WorldWideScience

Sample records for sponsoring innovative projects

  1. Wisdom for Building the Project Manager/Project Sponsor Relationship: Partnership for Project Success

    National Research Council Canada - National Science Library

    Patton, Nanette; Shechet, Allan

    2007-01-01

    The project sponsor can promote information technology (IT) project success in several ways, yet many projects either have no formally designated project sponsor or the project sponsor is confused about his/her...

  2. Wisdom for Building the Project Manager/Project Sponsor Relationship: Partnership for Project Success

    National Research Council Canada - National Science Library

    Patton, Nanette; Shechet, Allan

    2007-01-01

    .... This article discusses conventional roles and responsibilities of the project sponsor and then discusses strategies a project manager can employ to define boundaries to reduce role confusion and promote partnership to facilitate project success.

  3. DOE-EPSCOR SPONSORED PROJECT FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Jianting

    2010-03-11

    Concern over the quality of environmental management and restoration has motivated the model development for predicting water and solute transport in the vadose zone. Soil hydraulic properties are required inputs to subsurface models of water flow and contaminant transport in the vadose zone. Computer models are now routinely used in research and management to predict the movement of water and solutes into and through the vadose zone of soils. Such models can be used successfully only if reliable estimates of the soil hydraulic parameters are available. The hydraulic parameters considered in this project consist of the saturated hydraulic conductivity and four parameters of the water retention curves. To quantify hydraulic parameters for heterogeneous soils is both difficult and time consuming. The overall objective of this project was to better quantify soil hydraulic parameters which are critical in predicting water flows and contaminant transport in the vadose zone through a comprehensive and quantitative study to predict heterogeneous soil hydraulic properties and the associated uncertainties. Systematic and quantitative consideration of the parametric heterogeneity and uncertainty can properly address and further reduce predictive uncertainty for contamination characterization and environmental restoration at DOE-managed sites. We conducted a comprehensive study to assess soil hydraulic parameter heterogeneity and uncertainty. We have addressed a number of important issues related to the soil hydraulic property characterizations. The main focus centered on new methods to characterize anisotropy of unsaturated hydraulic property typical of layered soil formations, uncertainty updating method, and artificial neural network base pedo-transfer functions to predict hydraulic parameters from easily available data. The work also involved upscaling of hydraulic properties applicable to large scale flow and contaminant transport modeling in the vadose zone and

  4. [Analysis of projects of schistosomiasis sponsored by National Science Foundation of China].

    Science.gov (United States)

    Wen-di, Zhou; Liang, Shi; Xue-Dan, Ke; Jie, Wang

    2017-07-27

    To summarize the present development by analysis of projects in schistosomiasis funded by National Science Foundation of China (NSFC). Based on the ISIS database of NFSC, the projects in the studies of schistosomiasis from 2005 to 2016 were analyzed. The distributions of sponsored numbers, amounts, types, agencies, disciplines and changes in research topics by means of network profiles were described. During the study period, 198 projects were funded by NSFC totally with 76.05 million yuan in which the general and youth projects were main types. The main sponsored agencies were research institutes and medical colleges. The top three fields sponsored were medical pathogenic microbes and infection, veterinary and medical immunology. The funding on schistosomiasis researches has a downward trend, but studies are continuing in depth. In this situation, innovative and interdisciplinary researches need to be encouraged to promote the development of schistosomiasis.

  5. EC-sponsored research activities on innovative passive safety systems

    International Nuclear Information System (INIS)

    Bermejo, J.M.; Goethem, G. van

    2000-01-01

    On April 26th 1994, the European Union (EU) adopted via a Council Decision a EURATOM Multiannual Programme for community activities in the field of Nuclear Fission Safety (NFS) Research for the period 1994 to 1998. An area of work having, as an objective, to 'explore innovative approaches' to improve the safety of future and existing reactors, was introduced in this programme. Most of the projects selected in this area, which have been grouped under a common cluster known as 'INNO', are currently being carried out on a 'cost-shared' basis, i.e. contribution of the European Commission is up to 50% of the total cost. At present, the 'INNO' cluster is composed of 10 projects in which 25 different organisations, representing research centres, universities, regulators, utilities and vendors from 7 EU member states and Switzerland, are involved. These projects are proving to be an efficient means to gain the necessary phenomenological knowledge and to solve the challenging problems, many times of generic nature, posed among others by the characteristically small driving forces of the systems studied and by the lack of really prototypical test facilities. (author)

  6. Commercializing Government-sponsored Innovations: Twelve Successful Buildings Case Studies

    Science.gov (United States)

    Brown, M. A.; Berry, L. G.; Goel, R. K.

    1989-01-01

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies.

  7. Commercializing government-sponsored innovations: Twelve successful buildings case studies

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.; Berry, L.G.; Goel, R.K.

    1989-01-01

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies. 27 refs., 21 figs., 4 tabs.

  8. Pathfinder Innovation Projects

    Science.gov (United States)

    The Pathfinder program supports high-risk, high-reward research ideas with funding and staff time. The goal is to feed a culture of innovation in the Agency and integrate innovative ideas in EPA research programs.

  9. A Case Study of Teaching Marketing Research Using Client-Sponsored Projects: Method, Challenges, and Benefits

    Science.gov (United States)

    Bove, Liliana L.; Davies, W. Martin

    2009-01-01

    This case study outlines the use of client-sponsored research projects in a quantitative postgraduate marketing research subject conducted in a 12-week semester in a research-intensive Australian university. The case study attempts to address the dearth of recent literature on client-sponsored research projects in the discipline of marketing.…

  10. Separations innovative concepts: Project summary

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. (ed.)

    1988-05-01

    This project summary includes the results of 10 innovations that were funded under the US Department's Innovative Concept Programs. The concepts address innovations that can substantially reduce the energy used in industrial separations. Each paper describes the proposed concept, and discusses the concept's potential energy savings, market applications, technical feasibility, prior work and state of the art, and future development needs.

  11. Innovations in project activities

    Directory of Open Access Journals (Sweden)

    Serbskaya O.V.

    2016-11-01

    Full Text Available this article considers the ways of project management, models of project management: classical model and the model of flexible designing Agile, pays more attention to the process of project management using Agile model and to the problems of using the project management models in modern conditions.

  12. Project-based fieldwork: perspectives of graduate entry students and project sponsors.

    Science.gov (United States)

    Fortune, Tracy; McKinstry, Carol

    2012-08-01

    This article builds on an earlier viewpoint regarding the need for project-focussed fieldwork. It presents the findings of an evaluative study into the value of project placements undertaken by final year graduate entry master's students as part of a capstone subject. The authors argue that provision of project placements enable impending graduates to develop and implement macro level strategies to develop prevention, resource and service development skills often required of contemporary occupational therapy practitioners. A qualitative approach is adopted. Student cohorts from 2005 and 2006 completed open-ended, written questionnaires, and agency project sponsors were interviewed to obtain their perspectives of the project placement experience. Despite some concern that project placements might be undertaken at the expense of 'clinical' placements these findings reveal that projects managed by students were perceived by services to add great value enabling them to advance important priorities. Students and sponsors highlighted a range of positive learning outcomes, including the ability to work collaboratively with supervisors and develop advanced communication skills and political acumen. The success of such placements depends on supportive supervision from academic staff. CONCLUSIONS AND SIGNIFICANCE OF THE STUDY: The findings promote project placements as a highly authentic aspect of work integrated learning enabling learners to draw together a range of attributes that support the ability to manage complex issues that have occupational relevance at a macro level. In addition, such experiences help learners to develop agency and political acumen both increasingly important capabilities for the contemporary workplace. © 2012 The Authors Australian Occupational Therapy Journal © 2012 Occupational Therapy Australia.

  13. Industrial Sponsor Perspective on Leveraging Capstone Design Projects to Enhance Their Business

    Science.gov (United States)

    Weissbach, Robert S.; Snyder, Joseph W.; Evans, Edward R., Jr.; Carucci, James R., Jr.

    2017-01-01

    Capstone design projects have become commonplace among engineering and engineering technology programs. These projects are valuable tools when assessing students, as they require students to work in teams, communicate effectively, and demonstrate technical competency. The use of industrial sponsors enhances these projects by giving these projects…

  14. Computer Education: A Catalog of Projects Sponsored by the U.S. Department of Education, 1983.

    Science.gov (United States)

    Klein, Susan S., Ed.

    This first catalog of computer education projects sponsored by the U.S. Department of Education presents summaries of 275 computer education projects, each of which includes an abstract and information on target audience, award amount, major products, project director, and Department of Education contact person. An introductory overview summarizes…

  15. [Analysis of projects of infectious disease epidemiology sponsored by National Natural Science Foundation of China].

    Science.gov (United States)

    Jian-Ming, Wang; Yan-Kai, Xia; Hui-Juan, Zhu; Feng, Chen; Hong-Bing, Shen

    2016-05-10

    To analyze the projects on the infectious disease epidemiology sponsored by the National Natural Science Foundation of China (NSFC), explore the hotspot and development trend, and offer a reference for researchers in this field. Based on the NSFC database, the projects on the infectious disease epidemiology (H2609) sponsored from 1987 to 2014 were analyzed. The changes of fund numbers, amounts and research fields were described. During the study period, NSFC sponsored 373 projects, including 228 general projects (61.1%), 78 youth projects (20.9%) and 67 other projects (18.0%). The average amount of the grant was 358.2 thousand Yuan (20 thousand-8 million). The main sponsored research fields were mechanisms of pathogen and immunity (36.2%) and population-based epidemiological studies (33.0%). The top three diseases were hepatitis, HIV/AIDS and tuberculosis. The amount of funding on researches of infectious disease epidemiology has increased continuously, which has played an important role in training scientific talents in the field of prevention and control of infectious diseases.

  16. MANAGING INNOVATION PROJECTS USING DISTRIBUTION LOGISTICS

    Directory of Open Access Journals (Sweden)

    Erika Loučanová

    2015-12-01

    Full Text Available A significant part of innovation projects management is the distribution logistics. From the point of view of time and material content, the properly chosen way of distribution is one of many factors for success of the project and innovation creation itself. The paper points out the fundamental basis of innovation management in the stage of its realization referring to the importance of distribution logistics in this part of innovation project management. Distribution logistics in the project management provides comprehensive solutions to efficiency of tangible relocating processes in all connections and mutual relations of project in order to maintain compliance between economy and business when implementing innovations.

  17. Chosen aspects of innovative projects management

    Directory of Open Access Journals (Sweden)

    J. Gawlik

    2010-07-01

    Full Text Available Any company willing to maintain its market position has to search and implement innovative products and services. Integrated development ofenterprise’s innovative activity requests a constant search for new technologies and new organizational forms. Ability of effectivemanagement of innovative projects becomes a crucial issue. The paper presents a characteristic of innovative projects accordingly toOECD standards. Project management concepts based on Project Management Institute (PMI and International Project ManagementAssociation (IPMA procedures have been discussed. Key success factors have been defined, i.e.: obtaining assumed project outcome (range, project implementation conform to planned schedule (deadline, maintaining project costs under a certain limit (budget, quality (are the customers satisfied?, resources (team losses and interpersonal relations. Tables comparing product innovativeness with fields of requested know – how for particular product innovativeness levels have been elaborated. Finally, SCRUM method of adaptive project management aiming at providing possibly optimal outcome has been described.

  18. Marketing Capstone Models "The Apprentice" Television Show with Client-Sponsored Projects

    Science.gov (United States)

    Strauss, Judy

    2011-01-01

    Marketing faculty use cases, simulations, and client-sponsored projects to achieve learning objectives in the marketing capstone class. This class typically aims to integrate and apply previously learned material and to transition students into their careers. Drawing on the professional school, creative problem solving and constructivist learning…

  19. A Qualitative Study of the Relationship between a Banking IT Troubled Project and the Executive Project Sponsor's Project Management Maturity Level

    Science.gov (United States)

    Northcraft, Terry G.

    2017-01-01

    This qualitative study examined the effect the level of project management maturity a banking IT project sponsor has on project success. Project management maturity is gauged by the amount of modern project management training, knowledge and organizational skills an individual or organization has and applies to their project lifecycle experiences.…

  20. Cooperative Innovation Projects : Capabilities and Governance Mechanisms

    NARCIS (Netherlands)

    Bosch-Sijtsema, P.M.; Postma, T.J.B.M.

    This paper is concerned with how firms in a project-based industry cooperate in technological innovation projects in the construction industry. The main focus of the paper is on the sharing of capabilities in cooperative innovation projects and how these cooperations are governed. A knowledge-based

  1. Pathfinder Innovation Projects: Awardees 2015

    Science.gov (United States)

    The Pathfinder program supports high-risk, high-reward research ideas with funding and staff time. The goal is to feed a culture of innovation in the Agency and integrate innovative ideas in EPA research programs.

  2. Pathfinder Innovation Projects: Awardees 2016

    Science.gov (United States)

    The Pathfinder program supports high-risk, high-reward research ideas with funding and staff time. The goal is to feed a culture of innovation in the Agency and integrate innovative ideas in EPA research programs.

  3. Forward-Looking Search Within Innovation Projects

    DEFF Research Database (Denmark)

    Jissink, Tymen; Rohrbeck, René; Schweitzer, Fiona

    To develop highly-innovative projects, which are fraught with uncertainty and longer development times, one cannot solely rely on initial planning and budgeting to ensure the project’s outcome remains novel. This study posits that to develop innovative projects, project teams need to engage...... in forward-looking search during development to ensure the project’s outcome remains novel and relevant. We refer to forward-looking search as the search and evaluation of information on markets, customers, and technologies in terms of their future impact. Data on 159 unique innovation projects from...... the Danish manufacturing industry shows that forward-looking search significantly impacts innovativeness. The effect follows an inverted-U shape where the greatest positive effect on innovativeness occurs in moderately planned projects and significantly lower effects in low- and highly planned projects...

  4. Delivering construction projects using innovative building technologies

    CSIR Research Space (South Africa)

    Ampofo-Anti, Naalamkai

    2017-07-01

    Full Text Available This paper presents a project delivery model developed for use by public sector clients tasked with using innovative building technologies (IBTs) in lieu of conventional building technologies (CBTs) in the delivery of social infrastructure projects....

  5. Innovation Management in Project-Based Firms

    NARCIS (Netherlands)

    F.P. Blindenbach

    2006-01-01

    textabstractProject-based firms have an organizational structure, capabilities and routines that clearly distinguish them from manufacturing firms. Some have claimed that these characteristics make project-based firms more innovative than, for instance, manufacturing firms, others argue the

  6. Management of Innovative Projects through Agile Technology

    Directory of Open Access Journals (Sweden)

    Radu Bucea-Manea-Tonis

    2014-09-01

    Full Text Available Because of the globalization and the evolution of internet and technologies, nowadays the innovation is associated with open collaboration conducted by a legal framework. The paper analyses the methods that allow a better management for innovative projects and focuses on agile projects within a technological network.

  7. Army Corps of Engineers: Better Guidance Could Improve Corps’ Information on Water Resources Projects Undertaken by Nonfederal Sponsors

    Science.gov (United States)

    2016-12-01

    Engineers continued to build the project. In addition to cost savings , another nonfederal sponsor said that it chose to lead a harbor deepening... save lives and reduce property damage. For navigation projects, expedited project completion may result in economic benefits, such as increased...commerce and tourism from deeper-draft ships having the ability to enter ports that have been deepened, according to one nonfederal sponsor.26 In 2013

  8. Methodological Aspects of Project Techniques Selection for Innovation Project Management

    Directory of Open Access Journals (Sweden)

    Anna Yakovleva

    2014-06-01

    Full Text Available Project Management offers a variety of methodologies which provides managers with different techniques and tools to use during project planning and implementation. At the same time there is a substantial lack of systematized approaches to the management of innovation projects. In this article key factors in the selection of appropriate techniques in innovation project management will first be identified. Theoretical analysis of different project management standards and possibility of their use will then be discussed. In addition how the techniques can be applied will be investigated through academic paper analysis. . This research makes a theoretical contribution to the field of project management by selecting and determining which project management techniques can be adapted and applied to innovation projects. Recommendations for practical application are based on theoretical findings of the research. These include two main factors, which are: influencing the choice of project management techniques and the structure of project selection process. The significance of the results obtained is confirmed by creation of theoretical knowledge, which permits to thoroughly understand and capture issues which may emerge during innovation project planning and implementation, through the use of established project management methodology. Keywords: Project management, Innovation, Project management standard, innovation project, PMBoK, PRINCE2, ICB.

  9. OZ: An Innovative Primary Flight Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed SBIR project will develop OZ, an innovative primary flight display for aircraft. The OZ display, designed from "first principles" of vision science,...

  10. Overview of the projects sponsored within th EU-R and D framework programme

    International Nuclear Information System (INIS)

    Zurita, A.; Goethem, G. van; Bermejo, J.M.

    1999-01-01

    Assuming that preventive measures to avoid reactor pressure vessel (RPV) failure under core degradation scenarios have failed, the stabilisation of the core melts after its release from the RPV is a key issue. Adequate cooling of the ex-vessel corium and the control of its interactions with the coolant and structures are the main challenges to mitigate and stabilise the situation preserving the containment integrity. In this regard, the on-going Fourth Euratom Framework Programme (4 th EFP) contributes with experimental and theoretical research activities aimed at responding to the main challenges mentioned, by satisfying three objectives: - To improve the understanding of the basic physics related to ex-vessel corium behaviour from the phenomenological and technological viewpoints, as well as to provide a methodology for investigating it and setting up joint multi-partner projects to be co-sponsored and co-ordinated by the EC; - to quantify and reduce the uncertainties associated with the risk issues by conducting experimental and numerical investigations and eventually to achieve a European consensus on the phenomenology and on accident mitigation strategies; - to provide a technological response to the risk issues by developing engineered safety systems (e.g. core-catchers) and severe accident management strategies (e.g. guidelines), and to discuss such a technological response with the end users of these technologies, i.e. designers and licensers. To fulfil these objectives, the 4 th EFP co-sponsors a total of five projects within the cluster 'Ex-Vessel Corium Behaviour and Coolability' of the Nuclear Fission Safety Programme. The research undertaken addresses the main different aspects such as the determination of the composition and thermodynamic data of the melt; experiments on spreading behaviour on various types of surfaces, as well as on corium coolability by flooding or water injection; investigation of corium stratification, crust and heat transfer

  11. Innovative finance : strategic research project.

    Science.gov (United States)

    2013-08-01

    Its time to rethink how we fund transportation infrastructure because most transportation : experts agree: theres a transportation funding and financing crisis looming. : Projected revenues from current sources of transportation funding will am...

  12. Managing teams performing complex innovation projects

    NARCIS (Netherlands)

    Oeij, P.R.A.; Vroome, E.M.M. de; Dhondt, S.; Gaspersz, J.B.R.

    2012-01-01

    Complexity of projects is hotly debated and a factor which affects innovativeness of team performance. Much attention in the past is paid to technical complexity and many issues are related to natural and physical sciences. A growing awareness of the importance of socio-organisational issues is

  13. Colour Day: an innovative project

    CERN Multimedia

    Staff Association

    2016-01-01

    This year, the Children’s Day-Care Centre (EVE) and School works on the theme of colours. Every class has their own project revolving around this common theme. The class of Claire, Sandrine and Nadia, introduced a monthly “Colour Day”. The objective of this day is to offer children different activities (arts and crafts, baking, etc.) designed around a specific colour. The children get a chance to decorate their classroom and learn in many different ways inspired by the colours blue, red, and many others. The parents are also called to contribute and invited to dress their children in the colour of the day. In September, we discovered the colour blue, in October it was time for red, and in mid-November yellow will brighten up our structure. Everyone plays along, making this a very festive day for us all. On Tuesday, 20 September, we saw the whole School turn blue! We were all dressed in blue and we made blue paintings, too! We made beautiful artwork inspired by artists like Ma...

  14. Science Innovation Through Industry Partnership: Lessons from AMPERE in Bridging the Federal Sponsor/Private Corporation Divide

    Science.gov (United States)

    Anderson, B. J.; Korth, H.; Erlandson, R. E.

    2017-12-01

    The Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE) was made possible by harnessing an fortuitous capability of the Iridium Communications constellation of 70 polar orbiting satellites. In 1996 it was realized that the attitude magnetometers on-board the Iridium satellites, then in fabrication, could potentially be used to obtain the first ever global and continuous measurements of the Birkeland currents with a sufficiently short re-sampling cadence (10 minutes) to track the dynamic evolution of the large-scale currents. The experience of taking this idea from 1996 through various research grant supported efforts, mission of opportunity proposal attempts, and finally through funding and implementation as a National Science Foundation geospace facility, revealed a number of challenges both in proposing innovative solutions to existing sponsor programs and also in working between the federal sponsor community and the private commercial space environment. Implementing AMPERE required a code change to on-board software on the Iridium satellites and it proved necessary to engage NASA to adjust the solicitation language to allow AMPERE. For NASA proposals we also encountered a conflict with respect to federal sponsorship such that the original business configuration of Iridium could not accept the accounting regime implied by a sub-contract derived from a federal contract acquisition. Subsequent mission of opportunity efforts encountered various other challenges including the cancellation of an explorer to fund the exploration initiative in 2001. The facilities proposal to NSF was almost not submitted owing a funding vehicle disparity between the preferred proposer structure (contract) vs NSF's requirement to fund only grants and a final hurdle concerned the structure of the contract with Iridium which was initially a sub-contract but was changed to a fixed-price data purchase due to NSF's limitations on funding fee-bearing engineering

  15. An Analysis of Collaborative Problem-Solving Mechanisms in Sponsored Projects: Applying the 5-Day Sprint Model

    Science.gov (United States)

    Raubenolt, Amy

    2016-01-01

    In May 2016, the office of Finance and Sponsored Projects at The Research Institute at Nationwide Children's Hospital conducted a 5-day design sprint session to re-evaluate and redesign a flawed final reporting process within the department. The department sprint was modeled after the design sprint sessions that occur routinely in software…

  16. PROJECT - RESOURCE MANAGEMENT OF INNOVATIONS IN EDUCATION: ANTHROPOLOGICAL PROJECTION

    Directory of Open Access Journals (Sweden)

    Galina Aleksandrovna Ignat’eva

    2015-08-01

    Full Text Available The purpose of the research was to denote a way to solve the problem of education mana-gement ΄s insufficient efficiency considered from the point of view of education opportunities to influence on the formation of mechanisms for sustainable development of society as a whole and its educational component. The concept «project-resource management of innovation in education» regarded on the basis of the anthropological project-transforming paradigm. Conceptually-categorical context presented by conceptual cluster composed of coordinated concepts «project», «resource», «educational reality», «organizational-resource potential», «project commonality». In the theoretical part of the study on the basis of analysis of the normative and exploratory approaches to educational innovations organization and management it was established the search approach ΄s leading role in the methodological substantiation of project-resource management. The study have indicated that in the presence of variable models of innovation management in education, corresponding to various predictive models of continuing education post-industrial society, project-resource management is an universal mechanism for the transition from separate innovation΄s precedents to the an authentic reality of innovative education. In the technological part of the study the main concern was to submit the project-resource management by the management goal’s system, each of which includes the specific management actions, projected results and the organizational forms. The project-resource management ΄s professional – activity context of the study showed evolution of managerial positions: an effective performer – an effective leader – strategist, implemented during the transition from directly directive management to the project management and further to the project-resource management. Based on the findings identified the key factors of initiatively-problem projects

  17. DEFORMATION FIELD OF COMPETENCE IN INNOVATIVE PROJECTS

    Directory of Open Access Journals (Sweden)

    Сергей Дмитриевич БУШУЕВ

    2017-03-01

    Full Text Available The use of a competence-based approach in the programs of innovative development organizations is considered. An analysis of the latest achievements in the world and Ukraine in the field of application of the competency approach in the programs of organizational development is done. The principles of Bloom's taxonomy to generate fields of competence and expertise are given. The principle of the curvature of field of competencies in innovative projects and programs is formulated. Application of the model taking into account the deformation of the competencies of the field allows to increase the accuracy of the model and to determine the trajectory of development of competence of project managers, teams, and organizations. An example of an organization competency assessment based on IPMA Delta model is given. The successful implementation of innovative projects and programs provided by the creative use of competency approach. This approach can be used as a common language of communication, which brings together the organization and employees, tasks and performers. Thus the development of the organization and development of personnel takes place at the same time.

  18. Effectiveness of innovation leadership styles: a manager's influence on ecological innovation in construction projects

    OpenAIRE

    Bossink, B.A.G.

    2004-01-01

    This article presents four basic innovation leadership styles: charismatic, instrumental, strategic and interactive innovation leadership. The leadership styles and their characteristics relate to process and product innovations in construction projects. A theoretical framework - which synthesizes these relations enables explorative research into the effects of leadership on organizational innovativeness. Four case studies, observing the same manager in four comparable projects, explore the e...

  19. 7 CFR 654.11 - Sponsor(s)' responsibility.

    Science.gov (United States)

    2010-01-01

    ...&M on land administered by that agency. If project measures benefit both Federal and non-Federal land... § 654.11 Sponsor(s)' responsibility. (a) On non-Federal land, sponsor(s) are responsible for financing and performing without cost to the Federal Government, needed operation and maintenance (O&M) of...

  20. Prospects for the development of open innovation in project management

    Directory of Open Access Journals (Sweden)

    Sachuk S.N.

    2017-01-01

    Full Text Available from a management perspective, the organizational change process from closed to open innovations is one of actual problems in an inter-organizational cooperation, because companies need to introduce new organizational methods. In this context, the author proposes to consider project management under the model of open innovations. The article describes the author's approach in the study of project management in open innovation projects and their impact on traditional methods of project management.

  1. The economic rationale for investing decisions innovative projects rationalization of investments for innovative projects

    Directory of Open Access Journals (Sweden)

    L. O. Zhitinskaya

    2017-01-01

    Full Text Available The article provides a selection of methods for determining the feasibility of an investment-innovative project. Estimated indicators are identified analytically, on their basis a conclusion is made about the economic efficiency and feasibility of the project, which is the basis of its competitiveness. Such growth analytics is necessary, since the social and economic development of the country and the region largely depends on the investment climate, which is facilitated by the legislation of the Russian Federation (the Tax Code of the Russian Federation, the law of the Russian Federation on the regulation of investment activities, etc.. Since competitiveness is also determined by the economic feasibility and financial solvency of innovative projects, modern information and software, as well as the methodology for project appraisal and the corresponding order of their implementation, are needed. In the Russian Federation, a method is used to assess the efficiency of capital investments in capitalist countries, as well as the methodology of economic (competitive analysis of investment-innovative projects. The basis of the method is that reimbursement of investments occurs in two economic forms: net profit and depreciation (net income. Of the numerous methods for assessing the feasibility of investment, the most often used along with discount methods (taking into account the factor of money changes over time, statistical methods with determining the payback period and the average rate of return on investment. Defined indicators: the net present value (NPV and the internal rate of return (IRR. The methodology specified in the article is useful to the investor in order to rationalize investment flows, helps to achieve the maximum IRR. The implementation of the innovative project serves the competitiveness of the manufacturing enterprise by increasing the technical and technological levels of the products.

  2. Project-based knowledge in organizing open innovation

    CERN Document Server

    Comacchio, Anna; Pizzi, Claudio

    2014-01-01

    Enriching understanding of the current theoretical debate on project-based open innovation, ‘Project-based Knowledge in Organizing Open Innovation’ draws on innovation management literature and knowledge-based perspectives to investigate the relationship between knowledge development at project level and the strategic organization of open innovation. Addressing the still open issue of how the firm level should be complemented by studies at the project level of analysis, this book provides theoretical and empirical arguments on the advantages of a more fine-grained level of analysis to understand how firms organize their innovation processes across boundaries. The book also addresses the emerging interest in the management literature on project-based organizations, and on the relevance of project forms of organizing in a knowledge-based economy. Through field research in different industrial settings , this book provides empirical evidence on how firms design open innovation project-by-project and it will ...

  3. Venture Leaders Prize for innovative technology projects

    CERN Document Server

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  4. The evolution of project management approach to innovation: the initiative, project, program, portfolio

    Directory of Open Access Journals (Sweden)

    Baklanova Julia

    2012-03-01

    Full Text Available The author shows the close relationship between the innovative development of the economic entity, projects, programs, portfolios, strategic management. Stresses that the innovative development of the most effective it is at the expense of project management that the maximum positive effect generated by the implementation of innovation with methods, techniques, tools of project management.

  5. Opportunities of real innovation projects for the acquisition of professional competences in Engineering

    Science.gov (United States)

    de la Haba, M. J.; Taguas, E. V.; del Campillo, M. C.; Guerrero, J. E.; Pérez-Marín, M. D.

    2012-04-01

    The internationalization of the curricula and the development of skills for the labor market are core objectives of the Bologna Process. In this work, the structure and the organization of a Master Course "Innovation and New Technologies in Agrifood Engineering", in the University of Cordoba is presented. The theorist contents are focused on: 1) the opportunities (public and private) for the creation of Technology-Based Innovative Enterprises (TBIE) by emphasizing cooperation between stakeholders to enhance the skills of students; 2) the role of the University for supporting them and for collaborating in the "Open Innovation" among companies in different European countries. In the practical topics, the students must use that information for preparing a real innovation project of agrifood products which is tutored by the teachers and is presented and evaluated by a member of CTA (Corporación Tecnológica de Andalucía), an institution of sponsoring of innovation and technological projects. The evaluation of the students about its utility and the organization aspects corresponding to the course 2010-2011 was 4.2 in scale from 0 to 5. In this context, teachers have noted that innovation processes have improved the employability of students as they have been prepared to face the market challenges and opportunities.

  6. Reports on research projects in the field of reactor safety sponsored by the Federal Minister for Research and Technology

    International Nuclear Information System (INIS)

    1978-09-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS - Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), der Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS - F Fortschrittsberichte (GRS - F - Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work. The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC Communities and the OECD. (orig./HP) 891 HP [de

  7. Applying Agile Project Management to Predevelopment Stages of Innovation

    OpenAIRE

    Winston Gonzalez

    2014-01-01

    This study explores the early stages of innovation: the predevelopment stages leading to development. The paper examines the agile project management approach as a flexible and dynamic approach to manage the predevelopment stages of innovation. Scholarly sources reveal insufficient findings, signaling a gap in the literature in the areas of fuzzy front end of innovations and the applicability of modern approaches such as the agile project management approach. As a result, this paper introduce...

  8. Innovations in Advanced Materials and Metals Manufacturing Project (IAM2)

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Elizabeth [Columbia River Economic Development Council, Vancouver, WA (United States)

    2017-01-06

    This project, under the Jobs and Innovation Accelerator Challenge, Innovations in Advanced Materials and Metals Manufacturing Project, contracted with Cascade Energy to provide a shared energy project manager engineer to work with five different companies throughout the Portland metro grant region to implement ten energy efficiency projects and develop a case study to analyze the project model. As a part of the project, the energy project manager also looked into specific new technologies and methodologies that could change the way energy is consumed by manufacturers—from game-changing equipment and technology to monitor energy use to methodologies that change the way companies interact and use their machines to reduce energy consumption.

  9. AN INVESTIGATION OF CONTEXTUAL INFLUENCES ON INNOVATION IN COMPLEX PROJECTS

    DEFF Research Database (Denmark)

    Kavin, Lone; Narasimhan, Ram

    2018-01-01

    There is paucity of literature on supplier-enabled-innovation in complex project-contexts. Based on literature from repetitive-manufacturing-contexts, this conceptual chapter identifies innovation-fostering-practices and develops a conceptual-framework relating them to innovation-performance. The......There is paucity of literature on supplier-enabled-innovation in complex project-contexts. Based on literature from repetitive-manufacturing-contexts, this conceptual chapter identifies innovation-fostering-practices and develops a conceptual-framework relating them to innovation...... commercialized. Suppliers can play an important role in ensuring successful exploitation of new knowledge. We posit that innovation-fostering-practices mediate the exploitation of new knowledge into superior innovation-performance. Thus, the proposed conceptual-framework incorporates the exploration...... and exploitation-aspects of innovation. Since contextual-differences can play a major role in the efficacy of these innovation-practices, our conceptual-framework might not fit complex project-environments in its entirety. To better understand the contextual-influences in complex projects, we evaluate...

  10. TARGETED APPROACH TO MANAGING THE FINANCING OF INNOVATIVE PROJECTS

    Directory of Open Access Journals (Sweden)

    G. G. Balayan

    2014-01-01

    Full Text Available The variant of financing the innovative project that allows you to structure any project on the standard stages, regardless of the content of the project. For decision makers, in the management system information is narrowed to a necessary and sufficient by the correct selection of data. The necessity of timely forecast of problem situations and liquidation of not bringing to the state of the problem. It is proposed to organize the state structure, the Bank of innovations, concentrating innovations and connecting inventors with investors and customers.

  11. Nuclear Waste Separation and Transmutation Research with Special Focus on Russian Transmutation Projects Sponsored by ISTC

    International Nuclear Information System (INIS)

    Conde, Henri; Blomgren, Jan; Olsson, Nils

    2003-03-01

    for transmutation of long lived nuclear waste should be carried through on about the same level as present (5 MSEK/year). Support is also given for participation in international projects, primarily EU projects. The aim of the research is to provide knowledgeable experts in the field to assess the international research and development on transmutation. Swedish transmutation research, in general fundamental research, are performed at three universities CTH, KTH and Uppsala University with the essential support from SKB, SKI and Swedish Nuclear Technology Centre. The same university groups are also participating in a number of international transmutation related research projects, in particular, the projects under the 5th Framework Programme of the European Commission. One of the main issues of the International Science and Technology Center (ISTC) in Moscow, which is financially supported by USA, EU, Russia, Japan, South Korea and Norway, is to reduce the proliferation risk by engaging experts at the former Soviet Union nuclear weapon laboratories in civilian research. This issue has been more pronounced since the terrorist attacks on September 11, 2001 and the following threats from the same group of terrorists. At a workshop in Saltsjoebaden in 1991 on Accelerator Based Radioactive Waste Transmutation it was concluded that research on incineration and transmutation of reactor- and weapons grade plutonium was a civilian research area well suited to occupy the former USSR weapon experts with support from ISTC. The Expert Group on Transmutation/SKI Reference Group has chosen to initiate ISTC projects, which are dealing with fundamental technical issues for the accelerator driven transmutation concepts. The possibility of finding a Swedish research group as a counterpart to the Russian group has also played a role in the reference group's selection of projects. The Swedish research groups from CTH, KTH and UU are at present collaborating in 9 transmutation projects

  12. Reports on the projects in the field of reactor safety sponsored by the Federal Ministry for Research and Technology

    International Nuclear Information System (INIS)

    1977-11-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS-projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear energy plants and their systems and the further development of safety technology. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of BMFT, informs continuously of the status of these investigations within the series 'GRS-F-Fortschrittsberichte' (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the different projects of the search program. The individual reports are prepared by the contractors themselves as a documentation of their progress in work and published by the GRS-FB (Research Coordination Department), Forschungsbetreuung at the GRS, within the framework of general information of the progress in reactor safety research. Each report describes the work performed, the results and the next steps of the work. The individual reports are attached to the classification system established by the CEC (Commission of the European Communities). The GRS-F-Progress Reports also include a list of the current investigations arranged according to the projects of the BMFT-Research Program Reactor Safety. This compilation, in addition to the LWR-investigations, also contains first contributions on the safety of advanced reactors. (orig.) [de

  13. Reports on the projects in the field of reactor safety sponsored by the Federal Ministry for Research and Technology

    International Nuclear Information System (INIS)

    1977-06-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS-projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear energy plants and their systems and the further development of safety technology. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of these investigations within the series 'GRS-F-Forschrittsberichte' (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the different projects of the search program. The individual reports are prepared by the contractors themselves as a documentation of their progress in work and published by the GRS-FB (Research Coordination Department), Forschungsbetreuung at the GRS, within the framework of general information of the progress in reactor safety research. Each report describes the work performed, the results and the next steps of the work. The individual reports are attached to the classification system established by the CEC (Commission of the European Communities). The GRS-F-Progress Reports also include a list of the current investigations arranged according to the projects of the BMFT-Research Program Reactor Safety. This compilation, in addition to the LWR-investigations, also contains first contributions on the safety of advanced reactors. (orig.) [de

  14. SPECIFICITY OF INNOVATIVE PROJECT MANAGEMENT OF SMALL AND MEDIUM BUSINESSES

    Directory of Open Access Journals (Sweden)

    Tatiana E. Platonova

    2013-01-01

    Full Text Available Issues of investing small businesses, results and problems of small enterprises in Russia in recent years are considered in the article. The main components of the establishment and operation of venture capital firms and their importance in achieving effective results in the implementation of innovative projects are analyzed. Areas of success of small businesses in innovation sphere are identified.

  15. Family literacy projects and the public library | Machet | Innovation

    African Journals Online (AJOL)

    Family literacy projects and the public library. Myrna Machet, Nicoline Wessels. Abstract. No Abstract. Innovation Vol. 32, 2006: 55-73. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/innovation.v32i1.26513 · AJOL African Journals Online.

  16. Project management and management of innovation in small industrial firms

    NARCIS (Netherlands)

    During, W.E.

    1986-01-01

    In innovation projects, three sub-processes have to evolue concurrently. These are problem solving, to bring about a new product or process; internal innovation diffusion, to disseminate information and engender a positive attitude towards new developments; and change in the organization so that it

  17. How Configuration Management Helps Projects Innovate and Communicate

    Science.gov (United States)

    Cioletti, Louis A.; Guidry, Carla F.

    2009-01-01

    This slide presentation reviews the concept of Configuration Management (CM) and compares it to the standard view of Project management (PM). It presents two PM models: (1) Kepner-Tregoe,, and the Deming models, describes why projects fail, and presents methods of how CM helps projects innovate and communicate.

  18. ESTIMATION CRITERIA OF INVESTMENT INNOVATIVE PROJECTS IN HEALTHCARE SPHERE

    OpenAIRE

    Vadim A. Lomazov; Elena V. Nesterova

    2013-01-01

    The problem of evaluating investment projects in the health sector, implemented on a public-private partnership, is considered. As part of the procedure for constructing estimates is suggested to reveal medical, social, economic, scientific and innovative components of the project as a separate component of the project to be used as the analytic hierarchy subcriteria.

  19. ESTIMATION CRITERIA OF INVESTMENT INNOVATIVE PROJECTS IN HEALTHCARE SPHERE

    Directory of Open Access Journals (Sweden)

    Vadim A. Lomazov

    2013-01-01

    Full Text Available The problem of evaluating investment projects in the health sector, implemented on a public-private partnership, is considered. As part of the procedure for constructing estimates is suggested to reveal medical, social, economic, scientific and innovative components of the project as a separate component of the project to be used as the analytic hierarchy subcriteria.

  20. Firm Readiness Level for Innovation Projects: A New Decision-Making Tool for Innovation Managers

    Directory of Open Access Journals (Sweden)

    Daniel Galvez

    2018-03-01

    Full Text Available Innovation projects represent a major challenge for business managers due to their associated uncertainty degree. The already existing methodologies to support the innovation projects are aimed at piloting them and establishing the management stages in a flexible and agile way during their deployment. This paper proposes a complementary ex-ante methodology that seeks to aid the decision-making of companies to choose whether or not to launch a potential innovation project. This methodology evaluates to what extent the technological system of the company has the minimum required maturity degree of competencies to successfully achieve the innovation project. Thus, in first instance, an innovation project is characterized according to its novelty degree; both inside the company and in its environment. Subsequently, according to the previous characterization, the future project will have an impact on the technological system of the company. The capabilities of the firm are represented by a set of good practices associated with the innovation projects’ management that the company is able to deploy. Finally, the minimum maturity degree required by a particular project of these practices is determined. Then, the gap between the maturity requirement profile and the current profile of the company is established enabling to decide on the implementation of the project or not.

  1. Labor productivity, perceived effectiveness, and sustainability of innovative projects

    NARCIS (Netherlands)

    Makai, P.; Cramm, J.M.; Grotel, M. van; Nieboer, A.P.

    2014-01-01

    OBJECTIVE: To assess labor productivity, perceived effectiveness, and sustainability of a national quality program that sought to stimulate efficiency gains through increased labor productivity while maintaining quality through implementing small-scale innovation projects. DESIGN: Longitudinal

  2. The Role of Demonstration Projects in Construction innovation processes

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is describing the methodology of a case-study approach to the investigation of demonstration projects and their impact on the development of process and product innovations in the construction industry.......The article is describing the methodology of a case-study approach to the investigation of demonstration projects and their impact on the development of process and product innovations in the construction industry....

  3. Balancing Academic Teaching, Research, and Service: a Paradigm Emerging from NSF-TUES Sponsored Project Experiences

    Science.gov (United States)

    De Paor, D. G.

    2012-12-01

    As every academic administrator stresses in interviews with new faculty, the role of a professor today involves balancing three areas - teaching, research, and service. Few institutions can afford the old policy of promoting and tenuring faculty based solely on research output and grantsmanship, whilst ignoring poor teaching outcomes. Outreach activities involving parents and the extramural community are increasingly important as expensive universities and four-year colleges seek to demonstrate their relevance in the age of much less expensive community colleges and distance education. Nevertheless, many faculty complain that teaching and outreach duties compete for their valuable research time. Some fields of research have such broad impacts that they merit the dedicated time of our best scientists. However, other research projects constitute little more than publicly funded professorial hobbies. The challenge is to reliably identify and prioritize the research questions that merit investigation. IN ODU's geospatial visualization group, we instituted a policy requiring Ph.D. theses to include a component (at least one chapter) dedicated to the development and testing of learning resources. TAs test visualizations in their lab sections in tandem with their research studies. They must incorporate original geophysical mapping, modeling, and/or analysis in order to justify a degree in the Physics Department (the traditional home of Geophysics at our institution) rather than, say, the College of Education. Geospatial graduate students also train to offer planetarium presentations to the public using digital full-dome projection technology that can be used with a wide range of geoscience and planetary science topics. Thus they tackle the three aspects of academic work from the outset. In contrast, students in other programs frequently serve as TAs in their first and then switch to grant-supported RA work, resulting in a steady stream of new TAs with little or no

  4. Reports on the research projects in the field of reactor safety sponsored by the Federal Ministry for Science and Technology

    International Nuclear Information System (INIS)

    1977-03-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the safety program 'Reactor Safety' are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT - Secretary of State for Research and Technology). Objective of this program is to continue improving the safety of LWRs, in order to minimize the risk for the environment. With grant assistance from the Bundesminister des Innern (BMI - Secretary of State for Home Affairs) research contracts in the field of reactor safety are being performed. Results of these projects should contribute to resolving questions arising from nuclear licensing procedures. The Forschungsbetreuung (FB - research supervision department) at the Institute for Reactor Safety (IRS), as consultants to BMFT and BMI, provides information about the progress of investigations. Individual reports will be prepared and put into standard forms by the research contractors. Each report gives information on: 1) the work accomplished, 2) the results obtained, 3) the work planned to be continued. Initial reports of research projects describe in addition the purpose of the work. A BMFT-research program on the safety of Fast Breeders (Schneller Brutreaktor - SBR) is presently under discussion. In order to define several problems, investigations included in the present compilation (RS 139, 140, 143, 162) will be previously performed. (orig.) [de

  5. Defensive behaviours in innovation teams: how project teams discuss defensiveness and its relationship with innovation resilience behaviour and project success

    NARCIS (Netherlands)

    Oeij, P.R.A.; Dhondt, S.; Gaspersz, J.B.R.; Vuuren, T. van

    2016-01-01

    Project team members and project leaders of innovation projects were interviewed about the possible presence of defensive behaviours within the team. While investigating defensive behaviour can be done validly by observation techniques, to talk about defensiveness within a team often leads to

  6. Development of Visualizations and Loggable Activities for the Geosciences. Results from Recent TUES Sponsored Projects

    Science.gov (United States)

    De Paor, D. G.; Bailey, J. E.; Whitmeyer, S. J.

    2012-12-01

    Our TUES research centers on the role of digital data, visualizations, animations, and simulations in undergraduate geoscience education. Digital hardware (smartphones, tablets, GPSs, GigaPan robotic camera mounts, etc.) are revolutionizing field data collection. Software products (GIS, 3-D scanning and modeling programs, virtual globes, etc.) have truly transformed the way geoscientists teach, learn, and do research. Whilst Google-Earth-style visualizations are famously user-friend for the person browsing, they can be notoriously unfriendly for the content creator. Therefore, we developed tools to help educators create and share visualizations as easily as if posting on Facebook. Anyone whoIf you wish to display geological cross sections on Google Earth, go to digitalplanet.org, upload image files, position them on a line of section, and share with the world through our KMZ hosting service. Other tools facilitate screen overlay and 3-D map symbol generation. We advocate use of such technology to enable undergraduate students to 'publish' their first mapping efforts even while they are working in the field. A second outcome of our TUES projects merges Second-Life-style interaction with Google Earth. We created games in which students act as first responders for natural hazard mitigation, prospectors for natural resource explorations, and structural geologist for map-making. Students are represented by avatars and collaborate by exchange of text messages - the natural mode of communication for the current generation. Teachers view logs showing student movements as well as transcripts of text messages and can scaffold student learning and geofence students to prevent wandering. Early results of in-class testing show positive learning outcomes. The third aspect of our program emphasizes dissemination. Experience shows that great effort is required to overcome activation energy and ensure adoption of new technology into the curriculum. We organized a GSA Penrose

  7. The Strategic Risk Management at Different Stages of Innovation Project

    Directory of Open Access Journals (Sweden)

    Pysmak Viktoriia O.

    2017-03-01

    Full Text Available This article considers the theoretical principles of the strategic risk management at every stage of innovation project. Relevance of the selected area of research has been substantiated in view of the necessity to provide the theoretical and practical foundations for the strategic risk management of innovation activity. Principles of management of innovation at a contemporary enterprise have been allocated. Analysis of such concepts as «risk», «innovation», «strategic management» was carried out. The concept of «innovation project» has been considered, its features and characteristics have been allocated. The basic tools of the strategic management of enterprise in current conditions have been described. The basic principles of the strategic risk management of innovation activity have been formulated. A scheme with allocating the stages of innovation activity and the risks involved has been elaborated, taking into consideration the factors of occurrence of risks. The main groups of management strategies have been allocated. The tasks facing the managerial board in the process of the strategic risk management at every stage of the innovation project have been formulated.

  8. Management of Innovation Projects in SMEs in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Miroslav Špaček

    2016-04-01

    Full Text Available There is prevailing understanding that large companies are mostly inclined to using sophisticated innovation management processes as well as other management tools like project portfolio management while SMEs are believed to take advantage of more simple and often intuitive approaches to innovation processes management. Therefore methodologies of Monte Carlo simulation (MC, Stage Gate Control Process (SGCP and Post- -implementation review (PIR were reprocessed into more simplistic implementation models so as to prove that these methods can be operated even by routine staffs in Czech SMEs. All the test performed proved that the applications of aforementioned methods increased the effectiveness of innovation projects management and generated added value for shareholders.

  9. Barriers and Facilitators of Collaborative Management in Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Sonia Regina Hierro Parolin

    2013-05-01

    Full Text Available Discussions about innovation tend to a more systemic and cooperative approach in which those networks focused on scientific and technological development are considered. This article aims to identify the barriers and facilitators in the collaborative management process of technological innovation projects and a study has been carried out by the cooperation action for innovation with 17 industries in Brazil. The primary evidence refers to the crucial role of project managers when leading the structural demands, and clarity on the relevance of the communication of strategic guidelines among the organizations involved for the achievement of the results in the industries.

  10. River Protection Project Technology and Innovation Roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

    2017-08-14

    The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

  11. How can innovative project delivery systems improve the overall efficiency of GDOT in transportation project delivery?

    Science.gov (United States)

    2013-04-01

    The USDOT and Federal Highway Administration (FHWA) recommend the smart use of innovative project : delivery systems, such as design-build, to improve efficiency and effectiveness of developing transportation : projects. Although design-build provide...

  12. Governance of innovation project management : necessary and neglected

    NARCIS (Netherlands)

    Stettina, Christoph Johann

    2015-01-01

    The study is motivated by the aspiration to understand project governance in organizations pursuing the development of new products and services across multiple knowledge worker teams. In particular, the following problem statement guides the study: Is governance of innovation project management

  13. Six methodological guidelines for organizing inclusive innovation in BOP projects

    NARCIS (Netherlands)

    Boer, J. de; Steen, M.G.D.; Posthumus, A.L.

    2013-01-01

    Base-of-the-Pyramid (BoP) inclusive innovation projects aim to design, produce and market products and services for large and relatively poor market segments in developing countries, for example for people who have less than several dollars to spend per day. BoP projects have ‘normal’ goals,

  14. Organizing innovation in base-of-the-pyramid projects

    NARCIS (Netherlands)

    Boer, J. de; Steen, M.G.D.; Posthumus, A.L.

    2013-01-01

    Base-of-the-Pyramid (BoP) inclusive innovation projects aim to design, produce and market products and services for large and relatively poor market segments in developing countries, for example for people who have less than several dollars to spend per day. BoP projects have ‘normal’ goals,

  15. Financing innovative technologies in wind projects

    International Nuclear Information System (INIS)

    Vaughan, C.

    2006-01-01

    Methods of market entry and the financing of new technologies were discussed from the perspective of Clipper Windpower, a wind energy company based in the northeastern United States and Canada. Many new technology companies only consider private equity when seeking financing for new product development. However, financing for projects and products is only the first step to market entry. Wind projects are the financial equivalent of a high yield bond with mechanical risk. Many wind power projects with company equity can also be seen as a long term bond with upside in any given year. It is therefore important for wind developers to seek out strategic buyers for both product development and project development, in addition to finding sources of private equity. Clipper Windpower Inc. has developed a partnership with British Petroleum (BP), who hold an equity interest in the company. Both companies are now partnering on projects with Clipper turbines, and firm orders are in place for 2007 and 2008. As a result of the partnership, Clipper now has increased its financial strength in cash flows, balance sheets, and projected revenue. It was concluded that a successful partnership can increase the scale of wind power development, and bring financial sophistication to smaller companies with limited resources. refs., tabs., figs

  16. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2004. Progress report

    International Nuclear Information System (INIS)

    2004-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  17. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2004. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  18. Reinventing project management the diamond approach to successful growth & innovation

    CERN Document Server

    Shenhar, Aaron J.

    2007-01-01

    Projects are the engines that drive innovation from idea to commercialization. In fact, the number of projects in most organizations today is expanding while operations is shrinking. Yet, since many companies still focus on operational excellence and efficiency, most projects fail--largely because conventional project management concepts cannot adapt to a dynamic business environment. Moreover, top managers neglect their company's project activity, and line managers treat all their projects alike--as part of operations. Based on an unprecedented study of more than 600 projects in a variety of businesses and organizations around the globe, "Reinventing Project Management" provides a new and highly adaptive model for planning and managing projects to achieve superior business results.

  19. Leadership in inter-organisational network-based innovation projects

    DEFF Research Database (Denmark)

    Goduscheit, René Chester

    2009-01-01

    The aim of this paper is to contribute to the understanding of interorganisational innovation projects and interorganisational settings as an arena for marketing. The literature review identifies a need to elaborate on the strategic challenges facing an organisation which is seeking to establish ...... a number of findings regarding the involvement of potential partners in the project, intra- and interorganisational anchorage, profile of project managers and management of customer relations within an interorganisational setting.......The aim of this paper is to contribute to the understanding of interorganisational innovation projects and interorganisational settings as an arena for marketing. The literature review identifies a need to elaborate on the strategic challenges facing an organisation which is seeking to establish...

  20. The DIMBI projectinnovative approaches for teaching business informatics

    Directory of Open Access Journals (Sweden)

    Ivan Kuyumdzhiev

    2016-11-01

    Full Text Available The purpose of this article is to collect and analyze data on existing methods of teaching business informatics in leading Bulgarian universities and suggest areas for improvements. Based on a collected data guidelines for innovative teaching methods in the field of BI and DW are developed. Proposed methods are divided in several sections – lectures, exercises (groups’ size, tools used, software, hardware, teaching methods, and real life customers, students’ projects, control methods. The findings of conducted feasibility study show that the business, students and universities need an innovative methodology of teaching business informatics and properly implemented this methodology has a high probability of success. This paper is written within the Erasmus plus KA2 project “Developing the innovative methodology of teaching business informatics” (DIMBI, 2015-1-PL01-KA203-0016636.

  1. Decision models in explorative and exploitative innovation projects: a case study

    NARCIS (Netherlands)

    Wolbers, Michiel; Hofman, Erwin; Halman, Johannes I.M.

    2013-01-01

    Innovation processes are seen as collections of decisions that are made in the context of a single innovation project. Those decisions determine the course and the final success of an innovation project. There is, however, a lack of literature on how decisions are made in innovation projects. In

  2. Xtranormal Learning for Millennials: An Innovative Tool for Group Projects

    Science.gov (United States)

    Stratton, Micheal T.; Julien, Mark

    2014-01-01

    Encouraging students to actively engage with course material is an ongoing challenge for many management educators. One common tactic is to use various technologies that allow tech-savvy Millennial Generation students to take a more active role in their learning. In this article, we describe an innovative group project that challenges students to…

  3. Leading Curriculum Innovation in Primary Schools Project: A Final Report

    Science.gov (United States)

    Brundrett, Mark; Duncan, Diane

    2015-01-01

    This article provides the final report on a research project that investigated the ways in which curriculum innovation can be led successfully in primary schools. Data gathering included 40 semi-structured interviews in 10 successful primary schools in England of varying sizes and types and in a range of geographical and social locations. Findings…

  4. Enhancing the Reflexivity of System Innovation Projects With System Analyses

    NARCIS (Netherlands)

    Mierlo, van B.C.; Arkesteijn, M.C.M.; Leeuwis, C.

    2010-01-01

    Networks aiming for fundamental changes bring together a variety of actors who are part and parcel of a problematic context. These system innovation projects need to be accompanied by a monitoring and evaluation approach that supports and maintains reflexivity to be able to deal with uncertainties

  5. The relationship between servant leadership and employee empowerment, commitment, trust and innovative behaviour: A project management perspective

    Directory of Open Access Journals (Sweden)

    Camilla L. Krog

    2015-10-01

    Full Text Available Orientation: Understanding the relationship between a project sponsor’s servant leadership traits and employee commitment, trust and innovative behaviour. Research purpose: This study aimed to understand the relationship, if any, between a project sponsor’s servant leadership traits of altruistic calling, emotional healing, wisdom, persuasive mapping and organisational stewardship and a project team’s empowerment, commitment, trust and innovative behaviour. Motivation of the study: Most project leadership studies focus on understanding the role and power position of the project manager, with very little research being dedicated to understanding the effect the leadership style has on the project team and project success. Research approach: A survey was conducted amongst a non-probability sample of 48 project team members from amongst a population of 257, comprising project managers, business analysts and IT staff of a medium sized fleet management organisation that is in the process of implementing an entirely new enterprise resource planning system. Main findings: Through inferential statistical analysis, using structural equation modelling and path analysis, it was determined that persuasive mapping has the strongest impact on employee innovative behaviour, followed by employee commitment and trust via the mediator of employee perceived empowerment. Wisdom and organisational stewardship had a negative impact on employee perceived empowerment. Practical/managerial implications: Project sponsors need to exhibit persuasive mapping, altruistic calling and emotional healing traits due to the significant influence that these have on employee innovative behaviour, commitment and trust, albeit through their perceived empowerment. Contribution/value-add: This study contributes to knowledge of leadership, more especially servant leadership and its significance in project management, which knowledge may contribute to project success

  6. Innovation capabilities in food and beverages and technology-based innovation projects

    NARCIS (Netherlands)

    Tepic, M.; Fortuin, F.T.J.M.; Kemp, R.G.M.; Omta, S.W.F.

    2014-01-01

    Purpose - The aim of this paper is to establish the differences between the food and beverages (F&B) and technology-based industries with regards to the relation between previously identified success factors and innovation project performance. Design/methodology/approach - These differences are

  7. Case Study: Applying the Theory of Planned Behavior as Interventions to Increase Sponsored Project Proposal Submissions from Liberal Arts Faculty

    Science.gov (United States)

    Hartmann, Anita

    2011-01-01

    In the current economic climate, many colleges and universities face similar challenges: the need to increase external sponsorship for research activities and the need to benefit from additional indirect cost recovery. Preparing funding proposals for submission to sponsors is a faculty behavior that can be modified by applying behavioral theory to…

  8. Comedy Stages, Poets Projects, Sports Columns, and Kinesiology 341: Illuminating the Importance of Basic Writers' Self-Sponsored Literacies

    Science.gov (United States)

    Roozen, Kevin

    2012-01-01

    Dominant perspectives of basic writers' self-sponsored literacies tend to overlook the important roles such activities can play in literate development. Drawn from texts, interviews, and participant-observations collected during a five-year study, this article continues the examination of the relationship between one writer's curricular and…

  9. EVALUATION CRITERIA OF INNOVATIVE SOCIAL INVESTMENT PROJECTS IN HEALTH CARE

    Directory of Open Access Journals (Sweden)

    Vadim Aleksandrovich Lomazov

    2013-11-01

    Full Text Available Purpose: analysis of key indicators and creation of evaluation criteria of innovative socio-economic investment projects in healthcare, implemented on the basis of public-private partnerships.Methodology: there has been performed comprehensive assessment of specialized socio-economic projects in health sector taking into consideration interests of participants in the project (public and private, main aspects (medical, social, economic, scientific and innovative, and assessment components (presumable effectiveness or risk during implementation of the project. The degree of relative importance of the factors considered in each level, and the levels themselves are determined by experts with the help of paired comparisons method. The values of the project indicators are estimated against nonuniform grading scale, both the results of direct measurements and expert information being used.Results: There has been suggested an approach and a procedure for evaluating projects based on the allocation of interests, issues and evaluation components of the project as sub-criteria levels of the hierarchy analysis method; there has been developed research prototype of information analysis system for assessment of projects on the basis of the proposed approach.DOI: http://dx.doi.org/10.12731/2218-7405-2013-8-48

  10. How Provotypes Challenge Stakeholder Conceptions in Innovation Projects

    DEFF Research Database (Denmark)

    Boer, Laurens

    with developers’ taken-for-granted conceptions about this use context. Design proposals resulting from such projects typically not only embed the ethnographic findings, but also these taken-for-granted conceptions. On the one hand, this can be problematic at the end of the development process (e.g. when a product...... is put on the market and mismatches use context), but on the other hand, it creates an opportunity for reflection on these conceptions when revealed at the front end of innovation projects. Design researchers can play an important role in bringing conceptual tensions between stakeholders......In the context of industrial innovation projects, ethnographic research is often employed to inform and inspire the development of a new product or service which fits the intended use context. However, user conceptions that are revealed through ethnographic research are often at odds...

  11. How Provotypes Challenge Stakeholder Conceptions in Innovation Projects

    DEFF Research Database (Denmark)

    Boer, Laurens

    In the context of industrial innovation projects, ethnographic research is often employed to inform and inspire the development of a new product or service which fits the intended use context. However, user conceptions that are revealed through ethnographic research are often at odds...... is put on the market and mismatches use context), but on the other hand, it creates an opportunity for reflection on these conceptions when revealed at the front end of innovation projects. Design researchers can play an important role in bringing conceptual tensions between stakeholders...... systems. Based on my participation in a project that involved industries in the field of indoor climate, and that employed ethnographic research to inform and inspire the development of new products or services, I develop the approach with respect to contemporary design research concerns, notably...

  12. How Provotypes Challenge Stakeholder Conceptions in Innovation Projects

    DEFF Research Database (Denmark)

    Boer, Laurens

    is put on the market and mismatches use context), but on the other hand, it creates an opportunity for reflection on these conceptions when revealed at the front end of innovation projects. Design researchers can play an important role in bringing conceptual tensions between stakeholders...... with developers’ taken-for-granted conceptions about this use context. Design proposals resulting from such projects typically not only embed the ethnographic findings, but also these taken-for-granted conceptions. On the one hand, this can be problematic at the end of the development process (e.g. when a product......In the context of industrial innovation projects, ethnographic research is often employed to inform and inspire the development of a new product or service which fits the intended use context. However, user conceptions that are revealed through ethnographic research are often at odds...

  13. Building Energy Efficiency through Innovative Thermodevices (BEEIT)

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Y. Sungtaek [Univ. of California, Los Angeles, CA (United States); Dunn, Bruce [Univ. of California, Los Angeles, CA (United States); Pei, Qibing [Univ. of California, Los Angeles, CA (United States); Kim, C. -J. [Univ. of California, Los Angeles, CA (United States)

    2012-12-14

    This is the final scientific/technical report for the project "Compact MEMS Electrocaloric Cooling Module" sponsored by ARAPA-E as part of its Building Energy Efficiency through Innovative Thermodevices (BEEIT) program.

  14. Methodology evaluation of innovative projects under risk and uncertainty

    Directory of Open Access Journals (Sweden)

    2012-09-01

    Full Text Available This article deals with problems connected with the assessment of innovative projects in the context of risk and uncertainty, topical issues of evaluation of innovative projects at the present stage of development of the Russian economy. By the example of the solution of the "crossing the river" is considering the possibility of using hierarchical models to address it. In what follows, and compares the priorities of different groups of factors are given by calculating the overall costs and benefits. The paper provides a rationale for combined use of four aspects: the beneficial aspects of the decision (the benefits and opportunities and negative (costs and risks that may lead to the decision in question.

  15. Establishing and Leveraging networks in design education innovation projects

    OpenAIRE

    Spencer, Nick; Walden, Roderick; Leong, Benny; Bailey, Mark; Aftab, Mersha; University of Technology, Sydney; PolyU, Hongkong

    2014-01-01

    Project networking is the practice of obtaining needed services, ideas, or content by soliciting contributions from individuals, groups and organisations external to a project’s core team. The ability to establish and leverage networks is an increasingly important component of developing open innovation practices within many industries. This research examines the strategies and tactics employed by multidisciplinary undergraduate and postgraduate students to finding, forming and utilising idea...

  16. From innovation to implementation - SME collaboration in student projects

    DEFF Research Database (Denmark)

    Bridgwood, Ian

    The Center for Bachelor of Engineering Studies at the Technical University of Denmark (DTU Diplom) [1] provides B.Eng. programs with the Conceive Design Implement and Operate framework [2] as a central element. Courses are designed to be a source of innovation, particularly in relation to small a...... and medium sized enterprises (SME) in the region. The project based courses teach students to undertake the analysis, design and implementation of systems which are relevant to and in cooperation with SMEs....

  17. Reflexive project management in high-ambition projects : Exploring the competencies for managing innovative sustainable designs

    NARCIS (Netherlands)

    Loeber, A.; Vermeulen, T.

    2016-01-01

    Purpose The Aristotelian notion of phronèsis inspired innovative work in the realm of project management as well as in literature on sustainability and societal transformations. We argue that both literatures may benefit from a dialogue between the two, especially in view of outlining project

  18. Innovative funding solution for special projects: Crowd funding

    Directory of Open Access Journals (Sweden)

    Sentot Imam Wahjono

    2015-06-01

    Full Text Available The aim of this paper is to examine the influence of crowd funding knowledge, applica-tion, platform, and project initiator toward successful crowd funding. This study conducted by quantitative approach, data have been collected with web-based ques-tionnaires via Kickstarter.com direct message and e-mail to 200 successful crowd funding project initiators as a sample and as much 152 sets questionnaire returned by a complete answer and should be analyzed further. Deployment and data collection take 3 month from October to December 2013. This study found evidence that crowd funding knowledge, crowd funding application, crowd funding platform, and project initiator has positive and significant relationship toward the success of crowd funding. The implication from this research is crowd funding can be a source of capital to finance the projects, not just rely on traditional sources of financing just like banking and capital markets. Crowd funding can be innovative funding solution.

  19. Innovation

    African Journals Online (AJOL)

    In order to gain experience in scanning of diverse media, projects have deliberately been kept small. It has been found that management of scanned images is as important as the process of scanning. Adequate planning, correct storage procedures and accurate metadata are essential to the success of a project. Innovation ...

  20. Project-Oriented University – Building the Capability for Innovation

    Directory of Open Access Journals (Sweden)

    Paul DOBRESCU

    2009-01-01

    Full Text Available Global economy is increasingly a knowledge economy, making people’s skills and qualifications more important than traditional power indicators such as territory, geography, natural resources. Globalization imposes new rhythms of performance to every economic or social field. Higher education is no exception to this, since it lies at the interface with the external environment, where skills and qualifications will be used and exploited for economic benefits. Universities are under a two-fold pressure. First, they provide services, knowledge, skills for fast-moving sectors. The knowledge and skills may quickly become obsolete and irrelevant for the economy. Second, universities need to innovate and to adapt to situations of constant change. Both types of pressure force universities to develop their capability for innovation, which becomes a prerequisite for survival. The purpose of this paper is to explain the concept of projectoriented university as a type of university that explicitly uses projects to perform processes of medium to high complexity, thus allowing it to deal with the increasing turbulence and dynamics of its environments. This concept is premised on the idea that there is a connection between a university’s maturity in project management and its managerial competitiveness and innovativeness. The concept inherits the conceptual core of the model of the projectoriented company and it comprises two components. The former is concerned with the structural dimensions of project management, “the hard” component – processes, procedures, organizational structures, terminology. The latter is concerned with the social dimension of project management, the “soft” component – skills, attitudes, competences, project management culture. Empirical results are considered representative for the Romanian higher education system as a whole, with due nuances and exceptions.

  1. NASA Game Changing Development Program Manufacturing Innovation Project

    Science.gov (United States)

    Tolbert, Carol; Vickers, John

    2011-01-01

    This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

  2. OPEN INNOVATION PROJECT: THE SYSTEM OF ONLINE INDICATORS IN SCIENCE, TECHNOLOGY AND INNOVATION OF AMAZONAS (SiON

    Directory of Open Access Journals (Sweden)

    Moises Andrade Coelho

    2016-05-01

    Full Text Available This study aims to evaluate the implementation of an open innovation project in a public institution in the state of Amazonas. The theoretical and empirical background deals with science, technology and innovation indicators and open innovation. The study is characterized as a qualitative and descriptive research, with the case study as a methodological procedure. The delimitation of the universe was composed by a public institution in the area of science, technology and innovation (ST&I. In the case study, it was used an approach as tool to assess the implementation of open innovation projects. The results are shown several stages of open innovation project analyzed.  The study demonstrates the implications of open innovation project adoption to the strengthening of external networks and the maturing of the internal environment. The relevance of the study is based on the evaluation of an open innovation project in a public institution in order to foster the transition from traditional innovation processes to open innovation processes.

  3. H-CARE PROJECT - AN INNOVATIVE EUROPEAN TRAINING PROGRAMME

    Directory of Open Access Journals (Sweden)

    Gabriela CIOBANU

    2015-04-01

    Full Text Available An innovative European training programme for salespersons of medical devices, assistivetechnologies and food supplements was launched in 2014 with 6 partners from 5 European Union countries (Turkey, Bulgaria, Romania, Austria and Belgium. The project, called “Launching of Sector Skills Alliance for Training and Apprenticeship of Health Care and Food Supplements Salespersons” (H-CARE, contributes to the Europe 2020 growth strategy in particular to the European Union’s employment rate target of 75% by 2020, by helping people learn new skills and adapt to changes in the labor market. By development of a new occupational job profile in Health Care Sales the project will encourage the employment in this sector. The project offers exactly new skills for new jobs Agenda, providing opportunities for the inclusion of unemployed or low paid people in the European Union job market.

  4. Technology Education in South Africa: Evaluating an Innovative Pilot Project

    Science.gov (United States)

    Stables, Kay; Kimbell, Richard

    2001-02-01

    Researchers from Goldsmiths College were asked to undertake an evaluation of a three year curriculum initiative introducing technology education, through a learner-centred, problem solving and collaborative approach. The program was developed in a group of high schools in the North West Province of South Africa. We visited ten schools involved in the project and ten parallel schools not involved who acted as a control group. We collected data on student capability (demonstrated through an innovative test activity) and on student attitudes towards technology (demonstrated in evaluation questionnaires and in semi-structured interviews). Collectively the data indicate that in areas of knowledge and skill and in certain aspects of procedures (most notably problem solving) the project has had a marked impact. We also illustrate that greater consideration could have been given in the project to developing skills in generating and developing ideas and in graphic communication. Gender differences are noted, particularly in terms of positive attitudes illustrated by both boys and girls from schools involved in the project. Attention is drawn to the critical impact the project has had on transforming the pedagogy of the teachers from a teacher-centred didactic model, to a learner-centred, problem solving model. Some wider implications of the successes of this project are debated.

  5. How Provotypes Challenge Stakeholder Conceptions in Innovation Projects

    DEFF Research Database (Denmark)

    Boer, Laurens

    systems. Based on my participation in a project that involved industries in the field of indoor climate, and that employed ethnographic research to inform and inspire the development of new products or services, I develop the approach with respect to contemporary design research concerns, notably...... the research areas of critical design and participatory innovation. I propose provotypes as ethnographically rooted, technically working, robust artefacts that deliberately challenge stakeholder conceptions by reifying tensions that surround a use context of organizational interest. I show how provotypes can...

  6. Annual report on reactor safety research projects sponsored by the Minister for Research and Technology of the Federal Republic of Germany 1989

    International Nuclear Information System (INIS)

    1990-08-01

    Investigations on the safety of light water reactors (LWR) being performed in the framework of his research program on reactor safety are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT) (Federal Minister for Research and Technology). Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks also projects on the safety of advanced reactors are sponsored by the BMFT. The Gesellschaft fuer Reaktorsicherheit (GRS), (Society for Reactor Safety), by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the Forschungsbetreuung at the GRS, (FB) (Research Coordination Department), within the framework of general informations of progress in reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. (orig./HP)

  7. Innovative Startup-Projects: Experience, Evaluation, Implementation Contradictions

    Directory of Open Access Journals (Sweden)

    Inshakov Maksim Olegovich

    2015-09-01

    Full Text Available Innovative companies in the conditions of global post-crisis economic recovery and increased economic activity become again a promising area for investments of large investment and venture capital funds, venture divisions of large transnational corporations, business angels and other private investors. This is confirmed by the data on the increase in the volume of venture capital market in the US and Europe and on a significant increase in the cost of the leading foreign and Russian start-up companies which are rated as of 2014 in the present article. The comparative analysis of the leading Russian and foreign start-ups showed the prevalence of companies engaged in the field of IT-Internet-Mobile and focused on the provision of various kinds of innovative services to consumers among the foreign participants of the rating. Among Russian startups-winners the companies of technological orientation (biological, medical, and “clean” technologies dominate. They reflect the increasing importance of start-ups in the innovative development of the Russian economy. Participation in such competitions and ratings is a favorable factor of promoting start-ups, increasing awareness of potential investors and consumers of start-up products. The importance of start-ups formation and the development of effective regional and national innovation systems update the studies related to the identification of the fundamental contradictions in the activities of Russian start-ups and to the development of recommendations for their resolution. The article identifies the key issues of economic, organizational, informational and marketing character causing the collapse of start-up projects in the Russian economy in modern conditions.

  8. Innovation

    African Journals Online (AJOL)

    ... libraries as support for the reading intervention is also an important part of the project. The focus of this article is on the use of family literacy workshops to introduce the reading programme and the fledgling school libraries to parents and the potential role of the school library in supporting reading activities. Innovation Vol.

  9. Project Management as an instrument to support innovation for country development – Macedonia case study

    OpenAIRE

    Dzidrov, Misko

    2017-01-01

    East European countries are all in the group of modest innovators by the Global Entrepreneurship Monitor and they all have slight improvements in the recent years. They all have some government programmes to support innovation and entrepreneurship. Project management was used as an instrument with some features that can help bust new innovation product development and with that to help the economies to become Innovation-driven Economies. Project management with some features helps the innovat...

  10. Innovative solutions and strategic alliances smooth adoption of efficiency projects

    Energy Technology Data Exchange (ETDEWEB)

    Hoshino, P

    1994-04-01

    Natural Resources Canada (NRCan), through its energy efficiency initiatives, is encouraging organizations across Canada to improve their use of energy and reduce energy waste. A review is presented of the programs NRCan conducts in this field. The Energy Innovators Venture's (EIV) purpose is to mobilize targetted sectors across Canada to contribute to a reduction in harmful emissions and at the same time view energy efficiency as a means to improve bottom-line economics. The venture identifies why organizations have not undertaken, or seem reluctant to undertake, measures for improved energy efficiency, and looks for ways to facilitate project undertakings by major energy consumers. The venture is the prototype for a new approach to government action, most clearly characterized as working with partners to establish, understand and achieve shared objectives. Strategic partnering with a broad range of allies facilitates economies of scale in developing solutions to the barriers to energy efficiency improvement. The Federal Buildings Initiative targets the federal governmental sector in much the same manner as the EIV. With ca 50,000 or more facilities across the country, this sector represents a significant energy efficiency challenge. The Industrial Energy Efficiency Initiative is pointedly directed at strengthening the competitiveness of Canadian industry, however because this sector accounts for 35% of Canadian energy consumption, also has the potential for a major impact on energy efficiency objectives. A brief case study is presented of energy innovation at a Quebec hospital complex.

  11. Fusion Simulation Project. Workshop sponsored by the U.S. Department of Energy Rockville, MD, May 16-18, 2007

    International Nuclear Information System (INIS)

    2007-01-01

    The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel (Journal of Fusion Energy 20, 135 (2001)) recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts (Journal of Fusion Energy 23, 1 (2004)). The current FSP planning effort involved forty-six physicists, applied mathematicians and computer scientists, from twenty-one institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a three-day workshop in May 2007.

  12. Fusion Simulation Project. Workshop Sponsored by the U.S. Department of Energy, Rockville, MD, May 16-18, 2007

    International Nuclear Information System (INIS)

    Kritz, A.; Keyes, D.

    2007-01-01

    The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel [Journal of Fusion Energy 20, 135 (2001)] recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts [Journal of Fusion Energy 23, 1 (2004)]. The current FSP planning effort involved forty-six physicists, applied mathematicians and computer scientists, from twenty-one institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a three-day workshop in May 2007

  13. Fusion Simulation Project. Workshop Sponsored by the U.S. Department of Energy, Rockville, MD, May 16-18, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Kritz, A.; Keyes, D.

    2007-05-18

    The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel [Journal of Fusion Energy 20, 135 (2001)] recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts [Journal of Fusion Energy 23, 1 (2004)]. The current FSP planning effort involved forty-six physicists, applied mathematicians and computer scientists, from twenty-one institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a three-day workshop in May 2007.

  14. Fusion Simulation Project. Workshop sponsored by the U.S. Department of Energy Rockville, MD, May 16-18, 2007

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-05-16

    The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel [Journal of Fusion Energy 20, 135 (2001)] recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts [Journal of Fusion Energy 23, 1 (2004)]. The current FSP planning effort involved forty-six physicists, applied mathematicians and computer scientists, from twenty-one institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a three-day workshop in May 2007.

  15. Project and Innovation Management in New Product Development Processes

    DEFF Research Database (Denmark)

    Henriksen, Leif; Gayretli, Ahmet

    2010-01-01

    Although the process of innovation is one of the most important drivers behind the growth and prosperity of today’s global economy, it is one of the least understood. This paper aims to address specific problems in carrying out new product development processes. There are crucial issues related...... to product design processes like inefficient project management, increasing product complexity, conflict management, shortfall of existing methods and tools, and high failures in new product introduction. A new approach has been proposed for a system based platform, which consist of a product platform......, a process platform, and a technology platform. Even if there is no single solution to these complex problems the proposed method can offer a more structured way of attacking the issues....

  16. The snake geothermal drilling project. Innovative approaches to geothermal exploration

    Energy Technology Data Exchange (ETDEWEB)

    Shervais, John W. [Utah State Univ., Logan, UT (United States); Evans, James P. [Utah State Univ., Logan, UT (United States); Liberty, Lee M. [Boise State Univ., ID (United States); Schmitt, Douglas R. [University of Alberta, Canada; Blackwell, David D. [Southern Methodist Univ., Dallas, TX (United States)

    2014-02-21

    The goal of our project was to test innovative technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correlate lithologies observed in core with surface based geophysical studies. Compiled data included geologic maps, volcanic vent distribution, structural maps, existing well logs and temperature gradient logs, groundwater temperatures, and geophysical surveys (resistivity, magnetics, gravity). New data included high-resolution gravity and magnetic surveys, high-resolution seismic surveys, three slimhole test wells, borehole wireline logs, lithology logs, water chemistry, alteration mineralogy, fracture distribution, and new thermal gradient measurements.

  17. The second Euratom sponsored 9000C HTR fuel irradiation experiment in the HFR Petten Project E 96.02: Pt.2. Post-irradiation examination

    International Nuclear Information System (INIS)

    Roettger, R.; Bueger, J. de; Schoots, T.

    1977-01-01

    A large variety of HTR fuel specimens, loose coated particles, coupons and compacts provided by Belgonucleaire, the Dragon Project and the KFA Juelich have been irradiated in the HFR at Petten at about 900 0 C up to a maximum fast neutron fluence of about 7x10 21 cm -2 (EDN) as a Euratom sponsored experiment. The maximum burn-ups were between 11 and 18.5% FIMA. The results of the post-irradiation examinations, comprising visual inspection, dimensional measurements, microradiography, metallography, and burn-up determinations are presented in this part 2 of the final report. The examinations have shown that the endurance limit of most of the tested fuel varieties is beyond the reached irradiation values

  18. Business planning innovative projects: the essence of technology, advantages and disadvantages

    OpenAIRE

    S.V. Knyaz; N.G. Georgiadi; Y.S. Bogiv

    2012-01-01

    The article substantiates the necessity to develop technology business planning innovative projects. Arguments made by the ground analysis of the advantages and disadvantages of existing business planning technologies.

  19. Research in progress: FY 1984. Summaries of projects sponsored by the Office of Health and Environmental Research

    International Nuclear Information System (INIS)

    1983-12-01

    This report provides a compilation of summaries of the research projects supported by the Office of Health and Environmental Research (OHER) during Fiscal Year 1984. OHER is a component of the Office of Energy Research within the US Department of Energy, responsible for developing a comprehensive understanding of the health and environmental effects of energy technology development and use as well as other Departmental operations. The OHER program is broad in scope and diverse in character with substantial commitments to both applied and basic research. The research projects have been organized to reflect the major themes and focus of the OHER program. Each research category is preceeded by a short narrative to provide some perspective of the scope of activities which follow. Within each research category, the summaries are organized by efforts performed in DOE laboratories (onsite laboratories) and those performed elsewhere (offsite contractors) to help characterize their respective role in the program. The compilation of project titles and summaries, despite its volume, is still a relatively superficial source of information. It does not provide a sound basis for considering program quality or even relevance

  20. Official notice concerning public financing of multi-contractor research projects within the framework of government-sponsored research activities in the field of superconductors and low-temperature technology

    International Nuclear Information System (INIS)

    1990-01-01

    Public funding is available for research activities taken over jointly by various contractors within a given research project, to be prepared, applied for, and carried out by contractors from industry, research institutes, and university institutes. The project sponsor is VDI-Technologiezentrum - Physikalische Technologien - Graf-Recke-Str. 84, 4000 Duesseldorf. (orig./HP) [de

  1. Open Innovation Projects in SMEs as an Engine for Sustainable Growth

    Directory of Open Access Journals (Sweden)

    Byungun Yoon

    2016-02-01

    Full Text Available Most innovation activities that are inevitable for sustainable growth are coordinated via research and development (R&D projects, which can differ widely in terms of both project and open innovation characteristics, even when conducted within the same firm. Therefore, it is important to consider the peculiarities of R&D projects when evaluating the performance of open innovation strategies, as well as to explore how the benefits and costs of open innovation are shaped by cross-level interactions. This study identifies the differences between successful and unsuccessful open innovation projects, in both firm-level and project-level terms. We focus on small and medium enterprises (SMEs, which usually lack the full set of internal resources and competences required to effectively develop, produce, and commercialize their innovations, and thus must adopt open innovation approaches more actively for sustainability. Adopting an empirical approach, we conducted a survey of 517 Korean SMEs and analyzed 241 successful and unsuccessful open innovation projects in depth. By combining measurements at the firm and project levels, this study provides new insight into the intra-organizational challenges of implementing open innovation projects, which are not only helpful to strategic decision-makers in SMEs, but also to those who make policies for them.

  2. Key Success Factors of Innovation Projects of Vegetable Breeding Companies in China

    NARCIS (Netherlands)

    Liu Zhen, Zhen; Kemp, R.G.M.; Jongsma, M.A.; Huang, Caicheng; Dons, J.J.M.; Omta, S.W.F.

    2014-01-01

    The vegetable breeding industry is generally recognized as an innovation-driven industry. However, innovation is costly, time-consuming and uncertain. This study aims to identify the key success factors of innovation project performance of vegetable breeding companies (VBCs) in China. Based on

  3. International project on innovative nuclear reactors and fuel cycles

    International Nuclear Information System (INIS)

    Mourogov, V. M.; Juhn, P. E.

    2003-01-01

    In response to two IAEA General Conference Resolutions in September 2000, the IAEA has launched the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) in May 2001. As of February 2003, 12 IAEA Member States and the European Commission have become members of INPRO. In total, 19 cost-free experts have been nominated by these Member States and the European Commission to work for the INPRO project at the IAEA. Four meetings of the INPRO Steering Committee (SC), which is the decision and review body of INPRO, were held, two in 2001 and another two in 2002. The objective of INPRO, which is composed of two phases (Phase 1 and Phase 2), is to support safe, economic and proliferation resistant use of nuclear technology, in a sustainable manner, to meet the global energy needs in the next 50 years and beyond. During Phase 1, work is also subdivided in two sub phases: The currently on-going Phase 1A is focussing on the selection of criteria and development of methodologies and guidelines for the comparison of different reactor and fuel cycle concepts and approaches, taking into account the compilation and review of such concepts and approaches, and determination of user requirements in the areas of economics; environment; safety; proliferation-resistance; and cross cutting issues. The preliminary results of Phase 1A with respect to user requirements are summarized in the paper

  4. International collaboration in engineering projects on product innovation.

    NARCIS (Netherlands)

    Dr.Ir. Hay Geraedts

    2013-01-01

    Nowadays companies need higher educated engineers to develop their competences to enable them to innovate. This innovation competence is seen as a remedy for the minor profitable business they do during the financial crises. Innovation is an element to be developed on the one hand for big companies

  5. Illinois Innovation Talent Project: Implications for Two-Year Institutions

    Science.gov (United States)

    Tyszko, Jason A.; Sheets, Robert G.

    2012-01-01

    There is a growing consensus that the United States and its regions, including the Midwest region, will increasingly compete on innovation. This also is widely recognized in the business world. There is also growing consensus that innovation talent--the human talent to drive and support innovation--will be a major key. Despite this consensus,…

  6. International project on innovative nuclear reactors and fuel cycles (INPRO)

    International Nuclear Information System (INIS)

    Omoto, A.

    2006-01-01

    The IAEA's project INPRO was initiated in order to provide a forum for discussion of experts and policy makers on all aspects of nuclear energy planning as well as on the development and deployment of innovative nuclear energy systems (INS). It brings together technology holders users and potential users to consider jointly the international and national actions required for achieving desired innovations in nuclear reactors and fuel cycles, but it pays particular attention to the needs of developing countries. Currently INPRO members count 24 including even three countries, which are not yet operating nuclear reactors. Its initial phase has produced an outlook into the future of the energy markets and defined basic principles, user requirements and criteria in the following areas as TECDOC1362 in June 2003; Economics, Environment, Fuel Cycle and Waste, Safety, Proliferation Resistance and Crosscutting Issues. This assessment methodology can be applied for screening an INS, comparing different INS to find a preferred INS consistent with the needs of a given state, and identifying RD and D needs. The methodology has be validated through case studies and updated as TECDOC1434 in December 2004. Currently, besides producing a manual for each chapter of TECDOC1434, six assessment studies of various INS options are being carried out and the number of such studies is increasing. Further several tasks are ongoing including modeling and analysis of global and regional balance of resources and INS deployment scenarios in order to gain the better perspective of future implication of INS deployment as well as to identify challenges and opportunities of INS. It is envisioned that INPRO will continue to develop with three planned major pillars of activity; methodology, infrastructure and coordination for planning of R and D activities. The paper discusses the progress and status of INPRO as well as the future prospect of INPRO activities

  7. THE RISKS’ ASSESSMENT IN INNOVATIVE PROJECTS BY THE METHOD OF VERIFIED EQUIVALENTS

    Directory of Open Access Journals (Sweden)

    Анатолій Валентинович ШАХОВ

    2017-03-01

    Full Text Available The article describes the concept of "risk of innovation", identified the causes of the risk and the methods of eliminating of negative manifestations of the risk situations in innovative projects. The advantages and disadvantages of the method of correction of the discount rate and the method of equivalent annuities are considered. The methodical approach in assessing the expected effect of the innovative project based on the concept of probability-interval uncertainty is proposed in the article. It was established that the analyzed approaches can be used for the accounting of the risk of innovative projects. Project manager makes his choice using any method of risk assessment individually, depending on the extent and characteristics of the project, the degree of novelty and scale introduction of innovative products, the number of participants and the level of requirements of the foundation of project efficiency and other factors.

  8. Determinants for Failure and Success of Innovation Projects: The Road to Sustainable Educational Innovation

    Science.gov (United States)

    Kirschner, P. A.; Hendricks, M.; Paas, F.; Wopereis, I.; Cordewener, B.

    2004-01-01

    Robert Burns wrote: "The best laid schemes of Mice and Men oft go awry". This could be considered the motto of most educational innovation. The question that arises is not so much why some innovations fail (although this is very important question), but rather why other innovations succeed? This study investigated the success factors of…

  9. Proposal for an IAEA - sponsored project of interregional co-operation for training of nuclear scientists in developing countries, using the expertise available in the nuclear data field

    International Nuclear Information System (INIS)

    Kocherov, N.; Schmidt, J.J.

    1980-07-01

    During the Winter College on Nuclear Physics and Reactors jointly organized by the IAEA and the International Centre for Theoretical Physics (ICTP) in January - March 1980 and held at the ICTP in Trieste, a Working Group was convened from participants in the Interregional Advanced Training Course on Applications of Nuclear Theory to Nuclear Data Calculations for Reactor Design. The Working Group examined the current fast neutron nuclear data requirements for nuclear technologies and discussed possible means to meet these requirements, with a major emphasis on the possible contributions by and benefit for the developing countries. The Working Group concluded that the organisation of an IAEA-sponsored Project of Interregional Co-operation for Training of Nuclear Scientists in Developing Countries, Using the Expertise Available in the Nuclear Data Field, would be the best solution to cope with the problems in question and drafted an outline of the technical programme and organization of such a project the revised version of which is presented in this report

  10. Using Sales Management Students to Manage Professional Selling Students in an Innovative Active Learning Project

    Science.gov (United States)

    Young, Joyce A.; Hawes, Jon M.

    2013-01-01

    This paper describes an application of active learning within two different courses: professional selling and sales management. Students assumed the roles of sales representatives and sales managers for an actual fund-raiser--a golf outing--sponsored by a student chapter of the American Marketing Association. The sales project encompassed an…

  11. Innovative Organization of Project Activity of Construction Students

    Science.gov (United States)

    Stolbova, I. D.; Aleksandrova, E. P.; Krainova, M. N.

    2017-11-01

    The construction industry competitiveness depends on its equipping with information modeling technologies. This requires training and development of human resources. The advantages of BIM-technologies are considered. The requirements for the specialists capable of promoting information modeling technologies in the construction industry are discussed. For a wide application of BIM-technologies, the problem of training personnel with a new thinking must be solved. When preparing graduates of the major “Construction”, it is necessary to introduce innovative educational technologies aimed at building the students’ ability for team work, competences in the field of modern information and communication technologies, as well as design skills basing on spatial modeling. Graphic training is the first discipline of the professional orientation for construction students. In the context of training it is important to create such learning environment that is close to a professional one. The paper provides the examples of practice-oriented assignments based on the project method in the course of students’ independent work.

  12. Participation of non-banking financial organisations in crediting innovation projects

    Directory of Open Access Journals (Sweden)

    Duba Olexandr M.

    2014-01-01

    Full Text Available The article describes main results of study of non-banking financial institutions as creditors of innovation projects. Based on the analysis of their investment activity, the article identifies their place and role in financing innovations. The article also compares banks and non-banking financial institutions as participants of innovation projects. On the basis of statistical data it characterises the modern state of non-banking financial institutions in the market of crediting innovation projects and forecasts their further functioning and status by pessimistic, realistic and optimistic scenarios. In order to achieve the level of realistic scenario of development of the non-banking financial institutions in innovation projects, the article offers a plan of organisation of participation of non-banking financial institutions in innovation projects. Crediting innovation projects by non-banking intermediaries has not only commercial but mostly social effect, since their realisation gradually brings the country’s economy to a qualitatively new technical and technological level. Earlier, scientists paid significant attention to banks as main creditors, leaving non-banks aside. The article shows advantages of participation of non-banking financial institutions compared to banks, which seems valuable from the point of view of development of this issue in the financial science environment. The prospective direction here is a study of banks and non-banking financial institutions as competitors in the market of crediting innovation projects.

  13. Medicare Demonstration Projects and Evaluation Reports

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) conducts and sponsors a number of innovative demonstration projects to test and measure the effect of potential...

  14. Resilient behaviour in innovation teams for better project results

    NARCIS (Netherlands)

    Oeij, P.R.A.

    2017-01-01

    Extenden abstract. Organising in a mindful way is a central aspect to making innovation teams become more resilient and enahnce their chances of innovation success. Such organising, called mindful infrastructure, implies creating the right conditions for teams to excel. Four elements are crucial to

  15. Efficient Triple Helix collaboration fostering local niche innovation projects

    DEFF Research Database (Denmark)

    Brem, Alexander; Radziwon, Agnieszka

    2017-01-01

    the entire innovation process. The selected case offers insights of how and why such initiative could emerge, as well as discusses its implications for future technological innovations and in particular those that are about to emerge in regional entrepreneurial ecosystems. Networking, win...

  16. The Projected Responses of Residency-Sponsoring Institutions to a Reduction in Medicare Support for Graduate Medical Education: A National Survey.

    Science.gov (United States)

    Riaz, Mahrukh; Palermo, Tia; Yen, Michael; Edelman, Norman H

    2015-10-01

    To assess the projected responses of residency-sponsoring institutions to the proposed reduction in Medicare's indirect medical education (IME) payments. In 2012, the authors surveyed directors of graduate medical education (GME) programs, examining (1) overall responses to a reduction in IME reimbursement and (2) the value of individual residencies to the institution from the economic/operational and educational/public service points of view, to determine which programs may be at risk for downsizing. Responses from 192 of 555 institutions (35% response rate) varied by the size of the institution's GME program. Of large programs (six or more residencies), 33 (33%) would downsize at a 10% reduction in IME reimbursement, focusing cuts on specific programs. Small programs (five or fewer residencies) were more likely to retain their existing residencies with modest IME payment reductions and to make across-the-board cuts. The economic/operational value of specialties varied widely, with hospital-intensive residencies valued highest. Family medicine was valued highly from an economic/operational point of view only by small programs. Educational/public service value scores varied less and were higher for all specialties. Preventive medicine was not highly valued in either category. Even a modest decrease in IME reimbursement could trigger institutions to downsize their GME programs. Programs at the greatest risk for cuts may be those with modest economic/operational value but high societal value, like family medicine. The retention or expansion of training in family medicine may be most easily accomplished then at smaller institutions.

  17. Jointly Sponsored Research Program

    Energy Technology Data Exchange (ETDEWEB)

    Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

    2009-03-31

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

  18. Voices Project: Technological Innovations in Social Inclusion of People with Visual Impairment

    Directory of Open Access Journals (Sweden)

    Janaina Cazini

    2013-04-01

    Full Text Available This article aims to analyze how technological innovations are contributing to inclusion of people with disabilities in society and at work, from the study of social innovations, assistive technology and digital inclusion presented in a case study on the Voices Project. The project, developed in partnership with the Association of Parents and Friends of the Blind and the Federal Technological University of Paraná, in the years 2008/2009, made a computer course for people with visual impairments. The theoretical survey and project data confirmed that social innovations really are essential tools for digital inclusion of people with disabilities contributing thus to their inclusion in the workplace.

  19. Experiences of technology-rich innovation in European schools within the Open Discovery Space project

    Directory of Open Access Journals (Sweden)

    Sonia PEINADO

    2015-11-01

    Full Text Available The Open Discovery Space (ODS project was conceived to introduce innovative resource-based teaching and learning practices in European schools, to promote the creation of communities between European school members and to boost the demand for open educational resources among teachers. After 3 years of applying the ODS innovation model, more than 2,000 European schools have carried out diverse experiences of technology-rich innovation to achieve the project aims. This paper describes the experiences and results of ODS in 7 different European countries, along with the international activities that aim at expanding the scope of the project beyond the European limits.

  20. Innovation

    Science.gov (United States)

    EPA frames innovation as critical to the protection of human health and the environment through initiatives such as sustainable practices, innovative research, prize competitions, innovation awards, partnerships, and community activities.

  1. How should grid operators govern smart grid innovation projects? An embedded case study approach

    NARCIS (Netherlands)

    de Reuver, G.A.; van der Lei, T.E.; Lukszo, Z.

    2016-01-01

    Grid operators increasingly have to collaborate with other actors in order to realize smart grid innovations. For routine maintenance, grid operators typically acquire technologies in one-off transactions, but the innovative nature of smart grid projects may require more collaborate

  2. Project innovation through exploration and exploitation: requirements practice in large-scale IS development environments

    NARCIS (Netherlands)

    Hansen, S.; Lyytinen, K.; Avital, M.

    2009-01-01

    The exploration of new opportunities and the exploitation of existing competencies represent two competing logics for innovation and change within organizations. IS projects seeking to foster innovation need to balance these forces, and recognize the distinct role that each plays. Through its

  3. The Corruption of a Research Design: A Case Study of a Curriculum Innovation Project.

    Science.gov (United States)

    Cline, Hugh F.; Mandinach, Ellen B.

    This chapter describes the corruption of research design and explains why and how a computer-based curriculum innovation project was transformed from a quasi-experimental design to a comparative case study. The first section introduces the Systems Thinking and Curriculum Innovation Network (STACI) that examined the impact of technology on teaching…

  4. Comparing private label and manufacturer brand innovation projects in a Dutch food processing company

    NARCIS (Netherlands)

    Omta, S.W.F.; Fortuin, F.T.J.M.

    2014-01-01

    The time when private labels consisted only of low-priced, low-quality products has long gone. A new type of cooperative innovation project has emerged in which food processors and retailers work closely together to target consumers with new and innovative products. These so-called high-end private

  5. An Innovative, Experiential-Learning Project for Sales Management and Professional Selling Students

    Science.gov (United States)

    Chapman, Joseph; Schetzsle, Stacey; Wahlers, Russell

    2016-01-01

    This article presents an innovative, experiential-learning project that incorporates students from two different courses: sales management and professional selling. Sales management students actually manage sales students on an outside sales project. Students apply classroom knowledge to a real-life sales project for a local community…

  6. THE APPLICATION OF FORESIGHT PROJECTS IN FORMATION OF TECHNOLOGICAL COMPANIES’ INNOVATION DEVELOPMENT STRATEGY

    Directory of Open Access Journals (Sweden)

    M. E. Zolotareva

    2016-01-01

    Full Text Available In the article is considered the possibility of application of methodology of foresight to the formation of strategy of innovative development of technological companies. The application of existing approaches to defining targets and goals of innovation development does not meet the requirements of the nonlinearity of the modern processes of technological companies’ innovation development.The goals and objectives. The purpose of this article is to study the possibilities of application of methods of foresight in forming of technological companies’ innovation development strategy. To achieve the goal, the author has solved the following problems: considered the interrelationship and interdependence between corporate strategy and technological companies’ innovation development strategy; defined the main problems of formation technological companies’ innovation development strategies; revealed the concept of "foresight" and diff erence in methodology of foresight and traditional forecasting techniques; defined the basic principles of foresight; presents the main stages of the foresight project implementation in technological companies.Research methods. The theoretical basis of the study are the publications of Russian and foreign scientists in the field of formation and development of innovation strategies through the application of foresight methods at the level of national innovation system and at company level. As a methodological basis of the study used methods of analysis, synthesis, induction method, deduction method, the comparison, was applied certain aspects of the synergetic analysis.Summary. The results of Russian and foreign researchers systematized by author confirm the possibility and necessity foresight projects implementation in formation and adjustment of technological companies’ innovation development strategies and in the national innovation system development. The principles of engagement of various social forces

  7. Innovation in Scholarly Communication Vision and Projects from High-Energy Physics

    CERN Document Server

    Heuer, Rolf-Dieter; Mele, Salvatore

    2008-01-01

    Having always been at the forefront of information management and open access, High-Energy Physics (HEP) proves to be an ideal test-bed for innovations in scholarly communication including new information and communication technologies. Three selected topics of scholarly communication in High-Energy Physics are presented here: A new open access business model, SCOAP3, a world-wide sponsoring consortium for peer-reviewed HEP literature; the design, development and deployment of an e-infrastructure for information management; and the emerging debate on long-term preservation, re-use and (open) access to HEP data.

  8. Innovation in scholarly communications. Vision and projects from High-Energy Physics

    Energy Technology Data Exchange (ETDEWEB)

    Heuer, R.D.; Holtkamp, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Mele, S. [European Organization for Nuclear Research (CERN), Geneva (Switzerland)

    2008-05-15

    Having always been at the forefront of information management and open access, High-Energy Physics (HEP) proves to be an ideal test-bed for innovations in scholarly communication including new information and communication technologies. Three selected topics of scholarly communication in High-Energy Physics are presented here: A new open access business model, SCOAP, a world-wide sponsoring consortium for peer-reviewed HEP literature; the design, development and deployment of an e-infrastructure for information management; and the emerging debate on long-term preservation, re-use and (open) access to HEP data. (orig.)

  9. Innovation in scholarly communication: Vision and projects from high-energy physics

    International Nuclear Information System (INIS)

    Heuer, R.D.; Holtkamp, A.; Mele, S.

    2008-05-01

    Having always been at the forefront of information management and open access, High-Energy Physics (HEP) proves to be an ideal test-bed for innovations in scholarly communication including new information and communication technologies. Three selected topics of scholarly communication in High-Energy Physics are presented here: A new open access business model, SCOAP, a world-wide sponsoring consortium for peer-reviewed HEP literature; the design, development and deployment of an e-infrastructure for information management; and the emerging debate on long-term preservation, re-use and (open) access to HEP data. (orig.)

  10. DEVELOPMENT OF METHODOLOGY FOR THE CALCULATION OF THE PROJECT INNOVATION INDICATOR AND ITS CRITERIA COMPONENTS

    Directory of Open Access Journals (Sweden)

    Mariya Vishnevskaya

    2017-12-01

    Full Text Available Two main components of the problem studied in the article are revealed. At the practical level, the provision of the convenient tools allowing a comprehensive evaluation the proposed innovative project in terms of its possibilities for inclusion in the portfolio or development program, and on the level of science – the need for improvement and complementing the existing methodology of assessment of innovative projects attractiveness in the context of their properties and a specific set of components. The research is scientifically applied since the problem solution involves the science-based development of a set of techniques, allowing the practical use of knowledge gained from large information arrays at the initialization stage. The purpose of the study is the formation of an integrated indicator of the project innovation, with a substantive justification of the calculation method, as a tool for the evaluation and selection of projects to be included in the portfolio of projects and programs. The theoretical and methodological basis of the research is the conceptual provisions and scientific developments of experts on project management issues, published in monographs, periodicals, materials of scientific and practical conferences on the topic of research. The tasks were solved using the general scientific and special methods, mathematical modelling methods based on the system approach. Results. A balanced system of parametric single indicators of innovation is presented – the risks, personnel, quality, innovation, resources, and performers, which allows getting a comprehensive idea of any project already in the initial stages. The choice of a risk tolerance as a key criterion of the “risks” element and the reference characteristics is substantiated, in relation to which it can be argued that the potential project holds promise. A tool for calculating the risk tolerance based on the use of matrices and vector analysis is proposed

  11. SOFTWARE IMPLEMENTATION OF FORMING OF COLOR-BASED CARDS FOR ASSESSMENT OF EARLY STAGES INNOVATION PROJECTS

    Directory of Open Access Journals (Sweden)

    Ekaterina I. Bragina

    2015-01-01

    Full Text Available The article deals with functional program that allows to generate a visualrepresentation of the shareholder tothe innovative project early stage ofdevelopment, formed a color-based cards.

  12. Application of Diffusion of Innovations Theory to the TIPs Evaluation Project Results and Beyond.

    Science.gov (United States)

    Hubbard, Susan M.; Huang, Judy Y.; Mulvey, Kevin P.

    2003-01-01

    Summarizes the results from four major studies under the Treatment Improvement Protocols (TIPs) evaluation project and uses the diffusion of innovations theory as a theoretical framework to understand substance abuse treatment providers awareness, attitudes, and practices regarding TIPs. (SLD)

  13. Supporting Innovation in Organic Agriculture: A European Perspective Using Experience from the SOLID Project

    DEFF Research Database (Denmark)

    Padel, Susanne; Vaarst, Mette; Zaralis, K.

    2015-01-01

    the alternative framework of innovation systems describing innovation as the outcome of stakeholder interaction and examples from the SOLID (Sustainable Organic Low-Input Dairying) project to discuss the role of farmers, researchers and knowledge exchange for innovation. We used a farmer-led participatory...... quality forage is vitally important, but farmers showed a lack of confidence in the reliability of forage production both in quantity and quality. We conclude that the systems framework improves the understanding of innovation processes in organic agriculture. Farmer-led research is an effective way...

  14. Application of IT-technologies in visualization of innovation project life-cycle stages during the study of the course "Management of innovation projects"

    Science.gov (United States)

    Kolychev, V. D.; Prokhorov, I. V.

    2017-01-01

    The article presents a methodology for the application of IT-technologies in teaching discipline "Management of innovation projects," which helps students to be more competitive and gather the useful skills for their future specialization in high-tech areas. IT-technologies are widely used nowadays in educational and training spheres especially in knowledge-intensive disciplines such as systems analysis, the theory of games, operations research, theory of risks, innovation management etc. For studying such courses it is necessary to combine both mathematical models and information technology approaches for the clear understanding of the investigated object. That is why this article comprises both the framework of research and the IT-tools for investigation in the educational process. Taking into consideration the importance of the IT-system implementation especially for the university we assume to suggest the methods of research in the area of innovation projects with the help of IT-support.

  15. Maker Movement Spreads Innovation One Project at a Time

    Science.gov (United States)

    Peppler, Kylie; Bender, Sophia

    2013-01-01

    The maker movement consists of a growing culture of hands-on making, creating, designing, and innovating. A hallmark of the maker movement is its do-it-yourself (or do-it-with-others) mindset that brings individuals together around a range of activities, both high- and low-tech, all involving some form of creation or repair. The movement's…

  16. EVALUATION OF THE IMPACT OF INNOVATIVE PROJECTS ON THE COMPETITIVENESS OF AGRICULTURAL HOLDINGS IN SLOVAK REPUBLIC

    Directory of Open Access Journals (Sweden)

    Ľubica RUMANOVSKÁ

    2013-01-01

    Full Text Available The scientific paper evaluates the impact of innovative projects on the competitiveness of agricultural holdings in SR. Evaluation of the impact of innovative projects on competitiveness of agricultural holdings was realized on the selected holdings in Nitra and Trnava region. For the evaluation was used RCR coefficient. With the use of RCR coefficient could be confirmed the scientific hypothesis - The innovative projects realized through Program for rural development SR 2007-2013 have positive impact on competitiveness of agricultural holdings. The possibilities for EU financial support for innovative projects in SR represent important source for introduction of new innovative technologies into production process and in future they can significantly contribute to the growth of competitiveness of agricultural subjects. Therefore, to increase competitiveness of agricultural holdings it is important to focus on modernization of machinery and buildings, use of natural sources for energy production, but also to increase the education and the flow of information between rural inhabitants, mainly farmers. In competitive area of EU agricultural sector it is necessary that agricultural holdings will innovate, not only to create independent flow of innovative products and knowledge, but also to increase its value on internal market. Agricultural holdings –receivers of financial support – have expressed the opinion that financial support realized through PRD SR 2007-2013 had definitely allowed them to implement new processes and products.

  17. How should grid operators govern smart grid innovation projects? An embedded case study approach

    International Nuclear Information System (INIS)

    Reuver, Mark de; Lei, Telli van der; Lukszo, Zofia

    2016-01-01

    Grid operators increasingly have to collaborate with other actors in order to realize smart grid innovations. For routine maintenance, grid operators typically acquire technologies in one-off transactions, but the innovative nature of smart grid projects may require more collaborate relationships. This paper studies how a transactional versus relational approach to governing smart grid innovation projects affects incentives for other actors to collaborate. We analyse 34 cases of smart grid innovation projects based on extensive archival data as well as interviews. We find that projects relying on relational governance are more likely to provide incentives for collaboration. Especially non-financial incentives such as reputational benefits and shared intellectual property rights are more likely to be found in projects relying on relational governance. Policy makers that wish to stimulate smart grid innovation projects should consider stimulating long-term relationships between grid operators and third parties, because such relationships are more likely to produce incentives for collaboration. - Highlights: • Smart grids require collaboration between grid operators and other actors. • We contrast transactional and relational governance of smart grid projects. • Long-term relations produce more incentives for smart grid collaboration. • Non-financial incentives are more important in long-term relations. • Policy makers should stimulate long-term relations to stimulate smart grids.

  18. Interaction enablers, drivers and barriers of collaborative innovation projects between small firms and academia

    DEFF Research Database (Denmark)

    Filip, Diane; Hansen, Bettina Dencker; Frølunde, Thea Thorsgaard

    2016-01-01

    Collaborative innovation projects are boundary-crossing activities in which knowledge bases from practice and academia are combined for innovations in small firms. In this study, small firms gain access to academic knowledge resources through a structured and formalized regional program. From...... a process-perspective, we explore five case studies and identify elements of collaborative innovation projects between small firms, academic researchers, and independent third parties in a Danish regional program. The elements are categorized into interaction enablers, collaboration characteristics, main...... drivers, and main barriers. Our three major findings relate to the phases of a structured program, elements of collaborative innovation projects, and the facilitation of interaction at two levels, i.e. meta-level and micro-level, by two types of brokers. The operator of the regional program facilitates...

  19. 7 ways to boost digital innovation and entrepreneurship in Europe. Key messages from the European innovation policies for the digital shift project

    OpenAIRE

    NEPELSKI DANIEL; BOGDANOWICZ MARC; BIAGI FEDERICO; DESRUELLE PAUL; DE PRATO GIUDITTA; GABISON GARRY; PIROLI GIUSEPPE; PESOLE ANNAROSA; THUMM NIKOLAUS; VAN ROY VINCENT

    2016-01-01

    This report attempts to summarise findings and conclusions of over 30 studies published within the EURIPIDIS project (European Innovation Policies for the Digital Shift). The objective of EURIPIDIS was to better understand how digital innovation and entrepreneurship work; to assess the EU's digital innovation and entrepreneurship performance; and to suggest how policy makers could make digital innovation and entrepreneurship in the EU work better. Because digital technologies facilitate the m...

  20. Two staged incentive contract focused on efficiency and innovation matching in critical chain project management

    Directory of Open Access Journals (Sweden)

    Min Zhang

    2014-09-01

    Full Text Available Purpose: The purpose of this paper is to define the relative optimal incentive contract to effectively encourage employees to improve work efficiency while actively implementing innovative behavior. Design/methodology/approach: This paper analyzes a two staged incentive contract coordinated with efficiency and innovation in Critical Chain Project Management using learning real options, based on principle-agent theory. The situational experiment is used to analyze the validity of the basic model. Finding: The two staged incentive scheme is more suitable for employees to create and implement learning real options, which will throw themselves into innovation process efficiently in Critical Chain Project Management. We prove that the combination of tolerance for early failure and reward for long-term success is effective in motivating innovation. Research limitations/implications: We do not include the individual characteristics of uncertain perception, which might affect the consistency of external validity. The basic model and the experiment design need to improve. Practical Implications: The project managers should pay closer attention to early innovation behavior and monitoring feedback of competition time in the implementation of Critical Chain Project Management. Originality/value: The central contribution of this paper is the theoretical and experimental analysis of incentive schemes for innovation in Critical Chain Project Management using the principal-agent theory, to encourage the completion of CCPM methods as well as imitative free-riding on the creative ideas of other members in the team.

  1. Employee-driven innovation in large project organisations

    DEFF Research Database (Denmark)

    Sørensen, Henrik; Wandahl, Søren; Christensen, Randi Muff

    2014-01-01

    In the built environment there is considered to be a great potential for innovation and continuous improvement based on the employees’ tacit as well as spoken knowledge. Through a case study the aim of this research was to challenge the theoretical approach to conduct employee-driven innovation...... (EDI). The case was a group of employees in a large governmental client organisation. The EDI framework was based on a theoretical approach to conduct EDI, derived from a previous literature study. The case study was conducted as an exploratory case study with outset in a gaming approach...... the participants’ discussions and perceptions of the applicability in the organisation. The findings were discussed in relation to the theoretical approach and findings from a comparable case study. It identified overall methods that had the higher robustness and applicability to incorporate in a practical EDI...

  2. Innovation

    DEFF Research Database (Denmark)

    Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

    2013-01-01

    This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

  3. Improving access to research outcomes for innovation in agriculture and forestry: the VALERIE project

    NARCIS (Netherlands)

    Bechini, Luca; Koenderink, N.J.J.P.; Berge, ten H.F.M.; Corre, W.J.; Evert, van F.K.; Ruijter, de F.J.; Willems, D.J.M.; Zandstra, Anneke; Top, J.L.

    2017-01-01

    Many excellent results are obtained in agricultural and forestry research projects, but their practical adoption is often limited. The aim of the European project VALERIE is to increase the transfer and application of innovations produced by research in agriculture and forestry, by facilitating

  4. Innovative Work Practices and Lessons Learned at the N Area Deactivation Project

    International Nuclear Information System (INIS)

    Day, R.S.

    1999-01-01

    This report identifies many of the lessons learned, innovations,and effective work practices that derived from activities supporting the N Area Deactivation Project at the U.S. Department of Energy's (DOE) Hanford Site. The work practices discussed in this report may be applicable and beneficial to similar projects throughout the DOE complex

  5. Demonstration projects for diffusion of clean technological innovation: a review

    NARCIS (Netherlands)

    Bossink, B.A.G.

    2014-01-01

    The demonstration project can be an effective organizational form to transform a clean technology prototype - for example, in the field of photovoltaics, carbon capture and storage, or wind power - into a marketable product. A question with regard to the clean technology demonstration project is how

  6. LVN to ADN: Innovative, Non-Traditional Learning Project.

    Science.gov (United States)

    Austin Community Coll., TX.

    This document contains the curriculum for the first nursing course in the Licensed Vocational Nurse Mobility Track Project. The project is designed to provide selected Licensed Vocational Nurses (LVNs) the opportunity to complete the nursing course requirements for an Associate of Applied Science Degree in Nursing (ADN) in three semesters of…

  7. Using the regularities of high and critical technologies developing in innovative project management

    Directory of Open Access Journals (Sweden)

    S. G. Selivanov

    2014-01-01

    Full Text Available Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and consequences, that is, in particular, “Science of Innovations”. The mentioned science laws explain wave dynamics of technical (technological systems development. In the course of innovation activities and/or innovation designing a modification of continuously acting technological system, usually, causes its developing and growing upwards by Sshaped curve. Changing a principle of action changes S-shaped curve development (Fig. 1. If such changes are within the certain “trace tube” we are entitled to state the steady system development.Analysis of changing target function of technological system within the “trace tube” of its steady development characterizes its growing wave dynamics (Fig. 1 using the S-shaped curves (sigmoid type relations. S-shaped innovative development relations of technological systems are, usually, explained by different mathematical models, each being in compliance with the certain process of science and technology. Singular innovative project management using the S-shaped curves can be explained by the following example (Fig.2.To use such management technique it is very important to know the mathematical models of S-curves for different types of innovation projects. That is why we consider given S-shaped relations in-detail for:- developing the high and critical technologies during R&D implementation using the cutting-edge CASSR (computer-aided systems of scientific research of high and critical technologies in innovation

  8. Dissemination of the Project's Findings: National Seminar (6th, Montreux, Switzerland, August 22-25, 1988). The CDCC's Project No. 8: "Innovation in Primary Education."

    Science.gov (United States)

    Sivirine, Jean-Michel

    This report summarizes the proceedings of a seminar held in Switzerland to disseminate the findings of the Council for Cultural Cooperation's (CDCC) project on innovation in primary education. Additional aims were to: (1) compare the CDCC's primary innovation project with five school development projects carried out in Switzerland; (2) test a…

  9. NASA/DoD Aerospace knowledge diffusion research project. III - The impact of a sponsor letter on mail survey response rates

    Science.gov (United States)

    Kennedy, John M.; Pinelli, Thomas E.

    1990-01-01

    The paper describes the impact of two interventions in the design of mail surveys. The interventions were devised to increase response rates and to clarify sample eligibility. To test their effectiveness, interventions occurred at different points in each of three surveys. One intervention was a letter from the research sponsor (NASA) supporting the research. The other intervention was the inclusion of a postcard that could be used by the respondent to indicate that the questionnaire was not appropriate for him/her. The sample was drawn from the membership of the American Institute for Aeronautics and Astronautics research society. The results indicate that the sponsor letter improved response rates under certain conditions described in the paper. The postcards assisted in identifying noneligible persons particularly when they accompanied a pre-survey letter. The implications for survey costs are discussed.

  10. A Proposal to Manage Lessons Learned in Projects: Web 2.0 Technologies to Promote Innovation

    Directory of Open Access Journals (Sweden)

    Marcirio Silveira Chaves

    2014-06-01

    Full Text Available The web 2.0 is transforming the project management in organizations by improving communication and collaboration. The new generation of web-based collaborative tools provides much better experience than the traditional software package allowing document sharing, integrated task tracking, enforcing team processes and agile planning. Despite of the indubitable benefits brought by web 2.0, the use of these technologies to promote knowledge management remains unexplored. For many project managers to obtain and integrate information from different tools of previous similar projects in global organizations remains a challenge. This theoretical paper presents a proposal that suggests an innovation in the knowledge management area applying web 2.0 technologies. The main goal is to provide an integrated vision of a set of technologies that could be used by organizations in order to promote better management of lessons learned. The proposal includes the lessons learned processes (e.g. capture, share and dissemination, the process-based (e.g. project review and after action review and documentation-based (e.g. micro article and learning histories methods. Results show how web 2.0 technologies can help project managers and team project to cope with the main lessons learned processes and methods to learn from experience. Moreover, recommendations are made for the effective use of web 2.0 components promoting innovation and supporting lessons learned management in projects.Keywords: Project management; Lessons learned processes; lessons learned methods; project learning; web 2.0 technologies; innovation.

  11. Professional Service innovations at Consulting Engineering - how change stay flat in project Organisations

    DEFF Research Database (Denmark)

    Koch, Christian; Bendixen, Mads

    understood through a practicebased theory approach using predominantly Actor Network Theory (Latour 2005). The paper focus on attempts to innovate service products, within projects and the remaining organisation. A seven-year cooperation with a consulting engineering, now employing the one of the authors has...... organisation, rather a too flat, project internal innovation policy and management would probably constrain innovation. Thus where Latour (2005) wants us to stay flat, the problematic for the consultancy is maybe rather how to avoid being too flat....... three dimensions: the development of the firm itself, the projects and a spatial/community dimension. This enables an understanding of the multiple, often contrasting, organizing dynamics in the organization as well as diverse interests and groups found within this type of service production...

  12. Towards a multidisciplinary understanding of product innovation: the Synopsis network project

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles

    2002-01-01

    The product development research area has evolved from the area of engineering design, based upon the recognition that important aspects such as need, market, business, innovation of the company, technology management, etc. fuse together to form a field of competencies, containing its own......, psychology, anthropology, social science and operations management. The group of researchers is formally organised as a research network project, supported and part-funded by the Centre for Industrial Production at Aalborg University. The project, called "Synopsis", has a number of aims and foci...... a set of "images of innovation" which describe the subject from each our viewpoints. The ultimate goals of the network project are to produce: 1. A framework/reference system describing companies´ innovation activities, based upon national and international research findings 2. A vocabulary with which...

  13. Co-Learning and Knowledge Diffusion in Public Procurement of Sustainable Innovation Projects

    DEFF Research Database (Denmark)

    Rolfstam, Max

    of innovation, not so much external pressure. By drawing on the latter perspective, this paper intends to contribute to the diffusion / implementation discussion by reporting from the Cleantech TIPP project. This is an undergoing Interreg project which gathers primarily municipalities, but also universities...... some conceptual and methodological challenges as well as providing a preliminary analysis to what extent the project set-up is useful as a means to diffuse public procurement practices rendering sustainable innovation.......-moon concluded recently that “innovation and procurement are viable, tested and proven policy options to achieve sustainable growth in the developed world and, increasingly, in the developing world as well” (UNOPS, 2014. p. 1). The literature treats public procurement for example, as a means to develop green...

  14. Survival of the project: a case study of ICT innovation in health care.

    Science.gov (United States)

    Andreassen, Hege K; Kjekshus, Lars Erik; Tjora, Aksel

    2015-05-01

    From twenty years of information and communication technology (ICT) projects in the health sector, we have learned one thing: most projects remain projects. The problem of pilotism in e-health and telemedicine is a growing concern, both in medical literature and among policy makers, who now ask for large-scale implementation of ICT in routine health service delivery. In this article, we turn the question of failing projects upside down. Instead of investigating the obstacles to implementing ICT and realising permanent changes in health care routines, we ask what makes the temporary ICT project survive, despite an apparent lack of success. Our empirical material is based on Norwegian telemedicine. Through a case study, we take an in-depth look into the history of one particular telemedical initiative and highlight how ICT projects matter on a managerial level. Our analysis reveals how management tasks were delegated to the ICT project, which thus contributed to four processes of organisational control: allocating resources, generating and managing enthusiasm, system correction and aligning local practice and national policies. We argue that the innovation project in itself can be considered an innovation that has become normalised in health care, not in clinical, but in management work. In everyday management, the ICT project appears to be a convenient tool suited to ease the tensions between state regulatory practices and claims of professional autonomy that arise in the wake of new public management reforms. Separating project management and funding from routine practice handles the conceptualised heterogeneity between innovation and routine within contemporary health care delivery. Whilst this separation eases the execution of both normal routines and innovative projects, it also delays expected diffusion of technology. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. USING OF THE PROJECT-ORIENTED APPROACH IN THE INNOVATIVE ACTIVITY MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Варвара Михайлівна ПІТЕРСЬКА

    2016-02-01

    Full Text Available The article describes the current state of science in Ukraine, indicated the main directions of research funding. The methodological approach of working out of the project-oriented strategy of innovative development of scientific activity, including the implementation of international trends and support of research is proposed. Using of a project-oriented approach of research activities due to the need of reducing of the research cycle and strengthen expenditure control capabilities due to restrictions of funding research projects from the state. It should be noted that the structuring of research, given the project approach, allows engaging of the implementation of the research project professionals with good knowledge and skills and create a team activity focused on quality results. Innovations aren‘t still properly means the improvement of competitiveness in Ukraine. Thus, the problem of transition to an innovative development model retains its relevance, that significantly enhanced in the light of current external and internal trends. Using of the project-oriented innovation management due to the need to shorten the cycle of research and to strengthen the control over the expenditure of funds in connection with the limited funding of scientific research by the state.

  16. Etruscanning 3D: an innovative project about Etruscans

    NARCIS (Netherlands)

    Pietroni, E.; Pletinckx, D.; Hupperetz, W.; Rufa, C.; Earl, G.; Sly, T.; Chrysanthi, A.; Murrieta-Flores, P.; Papadopoulos, C.; Romanowska, I.; Wheatley, D.

    2013-01-01

    Museums have a lot to gain in terms of communicative impact with new narrative scenarios that are developing through advances in technology.We will discuss the 3D reconstruction of the Regolini Galassi Tomb, a Virtual Museum developed in the Etruscanning 3D European project framework, which engages

  17. 45 CFR 2552.25 - What are a sponsor's administrative responsibilities?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false What are a sponsor's administrative... a Sponsor § 2552.25 What are a sponsor's administrative responsibilities? A sponsor shall: (a... delegated to project staff for NSSC program(s) within its control. A full-time project director shall not...

  18. 45 CFR 2553.25 - What are a sponsor's administrative responsibilities?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false What are a sponsor's administrative... Responsibilities of a Sponsor § 2553.25 What are a sponsor's administrative responsibilities? A sponsor shall: (a... delegated to project staff for NSSC program(s) within its control. A full-time project director shall not...

  19. METHODOLOGICAL BASIS OF MANAGEMENT OF THE INITIALIZATION OF INNOVATIVE PROJECTS AND PROGRAMS OF AGRICULTURAL ENTERPRISES DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Ігор Миколайович ФЛИС

    2015-05-01

    Full Text Available The main factors, influence on the initialization process of innovative projects and programs (IPP of creating production-processing complexes and cooperatives (PPC in some rural areas have been analyzed in the article. Based on the analysis of the identified problems during the initialization process of innovative projects and programs for the agro-industrial enterprises development in terms of significant risks of farming and processing industry, have been offered methodological approaches to the management of the factors of initializing IPP of PPC implementation in order to ensure sustainable development of rural communities and their surrounding areas.

  20. Exploring an innovation project as source of change in organization design

    DEFF Research Database (Denmark)

    Brix, Jacob; Peters, Lois S.

    2015-01-01

    This study builds new empirically based theory on how the processing of an innovation project with a high degree of uncertainty induces change in key components in organization design. By using an embedded case study as our research strategy and organisation design theory as our analytical lens, we...... construct ten propositions that determine how the organization design of our case organization was influenced because of their innovation project. These changes represent: a) improved competencies for exploration activities, b) improved competencies for exploiting new knowledge, and c) increased readiness...

  1. Large Scale Construction Project Innovative Management Through 5-S

    Directory of Open Access Journals (Sweden)

    Hashim Hj. Abdul Ghani Mohd.

    2014-11-01

    Full Text Available It has been well-recognised that Japanese construction firms are good in safety, hygiene, quality, productivity and image. Over the last century, the Japanese have formalised the technique and name it as '5S' Practice. Through his research in Japan in 1988, the author has re-define the name as '5-S' and developed the world's first 5-S Audit Checklist. Since 1993, he used an innovative 5-S Checklist developed at SIRIM for training and consultancy in no less than 20 countries with over 100,000 persons from around 8,000 organisations world-wide. The objective of this paper is to explain the intricacy of the 5-S so that it can be understood easily and adopted readily by those who may find the tool useful. Some experience will also be shared in this article. It is hoped that this article can arouse the interest of the construction industry in Malaysia to take up this important and effective tool for quality improvement.

  2. Crowdfunding: an innovative way to fund your project.

    Science.gov (United States)

    Walker, Dawn-Marie

    2017-06-22

    Background Getting research funded is extremely difficult, with research councils rejecting more than 70% of grant applications ( Else 2014 ). It is even more difficult if you are a junior researcher who doesn't have a track record of being awarded grant money or leading a research project. Crowdfunding may offer a solution. It is a method of raising funds from members of the public online and can offer an alternative to the more formal methods of research funding. Aim To outline how this model works and provide tips on designing a campaign. Discussion The authors provide an overview of the literature regarding this model, as well as a set of resources for future reference when designing a campaign. Conclusion Crowdfunding can provide small amounts of money for your first project. Implications for practice It is expected that clinicians practice evidence based medicine, and research in health environments is commonplace. Crowdfunding can offer you support in becoming more engaged in research.

  3. RESEARCH OF THE RELATIONSHIP OF TERMS PROJECT MANAGEMENT AND INNOVATION, AS A BASIS OF EFFECTIVE MECHANISM OF INNOVATION DEVELOPMENT OF RUSSIA

    Directory of Open Access Journals (Sweden)

    Теона Давидовна Колесник

    2013-04-01

    Full Text Available Today Project management turned into a separate discipline with its standards, techniques and body of knowledge. There are more than 40 methodologies, the most recognition among them is standard PMBoK (Project Management Body of Knowledge. However, officially there is no single definition nor the term "project" nor the term "project management". The concept of "innovation" quite fully indicated, so innovation often is limited by time and budget, associated with novelty and irregularity, it is inherent uncertainties, risks, and weak of structure. In turn, the Project management uses technologies of managing resources to overcome the limitations of the budget, as well as a wide range of predictors and risk management, formalized and integrated management of individual project processes. All this makes the project management of highly effective technique to manage innovation.DOI: http://dx.doi.org/10.12731/2218-7405-2013-3-14

  4. RESEARCH OF THE RELATIONSHIP OF TERMS PROJECT MANAGEMENT AND INNOVATION AS A BASIS OF EFFECTIVE MECHANISM OF INNOVATION DEVELOPMENT OF RUSSIA

    Directory of Open Access Journals (Sweden)

    Kolesnik Teona Davidovna

    2013-03-01

    Full Text Available Today Project management turned into a separate discipline with its standards, techniques and body of knowledge. There are more than 40 methodologies, the most recognition among them is standard PMBoK (Project Management Body of Knowledge. However, officially there is no single definition nor the term "project" nor the term "project management". The concept of "innovation" quite fully indicated, so innovation often is limited by time and budget, associated with novelty and irregularity, it is inherent uncertainties, risks, and weak of structure. In turn, the Project management uses technologies of managing resources to overcome the limitations of the budget, as well as a wide range of predictors and risk management, formalized and integrated management of individual project processes. All this makes the project management of highly effective technique to manage innovation.

  5. The Advanced Exploration Systems Water Recovery Project: Innovation on 2 Fronts

    Science.gov (United States)

    Sarguisingh, Miriam M.; Neumeyer, Derek; Shull, Sarah

    2012-01-01

    As NASA looks forward to sending humans farther away from Earth, we will have to develop a transportation architecture that is highly reliable and that can sustain life for long durations without the benefit of Earth s proximity for continuous resupply or even operational guidance. NASA has consistently been challenged with performing great feats of innovation, but particularly in this time of economic stress, we are challenged to go farther with less. The Advanced Exploration Systems (AES) projects were implemented to address both of these needs by not only developing innovative technologies, but by incorporating innovative management styles and processes that foster the needed technical innovation given a small amount of resources. This presentation explains how the AES Water Recovery Project is exhibiting innovation on both fronts; technical and process. The AES Water Recovery Project (WRP) is actively engineering innovative technologies in order to maximize the efficiency of water recovery. The development of reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support (ECLS) is critical to enable long-duration human missions outside of low-Earth orbit. Recycling of life support consumables is necessary to reduce resupply mass and provide for vehicle autonomy. To address this, the WRP is working on a rotary distiller that has shown enhanced performance over the state-of-the-art (SOA). Additionally, the WRP is looking at innovative ways to address issues present in the state-of-the-art (SOA) systems pertaining to toxicity and calcium scale buildup. As an AES project, the WRP has a more streamlined Skunk Works like approach to technology development intended to reduce overhead but achieve a more refined end product. The project has incorporated key partnerships between NASA centers as well as between NASA and industry. A minimal project management style has been implemented such that risks are managed and

  6. Super simple experiments with forces fun and innovative science projects

    CERN Document Server

    Polinsky, Paige V

    2016-01-01

    Super Simple Experiments with Forcesgives young readers the tools they need to start experimenting.Budding scientists will learn to lift rice with friction, move a mini boat with surface tension, and more! Each project has easy‑to‑read directions paired with step‑by‑step photographs, while colorful graphics describe the super science at work.Aligned to Common Core Standards and correlated to state standards. Applied to STEM Concepts of Learning Principles. Super Sandcastle is an imprint of Abdo Publishing, a division of ABDO.

  7. Super simple experiments with mass fun and innovative science projects

    CERN Document Server

    Polinsky, Paige V

    2016-01-01

    Super Simple Experiments with Mass gives young readers the tools they need to start experimenting. Budding scientists will learn to make and measure the mass of putty, separate liquids by density, and more! Each project has easy‑to‑read directions paired with step‑by‑step photographs, while colorful graphics describe the super science at work. Aligned to Common Core Standards and correlated to state standards. Applied to STEM Concepts of Learning Principles. Super Sandcastle is an imprint of Abdo Publishing, a division of ABDO.

  8. Super simple experiments with electricity fun and innovative science projects

    CERN Document Server

    Polinsky, Paige V

    2016-01-01

    Super Simple Experiments with Electricitygives young readers the tools they need to start experimenting.Budding scientists will learn to create lightning using a pencil, make a penny‑powered battery, and more! Each project has easy‑to‑read directions paired with step‑by‑step photographs, while colorful graphics describe the super science at work.Aligned to Common Core Standards and correlated to state standards. Applied to STEM Concepts of Learning Principles. Super Sandcastle is an imprint of Abdo Publishing, a division of ABDO.

  9. ANALYSIS OF A PROJECT OF TECHNOLOGICAL INNOVATION AND THE USE OF CANVAS APPROACH

    Directory of Open Access Journals (Sweden)

    Marcos de Oliveira Moraes

    2017-06-01

    Full Text Available The dynamism of the market of recent times and the increasing demand of the market in the search for new processes, products and services increasingly aligned with the organizational needs, the innovation process has become extremely relevant and investing in new knowledge has become essential for organization to remain in the market. Based on this, the Canvas approach seeks to develop models with broad vision that provides the attendance of the needs of the organizations, accelerating this innovation process in a participatory way. The present article had the objective of mapping one of the innovations in the company, as well as its presentation through the approach of 2 Canvas models. The methodology of a single case study. The results indicate that the Canvas approach can improve the planning of innovation processes, where those directly involved in the project have a broad vision in the search for the solution of the problems faced and in obtaining the creation of competitive advantages.

  10. How to establish knowledge sharing from the very first moment in critical and risky Business Model Innovation project

    DEFF Research Database (Denmark)

    Lindgren, Peter; Aagaard, Annabeth; Ulldall, Lene

    Joint action and knowledge sharing are fundamental aspects of business model innovation for businesses to meet the complex Business Model Innovation challenges; for example, think about 12 business jointly innovating on the establishment of a new concept of a balanced energy plant project where...

  11. Innovations in projecting emissions for air quality modeling ...

    Science.gov (United States)

    Air quality modeling is used in setting air quality standards and in evaluating their costs and benefits. Historically, modeling applications have projected emissions and the resulting air quality only 5 to 10 years into the future. Recognition that the choice of air quality management strategy has climate change implications is encouraging longer modeling time horizons. However, for multi-decadal time horizons, many questions about future conditions arise. For example, will current population, economic, and land use trends continue, or will we see shifts that may alter the spatial and temporal pattern of emissions? Similarly, will technologies such as building-integrated solar photovoltaics, battery storage, electric vehicles, and CO2 capture emerge as disruptive technologies - shifting how we produce and use energy - or will these technologies achieve only niche markets and have little impact? These are some of the questions that are being evaluated by researchers within the U.S. EPA’s Office of Research and Development. In this presentation, Dr. Loughlin will describe a range of analytical approaches that are being explored. These include: (i) the development of alternative scenarios of the future that can be used to evaluate candidate management strategies over wide-ranging conditions, (ii) the application of energy system models to project emissions decades into the future and to assess the environmental implications of new technologies, (iii) and methodo

  12. AIDSCAP initiative. Innovation in NGO capacity building: Tanzania AIDS project.

    Science.gov (United States)

    Dadian, M J

    1998-01-01

    Tanzania has since the mid-1980s experienced some of the highest rates of HIV infection in the world, with data now showing the mean levels of HIV seroprevalence nationwide to be greater than 13%, and even higher than 30% in some districts. By 2000, as many as 2.4 million Tanzanians will be infected with HIV and more than 850,000 Tanzanian children will be orphaned by the epidemic. The Tanzania AIDS Project (TAP), funded by the US Agency for International Development (USAID), was implemented through the AIDS Control and Prevention (AIDSCAP) Project by Family Health International (FHI) during 1993-97. TAP will receive support throughout 1998 through a cooperative agreement between USAID and FHI. Nongovernmental organization (NGO) representatives meet on a regular basis in Dar es Salaam and in 8 other regions of the country to plan and coordinate the major aspects of TAP's HIV/AIDS prevention activities in each area. The author describes the evolution of the idea to bring NGOs together into geographic clusters, the diversity of talents enjoyed from using the cluster concept, building institutional capacity, the challenges facing TAP's 9 clusters, and working with traditional communities.

  13. Key performance indicators for project success on innovative building technology projects

    CSIR Research Space (South Africa)

    Mphahlele, Cathy

    2015-12-01

    Full Text Available The South African government, through the Presidential Infrastructure Coordinating Commission has resolved to deliver social infrastructure such as schools, early childhood centers, clinics and student accommodation using Innovative Building...

  14. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 3: The impact of a sponsor letter on mail survey response rates

    Science.gov (United States)

    Kennedy, John M.; Pinelli, Thomas E.

    1990-01-01

    We describe the impact of two interventions in the design of mail surveys. The interventions were devised to increase response rates and to clarify sample eligibility. To test their effectiveness, the interventions occurred at different points in each of three surveys. One intervention was a letter from the research sponsor (NASA) supporting the research. The other intervention was the inclusion of a postcard that could be used by the respondent to indicate that the questionnaire was not appropriate for him/her. The sample was drawn from the membership of a professional aerospace research society, the American Institute for Aeronautics and Astronautics (AIAA). Scientists and engineers are difficult to survey for two reasons. First, there are significant problems with the definition of scientists and engineers. Second, typically there are low response rates in surveys of this group. These two problems were found in the NASA surveys. The results indicate that the sponsor letter improved response rates under certain conditions described here. The postcards assisted in identifying non-eligible persons, particularly when the postcards accompanied a pre-survey letter. The implications for survey costs are discussed.

  15. Innovation

    OpenAIRE

    2009-01-01

    Il s’agit du second ouvrage paru dans le cadre du projet « Innovation und Recht », financé par la Fondation Volkswagen. D’approche interdisciplinaire, celui-ci a pour ambition de dé­terminer l’impact du droit existant sur l’innovation en vue de le faire évoluer. Au regard du droit de la concurrence et de la régulation sectorielle actuels, les auteurs se consacrent aux possibilités offertes par une orientation accrue vers l’innovation, notamment dans le secteur prometteur des télécommunication...

  16. Employee-driven innovation in large project organisations

    DEFF Research Database (Denmark)

    Sørensen, Henrik; Wandahl, Søren; Christensen, Randi Muff

    2014-01-01

    (EDI). The case was a group of employees in a large governmental client organisation. The EDI framework was based on a theoretical approach to conduct EDI, derived from a previous literature study. The case study was conducted as an exploratory case study with outset in a gaming approach...... the participants’ discussions and perceptions of the applicability in the organisation. The findings were discussed in relation to the theoretical approach and findings from a comparable case study. It identified overall methods that had the higher robustness and applicability to incorporate in a practical EDI...... framework. The findings further emphasise that when approaching EDI in large project organisations in the built environment, the theoretical approach is often more sophisticated than the organisational needs to be successful....

  17. Pre-School Foreign Language Teaching and Learning--A Network Innovation Project in Slovenia

    Science.gov (United States)

    Brumen, Mihaela; Berro, Fanika Fras; Cagran, Branka

    2017-01-01

    The paper describes some findings about teaching foreign languages (FL) in a pre-school setting obtained from the Network Innovation Project (NIP). The aims of the NIP were to research and practise the most effective teaching approaches and organizational models in teaching and learning of FL in pre-schools. The objectives were to determine how…

  18. The System of Management of Innovation Projects at a Higher Education

    Science.gov (United States)

    Kalimullin, Aydar M.; Youngblood, Valery ?.; Khodyreva, Elana A.

    2016-01-01

    The urgency of the issue discussed in this article is caused by the need for development and assessment of new models and mechanisms of management of higher education institutions, which are connected with the development of the system of management of innovation projects and contribute to the development of educational institutions. The aim of…

  19. Inclusive innovation: a research project on the inclusion of social responsibility

    NARCIS (Netherlands)

    Nijhof, A.H.J.; Fisscher, O.A.M.; de Bakker, F.G.A.

    2001-01-01

    The research project 'Inclusive Innovation' aims at stimulating dialogue about inclusion of social responsibility based on universal human rights in the conduct of business. This dialogue concerns both the communication within the organisation and between the organisation and interested parties in

  20. Collaborative value creation and learning in innovation projects for a circular city

    NARCIS (Netherlands)

    Oskam, Inge; Bossink, Bart; de Man, Ard-Pieter

    2017-01-01

    Over the last decade, the concept of a circular economy, an industrial economy that is restorative or regenerative by intention and design, has gained increased attention of policy makers, industry and academics. Recently the number of innovation projects, set up by local governments, communities,

  1. Small business innovation research. Abstracts of completed 1987 phase 1 projects

    Science.gov (United States)

    1989-01-01

    Non-proprietary summaries of Phase 1 Small Business Innovation Research (SBIR) projects supported by NASA in the 1987 program year are given. Work in the areas of aeronautical propulsion, aerodynamics, acoustics, aircraft systems, materials and structures, teleoperators and robotics, computer sciences, information systems, spacecraft systems, spacecraft power supplies, spacecraft propulsion, bioastronautics, satellite communication, and space processing are covered.

  2. Innovative application of a new PBL model to interdisciplinary and intercultural projects

    DEFF Research Database (Denmark)

    Nielsen, Jens Frederik Dalsgaard; Du, Xiangyun; Kolmos, Anette

    2010-01-01

    In the knowledge society, learning is not only knowledge acquisition or participation in established social practice. It is also a process of creating new knowledge collaboratively when addressing complex problems which involve interdisciplinary knowledge and innovative thinking. In our research ...... the learning process in the ICT-based, intercultural and interdisciplinary PBL environment of an international student satellite project....

  3. Innovation in project-based companies - A case study in different approaches to organisational change

    DEFF Research Database (Denmark)

    Grex, Sara

    2004-01-01

    This paper asks how project-based organizations can be developed in order to establish and sustain innovation. The question is being explored by examining and comparing two approaches to organizational change. One approach emphasizes planning, regulation and control and creation of changes through...

  4. Innovation in health service management: Adoption of project management offices to support major health care transformation.

    Science.gov (United States)

    Lavoie-Tremblay, Mélanie; Aubry, Monique; Cyr, Guylaine; Richer, Marie-Claire; Fortin-Verreault, Jean-François; Fortin, Claude; Marchionni, Caroline

    2017-11-01

    To explore the characteristics that influence project management offices acceptance and adoption in healthcare sector. The creation of project management offices has been suggested as a promising avenue to promote successful organisational change and facilitate evidence-based practice. However, little is known about the characteristics that promote their initial adoption and acceptance in health care sector. This knowledge is important in the context where many organisations are considering implementing project management offices with nurse managers as leaders. A descriptive multiple case study design was used. The unit of analysis was the project management offices. The study was conducted in three university-affiliated teaching hospitals in 2013-14 (Canada). Individual interviews (n = 34) were conducted with senior managers. Results reveal that project management offices dedicated to project and change management constitute an innovation and an added value that addresses tangible needs in the field. Project management offices are an innovation highly compatible with health care managers and their approach has parallels to the process of clinical problem solving and reasoning well-known to adopters. This knowledge is important in a context where many nurses hold various roles in project management offices, such as Director, project manager, clinical expert and knowledge broker. © 2017 John Wiley & Sons Ltd.

  5. Innovation

    DEFF Research Database (Denmark)

    Helms, Niels Henrik

    2012-01-01

    Kravet om innovation og kreativitet er på flere måder en stor og en ny udfordring for voksenuddannelserne. Det udfordrer det didaktiske dilemma, det at vi skal gøres til kompetente og frie mennesker gennem pædagogiske handlinger, som netop pålægger os en ufrihed. – Men hvor denne ufrihed...... innovative, netop er det, vi endnu ikke kender...

  6. The relationship between servant leadership and employee empowerment, commitment, trust and innovative behaviour: A project management perspective

    OpenAIRE

    Camilla L. Krog; Krishna Govender

    2015-01-01

    Orientation: Understanding the relationship between a project sponsor’s servant leadership traits and employee commitment, trust and innovative behaviour.Research purpose: This study aimed to understand the relationship, if any, between a project sponsor’s servant leadership traits of altruistic calling, emotional healing, wisdom, persuasive mapping and organisational stewardship and a project team’s empowerment, commitment, trust and innovative behaviour.Motivation of the study: Most project...

  7. Determining the directions of increasing the innovative potential of the region by developing innovative technologies and competences when preparing and implementing large investment projects

    Directory of Open Access Journals (Sweden)

    Timur V. Kramin

    2015-12-01

    Full Text Available Objective to determine the directions of increasing the innovative potential of a region through the development of innovative technologies and competences in the process of preparation and implementation of large investment projects in the Republic of Tatarstan. Methods methodology of project management institutional approach. Results it is proved that the main largescale directions of innovative potential development in the Republic of Tatarstan as a result of preparation and implementing of Universiade 2013 in Kazan are knowledge management information technologies risk management. It is shown that in the framework of the considered innovative areas a complete system was formed of competences of employees and managers in the fields of education trade hospitality and service. Scientific novelty the key directions were defined of increasing the innovative potential of a region through the development of innovative technologies and competences in the process of preparation and implementation of large investment projects by the example of the World Summer Student Games in Kazan in 2013. Practical significance on the basis of specific examples the authors illustrate the practiceoriented mechanism of innovative potential development of a region as a result of implementation of large investment projects. nbsp

  8. The deployment of projects of hydrogen-related innovative technologies in Japan and some topics in the project

    International Nuclear Information System (INIS)

    Sakata, K.; Mizutani, E.; Fukuda, K.

    2004-01-01

    The deployment of innovative technologies, which have the potentiality to make breakthroughs in the future but have been kept remained at early stages of development because of their uncertain technological values, is important in the course of introduction and dissemination of hydrogen energy into our society. In Japan, in the consecutive projects of 'World Energy Network' (WE-NET) and 'Development of Safe Utilization Technology and an Infrastructure for Hydrogen Use', both supported by New Energy and Industrial Technology Development Organization (NEDO), significant results have been achieved in the project of 'Research on Innovative Technologies'. The framework and characteristics of this project are outlined with several research topics. In the exploratory research on the alternative catalytic materials to Platinum group metals for fuel cells and hydrogen production, a series of Tantalum oxynitrides were found potentially applicable as new electrodes catalysts the development of magnetic refrigeration of hydrogen is under way with the finding of materials with feasible properties; in search of innovative hydrogen storage systems, a new process of decalin dehydrogenation / naphthalene hydrogenation based on superheated liquid-film-type catalysis was developed. (author)

  9. Toward a Framework for Resource Efficiency Evaluation in Industry: Recommendations for Research and Innovation Projects

    Directory of Open Access Journals (Sweden)

    Sophie Sfez

    2017-01-01

    Full Text Available The world is facing a tremendous resource supply challenge. One strategy of regions and nations to address this issue is to encourage research and innovation through funding programs. Most of the time, these programs require that research and innovation projects quantify potential increases in resource efficiency achieved by the projects. However, no consensus exists on how to calculate resource efficiency; therefore, a wide range of approaches is followed. As a result, resource efficiency results are not comparable between projects, and because no rules or guidelines exist to help project developers, the approach followed is not always appropriate. This paper aims to discuss the existing approaches and methods used to evaluate resource efficiency. In this context, resource efficiency is defined as the ratio between the benefits obtained from resources and the impact or amount of resources used. The most challenging step is the determination of this ratio’s denominator because a wide range of methods to quantify resource consumption exist and are being used. They can be classified as gate-to-gate or life cycle based methods and can be subdivided into accounting methods and impact assessment methods. Each method considers different aspects of resources; thus, no single method aims to answer the same research questions. Therefore, project developers must make a well informed choice about which method to use. This paper provides recommendations to support this choice, as well as the overall evaluation and the valorization of the resource efficiency ratio in the framework of research and innovation programs.

  10. International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). 2008 progress report

    International Nuclear Information System (INIS)

    2009-02-01

    The purpose of the work is to review the progress of the IAEA international project for innovative reactors and fuel cycle technologies (INPRO). The publication reports about the recognition of INPRO and on general Information on INPRO, its strengths, memberships, collaboration with other international initiatives, the INPRO organization and management and the history of INPRO. The section on the progress of INPRO in 2008 contains task 1: INPRO Methodology, task 2: Assessment Studies, task 3: Nuclear Energy Visions for the 21st Century, task 4: Infrastructure and Institutional Innovation, task 5: Common User Considerations and task 6: Collaborative Projects. Conclusions and New Trends are followed by a bibliography. Annex I deals with the INPRO project management in 2008 and Annex II provides a selection of photographs from 2008. Finally a list of acronyms is provided

  11. Innovative application of a new PBL model to interdisciplinary and intercultural projects

    DEFF Research Database (Denmark)

    Nielsen, Jens Frederik Dalsgaard; Du, Xiangyun; Kolmos, Anette

    2010-01-01

    In the knowledge society, learning is not only knowledge acquisition or participation in established social practice. It is also a process of creating new knowledge collaboratively when addressing complex problems which involve interdisciplinary knowledge and innovative thinking. In our research ...... the learning process in the ICT-based, intercultural and interdisciplinary PBL environment of an international student satellite project.......In the knowledge society, learning is not only knowledge acquisition or participation in established social practice. It is also a process of creating new knowledge collaboratively when addressing complex problems which involve interdisciplinary knowledge and innovative thinking. In our research we...

  12. Conceptualizations on Innovation Competency in a Problem- and Project-Based Learning Curriculum

    DEFF Research Database (Denmark)

    Zhang, Fenzhi; Kolmos, Anette; de Graaff, Erik

    2013-01-01

    identified by analyzing the narratives of interviewees and coding the transcriptions into pre-prepared categories, based on the theoretical framework inspired by activity theory. The analysis of empirical data indicates a collaborative nature of innovation competency in the PBL curriculum; emphasizes...... the empowerment of individuals during teamwork; displays the interaction between individuals, teams and the social system. Furthermore, it describes innovation competency as a wide range of human abilities and processes, such as personal ability (in finding real-life problems and formulating research questions......), interpersonal ability (by being open and responsive to diverse perspectives and intentionally constructing collaborative relationships), and implementing ability (by effectively implementing their ideas in useful projects)....

  13. Facilities management innovation in public-private collaborations: Danish ESCO projects

    DEFF Research Database (Denmark)

    Nardelli, Giulia; Jensen, Jesper Ole; Nielsen, Susanne Balslev

    2015-01-01

    The purpose of the article is to investigate how Facilities Management (FM) units navigate Energy Service Company (ESCO) collaborations, here defined as examples of public collaborative innovation within the context of FM. The driving motivation is to inform and inspire internal FM units of local...... institutions on how to navigate and manage collaboration of different, intra- and inter-organisational actors throughout ESCO projects.......The purpose of the article is to investigate how Facilities Management (FM) units navigate Energy Service Company (ESCO) collaborations, here defined as examples of public collaborative innovation within the context of FM. The driving motivation is to inform and inspire internal FM units of local...

  14. NASA Human Health and Performance Center: Open innovation successes and collaborative projects

    Science.gov (United States)

    Richard, Elizabeth E.; Davis, Jeffrey R.

    2014-11-01

    In May 2007, what was then the Space Life Sciences Directorate published the 2007 Space Life Sciences Strategy for Human Space Exploration, setting the course for development and implementation of new business models and significant advances in external collaboration over the next five years. The strategy was updated on the basis of these accomplishments and reissued as the NASA Human Health and Performance Strategy in 2012, and continues to drive new approaches to innovation for the directorate. This short paper describes the successful execution of the strategy, driving organizational change through open innovation efforts and collaborative projects, including efforts of the NASA Human Health and Performance Center (NHHPC).

  15. Innovation

    OpenAIRE

    2008-01-01

    Voilà deux approches complémentaires de la problématique de l’innovation et des pôles de compétitivité. L’innovation, facteur-clef de compétitivité, y est considérée sous deux angles. D’un côté, celui de la politique industrielle et de sa mise en œuvre à l’échelon territorial via la création de pôles de compétitivité et des partenariats institutionnels que cela implique. D’un autre côté, l’angle des systèmes nationaux d’innovation et de leur comparaison internationale ; ces systèmes sont cons...

  16. 45 CFR 2552.23 - What are a sponsor's program responsibilities?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false What are a sponsor's program responsibilities... Sponsor § 2552.23 What are a sponsor's program responsibilities? A sponsor shall: (a) Focus Foster... project's service area. (b) Assess in collaboration with other community organizations or utilize existing...

  17. 45 CFR 2551.23 - What are a sponsor's program responsibilities?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false What are a sponsor's program responsibilities... Sponsor § 2551.23 What are a sponsor's program responsibilities? A sponsor shall: (a) Focus Senior... within the project's service area. (b) Assess in collaboration with other community organizations or...

  18. 45 CFR 2551.25 - What are a sponsor's administrative responsibilities?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false What are a sponsor's administrative... Sponsor § 2551.25 What are a sponsor's administrative responsibilities? A sponsor shall: (a) Assume full... program(s) within its control. A full-time project director shall not serve concurrently in another...

  19. 45 CFR 2553.23 - What are a sponsor's program responsibilities?

    Science.gov (United States)

    2010-10-01

    ... Responsibilities of a Sponsor § 2553.23 What are a sponsor's program responsibilities? A sponsor shall: (a) Focus RSVP resources to have a positive impact on critical human and social needs within the project service... 45 Public Welfare 4 2010-10-01 2010-10-01 false What are a sponsor's program responsibilities...

  20. NASA Human Health and Performance Center: Open Innovation Successes and Collaborative Projects

    Science.gov (United States)

    Davis, Jeffrey R.; Richard, Elizabeth E.

    2014-01-01

    In May 2007, what was then the Space Life Sciences Directorate published the 2007 Space Life Sciences Strategy for Human Space Exploration, which resulted in the development and implementation of new business models and significant advances in external collaboration over the next five years. The strategy was updated on the basis of these accomplishments and reissued as the NASA Human Health and Performance Strategy in 2012, and continues to drive new approaches to innovation for the directorate. This short paper describes the open innovation successes and collaborative projects developed over this timeframe, including the efforts of the NASA Human Health and Performance Center (NHHPC), which was established to advance human health and performance innovations for spaceflight and societal benefit via collaboration in new markets.

  1. Innovation

    DEFF Research Database (Denmark)

    Torfing, Jacob; Ricard, Lykke Margot

    2017-01-01

    Innovation i krydsfeltet mellem forskellige styringsparadigmer i offentlige organisationer. New Public Governance gør det muligt at skabe offentlig værdi på nye måder. Men NPG er ingen trylledrik, der fra den ene dag til den anden skaber balance mellem borgernes store forventninger og en trængt...

  2. Innovation

    African Journals Online (AJOL)

    The purpose of Innovation journal of appropriate librarianship and information work in Southern Africa is to publish material on libraries, information supply and other related matters in South and Southern Africa. Vol 45 (2012). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ...

  3. Role of demonstration projects in innovation: transition to sustainable energy and transport

    DEFF Research Database (Denmark)

    Klitkou, Antje; Coenen, Lars; Andersen, Per Dannemand

    2013-01-01

    towards more sustainability. However, the design and proper mix of such instruments is still to be better developed, as is the knowledge on possible effects of these instruments. This applies also on demonstration projects and programmes. This paper attempts to review two important strands on literature...... relevant for our understanding of demonstration projects and trials for the transition towards more sustainability: Firstly, the literature on demonstration projects and trials, applying rather different conceptual frameworks, among others technological innovation systems, and secondly, the broad...... review with a short but to our mind relevant account of transition theory. Our literature review is guided by the research questions for the InnoDemo project: 1. What are the main contributions of Scandinavian demonstration and trial projects and programmes to sustainable energy and transport transitions...

  4. Impacts of Leadership on Project-Based Organizational Innovation Performance: The Mediator of Knowledge Sharing and Moderator of Social Capital

    Directory of Open Access Journals (Sweden)

    Junwei Zheng

    2017-10-01

    Full Text Available With the increasing importance of leadership in project-based organizations, innovation is essential for the sustainable development of construction projects. Since few studies have explored the relationship between leadership and innovation in construction projects, this study fills this research gap and makes a significant theoretical contribution to the existing body of literature. Based on a knowledge-rated and resource-based view, this study aims to investigate various effects of different types of leadership on innovation performance in a construction project-based organization. Therefore, a theoretical model was constructed to explore the mediation mechanism and boundary condition of different types of leadership to improve innovation. The theoretical model was validated with empirical data covering project managers and engineers from the project-based organization in China via regression analysis and path analysis. The results show that transformational leadership and transactional leadership have some positively significant effects on knowledge sharing and innovation performance. Meanwhile, knowledge sharing partially mediates the relationship between transformational leadership and/or transactional leadership and innovation performance. Additionally, by considering different levels of social capital, transformational leadership is likely to have a strong positive impact on innovation performance through knowledge sharing. Our findings ensure a better understanding of the role of leadership, knowledge management, and social capital in the innovation process of construction projects. Therefore, project managers should promote a higher stimulation of a leadership behavior, encouraging knowledge management, and establishing the social capital, thus improving the innovation performance in the project-based organizations in construction projects.

  5. Impacts of Leadership on Project-Based Organizational Innovation Performance: The Mediator of Knowledge Sharing and Moderator of Social Capital

    OpenAIRE

    Junwei Zheng; Guangdong Wu; Hongtao Xie

    2017-01-01

    With the increasing importance of leadership in project-based organizations, innovation is essential for the sustainable development of construction projects. Since few studies have explored the relationship between leadership and innovation in construction projects, this study fills this research gap and makes a significant theoretical contribution to the existing body of literature. Based on a knowledge-rated and resource-based view, this study aims to investigate various effects of differe...

  6. Power supply projects a collection of innovative and practical design projects

    CERN Document Server

    Maplin

    1996-01-01

    Using circuit diagrams, PCB layouts, parts lists and clear construction and installation details, this book provides everything someone with a basic knowledge of electronics needs to know in order to put that knowledge into practice.This latest collection of Maplin projects are a variety of power supply projects, the necessary components for which are readily available from the Maplin catalogue or any of their high street shops. Projects include, laboratory power supply projects for which there are a wide range of applications for the hobbyist, from servicing portable audio and video equipment

  7. DEMETERRES project: development of innovative technologies for removing radionuclides from contaminated solid and liquid matrices

    Science.gov (United States)

    Chagvardieff, Pierre; Barré, Yves; Blin, Virginie; Faure, Sylvain; Fornier, Anne; Grange, Didier; Grandjean, Agnès; Guiderdoni, Emmanuel; Henner, Pascale; Siroux, Brice; Leybros, Antoine; Messalier, Marc; Paillard, Hervé; Prévost, Thierry; Rennesson, Malvina; Sarrobert, Catherine; Vavasseur, Alain; Véry, Anne-Aliénor

    2017-09-01

    As part of the « post-accidental » management, the DEMETERRES project (RSNR PIA) proposes to develop innovative and environmentally friendly methods for removal of cesium and strontium from soils and liquid matrices in order to rehabilitate them for an agricultural use while minimizing the volume of generated wastes in accordance with the nuclear waste existing processes. Complementary approaches are used: they are based on physico-chemical technologies (such as foams flotation, supercritical CO2 extraction, extractants in fluidized bed reactor …) and biological ones (bioextractants, phytoextraction) which concepts are described. These researches aim to design innovative and performing extractants in term of selectivity and to achieve the pilot reactor phase for each of them. These pilots will group in a network to provide a technological platform lasting the project, to which will be attached an available network of experts. The respective advances of these researches are presented, completed of tests initiated in Japan on contaminated soils through partnerships.

  8. Team collaborative innovation management based on primary pipes automatic welding project

    International Nuclear Information System (INIS)

    Li Jing; Wang Dong; Zhang Ke

    2012-01-01

    The welding quality of primary pipe directly affects the safe operation of nuclear power plants. Primary pipe automatic welding, first of its kind in China, is a complex systematic project involving many facets, such as design, manufacturing, material, and on-site construction. A R and D team was formed by China Guangdong Nuclear Power Engineering Co., Ltd. (CNPEC) together with other domestic nuclear power design institutes, and manufacturing and construction enterprises. According to the characteristics of nuclear power plant construction, and adopting team collaborative innovation management mode, through project co-ordination, resources allocation and building production, education and research collaborative innovation platform, CNPEC successfully developed the primary pipe automatic welding technique which has been widely applied to the construction of nuclear power plant, creating considerable economic benefits. (authors)

  9. Economic and ecological advantages of innovative project implementation at woodworking industry

    Directory of Open Access Journals (Sweden)

    Irina N. Yepifanova

    2015-03-01

    Full Text Available Orientation to innovative development involves the strategic focus onto manufacturing high-tech products in the priority sectors of the economy. Implementation of innovative projects aimed at reducing the energy component in overall costs of enterprise is demanded and necessary. The aim of the research is to prove the economic and ecological benefits of using at domestic wood industry enterprises the wood pellets as an alternative biofuel. The main economic indicators of the project for the pellets production presented indicate the expenses-to-profits ratio; studied is the cost of season heating in Ukraine of 1000 m2 with both traditional and alternative fuels. Noted is that the use of pellets as ecological biofuel is more economical in comparison with electricity and gas. Exposed are the economic benefits of the pellet boiler heating by different fuels.

  10. Committees and sponsors

    Science.gov (United States)

    2011-10-01

    International Advisory Committee Richard F CastenYale, USA Luiz Carlos ChamonSão Paulo, Brazil Osvaldo CivitareseLa Plata, Argentina Jozsef CsehATOMKI, Hungary Jerry P DraayerLSU, USA Alfredo Galindo-UribarriORNL & UT, USA James J KolataNotre Dame, USA Jorge López UTEP, USA Joseph B NatowitzTexas A & M, USA Ma Esther Ortiz IF-UNAM Stuart PittelDelaware, USA Andrés SandovalIF-UNAM Adam SzczepaniakIndiana, USA Piet Van IsackerGANIL, France Michael WiescherNotre Dame, USA Organizing Committee Libertad Barrón-Palos (Chair)IF-UNAM Roelof BijkerICN-UNAM Ruben FossionICN-UNAM David LizcanoININ Sponsors Instituto de Ciencias Nucleares, UNAMInstituto de Física, UNAMInstituto Nacional de Investigaciones NuclearesDivisión de Física Nuclear de la SMFCentro Latinoamericano de Física

  11. Expert Meeting Report: Key Innovations for Adding Energy Efficiency to Maintenance Projects

    Energy Technology Data Exchange (ETDEWEB)

    Wood, A.; Wiehagen, J.

    2012-09-01

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic, Key Innovations for Adding Energy Efficiency to Maintenance Projects, was intended to provide direction to more focused efforts to increase the efficiency of existing homes; in this meeting, the focus was specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  12. POST-CRISIS REHABILITATION OF HEAVY MASCHINES ON THE BASIS OF INNOVATIVE PROJECTS

    OpenAIRE

    N. V. Pasetchnik; I. A. Surkov

    2011-01-01

    Russian economy modernization strategic aims can be attained only on the basis of normally functioning machine-building, metallurgic and energetic industries. However, basic heavy machines used in enterprises of these industries at present are under operation for 30 to 40 years and got worn up to 65–85%. Rehabilitation of these machines is to be carried out on the basis of thorough diagnostics and innovative projects that would make it possible to preserve the machines’ basic heavy components...

  13. INNOVATION

    DEFF Research Database (Denmark)

    Helms, Niels Henrik

    2012-01-01

    Kravet om innovation og kreativitet er på flere måder en stor og en ny udfordring for voksenuddannelserne. Det udfordrer det didaktiske dilemma, det at vi skal gøres til kompetente og frie mennesker gennem pædagogiske handlinger, som netop pålægger os en ufrihed. – Men hvor denne ufrihed tidligere...... kunne begrundes med, at skolen eller uddannelsen vidste bedre, så er det ikke længere tilfældet. Skolen skal sørge for, at vi lærer noget – og ikke noget andet. Men det kan ikke længere med bestemthed afgøres, hvad det er vi skal lære i skolen, fordi det nye, det kreative og ikke mindst innovative...

  14. Innovation

    OpenAIRE

    2012-01-01

    Présenté par FutuRIS, plate-forme prospective sur la recherche, l’innovation et la société animée par l’Association Nationale de la Recherche et de la Technologie, ce volume livre un panorama du système français de recherche et d’innovation dans son environnement européen. Sont abordés dans une première partie les champs décisionnels concernés, les politiques nationales menées en matière de R&D, les relations entre enseignement supérieur et recherche et l’Espace européen de la recherche à l’h...

  15. On Brazil's participation in the International Project on Innovative Nuclear Reactors and Fuels Cycles (INPRO)

    International Nuclear Information System (INIS)

    Goncalves Filho, Orlando Joao Agostinho

    2007-01-01

    In response to a resolution of its 44th General Conference (GC(44)/RES/21) held in September 2000, the International Atomic Energy Agency launched in May 2001 the International Project on Innovative Nuclear Reactors and Fuels Cycles (INPRO) with the objective of supporting the safe, sustainable, economic and proliferation-resistant use of nuclear technology to meet the global energy needs of the 21st century. Brazil joined the project from its beginnings and in 2005 submitted a proposal for the screening assessment using INPRO methodology of two small-size light-water reactors as potential components of an innovative nuclear reactor system (INS) completed with a conventional open nuclear fuel cycle. The INS reactor components currently being assessed are the International Reactor Innovative and Secure (IRIS) that is being developed by an international consortium made of 21 organizations from 10 countries (Brazil included) led by the Westinghouse Company, and the Fixed Bed Nuclear Reactor (FBNR) that is being developed at the Federal University of Rio Grande do Sul. This paper gives an overview of Brazil's participation in INPRO, highlighting the objective, scope and intermediate results of the assessment study being performed, and the possibilities for participation in one or two collaborative research projects under INPRO Phase 2 Action Plan for 2008-2009. (author)

  16. The IAEA international project on innovative nuclear reactors and fuel cycles (INPRO): current and future activities

    International Nuclear Information System (INIS)

    Kupitz, J.; Depisch, F.; Kuznetsov, V.

    2004-01-01

    Upon resolutions of the IAEA General Conference in 2000, the IAEA initiated International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). The objective of INPRO, which comprises two phases, is to support sustainable deployment and use of nuclear technology to meet the global energy needs in the next 50 years and beyond. During Phase I, work is subdivided into two sub phases. Phase 1A focused on determining user requirements in the areas of economics, environment, safety, proliferation resistance, and recommendations in the area of so-called crosscutting issues, which are legal, institutional, and infrastructure issues accompanying the deployment of nuclear power, and is targeted at developing a methodology and guidelines for the assessment of various nuclear reactor and fuel cycle concepts and approaches. Phase 1A was finalised in June 2003 with its results now available as IAEA TECDOC-1362. Phase 1B has started in July 2003. During this phase interested Member States are performing case studies to validate the INPRO methodology and, later on, to assess selected innovative nuclear energy systems using the updated INPRO methodology. In accordance with the INPRO Terms of Reference, after successful completion of Phase I, Phase II may be initiated to examine the feasibility of commencing international projects on innovative nuclear energy systems. The paper contains a description of the current and future activities of INPRO and summarizes the outcome of the project.(author)

  17. Boosting innovation in the water sector--the role and lessons learned from collaborative projects.

    Science.gov (United States)

    Alegre, H; Coelho, S T; Feliciano, J F; Matos, R

    2015-01-01

    A key worldwide challenge in most sectors is to boost the effective adoption of innovation, as underpinned by the new European Union research programme Horizon 2020, which focuses on increasing innovation in Europe from 2014 to 2020. This is particularly relevant in the water sector, often perceived as conservative and averse to change. This paper discusses the role that collaborative knowledge-transfer projects can play in effectively rolling out R&D in the water industry. LNEC (Laboratório Nacional de Engenharia Civil) has designed a structured model based on a phased programme and a network of utilities and researchers. The paper presents the core principles, the rationale, the model and methods used, and the theoretical background, as well as the project's impact, outcomes and products. The discussion highlights the lessons learnt and provides a formal analysis of the advantages of focusing on middle management as an effective entry point, even if innovation is needed across the organization. Making training materials, guidelines, use cases, data and software publicly available after the project's end has proven to have a decisive multiplying effect. The paper also argues in favour of the collaborative model as a basis for R&D sustainability, and details on-going and planned developments.

  18. Exploration and practice for engineering innovative talents training based on project-driven

    Science.gov (United States)

    Xu, Yishen; Lv, Qingsong; Ye, Yan; Wu, Maocheng; Gu, Jihua

    2017-08-01

    As one of the "excellent engineer education program" of the Ministry of Education and one of the characteristic majors of Jiangsu Province, the major of optoelectronic information science and engineering in Soochow University has a long history and distinctive features. In recent years, aiming to the talents training objective of "broad foundation, practiceoriented, to be creative", education and teaching reforms have been carried out, which emphasize basis of theoretical teaching, carrier of practical training, promotion of projects and discussion, and development of second class. By optimizing the teaching contents and course system of the theoretical courses, the engineering innovative talents training mode based on the project-driven has been implemented with playing a practical training carrier role and overall managing the second class teaching for cultivating students' innovative spirit and practical ability. Meanwhile, the evaluation mechanism of the students' comprehensive performance mainly based on "scores of theory test" is being gradually changed, and the activities such as scientific research, discipline competitions and social practices are playing an increasing important role in the students' comprehensive assessment. The produced achievements show that the proposed training model based on project-driven could stimulate the students' enthusiasm and initiative to participate in research activities and promote the training of students' ability of engineering practice and consciousness of innovation.

  19. NASA Small Business Innovation Research Program. Composite List of Projects, 1983 to 1989

    Science.gov (United States)

    1990-01-01

    The NASA SBIR Composite List of Projects, 1983 to 1989, includes all projects that have been selected for support by the Small Business Innovation Research (SBIR) Program of NASA. The list describes 1232 Phase 1 and 510 Phase 2 contracts that had been awarded or were in negotiation for award in August 1990. The main body is organized alphabetically by name of the small businesses. Four indexes cross-reference the list. The objective of this listing is to provide information about the SBIR program to anyone concerned with NASA research and development activities.

  20. Deploying innovative technologies to improve DOE D ampersand D project baselines

    International Nuclear Information System (INIS)

    Rose, R.W.

    1997-05-01

    The insertion of innovative technologies to replace baseline technologies used in cost estimation and planning of DOE D ampersand D projects is considered a high risk endeavor by project and programmatic decision makers. It is almost always considered safer to go with the open-quotes devil you knowclose quotes than use a new or untried technology, methodology or system. The decision on the specific technology to be utilized to remediate a problem is often made months or years in advance of execution, and the highly proscriptive documentation of agreements necessary to obtain stakeholder and regulator approval of remedial plans is often counterproductive to considering improved technologies

  1. Technological Innovation Projects: Proposal For an Integrative Model Between Project Management and Knowledge Management in a Customer-Supplier Perspective

    Directory of Open Access Journals (Sweden)

    Edval da Silva Tavares

    2014-10-01

    Full Text Available In face of strong competition, companies in Brazil have increased their financial investments in automation, offering new products and services and reducing operating costs. These companies are focusing their efforts on core competencies and, therefore, they often lack the internal expertise to implement new projects, especially those that bring technological innovation. For this reason, we use the processes of outsourcing or subcontracting to help implement such projects. The unit of analysis in this study is the project and the object of the study to analyze the process of knowledge transfer from a provider to a customer during the duration of the project, which involves new technologies. The main motivation of this work is to address the acquisition and retention of new knowledge related to projects designed for business customers. We have developed a study of three cases of multiple financial firms that buy new technologies and two suppliers of information technology. As a practical result, a management model of knowledge transfer and retention of knowledge in client companies is proposed and incorporated into project management.

  2. Drivers and obstacles for employee-driven innovation in large client project organisations

    DEFF Research Database (Denmark)

    Sørensen, Henrik; Wandahl, Søren

    2012-01-01

    of employees’ spoken and tacit knowledge in development of new tools and structures to optimise the construction project management processes is a relatively new approach to engage innovation. In this broad perspective the aim is to map the boundary conditions for an EDI approach in a client project...... organisation and compare these with the theoretical methodology for conduction EDI. Trough the methods of case studies and observations this study will discover the conditions such as drivers and obstacles for EDI within larger client project organisations. The field around EDI will be explored thorough...... a literature review to clarify the most potential methodologies and tools. Based on this review a framework of tools and methods is derived from related development theories to engage EDI in client project organisa-tions, where product and process knowledge often are closely related to, and irregular driven by...

  3. The adoption and diffusion processes of a regional marketing project in Swiss mountain agriculture : Implications for innovation management

    OpenAIRE

    Theler, Christoph; Lehmann, Bernard

    1998-01-01

    In this article, renewal processes in agriculture are analysed from the point of view of innovation theory and innovation management. On the basis of a marketing project for regional label products in a swiss mountain region, factors influencing the adoption and, there after, the diffusion of the innovation « production of regional label products )) are identified. To this end, the survey method is used. Data was acquired by interviewing experts (explorative investigation) and by means of a m...

  4. Match & Manage : The use of knowledge matching and project management to integrate knowledge in collaborative inbound open innovation

    OpenAIRE

    Lakemond, Nicolette; Bengtsson, Lars; Laursen, Keld; Tell, Fredrik

    2016-01-01

    Despite mounting evidence on the potential benefits of inbound open innovation, little is known about how firms purposefully manage inflows of knowledge. We investigate the use of two knowledge governance procedures—project management and knowledge matching—in collaborative inbound open innovation. Our findings suggest that, in addition to “knowledge-precursors,” which the literature on open innovation and absorptive capacity has shown to be important for the integration of external knowledge...

  5. 14 CFR 152.103 - Sponsors: Airport development.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Sponsors: Airport development. 152.103 Section 152.103 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Sponsors: Airport development. (a) To be eligible to apply for a project for airport development with...

  6. Innovation

    OpenAIRE

    2011-01-01

    Cette publication biennale, dont voici le septième volume, recense les tendances et les grandes orientations scientifiques, technologiques et industrielles, dans l’ensemble de la zone OCDE, ainsi que dans les grandes économies non membres. Outre les notes par pays en matière de recherche et d’innovation, le rapport présente l’évolution des politiques nationales et leur évaluation en termes de « dosage ». Comme l’OCDE célèbre cette année son 50e anniversaire, cette édition 2010 comporte égalem...

  7. Innovating Science Teaching by Participatory Action Research – Reflections from an Interdisciplinary Project of Curriculum Innovation on Teaching about Climate Change

    Directory of Open Access Journals (Sweden)

    Timo Feierabend

    2011-01-01

    Full Text Available This paper describes a three-year curriculum innovation project on teaching about climate change. The innovation for this study focused on a socio-critical approach towards teaching climate change in four different teaching domains (biology, chemistry, physics and politics. The teaching itself explicitly aimed at general educational objectives, i.e., fostering students’ communication and evaluation abilities as essential components for preparing young people for active participation in society. Participatory Action Research has been used as a collaborative strategy of cyclical curriculum innovation and research. Using past experiences and selected results from accompanying research, this project and its methodology will be reflected upon from the viewpoint of the chemistry group taking part in the project. Core issues reflected upon include how the project contributed to the creation of feasible curriculum materials, how it led to innovative structures in practice, and whether it supported experienced teachers’ ongoing professional development. General considerations for the process of curriculum innovation will also be derived.

  8. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology into Aeronautics Research Mission Directorate Projects for 2016

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2017-01-01

    This report is intended to help NASA program and project managers incorporate Small Business Innovation Research (SBIR) technologies into NASA Aeronautics Research Mission Directorate (ARMD) projects. Other Government and commercial project managers interested in ARMD funding opportunities through NASA's SBIR program will find this report useful as well.

  9. How Configuration Management (CM) Can Help Project Teams To Innovate and Communicate

    Science.gov (United States)

    Cioletti, Louis

    2009-01-01

    Traditionally, CM is relegated to a support role in project management activities. CM s traditional functions of identification, change control, status accounting, and audits/verification are still necessary and play a vital role. However, this presentation proposes CM s role in a new and innovative manner that will significantly improve communication throughout the organization and, in turn, augment the project s success. CM s new role is elevated to the project management level, above the engineering or sub-project level in the Work Breakdown Structure (WBS), where it can more effectively accommodate changes, reduce corrective actions, and ensure that requirements are clear, concise, and valid, and that results conform to the requirements. By elevating CM s role in project management and orchestrating new measures, a new communication will emerge that will improve information integrity, structured baselines, interchangeability/traceability, metrics, conformance to standards, and standardize the best practices in the organization. Overall project performance (schedule, quality, and cost) can be no better than the ability to communicate requirements which, in turn, is no better than the CM process to communicate project decisions and the correct requirements.

  10. Innovation

    OpenAIRE

    2008-01-01

    A l’heure où le gouvernement fédéral accroît ses dépenses de R&D de 7 % pour réaliser l’objectif de Lisbonne des 3 % de R&D dans le PIB à l’horizon 2010, cette étude publiée par la Fondation Hans Böckler du DGB tombe à point nommé. Ses auteurs passent en revue pour les évaluer les politiques d’innovation technologique menée par 9 Länder, dont bien entendu la Bavière et le Bade-Wurtemberg, mais aussi la Saxe ou la Sarre. (ib)

  11. The international project on innovative nuclear reactors and fuel cycles (INPRO): status and outlook

    International Nuclear Information System (INIS)

    Steur, R.; Kupitz, J.; Depisch, F.

    2004-01-01

    Full text: During the last fifty years remarkable results are achieved in the application of nuclear technology for the production of electricity. Looking ahead to the next fifty years it is clear that the demand for energy will grow considerably and also new requirements for the way the energy will be supplied have to be fulfilled. Following a resolution of the General Conference of the IAEA in the year 2000 an International Project on Innovative Nuclear Reactors and Fuel Cycles, referred to as INPRO, was initiated. The main objectives of INPRO are to: Help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21st century in a sustainable manner; and Bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles. Within INPRO the future of the energy demand and supply was explored and several scenario's identified. A leading requirement for energy supply is coming up and will play a crucial role: sustainability of the way the energy supply will be realized. Fulfilling the growing need for energy in developing countries is as well an important issue. Based on these scenario's for the next fifty years, requirements for the different aspects of the future of nuclear energy systems, such as economics, sustain ability and environment, safety, waste and proliferation resistance have been identified as well a methodology developed. to assess innovative nuclear systems and fuel cycles. On the base of this assessment, the need for innovations and breakthroughs in existing technology can be defined. To facilitate the deployment of innovative nuclear systems also different aspects of the infrastructure, technical as well institutional have been reviewed and recommendations for changes are made to anticipate main developments in the world such as the ongoing globalisation. As a contribution to the conference

  12. Improving access to research outcomes for innovation in agriculture and forestry: the VALERIE project

    Directory of Open Access Journals (Sweden)

    Luca Bechini

    2017-06-01

    Full Text Available Many excellent results are obtained in agricultural and forestry research projects, but their practical adoption is often limited. The aim of the European project VALERIE is to increase the transfer and application of innovations produced by research in agriculture and forestry, by facilitating their integration into management practices. The project is still ongoing and the results illustrated in this paper are still temporary and subject to being improved. Here we present the methodology used in VALERIE to extract and summarise knowledge for innovation from research documents with the aim of making it available to final users through ask-Valerie.eu; we also report on current progress. The tasks associated with extracting and summarising knowledge are centred on: i an ontology; ii a document base; and iii a system (ask-Valerie.eu that allows users to effectively search the document base. An ontology defines a set of concepts and the relations between them. The VALERIE ontology is built by experts in the agricultural and forestry domain and contains 6169 concepts (21st October 2016. The document base is the collection of documents in which the system searches. The VALERIE document base includes scientific and practical documents derived from various sources, written in any of a number of languages. All documents contained in the document base are annotated using the ontology: each term (a word or a short phrase in the document that matches a concept in the VALERIE-ontology is linked to that concept. Annotation is an automated process that takes place whenever a document is added to the document base. The document base contains 4278 documents (October 2016. Among them, there are 201 minifactsheets written by members of the VALERIE project, each describing an innovation with: a short description of the innovation, a list of correlated projects, and some links to scientific and practical documents. ask-Valerie.eu searches documents and fragments of

  13. KEY ASPECTS OF MANAGING AN INNOVATION PROJECT IN THE EU FRAMEWORK PROGRAMME HORIZON 2020

    Directory of Open Access Journals (Sweden)

    Siniša M. Arsić

    2015-01-01

    Full Text Available The program EU Horizon 2020 (ec.europa.eu is the largest source of resources for all legal entities from Europe, with the budget of 80 billion €. It is possible to use donations from the EU for various proposals and themes, from the 91 calls for projects, with subjects differing from sustainable transport to the innovation support of the SME sector. A group of Serbian authors decided to enter into somewhat of an ambitious endeavour (authors had individual experience on projects, they decided to send a project proposal in the framework of the „SME Instrument“ call, which is directed to inovation support project in the SME sector. The projects that are proposed for the financing by the EU Horizon 2020 program, are in the group of complex and very specific projects, so the authors presented the review of key aspects of projects that are engaged in realization of the inovation process that starts with a certain idea on paper, and ends with a verified product which is placed on the competitive EU market. The special chapter of this paper deals with the sinergy of the inovation project explorers, which must answer to the multidisciplinarity of research problems. The possibilities are examined in the research of the technical-technological sciences, by using organizational-informatic tools, developed for the needs of managing projects. The main use of this work for readers are illuminating of numerous unknown technical details regarding the proposal itself, and the process of connecting with the project partners, because the large number of proposals quits off right at the beginning. Then contribution is reflected in the fact that the paper signifies a sort of basis for a knowledge base, which can be served to higher education institutions and economy to focus a part of their intentions on lifting their own capacity for the struggle with the massive competition of EU that is expected in years and decades to come.

  14. Innovation

    African Journals Online (AJOL)

    The article reports on an action research project to investigate the effectiveness of an information literacy intervention for first-year engineering students at the Cape Peninsula University of Technology (CPUT). The intervention consisted of two workshops which aimed at teaching the students to find information relevant to ...

  15. AUDIT OF INNOVATIVE IDEAS AS THE PREVIOUS STAGE OF THE BUSINESS-PLAN OF START-UP PROJECTS

    Directory of Open Access Journals (Sweden)

    O. Zhylinska

    2014-09-01

    Full Text Available The phenomenon of feasibility reasoning of venture capital investment for the implementation of innovative ideas is revealed. The main elements of the methodology for feasibility of start-up projects, based on the concept of combination of life cycle of the market, product innovation and startup companies, are characterized. The comparative analysis of methods feasibility study and business plan start-up project is made, the importance of innovative ideas audit in future economic information generation and investment decisions of informal venture capital investors are shown.

  16. Sustainable energy for cashew production chain using innovative clean technology project developments

    Energy Technology Data Exchange (ETDEWEB)

    Pannir Selvam, P.V.; Nandenha, Julio; Santiago, Brunno Henrique de Souza; Silva, Rosalia Tatiane da [Universidade Federal do Rio Grande do Norte (GPEC/DEQ/UFRN), Lagoa Nova, RN (Brazil). Dept. de Engenharia Quimica. Grupo de Pesquisa em Engenharia de Custos e Processos], e-mail: pannirbr@gmail.com

    2006-07-01

    The main objective is to develop a new process synthesis based on the residual biomass waste for the energy production applied to the fruit processing plant with co-production of hot, cold thermal energy using biogas from the wood biomass and animal wastes. After carried out the bibliographical research about the current state of art technology, an engineering project had been developed with the use of the software Super Pro Designer V 4.9. Some simulations of processes of the fast pyrolysis, gasification, bio digestion, generation of energy have been realized including the system integration of energy production as innovation of the present work. Three cases study have been developed: first, the current process of conventional energy using combustion, another one using combined pyrolysis and gasification, and the last one with bio digestion for combined power, heat and chilling. The results about the project investment and the cost analysis, economic viability and cash balance were obtained using software Orc 2004. Several techno-economic parameters of the selected cases study involving process innovation were obtained and compared, where a better energy and materials utilization were observed in relation to conventional process. This project which is still in development phase, involves small scale energy integrated system design. The energy and the process integration cashew fruit production chain, based on the clean technology process design, has enable significant improvement in terms of economic and environmental using optimal system configurations with viability and sustainability. (author)

  17. The role of action research in the investigation and diffusion of innovations in health care: the PRIDE project.

    Science.gov (United States)

    Waterman, Heather; Marshall, Martin; Noble, Jenny; Davies, Helen; Walshe, Kieran; Sheaff, Rod; Elwyn, Glyn

    2007-03-01

    In this article, the authors discuss the role of action research in relation to the investigation and practical implementation of innovations in health care. The diffusion of innovations is an essential component of the modernization of health services worldwide. However, the literature shows that it is not an easy process to research. A paradox is noted that although action research has much to offer, it has had only a limited impact in the innovation field. Drawing on an example of a project in the United Kingdom, the authors discuss whether action research is a valuable method in the study of the diffusion of innovations. They analyze its strengths and limitations as a "whole systems approach" that combines researching with developing and diffusing innovations. They argue that it is best suited to the study of innovation diffusion where there is a need for high level of adaptation in each new setting.

  18. Barriers to innovation within large financial services firms : An in-depth study into disruptive and radical innovation projects at a bank

    NARCIS (Netherlands)

    Das, P.A.C.; Verburg, R.M.; Verbraeck, A.; Bonebakker, Lodewijk

    2017-01-01

    Purpose - Since the 2008 financial crisis, the financial industry is in need of innovation to increase stability and improve quality of services. The purpose of this paper is to explore internal barriers that influence the effectiveness of projects within large financial services firms focussing on

  19. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany. Reporting period 1993. Progress report

    International Nuclear Information System (INIS)

    1994-10-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the Forschungsbetreuung at the GRS, (FB) (Research Coordination Department), within the framework of general information of progress in reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. (orig./HP)

  20. Sustainable innovation: key conclusions from Sustainable Innovation Conferences 2003–2006 organised by The Centre for Sustainable Design

    OpenAIRE

    Charter, Martin; Clark, Tom

    2007-01-01

    The following is taken directly from the introduction. This booklet summarises the key conclusions from the 2003–2006 conferences on Sustainable Innovation organised by The Centre for Sustainable Design (www.cfsd.org.uk). The conclusions are drawn from the respective conference presentations, papers and discussions. The publication has been sponsored as part of a ‘Centre of Excellence in Sustainable Innovation & Design’ project awarded to The Centre for Sustainable Design by the South-East...

  1. Report on Department of Homeland Security Sponsored Research Project at Lawrence Livermore National Laboratory on Preparation for an Improvised Nuclear Device Event

    Energy Technology Data Exchange (ETDEWEB)

    A., B

    2008-07-31

    Following the events of September 11th, a litany of imaginable horribles was trotted out before an anxious and concerned public. To date, government agencies and academics are still grappling with how to best respond to such catastrophes, and as Senator Lieberman's quote says above, now is the time to plan and prepare for such events. One of the nation's worst fears is that terrorists might detonate an improvised nuclear device (IND) in an American city. With 9/11 serving as the catalyst, the government and many NGOs have invested money into research and development of response capabilities throughout the country. Yet, there is still much to learn about how to best respond to an IND event. My summer 2008 internship at Lawrence Livermore National Laboratory afforded me the opportunity to look in depth at the preparedness process and the research that has been conducted on this issue. While at the laboratory I was tasked to collect, combine, and process research on how cities and the federal government can best prepare for the horrific prospect of an IND event. Specific projects that I was involved with were meeting reports, research reviews, and a full project report. Working directly with Brooke Buddemeier and his support team at the National Atmospheric Release Advisory Center, I was able to witness first hand, preparation for meetings with response planners to inform them of the challenges that an IND event would pose to the affected communities. In addition, I supported the Homeland Security Institute team (HSI), which was looking at IND preparation and preparing a Congressional report. I participated in meetings at which local responders expressed their concerns and contributed valuable information to the response plan. I specialized in the psycho-social aspects of an IND event and served as a technical advisor to some of the research groups. Alongside attending and supporting these meetings, I worked on an independent research project which collected

  2. International Project on Innovative Nuclear Reactors and Fuel Cycles: Introduction and Education and Training Activity

    International Nuclear Information System (INIS)

    Fesenko, G.; Kuznetsov, V.; Phillips, J.R.; Rho, K.; Grigoriev, A.; Korinny, A.; Ponomarev, A.

    2015-01-01

    The IAEA’s International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was established in 2000 through IAEA General Conference resolution with aim to ensure that sustainable nuclear energy is available to help meet the energy needs of the 21st century. INPRO seeks to bring together technology holders, users and newcomers to consider jointly the international and national actions required for achieving desired innovations in nuclear reactors and fuel cycles, with a particular focus on sustainability and needs of developing countries. It is a mechanism for INPRO Members to collaborate on topics of joint interest. INPRO activities are undertaken in close cooperation with Member States in the following main areas: Global Scenarios, Innovations, Sustainability Assessment and Strategies, Policy and Dialogue. The paper presents short introduction in INPRO and specifically the distant Education and Training INPRO activity on important topics of nuclear energy sustainability to audiences in different Member States. These activities can support capacity building and national human resource development in the nuclear energy sector. The main benefit of such training courses and workshops is that it is not only targeted to students, but also to lecturers of technical and nuclear universities. Moreover, young professionals working at nuclear energy departments, electric utilities, energy ministries and R&D institutions can participate in such training and benefit from it. (authors)

  3. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2003. Progress report

    International Nuclear Information System (INIS)

    2003-01-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers

  4. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2002. 2. progress report

    International Nuclear Information System (INIS)

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [de

  5. Using the Health Physics Student Volunteer Program for a Research Project Sponsored by the Medical Section of the Health Physics Society.

    Science.gov (United States)

    Steiner, Joseph; Leinwander, Penny

    2017-04-01

    The Health Physics Society (HPS) Medical Health Physics Section (MHPS) received a request to research data on radiation safety guidance related to the death of patients who have recently received therapeutic doses of sealed or unsealed therapy sources. The MHPS elected to use student volunteers to perform this research. The purpose of this manuscript is to describe and provide a template for the process used by the MHPS to develop a student volunteer program. To implement the student volunteer program, the MHPS collaborated with the HPS Student Support Committee to develop a research proposal and a student volunteer selection process. The research proposal was sent to HPS student members in a call for volunteers. Two student volunteers were chosen based on predetermined qualifications to complete the work effort outlined in the research proposal. This project progressed with the use of milestones and culminated with the students presenting their findings at the annual HPS meeting. The students received HPS student travel awards to present at the conference. This work effort proved to be extremely beneficial to all parties involved.

  6. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany 1988

    International Nuclear Information System (INIS)

    1989-06-01

    The GRS (Society for Reactor Safety), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the FB (Research Coordination Department) Forschungsbetreuung at the GRS, within the framework of general information of progress in the reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. Besides the progress reports, lists of reports exchanged under international exchange agreements by the BMFT are published within this series. (orig./HP)

  7. Service-learning and learning communities: two innovative school projects that are mutually enriched

    Directory of Open Access Journals (Sweden)

    Carmen ÁLVAREZ ÁLVAREZ

    2015-12-01

    Full Text Available This article reflects on the interrelationships that exist between two educational projects of today: service-learning (ApS and learning communities (CdA. The ApS is an educational methodology applied worldwide where a single project combines a learning based on experience with the implementation of a service to the community. CdA is a school transformation project to achieve that the information society does not exclude any person, constituting a reality in more than one hundred and ninety schools in Spain and Latin America. Between the two, it is possible to show differences, especially in what refers to its theoretical substrates, but in actual teaching practice in schools there is some harmony, particularly in the so closely that they cultivate both projects with the school community. Therefore, we conclude that service-learning and learning communities can occur as two innovative and relevant today projects which can be mutually enriching: because for both the approach school-community-environment and volunteering is essential.

  8. Integration between GBC Historic Building® and BIM: the methodological innovation for conservation project workflow

    Directory of Open Access Journals (Sweden)

    Federico Ferrari

    2016-06-01

    Full Text Available The development of design with the support of BIM software represents ideas and forms that result from interdisciplinary integration. The combination of different instrumentation allows the architectural surfaces modeling to develop a 3D model similar to the real architectural characteristics. Through this you can create a database of information collected in situ. The complexity of the data, discretized into a single shared database, sets a level of attention to the conservative project according to the GBC Historic Building® rating system.The use of BIM software in relation to the assessment system allows designers to formulate measurable innovations in the project phase, in the construction phase, and in the entire building life cycle.

  9. EU Climate-KIC Innovation Blue Green Dream Project: Creation of Educational Experience, Communication and Dissemination

    Science.gov (United States)

    Tchiguirinskaia, Ioulia; Gires, Auguste; Vicari, Rosa; Schertzer, Daniel; Maksimovic, Cedo

    2013-04-01

    The combined effects of climate change and increasing urbanization call for a change of paradigm for planning, maintenance and management of new urban developments and retrofitting of existing ones to maximize ecosystem services and increase resilience to the adverse climate change effects. This presentation will discuss synergies of the EU Climate-KIC Innovation Blue Green Dream (BGD) Project in promoting the BGD demonstration and training sites established in participating European countries. The BGD demonstration and training sites show clear benefits when blue and green infrastructures are considered together. These sites present a unique opportunity for community learning and dissemination. Their development and running acts as a hub for engineers, architects, planners and modellers to come together in their design and implementation stage. This process, being captured in a variety of media, creates a corpus of knowledge, anchored in specific examples of different scales, types and dimensions. During the EU Climate-KIC Innovation Blue Green Dream Project, this corpus of knowledge will be used to develop dissemination and training materials whose content will be customised to fit urgent societal needs.

  10. Mobilizing local innovation capacity through a simulation game in a participatory research project on agricultural innovation in El Brahmi irrigation scheme (Tunisia).

    Science.gov (United States)

    Dolinska, Aleksandra; d'Aquino, Patrick; Imache, Amar; Dionnet, Mathieu; Rougier, Jean-Emmanuel

    2015-04-01

    In the framework of the European Union and African Union cooperative research to increase Food production in irrigated farming systems in Africa (EAU4Food project) we conducted a participatory research on the possible innovative practices to increase production of dairy farms in the irrigation scheme El Brahmi in Tunisia in the face of changing economic, political and environmental conditions. Our aim was to find effective research method to stimulate farmers' participation in the innovation process. Although the capacities of farmers in producing knowledge and in innovating are recognized and the shift from the linear model of technology transfer towards more participatory approaches to innovation is postulated, in which the role of researchers changes from providing solutions towards supporting farmers in finding their own solutions, in practice, the position of farmers in shaping innovation practice and process remains weak. After a series of participatory workshops and in-depth interviews with the actors of the local innovation system we developed and tested a simple open simulation game Laitconomie for farmers. The game proved to be effective in increasing our understanding of the system as the farmers were adding new elements and rules while playing, and in mobilizing farmers' knowledge (including tacit knowledge) in the simulated innovation process. The result reported by the participants was learning how to improve farm management, soil fertility management and cow nutrition practices. Some of the participants used the game as a decision support tool. While our game and its scope were modest and mobilized only two types of players (farmers and extension agent), open simulation proved to be a useful tool to analyze a local innovation system. Designing similar type of tools that would mobilize more diverse players and hence have a larger scope can be imagined.

  11. Innovative Approaches To Educating Medical Students for Practice in a Changing Health Care Environment: The National UME-21 Project.

    Science.gov (United States)

    Rabinowitz, Howard K.; Babbott, David; Bastacky, Stanford; Pascoe, John M.; Patel, Kavita K.; Pye, Karen L.; Rodak, John, Jr.; Veit, Kenneth J.; Wood, Douglas L.

    2001-01-01

    Describes the major curriculum changes that have been implemented through Undergraduate Medical Education for the 21st Century (UME-21), a 3-year national demonstration project to encourage innovation in medical education. Discusses challenges that occurred in carrying out those changes, and outlines the strategies for evaluating the project. (EV)

  12. Different perspectives of success in innovative projects: a comparative analysis of the Design for Six Sigma and Design Thinking approaches

    Directory of Open Access Journals (Sweden)

    Karyn Martinelli Lopes

    2016-09-01

    Full Text Available The purpose of this paper is to explore the alignment of the DFSS and DT approaches to innovative projects and the dimensions of success applied to evaluate them. A qualitative research strategy was applied, with the development of a case study in 2014 at a financial company that practices both approaches. The study involved the data analysis of eight projects, four DFSS and four DT. Descriptive statistics and the Mood median test were applied in order to interpret and summarize the results. The results indicate that the approach selected influences the project’s dimensions of success and that DT projects tend to have greater perspectives of success in innovation.

  13. Using the regularities of high and critical technologies developing in innovative project management

    OpenAIRE

    S. G. Selivanov; S. V. Poezjalova; A. F. Shayhulova

    2014-01-01

    Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE) integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and con...

  14. Employer-sponsored pension plans

    OpenAIRE

    Rakonjac-Antić Tatjana N.

    2004-01-01

    Apart from pension plans within social insurance, in developed pension systems there are also available to individuals schemes which may to a large extent ensure a significant part of their total pension. Among them are the following: employer-sponsored pension plans or individual pension plans. The most widely used employer-sponsored pension plan in the USA is 401(k), in which both the employer and the employee contribute to the financing of the pension. These contributions as well as the re...

  15. People Centered Innovation: Enabling Lean Integrated Project Delivery and Disrupting the Construction Industry for a More Sustainable Future

    Directory of Open Access Journals (Sweden)

    William Paolillo

    2016-01-01

    Full Text Available People-centered innovation is a paradigm shift in the construction industry. It is derived from the supposition that people not methods, schedules, or budgets deliver projects. Our data suggest that a multilevel, multidisciplinary project team through shared vision, values, and a common vernacular defines, designs, and delivers more successful projects than traditional methods. These projects meet the needs of shareholders, the community, stakeholders, and the planet. We employ the concepts of emotional intelligence and agency theory to explain an integrated project delivery (IPD construction project using lean tactics that not only delivered, but also exceeded expectations resulting in a six-month schedule acceleration and $60M savings over the original estimated cost of the project calculated assuming traditional project delivery methods. The safety rating for this project was 50% better than the national average and the expected improvement in operating margin for the new building is 33% greater. This paper introduces the notion of people-centered innovation to an industry that has struggled to adapt and show positive results over recent decades. Our case study describes the significance of people-centered innovation in construction project delivery. We discuss the implications for the construction industry going forward.

  16. To promote the engineering innovative abilities of undergraduates by taking projects as the guidance and competitions as the promotion

    Science.gov (United States)

    Xu, Yishen; Wu, Di; Chen, Daqing; Gu, Jihua; Gao, Lei

    2017-08-01

    According to the inherent requirements of education for talents' knowledge, quality and comprehensive ability and the major training goals of optoelectronics information science and engineering, in order to enhance the undergraduates' comprehensive practical ability and consciousness of innovation, we carried out the reforms of teaching method and teaching mode, which took the training programs of innovation and entrepreneurship for undergraduates, extracurricular academic research fund, "Chun-Tsung Scholar" program or research projects of their tutors as the guidance, and took the all levels of relevant discipline competitions as the promotion. And the training mainline of engineering innovation talents as "undergraduate's tutorial system ->innovative training program or tutor's research project ->academic competition ->graduation projects (thesis)" was constructed stage by stage by combining the undergraduates' graduation projects and their participated academic competition into one for improving the quality of the graduation projects (thesis). The practical results of the last several years illuminate that the proposed training model can effectively stimulate the students' awareness of autonomous learning, enhance their comprehensive ability of analyzing and solving problems and improve their ability of engineering practice and innovation as well as their teamwork spirit.

  17. Promoting Profit Model Innovation in Animation Project in Northeast Asia: Case Study on Chinese Cultural and Creative Industry

    OpenAIRE

    Hao Jiao; Yupei Wang; Hongjun Xiao; Jianghua Zhou; Wensi Zeng

    2017-01-01

    Building on a case study of three animation companies in the Chinese cultural and creative industry, this study aims to understand how profit model innovation is promoted. Due to the rapidly changing environments and resource scarcity, cultural and creative companies need to select the appropriate profit model according to their own key resources. The study uncovers two critical factors that promote profit model innovation in animation projects: the quantity of consumers and their consumption...

  18. Expert evaluation of innovation projects of mining enterprises on the basis of methods of system analysis and fuzzy logics

    Directory of Open Access Journals (Sweden)

    Pimonov Alexander

    2017-01-01

    Full Text Available This paper presents the multipurpose approach to evaluation of research and innovation projects based on the method of analysis of hierarchies and fuzzy logics for the mining industry. The approach, implemented as part of a decision support system, can reduce the degree of subjectivity during examinations by taking into account both quantitative and qualitative characteristics of the compared innovative alternatives; it does not depend on specific conditions of examination and allows engagement of experts of various fields of knowledge. The system includes the mechanism of coordination of several experts’ views. Using of fuzzy logics allows evaluating the qualitative characteristics of innovations in the form of formalized logical conclusions.

  19. The IAEA international project on innovative nuclear reactors and fuel cycles (INPRO): status and outlook

    International Nuclear Information System (INIS)

    Depisch, F.; Kupitz, J.; Sokolov, Y.; Omoto, A.

    2005-01-01

    During the last fifty years remarkable results have been achieved in the application of nuclear technology for the production of electricity. Looking ahead to the next fifty years it is clear that the demand for energy will grow considerably and also new requirements have to be fulfilled for the way nuclear energy will be supplied. Following a resolution of the General Conference of the IAEA in the year 2000 an International Project on Innovative Nuclear Reactors and Fuel Cycles, referred to as INPRO, was initiated. Based on scenarios for the next fifty years, requirements for the different aspects of the future of nuclear energy systems, such as economics, environment, safety, waste, proliferation resistance and infrastructure have been identified as well a methodology developed to assess innovative nuclear systems and fuel cycles. On the basis of this assessment, the need for innovations in existing nuclear technology, to be achieved via research, development and demonstration (RD and D), can be defined. INPRO developed the above mentioned requirements during its first step, called Phase 1A, which lasted from 2001 to middle of 2003. In the following second step, called Phase 1B (first part), INPRO organized 14 case studies (8 by national teams and 6 by individuals) to test and validate the methodology. INPRO has finished end of 2004 the first part of Phase 1B, by issuing an IAEA report (TECDOC1434) with an upgraded methodology based on the recommendations given in the case studies. The paper summarizes the status of INPRO as well as the main results and provides an outlook on the future activities. (authors)

  20. Management Innovations in Higher Education: A Descriptive Study of Information Technology Managers' Perceptions Regarding the Use and Value of Project Management in Institutions of Higher Education

    Science.gov (United States)

    Durbin, Michael P.

    2013-01-01

    This study examined the perspectives of IT managers working in colleges and universities regarding their use of and value for project management. Descriptive and inferential analyses were used to understand individual innovativeness, innovation characteristics of project management, and the perceived use of and value for project management best…

  1. Self-reliance and innovation of Qinshan phase II NPP project

    International Nuclear Information System (INIS)

    Ye Qizhen; Yang Lanhe

    2007-01-01

    This article mainly describes the self-reliance and innovation of Qinshan nuclear power project of phase II, in-between it contains new reactor core design, as well as related experimental and calculation analysis, especially for new reactor design produced fluid-induced vibration model test, theoretical analysis and testing in-built reactor; aiming at two-loop NSSS a series improvement made for safety systems and related safety analysis to enhance their reliability and redundancy; according to specialty of two-loop NSSS an optimization made for NPP parameters and design of related equipments, for the purpose to make the output of NPP maximal; design of main reactor building and T-G building also improved according to characteristics of two-loop NSSS and site conditions. CRDM and refueling machine are researched and manufactured on base of self-reliance, their performance are better than design requirements, large portion of key equipments are localized through different way. In construction first time realized the integrated erection of containment dome. During the commissioning non-nuclear steam driving of T-G set, as well as 500 kV high voltage rising using emergent diesel generator, etc. are carried out.In period of operation still continuous innovation and improvement are made, so that to keep the good record of operation. (authors)

  2. Building up an Equilateral Language Learning Triangle through Innovation and Pedagogic Improvement: The Example of an Educational Innovation Project

    Science.gov (United States)

    Martinez-Saez, Antonio; Sevilla-Pavon, Ana; Gimeno-Sanz, Ana

    2012-01-01

    In recent years, several initiatives relating to pedagogical innovation have been implemented at the Universitat Politecnica de Valencia (UPV), Spain, in order to integrate ICT into current teaching practices by means of combining the efforts made by teachers, students and the institution itself in terms of the support it provides. These three…

  3. The FLARES project: An innovative detector technology for rare events searches

    Energy Technology Data Exchange (ETDEWEB)

    Capelli, S., E-mail: capelli@mib.infn.it [Dipatimento di Fisica, Università di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); INFN Sezione di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); Baldazzi, G. [Università di Bologna, Viale Berti Pichat 6/2, 40127 Bologna (Italy); INFN Sezione di Bologna, Viale Berti Pichat 6/2, 40127 Bologna (Italy); Beretta, M. [Dipatimento di Fisica, Università di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); INFN Sezione di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); Bonvicini, V. [Dipartimento di Scienza dei Materiali, Università di Milano Bicocca, Via Roberto Cozzi 55, 20126 Milano (Italy); Campana, R. [Università di Bologna, Viale Berti Pichat 6/2, 40127 Bologna (Italy); INFN Sezione di Bologna, Viale Berti Pichat 6/2, 40127 Bologna (Italy); Evangelista, Y. [INAF - IAPS, Via del Fosso del Cavaliere 100, I-00133, Roma (Italy); INFN Sezione di Roma Tor Vergata, Via della Ricerca Scientifica 1, I-00133 Roma (Italy); Fasoli, M. [INFN Sezione di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); Dipartimento di Scienza dei Materiali, Università di Milano Bicocca, Via Roberto Cozzi 55, 20126 Milano (Italy); Feroci, M. [INAF - IAPS, Via del Fosso del Cavaliere 100, I-00133, Roma (Italy); INFN Sezione di Roma Tor Vergata, Via della Ricerca Scientifica 1, I-00133 Roma (Italy); Fuschino, F. [INFN Sezione di Bologna, Viale Berti Pichat 6/2, 40127 Bologna (Italy); Università di Bologna, Viale Berti Pichat 6/2, 40127 Bologna (Italy); Gironi, L. [Dipatimento di Fisica, Università di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); INFN Sezione di Milano Bicocca, piazza della Scienza 3, 20126 Milano (Italy); and others

    2017-02-11

    FLARES is an innovative project in the field of rare events searches, such as the search for the neutrinoless double beta decay. It aims at demonstrating the high potential of a technique that combines ultra-pure scintillating crystals with arrays of high performance silicon drift detectors, operated at about 120 K, to reach a 1% level energy resolution. The proposed technique will combine in a single device all the demanding features needed by an ideal experiment looking for rare events. The performance of a first production of matrices of silicon drift detectors as well as first measurements of the low temperature light yield of a selection of high purity scintillating crystals will be presented and discussed.

  4. Innovative characterization techniques and decision support systems for ground water contamination projects

    International Nuclear Information System (INIS)

    Hoffman, F.

    1992-07-01

    Ground water contamination projects throughout the world must be approached as individual and unique problems. Many traditional investigation techniques require modification to meet the needs of site-specific situations. Because the age of the science of contaminant hydrogeology can be measured only in a few decades, the field is ripe for innovation. This paper describes the following new technologies: At Lawrence Livermore National Laboratory (LLNL), we have developed a new drilling and sampling method, which allows the evaluation of the vertical extent of contamination in a single borehole. We are also using new fiber-optic-based chemical analytical sensors that promise to greatly increase the case of obtaining chemical analyses in the subsurface while greatly reducing costs. Because ground water investigations are data intensive, we need the best decision support system information tools to proceed with investigation and cleanup. These tools have three components: a relational database, data analysis tools, and tools for data display

  5. POST-CRISIS REHABILITATION OF HEAVY MASCHINES ON THE BASIS OF INNOVATIVE PROJECTS

    Directory of Open Access Journals (Sweden)

    N. V. Pasetchnik

    2011-01-01

    Full Text Available Russian economy modernization strategic aims can be attained only on the basis of normally functioning machine-building, metallurgic and energetic industries. However, basic heavy machines used in enterprises of these industries at present are under operation for 30 to 40 years and got worn up to 65–85%. Rehabilitation of these machines is to be carried out on the basis of thorough diagnostics and innovative projects that would make it possible to preserve the machines’ basic heavy components making up to 80% of their weight and cost and to update or replace active components (drive, control, mechanization, etc.. Since most of these enterprises are currently private-owned, certain organizational and legal actions are needed.

  6. Cigar Lake project abatement of August 2008 inflow - a story of innovation and relentless teamwork

    International Nuclear Information System (INIS)

    Forbes, R.; Dixon, B.; King, C.; Dent, A.

    2010-01-01

    'Full text:' The presentation recounts the process of finding August 2008 inflow, as well as planning and executing the inflow abatement project. Brian Dixon will speak regarding locating the inflow, preparing the inflow abatement plan, and preparing the underground work site at the (underwater) 420 meter level. Craig King will speak regarding design, procurement, and installation of the grout bag barrier adjacent to the No. 1 Shaft at the underwater work site. April Dent will speak regarding the surface abatement drilling and backfilling/grouting, as well as the testing of the completed inflow abatement work. The team will discuss the innovative methods to locate the source of inflow and steps taken to remediate it. (author)

  7. Cardiovascular disease risk assessment innovative approaches developed in HeartCycle project.

    Science.gov (United States)

    Paredes, S; Rocha, T; de Carvalho, P; Henriques, J; Morais, J; Ferreira, J; Mendes, M

    2013-01-01

    Two innovative CVD event risk assessment strategies were developed in the scope of HeartCycle project: i) combination of individual risk assessment tools; ii) personalization of risk assessment based on grouping of patients. These approaches aimed to defeat some of the major limitations of the tools currently applied in the daily clinical practice, namely to: i) improve the risk prediction performance when comparing it to the one achieved by the individual current risk assessment tools; ii) consider the available knowledge provided by other risk assessment tools; iii) cope with missing risk factors; iv) incorporate additional clinical knowledge. Two different real patients' datasets were applied to validate the developed strategies: i) Santa Cruz Hospital, Portugal, N=460 ACS-NSTEMI1 patients; ii) Leiria Pombal Hospital Centre, Portugal, N=99 ACS-NSTEMI. Based on the gathered results, we propose a new strategy in order to improve patients' stratification.

  8. Science Innovation

    Science.gov (United States)

    EPA provides innovative research activities that help transform the protection of human health and the environment with high-risk, high-reward Pathfinder Innovation Projects, the P3 student competition, and low-cost air monitoring.

  9. Employer-sponsored pension plans

    Directory of Open Access Journals (Sweden)

    Rakonjac-Antić Tatjana N.

    2004-01-01

    Full Text Available Apart from pension plans within social insurance, in developed pension systems there are also available to individuals schemes which may to a large extent ensure a significant part of their total pension. Among them are the following: employer-sponsored pension plans or individual pension plans. The most widely used employer-sponsored pension plan in the USA is 401(k, in which both the employer and the employee contribute to the financing of the pension. These contributions as well as the return to their investment have a preferential tax treatment, i.e. do not enter a tax base. The funds are taxed only when drawn from the account in the form of a pension. This paper aims to present the functioning of 401(k pension plan as the most widely used employer sponsored pension plan in the USA, which is likely, in a modified form, to have an important place within our future reformed pension insurance system.

  10. Global Health Innovation Technology Models

    Directory of Open Access Journals (Sweden)

    Kimberly Harding

    2016-04-01

    Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innovation for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utilizing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to accelerate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

  11. Disruptive Innovation Patterns Driven by Mega-Projects: A Sustainable Development Pattern Case of China’s High-Speed Rail

    Directory of Open Access Journals (Sweden)

    Bingxiu Gui

    2018-04-01

    Full Text Available Sustainable development of mega-projects has drawn many concerns around the world. The theory of disruptive innovation in mega-projects is a typical sustainable development pattern but still lacks systematic understanding. This article takes China’s high-speed rail (CHSR project as an example to analyze the disruptive innovation pattern of mega-projects. First, this paper systematically traces the theories of disruptive innovation and summarizes the connotations of disruptive innovation. Simultaneously, from the historical development of several typical mega-projects in China, this paper summarizes the connotations of mega-projects. Based on two connotations, this paper summarizes the theoretical basis of disruptive innovation in mega-projects. Second, this paper takes the CHSR project as a case to analyze its innovation pattern from the analysis of the development process, operation mechanism and influence in sustainability; the disruptive innovation pattern is put forward afterward. Third, the discussion is drawn from the perspectives of the characteristics, scope of application and innovation environment of the disruptive innovation of CHSR. Last, the conclusions of this article are summarized.

  12. The indicators of the management system of projects of research, development and technological innovation of the Cuban Nuclear program

    International Nuclear Information System (INIS)

    Rodriguez Cardona, R.; Cobas Aranda, M.

    2012-01-01

    Organizations responsible for managing projects organised in programmes and projects, require as one of their main demands for the implementation of effective project management systems, i.e., in which to achieve the planned activities and expected results to be achieved. Indicators are key for any system management tools for its management. The objective of this work is to show a set of indicators used by the management system (SGP) projects of I+D+i (research, development and technological innovation) of the nuclear sector, which demonstrate that these indicators have correlation and are feasible for the characterization and management of the system. (author)

  13. SCIENTIFIC-PROJECT CONSULTING AS AN INNOVATIVE FORMAT OF POSTGRADUATE EDUCATION

    Directory of Open Access Journals (Sweden)

    G. A. Ignatieva

    2017-01-01

    Full Text Available Introduction. Today the main social and economic advantage of Russia in global economy (we do not take natural wealth into account is the human capital which development has to become a priority for all levels of an education system. The relevance of the article determined by the need to modernize the educational programs, technology and content of the educational process in the institutional space of postgraduate teacher education. It is one of the key factors in the development of the intellectual capital of a society, providing a transition to continuous, socially oriented, associated with global and domestic fundamental science education for all people and aimed at the formation of the creative socially responsible personality. The new mission of post-degree training «through all life», consisting in the advancing formation of intellectual potential of the country, demands search of new forms and methods of additional professional education.Aim. The aim of the article is to disclosure the essence of scientific-project consulting as an innovative format of teachers and scientific-pedagogical staff.Methods. The institutional approach is the basis of the study. In accordance with this approach, the development strategy and the areas of work of traditional and new institutions of post-degree education – Department of Pedagogy and Andragogy and the Center of Scientific and Design Consulting are designated. As methodological base of this type of consulting, it is offered to use provisions of the genetic-substantial theory of the developing education, in particular the principle of development regulating processes of continuous improvement of professionalism of experts of education and development of new functions by them in post-industrial society.Results. The conceptual model of a reflexive outline of management of process of formation of new professional positions of the teacher is constructed; its components are

  14. Adoption of innovative energy systems in social housing: Lessons from eight large-scale renovation projects in The Netherlands

    International Nuclear Information System (INIS)

    Hoppe, Thomas

    2012-01-01

    Thanks to new insights on the impacts that dwellings have throughout their life cycles, there has been increased attention to retrofitting innovative energy systems (IES) in existing housing. This paper uses an explorative case study design to gain more knowledge about the governance aspects of this under-researched topic. The central research question is: Which factors influence the adoption of innovative energy systems in social housing sites during renovation projects? To answer this question, eight large-scale renovation projects in The Netherlands were investigated. These case studies allowed the identification of barriers, enabling factors and perspectives from three main actors—housing associations, tenants and local authorities. It turns out that adopting IES encounters many barriers: lack of trust between project partners, delay in project progress, financial feasibility considerations, lack of support from tenants, lengthy legal permit procedures, over-ambitious project goals, poor experiences in previous projects, and IES ambitions that are not taken serious by key decision-makers. Furthermore, IES were only successfully fitted in three of the eight projects. Moreover, ambitions were lowered as the projects progressed in all the cases investigated. The study calls for further systematic, in-depth comparison of fitting IES in large-scale renovation projects in social housing. - Highlights: ► Attention to adoption of innovative energy systems in social housing. ► Several non-technical factors influence adoption. ► In-depth analysis of eight local-level renovation projects. ► Ambitions are lowered as projects progress. ► Barriers: financial feasibility, over-ambitious goals, delay, lack of trust.

  15. Development of a strategic plan for an international R and D project on innovative nuclear fuel cycles and power plants

    International Nuclear Information System (INIS)

    Kendall, J.; Choi, J.S.

    2002-01-01

    The long-term outlook for nuclear energy should be considered in a broader perspective of future energy needs, operational safety, proliferation and environmental impacts. An Advisory Group Meeting (AGM) on Development of a Strategic Plan for an International R and D Project on Innovative Nuclear Fuel Cycles and Power Plants was convened in Vienna in October 1999 to assess the criteria, the needs for international cooperation, and to formulate a strategic plan for project integration. (author)

  16. The Power of Collaboration: Experiences From the Educational Innovations Project and Implications for the Next Accreditation System.

    Science.gov (United States)

    Sweet, David B; Vasilias, Jerry; Clough, Lynn; Davis, Felicia; McDonald, Furman S; Reynolds, Eileen E; O'Malley, Cheryl W; Hinchey, Kevin T; Kirk, Lynne M; Gersoff, Andrew S; Clyburn, E Benjamin; Frohna, John G

    2014-09-01

    The Internal Medicine Educational Innovations Project (EIP) is a 10-year pilot project for innovating in accreditation, which involves annual reporting of information and less-restrictive requirements for a group of high-performing programs. The EIP program directors' experiences offer insight into the benefits and challenges of innovative approaches to accreditation as the Accreditation Council for Graduate Medical Education transitions to the Next Accreditation System. We assessed participating program directors' perceptions of the EIP at the midpoint of the project's 10-year life span. We conducted telephone interviews with 15 of 18 current EIP programs (83% response rate) using a 19-item, open-ended, structured survey. Emerging themes were identified with content analysis. Respondents identified a number of the benefits from the EIP, most prominent among them, collaboration between programs (87%, 13 of 15) and culture change around quality improvement (47%, 7 of 15). The greatest benefit for residents was training in quality improvement methods (53%, 8 of 15), enhancing those residents' ability to become change agents in their future careers. Although the requirement for annual data reporting was identified by 60% (9 of 15) of program directors as the biggest challenge, respondents also considered it an important element for achieving progress on innovations. Program directors unanimously reported their ability to sustain innovation projects beyond the 10-year participation in EIP. The work of EIP was not viewed as "more work," but as "different work," which created a new mindset of continuous quality improvement in residency training. Lessons learned offer insight into the value of collaboration and opportunities to use accreditation to foster innovation.

  17. Development of the System of Investment Support of Projects in the Industrial-Innovative Development of Kazakhstan

    Science.gov (United States)

    Doskaliyeva, Bayan B.; Orynbassarova, Yerkenazym D.; Omarkhanov?, Zhibek M.; Karibaev, Yerkebulan S.; Baimukhametova, Ayagul S.

    2016-01-01

    The purpose of this study is to determine specific features of investment regulation mechanism aimed at providing effective implementation of projects in the context of industrial-innovative development of Kazakhstan. There the used the system of general scientific and special research methods providing the possibility to disclose processes and…

  18. SOAP in Practice: Learning Outcomes of a Cross-Institutional Innovation Project Conducted by Teachers, Student Teachers, and Teacher Educators

    Science.gov (United States)

    Seezink, Audrey; Poell, Rob; Kirschner, Paul

    2010-01-01

    This paper reports on a case study investigating learning outcomes at the individual and organisational level of a cross-institutional innovation project based on the SOAP approach. SOAP integrates "S"chooling of teachers, "O"rganisational development of schools, "A"ction- and development-oriented research, and…

  19. SOAP in practice: learning outcomes of a cross-institutional innovation project conducted by teachers, student teachers, and teacher educators

    NARCIS (Netherlands)

    Prof. Dr. Rob F. Poell; Dr. Audrey Seezink; Prof. Dr. Paul A. Kirschner

    2010-01-01

    This paper reports on a case study investigating learning outcomes at the individual and organisational level of a cross-institutional innovation project based on the SOAP approach. SOAP integrates Schooling of teachers, Organisational development of schools, Action- and development-oriented

  20. Fashion retail innovation: about context, antecedents and outcome in technological change projects

    DEFF Research Database (Denmark)

    Tambo, Torben

    2015-01-01

    Fashion retail is recognised for its strong capabilities in product innovation, while also having the potential to improve the governance of technology-based process innovation. This chapter proposes a model perspective in management of technology and innovation, including special requirements...... of fashion retailing. In particular, this chapter discusses the context of fashion retailing understood as product and brand-based characteristics. A case study-based methodology is then used to guide an analysis of antecedents and (expected) outcome of fashion retail innovation. IT-based innovation...... characteristics of the fashion retail industry....

  1. Promoting Profit Model Innovation in Animation Project in Northeast Asia: Case Study on Chinese Cultural and Creative Industry

    Directory of Open Access Journals (Sweden)

    Hao Jiao

    2017-12-01

    Full Text Available Building on a case study of three animation companies in the Chinese cultural and creative industry, this study aims to understand how profit model innovation is promoted. Due to the rapidly changing environments and resource scarcity, cultural and creative companies need to select the appropriate profit model according to their own key resources. The study uncovers two critical factors that promote profit model innovation in animation projects: the quantity of consumers and their consumption intention. According to these two dimensions, the authors’ analysis shows profit model innovation in animation projects can be divided into Fans mode, Popular mode, Placement mode, and Failure mode, respectively. This study provides an empirical basis for advocating profit model innovation and discusses the resource requirements of Fan mode, Popular model, and Placement mode in China’s cultural and creative industry. The authors’ research also has managerial implications that might help firms promote profit model innovation. Finally, learning and promoting the profit model of China’s animation industry in the Northeast Asia area will be conducive to Northeast Asia’s cooperation and sustainable development.

  2. Management of Innovative Projects for Ensuring the Economic Safety in the Conditions of Integration of Economies into the World Economy

    Directory of Open Access Journals (Sweden)

    T. K. Usmanova

    2017-01-01

    Full Text Available Purpose: the aim of the article is to reveal problems and prospects, formulate economic security within the framework of innovation projects management, plan technologies in the context of integrating economies into the world economy, identify opportunities for forming, organizing, financing, managing priority economic directions. The subject is the management of innovative projects to ensure the economic security of Russian regions. The relevance of the chosen topic is due to the study of the features of the current state and the problems of the formation of economic security, the development of innovative design solutions in the context of integrating economies into the world economy. Ensuring the economic security of the regions of Russia directly depends on the introduction of innovative technologies and project management in the sectors of the national economy of Russia. Methods: the methodology of the solution of objectives is based on usage of a method of dialectic research, methods of the economic analysis, forecasting, the situational and systemic analysis, expert evaluations and the analysis of empirical data. Hypothesis. Ensuring an economic safety requires formation of innovative solutions, change of the current legislation within the Strategy of social and economic development in the conditions of integration of economies into the world economy. Results: the practical significance of the work is to identify the interrelationship between the development processes of innovative projects that ensure the economic security of the regions of Russia within the framework of regulating the current legislation, forecasting effective economic activity within the framework of the New Industrialization Strategy, selecting optimal project planning models to ensure the country's economic security and competitiveness in the conditions of integration Economies into the world economy. Conclusions and Relevance: in the conditions of integration of

  3. New Strategy and Innovative Projects at the National Biosurveillance Integration Center

    Science.gov (United States)

    Bennett, Steven; Quitugua, Teresa

    2013-01-01

    Objective Enhance knowledge of the vision, mission, strategic goals, and objectives of the National Biosurveillance Integration Center (NBIC). Learn about innovative biosurveillance projects ongoing in NBIC. Introduction For a number of years, the federal government has provided biosurveillance in various domains within different departments and agencies. Congress recognized the need for a means of integrating these separate information sources into a more useable resource by chartering NBIC within the Department of Homeland Security. Methods NBIC engaged the biosurveillance community within and beyond the federal government through a series of extensive discussions, workshops, and symposia to define a strategy for future development of integrated biosurveillance activities grounded in legislative and presidential direction. The NBIC Strategic Plan was extensively reviewed by the twelve federal Departments that comprise the National Biosurveillance Integration System (NBIS) as well as the White House Office of Management and Budget. The NBIC Strategic Plan is currently being revised for release of a public version. The NBIC also engaged partners in the development of projects designed to develop and test new approaches to biosurveillance. Results The NBIC Strategic Plan was delivered to Congress in August, 2012. The plan explains the Center’s approach, why it is needed, and how it seeks to execute the mission of integrating national biosurveillance information to provide relevant and timely information that effectively supports decision making. Projects are underway involving text analyses of emergency medical system data, changes to poison control center data collection and analysis, and the application of machine learning to social media analyses. A sub-working group of the NBIS has been established to guide selection of future pilot project areas to address prioritized requirements for integrated biosurveillance. Conclusions NBIC has increased flexibility in

  4. An innovative approach to multimedia waste reduction: Measuring performance for environmental cleanup projects

    International Nuclear Information System (INIS)

    Phifer, B.E. Jr.; George, S.M.

    1993-04-01

    One of the greatest challenges we now face in environmental cleanup is measuring the progress of minimizing multimedia transfer releases and achieving waste reduction. Briefly, multimedia transfer refers to the air, land, and water where pollution is not controlled, concentrated, and moved from one medium to another. An example of multimedia transfer would be heavy metals in wastewater sludges moved from water to land disposal. Over $2 billion has been budgeted for environmental restoration site cleanups by the Department of Energy (DOE) for FY 1994. Unless we reduce the huge waste volumes projected to be generated in the near future, then we will devote more and more resources to the management and disposal of these wastes. To meet this challenge, the Martin Marietta Energy Systems, Inc., Oak Ridge Environmental Restoration (ER) Program has explored the value of a multimedia approach by designing an innovative Pollution Prevention Life-Cycle Model. The model consists of several fundamental elements (Fig. 1) and addresses the two major objectives of data gathering and establishing performance measures. Because the majority of projects are in the remedial investigation phase, the focus is on the prevention of unnecessary generation of investigation-derived waste and multimedia transfers at the source. A state-of-the-art tool developed to support the life-cycle model for meeting these objectives is the Numerical Scoring System (NSS), which is a computerized, user-friendly data base system for information management, designed to measure the effectiveness of pollution prevention activities in each phase of the ER Program. This report contains a discussion of the development of the Pollution Prevention Life-Cycle Model and the role the NSS will play in the pollution prevention programs in the remedial investigation phase of the ER Program at facilities managed by Energy Systems for DOE

  5. Economics of seawater desalination with innovative nuclear reactors and other energy sources: the EURODESAL project

    International Nuclear Information System (INIS)

    Nisan, S.; Volpi, L.

    2004-01-01

    This paper summarises our recent investigations undertaken as part of the EURODESAL project on nuclear desalination, which were carried out by a consortium of four EU and one Canadian, Industrials and two leading EU R and D organisations. Major results of the project, in particular of its economic evaluation work package as discussed in this paper, are: 1. A coherent demonstration of the technical feasibility of nuclear desalination through the development of technical principles for the optimum cogeneration of electricity and water and by exploring the unique capabilities of the innovative nuclear reactors and desalination technologies; verification that the integrated system design does not adversely affect nuclear reactor safety. 2. The development of codes and methods for an objective assessment of the competitiveness and sustainability of proposed solutions through comparison, in European conditions, with fossil and renewable energy based solutions. The results obtained so far seem to be quite encouraging as regards the economical viability of nuclear desalination options. Thus, for example, specific desalination costs ($/m 3 of desalted water) for nuclear systems such as the AP600 and the French PWR900 (reference base case), coupled to Multiple Effect Distillation (MED) or the Reverse Osmosis (RO) processes, are 30% to 60% lower than fossil energy based systems using pulverised coal and natural gas with combined cycle, at low discount rates and recommended fuel prices. Even in the most unfavourable scenarios for nuclear energy (discount rates = 10%, low fossil fuel prices) desalination costs with the nuclear options with the nuclear reactors are 7% to 15% lower, depending upon the desalination capacities. Furthermore, with the high performance coupling schemes developed by the EURODESAL partners, the specific desalination costs of nuclear systems are reduced by another 2% to 14%, even without system and design optimisation. (author)

  6. Economics of seawater desalination with innovative nuclear reactors and other energy sources: the EURODESAL project

    Energy Technology Data Exchange (ETDEWEB)

    Nisan, S. [Direction de l' energie nucleaire (DEN), Departement d' etudes des reacteurs (DER), Service d' etudes des reacteurs innovants - SERI, Saint Paul-lez Durance Cedex (France)]. E-mail: simon.nisan@cea.fr; Volpi, L. [Direction de l' energie nucleaire (DEN), Departement d' etudes des reacteurs (DER), Service d' etudes des reacteurs innovants - SERI, Saint Paul-lez Durance Cedex (France)

    2004-07-01

    This paper summarises our recent investigations undertaken as part of the EURODESAL project on nuclear desalination, which were carried out by a consortium of four EU and one Canadian, Industrials and two leading EU R and D organisations. Major results of the project, in particular of its economic evaluation work package as discussed in this paper, are: 1. A coherent demonstration of the technical feasibility of nuclear desalination through the development of technical principles for the optimum cogeneration of electricity and water and by exploring the unique capabilities of the innovative nuclear reactors and desalination technologies; verification that the integrated system design does not adversely affect nuclear reactor safety. 2. The development of codes and methods for an objective assessment of the competitiveness and sustainability of proposed solutions through comparison, in European conditions, with fossil and renewable energy based solutions. The results obtained so far seem to be quite encouraging as regards the economical viability of nuclear desalination options. Thus, for example, specific desalination costs ($/m{sup 3} of desalted water) for nuclear systems such as the AP600 and the French PWR900 (reference base case), coupled to Multiple Effect Distillation (MED) or the Reverse Osmosis (RO) processes, are 30% to 60% lower than fossil energy based systems using pulverised coal and natural gas with combined cycle, at low discount rates and recommended fuel prices. Even in the most unfavourable scenarios for nuclear energy (discount rates = 10%, low fossil fuel prices) desalination costs with the nuclear options with the nuclear reactors are 7% to 15% lower, depending upon the desalination capacities. Furthermore, with the high performance coupling schemes developed by the EURODESAL partners, the specific desalination costs of nuclear systems are reduced by another 2% to 14%, even without system and design optimisation. (author)

  7. Putting E-government to work in healthcare environment: a multiregional project funded by the Italian Innovation & Technology Ministry.

    Science.gov (United States)

    Ballardini, Luigi; Germagnoli, Fabio; Pagani, Marco; Picchi, Marco; Stoppini, Andrea; Cristiani, Paolo

    2004-01-01

    In 2002, the Italian Ministry of Innovation promoted a national bid for e-government projects. Specifically it allocated a budget of 120 M euro. One of the four project approved in healthcare sector was the "Information, Care ("Assistenza" in Italian) and healthcare Education by the Web" (IAEW), with a global budget of 2580 k euro, partially financed by Ministry with a quota of 830 k euro. The project involves 12 medical structures (both national excellences centers and local regional hospitals) located in two different Region of North Italy, dealing with two different healthcare regional systems (Lombardia and Emilia-Romagna), with potentially 3 millions of users.

  8. Long-term assessment of an innovative mangrove rehabilitation project: case study on Carey Island, Malaysia.

    Science.gov (United States)

    Motamedi, Shervin; Hashim, Roslan; Zakaria, Rozainah; Song, Ki-Il; Sofawi, Bakrin

    2014-01-01

    Wave energy and storm surges threaten coastal ecology and nearshore infrastructures. Although coastal structures are conventionally constructed to dampen the wave energy, they introduce tremendous damage to the ecology of the coast. To minimize environmental impact, ecofriendly coastal protection schemes should be introduced. In this paper, we discuss an example of an innovative mangrove rehabilitation attempt to restore the endangered mangroves on Carey Island, Malaysia. A submerged detached breakwater system was constructed to dampen the energy of wave and trap the sediments behind the structure. Further, a large number of mangrove seedlings were planted using different techniques. Further, we assess the possibility of success for a future mangrove rehabilitation project at the site in the context of sedimentology, bathymetry, and hydrogeochemistry. The assessment showed an increase in the amount of silt and clay, and the seabed was noticeably elevated. The nutrient concentration, the pH value, and the salinity index demonstrate that the site is conducive in establishing mangrove seedlings. As a result, we conclude that the site is now ready for attempts to rehabilitate the lost mangrove forest.

  9. Long-Term Assessment of an Innovative Mangrove Rehabilitation Project: Case Study on Carey Island, Malaysia

    Science.gov (United States)

    Motamedi, Shervin; Hashim, Roslan; Zakaria, Rozainah; Song, Ki-Il; Sofawi, Bakrin

    2014-01-01

    Wave energy and storm surges threaten coastal ecology and nearshore infrastructures. Although coastal structures are conventionally constructed to dampen the wave energy, they introduce tremendous damage to the ecology of the coast. To minimize environmental impact, ecofriendly coastal protection schemes should be introduced. In this paper, we discuss an example of an innovative mangrove rehabilitation attempt to restore the endangered mangroves on Carey Island, Malaysia. A submerged detached breakwater system was constructed to dampen the energy of wave and trap the sediments behind the structure. Further, a large number of mangrove seedlings were planted using different techniques. Further, we assess the possibility of success for a future mangrove rehabilitation project at the site in the context of sedimentology, bathymetry, and hydrogeochemistry. The assessment showed an increase in the amount of silt and clay, and the seabed was noticeably elevated. The nutrient concentration, the pH value, and the salinity index demonstrate that the site is conducive in establishing mangrove seedlings. As a result, we conclude that the site is now ready for attempts to rehabilitate the lost mangrove forest. PMID:25097894

  10. Long-Term Assessment of an Innovative Mangrove Rehabilitation Project: Case Study on Carey Island, Malaysia

    Directory of Open Access Journals (Sweden)

    Shervin Motamedi

    2014-01-01

    Full Text Available Wave energy and storm surges threaten coastal ecology and nearshore infrastructures. Although coastal structures are conventionally constructed to dampen the wave energy, they introduce tremendous damage to the ecology of the coast. To minimize environmental impact, ecofriendly coastal protection schemes should be introduced. In this paper, we discuss an example of an innovative mangrove rehabilitation attempt to restore the endangered mangroves on Carey Island, Malaysia. A submerged detached breakwater system was constructed to dampen the energy of wave and trap the sediments behind the structure. Further, a large number of mangrove seedlings were planted using different techniques. Further, we assess the possibility of success for a future mangrove rehabilitation project at the site in the context of sedimentology, bathymetry, and hydrogeochemistry. The assessment showed an increase in the amount of silt and clay, and the seabed was noticeably elevated. The nutrient concentration, the pH value, and the salinity index demonstrate that the site is conducive in establishing mangrove seedlings. As a result, we conclude that the site is now ready for attempts to rehabilitate the lost mangrove forest.

  11. Maximizing the Impact of the NASA Innovations in Climate Education (NICE) Project: Building a Community of Project Evaluators, Collaborating Across Agencies & Evaluating a 71-Project Portfolio

    Science.gov (United States)

    Martin, A. M.; Chambers, L. H.; Pippin, M. R.; Spruill, K.

    2012-12-01

    Ann Martin, Lin Chambers, Margaret Pippin, & Kate Spruill, NASA The NASA Innovations in Climate Education (NICE) project at Langley Research Center in Hampton, VA, has funded 71 climate education initiatives since 2008. An evaluator was added to the team in mid-2011 to undertake an evaluation of the portfolio. The funded initiatives span across the nation and contribute to the development of a climate-literate public and the preparation of a climate-related STEM workforce through research experiences, professional development opportunities, development of data access and modeling tools, and educational opportunities in both K-12 and higher education. The portfolio of projects also represents a wide range of evaluation questions, approaches, and methodologies. The evaluation of the NICE portfolio has encountered context-specific challenges, including the breadth of the portfolio, the need to build up capacity for electronic project monitoring, and government-wide initiatives to align evaluations across Federal agencies. Additionally, we have contended with the difficulties of maintaining compliance with the Paperwork Reduction Act (PRA), which constrains the ability of NICE to gather data and approach interesting evaluative questions. We will discuss these challenges and our approaches to overcoming them. First, we have committed to fostering communication and partnerships among our awardees and evaluators, facilitating the sharing of expertise, resources, lessons learned and practices across the individual project evaluations. Additionally, NICE has worked in collaboration with NOAA's Environmental Literacy Grants (ELG) and NSF's Climate Change Education Partnerships (CCEP) programs to foster synergy, leverage resources, and facilitate communication. NICE projects, and their evaluators, have had the opportunity to work with and benefit from colleagues on projects funded by other agencies, and to orient their work within the context of the broader tri-agency goals

  12. Global Health Innovation Technology Models

    Directory of Open Access Journals (Sweden)

    Kimberly Harding

    2016-04-01

    Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innova‐ tion for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utiliz‐ ing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to acceler‐ ate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

  13. Joint Educational Projects as an Innovative Form of Cooperation between Russia and China in the XXI century

    Directory of Open Access Journals (Sweden)

    Elena Igorevna Medyanik

    2016-12-01

    Full Text Available The article describes the Russian-Chinese joint projects in the field of higher education as an innovative form of cooperation between the two countries in the new millennium. The author stresses that, in general, these projects are educational, while still not sufficiently developed research, innovation, investment and combined educational projects. But, despite this, there has been clear progress in relations between the two countries in this field. However, the author shows the growing role of international educational projects as an important and effective instruments of «soft power». At the same time, the research also showed that Sino-Russian educational projects are divided not only into bilateral but also into multilateral projects. That, in turn, allows Russia to promote their own culture and educational services in the different geopolitical regions that are the region of SCO and BRICS. Accordingly, increasing the attractiveness of culture and education will promote a positive image of Russia in the international arena. The author defines the Russian interests, problems and perspectives in the field of Russian-Chinese joint projects in the field of higher education.

  14. Jointly Sponsored Research Program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The Jointly Sponsored Research Program (JSRP) is a US Department of Energy (DOE) program funded through the Office of Fossil Energy and administered at the Morgantown Energy Technology Center. Under this program, which has been in place since Fiscal Year 1990, DOE makes approximately $2.5 million available each year to the Energy and Environmental Research Center (EERC) to fund projects that are of current interest to industry but which still involve significant risk, thus requiring some government contribution to offset the risk if the research is to move forward. The program guidelines require that at least 50% of the project funds originate from nonfederal sources. Projects funded under the JSRP often originate under a complementary base program, which funds higher-risk projects. The projects funded in Fiscal Year 1996 addressed a wide range of Fossil Energy interests, including hot-gas filters for advanced power systems; development of cleaner, more efficient processing technologies; development of environmental control technologies; development of environmental remediation and reuse technologies; development of improved analytical techniques; and development of a beneficiation technique to broaden the use of high-sulfur coal. Descriptions and status for each of the projects funded during the past fiscal year are included in Section A of this document, Statement of Technical Progress.

  15. The industrial research project: “Blu-Archeosys – Innovative Technologies and Advanced Systems as Support in Underwater Archaeology”

    Directory of Open Access Journals (Sweden)

    Salvatore Lorusso

    2003-02-01

    Full Text Available The reasons of the research about new technologies as support in naval and underwater archaeology or, more generally, in waters archaeology are various and described in this work, where the characteristics of the research project “BLU-ARCHEOSYS – Innovative Technologies and Advanced SYStems as Support in Underwater ARCHaeology” are illustrated. This industrial research project faces problems regarding innovative technologies and instruments in waters archaeology and it comprehends synergic steps and joined works among skilled professionals that have the competences to interpret qualitative and/or quantitative data within an artistic – historical and technical – historical study, also with the involvement of various public and private institutions. The BLUARCHEOSYS project has, in fact, the objective to create technologies that have a reply in underwater archaeology and contemporaneously in other sectors. In particular, starting from the methodological way that spans from the discovery in underwater or subaerial environment to the collocation of the objects in museums, the intent is to support the different methodological stages with specific tools and innovative technologies. The education project, presented to the Ministry with the research one, is articulated in the different branches of artistic-historical character, of the management, normative and operative character, and of the technical-diagnostic-material-preservative character. The professionals will have not only theoretical knowledge about standard and consolidated technologies, but they will be also experts about methodologies, in particular the diagnostic ones, that put in field the innovative tools evaluated in the project, with consequent competitive advantage in the working field, more and more demanding specific sector competences.

  16. DOE-EERC jointly sponsored research program

    Energy Technology Data Exchange (ETDEWEB)

    Hendrikson, J.G.; Sondreal, E.A.

    1999-09-01

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

  17. RISK MANAGEMENT PROJECTS EVALUATION OF INNOVATION IN SMALL AND MEDIUM-HIGH TECHNOLOGY USING THE PERSPECTIVE OF PRISM METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Taciana de Barros Jerônimo

    2011-10-01

    Full Text Available This study aims to analyze the failures of the activity of project management in small and medium-sized high-tech firms, using the tool PRISM. This postmortem methodology, proposed by Gary Pan, Shan L. and Ray Hackney Pan, analyzes the interactions between the components of the project during the exchange relationship between the project organization, information system and the users. Thus, the contribution of this work is to allow a formal analysis of the relationship between the sequence of events development projects into an innovative view, that provide insights into the potential success or failure of the project on medium-sized high-tech firms (whose the acronym is PMET.

  18. Innovation in Learning and Teaching Project Report: Data Analysis. August 2016/17

    Science.gov (United States)

    Higher Education Funding Council for England, 2016

    2016-01-01

    This document presents the findings of a small-scale qualitative study into the motivations of higher education providers for pursuing strategic-level innovations in learning and teaching; the source of these innovations; their impact on the learning experience of students; and their financial implications for higher education providers. The…

  19. 76 FR 16391 - Call for Innovative National Environmental Policy Act (NEPA) Pilot Project Proposals

    Science.gov (United States)

    2011-03-23

    ... practices or procedural innovations that can be replicated by other agencies or applied to other Federal... site, nepa.gov . Where appropriate, CEQ will advocate that agencies incorporate these best practices... agency implementation of NEPA through innovation, public engagement, and transparency. The NEPA Pilot...

  20. The IAEA international project on innovative nuclear reactors and fuel cycles (INPRO):status, development of approaches and outlook

    International Nuclear Information System (INIS)

    Khoroshev, M.; Sokolov, Y.; Facer, I.

    2005-01-01

    During the last fifty years remarkable results have been achieved in the application of nuclear technology for the production of electricity. Looking ahead to the next fifty years it is clear that the demand for energy will grow considerably and also new requirements have to be fulfilled for the way nuclear energy will be supplied, UNCSD, WSSD, IPCC and others have emphasized the substantial growth in 21st century energy supplies needed to meet sustainable development (SD) goals. This will be driven by continuing population growth, economic development and aspiration to provide access to modern energy systems to be 1,6 billion people now without such access, the growth demand on limiting greenhouse gas emissions, and reducing the risk oaf climate change. A key factor to the future of nuclear power is the degree to which innovative nuclear technologies can be developed to meet challenges of economic competitiveness, safety,waste and proliferation concerns. There are two major international initiatives in the area of innovative nuclear technology: the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycle (INPRO) and the Generation IV International Forum. Following a resolution of the General Conference of the IAEA in the year 2000 an International Project on Innovative Nuclear Reactors and Fuel Cycles, referred to as INPRO, was initiated (Authors)

  1. Jointly Sponsored Research Program Energy Related Research

    Energy Technology Data Exchange (ETDEWEB)

    Western Research Institute

    2009-03-31

    Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental

  2. Ergonomic project of the work and innovation in the virtual-actual dynamic: a theoretical-conceptual contribution

    Directory of Open Access Journals (Sweden)

    Gilbert Cardoso Bouyer

    2015-12-01

    Full Text Available The main purpose of this paper is to amplify the current theoretical scenario of “Ergonomics of Project” area, according to the knowledge creation/innovation theory, and his concepts of virtual and subjectivity in the Work. This theoretical-conceptual article aims to shed new light on the relations between innovation and present-day efforts toward a scientific theory of knowledge in the Work, with its complex structure of theories, hypotheses and disciplines. There is in this paper a new approach to understand  the Contemporary Ergonomic Project in a kind of Socio-Epistemological Engineering initiated by Markus F. Peschl in the University of Vienna. The methods employed were the systematic review and adaptation of Socio-Epistemological Engineering’s concepts in the actual context of epistemological and ontological principles of Ergonomics of Project.

  3. Guidance for the evaluation of innovative nuclear reactors and fuel cycles. Report of Phase 1A of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2003-06-01

    technicians of the calibre and size needed to support a truly substantial nuclear contribution to global energy supplies. To set out the boundary conditions for the desired innovations of nuclear energy systems, INPRO established several task groups to define: Prospects and Potentials of nuclear power within the next 50 years; User Requirements for innovative nuclear energy systems (INS) in the area of Economics, Sustainability and Environment, Safety, Waste Management, Proliferation Resistance, and Cross Cutting Issues; and Methodology for Assessment of INS. Having completed these tasks, it is planned that several Member States will apply the INPRO methodology to make a judgement on the potential of INS under consideration for development, to specify corresponding research, development and demonstration (RD and D) needs for their development, and to identify improvements in the methodology. The results achieved as of the end of April 2003 (Phase 1A) are presented in this report. It is intended to issue separately the working material on which this report is based and which was produced at a number of consultancy meetings held during the course of the Project

  4. The IAEA international project on innovative nuclear reactors and fuel cycles (INPRO): Status, ongoing activities and outlook

    International Nuclear Information System (INIS)

    Kupitz, J.; Depisch, F.; Khorochev, M.

    2004-01-01

    The IAEA General Conference (2000) invited 'all interested Member States to combine their efforts under the aegis of the IAEA in considering the issues of the nuclear fuel cycle, in particular by examining innovative and proliferation-resistant nuclear technology'. In response to this invitation, the IAEA initiated the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). The overall objectives of INPRO are to help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21 st century in a sustainable manner; and to bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles. INPRO is addressing the identification of full spectrum of user requirements for innovative technologies as well as the development of methodologies and guidelines for the comparison of different innovative approaches taking into account variations in potential demands across countries. INPRO can make major contributions by focusing on economic aspects, and societal acceptability issues and those areas where IAEA can make unique contributions such as proliferation resistance, nuclear safety, waste management and sustainability issues and providing assistance to the user community. To enhance the potential for the deployment of innovative technologies, some changes in the infrastructure under which nuclear energy is developed and used; should be envisaged. In order to fulfil these objectives, the first phase of INPRO dealt with the development of a methodology to assess and compare the performance of innovative nuclear energy systems (INS). This methodology includes the definition of a set of Basic principles, User requirements and Criteria to be met in different areas (Economics, Sustainability and environment, Safety of nuclear installations, Waste management and Proliferation resistance). The result of

  5. [Characteristics and innovation in projects of ethnomedicine and ethnopharmacology funded by National Natural Science Foundation of China].

    Science.gov (United States)

    Han, Li-wei

    2015-09-01

    The overall situation of projects of ethnomedicine and ethnopharmacology funded by the National Natural Science Foundation of China (NSFC) since 2008 has been presented in this paper. The main source of characteristics and innovation of the funded projects were summarized, which may come from several aspects, such as the ethnomedical theories, the dominant diseases of ethnomedicine, special diseases in ethnic minorities inhabited areas, unique ethnomedical therapy, special methods for applying medication, endemic medicinal materials in ethnic minorities inhabited areas, same medicinal materials with different applications. Examples have been provided to give references to the applicants in the fields of ethnomedicine and ethnopharmacology.

  6. ICT and mobile health to improve clinical process delivery. a research project for therapy management process innovation.

    Science.gov (United States)

    Locatelli, Paolo; Montefusco, Vittorio; Sini, Elena; Restifo, Nicola; Facchini, Roberta; Torresani, Michele

    2013-01-01

    The volume and the complexity of clinical and administrative information make Information and Communication Technologies (ICTs) essential for running and innovating healthcare. This paper tells about a project aimed to design, develop and implement a set of organizational models, acknowledged procedures and ICT tools (Mobile & Wireless solutions and Automatic Identification and Data Capture technologies) to improve actual support, safety, reliability and traceability of a specific therapy management (stem cells). The value of the project is to design a solution based on mobile and identification technology in tight collaboration with physicians and actors involved in the process to ensure usability and effectivenes in process management.

  7. The Convergence of Heat, Groundwater & Fracture Permeability. Innovative Play Fairway Modelling Applied to the Tularosa Basin Phase 1 Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, Carlon R. [Ruby Mountain Inc., Salt Lake City, UT (United States); Nash, Gregory D. [Univ. of Utah, Salt Lake City, UT (United States). Energy & Geoscience Institute; Sorkhabi, Rasoul [Univ. of Utah, Salt Lake City, UT (United States). Energy & Geoscience Institute; Moore, Joseph [Univ. of Utah, Salt Lake City, UT (United States). Energy & Geoscience Institute; Simmons, Stuart [Univ. of Utah, Salt Lake City, UT (United States). Energy & Geoscience Institute; Brandt, Adam [Univ. of Utah, Salt Lake City, UT (United States). Energy & Geoscience Institute; Barker, Benjamin [Univ. of Utah, Salt Lake City, UT (United States). Energy & Geoscience Institute; Swanson, Brigitte [Ruby Mountain Inc., Salt Lake City, UT (United States)

    2015-10-16

    This report summarizes the activities and key findings of the project team occurring during Phase 1 (August 2014-October 2015) of the Tularosa Basin Geothermal Play Fairway Analysis Project. The Tularosa Basin Play Fairway Analysis (PFA) project tested two distinct geothermal exploration methodologies covering the entire basin within South Central New Mexico and Far West Texas. Throughout the initial phase of the project, the underexplored basin proved to be a challenging, yet ideal test bed to evaluate effectiveness of the team’s data collection techniques as well as the effectiveness of our innovative PFA. Phase 1 of the effort employed a low-cost, pragmatic approach using two methods to identify potential geothermal plays within the study area and then compared and contrasted the results of each method to rank and evaluate potential plays. Both methods appear to be very effective and highly transferable to other areas.

  8. The IAEA International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO): Status, Ongoing Activities and Outlook

    International Nuclear Information System (INIS)

    Kupitz, Juergen; Depisch, Frank; Azpitarte, Osvaldo

    2004-01-01

    The IAEA General Conference (2000) invited 'all interested Member States to combine their efforts under the aegis of the IAEA in considering the issues of the nuclear fuel cycle, in particular by examining innovative and proliferation-resistant nuclear technology'. In response to this invitation, the IAEA initiated the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). The overall objectives of INPRO are to help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21. century in a sustainable manner, and to bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles. In order to fulfil these objectives, the first phase of INPRO dealt with the development of a methodology to assess and compare the performance of innovative nuclear energy systems. This methodology includes the definition of a set of Basic principles, User requirements and Criteria to be met in different areas (Economics, Sustainability and environment, Safety of nuclear installations, Waste management and Proliferation resistance). The result of this phase was presented in a IAEA document (IAEA-TECDOC-1362, Guidance for the evaluation of innovative nuclear reactors and fuel cycles) issued in June 2003. In the present phase of the project, case studies are being carried out in order to validate and improve the developed methodology and the defined set of Basic principles, User requirements and Criteria. This paper shortly summarizes the results published in IAEA-TECDOC-1362 and the ongoing actions related to case studies. Finally, an outlook of INPRO activities is presented. (authors)

  9. The greenhouse of the future: Using a sponsored competition in a capstone course

    Energy Technology Data Exchange (ETDEWEB)

    Bates, R.M.; Baumbauer, D.

    1998-02-18

    Educational objectives of capstone courses such as critical-thinking and problem-solving skills are among the most cited needs in curriculum revitalization efforts. Sponsored competitions present an important vehicle for achieving these educational objectives. Opportunities such as the Greenhouse of the Future Competition provide students a diverse range of critical experiences not easily simulated in traditional classroom settings. The objective of the competition was to provide an opportunity for US university students to conceptualize, design, integrate, fabricate, and demonstrate innovative greenhouse or controlled environment ideas. The students achieved a great sense of accomplishment and satisfaction by converting their ideas into proposals, developing proposals into experiments, tracking the data generated by the experiments and translating that data into a meaningful communication locally and to the scientific community at large. Most of these important learning experiences would have remained as components of the project even if the team had not advanced as the winning entry.

  10. The cross-border project between France and Italy MARS+. Sub-project - Innovative technologies for the mechanization of the areas hard to reach

    Directory of Open Access Journals (Sweden)

    G. Tirrò

    2013-09-01

    Full Text Available The care and protection of the mountain areas and their traditional crops were some of the reasons that led regional governments of Liguria and Tuscany to participate in the strategic project “Sea, Countryside and Land: potentiate the strategic unitarily” (MARS +. This project has also involved the participation of the four cross-border regions: Tuscany (leader, Sardinia, Liguria and Corsica. The aim was to promote the development of the innovations and entrepreneurship in the rural areas in order to increase competitiveness. In particular, the subproject SC has provided the transfer of innovations to facilitate the processes of mechanization in vineyards and olive orchards in contexts defined as “heroic”, areas of high landscape and environmental value in which the typical cultures has been always carried out, generally, on terraces or slopes. These conditions require a great effort by the farmers and result in high production costs. The transfer of the innovations has provided the organization of demonstration days in which the technological solutions for the management of the farming operations in vineyards and olive orchards were proposed and tested. During these events, the participative process was fundamentally reconfirmed, not only as a means to expand the knowledge of innovative products, but also as an opportunity for farmers, retailers, manufacturers, researchers, and local administrators to interact and facilitate the development of other technologies. The parameters that led to the innovative solutions included: the small size, user-friendliness, agility, and the ability of operating on systems not easily accessible. These products must also ensure the ergonomics and safety of workers performing all the growing operations. A thorough research of the available technologies and prototypes, still under development, affirms the presence of many innovations. These innovations not only allow the execution of all the field

  11. Integrating Subject Areas in Primary Education Curriculum: A Joint Innovative Project. Report of the Finalization Meeting (Bangkok, Thailand, December 9-15, 1981).

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and the Pacific.

    A project was developed to establish improved educational methods, techniques, and tools as well as to provide the knowledge base for educational innovation and programs of integrated curricula in primary schools. This final report highlights work conducted during 1980-81 in seven member countries of the Asian Program of Educational Innovation for…

  12. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Science Mission Directorate Projects at Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report is intended to help NASA program and project managers incorporate Glenn ResearchCenter Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR)technologies into NASA Science Mission Directorate (SMD) programs/projects. Other Government and commercial project managers can also find this useful.

  13. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Programs and Projects for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report is intended to help NASA program and project managers incorporate Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Aeronautics Research Mission Directorate (ARMD) projects. Other Government and commercial projects managers can also find this useful.

  14. Introducing an Innovative Project Management Framework for First Year Students – Project Work in a PBL Environment

    DEFF Research Database (Denmark)

    Kofoed, Lise B.; Møller, Michael Labovic

    2010-01-01

    in general acknowledge the benefits of thorough project plans and schedules, they often experience difficulties developing them and abiding by them. These experienced difficulties are caused by lack of motivation and competence within this particular area of project management. This paper describes how a new...... management (CLP) – which among other aspects teaches students how to organize and manage their studies in connection with project work. A major challenge at the University is to teach project management and especially project time management comprising proper planning and scheduling. Although the students...... project time management framework, specifically directed towards the interdisciplinary study of Medialogy at Aalborg University, has been developed to counteract said tendency. Results show that the framework is considered to be highly relevant by both the students as well as the faculty. Although...

  15. Practice and innovation on safety management of Haiyang Nuclear Power Project

    International Nuclear Information System (INIS)

    Wei Guohu

    2011-01-01

    From the perspective of owner, this article has introduced the safety management model and practice of Haiyang Nuclear Power Project, one of AP1000 Self-reliance Program supporting projects of China. And the article has summarized characteristics of the safety management of Haiyang Project for reference and communication with nuclear or other projects. (author)

  16. [Transparency as a prerequisite of innovation in health services research: deficits in the reporting of model projects concerning managed care].

    Science.gov (United States)

    Wiethege, J; Ommen, O; Ernstmann, N; Pfaff, H

    2010-10-01

    Currently, elements of managed care are being implemented in the German health-care system. The legal basis for these innovations are § 140, § 73, § 137, and §§ 63 et seq. of the German Social Code - Part 5 (SGB V). For the model projects according to §§ 63 et seq. of the German Social Code a scientific evaluation and publication of the evaluation results is mandatory. The present study examines the status of evaluation of German model projects. The present study has a mixed method design: A mail and telephone survey with the German Federal Social Insurance Authority, the health insurance funds, and the regional Associations of Statutory Health Insurance Physicians has been conducted. Furthermore, an internet research on "Medpilot" and "Google" has been accomplished to search for model projects and their evaluation reports. 34 model projects met the inclusion criteria. 13 of these projects had been terminated up to 30/9/2008. 6 of them have published an evaluation report. 4 model projects have published substantial documents. One model project in progress has published a meaningful interim report. 12 model projects failed to give information concerning the evaluator or the duration of the model projects. The results show a significant deficit in the mandatory reporting of the evaluation of model projects in Germany. There is a need for action for the legislator and the health insurance funds in terms of promoting the evaluation and the publication of the results. The institutions evaluating the model projects should obligate themselves to publish the evaluation results. The publication is an essential precondition for the development of managed care structures in the health-care system and in the development of scientific evaluation methods. © Georg Thieme Verlag KG Stuttgart · New York.

  17. Anticipating the use of future things: towards a framework for prospective use analysis in innovation design projects.

    Science.gov (United States)

    Nelson, Julien; Buisine, Stéphanie; Aoussat, Améziane

    2013-11-01

    Anticipation of future product use is a persistent issue in User-Centered Design. In this paper, we argue that one obstacle to early integration of use analysis in innovation design is overreliance on retrospective use analysis, i.e. that which is based on clear references to existing products or activities. In contrast, innovation design projects are full of uncertainty, leading to a need for prospective analysis. After having described some limitations of prospective use analysis, we contend that creativity tools may be used to assist the anticipation of future product use, by allowing designers to approach the variability of situations of future use in a structured manner rather than by "muddling through". We illustrate the expected benefits of this approach with two case studies, and describe some prospects for future research and practice in ergonomics. Copyright © 2013. Published by Elsevier Ltd.

  18. Linking satellite ICT application businesses with regional innovation centers and investors: The EC “INVESaT” project

    Science.gov (United States)

    Ghiron, Florence; Kreisel, Joerg

    2009-09-01

    In the sector of information and communication technologies (ICT), whether in the USA, Japan, or Europe, innovative services are already in use, based on large-scale space-based infrastructure investments. Such systems are e.g. earth observation, telecommunication, and navigation, timing and positioning satellites. In combination with the advent of powerful handheld terminals and the demand for ubiquitous services, it is expected that info-mobility applications will reveal new sources of business in the years ahead, using in particular the Earth observation and future GALILEO systems to position any feature or user anywhere in the world within a few meter accuracy. Hence, satellite-based capabilities provide new and unique opportunities for economic stimulation and development. Many incubators and innovation centers in Europe have already grasped this growth potential. Yet, for many European players business growth appears below expectations compared to developments in the USA following the launch of GPS (Global Positioning System). Europe still has to overcome intrinsic barriers to seize these new business opportunities faster and with more visible economic impact by leveraging on SMEs and regional innovation centers to expand the commercial utilization of satellite capabilities and mobilization of appropriate financial resources. The paper elaborates on the INVESat project (funded by the EuropeInnova—European Commission), which aims at bridging the gap between Innovative enterprises and financial In VEstors in the emerging markets of SaTellite applications. The critical success factors required to stimulate and support more efficiently investments in this bread of innovative services will also be highlighted.

  19. 75 FR 16125 - Call for Co-Sponsors for Office of Healthcare Quality's Programs to Strengthen Coordination and...

    Science.gov (United States)

    2010-03-31

    ... collaborating co-sponsors in the development and implementation of an innovative program that advances the goals...-associated infections (HAIs) exact a significant toll on human life. They are among the leading causes of...

  20. 76 FR 70722 - Request for Co-Sponsors for the Office of Healthcare Quality's Programs To Strengthen...

    Science.gov (United States)

    2011-11-15

    ... as collaborating co- sponsors in the development and implementation of an innovative program that... life. They are among the leading causes of preventable death in the United States. On average, 1 in 3...

  1. Creative Management as a Strategy for Breakthrough Innovation. Lessons from Basic Research Projects of Japanese Companies.

    Science.gov (United States)

    Lee, K. T.

    1997-01-01

    Japanese science/technology policies emphasize creative research management for strengthening breakthrough innovation. Key lessons include the following: cultivation of creative researchers, clear strategic directions, systematic teamwork and collaboration, focus on strategic industrial relevance, balance between autonomy and control, and the need…

  2. On the Cultivation of Automation Majors' Research Innovation Ability Based on Scientific Research Projects

    Science.gov (United States)

    Wang, Lipeng; Li, Mingqiu

    2012-01-01

    Currently, it has become a fundamental goal for the engineering major to cultivate high-quality engineering technicians with innovation ability in scientific research which is an important academic ability necessary for them. This paper mainly explores the development of comprehensive and designing experiments in automation based on scientific…

  3. Employee-Driven Innovation: A Brave New World in the Build Environment’s Project Organisations

    DEFF Research Database (Denmark)

    Sørensen, Henrik; Wandahl, Søren

    2013-01-01

    The build environment are often characterised by the fact that product and process knowledge are closely related to, and irregular driven by, individual employees. Therefore, a methodological approach to involve employees in development is seen as an advantageous way to be more innovative. Employ...

  4. The evaluation of knowledge claims in an innovation project : A case study

    NARCIS (Netherlands)

    Peters, K.; Jorna, R.J.J.M.; Maruster, L.

    2011-01-01

    Understanding how an organization determines what knowledge is valid leads to new insights about how firms cope with innovation. Although the evaluation of knowledge is a relevant topic in the field of knowledge management, the existing literature does not provide substantial contributions. Nonaka

  5. Changes in the first year : research report innovation project Mandy van der Gaag

    NARCIS (Netherlands)

    van der Gaag, Mandy; Kunnen, Saskia

    2014-01-01

    The department of psychology at the University of Groningen has implemented several innovations in the curriculum, in order to meet the requirements of the performance agreements the university has made with the Ministry of Education, Culture, and Science. One of the main aims is to reduce drop-out

  6. Lead User Projects in Practice — Results from an Analysis of an Open Innovation Accelerator

    DEFF Research Database (Denmark)

    Gutstein, Adele; Brem, Alexander

    2018-01-01

    regarding their specific processes, resources, challenges, and success factors, using the data of an open innovation intermediary. The key finding is that a refinement and elaboration phase and the integration of designers are crucial success factors which, to date, have not been included in the literature...

  7. Basic research in support of innovative fuels design for the Generation IV systems (F-BRIDGE project)

    International Nuclear Information System (INIS)

    Valot, Carole; Bertolus, Marjorie; Konings, Rudy; Somers, Joe; Groot, Sander de

    2010-01-01

    F-BRIDGE (Basic Research in support of Innovative Fuels Design for the GEN IV systems) is a 4-year project which started in 2008. It seeks to bridge the gap between basic research and technological applications for generation IV nuclear reactor systems. One of the challenges for the next generation of reactors is to significantly increase the efficiency in designing innovative fuels. The object of the F-BRIDGE project is to complement the empirical approach by a physically-based description of fuel and cladding materials to enable a rationalization of the design process and a better selection of promising fuel systems. Advanced modelling and separate effects experiments are carried out in order to obtain more exact physical descriptions of ceramic fuels and cladding, at relevant scales from the atomic to the macroscopic scale. Research is also focused on assessing and improving 'sphere-pac' fuel, a composite-ceramics concept which has shown promise. The project activities can be broken down into four main areas: (i) Basic research investigations using a multi-scale approach in both experimentation and modelling to enable the generation of missing basic data, the identification of relevant mechanisms and the development of appropriate models; (ii) Transfer between technological issues and basic research by bringing together within the same project materials scientists, engineers and end-users; (iii) Assessment of the drawbacks and benefits of the sphere-pac fuel application to various Generation IV systems; (iv) Education and training to promote research in the field of fuel materials, to ensure the exchange of results and ideas among the participants and to link the project with other related European or international initiatives. The project relies on the complementary expertise of 19 partners: nuclear and non nuclear research organisations, universities, a nuclear engineering company, as well as technology and project management consultancy small and medium

  8. Social Innovation Europe: Country Summary: Poland. Social Innovation in Poland

    OpenAIRE

    Klimczuk, Andrzej

    2015-01-01

    The history of social innovation in country, challenges being addressed by social innovation. the key actors, who is promoting social innovation. A few of the key projects that illustrate social innovation.

  9. Accelerated Innovation Deployment (AID) Demonstration : KYTC—Roundabout Installation Project in London, Kentucky.

    Science.gov (United States)

    2017-11-01

    This document serves as the final report on the construction and opening of the Roundabout Project in London, Kentucky (Kentucky Item Number 11904.1). This project (hereafter referred to as the London Roundabout) was constructed on the authority o...

  10. 14 CFR 152.105 - Sponsors and planning agencies: Airport planning.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Sponsors and planning agencies: Airport planning. 152.105 Section 152.105 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF....105 Sponsors and planning agencies: Airport planning. (a) To be eligible to apply for a project for...

  11. Developing innovative training protocol for export personnel in the fashion industries through “Extro Skills” project

    Science.gov (United States)

    Ursache, M.; Avădanei, M. L.; Ciobanu, L.; Loghin, M. C.; Ionesi, D. S.; Loghin, E.

    2017-10-01

    The paper presents the objectives, the planned outputs and the innovative aspects of the project entitled “Developing new skills for the extroversion specializations of fashion industry in Europe”, acronym EXTRO SKILLS, which is co-financed by the European Commission under the Erasmus+ Programme, Key Action 2 - Strategic Partnerships. This is a 30 months project and started on December 1-st, 2015. The project aims to bridge the gap between fashion industries and lack of specific expertise and experts of SMEs in these industries. Fashion industries require a more qualified workforce and, therefore, the availability of adequately skilled workers and trained and qualified personnel for their export and fashion marketing departments has become one of the major issues. The new curricula that will be developed in the project will offer essential transversal skills for a quick and qualified response to the international trade and market demands and for enhancing the extroversion and the competitiveness of the fashion industry. The learning content will be tailored to the needs of export and fashion marketing personnel. The constitution of the partnership was based on the cooperation between education and employment in order to better achieve the objectives of the project. The project consortium includes six partners from five countries (Greece, Belgium, Romania, Spain and UK).

  12. Arbejde, innovation og projekter

    DEFF Research Database (Denmark)

    Grex, Sara

    . The objective of the project is to investigate the organizational possibilities for developing ways of organizing so that innovative processes in project-oriented companies can be supported. The problem is answered through a literature review of theories within innovation, project management, and project......This PhD-project is about innovation and project management. It is about the challenges and dilemmas companies and participants in innovative activities experience in relation to generate innovation, but especially the project is about how innovative activities can be organized in project......-oriented organizations. Project organization and project work are forms of organizing and working that becomes more and more widespread with project management as the dominant way of managing. At the same time there is an increased demand and request for more innovation in many companies and organizations. However...

  13. Service Innovation Methodologies II : How can new product development methodologies be applied to service innovation and new service development? : Report no 2 from the TIPVIS-project

    OpenAIRE

    Nysveen, Herbjørn; Pedersen, Per E.; Aas, Tor Helge

    2007-01-01

    This report presents various methodologies used in new product development and product innovation and discusses the relevance of these methodologies for service development and service innovation. The service innovation relevance for all of the methodologies presented is evaluated along several service specific dimensions, like intangibility, inseparability, heterogeneity, perishability, information intensity, and co-creation. The methodologies discussed are mainly collect...

  14. The MERINOVA project: MEteorological RIsks as drivers of environmental inNOvation in Agro-ecosystem management

    Science.gov (United States)

    Gobin, Anne; Van de vijver, Hans; Zamani, Sepideh; Curnel, Yannick; Planchon, Viviane; Verspecht, Ann; Van Huylenbroeck, Guido

    2014-05-01

    Devastating weather-related events have captured the interest of the general public in Belgium. Extreme weather events such as droughts, heat waves and rain storms are projected to increase both in frequency and magnitude with climate change. Since more than half of the Belgian territory is managed by the agricultural sector, extreme events may have significant impacts on agro-ecosystem services and pose severe limitations to sustainable agricultural land management. The research hypothesis of the MERINOVA project is that meteorological risks act as drivers of environmental innovation in agro-ecosystem management. The major objectives are to characterise extreme meteorological events, assess the impact on Belgian agro-ecosystems, characterise their vulnerability and resilience to these events, and explore innovative adaptation options to agricultural risk management. The project comprises of five major parts that reflect the chain of risks: the hazard, its impact on different agro-ecosystems, vulnerability, risk management and risk communication. Impacts developed from physically based models not only provide information on the state of the damage at any given time, but also assist in understanding the links between different factors causing damage and determining bio-physical vulnerability. Socio-economic impacts enlarge the basis for vulnerability mapping, risk management and adaptation options. The perspective of rising risk-exposure is exacerbated further by more limits to aid received for agricultural damage and an overall reduction of direct income support to farmers. The main findings of each of these project building blocks will be communicated. MERINOVA provides for a robust and flexible framework by demonstrating its performance across Belgian agro-ecosystems, and by ensuring its relevance to policy makers and practitioners. A strong expert and end-user network is established to help disseminating and exploiting project results to meet user needs. The

  15. User Innovation Management

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Bertelsen, Pernille

    User Innovation Management (UIM) is a method for fo-opereation with users in innovation projects. The UIM method emphasizes the practice of a participatorty attitude.......User Innovation Management (UIM) is a method for fo-opereation with users in innovation projects. The UIM method emphasizes the practice of a participatorty attitude....

  16. Sponsors' participation in conduct and reporting of industry trials

    DEFF Research Database (Denmark)

    Lundh, Andreas; Krogsbøll, Lasse T; Gøtzsche, Peter C

    2012-01-01

    Bias in industry-sponsored trials is common and the interpretation of the results can be particularly distorted in favour of the sponsor's product. We investigated sponsors' involvement in the conduct and reporting of industry-sponsored trials.......Bias in industry-sponsored trials is common and the interpretation of the results can be particularly distorted in favour of the sponsor's product. We investigated sponsors' involvement in the conduct and reporting of industry-sponsored trials....

  17. Applying the Creativity in Oder to Generate Innovation Projects: the Practical Case Study of a Didactic Strategy

    Directory of Open Access Journals (Sweden)

    Eliana Maria dos Santos Pereira Alves

    2015-08-01

    Full Text Available A current challenge in teaching practice is to transform classrooms into laboratories to exchange experiences in courses whose goal is to enhance the professional skills in a practical and meaningful way. The search for improvement demonstrates that, increasingly, professionals become aware that organizations coexist in highly competitive environments, seeking to conquer more markets based on sustainable competitive advantages demanding fast responses of its employees. Considering that the process of creativity can be stimulated through the establishment of a suitable environment, this study aims to discuss the application of a didactic strategy developed for this purpose. Using the single case study methodology, it was used the technique of unstructured observation (informal or single to carry out the collection and the recording of events that occurred during the strategy application. It discusses elements such as identifying opportunities, creativity, innovation and entrepreneurship, seeking their relationships to understand how it is possible to motivate the generation of proposals for innovative projects in educational environments. As a result, it is presented the perceptions of teachers on the didactic strategy applied, emphasizing that a suitable environment for the development of ideas encourages the student to propose solutions for the improbabilities, creating innovative alternatives to the identified needs.

  18. NASA Innovation Fund 2010 Project Elastically Shaped Future Air Vehicle Concept

    Science.gov (United States)

    Nguyen, Nhan

    2010-01-01

    This report describes a study conducted in 2010 under the NASA Innovation Fund Award to develop innovative future air vehicle concepts. Aerodynamic optimization was performed to produce three different aircraft configuration concepts for low drag, namely drooped wing, inflected wing, and squashed fuselage. A novel wing shaping control concept is introduced. This concept describes a new capability of actively controlling wing shape in-flight to minimize drag. In addition, a novel flight control effector concept is developed to enable wing shaping control. This concept is called a variable camber continuous trailing edge flap that can reduce drag by as much as 50% over a conventional flap. In totality, the potential benefits of fuel savings offered by these concepts can be significant.

  19. Long-Term Assessment of an Innovative Mangrove Rehabilitation Project: Case Study on Carey Island, Malaysia

    OpenAIRE

    Motamedi, Shervin; Hashim, Roslan; Zakaria, Rozainah; Song, Ki-Il; Sofawi, Bakrin

    2014-01-01

    Wave energy and storm surges threaten coastal ecology and nearshore infrastructures. Although coastal structures are conventionally constructed to dampen the wave energy, they introduce tremendous damage to the ecology of the coast. To minimize environmental impact, ecofriendly coastal protection schemes should be introduced. In this paper, we discuss an example of an innovative mangrove rehabilitation attempt to restore the endangered mangroves on Carey Island, Malaysia. A submerged detached...

  20. Increasing capacity for innovation in bureaucratic primary care organizations: a whole system participatory action research project.

    Science.gov (United States)

    Thomas, Paul; McDonnell, Juliet; McCulloch, Janette; While, Alison; Bosanquet, Nick; Ferlie, Ewan

    2005-01-01

    We wanted to identify what organizational features support innovation in Primary Care Groups (PCGs). Our study used a whole system participatory action research model. Four research teams provided complementary insights. Four case study PCGs were analyzed. Two had an intervention to help local facilitators reflect on their work. Data included 70 key informant interviews, observations of clinical governance interventions and committee meetings, analysis of written materials, surveys and telephone interviews of London Primary Care Organizations, interviews with 20 nurses, and interviews with 6 finance directors. A broad range of stakeholders reviewed data at annual conferences and formed conclusions about trustworthy principles. Sequential research phases were refocused in the light of these conclusions and in response to the changing political context. Five features were associated with increased organizational capacity for innovation: (1) clear structures and a vision for corporate and clinical governance; (2) multiple opportunities for people to reflect and learn at all levels of the organization, and connections between these "learning spaces"; (3) both clinicians and managers in leadership roles that encourage participation; (4) the right timing for an initiative and its adaptation to the local context; and (5) external facilitation that provides opportunities for people to make sense of their experiences. Low morale was commonly attributed to 3 features: (1) overwhelming pace of reform, (2) inadequate staff experience and supportive infrastructure, and (3) financial deficits. These features together may support innovation in other primary care bureaucracies. The research methodology enabled people from different backgrounds to make sense of diverse research insights.

  1. An innovative program to fund health-oriented student projects and research.

    Science.gov (United States)

    Bybee, Ronald F; Thompson, Sharon E

    2004-01-01

    The price of a university education has increased over the years. As a result, students often graduate with thousands of dollars of debt. Conducting research or developing class projects that require personal expenditures can be overwhelming, if not impossible. Participation in research and in developing projects can enhance a student's educational experience. In an effort to address cost issues and provide an optimal learning experience for all students through participation in projects and research, the College of Health Sciences at the University of Texas at El Paso (UTEP) collaborated with a regional foundation to fund health-oriented students' projects and research. Approximately 100 projects have been funded in amounts from 200 dollars to 10,000 dollars at UTEP. Similar programs can be replicated at other US universities. Establishing a general fund and identifying contributors may be a viable option, although finding a foundation or agency to fund the project poses a challenge.

  2. Innovation in the management of lessons learned in an IT project with the adoption of social media

    Directory of Open Access Journals (Sweden)

    Roberto Winter

    2017-03-01

    Full Text Available This research explores the gap in the management of lessons learned (MLL in an Information Technology project (IT, validating a model (named Target with the support of a wiki platform in a medium-sized company in the IT industry. This model supports the following MLL processes: awareness, collection, verification, storage, dissemination and reuse. This study adopts the paradigm of the Design Science Research and the Technical Action Research method to instantiate the Target model in the implementation phase of an IT project. The theoretical contribution lies in the practical utility of an LL model, which was validated in the field promoting innovation in the MLL. The practical implications can be seen in the company's learning to introduce the MLL, improve design productivity, increase employee collaboration and better disseminate knowledge.

  3. Performance Assessment of Passive Gaseous Provisions (PGAP). Report of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2013-07-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was launched in 2000 on the basis of IAEA General Conference resolution GC(44)/RES/21. INPRO helps to ensure the availability of sustainable nuclear energy in the 21st century and seeks to bring together all interested Member States - both technology holders and technology users - to consider joint actions to achieve desired innovations. To contribute to an international consensus on the definition of the reliability of passive systems that involve natural circulation, and on a methodology to assess this reliability, INPRO initiated a collaborative project on Performance Assessment of Passive Gaseous Provisions (PGAP) in 2007. Advanced nuclear reactor designs incorporate several passive systems in addition to active ones, not only to enhance the operational safety of the reactors but also to mitigate the consequences of a severe accident should one occur. However, the reliability of passive safety systems is crucial and must be assessed before they are used extensively in future nuclear power plants. Several physical parameters affect the performance of a passive safety system, and their values at the time of operation are a priori unknown. The functions of many passive systems are based on thermohydraulic principles, which until recently were considered as not being subject to any kind of failure. Hence, large and consistent efforts are required to quantify the reliability of such systems. Three participants from three INPRO Member States were involved in this collaborative project. Reliability methods for passive systems (RMPS) and assessment of passive system reliability (APSRA) methodologies were used by the participants to assess the performance and reliability of the passive decay heat removal system of the French gas cooled fast reactor design for station blackout and a loss of coolant accident combined with loss of off-site power, respectively. This publication presents the

  4. Technical difficulties and innovation in the Jiangyin Yangtze River crossing project of 3300 m HDD

    Directory of Open Access Journals (Sweden)

    Wu Yiquan

    2014-10-01

    Full Text Available The Jiangyin Yangtze River Crossing Project sets up a record with the length of horizontal directional drilling (HDD of 3300 m in the world. Inevitably, many technical difficulties might exist in pilot hole docking, reaming torque, property requirement and recovery of drilling fluids, and pullback resistance. Accordingly, some innovative measures were taken in each stage. At the pilot hole drilling stage, a reasonable drill tool assembly was chosen, namely, a new type of Ø 193.7 mm (S-135 drill pipe with high-strength was applied along with the fully guided cable and rotating magnate docking technologies. At the reaming stage, an innovative Ø 168.3 mm (V-150 drill pipe was adopted along with the optimized reamers and the improved hydraulic parameters to successfully reduce the reaming torque and significantly improve the reaming efficiency. At the pullback stage, a specific ground anchor was designed for large-tonnage pullback resistance, and drift pipe, super lubricants and novel glass fiber reinforced plastics were combined for protecting the pipeline coating. Finally, the drilling fluid formula was optimally selected to ensure the hole stability and flowback of drilling cuttings, and a centrifugal was used to recycle the drilling mud to ensure its necessary performance. All these measures not only ensured the success of this HDD project, but also broke many records in this respect.

  5. Status and trends of nuclear technologies - Report of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2009-09-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was launched in the year 2000, based on a resolution by the IAEA General Conference (GC(44)/RES/21). INPRO intends to help to ensure that nuclear energy is available in the 21st century in a sustainable manner, and seeks to bring together all interested Member States, both technology holders and technology users, to consider, jointly, actions to achieve desired innovations. INPRO is taking care of the specific needs of developing countries. This IAEA publication is part of Phase 1 of INPRO. It intends to provide an overview on history, present situation and future perspectives of nuclear fuel cycle technologies. While this overview focuses on technical issues, nevertheless, the aspects of economics, environment, and safety and proliferation resistance are important background issues for this study. After a brief description about the INPRO project and an evaluation of existing and future reactor designs the publication covers nuclear fuel cycle issues in detail. It is expected that this documentation will provide IAEA Member States and their nuclear engineers and designers, as well as policy makers with useful information on status and trends of future nuclear fuel cycle technologies. Due to the size of the full report it was decided to create a summary of the information and attach a CD-ROM in the back of this summary report with the full text of the report

  6. Innovative use of ICT in schools based on the findings in ELFE project

    NARCIS (Netherlands)

    Frederiksson, Ulf; Jedeskog, Gunilla; Plomp, T.

    2008-01-01

    The European e-Learning Forum for Education (ELFE) is a project initiated by the ETUCE (European Trade Union Committee on Education). An important objective of the project has been to study good experiences with implementing the use of ICT in schools. This objective has been broken down in seven

  7. Student International Research Project on Employees' Involvement in Innovation: Experience and Outcomes

    Science.gov (United States)

    Bondarev, Maxim; Zashchitina, Elena; Andreassen, John-Erik

    2016-01-01

    This paper represents the experience and outcomes of a joint education and research project of Østfold University College and Southern Federal University. The project goal is to evolve and strengthen the academic cooperation between the universities by developing joint courses and improving the quality of education via mutual exchange of…

  8. Characteristic Features of Innovation Project Management Aimed at University Human Resource Development

    Science.gov (United States)

    Kalimullin, Aydar M.; Yungblud, Valery T.; Khodyreva, Elena A.

    2016-01-01

    The relevance of the studied issue is based on the need to develop theoretical approaches to project management at a higher educational institution taking into consideration the specifics of the subject area of the projects that ensure finding the "growth points" and addressing the long-term objectives of a university in the field of…

  9. SPONSORING, BRAND VALUE AND SOCIAL MEDIA

    Directory of Open Access Journals (Sweden)

    Alexander Zauner

    2012-10-01

    Full Text Available The increasing involvement of individuals in social media over the past decade has enabled firms to pursue new avenues in communication and sponsoring activities. Besides general research on either social media or sponsoring, questions regarding the consequences of a joint activity (sponsoring activities in social media remain unexplored. Hence, the present study analyses whether the perceived image of the brand and the celebrity endorser credibility of a top sports team influence the perceived brand value of the sponsoring firm in a social media setting. Moreover, these effects are compared between existing customers and non-customers of the sponsoring firm. Interestingly, perceived celebrity endorser credibility plays no role in forming brand value perceptions in the case of the existing customers. Implications for marketing theory and practice are derived.

  10. Paradigma Baru Sponsor sebagai Mitra Penyelenggaraan Event

    Directory of Open Access Journals (Sweden)

    Lidia Evelina

    2011-10-01

    Full Text Available The goals of this article is to know why sponsorship only to be viewed as sources of funding to implement the public relation events or marketing communication events. Method used in this article is qualitative method research to be based on observation, library study and content analysis. The result of this research seems that change happened in role of sponsorship from only fund source to become a partner of cooperation (mutual symbiotism between sponsor and event organizer. This article exploring the change of sponsorship concept from only looking for sponsor as an activity of fund mobilitation to become a partnership cooperation between event organizer and sponsor company. The mean of sponsor itself beside the fund supporter, they are also a side who takes mutual benefit from the cooperation. Conclusion, any close relationship (mutual benefit between two sides who take cooperation in event implementation (sponsor and event organiser. 

  11. Innovative multimedia project – the exemplification of the concept of technological entrepreneurship

    Directory of Open Access Journals (Sweden)

    Badzińska Ewa

    2016-06-01

    Full Text Available The scientific purpose of the study is an attempted synthesis of the concept of technological entrepreneurship. The cognitive aim of the publication is to present the functionality of an innovative technological solution the uses authorial applications and interactive devices designed and commercialized by the analyzed technology start-up. The application of the empirical method of a case study has made it possible to characterize the essence of technological entrepreneurship and illustrate the progress and development of the studied phenomenon in business practice.

  12. Effective Risk Management in Innovative Projects: A Case Study of the Construction of Energy-efficient, Sustainable Building of the Laboratory of Intelligent Building in Cracow

    Science.gov (United States)

    Krechowicz, Maria

    2017-10-01

    Many construction projects fail to meet deadlines or they exceed the assumed budget. This scenario is particularly common in the case of innovative projects, in which too late identification of a high risk of delays and exceeding the assumed costs makes a potentially profitable project untenable. A high risk level, far exceeding the level of risk in standard non-innovative projects, is a characteristic feature of the realization phase of innovative projects. This is associated not only with greater complexity of the design and construction phases, but also with the problems with application of new technologies and prototype solutions, lack of qualified personnel with suitable expertise in specialized areas, and with the ability to properly identify the gaps between available and required knowledge and skills. This paper discusses the process of effective risk management in innovative projects on the example of the realization phase of an innovative, energy-efficient and sustainable building of the Laboratory of Intelligent Building in Cracow - DLJM Lab, from the point of view of DORBUD S.A., its general contractor. In this paper, a new approach to risk management process for innovative construction projects is proposed. Risk management process was divided into five stages: gathering information, identification of the important unwanted events, first risk assessment, development and choice of risk reaction strategies, assessment of the residual risk after introducing risk reactions. 18 unwanted events in an innovative construction project were identified. The first risk assessment was carried out using two-parametric risk matrix, in which the probability of unwanted event occurrence and its consequences were analysed. Three levels of risks were defined: tolerable, controlled and uncontrolled. Risk reactions to each defined unwanted event were developed. The following risk reaction types were considered: risk retention, risk reduction, risk transfer and risk

  13. Modelling semantic emotion space using a 3D hypercube-projection: an innovative analytical approach for the psychology of emotions

    Directory of Open Access Journals (Sweden)

    Radek eTrnka

    2016-04-01

    Full Text Available The widely accepted two-dimensional circumplex model of emotions posits that most instances of human emotional experience can be understood within the two general dimensions of valence and activation. Currently, this model is facing some criticism, because complex emotions in particular are hard to define within only these two general dimensions. The present theory-driven study introduces an innovative analytical approach working in a way other than the conventional, two-dimensional paradigm. The main goal was to map and project semantic emotion space in terms of mutual positions of various emotion prototypical categories. Participants (N = 187; 54.5% females judged 16 discrete emotions in terms of valence, intensity, controllability and utility. The results revealed that these four dimensional input measures were uncorrelated. This implies that valence, intensity, controllability and utility represented clearly different qualities of discrete emotions in the judgments of the participants. Based on this data, we constructed a 3D hypercube-projection and compared it with various two-dimensional projections. This contrasting enabled us to detect several sources of bias when working with the traditional, two-dimensional analytical approach. Contrasting two-dimensional and three-dimensional projections revealed that the 2D models provided biased insights about how emotions are conceptually related to one another along multiple dimensions. The results of the present study point out the reductionist nature of the two-dimensional paradigm in the psychological theory of emotions and challenge the widely accepted circumplex model.

  14. Modeling Semantic Emotion Space Using a 3D Hypercube-Projection: An Innovative Analytical Approach for the Psychology of Emotions.

    Science.gov (United States)

    Trnka, Radek; Lačev, Alek; Balcar, Karel; Kuška, Martin; Tavel, Peter

    2016-01-01

    The widely accepted two-dimensional circumplex model of emotions posits that most instances of human emotional experience can be understood within the two general dimensions of valence and activation. Currently, this model is facing some criticism, because complex emotions in particular are hard to define within only these two general dimensions. The present theory-driven study introduces an innovative analytical approach working in a way other than the conventional, two-dimensional paradigm. The main goal was to map and project semantic emotion space in terms of mutual positions of various emotion prototypical categories. Participants (N = 187; 54.5% females) judged 16 discrete emotions in terms of valence, intensity, controllability and utility. The results revealed that these four dimensional input measures were uncorrelated. This implies that valence, intensity, controllability and utility represented clearly different qualities of discrete emotions in the judgments of the participants. Based on this data, we constructed a 3D hypercube-projection and compared it with various two-dimensional projections. This contrasting enabled us to detect several sources of bias when working with the traditional, two-dimensional analytical approach. Contrasting two-dimensional and three-dimensional projections revealed that the 2D models provided biased insights about how emotions are conceptually related to one another along multiple dimensions. The results of the present study point out the reductionist nature of the two-dimensional paradigm in the psychological theory of emotions and challenge the widely accepted circumplex model.

  15. Final Report, Nuclear Energy Research Initiative (NERI) Project: An Innovative Reactor Analysis Methodology Based on a Quasidiffusion Nodal Core Model

    International Nuclear Information System (INIS)

    Anistratov, Dmitriy Y.; Adams, Marvin L.; Palmer, Todd S.; Smith, Kord S.; Clarno, Kevin; Hikaru Hiruta; Razvan Nes

    2003-01-01

    OAK (B204) Final Report, NERI Project: ''An Innovative Reactor Analysis Methodology Based on a Quasidiffusion Nodal Core Model'' The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations

  16. The Main Tendencies in the Development of Startup Projects as a Form of Innovative-Creative Enterprises in the Ukrainian Computer Programming Market

    Directory of Open Access Journals (Sweden)

    Garafonova Olga I.

    2017-10-01

    Full Text Available The article is aimed at studying the main tendencies in the development of startup projects as a form of innovative-creative enterprises in the Ukrainian computer programming market. A definition of «innovative-creative enterprises» has been proposed, the main features of startups as a form of innovative-creative enterprises has been considered. The directions of development of the computer programming market were analyzed, considering the most significant future trends, products and services in the computer programming sector. An analysis of startups in the Ukrainian computer programming market, based on the volume of investments made, was carried out. A model for the development of startup projects as a form of innovative-creative enterprises has been designed. The unfamiliar promising spheres, wherein have not yet been launched startups in the Ukrainian computer programming market, have been indicated.

  17. CONOCO AND THE VAPOR RECOVERY PROJECT: USING INNOVATION TO PRESERVE AUTONOMY. (R824748)

    Science.gov (United States)

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  18. Innovative Structural and Material Concepts for Low-Weight Low-Drag Aircraft Design Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall technical objective of this multi-phase project is to develop and validate a so-called 'AAW-Process' that consists of (i) the Active Aeroelastic Wing...

  19. Improving patient and project outcomes using interorganisational innovation, collaboration and co-design.

    Science.gov (United States)

    Evans, Liz; Green, Stuart; Howe, Cathy; Sharma, Kiran; Marinho, Fatima; Bell, Derek; Thomas, Paul

    2014-01-01

    Background Common mental disorders (CMDs) are a leading cause of disability. The Department of Health has launched a large-scale initiative to improve access to evidence-based psychological treatments, such as cognitive behavioural therapy (CBT), through the Improving Access to Psychological Therapy (IAPT) programme. Access to IAPT services by black and minority ethnic (BME) communities is lower than for other groups. Setting The London Borough of Ealing in west London; a diverse borough with areas of high BME population and relatively high deprivation. Aim To compare the outcomes of two linked quality improvement (QI) projects undertaken by Ealing Mental Health and Wellbeing Service (MHWBS), both with the same aim of increasing access to talking therapies for BME communities. Methods Application of QI methodologies supported by the NIHR CLAHRC for northwest London in two different settings in Ealing. One, the 'Southall project', was set within a wider initiative for collaborative improvements and shared learning (the Southall Initiative for Integrated Care) in an ethnically diverse area of Ealing; it was undertaken between April 2010 and September 2011. The second, 'the Ealing project', operated in the two other Ealing localities that did not have the advantage of a broader initiative for collaborative improvements; it was undertaken between April 2011 and September 2012. Results Comparison of the monthly referral rates of BME patients (standardised per 10 000 general practitioner (GP)-registered patients) show that the Southall project was more effective in increasing referrals from BME communities than the Ealing project. Conclusion Broad local participation and ownership in the project design of the Southall project may explain why it was more effective in achieving its aims than the Ealing project which lacked these ownership-creating mechanisms.

  20. Interaction of science, business and state in the sphere of innovative projects development: comparative analysis by the example of Russia, USA and China

    Directory of Open Access Journals (Sweden)

    Elena V. Kamko

    2017-09-01

    Full Text Available Objective to study the organizational principles of institutional mechanisms in innovation sphere which are capable of maintaining and developing the interaction of science state and business. Methods general scientific principles of economic phenomena cognition such as dialectical structural historical approaches which allowed us to evaluate the institutional structures and mechanisms to reveal their inherent qualities and structure and to identify trends in their historical and future development. The specificity of the institutions which characterizes the individual companies was considered on the basis of comparative institutional analysis drawing on the institutional concept of the X and Yeconomies. Justification of the practical conclusions was made on the basis of theoretical analysis and generalization of the actual historical examples of innovative breakthroughs both in Russia and abroad. Results institutional characteristics of interaction between science state and business in Russia USA and China were analyzed. Investigation of the projects associated with innovation breakthroughs innovation center quotSkolkovoquot Russia Silicon Valley USA and Technopark quotZhongguancunquot China revealed the specificity and established causeandeffect relations in the formation of institutional mechanisms that are present in their implementation. As a result it was determined that the effectiveness of institutional mechanisms for the innovative projects implementation is connected with such combination of the implemented institutions which reflects the dominant position of the institutional matrix of the society in which these projects are implemented. Scientific novelty for the first time on the basis of the institutional concepts of the X and Yeconomies the causeandeffect relations in the formation of institutional mechanisms for innovative areas in different countries were investigated. Practical significance the results and conclusions of the

  1. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Human Exploration and Operations Mission Directorate Projects for 2016

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2017-01-01

    This report is intended to help NASA program and project managers incorporate Small Business Innovation Research Small Business Technology Transfer (SBIR/STTR) technologies into NASA Human Exploration and Operations Mission Directorate (HEOMD) projects. Other Government and commercial projects managers can also find this useful. Space Transportation; Life Support and Habitation Systems; Extra-Vehicular Activity; High EfficiencySpace Power; Human Exploration and Operations Mission,

  2. Small Project Rapid Integration and Test Environment (SPRITE) An Innovation Space for Small Projects Design, Development, Integration, and Test

    Science.gov (United States)

    Lee, Ashley; Rackoczy, John; Heater, Daniel; Sanders, Devon; Tashakkor, Scott

    2013-01-01

    Over the past few years interest in the development and use of small satellites has rapidly gained momentum with universities, commercial, and government organizations. In a few years we may see networked clusters of dozens or even hundreds of small, cheap, easily replaceable satellites working together in place of the large, expensive and difficult-to-replace satellites now in orbit. Standards based satellite buses and deployment mechanisms, such as the CubeSat and Poly Pico-satellite Orbital Deployer (P-POD), have stimulated growth in this area. The use of small satellites is also proving to be a cost effective capability in many areas traditionally dominated by large satellites, though many challenges remain. Currently many of these small satellites undergo very little testing prior to flight. As these small satellites move from technology demonstration and student projects toward more complex operational assets, it is expected that the standards for verification and validation will increase.

  3. List of Organizing Committees and Sponsors

    Science.gov (United States)

    2012-03-01

    Organizers DIRECTORS Maria L CalvoPresident of International Commission for Optics, Spain Aram V PapoyanDirector of Institute for Physical Research of NAS, Armenia HEADS OF PROJECT Tigran Dadalyan YSU, Armenia Artsrun MartirosyanIPR, Armenia COORDINATOR Narine GevorgyanIPR, Armenia / ICTP, Italy MANAGERS Paytsar MantashyanIPR, Armenia Karen VardanyanIPR, Armenia INTERNATIONAL ADVISORY COMMITTEE Marcis AuzinshLatvia Roland AvagyanArmenia Tapash ChakrabortyCanada Yuri ChilingaryanArmenia Eduard KazaryanArmenia Albert KirakosyanArmenia Radik KostanyanArmenia Avinash PandeyIndia Marat SoskinUkraine INTERNATIONAL PROGRAM COMMITTEE David Sarkisyan (Chair)Armenia Roman AlaverdyanArmenia Dan ApostolRomania Levon AslanyanArmenia Aranya BhattacherjeeIndia Gagik BuniatyanArmenia Vigen ChaltykyanArmenia Roldao Da RochaBrazil Miltcho DanailovItaly Vladimir GerdtRussia Samvel GevorgyanArmenia Gayane GrigoryanArmenia Rafik HakobyanArmenia Takayuki MiyaderaJapan Levon MouradianArmenia Atom MuradyanArmenia Simon RochesterUSA Hayk SarkisyanArmenia Aleksandr VardanyanArmenia LOCAL ORGANIZING COMMITTEE Narek AghekyanArmenia Anahit GogyanArmenia Melanya GrigoryanArmenia Armen HovhannisyanArmenia Lilit HovhannisyanArmenia Tatevik KhachatryanArmenia Astghik KuzanyanArmenia Satenik KuzanyanArmenia Vladimir LazarevRussia Lilit MantashyanArmenia Hripsime MkrtchyanArmenia Pavel MuzhikyanArmenia Wahi NarsisianArmenia Sahak OrdukhanyanArmenia Anna ReymersArmenia Narine TorosyanArmenia The Symposium was organized by YSU & NAS SPIE Armenian Student Chapter Institute for Physical Research (IPR) of National Academy of Sciences (NAS) Russian-Armenian (Slavonic) University (RAU) LT-PYRKAL cjsc Yerevan State University (YSU) Official Sponsors of the Symposium LT-PYRKAlRussian ArmenianSPIE LT-PYRKAL cjscRussian-Armenian UniversityYSU & NAS SPIE Student Chapter Further sponsors NFSATICTPSCSADevout Generation National Foundation of Science and Advanced TechnologiesThe Abdus Salam International Centre

  4. What knowledge counts? Insights from an action research project using participatory video with grassroots innovation experiences

    Energy Technology Data Exchange (ETDEWEB)

    Boni, A.; Leivas, M.; Talon, A.; De La Fuente, T.; Pellicer-Sifres, V.; Belda-Miquel, S.; Lopez-Fogues, A.; Arias, B

    2016-07-01

    This paper presents a contribution on a participatory action-research process using Participatory Video (PV) methodology. Duringsix months, a group of 6 facilitators and 9 members of two grassroots innovation initiatives (Solar Dómada and Fuel Poverty Group) took part of the process and produced two videos during a five-st age PV process, from initial definition and planning to public screening and debate of the videos. We present some insightrs from that research using an original framework developed to analyze PV process: the eParc Cube. This framework examines the interaction between knowledge production, participation and communicative spaces that happen during PV. We conclude reflecting on the social relevance of that kind of research considering the impact among of the coresearchers of both process and products. (Author)

  5. Observatory Sponsoring Astronomical Image Contest

    Science.gov (United States)

    2005-05-01

    Forget the headphones you saw in the Warner Brothers thriller Contact, as well as the guttural throbs emanating from loudspeakers at the Very Large Array in that 1997 movie. In real life, radio telescopes aren't used for "listening" to anything - just like visible-light telescopes, they are used primarily to make images of astronomical objects. Now, the National Radio Astronomy Observatory (NRAO) wants to encourage astronomers to use radio-telescope data to make truly compelling images, and is offering cash prizes to winners of a new image contest. Radio Galaxy Fornax A Radio Galaxy Fornax A Radio-optical composite image of giant elliptical galaxy NGC 1316, showing the galaxy (center), a smaller companion galaxy being cannibalized by NGC 1316, and the resulting "lobes" (orange) of radio emission caused by jets of particles spewed from the core of the giant galaxy Click on image for more detail and images CREDIT: Fomalont et al., NRAO/AUI/NSF "Astronomy is a very visual science, and our radio telescopes are capable of producing excellent images. We're sponsoring this contest to encourage astronomers to make the extra effort to turn good images into truly spectacular ones," said NRAO Director Fred K.Y. Lo. The contest, offering a grand prize of $1,000, was announced at the American Astronomical Society's meeting in Minneapolis, Minnesota. The image contest is part of a broader NRAO effort to make radio astronomical data and images easily accessible and widely available to scientists, students, teachers, the general public, news media and science-education professionals. That effort includes an expanded image gallery on the observatory's Web site. "We're not only adding new radio-astronomy images to our online gallery, but we're also improving the organization and accessibility of the images," said Mark Adams, head of education and public outreach (EPO) at NRAO. "Our long-term goal is to make the NRAO Image Gallery an international resource for radio astronomy imagery

  6. A Novel Approach for Engaging Academia in Collaborative Projects with NASA through the X-Hab Academic Innovation Challenge

    Science.gov (United States)

    Gill, Tracy R.; Gattuso, Kelly J.

    2015-01-01

    The X-Hab Academic Innovation Challenge, currently in its sixth year of execution, provides university students with the opportunity to be on the forefront of innovation. The X-Hab Challenge, for short, is designed to engage and retain students in Science, Technology, Engineering and Math (STEM). NASA identifies necessary technologies and studies for deep space missions and invites universities from around the country to develop concepts, prototypes, and lessons learned that will help shape future space missions and awards seed funds to design and produce functional products of interest as proposed by university teams according to their interests and expertise. Universities propose on a variety of projects suggested by NASA and are then judged on technical merit, academic integration, leveraged funding, and outreach. The universities assemble a multi-discipline team of students and advisors that invest months working together, developing concepts, and frequently producing working prototypes. Not only are students able to gain quality experience, working real world problems that have the possibility of be implemented, but they work closely with subject matter experts from NASA who guide them through an official engineering development process.

  7. Experiment Study on Elastic Indicator of Thermal Shock Ceramic Materials——Implementation of Students’ Innovative Research Project of Shandong University of Science and Technology

    Directory of Open Access Journals (Sweden)

    Wang Yanxia

    2017-01-01

    Full Text Available In order to improve the quality of undergraduate education and combine theory and practice, Shandong University of science and technology organized innovative research activities project for undergraduates. Combined with the characteristics of engineering mechanics course, teachers of engineering mechanics teaching and research section guided students to take an active part in scientific research and innovation practice teaching, which has obtained a good teaching effect. This paper introduces the concrete implement process of the college students’ innovative scientific research project “Experiment Study on Elastic Indicator of Thermal Shock Ceramic Materials”, which measures elastic indicator of ceramics using the ultrasonic method. This paper studies elastic indicator change rule of the mullite ceramic samples under different factors such as temperature difference, thermal shock times and so on. Studies have shown that in the condition of air-cooling, with the increase of thermal shock temperature difference and thermal shock times, the elastic modulus value, shear modulus and Poisson’s ratio are in a falling trend. The project implementation have proved that implement undergraduate innovation research projects could effectively arouse students’ learning enthusiasm, cultivate students’ scientific research innovation and analytical abilities to solve practical scientific research problems.

  8. Formalization of the Problems of Marketing in Managing the Implementation of Industrial Innovation Projects

    Directory of Open Access Journals (Sweden)

    Aleksandr Kalikh

    2014-10-01

    Full Text Available The article, basing on statistical datas from Data Mining Cup (www.dataminingcup.de and described the algotithm for data analysis of coinnovation projects. This algorithm can help to find a decision for modernisation of products groups’ production and plane future modernisation of manufacture adapted for product lines.

  9. Sources of innovation, their combinations and strengths - benefits at the NPD project level

    DEFF Research Database (Denmark)

    Tranekjer, Tina Lundø; Søndergaard, Helle Alsted

    2013-01-01

    and science sources is related to decreased costs. Additionally, if firms are looking for increased market performance, they should aim at collaborating with suppliers that have a similar knowledge base, whereas if the aim is lower project costs, collaboration with a customer with a similar knowledge base...

  10. Planning-in-Action: An Innovative Approach to Human Development. The Hunger Project.

    Science.gov (United States)

    Community Development Journal, 1991

    1991-01-01

    The Hunger Project in India used a strategic planning-in-action approach that involved (1) reaching a common understanding; (2) creating a strategic intent; (3) choosing social indicators; (4) identifying strategic objectives; (5) empowering leadership; (6) identifying immediate action steps; and (7) sustaining the action. (SK)

  11. Innovative Experiential Learning Activities in Aging: The Experiences of Four BEL Projects

    Science.gov (United States)

    Hash, Kristina M.; Poole, Jay; Floyd, Melissa; Moore, Crystal Dea; Rogers, Anissa T.; Tower, Leslie E.

    2017-01-01

    The BSW Experiential Learning (BEL) Program aims to infuse intergenerational content into the curriculum and recruit students to the field of social work by implementing face-to-face learning opportunities with older adults. This article discusses and compares the experiences of 4 diverse BEL projects that implemented gero-experiential learning…

  12. Disruptive Innovation? Open Educational Projects Peer 2 Peer University and StraighterLine Take Shape

    Science.gov (United States)

    Observatory on Borderless Higher Education, 2010

    2010-01-01

    The pilot phase of Peer 2 Peer University (P2PU), a "grassroots" open educational project aimed at creating a new model for lifelong learning is now underway. Billing itself as an institution which promotes "learning for everyone, by everyone, about almost anything", P2PU is seeking to provide high-quality, low-cost educational opportunities by…

  13. From Concept to Commercialisation: Student Learning in a Sustainable Engineering Innovation Project

    Science.gov (United States)

    Schafer, Andrea I.; Richards, Bryce S.

    2007-01-01

    An interdisciplinary sustainable design project that combines membrane technology with renewable energy to provide water for remote communities and developing countries was offered to students for voluntary participation. Through continuous design stages and improvements on several prototypes, laboratory testing and several field trials in…

  14. Innovative financing techniques for nuclear power exports

    International Nuclear Information System (INIS)

    Mercaldo, E.L.

    1983-06-01

    The author makes general comments regarding the possible conflict between project risks, sponsors' ability to assume these risks, and the requirements and objectives of all project benficiaries: sponsors, lenders, consumers and government. To reconcile these conflicts there is an increasing use of project finance techniques to finance large capital projects

  15. DISCUSSION OF SOME CRITERIA OF FINANCIAL EVALUATION IN THE DECISION OF INNOVATION PROJECTS IN PROCESSES

    Directory of Open Access Journals (Sweden)

    Jair Sbaraini

    2014-06-01

    Full Text Available One of the greatest challenges for small companies is to administer scarce resources, because, they represent the means by which companies accomplish their operations. These resources - materials, financial, human, administrative or of market - managed in a harmonious way, are responsible for maintaining the competitiveness level of the company. Besides the proper administration of their resources, innovation is extremely important in the context of maintaining and improving the competitive advantages of these companies. Nowadays with the speed of information, lots of ideas appear in the companies intending to improve processes, increase productivity, and reduce costs, among other proposals. However a small portion of these ideas have effective implementation potential and do not reach their goals. The higher the assertiveness the better is the result. As there is a great dispute of resources in the companies, it is necessary to decide appropriately which ideas have better chance for obtaining success, and, for such, it is very important to properly quantify the financial return.

  16. Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

    Directory of Open Access Journals (Sweden)

    Anubhav Jain

    2013-07-01

    Full Text Available Accelerating the discovery of advanced materials is essential for human welfare and sustainable, clean energy. In this paper, we introduce the Materials Project (www.materialsproject.org, a core program of the Materials Genome Initiative that uses high-throughput computing to uncover the properties of all known inorganic materials. This open dataset can be accessed through multiple channels for both interactive exploration and data mining. The Materials Project also seeks to create open-source platforms for developing robust, sophisticated materials analyses. Future efforts will enable users to perform ‘‘rapid-prototyping’’ of new materials in silico, and provide researchers with new avenues for cost-effective, data-driven materials design.

  17. Super simple experiments with light and color fun and innovative science projects

    CERN Document Server

    Polinsky, Paige V

    2016-01-01

    Super Simple Experiments with Light and Colorgives young readers the tools they need to start experimenting.Budding scientists will learn to bend laser beams, create rainbows, and more! Each project has easy‑to‑read directions paired with step‑by‑step photographs, while colorful graphics describe the super science at work.Aligned to Common Core Standards and correlated to state standards. Applied to STEM Concepts of Learning Principles. Super Sandcastle is an imprint of Abdo Publishing, a division of ABDO.

  18. Best practice guidelines for stroke in Cameroon: An innovative and participatory knowledge translation project

    Directory of Open Access Journals (Sweden)

    Lynn Cockburn

    2014-11-01

    Objectives: The purpose of this article is to describe how a group of front-line practitioners collaborated with academics and students to develop best practice guidelines (BPG for the management and rehabilitation of stroke in adult patients in Cameroon. Method: A working group was established and adapted internationally recognised processes for the development of best practice guidelines. The group determined the scope of the guidelines, documented current practices, and critically appraised evidence to develop guidelines relevant to the Cameroon context. Results: The primary result of this project is best practice guidelines which provided an overview of the provision of stroke rehabilitation services in the region, and made 83 practice recommendations to improve these services. We also report on the successes and challenges encountered during the process, and the working group’s recommendations aimed at encouraging others to consider similar projects. Conclusion: This project demonstrated that there is interest and capacity for improving stroke rehabilitation practices and for stroke guideline development in Africa.

  19. Best practice guidelines for stroke in Cameroon: An innovative and participatory knowledge translation project

    Directory of Open Access Journals (Sweden)

    Lynn Cockburn

    2014-04-01

    Full Text Available Background: Although the adherence to stroke guidelines in high-income countries has been shown to be associated with improved patient outcomes, the research, development and implementation of rehabilitation related guidelines in African countries is lacking.Objectives: The purpose of this article is to describe how a group of front-line practitioners collaborated with academics and students to develop best practice guidelines (BPG for the management and rehabilitation of stroke in adult patients in Cameroon.Method: A working group was established and adapted internationally recognised processes for the development of best practice guidelines. The group determined the scope of the guidelines, documented current practices, and critically appraised evidence to develop guidelines relevant to the Cameroon context.Results: The primary result of this project is best practice guidelines which provided an overview of the provision of stroke rehabilitation services in the region, and made 83 practice recommendations to improve these services. We also report on the successes and challenges encountered during the process, and the working group’s recommendations aimed at encouraging others to consider similar projects.Conclusion: This project demonstrated that there is interest and capacity for improving stroke rehabilitation practices and for stroke guideline development in Africa.

  20. INVOLVING OLDER PEOPLE IN THE DESIGN OF AN INNOVATIVE INFORMATION AND COMMUNICATION TECHNOLOGIES SYSTEM PROMOTING ACTIVE AGING: THE SAAPHO PROJECT

    Directory of Open Access Journals (Sweden)

    Sara Domenech

    2013-05-01

    Full Text Available Active Ageing refers to the optimization process in health, social engagement, and security opportunities as people age. The demand to introduce technology to improve older people’s quality of life is progressively increasing. SAAPHO project, a project based on this framework, is described in this article. The objective of the SAAPHO project is to support Active Aging by assisting older people to participate in society preserving their independence and dignity through the application of innovative ICT-based solutions. This three-year project aims to develop a system focused on boosting accessibility to a diverse number of health, participation and security services by means of easy-to-use and easy-to-configure interfaces. Involving older people through participatory design enhances product´s usability and accessibility.  Thus, in order to design the system, and reach end user‘s needs and preferences, questionnaires and focus groups were run in Spain and Slovenia, the two pilot testing sites, during the product design early stages. After completing the first year prototype, controlled sessions, using the SAAPHO platform, were performed with older people in both countries to study its usability. Hence, this article presents the general results of older people participation in the design of SAAPHO system after completing the first year prototype. The ultimate goal of SAAPHO is to create a usable system that covers the health, safety and social needs of end-users taking into account their preferences in the design of the behaviour and architecture of the system.

  1. Innovative and adaptive technologies in decommissioning of nuclear facilities. Final report of a coordinated research project 2004-2008

    International Nuclear Information System (INIS)

    2008-10-01

    There are dozens of old reactors and other nuclear facilities worldwide that are either being actively dismantled or are candidates for decommissioning in the near term. A significant proportion of these facilities are situated in Member States or institutions that do not have adequate expertise and technologies for planning and implementing state of the art decommissioning projects. The technology selection process is critical in that regard. The main objective of the IAEA technical activities on decommissioning is to promote the exchange of lessons learned in order to improve the technologies, thereby contributing to successful planning and implementation of decommissioning. This should be achieved through a better understanding of the decision making process in technology comparison and selection and relevant issues affecting the entire decommissioning process. The specific objectives of the Coordinated Research Project (CRP) on Innovative and Adaptive Technologies in Decommissioning of Nuclear Facilities include the following general aspects: (a) To establish methodologies and data needs for developing concepts and approaches relevant to technology comparison and selection in decommissioning; (b) To improve and expand the database on applications and performance of various types of decommissioning technologies; (c) To address specific issues for individual decommissioning technologies and generate data relevant to their comparison and selection. It is also expected that this project, and in particular the papers collected in this TECDOC, will draw Member States' attention to the practicality and achievability of timely planning and implementation of decommissioning, especially for many smaller projects. Concluding reports that summarized the work undertaken under the aegis of the CRP were presented at the third and final research coordination meeting held in Rez, Czech Republic, 3-7 December 2007, and collected in this technical publication. Operating

  2. The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO): General description and implications for the research reactor infrastructure needed for R and D

    International Nuclear Information System (INIS)

    Sokolov, Yury A.

    2005-01-01

    The substantial growth in 21st century energy supplies needed to meet sustainable development goals has been emphasized by UNCSD, WSSD, IPCC and others. This will be driven by continuing population growth, economic development and aspiration to provide access to modern energy systems to the 1,6 billion people now without such access, the growth demand on limiting greenhouse gas emissions, and reducing the risk of climate change. A key factor to the future of nuclear power is the degree to which innovative nuclear technologies can be developed to meet challenges of economic competitiveness, safety, waste and proliferation concerns. There are two major international initiatives in the area of innovative nuclear technology: the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycle (INPRO) and the Generation IV International Forum. With INPRO some scenarios of future energy needs were identified and the methodology for holistic assessment of the innovative nuclear energy systems (INS), which can be developed to meet these scenarios, was developed.. The current status of the INPRO project and details of the INPRO methodology will be reported. The research needs identified due to Agency's activities on innovative nuclear system development assume the use of research reactors. The areas crucial for the development of INS which critically dependent of the RR experiments and following requirements addressed to the RR will be discussed. These areas include the development of advanced fuel and core materials for proposed innovative power reactor concepts. (author)

  3. Super simple experiments with heat and cold fun and innovative science projects

    CERN Document Server

    Polinsky, Paige V

    2016-01-01

    Super Simple Experiments with Heat and Cold gives young readers the tools they need to start experimenting.Budding scientists will learn to build a working thermometer, create a cloud, and more! Each project has easy‑to‑read directions paired with step‑by‑step photographs, while colorful graphics describe the super science at work.Aligned to Common Core Standards and correlated to state standards. Applied to STEM Concepts of Learning Principles. Super Sandcastle is an imprint of Abdo Publishing, a division of ABDO.

  4. The Idea of an Innovated Concept of the Košice Geothermal Project

    Directory of Open Access Journals (Sweden)

    Bujanská Alena

    2015-11-01

    Full Text Available Slovakia has very limited amounts of fossil resources. However, it has a relatively high potential of geothermal energy which use is far below its possibilities. The most abundant geothermal resource, not only in Slovakia but throughout the central Europe, is Košice basin. Since the publication of the first ideas about the ambitious goal to exploit the geothermal potential of this site, 20 years has passed and three geothermal wells has been made but without any progress. In the article the authors present the idea of a fundamental change in the approach to improve the energy and economic efficiency of the project.

  5. Projection-based Bayesian recursive estimation of ARX model with uniform innovations

    Czech Academy of Sciences Publication Activity Database

    Kárný, Miroslav; Pavelková, Lenka

    2007-01-01

    Roč. 56, 9/10 (2007), s. 646-655 ISSN 0167-6911 R&D Projects: GA AV ČR 1ET100750401; GA MŠk 2C06001; GA MDS 1F43A/003/120 Institutional research plan: CEZ:AV0Z10750506 Keywords : ARX model * Bayesian recursive estimation * Uniform distribution Subject RIV: BC - Control Systems Theory Impact factor: 1.634, year: 2007 http://dx.doi.org/10.1016/j.sysconle.2007.03.005

  6. Scenario-based approach adopted in the ELECTRA project for deriving innovative control room functionality

    DEFF Research Database (Denmark)

    Marinelli, Mattia; Heussen, Kai; Prostejovsky, Alexander Maria

    2017-01-01

    Here, the authors analyse the operator point of view of the Web-of-Cells concept defined in the EU project ELECTRA, by identifying operator tasks into the supervision of a highly automated power system, and the information requirements to facilitate appropriate operator situation awareness....... The study outlines the methodology adopted, which is based on the cognitive work analysis framework, to provide an overview of the most interesting scenarios and to summarise the requirements analysis results. In order to derive required control room functionality, a set of relevant control room scenarios...

  7. Innovation in Health Policy Education: Project-Based Service Learning at a Distance for Graduate Midwifery Students.

    Science.gov (United States)

    Van Hoover, Cheri

    2015-01-01

    Core competencies for midwifery practice include an understanding of systems of health care delivery and advocacy for legislation and policy initiatives that promote quality in health care. Today's rapidly changing health care environment, due in part to the implementation of the Patient Protection and Affordable Care Act, mandates that midwives possess greater literacy in health policy and comfort with political action than ever before. Frequently disinterested in politics and intimidated by the policymaking process, student midwives lack the foundational knowledge and practical skills needed to meet this professional obligation. The Midwifery Institute of Philadelphia University graduate program educates both student nurse-midwives and student midwives in health policy using an innovative, project-based service-learning approach featuring real-world collaborative experiences. This novel teaching style is ideally suited for instruction at a distance because of the diversity of experience brought to the virtual classroom by students in widely disparate geopolitical locations. As students accomplish measurable objectives within their individually developed projects and reflect with classmates about their experiences, they feel empowered to effect change and report lower perceived barriers to future political engagement. © 2015 by the American College of Nurse-Midwives.

  8. City/industry/utility partnership leads to innovative combined heat and power project

    Energy Technology Data Exchange (ETDEWEB)

    Savage, J. [Savage and Associates, Quesnel, BC (Canada)

    2010-07-01

    This presentation discussed a combined heat and power (CHP) project that was launched in Quesnel, British Columbia. The CHP is being developed in phases in which new components will enter the system, providing added benefits. Hot oil from a sawmill bioenergy system will be used to heat lumber kilns, generate electricity at an Organic Rankine Cycle co-generation plant, and heat water for a District Energy Loop (DEL) to heat up to 22 existing buildings in the city as well as sawmill and planer buildings. The DEL piping would comprise a 5 kilometre loop. The energy would come from recovered sawmill space heating, recovered stack energy, and additional biomass energy. All of the district heating and 41 per cent of the power would be from heat recovered from the existing industrial operation. This bio-economy vision ultimately involves incorporating a biogas digester into the system to process food, regional organic waste, and pulp mill residuals, relying on bio-solids and heat from the mill. The fertilizer from the digester would then be used in a biomass plantation, which would provide materials to industry for many products, including bio-refining. This project evolved in response to concerns about the ecological effects and long-term economics of aggressive utilization of forest biomass. 15 figs.

  9. On integration and innovation of sino-foreign safety culture in Haiyang AP1000 Project

    International Nuclear Information System (INIS)

    Li Ruipu; Song Fengwei

    2010-01-01

    The undergoing Haiyang Nuclear Power Plant is not only introducing the top-advanced AP1000 nuclear technology, but also the mature HSE management system from U.S.A. It's very important for both sides to communicate, comprehend and acculturation of both different culture. After over 1 year discussion and practice, the experts of Westinghouse Consortium and Chinese HSE engineers have established an distinctive safety culture of AP1000 Project initially, demonstrating the followings: Exemplary actions of the expat experts and the SNPTC leaders, the high level standard HSE procedures, HSE audit, various training, HSE inspection all-around, the safety performance assessment for prospective index, JHA/JSA , emergency system, humanism rewards and punishment etc.. Haiyang SPMO has made Three-Step master plan for AP1000 project HSE Routine by analysis the site problems and the difference between Chinese and American, that is, from 2008 to 2020, when nuclear power achieve to independent, safety culture of Haiyang AP1000 will change from 'dependent' to 'independent', until the last 'interdependent'. (authors)

  10. Transforming the Roles of a Public Extension Agency to Strengthen Innovation: Lessons from the National Agricultural Extension Project in Bangladesh

    NARCIS (Netherlands)

    Chowdhury, A.H.; Odame, H.H.; Leeuwis, C.

    2014-01-01

    Purpose: The rapidly evolving nature of agricultural innovation processes in low-income countries requires agricultural extension agencies to transform the classical roles that previously supported linear information dissemination and adoption of innovation. In Bangladesh, strengthening agricultural

  11. International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). 2011 Progress Report. Enhancing Global Nuclear Energy Sustainability

    International Nuclear Information System (INIS)

    2012-05-01

    When INPRO was established in 2000, some key characteristics and main objectives for the project were determined and remain basically unchanged to this day: to help ensure that nuclear energy is available to contribute to satisfying energy needs in the 21st century in a sustainable manner and to bring together technology holders, technology users and other stakeholders to consider jointly the national and international actions required to achieve desired innovations in nuclear reactors and fuel cycles. I wish to use the occasion of this INPRO Progress Report to review some of the key highlights of the past year and share with you my views and vision of INPRO's future. The ''Great East Japan Earthquake and Tsunami'' and the resulting accident at TEPCO's Fukushima Daiichi nuclear power plant occurred on 11 March 2011. In response to this accident and at the request of its Member States, the IAEA drafted an Action Plan which defines a programme of work o strengthen the global nuclear safety framework. The activities proposed in the Action Plan are meant to be implemented in the near term, to assess the safety of operating nuclear power plants n the light of lessons learned from the Fukushima Daiichi accident. The assessment covers both technical elements, specifically the design of nuclear power plants with regard to site specific extreme natural hazards, and institutional elements, such as the effectiveness of regulatory bodies, operating organizations and the international legal framework in regard to the implementation of IAEA Safety tandards and Conventions. The lessons learned in the medium and long terms will also be reflected n a periodic update of the design requirements for nuclear power plants, international safety tandards, regulations issued by national supervisory authorities, operational procedures, emergency planning and safety assessment methodologies. INPRO has a long term perspective and provides an assessment of the whole nuclear system. Ensuring

  12. ISS National Laboratory Education Project: Enhancing and Innovating the ISS as an Educational Venue

    Science.gov (United States)

    Melvin, Leland D.

    2011-01-01

    The vision is to develop the ISS National Laboratory Education Project (ISS NLE) as a national resource for Science, Technology, Engineering and Mathematics (STEM) education, utilizing the unique educational venue of the International Space Station per the NASA Congressional Authorization Act of 2005. The ISS NLE will serve as an educational resource which enables educational activities onboard the ISS and in the classroom. The ISS NLE will be accessible to educators and students from kindergarten to post-doctoral studies, at primary and secondary schools, colleges and universities. Additionally, the ISS NLE will provide ISS-related STEM education opportunities and resources for learners of all ages via informal educational institutions and venues Though U.S. Congressional direction emphasized the involvement of U.S. students, many ISS-based educational activities have international student and educator participation Over 31 million students around the world have participated in several ISS-related education activities.

  13. Edutainment, cultural innovation and social inclusion. Fort360, a project for cultural heritage enhancement

    Directory of Open Access Journals (Sweden)

    Paolo Di Pietro Martinelli

    2016-12-01

    Full Text Available   Fort360 project is a cultural initiative that receives the main directives of edutainment processes, trying to provide an answer to the necessity of a capillary system of information and awareness about the dismissing cultural heritage. The proposed study – carried out in the Fort Bravetta, Rome – presents a video where the educational aspect, related to the historical and architectural site contents, is strictly connected with the playful and emotional quality, resulted from a VR interaction with a panoramic video. This first case study focuses on the use of low-cost digital instrumentation and tries to improve the value of culture from the bottom, proposing an alternative way of cultural heritage enjoyment, based on participation and on interdisciplinarity of the proposed contents.

  14. Transforming the Roles of a Public Extension Agency to Strengthen Innovation: Lessons from the National Agricultural Extension Project in Bangladesh

    Science.gov (United States)

    Chowdhury, Ataharul Huq; Odame, Helen Hambly; Leeuwis, Cees

    2014-01-01

    Purpose: The rapidly evolving nature of agricultural innovation processes in low-income countries requires agricultural extension agencies to transform the classical roles that previously supported linear information dissemination and adoption of innovation. In Bangladesh, strengthening agricultural innovation calls for facilitation of interactive…

  15. European Symposium for the Evaluation of Innovative Projects To Integrate Disadvantaged Young People into Work (Trier, Germany, March 10-13, 1993).

    Science.gov (United States)

    Chome, Gesa, Ed.

    1993-01-01

    Some 180 experts from 10 European countries met at the University of Trier (Germany) to exchange information about youth assistance projects and hear views about the extent of unemployment among disadvantaged youth and development of innovative solutions. "The Failure of Young People to Cope with Life When Unemployed" (Bohnisch) showed…

  16. A European union (EU) co-operation program: Integral, innovative, industrial product design and development, I3PD(2) and project led education (PLE)

    DEFF Research Database (Denmark)

    Nielsen, Sven Hvid

    2007-01-01

    Aalborg University's project-organised and problem-oriented studies were introduced Thirty-three years ago. The experience since then has proved this to be an important innovation in higher education. The primary aim is to teach young people, students to become useful members for industry...... development, teachers mobility, exchange of students and industrial co-operation....

  17. Design of a quality and performance improvement project for small primary care practices: reflections on the Center for Practice Innovation.

    Science.gov (United States)

    Marsteller, Jill A; Woodward, Paula; Underwood, William S; Hsiao, Chun-Ju; Barr, Michael S

    2011-01-01

    Small practices often lack the human, financial and technical resources to make necessary practice improvements and infrastructure investments in order to achieve sustainable change that promotes quality and efficiency. To report on an effort to assist small primary care practices in improving quality of care and efficiency of practice management to meet the needs of patients, improve physician satisfaction and enhance the ability of these small practices to survive. We report on an intervention design and the reflections of the implementers on what they learned and what went well or poorly during implementation. Results of the intervention are reported separately (in Quality in Primary Care). Thirty practices underwent the entire intervention. The practices were selected on the basis of practice size, diversity in patient factors, apparent dedication to making practice improvements and geographic location. The main components of the intervention were two site visits to the participating practices by Center for Practice Innovation (CPI); now known as the Centre for Practice Improvement and Innovation, team members. The CPI team provided ongoing advice and support in focus areas selected by practices after initial site visit and assessment. A customised session focusing on the practice report and on helping practices to think about which areas they wished to improve was more effective in engaging practices than didactic presentation. Quality and practice management improvements were observed in information posting, patient education, staff communication and patient safety practices. Having a strong physician champion and a strong office manager determined to make quality improvement changes were important elements for successful change. In addition, practices with greater stability of staff and strong finances were more likely to meet project goals. Small practices today are facing a range of important challenges. The CPI sought to provide successful guidance to

  18. Psychosocial intervention, as a contribution to local human development within Medellin’s public scope. Case study: project aps - “buenvivir” (good living into a family. sponsor: City hall of Medellin, Colombia

    Directory of Open Access Journals (Sweden)

    J. J. García

    2013-10-01

    Full Text Available This article provides information about a research held on the psychosocial intervention offered from social projects such as educational formative spaces. A critical analysis is made by means of a government project conducted by the local administration of the city of Medellin known as “APS Buenvivir en Familia, 2011”, compiled by the Social Welfare Town Council Office, in association with the Municipality’s Health Department. Its purpose was to examine the logic and approach of psychosocial intervention as an input to human development. It was carried out through a qualitative focusing, taking in consideration the following categories: The psychosocial intervention has a definite impact on local human development, psychosocial praxis from the point of view of a public action strategy, community involvement taken as a true political act. The results showed that the psychosocial as a public exercise makes a contribution to local human development starting from the social involvement of communities and, in its everyday doing, presents structural and formal contradictions between the way they are designed and how the projects are planned and implemented among the people. 

  19. Roadmap for Inclusive Innovation

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Roadmap for Inclusive Innovation data set shares the status of action items under the Roadmap for Inclusive Innovation. Each action or project has been assigned...

  20. Innovative model of delivering quality improvement education for trainees – a pilot project

    Directory of Open Access Journals (Sweden)

    Kannan Ramar

    2015-09-01

    Full Text Available Background: After incorporating quality improvement (QI education as a required curriculum for our trainees in 2010, a need arose to readdress our didactic sessions as they were too long, difficult to schedule, and resulting in a drop in attendance. A ‘flipped classroom’ (FC model to deliver QI education was touted to be an effective delivery method as it allows the trainees to view didactic materials on videos, on their own time, and uses the classroom to clarify concepts and employ learned tools on case-based scenarios including workshops. Methods: The Mayo Quality Academy prepared 29 videos that incorporated the previously delivered 17 weekly didactic sessions, for a total duration of 135 min. The half-day session clarified questions related to the videos, followed by case examples and a hands-on workshop on how to perform and utilize a few commonly used QI tools and methods. Results: Seven trainees participated. There was a significant improvement in knowledge as measured by pre- and post-FC model test results [improvement by 40.34% (SD 16.34, p<0.001]. The survey results were overall positive about the FC model with all trainees strongly agreeing that we should continue with this model to deliver QI education. Conclusions: The pilot project of using the FC model to deliver QI education was successful in a small sample of trainees.

  1. The Muon Portal Project: Development of an Innovative Scanning Portal Based on Muon Tomography

    International Nuclear Information System (INIS)

    Bonanno, D.-L.; Indelicato, V.; Rocca, P.-La; Leonora, E.; Longhitano, F.; Presti, D.Lo; Petta, C.; Pugliatti, C.; Randazzo, N.; Riggi, F.; Russo, G.V.; Zappala, G.; Santagati, G.; Bonanno, G.; Antonuccio, V.; Bandieramonte, M.; Becciani, U.; Belluso, M.; Billotta, S.; Costa, A.; Massimino, P.; Pistagna, C.; Riggi, S.; Carbone, B.; Fallica, G.; Mazzillo, M.; Piana, A.; Sanfilippo, D.; Valvo, G.; Zaia, A.; Belluomo, F.; Puglisi, M.

    2013-06-01

    The Muon Portal is a recent Project [1] which aims at the construction of a 18 m 2 tracking detector for cosmic muons. This apparatus has been designed as a real-size prototype to inspect containers using the muon tomography technique, i.e. by measuring the deflection of muons when traversing high-Z materials. The detection setup is based on eight position-sensitive X-Y planes, four placed below and four above the volume to be inspected, with good tracking capabilities for charged particles. The detection planes are segmented into strips of extruded plastic scintillators with WLS fibres to transport the light produced in the scintillator material to the photo-sensors (SiPMs) at one of the fibre ends. Detailed GEANT4 simulations have been carried out under different scenarios to investigate the response of the apparatus. The tomographic images are reconstructed by tracking algorithms and suitable imaging software tools. Simulations have demonstrated the possibility to reconstruct a 3D image of the volume to be inspected in a reasonable amount of time, compatible with the requirement of a fast inspection technique. The first two of the 48 detection modules are presently under construction. (authors)

  2. Innovation Across the Federal Government

    Science.gov (United States)

    Innovation happens at EPA, but it also takes place at many other government agencies including NASA, DARPA, HHS, OPM, and USGS through projects such as SBIR, innovation labs, innovation offices, and high-risk, high-reward scientific research.

  3. Supporting student mental health nurses in clinical placement through virtual in-practice support (VIPS): Innovation uptake and the 'VIPS' project.

    Science.gov (United States)

    Hardy, Sally; Mushore, Manyara; Goddard, Linda

    2016-11-01

    The integration of technology in nurse education has become an essential element of academic practice. Yet innovation uptake between academic institutions across the four countries of the UK and their clinical practice partners has proved problematic, leading to a slow introduction of digitally enhanced teaching and learning innovations, particularly in the area of clinical decision making and leadership. The Virtual in Practice Support (VIPS) project involved two academic institutions working with the same mental health care service partner aiming to maximise student clinical placement learning. Student nurses in their final year of training were invited to take part in testing the viability of distance e-tutoring (via computer access to academic nurse lecturers) for facilitated critical reflection. An evaluation of the use of video linked conference sessions, set up for students to undertake a group based online (i.e. virtual) group tutorial is presented. All participants completed an evaluation data sheet using a five point Likert scale and free text evaluation feedback form completed at the end of each online tutorial session. Students were also invited to a focus group and all tutors were interviewed at the completion of the project. The VIPS project findings highlight; i) the importance of a clear project vision for innovation uptake ii) consequences of working with innovation champions and iii) how technology can be used to maximise student learning across geographical distance through online facilitated group critical discussion. VIPS' participants were able to articulate positive outcomes as a result of engaging in a multi-institutional project that capitalised on the richness of nursing clinical practice learning experience for both the students and the academics involved as innovation champions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. The Political Economy of Federally Sponsored Data

    Directory of Open Access Journals (Sweden)

    Bart Ragon

    2013-11-01

    Full Text Available Librarian involvement in the Open Access (OA movement has traditionally focused on access to scholarly publications. Recent actions by the White House have focused attention on access on the data produced from federally sponsored research. Questions have emerged concerning access to the output of federally sponsored research and whether it is a public or private good. Understanding the political battle over access to federally funded research is closely tied to the ownership of the peer review process in higher education and associated revenue streams, and as a result, interest groups seeking to influence government regulation have politicized the issues. As a major funder of research in higher education, policies from the federal government are likely to drive change in research practices at higher education institutions and impact library services. The political economy of federally sponsored research data will shape research enterprises in higher education inspire a number of new services distributed throughout the research life cycle.

  5. 77 FR 26697 - New Animal Drugs; Change of Sponsor; Change of Sponsor Address; Change of Sponsor Name and...

    Science.gov (United States)

    2012-05-07

    ... that it has transferred ownership of, and all rights and interest in, abbreviated new animal drug... HUMAN SERVICES Food and Drug Administration 21 CFR Parts 510 and 522 New Animal Drugs; Change of Sponsor... Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal...

  6. Contributions from the activity analysis to the products development project: case study based on a project of innovation and comfort in aircraft's cabins.

    Science.gov (United States)

    Greghi, F M; Rossi, N T; Souza, G B J; Menegon, L N

    2012-01-01

    Comfort is an issue that has gained relevance within the aeronautical industry due to the necessity of manufacturers and airline companies of differentiating themselves in a market that has become more and more competitive each day. This study's aim is to analyze the comfort/discomfort of passengers, based on the analysis of the activities performed in the aircrafts' cabin during real flights, in order to create ergonomics requirements and a methodology of comfort analysis. The study has been performed during domestic commercial flights, and the adopted data collection techniques have been: the application of 219 questionnaires to passengers, 44 registrations of postures and actions through filmings and 12 semistructured interviews. The method has made possible the reconstruction of the user's action course in performing activities in real flight situations, and the calculation of the area occupied by the passenger during his or her actions. The integrated analysis of the results corroborates data from previous studies in which both the space made available to each passenger and the activity performed interfere in their perception of comfort. From this study it has been concluded that the method constitutes itself as an innovative tool within the process of aircrafts' cabins project enabling the calculation of the action space based on the reconstructed course.

  7. Innovative approach for increasing physical activity among breast cancer survivors: protocol for Project MOVE, a quasi-experimental study.

    Science.gov (United States)

    Caperchione, Cristina M; Sabiston, Catherine M; Clark, Marianne I; Bottorff, Joan L; Toxopeus, Renee; Campbell, Kristin L; Eves, Neil D; Ellard, Susan L; Gotay, Carolyn

    2016-08-16

    Physical activity is a cost-effective and non-pharmaceutical strategy that can help mitigate the physical and psychological health challenges associated with breast cancer survivorship. However, up to 70% of women breast cancer survivors are not meeting minimum recommended physical activity guidelines. Project MOVE is an innovative approach to increase physical activity among breast cancer survivors through the use of Action Grants, a combination of microgrants (small amounts of money awarded to groups of individuals to support a physical activity initiative) and financial incentives. The purpose of this paper is to describe the rationale and protocol of Project MOVE. A quasi-experimental pre-post design will be used. Twelve groups of 8-12 adult women who are breast cancer survivors (N=132) were recruited for the study via face-to-face meetings with breast cancer-related stakeholders, local print and radio media, social media, and pamphlets and posters at community organisations and medical clinics. Each group submitted a microgrant application outlining their proposed physical activity initiative. Successful applicants were determined by a grant review panel and informed of a financial incentive on meeting their physical activity goals. An evaluation of feasibility will be guided by the reach, effectiveness, adoption, implementation, maintenance (RE-AIM) framework and assessed through focus groups, interviews and project-related reports. Physical activity will be assessed through accelerometry and by self-report. Quality of life, motivation to exercise and social connection will also be assessed through self-report. Assessments will occur at baseline, 6 months and 1 year. Ethical approval was obtained from the University of British Columbia's Behavioural Research Ethics Board (#H14-02502) and has been funded by the Canadian Cancer Society Research Institute (project number #702913). Study findings will be disseminated widely through peer-reviewed publications

  8. The new EC FP7 MatISSE project: materials' innovations for a safe and sustainable nuclear in Europe

    International Nuclear Information System (INIS)

    Cabet, C.; Michaux, A.; Fazio, C.; Malerba, L.; Maday, M.F.; Serrano, M.; Nilsson, K.F.; )

    2015-01-01

    The European Energy Research Alliance (EERA), set-up under the European SET-Plan, has launched an initiative for a Joint Programme on Nuclear Materials (JPNM). The JNMP aims to establish key priorities in the area of advanced nuclear materials, identify funding opportunities and harmonise this scientific and technical domain at the European level by maximising complementarities and synergies with the major actors of the field. The JPNM partners submitted the MatISSE proposal which was accepted by the European Commission. The MatISSE project has the ambition to prepare the building of a European integrated research programme on materials innovation for a safe and sustainable nuclear. Emphasis is on advanced nuclear systems in particular sodium-cooled fast reactor (SFR), lead-cooled fast reactor (LFR) and gas-cooled fast reactor (GFR). The aim of the selected scientific and technical work is to make progress in the fields of conventional materials, advanced materials and predictive capabilities for fuel elements and structural components. (authors)

  9. The Dynamics of Innovation Influents

    DEFF Research Database (Denmark)

    Reijonen, Satu; Pinheiro-Croisel, Rebecca

    Despite a growing interest, sustainable energy innovations encounter difficulties in attaining market success. This paper investigates the role of contracts, a hitherto understudied innovation influent, in generating more conducive conditions for sustainable energy innovations in building projects...... of the project and the ways in which the benefits and costs are calculated and thereby create a strong entanglement of the sustainable energy innovation and the design project. Furthermore, the dynamics lead to favouring of uptake of existing innovations rather than generating completely novel solutions...

  10. 14 CFR 152.309 - Availability of sponsor's records.

    Science.gov (United States)

    2010-01-01

    ... the purposes of accounting and audit. (b) The sponsor or planning agency shall allow appropriate FAA... to the sponsor or planning agency. (c) It audit findings have not been resolved, the applicable... sponsor's records. (a) The sponsor or planning agency shall allow any authorized representative of the...

  11. 48 CFR 35.017-1 - Sponsoring agreements.

    Science.gov (United States)

    2010-10-01

    ... sponsoring agreement or sponsoring agencies' policies and procedures: (1) A statement of the purpose and... of the FFRDC's relationship with its sponsor(s). (3) A provision for the identification of retained earnings (reserves) and the development of a plan for their use and disposition. (4) A prohibition against...

  12. Sponsors, Sponsorship Rates and the Immigration Multiplier.

    Science.gov (United States)

    Jasso, Guillermina; Rosenzweig, Mark R.

    1989-01-01

    Reviews evidence of the extent to which U.S. immigrants utilize the family reunification entitlements of immigration laws. Examines two studies of the immigrant cohort: Jasso and Rosenzweig (1986) and the General Accounting Office report (1988). Provides estimates of the characteristics of U.S. citizen sponsors of immigrant spouses and parents.…

  13. 22 CFR 62.3 - Sponsor eligibility.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Sponsor eligibility. 62.3 Section 62.3 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES EXCHANGE VISITOR PROGRAM General Provisions... visitor program are: (1) United States local, state and federal government agencies; (2) International...

  14. Agency-Sponsored Study Abroad Programs

    Science.gov (United States)

    Frey, James S.

    1976-01-01

    Sponsors of these programs include nonprofit organizations, proprietary agencies, wholly owned subsidiaries of U.S. corporations, and foreign-based institutions catering to North American students. Problems arising from their non-accredited status are examined and a criterion instrument for evaluating them is developed. (LBH)

  15. Open innovations, innovation communities and firm's innovative activities

    Directory of Open Access Journals (Sweden)

    Getejanc Vesna

    2016-01-01

    Full Text Available The open innovation paradigm emphasizes the fact that firms can improve their performance by opening their business models and reduce their R&D costs by effective incorporation of external knowledge. In other words, companies are able to capture value through knowledge that exists outside the boundaries of their organization. The shift from closed to open model of innovation has imposed the necessity to adopt more open approach to innovation within traditional academic view of business strategy. The adoption of this innovative approach is emphasized even more, by the necessity for stronger connection and cooperation among the participants of the innovation process. Free will and collaboration are the main characteristics of open source software, which is recognized in literature as the role model of open innovation and is a rapidly growing method of technology development. Furthermore, innovative communities represent a great opportunity for improvement of the companies' innovation activities, since they have become an important source for identifying the needs and problems of the users. Their development has been fostered by information technologies and recent social changes in user behavior. Recognizing and better understanding the motivation of the members of the innovation communities that guide them to participate in the process of idea generation, can have significant influence on their incorporation within the innovation process. Equally important is to define the incentives that are suited for stimulating and fostering innovative user activities. Taking this topic in consideration, the purpose of this article is to address the following questions: In what way does the collaboration in open source software projects have positive effect on companies' innovation performance? What are the innovation communities and how can companies establish successful interaction with them? Why does the interaction with innovation communities lead to

  16. Cheap-GSHPs, an European project aiming cost-reducing innovations for shallow geothermal installations. - Geological data reinterpretation

    Science.gov (United States)

    Bertermann, David; Müller, Johannes; Galgaro, Antonio; Cultrera, Matteo; Bernardi, Adriana; Di Sipio, Eloisa

    2016-04-01

    The success and widespread diffusion of new sustainable technologies are always strictly related to their affordability. Nowadays the energy price fluctuations and the economic crisis are jeopardizing the development and diffusion of renewable technologies and sources. With the aim of both reduce the overall costs of shallow geothermal systems and improve their installation safety, an European project has took place recently, under the Horizon 2020 EU Framework Programme for Research and Innovation. The acronym of this project is Cheap-GSHPs, meaning "cheap and efficient application of reliable ground source heat exchangers and pumps"; the CHEAP-GSHPs project involves 17 partners among 9 European countries such Belgium, France, Germany, Greece, Ireland, Italy, Romania, Spain, Switzerland. In order to achieve the planned targets, an holistic approach is adopted, where all involved elements that take part of shallow geothermal activities are here integrated. In order to reduce the drilling specific costs and for a solid planning basis the INSPIRE-conformal ESDAC data set PAR-MAT-DOM ("parent material dominant") was analysed and reinterpreted regarding the opportunities for cost reductions. Different ESDAC classification codes were analysed lithologically and sedimentologically in order to receive the most suitable drilling technique within different formations. Together with drilling companies this geological data set was translated into a geotechnical map which allows drilling companies the usage of the most efficient drilling within a certain type of underground. The scale of the created map is 1: 100,000 for all over Europe. This leads to cost reductions for the final consumers. Further there will be the definition of different heat conductivity classes based on the reinterpreted PAR-MAT-DOM data set which will provide underground information. These values will be reached by sampling data all over Europe and literature data. The samples will be measured by several

  17. Project management and institutional complexity in domestic housing refurbishment with innovative energy solutions : a case study analysis

    NARCIS (Netherlands)

    Hoppe, Thomas; Lulofs, Kristiaan R.D.

    2011-01-01

    Applying innovative energy solutions (IES) in dense residential areas in the Netherlands is a challenge. This paper presents a typology that supports the analysis and understanding of policy implementation processes to encourage the adoption of innovative energy solutions in urban residential areas.

  18. An inventory of innovative policies and measures for energy efficiency. Phase 1 of the EU SAVE 'White and Green' project

    International Nuclear Information System (INIS)

    Oikonomou, V.; Patel, M.

    2004-12-01

    This report provides an overview of the policies and measures (P+M) that enable the governments to achieve their energy efficiency targets. The focus is on outlining the mechanisms that increase the efficiency of final energy utilisation and analysing the effect of the various choices, using the experience obtained with instruments that are already implemented and analysing innovative policies and measures, which have been proposed. Apart from measures that directly concern energy efficiency, also other measures with similar effects are discussed, for example P+M for the reduction of Greenhouse Gases (GHG). At a lesser extent, technologies available for energy efficiency are screened, and the crucial problem of how to measure and certify the results of energy efficiency interventions is addressed. It can be argued that the most straightforward market mechanism to optimise energy efficiency would be to fully introduce externalities in the price that the end-user pays for energy. However, this appears to be quite impossible at least for the time being for a number of reasons: externalities are difficult to evaluate especially for long-term issues like climate change, and could be subject to litigation by interested parties; introduction of externalities in a subset of countries would penalise their industry with respect of that of the other countries; sudden increase of energy prices could destabilise the economy, etc. Moreover, for energy-extensive sectors the introduction of externalities into the price may not be a sufficient incentive for looking into solutions for energy efficiency improvements even when such solutions exist and are economically rewarding. Regulatory approaches can also be effective in many cases, and they coexist with market-oriented measures; however, the present project concentrates on non-regulatory measures, since they are seen to lead to more innovative solutions. Nevertheless, the interface with established and existing regulations will

  19. The Complex Dynamics of Sponsored Search Markets

    Science.gov (United States)

    Robu, Valentin; La Poutré, Han; Bohte, Sander

    This paper provides a comprehensive study of the structure and dynamics of online advertising markets, mostly based on techniques from the emergent discipline of complex systems analysis. First, we look at how the display rank of a URL link influences its click frequency, for both sponsored search and organic search. Second, we study the market structure that emerges from these queries, especially the market share distribution of different advertisers. We show that the sponsored search market is highly concentrated, with less than 5% of all advertisers receiving over 2/3 of the clicks in the market. Furthermore, we show that both the number of ad impressions and the number of clicks follow power law distributions of approximately the same coefficient. However, we find this result does not hold when studying the same distribution of clicks per rank position, which shows considerable variance, most likely due to the way advertisers divide their budget on different keywords. Finally, we turn our attention to how such sponsored search data could be used to provide decision support tools for bidding for combinations of keywords. We provide a method to visualize keywords of interest in graphical form, as well as a method to partition these graphs to obtain desirable subsets of search terms.

  20. Research and innovation in the `exploring our world´ project (6-12. The example of `exploring current and historical societies´ in initial teacher education

    Directory of Open Access Journals (Sweden)

    Jesús Estepa Giménez

    2012-04-01

    Full Text Available In this paper the authors present how they research and innovate in Initial Teacher Education programmes throught the `Exploring our world´ project (6-12. Along the article aspects related to the why, what for and how to teach of the curricular project are analysed by means of the example of `Exploring current and historical societies´. Trainees´ productions on this Field of Research are presented, in which they deal with the three afore-mentioned elements throught the design of didactic units that form part, like a portfolio, of the group reseach file.

  1. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Projects at NASA Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

    2015-01-01

    This document is intended to enable the more effective transition of NASA Glenn Research Center (GRC) SBIR technologies funded by the Small Business Innovation Research (SBIR) program as well as its companion, the Small Business Technology Transfer (STTR) program into NASA Aeronautics Research Mission Directorate (ARMD) projects. Primarily, it is intended to help NASA program and project managers find useful technologies that have undergone extensive research and development (RRD), through Phase II of the SBIR program; however, it can also assist non-NASA agencies and commercial companies in this process. aviation safety, unmanned aircraft, ground and flight test technique, low emissions, quiet performance, rotorcraft

  2. A European union (EU) co-operation program: Integral, innovative, industrial product design and development, I3PD(2) and project led education (PLE)

    DEFF Research Database (Denmark)

    Nielsen, Sven Hvid

    2007-01-01

    Aalborg University's project-organised and problem-oriented studies were introduced Thirty-three years ago. The experience since then has proved this to be an important innovation in higher education. The primary aim is to teach young people, students to become useful members for industry...... and society. Other primary objectives are to ensure high-quality research and education and to enhance technology transfer and to stimulate industry-university partnerships within the EU and stimulate Inter-University co-operation programmes. In this project we are focusing on the importance of curriculum...

  3. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Human Exploration and Operations Mission Directorate Projects at Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report is intended to help NASA program and project managers incorporate Glenn Research Center Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Human Exploration and Operations Mission Directorate (HEOMD) programs and projects. Other Government and commercial project managers can also find this useful. Introduction Incorporating Small Business Innovation Research (SBIR)-developed technology into NASA projects is important, especially given the Agency's limited resources for technology development. The SBIR program's original intention was for technologies that had completed Phase II to be ready for integration into NASA programs, however, in many cases there is a gap between Technology Readiness Levels (TRLs) 5 and 6 that needs to be closed. After SBIR Phase II projects are completed, the technology is evaluated against various parameters and a TRL rating is assigned. Most programs tend to adopt more mature technologies-at least TRL 6 to reduce the risk to the mission rather than adopt TRLs between 3 and 5 because those technologies are perceived as too risky. The gap between TRLs 5 and 6 is often called the "Valley of Death" (Figure 1), and historically it has been difficult to close because of a lack of funding support from programs. Several papers have already suggested remedies on how to close the gap (Refs. 1 to 4).

  4. CATEGORIES AND TOOLS FOR MANAGING THE INTEGRATED PROJECTS AND PROGRAMS OF INNOVATIVE DEVELOPMENT OF GEOTRIONS IN RUSSIA

    Directory of Open Access Journals (Sweden)

    Chudin Anatoly Andreyevich

    2013-05-01

    Full Text Available "An integrated approach to managing the development of the innovative three-component systems, including "population” (social sphere, economy (industrial sphere, and territory (regional sphere, has been developed." These spheres of innovative development have the earth coordinates, are linked non-continuously but inseparably, so they can be analyzed only comprehensively. Following N.D. Matrusov [1] we will call them geotrions. The most important problems in geotrion management are considered in many researches, including [2, 3, 4]. The developed approach serves to overcome many obstacles to the effective development of the innovation process in Russia. The work identifies its basic categories, tools and technologies. The developed approach has revealed the minimum full table of the most significant parameters in the management of the innovation process in the geotrion (parameters of the order and integral parameters of the interaction between the processes, which provided a simple model and the effectiveness of management, through the use of its own power.

  5. Knowledge intensive service activities and innovation in the Norwegian software industry - Part project report from the OECD KISA study

    OpenAIRE

    Broch, Marianne; Isaksen, Arne

    2004-01-01

    This report is the first of three studies of the use of knowledge intensive service activities (KISA) in innovation in specific industries. The report consists of the Norwegian part of an OECD study which includes several other countries. The main focus is on KISA in the software industry in Norway. One of the main objectives of the study is to provide insights into how software firms maintain and develop productive and innovative capabilities through utilisation of KISA, provided by internal...

  6. Building Capacity For Innovation Through R&D Consortia in Health Projects: From Network Interaction to Systemic Transformation

    Directory of Open Access Journals (Sweden)

    Ria Hardiyati

    2017-12-01

    The research capacity in the area of vaccines has been long started from individual research conducted by researcher. It has been continued into organization research, and then developed into building innovation capacity through R&D consortia. However, in areas of stem cell there is still lack of evidence but it directly leaps to build innovation capacity through R&D consortia. Therefore further empirical evidence is needed to support the continuous trajectory.

  7. Innovative casting process of lighter steel components for the transport industry (Brite/Euram III ''ICARO'' project)

    Energy Technology Data Exchange (ETDEWEB)

    Fuganti, A.; Corazzola, M. [Fiat SpA, Orbassano (Italy). Centro Ricerche

    2000-07-01

    The paper presents the main objectives and the technical approach of the ''ICARO'' European Brite project; the up-to-date results and the reached and expected deliverables are reviewed. The overall object of this project is to develop an innovative casting technology for manufacture near net shape steel components, compatible with the mass production requirements of transport industry. The proposed approach for reaching this target is to advance the lost foam technology for its application to steel. The overall objective of this project is to develop an advanced lost foam casting technology to manufacture near net shape steel components for the transport industry. Aiming at this target in the first 12-months of the project the work program was focused on the following main topics: definition of strategies to advance the L.F. process for steel casting, assessment of requirements and specifications for the automotive and aeronautical application that were selected as demonstrators to validate the technological innovation, component selection, first mechanical and microstructural characterisations. The purpose for the next two years is also to develop a numerical model for simulation. The developed software will be exploited for the industrial application design. In conclusion the success of the project will permit to develop casting procedure for lost foam process of steel parts, simulation software for LF-casting of steel and 2 different industrial application (one automotive and one aeronautical). These will be representative for comparing the developed innovative solution (material/process) with the traditional one in terms of components performance improvement, production costs saving, environmental impact benefit. (orig.)

  8. Culturally diverse management teams. Mercy International sponsors project on Guam.

    Science.gov (United States)

    White, K R

    1995-06-01

    In 1989 Mercy International Health Services (MIHS) sent a team of advisers to help upgrade the skills of the managers of Guam Memorial Hospital. Their experience offers lessons for U.S. healthcare organizations as they become culturally diverse. The hospital had a number of problems, including high management turnover, troubles with financial resources, political interference, and a building that did not meet codes. The advisers also planned to prepare the hospital for an accreditation survey by the Joint Commission on Accreditation of Healthcare Organizations (JCAHO). MIHS, which has a growing presence in the Pacific, does not take charge of healthcare organizations. Instead, it trains local persons to assume leadership roles. At Guam Memorial Hospital, the MIHS advisers spent their first year assessing the organization and the various cultures represented on its staff. Then the advisers devoted three years to coaching and mentoring their Guamanian counterparts. The advisers learned that the hospital had basically been run by one person. It had no management team, either formal or informal. The advisers began their coaching by forming a management team in the dietary department. When the rest of the hospital staff saw that team perform successfully, they became willing to join similar teams themselves. Guam Memorial Hospital had changed by the time the MIHS advisers left the island in 1993. It has not yet been accredited, but it does have management teams working to meet JCAHO standards. The hospital also has in place a continuous quality improvement system, with more than three years of documentation. And the hospital building now conforms to codes.

  9. The Doktabörse – an innovative online platform for research projects at the medical faculty of the LMU Munich

    Directory of Open Access Journals (Sweden)

    Nicolai, Leo

    2017-08-01

    Full Text Available Introduction: One of the most important extracurricular aspects of medical studies in Germany is a research thesis completed by most students. This research project often times conveys relevant competencies for the physician’s role as scientist. Nevertheless, the choice of the right project remains a challenge. Reasons for this are among others, missing structures for a comprehensive overview of research groups and their respective projects.Description of the project: We developed the online platform as an online marketplace for doctoral research projects. The platform enables authorized researchers to create working groups and upload, deactivate and change research projects within their institute. For interested students, a front end with integrated search function displays these projects in a structured and well-arranged way. In parallel, the provides for a comprehensive overview of research at the medical faculty. We evaluated Researchers‘ and students‘ use of the platform. Results: 96,6% of students participating in the evaluation (n=400 were in favor of a centralized research platform at the medical faculty. The platform grew at a steady pace and included 120 research groups in June 2016. The students appreciated the structure and design of the Two thirds of all uploaded projects matched successfully with doctoral students via the platform and over 94% of researchers stated that they did not need technical assistance with uploading projects and handling the platform. Discussion: The represents an innovative and well accepted platform for doctoral research projects. The platform is perceived positively by researchers and students alike. However, students criticized limited extent and timeliness of offered projects.In addition, the platform serves as databank of research at the medical faculty of the LMU Munich. The future potential of this platform is to provide for an integrated management solution of doctoral thesis projects

  10. The IAEA international project on innovative nuclear reactors and fuel cycles (INPRO): study on opportunities and challenges of large-scale nuclear energy development

    International Nuclear Information System (INIS)

    Khoroshev, M.; Subbotin, S.

    2006-01-01

    Existing scenarios for global energy use project that demand will at least double over the next 50 years. Electricity demand is projected to grow even faster. These scenarios suggest that the use of all available generating options, including nuclear energy, will inevitably be required to meet those demands. If nuclear energy is to play a meaningful role in the global energy supply in the foreseeable future, innovative approaches will be required to address concerns about economic competitiveness, environment, safety, waste management, potential proliferation risks and necessary infrastructure. In the event of a renaissance of nuclear energy, adequate infrastructure development will become crucial for Member States considering the future use of nuclear power. The IAEA should be ready to provide assistance in this area. A special resolution was adopted by the General Conference in September 2005 on 'Strengthening the Agency's Activities Related to Nuclear Science, Technology and Applications: Approaches to Supporting Nuclear Power Infrastructure Development'. Previously, in 2000, taking into account future energy scenarios and the needs of Member States, the IAEA General Conference had adopted a resolution initiating the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). Based on scenarios for the next fifty years, INPRO identified requirements for different aspects of future nuclear energy systems, such as economics, environment, safety, waste management, proliferation resistance and infrastructure and developed a methodology to assess innovative nuclear systems and fuel cycles. Using this assessment tool, the need for innovations in nuclear technology can be defined, which can be achieved through research, development and demonstration (RD and D). INPRO developed these requirements during its first stage, Phase 1A, which lasted from 2001 to mid-2003. In the second stage, Phase 1B (first part), INPRO organized 14 case studies (8 by

  11. The NASA Innovations in Climate Education Project: 'Instructional Strategies for Expanding Climate Change Concepts within Readng/Literacy Skills

    Science.gov (United States)

    Walton-Jaggers, L. J.; Johnson, D.; Hayden, L. B.; Hale, S. R.

    2013-12-01

    The Common Core State Standards (CCSS) provide a consistent, clear understanding of what students are expected to learn, so teachers and parents know what they need to do to help them. In 2010 the standards were designed to be robust and relevant to the real world, reflecting the knowledge and skills that young people need for success in college and careers. In 2013 the Next Generation Science Standards (NGSS) in connection with the CCSS developed revised science standards in performance, prior standards documents listed what students should know or understand, foundations were each performance expectation incorporates all three dimensions from a science or engineering practice, a core disciplinary idea, and a crosscutting concept, and coherence that connects each set of performance expectations lists connections to other ideas within the disciplines of science and engineering. Elizabeth City State University (ECSU) in Elizabeth City, North Carolina has joined with the University of New Hampshire (UNH) in Durham, New Hampshire under the NASA Innovations in Climate Education (NICE) grant to empower faculty of education programs at Minority Serving Institutions (MSIs) to better engage their pre-service teachers in teaching and learning about global climate change through the use of NASA Earth observation sets. Specifically, professors from MSIs received training with Global Positioning Systems (GPS) and GES-DISC Interactive Online Visualization And aNalysis Infrastructure (GIOVANNI) to engage pre-service teachers in facets of climate education. Grambling State University faculty members served as participants of the NICE workshop for 2012 and were encouraged to develop lessons in climate education from information shared at the workshop. A corresponding project that incorporated the CCSS and NGSS at Grambling State University in Grambling, Louisiana was headed by Dr. Loretta Jaggers. This paper documents activities that pre-service students in the GSU Curriculum and

  12. Guidance for the application of an assessment methodology for innovative nuclear energy systems. INPRO manual - Physical protection. Vol. 6 of the final report of phase 1 of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2008-11-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was initiated in the year 2000, based on a resolution of the IAEA General Conference (GC(44)/RES/21). The main objectives of INPRO are (1) to help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21st century in a sustainable manner, (2) to bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles; and (3) to create a forum to involve all relevant stakeholders that will have an impact on, draw from, and complement the activities of existing institutions, as well as ongoing initiatives at the national and international level. This document follows the guidelines of the INPRO report M ethodology for the assessment of innovative nuclear reactors and fuel cycles, Report of Phase 1B (first part) of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) , IAEA-TECDOC-1434 (2004), together with its previous report G uidance for the evaluation for innovative nuclear reactors and fuel cycles, Report of Phase 1A of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO), IAEATECDOC-1362 (2003). This INPRO manual is comprised of an overview volume and eight additional volumes covering the areas of economics (Volume 2), infrastructure (Volume 3), waste management (Volume 4), proliferation resistance (Volume 5), physical protection (Volume 6), environment (Volume 7), safety of reactors (Volume 8), and safety of nuclear fuel cycle facilities (Volume 9). The INPRO Manual for the area of physical protection (Volume 6) provides guidance to the assessor of an INS (innovative nuclear energy system) under a physical protection regime in a country that is planning to install a nuclear power program (or maintaining or enlarging an existing one), and describes the application of the

  13. Methodological Approach for the Sustainability Assessment of Development Cooperation Projects for Built Innovations Based on the SDGs and Life Cycle Thinking

    Directory of Open Access Journals (Sweden)

    Stephanie D. Maier

    2016-10-01

    Full Text Available This paper describes a methodological approach for a sustainability assessment of development cooperation projects. Between the scientific disciplines there is no agreement on the term of “sustainability”. Whereas the definition of sustainability within the context of development cooperation frequently highlights the long-term success of an intervention, the United Nations herald the inclusion of social, economic and environmental aspects. This paper proposes to bridge this gap by providing an analytical framework that uses nine impact category groups based on thematic priorities of sustainable development derived from the Sustainable Development Goals. Additionally, the long-term effectiveness of a project is taken into consideration. These impact category groups comprise the analytical framework, which is investigated by the Life Cycle Assessment and an indicator-based analysis. These data are obtained through empirical social research and the LCA inventory. The underlying concept is based on life cycle thinking. Taking up a multi-cycle model this study establishes two life cycles: first, the project management life cycle; and, second, the life cycle of a project’s innovation. The innovation’s life cycle is identified to have the greatest impact on the target region and the local people and is consequently of primary interest. This methodological approach enables an ex-post sustainability assessment of a built innovation of a development cooperation project and is tested on a case study on Improved Cooking Stoves in Bangladesh.

  14. Individual activities as an integrated part of project work - an innovative approach to project oriented and problem-based learning POPBL

    DEFF Research Database (Denmark)

    Moesby, Egon; Winther, Hans Henrik; Kørnøv, Lone

    2006-01-01

    In this paper, the authors describe and, on the basis of a recently conducted survey, evaluate a way to increase student learning through the introduction of an individual project activity to the project oriented and problem-based and team-based project work - POPBL. This can be achieved not just...... by adding an individual activity outside or parallel to the project work, but by having the individual activity embedded as an integrated part of the overall team-based project work. In what the authors have deemed the extended project model, students work individually in the solution phase of the project...... in an individual activity to subsequently be separately assessed. The results of the individually oriented project work form the platform for final work with the project as a team. The students in each team are expected to evaluate the individual solutions and select the one solution to work on in the final phases...

  15. 45 CFR 233.51 - Eligibility of sponsored aliens.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false Eligibility of sponsored aliens. 233.51 Section... CONDITIONS OF ELIGIBILITY IN FINANCIAL ASSISTANCE PROGRAMS § 233.51 Eligibility of sponsored aliens... affidavit(s) of support or similar agreement on behalf of an alien (who is not the child of the sponsor or...

  16. 14 CFR 151.121 - Procedures: Offer; sponsor assurances.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Procedures: Offer; sponsor assurances. 151.121 Section 151.121 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... Engineering Proposals § 151.121 Procedures: Offer; sponsor assurances. Each sponsor must adopt the following...

  17. 17 CFR 229.1104 - (Item 1104) Sponsors.

    Science.gov (United States)

    2010-04-01

    .... (c) Describe the sponsor's securitization program and state how long the sponsor has been engaged in the securitization of assets. The description must include, to the extent material, a general... material roles and responsibilities in its securitization program, including whether the sponsor or an...

  18. Osnovy formirovanija sistemy upravlenija riskami proektov innovacionnogo razvitija akvakul'tury v regione (Na primere Kaliningradskoj oblasti [The formation of a risk management system for projects in the field of aquaculture innovative development in the Kaliningrad region: a case study

    Directory of Open Access Journals (Sweden)

    Serbulov Alexey

    2012-01-01

    Full Text Available This article sets out to develop the concept and the principal scheme of the formation of a risk management system for innovative economic development projects in the field of aquaculture. The research carried out by the authors helps identify the main problems and characteristics of risk management projects for the development of aquaculture in presentday Russia. The authors outline the status and features of aquaculture development projects in the North-western federal district and the Kaliningrad region. The article formulates and justifies the concept of “risk management projects in innovative development of aquaculture in the region” focusing on the classification of aquaculture risks in relation to innovative development projects, which expands the conceptual framework of risk management in view of the specific risks relating to economic development projects in the field of aquaculture. The authors characterize modern methods and approaches to risk management projects and organizations in the context of their application in the framework of aquaculture development projects and offer mechanisms for risk management of aquaculture development projects, which make it possible to include risk management activity in the general context of activities of parent project organizations. The authors develop the concept and principal scheme of the formation of risk management system for innovative development projects in aquaculture.

  19. What can Bilfinger teach Olympic sponsors?

    Directory of Open Access Journals (Sweden)

    Mark Dodds

    2016-10-01

    Full Text Available Bilfinger SE (Bilfinger is a leading international engineering and services group (Bilfinger.com, 2015, and was a local sponsor of the 2014 FIFA World Cup. The company is accused of paying bribes through its subsidiary company, Mauell, (dw. com, 2015 to public officials in Brazil for contracts related to the 2014 World Cup (Cassin, 2015. The corruption allegations relate to orders to equip security command centers at twelve host cities during the 2014 World Cup in Brazil (dw.com, 2015. Because Brazil hosted the 2014 FIFA World Cup and will host the 2016 Summer Olympic Games, companies need to consider the risks of many international anti-corruption laws, such as Brazil’s anti-corruption law commonly referred as The Clean Companies Act and other applicable anticorruption law like the United States’ Foreign Corrupt Practices Act (Rogers, et. al, 2014. This paper will analyze the Bilfinger case involving corruption activity at the 2014 FIFA World Cup and offer insights for sponsors of the 2016 Summer Olympic Games.

  20. Write. Persist. Struggle: Sponsors of Writing and Workers' Education in the 1930s

    Science.gov (United States)

    Mutnick, Deborah

    2016-01-01

    Organizations like the John Reed Clubs and the WPA Federal Writers' Project, as well as publications like "The New Masses" can be seen as "literacy sponsors" of the U.S. literary left in the 1930s, particularly the young, the working class, and African American writers. The vibrant, inclusionary, activist, literary culture of…

  1. Essence: Facilitating Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2008-01-01

      This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL) ......) – and a new method concept for software innovation – Essence – based on views, modes, and team roles. Finally, the paper reports from an early experiment using SIRL and Essence and identifies further research.......  This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL...

  2. Challenges Related to the Use of Liquid Metal and Molten Salt Coolants in Advanced Reactors. Report of the collaborative project COOL of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2013-05-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was launched in 2000, based on a resolution by the IAEA General Conference (GC(44)/RES/21). INPRO aims at helping to ensure that nuclear energy is available in the twenty-first century in a sustainable manner, and seeks to bring together all interested Member States, both technology holders and technology users, to jointly consider actions to achieve desired innovations. INPRO is taking care of the specific needs of developing countries. One of the aims of INPRO is to develop options for enhanced sustainability through promotion of technical and institutional innovations in nuclear energy technology through collaborative projects among IAEA Member States. Collaboration among INPRO members is fostered on selected innovative nuclear technologies to bridge technology gaps. Collaborative projects have been selected so that they complement other national and international R and D activities. The INPRO Collaborative Project COOL on Investigation of Technological Challenges Related to the Removal of Heat by Liquid Metal and Molten Salt Coolants from Reactor Cores Operating at High Temperatures investigated the technological challenges of cooling reactor cores that operate at high temperatures in advanced fast reactors, high temperature reactors and accelerator driven systems by using liquid metals and molten salts as coolants. The project was initiated in 2008 and was led by India; experts from Brazil, China, Germany, India, Italy and the Republic of Korea participated and provided chapters of this report. The INPRO Collaborative Project COOL addressed the following fields of research regarding liquid metal and molten salt coolants: (i) survey of thermophysical properties; (ii) experimental investigations and computational fluid dynamics studies on thermohydraulics, specifically pressure drop and heat transfer under different operating conditions; (iii) monitoring and control of coolant

  3. Everyday-Oriented Innovation

    DEFF Research Database (Denmark)

    Munnecke, Max

    , business, and society. The study addresses the concern that vision projects do not produce sufficient navigational innovation maps, and seeks to improve their quality by modelling a new methodological framework. The study was conducted as a series of four research cycles which modelled and experimented......The exploration of radical innovation has long been regarded as fundamental to business growth. In the 21st century, modern organisations increasingly seek to combine business innovation with the broader goal to confront social and environmental challenges. Vision projects are related phenomena...... which explore and map radical innovation opportunities within everyday activities. The aim of a vision project is to produce an innovation map that can empower an organisation to navigate between potential innovation opportunities and pro‐actively confront modern challenges for the benefit of people...

  4. Large-scale Water-related Innovative Renewable Energy Projects and the Water Framework Directive : Legal Issues and Solutions

    NARCIS (Netherlands)

    van Hees, S.R.W.

    2017-01-01

    This article discusses two legal issues that relate to the conflict between the interest of protecting water quality under the Water Framework Directive (WFD), versus the interest of promoting the use of innovative water-related renewable energy, with regard to the quota in the Renewable Energy

  5. Large-scale Water-related Innovative Renewable Energy Projects and the Habitats and Birds Directives: Legal Issues and Solutions

    NARCIS (Netherlands)

    van Hees, S.R.W.

    This article discusses two legal issues that relate to the conflict between the interest of protecting habitats and species under the Habitats and Birds Directives, versus the interest of promoting the use of innovative water-related renewable energy, with regard to the quota in the Renewable Energy

  6. Interdisciplinary Undergraduate Education: CIC Project on the Future of Independent Higher Education. Innovations in Teaching and Learning. Research Brief 2

    Science.gov (United States)

    Katz, Philip M.

    2015-01-01

    During the most recent decade, interdisciplinary instruction at the undergraduate level has increased rapidly. Independent colleges and universities are both innovators in developing new approaches to interdisciplinary education and strong supporters of traditional liberal arts disciplines. Some observers argue that interdisciplinary approaches…

  7. Innovation Can Be Learned

    Science.gov (United States)

    Cankar, Stanka Setnikar; Cankar, Franc

    2013-01-01

    A two-year project was organised to promote creativity, innovation and entrepreneurship for young people in eight Slovenian regions. The project's aim was to train teacher-mentors, who then trained pupils and worked with them and local community representatives to carry out projects. The paper presents the findings of a project that monitored the…

  8. Academic investigator-initiated trials and the challenge of sponsor responsibility: the Cologne Sponsor Model.

    Science.gov (United States)

    Georgias, Christine; Grunow, Andrea; Olderog, Miriam; May, Alexander; Paulus, Ursula

    2012-12-01

    With the amendment to the German Drug Law in 2004, the conduct of clinical trials changed by at least two main aspects: (1) The principles of Good Clinical Practice (GCP) were implemented in the national legislation, and (2) for the first time, the function of the sponsor of a clinical trial and the clinical trial itself have become legally binding definitions. By that, legal differences between industrial and academic clinical trials no longer exist. Clinical trials initiated by investigators have to fulfil the same requirements while the entire sponsor responsibility has to be carried out by the Coordinating Investigator or his institution including implementation of a quality management system according to the GCP. The Cologne Sponsor Model is an effective approach with settings, structures, basic features, action, and reporting lines, as well as funding for clinical trials initiated in an academic environment. The University of Cologne assumes the sponsor responsibility for clinical trials organised by the university researchers according to law. Sponsor's duties are delegated to a central operational unit of the sponsor - the Clinical Trials Center Cologne - which further delegates duties to the Coordinating Investigator. Clinical Trials Center Cologne was established in 2002 to support the performance of clinical trials at the university by offering comprehensive advisory and practical services covering all aspects of study planning and conduct. Furthermore, a specialised division of its quality management department acts as an independent sponsor's Quality Assurance Unit. The Clinical Trials Center Cologne has established a quality management system consisting of different components (1) to enable a reasoned decision to subsequent delegation, (2) for risk-based surveillance of trial conduct (audits, monitoring-checks, and reports), and (3) support and training of the Coordinating Investigator. Double functions of persons and departments in the university

  9. Bio-Manufacturing to market pilot project

    Energy Technology Data Exchange (ETDEWEB)

    Dressen, Tiffaney [Univ. of California, Berkeley, CA (United States)

    2017-09-25

    The Bio-Manufacturing to Market pilot project was a part of the AMJIAC, the Advanced Manufacturing Jobs and Innovation Accelerator Challenge grant. This internship program set out to further define and enhance the talent pipeline from the University and local Community Colleges to startup culture in East Bay Area, provide undergraduate STEM students with opportunities outside academia, and provide startup companies with much needed talent. Over the 4 year period of performance, the Bio-Manufacturing to Market internship program sponsored 75 undergraduate STEM students who were able to spend anywhere from one to six semesters working with local Bay Area startup companies and DOE sponsored facilities/programs in the biotech, bio-manufacturing, and biomedical device fields.

  10. INPRO Assessment of the Planned Nuclear Energy System of Belarus. A report of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2013-09-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was started in 2001 on the basis of IAEA General Conference resolution GC(44)/RES/21. INPRO activities have since been continuously endorsed by IAEA General Conference resolutions and by the General Assembly of the United Nations. The objectives of INPRO are to help ensure that nuclear energy is available to contribute, in a sustainable manner, to the goal of meeting the energy needs of the 21st century, and to bring together technology holders and users so that they can jointly consider the international and national actions required for ensuring sustainability of nuclear energy through innovations in technology and/or institutional arrangements. To fulfill these objectives, INPRO has developed a set of basic principles, user requirements and criteria, and an assessment method which, taken together, comprise the INPRO methodology for the evaluation of the long term sustainability of innovative nuclear energy systems. The INPRO methodology is documented in IAEA-TECDOC-1575 Rev.1, comprising an overview volume and eight additional volumes covering economics, institutional measures (infrastructure), waste management, proliferation resistance, physical protection, environment (impact of stressors and availability of resources), safety of reactors, and safety of nuclear fuel cycle facilities. This publication is the final report of an assessment of the planned nuclear energy system of Belarus using the INPRO methodology. The assessment was performed in 2009-2011 by Belarusian experts in a strategic partnership with the Russian Federation and with support from the IAEA's INPRO Group

  11. Visitors at the information point opposite the CERN reception building, learn more about the Globe of Innovation project.

    CERN Document Server

    Maximilien Brice

    2004-01-01

    Work to reassemble the former Palais de l'Equilibre, which was first erected in Neuchâtel for the EXPO.02 exhibition, began on 18 May. The sphere, measuring 40 metres in diameter, has now been renamed the Globe of Innovation. A detachment from the Swiss army is carrying out the work, which will be completed in time for the Organization's official fiftieth anniversary celebrations.

  12. International Cooperation for the next 50 years: The International Project on Innovative Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    Kupitz, J.; Steur, R.; Depisch, F.

    2004-01-01

    During the last fifty years remarkable results are achieved in the application of nuclear technology for the production of electricity. Looking ahead to the next fifty years it is clear that the demand for energy will grow considerably and also the requirements for the way the energy will be supplied. Within INPRO the future of the energy demand and supply was explored and several scenario's identified. A leading requirement for energy supply is coming up and will play a crucial role: sustainability of the way the energy supply will be realized. Fulfilling the growing need for energy in developing countries is as well an important issue. Based on these scenario's for the next fifty years, an inventory of requirements for the future of nuclear energy systems has been collected as well a methodology developed by INPRO to assess innovative nuclear systems and fuel cycles. On the base of this assessment, the need for innovations and breakthroughs in existing technology can be defined. To facilitate the deployment of innovative nuclear systems also the infrastructure, technical as well institutional has to be adjusted to the anticipated changes in the world such as the globalization. As a contribution to the conference the main messages of INPRO will be presented. (Author)

  13. International Cooperation for the next 50 years: The International Project on Innovative Reactors and Fuel Cycles (INPRO)

    Energy Technology Data Exchange (ETDEWEB)

    Kupitz, J.; Steur, R.; Depisch, F. [IAEA, Wagramerstrasse 5, PF 100, 1400 Vienna (Austria)]. e-mail: J.Kupitz@iaea.org

    2004-07-01

    During the last fifty years remarkable results are achieved in the application of nuclear technology for the production of electricity. Looking ahead to the next fifty years it is clear that the demand for energy will grow considerably and also the requirements for the way the energy will be supplied. Within INPRO the future of the energy demand and supply was explored and several scenario's identified. A leading requirement for energy supply is coming up and will play a crucial role: sustainability of the way the energy supply will be realized. Fulfilling the growing need for energy in developing countries is as well an important issue. Based on these scenario's for the next fifty years, an inventory of requirements for the future of nuclear energy systems has been collected as well a methodology developed by INPRO to assess innovative nuclear systems and fuel cycles. On the base of this assessment, the need for innovations and breakthroughs in existing technology can be defined. To facilitate the deployment of innovative nuclear systems also the infrastructure, technical as well institutional has to be adjusted to the anticipated changes in the world such as the globalization. As a contribution to the conference the main messages of INPRO will be presented. (Author)

  14. Innovation in POPBL teaching and learning methods by embedding individual activities as an integrated part of project work

    DEFF Research Database (Denmark)

    Moesby, Egon; W., Hans Henrik; Kørnøv, Lone

    2005-01-01

    activity embedded as an integrated part of the project work. Students work in the solution phase of the project on an individual activity that is separately assessed. The results of these individual activities form the platform for students’ final work with the project as a team. They have to evaluate......In this paper, the authors describe a way to increase student learning through social constructed teamwork by adding an individual activity to the project work. This can be achieved not just by adding an individual activity outside or parallel to the project work, but by having the individual...... the individual solutions and find the one solution to work on in the final phases of the project. On top of that, it helps train students’ abilities to make evaluations among various solutions of which one is their own, thereby learning how to evaluate their personal solutions against another person’s solutions...

  15. The Pan-European Reference Grid Developed in the ELECTRA Project for Deriving Innovative Observability Concepts in the Web-of-Cells Framework

    DEFF Research Database (Denmark)

    Marinelli, Mattia; Pertl, Michael; Rezkalla, Michel M.N.

    2016-01-01

    In the ELECTRA EU project, an innovative approach for frequency and voltage control is investigated, with reference to future power system scenarios characterized by massive amounts of distributed energy resources. A control architecture based on dividing the power system into a web of subsystems......, the so-called cells, is proposed. Cells are individual control entities but also need to be coordinated together at system-wide level, in order to ensure secure and reliable overall operation (at Pan-European level). Task 5.4 in the ELECTRA project focuses on deriving novel observability concepts...... at system-wide scale. The methodology proposed in the task analyzes the system performance by investigating typical phenomena peculiar to each stability type and by developing observables necessary for the novel Web-of-Cells based control methods to operate properly at cell- and inter-cell level. Crucial...

  16. Innovative learning for innovation

    NARCIS (Netherlands)

    Dr.Ir. Hay Geraedts

    2010-01-01

    Introduction Innovation is crucial for companies who have to react to constantly changing markets. Several national and European research institutes stress the importance of developing innovation for small and medium size enterprises (SMEs). This was a trigger to design a minor on strategic

  17. Innovations in mental health services implementation: a report on state-level data from the U.S. Evidence-Based Practices Project

    Directory of Open Access Journals (Sweden)

    Magnabosco Jennifer L

    2006-05-01

    Full Text Available Abstract Background The Evidence-Based Practice (EBP Project has been investigating the implementation of evidence-based mental health practices (Assertive Community Treatment, Family Psychoeducation, Integrated Dual Diagnosis Treatment, Illness Management and Recovery, and Supported Employment in state public mental health systems in the United States since 2001. To date, Project findings have yielded valuable insights into implementation strategy characteristics and effectiveness. This paper reports results of an effort to identify and classify state-level implementation activities and strategies employed across the eight states participating in the Project. Methods Content analysis and Greenhalgh et al's (2004 definition of innovation were used to identify and classify state-level activities employed during three phases of EBP implementation: Pre-Implementation, Initial Implementation and Sustainability Planning. Activities were coded from site visit reports created from documents and notes from key informant interviews conducted during two periods, Fall 2002 – Spring 2003, and Spring 2004. Frequency counts and rank-order analyses were used to examine patterns of implementation activities and strategies employed across the three phases of implementation. Results One hundred and six discreet implementation activities and strategies were identified as innovative and were classified into five categories: 1 state infrastructure building and commitment, 2 stakeholder relationship building and communications, 3 financing, 4 continuous quality management, and 5 service delivery practices and training. Implementation activities from different categories were employed at different phases of implementation. Conclusion Insights into effective strategies for implementing EBPs in mental health and other health sectors require qualitative and quantitative research that seeks to: a empirically test the effects of tools and methods used to implement EBPs

  18. Hybrid Nanocomposite Photovoltaics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop an innovative solar cell design that combines nanotechnology with conducting polymer...

  19. Status and trends of nuclear technologies - Report of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). Additional information (Companion CD-ROM)

    International Nuclear Information System (INIS)

    2009-09-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was launched in the year 2000, based on a resolution by the IAEA General Conference (GC(44)/RES/21). INPRO intends to help to ensure that nuclear energy is available in the 21st century in a sustainable manner, and seeks to bring together all interested Member States, both technology holders and technology users, to consider, jointly, actions to achieve desired innovations. INPRO is taking care of the specific needs of developing countries. This IAEA publication is part of Phase 1 of INPRO. It intends to provide an overview on history, present situation and future perspectives of nuclear fuel cycle technologies. While this overview focuses on technical issues, nevertheless, the aspects of economics, environment, and safety and proliferation resistance are important background issues for this study. After a brief description about the INPRO project and an evaluation of existing and future reactor designs the publication covers nuclear fuel cycle issues in detail. It is expected that this documentation will provide IAEA Member States and their nuclear engineers and designers, as well as policy makers with useful information on status and trends of future nuclear fuel cycle technologies. Due to the size of the full report it was decided to attach a CD-ROM in the back of the summary report

  20. A new model for graduate education and innovation in medical technology.

    Science.gov (United States)

    Yazdi, Youseph; Acharya, Soumyadipta

    2013-09-01

    We describe a new model of graduate education in bioengineering innovation and design- a year long Master's degree program that educates engineers in the process of healthcare technology innovation for both advanced and low-resource global markets. Students are trained in an iterative "Spiral Innovation" approach that ensures early, staged, and repeated examination of all key elements of a successful medical device. This includes clinical immersion based problem identification and assessment (at Johns Hopkins Medicine and abroad), team based concept and business model development, and project planning based on iterative technical and business plan de-risking. The experiential, project based learning process is closely supported by several core courses in business, design, and engineering. Students in the program work on two team based projects, one focused on addressing healthcare needs in advanced markets and a second focused on low-resource settings. The program recently completed its fourth year of existence, and has graduated 61 students, who have continued on to industry or startups (one half), additional graduate education, or medical school (one third), or our own Global Health Innovation Fellowships. Over the 4 years, the program has sponsored 10 global health teams and 14 domestic/advanced market medtech teams, and launched 5 startups, of which 4 are still active. Projects have attracted over US$2.5M in follow-on awards and grants, that are supporting the continued development of over a dozen projects.

  1. Learning to Innovate

    DEFF Research Database (Denmark)

    Mei, Maggie

    . Specifically, essay 1 focuses on how to manage ambidextrous learning for superior radical and incremental innovation capabilities; essay 2 examines how learning through knowledge sharing in the context of standard setting impacts on firms’ innovation performance; and essay 3 moves down to project level...... the relationship between organizational learning and innovation creation in an organizational context. Taking a nuanced view of organizational learning, the dissertation investigates how three different organizational learning processes could affect innovation creation at the firm level and project level...... to the understanding of managing organizational learning for innovation creation at firms. The three studies in this dissertation show how three prominent organizational learning processes impact on firms’ innovation performance. Furthermore, the studies in this dissertation emphasize that there are limitation...

  2. The Drawbacks of Project Funding for Epistemic Innovation: Comparing Institutional Affordances and Constraints of Different Types of Research Funding

    Science.gov (United States)

    Franssen, Thomas; Scholten, Wout; Hessels, Laurens K.; de Rijcke, Sarah

    2018-01-01

    Over the past decades, science funding shows a shift from recurrent block funding towards project funding mechanisms. However, our knowledge of how project funding arrangements influence the organizational and epistemic properties of research is limited. To study this relation, a bridge between science policy studies and science studies is…

  3. Elder people learning to be mentors for young people. HEAR ME: An innovative project in five EU countries

    DEFF Research Database (Denmark)

    Rothuizen, Jan Jaap; Klausen, Bodil; Hesselbjerg, Jannie Sloth

    2011-01-01

    we practiced the art of tailoring the suits to the person: the project and the course that fits to the local conditions. In this process we used some analytical and planning instruments: we made a SWOT and a SOAR analysis, we developed the projects in a circular planning process (SMTTE), we developed...

  4. Participatory science and innovation for improved sanitation and hygiene: process and outcome evaluation of project SHINE, a school-based intervention in Rural Tanzania.

    Science.gov (United States)

    Hetherington, Erin; Eggers, Matthijs; Wamoyi, Joyce; Hatfield, Jennifer; Manyama, Mange; Kutz, Susan; Bastien, Sheri

    2017-02-07

    Diarrheal disease is a major cause of mortality and morbidity in low and middle income countries with children being disproportionately affected. Project SHINE (Sanitation & Hygiene INnovation in Education) is a grassroots participatory science education and social entrepreneurship model to engage youth and the wider community in the development of sustainable strategies to improve sanitation and hygiene. Based in rural and remote Tanzania, this pilot study engaged pastoralist high-school students and communities in the development and evaluation of culturally and contextually relevant strategies to improve sanitation and hygiene. Using a train-the-trainer approach, key activities included teacher workshops, school-based lessons, extra-curricular activities, community events and a One Health sanitation science fair which showcased projects related to water, sanitation and hygiene in relation to human and animal health. The process and outcome of the study were evaluated through qualitative interviews and focus group discussions with diverse project participants, as well as pre- and post- questionnaires completed by students on knowledge, attitudes and practices concerning sanitation and hygiene. The questionnaire results at baseline and follow-up showed statistically significant improvements on key measures including a decrease in unhygienic behaviors, an increase in the perceived importance of handwashing and intention to use the toilet, and increased communication in the social network about the importance of clean water and improved sanitation and hygiene practices, however there were no significant changes in sanitation related knowledge. Qualitative data highlighted strong leadership emerging from youth and enthusiasm from teachers and students concerning the overall approach in the project, including the use of participatory methods. There was a high degree of community engagement with hundreds of community members participating in school-based events

  5. Logistics Innovation Process Revisited

    DEFF Research Database (Denmark)

    Gammelgaard, Britta; Su, Shong-Iee Ivan; Yang, Su-Lan

    2011-01-01

    Purpose – The purpose of this paper is to learn more about logistics innovation processes and their implications for the focal organization as well as the supply chain, especially suppliers. Design/methodology/approach – The empirical basis of the study is a longitudinal action research project...... innovation process model may include not just customers but also suppliers; logistics innovation in buyer-supplier relations may serve as an alternative to outsourcing; logistics innovation processes are dynamic and may improve supplier partnerships; logistics innovations in the supply chain are as dependent...... into the process of a logistics innovation in an oriental healthcare supply chain context. The study is, however, still limited in disclosing end-to-end supply chain benefits including concrete performance improvements at the suppliers. Examining logistics innovation processes should result not only...

  6. Lessons Learned from Nuclear Energy System Assessments (NESA) Using the INPRO Methodology. A Report of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2009-11-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was initiated in 2001 on the basis of a resolution of the IAEA General Conference in 2000 (GC(44)/RES/21). INPRO activities have since been continuously endorsed by resolutions of IAEA General Conferences and by the General Assembly of the United Nations. The objectives of INPRO are to: Help ensure that nuclear energy is available to contribute, in a sustainable manner, to meeting the energy needs of the 21st century; Bring together technology holders and users so that they can consider jointly the international and national actions required for achieving desired innovations in nuclear reactors and fuel cycles. INPRO is proceeding in steps. In its first step, referred to as Phase 1, 2001 to 2006, INPRO developed a set of basic principles, user requirements and criteria together with an assessment method, which taken together, comprise the INPRO methodology for the evaluation of innovative nuclear energy systems. To provide additional guidance in using the INPRO methodology an INPRO Manual was developed; it is comprised of an overview volume and eight additional volumes covering the areas of economics, infrastructure, waste management, proliferation resistance, physical protection, environment, safety of reactors, and safety of the nuclear fuel cycle facilities. Based on a decision of the 9 INPRO steering committee in July 2006, INPRO has entered into Phase 2. This phase has three main directions of activity: methodology improvement, infrastructure/institutional aspects and collaborative projects. As of March 2009, INPRO had 28 members: Argentina, Armenia, Belarus, Belgium, Brazil, Bulgaria, Canada, Chile, China, Czech Republic, France, Germany, India, Indonesia, Japan, Republic of Korea, Morocco, Netherlands, Pakistan, the Russian Federation, Slovakia, South Africa, Spain, Switzerland, Turkey, Ukraine, United States of America and the European Commission. This IAEA-TECDOC is part of

  7. The Introduction of Innovative Services in a State Owned Airline: A Case Study of an IT Migration Project

    Directory of Open Access Journals (Sweden)

    Konstantinos Malagas

    2013-03-01

    Full Text Available This study critically examines the transition process followed by a state-owned airline in a major IT migration project (introduction of novel electronic services. The change management process proposed by Kotter (1995 is examined in relation to the different phases identifed, based on an interview based qualitative research. Focusing on the project team leaders a set of results is identifed / determined, which provides signifcant insight into the key factors, defciencies and outcomes of the project, with reference to the characteristics of a state-owned company. Further elaboration of the proposed methodology is deemed to be applicable in the identifcation of the weak and strong points of similar change projects.

  8. How Student Written Communication Skills Benefit during Participation in an Industry-Sponsored Civil Engineering Capstone Course

    Science.gov (United States)

    Fries, Ryan; Cross, Brad; Zhou, Jianpeng; Verbais, Chad

    2017-01-01

    Because many engineering programs use capstone design courses and value strong communication abilities, authors sought to identify how student written communication skills changed because of industry-sponsored capstone design projects. A student exit survey was collected at the end of the capstone design course during faculty-led projects and…

  9. Innovation without Design?

    DEFF Research Database (Denmark)

    Pinheiro-Croisel, Rebecca; Hernes, Tor

    2012-01-01

    This paper explores innovation and social behaviourist theory in relation to sustainable urban projects in the highly institutionalized public sector (towns). Using empirical data from France, we examine the dynamics of a design process in which unexpected practices generated innovative urban des...

  10. Innovation in Product Development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Restrepo-Giraldo, John Dairo

    2005-01-01

    The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...

  11. NASA Sponsors Cancer Research at Children's Hospital

    Science.gov (United States)

    1998-01-01

    NASA Administrator Dan Goldin (left), during a visit at Children's Hospital of Wisconsin in Milwaukee, Wisconsin, discussed how NASA's special lighting technology may soon treat cancer. Goldin talked with Dr.Harry Whelan (right) and Dr. Kerneth Reichert (center left), both pediatric neurologists with the Hospital and professors at the Medical College of Wisconsin in Milwaukee. Accompanied by Astronaut Mary Ellen Weber, Goldin was shown this innovative treatment, called Photodynamic Therapy, a method used to destroy the tumor without damaging the delicate brain tissue around it. The treatment uses tiny pinhead-size Light Emitting Diodes (LEDs) developed for Space Product Development plant growth experiments.

  12. Guidance for the application of an assessment methodology for innovative nuclear energy systems. INPRO manual - Safety of nuclear reactors. Vol. 8 of the final report of phase 1 of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2008-11-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was initiated in the year 2000, based on a resolution of the IAEA General Conference (GC(44)/RES/21). The main objectives of INPRO are (1) to help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21st century in a sustainable manner, (2) to bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles; and (3) to create a forum to involve all relevant stakeholders that will have an impact on, draw from, and complement the activities of existing institutions, as well as ongoing initiatives at the national and international level. The INPRO manual is comprised of an overview volume (No. 1), and eight additional volumes covering the areas of economics (Volume 2), infrastructure (Volume 3), waste management (Volume 4), proliferation resistance (Volume 5), physical protection (Volume 6), environment (Volume 7), safety of nuclear reactors (laid out in this volume) (Volume 8), and safety of nuclear fuel cycle facilities (Volume 9). The goal of this volume of the INPRO manual is to provide guidance to the assessor of the safety of a nuclear reactor in a country or region (or even on a global scale) that is planning to install a nuclear power program (or maintaining or enlarging an existing one), how to apply the INPRO methodology in this specific area. The INPRO Manual starts with an introduction in Chapter 1. Chapter 2 sets out the necessary input for an INPRO assessment of the safety of an innovative nuclear reactor. This includes information on the design and safety assessment (including the safety analysis). This chapter also discusses the timing of the INPRO assessment. In Chapter 3 rationale and background for the INPRO safety related basic principle(s) (BP), user requirements (UR) and criteria (CR) is provided. On

  13. Methodology for the assessment of innovative nuclear reactors and fuel cycles. Report of Phase 1B (first part) of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

    International Nuclear Information System (INIS)

    2004-12-01

    The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was initiated in the year 2000, based on resolution of the IAEA General Conference (GC(44)/RES/21). This followed an initiative of the Russian Federation supported by a group of IAEA Member States to join forces in a broad international effort to develop innovative nuclear reactor and fuel cycle technology, recognizing that: A sustainable energy supply for humanity in the 21st century will require the large-scale deployment of nuclear power as well as other energy sources; Nuclear power is an energy technology that offers practically unlimited energy resources whose deployment can reduce environmental pollution and the volumes of waste needing management, including greenhouse gas emissions. As of December 2004, INPRO has 22 members: Argentina, Armenia, Brazil, Bulgaria, Canada, Chile, China, Czech Republic, France, Germany, India, Indonesia, Morocco, Netherlands, Republic of Korea, Pakistan, Russian Federation, South Africa, Spain, Switzerland, Turkey and the European Commission. The main objectives of INPRO are to: Help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21st century in a sustainable manner; Bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles; and to Create a forum to involve all relevant stakeholders that will have an impact on, draw from, and complement the activities of existing institutions, as well as ongoing initiatives at the national and international level. To realize its objectives, INPRO has adopted a stepwise approach. In the first step, called Phase 1A, task groups established a hierarchy of Basic Principles, User Requirements and Criteria, in the areas of economics, safety, environment, waste management, proliferation resistance, and infrastructure, that must be fulfilled by

  14. Team sponsors in community-based health leadership programs.

    Science.gov (United States)

    Patterson, Tracy Enright; Dinkin, Donna R; Champion, Heather

    2017-05-02

    Purpose The purpose of this article is to share the lessons learned about the role of team sponsors in action-learning teams as part of community-based health leadership development programs. Design/methodology/approach This case study uses program survey results from fellow participants, action learning coaches and team sponsors to understand the value of sponsors to the teams, the roles they most often filled and the challenges they faced as team sponsors. Findings The extent to which the sponsors were perceived as having contributed to the work of the action learning teams varied greatly from team to team. Most sponsors agreed that they were well informed about their role. The roles sponsors most frequently played were to provide the teams with input and support, serve as a liaison to the community and serve as a sounding board, motivator and cheerleader. The most common challenges or barriers team sponsors faced in this role were keeping engaged in the process, adjusting to the role and feeling disconnected from the program. Practical implications This work provides insights for program developers and community foundations who are interested in building the capacity for health leadership by linking community sponsors with emerging leaders engaged in an action learning experience. Originality/value This work begins to fill a gap in the literature. The role of team sponsors has been studied for single organization work teams but there is a void of understanding about the role of sponsors with multi-organizational teams working to improve health while also learning about leadership.

  15. DEVELOPMENT INSTITUTIONS «CULTIVATION» OF INNOVATIVE PROJECTS IN THE CONTEXT OF THE FORMATION OF VENTURE CAPITAL ECOSYSTEM

    Directory of Open Access Journals (Sweden)

    M. N. Dudin

    2016-01-01

    Full Text Available The current state of the Russian economy is characterized as unstable in the background influence of a combination of factors, including which are rooted in a fairly distant past. Delayed impact of these factors is expressed in the fact that the transition to innovation-oriented and environmentally responsible economic growth is difficult in many ways. But, despite this, the Russian economy is strong enough and gained significant development potential. Available reserves and potential accumulated national economies could be realized through the use of a new formation: the institutions 'growing'. This methodical approach, and this practice is well established itself abroad (USA, Japan and many countries of the European Union, it is proposed to use this experience in Russian conditions. The basis for the efficient functioning of the institutions «growing» forms the venture ecosystem. Venture Ecosystem – a specially built set of structural components that define the goals, objectives and directions of development of the system in accordance with its strategic purpose in the economy. In this article defined the concept of venture capital ecosystem, considered the objectives and components of the venture capital ecosystem, the characteristic of the state of the domestic venture capital ecosystem highlighted ways to improve it. Resulting in the conclusions and definitions may be used in the practice of building the institutional venture capital environment, focused on the full support of innovative activity of small and medium-sized businesses. In addition, the conclusions and recommendations contained in the article can be used in the development of normative legal acts, including those aimed at promoting high-tech sectors of the Russian economy.

  16. New Zealand Curriculum Innovation in Historical and Political Context: The Freyberg Integrated Studies Project and Parallel Projects of the 1940s.

    Science.gov (United States)

    McKinnon, David H.; And Others

    1991-01-01

    Describes curricular and pedagogical experimentation in humanities and social studies instruction conducted in New Zealand immediately after World War II. Compares such developments with the Freyberg Integrated Studies Project, a later three-year curriculum development and research program. Concludes that the Freyberg model provides support for…

  17. Knowledge and Continuous Innovation

    DEFF Research Database (Denmark)

    Boer, Harry; Caffyn, S.; Corso, M.

    1999-01-01

    Competition today is forcing companies to increase their effectiveness through exploiting synergy and learning in product innovation. Literature, however, is still mainly focused on how product development projects, seen largely as isolated efforts, should be organised and managed. This article p...... is based on collaborative research by the authors, based on their involvement in the Euro-Australian co-operation project CIMA (Euro-Australian co-operation centre for Continuous Improvement and innovation MAnagement)....

  18. Essence: Facilitating Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2008-01-01

      This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL......) – and a new method concept for software innovation – Essence – based on views, modes, and team roles. Finally, the paper reports from an early experiment using SIRL and Essence and identifies further research....

  19. Innovation in practice, dialogue

    DEFF Research Database (Denmark)

    Reinhard, CarrieLynn D.

    Presentation at the March 19, 2010 project meeting for the Virtual Worlds Research Group.  This presentation is the first report of research conducted in June, 2009, in how the Danish firm Innovation Lab makes sense of innovation as it relates to virtual world technologies.  The method used...... in this study was the focus group, modified using Dervin's Sense-Making Methodology.  This presentation focuses on how the members of Innovation Lab defined what is innovation, with discussion on whether or not having a unified definition within the organization makes the most sense....

  20. 42 CFR 423.401 - General requirements for PDP sponsors.

    Science.gov (United States)

    2010-10-01

    ... sponsor is organized and licensed under State law as a risk bearing entity eligible to offer health insurance or health benefits coverage in each State in which it offers a prescription drug plan. If not... with State Law and Preemption by Federal Law § 423.401 General requirements for PDP sponsors. (a...