WorldWideScience

Sample records for stable electro-optic response

  1. Frequency dispersion of electro-optical properties over a wide range by means of time-response analysis.

    Science.gov (United States)

    Abarkan, Mustapha; Salvestrini, Jean Paul; Aillerie, Michel; Fontana, Marc D

    2003-05-01

    We show that a Z-transform-based time-response analysis of the electro-optical response of a crystal to a step voltage with a short rise time allows one to obtain the dispersion of the electro-optical coefficients over a wide frequency range. We describe the method employed and present the results obtained for the main electroptic coefficients (r22, r61, and rc) of a standard LiNbO3 crystal. We also show that this method is able to provide even small values of the electro-optic coefficient as well as the dispersion within a wide frequency range, which is limited only by the rise time of the step voltage.

  2. Measuring high-frequency responses of an electro-optic phase modulator based on dispersion induced phase modulation to intensity modulation conversion

    Science.gov (United States)

    Zhang, Shangjian; Wang, Heng; Wang, Yani; Zou, Xinhai; Zhang, Yali; Liu, Shuang; Liu, Yong

    2014-11-01

    We investigate the phase modulation to intensity modulation conversion in dispersive fibers for measuring frequency responses of electro-optic phase modulators, and demonstrate two typical measurements with cascade path and fold-back path. The measured results achieve an uncertainty of less than 2.8% within 20 GHz. Our measurements show stable and repeatable results because the optical carrier and its phase-modulated sidebands are affected by the same fiber impairments. The proposed method requires only dispersive fibers and works without any small-signal assumption, which is applicable for swept frequency measurement at different driving levels and operating wavelengths.

  3. Photo-stimulated electro-optic response of liquid-crystalline system with trans-cis photo-isomerizable agent

    International Nuclear Information System (INIS)

    Hadjichristov, G B; Marinov, Y G; Yelamaggad, C V

    2014-01-01

    A rather strong photo-stimulated enhancement of photo-induced bend flexoelectric effect based on trans-cis photoisomerization of azo bond was found in a guest-host system formed from the nematic liquid crystal (LC) N-(4-methoxybenzylidene)-4-butylaniline (MBBA) as a host, and the azobenzene LC 4-hexyloxybenzoloxy-4'-cyanoazobenzene, as a guest photoactive agent at 1 wt.% concentration. Upon application of electric field, thin homeotropic layers of thickness 100 pm containing this photo-sensitized LC mixture were investigated as subjected to a relatively weak illumination with UV light (λ = 375 nm, from narrow-band light-emitting diode, LED). The stimulation of the photoactive electro-optic response of azobenzene-doped MBBA (owing to enhanced photo-induced bend flexoelectric effect driven by the photo-isomerizable dopants) was achieved by pre-resonant excitation of the photoactive agent. The degree of the effect measured is of potential interest for thin-film photoactive electro-optic applications. The UV light-induced effect in azobenzene-doped MBBA was reversible; the back (relaxation) process was stimulated by light in the blue from a LED with broadband spectrum centered at 455 nm

  4. Nonlinearity effect of electro-optical modulator response in double spread CDMA radio-over-fiber transmissions

    Science.gov (United States)

    Huang, Jen-Fa; Yen, Chih-Ta; Li, Tzung-Yen

    2008-07-01

    This study presents a double-spread code-division multiple-access (CDMA) scheme for radio-over-fiber (RoF) transmissions. The network coder/decoders (codecs) are implemented using arrayed-waveguide grating (AWG) routers coded with maximal-length sequence ( M-sequence) codes. The effects of phase-induced intensity noise (PIIN) and multiple-access interference (MAI) on the system performance are evaluated numerically for different values of the optical modulation index (OMI) during the nonlinear electro-optical modulator (EOM) response. At low OMI optical device noise is dominant, but at high OMI nonlinear effect becomes significant. Numerical result shows that the system performance is highly sensitive to the OMI. Therefore, specifying an appropriate value of the OMI is essential in optimizing the system performance. The influence of the degree of polarization (DOP) in the system is also discussed. By employing the scrambler in front of the balanced photo-detector, the system performance can be enhanced. The high-performance, low-cost characteristics of the double-spread CDMA render the scheme an ideal solution for radio-CDMA wireless system cascaded with optical CDMA network.

  5. Electro-Optical Characterization

    Energy Technology Data Exchange (ETDEWEB)

    2006-06-01

    In the Electro-Optical Characterization group, within the National Center for Photovoltaic's Measurements and Characterization Division, we use various electrical and optical experimental techniques to relate photovoltaic device performance to the methods and materials used to produce them. The types of information obtained by these techniques range from small-scale atomic-bonding information to large-scale macroscopic quantities such as optical constants and electron-transport properties. Accurate and timely measurement of the electro-optical properties as a function of device processing provides researchers and manufacturers with the knowledge needed to troubleshoot problems and develop the knowledge base necessary for reducing cost, maximizing efficiency, improving reliability, and enhancing manufacturability. We work collaboratively with you to solve materials- and device-related R&D problems. This sheet summarizes our primary techniques and capabilities.

  6. Electric field and temperature measurement using ultra wide bandwidth pigtailed electro-optic probes.

    Science.gov (United States)

    Bernier, Maxime; Gaborit, Gwenaël; Duvillaret, Lionel; Paupert, Alain; Lasserre, Jean-Louis

    2008-05-01

    We present pigtailed electro-optic probes that allow a simultaneous measurement of high frequency electric fields and temperature using a unique laser probe beam. This has been achieved by the development of a novel probe design associated with a fully automated servo-controlled optical bench, initially developed to stabilize the electric field sensor response. The developed electro-optic probes present a stable response in outdoors conditions over a time duration exceeding 1 h, a frequency bandwidth from kHz to tens of GHz with a sensitivity of 0.7 Vm(-1)Hz(-(1/2)), and a temperature accuracy of 40 mK.

  7. Electro-optic response of metal halide : A first-principles study

    Indian Academy of Sciences (India)

    Amreen Bano

    2017-07-08

    Jul 8, 2017 ... the optical properties of cubic CsPbI3. In this paper, we assess the properties of halide perovskite CsPbI3 using density functional theory (DFT) for ground-state proper- ties like electronic band structure, and density functional perturbation theory (DFPT) for dielectric and optical response functions. We have ...

  8. Present status of metrology of electro-optical surveillance systems

    Science.gov (United States)

    Chrzanowski, K.

    2017-10-01

    There has been a significant progress in equipment for testing electro-optical surveillance systems over the last decade. Modern test systems are increasingly computerized, employ advanced image processing and offer software support in measurement process. However, one great challenge, in form of relative low accuracy, still remains not solved. It is quite common that different test stations, when testing the same device, produce different results. It can even happen that two testing teams, while working on the same test station, with the same tested device, produce different results. Rapid growth of electro-optical technology, poor standardization, limited metrology infrastructure, subjective nature of some measurements, fundamental limitations from laws of physics, tendering rules and advances in artificial intelligence are major factors responsible for such situation. Regardless, next decade should bring significant improvements, since improvement in measurement accuracy is needed to sustain fast growth of electro-optical surveillance technology.

  9. Missile Electro-Optical Countermeasures Simulation Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory comprises several hardware-in-the-loop missile flight simulations designed specifically to evaluate the effectiveness of electro-optical air defense...

  10. Electro-Optics/Low Observables Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Electro-Optics/Low Observables Laboratory supports graduate instruction for students enrolled in the Low Observables program. Its purpose is to introduce these...

  11. Electro optical monitor final report

    CERN Document Server

    Dehler, M

    2013-01-01

    In the CLIC two beam acceleration scheme the Main Beam must be precisely synchronized with respect to the RF power produced by the Drive Beam. Timing errors would have an impact on the collider performances. The Drive Beam phase errors should be controlled, by means of a feed forward system, within 0.1 ° (23 fs @ 12GHz) to avoid a luminosity reduction larger than 2%. A beam phase arrival monitor is an essential component of the system. As an alternative to a classical design using analogue electronic done in task 9.5.1., we pursue an approach using electro optical modulators. The advantage of this is its very high band width, it is measuring the arrival time of individual bunches with a potential resolution below 10 fs. The system was designed, manufactured and tested. As specified in the work package, the performance with beam was validated at the PSI injector.

  12. Proposal for electro-optic multiplier based on dual transverse electro-optic Kerr effect.

    Science.gov (United States)

    Li, Changsheng

    2008-10-20

    A novel electro-optic multiplier is proposed, which can perform voltage multiplication operation by use of the Kerr medium exhibiting dual transverse electro-optic Kerr effect. In this kind of Kerr medium, electro-optic phase retardation is proportional to the square of its applied electric field, and orientations of the field-induced birefringent axes are only related to the direction of the field. Based on this effect, we can design an electro-optic multiplier by selecting the crystals of 6/mmm, 432, and m3m classes and isotropic Kerr media such as glass. Simple calculation demonstrates that a kind of glass-ceramic material with a large Kerr constant can be used for the design of the proposed electro-optic multiplier.

  13. Electro-optical switching of liquid crystals of graphene oxide

    Science.gov (United States)

    Song, Jang-Kun

    Electric field effects on aqueous graphene-oxide (GO) dispersions are reviewed in this chapter. In isotropic and biphasic regimes of GO dispersions, in which the inter-particle friction is low, GO particles sensitively respond to the application of electric field, producing field-induced optical birefringence. The electro-optical sensitivity dramatically decreases as the phase transits to the nematic phase; the increasing inter-particle friction hinders the rotational switching of GO particles. The corresponding Kerr coefficient reaches the maximum near the isotropic to biphasic transition concentration, at which the Kerr coefficient is found be c.a. 1:8 · 10-5 mV-2, the highest value ever reported in all Kerr materials. The exceptionally large Kerr effect arises from the Maxwell- Wagner polarization of GO particles with an extremely large aspect ratio and a thick electrical double layer (EDL). The polarization sensitively depends on the ratio of surface and bulk conductivities in dispersions. As a result, low ion concentration in bulk solvent is highly required to achieve a quality electro-optical switching in GO dispersions. Spontaneous vinylogous carboxylic reaction in GO particles produces H+ ions, resulting in spontaneous degradation of electro-optical response with time, hence the removal of residual ions by using a centrifuge cleaning process significantly improves the electro-optical sensitivity. GO particle size is another important parameter for the Kerr coefficient and the response time. The best performance is observed in a GO dispersion with c.a. 0.5 μm mean size. Dielectrophoretic migration of GO particles can be also used to manipulate GO particles in solution. Using these unique features of GO dispersions, one can fabricate GO liquid crystal devices similar to conventional liquid crystal displays; the large Kerr effect allows fabricating a low power device working at extremely low electric fields.

  14. Measurements and characterization - Electro-optical characterization

    Energy Technology Data Exchange (ETDEWEB)

    Cook, G.

    2000-03-16

    This brochure presents the capabilities that the Measurements and Characterization Division has in Electro-Optical Characterization, in which a variety of spectroscopy, ellipsometry, and capacitance techniques are used to probe the fundamental electrical and optical properties of solid-state materials.

  15. Effects of photoinitiator on electro-optical properties of polymerization-induced phase separation blue-phase liquid crystals.

    Science.gov (United States)

    Kemiklioglu, Emine; Chien, Liang-Chy

    2017-04-01

    We have reported polymer-dispersed blue-phase (PDBP) liquid-crystal films via polymerization-induced phase separation. PDBP films are prepared by photochemical polymerization of curable crosslinking agent, monomer and blue-phase liquid crystal under an ultraviolet (UV) light. The influences of photoinitiator and weight ratio between monomer/crosslinking agent and blue phase on the electro-optical properties of PDBP liquid-crystal samples are investigated. The electro-optical (E-O) properties of PDBP films are determined in the top-down electro-optical cell. PDBP liquid-crystal films show good E-O properties with high contrast ratio and fast response time.

  16. Quantum nondemolition measurement with a nonclassical meter input and an electro-optic enhancement

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund; Buchler, B.C.; Bachor, H.A.

    2002-01-01

    Optical quantum nondemolition measurements are performed using a beamsplitter with a nonclassical meter input and a electro-optic feedforward loop. The nonclassical meter input is provided by a stable 4.5 dB amplitude squeezed source generated by an optical parametric amplifier. We show...

  17. Organic-based electro-optic modulators for microwave photonic applications

    Science.gov (United States)

    Eng, David

    As cutting-edge microwave photonic systems with higher complexity and stringent device requirement are being developed, the demand higher performance modulators with lower drive voltages and higher bandwidth is beginning to overtake the physical limitations of existing modulators based in LiNbO3. To address this growing demand, groundbreaking work in the field of organic electro-optic materials has been achieved over the past 10--15 years that has resulted in materials with electro-optic coefficients up to 10 times that of LiNbO3 and with demonstrated response times into the THz regime. This dissertation details work towards developing low drive-voltage, high bandwidth organic-based electro-optic modulators to support next generation microwave photonic systems. Initial efforts were focused on designing an organic electro-optic material based low frequency phase modulator and developing a fabrication procedure that successfully integrates the material without compromising its electro optic activity. Additionally a procedure for inducing the high electro-optic activity in the waveguide core through a process known as 'poling' was developed. The phase modulators were then characterized to confirm the expected high electro-optic activity and correspondingly low drive voltages. To transition from low frequency modulation to broadband operation it was necessary to gather some dielectric information of the waveguide materials for RF design. Because traditional RF dielectric constant measurements assume thick substrates on the order of 100s of microns, a modified microstrip ring resonator technique was developed to measure the dielectric constant of thin, polymer waveguide films on the order of 10 mum out to 110 GHz. A high frequency traveling wave microstrip modulator was then designed and optimized for operation up to 50 GHz, and efforts were turned towards RF packaging of the microstrip modulators for practical utilization and integration. To feed the RF signals a

  18. 100 GHz pulse waveform measurement based on electro-optic sampling

    Science.gov (United States)

    Feng, Zhigang; Zhao, Kejia; Yang, Zhijun; Miao, Jingyuan; Chen, He

    2018-05-01

    We present an ultrafast pulse waveform measurement system based on an electro-optic sampling technique at 1560 nm and prepare LiTaO3-based electro-optic modulators with a coplanar waveguide structure. The transmission and reflection characteristics of electrical pulses on a coplanar waveguide terminated with an open circuit and a resistor are investigated by analyzing the corresponding time-domain pulse waveforms. We measure the output electrical pulse waveform of a 100 GHz photodiode and the obtained rise times of the impulse and step responses are 2.5 and 3.4 ps, respectively.

  19. Coulomb field strength measurement by electro-optic spectral decoding system at the CALIFES beam line

    CERN Document Server

    Pan, R; Lefevre, T; Gillepsie, WA; CERN. Geneva. ATS Department

    2016-01-01

    Electro-optic (EO) techniques are increasingly used for longitudinal bunch profile measurements. A bunch profile monitor, based on electro-optic spectral decoding(EOSD), has been developed and demonstrated on the CALIFES beam line at CERN. The EO response is analysed using a frequency domain description, and two methods for extraction of absolute Coulomb field strengths from the electron bunch are demonstrated. Measurements at field strengths up to 1.3 MV/m agree with the expectation based on independent charge measurements.

  20. Electro-Optical Data Acquisition and Tracking System

    Data.gov (United States)

    Federal Laboratory Consortium — The Electro-Optical Data Acquisition and Tracking System (EDATS) dynamically tracks and measures target signatures. It consists of an instrumentation van integrated...

  1. Nonlinear optical polymers for electro-optic signal processing

    Science.gov (United States)

    Lindsay, Geoffrey A.

    1991-01-01

    Photonics is an emerging technology, slated for rapid growth in communications systems, sensors, imagers, and computers. Its growth is driven by the need for speed, reliability, and low cost. New nonlinear polymeric materials will be a key technology in the new wave of photonics devices. Electron-conjubated polymeric materials offer large electro-optic figures of merit, ease of processing into films and fibers, ruggedness, low cost, and a plethora of design options. Several new broad classes of second-order nonlinear optical polymers were developed at the Navy's Michelson Laboratory at China Lake, California. Polar alignment in thin film waveguides was achieved by electric-field poling and Langmuir-Blodgett processing. Our polymers have high softening temperatures and good aging properties. While most of the films can be photobleached with ultraviolet (UV) light, some have excellent stability in the 500-1600 nm range, and UV stability in the 290-310 nm range. The optical nonlinear response of these polymers is subpicosecond. Electro-optic switches, frequency doublers, light modulators, and optical data storage media are some of the device applications anticipated for these polymers.

  2. Electro-optic imaging Fourier transform spectrometer

    Science.gov (United States)

    Chao, Tien-Hsin (Inventor); Znod, Hanying (Inventor)

    2009-01-01

    An Electro-Optic Imaging Fourier Transform Spectrometer (EOIFTS) for Hyperspectral Imaging is described. The EOIFTS includes an input polarizer, an output polarizer, and a plurality of birefringent phase elements. The relative orientations of the polarizers and birefringent phase elements can be changed mechanically or via a controller, using ferroelectric liquid crystals, to substantially measure the spectral Fourier components of light propagating through the EIOFTS. When achromatic switches are used as an integral part of the birefringent phase elements, the EIOFTS becomes suitable for broadband applications, with over 1 micron infrared bandwidth.

  3. Electro-optical fuel pin identification system

    International Nuclear Information System (INIS)

    Kirchner, T.L.

    1978-09-01

    A prototype Electro-Optical Fuel Pin Identification System referred to as the Fuel Pin Identification System (FPIS) has been developed by the Hanford Engineering Development Laboratory (HEDL) in support of the Fast Flux Test Facility (FFTF) presently under construction at HEDL. The system is designed to remotely read an alpha-numeric identification number that is roll stamped on the top of the fuel pin end cap. The prototype FPIS consists of four major subassemblies: optical read head, digital compression electronics, video display, and line printer

  4. Progress in Nano-Electro-Optics V

    CERN Document Server

    Ohtsu, Motoichi

    2006-01-01

    Focusing on nanophotonics, which has been proposed by M. Ohtsu in 1993, this volume begins with theories for operation principles of characteristic nanophotonic devices and continues with novel optical near field phenomena for fabricating nanophotonic devices. Further topics include: unique properties of optical near fields and their applications to operating nanophotonic devices; and nanophotonic information and communications systems that can overcome the integration-density limit with ultra-low-power operation as well as unique functionalities. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  5. Electro-optics and lasers in Israel

    Science.gov (United States)

    Van Zwaren, Joesph

    1992-05-01

    With over 3,000 scientists, engineers, and technicians spread out in some 86 companies, and in 10 universities and research institutes, all within less than a 2 hour drive from one another, Israel has no doubt one of the largest concentrations of researchers and skilled manpower in electro-optics and lasers in the world. This report presents an up-to-date picture of the field in Israel, covering the industry, academia and education. The recent wave of Russian immigration is bringing thousands of scientists and tens of thousands of engineers and is expected to make an impact on the field of electro-optics and lasers. A million immigrants from Russia are expected to come between 1990 and 1995. There were 3,700 scientists and 2,800 engineers among the first 200,000 Soviet immigrants. As most of this qualified manpower can not be expected to be absorbed by the existing industry, the Israeli government is actively encouraging local and foreign investors and local and multinational companies to help develop new and expanded high-tech enterprises in Israel. The Ministry of Industry and Trade has embarked upon a broad ranged program for industrial growth and immigrant absorption with the goal of doubling technology-based exports in the next four years. The Ministry of Science and Technology has started a program supporting R&D projects at the different universities for immigrant scientists with the goal of capitalizing on the talents of the newcomers to strengthen academia.

  6. Electro-optical frequency shifting of lasers for plasma diagnostics

    International Nuclear Information System (INIS)

    Forman, P.R.

    1977-07-01

    An electro-optical frequency shifting device is proposed as an aid for plasma physics heterodyne interferometry and heterodyne scattering experiments. The method has the advantage over other electro-optic shifters, that a pure separable frequency shifted beam can be obtained even when less than half wave voltage is applied. (orig.) [de

  7. Future electro-optical sensors and processing in urban operations

    NARCIS (Netherlands)

    Grönwall, C.; Schwering, P.B.; Rantakokko, J.; Benoist, K.W.; Kemp, R.A.W.; Steinvall, O.; Letalick, D.; Björkert, S.

    2013-01-01

    In the electro-optical sensors and processing in urban operations (ESUO) study we pave the way for the European Defence Agency (EDA) group of Electro-Optics experts (IAP03) for a common understanding of the optimal distribution of processing functions between the different platforms. Combinations of

  8. Electro-optical hybrid slip ring

    Science.gov (United States)

    Hong, En

    2005-11-01

    The slip ring is a rotary electrical interface, collector, swivel or rotary joint. It is a physical system that can perform continuous data transfer and data exchange between a stationary and a rotating structure. A slip ring is generally used to transfer data or power from an unrestrained, continuously rotating electro-mechanical system in real-time, thereby simplifying operations and eliminating damage-prone wires dangling from moving joints. Slip rings are widely used for testing, evaluating, developing and improving various technical equipment and facilities with rotating parts. They are widely used in industry, especially in manufacturing industries employing turbo machinery, as in aviation, shipbuilding, aerospace, defense, and in precise facilities having rotating parts such as medical Computerized Tomography (CT) and MRI scanners and so forth. Therefore, any improvement in slip ring technology can impact large markets. Research and development in this field will have broad prospects long into the future. The goal in developing the current slip ring technology is to improve and increase the reliability, stability, anti-interference, and high data fidelity between rotating and stationary structures. Up to now, there have been numerous approaches used for signal and data transfer utilizing a slip ring such as metal contacts, wires, radio transmission, and even liquid media. However, all suffer from drawbacks such as data transfer speed limitations, reliability, stability, electro-magnetic interference and durability. The purpose of the current research is to break through these basic limitations using an optical solution, thereby improving performance in current slip ring applications. This dissertation introduces a novel Electro-Optical Hybrid Slip Ring technology, which makes "through the air" digital-optical communication between stationary and rotating systems a reality with high data transfer speed, better reliability and low interference susceptibility

  9. Linear electro-optic effects in liquid crystals

    Science.gov (United States)

    Lagerwall, Sven T.; Stebler, Bengt

    1995-08-01

    The liquid crystal electro-optic effects which are linear in their coupling to an electric field are reviewed. These effects are found in materials which intrinsically, or in their configuration, lack mirror symmetry and may be divided into two main classes, in which the response- variable itself (for instance the induced tilt of the optic axis) is a linear or nonlinear function of the field. Whether the basic coupling is ferroelectric, paraelectric (dielectric) or flexoelectric in origin, the effects have essentially the same symmetry properties and show remarkable similarities in their device performance. While the first devices are beginning to emerge, these effects in particular constitute a considerable potential for future exploitation, based on their unique properties. Our examples discussed in this paper include para-, ferro-, antiferro-, and flexoelectric devices in chiral nematic and smectic (N*, A*, C*) phases. Among these the ferroelectric and antiferroelectric devices stand out as being particularly powerful and promising.

  10. Photoinduced electro-optics measurements of biosilica transformation to cristobalite

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, Ido [Department of Chemistry and the Institute of Nanotechnology, Bar-Ilan University, Ramat-Gan 52900 (Israel); Aluma, Yaniv; Ilan, Micha [Department of Zoology, George S. Wise Faculty of Life Sciences, Tel Aviv University, Tel Aviv 6997801 (Israel); Kityk, Iwan [Institute of Electronic Systems, Faculty of Electrical Engineering, Czestochowa University, Czestochowa 42-201 (Poland); Mastai, Yitzhak, E-mail: Yitzhak.Mastai@biu.ac.il [Department of Chemistry and the Institute of Nanotechnology, Bar-Ilan University, Ramat-Gan 52900 (Israel)

    2015-03-15

    In this paper we studied the photoinduced electro optics effects in the thermal transformation process of biosilica to cristobalite, at a relatively low temperature and ambient pressure. This process was characterized by a variety of standards techniques with emphasis on linear electro optic effect measurements. Overall we demonstrated that photoinduced electro optics measurements are very sensitive to the transformation from amorphous structure of silica in the natural sponge samples to laminar string morphology of cristobalite. With this technique we could probe the change in the samples chirality from achiral bio silica to chiral cristobalite structure. Furthermore it is shown that natural biosilica have photoinduced linear electro optics respond indicating the chiral natural of biosilica. - Graphical abstract: The phase transformation of biosilica from marine sponges to Cristobalite under thermal treatment was investigated using photoinduced electro optics measurements. The figure shows the changes of the electro-optic coefficient of cristobalite and biosilica. - Highlights: • We examine phase transformation of biosilica. • We report transition from amorphous biosilica to crystalline Cristobalite. • Biosilica transformation to Cristobalite at temperature of 850 °C. • Biosilica transformation is studied with photoinduced measurements. • We examine changes in the photoinduced linear electro optics properties.

  11. Barium Titanate Photonic Crystal Electro-Optic Modulators for Telecommunication and Data Network Applications

    Science.gov (United States)

    Girouard, Peter D.

    The microwave, optical, and electro-optic properties of epitaxial barium titanate thin films grown on (100) MgO substrates and photonic crystal electro-optic modulators fabricated on these films were investigated to demonstrate the applicability of these devices for telecommunication and data networks. The electrical and electro-optical properties were characterized up to modulation frequencies of 50 GHz, and the optical properties of photonic crystal waveguides were determined for wavelengths spanning the optical C band between 1500 and 1580 nm. Microwave scattering parameters were measured on coplanar stripline devices with electrode gap spacings between 5 and 12 mum on barium titanate films with thicknesses between 230 and 680 nm. The microwave index and device characteristic impedance were obtained from the measurements. Larger (lower) microwave indices (impedances) were obtained for devices with narrower electrode gap spacings and on thicker films. Thinner film devices have both lower index mismatch between the co-propagating microwave and optical signals and lower impedance mismatch to a 50O system, resulting in a larger predicted electro-optical 3 dB bandwidth. This was experimentally verified with electro-optical frequency response measurements. These observations were applied to demonstrate a record high 28 GHz electro-optic bandwidth measured for a BaTiO3 conventional ridge waveguide modulator having 1mm long electrodes and 12 mum gap spacing on a 260nm thick film. The half-wave voltage and electro-optic coefficients of barium titanate modulators were measured for films having thicknesses between 260 and 500 nm. The half-wave voltage was directly measured at low frequencies using a polarizer-sample-compensator-analyzer setup by over-driving waveguide integrated modulators beyond their linear response regime. Effective in-device electro-optic coefficients were obtained from the measured half-wave voltages. The effective electro-optic coefficients were

  12. Electro-Optic Imaging Fourier Transform Spectral Polarimeter, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Boulder Nonlinear Systems, Inc. (BNS) proposes to develop an Electro-Optic Imaging Fourier Transform Spectral Polarimeter (E-O IFTSP). The polarimetric system is...

  13. Electro-optic methods for longitudinal bunch diagnostics at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Steffen, B.R.

    2007-07-15

    Precise measurements of the temporal profile of sub-picosecond electron bunches are of high interest for the optimization and operation of VUV and X-ray free electron lasers. In this thesis, the shortest electro-optic signals measured so far for electron bunch diagnostics are presented, reaching a time resolution of better than 50 fs (rms). The e ects that introduce signal distortions and limit the time resolution are studied in numerical simulations for different electro-optic detection materials and techniques. The time resolution is mainly limited by lattice resonances of the electro-optic crystal. Electro-optic signals as short as 54 fs (rms) are obtained with gallium phosphide (GaP) crystals in a crossed polarizer detection scheme using temporally resolved electro-optic detection. Measuring near crossed polarization, where the electro-optic signal is proportional to the velocity field of the relativistic electron bunch, the shortest obtained signal width is 70 fs (rms). The electro-optic signals are compared to electron bunch shapes that are measured simultaneously with a transverse deflecting structure with 20 fs resolution. Numerical simulations using the bunch shapes as determined with the transverse deflecting cavity as input data are in excellent agreement with electro-optical signals obtained with GaP, both for temporally and spectrally resolved measurements. In the case of zinc telluride (ZnTe) the observed signals are slightly broader and significantly smaller than expected from simulations. These discrepancies are probably due to the poor optical quality of the available ZnTe crystals. (orig.)

  14. Electro-optic methods for longitudinal bunch diagnostics at FLASH

    International Nuclear Information System (INIS)

    Steffen, B.R.

    2007-07-01

    Precise measurements of the temporal profile of sub-picosecond electron bunches are of high interest for the optimization and operation of VUV and X-ray free electron lasers. In this thesis, the shortest electro-optic signals measured so far for electron bunch diagnostics are presented, reaching a time resolution of better than 50 fs (rms). The e ects that introduce signal distortions and limit the time resolution are studied in numerical simulations for different electro-optic detection materials and techniques. The time resolution is mainly limited by lattice resonances of the electro-optic crystal. Electro-optic signals as short as 54 fs (rms) are obtained with gallium phosphide (GaP) crystals in a crossed polarizer detection scheme using temporally resolved electro-optic detection. Measuring near crossed polarization, where the electro-optic signal is proportional to the velocity field of the relativistic electron bunch, the shortest obtained signal width is 70 fs (rms). The electro-optic signals are compared to electron bunch shapes that are measured simultaneously with a transverse deflecting structure with 20 fs resolution. Numerical simulations using the bunch shapes as determined with the transverse deflecting cavity as input data are in excellent agreement with electro-optical signals obtained with GaP, both for temporally and spectrally resolved measurements. In the case of zinc telluride (ZnTe) the observed signals are slightly broader and significantly smaller than expected from simulations. These discrepancies are probably due to the poor optical quality of the available ZnTe crystals. (orig.)

  15. Applications of lasers and electro-optics

    International Nuclear Information System (INIS)

    Tan, B.C.; Low, K.S.; Chen, Y.H.; Harith bin Ahmad; Tou, T.Y.

    1994-01-01

    Supported by the IRPA Programme on Laser Technology and Applications, many types of lasers have been designed, constructed and applied in various areas of science, medicine and industries. Amongst these lasers constructed were high power carbon dioxide lasers, rare gas halide excimer lasers, solid state Neodymium-YAG lasers, nitrogen lasers, flashlamp pumped dye lasers and nitrogen and excimer laser pumped dye lasers. These lasers and the associated electro-optics system, some with computer controlled, are designed and developed for the following areas of applications: 1. Industrial applications of high power carbon dioxide lasers for making of i.c. components and other materials processing purposes. Prototype operational systems have been developed. 2. Medical applications of lasers for cancer treatment using the technique of photodynamic therapy. A new and more effective treatment protocol has been proposed. 3. Agricultural applications of lasers in palm oil and palm fruit-fluorescence diagnostic studies. Fruit ripeness signature has been developed and palm oil oxidation level were investigated. 4. Development of atmospheric pollution monitoring systems using laser lidar techniques. Laboratory scale systems were developed. 5. Other applications of lasers including laser holographic and interferometric methods for the non destructive testing of materials. The activities of the group (from 1988-1990) have resulted in the submission of a patent for a laser device, publication of many research paper sin local and overseas journals and conference proceedings, completion of 1 Ph.D. dissertation and 6 M. Phil theses. Currently (1991), a total of 3 Ph.D., 6 M. Phil research programmes are involved in this research and development programme

  16. Effective electro-optical modulation with high extinction ratio by a graphene-silicon microring resonator

    DEFF Research Database (Denmark)

    Ding, Yunhong; Zhu, Xiaolong; Xiao, Sanshui

    2015-01-01

    Graphene opens up for novel optoelectronic applications thanks to its high carrier mobility, ultra-large absorption bandwidth, and extremely fast material response. In particular, the opportunity to control optoelectronic properties through tuning of the Fermi level enables electro-optical modula...... with an extinction ratio of 3.8 dB is successfully demonstrated by applying a square-waveform with a 4 V peak-to-peak voltage....

  17. Electro-optical measurements of 3D-stc detectors fabricated at ITC-irst

    Energy Technology Data Exchange (ETDEWEB)

    Zoboli, Andrea [INFN and Department of ICT, University of Trento, via Sommarive, 14 - 38050 Povo di Trento (Italy)], E-mail: zoboli@dit.unitn.it; Boscardin, Maurizio [ITC-irst, Microsystems Division, via Sommarive, 18 - 38050 Povo di Trento (Italy); Bosisio, Luciano [INFN and Department of Physics, University of Trieste, via A. Valerio, 2 - 34127 Trieste (Italy); Dalla Betta, Gian-Franco [INFN and Department of ICT, University of Trento, via Sommarive, 14 - 38050 Povo di Trento (Italy); Piemonte, Claudio; Pozza, Alberto; Ronchin, Sabina; Zorzi, Nicola [ITC-irst, Microsystems Division, via Sommarive, 18 - 38050 Povo di Trento (Italy)

    2007-12-11

    In the past two years 3D silicon radiation detectors have been developed at ITC-irst (Trento, Italy). As a first step toward full 3D devices, simplified structures featuring columnar electrodes of one doping type only were fabricated. This paper reports the electro-optical characterization of 3D test diodes made with this approach. Experimental results and TCAD simulations provide good insight into the charge collection mechanism and response speed limitation of these structures.

  18. Theory-inspired development of organic electro-optic materials

    International Nuclear Information System (INIS)

    Dalton, Larry R.

    2009-01-01

    Real-time, time-dependent density functional theory (RTTDDFT) and pseudo-atomistic Monte Carlo-molecular dynamics (PAMCMD) calculations have been used in a correlated manner to achieve quantitative definition of structure/function relationships necessary for the optimization of electro-optic activity in organic materials. Utilizing theoretical guidance, electro-optic coefficients (at telecommunication wavelengths) have been increased to 500 pm/V while keeping optical loss to less than 2 dB/cm. RTTDDFT affords the advantage of permitting explicit treatment of time-dependent electric fields, both applied fields and internal fields. This modification has permitted the quantitative simulation of the variation of linear and nonlinear optical properties of chromophores and the electro-optic activity of materials with optical frequency and dielectric permittivity. PAMCMD statistical mechanical calculations have proven an effective means of treating the full range of spatially-anisotropic intermolecular electrostatic interactions that play critical roles in defining the degree of noncentrosymmetric order that is achieved by electric field poling of organic electro-optic materials near their glass transition temperatures. New techniques have been developed for the experimental characterization of poling-induced acentric order including a modification of variable angle polarization absorption spectroscopy (VAPAS) permitting a meaningful correlation of theoretical and experimental data related to poling-induced order for a variety of complex organic electro-optic materials.

  19. Active material, optical mode and cavity impact on nanoscale electro-optic modulation performance

    Science.gov (United States)

    Amin, Rubab; Suer, Can; Ma, Zhizhen; Sarpkaya, Ibrahim; Khurgin, Jacob B.; Agarwal, Ritesh; Sorger, Volker J.

    2017-10-01

    Electro-optic modulation is a key function in optical data communication and possible future optical compute engines. The performance of modulators intricately depends on the interaction between the actively modulated material and the propagating waveguide mode. While a variety of high-performance modulators have been demonstrated, no comprehensive picture of what factors are most responsible for high performance has emerged so far. Here we report the first systematic and comprehensive analytical and computational investigation for high-performance compact on-chip electro-optic modulators by considering emerging active materials, model considerations and cavity feedback at the nanoscale. We discover that the delicate interplay between the material characteristics and the optical mode properties plays a key role in defining the modulator performance. Based on physical tradeoffs between index modulation, loss, optical confinement factors and slow-light effects, we find that there exist combinations of bias, material and optical mode that yield efficient phase or amplitude modulation with acceptable insertion loss. Furthermore, we show how material properties in the epsilon near zero regime enable reduction of length by as much as by 15 times. Lastly, we introduce and apply a cavity-based electro-optic modulator figure of merit, Δλ/Δα, relating obtainable resonance tuning via phase shifting relative to the incurred losses due to the fundamental Kramers-Kronig relations suggesting optimized device operating regions with optimized modulation-to-loss tradeoffs. This work paves the way for a holistic design rule of electro-optic modulators for high-density on-chip integration.

  20. Strained silicon as a new electro-optic material

    DEFF Research Database (Denmark)

    Jacobsen, Rune Shim; Andersen, Karin Nordström; Borel, Peter Ingo

    2006-01-01

    functionalities can be integrated into monolithic components based on the versatile silicon platform, is due to the limited active optical properties of silicon3. Recently, however, a continuous-wave Raman silicon laser was demonstrated4; if an effective modulator could also be realized in silicon, data...... processing and transmission could potentially be performed by all-silicon electronic and optical components. Here we have discovered that a significant linear electro-optic effect is induced in silicon by breaking the crystal symmetry. The symmetry is broken by depositing a straining layer on top...... of a silicon waveguide, and the induced nonlinear coefficient, (2) 15 pm V-1, makes it possible to realize a silicon electro-optic modulator. The strain-induced linear electro-optic effect may be used to remove a bottleneck5 in modern computers by replacing the electronic bus with a much faster optical...

  1. Embodiment of Learning in Electro-Optical Signal Processors.

    Science.gov (United States)

    Hermans, Michiel; Antonik, Piotr; Haelterman, Marc; Massar, Serge

    2016-09-16

    Delay-coupled electro-optical systems have received much attention for their dynamical properties and their potential use in signal processing. In particular, it has recently been demonstrated, using the artificial intelligence algorithm known as reservoir computing, that photonic implementations of such systems solve complex tasks such as speech recognition. Here, we show how the backpropagation algorithm can be physically implemented on the same electro-optical delay-coupled architecture used for computation with only minor changes to the original design. We find that, compared to when the backpropagation algorithm is not used, the error rate of the resulting computing device, evaluated on three benchmark tasks, decreases considerably. This demonstrates that electro-optical analog computers can embody a large part of their own training process, allowing them to be applied to new, more difficult tasks.

  2. Building electro-optical systems making it all work

    CERN Document Server

    Hobbs, Philip C D

    2009-01-01

    Praise for the First Edition ""Now a new laboratory bible for optics researchers has joined the list: it is Phil Hobbs's Building Electro-Optical Systems: Making It All Work.""-Tony Siegman, Optics & Photonics News Building a modern electro-optical instrument may be the most interdisciplinary job in all of engineering. Be it a DVD player or a laboratory one-off, it involves physics, electrical engineering, optical engineering, and computer science interacting in complex ways. This book will help all kinds of technical people sort through the complexit

  3. Electro-optical effects in porous PET films filled with liquid crystal: new possibilities for fiber optics and THZ applications.

    Science.gov (United States)

    Chopik, A; Pasechnik, S; Semerenko, D; Shmeliova, D; Dubtsov, A; Srivastava, A K; Chigrinov, V

    2014-03-15

    The results of investigation of electro-optical properties of porous polyethylene terephthalate films filled with a nematic liquid crystal (5 CB) are presented. It is established that the optical response of the samples on the applied voltage drastically depends on the frequency range. At low frequencies of applied electrical field (foptical response arises as an impulse of light intensity, which decays for the time essentially shorter than the electric pulse duration. At high frequencies (f>fc) electric field induces an overall change in the light intensity, which is typical for an electro-optical response of a liquid crystal (LC) layer in a conventional "sandwich"-like cell. The dependences of critical frequency fc, threshold voltages, and characteristic times on a pore diameter d were established. The peculiarities of electro-optical effects can be explained in the framework of the approach which connects the variations of light intensity with the corresponding changes of the effective refractive index n(eff) of a composite LC media. The unusual behavior of the electro-optical response at low frequencies is assigned to the orienting action of the specific shear flow typical for electrokinetic phenomena in polar liquids.

  4. Electro-Optical Characterization of Bistable Smectic A Liquid Crystal Displays

    Science.gov (United States)

    Buyuktanir, Ebru Aylin

    My dissertation focuses the characterization and optimization of the electro-optical properties of smectic A (SmA) based liquid crystal (LC) displays. I present the development of robust and flexible bistable SmA LC displays utilizing polymer dispersed liquid crystal (PDLC) technology. The SmA PDLC displays produced on plastic substrates present electrically reversible memory, high contrast ratio, paper-like sunlight readability, and wide viewing angle characteristics. In order to optimize the SmA PDLC display, I investigated polymerization conditions, such as polymer concentration effect, polymerization temperature, and UV-light intensity variations. I characterized the electro-optical responses-such as static-response, time-response, threshold characteristics, and contrast ratio values' of the optimized SmA PDLC display and compared them to those of the pure SmA LC. The best electro-optical performance of SmA PDLC formulation was obtained using the combination of low mW/cm 2 and high mW/cm2 UV-light curing intensity. The contrast ratio of the optimum SmA PDLC at a 5o collection angle was 83% of that of the pure SmA material on plastic substrates. I fabricated 2.5 x 2.5 in., 4 x 4 in., and 6 x 6 in. sized monochrome flexible SmA PDLC displays, as well as red, yellow, and fluorescent dyes colored SmA PDLC displays on plastic substrates. The electro-optic performance of the bistable SmA LC display consisting of a patterned field-induced polymer wall infrastructure was also studied and compared to those of pure SmA material. I found that the contrast ratio of the SmA LC encapsulated between polymer walls was much greater than that of the SmA PDLC system, approaching the contrast ratio value of the pure SmA material. I also improved the electro-optical characteristics of bistable SmA LC displays by adding ferroparticles into the system. Finally, I illustrated the unique capabilities of polarized confocal Raman microscopy (CRM) to resolve the orientational order of Sm

  5. Electro-optic side-chain polyimide system with large optical nonlinearity and high thermal stability

    Science.gov (United States)

    Sotoyama, Wataru; Tatsuura, Satoshi; Yoshimura, Tetsuzo

    1994-04-01

    We report electro-optic (EO) efficiency and thermal stability of a poled polyimide system with nonlinear optical dyes as side chains. The side-chain polyimide system is synthesized from a dianhydride containing azobenzene dye and a diamine. The dye in the polymer is chemically stable for temperatures below 250 °C. The polymer can be poled simultaneously with or after imidization of the polyamic acid. Our sample poled after imidization shows a large EO coefficient (r33=10.8 pm/V at λ=1.3 μm) and long-term thermal stability at 120 °C.

  6. Electro-optical properties of tetragonal KNbO3

    Indian Academy of Sciences (India)

    Solid State Physics Division, Bhabha Atomic Research Centre, Trombay,. Mumbai 400 085, India. E-mail: psastry@apsara.barc.ernet.in. MS received 12 November 2006; revised 6 March 2007; accepted 16 March 2007. Abstract. Linear electro-optical tensor coefficients and optical susceptibility of tetrag- onal KNbO3 are ...

  7. Asymmetric Threat Assessment Using Electro-Optical Image Systems

    NARCIS (Netherlands)

    Schwering, P.B.W.; Schutte, K.

    2010-01-01

    Asymmetric threat assessment from military platforms, including early detection and classification by electro-optical means, is a complicated matter. These threats can be for instance explosives-packed rubber boats, minecarrying swimmers and divers in a marine environment or terrorists, improvised

  8. Photodefinable electro-optic polymers for high speed modulators

    NARCIS (Netherlands)

    Faccini, M.; Balakrishnan, M.; Diemeer, Mart; Leinse, Arne; Verboom, Willem; Driessen, A.; Reinhoudt, David

    2006-01-01

    We present a series of polymeric electro-optic (EO) materials based on the tricyanovinylidenediphenylaminobenzene (TCVDPA) chromophore which exhibits an exceptionally high photostability combined with a high EO activity. The EO properties of these derivatives are given and the best result was

  9. Electro-optical properties, decomposition pathways and the ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 5. Electro-optical properties, decomposition pathways and the hydrostatic pressure-dependent behaviours of a double-cation hydrogen storage material of Al 3 Li 4 (BH 4 ) 13. MEHMET SIMSEK. Volume 40 Issue 5 September 2017 pp 907-915 ...

  10. Conoscopic interferometry for probing electro-optic coefficients of strontium calcium barium niobate crystal

    Science.gov (United States)

    Wang, Ankai; Gao, CH. Y.; Xu, J. Q.; Zhang, H. J.; Sun, Sh. Q.

    2011-07-01

    The relation between the linear electro-optic effect and conoscopic interference has been investigated in a biased electro-optic crystal strontium calcium barium niobate (CSBN). Based on the change of interference patterns with applied field, an interferometric method for probing electro-optic coefficients of electro-optic crystals has been proposed. In our case, the linear electro-optic coefficients of CSBN:50 was first probed at γ33=(141.0±0.5)×10 -12 m/V and γ13=(85.0±0.5)×10 -12 m/V.

  11. Construction of a DNA Origami Based Molecular Electro-optical Modulator.

    Science.gov (United States)

    Wang, Xiao; Li, Chen; Niu, Dong; Sha, Ruojie; Seeman, Nadrian C; Canary, James W

    2018-03-14

    An electro-optical modulator was constructed using a DNA nanostructure scaffold with oligomers of poly(phenylenevinylene) and polyaniline. A molecular device containing one each of the functional molecules was assembled in a DNA origami. The constructs formed an "X" shape and were visualized by atomic force microscopy. In response to redox reconfiguration, the device reversibly altered fluorescence signal output. This molecular self-assembly strategy provides opportunities to make unique material composites that are difficult to achieve by blending. The strategy offers a "plug and play" format that may lead to many new functions.

  12. Characteristics of Electro-Optic Device Using Conducting Polymers, Polythiophene and Polypyrrole Films

    Science.gov (United States)

    Kaneto, Keiichi; Yoshino, Katsumi; Inuishi, Yoshio

    1983-07-01

    Detailed characteristics of electro-optic elements (color switching and memory) utilizing the spectral change of conducting polymers by electrochemical doping and undoping are studied. The response time of color switching, for example, red≤ftrightarrowblue in polythiophene film in the electrolyte of LiBF4/acetonitrile is 30˜100 msec under the applied voltages of -2.0{≤ftrightarrow}+4.0 V vs. Li plate. More than 103 cycles of color switch are observed quite reproducibly. Three color states of yellow green, dark brown and blue are demonstrated for polypyrrole film.

  13. Electro-optical characterization system develped for ATLIDCAS AIV: flat field and collimated beam injections

    Science.gov (United States)

    Ramos, G.; Laguna, H.; Torres, J.; Belenguer, T.

    2017-11-01

    In the framework of the ESA EarthCare Mission, an atmospheric LIDAR (ATLID) was included as a payload. CAS is the co-alignment system of such a LIDAR instrument, the system responsible of guaranteeing the proper alignment of the projected laser beam and the reflected light collected. Within CAS, in which a consortium leaded by ASTRIUM France is working in, as well as CRISA (electronics) and LIDAX (mechanical engineering), INTA is in charge of the development of the instrumentation to be used on ground (on ground support equipments, OGSEs) needed for the proper electro-optical characterization.

  14. Electro-optic techniques in electron beam diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    van Tilborg, Jeroen; Toth, Csaba; Matlis, Nicholas; Plateau, Guillaume; Leemans, Wim

    2011-06-17

    Electron accelerators such as laser wakefield accelerators, linear accelerators driving free electron lasers, or femto-sliced synchrotrons, are capable of producing femtosecond-long electron bunches. Single-shot characterization of the temporal charge profile is crucial for operation, optimization, and application of such accelerators. A variety of electro-optic sampling (EOS) techniques exists for the temporal analysis. In EOS, the field profile from the electron bunch (or the field profile from its coherent radiation) will be transferred onto a laser pulse co-propagating through an electro-optic crystal. This paper will address the most common EOS schemes and will list their advantages and limitations. Strong points that all techniques share are the ultra-short time resolution (tens of femtoseconds) and the single-shot capabilities. Besides introducing the theory behind EOS, data from various research groups is presented for each technique.

  15. Electro-optical sensor with automatic suppression of laser dazzling

    Science.gov (United States)

    Ritt, G.; Eberle, B.

    2012-10-01

    The progress in laser technology leads to very compact but nevertheless powerful laser sources. In the visible and near infrared spectral region, lasers of any wavelength can be purchased. Especially continuous wave laser sources pose a serious threat to the human eye and electro-optical sensors due to their high proliferation and easy availability. The manifold of wavelengths cannot be encountered by conventional safety measures like absorption or interference filters. We present a protection concept for electro-optical sensors to suppress dazzling in the visible spectral region. The key element of the concept is the use of a digital micromirror device (DMD) in combination with wavelength multiplexing. This approach allows selective spectral filtering in defined regions of interest in the scene. The system offers the possibility of automatic attenuation of dazzling laser radiation. An anti-dazzle algorithm comprises the analysis of the laser wavelength and the subsequent activation of the appropriate micromirrors of the DMD.

  16. Linear electro-optical behavior of hybrid nanocomposites based on silicon carbide nanocrystals and polymer matrices

    Science.gov (United States)

    Bouclé, J.; Kassiba, A.; Makowska-Janusik, M.; Herlin-Boime, N.; Reynaud, C.; Desert, A.; Emery, J.; Bulou, A.; Sanetra, J.; Pud, A. A.; Kodjikian, S.

    2006-11-01

    An electro-optical activity has been recently reported for hybrid nanocomposite thin films where inorganic silicon carbide nanocrystals (ncSiC) are incorporated into polymer matrices. The role of the interface SiC polymer is suggested as the origin of the observed second order nonlinear optical susceptibility in the hybrid materials based on poly-(methylmethacrylate) (PMMA) or poly-( N -vinylcarbazole) matrices. In this work, we report an analysis of the electro-optical response of this hybrid system as a function of the ncSiC content and surface state in order to precise the interface effect in the observed phenomenon. Two specific ncSiC samples with similar morphology and different surface states are incorporated in the PMMA matrix. The effective Pockels parameters of the corresponding hybrid nanocomposites have been estimated up to 7.59±0.74pm/V ( 1wt.% of ncSiC in the matrix). The interfacial region ncSiC polymer is found to play the main role in the observed effect. Particularly, the electronic defects on the ncSiC nanocrystal surface modify the interfacial electrical interactions between the two components. The results are interpreted and discussed on the basis of the strong influence of these active centers in the interfacial region at the nanoscale, which are found to monitor the local hyperpolarizabilities and the macroscopic nonlinear optical susceptibilities. This approach allows us to complete the description and understanding of the electro-optical response in the hybrid SiC /polymer systems.

  17. Contribution of electro-optics to plasma research

    International Nuclear Information System (INIS)

    Dillet, A.; Jacquot, C.; Stevenin, P.

    1967-01-01

    Two electro-optical devices useful for plasma diagnostic are described. The first includes two image converters and is able to record any luminous transient phenomenon (for instance, fast spectrography) with a photon gain sufficient to distinguish the physically observable luminous thresholds. The second makes use of the Faraday effect to measure magnetic fields without perturbation. A fast device has a pass band up to 30 MHz. A slower one can detect the '' of arc. (authors) [fr

  18. Theory-inspired development of organic electro-optic materials.

    Science.gov (United States)

    Sullivan, Philip A; Dalton, Larry R

    2010-01-19

    Correlated time-dependent density functional theory (TDDFT) quantum mechanical and pseudo-atomistic Monte Carlo (PAMC) statistical mechanical methods have been used to assist in the understanding of and to guide the improvement of organic electro-optic (OEO) materials, prepared by electric field poling of pi-electron chromophore-containing materials near their glass transition temperature. Theoretical treatment of the effects of dielectric permittivity and optical frequency on molecular (chromophore) first hyperpolarizabilities has been carried out as well as the analysis of the influence of spatially anisotropic intermolecular electrostatic interactions on the poling-induced noncentrosymmetric order of chromophores. Three classes of OEO materials have been considered in correlated theoretical and experimental investigations: (1) traditional chromophore/polymer composite materials, (2) chromophores covalently incorporated into polymers, dendrimers, and dendronized polymers, and (3) recently discovered materials consisting of chromophores incorporated into chromophore-containing host materials. This latter class of materials is referred to as binary chromophore organic glasses (BCOGs). These BCOGs exhibit exceptional electro-optic activity because of a combination of high chromophore number density, the effect of high dielectric permittivity on molecular first hyperpolarizability, and improved acentric order arising from the intermolecular electrostatic interactions among the two types of chromophores. The electrical conductivity of materials can also influence achievable electro-optic activity, and thin metal oxide buffer layers, introduced to limit charge injection, can significantly improve poling efficiency. Chromophore order can also be influenced, in some cases, by novel processing techniques, such as laser-assisted electric field poling. Thermal and photostability are important parameters for practical application of materials and have been improved

  19. Magneto-optic and electro-optic modulators

    International Nuclear Information System (INIS)

    Hutchinson, D.P.; Ma, C.H.; Price, T.R.; Staats, P.A.; Sluis, K.L.V.

    1982-01-01

    An important aspect of the Faraday rotation diagnostic for tokamak plasma measurement has been the development of suitable polarization modulators for submillimeter wavelength. The problems are to obtain high optical transmission and fast modulation frequencies. In ORNL, the authors have developed both a magneto-optic and an electro-optic submillimeter-wave modulators. These devices have been operated at modulation frequency of approximately 100 kHz, and both have high transmission. The original magneto-optic modulator consists of a 3 mm thick by 1.4 cm diameter 2-111 ferrite disk mounted at the center of an air core coil. Recently, a new ferrite modulator has been tested, which allows a much higher modulation frequency than the original device. A laboratory set-up designed to simulate a plasma heterodyne interferometer/polarimeter experiment has been used to determine the modulator characteristics. A mechanical polarization rotor was used to simulate the rotation by plasma. The transmission of the ferrite disk was 80 % at a wavelength of 0.447 mm. The authors have also performed preliminary measurement on an electro-optic modulator first demonstrated by Fetterman at Lincoln Laboratory, U.S. This device is a classical electro-optic modulator using a cryogenically cooled (4.2 K) LiTaO 3 crystal. Experiments are underway to determine the electro-optic properties of the crystal over the temperature range from 4.2 K to 77 K and over the range of wavelength from 0.118 mm to 0.447 mm. (Wakatsuki, Y.)

  20. Electro-optical sensor with automatic suppression of laser dazzling

    OpenAIRE

    Ritt, Gunnar; Eberle, Bernd

    2012-01-01

    The progress in laser technology leads to very compact but nevertheless powerful laser sources. In the visible and near infrared spectral region, lasers of any wavelength can be purchased. Especially continuous wave laser sources pose a serious threat to the human eye and electro-optical sensors due to their high proliferation and easy availability. The manifold of wavelengths cannot be encountered by conventional safety measures like absorption or interference filters. We present a protectio...

  1. Thermal management evaluation of the complex electro-optical system

    Directory of Open Access Journals (Sweden)

    Nijemčević Srećko S.

    2017-01-01

    Full Text Available The thermal management of a complex electro-optical system aimed for outdoor application is challenging task due to the requirement of having an air-sealed enclosure, harsh working environment, and an additional thermal load generated by sunlight. It is essential to consider the effect of heating loads in the system components, as well as the internal temperature distribution, that can have influence on the system life expectancy, operational readiness and parameters, and possibility for catastrophic failure. The main objective of this paper is to analyze internal temperature distribution and evaluate its influence on system component operation capability. The electro-optical system simplified model was defined and related thermal balance simulation model based on Solid Works thermal analysis module was set and applied for temperature distribution calculation. Various outdoor environment scenarios were compared to evaluate system temperature distribution and evaluate its influence on system operation, reliability, and life time in application environment. This work was done during the design process as a part of the electro-optical system optimization. The results show that temperature distribution will not be cause for catastrophic failure and malfunction operation during operation in the expected environment.

  2. Effect of temperature on the morphology and electro-optical properties of liquid crystal physical gel

    International Nuclear Information System (INIS)

    Leaw, W.L.; Mamat, C.R.; Triwahyono, S.; Jalil, A.A.; Bidin, N.

    2016-01-01

    Liquid crystal physical gels were (thermally) prepared with cholesteryl stearate as a gelator in nematic liquid crystal, 4-cyano-4′-pentylbiphenyl. The electro-optical performance of liquid crystal physical gels is almost entirely dependent on the gels' inherent morphology. This study involved an empirical investigation of the relationships among all of the gelation temperature, morphology, and electro-optical properties. Besides continuous cooling at room temperature, isothermal cooling was also performed at both 18 and 0 °C, corresponding to near-solid and solid phases of 4-cyano-4′-pentylbiphenyl respectively. Nevertheless, the liquid crystal physical gel was also isothermally rapidly cooled using liquid nitrogen. Polarizing optical microscopy showed that the gel structure became thinner when isothermal cooling was carried out. These thinner gel aggregates then interconnected to form larger liquid crystal domains. Moreover, it was also revealed that the gel networks were randomized. Electron spin resonance results showed that the liquid crystal director orientation was severely randomized in the presence of gel networks. Conversely, isothermal cooling using liquid nitrogen generated a higher liquid crystal director orientation order. The 6.0 wt% cholesteryl stearate/4-cyano-4′-pentylbiphenyl physical gel that was isothermally cooled using liquid nitrogen showed the lowest response time in a twisted nematic mode optical cell. - Graphical abstract: Liquid crystal physical gel was prepared using nematic liquid crystal, 4-cyano-4′-pentylbiphenyl and cholesteryl stearate as gelator. Isothermal cooling at lower temperature produced thinner gel network and larger liquid crystal domain. - Highlights: • 5CB nematic liquid crystal was successfully gelled by cholesteryl stearate gelator. • The morphology of gel network was controlled by different cooling conditions. • Thinner gel network was formed by the rapid cooling using liquid nitrogen.

  3. Effect of temperature on the morphology and electro-optical properties of liquid crystal physical gel

    Energy Technology Data Exchange (ETDEWEB)

    Leaw, W.L. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Mamat, C.R., E-mail: che@kimia.fs.utm.my [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Triwahyono, S. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Jalil, A.A. [Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Centre of Hydrogen Energy, Institute of Future Energy, Univerisiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia); Bidin, N. [Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310, UTM Johor Bahru, Johor (Malaysia)

    2016-12-01

    Liquid crystal physical gels were (thermally) prepared with cholesteryl stearate as a gelator in nematic liquid crystal, 4-cyano-4′-pentylbiphenyl. The electro-optical performance of liquid crystal physical gels is almost entirely dependent on the gels' inherent morphology. This study involved an empirical investigation of the relationships among all of the gelation temperature, morphology, and electro-optical properties. Besides continuous cooling at room temperature, isothermal cooling was also performed at both 18 and 0 °C, corresponding to near-solid and solid phases of 4-cyano-4′-pentylbiphenyl respectively. Nevertheless, the liquid crystal physical gel was also isothermally rapidly cooled using liquid nitrogen. Polarizing optical microscopy showed that the gel structure became thinner when isothermal cooling was carried out. These thinner gel aggregates then interconnected to form larger liquid crystal domains. Moreover, it was also revealed that the gel networks were randomized. Electron spin resonance results showed that the liquid crystal director orientation was severely randomized in the presence of gel networks. Conversely, isothermal cooling using liquid nitrogen generated a higher liquid crystal director orientation order. The 6.0 wt% cholesteryl stearate/4-cyano-4′-pentylbiphenyl physical gel that was isothermally cooled using liquid nitrogen showed the lowest response time in a twisted nematic mode optical cell. - Graphical abstract: Liquid crystal physical gel was prepared using nematic liquid crystal, 4-cyano-4′-pentylbiphenyl and cholesteryl stearate as gelator. Isothermal cooling at lower temperature produced thinner gel network and larger liquid crystal domain. - Highlights: • 5CB nematic liquid crystal was successfully gelled by cholesteryl stearate gelator. • The morphology of gel network was controlled by different cooling conditions. • Thinner gel network was formed by the rapid cooling using liquid nitrogen.

  4. Nematicons and Their Electro-Optic Control: Light Localization and Signal Readdressing via Reorientation in Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Armando Piccardi

    2013-10-01

    Full Text Available Liquid crystals in the nematic phase exhibit substantial reorientation when the molecules are driven by electric fields of any frequencies. Exploiting such a response at optical frequencies, self-focusing supports transverse localization of light and the propagation of self-confined beams and waveguides, namely “nematicons”. Nematicons can guide other light signals and interact with inhomogeneities and other beams. Moreover, they can be effectively deviated by using the electro-optic response of the medium, leading to several strategies for voltage-controlled reconfiguration of light-induced guided-wave circuits and signal readdressing. Hereby, we outline the main features of nematicons and review the outstanding progress achieved in the last twelve years on beam self-trapping and electro-optic readdressing.

  5. Nematicons and their electro-optic control: light localization and signal readdressing via reorientation in liquid crystals.

    Science.gov (United States)

    Piccardi, Armando; Alberucci, Alessandro; Assanto, Gaetano

    2013-10-08

    Liquid crystals in the nematic phase exhibit substantial reorientation when the molecules are driven by electric fields of any frequencies. Exploiting such a response at optical frequencies, self-focusing supports transverse localization of light and the propagation of self-confined beams and waveguides, namely "nematicons". Nematicons can guide other light signals and interact with inhomogeneities and other beams. Moreover, they can be effectively deviated by using the electro-optic response of the medium, leading to several strategies for voltage-controlled reconfiguration of light-induced guided-wave circuits and signal readdressing. Hereby, we outline the main features of nematicons and review the outstanding progress achieved in the last twelve years on beam self-trapping and electro-optic readdressing.

  6. Determining the molecular origin of radiation damage/enhancement in electro-optic polymeric materials through polarized light microscopy

    Science.gov (United States)

    Perez-Moreno, Javier

    2014-09-01

    Previous studies on the radiation effects upon polymer and polymer-based photonic materials suggest that the radiation resistance of the material is heavily dependent on the choice of polymer-host and guest-chromophore. The best results to date have been achieved with electro optic polymeric materials based on CLD1 doped in APC, which has resulted in improved performance at the device level upon gamma-ray irradiation at moderate doses. Still, our understanding of the physical mechanisms behind the enhancement of the performance is unclear. In this paper, we discuss how polarized light microscopy could be used as a means to quantify the effect of the different physical parameters that influence the optical response of electro-optic polymeric thin film samples.

  7. Enhancement of polar anchoring strength in a graphene-nematic suspension and its effect on nematic electro-optic switching

    Science.gov (United States)

    Basu, Rajratan

    2017-07-01

    A small quantity of monolayer graphene flakes is doped in a nematic liquid crystal (LC), and the effective polar anchoring strength coefficient between the LC and the alignment substrate is found to increase by an order of magnitude. The hexagonal pattern of graphene can interact with the LC's benzene rings via π -π electron stacking, enabling the LC to anchor to the graphene surface homogeneously (i.e., planar anchoring). When the LC cell is filled with the graphene-doped LC, some graphene flakes are preferentially attached to the alignment layer and modify the substrate's anchoring property. These spontaneously deposited graphene flakes promote planar anchoring at the substrate and the polar anchoring energy at alignment layer is enhanced significantly. The enhanced anchoring energy is found to impact favorably on the electro-optic response of the LC. Additional studies reveal that the nematic electro-optic switching is significantly faster in the LC-graphene hybrid than that of the pure LC.

  8. Nanodoping: a route for enhancing electro-optic performance of bent core nematic system

    Science.gov (United States)

    Kumar, Pradeep; Debnath, Somen; Rao, Nandiraju V. S.; Sinha, Aloka

    2018-03-01

    We report the effect of dispersion of barium titanate (BaTiO3) nanoparticles (BNPs) in a four ring bent core nematic (BCN) liquid crystal. Polarizing optical microscopy reveals the presence of a single nematic phase in pure and doped states. Polar switching has been observed in the bent core system and the value of spontaneous polarization (P s) increases with increase in doping concentration of BNPs in BCN. Dielectric study shows a lower frequency mode, which can be ascribed to the formation of cybotactic clusters. These clusters are also responsible for the observed polar switching in pure, as well as, in doped BCNs. Another higher frequency mode, observed only in pure BCN, indicates the rotation of molecules about their long molecular axis. The conductivity of doped samples is also found to decrease as compared to the pure BCN. This reduction helps in the minimization of negative effects caused by free ions in liquid crystal based devices. This study demonstrates that the interaction between BNPs and BCN molecules improves the P s, dielectric behaviour, viscosity and reduces the conductivity of pure BCN. Hence, nanodoping in a BCN is an effective method for the enhancement of electro-optic performances and will lead to the development of faster electro-optic devices.

  9. Solid state electro-optic color filter and iris

    Science.gov (United States)

    1975-01-01

    A pair of solid state electro-optic filters (SSEF) in a binocular holder were designed and fabricated for evaluation of field sequential stereo TV applications. The electronic circuitry for use with the stereo goggles was designed and fabricated, requiring only an external video input. A polarizing screen suitable for attachment to various size TV monitors for use in conjunction with the stereo goggles was designed and fabricated. An improved engineering model 2 filter was fabricated using the bonded holder technique developed previously and integrated to a GCTA color TV camera. An engineering model color filter was fabricated and assembled using PLZT control elements. In addition, a ruggedized holder assembly was designed, fabricated and tested. This assembly provides electrical contacts, high voltage protection, and support for the fragile PLZT disk, and also permits mounting and optical alignment of the associated polarizers.

  10. Extending electro-optic detection to ultrashort electron beams

    Directory of Open Access Journals (Sweden)

    M. H. Helle

    2012-05-01

    Full Text Available We propose a technique to extend noninvasive electro-optic detection of relativistic electron beams to bunch lengths of ≃10  fs. This is made possible by detecting the frequency mixing that occurs between the optical probe and the space charge fields of the beam, while simultaneously time resolving the resulting mixed frequency signal. The necessary formalism to describe this technique is developed and numerical solutions for various possible experimental conditions are made. These solutions are then compared to simulation results for consistency. Finally, the method to reconstruct the original bunch profile from the proposed diagnostic is discussed and an example showing a 15 fs test beam reconstructed to within an accuracy of 15% is given.

  11. Design principles and realization of electro-optical circuit boards

    Science.gov (United States)

    Betschon, Felix; Lamprecht, Tobias; Halter, Markus; Beyer, Stefan; Peterson, Harry

    2013-02-01

    The manufacturing of electro-optical circuit boards (EOCB) is based to a large extent on established technologies. First products with embedded polymer waveguides are currently produced in series. The range of applications within the sensor and data communication markets is growing with the increasing maturity level. EOCBs require design flows, processes and techniques similar to existing printed circuit board (PCB) manufacturing and appropriate for optical signal transmission. A key aspect is the precise and automated assembly of active and passive optical components to the optical waveguides which has to be supported by the technology. The design flow is described after a short introduction into the build-up of EOCBs and the motivation for the usage of this technology within the different application fields. Basis for the design of EOCBs are the required optical signal transmission properties. Thereafter, the devices for the electro-optical conversion are chosen and the optical coupling approach is defined. Then, the planar optical elements (waveguides, splitters, couplers) are designed and simulated. This phase already requires co-design of the optical and electrical domain using novel design flows. The actual integration of an optical system into a PCB is shown in the last part. The optical layer is thereby laminated to the purely electrical PCB using a conventional PCB-lamination process to form the EOCB. The precise alignment of the various electrical and optical layers is thereby essential. Electrical vias are then generated, penetrating also the optical layer, to connect the individual electrical layers. Finally, the board has to be tested electrically and optically.

  12. Electro-optical memory of a nematic liquid crystal doped by multi-walled carbon nanotubes

    Directory of Open Access Journals (Sweden)

    L. Dolgov

    2012-10-01

    Full Text Available A pronounced irreversible electro-optical response (memory effect has been recently observed for nematic liquid crystal (LC EBBA doped by multi-walled carbon nanotubes (MWCNTs near the percolation threshold of the MWCNTs (0.02÷0.05 wt. %. It is caused by irreversible homeotropic-to-planar reorientation of LC in an electric field. This feature is explained by electro-hydrodynamically stimulated dispergation of MWCNTs in LC and by the formation of a percolation MWCNT network which acts as a spatially distributed surface stabilizing the planar state of the LC. This mechanism is confirmed by the absence of memory in the EBBA/MWCNT composites, whose original structure is fixed by a polymer. The observed effect suggests new operation modes for the memory type and bistable LC devices, as well as a method for in situ dispergation of carbon nanotubes in LC cells.

  13. Amplitude modulation in infrared metamaterial absorbers based on electro-optically tunable conducting oxides

    Science.gov (United States)

    Zografopoulos, D. C.; Sinatkas, G.; Lotfi, E.; Shahada, L. A.; Swillam, M. A.; Kriezis, E. E.; Beccherelli, R.

    2018-02-01

    A class of electro-optically tunable metamaterial absorbers is designed and theoretically investigated in the infrared regime towards realizing free-space amplitude modulators. The spacer between a subwavelength metallic stripe grating and a back metal reflector is occupied by a bilayer of indium tin oxide (ITO) and hafnium oxide (HfO_2). The application of a bias voltage across the bilayer induces free-carrier accumulation at the HfO_2/ITO interface that locally modulates the ITO permittivity and drastically modifies the optical response of the absorber owing to the induced epsilon-near-zero (ENZ) effect. The carrier distribution and dynamics are solved via the drift-diffusion model, which is coupled with optical wave propagation studies in a common finite-element method platform. Optimized structures are derived that enable the amplitude modulation of the reflected wave with moderate insertion losses, theoretically infinite extinction ratio, sub-picosecond switching times and low operating voltages.

  14. Crenelated fast oscillatory outputs of a two-delay electro-optic oscillator.

    Science.gov (United States)

    Weicker, Lionel; Erneux, Thomas; Jacquot, Maxime; Chembo, Yanne; Larger, Laurent

    2012-02-01

    An electro-optic oscillator subject to two distinct delayed feedbacks has been designed to develop pronounced broadband chaotic output. Its route to chaos starts with regular pulsating gigahertz oscillations that we investigate both experimentally and theoretically. Of particular physical interest are the transitions to various crenelated fast time-periodic oscillations, prior to the onset of chaotic regimes. The two-delay problem is described mathematically by two coupled delay-differential equations, which we analyze by using multiple-time-scale methods. We show that the interplay of a large delay and a relatively small delay is responsible for the onset of fast oscillations modulated by a slowly varying square-wave envelope. As the bifurcation parameter progressively increases, this envelope undergoes a sequence of bifurcations that corresponds to successive fixed points of a sine map.

  15. Lidar Electro-Optic Beam Switch with a Liquid Crystal Variable Retarder

    Science.gov (United States)

    Baer, James

    2012-01-01

    A document discusses a liquid crystal variable retarder, an electro-optic element that changes the polarization of an optical beam in response to a low-voltage electronic signal. This device can be fabricated so that the element creates, among other states, a half-wave of retardance that can be reduced to a very small retardance. When aligned to a polarized source, this can act to rotate the polarization by 90 in one state, but generate no rotation in the other state. If the beam is then incident on a polarization beam splitter, it will efficiently switch from one path to the other when the voltage is applied. The laser beam switching system has no moving parts, improving reliability over mechanical switching. It is low cost, tolerant of high laser power density, and needs only simple drive electronics, minimizing the required system resources.

  16. An Apparatus of increased precision for the Measurement of Electro-Optical parameters of Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Vishal Singh Chandel

    2012-11-01

    Full Text Available The ferroelectric liquid crystals (FLCs are demanding high attention now a day, because of their potential applications in many electro-optical devices, particularly in displays. The suitable applications of FLCs in devices are decided by their electro-optical properties like tilt angle, birefringence and spontaneous polarization. In this paper  we are presenting a new apparatus for highly accurate measurement of electro-optical parameters of FLCs. The accuracy of the apparatus is the best among the currently available equipments in the market. The accuracy and performance of the apparatus has been confirmed by performing the experiments on standard ferroelectric liquid crystals.

  17. Electro-Optic Laser Scanners for Space-Based Lidar, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The purpose of this phase II SBIR is to design and build new non-mechanical, electro-optic (EO) laser scanners that will be suitable for space based laser ranging,...

  18. High Power Electro-Optic Modulator for Space-Based Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ADVR, Inc. proposes the development of a fiber coupled, high power, electro-optically controlled, space qualified, phase modulator for the NASA Laser Interferometer...

  19. High Power Electro-Optic Modulator for Space-Based Applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I effort will establish the feasibility of developing a fiber coupled, high power, electro-optically controlled, space...

  20. Non-Mechanical, Electro-Optic Beamsteerers for Space Based Laser Communications, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase II SBIR we will design, build, test, and deliver extremely low Size, Weight, and Power (SWaP) non-mechanical, electro-optic (EO) laser beamsteerers...

  1. Airborne Thematic Thermal InfraRed and Electro-Optical Imaging System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation is an advanced Airborne Thematic Thermal InfraRed and Electro-Optical Imaging System (ATTIREOIS). ATTIREOIS sensor payload consists of two sets of...

  2. Electro-Optic Laser Scanners for Space-Based Lidar Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Vescent Photonics propose to design and build revolutionary non-mechanical, electro-optic (EO) laser scanners that will be suitable for space based laser ranging,...

  3. Organic electro-optic thin films by simultaneous vacuum deposition and laser-assisted poling.

    Science.gov (United States)

    Wang, Zhaohong; Sun, Weiwei; Chen, Antao; Kosilkin, Ilya; Bale, Denise; Dalton, Larry R

    2011-08-01

    Organic materials with a high second-order optical nonlinearity have an important application for the next generation of computing, telecommunications, and other industries. Because of a high electro-optic coefficient and low dielectric constant, N-benzyl-2-methyl-4-nitroaniline (BNA) single crystals have been grown and their optical properties have been extensively studied. In this Letter, a poled BNA thin film material was prepared through simultaneous vacuum evaporation and laser-assisted electrical poling. The linear electro-optic coefficients of BNA were measured by a Young's two-slit interference electro-optic measurement method. The dependence of the resulting electro-optic properties on optical power was explored. Enhancement induced by laser illumination was demonstrated. The BNA thin film can exhibit an r(33) value comparable to that of BNA single crystals. © 2011 Optical Society of America

  4. Configuration of electro-optic fire source detection system

    Science.gov (United States)

    Fabian, Ram Z.; Steiner, Zeev; Hofman, Nir

    2007-04-01

    The recent fighting activities in various parts of the world have highlighted the need for accurate fire source detection on one hand and fast "sensor to shooter cycle" capabilities on the other. Both needs can be met by the SPOTLITE system which dramatically enhances the capability to rapidly engage hostile fire source with a minimum of casualties to friendly force and to innocent bystanders. Modular system design enable to meet each customer specific requirements and enable excellent future growth and upgrade potential. The design and built of a fire source detection system is governed by sets of requirements issued by the operators. This can be translated into the following design criteria: I) Long range, fast and accurate fire source detection capability. II) Different threat detection and classification capability. III) Threat investigation capability. IV) Fire source data distribution capability (Location, direction, video image, voice). V) Men portability. ) In order to meet these design criteria, an optimized concept was presented and exercised for the SPOTLITE system. Three major modular components were defined: I) Electro Optical Unit -Including FLIR camera, CCD camera, Laser Range Finder and Marker II) Electronic Unit -including system computer and electronic. III) Controller Station Unit - Including the HMI of the system. This article discusses the system's components definition and optimization processes, and also show how SPOTLITE designers successfully managed to introduce excellent solutions for other system parameters.

  5. Development of electro-optical instrumentation for reactor safety studies

    International Nuclear Information System (INIS)

    Turko, B.T.; Kolbe, W.F.; Leskovar, B.; Sun, R.K.

    1980-11-01

    The development of new electro-optical instrumentation for reactor safety studies is described. The system measures the thickness of the water film and droplet size and velocity distributions which would be encountered in the annular two-phase flow in a reactor cooling system. The water film thickness is measured by a specially designed capacitance system with a short time constant. Water droplet size and velocity are measured by a subsystem consisting of a continuously pulsed laser light source, a vidicon camera, a video recorder, and an automatic image analyzer. An endoscope system attached to the video camera is used to image the droplets. Each frame is strobed with two accurately spaced uv light pulses, from two sequentially fired nitrogen lasers. The images are stored in the video disk recorder. The modified automatic image analyzer is programmed to digitize the droplet size and velocity distributions. Many special optical, mechanical and electronic system components were designed and fabricated. They are described in detail, together with calibration charts and experimental results

  6. Electro-Optical Design for Efficient Visual Communication

    Science.gov (United States)

    Huck, Friedrich O.; Fales, Carl L.; Jobson, Daniel J.; Rahman, Zia-Ur

    1995-01-01

    Visual communication, in the form of telephotography and television, for example, can be regarded as efficient only if the amount of information that it conveys about the scene to the observer approaches the maximum possible and the associated cost approaches the minimum possible. Elsewhere we have addressed the problem of assessing the end to end performance of visual communication systems in terms of their efficiency in this sense by integrating the critical limiting factors that constrain image gathering into classical communications theory. We use this approach to assess the electro-optical design of image gathering devices as a function of the f number and apodization of the objective lens and the aperture size and sampling geometry of the phot-detection mechanism. Results show that an image gathering device that is designed to optimize information capacity performs similarly to the human eye. For both, the performance approaches the maximum possible, in terms of the efficiency with which the acquired information can be transmitted as decorrelated data, and the fidelity, sharpness, and clearity with which fine detail can be restored.

  7. Atmospheric lidar co-alignment sensor: flight model electro-optical characterization campaign

    Science.gov (United States)

    Valverde Guijarro, Ángel Luis; Belenguer Dávila, Tomás.; Laguna Hernandez, Hugo; Ramos Zapata, Gonzalo

    2017-10-01

    Due to the difficulty in studying the upper layer of the troposphere by using ground-based instrumentation, the conception of a space-orbit atmospheric LIDAR (ATLID) becomes necessary. ATLID born in the ESA's EarthCare Programme framework as one of its payloads, being the first instrument of this kind that will be in the Space. ATLID will provide vertical profiles of aerosols and thin clouds, separating the relative contribution of aerosol and molecular scattering to know aerosol optical depth. It operates at a wavelength of 355 nm and has a high spectral resolution receiver and depolarization channel with a vertical resolution up to 100m from ground to an altitude of 20 km and, and up to 500m from 20km to 40km. ATLID measurements will be done from a sun-synchronous orbit at 393 km altitude, and an alignment (co-alignment) sensor (CAS) is revealed as crucial due to the way in which LIDAR analyses the troposphere. As in previous models, INTA has been in charge of part of the ATLID instrument co-alignment sensor (ATLID-CAS) electro-optical characterization campaign. CAS includes a set of optical elements to take part of the useful signal, to direct it onto the memory CCD matrix (MCCD) used for the co-alignment determination, and to focus the selected signal on the MCCD. Several tests have been carried out for a proper electro-optical characterization: CAS line of sight (LoS) determination and stability, point spread function (PSF), absolute response (AbsRes), pixel response non uniformity (PRNU), response linearity (ResLin) and spectral response. In the following lines, a resume of the flight model electrooptical characterization campaign is reported on. In fact, results concerning the protoflight model (CAS PFM) will be summarized. PFM requires flight-level characterization, so most of the previously mentioned tests must be carried out under simulated working conditions, i.e., the vacuum level (around 10-5 mbar) and temperature range (between 50°C and -30°C) that

  8. Electro-optic studies of the flexoelectric effect in chiral nematic liquid crystals

    Energy Technology Data Exchange (ETDEWEB)

    Musgrave, B

    2000-01-01

    With the advent of global telecommunications networks and the Internet, the development of portable display technology has gained a new impetus. Liquid crystal devices have played a major role in this area, most conspicuously as displays in laptop computers. To date, these liquid crystalline devices have been generally based on the rather slow ({approx} 30 ms) dielectric response of the achiral nematic liquid crystal phase, although more expensive devices based on the faster (< 100 {mu}s) ferroelectric switching of the smectic C* phase are in production. The research presented in this thesis relates to a new switching effect recently discovered in the chiral nematic phase. The flexoelectrically-driven rotation of the chiral nematic phase's optic axis is fast - of the order 10 {mu}s to lms - proportional to the applied field amplitude and completely in-plane. The optic axis has been deflected by over 30 deg. from the equilibrium position in some materials. These electro-optic properties make the 'flexoelectro-optic' effect a potential contender in the liquid crystal device market. The present thesis contains the first studies of the effect of molecular structure on flexoelectric coupling in the chiral nematic phase. Several homologous series of estradiol-cyanobiphenyl bimesogenic materials synthesized for this work have been characterized and their electro-optic properties investigated. The chiral nematic phases of these materials have unusually strong flexoelectro-optic effects and respond on a sub-millisecond timescale. The ratios of the effective flexoelectric coefficient to the mean splay-bend elastic constant, e-bar/K, in the present materials lie in the range 0.3 to 0.6 C N{sup -1} m{sup -1}, and are the highest measured to date: the highest value previously published is 0.12 C N{sup -1} m{sup -1}, measured for the commercial mixture TM216. In order to interpret the effect of the bimesogens' molecular structure, achiral nematic monomesogens

  9. Characterization of the phase modulation property of a free-space electro-optic modulator by interframe intensity correlation matrix.

    Science.gov (United States)

    Yue, Huimin; Song, Lei; Hu, Zexiong; Liu, Hongxiang; Liu, Yong; Liu, Yongzhi; Peng, Zengshou

    2012-07-01

    Characterization of a phase modulator or phase shifter has always been an integral part of phase-modulating or phase-adjusting applications. We propose a simplified approach to characterize a phase modulator by investigating the performance of phase shifts from grabbed interferograms using the phase extraction method. After reviewing some phase analysis techniques, the interframe intensity correlation (IIC) matrix method is introduced to the investigation. The proposed strategy is illustrated by the measurement of a free-space electro-optic modulator (EOM). Placing the modulator in one arm of a Michelson interferometer, the global phase shifts are estimated by the IIC method from the phase-stepped interferograms. Experimental results demonstrate the tested EOM has a phase modulation response of at least 2π  rad with a π/20  rad modulation precision for λ=1064  nm. In addition, our method is applicable to various types of phase modulator or phase shifter calibration, e.g., electro-optic phase modulator, spatial light modulator, or piezoelectric transducer (PZT).

  10. Electro-Optical Payloads and CubeSat Missions for Earth and Space Science

    Science.gov (United States)

    Swenson, C.; Marchant, A.

    2015-12-01

    Small, low-power electro-optical scientific payloads are required if small satellites and CubeSats are to become significant enablers of new science. Although these are just one class of scientific instrumentation they have often played a key role in many scientific discoveries. The most significant advances in Earth and space science, over the next decade are most likely to derive from new observational techniques. The connection between advances in scientific understanding and technology has historically been demonstrated across many disciplines and time. In this paper we present a review of three such sensors and the associated CubeSat missions and scientific investigation enabled. Each mission involves a relatively recently developed small electro-optical sensor which is tightly integrated with the small satellite bus in to a "Science Craft". The first is the NSF funded OPAL mission which makes use of a high-sensitivity, hyper-spectral limb imager to observe the daytime O2 A-band (near 762nm) emission. These observations allow the temperature of the lower thermosphere to be determined and address questions on the energy budget and response of the thermosphere to geomagnetic storms. The second is the MeNISCuS mission Methane Nadir Imaging Spatial-heterodyne CubeSat Spectrometer which is a demonstration of the volume holographic grating (VHG) spatial heterodyne spectrometer developed under a NASA-sponsored STTR contract. Methane (CH4) is the second most important greenhouse gas and although burning methane produces less CO2 than oil or coal, methane's global warming potential is about ~30 times higher. As a result, if methane leak rates are greater than 3-5%, the warming potential will outweigh the benefit of reduced CO2. The sources of such leaks can be discovered using missions like MeNISCuS. The third instrument and mission is SEDI a CubeSat scaled Fabry-Perot spectrometer focused on a narrow band around the OI(630) red line for observing winds in the

  11. Short bent-core molecules: X-ray, polarization, dielectricity, texture and electro-optics investigations.

    Science.gov (United States)

    Torgova, S; Sreenilayam, S P; Panarin, Yu P; Francescangeli, O; Vita, F; Vij, J K; Pozhidaev, E; Minchenko, M; Ferrero, C; Strigazzi, A

    2017-08-30

    Bent-core liquid crystals based on 1,2,4-oxadiazole as a central unit have been the first mesogens to exhibit a ferroelectric response in the nematic phase. This behavior has been widely recognized as due to the presence of smectic-like polar cybotactic clusters permeating the nematic phase. Unfortunately, these compounds exhibited rather high melting points, about 120 °C, due to the presence of four benzene rings in the molecules. Here we describe the synthesis and physical characterization of a new series of BC mesogens, featuring the same bent core as the previous compounds but shorter outer substituents. By keeping only two benzene rings, we were able to lower the melting points to about 70 °C. However, while X-ray diffraction and dielectric spectroscopy measurements confirm the cybotactic nature of the nematic phase of these compounds, polarization and electro-optical measurements ascribe their polar response to flexoelectricity rather than to spontaneous polarization. Finally, texture investigation suggests the biaxiality of the nematic phase, which is indicated also by conoscopic measurements. These results are important for recognizing size and rigidity limitations in designing bent-core liquid crystal molecules suitable for applications.

  12. A magneto-electro-optical effect in a plasmonic nanowire material.

    Science.gov (United States)

    Valente, João; Ou, Jun-Yu; Plum, Eric; Youngs, Ian J; Zheludev, Nikolay I

    2015-04-24

    Electro- and magneto-optical phenomena play key roles in photonic technology enabling light modulators, optical data storage, sensors and numerous spectroscopic techniques. Optical effects, linear and quadratic in external electric and magnetic field are widely known and comprehensively studied. However, optical phenomena that depend on the simultaneous application of external electric and magnetic fields in conventional media are barely detectable and technologically insignificant. Here we report that a large reciprocal magneto-electro-optical effect can be observed in metamaterials. In an artificial chevron nanowire structure fabricated on an elastic nano-membrane, the Lorentz force drives reversible transmission changes on application of a fraction of a volt when the structure is placed in a fraction-of-tesla magnetic field. We show that magneto-electro-optical modulation can be driven to hundreds of thousands of cycles per second promising applications in magneto-electro-optical modulators and field sensors at nano-tesla levels.

  13. Hybrid electro-optics and chipscale integration of electronics and photonics

    Science.gov (United States)

    Dalton, L. R.; Robinson, B. H.; Elder, D. L.; Tillack, A. F.; Johnson, L. E.

    2017-08-01

    Taken together, theory-guided nano-engineering of organic electro-optic materials and hybrid device architectures have permitted dramatic improvement of the performance of electro-optic devices. For example, the voltage-length product has been improved by nearly a factor of 104 , bandwidths have been extended to nearly 200 GHz, device footprints reduced to less than 200 μm2 , and femtojoule energy efficiency achieved. This presentation discusses the utilization of new coarse-grained theoretical methods and advanced quantum mechanical methods to quantitatively simulate the physical properties of new classes of organic electro-optic materials and to evaluate their performance in nanoscopic device architectures, accounting for the effect on chromophore ordering at interfaces in nanoscopic waveguides.

  14. Measurement of Sub-Picosecond Electron Bunches via Electro-Optic Sampling of Coherent Transition Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Timothy John [Northern Illinois U.

    2012-01-01

    Future collider applications as well as present high-gradient laser plasma wakefield accelerators and free-electron lasers operating with picosecond bunch durations place a higher demand on the time resolution of bunch distribution diagnostics. This demand has led to significant advancements in the field of electro-optic sampling over the past ten years. These methods allow the probing of diagnostic light such as coherent transition radiation or the bunch wakefields with sub-picosecond time resolution. We present results on the single-shot electro-optic spectral decoding of coherent transition radiation from bunches generated at the Fermilab A0 photoinjector laboratory. A longitudinal double-pulse modulation of the electron beam is also realized by transverse beam masking followed by a transverse-to-longitudinal phase-space exchange beamline. Live profile tuning is demonstrated by upstream beam focusing in conjunction with downstream monitoring of single-shot electro-optic spectral decoding of the coherent transition radiation.

  15. Theory-Guided Design of Organic Electro-Optic Materials and Devices

    Directory of Open Access Journals (Sweden)

    Stephanie Benight

    2011-08-01

    Full Text Available Integrated (multi-scale quantum and statistical mechanical theoretical methods have guided the nano-engineering of controlled intermolecular electrostatic interactions for the dramatic improvement of acentric order and thus electro-optic activity of melt-processable organic polymer and dendrimer electro-optic materials. New measurement techniques have permitted quantitative determination of the molecular order parameters, lattice dimensionality, and nanoscale viscoelasticity properties of these new soft matter materials and have facilitated comparison of theoretically-predicted structures and thermodynamic properties with experimentally-defined structures and properties. New processing protocols have permitted further enhancement of material properties and have facilitated the fabrication of complex device structures. The integration of organic electro-optic materials into silicon photonic, plasmonic, and metamaterial device architectures has led to impressive new performance metrics for a variety of technological applications.

  16. ELECTRON BUNCH CHARACTERIZATION WITH SUBPICOSECOND RESOLUTION USING ELECTRO-OPTIC TECHNIQUE

    International Nuclear Information System (INIS)

    SEMERTZIDIS, Y.K.; CASTILLO, V.; LARSEN, R.; LAZARUS, D.M.; NIKAS, D.; OZBEN, C.; SRINIVASAN-RAO, T.; STILLMAN, A.; TSANG, T.; KOWALSKI, L.

    2001-01-01

    In the past decade, the bunch lengths of electrons in accelerators have decreased dramatically and are in the range off a few millimeters. Measurement of the length as well as the longitudinal profile of these short bunches have been a topic of research in a number of institutions. One of the techniques uses the electric field induced by the passage of electrons in the vicinity of a birefringent crystal to change its optical characteristics. Well-established electro-optic techniques can then be used to measure the temporal characteristics of the electron bunch. The inherent fast response of the crystal facilitates the measurement to femtosecond time resolution. However, the resolution in experiments so far has been limited to 70 ps, by the bandwidth of the detection equipment. Use of a streak camera can improve this resolution to a few picoseconds. In this paper we present a novel, non-invasive, single-shot approach to improve the resolution to tens of femtoseconds so that sub mm bunch length can be measured

  17. CuInS2/ZnS QD-ferroelectric liquid crystal mixtures for faster electro-optical devices and their energy storage aspects

    Science.gov (United States)

    Singh, Dharmendra Pratap; Vimal, Tripti; Mange, Yatin J.; Varia, Mahesh C.; Nann, Thomas; Pandey, K. K.; Manohar, Rajiv; Douali, Redouane

    2018-01-01

    CuInS2/ZnS core/shell quantum dots (CIS/ZnS QDs) dispersed ferroelectric liquid crystal (FLC) mixtures have been characterized for their application in electro-optical devices, energy storage, and solar cells. Physical properties of the CIS/ZnS QD-FLC (ferroelectric liquid crystal) mixtures have also been investigated with varying QD concentrations in order to optimize the critical concentration of QDs in mixtures. The presence of QDs breaks the geometrical symmetry in the FLC matrix, which results in a change in the physical properties of the mixtures. We observed the reduced values of primary and secondary order parameters (tilt angle and spontaneous polarization, respectively) for mixtures, which also depend on the concentration of QDs. The reduction of spontaneous polarization in QDs-FLC mixtures is attributed to the adverse role of flexoelectric contribution in the mixtures. The 92% faster electro-optic response and enhanced capacitance indicate the possible application of these mixtures in electro-optical devices and solar cells. Photoluminescence emission of pure FLC and QDs-FLC mixtures has been thermally tailored, which is explained by suitable models.

  18. SCALE FACTOR DETERMINATION METHOD OF ELECTRO-OPTICAL MODULATOR IN FIBER-OPTIC GYROSCOPE

    Directory of Open Access Journals (Sweden)

    A. S. Aleynik

    2016-05-01

    Full Text Available Subject of Research. We propose a method for dynamic measurement of half-wave voltage of electro-optic modulator as part of a fiber optic gyroscope. Excluding the impact of the angular acceleration o​n measurement of the electro-optical coefficient is achieved through the use of homodyne demodulation method that allows a division of the Sagnac phase shift signal and an auxiliary signal for measuring the electro-optical coefficient in the frequency domain. Method. The method essence reduces to decomposition of step of digital serrodyne modulation in two parts with equal duration. The first part is used for quadrature modulation signals. The second part comprises samples of the auxiliary signal used to determine the value of the scale factor of the modulator. Modeling is done in standalone model, and as part of a general model of the gyroscope. The applicability of the proposed method is investigated as well as its qualitative and quantitative characteristics: absolute and relative accuracy of the electro-optic coefficient, the stability of the method to the effects of angular velocities and accelerations, method resistance to noise in actual devices. Main Results. The simulation has showed the ability to measure angular velocity changing under the influence of angular acceleration, acting on the device, and simultaneous measurement of electro-optical coefficient of the phase modulator without interference between these processes. Practical Relevance. Featured in the paper the ability to eliminate the influence of the angular acceleration on the measurement accuracy of the electro-optical coefficient of the phase modulator will allow implementing accurate measurement algorithms for fiber optic gyroscopes resistant to a significant acceleration in real devices.

  19. Systems engineering and analysis of electro-optical and infrared systems

    CERN Document Server

    Arrasmith, William Wolfgang

    2015-01-01

    Introduction to Electro-optic and Infrared (EO/IR) Systems Engineering?Radiation in the Visible and Infrared Parts of the Electromagnetic SpectrumRadiation SourcesThe Effect of the Atmosphere on Optical PropagationBasic OpticsOptical ModulationThe Detection of Optical RadiationNoise in the Optical Detection ProcessTechnical Performance Measures and Metrics of Optical DetectorsModern Detectors and their Measures of PerformanceThe Effects of Cooling on Optical Detector NoiseSignal and Image ProcessingElectro-Optic and Infrared Systems AnalysisLaser Imaging Systems?Spectral Imaging?LIDAR and LADA

  20. Electro optic sensor for high precision absolute distance measurement using multiwavelength interferometry.

    Science.gov (United States)

    Sharma, Sucheta; Eiswirt, Peter; Petter, Jürgen

    2018-02-05

    A prototype multi-wavelength interferometric, phase shifting distance sensor based on linear electro optic effect has been demonstrated in this work to improve the measurement speed of a commercial four-wavelength interferometer. Experimental results revealed the phase modulation ability of the sensor, preserving equivalent efficiency for nanometer-scale absolute distance measurement similar to present piezoelectricity driven mechanical phase modulation. The electro optic sensor working under free beam propagation can significantly overcome the limitations experienced by mechanical phase modulation technique such as the restricted value for the modulating frequency and as well the high driving voltage requirement.

  1. Large-area Fabry-Perot modulator based on electro-optic polymers

    DEFF Research Database (Denmark)

    Benter, Nils; Bertram, Ralph Peter; Soergel, Elisabeth

    2006-01-01

    We present a large-area electro-optic Fabry-Perot modulator utilizing a photoaddressable bis-azo polymer placed between two dielectric mirrors with an open aperture of 2 cm. A modulation efficientcy of 1% at an effective modulation voltage of 20 V for a wavelength of 1.55 mymeter is demonstrated...

  2. Electro-optical effect of a magnetically biased ferronematic liquid crystal.

    Science.gov (United States)

    Chen, S H; Liang, B J

    1988-09-01

    The electro-optical effect of a magnetically biased ferronematic liquid-crystal film is investigated by using birefringence measurements. When a magnetic field is applied, the threshold voltage of the Freedericksz transition no longer exists. The dependence of the birefringence on the magnetic field strength in the low field regime is presented. A theory that accounts for the results is given.

  3. Single-Nanoparticle Plasmonic Electro-optic Modulator Based on MoS2Monolayers.

    Science.gov (United States)

    Li, Bowen; Zu, Shuai; Zhou, Jiadong; Jiang, Qiao; Du, Bowen; Shan, Hangyong; Luo, Yang; Liu, Zheng; Zhu, Xing; Fang, Zheyu

    2017-10-24

    The manipulation of light in an integrated circuit is crucial for the development of high-speed electro-optic devices. Recently, molybdenum disulfide (MoS 2 ) monolayers generated broad interest for the optoelectronics because of their huge exciton binding energy, tunable optical emission, direct electronic band-gap structure, etc. Miniaturization and multifunctionality of electro-optic devices further require the manipulation of light-matter interaction at the single-nanoparticle level. The strong exciton-plasmon interaction that is generated between the MoS 2 monolayers and metallic nanostructures may be a possible solution for compact electro-optic devices at the nanoscale. Here, we demonstrate a nanoplasmonic modulator in the visible spectral region by combining the MoS 2 monolayers with a single Au nanodisk. The narrow MoS 2 excitons coupled with broad Au plasmons result in a deep Fano resonance, which can be switched on and off by applying different gate voltages on the MoS 2 monolayers. A reversible display device that is based on this single-nanoparticle modulator is demonstrated with a heptamer pattern that is actively controlled by the external gates. Our work provides a potential application for electro-optic modulation on the nanoscale and promotes the development of gate-tunable nanoplasmonic devices in the future.

  4. Optimization of electro-optic phase shifters for integrated optical phased arrays

    Science.gov (United States)

    Macik, Dwayne D.; Bravo, Tyler E.; Pentecost, Seeley M.; Espinal, Francisco A.; Madsen, Christi K.

    2017-05-01

    A low-loss, high-speed optical phased array (OPA) has been designed and fabricated. Two different platforms have been utilized in combination to leverage electro-optic (EO) tuning. A lithium niobate (LiNbO3) optical phased array was fabricated and used in conjunction with a silicon nitride (Si3N4) 8x8 waveguide array that condenses the output pitch and utilizes the TriplexTM waveguide technology. This OPA allows for the non-mechanical beam steering (NMBS) of 1550 nm light on an edge coupled optic platform and takes advantage of the high electro-optic coefficient and high speed capability of LiNbO3 for electro-optic phase tuning. This coupled OPA has an overall insertion loss of 3.5 dB which is advantageous to silicon-on-insulator OPAs that have shown overall insertion losses of 14 dB. To characterize and tune this device, a 3 lens imaging system was employed to produce both near- and far- field intensity patterns of the output of the OPA on a static image plane. At the image plane, a high resolution infrared camera was used to observe the resulting intensity pattern. The control software for tuning the OPA reads the intensity incident at a specified position on the detector array, and has a PWM interface to drive the electro-optic phase controls. Beam steering was accomplished using an iterative tuning algorithm.

  5. Quantum calculations of the electro-optical parameters of haloid ethers, esters, amides and carbamates

    Science.gov (United States)

    Furer, V. L.

    1992-03-01

    Force and electro-optical parameters of haloid ethers, esters, amides and carbamates were calculated using the MINDO/3 method. The obtained values of parameters, frequencies and intensities of bands in IR spectra are in good accordance with experiment. The changes of molecular parameters due to the electronic interactions and conformational transitions are discussed.

  6. Proceedings of the IEEE laser and electro-optics society annual meeting

    International Nuclear Information System (INIS)

    Hudson, M.J.B.; Raney, H.; Raney, D.; Spalaris, C.N.

    1990-01-01

    This book is covered under the following headings: Electro-optic systems; Emerging laser technology; Optical sensors and measurements; Optoelectronics; Semiconductor diode lasers; Solid state lasers; UV and short wavelength; Applied optical diagnostics of semiconductor materials and devices symposium and optical sensors and measurements; and Applied optical diagnostics of semiconductor materials and devices symposium

  7. Conoscopic polarized interference applied in measuring uniaxial axis direction of electro-optic crystal

    Science.gov (United States)

    Liu, Yong; Jiang, Hongzhen; Zhang, Lin; Li, Dong; Liu, Xu; Zheng, Fanglan

    2016-10-01

    The crystal can be used to be electro-optic switch because of its electro-optic modulation. Generally the uniaxial axis of electro-optic crystal is perpendicular to the light injection surface. Due to the manufacturing precision, the uniaxial axis direction has a little angle with the normal of the light injection surface, which affects the electro-optic modulation ability. In conoscopic polarized inference, due to birefraction the ordinary ray and extraordinary ray from crystal interferes after the polarizer. The interference pattern of crystal component is circle fringes with dark cross. The center of interference pattern has relation to the uniaxial axis direction. Using digital camera to capture the pattern and the center position of interferogram can be determinate by image processing program. In repeatability experiments the rms of center position is around 1 pixel. To measure the uniaxial axis direction, the normal direction of the crystal component should also be accurately determinate. Michelson interference method is introduced to determinate the normal direction. If rotate the crystal component around the normal direction in conoscopic polarized interference, the track of interferogram center is a circle theoretically. The circle center is related to the normal direction of crystal component, and the radii is related to the angle uniaxial axis, which can be determinate by least square fitting method. Experiment result shows that the measuring precision can achieves several tens of microradians.

  8. Determination of electro-optic coefficients of lithium niobate crystal by polarization and interference methods

    Science.gov (United States)

    Syuy, A. V.; Kile, E. O.

    2016-11-01

    In this paper electrooptical coefficients r22, [r13 - 0.9r33 ], of nominally pure single congruent crystal of lithium niobate are determined. Measurement of electro-optic coefficients is produced by two independent methods: polarization and interference. The polarization scheme is based on the Senarmont method and interference scheme - on conoscopic figures.

  9. Weather and Atmospheric Effects on the Measurement and Use of Electro-Optical Signature Data

    Science.gov (United States)

    2017-02-01

    Radiation from these atmospheric constituents also contaminates the radiation from targets. Some weather conditions, such as clouds and fogs...Optical Systems Group RCC 469-17 WEATHER AND ATMOSPHERIC EFFECTS ON THE MEASUREMENT AND USE OF ELECTRO-OPTICAL SIGNATURE DATA...NATIONAL AERONAUTICS AND SPACE ADMINISTRATION This page intentionally left blank. DOCUMENT 469-17 WEATHER AND ATMOSPHERIC

  10. Linear electro-optical properties of tetragonal BaTiO 3

    Indian Academy of Sciences (India)

    Linear optical susceptibility and clamped linear electro-optical tensor coefficients of tetragonal BaTiO3 are calculated using a formalism based on bond charge theory. Calculated values are in close agreement with experimental data. The covalent Ti–O bonds constituting distorted TiO6 octahedral groups are found to be ...

  11. Second harmonic generation and electro-optical Pockels effect of 1 ...

    Indian Academy of Sciences (India)

    701–710. c Indian Academy of Sciences. Second harmonic generation and electro-optical Pockels effect of 1- and 3-nitro-6-azabenzo[a]pyrene N-oxide isomers: A Hartree–Fock and Coulomb-attenuating density functional theory investigation. ANDREA ALPARONE. Department of Chemistry, University of Catania, viale A.

  12. Electro-optic single-crystalline organic waveguides and nanowires grown from the melt.

    Science.gov (United States)

    Figi, Harry; Jazbinsek, Mojca; Hunziker, Christoph; Koechlin, Manuel; Günter, Peter

    2008-07-21

    Organic nonlinear optical materials have proven to possess high and extremely fast nonlinearities compared to conventional inorganic crystals, allowing for sub-1-V driving voltages and modulation bandwidths of over 100 GHz. Compared to more widely studied poled electro-optic polymers, organic electro-optic crystals exhibit orders of magnitude better thermal and photochemical stability. The lack of available structuring techniques for organic crystals has been the major drawback for exploring their potential for photonic structures. Here we present a new approach to fabricate high-quality electro-optic single crystal waveguides and nanowires of configurationally locked polyene DAT2 (2-(3-(2-(4-dimethylaminophenyl)vinyl)-5,5-dimethylcyclohex-2-enylidene)malononitrile). The high-index-contrast waveguides (delta(n) = 0.54 +/- 0.04) are grown from the melt between two anodically bonded borosilicate glass wafers, which are structured and equipped with electrodes prior to bonding. Electro-optic phase modulation is demonstrated for the first time in the non-centrosymmetric DAT2 single crystalline channel waveguides at a wavelength of 1.55 microm. We also show that this technique in combination with DAT2 material allows for the fabrication of single-crystalline nanostructures inside large-area devices with crystal thicknesses below 30 nm and lengths of above 7 mm.

  13. Giant quadratic electro-optical effect during polarization switching in ultrathin ferroelectric polymer films

    Energy Technology Data Exchange (ETDEWEB)

    Blinov, L. M., E-mail: lev39blinov@gmail.com; Lazarev, V. V.; Palto, S. P.; Yudin, S. G. [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation)

    2012-04-15

    The low-frequency quadratic electro-optical effect with a maximum electro-optical coefficient of g = 8 Multiplication-Sign 10{sup -19} m{sup 2}/V{sup 2} (i.e., four orders of magnitude greater than the standard high-frequency value) has been studied in thin films of ferroelectric polymer PVDF(70%)-TrFE(30%). The observed effect is related to the process of spontaneous polarization switching, during which the electron oscillators of C-F and C-H dipole groups rotate to become parallel to the applied field. As a result, the ellipsoid of the refractive index exhibits narrowing in the direction perpendicular to the field. The field dependence of the electro-optical coefficient g correlates with that of the apparent dielectric permittivity, which can be introduced under the condition of ferroelectric polarization switching. The observed electro-optical effect strongly decreases when the frequency increases up to several hundred hertz. The temperature dependence of the effect exhibits clearly pronounced hysteresis in the region of the ferroelectric phase transition.

  14. Linear electro-optic effect based on flexoelectricity in a cholesteric with sign change of dielectric anisotropy

    Science.gov (United States)

    Rudquist, P.; Buivydas, M.; Komitov, L.; Lagerwall, S. T.

    1994-12-01

    The linear electro-optic effect in short-pitch chloresterics is based on the linear coupling of the medium with an applied electric field. It has a number of remarkable properties. The electric field causes the optic axis to tilt in a plane parallel to the surfaces of the cell glass plates, giving the same symmetry as the electro-optic effects in the smectic C* phase (surface stabilized ferroelectric liquid crystals and deformed helix mode) and the smectic A* phase (soft mode/electroclinic effect). For shutters and displays this guarantees a very wide viewing angle. The induced tilt is a linear function of the applied field, at least for small fields, which gives a well-controlled continuous grey scale. Furthermore, it is practically independent of temperature. Response times of the order of 100 micrometers are easily achievable. The most interesting development in this effect would be to extend the linear regime to much larger tilt angles, in particular to 22.5 deg, where light could be modulated from 100% to zero transmission. In order to do this the perturbation from the quadratic dielectric coupling has to be ruled out or minimized, which requires materials with essentially zero dielectric anisotorpy. This has been done, and it has been found that the bare flexoelectric-induced tilt has a surprising range of linearity: The linear response in tilt could be followed up to about 30 deg after which the high electric field caused breakdown. The response time is typically about 100 micrometers and below.

  15. Extreme nonlinear terahertz electro-optics in diamond for ultrafast pulse switching

    Directory of Open Access Journals (Sweden)

    Mostafa Shalaby

    2017-03-01

    Full Text Available Polarization switching of picosecond laser pulses is a fundamental concept in signal processing [C. Chen and G. Liu, Annu. Rev. Mater. Sci. 16, 203 (1986; V. R. Almeida et al., Nature 431, 1081 (2004; and A. A. P. Pohl et al., Photonics Sens. 3, 1 (2013]. Conventional switching devices rely on the electro-optical Pockels effect and work at radio frequencies. The ensuing gating time of several nanoseconds is a bottleneck for faster switches which is set by the performance of state-of-the-art high-voltage electronics. Here we show that by substituting the electric field of several kV/cm provided by modern electronics by the MV/cm field of a single-cycle THz laser pulse, the electro-optical gating process can be driven orders of magnitude faster, at THz frequencies. In this context, we introduce diamond as an exceptional electro-optical material and demonstrate a pulse gating time as fast as 100 fs using sub-cycle THz-induced Kerr nonlinearity. We show that THz-induced switching in the insulator diamond is fully governed by the THz pulse shape. The presented THz-based electro-optical approach overcomes the bandwidth and switching speed limits of conventional MHz/GHz electronics and establishes the ultrafast electro-optical gating technology for the first time in the THz frequency range. We finally show that the presented THz polarization gating technique is applicable for advanced beam diagnostics. As a first example, we demonstrate tomographic reconstruction of a THz pulse in three dimensions.

  16. Extreme nonlinear terahertz electro-optics in diamond for ultrafast pulse switching

    Science.gov (United States)

    Shalaby, Mostafa; Vicario, Carlo; Hauri, Christoph P.

    2017-03-01

    Polarization switching of picosecond laser pulses is a fundamental concept in signal processing [C. Chen and G. Liu, Annu. Rev. Mater. Sci. 16, 203 (1986); V. R. Almeida et al., Nature 431, 1081 (2004); and A. A. P. Pohl et al., Photonics Sens. 3, 1 (2013)]. Conventional switching devices rely on the electro-optical Pockels effect and work at radio frequencies. The ensuing gating time of several nanoseconds is a bottleneck for faster switches which is set by the performance of state-of-the-art high-voltage electronics. Here we show that by substituting the electric field of several kV/cm provided by modern electronics by the MV/cm field of a single-cycle THz laser pulse, the electro-optical gating process can be driven orders of magnitude faster, at THz frequencies. In this context, we introduce diamond as an exceptional electro-optical material and demonstrate a pulse gating time as fast as 100 fs using sub-cycle THz-induced Kerr nonlinearity. We show that THz-induced switching in the insulator diamond is fully governed by the THz pulse shape. The presented THz-based electro-optical approach overcomes the bandwidth and switching speed limits of conventional MHz/GHz electronics and establishes the ultrafast electro-optical gating technology for the first time in the THz frequency range. We finally show that the presented THz polarization gating technique is applicable for advanced beam diagnostics. As a first example, we demonstrate tomographic reconstruction of a THz pulse in three dimensions.

  17. Electro-optical system for the high speed reconstruction of computed tomography images

    International Nuclear Information System (INIS)

    Tresp, V.

    1989-01-01

    An electro-optical system for the high-speed reconstruction of computed tomography (CT) images has been built and studied. The system is capable of reconstructing high-contrast and high-resolution images at video rate (30 images per second), which is more than two orders of magnitude faster than the reconstruction rate achieved by special purpose digital computers used in commercial CT systems. The filtered back-projection algorithm which was implemented in the reconstruction system requires the filtering of all projections with a prescribed filter function. A space-integrating acousto-optical convolver, a surface acoustic wave filter and a digital finite-impulse response filter were used for this purpose and their performances were compared. The second part of the reconstruction, the back projection of the filtered projections, is computationally very expensive. An optical back projector has been built which maps the filtered projections onto the two-dimensional image space using an anamorphic lens system and a prism image rotator. The reconstructed image is viewed by a video camera, routed through a real-time image-enhancement system, and displayed on a TV monitor. The system reconstructs parallel-beam projection data, and in a modified version, is also capable of reconstructing fan-beam projection data. This extension is important since the latter are the kind of projection data actually acquired in high-speed X-ray CT scanners. The reconstruction system was tested by reconstructing precomputed projection data of phantom images. These were stored in a special purpose projection memory and transmitted to the reconstruction system as an electronic signal. In this way, a projection measurement system that acquires projections sequentially was simulated

  18. Applied electro-optics educational and training program with multiple entrance and exit pathways

    Science.gov (United States)

    Scott, Patricia; Zhou, Feng; Zilic, Dorothy

    2007-06-01

    This paper presents an innovative hands-on training program designed to create a pipeline of highly-skilled technical workers for today's workforce economy. The 2+2+2 Pennsylvania Integrated Workforce Leadership Program in Electro-Optics prepares students for a career in this new high-tech field. With seamless transition from high school into college, the program offers the versatility of multiple entrance and exit pathways. After completion of each educational level, students can exit the program with various skill levels, including certificates, an associate's degree, or a bachelor's degree. Launched by Indiana University of Pennsylvania (IUP) in partnership with Lenape Vocational School (Lenape), the 2+2+2 educational pathway program was implemented to promote early training of high-school students. During the first level, students in their junior and/or senior year enroll in four Electro-Optics courses at Lenape. Upon completion of these courses and an Advanced Placement Equivalency course with an appropriate exam score, students can earn a certificate from Lenape for the 15+ credits, which also can be articulated into IUP's associate degree program in Electro-Optics. During the second level, students can earn an associate's degree in Electro-Optics, offered only at the IUP Northpointe Campus. After completion of the Associate in Applied Science (A.A.S.), students are prepared to enter the workforce as senior technicians. During the third level, students who have completed the Associate of Science (A.S.) in Electro-Optics have the opportunity to matriculate at IUP's Indiana Campus to earn a Bachelor of Science (B.S.) degree in Applied Physics with a track in Electro-Optics. Hence, the name 2+2+2 refers to getting started in high school, continuing the educational experience with an associate's degree program, and optionally moving on to a bachelor's degree. Consequently, students move from one educational level to the next with advanced credits toward the next

  19. Mueller-matrix modeling and characterization of a dual-crystal electro-optic modulator.

    Science.gov (United States)

    Cervantes-L, Joel; Serrano-Garcia, David I; Otani, Yukitoshi; Cense, Barry

    2016-10-17

    A general mathematical model based on Mueller-matrix calculation is presented to describe the optical behavior of a dual-crystal electro-optic modulator. The two crystals inside the modulator are oriented at ± 45° with respect to the horizontal, thereby cancelling natural birefringence and temperature-induced birefringence. We describe the behavior of the modulator as a function of the ellipticity of the crystals, the rotation angles of the crystals and the applied voltage. By fitting the measured data with a Mueller-matrix model that uses values for the ellipticity and orientation angles of the crystals, the simulated data and the experimental measurements could be matched. This Mueller-matrix includes physical properties of the thermally compensated electro optic modulator, and the matrix can be used in simulations where these device-specific properties are important, for instance in the modeling of a polarization-sensitive optical coherence tomography system.

  20. Numerical simulation and optimal design of Segmented Planar Imaging Detector for Electro-Optical Reconnaissance

    Science.gov (United States)

    Chu, Qiuhui; Shen, Yijie; Yuan, Meng; Gong, Mali

    2017-12-01

    Segmented Planar Imaging Detector for Electro-Optical Reconnaissance (SPIDER) is a cutting-edge electro-optical imaging technology to realize miniaturization and complanation of imaging systems. In this paper, the principle of SPIDER has been numerically demonstrated based on the partially coherent light theory, and a novel concept of adjustable baseline pairing SPIDER system has further been proposed. Based on the results of simulation, it is verified that the imaging quality could be effectively improved by adjusting the Nyquist sampling density, optimizing the baseline pairing method and increasing the spectral channel of demultiplexer. Therefore, an adjustable baseline pairing algorithm is established for further enhancing the image quality, and the optimal design procedure in SPIDER for arbitrary targets is also summarized. The SPIDER system with adjustable baseline pairing method can broaden its application and reduce cost under the same imaging quality.

  1. Improvement of chirped pulse contrast using electro-optic birefringence scanning filter method

    International Nuclear Information System (INIS)

    Zeng Shuguang; Wang Xianglin; Wang Qishan; Zhang Bin; Sun Nianchun; Wang Fei

    2013-01-01

    A method using scanning filter to improve the contrast of chirped pulse is proposed, and the principle of this method is analyzed. The scanning filter is compared with the existing pulse-picking technique and nonlinear filtering technique. The scanning filter is a temporal gate that is independent on the intensity of the pulses, but on the instantaneous wavelengths of light. Taking the electro-optic birefringence scanning filter as an example, the application of scanning filter methods is illustrated. Based on numerical simulation and experimental research, it is found that the electro-optic birefringence scanning filter can eliminate a prepulse which is several hundred picoseconds before the main pulse, and the main pulse can maintain a high transmissivity. (authors)

  2. INCREASING MEASUREMENT ACCURACY IN ELECTRO-OPTICAL METHOD FOR MEASURING VELOCITY OF DETONATION

    Directory of Open Access Journals (Sweden)

    Mario Dobrilović

    2014-12-01

    Full Text Available In addition to other detonation parameters detonation velocity is a value that provides indirect information on the strength i.e. brisance of an explosive and explosive performance. In addition to that, detonation velocity is a value which can be measured in a relatively simpler and more precise manner, by developed and accessible methods when compared to other detonation parameters Due to its simple use, compact instruments and satisfactory accuracy, electro-optical method of detonation velocity measurement is widely used. The paper describes the electro-optical measurement method and points out the factors that affect its accuracy. The accuracy of measurement is increased and measurement uncertainty is reduced by the measurement result analysis with the application of different measurement setups.

  3. Reduced dimensionality in organic electro-optic materials: theory and defined order.

    Science.gov (United States)

    Benight, Stephanie J; Johnson, Lewis E; Barnes, Robin; Olbricht, Benjamin C; Bale, Denise H; Reid, Philip J; Eichinger, Bruce E; Dalton, Larry R; Sullivan, Philip A; Robinson, Bruce H

    2010-09-23

    Identification of electronic intermolecular electrostatic interactions that can significantly enhance poling-induced order is important to the advancement of the field of organic electro-optics. Here, we demonstrate an example of such improvement achieved through exploitation of the interaction of coumarin pendant groups in chromophore-containing macromolecules. Acentric order enhancement is explained in terms of lattice-symmetry effects, where constraint of orientational degrees of freedom alters the relationship between centrosymmetric and acentric order. We demonstrate both experimentally and theoretically that lattice dimensionality can be defined using the relationship between centrosymmetric order and acentric order. Experimentally: Acentric order is determined by attenuated total reflection measurement of electro-optic activity coupled with hyper-Rayleigh scattering measurement of molecular first hyperpolarizability, and centrosymmetric order is determined by the variable angle polarization referenced absorption spectroscopy method. Theoretically: Order is determined from statistical mechanical models that predict the properties of soft condensed matter.

  4. Method and apparatus for the electro-optic convolution of a one-dimensional signal

    International Nuclear Information System (INIS)

    1979-01-01

    Procedure for the electro-optic convolution of a signal and a filter function, whereby the one dimensional electro-optical signal would be portrayed as a line along which the clarity varies and whereby filter function is determined by one or more masks, whilst after each mask is placed a light detector, with which the light passing through the masks may be detected, whilst a one-dimensional portrayal of the signal along the masks will be developed, characterised in that a one dimensional portrayal of the signal, with the aid of an optical system in a direction across the line, will be enlarged, and that this enlarged signal in the direction of the line along the masks will be affected which the masks closing fields will contain, which are either fully transparent or are fully non-transparent. (Auth.)

  5. Complete achromatic and robustness electro-optic switch between two integrated optical waveguides

    Science.gov (United States)

    Huang, Wei; Kyoseva, Elica

    2018-01-01

    In this paper, we present a novel design of electro-optic modulator and optical switching device, based on current integrated optics technique. The advantages of our optical switching device are broadband of input light wavelength, robustness against varying device length and operation voltages, with reference to previous design. Conforming to our results of previous paper [Huang et al, phys. lett. a, 90, 053837], the coupling of the waveguides has a hyperbolic-secant shape. while detuning has a sign flip at maximum coupling, we called it as with a sign flip of phase mismatch model. The a sign flip of phase mismatch model can produce complete robust population transfer. In this paper, we enhance this device to switch light intensity controllable, by tuning external electric field based on electro-optic effect.

  6. Nuclear spin polarized alkali beams (Na, Li): Optical pumping with electro-optically modulated laser beam

    International Nuclear Information System (INIS)

    Reich, H.; Jaensch, H.J.

    1990-01-01

    An improvement of the Heidelberg source for polarized heavy ions (PSI) is described. To produce a nuclear spin polarized atomic Na beam an electro-optically modulated laser beam has been used for optical pumping. An electro-optic modulator (EOM) was constructed with a bandwidth of 1.8 GHz. Without a spin separating Stern-Gerlach magnet it is now possible to prepare a Na atomic beam in one single hyperfine magnetic substate. Thus the beam figure of merit (polarization 2 x intensity of the beam) has been improved by a factor of 4 as compared to the previous setup. Experiences with the new system collected from several beam times are discussed. (orig.)

  7. Tunable Electro-optic modulators for lidar systems and atmospheric applications

    Science.gov (United States)

    Eng, R. S.; Harris, N. W.; Summers, C. L.; Lax, B.

    1992-01-01

    In global sensing applications using different types of lidars, the spectral range and fine frequency coverages are often limited because of the finite tunabilities of molecular lasers and the number of molecular species that are available. To overcome the above obstacle, we have proposed new broadband frequency tunable electro-optic (EO) modulators that can cover a wide range from the mid-infrared to the visible as lidar sources in atmospheric sensing applications such as high resolution atmospheric molecular spectroscopy, Differential Absorption Lidar (DIAL), and laser radar imaging. The configuration of the proposed new tunable EO modulators includes an electro-optic active crystal element surrounded by a ferrite tuning element which is placed inside a microwave waveguide. The tuning is provided by an external magnetic field, which is either longitudinal or transverse, and the modulator can be either single sideband type or a double sideband type depending on the application required for the spectral purity of the modulator output.

  8. Automatic Suppression of Intense Monochromatic Light in Electro-Optical Sensors

    Science.gov (United States)

    Ritt, Gunnar; Eberle, Bernd

    2012-01-01

    Electro-optical imaging sensors are widely distributed and used for many different tasks. Due to technical improvements, their pixel size has been steadily decreasing, resulting in a reduced saturation capacity. As a consequence, this progress makes them susceptible to intense point light sources. Developments in laser technology have led to very compact and powerful laser sources of any wavelength in the visible and near infrared spectral region, offered as laser pointers. The manifold of wavelengths makes it difficult to encounter sensor saturation over the complete operating waveband by conventional measures like absorption or interference filters. We present a concept for electro-optical sensors to suppress overexposure in the visible spectral region. The key element of the concept is a spatial light modulator in combination with wavelength multiplexing. This approach allows spectral filtering within a localized area in the field of view of the sensor. The system offers the possibility of automatic reduction of overexposure by monochromatic laser radiation. PMID:23202039

  9. Pulsed-diode-pumped, all-solid-state, electro-optically controlled picosecond Nd:YAG lasers

    International Nuclear Information System (INIS)

    Gorbunkov, Mikhail V; Shabalin, Yu V; Konyashkin, A V; Kostryukov, P V; Olenin, A N; Tunkin, V G; Morozov, V B; Rusov, V A; Telegin, L S; Yakovlev, D V

    2005-01-01

    The results of the development of repetitively pulsed, diode-pumped, electro-optically controlled picosecond Nd:YAG lasers of two designs are presented. The first design uses the active-passive mode locking with electro-optical lasing control and semiconductor saturable absorber mirrors (SESAM). This design allows the generation of 15-50-ps pulses with an energy up to 0.5 mJ and a maximum pulse repetition rate of 100 Hz. The laser of the second design generates 30-ps pulses due to combination of positive and negative electro-optical feedback and the control of the electro-optical modulator by the photocurrent of high-speed semiconductor structures. (active media. lasers)

  10. Mathematical and computer modeling of electro-optic systems using a generic modeling approach

    OpenAIRE

    Smith, M.I.; Murray-Smith, D.J.; Hickman, D.

    2007-01-01

    The conventional approach to modelling electro-optic sensor systems is to develop separate models for individual systems or classes of system, depending on the detector technology employed in the sensor and the application. However, this ignores commonality in design and in components of these systems. A generic approach is presented for modelling a variety of sensor systems operating in the infrared waveband that also allows systems to be modelled with different levels of detail and at diffe...

  11. The Enhancement of Target Localization Using Ship-Borne Electro-Optical Stabilized Platform

    OpenAIRE

    Jaehoon Ha; Byungmo Kang; Kilho Hong; Jungsoo Park

    2016-01-01

    Electro-optical (EO) stabilized platforms have been widely used for surveillance and reconnaissance on various types of vehicles, from surface ships to unmanned air vehicles (UAVs). EO stabilized platforms usually consist of an assembly of structure, bearings, and motors called gimbals in which a gyroscope is installed. EO elements such as a CCD camera and IR camera, are mounted to a gimbal, which has a range of motion in elevation and azimuth and can designate and track a target. In addition...

  12. British Standard method for determining the luminance distribution of electro-optical x-ray image intensifiers

    International Nuclear Information System (INIS)

    1982-01-01

    Under the direction of the Light Electrical Engineering Standards Committee, a British Standard method has been prepared for determining the luminance distribution of electro-optical X-ray image intensifiers. The luminance distribution is determined from the measurement of the luminance over the area of the output image related to conditions of uniform exposure rate in the entrance plane of an electro-optical X-ray image intensifier. (U.K.)

  13. High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate

    Science.gov (United States)

    Witmer, Jeremy D.; Valery, Joseph A.; Arrangoiz-Arriola, Patricio; Sarabalis, Christopher J.; Hill, Jeff T.; Safavi-Naeini, Amir H.

    2017-04-01

    Future quantum networks, in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality (Q) factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical Q factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices.

  14. Novel Electro-Optical Coupling Technique for Magnetic Resonance-Compatible Positron Emission Tomography Detectors

    Directory of Open Access Journals (Sweden)

    Peter D. Olcott

    2009-03-01

    Full Text Available A new magnetic resonance imaging (MRI-compatible positron emission tomography (PET detector design is being developed that uses electro-optical coupling to bring the amplitude and arrival time information of high-speed PET detector scintillation pulses out of an MRI system. The electro-optical coupling technology consists of a magnetically insensitive photodetector output signal connected to a nonmagnetic vertical cavity surface emitting laser (VCSEL diode that is coupled to a multimode optical fiber. This scheme essentially acts as an optical wire with no influence on the MRI system. To test the feasibility of this approach, a lutetium-yttrium oxyorthosilicate crystal coupled to a single pixel of a solid-state photomultiplier array was placed in coincidence with a lutetium oxyorthosilicate crystal coupled to a fast photomultiplier tube with both the new nonmagnetic VCSEL coupling and the standard coaxial cable signal transmission scheme. No significant change was observed in 511 keV photopeak energy resolution and coincidence time resolution. This electro-optical coupling technology enables an MRI-compatible PET block detector to have a reduced electromagnetic footprint compared with the signal transmission schemes deployed in the current MRI/PET designs.

  15. Novel electro-optical coupling technique for magnetic resonance-compatible positron emission tomography detectors.

    Science.gov (United States)

    Olcott, Peter D; Peng, Hao; Levin, Craig S

    2009-01-01

    A new magnetic resonance imaging (MRI)-compatible positron emission tomography (PET) detector design is being developed that uses electro-optical coupling to bring the amplitude and arrival time information of high-speed PET detector scintillation pulses out of an MRI system. The electro-optical coupling technology consists of a magnetically insensitive photodetector output signal connected to a nonmagnetic vertical cavity surface emitting laser (VCSEL) diode that is coupled to a multimode optical fiber. This scheme essentially acts as an optical wire with no influence on the MRI system. To test the feasibility of this approach, a lutetium-yttrium oxyorthosilicate crystal coupled to a single pixel of a solid-state photomultiplier array was placed in coincidence with a lutetium oxyorthosilicate crystal coupled to a fast photomultiplier tube with both the new nonmagnetic VCSEL coupling and the standard coaxial cable signal transmission scheme. No significant change was observed in 511 keV photopeak energy resolution and coincidence time resolution. This electro-optical coupling technology enables an MRI-compatible PET block detector to have a reduced electromagnetic footprint compared with the signal transmission schemes deployed in the current MRI/PET designs.

  16. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    International Nuclear Information System (INIS)

    Wissmann, Laurens-Georg

    2012-08-01

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  17. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wissmann, Laurens-Georg

    2012-08-15

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  18. Optical modulation techniques for analog signal processing and CMOS compatible electro-optic modulation

    Science.gov (United States)

    Gill, Douglas M.; Rasras, Mahmoud; Tu, Kun-Yii; Chen, Young-Kai; White, Alice E.; Patel, Sanjay S.; Carothers, Daniel; Pomerene, Andrew; Kamocsai, Robert; Beattie, James; Kopa, Anthony; Apsel, Alyssa; Beals, Mark; Mitchel, Jurgen; Liu, Jifeng; Kimerling, Lionel C.

    2008-02-01

    Integrating electronic and photonic functions onto a single silicon-based chip using techniques compatible with mass-production CMOS electronics will enable new design paradigms for existing system architectures and open new opportunities for electro-optic applications with the potential to dramatically change the management, cost, footprint, weight, and power consumption of today's communication systems. While broadband analog system applications represent a smaller volume market than that for digital data transmission, there are significant deployments of analog electro-optic systems for commercial and military applications. Broadband linear modulation is a critical building block in optical analog signal processing and also could have significant applications in digital communication systems. Recently, broadband electro-optic modulators on a silicon platform have been demonstrated based on the plasma dispersion effect. The use of the plasma dispersion effect within a CMOS compatible waveguide creates new challenges and opportunities for analog signal processing since the index and propagation loss change within the waveguide during modulation. We will review the current status of silicon-based electrooptic modulators and also linearization techniques for optical modulation.

  19. Dataset on the absorption of PCDTBT:PC70BM layers and the electro-optical characteristics of air-stable, large-area PCDTBT:PC70BM-based polymer solar cell modules, deposited with a custom built slot-die coater

    Directory of Open Access Journals (Sweden)

    Dimitar I. Kutsarov

    2017-04-01

    Full Text Available The data presented in this article is related to the research article entitled “Fabrication of air-stable, large-area, PCDTBT:PC70BM polymer solar cell modules using a custom built slot-die coater” (D.I. Kutsarov, E. New, F. Bausi, A. Zoladek-Lemanczyk, F.A. Castro, S.R.P. Silva, 2016 [1]. The repository name and reference number for the raw data from the abovementioned publication can be found under: https://doi.org/10.15126/surreydata.00813106. In this data in brief article, additional information about the absorption properties of PCDTBT:PC70BM layers deposited from a 12.5 mg/ml and 15 mg/ml photoactive layer dispersion are shown. Additionally, the best and average J-V curves of single cells, fabricated from the 10 and 15 mg/ml dispersions, are presented.

  20. Electro-optic correlator for large-format microwave interferometry: Up-conversion and correlation stages performance analysis

    Science.gov (United States)

    Ortiz, D.; Casas, Francisco J.; Ruiz-Lombera, R.; Mirapeix, J.

    2017-04-01

    In this paper, a microwave interferometer prototype with a near-infra-red optical correlator is proposed as a solution to get a large-format interferometer with hundreds of receivers for radio astronomy applications. A 10 Gbits/s Lithium Niobate modulator has been tested as part of an electro-optic correlator up-conversion stage that will be integrated in the interferometer prototype. Its internal circuitry consists of a single-drive modulator biased by a SubMiniature version A (SMA) connector allowing to up-convert microwave signals with bandwidths up to 12.5 GHz to the near infrared band. In order to characterize it, a 12 GHz tone and a bias voltage were applied to the SMA input using a polarization tee. Two different experimental techniques to stabilize the modulator operation point in its minimum optical carrier output power are described. The best achieved results showed a rather stable spectrum in amplitude and wavelength at the output of the modulator with an optical carrier level 23 dB lower than the signal of interest. On the other hand, preliminary measurements were made to analyze the correlation stage, using 4f and 6f optical configurations to characterize both the antenna/fiber array configuration and the corresponding point spread function.

  1. Characterization of devices, circuits, and high-temperature superconductor transmission lines by electro-optic testing

    Science.gov (United States)

    Whitaker, John F.

    1991-01-01

    The development of a capability for testing transmission lines, devices, and circuits using the optically-based technique of electro-optics sampling was the goal of this project. Electro-optic network analysis of a high-speed device was demonstrated. The project involved research on all of the facets necessary in order to realize this result, including the discovery of the optimum electronic pulse source, development of an adequate test fixture, improvement of the electro-optic probe tip, and identification of a device which responded at high frequency but did not oscillate in the test fixture. In addition, during the process of investigating patterned high-critical-temperature superconductors, several non-contacting techniques for the determination of the transport properties of high T(sub c) films were developed and implemented. These are a transient, optical pump-probe, time-resolved reflectivity experiment, an impulsive-stimulated Raman scattering experiment, and a terahertz-beam coherent-spectroscopy experiment. The latter technique has enabled us to measure both the complex refractive index of an MgO substrate used for high-T(sub c) films and the complex conductivity of a YBa2Cu3O(7-x) sample. This information was acquired across an extremely wide frequency range: from the microwave to the submillimeter-wave regime. The experiments on the YBCO were conducted without patterning of, or contact to, the thin film. Thus, the need for the more difficult transmission-line experiments was eliminated. Progress in all of these areas was made and is documented in a number of papers. These papers may be found in the section listing the abstracts of the publications that were issued during the course of the research.

  2. Electro-Optic Sampling of Transient Electric Fields from Charged Particle Beams

    Energy Technology Data Exchange (ETDEWEB)

    Fitch, Michael James [Rochester U.

    2000-01-01

    The passage of a relativistic charged particle beam bunch through a structure is accompanied by transient electromagnetic fields. By causality, these fields must be behind the bunch, and are called "wakefields." The wakefields act back on the beam, and cause instabilities such as the beam break-up instability, and the headtail instability, which limit the luminosity of linear colliders. The wakefields are particularly important for short bunches with high charge. A great deal of effort is devoted to analytical and numerical calculations of wakefields, and wakefield effects. Experimental numbers are needed. In this thesis, we present measurements of the transient electric fields induced by a short high-charge electron bunch passing through a 6-way vacuum cross. These measurements are performed in the time domain using electro-optic sampling with a time resolution of approximately 5 picoseconds. With different orientations of the electro-optic crystal, we have measured different vector components of the electric field. The Fourier transform of the time-domain data yields the product of the beam impedance with the excitation spectrum of the bunch. Since the bunch length is known from streak camera measurements, the k loss factor is directly obtained. There is reasonably good agreement between the experimental k loss factor with calculations from the code MAFIA. To our knowledge, this is the first direct measurement of the k loss factor for bunch lengths shorter than one millimeter ( nns). We also present results of magnetic bunch compression (using a dipole chicane) of a high-charge photoinjector beam for two different UV laser pulse lengths on the pholocalhode. Al best compression, a 13.87 nC bunch was compressed to 0.66 mm (2.19 ps) rms, or a peak current of 3 kA. Other results from the photoinjeclor are given, and the laser system for pholocalhode excitation and electro-optic sampling is described.

  3. Nanomaterials for LightManagement in Electro-Optical Devices

    Energy Technology Data Exchange (ETDEWEB)

    Truong, Vo-Van [Concordia University, Montréal, Québec, H4B 1R6, Canada; Singh, Jai [Charles Darwin University, Darwin, Australia; Tanemura, Sakae [Japan Fine Ceramics Center, Nagoya, Japan; Hu, Michael Z. [ORNL

    2012-01-01

    In the past decade, nanostructured materials and nanoparticles have emerged as the necessary ingredients for electrooptical applications and enhancement of device performance, in particular by making use of the light management aspects of the nanomaterials. The application areas that are being transformed profoundly include smart coating devices (e.g., electrochromic, photochromic, and thermochromic devices), solar energy, and sensing. Despite the large volume of work in the past on smart coating devices, and in particular on electrochromic devices and thermochromic fenestrations, for optical transmission or reflection control, applications remain limited because of slow response time and nonuniformity in the case of large surfaces. Recent works in the field indicate that nanostructured electrochromic coatings would be an integral part of the solution to the above problem. One aspect that can thus be focused on would be the fabrication and characterization of the nanostructured smart coating materials and their compatibility with other layers in the overall smart coating device. In the area of solar photovoltaics, nanomaterials have been used in designing light-trapping schemes for inorganic as well as organic solar cells. One particular category of solar cells that has attracted much interest is the plasmonic solar cells in which metallic nanoparticles are incorporated, helping in enhancing their energy conversion efficiency. Nanostructured solar cells would eventually develop into a 'game changing' technology for making solar cells that are affordable and highly efficient, providing a sizeable alternative energy source for our ever-increasing energy needs. Sensors based on the optical properties of constituting nanostructures and nanoparticles also form a most interesting class of bio- and electrochemical sensing devices. The possibility of synthetizing nanoparticles and structures of specifically desired sizes and shapes has indeed opened a whole new

  4. Development of laser marking system with electro-optic Q-switch

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Kim, Jeong Moog; Kim, Kwang Suk; Park, Seung Kyu; Baik, Sung Hoon

    1995-11-01

    We developed a high repetition electro-optic Q switch Nd:YAG laser and scan system for laser marking. We localized the scan mirrors and their mounts. We made the database for the optical properties of commercial flat-field lenses with our optics design software. We fabricated the detailed network between the galvanometer based beam scanning system and the laser generator. To accelerate the commercialization by the joint company, the training and transfer of technology were pursued in the joint participation by company researchers from the early stage. (author). 8 refs., 6 tabs., 27 figs.

  5. Development of laser marking system with electro-optic Q-switch

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Kim, Jeong Moog; Kim, Kwang Suk; Park, Seung Kyu; Baik, Sung Hoon.

    1995-11-01

    We developed a high repetition electro-optic Q switch Nd:YAG laser and scan system for laser marking. We localized the scan mirrors and their mounts. We made the database for the optical properties of commercial flat-field lenses with our optics design software. We fabricated the detailed network between the galvanometer based beam scanning system and the laser generator. To accelerate the commercialization by the joint company, the training and transfer of technology were pursued in the joint participation by company researchers from the early stage. (author). 8 refs., 6 tabs., 27 figs

  6. Electro-optic sampling of THz pulses at the CTR source at FLASH

    International Nuclear Information System (INIS)

    Wunderlich, Steffen

    2012-06-01

    Several applications in material science, non-linear optics and solid-state physics require short pulses with a high pulse energy of radiation in the far-infrared and in the terahertz (THz) regime in particular. As described in the following, coherent transition radiation generated by high-relativistic electron bunches at FLASH provides broadband single-cycle pulses of sub-picosecond length. The pulses are characterized using the quantitative and time-resolved technique of electro-optic sampling showing peak field strengths in the order of 1 MV/cm.

  7. Electro-optic tunable multi-channel filter in two-dimensional ferroelectric photonic crystals

    International Nuclear Information System (INIS)

    Fu, Yulan; Zhang, Jiaxiang; Hu, Xiaoyong; Gong, Qihuang

    2010-01-01

    An electro-optic tunable multi-channel filter is presented, which is based on a two-dimensional ferroelectric photonic crystal made of barium titanate. The filtering properties of the photonic crystal filter can be tuned by an applied voltage or by adjusting the structural parameters. The channel shifts about 30 nm under excitation of an applied voltage of 54.8 V. The influences of the structural disorders caused by the perturbations in the radius or the position of air holes on the filtering properties are also analyzed

  8. Graphene photonics for resonator-enhanced electro-optic devices and all-optical interactions

    Science.gov (United States)

    Englund, Dirk R.; Gan, Xuetao

    2017-03-21

    Techniques for coupling light into graphene using a planar photonic crystal having a resonant cavity characterized by a mode volume and a quality factor and at least one graphene layer positioned in proximity to the planar photonic crystal to at least partially overlap with an evanescent field of the resonant cavity. At least one mode of the resonant cavity can couple into the graphene layer via evanescent coupling. The optical properties of the graphene layer can be controlled, and characteristics of the graphene-cavity system can be detected. Coupling light into graphene can include electro-optic modulation of light, photodetection, saturable absorption, bistability, and autocorrelation.

  9. OPPORTUNITIES OF ELECTRO-OPTIC VISUALIZATION PRACTICAL APPLICATIONS ON BOARD THE AIRCRAFT

    Directory of Open Access Journals (Sweden)

    Sergey B. Stukalov

    2017-01-01

    Full Text Available The article covers the following issues: the development and practical application of airborne electro-optic systems in the civil aviation aircraft. They provide flight visual information for the pilot day and night in visual and instrument weather conditions. The legal documents establishing the requirements for the application of this type of electro-optic systems in aircraft are presented. The classification of airborne electro-optic systems, commonly named as electronic visualization systems is analyzed. The ways of implementing the recommendations in their construction are considered. There have been analyzed the possibilities of systems of different classes: enhanced vision systems (EVS, synthetic vision systems (SVS, combine vision systems (CVS and on-board vision systems with advanced visualization features, Enhanced Flight Vision Systems (EFVS. It is determined that nowadays EVS systems are considered to be the potential application systems. In order to analyze the possibilities of practical application of such systems in the issues of flight safety at low altitude and landing, flight experiments of the system installed on a light helicopter were conducted. The research introduces the results of flight experiments on the practical work of television and infrared (IR viewing channels of a promising typical system in simple and complex observation conditions. Based on the results of flight experiments, a conclusion can be made about the relevance of practical application of electronic visualization systems on board the aircraft to ensure flight safety. It is determined that the systems can be used in flight both for land observation tasks and ensuring a safe flight. When flying the helicopter at low altitude and landing procedures the pilot should use visual information from the rear hemisphere of the lower tail unit by electro-optical visualization system. It was elicited that in the infrared (IR channel and the fast rotation of

  10. Electro-optical characterization of MPPC detectors for the ASTRI Cherenkov telescope camera

    Energy Technology Data Exchange (ETDEWEB)

    Marano, D., E-mail: davide.marano@oact.inaf.it [INAF, Osservatorio Astrofisico di Catania, Via S. Sofia 78, I-95123 Catania (Italy); Belluso, M.; Bonanno, G.; Billotta, S.; Grillo, A.; Garozzo, S.; Romeo, G. [INAF, Osservatorio Astrofisico di Catania, Via S. Sofia 78, I-95123 Catania (Italy); Catalano, O.; La Rosa, G.; Sottile, G.; Impiombato, D.; Giarrusso, S. [INAF, Istituto di Astrofisica Spaziale e Fisica Cosmica di Palermo, Via U. La Malfa 153, I-90146 Palermo (Italy)

    2014-12-21

    This work addresses a systematic and in-depth electro-optical characterization of the Multi-Pixel Photon Counter (MPPC) sensors constituting the camera detection system at the focal plane of the ASTRI telescope prototype. The paper reports the experimental results of a large set of measurements on the MPPC devices in order to provide a reliable qualification of the detector performance and evaluate its compliance with the telescope focal plane requirements. In particular, breakdown voltage, internal gain, dark count rate, cross-talk and extra-charge probability, and absolute photon detection efficiency measurements are performed on the basic sensor device unit as a function of the detector operating conditions.

  11. Ultra-low power fiber-coupled gallium arsenide photonic crystal cavity electro-optic modulator.

    Science.gov (United States)

    Shambat, Gary; Ellis, Bryan; Mayer, Marie A; Majumdar, Arka; Haller, Eugene E; Vučković, Jelena

    2011-04-11

    We demonstrate a gallium arsenide photonic crystal cavity injection-based electro-optic modulator coupled to a fiber taper waveguide. The fiber taper serves as a convenient and tunable waveguide for cavity coupling with minimal loss. Localized electrical injection of carriers into the cavity region via a laterally doped p-i-n diode combined with the small mode volume of the cavity enable ultra-low energy modulation at sub-fJ/bit levels. Speeds of up to 1 GHz are demonstrated with photoluminescence lifetime measurements revealing that the ultimate limit goes well into the tens of GHz. © 2011 Optical Society of America

  12. Electro-optic sampling of THz pulses at the CTR source at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wunderlich, Steffen

    2012-06-15

    Several applications in material science, non-linear optics and solid-state physics require short pulses with a high pulse energy of radiation in the far-infrared and in the terahertz (THz) regime in particular. As described in the following, coherent transition radiation generated by high-relativistic electron bunches at FLASH provides broadband single-cycle pulses of sub-picosecond length. The pulses are characterized using the quantitative and time-resolved technique of electro-optic sampling showing peak field strengths in the order of 1 MV/cm.

  13. Electro-Optical Sensing Apparatus and Method for Characterizing Free-Space Electromagnetic Radiation

    Science.gov (United States)

    Zhang, Xi-Cheng; Libelo, Louis Francis; Wu, Qi

    1999-09-14

    Apparatus and methods for characterizing free-space electromagnetic energy, and in particular, apparatus/method suitable for real-time two-dimensional far-infrared imaging applications are presented. The sensing technique is based on a non-linear coupling between a low-frequency electric field and a laser beam in an electro-optic crystal. In addition to a practical counter-propagating sensing technique, a co-linear approach is described which provides longer radiated field--optical beam interaction length, thereby making imaging applications practical.

  14. Progress in Nano-Electro-Optics III Industrial Applications and Dynamics of the Nano-Optical System

    CERN Document Server

    Ohtsu, Motoichi

    2005-01-01

    This unique monograph series "Progress in Nano-Electro Optics" reviews the results of advanced studies of electro-optics on the nanometric scale. This third volume covers the most recent topics of theoretical and experimental interest including classical and quantum optics, organic and inorganic material science and technology, surface science, spectroscopy, atom manipulation, photonics, and electronics. Each chapter is written by one or more leading scientists from the relevant field. Thus, high-quality scientific and technical information is provided to scientists, engineers, and students engaged in nano-electro optics and nanophotonics research. The first two volumes addressed the "Basics and Theory of Near Field Optics" (2002) and "Novel Devices and Atom Manipulation" (2003).

  15. Electromagnetic field and high energy electron beam interaction modelling for high-speed electro-optical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sabry, R.

    1996-12-31

    An electro-optical coupling scheme based on the interaction of high energy electrons with a short-wavelength radiation for optoelectronic interfacing in the near infrared region was proposed and analysed. The technique could be used for accessing the ultra-wide band width of the optical channel. A relativistic electron beam-field interaction scheme as the electro-optical interface for optoelectronic applications was proposed. A relationship between the wavelength of optical emission and the spatial period of the modulating electromagnetic field based on the Doppler effect, was derived. The approach provided a explanation of electro-optical coupling and the associated bandwidth without specifying an external modulating field. The coupling process was later analyzed with the modulating field specified. 89 refs., 25 figs.

  16. Study of electro-optic effect in asymmetrically ramped AlInGaAs multiple quantum well structures

    Energy Technology Data Exchange (ETDEWEB)

    Sadiq, Muhammad Usman; Peters, Frank H.; Corbett, Brian [Tyndall National Institute, Lee Maltings, Cork (Ireland); Department of Physics, University College Cork, Cork (Ireland); O' Callaghan, James; Roycroft, Brendan; Thomas, Kevin; Pelucchi, Emanuele [Tyndall National Institute, Lee Maltings, Cork (Ireland)

    2016-04-15

    We investigate the electro-optic properties of two oppositely ramped asymmetric quantum well structures in the AlInGaAs material system. The grading of the bandgap in the quantum wells has been achieved by changing the ratio of Al to Ga in the quaternary alloy during the epitaxial growth. The surface normal photo-response and the Fabry-Perot fringe shift in straight waveguides are compared for both structures as a function of applied voltage at 1550 nm for TE-polarized light. The measurements show a change in the refractive index due to a red shift of the excitonic resonances due to the quantum-confined Stark effect. The 10 quantum well structure with a ramp up of the bandgap in the growth direction leads to the figure of merit of the voltage for a π phase shift, V{sub π} by length, L, V{sub π} x L, of 6 as compared to 7 V . mm in the structure with a ramp in opposite direction. Further investigations show that the reduction in V{sub π} is due to increased absorption at high reverse bias which induces a non-linear phase change. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  17. The structural and electro-optical characteristics of AZO/Cr:Cu/AZO transparent conductive film

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Tien-Chai [Department of Electrical Engineering, Kun Shan University, No. 195, Kun-Da Road, Yung-Kang Dist., Tainan 71003, Taiwan, ROC (China); Huang, Wen-Chang, E-mail: wchuang@mail.ksu.edu.tw [Department of Electro-Optical Engineering, Kun Shan University, No. 195, Kun-Da Road, Yung-Kang Dist., Tainan 71003, Taiwan, ROC (China); Tsai, Fu-Chun [Department of Electro-Optical Engineering, Kun Shan University, No. 195, Kun-Da Road, Yung-Kang Dist., Tainan 71003, Taiwan, ROC (China)

    2015-08-31

    A novel triple-layered transparent conductive film, AZO/Cr:Cu/AZO (ACCA), was presented in the paper. The structural and electro-optical properties of the ACCA film were discussed. The thickness of the middle metal layer was constant and those of the AZO layers were varied. The ACCA film shows an obvious ZnO (002) c-axis preferential growth. No diffraction peaks related to Cr and Cu were observed through x-ray diffraction analysis. The middle Cr:Cu layer showed a thickness of 8.16 nm with a continuous and amorphous structure by the observation of a high-resolution transmission electron microscopy (HR-TEM). For the electro-optical characteristic, a best figure of merit (FOM) value of 3.54 × 10{sup −3} Ω{sup −1} with a corresponding transmittance of 85% was obtained at the thickness of 116 nm of ACCA film. The high FOM value of the film is due to the improvement of conductivity and small sacrifices of transparency. - Highlights: • A novel triple-layered transparent conductive film, AZO/Cr:Cu/AZO is developed. • Chromium is added to copper to reduce the oxidation–reduction reaction. • The film has a FOM of 3.54 × 10{sup −3} Ω{sup −1} with a corresponding transmittance of 85%. • The Cr:Cu layer shows a continuous and amorphous structure.

  18. Electro-optical study of the exposure of Azospirillum brasilense carbohydrate epitopes.

    Science.gov (United States)

    Guliy, Olga I; Matora, Larisa Yu; Dykman, Lev A; Staroverov, Sergey A; Burygin, Gennady L; Bunin, Viktor D; Burov, Andrei M; Ignatov, Oleg V

    2015-01-01

    The exposure of Azospirillum brasilense carbohydrate epitopes was investigated by electro-optical analysis of bacterial cell suspensions. To study changes in the electro-optical (EO) properties of the suspensions, we used antibodies generated to the complete lipopolysaccharide of A. brasilense type strain Sp7 and also antibodies to the smooth and rough O polysaccharides of Sp7. After 18 hr of culture growth, the EO signal of the suspension treated with antibodies to smooth O polysaccharide was approximately 20% lower than that of the suspension treated with antibodies to complete lipopolysaccharide (control). After 72 hr of culture growth, the strongest EO signal was observed for the cells treated with antibodies to rough O polysaccharide (approximately 46% greater than the control), whereas for the cells treated with antibodies to smooth O polysaccharide, it was much lower (approximately 23% of the control). These data were confirmed by electron microscopy. The results of the study may have importance for the rapid evaluation of changes in lipopolysaccharide form in microbial biotechnology, when the antigenic composition of the bacterial surface requires close control.

  19. Measurement of z-axis deviation angle of electro-optic crystal by conoscopic interference

    Science.gov (United States)

    Li, Dong; Liu, Yong; Liu, Xu; Jiang, Hongzhen; Zheng, Fanglan

    2016-09-01

    Properties of plasma electrode pockels cell is directly affected by the Z-axis deviation angle of the electro-optic crystal. Therefore, high precision measurement of the Z-axis deviation angle is indispensable. By using conoscopic interference technique, a measurement system for Z-axis deviation angle of electro-optic crystal is introduced. The principle of conoscopic interference method is described in detail, and a series of techniques are implied in this measurement system to improve the accuracy. High-precision positioning method of the crystal based on Michelson interference is proposed to determine the normal consistency of crystal, which can ensure the high positioning repeatability of crystal in the measurement process. The positioning comparison experiment of the crystal shows that the standard deviation of our method is less than 1pixel, which is much better than the traditional method (nearly 4pixels). Moreover, melatope extraction algorithm of optical axis based on image matching technique is proposed to ensure the melatope can be extracted in high precision. Calibration method of the normal of transmission surface of crystal is also proposed. The experiment results show that the PV and rms of Z-axis deviation angle is less than 0.05mrad and 0.02mrad, respectively. The repeatability accuracy is less than 0.01mrad.

  20. Accurate identification of whispering gallery mode patterns of gyrotron with stabilized electro-optic imaging system

    Science.gov (United States)

    Lee, Ingeun; Sawant, Ashwini; Choe, Mun Seok; Lee, Dong-Joon; Choi, EunMi

    2018-01-01

    The precise field pattern measurement and analysis of a typical whispering gallery mode excited in a gyrotron are important to understand the interaction physics of the gyrotron. We precisely analyzed the characteristic of a whispering gallery mode, rotating TE6,2 mode, by a photonic-assisted W-band (75-110 GHz) electro-optic imaging measurement system. The whispering gallery mode in the W-band region diverges fast in free space as it propagates from the radiation port. Therefore, scanning the field patterns of a device-under-test should be performed as close as possible to identify the device's characteristics. We successfully accomplished visualizing highly accurate field patterns of a rotating and mixed whispering gallery mode based on the measured electric field magnitude and phase by using dual optical fiber-scale electro-optic (EO) probes. We observed the distorted fields when the typical open-ended waveguide and a general EO probe were used in the extremely near-field zone, whereas a very precise field was measured in a minimally invasive way by the proposed EO probe. The measured mode patterns were quantitatively analyzed by using a cross correlation function and a mode purity equation. This work promises a way to provide accurate electric field information in the generation of the whispering gallery mode in the millimeter and submillimeter regime.

  1. Sol-Gel Material-Enabled Electro-Optic Polymer Modulators

    Science.gov (United States)

    Himmelhuber, Roland; Norwood, Robert A.; Enami, Yasufumi; Peyghambarian, Nasser

    2015-01-01

    Sol-gels are an important material class, as they provide easy modification of material properties, good processability and are easy to synthesize. In general, an electro-optic (EO) modulator transforms an electrical signal into an optical signal. The incoming electrical signal is most commonly information encoded in a voltage change. This voltage change is then transformed into either a phase change or an intensity change in the light signal. The less voltage needed to drive the modulator and the lower the optical loss, the higher the link gain and, therefore, the better the performance of the modulator. In this review, we will show how sol-gels can be used to enhance the performance of electro-optic modulators by allowing for designs with low optical loss, increased poling efficiency and manipulation of the electric field used for driving the modulator. The optical loss is influenced by the propagation loss in the device, as well as the losses occurring during fiber coupling in and out of the device. In both cases, the use of sol-gel materials can be beneficial due to the wide range of available refractive indices and low optical attenuation. The influence of material properties and synthesis conditions on the device performance will be discussed. PMID:26225971

  2. Development of Nanostructured Antireflection Coatings for Infrared and Electro-Optical Systems

    Directory of Open Access Journals (Sweden)

    Gopal G. Pethuraja

    2017-07-01

    Full Text Available Electro-optic infrared technologies and systems operating from ultraviolet (UV to long-wave infrared (LWIR spectra are being developed for a variety of defense and commercial systems applications. Loss of a significant portion of the incident signal due to reflection limits the performance of electro-optic infrared (IR sensing systems. A critical technology being developed to overcome this limitation and enhance the performance of sensing systems is advanced antireflection (AR coatings. Magnolia is actively involved in the development and advancement of nanostructured AR coatings for a wide variety of defense and commercial applications. Ultrahigh AR performance has been demonstrated for UV to LWIR spectral bands on various substrates. The AR coatings enhance the optical transmission through optical components and devices by significantly minimizing reflection losses, a substantial improvement over conventional thin-film AR coating technologies. Nanostructured AR coatings have been fabricated using a nanomanufacturable self-assembly process on substrates that are transparent for a given spectrum of interest ranging from UV to LWIR. The nanostructured multilayer structures have been designed, developed and optimized for various optoelectronic applications. The optical properties of optical components and sensor substrates coated with AR structures have been measured and the process parameters fine-tuned to achieve a predicted high level of performance. In this paper, we review our latest work on high quality nanostructure-based AR coatings, including recent efforts on the development of nanostructured AR coatings on IR substrates.

  3. Electro-optic detection of subwavelength terahertz spot sizes in the near field of a metal tip

    NARCIS (Netherlands)

    Van der Valk, N.C.J.; Planken, P.C.M.

    2002-01-01

    We report on a method to obtain a subwavelength resolution in terahertz time-domain imaging. In our method, a sharp copper tip is used to locally distort and concentrate the THz electric field. The distorted electric field, present mainly in the near field of the tip, is electro-optically measured

  4. On the design and construction of drifting-mine test targets for sonar, radar and electro-optical detection experiments

    NARCIS (Netherlands)

    Dol, H.S.

    2014-01-01

    The timely detection of small hazardous objects at the sea surface, such as drifting mines, is challenging for ship-mounted sensor systems, both for underwater sensor systems like sonar and above-water sensor systems like radar and electro-optics (lidar, infrared/visual cameras). This is due to the

  5. Electro-optic and thermo-optic and properties of phase separated polymer dispersed liquid crystal films

    Czech Academy of Sciences Publication Activity Database

    Malik, P.; Bubnov, Alexej M.; Raina, K.K.

    2008-01-01

    Roč. 494, č. 12 (2008), s. 242-251 ISSN 1542-1406 Institutional research plan: CEZ:AV0Z10100520 Keywords : polymer dispersed liquid crystals * electro-optics Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.537, year: 2008

  6. Electro-optical techniques for the investigation of photoplethysmographic signals in human abdominal organs

    International Nuclear Information System (INIS)

    Kyriacou, P A; Crerar-Gilber, A; Langford, R M; Jones, D P

    2006-01-01

    There is a need for reliable continuous monitoring of abdominal organ oxygen saturation (SpO 2 ). Splanchnic ischaemia may ultimately lead to cellular hypoxia and necrosis and may well contribute to the development of multiple organ failures and increased mortality. A new reflectance electro-optical photoplethysmographic (PPG) probe and signal processing system were developed. PPG signals from abdominal organs (bowel, liver, and kidney) and the finger were obtained from 12 anaesthetised patients. The amplitudes of the abdominal organ PPGs were, on average, approximately the same as those obtained simultaneously from the finger. These observations suggest that pulse oximetry may be a valid monitoring technique for abdominal organs such as the bowel liver and kidney

  7. Aluminum nitride electro-optic phase shifter for backend integration on silicon.

    Science.gov (United States)

    Zhu, Shiyang; Lo, Guo-Qiang

    2016-06-13

    An AlN electro-optic phase shifter with a parallel plate capacitor structure is fabricated on Si using the back-end complementary metal-oxide-semiconductor technology, which is feasible for multilayer photonics integration. The modulation efficiency (Vπ⋅Lπ product) measured from the fabricated waveguide-ring resonators and Mach-Zehnder Interferometer (MZI) modulators near the 1550-nm wavelength is ∼240 V⋅cm for the transverse electric (TE) mode and ∼320 V⋅cm for the transverse magnetic (TM) mode, from which the Pockels coefficient of the deposited AlN is deduced to be ∼1.0 pm/V for both TE and TM modes. The methods for further modulation efficiency improvement are addressed.

  8. Polarisation-insensitive strip-loaded waveguide for electro-optic modulators and switches

    Science.gov (United States)

    Sun, Jie; Chen, Changming; Gao, Lei; Sun, Xiaoqiang; Gao, Weinan; Ma, Chunsheng; Zhang, Daming

    2009-06-01

    A polarisation-insensitive electro-optic (EO) waveguide consisting of a dye-doped TiO2/SiO2 slab and a SU-8 strip-loaded rib is designed and fabricated. By optimizing the refractive index and size of waveguide, a trade-off between polarisation-insensitive condition and large EO efficiency (optical field interaction with the EO material) is obtained. The average transmission loss of the waveguide is less than 2.0 dB/cm. A Mach-Zehnder (M-Z) interferometer intensity modulator based on this waveguide with excellent poling stability is fabricated and measured, exhibiting 7 V half-wave voltage with 1.8 cm EO interaction length and 2.7 cm total length. This strip-loaded structure is proved to be a valuable application in EO modulators and switches.

  9. Electro-optical characteristics of a liquid crystal cell with graphene electrodes

    Directory of Open Access Journals (Sweden)

    Nune H. Hakobyan

    2017-12-01

    Full Text Available In liquid crystal devices (LCDs the indium tin oxide (ITO films are traditionally used as transparent and conductive electrodes. However, today, due to the development of multichannel optical communication, the need for flexible LCDs and multilayer structures has grown. For this application ITO films cannot be used in principle. For this problem, graphene (an ultrathin material with unique properties, e.g., high optical transparency, chemical inertness, excellent conductivity is an excellent candidate. In this work, the electro-optical and dynamic characteristics of a liquid crystal (LC cell with graphene and ITO transparent conducting layers are investigated. To insure uniform thickness of the LC layer, as well as the same orientation boundary conditions, a hybrid LC cell containing graphene and ITO conductive layers has been prepared. The characteristics of LC cells with both types of conducting layers were found to be similar, indicating that graphene can be successfully used as a transparent conductive layer in LC devices.

  10. A hybrid electro-optic polymer and TiO2 double-slot waveguide modulator.

    Science.gov (United States)

    Qiu, Feng; Spring, Andrew M; Maeda, Daisuke; Ozawa, Masa-aki; Odoi, Keisuke; Otomo, Akira; Aoki, Isao; Yokoyama, Shiyoshi

    2015-02-24

    An electro-optic (EO) modulator using a TiO2 slot hybrid waveguide has been designed and fabricated. Optical mode calculations revealed that the mode was primarily confined within the slots when using a double-slot configuration, thus achieving a high EO activity experimentally. The TiO2 slots also acted as an important barrier to induce an enhanced DC field during the poling of the EO polymer and the driving of the EO modulator. The hybrid phase modulator exhibited a driving voltage (Vπ) of 1.6 V at 1550 nm, which can be further reduced to 0.8 V in a 1 cm-long push-pull Mach-Zehnder interferometer (MZI) structure. The modulator demonstrated a low propagation loss of 5 dB/cm and a relatively high end-fire coupling efficiency.

  11. Fabrication of n-ZnO-NPs/p Si Heterojunction and Its Electro-optical Characterization

    International Nuclear Information System (INIS)

    Muhmmad Kashif; Syed Mohd Usman Ali; Uda Hashim

    2011-01-01

    In the present study, n-ZnO-NPs nano structure was fabricated on p-type silicon substrate using aqueous chemical growth (ACG) method. We have demonstrated the electro-optical performances of ZnO nano porous based hetero-junction diode using p-silicon. The current to voltage measurements (I-V) of ZnO-NPS/ p-Si hetero-junction were investigated in the temperature range 323 to 423 K. the ideality factor of the diode decrease from 10 to 3 as the temperature increasing from 323 to 423 K. Barrier height values of the structure vary between 0.5 and 0.7 eV as the temperature increases. The structural and optical properties of the ZnO-NPS nano structure was carried out using scanning electron microscope (SEM), photoluminescence (PL) spectra and Raman spectra. (author)

  12. Design of slotted high quality factor photonic-crystal nanocavities embedded in electro-optic polymers

    Science.gov (United States)

    Nakadai, Masahiro; Konoike, Ryotaro; Tanaka, Yoshinori; Asano, Takashi; Noda, Susumu

    2017-09-01

    We improve design quality factors of slotted photonic crystal nanocavities embedded in electro-optic polymers (EOPs), which enables control of resonant wavelengths without the use of light-absorbing free carriers. We form nanocavities by modifying single- and double-slotted line-defect waveguides with lattice-constant modulations analytically determined based on dispersions of the waveguides. A double-slotted nanocavity achieves a fourfold increase in Q factor (36 million) compared to a single-slotted nanocavity with similar modulation of lattice constants. Both structures can realize large concentration of light in the EOP region (50%), and resonant wavelength modulations of ∼0.01% are expected with applied voltage of 2 V.

  13. Characterization of coherent quantum frequency combs using electro-optic phase modulation

    Science.gov (United States)

    Imany, Poolad; Odele, Ogaga D.; Jaramillo-Villegas, Jose A.; Leaird, Daniel E.; Weiner, Andrew M.

    2018-01-01

    We demonstrate a two-photon interference experiment for phase coherent biphoton frequency combs (BFCs), created through spectral amplitude filtering of biphotons with a continuous broadband spectrum. By using an electro-optic phase modulator, we project the BFC lines into sidebands that overlap in frequency. The resulting high-visibility interference patterns provide an approach to verify frequency-bin entanglement even with slow single-photon detectors; we show interference patterns with visibilities that surpass the classical threshold for qubit and qutrit states. Additionally, we show that with entangled qutrits, two-photon interference occurs even with projections onto different final frequency states. Finally, we show the versatility of this scheme for weak-light measurements by performing a series of two-dimensional experiments at different signal-idler frequency offsets to measure the dispersion of a single-mode fiber.

  14. A 130 GHz Electro-Optic Ring Modulator with Double-Layer Graphene

    Directory of Open Access Journals (Sweden)

    Lei Wu

    2017-02-01

    Full Text Available The optical absorption coefficient of graphene will change after injecting carriers. Based on this principle, a high-speed double-layer graphene electro-optic modulator with a ring resonator structure was designed in this paper. From the numerical simulations, we designed a modulator. Its optical bandwidth is larger than 130 GHz, the switching energy is 0.358 fJ per bit, and the driven voltage is less than 1.2 V. At the same time, the footprint of the proposed modulator is less than 10 microns squared, which makes the process compatible with the Complementary Metal Oxide Semiconductors (CMOS process. This will provide the possibility for the on-chip integration of the photoelectric device.

  15. Fabrication of n-ZnO-NPs/p Si Heterojunction and Its Electro-optical Characterization

    International Nuclear Information System (INIS)

    Kashif, M.; Syed Mohd Usman Ali; Uda Hashim; Wilander, M.

    2011-01-01

    In the present study, n-ZnO-NPs nano structure was fabricated on p-type silicon substrate using aqueous chemical growth (Actg) method. We have demonstrated the electro-optical performances of ZnO nano porous based hetero-junction diode using p-silicon. The current to voltage measurements (I-V) of ZnO-NPS/p-Si hetero-junction were investigated in the temperature range 323 to 423 K. the ideality factor of the diode decrease from 10 to 3 as the temperature increasing from 323 to 423 K. Barrier height values of the structure vary between 0.5 and 0.7 eV as the temperature increases. The structural and optical properties of the ZnO-NPS nano structure was carried out using scanning electron microscope (SEM), photoluminescence (PL) spectra and Raman Spectra. (author)

  16. Demonstration of an optical phased array using electro-optic polymer phase shifters

    Science.gov (United States)

    Hirano, Yoshikuni; Motoyama, Yasushi; Tanaka, Katsu; Machida, Kenji; Yamada, Toshiki; Otomo, Akira; Kikuchi, Hiroshi

    2018-03-01

    We have been investigating an optical phased array (OPA) using electro-optic (EO) polymers in phase shifters to achieve ultrafast optical beam steering. In this paper, we describe the basic structures of the OPA using EO polymer phase shifters and show the beam steering capability of the OPA. The designed OPA has a multimode interference (MMI) beam splitter and 8-channel polymer waveguides with EO polymer phase shifters. We compare 1 × 8 MMI and cascaded 1 × 2 MMI beam splitters numerically and experimentally, and then obtain uniform intensity outputs from the 1 × 8 beam splitter. We fabricate the EO polymer OPA with a 1 × 8 MMI beam splitter to prevent intensity dispersion due to radiation loss in bending waveguides. We also evaluate the optical beam steering capability of the fabricated OPA and found a 2.7° deflection of far-field patterns when applying a voltage difference of 25 V in adjacent phase shifters.

  17. Electro-optic characterization of a nematic phase formed by bent core mesogens.

    Science.gov (United States)

    Tamba, M-G; Weissflog, W; Eremin, A; Heuer, J; Stannarius, R

    2007-01-01

    The purpose of this paper is the demonstration that bent core nematic phases behave quantitatively and qualitatively very different from ordinary calamitic nematics in their electro-optical characteristics. We present measurements of the elastic properties from the analysis of Brochard-Leger walls that are formed during the splay Fréedericksz transition in sandwich cells. These walls possess an unusually large shape anisotropy as compared to similar structures in calamitic nematics. The wall shapes can be explained when one assumes that the bend elastic constant K(33) is one order of magnitude larger than the twist constant K(22) of the material, supposing that flexoelectricity in the description of the elastic deformations can be neglected. Further we report periodic structures above the splay Fréedericksz transition with a wave vector perpendicular to the director easy axis. They represent either a static instability or an unconventional type of electrically driven convection.

  18. Analytic Study of Optical, Electro-optical and Magnetooptical Properties of Cabon Nanotubes

    DEFF Research Database (Denmark)

    Zarifi, Abbas

    studies and predictions that preceded the experimental observation of SWCNs. In this thesis, we have used a tight binding model with nearest neighbor interactions to investigate the electric dipole matrix elements and subsequently the linear susceptibility as a function of optical frequency for SWCNs. We...... have derived an analytic expression for the linear optical susceptibility of single wall zigzag CNs for light polarized parallel to the nanotube axis. For light polarized perpendicular to the nanotube axis, a closed-form expression for the electric dipole matrix element has been obtained. Hence......, numerical evaluation of the perpendicular susceptibility has been greatly simplified. By simplifying the long-axis linear susceptibility, analytic expression for the quadratic electro-optic effect in semiconducting zigzag CNs including the transitions between all pairs of valence and conduction bands has...

  19. Characterization of the electro-optical transceivers in the KM3NeT optical network

    Directory of Open Access Journals (Sweden)

    Pulvirenti S.

    2016-01-01

    Full Text Available KM3NeT is a future research infrastructure hosting a network of neutrino telescopes in the abyss of the Mediterranean Sea. The whole data transport over an optical network is based on the Dense Wavelength Division Multiplexing technique with optical channels spaced 50 GHz apart and a bit rate of 1.25 Gbps. Over the telescope lifetime, precise temperature control of the laser is required to maintain stability of the central frequency, complying with the recommendations of the International Telecommunication Union. We will report on the characterisation of the tuneable features of the electro-optical transceivers required to compensate for the expected wavelength drift due to aging factors. Preliminary results will be showed.

  20. Signal transmission in a human body medium-based body sensor network using a Mach-Zehnder electro-optical sensor.

    Science.gov (United States)

    Song, Yong; Hao, Qun; Zhang, Kai; Wang, Jingwen; Jin, Xuefeng; Sun, He

    2012-11-30

    The signal transmission technology based on the human body medium offers significant advantages in Body Sensor Networks (BSNs) used for healthcare and the other related fields. In previous works we have proposed a novel signal transmission method based on the human body medium using a Mach-Zehnder electro-optical (EO) sensor. In this paper, we present a signal transmission system based on the proposed method, which consists of a transmitter, a Mach-Zehnder EO sensor and a corresponding receiving circuit. Meanwhile, in order to verify the frequency response properties and determine the suitable parameters of the developed system, in-vivo measurements have been implemented under conditions of different carrier frequencies, baseband frequencies and signal transmission paths. Results indicate that the proposed system will help to achieve reliable and high speed signal transmission of BSN based on the human body medium.

  1. Feasibility study of a single-shot 3D electron bunch shape monitor with an electro-optic sampling technique

    Directory of Open Access Journals (Sweden)

    Yuichi Okayasu

    2013-05-01

    Full Text Available We developed a three-dimensional electron bunch charge distribution (3D-BCD monitor with single-shot detection, and a spectral decoding based electro-optic (EO sampling technique for a nondestructive monitor enables real-time reconstruction of the three-dimensional distribution of a bunch charge. We realized three goals by simultaneously probing a number of Pockels EO crystals that surround the electron beam axis with hollow and radial polarized laser pulses. First, we performed a feasibility test as a simple case of a 3D-BCD monitor probing two ZnTe crystals as EO detectors installed on the opposite angle to the electron beam axis and confirmed that we simultaneously obtained both EO signals. Since the adopted hollow probe laser pulse is not only radially polarized but also temporally shifted azimuthally, some disorders in the radial polarization distribution of such a laser pulse were numerically analyzed with a plane-wave expansion method. Based on the above investigations, the 3D-BCD monitor is feasible both in experimental and numerical estimations. Furthermore, we previously developed a femtosecond response organic crystal as a Pockels EO detector and a broadband probe laser (≥350  nm in FWHM; the 3D-BCD monitor realizes 30- to 40-fs (FWHM temporal resolution. Eventually, the monitor is expected to be equipped in such advanced accelerators as XFEL to measure and adjust the electron bunch charge distribution in real time. The 3D-BCD measurement works as a critical tool to provide feedback to seeded FELs.

  2. Electro-optic and magneto-dielectric properties of multifunctional nitride and oxide materials

    Science.gov (United States)

    Dixit, Ambesh

    Materials that simultaneously exhibit different physical properties provide a rich area of research leading to the development of new devices. For example, materials having a strong coupling between charge and spin degrees of freedom are essential to realizing a new class of devices referred to generally as spintronics. However, these multifunctional systems pose new scientific challenges in understanding the origin and mechanisms for cross-control of different functionalities. The core of this Ph.D. dissertation deals with multifunctional nitride and oxide compound semiconductors as well as multiferroic magnetic oxide systems by investigating structural, optical, electrical, magnetic, magnetodielectric and magnetoelectric properties. Thin films of InN nitride compound semiconductors and closely related alloys have been investigated to understand the effects of intrinsic defects on the materials properties while considering possible applications of highly degenerate InN thin films. As grown rf sputtered InN films on c-axis (0001) sapphire exhibit highly degenerate n-type behaviour due to oxygen defects introduced during growth. The effect of oxygen in InN matrix has been further investigated by intentionally adding oxygen into the films. These studies confirm that oxygen is one of the main sources of donor electrons in degenerate InN. Above some critical concentration of oxygen, secondary phases of In 2O3 and In-O-N complexes were formed. It was also possible to tune the carrier concentration to produce changes in the plasmon frequency, which varied from 0.45 eV to 0.8 eV. This characteristic energy scale suggests that these highly degenerate InN thin films could be used for thermophotovoltaic cells, optical filters, and other IR electro-optic applications. To probe the magnetism in transition metal doped InN system, In 0.98Cr0.02N and In0.95Cr0.05N thin films were fabricated. Our results suggest that these films develop ferromagnetic order above room temperature

  3. Modeling, Simulation, and Characterization of Electro-Optic Polymer Waveguide Devices.

    Science.gov (United States)

    Ma, Jiong

    The primary objective of this thesis is to investigate the properties of optical polymer waveguides and switches, develop a phenomenological CAD tool, and to use this phenomenological tool to design optical polymer devices for high-speed interconnects in VLSI systems. In the investigations of optical polymer waveguides, a new phenomenological bleaching model that is able to predict optical index profiles for photobleached polymer films was developed. The theoretical model shows good agreement with measured results for the effective index and optical field distributions of waveguides, and the absorption of films. Based on this bleaching model, we can predict the index profile for polymer channel waveguides and formulate design rules for active optical switches and modulators. The model has been successfully applied to photobleached PMMA/DR1 and Ultem/DEDR1 waveguides. An experimental technique to determine the poling -induced optical birefringence and optical nonlinearity is also discussed. In this technique, absorption measurements are performed immediately after poling. The poling-induced index changes as a function of wavelength are obtained from the absorption changes using a Kramers-Kronig transformation. An alternative method for predicting the poling-induced index changes, requiring a combination of waveguide measurement techniques and order parameter calculations, exhibits good agreement. By combining the poling effects with the photobleaching index profile, a CAD tool has been developed to calculate the optical field distribution and loss which allows the design of active electro-optical modulators. Using the CAD tool together with an equivalent circuit model of electro-optic polymer switches, circuit level comparisons of a CMOS strip line interconnect with an external polymer modulator interconnect were performed in terms of power dissipation, bandwidth, and connection density. HSPICE was used as a circuit simulation tool. Based on this analysis, it is

  4. Effect of a Polymercaptan Material on the Electro-Optical Properties of Polymer-Dispersed Liquid Crystal Films

    OpenAIRE

    Yujian Sun; Cuihong Zhang; Le Zhou; Hua Fang; Jianhua Huang; Haipeng Ma; Yi Zhang; Jie Yang; Lan-Ying Zhang; Ping Song; Yanzi Gao; Jiumei Xiao; Fasheng Li; Kexuan Li

    2016-01-01

    Polymer-dispersed liquid crystal (PDLC) films were prepared by the ultraviolet-light-induced polymerization of photopolymerizable monomers in nematic liquid crystal/chiral dopant/thiol-acrylate reaction monomer composites. The effects of the chiral dopant and crosslinking agents on the electro-optical properties of the PDLC films were systematically investigate. While added the chiral dopant S811 into the PDLC films, the initial off-state transmittance of the films was decreased. It was found...

  5. Noncontact electrical test of a ball grid array substrate that uses the electro-optic probing technique.

    Science.gov (United States)

    Kuo, Wen-Kai; Tang, Deng-Tzung; Wu, Chien-Jang; Lai, Thomson

    2005-07-10

    A new technique for testing a ball grid array (BGA) package substrate that uses the electro-optic (EO) probing technique is investigated. This technique can detect open circuits in the BGA substrate with a high spatial resolution. An experimental setup that uses an EO probe tip made of LiNbO3 crystal is reported along with the measurement results from a real BGA substrate.

  6. [Progress of electro-optic polymer in the field of generation and detection of Terahertz waves by all-optical technique].

    Science.gov (United States)

    Wang, Xuan; Jiang, Qiang; Wang, Yue; Zhang, Wen-long; Li, Zhi-yuan

    2014-08-01

    Research on and development of the high amplitude, broadband terahertz system based on ultra-short pulse, low-power laser system is a hot spot in the field of terahertz. So far, for all the reported THz bandwidths broader than 10 THz, there always exist strong dispersion and absorption gaps associated with the lattice resonance in either the photoconductive materials or crystalline EO materials. If such THz sources and detectors are employed in spectroscopic studies, spectral information in these gaps cannot be extracted. One of the advantages of using amorphous electro-optic polymer films as THz emitters and sensors is that there is no dispersion or absorption resulting from the lattice resonance effect, making a gap-free THz spectrum possible. Another advantage of electro-optic polymer films is the ease of fabrication and handling, in contrast to the extremely thin crystalline electro-optic materials used for existing broadband THz system. In addition, we can engineer the electro-optic polymeric materials to achieve small phase mismatch and high electro-optic coefficients such that brightness and broad bandwidth of THz radiation can be obtained. In this thesis a theoretical description of electro-optic effect based on electro-optic polymer and the second- order nonlinear chromophores synthesis is reviewed. In the past 20 years, progress in electro-optic polymer in the field of generating and detecting terahertz radiation by all-optical techniques is summarized, including the terahertzs systems based on copolymer and the guest-host polymer induced by Titanium doped sapphire femtosecond laser and based on the guest-host polymer at communication wavelengths.

  7. Electro-optical properties characterization of fish type III antifreeze protein.

    Science.gov (United States)

    Salvay, Andrés G; Santos, Javier; Howard, Eduardo I

    2007-12-01

    Antifreeze proteins (AFPs) are ice-binding proteins that depress the freezing point of water in a non-colligative manner without a significant modification of the melting point. Found in the blood and tissues of some organisms (such as fish, insects, plants, and soil bacteria), AFPs play an important role in subzero temperature survival. Fish Type III AFP is present in members of the subclass Zoarcoidei. AFPIII are small 7-kDa-or 14-kDa tandem-globular proteins. In the present work, we study the behavior of several physical properties, such as the low-frequency dielectric permittivity spectrum, circular dichroism, and electrical conductivity of Fish Type III AFP solutions measured at different concentrations. The combination of the information obtained from these measurements could be explained through the formation of AFP molecular aggregates or, alternatively, by the existence of some other type of interparticle interactions. Thermal stability and electro-optical behavior, when proteins are dissolved in deuterated water, were also investigated.

  8. Simulation and optimization of a polymer directional coupler electro-optic switch with push pull electrodes

    Science.gov (United States)

    Zheng, Chuan-Tao; Ma, Chun-Sheng; Yan, Xin; Wang, Xian-Yin; Zhang, Da-Ming

    2008-07-01

    Structural model and design technique are proposed for a polymer directional coupler electro-optic switch with rib waveguides and push-pull electrodes, of which the electric field distribution is analyzed by the conformal transforming method and image method. In order to get the minimum mode loss and the minimum switching voltage, the parameters of the waveguide and electrode are optimized, such as the core with, core thickness, buffer layer between the core and the electrode, coupling gap between the waveguides, electrode thickness, electrode width and electrode gap. Switching Characteristics are analyzed, which include the output power, insertion loss, and crosstalk. To realize normal switching function, the fabrication error, spectrum shift, and coupling loss between a single mode fiber (SMF) and the waveguide are discussed. Simulation results show that the coupling length is 3082 μm, push-pull switching voltage is 2.14 V, insertion loss is less than 1.17 dB, and crosstalk is less than -30 dB for the designed device.

  9. Rapid electro-optical (EO) TPS development in a military environment

    Science.gov (United States)

    McKechnie, James; Irwin, Alan; Gauntner, Thomas

    2012-06-01

    Santa Barbara Infrared, Inc. has deployed IRWindows as an Electro-Optical test development and execution environment for military Test Program Sets (TPS). Advantages of TPS development for EO systems in the IRWindows environment are seen compared to the TPS development in ATLAS. The advantages of the IRWindows environment are: 1. Faster learning curve (graphical user interface is easier than test line interface) 2. Faster TPS development time (real time changes and asset control interface allows for faster development) 3. Asset control panel allows user to control assets real time and monitor all asset functions during development 4. Unit Under Test (UUT) image viewer allows user to set test parameters like Region of Interest more easily and more precisely 5. Continuous mode tests (like MTF allows user to real time adjustments) 6. Open architecture for test modifications This paper will outline the details of how these advantages are utilized and how not only development time is decreased but also how test execution time can be minimized making traditionally long TPS run times on EO systems more efficient.

  10. Temporal profile monitor based on electro-optic spatial decoding for low-energy bunches

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2017-11-01

    Full Text Available The measurement of electron bunch temporal profile is one of the key diagnostics in accelerators, especially for ultrashort bunches. The electro-optic (EO technique enables the precise longitudinal characterization of bunch electric field in a single-shot and nondestructive way, which can simultaneously obtain and analyze the time jitter between the electron bunch and the synchronized laser. An EO monitor based on spatial decoding for temporal profile measurement and timing jitter recoding has recently been demonstrated and analyzed in depth for low-energy bunches at the Tsinghua Thomson scattering X-ray source. A detailed description of the experimental setup and measurement results are presented in this paper. An EO signal as short as 82 fs (rms is observed with 100  μm gallium phosphide for a 40 MeV electron bunch, and the corresponding length is 106 fs (rms with 300  μm zinc telluride. Owing to the field-opening angle, we propose a method to eliminate the influence of energy factor for bunches with low energy, resulting in a bunch length of ∼60  fs (rms. The monitor is also successfully applied to measure time jitter with approximately 10 fs accuracy. The experiment environment is proved to be the main source of the slow drift, which is removed using feedback control. Consequently, the rms time jitter decreases from 430 fs to 320 fs.

  11. Resonator-Based Silicon Electro-Optic Modulator with Low Power Consumption

    Science.gov (United States)

    Xin, Maoqing; Danner, Aaron J.; Eng Png, Ching; Thor Lim, Soon

    2009-04-01

    This paper demonstrates, via simulation, an electro-optic modulator based on a subwavelength Fabry-Perot resonator cavity with low power consumption of 86 µW/µm. This is, to the best of our knowledge, the lowest power reported for silicon photonic bandgap modulators. The device is modulated at a doped p-i-n junction overlapping the cavity in a silicon waveguide perforated with etched holes, with the doping area optimized for minimum power consumption. The surface area of the entire device is only 2.1 µm2, which compares favorably to other silicon-based modulators. A modulation speed of at least 300 MHz is detected from the electrical simulator after sidewall doping is introduced which is suitable for sensing or fiber to the home (FTTH) technologies, where speed can be traded for low cost and power consumption. The device does not rely on ultra-high Q, and could serve as a sensor, modulator, or passive filter with built-in calibration.

  12. Lidar and Electro-Optics for Atmospheric Hazard Sensing and Mitigation

    Science.gov (United States)

    Clark, Ivan O.

    2012-01-01

    This paper provides an overview of the research and development efforts of the Lidar and Electro-Optics element of NASA's Aviation Safety Program. This element is seeking to improve the understanding of the atmospheric environments encountered by aviation and to provide enhanced situation awareness for atmospheric hazards. The improved understanding of atmospheric conditions is specifically to develop sensor signatures for atmospheric hazards. The current emphasis is on kinetic air hazards such as turbulence, aircraft wake vortices, mountain rotors, and windshear. Additional efforts are underway to identify and quantify the hazards arising from multi-phase atmospheric conditions including liquid and solid hydrometeors and volcanic ash. When the multi-phase conditions act as obscurants that result in reduced visual awareness, the element seeks to mitigate the hazards associated with these diminished visual environments. The overall purpose of these efforts is to enable safety improvements for air transport class and business jet class aircraft as the transition to the Next Generation Air Transportation System occurs.

  13. Multi-Site Simultaneous Time-Resolved Photometry with a Low Cost Electro-Optics System

    Directory of Open Access Journals (Sweden)

    Forrest Gasdia

    2017-05-01

    Full Text Available Sunlight reflected off of resident space objects can be used as an optical signal for astrometric orbit determination and for deducing geometric information about the object. With the increasing population of small satellites and debris in low Earth orbit, photometry is a powerful tool in operational support of space missions, whether for anomaly resolution or object identification. To accurately determine size, shape, spin rate, status of deployables, or attitude information of an unresolved resident space object, multi-hertz sample rate photometry is required to capture the relatively rapid changes in brightness that these objects can exhibit. OSCOM, which stands for Optical tracking and Spectral characterization of CubeSats for Operational Missions, is a low cost and portable telescope system capable of time-resolved small satellite photometry, and is field deployable on short notice for simultaneous observation from multiple sites. We present the electro-optical design principles behind OSCOM and light curves of the 1.5 U DICE-2 CubeSat and simultaneous observations of the main body of the ASTRO-H satellite after its fragmentation event.

  14. Multi-Site Simultaneous Time-Resolved Photometry with a Low Cost Electro-Optics System.

    Science.gov (United States)

    Gasdia, Forrest; Barjatya, Aroh; Bilardi, Sergei

    2017-05-30

    Sunlight reflected off of resident space objects can be used as an optical signal for astrometric orbit determination and for deducing geometric information about the object. With the increasing population of small satellites and debris in low Earth orbit, photometry is a powerful tool in operational support of space missions, whether for anomaly resolution or object identification. To accurately determine size, shape, spin rate, status of deployables, or attitude information of an unresolved resident space object, multi-hertz sample rate photometry is required to capture the relatively rapid changes in brightness that these objects can exhibit. OSCOM, which stands for Optical tracking and Spectral characterization of CubeSats for Operational Missions, is a low cost and portable telescope system capable of time-resolved small satellite photometry, and is field deployable on short notice for simultaneous observation from multiple sites. We present the electro-optical design principles behind OSCOM and light curves of the 1.5 U DICE-2 CubeSat and simultaneous observations of the main body of the ASTRO-H satellite after its fragmentation event.

  15. Designing ultra-compact high efficiency electro-optical plasmonic switches by using of nanocavity reflectors

    Science.gov (United States)

    Shahamat, Yadollah; Vahedi, Mohammad

    2018-03-01

    An ultra-compact plasmonic electro-optical (EO) switch based on a silver-insulator-silver bus waveguide coupled to two nanocavity reflectors and two drop cavities is introduced. All cavities are filled with 4-dimethylamino- N-methyl-4-stilbazolium tosylate as an EO material. Finite difference time domain (FDTD) method and coupled-mode-theory (CMT) approaches are used to numerically and theoretically investigate the properties of the device. Results reveal that the proposed device can work properly as 1 × 1 and 1 × 2 switches. By inserting nanocavity reflectors, one can improve the performance of the switches. Results are shown for switches with single and double nanocavity reflectors operating at 984 nm and 1560 nm, respectively. A transmission of 0.83 (0.77) and modulation depth of 31.41 dB (17.72 dB) at the wavelength of 1560 nm (984 nm) could be obtained. The proposed device has potential nanophotonic applications due to simple geometry and compactness.

  16. Experiment of optical axis angle of electro-optic crystal by conoscopic interference and x-ray diffraction method

    Science.gov (United States)

    Li, Dong; Liu, Yong; Liu, Xu; Jiang, Hongzhen; Zheng, Fanglan

    2017-10-01

    Owing to the advantages of low loss, high spatial uniformity and high damage threshold, plasma electrode pockels cell (PEPC) is the key element of multi-pass amplifying technology in large laser facilities. Properties of PEPC is directly affected by the optical axis angle of the electro-optic crystal. Therefore, high precision measurement of the optical axis angle is indispensable. X-ray diffraction analysis method is a traditional way to determine the direction of optical axis of crystal, which is presented. By using conoscopic interference technique, a measurement system for optical axis angle of electro-optic crystal is introduced. The principle of conoscopic interference method is described in detail, and a series of techniques are implied in this measurement system to improve the accuracy. The optical axis angle two different electro-optic crystal is measured by X-ray diffraction analysis method and our conoscopic interference measurement system, respectively. The absolute error is less than 0.01mrad, while the relative error is nearly 2%.

  17. High-Speed Electro-Optic Modulator Integrated with Graphene-Boron Nitride Heterostructure and Photonic Crystal Nanocavity

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Yuanda; Shiue, Ren-Jye; Gan, Xuetao; Li, Luozhou; Peng, Cheng; Meric, Inanc; Wang, Lei; Szep, Attila; Walker, Dennis; Hone, James; Englund, Dirk

    2015-03-11

    Nanoscale and power-efficient electro-optic (EO) modulators are essential components for optical interconnects that are beginning to replace electrical wiring for intra- and interchip communications.1-4 Silicon-based EO modulators show sufficient figures of merits regarding device footprint, speed, power consumption, and modulation depth.5-11 However, the weak electro-optic effect of silicon still sets a technical bottleneck for these devices, motivating the development of modulators based on new materials. Graphene, a two-dimensional carbon allotrope, has emerged as an alternative active material for optoelectronic applications owing to its exceptional optical and electronic properties.12-14 Here, we demonstrate a high-speed graphene electro-optic modulator based on a graphene-boron nitride (BN) heterostructure integrated with a silicon photonic crystal nanocavity. Strongly enhanced light-matter interaction of graphene in a submicron cavity enables efficient electrical tuning of the cavity reflection. We observe a modulation depth of 3.2 dB and a cutoff frequency of 1.2 GHz.

  18. High-speed electro-optic modulator integrated with graphene-boron nitride heterostructure and photonic crystal nanocavity.

    Science.gov (United States)

    Gao, Yuanda; Shiue, Ren-Jye; Gan, Xuetao; Li, Luozhou; Peng, Cheng; Meric, Inanc; Wang, Lei; Szep, Attila; Walker, Dennis; Hone, James; Englund, Dirk

    2015-03-11

    Nanoscale and power-efficient electro-optic (EO) modulators are essential components for optical interconnects that are beginning to replace electrical wiring for intra- and interchip communications.1-4 Silicon-based EO modulators show sufficient figures of merits regarding device footprint, speed, power consumption, and modulation depth.5-11 However, the weak electro-optic effect of silicon still sets a technical bottleneck for these devices, motivating the development of modulators based on new materials. Graphene, a two-dimensional carbon allotrope, has emerged as an alternative active material for optoelectronic applications owing to its exceptional optical and electronic properties.12-14 Here, we demonstrate a high-speed graphene electro-optic modulator based on a graphene-boron nitride (BN) heterostructure integrated with a silicon photonic crystal nanocavity. Strongly enhanced light-matter interaction of graphene in a submicron cavity enables efficient electrical tuning of the cavity reflection. We observe a modulation depth of 3.2 dB and a cutoff frequency of 1.2 GHz.

  19. Structural, optical and electrical properties of WO3-Ag nanocomposites for the electro-optical devices

    Science.gov (United States)

    Najafi-Ashtiani, Hamed; Bahari, Ali; Gholipour, Samira; Hoseinzadeh, Siamak

    2018-01-01

    The composites of tungsten trioxide and silver are synthesized by sodium tungstate and silver nitrate precursors. The structural properties of composite coatings are studied by FTIR, XRD, and XPS. The FTIR analysis of synthesized composite powder corroborated the bonds between tungsten and oxygen elements in WO3 molecules. Furthermore, the XRD spectra show crystalline nature while particle size analysis that is investigated by X-powder software shows average particle size of 24 and 25 nm for samples. The structural analyses show that the addition of silver dopant does not change the stoichiometry of tungsten trioxide and only increase the size of the aggregation in the films. Furthermore, these films have an average approximate roughness of about 10.7, 13.1 and 14.2 nm for sample 1, 2 and 3, respectively. The real and imaginative parts of permittivity are investigated using LCR meter in the frequency range 1 Hz-10 GHz. The optical spectra of composite coatings are characterized in the 300-900 nm wavelength range and the calculation of optical band gaps of them exhibited the directly allowed transition with the values of 3.8 and 3.85 eV. From UV-visible spectroscopy studies, the absorption coefficient of the composite thin films is determined to be of the order of 105 cm- 1 and the obtained refraction and extinction indexes indicated normal dispersive coatings. Due to their optical and electrical properties, the synthesized composite material is a promising candidate for use in electro-optical applicants.

  20. High-Power, High-Speed Electro-Optic Pockels Cell Modulator

    Science.gov (United States)

    Hawthorne, Justin; Battle, Philip

    2013-01-01

    Electro-optic modulators rely on a change in the index of refraction for the optical wave as a function of an applied voltage. The corresponding change in index acts to delay the wavefront in the waveguide. The goal of this work was to develop a high-speed, high-power waveguide- based modulator (phase and amplitude) and investigate its use as a pulse slicer. The key innovation in this effort is the use of potassium titanyl phosphate (KTP) waveguides, making the highpower, polarization-based waveguide amplitude modulator possible. Furthermore, because it is fabricated in KTP, the waveguide component will withstand high optical power and have a significantly higher RF modulation figure of merit (FOM) relative to lithium niobate. KTP waveguides support high-power TE and TM modes - a necessary requirement for polarization-based modulation as with a Pockels cell. High-power fiber laser development has greatly outpaced fiber-based modulators in terms of its maturity and specifications. The demand for high-performance nonlinear optical (NLO) devices in terms of power handling, efficiency, bandwidth, and useful wavelength range has driven the development of bulk NLO options, which are limited in their bandwidth, as well as waveguide based LN modulators, which are limited by their low optical damage threshold. Today, commercially available lithium niobate (LN) modulators are used for laser formatting; however, because of photorefractive damage that can reduce transmission and increase requirements on bias control, LN modulators cannot be used with powers over several mW, dependent on wavelength. The high-power, high-speed modulators proposed for development under this effort will enable advancements in several exciting fields including lidarbased remote sensing, atomic interferometry, free-space laser communications, and others.

  1. Fast Interrogation of Fiber Bragg Gratings with Electro-Optical Dual Optical Frequency Combs

    Directory of Open Access Journals (Sweden)

    Julio E. Posada-Roman

    2016-11-01

    Full Text Available Optical frequency combs (OFC generated by electro-optic modulation of continuous-wave lasers provide broadband coherent sources with high power per line and independent control of line spacing and the number of lines. In addition to their application in spectroscopy, they offer flexible and optimized sources for the interrogation of other sensors based on wavelength change or wavelength filtering, such as fiber Bragg grating (FBG sensors. In this paper, a dual-OFC FBG interrogation system based on a single laser and two optical-phase modulators is presented. This architecture allows for the configuration of multimode optical source parameters such as the number of modes and their position within the reflected spectrum of the FBG. A direct read-out is obtained by mapping the optical spectrum onto the radio-frequency spectrum output of the dual-comb. This interrogation scheme is proposed for measuring fast phenomena such as vibrations and ultrasounds. Results are presented for dual-comb operation under optimized control. The optical modes are mapped onto detectable tones that are multiples of 0.5 MHz around a center radiofrequency tone (40 MHz. Measurements of ultrasounds (40 kHz and 120 kHz are demonstrated with this sensing system. Ultrasounds induce dynamic strain onto the fiber, which generates changes in the reflected Bragg wavelength and, hence, modulates the amplitude of the OFC modes within the reflected spectrum. The amplitude modulation of two counterphase tones is detected to obtain a differential measurement proportional to the ultrasound signal.

  2. Dataset on electro-optically tunable smart-supercapacitors based on oxygen-excess nanograin tungsten oxide thin film

    Directory of Open Access Journals (Sweden)

    Akbar I. Inamdar

    2017-10-01

    Full Text Available The dataset presented here is related to the research article entitled “Highly Efficient Electro-optically Tunable Smart-supercapacitors Using an Oxygen-excess Nanograin Tungsten Oxide Thin Film” (Akbar et al., 2017 [9] where we have presented a nanograin WO3 film as a bifunctional electrode for smart supercapacitor devices. In this article we provide additional information concerning nanograin tungsten oxide thin films such as atomic force microscopy, Raman spectroscopy, and X-ray diffraction spectroscopy. Moreover, their electrochemical properties such as cyclic voltammetry, electrochemical supercapacitor properties, and electrochromic properties including coloration efficiency, optical modulation and electrochemical impedance spectroscopy are presented.

  3. Electro-optical determination of the constant electric dipole of disperse particles by the method of crossed electric fields

    Energy Technology Data Exchange (ETDEWEB)

    Voitylov, V.V.; Spartakov, A.A.; Tolstoi, N.A.; Trusov, A.A.; Boitsova, I.N. [St. Petersburg State Univ. (Russian Federation)

    1995-04-01

    An electro-optical method of crossed electric fields is proposed for determining constant dipole colloidal particles moments of colloidal particles. Fields of this type make it possible to study the motion of colloidal particles determined exclusively by their constant moments, which substantially improves the measurement accuracy of these moments. This is of particular importance for the investigation of colloidal particles with constant dipole moments less than or comparable to induced dipole moments. For a number of disperse systems, the constant dipole moments per unit area of particles are determined. It is shown that the values of these specific moments are close to each other.

  4. The features of electro-optical memory effect for 1.54 mum electroluminescence of an Er doped Si diode

    Energy Technology Data Exchange (ETDEWEB)

    Andreev, B.A.; Krasilnik, Z.F. [Institute for Physics of Microstructures, RAS, GSP-105, Nizhny Novgorod 603950 (Russian Federation); Kryzhkov, D.I., E-mail: krizh@ipm.sci-nnov.r [Institute for Physics of Microstructures, RAS, GSP-105, Nizhny Novgorod 603950 (Russian Federation); Kudryavtsev, K.E.; Kuznetsov, V.P. [Institute for Physics of Microstructures, RAS, GSP-105, Nizhny Novgorod 603950 (Russian Federation)

    2009-12-15

    The features of electro-optical memory effect ('stored' electroluminescence) for 1.54 mum electroluminescence of an Er-doped Si diode have been investigated. It is shown, that excitation mechanism for the stored electroluminescence is impact excitation of Er{sup 3+} ions by the electrons, released from deep traps. High excitation efficiency for stored electroluminescence has been demonstrated (500 times higher compared to forward bias electroluminescence). Optical excitation of 'stored' electroluminescence has been demonstrated with band-to-band illumination instead of forward bias injection pulse.

  5. Electro-optic analysis of the influence of target geometry on electromagnetic pulses generated by petawatt laser-matter interactions

    Directory of Open Access Journals (Sweden)

    Robinson Timothy

    2018-01-01

    Full Text Available We present an analysis of strong laser-driven electromagnetic pulses using novel electro-optic diagnostic techniques. A range of targets were considered, including thin plastic foils (20-550 nm and mass-limited, optically-levitated micro-targets. Results from foils indicate a dependence of EMP on target thickness, with larger peak electric fields observed with thinner targets. Spectral analysis suggests high repeatability between shots, with identified spectral features consistently detected with 30 MeV energies, suggesting the discharge current contribution to EMP is dominant.

  6. Progress in Nano-Electro-Optics VI Nano-Optical Probing, Manipulation, Analysis, and Their Theoretical Bases

    CERN Document Server

    Ohtsu, Motoichi

    2008-01-01

    This volume focuses on nano-optical probing, manipulation, and analysis. It begins with recent developments in near-field optical spectroscopy that clarify quantum states at the nanoscale, followed by a theory for a photon-electron-phonon interacting system at the nanoscale. Further topics include: visible laser desorption/ionization mass spectroscopy exhibiting near-field effects; a practical nanofabrication method with optical near fields applied to a SHG device; a theory and experimental achievements on optical transport of nanoparticles, selectively manipulated by resonant radiation force. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  7. Progress in Nano-Electro-Optics VII Chemical, Biological, and Nanophotonic Technologies for Nano-Optical Devices and Systems

    CERN Document Server

    Ohtsu, Motoichi

    2010-01-01

    This book focuses on chemical and nanophotonic technology to be used to develop novel nano-optical devices and systems. It begins with temperature- and photo-induced phase transition of ferromagnetic materials. Further topics include: energy transfer in artificial photosynthesis, homoepitaxial multiple quantum wells in ZnO, near-field photochemical etching and nanophotonic devices based on a nonadiabatic process and optical near-field energy transfer, respectively and polarization control in the optical near-field for optical information security. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  8. Electro-optical and Magneto-optical Sensing Apparatus and Method for Characterizing Free-space Electromagnetic Radiation

    Science.gov (United States)

    Zhang, Xi-Cheng; Riordan, Jenifer Ann; Sun, Feng-Guo

    2000-08-29

    Apparatus and methods for characterizing free-space electromagnetic energy, and in particular, apparatus/method suitable for real-time two-dimensional far-infrared imaging applications are presented. The sensing technique is based on a non-linear coupling between a low-frequency electric (or magnetic) field and a laser beam in an electro-optic (or magnetic-optic) crystal. In addition to a practical counter-propagating sensing technique, a co-linear approach is described which provides longer radiated field-optical beam interaction length, thereby making imaging applications practical.

  9. Electro-optical properties of dislocations in silicon and their possible application for light emitters

    Energy Technology Data Exchange (ETDEWEB)

    Arguirov, Tzanimir Vladimirov

    2007-10-14

    This thesis addresses the electro-optical properties of silicon, containing dislocations. The work demonstrates that dislocation specific radiation may provide a means for optical diagnostics of solar cell grade silicon. It provides insight into the mechanisms governing the dislocation recombination activity, their radiation, and how are they influenced by other defects present in silicon. We demonstrate that photoluminescence mapping is useful for monitoring the recombination activity in solar cell grade silicon and can be applied for identification of contaminants, based on their photoluminescence signatures. It is shown that the recombination at dislocations is strongly influenced by the presence of metals at the dislocation sites. The dislocation radiation activity correlates with their electrical activity. It is shown that the dislocation and band-to-band luminescence are essentially anti-correlated. {beta}FeSi{sub 2} precipitates, with a luminescence at 0.8 eV, were detected within the grains of block cast materials. They exhibit a characteristic feature of quantum dots, namely blinking. The second aspect of the thesis concerns the topic of silicon based light emitters for on-chip optical interconnects. The goal is an enhancement of sub-band-gap or band-to-band radiation by controlled formation of dislocation-rich areas in microelectronics-grade silicon as well as understanding of the processes governing such enhancement. For light emitters based on band-to-band emission it is shown, that internal quantum efficiency of nearly 2 % can be achieved, but the emission is essentially generated in the bulk of the wafer. On the other hand, light emitters utilizing the emission from dislocation-rich areas of a well localized wafer depth were explored. Three different methods for reproducible formation of a dislocation-rich region beneath the wafer surface were investigated and evaluated in view of their room temperature sub-band-gap radiation: (1) silicon implantation

  10. Lidar Technology at the Goddard Laser and Electro-Optics Branch

    Science.gov (United States)

    Heaps, William S.; Obenschain, Arthur F. (Technical Monitor)

    2000-01-01

    The Laser and Electro-Optics Branch at Goddard Space flight Center was established about three years ago to provide a focused center of engineering support and technology development in these disciplines with an emphasis on spaced based instruments for Earth and Space Science. The Branch has approximately 15 engineers and technicians with backgrounds in physics, optics, and electrical engineering. Members of the Branch are currently supporting a number of space based lidar efforts as well as several technology efforts aimed at enabling future missions. The largest effort within the Branch is support of the Ice, Cloud, and land Elevation Satellite (ICESAT) carrying the Geoscience Laser Altimeter System (GLAS) instrument. The ICESAT/GLAS primary science objectives are: 1) To determine the mass balance of the polar ice sheets and their contributions to global sea level change; and 2) To obtain essential data for prediction of future changes in ice volume and sea-level. The secondary science objectives are: 1) To measure cloud heights and the vertical structure of clouds and aerosols in the atmosphere; 2) To map the topography of land surfaces; and 3) To measure roughness, reflectivity, vegetation heights, snow-cover, and sea-ice surface characteristics. Our efforts have concentrated on the GLAS receiver component development, the Laser Reference Sensor for the Stellar Reference System, the GLAS fiber optics subsystems, and the prelaunch calibration facilities. We will report on our efforts in the development of the space qualified interference filter [Allan], etalon filter, photon counting detectors, etalor/laser tracking system, and instrument fiber optics, as well as specification and selection of the star tracker and development of the calibration test bed. We are also engaged in development work on lidar sounders for chemical species. We are developing new lidar technology to enable a new class of miniature lidar instruments that are compatible with small

  11. Electro-optic response of metal halide : A first-principles study

    Indian Academy of Sciences (India)

    Amreen Bano

    2017-07-08

    Jul 8, 2017 ... A theoretical study of electronic and optical properties of metal-halide cubic perovskite, CsPbI3, ... In the case of conductors, the ... To the best of our knowledge, no attempts have been made to study the optical properties of cubic CsPbI3. In this paper, we assess the properties of halide perovskite CsPbI3 ...

  12. High-speed electro-optic switch based on nonlinear polymer-clad waveguide incorporated with quasi-in-plane coplanar waveguide electrodes

    Science.gov (United States)

    Jiang, Ming-Hui; Wang, Xi-Bin; Xu, Qiang; Li, Ming; Niu, Dong-Hai; Sun, Xiao-Qiang; Wang, Fei; Li, Zhi-Yong; Zhang, Da-Ming

    2018-01-01

    Nonlinear optical (NLO) polymer is a promising material for active waveguide devices that can provide large bandwidth and high-speed response time. However, the performance of the active devices is not only related to the waveguide materials, but also related to the waveguide and electrode structures. In this paper, a high-speed Mach-Zehnder interferometer (MZI) type of electro-optic (EO) switch based on NLO polymer-clad waveguide was fabricated. The quasi-in-plane coplanar waveguide electrodes were also introduced to enhance the poling and modulating efficiency. The characteristic parameters of the waveguide and electrode were carefully designed and simulated. The switches were fabricated by the conventional micro-fabrication process. Under 1550-nm operating wavelength, a typical fabricated switch showed a low insertion loss of 10.2 dB, and the switching rise time and fall time were 55.58 and 57.98 ns, respectively. The proposed waveguide and electrode structures could be developed into other active EO devices and also used as the component in the polymer-based large-scale photonic integrated circuit.

  13. Effect of a Polymercaptan Material on the Electro-Optical Properties of Polymer-Dispersed Liquid Crystal Films

    Directory of Open Access Journals (Sweden)

    Yujian Sun

    2016-12-01

    Full Text Available Polymer-dispersed liquid crystal (PDLC films were prepared by the ultraviolet-light-induced polymerization of photopolymerizable monomers in nematic liquid crystal/chiral dopant/thiol-acrylate reaction monomer composites. The effects of the chiral dopant and crosslinking agents on the electro-optical properties of the PDLC films were systematically investigate. While added the chiral dopant S811 into the PDLC films, the initial off-state transmittance of the films was decreased. It was found that the weight ratio among acrylate monomers, thiol monomer PETMP and the polymercaptan Capcure 3-800 showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol-acrylate reaction and acrylate monomer polymerization reaction. While adding polymercaptans curing agent Capcure 3-800 with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers.

  14. Effect of a Polymercaptan Material on the Electro-Optical Properties of Polymer-Dispersed Liquid Crystal Films.

    Science.gov (United States)

    Sun, Yujian; Zhang, Cuihong; Zhou, Le; Fang, Hua; Huang, Jianhua; Ma, Haipeng; Zhang, Yi; Yang, Jie; Zhang, Lan-Ying; Song, Ping; Gao, Yanzi; Xiao, Jiumei; Li, Fasheng; Li, Kexuan

    2016-12-30

    Polymer-dispersed liquid crystal (PDLC) films were prepared by the ultraviolet-light-induced polymerization of photopolymerizable monomers in nematic liquid crystal/chiral dopant/thiol-acrylate reaction monomer composites. The effects of the chiral dopant and crosslinking agents on the electro-optical properties of the PDLC films were systematically investigate. While added the chiral dopant S811 into the PDLC films, the initial off-state transmittance of the films was decreased. It was found that the weight ratio among acrylate monomers, thiol monomer PETMP and the polymercaptan Capcure 3-800 showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol-acrylate reaction and acrylate monomer polymerization reaction. While adding polymercaptans curing agent Capcure 3-800 with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers.

  15. Characterization and control of the electro-optic phase dispersion in lithium niobate modulators for wide spectral band interferometry applications in the mid-infrared.

    Science.gov (United States)

    Heidmann, S; Ulliac, G; Courjal, N; Martin, G

    2017-05-10

    Mid-infrared wideband modulation (3.2-3.7 μm) is achieved in an electro-optic Y-junction using lithium niobate waveguides in TE polarized light. Comparison between external (scanning mirror) and internal (electro-optical) modulation allows studying the chromatic polynomial dependence of the relative phase. Internal modulation consists on a V AC ramp up to 370 V at 0.25 Hz, applied over 14 mm long electrodes with 14 μm separation. The overall V π L π obtained is 17.5 V·cm, meaning that using a 300 V generator we can actively scan and track the whole L-band (3.4-4.1 μm) wideband fringes. We observe a dramatic reduction of the coherence length under electro-optic modulation, which is attributed to a strong nonlinear dependence of the electro-optic effect on the wavelength upon application of such high voltages. We study the effect of applying a V DC offset, from -50  V to 200 V (50 V step). We characterize this dispersion and propose an improved dispersion model that is used to show active dispersion compensation in wideband fringe modulation in the mid-infrared. This can be useful for long baseline interferometry or pulse compression applications when light propagates along fibers, in order to compensate for chromatic effects that induce differential dispersion or pulse spreading, respectively.

  16. Intense transient electric field sensor based on the electro-optic effect of LiNbO3

    Directory of Open Access Journals (Sweden)

    Qing Yang

    2015-10-01

    Full Text Available Intense transient electric field measurements are widely applied in various research areas. An optical intense E-field sensor for time-domain measurements, based on the electro-optic effect of lithium niobate, has been studied in detail. Principles and key issues in the design of the sensor are presented. The sensor is insulated, small in size (65 mm × 15 mm × 15 mm, and suitable for high-intensity (<801 kV/m electric field measurements over a wide frequency band (10 Hz–10 MHz. The input/output characteristics of the sensor were obtained and the sensor calibrated. Finally, an application using this sensor in testing laboratory lightning impulses and in measuring transient electric fields during switch-on of a disconnector confirmed that the sensor is expected to find widespread use in transient intense electric field measurement applications.

  17. Progress in nano-electro optics characterization of nano-optical materials and optical near-field interactions

    CERN Document Server

    Ohtsu, Motoichi

    2005-01-01

    This volume focuses on the characterization of nano-optical materials and optical-near field interactions. It begins with the techniques for characterizing the magneto-optical Kerr effect and continues with methods to determine structural and optical properties in high-quality quantum wires with high spatial uniformity. Further topics include: near-field luminescence mapping in InGaN/GaN single quantum well structures in order to interpret the recombination mechanism in InGaN-based nano-structures; and theoretical treatment of the optical near field and optical near-field interactions, providing the basis for investigating the signal transport and associated dissipation in nano-optical devices. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  18. Electro-optic analysis of the influence of target geometry on electromagnetic pulses generated by petawatt laser-matter interactions

    Science.gov (United States)

    Robinson, Timothy; Giltrap, Samuel; Eardley, Samuel; Consoli, Fabrizio; De Angelis, Riccardo; Ingenito, Francesco; Stuart, Nicholas; Verona, Claudio; Smith, Roland A.

    2018-01-01

    We present an analysis of strong laser-driven electromagnetic pulses using novel electro-optic diagnostic techniques. A range of targets were considered, including thin plastic foils (20-550 nm) and mass-limited, optically-levitated micro-targets. Results from foils indicate a dependence of EMP on target thickness, with larger peak electric fields observed with thinner targets. Spectral analysis suggests high repeatability between shots, with identified spectral features consistently detected with earth following ejection of hot electrons from the plasma, in contrast to predictions for pin-mounted foils in the Poyé EMP generation model. With levitated targets, no EMP was measurable above the noise threshold of any diagnostic, despite observation of protons accelerated to >30 MeV energies, suggesting the discharge current contribution to EMP is dominant.

  19. Integrated X-ray testing of the electro-optical breadboard model for the XMM reflection grating spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Bixler, J.V.; Craig, W.; Decker, T. [Lawrence Livermore National Lab., CA (United States); Aarts, H.; Boggende, T. den; Brinkman, A.C. [Space Research Organization Netherlands, Utrecht (Netherlands); Burkert, W.; Brauninger, H. [Max-Planck Institute fur Extraterrestische Physik, Testanlage (Germany); Branduardi-Raymont, G. [Univ. College London (United Kingdom); Dubbeldam, L. [Space Research Organization Netherlands, Leiden (Netherlands)] [and others

    1994-07-12

    X-ray calibration of the Electro-Optical Breadboard Model (EOBB) of the XXM Reflection Grating Spectrometer has been carried out at the Panter test facility in Germany. The EOBB prototype optics consisted of a four-shell grazing incidence mirror module followed by an array of eight reflection gratings. The dispersed x-rays were detected by an array of three CCDs. Line profile and efficiency measurements where made at several energies, orders, and geometric configurations for individual gratings and for the grating array as a whole. The x-ray measurements verified that the grating mounting method would meet the stringent tolerances necessary for the flight instrument. Post EOBB metrology of the individual gratings and their mountings confirmed the precision of the grating boxes fabrication. Examination of the individual grating surface`s at micron resolution revealed the cause of anomalously wide line profiles to be scattering due to the crazing of the replica`s surface.

  20. Electro-optic detection of subwavelength terahertz spot sizes in the near field of a metal tip

    Science.gov (United States)

    van der Valk, N. C. J.; Planken, P. C. M.

    2002-08-01

    We report on a method to obtain a subwavelength resolution in terahertz time-domain imaging. In our method, a sharp copper tip is used to locally distort and concentrate the THz electric field. The distorted electric field, present mainly in the near field of the tip, is electro-optically measured in an (100) oriented GaP crystal. By raster scanning the tip along the surface of the crystal, we find the smallest THz spot size of 18 μm for frequencies from 0.1 to 2.5 THz. For our peak frequency of 0.15 THz, this corresponds to a resolution of λ/110. Our setup has the potential to reach a resolution down to a few μm.

  1. Implementation of wavelength selector based on electro-optic effect in Mach-Zehnder interferometers for high speed communications

    Science.gov (United States)

    Kumar, Santosh; Bisht, Ashish; Singh, Gurdeep; Choudhary, Kuldeep; Sharma, Divya

    2015-09-01

    The design of 4×1 and 8×1 wavelength selectors have been presented with complete functionality and configuration, which can be used as DWDM components in optical networks. The proposed optical logic unit is based on electro-optic effect in Mach-Zehnder interferometer (MZI). The Mach-Zehnder interferometer (MZI) structures collectively show the powerful capability in switching an input optical signal to a desired output port from a collection of output ports. A strategy for optical wavelength switching has been shown by constructing a design of wavelength selector using MZIs. The paper constitutes the mathematical description of proposed device and thereafter the wavelength switching behavior is analyzed using beam propagation method (BPM). The results are also verified with the help of MATLAB simulations and truth table.

  2. Electro-optic modulation of light propagating near the optic axis with any polarization in uniaxial crystals

    Science.gov (United States)

    Song, Zhe; Liu, Liren; Zhou, Yu; Liu, De'an; Ren, Haixia

    2006-09-01

    The electro-optic effect in uniaxial crystals for light propagating near the optic axis with any polarization has been analyzed. The passive and the electrically induced birefringences and the rotation of polarization direction in crystals have been calculated, and the conoscopic interference figures under orthogonal polariscopes for different polarizer directions have been plotted. The extinction areas caused by the rotation of polarization direction in crystals change with the polarizer direction, but the two heads of the induced optical axes do not vary, which are always on the induced principal axis with bigger refractive index. The directions of polariscopes are always extinction, and the +/-45[degree sign] directions with polarizer are always complete transmission. The conoscopic interference figures for LiNbO3 crystals have been demonstrated experimentally by rotating polariscopes directions, which accord with the theoretically calculating plots.

  3. Analysis of an electro-optic modulator based on a graphene-silicon hybrid 1D photonic crystal nanobeam cavity.

    Science.gov (United States)

    Pan, Ting; Qiu, Ciyuan; Wu, Jiayang; Jiang, Xinhong; Liu, Boyu; Yang, Yuxing; Zhou, Huanying; Soref, Richard; Su, Yikai

    2015-09-07

    We propose and numerically study an on-chip graphene-silicon hybrid electro-optic (EO) modulator operating at the telecommunication band, which is implemented by a compact 1D photonic crystal nanobeam (PCN) cavity coupled to a bus waveguide with a graphene sheet on top. Through electrically tuning the Fermi level of the graphene, both the quality factor and the resonance wavelength can be significantly changed, thus the in-plane lightwave can be efficiently modulated. Based on finite-difference time-domain (FDTD) simulation results, the proposed modulator can provide a large free spectral range (FSR) of 125.6 nm, a high modulation speed of 133 GHz, and a large modulation depth of ~12.5 dB in a small modal volume, promising a high performance EO modulator for wavelength-division multiplexed (WDM) optical communication systems.

  4. Electro-Optical Detection of Coherent Radiation Induced by Relativistic Electron Bunches in the Near and Far Fields

    Science.gov (United States)

    Curcio, A.; Anania, M.; Bisesto, F.; Botton, M.; Castellano, M.; Chiadroni, E.; Cianchi, A.; Ferrario, M.; Galletti, M.; Giulietti, D.; Henis, Z.; Petrarca, M.; Pompili, R.; Schleifer, E.; Zigler, A.

    2018-02-01

    Coherent radiation produced by relativistic charged bunches is nowadays of great interest for user-oriented applications and high-resolution diagnostics. Here we present experimental results obtained by using a temporal monitor based on the electro-optical sampling that allows us to reveal the features of the radiation emitted in terahertz range by ultrashort electron bunches moving in proximity to a nonlinear crystal. We investigate the radiation properties both in near- and far-field conditions by employing electron beams accelerated by a conventional photoinjector and through laser-plasma interactions. Our results indicate that the emitted radiation moves collinearly with the beam in one case, while its properties resemble those of the classical Cherenkov radiation in a second case.

  5. Integrating undergraduate research into the electro-optics and laser engineering technology program at Indiana University of Pennsylvania

    Science.gov (United States)

    Zhou, Andrew F.

    2014-07-01

    Bringing research into an undergraduate curriculum is a proven and powerful practice with many educational benefits to students and the professional rewards to faculty mentors. In recent years, undergraduate research has gained national prominence as an effective problem-based learning strategy. Developing and sustaining a vibrant undergraduate research program of high quality and productivity is an outstanding example of the problem-based learning. To foster student understanding of the content learned in the classroom and nurture enduring problem-solving and critical-thinking abilities, we have created a collaborative learning environment by building research into the Electro-Optics curriculum for the first- and second-year students. The teaching methodology is described and examples of the research projects are given. Such a research-integrated curriculum effectively enhances student learning and critical thinking skills, and strengthens the research culture for the first- and second-year students.

  6. Duty cycle dependence of a periodically poled LiNbO3-based electro-optic Solc filter.

    Science.gov (United States)

    Rabia, Eyal; Arie, Ady

    2006-01-20

    We demonstrate that the performance of a periodically poled LiNbO3- (PPLN-) based electro-optic Solc filter is dependent on the duty cycle of the crystal. This may limit the performance of the device for applications such as add-drop filtering and switching, owing to the deterioration of the extinction ratio. It is shown that by adding a retarder to the Solc filter it is possible to improve the extinction ratio; thus the dependence of the filter on the duty cycle can be reduced. Using Jones calculus, we analyzed the effect of a variable retarder that can also be rotated on the extinction ratio. We experimentally observed a 6 dB increase in the extinction ratio when we used a half-wavelength retarder.

  7. Structural characteristics of a single-crystalline Sr0.75Ba0.25NbO3 electro-optic material

    International Nuclear Information System (INIS)

    Qadri, Syed B.; Garzarella, Anthony; Wieting, Terrence; Wu, Dong Ho; Mahadik, Nadeemullah A.

    2009-01-01

    Sr 0.75 Ba 0.25 NbO 3 (SBN-75) has the tungsten-bronze structure with a tetragonal unit cell and exhibits electro-optic properties that are important for sensors. Due to its quaternary nature, its structural uniformity, integrity, and homogeneity become important for these applications. In this paper, we present high-resolution X-ray diffraction studies of the crystalline quality and lattice parameter variation across the surface of single crystals of SBN-75. Using rocking curves, topographs, and point-wise measurements of lattice parameters, we show that these crystals have a high degree of crystalline quality and microscopic homogeneity for any electro-optic application. (orig.)

  8. Dielectric and electro-optic studies of a bimesogenic liquid crystal composed of bent-core and calamitic units.

    Science.gov (United States)

    Balachandran, R; Panov, V P; Vij, J K; Shanker, G; Tschierske, C; Merkel, K; Kocot, A

    2014-09-01

    A bimesogen, BR1, composed of a bent-core and calamitic unit, linked laterally via a flexible spacer is investigated by dielectric and electro-optic techniques. X-ray results show the presence of clusters in the nematic phase, and the cluster size is of the order of the thickness of a single layer. The splitting of the small-angle scattering Δχ/2 is about 50°, which indicates SmC like clusters with a significant tilt of the molecules in the quasilayers. The sign reversal of the dielectric anisotropy Δε' is observed as a function of frequency; the behavior is rather similar to that exhibited by the conventional dual frequency nematics, composed of a calamitic mesogen, with the exception that it occurs at much lower frequencies in this material. Interestingly, as the bimesogen enters its nematic phase, the average permittivity decreases as the temperature is lowered. This indicates the onset of antiparallel association of some of the dipoles in the system, and this type of association is much more prominent in BR1 in comparison to other bent-core liquid crystalline systems composed of the same bisbenzoate core unit. The analysis of the dielectric spectra using the Maier-Meier model confirms the onset of an antiparallel correlation of dipoles occurring at the isotropic to nematic phase transition temperature. Additionally these results support a model of the cluster where the transverse dipole moments in the neighboring layers are antiparalleled to each other.

  9. Contribution of electro-optics to plasma research; Apport de l'electro-optique aux etudes sur le plasma

    Energy Technology Data Exchange (ETDEWEB)

    Dillet, A.; Jacquot, C.; Stevenin, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    Two electro-optical devices useful for plasma diagnostic are described. The first includes two image converters and is able to record any luminous transient phenomenon (for instance, fast spectrography) with a photon gain sufficient to distinguish the physically observable luminous thresholds. The second makes use of the Faraday effect to measure magnetic fields without perturbation. A fast device has a pass band up to 30 MHz. A slower one can detect the '' of arc. (authors) [French] On decrit deux appareils electro-optiques utilises pour le diagnostic sur les plasmas. Le premier comprend une association de deux amplificateurs de luminance capable d'enregistrer tout phenomene lumineux transitoire (par exemple, spectrographie rapide) avec un gain de photons suffisant pour discerner les seuils de lumiere physiquement observables. Le deuxieme utilise l'effet Faraday pour des mesures non perturbatrices de champ magnetique. Un dispositif rapide a une bande passante allant jusqu'a 30 MHz. Un dispositif plus lent peut detecter l'' d'arc. (auteurs)

  10. Low-loss, silicon integrated, aluminum nitride photonic circuits and their use for electro-optic signal processing.

    Science.gov (United States)

    Xiong, Chi; Pernice, Wolfram H P; Tang, Hong X

    2012-07-11

    Photonic miniaturization requires seamless integration of linear and nonlinear optical components to achieve passive and active functions simultaneously. Among the available material systems, silicon photonics holds immense promise for optical signal processing and on-chip optical networks. However, silicon is limited to wavelengths above 1.1 μm and does not provide the desired lowest order optical nonlinearity for active signal processing. Here we report the integration of aluminum nitride (AlN) films on silicon substrates to bring active functionalities to chip-scale photonics. Using CMOS-compatible sputtered thin films we fabricate AlN-on-insulator waveguides that exhibit low propagation loss (0.6 dB/cm). Exploiting AlN's inherent Pockels effect we demonstrate electro-optic modulation up to 4.5 Gb/s with very low energy consumption (down to 10 fJ/bit). The ultrawide transparency window of AlN devices also enables high speed modulation at visible wavelengths. Our low cost, wideband, carrier-free photonic circuits hold promise for ultralow power and high-speed signal processing at the microprocessor chip level.

  11. Target recognition: fusing long-wave infrared and electro-optical imagery for detection of humans in a scene

    Science.gov (United States)

    Woodyard, R. L.; Skipper, J. A.; Repperger, D. W.

    2009-05-01

    We aim to identify humans in multimodal imagery by predicting the human long-wave infrared (LWIR) signature in a variety of scenarios. By adapting Tanabe's thermocomfort model, we simulate human body heat flow both between tissue layers (core, muscle, fat and skin) and between body segments (head, chest, upper arm, etc.). To assess the validity of our implementation, we simulated the conditions described in actual human subject studies, and compared our results to values reported in the literature. Inputs to the model include age, height, weight, clothing, physical activity and ambient conditions, including temperature, humidity and wind velocity. Iteration of heat transport equations and a thermoregulatory component yields temporal data of segment surface temperature. Our model was found to be in close agreement with experimentally collected data, with a maximum deviation from literature values of approximately 0.80%. By comparing the predicted human thermal signature to deblurred LWIR images and then fusing this information at the feature level with high-resolution electro-optical image data, we can facilitate identity detection of objects in a scene acquired under different conditions. Ultimately, our goal is to differentiate humans from their surroundings and label non-human objects as thermal clutter.

  12. LCoS-SLM technology based on Digital Electro-optics Platform and using in dynamic optics for application development

    Science.gov (United States)

    Tsai, Chun-Wei; Wang, Chen; Lyu, Bo-Han; Chu, Chen-Hsien

    2017-08-01

    Digital Electro-optics Platform is the main concept of Jasper Display Corp. (JDC) to develop various applications. These applications are based on our X-on-Silicon technologies, for example, X-on-Silicon technologies could be used on Liquid Crystal on Silicon (LCoS), Micro Light-Emitting Diode on Silicon (μLEDoS), Organic Light-Emitting Diode on Silicon (OLEDoS), and Cell on Silicon (CELLoS), etc. LCoS technology is applied to Spatial Light Modulator (SLM), Dynamic Optics, Wavelength Selective Switch (WSS), Holographic Display, Microscopy, Bio-tech, 3D Printing and Adaptive Optics, etc. In addition, μLEDoS technology is applied to Augmented Reality (AR), Head Up Display (HUD), Head-mounted Display (HMD), and Wearable Devices. Liquid Crystal on Silicon - Spatial Light Modulator (LCoSSLM) based on JDC's On-Silicon technology for both amplitude and phase modulation, have an expanding role in several optical areas where light control on a pixel-by-pixel basis is critical for optimum system performance. Combination of the advantage of hardware and software, we can establish a "dynamic optics" for the above applications or more. Moreover, through the software operation, we can control the light more flexible and easily as programmable light processor.

  13. 2D materials in electro-optic modulation: energy efficiency, electrostatics, mode overlap, material transfer and integration

    Science.gov (United States)

    Ma, Zhizhen; Hemnani, Rohit; Bartels, Ludwig; Agarwal, Ritesh; Sorger, Volker J.

    2018-02-01

    Here we discuss the physics of electro-optic modulators deploying 2D materials. We include a scaling laws analysis and show how energy-efficiency and speed change for three underlying cavity systems as a function of critical device length scaling. A key result is that the energy-per-bit of the modulator is proportional to the volume of the device, thus making the case for submicron-scale modulators possible deploying a plasmonic optical mode. We then show how Graphene's Pauli-blocking modulation mechanism is sensitive to the device operation temperature, whereby a reduction of the temperature enables a 10× reduction in modulator energy efficiency. Furthermore, we show how the high-index tunability of graphene is able to compensate for the small optical overlap factor of 2D-based material modulators, which is unlike classical silicon-based dispersion devices. Lastly, we demonstrate a novel method towards a 2D material printer suitable for cross-contamination free and on-demand printing. The latter paves the way to integrate 2D materials seamlessly into taped-out photonic chips.

  14. Self-Raman Nd:YVO4 Laser and Electro-Optic Technology for Space-Based Sodium Lidar Instrument

    Science.gov (United States)

    Krainak, Michael A.; Yu, Anthony W.; Janches, Diego; Jones, Sarah L.; Blagojevic, Branimir; Chen, Jeffrey

    2014-01-01

    We are developing a laser and electro-optic technology to remotely measure Sodium (Na) by adapting existing lidar technology with space flight heritage. The developed instrumentation will serve as the core for the planning of an Heliophysics mission targeted to study the composition and dynamics of Earth's mesosphere based on a spaceborne lidar that will measure the mesospheric Na layer. We present performance results from our diode-pumped tunable Q-switched self-Raman c-cut Nd:YVO4 laser with intra-cavity frequency doubling that produces multi-watt 589 nm wavelength output. The c-cut Nd:YVO4 laser has a fundamental wavelength that is tunable from 1063-1067 nanometers. A CW (Continuous Wave) External Cavity diode laser is used as a injection seeder to provide single-frequency grating tunable output around 1066 nanometers. The injection-seeded self-Raman shifted Nd:VO4 laser is tuned across the sodium vapor D2 line at 589 nanometers. We will review technologies that provide strong leverage for the sodium lidar laser system with strong heritage from the Ice Cloud and Land Elevation Satellite-2 (ICESat-2) Advanced Topographic Laser Altimeter System (ATLAS). These include a space-qualified frequency-doubled 9 watts-at-532-nanometer wavelength Nd:YVO4 laser, a tandem interference filter temperature-stabilized fused-silica-etalon receiver and high-bandwidth photon-counting detectors.

  15. Effect of Barium Titanate Particles on Dielectric and Electro-Optical Properties of a Smectic-a Liquid Crystal

    Science.gov (United States)

    Ramazanov, M. A.; Imamaliyev, A. R.; Humbatov, Sh. A.; Agamaliev, Z. A.

    2018-02-01

    The effect of submicron ferroelectric BaTiO3 particles on the dielectric and electro-optical properties of the smectic-A liquid crystal (LC) with a high negative dielectric anisotropy is investigated. It is shown that the addition of BaTiO3 particles with a weight amount of 1% reduces insignificantly the transverse dielectric permittivity component ɛ ⊥ of, but significantly increases the longitudinal dielectric permittivity component ɛ // of the smectic-A LC. As a result, the anisotropy of the dielectric permittivity Δɛ = ɛ // - ɛ ⊥ of the smectic-A LC decreases. The addition of BaTiO3 particles shifts the dispersion ɛ ⊥ toward lower frequencies. Both components of the electrical conductivity of LC colloid + BaTiO3 are an order of magnitude higher than of the pure LC. The threshold voltage of the homeotropic-planar transition of the colloid is twice smaller, and its velocity is 6 times higher in comparison with the pure LC. A simple model explaining qualitatively all results obtained is presented.

  16. Multi-Site Simultaneous Time-Resolved Photometry with a Low Cost Electro-Optics System †

    Science.gov (United States)

    Gasdia, Forrest; Barjatya, Aroh; Bilardi, Sergei

    2017-01-01

    Sunlight reflected off of resident space objects can be used as an optical signal for astrometric orbit determination and for deducing geometric information about the object. With the increasing population of small satellites and debris in low Earth orbit, photometry is a powerful tool in operational support of space missions, whether for anomaly resolution or object identification. To accurately determine size, shape, spin rate, status of deployables, or attitude information of an unresolved resident space object, multi-hertz sample rate photometry is required to capture the relatively rapid changes in brightness that these objects can exhibit. OSCOM, which stands for Optical tracking and Spectral characterization of CubeSats for Operational Missions, is a low cost and portable telescope system capable of time-resolved small satellite photometry, and is field deployable on short notice for simultaneous observation from multiple sites. We present the electro-optical design principles behind OSCOM and light curves of the 1.5 U DICE-2 CubeSat and simultaneous observations of the main body of the ASTRO-H satellite after its fragmentation event. PMID:28556802

  17. Realization of a free-space 2 × 4 90° optical hybrid based on the birefringence and electro-optic effects of crystals

    International Nuclear Information System (INIS)

    Wan, Lingyu; Zhou, Yu; Liu, Liren; Sun, Jianfeng

    2013-01-01

    A free-space 2 × 4 90° optical hybrid with electro-optic modulation is presented. The hybrid principally consists of two pairs of electro-optic crystal plates coated with gold electrodes and a polarization analyzer. The optical hybrid uses the birefringence effect of a crystal to split and combine a signal beam and a local oscillator beam, uses the electro-optic effect to introduce a phase modulation and produce a phase shift, and outputs four-channel signal/local oscillator mixed beams whose phase difference can be adjusted continuously. A LiNbO 3 crystal is used to design and manufacture the space optical hybrid, and an experimental system is used to verify its performance. The results show that the output phase of the hybrid is continuously adjustable, enabling the hybrid to function perfectly as a 2 × 4 90° space optical hybrid under an appropriate electric field, and that the phase error can be compensated for by an electric field adjustment. (paper)

  18. An electro-optical timing diagnostic for pump-probe experiments at the free-electron laser in Hamburg FLASH

    International Nuclear Information System (INIS)

    Azima, Armin

    2009-07-01

    Femtosecond pump-probe experiments have extensively been used to follow atomic and molecular motion in time. The very intense extreme ultraviolet XUV light of the Free electron LASer in Hamburg FLASH facility allows to investigate fundamental processes such as direct one or few photon inner shell ionizations. A supplementary Ti:Sapphire near infrared femtosecond laser system allows to perform two-color pump-probe experiments with FLASH involving intense laser fields of hugely different photon energies. Within this work a bunch arrival measurement system has been built, which assists these two-color pump-probe experiments to reduce the temporal jitter of FLASH and to increase the temporal resolution. The diagnostic is based upon an electro-optical detection scheme and measures the relative arrival time between the Ti:Sapphire femtosecond pulse and the electron bunch, which generates the self-amplified by stimulated emission SASE XUV pulse in the undulator section of FLASH. Key feature of the diagnostic is a 150 m long glass fiber pulse transport line, which inflicts non-linear dispersion. A dispersion control system to compensate for this higher order dispersion has been developed including the control and programming of a spatial light phase modulator. It was possible to transport a 90 fs FWHM short near infrared femtosecond laser pulse Fourier limited by the dispersion compensated glass fiber. The electro-optical signal induced by the FLASH electron bunch was generated, characterized and optimized. The signal features beside the designated bunch arrival timing capability the additional possibility to measure the longitudinal electron bunch density distribution of an arbitrary bunch of FLASH in a single shot with a temporal resolution of below 100 fs RMS. Timing and bunch analysis capabilities of the developed diagnostic have been cross-checked with other comparable diagnostics at FLASH like the transversal deflecting cavity structure named LOLA. Finally, the

  19. An electro-optical timing diagnostic for pump-probe experiments at the free-electron laser in Hamburg FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Azima, Armin

    2009-07-15

    Femtosecond pump-probe experiments have extensively been used to follow atomic and molecular motion in time. The very intense extreme ultraviolet XUV light of the Free electron LASer in Hamburg FLASH facility allows to investigate fundamental processes such as direct one or few photon inner shell ionizations. A supplementary Ti:Sapphire near infrared femtosecond laser system allows to perform two-color pump-probe experiments with FLASH involving intense laser fields of hugely different photon energies. Within this work a bunch arrival measurement system has been built, which assists these two-color pump-probe experiments to reduce the temporal jitter of FLASH and to increase the temporal resolution. The diagnostic is based upon an electro-optical detection scheme and measures the relative arrival time between the Ti:Sapphire femtosecond pulse and the electron bunch, which generates the self-amplified by stimulated emission SASE XUV pulse in the undulator section of FLASH. Key feature of the diagnostic is a 150 m long glass fiber pulse transport line, which inflicts non-linear dispersion. A dispersion control system to compensate for this higher order dispersion has been developed including the control and programming of a spatial light phase modulator. It was possible to transport a 90 fs FWHM short near infrared femtosecond laser pulse Fourier limited by the dispersion compensated glass fiber. The electro-optical signal induced by the FLASH electron bunch was generated, characterized and optimized. The signal features beside the designated bunch arrival timing capability the additional possibility to measure the longitudinal electron bunch density distribution of an arbitrary bunch of FLASH in a single shot with a temporal resolution of below 100 fs RMS. Timing and bunch analysis capabilities of the developed diagnostic have been cross-checked with other comparable diagnostics at FLASH like the transversal deflecting cavity structure named LOLA. Finally, the

  20. Designing and commissioning of a setup for timing-jitter measurements using electro-optic temporal decoding

    Energy Technology Data Exchange (ETDEWEB)

    Borissenko, Dennis

    2016-12-15

    Precise measurements of the arrival time jitter between the ionization laser, used to create the plasma, and the driver beam in the PWFA setup of the FLASHForward project are of high interest for the operation and optimization of the experiment. In this thesis, an electro-optic temporal decoding (EOTD) setup with near crossed polarizer detection scheme is presented, which can measure the timing-jitter to an accuracy of around 30 fs. This result was obtained during several measurements conducted at the coherent transition radiation beamline CTR141 at FLASH, using a 100 μm thick GaP crystal and coherent diffraction/transition radiation, generated from the FLASH1 electron bunches. Measurements were performed during long and short electron bunch operation at FLASH, showing that best results are obtained with CDR from long electron bunches. Utilizing CTR led to a higher EO signal and ''over-compensation'' of the SHG background level during the measurement, which resulted in a double-peak structure of the observed THz pulses. To resolve the single-cycle nature of these THz pulses, the SHG background had to be adjusted properly. Furthermore, EOTD measurements during a short bunch operation run at FLASH exhibited strong oscillations in the EO signal, which were suspected to come either from internal lattice resonances of the EO crystal or internal reflections, or excitation of water vapor in the humid air in the laboratory. The oscillations spoiled the observed EOTD trace leading to no sensible measurements of the arrival time jitter during this short bunch operation. To evaluate the capabilities of the setup for monitoring the timing jitter of short PWFA accelerated electron bunches or very short driver bunches at FLASHForward, further investigations on the observed oscillations in the EOTD traces have to be performed during short bunch operation at FLASH with different crystals and under vacuum conditions, to understand the oscillations of the EO

  1. Topological, chemical and electro-optical characteristics of riboflavin-doped artificial and natural DNA thin films.

    Science.gov (United States)

    Gnapareddy, Bramaramba; Dugasani, Sreekantha Reddy; Son, Junyoung; Park, Sung Ha

    2018-02-01

    DNA is considered as a useful building bio-material, and it serves as an efficient template to align functionalized nanomaterials. Riboflavin (RF)-doped synthetic double-crossover DNA (DX-DNA) lattices and natural salmon DNA (SDNA) thin films were constructed using substrate-assisted growth and drop-casting methods, respectively, and their topological, chemical and electro-optical characteristics were evaluated. The critical doping concentrations of RF ([RF] C , approx. 5 mM) at given concentrations of DX-DNA and SDNA were obtained by observing the phase transition (from crystalline to amorphous structures) of DX-DNA and precipitation of SDNA in solution above [RF] C . [RF] C are verified by analysing the atomic force microscopy images for DX-DNA and current, absorbance and photoluminescence (PL) for SDNA. We study the physical characteristics of RF-embedded SDNA thin films, using the Fourier transform infrared spectrum to understand the interaction between the RF and DNA molecules, current to evaluate the conductance, absorption to understand the RF binding to the DNA and PL to analyse the energy transfer between the RF and DNA. The current and UV absorption band of SDNA thin films decrease up to [RF] C followed by an increase above [RF] C . By contrast, the PL intensity illustrates the reverse trend, as compared to the current and UV absorption behaviour as a function of the varying [RF]. Owing to the intense PL characteristic of RF, the DNA lattices and thin films with RF might offer immense potential to develop efficient bio-sensors and useful bio-photonic devices.

  2. Topological, chemical and electro-optical characteristics of riboflavin-doped artificial and natural DNA thin films

    Science.gov (United States)

    Gnapareddy, Bramaramba; Dugasani, Sreekantha Reddy; Son, Junyoung; Park, Sung Ha

    2018-02-01

    DNA is considered as a useful building bio-material, and it serves as an efficient template to align functionalized nanomaterials. Riboflavin (RF)-doped synthetic double-crossover DNA (DX-DNA) lattices and natural salmon DNA (SDNA) thin films were constructed using substrate-assisted growth and drop-casting methods, respectively, and their topological, chemical and electro-optical characteristics were evaluated. The critical doping concentrations of RF ([RF]C, approx. 5 mM) at given concentrations of DX-DNA and SDNA were obtained by observing the phase transition (from crystalline to amorphous structures) of DX-DNA and precipitation of SDNA in solution above [RF]C. [RF]C are verified by analysing the atomic force microscopy images for DX-DNA and current, absorbance and photoluminescence (PL) for SDNA. We study the physical characteristics of RF-embedded SDNA thin films, using the Fourier transform infrared spectrum to understand the interaction between the RF and DNA molecules, current to evaluate the conductance, absorption to understand the RF binding to the DNA and PL to analyse the energy transfer between the RF and DNA. The current and UV absorption band of SDNA thin films decrease up to [RF]C followed by an increase above [RF]C. By contrast, the PL intensity illustrates the reverse trend, as compared to the current and UV absorption behaviour as a function of the varying [RF]. Owing to the intense PL characteristic of RF, the DNA lattices and thin films with RF might offer immense potential to develop efficient bio-sensors and useful bio-photonic devices.

  3. Designing and commissioning of a setup for timing-jitter measurements using electro-optic temporal decoding

    International Nuclear Information System (INIS)

    Borissenko, Dennis

    2016-12-01

    Precise measurements of the arrival time jitter between the ionization laser, used to create the plasma, and the driver beam in the PWFA setup of the FLASHForward project are of high interest for the operation and optimization of the experiment. In this thesis, an electro-optic temporal decoding (EOTD) setup with near crossed polarizer detection scheme is presented, which can measure the timing-jitter to an accuracy of around 30 fs. This result was obtained during several measurements conducted at the coherent transition radiation beamline CTR141 at FLASH, using a 100 μm thick GaP crystal and coherent diffraction/transition radiation, generated from the FLASH1 electron bunches. Measurements were performed during long and short electron bunch operation at FLASH, showing that best results are obtained with CDR from long electron bunches. Utilizing CTR led to a higher EO signal and ''over-compensation'' of the SHG background level during the measurement, which resulted in a double-peak structure of the observed THz pulses. To resolve the single-cycle nature of these THz pulses, the SHG background had to be adjusted properly. Furthermore, EOTD measurements during a short bunch operation run at FLASH exhibited strong oscillations in the EO signal, which were suspected to come either from internal lattice resonances of the EO crystal or internal reflections, or excitation of water vapor in the humid air in the laboratory. The oscillations spoiled the observed EOTD trace leading to no sensible measurements of the arrival time jitter during this short bunch operation. To evaluate the capabilities of the setup for monitoring the timing jitter of short PWFA accelerated electron bunches or very short driver bunches at FLASHForward, further investigations on the observed oscillations in the EOTD traces have to be performed during short bunch operation at FLASH with different crystals and under vacuum conditions, to understand the oscillations of the EO

  4. Electro-optic studies of the flexoelectric effect in chiral nematic liquid crystals

    International Nuclear Information System (INIS)

    Musgrave, B.

    2000-01-01

    With the advent of global telecommunications networks and the Internet, the development of portable display technology has gained a new impetus. Liquid crystal devices have played a major role in this area, most conspicuously as displays in laptop computers. To date, these liquid crystalline devices have been generally based on the rather slow (∼ 30 ms) dielectric response of the achiral nematic liquid crystal phase, although more expensive devices based on the faster ( -1 m -1 , and are the highest measured to date: the highest value previously published is 0.12 C N -1 m -1 , measured for the commercial mixture TM216. In order to interpret the effect of the bimesogens' molecular structure, achiral nematic monomesogens and bimesogens have been doped with chiral additives and the resultant mixtures' flexoelectro-optic properties have been analysed. From this work it has been possible to determine that the polar cyanobiphenyl group is the key to the strong response in the estradiol-cyanobiphenyl materials. In conclusion, a recommendation is made, for the first time, for a general molecular structure likely to exhibit a strong flexoelectro-optic response: namely, bimesogenic materials composed of highly polar end groups separated by a flexible spacer. (author)

  5. Using complementary tools to characterize the effects of radiation in electro-optic polymeric materials

    Science.gov (United States)

    Perez-Moreno, Javier

    2015-09-01

    Understanding the fundamental mechanisms behind the radiation resistance of polymers and molecules would allow us to tailor new materials with enhanced performance in space and adverse environments. Previous studies of the radiation effects on polymer-based photonic materials indicate that they are very dependent on the choice of polymer-host and guest-chromophores. The best results have been reported from the combination of CLD1 as a guest-chromophore doped in APC as host polymer, where improvement of the performance was observed upon gamma-irradiation at moderate doses. In this paper, we report on the different complementary tools that have been tried to characterize the origin of such enhancement: characterization of the linear and nonlinear response, characterization of chemical properties, and application of an all-optical protocol. We derive some general conclusions by contrasting the results of each characterization, and propose complementary experiments based on microscopy techniques.

  6. Fast switchable ferroelectric liquid crystal gratings with two electro-optical modes

    International Nuclear Information System (INIS)

    Ma, Ying; Srivastava, A. K.; Chigrinov, V. G.; Kwok, H.-S.; Wang, Xiaoqian

    2016-01-01

    In this article, we reveal a theoretical and experimental illustration of the Ferroelectric liquid crystal (FLC) grating fabricated by mean of patterned alignment based on photo-alignment. The complexity related to the mismatching of the predefined alignment domains on the top and bottom substrate has been avoided by incorporating only one side photo aligned substrate while the other substrate does not have any alignment layer. Depending on the easy axis in the said alignment domains and the azimuth plane of the impinging polarized light, the diffracting element can be tuned in two modes i.e. DIFF/OFF switchable and DIFF/TRANS switchable modes, which can be applied to different applications. The diffraction profile has been illustrated theoretically that fits well with the experimental finding and thus the proposed diffraction elements with fast response time and high diffraction efficiency could find application in many modern devices.

  7. Investigation of chromophore-chromophore interaction by electro-optic measurements, linear dichroism, x-ray scattering, and density-functional calculations

    DEFF Research Database (Denmark)

    Apitz, Dirk; Bertram, R.P.; Benter, N.

    2005-01-01

    Free-beam interferometry and angle-resolved absorption spectra are used to investigate the linear electro-optic coefficients and the linear dichroism in photoaddressable bis-azo copolymer thin films. From the first- and second order parameters deduced, the chromophore orientation distribution is ...... by density-functional calculations support the picture of differently aligned bis-azo dye molecules in a trans,trans configuration. Complementary wide-angle x-ray scattering is recorded to confirm the various kinds of ordering in samples poled at different temperatures....

  8. Novel electro-optical phase modulator based on GaInAs/InP modulation-doped quantum-well structures

    DEFF Research Database (Denmark)

    Thirstrup, C.

    1992-01-01

    A novel electro-optical phase modulator working at 1.55 µm is analyzed and proposed. It is shown by a numerical model that in a GaInAs/InP pn-nin-pn multiple-quantum-well waveguide structure, large optical phase modulation can be obtained at small intensity modulation and with improved performance...... compared to what is achieved in quantum confined Stark effect modulators of the same material system. The device proposed is based on a modulation of the quasi-Fermi energies of the electrons in the GaInAs quantum wells. This operational principle allows GHz modulation frequencies. Applied Physics Letters...

  9. Stability of sinusoidal responses of marginally stable bandpass sigma delta modulators

    OpenAIRE

    Ho, Charlotte Yuk-Fan; Ling, Bingo Wing-Kuen; Reiss, Joshua

    2006-01-01

    In this paper, we analyze the stability of the sinusoidal responses of second order interpolative marginally stable bandpass sigma delta modulators (SDMs) with the sum of the numerator and denominator polynomials equal to one and explore new results on the more general second order interpolative marginally stable bandpass SDMs. These results can be further extended to the high order interpolative marginally stable bandpass SDMs.

  10. Development and Characterization of a Small Spacecraft Electro-Optic Scanner for Free-Space Laser Communications

    Science.gov (United States)

    Davis, Scott; Lichter, Michael; Raible, Daniel

    2016-01-01

    Emergent data-intensive missions coupled with dramatic reductions in spacecraft size plus an increasing number of space-based missions necessitates new high performance, compact and low cost communications technology. Free space optical communications offer advantages including orders of magnitude increase for data rate performance, increased security, immunity to jamming and lack of frequency allocation requirements when compared with conventional radio frequency (RF) means. The spatial coherence and low divergence associated with the optical frequencies of laser communications lends themselves to superior performance, but this increased directionality also creates one of the primary technical challenges in establishing a laser communications link by repeatedly and reliably pointing the beam onto the receive aperture. Several solutions have emerged from wide angle (slow) mechanical articulation systems, fine (fast) steering mirrors and rotating prisms, inertial compensation gyros and vibration isolation cancellation systems, but each requires moving components and imparts a measured amount of burden on the host platform. The complexity, cost and size of current mechanically scanned solutions limits their platform applicability, and restricts the feasibility of deploying optical communications payloads on very compact spacecraft employing critical systems. A high speed, wide angle, non-mechanical solution is therefore desirable. The purpose of this work is to share the development, testing, and demonstration of a breadboard prototype electro-optic (EO) scanned laser-communication link (see Figure 1). This demonstration is a step toward realizing ultra-low Size, Weight and Power (SWaP) SmallSat/MicroSat EO non-mechanical laser beam steering modules for high bandwidth ( greater than Gbps) free-space data links operating in the 1550 nm wavelength bands. The elimination of all moving parts will dramatically reduce SWaP and cost, increase component lifetime and

  11. Impact of severe cracked germanium (111 substrate on aluminum indium gallium phosphate light-emitting-diode’s electro-optical performance

    Directory of Open Access Journals (Sweden)

    Annaniah Luruthudass

    2016-01-01

    Full Text Available Cracked die is a serious failure mode in the Light Emitting Diode (LED industry – affecting LED quality and long-term reliability performance. In this paper an investigation has been carried out to find the correlation between severe cracked germanium (Ge substrate of an aluminum indium gallium phosphate (AlInGaP LED and its electro-optical performance after the Temperature Cycle (TC test. The LED dice were indented at several bond forces using a die bonder. The indented dice were analysed using a Scanning Electron Microscope (SEM. The result showed that severe cracks were observed at 180 gF onward. As the force of indentation increases, crack formation also becomes more severe thus resulting in the chipping of the substrate. The cracked dies were packaged and the TC test was performed. The results did not show any electro-optical failure or degradation, even after a 1000 cycle TC test. Several mechanically cross-sectioned cracked die LEDs, were analysed using SEM and found that no crack reached the active layer. This shows that severely cracked Ge substrate are able to withstand a −40°C/+100°C TC test up to 1000 cycles and LED optical performance is not affected. A small leakage current was observed in all of the cracked die LEDs in comparison to the reference unit. However, this value is smaller than the product specification and is of no concern.

  12. Wannier–Stark electro-optical effect, quasi-guided and photonic modes in 2D macroporous silicon structures with SiO{sub 2} coatings

    Energy Technology Data Exchange (ETDEWEB)

    Karachevtseva, L., E-mail: lakar@isp.kiev.ua [Ningbo University of Technology, No. 55-155 Cui Bai Road, Ningbo 315016 (China); V. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine, 41 Nauky Pr., 03028 Kyiv (Ukraine); Goltviansky, Yu., E-mail: ecoflam@voliacable.com [V. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine, 41 Nauky Pr., 03028 Kyiv (Ukraine); Sapelnikova, O., E-mail: e_kolesnik84@mail.ru [V. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine, 41 Nauky Pr., 03028 Kyiv (Ukraine); Lytvynenko, O., E-mail: lytvole@gmail.com [V. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine, 41 Nauky Pr., 03028 Kyiv (Ukraine); Stronska, O., E-mail: yaschichek@ukr.net [V. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine, 41 Nauky Pr., 03028 Kyiv (Ukraine); Bo, Wang, E-mail: bo305@hotmail.com [Ningbo University of Technology, No. 55-155 Cui Bai Road, Ningbo 315016 (China); Kartel, M., E-mail: nikar@kartel.kiev.ua [Ningbo University of Technology, No. 55-155 Cui Bai Road, Ningbo 315016 (China)

    2016-12-01

    Highlights: • The IR absorption spectra of oxidized macroporous silicon were studied. • The Wannier–Stark electro-optical effect on Si-SiO{sub 2} boundary was confirmed. • An additional electric field of quasi-guided optical modes was evaluated. • The photonic modes and band gaps were measured as peculiarities in absorption spectra. - Abstract: Opportunities to enhance the properties of structured surfaces were demonstrated on 2D macroporous silicon structures with SiO{sub 2} coatings. We investigated the IR light absorption oscillations in macroporous silicon structures with SiO2 coatings 0–800 nm thick. The Wannier–Stark electro-optical effect due to strong electric field on Si-SiO{sub 2}boundary and an additional electric field of quasi-guided optical modes were taken into account. The photonic modes and band gaps were also considered as peculiarities in absorbance spectra of macroporous silicon structures with a thick SiO{sub 2} coating. The photonic modes do not coincide with the quasi-guided modes in the silicon matrix and do not appear in absorption spectra of 2D macroporous silicon structures with surface nanocrystals.

  13. Land cover classification accuracy from electro-optical, X, C, and L-band Synthetic Aperture Radar data fusion

    Science.gov (United States)

    Hammann, Mark Gregory

    The fusion of electro-optical (EO) multi-spectral satellite imagery with Synthetic Aperture Radar (SAR) data was explored with the working hypothesis that the addition of multi-band SAR will increase the land-cover (LC) classification accuracy compared to EO alone. Three satellite sources for SAR imagery were used: X-band from TerraSAR-X, C-band from RADARSAT-2, and L-band from PALSAR. Images from the RapidEye satellites were the source of the EO imagery. Imagery from the GeoEye-1 and WorldView-2 satellites aided the selection of ground truth. Three study areas were chosen: Wad Medani, Sudan; Campinas, Brazil; and Fresno- Kings Counties, USA. EO imagery were radiometrically calibrated, atmospherically compensated, orthorectifed, co-registered, and clipped to a common area of interest (AOI). SAR imagery were radiometrically calibrated, and geometrically corrected for terrain and incidence angle by converting to ground range and Sigma Naught (?0). The original SAR HH data were included in the fused image stack after despeckling with a 3x3 Enhanced Lee filter. The variance and Gray-Level-Co-occurrence Matrix (GLCM) texture measures of contrast, entropy, and correlation were derived from the non-despeckled SAR HH bands. Data fusion was done with layer stacking and all data were resampled to a common spatial resolution. The Support Vector Machine (SVM) decision rule was used for the supervised classifications. Similar LC classes were identified and tested for each study area. For Wad Medani, nine classes were tested: low and medium intensity urban, sparse forest, water, barren ground, and four agriculture classes (fallow, bare agricultural ground, green crops, and orchards). For Campinas, Brazil, five generic classes were tested: urban, agriculture, forest, water, and barren ground. For the Fresno-Kings Counties location 11 classes were studied: three generic classes (urban, water, barren land), and eight specific crops. In all cases the addition of SAR to EO resulted

  14. Behavioural responses of stable flies to cattle manure slurry associated odourants

    Science.gov (United States)

    Stable flies (Stomoxys calcitrans [Diptera: Muscidae] L.) are blood-feeding synanthropic pests, which cause significant economic losses in livestock. Stable fly antennae contain olfactory sensilla responsive to host and host environment-associated odours. Field observation indicated that the abundan...

  15. Is the response of aphids to alarm pheromone stable?

    Czech Academy of Sciences Publication Activity Database

    Thieme, T.; Dixon, Anthony F. G.

    2015-01-01

    Roč. 139, č. 10 (2015), s. 741-746 ISSN 0931-2048 R&D Projects: GA MŠk(CZ) LO1415 Institutional support: RVO:67179843 Keywords : (E)-β-farnesene * dropping response * habituation * Leguminosae * pea aphid Subject RIV: EH - Ecology, Behaviour Impact factor: 1.517, year: 2015

  16. Factors responsible for a stable biosphere of silicon utilizing organisms

    Science.gov (United States)

    Mitra, D.; Das, S.

    2012-12-01

    -Pg boundary. All these evidences support the role of the unique characteristics of silicon utilizing organisms in maintaining their stable biosphere on earth.

  17. Demonstration of a near-IR line-referenced electro-optical laser frequency comb for precision radial velocity measurements in astronomy

    Science.gov (United States)

    Yi, X.; Vahala, K.; Li, J.; Diddams, S.; Ycas, G.; Plavchan, P.; Leifer, S.; Sandhu, J.; Vasisht, G.; Chen, P.; Gao, P.; Gagne, J.; Furlan, E.; Bottom, M.; Martin, E. C.; Fitzgerald, M. P.; Doppmann, G.; Beichman, C.

    2016-01-01

    An important technique for discovering and characterizing planets beyond our solar system relies upon measurement of weak Doppler shifts in the spectra of host stars induced by the influence of orbiting planets. A recent advance has been the introduction of optical frequency combs as frequency references. Frequency combs produce a series of equally spaced reference frequencies and they offer extreme accuracy and spectral grasp that can potentially revolutionize exoplanet detection. Here we demonstrate a laser frequency comb using an alternate comb generation method based on electro-optical modulation, with the comb centre wavelength stabilized to a molecular or atomic reference. In contrast to mode-locked combs, the line spacing is readily resolvable using typical astronomical grating spectrographs. Built using commercial off-the-shelf components, the instrument is relatively simple and reliable. Proof of concept experiments operated at near-infrared wavelengths were carried out at the NASA Infrared Telescope Facility and the Keck-II telescope. PMID:26813804

  18. Demonstration of a near-IR line-referenced electro-optical laser frequency comb for precision radial velocity measurements in astronomy.

    Science.gov (United States)

    Yi, X; Vahala, K; Li, J; Diddams, S; Ycas, G; Plavchan, P; Leifer, S; Sandhu, J; Vasisht, G; Chen, P; Gao, P; Gagne, J; Furlan, E; Bottom, M; Martin, E C; Fitzgerald, M P; Doppmann, G; Beichman, C

    2016-01-27

    An important technique for discovering and characterizing planets beyond our solar system relies upon measurement of weak Doppler shifts in the spectra of host stars induced by the influence of orbiting planets. A recent advance has been the introduction of optical frequency combs as frequency references. Frequency combs produce a series of equally spaced reference frequencies and they offer extreme accuracy and spectral grasp that can potentially revolutionize exoplanet detection. Here we demonstrate a laser frequency comb using an alternate comb generation method based on electro-optical modulation, with the comb centre wavelength stabilized to a molecular or atomic reference. In contrast to mode-locked combs, the line spacing is readily resolvable using typical astronomical grating spectrographs. Built using commercial off-the-shelf components, the instrument is relatively simple and reliable. Proof of concept experiments operated at near-infrared wavelengths were carried out at the NASA Infrared Telescope Facility and the Keck-II telescope.

  19. Research on volume metrology method of large vertical energy storage tank based on internal electro-optical distance-ranging method

    Science.gov (United States)

    Hao, Huadong; Shi, Haolei; Yi, Pengju; Liu, Ying; Li, Cunjun; Li, Shuguang

    2018-01-01

    A Volume Metrology method based on Internal Electro-optical Distance-ranging method is established for large vertical energy storage tank. After analyzing the vertical tank volume calculation mathematical model, the key processing algorithms, such as gross error elimination, filtering, streamline, and radius calculation are studied for the point cloud data. The corresponding volume values are automatically calculated in the different liquids by calculating the cross-sectional area along the horizontal direction and integrating from vertical direction. To design the comparison system, a vertical tank which the nominal capacity is 20,000 m3 is selected as the research object, and there are shown that the method has good repeatability and reproducibility. Through using the conventional capacity measurement method as reference, the relative deviation of calculated volume is less than 0.1%, meeting the measurement requirements. And the feasibility and effectiveness are demonstrated.

  20. An atomic spin precession detection method based on electro-optic modulation in an all-optical K–Rb hybrid atomic magnetometer

    International Nuclear Information System (INIS)

    Hu, Yanhui; Liu, Xuejing; Li, Yang; Yao, Han; Dai, Lingling; Yang, Biyao; Ding, Ming

    2017-01-01

    We present an ultrahigh-sensitivity electro-optic modulator (EOM) detection method for detecting the atomic Larmor precession in an all-optical K–Rb hybrid atomic magnetometer operating in the spin-exchange relaxation-free regime. A magnetic field sensitivity of ∼10 f T Hz −1/2 has been achieved by optimizing the probe laser parameters and the EOM modulation conditions, which is comparable to that with the Faraday modulation method and has a better performance than the balanced polarimetry method in the low frequency range. The EOM detection method in the atomic magnetometer presents several advantages, such as simple structure, no extra magnetic noise, moderate thermal effect, high measurement sensitivity and reliable stability. It is demonstrated to be feasible for the improved compactness and simplicity of atomic magnetic field measurement devices in the future. (paper)

  1. Experimental and numeric studies of one electro-optical flexible pipe (umbilical); Estudos numericos e experimentais de um umbilical eletro-optico

    Energy Technology Data Exchange (ETDEWEB)

    Lepore, Paula Ferreira; Buelta Martinez, Miguel Angel [Sao Paulo Univ., SP (Brazil). Escola Politecnica

    2005-07-01

    This work had as objective to develop, to implant, to survey and to test an experimental and numerical model of structural, applicable analysis of umbilical structures. An ample study of the behavior of its constituent layers was carried through, in special of its nucleus and material constituents, when operating under different conditions of tensions and deformations. As support for this work, experimental tests for one type of electro-optic umbilical with typical transversal section had been carried through. This was made with the intention to optimize the developed numerical model. With this model of structural analysis, the project of umbilicals could highly improved, in terms of the total weight of the handle, which is one of the great problems for its use in great depths, with the maximum of efficiency and the minimum of losses, foreseeing and hindering operation imperfections that can come to occur due to extreme deformation or electric rupture of the layers, hoses or handles. (author)

  2. Low-lying dipole response in stable and unstable nuclei

    International Nuclear Information System (INIS)

    Brenna, M; Colò, G; Bortignon, P F; Pozzi, G; Roca-Maza, X; Mizuyama, K

    2013-01-01

    The presence of some low-lying (pygmy) strength in the dipole spectrum, at excitation energy well below the isovector giant dipole energy, has been confirmed in several nuclei. The microscopic structure and the nature of these states, in particular the possible collective nature and the isospin character, are currently under strong debate. In addition, a relation with the isovector properties of the equation of state of nuclear matter, such as the symmetry energy or its slope, has been proposed. We present a detailed analysis of Skyrme Hartree–Fock plus random phase approximation (RPA) predictions for both the isoscalar and isovector dipole responses, of different neutron-rich nuclei ( 68 Ni, 132 Sn and 208 Pb). All of them show a low-energy peak that increases in magnitude with increasing values of the slope of the symmetry energy at saturation. Eventually, the collectivity associated with the RPA states contributing to this peak is more pronounced in the isoscalar than in the isovector channel. (paper)

  3. Comparison of an electro-optical system and photo-conducting antenna employed as detectors of pulsed terahertz radiation by means of a new method for measuring spectral width

    Energy Technology Data Exchange (ETDEWEB)

    Grachev, Ya V; Osipova, M O; Bespalov, V G [ITMO University, St. Petersburg (Russian Federation)

    2014-12-31

    Two detection systems, electro-optical system and photoconducting system, are tested by the method suggested previously for determining the boundaries of broadband terahertz radiation in time-domain spectroscopy. From a series of measurements the error in determining the operation ranges is calculated. The terahertz spectrometer with an electro-optical detector based on a ZnTe (110) crystal of thickness 2 mm has the operation spectral range of 0.059 – 1.092 THz. The detector utilizing an iPCA-21-05-1000-800-h photo-conducting antenna with the same source of signal demonstrates a wider operation band ranging from 0.017 to 1.6 THz. The method developed makes it possible to experimentally compare the parameters of the considered terahertz spectrometers obtained under the same quality of adjustment. (laser applications and other topics in quantum electronics)

  4. Voltages and electric currents mensuration - class 15 kV - for systems electro-optical and magneto-optical; Medicao de tensoes e correntes - classe 15 kv - por sistemas eletro-opticos e magneto-opticos

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Marcos Rodrigues

    1996-07-01

    The technical feasibility of the development of a novel system measuring of high voltage and current in 15 kV distribution lines was presented. The system is basically the combination of two other systems, one conventional and other electro-optical. The conventional subsystem is based on voltage dividers and magnetic rings while the electro-optical subsystem uses LEDs, resistors, optical-fibers and photodetectors. The system was completely tested in laboratory and its main characteristics are low price, easy of installation and flexibility. Two software for data acquisition by GPIB and A/D boards were also developed. The can provide reports on voltages, currents, power and phase-power. (author)

  5. Phase Velocity Estimation of a Microstrip Line in a Stoichiometric Periodically Domain-Inverted LiTaO3 Modulator Using Electro-Optic Sampling Technique

    Directory of Open Access Journals (Sweden)

    Shintaro Hisatake

    2008-01-01

    Full Text Available We estimate the phase velocity of a modulation microwave in a quasi-velocity-matched (QVM electro-optic (EO phase modulator (QVM-EOM using EO sampling which is accurate and the most reliable technique for measuring voltage waveforms at an electrode. The substrate of the measured QVM-EOM is a stoichiometric periodically domain-inverted LiTaO3 crystal. The electric field of a standing wave in a resonant microstrip line (width: 0.5 mm, height: 0.5 mm is measured by employing a CdTe crystal as an EO sensor. The wavelength of the traveling microwave at 16.0801 GHz is determined as 3.33 mm by fitting the theoretical curve to the measured electric field distribution. The phase velocity is estimated as vm=5.35×107 m/s, though there exists about 5% systematic error due to the perturbation by the EO sensor. Relative dielectric constant of εr=41.5 is led as the maximum likelihood value that derives the estimated phase velocity.

  6. The design of the layout of faceted multi-channel electro-optical spatial coordinates measuring instrument for point-like bright objects

    Science.gov (United States)

    Repin, Vladislav A.; Gorbunova, Elena V.; Chertov, Aleksandr N.; Korotaev, Valery V.

    2017-06-01

    For many applied problems it is necessary to obtain information about the situation in a wide angular field in order to measure various parameters of objects: their spatial coordinates, instantaneous velocities, and so on. In this case, one interesting bionic approach can be used - a mosaic (or discrete, otherwise, facet) angular field. Such electro-optical system constructively imitates the visual apparatus of insects: many photodetectors like ommatidia (elements of the facet eye structure) are located on a non-planar surface. Such devices can be used in photogrammetry and aerial photography systems (if the space is sufficient), in the transport sector as vehicle orientation organs, as systems for monitoring in unmanned aerial vehicles, in endoscopy for obtaining comprehensive information on the state of various cavities, in intelligent robotic systems. In this manuscript discusses the advantages and disadvantages of multi-channeled optoelectronic systems with a mosaic angular field, presents possible options for their use, and discusses some of the design procedures performed when developing a layout of a coordinate measuring device.

  7. Electro-optic sampling at 90 degree interaction geometry for time-of-arrival stamping of ultrafast relativistic electron diffraction

    Directory of Open Access Journals (Sweden)

    C. M. Scoby

    2010-02-01

    Full Text Available In this paper we study a new geometry setup for electro-optic sampling (EOS where the electron beam runs parallel to the ⟨110⟩ face of a ZnTe crystal and the probe laser is perpendicular to it and to the beam path. The simple setup is used to encode the time-of-arrival information of a 3.5  MeV<10  pC electron bunch on the spatial profile of the laser pulse. The electric field lines inside the dielectric bend at an angle due to a relatively large (n∼3 index of refraction of the ZnTe crystal. We found theoretically and experimentally that the EOS signal can be maximized with a proper choice of incoming laser polarization angle. We achieved single-shot nondestructive measurement of the relative time of arrival between the pump and the probe beams thus improving the temporal resolution of ultrafast relativistic electron diffraction experiments.

  8. Quadratic Electro-Optic Effect in the Nonconjugated Conductive Co-polymer Iodine-doped Styrene-Butadiene-Rubber Measured at 633 nm and 1550 nm

    Science.gov (United States)

    Telang, Gurudutt; Thakur, Mrinal

    2012-02-01

    The quadratic electro-optic effect in the nonconjugated conductive co-polymer film of styrene-butadiene-rubber (SBR) has been measured using field-induced birefringence method. Thin films of styrene-butadiene-rubber have been prepared on various substrates from a chloroform solution and characterized using optical absorption spectroscopy, FTIR and DSC before and after doping with iodine. The optical absorption spectrum at low doping shows two peaks: one at 4.27 eV and the other at 3.2 eV corresponding to the radical cation and charge-transfer transition. FTIR data indicate =C-H vibration bands (964 cm-1 and 910 cm-1) of polybutadiene decrease upon doping due to transformation of the double bonds into radical cations. The Kerr coefficients as measured at 633 nm and at 1550 nm are 3.1x10-10 m/V^2 and 1.3x10-10 m/V^2 respectively. These exceptionally large values have been attributed to the subnanometer metallic domains formed upon doping and charge-transfer involving isolated double-bonds.

  9. Electro-optical time gating based on Mach-Zehnder modulator for multiple access interference elimination in optical code-division multiple access networks

    Science.gov (United States)

    Chen, Yinfang; Wang, Rong; Fang, Tao; Pu, Tao; Xiang, Peng; Zheng, Jilin; Zhu, Huatao

    2014-05-01

    An electro-optical time gating technique, which is based on an electrical return-to-zero (RZ) pulse driven Mach-Zehnder modulator (MZM) for eliminating multiple access interference (MAI) in optical code-division multiple access (OCDMA) networks is proposed. This technique is successfully simulated in an eight-user two-dimensional wavelength-hopping time-spreading system, as well as in a three-user temporal phase encoding system. Results show that in both systems the MAI noise is efficiently removed and the average received power penalty improved. Both achieve error-free transmissions at a bit rate of 2.5 Gb/s. In addition, we also individually discuss effects of parameters in two systems, such as the extinction ratio of the MZM, the duty cycle of the driven RZ pulse, and the time misalignment between the driven pulse and the decoded autocorrelation peak, on the output bit error rate performance. Our work shows that employing a common MZM as a thresholder provides another probability and an interesting cost-effective choice for a smart size, low energy, and less complex thresholding technique for integrated detection in OCDMA networks.

  10. Results from the electro-optic sensors domain of the materials and components for missiles innovation and technology partnership (phase 1)

    Science.gov (United States)

    Bray, Mark E.; Shears, Robert A.

    2013-10-01

    The Materials and Components for Missiles Innovation and Technology Partnership (ITP) is a research programme supporting research for guided weapons at Technology Readiness Levels 1 to 4. The Anglo-French initiative is supported by the DGA and the MoD, with matched funding from industry. A major objective is to foster projects which partner UK and French universities, SMEs and larger companies. The first projects started in January 2008 and the first phase completed in spring 2013. Providing funding is secured, the next phase of the programme is due to start later in 2013. Selex ES leads Domain 3 of the MCM-ITP which develops Electro-Optic sensor technology. In collaboration with DGA, MoD and MBDA, the prime contractor, we identified 4 key objectives for the first ITP phase and focussed resources on achieving these. The objectives were to enable better imagery, address operationally stressing scenarios, provide low overall through life cost and improve active and semi-active sensors Nine normal projects and one ITP innovation fund project have been supported within the domain. The technology providers have included 3 SMEs and 8 research centres from both the United Kingdom and France. Highlights of the projects are included. An outline of the priorities for the domain for the new phase ise provided and we encourage organisations with suitable technology to contact us to get involved.

  11. Synthesis and electro-optical properties of fluorene containing blue luminescent rod-coil homopolymers with pendant pyridine

    Directory of Open Access Journals (Sweden)

    Sahu Duryodhan

    2017-02-01

    Full Text Available Two well defined, blue luminescent homopolymers containing 9,9-diethylfluorene core with electron withdrawing pendant pyridine, Suzuki-coupled with the corresponding borolane of decoxy phenyl (PFPA and naphthalene (PFNA have been designed and synthesized efficiently. The obtained rod-coil polymers have the average molecular weight of 15212 (PFPA and 15130 (PFNA with polydispersity indices (PDIs 1.07 and 1.3, respectively. The polymers have good solubility and high thermal stability with the decomposition temperature of 362 °C (PFPA and 367 °C (PFNA correspondingly. Furthermore the optical and electrochemical properties of the polymers have been investigated. The polymers exhibited photoluminescence (PL maxima at 410 nm (PFPA and 414 nm (PFNA excited at 340 nm, as stable blue luminescence polymers at low concentration of 10−6 M with a quantum yield of 0.64 and 0.62, respectively. In addition the annealed (150 °C polymer films showed better stability of its photoluminescence spectra. Absorbance and fluorescence emission spectra of PFPA and PFNA were compared in order to evaluate the effects of substituent, phenyl and naphthalene in pyridine pendant fluorene moieties.

  12. Electro-optically Induced and Manipulated Terahertz Waves from Fe-doped InGaAs Surfaces

    Science.gov (United States)

    Hatem, O.

    2018-03-01

    We demonstrate the presence of dual simultaneous nonlinear mechanisms: field-induced optical rectification (FIOR) and field-induced surge current (FISC) for the generation of terahertz (THz) pulses from p-type and n-type Fe:In0.53Ga0.47As surfaces upon excitation with femtosecond laser pulses centered at 800 nm wavelength. Experimental investigations of the dependence of the generated THz waves on the incident angular optical polarization, optical irradiance, and the direction and magnitude of applied electric DC fields give confirming results to the proposed THz generation mechanisms. Applying external DC electric fields in the plane of the incident optical field shows efficient capability in manipulating the direction and phase of the generated THz waves, and controlling the refractive index of Fe:In0.53Ga0.47As material in the THz range, in addition to enhancing the emitted THz power up to two orders of magnitude. The fast and reliable response of Fe:In0.53Ga0.47As to the changes in the direction and magnitude of the optical and electrical fields suggests its use in amplitude and phase modulators, and ultrafast optoelectronic systems.

  13. Dielectric, electro-optical, and photoluminescence characteristics of ferroelectric liquid crystals on a graphene-coated indium tin oxide substrate.

    Science.gov (United States)

    Singh, Dharmendra Pratap; Gupta, Swadesh Kumar; Vimal, Tripti; Manohar, Rajiv

    2014-08-01

    Multilayer graphene was deposited on indium tin oxide (ITO) -coated glass plates and characterized by suitable techniques. A liquid crystal sample cell was designed using graphene deposited ITO glass plates without any additional treatment for alignment. Ferroelectric liquid crystal (FLC) material was filled in the sample cell. The effect of multilayer graphene on the characteristics of FLC material was investigated. The extremely high relative permittivity of pristine graphene and charge transfer between graphene and FLC material were consequences of the enormous increase in relative permittivity for the graphene-FLC (GFLC) system as compared to pure FLC. The presence of multilayer graphene suppresses the ionic impurities, comprised in the FLC material at lower frequencies. The ionic charge annihilation mechanism might be responsible for the reduction of ionic impurities. The presence of graphene reduces the net ferroelectricity and results in a change in the spontaneous polarization of pure FLC. Rotational viscosity of the GFLC system also decreases due to the strong π-π interaction between the FLC molecule and multilayer graphene. The photoluminescence of the GFLC system is blueshifted as compared to pure FLC, which is due to the coupling of energy released in the process of charge annihilation and photon emission.

  14. Electro-optical evaluation of tungsten oxide and vanadium pentoxide thin films for modeling an electrochromic device

    Directory of Open Access Journals (Sweden)

    H Najafi Ashtiani

    2015-01-01

    Full Text Available In this study, tungsten oxide and vanadium oxide electrochromic thin films were placed in vacuum and in a thickness of 200 nm on a transparent conductive substrate of SnO2:F using the physical method of thermal evaporation. Then they were studied for the optical characteristics in the wavelength range from 400 to 700 nm and for their electrical potentials in the range form +1.5 to -1.5 volts. The films were post heated in order to assess changes in energy gap with temperature, at temperatures120 , 300 and 500°C. Refractive and extinction coefficients and the transition type of films in the visible light range and in the thickness of 200 nm were determined and measured. X-ray diffraction pattern and SEM images and cyclic Voltammetry of layers were also studied. The results of this study due to the deposition of layers, the layer thickness selected, the type of substrate, the range of annealing temperatures and selected electrolyte were in full compliance with the works of other researchers [1,2,3]. Therefore, these layers with features such as crystal structure, refractive and even extinction coefficients in the range of visible light, the appropriate response of chromic switch in the replication potential, good adhesion to the substrate, and the high amount of optical transmition and so on, prove useful to be used in an electrochromic device

  15. Electromyographic response of global abdominal stabilizers in response to stable- and unstable-base isometric exercise.

    Science.gov (United States)

    Atkins, Stephen J; Bentley, Ian; Brooks, Darrell; Burrows, Mark P; Hurst, Howard T; Sinclair, Jonathan K

    2015-06-01

    Core stability training traditionally uses stable-base techniques. Less is known as to the use of unstable-base techniques, such as suspension training, to activate core musculature. This study sought to assess the neuromuscular activation of global core stabilizers when using suspension training techniques, compared with more traditional forms of isometric exercise. Eighteen elite level, male youth swimmers (age, 15.5 ± 2.3 years; stature, 163.3 ± 12.7 cm; body mass, 62.2 ± 11.9 kg) participated in this study. Surface electromyography (sEMG) was used to determine the rate of muscle contraction in postural musculature, associated with core stability and torso bracing (rectus abdominus [RA], external obliques [EO], erector spinae [ES]). A maximal voluntary contraction test was used to determine peak amplitude for all muscles. Static bracing of the core was achieved using a modified "plank" position, with and without a Swiss ball, and held for 30 seconds. A mechanically similar "plank" was then held using suspension straps. Analysis of sEMG revealed that suspension produced higher peak amplitude in the RA than using a prone or Swiss ball "plank" (p = 0.04). This difference was not replicated in either the EO or ES musculature. We conclude that suspension training noticeably improves engagement of anterior core musculature when compared with both lateral and posterior muscles. Further research is required to determine how best to activate both posterior and lateral musculature when using all forms of core stability training.

  16. Electro-optic properties of epitaxial Sr0.6Ba0.4Nb2O6 films grown on MgO substrates using LixNi2-xO buffer layer

    Science.gov (United States)

    Li, X. T.; Du, P. Y.; Ye, H.; Mak, C. L.; Wong, K. H.

    2008-08-01

    Textured LixNi2-xO (LNO) thin films have been fabricated on (001)MgO substrates by pulsed laser deposition technique. The as-deposited LNO films shows a conductivity of 2.5×10-3 Ω m and possess a transmittance of about 35% in the visible region. Subsequent deposition of Sr0.6Ba0.4Nb2O6 (SBN60) thin film on these LNO-coated MgO substrates resulted in a textured SBN layer with a orientation perpendicular to the substrate plane. Phi scans on the (221) plane of the SBN layer indicated that the films have two in-plane orientations with respect to the substrate. The SBN unit cells were rotated in the plane of the film by ± 8.2° as well as ± 45° with respect to the LNO/MgO substrate. Besides the highly (00l)-orientation, the SBN films also exhibited a dense microstructure as shown by scanning electron microscopy. The electro-optic coefficient (r33) of the SBN film was measured to be 186 pm/V. On the basis of our results, we have demonstrated that the LNO film can be used as a buffer layer as well as a transparent bottom electrode for waveguide applications. The SBN/LNO heterostructure is also a suitable candidate for integrated electro-optics devices.

  17. Cognitive function in patients with stable coronary heart disease: Related cerebrovascular and cardiovascular responses.

    Directory of Open Access Journals (Sweden)

    Mathieu Gayda

    Full Text Available Chronic exercise has been shown to prevent or slow age-related decline in cognitive functions in otherwise healthy, asymptomatic individuals. We sought to assess cognitive function in a stable coronary heart disease (CHD sample and its relationship to cerebral oxygenation-perfusion, cardiac hemodynamic responses, and [Formula: see text] peak compared to age-matched and young healthy control subjects. Twenty-two young healthy controls (YHC, 20 age-matched old healthy controls (OHC and 25 patients with stable CHD were recruited. Cognitive function assessment included short term-working memory, perceptual abilities, processing speed, cognitive inhibition and flexibility and long-term verbal memory. Maximal cardiopulmonary function (gas exchange analysis, cardiac hemodynamic (impedance cardiography and left frontal cerebral oxygenation-perfusion (near-infra red spectroscopy were measured during and after a maximal incremental ergocycle test. Compared to OHC and CHD, YHC had higher [Formula: see text] peak, maximal cardiac index (CI max, cerebral oxygenation-perfusion (ΔO2 Hb, ΔtHb: exercise and recovery and cognitive function (for all items (P<0.05. Compared to OHC, CHD patients had lower [Formula: see text] peak, CI max, cerebral oxygenation-perfusion (during recovery and short term-working memory, processing speed, cognitive inhibition and flexibility and long-term verbal memory (P<0.05. [Formula: see text] peak and CI max were related to exercise cerebral oxygenation-perfusion and cognitive function (P<0.005. Cerebral oxygenation-perfusion (exercise was related to cognitive function (P<0.005. Stable CHD patients have a worse cognitive function, a similar cerebral oxygenation/perfusion during exercise but reduced one during recovery vs. their aged-matched healthy counterparts. In the all sample, cognitive functions correlated with [Formula: see text] peak, CI max and cerebral oxygenation-perfusion.

  18. Synthesis, structural, electronic and linear electro-optical features of new quaternary Ag{sub 2}Ga{sub 2}SiS{sub 6} compound

    Energy Technology Data Exchange (ETDEWEB)

    Piasecki, M., E-mail: m.piasecki@ajd.czest.pl [Institute of Physics, Jan Dlugosz University, Armii Krajowej 13/15, PL-42-201 Czestochowa (Poland); Myronchuk, G.L. [Department of Solid State Physics, Lesya Ukrainka Eastern European National University, 13 Voli Ave., Lutsk 43025 (Ukraine); Parasyuk, O.V. [Department of Inorganic and Physical Chemistry, Lesya Ukrainka Eastern European National University, 13 Voli Ave., Lutsk 43025 (Ukraine); Khyzhun, O.Y. [Frantsevych Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, 3 Krzhyzhanivsky St., Kyiv 03142 (Ukraine); Fedorchuk, A.O. [Department of Inorganic and Organic Chemistry, Lviv National University of Veterinary Medicine and Biotechnologies, 50 Pekarska Street, Lviv 79010 (Ukraine); Pavlyuk, V.V. [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, 6 Kyryla and Mefodiya St., 79005 Lviv (Ukraine); Institute of Chemistry, Environment Protection and Biotechnology, Jan Dlugosz University, al. Armii Krajowej 13/15, 42-200 Czestochowa (Poland); Kozer, V.R.; Sachanyuk, V.P. [Department of Inorganic and Physical Chemistry, Lesya Ukrainka Eastern European National University, 13 Voli Ave., Lutsk 43025 (Ukraine); El-Naggar, A.M. [Physics Department, Faculty of Science, Ain Shams University, Abassia, Cairo 11566 (Egypt); Research Chair of Exploitation of Renewable Energy Applications in Saudi Arabia, Physics & Astronomy Department, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia); Albassam, A.A. [Research Chair of Exploitation of Renewable Energy Applications in Saudi Arabia, Physics & Astronomy Department, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia); Jedryka, J.; Kityk, I.V. [Faculty of Electrical Engineering, Czestochowa University Technology, Armii Krajowej 17, Czestochowa (Poland)

    2017-02-15

    For the first time phase equilibria and phase diagram of the AgGaS{sub 2}–SiS{sub 2} system were successfully explored by differential thermal and X-ray phase analysis methods. Crystal structure of low-temperature (LT) modification of Ag{sub 2}Ga{sub 2}SiS{sub 6} (LРў- Ag{sub 2}Ga{sub 2}SiS{sub 6}) was studied by X-ray powder method and it belongs to tetragonal space group I-42d, with unit cell parameters a=5.7164(4) Å, c=9.8023(7) Å, V=320.32(7) Å{sup 3}. Additional details regarding the crystal structure exploration are available at the web page Fachinformationszentrum Karlsruhe. X-ray photoelectron core-level and valence-band spectra were measured for pristine LРў- Ag{sub 2}Ga{sub 2}SiS{sub 6} crystal surface. In addition, the X-ray photoelectron valence-band spectrum of LРў-Ag{sub 2}Ga{sub 2}SiS{sub 6} was matched on a common energy scale with the X-ray emission S Kβ{sub 1,3} and Ga Kβ{sub 2} bands, which give information on the energy distribution of the S 3p and Ga 4p states, respectively. The presented X-ray spectroscopy results indicate that the valence S p and Ga p atomic states contribute mainly to the upper and central parts of the valence band of LРў-Ag{sub 2}Ga{sub 2}SiS{sub 6}, respectively, with a less significant contribution also to other valence-band regions. Band gap energy was estimated by measuring the quantum energy in the spectral range of the fundamental absorption. We have found that energy gap Eg is equal to 2.35 eV at 300 K. LT-Ag{sub 2}Ga{sub 2}SiS{sub 6} is a photosensitive material and reveals two spectral maxima on the curve of spectral photoconductivity spectra at λ{sub max1} =590 nm and λ{sub max2} =860 nm. Additionally, linear electro-optical effect of LT-Ag{sub 2}Ga{sub 2}SiS{sub 6} for the wavelengths of a cw He-Ne laser at 1150 nm was explored. - Graphical abstract: Manuscript present the technology of growth and investigation of properties a new quaternary compound Ag{sub 2}Ga{sub 2}SiS{sub 6

  19. Interpreting tree responses to thinning and fertilization using tree-ring stable isotopes.

    Science.gov (United States)

    Brooks, J Renée; Mitchell, Alan K

    2011-05-01

    • Carbon sequestration has focused renewed interest in understanding how forest management affects forest carbon gain over timescales of decades, and yet details of the physiological mechanisms over decades are often lacking for understanding long-term growth responses to management. • Here, we examined tree-ring growth patterns and stable isotopes of cellulose (δ(13)C(cell) and δ(18)O(cell)) in a thinning and fertilization controlled experiment where growth increased substantially in response to treatments to elucidate physiological data and to test the dual isotope approach for uses in other locations. • δ(13)C(cell) and δ(18)O(cell) results indicated that fertilization caused an increase in intrinsic water-use efficiency through increases in photosynthesis (A) for the first 3 yr. The combination treatment caused a much larger increase in A and water-use efficiency. Only the thinning treatments showed consistent significant increases in δ(18)O(cell) above controls. Changes in canopy microclimate are the likely drivers for δ(18)O(cell) increases with decreases in relative humidity and increases in leaf temperature associated with thinning being the most probable causes. • Tree-ring isotopic records, particularly δ(13)C(cell), remain a viable way to reconstruct long-term physiological mechanisms affecting tree carbon gain in response to management and climate fluctuations. No claim to original US government works. New Phytologist © 2011 New Phytologist Trust.

  20. Male stable fly (Stomoxys calcitrans) response to CO2 changes with age: evidence from wind tunnel experiments and field collections.

    Science.gov (United States)

    Beresford, D V; Sutcliffe, J F

    2008-12-01

    Male stable flies require at least one or more blood meals to reach sexual maturity and are often caught in CO2-baited traps. We tested the hypothesis that young male stable flies (one to three days, one blood feeding session) would be more responsive to CO2 bait than older male stable flies by monitoring the upwind movement of different-aged male stable flies exposed to CO2 using a wind tunnel. The proportion of males moving upwind toward CO2 decreased with age (days), from 49% for males 3 days old. To further test this, we conducted daily sampling of stable fly populations at a beef farm using a CO2-baited cloth trap. We found that days on which a high proportion of males were caught, females were predominantly from early developmental stages, indicating that proportionately more males were caught from field populations made up of younger cohorts. These results were consistent with the wind tunnel experiment patterns.

  1. Dietary response of sympatric deer to fire using stable isotope analysis of liver tissue

    Science.gov (United States)

    Walter, W. David; Zimmerman, T.J.; Leslie, David M.; Jenks, J.A.

    2009-01-01

    Carbon (??13C) and nitrogen (??15N) isotopes in biological samples from large herbivores identify photosynthetic pathways (C3 vs. C4) of plants they consumed and can elucidate potential nutritional characteristics of dietary selection. Because large herbivores consume a diversity of forage types, ??13C and ??15N in their tissue can index ingested and assimilated diets through time. We assessed ??13C and ??15N in metabolically active liver tissue of sympatric mule deer (Odocoileus hemionus) and white-tailed deer (O. virginianus) to identify dietary disparity resulting from use of burned and unburned areas in a largely forested landscape. Interspecific variation in dietary disparity of deer was documented 2-3 years post-fire in response to lag-time effects of vegetative response to burning and seasonal (i.e., summer, winter) differences in forage type. Liver ??13C for mule deer were lower during winter and higher during summer 2 years post-fire on burned habitat compared to unburned habitat suggesting different forages were consumed by mule deer in response to fire. Liver ??15N for both species were higher on burned than unburned habitat during winter and summer suggesting deer consumed more nutritious forage on burned habitat during both seasons 2 and 3 years post-fire. Unlike traditional methods of dietary assessment that do not measure uptake of carbon and nitrogen from dietary components, analyses of stable isotopes in liver or similar tissue elucidated ??13C and ??15N assimilation from seasonal dietary components and resulting differences in the foraging ecology of sympatric species in response to fire.

  2. Intramolecular stable isotope distributions detect plant metabolic responses on century time scales

    Science.gov (United States)

    Schleucher, Jürgen; Ehlers, Ina; Augusti, Angela; Betson, Tatiana

    2014-05-01

    Plants respond to environmental changes on a vast range of time scales, and plant gas exchanges constitute important feedback mechanisms in the global C cycle. Responses on time scales of decades to centuries are most important for climate models, for prediction of crop productivity, and for adaptation to climate change. Unfortunately, responses on these timescale are least understood. We argue that the knowledge gap on intermediate time scales is due to a lack of adequate methods that can bridge between short-term manipulative experiments (e.g. FACE) and paleo research. Manipulative experiments in plant ecophysiology give information on metabolism on time scales up to years. However, this information cannot be linked to results from retrospective studies in paleo research, because little metabolic information can be derived from paleo archives. Stable isotopes are prominent tools in plant ecophysiology, biogeochemistry and in paleo research, but in all applications to date, isotope ratios of whole molecules are measured. However, it is well established that stable isotope abundance varies among intramolecular groups of biochemical metabolites, that is each so-called "isotopomer" has a distinct abundance. This intramolecular variation carries information on metabolic regulation, which can even be traced to individual enzymes (Schleucher et al., Plant, Cell Environ 1999). Here, we apply intramolecular isotope distributions to study the metabolic response of plants to increasing atmospheric [CO2] during the past century. Greenhouse experiments show that the deuterium abundance among the two positions in the C6H2 group of photosynthetic glucose depends on [CO2] during growth. This is observed for all plants using C3 photosynthesis, and reflects the metabolic flux ratio between photorespiration and photosynthesis. Photorespiration is a major C flux that limits assimilation in C3 plants, which encompass the overwhelming fraction of terrestrial photosynthesis and the

  3. Responses of horses offered a choice between stables containing single or multiple forages.

    Science.gov (United States)

    Goodwin, D; Davidson, H P B; Harris, P

    2007-04-21

    To investigate the choices of foraging location of horses, 10 to 12 horses were introduced for five minutes into each of two similar stables containing a single forage or six forages, in four replicated trials. The horses were then removed and released into the gangway between the stables, and allowed five minutes to choose between the stables. Their initial and final choices, mean duration in each stable and proportional frequency of change of location were compared. Most of the horses initially entered the closest stable on release (Pforages (Pforages in multiple locations (Pforage was available in both stables, possibly indicating a motivation to move between foraging locations regardless of the palatability of the forages offered or the horses' preference for a forage.

  4. Thermomechanical responses of nonlinear torsional vibration with NiTi shape memory alloy - Alternative stable states and their jumps

    Science.gov (United States)

    Xia, Minglu; Sun, Qingping

    2017-05-01

    The dynamic response of nonlinear torsional vibration system with phase transformable NiTi Shape Memory Alloy (SMA) wire is investigated by experiment in this paper. The thermomechanical responses of the NiTi wire as a softening nonlinear damping spring in the torsional vibration system are measured by synchronized acquisition of rotational angle and temperature under external excitation. Frequency Response Curves (FRCs) at fixed excitation amplitude and Amplitude Response Curves (ARCs) at fixed frequency are obtained in the frequency and amplitude domains respectively. It is found that, as the deformation of NiTi wire goes into the softening nonlinear phase transition region, the smooth and stable dynamic responses along one branch of FRC or ARC will gradually enter into metastable region and eventually become unstable and drastically switch to a new contrasting alternative stable state along the other branch. The jump phenomenon between the alternative stable states on the lower and upper branches of the FRC or ARC and the hysteresis between the jump-up and jump-down are identified by experiments. In addition, the effects of external disturbance (both magnitude and direction) on triggering the jumps between the alternative stable states along the two metastable branches are examined in the time domain. The stability of the nonlinear dynamic response is analyzed by the Duffing oscillator model and interpreted via the stability landscape. For the first time, we directly reveal the alternative stable states and jump phenomena of thermomechanical responses by experiments in the frequency, amplitude and time domains. The results not only show the important roles of phase transition nonlinearity in bringing multiple equilibrium states and their fast switches, but also provide a solid experimental base for the identification of metastable regions as well as further management of the undesired dynamic responses of vibration system where NiTi is used as a nonlinear

  5. Lignocellulose-responsive bacteria in a southern California salt marsh identified by stable isotope probing

    Directory of Open Access Journals (Sweden)

    Lindsay eDarjany

    2014-06-01

    Full Text Available Carbon cycling by microbes has been recognized as the main mechanism of organic matter decomposition and export in coastal wetlands, yet very little is known about the functional diversity of specific groups of decomposers (e.g., bacteria in salt marsh benthic trophic structure. Indeed, salt marsh sediment bacteria remain largely in a black box in terms of their diversity and functional roles within salt marsh benthic food web pathways. We used DNA stable isotope probing (SIP utilizing 13C-labeled lignocellulose as a proxy to evaluate the fate of macrophyte-derived carbon in benthic salt marsh bacterial communities. Overall, 146 bacterial species were detected using SIP, of which only 12 lineages were shared between enriched and non-enriched communities. Abundant groups from the 13C-labeled community included Desulfosarcina, Spirochaeta, and Kangiella. This study is the first to use heavy-labeled lignocellulose to identify bacteria responsible for macrophyte carbon utilization in salt marsh sediments and will allow future studies to target specific lineages to elucidate their role in salt marsh carbon cycling and ultimately aid our understanding of the potential of salt marshes to store carbon.

  6. An improved Armstrong-Frederick-Type Plasticity Model for Stable Cyclic Stress-Strain Responses Considering Nonproportional Hardening

    Science.gov (United States)

    Li, Jing; Zhang, Zhong-ping; Li, Chun-wang

    2018-03-01

    This paper modified an Armstrong-Frederick-type plasticity model for investigating the stable cyclic deformation behavior of metallic materials with different sensitivity to nonproportional loadings. In the modified model, the nonproportionality factor and nonproportional cyclic hardening coefficient coupled with the Jiang-Sehitoglu incremental plasticity model were used to estimate the stable stress-strain responses of the two materials (1045HR steel and 304 stainless steel) under various tension-torsion strain paths. A new equation was proposed to calculate the nonproportionality factor on the basis of the minimum normal strain range. Procedures to determine the minimum normal strain range were presented for general multiaxial loadings. Then, the modified model requires only the cyclic strain hardening exponent and cyclic strength coefficient to determine the material constants. It is convenient for predicting the stable stress-strain responses of materials in engineering application. Comparisons showed that the modified model can reflect the effect of nonproportional cyclic hardening well.

  7. Evaluation of treatment response to autologous transplantation of noncultured melanocyte/keratinocyte cell suspension in patients with stable vitiligo.

    Science.gov (United States)

    Ramos, Mariana Gontijo; Ramos, Daniel Gontijo; Ramos, Camila Gontijo

    2017-01-01

    Vitiligo is a chronic disease characterized by the appearance of achromic macules caused by melanocyte destruction. Surgical treatments with melanocyte transplantation can be used for stable vitiligo cases. To evaluate treatment response to the autologous transplantation of noncultured epidermal cell suspension in patients with stable vitiligo. Case series study in patients with stable vitiligo submitted to noncultured epidermal cell suspension transplantation and evaluated at least once, between 3 and 6 months after the procedure, to observe repigmentation and possible adverse effects. The maximum follow-up period for some patients was 24 months. Of the 20 patients who underwent 24 procedures, 25% showed an excellent rate of repigmentation, 50% good repigmentation, 15% regular, and 10% poor response. The best results were observed in face and neck lesions, while the worst in extremity lesions (88% and 33% of satisfactory responses, respectively). Patients with segmental vitiligo had a better response (84%) compared to non-segmental ones (63%). As side effects were observed hyperpigmentation of the treated area and the appearance of Koebner phenomenon in the donor area. Some limitations of the study included the small number of patients, a subjective evaluation, and the lack of long-term follow-up on the results. CONCLUSION: Noncultured epidermal cell suspension transplantation is efficient and well tolerated for stable vitiligo treatment, especially for segmental vitiligo on the face and neck.

  8. Behavioural and electroantennogram responses of the stable fly (Stomoxys calcitrans L.) to plant essential oils and their mixtures with attractants.

    Science.gov (United States)

    Hieu, Trung Tran; Jung, JeWon; Kim, Soon-Il; Ahn, Young-Joon; Kwon, Hyung Wook

    2014-01-01

    Insect olfactory organs possess many olfactory receptor neurons, which detect many different sets of odorants in nature. In order to feed on blood meals, stable flies locate host animals and humans using chemical cues such as 1-octen-3-ol and butyric acid. In the present study, behavioural and electroantennogram (EAG) response patterns to repellent volatiles from essential oils (EOs) of Zanthoxylum piperitum and Z. armatum in combination with the attractants were investigated. Components of the EOs such as cuminaldehyde, citronellal, neral, linalool, linalool oxide, terpinen-4-ol, 1,8-cineole, and piperitone induced remarkable repellent behaviours in the stable fly. EAG responses in the fly antenna to these chemicals showed a dose-dependent manner. The patterns of behavioural and EAG responses were significantly altered depending on the ratios of 1-octen-3-ol or butyric acid to the EOs or compounds in the air mixtures. The present study demonstrated that the Zanthoxylum EOs decreased the levels of response of flight behaviours of the stable fly towards host volatile compounds. The combinations of odorant mixtures of the attractants with the EOs and their components affect the representation of behavioural and EAG responses of the flies. The summation and integration patterns of olfactory responses measured by the EAG indicated that the peripheral olfactory networks in antennae could process the odorant complexity of different odorant mixtures between attractants and repellents. © 2013 Society of Chemical Industry.

  9. Stable Isotope Techniques for the Assessment of Host and Microbiota Response During Gastrointestinal Dysfunction

    Science.gov (United States)

    Butler, Ross N.; Kosek, Margaret; Krebs, Nancy F.; Loechl, Cornelia U.; Loy, Alexander; Owino, Victor O.; Zimmermann, Michael B.; Morrison, Douglas J.

    2016-01-01

    The International Atomic Energy Agency convened a technical meeting on environmental enteric dysfunction (EED) in Vienna (28th – 30th October 2015; https://nucleus.iaea.org/HHW/Nutrition/EED_Technical_Meeting/index.html) to bring together international experts in the fields of EED, nutrition and stable isotope technologies. Advances in stable isotope labelling techniques open up new possibilities to improve our understanding of gastrointestinal dysfunction and the role of the microbiota in host health. In the context of EED, little is known about the role gut dysfunction may play in macro- and micronutrient bioavailability and requirements and what the consequences may be for nutritional status and linear growth. Stable isotope labelling techniques have been used to assess intestinal mucosal injury and barrier function, carbohydrate digestion and fermentation, protein derived amino acid bioavailability and requirements, micronutrient bioavailability and to track microbe-microbe and microbe-host interactions at the single cell level. The non-invasive nature of stable isotope technologies potentially allows for low-hazard, field deployable tests of gut dysfunction that are applicable across all age-groups. The purpose of this review is to assess the state-of-the-art in the use of stable isotope technologies and to provide a perspective on where these technologies can be exploited to further our understanding of gut dysfunction in EED. PMID:27632432

  10. Stable fly (Stomoxys calcitrans: Diptera, Muscidae) trap response to changes in effective trap height caused by growing vegetation.

    Science.gov (United States)

    Beresford, D V; Sutcliffe, J F

    2008-06-01

    Stable flies (Stomoxys calcitrans L.) are blood-feeding pests of cattle, whose populations are often monitored using sticky traps. Trap responses at different heights were compared with: 1) a choice and no-choice test, with sticky cards set at 30 and 121 cm heights (above ground), and 2) tall (120 cm) traps placed in short (3 cm) and tall (40 cm) grass to assess how vegetation height affects trap catches. In the first experiment, the percentage of upper to lower trap catches were similar at choice (16%) and no-choice traps (15%). In the vegetation study, stable fly catch height data were fitted to gamma distributions to determine the most productive trap heights; 20 cm above short grass and 24 cm above tall grass (from lower edge of trap). The results indicate that traps used to monitor stable fly populations should be maintained at a constant distance above surrounding vegetation rather than ground surface, otherwise trap data can be misleading.

  11. An immunoglobulin binding protein (antigen 5) of the stable fly (Diptera: Muscidae) salivary gland stimulates bovine immune responses.

    Science.gov (United States)

    Ameri, M; Wang, X; Wilkerson, M J; Kanost, M R; Broce, A B

    2008-01-01

    The stable fly, Stomoxys calcitrans (L.) (Diptera: Muscidae), is an economically important pest of livestock. Previous studies demonstrated lymphocyte suppression by crude salivary gland extract (SGE) of the stable fly. A dominant 27-kDa protein identified in the SGE was reported to stimulate immunodominant antibody responses in exposed cattle. The purpose of this study was to determine whether this protein, now identified as ahomolog of insect proteins named antigen 5 (Ag5), was responsible for the lymphocyte suppression and whether naive calves can mount an immune response to it. Calves raised in the winter were immunized with recombinant Ag5 (rAg5) expressed in Drosophila S2 cells or with "natural" Ag5 protein isolated by preparative gel electrophoresis of SGE. Control calves were immunized with adjuvant alone. Rising antibody concentrations to rAg5 were detected in two of three calves immunized with rAg5 and one of three calves immunized with natural Ag5. Recall lymphocyte responses to rAg5 were detected at 21 and 28 d postimmunization in calves immunized with rAg5 but not in calves immunized with the natural Ag5 or those exposed to adjuvant alone. Mitogen-stimulated bovine lymphocyte responses were not suppressed by rAg5. Further investigation using immunoblotting revealed that rAg5 binds to the Fc and F (ab')2 portions of bovine IgG, but not to an Fab fragment. These findings suggest that Ag5 of the stable fly salivary gland is not immunosuppressive but that it has immunoglobulin binding properties and can invoke specific antibody and memory lymphocyte responses in immunized calves.

  12. Lignocellulose-responsive bacteria in a southern California salt marsh identified by stable isotope probing

    OpenAIRE

    Darjany, Lindsay E.; Whitcraft, Christine R.; Dillon, Jesse G.

    2014-01-01

    Carbon cycling by microbes has been recognized as the main mechanism of organic matter decomposition and export in coastal wetlands, yet very little is known about the functional diversity of specific groups of decomposers (e.g., bacteria) in salt marsh benthic trophic structure. Indeed, salt marsh sediment bacteria remain largely in a black box in terms of their diversity and functional roles within salt marsh benthic food web pathways. We used DNA stable isotope probing (SIP) utilizing 13C-...

  13. Identification of stable housekeeping genes in response to ionizing radiation in cancer research

    Science.gov (United States)

    Iyer, Gopal; Wang, Albert R.; Brennan, Sean R.; Bourgeois, Shay; Armstrong, Eric; Shah, Pari; Harari, Paul M.

    2017-01-01

    Housekeeping genes (HKGs) are essential for basic maintenance of a variety of cellular processes. They ideally maintain uniform expression independent of experimental conditions. However, the effects of ionizing radiation (IR) on HKG expression is unclear. Statistical algorithms, geNorm and Normfinder were used for estimating the stability of HKGs as raw quantification cycle (Cq) values were not a reliable factor for normalization. Head and neck, non-small lung and pancreas cells were exposed to 2, 4 and 6 Gy IR doses and expression of fourteen HKGs was measured at 5 min to 48 h post-irradiation within a given tissue. Paired and single cell line analyses under these experimental conditions identified TATA-Box Binding Protein (TBP) and Importin 8 (IPO8) to be stable in non-small cell lung cancer. In addition to these two genes, Ubiquitin C (UBC) in head and neck cancer and Transferrin receptor (TFRC) and β-Glucuronidase (GUSB) in pancreatic cancer were identified to be stable as well. In summary we present a resource for top ranked five stable HKGs and their transcriptional behavior in commonly used cancer model cell lines and suggest the use of multiple HKGs under radiation treatment conditions is a reliable metric for quantifying gene expression. PMID:28262749

  14. Behavioural responses of dairy cattle to the stable fly, Stomoxys calcitrans, in an open field environment.

    Science.gov (United States)

    Mullens, B A; Lii, K-S; Mao, Y; Meyer, J A; Peterson, N G; Szijj, C E

    2006-03-01

    Individual cows (25 in each of four herds) were monitored 8-10 times weekly for 12 weeks (stable fly season) on a southern California dairy, with 100 observations per cow. The numbers of biting stable flies, Stomoxys calcitrans (L.) (Diptera: Muscidae) on the front legs and the frequencies of four fly-repelling behaviours per 2-min observation period [head throws, front leg stamps, skin twitches (panniculus reflex) and tail flicks] were recorded. Fly numbers varied, peaking at 3.0-3.5 flies per leg in week 9 (late May). Weekly herd mean frequencies of fly-repelling behaviours were highly dependent on fly numbers, with a linear regression r(2) > 0.8. Head throws and stamps were less frequent than skin twitches and tail flicks. Individual cows differed in numbers of stable flies and behaviours. Behaviours were correlated with flies for individual cows, but at a lower level than were herd means (r = 0.3-0.7). Cows that stamped more within a herd tended to have lower fly counts; other fly-repelling behaviours were less effective. Cows maintained ranks within a herd with regard to fly numbers (r = 0.47), head throws (0.48), leg stamps (0.64), skin twitches (0.69) and tail flicks (0.64). Older cows tended to harbour higher fly numbers and to stamp less relative to younger adult cows. Ratios of leg stamps and head throws to fly numbers dropped significantly through time, suggesting habituation to pain associated with fly biting. Tail flicks were not effective for repelling Stomoxys, but were easiest to quantify and may help in monitoring pest intensity. At this low-moderate fly pressure, no consistent impacts on milk yield were detected, but methods incorporating cow behaviour are recommended for future studies of economic impact.

  15. Degradation of Methyl Bromide and Methyl Chloride in Soil Microcosms: Use of Stable C Isotope Fractionation and Stable Isotope Probing to Identify Reactions and the Responsible Microorganisms

    Science.gov (United States)

    Miller, L. G.; Warner, K. L.; Baesman, S. M.; Oremland, R. S.; McDonald, I. R.; Radajewski, S.; Murrell, J. C.

    2003-12-01

    Methyl bromide (MeBr) and methyl chloride (MeCl) are important atmospheric trace gases that contribute directly to stratospheric ozone depletion. These compounds have natural and anthropogenic sources and sinks in both aquatic and terrestrial environments. Soils comprise the largest known sink for MeBr on the Earth's surface and are also a large sink for MeCl. However, the processes that influence the flux of these compounds from air to soil or soil to air are poorly understood at present. Bacteria in soil microcosm experiments oxidized both MeCl and MeBr, the former compound more rapidly than the latter. MeBr was also removed by chemical reactions while MeCl was not. Chemical degradation of MeBr accounted for more than half of its total loss. We applied new techniques to determine if different bacteria were responsible for degrading MeBr and MeCl. Stable isotope probing revealed that different populations of soil bacteria assimilated added 13C-labeled MeBr and MeCl. Soil bacterial oxidation of MeBr and MeCl was characterized by different kinetic isotope effects (KIEs). The KIE for MeBr oxidation by bacteria was 22 +/- 5 \\permil and the KIE for MeCl oxidation was 56 +/- 3 \\permil, suggesting that different bacteria were responsible for degrading each compound. The identity of the active MeBr and MeCl degrading bacteria in soil was determined by analysis of 16S rDNA sequences amplified from 13C-DNA fractions. The diverse population of active bacteria was reflected by the range of sequences found for the cmuA gene, which codes for the enzyme that catalyzes the initial step in the oxidation of MeBr and MeCl. The diversity and number of different bacteria actively degrading MeBr and MeCl in the soil and the number of bacteria identified that contain the enzyme capable of degrading methyl halides were in contrast to the limited number of methyl halide degrading bacteria that have been isolated thus far from soil and aquatic environments; thus suggesting that the

  16. How stable is repression of disallowed genes in pancreatic islets in response to metabolic stress?

    Science.gov (United States)

    Lemaire, Katleen; Granvik, Mikaela; Schraenen, Anica; Goyvaerts, Lotte; Van Lommel, Leentje; Gómez-Ruiz, Ana; In 't Veld, Peter; Gilon, Patrick; Schuit, Frans

    2017-01-01

    The specific phenotype of mature differentiated beta cells not only depends on the specific presence of genes that allow beta cell function but also on the selective absence of housekeeping genes ("disallowed genes") that would interfere with this function. Recent studies have shown that both histone modifications and DNA methylation via the de novo methyltransferase DNMT3A are involved in repression of disallowed genes in neonatal beta cells when these cells acquire their mature phenotype. It is unknown, however, if the environmental influence of advanced age, pregnancy and the metabolic stress of high fat diet or diabetes could alter the repression of disallowed genes in beta cells. In the present study, we show that islet disallowed genes-which are also deeply repressed in FACS-purified beta cells-remain deeply repressed in animals of advanced age and in pregnant females. Moreover, the stability of this repression was correlated with strong and stable histone repression marks that persisted in islets isolated from 2 year old mice and with overall high expression of Dnmt3a in islets. Furthermore, repression of disallowed genes was unaffected by the metabolic stress of high fat diet. However, repression of about half of the disallowed genes was weakened in 16 week-old diabetic db/db mice. In conclusion, we show that the disallowed status of islet genes is stable under physiological challenging conditions (advanced age, pregnancy, high fat diet) but partially lost in islets from diabetic animals.

  17. Sex Differences in Platelet Reactivity and Cardiovascular and Psychological Response to Mental Stress in Patients With Stable Ischemic Heart Disease

    Science.gov (United States)

    Samad, Zainab; Boyle, Stephen; Ersboll, Mads; Vora, Amit N.; Zhang, Ye; Becker, Richard C.; Williams, Redford; Kuhn, Cynthia; Ortel, Thomas L.; Rogers, Joseph G.; O’Connor, Christopher; Velazquez, Eric J.; Jiang, Wei

    2016-01-01

    BACKGROUND Although emotional stress is associated with ischemic heart disease (IHD) and related clinical events, sex-specific differences in the psychobiological response to mental stress have not been clearly identified. OBJECTIVES We aimed to study the differential psychological and cardiovascular responses to mental stress between male and female patients with stable IHD. METHODS Patients with stable IHD enrolled in the REMIT (Responses of Mental Stress–Induced Myocardial Ischemia to Escitalopram) study underwent psychometric assessments, transthoracic echocardiography, and platelet aggregation studies at baseline and after 3 mental stress tasks. Mental stress–induced myocardial ischemia (MSIMI) was defined as the development or worsening of regional wall motion abnormality, reduction of left ventricular ejection fraction (LVEF) ≥8% by transthoracic echocardiography, and/or ischemic ST-segment change on electrocardiogram during 1 or more of the 3 mental stress tasks. RESULTS In the 310 participants with known IHD (18% women, 82% men), most baseline characteristics were similar between women and men (including heart rate, blood pressure, and LVEF), although women were more likely to be nonwhite, living alone (p < 0.001), and unmarried (p < 0.001); they also had higher baseline depression and anxiety (p < 0.05). At rest, women had heightened platelet aggregation responses to serotonin (p = 0.007) and epinephrine (p = 0.004) compared with men. Following mental stress, women had more MSIMI (57% vs. 41%, p < 0.04), expressed more negative (p = 0.02) and less positive emotion (p < 0.001), and demonstrated higher collagen-stimulated platelet aggregation responses (p = 0.04) than men. Men were more likely than women to show changes in traditional physiological measures, such as blood pressure (p < 0.05) and double product. CONCLUSIONS In this exploratory analysis, we identified clear, measurable, and differential responses to mental stress in women and men

  18. Lipoxin A4 stable analogs reduce allergic airway responses via mechanisms distinct from CysLT1 receptor antagonism.

    Science.gov (United States)

    Levy, Bruce D; Lukacs, Nicholas W; Berlin, Aaron A; Schmidt, Birgitta; Guilford, William J; Serhan, Charles N; Parkinson, John F

    2007-12-01

    Cellular recruitment during inflammatory/immune responses is tightly regulated. The ability to dampen inflammation is imperative for prevention of chronic immune responses, as in asthma. Here we investigated the ability of lipoxin A4 (LXA4) stable analogs to regulate airway responses in two allergen-driven models of inflammation. A 15-epi-LXA4 analog (ATLa) and a 3-oxa-15-epi-LXA4 analog (ZK-994) prevented excessive eosinophil and T lymphocyte accumulation and activation after mice were sensitized and aerosol-challenged with ovalbumin. At 50% and to a greater extent than equivalent doses of the CysLT1 receptor antagonist montelukast. Distinct from montelukast, ATLa treatment led to marked reductions in cysteinyl leukotrienes, interleukin-4 (IL-4), and IL-10, and both ATLa and ZK-994 inhibited levels of IL-13. In cockroach allergen-induced airway responses, both intraperitoneal and oral administration of ZK-994 significantly reduced parameters of airway inflammation and hyper-responsiveness in a dose-dependent manner. ZK-994 also significantly changed the balance of Th1/Th2-specific cytokine levels. Thus, the ATLa/LXA4 analog actions are distinct from CysLT1 antagonism and potently block both allergic airway inflammation and hyper-reactivity. Moreover, these results demonstrate these analogs' therapeutic potential as new agonists for the resolution of inflammation.

  19. The structural, electro-optical, charge transport and nonlinear optical properties of oxazole (4Z-4-Benzylidene-2-(4-methylphenyl-1,3-oxazol-5(4H-one derivative

    Directory of Open Access Journals (Sweden)

    Ahmad Irfan

    2018-01-01

    Full Text Available The oxazole compounds are being used for multifunctional purposes ranging from organic light emitting diodes, organic thin film transistors, and photovoltaic to the nonlinear optical materials. In this study, several structural, electro-optical, charge transport and nonlinear optical properties of (4Z-4-Benzylidene-2-(4-methylphenyl-1,3-oxazol-5(4H-one (BMPO have been investigated. Density functional theory (DFT and time dependent DFT are very accurate and reasonable approaches to optimize the ground and excited state geometries, respectively. Thus, in the present study DFT and TDDFT methods with the B3LYP/6-31G∗∗ levels of theory have been applied to shed some light on the structure-property relationship, frontier molecular orbitals (FMOs, optical properties. A clear intra-molecular charge transfer (ICT from the highest occupied molecular orbitals (HOMOs to the lowest unoccupied molecular orbitals (LUMOs has been observed. The ionization potentials (IP, electron affinities (EA, total and partial densities of states have been discussed intensively. The electron reorganization energy of oxazole compound (BMPO is smaller than the hole reorganization energy revealing that it might be good electron transport contender in OLED. The electron reorganization energy of BMPO is calculated to be 0.223 eV that is smaller than the perfluoropentacene (value is 0.250 eV, which is famous n-type semiconductor material. The first pathway of BMPO has almost comparable hole and electron transfer integral values whereas the calculated electron reorganization energy (0.223 eV is considerably lower than the hole reorganization energy (0.381 eV which leads to superior electron intrinsic mobility of the studied oxazole derivative as compared to the hole one. It is expected that BMPO might be excellent electron transport material.

  20. InP/ZnS quantum-dot-dispersed nematic liquid crystal illustrating characteristic birefringence and enhanced electro-optical parameters

    Science.gov (United States)

    Roy, Aradhana; Pathak, Govind; Herman, Jakub; Inamdar, Sanjeev R.; Srivastava, Atul; Manohar, Rajiv

    2018-03-01

    The present study investigates the influence of InP/ZnS core/shell QDs on various parameters of Nematic LC sample 1832A, based on 4-(4-alkyl-cyclohexyl)benzene isothiocyanates and 4-(4-alkyl-cyclohexyl)biphenyl isothiocyanates. Observations recorded consist of distinguished functioning of birefringence phenomenon along with characteristic response time measurement. Further study of rotational viscosity and splay elastic constant portrays stupendous behavior strengthening the appositeness of the composites for low-charge consumable devices. The addition of 0.2 ml of core/shell QDs producing more than two times faster response and enhanced birefringence at low-temperature range can be employed in development of thermostable photonic devices. In addition, dielectric properties comprising of relative permittivity and conductivity have been reported supporting the outcome of the investigation in applicative LC-based technologies.

  1. Stable isotope fractionation in response to variable fluid residence time distributions

    Science.gov (United States)

    Druhan, J. L.; Maher, K.

    2013-12-01

    Hydrogeochemical processes governing groundwater quantity and quality are often inferred from fluid samples that are the flux-weighted average of a heterogeneous system. This connection has been demonstrated for solutes subject to transport and equilibrium constraints, in which the steady state concentration - discharge relationship is cast in terms of the choice of expression for residence time distribution (Maher, 2011). Here, we examine the extent to which the spatial correlation of the permeability field, which governs the fluid residence time distribution, exerts a principle control on the partitioning of stable isotopes between reactant and product species during heterogeneous reactions in groundwater systems. We demonstrate this relationship using numerical simulations of δ53Cr fractionation due to abiotic CrO42- reduction by Fe2+, implemented in the reactive transport code CrunchFlow. The chemically homogeneous redox reaction generates Cr3+ with an isotope ratio distinct from the reactant pool, and in turn this product species precipitates as a mineral phase Cr(OH)3(s) through a non-fractionating reaction. The corresponding chromate δ53Cr enrichment across a homogeneous domain varies from a maximum value set by the kinetic fractionation factor (αk) at high mean fluid residence times, to a value reaction-limited to transport-limited regimes. For physically heterogeneous flow fields, the transition in isotopic fractionation from a reaction-limited to a transport-limited regime becomes variable, and falls between the upper and lower bounds set by the homogeneous simulations at slow and fast precipitation rates, respectively. Our results show that while minimal variation occurs in the steady-state isotopic profile of the reactant species (δ53Cr of CrO42-), the combined effects of the precipitation rate and the heterogeneous structure of the porous media lead to a wide range in the steady state isotopic composition of the product species (δ53Cr of Cr3

  2. Response of stable carbon isotope in epilithic mosses to atmospheric nitrogen deposition

    Energy Technology Data Exchange (ETDEWEB)

    Liu Xueyan, E-mail: liuxueyan@vip.skleg.c [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China); Xiao Huayun; Liu Congqiang [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China); Li Youyi; Xiao Hongwei; Wang Yanli [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China); Graduate University of Chinese Academy of Sciences, Yuquanlu, Beijing 100049 (China)

    2010-06-15

    Epilithic mosses are characterized by insulation from substratum N and hence meet their N demand only by deposited N. This study investigated tissue C, total Chl and delta{sup 13}C of epilithic mosses along 2 transects across Guiyang urban (SW China), aiming at testing their responses to N deposition. Tissue C and total Chl decreased from the urban to rural, but delta{sup 13}C{sub moss} became less negative. With measurements of atmospheric CO{sub 2} and delta{sup 13}CO{sub 2}, elevated N deposition was inferred as a primary factor for changes in moss C and isotopic signatures. Correlations between total Chl, tissue C and N signals indicated a nutritional effect on C fixation of epilithic mosses, but the response of delta{sup 13}C{sub moss} to N deposition could not be clearly differentiated from effects of other factors. Collective evidences suggest that C signals of epilithic mosses are useful proxies for N deposition but further works on physiological mechanisms are still needed. - Photosynthetic {sup 13}C discrimination of bryophytes might increase with elevated N deposition.

  3. Carbon Availability Modifies Temperature Responses of Heterotrophic Microbial Respiration, Carbon Uptake Affinity, and Stable Carbon Isotope Discrimination.

    Science.gov (United States)

    Min, Kyungjin; Lehmeier, Christoph A; Iv, Ford Ballantyne; Billings, Sharon A

    2016-01-01

    Microbial transformations of organic carbon (OC) generate a large flux of CO 2 into the atmosphere and influence the C balance of terrestrial and aquatic ecosystems. Yet, inherent heterogeneity in natural environments precludes direct quantification of multiple microbial C fluxes that underlie CO 2 production. Here we used a continuous flow bioreactor coupled with a stable C isotope analyzer to determine the effects of temperature and C availability (cellobiose concentration) on C fluxes and 13 C discrimination of a microbial population growing at steady-state in a homogeneous, well-mixed environment. We estimated C uptake affinity and C use efficiency (CUE) to characterize the physiological responses of microbes to changing environmental conditions. Temperature increased biomass-C specific respiration rate and C uptake affinity at lower C availability, but did not influence those parameters at higher C availability. CUE decreased non-linearly with increasing temperature. The non-linear, negative relationship between CUE and temperature was more pronounced under lower C availability than under relatively high C availability. We observed stable isotope fractionation between C substrate and microbial biomass C (7~12‰ depletion), and between microbial biomass and respired CO 2 (4~10‰ depletion). Microbial discrimination against 13 C-containing cellobiose during C uptake was influenced by temperature and C availability, while discrimination during respiration was only influenced by C availability. Shifts in C uptake affinity with temperature and C availability may have modified uptake-induced 13 C fractionation. By stressing the importance of C availability on temperature responses of microbial C fluxes, C uptake affinity, CUE, and isotopic fractionation, this study contributes to a fundamental understanding of C flow through microbes. This will help guide parameterization of microbial responses to varying temperature and C availability within Earth-system models.

  4. Large polarization gradients and temperature-stable responses in compositionally-graded ferroelectrics

    Science.gov (United States)

    Damodaran, Anoop R.; Pandya, Shishir; Qi, Yubo; Hsu, Shang-Lin; Liu, Shi; Nelson, Christopher; Dasgupta, Arvind; Ercius, Peter; Ophus, Colin; Dedon, Liv R.; Agar, Josh C.; Lu, Hongling; Zhang, Jialan; Minor, Andrew M.; Rappe, Andrew M.; Martin, Lane W.

    2017-05-01

    A range of modern applications require large and tunable dielectric, piezoelectric or pyroelectric response of ferroelectrics. Such effects are intimately connected to the nature of polarization and how it responds to externally applied stimuli. Ferroelectric susceptibilities are, in general, strongly temperature dependent, diminishing rapidly as one transitions away from the ferroelectric phase transition (TC). In turn, researchers seek new routes to manipulate polarization to simultaneously enhance susceptibilities and broaden operational temperature ranges. Here, we demonstrate such a capability by creating composition and strain gradients in Ba1-xSrxTiO3 films which result in spatial polarization gradients as large as 35 μC cm-2 across a 150 nm thick film. These polarization gradients allow for large dielectric permittivity with low loss (εr~775, tan δ<0.05), negligible temperature-dependence (13% deviation over 500 °C) and high-dielectric tunability (greater than 70% across a 300 °C range). The role of space charges in stabilizing polarization gradients is also discussed.

  5. Active Submarine Volcanoes and Electro-Optical Sensor Networks: The Potential of Capturing and Quantifying an Entire Eruptive Sequence at Axial Seamount, Juan de Fuca Ridge

    Science.gov (United States)

    Delaney, J. R.; Kelley, D. S.; Proskurowski, G.; Fundis, A. T.; Kawka, O.

    2011-12-01

    The NE Pacific Regional Scale Nodes (RSN) component of the NSF Ocean Observatories Initiative is designed to provide unprecedented electrical power and bandwidth to the base and summit of Axial Seamount. The scientific community is engaged in identifying a host of existing and innovative observation and measurement techniques that utilize the high-power and bandwidth infrastructure and its real-time transmission capabilities. The cable, mooring, and sensor arrays will enable the first quantitative documentation of myriad processes leading up to, during, and following a submarine volcanic event. Currently planned RSN instrument arrays will provide important and concurrent spatial and temporal constraints on earthquake activity, melt migration, hydrothermal venting behavior and chemistry, ambient currents, microbial community structure, high-definition (HD) still images and HD video streaming from the vents, and water-column chemistry in the overlying ocean. Anticipated, but not yet funded, additions will include AUVs and gliders that continually document the spatial-temporal variations in the water column above the volcano and the distal zones. When an eruption appears imminent the frequency of sampling will be increased remotely, and the potential of repurposing the tracking capabilities of the mobile sensing platforms will be adapted to the spatial indicators of likely eruption activity. As the eruption begins mobile platforms will fully define the geometry, temperature, and chemical-microbial character of the volcanic plume as it rises into the thoroughly documented control volume above the volcano. Via the Internet the scientific community will be able to witness and direct adaptive sampling in response to changing conditions of plume formation. A major goal will be to document the eruptive volume and link the eruption duration to the volume of erupted magma. For the first time, it will be possible to begin to quantify the time-integrated output of an underwater

  6. Thickness dependence of electro-optical properties of WO{sub 3} films as an electrochromic functional material for energy-efficient applications

    Energy Technology Data Exchange (ETDEWEB)

    Esmail, Ayat; Hashem, Hany; Soltan, Soltan; Hammam, Mahmoud; Ramadan, Ahmed [Faculty of Science, Department of Physics, Helwan University, Cairo (Egypt)

    2017-01-15

    WO{sub 3} films of different thicknesses (100, 200, and 300 nm) were prepared by two vacuum physical vapor deposition (PVD) methods (thermal evaporation and an electron gun). Electrophysical measurements (cyclic voltammetry and chronoamperometry) were carried out using a potentiostat in an electrochromic cell (liquid device) that consists of a substrate coated with double layers of F: SnO{sub 2} and WO{sub 3} served as working electrodes. X-ray diffraction showed an amorphous structure for all the deposited WO{sub 3} thin films. While the transmission in the bleached state does not change and it is close to the as-deposited state, it is slightly less at larger thickness. The cyclic voltammogram was more open (more current flow) for thicker films due to the less dense structure with many channels. Also, the coloration efficiency was higher at low thickness. The response time was of the order of seconds and decreased for coloration, while it increased for the bleaching process as the film thickness increases. According to the proposed figure of merit, the electrochromic performance deteriorates as the WO{sub 3} film thickness decreases. However, the thickness is more effective in the case of an electron gun. Generally, continuous films but thinner than 200 nm, are recommended for deposition methods. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  7. Comparative study of structural and electro-optical properties of ZnO:Ga films grown by steered cathodic arc plasma evaporation and sputtering on plastic and their application on polymer-based organic solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Chih-Hao, E-mail: dataman888@hotmail.com [R& D Division, Walsin Technology Corporation, Kaohsiung, Taiwan (China); Hsiao, Yu-Jen [National Nano Device Laboratories, National Applied Research Laboratories, Tainan, Taiwan (China); Hwang, Weng-Sing [Department of Materials Science and Engineering, National Cheng Kung University, Tainan, Taiwan (China)

    2016-08-01

    Ga-doped ZnO (GZO) films with various thicknesses (105–490 nm) were deposited on PET substrates at a low temperature of 90 °C by a steered cathodic arc plasma evaporation (steered CAPE), and a GZO film with a thickness of 400 nm was deposited at 90 °C by a magnetron sputtering (MS) for comparison. The comparative analysis of the microstructure, residual stress, surface morphology, electrical and optical properties, chemical states, and doping efficiency of the films produced by the steered CAPE and MS processes was performed, and the effect of thickness on the CAPE-grown GZO films was investigated in detail. The results showed that the GZO films grown by steered CAPE exhibited higher crystallinity and lower internal stress than those deposited by MS. The transmittance and electrical properties were also enhanced for the steered CAPE-grown films. The figure of merit (Φ = T{sup 10}/R{sub s}, where T is the transmittance and R{sub s} is the sheet resistance in Ω/□). was used to evaluate the performance of the electro-optical properties. The GZO films with a thickness of 400 nm deposited by CAPE had the highest Φ value, 1.94 × 10{sup −2} Ω{sup −1}, a corresponding average visible transmittance of 88.8% and resistivity of 6.29 × 10{sup −4} Ω·cm. In contrast, the Φ value of MS-deposited GZO film with a thickness of 400 nm is only 1.1 × 10{sup −3} Ω{sup −1}. This can be attributed to the increase in crystalline size, [0001] preferred orientation, decrease in stacking faults density and Ar contamination in steered CAPE-grown films, leading to increases in the Hall mobility and carrier density. In addition, the power conversion efficiency (PCE) of organic solar cells was significantly improved by using the CAPE-grown GZO electrode, and the PCE values were 1.2% and 1.7% for the devices with MS-grown and CAPE-grown GZO electrodes, respectively. - Highlights: • ZnO:Ga (GZO) films were grown on PET by steered cathodic arc plasma evaporation (CAPE

  8. Tunable electro-optic filter stack

    Energy Technology Data Exchange (ETDEWEB)

    Fontecchio, Adam K.; Shriyan, Sameet K.; Bellingham, Alyssa

    2017-09-05

    A holographic polymer dispersed liquid crystal (HPDLC) tunable filter exhibits switching times of no more than 20 microseconds. The HPDLC tunable filter can be utilized in a variety of applications. An HPDLC tunable filter stack can be utilized in a hyperspectral imaging system capable of spectrally multiplexing hyperspectral imaging data acquired while the hyperspectral imaging system is airborne. HPDLC tunable filter stacks can be utilized in high speed switchable optical shielding systems, for example as a coating for a visor or an aircraft canopy. These HPDLC tunable filter stacks can be fabricated using a spin coating apparatus and associated fabrication methods.

  9. A Spherical Electro Optic High Voltage Sensor

    Science.gov (United States)

    1989-06-01

    the application of an electric field applied to the EO crystal, and a photodetector senses the pattern movement. The sensor can be made small (e.g...spherical symmetry simplifies analysis; a uniform£ exists within a spherical dielectric when immursed in a uniform E; conoscopic light production...of an electric field applied to the EO crystal, and a photodetector senses the pattern movement. The sensor can be made small (e.g. < 3mm diam

  10. Electro-Optic Tunable Laser Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop a compact, rugged, rapidly and widely tunable laser based on a quantum cascade diode laser at...

  11. Deciphering systemic wound responses of the pumpkin extrafascicular phloem by metabolomics and stable isotope-coded protein labeling.

    Science.gov (United States)

    Gaupels, Frank; Sarioglu, Hakan; Beckmann, Manfred; Hause, Bettina; Spannagl, Manuel; Draper, John; Lindermayr, Christian; Durner, Jörg

    2012-12-01

    In cucurbits, phloem latex exudes from cut sieve tubes of the extrafascicular phloem (EFP), serving in defense against herbivores. We analyzed inducible defense mechanisms in the EFP of pumpkin (Cucurbita maxima) after leaf damage. As an early systemic response, wounding elicited transient accumulation of jasmonates and a decrease in exudation probably due to partial sieve tube occlusion by callose. The energy status of the EFP was enhanced as indicated by increased levels of ATP, phosphate, and intermediates of the citric acid cycle. Gas chromatography coupled to mass spectrometry also revealed that sucrose transport, gluconeogenesis/glycolysis, and amino acid metabolism were up-regulated after wounding. Combining ProteoMiner technology for the enrichment of low-abundance proteins with stable isotope-coded protein labeling, we identified 51 wound-regulated phloem proteins. Two Sucrose-Nonfermenting1-related protein kinases and a 32-kD 14-3-3 protein are candidate central regulators of stress metabolism in the EFP. Other proteins, such as the Silverleaf Whitefly-Induced Protein1, Mitogen Activated Protein Kinase6, and Heat Shock Protein81, have known defensive functions. Isotope-coded protein labeling and western-blot analyses indicated that Cyclophilin18 is a reliable marker for stress responses of the EFP. As a hint toward the induction of redox signaling, we have observed delayed oxidation-triggered polymerization of the major Phloem Protein1 (PP1) and PP2, which correlated with a decline in carbonylation of PP2. In sum, wounding triggered transient sieve tube occlusion, enhanced energy metabolism, and accumulation of defense-related proteins in the pumpkin EFP. The systemic wound response was mediated by jasmonate and redox signaling.

  12. Symmetry, strain, defects, and the nonlinear optical response of crystalline BaTiO3/silicon

    Science.gov (United States)

    Kormondy, Kristy; Abel, Stefan; Popoff, Youri; Sousa, Marilyne; Caimi, Daniele; Siegwart, Heinz; Marchiori, Chiara; Rossell, Marta; Demkov, Alex; Fompeyrine, Jean

    Recent progress has been made towards exploiting the linear electro-optic or Pockels effect in ferroelectric BaTiO3 (BTO) for novel integrated silicon photonics devices. In such structures, the crystalline symmetry and domain structure of BTO determine which electro-optic tensor elements are accessible under application of an external electric field. For epitaxial thin films of BTO on Si (001), the role of defects in strain relaxation can lead to very different crystalline symmetry even for films of identical thickness. Indeed, through geometric phase analysis of high-resolution scanning transmission electron microscopy images, we map changes of the in-plane and out-of-plane lattice parameters across two 80-nm-thick BTO films. A corresponding 20% difference in the effective electro-optic response was measured by analyzing induced rotation of the polarization of a laser beam (λ = 1550 nm) transmitted through lithographically defined electrodes. Understanding, controlling, and modelling the role of BTO symmetry in nonlinear optics is of fundamental importance for the development of a hybrid BTO/Si photonics platform.. Work supported by the NSF (IRES-1358111), AFOSR (FA9550-12-10494), and European Commission (FP7-ICT-2013-11-619456-SITOGA).

  13. Evidence for Sticky-Trap Avoidance by Stable Fly, Stomoxys calcitrans (Diptera: Muscidae), in Response to Trapped Flies.

    Science.gov (United States)

    Beresford, D V; Sutcliffe, J F

    2017-09-01

    Populations of stable flies, Stomoxys calcitrans, and other filth flies are often sampled using sticky traps. We wanted to know whether flies already caught on sticky traps might inhibit to some extent subsequent flies from being caught. To test this, we recorded the number of stable flies landing on white plastic corrugated panels (Coroplast®), which were prepared according to 4 treatments: 12 live stable flies glued to the surface, 12 live house flies (Musca domestica) glued to the surface, 12 black dots, and no treatment. From 160 observations, we found that fewer stable flies landed on panels with either attached stable flies (129) or house flies (133) compared with the number landing on panels with black dots (259) and/or with no treatment (210). This apparent inhibitory effect of trapped flies may explain published trap-catch patterns from field studies.

  14. Comparison of the perceived subjective exertion and total load lifted response in resistance exercises performed on stable and unstable platforms

    Directory of Open Access Journals (Sweden)

    Liliane Cunha Aranda

    2015-03-01

    Full Text Available This study aimed to compare the perceived subjective exertion (PSE and total load lifted in resistance exercises performed on stable platforms (SP and unstable platforms (UP. Participants were 20 men (24.6 ± 3.4 years, 179 ± 0.1 cm, 80.6 ± 9.1 kg and 11.8 ± 3.4% fat. Each subject performed a 15 maximum repetition test in half squat exercises (soil and balance discs, pronated barbell row (soil and bosu and biceps curl (soil and balance discs in both conditions. PSE was measured using the OMNI-RES scale and the load lifted value (kg. To verify the normality of data, the Shapiro-Wilk test was used. Possible differences related to loads and PSE on the platforms were performed by the paired t test. Significance level of p <0.05 was adopted. No significant differences between PSE values on SP and UP were respectively observed in the half squat (8.2 and 8.5 / p = 0.8, pronated barbell row (8.4 and 8.4 / p = 0.7 and biceps curl (8.6 and 8.7 / p = 1.0. Higher load values on SP and UP were respectively found in half squat (83.9kg and 70.3kg / p <0.001 and pronated barbell row exercises (53.2kg and 48.6kg / p = 0.01 on SP. However, biceps curl showed dissimilar behavior (48.2kg and 47.4kg / p = 0.5. It was concluded that UP does not promote differences in PSE responses even working with smaller load or similar load.

  15. Stable isotopes

    International Nuclear Information System (INIS)

    Evans, D.K.

    1986-01-01

    Seventy-five percent of the world's stable isotope supply comes from one producer, Oak Ridge Nuclear Laboratory (ORNL) in the US. Canadian concern is that foreign needs will be met only after domestic needs, thus creating a shortage of stable isotopes in Canada. This article describes the present situation in Canada (availability and cost) of stable isotopes, the isotope enrichment techniques, and related research programs at Chalk River Nuclear Laboratories (CRNL)

  16. Comparison of the perceived subjective exertion and total load lifted response in resistance exercises performed on stable and unstable platforms

    Directory of Open Access Journals (Sweden)

    Liliane Cunha Aranda

    2015-05-01

    Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2015v17n3p300   This study aimed to compare the perceived subjective exertion (PSE and total load lifted in resistance exercises performed on stable platforms (SP and unstable platforms (UP. Participants were 20 men (24.6 ± 3.4 years, 179 ± 0.1 cm, 80.6 ± 9.1 kg and 11.8 ± 3.4% fat. Each subject performed a 15 maximum repetition test in half squat exercises (soil and balance discs, pronated barbell row (soil and bosu and biceps curl (soil and balance discs in both conditions. PSE was measured using the OMNI-RES scale and the load lifted value (kg. To verify the normality of data, the Shapiro-Wilk test was used. Possible differences related to loads and PSE on the platforms were performed by the paired t test. Significance level of p <0.05 was adopted. No significant differences between PSE values on SP and UP were respectively observed in the half squat (8.2 and 8.5 / p = 0.8, pronated barbell row (8.4 and 8.4 / p = 0.7 and biceps curl (8.6 and 8.7 / p = 1.0. Higher load values on SP and UP were respectively found in half squat (83.9kg and 70.3kg / p <0.001 and pronated barbell row exercises (53.2kg and 48.6kg / p = 0.01 on SP. However, biceps curl showed dissimilar behavior (48.2kg and 47.4kg / p = 0.5. It was concluded that UP does not promote differences in PSE responses even working with smaller load or similar load

  17. Adiponectin as a biomarker of systemic inflammatory response in smoker patients with stable and exacerbation phases of chronic obstructive pulmonary disease.

    Science.gov (United States)

    Kirdar, Sevin; Serter, Mukadder; Ceylan, Emel; Sener, Asli Gamze; Kavak, Tülay; Karadağ, Fisun

    2009-01-01

    Adiponectin is an adipose tissue-derived specific protein that has a role in energy homeostasis, that has a protective role against the development of insulin resistance and atherosclerosis and that exhibits anti-inflammatory properties. We investigated serum adiponectin as a biomarker of systemic inflammatory response and its relation with leptin, C-reactive protein (CRP), erythrocyte sedimentation rate (ESR) and nitric oxide (NO) in chronic obstructive pulmonary disease (COPD) patients. We studied 36 male patients with COPD (15 stable and 21 exacerbated) and 17 age and sex-matched healthy subjects. The adiponectin and leptin levels were measured by enzyme-linked immunosorbent assay. Serum CRP levels were measured using the nephelometric method. ESR was determined using the Westergren method and NO by the cadmium reduction method. Adiponectin levels in COPD patients were significantly higher than those in control subjects (pleptin or NO levels. Serum levels of CRP, ESR and adiponectin were significantly higher in the exacerbated COPD patients compared to the stable group (pleptin and NO levels were not significant. Serum levels of adiponectin were not correlated with FEV(1), FEV(1)/FVC, dyspnoea score, BMI or other inflammatory parameters in the stable COPD group. CRP and ESR correlated negatively with FEV(1) in the stable COPD group. Adiponectin may be a marker of low-grade systemic inflammatory response in COPD. A further rise in serum adiponectin in the exacerbation period denotes that this may also be a biomarker of the exacerbation phase as well as CRP and ESR.

  18. Sex differences in platelet reactivity and cardiovascular and psychological response to mental stress in patients with stable ischemic heart disease: insights from the REMIT study.

    Science.gov (United States)

    Samad, Zainab; Boyle, Stephen; Ersboll, Mads; Vora, Amit N; Zhang, Ye; Becker, Richard C; Williams, Redford; Kuhn, Cynthia; Ortel, Thomas L; Rogers, Joseph G; O'Connor, Christopher M; Velazquez, Eric J; Jiang, Wei

    2014-10-21

    Although emotional stress is associated with ischemic heart disease (IHD) and related clinical events, sex-specific differences in the psychobiological response to mental stress have not been clearly identified. We aimed to study the differential psychological and cardiovascular responses to mental stress between male and female patients with stable IHD. Patients with stable IHD enrolled in the REMIT (Responses of Mental Stress-Induced Myocardial Ischemia to Escitalopram) study underwent psychometric assessments, transthoracic echocardiography, and platelet aggregation studies at baseline and after 3 mental stress tasks. Mental stress-induced myocardial ischemia (MSIMI) was defined as the development or worsening of regional wall motion abnormality, reduction of left ventricular ejection fraction (LVEF) ≥8% by transthoracic echocardiography, and/or ischemic ST-segment change on electrocardiogram during 1 or more of the 3 mental stress tasks. In the 310 participants with known IHD (18% women, 82% men), most baseline characteristics were similar between women and men (including heart rate, blood pressure, and LVEF), although women were more likely to be nonwhite, living alone (p stress, women had more MSIMI (57% vs. 41%; p stress in women and men. Further studies should test the association of sex differences in cardiovascular and platelet reactivity in response to mental stress and long-term outcomes. (Responses of Myocardial Ischemia to Escitalopram Treatment [REMIT]; NCT00574847). Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  19. Fabrication of Photothermal Stable Gold Nanosphere/Mesoporous Silica Hybrid Nanoparticle Responsive to Near-Infrared Light.

    Science.gov (United States)

    Cheng, Bei; Xu, Peisheng

    2017-01-01

    Various gold nanoparticles have been explored in biomedical systems and proven to be promising in photothermal therapy and drug delivery. Among them, nanoshells were regarded as traditionally strong near infrared absorbers that have been widely used to generate photothermal effect for cancer therapy. However, the nanoshell is not photo-thermal stable and thus is not suitable for repeated irradiation. Here, we describe a novel discrete gold nanostructure by mimicking the continuous gold nanoshell-gold/mesoporous silica hybrid nanoparticle (GoMe). It possesses the best characteristics of both conventional gold nanoparticles and mesoporous silica nanoparticles, such as excellent photothermal converting ability as well as high drug loading capacity and triggerable drug release.

  20. Exercise capacity and heart rate responses to exercise as predictors of short-term outcome among patients with stable coronary artery disease.

    Science.gov (United States)

    Kiviniemi, Antti M; Lepojärvi, Samuli; Kenttä, Tuomas V; Junttila, M Juhani; Perkiömäki, Juha S; Piira, Olli-Pekka; Ukkola, Olavi; Hautala, Arto J; Tulppo, Mikko P; Huikuri, Heikki V

    2015-11-15

    Although exercise capacity (EC) and autonomic responses to exercise predict clinical outcomes in various populations, they are not routinely applied in patients with coronary artery disease (CAD). We hypothesized that the composite index of EC and exercise heart rate responses would be a powerful determinant of short-term risk in CAD. Patients with angiographically documented stable CAD and treated with β blockers (n = 1,531) underwent exercise testing to allow the calculation of age- and gender-adjusted EC, maximal chronotropic response index (CRI), and 2-minute postexercise heart rate recovery (HRR, percentage of maximal heart rate). Cardiovascular deaths and hospitalization due to heart failure, registered during a 2-year follow-up (n = 39, 2.5%), were defined as the composite primary end point. An exercise test risk score was calculated as the sum of hazard ratios related to abnormal (lowest tertile) EC, CRI, and HRR. Abnormal EC, CRI, and HRR predicted the primary end point, involving 4.5-, 2.2-, and 6.2-fold risk, respectively, independently of each other. The patients with intermediate and high exercise test risk score had 11.1-fold (95% confidence interval 2.4 to 51.1, p = 0.002) and 25.4-fold (95% confidence interval 5.5 to 116.8, p exercise and recovery is a powerful predictor of short-term outcome in patients with stable CAD. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Use of Maximum Likelihood-Mixed Models to select stable reference genes: a case of heat stress response in sheep

    Directory of Open Access Journals (Sweden)

    Salces Judit

    2011-08-01

    Full Text Available Abstract Background Reference genes with stable expression are required to normalize expression differences of target genes in qPCR experiments. Several procedures and companion software have been proposed to find the most stable genes. Model based procedures are attractive because they provide a solid statistical framework. NormFinder, a widely used software, uses a model based method. The pairwise comparison procedure implemented in GeNorm is a simpler procedure but one of the most extensively used. In the present work a statistical approach based in Maximum Likelihood estimation under mixed models was tested and compared with NormFinder and geNorm softwares. Sixteen candidate genes were tested in whole blood samples from control and heat stressed sheep. Results A model including gene and treatment as fixed effects, sample (animal, gene by treatment, gene by sample and treatment by sample interactions as random effects with heteroskedastic residual variance in gene by treatment levels was selected using goodness of fit and predictive ability criteria among a variety of models. Mean Square Error obtained under the selected model was used as indicator of gene expression stability. Genes top and bottom ranked by the three approaches were similar; however, notable differences for the best pair of genes selected for each method and the remaining genes of the rankings were shown. Differences among the expression values of normalized targets for each statistical approach were also found. Conclusions Optimal statistical properties of Maximum Likelihood estimation joined to mixed model flexibility allow for more accurate estimation of expression stability of genes under many different situations. Accurate selection of reference genes has a direct impact over the normalized expression values of a given target gene. This may be critical when the aim of the study is to compare expression rate differences among samples under different environmental

  2. NK cell responses to cytomegalovirus infection lead to stable imprints in the human KIR repertoire and involve activating KIRs.

    Science.gov (United States)

    Béziat, Vivien; Liu, Lisa L; Malmberg, Jenny-Ann; Ivarsson, Martin A; Sohlberg, Ebba; Björklund, Andreas T; Retière, Christelle; Sverremark-Ekström, Eva; Traherne, James; Ljungman, Per; Schaffer, Marie; Price, David A; Trowsdale, John; Michaëlsson, Jakob; Ljunggren, Hans-Gustaf; Malmberg, Karl-Johan

    2013-04-04

    Human natural killer (NK) cells are functionally regulated by killer cell immunoglobulin-like receptors (KIRs) and their interactions with HLA class I molecules. As KIR expression in a given NK cell is genetically hard-wired, we hypothesized that KIR repertoire perturbations reflect expansions of unique NK-cell subsets and may be used to trace adaptation of the NK-cell compartment to virus infections. By determining the human "KIR-ome" at a single-cell level in more than 200 donors, we were able to analyze the magnitude of NK cell adaptation to virus infections in healthy individuals. Strikingly, infection with human cytomegalovirus (CMV), but not with other common herpesviruses, induced expansion and differentiation of KIR-expressing NK cells, visible as stable imprints in the repertoire. Education by inhibitory KIRs promoted the clonal-like expansion of NK cells, causing a bias for self-specific inhibitory KIRs. Furthermore, our data revealed a unique contribution of activating KIRs (KIR2DS4, KIR2DS2, or KIR3DS1), in addition to NKG2C, in the expansion of human NK cells. These results provide new insight into the diversity of KIR repertoire and its adaptation to virus infection, suggesting a role for both activating and inhibitory KIRs in immunity to CMV infection.

  3. Stable particles

    International Nuclear Information System (INIS)

    Samios, N.P.

    1994-01-01

    I have been asked to review the subject of stable particles, essentially the particles that eventually comprised the meson and baryon octets, with a few more additions - with an emphasis on the contributions made by experiments utilizing the bubble chamber technique. In this activity, much work had been done by the photographic emulsion technique and cloud chambers - exposed to cosmic rays as well as accelerator based beams. In fact, many if not most of the stable particles were found by these latter two techniques, however, the foree of the bubble chamber (coupled with the newer and more powerful accelerators) was to verify, and reinforce with large statistics, the existence of these states, to find some of the more difficult ones, mainly neutrals and further to elucidate their properties, i.e., spin, parity, lifetimes, decay parameters, etc. (orig.)

  4. Stable particles

    International Nuclear Information System (INIS)

    Samios, N.P.

    1993-01-01

    I have been asked to review the subject of stable particles, essentially the particles that eventually comprised the meson and baryon octets. with a few more additions -- with an emphasis on the contributions made by experiments utilizing the bubble chamber technique. In this activity, much work had been done by the photographic emulsion technique and cloud chambers-exposed to cosmic rays as well as accelerator based beams. In fact, many if not most of the stable particles were found by these latter two techniques, however, the forte of the bubble chamber (coupled with the newer and more powerful accelerators) was to verify, and reinforce with large statistics, the existence of these states, to find some of the more difficult ones, mainly neutrals and further to elucidate their properties, i.e., spin, parity, lifetimes, decay parameters, etc

  5. Stable rotating dipole solitons in nonlocal media

    DEFF Research Database (Denmark)

    Lopez-Aguayo, Servando; Skupin, Stefan; Desyatnikov, Anton S.

    2006-01-01

    We present the first example of stable rotating two-soliton bound states in nonlinear optical media with nonlocal response. We show that, in contrast to media with local response, nonlocality opens possibilities to generate stable azimuthons.......We present the first example of stable rotating two-soliton bound states in nonlinear optical media with nonlocal response. We show that, in contrast to media with local response, nonlocality opens possibilities to generate stable azimuthons....

  6. Stable beams

    CERN Multimedia

    2015-01-01

    Stable beams: two simple words that carry so much meaning at CERN. When LHC page one switched from "squeeze" to "stable beams" at 10.40 a.m. on Wednesday, 3 June, it triggered scenes of jubilation in control rooms around the CERN sites, as the LHC experiments started to record physics data for the first time in 27 months. This is what CERN is here for, and it’s great to be back in business after such a long period of preparation for the next stage in the LHC adventure.   I’ve said it before, but I’ll say it again. This was a great achievement, and testimony to the hard and dedicated work of so many people in the global CERN community. I could start to list the teams that have contributed, but that would be a mistake. Instead, I’d simply like to say that an achievement as impressive as running the LHC – a machine of superlatives in every respect – takes the combined effort and enthusiasm of everyone ...

  7. Modelling the response of stable water isotopes in Greenland precipitation to orbital configurations of the previous interglacial

    Directory of Open Access Journals (Sweden)

    Jesper Sjolte

    2014-09-01

    Full Text Available The relation between δ 18O of precipitation and temperature has been used in numerous studies to reconstruct past temperatures at ice core sites in Greenland and Antarctica. During the past two decades, it has become clear that the slope between δ 18O and temperature varies in both space and time. Here, we use a general circulation model driven by changes in orbital parameters to investigate the Greenland δ 18O–temperature relation for the previous interglacial, the Eemian. In our analysis, we focus on changes in the moisture source regions, and the results underline the importance of taking the seasonality of climate change into account. The orbitally driven experiments show that continental evaporation over North America increases during summer in the warm parts of the Eemian, while marine evaporation decreases. This likely flattens the Greenland δ 18O response to temperature during summer. Since the main climate change in the experiments occurs during summer this adds to a limited response of δ 18O, which is more strongly tied to temperature during winter than during summer. A south–west to north–east gradient in the δ 18O–temperature slope is also evident for Greenland, with low slopes in the south–west and steeper slopes in the north–east. This probably reflects the proportion of continental moisture and Arctic moisture arriving in Greenland, with more continental moisture in the south–west and less in the north–east, and vice versa for the Arctic moisture.

  8. Stable-Isotope Analysis of Italian Shallow-Water Carbonates: the Response of Mesozoic Platform Carbonates to Oceanic Anoxic Events

    Science.gov (United States)

    Woodfine, R. G.; Jenkyns, H. C.; Sarti, M.; Bruni, R.; Baroncini, F.

    2001-12-01

    Many recent carbonate platforms have been observed to be in a phase of partial drowning. Factors responsible for degradation of shallow, reefal environments include sea-water temperature, salinity, light, sediment input, nutrients, bioerosion, and tempests. In particular, nutrient excess (eutrophication) has been observed to create environments lacking in carbonate producers and with benthic communities dominated by algal-cyanobacterial mats and bioeroders such as sponges. Sea-water temperatures in excess of 30° C have also led to coral and foraminiferal bleaching and death. The stratigraphic record shows that many carbonate platforms have been through the same process of partial and complete drowning throughout the Phanerozoic. Carbon-, strontium-, and oxygen-isotope analyses were undertaken on Italian platform carbonates and used alongside a poorly constrained biostratigraphy to identify the stratigraphic position of those intervals recording major changes in the Mesozoic carbon-cycle known as Oceanic Anoxic Events (Early Toarcian, Early Aptian, Cenomanian-Turonian) and to investigate the response of carbonate platforms to such events. In the Lower Toarcian sections studied (Trento Platform, Southern Alps, North Italy), bulk-rock \\delta13C(carb) shows a negative excursion with values lower than +1% followed by a positive excursion with values peaking at greater than +4%. This negative excursion has recently been ascribed to be the result of a massive methane gas-hydrate dissociation event and has not been previously recorded in shallow-water platform carbonates. Recent work on Lower Aptian deep- and shallow-water carbonates and organic marine and terrestrial carbon from sections around the world has revealed a similar negative followed by positive \\delta13C trend. In a section through the Friuli Platform (Southern Alps, North Italy), this study has given evidence of an Early Aptian negative excursion but without the presence of an obvious later positive

  9. Species-specific responses of tree ring and leaf stable isotope signals in isohydric and anisohydric trees to drought

    Science.gov (United States)

    Oh, Y.; Welp, L.; Yi, K.; Maxwell, J. T.; Novick, K. A.

    2016-12-01

    Eastern US forests, like many globally, have experienced a significant increase in temperature and summer drought. Recently, it has been suggested to classify tree's water use strategy in response to drought along the spectrum of isohydric to anisohydric species depending on their leaf-level hydraulic regulation. The differences in water use strategy lead to differences in internal leaf CO2 concentrations (Ci). Changes in Ci from stomatal conductance (gs) response to drought and changes in carbon assimilation rates (A) contribute to the tree's intrinsic water use efficiency (iWUE), which is the ratio of A to gs. Changes in iWUE are recorded in 13C/12C (d13C) ratios of stem wood in annual tree rings. Further information from the 18O/16O ratio (d18O) of wood is hypothesized to qualitatively separate the impact of A or gs using the dual-isotope method (Scheideggar et al. 2000). However, recent studies have questioned the applicability of the dual-isotope approach in cases of severe drought. In this study, we will use 3 years (2011-2013) of bulk leaf samples and tree ring cellulose from three isohydric and two anisohydric species in Morgan-Monroe State Forest to examine how the iWUE of each tree species responds to drought in d13C and d18O. To examine dual-isotope approach applied to tree ring measurements in a mechanistic way, we will compare the temporal changes of bulk leaf isotope measurements and leaf gas exchange measurements from an infrared gas analyzer. We will further use the annual dual-isotope signals in leaves and tree rings to test the coupling between leaf and tree ring signals. We hypothesize that (1) the iWUE of isohydric species will respond more sensitively to the severe drought in 2012 than the anisohydric species, and (2) the dual-isotope approach may be more applicable for isohydric species since isotope signals are mainly controlled by the stomata, not the leaf's complicated downstream process. This study will show that oxygen and carbon isotope

  10. Stable and Fast-Response Capacitive Humidity Sensors Based on a ZnO Nanopowder/PVP-RGO Multilayer

    Directory of Open Access Journals (Sweden)

    Hui Yang

    2017-10-01

    Full Text Available In this paper, capacitive-type humidity sensors were prepared by sequentially drop-coating the aqueous suspensions of zinc oxide (ZnO nanopowders and polyvinyl pyrrolidone–reduced graphene oxide (PVP-RGO nanocomposites onto interdigitated electrodes. Significant improvements in both sensitivity and linearity were achieved for the ZnO/PVP-RGO sensors compared with the PVP-RGO/ZnO, PVP-RGO, and ZnO counterparts. Moreover, the produced ZnO/PVP-RGO sensors exhibited rather small hysteresis, fast response-recovery time, and long-term stability. Based on morphological and structural analyses, it can be inferred that the excellent humidity sensing properties of the ZnO/PVP-RGO sensors may be attributed to the high surface-to-volume ratio of the multilayer structure and the supporting roles of the PVP-RGO nanocomposites. The results in this work hence provide adequate guidelines for designing high-performance humidity sensors that make use of the multilayer structure of semiconductor oxide materials and PVP-RGO nanocomposites.

  11. Farmers taking responsibility for herd health development—stable schools in research and advisory activities as a tool for dairy health and welfare planning in Europe

    DEFF Research Database (Denmark)

    Ivemeyer, Silvia; Bell, Nick J.; Brinkmann, Jan

    2015-01-01

    , farmers take responsibility for health and welfare planning by identifying issues, setting goals, and acting to improve the health situation based on farm-specific data, e.g. milk production. This paper reviews the results from intervention studies that used a modified ‘farmer field school’ approach...... for animal health and welfare planning, providing an overview of ongoing activities and their implementation into advisory situations in selected European countries. Studies on stable schools as an intervention tool showed improvements regarding the specific project aim on the majority of the participating...... farms. Farmers and facilitators were convinced of the approach and benefits for dairy herds. Farmers’ attitude and attention towards their herds and their ownership of the process appear to be crucial success factors for herd health and welfare situations. In some European countries, this method has...

  12. Stable, Fast UV-Vis-NIR Photodetector with Excellent Responsivity, Detectivity, and Sensitivity Based on α-In2Te3 Films with a Direct Bandgap.

    Science.gov (United States)

    Yao, Jiandong; Deng, Zexiang; Zheng, Zhaoqiang; Yang, Guowei

    2016-08-17

    Photoelectric conversion is of great importance to extensive applications. However, thus far, photodetectors integrated with high responsivity, excellent detectivity, large phototo-dark current ratio, fast response speed, broad spectral range, and good stability are rarely achieved. Herein, we deposited large-scale and high-quality polycrystalline indium sesquitelluride (α-In2Te3) films via pulsed-laser deposition. Then, we demonstrated that the photodetectors made of the prepared α-In2Te3 films possess stable photoswitching behavior from 370 to 1064 nm and short response time better than ca. 15 ms. At a source-drain voltage of 5 V, the device achieves a high responsivity of 44 A/W, along with an outstanding detectivity of 6 × 10(12) cm H(1/2) W(-1) and an excellent sensitivity of 2.5 × 10(5) cm(2)/W. All of these figures-of-merit are the best among those of the reported α-In2Te3 photodetectors. In fact, they are comparable to the state-of-the-art commercial Si and Ge photodetectors. For the first time, we established the theoretical evidence that α-In2Te3 possesses a direct bandgap structure, which reasonably accounts for the superior photodetection performances above. Importantly, the device exhibits a good stability against the multiple photoswitching operation and ambient environment, along with no obvious voltage-scan hysteresis. These excellent figures-of-merit, together with the broad spectral range and good stability, underscore α-In2Te3 as a promising candidate material for next-generation photodetection.

  13. Using Stable Isotopes to Link Nutrient Sources in the Everglades and Biological Sinks in Florida Bay: A Biogeochemical Approach to Evaluate Ecosystem Response to Changing Nutrient Regimes

    Science.gov (United States)

    Hoare, A. M.; Hollander, D. J.; Heil, C.; Glibert, P.; Murasko, S.; Revilla, M.; Alexander, J.

    2005-05-01

    stable isotopic measurements are important tools in determining nutrient source and biogeochemical processing in these ecosystems and can be used to evaluate future ecological responses to hydrologic restoration.

  14. Deciphering Systemic Wound Responses of the Pumpkin Extrafascicular Phloem by Metabolomics and Stable Isotope-Coded Protein Labeling1[C][W

    Science.gov (United States)

    Gaupels, Frank; Sarioglu, Hakan; Beckmann, Manfred; Hause, Bettina; Spannagl, Manuel; Draper, John; Lindermayr, Christian; Durner, Jörg

    2012-01-01

    In cucurbits, phloem latex exudes from cut sieve tubes of the extrafascicular phloem (EFP), serving in defense against herbivores. We analyzed inducible defense mechanisms in the EFP of pumpkin (Cucurbita maxima) after leaf damage. As an early systemic response, wounding elicited transient accumulation of jasmonates and a decrease in exudation probably due to partial sieve tube occlusion by callose. The energy status of the EFP was enhanced as indicated by increased levels of ATP, phosphate, and intermediates of the citric acid cycle. Gas chromatography coupled to mass spectrometry also revealed that sucrose transport, gluconeogenesis/glycolysis, and amino acid metabolism were up-regulated after wounding. Combining ProteoMiner technology for the enrichment of low-abundance proteins with stable isotope-coded protein labeling, we identified 51 wound-regulated phloem proteins. Two Sucrose-Nonfermenting1-related protein kinases and a 32-kD 14-3-3 protein are candidate central regulators of stress metabolism in the EFP. Other proteins, such as the Silverleaf Whitefly-Induced Protein1, Mitogen Activated Protein Kinase6, and Heat Shock Protein81, have known defensive functions. Isotope-coded protein labeling and western-blot analyses indicated that Cyclophilin18 is a reliable marker for stress responses of the EFP. As a hint toward the induction of redox signaling, we have observed delayed oxidation-triggered polymerization of the major Phloem Protein1 (PP1) and PP2, which correlated with a decline in carbonylation of PP2. In sum, wounding triggered transient sieve tube occlusion, enhanced energy metabolism, and accumulation of defense-related proteins in the pumpkin EFP. The systemic wound response was mediated by jasmonate and redox signaling. PMID:23085839

  15. Generation of Phase-Stable Sub-Cycle Mid-Infrared Pulses from Filamentation in Nitrogen

    Directory of Open Access Journals (Sweden)

    Takao Fuji

    2013-02-01

    Full Text Available Sub-single-cycle pulses in the mid-infrared (MIR region were generated through a laser-induced filament. The fundamental (ω1 and second harmonic (ω2 output of a 30-fs Ti:sapphire amplifier were focused into nitrogen gas and produce phase-stable broadband MIR pulses (ω0 by using a four-wave mixing process (ω1 + ω1 - ω2 → ω0 through filamentation. The spectrum spread from 400 cm-1 to 5500 cm-1, which completely covered the MIR region. The low frequency components were detected by using an electro-optic sampling technique with a gaseous medium. The efficiency of the MIR pulse generation was very sensitive to the delay between the fundamental and second harmonic pulses. It was revealed that the delay dependence of the efficiency came from the interference between two opposite parametric processes, ω1 + ω1 - ω2 → ω0 and ω2 - ω1 - ω1 → ω0. The pulse duration was measured as 6.9 fs with cross-correlation frequency-resolved optical gating by using four-wave mixing in nitrogen. The carrier-envelope phase of the MIR pulse was passively stabilized. The instability was estimated as 154 mrad rms in 2.5 h.

  16. Identification of active denitrifiers by DNA-stable isotope probing and amplicon sequencing reveals Betaproteobacteria as responsible for attenuation of nitrate contamination in a low impacted aquifer.

    Science.gov (United States)

    Bellini, M Inés; Kumaresan, Deepak; Tarlera, Silvana; Murrell, J Colin; Fernández-Scavino, Ana

    2018-02-01

    Groundwater reservoirs constitute important freshwater resources. However, these ecosystems are highly vulnerable to contamination and have to rely on the resident microbiota to attenuate the impact of this contamination. Nitrate is one of the main contaminants found in groundwater, and denitrification is the main process that removes the compound. In this study, the response to nutrient load on indigenous microbial communities in groundwater from a low impacted aquifer in Uruguay was evaluated. Denitrification rates were measured in groundwater samples from three different sites with nitrate, acetate and pyrite amendments. Results showed that denitrification is feasible under in situ nitrate and electron donor concentrations, although the lack of readily available organic energy source would limit the attenuation of higher nitrate concentrations. DNA-stable isotope probing, combined with amplicon sequencing of 16S rRNA, nirS and nirK genes, was used to identify the active denitrifiers. Members of the phylum Betaproteobacteria were the dominant denitrifiers in two of three sites, with different families being observed; members of the genus Vogesella (Neisseriaceae) were key denitrifiers at one site, while the genera Dechloromonas (Rhodocyclaceae) and Comamonas (Comamonadaceae) were the main denitrifiers detected at the other sites. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. High-Dose Sirolimus and Immune-Selective Pentostatin plus Cyclophosphamide Conditioning Yields Stable Mixed Chimerism and Insufficient Graft-versus-Tumor Responses.

    Science.gov (United States)

    Mossoba, Miriam E; Halverson, David C; Kurlander, Roger; Schuver, Bazetta Blacklock; Carpenter, Ashley; Hansen, Brenna; Steinberg, Seth M; Ali, Syed Abbas; Tageja, Nishant; Hakim, Frances T; Gea-Banacloche, Juan; Sportes, Claude; Hardy, Nancy M; Hickstein, Dennis D; Pavletic, Steven Z; Khuu, Hanh; Sabatini, Marianna; Stroncek, David; Levine, Bruce L; June, Carl H; Mariotti, Jacopo; Rixe, Olivier; Fojo, Antonio Tito; Bishop, Michael R; Gress, Ronald E; Fowler, Daniel H

    2015-10-01

    We hypothesized that lymphoid-selective host conditioning and subsequent adoptive transfer of sirolimus-resistant allogeneic T cells (T-Rapa), when combined with high-dose sirolimus drug therapy in vivo, would safely achieve antitumor effects while avoiding GVHD. Patients (n = 10) with metastatic renal cell carcinoma (RCC) were accrued because this disease is relatively refractory to high-dose conditioning yet may respond to high-dose sirolimus. A 21-day outpatient regimen of weekly pentostatin (P; 4 mg/m(2)/dose) combined with daily, dose-adjusted cyclophosphamide (C; ≤200 mg/d) was designed to deplete and suppress host T cells. After PC conditioning, patients received matched sibling, T-cell-replete peripheral blood stem cell allografts, and high-dose sirolimus (serum trough target, 20-30 ng/mL). To augment graft-versus-tumor (GVT) effects, multiple T-Rapa donor lymphocyte infusions (DLI) were administered (days 0, 14, and 45 posttransplant), and sirolimus was discontinued early (day 60 posttransplant). PC conditioning depleted host T cells without neutropenia or infection and facilitated donor engraftment (10 of 10 cases). High-dose sirolimus therapy inhibited multiple T-Rapa DLI, as evidenced by stable mixed donor/host chimerism. No antitumor responses were detected by RECIST criteria and no significant classical acute GVHD was observed. Immune-selective PC conditioning represents a new approach to safely achieve alloengraftment without neutropenia. However, allogeneic T cells generated ex vivo in sirolimus are not resistant to the tolerance-inducing effects of in vivo sirolimus drug therapy, thereby cautioning against use of this intervention in patients with refractory cancer. ©2015 American Association for Cancer Research.

  18. Application of RNA Stable Isotope Probing (SIP) to Link Community Activity with Microorganisms Responsible for Autotrophy in the Subseafloor at Axial Seamount

    Science.gov (United States)

    Huber, J. A.; Fortunato, C. S.

    2014-12-01

    The global ocean comprises the Earth's largest biome, with microorganisms playing a dominant biogeochemical role. However, the potential for production of new microbial biomass within the subseafloor is rarely considered in traditional oceanographic paradigms of carbon cycling or microbial food webs. In this study, we used RNA Stable Isotope Probing (RNA SIP) to determine the microbial community composition and genetic repertoire of active subseafloor autotrophs in warm venting fluids from Axial Seamount. RNA is a responsive biomarker because it is a reflection of cellular activity independent of replication, and RNA SIP thus provides access to both the function of a microbial community and the phylogeny of the organisms accountable for key functions. Diffuse fluids were incubated shipboard at 30°C, 55°C, and 80°C with 13DIC and H2. Metatranscriptomic sequencing of both the enriched and non-enriched RNA was carried out from 13C and 12C controls. In addition, filtered fluid samples were preserved in situ for comparative meta -transcriptomic and -genomic analyses. Diverse lineages of bacteria and archaea and accompanying metabolisms were detected in situ, but RNA SIP results show dominance of three different groups of autotrophs active under each experimental condition. At 30°C, members of the Sulfurimonas genus dominated, with genes for hydrogen oxidation, nitrate reduction, and carbon fixation via the rTCA cycle highly expressed. At 55°C, both Caminibacter and Nautilia transcripts were detected for rTCA cycle, hydrogen oxidation, and nitrate reduction. At 80°C, transcripts for hydrogenotrophic methanogenesis mediated by members of Methanocaldococcus were detected. These results suggest the subseafloor hosts various anaerobic chemolithoautotrophs that span a wide temperature range, with hydrogen playing a key role in microbial metabolism. Complementary experiments are currently being carried out on the seafloor with a novel in situ incubator unit to provide

  19. Stable Isotope Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Tissue samples (skin, bone, blood, muscle) are analyzed for stable carbon, stable nitrogen, and stable sulfur analysis. Many samples are used in their entirety for...

  20. Comparison of vascular response after sirolimus-eluting stent implantation between patients with unstable and stable angina pectoris: a serial optical coherence tomography study.

    Science.gov (United States)

    Kubo, Takashi; Imanishi, Toshio; Kitabata, Hironori; Kuroi, Akio; Ueno, Satoshi; Yamano, Takashi; Tanimoto, Takashi; Matsuo, Yoshiki; Masho, Takashi; Takarada, Shigeho; Tanaka, Atsushi; Nakamura, Nobuo; Mizukoshi, Masato; Tomobuchi, Yoshiaki; Akasaka, Takashi

    2008-07-01

    The aim of the present study was to compare lesion morphologies after sirolimus-eluting stent (SES) implantation between patients with unstable angina pectoris (UAP) and stable angina pectoris (SAP) with the use of optical coherence tomography (OCT). The lesion morphologies before and after coronary stenting have been proposed as important predictors of clinical outcome. The high resolution of OCT provides detailed information of coronary vessel wall. We enrolled 55 patients (UAP: n = 24, SAP: n = 31), and examined lesion morphologies by using OCT at pre- and post-SES implantation and 9 months' follow-up. The incidence of plaque rupture (42% vs. 3%, p < 0.001), intracoronary thrombus (67% vs. 3%, p < or = 0.001) and thin-capped fibroatheroma (cap thickness <65 microm; 46% vs. 3%, p < 0.001) at pre-intervention was significantly greater in UAP than that in SAP. Although stent profiles and procedural characteristics were not different between the 2 groups, inadequate stent apposition (67% vs. 32%, p = 0.038) and tissue protrusion (79% vs. 42%, p = 0.005) after percutaneous coronary intervention were observed more frequently in patients with UAP. Plaque rupture was significantly increased after percutaneous coronary intervention in patients with UAP (42% to 75%, p = 0.018), and the persistence of core cavity after plaque rupture (28% vs. 4%, p = 0.031) at 9 months' follow-up was observed more frequently in UAP patients compared with SAP patients. At 9 months' follow-up, the incidence of inadequately apposed stent (33% vs. 4%, p = 0.012) and partially uncovered stent by neointima (72% vs. 37%, p = 0.019) was significantly greater in UAP patients than that in SAP patients. All patients took aspirin and ticlopidine during follow-up period, and no patients had stent thrombosis or adverse coronary events. Serial OCT examinations demonstrated markedly different vascular response up to 9 months after SES implantation between UAP and SAP patients. Although the inadequate

  1. Summer 1980 Directory of Navy Electro-Optical Professionals.

    Science.gov (United States)

    1981-01-19

    6537 3281 E-O Systems Analysis McDonald, Jimmie R. (Dr.) 6110 3686 Dye Lasers McLean, Edgar A. 4732 2728 E-O Photography, Interferometry McMahon...Patterson, Robert B. 5805 2114 Optical Instrumentation Reintjes, John F. (Dr.) 6540.1 2028 Fast Pulse Laser Systems Rice , Roy W. 6360 2131 IR Domes, Laser...Detectors Burge, Dennis K. 3816 2869/ Optical Surface 3832 Measurements Burroughs , tlubert tt. 3335 2(98/ E-O Fuzes 2479 Bush, John E. 3275 73’ 3 Gas

  2. Theory of Electro-Optical Properties of Graphene Nanoribbons

    OpenAIRE

    Gundra, Kondayya; Shukla, Alok

    2010-01-01

    We present calculations of the optical absorption and electro-absorption spectra of graphene nanoribbons (GNRs) using a $\\pi-$electron approach, incorporating long-range Coulomb interactions within the Pariser-Parr-Pople (PPP) model Hamiltonian. The approach is carefully bench marked by computing quantities such as the band structure, electric-field driven half metallicity, and linear optical absorption spectra of GNRs of various types, and the results are in good agreement with those obtaine...

  3. An Improved Electro-Optical Image Quality Summary Measure.

    Science.gov (United States)

    1981-10-01

    photo- graphing the display of a vidicon camera system viewing silhouettes of the broadside view of a Soviet KOTLIN class destroyer. Observers were...series ,: hard mages. Transparencies of the broadside KOTLIN silhouette were made with the scale :actor ranqin,, from 13b to 1810 meters per picture...3 warship rather than a merchant ship, and (c) the warsh-,;, is identifiable as beinq )f the nDTLIN class. Obviously, since only KOTLIN images were

  4. Electro-optical properties of phosphorene quantum dots

    Science.gov (United States)

    Saroka, V. A.; Lukyanchuk, I.; Portnoi, M. E.; Abdelsalam, H.

    2017-08-01

    We study the electronic and optical properties of single-layer phosphorene quantum dots with various shapes, sizes, and edge types (including disordered edges) subjected to an external electric field normal to the structure plane. Compared to graphene quantum dots, in phosphorene clusters of similar shape and size there is a set of edge states with energies dispersed at around the Fermi level. These states make the majority of phosphorene quantum dots metallic and enrich the phosphorene absorption gap with low-energy absorption peaks tunable by the electric field. The presence of the edge states dispersed around the Fermi level is a characteristic feature that is independent of the edge morphology and roughness.

  5. Development of Electro-Optical Standard Processes for Application

    Science.gov (United States)

    2011-11-01

    Rtools/In-house BB n/a P-7 CEDIP Jade VLWIR 25 mm; f/# 2.0 2006 n/a Rtools/Altair BB Stirling cooled; filter wheel P-A Santa Barbara FPA 25, 50, 100...shielding or isolated by distance. 2.4.4.2 Example(s). Line voltage surges may be caused by motors or other high current drawing industrial equipment in

  6. Molecular Architectural Approach to Novel Electro-Optical Materials

    Energy Technology Data Exchange (ETDEWEB)

    Li, D.; Johal, M.S.; Smilowitz, L.B.; Robinson, J.M.

    1999-06-29

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The goal is to construct polar multilayers with nonlinear optical coefficients larger than classical inorganic crystals such as KDP or quartz. The strategy is to use various chemical interactions such as covalent bonds or hydrogen bonding to build polar structures. We have synthesized novel barbituric acid and melamine derivatives that will spontaneously self-assemble into a supramolecular ribbon according to their complementary H-bond motif. This supramolecular ribbon can then stack into a polar multilayer structure as verified by sum frequency generation (w{sub 1}+w{sub 2}) or second harmonic generation (when w{sub 1}=w{sub 2}). Second harmonic generation yields a value of d{sub 33}=3.2 pm/V for the self-assembled films and sum frequency generation shows a net polar orientation of the methyl groups in the multilayer along the surface normal. X-ray diffraction confirms the layered structure and produces the periodicity of {approximately}41 A, which corresponds well to the width of the supramolecular ribbons ({approximately}40 A).

  7. Linear electro-optic effect in cubic silicon carbide

    Science.gov (United States)

    Tang, Xiao; Irvine, Kenneth G.; Zhang, Dongping; Spencer, Michael G.

    1991-01-01

    The first observation is reported of the electrooptic effect of cubic silicon carbide (beta-SiC) grown by a low-pressure chemical vapor deposition reactor using the hydrogen, silane, and propane gas system. At a wavelength of 633 nm, the value of the electrooptic coefficient r41 in beta-SiC is determined to be 2.7 +/- 0.5 x 10 (exp-12) m/V, which is 1.7 times larger than that in gallium arsenide measured at 10.6 microns. Also, a half-wave voltage of 6.4 kV for beta-SiC is obtained. Because of this favorable value of electrooptic coefficient, it is believed that silicon carbide may be a promising candidate in electrooptic applications for high optical intensity in the visible region.

  8. Electro-Optical Aerosol Phase Function Database PFNDAT2005

    National Research Council Canada - National Science Library

    Shirkey, Richard C; Tofsted, David H

    2005-01-01

    The Phase Function Database (PFNDAT) 2005 consists of a series of wavelength dependent phase functions, single scattering albedos, extinction coefficients, and asymmetry parameters of ten naturally occurring and four manmade aerosols...

  9. Simultaneous Electro-Optical Tracking for Nanoparticle Recognition and Counting.

    Science.gov (United States)

    Angeli, Elena; Volpe, Andrea; Fanzio, Paola; Repetto, Luca; Firpo, Giuseppe; Guida, Patrizia; Lo Savio, Roberto; Wanunu, Meni; Valbusa, Ugo

    2015-09-09

    We present the first detailed experimental observation and analysis of nanoparticle electrophoresis through a nanochannel obtained with synchronous high-bandwidth electrical and camera recordings. Optically determined particle diffusion coefficients agree with values extracted from fitting electrical transport measurements to distributions from 1D Fokker-Planck diffusion-drift theory. This combined tracking strategy enables optical recognition and electrical characterization of nanoparticles in solution, which can have a broad range of applications in biology and materials science.

  10. Architectures of electro-optical packet switched networks

    DEFF Research Database (Denmark)

    Berger, Michael Stubert

    2004-01-01

    This thesis focuses on network- andn ode architectuers for electrical and optical packet switched networks. Future packet switched networks could evolve towards many small, distributed units or towards fewer large, centralised switch units. This work assumes the latter evolution scenario and exam......This thesis focuses on network- andn ode architectuers for electrical and optical packet switched networks. Future packet switched networks could evolve towards many small, distributed units or towards fewer large, centralised switch units. This work assumes the latter evolution scenario...... from optics and electronics. An overview of the DAVID network architecture is given, focusing on the MAN and WAN architecture as well as the MPLS based network hierarchy. A statistical model of the optical slot generation process is presented and utilised to evaluate delay vs. efficiency. Furthermore...

  11. Transparent conducting oxides for electro-optical plasmonic modulators

    DEFF Research Database (Denmark)

    Babicheva, Viktoriia; Boltasseva, Alexandra; Lavrinenko, Andrei V.

    2015-01-01

    of themost promising new materials as the active layer or core—namely, transparent conducting oxides. Such modulatorscan be made low-loss, compact, and exhibit high tunabilitywhile offering low cost and compatibility with existingsemiconductor technologies. A detailed analysis of differentconfigurations...

  12. Effect of thickness on PDLC electro-optics

    Science.gov (United States)

    Akins, Robert B.; West, John L.

    1992-06-01

    Liquid crystal/polymer dispersions have widely recognized promise as light modulators in projection displays for high definition video. Achieving switching voltages compatible with active matrix display drivers while maintaining good on-screen contrast remains an area of active material research. As the driving voltage depends linearly on the liquid crystal/polymer dispersion thickness, one simple method to lower driving voltage is to operate with thinner dispersions. This approach has a significant impact on contrast ratio. We report on the results of a study of the dependence of the driving voltage and contrast ratio as a function of thickness. For very thin samples the voltage does not decrease with thickness and the contrast is greatly reduced, indicating a clear limit to this approach.

  13. Development of an electro-optic super modulator

    International Nuclear Information System (INIS)

    Cusack, B; Shaddock, D.

    2002-01-01

    Full text: Optical phase modulators and amplitude modulators are commonplace in modern laser laboratories. In this talk, we present the development of a device that produces both amplitude modulation (AM) and phase modulation (PM), with a selectable phase relation between the two, on a single free-space Gaussian beam. We term this device a 'super modulator. The device is a version of the Mach-Zehnder modulator, where a beam is split, then separately phase modulated and recombined. Previous work has concentrated on one specific operating point, where the relative modulation phases and the interferometer phase are set to generate single sideband modulation, equivalent to an equal amount of AM and PM in quadrature. Here we are interested in the entire parameter space of amplitude modulation strength, phase modulation strength, and the phase relation between the two. The need for such a super modulator has arisen in the context of control systems for gravitational wave detection interferometers. Typical locking systems are based on the Pound-Drever-Hall method of locking which uses phase modulation. In principle, a super modulator could be used in a PDH configuration, when the locking point of the device will be tunable according to the quantity of AM injected (along with the obligatory PM) into the device

  14. Electro-optic modulation measurement technique and enhancement

    DEFF Research Database (Denmark)

    Jacobsen, Rune Shim

    2005-01-01

    indeks bølgeleder blev påbegyndt. Når denne koefficient opnås i en sådan bølgeleder vil fremtidige forsøg kunne fastlægge hvor stor den inducerede ikke-lineare koefficient i silicium kan blive. Fremtidige forsøg vil også fastlægge om den inducerede effekt eksisterer for hurtig elektrisk modulation....

  15. Intramolecularly Hydrogen-Bonded Polypyrroles as Electro-Optical Sensors

    National Research Council Canada - National Science Library

    Nicholson, Jesse

    2001-01-01

    We have developed a new class of polypyrroles bearing both hydrogen-bond acceptor and hydrogen-donor groups such that the intramolecular hydrogen bonding holds the system planar enhancing conjugation...

  16. Transparent conducting oxides for electro-optical plasmonic modulators

    Directory of Open Access Journals (Sweden)

    Babicheva Viktoriia E.

    2015-06-01

    Full Text Available The ongoing quest for ultra-compact optical devices has reached a bottleneck due to the diffraction limit in conventional photonics. New approaches that provide subwavelength optical elements, and therefore lead to miniaturization of the entire photonic circuit, are urgently required. Plasmonics, which combines nanoscale light confinement and optical-speed processing of signals, has the potential to enable the next generation of hybrid information-processing devices, which are superior to the current photonic dielectric components in terms of speed and compactness. New plasmonic materials (other than metals, or optical materials with metal-like behavior, have recently attracted a lot of attention due to the promise they hold to enable low-loss, tunable, CMOScompatible devices for photonic technologies. In this review, we provide a systematic overview of various compact optical modulator designs that utilize a class of the most promising new materials as the active layer or core— namely, transparent conducting oxides. Such modulators can be made low-loss, compact, and exhibit high tunability while offering low cost and compatibility with existing semiconductor technologies. A detailed analysis of different configurations and their working characteristics, such as their extinction ratio, compactness, bandwidth, and losses, is performed identifying the most promising designs.

  17. Spatially Modulated Gain Waveguide Electro-Optic Laser

    Science.gov (United States)

    2013-08-09

    I j -4M - nut 1479.48m» 0.05nm4) 1479.73rm (b) (c) Fig. 23 Resonance enhancement to optical pump, (a) input...Aligner Dose 50 mJ/CM2@ 405nm Soft contact H^B3W?f?PWy!IF^^Mf!WTf3TiIl CD-26 20 seconds statically, shake the sample gently for 10 seconds Soak ...oven Suss MJB4 Mask Aligner Dose 80 mJ/CM2@ 405nm Soft contact CD-26 30 seconds statically, shake the sample gently seconds for 15 Soak sample

  18. Electro-optical system analysis and design a radiometry perspective

    CERN Document Server

    Willers, Cornelius J

    2013-01-01

    The field of radiometry can be dangerous territory to the uninitiated, faced with the risk of errors and pitfalls. The concepts and tools explored in this book empower readers to comprehensively analyze, design, and optimize real-world systems. This book builds on the foundation of solid theoretical understanding, and strives to provide insight into hidden subtleties in radiometric analysis. Atmospheric effects provide opportunity for a particularly rich set of intriguing observations.

  19. Electro-optical properties, decomposition pathways and the ...

    Indian Academy of Sciences (India)

    2017-08-16

    Aug 16, 2017 ... are limited and alternatives need to be found. Hydrogen is one of the alternative energy sources, which has most remark- able properties such as being the most abundant element in the universe and also an environment friendly renewable energy carrier [1–4]. We know that today's hydrogen energy.

  20. Anisotropic and Electro-Optical Effects in Liquid Crystals.

    Science.gov (United States)

    1981-08-01

    nematic-phase liquid crystals of negative dielectric anisotropy has been previously studied primarily with azoxy mixtures, such as Merck NP-V. These yellow ...of these patterns are similar to a wallpaper pattern while the ac-activated Williams domains consist of many parallel line domains. The dc-Vth

  1. Farmers taking responsibility for herd health development—stable schools in research and advisory activities as a tool for dairy health and welfare planning in Europe

    NARCIS (Netherlands)

    Ivemeyer, Silvia; Bell, Nick J.; Brinkmann, Jan; Cimer, Kornel; Gratzer, Elisabeth; Leeb, Christine; March, Solveig; Mejdell, Cecilie; Roderick, Stephen; Smolders, Gidi; Walkenhorst, Michael; Winckler, Christoph; Vaarst, Mette

    2015-01-01

    Achieving and maintaining a high herd health and welfare status is an important aim in organic livestock farming. The varying farming systems across and within countries call for models that are relevant for different farming types and that can be integrated into local practice. In stable

  2. Stable convergence and stable limit theorems

    CERN Document Server

    Häusler, Erich

    2015-01-01

    The authors present a concise but complete exposition of the mathematical theory of stable convergence and give various applications in different areas of probability theory and mathematical statistics to illustrate the usefulness of this concept. Stable convergence holds in many limit theorems of probability theory and statistics – such as the classical central limit theorem – which are usually formulated in terms of convergence in distribution. Originated by Alfred Rényi, the notion of stable convergence is stronger than the classical weak convergence of probability measures. A variety of methods is described which can be used to establish this stronger stable convergence in many limit theorems which were originally formulated only in terms of weak convergence. Naturally, these stronger limit theorems have new and stronger consequences which should not be missed by neglecting the notion of stable convergence. The presentation will be accessible to researchers and advanced students at the master's level...

  3. Synergistic Trap Response of the False Stable Fly and Little House Fly (Diptera: Muscidae) to Acetic Acid and Ethanol, Two Principal Sugar Fermentation Volatiles

    OpenAIRE

    Landolt, Peter J.; Cha, Dong H.; Zack, Richard S.

    2017-01-01

    In an initial observation, large numbers of muscoid flies (Diptera) were captured as nontarget insects in traps baited with solutions of acetic acid plus ethanol. In subsequent field experiments, numbers of false stable fly Muscina stabulans (Fallén) and little house fly Fannia canicularis (L.) trapped with the combination of acetic acid plus ethanol were significantly higher than those trapped with either chemical alone, or in unbaited traps. Flies were trapped with acetic acid and ethanol t...

  4. stableGP

    Data.gov (United States)

    National Aeronautics and Space Administration — The code in the stableGP package implements Gaussian process calculations using efficient and numerically stable algorithms. Description of the algorithms is in the...

  5. Modeling the Response of Climate and Precipitation Oxygen Stable Isotopes to the Tectonic Development of the Indian Collision Zone during the Cenozoic

    Science.gov (United States)

    Botsyun, S.; Sepulchre, P.; Donnadieu, Y.; Risi, C.; Licht, A.; Caves, J. K.

    2016-12-01

    Tectonics-climate interaction as well as the impact of greenhouse forcing on climate has become a major focus of paleoclimate studies since the quarter of the century. The Himalayas and the Tibetan plateau owes its current height to the Cenozoic collision between Indian and Asian plates, since 55 Ma. However, the timing and rate of surface elevations remain controversial and its impact on Asian climate and the onset of monsoon systems is highly debated. Stable oxygen paleoaltimetry is considered to be a very efficient and widely applied technique, but has limitations from two sides: 1) the link between stable oxygen composition of precipitation and climate is not well established, 2) Cenozoic climate over Asia is poorly reconstructed. With a purpose of filling the gap in our knowledge of climate variability over Asia during the Cenozoic climate we use the atmospheric general circulation model LMDZ. Paleocene, Eocene, Oligocene and Miocene boundary conditions have been applied together with various scenarios of TP growth. The results of our numerical modeling show a significant influence of paleogeography on the Asian climate. Moreover, we use isotope-equipped atmospheric model LMDZ-iso for understanding the controlling factors of δ18O in precipitation. Experiments with reduced height over the Tibetan Plateau and the Himalayas have been designed. We develop a theoretical expression for the precipitation composition. In addition, realist Cenozoic boundary conditions together with isotope-equipped atmospheric model allowed reconstructing δ18O in paleoprecipitation for several periods during the Cenozoic, while comparison of simulated δ18O patterns with data from carbonate archives allowed revealing possible limitations of paleoelevation techniques based on stable oxygen isotopes.

  6. Building Stable MMP2-Responsive Multifunctional Polymeric Micelles by an All-in-One Polymer-Lipid Conjugate for Tumor-Targeted Intracellular Drug Delivery.

    Science.gov (United States)

    Yao, Qing; Dai, Zhi; Hoon Choi, Jong; Kim, Dongin; Zhu, Lin

    2017-09-27

    In this study, we described an "all-in-one" polymer-lipid conjugate (PEG2k-ppTAT-PEG1k-PE) that could self-assemble to matrix metalloproteinase 2 (MMP2)-sensitive multifunctional micelles. The assembled micelles had several key features, including a protective long chain poly(ethylene glycol) (PEG2k) (the outer shell), an MMP2-sensitive peptide linker (pp) (the tumor-targeting middle layer), a trans-activating transcriptional activator (TAT) peptide (the cell-penetrating middle layer), and a stable PEG1k-PE micelle for drug loading (the inner core). In the absence of MMP2, the PEG2k-ppTAT-PEG1k-PE micelles were intact and showed low bioactivity due to the surface-anchored PEG2k, whereas in the presence of MMP2, the pp was cleaved, resulting in the PEG2k deshielding and exposure of the previously hidden TAT for enhanced intracellular drug delivery. Even if completely cleaved by MMP2, the remaining PEG1k-PE micelles were stable and the micelles' particle size and drug release were not significantly influenced. The paclitaxel (PTX)-loaded PEG2k-ppTAT-PEG1k-PE micelles showed significant MMP2-dependent cellular uptake, tumor penetration, and anticancer activity in various cancer cells and three-dimensional multicellular spheroids. Because of the enhanced intracellular drug accumulation, these multifunctional micelles were able to sensitize the drug-resistant cancer cells and their spheroids to PTX treatments. Furthermore, in vivo tumor uptake and retention data indicated that the PEG2k-ppTAT-PEG1k-PE micelles could dramatically increase the residence time of their payloads in the tumor.

  7. Modern rather than Mesoarchaean oxidative weathering responsible for the heavy stable Cr isotopic signatures of the 2.95 Ga old Ijzermijn iron formation (South Africa)

    Science.gov (United States)

    Albut, Gülüm; Babechuk, Michael G.; Kleinhanns, Ilka C.; Benger, Manuela; Beukes, Nicolas J.; Steinhilber, Bernd; Smith, Albertus J. B.; Kruger, Stephanus J.; Schoenberg, Ronny

    2018-05-01

    Previously reported stable Cr isotopic fractionation in Archaean paleosols and iron formations (IFs) have been interpreted as a signature of oxidative weathering of Cr(III) to Cr(VI) in soils, and delivery of isotopically heavy Cr(VI) into the oceans. One of the oldest reported fingerprints of this process is isotopically heavy Cr preserved in the 2.95 Ga old Ijzermijn IF, Sinqeni Formation of the Mozaan Group (Pongola Supergroup), South Africa and could suggest that atmospheric free oxygen was present ca. 600 million years earlier than the Great Oxidation Event (GOE). However, fractionated stable Cr isotopic signatures have only been found to date in surface outcrop samples of the White Mfolozi Inlier exposed along the White Mfolozi River Gorge. In this study, the latter outcrop was resampled along with two drill cores of the Ijzermijn IF and a drill core of the Scotts Hill IF to represent multiple exposures of Mozaan Group IFs with different states of preservation. A detailed geochemical comparison on bulk samples of different units was undertaken using stable Cr isotopes coupled with trace and major elements. Outcrop iron-rich mudstones (Fe - lutites) show very low LOI [wt] %, and very low Fe(II)/Fetot ratios, and lower Ca and Mg relative to equivalent facies in drill cores, indicating the effects that oxidative recent surface weathering had on Fe/Mn-rich carbonate minerals of the IF. Overall rare earth element and yttrium (REE + Y) mixing models agree well with previous studies, confirming that they were minimally disturbed by weathering and are consistent with a high magnitude of continental solutes delivered in a near-shore depositional environment, with a minor contribution of hydrothermally derived fluids that upwelled into shallower depositional setting. Importantly, all drill core samples of this study revealed δ53/52Cr values within the igneous inventory, despite variable amounts of detrital Cr input that includes nearly detritus-free, chert

  8. Synergistic Trap Response of the False Stable Fly and Little House Fly (Diptera: Muscidae) to Acetic Acid and Ethanol, Two Principal Sugar Fermentation Volatiles.

    Science.gov (United States)

    Landolt, Peter J; Cha, Dong H; Zack, Richard S

    2015-10-01

    In an initial observation, large numbers of muscoid flies (Diptera) were captured as nontarget insects in traps baited with solutions of acetic acid plus ethanol. In subsequent field experiments, numbers of false stable fly Muscina stabulans (Fallén) and little house fly Fannia canicularis (L.) trapped with the combination of acetic acid plus ethanol were significantly higher than those trapped with either chemical alone, or in unbaited traps. Flies were trapped with acetic acid and ethanol that had been formulated in the water of the drowning solution of the trap, or dispensed from polypropylene vials with holes in the vial lids for diffusion of evaporated chemical. Numbers of both species of fly captured were greater with acetic acid and ethanol in glass McPhail traps, compared to four other similar wet trap designs. This combination of chemicals may be useful as an inexpensive and not unpleasant lure for monitoring or removing these two pest fly species. Published by Oxford University Press on behalf of Entomological Society of America 2015. This work is written by US Government employees and is in the public domain in the US.

  9. Newly constructed stable reporter cell lines for mechanistic studies on electrophile-responsive element-mediated gene expression reveal a role for flavonoid planarity

    NARCIS (Netherlands)

    Boerboom, A.M.J.F.; Vermeulen, M.; Woude, H. van der; Bremer, B.I.; Lee-Hilz, Y.Y.; Kampman, E.; Bladeren, P.J. van; Rietjens, I.M.C.M.; Aarts, J.M.M.J.G.

    2006-01-01

    The electrophile-responsive element (EpRE) is a transcriptional enhancer involved in cancer-chemoprotective gene expression modulation by certain food components. Two stably transfected luciferase reporter cell lines were developed, EpRE(hNQO1)-LUX and EpRE(mGST-Ya)-LUX, based on EpRE sequences from

  10. Newly constructed stable reporter cell lines for mechanistic studies on electrophile-responsive element-mediated gene expression reveal a role for flavonoid planarity.

    NARCIS (Netherlands)

    Boerboom, A.M.A.; Vermeulen, M.; Woude, H. van der; Bremer, B.I.; Lee-Hilz, Y.Y.; Kampman, E.; Bladeren, P.J. van; Rietjens, I.M.C.M.; Aarts, J.

    2006-01-01

    The electrophile-responsive element (EpRE) is a transcriptional enhancer involved in cancer-chemoprotective gene expression modulation by certain food components. Two stably transfected luciferase reporter cell lines were developed, EpRE(hNQO1)-LUX and EpRE(mGST-Ya)-LUX, based on EpRE sequences from

  11. Stable isotopes labelled compounds

    International Nuclear Information System (INIS)

    1982-09-01

    The catalogue on stable isotopes labelled compounds offers deuterium, nitrogen-15, and multiply labelled compounds. It includes: (1) conditions of sale and delivery, (2) the application of stable isotopes, (3) technical information, (4) product specifications, and (5) the complete delivery programme

  12. Stable Boundary Layer Issues

    NARCIS (Netherlands)

    Steeneveld, G.J.

    2012-01-01

    Understanding and prediction of the stable atmospheric boundary layer is a challenging task. Many physical processes are relevant in the stable boundary layer, i.e. turbulence, radiation, land surface coupling, orographic turbulent and gravity wave drag, and land surface heterogeneity. The

  13. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    IAS Admin

    After Maynard-Smith and Price [1] mathematically derived why a given behaviour or strategy was adopted by a certain proportion of the population at a given time, it was shown that a strategy which is currently stable in a population need not be stable in evolutionary time (across generations). Additionally it was sug-.

  14. Fast Response PDFLC Displays

    International Nuclear Information System (INIS)

    Karapinar, R.

    2004-01-01

    Polymer dispersed ferroelectric liquid crystal (PDFLC) samples were prepared by the polymerization induced phase separation method. The PDFLC films were uniaxially aligned by a shear deformation during ultraviolet curing. Switching was obtained by a voltage dependent optical retardation with the films placed between crossed polarizers. The electro-optical switching of the PDFLC films was studied

  15. Normal modified stable processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole Eiler; Shephard, N.

    2002-01-01

    This paper discusses two classes of distributions, and stochastic processes derived from them: modified stable (MS) laws and normal modified stable (NMS) laws. This extends corresponding results for the generalised inverse Gaussian (GIG) and generalised hyperbolic (GH) or normal generalised inverse...... Gaussian (NGIG) laws. The wider framework thus established provides, in particular, for added flexibility in the modelling of the dynamics of financial time series, of importance especially as regards OU based stochastic volatility models for equities. In the special case of the tempered stable OU process...

  16. Applications of stable isotopes

    International Nuclear Information System (INIS)

    Letolle, R.; Mariotti, A.; Bariac, T.

    1991-06-01

    This report reviews the historical background and the properties of stable isotopes, the methods used for their measurement (mass spectrometry and others), the present technics for isotope enrichment and separation, and at last the various present and foreseeable application (in nuclear energy, physical and chemical research, materials industry and research; tracing in industrial, medical and agronomical tests; the use of natural isotope variations for environmental studies, agronomy, natural resources appraising: water, minerals, energy). Some new possibilities in the use of stable isotope are offered. A last chapter gives the present state and forecast development of stable isotope uses in France and Europe

  17. Response Of Pea Pisum Sativum L. To Organic And Inorganic N-Fertilization With Or Without Benzofurantriol Using 15N Stable Isotope

    International Nuclear Information System (INIS)

    El Sherbieny, A.A.E.; Dahdouh, S.M.; Soliman, S.M.; Ahmed, A.F.

    2012-01-01

    A field experiment was conducted on sandy soil at Inshas, Sharkia Governorate-Egypt under drip irrigation system for evaluating the response of pea crop to different combination of organic and inorganic fertilizer with or without bio-fertilizers. The results indicated that organic compost added solely or in combination with mineral fertilizer was useful as increased growth parameter (fresh weight) of pea plant this effect was more pronounced when combined with bio-fertilizers. N-uptake in hay under Rhizobium bio-fertilization caused marked increased under all condition of N-fertilization or no N-fertilization. Also, the results showed that nitrogen derived from fertilizer (Ndff) in hay was the highest with application of 100% mineral fertilizer without using bio-fertilizer

  18. Short communication: Relationship between serum cortisol concentration and defensive behavioral responses of dairy cows exposed to natural infestation by stable fly, Stomoxys calcitrans.

    Science.gov (United States)

    Vitela-Mendoza, I; Cruz-Vázquez, C; Solano-Vergara, J; Orihuela-Trujillo, A

    2016-12-01

    The aim of this study was conducted to evaluate the effect of natural infestation by Stomoxys calcitrans on the behavioral and adrenocortical responses of dairy cattle. Twenty Holstein cows randomly selected were individually sprayed with insecticide once every 7d, whereas no insecticide was applied to the other 20 animals. The average number of flies per cow was estimated daily, and the frequency of fly-avoidance behaviors was measured daily; plasma cortisol concentration was measured each morning. No flies were ever counted on the treated cows at any time during the experiment, whereas an average of 17.13±1.14 (±standard error) flies/d were recorded on untreated cows. Tail movement was the most frequent behavior displayed, with stamps or kicks showing the highest increment rate (41.2×) when fly population increased from zero to greater than 51 flies/cow. Cortisol concentration increased to a maximum of 56.81±39.53ng/mL with 26 to 30 flies/cow per day. Coefficients of determination between the number of flies, cortisol concentration, tail movements, and stamps or kicks were 0.73, 0.78, and 0.81, respectively. The multiple correlation coefficient was 0.90, with 81% of the variation in cortisol concentration explainable by variation in the number of flies per cow and the frequency of fly-avoidance behaviors. It was concluded that plasma cortisol concentration is linearly related to a combination of the number of flies and the frequency of fly-dislodging behaviors, producing a maximum response before reaching maximum fly loads. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  19. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  20. Oxygen and carbon stable isotope systematics in Porites coral near its latitudinal limit: The coral response to low-thermal temperature stress

    Science.gov (United States)

    Omata, Tamano; Suzuki, Atsushi; Kawahata, Hodaka; Nojima, Satoshi; Minoshima, Kayo; Hata, Akiko

    2006-08-01

    We investigated oxygen and carbon isotopes ( δ18O and δ13C, respectively) along the growth axis of a Porites coral living near the northern limit of hermatypic corals, off Ushibuka, Japan, where winter temperatures fall below the minimum required by most hermatypic corals. The coral's seasonal δ18O cycle depended mainly on seawater temperature, and the slope of the regression line between δ18O and sea-surface temperature for this coral was within reported values. The coral's growth was inhibited in 1968, and at around this time the annual growth rate was reduced. This growth inhibition began in winter 1967/1968, a period of extraordinarily low seawater temperature. Moreover, the amplitude of the annual δ18O fluctuation was small from winter 1967/1968 to winter 1969/1970. Although δ18O and δ13C fluctuations were out of phase most years, they were in phase some years. The in-phase fluctuations of δ18O and δ13C indicate that kinetic isotope effects may have been more important than metabolic isotope effects during those years. Sclerochronologic records thus reveal the coral response to low-temperature stress.

  1. Hydrological responses of the Chihuahua Desert of Mexico to possible Heinrich Stadials: A study inferred from geochemistry and stable isotopes of lacustrine sediments

    Science.gov (United States)

    Quiroz-Jiménez, J. D.; Roy, P. D.; Lozano-SantaCruz, R.; López Balbiaux, N.; Girón-García, P.

    2016-12-01

    The Heinrich Stadials (H6-H1) were cooler intervals of different duration characterized by massive discharge of icebergs from the Laurentide Ice Sheet mainly through the Hudson Straight into the Atlantic Ocean. In this paper, we present a proxy record to infer hydrological responses of the Chihuahua Desert of Mexico to all the Heinrich Stadials (HS) from element ratios, CO3 abundance, and oxygen and carbon isotope compositions of lacustrine calcite of the sediments deposited between depths of 560-78 cm ( 66-8 ka) of a new core collected from the Santiaguillo Basin. Sediments deposited during different HS were identified by radiocarbon dating up to 27.3 ka, extrapolation of an average sediment rate and tuning the CO3 abundance record with insolation in rest of the sequence, and oxygen isotope composition of authigenic CO3. Proxies suggest that hydroclimate of the Chihuahua Desert of Mexico responded differently to different HS. The overall runoff and hence precipitation remained below average during H6, H4, H2 and H1. Both of them were above average during H5 and H3. Similarly, runoff during H4 showed the least variability and it was the most variable during H5. Except for H2, negative excursions in δ18O values suggest cooler conditions during all other HS. In general, dissolved HCO3- was mainly sourced from the atmospheric CO2 during arid intervals. Both the lake productivity and atmospheric CO2 influenced the carbon isotope composition of dissolved HCO3- during humid intervals. During the H2, δ13C values indicate dominant influence of lacustrine productivity. Similar to Chihuahua Desert of Mexico, speleothem records from Fort Stanton and Cave of the Bells (Asmerom et al., 2010; Wagner et al., 2010) showed that hydroclimate of southwest USA also experienced millennial-scale variability and some intervals were more homogeneous compared to others. We did not observe concurrency in proxy records of the Chihuahua Desert of Mexico and southwest USA. Instead, we

  2. De-escalation of tyrosine kinase inhibitor dose in patients with chronic myeloid leukaemia with stable major molecular response (DESTINY): an interim analysis of a non-randomised, phase 2 trial.

    Science.gov (United States)

    Clark, Richard E; Polydoros, Fotios; Apperley, Jane F; Milojkovic, Dragana; Pocock, Christopher; Smith, Graeme; Byrne, Jenny L; de Lavallade, Hugues; O'Brien, Stephen G; Coffey, Tony; Foroni, Letizia; Copland, Mhairi

    2017-07-01

    Discontinuation of tyrosine kinase inhibitor (TKI) therapy is feasible for some patients with chronic myeloid leukaemia with deep molecular responses; however, patients with stable major molecular response (MMR), but not MR4, have not been studied, nor has the effect of treatment de-escalation rather than outright cessation. We aimed to examine the effects of treatment de-escalation as a prelude to complete cessation, not only in patients with MR4 or greater, but also in those with MMR but not MR4. We did this interim analysis of a non-randomised, phase 2 trial at 20 hospitals in the UK. We recruited patients (aged ≥18 years) with chronic myeloid leukaemia in first chronic phase who had received TKI for 3 years or more and were either in stable MR4 (BCR-ABL1:ABL1 ratio 0·1%) on two consecutive samples. The primary endpoint of this interim analysis was the proportion of patients who lost MMR on de-escalation and regained MMR on TKI resumption. Analyses were by intention to treat. This study is registered with ClinicalTrials.gov, number NCT01804985. Between Dec 16, 2013 and April 10, 2015, we enrolled 174 patients into the MMR cohort (n=49) or the MR4 cohort (n=125). During the 12 months of half-dose therapy, 12 patients (7%) had molecular recurrence, all of whom regained MMR within 4 months of full-dose TKI resumption (median time to recovery 77 days). Recurrence was significantly lower in the MR4 cohort (three [2%; 90% CI 0·2-4·8] of 121 evaluable patients) than in the MMR cohort (nine [19%; 90% CI 9·5-28·0] of 48 evaluable patients; hazard ratio 0·12, 90% CI 0·04-0·37; p=0·0007), but was unrelated to previous TKI or TKI therapy duration. Adverse events (eg, lethargy, diarrhoea, rash, and nausea) improved during the first 3 months of de-escalation, though not thereafter. 16 serious adverse events were reported, including one fatality due to worsening pre-existing peripheral arterial occlusive disease in a patient who had received only imatinib. TKI de

  3. Calcium stable isotope geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gausonne, Nikolaus [Muenster Univ. (Germany). Inst. fuer Mineralogie; Schmitt, Anne-Desiree [Strasbourg Univ. (France). LHyGeS/EOST; Heuser, Alexander [Bonn Univ. (Germany). Steinmann-Inst. fuer Geologie, Mineralogie und Palaeontologie; Wombacher, Frank [Koeln Univ. (Germany). Inst. fuer Geologie und Mineralogie; Dietzel, Martin [Technische Univ. Graz (Austria). Inst. fuer Angewandte Geowissenschaften; Tipper, Edward [Cambridge Univ. (United Kingdom). Dept. of Earth Sciences; Schiller, Martin [Copenhagen Univ. (Denmark). Natural History Museum of Denmark

    2016-08-01

    This book provides an overview of the fundamentals and reference values for Ca stable isotope research, as well as current analytical methodologies including detailed instructions for sample preparation and isotope analysis. As such, it introduces readers to the different fields of application, including low-temperature mineral precipitation and biomineralisation, Earth surface processes and global cycling, high-temperature processes and cosmochemistry, and lastly human studies and biomedical applications. The current state of the art in these major areas is discussed, and open questions and possible future directions are identified. In terms of its depth and coverage, the current work extends and complements the previous reviews of Ca stable isotope geochemistry, addressing the needs of graduate students and advanced researchers who want to familiarize themselves with Ca stable isotope research.

  4. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... Home; Journals; Resonance – Journal of Science Education; Volume 21; Issue 9. Evolutionary Stable Strategy: Application of Nash Equilibrium in Biology. General ... Using some examples of classical games, we show how evolutionary game theory can help understand behavioural decisions of animals.

  5. The Stable Concordance Genus

    OpenAIRE

    Kearney, M. Kate

    2013-01-01

    The concordance genus of a knot is the least genus of any knot in its concordance class. Although difficult to compute, it is a useful invariant that highlights the distinction between the three-genus and four-genus. In this paper we define and discuss the stable concordance genus of a knot, which describes the behavior of the concordance genus under connected sum.

  6. Manifolds admitting stable forms

    Czech Academy of Sciences Publication Activity Database

    Le, Hong-Van; Panák, Martin; Vanžura, Jiří

    2008-01-01

    Roč. 49, č. 1 (2008), s. 101-11 ISSN 0010-2628 R&D Projects: GA ČR(CZ) GP201/05/P088 Institutional research plan: CEZ:AV0Z10190503 Keywords : stable forms * automorphism groups Subject RIV: BA - General Mathematics

  7. Stable isotope studies

    International Nuclear Information System (INIS)

    Ishida, T.

    1992-01-01

    The research has been in four general areas: (1) correlation of isotope effects with molecular forces and molecular structures, (2) correlation of zero-point energy and its isotope effects with molecular structure and molecular forces, (3) vapor pressure isotope effects, and (4) fractionation of stable isotopes. 73 refs, 38 figs, 29 tabs

  8. Interactive Stable Ray Tracing

    DEFF Research Database (Denmark)

    Dal Corso, Alessandro; Salvi, Marco; Kolb, Craig

    2017-01-01

    Interactive ray tracing applications running on commodity hardware can suffer from objectionable temporal artifacts due to a low sample count. We introduce stable ray tracing, a technique that improves temporal stability without the over-blurring and ghosting artifacts typical of temporal post-pr...

  9. The stable subgroup graph

    Directory of Open Access Journals (Sweden)

    Behnaz Tolue

    2018-07-01

    Full Text Available In this paper we introduce stable subgroup graph associated to the group $G$. It is a graph with vertex set all subgroups of $G$ and two distinct subgroups $H_1$ and $H_2$ are adjacent if $St_{G}(H_1\\cap H_2\

  10. Stable isotope analysis

    International Nuclear Information System (INIS)

    Tibari, Elghali; Taous, Fouad; Marah, Hamid

    2014-01-01

    This report presents results related to stable isotopes analysis carried out at the CNESTEN DASTE in Rabat (Morocco), on behalf of Senegal. These analyzes cover 127 samples. These results demonstrate that Oxygen-18 and Deuterium in water analysis were performed by infrared Laser spectroscopy using a LGR / DLT-100 with Autosampler. Also, the results are expressed in δ values (‰) relative to V-SMOW to ± 0.3 ‰ for oxygen-18 and ± 1 ‰ for deuterium.

  11. Forensic Stable Isotope Biogeochemistry

    Science.gov (United States)

    Cerling, Thure E.; Barnette, Janet E.; Bowen, Gabriel J.; Chesson, Lesley A.; Ehleringer, James R.; Remien, Christopher H.; Shea, Patrick; Tipple, Brett J.; West, Jason B.

    2016-06-01

    Stable isotopes are being used for forensic science studies, with applications to both natural and manufactured products. In this review we discuss how scientific evidence can be used in the legal context and where the scientific progress of hypothesis revisions can be in tension with the legal expectations of widely used methods for measurements. Although this review is written in the context of US law, many of the considerations of scientific reproducibility and acceptance of relevant scientific data span other legal systems that might apply different legal principles and therefore reach different conclusions. Stable isotopes are used in legal situations for comparing samples for authenticity or evidentiary considerations, in understanding trade patterns of illegal materials, and in understanding the origins of unknown decedents. Isotope evidence is particularly useful when considered in the broad framework of physiochemical processes and in recognizing regional to global patterns found in many materials, including foods and food products, drugs, and humans. Stable isotopes considered in the larger spatial context add an important dimension to forensic science.

  12. Clear cutting (10-13th century) and deep stable economy (18-19th century) as responsible interventions for sand drifting and plaggic deposition in cultural landscapes on aeolian sands (SE-Netherlands).

    Science.gov (United States)

    van Mourik, Jan; Vera, Hein; Wallinga, Jakob

    2013-04-01

    landscapes, characterized by deflation plains (gleyic arenosols) and complexes of inland dunes (haplic arenosols). Clear cutting was responsible for the mediaeval first large scale expansion of drift sand landscapes. In such driftsand landscapes, the majority of the podzolic soils in coversand has been truncated by aeolian erosion. Only on scattered sheltered sites in the landscape, palaeopodzols were buried under mono or polycyclic driftsand deposits. They are now the valuable soil archives for palaeoecological research. During the 18th century, the population growth and regional economic activity stimulated the agricultural productivity. Farmers introduced the innovative 'deep stable' technique to increase the production of fertilizers. Farmers started sod digging, including the top of the Ah horizon of the humus forms. This consequently promoted heath degradation and sand drifting, resulting in the extension of driftsand landscapes. Deep stable economy and sod digging was responsible for the 18th century second large scale expansion of drift sand landscapes. During the 19th century, farmers tried to find alternative fertilizers and authorities initiated reforestation projects. The invention of chemical fertilizers at the end of the 19th century marked the end of the period of heath management and plaggic agriculture. The heath was no longer used for the harvesting of plaggic matter and new land management practices were introduced. Heath was reclaimed to new arable land or reforested with Scotch pine. Geomorphological features as inland dunes and plaggic covers survived in the landscape and are now included in the geological inheritance.

  13. Marginally Stable Nuclear Burning

    Science.gov (United States)

    Strohmayer, Tod E.; Altamirano, D.

    2012-01-01

    Thermonuclear X-ray bursts result from unstable nuclear burning of the material accreted on neutron stars in some low mass X-ray binaries (LMXBs). Theory predicts that close to the boundary of stability oscillatory burning can occur. This marginally stable regime has so far been identified in only a small number of sources. We present Rossi X-ray Timing Explorer (RXTE) observations of the bursting, high- inclination LMXB 4U 1323-619 that reveal for the first time in this source the signature of marginally stable burning. The source was observed during two successive RXTE orbits for approximately 5 ksec beginning at 10:14:01 UTC on March 28, 2011. Significant mHz quasi- periodic oscillations (QPO) at a frequency of 8.1 mHz are detected for approximately 1600 s from the beginning of the observation until the occurrence of a thermonuclear X-ray burst at 10:42:22 UTC. The mHz oscillations are not detected following the X-ray burst. The average fractional rms amplitude of the mHz QPOs is 6.4% (3 - 20 keV), and the amplitude increases to about 8% below 10 keV.This phenomenology is strikingly similar to that seen in the LMXB 4U 1636-53. Indeed, the frequency of the mHz QPOs in 4U 1323-619 prior to the X-ray burst is very similar to the transition frequency between mHz QPO and bursts found in 4U 1636-53 by Altamirano et al. (2008). These results strongly suggest that the observed QPOs in 4U 1323-619 are, like those in 4U 1636-53, due to marginally stable nuclear burning. We also explore the dependence of the energy spectrum on the oscillation phase, and we place the present observations within the context of the spectral evolution of the accretion-powered flux from the source.

  14. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    Every behaviourally responsive animal (including us) make decisions. These can be simple behavioural decisions such aswhere to feed, what to feed, how long to feed, decisions related to finding, choosing and competing for mates, or simply maintaining ones territory. All these are conflict situations between competing ...

  15. Dynamical attraction to stable processes

    OpenAIRE

    Fisher, Albert M.; Talet, Marina

    2012-01-01

    We apply dynamical ideas within probability theory, proving an almost-sure invariance principle in log density for stable processes. The familiar scaling property (self-similarity) of the stable process has a stronger expression, that the scaling flow on Skorokhod path space is a Bernoulli flow. We prove that typical paths of a random walk with i.i.d. increments in the domain of attraction of a stable law can be paired with paths of a stable process so that, after applying a non-random regula...

  16. Proteomic response to 5,6-dimethylxanthenone 4-acetic acid (DMXAA, vadimezan in human non-small cell lung cancer A549 cells determined by the stable-isotope labeling by amino acids in cell culture (SILAC approach

    Directory of Open Access Journals (Sweden)

    Pan ST

    2015-02-01

    Full Text Available Shu-Ting Pan,1,* Zhi-Wei Zhou,2,3,* Zhi-Xu He,3 Xueji Zhang,4 Tianxin Yang,5 Yin-Xue Yang,6 Dong Wang,7 Jia-Xuan Qiu,1 Shu-Feng Zhou2 1Department of Oral and Maxillofacial Surgery, The First Affiliated Hospital of Nanchang University, Nanchang, Jiangxi, People’s Republic of China; 2Department of Pharmaceutical Sciences, College of Pharmacy, University of South Florida, Tampa, FL, USA; 3Guizhou Provincial Key Laboratory for Regenerative Medicine, Stem Cell and Tissue Engineering Research Center and Sino-US Joint Laboratory for Medical Sciences, Guiyang Medical University, Guiyang, 4Research Center for Bioengineering and Sensing Technology, University of Science and Technology Beijing, Beijing, People’s Republic of China; 5Department of Internal Medicine, University of Utah and Salt Lake Veterans Affairs Medical Center, Salt Lake City, UT, USA; 6Department of Colorectal Surgery, General Hospital of Ningxia Medical University, Yinchuan, 7Cancer Center, Daping Hospital and Research Institute of Surgery, Third Military Medical University, Chongqing, People’s Republic of China *These two authors contributed equally to this work Abstract: 5,6-Dimethylxanthenone 4-acetic acid (DMXAA, also known as ASA404 and vadimezan, is a potent tumor blood vessel-disrupting agent and cytokine inducer used alone or in combination with other cytotoxic agents for the treatment of non-small cell lung cancer (NSCLC and other cancers. However, the latest Phase III clinical trial has shown frustrating outcomes in the treatment of NSCLC, since the therapeutic targets and underlying mechanism for the anticancer effect of DMXAA are not yet fully understood. This study aimed to examine the proteomic response to DMXAA and unveil the global molecular targets and possible mechanisms for the anticancer effect of DMXAA in NSCLC A549 cells using a stable-isotope labeling by amino acids in cell culture (SILAC approach. The proteomic data showed that treatment with DMXAA

  17. Shelf-Stable Food Safety

    Science.gov (United States)

    ... is an MRE? Is an MRE shelf stable? What foods are packaged in retort packages? What is aseptic ... type of package is used for aseptic processing? What foods are packaged in aseptic packages? Can I microwave ...

  18. Pharmaceuticals labelled with stable isotopes

    International Nuclear Information System (INIS)

    Krumbiegel, P.

    1986-11-01

    The relatively new field of pharmaceuticals labelled with stable isotopes is reviewed. Scientific, juridical, and ethical questions are discussed concerning the application of these pharmaceuticals in human medicine. 13 C, 15 N, and 2 H are the stable isotopes mainly utilized in metabolic function tests. Methodical contributions are given to the application of 2 H, 13 C, and 15 N pharmaceuticals showing new aspects and different states of development in the field under discussion. (author)

  19. Stable isotope research pool inventory

    International Nuclear Information System (INIS)

    1984-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56

  20. Stable Boundary Layer Education (STABLE) Final Campaign Summary

    Energy Technology Data Exchange (ETDEWEB)

    Turner, David D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    The properties of, and the processes that occur in, the nocturnal stable boundary layer are not well understood, making it difficult to represent adequately in numerical models. The nocturnal boundary layer often is characterized by a temperature inversion and, in the Southern Great Plains region, a low-level jet. To advance our understanding of the nocturnal stable boundary layer, high temporal and vertical resolution data on the temperature and wind properties are needed, along with both large-eddy simulation and cloud-resolving modeling.

  1. Visual and olfactory enhancement of stable fly trapping.

    Science.gov (United States)

    Zhu, Junwei J; Zhang, Qing-He; Taylor, David B; Friesen, Kristina A

    2016-09-01

    Stable flies are considered to be one of the major blood-feeding pests in the US livestock industry, causing losses running into billions of dollars annually. Adult stable flies are highly attracted to Alsynite traps; however, Alsynite is becoming increasingly difficult to obtain and is expensive. Here, we report on the development of a less expensive and more efficacious trap based upon a white panel with the option to add visual and olfactory stimuli for enhanced stable fly trapping. White panel traps caught twice as many stable flies than Alsynite traps. Baiting the traps with synthetic manure volatiles increased catches 2-3-fold. Electroretinographic recordings of stable flies showed strong peaks of visual sensitivities occurring at 330-360 nm, 460-525 nm and 605-635 nm. A laboratory study indicated that young stable flies are more responsive to white, whereas gravid females prefer blue; in the field, white traps caught more stable flies than patterned or blue-black traps. Stable fly control can be enhanced by developing more efficient trapping systems with added visual and olfactory stimuli. Published 2015. This article is a U.S. Government work and is in the public domain in the USA. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  2. 77 FR 60113 - Acceptance of Public Submissions Regarding the Study of Stable Value Contracts

    Science.gov (United States)

    2012-10-02

    ...; File No. S7-32-11] Acceptance of Public Submissions Regarding the Study of Stable Value Contracts...'') are reopening the comment period for a study to determine whether stable value contracts (``SVCs... method. ``Stable Value Contract Study'' must be in the subject field of responses submitted via email...

  3. Tailored antiplatelet therapy to improve prognosis in patients exhibiting clopidogrel low-response prior to percutaneous coronary intervention for stable angina or non-ST elevation acute coronary syndrome

    DEFF Research Database (Denmark)

    Paarup Dridi, Nadia; Johansson, Pär I; Lønborg, Jacob T

    2015-01-01

    Abstract Aim: To investigate whether an intensified antiplatelet regimen could improve prognosis in stable or non-ST elevation in acute coronary syndrome (ACS) patients exhibiting high on-treatment platelet reactivity (HTPR) on clopidogrel and treated with percutaneous coronary intervention (PCI......). There is a wide variability in the platelet reactivity to clopidogrel and HTPR has been associated with a poor prognosis. Methods: In this observational study, 923 consecutive patients without ST-elevation myocardial infarction (STEMI) and adequately pre-treated with clopidogrel were screened for HTPR...... was demonstrated in 237 patients (25.7%). Of these, 114 continued on conventional clopidogrel therapy, while the remaining 123 received intensified antiplatelet therapy with either double-dose clopidogrel (150 mg daily, n = 55) or the newer P2Y12-inhibitors, prasugrel or ticagrelor (n = 68) for at least 30 days...

  4. Contaminants, lipids, fatty acids, and stable isotopes in tissues of various marine mammals - Biomonitoring of marine mammals as part of the Marine Mammal Health and Stranding Response Program (MMHSRP)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Marine Mammal Health and Stranding Response Program (MMHSRP) was established in 1992 under Title IV of the Marine Mammal Protection Act (MMPA). The MMHSRP...

  5. Radiation-stable polyolefin compositions

    International Nuclear Information System (INIS)

    Rekers, J.W.

    1986-01-01

    This invention relates to compositions of olefinic polymers suitable for high energy radiation treatment. In particular, the invention relates to olefinic polymer compositions that are stable to sterilizing dosages of high energy radiation such as a gamma radiation. Stabilizers are described that include benzhydrol and benzhydrol derivatives; these stabilizers may be used alone or in combination with secondary antioxidants or synergists

  6. Monitoring of stable glaucoma patients

    NARCIS (Netherlands)

    K.M. Holtzer-Goor (Kim); N.S. Klazinga (Niek); M.A. Koopmanschap (Marc); H.G. Lemij (Hans); T. Plochg; E. van Sprundel (Esther)

    2010-01-01

    textabstractA high workload for ophthalmologists and long waiting lists for patients challenge the organization of ophthalmic care. Tasks that require less specialized skills, like the monitoring of stable (well controlled) glaucoma patients could be substituted from ophthalmologists to other

  7. Study of Structure and Electro-Optical Characteristics of Indium Tin Oxide Thin Films

    Directory of Open Access Journals (Sweden)

    N. M. Khusayfan

    2013-01-01

    Full Text Available ITO thin films were prepared by electron beam evaporation of ceramic ITO target. The films were subsequently annealed in air atmosphere at the temperatures 300°C and 600°C in order to improve their optical and electrical properties. The crystal structure and morphology of the films are investigated by X-ray diffraction and scanning electron microscope techniques, respectively. The films exhibited cubic structure with predominant orientation of growth along (222 direction, and the crystallite size increases by rising annealing temperature. Transparency of the films, over the visible light region, is increased by annealing temperature. The resulting increase in the carrier concentration and in the carrier mobility decreases the resistivity of the films due to annealing. The absorption coefficient of the films is calculated and analyzed. The direct allowed optical band gap for as-deposited films is determined as 3.81 eV; this value is increased to 3.88 and 4.0 eV as a result of annealing at 300°C and 600°C, respectively. The electrical sheet resistance is significantly decreased by increasing annealing temperature, whereas figure of merit is increased.

  8. Electro-Optical Properties Characterization of Fish Type III Antifreeze Protein

    OpenAIRE

    Salvay, Andrés G.; Santos, Javier; Howard, Eduardo I.

    2007-01-01

    Antifreeze proteins (AFPs) are ice-binding proteins that depress the freezing point of water in a non-colligative manner without a significant modification of the melting point. Found in the blood and tissues of some organisms (such as fish, insects, plants, and soil bacteria), AFPs play an important role in subzero temperature survival. Fish Type III AFP is present in members of the subclass Zoarcoidei. AFPIII are small 7-kDa—or 14-kDa tandem—globular proteins. In the present work, we study ...

  9. A Tutorial on Electro-Optical/Infrared (EO/IR) Theory and Systems

    Science.gov (United States)

    2013-01-01

    called III-V superlattices that use alternating layers such as aluminum gallium arsenide and gallium arsenide (AlGaAs/GaAs) and that allow one to change...arsenide (GaAs) and aluminum gallium arsenide (AlGaAs). For these compounds, the spectral cut-off wavelength is changed by altering the layer...Lockheed Martin’s Hawkeye system. This system is gimbaled and includes an indium antimonide (InSb) MWIR FLIR. The super-resolution algorithms result in

  10. Influence of In doping on electro-optical properties of ZnO films

    Indian Academy of Sciences (India)

    2006). Stoichiometric films are insulating whereas nonsto- ichiometric and oxygen deficient films are very good as transparent semiconducting oxides. Transparent conducting oxides (TCO's) in thin films have become very important for a variety of applications includ- ing gas sensors (Ferro et al 2008), optoelectronic devices.

  11. Electro-optical propagation measurements during the MINOTAUROS experiment in the Cretan Sea

    Science.gov (United States)

    Eisele, Christian; Sucher, Erik; Wendelstein, Norbert; Stein, Karin

    2017-09-01

    We report on propagation measurements performed during the MINOTAUROS (Maritime INvestigations On Targets and Atmosphere Under Reduction of Optical Signatures) experiment on Crete, Greece, in late summer of 2016. The field trial has been organized by NATO STO Task Group SET-211 on Naval Platform Protection in the EO/IR Domain with strong support of the Hellenic Navy. Besides meteorological measurements, the experiment included measurements of turbulence using a boundary layer scintillometer on a slant path (d = 8 km) across the entry of Souda Bay (Crete). These are compared to values obtained by a 3D sonic anemometer, which was deployed at one end of the propagation path. Refraction effects have been measured using a 17.5 km path from Drapanos to Gerani. Two meteorological buoys along the path were used to gather information about the atmospheric conditions. An overview and a first analysis of the results are presented. The refraction measurements are compared to simulations using MORTICIA (Model of Range and Transmission in Coastal Inland Atmospheres), a new software tool currently under development in a collaboration of Fraunhofer IOSB and TNO.

  12. An Underwater Target Detection System for Electro-Optical Imagery Data

    Science.gov (United States)

    2010-06-01

    The detection method involves identifying frames of interest (FOI) containing the potential targets. Once the FOI have been identified, regions of...complicated one. Previous work on EO data has been focused on Streak Tube Imaging Lidar ( STIL ) system [1]–[4], and laser line scan (LLS) [5]–[7...based systems. STIL sensor produces high- resolution 3-D images of underwater objects by scanning (line by line), on the target field [1]. The collected

  13. A high-speed electro-optic triple-microring resonator modulator.

    Science.gov (United States)

    Hong, Jianxun; Qiu, Feng; Cheng, Xiaoyang; Spring, Andrew M; Yokoyama, Shiyoshi

    2017-07-05

    The coupling intensity modulator based on a triple-microring structure was proposed and numerically investigated for a high speed and a low bit error ratio (BER) operation. The modulator consists of a dual-microring optical cavity and a gate-microring energy feedback path. The optical cavity ensures a high energy storing efficiency, and the feedback path enables modulation with little intracavity energy decay. The bandwidth of 103 GHz and modulation depth of 6.2 dB at 2.0 Vpp were theoretically verified by the analysis of the sinusoidal modulation performance. Pulse modulation resulted in a data rate of 160 Gbps, an extinction ratio of 16.84 dB, and a BER of 1 × 10 -8 . The proposed modulator is applicable for compact, high-speed, and low-energy photonic integration.

  14. Colorless detection of NRZ-DPSK signals using electro-optic clock re-modulation

    DEFF Research Database (Denmark)

    Zsigri, Beata; Tokle, Torger; Peucheret, Christophe

    2010-01-01

    Wavelength-independent detection of NRZ-DPSK signals is proposed and demonstrated at 43 Gbit/s. The scheme relies on re-modulation of the incoming NRZ-DPSK signal with a recovered electrical clock. Good performance is obtained after dispersion managed transmission.......Wavelength-independent detection of NRZ-DPSK signals is proposed and demonstrated at 43 Gbit/s. The scheme relies on re-modulation of the incoming NRZ-DPSK signal with a recovered electrical clock. Good performance is obtained after dispersion managed transmission....

  15. Imaging quality evaluation method of pixel coupled electro-optical imaging system

    Science.gov (United States)

    He, Xu; Yuan, Li; Jin, Chunqi; Zhang, Xiaohui

    2017-09-01

    With advancements in high-resolution imaging optical fiber bundle fabrication technology, traditional photoelectric imaging system have become ;flexible; with greatly reduced volume and weight. However, traditional image quality evaluation models are limited by the coupling discrete sampling effect of fiber-optic image bundles and charge-coupled device (CCD) pixels. This limitation substantially complicates the design, optimization, assembly, and evaluation image quality of the coupled discrete sampling imaging system. Based on the transfer process of grayscale cosine distribution optical signal in the fiber-optic image bundle and CCD, a mathematical model of coupled modulation transfer function (coupled-MTF) is established. This model can be used as a basis for following studies on the convergence and periodically oscillating characteristics of the function. We also propose the concept of the average coupled-MTF, which is consistent with the definition of traditional MTF. Based on this concept, the relationships among core distance, core layer radius, and average coupled-MTF are investigated.

  16. Operational Evaluation of the Electro-Optic Tactical Decision Aid, Version 3.1

    National Research Council Canada - National Science Library

    Koch, Cynthia

    1997-01-01

    .... The primary EOTDA output - are target detection ranges and thermal contrast information. The EOTDA supports three types of weapon systems: in%ed (8- 12 micron), visible (0.40.9 micron), and laser (1.06 micronm...

  17. Electro-optic effect in Ba1-xPbxTiO3 films

    Science.gov (United States)

    Fuflyigin, V.; Wang, F.; Jiang, H.; Zhao, J.; Norris, P.

    2000-03-01

    High quality Ba1-xPbxTiO3 (x=0-0.25) films were grown on R-Al2O3 in a wide thickness range of 0.5-3 μm. Significant improvement of the films' crystallinity and optical quality was observed in the presence of lead oxide for the films prepared at 650-700 °C. Strong texture of (110) type was observed in these films. The material is transparent at 350-2000 nm, indicating the possibility of its application in light controlling devices at wavelengths used in optical communication: 1300 and 1500 nm. Maximum field induced relative phase shift of 0.22 rad was measured in the film with composition of Ba0.9Pb0.1TiO3 under a field strength of 3×106 V/cm.

  18. High definition in-situ electro-optical characterization for Roll to Roll printed electronics

    DEFF Research Database (Denmark)

    Pastorelli, Francesco

    2017-01-01

    Resume: Printed electronics is emerging as a new, large scale and cost effective technology that will be disruptive in fields such as energy harvesting, consumer electronics and medical sensors. The performance of printed organic electronic devices relies principally on the carrier mobility...

  19. Influence of In doping on electro-optical properties of ZnO films

    Indian Academy of Sciences (India)

    defects, surface roughness, presence of mixed phases, etc. (Song et al 2004; Luna-Arredondo et al 2005). Therefore, we presume that higher optical transmittances were obtained for doped films because of improved structure and different morphologies (see figure 4). It can be observed that all samples are characterized by.

  20. Fast, Low Loss, Electro-Optic Switch for Quantum Information Processing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Single photon sources and detectors hold the key to achieving success in several quantum communication and computation applications. Many of these goals can be...

  1. Real Time Corner Detection for Miniaturized Electro-Optical Sensors Onboard Small Unmanned Aerial Systems

    Directory of Open Access Journals (Sweden)

    Antonio Moccia

    2012-01-01

    Full Text Available This paper describes the target detection algorithm for the image processor of a vision-based system that is installed onboard an unmanned helicopter. It has been developed in the framework of a project of the French national aerospace research center Office National d’Etudes et de Recherches Aérospatiales (ONERA which aims at developing an air-to-ground target tracking mission in an unknown urban environment. In particular, the image processor must detect targets and estimate ground motion in proximity of the detected target position. Concerning the target detection function, the analysis has dealt with realizing a corner detection algorithm and selecting the best choices in terms of edge detection methods, filtering size and type and the more suitable criterion of detection of the points of interest in order to obtain a very fast algorithm which fulfills the computation load requirements. The compared criteria are the Harris-Stephen and the Shi-Tomasi, ones, which are the most widely used in literature among those based on intensity. Experimental results which illustrate the performance of the developed algorithm and demonstrate that the detection time is fully compliant with the requirements of the real-time system are discussed.

  2. Real Time Corner Detection for Miniaturized Electro-Optical Sensors Onboard Small Unmanned Aerial Systems

    Science.gov (United States)

    Forlenza, Lidia; Carton, Patrick; Accardo, Domenico; Fasano, Giancarmine; Moccia, Antonio

    2012-01-01

    This paper describes the target detection algorithm for the image processor of a vision-based system that is installed onboard an unmanned helicopter. It has been developed in the framework of a project of the French national aerospace research center Office National d’Etudes et de Recherches Aérospatiales (ONERA) which aims at developing an air-to-ground target tracking mission in an unknown urban environment. In particular, the image processor must detect targets and estimate ground motion in proximity of the detected target position. Concerning the target detection function, the analysis has dealt with realizing a corner detection algorithm and selecting the best choices in terms of edge detection methods, filtering size and type and the more suitable criterion of detection of the points of interest in order to obtain a very fast algorithm which fulfills the computation load requirements. The compared criteria are the Harris-Stephen and the Shi-Tomasi, ones, which are the most widely used in literature among those based on intensity. Experimental results which illustrate the performance of the developed algorithm and demonstrate that the detection time is fully compliant with the requirements of the real-time system are discussed. PMID:22368499

  3. Electro-Optical Properties of Hydrogenated Si-Doped CdO

    Science.gov (United States)

    Dakhel, A. A.

    2018-01-01

    The optoelectronic properties of CdO films could be controlled and improved for transparent conducting (TC) purposes by means of doping. In the present work, several sets of CdO thin films hydrogenated and doped with different amounts of silicon were prepared on glass substrates by a thermal deposition technique in order to improve their TC properties. The x-ray diffraction method was used to study the crystal structural variations in CdO films as a consequence of Si(H) doping. Optical properties were studied by means of optical absorption and reflection spectroscopy. The observed blue-shifting in the optical bandgap by Si(H) doping was attributed to the Moss-Burstein effect with reduced structural bandgap by point defects created during the process of doping. The mechanism of the hydrogenation process was explained by the dissociation of hydrogen molecules into atoms/ions, which in turn interacted with structural oxygen ions leading to the creation of oxygen vacancies. The creation of oxygen vacancies caused increases in electron concentration ( N el) and electrical conductivity ( σ). The results showed that Si(H) doping of host CdO films significantly increased their conductivity, mobility, and carrier concentration by ˜ 69, 5.6, and 12.3 times, respectively. The results confirm that Si(H) doping is effective for using CdO films in transparent conducting oxide applications.

  4. Electro-optic transparent frequency conversion of a continuous light wave based on multistage phase modulation.

    Science.gov (United States)

    Hisatake, Shintaro; Kobayashi, Tetsuro

    2006-02-15

    Frequency conversion of a continuous light wave based on multistage phase modulation has been investigated both analytically and numerically. The proposed frequency-conversion process consists of three stages: (i) phase modulation and chirp compression to generate a pulse train, (ii) Doppler shift of the pulse center frequency in a second phase modulation, and (iii) demodulation of the pulse train. By controlling the modulation power we can select the destination frequency from an equally spaced grid separated by the modulation frequency. A conversion efficiency of approximately 40% has been numerically confirmed with respect to a destination frequency of +/- 50 channels. Carrier frequency conversion of an analog data stream is numerically demonstrated.

  5. Design of Hybrid Silicon and Lithium Niobate Active Region for Electro-optical Modulation

    Science.gov (United States)

    2017-03-01

    ground electrodes To simulate the optical portion of the modulator, a 2-D COMSOL Multiphysics® eigenvalue mode solver coupled to a static...electrode gap couple the optical and RF simulation results. To simulate the RF mode formed by the CPW, another COMSOL Multiphysics® eigenvalue mode

  6. Research on disk amplifiers as polarizer of electro-optical switch

    International Nuclear Information System (INIS)

    Zheng Kuixing; Cai Bangwei; Feng Bin; Zheng Jiangang; Dong Yun; Peng Zhitao; Lu Jingping; Jing Feng; Wei Xiaofeng

    2002-01-01

    It benefits to decrease the engineering cost and to debase the technical crisis by the polarizer composed of amplifier Nd 3+ : glass slabs located with the Brewster angle in large scale multi-passes laser facility. The relationships of the isolation efficiency with the numbers of slab, the growth of the amplifier and the switch efficiency of Pockels cell are calculated theoretically. The experimental results indicated that the output energy ratio of this Pockels cell-amplifier isolation system is 1 : 8 while Pockels cell is on and off

  7. A Priori Design of Optimal Electro-Optic Materials for Laser Eye Protection

    Science.gov (United States)

    2008-12-01

    mean absolute error of 22 nm and a maximum deviation of less than 100 nm were reported for anthraquinone and azobenzene dyes (Jacquemin et al., 2008...lead to a problematic polynomial of degree 3. Generalization leads to the following equations including derivatives , where s’ denotes a next...allows the adaptation of continuous optimization methods by substituting derivatives via simple differences. Since the property in question is left

  8. The electro-optical shutter with the small aperture on lithium niobate

    Science.gov (United States)

    Krishtop, Victor; Li, Anton; Litvinova, Man; Tolstov, Eugene; Stroganov, Vladimir I.; Starichenko, Gennadiy

    2005-06-01

    In the paper is considered possibility of changing image intensity by electric field. In anisotropy crystals it is possible to observe conoscopic figures. Dark cross is observed in teh center of figure if electric field in crystal is absent. The angle size of central dark area is approximately 1 degree. When electric field is enclosed to crystal it becomes biaxial. In this case conoscopic figure have light area in the central part. If image is placed in a central part of the figure then it is not visible when electric field is absent. And image becomes visible when electric field is not equal to zero.

  9. Ferroelectric Tungsten Bronze Bulk Crystals and Epitaxial Thin Films for Electro-Optic Device Applications

    Science.gov (United States)

    1984-02-01

    system PKN-BNN 44 Fig. 14 Different size and shape SBN:60 crystals used for photo- refractive studies 49 Fig, 15 Diffraction pattern ...shown in Fig. 3, the striae pattern of crystals sectioned and polished parallel to the growth axis (001) clearly show that the growth under rapidly...field En applied orthogonal to the c axis, the change in the principal birefringence is given by An^ B 1 "\\lh ( 4) Using the conoscopic figure for

  10. Laser electro-optic system for rapid three-dimensional /3-D/ topographic mapping of surfaces

    Science.gov (United States)

    Altschuler, M. D.; Altschuler, B. R.; Taboada, J.

    1981-01-01

    It is pointed out that the generic utility of a robot in a factory/assembly environment could be substantially enhanced by providing a vision capability to the robot. A standard videocamera for robot vision provides a two-dimensional image which contains insufficient information for a detailed three-dimensional reconstruction of an object. Approaches which supply the additional information needed for the three-dimensional mapping of objects with complex surface shapes are briefly considered and a description is presented of a laser-based system which can provide three-dimensional vision to a robot. The system consists of a laser beam array generator, an optical image recorder, and software for controlling the required operations. The projection of a laser beam array onto a surface produces a dot pattern image which is viewed from one or more suitable perspectives. Attention is given to the mathematical method employed, the space coding technique, the approaches used for obtaining the transformation parameters, the optics for laser beam array generation, the hardware for beam array coding, and aspects of image acquisition.

  11. Synthesis and Purification of Tunable High Tg Electro-Optical Polymers by Ring Opening Metathesis Polymerization

    Science.gov (United States)

    2011-09-01

    the residual Ru, Soxhlet extraction was performed with MeOH. The resulting material contained 110 ppm Ru, an improvement over repeated precipitations...ppm) 1 Once precipitated 97 240 2 Twice precipitated 91 160 3 Thrice precipitated 77 140 4 Precipitate, Soxhlet extraction, precipitate 86 110

  12. The Infrared & Electro-Optical Systems Handbook. Emerging Systems and Technologies, Volume 8

    Science.gov (United States)

    1993-01-01

    IEEE 703(11), 1721-1743 (1990). 475. T. H. Jeys, R. M. Heinrichs, K. F. Wall, J. Korn, T. C. Hotaling , and E. Kibblewhite, "Ob- 164 IR/EO HANDBOOK...Jeys, R. M. Heinrichs, K. F. Wall, J. Korn, T. C. Hotaling , and E. Kibblewhite, "Optical pumping of mesospheric sodium" Laser Guide Star Adaptive...lasers have been used for many years in industrial processes (welding, etc.). High-power CO 2 lasers typically use an electrical discharge through a

  13. Linear electro-optical properties of tetragonal BaTiO

    Indian Academy of Sciences (India)

    ionic charge, the value of which can be estimated from that of the Szigeti effective charge. (eS)£. [11]. The expressions for various bond parameters are described in literature [3,9] in detail. If the crystal is composed of different types (according to their lengths, nature of con- stituting elements etc.) of chemical bonds labeled µ ...

  14. Electro-Optic Effects in Colloidal Dispersion of Metal Nano-Rods in Dielectric Fluid

    Directory of Open Access Journals (Sweden)

    Oleg D. Lavrentovich

    2011-02-01

    Full Text Available In modern transformation optics, one explores metamaterials with properties that vary from point to point in space and time, suitable for application in devices such as an “optical invisibility cloak” and an “optical black hole”. We propose an approach to construct spatially varying and switchable metamaterials that are based on colloidal dispersions of metal nano-rods (NRs in dielectric fluids, in which dielectrophoretic forces, originating in the electric field gradients, create spatially varying configurations of aligned NRs. The electric field controls orientation and concentration of NRs and thus modulates the optical properties of the medium. Using gold (Au NRs dispersed in toluene, we demonstrate electrically induced change in refractive index on the order of 0.1.

  15. On the Detection of Drifting Sea Mines using Ship Radar and Electro-Optical Systems

    NARCIS (Netherlands)

    Dol, H.S.; Kossen, A.S.; Schwering, P.B.W.; Beckers, A.L.D.

    2010-01-01

    Small drifting objects can be a big threat to surface ships, especially when the objects are explosion hazards like sea mines that have become detached from their moorings. Timely detection of such objects is crucial in order to be able to perform adequate evasive manoeuvres. Due to the uncontrolled

  16. Linear electro-optical properties of tetragonal BaTiO

    Indian Academy of Sciences (India)

    (eS)£. [11]. The expressions for various bond parameters are described in literature [3,9] in detail. If the crystal is composed of different types (according to their lengths, nature of con- stituting elements etc.) of chemical bonds labeled µ, then its total linear macroscopic sus- ceptibility (χ) can be estimated from those (χ µ) for ...

  17. Electro-optical characteristics of indium tin oxide (ITO) films: effect of thermal annealing

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, D.V.; Salehi, A.; Aliyu, Y.H.; Bunce, R.W. [University of Wales College of Cardiff (United Kingdom). School of Electrical, Electronics and System Engineering

    1996-02-01

    The effect of thermal annealing on the electrical and optical characteristics of ITO films prepared by reactive sputtering and thermal evaporation have been studied. The effect of the thermal annealing is to improve the conductivity and the optical transmission in the shorter wavelength region. The conductivity of the films increases with annealing temperature, this behaviour is associated with grain growth in the film. (author)

  18. An optical, electro-optic and thermal characterisation of various organic crystals

    CERN Document Server

    Lochran, S

    1997-01-01

    The organic materials S - 3 - methyl - 5 - nitro - N - (1 - phenylethyl) - 2 - pyridinamine [3- methyl-MBANP] and S - N - methyl - 5 - nitro - N -(1 - phenylethyl) - 2 - pyridinamine [N- methyl-MBANP] belong to a family of compounds based on the 2-(alpha-methylbenzylamino)-5- nitropyridine molecule and were identified as promising nonlinear optical materials by the powder disk test. Large single crystals were grown from solution for N-methyl-MBANP, which crystallises in a monoclinic space group, and from the melt and solution for 3-methyl-MBANP which crystallises in an orthorhombic space group. Orthoscopic examination of N-methyl-MBANP revealed no dispersion of the dielectric axes unlike the parent molecule and the position of the dielectric axes was correlated with the molecular structure. Preparation of prisms from single crystals of both materials facilitated the measurement of refractive indices in the visible and the near infra-red. The values obtained were correlated with the crystal structure and a Sel...

  19. Colloidal photonic glass for electro-optic display stabilized with potassium persulfate (KPS) in polar solvent

    Science.gov (United States)

    Lee, Hye-Young; Kim, Young-Seok; Yi, Gi-Ra

    2016-04-01

    We introduced carbon-shell with potassium persulfate structure to modify the repulsive force between particles and minimize scattered light. The reflected structural color varied from blue to red and showed high color purity with high cycle stability.

  20. Electro-optic and dielectric properties of new binary ferroelectric and antiferroelectric liquid crystalline mixtures

    Czech Academy of Sciences Publication Activity Database

    Fitas, J.; Marzec, M.; Kurp, K.; Żurowska, M.; Tykarska, M.; Bubnov, Alexej

    2017-01-01

    Roč. 44, č. 9 (2017), s. 1468-1476 ISSN 0267-8292 R&D Projects: GA MŠk(CZ) LD14007; GA ČR GA15-02843S Grant - others:EU - ICT(XE) COST Action IC1208 Institutional support: RVO:68378271 Keywords : liquid crystals * ferroelectric and antiferroelectric phase * binary mixture * dielectric spectroscopy * switching time * tilt angle Subject RIV: JJ - Other Materials OBOR OECD: Nano-materials (production and properties) Impact factor: 2.661, year: 2016

  1. Electro-optical and physic-mechanical properties of colored alicyclic polyimide

    Science.gov (United States)

    Kravtsova, V.; Umerzakova, M.; Korobova, N.; Timoshenkov, S.; Timoshenkov, V.; Orlov, S.; Iskakov, R.; Prikhodko, O.

    2016-09-01

    Main optical, thermal and mechanical properties of new compositions based on alicyclic polyimide and active bright red 6C synthetic dye have been studied. It was shown that the transmission ratio of the new material in the region of 400-900 nm and 2.0 wt.% dye concentration was around 60-70%. Thermal, mechanical and electrical properties of new colored compositions were comparable with the properties of original polyimide.

  2. Electro-optical characterization and analysis of CuPc-based solar ...

    Indian Academy of Sciences (India)

    layer thickness. Keywords. Organic semiconductors; photovoltaics; heterojunctions; Schottky diodes. PACS Nos 71.20.Rv; 72.40.+w; 73.50.Pz. 1. Introduction. Photovoltaic cells made of organic semiconductors hold great promise for low cost, portable, lightweight, flexible and wearable solar cell applications [1,2]. In partic-.

  3. Features of electro-optical characteristics of composite liquid crystal media (a review)

    Science.gov (United States)

    Amosova, L. P.; Venediktov, V. Yu.

    2016-11-01

    Main patterns of structure formation of composite liquid crystal (LC) media and their classification according to the percentage content of liquid crystal and polymer are considered. Their properties are compared with the properties of homogeneous LC layers and the opportunities of their practical use in optical modulators are discussed. It is shown that, at small (10 wt %) monomer concentrations in the composite, its polymerization leads to formation of a thin-wall network which separates the liquid crystal into domains and provides an uniform orientation in the bulk. The polymer network increases the elasticity of the layer and decreases the relaxation time, but the devices usually work in polarized light and use the same principle as the devices filled with pure LC; i.e. the phase of the light or its polarization changes due to a change in the effective refraction index. However, the division of the LC volume into relatively autonomous domains also allows one to create a polarization-independent device based on the scattering effect. By increasing the relative content of the monomer, it is possible to ensure formation of a porous polymer matrix with inclusions of isolated from each other LC droplets. Such polymer-dispersed LC in its initial state either scatter the light of any polarization and becomes transparent state when an electric field is applied, or, with the use of special methods, the switch-off and switch-on states are swapped ("reverse mode" devices). The main advantages of the composite media are independence of polarization, mechanical strength, and small relaxation times, while the main disadvantages are increased power consumption, high polarization-independent optical losses, and significantly lower contrast. Possible ways to increase the contrast are described.

  4. Electro-Optical Multichannel Spectrometer for Transient Resonance Raman and Absorption Spectroscopy

    DEFF Research Database (Denmark)

    Hansen, Karina Benthin; Wilbrandt, Robert Walter; Pagsberg, Palle Bjørn

    1979-01-01

    An optical multichannel system is described, used for time‐dependent absorption measurements in the gas phase and the liquid phase and for resonance Raman spectroscopy of short‐lived transient species in the liquid phase in pulse radiolysis. It consists of either an image converter streak unit or...

  5. Energy structure and electro-optical properties of organic layers with carbazole derivative

    International Nuclear Information System (INIS)

    Pudzs, K.; Vembris, A.; Muzikante, I.; Grzibovskis, R.; Turovska, B.; Simokaitiene, J.; Grigalevicius, S.; Grazulevicius, J.V.

    2014-01-01

    Phosphorescent organic light emitting diodes are perspective in lighting technologies due to high efficient electroluminescence. Not only phosphorescent dyes but also host materials are important aspect to be considered in the devices where they are a problem for blue light emitting phosphorescent molecules. Carbazole derivative 3,6-di(9-carbazolyl)-9-(2-ethylhexyl)carbazole (TCz1) is a good candidate and has shown excellent results in thermally evaporated films. This paper presents the studies of electrical properties and energy structure in thin films of spin-coated TCz1 and thermally evaporated tris[2-(2,4-difluorophenyl)pyridine]iridium(III) (Ir(Fppy) 3 ). The 0.46 eV difference of electron conduction level between TCz1 and Ir(Fppy) 3 compounds was obtained from the cyclic voltammetry and photoconductivity measurements. Temperature modulated space charge limited current (TM-SCLC) method is used to measure the local trapping states for charge carrier in the energy gap. The TM-SCLC measurements for the system TCz1 + 8 wt.% Ir(Fppy) 3 show a trapping state with the value of 0.4 eV which is comparable to the conduction level difference of these materials. It allows to conclude that Ir(Fppy) 3 molecules act as electron traps in the TCz1 matrix and the TM-SCLC method is applicable to investigate dopants as trapping states. To show the trap effect, an organic light emitting diode was made where the electroluminescent layer was a spin-coated host-guest system of TCz1 with incorporated 8 wt.% Ir(Fppy) 3 . - Highlights: • Phosphorescent molecules work as electron traps in the matrix. • Space charge limit current can be used to investigate traps formed by dopant. • Electroluminescence was observed in solution processed thin film

  6. Synthetic Aspects and Electro-Optical Properties of Fluorinated Arylenevinylenes for Luminescence and Photovoltaics

    Directory of Open Access Journals (Sweden)

    Antonio Cardone

    2013-03-01

    Full Text Available In this review, the main synthetic aspects and properties of fluorinated arylenevinylene compounds, both oligomers and polymers, are summarized and analyzed. Starting from vinyl organotin derivatives and aryl halides, the Stille cross-coupling reaction has been successfully applied as a versatile synthetic protocol to prepare a wide series of π-conjugated compounds, selectively fluorinated on the aromatic and/or vinylene units. The impact of fluoro-functionalization on properties, the solid state organization and intermolecular interactions of the synthesized compounds are discussed, also in comparison with the non-fluorinated counterparts. Luminescent and photovoltaic applications are also discussed, highlighting the role of fluorine on the performance of devices.

  7. Electro-Optical Effects to Visualize Field and Current Distributions in Semiconductors

    CERN Document Server

    Böer, Karl W

    2010-01-01

    The book describes the basic principles that relate to field and current inhomogeneities in semiconductors and their kinetics that occur in the regime of negative differential conductances of semiconductors. The book presents the related theory and experiment. It proceeds to give for the first time the experimental methods to observe directly these inhomogeneities within the semiconductor. It analyses in detail the different ranges in which such inhomogeneities occur, when they are stationary and when not and what technical and device application result. The accompanying film on the website demonstrates all related kinetic effects. Information on these effects was previously mostly available indirectly by interpretation of current-voltage characteristics, or by point contact probing along the surface, or by changes in the luminescence spectrum. The material is based on the original papers of the research team of the author, starting in the late 50’s and updated to incl. 2008.

  8. Time-Resolved CubeSat Photometry with a Low Cost Electro-Optics System

    Science.gov (United States)

    Gasdia, F.; Barjatya, A.; Bilardi, S.

    2016-09-01

    Once the orbits of small debris or CubeSats are determined, optical rate-track follow-up observations can provide information for characterization or identification of these objects. Using the Celestron 11" RASA telescope and an inexpensive CMOS machine vision camera, we have obtained time-series photometry from dozens of passes of small satellites and CubeSats over sites in Florida and Massachusetts. The fast readout time of the CMOS detector allows temporally resolved sampling of glints from small wire antennae and structural facets of rapidly tumbling objects. Because the shape of most CubeSats is known, these light curves can be used in a mission support function for small satellite operators to diagnose or verify the proper functioning of an attitude control system or deployed antenna or instrument. We call this telescope system and the accompanying analysis tools OSCOM for Optical tracking and Spectral characterization of CubeSats for Operational Missions. We introduce the capability of OSCOM for space object characterization, and present photometric observations demonstrating the potential of high frame rate small satellite photometry.

  9. Investigation of Electron Transfer-Based Photonic and Electro-Optic Materials and Devices

    Energy Technology Data Exchange (ETDEWEB)

    Bromenshenk, Jerry J; Abbott, Edwin H; Dickensheets, David; Donovan, Richard P; Hobbs, J D; Spangler, Lee; McGuirl, Michele A; Spangler, Charles; Rebane, Aleksander; Rosenburg, Edward; Schmidt, V H; Singel, David J

    2008-03-28

    Montana's state program began its sixth year in 2006. The project's research cluster focused on physical, chemical, and biological materials that exhibit unique electron-transfer properties. Our investigators have filed several patents and have also have established five spin-off businesses (3 MSU, 2 UM) and a research center (MT Tech). In addition, this project involved faculty and students at three campuses (MSU, UM, MT Tech) and has a number of under-represented students, including 10 women and 5 Native Americans. In 2006, there was an added emphasis on exporting seminars and speakers via the Internet from UM to Chief Dull Knife Community College, as well as work with the MT Department of Commerce to better educate our faculty regarding establishing small businesses, licensing and patent issues, and SBIR program opportunities.

  10. Research on disk amplifiers as polarizer of electro-optical switch

    CERN Document Server

    Zheng Kui Xing; Feng Bin; Zheng Jian; Dong Yun; Peng Zhi Tao; Lu Jing Ping; Jing Feng; Wei Xiao Feng

    2002-01-01

    It benefits to decrease the engineering cost and to debase the technical crisis by the polarizer composed of amplifier Nd sup 3 sup + : glass slabs located with the Brewster angle in large scale multi-passes laser facility. The relationships of the isolation efficiency with the numbers of slab, the growth of the amplifier and the switch efficiency of Pockels cell are calculated theoretically. The experimental results indicated that the output energy ratio of this Pockels cell-amplifier isolation system is 1 : 8 while Pockels cell is on and off

  11. Quantitative Description of Obscuration Factors for Electro-Optical and Millimeter Wave Systems

    Science.gov (United States)

    1986-07-25

    11,and 94 - Gife.~ ~ ~ ~ ~ ~ ~ ~ ~~~~. tatttJuigCmmLagrtri (t.3. % lw watvlegths, extincion due to rain would (dr i.tali in s~ 14 11 3-5.:. al o it n...ini1 a ralat beii thiat ctuble thr inisbilt’ to sens it% loaion601 selatete tW 1thV h-al. fEttitW its 4 010s. Extincion . Ihe i-nsat l of n g) b

  12. Efficient electro-optic modulation in low-loss graphene-plasmonic slot waveguides

    DEFF Research Database (Denmark)

    Ding, Y; Guan, Xiaowei; Zhu, X

    2017-01-01

    , and the devices are fully integrated in the silicon-on-insulator platform. By advantageously exploiting low-loss plasmonic slot-waveguide modes, which weakly leak into a substrate while featuring strong fields within the two-layer-graphene covered slots in metals, we successfully achieve a tunability of 0.13 d......B μm-1 for our fabricated graphene-plasmonic waveguide devices with extremely low insertion loss, which outperforms previously reported graphene-plasmonic devices. Our results highlight the potential of graphene plasmonic leaky-mode hybrid waveguides to realize active ultra-compact devices...

  13. NOVAM Evaluation Utilizing Electro-Optics and Meteorological Data from KEY-90

    Science.gov (United States)

    1993-09-01

    Moerman 0oo TNO Physics and Electronics Laboratory,The Netherlands Approved for public release; distribution is unlimited. NW2 VE Technical Report...Manchester Institute of Science and Technology, United Kingdom G. de Leeuw, G. J. Kunz, M. M. Moerman TNO Physics and Electronics Laboratory, The...D1t Spo- •1 I DM JII II-II- CONTENTS IN TRO D U CTIO N ............................................................ 1 O V ERV IEW

  14. Task-specific sensor settings for electro-optical systems in a marine environment

    NARCIS (Netherlands)

    Schwering, P.B.W.; Broek, S.P. van den; Kemp, R.A.W.; Lensen, H.A.

    2010-01-01

    Present-day naval operations take place in coastal environments as well as narrow straits all over the world. Coastal environments around the world are exhibiting a number of threats to naval forces. In particular, a large number of asymmetric threats can be present in environments with cluttered

  15. Real time pulse width monitor for Intensified Charge Coupled Device (ICCD) electro-optic shutters

    Energy Technology Data Exchange (ETDEWEB)

    Yates, G.J.

    1996-12-01

    A method is described or controlling and measuring the pulse width of electrical gate pulses used for optical shuttering of image intensifier. The intensifiers are coupled to high frame rate Charge-Coupled-Devices (CCD) or Focus-Projection Scan (FPS) vidicon TV cameras for readout and telemetry of time resolved image sequences. The shutter duration or gate width of individual shutters is measured in real time and encoded in the video frame corresponding to a given shutter interval. The shutter information is updated once catch video frame by strobing new data with each TV camera vertical sync pulse. This circuitry is used in conjunction with commercial video insertion/annotation equipment to provide die shutter width information in alpha numeric text form along with the time resolved video image on a frame-by-frame basis. The measurement technique and circuitry involving a combination of high speed digital counters and analog integrators for measurements in the Ins to 1024 ns range are described. The accuracy obtained is compared with measurements obtained using batch speed DSOs. The measured data are provided in 10-bit Binary (Bi) and four decades of Binary Coded Decimal (BCD) and also displayed on four digit seven segment displays. The control circuitry including digital and analog input means for gate width selection are described. The implementation of both measurement and control circuitry into an Intensified Shuttered CCD (ISCCD) radiometric system for recording fast shuttered images at RS-170 to 4 KHz frame rates is presented.

  16. Multiple-mode reconfigurable electro-optic switching network for optical fiber sensor array

    Science.gov (United States)

    Chen, Ray T.; Wang, Michael R.; Jannson, Tomasz; Baumbick, Robert

    1991-01-01

    This paper reports the first switching network compatible with multimode fibers. A one-to-many cascaded reconfigurable interconnection was built. A thin glass substrate was used as the guiding medium which provides not only higher coupling efficiency from multimode fiber to waveguide but also better tolerance of phase-matching conditions. Involvement of a total-internal-reflection hologram and multimode waveguide eliminates interface problems between fibers and waveguides. The DCG polymer graft has proven to be reliable from -180 C to +200 C. Survivability of such an electrooptic system in harsh environments is further ensured. LiNbO3 was chosen as the E-O material because of its stability at high temperatures (phase-transition temperature of more than 1000 C) and maturity of E-O device technology. Further theoretical calculation was conducted to provide the optimal interaction length and device capacitance.

  17. Thermally stable dielectric responses in uniaxially (001)-oriented CaBi4Ti4O15 nanofilms grown on a Ca2Nb3O10- nanosheet seed layer

    Science.gov (United States)

    Kimura, Junichi; Takuwa, Itaru; Matsushima, Masaaki; Shimizu, Takao; Uchida, Hiroshi; Kiguchi, Takanori; Shiraishi, Takahisa; Konno, Toyohiko J.; Shibata, Tatsuo; Osada, Minoru; Sasaki, Takayoshi; Funakubo, Hiroshi

    2016-02-01

    To realize a high-temperature capacitor, uniaxially (001)-oriented CaBi4Ti4O15 films with various film thicknesses were prepared on (100)cSrRuO3/Ca2Nb3O10- nanosheet/glass substrates. As the film thickness decreases to 50 nm, the out-of-plane lattice parameters decrease while the in-plane lattice ones increase due to the in-plane tensile strain. However, the relative dielectric constant (ɛr) at room temperature exhibits a negligible degradation as the film thickness decreases to 50 nm, suggesting that ɛr of (001)-oriented CaBi4Ti4O15 is less sensitive to the residual strain. The capacitance density increases monotonously with decreasing film thickness, reaching a value of 4.5 μF/cm2 for a 50-nm-thick nanofilm, and is stable against temperature changes from room temperature to 400 °C irrespective of film thickness. This behaviour differs from that of the widely investigated perovskite-structured dielectrics. These results show that (001)-oriented CaBi4Ti4O15 films derived using Ca2Nb3O10- nanosheets as seed layers can be made candidates for high-temperature capacitor applications by a small change in the dielectric properties against film thickness and temperature variations.

  18. Frequency Stabilization of a Waveguide Laser Using Pound-Drever-Hall

    National Research Council Canada - National Science Library

    Fanto, Michael; Malowicki, John; Bussjager, Rebecca J; Repak, Paul; Kramer, Kelly; Casimir, Daniel; Hayduk, Michael J

    2006-01-01

    The generation of ultra-stable model-locked pulses in the 1550 regime is required for high resolution signal processing applications that include electro-optic sampling, transient probes, and optical clocks...

  19. Defining fish community structure in Lake Winnipeg using stable isotopes (δ{sup 13}C, δ{sup 15}N, δ{sup 34}S): Implications for monitoring ecological responses and trophodynamics of mercury and other trace elements

    Energy Technology Data Exchange (ETDEWEB)

    Ofukany, Amy F.A. [Toxicology Centre, University of Saskatchewan, 44 Campus Drive, Saskatoon, Saskatchewan S7N 5B3 (Canada); Wassenaar, Leonard I. [Environment Canada, 11 Innovation Boulevard, Saskatoon, Saskatchewan S7N 3H5 (Canada); Bond, Alexander L., E-mail: alex.bond@rspb.org.uk [Environment Canada, 11 Innovation Boulevard, Saskatoon, Saskatchewan S7N 3H5 (Canada); Hobson, Keith A. [Environment Canada, 11 Innovation Boulevard, Saskatoon, Saskatchewan S7N 3H5 (Canada)

    2014-11-01

    The ecological integrity of freshwater lakes is influenced by atmospheric and riverine deposition of contaminants, shoreline development, eutrophication, and the introduction of non-native species. Changes to the trophic structure of Lake Winnipeg, Canada, and consequently, the concentrations of contaminants and trace elements measured in tissues of native fishes, are likely attributed to agricultural runoff from the 977,800 km{sup 2} watershed and the arrival of non-native zooplankters and fishes. We measured δ{sup 13}C, δ{sup 15}N, and δ{sup 34}S along with concentrations of 15 trace elements in 17 native fishes from the north and south basins of Lake Winnipeg in 2009 and 2010. After adjusting for differences in isotopic baseline values between the two basins, fishes in the south basin had consistently higher δ{sup 13}C and δ{sup 34}S, and lower δ{sup 15}N. We found little evidence of biomagnification of trace elements at the community level, but walleye (Sander vitreus) and freshwater drum (Aplodinotus grunniens) had higher mercury and selenium concentrations with increased trophic position, coincident with increased piscivory. There was evidence of growth dilution of cobalt, copper, manganese, molybdenum, thallium, and vanadium, and bioaccumulation of mercury, which could be explained by increases in algal (and consequently, lake and fish) productivity. We conclude that the north and south basins of Lake Winnipeg represent very different communities with different trophic structures and trace element concentrations. - Highlights: • Anthropogenic eutrophication and non-native species affect Lake Winnipeg’s ecosystem. • We measured stable isotopes and trace elements in 15 native fish species. • There was more evidence for growth dilution than biomagnification for most elements. • The trophic structures of the north and south basins were different. • These results will help determine the effects of recent arrival of zebra mussels.

  20. Defining fish community structure in Lake Winnipeg using stable isotopes (δ13C, δ15N, δ34S): Implications for monitoring ecological responses and trophodynamics of mercury and other trace elements

    International Nuclear Information System (INIS)

    Ofukany, Amy F.A.; Wassenaar, Leonard I.; Bond, Alexander L.; Hobson, Keith A.

    2014-01-01

    The ecological integrity of freshwater lakes is influenced by atmospheric and riverine deposition of contaminants, shoreline development, eutrophication, and the introduction of non-native species. Changes to the trophic structure of Lake Winnipeg, Canada, and consequently, the concentrations of contaminants and trace elements measured in tissues of native fishes, are likely attributed to agricultural runoff from the 977,800 km 2 watershed and the arrival of non-native zooplankters and fishes. We measured δ 13 C, δ 15 N, and δ 34 S along with concentrations of 15 trace elements in 17 native fishes from the north and south basins of Lake Winnipeg in 2009 and 2010. After adjusting for differences in isotopic baseline values between the two basins, fishes in the south basin had consistently higher δ 13 C and δ 34 S, and lower δ 15 N. We found little evidence of biomagnification of trace elements at the community level, but walleye (Sander vitreus) and freshwater drum (Aplodinotus grunniens) had higher mercury and selenium concentrations with increased trophic position, coincident with increased piscivory. There was evidence of growth dilution of cobalt, copper, manganese, molybdenum, thallium, and vanadium, and bioaccumulation of mercury, which could be explained by increases in algal (and consequently, lake and fish) productivity. We conclude that the north and south basins of Lake Winnipeg represent very different communities with different trophic structures and trace element concentrations. - Highlights: • Anthropogenic eutrophication and non-native species affect Lake Winnipeg’s ecosystem. • We measured stable isotopes and trace elements in 15 native fish species. • There was more evidence for growth dilution than biomagnification for most elements. • The trophic structures of the north and south basins were different. • These results will help determine the effects of recent arrival of zebra mussels

  1. Prophylactic Herpes Simplex Virus 2 (HSV-2) Vaccines Adjuvanted with Stable Emulsion and Toll-Like Receptor 9 Agonist Induce a Robust HSV-2-Specific Cell-Mediated Immune Response, Protect against Symptomatic Disease, and Reduce the Latent Viral Reservoir.

    Science.gov (United States)

    Hensel, Michael T; Marshall, Jason D; Dorwart, Michael R; Heeke, Darren S; Rao, Eileen; Tummala, Padmaja; Yu, Li; Cohen, Gary H; Eisenberg, Roselyn J; Sloan, Derek D

    2017-05-01

    Several prophylactic vaccines targeting herpes simplex virus 2 (HSV-2) have failed in the clinic to demonstrate sustained depression of viral shedding or protection from recurrences. Although these vaccines have generated high titers of neutralizing antibodies (NAbs), their induction of robust CD8 T cells has largely been unreported, even though evidence for the importance of HSV-2 antigen-specific CD8 T cells is mounting in animal models and in translational studies involving subjects with active HSV-2-specific immune responses. We developed a subunit vaccine composed of the NAb targets gD and gB and the novel T cell antigen and tegument protein UL40, and we compared this vaccine to a whole-inactivated-virus vaccine (formaldehyde-inactivated HSV-2 [FI-HSV-2]). We evaluated different formulations in combination with several Th1-inducing Toll-like receptor (TLR) agonists in vivo In mice, the TLR9 agonist cytosine-phosphate-guanine (CpG) oligodeoxynucleotide formulated in a squalene-based oil-in-water emulsion promoted most robust, functional HSV-2 antigen-specific CD8 T cell responses and high titers of neutralizing antibodies, demonstrating its superiority to vaccines adjuvanted by monophosphoryl lipid A (MPL)-alum. We further established that FI-HSV-2 alone or in combination with adjuvants as well as adjuvanted subunit vaccines were successful in the induction of NAbs and T cell responses in guinea pigs. These immunological responses were coincident with a suppression of vaginal HSV-2 shedding, low lesion scores, and a reduction in latent HSV-2 DNA in dorsal root ganglia to undetectable levels. These data support the further preclinical and clinical development of prophylactic HSV-2 vaccines that contain appropriate antigen and adjuvant components responsible for programming elevated CD8 T cell responses. IMPORTANCE Millions of people worldwide are infected with herpes simplex virus 2 (HSV-2), and to date, an efficacious prophylactic vaccine has not met the rigors

  2. Toward Practical Secure Stable Matching

    Directory of Open Access Journals (Sweden)

    Riazi M. Sadegh

    2017-01-01

    Full Text Available The Stable Matching (SM algorithm has been deployed in many real-world scenarios including the National Residency Matching Program (NRMP and financial applications such as matching of suppliers and consumers in capital markets. Since these applications typically involve highly sensitive information such as the underlying preference lists, their current implementations rely on trusted third parties. This paper introduces the first provably secure and scalable implementation of SM based on Yao’s garbled circuit protocol and Oblivious RAM (ORAM. Our scheme can securely compute a stable match for 8k pairs four orders of magnitude faster than the previously best known method. We achieve this by introducing a compact and efficient sub-linear size circuit. We even further decrease the computation cost by three orders of magnitude by proposing a novel technique to avoid unnecessary iterations in the SM algorithm. We evaluate our implementation for several problem sizes and plan to publish it as open-source.

  3. Towards stable acceleration in LINACS

    CERN Document Server

    Dubrovskiy, A D

    2014-01-01

    Ultra-stable and -reproducible high-energy particle beams with short bunches are needed in novel linear accelerators and, in particular, in the Compact Linear Collider CLIC. A passive beam phase stabilization system based on a bunch compression with a negative transfer matrix element R56 and acceleration at a positive off-crest phase is proposed. The motivation and expected advantages of the proposed scheme are outlined.

  4. Quantification of stable isotope label in metabolites via mass spectrometry.

    Science.gov (United States)

    Huege, Jan; Goetze, Jan; Dethloff, Frederik; Junker, Bjoern; Kopka, Joachim

    2014-01-01

    Isotope labelling experiments with stable or radioactive isotopes have long been an integral part of biological and medical research. Labelling experiments led to the discovery of new metabolic pathways and made it possible to calculate the fluxes responsible for a metabolic phenotype, i.e., the qualitative and quantitative composition of metabolites in a biological system. Prerequisite for efficient isotope labelling experiments is a reliable and precise method to analyze the redistribution of isotope label in a metabolic network. Here we describe the use of the CORRECTOR program, which utilizes matrix calculations to correct mass spectral data from stable isotope labelling experiments for the distorting effect of naturally occurring stable isotopes (NOIs). CORRECTOR facilitates and speeds up the routine quantification of experimentally introduced isotope label from multiple mass spectral readouts, which are generated by routine metabolite profiling when combined with stable isotope labelling experiments.

  5. Programmed death 1 is highly expressed on CD8+CD57+T cells in patients with stable multiple sclerosis and inhibits their cytotoxic response to Epstein-Barr virus.

    Science.gov (United States)

    Cencioni, Maria T; Magliozzi, Roberta; Nicholas, Richard; Ali, Rehiana; Malik, Omar; Reynolds, Richard; Borsellino, Giovanna; Battistini, Luca; Muraro, Paolo A

    2017-12-01

    Growing evidence points to a deregulated response to Epstein-Barr virus (EBV) in the central nervous system of patients with multiple sclerosis (MS) as a possible cause of disease. We have investigated the response of a subpopulation of effector CD8 + T cells to EBV in 36 healthy donors and in 35 patients with MS in active and inactive disease. We have measured the expression of markers of degranulation, the release of cytokines, cytotoxicity and the regulation of effector functions by inhibitory receptors, such as programmed death 1 (PD-1) and human inhibitor receptor immunoglobulin-like transcript 2 (ILT2). We demonstrate that polyfunctional cytotoxic CD8 + CD57 + T cells are able to kill EBV-infected cells in healthy donors. In contrast, an anergic exhaustion-like phenotype of CD8 + CD57 + T cells with high expression of PD-1 was observed in inactive patients with MS compared with active patients with MS or healthy donors. Detection of CD8 + CD57 + T cells in meningeal inflammatory infiltrates from post-mortem MS tissue confirmed the association of this cell phenotype with the disease pathological process. The overall results suggest that ineffective immune control of EBV in patietns with MS during remission may be one factor preceding and enabling the reactivation of the virus in the central nervous system and may cause exacerbation of the disease. © 2017 John Wiley & Sons Ltd.

  6. IL-1Β enriched monocytes mount massive IL-6 responses to common inflammatory triggers among chronically HIV-1 infected adults on stable anti-retroviral therapy at risk for cardiovascular disease.

    Directory of Open Access Journals (Sweden)

    Emilie Jalbert

    Full Text Available Chronic infection by HIV increases the risk of cardiovascular disease (CVD despite effective antiretroviral therapy (ART. The mechanisms linking HIV to CVD have yet to be fully elucidated. High plasma levels of the pro-inflammatory cytokine IL-6, which may be triggered by IL-1β, is a biomarker of CVD risk in HIV-negative adults, and of all-cause mortality in HIV disease. Monocytes play a pivotal role in atherosclerosis, and may be major mediators of HIV-associated inflammation. We therefore hypothesized that monocytes from HIV-infected adults would display high inflammatory responses. Employing a 10-color flow cytometry intracellular cytokine staining assay, we directly assessed cytokine and chemokine responses of monocytes from the cryopreserved peripheral blood of 33 chronically HIV-1 infected subjects. Participants were 45 years or older, on virologically suppressive ART and at risk for CVD. This group was compared to 14 HIV-negative subjects matched for age and gender, with similar CVD risk. We simultaneously detected intracellular expression of IL-1β, IL-6, IL-8 and TNF in blood monocytes in the basal state and after stimulation by triggers commonly found in the blood of treated, chronically HIV-infected subjects: lipopolysaccharide (LPS and oxidized low-density lipoprotein (oxLDL. In the absence of stimulation, monocytes from treated HIV-infected subjects displayed a high frequency of cells producing IL-1β (median 19.5%, compared to low levels in HIV-uninfected persons (0.9% p<0.0001. IL-8, which is induced by IL-1β, was also highly expressed in the HIV-infected group in the absence of stimulation, 43.7% compared to 1.9% in HIV-uninfected subjects, p<0.0001. Strikingly, high basal expression of IL-1β by monocytes predicted high IL-6 levels in the plasma, and high monocyte IL-6 responses in HIV-infected subjects. Hyper-inflammatory IL-1β enriched monocytes may be a major source of IL-6 production and systemic inflammation in HIV

  7. IL-1Β enriched monocytes mount massive IL-6 responses to common inflammatory triggers among chronically HIV-1 infected adults on stable anti-retroviral therapy at risk for cardiovascular disease.

    Science.gov (United States)

    Jalbert, Emilie; Crawford, Timothy Q; D'Antoni, Michelle L; Keating, Sheila M; Norris, Philip J; Nakamoto, Beau K; Seto, Todd; Parikh, Nisha I; Shikuma, Cecilia M; Ndhlovu, Lishomwa C; Barbour, Jason D

    2013-01-01

    Chronic infection by HIV increases the risk of cardiovascular disease (CVD) despite effective antiretroviral therapy (ART). The mechanisms linking HIV to CVD have yet to be fully elucidated. High plasma levels of the pro-inflammatory cytokine IL-6, which may be triggered by IL-1β, is a biomarker of CVD risk in HIV-negative adults, and of all-cause mortality in HIV disease. Monocytes play a pivotal role in atherosclerosis, and may be major mediators of HIV-associated inflammation. We therefore hypothesized that monocytes from HIV-infected adults would display high inflammatory responses. Employing a 10-color flow cytometry intracellular cytokine staining assay, we directly assessed cytokine and chemokine responses of monocytes from the cryopreserved peripheral blood of 33 chronically HIV-1 infected subjects. Participants were 45 years or older, on virologically suppressive ART and at risk for CVD. This group was compared to 14 HIV-negative subjects matched for age and gender, with similar CVD risk. We simultaneously detected intracellular expression of IL-1β, IL-6, IL-8 and TNF in blood monocytes in the basal state and after stimulation by triggers commonly found in the blood of treated, chronically HIV-infected subjects: lipopolysaccharide (LPS) and oxidized low-density lipoprotein (oxLDL). In the absence of stimulation, monocytes from treated HIV-infected subjects displayed a high frequency of cells producing IL-1β (median 19.5%), compared to low levels in HIV-uninfected persons (0.9% p<0.0001). IL-8, which is induced by IL-1β, was also highly expressed in the HIV-infected group in the absence of stimulation, 43.7% compared to 1.9% in HIV-uninfected subjects, p<0.0001. Strikingly, high basal expression of IL-1β by monocytes predicted high IL-6 levels in the plasma, and high monocyte IL-6 responses in HIV-infected subjects. Hyper-inflammatory IL-1β enriched monocytes may be a major source of IL-6 production and systemic inflammation in HIV-infected adults

  8. Stable Hemiaminals: 2-Aminopyrimidine Derivatives

    Directory of Open Access Journals (Sweden)

    Anna Kwiecień

    2015-08-01

    Full Text Available Stable hemiaminals can be obtained in the one-pot reaction between 2-aminopyrimidine and nitrobenzaldehyde derivatives. Ten new hemiaminals have been obtained, six of them in crystal state. The molecular stability of these intermediates results from the presence of both electron-withdrawing nitro groups as substituents on the phenyl ring and pyrimidine ring, so no further stabilisation by intramolecular interaction is required. Hemiaminal molecules possess a tetrahedral carbon atom constituting a stereogenic centre. As the result of crystallisation in centrosymmetric space groups both enantiomers are present in the crystal structure.

  9. Organic synthesis with stable isotopes

    International Nuclear Information System (INIS)

    Daub, G.H.; Kerr, V.N.; Williams, D.L.; Whaley, T.W.

    1978-01-01

    Some general considerations concerning organic synthesis with stable isotopes are presented. Illustrative examples are described and discussed. The examples include DL-2-amino-3-methyl- 13 C-butanoic-3,4- 13 C 2 acid (DL-valine- 13 C 3 ); methyl oleate-1- 13 C; thymine-2,6- 13 C 2 ; 2-aminoethanesulfonic- 13 C acid (taurine- 13 C); D-glucose-6- 13 C; DL-2-amino-3-methylpentanoic-3,4- 13 C 2 acid (DL-isoleucine- 13 C 2 ); benzidine- 15 N 2 ; and 4-ethylsulfonyl-1-naphthalene-sulfonamide- 15 N

  10. Stable agents for imaging investigations

    International Nuclear Information System (INIS)

    Tofe, A.J.

    1976-01-01

    This invention concerns highly stable compounds useful in preparing technetium 99m based scintiscanning exploration agents. The compounds of this invention include a pertechnetate reducing agent or a solution of oxidized pertechnetate and an efficient proportion, sufficient to stabilize the compounds in the presence of oxygen and of radiolysis products, of ascorbic acid or a pharmaceutically acceptable salt or ester of this acid. The invention also concerns a perfected process for preparing a technetium based exploration agent, consisting in codissolving the ascorbic acid or a pharmaceutically acceptable salt or ester of such an acid and a pertechnetate reducing agent in a solution of oxidized pertechnetate [fr

  11. Respiratory depression by stable xenon in goats

    International Nuclear Information System (INIS)

    Winkler, S.S.

    1986-01-01

    Regional cerebral blood flow (rCBF) studies with stable xenon have recently become practical. Xenon pharmacology is thus a more than academic interest. The authors studied the respiratory response of three trained goats to a mixture of 70% xenon, 30% oxygen. The relatively high xenon concentration was used because of the animals' resistance to anesthetic effects. Two other goats were treated with equivalent anesthetic concentration of nitrous oxide and halothane. The xenon-treated animals showed respiratory depression, in contrast to the stimulating effects observed with halothane and nitrous oxide. Elevation of PaCO/sub 2/ was significant and would substantially increase cRBF. Their findings emphasize the need to monitor ventilation and respond appropriately if necessary

  12. Real-time multi-target ranging based on chaotic polarization laser radars in the drive-response VCSELs.

    Science.gov (United States)

    Zhong, Dongzhou; Xu, Geliang; Luo, Wei; Xiao, Zhenzhen

    2017-09-04

    According to the principle of complete chaos synchronization and the theory of Hilbert phase transformation, we propose a novel real-time multi-target ranging scheme by using chaotic polarization laser radar in the drive-response vertical-cavity surface-emitting lasers (VCSELs). In the scheme, to ensure each polarization component (PC) of the master VCSEL (MVCSEL) to be synchronized steadily with that of the slave VCSEL, the output x-PC and y-PC from the MVCSEL in the drive system and those in the response system are modulated by the linear electro-optic effect simultaneously. Under this condition, by simulating the influences of some key parameters of the system on the synchronization quality and the relative errors of the two-target ranging, related operating parameters can be optimized. The x-PC and the y-PC, as two chaotic radar sources, are used to implement the real-time ranging for two targets. It is found that the measured distances of the two targets at arbitrary position exhibit strong real-time stability and only slight jitter. Their resolutions are up to millimeters, and their relative errors are very small and less than 2.7%.

  13. Development of stable marker-free nuclear transformation strategy ...

    African Journals Online (AJOL)

    To avoid the negative effects caused by the marker genes, we tried to develop a stable marker-free nuclear transformation system in Chlorella. For this, linear gene expression cassettes (LGEC) were constructed with functional domains, which are responsible for transformation, of SV40 large T antigen. The LGECs were ...

  14. Stable cosmology in chameleon bigravity

    Science.gov (United States)

    De Felice, Antonio; Mukohyama, Shinji; Oliosi, Michele; Watanabe, Yota

    2018-02-01

    The recently proposed chameleonic extension of bigravity theory, by including a scalar field dependence in the graviton potential, avoids several fine-tunings found to be necessary in usual massive bigravity. In particular it ensures that the Higuchi bound is satisfied at all scales, that no Vainshtein mechanism is needed to satisfy Solar System experiments, and that the strong coupling scale is always above the scale of cosmological interest all the way up to the early Universe. This paper extends the previous work by presenting a stable example of cosmology in the chameleon bigravity model. We find a set of initial conditions and parameters such that the derived stability conditions on general flat Friedmann background are satisfied at all times. The evolution goes through radiation-dominated, matter-dominated, and de Sitter eras. We argue that the parameter space allowing for such a stable evolution may be large enough to encompass an observationally viable evolution. We also argue that our model satisfies all known constraints due to gravitational wave observations so far and thus can be considered as a unique testing ground of gravitational wave phenomenologies in bimetric theories of gravity.

  15. One Clock-Cycle Response 0.5 m CMOS Dual-Mode ΣΔ DC-DC Bypass Boost Converter Stable over Wide ESRLC Variations

    Directory of Open Access Journals (Sweden)

    Neeraj A. Keskar

    2010-01-01

    Full Text Available Power supplies in portable applications must not only conform and adapt to their highly integrated on-chip and in-package environments but also, more intrinsically, respond quickly to fast load dumps to achieve and maintain high accuracy. The frequency-compensation network, however, limits speed and regulation performance because it must cater to all combinations of filter capacitor , inductor L, and 's equivalent series resistance ESR resulting from tolerance and modal design targets. As such, it must compensate the worst-case condition and therefore restrain the performance of all other possible scenarios, even if the likelihood of occurrence of the latter is considerably high and the former substantially low. Sigma-delta (ΣΔ control, which addresses this issue in buck converters by easing its compensation requirements and offering one-cycle transient response, has not been able to simultaneously achieve high bandwidth, high accuracy, and wide ESRLC compliance in boost converters. This paper presents a dual-mode ΣΔ boost bypass converter, which by using a high-bandwidth bypass path only during transient load-dump events was experimentally 1.41 to 6 times faster than the state of the art in current-mode ΣΔ boost supplies, and this without any compromise in ESRLC compliance range (0–50 mΩ, 1–30 H, and 1–350 F.

  16. Stable isotope mass spectrometry in petroleum exploration

    International Nuclear Information System (INIS)

    Mathur, Manju

    1997-01-01

    The stable isotope mass spectrometry plays an important role to evaluate the stable isotopic composition of hydrocarbons. The isotopic ratios of certain elements in petroleum samples reflect certain characteristics which are useful for petroleum exploration

  17. Uses of stable isotopes in fish ecology

    Science.gov (United States)

    Analyses of fish tissues (other than otoliths) for stable isotope ratios can provide substantial information on fish ecology, including physiological ecology. Stable isotopes of nitrogen and carbon frequently are used to determine the mix of diet sources for consumers. Stable i...

  18. Periodicity of the stable isotopes

    CERN Document Server

    Boeyens, J C A

    2003-01-01

    It is demonstrated that all stable (non-radioactive) isotopes are formally interrelated as the products of systematically adding alpha particles to four elementary units. The region of stability against radioactive decay is shown to obey a general trend based on number theory and contains the periodic law of the elements as a special case. This general law restricts the number of what may be considered as natural elements to 100 and is based on a proton:neutron ratio that matches the golden ratio, characteristic of biological and crystal growth structures. Different forms of the periodic table inferred at other proton:neutron ratios indicate that the electronic configuration of atoms is variable and may be a function of environmental pressure. Cosmic consequences of this postulate are examined. (author)

  19. Stable States of Biological Organisms

    Science.gov (United States)

    Yukalov, V. I.; Sornette, D.; Yukalova, E. P.; Henry, J.-Y.; Cobb, J. P.

    2009-04-01

    A novel model of biological organisms is advanced, treating an organism as a self-consistent system subject to a pathogen flux. The principal novelty of the model is that it describes not some parts, but a biological organism as a whole. The organism is modeled by a five-dimensional dynamical system. The organism homeostasis is described by the evolution equations for five interacting components: healthy cells, ill cells, innate immune cells, specific immune cells, and pathogens. The stability analysis demonstrates that, in a wide domain of the parameter space, the system exhibits robust structural stability. There always exist four stable stationary solutions characterizing four qualitatively differing states of the organism: alive state, boundary state, critical state, and dead state.

  20. Theory of stable allocations II

    Directory of Open Access Journals (Sweden)

    Pantelić Svetlana

    2015-01-01

    Full Text Available The Swedish Royal Academy awarded the 2012 Nobel Prize in Economics to Lloyd Shapley and Alvin Roth, for the theory of stable allocations and the practice of market design. These two American researchers worked independently from each other, combining basic theory and empirical investigations. Through their experiments and practical design they generated a flourishing field of research and improved the performance of many markets. Shapley provided the fundamental theoretical contribution to this field of research, whereas Roth, a professor at the Harvard University in Boston, developed and upgraded these theoretical investigations by applying them to the American market of medical doctors. Namely, their research helps explain the market processes at work, for instance, when doctors are assigned to hospitals, students to schools and human organs for transplant to recipients.

  1. Stable massive particles at colliders

    Energy Technology Data Exchange (ETDEWEB)

    Fairbairn, M.; /Stockholm U.; Kraan, A.C.; /Pennsylvania U.; Milstead, D.A.; /Stockholm U.; Sjostrand, T.; /Lund U.; Skands, P.; /Fermilab; Sloan, T.; /Lancaster U.

    2006-11-01

    We review the theoretical motivations and experimental status of searches for stable massive particles (SMPs) which could be sufficiently long-lived as to be directly detected at collider experiments. The discovery of such particles would address a number of important questions in modern physics including the origin and composition of dark matter in the universe and the unification of the fundamental forces. This review describes the techniques used in SMP-searches at collider experiments and the limits so far obtained on the production of SMPs which possess various colour, electric and magnetic charge quantum numbers. We also describe theoretical scenarios which predict SMPs, the phenomenology needed to model their production at colliders and interactions with matter. In addition, the interplay between collider searches and open questions in cosmology such as dark matter composition are addressed.

  2. Stable propagation of interacting crack systems and modeling of damage

    International Nuclear Information System (INIS)

    Bazant, Z.P.; Tabbara, M.R.

    1989-01-01

    This paper presents general thermodynamic criteria for the stable states and stable path of structures with an interacting system of cracks. In combination with numerical finite element results for various cracked structure geometries, these criteria indicate that the crack response path of structures may exhibit bifurcations, after which the symmetry of the crack system is broken and some cracks grow preferentially. The problem is of interest for the prediction of ultimate loads, ductility and energy absorption capability of nuclear concrete structures as well as structures made of composites and ceramics

  3. Dynamics and control of twisting bi-stable structures

    Science.gov (United States)

    Arrieta, Andres F.; van Gemmeren, Valentin; Anderson, Aaron J.; Weaver, Paul M.

    2018-02-01

    Compliance-based morphing structures have the potential to offer large shape adaptation, high stiffness and low weight, while reducing complexity, friction, and scalability problems of mechanism based systems. A promising class of structure that enables these characteristics are multi-stable structures given their ability to exhibit large deflections and rotations without the expensive need for continuous actuation, with the latter only required intermittently. Furthermore, multi-stable structures exhibit inherently fast response due to the snap-through instability governing changes between stable states, enabling rapid configuration switching between the discrete number of programmed shapes of the structure. In this paper, the design and utilisation of the inherent nonlinear dynamics of bi-stable twisting I-beam structures for actuation with low strain piezoelectric materials is presented. The I-beam structure consists of three compliant components assembled into a monolithic single element, free of moving parts, and showing large deflections between two stable states. Finite element analysis is utilised to uncover the distribution of strain across the width of the flange, guiding the choice of positioning for piezoelectric actuators. In addition, the actuation authority is maximised by calculating the generalised coupling coefficient for different positions of the piezoelectric actuators. The results obtained are employed to tailor and test I-beam designs exhibiting desired large deflection between stable states, while still enabling the activation of snap-through with the low strain piezoelectric actuators. To this end, the dynamic response of the I-beams to piezoelectric excitation is investigated, revealing that resonant excitations are insufficient to dynamically trigger snap-through. A novel bang-bang control strategy, which exploits the nonlinear dynamics of the structure successfully triggers both single and constant snap-through between the stable states

  4. Fast response dual frequency liquid crystal materials

    Science.gov (United States)

    Song, Qiong

    terphenyls exhibit a high birefringence, fairly low viscosity, and modest dielectric anisotropy, but their molecular alignment in a VA cell is gradually deteriorated at elevated temperatures as their concentration increases. As a result, the device contrast ratio is decreased noticeably due to the light leakage through the crossed polarizers. Finally, liquid crystal doped with metallic nanoparticles, such as Pd, Ag, or Ag-Pd, which are protected with ligand molecules, such as nematic liquid crystal were studied. The metal nanoparticles doped LC exhibit a frequency modulation (FM) electro-optical (EO) response in the millisecond to submillisecond range together with the ordinary root-mean-square voltage response.

  5. Stable Treemaps via Local Moves.

    Science.gov (United States)

    Sondag, Max; Speckmann, Bettina; Verbeek, Kevin

    2018-01-01

    Treemaps are a popular tool to visualize hierarchical data: items are represented by nested rectangles and the area of each rectangle corresponds to the data being visualized for this item. The visual quality of a treemap is commonly measured via the aspect ratio of the rectangles. If the data changes, then a second important quality criterion is the stability of the treemap: how much does the treemap change as the data changes. We present a novel stable treemapping algorithm that has very high visual quality. Whereas existing treemapping algorithms generally recompute the treemap every time the input changes, our algorithm changes the layout of the treemap using only local modifications. This approach not only gives us direct control over stability, but it also allows us to use a larger set of possible layouts, thus provably resulting in treemaps of higher visual quality compared to existing algorithms. We further prove that we can reach all possible treemap layouts using only our local modifications. Furthermore, we introduce a new measure for stability that better captures the relative positions of rectangles. We finally show via experiments on real-world data that our algorithm outperforms existing treemapping algorithms also in practice on either visual quality and/or stability. Our algorithm scores high on stability regardless of whether we use an existing stability measure or our new measure.

  6. Towards stable cyanobacterial cell factories

    NARCIS (Netherlands)

    Du, W.

    2018-01-01

    Irrespective of where we come from, we all share the global responsibility of ensuring that our societies are sustainable. We have been depleting the world’s resources and filling the atmosphere with abnormal levels of CO2. But CO2 can also be used as a resource - plants and certain microbes have

  7. Adaptive governance : Towards a stable, accountable and responsive government

    NARCIS (Netherlands)

    Janssen, M.F.W.H.A.; van der Voort, H.G.

    2016-01-01

    Organizations are expected to adapt within a short time to deal with changes that might become disruptive if not adequately dealt with. Yet many organizations are unable to adapt effectively or quickly due to the established institutional arrangements and patterns of decision-making and

  8. Stable carbon isotope response to oceanic anoxic events

    International Nuclear Information System (INIS)

    Hu Xiumian; Wang Chengshan; Li Xianghui

    2001-01-01

    Based on discussion of isotope compositions and fractionation of marine carbonate and organic carbon, the author studies the relationship between oceanic anoxic events and changes in the carbon isotope fractionation of both carbonate and organic matter. During the oceanic anoxic events, a great number of organisms were rapidly buried, which caused a kind of anoxic conditions by their decomposition consuming dissolved oxygen. Since 12 C-rich organism preserved, atmosphere-ocean system will enrich relatively of 13 C. As a result, simultaneous marine carbonate will record the positive excursion of carbon isotope. There is a distinctive δ 13 C excursion during oceanic anoxic events in the world throughout the geological time. In the Cenomanian-Turonian anoxic event. this positive excursion arrived at ∼0.2% of marine carbonate and at ∼0.4% of organic matter, respectively. Variations in the carbon isotopic compositions of marine carbonate and organic carbon record the changes in the fraction of organic carbon buried throughout the geological time and may provide clues to the changes in rates of weathering and burial of organic carbon. This will provide a possibility of interpreting not only the changes in the global carbon cycle throughout the geological time, but also that in atmospheric p CO 2

  9. Detection of thyroid hormone receptor disruptors by a novel stable in vitro reporter gene assay

    NARCIS (Netherlands)

    Freitas, de J.; Cano, P.; Craig-Veit, C.; Goodson, M.L.; Furlow, J.D.; Murk, A.J.

    2011-01-01

    A stable luciferase reporter gene assay was developed based on the thyroid hormone responsive rat pituitary tumor GH3 cell line that constitutively expresses both thyroid hormone receptor isoforms. Stable transfection of the pGL4CP-SV40-2xtaDR4 construct into the GH3 cells resulted in a highly

  10. Advanced thermally stable jet fuels

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.

    1999-01-31

    The Pennsylvania State University program in advanced thermally stable coal-based jet fuels has five broad objectives: (1) Development of mechanisms of degradation and solids formation; (2) Quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) Characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) Elucidation of the role of additives in retarding the formation of carbonaceous solids; (5) Assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal. Future high-Mach aircraft will place severe thermal demands on jet fuels, requiring the development of novel, hybrid fuel mixtures capable of withstanding temperatures in the range of 400--500 C. In the new aircraft, jet fuel will serve as both an energy source and a heat sink for cooling the airframe, engine, and system components. The ultimate development of such advanced fuels requires a thorough understanding of the thermal decomposition behavior of jet fuels under supercritical conditions. Considering that jet fuels consist of hundreds of compounds, this task must begin with a study of the thermal degradation behavior of select model compounds under supercritical conditions. The research performed by The Pennsylvania State University was focused on five major tasks that reflect the objectives stated above: Task 1: Investigation of the Quantitative Degradation of Fuels; Task 2: Investigation of Incipient Deposition; Task 3: Characterization of Solid Gums, Sediments, and Carbonaceous Deposits; Task 4: Coal-Based Fuel Stabilization Studies; and Task 5: Exploratory Studies on the Direct Conversion of Coal to High Quality Jet Fuels. The major findings of each of these tasks are presented in this executive summary. A description of the sub-tasks performed under each of these tasks and the findings of those studies are provided in the remainder of this volume

  11. Population Games, Stable Games, and Passivity

    Directory of Open Access Journals (Sweden)

    Michael J. Fox

    2013-10-01

    Full Text Available The class of “stable games”, introduced by Hofbauer and Sandholm in 2009, has the attractive property of admitting global convergence to equilibria under many evolutionary dynamics. We show that stable games can be identified as a special case of the feedback-system-theoretic notion of a “passive” dynamical system. Motivated by this observation, we develop a notion of passivity for evolutionary dynamics that complements the definition of the class of stable games. Since interconnections of passive dynamical systems exhibit stable behavior, we can make conclusions about passive evolutionary dynamics coupled with stable games. We show how established evolutionary dynamics qualify as passive dynamical systems. Moreover, we exploit the flexibility of the definition of passive dynamical systems to analyze generalizations of stable games and evolutionary dynamics that include forecasting heuristics as well as certain games with memory.

  12. Dielectric Spectroscopy of Metal Nanoparticle Doped Liquid Crystal Displays ExhibitingFrequency Modulation Response

    Science.gov (United States)

    Kobayashi, Shunsuke; Miyama, Tomohiro; Nishida, Naoto; Sakai, Yoshio; Shiraki, Hiroyuki; Shiraishi, Yukihide; Toshima, Naoki

    2006-06-01

    Twisted nematic liquid crystal displays (TN-LCDs), doped with the nanoparticles of metal, such as Pd, Ag, or Ag-Pd, which are protected with ligand molecules, such as nematic liquid crystal, exhibit a frequency modulation (FM) electro-optical (EO) response with short response time of milliseconds (ms) or sub-ms order together with the ordinary rms voltage response. These devices are called FM/AM-TN-LCDs; they are distinct from the ordinary LCDs featured by the amplitude modulation (AM) response. The phenomena of the FM/AM LCDs may be attributed to the dielectric dispersion of a heterogeneous dielectric medium known as the Maxwell-Wagner effect. It is experimentally shown that the frequency range spreads from several tens hertz to several tens kilohertz and the spectrum is more or less centered about the dielectric relaxation frequency. We formulated a theory based on an equivalent circuit model to evaluate the dielectric relaxation frequency and the dielectric strengths; and we succeeded in explaining the dependence of the dielectric relaxation frequency on the concentration of nanoparticles and the their dielectric and electrical properties, whereas conventional theories based on electromagnetic theory are unable to explain this concentration dependence. This paper reports on the experimental results of the EO effects and the dielectric spectroscopy including the dielectric relaxation times and the dielectric strengths of nematic liquid crystal, 5CB (4-pentyl-4'-cyanobiphenyl), doped with the metal nanoparticles of Pd alone and Ag-Pd composite; and discusses how the observed dielectric relaxation frequency or dielectric relaxation time depend on the concentration of the doped nanoparticles and also their electrical and dielectric properties.

  13. Stable isotope tracers and exercise physiology: past, present and future.

    Science.gov (United States)

    Wilkinson, Daniel J; Brook, Matthew S; Smith, Kenneth; Atherton, Philip J

    2017-05-01

    Stable isotope tracers have been invaluable assets in physiological research for over 80 years. The application of substrate-specific stable isotope tracers has permitted exquisite insight into amino acid, fatty-acid and carbohydrate metabolic regulation (i.e. incorporation, flux, and oxidation, in a tissue-specific and whole-body fashion) in health, disease and response to acute and chronic exercise. Yet, despite many breakthroughs, there are limitations to 'substrate-specific' stable isotope tracers, which limit physiological insight, e.g. the need for intravenous infusions and restriction to short-term studies (hours) in controlled laboratory settings. In recent years significant interest has developed in alternative stable isotope tracer techniques that overcome these limitations, in particular deuterium oxide (D 2 O or heavy water). The unique properties of this tracer mean that through oral administration, the turnover and flux through a number of different substrates (muscle proteins, lipids, glucose, DNA (satellite cells)) can be monitored simultaneously and flexibly (hours/weeks/months) without the need for restrictive experimental control. This makes it uniquely suited for the study of 'real world' human exercise physiology (amongst many other applications). Moreover, using D 2 O permits evaluation of turnover of plasma and muscle proteins (e.g. dynamic proteomics) in addition to metabolomics (e.g. fluxomics) to seek molecular underpinnings, e.g. of exercise adaptation. Here, we provide insight into the role of stable isotope tracers, from substrate-specific to novel D 2 O approaches, in facilitating our understanding of metabolism. Further novel potential applications of stable isotope tracers are also discussed in the context of integration with the snowballing field of 'omic' technologies. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

  14. Gas phase thermal diffusion of stable isotopes

    International Nuclear Information System (INIS)

    Eck, C.F.

    1979-01-01

    The separation of stable isotopes at Mound Facility is reviewed from a historical perspective. The historical development of thermal diffusion from a laboratory process to a separation facility that handles all the noble gases is described. In addition, elementary thermal diffusion theory and elementary cascade theory are presented along with a brief review of the uses of stable isotopes

  15. physico-chemical and stable isotopes

    African Journals Online (AJOL)

    This paper details the mineralogical, chemical and stable isotope abundances of calcrete in the Letlhakeng fossil valley. The stable isotope abundances (O and C) of calcretes yielded some values which were tested against the nature of the calcretes – pedogenic or groundwater type. The Kgalagadi (Kalahari) is a vast ...

  16. Modelling stable atmospheric boundary layers over snow

    NARCIS (Netherlands)

    Sterk, H.A.M.

    2015-01-01

    Thesis entitled:

    Modelling Stable Atmospheric Boundary Layers over Snow

    H.A.M. Sterk

    Wageningen, 29th of April, 2015

    Summary

    The emphasis of this thesis is on the understanding and forecasting of the Stable Boundary Layer (SBL) over snow-covered surfaces. SBLs

  17. Modelling stable atmospheric boundary layers over snow

    NARCIS (Netherlands)

    Sterk, H.A.M.

    2015-01-01

    Thesis entitled: Modelling Stable Atmospheric Boundary Layers over Snow H.A.M. Sterk Wageningen, 29th of April, 2015 Summary The emphasis of this thesis is on the understanding and forecasting of the Stable Boundary Layer (SBL) over snow-covered surfaces. SBLs typically form at night and in polar

  18. Stable isotopes and biomarkers in microbial ecology

    NARCIS (Netherlands)

    Boschker, H.T.S.; Middelburg, J.J.

    2002-01-01

    The use of biomarkers in combination with stable isotope analysis is a new approach in microbial ecology and a number of papers on a variety of subjects have appeared. We will first discuss the techniques for analysing stable isotopes in biomarkers, primarily gas chromatography-combustion-isotope

  19. Stable Agrobacterium -mediated transformation of the halophytic ...

    African Journals Online (AJOL)

    Stable Agrobacterium-mediated transformation of the halophytic Leymus chinensis (Trin.) Yan-Lin Sun, Soon-Kwan Hong. Abstract. In this study, an efficient procedure for stable Agrobacterium-mediated transformation of Leymus chinensis (Trin.) was established. Agrobacterium tumefaciens strain EHA105, harboring a ...

  20. Structure of acid-stable carmine.

    Science.gov (United States)

    Sugimoto, Naoki; Kawasaki, Yoko; Sato, Kyoko; Aoki, Hiromitsu; Ichi, Takahito; Koda, Takatoshi; Yamazaki, Takeshi; Maitani, Tamio

    2002-02-01

    Acid-stable carmine has recently been distributed in the U.S. market because of its good acid stability, but it is not permitted in Japan. We analyzed and determined the structure of the major pigment in acid-stable carmine, in order to establish an analytical method for it. Carminic acid was transformed into a different type of pigment, named acid-stable carmine, through amination when heated in ammonia solution. The features of the structure were clarified using a model compound, purpurin, in which the orientation of hydroxyl groups on the A ring of the anthraquinone skeleton is the same as that of carminic acid. By spectroscopic means and the synthesis of acid-stable carmine and purpurin derivatives, the structure of the major pigment in acid-stable carmine was established as 4-aminocarminic acid, a novel compound.