WorldWideScience

Sample records for stamp program administrative

  1. ANALYSIS OF FOOD STAMP PROGRAM PARTICIPATION AND FOOD EXPENDITURES

    OpenAIRE

    Smallwood, David M.; Blaylock, James R.

    1985-01-01

    A two equation model is developed to examine jointly the determinants of household food stamp program participation and program effects on food expenditures. The model is unique in that it postulates that the participation decision is based on a cost-benefit ratio, selected socioeconomic characteristics, and the potential for increasing both food and nonfood expenditures. Data from the 1977-78 USDA Nationwide Food Consumption Survey Supplemental Low Income Sample is used to estimate the model...

  2. 7 CFR Appendix A to Part 277 - Principles for Determining Costs Applicable to Administration of the Food Stamp Program by State...

    Science.gov (United States)

    2010-01-01

    ...) Standard indirect rate equal to ten percent of direct labor cost in providing the service (excluding... direct or indirect costs. Examples of such transactions are: Purchase discounts; rebates or allowances... total cost of a program is comprised of the allowable direct cost incident to its performance, plus its...

  3. Food Stamp and School Lunch Programs Alleviate Food Insecurity in Rural America. Fact Sheet

    Science.gov (United States)

    Smith, Kristin; Savage, Sarah

    2007-01-01

    The Food Stamp and the National School Lunch Programs play a vital role in helping poor, rural Americans obtain a more nutritious diet and alleviate food insecurity and hunger. This fact sheet looks at the extent to which rural America depends on these programs and describes characteristics of beneficiaries of these federal nutrition assistance…

  4. Does the Food Stamp Program cause obesity? A realist review and a call for place-based research.

    Science.gov (United States)

    DeBono, Nathaniel L; Ross, Nancy A; Berrang-Ford, Lea

    2012-07-01

    The high prevalence of obesity among low income groups has led some to question the role of food assistance programs in contributing to the problem. The USDA's Food Stamp Program (now known as the Supplemental Nutrition Assistance Program - SNAP) is the largest food assistance program in the United States with over 40 million participants. This paper employed systematic realist review methods to determine whether participation in the Food Stamp Program causes obesity and the causal pathways through which this relationship may exist. Findings indicate a more consistent positive relationship for women than for men, especially for women who are long term users of the program. All studies discussed the "food stamp cycle" and an "income effect" as explanations for the role of food stamps in increased obesity yet evidence for these factors is limited. Curiously, the research in this field does not address obesogenic environments and we suggest that the absence of an understanding of household behavior in local contexts is a significant impediment to the reform of the Food Stamp Program. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Scandiatransplant acceptable mismatch program (STAMP) a bridge to transplanting highly immunized patients

    DEFF Research Database (Denmark)

    Koefoed-Nielsen, Pernille; Weinreich, I; Bengtsson, M

    2017-01-01

    BACKGROUND: Highly immunized patients are a challenge for organ transplantation programs. One way of increasing the likelihood of transplantation in this group of patients is to expand the possible donations by defining acceptable HLA mismatches. In the Scandiatransplant Acceptable Mismatch Program...... (STAMP), a de-centralized approach has been implemented in 2009. AIMS: The program has been improved during the years from utilizing HLA-A, -B, -DR matching only to include typing of all deceased donors for HLA-A, -B, -C, -DRB1 and -DQB1. The calculation of a transplantability score (TS) has been...... introduced in order to take both HLA and AB0 into consideration resulting in a more realistic picture of the transplantability chance. MATERIALS AND METHODS: Patients were selected for eligibility and results of immunisation status were prepared in each of the 9 tissue typing laboratories, while access...

  6. Child Nutrition Programs. Administrative Manual.

    Science.gov (United States)

    Utah State Office of Education, Salt Lake City.

    Recognizing the importance of efficient and effective program administration for the success of Utah's Child Nutrition Programs, the State Office of Education developed a manual to assist local program administrators in using the U.S. Department of Agriculture's (USDA's) programs. This document contains Part 1 of the manual's four interrelated…

  7. 75 FR 4911 - Food Stamp Program: Eligibility and Certification Provisions of the Farm Security and Rural...

    Science.gov (United States)

    2010-01-29

    .... Several commenters suggested that the Department amend the current regulations to clarify that human trafficking victims and certain family members are eligible for food stamps to ensure that victims and their...). The guidance reflects the requirements under the ``Trafficking Victims Protection Act of 2000'' (Pub...

  8. 7 CFR 281.2 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 281.2 Section 281.2 Agriculture... FOOD STAMP AND FOOD DISTRIBUTION PROGRAM ADMINISTRATION OF THE FOOD STAMP PROGRAM ON INDIAN RESERVATIONS § 281.2 Administration. (a) Qualification. (1) The appropriate ITO of an established Indian...

  9. The Confluence of Sociology, Statistics, and Public Policy in the Quality Control of the Food Stamps, AFDC, and Medicaid Family Assistance Programs.

    Science.gov (United States)

    Press, S. James; Tanur, Judith M.

    1991-01-01

    Relevance of the intersection of sociology, statistics, and public policy to the study of quality control in three family assistance programs--food stamps, Aid to Families with Dependent Children (AFDC), and Medicaid--is reviewed using a study by the National Academy of Sciences of methods for improving quality control systems. (SLD)

  10. 45 CFR 152.6 - Program administration.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Program administration. 152.6 Section 152.6 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS PRE-EXISTING CONDITION INSURANCE PLAN PROGRAM PCIP Program Administration § 152.6 Program administration. (a) General rule. Section 1101(b)(1) of the...

  11. The STAMP Software for State Space Models

    Directory of Open Access Journals (Sweden)

    Roy Mendelssohn

    2011-05-01

    Full Text Available This paper reviews the use of STAMP (Structural Time Series Analyser, Modeler and Predictor for modeling time series data using state-space methods with unobserved components. STAMP is a commercial, GUI-based program that runs on Windows, Linux and Macintosh computers as part of the larger OxMetrics System. STAMP can estimate a wide-variety of both univariate and multivariate state-space models, provides a wide array of diagnostics, and has a batch mode capability. The use of STAMP is illustrated for the Nile river data which is analyzed throughout this issue, as well as by modeling a variety of oceanographic and climate related data sets. The analyses of the oceanographic and climate data illustrate the breadth of models available in STAMP, and that state-space methods produce results that provide new insights into important scientific problems.

  12. Hospital Organization, Administration and Wellness Programming.

    Science.gov (United States)

    Fleming, Jeanne Hmura

    1984-01-01

    Hospital organization, administration and planning, and implementation program procedures are reviewed in this article. Hospitals and medical centers are changing their strategies in the area of wellness programming since they offer the appropriate facilities for these programs. Various types of wellness programs currently being promoted are…

  13. Administration: Army Congressional Fellowship Program

    National Research Council Canada - National Science Library

    2000-01-01

    This printing publishes a new Army Regulation. This regulation presents the policies and procedures under which the Army manages the Army Congressional Fellowship Program and supplements applicable Department...

  14. Time Stamps for Fixed-Point Approximation

    DEFF Research Database (Denmark)

    Damian, Daniela

    2001-01-01

    Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed-point approximat......Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed...

  15. 24 CFR 92.616 - Program administration.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Program administration. 92.616 Section 92.616 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development HOME INVESTMENT PARTNERSHIPS PROGRAM American Dream Downpayment Initiative § 92.616 Program...

  16. 22 CFR 62.10 - Program administration.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Program administration. 62.10 Section 62.10 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES EXCHANGE VISITOR PROGRAM General... community resources (e.g., public transportation, medical centers, schools, libraries, recreation centers...

  17. School Administrator's Guide to Implementing Language Programming

    Science.gov (United States)

    Alberta Education, 2007

    2007-01-01

    The "School Administrator's Guide to Implementing Language Programming" serves as a starting point to plan for and implement language programming. It provides a general overview; suggests practical strategies for working with students, parents, teachers and the surrounding community; and includes details on areas to address in selecting…

  18. Stamp duties in Indian states - a case for reform

    OpenAIRE

    Alm, James; Annez, Patricia; Modi, Arbind

    2004-01-01

    The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

  19. Stamping through astronomy

    CERN Document Server

    Dicati, Renato

    2013-01-01

    Stamps and other postal documents are an attractive vehicle for presenting astronomy and its development. Written with expertise and great enthusiasm, this unique book offers a historical and philatelic survey of astronomy and some related topics on space exploration. It contains more than 1300 color reproductions of stamps relating to the history of astronomy, ranging from the earliest observations of the sky to modern research conducted with satellites and space probes. Featured are the astronomers and astrophysicists who contributed to this marvelous story – not only Ptolemy, Copernicus, Kepler, Newton, Herschel, and Einstein but also hundreds of other minor protagonists who played an important role in the development of this, the most ancient yet the most modern of all the sciences. The book also examines in depth the diverse areas which have contributed to the history of astronomy, including the instrumentation, the theories, and the observations. Many stamps illustrate the beauty and the mystery of ce...

  20. Stamping Die Making. 439-318/320.

    Science.gov (United States)

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  1. Rapid thermal processing by stamping

    Science.gov (United States)

    Stradins, Pauls; Wang, Qi

    2013-03-05

    A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

  2. The Bonneville Power Administration's geothermal program

    International Nuclear Information System (INIS)

    Darr, G.D.

    1990-01-01

    Despite being a power source with many desirable characteristics, geothermal has not been developed in the Pacific Northwest because of high costs, high risks, and the lack of a market for power. The region will require new power sources in the 1990s, and will need to know to what extent it can rely on geothermal. The Bonneville Power Administration has developed a geothermal RD and D program which includes a proposal to award power contracts to three pilot projects in the Northwest. Public outreach efforts, environmental base line studies, and economic and land use impact studies will also be undertaken. In this paper two projects already under way are discussed

  3. Federal Aviation Administration retained savings program proposal

    International Nuclear Information System (INIS)

    Hostick, D.J.; Larson, L.L.; Hostick, C.J.

    1998-03-01

    Federal legislation allows federal agencies to retain up to 50% of the savings associated with implementing energy efficiency and water conservation measures and practices. Given budget pressures to reduce expenditures, the use of retained savings to fund additional projects represents a source of funds outside of the traditional budget cycle. The Southwest Region Federal Aviation Administration (FAA) has tasked Pacific Northwest National Laboratory (PNNL) to develop a model retained savings program for Southwest Region FAA use and as a prototype for consideration by the FAA. PNNL recommends the following steps be taken in developing a Southwest Region FAA retained savings program: Establish a retained savings mechanism. Determine the level at which the retained savings should be consolidated into a fund. The preliminary recommendation is to establish a revolving efficiency loan fund at the regional level. Such a mechanism allows some consolidation of savings to fund larger projects, while maintaining a sense of facility ownership in that the funds will remain within the region

  4. Administrators' Roles in Training Programs and Training Transfer

    Science.gov (United States)

    Ismail, Azman; Hua, Ng Kueh; Ismail, Yusof; Samah, Ainon Jauhariah Abu; Bakar, Rixal Abu; Ibrahim, Nurshahira

    2015-01-01

    An administrator plays a vital role in the growth and development of his/her subordinates. Despite this notion, the role of an administrator in the context of training programs and transfer of training is not well studied. Therefore, this study is set to examine the relationship between administrator's role in training programs and training…

  5. Flexible Stamp for Nanoimprint Lithography

    DEFF Research Database (Denmark)

    Nielsen, Theodor; Pedersen, Rasmus H.; Hansen, Ole

    2005-01-01

    by membranes. The bending stiffness difference between the imprint areas and the membranes ensures that the deformation of the stamp during the imprint process mainly takes place in the membranes, leaving the imprint structures unaffected. By this design the strong demand to the parallelism between stamp...... and substrate in the imprint situation is decoupled from the pressing tool and the wafer quality. The stamp consist of 1562 imprint areas (1 mm × 1 mm) containing the patterns to be replicated. The imprinted patterns are characterized with respect to the imprint depth and the polymer residual layer thickness...

  6. Fabrication of Nanoimprint stamps for photonic crystals

    International Nuclear Information System (INIS)

    Kouba, J; Kubenz, M; Mai, A; Ropers, G; Eberhardt, W; Loechel, B

    2006-01-01

    We report on fabrication of nanoimprint stamps for fabrication of two dimensional photonic crystals in visible range of spectra. Nanoimprint stamps made of silicon and/or nickel were successfully fabricated using electron beam lithography and advanced dry etching techniques. The quality of the stamps was evaluated using scanning electron microscopy. The fabricated stamps were also evaluated by imprinting them into suitable polymer materials

  7. Building a sustainable administrative infrastructure for worksite wellness programs.

    Science.gov (United States)

    Chapman, Larry S

    2009-01-01

    As health care reform intensifies increasing references are being made to Worksite Wellness. These references are naturally leading to higher expectations for the effectiveness of Worksite Wellness programs. Yet the ultimate provisions regarding prevention and Wellness are not known. In the absence of legislative outcomes the focus for this edition is on the necessary administrative infrastructure that is needed to produce behavioral change, health risk mitigation and economic return from Wellness programming. Sixteen (16) administrative components are identified as critical to effective Wellness programming. Employee or health plan population size is seen as a significant variable in the design of the Wellness program's administrative infrastructure. Factors in sustainability and programming are also considered.

  8. 42 CFR 457.910 - State program administration.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false State program administration. 457.910 Section 457.910 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Program Integrity § 457.910 State program...

  9. Implementation of time stamping service

    OpenAIRE

    Tomažin , Vito

    2015-01-01

    This thesis deals with different ways of how to safely time-stamp digital content. The need for time-stamping arises when we would like to create evidence that certain content existed (or that a certain person was present somewhere) in a precisely specified period of time, so that later we can refer to this evidence. Creating temporal order in the digital world can prove to be difficult, since no data, including time, is recorded permanently. The system clock, which measures time with the ...

  10. Program Administration | Division of Cancer Prevention

    Science.gov (United States)

    Governance Structure Recognizing the importance of an integrated approach to preventative drug development, there is a unified Governance Structure for the PREVENT Program responsible for coordinating and integrating available resources. With the goal of reaching go/no-go decisions as efficiently as possible, the purpose is to ensure a pragmatic approach to drug development and a clear path to market. |

  11. Energy Efficiency Program Administrators and Building Energy Codes

    Science.gov (United States)

    Explore how energy efficiency program administrators have helped advance building energy codes at federal, state, and local levels—using technical, institutional, financial, and other resources—and discusses potential next steps.

  12. The curriculum success of business administration education programs

    NARCIS (Netherlands)

    Bijker, Monique; Van der Klink, Marcel; Boshuizen, Els

    2012-01-01

    Bijker, M. M., Van der Klink, M. R., & Boshuizen, H. P. A. (2011, 8 September). The curriculum success of business administration education programs. Presentation for the visit of KU Leuven, Open Universiteit, Heerlen, The Netherlands.

  13. Program for advanced study in public science policy and administration

    Science.gov (United States)

    Rosenthal, A. H.

    1976-01-01

    The results and conclusions of the six-year effort concerned with the development and implementation of a university educational program intended to prepare scientists and engineers for upper-level management and administrative positions (as distinct from senior technical positions) were presented. This interdisciplinary program is at the graduate level, leading to a Master of Arts degree, and is given within a Division of Public Administration.

  14. Food Stamps. Learning Packet No. 2.

    Science.gov (United States)

    American Bar Association, Washington, DC. Clearinghouse for Offender Literacy Programs.

    This package of instructional materials is designed to aid adults in prison to perform the functional skill of applying for food stamps. The materials consist of instructions for teachers, a sample application for food stamps, a student's work sheet and answer sheet, vocabulary flash cards, and resource materials on food stamps. (MKM)

  15. 7 CFR 916.115 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 916.115 Section 916.115 Agriculture... and Regulations § 916.115 Lot stamping. Except when loaded directly into railway cars, exempted under... Inspection Service lot stamp number, assigned by such Service, showing that such fruit has been USDA...

  16. 7 CFR 917.150 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 917.150 Section 917.150 Agriculture... CALIFORNIA Rules and Regulations Regulation of Daily Shipments § 917.150 Lot stamping. Except when loaded..., prior to shipment, with a Federal-State Inspection Service lot stamp number, assigned by such Service...

  17. Stamp Verification for Automated Document Authentication

    DEFF Research Database (Denmark)

    Micenková, Barbora; van Beusekom, Joost; Shafait, Faisal

    Stamps, along with signatures, can be considered as the most widely used extrinsic security feature in paper documents. In contrast to signatures, however, for stamps little work has been done to automatically verify their authenticity. In this paper, an approach for verification of color stamps ...

  18. Enculturation, Not Alchemy: Professionalizing Novice Writing Program Administrators.

    Science.gov (United States)

    Peters, Bradley

    1998-01-01

    Discusses a process of acculturation in three stages by which fledgling Writing Program Administrators can be transformed into change agents: (1) critically reading the program to locate key allies, potential advocates, and proven adversaries; (2) implementing changes on an infrastructural level to convert positive relations among colleagues into…

  19. 40 CFR 172.25 - Administration of State programs.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Administration of State programs. 172.25 Section 172.25 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE... upon the nature of the pest problem and the requirements of the testing program submitted. The...

  20. Administrator Perceptions of Transition Programs in International Secondary Schools

    Science.gov (United States)

    Bates, Jessica

    2013-01-01

    This study investigates the extent to which transition programs are offered to students at international secondary schools. Components of professional development, orientation and departure programs, and transition support teams were examined. Participants included school administrators at 11 international schools across five continents. Findings…

  1. 7 CFR 272.4 - Program administration and personnel requirements.

    Science.gov (United States)

    2010-01-01

    ... administration of the program shall be permitted access to food coupons, ATP's, or other issuance documents. (b...-language minority; and (iii) In project areas with a certification office that provides bilingual service... being sued because it misapplied Federal policy in administering the Program. (iii) State agencies shall...

  2. 42 CFR 457.40 - State program administration.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false State program administration. 457.40 Section 457.40 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance...

  3. Stamping the Earth from space

    CERN Document Server

    Dicati, Renato

    2017-01-01

    This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

  4. Relevant Adult Programs, Resilient Students, and Retention-Driven Administration

    Science.gov (United States)

    Beth Sullivan, Esther; Pagano, Rosanne V.

    2012-01-01

    In ten years, Alaska Pacific University has moved from a totally decentralized administration of its adult online program to a very centralized structure. Drastic changes in funding sources and student needs have compelled the university to take new approaches. As the learning landscape continues to shift for adults, online learners, and Alaska…

  5. 24 CFR 1003.206 - Program administration costs.

    Science.gov (United States)

    2010-04-01

    ... reasonable administrative costs and carrying charges related to the planning and execution of community... this section and in § 1003.205—Eligible planning, urban environmental design and policy-planning... documents related to the program for submission to HUD; (vii) Coordinating the resolution of audit and...

  6. Improvements Needed in Administration of the Guaranteed Student Loan Program.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    This report identifies improvements needed in administration of the guaranteed student loan program. Improvements needed are based on the fact that that lenders are not informed when student borrowers drop out of school. Alternatives for providing lenders with timely information on enrollment terminations are indicated. Additional administrative…

  7. Examining Community-Engaged Scholarship in Public Administration Programs

    Science.gov (United States)

    Norvell, Katrina Herndon

    2010-01-01

    This study sought to broaden the understanding of the role that academic professions play in shaping the values and attitudes of faculty toward CES. This study explored faculty perceptions regarding the factors that encourage or dissuade them in the pursuit of CES within public administration programs. As a framework for research, a conceptual…

  8. Development and Implementation of An Administrative Internship Program

    Directory of Open Access Journals (Sweden)

    Esther Wermuth

    2017-04-01

    Full Text Available This article describes the development and implementation of a pilot program to prepare teachers seeking New York state certification as school district administrators, by assigning them as administrative interns to a school district. The superintendent of a large urban school district and the director of a college program to prepare school district administrators partnered to design a pilot experiential course in which candidates for a master’s degree and state certificate would have an opportunity to develop skills and learn by experiencing situations that support new learning (Kolb, 1984, to take the place of an existing internship course for eight candidates. The dual purpose was to provide an authentic learning experience for the candidates and to provide actionable information for the superintendent for improvement of the district instructional program. To identify areas of academic concern, the candidates reviewed the New York State District Report Card1, conducted research, and interviewed district personnel in order to be able tomake actionable suggestions and recommendations to the superintendent that might result in academic improvement. Findings and recommendations to inform district improvement efforts and for improvement of the existing course were presented to the superintendent and his administrative staff. Recommendations are included.

  9. Small Business Administration (SBA) Loan Program Performance- Post-Charge Off Recovery Rates by Program

    Data.gov (United States)

    Small Business Administration — Reflects total post-charge off recovery rates, as a percent of the amounts charged off by charge off year, for the major loan programs and aggregate totals by charge...

  10. Perspectives on obesity programs at children's hospitals: insights from senior program administrators.

    Science.gov (United States)

    Eneli, Ihuoma; Norwood, Victoria; Hampl, Sarah; Ferris, Michelle; Hibbeln, Trillium; Patterson, Kellee; Pomietto, Maureen; Hassink, Sandra

    2011-09-01

    The obesity epidemic has resulted in an increasing number of children needing multidisciplinary obesity treatment. To meet this need, pediatric obesity programs have arisen, particularly in children's hospitals. In 2008, the National Association of Children's Hospitals and Related Institutions (NACHRI) convened FOCUS on a Fitter Future, a group drawn from NACHRI member institutions, to investigate the needs, barriers, and capacity-building in these programs. Senior administrators of the 47 NACHRI member hospitals that completed an application to participate in the FOCUS group were invited to complete a Web-based survey. The survey targeted 4 key areas: (1) perceived value of the obesity program; (2) funding mechanisms; (3) administrative challenges; and (4) sustainability of the programs. Nearly three-quarters of the respondents reported that their obesity programs were integrated into their hospitals' strategic plans. Obesity programs added value to their institutions because the programs met the needs of patients and families (97%), met the needs of health care providers (91%), prevented future health problems in children (85%), and increased visibility in the community (79%). Lack of reimbursement (82%) and high operating costs (71%) were the most frequently cited challenges. Respondents most frequently identified demonstration of program effectiveness (79%) as a factor that is necessary for ensuring program sustainability. Hospital administrators view tackling childhood obesity as integral to their mission to care for children. Our results serve to inform hospital clinicians and administrators as they develop and implement sustainable pediatric obesity programs.

  11. The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

    Energy Technology Data Exchange (ETDEWEB)

    Billingsley, Megan A.; Hoffman, Ian M.; Stuart, Elizabeth; Schiller, Steven R.; Goldman, Charles A.; LaCommare, Kristina

    2014-03-19

    End-use energy efficiency is increasingly being relied upon as a resource for meeting electricity and natural gas utility system needs within the United States. There is a direct connection between the maturation of energy efficiency as a resource and the need for consistent, high-quality data and reporting of efficiency program costs and impacts. To support this effort, LBNL initiated the Cost of Saved Energy Project (CSE Project) and created a Demand-Side Management (DSM) Program Impacts Database to provide a resource for policy makers, regulators, and the efficiency industry as a whole. This study is the first technical report of the LBNL CSE Project and provides an overview of the project scope, approach, and initial findings, including: • Providing a proof of concept that the program-level cost and savings data can be collected, organized, and analyzed in a systematic fashion; • Presenting initial program, sector, and portfolio level results for the program administrator CSE for a recent time period (2009-2011); and • Encouraging state and regional entities to establish common reporting definitions and formats that would make the collection and comparison of CSE data more reliable. The LBNL DSM Program Impacts Database includes the program results reported to state regulators by more than 100 program administrators in 31 states, primarily for the years 2009–2011. In total, we have compiled cost and energy savings data on more than 1,700 programs over one or more program-years for a total of more than 4,000 program-years’ worth of data, providing a rich dataset for analyses. We use the information to report costs-per-unit of electricity and natural gas savings for utility customer-funded, end-use energy efficiency programs. The program administrator CSE values are presented at national, state, and regional levels by market sector (e.g., commercial, industrial, residential) and by program type (e.g., residential whole home programs, commercial new

  12. National Aeronautics and Space Administration Science and Engineering Apprentice Program

    Science.gov (United States)

    1997-01-01

    The National Aeronautics and Space Administration's Science and Engineering Apprentice Program for high school students is one of NASA's many efforts toward a goal of scientific literacy. It embraces science, mathematics, and technology as keys to purposeful and sustained progress and security for our nation and its people. It serves as a model for helping reform education by striving to address mechanisms to influence the knowledge, skills, and attitudes of our students. It focuses on what to do today to meet the challenges of tomorrow.

  13. The U.S. food and drug administration's dosimetry program

    International Nuclear Information System (INIS)

    Baratta, E.

    2005-01-01

    Full text: The U. S. Public Health Service's (PHS) Food and Drug Administration (FDA) (part of the PHS) has had a Dosimetry Program at the Winchester Engineering and Analytical Center (WEAC) (formerly the Northeastern Radiological Health Laboratory). This Dosimetry Program has been in place since 1961. In 1967 it was augmented by the construction of a Whole Body Counter at WEAC for measuring internal dose. The FDA's Center for Medical Devices and Radiological Health had been handling these dosimeters since 1961 and in 2000 the WEAC took over total responsibility for this program for the FDA's Office of Regulatory affairs. This program was originally setup for the radiation workers (analysts and support personnel) and later included investigators personnel working in the medical and dental x-ray field. The field laboratories began using radionuclides in 1972 and were also issued radiation dosimeters. Investigators station at border import station alter 2003 were issued as well as radiation pages as a precaution when checking imported food and other FDA regulated products. This paper will discuss the results of radiation exposure received by analyst (including whole body measurements) at WEAC and field laboratories. Also discussed will be exposures to investigators in the medical and dental field. The exposure to the investigators at the import border stations will be included even though they have not been carrying dosimeters for slightly more than a year. In general, the exposures have been well below the Nuclear Regulatory Commission regulations for radiation workers. (author)

  14. Stamping SERS for creatinine sensing

    Science.gov (United States)

    Li, Ming; Du, Yong; Zhao, Fusheng; Zeng, Jianbo; Santos, Greggy M.; Mohan, Chandra; Shih, Wei-Chuan

    2015-03-01

    Urine can be obtained easily, readily and non-invasively. The analysis of urine can provide metabolic information of the body and the condition of renal function. Creatinine is one of the major components of human urine associated with muscle metabolism. Since the content of creatinine excreted into urine is relatively constant, it is used as an internal standard to normalize water variations. Moreover, the detection of creatinine concentration in urine is important for the renal clearance test, which can monitor the filtration function of kidney and health status. In more details, kidney failure can be imminent when the creatinine concentration in urine is high. A simple device and protocol for creatinine sensing in urine samples can be valuable for point-of-care applications. We reported quantitative analysis of creatinine in urine samples by using stamping surface enhanced Raman scattering (S-SERS) technique with nanoporous gold disk (NPGD) based SERS substrate. S-SERS technique enables label-free and multiplexed molecular sensing under dry condition, while NPGD provides a robust, controllable, and high-sensitivity SERS substrate. The performance of S-SERS with NGPDs is evaluated by the detection and quantification of pure creatinine and creatinine in artificial urine within physiologically relevant concentration ranges.

  15. A Needs Assessment of Aquaculture Extension Agents, Specialists, and Program Administrators in Extension Programming

    Science.gov (United States)

    Schwarz, Michael H.; Gibson, Jerry

    2010-01-01

    The study reported here identified continuing education and training needs of aquaculture Extension agents, specialists, and program administrators in 10 competency areas relating to the need for continuing education or training. Fourteen resources on the AquaNIC Web site were also evaluated, as was the efficacy of the AQUA-EXT listserv. Data were…

  16. Evolutions of Advanced Stamping CAE — Technology Adventures and Business Impact on Automotive Dies and Stamping

    Science.gov (United States)

    Wang, Chuantao (C. T.)

    2005-08-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness), (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines), (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping.

  17. Evolutions of Advanced Stamping CAE -- Technology Adventures and Business Impact on Automotive Dies and Stamping

    International Nuclear Information System (INIS)

    Wang Chuantao

    2005-01-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness) (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines) (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping

  18. An Analysis of the Educational and Administrative Effectiveness of the College in Escrow Program.

    Science.gov (United States)

    Raval, Bina D.

    1979-01-01

    Evaluates the program's educational and administrative effectiveness and its strengths and weaknesses as perceived by 50 participants in the Towson State University (Maryland) program. Also includes recommendations for improving the generally effective program. (SB)

  19. Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

    Directory of Open Access Journals (Sweden)

    Asiyeh Amouei

    2018-02-01

    Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

  20. Stamp Detection in Color Document Images

    DEFF Research Database (Denmark)

    Micenkova, Barbora; van Beusekom, Joost

    2011-01-01

    , moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

  1. Mentoring and Tutoring within Administrative Internship Programs in American Universities

    Science.gov (United States)

    Wilmore, Elaine L.; Bratlien, Maynard J.

    2005-01-01

    The article presents a significant national research project conducted by the authors and sponsored by the National Council of Professors of Educational Administration. It analyzes the varying aspects of administrative internships in American universities today. Professors of Educational Administration from around the nation were surveyed on-line…

  2. viStaMPS: The Application For Viewing And Manipulating StaMPS Results

    Science.gov (United States)

    Sousa, Joaquim; Sousa, Antonio; Magalhaes, Luis; Ruiz, Antonio

    2013-12-01

    viStaMPS (visual StaMPS) is a new visual application developed to enhance the visualization, manipulation and exportation of StaMPS results. The programmed application is developed in Matlab® through the Graphical User Interface (GUI) and no coding is required for running it, which avoids any programming language knowledge for standard uses. This tool integrates fully new features together with various scripts from StaMPS, allowing the generation of the desired plots/maps in a user-friendly interface. It is done by simply clicking some buttons or changing some parameters located in visual panels, instead of input commands in a prompt. Moreover, since it is written in Matlab, it gives the users the opportunity to access the data very easily and make their own modifications. Being a research tool, viStaMPS is continually under development and will count on the dynamism of its users to improve and/or add new features.

  3. Introduction to Administrative Programs that Mitigate the Insider Threat

    Energy Technology Data Exchange (ETDEWEB)

    Gerke, Gretchen K.; Rogers, Erin; Landers, John; DeCastro, Kara

    2012-09-01

    This presentation begins with the reality of the insider threat, then elaborates on these tools to mitigate the insider threat: Human Reliability Program (HRP); Nuclear Security Culture (NSC) Program; Employee Assistance Program (EAP).

  4. Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

    Science.gov (United States)

    Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

    2002-01-01

    The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

  5. METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

    Directory of Open Access Journals (Sweden)

    CARAUS MADALINA

    2015-12-01

    Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

  6. Administrator Perspectives of Ohio's Teacher Evaluation System: Implications for Educational Administration Programs in Higher Education

    Science.gov (United States)

    Williams, Nicole V.; Crates, Kathleen

    2015-01-01

    The purpose of this study was to elicit elementary and middle school administrators' perceptions of the Ohio Teacher Evaluation System (OTES). The researchers created a questionnaire to learn administrators' experiences with and attitudes, opinions, beliefs, and knowledge of OTES thus far. The questionnaire consisted of twenty-five Likert-based…

  7. Fast thermal nanoimprint lithography by a stamp with integrated heater

    DEFF Research Database (Denmark)

    Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

    2008-01-01

    We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

  8. Ex-Post : The Investment Performance of Collectible Stamps

    NARCIS (Netherlands)

    Dimson, E.; Spaenjers, C.

    2009-01-01

    This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

  9. Commission administration. National Low-Level Radioactive Waste Management Program

    International Nuclear Information System (INIS)

    1984-09-01

    This report is one in a series of commission option documents prepared for the US Department of Energy, designed to assist regional low-level waste compact commissions in their organization, administration and efforts to effectively manage waste within their regions. In particular, this report addresses topics related to commission administrative procedures, personnel, procurement and finance

  10. 75 FR 32341 - Import Administration IA ACCESS Pilot Program

    Science.gov (United States)

    2010-06-08

    ... from Mexico-- Administrative Review 07/01/08-06/30/09; A-201-836: Light-Walled Rectangular Pipe and... the People's Republic of China-- Administrative Review 01/31/08-07/31/09; A-570-922: Raw Flexible Magnets from the People's Republic of China-- New Shipper Review (Jingzhou Meihou Flexible Magnet Company...

  11. Bureau of Land Management: Improper Charges Made to Mining Law Administration Program

    National Research Council Canada - National Science Library

    2001-01-01

    The Bureau of Land Management's (BLM) Mining Law Administration Program (MLAP) is responsible for managing the environmentally responsible exploration and development of locatable minerals on public lands...

  12. Administration

    DEFF Research Database (Denmark)

    Bogen handler om den praksis, vi kalder administration. Vi er i den offentlige sektor i Danmark hos kontorfolkene med deres sagsmapper, computere, telefoner,, lovsamlinger,, retningslinier og regneark. I bogen udfoldes en mangfoldighed af konkrete historier om det administrative arbejde fra...... forskellige områder i den offentlige sektor. Hensigten er at forstå den praksis og faglighed der knytter sig til det administrative arbejde...

  13. Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

    International Nuclear Information System (INIS)

    Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

    2013-01-01

    The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

  14. Hot stamping advanced manufacturing technology of lightweight car body

    CERN Document Server

    Hu, Ping; He, Bin

    2017-01-01

    This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers...

  15. 76 FR 19998 - Supplemental Funding Under the Food and Drug Administration Pediatric Device Consortia Grant Program

    Science.gov (United States)

    2011-04-11

    ..., as part of the Food and Drug Administration Amendments Act of 2007 (FDAAA) legislation, Congress... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0012] Supplemental Funding Under the Food and Drug Administration Pediatric Device Consortia Grant Program AGENCY...

  16. Global Comparative Public Administration: Are Graduate Programs Responding to the Call?

    Science.gov (United States)

    Manoharan, Aroon P.; Mirbel, Wendel; Carrizales, Tony J.

    2018-01-01

    Within the past two decades, globalization has led to increased literature on comparative public administration (CPA) research, and it has enhanced analyses of administrative systems in various societies. Our paper examines CPA education among Master of Public Administration and Master of Public Policy programs in the United States. The findings…

  17. Older Adult Participation in Health Promotion Programs: Perspectives of Facility Administrators

    Science.gov (United States)

    Wright, Tim; Hyner, Gerald C.

    2011-01-01

    Administrators of older adult-centered facilities must identify barriers to the planning and implementation of health promotion programs. In this qualitative research those barriers were identified through in-depth interviews with administrators of older adult-centered facilities. As identified by administrators, the predominant barriers to the…

  18. 48 CFR 19.707 - The Small Business Administration's role in carrying out the program.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false The Small Business Administration's role in carrying out the program. 19.707 Section 19.707 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS The Small Business Subcontracting Program 19.707 The Small Busines...

  19. A Value-Added Approach to Selecting the Best Master of Business Administration (MBA) Program

    Science.gov (United States)

    Fisher, Dorothy M.; Kiang, Melody; Fisher, Steven A.

    2007-01-01

    Although numerous studies rank master of business administration (MBA) programs, prospective students' selection of the best MBA program is a formidable task. In this study, the authors used a linear-programming-based model called data envelopment analysis (DEA) to evaluate MBA programs. The DEA model connects costs to benefits to evaluate the…

  20. The Development and Validation of a Special Education Intelligent Administration Support Program. Final Report.

    Science.gov (United States)

    Utah State Univ., Logan. Center for Persons with Disabilities.

    This project studied the effects of implementing a computerized management information system developed for special education administrators. The Intelligent Administration Support Program (IASP), an expert system and database program, assisted in information acquisition and analysis pertaining to the district's quality of decisions and procedures…

  1. 77 FR 43639 - Privacy Act of 1974, as Amended; Computer Matching Program (Social Security Administration (SSA...

    Science.gov (United States)

    2012-07-25

    ...)/Department of Veterans Affairs (VA), Veterans Benefits Administration (VBA))--Match Number 1008 AGENCY: SSA... of an existing computer matching program that we are currently conducting with VA/VBA. DATES: We will... Benefits Administration (VBA) A. Participating Agencies SSA and VA/VBA. B. Purpose of the Matching Program...

  2. 77 FR 54943 - Privacy Act of 1974, as Amended; Computer Matching Program (Social Security Administration (SSA...

    Science.gov (United States)

    2012-09-06

    ...)/Department of Veterans Affairs (VA), Veterans Benefits Administration (VBA))--Match Number 1309 AGENCY: SSA... of an existing computer matching program that we are currently conducting with VA/VBA. DATES: We will... Benefits Administration (VBA). A. Participating Agencies SSA and VA/VBA. B. Purpose of the Matching Program...

  3. 75 FR 4963 - Federal Housing Administration (FHA): Hospital Mortgage Insurance Program-Refinancing Hospital Loans

    Science.gov (United States)

    2010-01-29

    ... Administration (FHA): Hospital Mortgage Insurance Program--Refinancing Hospital Loans; Proposed Rule #0;#0... Housing Administration (FHA): Hospital Mortgage Insurance Program--Refinancing Hospital Loans AGENCY.... SUMMARY: This rule proposes to revise the regulations governing FHA's Section 242 Hospital Mortgage...

  4. 78 FR 8329 - Federal Housing Administration (FHA): Hospital Mortgage Insurance Program-Refinancing Hospital Loans

    Science.gov (United States)

    2013-02-05

    ... Part 242 Federal Housing Administration (FHA): Hospital Mortgage Insurance Program--Refinancing Hospital Loans; Final Rule #0;#0;Federal Register / Vol. 78, No. 24 / Tuesday, February 5, 2013 / Rules and...-5334-F-02] RIN 2502-AI74 Federal Housing Administration (FHA): Hospital Mortgage Insurance Program...

  5. Administrators' Perceptions of Motives to Offer Online Academic Degree Programs in Universities

    Science.gov (United States)

    Özcan, Hakan; Yildirim, Soner

    2018-01-01

    Although the number of online academic degree programs offered by universities in Turkey has become increasingly significant in recent years, the current lack of understanding of administrators' motives that contribute to initiating these programs suggests there is much to be learned in this field. This study aimed to investigate administrators'…

  6. Administration

    OpenAIRE

    2009-01-01

    Cet imposant volume constitue un registre des cours magistraux tenus par l’auteur à l’École supérieure allemande des sciences administratives de Spire, enrichis des résultats de travaux scientifiques menés principalement à l'Institut Allemand de Recherche en Administration Publique (Deutsches Forschungsinstitut für öffentliche Verwaltung Speyer, FÖV). Il s’agit donc d’une entreprise au long cours, destinée à apporter un nouvel éclairage (quasi ?) exhaustif sur l’administration publique : son ...

  7. Hot stamping of AA7075 aluminum sheets

    Science.gov (United States)

    Mendiguren, J.; Saenz de Argandona, E.; Galdos, L.

    2016-11-01

    In this work the formability of a high strength aluminium alloy (AA7075-T6) for the stamping of an automotive component has been studied. Due to the low formability of the selected alloy, two different heat assisted forming strategies have been analysed. On the one hand, the W-temper process, where the thermal process is carried out prior to the forming operation. On the other hand, the hot stamping process, where the thermal process is carried out at the same time as the forming. The results showed that both technology were able to form the component avoiding any failure of the material. On the contrary, both processes reduced the final mechanical properties of the material compared to the as received material condition. However, the obtained mechanical properties doubled the strength of commonly used 5xxx and 6xxx aluminium alloys.

  8. SMALL BUSINESS ADMINISTRATION: 8(a) Is Vulnerable to Program and Contractor Abuse

    Science.gov (United States)

    1995-09-01

    Title: Small Business Administration 8(a) Is Vulnerable to Program and Contractor Abuse Personal Author: Wheeler, DJ.; Hunt, M.J.; Alsip, B...Member, Permanent Subcommittee on Investigations, Committee on Governmental Affairs, US Senate Descriptors, Keywords: Small Business Administration Program...and Economic Development Division SBA Small Business Administration SIC Standard Industrial Classification Page 18 GAO/OSI-95-15 8(a) Vulnerablility

  9. Ohio osteopathic residency directors' self-reported administrative knowledge and skills before and after participation in an administrative training program.

    Science.gov (United States)

    Sheehan, Olivia Ojano; Brannan, Grace

    2013-04-01

    Residency directors require myriad skills to perform their jobs efficiently. However, many residency directors receive no training prior to obtaining their positions. To determine the effectiveness of the Residency Directors Residency Administration Program (RD RAP)--a 1-year fellowship training program for Ohio osteopathic residency directors sponsored by the Ohio University Heritage College of Osteopathic Medicine/Centers for Osteopathic Research and Education--by measuring the administrative knowledge and skills of Ohio osteopathic residency directors before and after completion of the program. The authors administered a 54-item self-assessment instrument to RD RAP participants before and after the 2009-2010 and 2010-2011 programs. The assessment asked participants to rank their knowledge and skills in administration on a 5-point Likert scale, with lower values indicating higher knowledge and skills. We analyzed data from the pre- and postprogram assessments by using the Wilcoxon signed rank nonparametric test. The 54 assessment items were categorized into 10 content domains. Ten RD RAP participants completed the assessments. Median scores were statistically significantly lower for each of the 10 content domains after the RD RAP program. The content domain with the greatest change between pre- and postprogram assessment Likert scale scores was Legal Issues in Residency Training, with a median change of 1.7 (P=.007). Role of Program Directors, Personality, and Professional Development had the smallest change in pre- and postprogram assessment Likert scores, with a median change of 0.8 (P=.011). Statistically significant improvements were found in the osteopathic residency directors' self-reported administrative knowledge and skills after participation in the RD RAP.

  10. The School Administrator and the Food Service Program.

    Science.gov (United States)

    Perryman, John N.

    The aim of this publication is to offer information that will assist the elementary school principal in the establishment or improvement of a school lunch program. The material focuses on the necessary ingredients of an effective school food service, the necessity of nutrition education as a part of a food service program, and the importance of…

  11. DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

    Directory of Open Access Journals (Sweden)

    Rudi Kurniawan Arief

    2017-12-01

    Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

  12. Administrator Responses to Financial Incentives: Insights from a TIF Program

    Science.gov (United States)

    King Rice, Jennifer; Malen, Betty; Jackson, Cara; Hoyer, Kathleen Mulvaney

    2017-01-01

    This article provides evidence and generates insights about the power of financial rewards to motivate school administrators and the design features that influence their motivational potency. The multi-year mixed-methods study is grounded in expectancy and goal setting theories that suggest (a) awards must be salient and sizable enough to appeal…

  13. Federal Aviation Administration's behavioral research program for defense against hijackings.

    Science.gov (United States)

    Dailey, J T; Pickrel, E W

    1975-04-01

    Behavioral research has been significant contributions to the government's successful program for defense against hijackers. Today's boarding gate defenses have a leading role in that program, but they were rejected until creation of the behavioral profile made selective search feasible. Metal detectors now make search of all travelers practical but with increasing involvement of boarding gate employees, so a behavioral program is used to monitor their performance. Experience shows that some persons have penetrated boarding gate defenses, so another requirement was in-flight defenses. Flightpersonnel had defeated some past hijackers, so a behavioral analysis of past hijackings was used to identify tactics for in-flight defense. These were incorporated into training programs and distributed to all U.S. airlines, many government organizations, and foreign carriers. Research continues for updating these and developing new courses for special needs, such as defense against gangs.

  14. Federal Aviation Administration Curriculum Guide for Aviation Magnet Schools Programs

    Science.gov (United States)

    1994-01-01

    Prepared ca. 1994. This publication is designed to provide: : - a brief history of the role of aviation in motivating young : people to learn. : - examples of aviation magnet activities, programs, projects and : school curriculums. : - documentation ...

  15. Faculty Hiring at Top-Ranked Higher Education Administration Programs: An Examination Using Social Network Analysis

    Science.gov (United States)

    DiRamio, David; Theroux, Ryan; Guarino, Anthony J.

    2009-01-01

    Using network analysis we investigated faculty hiring at 21 U. S. News top-ranked programs in higher education administration. Our research questions were as follows. Do top programs hire from each other? Are faculty from the "outside" finding positions at top programs? Mixed results hint at implications for the "health" of the hiring network.…

  16. Academic Executive Programs in Public Administration and Management: Some Variety across Europe

    Science.gov (United States)

    Reichard, Christoph

    2017-01-01

    Universities and other higher education institutions in Europe offer a vast and increasing number of academic degree programs in the broad field of Public Administration. A subset of these programs is those offering postgraduate degrees to experienced students being already employed by public or private organisations. These executive programs are…

  17. Human Service Administrator Perceptions of Online MSW Degree Programs

    Science.gov (United States)

    Curran, Laura; Sanchez Mayers, Ray; Fulghum, Fontaine

    2017-01-01

    Online programs have proliferated rapidly in higher education, and this reality holds true for social work education as well. Employing a mixed methods design, this study looked at employer perceptions of online degrees compared to traditional degrees. Data was collected through an online survey that included Likert type and open-ended questions…

  18. How Do Stamp Duties Affect the Housing Market?

    OpenAIRE

    Davidoff, Ian; Leigh, Andrew

    2013-01-01

    Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

  19. 78 FR 64598 - Bank Enterprise Award (BEA) Program; Programmatic and Administrative Aspects; Public Comment Request

    Science.gov (United States)

    2013-10-29

    ... DEPARTMENT OF THE TREASURY Community Development Financial Institutions Fund Bank Enterprise Award (BEA) Program; Programmatic and Administrative Aspects; Public Comment Request AGENCY: Community... of the Community Development Financial Institutions Fund's (CDFI Fund) Bank Enterprise Award (BEA...

  20. A generic model for evaluation of the Federal Aviation Administration air traffic control specialist training programs.

    Science.gov (United States)

    1982-03-01

    The Systems Analysis Research Unit at the Civil Aeromedical Institute (CAMI) has developed a generic model for Federal Aviation Administration (FAA) Academy training program evaluation. The model will serve as a basis for integrating the total data b...

  1. UMTRA Project Administrative Files Collection Records Management Program

    International Nuclear Information System (INIS)

    1994-09-01

    The UPAFC Records Management Plan is based on the life cycle of a record - the evolution of a record from creation until final disposition. There are three major phases in the life cycle of a record: (1) creation and receipt, (2) maintenance and use, and (3) disposition. Accordingly, the Records Management Plan is structured to follow each of those phases. During each of the three phases, some kind of control is mandatory. The Records Management Plan establishes appropriate standards, policies, and procedures to ensure adequate control is always maintained. It includes a plan for records management, a plan for records management training activities, and a plan for auditing and appraising the program

  2. SMALL BUSINESS ADMINISTRATION: Case Studies Illustrate 8(a) Program and Contractor Abuse

    Science.gov (United States)

    1995-12-13

    Expected at 9:30 a.m., EST Wednesday December 13,1995 SMALL BUSINESS ADMINISTRATION Case Studies Illustrate 8(a) Program and Contractor Abuse...Pi^SE RETURN TO: V, GAO/T-OSI-96-1 Accession Number: 6025 Publication Date: Dec 01, 1995 Title: Small Business Administration : Case Studies...contract’s original classification code to one for which the firm qualified and altered the contract’s minimum value ^Small Business Administration ; 8

  3. Perceived Value of University-Based Continuing Education Leadership Development Programs for Administrators

    Science.gov (United States)

    Stone, Geri L.; Major, Claire H.

    2014-01-01

    This quantitative study, which involved development of a Value Creation Survey, examined the perceived value of leadership development programs (LDPs) provided by continuing higher education for administrators in colleges and universities. Participants were administrators at Association for Continuing Higher Education (ACHE) member institutions.…

  4. The Institute for School Administrators: A Program for Professional and Personal Growth. Conceptualization and Assessment.

    Science.gov (United States)

    Reed, Rodney J.

    The annual Institute for School Administrators, founded on Maslow's hierarchy of needs and Knowles' theory of adult learning, was initiated in 1979 at the University of California, Berkeley. After identifying participants' needs, a panel of school administrators and university professors develop the annual program. The Institute's general goals…

  5. A National Program to Expand Educational Opportunity in Hospital and Health Care Administration.

    Science.gov (United States)

    Association of Univ. Programs in Health Administration, Washington, DC.

    This report, prepared by the Association of University Programs in Hospital Administration (AUPHA), presents recommendations for increasing the representation of minorities in hospital and health-care administration careers on a nationwide basis. A short-term objective is to increase the representation of minorities in graduate degree programs…

  6. 20 CFR 418.3005 - Purpose and administration of the program.

    Science.gov (United States)

    2010-04-01

    ... and Human Services has responsibility for administration of the Medicare program, including the new.... 418.3005 Section 418.3005 Employees' Benefits SOCIAL SECURITY ADMINISTRATION MEDICARE SUBSIDIES... drug coverage for individuals who meet certain income and resources requirements under the law as...

  7. Bonneville Power Administration Wildlife Mitigation Program : Draft Environmental Impact Statement.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1996-08-01

    Bonneville Power Administration (BPA) is responsible for mitigating the loss of wildlife habitat caused by the development of the Federal Columbia River Power System. BPA accomplishes this mitigation by funding projects consistent with those recommended by the Northwest Power Planning Council (Council). The projects are submitted to the Council from Indian Tribes, state agencies, property owners, private conservation groups, and other Federal agencies. Future wildlife mitigation actions with potential environmental impacts are expected to include land acquisition and management, water rights acquisition and management, habitat restoration and enhancement, installation of watering devices, riparian fencing, and similar wildlife conservation actions. BPA needs to ensure that individual wildlife mitigation projects are planned and managed with appropriate consistency across projects, jurisdictions, and ecosystems, as well as across time. BPA proposes to standardize the planning and implementation of individual wildlife mitigation projects funded by BPA. Alternative 1 is the No Action alternative. Five standardizing alternatives are identified to represent the range of possible strategies, goals, and procedural requirements reasonably applicable to BPA-funded projects under a standardized approach to project planning and implementation. All action alternatives are based on a single project planning process designed to resolve site-specific issues in an ecosystem context and to adapt to changing conditions and information.

  8. 75 FR 52981 - Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-08-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Wackenhut Security, CR Associates, and Syncreon, Twinsburg, OH; Amended Certification Regarding...

  9. 75 FR 11913 - Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Sterling Heights, MI; Amended Certification Regarding Eligibility To Apply for Worker Adjustment...

  10. Design and Development of a Soap Stamping and Tableting ...

    African Journals Online (AJOL)

    A soap stamping and tableting machine comprising a printing die/pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205 soap tablets per hour with an ...

  11. School Administrators' Perceptions of a Principal Preparation Program after Participating in Portfolio Defenses

    Science.gov (United States)

    Armenta, Tony; DeVaney, Thomas

    2008-01-01

    A major recommendation, or mandate in some cases, handed down to principal preparation programs from accrediting agencies, state certication departments, or other bodies, is to prominently include school districts in the program. This might include Advisory Councils that include public school administrators, involving districts in the selection of…

  12. What Are the Perceptions of Administrators and Clinicians on an Effective Anti-Bully Prevention Program?

    Science.gov (United States)

    Bringas, Mary Elizabeth

    2017-01-01

    This qualitative case study examined the effective elements of a successful anti-bullying program through clinician and administrator perceptions. Previous studies have examined resources and interventions as curricular strategies, with some studies reflecting interventions as comprehensive programs; however, most studies do not provide…

  13. The Establishment and Administration of Operant Conditioning Programs in a State Hospital for the Retarded.

    Science.gov (United States)

    Ball, Thomas S., Ed.

    Seven articles treat the establishment of operant conditioning programs for the mentally retarded at Pacific State Hospital in California. Emphasis is on the administrative rather than the demonstration of research aspects of operant conditioning programs. Following an introduction and overview, the medical director's point of view on operant…

  14. Admission to the Master of Business Administration Program: An Alternative for Savannah State University

    Science.gov (United States)

    Dowling, Bill

    2009-01-01

    Traditionally, graduate programs in business administration have heavily relied on the Graduate Management Aptitude Test prepared and administered by the Educational Testing Service in the decision to admit a candidate to the program. The purpose of this paper is to review the literature regarding the statistical validity and statistical…

  15. Designing and implementing an undergraduate health administration program for nontraditional students.

    Science.gov (United States)

    Borkowski, Nancy; Gordon, Jean; Rushing, John

    2005-01-01

    This paper describes the development and implementation of an undergraduate health administration program for nontraditional students at a Hispanic serving institution. The program had to meet the needs of a diverse, adult student population, the local community, and the future leadership requirements of the healthcare industry. As such, the program was designed as a "bridge" for full-time employed healthcare licensed professionals seeking to complete a baccalaureate degree and obtain positions in the healthcare management field. It answered the call of the local community to strengthen partnerships between business and education by offering the program at healthcare employer worksites. Furthermore, the program addressed three needs of the healthcare industry: (1) the recognized shortage of future healthcare leaders, (2) the under-representation of minorities in the industry, and (3) proposed changes in health administration programs' curricula to focus on competencies in the areas of communication skills, decision making, ethical leadership, and self-development.

  16. Evaluation of the Super Efficient Refrigerator Program (SERP) in the Bonneville Power Administration service territory

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A.D.; Conger, R.L.

    1996-06-01

    The Super Efficient Refrigerator Program (SERP) is a collaborative utility program intended to transform the market for energy-efficient and environmentally friendly refrigerators. it is one of the first examples of large-scale {open_quotes}market transformation{close_quotes} energy efficiency program. This report documents the evaluation of SERP ({open_quotes}the Program{close_quotes}) in the Bonneville Power Administration`s (Bonneville`s) service territory. Pacific Northwest National Laboratory (PNNL) conducted this evaluation for Bonneville. This study includes the process evaluation, preliminary impact evaluation, and market transformation assessment. It is based on site visits and interviews with refrigerator dealers and manufacturers, industry data, and Bonneville information. Results from this study are compared with those from a parallel study that examines the Program across the 24 participating utilities.

  17. PROPOSAL FOR NEURAL-LINGUISTIC PROGRAMMING (N.L.P. INTHE ADMINISTRATIVE DEVELOPMENT OF LEADERSHIP SPORTS

    Directory of Open Access Journals (Sweden)

    Khalil Samira

    2010-08-01

    Full Text Available Neural-linguistic programming is an organised method to know the human self construction and dealing with it in fixed means and styles so as to decesisively affect the processes of perception, thinking, imaging, ideas,feeling and also in behavior, skills and the human body and mental performance (1 Neural-linguistic programming has a private nature because it is a group of mechanisms and practicaltechniques far from likeliness, so it enters in the circle of application and employment of the human abilities and possibilities. (9 Al Fiky (2001 points out that neural linguistic programming created the favourable environment to help individuals to get rid of their diseased fears and controlling in their negative reactions and thus improving communication with themselves and with others. He shows it took its way into the human life fields because itsways and strategies are used in the sectors of health, education, marketing and administration(2. The modern administration embarks on the human element that represents the most valuable elementsof administration and is the most effective on the productivity and with the increasing the effect of the human element in the efficacy of the administrative organizations, the need increased to consider the management of the human resources as an independent function of administrative functions that cancers the human element and onwhose efficiency, abilities, experience and zeal for work, the administration efficacy depends.

  18. Availability and Perceived Value of Masters of Business Administration Degree Programs in Pharmaceutical Marketing and Management

    Science.gov (United States)

    Clauson, Kevin A.; Latif, David A.

    2012-01-01

    Objectives. To examine pharmacist-targeted master of business administration (MBA) degree programs and investigate pharmacists’ perceptions regarding them. Methods. Specialized MBA programs in pharmaceutical marketing and management offered at US colleges and schools of pharmacy were identified in the literature and compared. Pharmacists’ perceptions of MBA programs were evaluated through a survey of clinical preceptors affiliated with a school of pharmacy. Results. Seven US universities that offer an MBA program in pharmaceutical marketing and management were identified. Thirty-three percent of the 57 pharmacist preceptors who responded to the survey reported plans to pursue an MBA degree program. Respondents preferred MBA programs related to healthcare or pharmacy (66%) over general MBA programs (33%). Conclusion. An MBA in pharmaceutical marketing and management could provide pharmacists with advanced knowledge of the operational and strategic business aspects of pharmacy practice and give pharmacy graduates an advantage in an increasingly competitive job market. PMID:22611273

  19. Availability and perceived value of masters of business administration degree programs in pharmaceutical marketing and management.

    Science.gov (United States)

    Alkhateeb, Fadi M; Clauson, Kevin A; Latif, David A

    2012-05-10

    To examine pharmacist-targeted master of business administration (MBA) degree programs and investigate pharmacists' perceptions regarding them. Specialized MBA programs in pharmaceutical marketing and management offered at US colleges and schools of pharmacy were identified in the literature and compared. Pharmacists' perceptions of MBA programs were evaluated through a survey of clinical preceptors affiliated with a school of pharmacy. Seven US universities that offer an MBA program in pharmaceutical marketing and management were identified. Thirty-three percent of the 57 pharmacist preceptors who responded to the survey reported plans to pursue an MBA degree program. Respondents preferred MBA programs related to healthcare or pharmacy (66%) over general MBA programs (33%). An MBA in pharmaceutical marketing and management could provide pharmacists with advanced knowledge of the operational and strategic business aspects of pharmacy practice and give pharmacy graduates an advantage in an increasingly competitive job market.

  20. A Qualitative Approach to Examining Knowledge Sharing in Iran Tax Administration Reform Program

    Directory of Open Access Journals (Sweden)

    Mehdi Shami Zanjanie

    2012-02-01

    Full Text Available The paper aims to examine knowledge sharing infrastructure of "Iran Tax Administration Reform Program". The qualitative approach by using case study method was applied in this research. In order to meet the research goal, four infrastructural dimensions of knowledge sharing were studied: leadership & strategy, culture, structure, and information technology. To the authors’ knowledge, this was maybe the first paper which examined knowledge sharing infrastructure in programs environment

  1. Early experiences of computer‐aided assessment and administration when teaching computer programming

    OpenAIRE

    Benford, Steve; Burke, Edmund; Foxley, Eric; Gutteridge, Neil; Zin, Abdullah

    1993-01-01

    This paper describes early experiences with the Ceilidh system currently being piloted at over 30 institutions of higher education. Ceilidh is a course‐management system for teaching computer programming whose core is an auto‐assessment facility. This facility automatically marks students programs from a range of perspectives, and may be used in an iterative manner, enabling students to work towards a target level of attainment. Ceilidh also includes extensive course‐administration and progre...

  2. Preventing errors in administration of parenteral drugs: the results of a four-year national patient safety program.

    NARCIS (Netherlands)

    Blok, C. de; Schilp, J.; Wagner, C.

    2013-01-01

    Objectives: To evaluate the implementation of a four-year national patient safety program concerning the parenteral drug administration process in the Netherlands. Methods: Structuring the preparation and administration process of parenteral drugs reduces the number of medication errors. A

  3. Weighing the Issues and Consequences of Federal Program Termination: Administration on Aging Support for Career Preparation.

    Science.gov (United States)

    Craig, Bruce M.

    1982-01-01

    Describes policy decisions that have acted upon the 1982 Fiscal Year budget and funding priorities of the Administration on Aging's Gerontology Career Preparation Program, and projects the probable consequences of the policy option now being weighed to eliminate all future funding. (University of Texas Press, Box 7819, Austin, TX 78712). (NJ)

  4. 76 FR 47228 - Redelegation of Authority to Office of Native American Program (ONAP) Area Office Administrators...

    Science.gov (United States)

    2011-08-04

    ... telephone number 1-800-877-8339. SUPPLEMENTARY INFORMATION: The management action plan (MAP) for Public and... Intent to Impose Remedies; and 13. Authority to waive the applicability of the Indian Housing Plan... Secretary for ONAP to an ONAP Area Office Administrator or other ranking program official. The power and...

  5. 24 CFR 200.935 - Administrator qualifications and procedures for HUD building products certification programs.

    Science.gov (United States)

    2010-04-01

    ... guidelines in any quality assurance review: (1) ASQC Q9000-1-1994 Quality Management and Quality Assurance... Systems—Model for Quality Assurance in Final Inspection and Test; (5) ASQC Q9004-1-1994 Quality Management...) Definitions—(1) Certification program (“program”). The procedure under which accepted administrators validate...

  6. The School Librarian as Program Administrator: Just-in-Time Librarianship

    Science.gov (United States)

    Yates, Steven D.

    2011-01-01

    By applying just-in-time philosophy to today's school libraries, librarians can fulfill the role of program administrator by continuing to provide the resources students and faculty deserve, exactly at their individual points of need. Just-in-time librarianship is a mindset that could prove unsettling for some school librarians. The main facets of…

  7. Limitations on Change: Current Conditions Influencing Academic Intransigence in Educational Administration Programs.

    Science.gov (United States)

    Logan, Connie Stokes; Pounder, Diana G.

    An analysis of academic intransigence (resistance to change) in educational administrative preparation programs is presented in this paper. Drawing upon two conceptual frameworks, the stakeholder perspective and Porter's (1980) five-force model of industry structure and competitive influence, two factors contributing to academic intransigence are…

  8. 48 CFR 18.114 - Contracting with the Small Business Administration (The 8(a) Program).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contracting with the Small Business Administration (The 8(a) Program). 18.114 Section 18.114 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES EMERGENCY ACQUISITIONS Available Acquisition Flexibilities 18.114...

  9. Adult Literacy Education Program Administrators' Perceptions of Occupational Stress and Coping Mechanisms

    Science.gov (United States)

    Engelmann, Stephanie

    2014-01-01

    Job performance may be adversely affected by stress. Job stress is a primary contributor to serious physical and emotional health consequences. This quantitative study examined adult literacy program administrator perceptions of occupational stress and coping mechanisms related to job satisfaction, job efficacy, career longevity, and overall…

  10. Facile stamp patterning method for superhydrophilic/superhydrophobic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Sungnam, E-mail: blueden@postech.ac.kr; Hwang, Woonbong, E-mail: whwang@postech.ac.kr [Department of Mechanical Engineering, POSTECH, Pohang 680-749 (Korea, Republic of)

    2015-11-16

    Patterning techniques are essential to many research fields such as chemistry, biology, medicine, and micro-electromechanical systems. In this letter, we report a simple, fast, and low-cost superhydrophobic patterning method using a superhydrophilic template. The technique is based on the contact stamping of the surface during hydrophobic dip coating. Surface characteristics were measured using scanning electron microscopy and energy-dispersive X-ray spectroscopic analysis. The results showed that the hydrophilic template, which was contacted with the stamp, was not affected by the hydrophobic solution. The resolution study was conducted using a stripe shaped stamp. The patterned line was linearly proportional to the width of the stamp line with a constant narrowing effect. A surface with regions of four different types of wetting was fabricated to demonstrate the patterning performance.

  11. A cracked beam or plate transversely loaded by a stamp

    Science.gov (United States)

    Nied, H. F.; Erdogan, F.

    1979-01-01

    In this paper the problem of an infinite elastic beam or a plate containing a crack is considered. The medium is loaded transversely through a stamp which may be rigid or elastic. The problem is a coupled crack-contact problem which cannot be solved by treating the crack and contact problems separately and by using a superposition technique. First the Green's functions for the general case are obtained. Then the integral equations for a cracked infinite strip loaded by a frictionless stamp are obtained. With the question of fracture in mind, the primary interest in the paper has been in calculating the stress intensity factors. The results are given for a rigid flat stamp with sharp edges and for an elastic curved stamp. The effect of friction at the supports on the stress intensity factors is also studied and a numerical example is given.

  12. design and development of a soap stamping and tableting machine

    African Journals Online (AJOL)

    2012-07-02

    pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205.

  13. Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

    OpenAIRE

    Wood, Gavin A.

    1994-01-01

    The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

  14. 78 FR 11967 - Supplemental Nutrition Assistance Program (SNAP): Updated Trafficking Definition and Supplemental...

    Science.gov (United States)

    2013-02-21

    ... indirect impact that would reduce the purchase of sugary drinks is positive. Prohibiting purchase of..., remove the words ``the Food Stamp Program'', ``the food stamp program'', The Food Stamp Program'', or ``FSP'' wherever they appear and add, in their place, the word ``SNAP''; 0 b. Remove the words ``a food...

  15. Workshops on tamper-indicating device (TID) programs and program administration

    International Nuclear Information System (INIS)

    Key, C.; Dickman, D.A.; Amacker, O.P. Jr.

    1996-01-01

    The US/Russia Government-to-Government Cooperative Program for Material Protection, Control and Accounting (MPC and A) was established in an agreement between the Department of Defense of the US and the Ministry of the Russian Federation for Atomic Energy (MINATOM). The goal of this program is to attain certain rapid progress in the improvement of nuclear material protection, control, and accounting in the Russian nuclear complex. One program element of materials control and accounting (MC and A) in the US is the use of tamper-indicating devices (TIDs) as a layer of defense in depth protection against possible theft and/or diversion of nuclear materials. A TID Workshop was developed in the US for implementation throughout Russia as a means for MPC and A. This paper describes the development, implementation, and results to date of the TID Workshops

  16. Risk Management for Study Abroad Programs: Issues and Resources to Inform Program Development, Administration, and Training

    Science.gov (United States)

    Rhodes, Gary

    2014-01-01

    This chapter provides a practical background to the health and safety risks and challenges for U.S. colleges and universities and other program providers. Potential risks, field-based guidelines, good practices, and resources to support the management of risks by study abroad offices will be covered.

  17. National Nuclear Security Administration Nonproliferation Graduate Fellowship Program Annual Report in Brief: October 2007 - May 2008

    Energy Technology Data Exchange (ETDEWEB)

    Berkman, Clarissa O.; Fankhauser, Jana G.; Sandusky, Jessica A.

    2009-05-01

    This abbreviated Annual Report covers program activities of the National Nuclear Security Administration (NNSA) Nonproliferation Graduate Fellowship Program (NGFP) from October 2007 through May 2008--the timeframe between the last Annual Report (which covered activities through September 2007) and the next report (which will begin with June 2008 activities). In that timeframe, the NGFP continued building a solid foundation as the program began reaping the benefits of recently implemented changes. This report is organized by Fellowship class and the pertinent program activities for each, including: October 2007 Recruiting events and final applications (Class of 2008) Winter 2007 Selection and hiring (Class of 2008) Spring 2008 Career development roundtables (Class of 2007) Orientation planning (Class of 2008) Recruitment planning and university outreach (Class of 2009) May 2008 Closing ceremony (Class of 2007)

  18. 78 FR 102 - Guidance for Industry and Food and Drug Administration Staff; eCopy Program for Medical Device...

    Science.gov (United States)

    2013-01-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-1056] Guidance for Industry and Food and Drug Administration Staff; eCopy Program for Medical Device Submissions; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  19. 77 FR 63837 - Draft Guidance for Industry and Food and Drug Administration Staff; eCopy Program for Medical...

    Science.gov (United States)

    2012-10-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-1056] Draft Guidance for Industry and Food and Drug Administration Staff; eCopy Program for Medical Device Submissions; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and...

  20. 43 CFR 404.51 - Are proposed projects under the Rural Water Supply Program reviewed by the Administration?

    Science.gov (United States)

    2010-10-01

    ... Water Supply Program reviewed by the Administration? 404.51 Section 404.51 Public Lands: Interior... SUPPLY PROGRAM Feasibility Studies § 404.51 Are proposed projects under the Rural Water Supply Program... the Reclamation's Rural Water Supply Program. This includes review under Executive Order 12322 to...

  1. Private Administration – Favorable Environment for Implementing Programs and Campaigns of Public Relations?

    Directory of Open Access Journals (Sweden)

    Simona HAIDAU

    2012-11-01

    Full Text Available This paper refer to decision of the private administration organizations from the region northeast of Romania to implement programs and public relations campaigns from the socio-economic context in the current period. This decision of organizations above mentioned is strongly influenced by nature non-profit purposes they have, more precisely, to be involved in carrying out the public interest or community.

  2. Building Energy Asset Score for Utilities and Energy Efficiency Program Administrators

    Energy Technology Data Exchange (ETDEWEB)

    Building Technologies Office

    2015-01-01

    The Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use. This fact sheet discusses the value of the score for utilities and energy efficiency program administrators.

  3. Physiological and Environmental Sensor Skin Stamp

    Data.gov (United States)

    National Aeronautics and Space Administration — Future exploration missions will require astronauts to autonomously monitor physiological and atmospheric conditions. Recent technological advances in the developing...

  4. Increasing NPS Enrollment: A Cost-Benefit Analysis of Implementing Distributed Learning and the Masters of Business Administration Programs

    Science.gov (United States)

    2001-12-01

    This thesis examines the effects of the Distributed Learning (DL) and Masters of Business Administration (MBA) programs on NPS enrollment. In recent...NPS enrollment: Distributed Learning (DL), and the Masters of Business Administration (MBA) programs. Our objective was to provide NPS leadership with

  5. Development of an administrative system for an integral program of safety and occupational hygiene

    International Nuclear Information System (INIS)

    Dominguez R, J.

    2004-01-01

    The objective of the present investigation thesis will be to provide a clear application of the basic elements of the administration for the elaboration of an integral program of security and occupational hygiene that serves like guide for the creation of new programs and of an internal integral regulation, in the matter. For the above mentioned the present work of thesis investigation besides applying those basic elements of the integral administration will be given execution to the normative one effective as well as the up-to-date concepts of security and hygiene for that the present thesis will be based on these premises that guided us for the elaboration of the program of security and occupational hygiene and that it will serve like base to be applied in all the areas of the National Institute of Nuclear Research and in special in those that are certifying for the system of administration of quality ISO 9001:2000 that with their implantation the objectives were reached that the Institute it has been traced in their general politics. It is necessary to make mention that the Institute has a primordial activity that is the one of to make Research and Development in nuclear matter for the peaceful uses of the nuclear energy, for that that with a strong support of the conventional areas of the type industrial the institutional objectives are achieved, for what is in these areas where the present thesis investigation is developed, without stopping to revise and to apply the nuclear normativity. (Author)

  6. "Stamp-off" to micropattern sparse, multicomponent features.

    Science.gov (United States)

    Desai, Ravi A; Rodriguez, Natalia M; Chen, Christopher S

    2014-01-01

    Spatially patterned subtractive de-inking, a process we term "stamp-off," provides a simple method to generate sparse, multicomponent protein micropatterns. It has been applied to control cell adhesion, study adhesion biology, as well as to micropattern fragile surfaces. This technique can also readily be applied to study nanoscale interactions between cell membrane receptors and surface-immobilized ligands. It is based on conventional microcontact printing and as such requires the same reagents, including photolithographically defined masters, a spin-coater, poly(dimethyl siloxane) (PDMS), and conventional cell culture reagents such as glass coverslips and adhesive proteins. Stamp-off is conceptually simplified into three steps: (1) generation of an appropriate cell culture substrate, PDMS-coated glass, (2) micropatterning with stamp-off, and (3) cell deposition. After elaborating each of these three methods, we discuss limitations of the technique and its applications. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Optimum utilization of low ash carbonaceous constituents in stamp charging

    Energy Technology Data Exchange (ETDEWEB)

    Dash, P.S.; Krishnan, S.H.; Sharma, R. [Tata Steel, Jamshedpur (India)

    2004-07-01

    To produce high strength coke at reasonable cost, Tata Steel went for stamp charging along with 40-45% imported coal. It is imperative to design the base stamp charge coal blend so as to possess enough fluidity to assimilate these infusible inerts and still produce coke with high coke strength after reaction (CSR). This paper describes the scope of utilising low ash carbonaceous inerts like fluid coke (a petroleum coke made in a fluidized bed) and anthracite optimally in the stamp charging blend by replacing the present imported semi-soft coal with high fluidity imported coals. The laboratory scale experimentation and its results regarding improvement in coke properties and yield are also described. 5 refs., 2 figs., 3 tabs.

  8. Time Stamp Synchronization of PEFP Distributed Control Systems

    International Nuclear Information System (INIS)

    Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

    2010-01-01

    Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

  9. Do Food Stamps without Education Improve the Nutrient Intake and Food-Related Behaviors of Recipients? Food Assistance Needs of the South's Vulnerable Populations.

    Science.gov (United States)

    Cason, Katherine L.; Cox, Ruby H.; Burney, Janie L.

    This study examined the effect of food assistance on the dietary patterns of households in South Carolina, Tennessee, and Virginia. Data was collected from 6,969 participants in the Expanded Food and Nutrition Education Program (EFNEP) and 3,552 participants in the Food Stamp Nutrition Education Program (FSNEP). EFNEP and FSNEP teach low-income…

  10. Introducing patient safety to undergraduate medical students--a pilot program delivered by health care administrators.

    Science.gov (United States)

    Leung, Gilberto Ka Kit; Patil, Nivritti Gajanan; Ip, Mary Sau Man

    2010-01-01

    Identifying informed and interested staff to teach patient safety can be difficult. We report our experiences with a lecture-based program on patient safety delivered by health care administrators. A self-administered questionnaire survey on patient safety culture was given to 130 third-year medical students before ('pre-test') and at 3 months after ('post-test') the program. The latter consisted of two 60-minute whole-class lectures using contemporary medical incidents in this locality as illustrative cases. Thirteen of the 23 questionnaire items (56.5%) showed statistically significant changes at the post-test. Students became more appreciative of the notions that errors were inevitable, and that disciplinary actions and 'being more careful' may not be the most effective strategies for the prevention of error. Issues concerning error reporting were more resistant to our educational intervention. Students regarded patient safety as an important topic that should be included in undergraduate teaching and professional examinations. The implementation of a patient safety curriculum should be tailored to an institution's needs, limitations, and culture. Health care administrators were found to be effective faculties. A brief lecture-based program could be integrated readily into an existing curriculum, and was found to produce at least short-term, positive changes.

  11. Accessing Secondary Markets as a Capital Source for Energy Efficiency Finance Programs: Program Design Considerations for Policymakers and Administrators

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Martin, E. Fadrhonc [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Thompson, P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goldman, C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-02-01

    Estimates of the total opportunity for investment in cost-effective energy efficiency in the United States are typically in the range of several hundred billion dollars (Choi Granade, et al., 2009 and Fulton & Brandenburg, 2012).1,2 To access this potential, many state policymakers and utility regulators have established aggressive energy efficiency savings targets. Current levels of taxpayer and utility bill-payer funding for energy efficiency is only a small fraction of the total investment needed to meet these targets (SEE Action Financing Solutions Working Group, 2013). Given this challenge, some energy efficiency program administrators are working to access private capital sources with the aim of amplifying the funds available for investment. In this context, efficient access to secondary market capital has been advanced as one important enabler of the energy efficiency industry “at scale.”3 The question of what role secondary markets can play in bringing energy efficiency to scale is largely untested despite extensive attention from media, technical publications, advocates, and others. Only a handful of transactions of energy efficiency loan products have been executed to date, and it is too soon to draw robust conclusions from these deals. At the same time, energy efficiency program administrators and policymakers face very real decisions regarding whether and how to access secondary markets as part of their energy efficiency deployment strategy.

  12. What Do Schools Want? Assessing Elementary School Administrator and Teacher Preferences Related to Nutrition Education Program Scheduling

    Science.gov (United States)

    Hermann, Janice; Parker, Stephany; Phelps, Josh; Brown, Barbara

    2011-01-01

    Extension is positioned to provide school-based nutrition education programs as required by the 2004 Child Nutrition and WIC Reauthorization Act. To enhance program acceptance and sustainability, it is important to consider school administrators' and teachers' interests and preferences regarding nutrition education programming. The project…

  13. Investigation of administrative obstacles to family physician program in urban areas of Iran

    Directory of Open Access Journals (Sweden)

    Javad Javan noughabi

    2017-06-01

    Full Text Available Health is regarded as one of the basic rights of each person in society; so governments are obligated to provide it equally for everyone. The best way to achieve this goal is the establishment of health insurance with the orientation of family physician and the strategic referral system. Yet, such programs will not be successful without encouraging people to participate and changing social behaviors. The aim of the present study was to investigate the administrative obstacles and problems to family physician program in urban areas of Iran. This study was a qualitative research conducted. A purposive sampling method was employed and the data were gathered via semi-structured interview with open-ended questions and document examination. All the interviews were recorded digitally and immediately transcribed verbatim. They were finally analyzed based on framework analysis. The participants' detailed descriptions showed that systemic, environmental, and human related factors were the main obstacles to the implementation of family physician plan. Since the success and performance of each program effectively cannot be obtained without people’s acceptance and collaboration, the necessity of training and giving information rapidly and timely to the residents in urban areas is felt more than ever. Also, making authorities aware of the obstacles expressed by people can be helpful in harmonizing the program with people’s requests; and can result in overcoming the challenges and obstacles facing the program.

  14. Improving perceptions of teamwork climate with the Veterans Health Administration medical team training program.

    Science.gov (United States)

    Carney, Brian T; West, Priscilla; Neily, Julia B; Mills, Peter D; Bagian, James P

    2011-01-01

    There are differences between nurse and physician perceptions of teamwork. The purpose of this study was to determine whether these differences would be reduced with medical team training (MTT). The Safety Attitudes Questionnaire was administered to nurses and physicians working in the operating rooms of 101 consecutive hospitals before and at the completion of an MTT program. Responses to the 6 teamwork climate items on the Safety Attitudes Questionnaire were analyzed using nonparametric testing. At baseline, physicians had more favorable perceptions on teamwork climate items than nurses. Physicians demonstrated improvement on all 6 teamwork climate items. Nurses demonstrated improvement in perceptions on all teamwork climate items except "Nurse input is well received." Physicians still had a more favorable perception than nurses on all 6 teamwork climate items at follow-up. Despite an improvement in perceptions by physicians and nurses, baseline nurse-physician differences persisted at completion of the Veterans Health Administration MTT Program.

  15. Experience of health-system pharmacy administration residents in a longitudinal human resource management program.

    Science.gov (United States)

    Amerine, Lindsey B Poppe; Granko, Robert P; Savage, Scott W; Daniels, Rowell; Eckel, Stephen F

    2014-12-15

    The experience of health-system pharmacy administration (HSPA) residents in a longitudinal human resource (HR) management program is described. The subsequent benefits to the residents, department, and profession are also discussed. Postgraduate year 2 HSPA residents at an academic medical center desired more responsibility for managing an operational area. To this end, a program was created in which these residents directly manage a small group of pharmacy technicians and report to a clinical manager or assistant director with oversight responsibility. These "resident managers" are responsible, under the direction of the area's clinical manager, for the personnel, schedule, time and attendance, and HR activities of the area. Resident managers have led and sustained operational improvement projects in their areas. In addition to providing learning experiences to residents, the HSPA residency program has also improved the operations of the areas in which these residents work. Benefits to the residents include conducting annual performance evaluations for employees with whom they have a relationship as it is a task every administrator completes. Resident managers at UNC have consistently stated that this longitudinal HR experience is one of the most rewarding and most challenging experiences offered in the two-year HSPA residency. The involvement of HSPA residents in longitudinal management responsibilities furthers residents' leadership success by providing trained managers who are ready to immerse themselves into practice postresidency, having employee engagement and HR skills as well as experiences with leading operational improvements. A longitudinal HR management experience was successfully incorporated into an HSPA residency combined Master of Science degree program. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  16. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; Wazny, Scott; Kaunitz, Leon; Waldron, Douglas J.

    2006-02-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir welded aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  17. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; wazny, scott; Kaunitz, Leon; Waldron, D.

    2005-04-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arrise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir woined, aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  18. Modelling the deformation process of flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard

    The present thesis is devoted to numerical modelling of the deformation process of flexible stamps for nanoimprint lithography (NIL). The purpose of those models is to be able to predict the deformation and stretch of the flexixble stamps in order to take that into account when designing the plan...... 2D silicon master used in the NIL process. Two different manufacturing processes are investigated; (i) Embossing of an electroplated nickel foil into a hydrogen silsesquioxane (HSQ) polymer resist on a double-curved surface, (ii) NIL of a flexible polytetrafluoroethylene (PTFE) stamps...... into a polymethyl methacrylate (PMMA) resist. Challenges comprise several non-linear phenomena. First of all geometrical non-linearities arising from the inherent large strains and deformations during the process are modelled. Then, the constitutive behaviors of the nickel foil and the PTFE polymer during...... deformation are addressed. This is achieved by a general elasto-plastic description for the nickel foil and a viscoelastic-viscoplastic model for the PTFE material, in which the material parameters are found. Last, the contact conditions between the deforming stamp and the injection moulding tool insert...

  19. 46 CFR 53.10-10 - Certification by stamping.

    Science.gov (United States)

    2010-10-01

    ... boilers shall be as indicated in HG-530 of section IV of the ASME Boiler and Pressure Vessel Code... 46 Shipping 2 2010-10-01 2010-10-01 false Certification by stamping. 53.10-10 Section 53.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Tests...

  20. 41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

  1. 26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Unauthorized use or sale of stamps. 301.7209-1... § 301.7209-1 Unauthorized use or sale of stamps. (a) Any person who buys, sells, offers for sale, uses... regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

  2. Evaluation of mass drug administration in the program to control imported lymphatic filariasis in Thailand.

    Science.gov (United States)

    Toothong, Tanaporn; Tipayamongkholgul, Mathuros; Suwannapong, Nawarat; Suvannadabba, Saravudh

    2015-09-28

    Migration plays a major role in the emergence and resurgence of lymphatic filariasis (LF) in many countries. Because of the high prevalence of Imported Bancroftian Filariasis (IBF) caused by nocturnally periodic Wuchereria bancrofti and the intensive movement of immigrant workers from endemic areas, Thailand has implemented two doses of 6 mg/kg diethylcarbamazine (DEC) with interval of 6 months to prevent IBF. In areas where immigrants are very mobile, the administration of DEC may be compromised. This study aimed to evaluate DEC administration and its barriers in such areas. A cross-sectional study with two-stage stratified cluster sampling was conducted. We selected Myanmar immigrants aged >18 years from factory and fishery areas of Samut Sakhon Province for interview with a structured questionnaire. We also interviewed health personnel regarding the functions of the LF program and practice of DEC delivery among immigrants. Associations were measured by multiple logistic regression, at P Incorrect perceptions about the side-effects of DEC also obstructed DEC access for Myanmar immigrants. All positive LF antigenic immigrants reported visiting and emigrating from LF-endemic areas. Hospital-based DEC administration was an inappropriate approach to DEC delivery in areas with highly mobile Myanmar immigrants. Incorporating health-center personnel in DEC delivery twice yearly and improving the perceptions of DEC side effects would likely increase DEC coverage among Myanmar immigrants.

  3. Reducing Medication Administration Errors in Acute and Critical Care: Multifaceted Pilot Program Targeting RN Awareness and Behaviors.

    Science.gov (United States)

    Durham, Marianne L; Suhayda, Rosemarie; Normand, Patricia; Jankiewicz, Ann; Fogg, Louis

    2016-02-01

    The aim of this medication safety pilot program was to increase RN sensitivity to potential error risk, improve behaviors, and reduce observed medication administration errors (MAEs). MAEs are common and preventable and may lead to adverse drug events, costing the patient and organization. MAEs are low visibility, rarely intercepted, and underreported. An interprofessional team used process improvement methodology to develop a human factors-based medication safety pilot program to address identified issues. An observational time-series design study monitored the effect of the program. After the program, error interception practices during administration increased, and some nurses reported using a mindfulness strategy to gain situational awareness before administration. Process behaviors were performed more consistently, and the risk of MAE decreased. Familiarity and complexity were identified as additional variables affecting MAE outcome. Strategies to support safe medication administration may reduce error and be of interest to nurse leaders.

  4. Confinement of Military Prisoners and Administration of Military Correctional Programs and Facilities, Directive No. 1325.4

    National Research Council Canada - National Science Library

    2001-01-01

    This directive reissues DoD Directive 1325.4, dated 28 September 1999 (hereby cancelled) to update policy and responsibilities for the administration and operation of military correctional programs and facilities under Title 10, USC...

  5. Women: Putting Our Stamp on America

    National Research Council Canada - National Science Library

    1999-01-01

    .... SCOPE The Topical Research Intern Program provides the opportunity for servicemembers and DOD civilian employees to work on diversity/equal opportunity projects while on a 30-day tour of duty at the Institute...

  6. Small Business Administration (SBA) Loan Program Performance- Charge Off Rates as a Percent of Unpaid Principal Balance (UPB) Amount by Program

    Data.gov (United States)

    Small Business Administration — Reflects charge off rates, as a percent of the UPB amounts, at the end of the fiscal year for the major loan programs and aggregate totals for the small direct and...

  7. Report to Congress on the National Highway Traffic Safety Administration ITS Program : program progress during 1992-1996 and strategic plan for 1997-2002

    Science.gov (United States)

    1997-01-01

    Congress recently requested the Intelligent Transportation Systems (ITS) Joint Program Office and the National Highway Traffic Safety Administration to update the 1992 ITS plan to deal with the fiscal year 1997 through fiscal year 2002 period, and...

  8. Grande Ronde Model Watershed Program Administration and Habitat Projects, Annual Progress Report, Project Period: Program Administration: January 1, 1997 - December 31, 1997 Habitat Projects: January 1, 1997 - March 31, 1998.

    Energy Technology Data Exchange (ETDEWEB)

    Noyes, Cecilia; Kuchenbecker, Lyle; Perry, Patty

    1998-10-28

    This agreement provided funding for operation and administration of the Grande Ronde Model Watershed Program including staffing of an Executive Director, Program Planner, and clerical personnel. The contract covers maintaining program services, project planning, subwatershed plans (CRMP's), public involvement and education, interagency coordination/clearing house, monitoring, and technical support activities that have taken place in the Grande Ronde basin. Cost-share has been received from the Bureau of Reclamation and the Governor's Watershed Enhancement Board.

  9. Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

    International Nuclear Information System (INIS)

    Meng Fantao; Chu Jinkui; Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak; Maximov, Ivan; Montelius, Lars; Xu, H Q; Nilsson, Lars

    2011-01-01

    Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

  10. 44 CFR 4.7 - How does the Administrator communicate with State and local officials concerning FEMA's programs...

    Science.gov (United States)

    2010-10-01

    ... communicate with State and local officials concerning FEMA's programs and activities? 4.7 Section 4.7 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY....7 How does the Administrator communicate with State and local officials concerning FEMA's programs...

  11. Quantitative Research Methods Training in Education Leadership and Administration Preparation Programs as Disciplined Inquiry for Building School Improvement Capacity

    Science.gov (United States)

    Bowers, Alex J.

    2017-01-01

    The quantitative research methods course is a staple of graduate programs in education leadership and administration. Historically, these courses serve to train aspiring district and school leaders in fundamental statistical research topics. This article argues for programs to focus as well in these courses on helping aspiring leaders develop…

  12. Guidelines for the Administration of Educational Programs for Students Who Are Deaf/Hard of Hearing, Visually Impaired, or Deafblind

    Science.gov (United States)

    Bruce, Susan; Ferrell, Kay; Luckner, John L.

    2016-01-01

    This paper presents the essential programming components resulting from a systematic review of research studies, legislation, and policy documents on the topic of administration issues in educational programming for students who are deaf/hard of hearing, visually impaired, or deafblind. It is recommended that educational teams should include a…

  13. Valuation of selected environmental impacts associated with Bonneville Power Administration Resource Program alternatives

    International Nuclear Information System (INIS)

    Englin, J.E.; Gygi, K.F.

    1992-03-01

    This report documents work undertaken by the Pacific Northwest Laboratory (PNL) and its contractors to assist the Bonneville Power Administration (Bonneville) in assessing the potential environmental consequences of new power resources. A major purpose of this effort is to describe and evaluate the techniques available for economic valuation of environmental costs. Another is to provide estimates of the environmental costs associated with specific power resources called for under Bonneville's Resource Programs. Bonneville's efforts to extend valuation techniques to as many impacts as can be reliably assessed represents a substantial advance in the application of state-of-the-art economic techniques to environmental assessments. This economic analysis evaluates effects on human health, wildlife, crops, and visibility impacts associated with air pollution. This report also discusses river recreation (primarily fishing) which may be affected by fluctuations in water levels. 70 refs

  14. Proposed framework for the Western Area Power Administration Environmental Risk Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Glantz, C.S.; DiMassa, F.V.; Pelto, P.J.; Brothers, A.J. [Pacific Northwest Lab., Richland, WA (United States); Roybal, A.L. [Western Area Power Administration, Golden, CO (United States)

    1994-12-01

    The Western Area Power Administration (Western) views environmental protection and compliance as a top priority as it manages the construction, operation, and maintenance of its vast network of transmission lines, substations, and other facilities. A recent Department of Energy audit of Western`s environmental management activities recommends that Western adopt a formal environmental risk program. To accomplish this goal, Western, in conjunction with Pacific Northwest Laboratory, is in the process of developing a centrally coordinated environmental risk program. This report presents the results of this design effort, and indicates the direction in which Western`s environmental risk program is heading. Western`s environmental risk program will consist of three main components: risk communication, risk assessment, and risk management/decision making. Risk communication is defined as an exchange of information on the potential for threats to human health, public safety, or the environment. This information exchange provides a mechanism for public involvement, and also for the participation in the risk assessment and management process by diverse groups or offices within Western. The objective of risk assessment is to evaluate and rank the relative magnitude of risks associated with specific environmental issues that are facing Western. The evaluation and ranking is based on the best available scientific information and judgment and serves as input to the risk management process. Risk management takes risk information and combines it with relevant non-risk factors (e.g., legal mandates, public opinion, costs) to generate risk management options. A risk management tool, such as decision analysis, can be used to help make risk management choices.

  15. Change of nuclear administrative system and long-term program for nuclear energy in Japan

    International Nuclear Information System (INIS)

    Yun, S. W.; Yang, M. H.; Jeong, H. S.

    2001-01-01

    Japanese new governmental adminstrative system was restructured and became in operation from January 1, 2001 including newly establishment of the Ministry of Cabinet. Accordingly, Japanese nuclear administrative system were also changed significantly, in order to reflect the changing policy environment and response to them more efficiently in the use and development of nuclear energy. Atomic Energy Commission, Nuclear Safety Commission administrated by Science and Technology Agency in the past, were moved to the Ministry of Cabinet, and Integrated Science and Technology Council was also newly established under the Ministry of Cabinet. And Ministry of Economy, Trade and Industry(METI) is in charge of nuclear energy policy and the Ministry of Education, Culture, Sports, Science and Technology(MEXT) is in charge of nuclear academic science consequently. At the same time, the revision work of 'Long-term Program for Research, Development and Utilization of Nuclear of Japan' established in 1994, has been carried out from 1999 in order to set up the long term based national nuclear policy towards the 21st century, and finally the results were open to the public in November 2000. Major changes of nuclear policy of Japan the will be good references in the establishing future national nuclear policy for the use and development of nuclear energy

  16. Soil Temperature and Moisture Profile (STAMP) System Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

  17. Reactive wet stamping for patterning of polyelectrolyte multilayers.

    Science.gov (United States)

    Cho, Chungyeon; Valverde, Lauralee; Ozin, Geoffrey A; Zacharia, Nicole S

    2010-08-17

    Patterning of soft films, especially their bulk and not only their surface properties, presents a challenge. Several lithographic techniques do exist, but many of them are complex or limited in their ability to change properties. A few methods of patterning polyelectrolyte multilayers (PEM) have been reported, including microcontact printing and selectively growing layers on patterned self-assembled monolayers, but these all come with certain limitations. We present here the use of a modified microcontact printing method, reactive wet stamping (r-WETs), using a hydrogel stamp soaked in aqueous solutions to create patterns in PEMs. With this technique we are able to locally cause swelling and porosity changes in the PEM films and use our method to qualitatively study the evolution of the porous film morphology. This technique has the potential to locally control chemical functionality, film thickness, and mechanical properties, leading to a new ability to control film architectures both at the film surface and within the bulk of the film.

  18. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    OpenAIRE

    Pasquale Russo Spena

    2017-01-01

    This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

  19. Monitoring enzymatic degradation of pericellular matrices through SERS stamping

    Science.gov (United States)

    Yan, Bo; Hong, Yan; Chen, Tianhong; Reinhard, Björn M.

    2012-06-01

    We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix.We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix. Electronic supplementary information

  20. Individual competences acquired during the undergraduate years of students of a Business Administration program

    Directory of Open Access Journals (Sweden)

    Arilda Schmidt Godoy

    2009-01-01

    Full Text Available The aim of this study is to identify and analyze the opinions of students about the competences acquired in programs of Business Administration at a private university in São Paulo. A case study was carried out using a questionnaire – with closed and opened questions – to collect data and semi-structured interviews. The sample includes 441 students enrolled in the last semester. The factorial analysis allowed the identification of four factors corresponding to the following groups of competences: social, problem-solving, technical-professional, and communication ones. The frequency of the answers indicate that the competences which have highly agreement value concentrate on factor 1 (social competence and factor 2 (problem-solving competence. The qualitative data analysis allowed a better comprehension of the aspects involved in the identified competences. By summarizing the found results it is possible to conclude that, besides the development of an entrepreneur attitude, the program fundamentally provided the development of the social competence.

  1. U.S. Food and Drug Administration's dioxin monitoring program

    Energy Technology Data Exchange (ETDEWEB)

    South, P.; S. Kathleen Egan; Troxell, T.; P. Michael Bolger [U.S. Food and Drug Administration, Center for Food Safety and Applied Nutrition, College Park (United States)

    2004-09-15

    Dioxin-like compounds (DLCs) are a group of environmental contaminants whose primary route of human exposure occurs via the consumption of fatty foods of animal origin. Recent safety risk assessments conducted by national and international organizations broadly agree that risk management actions should be developed to decrease DLC exposure. Since the mid-1990s, the U.S. Food and Drug Administration (FDA) has tested specific foods with the goal of describing and reducing DLC exposure. In 2001, FDA developed a strategy for DLCs (http://vm.cfsan.fda.gov/{proportional_to}lrd/dioxstra.html) and substantially expanded its dioxin monitoring program to obtain more comprehensive data on background levels of DLCs in specific food and feed samples as well as to identify and reduce pathways of DLC contamination. FDA's dioxin monitoring program analyzes food collected under its Total Diet Study (TDS) and food and feed from targeted sampling. The TDS is FDA's ongoing market basket survey of approximately 280 core foods in the U.S. food supply. FDA targeted sampling collects and analyzes foods suspected of having both higher DLC levels and more variability in those levels than other foods. The contribution of dietary DLCs to overall exposure and the possible introduction of DLCs in animalbased food via the use of particular feed components was recently identified by the National Academy of Sciences Committee on the Implications of Dioxin in the Food Supply and confirmed FDA's approach articulated in its dioxin strategy.

  2. Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone

    Energy Technology Data Exchange (ETDEWEB)

    Cannell, Gary L. [Fluor Enterprises, Inc.; Huth, Ralph J. [CH2MHill Plateau Remediation Company; Hallum, Randall T. [Fluor Government Group

    2013-08-26

    In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work in a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.

  3. Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

    Science.gov (United States)

    Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

    2015-05-29

    Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

  4. Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

    International Nuclear Information System (INIS)

    Li, Xiaodong; Chang, Ying; Wang, Cunyu; Hu, Ping; Dong, Han

    2017-01-01

    The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M s temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

  5. FDA (Food and Drug Administration) Compliance Program Guidance Manual (FY 88). Section 4. Medical and radiological devices

    International Nuclear Information System (INIS)

    1988-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

  6. FDA (Food and Drug Administration) Compliance Program Guidance Manual (FY 85). Section 4. Medical and radiological devices

    International Nuclear Information System (INIS)

    1985-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

  7. Development of a Linked Perinatal Data Resource From State Administrative and Community-Based Program Data

    Science.gov (United States)

    Goyal, Neera K.; Ammerman, Robert T.; Miller, Megan M.; Jones, David E.; Short, Jodie A.; Van Ginkel, Judith B.

    2014-01-01

    To demonstrate a generalizable approach for developing maternal-child health data resources using state administrative records and community-based program data. We used a probabilistic and deterministic linking strategy to join vital records, hospital discharge records, and home visiting data for a population-based cohort of at-risk, first time mothers enrolled in a regional home visiting program in Southwestern Ohio and Northern Kentucky from 2007 to 2010. Because data sources shared no universal identifier, common identifying elements were selected and evaluated for discriminating power. Vital records then served as a hub to which other records were linked. Variables were recoded into clinically significant categories and a cross-set of composite analytic variables was constructed. Finally, individual-level data were linked to corresponding area-level measures by census tract using the American Communities Survey. The final data set represented 2,330 maternal-infant pairs with both home visiting and vital records data. Of these, 56 pairs (2.4 %) did not link to either maternal or infant hospital discharge records. In a 10 % validation subset (n = 233), 100 % of the reviewed matches between home visiting data and vital records were true matches. Combining multiple data sources provided more comprehensive details of perinatal health service utilization and demographic, clinical, psychosocial, and behavioral characteristics than available from a single data source. Our approach offers a template for leveraging disparate sources of data to support a platform of research that evaluates the timeliness and reach of home visiting as well as its association with key maternal-child health outcomes. PMID:23420307

  8. Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

    Science.gov (United States)

    Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

    2018-01-01

    The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

  9. Time series analysis of tool wear in sheet metal stamping using acoustic emission

    Science.gov (United States)

    Vignesh Shanbhag, V.; Pereira, P. Michael; Rolfe, F. Bernard; Arunachalam, N.

    2017-09-01

    Galling is an adhesive wear mode that often affects the lifespan of stamping tools. Since stamping tools represent significant economic cost, even a slight improvement in maintenance cost is of high importance for the stamping industry. In other manufacturing industries, online tool condition monitoring has been used to prevent tool wear-related failure. However, monitoring the acoustic emission signal from a stamping process is a non-trivial task since the acoustic emission signal is non-stationary and non-transient. There have been numerous studies examining acoustic emissions in sheet metal stamping. However, very few have focused in detail on how the signals change as wear on the tool surface progresses prior to failure. In this study, time domain analysis was applied to the acoustic emission signals to extract features related to tool wear. To understand the wear progression, accelerated stamping tests were performed using a semi-industrial stamping setup which can perform clamping, piercing, stamping in a single cycle. The time domain features related to stamping were computed for the acoustic emissions signal of each part. The sidewalls of the stamped parts were scanned using an optical profilometer to obtain profiles of the worn part, and they were qualitatively correlated to that of the acoustic emissions signal. Based on the wear behaviour, the wear data can be divided into three stages: - In the first stage, no wear is observed, in the second stage, adhesive wear is likely to occur, and in the third stage severe abrasive plus adhesive wear is likely to occur. Scanning electron microscopy showed the formation of lumps on the stamping tool, which represents galling behavior. Correlation between the time domain features of the acoustic emissions signal and the wear progression identified in this study lays the basis for tool diagnostics in stamping industry.

  10. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    OpenAIRE

    Nosova Ekaterina; Erisov Yaroslav; Grechnikov Fedor

    2017-01-01

    Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strai...

  11. 49 CFR 238.119 - Rim-stamped straight-plate wheels.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rim-stamped straight-plate wheels. 238.119 Section... Requirements § 238.119 Rim-stamped straight-plate wheels. (a)(1) Except as provided in paragraph (a)(2) of this... than a private car, that is equipped with a rim-stamped straight-plate wheel if a brake shoe acts on...

  12. The AI Program at the National Aeronautics and Space Administration: Lessons Learned During the First Seven Years

    OpenAIRE

    Montemerlo, Melvin D.

    1992-01-01

    This article is a slightly modified version of an invited address that was given at the Eighth IEEE Conference on Artificial Intelligence for Applications in Monterey, California, on 2 March 1992. It describes the lessons learned in developing and implementing the Artificial Intelligence Research and Development Program at the National Aeronautics and Space Administration (NASA). In so doing, the article provides a historical perspective of the program in terms of the stages it went through a...

  13. Relationships between Western Area Power Administration`s power marketing program and hydropower operations at Salt Lake City area integrated projects

    Energy Technology Data Exchange (ETDEWEB)

    Veselka, T.D.; Folga, S.; Poch, L.A. [and others

    1995-03-01

    This technical memorandum provides background information on the Western Area Power Administration (Western) and the physical characteristics of the Salt Lake City Area Integrated Projects (SLCA/IP) hydropower plants, which include the Colorado River Storage Project, the Rio Grande Project, and the Collbran Project. In addition, the history, electrical capacity, storage capacity, and flow restrictions at each dam are presented. An overview of Western`s current programs and services, including a review of statutory authorities, agency discretion, and obligations, is also provided. The variability of SLCA/IP hourly generation under various alternative marketing strategies and purchasing programs is discussed. The effects of Western`s services, such as area load control, outage assistance, and transmission, on SLCA/IP power plant operations are analyzed.

  14. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    OpenAIRE

    Ji Kang; Liu Xiaochuan; El Fakir Omer; Liu Jun; Zhang Qunli; Wang Liliang

    2016-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values betwe...

  15. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    OpenAIRE

    Liu Xiaochuan; Ji Kang; Fakir Omer El; Liu Jun; Zhang Qunli; Wang Liliang

    2015-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a h...

  16. Minerals on postage stamps: A mix of art, history, economics and geography

    Science.gov (United States)

    Glover, Paul

    2010-05-01

    Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

  17. Simulation Study on Hot Stamping Forming of the Drive Axle Housing of Heavy Truck

    Science.gov (United States)

    Dai, Yongqian; Ji, Jianyi; Luo, Lingjiang

    2018-01-01

    Aiming at the national energy-saving and emission reduction requirements, lightweight of the heavy truck is imminent. Several parameters related to hot stamping forming process of heavy truck drive axle housing are studied in this paper. The results show that the existing two-step stamping with air cooling molding process, can be improved into one-step hot stamping process. The initial temperature of the blank, stamping speed and other parameters related to the forming process were optimized. The results provides useful reference for improving the existing forming process of the drive axle housing, and it is also helpful for realizing the lightweight design of drive axle housing.

  18. Social and Student Engagement and Support: The Sloan-C Quality Scorecard for the Administration of Online Programs

    Science.gov (United States)

    Moore, Janet C.; Shelton, Kaye

    2013-01-01

    As combinations of place-based, blended and fully online education proliferate, so do options for support and services. Aligning with regional accreditation criteria, the Sloan-C Quality Scorecard for the Administration of Online Programs is a useful way for institutions to measure and compare the quality of social and student engagement and…

  19. Ensuring Program Uniformity at the Hearing and Appeals Council Levels of the Administrative Review Process. Final rule.

    Science.gov (United States)

    2016-12-16

    We are revising our rules so that more of our procedures at the hearing and Appeals Council levels of our administrative review process are consistent nationwide. We anticipate that these nationally consistent procedures will enable us to administer our disability programs more efficiently and better serve the public.

  20. Effects of Work Environment on Transfer of Training: Empirical Evidence from Master of Business Administration Programs in Vietnam

    Science.gov (United States)

    Pham, Nga T. P.; Segers, Mien S. R.; Gijselaers, Wim H.

    2013-01-01

    Practical application of newly gained knowledge and skills, also referred to as transfer of training, is an issue of great concern in training issues generally and in Master of Business Administration (MBA) programs particularly. This empirical study examined the influence of the trainees' work environment on their transfer of training, taking…

  1. The Virtual Classroom and Catholic School Leadership Preparation: The LMU Certificate in Catholic School Administration (CCSA) Program

    Science.gov (United States)

    Sabatino, Anthony

    2016-01-01

    Catholic Extension and Loyola Marymount University (LMU) have engaged in a partnership to offer a graduate level, virtual classroom-based Certificate in Catholic School Administration (CCSA) program for novice and prospective leaders in Catholic schools in mission dioceses throughout the United States. This synchronous online Catholic School…

  2. From Theory to Practice: Utilizing Integrative Seminars as Bookends to the Master of Public Administration Program of Study

    Science.gov (United States)

    Stout, Margaret; Holmes, Maja Husar

    2013-01-01

    Integrative seminar style courses are most often used as an application-oriented capstone in place of a thesis or comprehensive exam requirement in Master of Public Administration (MPA) degree programs. This article describes and discusses the benefits of a unique approach of one National Association of Schools of Public Affairs and Administration…

  3. 75 FR 3197 - Notice of a Public Meeting on Administration of the Business and Industry Guaranteed Loan Program

    Science.gov (United States)

    2010-01-20

    ... DEPARTMENT OF AGRICULTURE Rural Business-Cooperative Service Notice of a Public Meeting on Administration of the Business and Industry Guaranteed Loan Program AGENCY: Rural Business-Cooperative Service, USDA. ACTION: Notice of public meeting. SUMMARY: The Rural Business-Cooperative Service (RBS), an...

  4. Government Career Interests, Perceptions of Fit, and Degree Orientations: Exploring Their Relationship in Public Administration Graduate Programs

    Science.gov (United States)

    Bright, Leonard

    2018-01-01

    Scholars have long suggested that the degree orientations of public administration programs were related to the attitudes and behaviors of students, even though empirical research had failed to confirm this relationship. The purpose of this study was to re-examine this question from the standpoint of perceptions of fit. Using a sample of…

  5. An interactive and flexible approach to stamping design and optimization

    International Nuclear Information System (INIS)

    Roy, Subir; Kunju, Ravi; Kirby, David

    2004-01-01

    This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

  6. Development of Program to Enhance Team Building Leadership Skills of Primary School Administrators

    Science.gov (United States)

    Sairam, Boonchauy; Sirisuthi, Chaiyuth; Wisetrinthong, Kanjana

    2017-01-01

    Team building leadership skills are important to understandings of how the primary school administrators might work towards creating more effective teamwork in the school. This research aimed 1) to study the components of team building leadership skills needed for primary school administrators, 2) to examine the current states and desirable…

  7. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    Directory of Open Access Journals (Sweden)

    Pasquale Russo Spena

    2017-10-01

    Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

  8. Core-satellite supraparticles to ballistically stamp nanostructures on surfaces.

    Science.gov (United States)

    Oppmann, Maximilian; Miller, Franziska; Thürauf, Sandra; Groppe, Philipp; Prieschl, Johannes; Stauch, Claudia; Mandel, Karl

    2018-03-27

    Nanostructured surfaces are of great importance in a very wide range of fields. They can be obtained by imprint or deposition techniques. However, these are usually sophisticated to perform. Generally, it is not easy to equip an object/product with a nanostructure post manufacturing. Yet, it would be very beneficial to achieve a modification of an arbitrary surface with a nanostructure of choice at a later stage by an approach that is simple to perform without the need of sophisticated equipment or excessive treatment by physico-chemical methods. Herein, such a process is reported which combines two "old-fashioned" techniques, namely sandblasting and rubber-stamping, and translates them to the "nano-world". By creating core-satellite supraparticles via spray-drying, a ballistic core-satellite stamp particle system is obtained which can be used to easily transfer a wide range of nanoparticles to a great variety of surfaces to equip these with a nanostructure and subsequently advanced properties. These include water-repellant, anti-fouling or anti-dust surfaces. Moreover, it is also demonstrated that the approach can be used to manufacture well-defined nano-imprinted surfaces. Such surfaces showed an improved spreading behavior for aliphatic alcohols, thus rendering such surfaces for instance very susceptible for disinfectants. All in all, the simple technique described herein has a great potential for creating nanostructured surfaces on nearly any surface.

  9. Stamping, Clapping and Chanting: An Ancient Learning Pathway?

    Directory of Open Access Journals (Sweden)

    Marion M. Long

    2006-04-01

    Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

  10. Size Effect Studies on Tensile Tests for Hot Stamping Steel

    Science.gov (United States)

    Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

    2018-02-01

    Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

  11. Two Important Stamp Motifs in Roman Britain and Thereafter

    Directory of Open Access Journals (Sweden)

    Diana C. Briscoe

    2016-03-01

    Full Text Available Stamped pottery has had a long and varied history in Britain. There have been periods when it flourished and periods when it almost totally disappeared. This article considers two variations of the rosette motif (A 5 and their fortunes from the late Iron Age to the Early Saxon period. Having been of little importance in the Iron Age and early Roman periods, they became some of the most widely used and distributed motifs in the fourth century. By the fifth century, they were still important, but formed a much smaller proportion of the total motifs than in the fourth century. In the vast majority of cases, there is no correlation between the find spots of fourth and fifth century examples. However, I have identified nine locations where one or other of the two motifs have been found on a late Roman site, which lies within a mile of another site with the same motif, but from the post-Roman period. In these rare conjunctions, I believe that ongoing usage of the motif can be demonstrated from Roman to post-Roman times. It is also clear that pot stamp evidence can be vital in identifying these highly unusual locations and pointing other researchers to sites worthy of special attention.

  12. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program 1988, volume 1

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

    1989-01-01

    The 1988 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and in 1964 nationally, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers.

  13. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1989, volume 2

    Science.gov (United States)

    Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

    1989-01-01

    The 1989 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers.

  14. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1989, volume 1

    Science.gov (United States)

    Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

    1989-01-01

    The 1989 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers.

  15. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program 1988, volume 2

    Science.gov (United States)

    Bannerot, Richard B.; Goldstein, Stanley H.

    1989-01-01

    The 1988 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JCS. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and in 1964 nationally, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers.

  16. Future directions for nursing administration.

    Science.gov (United States)

    Poulin, M A

    1984-03-01

    As the age of centralization wanes, nurse executives must look ahead. The author, noting a terrain obscured by the increasing complexity of nursing practice, points out the advantages of decentralizing decision making and of providing a distinctive nursing stamp to research and administration theory. Nurse executives, trained in management from early in their professional formation, can provide enlightened direction and flexible support for tomorrow's opportunities.

  17. Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

    CERN Multimedia

    Patrice Loiez

    2004-01-01

    'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

  18. Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

    Science.gov (United States)

    National Women's History Project, Windsor, CA.

    This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

  19. Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

    Science.gov (United States)

    Gundersen, Craig; Kreider, Brent

    2008-01-01

    Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

  20. 27 CFR 70.332 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

  1. TAX ADMINISTRATION: Impact of Compliance and Collection Program Declines on Taxpayers

    National Research Council Canada - National Science Library

    2002-01-01

    ...) compliance and collection programs. Many view these programs-such as audits to determine whether taxpayers have accurately reported the amount of taxes that they owe and collection follow-up with taxpayers who have not...

  2. Resolving Issues in Innovative Graduate Degree Programs: The Metropolitan State University Doctor of Business Administration Experience

    Science.gov (United States)

    Delmont, Tim

    2011-01-01

    Applied Master's Degree and doctoral programs have been criticized widely for their lack of relevance, rigor and quality. New graduate degree programs have responded to these criticisms by implementing innovative academic policies, program curriculum, and student services. A case study of the Metropolitan State University Doctor of Business…

  3. Tribal CCDF Guide to "Financial Management, Grants Administration, and Program Accountability"

    Science.gov (United States)

    Child Care Bureau, 2009

    2009-01-01

    Tribal managers and staff working with Federal grants must be fully knowledgeable of all applicable Federal requirements and skilled in applying these requirements to the daily operation of their programs, whether starting a new program or striving to maintain a quality program which meets the intent of the enacting legislation. It is the…

  4. Peer Programs: An In-Depth Look at Peer Helping: Planning, Implementation, and Administration.

    Science.gov (United States)

    Tindall, Judith A.

    The goal of this book is to provide a program designed to teach peer helping professionals a method and rationale for training peer helpers. Peer helping programs are a major delivery system of affective education or deliberate psychological education. Peer helping programs can provide prevention, intervention, and support systems for people.…

  5. 76 FR 40741 - Federal Housing Administration (FHA) Mortgage Insurance Premiums for Multifamily Housing Programs...

    Science.gov (United States)

    2011-07-11

    ... 2011, this notice announces that the risk categories ] incurring positive credit subsidy obligations... positive credit subsidy risk categories: (1) Section 221(d)(3) new construction/substantial rehabilitation... URBAN DEVELOPMENT Federal Housing Administration (FHA) Mortgage Insurance Premiums for Multifamily...

  6. SAT administrator

    International Nuclear Information System (INIS)

    Havas, A.

    1998-01-01

    SAT Administrator is the Information System for Nuclear Power Plant Personnel Training Program Design. It supports the design of training programs in the following phases: job analysis; task analysis; competency analysis; task competency association; definition of learning objectives to competencies; training program design; definition of test items. The general structure of the database and management software supports application of the SAT Administrator in any nuclear power installation

  7. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Ji Kang

    2016-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

  8. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Liu Xiaochuan

    2015-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

  9. Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

    Science.gov (United States)

    Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

    2016-10-01

    Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

  10. U.S. Army-Baylor University Health Care Administration Program: evidenced-based outcomes in the military health system.

    Science.gov (United States)

    Mangelsdorff, A David; Rogers, Jody; Finstuen, Kenn; Pryor, Rene

    2004-01-01

    The purpose of this research is to assess the impact of an educational program on the Military Health System on some of the evidence-based educational outcomes for the Individual (student) and the Society (all Army Medical Treatment Facilities). The U.S. Army-Baylor University HCA program provides a unique opportunity to assess the impact of an educational program on the Military Health System (MHS). Since the majority of the graduate students are military officers who serve in military medical treatment facilities (MTFs), tracking their career progression allows assessing the value added of the U.S. Army-Baylor University HCA experience from 1951 to 2001 (n = 2234). The context of Society outcomes includes all the Army MTFs where U.S. Army-Baylor University HCA graduates execute their leadership skills. During the time from 1994 to 2001, all of the Army MTFs in the MHS (n = 38) were examined by the Joint Commission on Accreditation of Healthcare Organizations (JCAHO). In a similar but shorter time frame (1997-2001), DoD patient satisfaction assessments were conducted. The Individual outcomes (career advancement, increase in status, higher professional association membership) demonstrate that the selection criteria used for program admission appear to be successful. The Society outcomes showed higher JCAHO scores and satisfied consumers in Army facilities with Baylor graduates as the Deputy Commander for Administration (DCA). Continued internal program assessments (curriculum reviews) and external reviews (Accrediting Commission on Education for Health Services Administration accreditations of 5 years in 1987, 8 years in 1993 and 7 years in 2001, and 7 ACHE student chapter awards) attest to the strengths of the U.S. Army-Baylor University HCA program. Educating the MHS shareholders (patients, beneficiaries, professional and support staff, senior leaders) and leveraging technology to. share best practices for all administrators (including non-Baylor graduates) will

  11. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1992, volume 1

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

    1992-01-01

    The 1992 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, Washington, DC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers. This document is a compilation of the final reports 1 through 12.

  12. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1992, volume 2

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

    1992-01-01

    The 1992 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters Washington, DC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers. This document contains reports 13 through 24.

  13. Implementing evidence-based patient self-management programs in the Veterans Health Administration: perspectives on delivery system design considerations.

    Science.gov (United States)

    Damush, T M; Jackson, G L; Powers, B J; Bosworth, H B; Cheng, E; Anderson, J; Guihan, M; LaVela, S; Rajan, S; Plue, L

    2010-01-01

    While many patient self-management (PSM) programs have been developed and evaluated for effectiveness, less effort has been devoted to translating and systematically delivering PSM in primary and specialty care. Therefore, the purpose of this paper is to review delivery system design considerations for implementing self-management programs in practice. As lessons are learned about implementing PSM programs in Veterans Health Administration (VHA), resource allocation by healthcare organization for formatting PSM programs, providing patient access, facilitating PSM, and incorporating support tools to foster PSM among its consumers can be refined and tailored. Redesigning the system to deliver and support PSM will be important as implementation researchers translate evidence based PSM practices into routine care and evaluate its impact on the health-related quality of life of veterans living with chronic disease.

  14. Automatic machine for the stamp charging of cakes of coal for coking. Machine automatique pour le pilonnage des pains de charbon a cokefier

    Energy Technology Data Exchange (ETDEWEB)

    Baro, R.; Crauser, L.; Mely, A.

    1988-06-29

    This machine, which consists of several basic stamp chargers that are interlinked and each of which has several stamps, has a total length that is one run less than the length of the stamp charging box, all the stamps being a constant distance apart which is at most equal to the said run so that the alternating movement of the machine along the rung ensures that the coal is stamp charged along the whole length of the stamp charging box, the stamps being, in addition, braked and stopped when necessary by an idler roller device that acts automatically in the stamp's ascending direction.

  15. Implementing the MOVE! weight-management program in the Veterans Health Administration, 2007-2010: a qualitative study.

    Science.gov (United States)

    Weiner, Bryan J; Haynes-Maslow, Lindsey; Kahwati, Leila C; Kinsinger, Linda S; Campbell, Marci K

    2012-01-01

    One-third of US veterans receiving care at Veterans Health Administration (VHA) medical facilities are obese and, therefore, at higher risk for developing multiple chronic diseases. To address this problem, the VHA designed and nationally disseminated an evidence-based weight-management program (MOVE!). The objective of this study was to examine the organizational factors that aided or inhibited the implementation of MOVE! in 10 VHA medical facilities. Using a multiple, holistic case study design, we conducted 68 interviews with medical center program coordinators, physicians formally appointed as program champions, managers directly responsible for overseeing the program, clinicians from the program's multidisciplinary team, and primary care physicians identified by program coordinators as local opinion leaders. Qualitative data analysis involved coding, memorandum writing, and construction of data displays. Organizational readiness for change and having an innovation champion were most consistently the 2 factors associated with MOVE! implementation. Other organizational factors, such as management support and resource availability, were barriers to implementation or exerted mixed effects on implementation. Barriers did not prevent facilities from implementing MOVE! However, they were obstacles that had to be overcome, worked around, or accepted as limits on the program's scope or scale. Policy-directed implementation of clinical weight-management programs in health care facilities is challenging, especially when no new resources are available. Instituting powerful, mutually reinforcing organizational policies and practices may be necessary for consistent, high-quality implementation.

  16. Urban energy management: a course on the administration of public energy programs. An instructor's guide

    Energy Technology Data Exchange (ETDEWEB)

    Mandelbaum, Dr., Len; Olsen, Dr., Marvin; Hyman, Dr., Barry; Sheridan, Mimi; Dahlberg, Judy; O' Brien, Jeremy

    1980-12-01

    The course provides local government administrators, staff, and students with the background knowledge to deal with a broad range of energy management concerns and is not to train technical energy conservation specialists. Section II contains the Instructor's Guide and Section III provides the Student Outlines and Handouts on the following subjects: The Energy Problem; National Energy Politics and Programs; State and Local Energy Programs; Techniques of Energy Planning; Techniques of Energy Conservation; Techniques of Renewable Energy Production; Strategies for Voluntary Energy Management; Strategies for Finan. Energy Management; and Strategies for Mandatory Energy Management. (MCW)

  17. Titanium nitride stamps replicating nanoporous anodic alumina films

    International Nuclear Information System (INIS)

    Navas, D; Sanchez, O; Asenjo, A; Jaafar, M; Baldonedo, J L; Vazquez, M; Hernandez-Velez, M

    2007-01-01

    Fabrication of nanostructured TiN films by magnetron sputtering using nanoporous anodic alumina films (NAAF) as substrates is reported. These hard nanostructured films could be used for pre-patterning aluminium foils and to obtain nanoporous films replicating the starting NAAF over a wide range of pore diameters and spacings. Pre-patterned Al foils are obtained by compression with pressures lower than those previously reported, then a new NAAF can be fabricated by means of only one anodization process. As an example, one of the TiN stamps was used for pre-patterning an Al foil at a pressure of 200 kg cm -2 and then it was anodized in oxalic acid solution obtaining the corresponding replica of the starting NAAF

  18. A novel time stamping technique for distributed data acquisition systems

    Science.gov (United States)

    Subramaniam, E. T.

    2012-12-01

    In this paper, we discuss the design and implementation of a synchronizing technique for data acquisition systems, which can effectively use the normal, standard local area network cables to provide a time stamp, with a range up to 32 days, resolution of 10 ns, and synchronization within ± 5 ns. This system may be used to synchronize data being collected by independent heterogeneous data acquisition modules, that acquire events independently. Such distributed systems are generally designed with a tree-like structure or independent self-triggered acquisition boxes. These leaf edges are connected through branches to the root node, via non-bus based inter-connecting links. The present system has been tested with a set of self-triggered digital signal processing based data acquisition engines, having a 100 MHz analog to digital converter front end.

  19. Evaluating antibiotic stewardship programs in patients with bacteremia using administrative data

    DEFF Research Database (Denmark)

    Boel, J; Søgaard, M; Andreasen, V

    2015-01-01

    When introducing new antibiotic guidelines for empirical treatment of bacteremia, it is imperative to evaluate the performance of the new guideline. We examined the utility of administrative data to evaluate the effect of new antibiotic guidelines and the prognostic impact of appropriate empirical...... treatment. We categorized 2,008 adult patients diagnosed with bacteremia between 2010 and 2012 according to whether they received cephalosporins or fluoroquinolones (old regimen) or not (new regimen). We used administrative data to extract individual level data on mortality, readmission, and appropriateness.......87–1.25) for the new versus the old regimen. This study demonstrates that administrative data can be useful for evaluating the effect and quality of new bacteremia treatment guidelines...

  20. Program Management at the National Nuclear Security Administration Office of Defense Nuclear Security: A Review of Program Management Documents and Underlying Processes

    International Nuclear Information System (INIS)

    Madden, Michael S.

    2010-01-01

    The scope of this paper is to review the National Nuclear Security Administration Office of Defense Nuclear Security (DNS) program management documents and to examine the underlying processes. The purpose is to identify recommendations for improvement and to influence the rewrite of the DNS Program Management Plan (PMP) and the documentation supporting it. As a part of this process, over 40 documents required by DNS or its stakeholders were reviewed. In addition, approximately 12 other documents produced outside of DNS and its stakeholders were reviewed in an effort to identify best practices. The complete list of documents reviewed is provided as an attachment to this paper.

  1. Federal Highway Administration Research and Technology National Household Travel Survey Program

    Science.gov (United States)

    2017-08-01

    This evaluation of the National Household Travel Survey (NHTS) Program addresses three key questions: 1) What is the breadth and depth of NHTS usage? 2) What impact does the NHTS Program have on policy, project, or regulatory decision making? 3) How ...

  2. Implementation of an Integrative Medicine Treatment Program at a Veterans Health Administration Residential Mental Health Facility.

    Science.gov (United States)

    Gaddy, Melinda A

    2017-10-12

    A 4-week interdisciplinary integrative medicine program was recently added to the core treatment offerings for veterans participating in the Mental Health Residential Rehabilitation Program at the Dwight D. Eisenhower Veterans Affairs Medical Center. The new integrative medicine program teaches veterans about using meditative practices, nutrition, creative expression, tai chi, hatha yoga, sensory and breathing techniques, and lifestyle changes to enhance well-being. The groups are run by professionals from a variety of disciplines including recreation therapy, art therapy, occupational therapy, psychology, and nutrition. For the first 42 veterans to complete the program, the Short Form 12-item Health Survey was administered before and after participation in the integrative medicine program to assess the potential effectiveness of the program in enhancing physical and psychological well-being. In addition, a brief semistructured interview was used to assess veteran opinions about the program. Results suggest that the program was well received and that both physical and mental health scores improved from before to after treatment in this sample of veterans with complex behavioral health concerns. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  3. Conversations on Collaboration: Graduate Students as Writing Program Administrators in the Writing Center

    Science.gov (United States)

    Hewerdine, Jennifer M.

    2017-01-01

    This research sought to ascertain through a phenomenological approach whether and how collaboration occurs in writing center administration. The reflections and perceptions of former writing center gWPAs provided insight into a variety of institutional contexts and experiences present in writing center collaboration. The participants perceived…

  4. 75 FR 57233 - 340B Drug Pricing Program Administrative Dispute Resolution Process

    Science.gov (United States)

    2010-09-20

    ... of proof; evidence; and post-hearing briefs. (5) Decision-making Official or Body HRSA expects to... establish a decision making official or decision- making body within the Department of Health and Human... administrative official or body responsible for adjudicating such claim; (iv) Require that a manufacturer conduct...

  5. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Science.gov (United States)

    2010-01-01

    ..., from the International Trade Commission, its views as to the probable impact on the economy of the... negotiation or administration of international agreements which primarily concern trade and which are... Executive Director of the Council on International Economic Policy. Each member of the Committee may...

  6. U.S. Public Administration Programs: Increasing Academic Achievement by Identifying and Utilizing Student Learning Styles

    Science.gov (United States)

    Naylor, Lorenda A; Wooldridge, Blue; Lyles, Alan

    2014-01-01

    Global economic shifts are forcing universities to become more competitive and operationally efficient. As a result, universities emphasize access, affordability, and achievement. More specifically, U.S. universities have responded by emphasizing course assessment, retention rates, and graduation rates. Both university administrators and faculty…

  7. 75 FR 34625 - Administrative Remedy Program: Exception to Initial Filing Procedures

    Science.gov (United States)

    2010-06-18

    ... initial filing at the institution where the inmate is located. For sensitive issues, Discipline Hearing... adds a fifth exception to the initial filing procedures: Formal administrative remedy requests... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF JUSTICE...

  8. Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

    Science.gov (United States)

    Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

    2017-12-01

    LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

  9. A unique patterned diamond stamp for a periodically hierarchical nanoarray structure

    Science.gov (United States)

    Wang, Yi; Shen, Yanting; Xu, Weiqing; Xu, Shuping; Li, Hongdong

    2016-10-01

    A diamond stamp with a hierarchical pattern was designed for the direct preparation of a periodic nanoarray structure, which was prepared by the reactive ion etching technique with a hierarchical ultrathin alumina membrane (HUTAM) as a mask. The optimal etching conditions for fabricating the diamond stamp were discussed in order to realize a vertical nanopore structure, avoiding structural damage from lateral etching. By using this diamond stamp, a polymer film with the desired hierarchical nanorod array structure can be obtained easily via the simple stamping process, which greatly simplifies the processing procedure. More importantly, the stamp is reusable because of its super-hardness, which ensures the reproducibility of the nanorod array pattern. Another merit is that the smooth surface of the etched diamond can avoid the use of a release agent. Our results prove that this hard stamp can be used for quick preparation of an elaborate periodic nanoarray structure. This study is significant in that it solves the problems of high cost and easy damage of stamps in nanoimprint lithography, and it might inspire more sophisticated applications of such an ordered structure in nanoplasmonics, biochemical sensing and nanophotonic devices.

  10. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1987, volume 2

    Science.gov (United States)

    Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

    1987-01-01

    The 1987 Johnson Space Center (JCS) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of ASEE. The basic objectives of the program are: to further the professional knowledge of qualified engineering and science faculty members; to stimulate an exchange of ideas between participants and NASA; to enrich and refresh the research and teaching activities of participants' institutions; and to contribute to the research objective of the NASA Centers. This document is a compilation of the final reports on the research projects done by the faculty fellows during the summer of 1987.

  11. Higher Education Military and Veteran Student Program Success: A Qualitative Study of Program Administration Best Practice Application

    Science.gov (United States)

    Murillo, Rose L.

    2017-01-01

    Purpose: The purpose of this study was to determine how Southern California community colleges have implemented best practices based on the 8 Keys to Veterans' Success as identified by the U.S. Departments of Education, Defense, and Veterans Affairs to effectively support and retain military and veteran students in higher education programs. The…

  12. Tax Administration: IRS's Innocent Spouse Program Performance Improved; Balanced Performance Measures Needed

    National Research Council Canada - National Science Library

    2002-01-01

    .... Under the Internal Revenue Services (IRS) Innocent Spouse Program, IRS can relieve taxpayers of tax debts on the basis of equity considerations, such as not knowing that their spouse failed to pay taxes due...

  13. Tax Administration: IRS Should Evaluate the Changes to Its Offer in Compromise Program

    National Research Council Canada - National Science Library

    2002-01-01

    ...) Offer in Compromise (OIC) Program. An offer in compromise is an agreement between a taxpayer and the IRS to settle or compromise the taxpayer's tax liability for less than the full amount owed...

  14. Celebrating a history of excellence : the Federal Aviation Administration and Space Education Outreach Program.

    Science.gov (United States)

    2011-01-01

    Building on 75 years of experience, the FAAs : aviation and space education outreach : program is earning an A+ for encouraging elementary, : secondary, and even college students to study math, : science, technology, engineering, and a host of : o...

  15. Summer High School Apprenticeship Research Program (SHARP) of the National Aeronautics and Space Administration

    Science.gov (United States)

    1984-01-01

    A total of 125 talented high school students had the opportunity to gain first hand experience about science and engineering careers by working directly with a NASA scientist or engineer during the summer. This marked the fifth year of operation for NASA's Summer High School Apprenticehsip Research Program (SHARP). Ferguson Bryan served as the SHARP contractor and worked closely with NASA staff at Headquarters and the eight participating sites to plan, implement, and evaluate the Program. The main objectives were to strengthen SHARP and expand the number of students in the Program. These eight sites participated in the Program: Ames Research Center North, Ames' Dryden Flight Research Facility, Goddard Space Flight Center, Goddard's Wallops Flight Facility, Kennedy Space Center, Langley Research Center, Lewis Research Center, and Marshall Space Flight Center.

  16. Tax Administration: IRS Should Evaluate the Changes to Its Offer in Compromise Program

    National Research Council Canada - National Science Library

    2002-01-01

    ...), the demand for offers has increased significantly. Even though IRS added staff to the program, the inventory of unresolved offers and the processing times have grown. IRS now takes about 10 months, on average, to make an offer determination.

  17. Early experiences of computer-aided assessment and administration when teaching computer programming

    OpenAIRE

    Abdullah Mohd Zin; Neil Gutteridge; Eric Foxley; Edmund Burke; Steve Benford

    1993-01-01

    This paper describes early experiences with the Ceilidh system currently being piloted at over 30 institutions of higher education. Ceilidh is a course-management system for teaching computer programming whose core is an auto-assessment facility. This facility automatically marks students programs from a range of perspectives, and may be used in an iterative manner, enabling students to work towards a target level of attainment. Ceilidh also includes extensive courseadministration and progres...

  18. Using problem-based learning to redesign nursing administration masters programs.

    Science.gov (United States)

    Baker, C M

    2000-01-01

    Problem-based learning (PBL) is offered as an appropriate pedagogy to prepare nurse managers for the uncertainties of future administrative practice. It is a student-centered, experiential learning strategy aimed at developing clinical reasoning, structuring knowledge in real-life contexts, motivating learning, and developing self-learning skills. Health professions and business schools report positive feedback from their stakeholders after adopting this new learning paradigm.

  19. Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

    Directory of Open Access Journals (Sweden)

    Juergen Brugger

    2013-10-01

    Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

  20. Conical tungsten stamps for the replication of pore arrays in anodic aluminium oxide films

    Science.gov (United States)

    LeClere, D. J.; Thompson, G. E.; Derby, B.

    2009-06-01

    A tungsten master stamp has been generated by applying a novel procedure that includes two-step anodizing, followed by sequential anodizing and pore widening to develop nominally funnelled pores. These conical-shaped pores were filled with tungsten by sputter coating to manufacture a master stamp. Under a pressure of 65 MPa, the master stamp successfully embossed the surface of annealed and electropolished aluminium. The embossed surface was then used to control the position of pores created by anodizing under the conditions used to produce the original pore array.

  1. Factors influencing the success of rural cataract surgery programs in China: the study of hospital administration and relative productivity (SHARP).

    Science.gov (United States)

    Liu, Tianyu; Ong, Ee Lin; Yan, Xixi; Guo, Xinxing; He, Mingguang; Friedman, David; Congdon, Nathan

    2013-01-09

    To explore factors potentially influencing the success or failure of rural Chinese hospitals in increasing cataract surgical output and quality. Focus groups (FGs, n = 10) were conducted with hospital administrators, doctors, and nurses at 28 county hospitals in Guangdong Province. Discussions explored respondents' views on increasing surgical volume and quality and improving patient satisfaction. Respondents numerically ranked possible strategies to increase surgical volume and quality and patient satisfaction. FG transcripts were independently coded by two reviewers utilizing the constant comparative method following the grounded theory approach, and numerical responses were scored and ranked. Ten FGs and 77 ranking questionnaires were completed by 33 administrators, 23 doctors, and 21 nurses. Kappa values for the two coders were greater than 0.7 for all three groups. All groups identified a critical need for enhanced management training for hospital directors. Doctors and nurses suggested reducing surgical fees to enhance uptake, although administrators were resistant to this. Although doctors saw the need to improve equipment, administrators felt current material conditions were adequate. Respondents agreed that patient satisfaction was generally high, and did not view increasing patient satisfaction as a priority. Our findings highlight agreements and disagreements among the three stakeholder groups about improving surgical output and quality, which can inform strategies to improve cataract programs in rural China. Respondents' beliefs about high patient satisfaction are not in accord with other studies in the area, highlighting a potential area for intervention.

  2. Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

    Science.gov (United States)

    Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

    2017-12-01

    Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

  3. Involvement in Community Extension Program of Business Administration Students in one Higher Education Institution in the Philippines

    Directory of Open Access Journals (Sweden)

    Jo-Anne May A. Rubio

    2016-02-01

    Full Text Available Conducting community service is about relationship on building communities. It is designed for personal and social development. The researchers conduct this investigation to assess the Community Extension program of the College of Business Administration (CBA in one Private Higher Education Institution in the Philippines. The descriptive method of research utilizing the normative survey technique was employed in the study. The results of the study revealed that majority of the respondents are first year level and from Bachelor of Science in Business Administration. It also shows that there are students who are not involve in any organization of the college. This study further shows that community extension program of the college was well implemented. Students were well involved in the said activities. The students can expect benefits that will help them grow to a more productive and efficient students and member of the community. Moreover, there are also some expected problems in joining this kind of activity like funds, location and the logistics. The extension programs may continue to move on and reach out for the sustainable development of the students and community.

  4. National Aeronautics and Space Administration Marshall Space Flight Center Space Transportation Directorate Risk Management Implementation Program

    Science.gov (United States)

    Duarte, Luis Alberto; Kross, Denny (Technical Monitor)

    2001-01-01

    The US civil aerospace program has been a great contributor to the creation and implementation of techniques and methods to identify, analyze, and confront risk. NASA has accomplished mission success in many instances, but also has had many failures. Anomalies have kept the Agency from achieving success on other occasions, as well. While NASA has mastered ways to prevent risks, and to quickly and effectively react and recover from anomalies or failures, it was not until few years ago that a comprehensive Risk Management process started being implemented in some of its programs and projects. A Continuous Risk Management (CRM) cycle process was developed and has been promoted and used successfully in programs and projects across the Agency.

  5. The 1985 National Aeronautics and Space Administration's Summer High School Apprenticeship Research Program (SHARP)

    Science.gov (United States)

    1985-01-01

    In 1985, a total of 126 talented high school students gained first hand knowledge about science and engineering careers by working directly with a NASA scientist or engineer during the summer. This marked the sixth year of operation for NASA's Summer High School Apprenticeship Research Program (SHARP). The major priority of maintaining the high standards and success of prior years was satisfied. The following eight sites participated in the Program: Ames Research Center, Ames' Dryden Flight Research Facility, Goddard Space Flight Center, Goddard's Wallop Flight Facility, Kennedy Space Center, Langley Research Center, Lewis Research Center, and Marshall Space Flight Center. Tresp Associates served as the SHARP contractor and worked closely with NASA staff at headquarters and the sites just mentioned to plan, implement, and evaluate the program.

  6. Academic and Administrative Issues for Implementation of Capstone Course in Civil Engineering programs: Case Study

    Directory of Open Access Journals (Sweden)

    María Fernanda Serrano-Guzmán

    2017-04-01

    Full Text Available A capstone course is a culminating academic experience designed to encourage teamwork among students by applying their five years of classroom knowledge to solve realistic engineering problems. This emerging capstone experience demands academic and administrative changes to guarantee a satisfactory result within the time spared for this purpose. The main objective of this research is to assess students’ perception regarding the capstone project as a culminating academic experience, and to use the analysis results to propose academic and administrative changes required to support and guarantee the successful achievement of this type of final degree project. To reach this goal, an assessment instrument was prepared and applied to 47 students enrolled in a capstone course. The instrument allowed collecting information regarding problem-based learning experience, teamwork experience, and self-perception concerning students’ own behaviors and attitude during teamworking. On this regard, 87.2% of students considered capstone as a suitable final degree experience; however, it is challenging because it is known that student’s participation during teamworking is uncommon and usually just two students are committed. In spite of this, 86.2% of students considered that teamwork was satisfactory and 95.2% of them recognized that their self-behavior and attitude during teamworking was good. Based on the results we recommend to strengthen teamwork strategies among students, and to instruct teachers about assessment strategies to evaluate individual and teamwork performance of students. It is expected that these findings can help improve the capstone curriculum related to courses and their administration. These findings are also supposed to serve as a previous experience to those universities committed to include capstone as a culminating degree experience.

  7. Economic Values for Evaluation of Federal Aviation Administration Investment and Regulatory Programs

    Science.gov (United States)

    1989-10-01

    185.60 Maintenance 645.83 Turboprop, 2-Engine, 20+ Seats ATR42 Crew 176.21 Fuel & Oil 100.70 Maintenance 114.81 C-6 rew 69.41 Fuel & Oil 58.49 Maintenance... ATR42 8 $6850 $7400 $7125 $57000 CV580 58 1000 750 875 50750 CV600/640 31 625 500 562.5 17437.5 IW-6 68 575 575 575 39100 L8W-7 38 3500 3250 3375...Administration, 1984. 84. Miller, T., S. Luchter and C. P. Brinkman, " Crash Costs and Safety Investment," unpublished paper to be presented at, Association for

  8. National Aeronautics and Space Administration (NASA)/American Society of Engineering Education (ASEE) Summer Faculty Fellowship Program - 2000

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Sickorez, Donn G. (Editor)

    2003-01-01

    The 2000 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and 1964 nationally, are to (1) further the professional knowledge of qualified engineering and science faculty, (2) stimulate an exchange of ideas between participants and NASA, (3) enrich and refresh the research and teaching activities of participants' institutions, and (4) contribute to the research objectives of the NASA Centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project commensurate with her/his interests and background, and worked in collabroation with a NASA/JSC colleague. This document is a compilation of the final reports on the research projects done by the faculty fellows during the summer of 2000.

  9. Safety and quality management and administration Fiscal Year 1995 site support program plan WBS 6.7.2.6

    International Nuclear Information System (INIS)

    Hagan, J.W.

    1994-09-01

    The mission of the Emergency, Safety, and Quality Services (ESQ) management and Program Integration is to provide leadership for the ESQ Department, coordinate business management activities of the ESQ department, and the programs it supports, as well as to plan organize, direct, and control other activities that require department-wide coordination. Primary activities include providing strategic and business planning and reporting support to ESQ management; developing and documenting ESQ management systems and procedures; coordinating ESQ's self-assessment and Award Fee self evaluation efforts; coordinating the ESQ departments's communication, total quality, cost savings, and productivity efforts; and tracking ESQ commitments and staffing data. This program element also provides program direction and performance assessment for the ESH ampersand Q division of ICF KH. The ESH ampersand Q Division educates ICF KH management and employees to protect personnel and the environment; identifies, interprets and inspects to requirements; provides administrative and field support; performs final acceptance of construction; assesses effectiveness of ICF KH programs and processes, and performs baseline ESH ampersand Q assessments

  10. Social Insertion in Administration Graduate Programs in Brazilian Public Universities and the Coproduction of the Public Good.

    Directory of Open Access Journals (Sweden)

    José Francisco Salm

    2015-04-01

    Full Text Available This article discusses the actions of social insertion in the graduate programs in administration under the supervision of CAPES, considering the models of co-production. The data used throughout this article are taken from the Collection app from CAPES, from 2007, 2008 and 2009. The actions are identified as functional coproduction (efficiency and formal effectiveness and symbolic coproduction (formal presence of the state and rare cases of actions of representative coproduction with sustainability (sustainable integration with society. It also shows that these actions are made by means of soliciting services to the programs or through request of assistance to society under various forms and by means of mutual adjustment between programs and the society. The data from the Collection do not prove that these programs directly promote social transformation (lack of former student´s feedback. The data also demonstrate that several programs do not have an accurate understanding on what is social insertion or how it should be brought about according to CAPES assessment standards.

  11. Mars Express/MARSIS - Analysis and solution of an anomaly event: MARSIS Data Bad Time Stamp

    Science.gov (United States)

    Giuppi, S.; Cartacci, M.; Cicchetti, A.; Noschese, R.; Orosei, R.

    2011-10-01

    This paper describes the detection, the analysis and the possible solutions of an anomaly event occurred sometimes in MARSIS science data consisting in the corruption of the Spacecraft Event Time (SCET): MARSIS Data Bad Time Stamp.

  12. Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

    CERN Document Server

    Lim, Yongseob; Ulsoy, A Galip

    2014-01-01

    Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

  13. 31 CFR 500.410 - Currency, coins, and postage and other stamps.

    Science.gov (United States)

    2010-07-01

    ... postage and other stamps issued by North Korea, North Viet-Nam, Cambodia, or South Viet-Nam are merchandise of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin subject to § 500.204(a)(1). ...

  14. A burial with a stamp seal depicting a Bes-like figure from Abusir

    Czech Academy of Sciences Publication Activity Database

    Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

    2015-01-01

    Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

  15. High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

    Science.gov (United States)

    Valls, I.; Hamasaiid, A.; Padré, A.

    2017-09-01

    In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

  16. An overview of intravenous-related medication administration errors as reported to MEDMARX, a national medication error-reporting program.

    Science.gov (United States)

    Hicks, Rodney W; Becker, Shawn C

    2006-01-01

    Medication errors can be harmful, especially if they involve the intravenous (IV) route of administration. A mixed-methodology study using a 5-year review of 73,769 IV-related medication errors from a national medication error reporting program indicates that between 3% and 5% of these errors were harmful. The leading type of error was omission, and the leading cause of error involved clinician performance deficit. Using content analysis, three themes-product shortage, calculation errors, and tubing interconnectivity-emerge and appear to predispose patients to harm. Nurses often participate in IV therapy, and these findings have implications for practice and patient safety. Voluntary medication error-reporting programs afford an opportunity to improve patient care and to further understanding about the nature of IV-related medication errors.

  17. Changing perceptions of safety climate in the operating room with the Veterans Health Administration medical team training program.

    Science.gov (United States)

    Carney, Brian T; West, Priscilla; Neily, Julia; Mills, Peter D; Bagian, James P

    2011-01-01

    Perceptions of organizational commitment to safety differ between the operating rooms in high- and medium-complexity facilities of the Veterans Health Administration (VHA). The purpose of this study was to see whether medical team training (MTT) reduced this difference. The Safety Attitudes Questionnaire was administered before and at the completion of a MTT program. The study population consisted of respondents working in the operating room. Responses to the 7 safety climate items were analyzed using nonparametric tests. Before MTT, respondents working at medium-complexity facilities had more favorable perceptions of knowledge of proper channels and encouragement by colleagues to report safety concerns than respondents who work at high-complexity facilities. At completion, there was no difference in perceptions between respondents working at high- and medium-complexity facilities for these items. The VHA MTT program improved perceptions at both high- and medium-complexity facilities and eliminated differences present at baseline.

  18. The National Aeronautics and Space Administration's Earth Science Applications Program: Exploring Partnerships to Enhance Decision Making in Public Health Practice

    Science.gov (United States)

    Vann, Timi S.; Venezia, Robert A.

    2002-01-01

    The National Aeronautics and Space Administration (NASA), Earth Science Enterprise is engaged in applications of NASA Earth science and remote sensing technologies for public health. Efforts are focused on establishing partnerships with those agencies and organizations that have responsibility for protecting the Nation's Health. The program's goal is the integration of NASA's advanced data and technology for enhanced decision support in the areas of disease surveillance and environmental health. A focused applications program, based on understanding partner issues and requirements, has the potential to significantly contribute to more informed decision making in public health practice. This paper intends to provide background information on NASA's investment in public health and is a call for partnership with the larger practice community.

  19. Early experiences of computer-aided assessment and administration when teaching computer programming

    Directory of Open Access Journals (Sweden)

    Abdullah Mohd Zin

    1993-12-01

    Full Text Available This paper describes early experiences with the Ceilidh system currently being piloted at over 30 institutions of higher education. Ceilidh is a course-management system for teaching computer programming whose core is an auto-assessment facility. This facility automatically marks students programs from a range of perspectives, and may be used in an iterative manner, enabling students to work towards a target level of attainment. Ceilidh also includes extensive courseadministration and progress-monitoring facilities, as well as support for other forms of assessment including short-answer marking and the collation of essays for later hand-marking. The paper discusses the motivation for developing Ceilidh, outlines its major facilities, then summarizes experiences of developing and actually using it at the coal-face over three years of teaching.

  20. Information requirements of the National Aeronautics and Space Administration's safety, environmental health, and occupational medicine programs

    Science.gov (United States)

    Whyte, A. A.

    1978-01-01

    A survey of the internal and external reporting and recordkeeping procedures of these programs was conducted and the major problems associated with them are outlined. The impact of probable future requirements on existing information systems is evaluated. This report also presents the benefits of combining the safety and health information systems into one computerized system and recommendations for the development and scope of that system.

  1. An Administrator’s Guide for Animal Facilitated Therapy Programs in Federal Health Care Facilities

    Science.gov (United States)

    1983-07-01

    problems since these are provided by the animalls owner. 2. Species. Dogs, cats, birds, fish, small mammals, and many other types of animals have... biological demands dictate, which usually adds motivation to the owner to maintain a regular regimen. The walking program (without a companion animal...patient into returning to the reality of today, to take care of the animalls needs. The use of animals, even fish, to reduce anxiety and stress, has been

  2. Insulation from basaltic stamp sand. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, F. D.

    1981-04-01

    A Midwest Appropriate Technology Grant was awarded to determine the technical and economic feasibility of producing mineral-fiber insulation directly from extensive deposits of basaltic sand produced during former mining and milling operations in the Keweenaw Peninsula region of Michigan's Upper Peninsula. The amounts of local basaltic sands available and representative chemical compositions were determined. The variation of viscosity with temperature and chemical composition was estimated. Samples were melted and either pulled or blown into fiber. In all cases fiber could be made with a reasonable tensile strength to ensure usefulness. It was concluded that it was technically feasible to produce fibers from basaltic stamp sands of the Upper Peninsula of Michigan. A technical feasibility study using published data, a cost and design analysis of a basalt fiber production plant, a market survey of fiber needs, and an economic analysis for investing in a basalt fiber venture was undertaken. These studies concluded that the local production of basaltic insulation was both feasible and economically reasonable. It was suggested that the plant be located in a region of greater population density with lower utility costs. A representative one-third of these studies is included as appendices A, B, C, and D.

  3. Investigation of the reduction of mouldboard ploughshare wear through hot stamping and hardfacing processes

    OpenAIRE

    YAZICI, Aysel

    2014-01-01

    The effects of the hot stamping process and different hardfacing techniques, such as shielded metal arc welding (SMAW) and gas metal arc welding (GMAW), on the abrasive wear of ploughshares were investigated under field operational conditions. The abrasive wear losses were determined by measuring the weight and dimension changes before and after tillage. The wear losses of hot-stamped and hardfaced ploughshares were less significant than those of the conventionally heat-treated ploughshare sp...

  4. Springback analysis of AA5754 after hot stamping: Experiments and FE modelling

    OpenAIRE

    Wang, A; Zhong, K; El Fakir, O; Sun, C; Wang, L; Lin, J; Dean, TA

    2016-01-01

    In this paper, the springback of the aluminium alloy AA5754 under hot stamping conditions was characterised under stretch and pure bending conditions. It was found that elevated temperature stamping was beneficial for springback reduction, particularly when using hot dies. Using cold dies, the flange springback angle decreased by 9.7 % when the blank temperature was increased from 20 to 450 ?C, compared to the 44.1 % springback reduction when hot dies were used. Various other forming conditio...

  5. First intramuscular administration in the U.S. space program. [of motion sickness drugs

    Science.gov (United States)

    Bagian, James P.

    1991-01-01

    In the past, the only kind of medicines used for symptomatic treatment of space motion sickness (SMS) in space had been oral, transdermal, or suppositories. This paper describes the effect of the first intramuscular (IM) administration of Phenergan (50-mg in single dose) on SMS in one subject who exhibited grade-3 symptoms and signs which persisted unabated throughout the first and the second flight days aboard the Space Shuttle. Thirty minutes after the injection, the subject had completely recovered. His symptoms were gone, his appetite was back, and he had no recurrences for the remainder of the flight. Since that experiment, intramuscular injections have been given nine more times on subsequent flights, with similar results.

  6. A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

    Science.gov (United States)

    Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

    2011-08-01

    Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

  7. Hot Stamping of Boron Steel Using Partition Heating for Tailored Properties: Experimental Trials and Numerical Analysis

    Science.gov (United States)

    Mu, Yanhong; Wang, Baoyu; Zhou, Jing; Huang, Xu; Li, Xuetao

    2017-11-01

    Hot-stamped components with tailored properties are becoming popular for their better performance in collision. In this article, an M-shaped part with varying properties was formed by hot stamping using partition heating. Different soaking temperatures induce different austenite fractions at the different regions of the blank, resulting in the partitioned microstructure and mechanical properties in a single part. In the high-temperature region, the average tensile strength and elongation are 1565 MPa and 8.65 pct, respectively, and the average tensile strength and elongation are 626 MPa and 24.37 pct, respectively, in the low-temperature region. A finite element model of hot stamping using partition heating was established based on the relationship of austenite fraction with heating temperature determined by the dilatometer test and the stress-strain curve of 22MnB5 with different austenite fractions acquired from the hot tensile test.The differences of temperature, thickness, and Vickers hardness in different zones of the M-shaped part during forming and quenching stages were analyzed. The effects of hot stamping parameters, such as stamping velocity and heating temperature, on the forming and mechanical properties of the tailored M-shaped part were investigated, providing theoretical guidance for the production of tailored hot-stamped components using partition heating.

  8. Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

    Science.gov (United States)

    Wang, Yuhuang [Evanston, IL; Hauge, Robert H [Houston, TX; Schmidt, Howard K [Houston, TX; Kim, Myung Jong [Houston, TX; Kittrell, W Carter [Houston, TX

    2009-09-08

    The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

  9. Succession planning for the future through an academic-practice partnership: a nursing administration master's program for emerging nurse leaders.

    Science.gov (United States)

    Sherman, Rose; Dyess, Susan; Hannah, Ed; Prestia, Angela

    2013-01-01

    A global nursing leadership shortage is projected by the end of this decade. There is an urgent need to begin developing emerging nurse leaders now. This article describes the work of an academic-practice partnership collaborative of nurse leaders. The goal of the partnership is to develop and promote an innovative enhanced nursing administration master's program targeted to young emerging nurse leaders, who have not yet moved into formal leadership roles. An action research design is being used in program development and evaluation. Qualities needed by emerging leaders identified through research included a need to be politically astute, competency with business skills required of nurse leaders today, comfort with ambiguity, use of a caring approach, and leadership from a posture of innovation. The current curriculum was revised to include clinical immersion with a nurse leader from the first semester in the program, a change from all online to online/hybrid courses, innovative assignments, and a strong mentorship component. Eighteen young emerging nurse leaders began the program in January 2012. Early outcomes are positive. The emerging nurse leaders may be uniquely positioned, given the right skills sets, to be nurse leaders in the new age.

  10. Re-Living Dangerous Memories: Online Journaling to Interrogate Spaces of "Otherness" in an Educational Administration Program at a Midwestern University

    Science.gov (United States)

    Friend, Jennifer; Caruthers, Loyce; McCarther, Shirley Marie

    2009-01-01

    This theoretical paper explores the use of online journaling in an educational administration program to interrogate spaces of "otherness"--the geographical spaces of cities where poor children and children of color live--and the dangerous memories prospective administrators may have about diversity. The cultures of most educational administration…

  11. Modelo Crosscultural de Pasantias para Lideres de la Educacion: Cooperacion entre Estados Unidos y Venezuela (Designing an Effective School Administrator Internship Program: United States and Venezuela Cooperation).

    Science.gov (United States)

    Serafin, Ana Gil; Thompson, Eugene W.

    A model was developed of an internship program designed to give valuable cross-cultural experience to school administrators in training at universities in the United States and Venezuela. A naturalistic approach was used to develop the model. Leading school administrators and educational leadership theorists in both countries were interviewed by…

  12. A Study of the Perceptions of Doctor of Nursing (DNP) Program Administrators regarding the Integration of Acupuncture and Acupressure in DNP Curricula

    Science.gov (United States)

    Voight, Rebecca W.

    2012-01-01

    The purpose of this quantitative descriptive study was to explore the perceptions of DNP administrators regarding the extent acupuncture and acupressure are addressed in DNP curricula. Five research questions were addressed: 1. What are the perspectives of DNP program administrators regarding acupuncture and acupressure? 2. What are the…

  13. Programmed administration of parathyroid hormone increases bone formation and reduces bone loss in hindlimb-unloaded ovariectomized rats

    Science.gov (United States)

    Turner, R. T.; Evans, G. L.; Cavolina, J. M.; Halloran, B.; Morey-Holton, E.

    1998-01-01

    Gonadal insufficiency and reduced mechanical usage are two important risk factors for osteoporosis. The beneficial effects of PTH therapy to reverse the estrogen deficiency-induced bone loss in the laboratory rat are well known, but the influence of mechanical usage in this response has not been established. In this study, the effects of programed administration of PTH on cancellous bone volume and turnover at the proximal tibial metaphysis were determined in hindlimb-unloaded, ovariectomized (OVX), 3-month-old Sprague-Dawley rats. PTH was administered to weight-bearing and hindlimb-unloaded OVX rats with osmotic pumps programed to deliver 20 microg human PTH (approximately 80 microg/kg x day) during a daily 1-h infusion for 7 days. Compared with sham-operated rats, OVX increased longitudinal and radial bone growth, increased indexes of cancellous bone turnover, and resulted in net resorption of cancellous bone. Hindlimb unloading of OVX rats decreased longitudinal and radial bone growth, decreased osteoblast number, increased osteoclast number, and resulted in a further decrease in cancellous bone volume compared with those in weight-bearing OVX rats. Programed administration of PTH had no effect on either radial or longitudinal bone growth in weight-bearing and hindlimb-unloaded OVX rats. PTH treatment had dramatic effects on selected cancellous bone measurements; PTH maintained cancellous bone volume in OVX weight-bearing rats and greatly reduced cancellous bone loss in OVX hindlimb-unloaded rats. In the latter animals, PTH treatment prevented the hindlimb unloading-induced reduction in trabecular thickness, but the hormone was ineffective in preventing either the increase in osteoclast number or the loss of trabecular plates. Importantly, PTH treatment increased the retention of a baseline flurochrome label, osteoblast number, and bone formation in the proximal tibial metaphysis regardless of the level of mechanical usage. These findings demonstrate that

  14. Air quality analysis and related risk assessment for the Bonneville Power Administration's Resource Program

    International Nuclear Information System (INIS)

    Glantz, C.S.; Burk, K.W.; Driver, C.J.; Liljegren, J.C.; Neitzel, D.A.; Schwartz, M.N.; Dana, M.T.; Laws, G.L.; Mahoney, L.A.; Rhoads, K.

    1992-04-01

    The Bonneville Power Administration (BPA) is considering 12 different alternatives for acquiring energy resources over the next 20 years. Each of the alternatives utilizes a full range of energy resources (e.g., coal, cogeneration, conservation, and nuclear); however, individual alternatives place greater emphases on different types of power-producing resources and employ different timetables for implementing these resources. The environmental impacts that would result from the implementation of each alternative and the economic valuations of these impacts, will be an important consideration in the alternative selection process. In this report we discuss the methods used to estimate environmental impacts from the resource alternatives. We focus on pollutant emissions rates, ground-level air concentrations of basic criteria pollutants, the acidity of rain, particulate deposition, ozone concentrations, visibility attenuation, global warming, human health effects, agricultural and forest impacts, and wildlife impacts. For this study, pollutant emission rates are computed by processing BPA data on power production and associated pollutant emissions. The assessment of human health effects from ozone indicated little variation between the resource alternatives. Impacts on plants, crops, and wildlife populations from power plant emissions are projected to be minimal for all resource alternatives

  15. The Trump Administration's assault on health and social programs: potential consequences for older hispanics.

    Science.gov (United States)

    Angel, Jacqueline L; Berlinger, Nancy

    2018-04-10

    Health and social welfare policy proposals put forth by the Trump administration and Republican-controlled Congress could have huge impacts on low-income groups. This paper focuses on older Hispanics, with an emphasis on the Mexican-origin population who form the largest Hispanic subgroup. A demographic portrait is presented which indicates that Mexican-origin individuals have less wealth and lower incomes than do non-Hispanic whites. Given rising health care costs, lower use of nursing homes, and greater propensity to live with grown children, prevailing economic disadvantage has serious consequences for this population. More restrictive immigration policies aimed at limiting family reunification could have intergenerational caregiving consequences. In addition, because of labor-force disadvantages, low-income Mexican-origin adults are less likely to have private insurance, compared to non-Hispanic whites, as they approach retirement. Consequently, Mexican-origin older adults tend to rely on Medicaid when eligible; by contrast, late-life migrants who do not qualify for federally funded benefits for at least five years, and unauthorized migrants, who are excluded from federally funded benefits, have extremely limited access to safety-net provisions. The potential effects of proposed cut backs in health care financing on older Hispanics is discussed.

  16. 75 FR 24450 - Early Retiree Reinsurance Program

    Science.gov (United States)

    2010-05-05

    ... comments in the CMS drop slots located in the main lobby of the building. A stamp- in clock is available... regulatory terminology and concepts should be the same or similar between the RDS Program and the Early...

  17. A Program for the Preparation and Certification of School Administrators. Program E--Learning Resource Specialist. In Compliance with Guidelines and Standards for the Development and Approval of Programs of Preparation Leading to Certification [of] School Professional Personnel.

    Science.gov (United States)

    Canzler, Lillian

    The initial and continuing competencies needed by a district-level administrator in educational media or learning resources are outlined. An introductory discussion covers internship program procedures, supervision and evaluation, record keeping and reports, and competencies and skills. Competencies are then defined, the use of the format is…

  18. Tribological performances of new steel grades for hot stamping tools

    Science.gov (United States)

    Medea, F.; Venturato, G.; Ghiotti, A.; Bruschi, S.

    2017-09-01

    In the last years, the use of High Strength Steels (HSS) as structural parts in car body-in-white manufacturing has rapidly increased thanks to their favourable strength-to-weight ratio and stiffness, which allow a reduction of the fuel consumption to accommodate the new restricted regulations for CO2 emissions control. The survey of the technical and scientific literature shows a large interest in the development of different coatings for the blanks from the traditional Al-Si up to new Zn-based coatings and on the analysis of hard PVD, CVD coatings and plasma nitriding applied on the tools. By contrast, fewer investigations have been focused on the development and test of new tools steels grades capable to improve the wear resistance and the thermal properties that are required for the in-die quenching during forming. On this base, the paper deals with the analysis and comparison the tribological performances in terms of wear, friction and heat transfer of new tool steel grades for high-temperature applications, characterized by a higher thermal conductivity than the commonly used tools. Testing equipment, procedures as well as measurements analyses to evaluate the friction coefficient, the wear and heat transfer phenomena are presented. Emphasis is given on the physical simulation techniques that were specifically developed to reproduce the thermal and mechanical cycles on the metal sheets and dies as in the industrial practice. The reference industrial process is the direct hot stamping of the 22MnB5 HSS coated with the common Al-Si coating for automotive applications.

  19. Case management of the elderly in a health maintenance organization: the implications for program administration under managed care.

    Science.gov (United States)

    Marshall, B S; Long, M J; Voss, J; Demma, K; Skerl, K P

    1999-01-01

    Kaiser Permanente initiated a two-year demonstration ambulatory case management program in its Ohio region to evaluate five outcomes: perceived health status, functional status, and satisfaction with care, service use, and service costs. Expected results were not consistently obtained for the five outcome measures. Treatment group members did not, however, experience the functional status impairments or decline in health status perceptions reported by the control group during the study period. The unexpected finding that costs were not affected may be attributed to the type of case management intervention used in the demonstration program. This study is broadly applicable to managed care settings facing the challenge of developing programs to minimize the risk for bearing the costs of the Medicare beneficiaries' overall health when all services are not covered. Managed care administrators should be favorably disposed to implementing a case management model with the potential for affecting functional status, the most significant predictor of expensive continuing care for this cohort of Medicare beneficiaries, while working to develop more effective protocols and resource control strategies.

  20. The organizational structure and governing principles of the Food and Drug Administration's Mini-Sentinel pilot program.

    Science.gov (United States)

    Forrow, Susan; Campion, Daniel M; Herrinton, Lisa J; Nair, Vinit P; Robb, Melissa A; Wilson, Marcus; Platt, Richard

    2012-01-01

    The US Food and Drug Administration's Mini-Sentinel pilot program is developing an organizational structure as well as principles and policies to govern its operations. These will inform the structure and function of the eventual Sentinel System. Mini-Sentinel is a collaboration that includes 25 participating institutions. We describe the program's current organizational structure and its major principles and policies. The organization includes a coordinating center with program leadership provided by a principal investigator; a planning board and subcommittees; an operations center; and data, methods, and protocol cores. Ad hoc workgroups are created as needed. A privacy panel advises about protection of individual health information. Principles and policies are intended to ensure that Mini-Sentinel conforms to the principles of fair information practices, protects the privacy of individual health information, maintains the security and integrity of data, assures the confidentiality of proprietary information, provides accurate and timely communications, prevents or manages conflicts of interest, and preserves respect for intellectual property rights. Copyright © 2012 John Wiley & Sons, Ltd.

  1. Bonneville Power Administration Transmission System Vegetation Management Program - Final Environmental Impact Statement

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    2000-06-23

    Bonneville is responsible for maintaining a network of 24,000 kilometers (km) or 15,000 miles (mi.) of electric transmission lines and 350 substations in a region of diverse vegetation. This vegetation can interfere with electric power flow, pose safety problems for us and the public, and interfere with our ability to maintain these facilities. We need to (1) keep vegetation away from our electric facilities; (2) increase our program efficiency and consistency; (3) review herbicide use (under increased public scrutiny); and (4) maximize the range of tools we can use while minimizing environmental impact (Integrated Vegetation Management). This Final Environmental Impact Statement (FEIS) establishes Planning Steps for managing vegetation for specific projects (to be tiered to this Environmental Impact Statement (EIS)). In addition to No Action (current practice), alternatives are presented for Rights-of-way, Electric Yards, and Non-electric Facilities (landscaping, work yards). Four vegetation control methods are analyzed manual, mechanical, herbicide, and biological. Also evaluated are 23 herbicide active ingredients and 4 herbicide application techniques (spot, localized, broadcast, and aerial). For rights-of-way, we consider three sets of alternatives: alternative management approaches (time-driven or establishing low-growing plant communities); alternative method packages; and, if herbicides are in a methods package, alternative vegetation selections (noxious weeds, deciduous, or any vegetation). For electric yards, one herbicide-use alternative is considered. For non-electric facilities, two method package alternatives are considered. For rights-of-way, the environmentally preferred alternative(s) would use manual, mechanical, and biological control methods, as well as spot and localized herbicide applications for noxious and deciduous plant species; the BPA-preferred alternative(s) would add broadcast and aerial herbicide applications, and would use herbicides

  2. Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping

    OpenAIRE

    Chokshi, Prasun; Dashwood, R. J.; Hughes, Darren J.

    2017-01-01

    Because of demand for lower emissions and better crashworthiness, the use of hot stamped 22MnB5 boron steel has greatly increased in manufacturing of automobile components. However, for many applications it is required that only certain regions in hot stamped parts are fully hardened whereas other regions need be more ductile. The innovative process of tailored hot stamping does this by controlling the localized microstructures through tailored cooling rates by dividing the tooling into heate...

  3. The Perceived Value of University-Based, Continuing Education Leadership Development Programs for Administrators in Higher Education: An Intangibles Model of Value Creation

    Science.gov (United States)

    Stone, Geraldine Louise

    2012-01-01

    This study examined the perceived value of leadership development programs (LDPs) provided by continuing education for administrators in colleges and universities. Included in this study were questions about the perceived value of non-credit, credit, and blended (credit and non-credit) programs at the individual, institutional, and higher…

  4. Organization and Administration of Adult Education Programs: A Guide for Practitioners. Adult Education Special Topics: Theory, Research and Practice in LifeLong Learning

    Science.gov (United States)

    Schmidt, Steven W.; Biniecki, Susan M. Yelich

    2016-01-01

    Administrators of adult education programs work in dynamic and ever-changing environments. They are continually challenged with a myriad of issues related to program budgeting, marketing, strategic planning, funding, human resources, and other topics. With decades of real world experience in the field, Steven Schmidt and Susan Yelich Biniecki have…

  5. A Comparison of Mail and Telephone Administration of District-Level Questionnaires for the School Health Policies and Programs Study (SHPPS) 2006: Effects on Estimates and Data Quality

    Science.gov (United States)

    Denniston, Maxine; Brener, Nancy

    2010-01-01

    Background: The School Health Policies and Programs Study (SHPPS) is a national study periodically conducted to assess school health policies and programs at the state, district, school, and classroom levels. For SHPPS 2006, district-level questionnaires were designed for telephone administration, but mixed-mode data collection that also used…

  6. [Let us not underestimate the importance of good long-term programming and competent administration of health care].

    Science.gov (United States)

    Holcík, J

    2009-01-01

    The origin of Social Medicine is in the theories on the health services in the 18th and 19th centuries. The first step was establishing so-called State Medicine. Socio-medical thinking, the beginnings of which were determined by the process of the industrial revolution and the increasing social differences, led at the beginning of 20th century to the first attempts to establish Social Medicine as a separate medical discipline. In the history of Social Medicine in the Czech Republic the important personalities were mainly professors Frantisek Procházka, Frantisek Hamza, Hynek Pelc, and Adolf Zácek. The main motivation of qualitative changes of Social Medicine in Czechoslovakia after 1989 were great political, economic and social changes, documents of the World Health Organization and the European health policy. Present health care reform brings new opportunities, challenges, and problems. As a tool of its implementation a long-term programming based on human values should be used in a larger scale. The adequate professional skills in health care administration are indispensable. Article presents concise information on the work of the Society of Social Medicine and Health Care Administration of the Czech Medical Society of J. E. Purkynje.

  7. Stamped coal cakes in cokemaking technology Part 2 - The investigation of cake strength

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before the pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the cokemaking plant using cost efficient raw materials, but also increases oven throughput. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend and as a function of the stamping energy. In the first part of the paper, investigations on the stampability of coal blends were reported. In this paper, the development of a new strength test device for the systematic investigation of mechanical strength of coal compacts produced by stamping is described. Results from compressive strength tests indicate an elastic-plastic behaviour with failure by plastic fracture. Shear test results show similarity to the yield limit description in soil mechanics.

  8. Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

    Science.gov (United States)

    Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

    2017-04-01

    The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

  9. Perceptions of academic administrators of the effect of involvement in doctoral programs on faculty members' research and work-life balance.

    Science.gov (United States)

    Smeltzer, Suzanne C; Sharts-Hopko, Nancy C; Cantrell, Mary Ann; Heverly, Mary Ann; Wise, Nancy; Jenkinson, Amanda

    Support for research strongly predicts doctoral program faculty members' research productivity. Although academic administrators affect such support, their views of faculty members' use of support are unknown. We examined academic administrators' perceptions of institutional support and their perceptions of the effects of teaching doctoral students on faculty members' scholarship productivity and work-life balance. An online survey was completed by a random sample of 180 deans/directors of schools of nursing and doctoral programs directors. Data were analyzed with descriptive statistics, chi-square analysis, and analysis of variance. Deans and doctoral program directors viewed the level of productivity of program faculty as high to moderately high and unchanged since faculty started teaching doctoral students. Deans perceived better administrative research supports, productivity, and work-life balance of doctoral program faculty than did program directors. Findings indicate the need for greater administrative support for scholarship and mentoring given the changes in the composition of doctoral program faculty. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Quality Oncology Practice Initiative Certification Program: measuring implementation of chemotherapy administration safety standards in the outpatient oncology setting.

    Science.gov (United States)

    Gilmore, Terry R; Schulmeister, Lisa; Jacobson, Joseph O

    2013-03-01

    The Quality Oncology Practice Initiative (QOPI) Certification Program (QCP) evaluates individual outpatient oncology practice performance in areas that affect patient care and safety and builds on the American Society of Clinical Oncology (ASCO) QOPI by assessing the compliance of a practice with certification standards based on the ASCO/Oncology Nursing Society standards for safe chemotherapy administration. To become certified, a practice must attain a benchmark quality score on certification measures in QOPI and attest that it complies with 17 QCP standards. Structured on-site reviews, initially performed in randomly selected practices, became mandatory beginning in September 2011. Of 111 practices that have undergone on-site review, only two were fully concordant with all of the standards (median, 11; range, seven to 17). Most practices were subsequently able to modify practice to become QOPI certified. The QCP addresses the call from the Institute of Medicine to close the quality gap by aligning evidence-based guidelines and consensus-driven standards with requirements for oncology practices to develop and maintain structural safety components, such as policies and procedures that ensure practice performance. On-site practice evaluation is a high-impact component of the program.

  11. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  12. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    Directory of Open Access Journals (Sweden)

    Nosova Ekaterina

    2017-01-01

    Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

  13. Modeling the constitutive and frictional behavior of PTFE flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Hattel, Jesper Henri

    2013-01-01

    In the present work, the deformation on micro-scale of PTFE flexible stamps for nanoimprint lithography is modeled. This is achieved via a combination of proper models for the constitutive behavior as well as the frictional conditions between the deforming PTFE stamp and the steel tool. The model...... was verified through an experiment, where a PTFE sheet was deformed by a steel sphere mounted in a tensile test machine. Good agreement between simulations and experimental results is found, both regarding force–displacement and corresponding principal strain measurements. As expected, applying the correct...... frictional behavior between PTFE and steel on micro-scale is shown to be of major importance in order to accurately simulate the strain field in the deformed PTFE stamp. © 2013 Elsevier B.V. All rights reserved...

  14. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    International Nuclear Information System (INIS)

    Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

    2016-01-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

  15. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    Science.gov (United States)

    Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

    2016-02-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

  16. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  17. Investigation of the influence of process parameters on adhesive wear under hot stamping conditions

    Science.gov (United States)

    Schwingenschlögl, P.; Weldi, M.; Merklein, M.

    2017-09-01

    Current challenges like increasing safety standards and reducing fuel consumption motivate lightweight construction in modern car bodies. Besides using lightweight workpiece materials like aluminum, hot stamping has been established as a key technology for producing safety relevant components. Producing hot stamped parts out of ultra-high strength steels offers the possibility to improve the crash performance. At the same time the weight of car structure is reduced by using thinner sheet thicknesses. In order to avoid oxide scale formation and ensure corrosion protection, AlSi coatings are commonly deposited on the sheet surfaces used for direct hot stamping. This workpiece coating has a critical impact on the tribological conditions within the forming process and, as a consequence, influences the quality of hot stamped parts as well as tool wear. AlSi coatings have been identified as major reason for adhesive wear, which represents the main wear mechanism in hot stamping. Within this study, the influence of the process parameters on adhesive wear are investigated in dependency of workpiece and tool temperatures, drawing velocities and contact pressures. The tribological behavior is analyzed based on strip drawing experiments under direct hot stamping conditions. The experiments are performed with AlSi coated 22MnB5 in contact with the hot working tool steel 1.2367. For analyzing the amount of adhesion on the friction jaws, the surfaces are characterized by optical measurements. The experiments indicate that higher workpiece temperatures cause severe adhesive wear on the tool surface, while an increase of drawing velocity or contact pressure led to reduced adhesion. The measured friction coefficients decreased with rising amount of adhesion and remained at a constant level after a certain adhesive layer was built up on the tool surface.

  18. STAMPS: software tool for automated MRI post-processing on a supercomputer

    OpenAIRE

    Bigler, Don C.; Aksu, Yaman; Yang, Qing X.

    2009-01-01

    This paper describes a Software Tool for Automated MRI Post-processing (STAMP) of multiple types of brain MRIs on a workstation and for parallel processing on a supercomputer (STAMPS). This software tool enables the automation of nonlinear registration for a large image set and for multiple MR image types. The tool uses standard brain MRI post-processing tools (such as SPM, FSL, and HAMMER) for multiple MR image types in a pipeline fashion. It also contains novel MRI post-processing features....

  19. A compact system for large-area thermal nanoimprint lithography using smart stamps

    DEFF Research Database (Denmark)

    Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

    2008-01-01

    We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure f...... is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for mu m-scale features is demonstrated....

  20. Development and introduction of stamping technique for large-size laterals of NPP pipelines

    International Nuclear Information System (INIS)

    Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

    1984-01-01

    The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

  1. Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

    International Nuclear Information System (INIS)

    Zhang Fengxiang; Low, Hong Yee

    2008-01-01

    Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

  2. FDA (Food and Drug Administration) compliance program guidance manual and updates (FY 86). Section 4. Medical and radiological devices. Irregular report

    International Nuclear Information System (INIS)

    1986-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

  3. Internet-Based Training to Improve Preschool Playground Safety: Evaluation of the Stamp-in-Safety Programme

    Science.gov (United States)

    Schwebel, David C.; Pennefather, Jordan; Marquez, Brion; Marquez, Jessie

    2015-01-01

    Objective: Playground injuries result in over 200,000 US pediatric emergency department visits annually. One strategy to reduce injuries is improved adult supervision. The Stamp-in-Safety programme, which involves supervisors stamping rewards for children playing safely, has been demonstrated in preliminary classroom-based work to reduce child…

  4. Experimental Investigations of the In-Die Quenching Efficiency and Die Surface Temperature of Hot Stamping Aluminium Alloys

    Directory of Open Access Journals (Sweden)

    Kailun Zheng

    2018-04-01

    Full Text Available The in-die quenching is a key stage in the hot stamping volume production chain which determines the post-formed strength of lightweight alloy components, tool life, and hot stamping productivity. In this paper, the performance of in-die quenching, reflected by the quenching efficiency (the time of work-piece held within stamping dies and die surface temperature during the simulated hot stamping process of AA6082, was experimentally and analytically investigated. A range of in-die quenching experiments were performed for different initial work-piece and die temperatures, quenching pressures, work-piece thickness, and die clearances, under hot stamping conditions. In addition, a one-dimensional (1D closed-form heat transfer model was used to calculate the die surface temperature evolution that is difficult to obtain during practical manufacture situations. The results have shown that the in-die quenching efficiency can be significantly increased by decreasing the initial work-piece and die temperatures. Die clearances are required to be designed precisely to obtain sufficiently high quenching rates and satisfying post-formed strength for hot-stamped panel components. This study systematically considered an extensive variety of influencing factors on the in-die quenching performance, which can provide practical guides for stamping tool designers and manufacture systems for hot-stamping volume production.

  5. Perceptions by Faculty, Staff, and Administrators of the Role of Intercollegiate Athletics at a Metropolitan University as a NCAA Division II Athletics Program Reclassifies to a NCAA Division I Athletics Program

    Science.gov (United States)

    Meisel, John B.; Navin, John C.; Sullivan, Timothy S.

    2014-01-01

    This article provides empirical findings associated with the perceptions of faculty, staff, and administrators regarding a decision to reclassify a metropolitan university's athletics program from NCAA Division II to NCAA Division I. A survey is developed that asks respondents about their perceptions of the current state of the athletics program,…

  6. Development and application of an objective staffing calculator for antimicrobial stewardship programs in the Veterans Health Administration.

    Science.gov (United States)

    Echevarria, Kelly; Groppi, Julie; Kelly, Allison A; Morreale, Anthony P; Neuhauser, Melinda M; Roselle, Gary A

    2017-11-01

    The development and validation of a staffing calculator and its use in creating staffing guidance for antimicrobial stewardship programs (ASPs) in Veterans Health Administration (VHA) facilities are described. The Tools and Resources Work Group of the Antimicrobial Stewardship Task Force and PBM Clinical Pharmacy Practice Office of the Department of Veterans Affairs developed, tested, and validated a staffing calculator to track patient care and ASP management activities needed to maintain a comprehensive ASP. Time spent on activities was based on time-in-motion tracking studies and input from experienced antimicrobial stewards. The staffing calculator was validated across VHA facilities of varying sizes and complexities to determine the number of needed clinical pharmacist full-time equivalents (FTEs) to implement and maintain ASPs per 100 occupied beds. A total of 12 facilities completed the staffing calculator for 1 calendar week. The median number of occupied beds was 226. Most facilities had at least 100 occupied beds, and 6 of the 12 were considered high complexity facilities. The median calculated FTE personnel requirement was 2.62, or 1.01 per 100 occupied beds. The majority of FTE time (70%) was spent on patient care activities and 30% on program management activities, including infectious diseases or ASP rounds. The final recommendations indicated that in order to implement and manage a robust ASP, a pharmacist FTE investment of 1.0 per 100 occupied beds would be needed. A staffing calculator to account for the time needed to implement ASP activities and provide staffing guidance across a large health-care system was validated. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  7. Stamping an S on DMEK Donor Tissue to Prevent Upside-Down Grafts: Laboratory Validation and Detailed Preparation Technique Description.

    Science.gov (United States)

    Veldman, Peter B; Dye, Philip K; Holiman, Jeffrey D; Mayko, Zachary M; Sáles, Christopher S; Straiko, Michael D; Stoeger, Christopher G; Terry, Mark A

    2015-09-01

    To report endothelial cell loss (ECL) caused by a novel S-stamp preparation technique for Descemet membrane endothelial keratoplasty (DMEK). Six cadaveric human corneas were prepared for DMEK transplantation using a single standardized technique, including the application of a dry ink gentian violet S-stamp to the stromal side of Descemet membrane. Endothelial cell death was evaluated and quantified using computerized analysis of vital dye staining. ECL caused by the S-stamp was 0.6% (range 0.1%-1.0%), which comprised less than one-tenth of the total ECL caused by our preparation of the DMEK graft from the start to finish, including recovery, prestripping, S-stamping, and trephination (13.7% total ECL, range 9.9%-17.6%). Our novel S-stamp donor tissue preparation technique is intuitive to learn and holds the promise of preventing iatrogenic primary graft failure due to upside-down grafts without causing unacceptable increases in ECL.

  8. Aluminium Pneumoconiosis I. In Vitro Comparison of Stamped Aluminium Powders Containing Different Lubricating Agents and a Granular Aluminium Powder

    Science.gov (United States)

    Corrin, B.

    1963-01-01

    The discrepancy in previous reports of the action of aluminium on the lung may be explained by differences between stamped and granular aluminium powders. A stamped powder of the variety causing pulmonary fibrosis showed a brisk reaction with water, but a granular powder was unreactive. This difference is primarily due to the granular particles being covered by inert aluminium oxide, the formation of which is partially prevented in the stamping process by stearine and mineral oil. The reactivity of the flake-like stamped particles is also dependent on their large surface area per unit volume. The appearance of aluminium pneumoconiosis in Britain is explained by the introduction of mineral oil into the stamping industry for, in contrast to stearine, mineral oil permits the powder to react with water. The lung damage is believed to be caused by a soluble form of aluminium. PMID:14072616

  9. 45 CFR 1301.32 - Limitations on costs of development and administration of a Head Start program.

    Science.gov (United States)

    2010-10-01

    .../property clerk, janitor for administrative office space, and costs associated with volunteers carrying out... 45 Public Welfare 4 2010-10-01 2010-10-01 false Limitations on costs of development and... and General Administration § 1301.32 Limitations on costs of development and administration of a Head...

  10. The Pine Ridge-Mayo National Aeronautics and Space Administration telemedicine project: program activities and participant reactions.

    Science.gov (United States)

    Kottke, T E; Little Finger, L; Trapp, M A; Panser, L A; Novotny, P J

    1996-04-01

    To determine the response of participants to the Pine Ridge-Mayo National Aeronautics and Space Administration telemedicine project. We describe a 3-month demonstration project of medical education and clinical consultations conducted by means of satellite transmission. Postparticipation questionnaires and a postproject survey were used to assess the success of the activity. Patients and employees at the Pine Ridge Indian Health Service Hospital in southwestern South Dakota and employees at Mayo Clinic Rochester participated in a telemedicine project, after which they completed exit surveys and a postproject questionnaire to ascertain the acceptability of this mode of health care. Almost all Pine Ridge and Mayo Clinic participants viewed the project as beneficial. The educational sessions received favorable evaluations, and almost two-thirds of the patients who completed evaluations thought the consultation had contributed to their medical care. More than 90% of the respondents from Pine Ridge and more than 85% of the respondents from Mayo Clinic Rochester said that they would recommend participation in this project to others. More than 90% of respondents from Pine Ridge and 80% of Mayo respondents agreed with the statement that the project should continue. These data suggest that a program of clinical consultation services, professional education, and patient education available by telemedicine might be viewed as beneficial.

  11. 7 CFR 1700.53 - Persons serving as Acting Administrator.

    Science.gov (United States)

    2010-01-01

    ...) Assistant Administrator, Electric Program. (3) Assistant Administrator, Water and Environmental Programs. (4) Assistant Administrator, Telecommunications Programs. (5) Assistant Administrator, Program Accounting and Regulatory Analysis. (6) Community Programs Director of the Rural Development Kentucky State Office. (c...

  12. THE FUNCTIONS OF PUBLIC ADMINISTRATION IN THE LAW ON THE SPECIAL FORECASTS AND PROGRAMMING FUNCTIONS AND THE RELATIONSHIP WITH CITIZENS

    OpenAIRE

    Iulian M. NEDELCU

    2010-01-01

    The function is defined as "administrative task that someone provides regularly and organized in an institution, for a salary" or the "rank that someone has in an administrative hierarchy”. In relation to public administration, the function is a set of tasks set by law or by acts issued on the basis of law, tasks that a person engaged in a public administration body has, and is legally empowered to perform these functions of the public administration. Law no. 188/1999 republished and amended ...

  13. Webb Administration

    OpenAIRE

    Prahl, Hampus

    2005-01-01

    I’ve built an Internet based administration front-end for the company Allt I Brand in Jamjö. Allt I Brand’s main goals are maintenance and sale of fire preventive equipment. This front-end is programmed mostly in PHP, connected to a MySQL database. Because both Allt I Brand’s main page and my administration front-end use the same database and the database is designed to virtually fit any type of company, the result is both dynamic and powerful. The front-end design is made to make it easy to ...

  14. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    Science.gov (United States)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-03-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation.

  15. Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

    NARCIS (Netherlands)

    Karanikas, Nektarios; Schwarz, M; Harfmann, J

    2017-01-01

    A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

  16. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2012-12-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  17. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2013-02-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  18. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    International Nuclear Information System (INIS)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-01-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

  19. 41 CFR 101-25.103-4 - Disposition of promotional materials, trading stamps, or bonus goods.

    Science.gov (United States)

    2010-07-01

    ..., arrange for transfer of promotional materials, trading stamps, or bonus goods, without reimbursement in...) The contract does not contain a price reduction clause, or (2) The contractor refuses to grant a price... promotional items as a price reduction, and (4) The procuring or receiving agency has no practical use for the...

  20. Impacting Mediators of Change for Physical Activity among Elderly Food Stamp Recipients

    Science.gov (United States)

    Dye, Cheryl J.; Williams, Joel E.; Kemper, Karen A.; McGuire, Francis A.; Aybar-Damali, Begum

    2012-01-01

    A multidisciplinary team developed and pilot-tested a curriculum, delivered by trained lay educators, to increase self-efficacy for physical activity among elderly food stamp recipients. Curriculum development was guided by a comprehensive literature review. Process evaluation was used to revise the curriculum and to assess lay educator training…

  1. Fabrication of microlens array on silicon surface using electrochemical wet stamping technique

    Science.gov (United States)

    Lai, Lei-Jie; Zhou, Hang; Zhu, Li-Min

    2016-02-01

    This paper focuses on the fabrication of microlens array (MLA) on silicon surface by taking advantage of a novel micromachining approach, the electrochemical we stamping (E-WETS). The E-WETS allows the direct imprinting of MLA on an agarose stamp into the substrate through a selective anodic dissolution process. The pre-patterned agarose stamp can direct and supply the solution preferentially on the contact area between the agarose stamp and the substrate, to which the electrochemical reaction is confined. The anodic potential vs. saturated calomel electrode is optimized and 1.5 V is chosen as the optimum value for the electrochemical polishing of p-Si. A refractive MLA on a PMMA mold is successfully transferred onto the p-Si surface. The machining deviations of the fabricated MLA from those on the mold are 0.44% in diameter and 2.1% in height respectively, and the machining rate in HF is around 1.1 μm/h. The surface roughness of the fabricated MLA is less than 12 nm owing to the electrochemical polishing process. The results demonstrate that E-WETS is a promising approach to fabricate MLA on p-Si surface with high accuracy and efficiency.

  2. Honoring Avicenna, the great Persian physician on the world's postage stamps.

    Science.gov (United States)

    Afshar, Ahmadreza

    2010-09-01

    Many nations are indebted to Avicenna (Ibn-Sina) for their scientific progressions and civilization. Many countries in the Middle East, Africa, and Europe have honored Avicenna, the great Persian scientist, by depicting his vignette on their postage stamps. The symbolic value of Avicenna has been chosen to commemorate scientific occasions, achievements and anniversaries, which represents the ultimate performance of conscious honoring.

  3. 42 CFR 71.3 - Designation of yellow fever vaccination centers; Validation stamps.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Designation of yellow fever vaccination centers... Designation of yellow fever vaccination centers; Validation stamps. (a) Designation of yellow fever vaccination centers. (1) The Director is responsible for the designation of yellow fever vaccination centers...

  4. Studying the Solar System Can Be More than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-01-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

  5. Stamped coal cakes in cokemaking technology Part 1 - A parameter study on stampability

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the coke making plant using cost efficient raw materials, but oven throughput is also increased. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend depending on the stamping energy. The first part of this paper defines the overall process objectives and presents results from systematic investigations of the effects of several coal properties on the so called stampability as the integral model parameter for compacting. Surface moisture, coal granulometry and mechanical properties have significant influence on the densification. The incorporation of these parameters into the model allows the differentiated calculation of the cake density.

  6. Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

    NARCIS (Netherlands)

    Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

    2007-01-01

    The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

  7. Micropatterning of a stretchable conductive polymer using inkjet printing and agarose stamping

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; Hassager, Ole; Larsen, Niels Bent

    2007-01-01

    ,4-ethylenedioxythiophene) (PEDOT). The agarose stamping produced 50 μm wide conducting lines with high spatial fidelity. The deactivation agent was found to cause some degradation of the remaining conducting lines, as revealed by a stronger increase in resistance upon straining compared to the pristine polymer material...

  8. MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

    Science.gov (United States)

    Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

    2014-01-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

  9. Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

    Science.gov (United States)

    Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

    2013-12-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

  10. Behavioral Economics and Social Policy: Designing Innovative Solutions for Programs Supported by the Administration for Children and Families. OPRE Report No. 2014-16a

    Science.gov (United States)

    Richburg-Hayes, Lashawn; Anzelone, Caitlin; Dechausay, Nadine; Datta, Saugato; Fiorillo, Alexandra; Potok, Louis; Darling, Matthew; Balz, John

    2014-01-01

    The Behavioral Interventions to Advance Self-Sufficiency (BIAS) project is the first major opportunity to use a behavioral economics lens to look at programs that serve poor and vulnerable people in the United States. Sponsored by the Office of Planning, Research and Evaluation of the Administration for Children and Families (ACF) within the U.S.…

  11. Food Assistance Programs and Child Health

    Science.gov (United States)

    Gundersen, Craig

    2015-01-01

    Food assistance programs--including the Supplemental Nutrition Assistance Program (SNAP, or food stamps), the National School Lunch Program, and the School Breakfast Program--have been remarkably successful at their core mission: reducing food insecurity among low-income children. Moreover, writes Craig Gundersen, SNAP in particular has also been…

  12. Low-Cost Generic Program Use by Medicare Beneficiaries: Implications for Medication Exposure Misclassification in Administrative Claims Data.

    Science.gov (United States)

    Pauly, Nathan J; Talbert, Jeffery C; Brown, Joshua

    2016-06-01

    Administrative claims data are used for a wide variety of research and quality assurance purposes; however, they are prone to medication exposure misclassification if medications are purchased without using an insurance benefit. Low-cost generic drug programs (LCGPs) offered at major chain pharmacies are a relatively new and sparsely investigated source of exposure misclassification. LCGP medications are often purchased out of pocket; thus, a pharmacy claim may never be submitted, and the exposure may go unobserved in claims data. As heavy users of medications, Medicare beneficiaries have much to gain from the affordable medications offered through LCGPs. This use may put them at increased risk of exposure misclassification in claims data. Many high-risk medications (HRMs) and medications tracked for adherence and utilization quality metrics are available through LCGPs, and exposure misclassification of these medications may impact the quality assurance efforts reliant on administrative claims data. Presently, there is little information regarding the use of these programs among a geriatric population. To (a) quantify the prevalence of LCGP users in a nationally representative population of Medicare beneficiaries; (b) compare clinical and demographic characteristics of LCGP users and nonusers; (c) assess determinants of LCGP use and medications acquired through these programs; and (d) analyze patterns of LCGP use during the years 2007-2012. This study relied on data from the Medical Expenditure Panel Survey (MEPS) from 2007 to 2012. The first 3 objectives were completed with a cohort of individuals in the most recent MEPS panel, while the fourth objective was completed with a separate cohort composed of individuals who participated in MEPS from 2007 to 2012. Inclusion in either study cohort required that individuals were Medicare beneficiaries aged 65 years or greater, used at least 1 prescription drug during their 2-year panel period, and participated in all 5

  13. Nullius in verba: The University of Minnesota Social and Administrative Pharmacy Program proposed Guidelines for Formulary Evaluations

    Directory of Open Access Journals (Sweden)

    Paul C Langley

    2016-07-01

    Full Text Available The University of Minnesota Social and Administrative Pharmacy Program proposed Guidelines for Formulary Evaluations (GFE are designed to focus on the credibility of clinical and cost-outcomes claims in formulary decision making. The last few years have witnessed increasing concern over the credibility of trial based efficacy claims, with a surprisingly high proportion of claims falling short. At the same time cost-outcomes claims, where comparative clinical claims are a key input, have been presented where the claims made are not open to experimental or observational assessment. This follows from standards recommended for modeled and simulated claims. In the absence of cost-outcomes claims being presented in an evaluable form, it is impossible not only to replicate the claim or to judge whether or not it is credible. Claims for product value based on such claims are unacceptable. The guidelines proposed here are designed to overcome these limitations and support an evidence base that is both credible and replicable for formulary decisions. This is achieved by focusing on short-term modeled or simulated claims for cost-effectiveness. The requirement for modeled or simulated claims that are evaluable within a time frame that is meaningful for formulary decisions marks a major departure from format submissions already in play, not only in the US but in other developed economies. Rather than subscribing to the gold standard of long term or lifetime cost-per-QALY claims a short-term time horizon of no more than 2-years is recommended. This allows products to be provisionally placed on formulary but subject to a protocol that supports an evaluation to be reported back to a formulary committee as part of ongoing disease area or therapeutic class reviews. The place of the product and its contracted price can then be reviewed. Conflict of Interest None Type: Commentary

  14. Radioactive waste management: a summary of state laws and administration. National Low-Level Radioactive Waste Management Program. Revision 5

    International Nuclear Information System (INIS)

    1984-09-01

    This updated report covers the administration, the legislature and the laws in the 50 states related to radioactive waste. The report for each state is divided into four sections: Cover Page; Administrative; Legislative; and Applicable Legislation. In general, the information in this report is accurate as of 31 August 1984

  15. Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

    Science.gov (United States)

    Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

    2015-01-01

    Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

  16. 20 CFR 641.859 - What other special rules govern the classification of costs as administrative costs or program...

    Science.gov (United States)

    2010-04-01

    ... EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR PROVISIONS GOVERNING THE SENIOR COMMUNITY SERVICE... documented distributions of actual time worked or other equitable cost allocation methods. (d) Specific costs... information; (2) Employment statistics information, including job listing information, job skills information...

  17. Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

    International Nuclear Information System (INIS)

    Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

    2007-01-01

    It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

  18. Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

    International Nuclear Information System (INIS)

    Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

    2012-01-01

    We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

  19. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    Science.gov (United States)

    Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

    2016-08-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

  20. Combined Randomized-Local Hough Transform versus UpWrite Transform in stamp detection

    Directory of Open Access Journals (Sweden)

    Daniela Tondini

    2003-10-01

    Full Text Available The conventional Hough Transform used for detection of objects with known shape and size has proved its robustness. One typical task for this transform can be the detection of stamp(s on an envelope. Unfortunately, the Hough Transform has an important drawback: the heavy computational effort and, as consequence, a big execution time. This paper introduces a variant of Hough Transform that speeds up the process. One important aid is given by a filtering step based on a fast analysis of a rough deformation model. This method is a combination of Randomized and Local Hough Transform. Experiments were made comparing the modified Hough Transform approach with the UpWrite Transform and they proved that the first approach preserves the quality of the Hough Transform results at a higher speed.

  1. Influence of operating parameters on coke end temperature in stamp charged batteries

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, U.S.; Sarkar, P.; Deshpande, D.P. [Tata Steel, Jamshedpur (India)

    2004-07-01

    Coke end temperature (CET) indicates the final temperature of coke mass after pushing it out from the oven and before quenching and thus is an indicator of the preparedness of the coke. Analysis of plant data from stamp charged batteries at Tata Steel show that it depends on coal blend characteristics and battery conditions. Increased input coal ash, its crushing fineness and volatile matters increases but the moisture decreases it. The heating rate, battery and regenerator temperatures all increase the coke end temperature. The present paper documents that observations on parameters influencing coke end temperature under stamp charged conditions and attempts to hypothesise the possible explanation for the results obtained. 3 refs., 10 figs., 2 tabs.

  2. Mine safety and health administration's part 50 program does not fully capture chronic disease and injury in the Illinois mining industry.

    Science.gov (United States)

    Almberg, Kirsten S; Friedman, Lee S; Swedler, David; Cohen, Robert A

    2018-03-09

    The Mine Safety and Health Administration (MSHA) requires reporting of injuries and illnesses to their Part 50 program. A 2011 study indicated that the Part 50 program did not capture many cases of injury in Kentucky, causing concern about underreporting in other states. MSHA Part 50 reports from Illinois for 2001-2013 were linked to Illinois Workers' Compensation Commission (IWCC) data. IWCC cases not found in the Part 50 data were considered unreported. Overall, the Part 50 Program did not capture 66% of IWCC cases from 2001 to 2013. Chronic injuries or illnesses were more likely to be unreported to MSHA. The majority of occupational injuries and illnesses found in the IWCC from this time period, were not captured by Part 50. Inaccurate reporting of injuries and illnesses to the Part 50 program hinders MSHA's ability to enforce safety and health standards in the mining industry. © 2018 Wiley Periodicals, Inc.

  3. Modeling and Simulating Material Behavior during Hot Blank - Cold Die (HB-CD) Stamping of Aluminium Alloy Sheets

    Science.gov (United States)

    Zhang, Nan; Abu-Farha, Fadi

    2016-08-01

    Hot blank - cold die (HB-CD) stamping, non-isothermal hot stamping, of aluminium alloy sheets offers great opportunities for high production rates at low cost, while overcoming limited material formability issues. Yet developing an accurate model that can describe the complex material behavior over the wide ranging conditions of HB-CD stamping (temperatures ranging between 25 and 350 °C) is challenging. Moreover, validation of the developed models under transient conditions is problematic. This work presents he results of a comprehensive characterization, material modeling, FE simulation and experimental validation effort to capture the behavior of an aluminium alloy sheet during HB-CD stamping. In particular, we highlight the integration between temperature measurements (thermography) and strain measurements (digital image correlation) for the accurate validation of model predictions of non-isothermal material deformation.

  4. 75 FR 11913 - Chrysler, LLC; Warren Stamping Plant, Including On-Site Leased Workers From Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... firm. The workers produce stamping parts for automobiles. New information shows that workers leased... under the control of the subject firm to be considered leased workers. Based on these findings, the...

  5. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    International Nuclear Information System (INIS)

    Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-01-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

  6. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Energy Technology Data Exchange (ETDEWEB)

    Altun, Ali Ozhan [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Jeong, Jun-Ho [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Rha, Jong-Joo [Surface Technology Research Center, Korea Institute of Machinery and Materials, 66 Sangnam-Dong, Changwon-Shi, Kyungnam-Do (Korea, Republic of); Kim, Ki-Don [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Lee, Eung-Sug [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of)

    2007-11-21

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75{sup 0}. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  7. A rapid co-culture stamping device for studying intercellular communication

    OpenAIRE

    Amin Hassanzadeh-Barforoushi; Jonathan Shemesh; Nona Farbehi; Mohsen Asadnia; Guan Heng Yeoh; Richard P. Harvey; Robert E. Nordon; Majid Ebrahimi Warkiani

    2016-01-01

    Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two a...

  8. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method.

    Science.gov (United States)

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2013-03-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  9. Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses

    OpenAIRE

    Daehn, G. S.; Shang, J.; Vohnout, V. J.

    2004-01-01

    Stamping failures consist of, broadly speaking, either tearing (excessive local strain energy) or wrinkling (insufficient or inappropriate local strain energy). Good parts are produced when the strain energy or plastic work is effectively distributed during the forming process such that tears and wrinkles are eliminated. The process window framed by tearing and wrinkling limits can be rather small for some materials, notably aluminum alloys. At present, there are no established methods of dir...

  10. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method

    OpenAIRE

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2012-01-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  11. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    OpenAIRE

    Luan, X; Liu, X; Fang, H; Ji, K; El Fakir, O; Wang, L

    2016-01-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast ir...

  12. Anisotropic behaviour law for sheets used in stamping: A comparative study of steel and aluminium

    OpenAIRE

    Sinou, Jean-Jacques; Macquaire, Bruno

    2008-01-01

    International audience; For a car manufacturer, reducing the weight of vehicles is an obvious aim. Replacing steel by aluminium moves towards that goal. Unfortunately, aluminium's stamping numerical simulation results are not yet as reliable as those of steel. Punch-strength and spring-back phenomena are not correctly described. This study on aluminium validates the behaviour law Hill 48 quadratic yield criterion with both isotropic and kinematic hardening. It is based on the yield surface an...

  13. Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

    Directory of Open Access Journals (Sweden)

    Aizawa Tatsuhiko

    2016-01-01

    Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

  14. Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

    Science.gov (United States)

    Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

    2017-09-01

    The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

  15. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Science.gov (United States)

    Ozhan Altun, Ali; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-11-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70 86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75°. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  16. Validation of the stamping method for CaSO{sub 4}:RE + Teflon® pellets production

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br, E-mail: lcrodri@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    The IPEN method for the CaSO{sub 4}:RE + Teflon® production, developed and patented at the Dosimetric Materials Laboratory - LMD/IPEN in the earlier 1980's, is highly time-demanding, so that the use of the stamping method, already widely industrially applied, would enhance the CaSO{sub 4}:RE + Teflon® pellets production. Thus, validating the stamping method, by comparing the dosimetric properties of a batch of pellets produced by each method, became a must. The stamped batch presents the same mean non-irradiated signals either after sintering or annealing while IPEN batch mean non-irradiated signals vary in 23%. The mean TL signal after irradiation was about 50 nC, but the standard deviation varies from 20% to 33% for IPEN batch and keeps in 10% for the stamped batch. 24 h after the irradiation, the TL signal decreased to about 35 nC, with no differences in IPEN batch standard deviation and a decrease to 5% in stamped batch standard deviation, for the five performed essays. Calibration curves present a linear behavior over the entire studied dose range and the same coefficients for both methods, however, the uncertainties in the coefficients determined to the calibration curve obtained with stamped pellets are significantly smaller, leading to a more precise dose determination. This results show that the stamping method produces more homogeneous batches, with pellets that maintain the dosimetric characteristics of the detectors produced by IPEN method, in such a way that the stamping method can substitute with advantages the IPEN method in the CaSO{sub 4}:RE + Teflon® dosimetric pellets production. (author)

  17. Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel

    Science.gov (United States)

    Zhu, Bin; Liu, Zhuang; Wang, Yanan; Rolfe, Bernard; Wang, Liang; Zhang, Yisheng

    2018-04-01

    Application of quenching and partitioning process in hot stamping has proven to be an effective method to improve the plasticity of advanced high-strength steels (AHSSs). In this study, the hot stamping and partitioning process of advanced high-strength steel 30CrMnSi2Nb is investigated with a hot stamping mold. Given the specific partitioning time and temperature, the influence of quenching temperature on the volume fraction of microstructure evolution and mechanical properties of the above steel are studied in detail. In addition, a model for quenching and partitioning process is applied to predict the carbon diffusion and interface migration during partitioning, which determines the retained austenite volume fraction and final properties of the part. The predicted trends of the retained austenite volume fraction agree with the experimental results. In both cases, the volume fraction of retained austenite increases first and then decreases with the increasing quenching temperature. The optimal quenching temperature is approximately 290 °C for 30CrMnSi2Nb with the partition conditions of 425 °C and 20 seconds. It is suggested that the model can be used to help determine the process parameters to obtain retained austenite as much as possible.

  18. Fabrication of 3D high aspect ratio PDMS microfluidic networks with a hybrid stamp.

    Science.gov (United States)

    Kung, Yu-Chun; Huang, Kuo-Wei; Fan, Yu-Jui; Chiou, Pei-Yu

    2015-04-21

    We report a novel methodology for fabricating large-area, multilayer, thin-film, high aspect ratio, 3D microfluidic structures with through-layer vias and open channels that can be bonded between hard substrates. It is realized by utilizing a hybrid stamp with a thin plastic sheet embedded underneath a PDMS surface. This hybrid stamp solves an important edge protrusion issue during PDMS molding while maintaining necessary stamp elasticity to ensure the removal of PDMS residues at through-layer regions. Removing edge protrusion is a significant progress toward fabricating 3D structures since high aspect ratio PDMS structures with flat interfaces can be realized to facilitate multilayer stacking and bonding to hard substrates. Our method also allows for the fabrication of 3D deformable channels, which can lead to profound applications in electrokinetics, optofluidics, inertial microfluidics, and other fields where the shape of the channel cross section plays a key role in device physics. To demonstrate, as an example, we have fabricated a microfluidic channel by sandwiching two 20 μm wide, 80 μm tall PDMS membranes between two featureless ITO glass substrates. By applying electrical bias to the two ITO substrates and pressure to deform the thin membrane sidewalls, strong electric field enhancement can be generated in the center of a channel to enable 3D sheathless dielectrophoretic focusing of biological objects including mammalian cells and bacteria at a flow speed up to 14 cm s(-1).

  19. Prevention of crack in stretch flanging process using hot stamping technique

    Science.gov (United States)

    Syafiq, Y. Mohd; Hamedon, Z.; Azila Aziz, Wan; Razlan Yusoff, Ahmad

    2017-10-01

    Demand for enhancing of passenger safety as well as weight reduction of automobiles has increased the use of high strength steel sheets. As a sheet metal is a lightweight having high strength is suitable for producing automotive parts such as white body panel. The stretch flanging of the high strength steel sheet is a problem due to high springback and easy to crack. This study uses three methods to stretch flange the sheets; using lubricants, shear-edge polishing and hot stamping. The effectiveness of these methods will be measured by comparing the flange length of each methods can achieved. For stretch flange with lubricant and polished sheared edge, the flange length failed to achieve the target 15 mm while hot stamping improved the formability of the sheet and preventing the occurrence of the springback and crack. Hot stamping not only improved formability of the sheet but also transformed the microstructure into martensite thus improve the hardness and the strength of the sheet after been quenched with the dies.

  20. Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

    Directory of Open Access Journals (Sweden)

    M. Kumar

    2017-01-01

    Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

  1. Conformal contact and pattern stability of stamps used for soft lithography

    Science.gov (United States)

    Bietsch, Alexander; Michel, Bruno

    2000-10-01

    Patterning in soft lithography techniques such as microcontact printing or light-coupling mask lithography is mediated by surface topographical patterns of elastomeric stamps: intimate contact with the substrate is achieved locally at the protruding areas, whereas a gap remains between the substrate and recessed zones. This principle challenges the properties of the stamp, especially when printing high-resolution or extreme aspect-ratio patterns with high accuracy. On the one hand, the stamp must be soft enough to enable conformal contact with the substrate, which means that it must adapt elastically without leaving voids created by the natural roughness of the substrate. On the other hand, a precise definition of micropatterns requires a rigid material. In this article, we analyze the conditions of elasticity, roughness, and energy of adhesion to establish conformal contact between an elastomer and the target surface. Furthermore, we address questions of replication accuracy and evaluate local elastic deformation induced by normal forces using model calculations for simple pattern geometries. Pressure applied during contact leads to a sagging or collapse of the unsupported areas. We discuss implications on both material and pattern design that allow spontaneous propagation of conformal contact while inhibiting the spreading of collapse.

  2. On the die face design for stamping an automotive engine hood

    Science.gov (United States)

    Chen, Ming-Zhi; Wang, Shi-Wei; Lin, Ching-I.; Chen, Fuh-Kuo

    2017-09-01

    Since the engine hood is mainly manufactured in the drawing operation, the die addendum design is the key to the success of manufacturing a defect free product. In this study, the existing die addendum designs corresponding to those engine hoods were reviewed and the design parameters were constructed. The preliminary study was then performed to examine the influences of the stamping die angle, binder surface shape, and die open line shape on the defects occurred in the part. Based on the simulation results, the optimum design for the die addendum face was then investigated and a systematic design guideline was proposed. In order to validate the proposed design guideline, actual engine hoods were stamped according to the finite element analysis and the production part shapes, thickness distributions, and the stretch at the central region were compared with those obtained from the finite element simulations. The consistent agreement between the product parts and the simulation results confirms the validity of the design guideline proposed in the present study for stamping an engine hood.

  3. Evaluation of resistless Ga+ beam lithography for UV NIL stamp fabrication

    Science.gov (United States)

    Rumler, M.; Fader, R.; Haas, A.; Rommel, M.; Bauer, A. J.; Frey, L.

    2013-09-01

    This paper presents an alternative rapid prototyping approach for the fabrication of stamps for UV nanoimprint lithography. In this process, areas implanted with gallium serve as an etch mask for the dry etching of quartz. The implantation is performed using a focused ion beam system. To avoid charging of the quartz substrate the use of thin layers of chromium or carbon on the quartz substrate has been evaluated. The resulting quartz structures exhibit very smooth surfaces after dry etching, if the implantation dose is high enough to form a stable etch mask. Furthermore, anisotropic etching could be realized by optimization of a quartz etching process involving C4F8 and O2 after the use of resistless Ga+ beam lithography. Finally, imprints into a UV curing resist are performed successfully with the manufactured stamps, proving that the presence of Ga rich areas on the stamp is not detrimental to the curing of the resist or the functionality of the anti-sticking layer.

  4. Radioactive waste management: a summary of state laws and administration. National Low-Level Radioactive Waste Mangement Program

    International Nuclear Information System (INIS)

    1983-05-01

    This is the first quarterly update of Radioactive Waste Management: A Summary of State Laws and Administration. Because states have been very active on waste management issues, the whole report is being reissued in this update. It covers the administration, the legislature and the laws in the 50 states related to radioactive waste. The report for each state is divided into four sections: Cover Page; Administrative; Legislative; and Applicable Legislation. The cover page indicates whether or not it is an Agreement State, the low-level waste compacts in which the state is listed as an eligible state, and the high-level waste repository site screening regions in which the state or a portion of it is located. The administrative section provides information on the governor, lead agencies, other involved administrative agencies, relevant commissions, boards and councils and various contacts. The Legislative section provides general information on the legislature and lists legislative leaders, the relevant committees and their chairs and a legislative contact. In the section covering Applicable Legislation, laws related to radiation protection, low-level waste and high-level waste have been summarized. Hazardous waste siting laws are included for states that do not have a siting law covering radioactive waste. The section also contains summaries of relevant bills introduced in 1982 and 1983 legislative sessions and their disposition. In general, the information in this report is accurate as of 15 April 1983

  5. Development of an administrative system for an integral program of safety and occupational hygiene; Desarrollo de un sistema administrativo para un programa integral de seguridad e higiene ocupacional

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez R, J

    2004-07-01

    The objective of the present investigation thesis will be to provide a clear application of the basic elements of the administration for the elaboration of an integral program of security and occupational hygiene that serves like guide for the creation of new programs and of an internal integral regulation, in the matter. For the above mentioned the present work of thesis investigation besides applying those basic elements of the integral administration will be given execution to the normative one effective as well as the up-to-date concepts of security and hygiene for that the present thesis will be based on these premises that guided us for the elaboration of the program of security and occupational hygiene and that it will serve like base to be applied in all the areas of the National Institute of Nuclear Research and in special in those that are certifying for the system of administration of quality ISO 9001:2000 that with their implantation the objectives were reached that the Institute it has been traced in their general politics. It is necessary to make mention that the Institute has a primordial activity that is the one of to make Research and Development in nuclear matter for the peaceful uses of the nuclear energy, for that that with a strong support of the conventional areas of the type industrial the institutional objectives are achieved, for what is in these areas where the present thesis investigation is developed, without stopping to revise and to apply the nuclear normativity. (Author)

  6. The National Aeronautics and Space Administration-U.S. Public Health Service Health Evaluation and Enhancement Program - Summary of results.

    Science.gov (United States)

    Durbeck, D. C.; Heinzelmann, F.; Schacter, J.; Haskell, W. L.; Payne, G. H.; Moxley, R. T., III; Nemiroff, M.; Limoncelli, D. D.; Arnoldi, L. B.; Fox, S. M., III

    1972-01-01

    An exercise program was initiated in a federal agency to assess the feasibility of such a program, and to identify the factors that influenced joining, adherence to, and effectiveness of the program. The program was utilized by 237 of the 998 eligible federal employees; mean attendance rate was 1.3 days/week. Those who volunteered perceived a need for increased physical activity, believed they had sufficient time to participate and derived subjective as well as objective benefits. Significant improvements were found in heart rate response to the standard exercise test, body weight, skinfold measurements and triglyceride levels.

  7. Awareness of the Food and Drug Administration's Bad Ad Program and Education Regarding Pharmaceutical Advertising: A National Survey of Prescribers in Ambulatory Care Settings.

    Science.gov (United States)

    O'Donoghue, Amie C; Boudewyns, Vanessa; Aikin, Kathryn J; Geisen, Emily; Betts, Kevin R; Southwell, Brian G

    2015-01-01

    The U.S. Food and Drug Administration's Bad Ad program educates health care professionals about false or misleading advertising and marketing and provides a pathway to report suspect materials. To assess familiarity with this program and the extent of training about pharmaceutical marketing, a sample of 2,008 health care professionals, weighted to be nationally representative, responded to an online survey. Approximately equal numbers of primary care physicians, specialists, physician assistants, and nurse practitioners answered questions concerning Bad Ad program awareness and its usefulness, as well as their likelihood of reporting false or misleading advertising, confidence in identifying such advertising, and training about pharmaceutical marketing. Results showed that fewer than a quarter reported any awareness of the Bad Ad program. Nonetheless, a substantial percentage (43%) thought it seemed useful and 50% reported being at least somewhat likely to report false or misleading advertising in the future. Nurse practitioners and physician assistants expressed more openness to the program and reported receiving more training about pharmaceutical marketing. Bad Ad program awareness is low, but opportunity exists to solicit assistance from health care professionals and to help health care professionals recognize false and misleading advertising. Nurse practitioners and physician assistants are perhaps the most likely contributors to the program.

  8. Environmental statement for National Aeronautics and Space Administration, Office of Space Science, launch vehicle and propulsion programs

    Science.gov (United States)

    1972-01-01

    NASA OSS Launch Vehicle and Propulsion Programs are responsible for the launch of approximately 20 automated science and applications spacecraft per year. These launches are for NASA programs and those of other U. S. government agencies, private organizations, such as the Comsat Corporation, foreign countries, and international organizations. Launches occur from Cape Kennedy, Florida; Vandenberg Air Force Base, California; Wallops Island, Virginia; and the San Marco Platform in the Indian Ocean off Kenya. Spacecraft launched by this program contribute in a variety of ways to the control of and betterment of the environment. Environmental effects caused by the launch vehicles are limited in extent, duration, and intensity and are considered insignificant.

  9. The use of a knowledge translation program to increase use of standardized outcome measures in an outpatient pediatric physical therapy clinic: administrative case report.

    Science.gov (United States)

    Schreiber, Joseph; Marchetti, Gregory F; Racicot, Brook; Kaminski, Ellen

    2015-04-01

    Pediatric physical therapists face many challenges related to the application of research evidence to clinical practice. A multicomponent knowledge translation (KT) program may be an effective strategy to support practice change. The purpose of this case report is to describe the use of a KT program to improve the knowledge and frequency of use of standardized outcome measures by pediatric physical therapists practicing in an outpatient clinic. This program occurred at a pediatric outpatient facility with 1 primary clinic and 3 additional satellite clinics, and a total of 17 physical therapists. The initial underlying problem was inconsistency across staff recommendations for frequency and duration of physical therapist services. Formal and informal discussion with the department administrator and staff identified a need for increased use of standardized outcome measures to inform these decisions. The KT program to address this need spanned 6 months and included identification of barriers, the use of a knowledge broker, multiple workshop and practice sessions, online and hard-copy resources, and ongoing evaluation of the KT program with dissemination of results to staff. Outcome measures included pre- and post-knowledge assessment and self-report surveys and chart review data on use of outcome measures. Participants (N=17) gained knowledge and increased the frequency of use of standardized outcome measures based on data from self-report surveys, a knowledge assessment, and chart reviews. Administrators and others interested in supporting practice change in physical therapy may consider implementing a systematic KT program that includes a knowledge broker, ongoing engagement with staff, and a variety of accessible resources. © 2015 American Physical Therapy Association.

  10. A Reference-Intensive Embedded Librarian Program: Kresge Business Administration Library's Program to Support Action-Based Learning at the Ross School of Business

    Science.gov (United States)

    Berdish, Laura; Seeman, Corey

    2010-01-01

    While a great deal of literature on embedded librarians in academic libraries is focused on the role of instructor, there are many other services that could be provided by librarians working closely with students. The Kresge Business Administration Library (Stephen M. Ross School of Business at the University of Michigan) has created a unique…

  11. Radioactive waste management: a summary of state laws and administration. National Low-Level Radioactive Waste Management Program. Revision 6

    International Nuclear Information System (INIS)

    1985-12-01

    This is the sixth update of ''Radioactive Waste Management: A Summary of State Laws and Administration.'' It completely replaces the fifth update (15 September 1984). The updated report covers low-level radioactive waste compacts, and the administration, the legislature and the laws related to radioactive waste management in each of the fifty states. The report is organized by low-level waste compact regions. Each section begins with a description of the low-level waste compact, followed by reports on each state within the region. There are also sections for states which have made plans to dispose of waste independently of a compact, and for those states which have not yet declared their intentions. The report on each compact is divided into four sections: Cover Page, Chair Organization, State Delegations, and Compact

  12. Molecular dynamics study on the effects of stamp shape, adhesive energy, and temperature on the nanoimprint lithography process

    International Nuclear Information System (INIS)

    Kang, Ji-Hoon; Kim, Kwang-Seop; Kim, Kyung-Woong

    2010-01-01

    Molecular dynamics simulations of nanoimprint lithography (NIL) were performed to investigate the effects of three critical process parameters in NIL: stamp shape, adhesive energy between the stamp and polymer film, and imprint temperature. The proposed simulation model of the NIL process consists of an amorphous SiO 2 stamp with a line pattern, an amorphous poly(methylmethacrylate) film, and a Si substrate under the periodic boundary condition in the horizontal direction to simulate a real NIL process imprinting periodical line patterns. The behavior of polymer deformation and the effects of adhesion on pattern transfer were investigated by observing the deformation process, calculating the imprint and separation forces, and analyzing the density and stress distribution inside the polymer film. In addition, their dependency on the process parameters is also discussed with reference to the changes in pattern shape, adhesive energy between the stamp and polymer atoms, and imprint temperature of the polymer film. During the imprint process, the rectangular pattern shows inferior cavity filling and higher stress concentration compared to trapezoidal and triangular patterns because it requires much larger flow and deformation of the polymer film. Low imprint temperature also produces high stress concentration and large imprint force due to the lower fluidity of polymer film. In the separation process, the rectangular pattern generates the largest separation force and causes the most serious defects of the transferred pattern and even the polymer film, while the triangular pattern shows the most satisfactory pattern transfer. In addition, the adhesive energy between the stamp and the polymer film also strongly influences the adhesion between the stamp and the polymer film. Low adhesive energy reduces the separation force of the stamp and transferred pattern defects, and therefore enhances the quality of pattern transfer.

  13. Rubber stamp templates for improving clinical documentation: A paper-based, m-Health approach for quality improvement in low-resource settings.

    Science.gov (United States)

    Kleczka, Bernadette; Musiega, Anita; Rabut, Grace; Wekesa, Phoebe; Mwaniki, Paul; Marx, Michael; Kumar, Pratap

    2018-06-01

    The United Nations' Sustainable Development Goal #3.8 targets 'access to quality essential healthcare services'. Clinical practice guidelines are an important tool for ensuring quality of clinical care, but many challenges prevent their use in low-resource settings. Monitoring the use of guidelines relies on cumbersome clinical audits of paper records, and electronic systems face financial and other limitations. Here we describe a unique approach to generating digital data from paper using guideline-based templates, rubber stamps and mobile phones. The Guidelines Adherence in Slums Project targeted ten private sector primary healthcare clinics serving informal settlements in Nairobi, Kenya. Each clinic was provided with rubber stamp templates to support documentation and management of commonly encountered outpatient conditions. Participatory design methods were used to customize templates to the workflows and infrastructure of each clinic. Rubber stamps were used to print templates into paper charts, providing clinicians with checklists for use during consultations. Templates used bubble format data entry, which could be digitized from images taken on mobile phones. Besides rubber stamp templates, the intervention included booklets of guideline compilations, one Android phone for digitizing images of templates, and one data feedback/continuing medical education session per clinic each month. In this paper we focus on the effect of the intervention on documentation of three non-communicable diseases in one clinic. Seventy charts of patients enrolled in the chronic disease program (hypertension/diabetes, n=867; chronic respiratory diseases, n=223) at one of the ten intervention clinics were sampled. Documentation of each individual patient encounter in the pre-intervention (January-March 2016) and post-intervention period (May-July) was scored for information in four dimensions - general data, patient assessment, testing, and management. Control criteria included

  14. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) summer faculty fellowship program, 1986, volume 2

    Science.gov (United States)

    Mcinnis, Bayliss (Editor); Goldstein, Stanley (Editor)

    1987-01-01

    The Johnson Space Center (JSC) NASA/ASEE Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The ten week program was operated under the auspices of the American Society for Engineering Education (ASEE). The basic objectives of the program are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers. Each faculty fellow spent ten weeks at JSC engaged in a research project commensurate with his interests and background and worked in collaboration with a NASA/JSC colleague. The final reports on the research projects are presented. This volume, 2, contains sections 15 through 30.

  15. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) summer faculty fellowship program, 1986, volume 1

    Science.gov (United States)

    Mcinnis, Bayliss (Editor); Goldstein, Stanley (Editor)

    1987-01-01

    The Johnson Space Center (JSC) NASA/ASEE Summer Faculty Fellowship Program was conducted by the University of Houston. The basic objectives of the program are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching objectives of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers. Each faculty fellow spent ten weeks at JSC engaged in a research project commensurate with his interests and background and worked in collaboration with a NASA/JSC colleague. Volume 1 contains sections 1 through 14.

  16. 78 FR 23769 - Notice of Final Issuance on the Adoption of Administration for Native Americans (ANA) Program...

    Science.gov (United States)

    2013-04-22

    ... policy and program clarifications, modifications, and activities for the fiscal year (FY) 2013 FOAs. The... and to minimize disruptions in the continuity of operations. The commenter stated that this policy..., members of governing bodies, and others who may be involved in grant- supported activities, from using...

  17. Ranking Journalism and Mass Communications Programs: Administrators and Faculty Approve of the Idea and Assess Potential Criteria

    Science.gov (United States)

    Weber, Joseph

    2017-01-01

    Rankings of universities and colleges are common and controversial. However, few rankers produce useful lists that assess and compare journalism and mass communications programs. The few currently available involve superficial reputational surveys or are less than transparent about their methodology. To determine potential criteria for a useful…

  18. 2005 Mississippi Curriculum Framework: Secondary Hotel, Restaurant, and Tourism Management. (Program CIP: 52.0901--Hospitality Administration/Management)

    Science.gov (United States)

    Bruce, Lady Anne; Chandler, Mark; Nichols, Raynette; Nevill, Becky

    2005-01-01

    Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

  19. SINCERITIES: Inferring gene regulatory networks from time-stamped single cell transcriptional expression profiles.

    Science.gov (United States)

    Papili Gao, Nan; Ud-Dean, S M Minhaz; Gandrillon, Olivier; Gunawan, Rudiyanto

    2017-09-14

    Single cell transcriptional profiling opens up a new avenue in studying the functional role of cell-to-cell variability in physiological processes. The analysis of single cell expression profiles creates new challenges due to the distributive nature of the data and the stochastic dynamics of gene transcription process. The reconstruction of gene regulatory networks (GRNs) using single cell transcriptional profiles is particularly challenging, especially when directed gene-gene relationships are desired. We developed SINCERITIES (SINgle CEll Regularized Inference using TIme-stamped Expression profileS) for the inference of GRNs from single cell transcriptional profiles. We focused on time-stamped cross-sectional expression data, commonly generated from transcriptional profiling of single cells collected at multiple time points after cell stimulation. SINCERITIES recovers directed regulatory relationships among genes by employing regularized linear regression (ridge regression), using temporal changes in the distributions of gene expressions. Meanwhile, the modes of the gene regulations (activation and repression) come from partial correlation analyses between pairs of genes. We demonstrated the efficacy of SINCERITIES in inferring GRNs using in silico time-stamped single cell expression data and single cell transcriptional profiles of THP-1 monocytic human leukemia cells. The case studies showed that SINCERITIES could provide accurate GRN predictions, significantly better than other GRN inference algorithms such as TSNI, GENIE3 and JUMP3. Moreover, SINCERITIES has a low computational complexity and is amenable to problems of extremely large dimensionality. Finally, an application of SINCERITIES to single cell expression data of T2EC chicken erythrocytes pointed to BATF as a candidate novel regulator of erythroid development. The MATLAB and R version of SINCERITIES is freely available from the following websites: http://www.cabsel.ethz.ch/tools/sincerities.html and

  20. Studying the Solar System Can Be More Than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-04-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly could consist mostly of showing images and reporting facts, but by using observations that can be made from images and also data and other known facts about the objects, instruction on solar system topics can be more conceptual, involving just as much inquiry and discovery as any area of astronomy or physics.

  1. Analysis of the Phenomenon of Speculative Trading in One of its Basic Manifestations:. Postage Stamp Bubbles

    Science.gov (United States)

    Roehner, B.; Sornette, D.

    We document and analyze the empirical facts concerning one of the clearest evidence of speculation in financial trading as observed in the postage collection stamp market. We unravel some of the mechanisms of speculative behavior which emphasize the role of fancy and collective behavior. In our conclusion, we propose a classification of speculative markets based on two parameters, namely the amplitude of the price peak and a second parameter that measures its "sharpness". This study is offered to anchor modeling efforts to realistic market constraints and observations.

  2. Time stamp generation with inverse FIR filters for Positron Emission Tomography

    International Nuclear Information System (INIS)

    Namias, Mauro

    2009-01-01

    Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

  3. Use of atomic force microscopy in the forensic application of chronological order of toners and stamping inks in questioned documents.

    Science.gov (United States)

    Kang, Tae-Yi; Lee, Joong; Park, Byung-Wook

    2016-04-01

    This paper describes the application of the atomic force microscopy (AFM) as a nano-indentation method and introduces a new method of identifying the chronological order of the application of the toner and stamping ink on the surface of documents by removing either of them. Various toners were used as samples for the AFM nano-indentation method. The chronological order of the application of the toner and stamping ink with either the toner placed over the stamping ink or the stamping ink placed over the toner, could be identified, regardless of the kinds of toners made by various companies. This paper provides the new approach for physically removing the toner and checking the material below it to identify questioned documents, which allows the method to be used to appraise documents forensically. Blind testing has shown that the method to analyze the chronological order of toner-printed documents and the seal stamping on them could accurately identify the order in all samples, while minimizing damage to the samples. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  4. Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

    International Nuclear Information System (INIS)

    Park, Jongho; Kim, Beomjoon

    2016-01-01

    Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

  5. Evaluation of the 1997 Joint National Conference, Women in Engineering Program Advocates Network (WEPAN) and National Association of Minority Engineering Program Administrators (NAMEPA)

    Energy Technology Data Exchange (ETDEWEB)

    Brainard, Suzanne G.

    1997-07-01

    The primary goal of the 1997 Joint National Conference was to unite NAMEPA and WEPAN in a unique collaborative effort to further the cause of increasing the participation of women and minorities in science and engineering. The specific objectives were to: (1) conduct technical and programmatic seminars for institutions desiring to initiate, replicate, or expand women and minorities in engineering program; (2) provide assistance in fundraising and grant writing; (3) profile women in engineering programs of excellence; (4) sponsor inspiring knowledgeable and motivational keynote speakers; and (5) offer a series of workshops focused on a multitude of topics.

  6. Why do low-income women not use food stamps? Findings from the California Women's Health Survey.

    Science.gov (United States)

    Kaiser, Lucia

    2008-12-01

    To determine factors associated with Food Stamp Program (FSP) participation in a potentially eligible California population. The California Women's Health Survey is an on-going annual telephone survey that collects data about health-related attitudes and behaviours from a randomly selected sample of women. Statistical procedures included chi2 and logistic regression. California, USA, from 2002 to 2004. A total of 527 FSP female participants and 1405 potentially eligible non-participant females, aged 18 years and older. The following characteristics remained independently and positively related to FSP participation: single mother with children; unemployed; on welfare; on WIC (the Special Supplemental Nutrition Program for Women, Infants, and Children); and US-born. Women under 25 years and those over 54 years were less likely to participate than women aged 25-54 years. Hispanic/Latino ethnicity was also negatively related to participation. Over 42 % of potentially eligible non-participants cited 'don't need them' as the reason for not applying for FSP, but 34.9 % either do not think they are eligible or do not know how to apply. Potentially eligible non-participants who cite 'don't need them' as a reason for not applying are less likely to be food insecure, to have inadequate income and to use alternative emergency aid, compared to women citing all other reasons. The highest level of need is among those who cite worry about citizenship or stigma as reasons for not applying. Strategies to increase participation in FSP should incorporate messages that change the public's perception of the programme, in addition to simplifying the application process, raising awareness of eligibility criteria and improving customer service.

  7. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1998. Volume 1

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Sickorez, Donn G. (Editor)

    1999-01-01

    JSC NASA/ASEE Summer Faculty Fellowship Program was conducted by the University of Houston and JSC, under ASEE. The objectives of the program are to further the professional knowledge of qualified engineering and science members; stimulate an exchange of ideas between participants and NASA; enrich and refresh the research and teaching activities of participants; and contribute to the research objectives of the NASA Centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project commensurate with his/her interests and background and worked in collaboration with a NASA/JSC colleague. This document is a compilation of the final reports on the fellows' research projects performed during the summer of 1998. Volume 1, current volume, contains the first reports, and volume 2 contains the remaining reports.

  8. National Aeronautics and Space Administration (NASA) /American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program. Volume 1

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Sickorez, Donn G. (Editor)

    1997-01-01

    The 1996 JSC NASA/ASEE Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The objectives of the program, which began nationally in 1964 and at JSC in 1965 are to (1) further the professional knowledge qualified engineering and science faculty members, (2) stimulate an exchange of ideas between participants and NASA, (3) refresh the research and teaching activities of participants' institutions, and (4) contribute to the research objectives of the NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA JSC colleague. This document is a compilation of the final reports on the research projects completed by the faculty fellows during the summer of 1996.

  9. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1993, volume 1

    Science.gov (United States)

    Hyman, William A. (Editor); Goldstein, Stanley H. (Editor)

    1993-01-01

    The JSC NASA/ASEE Summer Faculty Fellowship Program was conducted by Texas A&M University and JSC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are as follows: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA/JSC colleague. This document is a compilation of the final reports on the research projects completed by the faculty fellows during the summer of 1993.

  10. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1993, volume 2

    Science.gov (United States)

    Hyman, William A. (Editor); Goldstein, Stanley H. (Editor)

    1993-01-01

    The JSC NASA/ASEE Summer Faculty Fellowship Program was conducted by Texas A&M University and JSC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participant's institutions; and (4) to contribute to the research objectives of the NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA/JSC colleague. A compilation of the final reports on the research projects completed by the faculty fellows during the summer of 1993 is presented.

  11. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1994, volume 1

    Science.gov (United States)

    Bannerot, Richard; Sickorez, Donn G.

    1995-01-01

    The JSC NASA/ASEE Summer Faculty Fellowship Program was conducted by Texas A&M University and JSC. The objectives of the program, which began nationally in 1964 and at JSC in 1965 are to: (1) further the professional knowledge of qualified engineering and science faculty members, (2) stimulate an exchange of ideas between participants and NASA, (3) enrich and refresh the research and teaching activities of participants' institutions, and (4) contribute to the research objectives of the NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA JSC colleague. This document is a compilation of the final reports on the research projects completed by the faculty fellows during the summer of 1994.

  12. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program: 1996. Volume 2

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Sickorez, Donn G. (Editor)

    1997-01-01

    The objectives of the program, which began nationally in 1964 and at JSC in 1965 are to (1) further the professional knowledge qualified engineering and science faculty members, (2) stimulate an exchange of ideas between participants and NASA, (3) and refresh the research and teaching activities of participants' institutions, and (4) contribute to the research objectives of NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA JSC colleague.

  13. The Teaching of Ethics in Advertising Curricula: An Analysis of ACEJMC Accredited and Non-Accredited Programs and Programs in Business Administration.

    Science.gov (United States)

    Ardoin, Birthney

    A survey was taken to find answers to questions being asked by the Accrediting Council on Education in Journalism and Mass Communication (ACEJMC) about the teaching of ethics. A questionnaire was mailed to the 90 advertising programs listed in the 1983 edition of "Where Shall I Go to College to Study Advertising?" to determine where ethics was…

  14. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program: 1995.. Volume 2

    Science.gov (United States)

    Hyman, William A. (Editor); Sickorez, Donn G. (Editor)

    1996-01-01

    The JSC NASA/ASEE Summer Faculty Fellowship Program was conducted at JSC, including the White Sands Test Facility, by Texas A&M University and JSC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of the participants' institutions; and (4) to contribute to the research objectives of the NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA/JSC colleague. In addition to the faculty participants, the 1995 program included five students. This document is a compilation of the final reports on the research projects completed by the faculty fellows and visiting students during the summer of 1995. The reports of two of the students are integral with that of the respective fellow. Three students wrote separate reports.

  15. US Department of Energy Office of Inspector General report on audit of program administration by the Office of Energy Research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-02

    The objective of the audit was to determine whether Energy Research had established performance expectations, including performance criteria and metrics, and used these expectations to monitor progress for basic and applied research performed at the Department`s national laboratories. Congressional and Departmental initiatives envision improved contract and program performance by requiring program managers to set measurable performance expectations. Even though research outcomes are inherently unpredictable, performance expectations can and should be established for scopes of work, milestones, resource limits and deliverables. However, Energy Research generally did not clearly specify--at either an aggregated program or individual task level--such expectations for research at the Department`s national laboratories. While information was available in the contractor`s research proposals, Energy Research essentially relied on the contractors to initiate and execute the research without agreement on expectations. This practice provided the Department with little basis to measure and evaluate contractor performance. Energy Research agreed in part with the finding and will take action on the recommendations in the report.

  16. What Is Needed to Eradicate Lymphatic Filariasis? A Model-Based Assessment on the Impact of Scaling Up Mass Drug Administration Programs.

    Directory of Open Access Journals (Sweden)

    Randee J Kastner

    Full Text Available Lymphatic filariasis (LF is a neglected tropical disease for which more than a billion people in 73 countries are thought to be at-risk. At a global level, the efforts against LF are designed as an elimination program. However, current efforts appear to aim for elimination in some but not all endemic areas. With the 2020 goal of elimination looming, we set out to develop plausible scale-up scenarios to reach global elimination and eradication. We predict the duration of mass drug administration (MDA necessary to reach local elimination for a variety of transmission archetypes using an existing model of LF transmission, estimate the number of treatments required for each scenario, and consider implications of rapid scale-up.We have defined four scenarios that differ in their geographic coverage and rate of scale-up. For each scenario, country-specific simulations and calculations were performed that took into account the pre-intervention transmission intensity, the different vector genera, drug regimen, achieved level of population coverage, previous progress toward elimination, and potential programmatic delays due to mapping, operations, and administration.Our results indicate that eliminating LF by 2020 is unlikely. If MDA programs are drastically scaled up and expanded, the final round of MDA for LF eradication could be delivered in 2028 after 4,159 million treatments. However, if the current rate of scale-up is maintained, the final round of MDA to eradicate LF may not occur until 2050.Rapid scale-up of MDA will decrease the amount of time and treatments required to reach LF eradication. It may also propel the program towards success, as the risk of failure is likely to increase with extended program duration.

  17. The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

    Directory of Open Access Journals (Sweden)

    Kaadyr-ool A. Bicheldey

    2016-09-01

    Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

  18. Industry assessment of human factors in aviation maintenance and inspection research program : an assessment of industry awareness and use of the Federal Aviation Administration Office of Aviation Medicine Human Factors in Aviation Maintenance and Inspect

    Science.gov (United States)

    1998-03-01

    Ten years ago the Federal Aviation Administration (FAA) Office of Aviation Medicine embarked on a research and development program dedicated to human factors in aviation maintenance and inspection. Since 1989 FAA has invested over $12M in maintenance...

  19. The Federal Aviation Administration/Massachusetts Institute of Technology (FAA/MIT) Lincoln Laboratory Doppler weather radar program

    Science.gov (United States)

    Evans, James E.

    1988-01-01

    The program focuses on providing real-time information on hazardous aviation weather to end users such as air traffic control and pilots. Existing systems will soon be replaced by a Next Generation Weather Radar (NEXRAD), which will be concerned with detecting such hazards as heavy rain and hail, turbulence, low-altitude wind shear, and mesocyclones and tornadoes. Other systems in process are the Central Weather Processor (CWP), and the terminal Doppler weather radar (TDWR). Weather measurements near Memphis are central to ongoing work, especially in the area of microbursts and wind shear.

  20. Impact of a chronic disease self-management program on health care utilization in rural communities: a retrospective cohort study using linked administrative data.

    Science.gov (United States)

    Jaglal, Susan B; Guilcher, Sara J T; Hawker, Gillian; Lou, Wendy; Salbach, Nancy M; Manno, Michael; Zwarenstein, Merrick

    2014-05-01

    Internationally, chronic disease self-management programs (CDSMPs) have been widely promoted with the assumption that confident, knowledgeable patients practicing self-management behavior will experience improved health and utilize fewer healthcare resources. However, there is a paucity of published data supporting this claim and the majority of the evidence is based on self-report. We used a retrospective cohort study using linked administrative health data. Data from 104 tele-CDSMP participants from 13 rural and remote communities in the province of Ontario, Canada were linked to administrative databases containing emergency department (ED) and physician visits and hospitalizations. Patterns of health care utilization prior to and after participation in the tele-CDSMP were compared. Poisson Generalized Estimating Equations regression was used to examine the impact of the tele-CDSMP on health care utilization after adjusting for covariates. There were no differences in patterns of health care utilization before and after participating in the tele-CDSMP. Among participants ≤ 66 years, however, there was a 34% increase in physician visits in the 12 months following the program (OR = 1.34, 95% CI 1.11-1.61) and a trend for decreased ED visits in those >66 years (OR = 0.59, 95% CI 0.33-1.06). This is the first study to examine health care use following participation in the CDSMP in a Canadian population and to use administrative data to measure health care utilization. Similar to other studies that used self-report measures to evaluate health care use we found no differences in health care utilization before and after participation in the CDSMP. Future research needs to confirm our findings and examine the impact of the CDSMP on health care utilization in different age groups to help to determine whether these interventions are more effective with select population groups.

  1. New method for springback compensation for the stamping of sheet metal components

    Science.gov (United States)

    Birkert, A.; Hartmann, B.; Straub, M.

    2017-09-01

    The need for car body structures of higher strength and at the same time lower weight results in serious challenges for the stamping process. Especially the use of high strength steel and aluminium sheets is causing growing problems with regard to elastic springback. To produce accurate parts the stamping dies must be adjusted more or less by the amount of the springback in the opposite direction. For this purpose well-known software solutions use the Displacement Adjustment Method or algorithms which are closely based on that method. A crucial issue of this method is that the generated die surfaces deviate from those of the target geometry with regard to surface area. A new Physical Compensation Method has been developed and validated which takes geometrical nonlinearity into account and creates compensated die geometries with equal-in-area die surfaces. In contrast to the standard mathematical/geometrical approach, the adjusted geometry is generated by a physical approach, which makes use of the virtual part stiffness. Hereby the target geometry is being deformed mechanically in a virtual process based on the springback simulation results by applying virtual forces in an additional elastic simulation. By doing so better part dimensions can be obtained in less tool optimization loops.

  2. A Material Perspective on Consequence of Deformation Heating During Stamping of DP Steels

    Science.gov (United States)

    Şimşir, C.; Çetin, B.; Efe, M.; Davut, K.; Bayramin, B.

    2017-09-01

    Recent studies showed that, during stamping of high strength steels at industrially relevant production rates, local temperature in the blank may rise up to 200°C - 300°C due to deformation heating. Moreover, die temperature may also rise up to 100°C - 150°C for progressive stamping dies. Based on the common assumption that the blank softens as the temperature increases, thermal softening creates a margin in Forming Limit Diagram (FLD) and therefore the FLD determined at room temperature can safely be used for those cases. In this article, the validity of this assumption on DP590 steel is questioned by high temperature tensile tests (RT - 300°C) at various strain rates (10-3 s-1 - 1 s-1). The results indicated a decrease both in uniform and total elongation in 200°C - 300°C range together with several other symptoms of Dynamic Strain Aging (DSA) at all strain rates. Concurrent with the DSA, the simulated FLD confirms the lower formability at high temperature and strain rates. Thus, it is concluded FLD determined at RT may not be valid for the investigated steels.

  3. Predication of coke strength from textural analysis of stamp charged coke supported by coal petrography

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, R.; Dash, P.S.; Chakraborty, D.; Banerjee, P.K.; Kumar, D. [Tata Steel, Jamshedpur (India)

    2005-07-01

    Materials science tells us that defects or flaws in a solid material control the mechanical behaviour of that material. Similarly, in a coke, its strength is associated with the microstructure and texture. Optical microscopy is the most appropriate method for measuring these features. Attempts were made to correlate different types of textures with the strength of stamp charged coke at Tata Steel. The studies revealed that anisotropic carbon is less reactive to carbon dioxide compared to isotropic carbon. There may be two reasons for this: a lower surface area of the carbon available for reaction; the intrinsic reactivity may be lower for molecules which constitute anisotropic carbon. The strength after reaction depends on its anisotropic texture - the smaller size mosaic texture contributes to higher post strength. There are very few reports about use of micro textural analysis to predict cold strength of coke. Test results show that there exists an influence of isotropic carbon on M{sub 10} index. With an increase in isotropic texture, the M{sub 10} index deteriorates. The performance of coke in blast furnaces may be improved by improving room temperature and high temperature strength of coke by selecting coal with higher vitrinite distribution in the present blend through the stamp charging route. 18 refs., 12 figs., 3 tabs.

  4. Virtual method for the determination of an optimum thermal design of hot stamping tools

    Science.gov (United States)

    Weiß, W.; Koplenig, M.; Alb, M.; Graf, J.

    2016-11-01

    This work presents a new virtual method for the optimised thermal design of hot stamping tools. It provides optimal positions of the tool's tempering ducts with respect to the average working temperature and its homogeneous distribution on the surface of a tool. It consists of a specific procedure for hot stamping tool design and a software framework in order to interconnect three domains: (I) a parametrised CAD tool model, (II) a linear thermal solver using a fast boundary element method and (III) an optimisation algorithm. This enables the automated set-up, simulation and optimisation of a duct topology. The boundary conditions for the simulations are derived from a reduced model of the thermal loading of the tool. The virtual method proposed is demonstrated on simplified tool segment geometries. The results are transferred to complex tool designs used in industry. For a selected use case, the number of ducts could be reduced by 50% through the application of the proposed method. These results are validated virtually based on an existing design. Hence, the new virtual method contributes to a CAE-driven tool design and a more efficient tool manufacturing.

  5. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program: 1995. Volume 1

    Science.gov (United States)

    Hyman, William A. (Editor); Sickorez, Donn G. (Editor)

    1996-01-01

    The objectives of the JSC NASA/ASEE Summer Faculty Fellowship Program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of the participants' institutions; and (4) to contribute to the research objectives of the NASA centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project in collaboration with a NASA/JSC colleague. In addition to the faculty participants, the 1995 program included five students. This document is a compilation of the first fifteen of twenty-seven final reports on the research projects completed by the faculty fellows and visiting students during the summer of 1995. The reports of two of the students are integral with that of the respective fellow. Three students wrote separate reports included in Volume 2.

  6. Evaluation of the long-term energy analysis program used for the 1978 EIA Administrator's Report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    Peelle, R. W.; Weisbin, C. R.; Alsmiller, Jr., R. G.

    1981-10-01

    An evaluation of the Long-Term Energy Analysis Program (LEAP), a computer model of the energy portion of the US economy that was used for the 1995-2020 projections in its 1978 Annual Report to Congress, is presented. An overview of the 1978 version, LEAP Model 22C, is followed by an analysis of the important results needed by its users. The model is then evaluated on the basis of: (1) the adequacy of its documentation; (2) the local experience in operating the model; (3) the adequacy of the numerical techniques used; (4) the soundness of the economic and technical foundations of the model equations; and (5) the degree to which the computer program has been verified. To show which parameters strongly influence the results and to approach the question of whether the model can project important results with sufficient accuracy to support qualitative conclusions, the numerical sensitivities of some important results to model input parameters are described. The input data are categorized and discussed, and uncertainties are given for some parameters as examples. From this background and from the relation of LEAP to other available approaches for long-term energy modeling, an overall evaluation is given of the model's suitability for use by the EIA.

  7. Air quality analysis and related risk assessment for the Bonneville Power Administration's Resource Program Environmental Impact Statement

    Energy Technology Data Exchange (ETDEWEB)

    Glantz, C S; Burk, K W; Driver, C J; Liljegren, J C; Neitzel, D A; Schwartz, M N; Dana, M T; Laws, G L; Mahoney, L A; Rhoads, K

    1992-04-01

    The Bonneville Power Administration (BPA) is considering 12 different alternatives for acquiring energy resources over the next 20 years. Each of the alternatives utilizes a full range of energy resources (e.g., coal, cogeneration, conservation, and nuclear); however, individual alternatives place greater emphases on different types of power-producing resources and employ different timetables for implementing these resources. The environmental impacts that would result from the implementation of each alternative and the economic valuations of these impacts, will be an important consideration in the alternative selection process. In this report we discuss the methods used to estimate environmental impacts from the resource alternatives. We focus on pollutant emissions rates, ground-level air concentrations of basic criteria pollutants, the acidity of rain, particulate deposition, ozone concentrations, visibility attenuation, global warming, human health effects, agricultural and forest impacts, and wildlife impacts. For this study, pollutant emission rates are computed by processing BPA data on power production and associated pollutant emissions. The assessment of human health effects from ozone indicated little variation between the resource alternatives. Impacts on plants, crops, and wildlife populations from power plant emissions are projected to be minimal for all resource alternatives.

  8. Studies on the finite element simulation in sheet metal stamping processes

    Science.gov (United States)

    Huang, Ying

    The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

  9. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1987, volume 1

    Science.gov (United States)

    Jones, William B. (Editor); Goldstein, Stanley H. (Editor)

    1987-01-01

    The objective of the NASA/ASEE program were: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA centers. Each faculty fellow spent 10 weeks at Johnson Space Center engaged in a research project commensurate with his/her interests and background and worked in collaboration with a NASA/JSC colleague. A compilation is presented of the final reports on the research projects done by the fellows during the summer of 1987. This is volume 1 of a 2 volume report.

  10. National Aeronautics and Space Administration (NASA)/american Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1991, Volume 2

    Science.gov (United States)

    Hyman, William A. (Editor); Goldstein, Stanley H. (Editor)

    1991-01-01

    The objectives of the program are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participant's institutions; and (4) to contribute to the research objectives of the NASA Centers. A compilation of the final reports on the research projects done by the faculty fellows during the summer of 1991 are presented. Some of the topics covered include: collision avoidance for rover vehicles, bioinstrumentation, neural nets, total quality management of flexible space structures, project scheduling, nondestructive tests, orthostatic intolerance to bedrest, hypersonic reentry simulation, measuring human energy expenditure, tribological models, trace element movement in Anarctic ice, gastrointestinal function, and computer assisted instruction.

  11. Dental opioid prescribing and multiple opioid prescriptions among dental patients: Administrative data from the South Carolina prescription drug monitoring program.

    Science.gov (United States)

    McCauley, Jenna L; Hyer, J Madison; Ramakrishnan, V Ramesh; Leite, Renata; Melvin, Cathy L; Fillingim, Roger B; Frick, Christie; Brady, Kathleen T

    2016-07-01

    Despite increased attention to dentists' roles in curbing opioid misuse, abuse, and diversion, information regarding prescribing practices and the frequency of multiple concurrent opioid prescriptions among dental patients is limited. The authors reviewed South Carolina prescription drug monitoring program data representing dispensed medication for patients prescribed at least 1 opioid by a dentist during the most recently available 2-year time frame (2012-2013). The authors used descriptive analyses to examine the types and frequency of dental opioid prescriptions and the frequency of existing multiple concurrent opioid prescriptions among dental patients. Nearly all dispensed dental opioid prescriptions (99.9%; n = 653,650) were for immediate-release opioids and were initial prescription fills (96.2%). Hydrocodone (76.1%) and oxycodone (12.2%) combination products were the most frequently dispensed opioids prescribed by dentists. People younger than 21 years received 11.2% of dentist-prescribed opioids dispensed. Patients with multiple concurrent opioid prescriptions were identified within 30-day (n = 113,818), 90-day (n = 166,124), and 180-day (n = 205,576) time frames. Dentists prescribed a high volume of the immediate-release opioids dispensed in South Carolina. A notable minority of dental patients had incidents of multiple preexisting opioid prescriptions, a factor implicated in patient misuse, abuse, overdose, and diversion. Use of a prescription drug monitoring program before prescribing provides a record of controlled substances dispensed to a patient and may inform prescribing, coordination of care, and addiction screening or referral. Patients should receive information regarding misuse behaviors and their risks, as well as the importance of secure storage and disposal of leftover opioid medications. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

  12. Administration of Anesthesia

    Medline Plus

    Full Text Available ... OMSs) are trained in all aspects of anesthesia administration. Following dental school, they complete at least four years of training in a hospital-based surgical residency program alongside medical residents in ...

  13. Administration of Anesthesia

    Science.gov (United States)

    ... OMSs) are trained in all aspects of anesthesia administration. Following dental school, they complete at least four years of training in a hospital-based surgical residency program alongside medical residents in ...

  14. 7 CFR 272.5 - Program informational activities.

    Science.gov (United States)

    2010-01-01

    ... creed, national origin or political belief. (c) Program informational activities for low-income..., application procedures, and benefits of the Food Stamp Program. Program informational materials used in such... the socio-economic and demographic characteristics of the target population, types of media used...

  15. Child health promotion program in South Korea in collaboration with US National Aeronautics and Space Administration: Improvement in dietary and nutrition knowledge of young children.

    Science.gov (United States)

    Lim, Hyunjung; Kim, JiEun; Wang, Youfa; Min, Jungwon; Carvajal, Nubia A; Lloyd, Charles W

    2016-10-01

    Childhood obesity has become a global epidemic. Development of effective and sustainable programs to promote healthy behaviors from a young age is important. This study developed and tested an intervention program designed to promote healthy eating and physical activity among young children in South Korea by adaptation of the US National Aeronautics and Space Administration (NASA) Mission X (MX) Program. The intervention program consisted of 4 weeks of fitness and 2 weeks of nutrition education. A sample of 104 subjects completed pre- and post-surveys on the Children's Nutrition Acknowledgement Test (NAT). Parents were asked for their children's characteristics and two 24-hour dietary records, the Nutrition Quotient (NQ) at baseline and a 6-week follow-up. Child weight status was assessed using Korean body mass index (BMI) percentiles. At baseline, 16.4% (boy: 15.4%; girl: 19.2%) of subjects were overweight or obese (based on BMI≥85%tile). Fat consumption significantly decreased in normal BMI children (48.6 ± 16.8 g at baseline to 41.9 ± 18.1 g after intervention, P < 0.05); total NQ score significantly increased from 66.4 to 67.9 ( P < 0.05); total NAT score significantly improved in normal BMI children (74.3 at baseline to 81.9 after the program), children being underweight (from 71.0 to 77.0), and overweight children (77.1 at baseline vs. 88.2 after intervention, P < 0.001). The 6-week South Korean NASA MX project is feasible and shows favorable changes in eating behaviors and nutritional knowledge among young children.

  16. The effects of programmed administration of human parathyroid hormone fragment (1-34) on bone histomorphometry and serum chemistry in rats

    Science.gov (United States)

    Dobnig, H.; Turner, R. T.

    1997-01-01

    PTH treatment can result in dramatic increases in cancellous bone volume in normal and osteopenic rats. However, this potentially beneficial response is only observed after pulsatile treatment; continuous infusion of PTH leads to hypercalcemia and bone abnormalities. The purpose of these studies was to determine the optimal duration of the PTH pulses. A preliminary study revealed that human PTH-(1-34) (hPTH) is cleared from circulation within 6 h after sc administration of an anabolic dose of the hormone (80 microg/kg). To establish the effects of gradually extending the duration of exposure to hPTH without increasing the daily dose, we programmed implanted Alzet osmotic pumps to deliver the 80 microg/kg x day dose of the hormone during pulses of 1, 2, and 6 h/day, or 40 microg/kg x day continuously. Discontinuous infusion was accomplished by alternate spacing of external tubing with hPTH solution and sesame oil. After 6 days of treatment, we evaluated serum chemistry and bone histomorphometry. As negative and positive controls, groups of rats received pumps that delivered vehicle only and 80 microg/kg x day hPTH by daily sc injection, respectively. Dynamic and static bone histomorphometry revealed that the daily sc injection and 1 h/day infusion dramatically increased osteoblast number and bone formation in the proximal tibial metaphysis, whereas longer infusion resulted in systemic side-effects, including up to a 10% loss in body weight, hypercalcemia, and histological changes in the proximal tibia resembling abnormalities observed in patients with chronic primary hyperparathyroidism, including peritrabecular marrow fibrosis and focal bone resorption. Infusion for as little as 2 h/day resulted in minor weight loss and changes in bone histology that were intermediate between sc and continuous administration. The results demonstrate that the therapeutic interval for hPTH exposure is brief, but that programmed administration of implanted hormone is a feasible

  17. Medicaid program; reductions in payments to the states--Health Care Financing Administration. Interim final rule with comment period.

    Science.gov (United States)

    1981-09-30

    This rule amends current Medicaid regulations to implement section 2161 of the Omnibus Budget Reconciliation Act of 1981 (Pub. L 97-35) which imposes reductions in Federal matching payments for fiscal years 1982 through 1984. In the regulations, we describe the conditions and specify minimum criteria under which States may lower the reduction. The conditions are the existence of the qualified hospital cost review program, a specific level of unemployment in a State, and a specific amount of fraud and abuse recoveries by a State or, for fiscal year 1982 only, a combination of fraud and abuse and third party liability recoveries. We intend these regulations to provide guidance as to when the reductions, and offsets against the reductions, will be made and how States can qualify for the offsets. In addition, we have issued a notice of proposed rulemaking elsewhere in this issue of the Federal Register that contains proposed policies concerning recoveries from liable third parties for purposes of implementing section 2161.

  18. Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

    International Nuclear Information System (INIS)

    Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

    2014-01-01

    With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

  19. Use of Veterans Health Administration Mental Health and Substance Use Disorder Treatment After Exiting Prison: The Health Care for Reentry Veterans Program.

    Science.gov (United States)

    Finlay, Andrea K; Stimmel, Matthew; Blue-Howells, Jessica; Rosenthal, Joel; McGuire, Jim; Binswanger, Ingrid; Smelson, David; Harris, Alex H S; Frayne, Susan M; Bowe, Tom; Timko, Christine

    2017-03-01

    The Veterans Health Administration (VA) Health Care for Reentry Veterans (HCRV) program links veterans exiting prison with treatment. Among veterans served by HCRV, national VA clinical data were used to describe contact with VA health care, and mental health and substance use disorder diagnoses and treatment use. Of veterans seen for an HCRV outreach visit, 56 % had contact with VA health care. Prevalence of mental health disorders was 57 %; of whom 77 % entered mental health treatment within a month of diagnosis. Prevalence of substance use disorders was 49 %; of whom 37 % entered substance use disorder treatment within a month of diagnosis. For veterans exiting prison, increasing access to VA health care, especially for rural veterans, and for substance use disorder treatment, are important quality improvement targets.

  20. A study of the quality and effectiveness of the Airway Science Electronic Systems program to meet the workforce needs of the Federal Aviation Administration

    Science.gov (United States)

    Hedge, Clarence Alvin

    1999-11-01

    Scope and method of study. The purpose of the study was to determine the quality and effectiveness of the Airway Science Electronics Systems program to meet the workforce needs of the Federal Aviation Administration (FAA). The study was to research traditional FAA hired electronics technicians and Airway Science degree graduate electronics technicians. More specially, the study sought (1) to compare the traditional electronics training course requirements to the Airway Science curriculum course requirements, (2) to examine the ratio of Airway Science Electronics Systems graduates to graduates of other Airway Science options and also related electronics training and (3) to determine strengths and weaknesses in the Airway Science Electronics System. Findings and conclusions. The data were obtained by questionnaires sent to (1) the 61 recognized Airway Science Institutions, (2) personal interviews with department chairmen who are members of the Oklahoma City Aviation Aerospace Alliance and (3) personal interviews were also conducted with Electronics Technicians and supervisors at the Mike Monroney Aeronautical Center, Oklahoma City, Oklahoma. It was found that the present area of airway science curriculum encompasses Airway Science Management, Airway Computer Science, Airway Electronics Systems, Aviation Maintenance Management and Aircraft Systems Management. Programs in airway science are designed specifically to help prepare individuals for meeting the requirements for a strong educational background for tomorrow's aviation leaders. The data indicated that the majority of airway science students pursue careers with the FAA but also find even greater opportunities in industry. The data also shows that in the surveyed schools with approved airway science programs, Airway Science Management was the most frequent offered program.

  1. United States Food and Drug Administration and Department of Defense shelf-life extension program of pharmaceutical products: progress and promise.

    Science.gov (United States)

    Khan, Saeed R; Kona, Ravikanth; Faustino, Patrick J; Gupta, Abhay; Taylor, Jeb S; Porter, Donna A; Khan, Mansoor

    2014-05-01

    The Department of Defense (DoD)-United States Food and Drug Administration (FDA) shelf-life extension program (SLEP) was established in 1986 through an intra-agency agreement between the DoD and the FDA to extend the shelf life of product nearing expiry. During the early stages of development, special attention was paid to program operation, labeling requirements, and the cost benefits associated with this program. In addition to the substantial cost benefits, the program also provides the FDA's Center for Drug Evaluation and Research with significant scientific understanding and pharmaceutical resource. As a result of this unique resource, numerous regulatory research opportunities to improve public health present themselves from this distinctive scientific database, which includes examples of products shelf life, their long-term stability issues, and various physical and chemical tests to identify such failures. The database also serves as a scientific resource for mechanistic understanding and identification of test failures leading to the development of new formulations or more robust packaging. It has been recognized that SLEP is very important in maintaining both national security and public welfare by confirming that the stockpiled pharmaceutical products meet quality standards after the "expiration date" assigned by the sponsor. SLEP research is an example of regulatory science that is needed to best ensure product performance past the original shelf life. The objective of this article is to provide a brief history and background and most importantly the public health benefits of the SLEP. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  2. Modeling and simulation of stamp deflections in nanoimprint lithography: Exploiting backside grooves to enhance residual layer thickness uniformity

    DEFF Research Database (Denmark)

    Taylor, Hayden; Smistrup, Kristian; Boning, Duane

    2011-01-01

    We describe a model for the compliance of a nanoimprint stamp etched with a grid of backside grooves. We integrate the model with a fast simulation technique that we have previously demonstrated, to show how etched grooves help reduce the systematic residual layer thickness (RLT) variations...

  3. The new Swiss commemorative stamp dedicated to CERN available at the Organization's Meyrin post office on Tuesday, 9 March!

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For some people, the stamp's rays are spreading outwards towards the infinitely large, while for others they focus inwards towards the infinitely small. It's a bit like the proverbial half-full or half-empty glass or a picture that conveys two different images, depending on how you look at it.

  4. Forming of an axially tailored automotive channel section through hot stamping of tailor-welded blanks

    Science.gov (United States)

    Peister, C.; George, R.; Omer, K.; Worswick, M. J.; Malcolm, S.; Dykeman, J.; Yau, C.; Soldaat, R.; Bernert, W.

    2017-09-01

    In this work, top-hat cross-section axial crush rail specimens with tailored properties along their length were investigated. These top-hat channels were hot stamped in a fully cooled die set from tailor-welded blanks (TWBs). The blanks were laser-welded and comprised Usibor® 1500-AS joined to Ductibor® 500-AS in 1.2 mm and 1.6 mm thicknesses. Micro-hardness measurements were taken along the length of the formed specimens to map the hardness profile along their length. The effect of gauge thickness on hardness was evaluated. The hardness profile of these TWB parts was compared to that of parts formed using tailored in-die heating (IDH).

  5. Construction of Time-Stamped Mobility Map for Path Tracking via Smith-Waterman Measurement Matching

    Directory of Open Access Journals (Sweden)

    Mu Zhou

    2014-01-01

    Full Text Available Path tracking in wireless and mobile environments is a fundamental technology for ubiquitous location-based services (LBSs. In particular, it is very challenging to develop highly accurate and cost-efficient tracking systems applied to the anonymous areas where the floor plans are not available for security and privacy reasons. This paper proposes a novel path tracking approach for large Wi-Fi areas based on the time-stamped unlabeled mobility map which is constructed from Smith-Waterman received signal strength (RSS measurement matching. Instead of conventional location fingerprinting, we construct mobility map with the technique of dimension reduction from the raw measurement space into a low-dimensional embedded manifold. The feasibility of our proposed approach is verified by the real-world experiments in the HKUST campus Wi-Fi networks, sMobileNet. The experimental results prove that our approach is adaptive and capable of achieving an adequate precision level in path tracking.

  6. SOCIAL RESPONSIBILITY SCORE: COMPARATIVE STUDY BETWEEN PUBLIC And PRIVATE COMPANIES, BASED In ibase SOCIAL stamp

    Directory of Open Access Journals (Sweden)

    Alexandre Reis

    2008-01-01

    Full Text Available The present article intends to arguing the existing differences and similarities between Social Responsibility actions and praticals developed by the private and public companies. This comparative study of exploring character was carried with the companies owners of Social Stamp IBASE, wich published its Social Balances in the model considered for the institute in the year of 2004. For such, beyond the documentary research involving the published balances, a conceptual revision over the main subjects was necessary and also it constitutes part of the study. The joined results supply measurable and representative information about the main characteristics of social action of the companies, propitiating a comparative analysis and the emission of critical considerations, that do not finish themselves, but establishes a possibility of different readings concerning the models of social responsible management undertaken by companies from public and private segments.

  7. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Science.gov (United States)

    Jelovica Badovinac, I.; Orlić, N.; Lofrumento, C.; Dobrinić, J.; Orlić, M.

    2010-07-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  8. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Energy Technology Data Exchange (ETDEWEB)

    Jelovica Badovinac, I., E-mail: ijelov@phy.uniri.h [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Orlic, N. [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Lofrumento, C. [Dipartimento di Chimica, Universita di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Dobrinic, J. [Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka (Croatia); Orlic, M. [Department of Civil Engineering, Polytechnic of Zagreb, Av. V. Holjevca 15, 10000 Zagreb (Croatia)

    2010-07-21

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  9. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    International Nuclear Information System (INIS)

    Jelovica Badovinac, I.; Orlic, N.; Lofrumento, C.; Dobrinic, J.; Orlic, M.

    2010-01-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  10. Finite element analysis and optimization of process parameters during stamp forming of composite materials

    International Nuclear Information System (INIS)

    Venkatesan, S; Kalyanasundaram, S

    2010-01-01

    In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

  11. Determination of stamp deformation during imprinting on semi-spherical surfaces

    DEFF Research Database (Denmark)

    Kafka, Jan; Matschuk, Maria; Pranov, Henrik

    of sol-gel was applied onto spherical injection mold inserts and subsequently imprinted using a flexible stamp. A hard curing step transformed the sol-gel into a quartz-like and durable material. As an example, we present theory and results regarding the imprint of pillar nanostructures on semi......-spherical mold surfaces. Imprints were realized on three different radii of circumferenceof the spherical mold: R = 0.5 mm, R = 1.0 mm, and R = 2 mm. After hard-curing of theimprinted sol-gel, the inserts were used for cold-mold as well as vario-therm injection molding.The polymer replicas and the inserts were...

  12. Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services

    Science.gov (United States)

    Coïsson, Pierdavide; Telali, Kader; Heumez, Benoit; Lesur, Vincent; Lalanne, Xavier; Jiang Xin, Chang

    2017-09-01

    During magnetic observatory data acquisition, the data time stamp is kept synchronized with a precise source of time. This is usually done using a GPS-controlled pulse per second (PPS) signal. For some observatories located in remote areas or where internet restrictions are enforced, only the magnetometer data are transmitted, limiting the capabilities of monitoring the acquisition operations. The magnetic observatory in Lanzhou (LZH), China, experienced an unnoticed interruption of the GPS PPS starting 7 March 2013. The data logger clock drifted slowly in time: in 6 months a lag of 27 s was accumulated. After a reboot on 2 April 2014 the drift became faster, -2 s per day, before the GPS PPS could be restored on 8 July 2014. To estimate the time lags that LZH time series had accumulated, we compared it with data from other observatories located in East Asia. A synchronization algorithm was developed. Natural sources providing synchronous events could be used as markers to obtain the time lag between the observatories. The analysis of slices of 1 h of 1 s data at arbitrary UTC allowed estimating time lags with an uncertainty of ˜ 11 s, revealing the correct trends of LZH time drift. A precise estimation of the time lag was obtained by comparing data from co-located instruments controlled by an independent PPS. In this case, it was possible to take advantage of spikes and local noise that constituted precise time markers. It was therefore possible to determine a correction to apply to LZH time stamps to correct the data files and produce reliable 1 min averaged definitive magnetic data.

  13. Framework for simulation-driven design of stamping dies considering elastic die and press deformations

    Science.gov (United States)

    Pilthammar, Johan; Wall, Johan; Sigvant, Mats

    2017-10-01

    Sheet metal forming (SMF) simulations are used extensively throughout the development phase of industrial stamping dies. In these SMF simulations, the die and press are normally considered as rigid. Previous research has however shown that elastic deformation in these parts has a significant negative impact on process performance. This paper demonstrates methods for counteracting these negative effects, with a high potential for improved production support and a reduced lead time through a shorter try-out process. A structural finite element model (FE-model) of a simplified die is studied. To account for elastic deformation, the blankholder surfaces are first virtually reworked by adjusting the nodal positions on the die surfaces attaining a pressure distribution in accordance to the design phase SMF simulations with rigid surfaces. The elastic FE-model with reworked surfaces then represents a stamping die in running production. The die is now assumed to be exposed to changed process conditions giving an undesired blankholder pressure distribution. The changed process conditions could for example be due to a change of press line. An optimization routine is applied to compensate the negative effects of the new process conditions. The optimization routine uses the contact forces acting on the shims of the spacer blocks and cushion pins as optimization variables. A flexible simulation environment using MATLAB and ABAQUS is used. ABAQUS is executed from MATLAB and the results are automatically read back into MATLAB. The suggested optimization procedure reaches a pressure distribution very similar to the initial distribution assumed to be the optimum, and thereby verifying the method. Further research is needed for a method to transform the calculated forces in the optimization routine back to shims thicknesses. Furthermore, the optimization time is relatively long and needs to be reduced in the future for the method to reach its full potential.

  14. Recognition of Time Stamps on Full-Disk Hα Images Using Machine Learning Methods

    Science.gov (United States)

    Xu, Y.; Huang, N.; Jing, J.; Liu, C.; Wang, H.; Fu, G.

    2016-12-01

    Observation and understanding of the physics of the 11-year solar activity cycle and 22-year magnetic cycle are among the most important research topics in solar physics. The solar cycle is responsible for magnetic field and particle fluctuation in the near-earth environment that have been found increasingly important in affecting the living of human beings in the modern era. A systematic study of large-scale solar activities, as made possible by our rich data archive, will further help us to understand the global-scale magnetic fields that are closely related to solar cycles. The long-time-span data archive includes both full-disk and high-resolution Hα images. Prior to the widely use of CCD cameras in 1990s, 35-mm films were the major media to store images. The research group at NJIT recently finished the digitization of film data obtained by the National Solar Observatory (NSO) and Big Bear Solar Observatory (BBSO) covering the period of 1953 to 2000. The total volume of data exceeds 60 TB. To make this huge database scientific valuable, some processing and calibration are required. One of the most important steps is to read the time stamps on all of the 14 million images, which is almost impossible to be done manually. We implemented three different methods to recognize the time stamps automatically, including Optical Character Recognition (OCR), Classification Tree and TensorFlow. The latter two are known as machine learning algorithms which are very popular now a day in pattern recognition area. We will present some sample images and the results of clock recognition from all three methods.

  15. Administrating Solr

    CERN Document Server

    Mohan, Surendra

    2013-01-01

    A fast-paced, example-based guide to learning how to administrate, monitor, and optimize Apache Solr.""Administrating Solr"" is for developers and Solr administrators who have a basic knowledge of Solr and who are looking for ways to keep their Solr server healthy and well maintained. A basic working knowledge of Apache Lucene is recommended, but this is not mandatory.

  16. Administrative Synergy

    Science.gov (United States)

    Hewitt, Kimberly Kappler; Weckstein, Daniel K.

    2012-01-01

    One of the biggest obstacles to overcome in creating and sustaining an administrative professional learning community (PLC) is time. Administrators are constantly deluged by the tyranny of the urgent. It is a Herculean task to carve out time for PLCs, but it is imperative to do so. In this article, the authors describe how an administrative PLC…

  17. Space administration

    OpenAIRE

    Worthington, Scott; Worthington, Scott

    2015-01-01

    My dissertation consists of two parts. The larger portion is an hour-long piece for double bass, electronics, and projected text called Space Administration. The second portion, this essay, discusses my musical background leading up to Space Administration, details of the composition itself, and what new directions I see in my work that in part stem from creating the piece Space Administration

  18. CLE Administrator's Handbook.

    Science.gov (United States)

    Bushman, Willard M.

    Designed for both new and experienced continuing legal education (CLE) administrators, this handbook covers curriculum planning, use of audiovisual techniques and resources, and the preparation of written programs and research materials. Such aspects as course selection, program scheduling, supplies and equipment, effective preparation and…

  19. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    International Nuclear Information System (INIS)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-01-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

  20. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Energy Technology Data Exchange (ETDEWEB)

    Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

  1. An Evaluation of the Effectiveness of the National Aeronautics and Space Administration Mission-X Child Health Promotion Program in the United States.

    Science.gov (United States)

    Min, Jungwon; Tan, Zhengqi; Abadie, Laurie; Townsend, Scott; Xue, Hong; Wang, Youfa

    2017-01-01

    To examine the effects of the National Aeronautics and Space Administration Mission-X: Train Like an Astronaut program (MX) on children's health-related knowledge and behaviors of a sample of US participants. A nonexperimental pilot intervention study in 5 cities with a pre-post comparison of children's health-related knowledge and behaviors in the United States in 2014 and 2015. Children (n = 409) with a mean age (standard deviation) of 10.1 (1.7) years. Children answered pre- and postintervention questionnaires. We measured the differences in children's health knowledge on nutrition and physical fitness and behaviors on diet and physical activity as scores. A 6-week web- and school-based intervention for a healthier lifestyle by introducing physical fitness and science activities based on actual astronaut training under a teacher's supervision. Nonparametric analysis and logistic regression models. Participants significantly improved both of their health behaviors on physical activity ( P < .001) and diet ( P = .06) and their health knowledge regarding nutrition ( P < .001) and physical fitness ( P < .001) after the intervention. The improvement in children's behaviors ( P < .001), knowledge ( P < .001), and the total score ( P < .001) after intervention did not significantly vary by sex or age, after adjusting for year of participation and state of residency. The MX seems effective in improving health behaviors and health knowledge of participating children, which may serve as a model for sustainable global child health promotion program. Further research is needed to test its long-term effects on child health.

  2. Training program for energy conservation in new building construction. Volume III. Energy conservation technology for plan examiners and code administrators. Energy Conservation Technology Series 200

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Under the sponsorship of the United States Department of Energy, a Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. The subject of regulation of new building construction to assure energy conservation is recognized as one in which code officials have not had previous exposure. It was also determined that application of the model code would be made at varying levels by officials with both a specific requirement for knowledge and a differing degree of prior training in the state-of-the-art. Therefore, a training program and instructional materials were developed for code officials to assist them in the implementation and enforcement of energy efficient standards and codes. The training program for Energy Conservation Tehnology for Plan Examiners and Code Administrators (ECT Series 200) is presented.

  3. Administrative Circulars

    CERN Multimedia

    Département des Ressources humaines

    2004-01-01

    Administrative Circular N° 2 (Rev. 2) - May 2004 Guidelines and procedures concerning recruitment and probation period of staff members This circular has been revised. It cancels and replaces Administrative Circular N° 2 (Rev. 1) - March 2000. Administrative Circular N° 9 (Rev. 3) - May 2004 Staff members contracts This circular has been revised. It cancels and replaces Administrative Circular N° 9 (Rev. 2) - March 2000. Administrative Circular N° 26 (Rev. 4) - May 2004 Procedure governing the career evolution of staff members This circular has also been revised. It Administrative Circulars Administrative Circular N° 26 (Rev. 3) - December 2001 and brings up to date the French version (Rev. 4) published on the HR Department Web site in January 2004. Operational Circular N° 7 - May 2004 Work from home This circular has been drawn up. Operational Circular N° 8 - May 2004 Dealing with alcohol-related problems...

  4. Tailoring Care to Vulnerable Populations by Incorporating Social Determinants of Health: the Veterans Health Administration's "Homeless Patient Aligned Care Team" Program.

    Science.gov (United States)

    O'Toole, Thomas P; Johnson, Erin E; Aiello, Riccardo; Kane, Vincent; Pape, Lisa

    2016-03-31

    Although the clinical consequences of homelessness are well described, less is known about the role for health care systems in improving clinical and social outcomes for the homeless. We described the national implementation of a "homeless medical home" initiative in the Veterans Health Administration (VHA) and correlated patient health outcomes with characteristics of high-performing sites. We conducted an observational study of 33 VHA facilities with homeless medical homes and patient- aligned care teams that served more than 14,000 patients. We correlated site-specific health care performance data for the 3,543 homeless veterans enrolled in the program from October 2013 through March 2014, including those receiving ambulatory or acute health care services during the 6 months prior to enrollment in our study and 6 months post-enrollment with corresponding survey data on the Homeless Patient Aligned Care Team (H-PACT) program implementation. We defined high performance as high rates of ambulatory care and reduced use of acute care services. More than 96% of VHA patients enrolled in these programs were concurrently receiving VHA homeless services. Of the 33 sites studied, 82% provided hygiene care (on-site showers, hygiene kits, and laundry), 76% provided transportation, and 55% had an on-site clothes pantry; 42% had a food pantry and provided on-site meals or other food assistance. Six-month patterns of acute-care use pre-enrollment and post-enrollment for 3,543 consecutively enrolled patients showed a 19.0% reduction in emergency department use and a 34.7% reduction in hospitalizations. Three features were significantly associated with high performance: 1) higher staffing ratios than other sites, 1) integration of social supports and social services into clinical care, and 3) outreach to and integration with community agencies. Integrating social determinants of health into clinical care can be effective for high-risk homeless veterans.

  5. Political administration

    OpenAIRE

    Åkerstrøm Andersen, Niels

    2000-01-01

    One of the major discussions of the 1990s has been about the relation between politics and administration. The themes of the discussions have been many and varied. It has been suggested that the level of politics should concentrate on the general political outlining and entrust the remaining to the administration. It has been criticised that politicians make their decisions on the basis of single cases, which ought to be an administrative matter entirely. It has been a theme that efficient op...

  6. Administrative Reform

    DEFF Research Database (Denmark)

    Plum, Maja

    Through the example of a Danish reform of educational plans in early childhood education, the paper critically addresses administrative educational reforms promoting accountability, visibility and documentation. Drawing on Foucaultian perspectives, the relation between knowledge and governing...... of administrative technology, tracing how the humanistic values of education embed and are embedded within ‘the professional nursery teacher' as an object and subject of administrative practice. Rather than undermining the humanistic potential of education, it is argued that the technology of accounting...

  7. 76 FR 78966 - Federal Aviation Administration

    Science.gov (United States)

    2011-12-20

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Approval of Noise Compatibility Program for Kona International Airport at Keahole, Keahole, North Kona, HI AGENCY: Federal Aviation Administration, DOT. ACTION: Notice. SUMMARY: The Federal Aviation Administration (FAA) announces its findings on...

  8. Studies of OC-STAMP in Osteoclast Fusion: A New Knockout Mouse Model, Rescue of Cell Fusion, and Transmembrane Topology.

    Directory of Open Access Journals (Sweden)

    Hanna Witwicka

    Full Text Available The fusion of monocyte/macrophage lineage cells into fully active, multinucleated, bone resorbing osteoclasts is a complex cell biological phenomenon that utilizes specialized proteins. OC-STAMP, a multi-pass transmembrane protein, has been shown to be required for pre-osteoclast fusion and for optimal bone resorption activity. A previously reported knockout mouse model had only mononuclear osteoclasts with markedly reduced resorption activity in vitro, but with paradoxically normal skeletal micro-CT parameters. To further explore this and related questions, we used mouse ES cells carrying a gene trap allele to generate a second OC-STAMP null mouse strain. Bone histology showed overall normal bone form with large numbers of TRAP-positive, mononuclear osteoclasts. Micro-CT parameters were not significantly different between knockout and wild type mice at 2 or 6 weeks old. At 6 weeks, metaphyseal TRAP-positive areas were lower and mean size of the areas were smaller in knockout femora, but bone turnover markers in serum were normal. Bone marrow mononuclear cells became TRAP-positive when cultured with CSF-1 and RANKL, but they did not fuse. Expression levels of other osteoclast markers, such as cathepsin K, carbonic anhydrase II, and NFATc1, were not significantly different compared to wild type. Actin rings were present, but small, and pit assays showed a 3.5-fold decrease in area resorbed. Restoring OC-STAMP in knockout cells by lentiviral transduction rescued fusion and resorption. N- and C-termini of OC-STAMP were intracellular, and a predicted glycosylation site was shown to be utilized and to lie on an extracellular loop. The site is conserved in all terrestrial vertebrates and appears to be required for protein stability, but not for fusion. Based on this and other results, we present a topological model of OC-STAMP as a 6-transmembrane domain protein. We also contrast the osteoclast-specific roles of OC- and DC-STAMP with more generalized

  9. 76 FR 24564 - Privacy Act of 1974: Computer Matching Program

    Science.gov (United States)

    2011-05-02

    ... under a state law described in section 3304 of the IRC: (6) Assistance provided under the Food Stamp Act...) of Pub. L. 93-66); (8)(a) Any needs-based pension provided under Chapter 15 of Title 38, United... Affairs: Veterans Benefits Administration-- [[Page 24565

  10. Health system responsiveness and chronic disease care - What is the role of disease management programs? An analysis based on cross-sectional survey and administrative claims data.

    Science.gov (United States)

    Röttger, Julia; Blümel, Miriam; Linder, Roland; Busse, Reinhard

    2017-07-01

    Health system responsiveness is an important aspect of health systems performance. The concept of responsiveness relates to the interpersonal and contextual aspects of health care. While disease management programs (DMPs) aim to improve the quality of health care (e.g. by improving the coordination of care), it has not been analyzed yet whether these programs improve the perceived health system responsiveness. Our study aims to close this gap by analyzing the differences in the perceived health system responsiveness between DMP-participants and non-participants. We used linked survey- and administrative claims data from 7037 patients with coronary heart disease in Germany. Of those, 5082 were enrolled and 1955 were not enrolled in the DMP. Responsiveness was assessed with an adapted version of the WHO responsiveness questionnaire in a postal survey in 2013. The survey covered 9 dimensions of responsiveness and included 17 items for each, GP and specialist care. Each item had five answer categories (very good - very bad). We handled missing values in the covariates by multiple imputation and applied propensity score matching (PSM) to control for differences between the two groups (DMP/non-DMP). We used Wilcoxon-signed-rank and McNemar test to analyze differences regarding the reported responsiveness. The PSM led to a matched and well balanced sample of 1921 pairs. Overall, DMP-participants rated the responsiveness of care more positive. The main difference was found for the coordination of care at the GP, with 62.0% of 1703 non-participants reporting a "good" or "very good" experience, compared to 69.1% of 1703 participants (p < 0.001). The results of our study indicate an overall high responsiveness for CHD-care, as well for DMP-participants as for non-participants. Yet, the results also clearly indicate that there is still a need to improve the coordination of care. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. 7 CFR 235.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 235.3 Section 235.3 Agriculture... CHILD NUTRITION PROGRAMS STATE ADMINISTRATIVE EXPENSE FUNDS § 235.3 Administration. (a) Within the Department, FNS shall act on behalf of the Department in the administration of the program for payment to...

  12. Medicaid program: rescission of School-Based Administration/Transportation final rule, Outpatient Hospital Services final rule, and partial rescission of Case Management Interim final rule. Final rule.

    Science.gov (United States)

    2009-06-30

    This rule finalizes our proposal to rescind the December 28, 2007 final rule entitled, "Elimination of Reimbursement under Medicaid for School Administration Expenditures and Costs Related to Transportation of School-Age Children Between Home and School;" the November 7, 2008 final rule entitled, "Clarification of Outpatient Hospital Facility (Including Outpatient Hospital Clinic) Services Definition;" and certain provisions of the December 4, 2007 interim final rule entitled, "Optional State Plan Case Management Services." These regulations have been the subject of Congressional moratoria and have not yet been implemented (or, with respect to the case management interim final rule, have only been partially implemented) by CMS. In light of concerns raised about the adverse effects that could result from these regulations, in particular, the potential restrictions on services available to beneficiaries and the lack of clear evidence demonstrating that the approaches taken in the regulations are warranted, CMS is rescinding the two final rules in full, and partially rescinding the interim final rule. Rescinding these provisions will permit further opportunity to determine the best approach to further the objectives of the Medicaid program in providing necessary health benefits coverage to needy individuals.

  13. Barriers, facilitators, and benefits of implementation of dialectical behavior therapy in routine care: results from a national program evaluation survey in the Veterans Health Administration.

    Science.gov (United States)

    Landes, Sara J; Rodriguez, Allison L; Smith, Brandy N; Matthieu, Monica M; Trent, Lindsay R; Kemp, Janet; Thompson, Caitlin

    2017-12-01

    National implementation of evidence-based psychotherapies (EBPs) in the Veterans Health Administration (VHA) provides important lessons on the barriers and facilitators to implementation in a large healthcare system. Little is known about barriers and facilitators to the implementation of a complex EBP for emotional and behavioral dysregulation-dialectical behavioral therapy (DBT). The purpose of this study was to understand VHA clinicians' experiences with barriers, facilitators, and benefits from implementing DBT into routine care. This national program evaluation survey measured site characteristics of VHA sites (N = 59) that had implemented DBT. DBT was most often implemented in general mental health outpatient clinics. While 42% of sites offered all four modes of DBT, skills group was the most frequently implemented mode. Fifty-nine percent of sites offered phone coaching in any form, yet only 11% of those offered it all the time. Providers were often provided little to no time to support implementation of DBT. Barriers that were difficult to overcome were related to phone coaching outside of business hours. Facilitators to implementation included staff interest and expertise. Perceived benefits included increased hope and functioning for clients, greater self-efficacy and compassion for providers, and ability to treat unique symptoms for clinics. There was considerable variability in the capacity to address implementation barriers among sites implementing DBT in VHA routine care. Mental health policy makers should note the barriers and facilitators reported here, with specific attention to phone coaching barriers.

  14. Microstructure and Tensile-Shear Properties of Resistance Spot Welded 22MnMoB Hot-Stamping Annealed Steel

    Science.gov (United States)

    Li, Yang; Cui, Xuetuan; Luo, Zhen; Ao, Sansan

    2017-01-01

    The present paper deals with the joining of 22MnMoB hot-stamping annealed steel carried out by the spot welding process. Microstructural characterization, microhardness testing and tensile-shear testing were conducted. The effects of the welding parameters, including the electrode tip diameter, welding current, welding time and electrode force upon the tensile-shear properties of the welded joints, were investigated. The results showed that a weld size of 9.6 mm was required to ensure pullout failure for the 1.8 -mm-thick hot-stamping annealed steel sheet. The welding current had the largest influence upon the tensile-shear properties of the 22MnMoB steel welded joint. The bulk resistance should play an important role in the nugget formation. In pullout failure mode, failure was initiated at the heat-affected zone, where softening occurs owing to the tempering of martensite.

  15. Characterization of patterns of Localized Doping Using Stamping technique for Selective n-Emitter Solar Cell Structure

    Science.gov (United States)

    Mangkornkaew, A.; Fangsuwannarak, T.

    2017-10-01

    In the present, a novel cost-effective process scheme for single step selective emitter diffusion was implemented. It is based on the fabrication of acid-resist pattern using a stamping technique with collaboration of a spin on dopant (SOD) and chemical etched-back emitter methods. The SOD diffusion process provided heavily doping n-emitter. Acid-resist pattern without exploitation of a complex method as a photolithography, was stamped as a metal contact pattern for prevention of a localized heavy-dope region from etching back. Phosphorus doping profiles were controlled by etching back time to provide the formation of n-type selective emitter. Sheet resistance is tunable from 10 to 180 Ohm/Sq on localized n-layer. After removal of the patterned acid-resist, the selective n-emitter solar cell structure was obtained under one-step diffusion to achieve a better blue-light response and low contact resistance.

  16. 48 CFR 1319.812 - Contract administration.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contract administration. 1319.812 Section 1319.812 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Contracting With the Small Business Administration (the 8(a) Program) 1319.812 Contract administration. Awards unde...

  17. 48 CFR 1219.812 - Contract administration.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contract administration. 1219.812 Section 1219.812 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Contracting with the Small Business Administration (The 8(a) Program) 1219.812 Contract administration. (d)...

  18. 7 CFR 225.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 225.3 Section 225.3 Agriculture... CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.3 Administration. (a) Responsibility within the Department. FNS shall act on behalf of the Department in the administration of the Program. (b...

  19. 7 CFR 220.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 220.3 Section 220.3 Agriculture... CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM § 220.3 Administration. (a) Within the Department, FNS shall act on behalf of the Department in the administration of the Program covered by this part. Within...

  20. 7 CFR 227.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 227.3 Section 227.3 Agriculture... CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.3 Administration. (a) Within the Department, FNS shall act on behalf of the Department in the administration of the Program. (b...

  1. 7 CFR 215.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 215.3 Section 215.3 Agriculture... CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.3 Administration. (a) Within the Department, FNS shall act on behalf of the Department in the administration of the Program. Within FNS, CND...

  2. 7 CFR 226.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 226.3 Section 226.3 Agriculture... CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.3 Administration. (a) Within the Department, FNS shall act on behalf of the Department in the administration of the Program. (b...

  3. 7 CFR 210.3 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 210.3 Section 210.3 Agriculture... CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM General § 210.3 Administration. (a) FNS. FNS will act on behalf of the Department in the administration of the Program. Within FNS, the CND will be...

  4. Developing roll-to-roll manufacturing system for flexible and stretchable electronics by direct stamping of silver nano-ink

    OpenAIRE

    Kim, Jiseok

    2014-01-01

    Direct stamping of silver nanoparticle based ink has been developed for cost-effective and process-effective manufacturing of flexible or stretchable electronic devices. Facile removal of residual layer from deposited silver nanoparticles (AgNPs) layer results in high fidelity of final silver electrode without further post-processes. Scanning electron microscopy (SEM) images and energy dispersive x-ray spectroscopic analysis have revealed residue-free transfer of microscale inter-digitated ca...

  5. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    OpenAIRE

    Dong Y.; Formosa D.; Fernandez J.; Li X.; Fuentes G.; Zoltan K.; Dong H.

    2015-01-01

    In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tr...

  6. Development of a new biaxial testing system for generating forming limit diagrams for sheet metals under hot stamping conditions

    OpenAIRE

    Shao, Z; Li, N; Lin, J; Dean, TA

    2016-01-01

    Conventional experimental approaches used to generate forming limit diagrams (FLDs) for sheet metals at different linear strain paths are not applicable to hot stamping and cold die quenching processes because cooling occurs prior to deformation and consistent values of heating rate, cooling rate, deformation temperature and strain rate are not easy to obtain. A novel biaxial testing system for use in a Gleeble testing machine has been adopted to generate forming limits of sheet metals, inclu...

  7. Image Subtraction Reduction of Open Clusters M35 & NGC 2158 in the K2 Campaign 0 Super Stamps

    Science.gov (United States)

    Soares-Furtado, M.; Hartman, J. D.; Bakos, G. Á.; Huang, C. X.; Penev, K.; Bhatti, W.

    2017-04-01

    We observed the open clusters M35 and NGC 2158 during the initial K2 campaign (C0). Reducing these data to high-precision photometric timeseries is challenging due to the wide point-spread function (PSF) and the blending of stellar light in such dense regions. We developed an image-subtraction-based K2 reduction pipeline that is applicable to both crowded and sparse stellar fields. We applied our pipeline to the data-rich C0 K2 super stamp, containing the two open clusters, as well as to the neighboring postage stamps. In this paper, we present our image subtraction reduction pipeline and demonstrate that this technique achieves ultra-high photometric precision for sources in the C0 super stamp. We extract the raw light curves of 3960 stars taken from the UCAC4 and EPIC catalogs and de-trend them for systematic effects. We compare our photometric results with the prior reductions published in the literature. For de-trended TFA-corrected sources in the 12-12.25 {{{K}}}{{p}} magnitude range, we achieve a best 6.5-hour window running rms of 35 ppm, falling to 100 ppm for fainter stars in the 14-14.25 {{{K}}}{{p}} magnitude range. For stars with {K}p> 14, our de-trended and 6.5-hour binned light curves achieve the highest photometric precision. Moreover, all our TFA-corrected sources have higher precision on all timescales investigated. This work represents the first published image subtraction analysis of a K2 super stamp. This method will be particularly useful for analyzing the Galactic bulge observations carried out during K2 campaign 9. The raw light curves and the final results of our de-trending processes are publicly available at http://k2.hatsurveys.org/archive/.

  8. The Choices programme: a simple, front-of-pack stamp making healthy choices easy.

    Science.gov (United States)

    Dötsch-Klerk, Mariska; Jansen, Léon

    2008-01-01

    Some food products fit better within a healthy diet than others, but how can consumers tell? The Choices programme is a simple and internationally-applicable programme to help consumers make a healthy choice on food and beverages and to stimulate industry towards healthy product innovation in all food groups. The essence of the programme is a front-of-pack stamp on products that pass an evaluation against scientific criteria. To that end generic criteria have been established for levels of saturated fat, trans fat, sugars and sodium, which are based on international dietary guidelines (FAO/WHO). For some food categories there are specific criteria for these nutrients as well as for dietary fibre and calories. In this way the criteria are challenging without being impossible to meet. The programme has been initiated by food industry and is open to all companies in food industry, retail and catering. The approach is also supported by nutritional scientists, governments and NGOs. An independent scientific committee is responsible for designing and periodically reviewing the qualifying criteria. The current qualifying criteria were developed by scientific committees in the Netherlands and Belgium. These criteria will now be reviewed by an International Scientific Committee, consisting of internationally-recognised food and nutrition experts. To accommodate the developments in nutrition science and food technology, this review will take place every two years.

  9. Mechanical behavior and modelisation of Ti-6Al-4V titanium sheet under hot stamping conditions

    Science.gov (United States)

    Sirvin, Q.; Velay, V.; Bonnaire, R.; Penazzi, L.

    2017-10-01

    The Ti-6Al-4V titanium alloy is widely used for the manufacture of aeronautical and automotive parts (solid parts). In aeronautics, this alloy is employed for its excellent mechanical behavior associated with low density, outstanding corrosion resistance and good mechanical properties up to 600°C. It is especially used for the manufacture of fuselage frames, on the pylon for carrying out the primary structure (machining forged blocks) and the secondary structure in sheet form. In this last case, the sheet metal forming can be done through various methods: at room temperature by drawing operation, at very high temperature (≃900°C) by superplastic forming (SPF) and at intermediate temperature (≥750°C) by hot forming (HF). In order to reduce production costs and environmental troubles, the cycle times reduction associated with a decrease of temperature levels are relevant. This study focuses on the behavior modelling of Ti-6Al-4V alloy at temperatures above room temperature to obtained greater formability and below SPF condition to reduce tools workshop and energy costs. The displacement field measurement obtained by Digital Image Correlation (DIC) is based on innovative surface preparation pattern adapted to high temperature exposures. Different material parameters are identified to define a model able to predict the mechanical behavior of Ti-6Al-4V alloy under hot stamping conditions. The hardening plastic model identified is introduced in FEM to simulate an omega shape forming operation.

  10. Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

    Science.gov (United States)

    Ma, Xuezhi; Liu, Qiushi; Xu, Da; Zhu, Yangzhi; Kim, Sanggon; Cui, Yongtao; Zhong, Lanlan; Liu, Ming

    2017-11-08

    A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g., hexagonal boron nitride) to pick up the 2D materials. Here, we develop a capillary-force-assisted clean-stamp technique that uses a thin layer of evaporative liquid (e.g., water) as an instant glue to increase the adhesion energy between 2D crystals and polydimethylsiloxane (PDMS) for the pick-up step. After the liquid evaporates, the adhesion energy decreases, and the 2D crystal can be released. The thin liquid layer is condensed to the PDMS surface from its vapor phase, which ensures the low contamination level on the 2D materials and largely remains their chemical and electrical properties. Using this method, we prepared graphene-based transistors with low charge-neutral concentration (3 × 10 10 cm -2 ) and high carrier mobility (up to 48 820 cm 2 V -1 s -1 at room temperature) and heterostructure optoelectronics with high operation speed. Finally, a capillary-force model is developed to explain the experiment.

  11. A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

    Directory of Open Access Journals (Sweden)

    Chih-Ting Lin

    2012-08-01

    Full Text Available A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

  12. Hot stamping of AA6082 tailor welded blanks: experiment and FE simulation

    Directory of Open Access Journals (Sweden)

    Liu Jun

    2016-01-01

    Full Text Available An advanced forming technology, solution Heat treatment, Forming and in-die Quenching (HFQ®, has been employed to form AA6082 tailor welded blanks (TWBs. In comparison with conventional stamping of TWBs, the mechanical properties and formability of AA6082 laser TWBs could be improved under the HFQ® forming condition. The TWB was divided into three physical zones, i.e. base metal, heat affected zone (HAZ and weld zone, based on the hardness distribution. It was found that the degraded hardness of the weldment can be restored after HFQ® forming. TWBs of AA6082 with different thickness ratios of 2 (2–1 mm, 1.3 (2–1.5 mm and 1 (1.5–1.5 mm were used to study the TWB thickness ratio effects on the forming behaviour. Hemispherical punch dome tests on the TWBs with varying thickness ratios demonstrated different formabilities, and indicated increased displacement of the weld line with increasing thickness ratio. Finite element (FE modelling was adopted to analyse the weld line movement and strain distributions during HFQ® forming.

  13. Forming and quenching behaviours in hot stamping of thin quenchable sheets

    Directory of Open Access Journals (Sweden)

    Nakagawa Yuki

    2015-01-01

    Full Text Available A thin aluminium-coated quenchable steel sheet was hot-stamped to investigate the effect of the thickness. The sheets having 0.6, 1.0 and 1.6 mm in thickness were heated at 900 ∘C by a furnace and formed after 7 s from the furnace. The cooling rates of 0.6 mm and 1.0 mm in thickness from 900 ∘C to 400 ∘C under air cooling were 20.9 ∘C/s and 13.6 ∘C/s, respectively. The hardness of the air-cooled sheets having 1.0 mm in thickness was 300 HV1, whereas that of the sheet having 0.6 mm in thickness was 380 HV1 because of the high cooling rate. The Vickers hardness of the U-bent sheets of 0.6 and 1.0 mm after 7 s from the furnace without the holding time at the bottom dead centre were 500 and 430 HV1, respectively.

  14. Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

    Science.gov (United States)

    Vollmer, R.; Palm, C.

    2017-09-01

    The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

  15. Effect of cooling rate during hot stamping on low cyclic fatigue of boron steel sheet

    Science.gov (United States)

    Suh, Chang Hee; Jang, Won Seok; Oh, Sang Kyun; Lee, Rac Gyu; Jung, Yun-Chul; Kim, Young Suk

    2012-08-01

    Boron steel is widely used throughout the automobile industry due to its high tensile strength and hardenability. When boron steel is used for body parts, only high strength is required for crashworthiness. However, when boron steel is used for chassis parts, a high fatigue life is needed. The microstructure of boron steel is mainly affected by the cooling rate during hot stamping. Therefore, this study investigated the low cyclic fatigue life according to the cooling rate. The fatigue life increased at a low strain amplitude when the cooling rate was fast. However, at a high strain amplitude, the fatigue life decreased, due to the low ductility and fracture toughness of the martensite formed by rapid cooling. Martensite formed by a fast cooling rate shows excellent fatigue life at a low total strain amplitude; however, a multiphase microstructure formed by a slow cooling rate is recommended if the parts experience high and low total strain amplitudes alternately. In addition, the cooling rate has little effect on the distribution of solute boron and boron precipitations, so it is expected that boron rarely affects low cyclic fatigue.

  16. Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

    Science.gov (United States)

    Veit, R.; Hofmann, H.; Kolleck, R.; Sikora, S.

    2011-01-01

    Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating. In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

  17. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Science.gov (United States)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny-Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples.

  18. Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction

    Science.gov (United States)

    Deng; Wu; Brittain; Whitesides

    2000-07-15

    This paper describes a practical method for the fabrication of photomasks, masters, and stamps/molds used in soft lithography that minimizes the need for specialized equipment. In this method, CAD files are first printed onto paper using an office printer with resolution of 600 dots/in. Photographic reduction of these printed patterns transfers the images onto 35-mm film or microfiche. These photographic films can be used, after development, as photomasks in 1:1 contact photolithography. With the resulting photoresist masters, it is straightforward to fabricate poly(dimethylsiloxane) (PDMS) stamps/molds for soft lithography. This process can generate microstructures as small as 15 microm; the overall time to go from CAD file to PDMS stamp is 4-24 h. Although access to equipment-spin coater and ultraviolet exposure tool-normally found in the clean room is still required, the cost of the photomask itself is small, and the time required to go from concept to device is short. A comparison between this method and all other methods that generate film-type photomasks has been performed using test patterns of lines, squares, and circles. Three microstructures have also been fabricated to demonstrate the utility of this method in practical applications.

  19. Food Assistance Programs and Outcomes in the Context of Welfare Reform

    NARCIS (Netherlands)

    Huffman, S.K.

    2008-01-01

    Objective. Food assistance programs play an important role in meeting the basic needs of low-income households. We consider how the Food Stamp Program (FSP), labor force participation, and food insecurity status affect outcomes of low-income households under different program designs and economic

  20. Offentlig administration

    DEFF Research Database (Denmark)

    Nielsen, Elof Nellemann; Rehr, Preben René

    En undervisningsbog der henvender sig til administrationsbacheloruddannelsen. Kapitlerne er inddelt efter modulerne på uddannelsen og indeholder derfor elementer af administration, forvaltning, økonomistyring, innovation, samfundsvidenskabelige metoder og politisk styrede organisationer.......En undervisningsbog der henvender sig til administrationsbacheloruddannelsen. Kapitlerne er inddelt efter modulerne på uddannelsen og indeholder derfor elementer af administration, forvaltning, økonomistyring, innovation, samfundsvidenskabelige metoder og politisk styrede organisationer....