WorldWideScience

Sample records for stable amide bonds

  1. Hydrogen bond stabilities in membrane-reconstituted alamethicin from amide-resolved hydrogen-exchange measurements.

    Science.gov (United States)

    Dempsey, C E; Handcock, L J

    1996-01-01

    Amide-resolved hydrogen-deuterium exchange-rate constants were measured for backbone amides of alamethicin reconstituted in dioleoylphosphatidylcholine vesicles by an exchange-trapping method combined with high-resolution nuclear magnetic resonance spectroscopy. In vesicles containing alamethicin at molar ratios between 1:20 and 1:100 relative to lipid, the exchange-rate constants increased with increasing volume of the D20 buffer in which the vesicles were suspended, indicating that exchange under these conditions is dominated by partitioning of the peptide into the aqueous phase. This was supported by observation of a linear relationship between the exchange-rate constants for amides in membrane-reconstituted alamethicin and those for amides in alamethicin dissolved directly into D2O buffer. Significant protection of amides from exchange with D2O buffer in membrane-reconstituted alamethicin is interpreted in terms of stabilization by helical hydrogen bonding. Under conditions in which amide exchange occurred by partitioning of the peptide into solution, only lower limits for hydrogen-bond stabilities in the membrane were determined; all the potentially hydrogen-bonded amides of alamethicin are at least 1000-fold exchange protected in the membrane-bound state. When partitioning of alamethicin into the aqueous phase was suppressed by hydration of reconstituted vesicles in a limiting volume of water [D2O:dioleoylphosphatidylcholine:alamethicin; 220:1:0.05; (M:M:M)], the exchange-protection factors exhibited helical periodicity with highly exchange-protected, and less well-protected, amides on the nonpolar and polar helix faces, respectively. The exchange data indicate that, under the conditions studied, alamethicin adopts a stable helical structure in DOPC bilayers in which all the potentially hydrogen-bonded amides are stabilized by helical hydrogen bonds. The protection factors define the orientation of the peptide helix with respect to an aqueous phase, which is

  2. Hydrogen bond stabilities in membrane-reconstituted alamethicin from amide-resolved hydrogen-exchange measurements.

    Science.gov (United States)

    Dempsey, C E; Handcock, L J

    1996-04-01

    Amide-resolved hydrogen-deuterium exchange-rate constants were measured for backbone amides of alamethicin reconstituted in dioleoylphosphatidylcholine vesicles by an exchange-trapping method combined with high-resolution nuclear magnetic resonance spectroscopy. In vesicles containing alamethicin at molar ratios between 1:20 and 1:100 relative to lipid, the exchange-rate constants increased with increasing volume of the D20 buffer in which the vesicles were suspended, indicating that exchange under these conditions is dominated by partitioning of the peptide into the aqueous phase. This was supported by observation of a linear relationship between the exchange-rate constants for amides in membrane-reconstituted alamethicin and those for amides in alamethicin dissolved directly into D2O buffer. Significant protection of amides from exchange with D2O buffer in membrane-reconstituted alamethicin is interpreted in terms of stabilization by helical hydrogen bonding. Under conditions in which amide exchange occurred by partitioning of the peptide into solution, only lower limits for hydrogen-bond stabilities in the membrane were determined; all the potentially hydrogen-bonded amides of alamethicin are at least 1000-fold exchange protected in the membrane-bound state. When partitioning of alamethicin into the aqueous phase was suppressed by hydration of reconstituted vesicles in a limiting volume of water [D2O:dioleoylphosphatidylcholine:alamethicin; 220:1:0.05; (M:M:M)], the exchange-protection factors exhibited helical periodicity with highly exchange-protected, and less well-protected, amides on the nonpolar and polar helix faces, respectively. The exchange data indicate that, under the conditions studied, alamethicin adopts a stable helical structure in DOPC bilayers in which all the potentially hydrogen-bonded amides are stabilized by helical hydrogen bonds. The protection factors define the orientation of the peptide helix with respect to an aqueous phase, which is

  3. Cp*Rh(III)/Bicyclic Olefin Cocatalyzed C-H Bond Amidation by Intramolecular Amide Transfer.

    Science.gov (United States)

    Wang, Xiaoming; Gensch, Tobias; Lerchen, Andreas; Daniliuc, Constantin G; Glorius, Frank

    2017-05-10

    A bicyclic olefin was discovered as a cocatalyst in a Cp*Rh(III)-catalyzed C-H bond amidation proceeding by an intramolecular amide transfer in N-phenoxyacetamide derivatives. Combining experimental and theoretical studies, we propose that the olefin promotes a Rh(III) intermediate to undergo oxidative addition into the O-N bond to form a Rh(V) nitrenoid species and subsequently direct the nitrenoid to add to the ortho position. The amide directing group plays a dual role as a cleavable coordinating moiety as well as an essential coupling partner for the C-H amidation. This methodology was successfully applied to the late-stage diversification of natural products and a marketed drug under mild conditions.

  4. Steroids linked with amide bond - extended cholesterol

    Czech Academy of Sciences Publication Activity Database

    Černý, Ivan; Buděšínský, Miloš; Pouzar, Vladimír; Drašar, P.

    2009-01-01

    Roč. 74, č. 1 (2009), s. 88-94 ISSN 0039-128X R&D Projects: GA MŠk(CZ) LC06077; GA AV ČR KAN200200651 Institutional research plan: CEZ:AV0Z40550506 Keywords : synthesis * oligomers * amides Subject RIV: CC - Organic Chemistry Impact factor: 2.905, year: 2009

  5. Synthesis, Anti-HCV, Antioxidant and Reduction of Intracellular Reactive Oxygen Species Generation of a Chlorogenic Acid Analogue with an Amide Bond Replacing the Ester Bond.

    Science.gov (United States)

    Wang, Ling-Na; Wang, Wei; Hattori, Masao; Daneshtalab, Mohsen; Ma, Chao-Mei

    2016-06-08

    Chlorogenic acid is a well known natural product with important bioactivities. It contains an ester bond formed between the COOH of caffeic acid and the 3-OH of quinic acid. We synthesized a chlorogenic acid analogue, 3α-caffeoylquinic acid amide, using caffeic and quinic acids as starting materials. The caffeoylquinc acid amide was found to be much more stable than chlorogenic acid and showed anti-Hepatitis C virus (anti-HCV) activity with a potency similar to chlorogenic acid. The caffeoylquinc acid amide potently protected HepG2 cells against oxidative stress induced by tert-butyl hydroperoxide.

  6. Synthesis, Anti-HCV, Antioxidant and Reduction of Intracellular Reactive Oxygen Species Generation of a Chlorogenic Acid Analogue with an Amide Bond Replacing the Ester Bond

    OpenAIRE

    Ling-Na Wang; Wei Wang; Masao Hattori; Mohsen Daneshtalab; Chao-Mei Ma

    2016-01-01

    Chlorogenic acid is a well known natural product with important bioactivities. It contains an ester bond formed between the COOH of caffeic acid and the 3-OH of quinic acid. We synthesized a chlorogenic acid analogue, 3α-caffeoylquinic acid amide, using caffeic and quinic acids as starting materials. The caffeoylquinc acid amide was found to be much more stable than chlorogenic acid and showed anti-Hepatitis C virus (anti-HCV) activity with a potency similar to chlorogenic acid. The caffeoylq...

  7. Synthesis and characterization of thermally stable poly(amide-imide ...

    African Journals Online (AJOL)

    ... polymeric chains on the properties of nanocomposites films were investigated by using UV-Vis spectroscopy, thermal gravimetry analysis (TGA) and water uptake measurements. KEYWORDS: Bis(4-carboxyphenyl)-N,N'-pyromellitimide acid moiety, Poly(amide-imide)-montmorillonite nanocomposite, Thermal properties.

  8. Acceleration of Amide Bond Rotation by Encapsulation in the Hydrophobic Interior of a Water-Soluble Supramolecular Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Pluth, Michael D.; Bergman, Robert G.; Raymond, Kenneth N.

    2008-04-08

    The hydrophobic interior cavity of a self-assembled supramolecular assembly exploits the hydrophobic effect for the encapsulation of tertiary amides. Variable temperature 1H NMR experiments reveal that the free energy barrier for rotation around the C-N amide bond is lowered by up to 3.6 kcal/mol upon encapsulation. The hydrophobic cavity of the assembly is able to stabilize the less polar transition state of the amide rotation process. Carbon-13 labeling studies showed that the {sup 13}C NMR carbonyl resonance increases with temperature for the encapsulated amides which suggests that the assembly is able to favor a twisted for of the amide.

  9. Mechanistic insight into benzenethiol catalyzed amide bond formations from thioesters and primary amines

    DEFF Research Database (Denmark)

    Stuhr-Hansen, Nicolai; Bork, Nicolai; Strømgaard, Kristian

    2014-01-01

    in the aromatic thioester amidation reaction. Under similar conditions, cysteine-free ligation was achieved by coupling a fully side-chain protected 15 amino acid phosphopeptide thioester to the free N-terminal of a side-chain protected 9 amino acid peptide producing the corresponding 24 amino acid phosphopeptide.......The influence of arylthiols on cysteine-free ligation, i.e. the reaction between an alkyl thioester and a primary amine forming an amide bond, was studied in a polar aprotic solvent. We reacted the ethylthioester of hippuric acid with cyclohexylamine in the absence or presence of various quantities...

  10. Ruthenium-catalyzed C7 amidation of indoline C-H bonds with sulfonyl azides.

    Science.gov (United States)

    Pan, Changduo; Abdukader, Ablimit; Han, Jie; Cheng, Yixiang; Zhu, Chengjian

    2014-03-24

    A ruthenium-catalyzed direct C7 amidation of indoline C-H bonds with sulfonyl azides was developed. This procedure allows the synthesis of a variety of 7-amino-substituted indolines, which are useful in pharmaceutical. The good functional tolerances, as well as the mild conditions, are prominent feature of this method. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Probing the role of backbone hydrogen bonds in protein-peptide interactions by amide-to-ester mutations

    DEFF Research Database (Denmark)

    Eildal, Jonas N N; Hultqvist, Greta; Balle, Thomas

    2013-01-01

    of the protein ligand, the role of the backbone hydrogen bonds in the binding reaction is not known. Using amide-to-ester substitutions to perturb the backbone hydrogen-bonding pattern, we have systematically probed putative backbone hydrogen bonds between four different PDZ domains and peptides corresponding...

  12. Characterization and dispersibility of improved thermally stable amide functionalized graphene oxide

    Energy Technology Data Exchange (ETDEWEB)

    Rani, Sumita [Electronic Science Department, Kurukshetra University, Kurukshetra, Haryana 136119 (India); Kumar, Mukesh, E-mail: kumarmukesh@gmail.com [Electronic Science Department, Kurukshetra University, Kurukshetra, Haryana 136119 (India); Kumar, Rajiv [Department of Chemistry, Kurukshetra University, Kurukshetra, Haryana 136119 (India); Kumar, Dinesh; Sharma, Sumit [Electronic Science Department, Kurukshetra University, Kurukshetra, Haryana 136119 (India); Singh, Gulshan [Department of Chemistry, Kurukshetra University, Kurukshetra, Haryana 136119 (India)

    2014-12-15

    Graphical abstract: Improved thermal stability and surface study of amide functionalized graphene oxide. - Highlights: • Amide functionalized graphene oxides (AGOs) were synthesized from aniline, 2-aminothiazole and 2-aminopyrimidine. • Achieved enhancement in thermal stability of AGOs as compare to GO. • AGOs are found to be highly dispersible in water, DMSO and DMF. • Dispersibility is stable for more than two and half months. - Abstract: Amidation of graphene oxide (GO) with aniline, 2-aminothiazole and 2-aminopyrimidine results in the synthesis of amide functionalized graphene oxides (AGOs). Scanning electron microscopy, X-ray diffraction, thermogravimetric analysis (TGA), UV–vis and Raman spectroscopy were used to investigate the properties of AGOs. It was found that, contrary to GO, AGOs are soluble in water, dimethyl sulfoxide, dimethylformamide and can be stabilized for months. TGA of AGOs shows the major weight loss above 670 °C as compared to GO in which significant weight loss occurs near 200 °C. Thus AGOs show strong improvement in thermal properties.

  13. Unusual intramolecular CHO hydrogen bonding interaction between a sterically bulky amide and uranyl oxygen.

    Science.gov (United States)

    Kannan, Shanmugaperumal; Kumar, Mukesh; Sadhu, Biswajit; Jaccob, Madhavan; Sundararajan, Mahesh

    2017-12-12

    The selective separation of toxic heavy metals such as uranyl can be accomplished using ligands with stereognostic hydrogen bonding interactions to the uranyl oxo group, as proposed by Raymond and co-workers (T. S. Franczyk, K. R. Czerwinski and K. N. Raymond, J. Am. Chem. Soc., 1992, 114, 8138-8146). Recently, several ligands possessing this weak interaction have been proposed involving the hydrogen bonding of NH and OH based moieties with uranyl oxygen. We herein report the structurally and spectroscopically characterized CHO hydrogen bonding using a sterically bulky amide based ligand. In conjunction with experiments, electronic structure calculations are carried out to understand the structure, binding and the strength of the CHO hydrogen bonding interactions. This weak interaction is mainly due to the steric effect caused by a bulky substituent around the donor group which has direct relevance in designing novel ligands in nuclear waste management processes. Although the kinetics are very slow, the ligand is also highly selective to uranyl in the presence of other interfering ions such as lanthanides.

  14. Probing acid-amide intermolecular hydrogen bonding by NMR spectroscopy and DFT calculations

    Science.gov (United States)

    Chaudhari, Sachin Rama; Suryaprakash, N.

    2012-05-01

    Benzene carboxylic acids and benzamide act as their self-complement in molecular recognition to form inter-molecular hydrogen bonded dimers between amide and carboxylic acid groups, which have been investigated by 1H, 13C and 15N NMR spectroscopy. Extensive NMR studies using diffusion ordered spectroscopy (DOSY), variable temperature 1D, 2D NMR, established the formation of heterodimers of benzamide with benzoic acid, salicylic acid and phenyl acetic acid in deuterated chloroform solution. Association constants for the complex formation in the solution state have been determined. The results are ascertained by X-ray diffraction in the solid state. Intermolecular interactions in solution and in solid state were found to be similar. The structural parameters obtained by X-ray diffraction studies are compared with those obtained by DFT calculations.

  15. Proton-driven amide bond-cleavage pathways of gas-phase peptide ions lacking mobile protons.

    Science.gov (United States)

    Bythell, Benjamin J; Suhai, Sándor; Somogyi, Arpád; Paizs, Béla

    2009-10-07

    The mobile proton model (Dongre, A. R., Jones, J. L., Somogyi, A. and Wysocki, V. H. J. Am. Chem. Soc. 1996, 118 , 8365-8374) of peptide fragmentation states that the ionizing protons play a critical role in the gas-phase fragmentation of protonated peptides upon collision-induced dissociation (CID). The model distinguishes two classes of peptide ions, those with or without easily mobilizable protons. For the former class mild excitation leads to proton transfer reactions which populate amide nitrogen protonation sites. This enables facile amide bond cleavage and thus the formation of b and y sequence ions. In contrast, the latter class of peptide ions contains strongly basic functionalities which sequester the ionizing protons, thereby often hindering formation of sequence ions. Here we describe the proton-driven amide bond cleavages necessary to produce b and y ions from peptide ions lacking easily mobilizable protons. We show that this important class of peptide ions fragments by different means from those with easily mobilizable protons. We present three new amide bond cleavage mechanisms which involve salt-bridge, anhydride, and imine enol intermediates, respectively. All three new mechanisms are less energetically demanding than the classical oxazolone b(n)-y(m) pathway. These mechanisms offer an explanation for the formation of b and y ions from peptide ions with sequestered ionizing protons which are routinely fragmented in large-scale proteomics experiments.

  16. Cis–Trans Amide Bond Rotamers in β-Peptoids and Peptoids: Evaluation of Stereoelectronic

    DEFF Research Database (Denmark)

    Laursen, Jonas Striegler; Engel-Andreasen, Jens; Fristrup, Peter

    2013-01-01

    to folding propensity. Thus, we here report an investigation of the effect of structural variations on the cis–trans amide bond rotamer equilibria in a selection of monomer model systems. In addition to various side chain effects, which correlated well with previous studies of α-peptoids, we present...... novel strategies for affecting the folding of peptoid constructs. By using NMR spectroscopy, X-ray crystallographic analysis, and density functional theory calculations, we present evidence for the presence of thioamide–aromatic interactions through Csp2-H…Samide hydrogen bonding, which stabilize...

  17. Unraveling the degradation of artificial amide bonds in nylon oligomer hydrolase: from induced-fit to acylation processes.

    Science.gov (United States)

    Baba, Takeshi; Boero, Mauro; Kamiya, Katsumasa; Ando, Hiroyuki; Negoro, Seiji; Nakano, Masayoshi; Shigeta, Yasuteru

    2015-02-14

    To elucidate how the nylon oligomer hydrolase (NylB) acquires its peculiar degradation activity towards non-biological amide bonds, we inspected the underlying enzymatic processes going from the induced-fit upon substrate binding to acylation. Specifically we investigated the mutational effects of two mutants, Y170F and D181G, indicated in former experiments as crucial systems because of their specific amino acid residues. Therefore, by adopting first-principles molecular dynamics complemented with metadynamics we provide a detailed insight into the underlying acylation mechanism. Our results show that while in the wild type (WT) the Tyr170 residue points the NH group towards the proton-acceptor site of an artificial amide bond, hence ready to react, in the Y170F this does not occur. The reason is ascribed to the absence of Tyr170 in the mutant, which is replaced by phenylalanine, which is unable to form hydrogen bond with the amide bond; thus, resulting in an increase in the activation barrier of more than 10 kcal mol(-1). Nonetheless, despite the lack of hydrogen bonding between the Y170F and the substrate, the highest free energy barrier for the induced-fit is similar to that of WT. This seems to suggest that in the induced-fit process, kinetics is little affected by the mutation. On the basis of additional structural homology analyses on the enzymes of the same family, we suggest that natural selection is responsible for the development of the peculiar hydrolytic activity of Arthrobacter sp. KI72.

  18. A protocol for amide bond formation with electron deficient amines and sterically hindered substrates

    DEFF Research Database (Denmark)

    Due-Hansen, Maria E; Pandey, Sunil K; Christiansen, Elisabeth

    2016-01-01

    A protocol for amide coupling by in situ formation of acyl fluorides and reaction with amines at elevated temperature has been developed and found to be efficient for coupling of sterically hindered substrates and electron deficient amines where standard methods failed.......A protocol for amide coupling by in situ formation of acyl fluorides and reaction with amines at elevated temperature has been developed and found to be efficient for coupling of sterically hindered substrates and electron deficient amines where standard methods failed....

  19. Ester-Mediated Amide Bond Formation Driven by Wet-Dry Cycles: A Possible Path to Polypeptides on the Prebiotic Earth.

    Science.gov (United States)

    Forsythe, Jay G; Yu, Sheng-Sheng; Mamajanov, Irena; Grover, Martha A; Krishnamurthy, Ramanarayanan; Fernández, Facundo M; Hud, Nicholas V

    2015-08-17

    Although it is generally accepted that amino acids were present on the prebiotic Earth, the mechanism by which α-amino acids were condensed into polypeptides before the emergence of enzymes remains unsolved. Here, we demonstrate a prebiotically plausible mechanism for peptide (amide) bond formation that is enabled by α-hydroxy acids, which were likely present along with amino acids on the early Earth. Together, α-hydroxy acids and α-amino acids form depsipeptides-oligomers with a combination of ester and amide linkages-in model prebiotic reactions that are driven by wet-cool/dry-hot cycles. Through a combination of ester-amide bond exchange and ester bond hydrolysis, depsipeptides are enriched with amino acids over time. These results support a long-standing hypothesis that peptides might have arisen from ester-based precursors. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. A catalytic antibody programmed for torsional activation of amide bond hydrolysis.

    Science.gov (United States)

    Aggarwal, Ranjana; Benedetti, Fabio; Berti, Federico; Buchini, Sabrina; Colombatti, Alfonso; Dinon, Francesca; Galasso, Vinicio; Norbedo, Stefano

    2003-07-07

    Amidase antibody 312d6, obtained against the sulfonamide hapten 4 a that mimics the transition state for hydrolysis of a distorted amide, accelerates the hydrolysis of the corresponding amides 1 a-3 a by a factor of 10(3) at pH 8. The mechanisms of both the uncatalyzed and antibody-catalyzed reactions were studied. Between pH 8 and 12 the uncatalyzed hydrolysis of N-toluoylindoles 1 a and 3 a shows a simple first-order dependence on [OH(-)], while hydrolysis of 3 a is zeroth-order in [OH(-)] below pH 8. The pH profile for hydrolysis of the corresponding tryptophan amide 2 a is more complex due to the dissociation of the zwitterion into an anion with pK(a) 9.74; hydrolysis of the zwitterionic and the anionic form of 2 a both show simple first-order dependence on [OH(-)]. Absence of (18)O exchange between H(2) (18)O/(18)OH(-) and the substrate, a normal SKIE for both 1 a (k(H)/k(D)=1.12) and 3 a (k(H)/k(D)=1.24) and the value of the Hammett constant rho for hydrolysis of p-substituted amides 3 a-e are consistent with an ester-like mechanism in which formation of the tetrahedral intermediate is rate-determining and the amine departs as anion. The 312d6-catalyzed hydrolysis of 3 a was studied between pH 7.5 and 9, and its independence of pH in this range indicates that water is the reacting nucleophile. Hydrolysis of 3 a is only partially inhibited by the sulfonamide hapten, and this indicates that non-specific catalysis by the protein accompanies the specific process. Only the nonspecific process is observed in the hydrolysis of amides 3 with para substituents other than methyl. Binding studies on the corresponding series of p-substituted sulfonamides 5 a-e confirm the high specificity of antibody 312d6 for p-methyl substituted substrates.

  1. C—C bond formation in the intramolecular Diels-Alder reaction of triene amides

    Directory of Open Access Journals (Sweden)

    Abdelilah Benallou

    2018-02-01

    Full Text Available The mechanism nature of the intramolecular Diels–Alder reaction has been performed; and thus, the changes of C—C bond forming/breaking along IRC are characterized in this study. Conceptual DFT analyses of the most favorable adduct fused/exo shows that the flux electronic will take place from diene to dienophile moiety. Moreover, ELF topological analysis based on the electron density predicts that C—C bond is formed by the coupling of two pseudoradical centers generated at the most significant atoms of the molecules. However, C2 vs C3, also C1 and C4 interaction comes mainly from the global electron density transfer which takes place along the reaction. Two- stage one-step is the proposed mechanism of this reaction, the first stage aims for the formation of C2—C3 σ bond while the second stage aims for C1—C4 σ bond formation. Interestingly, the observed asynchronicity of this IMDA reaction due principally to the asymmetric reorganization of electron density at the most attractive centers.

  2. Catalytic Ester and Amide to Amine Interconversion: Nickel-Catalyzed Decarbonylative Amination of Esters and Amides by C−O and C−C Bond Activation

    KAUST Repository

    Yue, Huifeng

    2017-03-15

    An efficient nickel-catalyzed decarbonylative amination reaction of aryl and heteroaryl esters has been achieved for the first time. The new amination protocol allows the direct interconversion of esters and amides into the corresponding amines and represents a good alternative to classical rearrangements as well as cross coupling reactions.

  3. Chemical bonding and electronic localization in a Ga(I) amide.

    Science.gov (United States)

    Thomsen, Maja K; Dange, Deepak; Jones, Cameron; Overgaard, Jacob

    2015-10-05

    The electron density in a one-coordinate [Ga(I) N(SiMe3 )R] complex has been determined from ab initio calculations and multipole modeling of 90 K X-ray data. The topologies of the Laplacian distribution and the ELI-D match a situation having an sp(3) -hybridized nitrogen with a tetrahedral arrangement of two single σ-bonds (to carbon and silicon) and two lone pairs pointing towards gallium in a scissor-grasping fashion. The analysis of the Laplacian distribution furthermore reveals a ligand-induced charge concentration (LICC) in the outer core of gallium oriented directly towards the nitrogen atom, and thus in between the two lone pairs. These observations might suggest that the trigonal planar nitrogen geometry result from a dative GaN bond, in which the roles of the metal and the ligand have been reversed with respect to a "standard" metal-ligand interaction, that is, the metal is here electron-donating. The ELI-D reveals a diffuse and directional lone pair on gallium, suggesting that this complex could serve as a σ-donor. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Nickel-Catalyzed C-S Bond Formation via Decarbonylative Thioetherification of Esters, Amides and Intramolecular Recombination Fragment Coupling of Thioesters

    KAUST Repository

    Lee, Shao-Chi

    2018-01-15

    A nickel catalyzed cross-coupling protocol for the straightforward C-S bond formation has been developed. Various mercaptans and a wide range of ester and amide substrates bearing various substituents were tolerated in this process which afforded products in good to excellent yields. Furthermore, an intramolecular protocol for the synthesis of thioethers starting from thioesters has been developed. The utility of this protocol has been demonstrated in the synthesis of benzothiophene on the bench top.

  5. Conformation-Specific IR and UV Spectroscopy of the Amino Acid Glutamine: Amide-Stacking and Hydrogen Bonding in AN Important Residue in Neurodegenerative Diseases

    Science.gov (United States)

    Walsh, Patrick S.; Dean, Jacob C.; Zwier, Timothy S.

    2014-06-01

    Glutamine plays an important role in several neurodegenerative diseases including Huntington's disease (HD) and Alzheimer's disease (AD). An intriguing aspect of the structure of glutamine is its incorporation of an amide group in its side chain, thereby opening up the possibility of forming amide-amide H-bonds between the peptide backbone and side chain. In this study the conformational preferences of two capped gluatamines Z(carboxybenzyl)-Glutamine-X (X=OH, NHMe) are studied under jet-cooled conditions in the gas phase in order to unlock the intrinsic structural motifs that are favored by this flexible sidechain. Conformational assignments are made by comparing the hydride stretch ( 3100-3700 cm-1) and amide I and II ( 1400-1800 cm-1) resonant ion-dip infrared spectra with predictions from harmonic frequency calculations. Assigned structures will be compared to previously published results on both natural and unnatural residues. Particular emphasis will be placed on the comparison between glutamine and unconstrained γ-peptides due to the similar three-carbon spacing between backbone and side chain in glutamine to the backbone spacing in γ-peptides. The ability of the glutamine side-chain to form amide stacked conformations will be a main focus, along with the prevalence of extended backbone type structures. W. H. James, III, C W. Müller, E. G. Buchanan, M. G. D. Nix, L. Guo, L. Roskop, M. S. Gordon, L. V. Slipchenko, S. H. Gellman, and T. S. Zwier, J. Am. Chem. Soc., 2009, 131(40), 14243-14245.

  6. Quantum chemical studies of a model for peptide bond formation. 3. Role of magnesium cation in formation of amide and water from ammonia and glycine

    Science.gov (United States)

    Oie, T.; Loew, G. H.; Burt, S. K.; MacElroy, R. D.

    1984-01-01

    The SN2 reaction between glycine and ammonia molecules with magnesium cation Mg2+ as a catalyst has been studied as a model reaction for Mg(2+)-catalyzed peptide bond formation using the ab initio Hartree-Fock molecular orbital method. As in previous studies of the uncatalyzed and amine-catalyzed reactions between glycine and ammonia, two reaction mechanisms have been examined, i.e., a two-step and a concerted reaction. The stationary points of each reaction including intermediate and transition states have been identified and free energies calculated for all geometry-optimized reaction species to determine the thermodynamics and kinetics of each reaction. Substantial decreases in free energies of activation were found for both reaction mechanisms in the Mg(2+)-catalyzed amide bond formation compared with those in the uncatalyzed and amine-catalyzed amide bond formation. The catalytic effect of the Mg2+ cation is to stabilize both the transition states and intermediate, and it is attributed to the neutralization of the developing negative charge on the electrophile and formation of a conformationally flexible nonplanar five-membered chelate ring structure.

  7. Nickel-catalysed retro-hydroamidocarbonylation of aliphatic amides to olefins

    Science.gov (United States)

    Hu, Jiefeng; Wang, Minyan; Pu, Xinghui; Shi, Zhuangzhi

    2017-05-01

    Amide and olefins are important synthetic intermediates with complementary reactivity which play a key role in the construction of natural products, pharmaceuticals and manmade materials. Converting the normally highly stable aliphatic amides into olefins directly is a challenging task. Here we show that a Ni/NHC-catalytic system has been established for decarbonylative elimination of aliphatic amides to generate various olefins via C-N and C-C bond cleavage. This study not only overcomes the acyl C-N bond activation in aliphatic amides, but also encompasses distinct chemical advances on a new type of elimination reaction called retro-hydroamidocarbonylation. This transformation shows good functional group compatibility and can serve as a powerful synthetic tool for late-stage olefination of amide groups in complex compounds.

  8. From Coordination Cages to a Stable Crystalline Porous Hydrogen-Bonded Framework

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Zhanfeng [State Key Lab of Structure Chemistry, Fujian Institute of Research on the Structure of Matter, CAS, Fuzhou 350002 P. R. China; Liu, Guoliang [State Key Lab of Structure Chemistry, Fujian Institute of Research on the Structure of Matter, CAS, Fuzhou 350002 P. R. China; Chen, Yu-Sheng [ChemMatCARS, Center for Advanced Radiation Sources, The University of Chicago, Argonne Illinois 60439 USA; Yuan, Daqiang [State Key Lab of Structure Chemistry, Fujian Institute of Research on the Structure of Matter, CAS, Fuzhou 350002 P. R. China; Chen, Banglin [Department of Chemistry, University of Texas at San Antonio, San Antonio Texas 78249-0698 USA

    2017-03-20

    A stable framework has been constructed through multiple charge-assisted H-bonds between cationic coordination cages and chloride ions. The framework maintained its original structure upon desolvation, which has been established by single-crystal structure analysis. This is the first fully characterized stable porous framework based on coordination cages after desolvation, with a moderately high Brunauer–Emmett–Teller (BET) surface area of 1201 m2 g-1. This work will not only give a light to construct stable porous frameworks based on coordination cages and thus broaden their applications, but will also provide a new avenue to the assembly of other porous materials such as porous organic cages and hydrogen-bonded organic frameworks (HOFs) through non covalent bonds.

  9. Effect of Substituents on the Bond Strength of Air-Stable Dicyanomethyl Radical Thermochromes.

    Science.gov (United States)

    Peterson, Joshua P; Geraskina, Margarita R; Zhang, Rui; Winter, Arthur H

    2017-06-16

    A series of substituted aryl dicyanomethyl radicals were synthesized, and the bonding thermodynamic parameters for self-dimerization were determined from van't Hoff plots obtained from variable-temperature electron paramagnetic resonance and ultraviolet-visible spectroscopy. At low temperatures, the radicals dimerize, but the colored, air-stable free radicals return upon heating. Heating and cooling cycles (5-95 °C) can be repeated without radical degradation and with striking thermochromic behavior. We find a linear free energy relationship between the Hammett para substituent parameter and the dimerization equilibrium constant, with para electron-donating substituents leading to a weaker bond and electron-withdrawing substituents leading to stronger bonds, following a captodative effect. Density functional theory investigations [B98D/6-31+G(d,p)] reveal that the dimers prefer a slip-stacked geometry and feature elongated bonds.

  10. Synthesis of amide-functionalized cellulose esters by olefin cross-metathesis.

    Science.gov (United States)

    Meng, Xiangtao; Edgar, Kevin J

    2015-11-05

    Cellulose esters with amide functionalities were synthesized by cross-metathesis (CM) reaction of terminally olefinic esters with different acrylamides, catalyzed by Hoveyda-Grubbs 2nd generation catalyst. Chelation by amides of the catalyst ruthenium center caused low conversions using conventional solvents. The effects of both solvent and structure of acrylamide on reaction conversion were investigated. While the inherent tendency of acrylamides to chelate Ru is governed by the acrylamide N-substituents, employing acetic acid as a solvent significantly improved the conversion of certain acrylamides, from 50% to up to 99%. Homogeneous hydrogenation using p-toluenesulfonyl hydrazide successfully eliminated the α,β-unsaturation of the CM products to give stable amide-functionalized cellulose esters. The amide-functionalized product showed higher Tg than its starting terminally olefinic counterpart, which may have resulted from strong hydrogen bonding interactions of the amide functional groups. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Prebiotic Peptide (Amide) Bond Synthesis Accelerated by Glycerol and Bicarbonate Under Neutral to Alkaline Dry-Down Conditions

    Science.gov (United States)

    Forsythe, J. G.; Weber, A. L.

    2017-07-01

    We report a new process for robust peptide bond synthesis in the pH 6–10 range that involves dry-down heating of amino acids in the presence of glycerol and bicarbonate (substrates: L-alanine, L-2-aminobutyric acid, β-alanine, isoserine).

  12. Iodine salts of the pharmaceutical compound agomelatine: the effect of the symmetric H-bond on amide protonation

    Czech Academy of Sciences Publication Activity Database

    Skořepová, E.; Hušák, M.; Ridvan, L.; Tkadlecová, M.; Havlíček, J.; Dušek, Michal

    2016-01-01

    Roč. 18, č. 24 (2016), s. 4518-4529 ISSN 1466-8033 R&D Projects: GA ČR GA15-12653S; GA MŠk LO1603 EU Projects: European Commission(XE) CZ.2.16/3.1.00/24510 Institutional support: RVO:68378271 Keywords : agomelatine * crystal structure * API * iodides * symmetric hydrogen bond Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.474, year: 2016

  13. Conformation analysis and computation of energy barrier to rotation about Csbnd N bond in para-methylphenyl carbamate and its solvent dependence in comparison with tertiary carbamates and tertiary amides

    Science.gov (United States)

    Modarresi-Alam, Ali Reza; Nowroozi, Alireza; Najafi, Parisa; Movahedifar, Fahimeh; Hajiabadi, Hossein

    2014-11-01

    Barrier to rotation about conjugated Csbnd N bond in p-Methyl phenyl carbamate (PMPC) was computed 14-16 kcal/mol at three levels of HF, B3LYP and MP2 using 6-311++G∗∗ basis set. The solvent effect and energy barriers about Csbnd N bond in PMPC were compared to the case of tertiary carbamates and tertiary amides. Moreover, it is shown that in primary carbamates such as PMPC and tertiary amides isomerisation process passes through TS2 and TS1 respectively, while in tertiary carbamates goes through a combination of both TSs. Furthermore, X-ray analysis which is reported for the first time for primary aryl carbamates demonstrated that the inclusive plane of carbamate functional group is perpendicular to the plane of phenyl ring. The results of computations are completely in agreement with the X-ray data.

  14. Software-aided approach to investigate peptide structure and metabolic susceptibility of amide bonds in peptide drugs based on high resolution mass spectrometry.

    Directory of Open Access Journals (Sweden)

    Tatiana Radchenko

    Full Text Available Interest in using peptide molecules as therapeutic agents due to high selectivity and efficacy is increasing within the pharmaceutical industry. However, most peptide-derived drugs cannot be administered orally because of low bioavailability and instability in the gastrointestinal tract due to protease activity. Therefore, structural modifications peptides are required to improve their stability. For this purpose, several in-silico software tools have been developed such as PeptideCutter or PoPS, which aim to predict peptide cleavage sites for different proteases. Moreover, several databases exist where this information is collected and stored from public sources such as MEROPS and ExPASy ENZYME databases. These tools can help design a peptide drug with increased stability against proteolysis, though they are limited to natural amino acids or cannot process cyclic peptides, for example. We worked to develop a new methodology to analyze peptide structure and amide bond metabolic stability based on the peptide structure (linear/cyclic, natural/unnatural amino acids. This approach used liquid chromatography / high resolution, mass spectrometry to obtain the analytical data from in vitro incubations. We collected experimental data for a set (linear/cyclic, natural/unnatural amino acids of fourteen peptide drugs and four substrate peptides incubated with different proteolytic media: trypsin, chymotrypsin, pepsin, pancreatic elastase, dipeptidyl peptidase-4 and neprilysin. Mass spectrometry data was analyzed to find metabolites and determine their structures, then all the results were stored in a chemically aware manner, which allows us to compute the peptide bond susceptibility by using a frequency analysis of the metabolic-liable bonds. In total 132 metabolites were found from the various in vitro conditions tested resulting in 77 distinct cleavage sites. The most frequent observed cleavage sites agreed with those reported in the literature. The

  15. Software-aided approach to investigate peptide structure and metabolic susceptibility of amide bonds in peptide drugs based on high resolution mass spectrometry

    Science.gov (United States)

    Fontaine, Fabien; Morettoni, Luca; Zamora, Ismael

    2017-01-01

    Interest in using peptide molecules as therapeutic agents due to high selectivity and efficacy is increasing within the pharmaceutical industry. However, most peptide-derived drugs cannot be administered orally because of low bioavailability and instability in the gastrointestinal tract due to protease activity. Therefore, structural modifications peptides are required to improve their stability. For this purpose, several in-silico software tools have been developed such as PeptideCutter or PoPS, which aim to predict peptide cleavage sites for different proteases. Moreover, several databases exist where this information is collected and stored from public sources such as MEROPS and ExPASy ENZYME databases. These tools can help design a peptide drug with increased stability against proteolysis, though they are limited to natural amino acids or cannot process cyclic peptides, for example. We worked to develop a new methodology to analyze peptide structure and amide bond metabolic stability based on the peptide structure (linear/cyclic, natural/unnatural amino acids). This approach used liquid chromatography / high resolution, mass spectrometry to obtain the analytical data from in vitro incubations. We collected experimental data for a set (linear/cyclic, natural/unnatural amino acids) of fourteen peptide drugs and four substrate peptides incubated with different proteolytic media: trypsin, chymotrypsin, pepsin, pancreatic elastase, dipeptidyl peptidase-4 and neprilysin. Mass spectrometry data was analyzed to find metabolites and determine their structures, then all the results were stored in a chemically aware manner, which allows us to compute the peptide bond susceptibility by using a frequency analysis of the metabolic-liable bonds. In total 132 metabolites were found from the various in vitro conditions tested resulting in 77 distinct cleavage sites. The most frequent observed cleavage sites agreed with those reported in the literature. The main advantages of

  16. Polymer amide as an early topology.

    Science.gov (United States)

    McGeoch, Julie E M; McGeoch, Malcolm W

    2014-01-01

    Hydrophobic polymer amide (HPA) could have been one of the first normal density materials to accrete in space. We present ab initio calculations of the energetics of amino acid polymerization via gas phase collisions. The initial hydrogen-bonded di-peptide is sufficiently stable to proceed in many cases via a transition state into a di-peptide with an associated bound water molecule of condensation. The energetics of polymerization are only favorable when the water remains bound. Further polymerization leads to a hydrophobic surface that is phase-separated from, but hydrogen bonded to, a small bulk water complex. The kinetics of the collision and subsequent polymerization are discussed for the low-density conditions of a molecular cloud. This polymer in the gas phase has the properties to make a topology, viz. hydrophobicity allowing phase separation from bulk water, capability to withstand large temperature ranges, versatility of form and charge separation. Its flexible tetrahedral carbon atoms that alternate with more rigid amide groups allow it to deform and reform in hazardous conditions and its density of hydrogen bonds provides adhesion that would support accretion to it of silicon and metal elements to form a stellar dust material.

  17. Polymer amide as an early topology.

    Directory of Open Access Journals (Sweden)

    Julie E M McGeoch

    Full Text Available Hydrophobic polymer amide (HPA could have been one of the first normal density materials to accrete in space. We present ab initio calculations of the energetics of amino acid polymerization via gas phase collisions. The initial hydrogen-bonded di-peptide is sufficiently stable to proceed in many cases via a transition state into a di-peptide with an associated bound water molecule of condensation. The energetics of polymerization are only favorable when the water remains bound. Further polymerization leads to a hydrophobic surface that is phase-separated from, but hydrogen bonded to, a small bulk water complex. The kinetics of the collision and subsequent polymerization are discussed for the low-density conditions of a molecular cloud. This polymer in the gas phase has the properties to make a topology, viz. hydrophobicity allowing phase separation from bulk water, capability to withstand large temperature ranges, versatility of form and charge separation. Its flexible tetrahedral carbon atoms that alternate with more rigid amide groups allow it to deform and reform in hazardous conditions and its density of hydrogen bonds provides adhesion that would support accretion to it of silicon and metal elements to form a stellar dust material.

  18. Stable Failure-Inducing Micro-Silica Aqua Epoxy Bonding Material for Floating Concrete Module Connection

    Directory of Open Access Journals (Sweden)

    Jang-Ho Jay Kim

    2015-11-01

    Full Text Available Many recent studies in the development of floating concrete structures focused on a connection system made of modules. In the connection system, the modules are designed to be attached by pre-stressing (PS while floating on the water, which exposes them to loads on the surface of the water. Therefore, the development of a pre-connection material becomes critical to ensure successful bonding of floating concrete modules. Micro-silica mixed aqua-epoxy (MSAE was developed for this task. To find the proper MSAE mix proportion, 0% to 4% micro-silica was mixed in a standard mixture of aqua-epoxy for material testing. Also, the effect of micro-silica on the viscosity of the aqua epoxy was evaluated by controlling the epoxy silane at proportions of 0%, ±5%, and ±10%. After completion of the performance tests of the MSAE, we evaluated the effect of MSAE in a connected structure. The plain unreinforced concrete module joint specimens applied with MSAE at thicknesses of 5, 10, and 20 mm were prepared to be tested. Finally, we evaluated the performance of MSAE-applied reinforced concrete (RC module specimens connected by PS tendons, and these were compared with those of continuous RC and non-MSAE-applied beams. The results showed that the mix of micro-silica in the aqua-epoxy changed the performance of the aqua-epoxy and the mix ratio of 2% micro-silica gave a stable failure behavior. The flexural capacity of concrete blocks bonded with MSAE changed according to the bond thickness and was better than that of concrete blocks bonded with aqua-epoxy without micro-silica. Even though MSAE insignificantly increases the load-carrying capacity of the attached concrete module structure, the stress concentration reduction effect stabilized the failure of the structure.

  19. Stable gold(III) catalysts by oxidative addition of a carbon-carbon bond.

    Science.gov (United States)

    Wu, Chung-Yeh; Horibe, Takahiro; Jacobsen, Christian Borch; Toste, F Dean

    2015-01-22

    Low-valent late transition-metal catalysis has become indispensable to chemical synthesis, but homogeneous high-valent transition-metal catalysis is underdeveloped, mainly owing to the reactivity of high-valent transition-metal complexes and the challenges associated with synthesizing them. Here we report a carbon-carbon bond cleavage at ambient conditions by a Au(i) complex that generates a stable Au(iii) cationic complex. In contrast to the well-established soft and carbophilic Au(i) catalyst, this Au(iii) complex exhibits hard, oxophilic Lewis acidity. For example, we observed catalytic activation of α,β-unsaturated aldehydes towards selective conjugate additions as well as activation of an unsaturated aldehyde-allene for a [2 + 2] cycloaddition reaction. The origin of the regioselectivity and catalytic activity was elucidated by X-ray crystallographic analysis of an isolated Au(iii)-activated cinnamaldehyde intermediate. The concepts revealed suggest a strategy for accessing high-valent transition-metal catalysis from readily available precursors.

  20. Fabrication of extremely thermal-stable GaN template on Mo substrate using double bonding and step annealing process

    Science.gov (United States)

    Qing, Wang; Yang, Liu; Yongjian, Sun; Yuzhen, Tong; Guoyi, Zhang

    2016-08-01

    A new layer transfer technique which comprised double bonding and a step annealing process was utilized to transfer the GaN epilayer from a sapphire substrate to a Mo substrate. Combined with the application of the thermal-stable bonding medium, the resulting two-inch-diameter GaN template showed extremely good stability under high temperature and low stress state. Moreover, no cracks and winkles were observed. The transferred GaN template was suitable for homogeneous epitaxial, thus could be used for the direct fabrication of vertical LED chips as well as power electron devices. It has been confirmed that the double bonding and step annealing technique together with the thermal-stable bonding layer could significantly improve the bonding strength and stress relief, finally enhancing the thermal stability of the transferred GaN template. Project supported by the Guangdong Innovative Research Team Program (No. 2009010044), the China Postdoctoral Science Foundation (No. 2014M562233), the National Natural Science Foundation of Guangdong, China (No. 2015A030312011), and the Opened Fund of the State Key Laboratory on Integrated Optoelectronics (No. IOSKL2014KF17).

  1. Selective Reductive Removal of Ester and Amide Groups from Arenes and Heteroarenes through Nickel-Catalyzed C−O and C−N Bond Activation

    KAUST Repository

    Yue, Huifeng

    2017-03-21

    An inexpensive nickel(II) catalyst and a hydrosilane were used for the efficient reductive defunctionalization of aryl and heteroaryl esters through a decarbonylative pathway. This versatile method could be used for the removal of ester and amide functional groups from various organic molecules. Moreover, a scale-up experiment and a synthetic application based on the use of a removable carboxylic acid directing group highlight the usefulness of this reaction.

  2. Neutral iodotriazoles as scaffolds for stable halogen-bonded assemblies in solution.

    Science.gov (United States)

    Maugeri, Leonardo; Asencio-Hernández, Julia; Lébl, Tomáš; Cordes, David B; Slawin, Alexandra M Z; Delsuc, Marc-André; Philp, Douglas

    2016-10-01

    The halogen bond (XB) donor properties of neutral 1,4-diaryl-5-iodo-1,2,3-triazoles are explored using a combination of computational and experimental results and are shown to be competitive in halogen bonding efficiency with the classic pentafluoroiodobenzene XB donor. The S N Ar reactivity of these donors permits the facile assembly of an iodotriazole functionalised with a 3-oxypyridine XB acceptor, thus generating a molecular scaffold capable of undergoing dimerisation through the formation of two halogen bonds. The formation of this halogen-bonded dimer is demonstrated by 1 H and DOSY NMR experiments and a plausible structure generated using DFT calculations.

  3. Synthesis and characterization of thermally stable poly(amide-imide-montmorillonite nanocomposites based on bis(4-carboxyphenyl-N,N'-pyromellitimide acid

    Directory of Open Access Journals (Sweden)

    M. Hajibeygi

    2013-04-01

    Full Text Available Two new poly(amide-imide-montmorillonite reinforced nanocomposites containing bis(4-carboxyphenyl-N,N'-pyromellitimide acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide-imide (PAI as a source of polymer matrix was synthesized by the direct polycondensation reaction of bis(4-carboxyphenyl-N,N'-pyromellitimide acid with 4,4'-diamino diphenyl sulfone in the presence of triphenyl phosphite (TPP, CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP. Morphology and structure of the resulting PAI-nanocomposite films with 10 and 20% silicate particles were characterized by FT-IR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposites films were investigated by using UV-Vis spectroscopy, thermal gravimetry analysis (TGA and water uptake measurements.DOI: http://dx.doi.org/10.4314/bcse.v27i1.10

  4. High-energy, stable and recycled molecular solar thermal storage materials using AZO/graphene hybrids by optimizing hydrogen bonds.

    Science.gov (United States)

    Luo, Wen; Feng, Yiyu; Qin, Chengqun; Li, Man; Li, Shipei; Cao, Chen; Long, Peng; Liu, Enzuo; Hu, Wenping; Yoshino, Katsumi; Feng, Wei

    2015-10-21

    An important method for establishing a high-energy, stable and recycled molecular solar heat system is by designing and preparing novel photo-isomerizable molecules with a high enthalpy and a long thermal life by controlling molecular interactions. A meta- and ortho-bis-substituted azobenzene chromophore (AZO) is covalently grafted onto reduced graphene oxide (RGO) for solar thermal storage materials. High grafting degree and close-packed molecules enable intermolecular hydrogen bonds (H-bonds) for both trans-(E) and cis-(Z) isomers of AZO on the surface of nanosheets, resulting in a dramatic increase in enthalpy and lifetime. The metastable Z-form of AZO on RGO is thermally stabilized with a half-life of 52 days by steric hindrance and intermolecular H-bonds calculated using density functional theory (DFT). The AZO-RGO fuel shows a high storage capacity of 138 Wh kg(-1) by optimizing intermolecular H-bonds with a good cycling stability for 50 cycles induced by visible light at 520 nm. Our work opens up a new method for making advanced molecular solar thermal storage materials by tuning molecular interactions on a nano-template.

  5. Stable Au-C bonds to the substrate for fullerene-based nanostructures

    Czech Academy of Sciences Publication Activity Database

    Chutora, Taras; López, Roso Redondo Jesús R.; De La Torre Cerdeño, Bruno; Švec, Martin; Jelínek, Pavel; Vázquez, Héctor

    2017-01-01

    Roč. 8, č. 1 (2017), s. 1073-1079 ISSN 2190-4286 R&D Projects: GA ČR GA15-19672S Institutional support: RVO:68378271 Keywords : Au-C bonds * density functional theory (DFT) * fullerenes * scanning tunneling microscopy (STM) * sputtering Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 3.127, year: 2016

  6. Synthesis, morphology, and properties of segmented poly(ether amide)s with uniform oxalamide-based hard segments

    NARCIS (Netherlands)

    Sijbrandi, N.J.; Kimenai, A.J.; Mes, E.P.C.; Broos, R.; Bar, G.; Rosenthal, M.; Odarchenko, Y.; Ivanov, D.A.; Dijkstra, Pieter J.; Feijen, Jan

    2012-01-01

    The synthesis, morphology, and properties of segmented poly(ether amide)s based on flexible PTHF segments (Mn = 1.1 × 103 g mol–1) and uniform rigid oxalamide segments were investigated. The amount of oxalamide groups in the hard segment and the spacer length of bisoxalamide-based hydrogen bonded

  7. Amide to Alkyne Interconversion via a Nickel/Copper-Catalyzed Deamidative Cross-Coupling of Aryl and Alkenyl Amides

    KAUST Repository

    Srimontree, Watchara

    2017-06-05

    A nickel-catalyzed deamidative cross-coupling reaction of amides with terminal alkynes as coupling partners was disclosed. This newly developed methodology allows the direct interconversion of amides to alkynes and enables a facile route for C(sp2)-C(sp) bond formation in a straightforward and mild fashion.

  8. Oxidative activation of dihydropyridine amides to reactive acyl donors

    DEFF Research Database (Denmark)

    Funder, Erik Daa; Trads, Julie Brender; Gothelf, Kurt Vesterager

    2015-01-01

    Amides of 1,4-dihydropyridine (DHP) are activated by oxidation for acyl transfer to amines, alcohols and thiols. In the reduced form the DHP amide is stable towards reaction with amines at room temperature. However, upon oxidation with DDQ the acyl donor is activated via a proposed pyridinium...

  9. Spectroscopic and structural studies of a new para-iodo-N-benzyl amide of salinomycin

    Science.gov (United States)

    Antoszczak, Michał; Janczak, Jan; Rutkowski, Jacek; Brzezinski, Bogumił; Huczyński, Adam

    2017-11-01

    A new para-iodo-N-benzyl amide of salinomycin was synthesized and characterized by NMR, FT-IR, DFT, single crystal X-ray diffraction and theoretical methods. The results obtained for the crystal, in solution and in gas phase provided evidence of pseudo-cyclic structure of this compound stabilized by intramolecular hydrogen bonds. It was shown that the compound studied forms stable 1:1 complexes with monovalent (Li+, Na+, K+, Rb+ and Cs+) and divalent (Mg2+, Ca2+, Sr2+ and Ba2+) cations demonstrating that the chemical modification of salinomycin carboxyl group considerably changes the ionophoretic properties of this antibiotic. For the first time, the ESI MS fragmentations of the complex of para-iodo-N-benzyl amide of salinomycin with Na+ are also discussed in details.

  10. Ground-State Distortion in N-Acyl-tert-butyl-carbamates (Boc) and N-Acyl-tosylamides (Ts): Twisted Amides of Relevance to Amide N-C Cross-Coupling.

    Science.gov (United States)

    Szostak, Roman; Shi, Shicheng; Meng, Guangrong; Lalancette, Roger; Szostak, Michal

    2016-09-02

    Amide N-C(O) bonds are generally unreactive in cross-coupling reactions employing low-valent transition metals due to nN → π*C═O resonance. Herein we demonstrate that N-acyl-tert-butyl-carbamates (Boc) and N-acyl-tosylamides (Ts), two classes of acyclic amides that have recently enabled the development of elusive amide bond N-C cross-coupling reactions with organometallic reagents, are intrinsically twisted around the N-C(O) axis. The data have important implications for the design of new amide cross-coupling reactions with the N-C(O) amide bond cleavage as a key step.

  11. Characterization of FdmV as an Amide Synthetase for Fredericamycin A Biosynthesis in Streptomyces griseus ATCC 43944*

    OpenAIRE

    Chen, Yihua; Wendt-Pienkowski, Evelyn; Ju, Jianhua; Lin, Shuangjun; Rajski, Scott R.; Shen, Ben

    2010-01-01

    Fredericamycin (FDM) A is a pentadecaketide natural product that features an amide linkage. Analysis of the fdm cluster from Streptomyces griseus ATCC 43944, however, failed to reveal genes encoding the types of amide synthetases commonly seen in natural product biosynthesis. Here, we report in vivo and in vitro characterizations of FdmV, an asparagine synthetase (AS) B-like protein, as an amide synthetase that catalyzes the amide bond formation in FDM A biosynthesis. This is supported by the...

  12. Backbone amide linker strategy

    DEFF Research Database (Denmark)

    Shelton, Anne Pernille Tofteng; Jensen, Knud Jørgen

    2013-01-01

    In the backbone amide linker (BAL) strategy, the peptide is anchored not at the C-terminus but through a backbone amide, which leaves the C-terminal available for various modifications. This is thus a very general strategy for the introduction of C-terminal modifications. The BAL strategy...... to assemble the final peptide. One useful application of this strategy is in the synthesis of C-terminal peptide aldehydes. The C-terminal aldehyde is masked as an acetal during synthesis and then conveniently demasked in the final cleavage step to generate the free aldehyde. Another application...

  13. Comparing Amide-Forming Reactions Using Green Chemistry Metrics in an Undergraduate Organic Laboratory

    Science.gov (United States)

    Fennie, Michael W.; Roth, Jessica M.

    2016-01-01

    In this laboratory experiment, upper-division undergraduate chemistry and biochemistry majors investigate amide-bond-forming reactions from a green chemistry perspective. Using hydrocinnamic acid and benzylamine as reactants, students perform three types of amide-forming reactions: an acid chloride derivative route; a coupling reagent promoted…

  14. The road to the first, fully active and more stable human insulin variant with an additional disulfide bond

    DEFF Research Database (Denmark)

    Vinther, Tine N.; Kjeldsen, Thomas B.; Jensen, Knud Jørgen

    2015-01-01

    Insulin, a small peptide hormone, is crucial in maintaining blood glucose homeostasis. The stability and activity of the protein is directed by an intricate system involving disulfide bonds to stabilize the active monomeric species and by their non-covalent oligomerization. All known insulin vari...

  15. Tf2NH-Catalyzed Amide Synthesis from Vinyl Azides and Alcohols.

    Science.gov (United States)

    Zhang, Feng-Lian; Zhu, Xu; Chiba, Shunsuke

    2015-06-19

    Triflimide (Tf2NH) specifically catalyzed reactions of alcohols and vinyl azides, enabling efficient construction of amides with C-C bond formation through nucleophilic attack of vinyl azides onto the putative carbocation intermediates derived from alcohols are described.

  16. Amides in Nature and Biocatalysis.

    Science.gov (United States)

    Pitzer, Julia; Steiner, Kerstin

    2016-10-10

    Amides are widespread in biologically active compounds with a broad range of applications in biotechnology, agriculture and medicine. Therefore, as alternative to chemical synthesis the biocatalytic amide synthesis is a very interesting field of research. As usual, Nature can serve as guide in the quest for novel biocatalysts. Several mechanisms for carboxylate activation involving mainly acyl-adenylate, acyl-phosphate or acyl-enzyme intermediates have been discovered, but also completely different pathways to amides are found. In addition to ribosomes, selected enzymes of almost all main enzyme classes are able to synthesize amides. In this review we give an overview about amide synthesis in Nature, as well as biotechnological applications of these enzymes. Moreover, several examples of biocatalytic amide synthesis are given. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Spectroscopic and molecular modeling investigation on the binding of a synthesized steroidal amide to protein

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hua-xin, E-mail: h.x.zhang@yeah.net; Liu, E.

    2014-09-15

    Owing to the various valuable biological activities, steroidal amides have become a hot topic in steroidal pharmaceutical chemistry. In this paper, an anti-tumor steroid derivate (DAAO) was synthesized and identified. The interaction between DAAO and human serum albumin (HSA) was studied by fluorescence spectra, circular dichroism (CD) spectra, molecular modeling and molecular probe techniques. The results suggested that DAAO had reacted with HSA through hydrogen bonds and van der Waals power. The formation of DAAO–HSA complex at ground state led to static quenching of HSA's fluorescence. The number of binding sites, binding constants, enthalpy change (ΔH{sup θ}), Gibbs free energy change (ΔG{sup θ}) and entropy change (ΔS{sup θ}) were calculated at different temperatures based on fluorescence quenching theory and classic equation. Molecular modeling investigation indicated that DAAO was more inclined to absorb on Sudlow's site I in subdomain IIA of HSA molecule on grounds of the lowest energy principle and steric hindrance effect. The binding location was further confirmed by fluorescence probe experiment using warfarin (site I probe) for displacement. Furthermore, the conformational changes of HSA in presence of DAAO were investigated by CD spectra. The results could provide new evidence explaining the relationship between the chemical structure and biological activity and may be useful for understanding the anti-cancer mechanism of steroidal drug. - Highlights: • A designed steroidal amide compound (DAAO) was synthesized by introducing amido bonds into a steroid nucleus. • DAAO binds to Sudlow's site I in HSA through hydrogen bonds and van der Waals power. • The interaction was a spontaneous and exothermic process with modest degree of reversibility. • The secondary structure of HSA and the microenvironment of TRP214 altered. • Amido bond in steroid nucleus (–NH–CO–) plays important role in stabling the structure of

  18. α-Halo Amides as Competent Latent Enolates: Direct Catalytic Asymmetric Mannich-Type Reaction.

    Science.gov (United States)

    Sun, Bo; Balaji, Pandur Venkatesan; Kumagai, Naoya; Shibasaki, Masakatsu

    2017-06-21

    α-Halogenated carbonyl compounds are susceptible to dehalogenation and thus largely neglected as enolate precursors in catalytic enantioselective C-C bond-forming reactions. By merging the increased stability of the α-C-halogen bond of amides and the direct enolization methodology of the designed amide, we explored a direct catalytic asymmetric Mannich-type reaction of α-halo 7-azaindoline amides with N-carbamoyl imines. All α-halo substituents, α-F, -Cl, -Br, -I amides, were tolerated to provide the Mannich-adducts in a highly stereoselective manner without undesirable dehalogenation. The diastereoselectivity switched intriguingly depending on the substitution pattern of the aromatic imines, which is ascribed to stereochemical differentiation based on the open transition-state model. Functional group interconversion of the 7-azaindoline amide moiety of the Mannich-adducts and further elaboration into a diamide without dehalogenation highlight the synthetic utility of the present protocol for accessing enantioenriched halogenated chemical entities.

  19. Amides in Nature and Biocatalysis

    NARCIS (Netherlands)

    Pitzer, J.; Steiner, K.

    2016-01-01

    Amides are widespread in biologically active compounds with a broad range of applications in biotechnology, agriculture and medicine. Therefore, as alternative to chemical synthesis the biocatalytic amide synthesis is a very interesting field of research. As usual, Nature can serve as guide in the

  20. NMR solution structure study of one saturated sulphur-containing amides from Glycosmis lucida.

    Science.gov (United States)

    Geng, Zhu-Feng; Yang, Kai; Li, Yin-Ping; Guo, Shan-Shan; You, Chun-Xue; Zhang, Wen-Juan; Zhang, Zhe; Du, Shu-Shan

    2017-04-01

    One sulphur-containing amide (N-[2-(4-Hydroxyphenyl)-ethyl]-3-methanesulfonyl-N-methyl-propionamide) which was isolated from Glycosmis lucida Wall ex Huang had a different NMR profile with this kind of compounds' normal case. Based on the information obtained by nuclear magnetic resonance pectroscopy (NMR) and mass spectrometry (MS), its configurations in solution were investigated. The results indicated that the compound would have two stable configurations in solution as the double bond switched between C-N and C-O in an appropriate rate. This phenomenon was clearly exposed by the one dimension selective NOE (1D-NOE) experiments. This conclusion would play an active role in the structure analysis work of this kind of compounds.

  1. Ultra-stable Molecule-Surface Architectures at Metal Oxides: Structure, Bonding, and Electron-transfer Processes

    Energy Technology Data Exchange (ETDEWEB)

    Hamers, Robert John

    2013-12-07

    Research funded by this project focused on the development of improved strategies for functionalization of metal oxides to enhance charge-transfer processes relevant to solar energy conversion. Initial studies included Fe2O3, WO3, TiO2, SnO2, and ZnO as model oxide systems; these systems were chosen due to differences in metal oxidation state and chemical bonding types in these oxides. Later studies focused largely on SnO2 and ZnO, as these materials show particularly promising surface chemistry, have high electron mobility, and can be readily grown in both spherical nanoparticles and as elongated nanorods. New molecules were synthesized that allowed the direct chemical assembly of novel nanoparticle ?dyadic? structures in which two different oxide materials are chemically joined, leading to an interface that enhances the separation of of charge upon illumination. We demonstrated that such junctions enhance photocatalytic efficiency using model organic compounds. A separate effort focused on novel approaches to linking dye molecules to SnO2 and ZnO as a way to enhance solar conversion efficiency. A novel type of surface binding through

  2. Hydrogen spillover in Pt-single-walled carbon nanotube composites: formation of stable C-H bonds.

    Science.gov (United States)

    Bhowmick, Ranadeep; Rajasekaran, Srivats; Friebel, Daniel; Beasley, Cara; Jiao, Liying; Ogasawara, Hirohito; Dai, Hongjie; Clemens, Bruce; Nilsson, Anders

    2011-04-13

    Using in situ electrical conductivity and ex situ X-ray photoelectron spectroscopy (XPS) measurements, we have examined how the hydrogen uptake of single-walled carbon nanotubes (SWNTs) is influenced by the addition of Pt nanoparticles. The conductivity of platinum-sputtered single-walled carbon nanotubes (Pt-SWNTs) during molecular hydrogen exposure decreased more rapidly than that of the corresponding pure SWNTs, which supports a hydrogenation mechanism facilitated by "spillover" of dissociated hydrogen from the Pt nanoparticles. C 1s XPS spectra indicate that the Pt-SWNTs store hydrogen by means of chemisorption, that is, covalent C-H bond formation: molecular hydrogen charging at elevated pressure (8.27 bar) and room temperature yielded Pt-SWNTs with up to 16 ± 1.5 at. % sp(3)-hybridized carbon atoms, which corresponds to a hydrogen-storage capacity of 1.2 wt % (excluding the weight of Pt nanoparticles). Pt-SWNTs prepared by the Langmuir-Blodgett (LB) technique exhibited the highest Pt/SWNT ratio and also the best hydrogen uptake. © 2011 American Chemical Society

  3. Three-dimensional hydrogen-bonded structures in the hydrated proton-transfer salts of isonipecotamide with the dicarboxylic oxalic and adipic acid homologues.

    Science.gov (United States)

    Smith, Graham; Wermuth, Urs D

    2013-10-01

    The structures of the 1:1 hydrated proton-transfer compounds of isonipecotamide (piperidine-4-carboxamide) with oxalic acid, 4-carbamoylpiperidinium hydrogen oxalate dihydrate, C6H13N2O(+)·C2HO4(-)·2H2O, (I), and with adipic acid, bis(4-carbamoylpiperidinium) adipate dihydrate, 2C6H13N2O(+)·C6H8O4(2-)·2H2O, (II), are three-dimensional hydrogen-bonded constructs involving several different types of enlarged water-bridged cyclic associations. In the structure of (I), the oxalate monoanions give head-to-tail carboxylic acid O-H···O(carboxyl) hydrogen-bonding interactions, forming C(5) chain substructures which extend along a. The isonipecotamide cations also give parallel chain substructures through amide N-H···O hydrogen bonds, the chains being linked across b and down c by alternating water bridges involving both carboxyl and amide O-atom acceptors and amide and piperidinium N-H···O(carboxyl) hydrogen bonds, generating cyclic R4(3)(10) and R3(2)(11) motifs. In the structure of (II), the asymmetric unit comprises a piperidinium cation, half an adipate dianion, which lies across a crystallographic inversion centre, and a solvent water molecule. In the crystal structure, the two inversion-related cations are interlinked through the two water molecules, which act as acceptors in dual amide N-H···O(water) hydrogen bonds, to give a cyclic R4(2)(8) association which is conjoined with an R4(4)(12) motif. Further N-H···O(water), water O-H···O(amide) and piperidinium N-H···O(carboxyl) hydrogen bonds give the overall three-dimensional structure. The structures reported here further demonstrate the utility of the isonipecotamide cation as a synthon for the generation of stable hydrogen-bonded structures. The presence of solvent water molecules in these structures is largely responsible for the non-occurrence of the common hydrogen-bonded amide-amide dimer, promoting instead various expanded cyclic hydrogen-bonding motifs.

  4. Synthesis of an Acyltrifluoroborate and its Fusion with Azides to Form Amides

    Science.gov (United States)

    Raushel, Jessica; Ellis, Noel M.

    2010-01-01

    A uniquely stable acyl potassium trifluoroborate, potassium (2-phenylacetyl) trifluoroborate, has been synthesized and isolated. In the presence of an activating Lewis acid, this reagent reacts with azides to form amides in good yields. PMID:20481486

  5. Ru(II)-catalyzed amidation reactions of 8-methylquinolines with azides via C(sp(3))-H activation.

    Science.gov (United States)

    Liu, Bingxian; Li, Bin; Wang, Baiquan

    2015-11-25

    Ru(II)-catalyzed amidation reactions of 8-methylquinolines with azides have been developed. They are the first examples of [(p-cymene)RuCl2]2-catalyzed C(sp(3))-H bond intermolecular amidation reactions which give quinolin-8-ylmethanamines under mild reaction conditions in good yields.

  6. Copper-catalyzed C(sp2)-H amidation with azides as amino sources.

    Science.gov (United States)

    Peng, Jiangling; Xie, Zeqiang; Chen, Ming; Wang, Jian; Zhu, Qiang

    2014-09-19

    A copper-catalyzed C-H amidation process, with azides as amino sources under oxidant-free conditions, has been developed. When N-heterocycles were employed as directing groups, sulfonylazide and benzoylazide could be used as amidating reagents to provide corresponding N-arylamides. When amidines or imine were used, tandem C-N/N-N bond formation occurred to afford indazole derivatives in one pot.

  7. Gold nanoparticles as markers for fluorinated surfaces containing embedded amide groups

    Science.gov (United States)

    Ballarin, Barbara; Barreca, Davide; Bertola, Maurizio; Cristina Cassani, Maria; Carraro, Giorgio; Maccato, Chiara; Mignani, Adriana; Nanni, Daniele; Parise, Chiara; Ranieri, Silvia

    2018-05-01

    Indium tin oxide (ITO) substrates were functionalized with fluoroalkylsilanes (FAS) having formula RFC(O)N(R)(CH2)3Si(OMe)3 (1, R = H, RF = C5F11; 2, R = CH3, RF = C5F11;3, R = H, RF = C3F7) and containing embedded amide moieties between the perfluoroalkyl chain and the syloxanic moiety. Subsequently, Au nanoparticle deposition (AuNP) onto the ITO-FAS functionalized surfaces was carried out by immersion into a solution of citrate-stabilized AuNP. The ITO-FAS and AuNP/ITO-FAS modified systems were characterized by various complementary techniques and compared with AuNP/ITO modified with RF(CH2)2Si(OEt)3 (4, RF = C6F13), free from functional groups between the fluorinated tail and the syloxanic moiety. The results showed that only ITO glasses modified with 1, 2 and 3 displayed an oleophobic, as well as hydrophobic, behaviour and that the AuNP Surface Coverage (SC %) directly depended on the fluoroalkylsilane nature with the following trend: 60% ITO-2 > 16% ITO-3 > 9% ITO-1 > 3% ITO-4. The obtained results revealed that, in organosilane 2, the presence of a methyl group on the amide nitrogen increases the steric hindrance in the rotation around the Nsbnd CO bond, resulting in the co-presence of two stable conformers in comparable amounts. Their co-presence in solution, combined with the lack of intermolecular Nsbnd H⋯OCsbnd N hydrogen bonds among the anchored molecules, has dramatic influences on the functionalized ITO, yielding a disorderedly packed coating able to accommodate a large quantity of AuNP. These results indicate that AuNP can act as excellent probes to evaluate the coating layer quality but, at the same time, it is possible to tune the gold loading on electroactive surfaces depending on the chemical structure of the used fluorinated silane.

  8. Cis/Trans Isomerization in Secondary Amides: Reaction Paths, Nitrogen Inversion, and Relevance to Peptidic Systems.

    Science.gov (United States)

    Thakkar, Balmukund S; Svendsen, John-Sigurd M; Engh, Richard A

    2017-09-14

    Cis/trans isomerization of 2°-amide bonds is a key step in a wide range of important processes. Here we present a theoretical assessment of cis/trans isomerization of 2°-amide bonds using B3LYP density functional methods, describing two reaction paths and corresponding geometry changes during isomerization of N-methylacetamide (NMA) and glycylglycine methyl ester (GGMe). The isomerization begins via a common path, as the extended π-bonding of the amide bond maintains approximate planarity of the O-C-N-H dihedral angle, with only gradually increasing pyramidalization of the nitrogen atom, until a bifurcation point is reached. Both subsequent paths comprise two phases, an "ω phase" (characterized by a major change in C-C-N-C dihedral) and a "θ phase" (characterized by major change in O-C-N-H dihedral), with two distinct transition states. The θ phase involves inversion of the pyramidal amide-nitrogen geometry. Both reaction paths converge at another bifurcation point near the opposite geometry. Studies on the larger GGMe show in addition that the multiple additional rotamers do not change the qualitative properties of the isomerization, but do affect the energies of the differing transition states. These detailed results provide significant new insights into cis/trans isomerization paths in 2°-amides, and serve as a basis for theoretical studies on larger peptidic systems.

  9. Water-Stable Metal-Organic Framework with Three Hydrogen-Bond Acceptors: Versatile Theoretical and Experimental Insights into Adsorption Ability and Thermo-Hydrolytic Stability.

    Science.gov (United States)

    Roztocki, Kornel; Lupa, Magdalena; Sławek, Andrzej; Makowski, Wacław; Senkovska, Irena; Kaskel, Stefan; Matoga, Dariusz

    2018-03-02

    A new microporous cadmium metal-organic framework was synthesized both mechanochemically and in solution by using a sulfonyl-functionalized dicarboxylate linker and an acylhydrazone colinker. The three-dimensional framework is highly stable upon heating to 300 °C as well as in aqueous solutions at elevated temperatures or acidic conditions. The thermally activated material exhibits steep water vapor uptake at low relative pressures at 298 K and excellent recyclability up to 260 °C as confirmed by both quasi-equilibrated temperature-programmed desorption and adsorption (QE-TPDA) method as well as adsorption isotherm measurements. Reversible isotherms and hysteretic isobars recorded for the desorption-adsorption cycles indicate the maximum uptake of 0.19 g/g (at 298 K, up to p/p 0 = 1) or 0.18 g/g (at 1 bar, within 295-375 K range), respectively. The experimental isosteric heat of adsorption (48.9 kJ/mol) indicates noncoordinative interactions of water molecules with the framework. Exchange of the solvent molecules in the as-made material with water, performed in the single-crystal to single-crystal manner, allows direct comparison of both X-ray crystal structures. The single-crystal X-ray diffraction for the water-loaded framework demonstrates the orientation of water clusters in the framework cavities and reveals their strong hydrogen bonding with sulfonyl, acyl, and carboxylate groups of the two linkers. The grand canonical Monte Carlo (GCMC) simulations of H 2 O adsorption corroborate the experimental findings and reveal preferable locations of guest molecules in the framework voids at various pressures. Additionally, both experimental and GCMC simulation insights into the adsorption of CO 2 (at 195 K) on the activated framework are presented.

  10. Synthesis, physiochemical characterization, and in vitro antitumor activity of the amide and pH cleavable hydrazone conjugates of γ-tocotrienol isomer of vitamin E with methoxy-poly(ethylene) glycol.

    Science.gov (United States)

    Abu-Fayyad, Ahmed; Nazzal, Sami

    2017-08-30

    The anticancer activity of water soluble methoxy polyethylene glycol (mPEG) derivatives of tocotrienol (T3) isomers of vitamin E was previously found to be reduced when compared to the parent free isomers. This could be due to the ester bond formation between the mPEG and the 6-OH group on the chroman moiety of the T3 isomer. To further investigate, the objectives of the current study were to (1) synthesize and characterize stable amide and cleavable hydrazone conjugates between mPEG and carbon-5 on the chroman moiety of T3, and (2) examine the cytotoxicity of the newly synthesized mPEG conjugates against breast (MCF-7 and MDA-MB-231) and pancreatic (BxPC-3 and PANC-1) cancer cells. Conjugates were synthesized by direct conjugation of succinyl chloride derivatives of mPEG to the α-tocopherol and γ-tocotrienol isomers of vitamin E, and were characterized by 1 H NMR, FT-IR, and mass spectrometry. The micelles of the amide and hydrazone self-assembled conjugates were characterized for size, zeta, CMC, and stability at different pH media. The hydrolysis of the hydrazone conjugate was pH dependent with highest release at acidic (pH 5.5) conditions, whereas the amide conjugate was stable in all tested media. The amide conjugate nonetheless showed greater cytotoxicity than the hydrazone conjugate, which suggested that maintaining solubility and the presence of free 6-OH group are important for γ-T3 to exert anticancer activity in vitro. The results from the current study demonstrated the importance of considering the nature of the chemical bond between T3 and mPEG when designing functional ingredients for use in drug delivery. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Mesoporous Niobium Oxide Spheres as an Effective Catalyst for the Transamidation of Primary Amides with Amines

    KAUST Repository

    Ghosh, Subhash Chandra

    2014-02-06

    Mesoporous niobium oxide spheres (MNOS), conveniently prepared by a novel antisolvent precipitation approach, have been shown to be an effective catalyst for the transamidation of primary amides with amines. This novel transamidation can be efficiently carried out under solvent-free conditions and is applicable to a wide range of primary amides and amines to provide N-alkyl amides in good to excellent yields. The catalyst is highly stable and reusable. The application of this transamidation reaction has been demonstrated in the synthesis of antidepressant drug moclobemide and other druglike compounds. © 2014 Wiley-VCH Verlag GmbH&Co. KGaA, Weinheim.

  12. Computational Amide I Spectroscopy for Refinement of Disordered Peptide Ensembles: Maximum Entropy and Related Approaches

    Science.gov (United States)

    Reppert, Michael; Tokmakoff, Andrei

    The structural characterization of intrinsically disordered peptides (IDPs) presents a challenging biophysical problem. Extreme heterogeneity and rapid conformational interconversion make traditional methods difficult to interpret. Due to its ultrafast (ps) shutter speed, Amide I vibrational spectroscopy has received considerable interest as a novel technique to probe IDP structure and dynamics. Historically, Amide I spectroscopy has been limited to delivering global secondary structural information. More recently, however, the method has been adapted to study structure at the local level through incorporation of isotope labels into the protein backbone at specific amide bonds. Thanks to the acute sensitivity of Amide I frequencies to local electrostatic interactions-particularly hydrogen bonds-spectroscopic data on isotope labeled residues directly reports on local peptide conformation. Quantitative information can be extracted using electrostatic frequency maps which translate molecular dynamics trajectories into Amide I spectra for comparison with experiment. Here we present our recent efforts in the development of a rigorous approach to incorporating Amide I spectroscopic restraints into refined molecular dynamics structural ensembles using maximum entropy and related approaches. By combining force field predictions with experimental spectroscopic data, we construct refined structural ensembles for a family of short, strongly disordered, elastin-like peptides in aqueous solution.

  13. Effect of the Amide Bond Diamine Structure on the CO 2 , H 2 S, and CH 4 Transport Properties of a Series of Novel 6FDA-Based Polyamide–Imides for Natural Gas Purification

    KAUST Repository

    Vaughn, J.

    2012-09-11

    A series of higher permeability polyamide-imides based on 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride with comparable plasticization resistance to Torlon were synthesized and formed into dense film membranes. Polymers possessing 2,4-diamino mesitylene (DAM) were stable up to 56 atm of pure CO 2, which is due to enhanced charge transfer complex formation compared to polymers containing 4,4′- (hexafluoroisopropylidene) dianiline (6FpDA) and 2,3,5,6-tetramethyl-1,4- phenylenediamine (TmPDA). The new polymers containing DAM and TmPDA showed ideal CO 2/CH 4 selectivities of near 50 with CO 2 and H 2S permeabilities over an order of magnitude higher than Torlon. CO 2 and CH 4 sorption in the DAM- and TmPDA-based materials was reduced, whereas H 2S sorption was enhanced relative to membranes containing fluorinated 6FpDA. Consequently, DAM- and TmPDA-based membranes showed increased stability toward high pressure CO 2 but lower plasticization resistance toward pure H 2S. These results highlight the differences between CO 2 and H 2S that challenge the rational design of materials targeting simultaneous separation of both contaminants. © 2012 American Chemical Society.

  14. Dynamics of urokinase receptor interaction with Peptide antagonists studied by amide hydrogen exchange and mass spectrometry

    DEFF Research Database (Denmark)

    Jørgensen, Thomas J D; Gårdsvoll, Henrik; Danø, Keld

    2004-01-01

    Using amide hydrogen exchange combined with electrospray ionization mass spectrometry, we have in this study determined the number of amide hydrogens on several peptides that become solvent-inaccessible as a result of their high-affinity interaction with the urokinase-type plasminogen activator...... receptor (uPAR). These experiments reveal that at least six out of eight amide hydrogens in a synthetic nine-mer peptide antagonist (AE105) become sequestered upon engagement in uPAR binding. Various uPAR mutants with decreased affinity for this peptide antagonist gave similar results, thereby indicating...... that deletion of the favorable interactions involving the side chains of these residues in uPAR does not affect the number of hydrogen bonds established by the main chain of the peptide ligand. The isolated growth factor-like domain (GFD) of the cognate serine protease ligand for uPAR showed 11 protected amide...

  15. Amide group anchored glucose oxidase based anodic catalysts for high performance enzymatic biofuel cell

    Science.gov (United States)

    Chung, Yongjin; Ahn, Yeonjoo; Kim, Do-Heyoung; Kwon, Yongchai

    2017-01-01

    A new enzyme catalyst is formed by fabricating gold nano particle (GNP)-glucose oxidase (GOx) clusters that are then attached to polyethyleneimine (PEI) and carbon nanotube (CNT) with cross-linkable terephthalaldehyde (TPA) (TPA/[CNT/PEI/GOx-GNP]). Especially, amide bonds belonging to TPA play an anchor role for incorporating rigid bonding among GNP, GOx and CNT/PEI, while middle size GNP is well bonded with thiol group of GOx to form strong GNP-GOx cluster. Those bonds are identified by chemical and electrochemical characterizations like XPS and cyclic voltammogram. The anchording effect of amide bonds induces fast electron transfer and strong chemical bonding, resulting in enhancements in (i) catalytic activity, (ii) amount of immobilized GOx and (ii) performance of enzymatic biofuel cell (EBC) including the catalyst. Regarding the catalytic activity, the TPA/[CNT/PEI/GOx-GNP] produces high electron transfer rate constant (6 s-1), high glucose sensitivity (68 μA mM-1 cm-2), high maximum current density (113 μA cm-2), low charge transfer resistance (17.0 Ω cm2) and long-lasting durability while its chemical structure is characterized by XPS confirming large portion of amide bond. In EBC measurement, it has high maximum power density (0.94 mW cm-2) compatible with catalytic acitivity measurements.

  16. Ru(II)-catalyzed intermolecular ortho-C-H amidation of aromatic ketones with sulfonyl azides.

    Science.gov (United States)

    Bhanuchandra, M; Yadav, M Ramu; Rit, Raja K; Rao Kuram, Malleswara; Sahoo, Akhila K

    2013-06-07

    Ru(II)-catalyzed intermolecular ortho-C-H amidation of weakly coordinating aromatic ketones with sulfonyl azides is reported. The developed reaction protocol can be extended to various substituted aromatic ketones to afford a wide range of desired C-N bond formation products in good yields.

  17. Rhodium(III)-catalyzed intermolecular amidation with azides via C(sp³)-H functionalization.

    Science.gov (United States)

    Wang, Nuancheng; Li, Renhe; Li, Liubo; Xu, Shansheng; Song, Haibin; Wang, Baiquan

    2014-06-06

    The amidation reactions of 8-methylquinolines with azides catalyzed by a cationic rhodium(III) complex proceed efficiently to give quinolin-8-ylmethanamine derivatives in good yields via C(sp(3))-H bond activation under external oxidant-free conditions. A catalytically competent five-membered rhodacycle has been isolated and characterized, revealing a key intermediate in the catalytic cycle.

  18. Nonplanar Tertiary Amides in Rigid Chiral Tricyclic Dilactams. Peptide Group Distortions and Vibrational Optical Activity

    Czech Academy of Sciences Publication Activity Database

    Pazderková, Markéta; Profant, V.; Hodačová, J.; Šebestík, Jaroslav; Pazderka, T.; Novotná, P.; Urbanová, M.; Šafařík, Martin; Buděšínský, Miloš; Tichý, Miloš; Bednárová, Lucie; Baumruk, V.; Maloň, Petr

    2013-01-01

    Roč. 117, č. 33 (2013), s. 9626-9642 ISSN 1520-6106 R&D Projects: GA ČR GAP205/10/1276 Institutional support: RVO:61388963 Keywords : spirodilactams * amide bond * vibrational circular dichroism * non-planarity * Raman optical activity Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.377, year: 2013

  19. Protein structure validation and refinement using amide proton chemical shifts derived from quantum mechanics

    DEFF Research Database (Denmark)

    Christensen, Anders Steen; Linnet, Troels Emtekær; Borg, Mikael

    2013-01-01

    We present the ProCS method for the rapid and accurate prediction of protein backbone amide proton chemical shifts - sensitive probes of the geometry of key hydrogen bonds that determine protein structure. ProCS is parameterized against quantum mechanical (QM) calculations and reproduces high level...

  20. synthesis and characterization of thermally stable poly(amide-imide)

    African Journals Online (AJOL)

    Preferred Customer

    -imide)- montmorillonite nanocomposite, Thermal properties. INTRODUCTION. Polymer-clay nanocomposites typically exhibited mechanical, thermal and gas barrier properties, which are superior to those of the corresponding pure polymers ...

  1. Antifungal activity of natural and synthetic amides from Piper species

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Joaquim V.; Oliveira, Alberto de; Kato, Massuo J., E-mail: majokato@iq.usp.b [Universidade de Sao Paulo (IQ/USP), SP (Brazil). Inst. de Quimica; Raggi, Ludmila; Young, Maria C. [Instituto de Botanica, Sao Paulo, SP (Brazil). Secao de Fisiologia e Bioquimica de Plantas

    2010-07-01

    The antifungal leaves extract from Piper scutifolium was submitted to bioactivity-guided chromatographic separation against Cladosporium cladosporioides and C. sphaerospermum yielding piperine, piperlonguminine and corcovadine as the active principles which displayed a detection limit of 1 {mu}g. Structure-activity relationships were investigated with the preparation of twelve analogs having differences in the number of unsaturations, aromatic ring substituents and in the amide moiety. Analogs having a single double-bond and no substituent in the aromatic ring displayed higher activity, while N,N,-diethyl analogs displayed higher dose-dependent activity. (author)

  2. Synthetic polyspermine imidazole-4, 5-amide as an efficient and cytotoxicity-free gene delivery system

    Directory of Open Access Journals (Sweden)

    Duan S

    2012-07-01

    Full Text Available Shi-Yue Duan, Xue-Mei Ge, Nan Lu, Fei Wu, Weien Yuan, Tuo JinSchool of Pharmacy, Shanghai Jiao Tong University, Shanghai, 200240, People's Republic of ChinaAbstract: A chemically dynamic spermine-based polymer: polyspermine imidazole-4, 5-amide (PSIA, Mw > 7 kDa was designed, synthesized, and evaluated in terms of its ability to deliver nucleic acids. This polymer was made from an endogenous monomer professionally condensing genes in sperms, spermine, and a known safety drug metabolite, imidazole-4, 5-dicarboxylic acid, through a bis-amide bond conjugated with the imidazole ring. This polymer can condense pDNA at a W/W ratio above 10 to form polyplexes (100–200 nm in diameter, which is consistent with the observation by transmission electron microscopy (TEM, and the zeta potential was in the range of 10–20 mV. The pDNA packaged polymer was stable in phosphate buffer solution (PBS at pH 7.4 (simulated body fluid while the polyplexes were releasing pDNA into the solution at pH 5.8 (simulated endo-lysosomes due to the degradation of the bis-amide linkages in response to changes in pH values. PSIA-polyplexes were able to achieve efficient cellular uptake and luciferase gene silencing by co-transfection of pDNA and siRNA in COS-7 cells and HepG2 cells with negligible cytotoxicity. Biodistribution of Rhodamine B-labeled PSIA-polyplexes after being systemically injected in BALB/c nude-mice showed that the polyplexes circulated throughout the body, accumulated mainly in the kidney at 4 hours of sample administration, and moved to the liver and spleen after 24 hours. All the results suggested that PSIA offered a promising example to balance the transfection efficiency and toxicity of a synthetic carrier system for the delivery of therapeutic nucleic acids.Keywords: gene delivery, polyspermine, cytotoxicity, transfection efficiency, biodistribution

  3. Novel endogenous N-acyl amides activate TRPV1-4 receptors, BV-2 microglia, and are regulated in brain in an acute model of inflammation

    Directory of Open Access Journals (Sweden)

    Siham eRaboune

    2014-08-01

    Full Text Available A family of endogenous lipids, structurally analogous to the endogenous cannabinoid, N-arachidonoyl ethanolamine (Anandamide, and called N-acyl amides have emerged as a family of biologically active compounds at TRP receptors. N-acyl amides are constructed from an acyl group and an amine via an amide bond. This same structure can be modified by changing either the fatty acid or the amide to form potentially hundreds of lipids. More than 70 N-acyl amides have been identified in nature. We have ongoing studies aimed at isolating and characterizing additional members of the family of N-acyl amides in both central and peripheral tissues in mammalian systems. Here, using a unique in-house library of over 70 N-acyl amides we tested the following three hypotheses: 1 Additional N-acyl amides will have activity at TRPV1-4, 2 Acute peripheral injury will drive changes in CNS levels of N-acyl amides, and 3 N-acyl amides will regulate calcium in CNS-derived microglia. Through these studies, we have identified 20 novel N-acyl amides that collectively activate (stimulating or inhibiting TRPV1-4. Using lipid extraction and HPLC coupled to tandem mass spectrometry we showed that levels of at least 10 of these N-acyl amides that activate TRPVs are regulated in brain after intraplantar carrageenan injection. We then screened the BV2 microglial cell line for activity with this N-acyl amide library and found overlap with TRPV receptor activity as well as additional activators of calcium mobilization from these lipids. Together these data provide new insight into the family of N-acyl amides and their roles as signaling molecules at ion channels, in microglia, and in the brain in the context of inflammation.

  4. On the determinants of amide backbone exchange in proteins: a neutron crystallographic comparative study.

    Science.gov (United States)

    Bennett, Brad C; Gardberg, Anna S; Blair, Matthew D; Dealwis, Chris G

    2008-07-01

    The hydrogen/deuterium-exchange (HDX) method, coupled with neutron diffraction, is a powerful probe for investigating molecular dynamics. In the present report, general determinants of HDX are proposed based on 12 deposited neutron protein structures. The parameters that correlate best with HDX are the depth within the protein structure of the amide N atom and the secondary-structure type. Both the B factor of the amide N atom and the ratio B/B correlate moderately. However, solvent accessibility only correlates strongly for one molecule and hydrogen-bonding distance correlates for two molecules with respect to amide HDX. In addition to the relatively small number of neutron structures available, the limitations to this type of analysis, namely resolution, data completeness and the data-to-parameter ratio, are discussed briefly. A global analysis of HDX was performed to overcome some of these obstacles, damping the effects of outliers and the extreme variation of the data sets arising from resolution limitations. From this, amide depth and hydrogen-bonding distance to the amide (a measure of interaction strength) show strong global correlation with HDX. For some structures, the constituents of the hydrophobic protein core could be identified based on contiguous regions that are resistant to exchange and have significant depth. These may, in fact, constitute minimal folding domains.

  5. A review on solid phase extraction of actinides and lanthanides with amide based extractants.

    Science.gov (United States)

    Ansari, Seraj A; Mohapatra, Prasanta K

    2017-05-26

    Solid phase extraction is gaining attention from separation scientists due to its high chromatographic utility. Though both grafted and impregnated forms of solid phase extraction resins are popular, the later is easy to make by impregnating a given organic extractant on to an inert solid support. Solid phase extraction on an impregnated support, also known as extraction chromatography, combines the advantages of liquid-liquid extraction and the ion exchange chromatography methods. On the flip side, the impregnated extraction chromatographic resins are less stable against leaching out of the organic extractant from the pores of the support material. Grafted resins, on the other hand, have a higher stability, which allows their prolong use. The goal of this article is a brief literature review on reported actinide and lanthanide separation methods based on solid phase extractants of both the types, i.e., (i) ligand impregnation on the solid support or (ii) ligand functionalized polymers (chemically bonded resins). Though the literature survey reveals an enormous volume of studies on the extraction chromatographic separation of actinides and lanthanides using several extractants, the focus of the present article is limited to the work carried out with amide based ligands, viz. monoamides, diamides and diglycolamides. The emphasis will be on reported applied experimental results rather than on data pertaining fundamental metal complexation. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Smart synthesis of high performance thermosets based on ortho-(amide-co-imide functional benzoxazines

    Directory of Open Access Journals (Sweden)

    Hatsuo eIshida

    2015-02-01

    Full Text Available High performance thermosets via amide-imide functional benzoxazine resins as precursors have been synthesized. The structures of synthesized monomers have been confirmed by 1H NMR and FT-IR. Among these two benzoxazine monomers, the ortho-amide-imide functional benzoxazine resin shows powerful features both in the synthesis of benzoxazine monomers and the properties of the corresponding thermosets. For the cross-linked poly(amide-co-imide based on ortho-amide-imide functional benzoxazine, a smart route is adopted to develop a more thermally stable cross-linked poly(benzoxazole-co-imide. Besides, the poly(benzoxazole-co-imide can also undergo a further thermal treatment to form polybenzoxazole. Furthermore, a main-chain type ortho-functional polybenzoxazine with amide-co-imide and benzoxazine groups as repeating units has also been prepared. Both the ortho-amide-imide functional benzoxazine and main-chain type polybenzoxazine resins show the possibility to form high performance thermosets with low cost and easy processability .

  7. Hydrogen abstraction reactions by amide electron adducts

    International Nuclear Information System (INIS)

    Sevilla, M.D.; Sevilla, C.L.; Swarts, S.

    1982-01-01

    Electron reactions with a number of peptide model compounds (amides and N-acetylamino acids) in aqueous glasses at low temperature have been investigated using ESR spectroscopy. The radicals produced by electron attachment to amides, RC(OD)NDR', are found to act as hydrogen abstracting agents. For example, the propionamide electron adduct is found to abstract from its parent propionamide. Electron adducts of other amides investigated show similar behavior except for acetamide electron adduct which does not abstract from its parent compound, but does abstract from other amides. The tendency toward abstraction for amide electron adducts are compared to electron adducts of several carboxylic acids, ketones, aldehydes and esters. The comparison suggests the hydrogen abstraction tendency of the various deuterated electron adducts (DEAs) to be in the following order: aldehyde DEA > acid DEA = approximately ester DEA > ketone DEA > amide DEA. In basic glasses the hydrogen abstraction ability of the amide electron adducts is maintained until the concentration of base is increased sufficiently to convert the DEA to its anionic form, RC(O - )ND 2 . In this form the hydrogen abstracting ability of the radical is greatly diminished. Similar results were found for the ester and carboxylic acid DEA's tested. (author)

  8. Metal extraction by amides of carboxylic acids

    International Nuclear Information System (INIS)

    Skorovarov, D.I.; Chumakova, G.M.; Rusin, L.I.; Ul'anov, V.S.; Sviridova, R.A.; Sviridov, A.L.

    1988-01-01

    Extraction ability of various amides was studied. Data on extraction of rare earths, vanadium, molybdenum, rhenium, uranium, niobium, tantalum by N,N-dibutyl-amides of acetic, nonanic acids and fatly synthetic acids of C 7 -C 9 fractions are presented. Effect of salting-out agents, inorganic acid concentrations on extraction process was studied. Potential ability of using amides of carboxylic acids for extractional concentration of rare earths as well as for recovery and separation of iron, rhenium, vanadium, molybdenum, uranium, niobium, and tantalum was shown

  9. Dissecting Hofmeister Effects: Direct Anion-Amide Interactions Are Weaker than Cation-Amide Binding.

    Science.gov (United States)

    Balos, Vasileios; Kim, Heejae; Bonn, Mischa; Hunger, Johannes

    2016-07-04

    Whereas there is increasing evidence for ion-induced protein destabilization through direct ion-protein interactions, the strength of the binding of anions to proteins relative to cation-protein binding has remained elusive. In this work, the rotational mobility of a model amide in aqueous solution was used as a reporter for the interactions of different anions with the amide group. Protein-stabilizing salts such as KCl and KNO3 do not affect the rotational mobility of the amide. Conversely, protein denaturants such as KSCN and KI markedly reduce the orientational freedom of the amide group. Thus these results provide evidence for a direct denaturation mechanism through ion-protein interactions. Comparing the present findings with results for cations shows that in contrast to common belief, anion-amide binding is weaker than cation-amide binding. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Synthesis of 2-aryl-2H-benzotrizoles from azobenzenes and N-sulfonyl azides through sequential rhodium-catalyzed amidation and oxidation in one pot.

    Science.gov (United States)

    Ryu, Taekyu; Min, Jiae; Choi, Wonseok; Jeon, Woo Hyung; Lee, Phil Ho

    2014-06-06

    An efficient synthetic method of 2-aryl-2H-benzotriazoles from nonprefunctionalized azobenzenes and N-sulfonyl azides via sequential Rh-catalyzed amidation (C-N bond formation) and oxidation (N-N bond formation) with PhI(OAc)2 in one pot is reported.

  11. Self-assembly and antimicrobial activity of long-chain amide-functionalized ionic liquids in aqueous solution.

    Science.gov (United States)

    Garcia, M Teresa; Ribosa, Isabel; Perez, Lourdes; Manresa, Angeles; Comelles, Francesc

    2014-11-01

    Surface active amide-functionalized ionic liquids (ILs) consisting of a long alkyl chain (C6C14) connected to a polar head group (methylimidazolium or pyridinium cation) via an amide functional group were synthesized and their thermal stability, micellar properties and antimicrobial activity in aqueous solution investigated. The incorporation of an amide group increased the thermal stability of the functionalized ionic liquids compared to simple alkyl chain substituted ionic liquids. The surface activity and aggregation behaviour in aqueous solution of amide-functionalized ionic liquids were examined by tensiometry, conductivity and spectrofluorimetry. Amide-functionalized ILs displayed surface activity and their critical micelle concentration (cmc) in aqueous media decreased with the elongation of the alkyl side chain as occurs for typical surfactants. Compared to non-functionalized ILs bearing the same alkyl chain, ionic liquids with an amide moiety possess higher surface activity (pC20) and lower cmc values. The introduction of an amide group in the hydrophobic chain close to the polar head enhances adsorption at the air/water interface and micellization which could be attributed to the H-bonding in the headgroup region. The antimicrobial activity was evaluated against a panel of representative Gram-negative and Gram-positive bacteria and fungi. Amide-functionalized ILs with more than eight carbon atoms in the side chain showed broad antimicrobial activity. Antibacterial activities were found to increase with the alkyl chain length being the C12 homologous the most effective antimicrobial agents. The introduction of an amide group enhanced significantly the antifungal activity as compared to non-functionalized ILs. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Control of O-H bonds at a-IGZO/SiO2 interface by long time thermal annealing for highly stable oxide TFT

    Directory of Open Access Journals (Sweden)

    Jae Kwon Jeon

    2017-12-01

    Full Text Available We report two-step annealing, high temperature and sequent low temperature, for amorphous indium-gallium-zinc-oxide (a-IGZO thin-film transistor (TFT to improve its stability and device performance. The annealing is carried out at 300 oC in N2 ambient for 1 h (1st step annealing and then at 250 oC in vacuum for 10 h (2nd step annealing. It is found that the threshold voltage (VTH changes from 0.4 V to -2.0 V by the 1st step annealing and to +0.6 V by 2nd step annealing. The mobility changes from 18 cm2V-1s-1 to 25 cm2V-1s-1 by 1st step and decreases to 20 cm2V-1s-1 by 2nd step annealing. The VTH shift by positive bias temperature stress (PBTS is 3.7 V for the as-prepared TFT, and 1.7 V for the 1st step annealed TFT, and 1.3 V for the 2nd step annealed TFT. The XPS (X-ray photoelectron spectroscopy depth analysis indicates that the reduction in O-H bonds at the top interface (SiO2/a-IGZO by 2nd step annealing appears, which is related to the positive VTH shift and smaller VTH shift by PBTS.

  13. 1D and 2D NMR Spectroscopy of Bonding Interactions within Stable and Phase-Separating Organic Electrolyte-Cellulose Solutions.

    Science.gov (United States)

    Clough, Matthew T; Farès, Christophe; Rinaldi, Roberto

    2017-09-11

    Organic electrolyte solutions (i.e. mixtures containing an ionic liquid and a polar, molecular co-solvent) are highly versatile solvents for cellulose. However, the underlying solvent-solvent and solvent-solute interactions are not yet fully understood. Herein, mixtures of the ionic liquid 1-ethyl-3-methylimidazolium acetate, the co-solvent 1,3-dimethyl-2-imidazolidinone, and cellulose are investigated using 1D and 2D NMR spectroscopy. The use of a triply- 13 C-labelled ionic liquid enhances the signal-to-noise ratio for 13 C NMR spectroscopy, enabling changes in bonding interactions to be accurately pinpointed. Current observations reveal an additional degree of complexity regarding the distinct roles of cation, anion, and co-solvent toward maintaining cellulose solubility and phase stability. Unexpectedly, the interactions between the dialkylimidazolium ring C 2 -H substituent and cellulose become more pronounced at high temperatures, counteracted by a net weakening of acetate-cellulose interactions. Moreover, for mixtures that exhibit critical solution behavior, phase separation is accompanied by the apparent recombination of cation-anion pairs. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Direct enantioselective conjugate addition of carboxylic acids with chiral lithium amides as traceless auxiliaries.

    Science.gov (United States)

    Lu, Ping; Jackson, Jeffrey J; Eickhoff, John A; Zakarian, Armen

    2015-01-21

    Michael addition is a premier synthetic method for carbon-carbon and carbon-heteroatom bond formation. Using chiral dilithium amides as traceless auxiliaries, we report the direct enantioselective Michael addition of carboxylic acids. A free carboxyl group in the product provides versatility for further functionalization, and the chiral reagent can be readily recovered by extraction with aqueous acid. The method has been applied in the enantioselective total synthesis of the purported structure of pulveraven B.

  15. Restricted amide rotation with steric hindrance induced multiple conformations

    Science.gov (United States)

    Krishnan, V. V.; Vazquez, Salvador; Maitra, Kalyani; Maitra, Santanu

    2017-12-01

    The Csbnd N bond character is dependent directly upon the resonance-contributor structure population driven by the delocalized nitrogen lone-pair of electrons. In the case of N, N-dibenzyl-ortho-toluamide (o-DBET), the molecule adopts subpopulations of conformers with distinct NMR spectral features, particularly at low temperatures. This conformational adaptation is unique to o-DBET, while the corresponding meta- and para- forms do not show such behavior. Variable-temperature (VT) NMR, two-dimensional exchange spectroscopy (EXSY), and qualitative molecular modeling studies are used to demonstrate how multiple competing interactions such as restricted amide rotation and steric hindrance effects can lead to versatile molecular adaptations in the solution state.

  16. Additional disulfide bonds in insulin

    DEFF Research Database (Denmark)

    Vinther, Tine N; Pettersson, Ingrid; Huus, Kasper

    2015-01-01

    The structure of insulin, a glucose homeostasis-controlling hormone, is highly conserved in all vertebrates and stabilized by three disulfide bonds. Recently, we designed a novel insulin analogue containing a fourth disulfide bond located between positions A10-B4. The N-terminus of insulin's B......-chain is flexible and can adapt multiple conformations. We examined how well disulfide bond predictions algorithms could identify disulfide bonds in this region of insulin. In order to identify stable insulin analogues with additional disulfide bonds, which could be expressed, the Cβ cut-off distance had...... in comparison to analogues with additional disulfide bonds that were more difficult to predict. In contrast, addition of the fourth disulfide bond rendered all analogues resistant to fibrillation under stress conditions and all stable analogues bound to the insulin receptor with picomolar affinities. Thus...

  17. Biodegradable gadolinium-chelated cationic poly(urethane amide) copolymers for gene transfection and magnetic resonance imaging

    International Nuclear Information System (INIS)

    Gao, Xiaolong; Wang, Gangmin; Shi, Ting; Shao, Zhihong; Zhao, Peng; Shi, Donglu; Ren, Jie; Lin, Chao; Wang, Peijun

    2016-01-01

    Theranostic nano-polyplexes containing gene and imaging agents hold a great promise for tumor diagnosis and therapy. In this work, we develop a group of new gadolinium (Gd)-chelated cationic poly(urethane amide)s for gene delivery and T 1 -weighted magnetic resonance (MR) imaging. Cationic poly(urethane amide)s (denoted as CPUAs) having multiple disulfide bonds, urethane and amide linkages were synthesized by stepwise polycondensation reaction between 1,4-bis(3-aminopropyl)piperazine and a mixture of di(4-nitrophenyl)-2, 2′-dithiodiethanocarbonate (DTDE-PNC) and diethylenetriaminepentaacetic acid (DTPA) dianhydride at varied molar ratios. Then, Gd-chelated CPUAs (denoted as GdCPUAs) were produced by chelating Gd(III) ions with DTPA residues of CPUAs. These GdCPUAs could condense gene into nanosized and positively-charged polyplexes in a physiological condition and, however, liberated gene in an intracellular reductive environment. In vitro transfection experiments revealed that the GdCPUA at a DTDE-PNC/DTPA residue molar ratio of 85/15 induced the highest transfection efficiency in different cancer cells. This efficiency was higher than that yielded with 25 kDa branched polyethylenimine as a positive control. GdCPUAs and their polyplexes exhibited low cytotoxicity when an optimal transfection activity was detected. Moreover, GdCPUAs may serve as contrast agents for T 1 -weighted magnetic resonance imaging. The results of this work indicate that biodegradable Gd-chelated cationic poly(urethane amide) copolymers have high potential for tumor theranostics. - Highlights: • Novel cationic gadolinium-chelated poly(urethane amide)s (GdCPUAs) are prepared. • GdCPUAs can induce a high transfection efficacy in different cancer cells. • GdCPUAs reveal good cyto-compatibility against cancer cells. • GdCPUAs may be applied as T 1 -contrast agents for magnetic resonance imaging. • GdCPUAs hold high potential for cancer theranostics.

  18. Effect of amides on lithium tetraborate solubility

    International Nuclear Information System (INIS)

    Tsekhanskij, R.S.; Skvortsov, V.C.; Molodkin, A.K.; Sadetdi- pov, Sh.V.

    1983-01-01

    Using the methods of solubility, densi- and refractometry at 25 deg C, it has been established that the systemS lithium tetraborate-formamide (acetamide, dimethyl-formamide)-water are of a simple eutonic type. Amides decrease the salt solubility. Lyotropic effect, as calculated for molar concentrations (-Lsub(M)) relative to the absolute value, increases from formamide to dimethylformamide. The sequence is determined by the fact that, when there is one or two hydrophilic methyl groups in amide molecules which are in contact with tetraborate, they decrease the hydration energy of lithium cations

  19. Effect of amides on sodium tetraborate solubility

    International Nuclear Information System (INIS)

    Tsekhanskij, R.S.; Skvortsov, V.G.; Molodkin, A.K.; Sadetdinov, Sh.V.

    1986-01-01

    Methods of solubility and refractometry at 25 deg C were applied to investigate sodium tetraborate - formamide (dimethylformamide) - water systems. It is stated that they are of simple eutonic type as well as the earlier described sodium tetraborate-acetamide-water system. Amides reduce solubility of the salt. The effect of contact interaction between dissolved substances on salt cation hydration and thus on the value of liotropic amide effect is confirmed. This value is found to be also depend on the number of molecules of coordination water in the initial crystalline hydrate

  20. Aromatic amide and hydrazide foldamer-based responsive host-guest systems.

    Science.gov (United States)

    Zhang, Dan-Wei; Zhao, Xin; Li, Zhan-Ting

    2014-07-15

    CONSPECTUS: In host-guest chemistry, a larger host molecule selectively and noncovalently binds to a smaller guest molecule or ion. Early studies of host-guest chemistry focused on the recognition of spherical metal or ammonium ions by macrocyclic hosts, such as cyclic crown ethers. In these systems, preorganization enables their binding sites to cooperatively contact and attract a guest. Although some open-chain crown ether analogues possess similar, but generally lower, binding affinities, the design of acyclic molecular recognition hosts has remained challenging. One of the most successful examples was rigid molecular tweezers, acyclic covalently bonded preorganized host molecules with open cavities that bind tightly as they stiffen. Depending on the length of the atomic backbones, hydrogen bonding-driven aromatic amide foldamers can form open or closed cavities. Through rational design of the backbones and the introduction of added functional groups, researchers can regulate the shape and size of the cavity. The directionality of hydrogen bonding and the inherent rigidity of aromatic amide units allow researchers to predict both the shape and size of the cavity of an aromatic amide foldamer. Therefore, researchers can then design guest molecules with structure that matches the cavity shape, size, and binding sites of the foldamer host. In addition, because hydrogen bonds are dynamic, researchers can design structures that can adapt to outside stimuli to produce responsive supramolecular architectures. In this Account, we discuss how aromatic amide and hydrazide foldamers induced by hydrogen bonding can produce responsive host-guest systems, based on research by our group and others. First we highlight the helical chirality induced as binding occurs in solution, which includes the induction of helicity by chiral guests in oligomeric and polymeric foldamers, the formation of diastereomeric complexes between chiral foldamer hosts and guests, and the induction of

  1. Investigation of the complex reaction coordinate of acid catalyzed amide hydrolysis from molecular dynamics simulations

    International Nuclear Information System (INIS)

    Zahn, Dirk

    2004-01-01

    The rate-determining step of acid catalyzed peptide hydrolysis is the nucleophilic attack of a water molecule to the carbon atom of the amide group. Therein the addition of the hydroxyl group to the amide carbon atom involves the association of a water molecule transferring one of its protons to an adjacent water molecule. The protonation of the amide nitrogen atom follows as a separate reaction step. Since the nucleophilic attack involves the breaking and formation of several bonds, the underlying reaction coordinate is rather complex. We investigate this reaction step from path sampling Car-Parrinello molecular dynamics simulations. This approach does not require the predefinition of reaction coordinates and is thus particularly suited for investigating reaction mechanisms. From our simulations the most relevant components of the reaction coordinate are elaborated. Though the C···O distance of the oxygen atom of the water molecule performing the nucleophilic attack and the corresponding amide carbon atom is a descriptor of the reaction progress, a complete picture of the reaction coordinate must include all three molecules taking part in the reaction. Moreover, the proton transfer is found to depend on favorable solvent configurations. Thus, also the arrangement of non-reacting, i.e. solvent water molecules needs to be considered in the reaction coordinate

  2. cis–trans-Amide isomerism of the 3,4-dehydroproline residue, the ‘unpuckered’ proline

    Directory of Open Access Journals (Sweden)

    Vladimir Kubyshkin

    2016-03-01

    Full Text Available Proline (Pro is an outstanding amino acid in various biochemical and physicochemical perspectives, especially when considering the cis–trans isomerism of the peptidyl-Pro amide bond. Elucidation of the roles of Pro in chemical or biological systems and engineering of its features can be addressed with various Pro analogues. Here we report an experimental work investigating the basic physicochemical properties of two Pro analogues which possess a 3,4-double bond: 3,4-dehydroproline and 4-trifluoromethyl-3,4-dehydroproline. Both indicate a flat pyrroline ring in their crystal structures, in agreement with previous theoretical calculations. In solution, the peptide mimics exhibit an almost unchanged equilibrium of the trans/cis ratios compared to that of Pro and 4-trifluoromethylproline derivatives. Finally we demonstrate that the 3,4-double bond in the investigated structures leads to an increase of the amide rotational barriers, presumably due to an interplay with the transition state.

  3. Amides and an alkaloid from Portulaca oleracea.

    Science.gov (United States)

    Kokubun, Tetsuo; Kite, Geoffrey C; Veitch, Nigel C; Simmonds, Monique S J

    2012-08-01

    A total of 16 phenolic compounds, including one new and five known N-cinnamoyl phenylethylamides, one new pyrrole alkaloid named portulacaldehyde, five phenylpropanoid acids and amides, and derivatives of benzaldehyde and benzoic acid, were isolated and identified from a polar fraction of an extract of Portulaca oleracea. Their structures were determined through spectroscopic analyses.

  4. Metabolism of amino acid amides in Pseudomonas putida ATCC 12633

    NARCIS (Netherlands)

    Hermes, H.F.M.; Croes, L.M.; Peeters, W.P.H.; Peters, P.J.H.; Dijkhuizen, L.

    1993-01-01

    The metabolism of the natural amino acid L-valine, the unnatural amino acids D-valine, and D-, L-phenylglycine (D-, L-PG), and the unnatural amino acid amides D-, L-phenylglycine amide (D, L-PG-NH2) and L-valine amide (L-Val-NH2) was studied in Pseudomonas putida ATCC 12633. The organism possessed

  5. A hydrogen-bonding network plays a catalytic role in photosynthetic oxygen evolution

    Science.gov (United States)

    Polander, Brandon C.; Barry, Bridgette A.

    2012-01-01

    In photosystem II, oxygen evolution occurs by the accumulation of photo-induced oxidizing equivalents at the oxygen-evolving complex (OEC). The sequentially oxidized states are called the S0-S4 states, and the dark stable state is S1. Hydrogen bonds to water form a network around the OEC; this network is predicted to involve multiple peptide carbonyl groups. In this work, we tested the idea that a network of hydrogen bonded water molecules plays a catalytic role in water oxidation. As probes, we used OEC peptide carbonyl frequencies, the substrate-based inhibitor, ammonia, and the sugar, trehalose. Reaction-induced FT-IR spectroscopy was used to describe the protein dynamics associated with the S1 to S2 transition. A shift in an amide CO vibrational frequency (1664 (S1) to 1653 (S2) cm-1) was observed, consistent with an increase in hydrogen bond strength when the OEC is oxidized. Treatment with ammonia/ammonium altered these CO vibrational frequencies. The ammonia-induced spectral changes are attributed to alterations in hydrogen bonding, when ammonia/ammonium is incorporated into the OEC hydrogen bond network. The ammonia-induced changes in CO frequency were reversed or blocked when trehalose was substituted for sucrose. This trehalose effect is attributed to a displacement of ammonia molecules from the hydrogen bond network. These results imply that ammonia, and by extension water, participate in a catalytically essential hydrogen bond network, which involves OEC peptide CO groups. Comparison to the ammonia transporter, AmtB, reveals structural similarities with the bound water network in the OEC. PMID:22474345

  6. (NHC)Cu-Catalyzed Mild C-H Amidation of (Hetero)arenes with Deprotectable Carbamates: Scope and Mechanistic Studies.

    Science.gov (United States)

    Xie, Weilong; Yoon, Jung Hee; Chang, Sukbok

    2016-09-28

    Primary arylamines are an important unit broadly found in synthetic, biological, and materials science. Herein we describe the development of a (NHC)Cu system that mediates a direct C-H amidation of (hetero)arenes by using N-chlorocarbamates or their sodio derivatives as the practical amino sources. A facile stoichiometric reaction of reactive copper-aryl intermediates with the amidating reagent led us to isolate key copper arylcarbamate species with the formation of a C-N bond. The use of (t)BuONa base made this transformation catalytic under mild conditions. The present (NHC)Cu-catalyzed C-H amidation works efficiently and selectively on a large scale over a range of arenes including polyfluorobenzenes, azoles, and quinoline N-oxides. Deprotection of the newly installed carbamate groups such as Boc and Cbz was readily performed to afford the corresponding primary arylamines.

  7. Amide linkages mimic phosphates in RNA interactions with proteins and are well tolerated in the guide strand of short interfering RNAs

    Science.gov (United States)

    Mutisya, Daniel; Hardcastle, Travis; Cheruiyot, Samwel K.; Pallan, Pradeep S.; Kennedy, Scott D.; Egli, Martin; Kelley, Melissa L.; Smith, Anja van Brabant

    2017-01-01

    Abstract While the use of RNA interference (RNAi) in molecular biology and functional genomics is a well-established technology, in vivo applications of synthetic short interfering RNAs (siRNAs) require chemical modifications. We recently found that amides as non-ionic replacements for phosphodiesters may be useful modifications for optimization of siRNAs. Herein, we report a comprehensive study of systematic replacement of a single phosphate with an amide linkage throughout the guide strand of siRNAs. The results show that amides are surprisingly well tolerated in the seed and central regions of the guide strand and increase the silencing activity when placed between nucleosides 10 and 12, at the catalytic site of Argonaute. A potential explanation is provided by the first crystal structure of an amide-modified RNA–DNA with Bacillus halodurans RNase H1. The structure reveals how small changes in both RNA and protein conformation allow the amide to establish hydrogen bonding interactions with the protein. Molecular dynamics simulations suggest that these alternative binding modes may compensate for interactions lost due to the absence of a phosphodiester moiety. Our results suggest that an amide can mimic important hydrogen bonding interactions with proteins required for RNAi activity and may be a promising modification for optimization of biological properties of siRNAs. PMID:28854734

  8. Amide linkages mimic phosphates in RNA interactions with proteins and are well tolerated in the guide strand of short interfering RNAs.

    Science.gov (United States)

    Mutisya, Daniel; Hardcastle, Travis; Cheruiyot, Samwel K; Pallan, Pradeep S; Kennedy, Scott D; Egli, Martin; Kelley, Melissa L; Smith, Anja van Brabant; Rozners, Eriks

    2017-08-21

    While the use of RNA interference (RNAi) in molecular biology and functional genomics is a well-established technology, in vivo applications of synthetic short interfering RNAs (siRNAs) require chemical modifications. We recently found that amides as non-ionic replacements for phosphodiesters may be useful modifications for optimization of siRNAs. Herein, we report a comprehensive study of systematic replacement of a single phosphate with an amide linkage throughout the guide strand of siRNAs. The results show that amides are surprisingly well tolerated in the seed and central regions of the guide strand and increase the silencing activity when placed between nucleosides 10 and 12, at the catalytic site of Argonaute. A potential explanation is provided by the first crystal structure of an amide-modified RNA-DNA with Bacillus halodurans RNase H1. The structure reveals how small changes in both RNA and protein conformation allow the amide to establish hydrogen bonding interactions with the protein. Molecular dynamics simulations suggest that these alternative binding modes may compensate for interactions lost due to the absence of a phosphodiester moiety. Our results suggest that an amide can mimic important hydrogen bonding interactions with proteins required for RNAi activity and may be a promising modification for optimization of biological properties of siRNAs. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  9. Amide linkages mimic phosphates in RNA interactions with proteins and are well tolerated in the guide strand of short interfering RNAs

    Energy Technology Data Exchange (ETDEWEB)

    Mutisya, Daniel; Hardcastle, Travis; Cheruiyot, Samwel K.; Pallan, Pradeep S.; Kennedy, Scott D.; Egli, Martin; Kelley, Melissa L.; Smith, Anja van Brabant; Rozners, Eriks

    2017-06-27

    While the use of RNA interference (RNAi) in molecular biology and functional genomics is a well-established technology, in vivo applications of synthetic short interfering RNAs (siRNAs) require chemical modifications. We recently found that amides as non-ionic replacements for phosphodiesters may be useful modifications for optimization of siRNAs. Herein, we report a comprehensive study of systematic replacement of a single phosphate with an amide linkage throughout the guide strand of siRNAs. The results show that amides are surprisingly well tolerated in the seed and central regions of the guide strand and increase the silencing activity when placed between nucleosides 10 and 12, at the catalytic site of Argonaute. A potential explanation is provided by the first crystal structure of an amide-modified RNA–DNA with Bacillus halodurans RNase H1. The structure reveals how small changes in both RNA and protein conformation allow the amide to establish hydrogen bonding interactions with the protein. Molecular dynamics simulations suggest that these alternative binding modes may compensate for interactions lost due to the absence of a phosphodiester moiety. Our results suggest that an amide can mimic important hydrogen bonding interactions with proteins required for RNAi activity and may be a promising modification for optimization of biological properties of siRNAs.

  10. Non-equilibrium hydrogen exchange for determination of H-bond strength and water accessibility in solid proteins.

    Science.gov (United States)

    Grohe, Kristof; Movellan, Kumar Tekwani; Vasa, Suresh Kumar; Giller, Karin; Becker, Stefan; Linser, Rasmus

    2017-05-01

    We demonstrate measurement of non-equilibrium backbone amide hydrogen-deuterium exchange rates (HDX) for solid proteins. The target of this study are the slowly exchanging residues in solid samples, which are associated with stable secondary-structural elements of proteins. These hydrogen exchange processes escape methods measuring equilibrium exchange rates of faster processes. The method was applied to a micro-crystalline preparation of the SH3 domain of chicken α-spectrin. Therefore, from a 100% back-exchanged micro-crystalline protein preparation, the supernatant buffer was exchanged by a partially deuterated buffer to reach a final protonation level of approximately 20% before packing the sample in a 1.3 mm rotor. Tracking of the HN peak intensities for 2 weeks reports on site-specific hydrogen bond strength and also likely reflects water accessibility in a qualitative manner. H/D exchange can be directly determined for hydrogen-bonded amides using 1 H detection under fast magic angle spinning. This approach complements existing methods and provides the means to elucidate interesting site-specific characteristics for protein functionality in the solid state.

  11. Amides from Piper capense with CNS Activity – A Preliminary SAR Analysis

    Directory of Open Access Journals (Sweden)

    Hasse B. Rasmussen

    2009-09-01

    Full Text Available Piper capense L.f. (Piperaceae is used traditionally in South Africa as a sleep inducing remedy. Bioassay-guided fractionation of the roots of P. capense led to the isolation of piperine (1 and 4,5-dihydropiperine (2, which showed moderate affinity for the benzodiazepine site on the GABAA receptor (IC50 values of 1.2 mM and 1.0 mM, respectively. The present study suggests that strict structural properties of the amides are essential for affinity. Taken together, these observations suggest that the carbon chain must contain not less than four carbons, and that a conjugated double bond, adjacent to the amide group, is necessary for binding to the receptor and that the amine part should be bulky.

  12. Protein topology determines cysteine oxidation fate: the case of sulfenyl amide formation among protein families.

    Science.gov (United States)

    Defelipe, Lucas A; Lanzarotti, Esteban; Gauto, Diego; Marti, Marcelo A; Turjanski, Adrián G

    2015-03-01

    Cysteine residues have a rich chemistry and play a critical role in the catalytic activity of a plethora of enzymes. However, cysteines are susceptible to oxidation by Reactive Oxygen and Nitrogen Species, leading to a loss of their catalytic function. Therefore, cysteine oxidation is emerging as a relevant physiological regulatory mechanism. Formation of a cyclic sulfenyl amide residue at the active site of redox-regulated proteins has been proposed as a protection mechanism against irreversible oxidation as the sulfenyl amide intermediate has been identified in several proteins. However, how and why only some specific cysteine residues in particular proteins react to form this intermediate is still unknown. In the present work using in-silico based tools, we have identified a constrained conformation that accelerates sulfenyl amide formation. By means of combined MD and QM/MM calculation we show that this conformation positions the NH backbone towards the sulfenic acid and promotes the reaction to yield the sulfenyl amide intermediate, in one step with the concomitant release of a water molecule. Moreover, in a large subset of the proteins we found a conserved beta sheet-loop-helix motif, which is present across different protein folds, that is key for sulfenyl amide production as it promotes the previous formation of sulfenic acid. For catalytic activity, in several cases, proteins need the Cysteine to be in the cysteinate form, i.e. a low pKa Cys. We found that the conserved motif stabilizes the cysteinate by hydrogen bonding to several NH backbone moieties. As cysteinate is also more reactive toward ROS we propose that the sheet-loop-helix motif and the constraint conformation have been selected by evolution for proteins that need a reactive Cys protected from irreversible oxidation. Our results also highlight how fold conservation can be correlated to redox chemistry regulation of protein function.

  13. The amide III vibrational circular dichroism band as a probe to detect conformational preferences of alanine dipeptide in water.

    Science.gov (United States)

    Mirtič, Andreja; Merzel, Franci; Grdadolnik, Jože

    2014-07-01

    The conformational preferences of blocked alanine dipeptide (ADP), Ac-Ala-NHMe, in aqueous solution were studied using vibrational circular dichroism (VCD) together with density functional theory (DFT) calculations. DFT calculations of three most representative conformations of ADP surrounded by six explicit water molecules immersed in a dielectric continuum have proven high sensitivity of amide III VCD band shape that is characteristic for each conformation of the peptide backbone. The polyproline II (PII ) and αR conformation of ADP are associated with a positive VCD band while β conformation has a negative VCD band in amide III region. Knowing this spectral characteristic of each conformation allows us to assign the experimental amide III VCD spectrum of ADP. Moreover, the amide III region of the VCD spectrum was used to determine the relative populations of conformations of ADP in water. Based on the interpretation of the amide III region of VCD spectrum we have shown that dominant conformation of ADP in water is PII which is stabilized by hydrogen bonded water molecules between CO and NH groups on the peptide backbone. Copyright © 2014 Wiley Periodicals, Inc.

  14. Synthesis and uses of the amides extractants

    International Nuclear Information System (INIS)

    Musikas, C.

    1989-01-01

    Carboxylic acids amides (RR'NCOCR''), malonic acid amides (RR'NCOCH 2 CONRR') and substituted malonic acid amides (RR'NCOCHR'' CONRR') are extractants of the actinides ions. They show good prospects for use in the nuclear industry because of their complete incinerability. In addition, their degradation products interfer much more less in the separation processes when compared with organophosphorus extractants. The synthesis and the purification of two typical extractants: N-N-di (2-ethylhexyl) butyramide (C 4 H 9 CHC 2 H 5 CH 2 ) 2 NCOC 3 H 7 and N,N'-dimethyl N,N'-dibutyl 1.3 diamide 2(3-oxa)nonyl propane (C 4 H 9 CH 3 NCO) 2 CHC 2 H 4 OC 6 H 13 are described. The purities, checked by NMR, elemental analysis and potentiometry, were in the range 98 to 99.5%. The yields for monoamides were in the range 70 to 90% and for the diamides 20 to 40%. 3 figs, 3 tabs, 10 refs

  15. NMR Analysis of Amide Hydrogen Exchange Rates in a Pentapeptide-Repeat Protein from A. thaliana.

    Science.gov (United States)

    Xu, Shenyuan; Ni, Shuisong; Kennedy, Michael A

    2017-05-23

    At2g44920 from Arabidopsis thaliana is a pentapeptide-repeat protein (PRP) composed of 25 repeats capped by N- and C-terminal α-helices. PRP structures are dominated by four-sided right-handed β-helices typically consisting of mixtures of type II and type IV β-turns. PRPs adopt repeated five-residue (Rfr) folds with an Rfr consensus sequence (STAV)(D/N)(L/F)(S/T/R)(X). Unlike other PRPs, At2g44920 consists exclusively of type II β-turns. At2g44920 is predicted to be located in the thylakoid lumen although its biochemical function remains unknown. Given its unusual structure, we investigated the biophysical properties of At2g44920 as a representative of the β-helix family to determine if it had exceptional global stability, backbone dynamics, or amide hydrogen exchange rates. Circular dichroism measurements yielded a melting point of 62.8°C, indicating unexceptional global thermal stability. Nuclear spin relaxation measurements indicated that the Rfr-fold core was rigid with order parameters ranging from 0.7 to 0.9. At2g44920 exhibited a striking range of amide hydrogen exchange rates spanning 10 orders of magnitude, with lifetimes ranging from minutes to several months. A weak correlation was found among hydrogen exchange rates, hydrogen bonding energies, and amino acid solvent-accessible areas. Analysis of contributions from fast (approximately picosecond to nanosecond) backbone dynamics to amide hydrogen exchange rates revealed that the average order parameter of amides undergoing fast exchange was significantly smaller compared to those undergoing slow exchange. Importantly, the activation energies for amide hydrogen exchange were found to be generally higher for the slowest exchanging amides in the central Rfr coil and decreased toward the terminal coils. This could be explained by assuming that the concerted motions of two preceding or following coils required for hydrogen bond disruption and amide hydrogen exchange have a higher activation energy

  16. Influence of hydrogen bonding on the generation and stabilization of ...

    Indian Academy of Sciences (India)

    ety totally vanquished liquid crystalline phases while biphenylene and naphthalene units did only reduce the transition .... firms the fact that during heating some of the amide–ester hydrogen bonds change into amide–amide ... their potential applications in LC displays, NLO materials, information storage devices etc. [12].

  17. New Umami Amides: Structure-Taste Relationship Studies of Cinnamic Acid Derived Amides and the Natural Occurrence of an Intense Umami Amide in Zanthoxylum piperitum.

    Science.gov (United States)

    Frerot, Eric; Neirynck, Nathalie; Cayeux, Isabelle; Yuan, Yoyo Hui-Juan; Yuan, Yong-Ming

    2015-08-19

    A series of aromatic amides were synthesized from various acids and amines selected from naturally occurring structural frameworks. These synthetic amides were evaluated for umami taste in comparison with monosodium glutamate. The effect of the substitution pattern of both the acid and the amine parts on umami taste was investigated. The only intensely umami-tasting amides were those made from 3,4-dimethoxycinnamic acid. The amine part was more tolerant to structural changes. Amides bearing an alkyl- or alkoxy-substituted phenylethylamine residue displayed a clean umami taste as 20 ppm solutions in water. Ultraperformance liquid chromatography coupled with a high quadrupole-Orbitrap mass spectrometer (UPLC/MS) was subsequently used to show the natural occurrence of these amides. (E)-3-(3,4-Dimethoxyphenyl)-N-(4-methoxyphenethyl)acrylamide was shown to occur in the roots and stems of Zanthoxylum piperitum, a plant of the family Rutaceae growing in Korea, Japan, and China.

  18. Acylated apelin-13 amide analogues exhibit enzyme resistance and prolonged insulin releasing, glucose lowering and anorexic properties.

    Science.gov (United States)

    O'Harte, Finbarr P M; Parthsarathy, Vadivel; Hogg, Christopher; Flatt, Peter R

    2017-12-15

    The adipokine, apelin has many biological functions but its activity is curtailed by rapid plasma degradation. Fatty acid derived apelin analogues represent a new and exciting avenue for the treatment of obesity-diabetes. This study explores four novel fatty acid modified apelin-13 analogues, namely, (Lys 8 GluPAL)apelin-13 amide, pGlu(Lys 8 GluPAL)apelin-13 amide, Lys 8 GluPAL(Tyr 13 )apelin-13 and Lys 8 GluPAL(Val 13 )apelin-13. Fatty acid modification extended the half-life of native apelin-13 to >24 h in vitro. pGlu(Lys 8 GluPAL)apelin-13 amide was the most potent insulinotropic analogue in BRIN-BD11 cells and isolated islets with maximal stimulatory effects of up to 2.7-fold (p glucose uptake in 3T3-L1 adipocytes (2.3-fold, p glucose (39-43%, p glucose tolerance tests in diet-induced obese mice. pGlu(Lys 8 GluPAL)apelin-13 amide and (Lys 8 GluPAL)apelin-13 amide also inhibited feeding (28-40%, p < .001), whereas Lys 8 GluPAL(Val 13 )apelin-13 increased food intake (8%, p < .05) in mice. These data indicate that novel enzymatically stable analogues of apelin-13 may be suitable for future development as therapeutic agents for obesity-diabetes. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Glutamic Acid Selective Chemical Cleavage of Peptide Bonds.

    Science.gov (United States)

    Nalbone, Joseph M; Lahankar, Neelam; Buissereth, Lyssa; Raj, Monika

    2016-03-04

    Site-specific hydrolysis of peptide bonds at glutamic acid under neutral aqueous conditions is reported. The method relies on the activation of the backbone amide chain at glutamic acid by the formation of a pyroglutamyl (pGlu) imide moiety. This activation increases the susceptibility of a peptide bond toward hydrolysis. The method is highly specific and demonstrates broad substrate scope including cleavage of various bioactive peptides with unnatural amino acid residues, which are unsuitable substrates for enzymatic hydrolysis.

  20. Kinetics of Free Radical Polymerization of N-Substituted Amides and Their Structural Implications

    Directory of Open Access Journals (Sweden)

    Anca Aldea

    2016-01-01

    Full Text Available Two N-substituted amides (N-acryloyl morpholine and N-methyl-N-vinylacetamide were polymerized in different solvents using radical initiator. The tacticity of obtained polymers was determined by 400 MHz 1H-NMR and 13C-NMR. At a given temperature, the syndiotacticity increased with increasing the solvent polarity. This solvent effect may be related to the hydrogen bonding interaction among solvent, monomer, and/or growing species. A peculiar aspect regards the steric hindrance at the nitrogen atom.

  1. Analytical applications of resins containing amide and polyamine functional groups

    International Nuclear Information System (INIS)

    Orf, G.M.

    1977-12-01

    A dibutyl amide resin is used for the separation of uranium(VI), thorium(IV), and zirconium(IV) from each other and several other metal ions. Uranium(VI) and thorium(IV) are determined in the presence of large excesses of foreign metal ions and anions. A practical application of the amide resin is studied by determining uranium in low grade uranium ores. The amide resin is also used for the selective concentration of gold(III) from sea water

  2. SOLID-PHASE PEPTIDE SYNTHESIS OF ISOTOCIN WITH AMIDE ...

    African Journals Online (AJOL)

    SOLID-PHASE PEPTIDE SYNTHESIS OF ISOTOCIN WITH AMIDE OF ASPARAGINE PROTECTED WITH 1-TETRALINYL. TRIFLUOROMETHANESULPHONIC ACID (TFMSA) DEPROTECTION, CLEAVAGE AND AIR OXIDATION OF MERCAPTO GROUPS TO DISULPHIDE.

  3. Parental Bonding

    Directory of Open Access Journals (Sweden)

    T. Paul de Cock

    2014-08-01

    Full Text Available Estimating the early parent–child bonding relationship can be valuable in research and practice. Retrospective dimensional measures of parental bonding provide a means for assessing the experience of the early parent–child relationship. However, combinations of dimensional scores may provide information that is not readily captured with a dimensional approach. This study was designed to assess the presence of homogeneous groups in the population with similar profiles on parental bonding dimensions. Using a short version of the Parental Bonding Instrument (PBI, three parental bonding dimensions (care, authoritarianism, and overprotection were used to assess the presence of unobserved groups in the population using latent profile analysis. The class solutions were regressed on 23 covariates (demographics, parental psychopathology, loss events, and childhood contextual factors to assess the validity of the class solution. The results indicated four distinct profiles of parental bonding for fathers as well as mothers. Parental bonding profiles were significantly associated with a broad range of covariates. This person-centered approach to parental bonding has broad utility in future research which takes into account the effect of parent–child bonding, especially with regard to “affectionless control” style parenting.

  4. Catalytic alkylation of remote C-H bonds enabled by proton-coupled electron transfer.

    Science.gov (United States)

    Choi, Gilbert J; Zhu, Qilei; Miller, David C; Gu, Carol J; Knowles, Robert R

    2016-11-10

    Despite advances in hydrogen atom transfer (HAT) catalysis, there are currently no molecular HAT catalysts that are capable of homolysing the strong nitrogen-hydrogen (N-H) bonds of N-alkyl amides. The motivation to develop amide homolysis protocols stems from the utility of the resultant amidyl radicals, which are involved in various synthetically useful transformations, including olefin amination and directed carbon-hydrogen (C-H) bond functionalization. In the latter process-a subset of the classical Hofmann-Löffler-Freytag reaction-amidyl radicals remove hydrogen atoms from unactivated aliphatic C-H bonds. Although powerful, these transformations typically require oxidative N-prefunctionalization of the amide starting materials to achieve efficient amidyl generation. Moreover, because these N-activating groups are often incorporated into the final products, these methods are generally not amenable to the direct construction of carbon-carbon (C-C) bonds. Here we report an approach that overcomes these limitations by homolysing the N-H bonds of N-alkyl amides via proton-coupled electron transfer. In this protocol, an excited-state iridium photocatalyst and a weak phosphate base cooperatively serve to remove both a proton and an electron from an amide substrate in a concerted elementary step. The resultant amidyl radical intermediates are shown to promote subsequent C-H abstraction and radical alkylation steps. This C-H alkylation represents a catalytic variant of the Hofmann-Löffler-Freytag reaction, using simple, unfunctionalized amides to direct the formation of new C-C bonds. Given the prevalence of amides in pharmaceuticals and natural products, we anticipate that this method will simplify the synthesis and structural elaboration of amine-containing targets. Moreover, this study demonstrates that concerted proton-coupled electron transfer can enable homolytic activation of common organic functional groups that are energetically inaccessible using

  5. Studies of Hydrogen Bonding Between N, N-Dimethylacetamide and Primary Alcohols

    Directory of Open Access Journals (Sweden)

    M. S. Manjunath

    2009-01-01

    Full Text Available Hydrogen bonding between N, N-dimethylacetamide (DMA and alcohols has been studied in carbon tetrachloride solution by an X-band Microwave bench at 936GHz. The dielectric relaxation time (τ of the binary system are obtained by both Higasi's method and Gopalakrishna method. The most likely association complex between alcohol and DMA is 1:1 stoichiometric complex through the hydroxyl group of the alcohol and the carbonyl group of amide. The results show that the interaction between alcohols and amides is 1:1 complex through the free hydroxyl group of the alcohol and the carbonyl group of amide and the alkyl chain-length of both the alcohols and amide plays an important role in the determination of the strength of hydrogen bond (O-H: C=O formed and suggests that the proton donating ability of alcohols is in the order: 1-propanol < 1-butanol < 1-pentanol and the accepting ability of DMA.

  6. Stable isotopes

    International Nuclear Information System (INIS)

    Evans, D.K.

    1986-01-01

    Seventy-five percent of the world's stable isotope supply comes from one producer, Oak Ridge Nuclear Laboratory (ORNL) in the US. Canadian concern is that foreign needs will be met only after domestic needs, thus creating a shortage of stable isotopes in Canada. This article describes the present situation in Canada (availability and cost) of stable isotopes, the isotope enrichment techniques, and related research programs at Chalk River Nuclear Laboratories (CRNL)

  7. Nickel-Catalyzed Diaryl Ketone Synthesis by N-C Cleavage: Direct Negishi Cross-Coupling of Primary Amides by Site-Selective N,N-Di-Boc Activation.

    Science.gov (United States)

    Shi, Shicheng; Szostak, Michal

    2016-11-18

    A general Negishi acylation of primary amides enabled by a combination of site-selective N,N-di-Boc activation and nickel catalysis is reported for the first time. The reaction is promoted by a bench-stable, inexpensive Ni catalyst. The reaction shows excellent functional group compatibility, affording functionalized diaryl ketones by selective N-C cleavage. Most notably, this protocol represents the first amide cross-coupling by direct metal insertion of simple and readily available primary amides. The overall strategy by N,N-di-Boc activation/metal insertion is suitable for a broad range of coupling protocols via acylmetals. Mechanistic experiments suggest high reactivity of N,N-di-Boc activated 1° amides in direct amide C-N cross-couplings.

  8. Solvent Effects on Oxygen-17 Chemical Shifts in Amides. Quantitative Linear Solvation Shift Relationships

    Science.gov (United States)

    Díez, Ernesto; Fabián, Jesús San; Gerothanassis, Ioannis P.; Esteban, Angel L.; Abboud, José-Luis M.; Contreras, Ruben H.; de Kowalewski, Dora G.

    1997-01-01

    A multiple-linear-regression analysis (MLRA) has been carried out using the Kamlet-Abboud-Taft (KAT) solvatochromic parameters in order to elucidate and quantify the solvent effects on the17O chemical shifts ofN-methylformamide (NMF),N,N-dimethylformamide (DMF),N-methylacetamide (NMA), andN,N-dimethylacetamide (DMA). The chemical shifts of the four molecules show the same dependence (in ppm) on the solvent polarity-polarizability, i.e., -22π*. The influence of the solvent hydrogen-bond-donor (HBD) acidities is slightly larger for the acetamides NMA and DMA, i.e., -48α, than for the formamides NMF and DMF, i.e., -42α. The influence of the solvent hydrogen-bond-acceptor (HBA) basicities is negligible for the nonprotic molecules DMF and DMA but significant for the protic molecules NMF and NMA, i.e., -9β. The effect of substituting the N-H hydrogen by a methyl group amounts to -5.9 ppm in NMF and 5.4 ppm in NMA. The effect of substituting the O=C-H hydrogen amounts to 5.5 ppm in NMF and 16.8 ppm in DMF. The model of specific hydration sites of amides by I. P. Gerothanassis and C. Vakka [J. Org. Chem.59,2341 (1994)] is settled in a more quantitative basis and the model by M. I. Burgar, T. E. St. Amour, and D. Fiat [J. Phys. Chem.85,502 (1981)] is critically evaluated.17O hydration shifts have been calculated for formamide (FOR) by the ab initio LORG method at the 6-31G* level. For a formamide surrounded by the four in-plane molecules of water in the first hydration shell, the calculated17O shift change due to the four hydrogen bonds, -83.2 ppm, is smaller than the empirical hydration shift, -100 ppm. The17O shift change from each out-of-plane water molecule hydrogen-bonded to the amide oxygen is -18.0 ppm. These LORG results support the conclusion that no more than four water molecules are hydrogen-bonded to the amide oxygen in formamide.

  9. Preparation of different amides via Ritter reaction from alcohols and ...

    Indian Academy of Sciences (India)

    Ritter reaction; SBNPSA; alcohol; nitrile; amide. 1. Introduction. The conversion of nitriles to amides by reaction with alcohols or alkenes in the presence of sulphuric acid is named Ritter reaction. Acidification of the appro- priate alcohol or alkene generates a carbenium ion which reacts with nitrile. While the successful ...

  10. synthesis and characterization of new optically active poly(amide ...

    African Journals Online (AJOL)

    Preferred Customer

    such as poly(amide-imide)s and poly(acrylat-imide)s, have been developed [3-7]. Poly(amide- imide)s (PAIs) are well known as a class of polymers with good compromise between thermal stability and processability. There is a growing interest in PAIs for a variety of applications as they retain good mechanical properties at ...

  11. Systematic replacement of amides by 1,4-disubstituted[1,2,3]triazoles in Leu-enkephalin and the impact on the delta opioid receptor activity

    Science.gov (United States)

    Proteau-Gagné, Arnaud; Rochon, Kristina; Roy, Mélissa; Albert, Pierre-Julien; Guérin, Brigitte; Gendron, Louis; Dory, Yves L.

    2013-01-01

    Using Cu(I)-catalyzed azide-alkyne cycloaddition in a mixed classical organic phase and solid phase peptide synthesis approach, we synthesized four analogs of Leu-enkephalin to systematically replace amides by 1,4-disubstituted[1,2,3]triazoles. The peptidomimetics obtained were characterized by competitive binding, contractility assays and ERK1/2 phosphorylation. The present study reveals that the analog bearing a triazole between Phe and Leu retains some potency, more than all the others, suggesting that the hydrogen bond acceptor capacity of the last amide of Leu-enkephalin is essential for the biological activity of the peptide. PMID:23988352

  12. Syntheses and structures of four new mixed-amide phosphoric triamides.

    Science.gov (United States)

    Keikha, Mojtaba; Pourayoubi, Mehrdad; Tarahhomi, Atekeh; van der Lee, Arie

    2016-03-01

    Phosphoric triamides have extensive applications in biochemistry and are also used as O-donor ligands. Four new mixed-amide phosphoric triamide structures, namely rac-N-tert-butyl-N',N''-dicyclohexyl-N''-methylphosphoric triamide, C17H36N3OP, (I), rac-N,N'-dicyclohexyl-N'-methyl-N''-(p-tolyl)phosphoric triamide, C20H34N3OP, (II), N,N',N''-tricyclohexyl-N''-methylphosphoric triamide, C19H38N3OP, (III), and 2-[cyclohexyl(methyl)amino]-5,5-dimethyl-1,3,2λ(5)-diazaphosphinan-2-one, C12H26N3OP, (IV), have been synthesized and studied by X-ray diffraction and spectroscopic methods. Structures (I) and (II) are the first diffraction studies of acyclic racemic mixed-amide phosphoric triamides. The P-N bonds resulting from the different substituent -N(CH3)(C6H11), (C6H11)NH-, 4-CH3-C6H4NH-, (tert-C4H9)NH- and -NHCH2C(CH3)2CH2NH- groups are compared, along with the different molecular volumes and electron-donor strengths. In all four structures, the molecules form extended chains through N-H...O hydrogen bonds.

  13. Biodegradable gadolinium-chelated cationic poly(urethane amide) copolymers for gene transfection and magnetic resonance imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Xiaolong [Department of Radiology, Tongji Hospital, Tongji University School of Medicine, Shanghai 200065 (China); Wang, Gangmin [Department of Urology, Huashan Hospital, Fudan University, Shanghai 200040 (China); Shi, Ting [The Institute for Translational Nanomedicine, Shanghai East Hospital, Institute for Biomedical Engineering and Nanoscience, Tongji University School of Medicine, Shanghai 200092 (China); Shao, Zhihong [Department of Radiology, Tongji Hospital, Tongji University School of Medicine, Shanghai 200065 (China); Zhao, Peng; Shi, Donglu [The Institute for Translational Nanomedicine, Shanghai East Hospital, Institute for Biomedical Engineering and Nanoscience, Tongji University School of Medicine, Shanghai 200092 (China); Ren, Jie [Institute of Nano and Biopolymeric Materials, School of Materials Science and Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804 (China); Lin, Chao, E-mail: chaolin@tongji.edu.cn [The Institute for Translational Nanomedicine, Shanghai East Hospital, Institute for Biomedical Engineering and Nanoscience, Tongji University School of Medicine, Shanghai 200092 (China); Wang, Peijun, E-mail: tjpjwang@sina.com [Department of Radiology, Tongji Hospital, Tongji University School of Medicine, Shanghai 200065 (China)

    2016-08-01

    Theranostic nano-polyplexes containing gene and imaging agents hold a great promise for tumor diagnosis and therapy. In this work, we develop a group of new gadolinium (Gd)-chelated cationic poly(urethane amide)s for gene delivery and T{sub 1}-weighted magnetic resonance (MR) imaging. Cationic poly(urethane amide)s (denoted as CPUAs) having multiple disulfide bonds, urethane and amide linkages were synthesized by stepwise polycondensation reaction between 1,4-bis(3-aminopropyl)piperazine and a mixture of di(4-nitrophenyl)-2, 2′-dithiodiethanocarbonate (DTDE-PNC) and diethylenetriaminepentaacetic acid (DTPA) dianhydride at varied molar ratios. Then, Gd-chelated CPUAs (denoted as GdCPUAs) were produced by chelating Gd(III) ions with DTPA residues of CPUAs. These GdCPUAs could condense gene into nanosized and positively-charged polyplexes in a physiological condition and, however, liberated gene in an intracellular reductive environment. In vitro transfection experiments revealed that the GdCPUA at a DTDE-PNC/DTPA residue molar ratio of 85/15 induced the highest transfection efficiency in different cancer cells. This efficiency was higher than that yielded with 25 kDa branched polyethylenimine as a positive control. GdCPUAs and their polyplexes exhibited low cytotoxicity when an optimal transfection activity was detected. Moreover, GdCPUAs may serve as contrast agents for T{sub 1}-weighted magnetic resonance imaging. The results of this work indicate that biodegradable Gd-chelated cationic poly(urethane amide) copolymers have high potential for tumor theranostics. - Highlights: • Novel cationic gadolinium-chelated poly(urethane amide)s (GdCPUAs) are prepared. • GdCPUAs can induce a high transfection efficacy in different cancer cells. • GdCPUAs reveal good cyto-compatibility against cancer cells. • GdCPUAs may be applied as T{sub 1}-contrast agents for magnetic resonance imaging. • GdCPUAs hold high potential for cancer theranostics.

  14. Anion complexation with cyanobenzoyl substituted first and second generation tripodal amide receptors: crystal structure and solution studies.

    Science.gov (United States)

    Hoque, Md Najbul; Gogoi, Abhijit; Das, Gopal

    2015-09-14

    Anion complexation properties of two new tripodal amide receptors have been extensively studied here. Two tripodal receptors have been synthesized from the reaction of cyanobenzoyl acid chloride with two tri-amine building blocks such as (i) tris(2-aminoethyl)amine and (ii) tris(2-(4-aminophenoxy)ethyl)amine, which resulted in the first (L1) and second (L2) generation tripodal amides respectively. A detailed comparison of their coordination behavior with anions is also described by crystallographic and solution state experiments. The crystal structure demonstrates various types of spatial orientations of tripodal arms in two receptors and concomitantly interacts with anions distinctively. Intramolecular H-bonding between amide N–H and CO prevents opening of the receptor cavity in the crystal, which leads to a locked conformation of L1 having C(3v) symmetry and makes amide hydrogen unavailable for the anion which results in side cleft anion binding. However, in L2 we conveniently shift the anion binding sites to a distant position which increases cavity size as well as rules out any intramolecular H-bonding between amide N–H and CO. The crystal structure shows a different orientation of the arms in L2; it adopts a quasi-planar arrangement with C(2v) symmetry. In the crystal structure two arms are pointed in the same direction and while extending the contact the third arm is H-bonded with the apical N-atom through a –CN group, making a pseudo capsular cavity where the anion interacts. Most importantly spatial reorientation of the receptor L2 from a C(2v) symmetry to a folded conformation with a C(3v) symmetry was observed only in the presence of an octahedral SiF6(2-) anion and forms a sandwich type complex. Receptors L1 and L2 are explored for their solution state anion binding abilities. The substantial changes in chemical shifts were observed for the amide (-NH) and aromatic hydrogen (-CH) (especially for F(-)), indicating the role of these hydrogens in

  15. Acute effects of glucagon-like peptide-1, GLP-19-36 amide, and exenatide on mesenteric blood flow, cardiovascular parameters, and biomarkers in healthy volunteers

    DEFF Research Database (Denmark)

    Hansen, Lasse Bremholm; Andersen, Ulrik B; Hornum, Mads

    2017-01-01

    arteries. GLP-1 significantly increased heart rate (two-way ANOVA, injection [P = 0.0162], time [P = 0.0038], and injection × time [P = 0.082]; Tukey post hoc GLP-1 vs. saline and GLP-19-36amide [P stroke volume compared to GLP-19-36 amide...... subcutaneous injections of GLP-1, GLP-19-36 amide (bioactive metabolite), exenatide (stable GLP-1 agonist), or saline on four separate days. Blood flow in mesenteric, celiac, and renal arteries was measured by Doppler ultrasound. Blood pressure, heart rate, cardiac output, and stroke volume were measured...

  16. Naturally occurring antifungal aromatic esters and amides

    International Nuclear Information System (INIS)

    Ali, M.S.; Shahnaz; Tabassum, S.; Ogunwande, I.A.; Pervez, M.K.

    2010-01-01

    During the search of antifungal natural products from terrestrial plants, a new long chained aromatic ester named grandiflorate along with spatazoate from Portulaca grandiflora and N-[2-methoxy-2-(4-methoxyphenyl) ethyl]-trans-cinnamide and aegeline from Solanum erianthum of Nigeria were isolated and tested against six fungal species. The known constituents have not been reported so far from mentioned investigated plants. Structures of the isolated compounds were elucidated with the aid of spectroscopic techniques including two dimensional NMR experiments. Among the compounds, the esters found more potent than amides against Candida albicans and Aspergillus flavus. The new compound grandiflorate gave response against all tested fungal species while aegeline was found to give lowest inhibition during this study. (author)

  17. Formation of carboxy- and amide-terminated alkyl monolayers on silicon(111) investigated by ATR-FTIR, XPS, and X-ray scattering: Construction of photoswitchable surfaces

    DEFF Research Database (Denmark)

    Rück-Braun, Karola; Petersen, Michael Åxman; Michalik, Fabian

    2013-01-01

    -FTIR and XPS studies of the fulgimide samples revealed closely covered amide-terminated SAMs. Reversible photoswitching of the headgroup was read out by applying XPS, ATR-FTIR, and difference absorption spectra in the mid-IR. In XPS, we observed a reversible breathing of the amide/imide C1s and N1s signals......We have prepared high-quality, densely packed, self-assembled monolayers (SAMs) of carboxy-terminated alkyl chains on Si(111). The samples were made by thermal grafting of methyl undec-10-enoate under an inert atmosphere and subsequent cleavage of the ester functionality to disclose the carboxylic...... zigzag-like substitution pattern for the ester- and carboxy-terminated monolayer. Hydrolysis of the remaining H-Si(111) bonds at the surface furnished HO-Si(111) groups according to XPS and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) studies. The amide-terminated alkyl...

  18. A novel thermooxidatively stable poly(ester-imide-benzoxazole)

    Energy Technology Data Exchange (ETDEWEB)

    Sundar, R.A.; Mathias, L.J. [Univ. of Sothern Mississippi, Hattiesburg, MS (United States)

    1993-12-31

    A poly(ester-amide-imide) was synthesized by the low temperature solution polycondensation of 4-amino-5-hydroxy-N,4{prime}-hydroxyphenyl phthalimide with isophthaloyl chloride. Subsequent thermal cyclodehydration of the poly(ester-amide-imide) at 320{degrees}C in vacuum afforded the poly(ester-imide-benzoxazole). This polymer was only soluble in sulfuric acid. FTIR and NMR spectra confirmed structure. The poly(ester-imide-benzoxazole) had no detectable thermal transitions up to 500{degrees}C in nitrogen, and was reasonably stable in air and nitrogen, with weight retentions of 95% at 500{degrees}C.

  19. Conformational properties of oxazole-amino acids: effect of the intramolecular N-H···N hydrogen bond.

    Science.gov (United States)

    Siodłak, Dawid; Staś, Monika; Broda, Małgorzata A; Bujak, Maciej; Lis, Tadeusz

    2014-03-06

    Oxazole ring occurs in numerous natural peptides, but conformational properties of the amino acid residue containing the oxazole ring in place of the C-terminal amide bond are poorly recognized. A series of model compounds constituted by the oxazole-amino acids occurring in nature, that is, oxazole-alanine (L-Ala-Ozl), oxazole-dehydroalanine (ΔAla-Ozl), and oxazole-dehydrobutyrine ((Z)-ΔAbu-Ozl), was investigated using theoretical calculations supported by FTIR and NMR spectra and single-crystal X-ray diffraction. It was found that the main feature of the studied oxazole-amino acids is the stable conformation β2 with the torsion angles φ and ψ of -150°, -10° for L-Ala-Ozl, -180°, 0° for ΔAla-Ozl, and -120°, 0° for (Z)-ΔAbu-Ozl, respectively. The conformation β2 is stabilized by the intramolecular N-H···N hydrogen bond and predominates in the low polar environment. In the case of the oxazole-dehydroamino acids, the π-electron conjugation that is spread on the oxazole ring and C(α)═C(β) double bond is an additional stabilizing interaction. The tendency to adopt the conformation β2 clearly decreases with increasing the polarity of environment, but still the oxazole-dehydroamino acids are considered to be more rigid and resistant to conformational changes.

  20. Some Brief Notes on Theoretical and Experimental Investigations of Intramolecular Hydrogen Bonding

    Directory of Open Access Journals (Sweden)

    Lucjan Sobczyk

    2016-12-01

    Full Text Available A review of selected literature data related to intramolecular hydrogen bonding in ortho-hydroxyaryl Schiff bases, ortho-hydroxyaryl ketones, ortho-hydroxyaryl amides, proton sponges and ortho-hydroxyaryl Mannich bases is presented. The paper reports on the application of experimental spectroscopic measurements (IR and NMR and quantum-mechanical calculations for investigations of the proton transfer processes, the potential energy curves, tautomeric equilibrium, aromaticity etc. Finally, the equilibrium between the intra- and inter-molecular hydrogen bonds in amides is discussed.

  1. An efficient synthetic protocol for amide derivatives of Boc-2-aminoisobutyrate.

    Science.gov (United States)

    Jo, Minmi; Won, Sun-Woo; Lee, Dong Guk; Jung, Jae-Kyung; Kim, Sunhong; Kwak, Young-Shin

    2018-03-01

    Aminoisobutyric acid (AIB) is an important building block widely incorporated by medicinal chemists in molecular design. Owing to the steric challenge, elaborating AIB's carboxylic acid using conventional amidation protocols is often problematic. We discovered that an amidation protocol utilizing methyl Boc-aminoisobutyrate and magnesium amidates of various reactivities produces the corresponding amide derivatives in good to excellent yields.

  2. Dielectric behaviour of some amides and formamides dissolved in ...

    Indian Academy of Sciences (India)

    2011-08-02

    frequency relative per- mittivity ε∞ij and static experimental parameter Xij of different amides dissolved in nonpolar solvents at 35. ◦. C. System. Weight. Static relative. High-. Static fraction permittivity frequency relative.

  3. MICROBIAL DEGRADATION OF SEVEN AMIDES BY SUSPENDED BACTERIAL POPULATIONS

    Science.gov (United States)

    Microbial transformation rate constants were determined for seven amides in natural pond water. A second-order mathematical rate expression served as the model for describing the microbial transformation. Also investigated was the relationship between the infrared spectra and the...

  4. Silver-catalyzed synthesis of amides from amines and aldehydes

    Science.gov (United States)

    Madix, Robert J; Zhou, Ling; Xu, Bingjun; Friend, Cynthia M; Freyschlag, Cassandra G

    2014-11-18

    The invention provides a method for producing amides via the reaction of aldehydes and amines with oxygen adsorbed on a metallic silver or silver alloy catalyst. An exemplary reaction is shown in Scheme 1: (I), (II), (III). ##STR00001##

  5. Enzymatically and reductively degradable α-amino acid-based poly(ester amide)s: synthesis, cell compatibility, and intracellular anticancer drug delivery.

    Science.gov (United States)

    Sun, Huanli; Cheng, Ru; Deng, Chao; Meng, Fenghua; Dias, Aylvin A; Hendriks, Marc; Feijen, Jan; Zhong, Zhiyuan

    2015-02-09

    A novel and versatile family of enzymatically and reductively degradable α-amino acid-based poly(ester amide)s (SS-PEAs) were developed from solution polycondensation of disulfide-containing di-p-toluenesulfonic acid salts of bis-l-phenylalanine diesters (SS-Phe-2TsOH) with di-p-nitrophenyl adipate (NA) in N,N-dimethylformamide (DMF). SS-PEAs with Mn ranging from 16.6 to 23.6 kg/mol were obtained, depending on NA/SS-Phe-2TsOH molar ratios. The chemical structures of SS-PEAs were confirmed by (1)H NMR and FTIR spectra. Thermal analyses showed that the obtained SS-PEAs were amorphous with a glass transition temperature (Tg) in the range of 35.2-39.5 °C. The in vitro degradation studies of SS-PEA films revealed that SS-PEAs underwent surface erosion in the presence of 0.1 mg/mL α-chymotrypsin and bulk degradation under a reductive environment containing 10 mM dithiothreitol (DTT). The preliminary cell culture studies displayed that SS-PEA films could well support adhesion and proliferation of L929 fibroblast cells, indicating that SS-PEAs have excellent cell compatibility. The nanoparticles prepared from SS-PEA with PVA as a surfactant had an average size of 167 nm in phosphate buffer (PB, 10 mM, pH 7.4). SS-PEA nanoparticles while stable under physiological environment undergo rapid disintegration under an enzymatic or reductive condition. The in vitro drug release studies showed that DOX release was accelerated in the presence of 0.1 mg/mL α-chymotrypsin or 10 mM DTT. Confocal microscopy observation displayed that SS-PEA nanoparticles effectively transported DOX into both drug-sensitive and -resistant MCF-7 cells. MTT assays revealed that DOX-loaded SS-PEA nanoparticles had a high antitumor activity approaching that of free DOX in drug-sensitive MCF-7 cells, while more than 10 times higher than free DOX in drug-resistant MCF-7/ADR cells. These enzymatically and reductively degradable α-amino acid-based poly(ester amide)s have provided an appealing platform for

  6. Stable single-frequency output at 2.01 microm from a diode-pumped monolithic double diffusion-bonded Tm:YAG nonplanar ring oscillator at room temperature.

    Science.gov (United States)

    Gao, Chunqing; Gao, Mingwei; Zhang, Yunshan; Lin, Zhifeng; Zhu, Lingni

    2009-10-01

    We demonstrate a monolithic double diffusion-bonded monolithic Tm:YAG nonplanar ring laser pumped by a fiber-coupled laser diode. Up to 867 mW single-frequency output at 2.01 microm was obtained from the Tm:YAG system at room temperature, with a slope efficiency and an optical-optical efficiency of 31.6% and 19.2%. The power stability of the single frequency laser was 0.32% within 30 min.

  7. Phase space investigation of the lithium amide halides

    Energy Technology Data Exchange (ETDEWEB)

    Davies, Rosalind A. [Hydrogen Storage Chemistry Group, School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Hydrogen and Fuel Cell Group, School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT (United Kingdom); Hewett, David R.; Korkiakoski, Emma [Hydrogen Storage Chemistry Group, School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Thompson, Stephen P. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0QX (United Kingdom); Anderson, Paul A., E-mail: p.a.anderson@bham.ac.uk [Hydrogen Storage Chemistry Group, School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom)

    2015-10-05

    Highlights: • The lower limits of halide incorporation in lithium amide have been investigated. • The only amide iodide stoichiometry observed was Li{sub 3}(NH{sub 2}){sub 2}I. • Solid solutions were observed in both the amide chloride and amide bromide systems. • A 46% reduction in chloride content resulted in a new phase: Li{sub 7}(NH{sub 2}){sub 6}Cl. • New low-chloride phase maintained improved H{sub 2} desorption properties of Li{sub 4}(NH{sub 2}){sub 3}Cl. - Abstract: An investigation has been carried out into the lower limits of halide incorporation in lithium amide (LiNH{sub 2}). It was found that the lithium amide iodide Li{sub 3}(NH{sub 2}){sub 2}I was unable to accommodate any variation in stoichiometry. In contrast, some variation in stoichiometry was accommodated in Li{sub 7}(NH{sub 2}){sub 6}Br, as shown by a decrease in unit cell volume when the bromide content was reduced. The amide chloride Li{sub 4}(NH{sub 2}){sub 3}Cl was found to adopt either a rhombohedral or a cubic structure depending on the reaction conditions. Reduction in chloride content generally resulted in a mixture of phases, but a new rhombohedral phase with the stoichiometry Li{sub 7}(NH{sub 2}){sub 6}Cl was observed. In comparison to LiNH{sub 2}, this new low-chloride phase exhibited similar improved hydrogen desorption properties as Li{sub 4}(NH{sub 2}){sub 3}Cl but with a much reduced weight penalty through addition of chloride. Attempts to dope lithium amide with fluoride ions have so far proved unsuccessful.

  8. Total synthesis of resorcinol amide Hsp90 inhibitor AT13387.

    Science.gov (United States)

    Patel, Bhavesh H; Barrett, Anthony G M

    2012-12-21

    The synthesis of C-5-substituted resorcinol amide AT13387, a known Hsp90 inhibitor currently in clinical trials, is reported without the use of phenolic protection in an overall yield of 13.4%. Biomimetic aromatization and Suzuki-Miyaura cross coupling approach were employed to synthesize the resorcinol and iso-indoline units, respectively, which were efficiently coupled using Grignard-mediated amidation.

  9. A new phenylethyl alkyl amide from the Ambrostoma quadriimpressum Motschulsky

    Directory of Open Access Journals (Sweden)

    Guolei Zhao

    2011-09-01

    Full Text Available A new phenylethyl alkyl amide, (10R-10-hydroxy-N-phenethyloctadecanamide (1, was isolated from the beetle Ambrostoma quadriimpressum Motschulsky. The structure of the amide was determined by NMR and MS. The absolute configuration of compound 1 was confirmed by an asymmetric total synthesis, which was started from L-glutamic acid. The construction of the aliphatic chain was accomplished by the selective protection of the hydroxy groups and two-time implementation of the Wittig olefination reaction.

  10. Synthesis and biological activity of pyridazine amides, hydrazones and hydrazides.

    Science.gov (United States)

    Buysse, Ann M; Yap, Maurice Ch; Hunter, Ricky; Babcock, Jonathan; Huang, Xinpei

    2017-04-01

    Optimization studies on compounds initially designed to be herbicides led to the discovery of a series of [6-(3-pyridyl)pyridazin-3-yl]amides exhibiting aphicidal properties. Systematic modifications of the amide moiety as well as the pyridine and pyridazine rings were carried out to determine if these changes could improve insecticidal potency. Structure-activity relationship (SAR) studies showed that changes to the pyridine and pyridazine rings generally resulted in a significant loss of insecticidal potency against green peach aphids [Myzus persicae (Sulzer)] and cotton aphids [(Aphis gossypii (Glover)]. However, replacement of the amide moiety with hydrazines, hydrazones, or hydrazides appeared to be tolerated, with small aliphatic substituents being especially potent. A series of aphicidal [6-(3-pyridyl)pyridazin-3-yl]amides were discovered as a result of random screening of compounds that were intially investigated as herbicides. Follow-up studies of the structure-activity relationship of these [6-(3-pyridyl)pyridazin-3-yl]amides showed that biosteric replacement of the amide moiety was widely tolerated suggesting that further opportunities for exploitation may exist for this new area of insecticidal chemistry. Insecticidal efficacy from the original hit, compound 1, to the efficacy of compound 14 produced greater than 10-fold potency improvement against Aphis gossypii and greater than 14-fold potency improvement against Myzus persicae. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  11. Conformational properties of amphotericin B amide derivatives - impact on selective toxicity

    Science.gov (United States)

    Resat, Haluk; Sungur, F. Aylin; Baginski, Maciej; Borowski, Edward; Aviyente, Viktorya

    2000-10-01

    Even though it is highly toxic, Amphotericin B (AmB), an amphipathic polyene macrolide antibiotic, is used in the treatment of severe systemic fungal infections as a life-saving drug. To examine the influence of conformational factors on selective toxicity of these compounds, we have investigated the conformational properties of five AmB amide derivatives. It was found that the extended conformation with torsional angles (φ,ψ)=(290°,180° ) is a common minimum of the potential energy surfaces (PES) of unsubstituted AmB and its amide derivatives. The extended conformation of the studied compounds allows for the formation of an intermolecular hydrogen bond network between adjacent antibiotic molecules in the open channel configuration. Therefore, the extended conformation is expected to be the dominant conformer in an open AmB (or its amide derivatives) membrane channel. The derivative compounds for calculations were chosen according to their selective toxicity compared to AmB and they had a wide range of selective toxicity. Except for two AmB derivatives, the PES maps of the derivatives reveal that the molecules can coexist in more than one conformer. Taking into account the cumulative conclusions drawn from the earlier MD simulation studies of AmB membrane channel, the results of the potential energy surface maps, and the physical considerations of the molecular structures, we hypothesize a new model of structure-selective toxicity of AmB derivatives. In this proposed model the presence of the extended conformation as the only well defined global conformer for AmB derivatives is taken as the indicator of their higher selective toxicity. This model successfully explains our results. To further test our model, we also investigated an AmB derivative whose selective toxicity has not been experimentally measured before. Our prediction for the selective toxicity of this compound can be tested in experiments to validate or invalidate the proposed model.

  12. Amide proton solvent protection in amylin fibrils probed by quenched hydrogen exchange NMR.

    Directory of Open Access Journals (Sweden)

    Andrei T Alexandrescu

    Full Text Available Amylin is an endocrine hormone that accumulates in amyloid plaques in patients with advanced type 2 diabetes. The amyloid plaques have been implicated in the destruction of pancreatic β-cells, which synthesize amylin and insulin. To better characterize the secondary structure of amylin in amyloid fibrils we assigned the NMR spectrum of the unfolded state in 95% DMSO and used a quenched hydrogen-deuterium exchange technique to look at amide proton solvent protection in the fibrils. In this technique, partially exchanged fibrils are dissolved in 95% DMSO and information about amide proton occupancy in the fibrils is determined from DMSO-denatured monomers. Hydrogen exchange lifetimes at pH 7.6 and 37°C vary between ∼5 h for the unstructured N-terminus to 600 h for amide protons in the two β-strands that form inter-molecular hydrogen bonds between amylin monomers along the length of the fibril. Based on the protection data we conclude that residues A8-H18 and I26-Y37 comprise the two β-strands in amylin fibrils. There is variation in protection within the β-strands, particularly for strand β1 where only residues F15-H18 are strongly protected. Differences in protection appear to be due to restrictions on backbone dynamics imposed by the packing of two-layers of C2-symmetry-related β-hairpins in the protofilament structure, with strand β1 positioned on the surface and β2 in the interior.

  13. Stable particles

    International Nuclear Information System (INIS)

    Samios, N.P.

    1994-01-01

    I have been asked to review the subject of stable particles, essentially the particles that eventually comprised the meson and baryon octets, with a few more additions - with an emphasis on the contributions made by experiments utilizing the bubble chamber technique. In this activity, much work had been done by the photographic emulsion technique and cloud chambers - exposed to cosmic rays as well as accelerator based beams. In fact, many if not most of the stable particles were found by these latter two techniques, however, the foree of the bubble chamber (coupled with the newer and more powerful accelerators) was to verify, and reinforce with large statistics, the existence of these states, to find some of the more difficult ones, mainly neutrals and further to elucidate their properties, i.e., spin, parity, lifetimes, decay parameters, etc. (orig.)

  14. Stable particles

    International Nuclear Information System (INIS)

    Samios, N.P.

    1993-01-01

    I have been asked to review the subject of stable particles, essentially the particles that eventually comprised the meson and baryon octets. with a few more additions -- with an emphasis on the contributions made by experiments utilizing the bubble chamber technique. In this activity, much work had been done by the photographic emulsion technique and cloud chambers-exposed to cosmic rays as well as accelerator based beams. In fact, many if not most of the stable particles were found by these latter two techniques, however, the forte of the bubble chamber (coupled with the newer and more powerful accelerators) was to verify, and reinforce with large statistics, the existence of these states, to find some of the more difficult ones, mainly neutrals and further to elucidate their properties, i.e., spin, parity, lifetimes, decay parameters, etc

  15. Anti-Neoplastic Cytotoxicity of Gemcitabine-(C4-amide)-[anti-EGFR] in Dual-combination with Epirubicin-(C3-amide)-[anti-HER2/neu] against Chemotherapeutic-Resistant Mammary Adenocarcinoma (SKBr-3) and the Complementary Effect of Mebendazole

    Science.gov (United States)

    Coyne, CP; Jones, Toni; Bear, Ryan

    2015-01-01

    Aims Delineate the feasibility of simultaneous, dual selective “targeted” chemotherapeutic delivery and determine if this molecular strategy can promote higher levels anti-neoplastic cytotoxicity than if only one covalent immunochemotherapeutic is selectively “targeted” for delivery at a single membrane associated receptor over-expressed by chemotherapeutic-resistant mammary adenocarcinoma. Methodology Gemcitabine and epirubicin were covalently bond to anti-EGFR and anti-HER2/neu utilizing a rapid multi-phase synthetic organic chemistry reaction scheme. Determination that 96% or greater gemcitabine or epirubicin content was covalently bond to immunoglobulin fractions following size separation by micro-scale column chromatography was established by methanol precipitation analysis. Residual binding-avidity of gemcitabine-(C4-amide)-[anti-EG-FR] applied in dual-combination with epirubicin-(C3-amide)-[anti-HER2/neu] was determined by cell-ELIZA utilizing chemotherapeutic-resistant mammary adenocarcinoma (SKBr-3) populations. Lack of fragmentation or polymerization was validated by SDS-PAGE/immunodetection/chemiluminescent autoradiography. Anti-neoplastic cytotoxic potency was determined by vitality stain analysis of chemotherapeutic-resistant mammary adenocarcinoma (SKBr-3) monolayers known to uniquely over-express EGFR (2 × 105/cell) and HER2/neu (1 × 106/cell) receptor complexes. The covalent immunochemotherapeutics gemcitabine-(C4-amide)-[anti-EGFR] and epirubicin-(C3-amide)-[anti-HER2/neu] were applied simultaneously in dual-combination to determine their capacity to collectively evoke elevated levels of anti-neoplastic cytotoxicity. Lastly, the tubulin/microtubule inhibitor mebendazole evaluated to determine if it’s potential to complemented the anti-neoplastic cytotoxic properties of gemcitabine-(C4-amide)-[anti-EGFR] in dual-combination with epirubicin-(C3-amide)-[anti-HER2/neu]. Results Dual-combination of gemcitabine-(C4-amide)-[anti-EGFR] with

  16. Roles of Low Molecular Weight Amide on Crystallization Behavior of Poly (L-lactic acid)

    Science.gov (United States)

    Dong, Xia; Xing, Qian; Zhang, Xiuqin; Wang, Dujin

    2012-02-01

    Organic nucleating agents play an important role in enhancing the crystallization rate of polymers. The aim of this study is to investigate the effect of low molecular weight aliphatic amides on the crystallization behavior and mechanism of poly (L-lactic acid) (PLLA). The crystallization rate of PLLA during non-isothermal crystallization and isothermal crystallization has been significantly improved with the addition of N, N'-ethylenebis (12-hydroxystearamide) (EBH) and/or N, N'-ethylenebisstearamide (EBSA), and EBH exhibits stronger nucleating ability. Time-resolved FTIR spectra illustrate the chain conformational changes and the crystallization kinetics during isothermal crystallization of PLLA mixtures and pure PLLA, especially in the early stages. The formation of interchain conformational-ordered structure and intrachain 103 helix structure for amide-doped PLLA precedes that of pure PLLA, suggesting a stimulatory nucleating effect of EBH and EBSA. In the case of PLLA/EBH, the interchain interactions of -(COC+CH3) and -CH3 groups are faster than the -(CH3+CC) intrachain interactions, while the interchain interactions and the intrachain 103 helix formation are nearly synchronous for PLLA/EBSA, indicating that EBH has an improved effect on the nucleating ability and crystallization kinetics of PLLA, compared to EBSA. The possible mechanism has been discussed, which may be attributed to the hydrogen bond interaction between hydroxyl groups in EBH and the carbonyl groups in PLLA.

  17. Enhanced Cellular Uptake and Pharmacokinetic Characteristics of Doxorubicin-Valine Amide Prodrug

    Directory of Open Access Journals (Sweden)

    Yohan Park

    2016-09-01

    Full Text Available In this study, we synthesized the valine (Val-conjugated amide prodrug of doxorubicin (DOX by the formation of amide bonds between DOX and Val. The synthesis of the DOX-Val prodrug was identified by a proton nuclear magnetic resonance (1H-NMR assay. In the MCF-7 cells (human breast adenocarcinoma cell; amino acid transporter–positive cell, the cellular accumulation efficiency of DOX-Val was higher than that of DOX according to the flow cytometry analysis data. Using confocal laser scanning microscopy (CLSM imaging, it was confirmed that DOX-Val as well as DOX was mainly distributed in the nucleus of cancer cells. DOX-Val was intravenously administered to rats at a dose of 4 mg/kg, and the plasma concentrations of DOX-Val (prodrug and DOX (formed metabolite were quantitatively determined. Based on the systemic exposure (represented as area under the curve (AUC values of DOX-Val (prodrug and DOX (formed metabolite, approximately half of DOX-Val seemed to be metabolized into DOX. However, it is expected that the remaining DOX-Val may exert improved cellular uptake efficiency in cancer cells after its delivery to the cancer region.

  18. Cinnamic acid amides from Tribulus terrestris displaying uncompetitive α-glucosidase inhibition.

    Science.gov (United States)

    Song, Yeong Hun; Kim, Dae Wook; Curtis-Long, Marcus J; Park, Chanin; Son, Minky; Kim, Jeong Yoon; Yuk, Heung Joo; Lee, Keun Woo; Park, Ki Hun

    2016-05-23

    The α-glucosidase inhibitory potential of Tribulus terrestris extracts has been reported but as yet the active ingredients are unknown. This study attempted to isolate the responsible metabolites and elucidate their inhibition mechanism of α-glucosidase. By fractionating T. terristris extracts, three cinnamic acid amide derivatives (1-3) were ascertained to be active components against α-glucosidase. The lead structure, N-trans-coumaroyltyramine 1, showed significant inhibition of α-glucosidase (IC50 = 0.42 μM). Moreover, all active compounds displayed uncompetitive inhibition mechanisms that have rarely been reported for α-glucosidase inhibitors. This kinetic behavior was fully demonstrated by showing a decrease of both Km and Vmax, and Kik/Kiv ratio ranging between 1.029 and 1.053. We progressed to study how chemical modifications to the lead structure 1 may impact inhibition. An α, β-unsaturation carbonyl group and hydroxyl group in A-ring of cinnamic acid amide emerged to be critical functionalities for α-glucosidase inhibition. The molecular modeling study revealed that the inhibitory activities are tightly related to π-π interaction as well as hydrogen bond interaction between enzyme and inhibitors. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  19. Diffusion bonding

    International Nuclear Information System (INIS)

    Anderson, R.C.

    1976-01-01

    A method is described for joining beryllium to beryllium by diffusion bonding. At least one surface portion of at least two beryllium pieces is coated with nickel. A coated surface portion is positioned in a contiguous relationship with another surface portion and subjected to an environment having an atmosphere at a pressure lower than ambient pressure. A force is applied on the beryllium pieces for causing the contiguous surface portions to abut against each other. The contiguous surface portions are heated to a maximum temperature less than the melting temperature of the beryllium, and the applied force is decreased while increasing the temperature after attaining a temperature substantially above room temperature. A portion of the applied force is maintained at a temperature corresponding to about maximum temperature for a duration sufficient to effect the diffusion bond between the contiguous surface portions

  20. Ligand-enabled ortho-C-H olefination of phenylacetic amides with unactivated alkenes.

    Science.gov (United States)

    Lu, Ming-Zhu; Chen, Xing-Rong; Xu, Hui; Dai, Hui-Xiong; Yu, Jin-Quan

    2018-02-07

    Although chelation-assisted C-H olefination has been intensely investigated, Pd(ii)-catalyzed C-H olefination reactions are largely restricted to acrylates and styrenes. Here we report a quinoline-derived ligand that enables the Pd(ii)-catalyzed olefination of the C(sp 2 )-H bond with simple aliphatic alkenes using a weakly coordinating monodentate amide auxiliary. Oxygen is used as the terminal oxidant with catalytic copper as the co-oxidant. A variety of functional groups in the aliphatic alkenes are tolerated. Upon hydrogenation, the ortho -alkylated product can be accessed. The utility of this reaction is also demonstrated by the late-stage diversification of drug molecules.

  1. Quantifying the Sigma and Pi interactions between U(V) f orbitals and halide, alkyl, alkoxide, amide and ketimide ligands

    Energy Technology Data Exchange (ETDEWEB)

    University of California, Berkeley; Lukens, Wayne W.; Edelstein, Norman M.; Magnani, Nicola; Hayton, Trevor W.; Fortier, Skye; Seaman, Lani A.

    2013-06-20

    f Orbital bonding in actinide and lanthanide complexes is critical to their behavior in a variety of areas from separations to magnetic properties. Octahedral f1 hexahalide complexes have been extensively used to study f orbital bonding due to their simple electronic structure and extensive spectroscopic characterization. The recent expansion of this family to include alkyl, alkoxide, amide, and ketimide ligands presents the opportunity to extend this study to a wider variety of ligands. To better understand f orbital bonding in these complexes, the existing molecular orbital (MO) model was refined to include the effect of covalency on spin orbit coupling in addition to its effect on orbital angular momentum (orbital reduction). The new MO model as well as the existing MO model and the crystal field (CF) model were applied to the octahedral f1 complexes to determine the covalency and strengths of the ? and ? bonds formed by the f orbitals. When covalency is significant, MO models more precisely determined the strengths of the bonds derived from the f orbitals; however, when covalency was small, the CF model was better than either MO model. The covalency determined using the new MO model is in better agreement with both experiment and theory than that predicted by the existing MO model. The results emphasize the role played by the orbital energy in determining the strength and covalency of bonds formed by the f orbitals.

  2. Stable beams

    CERN Multimedia

    2015-01-01

    Stable beams: two simple words that carry so much meaning at CERN. When LHC page one switched from "squeeze" to "stable beams" at 10.40 a.m. on Wednesday, 3 June, it triggered scenes of jubilation in control rooms around the CERN sites, as the LHC experiments started to record physics data for the first time in 27 months. This is what CERN is here for, and it’s great to be back in business after such a long period of preparation for the next stage in the LHC adventure.   I’ve said it before, but I’ll say it again. This was a great achievement, and testimony to the hard and dedicated work of so many people in the global CERN community. I could start to list the teams that have contributed, but that would be a mistake. Instead, I’d simply like to say that an achievement as impressive as running the LHC – a machine of superlatives in every respect – takes the combined effort and enthusiasm of everyone ...

  3. A simple approach for immobilization of gold nanoparticles on graphene oxide sheets by covalent bonding

    NARCIS (Netherlands)

    Pham, Tuan Anh; Choi, Byung Choon; Lim, Kwon Taek; Jeong, Yeon Tae

    2011-01-01

    Amino - functionalized gold nanoparticles with a diameter of around 5 nm were immobilized onto the surface of graphene oxide sheets (GOS) by covalent bonding through a simple amidation reaction. Pristine graphite was firstly oxidized and exfoliated to obtain GOS, which further were acylated with

  4. Recent Advances in Adhesive Bonding - The Role of Biomolecules, Nanocompounds, and Bonding Strategies in Enhancing Resin Bonding to Dental Substrates.

    Science.gov (United States)

    Münchow, Eliseu A; Bottino, Marco C

    2017-09-01

    To present an overview on the main agents (i.e., biomolecules and nanocompounds) and/or strategies currently available to amplify or stabilize resin-dentin bonding. According to studies retrieved for full text reading (2014-2017), there are currently six major strategies available to overcome resin-dentin bond degradation: (i) use of collagen crosslinking agents, which may form stable covalent bonds with collagen fibrils, thus strengthening the hybrid layer; (ii) use of antioxidants, which may allow further polymerization reactions over time; (iii) use of protease inhibitors, which may inhibit or inactivate metalloproteinases; (iv) modification of the bonding procedure, which may be performed by using the ethanol wet-bonding technique or by applying an additional adhesive (hydrophobic) coating, thereby strengthening the hybrid layer; (v) laser treatment of the substrate prior to bonding, which may cause specific topographic changes in the surface of dental substrates, increasing bonding efficacy; and (vi) reinforcement of the resin matrix with inorganic fillers and/or remineralizing agents, which may positively enhance physico-mechanical properties of the hybrid layer. With the present review, we contributed to the better understanding of adhesion concepts and mechanisms of resin-dentin bond degradation, showing the current prospects available to solve that problematic. Also, adhesively-bonded restorations may be benefited by the use of some biomolecules, nanocompounds or alternative bonding strategies in order to minimize bond strength degradation.

  5. Radiolabeled biotin amides from triazenyl precursors: synthesis, binding, and in-vivo properties

    International Nuclear Information System (INIS)

    Kortylewicz, Z.P.; Baranowska-Kortylewicz, J.; Adelstein, S.J.; Carmel, A.D.; Kassis, A.I.

    1994-01-01

    The synthesis of N-(4-[ 127/125/123 I]iodobenzyl)biotin amides 4a - 4c performed by the direct decomposition of N-[4-(3',3'-dimethyltriazenyl)benzyl]biotin amide with sodium iodide in the presence of CF 3 COOH is described. Iodinated in this way biotin formed a stable complex with avidin (K d = 2.84 ± 0.45 x 10 -15 M, n = 3.9 ± 0.6) which dissociated in the presence of excess native biotin with a rate constant of 0.034 ± 0.006 hr -1 . Blood clearance studies and the lack of thyroid uptake indicated that this compound was not deiodinated in vivo and behaved in circulation much like native biotin. This aryltriazene precursor method is suitable for labeling with short-lived radiohalides. It can be used to produce no-carrier-added derivatives of biotin for use in biologic studies and assays involving avidin or streptavidin. (author)

  6. Novel composite films based on amidated pectin for cationic dye adsorption.

    Science.gov (United States)

    Nesic, Aleksandra R; Velickovic, Sava J; Antonovic, Dusan G

    2014-04-01

    Pectin, with its tendency to gel in the presence of metal ions has become a widely used material for capturing the metal ions from wastewaters. Its dye-capturing properties have been much less investigated, and this paper is the first to show how films based on amidated pectin can be used for cationic dye adsorption. In the present study amidated pectin/montmorillonite composite films were synthesized by membrane casting, and they are stable in aqueous solution both below and above pectin pKa. FTIR, thermogravimetry and SEM-EDAX have confirmed the presence of montmorillonite in the cast films and the interactions between the two constituents. In order to evaluate the cationic dye adsorption of these films Basic Yellow 28 was used, showing that the films have higher adsorption capacity compared to the others reported in the literature. The results were fitted into Langmuir, Freundlich and Temkin isotherms indicating an exothermic process and setting the optimum amount of montmorillonite in the films to 30% of pectin mass. According to the Langmuir isotherm the maximum adsorption capacity is 571.4 mg/g. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Biosynthesis of amidated joining peptide from pro-adrenocorticotropin-endorphin

    Energy Technology Data Exchange (ETDEWEB)

    Cullen, E.I.; Mains, R.E. (Johns Hopkins Univ. School of Medicine, Baltimore, MD (USA))

    1987-09-01

    Joining peptide is the major alpha-amidated product of pro-ACTH/endorphin (PAE) in AtT-20 corticotropic tumor cells. To study intracellular joining peptide synthesis, affinity purified antibodies directed against gamma-MSH, joining peptide, and ACTH were used to immunoprecipitate extracts from biosynthetically labeled AtT-20 cells. Immunoprecipitates were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by tryptic peptide mapping on HPLC. In steady labeling experiments, radioactivity in amidated joining peptide (JP) increased roughly linearly with time, in the manner of a final product, whereas radioactivity associated with PAE (1-94)NH2 reached a constant value after 2-4 h, indicating that PAE(1-94)NH2 is an intermediate in the biosynthesis of JP. Radioactivity appeared in ACTH(1-39) well before JP, consistent with a cleavage order in which ACTH is cleaved from PAE(1-95) before JP sequences are cleaved from PAE(1-74). This conclusion was supported by tryptic peptide analyses of immunoprecipitates, which indicated that less than 5% of JP-related material is cleaved from PAE(1-74) before being cleaved from ACTH-related sequences. After a pulse label, radioactivity in PAE(1-94)NH2 reached a peak value after 1 h of chase and declined with a half-life of less than 1 h. Amidated JP increased to a constant level after 2 h of chase. Enough radiolabeled PAE(1-94)NH2 was detected to account for about half of the radioactivity found in amidated JP, indicating that about half of JP-related material is first cleaved from PAE(1-95) before being amidated. This result was corroborated using HPLC purification to determine both amidated and glycine-extended forms of JP.

  8. Justice unbound? Globalisation, states and the transformation of the social bond

    OpenAIRE

    Devetak, Richard; Higgott, Richard A.

    1999-01-01

    Conventional accounts of justice suppose the presence of a stable political society, stable identities, and a Westphalian cartography of clear lines of authority--usually a state--where justice can be realised. They also assume a stable social bond. But what if, in an age of globalisation, the territorial boundaries of politics unbundle and a stable social bond deteriorates? How then are we to think about justice? Can there be justice in a world where that bond is constantly being disrupted o...

  9. Amide synthesis by nucleophilic attack of vinyl azides.

    Science.gov (United States)

    Zhang, Feng-Lian; Wang, Yi-Feng; Lonca, Geoffroy Hervé; Zhu, Xu; Chiba, Shunsuke

    2014-04-22

    A method for the synthesis of amide-containing molecules was developed using vinyl azides as an enamine-type nucleophile towards carbon electrophiles, such as imines, aldehydes, and carbocations that were generated from alcohols in the presence of BF3 ⋅OEt2 . After nucleophilic attack of the vinyl azide, a substituent of the resulting iminodiazonium ion intermediate migrates to form a nitrilium ion, which is hydrolyzed to afford the corresponding amide. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Synthesis and bio-physicochemical properties of amide-functionalized N-methylpiperazinium surfactants.

    Science.gov (United States)

    Chauhan, Vinay; Singh, Sukhprit; Mishra, Rachana; Kaur, Gurcharan

    2014-12-15

    Four new amide functionalized N-methylpiperazinium amphiphiles having tetradecyl, hexadecyl alkyl chain lengths and counterions; chloride or bromide have been synthesized and characterized by various spectroscopic techniques. These new surfactants have been investigated in detail for their self-assembling behavior by surface tension, conductivity and fluorescence measurements. The thermodynamic parameters of these surfactants indicate that micellization is exothermic and entropy-driven. The dynamic light scattering (DLS) and transmission electron microscopy (TEM) experiments have been performed to insight the aggregate size of these cationics. Thermal degradation of these new surfactants has also been evaluated by thermal gravimetric analysis (TGA). These new surfactants form stable complexes with DNA as acknowledged by agarose gel electrophoresis, ethidium bromide exclusion and zeta potential measurements. They have also been found to have low cytotoxicity by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay on the C6 glioma cell line. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Spectroscopic, DFT, and XRD Studies of Hydrogen Bonds in N-Unsubstituted 2-Aminobenzamides

    Directory of Open Access Journals (Sweden)

    Malose Jack Mphahlele

    2017-01-01

    Full Text Available The structures of the mono- and the dihalogenated N-unsubstituted 2-aminobenzamides were characterized by means of the spectroscopic (1H-NMR, UV-Vis, FT-IR, and FT-Raman and X-ray crystallographic techniques complemented with a density functional theory (DFT method. The hindered rotation of the C(O–NH2 single bond resulted in non-equivalence of the amide protons and therefore two distinct resonances of different chemical shift values in the 1H-NMR spectra of these compounds were observed. 2-Amino-5-bromobenzamide (ABB as a model confirmed the presence of strong intramolecular hydrogen bonds between oxygen and the amine hydrogen. However, intramolecular hydrogen bonding between the carbonyl oxygen and the amine protons was not observed in the solution phase due to a rapid exchange of these two protons with the solvent and fast rotation of the Ar–NH2 single bond. XRD also revealed the ability of the amide unit of these compounds to function as a hydrogen bond donor and acceptor simultaneously to form strong intermolecular hydrogen bonding between oxygen of one molecule and the NH moiety of the amine or amide group of the other molecule and between the amine nitrogen and the amide hydrogen of different molecules. DFT calculations using the B3LYP/6-311++G(d,p basis set revealed that the conformer (A with oxygen and 2-amine on the same side predominates possibly due to the formation of a six-membered intramolecular ring, which is assisted by hydrogen bonding as observed in the single crystal XRD structure.

  12. Competition of hydrogen bonds and halogen bonds in complexes of hypohalous acids with nitrogenated bases.

    Science.gov (United States)

    Alkorta, Ibon; Blanco, Fernando; Solimannejad, Mohammad; Elguero, Jose

    2008-10-30

    A theoretical study of the complexes formed by hypohalous acids (HOX, X = F, Cl, Br, I, and At) with three nitrogenated bases (NH 3, N 2, and NCH) has been carried out by means of ab initio methods, up to MP2/aug-cc-pVTZ computational method. In general, two minima complexes are found, one with an OH...N hydrogen bond and the other one with a X...N halogen bond. While the first one is more stable for the smallest halogen derivatives, the two complexes present similar stabilities for the iodine case and the halogen-bonded structure is the most stable one for the hypoastatous acid complexes.

  13. Amide-modified poly(butylene terepthalate): thermal stability

    NARCIS (Netherlands)

    van Bennekom, A.C.M.; van Bennekom, A.C.M.; Willemsen, P.A.A.T.; Willemsen, P.A.A.T.; Gaymans, R.J.

    1996-01-01

    The thermal stability of a poly(ester amide) copolymer (PBTA) based on poly(butylene terephthalate) (PBT) and nylon-4,T with the diamide of butanediamine and dimethyl terephthalate (N,N′-bis(p-carbomethoxybenzoyl)butanediamine) and homopolymer PBT was studied. The development of inherent viscosity

  14. Polyurethanes elastomers with amide chain extenders of uniform length

    NARCIS (Netherlands)

    van der Schuur, J.M.; Noordover, B.A.J.; Noordover, Bart; Gaymans, R.J.

    2006-01-01

    Toluene diisocyanate based polyurethanes with amide extenders were synthesized poly(propylene oxide) with a number average molecular weight of 2000 and endcapped with toluene diisocyanate was used as the polyether segment. The chain extenders were based on poly(hexamethylene terephthalamide):

  15. Proximity effect on the general base catalysed hydrolysis of amide ...

    Indian Academy of Sciences (India)

    A constant value of absorbance could not be achieved even after 3 days. However, independent measurements. (by mixing the corresponding amines, salicylic acid and. NaOH, I = 0.5 mol dm. −3) showed that a reaction mix- ture for the complete hydrolysis of the amides (I–IV) to the corresponding amines and salicylate had ...

  16. Method for enhancing amidohydrolase activity of fatty acid amide hydrolase

    Energy Technology Data Exchange (ETDEWEB)

    John, George; Nagarajan, Subbiah; Chapman, Kent; Faure, Lionel; Koulen, Peter

    2017-12-26

    A method for enhancing amidohydrolase activity of Fatty Acid Amide Hydrolase (FAAH) is disclosed. The method comprising administering a phenoxyacyl-ethanolamide that causes the enhanced activity. The enhanced activity can have numerous effects on biological organisms including, for example, enhancing the growth of certain seedlings.

  17. Straightforward uranium-catalyzed dehydration of primary amides to nitriles

    International Nuclear Information System (INIS)

    Enthaler, Stephan

    2011-01-01

    The efficient uranium-catalyzed dehydration of a variety of primary amides, using N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) as a dehydration reagent, to the corresponding nitriles has been investigated. With this catalyst system, extraordinary catalyst activities and selectivities were feasible. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Synthesis, characterization and photo behavior of new poly(amide ...

    African Journals Online (AJOL)

    ... and the interaction between clay and polymeric chains on the properties of nanocomposites films were investigated by using UV-Vis spectroscopy, thermogravimetric analysis (TGA) and water uptake measurements. KEY WORDS: Nanocomposite, Poly(amide-imide), Silicate particle, Polycondensation, Thermal behavior.

  19. Effect of Thiazolidinedione Amide on Insulin Resistance, Creactive ...

    African Journals Online (AJOL)

    Effect of Thiazolidinedione Amide on Insulin Resistance, Creactive Protein and Endothelial Function in Young Women with Polycystic Ovary Syndrome. Wen-Yu Zhong, Hui Peng, Hua Li, Hui Shang, Yong-Qing Wei, Zheng-Hui Fang, Xing-Bo Zhao ...

  20. Proximity effect on the general base catalysed hydrolysis of amide ...

    Indian Academy of Sciences (India)

    the solution state kinetics and equilibria involving poly- dentate phenol–amide ligands and transition metal ions. ∗ ... itored with a Cecil spectrophotometer model CE 7200. (U.K.). The cell block was thermostatted to the .... then acidified with HClO4 to pH 1 and extracted with. CHCl3 at least thrice. All the CHCl3 extracts were.

  1. Synthesis of novel nanostructured chiral poly(amide-imide)s ...

    Indian Academy of Sciences (India)

    Synthesis of novel nanostructured chiral poly(amide-imide)s containing dopamine and natural amino acids. SHADPOUR MALLAKPOURa,b,∗ and AMIN ZADEHNAZARIa. aOrganic Polymer Chemistry Research Laboratory, Department of Chemistry,. bNanotechnology and Advanced Materials Institute, Isfahan University of ...

  2. Citral derived amides as potent bacterial NorA efflux pump inhibitors

    DEFF Research Database (Denmark)

    Thota, Niranjan; Koul, Surrinder; Reddy, Mallepally V

    2008-01-01

    Monoterpene citral and citronellal have been used as starting material for the preparation of 5,9-dimethyl-deca-2,4,8-trienoic acid amides and 9-formyl-5-methyl-deca-2,4,8-trienoic acid amides. The amides on bioevaluation as efflux pump inhibitors (EPIs) against Staphylococcus aureus 1199 and Nor...

  3. Use of triphenyl phosphate as risk mitigant for metal amide hydrogen storage materials

    Energy Technology Data Exchange (ETDEWEB)

    Cortes-Concepcion, Jose A.; Anton, Donald L.

    2016-04-26

    A process in a resulting product of the process in which a hydrogen storage metal amide is modified by a ball milling process using an additive of TPP. The resulting product provides for a hydrogen storage metal amide having a coating that renders the hydrogen storage metal amide resistant to air, ambient moisture, and liquid water while improving useful hydrogen storage and release kinetics.

  4. Understanding Bonds - Denmark

    DEFF Research Database (Denmark)

    Rimmer, Nina Røhr

    2016-01-01

    a specified rate of interest during the life of the bond and to repay the face value of the bond (the principal) when it “matures,” or comes due. Among the types of bonds you can choose from are: Government securities, municipal bonds, corporate bonds, mortgage and asset-backed securities, federal agency...

  5. Physical attributes of some clouds amid a forest ecosystem's trees

    Science.gov (United States)

    DeFelice, Thomas P.

    2002-01-01

    Cloud or fog water collected by forest canopies of any elevation could represent significant sources of required moisture and nutrients for forest ecosystems, human consumption, and as an alternative source of water for agriculture and domestic use. The physical characteristics of fogs and other clouds have been well studied, and this information can be useful to water balance or canopy–cloud interaction model verification and to calibration or training of satellite-borne sensors to recognize atmospheric attributes, such as optical thickness, albedo, and cloud properties. These studies have taken place above-canopy or within canopy clearings and rarely amid the canopy. Simultaneous physical and chemical characteristics of clouds amid and above the trees of a mountain forest, located about 3.3 km southwest of Mt. Mitchell, NC, were collected between 13 and 22 June 1993. This paper summarizes the physical characteristics of the cloud portions amid the trees. The characteristic cloud amid the trees (including cloud and precipitation periods) contained 250 droplet/cm3 with a mean diameter of 9.5 μm and liquid water content (LWC) of 0.11 g m−3. The cloud droplets exhibited a bimodal distribution with modes at about 2 and 8 μm and a mean diameter near 5 μm during precipitation-free periods, whereas the concurrent above-canopy cloud droplets had a unimodal distribution with a mode near 6 μm and a mean diameter of 6 μm. The horizontal cloud water flux is nonlinearly related to the rate of collection onto that surface amid the trees, especially for the Atmospheric Sciences Research Center (ASRC) sampling device, whereas it is linear when the forward scattering spectrometer probe (FSSP) are is used. These findings suggest that statements about the effects clouds have on surfaces they encounter, which are based on above-canopy or canopy-clearing data, can be misleading, if not erroneous.

  6. Carryover potassium amide in cracker at HWP, Hazira - a case study (Paper No. 1.5)

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The liquid ammonia fed to cracker is made available from potassium amide catalyst recovery unit, where catalyst potassium amide is separated by distillation. Extreme care is taken to ensure that ammonia is totally free from potassium. Also the gas used for catalyst heating during start up, should be free of any possible amide contamination and should be pure and dry as moisture is a poison for the catalyst. In order to prevent the recurrence of amide carryover to cracker tubes from start up gas line, certain modifications were carried out besides removal of amide from pipings. Details are discussed. (author)

  7. Solvent Exchange Rates of Side-chain Amide Protons in Proteins

    International Nuclear Information System (INIS)

    Rajagopal, Ponni; Jones, Bryan E.; Klevit, Rachel E.

    1998-01-01

    Solvent exchange rates and temperature coefficients for Asn/Gln side-chain amide protons have been measured in Escherichia coli HPr. The protons of the eight side-chain amide groups (two Asn and six Gln) exhibit varying exchange rates which are slower than some of the fast exchanging backbone amide protons. Differences in exchange rates of the E and Z protons of the same side-chain amide group are obtained by measuring exchange rates at pH values > 8. An NOE between a side-chain amide proton and a bound water molecule was also observed

  8. Adsorption equilibrium of uranium from seawater on chelating resin containing amide oxime group

    International Nuclear Information System (INIS)

    Hori, Takahiro; Saito, Kyoichi; Furusaki, Shintaro; Sugo, Takanobu; Okamoto, Jiro.

    1987-01-01

    Chelating resins containing amide oxime group were synthesized by radiation-induced graft polymerization. The amount of the amide oxime groups was controlled below about 0.1 mol per kg of base polymer. The adsorption equilibrium of uranium from seawater on this resin was investigated. It was suggested that two neighboring amide oxime groups on the grafted chain captured one uranyl ion, and that single amide oxime ligand had little capacity for the adsorption of uranium. The adsorption equilibrium was correlated by a Langmuir-type equation. The content of neighboring amide oxime groups was 0.406 x 10 -3 mol per kg of base polymer, which corresponded to 0.39 % of the total amount of amide oxime groups. The apparent stoichiometric stability constant for the complex of uranyl ion with the neighboring amide oxime groups in seawater was calculated to be 10 -21.7 . (author)

  9. Ligand assisted carbon dioxide activation and hydrogenation using molybdenum and tungsten amides.

    Science.gov (United States)

    Chakraborty, Subrata; Blacque, Olivier; Berke, Heinz

    2015-04-14

    The hepta-coordinated isomeric M(NO)Cl3(PN(H)P) complexes {M = Mo, ; W, , PN(H)P = (iPr2PCH2CH2)2NH, (HN atom of PN(H)P syn and anti to the NO ligand)} and the paramagnetic species M(NO)Cl2(PN(H)P) (M = Mo, ; W, ) could be prepared via a new synthetic pathway. The pseudo trigonal bipyramidal amides M(NO)(CO)(PNP) {M = Mo, ; W, ; [PNP](-) = [(iPr2PCH2CH2)2N](-)} were reacted with CO2 at room temperature with CO2 approaching the M[double bond, length as m-dash]N double bond in the equatorial (CO,NO,N) plane trans to the NO ligand and forming the pseudo-octahedral cyclic carbamates M(NO)(CO)(PNP)(OCO) (M = Mo, ; W = ). DFT calculations revealed that the approach to form the isomer is kinetically determined. The amine hydrides M(NO)H(CO)(PN(H)P) {M = Mo, ; W, }, obtained by H2 addition to , insert CO2 (2 bar) at room temperature into the M-H bond generating isomeric mixtures of the η(1)-formato complexes M(NO)(CO)(PN(H)P)(η(1)-OCHO), (M = Mo, ; M = W, ). Closing the stoichiometric cycles for sodium formate formation the isomeric mixtures were reacted with 1 equiv. of Na[N(SiMe3)2] regenerating . Attempts to turn the stoichiometric formate production into catalytic CO2 hydrogenation using in the presence of various types of sterically congested bases furnished yields of formate salts of up to 4%.

  10. Influences of hyperbranched poly(amide-ester) on the properties of poly(butylene succinate)

    International Nuclear Information System (INIS)

    Run, Mingtao; Wang, Jian; Yao, Meng; Guo, Lijie; Wang, Hai-jun; Ba, Xinwu

    2013-01-01

    The polymer blends of hyperbranched poly(amide-ester) and poly(butylene succinate) (HBP/PBS) were prepared by melt-blending method. The molecular interaction within the blends, phase morphology, crystal morphology, mechanical, rheological and dynamic mechanical properties were investigated by using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), tensile machine, polarized optical microscopy, rotational rheometer and dynamic mechanical analyzer (DMA), respectively. The results suggest that PBS and HBP have a certain compatibility at amorphous state. A certain number of H-bonding was detected between PBS and HBP phases and it influences the material properties. HBP not only serves partially as a nucleating agent for the crystallization of PBS but also plays a role of plasticizer for the rheology of PBS. The glass transition temperatures of the blends slightly decrease with increasing HBP content. The proper amount of HBP (4–6%) has a reinforcement effect on the PBS matrix at glassy state. However, the blend with 10%HBP content has an improved impact strength mainly due to the plasticization effect or H-bonding effect of HBP on PBS matrix. The storage modulus is increased with increasing HBP contents, and the loss modulus is much smaller than the storage modulus in each blend at glassy state. At rubbery state the storage modulus of different samples is independent of HBP content. The complex viscosity of the melt decreases with increasing HBP content; however, the blend with 10%HBP is a special sample because of its abnormal larger complex viscosity at low shear frequencies. In addition, the melt’s elasticity behavior increases slightly with increasing HBP content. - Highlights: ► H-bonding was detected between PBS and HBP phases by FTIR. ► HBP serves partly as a nucleating agent for the crystallization of PBS. ► HBP plays a role of plasticizer for PBS. ► The blend with 10%HBP has abnormal larger complex viscosity

  11. Saturation kinetics in phenolic O-H bond oxidation by a mononuclear Mn(III)-OH complex derived from dioxygen.

    Science.gov (United States)

    Wijeratne, Gayan B; Corzine, Briana; Day, Victor W; Jackson, Timothy A

    2014-07-21

    The mononuclear hydroxomanganese(III) complex, [Mn(III)(OH)(dpaq)](+), which is supported by the amide-containing N5 ligand dpaq (dpaq = 2-[bis(pyridin-2-ylmethyl)]amino-N-quinolin-8-yl-acetamidate) was generated by treatment of the manganese(II) species, [Mn(II)(dpaq)](OTf), with dioxygen in acetonitrile solution at 25 °C. This oxygenation reaction proceeds with essentially quantitative yield (greater than 98% isolated yield) and represents a rare example of an O2-mediated oxidation of a manganese(II) complex to generate a single product. The X-ray diffraction structure of [Mn(III)(OH)(dpaq)](+) reveals a short Mn-OH distance of 1.806(13) Å, with the hydroxo moiety trans to the amide function of the dpaq ligand. No shielding of the hydroxo group is observed in the solid-state structure. Nonetheless, [Mn(III)(OH)(dpaq)](+) is remarkably stable, decreasing in concentration by only 10% when stored in MeCN at 25 °C for 1 week. The [Mn(III)(OH)(dpaq)](+) complex participates in proton-coupled electron transfer reactions with substrates with relatively weak O-H and C-H bonds. For example, [Mn(III)(OH)(dpaq)](+) oxidizes TEMPOH (TEMPOH = 2,2'-6,6'-tetramethylpiperidine-1-ol), which has a bond dissociation free energy (BDFE) of 66.5 kcal/mol, in MeCN at 25 °C. The hydrogen/deuterium kinetic isotope effect of 1.8 observed for this reaction implies a concerted proton-electron transfer pathway. The [Mn(III)(OH)(dpaq)](+) complex also oxidizes xanthene (C-H BDFE of 73.3 kcal/mol in dimethylsulfoxide) and phenols, such as 2,4,6-tri-t-butylphenol, with BDFEs of less than 79 kcal/mol. Saturation kinetics were observed for phenol oxidation, implying an initial equilibrium prior to the rate-determining step. On the basis of a collective body of evidence, the equilibrium step is attributed to the formation of a hydrogen-bonding complex between [Mn(III)(OH)(dpaq)](+) and the phenol substrates.

  12. Wire bonding in microelectronics

    CERN Document Server

    Harman, George G

    2010-01-01

    Wire Bonding in Microelectronics, Third Edition, has been thoroughly revised to help you meet the challenges of today's small-scale and fine-pitch microelectronics. This authoritative guide covers every aspect of designing, manufacturing, and evaluating wire bonds engineered with cutting-edge techniques. In addition to gaining a full grasp of bonding technology, you'll learn how to create reliable bonds at exceedingly high yields, test wire bonds, solve common bonding problems, implement molecular cleaning methods, and much more. Coverage includes: Ultrasonic bonding systems and technologies, including high-frequency systems Bonding wire metallurgy and characteristics, including copper wire Wire bond testing Gold-aluminum intermetallic compounds and other interface reactions Gold and nickel-based bond pad plating materials and problems Cleaning to improve bondability and reliability Mechanical problems in wire bonding High-yield, fine-pitch, specialized-looping, soft-substrate, and extreme-temperature wire bo...

  13. Solitons on H bonds in proteins

    DEFF Research Database (Denmark)

    d'Ovidio, F.; Bohr, H.G.; Lindgård, Per-Anker

    2003-01-01

    system shows that the solitons are spontaneously created and are stable and moving along the helix axis. A perturbation on one of the three H-bond lines forms solitons on the other H bonds as well. The robust solitary wave may explain very long-lived modes in the frequency range of 100 cm(-1) which...... are found in recent x-ray laser experiments. The dynamics parameters of the Toda lattice are in accordance with the usual Lennard-Jones parameters used for realistic H-bond potentials in proteins....

  14. Hydrogen bonds and twist in cellulose microfibrils.

    Science.gov (United States)

    Kannam, Sridhar Kumar; Oehme, Daniel P; Doblin, Monika S; Gidley, Michael J; Bacic, Antony; Downton, Matthew T

    2017-11-01

    There is increasing experimental and computational evidence that cellulose microfibrils can exist in a stable twisted form. In this study, atomistic molecular dynamics (MD) simulations are performed to investigate the importance of intrachain hydrogen bonds on the twist in cellulose microfibrils. We systematically enforce or block the formation of these intrachain hydrogen bonds by either constraining dihedral angles or manipulating charges. For the majority of simulations a consistent right handed twist is observed. The exceptions are two sets of simulations that block the O2-O6' intrachain hydrogen bond, where no consistent twist is observed in multiple independent simulations suggesting that the O2-O6' hydrogen bond can drive twist. However, in a further simulation where exocyclic group rotation is also blocked, right-handed twist still develops suggesting that intrachain hydrogen bonds are not necessary to drive twist in cellulose microfibrils. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Coumarin amide derivatives as fluorescence chemosensors for cyanide anions

    International Nuclear Information System (INIS)

    Wu, Qianqian; Liu, Zhiqiang; Cao, Duxia; Guan, Ruifang; Wang, Kangnan; Shan, Yanyan; Xu, Yongxiao; Ma, Lin

    2015-01-01

    Four coumarin amide derivatives with 4-methyl coumarin or pyrene as terminal group have been synthesized. Their photophysical properties and recognition properties for cyanide anions have been examined. The results indicate that the compounds can recognize cyanide anions with obvious absorption and fluorescence spectra change, at the same time, obvious color and fluorescence change can be observed by naked eye. The in situ hydrogen nuclear magnetic resonance spectra and photophysical properties change confirm that Michael additions between the chemosensors and cyanide anions take place at the 4-position of coumarin. - Highlights: • Four coumarin amide derivatives with 4-methyl coumarin or pyrene as terminal group were synthesized. • The compounds can recognize cyanide anions with obvious absorption and fluorescence spectra change. • Michael additions between the chemosensors and cyanide anions take place at the 4-position of coumarin

  16. Actinide extraction by substituted amides or diamides from carboxylic acids

    International Nuclear Information System (INIS)

    Cuillerdier, C.; Musikas, C.; Morisseau, J.C.; Hoel, P.; Guillaume, B.

    1987-01-01

    Amides are studied for use in reprocessing, these solvents can be incinerated and radiolytic degradation have no effect on the process. Main research fields are: 1) Monoamides type RCONR 2 allow U (VI) and Pu (IV) extraction like TBP. Ramified R and R' increase the amount of U extracted, the selectivity U/Pu and U + Pu/Fission products. A counter current test gave encouraging results. 2) Diamides for trivalent actinide extraction from radioactive wastes and especially malonamides. Extraction coefficient in function of HNO 3 concentration are measured for Am (III), En (III), Pu (IV), U (VI) and Zr (IV). Zr should be complexed in aqueous phase to avoid extraction with actinides. Selection of solvent is not yet possible but amides are interesting as alternate extractants [fr

  17. Electronic structure effects of amide group: Vince lactam

    Science.gov (United States)

    Novak, Igor; Kovač, Branka

    2005-03-01

    HeI photoelectron spectrum of 2-azabicyclo[2.2.1]hept-5-en-3-one (Vince lactam) has been measured. The assignment of the spectrum was made by comparison with photoelectron spectra of related compounds and by taking into account the lactam's molecular structure. The analysis of the electronic structure of amide group, in terms of inductive and conjugative effects, is presented on the basis of photoelectron spectroscopic data.

  18. Toxocara canis: Larvicidal activity of fatty acid amides.

    Science.gov (United States)

    Mata-Santos, Taís; D'Oca, Caroline da Ros Montes; Mata-Santos, Hílton Antônio; Fenalti, Juliana; Pinto, Nitza; Coelho, Tatiane; Berne, Maria Elisabeth; da Silva, Pedro Eduardo Almeida; D'Oca, Marcelo Gonçalves Montes; Scaini, Carlos James

    2016-02-01

    Considering the therapeutic potential of fatty acid amides, the present study aimed to evaluate their in vitro activity against Toxocara canis larvae and their cytotoxicity for the first time. Linoleylpyrrolidilamide was the most potent, with a minimal larvicidal concentration (MLC) of 0.05 mg/mL and 27% cytotoxicity against murine peritoneal macrophages C57BL/6 mice, as assessed by the MTT assay. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. [Amides of amino acids and peptides as antifungal agents].

    Science.gov (United States)

    Giori, P; Vertuani, G; Mazzotta, D; Guarneri, M; Pancaldi, D; Brunelli, A

    1982-07-01

    The synthesis of pyrazolyl-amides of aminoacids and peptides is described. The chemicals were tested for antifungal activity against wheat powdery mildew (Erysiphe graminis DC.), cucumber powdery mildew (Erysiphe cichoracearum DC.), wheat brown rust (Puccinia recondita Rob. ex Desm. f. sp. tritici Erikss et Henn.), celery leaf spot (Septoria Apii Briosi ed Cav. Chest.) and collar rot (Rhizoctonia solani Kuhn). Some of these compounds showed antifungal activity.

  20. Interacting Blends of Novel Unsaturated Polyester Amide Resin with Styrene

    OpenAIRE

    Patel, Hasmukh S.; Panchal, Kumar K.

    2004-01-01

    Novel unsaturated poly (ester-amide) resins (UPEAs) were prepared by the reaction between an epoxy resin, namely diglycidyl ether of bisphenol–A (DGEBA) and unsaturated aliphatic bisamic acids using a base catalyst. These UPEAs were then blended with a vinyl monomer namely, Styrene (STY.) to produce a homogeneous resin syrup. The curing of these UPEAs-STY. resin blends was carried out by using benzoyl peroxide (BPO) as a catalyst and was monitored by using a differential scanning calorimeter ...

  1. The professional agency of teacher educators amid academic discourses

    OpenAIRE

    Hökkä, Päivi; Eteläpelto, Anneli; Rasku-Puttonen, Helena

    2012-01-01

    Agency has been seen as fundamental in the renegotiation of professional identities. However, it is unclear how teacher educators exercise their professional agency in their work, and how multiple discourses frame and restrict the practice of their professional agency. This study examines how teacher educators practise agency in negotiating their professional identities amid the multiple discourses emerging from the academic context of their work. The aim was to investigate educators’ locally...

  2. Effect of structure on extraction ability of phosphoric acid amides

    International Nuclear Information System (INIS)

    Laskorin, B.N.; Buchikhin, E.P.; Yakshin, V.V.

    1976-01-01

    Effective constants of uranium (6) extraction with amides and esteroamides based on the acids of phosphorus of various structures have been determined. The component analysis of the complexes obtained points to the formation of a compound with the metal/ligand ratio = 2. The introduction of alkyl amine substituents in the molecule of the neutral esters of organophosphoric acids is shown to lead to a substantial increase in their extraction capacity [ru

  3. Hindered Csbnd N bond rotation in triazinyl dithiocarbamates

    Science.gov (United States)

    Jung, Taesub; Do, Hee-Jin; Son, Jongwoo; Song, Jae Hee; Cha, Wansik; Kim, Yeong-Joon; Lee, Kyung-Koo; Kwak, Kyungwon

    2018-01-01

    The substituent and solvent effects on the rotation around a Csbnd N amide bond were studied for a series of triazine dibenzylcarbamodithioates. The Gibbs free energies (ΔG‡) were measured to be 16-18 kcal/mol in DMSO-d6 and toluene-d8 using variable-temperature nuclear magnetic resonance (VT-1H NMR) spectroscopy. Density functional theory (DFT) calculations reproduced the experimental observations with various substituents, as well as solvents. From the detailed analysis of the DFT results, we found that the electron donating dibenzyl amine group increased the electron population on the triazinyl ring, which decreased the rotational barrier of the Csbnd N bond in the dithiocarbamate group attached to the triazinyl ring. The higher electron population on the triazine moiety stabilizes the partial double bond character of the Ssbnd C bond, which competitively excludes the double bond character of the Csbnd N bond. Therefore, the rotational dynamics of the Csbnd N bond in dithiocarbamates can be a sensitive probe to small differences in the electron population of substituents on sulfur.

  4. X hydrogen bonds

    Indian Academy of Sciences (India)

    sigma electrons, can be hydrogen bond acceptors.11–14. The recent IUPAC report and recommendation on hydro gen bond have recognised the diverse nature of hydro- gen bond donors and acceptors.13,14. Unlike methane, hydrogen bonding by higher alkanes has not received much attention. One of the earlier works.

  5. Adhesive wafer bonding

    Science.gov (United States)

    Niklaus, F.; Stemme, G.; Lu, J.-Q.; Gutmann, R. J.

    2006-02-01

    Wafer bonding with intermediate polymer adhesives is an important fabrication technique for advanced microelectronic and microelectromechanical systems, such as three-dimensional integrated circuits, advanced packaging, and microfluidics. In adhesive wafer bonding, the polymer adhesive bears the forces involved to hold the surfaces together. The main advantages of adhesive wafer bonding include the insensitivity to surface topography, the low bonding temperatures, the compatibility with standard integrated circuit wafer processing, and the ability to join different types of wafers. Compared to alternative wafer bonding techniques, adhesive wafer bonding is simple, robust, and low cost. This article reviews the state-of-the-art polymer adhesive wafer bonding technologies, materials, and applications.

  6. Enzymatically and reductively degradable α-amino acid-based poly(ester amide)s: Synthesis, cell compatibility, and intracellular anticancer drug delivery

    NARCIS (Netherlands)

    Sun, H.; Cheng, Ru; Deng, Chao; Meng, Fenghua; Dias, Aylvin A.; Hendriks, Marc; Feijen, Jan; Zhong, Zhiyuan

    2015-01-01

    A novel and versatile family of enzymatically and reductively degradable α-amino acid-based poly(ester amide)s (SS-PEAs) were developed from solution polycondensation of disulfide-containing di-p-toluenesulfonic acid salts of bis-l-phenylalanine diesters (SS-Phe-2TsOH) with di-p-nitrophenyl adipate

  7. High-resolution crystal structures of protein helices reconciled with three-centered hydrogen bonds and multipole electrostatics.

    Science.gov (United States)

    Kuster, Daniel J; Liu, Chengyu; Fang, Zheng; Ponder, Jay W; Marshall, Garland R

    2015-01-01

    Theoretical and experimental evidence for non-linear hydrogen bonds in protein helices is ubiquitous. In particular, amide three-centered hydrogen bonds are common features of helices in high-resolution crystal structures of proteins. These high-resolution structures (1.0 to 1.5 Å nominal crystallographic resolution) position backbone atoms without significant bias from modeling constraints and identify Φ = -62°, ψ = -43 as the consensus backbone torsional angles of protein helices. These torsional angles preserve the atomic positions of α-β carbons of the classic Pauling α-helix while allowing the amide carbonyls to form bifurcated hydrogen bonds as first suggested by Némethy et al. in 1967. Molecular dynamics simulations of a capped 12-residue oligoalanine in water with AMOEBA (Atomic Multipole Optimized Energetics for Biomolecular Applications), a second-generation force field that includes multipole electrostatics and polarizability, reproduces the experimentally observed high-resolution helical conformation and correctly reorients the amide-bond carbonyls into bifurcated hydrogen bonds. This simple modification of backbone torsional angles reconciles experimental and theoretical views to provide a unified view of amide three-centered hydrogen bonds as crucial components of protein helices. The reason why they have been overlooked by structural biologists depends on the small crankshaft-like changes in orientation of the amide bond that allows maintenance of the overall helical parameters (helix pitch (p) and residues per turn (n)). The Pauling 3.6(13) α-helix fits the high-resolution experimental data with the minor exception of the amide-carbonyl electron density, but the previously associated backbone torsional angles (Φ, Ψ) needed slight modification to be reconciled with three-atom centered H-bonds and multipole electrostatics. Thus, a new standard helix, the 3.6(13/10)-, Némethy- or N-helix, is proposed. Due to the use of constraints from

  8. Stable Isotope Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Tissue samples (skin, bone, blood, muscle) are analyzed for stable carbon, stable nitrogen, and stable sulfur analysis. Many samples are used in their entirety for...

  9. Dentin bonding system. Part I: Literature review.

    Science.gov (United States)

    Miyazaki, M; Oshida, Y; Xirouchaki, L

    1996-01-01

    Currently, clinicians face choices of restoration including amalgams (mercury-based, gallium-based alloys, or mercury-free silver-based substitutes), composite resins, ceramics, and gold alloy. In order to choose an appropriate restorative material, many parameters are involved; they include preparation time requirements, finishing and polishing, marginal integrity, anatomy and contours, chipping and fracture, sensitivity, microleakage, wear resistance, and corrosion resistance. It is generally believed that amalgams are still evaluated as the best of all restorative materials as far as the aforementioned parameters are concerned. It is claimed that the amalgams exhibit in the range of 10 to 25 service years, while the composite resin exhibits ranging between 7 and 11 service years. When a composite resin requires a mass large enough for indirect fabrication, a bonding system is demanded with which this restoration should form an instantaneous, impervious, and stable bond to the tooth structure. Roughly a quarter century has passed since the research and development of a promising dentin bonding system was initiated. We are now in the fifth generation of the dentin bonding system, during the research and development of which various types of bonding agents as well as bonding models have been introduced. In this article, the history of development of the bonding agents and the understanding of the bonding mechanism will be reviewed.

  10. One hundred years of Lewis Chemical Bond!

    Indian Academy of Sciences (India)

    2016-09-20

    Sep 20, 2016 ... Having understood the stable electronic configuration of the rare gases, Lewis suggested that H and F atom can both attain such configuration, if they were to share one electron with each other. He developed a cubic model of atoms with each surrounded by 8 electrons after forming electron pair bonds.

  11. Halogen Bonds in Novel Polyhalogen Monoanions.

    Science.gov (United States)

    Wang, Changwei; Danovich, David; Shaik, Sason; Mo, Yirong

    2017-06-27

    Polyhalogen monoanions [X 2n+1 ] - (X=Cl and Br; n=1, 2, 3, 4, and 5) have been systematically studied using the block-localized wave function (BLW) method, which offers a valence bond (VB) analysis. For each species, the most stable isomer can be described as a central halide anion X - non-classically bonded to a number of dihalogen molecules X 2 via "halogen bonds". VB analyses confirm the dominant role of the charge-transfer interaction between the lone pair on X - and the σ-anti-bonding orbital of X 2 molecule (n→σ*) in X 3 - and higher analogues. Thus, our study demonstrates that these halogen bonds are essentially dative covalent interactions. Importantly, the charge-transfer interaction between [X 2n-1 ] - and X 2 decreases with the increasing n, in accord with the weakening of the Lewis basicity as characterized by the corresponding HOMO energy. The reduction of the charge transfer interaction underscores the reduction of covalence in halogen bonds in [X 2n+1 ] - . This tendency highlights the anti-cooperative effect in polyhalogen monoanions. All in all, the halogen bond between X - and nX 2 molecules exhibits the same trends as in X - with a single X 2 molecule. In other words, halogen bonding in the larger clusters derives from the same bonding mechanism as the [X 3 ] - anion. As such, the X - ⋅⋅⋅X 2 halogen bond at different bond lengths forms a gauge of covalence for the entire [X 2n+1 ] - family. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Influence of Amide/Amine vs Nis-Amide Coordination in Nickel Superoxide Dismutase

    Energy Technology Data Exchange (ETDEWEB)

    Neupane,K.; Shearer, J.

    2006-01-01

    Nickel superoxide dismutase (NiSOD) is a mononuclear nickel-containing metalloenzyme that catalyzes the disproportionation of superoxide by cycling between Ni{sup II} and Ni{sup III} oxidation states. In the reduced Ni{sup II} oxidation state, the metal center is ligated by two cysteinate sulfurs, one amide nitrogen, and one amine nitrogen (from the N-terminus), while in the oxidized Ni{sup III} state, an imidazole nitrogen coordinates to the metal center. Herein, we expand on a previous report in which we described a functional metallopeptide-based NiSOD model compound [Ni{sup II}(SOD{sup M1})] (SOD{sup M1} = H{sub 2}N-HCDLPCGVYDPA-COOH) by exploring how acylation of the N-terminus (producing [Ni{sup II}(SOD{sup M1}-Ac)]) influences the properties of the metallopeptide. Titration results, GPC data, and mass-spectrometry data demonstrate that Ni{sup II} coordinates to SOD{sup M1}-Ac in a 1:1 ratio, while variable pH studies show that Ni{sup II} coordination is strong at a pH of 7.5 and above but not observed below a pH of 6.2. This is higher than [Ni{sup II}(SOD{sup M1})] by {approx}1.0 pH unit consistent with bisamide ligation. Ni K-edge XAS demonstrates that the Ni{sup II} center is coordinated in a square-planar NiN{sub 2}S{sub 2} coordination environment with Ni-N distances of 1.846(4) {angstrom} and Ni-S distances of 2.174(3) {angstrom}. Comparison of the electronic absorption and CD spectrum of [Ni{sup II}(SOD{sup M1})] versus [Ni{sup II}(SOD{sup M1}-Ac)] in conjunction with time-dependent DFT calculations suggests a decrease in Ni covalency in the acylated versus unacylated metallopeptide. This decrease in covalency was also supported by DFT calculations and Ni L-edge XAS. [Ni{sup II}(SOD{sup M1}-Ac)] has a quasireversible Ni{sup II}/Ni{sup III} redox couple of 0.49(1) V vs Ag/AgCl, which represents a -0.2 V shift compared with [Ni{sup II}(SOD{sup M1})], while the peak separation suggests a change in the coordination environment upon oxidation (i.e., axial

  13. Lithium Enolates in the Enantioselective Construction of Tetrasubstituted Carbon Centers with Chiral Lithium Amides as Noncovalent Stereodirecting Auxiliaries.

    Science.gov (United States)

    Yu, Kai; Lu, Ping; Jackson, Jeffrey J; Nguyen, Thuy-Ai D; Alvarado, Joseph; Stivala, Craig E; Ma, Yun; Mack, Kyle A; Hayton, Trevor W; Collum, David B; Zakarian, Armen

    2017-01-11

    Lithium enolates derived from carboxylic acids are ubiquitous intermediates in organic synthesis. Asymmetric transformations with these intermediates, a central goal of organic synthesis, are typically carried out with covalently attached chiral auxiliaries. An alternative approach is to utilize chiral reagents that form discrete, well-defined aggregates with lithium enolates, providing a chiral environment conducive of asymmetric bond formation. These reagents effectively act as noncovalent, or traceless, chiral auxiliaries. Lithium amides are an obvious choice for such reagents as they are known to form mixed aggregates with lithium enolates. We demonstrate here that mixed aggregates can effect highly enantioselective transformations of lithium enolates in several classes of reactions, most notably in transformations forming tetrasubstituted and quaternary carbon centers. Easy recovery of the chiral reagent by aqueous extraction is another practical advantage of this one-step protocol. Crystallographic, spectroscopic, and computational studies of the central reactive aggregate, which provide insight into the origins of selectivity, are also reported.

  14. A Cr(VI) selective probe based on a quinoline-amide calix[4]arene

    Science.gov (United States)

    Ferreira, Juliane F.; Bagatin, Izilda A.

    2018-01-01

    A new quinoline-amide calix[4]arene 3-receptor for detection of hazardous anions and cations have been synthesized. The 3-receptor was examined for its sensing properties towards several different anions (Cr2O72 -, SCN-, F-, Cl-, NO3-) and metal ions (Hg2+, Cd2+, Ag+) by UV-vis and fluorescence spectroscopies. It was detected that the 3-receptor has only sensing ability for Cr2O72 - and Hg2+ ions, resulting in the association constants higher for Cr2O72 - than to the Hg2+ ions. High selectivity towards Cr2O72 - were also observed by fluorescence measurement among other ions (F-, Cl-, SCN-, Hg2+, Cd2+, Ag+) with a low limit of detection (7.36 × 10-6 mol dm-3). Proton NMR anion-binding investigations revealed a strong interaction of Cr2O72 - anion with NH and CH groups of the receptor, showing that the combination with hydrogen-bonds donor groups strengthened the anion receptor association. Furthermore, remarkable association constants for dichromate anion obtained by all techniques strongly suggest the 3-receptor as a selective Cr(VI) sensor.

  15. Synthesis, Antifungal Activity and QSAR of Some Novel Carboxylic Acid Amides

    Directory of Open Access Journals (Sweden)

    Shijie Du

    2015-03-01

    Full Text Available A series of novel aromatic carboxylic acid amides were synthesized and tested for their activities against six phytopathogenic fungi by an in vitro mycelia growth inhibition assay. Most of them displayed moderate to good activity. Among them N-(2-(1H-indazol-1-ylphenyl-2-(trifluoromethylbenzamide (3c exhibited the highest antifungal activity against Pythium aphanidermatum (EC50 = 16.75 µg/mL and Rhizoctonia solani (EC50 = 19.19 µg/mL, compared to the reference compound boscalid with EC50 values of 10.68 and 14.47 µg/mL, respectively. Comparative molecular field analysis (CoMFA and comparative molecular similarity indices analysis (CoMSIA were employed to develop a three-dimensional quantitative structure-activity relationship model for the activity of the compounds. In the molecular docking, a fluorine atom and the carbonyl oxygen atom of 3c formed hydrogen bonds toward the hydroxyl hydrogens of TYR58 and TRP173.

  16. Direct Catalytic Asymmetric Mannich-Type Reaction of α- and β-Fluorinated Amides.

    Science.gov (United States)

    Brewitz, Lennart; Arteaga, Fernando Arteaga; Yin, Liang; Alagiri, Kaliyamoorthy; Kumagai, Naoya; Shibasaki, Masakatsu

    2015-12-23

    The last two decades have witnessed the emergence of direct enolization protocols providing atom-economical and operationally simple methods to use enolates for stereoselective C-C bond-forming reactions, eliminating the inherent drawback of the preformation of enolates using stoichiometric amounts of reagents. In its infancy, direct enolization relied heavily on the intrinsic acidity of the latent enolates, and the reaction scope was limited to readily enolizable ketones and aldehydes. Recent advances in this field enabled the exploitation of carboxylic acid derivatives for direct enolization, offering expeditious access to synthetically versatile chiral building blocks. Despite the growing demand for enantioenriched fluorine-containing small molecules, α- and β-fluorinated carbonyl compounds have been neglected in direct enolization chemistry because of the competing and dominating defluorination pathway. Herein we present a comprehensive study on direct and highly stereoselective Mannich-type reactions of α- and β-fluorine-functionalized 7-azaindoline amides that rely on a soft Lewis acid/hard Brønsted base cooperative catalytic system to guarantee an efficient enolization while suppressing undesired defluorination. This protocol contributes to provide a series of fluorinated analogs of enantioenriched β-amino acids for medicinal chemistry.

  17. Influence of the O-phosphorylation of serine, threonine and tyrosine in proteins on the amidic ¹⁵N chemical shielding anisotropy tensors.

    Science.gov (United States)

    Emmer, Jiří; Vavrinská, Andrea; Sychrovský, Vladimír; Benda, Ladislav; Kříž, Zdeněk; Koča, Jaroslav; Boelens, Rolf; Sklenář, Vladimír; Trantírek, Lukáš

    2013-01-01

    Density functional theory was employed to study the influence of O-phosphorylation of serine, threonine, and tyrosine on the amidic (15)N chemical shielding anisotropy (CSA) tensor in the context of the complex chemical environments of protein structures. Our results indicate that the amidic (15)N CSA tensor has sensitive responses to the introduction of the phosphate group and the phosphorylation-promoted rearrangement of solvent molecules and hydrogen bonding networks in the vicinity of the phosphorylated site. Yet, the calculated (15)N CSA tensors in phosphorylated model peptides were in range of values experimentally observed for non-phosphorylated proteins. The extent of the phosphorylation induced changes suggests that the amidic (15)N CSA tensor in phosphorylated proteins could be reasonably well approximated with averaged CSA tensor values experimentally determined for non-phosphorylated amino acids in practical NMR applications, where chemical surrounding of the phosphorylated site is not known a priori in majority of cases. Our calculations provide estimates of relative errors to be associated with the averaged CSA tensor values in interpretations of NMR data from phosphorylated proteins.

  18. Effect of the Unsaturation of the Hydrocarbon Chain of Fatty-Amides on the CO2 Corrosion of Carbon Steel Using EIS and Real-Time Corrosion Measurement

    Directory of Open Access Journals (Sweden)

    J. Porcayo-Calderon

    2015-01-01

    Full Text Available Fatty-amide derivatives were evaluated to study the effect of the double bonds into the hydrocarbon chain (C18 on the corrosion behavior of carbon steel. Electrochemical impedance spectroscopy (EIS and real-time corrosion measurements were used to evaluate the inhibition mechanism of the fatty-amides on carbon steel in CO2-saturated (3% NaCl + 10% diesel emulsion at 50°C. EIS results demonstrated that the unsaturation present into the hydrocarbon chain contributes to the efficiency of fatty-amides, because they can be adsorbed on the metal surface by a flat-adsorption process reducing the presence of active sites and blocking the corrosion process and preventing the diffusion of corrosive species, such as H2O, H+, Cl−, and HCO3-. Real-time corrosion measurements also indicated that the effectiveness of the inhibitors is dependent on the unsaturation into the hydrocarbon chain, being also a good technique to determine the stability of the adsorption process of the inhibitors.

  19. FMRF-amide-like immunoreactivity in brain and pituitary of the hagfish Eptatretus burgeri (Cyclostomata)

    DEFF Research Database (Denmark)

    Jirikowski, G; Erhart, G; Grimmelikhuijzen, C J

    1984-01-01

    Paraffin sections of brain and pituitary of the hagfish Eptatretus burgeri were immunostained with an antiserum to FMRF-amide. Immunoreactivity was visible in a large number of neurons in the posterior part of the ventromedial hypothalamus and in long neuronal processes extending cranially from...... the hypothalamus to the olfactory system and caudally to the medulla oblongata. FMRF-amide-like immunoreactivity was also found in cells of the adenohypophysis. These observations suggest that the hagfish possesses a brain FMRF-amide-like transmitter system and pituitary cells containing FMRF-amide-like material...

  20. Synthesis of new fatty acids amides from aminolysis of fatty acid methyl esters (FAMEs)

    International Nuclear Information System (INIS)

    Lopes, Carolina R.; Montes D'Oca, Caroline da Ros; Duarte, Rodrigo da C.; Kurz, Marcia H.S.; Primel, Ednei G.; Clementin, Rosilene M.; Villarreyes, Joaquin Ariel M.; Montes D'Oca, Marcelo G.

    2010-01-01

    Recent biochemical and pharmacological studies have led to the characterization of different fatty acid amides as a new family of biologically active lipids. Here, we describe the synthesis of new amides from C16:0, 18:0, 18:1 and 18:1, OH fatty acids (FFA) families with cyclic and acyclic amines and demonstrate for the first time that these compounds produce cytotoxic effects. Application of this method to the synthesis of fatty acid amides was performed using the esters aminolysis as a key step and various carboxylic amides were prepared in good yield from fatty acid methyl esters (FAMEs). (author)

  1. Looking at hydrogen bonds in cellulose.

    Science.gov (United States)

    Nishiyama, Yoshiharu; Langan, Paul; Wada, Masahisa; Forsyth, V Trevor

    2010-11-01

    A series of cellulose crystal allomorphs has been studied using high-resolution X-ray and neutron fibre diffraction to locate the positions of H atoms involved in hydrogen bonding. One type of position was always clearly observed in the Fourier difference map (F(d)-F(h)), while the positions of other H atoms appeared to be less well established. Despite the high crystallinity of the chosen samples, neutron diffraction data favoured some hydrogen-bonding disorder in native cellulose. The presence of disorder and a comparison of hydrogen-bond geometries in different allomorphs suggests that although hydrogen bonding may not be the most important factor in the stabilization of cellulose I, it is essential for stabilizing cellulose III, which is the activated form, and preventing it from collapsing back to the more stable cellulose I.

  2. Water, Hydrogen Bonding and the Microwave Background

    Directory of Open Access Journals (Sweden)

    Robitaille P.-M.

    2009-04-01

    Full Text Available n this work, the properties of the water are briefly revisited. Though liquid water has a fleeting structure, it displays an astonishingly stable network of hydrogen bonds. Thus, even as a liquid, water possesses a local lattice with short range order. The presence of hydroxyl (O-H and hydrogen (H....OH2 bonds within water, indicate that it can simultaneously maintain two separate energy systems. These can be viewed as two very different temperatures. The analysis presented uses results from vibrational spec- troscopy, extracting the force constant for the hydrogen bonded dimer. By idealizing this species as a simple diatomic structure, it is shown that hydrogen bonds within wa- ter should be able to produce thermal spectra in the far infrared and microwave regions of the electromagnetic spectrum. This simple analysis reveals that the oceans have a physical mechanism at their disposal, which is capable of generating the microwave background.

  3. Coordination compounds of cobalt and cadmium with isobutyric acid amide

    International Nuclear Information System (INIS)

    Tsivadze, A.Yu.; Ivanova, I.S.; Solovkina, O.A.

    1983-01-01

    Coordination compounds of cobalt and cadmium with isobutyric acid amide (IBAA) of Co(NCS) 2 x(IBAA) 2 (H 2 O) 2 , CoCl 2 (IBAA) 4 , CoI 2 (IBAA) 8 (H 2 O) 2 , CdI 2 (IBAA) 2 composition have been synthesized and characterized. Their infrared absorption spectra (200-400 cm -1 ), electron reflection spectra (200-750 nm) were studied. It is shown that in all compounds there are IBAA molecUles coordinated through an oxygen atom. Thiocyanogroups are coordinated throUgh nitrogen atoms

  4. Antiproliferative activity of synthetic fatty acid amides from renewable resources.

    Science.gov (United States)

    dos Santos, Daiane S; Piovesan, Luciana A; D'Oca, Caroline R Montes; Hack, Carolina R Lopes; Treptow, Tamara G M; Rodrigues, Marieli O; Vendramini-Costa, Débora B; Ruiz, Ana Lucia T G; de Carvalho, João Ernesto; D'Oca, Marcelo G Montes

    2015-01-15

    In the work, the in vitro antiproliferative activity of a series of synthetic fatty acid amides were investigated in seven cancer cell lines. The study revealed that most of the compounds showed antiproliferative activity against tested tumor cell lines, mainly on human glioma cells (U251) and human ovarian cancer cells with a multiple drug-resistant phenotype (NCI-ADR/RES). In addition, the fatty methyl benzylamide derived from ricinoleic acid (with the fatty acid obtained from castor oil, a renewable resource) showed a high selectivity with potent growth inhibition and cell death for the glioma cell line-the most aggressive CNS cancer. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. A new phenolic amide glycoside from Cimicifuga dahurica.

    Science.gov (United States)

    Zhang, Fan; Han, Li-Feng; Pan, Gui-Xiang; Peng, Shuang; Andre, Ndagijimana

    2013-08-01

    A new phenolic amide glycoside, cimicifugamide A (1) along with four known compounds, trans-feruloyl tyramine 4-O-beta-D-glucopyranoside (2), (+)-isolariciresinol 3-O-beta-D-glucopyranoside (3), cimidahurine (4), and 24-epi-7, 8-didehydrocimigenol-3-O-beta-D-xylopyranoside (5) were isolated from the rhizomes of Cimicifuga dahurica. Compound 3 was identified as a lignan and has been obtained from Cimicifuga genus for the first time. The structure of compound 1 was elucidated by IR, UV, HR-MS and NMR spectroscopic methods.

  6. Australia's Bond Home Bias

    OpenAIRE

    Anil V. Mishra; Umaru B. Conteh

    2014-01-01

    This paper constructs the float adjusted measure of home bias and explores the determinants of bond home bias by employing the International Monetary Fund's high quality dataset (2001 to 2009) on cross-border bond investment. The paper finds that Australian investors' prefer investing in countries with higher economic development and more developed bond markets. Exchange rate volatility appears to be an impediment for cross-border bond investment. Investors prefer investing in countries with ...

  7. Stable convergence and stable limit theorems

    CERN Document Server

    Häusler, Erich

    2015-01-01

    The authors present a concise but complete exposition of the mathematical theory of stable convergence and give various applications in different areas of probability theory and mathematical statistics to illustrate the usefulness of this concept. Stable convergence holds in many limit theorems of probability theory and statistics – such as the classical central limit theorem – which are usually formulated in terms of convergence in distribution. Originated by Alfred Rényi, the notion of stable convergence is stronger than the classical weak convergence of probability measures. A variety of methods is described which can be used to establish this stronger stable convergence in many limit theorems which were originally formulated only in terms of weak convergence. Naturally, these stronger limit theorems have new and stronger consequences which should not be missed by neglecting the notion of stable convergence. The presentation will be accessible to researchers and advanced students at the master's level...

  8. Hydrogen-bond detection in peptides by 1H-nuclear magnetic resonance through a hydrogen-chlorine exchange reaction

    International Nuclear Information System (INIS)

    Kondo, Michio; Nishi, Ichiro; Yamamoto, Makoto; Jelokhani-Niaraki, M.; Kodama, Hiroaki; Okamoto, Kouji.

    1994-01-01

    NMR spectroscopy is a versatile method for the conformational analysis of peptides and proteins. The hydrogen-chlorine exchange of amide NH protons is detected by 1 H NMR and used as a method to distinguish between intramolecularly hydrogen-bonded and solvent-exposed NH moieties. The method has been applied to hydrogen bond detection in naturally occurring antibiotic peptides, such as gramicidin S, and CH 3 CONH-X (X=alkyl- or aryl-) derivatives. The deuterium exchange method was compared with this method in parallel experiments. In the case of chlorine exchange, in contrast to deuterium exchange, the hydrogen-bonded amide protons are replaced much faster than their solvent-exposed counterparts and the duration of the experiments is considerably less. It is highly possible that the hydrogen-chlorine exchange reaction under the present experimental conditions, in the dark and at room temperature, proceeds through an electrophilic polar mechanism. (author)

  9. Chemical bond fundamental aspects of chemical bonding

    CERN Document Server

    Frenking, Gernot

    2014-01-01

    This is the perfect complement to ""Chemical Bonding - Across the Periodic Table"" by the same editors, who are two of the top scientists working on this topic, each with extensive experience and important connections within the community. The resulting book is a unique overview of the different approaches used for describing a chemical bond, including molecular-orbital based, valence-bond based, ELF, AIM and density-functional based methods. It takes into account the many developments that have taken place in the field over the past few decades due to the rapid advances in quantum chemica

  10. The development of autoclave processable, thermally stable adhesives for titanium alloy and graphite composite structures

    Science.gov (United States)

    Vaughan, R. W.; Jones, R. J.

    1971-01-01

    The A-type polyimide adhesive resin P11B was modified by use of mixed diamines (thio-dianiline and meta phenylene diamine) which provided the desired autoclave processability. This new resin was termed P11BA. It was shown that copolymeric blends of P11BA and Amoco AI-1137 amide-imide resin provided improved adhesive properties when autoclave processed over the properties obtained previously by press bonding with P11B based copolymeric blended adhesives. Properties of bonded assemblies are presented for long-term aging at both elevated and low temperatures, and also stress-rupture tests at elevated temperature.

  11. Quantitative structure-activity relationship study of amide mosquito repellents.

    Science.gov (United States)

    Wang, P; Xu, X; Liao, S; Song, J; Fan, G; Chen, S; Wang, Z

    2017-04-01

    A quantitative structure-activity relationship (QSAR) study on 43 amide repellents was carried out by the heuristic method in order to reveal the correlations between molecular parameters of these amides and their repellency against Aedes aegypti. Sketches and optimizations of molecular structures were achieved by the Gaussian software package. Generation and screening of molecular parameters were accomplished using CODESSA 2.7.10 software. The leave-one-out method was applied for the model validation. The results showed that a four-descriptor QSAR model with r 2 of 0.897 was obtained. The average r 2 values of the training set and test set of the QSAR model were 0.901 and 0.863, respectively, which suggested that the stability and predictability of the model were confirmed. Analysis of the implications of the descriptors that constitute the QSAR model indicated that all the descriptors were related to the charge distribution over the molecule and affect the dipole moment of the repellents.

  12. Poly(ester amide)s based on (L)-lactic acid oligomers and α-amino acids: influence of the α-amino acid side chain in the poly(ester amide)s properties.

    Science.gov (United States)

    Fonseca, Ana C; Coelho, Jorge F J; Valente, Joana F A; Correia, Tiago R; Correia, Ilídio J; Gil, Maria H; Simões, Pedro N

    2013-01-01

    Novel biodegradable and low cytotoxic poly(ester amide)s (PEAs) based on α-amino acids and (L)-lactic acid (L-LA) oligomers were successfully synthesized by interfacial polymerization. The chemical structure of the new polymers was confirmed by spectroscopic analyses. Further characterization suggests that the α-amino acid plays a critical role on the final properties of the PEA. L-phenylalanine provides PEAs with higher glass transition temperature, whereas glycine enhances the crystallinity. The hydrolytic degradation in PBS (pH = 7.4) at 37 °C also depends on the α-amino acid, being faster for glycine-based PEAs. The cytotoxic profiles using fibroblast human cells indicate that the PEAs did not elicit an acute cytotoxic effect. The strategy presented in this work opens the possibility of synthesizing biodegradable PEAs with low citotoxicity by an easy and fast method. It is worth to mention also that the properties of these materials can be fine-tuned only by changing the α-amino acid.

  13. Absolute rate constants for the reaction of hypochlorous acid with protein side chains and peptide bonds

    DEFF Research Database (Denmark)

    Pattison, D I; Davies, Michael Jonathan

    2001-01-01

    , absolute second-order rate constants for the reactions of HOCl with protein side chains, model compounds, and backbone amide (peptide) bonds have been determined at physiological pH values. The reactivity of HOCl with potential reactive sites in proteins is summarized by the series: Met (3.8 x 10(7) M(-1......) x s(-1)) > backbone amides (10-10(-3) M(-1) x s(-1)) > Gln(0.03 M(-1) x s(-1)) approximately Asn (0.03 M(-1) x s(-1)). The rate constants for reaction of HOCl with backbone amides (peptide bonds) vary by 4 orders of magnitude with uncharged peptide bonds reacting more readily with HOCl than those....... Proteins are major targets for this oxidant, and such reaction results in side-chain modification, backbone fragmentation, and cross-linking. Despite a wealth of qualitative data for such reactions, little absolute kinetic data is available to rationalize the in vitro and in vivo data. In this study...

  14. Cobalt-Catalyzed Tandem C-H Activation/C-C Cleavage/C-H Cyclization of Aromatic Amides with Alkylidenecyclopropanes.

    Science.gov (United States)

    Li, Mingliang; Kwong, Fuk Yee

    2018-03-08

    A cobalt-catalyzed chelation-assisted tandem C-H activation/C-C cleavage/C-H cyclization of aromatic amides with alkylidenecyclopropanes (ACPs) is reported. This process allows the sequential formation of two C-C bonds, in which it is in sharp contrast to previous report of using Rh catalyst for the formation of C-N bond. Here the inexpensive catalyst system exhibits good functional group compatibility and relatively broad substrate scope. The desired products can be easily transformed into polycyclic lactones with m-CPBA. Mechanistic studies revealed that the tandem reaction proceeds through a sequential C-H cobaltation, β-carbon elimination and intramolecular C-H cobaltation pathway. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Functional aspects of cHH C-terminal amidation in crayfish species.

    Science.gov (United States)

    Mosco, Alessandro; Edomi, Paolo; Guarnaccia, Corrado; Lorenzon, Simonetta; Pongor, Sándor; Ferrero, Enrico A; Giulianini, Piero G

    2008-04-10

    The crustacean hyperglycemic hormone is the most abundant neuropeptide present in the eyestalk of Crustacea and its main role is to control the glucose level in the hemolymph. Our study was aimed at assessing the importance of C-terminal amidation for its biological activity. Two recombinant peptides were produced, Asl-rcHH-Gly with a free carboxyl terminus and Asl-rcHH-amide with an amidated C-terminus. Homologous bioassays performed on the astacid crayfish Astacus leptodactylus showed that the amidated peptide had a stronger hyperglycemic effect compared to the non-amidated peptide. To assess the relevance of amidation also in other decapods and how much the differences in the cHH amino acid sequence can affect the functionality of the peptides, we carried out heterologous bioassays on the cambarid Procambarus clarkii and palaemonid Palaemon elegans. The Asl-rcHH-amide elicited a good response in P. clarkii and in P. elegans. The injection of Asl-rcHH-Gly evoked a weak response in both species. These results prove the importance of C-terminal amidation for the biological activity of cHH in crayfish as well as the role of the peptide primary sequence for the species-specificity hormone-receptor recognition.

  16. Transport and partitioning of CO2 fixed by root nodules of ureide and amide producing legumes

    International Nuclear Information System (INIS)

    Vance, C.P.; Boylan, K.L.M.; Maxwell, C.A.; Heichel, G.H.; Hardman, L.L.

    1985-01-01

    Nodulated and denodulated roots of adzuki bean (Vigna angularis), soybean (Glycine max), and alfalfa (Medicago sativa) were exposed to 14 CO 2 to investigate the contribution of nodule CO 2 fixation to assimilation and transport of fixed nitrogen. The distribution of radioactivity in xylem sap and partitioning of carbon fixed by nodules to the whole plant were measured. Radioactivity in the xylem sap of nodulated soybean and adzuki bean was located primarily (70 to 87%) in the acid fraction while the basic (amino acid) fraction contained 10 to 22%. In contrast radioactivity in the xylem sap of nodulated alfalfa was primarily in amino acids with about 20% in organic acids. Total ureide concentration was 8.1, 4.7, and 0.0 micromoles per milliliter xylem sap for soybean, adzuki bean, and alfalfa, respectively. While the major nitrogen transport products in soybeans and adzuki beans are ureides, this class of metabolites contained less than 20% of the the total radioactivity. When nodules of plants were removed, radioactivity in xylem sap decreased by 90% or more. Pulse-chase experiments indicated that CO 2 fixed by nodules was rapidly transported to shoots and incorporated into acid stable constituents. The data are consistent with a role for nodule CO 2 fixation providing carbon for the assimilation and transport of fixed nitrogen in amide-based legumes. In contrast, CO 2 fixation by nodules of ureide transporting legumes appears to contribute little to assimilation and transport of fixed nitrogen. 19 references, 2 figures, 5 tables

  17. Biomimetic L-aspartic acid-derived functional poly(ester amide)s for vascular tissue engineering.

    Science.gov (United States)

    Knight, Darryl K; Gillies, Elizabeth R; Mequanint, Kibret

    2014-08-01

    Functionalization of polymeric biomaterials permits the conjugation of cell signaling molecules capable of directing cell function. In this study, l-phenylalanine and l-aspartic acid were used to synthesize poly(ester amide)s (PEAs) with pendant carboxylic acid groups through an interfacial polycondensation approach. Human coronary artery smooth muscle cell (HCASMC) attachment, spreading and proliferation was observed on all PEA films. Vinculin expression at the cell periphery suggested that HCASMCs formed focal adhesions on the functional PEAs, while the absence of smooth muscle α-actin (SMαA) expression implied the cells adopted a proliferative phenotype. The PEAs were also electrospun to yield nanoscale three-dimensional (3-D) scaffolds with average fiber diameters ranging from 130 to 294nm. Immunoblotting studies suggested a potential increase in SMαA and calponin expression from HCASMCs cultured on 3-D fibrous scaffolds when compared to 2-D films. X-ray photoelectron spectroscopy and immunofluorescence demonstrated the conjugation of transforming growth factor-β1 to the surface of the functional PEA through the pendant carboxylic acid groups. Taken together, this study demonstrates that PEAs containing aspartic acid are viable biomaterials for further investigation in vascular tissue engineering. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  18. stableGP

    Data.gov (United States)

    National Aeronautics and Space Administration — The code in the stableGP package implements Gaussian process calculations using efficient and numerically stable algorithms. Description of the algorithms is in the...

  19. Food emulsions with amidated pectin from celery (Apium graveolens var. rapaceum D.C. tubers

    Directory of Open Access Journals (Sweden)

    Iv. Petrova

    2017-09-01

    Full Text Available Abstract. Hydrocolloids, especially polysaccharides from traditional plant sources and their derivatives possessed significant emulsifying properties. Pectin was isolated from celery tubers by accelerated “green” method for extraction based on ultrasonic irradiation. Further chemical modification of celery pectin was performed with 4 mol/L NH The amidated celery pectin was obtained with the following characteristics: the degree of esterification (DE 31%, the degree of 3. amidation (DA 16%, degree of acetylation (DAc 2% and anhydrouronic acid content (AUAC 68%. This modified pectin was incorporated in preparation of model 30, 40 and 50% oil-in-water emulsions. The effect of amidation of celery pectin on the stability of emulsions was investigated. The results showed that amidation increased the emulsifying properties of pectic polysaccharides. It affected also the rheological characteristics of model emulsion. The current study demonstrated preparation of emulsion with low-caloric amidated pectin as proper alternative to the traditional emulsifiers.

  20. 3D, 2D and 1D networks via NH··· O and NH··· N hydrogen bonding ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 126; Issue 5. 3D, 2D and 1D networks via N-H…O and N-H…N hydrogen bonding by the bis-amide analogues: Effect of chain lengths and odd-even spacers. Gargi Mukherjee Kumar Biradha. Special issue on Chemical Crystallography Volume 126 Issue 5 September ...

  1. Analogues of AVP modified in the N-terminal part of the molecule with Pip isomers: TFA-catalysed peptide bond hydrolysis

    Czech Academy of Sciences Publication Activity Database

    Sobolewski, D.; Prahl, A.; Kwiatkowska, A.; Slaninová, Jiřina; Lammek, B.

    2009-01-01

    Roč. 15, č. 3 (2009), s. 161-165 ISSN 1075-2617 Institutional research plan: CEZ:AV0Z40550506 Keywords : AVP * Pip * amide bond hydrolysis Subject RIV: CC - Organic Chemistry Impact factor: 1.807, year: 2009

  2. Poly(amic acid)s and their poly(amide imide) counterparts containing azobenzene moieties: Characterization, imidization kinetics and photochromic properties

    Energy Technology Data Exchange (ETDEWEB)

    Konieczkowska, Jolanta [Centre of Polymer and Carbon Materials, Polish Academy of Sciences, 34 M. Curie-Sklodowska Str., 41-819 Zabrze (Poland); Institute of Chemistry, University of Silesia, 9 Szkolna Str., 40-006 Katowice (Poland); Janeczek, Henryk [Centre of Polymer and Carbon Materials, Polish Academy of Sciences, 34 M. Curie-Sklodowska Str., 41-819 Zabrze (Poland); Kozanecka-Szmigiel, Anna, E-mail: annak@if.pw.edu.pl [Faculty of Physics, Warsaw University of Technology, 75 Koszykowa Str., 00-662 Warszawa (Poland); Schab-Balcerzak, Ewa, E-mail: eschab-balcerzak@cmpw-pan.edu.pl [Centre of Polymer and Carbon Materials, Polish Academy of Sciences, 34 M. Curie-Sklodowska Str., 41-819 Zabrze (Poland)

    2016-09-01

    We report on a series of novel photochromic poly(amide imide)s and their poly(amic acid) precursors bearing azobenzene chromophores as the side groups. The chemical structures of the polymers were designed so that they exhibited an enhanced thermal stability combined with a large and stable birefringence photogenerated by light of the wavelengths belonging to a wide spectral range. The polymers possessed rigidly attached azochromophores in the content of either one or two per a repeating unit, which in the latter case differed in their structures. The imidization kinetics of the poly(amic acid)s was investigated by differential scanning calorimetry and the kinetic parameters were estimated using Ozawa and Kissinger methods. Measurements of the selected physical properties of the polymers, such as solubility, supramolecular structure, linear absorption, thermal stability, glass transition and photochromic response were performed and used for determination of the structure-property relations. The measurements of photochromic properties showed a very efficient generation of optical anisotropy upon blue and violet irradiation, for both the poly(amide imide)s containing two different chromophores in the repeating unit and for their precursors. For these poly(amide imide)s and for their precursors an exceptionally slow decrease in the photoinduced optical anisotropy in the dark was also observed. - Highlights: • Three azopoly(amide imide)s were obtained from azopoly(amic acid)s. • Chosen physicochemical properties and photochromic responses were measured. • Desired optical response was found for polymers with two azo-dyes in repeating unit. • Structure-property relations were shown.

  3. Paracellular permeation-enhancing effect of AT1002 C-terminal amidation in nasal delivery

    Directory of Open Access Journals (Sweden)

    Song KH

    2015-03-01

    Full Text Available Keon-Hyoung Song,1 Sang-Bum Kim,2 Chang-Koo Shim,2 Suk-Jae Chung,2 Dae-Duk Kim,2 Sang-Ki Rhee,1 Guang J Choi,1 Chul-Hyun Kim,3 Kiyoung Kim4 1Department of Pharmaceutical Engineering, Soonchunhyang University, Asan, Republic of Korea; 2College of Pharmacy and Research Institute of Pharmaceutical Sciences, Seoul National University, Seoul, Republic of Korea; 3Department of Sports Medicine, 4Department of Medical Biotechnology, Soonchunhyang University, Asan, Republic of Korea Background: The identification of permeation enhancers has gained interest in the development of drug delivery systems. A six-mer peptide, H-FCIGRL-OH (AT1002, is a tight junction modulator with promising permeation-enhancing activity. AT1002 enhances the transport of molecular weight markers or agents with low bioavailability with no cytotoxicity. However, AT1002 is not stable in neutral pH or after incubation under physiological conditions, which is necessary to fully uncover its permeation-enhancing effect. Thus, we increased the stability or mitigated the instability of AT1002 by modifying its terminal amino acids and evaluated its subsequent biological activity.Methods: C-terminal-amidated (FCIGRL-NH2, Pep1 and N-terminal-acetylated (Ac-FCIGRL, Pep2 peptides were analyzed by liquid chromatography–mass spectrometry. We further assessed cytotoxicity on cell monolayers, as well as the permeation-enhancing activity following nasal administration of the paracellular marker mannitol.Results: Pep1 was nontoxic to cell monolayers and showed a relatively low decrease in peak area compared to AT1002. In addition, administration of mannitol with Pep1 resulted in significant increases in the area under the plasma concentration–time curve and peak plasma concentration at 3.63-fold and 2.68-fold, respectively, compared to mannitol alone. In contrast, no increase in mannitol concentration was shown with mannitol/AT1002 or mannitol/Pep2 compared to the control. Thus, Pep1 increased

  4. Interception of amide ylides with sulfonamides: synthesis of (E)-N-sulfonyl amidines catalyzed by Zn(OTf)2.

    Science.gov (United States)

    Chen, Jijun; Long, Wenhao; Fang, Shangwen; Yang, Yonggang; Wan, Xiaobing

    2017-12-12

    Through the interception of amide ylides with sulfonamides, we herein report the first general example of an intermolecular condensation reaction between sulfonamides and amides. Beyond formamides, this approach was successfully applied to a variety of lactams and linear amides, giving rise to a broad array of (E)-N-sulfonyl amidines.

  5. Coordination compounds of cobalt and cadmium with isobutyric acid amide

    Energy Technology Data Exchange (ETDEWEB)

    Tsivadze, A.Yu.; Ivanova, I.S.; Solovkina, O.A. (AN SSSR, Moscow. Inst. Obshchej i Neorganicheskoj Khimii)

    1983-06-01

    Coordination compounds of cobalt and cadmium with isobutyric acid amide (IBAA) of Co(NCS)/sub 2/x(IBAA)/sub 2/(H/sub 2/O)/sub 2/, CoCl/sub 2/(IBAA)/sub 4/, CoI/sub 2/(IBAA)/sub 8/(H/sub 2/O)/sub 2/, CdI/sub 2/(IBAA)/sub 2/ composition have been synthesized and characterized. Their infrared absorption spectra (200-400 cm/sup -1/), electron reflection spectra (200-750 nm) were studied. It is shown that in all compounds there are IBAA molecUles coordinated through an oxygen atom. Thiocyanogroups are coordinated through nitrogen atoms.

  6. Synthesis and antifungal evaluation of PCA amide analogues.

    Science.gov (United States)

    Qin, Chuan; Yu, Di-Ya; Zhou, Xu-Dong; Zhang, Min; Wu, Qing-Lai; Li, Jun-Kai

    2018-04-18

    To improve the physical and chemical properties of phenazine-1-carboxylic acid (PCA) and find higher antifungal compounds, a series of PCA amide analogues were designed and synthesized and their structures were confirmed by 1 H NMR, HRMS, and X-ray. Most compounds showed some antifungal activities in vitro. Particularly, compound 3d exhibited inhibition effect against Pyriculariaoryzac Cavgra with EC 50 value of 28.7 μM and compound 3q exhibited effect against Rhizoctonia solani with EC 50 value of 24.5 μM, more potently active than that of the positive control PCA with its EC 50 values of 37.3 μM (Pyriculariaoryzac Cavgra) and 33.2 μM (Rhizoctonia solani), respectively.

  7. Three new amides from streptomyces sp. H7372

    Energy Technology Data Exchange (ETDEWEB)

    Cheenpracha, Sarot; Borris, Robert P.; Tran, Tammy T.; Chang, Leng Chee, E-mail: lengchee@hawaii.ed [University of Hawaii Hilo, HI (United States). College of Pharmacy. Dept. of Pharmaceutical Sciences; Jee, Jap Meng; Seow, Heng Fong; Cheah, Hwen-Yee [Universiti Putra Malaysia, Selangor (Malaysia). Faculty of Medicine and Health Sciences. Department of Pathology. bImmunology Unit; Hoc, Coy Choke [University Malaysia Sabah (Malaysia). School of Science and Technology. Biotechnology Program

    2011-07-01

    Three new amides, methyl phenatate A (1), actiphenamide (2) and actiphenol 1-beta-D-glucopyranoside (3), along with thirteen known compounds, were isolated from the organic extract of a fermentation culture of Streptomyces sp. H7372. The structures were elucidated by spectroscopic methods including 1D- and 2D-NMR techniques, and MS analyses. Cycloheximide (6) and cyclo({Delta}Ala-L-Val) (8) gave a clear zone of inhibition of Ras-Raf-1 interaction in the yeast two hybrid assay which showed high potency with 10 and 25 mm clear ZOIs on SD His{sup -} and inactive on SD His{sup +} at 2.5 mug per disk, respectively. (author)

  8. Interacting Blends of Novel Unsaturated Polyester Amide Resin with Styrene

    Directory of Open Access Journals (Sweden)

    Hasmukh S. Patel

    2004-01-01

    Full Text Available Novel unsaturated poly (ester-amide resins (UPEAs were prepared by the reaction between an epoxy resin, namely diglycidyl ether of bisphenol–A (DGEBA and unsaturated aliphatic bisamic acids using a base catalyst. These UPEAs were then blended with a vinyl monomer namely, Styrene (STY. to produce a homogeneous resin syrup. The curing of these UPEAs-STY. resin blends was carried out by using benzoyl peroxide (BPO as a catalyst and was monitored by using a differential scanning calorimeter (DSC. The glass fibre reinforced composites (i.e. laminates of these UPEA-STY. resin blends were fabricated using the DSC data. The chemical, mechanical and electrical properties of the glass fibre composites have also been evaluated. The unreinforced cured samples of the UPEA-STY. resin blends were also analyzed by thermogravimetry (TGA.

  9. Proposed Chevron Tengiz venture stalls amid Soviet political squabble

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    This paper reports on the status of foreign investment in Soviet oil and gas joint ventures which has reached a critical juncture. Just as the U.S. is considering granting most favored nation trade status to the U.S.S.R., the joint venture petroleum deal seen as the litmus test for such deals-Chevron Corp.'s proposed addition of supergiant Tengiz oil field to its Caspian Sea joint venture-has stalled amid controversy. Unconfirmed reports from Soviet officials and other foreign joint venture participants in the U.S.S.R. have Chevron pulling out of the long negotiated, multibillion dollar project after the Soviets rejected the company's terms. Chevron, however, insists the project is still alive

  10. Conformational analysis of amide extractants by NMR in organic phase

    International Nuclear Information System (INIS)

    Berthon, C.

    1993-08-01

    This study deals with nuclear fuel reprocessing. We have essentially used NMR spectroscopy. We want to understand which kind of conformational parameters control selectivity and efficiency of amide extractant. The symmetric monoamides used are DOBA (C 3 H 7 CON (CH 2 CH(C 2 H 5 ) C 4 H 9 ) 2 ), DOiBA ((CH 3 ) 2 CCHON (CH 2 CH(C 2 H 5 )C 4 H 9 ) 2 ) and DOTA ((CH 3 ) 3 CCH 2 CON(CH 2 CH(C 2 H 5 )C 4 H 9 ) 2 ). Each gives two quasi equivalent conformers (cis and trans) in organic phases. The selected malonamide DMDBTDMA ((C 4 H 9 (CH 3 )NCO) 2 CHC 14 H 29 ) has four conformers because of its twice disymmetric amide functions. Weak interactions between monoamides which yield to dimer formation. The malonamide also gives dimers but forms aggregates too. Nitric acid extraction is due to the competitive formation of six species L, L 2 , L 2 (HNO 3 ), L(HNO 3 ), L(HNO 3 ) 2 , L(HNO 3 ) 3 (L: monoamide). Complexation between lanthanides (III) and monoamides yields to the stoichiometries L 3 Ln(NO 3 ) 3 and L 2 Ln(NO 3 ) 3 . Their ratio depend of steric hindrance on the carbonyl and the metal ionic radius. The same thing is observed of Pu 4+ and Th 4+ extraction in non acidic media. L 2 An(NO 3 ) 4 is the main stoichiometric except for the Th 4+ - DOBA system where the species (DOBA) 3 Th(NO 3 ) 4 appear. Exchange rates between the ligand and the complex are pointed out. The monoamide conformations obtained with lanthanide and plutonium nitrate can explain the difference in extracting power of this molecule between An 4+ and Ln 3+ . (author). 162 refs., 87 figs., 44 tabs., 7 annexes

  11. Copper wire bonding

    CERN Document Server

    Chauhan, Preeti S; Zhong, ZhaoWei; Pecht, Michael G

    2014-01-01

    This critical volume provides an in-depth presentation of copper wire bonding technologies, processes and equipment, along with the economic benefits and risks.  Due to the increasing cost of materials used to make electronic components, the electronics industry has been rapidly moving from high cost gold to significantly lower cost copper as a wire bonding material.  However, copper wire bonding has several process and reliability concerns due to its material properties.  Copper Wire Bonding book lays out the challenges involved in replacing gold with copper as a wire bond material, and includes the bonding process changes—bond force, electric flame off, current and ultrasonic energy optimization, and bonding tools and equipment changes for first and second bond formation.  In addition, the bond–pad metallurgies and the use of bare and palladium-coated copper wires on aluminum are presented, and gold, nickel and palladium surface finishes are discussed.  The book also discusses best practices and re...

  12. Probing the production of amidated peptides following genetic and dietary copper manipulations.

    Directory of Open Access Journals (Sweden)

    Ping Yin

    Full Text Available Amidated neuropeptides play essential roles throughout the nervous and endocrine systems. Mice lacking peptidylglycine α-amidating monooxygenase (PAM, the only enzyme capable of producing amidated peptides, are not viable. In the amidation reaction, the reactant (glycine-extended peptide is converted into a reaction intermediate (hydroxyglycine-extended peptide by the copper-dependent peptidylglycine-α-hydroxylating monooxygenase (PHM domain of PAM. The hydroxyglycine-extended peptide is then converted into amidated product by the peptidyl-α-hydroxyglycine α-amidating lyase (PAL domain of PAM. PHM and PAL are stitched together in vertebrates, but separated in some invertebrates such as Drosophila and Hydra. In addition to its luminal catalytic domains, PAM includes a cytosolic domain that can enter the nucleus following release from the membrane by γ-secretase. In this work, several glycine- and hydroxyglycine-extended peptides as well as amidated peptides were qualitatively and quantitatively assessed from pituitaries of wild-type mice and mice with a single copy of the Pam gene (PAM(+/- via liquid chromatography-mass spectrometry-based methods. We provide the first evidence for the presence of a peptidyl-α-hydroxyglycine in vivo, indicating that the reaction intermediate becomes free and is not handed directly from PHM to PAL in vertebrates. Wild-type mice fed a copper deficient diet and PAM(+/- mice exhibit similar behavioral deficits. While glycine-extended reaction intermediates accumulated in the PAM(+/- mice and reflected dietary copper availability, amidated products were far more prevalent under the conditions examined, suggesting that the behavioral deficits observed do not simply reflect a lack of amidated peptides.

  13. Subtle differences in the hydrogen bonding of alcohol to divalent oxygen and sulfur

    DEFF Research Database (Denmark)

    Du, Lin; Tang, Shanshan; Hansen, Anne Schou

    2017-01-01

    complexes are more stable and form stronger hydrogen bonds compared to complexes with MeOH and EtOH, which are comparable, and only for the stronger hydrogen bond donor (TFE) are the small differences in acceptor molecules highlighted. The equilibrium constant for complex formation was determined from......The Osingle bondH⋯O and Osingle bondH⋯S hydrogen bonds were investigated by gas phase FTIR spectroscopy of alcohol–dimethylether and alcohol–dimethylsulfide complexes, with alcohols of increasing hydrogen bond donor strength; methanol (MeOH), ethanol (EtOH) and 2,2,2-trifluoroethanol (TFE). The TFE...

  14. Shape Bonding method

    Science.gov (United States)

    Pontius, James T. (Inventor)

    2010-01-01

    The present invention is directed to a method of bonding at least two surfaces together. The methods step of the present invention include applying a strip of adhesive to a first surface along a predefined outer boundary of a bond area and thereby defining a remaining open area there within. A second surface, or gusset plate, is affixed onto the adhesive before the adhesive cures. The strip of adhesive is allowed to cure and then a second amount of adhesive is applied to cover the remaining open area and substantially fill a void between said first and second surfaces about said bond area. A stencil may be used to precisely apply the strip of adhesive. When the strip cures, it acts as a dam to prevent overflow of the subsequent application of adhesive to undesired areas. The method results in a precise bond area free of undesired shapes and of a preferred profile which eliminate the drawbacks of the prior art bonds.

  15. Corporate Bonds in Denmark

    DEFF Research Database (Denmark)

    Tell, Michael

    2015-01-01

    Corporate financing is the choice between capital generated by the corporation and capital from external investors. However, since the financial crisis shook the markets in 2007–2008, financing opportunities through the classical means of financing have decreased. As a result, corporations have...... to think in alternative ways such as issuing corporate bonds. A market for corporate bonds exists in countries such as Norway, Germany, France, the United Kingdom and the United States, while Denmark is still behind in this trend. Some large Danish corporations have instead used foreign corporate bonds...... markets. However, NASDAQ OMX has introduced the First North Bond Market in December 2012 and new regulatory framework came into place in 2014, which may contribute to a Danish based corporate bond market. The purpose of this article is to present the regulatory changes in Denmark in relation to corporate...

  16. Corporate Bonds in Denmark

    DEFF Research Database (Denmark)

    Tell, Michael

    2015-01-01

    Corporate financing is the choice between capital generated by the corporation and capital from external investors. However, since the financial crisis shook the markets in 2007–2008, financing opportunities through the classical means of financing have decreased. As a result, corporations have...... markets. However, NASDAQ OMX has introduced the First North Bond Market in December 2012 and new regulatory framework came into place in 2014, which may contribute to a Danish based corporate bond market. The purpose of this article is to present the regulatory changes in Denmark in relation to corporate...... bonds. The purpose is further to analyse the tax consequences of issuing bonds in both a direct issue of bonds and through securitization....

  17. Case study of hydrogen bonding in a hydrophobic cavity.

    Science.gov (United States)

    Chen, Yi-Chen; Cheng, Chao-Sheng; Tjong, Siu-Cin; Yin, Hsien-Sheng; Sue, Shih-Che

    2014-12-18

    Protein internal hydrogen bonds and hydrophobicity determine protein folding and structure stabilization, and the introduction of a hydrogen bond has been believed to represent a better interaction for consolidating protein structure. We observed an alternative example for chicken IL-1β. The native IL-1β contains a hydrogen bond between the Y157 side-chain OηH and I133 backbone CO, whereby the substitution from Tyr to Phe abolishes the connection and the mutant without the hydrogen bond is more stable. An attempt to explain the energetic view of the presence of the hydrogen bond fails when only considering the nearly identical X-ray structures. Here, we resolve the mechanism by monitoring the protein backbone dynamics and interior hydrogen bond network. IL-1β contains a hydrophobic cavity in the protein interior, and Y157 is one of the surrounding residues. The Y157 OηH group introduces an unfavorable energy in the hydrophobic cavity, therefore sequestering itself by forming a hydrogen bond with the proximate residue I133. The hydrogen bonding confines Y157 orientation but exerts a force to disrupt the hydrogen bond network surrounding the cavity. The effect propagates over the entire protein and reduces the stability, as reflected in the protein backbone dynamics observed by an NMR hydrogen-deuterium (H/D) exchange experiment. We describe the particular case in which a hydrogen bond does not necessarily confer enhanced protein stability while the disruption of hydrophobicity must be integrally considered.

  18. Metallic Thin-Film Bonding and Alloy Generation

    Science.gov (United States)

    Fryer, Jack Merrill (Inventor); Campbell, Geoff (Inventor); Peotter, Brian S. (Inventor); Droppers, Lloyd (Inventor)

    2016-01-01

    Diffusion bonding a stack of aluminum thin films is particularly challenging due to a stable aluminum oxide coating that rapidly forms on the aluminum thin films when they are exposed to atmosphere and the relatively low meting temperature of aluminum. By plating the individual aluminum thin films with a metal that does not rapidly form a stable oxide coating, the individual aluminum thin films may be readily diffusion bonded together using heat and pressure. The resulting diffusion bonded structure can be an alloy of choice through the use of a carefully selected base and plating metals. The aluminum thin films may also be etched with distinct patterns that form a microfluidic fluid flow path through the stack of aluminum thin films when diffusion bonded together.

  19. Microwave-assisted acid and base hydrolysis of intact proteins containing disulfide bonds for protein sequence analysis by mass spectrometry.

    Science.gov (United States)

    Reiz, Bela; Li, Liang

    2010-09-01

    Controlled hydrolysis of proteins to generate peptide ladders combined with mass spectrometric analysis of the resultant peptides can be used for protein sequencing. In this paper, two methods of improving the microwave-assisted protein hydrolysis process are described to enable rapid sequencing of proteins containing disulfide bonds and increase sequence coverage, respectively. It was demonstrated that proteins containing disulfide bonds could be sequenced by MS analysis by first performing hydrolysis for less than 2 min, followed by 1 h of reduction to release the peptides originally linked by disulfide bonds. It was shown that a strong base could be used as a catalyst for microwave-assisted protein hydrolysis, producing complementary sequence information to that generated by microwave-assisted acid hydrolysis. However, using either acid or base hydrolysis, amide bond breakages in small regions of the polypeptide chains of the model proteins (e.g., cytochrome c and lysozyme) were not detected. Dynamic light scattering measurement of the proteins solubilized in an acid or base indicated that protein-protein interaction or aggregation was not the cause of the failure to hydrolyze certain amide bonds. It was speculated that there were some unknown local structures that might play a role in preventing an acid or base from reacting with the peptide bonds therein. 2010 American Society for Mass Spectrometry. Published by Elsevier Inc. All rights reserved.

  20. Stable isotopes labelled compounds

    International Nuclear Information System (INIS)

    1982-09-01

    The catalogue on stable isotopes labelled compounds offers deuterium, nitrogen-15, and multiply labelled compounds. It includes: (1) conditions of sale and delivery, (2) the application of stable isotopes, (3) technical information, (4) product specifications, and (5) the complete delivery programme

  1. Stable Boundary Layer Issues

    NARCIS (Netherlands)

    Steeneveld, G.J.

    2012-01-01

    Understanding and prediction of the stable atmospheric boundary layer is a challenging task. Many physical processes are relevant in the stable boundary layer, i.e. turbulence, radiation, land surface coupling, orographic turbulent and gravity wave drag, and land surface heterogeneity. The

  2. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    IAS Admin

    After Maynard-Smith and Price [1] mathematically derived why a given behaviour or strategy was adopted by a certain proportion of the population at a given time, it was shown that a strategy which is currently stable in a population need not be stable in evolutionary time (across generations). Additionally it was sug-.

  3. Copper-mediated amidation of alkenylzirconocenes with acyl azides: formation of enamides.

    Science.gov (United States)

    Liu, Hailan; Zhou, Yiqing; Yan, Xiaoyu; Chen, Chao; Liu, Qingbin; Xi, Chanjuan

    2013-10-18

    Copper-mediated amidation of alkenylzirconocenes generated in situ from alkynes and zirconocenes with acyl azides is accomplished under mild conditions. The reaction can be used to prepare various enamides.

  4. Enantioselective synthesis of almorexant via iridium-catalysed intramolecular allylic amidation

    NARCIS (Netherlands)

    Fananas Mastral, Martin; Teichert, Johannes F.; Fernandez-Salas, Jose Antonio; Heijnen, Dorus; Feringa, Ben L.

    2013-01-01

    An enantioselective synthesis of almorexant, a potent antagonist of human orexin receptors, is presented. The chiral tetrahydroisoquinoline core structure was prepared via iridium-catalysed asymmetric intramolecular allylic amidation. Further key catalytic steps of the synthesis include an oxidative

  5. First Novozym 435 lipase-catalyzed Morita-Baylis-Hillman reaction in the presence of amides.

    Science.gov (United States)

    Tian, Xuemei; Zhang, Suoqin; Zheng, Liangyu

    2016-03-01

    The first Novozym 435 lipase-catalyzed Morita-Baylis-Hillman (MBH) reaction with amides as co-catalyst was realized. Results showed that neither Novozym 435 nor amide can independently catalyze the reaction. This co-catalytic system that used a catalytic amount of Novozym 435 with a corresponding amount of amide was established and optimized. The MBH reaction strongly depended on the structure of aldehyde substrate, amide co-catalyst, and reaction additives. The optimized reaction yield (43.4%) was achieved in the Novozym 435-catalyzed MBH reaction of 2, 4-dinitrobenzaldehyde and cyclohexenone with isonicotinamide as co-catalyst and β-cyclodextrin as additive only in 2 days. Although enantioselectivity of Novozym 435 was not found, the results were still significant because an MBH reaction using lipase as biocatalyst was realized for the first time. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Transversely Compressed Bonded Joints

    DEFF Research Database (Denmark)

    Hansen, Christian Skodborg; Schmidt, Jacob Wittrup; Stang, Henrik

    2012-01-01

    The load capacity of bonded joints can be increased if transverse pressure is applied at the interface. The transverse pressure is assumed to introduce a Coulomb-friction contribution to the cohesive law for the interface. Response and load capacity for a bonded single-lap joint was derived using...... non-linear fracture mechanics. The results indicated a good correlation between theory and tests. Furthermore, the model is suggested as theoretical base for determining load capacity of bonded anchorages with transverse pressure, in externally reinforced concrete structures....

  7. Synthesis, characterization and pharmacological evaluation of amide prodrugs of Flurbiprofen

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, Ashutosh; Veerasamy, Ravichandran; Jain, Prateek Kumar; Dixit, Vinod Kumar; Agrawal, Ram Kishor [Dr. H. S. Gour Vishwavidyalaya, Sagar (India). Dept. of Pharmaceutical Sciences. Pharmaceutical Chemistry Research Lab.]. E-mail: dragrawal2001@yahoo.co.in

    2008-07-01

    Flurbiprofen (FB) suffers from the general side effects of NSAIDs, owing to presence of free carboxylic acid group. The study was aimed to retard the adverse effects of gastrointestinal origin. Ten prodrugs of FB were synthesized by amidation with ethyl esters of amino acids, namely, glycine, L-phenylalanine, L-tryptophan, L-valine, L-isoleucine, L-alanine, L-leucine, L-glutamic acid, L-aspartic acid and {beta} alanine. Purified synthesized prodrugs were characterized by m.p., TLC, solubility, partition coefficients, elemental analyses, UV, FTIR, NMR and MS. Synthesized prodrugs were subjected for bioavailability studies, analgesic, anti-inflammatory activities and ulcerogenic index. Marked reduction of ulcerogenic index and comparable analgesic, antiinflammatory activities were obtained in all cases as compared to FB. Among synthesized prodrugs AR-9, AR-10 and AR-2 showing excellent pharmacological response and encouraging hydrolysis rate both in (Simulated Intestinal Fluid) SIF and in 80% human plasma. Prodrugs with increased aliphatic side chain length or introduction of aromatic substituent resulted in enhanced partition coefficient but diminished dissolution and hydrolysis rate. Such prodrugs can be considered for sustained release purpose. (author)

  8. Effectors of Filamentous Plant Pathogens: Commonalities amid Diversity.

    Science.gov (United States)

    Franceschetti, Marina; Maqbool, Abbas; Jiménez-Dalmaroni, Maximiliano J; Pennington, Helen G; Kamoun, Sophien; Banfield, Mark J

    2017-06-01

    Fungi and oomycetes are filamentous microorganisms that include a diversity of highly developed pathogens of plants. These are sophisticated modulators of plant processes that secrete an arsenal of effector proteins to target multiple host cell compartments and enable parasitic infection. Genome sequencing revealed complex catalogues of effectors of filamentous pathogens, with some species harboring hundreds of effector genes. Although a large fraction of these effector genes encode secreted proteins with weak or no sequence similarity to known proteins, structural studies have revealed unexpected similarities amid the diversity. This article reviews progress in our understanding of effector structure and function in light of these new insights. We conclude that there is emerging evidence for multiple pathways of evolution of effectors of filamentous plant pathogens but that some families have probably expanded from a common ancestor by duplication and diversification. Conserved folds, such as the oomycete WY and the fungal MAX domains, are not predictive of the precise function of the effectors but serve as a chassis to support protein structural integrity while providing enough plasticity for the effectors to bind different host proteins and evolve unrelated activities inside host cells. Further effector evolution and diversification arise via short linear motifs, domain integration and duplications, and oligomerization. Copyright © 2017 American Society for Microbiology.

  9. Barbier Continuous Flow Preparation and Reactions of Carbamoyllithiums for Nucleophilic Amidation.

    Science.gov (United States)

    Ganiek, Maximilian A; Becker, Matthias R; Berionni, Guillaume; Zipse, Hendrik; Knochel, Paul

    2017-08-01

    An ambient temperature continuous flow method for nucleophilic amidation and thioamidation is described. Deprotonation of formamides by lithium diisopropylamine (LDA) affords carbamoyllithium intermediates that are quenched in situ with various electrophiles such as ketones, allyl bromides, Weinreb and morpholino amides. The nature of the reactive lithium intermediates and the thermodynamics of the metalation were further investigated by ab initio calculations and kinetic experiments. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Preparation and phytotoxicity of novel kaurane diterpene amides with potential use as herbicides.

    Science.gov (United States)

    Boaventura, Maria Amélia Diamantino; Pereira, Rondinelle Gomes; de Oliveira Freitas, Luiza B; Dos Reis, Leandro Alves; da Silva Vieira, Henriete

    2008-05-14

    Novel kaurane ditepene monoamides were synthesized in good yields directly from kaurenoic ( 1) and grandiflorenic ( 2) acids and unprotected symmetrical diamines, using a modified protocol for monoacylation. Amides from 1 and 2 and monoamines were also obtained and tested against seed germination and growth of radicle and shoot of Lactuca sativa (lettuce), at 10 (-3), 10 (-5), and 10 (-7) M. Amides from symmetrical diamines showed significant inhibitory activity at higher concentrations.

  11. The synthesis of a tritium, carbon-14, and stable isotope-labeled cathepsin C inhibitors.

    Science.gov (United States)

    Allen, Paul; Bragg, Ryan A; Caffrey, Moya; Ericsson, Cecilia; Hickey, Michael J; Kingston, Lee P; Elmore, Charles S

    2017-02-01

    As part of a medicinal chemistry program aimed at developing a highly potent and selective cathepsin C inhibitor, tritium, carbon-14, and stable isotope-labeled materials were required. The synthesis of tritium-labeled methanesulfonate 5 was achieved via catalytic tritiolysis of a chloro precursor, albeit at a low radiochemical purity of 67%. Tritium-labeled AZD5248 was prepared via a 3-stage synthesis, utilizing amide-directed hydrogen isotope exchange. Carbon-14 and stable isotope-labeled AZD5248 were successfully prepared through modifications of the medicinal chemistry synthetic route, enabling the use of available labeled intermediates. Copyright © 2016 John Wiley & Sons, Ltd.

  12. Phenotypic assessment of THC discriminative stimulus properties in fatty acid amide hydrolase knockout and wildtype mice.

    Science.gov (United States)

    Walentiny, D Matthew; Vann, Robert E; Wiley, Jenny L

    2015-06-01

    A number of studies have examined the ability of the endogenous cannabinoid anandamide to elicit Δ(9)-tetrahydrocannabinol (THC)-like subjective effects, as modeled through the THC discrimination paradigm. In the present study, we compared transgenic mice lacking fatty acid amide hydrolase (FAAH), the enzyme primarily responsible for anandamide catabolism, to wildtype counterparts in a THC discrimination procedure. THC (5.6 mg/kg) served as a discriminative stimulus in both genotypes, with similar THC dose-response curves between groups. Anandamide fully substituted for THC in FAAH knockout, but not wildtype, mice. Conversely, the metabolically stable anandamide analog O-1812 fully substituted in both groups, but was more potent in knockouts. The CB1 receptor antagonist rimonabant dose-dependently attenuated THC generalization in both groups and anandamide substitution in FAAH knockouts. Pharmacological inhibition of monoacylglycerol lipase (MAGL), the primary catabolic enzyme for the endocannabinoid 2-arachidonoylglycerol (2-AG), with JZL184 resulted in full substitution for THC in FAAH knockout mice and nearly full substitution in wildtypes. Quantification of brain endocannabinoid levels revealed expected elevations in anandamide in FAAH knockout mice compared to wildtypes and equipotent dose-dependent elevations in 2-AG following JZL184 administration. Dual inhibition of FAAH and MAGL with JZL195 resulted in roughly equipotent increases in THC-appropriate responding in both groups. While the notable similarity in THC's discriminative stimulus effects across genotype suggests that the increased baseline brain anandamide levels (as seen in FAAH knockout mice) do not alter THC's subjective effects, FAAH knockout mice are more sensitive to the THC-like effects of pharmacologically induced increases in anandamide and MAGL inhibition (e.g., JZL184). Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Chemisorption bonding and catalysis

    International Nuclear Information System (INIS)

    Danese, J.B.; Schrieffer, J.R.

    1976-01-01

    The general features of the LCAO--MO, Green's function, and multiple-scattering chi α methods and their applications to surfaces and surface-related problems are discussed. Emphasis is placed on the localization of bonding in surface complexes

  14. Tile-bonding tool

    Science.gov (United States)

    Haynie, C. C.; Holt, J. W.

    1978-01-01

    Device applies uniform, constant, precise pressure to hold tiles in place during bonding. Tool consists of pressure bladders supported by adjustable pole. Pole can accomodate single or multiple bladders. Tiles can be flat or contoured.

  15. Bond markets in Africa

    Directory of Open Access Journals (Sweden)

    Yibin Mu

    2013-07-01

    Full Text Available African bond markets have been steadily growing in recent years, but nonetheless remain undeveloped. African countries would benefit from greater access to financing and deeper financial markets. This paper compiles a unique set of data on government securities and corporate bond markets in Africa. It then applies an econometric model to analyze the key determinants of African government securities market and corporate bond market capitalization. Government securities market capitalization is directly related to better institutions and interest rate volatility, and inversely related to smaller fiscal deficits, higher interest rate spreads, exchange rate volatility, and current and capital account openness. Corporate bond market capitalization is directly linked to economic size, the level of development of the economy and financial markets, better institutions, and interest rate volatility, and inversely related to higher interest rate spreads and current account openness. Policy implications follow.

  16. Handbook of wafer bonding

    CERN Document Server

    Ramm, Peter; Taklo, Maaike M V

    2011-01-01

    Written by an author and editor team from microsystems companies and industry-near research organizations, this handbook and reference presents dependable, first-hand information on bonding technologies.In the first part, researchers from companies and institutions around the world discuss the most reliable and reproducible technologies for the production of bonded wafers. The second part is devoted to current and emerging applications, including microresonators, biosensors and precise measuring devices.

  17. Diffusion bonding techniques

    International Nuclear Information System (INIS)

    Peters, R.D.

    1978-01-01

    The applications of diffusion bonding at the General Electric Neutron Devices Department are briefly discussed, with particular emphasis on the gold/gold or gold/indium joints made between metallized alumina ceramic parts in the vacuum switch tube and the crystal resonator programs. Fixtures which use the differential expansion of dissimilar metals are described and compared to one that uses hydraulic pressure to apply the necessary bonding force

  18. Normal modified stable processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole Eiler; Shephard, N.

    2002-01-01

    This paper discusses two classes of distributions, and stochastic processes derived from them: modified stable (MS) laws and normal modified stable (NMS) laws. This extends corresponding results for the generalised inverse Gaussian (GIG) and generalised hyperbolic (GH) or normal generalised inverse...... Gaussian (NGIG) laws. The wider framework thus established provides, in particular, for added flexibility in the modelling of the dynamics of financial time series, of importance especially as regards OU based stochastic volatility models for equities. In the special case of the tempered stable OU process...

  19. Applications of stable isotopes

    International Nuclear Information System (INIS)

    Letolle, R.; Mariotti, A.; Bariac, T.

    1991-06-01

    This report reviews the historical background and the properties of stable isotopes, the methods used for their measurement (mass spectrometry and others), the present technics for isotope enrichment and separation, and at last the various present and foreseeable application (in nuclear energy, physical and chemical research, materials industry and research; tracing in industrial, medical and agronomical tests; the use of natural isotope variations for environmental studies, agronomy, natural resources appraising: water, minerals, energy). Some new possibilities in the use of stable isotope are offered. A last chapter gives the present state and forecast development of stable isotope uses in France and Europe

  20. Intramolecular Hydrogen Bonding in (2-Hydroxybenzoyl)benzoylmethane Enol

    DEFF Research Database (Denmark)

    Hansen, Bjarke Knud Vilster; Winther, Morten; Spanget-Larsen, Jens

    2014-01-01

    , and the dienol form of 1,3-dibenzoylacetone. But in these examples the two H-bonds are equivalent, while in the case of OHDBM they are chemically different, involving one enolic and one phenolic hydroxy group. OHDBM is thus an interesting model compound with two competing H-bonds to the same carbonyl group......In the stable enol tautomer of the title compound (OHDBM), one carbonyl group is flanked by two β-hydroxy groups, giving rise to bifold intramolecular H-bonding. A similar situation is found in other β,β'-dihydroxy carbonyl compounds like chrysazin, anthralin, 2,2'-dihydroxybenzophenone...

  1. Time varying determinants of bond flows to emerging markets

    Directory of Open Access Journals (Sweden)

    Yasemin Erduman

    2016-06-01

    Full Text Available This paper investigates the time varying nature of the determinants of bond flows with a focus on the global financial crisis period. We estimate a time varying regression model using Bayesian estimation methods, where the posterior distribution is approximated by Gibbs sampling algorithm. Our findings suggest that the interest rate differential is the most significant pull factor of portfolio bond flows, along with the inflation rate, while the growth rate does not play a significant role. Among the push factors, global liquidity is the most important driver of bond flows. It matters the most, when unconventional monetary easing policies were first announced; and its importance as a determinant of portfolio bond flows decreases over time, starting with the Eurozone crisis, and diminishes with the tapering talk. Global risk appetite and the risk perception towards the emerging countries also have relatively small and stable significant effects on bond flows.

  2. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  3. Oxidative Reactivity and Cytotoxic Properties of a Platinum(II) Complex Prepared by Outer-Sphere Amide Bond Coupling

    Science.gov (United States)

    Wilson, Justin J.; Lippard, Stephen J.

    2012-01-01

    Benzyl amine was coupled to the dangling carboxylic acid groups of the platinum(II) complex [Pt(edda)Cl2], where edda = ethylenediamine-N,N’-diacetic acid, to give the diamidetethered complex [Pt(L)Cl2] (1), where L = ethylenediamine-N,N’-bis(N-benzylacetamide). Complex 1 was oxidized with both PhICl2 and Br2. Oxidation with PhICl2 cleanly afforded the tetrachloride complex, [Pt(L)Cl4] (2), whereas oxidation with Br2 gave rise to several mixed halide complexes of the general formula, [Pt(L)ClxBr4-x], where x = 1, 2, or 3. Complexes 1 and 2 were fully characterized by 1H, 13C, and 195Pt NMR spectroscopy, as well as by ESI-MS. These compounds exist as a mixture of diastereomers that arise from the chirality of the two coordinated nitrogen atoms. Crystal structures of 1, 2, and [Pt(L)ClxBry] (3) are reported. Although refined as the tetrabromide complex [Pt(L)Br4], the crystal structure of 3 is a mixture of species with site-occupancy disorder of chloride and bromide ligands. DFT calculations indicate that the two sets of diastereomers of 1 and 2 are effectively thermoneutral, a conclusion that is also supported by the observation of both members of each pair by NMR spectroscopy. The cytotoxicity of 1 and 2 was measured by the MTT assay in HeLa cells and compared to that of cisplatin. Both exhibit IC50 values close to 50 μM and are therefore substantially less toxic than cisplatin, for which the IC50 is 1 μM. PMID:24489429

  4. Epigenetic regulation of fatty acid amide hydrolase in Alzheimer disease.

    Directory of Open Access Journals (Sweden)

    Claudio D'Addario

    Full Text Available OBJECTIVE: Alzheimer disease (AD is a progressive, degenerative and irreversible neurological disorder with few therapies available. In search for new potential targets, increasing evidence suggests a role for the endocannabinoid system (ECS in the regulation of neurodegenerative processes. METHODS: We have studied the gene expression status and the epigenetic regulation of ECS components in peripheral blood mononuclear cells (PBMCs of subjects with late-onset AD (LOAD and age-matched controls (CT. RESULTS: We found an increase in fatty acid amide hydrolase (faah gene expression in LOAD subjects (2.30 ± 0.48 when compared to CT (1.00 ± 0.14; *p<0.05 and no changes in the mRNA levels of any other gene of ECS elements. Consistently, we also observed in LOAD subjects an increase in FAAH protein levels (CT: 0.75 ± 0.04; LOAD: 1.11 ± 0.15; *p<0.05 and activity (pmol/min per mg protein CT: 103.80 ± 8.73; LOAD: 125.10 ± 4.00; *p<0.05, as well as a reduction in DNA methylation at faah gene promoter (CT: 55.90 ± 4.60%; LOAD: 41.20 ± 4.90%; *p<0.05. CONCLUSIONS: Present findings suggest the involvement of FAAH in the pathogenesis of AD, highlighting the importance of epigenetic mechanisms in enzyme regulation; they also point to FAAH as a new potential biomarker for AD in easily accessible peripheral cells.

  5. Fundamentals of fiber bonding in thermally point-bonded nonwovens

    Science.gov (United States)

    Chidambaram, Aparna

    Thermal point bonding (TPB) uses heat and pressure to bond a web of fibers at discrete points imparting strength to the manufactured fabric. This process significantly reduces the strength and elongation of the bridging fibers between bond points while strengthening the web. Single fiber experiments were performed with four structurally different polypropylene fibers to analyze the inter-relationships between fiber structure, fiber properties and bonding process. Two fiber types had a low birefringence sheath or surface layer while the remaining had uniform birefringence profiles through their thickness. Bonds were formed between isolated pairs of fibers by subjecting the fibers to a calendering process and simulating TPB process conditions. The dependence of bond strength on bonding temperature and on the type of fiber used was evaluated. Fiber strengths before and after bonding were measured and compared to understand the effect of bonding on fiber strength. Additionally, bonded fiber strength was compared to the strength of single fibers which had experienced the same process conditions as the bonded pairs. This comparison estimated the effect of mechanical damage from pressing fibers together with steel rolls while creating bonds in TPB. Interfiber bond strength increased with bonding temperature for all fiber types. Fiber strength decreased with increasing bonding temperature for all fiber types except for one type of low birefringent sheath fibers. Fiber strength degradation was unavoidable at temperatures required for successful bonding. Mechanical damage from compression of fibers between rolls was an insignificant factor in this strength loss. Thermal damage during bonding was the sole significant contributor to fiber strength degradation. Fibers with low birefringence skins formed strong bonds with minimal fiber strength loss and were superior to fibers without such surface layers in TPB performance. A simple model to predict the behavior of a two-bond

  6. The π-Tetrel Bond and its Influence on Hydrogen Bonding and Proton Transfer.

    Science.gov (United States)

    Wei, Yuanxin; Li, Qingzhong; Scheiner, Steve

    2017-12-01

    The positive region that lies above the plane of F 2 TO (T=C and Si) interacts with malondialdehyde (MDA), which contains an intramolecular H-bond. The T atom of F 2 TO can lie either in the MDA molecular plane, forming a T⋅⋅⋅O tetrel bond, or F 2 TO can stack directly above MDA in a parallel arrangement. The former structure is more stable than the latter, and in either case, F 2 SiO engages in a much stronger interaction than does F 2 CO, reaching nearly 200 kJ mol -1 . The π-tetrel bond strengthens/weakens the MDA H-bond when the bond is formed to the hydroxyl/carbonyl group of MDA, and causes an accompanying inhibition/promotion of proton transfer within this H-bond; this effect is stronger for F 2 SiO. These same aspects can be tuned by substituents placed on any of the C atoms of MDA, although their effects are not fully correlated with the electron-withdrawing or electron-releasing properties of the substituent. A new type of π-π tetrel bond occurs when the π-hole on the T atom of F 2 TO approaches the middle carbon atom of MDA from above, and a similar configuration is also found between F 2 TO and benzene. Evidence for extensive C⋅⋅⋅C π-π tetrel bonding in crystal materials is presented. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Pb(II)-promoted amide cleavage: mechanistic comparison to a Zn(II) analogue.

    Science.gov (United States)

    Elton, Eric S; Zhang, Tingting; Prabhakar, Rajeev; Arif, Atta M; Berreau, Lisa M

    2013-10-07

    Two new Pb(II) complexes of the amide-appended nitrogen/sulfur epppa (N-((2-ethylthio)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine) chelate ligand, [(epppa)Pb(NO3)2] (4-NO3) and [(epppa)Pb(ClO4)2] (4-ClO4), were prepared and characterized. In the solid state, 4-NO3 exhibits κ(5)-epppa chelate ligand coordination as well as the coordination of two bidentate nitrate ions. In acetonitrile, 4-NO3 is a 1:1 electrolyte with a coordinated NO3(-), whereas 4-ClO4 is a 1:2 electrolyte. Treatment of 4-ClO4 with 1 equiv Me4NOH·5H2O in CH3CN:CH3OH (3:5) results in amide methanolysis in a reaction that is akin to that previously reported for the Zn(II) analogue [(epppa)Zn](ClO4)2 (3-ClO4). (1)H NMR kinetic studies of the amide methanolysis reactions of 4-ClO4 and 3-ClO4 as a function of temperature revealed free energies of activation of 21.3 and 24.5 kcal/mol, respectively. The amide methanolysis reactions of 4-ClO4 and 3-ClO4 differ in terms of the effect of the concentration of methanol (saturation kinetics for 4-ClO4; second-order behavior for 3-ClO4), the observation of a small solvent kinetic isotope effect (SKIE) only for the reaction of the Zn(II)-containing 3-ClO4, and the properties of an initial intermediate isolated from each reaction upon treatment with Me4NOH·5H2O. These experimental results, combined with computational studies of the amide methanolysis reaction pathways of 4-ClO4 and 3-ClO4, indicate that the Zn(II)-containing 3-ClO4 initially undergoes amide deprotonation upon treatment with Me4NOH·5H2O. Subsequent amide protonation from coordinated methanol yields a structure containing a coordinated neutral amide and methoxide anion from which amide cleavage can then proceed. The rate-determining step in this pathway is either amide protonation or protonation of the leaving group. The Pb(II)-containing 4-ClO4 instead directly forms a neutral amide-containing, epppa-ligated Pb(II)-OH/Pb(II)-OCH3 equilibrium mixture upon treatment

  8. 46 CFR Sec. 10 - Bonds.

    Science.gov (United States)

    2010-10-01

    ... open penalty type. (e) No repair voucher (progress or final) where bond coverage is required shall be... awarded work and the furnishing of the performance and payment bonds required by Article 14 of the NSA...) shall be used. (b) In compliance with the perform- ance bond and payment bond requirements of Article 14...

  9. Hydrothermally stable molecular separation membranes from organically linked silica

    NARCIS (Netherlands)

    Castricum, H.L.; Ashima sah, A.S.; Kreiter, Robert; Blank, David H.A.; Vente, Jaap F.; ten Elshof, Johan E.

    2008-01-01

    A highly hydrothermally stable microporous network material has been developed that can be applied in energy-efficient molecular sieving. The material was synthesized by employing organically bridged monomers in acid-catalysed sol–gel hydrolysis and condensation, and is composed of covalently bonded

  10. Hydrothermally stable molecular separation membranes from organically linked silica

    NARCIS (Netherlands)

    Castricum, H.L.; Sah, A.; Kreiter, R.; Blank, D.H.A.; Vente, J.F.; ten Elshof, J.E.

    2008-01-01

    A highly hydrothermally stable microporous network material has been developed that can be applied in energy-efficient molecular sieving. The material was synthesized by employing organically bridged monomers in acid-catalysed sol-gel hydrolysis and condensation, and is composed of covalently bonded

  11. Synthesis, Antifungal Activity and Structure-Activity Relationships of Novel 3-(Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic Acid Amides

    Directory of Open Access Journals (Sweden)

    Shijie Du

    2015-05-01

    Full Text Available A series of novel 3-(difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid amides were synthesized and their activities were tested against seven phytopathogenic fungi by an in vitro mycelia growth inhibition assay. Most of them displayed moderate to excellent activities. Among them N-(2-(5-bromo-1H-indazol-1-ylphenyl-3-(difluoro-methyl-1-methyl-1H-pyrazole-4-carboxamide (9m exhibited higher antifungal activity against the seven phytopathogenic fungi than boscalid. Topomer CoMFA was employed to develop a three-dimensional quantitative structure-activity relationship model for the compounds. In molecular docking, the carbonyl oxygen atom of 9m could form hydrogen bonds towards the hydroxyl of TYR58 and TRP173 on SDH.

  12. Tug-of-war between classical and multicenter bonds in H-(Be)n-H species

    Science.gov (United States)

    Lundell, Katie A.; Boldyrev, Alexander I.

    2018-05-01

    Quantum chemical calculations were performed for beryllium homocatenated compounds [H-(Be)n-H]. Global minimum structures were found using machine searches (Coalescence Kick method) with density functional theory. Chemical bonding analysis was performed with the Adaptive Natural Density Partitioning method. It was found that H-(Be)2-H and H-(Be)3-H clusters are linear with classical two-center two-electron bonds, while for n > 3, three-dimensional structures are more stable with multicenter bonding. Thus, at n = 4, multicenter bonding wins the tug-of-war vs. the classical bonding.

  13. A light-up fluorescent probe for citrate detection based on bispyridinum amides with aggregation-induced emission feature.

    Science.gov (United States)

    Liu, Chenchen; Hang, Yandi; Jiang, Tao; Yang, Ji; Zhang, Xiao; Hua, Jianli

    2018-02-01

    Citrate is an important intermediate in the citric acid cycle, a vital metabolic pathway for animals, plants and bacteria. It is of great significance to detect its levels in human beings because several diseases may cause the abnormal of citrate. In this paper, a new turn-on fluorescent sensor (TPE-Py) using the classic tetraphenylethylene (TPE) as the aggregation-induced emission (AIE) fluorophore and bipyridinium-based amides as the recognition receptor has been synthesized for the detection of citrate. The probe exhibits good selectivity and sensitivity to citrate with a relatively low detection limit (1.0 × 10 -7 M). The enhancement of the fluorescence is relevant with the AIE property based on the complexation of TPE-Py with citrate caused by the hydrogen bonding and electrostatic interactions between the bipyridinium diamides and citrate, which has been proved by 1 H NMR and mass spectra titration, scanning electronic microscope and dynamic light scattering analyses. More importantly, the quantification of citrate in artificial urine may develop TPE-Py fluorometric probe for the citrate detection in real biosystems. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Vibrational Spectroscopy and Gas-Phase Thermochemistry of the Model Dipeptide N-Acetyl Glycine Methyl Amide

    Science.gov (United States)

    Leavitt, Christopher; Raston, Paul; Moody, Grant; Shirley, Caitlyne; Douberly, Gary

    2014-06-01

    The structure-function relationship in proteins is widely recognized, motivating numerous investigations of isolated neutral and ionic polypeptides that generally employ conformation specific, multidimensional UV and IR spectroscopies. This data taken in conjunction with computed harmonic frequencies has provided a snapshot of the underlying molecular physics at play in many polypeptides, but few experiments have been able to probe the energetics of these systems. In this study, we use vibrational spectroscopy to measure the gas-phase enthalpy change for isomerization between two conformations of the dipeptide N-acetyl glycine methyl amide (NAGMA). A two-stage oven source is implemented producing a gas-phase equilibrium distribution of NAGMA molecules that is flash frozen upon pickup by He nanodroplets. Using polarization spectroscopy, the IR spectrum is assigned to a mixture of two conformers having intramolecular hydrogen bonds made up of either five- or seven-membered rings, C5 and C7, respectively. The interconversion enthalpy, obtained from the van't Hoff relation, is 4.52{±}0.12 kJ/mol for isomerization from the C7 to the C5-conformer. This experimental measurement is compared to computations employing a broad range of theoretical methods.

  15. Combined experimental and computational studies on the physical and chemical properties of the renewable amide, 3-acetamido-5-acetylfuran.

    Science.gov (United States)

    Liu, Yi; Rowley, Christopher N; Kerton, Francesca M

    2014-12-15

    The pK(a) of 3-acetamido-5-acetylfuran (3A5AF) was predicted to be in the range 18.5-21.5 by using the B3LYP/6-311+G(2d,p) method and several amides as references. The experimental pK(a) value, 20.7, was determined through UV/Vis titrations. Its solubility was measured in methanol-modified supercritical CO2 (mole fraction, 3.23×10(-4), cloud points 40-80 °C) and it was shown to be less soluble than 5-hydroxymethylfurfural (5-HMF). Dimerization energies were calculated for 3A5AF and 5-HMF to compare hydrogen bonding, as such interactions will affect their solubility. Infrared and (1) H nuclear magnetic resonance spectra of 3A5AF samples support the existence of intermolecular hydrogen bonding. The highest occupied molecular orbital, lowest unoccupied molecular orbital, and electrostatic potential of 3A5AF were determined through molecular orbital calculations using B3LYP/6-311+G(2d,p). The π-π* transition energy (time-dependent density functional theory study) was compared with UV/Vis data. Calculated atomic charges were used in an attempt to predict the reactivity of 3A5AF. A reaction between 3A5AF and CH3MgBr was conducted. As 3A5AF is a recently developed renewable compound that has previously not been studied extensively, these studies will be helpful in designing future reactions and processes involving this molecule. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Oxytocin promotes social bonding in dogs.

    Science.gov (United States)

    Romero, Teresa; Nagasawa, Miho; Mogi, Kazutaka; Hasegawa, Toshikazu; Kikusui, Takefumi

    2014-06-24

    Recent evidence suggests that enduring social bonds have fitness benefits. However, very little is known about the neural circuitry and neurochemistry underlying the formation and maintenance of stable social bonds outside reproductive contexts. Oxytocin (OT), a neuropeptide synthetized by the hypothalamus in mammals, regulates many complex forms of social behavior and cognition in both human and nonhuman animals. Animal research, however, has concentrated on monogamous mammals, and it remains unknown whether OT also modulates social bonds in nonreproductive contexts. In this study we provide behavioral evidence that exogenous OT promotes positive social behaviors in the domestic dog toward not only conspecifics but also human partners. Specifically, when sprayed with OT, dogs showed higher social orientation and affiliation toward their owners and higher affiliation and approach behaviors toward dog partners than when sprayed with placebo. Additionally, the exchange of socio-positive behaviors with dog partners triggered the release of endogenous OT, highlighting the involvement of OT in the development of social relationships in the domestic dog. These data provide new insight into the mechanisms that facilitate the maintenance of close social bonds beyond immediate reproductive interest or genetic ties and complement a growing body of evidence that identifies OT as one of the neurochemical foundations of sociality in mammalian species.

  17. Crystal structure of an unknown solvate of {2,2'-[ethane-1,2-diylbis(nitrilo-methanylyl-idene)]diphenolato-κ(4) O,N,N',O'}(N-ferrocenylisonicotinamide-κN (1))cobalt(II): a Co(II)-salen complex that forms hydrogen-bonded dimers.

    Science.gov (United States)

    Brautigam, Bryan; Herholdt, Chelsea; Farnsworth, William; Brudi, Ellen; McDonald, Eric; Wu, Guang; Contakes, Stephen

    2015-09-01

    The title compound, [CoFe(C5H5)(C16H14N2O2)(C11H9N2O)], was prepared as an air-stable red-brown solid by mixing equimolar amounts of {2,2'-[ethane-1,2-diylbis(nitrilo-methanylyl-idene)]diphenolato}cobalt(II) and N-ferrocenylisonicotinamide in dry di-chloro-methane under nitro-gen and was characterized by ESI-MS, IR, and single-crystal X-ray diffraction. The structure at 100 K has triclinic (P-1) symmetry and indicates that the complex crystallizes as a mixture of λ and δ conformers. It exhibits the expected square pyramidal geometry about Co, and forms hydrogen-bonded dimers through amide N-H groups and phenolate O atoms on an adjacent mol-ecule. The involvement of only half of the salen ring structure in hydrogen-bonding inter-actions results in slight folding of the salen ring away from the pyridine coordination site in the δ conformer with an inter-salicyl-idene fold angle of 9.9 (7)°. In contrast, the λ conformer is nearly planar. The dimers pack into an open structure containing channels filled with highly disordered solvent mol-ecules. These solvent molecules' contributions to the intensity data were removed with the SQUEEZE procedure [Spek (2015). Acta Cryst. C71, 9-18] available in PLATON.

  18. Stable configurations of graphene on silicon

    Energy Technology Data Exchange (ETDEWEB)

    Javvaji, Brahmanandam; Shenoy, Bhamy Maithry [Department of Aerospace Engineering, Indian Institute of Science, Bangalore 560012 (India); Mahapatra, D. Roy, E-mail: droymahapatra@aero.iisc.ernet.in [Department of Aerospace Engineering, Indian Institute of Science, Bangalore 560012 (India); Ravikumar, Abhilash [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal 575025 (India); Hegde, G.M. [Center for Nano Science and Engineering, Indian Institute of Science, Bangalore 560012 (India); Rizwan, M.R. [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal 575025 (India)

    2017-08-31

    Highlights: • Simulations of epitaxial growth process for silicon–graphene system is performed. • Identified the most favourable orientation of graphene sheet on silicon substrate. • Atomic local strain due to the silicon–carbon bond formation is analyzed. - Abstract: Integration of graphene on silicon-based nanostructures is crucial in advancing graphene based nanoelectronic device technologies. The present paper provides a new insight on the combined effect of graphene structure and silicon (001) substrate on their two-dimensional anisotropic interface. Molecular dynamics simulations involving the sub-nanoscale interface reveal a most favourable set of temperature independent orientations of the monolayer graphene sheet with an angle of ∽15° between its armchair direction and [010] axis of the silicon substrate. While computing the favorable stable orientations, both the translation and the rotational vibrations of graphene are included. The possible interactions between the graphene atoms and the silicon atoms are identified from their coordination. Graphene sheet shows maximum bonding density with bond length 0.195 nm and minimum bond energy when interfaced with silicon substrate at 15° orientation. Local deformation analysis reveals probability distribution with maximum strain levels of 0.134, 0.047 and 0.029 for 900 K, 300 K and 100 K, respectively in silicon surface for 15° oriented graphene whereas the maximum probable strain in graphene is about 0.041 irrespective of temperature. Silicon–silicon dimer formation is changed due to silicon–carbon bonding. These results may help further in band structure engineering of silicon–graphene lattice.

  19. METABOLIC ENGINEERING TO DEVELOP A PATHWAY FOR THE SELECTIVE CLEAVAGE OF CARBON-NITROGEN BONDS

    Energy Technology Data Exchange (ETDEWEB)

    John J. Kilbane III

    2003-12-01

    The objective of the project is to develop biochemical pathways for the selective cleavage of C-N bonds in molecules found in petroleum. The initial phase of the project will focus on the isolation or development of an enzyme capable of cleaving the C-N bond in aromatic amides, specifically 2-aminobiphenyl. The objective of the second phase of the research will be to construct a biochemical pathway for the selective removal of nitrogen from carbazole by combining the carA genes from Sphingomonas sp. GTIN11 with the gene(s) encoding an appropriate amidase. The objective of the final phase of the project will be to develop derivative CN bond cleaving enzymes that have broader substrate ranges and to demonstrate the use of such strains to selectively remove nitrogen from petroleum. The project is on schedule and no major difficulties have been encountered. During the first year of the project (October, 2002-September, 2003) enrichment culture experiments have resulted in the isolation of promising cultures that may be capable of cleaving C-N bonds in aromatic amides, several amidase genes have been cloned and are currently undergoing directed evolution to obtain derivatives that can cleave C-N bonds in aromatic amides, and the carA genes from Sphingomonas sp. GTIN11, and Pseudomonas resinovorans CA10 were cloned in vectors capable of replicating in Escherichia coli. Future research will address expression of these genes in Rhodococcus erythropolis. Enrichment culture experiments and directed evolution experiments continue to be a main focus of research activity and further work is required to obtain an appropriate amidase that will selectively cleave C-N bonds in aromatic substrates. Once an appropriate amidase gene is obtained it must be combined with genes encoding an enzyme capable of converting carbazole to 2'aminobiphenyl-2,3-diol: specifically carA genes. The carA genes from two sources have been cloned and are ready for construction of C-N bond cleavage

  20. Binding of the Respiratory Chain Inhibitor Antimycin to theMitochondrial bc1 Complex: A New Crystal Structure Reveals an AlteredIntramolecular Hydrogen-Bonding Pattern

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Li-shar; Cobessi, David; Tung, Eric Y.; Berry, Edward A.

    2005-05-10

    Antimycin A (antimycin), one of the first known and most potent inhibitors of the mitochondrial respiratory chain, binds to the quinone reduction site of the cytochrome bc1 complex.Structure-activity-relationship studies have shown that the N-formylamino-salicyl-amide group is responsible for most of the binding specificity, and suggested that a low pKa for the phenolic OH group and an intramolecular H-bond between that OH and the carbonyl O of the salicylamide linkage are important. Two previous X-ray structures of antimycin bound to vertebrate bc1 complex gave conflicting results. A new structure reported here of the bovine mitochondrial bc1 complex at 2.28Angstrom resolution with antimycin bound, allows us for the first time to reliably describe the binding of antimycin and shows that the intramolecular hydrogen bond described in solution and in the small-molecule structure is replaced by one involving the NH rather than carbonyl O of the amide linkage, with rotation of the amide group relative to the aromatic ring. The phenolic OH and formylamino N form H-bonds with conserved Asp228 of cyt b, and the formylamino O H-bonds via a water molecule to Lys227. A strong density the right size and shape for a diatomic molecule is found between the other side of the dilactone ring and the alpha-A helix.

  1. Binding of the respiratory chain inhibitor antimycin to the mitochondrial bc1 complex: a new crystal structure reveals an altered intramolecular hydrogen-bonding pattern.

    Science.gov (United States)

    Huang, Li-Shar; Cobessi, David; Tung, Eric Y; Berry, Edward A

    2005-08-19

    Antimycin A (antimycin), one of the first known and most potent inhibitors of the mitochondrial respiratory chain, binds to the quinone reduction site of the cytochrome bc1 complex. Structure-activity relationship studies have shown that the N-formylamino-salicyl-amide group is responsible for most of the binding specificity, and suggested that a low pKa for the phenolic OH group and an intramolecular H-bond between that OH and the carbonyl O of the salicylamide linkage are important. Two previous X-ray structures of antimycin bound to vertebrate bc1 complex gave conflicting results. A new structure reported here of the bovine mitochondrial bc1 complex at 2.28 A resolution with antimycin bound, allows us for the first time to reliably describe the binding of antimycin and shows that the intramolecular hydrogen bond described in solution and in the small-molecule structure is replaced by one involving the NH rather than carbonyl O of the amide linkage, with rotation of the amide group relative to the aromatic ring. The phenolic OH and formylamino N form H-bonds with conserved Asp228 of cytochrome b, and the formylamino O H-bonds via a water molecule to Lys227. A strong density, the right size and shape for a diatomic molecule is found between the other side of the dilactone ring and the alphaA helix.

  2. Hydrogen bonded supramolecular materials

    CERN Document Server

    Li, Zhan-Ting

    2015-01-01

    This book is an up-to-date text covering topics in utilizing hydrogen bonding for constructing functional architectures and supramolecular materials. The first chapter addresses the control of photo-induced electron and energy transfer. The second chapter summarizes the formation of nano-porous materials. The following two chapters introduce self-assembled gels, many of which exhibit unique functions. Other chapters cover the advances in supramolecular liquid crystals and the versatility of hydrogen bonding in tuning/improving the properties and performance of materials. This book is designed

  3. Calcium stable isotope geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gausonne, Nikolaus [Muenster Univ. (Germany). Inst. fuer Mineralogie; Schmitt, Anne-Desiree [Strasbourg Univ. (France). LHyGeS/EOST; Heuser, Alexander [Bonn Univ. (Germany). Steinmann-Inst. fuer Geologie, Mineralogie und Palaeontologie; Wombacher, Frank [Koeln Univ. (Germany). Inst. fuer Geologie und Mineralogie; Dietzel, Martin [Technische Univ. Graz (Austria). Inst. fuer Angewandte Geowissenschaften; Tipper, Edward [Cambridge Univ. (United Kingdom). Dept. of Earth Sciences; Schiller, Martin [Copenhagen Univ. (Denmark). Natural History Museum of Denmark

    2016-08-01

    This book provides an overview of the fundamentals and reference values for Ca stable isotope research, as well as current analytical methodologies including detailed instructions for sample preparation and isotope analysis. As such, it introduces readers to the different fields of application, including low-temperature mineral precipitation and biomineralisation, Earth surface processes and global cycling, high-temperature processes and cosmochemistry, and lastly human studies and biomedical applications. The current state of the art in these major areas is discussed, and open questions and possible future directions are identified. In terms of its depth and coverage, the current work extends and complements the previous reviews of Ca stable isotope geochemistry, addressing the needs of graduate students and advanced researchers who want to familiarize themselves with Ca stable isotope research.

  4. Quintuple super bonding between the superatoms of metallic clusters.

    Science.gov (United States)

    Wang, Haiyan; Cheng, Longjiu

    2017-09-14

    The synthesis of a stable compound with Cr-Cr quintuple bonding (σ, 2π, 2δ) opened the door to a new field of chemistry (T. Nguyen, A. D. Sutton, M. Brynda, J. C. Fettinger, G. J. Long and P. P. Power, Science, 2005, 310, 844). Looking back to the mass experiments on sodium clusters (W. D. Knight, K. Clemenger, W. A. de Heer, W. A. Saunders, M. Y. Chou and M. L. Cohen, Phys. Rev. Lett., 1984, 52, 2141), this work tells some new stories about the experimentally viewed magic numbers 26e and 30e. By unbiased global search, the 26e Li 20 Mg 3 cluster has a perfect double-icosahedral motif with a large HOMO-LUMO energy gap (1.44 eV). We theoretically found that each icosahedron is an independent superatom and molecule-like electronic shell-closure is achieved via quintuple super bonding between two superatoms: [8e](1D2S) 5 -(1D2S) 5 [8e]. Similar quintuple bonding also exists in the 30e double-icosahedral Li 18 Mg 3 Al 2 cluster: [8e](1D2S) 7 -(1D2S) 7 [8e]. The 26e/30e quintuple bonding was verified by the beautiful analogies in molecular orbital diagrams and chemical bonding patterns with V 2 /Re 2 molecules. Such a quintuple super bonding makes a bridge between the jellium model and chemical bonding, which further expands the community of chemical bonds.

  5. The coevolution of long-term pair bonds and cooperation.

    Science.gov (United States)

    Song, Z; Feldman, M W

    2013-05-01

    The evolution of social traits may not only depend on but also change the social structure of the population. In particular, the evolution of pairwise cooperation, such as biparental care, depends on the pair-matching distribution of the population, and the latter often emerges as a collective outcome of individual pair-bonding traits, which are also under selection. Here, we develop an analytical model and individual-based simulations to study the coevolution of long-term pair bonds and cooperation in parental care, where partners play a Snowdrift game in each breeding season. We illustrate that long-term pair bonds may coevolve with cooperation when bonding cost is below a threshold. As long-term pair bonds lead to assortative interactions through pair-matching dynamics, they may promote the prevalence of cooperation. In addition to the pay-off matrix of a single game, the evolutionarily stable equilibrium also depends on bonding cost and accidental divorce rate, and it is determined by a form of balancing selection because the benefit from pair-bond maintenance diminishes as the frequency of cooperators increases. Our findings highlight the importance of ecological factors affecting social bonding cost and stability in understanding the coevolution of social behaviour and social structures, which may lead to the diversity of biological social systems. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

  6. Formation of a hydrogen-bonded barbiturate [2]-rotaxane.

    Science.gov (United States)

    Tron, Arnaud; Thornton, Peter J; Rocher, Mathias; Jacquot de Rouville, Henri-Pierre; Desvergne, Jean-Pierre; Kauffmann, Brice; Buffeteau, Thierry; Cavagnat, Dominique; Tucker, James H R; McClenaghan, Nathan D

    2014-03-07

    Interlocked structures containing the classic Hamilton barbiturate binding motif comprising two 2,6-diamidopyridine units are reported for the first time. Stable [2]-rotaxanes can be accessed either through hydrogen-bonded preorganization by a barbiturate thread followed by a Cu(+)-catalyzed "click" stoppering reaction or by a Cu(2+)-mediated Glaser homocoupling reaction.

  7. Cytotoxicity of dentin bonding agents.

    Science.gov (United States)

    Cal, Ebru; Guneri, Pelin; Atay, Ayse; Cetintas, Vildan Bozok

    2014-01-01

    This study sought to evaluate the cytotoxicity of 5 dentin bonding agents (Admira Bond, Adper Single Bond Plus, Clearfil SE Bond, Clearfil S3 Bond, and Heliobond) by XTT assay using human gingival fibroblast cells. Samples of dentin bonding agents were prepared on a black 96-well microplate, and the cytotoxicity of each bonding material was measured every 24 hours for 7 days, then on Days 14, 21, and 28. One-way ANOVA and Bonferroni post hoc tests were used for statistical analyses. All 5 materials were evaluated as severely cytotoxic (P agents showed severe cytotoxicity with viability results exception of Adper Single Bond Plus, toxicity continued to Day 28 for all compounds. The utmost care must be considered during the clinical utilization of dentin bonding agents to keep them within the area of restoration and prevent their contact with adjacent tissues.

  8. Photochemical tissue bonding

    Science.gov (United States)

    Redmond, Robert W [Brookline, MA; Kochevar, Irene E [Charlestown, MA

    2012-01-10

    Photochemical tissue bonding methods include the application of a photosensitizer to a tissue and/or tissue graft, followed by irradiation with electromagnetic energy to produce a tissue seal. The methods are useful for tissue adhesion, such as in wound closure, tissue grafting, skin grafting, musculoskeletal tissue repair, ligament or tendon repair and corneal repair.

  9. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... Home; Journals; Resonance – Journal of Science Education; Volume 21; Issue 9. Evolutionary Stable Strategy: Application of Nash Equilibrium in Biology. General ... Using some examples of classical games, we show how evolutionary game theory can help understand behavioural decisions of animals.

  10. The Stable Concordance Genus

    OpenAIRE

    Kearney, M. Kate

    2013-01-01

    The concordance genus of a knot is the least genus of any knot in its concordance class. Although difficult to compute, it is a useful invariant that highlights the distinction between the three-genus and four-genus. In this paper we define and discuss the stable concordance genus of a knot, which describes the behavior of the concordance genus under connected sum.

  11. Manifolds admitting stable forms

    Czech Academy of Sciences Publication Activity Database

    Le, Hong-Van; Panák, Martin; Vanžura, Jiří

    2008-01-01

    Roč. 49, č. 1 (2008), s. 101-11 ISSN 0010-2628 R&D Projects: GA ČR(CZ) GP201/05/P088 Institutional research plan: CEZ:AV0Z10190503 Keywords : stable forms * automorphism groups Subject RIV: BA - General Mathematics

  12. Stable isotope studies

    International Nuclear Information System (INIS)

    Ishida, T.

    1992-01-01

    The research has been in four general areas: (1) correlation of isotope effects with molecular forces and molecular structures, (2) correlation of zero-point energy and its isotope effects with molecular structure and molecular forces, (3) vapor pressure isotope effects, and (4) fractionation of stable isotopes. 73 refs, 38 figs, 29 tabs

  13. Interactive Stable Ray Tracing

    DEFF Research Database (Denmark)

    Dal Corso, Alessandro; Salvi, Marco; Kolb, Craig

    2017-01-01

    Interactive ray tracing applications running on commodity hardware can suffer from objectionable temporal artifacts due to a low sample count. We introduce stable ray tracing, a technique that improves temporal stability without the over-blurring and ghosting artifacts typical of temporal post-pr...

  14. The stable subgroup graph

    Directory of Open Access Journals (Sweden)

    Behnaz Tolue

    2018-07-01

    Full Text Available In this paper we introduce stable subgroup graph associated to the group $G$. It is a graph with vertex set all subgroups of $G$ and two distinct subgroups $H_1$ and $H_2$ are adjacent if $St_{G}(H_1\\cap H_2\

  15. The Synthesis of Backbone Thermo and pH Responsive Hyperbranched Poly(Bis(N,N-Propyl Acryl Amides by RAFT

    Directory of Open Access Journals (Sweden)

    Shijiao Zhou

    2016-04-01

    Full Text Available Hyperbranched poly(methylene-bis-acrylamide, poly(bis(N,N-propyl acryl amide (HPNPAM and poly(bis(N,N-butyl acryl amide were synthesized by reversible addition-fragmentation chain transfer polymerization. HPNPAMs showed lower critical solution temperature (LCST due to an appropriate ratio between hydrophilic and hydrophobic groups. The effects of reaction conditions on polymerization were investigated in detail. The structure of HPNPAM was characterized by 1H NMR, FT-IR, Muti detector-size exclusion chromatography (MDSEC and Ultravioletvisble (UV-Vis. The α value reached 0.20 and DB was 90%, indicating HPNPAMs with compact topology structure were successfully prepared. LCSTs were tuned by Mw and the pH value of the solution. The change of molecular size was assayed by dynamic light scattering and scanning electron microscope. These results indicated that the stable uniform nanomicelles were destroyed and macromolecules aggregated together, forming large particles as temperature exceeded LCST. In addition, after the cells were incubated for 24 h, the cell viability reached 80%, which confirmed this new dual responsive HPNPAM had low cytotoxicity.

  16. Alpha-amidated peptides derived from pro-opiomelanocortin in normal human pituitary

    DEFF Research Database (Denmark)

    Fenger, M; Johnsen, A H

    1988-01-01

    Normal human pituitaries were extracted in boiling water and acetic acid, and the alpha-amidated peptide products of pro-opiomelanocortin (POMC), alpha-melanocyte-stimulating hormone (alpha MSH), gamma-melanocyte-stimulating hormone (gamma 1MSH), and amidated hinge peptide (HP-N), as well...... as their glycine-extended precursors, were characterized by sequence-specific radioimmunoassays, gel-chromatography, h.p.l.c. and amino acid sequencing. alpha MSH and gamma 1MSH constituted 0.27-1.32% and 0.10-5.10%, respectively, of the POMC-derived products [calculated as the sum of adrenocorticotropic hormone...... (ACTH)-(1-39), ACTH-(1-14) and alpha MSH immunoreactivity]. alpha MSH and ACTH-(1-14) were only present in non- or mono-acetylated forms. Only large forms of gamma 1MSH and gamma 2MSH were present in partly glycosylated states. The hinge peptides were amidated to an extent two to three orders...

  17. Lipase-catalyzed synthesis of fatty acid amide (erucamide) using fatty acid and urea.

    Science.gov (United States)

    Awasthi, Neeraj Praphulla; Singh, R P

    2007-01-01

    Ammonolysis of fatty acids to the corresponding fatty acid amides is efficiently catalysed by Candida antartica lipase (Novozym 435). In the present paper lipase-catalysed synthesis of erucamide by ammonolysis of erucic acid and urea in organic solvent medium was studied and optimal conditions for fatty amides synthesis were established. In this process erucic acid gave 88.74 % pure erucamide after 48 hour and 250 rpm at 60 degrees C with 1:4 molar ratio of erucic acid and urea, the organic solvent media is 50 ml tert-butyl alcohol (2-methyl-2-propanol). This process for synthesis is economical as we used urea in place of ammonia or other amidation reactant at atmospheric pressure. The amount of catalyst used is 3 %.

  18. Alpha-amidated peptides derived from pro-opiomelanocortin in human pituitary tumours

    DEFF Research Database (Denmark)

    Fenger, M; Johnsen, A H

    1988-01-01

    Human pituitary tumours, obtained at surgery for Cushing's disease and Nelson's syndrome, were extracted and the content and molecular forms of pro-opiomelanocortin (POMC)-derived peptides determined by radioimmunoassay, gel chromatography, reversed-phase high-performance liquid chromatography...... (HPLC) and sequence analysis. In the tumours from patients with Cushing's disease the mean concentrations of amidated peptides relative to the total amount of POMC were as follows: alpha-MSH, 1.7%; amidated gamma-MSH (gamma 1-MSH), 8.5% and the peptide linking gamma-MSH and ACTH in the precursor (hinge....... In conclusion, all the molecular forms of the amidated peptides detected in tumours from patients with Cushing's disease and Nelson's syndrome were similar to the molecular forms found in the normal human pituitary. The main difference between the tumours and the normal pituitary was the greater amount...

  19. Redução de amidas por boranos Reduction of amides by boranes

    Directory of Open Access Journals (Sweden)

    Antônio Flávio de Carvalho Alcântara

    2002-05-01

    Full Text Available Despite the fact that boranes are frequently used in amide reductions, the reaction mechanisms of the involved are note well known. This work presents the results of a bibliographic search on probable amide reduction mechanisms and an analysis of the existing literature. Steric and electronic effects were considered in light of reactivity since it could be concluded that the formation of intermediates and products depends mainly on the substitution patterns of both the boron and nitrogen atoms. Otherwise, results described in the literature for the reactions of boranes, sodium borohydride, lithium aluminum hydride, alkylboranes or haloboranes with others functional groups such as carboxylic acids, esters, ketones and alkenes were analysed with the aim to obtain something about the N-substituted amide reactions employing boranes.

  20. PrAS: Prediction of amidation sites using multiple feature extraction.

    Science.gov (United States)

    Wang, Tong; Zheng, Wei; Wuyun, Qiqige; Wu, Zhenfeng; Ruan, Jishou; Hu, Gang; Gao, Jianzhao

    2017-02-01

    Amidation plays an important role in a variety of pathological processes and serious diseases like neural dysfunction and hypertension. However, identification of protein amidation sites through traditional experimental methods is time consuming and expensive. In this paper, we proposed a novel predictor for Prediction of Amidation Sites (PrAS), which is the first software package for academic users. The method incorporated four representative feature types, which are position-based features, physicochemical and biochemical properties features, predicted structure-based features and evolutionary information features. A novel feature selection method, positive contribution feature selection was proposed to optimize features. PrAS achieved AUC of 0.96, accuracy of 92.1%, sensitivity of 81.2%, specificity of 94.9% and MCC of 0.76 on the independent test set. PrAS is freely available at https://sourceforge.net/p/praspkg. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Synthesis, Anticancer and Antibacterial Activity of Salinomycin N-Benzyl Amides

    Directory of Open Access Journals (Sweden)

    Michał Antoszczak

    2014-11-01

    Full Text Available A series of 12 novel monosubstituted N-benzyl amides of salinomycin (SAL was synthesized for the first time and characterized by NMR and FT-IR spectroscopic methods. Molecular structures of three salinomycin derivatives in the solid state were determined using single crystal X-ray method. All compounds obtained were screened for their antiproliferative activity against various human cancer cell lines as well as against the most problematic bacteria strains such as methicillin-resistant Staphylococcus aureus (MRSA and Staphylococcus epidermidis (MRSE, and Mycobacterium tuberculosis. Novel salinomycin derivatives exhibited potent anticancer activity against drug-resistant cell lines. Additionally, two N-benzyl amides of salinomycin revealed interesting antibacterial activity. The most active were N-benzyl amides of SAL substituted at -ortho position and the least anticancer active derivatives were those substituted at the -para position.

  2. Synthesis and Characterization of Novel Polyurethanes Based on Vegetable Oils Amide and Ester Polyols

    Directory of Open Access Journals (Sweden)

    Vladimir YAKUSHIN

    2014-09-01

    Full Text Available Amide and ester type polyols were synthesized from rapeseed, sunflower and castor oils, and two types of ethanolamine (diethanolamine and triethanolamine at different molar ratio. Poly(urethane amides and polyester urethanes based on the synthesized polyols were prepared. The effect of the chemical structure of the obtained polyurethanes on density, glass transition temperature, thermal stability and mechanical properties was investigated. The influence of the content of OH groups in the synthesized polyols on the specified characteristics was estimated. It has been found that poly(urethane amides have better mechanical characteristics, but their thermal stability is lower than that of polyester urethanes. The chemical structure of the synthesized polyols and polyurethanes is qualitatively confirmed by IR-spectroscopy data. DOI: http://dx.doi.org/10.5755/j01.ms.20.3.4532

  3. A comprehensive study of the complexation of alkali metal cations by lower rim calix[4]arene amide derivatives.

    Science.gov (United States)

    Horvat, Gordan; Frkanec, Leo; Cindro, Nikola; Tomišić, Vladislav

    2017-09-13

    The complexation of alkali metal cations by lower rim N,N-dihexylacetamide (L1) and newly synthesized N-hexyl-N-methylacetamide (L2) calix[4]arene tertiary-amide derivatives was thoroughly studied at 25 °C in acetonitrile (MeCN), benzonitrile (PhCN), and methanol (MeOH) by means of direct and competitive microcalorimetric titrations, and UV and 1 H NMR spectroscopies. In addition, by measuring the ligands' solubilities, the solution (transfer) Gibbs energies of the ligands and their alkali metal complexes were obtained. The inclusion of solvent molecules in the free and complexed calixarene hydrophobic cavities was also investigated. Computational (classical molecular dynamics) investigations of the studied systems were also carried out. The obtained results were compared with those previously obtained by studying the complexation ability of an N-hexylacetamidecalix[4]arene secondary-amide derivative (L3). The stability constants of 1 : 1 complexes were determined in all solvents used (the values obtained by different methods being in excellent agreement), as were the corresponding complexation enthalpies and entropies. Almost all of the examined reactions were enthalpically controlled. The most striking exceptions were reactions of Li + with both ligands in methanol, for which the entropic contribution to the reaction Gibbs energy was substantial due the entropically favourable desolvation of the smallest lithium cation. The thermodynamic stabilities of the complexes were quite solvent dependent (the stability decreased in the solvent order: MeCN > PhCN ≫ MeOH), which could be accounted for by considering the differences in the solvation of the ligand and free and complexed alkali metal cations in the solvents used. Comparison of the stability constants of the ligand L1 and L2 complexes clearly revealed that the higher electron-donating ability of the hexyl with respect to the methyl group is of considerable importance in determining the equilibria of the

  4. Synthesis and characterization of alternating poly(amide urea)s and poly(amide urethane urethane)s from ε-caprolactam, diamines, and diphenyl carbonate or ethylene carbonate

    NARCIS (Netherlands)

    Ubaghs, Luc; Sharma, Bhaskar; Keul, Helmut; Höcker, Hartwig; Loontjens, Ton; Benthem, Rolf van

    2003-01-01

    Alternating poly(amide urea)s from ε-caprolactam, diamines H2N-(CH2)x-NH2 (x = 2 - 4), and diphenyl carbonate were prepared in two steps. The microstructure of the poly(amide urea)s, as determined by means of 1H NMR spectroscopy, reveals a strictly alternating sequence of the building blocks. The

  5. Solvatomagnetic Comparison Method: A Proper Quantification of Solvent Hydrogen-Bond Basicity.

    Science.gov (United States)

    Laurence, Christian; Legros, Julien; Nicolet, Pierre; Vuluga, Daniela; Chantzis, Agisilaos; Jacquemin, Denis

    2014-07-10

    The hydrogen-bond-acceptor basicity of an important class of solvents, the amphiprotic solvents (water, alcohols, primary and secondary amides, and carboxylic acids), has not yet been properly parametrized. In this work, the first scale of solvent hydrogen-bond basicity applicable to amphiprotic solvents is established by means of a new method that compares the 19 F NMR chemical shifts of 4-fluorophenol and 4-fluoroanisole in hydrogen-bond-acceptor solvents. This so-called solvatomagnetic comparison method is free of the shortcomings of the solvatochromic comparison method used so far and is easier to carry out than the pure base calorimetric method. The validity of the new scale is assessed by good linear correlations with spectroscopic, thermodynamic, and kinetic solute properties depending on the solvent hydrogen-bond basicity. In such correlation analysis of solvent effects on physicochemical properties, solvent and solute hydrogen-bond basicity scales must not be mixed, since it is shown here that solute and solvent scales are not equivalent. A comprehensive collection of parameters quantifying the hydrogen-bond basicity is presented for 168 solvents.

  6. Can Csbnd H⋯Fsbnd C hydrogen bonds alter crystal packing features in the presence of Nsbnd H⋯Odbnd C hydrogen bond?

    Science.gov (United States)

    Yadav, Hare Ram; Choudhury, Angshuman Roy

    2017-12-01

    Intermolecular interactions involving organic fluorine have been the contemporary field of research in the area of organic solid state chemistry. While a group of researchers had refuted the importance of "organic fluorine" in guiding crystal structures, others have provided evidences for in favor of fluorine mediated interactions in the solid state. Many systematic studies have indicated that the "organic fluorine" is capable of offering weak hydrogen bonds through various supramolecular synthons, mostly in the absence of other stronger hydrogen bonds. Analysis of fluorine mediated interaction in the presence of strong hydrogen bonds has not been highlighted in detail. Hence a thorough structural investigation is needed to understand the role of "organic fluorine" in crystal engineering of small organic fluorinated molecules having the possibility of strong hydrogen bond formation in the solution and in the solid state. To fulfil this aim, we have synthesized a series of fluorinated amides using 3-methoxyphenylacetic acid and fluorinated anilines and studied their structural properties through single crystal and powder X-ray diffraction methods. Our results indicated that the "organic fluorine" plays a significant role in altering the packing characteristics of the molecule in building specific crystal lattices even in the presence of strong hydrogen bond.

  7. Synthesis, properties and applications of biodegradable polymers derived from diols and dicarboxylic acids: from polyesters to poly(ester amide)s.

    Science.gov (United States)

    Díaz, Angélica; Katsarava, Ramaz; Puiggalí, Jordi

    2014-04-25

    Poly(alkylene dicarboxylate)s constitute a family of biodegradable polymers with increasing interest for both commodity and speciality applications. Most of these polymers can be prepared from biobased diols and dicarboxylic acids such as 1,4-butanediol, succinic acid and carbohydrates. This review provides a current status report concerning synthesis, biodegradation and applications of a series of polymers that cover a wide range of properties, namely, materials from elastomeric to rigid characteristics that are suitable for applications such as hydrogels, soft tissue engineering, drug delivery systems and liquid crystals. Finally, the incorporation of aromatic units and α-amino acids is considered since stiffness of molecular chains and intermolecular interactions can be drastically changed. In fact, poly(ester amide)s derived from naturally occurring amino acids offer great possibilities as biodegradable materials for biomedical applications which are also extensively discussed.

  8. Synthesis, Properties and Applications of Biodegradable Polymers Derived from Diols and Dicarboxylic Acids: From Polyesters to Poly(ester amide)s

    Science.gov (United States)

    Díaz, Angélica; Katsarava, Ramaz; Puiggalí, Jordi

    2014-01-01

    Poly(alkylene dicarboxylate)s constitute a family of biodegradable polymers with increasing interest for both commodity and speciality applications. Most of these polymers can be prepared from biobased diols and dicarboxylic acids such as 1,4-butanediol, succinic acid and carbohydrates. This review provides a current status report concerning synthesis, biodegradation and applications of a series of polymers that cover a wide range of properties, namely, materials from elastomeric to rigid characteristics that are suitable for applications such as hydrogels, soft tissue engineering, drug delivery systems and liquid crystals. Finally, the incorporation of aromatic units and α-amino acids is considered since stiffness of molecular chains and intermolecular interactions can be drastically changed. In fact, poly(ester amide)s derived from naturally occurring amino acids offer great possibilities as biodegradable materials for biomedical applications which are also extensively discussed. PMID:24776758

  9. [Aminomethyl derivatives of (benzisothiazolin-3-one-2-yl)acetic acid amides and 2-(1,2-benzisothiazoline-3-one-2-yl)propionic acid amides].

    Science.gov (United States)

    Sławik, T

    1991-11-01

    In the search for pharmacological active new derivatives of 1,2-benzisothiazolin-3-on amides of (3-oxo-1,2-benzisothiazolin-2-yl)acetic acid and 3-(3-oxo-1,2-benzisothiazolin-2-yl)propionic acid were obtained. In the reaction of these amides with formaldehyde and various second aryl amines the title compounds are formed. Morpholinmethylamide of (3-oxo-1,2-benzisothiazolin-2-yl)acetic acid showed activity against Trichomonas vaginalis. In the reaction of ethyl esters of (3-oxo-1,2-benzisothiazolin-2-yl) acetic- and -propionic acids with hydrazine hydrate products of ring-opening of isothiazole-2,2'-dithio-bis [N- (ethoxycarbonylmethyl)benzamide] and 2,2'-dithio-bis[N-(ethoxycarbonylethyl)benzamide are formed.

  10. N,N-Diethylurea-Catalyzed Amidation between Electron-Defficient Aryl Azides and Phenylacetaldehydes

    Science.gov (United States)

    Xie, Sheng; Ramström, Olof; Yan, Mingdi

    2015-01-01

    Urea structures, of which N,N-diethylurea (DEU) proved to be the most efficient, were discovered to catalyze amidation reactions between electron-defficient aryl azides and phenylacetaldehydes. Experimental data support 1,3-dipolar cycloaddition between DEU-activated enols and electrophilic phenyl azides, especially perfluoroaryl azides, followed by rearrangement of the triazoline intermediate. The activation of the aldehyde under near-neutral conditions was of special importance in inhibiting dehydration/aromatization of the triazoline intermediate, thus promoting the rearrangement to form aryl amides. PMID:25616121

  11. N,N-diethylurea-catalyzed amidation between electron-deficient aryl azides and phenylacetaldehydes.

    Science.gov (United States)

    Xie, Sheng; Ramström, Olof; Yan, Mingdi

    2015-02-06

    Urea structures, of which N,N-diethylurea (DEU) proved to be the most efficient, were discovered to catalyze amidation reactions between electron-deficient aryl azides and phenylacetaldehydes. Experimental data support 1,3-dipolar cycloaddition between DEU-activated enols and electrophilic phenyl azides, especially perfluoroaryl azides, followed by rearrangement of the triazoline intermediate. The activation of the aldehyde under near-neutral conditions was of special importance in inhibiting dehydration/aromatization of the triazoline intermediate, thus promoting the rearrangement to form aryl amides.

  12. Hydrolysis of ibuprofen nitrile and ibuprofen amide and deracemisation of ibuprofen using Nocardia corallina B-276.

    Science.gov (United States)

    Lievano, Ricardo; Pérez, Herminia Inés; Manjarrez, Norberto; Solís, Aida; Solís-Oba, Myrna

    2012-03-12

    A novel application of whole cells of Nocardia corallina B-276 for the deracemisation of ibuprofen is reported. This microorganism successfully hydrolysed ibuprofen nitrile to ibuprofen amide, and ibuprofen amide to ibuprofen, using a suspension of cells in a potassium phosphate buffer solution (0.1 M, pH = 7.0). These results can be explained by the presence of NHase and amidase enzymes, but the reactions are not enantioselective and low ee values were obtained. However, (R)-ibuprofen was isolated with > 99% ee by a deracemisation process catalysed by N. corallina B-276. This is the first report of this kind of catalysis with this microorganism.

  13. Hydrolysis of Ibuprofen Nitrile and Ibuprofen Amide and Deracemisation of Ibuprofen Using Nocardia corallina B-276

    Directory of Open Access Journals (Sweden)

    Myrna Solís-Oba

    2012-03-01

    Full Text Available A novel application of whole cells of Nocardia corallina B-276 for the deracemisation of ibuprofen is reported. This microorganism successfully hydrolysed ibuprofen nitrile to ibuprofen amide, and ibuprofen amide to ibuprofen, using a suspension of cells in a potassium phosphate buffer solution (0.1 M, pH = 7.0. These results can be explained by the presence of NHase and amidase enzymes, but the reactions are not enantioselective and low ee values were obtained. However, (R-ibuprofen was isolated with >99% ee by a deracemisation process catalysed by N. corallina B-276. This is the first report of this kind of catalysis with this microorganism.

  14. Safety Assessment of Amino Acid Alkyl Amides as Used in Cosmetics.

    Science.gov (United States)

    Burnett, Christina L; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    The Cosmetic Ingredient Review Expert Panel (Panel) reviewed the product use, formulation, and safety data of 115 amino acid alkyl amides, which function as skin and hair conditioning agents and as surfactants-cleansing agents in personal care products. Safety test data on dermal irritation and sensitization for the ingredients with the highest use concentrations, lauroyl lysine and sodium lauroyl glutamate, were reviewed and determined to adequately support the safe use of the ingredients in this report. The Panel concluded that amino acid alkyl amides are safe in the present practices of use and concentration in cosmetics, when formulated to be nonirritating.

  15. Occurrence, biological activities and {sup 13}C NMR data of amides from Piper (Piperaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, Jeferson C. do; Paula, Vanderlucia F. de [Universidade Estadual do Sudoeste da Bahia, Jequie, BA (Brazil). Dept. de Quimica e Exatas; David, Jorge M. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Quimica; David, Juceni P., E-mail: jmdavid@ufba.br [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Fac. de Farmacia

    2012-07-01

    This manuscript describes an update review with up to 285 references concerning the occurrence of amides from a variety of species of the genus Piper (Piperaceae). Besides addressing occurrence, this review also describes the biological activities attributed to extracts and pure compounds, a compiled {sup 13}C NMR data set, the main correlations between structural and NMR spectroscopic data of these compounds, and employment of hyphened techniques such as LC-MS, GC-MS and NMR for analysis of amides from biological samples and crude Piper extracts. (author)

  16. Uranyl Photocleavage of Phosphopeptides Yields Truncated C-Terminally Amidated Peptide Products

    DEFF Research Database (Denmark)

    Elnegaard, Rasmus L B; Møllegaard, Niels Erik; Zhang, Qiang

    2017-01-01

    The uranyl ion (UO2(2+) ) binds phosphopeptides with high affinity, and when irradiated with UV-light, it can cleave the peptide backbone. In this study, high-accuracy tandem mass spectrometry and enzymatic assays were used to characterise the photocleavage products resulting from the uranyl phot...... challenges in green pharmaceutical chemistry....... photocleavage reaction of a tetraphosphorylated β-casein model peptide. We show that the primary photocleavage products of the uranyl-catalysed reaction are C-terminally amidated. This could be of great interest to the pharmaceutical industry, as efficient peptide amidation reactions are one of the top...

  17. Shear and dielectric responses of propylene carbonate, tripropylene glycol, and a mixture of two secondary amides

    DEFF Research Database (Denmark)

    Gainaru, Catalin; Hecksher, Tina; Olsen, Niels Boye

    2012-01-01

    to calculate the dielectric from the mechanical response and vice versa. Using a single parameter for a given system, good agreement between model calculations and experimental data is achieved for the entire relaxation spectra, including secondary relaxations and the Debye-like dielectric peak......Propylene carbonate and a mixture of two secondary amides, N-ethylformamide and Nethylacetamide, are investigated by means of broadband dielectric and mechanical shear spectroscopy. The similarities between the rheological and the dielectric responses of these liquids and of the previously...... in the secondary amides. In addition, the predictions of the shoving model are confirmed for the investigated liquids...

  18. Synthesis and Characterization of Ethylene DiamineTetera Acetic Acid Polyester-amides polymer with Aminoalcohol

    Directory of Open Access Journals (Sweden)

    Dakhil Nasser Taha

    2017-02-01

    Full Text Available linear aromatic and aliphatic polyester-amides (PEAs have been synthesized by polycondensation of aliphatic and aromatic aminoalcohol (Ethanol amine, 2-amino-2-methyl-propan-1-ol, m-amino phenol with Ethylenediaminetetraacetic acid (EDTA as a favorable and combined complexing compound was joined into the polymer backbone with poly addition reactions. These polymers were characterized by FTIR, 1H NMR, solubility studies , elemental analysis, , Thermal analyses such as TGA were measured, intrinsic viscosity. The poly(ester-amides obtained show good thermal stability.

  19. Occurrence, biological activities and 13C NMR data of amides from Piper (Piperaceae

    Directory of Open Access Journals (Sweden)

    Jeferson C. do Nascimento

    2012-01-01

    Full Text Available This manuscript describes an update review with up to 285 references concerning the occurrence of amides from a variety of species of the genus Piper (Piperaceae. Besides addressing occurrence, this review also describes the biological activities attributed to extracts and pure compounds, a compiled 13C NMR data set, the main correlations between structural and NMR spectroscopic data of these compounds, and employment of hyphened techniques such as LC-MS, GC-MS and NMR for analysis of amides from biological samples and crude Piper extracts.

  20. Hydrolysis of Ibuprofen Nitrile and Ibuprofen Amide and Deracemisation of Ibuprofen Using Nocardia corallina B-276

    OpenAIRE

    Myrna Solís-Oba; Norberto Manjarrez; Aida Solís; Ricardo Lievano; Herminia Inés Pérez

    2012-01-01

    A novel application of whole cells of Nocardia corallina B-276 for the deracemisation of ibuprofen is reported. This microorganism successfully hydrolysed ibuprofen nitrile to ibuprofen amide, and ibuprofen amide to ibuprofen, using a suspension of cells in a potassium phosphate buffer solution (0.1 M, pH = 7.0). These results can be explained by the presence of NHase and amidase enzymes, but the reactions are not enantioselective and low ee values were obtained. However, (R)-ibuprofen was is...

  1. Comparison of shear bond strength of the stainless steel metallic brackets bonded by three bonding systems

    Directory of Open Access Journals (Sweden)

    Mehdi Ravadgar

    2013-09-01

    Full Text Available Introduction: In orthodontic treatment, it is essential to establish a satisfactory bond between enamel and bracket. After the self-etch primers (SEPs were introduced for the facilitation of bracket bonding in comparison to the conventional etch-and-bond system, multiple studies have been carried out on their shear bond strengths which have yielded different results. This study was aimed at comparing shear bond strengths of the stainless steel metallic brackets bonded by three bonding systems. Methods: In this experimental in vitro study, 60 extracted human maxillary premolar teeth were randomly divided into three equal groups: in the first group, Transbond XT (TBXT light cured composite was bonded with Transbond plus self-etching primer (TPSEP; in the second group, TBXT composite was bonded with the conventional method of acid etching; and in the third group, the self cured composite Unite TM bonding adhesive was bonded with the conventional method of acid etching. In all the groups, Standard edgewise-022 metallic brackets (American Orthodontics, Sheboygan, USA were used. Twenty-four hours after the completion of thermocycling, shear bond strength of brackets was measured by Universal Testing Machine (Zwick. In order to compare the shear bond strengths of the groups, the variance analysis test (ANOVA was adopted and p≤0.05 was considered as a significant level. Results: Based on megapascal, the average shear bond strength for the first, second, and third groups was 8.27±1.9, 9.78±2, and 8.92±2.5, respectively. There was no significant difference in the shear bond strength of the groups. Conclusions: Since TPSEP shear bond strength is approximately at the level of the conventional method of acid etching and within the desirable range for orthodontic brackets shear bond strength, applying TPSEP can serve as a substitute for the conventional method of etch and bond, particularly in orthodontic operations.

  2. Learning probabilistic models of hydrogen bond stability from molecular dynamics simulation trajectories

    KAUST Repository

    Chikalov, Igor

    2011-02-15

    Background: Hydrogen bonds (H-bonds) play a key role in both the formation and stabilization of protein structures. They form and break while a protein deforms, for instance during the transition from a non-functional to a functional state. The intrinsic strength of an individual H-bond has been studied from an energetic viewpoint, but energy alone may not be a very good predictor.Methods: This paper describes inductive learning methods to train protein-independent probabilistic models of H-bond stability from molecular dynamics (MD) simulation trajectories of various proteins. The training data contains 32 input attributes (predictors) that describe an H-bond and its local environment in a conformation c and the output attribute is the probability that the H-bond will be present in an arbitrary conformation of this protein achievable from c within a time duration ?. We model dependence of the output variable on the predictors by a regression tree.Results: Several models are built using 6 MD simulation trajectories containing over 4000 distinct H-bonds (millions of occurrences). Experimental results demonstrate that such models can predict H-bond stability quite well. They perform roughly 20% better than models based on H-bond energy alone. In addition, they can accurately identify a large fraction of the least stable H-bonds in a conformation. In most tests, about 80% of the 10% H-bonds predicted as the least stable are actually among the 10% truly least stable. The important attributes identified during the tree construction are consistent with previous findings.Conclusions: We use inductive learning methods to build protein-independent probabilistic models to study H-bond stability, and demonstrate that the models perform better than H-bond energy alone. 2011 Chikalov et al; licensee BioMed Central Ltd.

  3. Studies on peptide amidase-catalysed C-terminal peptide amidation in organic media with respect to its substrate specificity

    Czech Academy of Sciences Publication Activity Database

    Čeřovský, Václav; Kula, M. R.

    2001-01-01

    Roč. 33, - (2001), s. 183-187 ISSN 0885-4513 R&D Projects: GA ČR GA203/99/1458 Keywords : enzymic amidation * peptide amides * peptide synthesis Subject RIV: CC - Organic Chemistry Impact factor: 1.408, year: 2001

  4. Solvent extraction of uranium(VI) and thorium(IV) from nitrate media by carboxylic acid amides

    International Nuclear Information System (INIS)

    Preston, J.S.; Preez, A.C. du

    1995-01-01

    A series of nineteen N-alkyl carboxylic acid amides (R.CO.NHR') has been prepared, in which the alkyl groups R and R' have been varied in order to introduce different degrees of steric complexity into the compounds. A smaller number of N,N-dialkyl amides (R.CO.NR 2 ') and non-substituted amides (R.CO.NH 2 ) has also been prepared for comparison purposes. These amides were characterized by measurement of their boiling points, melting points, refractive indices and densities. The solvent extraction of uranium(VI) and thorium(IV) from sodium nitrate media by solutions of the amides in toluene was studied. Increasing steric bulk of the alkyl groups R and R' was found to cause a marked decrease in the extraction of thorium, with a much smaller effect on the extraction of uranium, thus considerably enhancing the separation between these metals. Vapour pressure osmometry studies indicate that the N-alkyl amides are self-associated in toluene solution, with aggregation numbers up to about 2.5 for 0.6 M solutions at 35 degree C. In contrast, the N,N-dialkyl amides behave as monomers under these conditions. The distribution ratios for the extraction of uranium and thorium show second- and third-order dependences, respectively, on the extractant concentration for both the N-alkyl and N,N-dialkyl amides. 15 refs., 8 figs., 8 tabs

  5. Preparation and characterization of tablet formulation based on solid dispersion of glimepiride and poly(ester amide) hyperbranched polymer.

    Science.gov (United States)

    Reven, Sebastjan; Homar, Miha; Peternel, Luka; Kristl, Julijana; Žagar, Ema

    2013-01-01

    The feasibility of incorporating a solid dispersion containing poorly soluble antidiabetic drug glimepiride and poly(ester amide) hyperbranched polymer into a tablet using a direct-compression tabletting technique was investigated. Tablet cores were additionally coated with hydroxypropyl methylcellulose phthalate in order to protect the extremely hygroscopic solid dispersion from atmospheric moisture. Preliminary stability studies show that glimepiride, which is in amorphous form within solid dispersion, is chemically stable, even if tablets are exposed to elevated temperature and/or moisture. In-vitro dissolution studies show some impact of storage conditions on the tablet cores disintegration time and, consequently, drug release rate. Glimepiride solubility also deteriorates somewhat, most probably due to its partial recrystallization. Storage conditions much less affect the physical stability of coated tablets, which was ascribed to reduced tablet hygroscopicity due to the presence of protecting coating. The hyperbranched polymers are rather new and complex macromolecules. Therefore, we addressed also the biocompatibility of hyperbranched polymer, i.e., its impact on haemolysis of the red blood cells. The concentration required for the haemolytic effect on the red blood cells is around 100-times higher than its expected gastrointestinal luminal concentration, which makes the occurrence of hyperbranched polymer mediated cytotoxicity very unlikely.

  6. Non-amidated and amidated members of the C-type allatostatin (AST-C) family are differentially distributed in the stomatogastric nervous system of the American lobster, Homarus americanus.

    Science.gov (United States)

    Christie, Andrew E; Miller, Alexandra; Fernandez, Rebecca; Dickinson, Evyn S; Jordan, Audrey; Kohn, Jessica; Youn, Mina C; Dickinson, Patsy S

    2018-01-13

    The crustacean stomatogastric nervous system (STNS) is a well-known model for investigating neuropeptidergic control of rhythmic behavior. Among the peptides known to modulate the STNS are the C-type allatostatins (AST-Cs). In the lobster, Homarus americanus, three AST-Cs are known. Two of these, pQIRYHQCYFNPISCF (AST-C I) and GNGDGRLYWRCYFNAVSCF (AST-C III), have non-amidated C-termini, while the third, SYWKQCAFNAVSCFamide (AST-C II), is C-terminally amidated. Here, antibodies were generated against one of the non-amidated peptides (AST-C I) and against the amidated isoform (AST-C II). Specificity tests show that the AST-C I antibody cross-reacts with both AST-C I and AST-C III, but not AST-C II; the AST-C II antibody does not cross-react with either non-amidated peptide. Wholemount immunohistochemistry shows that both subclasses (non-amidated and amidated) of AST-C are distributed throughout the lobster STNS. Specifically, the antibody that cross-reacts with the two non-amidated peptides labels neuropil in the CoGs and the stomatogastric ganglion (STG), axons in the superior esophageal (son) and stomatogastric (stn) nerves, and ~ 14 somata in each commissural ganglion (CoG). The AST-C II-specific antibody labels neuropil in the CoGs, STG and at the junction of the sons and stn, axons in the sons and stn, ~ 42 somata in each CoG, and two somata in the STG. Double immunolabeling shows that, except for one soma in each CoG, the non-amidated and amidated peptides are present in distinct sets of neuronal profiles. The differential distributions of the two AST-C subclasses suggest that the two peptide groups are likely to serve different modulatory roles in the lobster STNS.

  7. Stable isotope analysis

    International Nuclear Information System (INIS)

    Tibari, Elghali; Taous, Fouad; Marah, Hamid

    2014-01-01

    This report presents results related to stable isotopes analysis carried out at the CNESTEN DASTE in Rabat (Morocco), on behalf of Senegal. These analyzes cover 127 samples. These results demonstrate that Oxygen-18 and Deuterium in water analysis were performed by infrared Laser spectroscopy using a LGR / DLT-100 with Autosampler. Also, the results are expressed in δ values (‰) relative to V-SMOW to ± 0.3 ‰ for oxygen-18 and ± 1 ‰ for deuterium.

  8. Bond yield curve construction

    Directory of Open Access Journals (Sweden)

    Kožul Nataša

    2014-01-01

    Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.

  9. Forensic Stable Isotope Biogeochemistry

    Science.gov (United States)

    Cerling, Thure E.; Barnette, Janet E.; Bowen, Gabriel J.; Chesson, Lesley A.; Ehleringer, James R.; Remien, Christopher H.; Shea, Patrick; Tipple, Brett J.; West, Jason B.

    2016-06-01

    Stable isotopes are being used for forensic science studies, with applications to both natural and manufactured products. In this review we discuss how scientific evidence can be used in the legal context and where the scientific progress of hypothesis revisions can be in tension with the legal expectations of widely used methods for measurements. Although this review is written in the context of US law, many of the considerations of scientific reproducibility and acceptance of relevant scientific data span other legal systems that might apply different legal principles and therefore reach different conclusions. Stable isotopes are used in legal situations for comparing samples for authenticity or evidentiary considerations, in understanding trade patterns of illegal materials, and in understanding the origins of unknown decedents. Isotope evidence is particularly useful when considered in the broad framework of physiochemical processes and in recognizing regional to global patterns found in many materials, including foods and food products, drugs, and humans. Stable isotopes considered in the larger spatial context add an important dimension to forensic science.

  10. Dynamic kinetic resolution of amino acid amide catalyzed by D-aminopeptidase and alpha-amino-epsilon-caprolactam racemase.

    Science.gov (United States)

    Asano, Yasuhisa; Yamaguchi, Shigenori

    2005-06-01

    Amino acid amide racemizing activity was discovered in alpha-amino-epsilon-caprolactam (ACL) racemase (EC 5. 1. 1. 15) from Achromobacter obae. The enzymatic synthesis of d-alanine from l-alanine amide has been demonstrated by use of d-aminopeptidase (DAP; EC 3. 4. 11. 19) from Ochrobactrum anthropi C1-38 and ACL racemase. The conversion of 45 mM l-alanine amide was carried out at 30 degrees C for 7 h; l-alanine amide was completely converted to d-alanine, and no l-alanine was detected. The result of successive enzymatic reaction shows that the combination of ACL racemase and DAP can be applied for dynamic kinetic resolution of dl-amino acid amides to yield d-amino acids.

  11. Safe and Liquid Mortgage Bonds

    DEFF Research Database (Denmark)

    Dick-Nielsen, Jens; Gyntelberg, Jacob; Lund, Jesper

    eliminates credit risk from the investor's perspective. Similar to other safe bonds, funding liquidity becomes the main driver of mortgage bond liquidity and this creates commonality in liquidity across markets and countries. These findings have implications for how to design a robust mortgage bond system...

  12. The chemical bond in inorganic chemistry the bond valence model

    CERN Document Server

    Brown, I David

    2016-01-01

    The bond valence model is a version of the ionic model in which the chemical constraints are expressed in terms of localized chemical bonds formed by the valence charge of the atoms. Theorems derived from the properties of the electrostatic flux predict the rules obeyed by both ionic and covalent bonds. They make quantitative predictions of coordination number, crystal structure, bond lengths and bond angles. Bond stability depends on the matching of the bonding strengths of the atoms, while the conflicting requirements of chemistry and space lead to the structural instabilities responsible for the unusual physical properties displayed by some materials. The model has applications in many fields ranging from mineralogy to molecular biology.

  13. An assessment of bonding characteristics of a newly introduced bonding agent: "beauty ortho bond"

    Directory of Open Access Journals (Sweden)

    Padmashree Veeramachineni

    2010-01-01

    Conclusion: Although Transbond XT had higher bond strength, the BOB and FOLC showed clinically acceptable bond strengths. However, clean-up after debonding would be easier with the two latter materials.

  14. Structural dynamics of soluble chloride intracellular channel protein CLIC1 examined by amide hydrogen-deuterium exchange mass spectrometry.

    Science.gov (United States)

    Stoychev, Stoyan H; Nathaniel, Christos; Fanucchi, Sylvia; Brock, Melissa; Li, Sheng; Asmus, Kyle; Woods, Virgil L; Dirr, Heini W

    2009-09-08

    Chloride intracellular channel protein 1 (CLIC1) functions as an anion channel in plasma and nuclear membranes when its soluble monomeric form converts to an integral-membrane form. The transmembrane region of CLIC1 is located in its thioredoxin-like domain 1, but the mechanism whereby the protein converts to its membrane conformation has yet to be determined. Since channel formation in membranes is enhanced at low pH (5 to 5.5), a condition that is found at the surface of membranes, the structural dynamics of soluble CLIC1 was studied at pH 7 and at pH 5.5 in the absence of membranes by amide hydrogen-deuterium exchange mass spectrometry (DXMS). Rapid hydrogen exchange data indicate that CLIC1 displays a similar core structure at these pH values. Domain 1 is less stable than the all-helical domain 2, and, while the structure of domain 1 remains intact, its conformational flexibility is further increased in an acidic environment (pH 5.5). In the absence of membrane, an acidic environment appears to prime the solution structure of CLIC1 by destabilizing domain 1 in order to lower the activation energy barrier for its conversion to the membrane-insertion conformation. The significantly enhanced H/D-exchange rates at pH 5.5 displayed by two segments (peptides 11-31 and 68-82) could be due to the protonation of acidic residues in salt bridges. One of these segments (peptide 11-31) includes part of the transmembrane region which, in the solution structure, consists of helix alpha1. This helix is intrinsically stable and is most likely retained in the membrane conformation. Strand beta2, another element of the transmembrane region, displays a propensity to form a helical structure and has putative N- and C-capping motifs, suggesting that it too most likely forms a helix in a lipid bilayer.

  15. Optimal Investment in Structured Bonds

    DEFF Research Database (Denmark)

    Jessen, Pernille; Jørgensen, Peter Løchte

    The paper examines the role of structured bonds in the optimal portfolio of a small retail investor. We consider the typical structured bond essentially repacking an exotic option and a zero coupon bond, i.e. an investment with portfolio insurance. The optimal portfolio is found when the investment...... opportunities consist of a risky reference fund, a risk-free asset and a structured bond. Key model elements are the trading strategy and utility function of the investor. Our numerical results indicate structured bonds do have basis for consideration in the optimal portfolio. The product holdings...

  16. Synthesis of a-amino amides via a-amino imidoylbenzotriazoles

    Directory of Open Access Journals (Sweden)

    ALAN R. KATRITZKY

    2005-03-01

    Full Text Available Reactions of isonitriles 11a-c with N-(a-aminoalkylbenzotriazoles 10a-k afford N-(a-aminoimidoylbenzotriazoles 12a-q which on hydrolysis by dilute hydrochloric acid gave a-amino amides 14a-j.

  17. Quantum calculations of the electro-optical parameters of haloid ethers, esters, amides and carbamates

    Science.gov (United States)

    Furer, V. L.

    1992-03-01

    Force and electro-optical parameters of haloid ethers, esters, amides and carbamates were calculated using the MINDO/3 method. The obtained values of parameters, frequencies and intensities of bands in IR spectra are in good accordance with experiment. The changes of molecular parameters due to the electronic interactions and conformational transitions are discussed.

  18. Amide Synthesis from Alcohols and Amines by the Extrusion of Dihydrogen

    DEFF Research Database (Denmark)

    Nordstrøm, Lars Ulrik Rubæk; Vogt, Henning; Madsen, R.

    2008-01-01

    An environmentally friendly method for synthesis of amides is presented where a simple ruthenium catalyst mediates the direct coupling between an alcohol and an amine with the liberation of two molecules of dihydrogen. The active catalyst is generated in situ from an easily available ruthenium co...

  19. The Migration Security in Russian Society amid Ethnic and Social Conflicts Aggravation

    Directory of Open Access Journals (Sweden)

    N А Tkacheva

    2011-03-01

    Full Text Available National security protection emerges as an indispensable factor for the development of personality, society, and state amid the increasing complexity of international migration processes. The article touches upon the peculiarities of ethnic and social relations between migrants and members of the host country providing insight into the novel category of "migration security".

  20. Synthesis of Peptide Amides using Sol-Gel Immobilized Alcalase in Batch and Continuous Reaction System

    NARCIS (Netherlands)

    Corici, L.N.; Frissen, A.E.; Zoelen, van D.J.; Eggen, I.F.; Peter, F.; Davidescu, C.; Boeriu, C.G.

    2011-01-01

    Two commercial proteases from Bacillus licheniformis (Alcalase 2.4 L FG and Alcalase 2.5 L, Type DX) were screened for the production of Z-Ala-Phe-NH2 in batch reaction. Alcalase 2.4 L FG was the most efficient enzyme for the C-terminal amidation of Z-Ala-Phe-OMe using ammonium carbamate as ammonium

  1. Direct Lactamization of Azido Amides via Staudinger-Type Reductive Cyclization

    International Nuclear Information System (INIS)

    Heo, In Jung; Lee, Su Jeong; Cho, Chang Woo

    2012-01-01

    The direct lactamization of 1,3- and 1,4-azido amides has been achieved using triphenylphosphine and water, affording various γ- and δ-lactams in good to excellent yields. The direct lactamization of the azido amides was performed via the Staudinger-type reductive cyclization in which the amide group acts as the electrophile for lactam synthesis. This lactamization provides a mild, functional group tolerant and efficient route for the synthesis of various γ- and δ-lactams found in natural products and pharmaceuticals. Further studies will be conducted to develop new synthetic routes for the synthesis of various lactams. The lactam ring system is one of the most ubiquitous structural motifs found in natural products and pharmaceuticals. Owing to the prevalence of lactams, their synthesis has attracted considerable attention. Lactams are usually prepared by the coupling of activated carboxylic acid derivatives with amines. Alternative routes include the Beckmann rearrangement of oximes, the Schmidt reaction of cyclic ketones and hydrazoic acid, the Kinugasa reaction of nitrones and terminal acetylenes, the Diels-Alder reaction of cyclopentadiene and chlorosulfonyl isocyanate, transition metal catalyzed lactamization of amino alcohols, and iodolactamization of amides and alkenes. In particular, the intramolecular Staudinger ligation of azides and activated carboxy acids, including esters, is well known as an environmentally friendly and mild protocol for lactam synthesis

  2. Amide hydrogen-deuterium exchange kinetics as a test of structural states of proteins

    International Nuclear Information System (INIS)

    Popescu, Aurel I.; Craescu, Constantin

    2000-01-01

    The amide hydrogen-deuterium exchange (AHD EX ) method gives information about the accessibility degree of amide protons, on their interaction with the physico-chemical microenvironment, and implicitly, on the 3D structure of proteins. This method as useful both for the characterisation of the native state and of conformational modifications induced by protein interaction with different physico-chemical agents. The rate of the amide proton exchange for deuterium can be measured by various physical methods (NMR, MS, pulsed H/D exchange, etc.) evaluating the so-called protection factor, P, defined as the ratio between the exchange constant, k RC , experimentally determined on model peptides in a random coil conformation and the actual exchange constant, k EX , derived from the NMR spectra (e.g. the heteronuclear multiple-quantum correlation spectroscopy, HMQC). In this work, the NMR spectra of the immunophilin domain of FKBP59-I protein (both in unligated state and when it is ligated with FK506 immunosuppressor) recorded at corrected pH = 7.2, T= 308 K, are interpreted. The results show a large variety of kinetic constant values, spanning from those of very rapidly exchanging protons (non-protected) to those of very slow exchanging once (highly protected). After binding FK506, the protection factor of FKBP59-I amide protons, are significantly increased. (authors)

  3. Effects of indole amides on lettuce and onion germination and growth.

    Science.gov (United States)

    Borgati, Thiago F; Boaventura, Maria Amelia D

    2011-01-01

    Auxins, such as indole-3-acetic acid (IAA), are important in plant germination and growth, while physiological polyamines, such as putrescine, are involved in cell proliferation and differentiation, and their concentrations increase during germination. In this work, novel indole amides were synthesized in good yields by monoacylation of morpholine and unprotected symmetrical diamines with indole-3-carboxylic acid, a putative metabolite of IAA, possessing no auxin-like activity. These amides were tested for their effects on seed germination and growth of the radicles and shoots of Lactuca sativa (lettuce) and Allium cepa (onion) seedlings, at 100.0, 1.0, and 0.01 microM concentrations. Germination was generally stimulated, with the exception of amide 3, derived from morpholine, at 100 microM. On radicle and shoot growth, the effect of these compounds was predominantly inhibitory. Compound 3 was the best inhibitor of growth of lettuce and onion, at the highest concentration. Amides, such as propanil, among others, are described as having herbicidal activity.

  4. Vitamin E amides, a new class of vitamin E analogues with enhanced proapoptotic activity

    Czech Academy of Sciences Publication Activity Database

    Tomic-Vatic, A.; EyTina, J.; Chapmann, J.; Mahdavian, E.; Neužil, Jiří; Salvatore, B.A.

    2005-01-01

    Roč. 117, č. 2 (2005), s. 118-193 ISSN 0020-7136 Institutional research plan: CEZ:AV0Z5052915; CEZ:AV0Z50520514 Keywords : vitamin E amides * apoptosis * anticancer agents Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 4.700, year: 2005

  5. Fe(III) complex of biuret-amide based macrocyclic ligand as peroxidase enzyme mimic.

    Science.gov (United States)

    Panda, Chakadola; Ghosh, Munmun; Panda, Tamas; Banerjee, Rahul; Sen Gupta, Sayam

    2011-07-28

    An Fe(III) complex of a biuret-amide based macrocyclic ligand that exhibits both excellent reactivity for the activation of H(2)O(2) and high stability, especially at low pH and high ionic strength, is reported.

  6. High Performance Liquid Chromatographic Analysis of Phytoplankton Pigments Using a C16-Amide Column

    Science.gov (United States)

    A reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed to analyze in a single run, most polar and non-polar chlorophylls and carotenoids from marine phytoplankton. The method is based on a RP-C16-Amide column and a ternary gradient system consistin...

  7. Novel amide derivatives as inhibitors of histone deacetylase: design, synthesis and SAR

    DEFF Research Database (Denmark)

    Andrianov, V.; Gailite, V.; Lola, D.

    2009-01-01

    Enzymatic inhibition of histone deacetylase (HDAC) activity is emerging as an innovative and effective approach for the treatment of cancer. A series of novel amide derivatives have been synthesized and evaluated for their ability to inhibit human HDACs. Multiple compounds were identified as potent...

  8. Picolyl amides of betulinic acid as antitumor agents causing tumor cell apoptosis

    Czech Academy of Sciences Publication Activity Database

    Bildziukevich, Uladzimir; Rárová, L.; Šaman, David; Wimmer, Zdeněk

    2018-01-01

    Roč. 145, FEB 10 (2018), s. 41-50 ISSN 0223-5234 R&D Projects: GA MPO(CZ) FV10599 Institutional support: RVO:61389030 ; RVO:61388963 Keywords : Amide * Betulinic acid * Cytotoxicity * Picolyl amine * Therapeutic index Subject RIV: CC - Organic Chemistry OBOR OECD: Organic chemistry Impact factor: 4.519, year: 2016

  9. Synthesis and characterization of new copoly(amide-imide)s based ...

    African Journals Online (AJOL)

    ... solubility tests and UV-vis spectroscopy. Thermal stabilities of resulted polymers (7a-c) containing three different second diacids were compared by using TGA and DTG thermograms. KEY WORDS: Highperformance polymers, Copoly(amide-imide)s, Direct polycondensation, Thermal properties. Bull. Chem. Soc. Ethiop.

  10. The Preparations and Water Vapor Barrier Properties of Polyimide Films Containing Amide Moieties

    Directory of Open Access Journals (Sweden)

    Kai Zhang

    2017-12-01

    Full Text Available Flexible displays are a systematic revolution in the field of display, in which high-performance and high-barrier polymer substrates are considered to be one of the most important key materials. In this work, high water vapor barrier polyimides containing amide moieties were synthesized via the ternary polymerization of 4,4′-diaminobenzailide (DABA, 4,4′-diaminodipheny ether (ODA, and 3,3′,4,4′-biphenyl-tetracarboxylic acid dianhydride (BPDA followed by thermal imidization. The relationship between the content of amide moieties and the water vapor barrier property of the prepared polyimides was studied by means of density test, water absorbing test, water contact angle test, water vapor permeation test, fourier transform infrared spectroscopy (FT-IR, thermogravimetric analysis (TGA, thermogravimetry coupled with fourier transform infrared spectrometry (TG-FTIR, wide-angle X-ray diffraction analysis (WXRD, mechanical performance test, etc. The results show that the introduction of amide groups into polyimide (PI main chains can improve the water vapor barrier properties of the polyimides effectively. The water vapor transmission rate (WVTR of the polyimide films can be improved from 8.2365 g·(m2·24 h−1 to 0.8670 g·(m2·24 h−1 with the increasing content of amide moieties.

  11. Ruthenium on chitosan: A recyclable heterogeneous catalyst for aqueous hydration of nitriles to amides

    Science.gov (United States)

    Ruthenium has been immobilized over chitosan by simply stirring an aqueous suspension of chitosan in water with ruthenium chloride and has been utilized for the oxidation of nitriles to amides; the hydration of nitriles occurs in high yield and excellent selectivity, which procee...

  12. Process for chemical reaction of amino acids and amides yielding selective conversion products

    Science.gov (United States)

    Holladay, Jonathan E [Kennewick, WA

    2006-05-23

    The invention relates to processes for converting amino acids and amides to desirable conversion products including pyrrolidines, pyrrolidinones, and other N-substituted products. L-glutamic acid and L-pyroglutamic acid provide general reaction pathways to numerous and valuable selective conversion products with varied potential industrial uses.

  13. Indoline Amide Glucosides from Portulaca oleracea: Isolation, Structure, and DPPH Radical Scavenging Activity.

    Science.gov (United States)

    Jiao, Ze-Zhao; Yue, Su; Sun, Hong-Xiang; Jin, Tian-Yun; Wang, Hai-Na; Zhu, Rong-Xiu; Xiang, Lan

    2015-11-25

    A polyamide column chromatography method using an aqueous ammonia mobile phase was developed for large-scale accumulation of water-soluble indoline amide glucosides from a medicinal plant, Portulaca oleracea. Ten new [oleraceins H, I, K, L, N, O, P, Q, R, S (1-10)] and four known [oleraceins A-D (11-14)] indoline amide glucosides were further purified and structurally characterized by various chromatographic and spectroscopic methods. The DPPH radical scavenging activities of oleraceins K (5) and L (6), with EC50 values of 15.30 and 16.13 μM, respectively, were twice that of a natural antioxidant, vitamin C; the EC50 values of the 12 other indoline amides, which ranged from 29.05 to 43.52 μM, were similar to that of vitamin C. Structure-activity relationships indicated that the DPPH radical scavenging activities of these indoline amides correlate with the numbers and positions of the phenolic hydroxy groups.

  14. An efficient and convenient synthesis of N-substituted amides under ...

    Indian Academy of Sciences (India)

    scopic reagents, low yield, tedious product isolation, longer reaction time and competing side reactions. In this paper we wish to report a comprehensive study of the reactions between various organic nitriles and alcohols in the presence of catalytic amount of Al(HSO4)3 to provide N-substituted amides via Ritter fashion.

  15. One pot direct synthesis of amides or oxazolines from carboxylic acids using Deoxo-Fluor reagent.

    Science.gov (United States)

    Kangani, Cyrous O; Kelley, David E

    2005-12-19

    A mild and highly efficient one pot-one step condensation and/or condensation-cyclization of various acids to amides and/or oxazolines using Deoxo-Fluor reagents is described. Parallel syntheses of various free fatty acids with 2-amino-2, 2-dimethyl-1-propanol resulted with excellent yields.

  16. Detonation of Meta-stable Clusters

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, Allen; Kuhl, Allen L.; Fried, Laurence E.; Howard, W. Michael; Seizew, Michael R.; Bell, John B.; Beckner, Vincent; Grcar, Joseph F.

    2008-05-31

    We consider the energy accumulation in meta-stable clusters. This energy can be much larger than the typical chemical bond energy (~;;1 ev/atom). For example, polymeric nitrogen can accumulate 4 ev/atom in the N8 (fcc) structure, while helium can accumulate 9 ev/atom in the excited triplet state He2* . They release their energy by cluster fission: N8 -> 4N2 and He2* -> 2He. We study the locus of states in thermodynamic state space for the detonation of such meta-stable clusters. In particular, the equilibrium isentrope, starting at the Chapman-Jouguet state, and expanding down to 1 atmosphere was calculated with the Cheetah code. Large detonation pressures (3 and 16 Mbar), temperatures (12 and 34 kilo-K) and velocities (20 and 43 km/s) are a consequence of the large heats of detonation (6.6 and 50 kilo-cal/g) for nitrogen and helium clusters respectively. If such meta-stable clusters could be synthesized, they offer the potential for large increases in the energy density of materials.

  17. Co-ordination properties of diglycol-amide (DGA) to trivalent curium and lanthanides studied by XAS, XRD and XPS methods

    International Nuclear Information System (INIS)

    Yaita, T.; Hirata, M.; Narita, H.; Tachimori, S.; Yamamoto, H.; Edelstein, N.M.; Bucher, J.J.; Shuh, D.K.; Rao, L.

    2001-01-01

    Co-ordination properties of diglycol-amide (DGA) to trivalent curium and to the trivalent lanthanides were studied by the EXAFS, the XRD and the XPS methods. The structural determinations by both the crystal XRD and the solution EXAFS methods showed that the DGA co-ordinated to the trivalent lanthanide ion in a tridentate fashion: co-ordination of three oxygen atoms of each ligand to the metal ion. The bond distances of Er-O (carbonyl) and Er-O (ether) in the Er-DGA complex were 2.35 Angstrom, and 2.46 Angstrom, respectively, while the atom distances of Cm-O (carbonyl) and Cm-O (ether) in the Cm-DGA complex were 2.42 Angstrom and 3.94 Angstrom, respectively from the EXAFS data for the Cm-DGA complex. Accordingly, the DGA would behave only as a semi-tridentate in the co-ordination to trivalent curium in solution. We determined the valence band structures of the Er-DGA complex by the XPS in order to clarify the bond properties of the complex, and assigned the XPS spectrum by using the DV-DS molecular orbital calculation method. (authors)

  18. 26 CFR 1.144-1 - Qualified small issue bonds, qualified student loan bonds, and qualified redevelopment bonds.

    Science.gov (United States)

    2010-04-01

    ... student loan bonds, and qualified redevelopment bonds. (a) Overview. Interest on a private activity bond... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Qualified small issue bonds, qualified student loan bonds, and qualified redevelopment bonds. 1.144-1 Section 1.144-1 Internal Revenue INTERNAL...

  19. Peptide Bond Synthesis by a Mechanism Involving an Enzymatic Reaction and a Subsequent Chemical Reaction.

    Science.gov (United States)

    Abe, Tomoko; Hashimoto, Yoshiteru; Zhuang, Ye; Ge, Yin; Kumano, Takuto; Kobayashi, Michihiko

    2016-01-22

    We recently reported that an amide bond is unexpectedly formed by an acyl-CoA synthetase (which catalyzes the formation of a carbon-sulfur bond) when a suitable acid and l-cysteine are used as substrates. DltA, which is homologous to the adenylation domain of nonribosomal peptide synthetase, belongs to the same superfamily of adenylate-forming enzymes, which includes many kinds of enzymes, including the acyl-CoA synthetases. Here, we demonstrate that DltA synthesizes not only N-(d-alanyl)-l-cysteine (a dipeptide) but also various oligopeptides. We propose that this enzyme catalyzes peptide synthesis by the following unprecedented mechanism: (i) the formation of S-acyl-l-cysteine as an intermediate via its "enzymatic activity" and (ii) subsequent "chemical" S → N acyl transfer in the intermediate, resulting in peptide formation. Step ii is identical to the corresponding reaction in native chemical ligation, a method of chemical peptide synthesis, whereas step i is not. To the best of our knowledge, our discovery of this peptide synthesis mechanism involving an enzymatic reaction and a subsequent chemical reaction is the first such one to be reported. This new process yields peptides without the use of a thioesterified fragment, which is required in native chemical ligation. Together with these findings, the same mechanism-dependent formation of N-acyl compounds by other members of the above-mentioned superfamily demonstrated that all members most likely form peptide/amide compounds by using this novel mechanism. Each member enzyme acts on a specific substrate; thus, not only the corresponding peptides but also new types of amide compounds can be formed. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  20. Dentine bond strength and antimicrobial activity evaluation of adhesive systems.

    Science.gov (United States)

    André, Carolina Bosso; Gomes, Brenda Paula Figueiredo Almeida; Duque, Thais Mageste; Stipp, Rafael Nobrega; Chan, Daniel Chi Ngai; Ambrosano, Glaucia Maria Bovi; Giannini, Marcelo

    2015-04-01

    This study evaluated the dentine bond strength (BS) and the antibacterial activity (AA) of six adhesives against strict anaerobic and facultative bacteria. Three adhesives containing antibacterial components (Gluma 2Bond (glutaraldehyde)/G2B, Clearfil SE Protect (MDPB)/CSP and Peak Universal Bond (PUB)/chlorhexidine) and the same adhesive versions without antibacterial agents (Gluma Comfort Bond/GCB, Clearfil SE Bond/CSB and Peak LC Bond/PLB) were tested. The AA of adhesives and control groups was evaluated by direct contact method against four strict anaerobic and four facultative bacteria. After incubation, according to the appropriate periods of time for each microorganism, the time to kill microorganisms was measured. For BS, the adhesives were applied according to manufacturers' recommendations and teeth restored with composite. Teeth (n=10) were sectioned to obtain bonded beams specimens, which were tested after artificial saliva storage for one week and one year. BS data were analyzed using two-way ANOVA and Tukey test. Saliva storage for one year reduces the BS only for GCB. In general G2B and GCB required at least 24h for killing microorganisms. PUB and PLB killed only strict anaerobic microorganisms after 24h. For CSP the average time to eliminate the Streptococcus mutans and strict anaerobic oral pathogens was 30 min. CSB showed no AA against facultative bacteria, but had AA against some strict anaerobic microorganisms. Storage time had no effect on the BS for most of the adhesives. The time required to kill bacteria depended on the type of adhesive and never was less than 10 min. Most of the adhesives showed stable bond strength after one year and the Clearfil SE Protect may be a good alternative in restorative procedures performed on dentine, considering its adequate bond strength and better antibacterial activity. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. METABOLIC ENGINEERING TO DEVELOP A PATHWAY FOR THE SELECTIVE CLEAVAGE OF CARBON-NITROGEN BONDS

    Energy Technology Data Exchange (ETDEWEB)

    John J. Kilbane II

    2004-10-01

    The objective of the project is to develop biochemical pathways for the selective cleavage of C-N bonds in molecules found in petroleum. The initial phase of the project was focused on the isolation or development of an enzyme capable of cleaving the C-N bond in aromatic amides, specifically 2-aminobiphenyl. The objective of the second phase of the research will be to construct a biochemical pathway for the selective removal of nitrogen from carbazole by combining the carA genes from Sphingomonas sp. GTIN11 with the gene(s) encoding an appropriate deaminase. The objective of the final phase of the project will be to develop derivative C-N bond cleaving enzymes that have broader substrate ranges and to demonstrate the use of such strains to selectively remove nitrogen from petroleum. During the first year of the project (October, 2002-September, 2003) enrichment culture experiments resulted in the isolation of microbial cultures that utilize aromatic amides as sole nitrogen sources, several amidase genes were cloned and were included in directed evolution experiments to obtain derivatives that can cleave C-N bonds in aromatic amides, and the carA genes from Sphingomonas sp. GTIN11, and Pseudomonas resinovorans CA10 were cloned in vectors capable of replicating in Escherichia coli. During the second year of the project (October, 2003-September, 2004) enrichment culture experiments succeeded in isolating a mixed bacterial culture that can utilize 2-aminobiphenyl as a sole nitrogen source, directed evolution experiments were focused on the aniline dioxygenase enzyme that is capable of deaminating aniline, and expression vectors were constructed to enable the expression of genes encoding C-N bond cleaving enzymes in Rhodococcus hosts. The construction of a new metabolic pathway to selectively remove nitrogen from carbazole and other molecules typically found in petroleum should lead to the development of a process to improve oil refinery efficiency by reducing the

  2. Both the cis-trans equilibrium and isomerization dynamics of a single proline amide modulate β2-microglobulin amyloid assembly

    Science.gov (United States)

    Torbeev, Vladimir Yu.; Hilvert, Donald

    2013-01-01

    The human protein β2-microglobulin (β2m) aggregates as amyloid fibrils in patients undergoing long-term hemodialysis. Isomerization of Pro32 from its native cis to a nonnative trans conformation is thought to trigger β2m misfolding and subsequent amyloid assembly. To examine this hypothesis, we systematically varied the free-energy profile of proline cis-trans isomerization by replacing Pro32 with a series of 4-fluoroprolines via total chemical synthesis. We show that β2m’s stability, (un)folding, and aggregation properties are all influenced by the rate and equilibrium of Pro32 cis-trans isomerization. As anticipated, the β2m monomer was either stabilized or destabilized by respective incorporation of (2S,4S)-fluoroproline, which favors the native cis amide bond, or the stereoisomeric (2S,4R)-fluoroproline, which disfavors this conformation. However, substitution of Pro32 with 4,4-difluoroproline, which has nearly the same cis-trans preference as proline but an enhanced isomerization rate, caused pronounced destabilization of the protein and increased oligomerization at neutral pH. More remarkably, these subtle alterations in chemical composition—incorporation of one or two fluorine atoms into a single proline residue in the 99 amino acid long protein—modulated the aggregation properties of β2m, inducing the formation of polymorphically distinct amyloid fibrils. These results highlight the importance of conformational dynamics for molecular assembly of an amyloid cross-β structure and provide insights into mechanistic aspects of Pro32 cis-trans isomerism in β2m aggregation. PMID:24262149

  3. Atomically Bonded Transparent Superhydrophobic Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Aytug, Tolga [ORNL

    2015-08-01

    Maintaining clarity and avoiding the accumulation of water and dirt on optically transparent surfaces such as US military vehicle windshields, viewports, periscope optical head windows, and electronic equipment cover glasses are critical to providing a high level of visibility, improved survivability, and much-needed safety for warfighters in the field. Through a combination of physical vapor deposition techniques and the exploitation of metastable phase separation in low-alkali borosilicate, a novel technology was developed for the fabrication of optically transparent, porous nanostructured silica thin film coatings that are strongly bonded to glass platforms. The nanotextured films, initially structurally superhydrophilic, exhibit superior superhydrophobicity, hence antisoiling ability, following a simple but robust modification in surface chemistry. The surfaces yield water droplet contact angles as high as 172°. Moreover, the nanostructured nature of these coatings provides increased light scattering in the UV regime and reduced reflectivity (i.e., enhanced transmission) over a broad range of the visible spectrum. In addition to these functionalities, the coatings exhibit superior mechanical resistance to abrasion and are thermally stable to temperatures approaching 500°C. The overall process technology relies on industry standard equipment and inherently scalable manufacturing processes and demands only nontoxic, naturally abundant, and inexpensive base materials. Such coatings, applied to the optical components of current and future combat equipment and military vehicles will provide a significant strategic advantage for warfighters. The inherent self-cleaning properties of such superhydrophobic coatings will also mitigate biofouling of optical windows exposed to high-humidity conditions and can help decrease repair/replacement costs, reduce maintenance, and increase readiness by limiting equipment downtime.

  4. Tandem ligation of unprotected peptides through thiaprolyl and cysteinyl bonds in water.

    Science.gov (United States)

    Tam, J P; Yu, Q; Yang, J L

    2001-03-21

    Tandem ligation for the synthesis and modification of proteins entails forming two or more regiospecific amide bonds of multiple free peptide segments without a protecting-group scheme. We here describe a semi-orthogonal strategy for ligating three unprotected peptide segments, two of which contain N-terminal (NT) cysteine, to form in tandem two amide bonds, an Xaa-SPro (thiaproline), and then an Xaa-Cys. This strategy exploits the strong preference of an NT-cysteinyl peptide under acidic conditions to undergo selectively an SPro-imine ligation rather than a Cys-thioester ligation. Operationally, it was performed in the N --> C direction, first by an imine ligation at pH glycoaldehyde ester and a second peptide containing both an NT-Cys and a CT-thioester. The newly created O-ester-linked segment with a CT-thioester was then ligated to another NT-cysteinyl peptide through thioester ligation at pH > 7 to form an Xaa-Cys bond. Concurrently, this basic condition also catalyzed the O,N-acyl migration of an Xaa-thiazolidine ester to the Xaa-SPro bond at the first ligation site to complete the tandem three-segment ligation. Both ligation reactions were performed in aqueous buffered solvents. The effectiveness of this three-segment ligation strategy was tested in six peptides ranging from 19 to 70 amino acids, including thiaproline --> proline analogues of somatostatins and two CC-chemokines. The thiaproline replacements in these peptides and proteins did not result in altered biological activity. By eliminating the protecting-group scheme and coupling reagents, tandem ligation of multiple free peptide segments in aqueous solutions enhances the scope of protein synthesis and may provide a useful approach for combinatorial segment synthesis.

  5. Marginally Stable Nuclear Burning

    Science.gov (United States)

    Strohmayer, Tod E.; Altamirano, D.

    2012-01-01

    Thermonuclear X-ray bursts result from unstable nuclear burning of the material accreted on neutron stars in some low mass X-ray binaries (LMXBs). Theory predicts that close to the boundary of stability oscillatory burning can occur. This marginally stable regime has so far been identified in only a small number of sources. We present Rossi X-ray Timing Explorer (RXTE) observations of the bursting, high- inclination LMXB 4U 1323-619 that reveal for the first time in this source the signature of marginally stable burning. The source was observed during two successive RXTE orbits for approximately 5 ksec beginning at 10:14:01 UTC on March 28, 2011. Significant mHz quasi- periodic oscillations (QPO) at a frequency of 8.1 mHz are detected for approximately 1600 s from the beginning of the observation until the occurrence of a thermonuclear X-ray burst at 10:42:22 UTC. The mHz oscillations are not detected following the X-ray burst. The average fractional rms amplitude of the mHz QPOs is 6.4% (3 - 20 keV), and the amplitude increases to about 8% below 10 keV.This phenomenology is strikingly similar to that seen in the LMXB 4U 1636-53. Indeed, the frequency of the mHz QPOs in 4U 1323-619 prior to the X-ray burst is very similar to the transition frequency between mHz QPO and bursts found in 4U 1636-53 by Altamirano et al. (2008). These results strongly suggest that the observed QPOs in 4U 1323-619 are, like those in 4U 1636-53, due to marginally stable nuclear burning. We also explore the dependence of the energy spectrum on the oscillation phase, and we place the present observations within the context of the spectral evolution of the accretion-powered flux from the source.

  6. Effect of three bis-pyridyl-bis-amide ligands with various spacers on the structural diversity of new multifunctional cobalt(II) coordination polymers

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Hong-Yan [Department of Chemistry, Bohai University, Jinzhou 121000 (China); Lu, Huizhe [Department of Applied Chemistry, China Agricultural University, Beijing, 100193 (China); Le, Mao; Luan, Jian [Department of Chemistry, Bohai University, Jinzhou 121000 (China); Wang, Xiu-Li, E-mail: wangxiuli@bhu.edu.cn [Department of Chemistry, Bohai University, Jinzhou 121000 (China); Liu, Guocheng; Zhang, Juwen [Department of Chemistry, Bohai University, Jinzhou 121000 (China)

    2015-03-15

    Three new cobalt(II) coordination polymers [Co{sub 2}(1,4-NDC){sub 2}(3-bpye)(H{sub 2}O)] (1), [Co(1,4-NDC)(3-bpfp)(H{sub 2}O)] (2) and [Co(1,4-NDC)(3-bpcb)] (3) [3-bpye=N,N′-bis(3-pyridinecarboxamide)-1,2-ethane, 3-bpfp=bis(3-pyridylformyl)piperazine, 3-bpcb=N,N′-bis(3-pyridinecarboxamide)-1,4-benzene, and 1,4-H{sub 2}NDC=1,4-naphthalenedicarboxylic acid] have been hydrothermally synthesized. The structures of complexes 1–3 have been determined by X-ray single crystal diffraction analyses and further characterized by infrared spectroscopy (IR), powder X-ray diffraction (PXRD) and thermogravimetric analyses (TGA). Complex 1 is a 3D coordination structure with 8-connected (4{sup 20}.6{sup 8}) topology constructed from 3D [Co{sub 2}(1,4-NDC){sub 2}(H{sub 2}O)]{sub n} framework and bidentate 3-bpye ligands. Complex 2 shows 1D “cage+cage”-like chain formed by 1D [Co{sub 2}(1,4-NDC){sub 2}]{sub n} ribbon chains and [Co{sub 2}(3-bpfp){sub 2}] loops, which are further linked by hydrogen bonding interactions to form a 3D supramolecular network. Complex 3 displays a 3D coordination network with a 6-connected (4{sup 12}.6{sup 3}) topology based on 2D [Co{sub 2}(1,4-NDC){sub 2}]{sub n} layers and bidentate 3-bpcb bridging ligands. The influences of different bis-pyridyl-bis-amide ligands with various spacers on the structures of title complexes are studied. Moreover, the fluorescent properties, electrochemical behaviors and magnetic properties of complexes 1–3 have been investigated. - Graphical abstract: Three multifunctional cobalt(II) complexes constructed from three bis-pyridyl-bis-amide and 1,4-naphthalenedicarboxylic acid have been hydrothermally synthesized and characterized. The fluorescent, electrochemical and magnetic properties of 1–3 have been investigated. - Highlights: • Three multifunctional cobalt(II) complexes based on various bis-pyridyl-bis-amide ligands. • Complex 1 is a 3D coordination structure with 8-connected (4{sup 20}.6{sup 8

  7. Solder extrusion pressure bonding process and bonded products produced thereby

    Science.gov (United States)

    Beavis, Leonard C.; Karnowsky, Maurice M.; Yost, Frederick G.

    1992-01-01

    Production of soldered joints which are highly reliable and capable of surviving 10,000 thermal cycles between about -40.degree. C. and 110.degree. C. Process involves interposing a thin layer of a metal solder composition between the metal surfaces of members to be bonded and applying heat and up to about 1000 psi compression pressure to the superposed members, in the presence of a reducing atmosphere, to extrude the major amount of the solder composition, contaminants including fluxing gases and air, from between the members being bonded, to form a very thin, strong intermetallic bonding layer having a thermal expansion tolerant with that of the bonded members.

  8. Fused electron deficient semiconducting polymers for air stable electron transport

    KAUST Repository

    Onwubiko, Ada

    2018-01-23

    Conventional semiconducting polymer synthesis typically involves transition metal-mediated coupling reactions that link aromatic units with single bonds along the backbone. Rotation around these bonds contributes to conformational and energetic disorder and therefore potentially limits charge delocalisation, whereas the use of transition metals presents difficulties for sustainability and application in biological environments. Here we show that a simple aldol condensation reaction can prepare polymers where double bonds lock-in a rigid backbone conformation, thus eliminating free rotation along the conjugated backbone. This polymerisation route requires neither organometallic monomers nor transition metal catalysts and offers a reliable design strategy to facilitate delocalisation of frontier molecular orbitals, elimination of energetic disorder arising from rotational torsion and allowing closer interchain electronic coupling. These characteristics are desirable for high charge carrier mobilities. Our polymers with a high electron affinity display long wavelength NIR absorption with air stable electron transport in solution processed organic thin film transistors.

  9. Better Bonded Ethernet Load Balancing

    Energy Technology Data Exchange (ETDEWEB)

    Gabler, Jason

    2006-09-29

    When a High Performance Storage System's mover shuttles large amounts of data to storage over a single Ethernet device that single channel can rapidly become saturated. Using Linux Ethernet channel bonding to address this and similar situations was not, until now, a viable solution. The various modes in which channel bonding could be configured always offered some benefit but only under strict conditions or at a system resource cost that was greater than the benefit gained by using channel bonding. Newer bonding modes designed by various networking hardware companies, helpful in such networking scenarios, were already present in their own switches. However, Linux-based systems were unable to take advantage of those new modes as they had not yet been implemented in the Linux kernel bonding driver. So, except for basic fault tolerance, Linux channel bonding could not positively combine separate Ethernet devices to provide the necessary bandwidth.

  10. Continuous feelings of love? The parental bond from pregnancy to toddlerhood.

    Science.gov (United States)

    de Cock, Evi S A; Henrichs, Jens; Vreeswijk, Charlotte M J M; Maas, A Janneke B M; Rijk, Catharina H A M; van Bakel, Hedwig J A

    2016-02-01

    Both prenatal and postnatal parental bonding (i.e., the affective tie from parent to child) have important effects on parental and child functioning. However, research on the continuity and correlates of parental bonding is lacking. Therefore, the goal of the present study was to examine the stability of bonding levels and to explore distinct bonding patterns with a latent class analysis. Moreover, the correlates of these bonding patterns in the parental-, child-, and contextual domain were studied. Levels of maternal (N = 370) and paternal (N = 292) bonding and potential correlates were assessed at 26 weeks of pregnancy, 6 months, and 24 months postpartum. Results showed moderate stability of bonding from pregnancy to toddlerhood. For both mothers and fathers, 4 distinct bonding patterns were found. Parents with low bonding patterns were characterized by increased anxiety and parenting stress, less partner support, less adaptive personality profiles, and children with difficult temperament. These findings indicate the importance of monitoring young children's parents with poor levels of bonding as their bonding patterns remain stable from pregnancy until toddlerhood and because those parents experience problems in multiple domains. (c) 2016 APA, all rights reserved).

  11. Electronic structure and interatomic bonding in Al10V

    International Nuclear Information System (INIS)

    Jahnatek, M; Krajci, M; Hafner, J

    2003-01-01

    On the basis of ab initio calculations we analysed the electron density distribution in the elementary cell of the compound Al 10 V. We found covalent bonding between certain atoms. The Al-V bonds of enhanced covalency are linked into -Al-V-Al-V- chains that extend over the whole crystal. The chains intersect at each V site and together form a Kagome network of corner-sharing tetrahedra. The large voids of this network are filled by Z 16 Friauf polyhedra consisting of Al atoms only. The skeleton of the Friauf polyhedron has the form of a truncated tetrahedron and consists of 12 strongly bonded Al atoms. These Al-Al bonds also have covalent character. The bonding is dominated by sp 2 hybridization. The centre of the Friauf polyhedron may be empty or occupied by an Al atom. The thermodynamic stability of the phase is investigated. The Al 21 V 2 phase with occupied voids is at low temperatures less stable than Al 10 V. The Al 10 V structure can be considered as a special case of the Al 18 Cr 2 Mg 3 structural class. We have found the same picture of bonding as we report here for Al 10 V for several other aluminium-rich alloys belonging to the Al 18 Cr 2 Mg 3 structural class also

  12. What is a hydrogen bond?

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. What is a hydrogen bond? Precise definition of a hydrogen bond is still elusive!1. Several criteria are listed usually for X-H•••Y, X and Y initially thought to be F, O and N only1. Structural: The X-Y bond length is less than the sum of their van der Waals radii. X-H•••Y is ...

  13. Composite interlayer for diffusion bonding

    International Nuclear Information System (INIS)

    1976-01-01

    A ductile interlayer is described, which is useful for transient liquid phase diffusion bonding of metallic articles; the interlayer consisting of a melting point depressant and a plurality of ductile lamellae which are free from carbides, aluminides and borides. The composition and fabrication of the lamellae, and the process for bonding the metallic articles, depend on the composition of the metals to be bonded, and are exemplified in the specification. (U.K.)

  14. A simplified indirect bonding technique

    Directory of Open Access Journals (Sweden)

    Radha Katiyar

    2014-01-01

    Full Text Available With the advent of lingual orthodontics, indirect bonding technique has become an integral part of practice. It involves placement of brackets initially on the models and then their transfer to teeth with the help of transfer trays. Problems encountered with current indirect bonding techniques used are (1 the possibility of adhesive flash remaining around the base of the brackets which requires removal (2 longer time required for the adhesive to gain enough bond strength for secure tray removal. The new simplified indirect bonding technique presented here overcomes both these problems.

  15. Wafer bonding applications and technology

    CERN Document Server

    Gösele, Ulrich

    2004-01-01

    During the past decade direct wafer bonding has developed into a mature materials integration technology. This book presents state-of-the-art reviews of the most important applications of wafer bonding written by experts from industry and academia. The topics include bonding-based fabrication methods of silicon-on-insulator, photonic crystals, VCSELs, SiGe-based FETs, MEMS together with hybrid integration and laser lift-off. The non-specialist will learn about the basics of wafer bonding and its various application areas, while the researcher in the field will find up-to-date information about this fast-moving area, including relevant patent information.

  16. Human Bond Communication

    DEFF Research Database (Denmark)

    Prasad, Ramjee

    2016-01-01

    Modern dexterous communication technology is progressively enabling humans to communicate their information through them with speech (aural) and media (optical) as underpinning essence. Humans realize this kind of aural and optical information by their optical and auditory senses. However, due...... to certain constraints, the ability to incorporate the other three sensory features namely, olfactory, gustatory, and tactile are still far from reality. Human bond communication is a novel concept that incorporates olfactory, gustatory, and tactile that will allow more expressive and holistic sensory...... information exchange through communication techniques for more human sentiment centric communication. This concept endorses the need of inclusion of other three senses and proposes an innovative approach of holistic communication for future communication network....

  17. 30 CFR 281.33 - Bonds and bonding requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Bonds and bonding requirements. 281.33 Section 281.33 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE LEASING OF MINERALS OTHER THAN OIL, GAS, AND SULPHUR IN THE OUTER CONTINENTAL SHELF Financial Considerations § 281.33...

  18. Nanoporous amide networks based on tetraphenyladamantane for selective CO2capture

    KAUST Repository

    Zulfiqar, Sonia

    2016-04-19

    Reduction of anthropogenic CO2 emissions and CO2 separation from post-combustion flue gases are among the imperative issues in the spotlight at present. Hence, it is highly desirable to develop efficient adsorbents for mitigating climate change with possible energy savings. Here, we report the design of a facile one pot catalyst-free synthetic protocol for the generation of three different nitrogen rich nanoporous amide networks (NANs) based on tetraphenyladamantane. Besides the porous architecture, CO2 capturing potential and high thermal stability, these NANs possess notable CO2/N2 selectivity with reasonable retention while increasing the temperature from 273 K to 298 K. The quantum chemical calculations also suggest that CO2 interacts mainly in the region of polar amide groups (-CONH-) present in NANs and this interaction is much stronger than that with N2 thus leading to better selectivity and affirming them as promising contenders for efficient gas separation. © The Royal Society of Chemistry 2016.

  19. Intramolecular migration of amide hydrogens in protonated peptides upon collisional activation

    DEFF Research Database (Denmark)

    Jørgensen, Thomas J D; Gårdsvoll, Henrik; Ploug, Michael

    2005-01-01

    if collision-induced dissociation (CID) should provide reliable site-specific information from (1)H/(2)H exchange experiments. We have explored a series of unique, regioselectively deuterium-labeled peptides as model systems to probe for intramolecular amide hydrogen migration under low-energy collisional...... are protected against exchange with the solvent, while the amide hydrogens of the nonbinding sequences exchange rapidly with the solvent. We have utilized such long-lived complexes to generate peptides labeled with deuterium in either the binding or nonbinding region, and the expected regioselectivity...... of this labeling was confirmed after pepsin proteolysis. CID of such deuterated peptides, [M + 2H](2+), yielded fragment ions (b- and y-ions) having a deuterium content that resemble the theoretical values calculated for 100% scrambling. Thus, complete randomization of all hydrogen atoms attached to nitrogen...

  20. Fatty Amides from Crude Rice Bran Oil as Green Corrosion Inhibitors

    Directory of Open Access Journals (Sweden)

    E. Reyes-Dorantes

    2017-01-01

    Full Text Available Due to its high oil content, this research proposes the use of an agroindustrial byproduct (rice bran as a sustainable option for the synthesis of corrosion inhibitors. From the crude rice bran oil, the synthesis of fatty amide-type corrosion inhibitors was carried out. The corrosion inhibitory capacity of the fatty amides was evaluated on an API X-70 steel using electrochemical techniques such as real-time corrosion monitoring and potentiodynamic polarization curves. As a corrosive medium, a CO2-saturated solution (3.5% NaCl was used at three temperatures (30, 50, and 70°C and different concentrations of inhibitor (0, 5, 10, 25, 50, and 100 ppm. The results demonstrate that the sustainable use of agroindustrial byproducts is a good alternative to the synthesis of environmentally friendly inhibitors with high corrosion inhibition efficiencies.

  1. Chemical constituents from red algae Bostrychia radicans (Rhodomelaceae): new amides and phenolic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Ana Ligia Leandrini de; Silva, Denise B. da; Lopes, Norberto P.; Debonsi, Hosana M. [Universidade de Sao Paulo (FCFRP/USP), Ribeirao Preto, SP (Brazil). Fac. de Ciencias Farmaceuticas de Ribeirao Preto. Dept. de Quimica e Fisica; Yokoya, Nair S., E-mail: hosana@fcfrp.usp.br [Instituto de Botanica, Sao Paulo, SP (Brazil). Secao de Ficologia

    2012-07-01

    This study describes the isolation and structural determination of two amides, isolated for the first time: N,4-dihydroxy-N-(2'-hydroxyethyl)-benzamide (0.019%) and N,4-dihydroxy-N-(2'-hydroxyethyl)-benzeneacetamide (0.023%). These amides, produced by the red macroalgae Bostrychia radicans, had their structures assigned by NMR spectral data and MS analyses. In addition, this chemical study led to the isolation of cholesterol, heptadecane, squalene, trans-phytol, neophytadiene, tetradecanoic and hexadecanoic acids, methyl hexadecanoate and methyl 9-octadecenoate, 4-(methoxymethyl)-phenol, 4-hydroxybenzaldehyde, methyl 4-hydroxybenzeneacetate, methyl 2-hydroxy-3-(4-hydroxyphenyl)-propanoate, hydroquinone, methyl 4-hydroxymandelate, methyl 4-hydroxybenzoate, 4-hydroxybenzeneacetic acid and (4-hydroxyphenyl)-oxo-acetaldehyde. This is the first report concerning these compounds in B. radicans, contributing by illustrating the chemical diversity within the Rhodomelaceae family. (author)

  2. Synthesis and characterization of poly(ester amide from remewable resources through melt polycondensation

    Directory of Open Access Journals (Sweden)

    B. B. Wang

    2014-01-01

    Full Text Available Biodegradable poly(ester amides (PEAs were synthesized from lactic acid and 11-aminoundecanoic acid via melt polycondensation. Molecular weights, chemical structures and thermal properties of the poly(ester amides were characterized in terms of gel permeation chromatography (GPC, Fourier transform infrared spectroscopy (FTIR, 1H nuclear magnetic resonance (1H NMR, differential scanning calorimetry (DSC and thermogravimetric analysis (TGA, respectively. The PEAs have low molecular weights and display a lower cold crystallization temperature as well as smaller crystallinity by comparison with the pure poly(lactic acid (PLA. The incorporation of the 11-aminoundecanoic acid into the PLA chain not only improved the thermal stability but changed the decomposition process.

  3. Mechanical characterization of porous asphalt mixes modified with fatty acid amides -FAA-

    Directory of Open Access Journals (Sweden)

    Vanessa Senior Arrieta

    2017-01-01

    Full Text Available Porous asphalt mixes (PAM, form a special road surface for asphalt pavement structures, have a special particle size distribution that lets infiltrate to the runoff storm water through of it because of its voids content about 20 %. Many researchers conducted studies and have concluded that the use of modified asphalts is completely necessary to design PAM. Organic and chemical additives and special procedures as foamed asphalt have enhanced the performance of PAM, during their service life. This paper is focused on the mechanical characterization of PAM and how the asphalt modified with fatty acid amides, influenced on their behavior and performance. Based on an experimental methodology with laboratory tests aimed at establishing a comparison between porous asphalt mixes, using for its design and production a penetration 60-70 pure asphalt and another one asphalt modified with fatty acid amides.

  4. Safety of intradiscal injection and biocompatibility of polyester amide microspheres in a canine model predisposed to intervertebral disc degeneration

    NARCIS (Netherlands)

    Willems, Nicole; Mihov, George; Grinwis, Guy C M; van Dijk, Maarten; Schumann, Detlef; Bos, Clemens; Strijkers, Gustav J; Dhert, Wouter J A; Meij, Björn P; Creemers, Laura B.; Tryfonidou, Marianna A

    Repair of degenerated intervertebral discs (IVD) might be established via intradiscal delivery of biologic therapies. Polyester amide polymers (PEA) were evaluated for in vitro cytotoxicity and in vivo biocompatibility, and thereafter intradiscal application of PEA microspheres (PEAMs) in a canine

  5. Tissue and plasma concentrations of amidated and glycine-extended glucagon-like peptide I in humans

    DEFF Research Database (Denmark)

    Orskov, C; Rabenhøj, L; Wettergren, A

    1994-01-01

    Using specific radioimmunoassays, we studied the occurrence of amidated and glycine-extended glucagon-like peptide I (GLP-I) molecules in the human small intestine and pancreas and in the circulation system in response to a breakfast meal. Through gel permeation chromatography of extracts...... plasma were 7 +/- 1 and 6 +/- 1 pM, respectively (n = 6). In response to a breakfast meal, the concentration of amidated GLP-I rose significantly amounting to 41 +/- 5 pM 90 min after the meal ingestion, whereas the concentration of glycine-extended GLP-I only rose slightly to a maximum of 10 +/- 1 p......M. Thus, both amidated and glycine-extended GLP-I molecules are produced in the small intestine and in the pancreas in humans. Both amidated and glycine-extended GLP-I are measurable in fasting plasma.(ABSTRACT TRUNCATED AT 250 WORDS)...

  6. N-acetyl lysyltyrosylcysteine amide inhibits myeloperoxidase, a novel tripeptide inhibitor1[S

    OpenAIRE

    Zhang, Hao; Jing, Xigang; Shi, Yang; Xu, Hao; Du, Jianhai; Guan, Tongju; Weihrauch, Dorothee; Jones, Deron W.; Wang, Weiling; Gourlay, David; Oldham, Keith T.; Hillery, Cheryl A.; Pritchard, Kirkwood A.

    2013-01-01

    Myeloperoxidase (MPO) plays important roles in disease by increasing oxidative and nitrosative stress and oxidizing lipoproteins. Here we report N-acetyl lysyltyrosylcysteine amide (KYC) is an effective inhibitor of MPO activity. We show KYC inhibits MPO-mediated hypochlorous acid (HOCl) formation and nitration/oxidation of LDL. Disulfide is the major product of MPO-mediated KYC oxidation. KYC (⩽4,000 μM) does not induce cytotoxicity in bovine aortic endothelial cells (BAECs). KYC inhibits HO...

  7. Plasma-enabled sensing of urea and related amides on polyaniline

    Czech Academy of Sciences Publication Activity Database

    Puliyalil, H.; Slobodian, P.; Sedlacik, M.; Benlikaya, R.; Říha, Pavel; Ostrikov, K.; Cvelbar, U.

    2016-01-01

    Roč. 10, č. 2 (2016), s. 265-272 ISSN 2095-0179 Grant - others:Ministerstvo školství, mládeže a tělovýchovy (MŠMT)(CZ) LO1504 Institutional support: RVO:67985874 Keywords : gas sensing * urea * PANI * amides * plasma Subject RIV: BK - Fluid Dynamics Impact factor: 1.712, year: 2016

  8. Plasma-enabled sensing of urea and related amides on polyaniline

    Czech Academy of Sciences Publication Activity Database

    Puliyalil, H.; Slobodian, P.; Sedlacik, M.; Benlikaya, R.; Říha, Pavel; Ostrikov, K.; Cvelbar, U.

    2016-01-01

    Roč. 10, č. 2 (2016), s. 265-272 ISSN 2095-0179 Grant - others:Ministerstvo školství, mládeže a tělovýchovy (MŠMT)(CZ) LO1504 Institutional support: RVO:67985874 Keywords : gas sensing * urea * PANI * amides * plasma Subject RIV: BK - Fluid Dynamics Impact factor : 1.712, year: 2016

  9. Nitrotriazole- and imidazole-based amides and sulfonamides as antitubercular agents.

    Science.gov (United States)

    Papadopoulou, Maria V; Bloomer, William D; Rosenzweig, Howard S; Arena, Alexander; Arrieta, Francisco; Rebolledo, Joseph C J; Smith, Diane K

    2014-11-01

    Twenty-three 3-nitrotriazole-based and 2-nitroimidazole-based amides and sulfonamides were screened for antitubercular (anti-TB) activity in aerobic Mycobacterium tuberculosis H37Rv by using the BacTiter-Glo (BTG) microbial cell viability assay. In general, 3-nitrotriazole-based sulfonamides demonstrated anti-TB activity, whereas 3-nitrotriazole-based amides and 2-nitroimidazole-based amides and sulfonamides were inactive. Three 3-nitrotriazole-based sulfonamides (compounds 4, 2, and 7) demonstrated 50% inhibitory concentration (IC50), IC90, and MIC values of 0.38, 0.43, and 1.56 μM (compound 4), 0.57, 0.98, and 3.13 μM (compound 2), and 0.79, 0.87, and 3.13 μM (compound 7), respectively. For 3-nitrotriazole-based sulfonamides, anti-TB activity increased with lipophilicity, whereas the one-electron reduction potential (E1/2) did not play a role. 2-Nitroimidazole-based analogs, which were inactive in the BTG assay, were significantly more active in the low-oxygen assay and more active than the 3-nitrotriazoles. All active nitrotriazoles in the BTG assay were similarly active or more potent (lower MIC values) against resistant strains, with the exception of compounds 2, 3, 4, and 8, which demonstrated greater MIC values against isoniazid-resistant strains. Five 3-nitrotriazole-based sulfonamides demonstrated activity in infected murine J774 macrophages, causing log reductions similar to those seen with rifampin. However, some compounds caused toxicity in uninfected macrophages. In conclusion, the classes of 3-nitrotriazole-based amides and sulfonamides merit further investigation as potential antitubercular agents. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  10. Susceptibility of Apis mellifera (Hymenoptera: Apidae) to pellitorine, an amide isolated from Piper tuberculatum (Piperaceae)

    OpenAIRE

    Miranda, José; Hosana Maria Debonsi Navickiene,; Nogueira-Couto, Regina; Sérgio Antônio De Bortoli,; Kato, Massuo; Vanderlan Da Silva Bolzani,; Furlan, Maysa

    2003-01-01

    International audience; The acute toxicity of pellitorine, an amide isolated from Piper tuberculatum (Piperaceae) which is studied as a biopesticide in European corner borer, was evaluated on larvae and newly emerged adults of honeybee Apis mellifera by means of contact and ingestion bioassays. Workers in the larval and adult phase were separated in groups, which received pellitorine in different concentrations. The larvae were maintained in their own original cells, receiving feeding and nor...

  11. Uranium and plutonium extraction by N,N-dialkyl-amides using multistage mixer-settler extractors

    Energy Technology Data Exchange (ETDEWEB)

    Ban, Y.; Hotoku, S.; Tsutsui, N.; Suzuki, A.; Tsubata, Y.; Matsumura, T.

    2016-07-01

    N,N-Dialkyl-amides (mono-amides) are known as extractants for U and Pu, and many studies have been carried out mainly by single-stage batch method. We have focused on two mono amides: N,N-di(2-ethylhexyl)-2,2-dimethylpropanamide (DEHDMPA) and N,N-di(2-ethylhexyl)butanamide (DEHBA), and proposed a multistage extraction process for recovering U and Pu by these mono-amides. A continuous counter-current experiment was carried out to demonstrate the validity of this process. This process consisted of two cycles, and the first cycle and the second cycle employed DEHDMPA and DEHBA as extractants, respectively. The feed solution for the first cycle was 5.1 mol/dm{sup 3} (M) nitric acid containing 0.92 M U, 1.6 mM Pu, and 0.6 mM Np. The raffinate collected in the first cycle was used as the feed for the second cycle. The ratios of U recovered in the U fraction and U-Pu fraction were 99.1% and 0.8%, respectively, and the ratios of U in the used solvents were <0.04%. The ratio of Pu recovered in the U-Pu fraction was 99.7%, and the ratio of Pu in the used solvents was in the order of 10{sup -3} - 10{sup -4}%. The concentration ratio of U with respect to Pu in the U-Pu fraction was 9, and this indicated that Pu was not isolated. The decontamination factor of U with respect to Pu in the U fraction was obtained as 4.5*10{sup 5}. These results supported the validity of the proposed process. (authors)

  12. Interacting Blends of Novel Unsaturated Polyester Amide Resin with Vinyl Acetate

    OpenAIRE

    Patel, H. S.; Panchal, K. K.; Patel, S. R.; Desai, S. N.

    2004-01-01

    Novel unsaturated poly (ester- amide) resins (UPEAs) were prepared by the reaction between an epoxy resin, namely diglycidyl ether of bisphenol–A (DGEBA) and unsaturated aliphatic bisamic acids using a base catalyst. These UPEAs were then blended with a vinyl monomer namely, Vinyl acetate (VA) to produce a homogeneous resin syrup. The curing of these UPEAs-VA resin blends was carried out by using benzoyl peroxide (BPO) as an initiator for the radical polymerization and was monitored by using ...

  13. solid-phase peptide synthesis of isotocin with amide of asparagine ...

    African Journals Online (AJOL)

    Isotocin, a nonapeptide amide, was synthesised on a benzhydryl-resin using the Boc-strategy. Benzyl group was used in the protection of the side-chains of tyrosine, serine and cysteine. Tetralinyl group was used to protect asparagine side-chain. TFMSA-TFA-thioanisole-1,2-ethanedithiol (2:20:2:1 v/v) was used on the ...

  14. Direct Catalytic Asymmetric Mannich-Type Reaction of α-N3 Amide.

    Science.gov (United States)

    Sun, Zhongdong; Weidner, Karin; Kumagai, Naoya; Shibasaki, Masakatsu

    2015-12-01

    An α-N3 7-azaindoline amide serves as a latent enolate to directly engage in an asymmetric Mannich-type reaction with N-thiophosphinoyl imines by the action of a cooperative catalyst. The thus-obtained highly enantioenriched anti-adduct was transformed into β-amino-α-azido acid in high yield by simple acidic treatment. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. A new feruloyl amide derivative from the fruits of Tribulus terrestris.

    Science.gov (United States)

    Zhang, Xiaopo; Wei, Na; Huang, Jian; Tan, Yinfeng; Jin, Dejun

    2012-01-01

    A new feruloyl amide derivative, named tribulusamide C, was isolated from the fruits of Tribulus terrestris. Its structure was determined on the basis of spectroscopic analysis including IR, 1-D-, 2-D-NMR and HR-ESI-MS. The structure of tribulusamide C was characterised by a unit of pyrrolidine-2,5-dione, which distinguished it from other lignanamides previously isolated from the fruits of T. terrestris.

  16. Arg-Phe-amide-like peptides in the primitive nervous systems of coelenterates

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Ebbesen, Ditte Graff

    1985-01-01

    By using immunocytochemistry and radioimmunoassays, several substances resembling vertebrate or invertebrate neuropeptides have been found in the nervous systems of coelenterates. The most abundant neuropeptides were those related to the molluscan neuropeptide Phe-Met-Arg-Phe-amide (FMRFamide......). Of antisera against different fragments of FMRFamide, those against RFamide were superior in recognizing the coelenterate peptide. Incubation of whole mounts with these RFamide antisera visualized the coelenterate nervous system in such a detail as has previously not been possible. By using a radioimmunoassay...

  17. Synthesis of Amidines from Amides Using a Nickel-Catalyzed Decarbonylative Amination through CO Extrusion Intramolecular Recombination Fragment Coupling.

    Science.gov (United States)

    Liu, Xiangqian; Yue, Huifeng; Jia, Jiaqi; Guo, Lin; Rueping, Magnus

    2017-09-04

    A catalytic synthesis of amidines from amides has been established for the first time. The newly developed CO extrusion recombination process takes advantage of an inexpensive nickel(II) catalyst and provides the corresponding amidines with high efficiency. The intramolecular fragment coupling shows excellent chemoselectivity, starts from readily available amides, and provides a valuable alternative amidine synthesis protocol. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Native lignin for bonding fiber boards - evaluation of bonding mechanisms in boards made from laccase-treated fibers of beech (Fagus sylvatica)

    DEFF Research Database (Denmark)

    Felby, Claus; Thygesen, Lisbeth Garbrecht; Sanadi, Anand

    2004-01-01

    The auto-adhesion of beech wood (Fagus sylvatica) fibers can be enhanced by a pretreatment of the fibers with a phenol oxidase enzyme. The mechanism of enzymatic catalyzed bonding is linked to the generation of stable radicals in lignin by oxidation. Fiberboards made from laccase-treated fibers...... indicate that lignin extractives are precipitated on the fiber surfaces. The improved bonding may be related to several factors, linked to a more lignin rich fiber surface, such as surface molecular entanglements and covalent bonding between fibers through cross-linking of radicals. (C) 2004 Published...

  19. Breaking Rules – Making Bonds

    Indian Academy of Sciences (India)

    IAS Admin

    RESONANCE | January 2016. GENERAL | ARTICLE. Breaking Rules – Making Bonds. A G Samuelson. Boron-containing molecules discovered recently have new types of dative bonds between carbenes and borylenes. At the same time, they show that traditional thumb rules regarding acids and bases are no longer valid.

  20. Why are Hydrogen Bonds Directional?

    Indian Academy of Sciences (India)

    Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore,. Karnataka 560 012, India e-mail: ... Lewis succeeded in explaining the 'chemical bonds' that held the neutral molecules together. The covalent bonding has dominated chemistry so much over the last century and most chemists appear ...

  1. O hydrogen bonds in alkaloids

    Indian Academy of Sciences (India)

    An overview of general classification scheme, medicinal importance and crystal structure analysis with emphasis on the role of hydrogen bonding in some alkaloids is presented in this paper. The article is based on a general kind of survey while crystallographic analysis and role of hydrogen bonding are limited to only ...

  2. Distance criterion for hydrogen bond

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Distance criterion for hydrogen bond. In a D-H ...A contact, the D...A distance must be less than the sum of van der Waals Radii of the D and A atoms, for it to be a hydrogen bond.

  3. Why are Hydrogen Bonds Directional?

    Indian Academy of Sciences (India)

    for an interaction to be characterized as a hydro- gen bond but does not provide any rationale for the same. This article reports a rationale for limiting the angle, based on the electron density topology using the quantum theory of atoms in molecules. Electron density topol- ogy for common hydrogen bond donors HF, HCl, ...

  4. Synthesis and thermal degradation characterization of novel poly(phosphazene-aryl amides

    Directory of Open Access Journals (Sweden)

    Z. P. Zhao

    2012-04-01

    Full Text Available New fully aromatic poly(phosphazene-aryl amides were prepared by polycondensation reaction of our synthesized aromatic diamine: 1,1,3,5-tetraphenoxy-4,6-bis(4-aminophenoxyoligocyclotriphosphazene (monomer 1 with terephthaloyl dichloride. Their chemical structure and composition were characterized by elemental analysis, 1H and 31P NMR (Nuclear Magnetic Resonance, and FT-IR (Fourier transform infrared spectroscopy, whereas their thermal degradation properties were determined by DSC (Differential Scanning Calorimetry and TGA (Thermal Gravimertic Analysis techniques. The solid residues of all samples were analysed by FT-IR and SEM (Scanning Electron Microscopy. Compared to conventional PPTA (poly(p-phenylene terephthamide, PPAA (poly(phosphazene-aryl amide shows excellent thermal stability and solubility in polar protic solvents. All poly(phosphazene-aryl amides show two thermal degradation in the temperature range 150–600°C. The monomer 1, due to its structure, shows the first maximum rate of thermal decomposition temperature around 150–350°C, which may be due to the decomposition of the P–O–C bone. Morphology of the solid residues by Scanning Electron Microscope exhibit that the granular of the solid residues gradual disappearance with the increase of monomer 1 content. The surface layer of PPAA solid residues has been grumous, for the syneresis of P–O–P took place.

  5. Substituted Amides of Pyrazine-2-carboxylic acids: Synthesis and Biological Activity

    Directory of Open Access Journals (Sweden)

    Katarina Kralova

    2002-03-01

    Full Text Available Condensation of 6-chloro-, 5-tert-butyl- or 6-chloro-5-tert-butylpyrazine-2-carboxylic acid chloride with ring substituted anilines yielded a series of amides, which were tested for their in vitro antimycobacterial, antifungal and photosynthesis-inhibiting activities. The highest antituberculotic activity (72% inhibition against Mycobacterium tuberculosis and the highest lipophilicity (log P = 6.85 were shown by the 3,5-bistrifluoromethylphenyl amide of 5-tert-butyl-6-chloropyrazine-2-carboxylic acid (2o. The 3-methylphenyl amides of 6-chloro- and 5-tert-butyl-6-chloro-pyrazine-2-carboxylic acid (2d and 2f exhibited only a poor in vitro antifungal effect (MIC = 31.25-500 μmol·dm-3 against all strains tested, although the latter was the most active antialgal compound (IC50 = 0.063 mmol·dm-3. The most active inhibitor of oxygen evolution rate in spinach chloroplasts was the (3,5-bis-trifluoromethylphenylamide of 6-chloropyrazine-2-carboxylic acid (2m, IC50 = 0.026 mmol·dm-3.

  6. Synthesis and evaluation of bile acid amides of [Formula: see text]-cyanostilbenes as anticancer agents.

    Science.gov (United States)

    Agarwal, Devesh S; Singh, Rajnish Prakash; Lohitesh, K; Jha, Prabhat N; Chowdhury, Rajdeep; Sakhuja, Rajeev

    2017-12-13

    A series of amino-substituted [Formula: see text]-cyanostilbene derivatives and their bile acid (cholic and deoxycholic acid) amides were designed and synthesized. A comparative study on the anticancer and antibacterial activity evaluation on the synthesized analogs was carried against the human osteosarcoma (HOS) cancer cell line, and two gram -ve (E. coli and S. typhi) and two gram [Formula: see text]ve (B. subtilis and S. aureus) bacterial strains. All the cholic acid [Formula: see text]-cyanostilbene amides showed an [Formula: see text] in the range 2-13 [Formula: see text] against human osteosarcoma cells (HOS) with the most active analog (6g) possessing an [Formula: see text] of [Formula: see text]. One of the amino-substituted [Formula: see text]-cyanostilbene, 4e, was found to possess an [Formula: see text] of [Formula: see text]. An increase in the number of cells at the sub-[Formula: see text] phase of the cell was observed in the in vitro cell cycle analysis of two most active compounds in the series (4e, 6g) suggesting a clear indication toward induction of apoptotic cascade. With respect to antibacterial screening, amino-substituted [Formula: see text]-cyanostilbenes were found to be more active than their corresponding bile acid amides. The synthesized compounds were also subjected to in silico study to predict their physiochemical properties and drug-likeness score.

  7. On the relationship between NMR-derived amide order parameters and protein backbone entropy changes.

    Science.gov (United States)

    Sharp, Kim A; O'Brien, Evan; Kasinath, Vignesh; Wand, A Joshua

    2015-05-01

    Molecular dynamics simulations are used to analyze the relationship between NMR-derived squared generalized order parameters of amide NH groups and backbone entropy. Amide order parameters (O(2) NH ) are largely determined by the secondary structure and average values appear unrelated to the overall flexibility of the protein. However, analysis of the more flexible subset (O(2) NH  entropy than that reported by the side chain methyl axis order parameters, O(2) axis . A calibration curve for backbone entropy vs. O(2) NH is developed, which accounts for both correlations between amide group motions of different residues, and correlations between backbone and side chain motions. This calibration curve can be used with experimental values of O(2) NH changes obtained by NMR relaxation measurements to extract backbone entropy changes, for example, upon ligand binding. In conjunction with our previous calibration for side chain entropy derived from measured O(2) axis values this provides a prescription for determination of the total protein conformational entropy changes from NMR relaxation measurements. © 2015 Wiley Periodicals, Inc.

  8. Amides from Piper nigrum L. with dissimilar effects on melanocyte proliferation in-vitro.

    Science.gov (United States)

    Lin, Zhixiu; Liao, Yonghong; Venkatasamy, Radhakrishnan; Hider, Robert C; Soumyanath, Amala

    2007-04-01

    Melanocyte proliferation stimulants are of interest as potential treatments for the depigmentary skin disorder, vitiligo. Piper nigrum L. (Piperaceae) fruit (black pepper) water extract and its main alkaloid, piperine (1), promote melanocyte proliferation in-vitro. A crude chloroform extract of P. nigrum containing piperine was more stimulatory than an equivalent concentration of the pure compound, suggesting the presence of other active components. Piperine (1), guineensine (2), pipericide (3), N-feruloyltyramine (4) and N-isobutyl-2E, 4E-dodecadienamide (5) were isolated from the chloroform extract. Their activity was compared with piperine and with commercial piperlongumine (6) and safrole (7), and synthetically prepared piperettine (8), piperlonguminine (9) and 1-(3, 4-methylenedioxyphenyl)-decane (10). Compounds 6-10 either occur in P. nigrum or are structurally related. Compounds 1, 2, 3, 8 and 9 stimulated melanocyte proliferation, whereas 4, 5, 6, 7 and 10 did not. Comparison of structures suggests that the methylenedioxyphenyl function is essential for melanocyte stimulatory activity. Only those compounds also possessing an amide group were active, although the amino component of the amide group and chain linking it to the methylenedioxyphenyl group can vary. P. nigrum, therefore, contains several amides with the ability to stimulate melanocyte proliferation. This finding supports the traditional use of P. nigrum extracts in vitiligo and provides new lead compounds for drug development for this disease.

  9. Chemical bonding of hydrogen molecules to transition metal complexes

    International Nuclear Information System (INIS)

    Kubas, G.J.

    1990-01-01

    The complex W(CO) 3 (PR 3 ) 2 (H 2 ) (CO = carbonyl; PR 3 = organophosphine) was prepared and was found to be a stable crystalline solid under ambient conditions from which the hydrogen can be reversibly removed in vacuum or under an inert atmosphere. The weakly bonded H 2 exchanges easily with D 2 . This complex represents the first stable compound containing intermolecular interaction of a sigma-bond (H-H) with a metal. The primary interaction is reported to be donation of electron density from the H 2 bonding electron pair to a vacant metal d-orbital. A series of complexes of molybdenum of the type Mo(CO)(H 2 )(R 2 PCH 2 CH 2 PR 2 ) 2 were prepared by varying the organophosphine substitutent to demonstrate that it is possible to bond either dihydrogen or dihydride by adjusting the electron-donating properties of the co-ligands. Results of infrared and NMR spectroscopic studies are reported. 20 refs., 5 fig

  10. Chemical bonding of hydrogen molecules to transition metal complexes

    Energy Technology Data Exchange (ETDEWEB)

    Kubas, G.J.

    1990-01-01

    The complex W(CO){sub 3}(PR{sub 3}){sub 2}(H{sub 2}) (CO = carbonyl; PR{sub 3} = organophosphine) was prepared and was found to be a stable crystalline solid under ambient conditions from which the hydrogen can be reversibly removed in vacuum or under an inert atmosphere. The weakly bonded H{sub 2} exchanges easily with D{sub 2}. This complex represents the first stable compound containing intermolecular interaction of a sigma-bond (H-H) with a metal. The primary interaction is reported to be donation of electron density from the H{sub 2} bonding electron pair to a vacant metal d-orbital. A series of complexes of molybdenum of the type Mo(CO)(H{sub 2})(R{sub 2}PCH{sub 2}CH{sub 2}PR{sub 2}){sub 2} were prepared by varying the organophosphine substitutent to demonstrate that it is possible to bond either dihydrogen or dihydride by adjusting the electron-donating properties of the co-ligands. Results of infrared and NMR spectroscopic studies are reported. 20 refs., 5 fig.

  11. SOCIAL BONDING: REGULATION BY NEUROPEPTIDES

    Directory of Open Access Journals (Sweden)

    Claudia eLieberwirth

    2014-06-01

    Full Text Available Affiliative social relationships (e.g., among spouses, family members, and friends play an essential role in human society. These relationships affect psychological, physiological, and behavioral functions. As positive and enduring bonds are critical for the overall well-being of humans, it is not surprising that considerable effort has been made to study the neurobiological mechanisms that underlie social bonding behaviors. The present review details the involvement of the nonapeptides, oxytocin (OT and arginine vasopressin (AVP, in the regulation of social bonding in mammals including humans. In particular, we will discuss the role of OT and AVP in the formation of social bonds between partners of a mating pair as well as between parents and their offspring. Furthermore, the role of OT and AVP in the formation of interpersonal bonding involving trust is also discussed.

  12. Development of analytical method used for the estimation of potassium amide in liquid ammonia at HWP (Tuticorin)

    International Nuclear Information System (INIS)

    Ramanathan, A.V.

    2007-01-01

    Potassium amide in liquid ammonia is used as a homogeneous catalyst in mono-thermal ammonia-hydrogen isotopic chemical exchange process employed for the manufacture of heavy water. Estimation of concentration of potassium amide in liquid ammonia is vital for checking whether it is sufficient for catalysis in isotopic exchange towers or for purification in purifiers in the Heavy Water Plants. This estimation was carried out earlier by the conventional method involving evaporation of ammonia, decomposition of potassium amide with water and titration of liberated ammonia with sulphuric acid. This method has been replaced by a newly developed method involving direct titration of potassium amide in ammonia with ammonium bromide. This new method is based on the principle that ammonium bromide and potassium amide act as acid and base respectively in the non-aqueous solvent medium, liquid ammonia. This method has not only proved to be an alternative method of estimation of potassium amide in liquid ammonia but also has been serving as a developed analytical method, because it is faster (with fewer steps), more accurate, safer (as it excludes the use of corrosive sulphuric acid needed for the conventional method) and more convenient (as it doesn't need specially designed apparatus and inert gas like dry nitrogen used in the conventional method). (author)

  13. Learning Probabilistic Models of Hydrogen Bond Stability from Molecular Dynamics Simulation Trajectories

    KAUST Repository

    Chikalov, Igor

    2011-04-02

    Hydrogen bonds (H-bonds) play a key role in both the formation and stabilization of protein structures. H-bonds involving atoms from residues that are close to each other in the main-chain sequence stabilize secondary structure elements. H-bonds between atoms from distant residues stabilize a protein’s tertiary structure. However, H-bonds greatly vary in stability. They form and break while a protein deforms. For instance, the transition of a protein from a nonfunctional to a functional state may require some H-bonds to break and others to form. The intrinsic strength of an individual H-bond has been studied from an energetic viewpoint, but energy alone may not be a very good predictor. Other local interactions may reinforce (or weaken) an H-bond. This paper describes inductive learning methods to train a protein-independent probabilistic model of H-bond stability from molecular dynamics (MD) simulation trajectories. The training data describes H-bond occurrences at successive times along these trajectories by the values of attributes called predictors. A trained model is constructed in the form of a regression tree in which each non-leaf node is a Boolean test (split) on a predictor. Each occurrence of an H-bond maps to a path in this tree from the root to a leaf node. Its predicted stability is associated with the leaf node. Experimental results demonstrate that such models can predict H-bond stability quite well. In particular, their performance is roughly 20% better than that of models based on H-bond energy alone. In addition, they can accurately identify a large fraction of the least stable H-bonds in a given conformation. The paper discusses several extensions that may yield further improvements.

  14. High precision and stable structures for particle detectors

    CERN Document Server

    Da Mota Silva, S; Hauviller, Claude

    1999-01-01

    The central detectors used in High Energy Physics Experiments require the use of light and stable structures capable of supporting delicate and precise radiation detection elements. These structures need to be highly stable under environmental conditions where external vibrations, high radiation levels, temperature and humidity gradients should be taken into account. Their main design drivers are high dimension and dynamic stability, high stiffness to mass ratio and large radiation length. For most applications, these constraints lead us to choose Carbon Fiber Reinforced Plastics ( CFRP) as structural element. The construction of light and stable structures with CFRP for these applications can be achieved by careful design engineering and further confirmation at the prototyping phase. However, the experimental environment can influence their characteristics and behavior. In this case, theuse of adaptive structures could become a solution for this problem. We are studying structures in CFRP with bonded piezoel...

  15. Dynamical attraction to stable processes

    OpenAIRE

    Fisher, Albert M.; Talet, Marina

    2012-01-01

    We apply dynamical ideas within probability theory, proving an almost-sure invariance principle in log density for stable processes. The familiar scaling property (self-similarity) of the stable process has a stronger expression, that the scaling flow on Skorokhod path space is a Bernoulli flow. We prove that typical paths of a random walk with i.i.d. increments in the domain of attraction of a stable law can be paired with paths of a stable process so that, after applying a non-random regula...

  16. Dentin-bonding agents

    Directory of Open Access Journals (Sweden)

    João Carlos Gomes

    2008-01-01

    Full Text Available New dental restorative materials have been developed to meet not only the functional demands, but esthetics as well, and in the last few years an enormous range of new materials has appeared for use in dentistry. Among them, several adhesive systems, and different operative techniques for each group materials. Therefore, is indispensable for the professional to know about the properties, characteristics, and association of these materials with the dental structures, in order to select and use them correctly. Should conventional self-etching adhesive systems be used? This question encouraged this literature review to be conducted, with the aim of comparing the conventional adhesive systems with the self-etching systems and to look for scientific data that would help professionals to choose which adhesive system to use. When compared to conventional systems, it was noted that the self-etching systems show less sensitivity to technique, especially as regards errors the operator could commit. The self-etching systems, particularly the 2-step type, have shown equivalent values of bond strength, marginal microleakage and performance, therefore, will be an option for direct composite resin restorations in posterior teeth.

  17. Amide and Ester-Functionalized Humic Acid for Fuel Combustion Enhancement

    Science.gov (United States)

    Riggs, Mark

    Humic acid is a class of naturally occurring molecules composed of large sheet-like regions of cyclic aromatic hydrocarbon networks with surface and edge functional groups including phenols, carboxylic acids, and epoxides. These naturally occurring molecules are found in brown coal deposits near lignite formations. Humic acid has gained attention from the scientific community as a precursor for graphene. Graphene is a 2-dimensional honeycomb structure of fully unsaturated carbon atoms that has exceptional material properties and inherent aromaticity. Graphene's incredible properties are matched by the difficulty associated with reproducibly manufacturing it on a large scale. This issue has limited the use of graphene for commercial applications. The polar functional groups of humic acid contribute to the hydrophilic nature of the molecule, limiting its miscibility in any alkyl-based solvent. Surfactants containing long alkyl chains can affect the miscibility of the molecule in an organic solvent. Surfactants are often difficult to remove from the system. It is theorized that alkylation of the functional sites of humic acid can affect the hydrophilic nature of the molecule, and effectively enable its dispersion into organic solvents without simultaneous incorporation of surfactants. This dissertation investigated the amidation and esterification of humic acid molecules extracted from leonardite. The resulting change in the modified humic acid dispersibility in organic solvents and its potential usage as a fuel additive were evaluated. Butyl, hexyl, octyl, and decyl amide-modified and ester-modified humic acids were synthesized. These products were characterized to confirm successful chemical reaction through thermogravimetric analysis, Fourier-transform infrared spectroscopy, and scanning electron microscopy. The decyl-modified humic acids remained suspended in kerosene mixtures for longer than 1 week. Other organo-humic acids showed varying degrees of flocculation

  18. Cognitive adaptations of social bonding in birds.

    Science.gov (United States)

    Emery, Nathan J; Seed, Amanda M; von Bayern, Auguste M P; Clayton, Nicola S

    2007-04-29

    The 'social intelligence hypothesis' was originally conceived to explain how primates may have evolved their superior intellect and large brains when compared with other animals. Although some birds such as corvids may be intellectually comparable to apes, the same relationship between sociality and brain size seen in primates has not been found for birds, possibly suggesting a role for other non-social factors. But bird sociality is different from primate sociality. Most monkeys and apes form stable groups, whereas most birds are monogamous, and only form large flocks outside of the breeding season. Some birds form lifelong pair bonds and these species tend to have the largest brains relative to body size. Some of these species are known for their intellectual abilities (e.g. corvids and parrots), while others are not (e.g. geese and albatrosses). Although socio-ecological factors may explain some of the differences in brain size and intelligence between corvids/parrots and geese/albatrosses, we predict that the type and quality of the bonded relationship is also critical. Indeed, we present empirical evidence that rook and jackdaw partnerships resemble primate and dolphin alliances. Although social interactions within a pair may seem simple on the surface, we argue that cognition may play an important role in the maintenance of long-term relationships, something we name as 'relationship intelligence'.

  19. Parenting stress and parental bonding.

    Science.gov (United States)

    Willinger, Ulrike; Diendorfer-Radner, Gabriela; Willnauer, Ruth; Jörgl, Gudrun; Hager, Veronika

    2005-01-01

    Attachment experiences are thought to be important because of their implications for later development. The authors' aim with the questionnaire-based study was to investigate the differences between recalled parental bonding regarding 4 types of maternal and paternal bonding with respect to experienced parenting stress caused by child characteristics, parent attributes, and life events under the consideration of the child's gender and age. The authors gathered parental bonding behavior data with the German version of the Parental Bonding Instrument (PBI). The authors assessed parenting stress with their German version of the "Parenting Stress Index (PSI)." They found significant differences among 120 mothers grouped in the 4 maternal and the 4 paternal bonding types regarding parenting stress caused by child, maternal bonding: F(5, 113) = 4.13, p = .002, paternal bonding: F(5, 111) = 8.50, p mothers who themselves recalled the "optimal parental bonding type" with respect to the child and parental domain. The authors did not find any significant differences between the 4 maternal, F(5, 113) = 1.25, p = .29, and the 4 paternal, F(5, 111) = 1.87, p = .106, bonding types with respect to the life stress. According to the authors' findings, the representation of attachment relationships seems to have a special impact on the adult's capacity to cope with challenges and stress, either directly or indirectly as an internal working model of attachment. For the clinical practice, these findings seem to recommend the combination of both the PSI and PBI regarding the diagnostic of stressful mother-child system to plan an optimal intervention program.

  20. Killing the Hofstadter butterfly, one bond at a time

    Science.gov (United States)

    Agarwala, Adhip

    2017-01-01

    Electronic bands in a square lattice when subjected to a perpendicular magnetic field form the Hofstadter butterfly pattern. We study the evolution of this pattern as a function of bond percolation disorder (removal or dilution of lattice bonds). With increasing concentration of the bonds removed, the butterfly pattern gets smoothly decimated. However, in this process of decimation, bands develop interesting characteristics and features. For example, in the high disorder limit, some butterfly-like pattern still persists even as most of the states are localized. We also analyze, in the low disorder limit, the effect of percolation on wavefunctions (using inverse participation ratios) and on band gaps in the spectrum. We explain and provide the reasons behind many of the key features in our results by analyzing small clusters and finite size rings. Furthermore, we study the effect of bond dilution on transverse conductivity ( σ xy ). We show that starting from the clean limit, increasing disorder reduces σ xy to zero, even though the strength of percolation is smaller than the classical percolation threshold. This shows that the system undergoes a direct transition from a integer quantum Hall state to a localized Anderson insulator beyond a critical value of bond dilution. We further find that the energy bands close to the band edge are more stable to disorder than at the band center. To arrive at these results we use the coupling matrix approach to calculate Chern numbers for disordered systems. We point out the relevance of these results to signatures in magneto-oscillations.

  1. Direct Bonded Pontic (Laporan Kasus

    Directory of Open Access Journals (Sweden)

    Suhandi Sidjaja

    2015-10-01

    Full Text Available Advanced science and technology in dentistry enable dental practitioners to modified she bonding techniques in tooth replacement. A pontic made of composite resin bonded to etched enamel of the adjacent teeth can be used in the replacement of one missing anterior tooth with a virgin or sowed adpicent tooth. The advantages of this technique include a one visit treatment, cow cost, good esthetics, less side effects and easy repair or rebounding. Clinical evaluation showed a high success rate therefore with a proper diagnosis and a perfect skill of the direct bonded technique this treatment can be used as an alternative restoration.

  2. The chemisorptive bond basic concepts

    CERN Document Server

    Clark, Alfred

    1974-01-01

    The Chemisorptive Bond: Basic Concepts describes the basic concepts of the chemisorptive bond on solid surfaces from the simple analogies with ordinary chemical bonds to the quantum-mechanical approaches.This book is composed of 10 chapters and begins with discussions of simple formulas for correlating measurable quantities in chemisorptions and catalysis. The succeeding chapters deal with theories based on quantum-mechanical principles that describe the mutual interactions of atoms of the solid and foreign atoms on the surface. The remaining chapters consider the possible arrangements

  3. Integration of European Bond Markets

    DEFF Research Database (Denmark)

    Christiansen, Charlotte

    2014-01-01

    I investigate the time variation in the integration of EU government bond markets. The integration is measured by the explanatory power of European factor portfolios for the individual bond markets for each year. The integration of the government bond markets is stronger for EMU than non-EMU memb......-EMU members and stronger for old than new EU members. For EMU countries, the integration is weaker the lower the credit rating is. During the recent crisis periods, the integration is weaker, particularly for EMU countries....

  4. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  5. Bonding effectiveness to different chemically pre-treated dental zirconia.

    Science.gov (United States)

    Inokoshi, Masanao; Poitevin, André; De Munck, Jan; Minakuchi, Shunsuke; Van Meerbeek, Bart

    2014-09-01

    The objective of this study was to evaluate the effect of different chemical pre-treatments on the bond durability to dental zirconia. Fully sintered IPS e.max ZirCAD (Ivoclar Vivadent) blocks were subjected to tribochemical silica sandblasting (CoJet, 3M ESPE). The zirconia samples were additionally pre-treated using one of four zirconia primers/adhesives (Clearfil Ceramic Primer, Kuraray Noritake; Monobond Plus, Ivoclar Vivadent; Scotchbond Universal, 3M ESPE; Z-PRIME Plus, Bisco). Finally, two identically pre-treated zirconia blocks were bonded together using composite cement (RelyX Ultimate, 3M ESPE). The specimens were trimmed at the interface to a cylindrical hourglass and stored in distilled water (7 days, 37 °C), after which they were randomly tested as is or subjected to mechanical ageing involving cyclic tensile stress (10 N, 10 Hz, 10,000 cycles). Subsequently, the micro-tensile bond strength was determined, and SEM fractographic analysis performed. Weibull analysis revealed the highest Weibull scale and shape parameters for the 'Clearfil Ceramic Primer/mechanical ageing' combination. Chemical pre-treatment of CoJet (3M ESPE) sandblasted zirconia using Clearfil Ceramic Primer (Kuraray Noritake) and Monobond Plus (Ivoclar Vivadent) revealed a significantly higher bond strength than when Scotchbond Universal (3M ESPE) and Z-PRIME Plus (Bisco) were used. After ageing, Clearfil Ceramic Primer (Kuraray Noritake) revealed the most stable bond durability. Combined mechanical/chemical pre-treatment, the latter with either Clearfil Ceramic Primer (Kuraray Noritake) or Monobond Plus (Ivoclar Vivadent), resulted in the most durable bond to zirconia. As a standard procedure to durably bond zirconia to tooth tissue, the application of a combined 10-methacryloyloxydecyl dihydrogen phosphate/silane ceramic primer to zirconia is clinically highly recommended.

  6. Strategies To Increase the Thermal Stability of Truly Biomimetic Hydrogels: Combining Hydrophobicity and Directed Hydrogen Bonding

    OpenAIRE

    Yuan, Hongbo; Xu, Jialiang; van Dam, Eliane P.; Giubertoni, Giulia; Rezus, Yves L. A.; Hammink, Roel; Bakker, Huib J.; Zhan, Yong; Rowan, Alan E.; Xing, Chengfen; Kouwer, Paul H. J.

    2017-01-01

    Enhancing the thermal stability of proteins is an important task for protein engineering. There are several ways to increase the thermal stability of proteins in biology, such as greater hydrophobic interactions, increased helical content, decreased occurrence of thermolabile residues, or stable hydrogen bonds. Here, we describe a well-defined polymer based on β-helical polyisocyanotripeptides (TriPIC) that uses biological approaches, including hydrogen bonding and hydrophobic interactions fo...

  7. Definition of a multicentral bond index

    International Nuclear Information System (INIS)

    Giambiagi, M.; Giambiagi, M.S. de; Mundim, K.C.

    1989-01-01

    The tensor character of the first-order density matrix leads to the definition of an MO multicentral bond index for closed-shell systems. It is here applied to three-center bonds. Satisfactory results are obtained for compounds involving 'secondary' bonds, strong and normal hydrogen bonds; the index for the peptide bond is found to be similar to that of strong hydrogen bonds. (author) [pt

  8. Structure elucidation and in vitro cytotoxicity of ochratoxin α amide, a new degradation product of ochratoxin A.

    Science.gov (United States)

    Bittner, Andrea; Cramer, Benedikt; Harrer, Henning; Humpf, Hans-Ulrich

    2015-05-01

    The mycotoxin ochratoxin A is a secondary metabolite occurring in a wide range of commodities. During the exposure of ochratoxin A to white and blue light, a cleavage between the carbon atom C-14 and the nitrogen atom was described. As a reaction product, the new compound ochratoxin α amide has been proposed based on mass spectrometry (MS) experiments. In the following study, we observed that this compound is also formed at high temperatures such as used for example during coffee roasting and therefore represents a further thermal ochratoxin A degradation product. To confirm the structure of ochratoxin α amide, the compound was prepared in large scale and complete structure elucidation via nuclear magnetic resonance (NMR) and MS was performed. Additionally, first studies on the toxicity of ochratoxin α amide were performed using immortalized human kidney epithelial (IHKE) cells, a cell line known to be sensitive against ochratoxin A with an IC50 value of 0.5 μM. Using this system, ochratoxin α amide revealed no cytotoxicity up to concentrations of 50 μM. Thus, these results propose that the thermal degradation of ochratoxin A to ochratoxin α amide might be a detoxification process. Finally, we present a sample preparation and a HPLC-tandem mass spectrometry (HPLC-MS/MS) method for the analysis of ochratoxin α amide in extrudates and checked its formation during the extrusion of artificially contaminated wheat grits at 150 and 180 °C, whereas no ochratoxin α amide was detectable under these conditions.

  9. Adhesives for orthodontic bracket bonding

    Directory of Open Access Journals (Sweden)

    Déborah Daniella Diniz Fonseca

    2010-04-01

    Full Text Available The advent of acid etching, introduced by Buonocore in 1955, brought the possibility of bonding between the bracket base and enamel, contributing to more esthetic and conservative orthodontics. This direct bracket bonding technique has brought benefits such as reduced cost and time in performing the treatment, as well as making it easier to perform oral hygiene. The aim of this study was to conduct a survey of published studies on orthodontic bracket bonding to dental enamel. It was verified that resin composites and glass ionomer are the most studied and researched materials for this purpose. Resin-modified glass ionomer, with its biocompatibility, capacity of releasing fluoride and no need for acid etching on the tooth structure, has become increasingly popular among dentists. However, due to the esthetic and mechanical properties of light polymerizable resin composite, it continues to be one of the adhesives of choice in the bracket bonding technique and its use is widely disseminated.

  10. Hydrogen bonding in tight environments

    DEFF Research Database (Denmark)

    Pirrotta, Alessandro; Solomon, Gemma C.; Franco, Ignacio

    2016-01-01

    The single-molecule force spectroscopy of a prototypical class of hydrogen-bonded complexes is computationally investigated. The complexes consist of derivatives of a barbituric acid and a Hamilton receptor that can form up to six simultaneous hydrogen bonds. The force-extension (F-L) isotherms...... of the host-guest complexes are simulated using classical molecular dynamics and the MM3 force field, for which a refined set of hydrogen bond parameters was developed from MP2 ab initio computations. The F-L curves exhibit peaks that signal conformational changes during elongation, the most prominent...... of which is in the 60-180 pN range and corresponds to the force required to break the hydrogen bonds. These peaks in the F-L curves are shown to be sensitive to relatively small changes in the chemical structure of the host molecule. Thermodynamic insights into the supramolecular assembly were obtained...

  11. Optimal Investment in Structured Bonds

    DEFF Research Database (Denmark)

    Jessen, Pernille; Jørgensen, Peter Løchte

    2012-01-01

    of the article is to provide possible explanations for the puzzle of why small retail investors hold structured bonds. The investment universe consists of a stock index, a risk-free bank account, and a structured bond containing an option written on another index. We apply expected utility maximization......Retail structured products regularly receive much criticism from financial experts but seem to remain popular with investors. This article considers a generic structured product: the principal-protected index-linked note (structured bond), which resembles a portfolio insurance contract. The purpose...... and consider different utility functions and trading strategies. Our results show that investors should include structured bonds in their optimal portfolio only if they cannot access the index underlying the option directly and only if the products then provide sufficient diversification to compensate...

  12. Ligand-enabled ortho-C–H olefination of phenylacetic amides with unactivated alkenes† †Electronic supplementary information (ESI) available: Data for new compounds and experimental procedures. See DOI: 10.1039/c7sc04827k

    Science.gov (United States)

    Lu, Ming-Zhu; Chen, Xing-Rong; Xu, Hui

    2017-01-01

    Although chelation-assisted C–H olefination has been intensely investigated, Pd(ii)-catalyzed C–H olefination reactions are largely restricted to acrylates and styrenes. Here we report a quinoline-derived ligand that enables the Pd(ii)-catalyzed olefination of the C(sp2)–H bond with simple aliphatic alkenes using a weakly coordinating monodentate amide auxiliary. Oxygen is used as the terminal oxidant with catalytic copper as the co-oxidant. A variety of functional groups in the aliphatic alkenes are tolerated. Upon hydrogenation, the ortho-alkylated product can be accessed. The utility of this reaction is also demonstrated by the late-stage diversification of drug molecules. PMID:29675177

  13. Tracking Reactive Water and Hydrogen-Bonding Networks in Photosynthetic Oxygen Evolution.

    Science.gov (United States)

    Barry, Bridgette A; Brahmachari, Udita; Guo, Zhanjun

    2017-08-15

    In oxygenic photosynthesis, photosystem II (PSII) converts water to molecular oxygen through four photodriven oxidation events at a Mn 4 CaO 5 cluster. A tyrosine, YZ (Y161 in the D1 polypeptide), transfers oxidizing equivalents from an oxidized, primary chlorophyll donor to the metal center. Calcium or its analogue, strontium, is required for activity. The Mn 4 CaO 5 cluster and YZ are predicted to be hydrogen bonded in a water-containing network, which involves amide carbonyl groups, amino acid side chains, and water. This hydrogen-bonded network includes amino acid residues in intrinsic and extrinsic subunits. One of the extrinsic subunits, PsbO, is intrinsically disordered. This extensive (35 Å) network may be essential in facilitating proton release from substrate water. While it is known that some proteins employ internal water molecules to catalyze reactions, there are relatively few methods that can be used to study the role of water. In this Account, we review spectroscopic evidence from our group supporting the conclusion that the PSII hydrogen-bonding network is dynamic and that water in the network plays a direct role in catalysis. Two approaches, transient electron paramagnetic resonance (EPR) and reaction-induced FT-IR (RIFT-IR) spectroscopies, were used. The EPR experiments focused on the decay kinetics of YZ• via recombination at 190 K and the solvent isotope, pH, and calcium dependence of these kinetics. The RIFT-IR experiments focused on shifts in amide carbonyl frequencies, induced by photo-oxidation of the metal cluster, and on the isotope-based assignment of bands to internal, small protonated water clusters at 190, 263, and 283 K. To conduct these experiments, PSII was prepared in selected steps along the catalytic pathway, the S n state cycle (n = 0-4). This cycle ultimately generates oxygen. In the EPR studies, S-state dependent changes were observed in the YZ• lifetime and in its solvent isotope effect. The YZ• lifetime depended on

  14. Synthesis and systematic evaluation of symmetric sulfonated centrally C-C bonded cyanine near-infrared dyes for protein labelling

    NARCIS (Netherlands)

    Wal, Van Der Steffen; Kuil, Joeri; Valentijn, A.R.P.M.; Leeuwen, Van Fijs W.B.

    2016-01-01

    The most commonly used near-infrared cyanine dyes contain an aryl ether that is not fully stable towards nucleophiles. Replacement of the aryl ether by a more stable carbon-carbon bond can improve the stability. In this work we have synthesized a series of four negatively-charged symmetrical C-C

  15. Current aspects on bonding effectiveness and stability in adhesive dentistry.

    Science.gov (United States)

    Cardoso, M V; de Almeida Neves, A; Mine, A; Coutinho, E; Van Landuyt, K; De Munck, J; Van Meerbeek, B

    2011-06-01

    adhesive formulation, but also substrate nature must be taken into account to achieve a stable bonding interface, rendering the restorative treatment more predictable in terms of clinical performance. In this review, we analyse the current theoretical and clinical aspects of adhesion to enamel and dentine, and discuss the diverse possibilities to overcome problems which nowadays still challenge clinicians in their achievement of a more stable and effective bond to tooth enamel and dentine. © 2011 Australian Dental Association.

  16. Crystal Structure of Fatty Acid Amide Hydrolase Bound to the Carbamate Inhibitor URB597: Discovery of a Deacylating Water Molecule and Insight into Enzyme Inactivation

    Energy Technology Data Exchange (ETDEWEB)

    Mileni, Mauro; Kamtekar, Satwik; Wood, David C.; Benson, Timothy E.; Cravatt, Benjamin F.; Stevens, Raymond C. (Scripps); (Pfizer)

    2010-08-12

    The endocannabinoid system regulates a wide range of physiological processes including pain, inflammation, and cognitive/emotional states. URB597 is one of the best characterized covalent inhibitors of the endocannabinoid-degrading enzyme fatty acid amide hydrolase (FAAH). Here, we report the structure of the FAAH-URB597 complex at 2.3 {angstrom} resolution. The structure provides insights into mechanistic details of enzyme inactivation and experimental evidence of a previously uncharacterized active site water molecule that likely is involved in substrate deacylation. This water molecule is part of an extensive hydrogen-bonding network and is coordinated indirectly to residues lining the cytosolic port of the enzyme. In order to corroborate our hypothesis concerning the role of this water molecule in FAAH's catalytic mechanism, we determined the structure of FAAH conjugated to a urea-based inhibitor, PF-3845, to a higher resolution (2.4 {angstrom}) than previously reported. The higher-resolution structure confirms the presence of the water molecule in a virtually identical location in the active site. Examination of the structures of serine hydrolases that are non-homologous to FAAH, such as elastase, trypsin, or chymotrypsin, shows a similarly positioned hydrolytic water molecule and suggests a functional convergence between the amidase signature enzymes and serine proteases.

  17. Electrospun Scaffolds from Low Molecular Weight Poly(ester amides Based on Glycolic Acid, Adipic Acid and Odd or Even Diamines

    Directory of Open Access Journals (Sweden)

    Sara Keiko Murase

    2015-05-01

    Full Text Available Electrospinning of regular poly(ester amides (PEAs constituted by glycolic acid, adipic acid and diamines with five and six carbon atoms has been carried out. Selected PEAs were constituted by natural origin products and could be easily prepared by a polycondensation method that avoids tedious protection and deprotection steps usually required for obtaining polymers with a regular sequence. Nevertheless, the synthesis had some limitations that mainly concerned the final low/moderate molecular weight that could be attained. Therefore, it was considered interesting to evaluate if electrospun scaffolds could still be prepared taking also advantage of the capability of PEAs to establish intermolecular hydrogen bonds. Results indicated that the crucial factor was the control of polymer concentration in the electrospun solution, being necessary that this concentration was higher than 40% (w/v. The PEA with the lowest molecular weight (Mw close to 8000 g/mol was the most appropriate to obtain electrospun samples with a circular cross-section since higher molecular sized polymers show solvent retention problems derived from the high viscosity of the electrospun solution that rendered ribbon-like morphologies after the impact of fibers into the collector. The studied PEAs were semicrystalline and biodegradable, as demonstrated by calorimetric and degradation studies. Furthermore, the new scaffolds were able to encapsulate drugs with anti-inflammatory and bacteriostatic activities like ketoprofen. The corresponding release and bactericide activity was evaluated in different media and against different bacteria. Finally, biocompatibility was demonstrated using both fibroblast and epithelial cell lines.

  18. Functional and structural study comparing the C-terminal amidated β-neurotoxin Ts1 with its isoform Ts1-G isolated from Tityus serrulatus venom.

    Science.gov (United States)

    Coelho, V A; Cremonez, C M; Anjolette, F A P; Aguiar, J F; Varanda, W A; Arantes, E C

    2014-06-01

    Mature Ts1, the main neurotoxin from Tityus serrulatus venom, has its C-terminal Cys amidated, while the isolated isoform of Ts1, named Ts1-G, keeps the non-amidated Gly residue at the C-terminal region, allowing the study of the comparative functional importance of amidation at the C-terminal between these two native toxins. Voltage dependent sodium current measurements showed that the affinity of Ts1-G for sodium channels is smaller than that of the mature Ts1, confirming the important role played by the C-terminal amidation in determining Ts1 activity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Synthesis of new fatty acids amides from aminolysis of fatty acid methyl esters (FAMEs); Sintese de novas amidas graxas a partir da aminolise de esteres metilicos

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Carolina R.; Montes D' Oca, Caroline da Ros; Duarte, Rodrigo da C.; Kurz, Marcia H.S.; Primel, Ednei G.; Clementin, Rosilene M.; Villarreyes, Joaquin Ariel M.; Montes D' Oca, Marcelo G., E-mail: dqmdoca@furg.b [Universidade Federal do Rio Grande, RS (Brazil). Escola de Quimica e Alimentos

    2010-07-01

    Recent biochemical and pharmacological studies have led to the characterization of different fatty acid amides as a new family of biologically active lipids. Here, we describe the synthesis of new amides from C16:0, 18:0, 18:1 and 18:1, OH fatty acids (FFA) families with cyclic and acyclic amines and demonstrate for the first time that these compounds produce cytotoxic effects. Application of this method to the synthesis of fatty acid amides was performed using the esters aminolysis as a key step and various carboxylic amides were prepared in good yield from fatty acid methyl esters (FAMEs). (author)

  20. Steric effects in release of amides from linkers in solid-phase synthesis. Molecular mechanics modeling of key step in peptide and combinatorial chemistry

    DEFF Research Database (Denmark)

    Norrby, Per-Ola; Jensen, Knud Jørgen

    2006-01-01

    -lability of the backbone amide linkage (BAL), which releases sec. amides, compared to C-terminal amide anchoring, which releases primary amides, was rationalized by steric relief upon cleavage. Thus, the relative stability of the carbenium ion formed from the linker in the acidolytic release is an insufficient measure...... of the lability of a linkage. In addition, predictions indicated that steric effects from the C-alpha-substituent in a BAL anchored amino acid residue should accelerate the acidolytic release. The finding that steric crowding leads to increased acid-lability will be important for further development and use...

  1. A Two-Step Procedure for the Overall Transamidation of 8-Aminoquinoline Amides Proceeding via the Intermediate N-Acyl-Boc-Carbamates.

    Science.gov (United States)

    Verho, Oscar; Pourghasemi Lati, Monireh; Oschmann, Michael

    2018-04-03

    Herein a two-step strategy for achieving overall transamidation of 8-aminoquinoline amides has been explored. In this protocol, the 8-aminoquinoline amides were first treated with Boc 2 O and DMAP to form the corresponding N-acyl-Boc-carbamates, which were found to be sufficiently reactive to undergo subsequent aminolysis with different amines in the absence of any additional reagents or catalysts. To demonstrate the utility of this approach, it was applied on a number of 8-aminoquinoline amides from the recent C-H functionalization literature, enabling access to a range of elaborate amide derivatives in good to high yields.

  2. LAMMPS Framework for Directional Dynamic Bonding

    DEFF Research Database (Denmark)

    2012-01-01

    and bond types. When breaking bonds, all angular and dihedral interactions involving broken bonds are removed. The framework allows chemical reactions to be modeled, and use it to simulate a simplistic, coarse-grained DNA model. The resulting DNA dynamics illustrates the power of the present framework.......We have extended the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) to support directional bonds and dynamic bonding. The framework supports stochastic formation of new bonds, breakage of existing bonds, and conversion between bond types. Bond formation can be controlled...... to limit the maximal functionality of a bead with respect to various bond types. Concomitant with the bond dynamics, angular and dihedral interactions are dynamically introduced between newly connected triplets and quartets of beads, where the interaction type is determined from the local pattern of bead...

  3. A polarizable QM/MM approach to the molecular dynamics of amide groups solvated in water

    Energy Technology Data Exchange (ETDEWEB)

    Schwörer, Magnus; Wichmann, Christoph; Tavan, Paul, E-mail: tavan@physik.uni-muenchen.de [Lehrstuhl für BioMolekulare Optik, Ludwig-Maximilians Universität München, Oettingenstr. 67, 80538 München (Germany)

    2016-03-21

    The infrared (IR) spectra of polypeptides are dominated by the so-called amide bands. Because they originate from the strongly polar and polarizable amide groups (AGs) making up the backbone, their spectral positions sensitively depend on the local electric fields. Aiming at accurate computations of these IR spectra by molecular dynamics (MD) simulations, which derive atomic forces from a hybrid quantum and molecular mechanics (QM/MM) Hamiltonian, here we consider the effects of solvation in bulk liquid water on the amide bands of the AG model compound N-methyl-acetamide (NMA). As QM approach to NMA we choose grid-based density functional theory (DFT). For the surrounding MM water, we develop, largely based on computations, a polarizable molecular mechanics (PMM) model potential called GP6P, which features six Gaussian electrostatic sources (one induced dipole, five static partial charge distributions) and, therefore, avoids spurious distortions of the DFT electron density in hybrid DFT/PMM simulations. Bulk liquid GP6P is shown to have favorable properties at the thermodynamic conditions of the parameterization and beyond. Lennard-Jones (LJ) parameters of the DFT fragment NMA are optimized by comparing radial distribution functions in the surrounding GP6P liquid with reference data obtained from a “first-principles” DFT-MD simulation. Finally, IR spectra of NMA in GP6P water are calculated from extended DFT/PMM-MD trajectories, in which the NMA is treated by three different DFT functionals (BP, BLYP, B3LYP). Method-specific frequency scaling factors are derived from DFT-MD simulations of isolated NMA. The DFT/PMM-MD simulations with GP6P and with the optimized LJ parameters then excellently predict the effects of aqueous solvation and deuteration observed in the IR spectra of NMA. As a result, the methods required to accurately compute such spectra by DFT/PMM-MD also for larger peptides in aqueous solution are now at hand.

  4. Tuning the bimetallic amide-imide precursor system to make paramagnetic GaMnN nanopowders

    Energy Technology Data Exchange (ETDEWEB)

    Drygas, Mariusz [AGH University of Science and Technology, Faculty of Energy and Fuels, Al. Mickiewicza 30, 30-059 Krakow (Poland); Janik, Jerzy F., E-mail: janikj@agh.edu.pl [AGH University of Science and Technology, Faculty of Energy and Fuels, Al. Mickiewicza 30, 30-059 Krakow (Poland); Musial, Michal [AGH University of Science and Technology, Faculty of Energy and Fuels, Al. Mickiewicza 30, 30-059 Krakow (Poland); Gosk, Jacek [Warsaw University of Technology, Faculty of Physics, Koszykowa 75, 00-662 Warszawa (Poland); Twardowski, Andrzej, E-mail: andrzej.twardowski@fuw.edu.pl [University of Warsaw, Faculty of Physics, Pasteura 5, 02-093 Warszawa (Poland)

    2016-09-01

    A bimetallic molecular system made of gallium (III) tris(dimethyl)amide Ga(NMe{sub 2}){sub 3} and manganese (II) bis(trimethylsilyl)amide Mn[N(SiMe{sub 3}){sub 2}]{sub 2} (Me = CH{sub 3}, fixed initial Mn-content 10 at.%) was subjected to ammonolysis in refluxing/liquid ammonia. Upon isolation at room temperature, the amide-imide mixed metal precursor was pyrolyzed at elevated temperatures under an ammonia flow by two different routes. Route 1 consisted of a direct nitridation at high temperatures of 500, 700 or 900 °C. In route 2, a low temperature pyrolysis at 150 °C was applied prior to nitridation at the same final temperatures as in route 1. All nanopowders were characterized by XRD diffraction, FT-IR spectroscopy, and SEM/EDX microscopy and analysis. Thorough magnetization measurements in function of magnetic field and temperature were carried out with a SQUID magnetometer. In all samples, the paramagnetic phase of GaMnN was accompanied by an antiferromagnetic by-product linked to a Mn-containing species from decomposition and oxidation of Mn-precursor excess. The Mn-contents in the crystalline GaMnN, i.e., Mn-incorporated in GaN crystal lattice, were of the order of 2–3 at.% mostly independent on the nitridation route whereas the latter had a pronounced effect on amounts of the antiferromagnetic by-product. - Highlights: • New bimetallic precursor system for conversion to GaN/Mn nanopowders was designed. • Two conversion routes were applied with precursor nitridation at 500, 700 or 900 °C. • Prepared nanopowders were thoroughly characterized including magnetic measurements. • The major product was the gallium nitride Mn-doped phase GaMnN with 2–3 at.% of Mn.

  5. A polarizable QM/MM approach to the molecular dynamics of amide groups solvated in water.

    Science.gov (United States)

    Schwörer, Magnus; Wichmann, Christoph; Tavan, Paul

    2016-03-21

    The infrared (IR) spectra of polypeptides are dominated by the so-called amide bands. Because they originate from the strongly polar and polarizable amide groups (AGs) making up the backbone, their spectral positions sensitively depend on the local electric fields. Aiming at accurate computations of these IR spectra by molecular dynamics (MD) simulations, which derive atomic forces from a hybrid quantum and molecular mechanics (QM/MM) Hamiltonian, here we consider the effects of solvation in bulk liquid water on the amide bands of the AG model compound N-methyl-acetamide (NMA). As QM approach to NMA we choose grid-based density functional theory (DFT). For the surrounding MM water, we develop, largely based on computations, a polarizable molecular mechanics (PMM) model potential called GP6P, which features six Gaussian electrostatic sources (one induced dipole, five static partial charge distributions) and, therefore, avoids spurious distortions of the DFT electron density in hybrid DFT/PMM simulations. Bulk liquid GP6P is shown to have favorable properties at the thermodynamic conditions of the parameterization and beyond. Lennard-Jones (LJ) parameters of the DFT fragment NMA are optimized by comparing radial distribution functions in the surrounding GP6P liquid with reference data obtained from a "first-principles" DFT-MD simulation. Finally, IR spectra of NMA in GP6P water are calculated from extended DFT/PMM-MD trajectories, in which the NMA is treated by three different DFT functionals (BP, BLYP, B3LYP). Method-specific frequency scaling factors are derived from DFT-MD simulations of isolated NMA. The DFT/PMM-MD simulations with GP6P and with the optimized LJ parameters then excellently predict the effects of aqueous solvation and deuteration observed in the IR spectra of NMA. As a result, the methods required to accurately compute such spectra by DFT/PMM-MD also for larger peptides in aqueous solution are now at hand.

  6. Anti-biofilm Properties of Bacterial Di-Rhamnolipids and Their Semi-Synthetic Amide Derivatives.

    Science.gov (United States)

    Aleksic, Ivana; Petkovic, Milos; Jovanovic, Milos; Milivojevic, Dusan; Vasiljevic, Branka; Nikodinovic-Runic, Jasmina; Senerovic, Lidija

    2017-01-01

    A new strain, namely Lysinibacillus sp. BV152.1 was isolated from the rhizosphere of ground ivy ( Glechoma hederacea L.) producing metabolites with potent ability to inhibit biofilm formation of an important human pathogens Pseudomonas aeruginosa PAO1, Staphylococcus aureus , and Serratia marcescens . Structural characterization revealed di-rhamnolipids mixture containing rhamnose (Rha)-Rha-C10-C10, Rha-Rha-C8-C10, and Rha-Rha-C10-C12 in the ratio 7:2:1 as the active principle. Purified di-rhamnolipids, as well as commercially available di-rhamnolipids (Rha-Rha-C10-C10, 93%) were used as the substrate for the chemical derivatization for the first time, yielding three semi-synthetic amide derivatives, benzyl-, piperidine-, and morpholine. A comparative study of the anti-biofilm, antibacterial and cytotoxic properties revealed that di-Rha from Lysinibacillus sp. BV152.1 were more potent in biofilm inhibition, both cell adhesion and biofilm maturation, than commercial di-rhamnolipids inhibiting 50% of P. aeruginosa PAO1 biofilm formation at 50 μg mL -1 and 75 μg mL -1 , respectively. None of the di-rhamnolipids exhibited antimicrobial properties at concentrations of up to 500 μg mL -1 . Amide derivatization improved inhibition of biofilm formation and dispersion activities of di-rhamnolipids from both sources, with morpholine derivative being the most active causing more than 80% biofilm inhibition at concentrations 100 μg mL -1 . Semi-synthetic amide derivatives showed increased antibacterial activity against S. aureus , and also showed higher cytotoxicity. Therefore, described di-rhamnolipids are potent anti-biofilm agents and the described approach can be seen as viable approach in reaching new rhamnolipid based derivatives with tailored biological properties.

  7. Topology of electron charge density for chemical bonds from valence bond theory: a probe of bonding types.

    Science.gov (United States)

    Zhang, Lixian; Ying, Fuming; Wu, Wei; Hiberty, Philippe C; Shaik, Sason

    2009-01-01

    To characterize the nature of bonding we derive the topological properties of the electron charge density of a variety of bonds based on ab initio valence bond methods. The electron density and its associated Laplacian are partitioned into covalent, ionic, and resonance components in the valence bond spirit. The analysis provides a density-based signature of bonding types and reveals, along with the classical covalent and ionic bonds, the existence of two-electron bonds in which most of the bonding arises from the covalent-ionic resonance energy, so-called charge-shift bonds. As expected, the covalent component of the Laplacian at the bond critical point is found to be largely negative for classical covalent bonds. In contrast, for charge-shift bonds, the covalent part of the Laplacian is small or positive, in agreement with the weakly attractive or repulsive character of the covalent interaction in these bonds. On the other hand, the resonance component of the Laplacian is always negative or nearly zero, and it increases in absolute value with the charge-shift character of the bond, in agreement with the decrease of kinetic energy associated with covalent-ionic mixing. A new interpretation of the topology of the total density at the bond critical point is proposed to characterize covalent, ionic, and charge-shift bonding from the density point of view.

  8. Kinetics of the mechanochemical synthesis of alkaline-earth metal amides

    Science.gov (United States)

    Garroni, Sebastiano; Takacs, Laszlo; Leng, Haiyan; Delogu, Francesco

    2014-07-01

    A phenomenological framework is developed to model the kinetics of the formation of alkaline-earth metal amides by the ball milling induced reaction of their hydrides with gaseous ammonia. It is shown that the exponential character of the kinetic curves is modulated by the increase of the total volume of the powder inside the reactor due to the substantially larger molar volume of the products compared to the reactants. It is claimed that the volume of powder effectively processed during each collision connects the transformation rate to the physical and chemical processes underlying the mechanochemical transformations.

  9. Rapid and accurate processing method for amide proton exchange rate measurement in proteins

    International Nuclear Information System (INIS)

    Koskela, Harri; Heikkinen, Outi; Kilpelaeinen, Ilkka; Heikkinen, Sami

    2007-01-01

    Exchange between protein backbone amide hydrogen and water gives relevant information about solvent accessibility and protein secondary structure stability. NMR spectroscopy provides a convenient tool to study these dynamic processes with saturation transfer experiments. Processing of this type of NMR spectra has traditionally required peak integration followed by exponential fitting, which can be tedious with large data sets. We propose here a computer-aided method that applies inverse Laplace transform in the exchange rate measurement. With this approach, the determination of exchange rates can be automated, and reliable results can be acquired rapidly without a need for manual processing

  10. Mechanistic Investigation of the Ruthenium–N-Heterocyclic-Carbene-Catalyzed Amidation of Alcohols and Amines

    DEFF Research Database (Denmark)

    Makarov, Ilya; Fristrup, Peter; Madsen, Robert

    2012-01-01

    The mechanism of the ruthenium–N-heterocyclic-carbene-catalyzed formation of amides from alcohols and amines was investigated by experimental techniques (Hammett studies, kinetic isotope effects) and by a computational study by using dispersion-corrected density functional theory (DFT/ M06......, but that it is one of several slow steps in the catalytic cycle. Rapid scrambling of hydrogen and deuterium at the a position of the alcohol was observed with deuterium-labeled substrates, which implies that the catalytically active species is a ruthenium dihydride. The experimental results were supported...

  11. Synthesis of Peptide Amides using Sol-Gel Immobilized Alcalase in Batch and Continuous Reaction System

    OpenAIRE

    L. N. Corîci; A. E. Frissen; D -J. Van Zoelen; I. F. Eggen; F. Peter; C. M. Davidescu; C. G. Boeriu

    2011-01-01

    Two commercial proteases from Bacillus licheniformis (Alcalase 2.4 L FG and Alcalase 2.5 L, Type DX) were screened for the production of Z-Ala-Phe-NH2 in batch reaction. Alcalase 2.4 L FG was the most efficient enzyme for the C-terminal amidation of Z-Ala-Phe-OMe using ammonium carbamate as ammonium source. Immobilization of protease has been achieved by the sol-gel method, using dimethyldimethoxysilane (DMDMOS) and tetramethoxysilane (TMOS) as precursors (unpublished res...

  12. Ethyl malonate amides: a diketo acid offspring fragment for HIV integrase inhibition.

    Science.gov (United States)

    Serafin, Katarzyna; Mazur, Pawel; Bak, Andrzej; Laine, Elodie; Tchertanov, Luba; Mouscadet, Jean-François; Polanski, Jaroslaw

    2011-08-15

    While searching for new HIV integrase inhibitors we discovered that some ethyl malonate amides (EMA) are active against this enzyme. Surprisingly, the main function can only very rarely be found among the reported drug candidates. We synthesised a series of compounds in order to establish and analyse the structure-activity relationship. The similarity to the important classes of HIV integrase inhibitors as well as the synthetic availability of the different targets including this pharmacophore makes EMA compounds an interesting object of investigations. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Methods for attaching polymerizable ceragenins to water treatment membranes using amine and amide linkages

    Science.gov (United States)

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D.T.; Savage, Paul B.

    2013-10-15

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  14. Kinetic Modification on Hydrogen Desorption of Lithium Hydride and Magnesium Amide System

    OpenAIRE

    Miyaoka, Hiroki; Wang, Yongming; Hino, Satoshi; Isobe, Shigehito; Tokoyoda, Kazuhiko; Ichikawa, Takayuki; Kojima, Yoshitsugu

    2015-01-01

    Various synthesis and rehydrogenation processes of lithium hydride (LiH) and magnesium amide (Mg(NH2)2) system with 8:3 molar ratio are investigated to understand the kinetic factors and effectively utilize the essential hydrogen desorption properties. For the hydrogen desorption with a solid-solid reaction, it is expected that the kinetic properties become worse by the sintering and phase separation. In fact, it is experimentally found that the low crystalline size and the close contact of L...

  15. Recombinant production of peptide C-terminal α-amides using an engineered intein

    DEFF Research Database (Denmark)

    Albertsen, Louise; Shaw, Allan C; Norrild, Jens Chr.

    2013-01-01

    of the 198 amino acid intein with an eight amino acid linker. The optimized intein construct was used to produce the PYY derivative under high cell density cultivation conditions, generating the peptide thioester precursor in good yields and subsequent amidation provided the target peptide.......Peptides are of increasing interest as therapeutics in a wide range of diseases, including metabolic diseases such as diabetes and obesity. In the latter, peptide hormones such as peptide YY (PYY) and pancreatic peptide (PP) are important templates for drug design. Characteristic for these peptides...

  16. Mixed quantum-classical dynamics of an amide-I vibrational excitation in a protein α -helix

    Science.gov (United States)

    Freedman, Holly; Martel, Paulo; Cruzeiro, Leonor

    2010-11-01

    Adenosine triphosphate (ATP) is known to be the main energy currency of the living cell, and is used as a coenzyme to generate energy for many cellular processes through hydrolysis to adenosine diphosphate (ADP), although the mechanism of energy transfer is not well understood. It has been proposed that following hydrolysis of the ATP cofactor bound to a protein, up to two quanta of amide-I vibrational energy are excited and utilized to bring about important structural changes in the protein. To study whether, and how, amide-I vibrational excitations are capable of leading to protein structural changes, we have added components arising from quantum-mechanical amide-I vibrational excitations to the total energy and force terms within a molecular-dynamics simulation. This model is applied to helical deca-alanine as a test case to investigate how its dynamics differs in the presence or absence of an amide-I excitation. We find that the presence of an amide-I excitation can bias the structure toward a more helical state.

  17. Studies on novel interpenetrating networks of urethane modified poly(ester-amide and vinyl ester of bisphenol-C

    Directory of Open Access Journals (Sweden)

    Pragnesh N. Dave

    2016-05-01

    Full Text Available Bisphthalamic acids were prepared by reaction of maleic anhydride and aromatic diamines. Novel poly(ester-amides (PEAs were prepared by reaction of DGEBF with bisphthalamic acids. Acrylation of PEAs was carried out using acryloyl chloride; products are called acrylated poly(ester-amides (APEAs. Epoxy resin based unsaturated poly(ester-amide resins (UPEAs can be prepared by many methods but here these were prepared by reported method. These UPEAs were then treated with acryloyl chloride to afford acrylated UPEAs resin (i.e. AUPEAs. Interpenetrating networks of equal proportional urethane modified poly(ester-amide and acrylated poly(ester-amide and vinyl ester of biaphenol c (VE resin were prepared. Urethane modified APEAs and AUPEAs were characterized by elemental analysis, molecular weight was determined by vapor pressure osmometer and by IR spectral study and by thermogravimetry. Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA.

  18. Substitution of terminal amide with 1H-1,2,3-triazole: Identification of unexpected class of potent antibacterial agents.

    Science.gov (United States)

    Bi, Fangchao; Ji, Shengli; Venter, Henrietta; Liu, Jingru; Semple, Susan J; Ma, Shutao

    2018-03-01

    3-Methoxybenzamide (3-MBA) derivatives have been identified as novel class of potent antibacterial agents targeting the bacterial cell division protein FtsZ. As one of isosteres for the amide group, 1,2,3-triazole can mimic the topological and electronic features of the amide, which has gained increasing attention in drug discovery. Based on these considerations, we prepared a series of 1H-1,2,3-triazole-containing 3-MBA analogues via isosteric replacement of the terminal amide with triazole, which had increased antibacterial activity. This study demonstrated the possibility of developing the 1H-1,2,3-triazole group as a terminal amide-mimetic element which was capable of both keeping and modulating amide-related bioactivity. Surprisingly, a different action mode of these new 1H-1,2,3-triazole-containing analogues was observed, which could open new opportunities for the development of antibacterial agents. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. Shelf-Stable Food Safety

    Science.gov (United States)

    ... is an MRE? Is an MRE shelf stable? What foods are packaged in retort packages? What is aseptic ... type of package is used for aseptic processing? What foods are packaged in aseptic packages? Can I microwave ...

  20. Pharmaceuticals labelled with stable isotopes

    International Nuclear Information System (INIS)

    Krumbiegel, P.

    1986-11-01

    The relatively new field of pharmaceuticals labelled with stable isotopes is reviewed. Scientific, juridical, and ethical questions are discussed concerning the application of these pharmaceuticals in human medicine. 13 C, 15 N, and 2 H are the stable isotopes mainly utilized in metabolic function tests. Methodical contributions are given to the application of 2 H, 13 C, and 15 N pharmaceuticals showing new aspects and different states of development in the field under discussion. (author)

  1. Stable isotope research pool inventory

    International Nuclear Information System (INIS)

    1984-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56

  2. Crystal structure of an unknown solvate of {2,2′-[ethane-1,2-diylbis(nitrilo­methanylyl­idene)]diphenolato-κ4 O,N,N′,O′}(N-ferrocenylisonicotinamide-κN 1)cobalt(II): a CoII–salen complex that forms hydrogen-bonded dimers

    Science.gov (United States)

    Brautigam, Bryan; Herholdt, Chelsea; Farnsworth, William; Brudi, Ellen; McDonald, Eric; Wu, Guang; Contakes, Stephen

    2015-01-01

    The title compound, [CoFe(C5H5)(C16H14N2O2)(C11H9N2O)], was prepared as an air-stable red–brown solid by mixing equimolar amounts of {2,2′-[ethane-1,2-diylbis(nitrilo­methanylyl­idene)]diphenolato}cobalt(II) and N-ferrocenylisonicotinamide in dry di­chloro­methane under nitro­gen and was characterized by ESI–MS, IR, and single-crystal X-ray diffraction. The structure at 100 K has triclinic (P-1) symmetry and indicates that the complex crystallizes as a mixture of λ and δ conformers. It exhibits the expected square pyramidal geometry about Co, and forms hydrogen-bonded dimers through amide N—H groups and phenolate O atoms on an adjacent mol­ecule. The involvement of only half of the salen ring structure in hydrogen-bonding inter­actions results in slight folding of the salen ring away from the pyridine coordination site in the δ conformer with an inter-salicyl­idene fold angle of 9.9 (7)°. In contrast, the λ conformer is nearly planar. The dimers pack into an open structure containing channels filled with highly disordered solvent mol­ecules. These solvent molecules’ contributions to the intensity data were removed with the SQUEEZE procedure [Spek (2015). Acta Cryst. C71, 9–18] available in PLATON. PMID:26396858

  3. "Vibrational bonding": a new type of chemical bond is discovered.

    Science.gov (United States)

    Rhodes, Christopher J; Macrae, Roderick M

    2015-01-01

    A long-sought but elusive new type of chemical bond, occurring on a minimum-free, purely repulsive potential energy surface, has recently been convincingly shown to be possible on the basis of high-level quantum-chemical calculations. This type of bond, termed a vibrational bond, forms because the total energy, including the dynamical energy of the nuclei, is lower than the total energy of the dissociated products, including their vibrational zero-point energy. For this to be the case, the ZPE of the product molecule must be very high, which is ensured by replacing a conventional hydrogen atom with its light isotope muonium (Mu, mass = 1/9 u) in the system Br-H-Br, a natural transition state in the reaction between Br and HBr. A paramagnetic species observed in the reaction Mu +Br2 has been proposed as a first experimental sighting of this species, but definitive identification remains challenging.

  4. A facile route for irreversible bonding of plastic-PDMS hybrid microdevices at room temperature.

    Science.gov (United States)

    Tang, Linzhi; Lee, Nae Yoon

    2010-05-21

    Plastic materials do not generally form irreversible bonds with poly(dimethylsiloxane) (PDMS) regardless of oxygen plasma treatment and a subsequent thermal process. In this paper, we perform plastic-PDMS bonding at room temperature, mediated by the formation of a chemically robust amine-epoxy bond at the interfaces. Various plastic materials, such as poly(methylmethacrylate) (PMMA), polycarbonate (PC), polyimide (PI), and poly(ethylene terephthalate) (PET) were adopted as choices for plastic materials. Irrespective of the plastic materials used, the surfaces were successfully modified with amine and epoxy functionalities, confirmed by the surface characterizations such as water contact angle measurements and X-ray photoelectron spectroscopy (XPS), and chemically robust and irreversible bonding was successfully achieved within 1 h at room temperature. The bonding strengths of PDMS with PMMA and PC sheets were measured to be 180 and 178 kPa, respectively, and their assemblies containing microchannel structures endured up to 74 and 84 psi (510 and 579 kPa) of introduced compressed air, respectively, without destroying the microdevices, representing a robust and highly stable interfacial bonding. In addition to microchannel-molded PDMS bonded with flat plastic substrates, microchannel-embossed plastics were also bonded with a flat PDMS sheet, and both types of bonded assemblies displayed sufficiently robust bonding, tolerating an intense influx of liquid whose per-minute injection volume was nearly 1000 to 2000 times higher than the total internal volume of the microchannel used. In addition to observing the bonding performance, we also investigated the potential of surface amine and epoxy functionalities as durable chemical adhesives by observing their storage-time-dependent bonding performances.

  5. H2XP:OH2 Complexes: Hydrogen vs. Pnicogen Bonds

    Directory of Open Access Journals (Sweden)

    Ibon Alkorta

    2016-02-01

    Full Text Available A search of the Cambridge Structural Database (CSD was carried out for phosphine-water and arsine-water complexes in which water is either the proton donor in hydrogen-bonded complexes, or the electron-pair donor in pnicogen-bonded complexes. The range of experimental P-O distances in the phosphine complexes is consistent with the results of ab initio MP2/aug’-cc-pVTZ calculations carried out on complexes H2XP:OH2, for X = NC, F, Cl, CN, OH, CCH, H, and CH3. Only hydrogen-bonded complexes are found on the H2(CH3P:HOH and H3P:HOH potential surfaces, while only pnicogen-bonded complexes exist on H2(NCP:OH2, H2FP:OH2, H2(CNP:OH2, and H2(OHP:OH2 surfaces. Both hydrogen-bonded and pnicogen-bonded complexes are found on the H2ClP:OH2 and H2(CCHP:OH2 surfaces, with the pnicogen-bonded complexes more stable than the corresponding hydrogen-bonded complexes. The more electronegative substituents prefer to form pnicogen-bonded complexes, while the more electropositive substituents form hydrogen-bonded complexes. The H2XP:OH2 complexes are characterized in terms of their structures, binding energies, charge-transfer energies, and spin-spin coupling constants 2hJ(O-P, 1hJ(H-P, and 1J(O-H across hydrogen bonds, and 1pJ(P-O across pnicogen bonds.

  6. 27 CFR 19.516 - Bond account.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bond account. 19.516... Determination and Payment of Tax § 19.516 Bond account. Where the proprietor has furnished a withdrawal or unit... maximum penal sum, he shall maintain an account of his bond and he shall charge the bond with the amount...

  7. Common Factors in International Bond Returns

    NARCIS (Netherlands)

    Driessen, J.J.A.G.; Melenberg, B.; Nijman, T.E.

    2000-01-01

    In this paper we estimate and interpret the factors that jointly determine bond returns of different maturities in the US, Germany and Japan.We analyze both currency-hedged and unhedged bond returns.For currency-hedged bond returns, we find that five factors explain 96.5% of the variation of bond

  8. Three methods to measure RH bond energies

    Energy Technology Data Exchange (ETDEWEB)

    Berkowitz, J. [Argonne National Lab., IL (United States); Ellison, G.B. [Univ. of Colorado, Boulder, CO (United States). Dept. of Chemistry and Biochemistry; Gutman, D. [Catholic Univ. of America, Washington, DC (United States). Dept. of Chemistry

    1993-03-21

    In this paper the authors compare and contrast three powerful methods for experimentally measuring bond energies in polyatomic molecules. The methods are: radical kinetics; gas phase acidity cycles; and photoionization mass spectroscopy. The knowledge of the values of bond energies are a basic piece of information to a chemist. Chemical reactions involve the making and breaking of chemical bonds. It has been shown that comparable bonds in polyatomic molecules, compared to the same bonds in radicals, can be significantly different. These bond energies can be measured in terms of bond dissociation energies.

  9. Three methods to measure RH bond energies

    International Nuclear Information System (INIS)

    Berkowitz, J.; Ellison, G.B.; Gutman, D.

    1993-01-01

    In this paper the authors compare and contrast three powerful methods for experimentally measuring bond energies in polyatomic molecules. The methods are: radical kinetics; gas phase acidity cycles; and photoionization mass spectroscopy. The knowledge of the values of bond energies are a basic piece of information to a chemist. Chemical reactions involve the making and breaking of chemical bonds. It has been shown that comparable bonds in polyatomic molecules, compared to the same bonds in radicals, can be significantly different. These bond energies can be measured in terms of bond dissociation energies

  10. Low temperature anodic bonding to silicon nitride

    DEFF Research Database (Denmark)

    Weichel, Steen; Reus, Roger De; Bouaidat, Salim

    2000-01-01

    Low-temperature anodic bonding to stoichiometric silicon nitride surfaces has been performed in the temperature range from 3508C to 4008C. It is shown that the bonding is improved considerably if the nitride surfaces are either oxidized or exposed to an oxygen plasma prior to the bonding. Both bulk...... and thin-film glasses were used in the bonding experiments. Bond quality was evaluated using a tensile test on structured dies. The effect of oxygen-based pre-treatments of the nitride surface on the bond quality has been evaluated. Bond strengths up to 35 Nrmm2 and yields up to 100% were obtained....

  11. Deriving the bond pricing equation

    Directory of Open Access Journals (Sweden)

    Kožul Nataša

    2014-01-01

    Full Text Available Given the recent focus on Eurozone debt crisis and the credit rating downgrade not only of US debt, but that of other countries and many UK major banking institutions, this paper aims to explain the concept of bond yield, its different measures and bond pricing equation. Yields on capital market instruments are rarely quoted on the same basis, which makes direct comparison between different as investment choices impossible. Some debt instruments are quoted on discount basis, whilst coupon-bearing ones accrue interest differently, offer different compounding opportunities, have different coupon payment frequencies, and manage non-business day maturity dates differently. Moreover, rules governing debt vary across countries, markets and currencies, making yield calculation and comparison a rather complex issue. Thus, some fundamental concepts applicable to debt instrument yield measurement, with focus on bond equation, are presented here. In addition, bond equation expressed in annuity form and used to apply Newton-Raphson algorithm to derive true bond yield is also shown.

  12. Infrared spectroscopy of the amide I mode of N-methylacetamide in solid hydrogen at 2-4 K.

    Science.gov (United States)

    Paulson, Leif O; Anderson, David T

    2011-11-24

    We report high-resolution (0.05 cm(-1)) FTIR spectra of the fundamental and first overtone of the amide I mode of trans-N-methylacetamide (NMA) trapped in solid molecular hydrogen (SMH) at cryogenic temperatures with low (0.03%) and high (55%) ortho-hydrogen (oH(2)) concentrations. NMA-doped SMH samples with high oH(2) concentrations are nearly free from inhomogeneous broadening, permitting the measured amide I homogeneous line width of 1.268(8) cm(-1) to be used to place a lower limit on the vibrational lifetime of 4.19(3) ps. Direct observation of the amide I overtone allows the harmonic vibrational frequency ω(e) = 1726.6(5) cm(-1) and the anharmonicity constant ω(e)x(e) = 8.5(2) cm(-1) to be determined for NMA isolated in SMH samples with low oH(2) concentrations. © 2011 American Chemical Society

  13. How Secondary and Tertiary Amide Moieties are Molecular Stations for Dibenzo-24-crown-8 in [2]Rotaxane Molecular Shuttles?

    Directory of Open Access Journals (Sweden)

    Benjamin Riss-Yaw

    2017-11-01

    Full Text Available Interlocked molecular machines like [2]rotaxanes are intriguing aesthetic molecules. The control of the localization of the macrocycle, which surrounds a molecular axle, along the thread leads to translational isomers of very different properties. Although many moieties have been used as sites of interactions for crown ethers, the very straightforwardly obtained amide motif has more rarely been envisaged as molecular station. In this article, we report the use of secondary and tertiary amide moieties as efficient secondary molecular station in pH-sensitive molecular shuttles. Depending on the N-substitution of the amide station, and on deprotonation or deprotonation-carbamoylation, the actuation of the molecular machinery differs accordingly to very distinct interactions between the axle and the DB24C8.

  14. How Secondary and Tertiary Amide Moieties are Molecular Stations for Dibenzo-24-crown-8 in [2]Rotaxane Molecular Shuttles?

    Science.gov (United States)

    Riss-Yaw, Benjamin; Morin, Justine; Clavel, Caroline; Coutrot, Frédéric

    2017-11-21

    Interlocked molecular machines like [2]rotaxanes are intriguing aesthetic molecules. The control of the localization of the macrocycle, which surrounds a molecular axle, along the thread leads to translational isomers of very different properties. Although many moieties have been used as sites of interactions for crown ethers, the very straightforwardly obtained amide motif has more rarely been envisaged as molecular station. In this article, we report the use of secondary and tertiary amide moieties as efficient secondary molecular station in pH-sensitive molecular shuttles. Depending on the N -substitution of the amide station, and on deprotonation or deprotonation-carbamoylation, the actuation of the molecular machinery differs accordingly to very distinct interactions between the axle and the DB24C8.

  15. Mammalian peptidylglycine alpha-amidating monooxygenase (PAM) mRNA expression can be modulated by the La autoantigen

    DEFF Research Database (Denmark)

    Brenet, Fabienne; Dussault, Nadège; Borch, Jonas

    2005-01-01

    Peptidylglycine alpha-amidating monooxygenase (PAM; EC 1.14.17.3) catalyzes the COOH-terminal alpha-amidation of peptidylglycine substrates, yielding amidated products. We have previously reported a putative regulatory RNA binding protein (PAM mRNA-BP) that binds specifically to the 3' untranslated...... region (UTR) of PAM-mRNA. Here, the PAM mRNA-BP was isolated and revealed to be La protein using affinity purification onto a 3' UTR PAM RNA, followed by tandem mass spectrometry identification. We determined that the core binding sequence is approximately 15-nucleotides (nt) long and is located 471 nt...... downstream of the stop codon. Moreover, we identified the La autoantigen as a protein that specifically binds the 3' UTR of PAM mRNA in vivo and in vitro. Furthermore, La protein overexpression caused a nuclear retention of PAM mRNAs and resulted in the down-regulation of endogenous PAM activity. Most...

  16. Bond durability of contemporary adhesive systems to pulp chamber dentin.

    Science.gov (United States)

    Ayar, Muhammet Kerim

    2015-12-01

    Objective : The purpose of this study was to evaluate long-term bond strengths of dentin adhesive systems, which include one-step self-etch adhesive systems (Optibond All-in-one, Kerr; Adper Prompt L-POP, 3 M ESPE), a three-step etch-and-rinse adhesive (Optibond FL, Kerr) and two-step self-etch adhesive (AdheSE Bond, Ivoclar), applied to pulp chamber dentin surfaces after 12-month water storage by using microtensile bond strength (µTBS) test. Materials and methods : Dentin adhesive systems were applied to unprepared pulp chamber dentin surfaces according to manufacturer's directions, respectively ( n = 5). After applying adhesive systems, composite buildups were done incrementally. Bond strengths to pulp chamber dentin surfaces were determined using µTBS test after water storage for 24 h and 12 month. Kruskal-Wallis analysis and Mann-Whitney U-test for pairwise comparisons were used to determine statistical differences in µTBS between the groups at a significance level of 5%. Results : There were no significant differences in µTBS between storage periods for tested adhesives regardless adhesive class. Conclusion : Bond durability of tested adhesive systems, including one-bottle self-etch adhesives with pulp chamber dentin surfaces, may be considered stable after 12-month water storage. Therefore, one-step self-etch, also called "user-friendly" adhesives may perform and traditional three-step etch-and-rinse adhesives in the long-term when used for bonding to pulp chamber dentin surfaces.

  17. Diffusionless bonding of aluminum to Zircaloy-2

    International Nuclear Information System (INIS)

    Watson, R.D.

    1965-04-01

    Aluminum can be bonded to zirconium without difficulty even when a thin layer of oxide is present on the surface of the zirconium . No detectable diffusion takes place during the bonding process. The bond layer can be stretched as much. as 8% without affecting the bond. The bond can be heated for 1000 hours at 260 o C (500 o F), and can be water quenched from 260 o C (500 o F) without any noticeable change in the bond strength. An extrusion technique has been devised for making transition sections of aluminum bonded to zirconium which can then be used to join these metals by conventional welding. Welding can be done close to the bond zone without seriously affecting the integrity of the bond. This method of bonding aluminum to Zircaloy-2 is covered by Canadian patent 702,438 January 26, 1965. (author)

  18. Polyunsaturated fatty acid amides from the Zanthoxylum genus - from culinary curiosities to probes for chemical biology.

    Science.gov (United States)

    Chruma, Jason J; Cullen, Douglas J; Bowman, Lydia; Toy, Patrick H

    2018-01-25

    Covering up to February 2017The pericarps of several species from the Zanthoxylum genus, a.k.a. the "prickly ash", have long been used for culinary purposes throughout Asia, most notably in the Sichuan (previously Szechuan) cuisine of Southwestern China, due to the unique tingling and numbing orosensations arising from a collection of polyunsaturated fatty acid amide (alkamide) constituents. The past decade has experienced dramatically increased academic and industrial interest in these pungent Zanthoxylum-derived alkamides, with a concomitant explosion in studies aimed at elucidating the specific biochemical mechanisms behind several medically-relevant biological activities exhibited by the natural products. This rapid increase in interest is partially fueled by advances in organic synthesis reported within the past few years that finally have allowed for the production of diastereomerically-pure Zanthoxylum alkamides and related analogs in multigram quantities. Herein is a comprehensive review of the discovery, total synthesis, and biological evaluation of Zanthoxylum-derived polyunsaturated fatty acid amides and synthetic analogues. Critical insights into how chemical synthesis can further benefit future chemical biology efforts in the field are also provided.

  19. Synthesis, Characterization and Antimicrobial Evaluation of some Thiazole-Derived Carbamates, Semicarbazones, Amides and Carboxamide

    International Nuclear Information System (INIS)

    Balawi, N.A.A.; ALShaikh, M.A.A.; Alafeefy, A.M.; Khan, K.M.

    2016-01-01

    This study comprises the synthesis and characterization of twenty thiazole-derived carbamates (3a-e), N-substituted amides (8a-h) and carboxamide (10) from 2-aminothiazoles (1a, b) via nucleophilic substitution reactions with activated carbonyl compounds including, chloroformates (2a-d), acid chlorides (7a-e) and glutaric anhydride (9), respectively. Sequential hydrazinolysis of carbamate (3e) and condensation with a variety of aldehydes and ketones (5a d) afforded the corresponding semicarbazones (6a-d). Some selected synthesized compounds were subjected to in vitro antimicrobial evaluation against common pathogens including, Gram+ve bacteria Bacillus subtilis (NRRL B-543) and Staphylococcus aureus, Gram-ve bacteria Escherichia coli (NRRLB-21), yeasts-Candida albicans (NRRLY-477) and Saccharomyces cercvisiae (NRRL Y-567) and fungs Asperigillus niger (NRRL 599). Screening results revealed that most of the tested compounds possess good antimicrobial activity compared to standard drugs. The highest inhibitory effects against Gram-ve Escherichia coli, Gram+ve Staphylococcus aureus, yeast Candida albicans and fungus Aspergillus niger was displayed by amide (8g) bearing the thiophene moiety. (author)

  20. Synthesis and Evaluation of Coumaroyl Dipeptide Amide as Potential Whitening Agents

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jaeil; Lee, Jaeho [Gwangju Institute of Science and Technology, Gwangju (Korea, Republic of); Lee, Hyesuk; Shin, Kyonghoon; Ryu, Geunseog; Cho, Inshik; Kim, Hanyoung [Central Research Laboratories, Daejeon (Korea, Republic of)

    2013-10-15

    Coumaroyl dipeptide amide, Coumaric acid-LG-NH{sub 2}, was prepared successfully using the solid-phase method, and its efficacy as a skin whitening agent was studied. Coumaric acid-LG-NH{sub 2} was prepared with Rink-amide resin, and 96.354% of purity was obtained. Using MTT assay and LDH release assay, we found that it exhibited very low cytotoxicity. And, we found that Coumaric acid-LG-NH{sub 2} inhibited tyrosinase activity dose-dependently and showed superior tyrosinase inhibitory activity to well-known whitening agent, arbutin. IC{sub 50} value of Coumaric acid-LG-NH{sub 2} was 182.4 μM, and IC{sub 50} value of arbutin was 384.6 μM. Also, in measurement of melanin contents using B16F1 melanoma cell lines, Coumaric acid-LG-NH{sub 2} reduced melanin production induced by α-MSH statistically significant, and showed superior melanin inhibitory activity to p-coumaric acid or arbutin. In addition, Coumaric acid-LG-NH{sub 2} reduced MC1R mRNA expression level. Thus, we concluded that MC1R pathway is the significant pathway of Coumaric acid-LG-NH{sub 2}, and Coumaric acid-LG-NH{sub 2} has great potential to be used as novel whitening agents.