; Sáles, Christopher S; Straiko, Michael D; Stoeger, Christopher G; Terry, Mark A

    2015-09-01

    To report endothelial cell loss (ECL) caused by a novel S-stamp preparation technique for Descemet membrane endothelial keratoplasty (DMEK). Six cadaveric human corneas were prepared for DMEK transplantation using a single standardized technique, including the application of a dry ink gentian violet S-stamp to the stromal side of Descemet membrane. Endothelial cell death was evaluated and quantified using computerized analysis of vital dye staining. ECL caused by the S-stamp was 0.6% (range 0.1%-1.0%), which comprised less than one-tenth of the total ECL caused by our preparation of the DMEK graft from the start to finish, including recovery, prestripping, S-stamping, and trephination (13.7% total ECL, range 9.9%-17.6%). Our novel S-stamp donor tissue preparation technique is intuitive to learn and holds the promise of preventing iatrogenic primary graft failure due to upside-down grafts without causing unacceptable increases in ECL.

  17. Aluminium Pneumoconiosis I. In Vitro Comparison of Stamped Aluminium Powders Containing Different Lubricating Agents and a Granular Aluminium Powder

    Science.gov (United States)

    Corrin, B.

    1963-01-01

    The discrepancy in previous reports of the action of aluminium on the lung may be explained by differences between stamped and granular aluminium powders. A stamped powder of the variety causing pulmonary fibrosis showed a brisk reaction with water, but a granular powder was unreactive. This difference is primarily due to the granular particles being covered by inert aluminium oxide, the formation of which is partially prevented in the stamping process by stearine and mineral oil. The reactivity of the flake-like stamped particles is also dependent on their large surface area per unit volume. The appearance of aluminium pneumoconiosis in Britain is explained by the introduction of mineral oil into the stamping industry for, in contrast to stearine, mineral oil permits the powder to react with water. The lung damage is believed to be caused by a soluble form of aluminium. PMID:14072616

  18. Physics Doctorates One Year after Degree: Data from the Follow-Up Survey of Degree Recipients from the Classes of 2011 and 2012. Focus On

    Science.gov (United States)

    Mulvey, Patrick; Pold, Jack; Tesfaye, Casey

    2014-01-01

    Each fall the American Institute of Physics (AIP) Statistical Research Center conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the U.S. to provide information concerning the number of students they have enrolled and the counts of recent degree recipients. In connection with this…

  19. Physics Doctorates Initial Employment: Data from the Degree Recipient Follow-Up Survey for the Classes of 2011 and 2012. Focus On

    Science.gov (United States)

    Mulvey, Patrick; Pold, Jack

    2014-01-01

    Each fall the Statistical Research Center (SRC) conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the U.S. to provide information concerning the number of students they have enrolled and the counts of recent degree recipients. In connection with this survey, SRC asks for the names…

  20. Kindergarden - Enrollments 2012-2013

    CERN Multimedia

    Kindergarden

    2012-01-01

      Enrollments 2012-2013   Monday 5, Tuesday 6, and Wednesday 7 March From 8.00 to 10.00 at the Nursery School   Registration forms will be available from 2nd March onwards: – At the Nursery School, from the Secretary, tel : 73604.    Catherine.Regelbrugge@cern.ch. – At the Nursery School, from the Headmistress, tel : 77925.    Brigitte.Pillionnel@cern.ch. – On the pages of the Nursery School website http://cern.ch/kindergarten/docs/cond%20gales%2012-2013%20EN.pdf. 

  1. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    Science.gov (United States)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-03-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation.

  2. Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

    NARCIS (Netherlands)

    Karanikas, Nektarios; Schwarz, M; Harfmann, J

    2017-01-01

    A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

  3. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2012-12-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  4. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2013-02-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  5. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    International Nuclear Information System (INIS)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-01-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

  6. 41 CFR 101-25.103-4 - Disposition of promotional materials, trading stamps, or bonus goods.

    Science.gov (United States)

    2010-07-01

    ..., arrange for transfer of promotional materials, trading stamps, or bonus goods, without reimbursement in...) The contract does not contain a price reduction clause, or (2) The contractor refuses to grant a price... promotional items as a price reduction, and (4) The procuring or receiving agency has no practical use for the...

  7. 75 FR 4911 - Food Stamp Program: Eligibility and Certification Provisions of the Farm Security and Rural...

    Science.gov (United States)

    2010-01-29

    .... Several commenters suggested that the Department amend the current regulations to clarify that human trafficking victims and certain family members are eligible for food stamps to ensure that victims and their...). The guidance reflects the requirements under the ``Trafficking Victims Protection Act of 2000'' (Pub...

  8. Fabrication of microlens array on silicon surface using electrochemical wet stamping technique

    Science.gov (United States)

    Lai, Lei-Jie; Zhou, Hang; Zhu, Li-Min

    2016-02-01

    This paper focuses on the fabrication of microlens array (MLA) on silicon surface by taking advantage of a novel micromachining approach, the electrochemical we stamping (E-WETS). The E-WETS allows the direct imprinting of MLA on an agarose stamp into the substrate through a selective anodic dissolution process. The pre-patterned agarose stamp can direct and supply the solution preferentially on the contact area between the agarose stamp and the substrate, to which the electrochemical reaction is confined. The anodic potential vs. saturated calomel electrode is optimized and 1.5 V is chosen as the optimum value for the electrochemical polishing of p-Si. A refractive MLA on a PMMA mold is successfully transferred onto the p-Si surface. The machining deviations of the fabricated MLA from those on the mold are 0.44% in diameter and 2.1% in height respectively, and the machining rate in HF is around 1.1 μm/h. The surface roughness of the fabricated MLA is less than 12 nm owing to the electrochemical polishing process. The results demonstrate that E-WETS is a promising approach to fabricate MLA on p-Si surface with high accuracy and efficiency.

  9. Honoring Avicenna, the great Persian physician on the world's postage stamps.

    Science.gov (United States)

    Afshar, Ahmadreza

    2010-09-01

    Many nations are indebted to Avicenna (Ibn-Sina) for their scientific progressions and civilization. Many countries in the Middle East, Africa, and Europe have honored Avicenna, the great Persian scientist, by depicting his vignette on their postage stamps. The symbolic value of Avicenna has been chosen to commemorate scientific occasions, achievements and anniversaries, which represents the ultimate performance of conscious honoring.

  10. 42 CFR 71.3 - Designation of yellow fever vaccination centers; Validation stamps.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Designation of yellow fever vaccination centers... Designation of yellow fever vaccination centers; Validation stamps. (a) Designation of yellow fever vaccination centers. (1) The Director is responsible for the designation of yellow fever vaccination centers...

  11. Food Stamp and School Lunch Programs Alleviate Food Insecurity in Rural America. Fact Sheet

    Science.gov (United States)

    Smith, Kristin; Savage, Sarah

    2007-01-01

    The Food Stamp and the National School Lunch Programs play a vital role in helping poor, rural Americans obtain a more nutritious diet and alleviate food insecurity and hunger. This fact sheet looks at the extent to which rural America depends on these programs and describes characteristics of beneficiaries of these federal nutrition assistance…

  12. Studying the Solar System Can Be More than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-01-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

  13. Stamped coal cakes in cokemaking technology Part 1 - A parameter study on stampability

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the coke making plant using cost efficient raw materials, but oven throughput is also increased. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend depending on the stamping energy. The first part of this paper defines the overall process objectives and presents results from systematic investigations of the effects of several coal properties on the so called stampability as the integral model parameter for compacting. Surface moisture, coal granulometry and mechanical properties have significant influence on the densification. The incorporation of these parameters into the model allows the differentiated calculation of the cake density.

  14. Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

    NARCIS (Netherlands)

    Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

    2007-01-01

    The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

  15. Micropatterning of a stretchable conductive polymer using inkjet printing and agarose stamping

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; Hassager, Ole; Larsen, Niels Bent

    2007-01-01

    ,4-ethylenedioxythiophene) (PEDOT). The agarose stamping produced 50 μm wide conducting lines with high spatial fidelity. The deactivation agent was found to cause some degradation of the remaining conducting lines, as revealed by a stronger increase in resistance upon straining compared to the pristine polymer material...

  16. MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

    Science.gov (United States)

    Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

    2014-01-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

  17. Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

    Science.gov (United States)

    Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

    2013-12-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

  18. Recipient screening in IVF: First data from women undergoing anonymous oocyte donation in Dublin

    Directory of Open Access Journals (Sweden)

    Salma Umme

    2011-04-01

    Full Text Available Abstract Background Guidelines for safe gamete donation have emphasised donor screening, although none exist specifically for testing oocyte recipients. Pre-treatment assessment of anonymous donor oocyte IVF treatment in Ireland must comply with the European Union Tissues and Cells Directive (Directive 2004/23/EC. To determine the effectiveness of this Directive when applied to anonymous oocyte recipients in IVF, we reviewed data derived from selected screening tests performed in this clinical setting. Methods Data from tests conducted at baseline for all women enrolling as recipients (n = 225 in the anonymous oocyte donor IVF programme at an urban IVF referral centre during a 24-month period were analysed. Patient age at programme entry and clinical pregnancy rate were also tabulated. All recipients had at least one prior negative test for HIV, Hepatitis B/C, chlamydia, gonorrhoea and syphilis performed by her GP or other primary care provider before reproductive endocrinology consultation. Results Mean (±SD age for donor egg IVF recipients was 40.7 ± 4.2 yrs. No baseline positive chlamydia, gonorrhoea or syphilis screening results were identified among recipients for anonymous oocyte donation IVF during the assessment interval. Mean pregnancy rate (per embryo transfer in this group was 50.5%. Conclusion When tests for HIV, Hepatitis B/C, chlamydia, gonorrhoea and syphilis already have been confirmed to be negative before starting the anonymous donor oocyte IVF sequence, additional (repeat testing on the recipient contributes no new clinical information that would influence treatment in this setting. Patient safety does not appear to be enhanced by application of Directive 2004/23/EC to recipients of anonymous donor oocyte IVF treatment. Given the absence of evidence to quantify risk, this practice is difficult to justify when applied to this low-risk population.

  19. Recipient screening in IVF: First data from women undergoing anonymous oocyte donation in Dublin

    LENUS (Irish Health Repository)

    Walsh, Anthony PH

    2011-04-20

    Abstract Background Guidelines for safe gamete donation have emphasised donor screening, although none exist specifically for testing oocyte recipients. Pre-treatment assessment of anonymous donor oocyte IVF treatment in Ireland must comply with the European Union Tissues and Cells Directive (Directive 2004\\/23\\/EC). To determine the effectiveness of this Directive when applied to anonymous oocyte recipients in IVF, we reviewed data derived from selected screening tests performed in this clinical setting. Methods Data from tests conducted at baseline for all women enrolling as recipients (n = 225) in the anonymous oocyte donor IVF programme at an urban IVF referral centre during a 24-month period were analysed. Patient age at programme entry and clinical pregnancy rate were also tabulated. All recipients had at least one prior negative test for HIV, Hepatitis B\\/C, chlamydia, gonorrhoea and syphilis performed by her GP or other primary care provider before reproductive endocrinology consultation. Results Mean (±SD) age for donor egg IVF recipients was 40.7 ± 4.2 yrs. No baseline positive chlamydia, gonorrhoea or syphilis screening results were identified among recipients for anonymous oocyte donation IVF during the assessment interval. Mean pregnancy rate (per embryo transfer) in this group was 50.5%. Conclusion When tests for HIV, Hepatitis B\\/C, chlamydia, gonorrhoea and syphilis already have been confirmed to be negative before starting the anonymous donor oocyte IVF sequence, additional (repeat) testing on the recipient contributes no new clinical information that would influence treatment in this setting. Patient safety does not appear to be enhanced by application of Directive 2004\\/23\\/EC to recipients of anonymous donor oocyte IVF treatment. Given the absence of evidence to quantify risk, this practice is difficult to justify when applied to this low-risk population.

  20. Overlapping buprenorphine, opioid, and benzodiazepine prescriptions among veterans dually enrolled in Department of Veterans Affairs and Medicare Part D.

    Science.gov (United States)

    Gellad, Walid F; Zhao, Xinhua; Thorpe, Carolyn T; Thorpe, Joshua M; Sileanu, Florentina E; Cashy, John P; Mor, Maria; Hale, Jennifer A; Radomski, Thomas; Hausmann, Leslie R M; Fine, Michael J; Good, Chester B

    2017-01-01

    Buprenorphine is a key tool in the management of opioid use disorder, but there are growing concerns about abuse, diversion, and safety. These concerns are amplified for the Department of Veterans Affairs (VA), whose patients may receive care concurrently from multiple prescribers within and outside VA. To illustrate the extent of this challenge, we examined overlapping prescriptions for buprenorphine, opioids, and benzodiazepines among veterans dually enrolled in VA and Medicare Part D. We constructed a cohort of all veterans dually enrolled in VA and Part D who filled an opioid prescription in 2012. We identified patients who received tablet or film buprenorphine products from either source. We calculated the proportion of buprenorphine recipients with any overlapping prescription (based on days supply) for a nonbuprenorphine opioid or benzodiazepine, focusing on veterans who received overlapping prescriptions from a different system than their buprenorphine prescription (Part D buprenorphine recipients receiving overlapping opioids or benzodiazepines from VA and vice versa). There were 1790 dually enrolled veterans with buprenorphine prescriptions, including 760 (43%) from VA and 1091 (61%) from Part D (61 veterans with buprenorphine from both systems were included in each group). Among VA buprenorphine recipients, 199 (26%) received an overlapping opioid prescription and 11 (1%) received an overlapping benzodiazepine prescription from Part D. Among Part D buprenorphine recipients, 208 (19%) received an overlapping opioid prescription and 178 (16%) received an overlapping benzodiazepine prescription from VA. Among VA and Part D buprenorphine recipients with cross-system opioid overlap, 25% (49/199) and 35% (72/208), respectively, had >90 days of overlap. Many buprenorphine recipients receive overlapping prescriptions for opioids and benzodiazepines from a different health care system than the one in which their buprenorphine was filled. These findings highlight

  1. Extracurricular associations and college enrollment.

    Science.gov (United States)

    Gibbs, Benjamin G; Erickson, Lance D; Dufur, Mikaela J; Miles, Aaron

    2015-03-01

    There is consistent evidence that student involvement in extracurricular activities (EAs) is associated with numerous academic benefits, yet understanding how peer associations within EAs might influence this link is not well understood. Using Add Health's comprehensive data on EA participation across 80 schools in the United States, we develop a novel measure of peer associations within EA activities. We find that EA participation with high achieving peers has a nontrivial link to college enrollment, even after considering individual, peer, and school-level factors. This suggests that school policies aimed at encouraging student exposure to high achieving peers in EAs could have an important impact on a student's later educational outcomes. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Dual Enrollment Participation from the Student Perspective

    Science.gov (United States)

    Kanny, M. Allison

    2015-01-01

    This chapter examines the experiences of five high school students previously enrolled in dual enrollment courses, and discusses the perceived benefits and disadvantages of these experiences from the student perspective.

  3. Rubber stamp templates for improving clinical documentation: A paper-based, m-Health approach for quality improvement in low-resource settings.

    Science.gov (United States)

    Kleczka, Bernadette; Musiega, Anita; Rabut, Grace; Wekesa, Phoebe; Mwaniki, Paul; Marx, Michael; Kumar, Pratap

    2018-06-01

    The United Nations' Sustainable Development Goal #3.8 targets 'access to quality essential healthcare services'. Clinical practice guidelines are an important tool for ensuring quality of clinical care, but many challenges prevent their use in low-resource settings. Monitoring the use of guidelines relies on cumbersome clinical audits of paper records, and electronic systems face financial and other limitations. Here we describe a unique approach to generating digital data from paper using guideline-based templates, rubber stamps and mobile phones. The Guidelines Adherence in Slums Project targeted ten private sector primary healthcare clinics serving informal settlements in Nairobi, Kenya. Each clinic was provided with rubber stamp templates to support documentation and management of commonly encountered outpatient conditions. Participatory design methods were used to customize templates to the workflows and infrastructure of each clinic. Rubber stamps were used to print templates into paper charts, providing clinicians with checklists for use during consultations. Templates used bubble format data entry, which could be digitized from images taken on mobile phones. Besides rubber stamp templates, the intervention included booklets of guideline compilations, one Android phone for digitizing images of templates, and one data feedback/continuing medical education session per clinic each month. In this paper we focus on the effect of the intervention on documentation of three non-communicable diseases in one clinic. Seventy charts of patients enrolled in the chronic disease program (hypertension/diabetes, n=867; chronic respiratory diseases, n=223) at one of the ten intervention clinics were sampled. Documentation of each individual patient encounter in the pre-intervention (January-March 2016) and post-intervention period (May-July) was scored for information in four dimensions - general data, patient assessment, testing, and management. Control criteria included

  4. Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

    Science.gov (United States)

    Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

    2015-01-01

    Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

  5. Dual Enrollment in Spanish: One Working Model

    Science.gov (United States)

    Bloom, Melanie; Chambers, Laura

    2009-01-01

    Dual enrollment is now a nation-wide phenomenon as all 50 states currently offer some form of dual-enrollment program to secondary-school students (Karp, Bailey, Hughes, and Fermin 2005). However, dual enrollment itself is often difficult to define as programs vary from school to school (Jordan, Cavalluzzo, and Corallo 2006). Therefore, language…

  6. 42 CFR 460.152 - Enrollment process.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Enrollment process. 460.152 Section 460.152 Public...) Participant Enrollment and Disenrollment § 460.152 Enrollment process. (a) Intake process. Intake is an intensive process during which PACE staff members make one or more visits to a potential participant's place...

  7. Can Welfare Mothers Hack It in College? A Comparison of Achievement between TANF Recipients and General Population Community College Students

    Science.gov (United States)

    Fenster, Judy

    2004-01-01

    The achievement of a group of undergraduate students enrolled in a pilot program for welfare recipients in the form of TANF (Temporary Aid to Needy Families) was compared with the achievement of general population students at an urban community college. Grades attained in a basic level, introductory Psychology course were used to measure academic…

  8. Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

    International Nuclear Information System (INIS)

    Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

    2007-01-01

    It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

  9. Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

    International Nuclear Information System (INIS)

    Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

    2012-01-01

    We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

  10. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    Science.gov (United States)

    Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

    2016-08-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

  11. Combined Randomized-Local Hough Transform versus UpWrite Transform in stamp detection

    Directory of Open Access Journals (Sweden)

    Daniela Tondini

    2003-10-01

    Full Text Available The conventional Hough Transform used for detection of objects with known shape and size has proved its robustness. One typical task for this transform can be the detection of stamp(s on an envelope. Unfortunately, the Hough Transform has an important drawback: the heavy computational effort and, as consequence, a big execution time. This paper introduces a variant of Hough Transform that speeds up the process. One important aid is given by a filtering step based on a fast analysis of a rough deformation model. This method is a combination of Randomized and Local Hough Transform. Experiments were made comparing the modified Hough Transform approach with the UpWrite Transform and they proved that the first approach preserves the quality of the Hough Transform results at a higher speed.

  12. Influence of operating parameters on coke end temperature in stamp charged batteries

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, U.S.; Sarkar, P.; Deshpande, D.P. [Tata Steel, Jamshedpur (India)

    2004-07-01

    Coke end temperature (CET) indicates the final temperature of coke mass after pushing it out from the oven and before quenching and thus is an indicator of the preparedness of the coke. Analysis of plant data from stamp charged batteries at Tata Steel show that it depends on coal blend characteristics and battery conditions. Increased input coal ash, its crushing fineness and volatile matters increases but the moisture decreases it. The heating rate, battery and regenerator temperatures all increase the coke end temperature. The present paper documents that observations on parameters influencing coke end temperature under stamp charged conditions and attempts to hypothesise the possible explanation for the results obtained. 3 refs., 10 figs., 2 tabs.

  13. Modeling and Simulating Material Behavior during Hot Blank - Cold Die (HB-CD) Stamping of Aluminium Alloy Sheets

    Science.gov (United States)

    Zhang, Nan; Abu-Farha, Fadi

    2016-08-01

    Hot blank - cold die (HB-CD) stamping, non-isothermal hot stamping, of aluminium alloy sheets offers great opportunities for high production rates at low cost, while overcoming limited material formability issues. Yet developing an accurate model that can describe the complex material behavior over the wide ranging conditions of HB-CD stamping (temperatures ranging between 25 and 350 °C) is challenging. Moreover, validation of the developed models under transient conditions is problematic. This work presents he results of a comprehensive characterization, material modeling, FE simulation and experimental validation effort to capture the behavior of an aluminium alloy sheet during HB-CD stamping. In particular, we highlight the integration between temperature measurements (thermography) and strain measurements (digital image correlation) for the accurate validation of model predictions of non-isothermal material deformation.

  14. 75 FR 11913 - Chrysler, LLC; Warren Stamping Plant, Including On-Site Leased Workers From Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... firm. The workers produce stamping parts for automobiles. New information shows that workers leased... under the control of the subject firm to be considered leased workers. Based on these findings, the...

  15. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    International Nuclear Information System (INIS)

    Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-01-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

  16. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Energy Technology Data Exchange (ETDEWEB)

    Altun, Ali Ozhan [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Jeong, Jun-Ho [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Rha, Jong-Joo [Surface Technology Research Center, Korea Institute of Machinery and Materials, 66 Sangnam-Dong, Changwon-Shi, Kyungnam-Do (Korea, Republic of); Kim, Ki-Don [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Lee, Eung-Sug [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of)

    2007-11-21

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75{sup 0}. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  17. A rapid co-culture stamping device for studying intercellular communication

    OpenAIRE

    Amin Hassanzadeh-Barforoushi; Jonathan Shemesh; Nona Farbehi; Mohsen Asadnia; Guan Heng Yeoh; Richard P. Harvey; Robert E. Nordon; Majid Ebrahimi Warkiani

    2016-01-01

    Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two a...

  18. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method.

    Science.gov (United States)

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2013-03-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  19. Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses

    OpenAIRE

    Daehn, G. S.; Shang, J.; Vohnout, V. J.

    2004-01-01

    Stamping failures consist of, broadly speaking, either tearing (excessive local strain energy) or wrinkling (insufficient or inappropriate local strain energy). Good parts are produced when the strain energy or plastic work is effectively distributed during the forming process such that tears and wrinkles are eliminated. The process window framed by tearing and wrinkling limits can be rather small for some materials, notably aluminum alloys. At present, there are no established methods of dir...

  20. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method

    OpenAIRE

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2012-01-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  1. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    OpenAIRE

    Luan, X; Liu, X; Fang, H; Ji, K; El Fakir, O; Wang, L

    2016-01-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast ir...

  2. Anisotropic behaviour law for sheets used in stamping: A comparative study of steel and aluminium

    OpenAIRE

    Sinou, Jean-Jacques; Macquaire, Bruno

    2008-01-01

    International audience; For a car manufacturer, reducing the weight of vehicles is an obvious aim. Replacing steel by aluminium moves towards that goal. Unfortunately, aluminium's stamping numerical simulation results are not yet as reliable as those of steel. Punch-strength and spring-back phenomena are not correctly described. This study on aluminium validates the behaviour law Hill 48 quadratic yield criterion with both isotropic and kinematic hardening. It is based on the yield surface an...

  3. Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

    Directory of Open Access Journals (Sweden)

    Aizawa Tatsuhiko

    2016-01-01

    Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

  4. Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

    Science.gov (United States)

    Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

    2017-09-01

    The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

  5. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Science.gov (United States)

    Ozhan Altun, Ali; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-11-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70 86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75°. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  6. Validation of the stamping method for CaSO{sub 4}:RE + Teflon® pellets production

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br, E-mail: lcrodri@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    The IPEN method for the CaSO{sub 4}:RE + Teflon® production, developed and patented at the Dosimetric Materials Laboratory - LMD/IPEN in the earlier 1980's, is highly time-demanding, so that the use of the stamping method, already widely industrially applied, would enhance the CaSO{sub 4}:RE + Teflon® pellets production. Thus, validating the stamping method, by comparing the dosimetric properties of a batch of pellets produced by each method, became a must. The stamped batch presents the same mean non-irradiated signals either after sintering or annealing while IPEN batch mean non-irradiated signals vary in 23%. The mean TL signal after irradiation was about 50 nC, but the standard deviation varies from 20% to 33% for IPEN batch and keeps in 10% for the stamped batch. 24 h after the irradiation, the TL signal decreased to about 35 nC, with no differences in IPEN batch standard deviation and a decrease to 5% in stamped batch standard deviation, for the five performed essays. Calibration curves present a linear behavior over the entire studied dose range and the same coefficients for both methods, however, the uncertainties in the coefficients determined to the calibration curve obtained with stamped pellets are significantly smaller, leading to a more precise dose determination. This results show that the stamping method produces more homogeneous batches, with pellets that maintain the dosimetric characteristics of the detectors produced by IPEN method, in such a way that the stamping method can substitute with advantages the IPEN method in the CaSO{sub 4}:RE + Teflon® dosimetric pellets production. (author)

  7. Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel

    Science.gov (United States)

    Zhu, Bin; Liu, Zhuang; Wang, Yanan; Rolfe, Bernard; Wang, Liang; Zhang, Yisheng

    2018-04-01

    Application of quenching and partitioning process in hot stamping has proven to be an effective method to improve the plasticity of advanced high-strength steels (AHSSs). In this study, the hot stamping and partitioning process of advanced high-strength steel 30CrMnSi2Nb is investigated with a hot stamping mold. Given the specific partitioning time and temperature, the influence of quenching temperature on the volume fraction of microstructure evolution and mechanical properties of the above steel are studied in detail. In addition, a model for quenching and partitioning process is applied to predict the carbon diffusion and interface migration during partitioning, which determines the retained austenite volume fraction and final properties of the part. The predicted trends of the retained austenite volume fraction agree with the experimental results. In both cases, the volume fraction of retained austenite increases first and then decreases with the increasing quenching temperature. The optimal quenching temperature is approximately 290 °C for 30CrMnSi2Nb with the partition conditions of 425 °C and 20 seconds. It is suggested that the model can be used to help determine the process parameters to obtain retained austenite as much as possible.

  8. Fabrication of 3D high aspect ratio PDMS microfluidic networks with a hybrid stamp.

    Science.gov (United States)

    Kung, Yu-Chun; Huang, Kuo-Wei; Fan, Yu-Jui; Chiou, Pei-Yu

    2015-04-21

    We report a novel methodology for fabricating large-area, multilayer, thin-film, high aspect ratio, 3D microfluidic structures with through-layer vias and open channels that can be bonded between hard substrates. It is realized by utilizing a hybrid stamp with a thin plastic sheet embedded underneath a PDMS surface. This hybrid stamp solves an important edge protrusion issue during PDMS molding while maintaining necessary stamp elasticity to ensure the removal of PDMS residues at through-layer regions. Removing edge protrusion is a significant progress toward fabricating 3D structures since high aspect ratio PDMS structures with flat interfaces can be realized to facilitate multilayer stacking and bonding to hard substrates. Our method also allows for the fabrication of 3D deformable channels, which can lead to profound applications in electrokinetics, optofluidics, inertial microfluidics, and other fields where the shape of the channel cross section plays a key role in device physics. To demonstrate, as an example, we have fabricated a microfluidic channel by sandwiching two 20 μm wide, 80 μm tall PDMS membranes between two featureless ITO glass substrates. By applying electrical bias to the two ITO substrates and pressure to deform the thin membrane sidewalls, strong electric field enhancement can be generated in the center of a channel to enable 3D sheathless dielectrophoretic focusing of biological objects including mammalian cells and bacteria at a flow speed up to 14 cm s(-1).

  9. Prevention of crack in stretch flanging process using hot stamping technique

    Science.gov (United States)

    Syafiq, Y. Mohd; Hamedon, Z.; Azila Aziz, Wan; Razlan Yusoff, Ahmad

    2017-10-01

    Demand for enhancing of passenger safety as well as weight reduction of automobiles has increased the use of high strength steel sheets. As a sheet metal is a lightweight having high strength is suitable for producing automotive parts such as white body panel. The stretch flanging of the high strength steel sheet is a problem due to high springback and easy to crack. This study uses three methods to stretch flange the sheets; using lubricants, shear-edge polishing and hot stamping. The effectiveness of these methods will be measured by comparing the flange length of each methods can achieved. For stretch flange with lubricant and polished sheared edge, the flange length failed to achieve the target 15 mm while hot stamping improved the formability of the sheet and preventing the occurrence of the springback and crack. Hot stamping not only improved formability of the sheet but also transformed the microstructure into martensite thus improve the hardness and the strength of the sheet after been quenched with the dies.

  10. Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

    Directory of Open Access Journals (Sweden)

    M. Kumar

    2017-01-01

    Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

  11. Conformal contact and pattern stability of stamps used for soft lithography

    Science.gov (United States)

    Bietsch, Alexander; Michel, Bruno

    2000-10-01

    Patterning in soft lithography techniques such as microcontact printing or light-coupling mask lithography is mediated by surface topographical patterns of elastomeric stamps: intimate contact with the substrate is achieved locally at the protruding areas, whereas a gap remains between the substrate and recessed zones. This principle challenges the properties of the stamp, especially when printing high-resolution or extreme aspect-ratio patterns with high accuracy. On the one hand, the stamp must be soft enough to enable conformal contact with the substrate, which means that it must adapt elastically without leaving voids created by the natural roughness of the substrate. On the other hand, a precise definition of micropatterns requires a rigid material. In this article, we analyze the conditions of elasticity, roughness, and energy of adhesion to establish conformal contact between an elastomer and the target surface. Furthermore, we address questions of replication accuracy and evaluate local elastic deformation induced by normal forces using model calculations for simple pattern geometries. Pressure applied during contact leads to a sagging or collapse of the unsupported areas. We discuss implications on both material and pattern design that allow spontaneous propagation of conformal contact while inhibiting the spreading of collapse.

  12. On the die face design for stamping an automotive engine hood

    Science.gov (United States)

    Chen, Ming-Zhi; Wang, Shi-Wei; Lin, Ching-I.; Chen, Fuh-Kuo

    2017-09-01

    Since the engine hood is mainly manufactured in the drawing operation, the die addendum design is the key to the success of manufacturing a defect free product. In this study, the existing die addendum designs corresponding to those engine hoods were reviewed and the design parameters were constructed. The preliminary study was then performed to examine the influences of the stamping die angle, binder surface shape, and die open line shape on the defects occurred in the part. Based on the simulation results, the optimum design for the die addendum face was then investigated and a systematic design guideline was proposed. In order to validate the proposed design guideline, actual engine hoods were stamped according to the finite element analysis and the production part shapes, thickness distributions, and the stretch at the central region were compared with those obtained from the finite element simulations. The consistent agreement between the product parts and the simulation results confirms the validity of the design guideline proposed in the present study for stamping an engine hood.

  13. Evaluation of resistless Ga+ beam lithography for UV NIL stamp fabrication

    Science.gov (United States)

    Rumler, M.; Fader, R.; Haas, A.; Rommel, M.; Bauer, A. J.; Frey, L.

    2013-09-01

    This paper presents an alternative rapid prototyping approach for the fabrication of stamps for UV nanoimprint lithography. In this process, areas implanted with gallium serve as an etch mask for the dry etching of quartz. The implantation is performed using a focused ion beam system. To avoid charging of the quartz substrate the use of thin layers of chromium or carbon on the quartz substrate has been evaluated. The resulting quartz structures exhibit very smooth surfaces after dry etching, if the implantation dose is high enough to form a stable etch mask. Furthermore, anisotropic etching could be realized by optimization of a quartz etching process involving C4F8 and O2 after the use of resistless Ga+ beam lithography. Finally, imprints into a UV curing resist are performed successfully with the manufactured stamps, proving that the presence of Ga rich areas on the stamp is not detrimental to the curing of the resist or the functionality of the anti-sticking layer.

  14. Intestinal parasitic infections in renal transplant recipients.

    Science.gov (United States)

    Azami, Mehdi; Sharifi, Mehran; Hejazi, Sayed Hossein; Tazhibi, Mehdi

    2010-01-01

    The impact of intestinal parasitic infection in renal transplant recipients requires careful consideration in the developing world. However, there have been very few studies addressing this issue in Iran. This study was conducted to determine the prevalence of intestinal parasitic infections in renal transplant recipients in Iran. Stool specimens from renal transplant recipients and control groups were obtained between June 2006 and January 2007. The samples screened for intestinal parasitic infections using direct smear, formalin-ether sedimentation, Sheather's flotation and modified Ziehl-Neelsen staining methods. Out of 150 renal transplant recipients, 33.3% (50), and out of 225 control group, 20% (45) were infected with one or more type of intestinal parasites. The parasites detected among patients included Entamoeba coli (10.6%), Endolimax nana (8.7%), Giardia lamblia (7.4%), Blastocystis spp. (4.7%), Iodamoeba butschlii (0.7%), Chilomastix mesnili (0.7%) and Ascaris lumbricoides (0.7%). Multiple infections were more common among renal transplant recipients group (p < 0.05). This study highlights the importance of testing for intestinal parasites among Iranian renal transplant recipients. Routine examinations of stool samples for parasites would significantly benefit the renal transplant recipients by contributing to reduce severe infections.

  15. Intestinal parasitic infections in renal transplant recipients

    Directory of Open Access Journals (Sweden)

    Mehdi Azami

    Full Text Available The impact of intestinal parasitic infection in renal transplant recipients requires careful consideration in the developing world. However, there have been very few studies addressing this issue in Iran. This study was conducted to determine the prevalence of intestinal parasitic infections in renal transplant recipients in Iran. Stool specimens from renal transplant recipients and control groups were obtained between June 2006 and January 2007. The samples screened for intestinal parasitic infections using direct smear, formalin-ether sedimentation, Sheather's flotation and modified Ziehl-Neelsen staining methods. Out of 150 renal transplant recipients, 33.3% (50, and out of 225 control group, 20% (45 were infected with one or more type of intestinal parasites. The parasites detected among patients included Entamoeba coli (10.6%, Endolimax nana (8.7%, Giardia lamblia (7.4%, Blastocystis spp. (4.7%, Iodamoeba butschlii (0.7%, Chilomastix mesnili (0.7% and Ascaris lumbricoides (0.7%. Multiple infections were more common among renal transplant recipients group (p < 0.05. This study highlights the importance of testing for intestinal parasites among Iranian renal transplant recipients. Routine examinations of stool samples for parasites would significantly benefit the renal transplant recipients by contributing to reduce severe infections.

  16. Cancer incidence in blood transfusion recipients

    DEFF Research Database (Denmark)

    Hjalgrim, Henrik; Edgren, Gustaf; Rostgaard, Klaus

    2007-01-01

    BACKGROUND: Blood transfusions may influence the recipients' cancer risks both through transmission of biologic agents and by modulation of the immune system. However, cancer occurrence in transfusion recipients remains poorly characterized. METHODS: We used computerized files from Scandinavian...... blood banks to identify a cohort of 888,843 cancer-free recipients transfused after 1968. The recipients were followed from first registered transfusion until the date of death, emigration, cancer diagnosis, or December 31, 2002, whichever came first. Relative risks were expressed as ratios......, the standardized incidence ratios for cancers of the tongue, mouth, pharynx, esophagus, liver, and respiratory and urinary tracts and for squamous cell skin carcinoma remained elevated beyond 10 years after the transfusion. CONCLUSIONS: The marked increase in cancer risk shortly after a blood transfusion may...

  17. Immunosuppression in the elderly renal allograft recipient

    DEFF Research Database (Denmark)

    Montero, Nuria; Pérez-Sáez, María José; Pascual, Julio

    2016-01-01

    BACKGROUND: The Elderly are the fastest growing part of kidney transplant recipients. The best immunosuppressive strategy is unknown. METHODS: We performed a systematic search of randomized controlled trials and observational studies focused on safety and efficacy of different immunosuppression...... strategies in elderly kidney recipients. Data extraction and risk of bias evaluation were systematically performed. RESULTS: Ten studies were included: 2 randomized clinical trials and 8 observational. A marginal benefit was found for early renal function with delayed tacrolimus or complete tacrolimus...... receptor antibody induction, calcineurin-inhibitor minimization with MMF and steroid minimization is advisable in the low immunologic risk elderly recipient, considering the increased risk of toxicities, infection and malignancies. In the high immunologic risk elderly recipient, taking into account...

  18. DIFFUSION CAPACITY IN HEART-TRANSPLANT RECIPIENTS

    NARCIS (Netherlands)

    GROEN, HJM; BOGAARD, JM; BALK, AHMM; KHO, SG; HOP, WCJ; HILVERING, C

    Preoperative diffusion capacity per liter alveolar volume (Kco) in cardiac transplant recipients with an intrinsic normal lung is within the normal range. In the first postoperative year, Kco showed a significant mean decrease of 12 percent (p

  19. Interview with Abel Prize Recipient Lennart Carleson

    DEFF Research Database (Denmark)

    Raussen, Martin; Skau, Christian

    2008-01-01

    Lennart Carleson was the recipient of the 2006 Abel Prize. On May 22, 2006, prior to the Abel Prize celebration in Oslo, Carleson was interviewed. The interview was later shown on Norwegian television.......Lennart Carleson was the recipient of the 2006 Abel Prize. On May 22, 2006, prior to the Abel Prize celebration in Oslo, Carleson was interviewed. The interview was later shown on Norwegian television....

  20. Antibody induction therapy for lung transplant recipients

    DEFF Research Database (Denmark)

    Penninga, Luit; Møller, Christian H; Penninga, Ida Elisabeth Irene

    2013-01-01

    Lung transplantation has become a valuable and well-accepted treatment option for most end-stage lung diseases. Lung transplant recipients are at risk of transplanted organ rejection, and life-long immunosuppression is necessary. Clear evidence is essential to identify an optimal, safe...... and effective immunosuppressive treatment strategy for lung transplant recipients. Consensus has not yet been achieved concerning use of immunosuppressive antibodies against T-cells for induction following lung transplantation....

  1. DIETARY MANAGEMENT FOR DYSLIPIDEMIA IN LIVER TRANSPLANT RECIPIENTS.

    Science.gov (United States)

    Pinto, Andressa S; Chedid, Marcio F; Guerra, Léa T; Cabeleira, Daiane D; Kruel, Cleber D P

    2016-01-01

    Dyslipidemia occurs in approximately 70% of all liver transplant (LT) recipients, and no prior control studies have demonstrated any dietary intervention to change it. To analyze the effects of a dietary intervention on the lipid profile of dyslipidemic LT recipients. All LT recipients with dyslipidemia on clinical follow-up were enrolled. Anthropometric evaluation, food history, body composition (bioimpedance) and assessment of basal metabolism through indirect calorimetry were performed. Patients met with a dietitian and an individualized diet based on estimate of basal metabolism and consisting of 25% of the total energy value in total fat and basal metabolism through indirect calorimetry was able to manage dyslipidemia in most LT recipients; so, all dyslipidemic LT recipients must be enrolled on a dietary program. A dislipidemia ocorre em aproximadamente 70% de todos os pacientes transplantados de fígado em acompanhamento ambulatorial. Não há relato prévio de qualquer intervenção dietética que houvesse controlado a dislipidemia nesse grupo de pacientes. Analisar os efeitos de uma intervenção dietética no perfil lipídico de pacientes transplantados hepáticos dislipidêmicos em acompanhamento ambulatorial. Foram incluídos todos os pacientes adultos transplantados hepáticos com dislipidemia e em acompanhamento ambulatorial em nossa instituição. Avaliação antropométrica, anamnese alimentar, composição corporal (bioimpedância) e cálculo do metabolismo basal (calorimetria indireta) foram realizados. Pacientes foram atendidos por uma nutricionista e uma dieta individualizada baseada no metabolismo basal e consistindo de 25% do valor energético em gorduras totais e menos de 200 mg/dia de colesterol foi prescrita. Colesterol total (CT), HDL-colesterol (HDL), LDL-colesterol (LDL), triglicerídeos (TG) e medidas antropométricas foram medidos antes do início da dieta, sendo repetidos seis meses após o início da intervenção diet

  2. Molecular dynamics study on the effects of stamp shape, adhesive energy, and temperature on the nanoimprint lithography process

    International Nuclear Information System (INIS)

    Kang, Ji-Hoon; Kim, Kwang-Seop; Kim, Kyung-Woong

    2010-01-01

    Molecular dynamics simulations of nanoimprint lithography (NIL) were performed to investigate the effects of three critical process parameters in NIL: stamp shape, adhesive energy between the stamp and polymer film, and imprint temperature. The proposed simulation model of the NIL process consists of an amorphous SiO 2 stamp with a line pattern, an amorphous poly(methylmethacrylate) film, and a Si substrate under the periodic boundary condition in the horizontal direction to simulate a real NIL process imprinting periodical line patterns. The behavior of polymer deformation and the effects of adhesion on pattern transfer were investigated by observing the deformation process, calculating the imprint and separation forces, and analyzing the density and stress distribution inside the polymer film. In addition, their dependency on the process parameters is also discussed with reference to the changes in pattern shape, adhesive energy between the stamp and polymer atoms, and imprint temperature of the polymer film. During the imprint process, the rectangular pattern shows inferior cavity filling and higher stress concentration compared to trapezoidal and triangular patterns because it requires much larger flow and deformation of the polymer film. Low imprint temperature also produces high stress concentration and large imprint force due to the lower fluidity of polymer film. In the separation process, the rectangular pattern generates the largest separation force and causes the most serious defects of the transferred pattern and even the polymer film, while the triangular pattern shows the most satisfactory pattern transfer. In addition, the adhesive energy between the stamp and the polymer film also strongly influences the adhesion between the stamp and the polymer film. Low adhesive energy reduces the separation force of the stamp and transferred pattern defects, and therefore enhances the quality of pattern transfer.

  3. 29 CFR 35.21 - Recipient responsibility to provide notice.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Recipient responsibility to provide notice. 35.21 Section 35.21 Labor Office of the Secretary of Labor NONDISCRIMINATION ON THE BASIS OF AGE IN PROGRAMS OR....21 Recipient responsibility to provide notice. (a) Notice to other recipients. Where a recipient of...

  4. Declining Physics Enrollments: An Exploration of Reasons

    Science.gov (United States)

    Nelson, Miles A.; Dietrich, Donald G.

    1975-01-01

    Describes a detailed study used in schools with the highest and lowest percentages of students enrolled in physics in order to determine factors related to enrollment. Twenty-eight indexes were used. Reports percent of variance accounted for and significance level for each variable and offers conclusions. (CP)

  5. Methods and Techniques of Enrollment Forecasting.

    Science.gov (United States)

    Brinkman, Paul T.; McIntyre, Chuck

    1997-01-01

    There is no right way to forecast college enrollments; in many instances, it will be prudent to use both qualitative and quantitative methods. Methods chosen must be relevant to questions addressed, policies and decisions at stake, and time and talent required. While it is tempting to start quickly, enrollment forecasting is an area in which…

  6. Transforming the Enrollment Experience Using Design Thinking

    Science.gov (United States)

    Apel, Aaron; Hull, Phil; Owczarek, Scott; Singer, Wren

    2018-01-01

    In an effort to simplify the advising and registration process and provide students with a more intuitive enrollment experience, especially at orientation, the University of Wisconsin-Madison's Office of the Registrar and Office of Undergraduate Advising co-sponsored a project to transform the enrollment experience. Using design thinking has…

  7. 20 CFR 901.11 - Enrollment procedures.

    Science.gov (United States)

    2010-04-01

    ... Columbia responsible for the issuance of a license in the field of actuarial science, insurance, accounting... ACTUARIAL SERVICES UNDER THE EMPLOYEE RETIREMENT INCOME SECURITY ACT OF 1974 Enrollment of Actuaries § 901... enrollment to perform actuarial services under the Employee Retirement Income Security Act of 1974, each...

  8. Enrollment Forecasting in a Large State System

    Science.gov (United States)

    Render, Barry

    1977-01-01

    Using the Student Inventory File of the OBOR information system, detailed analyses were conducted on 1971-1975 enrollments in Ohio by institution, count, part-time versus full-time status, age, rank, day-evening, marital status, etc. Data on out-of-state enrollments, graduate students, and professional students were also tabulated. (LBH)

  9. Gender Preference in Primary School Enrolment among ...

    African Journals Online (AJOL)

    2017-05-01

    May 1, 2017 ... The benefits of equal enrolment and retention in primary schools cannot be underestimated for ... Gender Preference in Primary School Enrolment among Households in Northern Region, Ghana decisions ... is a major decision maker in issues of education (Akaguri, 2011; Al-Samarrai & Peasgood,. 1998).

  10. SINCERITIES: Inferring gene regulatory networks from time-stamped single cell transcriptional expression profiles.

    Science.gov (United States)

    Papili Gao, Nan; Ud-Dean, S M Minhaz; Gandrillon, Olivier; Gunawan, Rudiyanto

    2017-09-14

    Single cell transcriptional profiling opens up a new avenue in studying the functional role of cell-to-cell variability in physiological processes. The analysis of single cell expression profiles creates new challenges due to the distributive nature of the data and the stochastic dynamics of gene transcription process. The reconstruction of gene regulatory networks (GRNs) using single cell transcriptional profiles is particularly challenging, especially when directed gene-gene relationships are desired. We developed SINCERITIES (SINgle CEll Regularized Inference using TIme-stamped Expression profileS) for the inference of GRNs from single cell transcriptional profiles. We focused on time-stamped cross-sectional expression data, commonly generated from transcriptional profiling of single cells collected at multiple time points after cell stimulation. SINCERITIES recovers directed regulatory relationships among genes by employing regularized linear regression (ridge regression), using temporal changes in the distributions of gene expressions. Meanwhile, the modes of the gene regulations (activation and repression) come from partial correlation analyses between pairs of genes. We demonstrated the efficacy of SINCERITIES in inferring GRNs using in silico time-stamped single cell expression data and single cell transcriptional profiles of THP-1 monocytic human leukemia cells. The case studies showed that SINCERITIES could provide accurate GRN predictions, significantly better than other GRN inference algorithms such as TSNI, GENIE3 and JUMP3. Moreover, SINCERITIES has a low computational complexity and is amenable to problems of extremely large dimensionality. Finally, an application of SINCERITIES to single cell expression data of T2EC chicken erythrocytes pointed to BATF as a candidate novel regulator of erythroid development. The MATLAB and R version of SINCERITIES is freely available from the following websites: http://www.cabsel.ethz.ch/tools/sincerities.html and

  11. Studying the Solar System Can Be More Than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-04-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly could consist mostly of showing images and reporting facts, but by using observations that can be made from images and also data and other known facts about the objects, instruction on solar system topics can be more conceptual, involving just as much inquiry and discovery as any area of astronomy or physics.

  12. Analysis of the Phenomenon of Speculative Trading in One of its Basic Manifestations:. Postage Stamp Bubbles

    Science.gov (United States)

    Roehner, B.; Sornette, D.

    We document and analyze the empirical facts concerning one of the clearest evidence of speculation in financial trading as observed in the postage collection stamp market. We unravel some of the mechanisms of speculative behavior which emphasize the role of fancy and collective behavior. In our conclusion, we propose a classification of speculative markets based on two parameters, namely the amplitude of the price peak and a second parameter that measures its "sharpness". This study is offered to anchor modeling efforts to realistic market constraints and observations.

  13. Time stamp generation with inverse FIR filters for Positron Emission Tomography

    International Nuclear Information System (INIS)

    Namias, Mauro

    2009-01-01

    Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

  14. Use of atomic force microscopy in the forensic application of chronological order of toners and stamping inks in questioned documents.

    Science.gov (United States)

    Kang, Tae-Yi; Lee, Joong; Park, Byung-Wook

    2016-04-01

    This paper describes the application of the atomic force microscopy (AFM) as a nano-indentation method and introduces a new method of identifying the chronological order of the application of the toner and stamping ink on the surface of documents by removing either of them. Various toners were used as samples for the AFM nano-indentation method. The chronological order of the application of the toner and stamping ink with either the toner placed over the stamping ink or the stamping ink placed over the toner, could be identified, regardless of the kinds of toners made by various companies. This paper provides the new approach for physically removing the toner and checking the material below it to identify questioned documents, which allows the method to be used to appraise documents forensically. Blind testing has shown that the method to analyze the chronological order of toner-printed documents and the seal stamping on them could accurately identify the order in all samples, while minimizing damage to the samples. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  15. Does the Food Stamp Program cause obesity? A realist review and a call for place-based research.

    Science.gov (United States)

    DeBono, Nathaniel L; Ross, Nancy A; Berrang-Ford, Lea

    2012-07-01

    The high prevalence of obesity among low income groups has led some to question the role of food assistance programs in contributing to the problem. The USDA's Food Stamp Program (now known as the Supplemental Nutrition Assistance Program - SNAP) is the largest food assistance program in the United States with over 40 million participants. This paper employed systematic realist review methods to determine whether participation in the Food Stamp Program causes obesity and the causal pathways through which this relationship may exist. Findings indicate a more consistent positive relationship for women than for men, especially for women who are long term users of the program. All studies discussed the "food stamp cycle" and an "income effect" as explanations for the role of food stamps in increased obesity yet evidence for these factors is limited. Curiously, the research in this field does not address obesogenic environments and we suggest that the absence of an understanding of household behavior in local contexts is a significant impediment to the reform of the Food Stamp Program. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

    International Nuclear Information System (INIS)

    Park, Jongho; Kim, Beomjoon

    2016-01-01

    Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

  17. 2013 Annual Survey of Journalism Mass Communication Enrollments: Enrollments Decline for Third Consecutive Year

    Science.gov (United States)

    Becker, Lee Bernard; Vlad, Tudor; Simpson, Holly Anne

    2014-01-01

    Enrollments in journalism and mass communication programs in the United States in the fall of 2013 were down from a year earlier for the third year in a row. Enrollments dropped at the bachelor's, master's, and doctoral levels, and the number of freshmen and sophomores were down dramatically from a year earlier. Enrollments in the…

  18. SERUM PARAOXONASE ACTIVITY IN RENAL TRANSPLANT RECIPIENTS

    Directory of Open Access Journals (Sweden)

    Saritha Gadicherla

    2017-12-01

    Full Text Available BACKGROUND Serum paraoxonase is an enzyme synthesised in the liver. It is known to prevent atherosclerosis by inhibiting oxidation of lowdensity lipoprotein. Renal transplant recipients have increased tendency for developing atherosclerosis and cardiovascular disease. Reduced activity of serum paraoxonase contributes to accelerated atherosclerosis and increased cardiovascular complications in these patients. The aim of this study was to estimate serum paraoxonase activity in renal transplant recipients and compare it with healthy controls. MATERIALS AND METHODS 30 renal transplant recipients and 30 age and sex matched healthy controls were taken for the study. Serum paraoxonase activity, blood urea, serum creatinine and uric acid were estimated in these groups. The serum paraoxonase activity was correlated with urea, creatinine and uric acid levels. RESULTS Serum paraoxonase activity was reduced in renal transplant recipients compared to healthy controls. There was a negative correlation between paraoxonase activity and the levels of urea, creatinine and uric acid levels. CONCLUSION In this study, the paraoxonase activity was reduced in renal transplant recipients compared to controls. The increased cardiovascular disease in these patients could be due to reduced paraoxonase activity.

  19. The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

    Directory of Open Access Journals (Sweden)

    Kaadyr-ool A. Bicheldey

    2016-09-01

    Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

  20. Urinary tract infection in kidney transplant recipients.

    Science.gov (United States)

    Chacón-Mora, Natalia; Pachón Díaz, Jerónimo; Cordero Matía, Elisa

    2017-04-01

    Infectious complications remain a major cause of morbidity and mortality among transplant recipients. Urinary tract infection (UTI) is the most common infectious complication in kidney transplant recipients with a reported incidence from 25% to 75%, varies widely likely due to differences in definition, diagnostic criteria, study design, and length of observation. We sought reviews the incidence and importance of urinary tract infection on graft survival, the microbiology with special emphasis on multidrug resistant microorganisms, the therapeutic management of UTI and the prophylaxis of recurrent UTI among solid organ transplant recipients, highlighting the need for prospective clinical trials to unify the clinical management in this population. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  1. Medicaid Enrollment Data Collected through MBES

    Data.gov (United States)

    U.S. Department of Health & Human Services — For the quarter beginning with January 1, 2014, states began reporting Medicaid enrollment data as part of their Medicaid expenditure reporting through the Medicaid...

  2. Pittsburgh American Community Survey 2015, School Enrollment

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — School enrollment data are used to assess the socioeconomic condition of school-age children. Government agencies also require these data for funding allocations...

  3. Private schools and school enrollment in Chicago

    OpenAIRE

    William Sander

    2006-01-01

    Does enrollment in private school increase educational attainment? After reviewing some research on national trends concerning private (versus public) schooling, the author examines how private school options in the Chicago metropolitan area might affect academic achievement for various demographic groups.

  4. New method for springback compensation for the stamping of sheet metal components

    Science.gov (United States)

    Birkert, A.; Hartmann, B.; Straub, M.

    2017-09-01

    The need for car body structures of higher strength and at the same time lower weight results in serious challenges for the stamping process. Especially the use of high strength steel and aluminium sheets is causing growing problems with regard to elastic springback. To produce accurate parts the stamping dies must be adjusted more or less by the amount of the springback in the opposite direction. For this purpose well-known software solutions use the Displacement Adjustment Method or algorithms which are closely based on that method. A crucial issue of this method is that the generated die surfaces deviate from those of the target geometry with regard to surface area. A new Physical Compensation Method has been developed and validated which takes geometrical nonlinearity into account and creates compensated die geometries with equal-in-area die surfaces. In contrast to the standard mathematical/geometrical approach, the adjusted geometry is generated by a physical approach, which makes use of the virtual part stiffness. Hereby the target geometry is being deformed mechanically in a virtual process based on the springback simulation results by applying virtual forces in an additional elastic simulation. By doing so better part dimensions can be obtained in less tool optimization loops.

  5. A Material Perspective on Consequence of Deformation Heating During Stamping of DP Steels

    Science.gov (United States)

    Şimşir, C.; Çetin, B.; Efe, M.; Davut, K.; Bayramin, B.

    2017-09-01

    Recent studies showed that, during stamping of high strength steels at industrially relevant production rates, local temperature in the blank may rise up to 200°C - 300°C due to deformation heating. Moreover, die temperature may also rise up to 100°C - 150°C for progressive stamping dies. Based on the common assumption that the blank softens as the temperature increases, thermal softening creates a margin in Forming Limit Diagram (FLD) and therefore the FLD determined at room temperature can safely be used for those cases. In this article, the validity of this assumption on DP590 steel is questioned by high temperature tensile tests (RT - 300°C) at various strain rates (10-3 s-1 - 1 s-1). The results indicated a decrease both in uniform and total elongation in 200°C - 300°C range together with several other symptoms of Dynamic Strain Aging (DSA) at all strain rates. Concurrent with the DSA, the simulated FLD confirms the lower formability at high temperature and strain rates. Thus, it is concluded FLD determined at RT may not be valid for the investigated steels.

  6. Predication of coke strength from textural analysis of stamp charged coke supported by coal petrography

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, R.; Dash, P.S.; Chakraborty, D.; Banerjee, P.K.; Kumar, D. [Tata Steel, Jamshedpur (India)

    2005-07-01

    Materials science tells us that defects or flaws in a solid material control the mechanical behaviour of that material. Similarly, in a coke, its strength is associated with the microstructure and texture. Optical microscopy is the most appropriate method for measuring these features. Attempts were made to correlate different types of textures with the strength of stamp charged coke at Tata Steel. The studies revealed that anisotropic carbon is less reactive to carbon dioxide compared to isotropic carbon. There may be two reasons for this: a lower surface area of the carbon available for reaction; the intrinsic reactivity may be lower for molecules which constitute anisotropic carbon. The strength after reaction depends on its anisotropic texture - the smaller size mosaic texture contributes to higher post strength. There are very few reports about use of micro textural analysis to predict cold strength of coke. Test results show that there exists an influence of isotropic carbon on M{sub 10} index. With an increase in isotropic texture, the M{sub 10} index deteriorates. The performance of coke in blast furnaces may be improved by improving room temperature and high temperature strength of coke by selecting coal with higher vitrinite distribution in the present blend through the stamp charging route. 18 refs., 12 figs., 3 tabs.

  7. Virtual method for the determination of an optimum thermal design of hot stamping tools

    Science.gov (United States)

    Weiß, W.; Koplenig, M.; Alb, M.; Graf, J.

    2016-11-01

    This work presents a new virtual method for the optimised thermal design of hot stamping tools. It provides optimal positions of the tool's tempering ducts with respect to the average working temperature and its homogeneous distribution on the surface of a tool. It consists of a specific procedure for hot stamping tool design and a software framework in order to interconnect three domains: (I) a parametrised CAD tool model, (II) a linear thermal solver using a fast boundary element method and (III) an optimisation algorithm. This enables the automated set-up, simulation and optimisation of a duct topology. The boundary conditions for the simulations are derived from a reduced model of the thermal loading of the tool. The virtual method proposed is demonstrated on simplified tool segment geometries. The results are transferred to complex tool designs used in industry. For a selected use case, the number of ducts could be reduced by 50% through the application of the proposed method. These results are validated virtually based on an existing design. Hence, the new virtual method contributes to a CAE-driven tool design and a more efficient tool manufacturing.

  8. Renal cancer in recipients of kidney transplant

    Directory of Open Access Journals (Sweden)

    Prajwal Dhakal

    2017-03-01

    Full Text Available The aim of our study is to determine characteristics and outcomes of kidney cancer in renal transplant recipients. MEDLINE ® database was searched in June 2015 to identify cases of kidney cancer in renal transplant recipients. We include also a new case. Descriptive statistics were used for analysis. Forty-eight (48 recipients reported in 25 papers met the eligibility criteria. The median age was 47 years (range 9-66; 27% were females. Chronic glomerulonephritis, cystic kidney disease and hypertension were common indications for renal transplant. Among donors 24% were females and the median age was 52.5 years (17- 73; 62% of kidney cancers were donor-derived. The median interval between transplant and cancer diagnosis was shorter for cancer of recipient versus donor origin (150 vs. 210 days. Clear cell carcinoma was diagnosed in 17%. 25% had metastasis at diagnosis. Kidney explantation or excision was done in 90% and 84% of cases with and without metastasis respectively. The median survival was 72 months. Actuarial 1-year and 5-year survival rates were 73.4% and 55.1% respectively. Among the recipients from 7 donors who subsequently developed malignancy, 57% were dead within a year. Kidney transplant recipients have a small risk of kidney cancer, which affects younger patients and occurs within a year of transplant, likely due to immunosuppression. Whether the use of older donors may increase the likelihood needs further investigation. The presence of metastasis, explantation or excision of affected kidney and development of cancer in donors predict outcomes. The results may guide patient education and informed decision-making.

  9. Studies on the finite element simulation in sheet metal stamping processes

    Science.gov (United States)

    Huang, Ying

    The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

  10. Medical School Performance, Alumni Membership, and Giving: How Do Scholarship Recipients and Non-Recipients Differ?

    Science.gov (United States)

    Elam, Carol L; Stratton, Terry D; Gilbert, Linda A; Stroth, H I; Vicini, Mary Beth; Wilson, Emery A

    2005-12-01

    This study examines student recipients of merit, need-based, service, or minority scholarships, their performance in medical school, and the relationship to future alumni association membership and financial giving. Retrospective data on grade-point average attained across the four-year curriculum and extracurricular activities reported at graduation were collected on students at the University of Kentucky College of Medicine from 1981-1991. Comparisons of academic performance and participation in institutional activities were made across scholarship recipients and non-recipients. These data were then linked to other data tracking alumni association membership and institutional giving. Compared to other scholarship recipients and non-recipients, merit scholars were more likely to be ranked above their class medians and be involved in extracurricular activities, including membership in Alpha Omega Alpha. However, seven years post-graduation, there was no difference between scholarship recipients and non-recipients in alumni association membership or donations to the medical school. Instead, students graduating in the upper half of their class, as compared to graduates in the lower half, and UKCOM graduates who attended the University of Kentucky as undergraduates, rather than students who attended other in-state or out-of state institutions, were more likely to join the medical alumni association. Alumni association members were more likely than non-members to make donations to the institution. More should be done to ensure that graduates who received scholarships are afforded meaningful ways to give back to the institution that supported them as students.

  11. Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

    Science.gov (United States)

    Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

    2002-01-01

    The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

  12. Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

    International Nuclear Information System (INIS)

    Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

    2014-01-01

    With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

  13. SERUM PARAOXONASE ACTIVITY IN RENAL TRANSPLANT RECIPIENTS

    OpenAIRE

    Saritha Gadicherla; Suma M. N; Parveen Doddamani

    2017-01-01

    BACKGROUND Serum paraoxonase is an enzyme synthesised in the liver. It is known to prevent atherosclerosis by inhibiting oxidation of lowdensity lipoprotein. Renal transplant recipients have increased tendency for developing atherosclerosis and cardiovascular disease. Reduced activity of serum paraoxonase contributes to accelerated atherosclerosis and increased cardiovascular complications in these patients. The aim of this study was to estimate serum paraoxonase activity in re...

  14. Kaposi's sarcoma in renal transplant recipients

    African Journals Online (AJOL)

    The cause of the increased frequency of KS among renal transplant recipients is multifactorial: (l) genetic predisposition, i.e. increased incidence of specific lll.A types; (il) chronic immunostimulation in the presence of. T-cell dysfunction; (iil) proliferation of suppressor cells with the production of specific growth factors; and (iv).

  15. Interview with Abel Prize Recipient Lennart Carleson

    DEFF Research Database (Denmark)

    Raussen, Martin; Skau, Christian

    2007-01-01

    Lennart Carleson is the recipient of the 2006 Abel Prize of the Norwegian Academy of Science and Letters. On May 22, 2006, prior to the Abel Prize celebration i Oslo, Carleson was interviewed by Martin Raussen of Aalborg University and Christian Skau of the Norwegian University of Science...

  16. Medal of Honor Recipients: 1979-2004

    National Research Council Canada - National Science Library

    Richardson, Glenda

    2004-01-01

    .... Although the Persian Gulf War, Operation Enduring Freedom, and Operation Iraqi Freedom are listed in the Table of Contents, as of this writing, no Medals of Honor have been awarded for actions in these conflicts. For further information, see CRS Report 95-519, "Medal of Honor: History and Issues." This report will be updated as new recipients are named.

  17. 1987 NRSSC Exemplary Program Awards Recipients.

    Science.gov (United States)

    Journal of Rural and Small Schools, 1987

    1987-01-01

    Identifies ten recipients of exemplary program awards and describes each program. Award categories include educational technology, cross-cultural services, preserve/inservice training, special education, family/school/community partnerships, innovative and creative programs, secondary curriculum and instruction, at-risk services, elementary…

  18. 14 CFR 1267.660 - Recipient.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Recipient. 1267.660 Section 1267.660 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE..., corporation, partnership, association, unit of government (except a Federal agency) or legal entity, however...

  19. Urinary tract infection in renal transplant recipients

    African Journals Online (AJOL)

    Abstract. Introduction: Urinary tract infection (UTI) is the commonest bacterial infection occurring in renal transplant recipients, and it is associated with significant morbidity. This study aimed to assess the characteristics of all UTI episodes diagnosed in renal transplant patients who attended regularly for follow up in the ...

  20. 76 FR 19683 - Conservation Program Recipient Reporting

    Science.gov (United States)

    2011-04-08

    ... regulations require agencies that make awards of Federal financial assistance subject to the Transparency Act... registration and reporting requirements into these programs' regulations. These changes, the terms of which are..., 2010. The regulations at 2 CFR part 25 require, with some exceptions, recipients of Federal financial...

  1. Hyperthyroidism in a renal transplant recipient.

    Science.gov (United States)

    Peces, R; Navascués, R A; Baltar, J; Laurés, A S; Ortega, F; Alvarez-Grande, J

    1998-01-01

    We report a case of toxic multinodular goiter with severe symptomatic hyperthyroidism in a female diagnosed 5 months after successful renal transplantation. To our knowledge, this is the first well-documented case of hyperthyroidism in a renal transplant recipient that responded well to methimazole. Special attention should be made to the use of methimazole and the possible interaction with immunosuppressive drugs.

  2. 40 CFR 35.6285 - Recipient payment of response costs.

    Science.gov (United States)

    2010-07-01

    ... ASSISTANCE STATE AND LOCAL ASSISTANCE Cooperative Agreements and Superfund State Contracts for Superfund Response Actions Financial Administration Requirements Under A Cooperative Agreement § 35.6285 Recipient... cost share requirements under Cooperative Agreements. The recipient must comply with the requirements...

  3. Modeling and simulation of stamp deflections in nanoimprint lithography: Exploiting backside grooves to enhance residual layer thickness uniformity

    DEFF Research Database (Denmark)

    Taylor, Hayden; Smistrup, Kristian; Boning, Duane

    2011-01-01

    We describe a model for the compliance of a nanoimprint stamp etched with a grid of backside grooves. We integrate the model with a fast simulation technique that we have previously demonstrated, to show how etched grooves help reduce the systematic residual layer thickness (RLT) variations...

  4. 75 FR 52981 - Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-08-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Wackenhut Security, CR Associates, and Syncreon, Twinsburg, OH; Amended Certification Regarding...

  5. 75 FR 11913 - Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Sterling Heights, MI; Amended Certification Regarding Eligibility To Apply for Worker Adjustment...

  6. The new Swiss commemorative stamp dedicated to CERN available at the Organization's Meyrin post office on Tuesday, 9 March!

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For some people, the stamp's rays are spreading outwards towards the infinitely large, while for others they focus inwards towards the infinitely small. It's a bit like the proverbial half-full or half-empty glass or a picture that conveys two different images, depending on how you look at it.

  7. Forming of an axially tailored automotive channel section through hot stamping of tailor-welded blanks

    Science.gov (United States)

    Peister, C.; George, R.; Omer, K.; Worswick, M. J.; Malcolm, S.; Dykeman, J.; Yau, C.; Soldaat, R.; Bernert, W.

    2017-09-01

    In this work, top-hat cross-section axial crush rail specimens with tailored properties along their length were investigated. These top-hat channels were hot stamped in a fully cooled die set from tailor-welded blanks (TWBs). The blanks were laser-welded and comprised Usibor® 1500-AS joined to Ductibor® 500-AS in 1.2 mm and 1.6 mm thicknesses. Micro-hardness measurements were taken along the length of the formed specimens to map the hardness profile along their length. The effect of gauge thickness on hardness was evaluated. The hardness profile of these TWB parts was compared to that of parts formed using tailored in-die heating (IDH).

  8. Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone

    Energy Technology Data Exchange (ETDEWEB)

    Cannell, Gary L. [Fluor Enterprises, Inc.; Huth, Ralph J. [CH2MHill Plateau Remediation Company; Hallum, Randall T. [Fluor Government Group

    2013-08-26

    In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work in a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.

  9. Scandiatransplant acceptable mismatch program (STAMP) a bridge to transplanting highly immunized patients

    DEFF Research Database (Denmark)

    Koefoed-Nielsen, Pernille; Weinreich, I; Bengtsson, M

    2017-01-01

    BACKGROUND: Highly immunized patients are a challenge for organ transplantation programs. One way of increasing the likelihood of transplantation in this group of patients is to expand the possible donations by defining acceptable HLA mismatches. In the Scandiatransplant Acceptable Mismatch Program...... (STAMP), a de-centralized approach has been implemented in 2009. AIMS: The program has been improved during the years from utilizing HLA-A, -B, -DR matching only to include typing of all deceased donors for HLA-A, -B, -C, -DRB1 and -DQB1. The calculation of a transplantability score (TS) has been...... introduced in order to take both HLA and AB0 into consideration resulting in a more realistic picture of the transplantability chance. MATERIALS AND METHODS: Patients were selected for eligibility and results of immunisation status were prepared in each of the 9 tissue typing laboratories, while access...

  10. Construction of Time-Stamped Mobility Map for Path Tracking via Smith-Waterman Measurement Matching

    Directory of Open Access Journals (Sweden)

    Mu Zhou

    2014-01-01

    Full Text Available Path tracking in wireless and mobile environments is a fundamental technology for ubiquitous location-based services (LBSs. In particular, it is very challenging to develop highly accurate and cost-efficient tracking systems applied to the anonymous areas where the floor plans are not available for security and privacy reasons. This paper proposes a novel path tracking approach for large Wi-Fi areas based on the time-stamped unlabeled mobility map which is constructed from Smith-Waterman received signal strength (RSS measurement matching. Instead of conventional location fingerprinting, we construct mobility map with the technique of dimension reduction from the raw measurement space into a low-dimensional embedded manifold. The feasibility of our proposed approach is verified by the real-world experiments in the HKUST campus Wi-Fi networks, sMobileNet. The experimental results prove that our approach is adaptive and capable of achieving an adequate precision level in path tracking.

  11. SOCIAL RESPONSIBILITY SCORE: COMPARATIVE STUDY BETWEEN PUBLIC And PRIVATE COMPANIES, BASED In ibase SOCIAL stamp

    Directory of Open Access Journals (Sweden)

    Alexandre Reis

    2008-01-01

    Full Text Available The present article intends to arguing the existing differences and similarities between Social Responsibility actions and praticals developed by the private and public companies. This comparative study of exploring character was carried with the companies owners of Social Stamp IBASE, wich published its Social Balances in the model considered for the institute in the year of 2004. For such, beyond the documentary research involving the published balances, a conceptual revision over the main subjects was necessary and also it constitutes part of the study. The joined results supply measurable and representative information about the main characteristics of social action of the companies, propitiating a comparative analysis and the emission of critical considerations, that do not finish themselves, but establishes a possibility of different readings concerning the models of social responsible management undertaken by companies from public and private segments.

  12. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Science.gov (United States)

    Jelovica Badovinac, I.; Orlić, N.; Lofrumento, C.; Dobrinić, J.; Orlić, M.

    2010-07-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  13. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Energy Technology Data Exchange (ETDEWEB)

    Jelovica Badovinac, I., E-mail: ijelov@phy.uniri.h [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Orlic, N. [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Lofrumento, C. [Dipartimento di Chimica, Universita di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Dobrinic, J. [Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka (Croatia); Orlic, M. [Department of Civil Engineering, Polytechnic of Zagreb, Av. V. Holjevca 15, 10000 Zagreb (Croatia)

    2010-07-21

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  14. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    International Nuclear Information System (INIS)

    Jelovica Badovinac, I.; Orlic, N.; Lofrumento, C.; Dobrinic, J.; Orlic, M.

    2010-01-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  15. Finite element analysis and optimization of process parameters during stamp forming of composite materials

    International Nuclear Information System (INIS)

    Venkatesan, S; Kalyanasundaram, S

    2010-01-01

    In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

  16. Determination of stamp deformation during imprinting on semi-spherical surfaces

    DEFF Research Database (Denmark)

    Kafka, Jan; Matschuk, Maria; Pranov, Henrik

    of sol-gel was applied onto spherical injection mold inserts and subsequently imprinted using a flexible stamp. A hard curing step transformed the sol-gel into a quartz-like and durable material. As an example, we present theory and results regarding the imprint of pillar nanostructures on semi......-spherical mold surfaces. Imprints were realized on three different radii of circumferenceof the spherical mold: R = 0.5 mm, R = 1.0 mm, and R = 2 mm. After hard-curing of theimprinted sol-gel, the inserts were used for cold-mold as well as vario-therm injection molding.The polymer replicas and the inserts were...

  17. Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services

    Science.gov (United States)

    Coïsson, Pierdavide; Telali, Kader; Heumez, Benoit; Lesur, Vincent; Lalanne, Xavier; Jiang Xin, Chang

    2017-09-01

    During magnetic observatory data acquisition, the data time stamp is kept synchronized with a precise source of time. This is usually done using a GPS-controlled pulse per second (PPS) signal. For some observatories located in remote areas or where internet restrictions are enforced, only the magnetometer data are transmitted, limiting the capabilities of monitoring the acquisition operations. The magnetic observatory in Lanzhou (LZH), China, experienced an unnoticed interruption of the GPS PPS starting 7 March 2013. The data logger clock drifted slowly in time: in 6 months a lag of 27 s was accumulated. After a reboot on 2 April 2014 the drift became faster, -2 s per day, before the GPS PPS could be restored on 8 July 2014. To estimate the time lags that LZH time series had accumulated, we compared it with data from other observatories located in East Asia. A synchronization algorithm was developed. Natural sources providing synchronous events could be used as markers to obtain the time lag between the observatories. The analysis of slices of 1 h of 1 s data at arbitrary UTC allowed estimating time lags with an uncertainty of ˜ 11 s, revealing the correct trends of LZH time drift. A precise estimation of the time lag was obtained by comparing data from co-located instruments controlled by an independent PPS. In this case, it was possible to take advantage of spikes and local noise that constituted precise time markers. It was therefore possible to determine a correction to apply to LZH time stamps to correct the data files and produce reliable 1 min averaged definitive magnetic data.

  18. Framework for simulation-driven design of stamping dies considering elastic die and press deformations

    Science.gov (United States)

    Pilthammar, Johan; Wall, Johan; Sigvant, Mats

    2017-10-01

    Sheet metal forming (SMF) simulations are used extensively throughout the development phase of industrial stamping dies. In these SMF simulations, the die and press are normally considered as rigid. Previous research has however shown that elastic deformation in these parts has a significant negative impact on process performance. This paper demonstrates methods for counteracting these negative effects, with a high potential for improved production support and a reduced lead time through a shorter try-out process. A structural finite element model (FE-model) of a simplified die is studied. To account for elastic deformation, the blankholder surfaces are first virtually reworked by adjusting the nodal positions on the die surfaces attaining a pressure distribution in accordance to the design phase SMF simulations with rigid surfaces. The elastic FE-model with reworked surfaces then represents a stamping die in running production. The die is now assumed to be exposed to changed process conditions giving an undesired blankholder pressure distribution. The changed process conditions could for example be due to a change of press line. An optimization routine is applied to compensate the negative effects of the new process conditions. The optimization routine uses the contact forces acting on the shims of the spacer blocks and cushion pins as optimization variables. A flexible simulation environment using MATLAB and ABAQUS is used. ABAQUS is executed from MATLAB and the results are automatically read back into MATLAB. The suggested optimization procedure reaches a pressure distribution very similar to the initial distribution assumed to be the optimum, and thereby verifying the method. Further research is needed for a method to transform the calculated forces in the optimization routine back to shims thicknesses. Furthermore, the optimization time is relatively long and needs to be reduced in the future for the method to reach its full potential.

  19. Recognition of Time Stamps on Full-Disk Hα Images Using Machine Learning Methods

    Science.gov (United States)

    Xu, Y.; Huang, N.; Jing, J.; Liu, C.; Wang, H.; Fu, G.

    2016-12-01

    Observation and understanding of the physics of the 11-year solar activity cycle and 22-year magnetic cycle are among the most important research topics in solar physics. The solar cycle is responsible for magnetic field and particle fluctuation in the near-earth environment that have been found increasingly important in affecting the living of human beings in the modern era. A systematic study of large-scale solar activities, as made possible by our rich data archive, will further help us to understand the global-scale magnetic fields that are closely related to solar cycles. The long-time-span data archive includes both full-disk and high-resolution Hα images. Prior to the widely use of CCD cameras in 1990s, 35-mm films were the major media to store images. The research group at NJIT recently finished the digitization of film data obtained by the National Solar Observatory (NSO) and Big Bear Solar Observatory (BBSO) covering the period of 1953 to 2000. The total volume of data exceeds 60 TB. To make this huge database scientific valuable, some processing and calibration are required. One of the most important steps is to read the time stamps on all of the 14 million images, which is almost impossible to be done manually. We implemented three different methods to recognize the time stamps automatically, including Optical Character Recognition (OCR), Classification Tree and TensorFlow. The latter two are known as machine learning algorithms which are very popular now a day in pattern recognition area. We will present some sample images and the results of clock recognition from all three methods.

  20. 45 CFR 1612.11 - Recipient policies and procedures.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies and procedures. 1612.11 Section... RESTRICTIONS ON LOBBYING AND CERTAIN OTHER ACTIVITIES § 1612.11 Recipient policies and procedures. Each recipient shall adopt written policies and procedures to guide its staff in complying with this part. ...

  1. 45 CFR 1636.5 - Recipient policies, procedures and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies, procedures and recordkeeping... CORPORATION CLIENT IDENTITY AND STATEMENT OF FACTS § 1636.5 Recipient policies, procedures and recordkeeping. Each recipient shall adopt written policies and procedures to guide its staff in complying with this...

  2. 45 CFR 1609.6 - Recipient policies, procedures and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies, procedures and recordkeeping... CORPORATION FEE-GENERATING CASES § 1609.6 Recipient policies, procedures and recordkeeping. Each recipient shall adopt written policies and procedures to guide its staff in complying with this part and shall...

  3. 45 CFR 1637.5 - Recipient policies, procedures and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies, procedures and recordkeeping... CORPORATION REPRESENTATION OF PRISONERS § 1637.5 Recipient policies, procedures and recordkeeping. Each recipient shall adopt written policies and procedures to guide its staff in complying with this part and...

  4. 45 CFR 1639.6 - Recipient policies and procedures.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies and procedures. 1639.6 Section... WELFARE REFORM § 1639.6 Recipient policies and procedures. Each recipient shall adopt written policies and procedures to guide its staff in complying with this part. ...

  5. 45 CFR 1627.8 - Recipient policies, procedures and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies, procedures and recordkeeping... CORPORATION SUBGRANTS AND MEMBERSHIP FEES OR DUES § 1627.8 Recipient policies, procedures and recordkeeping. Each recipient shall adopt written policies and procedures to guide its staff in complying with this...

  6. 45 CFR 1633.4 - Recipient policies, procedures and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies, procedures and recordkeeping... CORPORATION RESTRICTION ON REPRESENTATION IN CERTAIN EVICTION PROCEEDINGS § 1633.4 Recipient policies, procedures and recordkeeping. Each recipient shall adopt written policies and procedures to guide its staff...

  7. 45 CFR 1644.5 - Recipient policies and procedures.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies and procedures. 1644.5 Section... DISCLOSURE OF CASE INFORMATION § 1644.5 Recipient policies and procedures. Each recipient shall adopt written policies and procedures to implement the requirements of this part. ...

  8. 45 CFR 1626.12 - Recipient policies, procedures and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies, procedures and recordkeeping... SERVICES CORPORATION RESTRICTIONS ON LEGAL ASSISTANCE TO ALIENS § 1626.12 Recipient policies, procedures and recordkeeping. Each recipient shall adopt written policies and procedures to guide its staff in...

  9. 45 CFR 1617.4 - Recipient policies and procedures.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies and procedures. 1617.4 Section... CLASS ACTIONS § 1617.4 Recipient policies and procedures. Each recipient shall adopt written policies and procedures to guide its staff in complying with this part. ...

  10. 14 CFR 1274.933 - Summary of recipient reporting responsibilities.

    Science.gov (United States)

    2010-01-01

    ....913 Patent Rights—Retention by the Recipient (Small Business)(Paragraph (h)) Notice of Proposed... Reportable Items Every 12 months 1274.912 Patent Rights—Retention by the Recipient (Large Business)(Paragraph...—Retention by the Recipient (Large Business) (Paragraph (e)(3)(ii)) Disclosure of Subject Inventions Within 2...

  11. Disseminated Fusarium infection in autologous stem cell transplant recipient

    OpenAIRE

    Avelino-Silva, Vivian Iida; Ramos, Jessica Fernandes; Leal, Fabio Eudes; Testagrossa, Leonardo; Novis, Yana Sarkis

    2015-01-01

    Disseminated infection by Fusarium is a rare, frequently lethal condition in severely immunocompromised patients, including bone marrow transplant recipients. However, autologous bone marrow transplant recipients are not expected to be at high risk to develop fusariosis. We report a rare case of lethal disseminated Fusarium infection in an autologous bone marrow transplant recipient during pre-engraftment phase.

  12. Disseminated Fusarium infection in autologous stem cell transplant recipient

    Directory of Open Access Journals (Sweden)

    Vivian Iida Avelino-Silva

    2015-01-01

    Full Text Available Disseminated infection by Fusarium is a rare, frequently lethal condition in severely immunocompromised patients, including bone marrow transplant recipients. However, autologous bone marrow transplant recipients are not expected to be at high risk to develop fusariosis. We report a rare case of lethal disseminated Fusarium infection in an autologous bone marrow transplant recipient during pre-engraftment phase.

  13. 45 CFR 1603.10 - Multi-state recipients.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Multi-state recipients. 1603.10 Section 1603.10 Public Welfare Regulations Relating to Public Welfare (Continued) LEGAL SERVICES CORPORATION STATE ADVISORY COUNCILS § 1603.10 Multi-state recipients. Where a recipient has offices in more than one State...

  14. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    International Nuclear Information System (INIS)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-01-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

  15. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Energy Technology Data Exchange (ETDEWEB)

    Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

  16. Astronomy Enrollments and Degrees: Results from the 2012 Survey of Astronomy Enrollments and Degrees. Focus On

    Science.gov (United States)

    Mulvey, Patrick; Nicholson, Starr

    2014-01-01

    Interest in astronomy degrees in the U.S. remains strong, with astronomy enrollments at or near all-time highs for the 2012-13 academic year. The total number of students taking an introductory astronomy course at a degree-granting physics or astronomy department is approaching 200,000. Enrollments in introductory astronomy courses have been…

  17. Enrollment Management Strategies at Four-Year Open Enrollment Institutions of Higher Education

    Science.gov (United States)

    Santoro, Dana S.

    2017-01-01

    Enrollment management plans have been researched and documented for the last fifty years and literature verifies that the use of these plans has only become more relevant in the 21st century. Strategies and activities for managing enrollment have been defined and shared for most types of institutions, however, there is limited research on the best…

  18. Declining Enrollments of Sociology Majors: Department Responses.

    Science.gov (United States)

    Fabianic, David

    1991-01-01

    Discusses the falling enrollments in sociology departments. Suggests that the decline may be a result of quality of subject matter presentation, an increase in career-oriented students, and the development of social work and criminal justice into departments separate from sociology. Urges sociology departments to strengthen their political…

  19. Managing Educational Facilities and Students' Enrolment in ...

    African Journals Online (AJOL)

    DR Nneka

    Coefficient and Multiple Regression were used to analyses the stated Hypotheses at. 0.05 level of Significance. ... A positive school environment creates an optimal setting high enrolment. The school is a stabilizing ... universities in order to reduce the high cost of replacement that often result from total breakdown of School ...

  20. COLLEGE CLASSICAL ENROLLMENTS, 1965-66.

    Science.gov (United States)

    LIEBERMAN, SAMUEL

    THE MODERN LANGUAGE ASSOCIATION (MLA) STATISTICAL SURVEY AVAILABLE IN MARCH 1966 CORROBORATED PREVIOUS, LESS EXTENSIVE, STUDIES SPONSORED BY "THE CLASSICAL WORLD," AND SHOWED THAT ENROLLMENTS IN LATIN AND GREEK HAVE GROWN SLOWLY BUT RESPECTABLY, AND THAT ALTHOUGH A NUMBER OF COLLEGES DO NOT OFFER CLASSICAL LANGUAGES, MANY DO NOT PROVIDE…

  1. TRENDS IN ENGINEERING TECHNICIAN ENROLLMENTS AND GRADUATES.

    Science.gov (United States)

    ALDEN, JOHN D.

    TECHNICIAN ENROLLMENTS AND GRADUATES WERE SURVEYED (1965-66) IN FIVE CLASSIFICATIONS WITH VARYING EDUCATIONAL REQUIREMENTS--(1) ENGINEERING TECHNICIAN, (2) PHYSICIAL SCIENCE TECHNICIAN, (3) INDUSTRIAL TECHNICIAN, (4) PRE-ENGINEERING TRANSFER, AND (5) BACHELOR OF TECHNOLOGY. THE DATA WERE USED TO DETERMINE PRESENT TRENDS IN MANPOWER TRAINING AND…

  2. Engineering and Technician Enrollments--Fall 1969.

    Science.gov (United States)

    Engineers Joint Council, New York, NY. Engineering Manpower Commission.

    Engineering and technician enrollments for Fall 1969 are reported for associate and bachelor's degree programs in engineering technology and industrial technology, and for engineering degrees at the bachelor's, master's, and doctor's levels. Statistical tables were produced by a computer analysis of data from 269 engineering schools and 558 other…

  3. Business Cycles and Postsecondary School Enrollment

    Science.gov (United States)

    Samitamana, Ravi

    2009-01-01

    Human capital theory suggests that the opportunity cost is lower during an economic recession which in turn encourages a person to enroll in a postsecondary educational institution. At the same time, the ability to pay the direct costs of education is reduced. The two effects work in an opposite direction. Using unemployment rates as a business…

  4. 7 CFR 1467.7 - Enrollment process.

    Science.gov (United States)

    2010-01-01

    ... landowner. (c) Acceptance and effect of offer of enrollment.(1) Easement. For applications requesting... acceptance into the program. (b) Effect of notice of tentative selection. The notice of tentative acceptance...) Recording the easement in accordance with applicable State law; and (iv) Ensuring the title to the easement...

  5. Predicting Succession under Conditions of Enrollment Decline.

    Science.gov (United States)

    Berger, Michael A.

    Three possible explanations for superintendent succession focus on poor administrative performance, district response strategies, and the politics of the chief executive's relationship with the school board. To analyze succession in the context of declining enrollment, a case study survey was conducted of 56 school districts whose peak enrollment…

  6. Managing Educational Facilities and Students' Enrolment in ...

    African Journals Online (AJOL)

    A Standardized research Instrument was used: Managing Educational Facilities and Students Enrolment Questionnaire (MEFSEQ). The Instrument was content, construct and face validated while its reliability co- efficient was established through the test -retest method of 0.84. Inferential Statistics of Pearson Product Moment ...

  7. Gender Preference in Primary School Enrolment among ...

    African Journals Online (AJOL)

    Applying binary probit model to cross-sectional data from 384 respondents randomly drawn from rural and urban communities in the West Mamprusi District of the Northern Region of Ghana, it is revealed that income level of the household head, number of male and female children of school-age, primary school enrolment ...

  8. Functional hyposplenism in long-standing renal transplant recipients.

    Science.gov (United States)

    Araújo, N C; de Lucena, S B S G; Rioja, S D S

    2013-05-01

    A nephrologist with expertise in ultrasonography noticed that patients with longstanding renal grafts had smaller spleens than subjects undergoing initial post-transplantation imaging. This putative finding prompted us to pursue a further investigation into splenic function based on Doppler ultrasound and hematologic parameters. We enrolled 47 patients with functioning long-standing kidney grafts, measuring longitudinal diameter of the spleen, hilar and intrasplenic peak systolic velocities (PSV), and hilar and intrasplenic resistivity indices of the splenic artery as well as mean arterial blood pressure (MAP). Giemsa-stained peripheral blood smears were examined for the presence of Howell-Jolly bodies (HJBs) using light microscopy. The patients were then divided into HJB present (HJ(+)) or absent (HJ(-)) groups for further comparison. The overall mean age of 21 females and 26 males was 47.8 ± 12.0 years, and the mean time after transplantation was 2750 ± 1818 days (range, 208-6446). HJBs were detected in 23/47 patients (48.9%). The intrasplenic artery PSV was significantly lower and MAP higher in the HJ(+) group (P < .05). There was no difference in spleen size between the groups. HJBs in peripheral blood red cells, an indicator of hyposplenism, was associated with reduced intrasplenic artery PSV, suggesting dysfunction, which may play a role in the known vulnerability of renal transplant recipients to infections. Copyright © 2013 Elsevier Inc. All rights reserved.

  9. Strongyloides stercoralis infection in kidney transplant recipients

    Directory of Open Access Journals (Sweden)

    Baha A Abdalhamid

    2015-01-01

    Full Text Available Strongyloides stercoralis is an uncommon infection in Saudi Arabia. It can establish latency and cause an autoinfection in humans that lasts for years. The infection can get reactivated during immunosuppression and can result in a life-threatening Strongyloides hyperinfection syndrome. We present three cases of renal transplant recipients who developed Strongyloides infection following transplantation. A bronchoalveolar lavage specimen, a duodenal biopsy and/or a stool specimen from these patients revealed evidence of S. stercoralis larvae. The first two patients received kidneys from the same deceased donor, a native of Bangladesh, an area that is highly endemic for S. stercoralis. The data suggest that the first two cases might be donor derived. High-risk donors and recipients should be screened for Strongyloides infection to initiate treatment before transplantation thus reducing morbidity and mortality.

  10. Laparoscopic cholecystectomy in a cardiac transplant recipient.

    Science.gov (United States)

    Pandya, Seema R; Paranjape, Saloni

    2014-04-01

    An increasing number of cardiac transplants are being carried out around the world. With increasing longevity, these patients present a unique challenge to non-transplant anesthesiologists for a variety of transplant related or incidental surgeries. The general considerations related to a cardiac transplant recipient are the physiological and pharmacological problems of allograft denervation, the side-effects of immunosuppression, the risk of infection and the potential for rejection. A thorough understanding of the physiology of a denervated heart, need for direct vasoactive agents and post-transplant morbidities is essential in anesthetic management of such a patient. Here, we describe a case of a heart transplant recipient who presented for a cholecystectomy at our center.

  11. Representativeness of enrollment into a perinatal research repository.

    Science.gov (United States)

    Moorehead, Pamela A; Klebanoff, Mark; Nelin, Leif D; Oza-Frank, Reena

    2015-07-01

    To describe enrollment and compare demographic and clinical characteristics of neonates enrolled in the perinatal research repository (PRR) with eligible, but non-enrolled neonates. Characteristics from enrolled infants were compared with eligible, but non-enrolled infants using t-tests, Wilcoxon rank tests and χ(2) tests. Between 1 January 2010 and 31 December 2011, 622 infants admitted to the neonatal intensive care unit (NICU), born repository can enroll a sufficiently representative sample of eligible patients.

  12. [Urinary lithiasis in renal transplant recipient].

    Science.gov (United States)

    Branchereau, J; Thuret, R; Kleinclauss, F; Timsit, M-O

    2016-11-01

    To report epidemiology and characteristics of urinary lithiasis and its management in kidney allograft at the time of organ procurement or after kidney transplantation. An exhaustive systematic review of the scientific literature was performed in the Medline database (http://www.ncbi.nlm.nih.gov) and Embase (http://www.embase.com) using different associations of the following keywords (MESH): urinary lithiasis, stone, kidney transplantation. Publications obtained were selected based on methodology, language, date of publication (last 10 years) and relevance. Prospective and retrospective studies, in English or French, review articles; meta-analysis and guidelines were selected and analyzed. This search found 58 articles. After reading, 37 were included in the text based on their relevance. Frequency of urinary lithiasis in renal transplant recipient is similar to those observed in the general population. Generally, urinary lithiasis of the graft is asymptomatic because of renal denervation after organ procurement and transplantation. Nevertheless, this situation may be at high risk due to the immunosuppressed state of the recipient with a unique functioning kidney. Most of the time, the diagnosis is incidental during routine post-transplantation follow-up. Management of urolithiasis in renal transplant recipient is similar to that performed in general population. Due to its potential severity in transplanted immunosuppressed patients with a sole kidney, urolithiasis requires expert urological management. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  13. Studies of OC-STAMP in Osteoclast Fusion: A New Knockout Mouse Model, Rescue of Cell Fusion, and Transmembrane Topology.

    Directory of Open Access Journals (Sweden)

    Hanna Witwicka

    Full Text Available The fusion of monocyte/macrophage lineage cells into fully active, multinucleated, bone resorbing osteoclasts is a complex cell biological phenomenon that utilizes specialized proteins. OC-STAMP, a multi-pass transmembrane protein, has been shown to be required for pre-osteoclast fusion and for optimal bone resorption activity. A previously reported knockout mouse model had only mononuclear osteoclasts with markedly reduced resorption activity in vitro, but with paradoxically normal skeletal micro-CT parameters. To further explore this and related questions, we used mouse ES cells carrying a gene trap allele to generate a second OC-STAMP null mouse strain. Bone histology showed overall normal bone form with large numbers of TRAP-positive, mononuclear osteoclasts. Micro-CT parameters were not significantly different between knockout and wild type mice at 2 or 6 weeks old. At 6 weeks, metaphyseal TRAP-positive areas were lower and mean size of the areas were smaller in knockout femora, but bone turnover markers in serum were normal. Bone marrow mononuclear cells became TRAP-positive when cultured with CSF-1 and RANKL, but they did not fuse. Expression levels of other osteoclast markers, such as cathepsin K, carbonic anhydrase II, and NFATc1, were not significantly different compared to wild type. Actin rings were present, but small, and pit assays showed a 3.5-fold decrease in area resorbed. Restoring OC-STAMP in knockout cells by lentiviral transduction rescued fusion and resorption. N- and C-termini of OC-STAMP were intracellular, and a predicted glycosylation site was shown to be utilized and to lie on an extracellular loop. The site is conserved in all terrestrial vertebrates and appears to be required for protein stability, but not for fusion. Based on this and other results, we present a topological model of OC-STAMP as a 6-transmembrane domain protein. We also contrast the osteoclast-specific roles of OC- and DC-STAMP with more generalized

  14. Nuclear engineering enrollments and degrees, 1994: Appendixes

    International Nuclear Information System (INIS)

    1995-05-01

    This survey is designed to include those programs sponsored by the Department of Energy. The survey is designed to include those programs offering a major in nuclear engineering or course work equivalent to a major in other engineering disciplines that prepare the graduates to perform as nuclear engineers. This survey provides data on nuclear engineering enrollments and degrees for use in labor market analyses, information on education programs for students, and information on new graduates to employers, government agencies, academia and professional societies

  15. 42 CFR 424.525 - Rejection of a provider or supplier's enrollment application for Medicare enrollment.

    Science.gov (United States)

    2010-10-01

    ... PAYMENT Requirements for Establishing and Maintaining Medicare Billing Privileges § 424.525 Rejection of a... Medicare and obtain Medicare billing privileges after notification of a rejected enrollment application...

  16. Diminished Access: Fall 1982 Enrollment at Independent Colleges and Universities.

    Science.gov (United States)

    Thrift, Julianne Still; Toppe, Christopher

    Results of the fall 1982 survey of enrollments at private colleges and universities are presented, with attention also directed to the effect of the freshman enrollment decline on institutional finance, determinants of enrollment, and future enrollment expectations. Of the approximately 1,500 independent colleges, almost 1,200 institutions…

  17. 42 CFR 407.25 - Beginning of entitlement: Individual enrollment.

    Science.gov (United States)

    2010-10-01

    ..., entitlement began with the third month after the month in which the enrollment request was filed. (c... 42 Public Health 2 2010-10-01 2010-10-01 false Beginning of entitlement: Individual enrollment... Individual Enrollment and Entitlement for SMI § 407.25 Beginning of entitlement: Individual enrollment. The...

  18. Microstructure and Tensile-Shear Properties of Resistance Spot Welded 22MnMoB Hot-Stamping Annealed Steel

    Science.gov (United States)

    Li, Yang; Cui, Xuetuan; Luo, Zhen; Ao, Sansan

    2017-01-01

    The present paper deals with the joining of 22MnMoB hot-stamping annealed steel carried out by the spot welding process. Microstructural characterization, microhardness testing and tensile-shear testing were conducted. The effects of the welding parameters, including the electrode tip diameter, welding current, welding time and electrode force upon the tensile-shear properties of the welded joints, were investigated. The results showed that a weld size of 9.6 mm was required to ensure pullout failure for the 1.8 -mm-thick hot-stamping annealed steel sheet. The welding current had the largest influence upon the tensile-shear properties of the 22MnMoB steel welded joint. The bulk resistance should play an important role in the nugget formation. In pullout failure mode, failure was initiated at the heat-affected zone, where softening occurs owing to the tempering of martensite.

  19. Characterization of patterns of Localized Doping Using Stamping technique for Selective n-Emitter Solar Cell Structure

    Science.gov (United States)

    Mangkornkaew, A.; Fangsuwannarak, T.

    2017-10-01

    In the present, a novel cost-effective process scheme for single step selective emitter diffusion was implemented. It is based on the fabrication of acid-resist pattern using a stamping technique with collaboration of a spin on dopant (SOD) and chemical etched-back emitter methods. The SOD diffusion process provided heavily doping n-emitter. Acid-resist pattern without exploitation of a complex method as a photolithography, was stamped as a metal contact pattern for prevention of a localized heavy-dope region from etching back. Phosphorus doping profiles were controlled by etching back time to provide the formation of n-type selective emitter. Sheet resistance is tunable from 10 to 180 Ohm/Sq on localized n-layer. After removal of the patterned acid-resist, the selective n-emitter solar cell structure was obtained under one-step diffusion to achieve a better blue-light response and low contact resistance.

  20. Pulmonary hypertension and cardiac hypertrophy in children recipients of orthotopic living related liver transplantation

    Directory of Open Access Journals (Sweden)

    Magd A. Kotb

    2017-11-01

    Full Text Available Surgical stress, liberation of cytokines associated with re-perfusion injury, and long standing use of immune suppressive medications in children recipients of orthotopic living related liver transplantation (OLRLT pose cardiovascular risk. Reported cardiovascular adverse effects vary from left ventricular wall thickening, hypertrophic cardiomyopathy to resting ECG abnormalities, asymptomatic ST depression following increased heart rate and ventricular arrhythmias. Twenty-five consecutive children recipients of OLRLT were assessed by conventional 2-D, M-mode echocardiography and Doppler. The mean age ± SD at transplantation and at enrollment in study was 6.3 ± 4.5 and 13.5 ± 5.6 years respectively. All children were on immunosuppressive medications, with tacrolimus being constant among all. Long-term post-transplant echocardiography revealed statistically significant interventricular septal hypertrophy among all (mean thickness 0.89 ± 0.16 cm, (P = 0.0001 in comparison to reference range for age, 24 had pulmonary hypertension (mean mPAP 36.43 ± 5.60 mm Hg, P = 0.0001, and early diastolic dysfunction with a mean Tei index of 0.40 ± 0.10. However cardiac function was generally preserved. Children recipients of OLRLT have cardiac structural and functional abnormalities that can be asymptomatic. Pulmonary hypertension, increased cardiac mass, de novo aortic stenosis and diastolic heart failure were among abnormalities encountered in the studied population. Echocardiography is indispensible in follow-up of children recipients of OLRLT.

  1. Developing roll-to-roll manufacturing system for flexible and stretchable electronics by direct stamping of silver nano-ink

    OpenAIRE

    Kim, Jiseok

    2014-01-01

    Direct stamping of silver nanoparticle based ink has been developed for cost-effective and process-effective manufacturing of flexible or stretchable electronic devices. Facile removal of residual layer from deposited silver nanoparticles (AgNPs) layer results in high fidelity of final silver electrode without further post-processes. Scanning electron microscopy (SEM) images and energy dispersive x-ray spectroscopic analysis have revealed residue-free transfer of microscale inter-digitated ca...

  2. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    OpenAIRE

    Dong Y.; Formosa D.; Fernandez J.; Li X.; Fuentes G.; Zoltan K.; Dong H.

    2015-01-01

    In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tr...

  3. Development of a new biaxial testing system for generating forming limit diagrams for sheet metals under hot stamping conditions

    OpenAIRE

    Shao, Z; Li, N; Lin, J; Dean, TA

    2016-01-01

    Conventional experimental approaches used to generate forming limit diagrams (FLDs) for sheet metals at different linear strain paths are not applicable to hot stamping and cold die quenching processes because cooling occurs prior to deformation and consistent values of heating rate, cooling rate, deformation temperature and strain rate are not easy to obtain. A novel biaxial testing system for use in a Gleeble testing machine has been adopted to generate forming limits of sheet metals, inclu...

  4. Image Subtraction Reduction of Open Clusters M35 & NGC 2158 in the K2 Campaign 0 Super Stamps

    Science.gov (United States)

    Soares-Furtado, M.; Hartman, J. D.; Bakos, G. Á.; Huang, C. X.; Penev, K.; Bhatti, W.

    2017-04-01

    We observed the open clusters M35 and NGC 2158 during the initial K2 campaign (C0). Reducing these data to high-precision photometric timeseries is challenging due to the wide point-spread function (PSF) and the blending of stellar light in such dense regions. We developed an image-subtraction-based K2 reduction pipeline that is applicable to both crowded and sparse stellar fields. We applied our pipeline to the data-rich C0 K2 super stamp, containing the two open clusters, as well as to the neighboring postage stamps. In this paper, we present our image subtraction reduction pipeline and demonstrate that this technique achieves ultra-high photometric precision for sources in the C0 super stamp. We extract the raw light curves of 3960 stars taken from the UCAC4 and EPIC catalogs and de-trend them for systematic effects. We compare our photometric results with the prior reductions published in the literature. For de-trended TFA-corrected sources in the 12-12.25 {{{K}}}{{p}} magnitude range, we achieve a best 6.5-hour window running rms of 35 ppm, falling to 100 ppm for fainter stars in the 14-14.25 {{{K}}}{{p}} magnitude range. For stars with {K}p> 14, our de-trended and 6.5-hour binned light curves achieve the highest photometric precision. Moreover, all our TFA-corrected sources have higher precision on all timescales investigated. This work represents the first published image subtraction analysis of a K2 super stamp. This method will be particularly useful for analyzing the Galactic bulge observations carried out during K2 campaign 9. The raw light curves and the final results of our de-trending processes are publicly available at http://k2.hatsurveys.org/archive/.

  5. Primary intracranial leiomyoma in renal transplant recipient

    Directory of Open Access Journals (Sweden)

    Upasana Patel

    2017-01-01

    Full Text Available Leiomyoma, the benign tumor of smooth muscle cell origin, is commonly seen in genitourinary and gastrointestinal tracts. Primary intracranial leiomyoma, however, is extremely rare occurrence. We hereby report a case of Epstein-Barr negative primary intracranial leiomyoma in a middle-aged renal transplant recipient, which mimicked left frontal parasagittal meningioma on neuroimaging. The tumor was completely excised and diagnosis of leiomyoma was clinched on pathological analysis with immunohistochemistry. The patient improved after tumor removal, and no evidence of tumor recurrence was noted on follow-up study after 10 months postsurgically.

  6. The Choices programme: a simple, front-of-pack stamp making healthy choices easy.

    Science.gov (United States)

    Dötsch-Klerk, Mariska; Jansen, Léon

    2008-01-01

    Some food products fit better within a healthy diet than others, but how can consumers tell? The Choices programme is a simple and internationally-applicable programme to help consumers make a healthy choice on food and beverages and to stimulate industry towards healthy product innovation in all food groups. The essence of the programme is a front-of-pack stamp on products that pass an evaluation against scientific criteria. To that end generic criteria have been established for levels of saturated fat, trans fat, sugars and sodium, which are based on international dietary guidelines (FAO/WHO). For some food categories there are specific criteria for these nutrients as well as for dietary fibre and calories. In this way the criteria are challenging without being impossible to meet. The programme has been initiated by food industry and is open to all companies in food industry, retail and catering. The approach is also supported by nutritional scientists, governments and NGOs. An independent scientific committee is responsible for designing and periodically reviewing the qualifying criteria. The current qualifying criteria were developed by scientific committees in the Netherlands and Belgium. These criteria will now be reviewed by an International Scientific Committee, consisting of internationally-recognised food and nutrition experts. To accommodate the developments in nutrition science and food technology, this review will take place every two years.

  7. Mechanical behavior and modelisation of Ti-6Al-4V titanium sheet under hot stamping conditions

    Science.gov (United States)

    Sirvin, Q.; Velay, V.; Bonnaire, R.; Penazzi, L.

    2017-10-01

    The Ti-6Al-4V titanium alloy is widely used for the manufacture of aeronautical and automotive parts (solid parts). In aeronautics, this alloy is employed for its excellent mechanical behavior associated with low density, outstanding corrosion resistance and good mechanical properties up to 600°C. It is especially used for the manufacture of fuselage frames, on the pylon for carrying out the primary structure (machining forged blocks) and the secondary structure in sheet form. In this last case, the sheet metal forming can be done through various methods: at room temperature by drawing operation, at very high temperature (≃900°C) by superplastic forming (SPF) and at intermediate temperature (≥750°C) by hot forming (HF). In order to reduce production costs and environmental troubles, the cycle times reduction associated with a decrease of temperature levels are relevant. This study focuses on the behavior modelling of Ti-6Al-4V alloy at temperatures above room temperature to obtained greater formability and below SPF condition to reduce tools workshop and energy costs. The displacement field measurement obtained by Digital Image Correlation (DIC) is based on innovative surface preparation pattern adapted to high temperature exposures. Different material parameters are identified to define a model able to predict the mechanical behavior of Ti-6Al-4V alloy under hot stamping conditions. The hardening plastic model identified is introduced in FEM to simulate an omega shape forming operation.

  8. Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

    Science.gov (United States)

    Ma, Xuezhi; Liu, Qiushi; Xu, Da; Zhu, Yangzhi; Kim, Sanggon; Cui, Yongtao; Zhong, Lanlan; Liu, Ming

    2017-11-08

    A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g., hexagonal boron nitride) to pick up the 2D materials. Here, we develop a capillary-force-assisted clean-stamp technique that uses a thin layer of evaporative liquid (e.g., water) as an instant glue to increase the adhesion energy between 2D crystals and polydimethylsiloxane (PDMS) for the pick-up step. After the liquid evaporates, the adhesion energy decreases, and the 2D crystal can be released. The thin liquid layer is condensed to the PDMS surface from its vapor phase, which ensures the low contamination level on the 2D materials and largely remains their chemical and electrical properties. Using this method, we prepared graphene-based transistors with low charge-neutral concentration (3 × 10 10 cm -2 ) and high carrier mobility (up to 48 820 cm 2 V -1 s -1 at room temperature) and heterostructure optoelectronics with high operation speed. Finally, a capillary-force model is developed to explain the experiment.

  9. A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

    Directory of Open Access Journals (Sweden)

    Chih-Ting Lin

    2012-08-01

    Full Text Available A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

  10. Hot stamping of AA6082 tailor welded blanks: experiment and FE simulation

    Directory of Open Access Journals (Sweden)

    Liu Jun

    2016-01-01

    Full Text Available An advanced forming technology, solution Heat treatment, Forming and in-die Quenching (HFQ®, has been employed to form AA6082 tailor welded blanks (TWBs. In comparison with conventional stamping of TWBs, the mechanical properties and formability of AA6082 laser TWBs could be improved under the HFQ® forming condition. The TWB was divided into three physical zones, i.e. base metal, heat affected zone (HAZ and weld zone, based on the hardness distribution. It was found that the degraded hardness of the weldment can be restored after HFQ® forming. TWBs of AA6082 with different thickness ratios of 2 (2–1 mm, 1.3 (2–1.5 mm and 1 (1.5–1.5 mm were used to study the TWB thickness ratio effects on the forming behaviour. Hemispherical punch dome tests on the TWBs with varying thickness ratios demonstrated different formabilities, and indicated increased displacement of the weld line with increasing thickness ratio. Finite element (FE modelling was adopted to analyse the weld line movement and strain distributions during HFQ® forming.

  11. Forming and quenching behaviours in hot stamping of thin quenchable sheets

    Directory of Open Access Journals (Sweden)

    Nakagawa Yuki

    2015-01-01

    Full Text Available A thin aluminium-coated quenchable steel sheet was hot-stamped to investigate the effect of the thickness. The sheets having 0.6, 1.0 and 1.6 mm in thickness were heated at 900 ∘C by a furnace and formed after 7 s from the furnace. The cooling rates of 0.6 mm and 1.0 mm in thickness from 900 ∘C to 400 ∘C under air cooling were 20.9 ∘C/s and 13.6 ∘C/s, respectively. The hardness of the air-cooled sheets having 1.0 mm in thickness was 300 HV1, whereas that of the sheet having 0.6 mm in thickness was 380 HV1 because of the high cooling rate. The Vickers hardness of the U-bent sheets of 0.6 and 1.0 mm after 7 s from the furnace without the holding time at the bottom dead centre were 500 and 430 HV1, respectively.

  12. Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

    Science.gov (United States)

    Vollmer, R.; Palm, C.

    2017-09-01

    The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

  13. Effect of cooling rate during hot stamping on low cyclic fatigue of boron steel sheet

    Science.gov (United States)

    Suh, Chang Hee; Jang, Won Seok; Oh, Sang Kyun; Lee, Rac Gyu; Jung, Yun-Chul; Kim, Young Suk

    2012-08-01

    Boron steel is widely used throughout the automobile industry due to its high tensile strength and hardenability. When boron steel is used for body parts, only high strength is required for crashworthiness. However, when boron steel is used for chassis parts, a high fatigue life is needed. The microstructure of boron steel is mainly affected by the cooling rate during hot stamping. Therefore, this study investigated the low cyclic fatigue life according to the cooling rate. The fatigue life increased at a low strain amplitude when the cooling rate was fast. However, at a high strain amplitude, the fatigue life decreased, due to the low ductility and fracture toughness of the martensite formed by rapid cooling. Martensite formed by a fast cooling rate shows excellent fatigue life at a low total strain amplitude; however, a multiphase microstructure formed by a slow cooling rate is recommended if the parts experience high and low total strain amplitudes alternately. In addition, the cooling rate has little effect on the distribution of solute boron and boron precipitations, so it is expected that boron rarely affects low cyclic fatigue.

  14. Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

    Science.gov (United States)

    Veit, R.; Hofmann, H.; Kolleck, R.; Sikora, S.

    2011-01-01

    Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating. In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

  15. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Science.gov (United States)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny-Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples.

  16. Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction

    Science.gov (United States)

    Deng; Wu; Brittain; Whitesides

    2000-07-15

    This paper describes a practical method for the fabrication of photomasks, masters, and stamps/molds used in soft lithography that minimizes the need for specialized equipment. In this method, CAD files are first printed onto paper using an office printer with resolution of 600 dots/in. Photographic reduction of these printed patterns transfers the images onto 35-mm film or microfiche. These photographic films can be used, after development, as photomasks in 1:1 contact photolithography. With the resulting photoresist masters, it is straightforward to fabricate poly(dimethylsiloxane) (PDMS) stamps/molds for soft lithography. This process can generate microstructures as small as 15 microm; the overall time to go from CAD file to PDMS stamp is 4-24 h. Although access to equipment-spin coater and ultraviolet exposure tool-normally found in the clean room is still required, the cost of the photomask itself is small, and the time required to go from concept to device is short. A comparison between this method and all other methods that generate film-type photomasks has been performed using test patterns of lines, squares, and circles. Three microstructures have also been fabricated to demonstrate the utility of this method in practical applications.

  17. Nuclear engineering enrollments and degrees, 1981

    International Nuclear Information System (INIS)

    Little, J.R.; Shirley, D.L.

    1982-05-01

    This report presents data on the number of students enrolled and the degrees awarded in academic year 1980-81 from 73 US institutions offering degree programs in nuclear engineering or nuclear options within other engineering fields. Presented here are historical data for the last decade, which provide information such as trends by degree level, foreign national student participation, female and minority student participation, and placement of graduates. Also included is a listing of the universities by type of program and number of students

  18. Enrollment in Distance Education Classes Is Associated with Fewer Enrollment Gaps among Nontraditional Undergraduate Students in the US

    Science.gov (United States)

    Pontes, Manuel C. F.; Pontes, Nancy M. H.

    2012-01-01

    The purpose of this research is to determine whether nontraditional undergraduate students in the US who enroll in distance education classes are less likely to have an enrollment gap (enrollment gap=part year enrollment). Previous research has shown that preference for distance education classes is significantly greater among nontraditional than…

  19. Acute Hepatic Allograft Rejection in Pediatric Recipients: Independent Factors

    OpenAIRE

    Dehghani, S. M.; Shahramian, I.; Afshari, M.; Bahmanyar, M.; Ataollahi, M.; Sargazi, A.

    2017-01-01

    Background: Acute cellular rejection (ACR) has a reversible effect on graft and its survival. Objective: To evaluate the relation between ACR and clinical factors in recipients of liver transplant allografts. Methods: 47 consecutive liver recipients were retrospectively studied. Their data were extracted from records and analyzed. Results: 38 (81%) of the 47 recipients experienced ACR during a 24-month follow-up. The rate of rejection was associated with none of the studied factors—recipient’...

  20. Lung Cancer in Renal Transplant Recipients

    Directory of Open Access Journals (Sweden)

    Jozicic Mirela

    2016-06-01

    Full Text Available Introduction. Although the incidence of malignancy has increased after solid organ transplantation, data on lung cancer in this group of patients is scarce. The aim of this study was to determine clinical characteristics and outcome of patients who developed lung cancer after renal transplantation. Methods. Among a cohort of 1658 patients who received a transplant at our institution and were followedup between 1973 and 2014, five patients developed lung cancer. We analyzed risk factors, transplantation characteristics, treatment options and survival. Results. Lung cancer was diagnosed in 5 patients (0.3%. Time to diagnosis after the transplant procedure ranged from 26 to 156 months (mean 115 months. All of them had a smoking history. Tumors were classified as IIB (20%, IIIA (40%, and IV (40%. Histological types included adenocarcinoma (80% and there was one case of sarcomatoid carcinoma (20%. One patient had concomitant thyroid papillary carcinoma. Radiotherapy was applied in 2 patients, 2 underwent chemotherapy (erlotinib and combination of carboplatinum and etopozide in one patient each, and 2 died within one month after the diagnosis from disseminated malignant disease. Patients with stage IIIA survived 14 and 24 months after the diagnosis. The patient with sarcomatoid cancer underwent thoracotomy with a complete resection, lost his graft function and died 7 months after the diagnosis. Conclusion. Lung cancer is relatively rare malignancy in renal transplant recipients, but associated with high mortality. Smoking is a significant risk factor, thus smoking cessation should be promoted among renal transplant recipients, as well as regular screening for lung cancer.

  1. [Profile of clinical trials enrolling Brazilian children].

    Science.gov (United States)

    Vieira, Jean Mendes de Lucena; Lima, Elisangela da Costa; Land, Marcelo Gerardin Poirot; Ventura, Miriam; Coelho, Helena Lutescia Luna

    2017-06-12

    This study aimed to characterize the clinical trials with medicines enrolling Brazilian children and adolescents, registered in the databases of Clinical Trials and the Brazilian Clinical Trials Network (ReBEC) from 1994 to 2014. Only 462 clinical trials enrolled Brazilian children and adolescents. There was an increase in registrations beginning in 2003, with an important drop in 2011. Among these trials, 35.5% were hosted in Brazil. The international clinical trials were mostly conducted by North American companies. In both cases, multinational industry was the principal source of funding. The clinical trials were predominantly phase III with injectable and solid oral pharmaceutical forms of antiviral drugs. Domestic clinical trials showed wider variation in the pharmaceutical forms and higher percentage of liquid formulations, when compared to the international trials. In addition to heavy external dependence for conducting clinical trials, the study emphasized the challenge for pediatric care in Brazil, which presents epidemiological peculiarities in an environment prone to the use of unlicensed medicines for children.

  2. Recipients affect prosocial and altruistic choices in jackdaws, Corvus monedula.

    Directory of Open Access Journals (Sweden)

    Christine Schwab

    Full Text Available Other-regarding preferences are a critical feature of human cooperation but to what extent non-human animals exhibit these preferences is a matter of intense discussion. We tested whether jackdaws show prosocial behaviour (providing benefits to others at no cost to themselves and altruism (providing benefits to others while incurring costs with both sibling and non-sibling recipients. In the prosocial condition, a box was baited on both the actor's and the recipient's side (1/1 option, whereas another box provided food only for the actor (1/0 option. In the altruistic condition, the boxes contained food for either the actor (1/0 option or the recipient (0/1 option. The proportion of selfish (1/0 option and cooperative (1/1 and 0/1 option, respectively actors' choices was significantly affected by the recipients' behaviour. If recipients approached the boxes first and positioned themselves next to the box baited on their side, trying to access the food reward (recipient-first trials, actors were significantly more cooperative than when the actors approached the boxes first and made their choice prior to the recipients' arrival (actor-first trials. Further, in recipient-first trials actors were more cooperative towards recipients of the opposite sex, an effect that was even more pronounced in the altruistic condition. Hence, at no cost to the actors, all recipients could significantly influence the actors' behaviour, whereas at high costs this could be achieved even more so by recipients of different sex. Local/stimulus enhancement is discussed as the most likely cognitive mechanism to account for these effects.

  3. Probing Protein Multidimensional Conformational Fluctuations by Single-Molecule Multiparameter Photon Stamping Spectroscopy

    Science.gov (United States)

    2015-01-01

    Conformational motions of proteins are highly dynamic and intrinsically complex. To capture the temporal and spatial complexity of conformational motions and further to understand their roles in protein functions, an attempt is made to probe multidimensional conformational dynamics of proteins besides the typical one-dimensional FRET coordinate or the projected conformational motions on the one-dimensional FRET coordinate. T4 lysozyme hinge-bending motions between two domains along α-helix have been probed by single-molecule FRET. Nevertheless, the domain motions of T4 lysozyme are rather complex involving multiple coupled nuclear coordinates and most likely contain motions besides hinge-bending. It is highly likely that the multiple dimensional protein conformational motions beyond the typical enzymatic hinged-bending motions have profound impact on overall enzymatic functions. In this report, we have developed a single-molecule multiparameter photon stamping spectroscopy integrating fluorescence anisotropy, FRET, and fluorescence lifetime. This spectroscopic approach enables simultaneous observations of both FRET-related site-to-site conformational dynamics and molecular rotational (or orientational) motions of individual Cy3-Cy5 labeled T4 lysozyme molecules. We have further observed wide-distributed rotational flexibility along orientation coordinates by recording fluorescence anisotropy and simultaneously identified multiple intermediate conformational states along FRET coordinate by monitoring time-dependent donor lifetime, presenting a whole picture of multidimensional conformational dynamics in the process of T4 lysozyme open-close hinge-bending enzymatic turnover motions under enzymatic reaction conditions. By analyzing the autocorrelation functions of both lifetime and anisotropy trajectories, we have also observed the dynamic and static inhomogeneity of T4 lysozyme multidimensional conformational fluctuation dynamics, providing a fundamental

  4. Who hires physics bachelor's degree recipients?

    Science.gov (United States)

    White, Susan C.

    2015-04-01

    As we saw last month, over 40% of the students who recently earned bachelor's degrees in physics enter the job market. There are employment opportunities for these graduates in all areas of the economy. When we contact graduates, we ask them where they are working, and we use their responses to compile a list of employers in each state who have recently hired a physics bachelor's degree recipient. We also produce a separate list of firms that have hired three or more physics bachelor's. These lists can be useful tools for students who want to know more about where one can find a job with a bachelor's degree in physics. The lists are available at www.aip.org/whos-hiring-physics-bachelors.

  5. Immunologic monitoring in kidney transplant recipients

    Directory of Open Access Journals (Sweden)

    Natavudh Townamchai

    2013-06-01

    Full Text Available Transplant biopsy has always been the gold standard for assessing the immune response to a kidney allograft (Chandraker A: Diagnostic techniques in the work-up of renal allograft dysfunction—an update. Curr Opin Nephrol Hypertens 8:723–728, 1999. A biopsy is not without risk and is unable to predict rejection and is only diagnostic once rejection has already occurred. However, in the past two decades, we have seen an expansion in assays that can potentially put an end to the “drug level” era, which until now has been one of the few tools available to clinicians for monitoring the immune response. A better understanding of the mechanisms of rejection and tolerance, and technological advances has led to the development of new noninvasive methods to monitor the immune response. In this article, we discuss these new methods and their potential uses in renal transplant recipients.

  6. Viral Infection in Renal Transplant Recipients

    Directory of Open Access Journals (Sweden)

    Jovana Cukuranovic

    2012-01-01

    Full Text Available Viruses are among the most common causes of opportunistic infection after transplantation. The risk for viral infection is a function of the specific virus encountered, the intensity of immune suppression used to prevent graft rejection, and other host factors governing susceptibility. Although cytomegalovirus is the most common opportunistic pathogen seen in transplant recipients, numerous other viruses have also affected outcomes. In some cases, preventive measures such as pretransplant screening, prophylactic antiviral therapy, or posttransplant viral monitoring may limit the impact of these infections. Recent advances in laboratory monitoring and antiviral therapy have improved outcomes. Studies of viral latency, reactivation, and the cellular effects of viral infection will provide clues for future strategies in prevention and treatment of viral infections. This paper will summarize the major viral infections seen following transplant and discuss strategies for prevention and management of these potential pathogens.

  7. Predictors of hyperparathyroidism in renal transplant recipients

    International Nuclear Information System (INIS)

    Houssaini, T.S.; Arrayahani, M.; Rhou, H.; Amar, Y.; Benamar, L.; Ouzeddoun, N.; Bayahia, R.

    2008-01-01

    The changes in parathyroid hormone secretion after successful renal transplantation remain to be clearly elucidated. Our study was aimed at identifying the predictors of hyperparathyroidism in renal transplant recipients. A retrospective single center study involving 37 renal transplant recipients, with a follow-up of at least one year, was performed. All transplants were performed using kidneys from living related donors. The average age of study patients was 30+-10 years, with a male-female ratio of 1.31. The mean duration on hemodialysis (HD) prior to transplantation was 25+-18 months. All the grafts but one were functional after a mean follow-up of 41+-21 months. We noted a rapid reduction of the mean parathyroid hormone (iPTH) level from 383+-265 pg/ml before transplantation to 125+-67 pg/ml at one year and 108+-66 pg/ml at two years after transplantation (p=0.01). Bivariate analysis revealed that the level of iPTH obtained during follow-up correlated with the duration on HD (p=0.03), the serum creatinine at 24-months (p=0.013), and to the level of iPTH in the first year post transplantation (P=<0.001). Other clinical or laboratory parameters were not predictive of hyperparathyroidism after kidney transplantation. Liner regression showed that only the serum creatinine at 24-months independently correlated with the level of iPTH at last follow-up (p=0.02). Our study suggests that short duration on HD and a functional graft are the main predictors of correction of hyperparathyroidism after renal transplantation. (author)

  8. Multisensory Integration in Cochlear Implant Recipients.

    Science.gov (United States)

    Stevenson, Ryan A; Sheffield, Sterling W; Butera, Iliza M; Gifford, René H; Wallace, Mark T

    Speech perception is inherently a multisensory process involving integration of auditory and visual cues. Multisensory integration in cochlear implant (CI) recipients is a unique circumstance in that the integration occurs after auditory deprivation and the provision of hearing via the CI. Despite the clear importance of multisensory cues for perception, in general, and for speech intelligibility, specifically, the topic of multisensory perceptual benefits in CI users has only recently begun to emerge as an area of inquiry. We review the research that has been conducted on multisensory integration in CI users to date and suggest a number of areas needing further research. The overall pattern of results indicates that many CI recipients show at least some perceptual gain that can be attributable to multisensory integration. The extent of this gain, however, varies based on a number of factors, including age of implantation and specific task being assessed (e.g., stimulus detection, phoneme perception, word recognition). Although both children and adults with CIs obtain audiovisual benefits for phoneme, word, and sentence stimuli, neither group shows demonstrable gain for suprasegmental feature perception. Additionally, only early-implanted children and the highest performing adults obtain audiovisual integration benefits similar to individuals with normal hearing. Increasing age of implantation in children is associated with poorer gains resultant from audiovisual integration, suggesting a sensitive period in development for the brain networks that subserve these integrative functions, as well as length of auditory experience. This finding highlights the need for early detection of and intervention for hearing loss, not only in terms of auditory perception, but also in terms of the behavioral and perceptual benefits of audiovisual processing. Importantly, patterns of auditory, visual, and audiovisual responses suggest that underlying integrative processes may be

  9. 42 CFR 424.516 - Additional provider and supplier requirements for enrolling and maintaining active enrollment...

    Science.gov (United States)

    2010-10-01

    ...) MEDICARE PROGRAM CONDITIONS FOR MEDICARE PAYMENT Requirements for Establishing and Maintaining Medicare Billing Privileges § 424.516 Additional provider and supplier requirements for enrolling and maintaining... DMEPOS, laboratory, imaging, or specialist services) relating to written orders and requests for payments...

  10. Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

    Science.gov (United States)

    Lin, Wenhu; Li, Fang; Wu, Dongsheng; Chen, Xiaoguan; Hua, Xueming; Pan, Hua

    2018-03-01

    22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

  11. Profiles of blood and blood component transfusion recipients in Zimbabwe

    NARCIS (Netherlands)

    Mafirakureva, Nyashadzaishe; Khoza, Star; Hassall, Oliver; Faragher, Brian E.; Kajja, Isaac; Mvere, David A.; Emmanuel, Jean C.; Postma, Maarten J.; van Hulst, Marinus

    2015-01-01

    Background. There are limited published data on the characteristics of blood transfusion recipients in sub-Saharan Africa. This study describes the demographic characteristics of blood transfusion recipients and patterns of blood and blood component use in Zimbabwe. Materials and methods. Data on

  12. 42 CFR 431.808 - Protection of recipient rights.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Protection of recipient rights. 431.808 Section 431... Provisions § 431.808 Protection of recipient rights. Any individual performing activities under the MEQC... is consistent with the provisions of §§ 435.902 and 436.901 of this subchapter concerning the rights...

  13. 45 CFR 1643.5 - Recipient policies and recordkeeping.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies and recordkeeping. 1643.5 Section 1643.5 Public Welfare Regulations Relating to Public Welfare (Continued) LEGAL SERVICES CORPORATION RESTRICTION ON ASSISTED SUICIDE, EUTHANASIA, AND MERCY KILLING § 1643.5 Recipient policies and...

  14. Development of nuclear technology transfer - Korea as a recipient

    International Nuclear Information System (INIS)

    Sung, N.C.

    1988-01-01

    Korea, as a recipient of nuclear technology transfer, has good experience of progressively building up its indigenous capability of nuclear technology through three stages of technology transfer, namely: technology transfer under the turn-key approach, component approach, and integrated technology transfer with a local prime contractor. Here, each stage of experience of technology transfer, with Korea as a recipient, is presented

  15. Tidewater Community College Fall Semester 1998 Enrollment Report.

    Science.gov (United States)

    Kleiman, Lisa

    This report analyzes Tidewater Community College's (Virginia) fall 1998 enrollment and illustrates which enrollment variables contributed to the 5% college-wide growth. It includes an in-depth look, both from a college-wide and campus perspective, at demographics, programs, productivity, and annual projections. Much of the enrollment growth…

  16. 42 CFR 417.538 - Enrollment and marketing costs.

    Science.gov (United States)

    2010-10-01

    ... PREPAYMENT PLANS Medicare Payment: Cost Basis § 417.538 Enrollment and marketing costs. (a) Principle. Costs incurred by an HMO or CMP in performing the enrollment and marketing activities described in subpart k of... 42 Public Health 3 2010-10-01 2010-10-01 false Enrollment and marketing costs. 417.538 Section 417...

  17. Ethical considerations in implementing a biometric co-enrol- ment ...

    African Journals Online (AJOL)

    number (if not South African) and fingerprints. This information is used to determine if a participant has screened and/or enrolled at any other research site that is listed in the co-enrolment database. The system can also link studies which are pre-determined by the investigators, to allow co-enrolment. BCEPS is currently ...

  18. An Integrated Model of Application, Admission, Enrollment, and Financial Aid

    Science.gov (United States)

    DesJardins, Stephen L.; Ahlburg, Dennis A.; McCall, Brian Patrick

    2006-01-01

    We jointly model the application, admission, financial aid determination, and enrollment decision process. We find that expectations of admission affect application probabilities, financial aid expectations affect enrollment and application behavior, and deviations from aid expectations are strongly related to enrollment. We also conduct…

  19. German Undergraduate Mathematics Enrolment Numbers: Background and Change

    Science.gov (United States)

    Ammann, Claudia; Frauendiener, Jorg; Holton, Derek

    2010-01-01

    Before we consider the German tertiary system, we review the education system and consider other relevant background details. We then concentrate on the tertiary system and observe that the mathematical enrolments are keeping up with the overall student enrolments. At the same time, the first year mathematics enrolments for women are greater than…

  20. Skin Cancer Risk in Hematopoietic Stem-Cell Transplant Recipients Compared With Background Population and Renal Transplant Recipients

    DEFF Research Database (Denmark)

    Omland, Silje Haukali; Gniadecki, Robert; Hædersdal, Merete

    2016-01-01

    IMPORTANCE: While a high risk of nonmelanoma skin cancer is well recognized in solid-organ transplant recipients, the risk of skin cancer in hematopoietic stem-cell transplant (HSCT) recipients has not been extensively studied. OBJECTIVE: To determine the risk of cutaneous cancer in HSCT recipients...... autologous) from 1999 through 2014, 4789 RTRs from 1976 through 2014, and 10 age- and sex-matched nontransplanted individuals for each of the groups from the background population. Person-years at risk were calculated from the time of study inclusion until first cutaneous cancer. To compare the risk of skin...... cancer between transplant recipients and background population, we used a stratified proportional hazard regression model for hazard ratio (HR) estimations. By use of the cumulative incidence, we estimated 5- and 10-year risks of skin cancers. All RTR and HSCT recipients were treated and followed up...

  1. Serial and parallel Si, Ge, and SiGe direct-write with scanning probes and conducting stamps

    Energy Technology Data Exchange (ETDEWEB)

    Vasko, Stephanie E.; Kapetanovic, Adnan; Talla, Vamsi; Brasino, Michael D.; Zhu, Zihua; Scholl, Andreas; Torrey, Jessica D.; Rolandi, Marco

    2011-05-16

    Precise materials integration in nanostructures is fundamental for future electronic and photonic devices. We demonstrate Si, Ge, and SiGe nanostructure direct-write with deterministic size, geometry, and placement control. The biased probe of an atomic force microscope (AFM) reacts diphenylsilane or diphenylgermane to direct-write carbon-free Si, Ge, and SiGe nano and heterostructures. Parallel directwrite is available on large areas by substituting the AFM probe with conducting microstructured stamps. This facile strategy can be easily expanded to a broad variety of semiconductor materials through precursor selection.

  2. Design and implementation of a nanosecond time-stamping readout system-on-chip for photo-detectors

    Energy Technology Data Exchange (ETDEWEB)

    Anvar, Shebli; Château, Frédéric; Le Provost, Hervé; Louis, Frédéric [CEA/Irfu/SEDI Gif-sur-Yvette (France); Manolopoulos, Konstantinos [Physics Department, University of Athens (Greece); Moudden, Yassir, E-mail: yassir.moudden@cea.fr [CEA/Irfu/SEDI Gif-sur-Yvette (France); Vallage, Bertrand [CEA/Irfu/SPP Gif-sur-Yvette (France); Zonca, Eric [CEA/Irfu/SEDI Gif-sur-Yvette (France)

    2014-01-21

    A readout system suitable for a large number of synchronized photo-detection units has been designed. Each unit embeds a specifically designed fully integrated communicating system based on Xilinx FPGA SoC technology. It runs the VxWorks real-time OS and a custom data acquisition software designed within the Ice middleware framework, resulting in a highly flexible, controllable and scalable distributed application. Clock distribution and delay calibration over customized fixed latency gigabit Ethernet links enable synchronous time-stamping of events with nanosecond precision. The implementation of this readout system on several data-collecting units as well as its performances are described.

  3. 75 FR 24437 - Medicare and Medicaid Programs; Changes in Provider and Supplier Enrollment, Ordering and...

    Science.gov (United States)

    2010-05-05

    ... drop slots located in the main lobby of the building. A stamp- in clock is available for persons... the concept of ``surrogate NPIs'' nor did it contain a provision for the establishment of ``surrogate...

  4. 2012 Annual Survey of Journalism and Mass Communication Enrollments: Enrollments Decline for Second Year in a Row

    Science.gov (United States)

    Becker, Lee B.; Vlad, Tudor; Simpson, Holly Anne

    2013-01-01

    Enrollments in journalism and mass communication programs in the United States have declined over the last two years, reversing a pattern of growth that has sustained the field for twenty years. It is a decline at a time of continued growth in enrollments at universities generally. It is a decline at a time when enrollments have been growing in…

  5. Can audiometric results predict qualitative hearing improvements in bone-anchored hearing aid recipients?

    Science.gov (United States)

    McNeil, M L; Gulliver, M; Morris, D P; Makki, F M; Bance, M

    2014-01-01

    Patients receiving a bone-anchored hearing aid have well-documented improvements in their quality of life and audiometric performance. However, the relationship between audiometric measurements and subjective improvement is not well understood. Adult patients enrolled in the Nova Scotia bone-anchored hearing aid programme were identified. The pure tone average for fitting the sound-field threshold, as well as the better and worse hearing ear bone conduction and air conduction levels, were collected pre-operatively. Recipients were asked to complete the Speech, Spatial and Qualities of Hearing questionnaire; their partners were asked to complete a pre- and post-bone anchored hearing aid fitting Hearing Handicap Inventory for Adults questionnaire. Forty-eight patients who completed and returned the Speech, Spatial and Qualities of Hearing questionnaire had partners who completed the Hearing Handicap Inventory for Adults questionnaire. The results from the Speech, Spatial and Qualities of Hearing questionnaire correlated with the sound-field hearing threshold post-bone-anchored hearing aid fitting and the pure tone average of the better hearing ear bone conduction (total Speech, Spatial and Qualities of Hearing Scale to the pre-operative better hearing ear air curve (r = 0.3); worse hearing ear air curve (r = 0.27); post-operative, bone-anchored hearing aid-aided sound-field thresholds (r = 0.35)). An improvement in sound-field threshold correlated only with spatial abilities. In the Hearing Handicap Inventory for Adults questionnaire, there was no correlation between the subjective evaluation of each patient and their partner. The subjective impressions of hearing aid recipients with regards to speech reception and the spatial qualities of hearing correlate well with pre-operative audiometric results. However, the overall magnitude of sound-field improvement predicts an improvement of spatial perception, but not other aspects of hearing, resulting in hearing aid

  6. Non-invasive quantification of collagen turnover in renal transplant recipients

    DEFF Research Database (Denmark)

    Stribos, Elisabeth G D; Nielsen, Signe Holm; Pedersen, Susanne Brix

    2017-01-01

    Kidney allograft failure due to chronic injury/rejection remains the main cause of graft loss in renal transplant recipients (RTR). Here, we investigated whether specific biomarkers of extracellular matrix (ECM) turnover are associated with allograft function and chronic kidney disease (CKD) stage...... in RTR. Seventy-eight patients who attended the University Medical Center Groningen for a routine check-up after kidney transplantation were enrolled in the study. Plasma and/or 24h-urine samples were collected and specific matrix-metalloproteinase-generated neo-epitope fragments of collagens were...... turnover associated with ECM remodeling and fibrosis that can stratify patients by CKD stage. This is as promising first step towards non-invasive monitoring of ECM turnover in the kidneys...

  7. Perceptual learning and auditory training in cochlear implant recipients.

    Science.gov (United States)

    Fu, Qian-Jie; Galvin, John J

    2007-09-01

    Learning electrically stimulated speech patterns can be a new and difficult experience for cochlear implant (CI) recipients. Recent studies have shown that most implant recipients at least partially adapt to these new patterns via passive, daily-listening experiences. Gradually introducing a speech processor parameter (eg, the degree of spectral mismatch) may provide for more complete and less stressful adaptation. Although the implant device restores hearing sensation and the continued use of the implant provides some degree of adaptation, active auditory rehabilitation may be necessary to maximize the benefit of implantation for CI recipients. Currently, there are scant resources for auditory rehabilitation for adult, postlingually deafened CI recipients. We recently developed a computer-assisted speech-training program to provide the means to conduct auditory rehabilitation at home. The training software targets important acoustic contrasts among speech stimuli, provides auditory and visual feedback, and incorporates progressive training techniques, thereby maintaining recipients' interest during the auditory training exercises. Our recent studies demonstrate the effectiveness of targeted auditory training in improving CI recipients' speech and music perception. Provided with an inexpensive and effective auditory training program, CI recipients may find the motivation and momentum to get the most from the implant device.

  8. Physical Activity and Kidney Injury in Pediatric and Young Adult Kidney Transplant Recipients.

    Science.gov (United States)

    Wolf, Mattie F; George, Roshan P; Warshaw, Barry; Wang, Elizabeth; Greenbaum, Larry A

    2016-12-01

    To quantify physical activity and grip strength in pediatric kidney transplant recipients and describe attitudes about exercise and exercise counseling given concerns about allograft injury. This was a cross-sectional analysis of 101 kidney transplant recipients (7-21 years old) >6 months post-transplant. Patients completed the Physical Activity Questionnaire (PAQ). Grip strength was measured with a dynamometer. We asked about activity limitations and provider counseling. Univariate analysis and multiple linear regression were used to determine independent predictors of PAQ score and grip strength z score. We enrolled 101 of 122 eligible patients. Median PAQ score was 2.2 (range 0-5) and was lower compared with controls (P < .001). The average grip strength z score was -1.1 and -0.7 in the right and left hand, respectively. Predictors of lower grip strength were younger age (P = .036), non-African American race (P = .029), lower height z score (P = .010), and longer percentage of lifetime with kidney disease (P = .029). Although 49% and 67% limited exercise before and after transplant, respectively, 67% reported increased activity after transplant. By parent report, provider counseling included limiting certain activities (71%) and encouraging regular exercise (45%). Physical activity and grip strength are low after kidney transplant. Patients perceive an emphasis on exercise limitations rather than the benefits of regular exercise. Interventions that encourage physical activity may be beneficial. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Correlation and Agreement of Handheld Spirometry with Laboratory Spirometry in Allogeneic Hematopoietic Cell Transplant Recipients.

    Science.gov (United States)

    Cheng, Guang-Shing; Campbell, Angela P; Xie, Hu; Stednick, Zach; Callais, Cheryl; Leisenring, Wendy M; Englund, Janet A; Chien, Jason W; Boeckh, Michael

    2016-05-01

    Early detection of subclinical lung function decline may help identify allogeneic hematopoietic cell transplant (HCT) recipients who are at increased risk for late noninfectious pulmonary complications, including bronchiolitis obliterans syndrome. We evaluated the use of handheld spirometry in this population. Allogeneic HCT recipients enrolled in a single-center observational trial performed weekly spirometry with a handheld spirometer for 1 year after transplantation. Participants performed pulmonary function tests in an outpatient laboratory setting at 3 time points: before transplantation, at day 80 after transplantation, and at 1 year after transplantation. Correlation between the 2 methods was assessed by Pearson and Spearman correlations; agreement was assessed using Bland-Altman plots. A total of 437 subjects had evaluable pulmonary function tests. Correlation for forced expiratory volume in 1 second (FEV1) was r = .954 (P spirometry correlated well with laboratory spirometry after allogeneic HCT and may be useful for self-monitoring of patients for early identification of airflow obstruction. Copyright © 2016 American Society for Blood and Marrow Transplantation. All rights reserved.

  10. Evaluation of a Novel Global Immunity Assay to Predict Infection in Organ Transplant Recipients.

    Science.gov (United States)

    Mian, Muhtashim; Natori, Yoichiro; Ferreira, Victor; Selzner, Nazia; Husain, Shahid; Singer, Lianne; Kim, S Joseph; Humar, Atul; Kumar, Deepali

    2017-12-21

    Solid organ transplant recipients (SOTRs) are predisposed to infection due to the need for lifelong immunosuppression, although tools to measure the overall degree of immunosuppression are limited. In this study, we used a novel global cell-mediated immunity (CMI) assay to quantify the degree of immunosuppression and predict subsequent infections. Consecutive SOTRs were enrolled and provided whole blood to conduct the global CMI assay (QuantiFERON Monitor) at 1, 3, and 6 months posttransplant. The assay measures plasma interferon gamma (IFN-γ) levels after stimulation of whole blood with antigens that stimulate both innate and adaptive immunity. Bacterial, viral, and fungal infections were prospectively recorded. We enrolled 137 patients who provided CMI measurements on at least 1 study timepoint. Median age was 58 years; transplant types were kidney (32.1%), liver (30.7%), and lung (36.5%). At least 1 episode of infection occurred in 32 of 137 (23.4%) patients between 1 and 3 months, 34 of 135 (25.1%) between 3 and 6 months, and 39 of 132 (29.5%) between 6 and 12 months. IFN-γ levels were significantly lower in those with at least 1 episode of infection vs no infection at month 1 (P = .04), month 3 (P = .05), and month 6 (P = .006). Patients who developed opportunistic infections (OIs) also showed a significantly lower CMI than those without OI at months 3 and 6. Using a cutoff value of ≤10 IU/mL of IFN-γ, there was a 2- to 3-fold greater likelihood of subsequent infection in those with lower CMI. We show that a novel global immunity assay is able to quantify the level of immunosuppression and predict the risk of subsequent infection episodes in organ transplant recipients. © The Author(s) 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

  11. ACUTE APENDICITIS IN LIVER TRANSPLANT RECIPIENTS.

    Science.gov (United States)

    Fonseca-Neto, Olival Cirilo Lucena da; Lima, Heloise Caroline de Souza; Melo, Paulo Sérgio Vieira de; Lemos, Roberto; Leitão, Laércio; Amorim, Américo Gusmão; Lacerda, Cláudio Moura

    2016-03-01

    Appendicitis is a common cause of emergency surgery that in the population undergoing organ transplantation presents a rare incidence due to late diagnosis and treatment. To report the occurrence of acute appendicitis in a cohort of liver transplant recipients. Retrospective analysis in a period of 12 years among 925 liver transplants, in witch five cases of acute appendicitis were encountered. Appendicitis occurred between three and 46 months after liver transplantation. The age ranged between 15 and 58 years. There were three men and two women. The clinical presentations varied, but not discordant from those found in non-transplanted patients. Pain was a symptom found in all patients, in two cases well located in the right iliac fossa (40%). Two patients had symptoms characteristic of peritoneal irritation (40%) and one patient had abdominal distention (20%). All patients were submitted to laparotomies. In 20% there were no complications. In 80% was performed appendectomy complicated by suppuration (40%) or perforation (40%). Superficial infection of the surgical site occurred in two patients, requiring clinical management. The hospital stay ranged from 48 h to 45 days. Acute appendicitis after liver transplantation is a rare event being associated with a high rate of drilling, due to delays in diagnosis and therapy, and an increase in hospital stay.

  12. Prostate cancer in renal transplant recipients

    Directory of Open Access Journals (Sweden)

    Benjamin A. Sherer

    Full Text Available ABSTRACT As patients with end-stage renal disease are receiving renal allografts at older ages, the number of male renal transplant recipients (RTRs being diagnosed with prostate cancer (CaP is increasing. Historically, the literature regarding the management of CaP in RTR's is limited to case reports and small case series. To date, there are no standardized guidelines for screening or management of CaP in these complex patients. To better understand the unique characteristics of CaP in the renal transplant population, we performed a literature review of PubMed, without date limitations, using a combination of search terms including prostate cancer, end stage renal disease, renal transplantation, prostate cancer screening, prostate specific antigen kinetics, immuno-suppression, prostatectomy, and radiation therapy. Of special note, teams facilitating the care of these complex patients must carefully and meticulously consider the altered anatomy for surgical and radiotherapeutic planning. Active surveillance, though gaining popularity in the general low risk prostate cancer population, needs further study in this group, as does the management of advance disease. This review provides a comprehensive and contemporary understanding of the incidence, screening measures, risk stratification, and treatment options for CaP in RTRs.

  13. Clinical outcomes in overweight heart transplant recipients.

    Science.gov (United States)

    Jalowiec, Anne; Grady, Kathleen L; White-Williams, Connie

    2016-01-01

    Few studies have examined the impact of patient weight on heart transplant (HT) outcomes. Nine outcomes were compared in 2 groups of HT recipients (N = 347) based on their mean body mass index (BMI) during the first 3 years post-HT. Group 1 consisted of 108 non-overweight patients (BMI <25; mean age 52; 29.6% females; 16.7% minorities). Group 2 consisted of 239 overweight patients (BMI ≥25; mean age 52; 15.9% females; 13.8% minorities). Outcomes were: survival, re-hospitalization, rejections, infections, cardiac allograft vasculopathy (CAV), stroke, renal dysfunction, diabetes, and lymphoma. Non-overweight patients had shorter survival, were re-hospitalized more days after the HT discharge, and had more lymphoma and severe renal dysfunction. Overweight patients had more CAV, steroid-induced diabetes, and acute rejections. Overweight HT patients had better survival, but more rejections, CAV, and diabetes. Non-overweight HT patients had worse survival, plus more re-hospitalization time, lymphoma, and renal dysfunction. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Oral health of pediatric liver transplant recipients.

    Science.gov (United States)

    Sandoval, Marίa José; Zekeridou, Alkisti; Spyropoulou, Vasiliki; Courvoisier, Delphine; Mombelli, Andrea; McLin, Valérie; Giannopoulou, Catherine

    2017-11-01

    To evaluate oral health conditions in pediatric liver transplant recipients, with special focus on caries, green staining of the teeth, gingival bleeding, and gingival overgrowth. 40 patients (mean age 11.6 years) were examined at a routine follow-up visit, 6 months to 16 years after liver transplantation at the Swiss Center for Liver Disease in Children. After the medical examination, participants were further examined for the presence of dental caries, periodontal disease, GE, and GTC. The mean decay, missing, and filled teeth (dmft/DMFT) score was 3.8. 45% of the participants presented at least one carious lesion. Two-third of the participants had more than 20% of sites with the presence of plaque and gingival inflammation. Signs of GE were found in 18% and GTC in 30% of the participants. A positive correlation was identified between GTC and peak serum bilirubin (PGingival inflammation was associated with plaque (Ppoor oral health status. Liver transplant physicians should counsel patients for regular dental follow-up in order to avoid serious dental infections. © 2017 The Authors. Pediatric Transplantation published by Wiley Periodicals, Inc.

  15. Primary Care of the Solid Organ Transplant Recipient.

    Science.gov (United States)

    Wong, Christopher J; Pagalilauan, Genevieve

    2015-09-01

    Solid organ transplantation (SOT) is one of the major advances in medicine. Care of the SOT recipient is complex and continued partnership with the transplant specialist is essential to manage and treat complications and maintain health. The increased longevity of SOT recipients will lead to their being an evolving part of primary care practice, with ever more opportunities for care, education, and research of this rewarding patient population. This review discusses the overall primary care management of adult SOT recipients. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Wafer-scale patterning of reduced graphene oxide electrodes by transfer-and-reverse stamping for high performance OFETs.

    Science.gov (United States)

    Lee, Joong Suk; Kim, Nam Hee; Kang, Moon Sung; Yu, Hojeong; Lee, Dong Ryoul; Oh, Joon Hak; Chang, Suk Tai; Cho, Jeong Ho

    2013-08-26

    A wafer-scale patterning method for solution-processed graphene electrodes, named the transfer-and-reverse stamping method, is universally applicable for fabricating source/drain electrodes of n- and p-type organic field-effect transistors with excellent performance. The patterning method begins with transferring a highly uniform reduced graphene oxide thin film, which is pre-prepared on a glass substrate, onto hydrophobic silanized (rigid/flexible) substrates. Patterns of the as-prepared reduced graphene oxide films are then formed by modulating the surface energy of the films and selectively delaminating the films using an oxygen-plasma-treated elastomeric stamp with patterns. Reduced graphene oxide patterns with various sizes and shapes can be readily formed onto an entire wafer. Also, they can serve as the source/drain electrodes for benchmark n- and p-type organic field-effect transistors with enhanced performance, compared to those using conventional metal electrodes. These results demonstrate the general utility of this technique. Furthermore, this simple, inexpensive, and scalable electrode-patterning-technique leads to assembling organic complementary circuits onto a flexible substrate successfully. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Experimental study on the warm forming and quenching behavior for hot stamping of high-strength aluminum alloys

    Science.gov (United States)

    Degner, J.; Horn, A.; Merklein, M.

    2017-09-01

    Within the last decades, stringent regulations on fuel consumption, CO2 emissions and product recyclability forced the automotive sector to implement new strategies within the field of car body manufacturing. Due to their low density and good corrosion resistance, aluminum became one of the most relevant lightweight materials. Recently, especially high- strength aluminum alloys for structural components gained importance. Since the low formability of these alloys limits their application, there is a need for novel process strategies in order to enhance the forming behavior. One promising approach is the hot stamping of aluminum alloys. The combination of quenching and forming in one step after solution heat treatment leads to a significant improvement of the formability. Furthermore, higher manufacturing accuracy can be achieved due to reduced spring back. Within this contribution, the influence of forming temperature on the subsequent material behavior and the heat transfer during quenching will be analyzed. Therefore, the mechanical and thermal material characteristics such as flow behavior and heat transfer coefficient during hot stamping are investigated.

  18. A nanoscale conical polymethyl methacrylate (PMMA) sub-wavelength structure with a high aspect ratio realized by a stamping method.

    Science.gov (United States)

    Kim, Dae-Seon; Kim, Dong-Hyun; Jang, Jae-Hyung

    2013-04-08

    A high aspect ratio conical sub-wavelength structure (SWS) was designed by using rigorous coupled-wave analysis (RCWA) method and was realized on polymethyl methacrylate (PMMA) film using a stamping technique. The silicon template containing a hexagonal array of conical holes with a period of 350 nm and an aspect ratio of 2.8 was fabricated by electron-beam (e-beam) lithography followed by a two-step etching process. The SWS with a high aspect ratio was easily transferred from the fabricated silicon template to PMMA film using the stamping method. The replicated PMMA SWS has an array of cones with nanoscale tips and an aspect ratio higher than 2.8. The average reflectance and transmittance of the PMMA film with the conical SWS in the wavelength ranging from 500 and 1500 nm was improved from 7.1 and 91.1% to 4.3 and 94.2%, respectively, as compared to flat PMMA film.

  19. Fracture Profile and Crack Propagation of Ultra-High Strength Hot-Stamped Boron Steel During Mechanical Trimming Process

    Science.gov (United States)

    Han, Xianhong; Yang, Kun; Chen, Sisi; Chen, Jun

    2015-10-01

    Mechanical trimming process for ultra-high strength boron steel after hot stamping was carried out in this study. Shear and tensile tests were designed to analyze the influences of stress state on the fracture mode; trimmed fracture surface and profile were observed and compared to other commonly used steels such as DP980 and Q235 etc.; the crack propagation during trimming process was studied through step-by-step tests. The observation and analysis reveal that the fracture mode of hot-stamped boron steel is highly related to the stress state, it belongs to cleavage fracture on low stress triaxiality but dimple fracture on high stress triaxiality. Such phenomenon is reflected in the trimming process, during which the stress state changes from shear-dominated state to tensile-dominated state. In addition, the burnish zone of trimmed boron steel is much smaller than other high strength steels, and the profile of cutting surface shows an `S'-like shape which is destructive to the trimming tool. Moreover, during the trimming process, most martensite laths near the cutting edge are stretched and rotated markedly to the direction of the shear band, and the main crack expands along those grain boundaries, which may penetrate through a few martensite laths and form small crack branches.

  20. Using Micro-Molding and Stamping to Fabricate Conductive Polydimethylsiloxane-Based Flexible High-Sensitivity Strain Gauges.

    Science.gov (United States)

    Han, Chi-Jui; Chiang, Hsuan-Ping; Cheng, Yun-Chien

    2018-02-18

    In this study, polydimethylsiloxane (PDMS) and conductive carbon nanoparticles were combined to fabricate a conductive elastomer PDMS (CPDMS). A high sensitive and flexible CPDMS strain sensor is fabricated by using stamping-process based micro patterning. Compared with conventional sensors, flexible strain sensors are more suitable for medical applications but are usually fabricated by photolithography, which suffers from a large number of steps and difficult mass production. Hence, we fabricated flexible strain sensors using a stamping-process with fewer processes than photolithography. The piezoresistive coefficient and sensitivity of the flexible strain sensor were improved by sensor pattern design and thickness change. Micro-patterning is used to fabricate various CPDMS microstructure patterns. The effect of gauge pattern was evaluated with ANSYS simulations. The piezoresistance of the strain gauges was measured and the gauge factor determined. Experimental results show that the piezoresistive coefficient of CPDMS is approximately linear. Gauge factor measurement results show that the gauge factor of a 140.0 μm thick strain gauge with five grids is the highest.

  1. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    Science.gov (United States)

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-05-01

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  2. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    International Nuclear Information System (INIS)

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-01-01

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  3. Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

    Science.gov (United States)

    Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

    2018-04-01

    Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

  4. All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp

    DEFF Research Database (Denmark)

    Mikkelsen, Morten Bo Lindholm; Letailleur, Alban A; Søndergård, Elin

    2011-01-01

    We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination of the imprin......We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination...... of the imprinted hybrid sol-gel material produces purely inorganic silica, which has very low autofluorescence and can be fusion bonded to a glass lid. Compared to top-down processing of fused silica or silicon substrates, imprint of sol-gel silica enables fabrication of high-quality nanofluidic devices without...... expensive high-vacuum lithography and etching techniques. The applicability of the fabricated device for single-molecule studies is demonstrated by measuring the extension of DNA molecules of different lengths confined in the nanochannels....

  5. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    Energy Technology Data Exchange (ETDEWEB)

    Dague, E; Jauvert, E; Laplatine, L; Thibault, C [CNRS, LAAS, 7 Avenue du Colonel Roche, F-31077 Toulouse Cedex 4 (France); Viallet, B; Ressier, L, E-mail: edague@laas.fr, E-mail: laurence.ressier@insa-toulouse.fr [Universite de Toulouse, LPCNO, INSA-CNRS-UPS, 135 Avenue de Rangueil, F-31077 Toulouse (France)

    2011-09-30

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  6. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    Science.gov (United States)

    Dague, E.; Jauvert, E.; Laplatine, L.; Viallet, B.; Thibault, C.; Ressier, L.

    2011-09-01

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  7. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    International Nuclear Information System (INIS)

    Dague, E; Jauvert, E; Laplatine, L; Thibault, C; Viallet, B; Ressier, L

    2011-01-01

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  8. Event for the launch of the Georges Charpak postage stamp | 26-27 February | Prévessin site

    CERN Multimedia

    2016-01-01

    At the end of February, the French post office is releasing a new €0.70 stamp featuring an image of Georges Charpak. CERN is taking part in this event by hosting a temporary post office on the Prévessin site, which will sell the stamp with a special “first day” postmark before it goes on general sale.     Georges Charpak arrived at CERN in 1959 and, in the late 1960s, revolutionised particle detection technology by developing the multiwire proportional chamber. This technique brought particle detectors into the electronic era, setting physicists free from the laborious task of studying photographs one by one. In 1992, he was awarded the Nobel Prize in Physics for his invention. Charpak chambers are still used today in the LHC detectors and have paved the way for the technology in numerous other modern detectors. In the 1990s, Charpak was involved in developing medical applications based on particle detection technology. He was als...

  9. Dietary Acid Load and Metabolic Acidosis in Renal Transplant Recipients

    NARCIS (Netherlands)

    Berg, van den Else; Engberink, M.F.; Brink, E.J.; Baak, van M.A.; Joosten, M.M.; Gans, R.O.B.; Navis, G.; Bakker, S.J.L.

    2012-01-01

    Background and objectives Acidosis is prevalent among renal transplant recipients (RTRs) and adversely affects cardiometabolic processes. Factors contributing to acidosis are graft dysfunction and immunosuppressive drugs. Little is known about the potential influence of diet on acidosis in RTRs.

  10. Measles Virus Infection in Pediatric Liver Transplantation Recipients.

    Science.gov (United States)

    Liu, Y; Sun, L-Y; Zhu, Z-J; Lin, W; Qu, W; Zeng, Z-G

    2015-11-01

    This study was conducted to analyze the clinical characteristics and outcome of measles in pediatric liver transplant recipients. This study includes a retrospective data analysis of five pediatric liver transplant recipients with measles who were treated at the Liver Transplant Section, Beijing Friendship Hospital, China, from March to April 2014. The clinical manifestations of measles in pediatric liver transplant recipients were serious. There were three cases complicated with pneumonia, and one with laryngitis. Two cases presented with severe measles pneumonia that developed into severe respiratory failure requiring mechanical ventilation. Four patients recovered after treatment and one patient died of respiratory failure. Pediatric liver transplant recipients with measles are at high risk of severe pneumonia. Measles pneumonitis is frequently fatal to immunocompromised pediatric patients. Treatment should be initiated as soon as possible. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Eco-logical grant recipient peer exchange report

    Science.gov (United States)

    2012-05-15

    On March 21-22, 2012, the Federal Highway Administration (FHWA) Office of Project Development and : Environmental Review sponsored a two-day peer exchange to convene recipients of FHWA Eco-Logical : grants whose projects achieved noteworthy accomplis...

  12. New Onset Diabetes: A Guide for Kidney Transplant Recipients

    Science.gov (United States)

    ... low-fat appetizer. ❖ Ask for substitutions. Instead of french fries, request a double order of a vegetable. ... providing information for this section. 20 A Recipient Speaks Out From Resistance to Resentment to Routine: Living ...

  13. 42 CFR 121.7 - Identification of organ recipient.

    Science.gov (United States)

    2010-10-01

    ... provide to the OPO and to the OPTN the reasons for refusal and shall maintain this document for one year... receipt of an organ, the transplant hospital responsible for the potential recipient's care shall...

  14. Seborrheic dermatitis among Oxford renal transplant recipients.

    Science.gov (United States)

    Lally, A; Casabonne, D; Newton, R; Wojnarowska, F

    2010-05-01

    Seborrheic dermatitis is an inflammatory dermatosis with a prevalence of 1-3% in the general population. It is recognized more commonly in those infected by human immunodeficiency virus (HIV). No studies have looked at Seborrheic dermatitis in the context of immunosuppression secondary to organ transplantation. Therefore, we investigated the prevalence of Seborrheic dermatitis in a renal transplant population and characteristics of those affected. A prospective study of 308 renal transplant recipients (RTRs) was carried out. All participants were examined for Seborrheic dermatitis. Descriptive statistics were employed and associations with Seborrheic dermatitis were examined using Fisher's exact test to calculate P-exact values, and Student's t-test was used to compare mean ages and time since transplantation. Statistical analysis was carried out using SPSS version 14.0 for Windows. Seborrheic dermatitis was identified in 29/308 (9.5%) patients and was more common in males (P-exact = 0.004) and in those who had been transplanted for longer (P = 0.02). The disease was mild-moderate severity in the majority but an unusual flexural appearance was recorded in 7/29 patients. Seborrheic dermatitis was less likely in those taking prednisolone (P-exact = 0.006) or tacrolimus (P-exact = 0.008). Seborrheic dermatitis was significantly associated with cutaneous malignancy, in particular squamous cell carcinoma (P-exact Seborrheic dermatitis is more common than other inflammatory dermatoses in immunosuppressed RTRs, but is not as frequent as in those immunosuppressed secondary to HIV. Degree and duration of exposure to immunosuppression and increased colonization with Malassezia yeast genus are likely be important in the aetiology of Seborrheic dermatitis in RTRs. Further studies are required to clarify this.

  15. Mobile Technology Affinity in Renal Transplant Recipients.

    Science.gov (United States)

    Reber, S; Scheel, J; Stoessel, L; Schieber, K; Jank, S; Lüker, C; Vitinius, F; Grundmann, F; Eckardt, K-U; Prokosch, H-U; Erim, Y

    Medication nonadherence is a common problem in renal transplant recipients (RTRs). Mobile health approaches to improve medication adherence are a current trend, and several medication adherence apps are available. However, it is unknown whether RTRs use these technologies and to what extent. In the present study, the mobile technology affinity of RTRs was analyzed. We hypothesized significant age differences in mobile technology affinity and that mobile technology affinity is associated with better cognitive functioning as well as higher educational level. A total of 109 RTRs (63% male) participated in the cross-sectional study, with an overall mean age of 51.8 ± 14.2 years. The study included the Technology Experience Questionnaire (TEQ) for the assessment of mobile technology affinity, a cognitive test battery, and sociodemographic data. Overall, 57.4% of the patients used a smartphone or tablet and almost 45% used apps. The TEQ sum score was 20.9 in a possible range from 6 (no affinity to technology) to 30 (very high affinity). Younger patients had significantly higher scores in mobile technology affinity. The only significant gender difference was found in having fun with using electronic devices: Men enjoyed technology more than women did. Mobile technology affinity was positively associated with cognitive functioning and educational level. Young adult patients might profit most from mobile health approaches. Furthermore, high educational level and normal cognitive functioning promote mobile technology affinity. This should be kept in mind when designing mobile technology health (mHealth) interventions for RTRs. For beneficial mHealth interventions, further research on potential barriers and desired technologic features is necessary to adapt apps to patients' needs. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Association Between Pretransplant Cancer and Survival in Kidney Transplant Recipients.

    Science.gov (United States)

    Dahle, Dag Olav; Grotmol, Tom; Leivestad, Torbjørn; Hartmann, Anders; Midtvedt, Karsten; Reisæter, Anna V; Mjøen, Geir; Pihlstrøm, Hege K; Næss, Hege; Holdaas, Hallvard

    2017-10-01

    Kidney transplantation in recipients with a previous malignancy is often deferred 2 to 5 years after cancer treatment due to fear of cancer recurrence. In Norway, the required waiting period has been 1 year. We compared patient and graft survival of recipients with pretransplant cancer to the outcomes of matched recipients without such cancer (comparators) using Cox regression. From 1963 to 2010, 377 (6.4%) of 5867 recipients had a pretransplant cancer. During a median follow-up of 6.8 years, 256 recipients died, 35 (13.7%) from recurrent cancer and 27 (10.5%) from de novo cancer. Uncensored and death-censored graft loss occurred in 263 and 46 recipients, respectively. All-cause mortality was similar as in comparators (hazard ratio [HR], 1.06; 95% confidence interval [CI], 0.93-1.20]; P = 0.40), death-censored graft loss was lower (HR, 0.63; 95% CI, 0.47-0.84; P = 0.002), and uncensored graft loss was similar (HR, 0.99; 95% CI, 0.87-1.12; P = 0.87). Cancer mortality was higher than in comparators (HR, 1.97; 95% CI, 1.51-2.56; P cancer mortality or all-cause mortality (both P > 0.45). Results were similar within cancer subgroups, with most data in patients with a history of kidney cancer, prostate cancer, urothelial cancer, and skin squamous cell carcinoma. Kidney transplant recipients with a pretransplant cancer had a similar overall patient and graft survival as recipients without such cancer. Cancer mortality was increased, particularly during the first 5 years after transplantation. A short waiting period was not associated with mortality.

  17. The Association of Long-Functioning Hemodialysis Vascular Access with Prevalence of Left Ventricular Hypertrophy in Kidney Transplant Recipients

    Directory of Open Access Journals (Sweden)

    Aureliusz Kolonko

    2014-01-01

    Full Text Available Left ventricular hypertrophy (LVH is frequently observed in chronic dialysis patients and is also highly prevalent in kidney transplant recipients. This study evaluates the impact of long-functioning hemodialysis vascular access on LVH in single center cohort of kidney transplant recipients. 162 patients at 8.7 ± 1.8 years after kidney transplantation were enrolled. Echocardiography, carotid ultrasound, and assessment of pulse wave velocity were performed. LVH was defined based on left ventricular mass (LVM indexed for body surface area (BSA and height2.7. There were 67 patients with and 95 without patent vascular access. Both study groups were comparable with respect to gender, age, duration of dialysis therapy, and time after transplantation, kidney graft function, and cardiovascular comorbidities. Patients with patent vascular access were characterized by significantly elevated LVM and significantly greater percentage of LVH, based on LVMI/BSA (66.7 versus 48.4%, P=0.02. OR for LVH in patients with patent vascular access was 2.39 (1.19–4.76, P=0.01. Regression analyses confirmed an independent contribution of patent vascular access to higher LVM and increased prevalence of LVH. We concluded that long-lasting patent hemodialysis vascular access after kidney transplantation is associated with the increased prevalence of LVH in kidney transplant recipients.

  18. Enrollment Time as a Requirement for Biometric Hand Recognition Systems

    OpenAIRE

    Carvalho, João; Sá, Vítor; Tenreiro de Magalhães, Sérgio; Santos, Henrique

    2015-01-01

    Biometric systems are increasingly being used as a means for authentication to provide system security in modern technologies. The performance of a biometric system depends on the accuracy, the processing speed, the template size, and the time necessary for enrollment. While much research has focused on the first three factors, enrollment time has not received as much attention. In this work, we present the findings of our research focused upon studying user’s behavior when enrolling in...

  19. Class Origin and Young Adults' Re-Enrollment

    OpenAIRE

    Jacob, Marita; Weiss, Felix

    2011-01-01

    This paper examines re-enrollment decisions taken by adults who have previously participated in the labor market in the US. We investigate the influence of social origin on re-enrollment and test hypotheses based on the "status reproduction" argument. We find that young adults from the lower classes re-enroll less often than those from the upper classes and that these differences can be attributed to a large extend to different ability or performance. Beyond the effects of social origin...

  20. Decreased cerebral blood flow in renal transplant recipients

    International Nuclear Information System (INIS)

    Kamano, Chisako; Komaba, Yuichi; Sakayori, Osamu; Iino, Yasuhiko; Katayama, Yasuo

    2002-01-01

    We performed single-photon emission computed tomography (SPECT) to investigate the influence of renal transplantation on cerebral blood flow (CBF). Fifteen renal transplant recipients and twelve normal subjects underwent cerebral SPECT with N-isopropyl-p-[ 123 I] iodoamphetamine ( 123 I-IMP). All transplant recipients received prednisolone and cyclosporine (CyA). Regional CBF (rCBF) was measured by defining regions of interest in the cerebral cortex, deep white matter, striatum, thalamus, and cerebellum. In transplant recipients, correlations to the mean overall cortical CBF were assessed using the interval from transplantation to measurement of SPECT, as well as the serum creatinine concentration. Moreover, to investigate the influence of CyA on CBF, the correlation between mean overall cortical CBF and CyA trough concentrations was assessed. In all regions, CBF in renal transplant recipients was significantly lower than in normal subjects. No significant correlation was seen between serum creatinine, interval from transplantation, or CyA trough concentrations and mean overall cortical CBF. Renal transplant recipients demonstrated a decrease in CBF, that can have an associated secondary pathology. Therefore, renal transplant recipients may benefit from post-operative MRI or CT. (author)

  1. Recipient design in human communication: simple heuristics or perspective taking?

    Science.gov (United States)

    Blokpoel, Mark; van Kesteren, Marlieke; Stolk, Arjen; Haselager, Pim; Toni, Ivan; van Rooij, Iris

    2012-01-01

    Humans have a remarkable capacity for tuning their communicative behaviors to different addressees, a phenomenon also known as recipient design. It remains unclear how this tuning of communicative behavior is implemented during live human interactions. Classical theories of communication postulate that recipient design involves perspective taking, i.e., the communicator selects her behavior based on her hypotheses about beliefs and knowledge of the recipient. More recently, researchers have argued that perspective taking is computationally too costly to be a plausible mechanism in everyday human communication. These researchers propose that computationally simple mechanisms, or heuristics, are exploited to perform recipient design. Such heuristics may be able to adapt communicative behavior to an addressee with no consideration for the addressee's beliefs and knowledge. To test whether the simpler of the two mechanisms is sufficient for explaining the "how" of recipient design we studied communicators' behaviors in the context of a non-verbal communicative task (the Tacit Communication Game, TCG). We found that the specificity of the observed trial-by-trial adjustments made by communicators is parsimoniously explained by perspective taking, but not by simple heuristics. This finding is important as it suggests that humans do have a computationally efficient way of taking beliefs and knowledge of a recipient into account.

  2. Physical Activity in Kidney Transplant Recipients: A Review.

    Science.gov (United States)

    Takahashi, Ashley; Hu, Susie L; Bostom, Andrew

    2018-02-23

    Physical activity has known health benefits and is associated with reduced cardiovascular risk in the general population. Relatively few data are available for physical activity in kidney transplant recipients. Compared to the general population, physical activity levels are lower overall in kidney recipients, although somewhat higher compared to the dialysis population. Recipient comorbid condition, psychosocial and socioeconomic factors, and long-term immunosuppression use negatively affect physical activity. Physical inactivity in kidney recipients may be associated with reduced quality of life, as well as increased mortality. Interventions such as exercise training appear to be safe in kidney transplant recipients and are associated with improved quality of life and exercise capacity. Additional studies are required to evaluate long-term effects on cardiovascular risk factors and ultimately cardiovascular disease outcomes and patient survival. Currently available data are characterized by wide variability in the interventions and outcome measures investigated in studies, as well as use of small sample-sized cohorts. These limitations highlight the need for larger studies using objective and standardized measures of physical activity and physical fitness in kidney transplant recipients. Copyright © 2018 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  3. Brief 74 Nuclear Engineering Enrollments and Degrees Survey, 2014 Data

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-03-15

    The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014, and enrollments for fall 2014. There are three academic programs new to this year's survey. Thirty-five academic programs reported having nuclear engineering programs during 2014, and data were provided by all thirty-five. The enrollments and degrees data include students majoring in nuclear engineering or in an option program equivalent to a major. Two nuclear engineering programs have indicated that health physics option enrollments and degrees are also reported in the health physics enrollments and degrees survey.

  4. Brief 76 Nuclear Engineering Enrollments and Degrees Survey, 2015 Data

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-03-15

    The 2015 Nuclear Engineering Enrollments and Degrees Survey reports degrees granted between September 1, 2014 and August 31, 2015. Enrollment information refers to the fall term 2015. The enrollments and degrees data comprises students majoring in nuclear engineering or in an option program equivalent to a major. Thirty-five academic programs reported having nuclear engineering programs during 2015, and data was received from all thirty-five programs. The report includes enrollment information on undergraduate students and graduate students and information by degree level for post-graduation plans.

  5. Brief 77 Health Physics Enrollments and Degrees Survey, 2015 Data

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-03-15

    The 2015 Health Physics Enrollments and Degrees Survey reports degrees granted between September 1, 2014 and August 31, 2015. Enrollment information refers to the fall term 2015. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. The enrollments and degrees information comprises students majoring in health physics or in an option program equivalent to a major. The report includes enrollment information on undergraduate students and graduate students and information by degree level for post-graduation plans.

  6. Comparing farmers' market revenue trends before and after the implementation of a monetary incentive for recipients of food assistance.

    Science.gov (United States)

    Freedman, Darcy A; Mattison-Faye, Amy; Alia, Kassandra; Guest, M Aaron; Hébert, James R

    2014-05-22

    We examined the influence of an intervention to increase fruit and vegetable purchases at farmers' markets for recipients of food assistance, Shop N Save (SNS), on revenue trends at a farmers' market located at a federally qualified health center (FQHC) in rural South Carolina. We compared revenue trends for 20 weeks before the intervention (2011) and 20 weeks after (2012). SNS provided one $5 monetary incentive per week to customers spending $5 or more in food assistance at the farmers' market. SNS was available to any farmers' market customer using Supplemental Nutrition Assistance Program (SNAP), Special Supplemental Nutrition Program for Women, Infants, and Children (WIC), and/or Senior or WIC Farmers' Market Nutrition Program (FMNP) vouchers. Sales receipts were recorded for each transaction at the farmers' market to document payment type and the cost of the purchase. All SNS participants completed a one-time enrollment survey. A total of 336 customers self-enrolled in SNS from June through October 2012. Most SNS participants were female, African American, and patients at the FQHC. In total, the use of all forms of food assistance (SNAP, WIC, and FMNP) at the farmers' market increased significantly after the intervention (from 10% before, to 25% after, P = .003). Senior FMNP vouchers and SNAP usage increased the most. Interventions that provide incentives to recipients of food assistance programs at farmers' markets are a viable strategy for increasing food assistance usage and revenue.

  7. Comparing Farmers’ Market Revenue Trends Before and After the Implementation of a Monetary Incentive for Recipients of Food Assistance

    Science.gov (United States)

    Mattison-Faye, Amy; Alia, Kassandra; Guest, M. Aaron; Hébert, James R.

    2014-01-01

    Introduction We examined the influence of an intervention to increase fruit and vegetable purchases at farmers’ markets for recipients of food assistance, Shop N Save (SNS), on revenue trends at a farmers’ market located at a federally qualified health center (FQHC) in rural South Carolina. We compared revenue trends for 20 weeks before the intervention (2011) and 20 weeks after (2012). Methods SNS provided one $5 monetary incentive per week to customers spending $5 or more in food assistance at the farmers’ market. SNS was available to any farmers’ market customer using Supplemental Nutrition Assistance Program (SNAP), Special Supplemental Nutrition Program for Women, Infants, and Children (WIC), and/or Senior or WIC Farmers’ Market Nutrition Program (FMNP) vouchers. Sales receipts were recorded for each transaction at the farmers’ market to document payment type and the cost of the purchase. All SNS participants completed a one-time enrollment survey. Results A total of 336 customers self-enrolled in SNS from June through October 2012. Most SNS participants were female, African American, and patients at the FQHC. In total, the use of all forms of food assistance (SNAP, WIC, and FMNP) at the farmers’ market increased significantly after the intervention (from 10% before, to 25% after, P = .003). Senior FMNP vouchers and SNAP usage increased the most. Conclusion Interventions that provide incentives to recipients of food assistance programs at farmers’ markets are a viable strategy for increasing food assistance usage and revenue. PMID:24854238

  8. 24 CFR 1000.152 - How is the recipient to use criminal conviction information?

    Science.gov (United States)

    2010-04-01

    ... need for the information and who is an authorized officer, employee, or representative of the recipient... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false How is the recipient to use... Activities § 1000.152 How is the recipient to use criminal conviction information? The recipient shall use...

  9. 42 CFR 441.102 - Plan of care for institutionalized recipients.

    Science.gov (United States)

    2010-10-01

    ... include— (1) An initial review of the recipient's medical, psychiatric, and social needs— (i) Within 90... recipient. (2) Periodic review of the recipient's medical, psychiatric, and social needs; (3) A determination, at least quarterly, of the recipient's need for continued institutional care and for alternative...

  10. Clinical significance of surveillance culture in liver transplant recipients.

    Science.gov (United States)

    Kim, Y J; Kim, S I; Jun, Y H; Choi, J Y; Yoon, S K; You, Y-K; Kim, D-G

    2014-04-01

    Routine microbiologic surveillance is a method of infection control, but its clinical significance in transplant recipients is not known. We analyzed microbiologic data to evaluate the influence of cultured microorganisms between the point of surveillance and infectious episodes in liver transplant recipients. We performed surveillance culture for sputum and peritoneal fluid in liver transplant recipients from January 2009 to December 2011, at the time of transplantation (T1), 5 days (T2), and 10 days (T3) postoperatively. Of the 179 recipients, 32.9% had a positive sputum culture result and 37.4% had a positive peritoneal culture result during surveillance. In the culture surveillance of sputum, 37 organisms were isolated from 35 recipients at T1, and the most common organism was Staphylococcus aureus (n = 13). At T2, 45 organisms were isolated from 39 recipients, including Klebsiella pneumoniae (n = 10), S aureus (n = 8), and Acinetobacter baumannii (n = 6). At T3, 18 organisms were isolated from 15 patients, including Stenotrophomonas maltophilia (n = 5) and K pneumonia (n = 4). In the peritoneal fluid, 11 organisms were isolated from 10 recipients at T1, including Pseudomonas aeruginosa (n = 2) and Enterococcus species (n = 2). At T2, 39 organisms were isolated from 36 recipients, including coagulase-negative Staphylococcus species (CNS; n = 8) and Enterococcus species (n = 7). At T3, 54 organisms were isolated from 51 recipients, including CNS (n = 17) and Candida species (n = 8). Among the 59 patients with positive culture results for sputum surveillance, 16.9% developed pneumonia caused by the same organisms. Among the 67 patients with positive peritoneal fluid culture, 16.4% developed an intra-abdominal infection caused by the same organisms cultured. The recipients with positive surveillance culture had a higher risk of pneumonia (20.3% [12/59] vs 1.6% [2/120]; P < .001) and intra-abdominal infection (31.3% [21/67] vs 18.7% [21/112]; P

  11. Cutaneous Manifestations in Renal Transplant Recipients

    Directory of Open Access Journals (Sweden)

    Fatma Elif Demirgüneş

    2008-05-01

    Full Text Available Background and Design: This study is designed to determine the prevalence and the clinical spectrum of skin diseases in renal transplant recipients (RTRs.Material and Method: In this study RTRs who were referred to our department between 2005 and 2007 for dermatologic examination were evaluated. Dermatologic investigation included direct clinical observation and culture or histolopathological investigation when indicated. Patients were divided into three groups: group A, post-transplantation periods £1 year; group B, post-transplantation periods of 1-5 years; and group C, post-transplantation periods >5 years. Results: In this study 88 (M=50, F=38 RTRs were evaluated. The mean age was 37 ± 12 years and the median interval since transplantation was 38.5 months (range=1 month-27 years. Over a 2-year period 298 cutaneous manifestations were identified. Ninety-five immunosuppressive (IS drug-related manifestations were observed in 58 (%65.9 patients and the most common one was acneiform eruption (n=23. Forty (45.5% patients developed cutaneous viral infections, consisting of verruca vulgaris (n=29, herpes zoster (n=9, herpes simplex (n=5, molluscum (n=2 and varicella (n=1 infections. Superficial fungal infections were observed in 35(39.2% patients, most common lesions were dermatophytosis (n = 23 and pityriasis versicolor (n=17. Bacterial infections were observed in 14 (%16 patients, folliculitis was present in 12 of them. Premalignant and malignant lesions were identified in 12 (%13.6 patients, consisting of actinic keratoses (n=9, basal cell carcinoma (n=2, squamous cell carcinoma (n=1 and Kaposi's sarcoma (n=1. There were more premalignant and malignant lesions in patients receiving azathioprine (p=0.002. Cutaneous viral infections were more common in group C (p=0.023 and IS drug-related manifestations were more common in group A (p=0.003. Conclusion: Most common cutaneous manifestation among RTRs was IS drug-related and seen in early post

  12. Recipient Capacity of Tvaeren, a Baltic Bay

    Energy Technology Data Exchange (ETDEWEB)

    Agnedal, P.O.; Bergstroem, S.O.W.

    1966-07-15

    The research station at Studsvik is situated on the Baltic coast and includes several reactors and laboratories, a waste disposal plant serving both the station and waste producers outside Studsvik. A storage plant for irradiated fuel from power reactors has also been built. A total of 850 people are employed. The waste disposal plant was designed for a personnel of 900 using foreign information to correlate waste amounts to personnel. After a delay production has increased at a rate very close to the one expected. The composition of the waste is varied and difficult to predict. Minor amounts of fission products, active corrosion products, and fissile materials have been detected. Most of the waste activity is released to a strait leading into the Bay. Large volumes of water with very low specific activity are released immediately off the coast. Hydrological and dispersion data for the bay are quoted from a paper presented at the symposium mentioned below. The Baltic has brackish water. Both the chemistry and the biology are quite different from those of marine or fresh water recipients. A short description is given of the fauna and flora and important food webs are discussed. The different ways in which man is exposed to radioactivity in waste releases are dependent upon biological accumulation in living organisms and adsorption to dead materials. Fish consumption is the type of exposure which is likely to be the most critical, though it is possible that the exposure from sunbathing and fishing-gear handling could reach similar significance if conservative calculations are used. Accumulation factors from water to fish are given for iron, cobalt,and zinc . Permissible releases have been calculated using relevant accumulation factors. Fission products and corrosion products seem to be of similar significance with regard to possible human exposure. Permission to release liquid waste is granted by water courts in Sweden and operations inspected by special authorities

  13. Recipient Capacity of Tvaeren, a Baltic Bay

    International Nuclear Information System (INIS)

    Agnedal, P.O.; Bergstroem, S.O.W.

    1966-07-01

    The research station at Studsvik is situated on the Baltic coast and includes several reactors and laboratories, a waste disposal plant serving both the station and waste producers outside Studsvik. A storage plant for irradiated fuel from power reactors has also been built. A total of 850 people are employed. The waste disposal plant was designed for a personnel of 900 using foreign information to correlate waste amounts to personnel. After a delay production has increased at a rate very close to the one expected. The composition of the waste is varied and difficult to predict. Minor amounts of fission products, active corrosion products, and fissile materials have been detected. Most of the waste activity is released to a strait leading into the Bay. Large volumes of water with very low specific activity are released immediately off the coast. Hydrological and dispersion data for the bay are quoted from a paper presented at the symposium mentioned below. The Baltic has brackish water. Both the chemistry and the biology are quite different from those of marine or fresh water recipients. A short description is given of the fauna and flora and important food webs are discussed. The different ways in which man is exposed to radioactivity in waste releases are dependent upon biological accumulation in living organisms and adsorption to dead materials. Fish consumption is the type of exposure which is likely to be the most critical, though it is possible that the exposure from sunbathing and fishing-gear handling could reach similar significance if conservative calculations are used. Accumulation factors from water to fish are given for iron, cobalt,and zinc . Permissible releases have been calculated using relevant accumulation factors. Fission products and corrosion products seem to be of similar significance with regard to possible human exposure. Permission to release liquid waste is granted by water courts in Sweden and operations inspected by special authorities

  14. Do Children in Rural Areas Still Have Different Access to Health Care? Results from a Statewide Survey of Oregon's Food Stamp Population

    Science.gov (United States)

    Devoe, Jennifer E.; Krois, Lisa; Stenger, Rob

    2009-01-01

    Purpose: To determine if rural residence is independently associated with different access to health care services for children eligible for public health insurance. Methods: We conducted a mail-return survey of 10,175 families randomly selected from Oregon's food stamp population (46% rural and 54% urban). With a response rate of 31%, we used a…

  15. Use of the Performance Diagnostic Checklist to Select an Intervention Designed to Increase the Offering of Promotional Stamps at Two Sites of a Restaurant Franchise

    Science.gov (United States)

    Rodriguez, Manuel; Wilder, David A.; Therrien, Kelly; Wine, Byron; Miranti, Reylissa; Daratany, Kenneth; Salume, Gloria; Baranovsky, Greg; Rodriquez, Matias

    2006-01-01

    The performance diagnostic checklist (PDC) was administered to examine the variables influencing the offering of promotional stamps by employees at two sites of a restaurant franchise. PDC results suggested that a lack of appropriate antecedents, equipment and processes, and consequences were responsible for the deficits. Based on these results,…

  16. The Confluence of Sociology, Statistics, and Public Policy in the Quality Control of the Food Stamps, AFDC, and Medicaid Family Assistance Programs.

    Science.gov (United States)

    Press, S. James; Tanur, Judith M.

    1991-01-01

    Relevance of the intersection of sociology, statistics, and public policy to the study of quality control in three family assistance programs--food stamps, Aid to Families with Dependent Children (AFDC), and Medicaid--is reviewed using a study by the National Academy of Sciences of methods for improving quality control systems. (SLD)

  17. The comparison of two continuum damage mechanics-based material models for formability prediction of AA6082 under hot stamping conditions

    Science.gov (United States)

    Shao, Z.; Li, N.; Lin, J.

    2017-09-01

    The hot stamping and cold die quenching process has experienced tremendous development in order to obtain shapes of structural components with great complexity in automotive applications. Prediction of the formability of a metal sheet is significant for practical applications of forming components in the automotive industry. Since microstructural evolution in an alloy at elevated temperature has a large effect on formability, continuum damage mechanics (CDM)-based material models can be used to characterise the behaviour of metals when a forming process is conducted at elevated temperatures. In this paper, two sets of unified multi-axial constitutive equations based on material’s stress states and strain states, respectively, were calibrated and used to effectively predict the thermo-mechanical response and forming limits of alloys under complex hot stamping conditions. In order to determine and calibrate the two material models, formability tests of AA6082 using a developed novel biaxial testing system were conducted at various temperatures and strain rates under hot stamping conditions. The determined unified constitutive equations from experimental data are presented in this paper. It is found that both of the stress-state based and strain-state based material models can predict the formability of AA6082 under hot stamping conditions.

  18. Ultrasonography of the brain, abdomen, and heart in neonates born to liver or renal transplant recipient mothers.

    Science.gov (United States)

    Kociszewska-Najman, Bożena; Pietrzak, Bronisława; Schreiber-Zamora, Joanna; Borek-Dzięcioł, Beata; Bobrowska, Katarzyna; Kucińska, Beata; Jabiry-Zieniewicz, Zoulikha; Samaha, Robert; Biejat, Agnieszka; Werner, Bożena; Wielgos, Mirosław

    2012-12-31

    Pregnancies in graft recipients are associated with increased risk of a number of pathologies. The aim of the study was to analyze results of brain and abdominal ultrasonography and echocardiography (ECHO) in neonates born to liver (LTx) or renal recipients (RTx). The study group consisted of 82 neonates born to transplanted women (46 neonates of liver recipients and 36 neonates of renal recipients), enrolled in a retrospective study. The control group consisted of 74 neonates from the general population. Sonographic examination of the brain was performed to check for the presence of intra-/periventricular hemorrhage (IVH/PVH) according to Papile, and periventricular leukomalacia (PVL).The results of abdominal ultrasonography and 2-dimensional echocardiography (ECHO) were compared between the groups. The immunosuppressive therapy used during pregnancy was also analyzed. No significant differences were observed between the frequency of IVH in LTx and RTx groups and LTx, RTx, and control groups. Abdominal ultrasonography revealed 1 case of suprarenal hemorrhage, 1 case of cystic kidney, and 3 cases of pyelocalyceal system dilatation in the study group. There were no abnormalities in the echocardiography in 97.8% of children born to mothers after LTx and in 94.4% after RTx. There were significant differences in the immunosuppressive therapy between the pregnant women after LTx and RTx. The risk was not increased in intra-/periventricular hemorrhage and congenital abnormalities of the gastrointestinal tract and heart in neonates of mothers after organ transplantation, regardless of the immunotherapy used, and risk was similar to that of the general population.

  19. Can We Boost College Summer Enrollment Using Behavioral Science?

    Science.gov (United States)

    MDRC, 2017

    2017-01-01

    MDRC's Center for Applied Behavioral Science (CABS) and Postsecondary Education policy area launched the Encouraging Additional Summer Enrollment (EASE) project in collaboration with Great Lakes Higher Education Corporation & Affiliates and the Ohio Association of Community Colleges. The project aims to increase summer enrollment rates among…

  20. 42 CFR 424.505 - Basic enrollment requirement.

    Science.gov (United States)

    2010-10-01

    ... (CONTINUED) MEDICARE PROGRAM CONDITIONS FOR MEDICARE PAYMENT Requirements for Establishing and Maintaining Medicare Billing Privileges § 424.505 Basic enrollment requirement. To receive payment for covered Medicare.... Once enrolled, the provider or supplier receives billing privileges and is issued a valid billing...

  1. Impact of Incidents on Enrollments at Higher Education Institutions

    Science.gov (United States)

    L'Orange, Hans P.

    2010-01-01

    Higher education is a remarkably consistent enterprise. The same general pattern, by and large, has existed since the enactment of the G.I. Bill in 1944 and large numbers of returning veterans began enrolling in American higher education. Although the definition of a traditional student is changing, many students still enroll in the fall to begin…

  2. Passed to Fail? Predicting the College Enrollment of GED® Passers

    Science.gov (United States)

    Rossi, Rachael J.; Bower, Corey Bunje

    2018-01-01

    Utilizing a data set of over 900,000 enrollees in adult basic education programs in New York State between 2005 and 2013, we examine the college enrollment of GED® passers. Upon enrollment in an adult basic education program, participants were asked whether they wanted to attend college after completion; almost 13,000 students both indicated a…

  3. 7 CFR 1469.6 - Enrollment criteria and selection process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Enrollment criteria and selection process. 1469.6... General Provisions § 1469.6 Enrollment criteria and selection process. (a) Selection and funding of... existing natural resource, environmental quality, and agricultural activity data along with other...

  4. 20 CFR 638.405 - Extensions of enrollment.

    Science.gov (United States)

    2010-04-01

    ....405 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Enrollment, Transfers, Terminations, and Placements in the Job Corps § 638.405 Extensions of enrollment. The center operator shall see that the total...

  5. 20 CFR 638.402 - Enrollment by readmission.

    Science.gov (United States)

    2010-04-01

    ... 638.402 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Enrollment, Transfers, Terminations, and Placements in the Job Corps § 638.402 Enrollment by readmission. Procedures for screening and selection of...

  6. Parental Education and Public Reason: Why Comprehensive Enrolment Is Justified

    Science.gov (United States)

    Giesinger, Johannes

    2013-01-01

    Matthew Clayton claims that "comprehensive enrolment"--raising one's children in accordance with one's own conception of the good--is illegitimate. In his argument against comprehensive enrolment, Clayton refers to Rawls's idea of public reason. In a recent response to Clayton, Christina Cameron not only rejects…

  7. 42 CFR 460.160 - Continuation of enrollment.

    Science.gov (United States)

    2010-10-01

    ... of enrollment. Enrollment continues until the participant's death, regardless of changes in health... level of care required under the State Medicaid plan for coverage of nursing facility services. (1... participant no longer meets the State Medicaid nursing facility level of care requirements, the participant...

  8. Effects of the Subsidized Students' Loan on University Enrolment in ...

    African Journals Online (AJOL)

    This paper examines the effect of the subsidized students' loan on university enrolment in Ghana between 1988-2008 using the autoregressive distributed lag (ARDL) framework. It was discovered that the subsidized student loan had positive and significant impact on university enrolment. Per capita gross domestic product ...

  9. Massachusetts health reform and Veterans Affairs health system enrollment.

    Science.gov (United States)

    Wong, Edwin S; Maciejewski, Matthew L; Herbert, Paul L; Bryson, Christopher L; Liu, Chuan-Fen

    2014-08-01

    Veterans Health Administration (VA) operates the largest integrated health system in the nation. The Affordable Care Act (ACA) does not require any changes to VA, but the individual mandate and expanded health insurance options may change veterans' preferences for coverage. We examined the impact of healthcare reform in Massachusetts, which also included these policy changes, on veterans' enrollment in VA, private insurance, and Medicaid. Massachusetts' healthcare reform in June 2006 served as a natural experiment. Using data from the 2004-2013 Current Population Surveys, we examined enrollment in VA, private insurance, and Medicaid, comparing veterans residing in Massachusetts with veterans residing in neighboring New England states that did not undergo health reform. We estimated the probability of being enrolled in VA, private insurance, and Medicaid before and after healthcare reform, using multivariate probit models while adjusting for individual characteristics. Using a difference-in-difference approach, we compared pre-post changes in enrollment probability among Massachusetts and non-Massachusetts veterans, respectively. Compared with other New England veterans, Massachusetts veterans decreased their enrollment in VA and private insurance by 0.2 (P = .857) and 0.9 (P = .666) percentage points, respectively, following health reform. In contrast, Medicaid enrollment increased by 2.5 percentage points (P = .038). Healthcare reform in Massachusetts was associated with greater Medicaid enrollment, but was not significantly associated with VA and private insurance enrollment. Our results are significant for informing VA fiscal planning in the post ACA era.

  10. Efficacy of Dual Enrollment in Rural Southwest Virginia

    Science.gov (United States)

    Carter, Karen Glass

    2009-01-01

    The intent of this dissertation was to determine if enrollment into a career and technical education dual enrollment program encouraged students to continue their education into postsecondary education and if workplace readiness skills were increased. This study completed a factorial analysis of student demographic and factorial data as associated…

  11. Access to Dual Enrollment Courses and School-Level Characteristics

    Science.gov (United States)

    Pretlow, Joshua; Wathington, Heather

    2013-01-01

    Increasing the percentage of adults with a college credential is paramount to sustaining our economic competitiveness. One strategy that has potential to help achieve the goal of increased postsecondary degree production is dual enrollment, which allows high school students to enroll in college-level courses for credit that can be applied…

  12. A Global Connection: Foreign Enrollment, International Education and World Trade.

    Science.gov (United States)

    Hoy, John C.

    1996-01-01

    New England is experiencing globalization at a rapid pace, including enrollment of foreign college and university students. If the area is to reap the economic and cultural advantages of foreign enrollment, it must maintain a hospitable climate for both foreign trade and foreign students. This process can be enhanced by the admissions and alumni…

  13. The Brave New World of Strategic Enrollment Management

    Science.gov (United States)

    Bontrager, Bob

    2007-01-01

    The practice of strategic enrollment management (SEM) can be likened to navigating a ship through uncharted waters. Dating back to the 1970s, the very concept of enrollment management came into being and has since evolved in the face of a steady progression of daunting challenges requiring repeated course corrections. A massive demographic…

  14. The Impact of Business Cycle Fluctuations on Graduate School Enrollment

    Science.gov (United States)

    Johnson, Matthew T.

    2013-01-01

    This paper adds to the understanding of student decisions about graduate school attendance by studying the magnitude of the effect of business cycle fluctuations on enrollment. I use data on graduate school enrollment from the Current Population Survey and statewide variation in unemployment rates across time to proxy for changes in business cycle…

  15. Cost, Quality, and the Community College Enrollment Decision

    Science.gov (United States)

    Swiger, Caroline Martin

    2014-01-01

    Numerous studies model whether students enroll in higher education, but few have investigated how students decide where to attend. Even fewer studies have considered how community college students make this nearly first noncompulsory human capital investment decision. This research focuses on the enrollment decisions of students whose first…

  16. Factors Affecting Students' Enrolment and Dropout at The Open ...

    African Journals Online (AJOL)

    Factors affecting student enrolment and dropout were identified at OUT Lindi Region with strategies for increasing enrolment while reducing dropout. Quantitative and qualitative methods that involved documentary survey, questionnaires and interviews were used to collect the data. The data were analyzed by Statistix ...

  17. Enrollment in Texas Public Schools, 2014-15

    Science.gov (United States)

    Texas Education Agency, 2016

    2016-01-01

    This report provides information on enrollment in the Texas public school system from the 2004-05 through 2014-15 school years, based on data collected through the Texas Public Education Information Management System. Enrollment data are provided by grade, race/ethnicity, gender, and economically disadvantaged status, and for special populations…

  18. Enrollment in Texas Public Schools, 2016-17

    Science.gov (United States)

    Texas Education Agency, 2017

    2017-01-01

    This report provides information on enrollment in the Texas public school system from the 2006-07 through 2016-17 school years, based on data collected through the Texas Student Data System. Enrollment data are provided by grade, race/ethnicity, gender, and economically disadvantaged status, and for special populations and instructional programs.…

  19. Enrollment in Texas Public Schools, 2015-16

    Science.gov (United States)

    Texas Education Agency, 2016

    2016-01-01

    This report provides information on enrollment in the Texas public school system from the 2005-06 through 2015-16 school years, based on data collected through the Texas Public Education Information Management System. Enrollment data are provided by grade, race/ethnicity, gender, and economically disadvantaged status, and for special populations…

  20. Enrolment on Health Insurance Scheme in Ghana: Evidence from ...

    African Journals Online (AJOL)

    Enrolment on Health Insurance Scheme in Ghana: Evidence from Mfantseman Municipality. S Sekyi, Peter B Aglobitse, Johnson Addai-Asante. Abstract. The study aimed at analysing the determinants of enrolment in the Ghana's national health insurance scheme. This survey was carried out to collect cross-sectional ...

  1. Motivation for Enrolment and Influence of Postgraduate Study ...

    African Journals Online (AJOL)

    Motivation for Enrolment and Influence of Postgraduate Study Programme on Career Satisfaction among Agriculture Students in Southwestern Nigeria. ... and the need to meet requirements for choice career/job (mean=3.09) ranked as the major factors influencing enrolment for postgraduate programme among respondents ...

  2. What You Need To Know About Enrollment Management.

    Science.gov (United States)

    Lapovsky, Lucie

    1999-01-01

    Provides basic information that a college or university chief financial officer (CFO) must know about enrollment management in order to understand how to work effectively with admissions and financial aid professionals to maximize tuition revenue and enroll the optimal class. Specific suggestions for CFO involvement are outlined. (Author/MSE)

  3. 38 CFR 21.4202 - Overcharges; restrictions on enrollments.

    Science.gov (United States)

    2010-07-01

    ... VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Administration of Educational Assistance Programs Schools § 21.4202 Overcharges; restrictions on enrollments. (a)-(b) [Reserved] (c) Restrictions; proprietary schools. Enrollment will not be approved for any veteran or eligible person under the...

  4. Relationships Affecting Enrollment Using Social, Economic, and Academic Data

    Science.gov (United States)

    Britton, R. Jason

    2012-01-01

    The process of strategically planning enrollment in higher education, particularly at private institutions has seen tremendous changes in a short period of time. Changes in perspectives toward the value of a college degree, along with economic and social factors, have contributed to the difficulty of discovering relationships affecting enrollment.…

  5. Profiles of blood and blood component transfusion recipients in Zimbabwe

    Science.gov (United States)

    Mafirakureva, Nyashadzaishe; Khoza, Star; Hassall, Oliver; Faragher, Brian E.; Kajja, Isaac; Mvere, David A.; Emmanuel, Jean C.; Postma, Maarten J.; van Hulst, Marinus

    2015-01-01

    Background There are limited published data on the characteristics of blood transfusion recipients in sub-Saharan Africa. This study describes the demographic characteristics of blood transfusion recipients and patterns of blood and blood component use in Zimbabwe. Materials and methods Data on the characteristics of the blood transfusion recipients (age, sex, blood group), blood components received (type, quantity), discharge diagnoses and outcomes following transfusion (discharge status, duration of stay in hospital), were retrospectively collected from four major hospitals for the period from January 1, 2012 to December 31, 2012. Diagnoses were grouped into broad categories according to the disease headings of the International Classification of Diseases (ICD-10). Surgical procedures were grouped into broad categories according to organ system using ICD-9. Results Most of the 1,793 transfusion recipients studied were female (63.2%) and in the reproductive age group, i.e. 15–49 years (65.3%). The median age of the recipients was 33 years (range, 0–93). The majority of these recipients (n=1,642; 91.6%) received a red blood cell transfusion. The majority of the patients were diagnosed with conditions related to pregnancy and childbirth (22.3%), and diseases of blood and blood-forming organs (17.7%). The median time spent in hospital was 8 days (range, 0–214) and in-hospital mortality was 15.4%. Discussion Our sample of blood transfusion recipients were fairly young and most of them received red blood cell transfusions. The majority of patients in the reproductive age group received blood transfusions for pregnancy and childbirth-related diagnoses. PMID:26192782

  6. Lung Cancer Prognosis in Elderly Solid Organ Transplant Recipients.

    Science.gov (United States)

    Sigel, Keith; Veluswamy, Rajwanth; Krauskopf, Katherine; Mehrotra, Anita; Mhango, Grace; Sigel, Carlie; Wisnivesky, Juan

    2015-10-01

    Treatment-related immunosuppression in organ transplant recipients has been linked to increased incidence and risk of progression for several malignancies. Using a population-based cancer cohort, we evaluated whether organ transplantation was associated with worse prognosis in elderly patients with non-small cell lung cancer (NSCLC). Using the Surveillance, Epidemiology, and End Results Registry linked to Medicare claims, we identified 597 patients aged 65 years or older with NSCLC who had received organ transplants (kidney, liver, heart, or lung) before cancer diagnosis. These cases were compared to 114,410 untransplanted NSCLC patients. We compared overall survival (OS) by transplant status using Kaplan-Meier methods and Cox regression. To account for an increased risk of non-lung cancer death (competing risks) in transplant recipients, we used conditional probability function (CPF) analyses. Multiple CPF regression was used to evaluate lung cancer prognosis in organ transplant recipients while adjusting for confounders. Transplant recipients presented with earlier stage lung cancer (P = 0.002) and were more likely to have squamous cell carcinoma (P = 0.02). Cox regression analyses showed that having received a non-lung organ transplant was associated with poorer OS (P transplantation was associated with no difference in prognosis. After accounting for competing risks of death using CPF regression, no differences in cancer-specific survival were noted between non-lung transplant recipients and nontransplant patients. Non-lung solid organ transplant recipients who developed NSCLC had worse OS than nontransplant recipients due to competing risks of death. Lung cancer-specific survival analyses suggest that NSCLC tumor behavior may be similar in these 2 groups.

  7. Long-term pulmonary infections in heart transplant recipients.

    Science.gov (United States)

    Küpeli, Elif; Ulubay, Gaye; Akkurt, Esma Sevil; Öner Eyüboğlu, Füsun; Sezgin, Atilla

    2015-04-01

    Pulmonary infections are life-threatening complications in heart transplant recipients. Our aim was to evaluate long-term pulmonary infections and the effect of prophylactic antimicrobial strategies on time of occurrence of pulmonary infections in heart transplant recipients. Patients who underwent heart transplantation between 2003 and 2013 at Baskent University were reviewed. Demographic information and data about immunosuppression and infectious episodes were collected. In 82 heart transplant recipients (mean age, 33.85 y; 58 male and 24 female), 13 recipients (15.8%) developed pulmonary infections (mean age, 44.3 y; 9 male and 4 female). There were 12 patients who had dilated cardiomyopathy and 1 patient who had myocarditis before heart transplantation; 12 patients received immunosuppressive therapy in single or combination form. Pulmonary infections developed in the first month (1 patient), from first to third month (6 patients), from third to sixth month (1 patient), and > 6 months after transplantation (5 patients). Chest computed tomography showed consolidation (unilateral, 9 patients; bilateral, 4 patients). Multiple nodular consolidations were observed in 2 patients and a cavitary lesion was detected in 1 patient. Bronchoscopy was performed in 6 patients; 3 patients had Aspergillus fumigatus growth in bronchoalveolar lavage fluid, and 2 patients had Acinetobacter baumannii growth in sputum. Treatment was empiric antibiotics (6 patients), antifungal drugs (5 patients), and both antibiotics and antifungal drugs (2 patients); treatment period was 1-12 months in patients with invasive pulmonary aspergillosis. Pulmonary infections are the most common cause of mortality in heart transplant recipients. A. fumigatus is the most common opportunistic pathogen. Heart transplant recipients with fever and cough should be evaluated for pulmonary infections, and invasive pulmonary aspergillosis should be suspected if these symptoms occur within the first 3 months

  8. Recent Enrollment Trends in American Soil Science Programs

    Science.gov (United States)

    Brevik, Eric C.; Abit, Sergio; Brown, David; Dolliver, Holly; Hopkins, David; Lindbo, David; Manu, Andrew; Mbila, Monday; Parikh, Sanjai J.; Schulze, Darrell; Shaw, Joey; Weil, Ray; Weindorf, David

    2015-04-01

    Soil science student enrollment was on the decline in the United States from the early 1990s through the early 2000s. Overall undergraduate student enrollment in American colleges and universities rose by about 11% over the same time period. This fact created considerable consternation among the American soil science community. As we head into the International Year of Soil, it seemed to be a good time to revisit this issue and examine current enrollment trends. Fourteen universities that offer undergraduate and/or graduate programs in soil science were surveyed for their enrollments over the time period 2007-2014 (the last seven academic years). The 14 schools represent about 20% of the institutions that offer soil science degrees/programs in the United States. Thirteen institutions submitted undergraduate data and 10 submitted graduate data, which was analyzed by individual institution and in aggregate. Simple linear regression was used to find the slope of best-fit trend lines. For individual institutions, a slope of ≥ 0.5 (on average, the school gained 0.5 students per year or more) was considered to be growing enrollment, ≤ -0.5 was considered shrinking enrollment, and between -0.5 and 0.5 was considered to be stable enrollment. For aggregated data, the 0.5 slope standard was multiplied by the number of schools in the aggregated survey to determine whether enrollment was growing, shrinking, or stable. Over the period of the study, six of the 13 schools reporting undergraduate data showed enrollment gains, five of the 13 showed stable enrollments, one of the 13 showed declining enrollments, and one of the 13 discontinued their undergraduate degree program. The linear regression trend line for the undergraduate schools' composite data had a slope of 55.0 students/year (R2 = 0.96), indicating a strong overall trend of undergraduate enrollment growth at these schools. However, the largest school had also seen large growth in enrollment. To ensure that this one

  9. Stable Atlas-based Mapped Prior (STAMP) machine-learning segmentation for multicenter large-scale MRI data.

    Science.gov (United States)

    Kim, Eun Young; Magnotta, Vincent A; Liu, Dawei; Johnson, Hans J

    2014-09-01

    Machine learning (ML)-based segmentation methods are a common technique in the medical image processing field. In spite of numerous research groups that have investigated ML-based segmentation frameworks, there remains unanswered aspects of performance variability for the choice of two key components: ML algorithm and intensity normalization. This investigation reveals that the choice of those elements plays a major part in determining segmentation accuracy and generalizability. The approach we have used in this study aims to evaluate relative benefits of the two elements within a subcortical MRI segmentation framework. Experiments were conducted to contrast eight machine-learning algorithm configurations and 11 normalization strategies for our brain MR segmentation framework. For the intensity normalization, a Stable Atlas-based Mapped Prior (STAMP) was utilized to take better account of contrast along boundaries of structures. Comparing eight machine learning algorithms on down-sampled segmentation MR data, it was obvious that a significant improvement was obtained using ensemble-based ML algorithms (i.e., random forest) or ANN algorithms. Further investigation between these two algorithms also revealed that the random forest results provided exceptionally good agreement with manual delineations by experts. Additional experiments showed that the effect of STAMP-based intensity normalization also improved the robustness of segmentation for multicenter data sets. The constructed framework obtained good multicenter reliability and was successfully applied on a large multicenter MR data set (n>3000). Less than 10% of automated segmentations were recommended for minimal expert intervention. These results demonstrate the feasibility of using the ML-based segmentation tools for processing large amount of multicenter MR images. We demonstrated dramatically different result profiles in segmentation accuracy according to the choice of ML algorithm and intensity

  10. Donor-Recipient Weight and Sex Mismatch and the Risk of Graft Loss in Renal Transplantation.

    Science.gov (United States)

    Miller, Amanda J; Kiberd, Bryce A; Alwayn, Ian P; Odutayo, Ayo; Tennankore, Karthik K

    2017-04-03

    Relatively smaller kidney donor to recipient size is proposed to result in higher graft loss due to nephron underdosing and hyperfiltration injury, but the potentially additive effect of sex and weight mismatch has not been explored in detail. The purpose of this study was to determine if concurrent donor and recipient absolute weight and sex mismatch was associated with graft loss in a cohort of deceased donor kidney transplant recipients. The association of kidney donor and recipient absolute weight and sex difference with death-censored graft loss was explored using a cohort of United States deceased donor recipients between 2000 and 2014 through the Scientific Registry of Transplants Recipients. Donor-recipient sex pairings (male donor-male recipient; female donor-female recipient; male donor-female recipient; female donor-male recipient) were further stratified by donor and recipient absolute weight difference (>30 or 10-30 kg [donorrecipient] or mismatch (30 kg larger than donor (hazard ratio, 1.50; 95% confidence interval, 1.32 to 1.70; hazard ratio, 1.35; 95% confidence interval, 1.25 to 1.45, respectively). A concurrent mismatch in donor-recipient weight (donor<recipient) and donor-recipient sex is associated with a higher risk of death-censored graft loss in kidney transplantation. Copyright © 2017 by the American Society of Nephrology.

  11. Recipient characteristics and morbidity and mortality after liver transplantation.

    Science.gov (United States)

    Asrani, Sumeet K; Saracino, Giovanna; O'Leary, Jacqueline G; Gonzales, Stevan; Kim, Peter T; McKenna, Greg J; Klintmalm, Goran; Trotter, James

    2018-02-15

    Over the last decade, liver transplantation of sicker, older non-hepatitis C cirrhotics with multiple co-morbidities has increased in the United States. We sought to identify an easily applicable set of recipient factors among HCV negative adult transplant recipients associated with significant morbidity and mortality within five years after liver transplantation. We collected national (n = 31,829, 2002-2015) and center-specific data. Coefficients of relevant recipient factors were converted to weighted points and scaled from 0-5. Recipient factors associated with graft failure included: ventilator support (five patients; hazard ratio [HR] 1.59; 95% CI 1.48-1.72); recipient age >60 years (three patients; HR 1.29; 95% CI 1.23-1.36); hemodialysis (three patients; HR 1.26; 95% CI 1.16-1.37); diabetes (two patients; HR 1.20; 95% CI 1.14-1.27); or serum creatinine ≥1.5 mg/dl without hemodialysis (two patients; HR 1.15; 95% CI 1.09-1.22). Graft survival within five years based on points (any combination) was 77.2% (0-4), 69.1% (5-8) and 57.9% (>8). In recipients with >8 points, graft survival was 42% (model for end-stage liver disease [MELD] score recipients receiving grafts from donors with a donor risk index >1.7. In center-specific data within the first year, subjects with ≥5 points (vs. 0-4) had longer hospitalization (11 vs. 8 days, p need to be reassessed. The proposed clinical tool may be helpful for center-specific assessment of risk of graft failure in non-HCV patients and for discussion regarding relevant morbidity in selected subsets. Over the last decade, liver transplantation of sicker, older patient with multiple co-morbidities has increased. In this study, we show that a set of recipient factors (recipient age >60 years, ventilator status, diabetes, hemodialysis and creatinine >1.5 mg/dl) can help identify patients that may not do well after transplant. Transplanting sicker organs in patients with certain combinations of these

  12. Perceptual Learning and Auditory Training in Cochlear Implant Recipients

    Science.gov (United States)

    Fu, Qian-Jie; Galvin, John J.

    2007-01-01

    Learning electrically stimulated speech patterns can be a new and difficult experience for cochlear implant (CI) recipients. Recent studies have shown that most implant recipients at least partially adapt to these new patterns via passive, daily-listening experiences. Gradually introducing a speech processor parameter (eg, the degree of spectral mismatch) may provide for more complete and less stressful adaptation. Although the implant device restores hearing sensation and the continued use of the implant provides some degree of adaptation, active auditory rehabilitation may be necessary to maximize the benefit of implantation for CI recipients. Currently, there are scant resources for auditory rehabilitation for adult, postlingually deafened CI recipients. We recently developed a computer-assisted speech-training program to provide the means to conduct auditory rehabilitation at home. The training software targets important acoustic contrasts among speech stimuli, provides auditory and visual feedback, and incorporates progressive training techniques, thereby maintaining recipients’ interest during the auditory training exercises. Our recent studies demonstrate the effectiveness of targeted auditory training in improving CI recipients’ speech and music perception. Provided with an inexpensive and effective auditory training program, CI recipients may find the motivation and momentum to get the most from the implant device. PMID:17709574

  13. Tuberculosis in a renal allograft recipient presenting with intussusception.

    Science.gov (United States)

    Mohapatra, A; Basu, G; Sen, I; Asirvatham, R; Michael, J S; Pulimood, A B; John, G T

    2012-01-01

    Extra-pulmonary tuberculosis (TB) is more common in renal allograft recipients and may present with dissemination or an atypical features. We report a renal allograft recipient with intestinal TB presenting 3 years after transplantation with persistent fever, weight loss, diarrhea, abdominal pain and mass in the abdomen with intestinal obstruction. He was diagnosed to be having an ileocolic intussusception which on resection showed a granulomatous inflammation with presence of acid-fast bacilli (AFB) typical of Mycobacterium tuberculosis. In addition, AFB was detected in the tracheal aspirate, indicating dissemination. He received anti-TB therapy (ATT) from the fourth postoperative day. However, he developed a probable immune reconstitution inflammatory syndrome (IRIS) with multiorgan failure and died on 11(th) postoperative day. This is the first report of intestinal TB presenting as intussusception in a renal allograft recipient. The development of IRIS after starting ATT is rare in renal allograft recipients. This report highlights the need for a high index of suspicion for diagnosing TB early among renal transplant recipients and the therapeutic dilemma with overwhelming infection and development of IRIS upon reduction of immunosuppression and starting ATT.

  14. Influenza vaccination and humoral alloimmunity in solid organ transplant recipients.

    Science.gov (United States)

    Vermeiren, Pieter; Aubert, Vincent; Sugamele, Rocco; Aubert, John-David; Venetz, Jean-Pierre; Meylan, Pascal; Pascual, Manuel; Manuel, Oriol

    2014-09-01

    Annual influenza vaccination is recommended in solid organ transplant (SOT) recipients. However, concerns have been raised about the impact of vaccination on antigraft alloimmunity. We evaluated the humoral alloimmune responses to influenza vaccination in a cohort of SOT recipients between October 2008 and December 2011. Anti-HLA antibodies were measured before and 4-8 weeks after influenza vaccination using a solid-phase assay. Overall, 169 SOT recipients were included (kidney = 136, lung = 26, liver = 3, and combined = 4). Five (2.9%) of 169 patients developed de novo anti-HLA antibodies after vaccination, including one patient who developed donor-specific antibodies (DSA) 8 months after vaccination. In patients with pre-existing anti-HLA antibodies, median MFI was not significantly different before and after vaccination (P = 0.73 for class I and P = 0.20 for class II anti-HLA antibodies) and no development of de novo DSA was observed. Five episodes of rejection (2.9%) were observed within 12 months after vaccination, and only one patient had de novo anti-HLA antibodies. The incidence of development of anti-HLA antibodies after influenza vaccination in our cohort of SOT recipients was very low. Our findings indicate that influenza vaccination is safe and does not trigger humoral alloimmune responses in SOT recipients. © 2014 Steunstichting ESOT.

  15. Invasive fungal infections in renal transplant recipients: about 11 cases.

    Science.gov (United States)

    Trabelsi, H; Néji, S; Sellami, H; Yaich, S; Cheikhrouhou, F; Guidara, R; Charffedine, K; Makni, F; Hachicha, J; Ayadi, A

    2013-12-01

    Invasive fungal infections are a major complication and an important cause of morbidity and mortality among solid organ transplant recipients. Their diagnosis is difficult and their prognosis is often pejorative. The aim of this study was to report the cases of invasive fungal infections in renal transplant recipients in Habib Bourguiba Sfax university hospital and to identify the main fungal agents. It is a retrospective study of invasive fungal infections in renal transplant recipient reported in our hospital from January 1995 to February 2013. Invasive fungal infections were diagnosed in 11 cases (3.4%) among 321 renal transplant recipients. These infections included four cases of pneumocystosis, two cases of candidiasis, two cases of aspergillosis, two cases of cryptococcosis and one case of mucormycosis. There were six men and five women. The mean age was 37 years. The infection was late in 63% of cases (>3 months after transplantation). The prolonged corticosteroid and immunosuppressive therapy were the main risk factors (100%) followed by renal failure (45%), graft rejection (45%), broad spectrum antibiotics (45%), CMV infection (36%), neutropenia (36%) and dialysis (18%). The evolution under treatment was favourable only in two cases (18%). Invasive fungal infections are not common among kidney transplant recipients. However, they remain an important cause of morbidity and mortality in this group of patients. Prevention, early diagnosis and appropriate management are necessary to improve prognosis and reduce mortality rate. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  16. Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as a Forensic Method to Determine the Composition of Inks Used to Print the United States One-cent Blue Benjamin Franklin Postage Stamps of the 19th Century.

    Science.gov (United States)

    Brittain, Harry G

    2016-01-01

    Through the combined use of infrared (IR) absorption spectroscopy and attenuated total reflectance (ATR) sampling, the composition of inks used to print the many different types of one-cent Benjamin Franklin stamps of the 19th century has been established. This information permits a historical evaluation of the formulations used at various times, and also facilitates the differentiation of the various stamps from each other. In two instances, the ink composition permits the unambiguous identification of stamps whose appearance is identical, and which (until now) have only been differentiated through estimates of the degree of hardness or softness of the stamp paper, or through the presence or absence of a watermark in the paper. In these instances, the use of ATR Fourier transform infrared spectroscopy (FT-IR) spectroscopy effectively renders irrelevant two 100-year-old practices of stamp identification. Furthermore, since the use of ATR sampling makes it possible to obtain the spectrum of a stamp still attached to its cover, it is no longer necessary to identify these blue Franklin stamps using their cancellation dates. © The Author(s) 2015.

  17. Towards Improving the Transfer of Care of Kidney Transplant Recipients.

    Science.gov (United States)

    Gill, J S; Wright, A J; Delmonico, F L; Newell, K A

    2017-01-01

    Kidney transplant recipients require specialized medical care and may be at risk for adverse health outcomes when their care is transferred. This document provides opinion-based recommendations to facilitate safe and efficient transfers of care for kidney transplant recipients including minimizing the risk of rejection, avoidance of medication errors, ensuring patient access to immunosuppressant medications, avoidance of lapses in health insurance coverage, and communication of risks of donor disease transmission. The document summarizes information to be included in a medical transfer document and includes suggestions to help the patient establish an optimal therapeutic relationship with their new transplant care team. The document is intended as a starting point towards standardization of transfers of care involving kidney transplant recipients. © Copyright 2016 The American Society of Transplantation and the American Society of Transplant Surgeons.

  18. Antibody induction versus corticosteroid induction for liver transplant recipients

    DEFF Research Database (Denmark)

    Penninga, Luit; Wettergren, André; Wilson, Colin H

    2014-01-01

    . OBJECTIVES: To assess the benefits and harms of T-cell specific antibody induction versus corticosteroid induction for prevention of acute rejection in liver transplant recipients. SEARCH METHODS: We searched The Cochrane Hepato-Biliary Group Controlled Trials Register, the Cochrane Central Register...... to identify additional trials. SELECTION CRITERIA: We included all randomised clinical trials assessing immunosuppression with T-cell specific antibody induction versus corticosteroid induction in liver transplant recipients. Our inclusion criteria stated that participants within each included trial should...... (bias) using bias risk domains with definitions. We used trial sequential analysis to control for random errors (play of chance). MAIN RESULTS: We included 10 randomised trials with a total of 1589 liver transplant recipients, which studied the use of T-cell specific antibody induction versus...

  19. Depicted welfare recipient stereotypes in Norway and Denmark

    DEFF Research Database (Denmark)

    Dencker-Larsen, Sofie; Lundberg, Kjetil G.

    2016-01-01

    Welfare recipients are continuously subjected to media debates and governmental campaigns drawing on images and symbols encouraging improved work ethic and individual responsibility. Only few studies, however, have analysed how welfare recipients as ‘othered’ citizens react to these often...... stereotypical symbols and images targeting them. In this study we have investigated how welfare recipients in Norway and Denmark, and caseworkers in Denmark, understand and account for images which, through the use of stereotypes, directly or indirectly may question welfare recipients’ work ethic...... and deservedness. Analysing photo-elicitation interview data, we have uncovered a variety of reactions characterized by ‘problematization’. The interviewees problematize the image and depicted stereotypes, which they link both with motif and symbols and with surrounding public debates on the work ethic...

  20. Depicted welfare-recipient stereotypes in Norway and Denmark

    DEFF Research Database (Denmark)

    Dencker-Larsen, Sofie; Lundberg, Kjetil G.

    2016-01-01

    Welfare recipients are continuously subjected to media debates and governmental campaigns drawing on images and symbols encouraging improved work ethic and individual responsibility. Only few studies, however, have analysed how welfare recipients as ‘othered’ citizens react to these often...... stereotypical symbols and images targeting them. In this study we have investigated how welfare recipients in Norway and Denmark, and caseworkers in Denmark, understand and account for images which, through the use of stereotypes, directly or indirectly may question welfare recipients’ work ethic...... and deservedness. Analysing photo-elicitation interview data, we have uncovered a variety of reactions characterized by ‘problematization’. The interviewees problematize the image and depicted stereotypes, which they link both with motif and symbols and with surrounding public debates on the work ethic...

  1. International students' enrollment in IPTA by using multilevel analysis

    Science.gov (United States)

    Wai, Phoong Seuk; Ismail, Mohd Tahir; Karim, Samsul Ariffin Abdul

    2012-09-01

    The increases of demand on knowledge-based and production-based market force the growth of higher education. International students' enrollment contributes to economic growth and increase country's income, university reputation and name; promote the competitive of education and training markets. This paper used multilevel analysis to study the international students' enrollment in Malaysia public university. Student's background variables and institution background variables were study in this paper and the relationship among them also been investigated. Result shows that institution type is a significance factor on international students' enrollment in Malaysia public university.

  2. QUALITY OF LIFE EVALUATION IN RECIPIENTS AFTER KIDNEY TRANSPLANTATION

    Directory of Open Access Journals (Sweden)

    E. P. Volynchik

    2009-01-01

    Full Text Available Quality of life analysis of kidney graft recipients includes complex assessment of physical, psychological and social status and also certain laboratory and clinical studies. However we suppose that significance of the study might increase considerably if it would be multicenter. The objective of the present publication is to organize such a multicenter study. Obviously, quality of life of recipients with functioning transplanted kidney is undoubtedly of scientific interest and needs further extended studies that might contribute to better interpretation of long-term results after kidney transplantation. 

  3. Cryptococcal meningitis presenting as sinusitis in a renal transplant recipient.

    Science.gov (United States)

    Iyer, S P; Movva, K; Wiebel, M; Chandrasekar, P; Alangaden, G; Carron, M; Tranchida, P; Revankar, S G

    2013-10-01

    Cryptococcal meningitis is a relatively common invasive fungal infection in immunocompromised patients, especially in solid organ transplant recipients. Clinical presentation typically includes fever, headache, photophobia, neck stiffness, and/or altered mental status. Unusual presentations may delay diagnosis. Therapy is challenging in renal transplant patients because of the nephrotoxicity associated with amphotericin B, the recommended treatment. We present a case of cryptococcal meningitis in a renal transplant recipient presenting as acute sinusitis with successful treatment using fluconazole as primary therapy. © 2013 John Wiley & Sons A/S.

  4. Trends in disability benefit recipient rates in post industrialised countries

    DEFF Research Database (Denmark)

    Rasmussen, Martin

    This working paper is part of a study organized by International Social Security Association (ISSA). The study is called Trends in disability benefit recipient rates in post-industrial societies. The other countries participating in the study are Sweden, United States, United Kingdom, The Netherl......This working paper is part of a study organized by International Social Security Association (ISSA). The study is called Trends in disability benefit recipient rates in post-industrial societies. The other countries participating in the study are Sweden, United States, United Kingdom...

  5. Household and Individual Risk Factors for Cholera among Cholera Vaccine Recipients in Rural Haiti.

    Science.gov (United States)

    Matias, Wilfredo R; Teng, Jessica E; Hilaire, Isabelle J; Harris, Jason B; Franke, Molly F; Ivers, Louise C

    2017-08-01

    Oral cholera vaccination was used as part of cholera control in Haiti, but the vaccine does not provide complete protection. We conducted secondary data analyses of a vaccine effectiveness study in Haiti to evaluate risk factors for cholera among cholera vaccine recipients. Individuals vaccinated against cholera that presented with acute watery diarrhea and had a stool sample positive for Vibrio cholerae O1 were included as cases. Up to four vaccinated individuals who did not present for treatment of diarrhea were included as controls for each case, and matched by location of residence, enrollment time, and age. We evaluated sociodemographic characteristics and risk factors for cholera. Univariable and multivariable logistic regression were performed to identify risk factors for cholera among vaccinees. Thirty-three vaccine recipients with culture-confirmed cholera were included as cases. One-hundred-and-seventeen of their matched controls reported receiving vaccine and were included as controls. In a multivariable analysis, self-reporting use of branded household water disinfection products as a means of treating water (adjusted relative risk [aRR] = 44.3, 95% confidence interval [CI] = 4.19-468.05, P = 0.002), and reporting having a latrine as the main household toilet (aRR = 4.22, 95% CI = 1.23-14.43, P = 0.02), were independent risk factors for cholera. Self-reporting always treating water (aRR = 0.09, 95% CI = 0.01-0.57, P = 0.01) was associated with protection against cholera. The field effectiveness of water, sanitation, and hygiene interventions used in combination with cholera vaccination in cholera control should be measured and monitored over time to identify and remediate shortcomings, and ensure successful impact on disease control.

  6. 46 CFR 8.540 - Enrollment in SIP.

    Science.gov (United States)

    2010-10-01

    ... ALTERNATIVES Streamlined Inspection Program § 8.540 Enrollment in SIP. Upon successful completion of the training and evaluation phase, the Coast Guard SIP Advisor will recommend to the OCMI that the company or...

  7. Nuclear Engineering Enrollments and Degrees Survey, 2007 Data

    International Nuclear Information System (INIS)

    Analysis and Evaluation, Science Education Programs

    2008-01-01

    The survey includes degrees granted between September 1, 2006, and August 1, 2007, and fall 2007 enrollments. Thirty-one academic programs reported having nuclear engineering programs during 2007, and data was obtained for all thirty-one

  8. Brief 66 Nuclear Engineering Enrollments and Degrees Survey, 2009 Data

    International Nuclear Information System (INIS)

    Blair, Larry M.

    2010-01-01

    The survey includes degrees granted between September 1, 2008 and August 31, 2009, and fall 2009 enrollments. Thirty-two academic programs reported having nuclear engineering programs during 2009, and data was obtained from all thirty-two.

  9. Dual Enrollment, Structural Reform, and the Completion Agenda

    Science.gov (United States)

    Karp, Melinda Mechur

    2015-01-01

    This chapter contextualizes and extends the previous chapters by addressing the intertwined issues of structural systems reform and college completion, as well as the role dual enrollment can play in ensuring equitable postsecondary outcomes for underrepresented students.

  10. Medicare-Medicaid Ever-enrolled Trends Report

    Data.gov (United States)

    U.S. Department of Health & Human Services — This detailed Excel document accompanies the PDF report on national trends in Medicare-Medicaid dual enrollment from 2006 through the year prior to the current year....

  11. Timing of College Enrollment and Family Formation Decisions

    DEFF Research Database (Denmark)

    Kristoffersen, Jannie H. Grøne; Humlum, Maria Knoth; Vejlin, Rune Majlund

    It is likely that the extent of progression in the educational system affects whether or not one decides to start a family at a given point in time. We estimate the effect of enrolling in college in the year of application on later family formation decisions such as the probability of being...... a parent at a certain age. Using college admission data, we find that individuals who are above the grade requirement for their preferred college program are more likely to enroll in college in a given year. Employing an IV strategy based on this idea, we find that delays in college enrollment postpone...... family formation decisions. For example, we find that the effect of enrolling in college on the probability of being a parent at age 27 is about 9 percentage points, corresponding to an increase of about 70 percent....

  12. Medicare Advantage-Part D Contract and Enrollment Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Medicare Advantage (MA) - Part D Contract and Enrollment Data section serves as a centralized repository for publicly available data on contracts and plans,...

  13. Health Physics Enrollments and Degrees Survey, 2008 Data

    International Nuclear Information System (INIS)

    2009-01-01

    The survey includes degrees granted between September 1, 2007 and August 31, 2008. Enrollment information refers to the fall term 2008. Twenty-six academic programs were included in the survey universe, and all 26 programs provided data

  14. Health Physics Enrollments and Degrees Survey, 2006 Data

    International Nuclear Information System (INIS)

    Oak Ridge Institute for Science and Education

    2007-01-01

    This annual survey collects 2006 data on the number of health physics degrees awarded as well as the number of students enrolled in health physics academic programs. Thirty universities offer health physics degrees; all responded to the survey

  15. Nuclear Engineering Enrollments and Degrees Survey, 2008 Data

    International Nuclear Information System (INIS)

    2009-01-01

    The survey includes degrees granted between September 1, 2007, and August 31, 2008, and fall 2008 enrollments. Thirty-one academic programs reported having nuclear engineering programs during 2008, and data was provided by all thirty-one programs

  16. Why mothers choose to enrol their children in malaria clinical ...

    African Journals Online (AJOL)

    Why mothers choose to enrol their children in malaria clinical studies and the involvement of relatives in decision making: Evidence from Malawi. F Masiye, N Kass, A Hyder, P Ndebele, J Mfutso-Bengo ...

  17. The drivers of student enrolment and retention: A stakeholder ...

    African Journals Online (AJOL)

    ... in this paper offers a promising resource for the student development strategies of academic institutions. Keywords: student enrolment, student retention, higher education, Q methodology, student development strategy, Unisa, communication, solution meaning, perception analysis, brand perception, university marketing ...

  18. Brief 75 Health Physics Enrollments and Degrees Survey, 2014 Data

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-03-05

    The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014. Enrollment information refers to the fall term 2014. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program equivalent to a major.

  19. Barriers to Enrollment in Health Coverage in Colorado.

    Science.gov (United States)

    Martin, Laurie T; Bharmal, Nazleen; Blanchard, Janice C; Harvey, Melody; Williams, Malcolm

    2015-03-20

    As part of the implementation of the Affordable Care Act, Colorado has expanded Medicaid and also now operates its own health insurance exchange for individuals (called Connect for Health Colorado). As of early 2014, more than 300,000 Coloradans have newly enrolled in Medicaid or health insurance through Connect for Health Colorado, but there also continues to be a diverse mix of individuals in Colorado who remain eligible for but not enrolled in either private insurance or Medicaid. The Colorado Health Foundation commissioned the RAND Corporation to conduct a study to better understand why these individuals are not enrolled in health insurance coverage and to develop recommendations for how Colorado can strengthen its outreach and enrollment efforts during the next open enrollment period, which starts in November 2014. RAND conducted focus groups with uninsured and newly insured individuals across the state and interviews with local stakeholders responsible for enrollment efforts in their regions. The authors identified 11 commonly cited barriers, as well as several that were specific to certain regions or populations (such as young adults and seasonal workers). Collectively, these barriers point to a set of four priority recommendations that stakeholders in Colorado may wish to consider: (1) Support and expand localized outreach and tailored messaging; (2) Strengthen marketing and messaging to be clear, focused on health benefits of insurance (rather than politics and mandates), and actionable; (3) Improve the clarity and transparency of insurance and health care costs and enrollment procedures; and (4) Revisit the two-stage enrollment process and improve Connect for Health Colorado website navigation and technical support.

  20. Telephone Enrollment in the VA Healthcare System. Interim final rule.

    Science.gov (United States)

    2016-03-16

    This rulemaking amends VA's medical regulations to allow veterans to complete applications for health care enrollment by telephone by providing application information to a VA employee, agreeing to VA's provisions regarding copayment liability and assignment of third-party insurance benefits, and attesting to the accuracy and authenticity of the information provided over the phone. This action will make it easier for veterans to apply to enroll and will speed VA processing of applications.

  1. Strategic Enrollment Management for Chief Enrollment ­Officers: Practical Use of Statistical and Mathematical Data in Forecasting First Year and Transfer College Enrollment

    Science.gov (United States)

    Langston, Randall; Wyant, Robert; Scheid, Jamie

    2016-01-01

    Both an art and a science, enrollment projections have become a major component to effective college and university fiscal planning. With stagnant or declining state budget support for public higher education along with an increasing emphasis on revenue generation, never before has predicting the size of an entering class become more imperative.…

  2. Impact of donor and recipient race on survival after hepatitis C-related liver transplantation.

    Science.gov (United States)

    Layden, Jennifer E; Cotler, Scott J; Grim, Shellee A; Fischer, Michael J; Lucey, Michael R; Clark, Nina M

    2012-02-27

    Both donor and recipient race impact outcomes after liver transplantation (LT), especially for hepatitis C virus (HCV). The interaction and simultaneous impact of both on patient survival is not clearly defined. The purpose of this study was to examine the impact of donor and recipient race on recipient and graft survival after HCV-related LT using the United Network for Organ Sharing database. A total of 16,053 recipients (75.5% white, 9.3% black, and 15.2% Hispanic) who underwent primary LT for HCV between 1998 and 2008 were included. Cox regression models were used to assess the association between recipient/donor race and patient survival. A significant interaction between donor and recipient race was noted (P=0.01). Black recipients with white donors had a higher risk of patient mortality (adjusted hazard ratio, 1.66; 95% confidence interval, 1.47-1.87) compared with that of white recipients with white donors. In contrast, the pairing of Hispanic recipients with black donors was associated with a lower risk of recipient mortality compared with that of white recipients with white donors (adjusted hazard ratio, 0.64; 95% confidence interval, 0.46-0.87). Similar results were noted for graft failure. In conclusion, the impact of donor and recipient race on patient survival varies substantially by the matching of recipient/donor race.

  3. Cracking and interfacial debonding of the Al–Si coating in hot stamping of pre-coated boron steel

    Energy Technology Data Exchange (ETDEWEB)

    Gui, Zhong-Xiang; Wang, Kai; Zhang, Yi-Sheng [College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhu, Bin, E-mail: zhubin26@gmail.com [College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2014-10-15

    Highlights: • Cracking failure of the Al–Si coating in hot stamping process was investigated. • Microcracks initiated inside the coating during the austenitization. • Microcrack initiation in the hot deformation correlated to the Fe–Al intermetallics. • Macrocracks extended along the Mode I path led to the coating break into segments. • Macrocracks growth followed Mode II path resulted in the interfacial debonding. - Abstract: This study is focused on the mechanisms of cracks initiation, propagation and interfacial debonding of the Al–Si coating in hot stamping of the pre-coated boron steel. The investigation was performed isothermally at three deformation temperatures (700, 750, 800 °C) at a strain rate of 0.1/s. Cracking and interfacial debonding of the coating were observed with optical and scanning electron microscope, to reveal the damage evolution under applied tensile strains. Microstructures and phase inside the coating before and after austenitization were determined by energy dispersive spectroscopy and X-ray diffraction. The results indicate that austenitization led to micro-cracks and Kirkendall voids initiation inside the Al–Si coating because of thermal loading, and the cracks were arrested by α-Fe diffusion layer. When the coating on substrate system was submitted to the uniaxial tensile test, the surface coating exhibited multiple cracking normal to the tensile direction. The Kirkendall voids seemed to promote the macro-crack growth through the diffusion layer. The macro-cracks followed a Mode I path, leading to the coating deteriorates to cracked segments. The macro-cracks then continued to propagate following a Mode II path that along the diffusion layer/substrate interface because of shear stress transferred from the deformed substrate, resulting in the interfacial debonding of the coating segments. The crack density firstly increased with the increasing tensile strain and then reached saturation. Decreasing deformation

  4. 45 CFR 89.3 - Organizational integrity of recipients.

    Science.gov (United States)

    2010-10-01

    ... prostitution and sex trafficking because of the psychological and physical risks they pose for women, men and... 45 Public Welfare 1 2010-10-01 2010-10-01 false Organizational integrity of recipients. 89.3 Section 89.3 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION ORGANIZATIONAL...

  5. Non-communicable diseases in antiretroviral therapy recipients in ...

    African Journals Online (AJOL)

    attributable fraction (PAF) for the NCDs on physical functioning was 0.28 and on mental health was 0.22. Conclusion: Self-reported NCDs were prevalent among the HAART recipients in Kagera region. They accounted for 28% of the physical functioning scores and 22% of the mental health scores that were below the mean ...

  6. Ethical Challenges of Embryo Donation in Embryo Donors and Recipients.

    Science.gov (United States)

    Taebi, Mahboubeh; Bahrami, Reyhane; Bagheri-Lankarani, Narges; Shahriari, Mohsen

    2018-01-01

    Embryo donation, as one of the novel assisted reproductive technologies (ART), has remained a controversial issue. This is due to this methods' need for individuals from outside the family circle. Their presence can cause many ethical issues and complicate the designing and planning of the embryo donation process. The present study was conducted with the aim to assess the ethical challenges of embryo donation from the view point of embryo donors and recipients. This descriptive, cross-sectional study was conducted on 192 couples (96 embryo donators and 96 embryo recipients) referring to Isfahan Fertility and Infertility Center and Royan Institute, Iran. The subjects were selected through convenience sampling. The data collection tool was the researcher-made Ethical Challenges Questionnaire. Data were analyzed in SPSS software. Embryo donors and recipients expresses the most important ethical challenges of embryo donation in the principle of justice (70.20%) and respect for autonomy (42.57%), respectively. The four ethical principles are important in the view of embryo donors and recipients; however, they highlighted the importance of the principle of respect for autonomy considering the existing barriers in the services of infertility centers. Legislators and relevant authorities must take measures toward the development of guidelines for this treatment method in the framework of ethics principles and incorporate all four principles independently.

  7. Ethical challenges of embryo donation in embryo donors and recipients

    Directory of Open Access Journals (Sweden)

    Mahboubeh Taebi

    2018-01-01

    Full Text Available Background: Embryo donation, as one of the novel assisted reproductive technologies (ART, has remained a controversial issue. This is due to this methods' need for individuals from outside the family circle. Their presence can cause many ethical issues and complicate the designing and planning of the embryo donation process. The present study was conducted with the aim to assess the ethical challenges of embryo donation from the view point of embryo donors and recipients. Material and Methods: This descriptive, cross-sectional study was conducted on 192 couples (96 embryo donators and 96 embryo recipients referring to Isfahan Fertility and Infertility Center and Royan Institute, Iran. The subjects were selected through convenience sampling. The data collection tool was the researcher-made Ethical Challenges Questionnaire. Data were analyzed in SPSS software. Results: Embryo donors and recipients expresses the most important ethical challenges of embryo donation in the principle of justice (70.20% and respect for autonomy (42.57%, respectively. Conclusions: The four ethical principles are important in the view of embryo donors and recipients; however, they highlighted the importance of the principle of respect for autonomy considering the existing barriers in the services of infertility centers. Legislators and relevant authorities must take measures toward the development of guidelines for this treatment method in the framework of ethics principles and incorporate all four principles independently.

  8. Factors leading to dyspepsia in renal transplant recipients | Nazeer ...

    African Journals Online (AJOL)

    Gastritis (non H.pylori associated) in 78 (78.6%), duodenitis in 35 (38.9%) and H. pylori infection in 29 (32.2%), renal transplant recipients. Most of the patients belonged to Sindhi ethnicity, 27 (30%), followed by Punjabi. Hypertension was the most common co-morbid condition in our patients found in 29 (32.2%), while most ...

  9. Mycobacterium bovis hip bursitis in a lung transplant recipient.

    Science.gov (United States)

    Dan, J M; Crespo, M; Silveira, F P; Kaplan, R; Aslam, S

    2016-02-01

    We present a report of extrapulmonary Mycobacterium bovis infection in a lung transplant recipient. M. bovis is acquired predominantly by zoonotic transmission, particularly from consumption of unpasteurized foods. We discuss epidemiologic exposure, especially as relates to the Mexico-US border, clinical characteristics, resistance profile, and treatment. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. Melanoma in Organ Transplant Recipients: Incidence, Outcomes and Management Considerations

    Directory of Open Access Journals (Sweden)

    Faisal R. Ali

    2012-01-01

    Full Text Available The incidence of melanoma continues to increase year on year. With better surgical techniques and medical management, greater numbers of organ transplants are being performed annually with much longer graft survival. The authors review our current understanding of the incidence of melanoma amongst organ transplant recipients, outcomes compared to the immunocompetent population, and management strategies in this burgeoning group.

  11. 10 CFR 4.231 - Responsibility of applicants and recipients.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Responsibility of applicants and recipients. 4.231 Section 4.231 Energy NUCLEAR REGULATORY COMMISSION NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OR... list of the interested persons consulted, (ii) a description of areas examined and any problems...

  12. Melanoma in Organ Transplant Recipients: Incidence, Outcomes and Management Considerations

    International Nuclear Information System (INIS)

    Ali, F. R.; Lear, J. T.

    2012-01-01

    The incidence of melanoma continues to increase year on year. With better surgical techniques and medical management, greater numbers of organ transplants are being performed annually with much longer graft survival. The authors review our current understanding of the incidence of melanoma amongst organ transplant recipients, outcomes compared to the immunocompetent population, and management strategies in this burgeoning group

  13. Epidemiogic aspects of skin cancer in organ-transplant recipients

    NARCIS (Netherlands)

    Wisgerhof, Hermina Christina

    2011-01-01

    The risk of (skin) cancer is highly increased in organ-transplant recipients who are kept on immunesuppressive drugs to prevent graft rejection. This thesis dealt with the epidemiologic aspects and risk factors for cancer focused on cutaneous squamous cell carcinoma and basal cell carcinoma.

  14. Undergraduate Origins of Recent Science and Engineering Doctorate Recipients.

    Science.gov (United States)

    Hill, Susan T.; And Others

    Because undergraduate education is the foundation for graduate studies, it is important to know where our Nation's science and engineering (S&E) doctorate recipients are receiving their undergraduate training. Specifically, this report addresses the following broad questions: (1) What are the undergraduate origins of S&E doctorate holders? (2)…

  15. Urinary tract infection in renal transplant recipients | Elkehili | Arab ...

    African Journals Online (AJOL)

    Introduction: Urinary tract infection (UTI) is the commonest bacterial infection occurring in renal transplant recipients, and it is associated with significant morbidity. This study aimed to assess the characteristics of all UTI episodes diagnosed in renal transplant patients who attended regularly for follow up in the nephrology ...

  16. 13 CFR 117.8 - Responsibilities of SBA recipients.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Responsibilities of SBA recipients. 117.8 Section 117.8 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES OF SBA-EFFECTUATION OF THE AGE DISCRIMINATION ACT OF 1975, AS...

  17. Determinants of insulin resistance in renal transplant recipients

    NARCIS (Netherlands)

    Oterdoom, Leendert H.; de Vries, Aiko P. J.; Gansevoort, Ron T.; van Son, Willem J.; van der Heide, Jaap J. Homan; Ploeg, Rutger J.; de Jong, Paul E.; Gans, Reinold O. B.; Bakker, Stephan J. L.

    2007-01-01

    Background. Insulin resistance is considered to play an important role in the development of cardiovascular disease, which limits long-term renal transplant survival. Renal transplant recipients are more insulin -resistant compared with healthy controls. It is not known to date which factors relate

  18. 40 CFR 35.6790 - High risk recipients.

    Science.gov (United States)

    2010-07-01

    ... STATE AND LOCAL ASSISTANCE Cooperative Agreements and Superfund State Contracts for Superfund Response Actions Other Administrative Requirements for Cooperative Agreements § 35.6790 High risk recipients. If... described in 40 CFR 31.12. Requirements for Administering a Superfund State Contract (SSC) ...

  19. Kaposi's sarcoma in renal transplant recipients: Experience at ...

    African Journals Online (AJOL)

    Between August 1966 and December 1989, 989 renal transplant recipients were followed up at the Renal Transplant Unit of Johannesburg Hospital. Seventy-five (7%) patients developed a total of 95 malignancies of which 5 (6%) were Kaposi's sarcoma. All patients received immunosuppressive agents; steroids, ...

  20. Treating Families of Bone Marrow Recipients and Donors

    Science.gov (United States)

    Cohen, Marie; And Others

    1977-01-01

    Luekemia and aplastic anemia are beginning to be treated by bone marrow transplants, involving donors and recipients from the same family. Such intimate involvement in the patient's life and death struggles typically produces a family crisis and frequent maladaptive responses by various family members. (Author)

  1. Circulating Haptoglobin and Metabolic Syndrome in Renal Transplant Recipients

    NARCIS (Netherlands)

    Minović, Isidor; Eisenga, Michele F.; Riphagen, Ineke J.; Berg, van den Else; Kootstra-Ros, Jenny E.; Frenay, Anne-Roos S.; Goor, van Harry; Rimbach, Gerald; Esatbeyoglu, Tuba; Levy, Andy P.; Ajm Gaillard, Carlo; Geleijnse, Johanna M.; Eggersdorfer, Manfred L.; Navis, Gerjan J.; Kema, Ido P.; Bakker, Stephan L.J.

    2017-01-01

    Haptoglobin (Hp) is an acute phase protein that has recently been linked to components of the metabolic syndrome (MetS). We aimed to evaluate Hp as marker of MetS, and to assess its association with long-term outcome in renal transplant recipients (RTR). We measured plasma Hp in a prospective

  2. Sex differences among recipients of benzodiazepines in Dutch general practice.

    NARCIS (Netherlands)

    Waals, F.W. van der; Mohrs, J.; Foets, M.

    1993-01-01

    Objective: To analyse sex differences among recipients of benzodiazepines in Dutch general practice. Design-Study of consultations and associated interventions as recorded in the Dutch national survey of general practice. Setting: Practices of 45 general practitioners monitored during 1 April to 30

  3. Iron Deficiency, Anemia and Mortality in Renal Transplant Recipients

    NARCIS (Netherlands)

    Eisenga, Michele F.; Minovic, Isidor; Berger, Stefan P; Kootstra-Ros, Jenny E.; van den Berg, Else; Riphagen, Ineke J.; Navis, Gerjan J.; Van der Meer, Peter; Bakker, Stephan J. L.; Gaillard, Carlo A. J. M.

    2016-01-01

    Anemia, iron deficiency anemia (IDA), and iron deficiency (ID) are highly prevalent in renal transplant recipients (RTR). Anemia is associated with poor outcome, but the role of ID is unknown. Therefore, we aimed to investigate the association of ID, irrespective of anemia, with all-cause mortality

  4. 10 CFR 603.215 - Recipient's commitment and cost sharing.

    Science.gov (United States)

    2010-01-01

    ... self-interest in the success of the project and incorporating the technology into products and... proposal, in the recipient's management plan, or through other means. (b) The contracting officer must seek... 603.215 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS TECHNOLOGY INVESTMENT...

  5. Zonulin and iron metabolism in heart transplant recipients.

    Science.gov (United States)

    Przybyłowski, P; Nowak, E; Janik, L; Wasilewski, G; Kozlowska, S; Małyszko, J

    2014-10-01

    In patients after heart transplantation, anemia is relatively common and is associated with impaired kidney function, subclinical inflammatory state, and immunosuppressive treatment. Zonulin-prehaptoglibin-2 is newly discovered protein with poorly defined function. Hemoglobin binds haptoglobin, and this stable complex prevents oxidative stress caused by hemoglobin. Zonulin is necessary for integrity of intracellular tight junction in the gut. Taking into consideration iron metabolism, including its absorption in the gut, the aim of this study was to assess zonulin levels in heart transplant recipients and their possible correlations with iron status, immunosuppressive therapy, and kidney function. The study was performed with 80 stable heart transplant recipients and 22 healthy volunteers. Zonulin, iron status, and inflammatory markers were assessed with the use of commercially available kits. Zonulin correlated with intraventricular diameter (r = 0.30; P zonulin and iron status. Zonulin was significantly lower in heart transplant recipients than in healthy volunteers (P zonulin level. Zonulin, despite its effect on the absorption of different nutrients and other substances and hypothethic role in oxidative stress, seems not to play a role in the pathogenesis of anemia in heart transplant recipients. Its physiologic role remains obscure.

  6. Prevalence of the Metabolic Syndrome in Renal Transplant Recipients

    African Journals Online (AJOL)

    Prevalence of the Metabolic Syndrome in Renal Transplant Recipients. ... Cholesterol Education Program Adult Treatment Panel III (NCEP-ATP III) criteria and the International Diabetes Federation (IDF) criteria. ... Results: By using the NCEP-ATP III criteria 26 out of 91 patients (28.6%) had the metabolic syndrome. MS was ...

  7. Molecular appraisal of intestinal parasitic infection in transplant recipients

    Directory of Open Access Journals (Sweden)

    Pooja Yadav

    2016-01-01

    Full Text Available Background & objectives: Diarrhoea is the main clinical manifestation caused by intestinal parasitic infections in patients, with special reference to transplant recipients who require careful consideration to reduce morbidity and mortality. Further, molecular characterization of some important parasites is necessary to delineate the different modes of transmission to consider appropriate management strategies. We undertook this study to investigate the intestinal parasitic infections in transplant recipients with or without diarrhoea, and the genotypes of the isolated parasites were also determined. Methods: Stool samples from 38 transplant recipients comprising 29 post-renal, two liver and seven bone marrow transplant (BMT recipients presenting with diarrhoea and 50 transplant recipients (42 post-renal transplant, eight BMT without diarrhoea were examined for the presence of intestinal parasites by light microscopy using wet mount, modified Ziehl-Neelsen staining for intestinal coccidia and modified trichrome staining for microsporidia. Genotypes of Cryptosporidium species were determined by multilocus genotyping using small subunit ribosomal (SSUrRNA, Cryptosporidium oocyst wall protein (COWP and dihydrofolate reductase (DHFR as the target genes. Assemblage study for Giardia lamblia was performed using triose phosphate isomerase (TPI as the target gene. Samples were also screened for bacterial, fungal and viral pathogens. Results: The parasites that were detected included Cryptosporidium species (21%, 8/38, Cystoisospora (Isospora belli (8%, 3, Cyclospora cayetanensis (5%, 2, G. lamblia (11%, 4, Hymenolepis nana (11%, 4, Strongyloides stercoralis (3%, 1 and Blastocystis hominis (3%, 1. Multilocus genotyping of Cryptosporidium species at SSUrRNA, COWP and DHFR loci could detect four isolates of C. hominis; two of C. parvum, one of mixed genotype and one could not be genotyped. All the C. hominis isolates were detected in adult post

  8. Teen clinics: missing the mark? Comparing pregnancy and sexually transmitted infections rates among enrolled and non-enrolled adolescents.

    Science.gov (United States)

    Shaw, Souradet Y; Metge, Colleen; Taylor, Carole; Chartier, Mariette; Charette, Catherine; Lix, Lisa; Santos, Rob; Sarkar, Joykrishna; Nickel, Nathan C; Burland, Elaine; Chateau, Dan; Katz, Alan; Brownell, Marni; Martens, Patricia J

    2016-06-21

    In Manitoba, Canada, school-based clinics providing sexual and reproductive health services for adolescents have been implemented to address high rates of sexually transmitted infections (STIs) and pregnancies. The objectives of this population-based study were to compare pregnancy and STI rates between adolescents enrolled in schools with school-based clinics, those in schools without clinics, and those not enrolled in school. Data were from the PATHS Data Resource held in the Population Health Research Data Repository housed at the Manitoba Centre for Health Policy. Adolescents aged 14 to 19 between 2003 and 2009 were included in the study. Annualized rates of pregnancies and positive STI tests were estimated and Poisson regression models were used to test for differences in rates amongst the three groups. As a proportion, pregnancies among non-enrolled female adolescents accounted for 55 % of all pregnancies in this age group during the study period. Pregnancy rates were 2-3 times as high among non-enrolled female adolescents. Compared to adolescents enrolled in schools without school-based clinics, age-adjusted STI rates were 3.5 times (p pregnancies and STIs were observed among non-enrolled adolescents. Although provision of reproductive and health services to in-school adolescents should remain a priority, program planning and design should consider optimal strategies to engage out of school youth.

  9. Perspectives of Older Kidney Transplant Recipients on Kidney Transplantation.

    Science.gov (United States)

    Pinter, Jule; Hanson, Camilla S; Chapman, Jeremy R; Wong, Germaine; Craig, Jonathan C; Schell, Jane O; Tong, Allison

    2017-03-07

    Older kidney transplant recipients are susceptible to cognitive impairment, frailty, comorbidities, immunosuppression-related complications, and chronic graft failure, however, there has been limited focus on their concerns and expectations related to transplantation. This study aims to describe the perspectives of older kidney transplant recipients about their experience of kidney transplantation, self-management, and treatment goals to inform strategies and interventions that address their specific needs. Face-to-face semistructured interviews were conducted with 30 kidney transplant recipients aged 65-80 years from five renal units in Australia. Transcripts were analyzed thematically. Six themes were identified: restoring vitality of youth (with subthemes of revived mindset for resilience, embracing enjoyment in life, drive for self-actualization); persisting through prolonged recovery (yielding to aging, accepting functional limitations, pushing the limit, enduring treatment responsibilities); imposing sicknesses (combatting devastating comorbidities, painful restrictions, emerging disillusionment, anxieties about accumulating side effects, consuming treatment burden); prioritizing graft survival (privileged with a miracle, negotiating risks for longevity, enacting a moral duty, preserving the last opportunity); confronting health deterioration (vulnerability and helplessness, narrowing focus to immediate concerns, uncertainty of survival); and value of existence (purpose through autonomy, refusing the burden of futile treatment, staying alive by all means). Older kidney transplant recipients felt able to enjoy life and strived to live at their newly re-established potential and capability, which motivated them to protect their graft. However, some felt constrained by slow recuperation and overwhelmed by unexpected comorbidities, medication-related side effects, and health decline. Our findings suggest the need to prepare and support older recipients for self

  10. New organic photo-curable nanoimprint resist ≪mr-NIL210≫ for high volume fabrication applying soft PDMS-based stamps

    OpenAIRE

    Messerschmidt, Martin; Greer, Andrew; Schlachter, Florian; Barnett, Julian; Thesen, Manuel W.; Gadegaard, Nikolaj; Grutzner, Gabi; Schleunitz, Arne

    2017-01-01

    Herein, we report on a newly developed and commercialized organic photo-curable Nanoimprint Lithography (NIL) resist, namely mr-NIL210. Since this new NIL resist follows an innovative design concept and contains solely specific monomers with a characteristic chemistry and molecular design, an extended longevity of applied polydimethyl siloxane (PDMS) stamps is enabled addressing a crucial key metric for industrial high-volume manufacturing processes. Moreover, the mr-NIL210 is characterized b...

  11. Using the fibre structure of paper to determine authenticity of the documents: analysis of transmitted light images of stamps and banknotes.

    Science.gov (United States)

    Takalo, Jouni; Timonen, Jussi; Sampo, Jouni; Rantala, Maaria; Siltanen, Samuli; Lassas, Matti

    2014-11-01

    A novel method is presented for distinguishing postal stamp forgeries and counterfeit banknotes from genuine samples. The method is based on analyzing differences in paper fibre networks. The main tool is a curvelet-based algorithm for measuring overall fibre orientation distribution and quantifying anisotropy. Using a couple of more appropriate parameters makes it possible to distinguish forgeries from genuine originals as concentrated point clouds in two- or three-dimensional parameter space. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  12. Effect Analysis of Geometric Parameters on Stainless Steel Stamping Multistage Pump by Experimental Test and Numerical Calculation

    Directory of Open Access Journals (Sweden)

    Chuan Wang

    2013-01-01

    Full Text Available In order to improve the efficiency of stainless steel stamping multistage pump, quadratic regression orthogonal test, hydraulic design, and computational fluid dynamics (CFD are used to analyze the effect of pump geometric parameters. Sixteen impellers are designed based on the quadratic regression orthogonal test, which have three factors including impeller outlet slope, impeller blade outlet stagger angle, and impeller blade outlet width. Through quadratic regression equation, the function relationship between efficiency values and three factors is established. The optimal combination of geometric parameters is found through the analysis of the regression equation. To further study the influence of blade thickness on the performance of multistage pump, numerical simulations of multistage pump with different blade thicknesses are carried out. The influence law of blade thickness on pump performance is built from the external characteristics and internal flow field. In conclusion, with the increase of blade thickness, the best efficiency point of the pump shifts to the small flow rate direction, and the vortex regions inside the pump at rated flow gradually increase, which is the main reason that pump efficiency decreases along with the increase of the blade thickness at rated flow.

  13. ‘Postage-stamp PIV’: small velocity fields at 400 kHz for turbulence spectra measurements

    Science.gov (United States)

    Beresh, Steven J.; Henfling, John F.; Spillers, Russell W.; Spitzer, Seth M.

    2018-03-01

    Time-resolved particle image velocimetry recently has been demonstrated in high-speed flows using a pulse-burst laser at repetition rates reaching 50 kHz. Turbulent behavior can be measured at still higher frequencies if the field of view is greatly reduced and lower laser pulse energy is accepted. Current technology allows image acquisition at 400 kHz for sequences exceeding 4000 frames but for an array of only 128  ×  120 pixels, giving the moniker of ‘postage-stamp PIV’. The technique has been tested far downstream of a supersonic jet exhausting into a transonic crossflow. Two-component measurements appear valid until 120 kHz, at which point a noise floor emerges whose magnitude is dependent on the reduction of peak locking. Stereoscopic measurement offers three-component data for turbulent kinetic energy spectra, but exhibits a reduced signal bandwidth and higher noise in the out-of-plane component due to the oblique camera images. The resulting spectra reveal two regions exhibiting power-law dependence describing the turbulent decay. The frequency response of the present measurement configuration exceeds nearly all previous velocimetry measurements in high speed flow.

  14. Estimating Bus Loads and OD Flows Using Location-Stamped Farebox and Wi-Fi Signal Data

    Directory of Open Access Journals (Sweden)

    Yuxiong Ji

    2017-01-01

    Full Text Available Electronic fareboxes integrated with Automatic Vehicle Location (AVL systems can provide location-stamped records to infer passenger boarding at individual stops. However, bus loads and Origin-Destination (OD flows, which are useful for route planning, design, and real-time controls, cannot be derived directly from farebox data. Recently, Wi-Fi sensors have been used to collect passenger OD flow information. But the data are insufficient to capture the variation of passenger demand across bus trips. In this study, we propose a hierarchical Bayesian model to estimate trip-level OD flow matrices and a period-level OD flow matrix using sampled OD flow data collected by Wi-Fi sensors and boarding data provided by fareboxes. Bus loads on each bus trip are derived directly from the estimated trip-level OD flow matrices. The proposed method is evaluated empirically on an operational bus route and the results demonstrate that it provides good and detailed transit route-level passenger demand information by combining farebox and Wi-Fi signal data.

  15. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    Directory of Open Access Journals (Sweden)

    Dong Y.

    2015-01-01

    Full Text Available In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tribological behaviour of aluminium differed great from that of steel regardless of the counterpart material. Highly reactive aluminium had a strong tendency to solder with tool surfaces during dry sliding. However, the lubricity of gray cast irons can be significantly improved by Ni-BN and DLC coatings. The coefficient of friction reduced from about 0.5 for untreated cast irons to about 0.2 sliding against aluminium. Duplex treatment combining plasma nitrocarburising with low-friction coatings showed superior durability than both DLC and Ni-BN coatings.

  16. ABC di corpi: alcuni alfabeti figurati del XVI secolo del Gabinetto Disegni e Stampe della Pinacoteca Nazionale di Bologna

    Directory of Open Access Journals (Sweden)

    Valeria Butera

    2013-10-01

    Full Text Available Fra le diverse tipologie di motivi ornamentali, gli alfabeti figurati costituiscono un vero e proprio genere a se stante, che attinge al repertorio iconografico del proprio tempo e lo riflette in composizioni dotate di grande fascino e originalità. Per la quantità, la qualità e l’eterogeneità degli esemplari custoditi, il Gabinetto Disegni e Stampe della Pinacoteca Nazionale di Bologna costituisce un caso più unico che raro in Italia, vantando alfabeti figurati che abbracciano ampi confini geografici e cronologici, spaziando dal tardo gotico al XIX secolo. Dopo una breve introduzione sulle vicende collezionistiche di un nucleo grafico così insolito e particolare, l’articolo si concentra su alcuni esemplari di alfabeti figurati del Cinquecento di area transalpina. Partendo dall’alfabeto dei bambini di Hans Weiditz (1521, costruito rispettando le più rigorose regole geometriche, codificate nei coevi trattati rinascimentali, ma anche riflesso del rinato gusto per i fregi all’antica con putti, si passa agli alfabeti di Peter Flötner (1534 e di Jost Amman (1567, dove le lettere sono integralmente costituite da corpi umani, forzati in complicate posture, talvolta persino licenziose. Questi esemplari rappresentano degli interessanti esperimenti calligrafici, dove l’uomo diviene concretamente l’unità di misura dei caratteri dell’alfabeto.

  17. An observational study of health literacy and medication adherence in adult kidney transplant recipients

    OpenAIRE

    Demian, Maryam N.; Shapiro, R. Jean; Thornton, Wendy Loken

    2016-01-01

    Background There is a high prevalence of non-adherence to immunosuppressants in kidney transplant recipients. Although limited health literacy is common in kidney recipients and is linked to adverse outcomes in other medical populations, its effect on medication adherence in kidney transplant recipients remains poorly understood. The objective was to investigate the effect of lower health literacy on immunosuppressant adherence. Methods Kidney recipients who were at least 6 months post-transp...

  18. Aid Allocation across Sectors: Does aid fit well with recipients' development priorities?

    OpenAIRE

    KASUGA Hidefumi

    2008-01-01

    This paper investigates whether aid flows to developing countries fit well with their development priorities. In particular, we examine aid allocation across sectors in a given recipient country by using sectoral data on aid and indicators that measure the recipient's need for aid in each sector. The data show that inter-recipient aid allocation reflects the recipient's need. However, we found no evidence that inter-sectoral allocation fits with national priorities except in high- and middle-...

  19. Difficulties in the revaccination program of hematopoietic stem cell transplantation recipients

    OpenAIRE

    da Silva, Paula Moreira; da Silva, Élen Monteiro; Simioni, Anderson João; de Souza, Mair Pedro; Colturato, Vergílio Antonio Rensi; Machado, Clarisse Martins

    2017-01-01

    ABSTRACT Hematopoietic stem cell transplant (HSCT) recipients should be routinely revaccinated after transplantation. We evaluated the difficulties met in the revaccination program and how a prospective and tailored follow-up could help to overcome these obstacles. HSCT recipients (n=122) were prospectively followed up and categorized into Group 1 (n=72), recipients who had already started the revaccination program, and Group 2 (n=50), recipients starting their vaccines. Whenever a difficulty...

  20. Depressive symptoms and associated factors among renal-transplant recipients in China

    Directory of Open Access Journals (Sweden)

    Xiaohong Lin

    2016-12-01

    Conclusion: Depression is common among RT recipients in China. Employment status, economic burden, inhabitation area, and social support are the main factors affecting depression among RT recipients. Follow-up clinics should prescribe the evaluation of depression as a routine examination for RT patients. Moreover, depressed recipients must be provided with individualized care by collecting information on the depressive symptoms, employment status, economic burden, inhabitation area, and perceived social support of recipients.