WorldWideScience

Sample records for split capacitor psc

  1. Split-phase motor running as capacitor starts motor and as capacitor run motor

    Directory of Open Access Journals (Sweden)

    Yahaya Asizehi ENESI

    2016-07-01

    Full Text Available In this paper, the input parameters of a single phase split-phase induction motor is taken to investigate and to study the output performance characteristics of capacitor start and capacitor run induction motor. The value of these input parameters are used in the design characteristics of capacitor run and capacitor start motor with each motor connected to rated or standard capacitor in series with auxiliary winding or starting winding respectively for the normal operational condition. The magnitude of capacitor that will develop maximum torque in capacitor start motor and capacitor run motor are investigated and determined by simulation. Each of these capacitors is connected to the auxiliary winding of split-phase motor thereby transforming it into capacitor start or capacitor run motor. The starting current and starting torque of the split-phase motor (SPM, capacitor run motor (CRM and capacitor star motor (CSM are compared for their suitability in their operational performance and applications.

  2. Split-phase motor running as capacitor starts motor and as capacitor run motor

    OpenAIRE

    Yahaya Asizehi ENESI; Jacob TSADO; Mark NWOHU; Usman Abraham USMAN; Odu Ayo IMORU

    2016-01-01

    In this paper, the input parameters of a single phase split-phase induction motor is taken to investigate and to study the output performance characteristics of capacitor start and capacitor run induction motor. The value of these input parameters are used in the design characteristics of capacitor run and capacitor start motor with each motor connected to rated or standard capacitor in series with auxiliary winding or starting winding respectively for the normal operational condition. The ma...

  3. The new energy management policy: Indonesian PSC-gross-split applied on steam flooding project

    Science.gov (United States)

    Irham, S.; Julyus, P.

    2018-01-01

    “SIPY” oil field has been producing oil using steam flooding technology since 1992 under the PSC-Cost-Recovery policy. In 2021, the contract will be finished, and a new agreement must be submitted to the Indonesian government. There are two applied fiscal policies on oil and gas management: PSC-Cost-Recovery and PSC-Gross-Split (introduced in 2017 as the new energy management plan). The contractor must choose between PSC-Cost-Recovery and PSC-Gross-split which makes more profit. The aim of this research is to determine the best oil and gas contract policy for the contractor. The methods are calculating contractor cash flow and comparing the Profitability Indexes. The results of this study are (1) Net Present Values for the PSC-Cost-Recovery and the PSC-Gross-Split are 15 MMUS and 61 MMUS, respectively; and (2) Internal Rate of Return values for the PSC-Cost-Recovery and PSC-Gross-Split are 10% and 11%, respectively. The conclusion is that the Net Present Value and Internal Rate of Return of PSC-Gross-Split are greater than those of PSC-Cost-Recovery, but in Pay Out Time of PSC-Gross-split is longer than Pay Out Time in PSC-Cost-Recovery. Thus, the new energy management policy will be more attractive than PSC-Cost-Recovery.

  4. The new management policy: Indonesian PSC-Gross split applied on CO2 flooding project

    Science.gov (United States)

    Irham, S.; Sibuea, S. N.; Danu, A.

    2018-01-01

    “SIAD” oil field will be developed by CO2 flooding. CO2, a famous pollutant gas, is injected into the oil reservoir to optimize the oil recovery. This technique should be conducted economically according to the energy management policy in Indonesia. In general, Indonesia has two policy contracts on oil and gas: the old one is PSC-Cost-Recovery, and the new one is PSC-Gross-Split (introduced in 2017 as the new energy management plan). The contractor must choose between PSC-Cost-Recovery and PSC-Gross-Split which makes more profit. The aim of this paper is to show the best oil and gas contract policy for the contractor. The methods are calculating and comparing the economic indicators. The result of this study are (1) NPV for the PSC-Cost-Recovery is -46 MUS, while for the PSC-Gross-Split is 73 MUS, and (2) IRR for the PSC-Cost-Recovery is 9%, whereas for the PSC-Gross-Split is 11%. The conclusion is that the NPV and IRR for PSC-Gross-Split are greater than the NPV and IRR of PSC-Cost-Recovery, but POT in PSC-Gross-split is longer than POT in PSC-Cost-Recovery. Thus, in this case, the new energy policy contract can be applied for CO2 flooding technology since it yields higher economic indicators than its antecendent.

  5. A Robust DC-Split-Capacitor Power Decoupling Scheme for Single-Phase Converter

    DEFF Research Database (Denmark)

    Yao, Wenli; Loh, Poh Chiang; Tang, Yi

    2017-01-01

    , instead of the usual single dc-link capacitor bank. Methods for regulating this power decoupler have earlier been developed, but almost always with equal capacitances assumed for forming the dc-split capacitor, even though it is not realistic in practice. The assumption should, hence, be evaluated more......Instead of bulky electrolytic capacitors, active power decoupling circuit can be introduced to a single-phase converter for diverting second harmonic ripple away from its dc source or load. One possible circuit consists of a half-bridge and two capacitors in series for forming a dc-split capacitor...... thoroughly, especially when it is shown in the paper that even a slight mismatch can render the power decoupling scheme ineffective and the IEEE 1547 standard to be breached. A more robust compensation scheme is, thus, needed for the dc-split capacitor circuit, as proposed and tested experimentally...

  6. Permanently split capacitor motor-study of the design parameters

    Science.gov (United States)

    Sarac, Vasilija; Stefanov, Goce

    2017-09-01

    Paper analyzes the influence of various design parameters on torque of permanently split capacitor motor. Motor analytical model is derived and it is used for calculating the performance characteristics of basic motor model. The acquired analytical model is applied in optimization software that uses genetic algorithms (GA) as an optimization method. Optimized motor model with increased torque is derived by varying three motor parameters in GA program: winding turns ratio, average air gap flux density and motor stack length. Increase of torque has been achieved for nominal operation but also at motor starting. Accuracy of the derived models is verified by Simulink. The acquired values of several motor parameters from transient characteristics of Simulink models are compared with the corresponding values obtained from analytical models of both motors, basic and optimized. Numerical analysis, based on finite element method (FEM), is also performed for both motor models. As a result of the FEM analysis, magnetic flux density in motor cross-section is calculated and adequate conclusions are derived in relation to core saturation and air gap flux density in both motor models.

  7. Capacitors.

    Science.gov (United States)

    Trotter, Donald M., Jr.

    1988-01-01

    Presents a historical backdrop for a discussion of capacitor design and function. Discusses the production, importance, and function of two types of miniature capacitors; electrolytic and multilayer ceramic capacitors. Describes the function of these miniature capacitors in comparison to the Leyden jar, a basic demonstration of capacitance. (CW)

  8. Linearity Analysis on a Series-Split Capacitor Array for High-Speed SAR ADCs

    Directory of Open Access Journals (Sweden)

    Yan Zhu

    2010-01-01

    Full Text Available A novel Capacitor array structure for Successive Approximation Register (SAR ADC is proposed. This circuit efficiently utilizes charge recycling to achieve high-speed of operation and it can be applied to high-speed and low-to-medium-resolution SAR ADC. The parasitic effects and the static linearity performance, namely, the INL and DNL, of the proposed structure are theoretically analyzed and behavioral simulations are performed to demonstrate its effectiveness under those nonidealities. Simulation results show that to achieve the same conversion performance the proposed capacitor array structure can reduce the average power consumed from the reference ladder by 90% when compared to the binary-weighted splitting capacitor array structure.

  9. New series half-bridge converters with the balance input split capacitor voltages

    Science.gov (United States)

    Lin, Bor-Ren; Chiang, Huann-Keng; Wang, Shang-Lun

    2016-03-01

    This article presents a new dc/dc converter to perform the main functions of zero voltage switching (ZWS), low converter size, high switching frequency and low-voltage stress. Metal-oxide-semiconductor field-effect transistors (MOSFETs) with high switching frequency are used to reduce the converter size and increase circuit efficiency. To overcome low-voltage stress and high turn-on resistance of MOSFETs, the series half-bridge topology is adopted in the proposed converter. Hence, the low-voltage stress MOSFETs can be used for medium-input voltage applications. The asymmetric pulse-width modulation is used to generate the gating signals and achieve the ZWS. On the secondary side, the parallel connection of two diode rectifiers is adopted to reduce the current rating of passive components. On the primary side, the series connection of two transformers is used to balance two output inductor currents. Two flying capacitors are used to automatically balance the input split capacitor voltages. Finally, experiments with 1000 W rated power are performed to verify the theoretical analysis and the effectiveness of proposed converter.

  10. Robust Power Decoupling Control Scheme for DC Side Split Decoupling Capacitor Circuit with Mismatched Capacitance in Single Phase System

    DEFF Research Database (Denmark)

    Yao, Wenli; Loh, Poh Chiang; Tang, Yi

    2016-01-01

    imperfections when storage mismatch occurs, which may break the standard requirement such as IEEE 1547. As a consequence, a robust control scheme is then proposed for half-bridge circuit, which realized power decoupling by generating second order harmonic voltage on the split dc decoupling capacitor instead...

  11. A Performance of the Soft-Charging Operation in Series of Step-Up Power Switched-Capacitor Converters

    Directory of Open Access Journals (Sweden)

    Ayoob Alateeq

    2018-03-01

    Full Text Available Due to their high power density and appropriateness for small circuits integration, switched-capacitor (SC converters have gotten more interests. Applying the soft-charging technique effectively eliminates the current transient that results in a higher power density and a higher fundamental efficiency. Achieving the complete soft-charging operation is impossible by using the conventional control diagram for any SC converter topology. In this paper, we proposed a split-phase control to achieve the complete soft-charging operation in a power switched-capacitor (PSC converter. The proposed control diagram was designed for a 1-to-4 PSC converter (two-level of the PSC converter. The implemented split-phase diagram successfully controls eight switches to exhibit eight modes of operation. In addition to the current transient elimination, the complete soft-charging allows us to reduce capacitor sizes. However, reducing capacitor size negatively increases the output voltage ripple; hence, an output LC filter is needed. The complete soft-charging achievement accomplishes a 96% efficiency due to the lower output impedance and the dead time switching. LT-Spice software has been used to verify the proposed control and the results were compared with hard-charging and incomplete soft-charging operations.

  12. Capacitor-within-Capacitor: Electrically Controlled Capacitors

    OpenAIRE

    Grebel, Haim

    2017-01-01

    Capacitors are typically connected together in one of two configurations: either in series, or in parallel. Here, a new configuration is introduced: a capacitor-within-capacitor (CWC). The overall capacitance of the new structure is larger than an ordinary two-plate capacitor and may be electrically controlled. It thus has implications to electronic circuitry and energy storage elements alike.

  13. Vented Capacitor

    Science.gov (United States)

    Brubaker, Michael Allen; Hosking, Terry Alan

    2006-04-11

    A technique of increasing the corona inception voltage (CIV), and thereby increasing the operating voltage, of film/foil capacitors is described. Intentional venting of the capacitor encapsulation improves the corona inception voltage by allowing internal voids to equilibrate with the ambient environment.

  14. iPSC Core

    Data.gov (United States)

    Federal Laboratory Consortium — The induced Pluripotent Stem Cells (iPSC) Core was created in 2011 to accelerate stem cell research in the NHLBI by providing investigators consultation, technical...

  15. Rotary capacitor

    CERN Multimedia

    1971-01-01

    The rotating wheel of the rotary capacitor representing the most critical part of the new radio-frequency system of the synchro-cyclotron. The three rows of teeth on the circumference of the wheel pass between four rows of stator blades with a minimum clearance of 1 mm at a velocity of 1700 rev/min.

  16. Switchable capacitor

    NARCIS (Netherlands)

    Rottenberg, X.; Jansen, Henricus V.; Tilmans, H.A.C.; De Raedt, W.

    2003-01-01

    A micro electromechanical switchable capacitor is disclosed, comprising a substrate, a bottom elecrode, a dielaectric layer deposited on at least part of sai bottum electrode, a conductive floating electrode deposited on at least part of said dielectric layer, an armature positioned proximate to the

  17. Electrochemical capacitor

    Science.gov (United States)

    Anderson, Marc A.; Liu, Kuo -Chuan; Mohr, Charles M.

    1999-10-05

    An inexpensive porous metal oxide material having high surface area, good conductivity and high specific capacitance is advantageously used in an electrochemical capacitor. The materials are formed in a sol-gel process which affords control over the properties of the resultant metal oxide materials.

  18. Switchable capacitor

    NARCIS (Netherlands)

    Rottenberg, Xavier; Jansen, Henricus V.; Tilmans, H.A.C.; Tilmans, Hendrikus; De Raedt, Walter

    2011-01-01

    A micro electromechanical switchable capacitor is disclosed, comprising a substrate, a bottom elecrode, a dielaectric layer deposited on at least part of sai bottum electrode, a conductive floating electrode deposited on at least part of said dielectric layer, an armature positioned proximate to the

  19. Multilayer capacitors, method for making multilayer capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Beihai; Balachandran, Uthamalingam

    2018-03-06

    The invention provides a stacked capacitor configuration comprising subunits each with a thickness of as low as 20 microns. Also provided is combination capacitor and printed wire board wherein the capacitor is encapsulated by the wire board. The invented capacitors are applicable in micro-electronic applications and high power applications, whether it is AC to DC or DC to AC, or DC to DC.

  20. Capacitor Discharge - A Capacitor Tutorial [video

    OpenAIRE

    Naval Postgraduate School Physics

    2014-01-01

    NPS Physics Physics Demonstrations Here's a capacitor discharge demonstrated by physicist Dr. Dernardo. Dr. D gives a nice capacitor lesson along with some fireworks. Charging and Discharging a Capacitor is dangerous. Do not try this at home. Dr. Bruce Denardo uses eleven 9V batteries, connected in series for a total of 99 creating a pretty large spark.

  1. File list: DNS.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.iPSC_intermediates mm9 DNase-seq Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.10.AllAg.iPSC_intermediates.bed ...

  2. File list: DNS.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.iPSC_intermediates mm9 DNase-seq Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.20.AllAg.iPSC_intermediates.bed ...

  3. File list: DNS.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.iPSC_intermediates mm9 DNase-seq Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.05.AllAg.iPSC_intermediates.bed ...

  4. File list: Oth.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.iPSC_intermediates mm9 TFs and others Pluripotent stem cell iPSC interm...7378,SRX897943,SRX977370,SRX977371,SRX1184107,SRX897941 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.AllAg.iPSC_intermediates.bed ...

  5. File list: ALL.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.iPSC_intermediates mm9 All antigens Pluripotent stem cell iPSC interm...44,SRX897944,SRX1178447,SRX684776,SRX684778,SRX684777,SRX1090865,SRX1090866 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.50.AllAg.iPSC_intermediates.bed ...

  6. File list: Oth.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.AllAg.iPSC_intermediates mm9 TFs and others Pluripotent stem cell iPSC interm...7379,SRX977371,SRX977370,SRX897943,SRX897941,SRX1184107 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.AllAg.iPSC_intermediates.bed ...

  7. File list: Unc.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.05.AllAg.iPSC_intermediates mm9 Unclassified Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.05.AllAg.iPSC_intermediates.bed ...

  8. File list: Oth.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.AllAg.iPSC_intermediates mm9 TFs and others Pluripotent stem cell iPSC interm...7379,SRX977371,SRX977370,SRX897943,SRX1184107,SRX897941 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.AllAg.iPSC_intermediates.bed ...

  9. File list: ALL.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.05.AllAg.iPSC_intermediates mm9 All antigens Pluripotent stem cell iPSC interm...6,SRX1184108,SRX897944,SRX1178447,SRX684778,SRX684777,SRX1090865,SRX1090866 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.05.AllAg.iPSC_intermediates.bed ...

  10. File list: DNS.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.50.AllAg.iPSC_intermediates mm9 DNase-seq Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.50.AllAg.iPSC_intermediates.bed ...

  11. File list: Oth.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.iPSC_intermediates mm9 TFs and others Pluripotent stem cell iPSC interm...7367,SRX977374,SRX897943,SRX977378,SRX1184107,SRX897941 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.iPSC_intermediates.bed ...

  12. File list: ALL.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.iPSC_intermediates mm9 All antigens Pluripotent stem cell iPSC interm...,SRX1178446,SRX1178449,SRX1178447,SRX897944,SRX1090865,SRX684777,SRX1090866 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.10.AllAg.iPSC_intermediates.bed ...

  13. File list: ALL.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.iPSC_intermediates mm9 All antigens Pluripotent stem cell iPSC interm...4,SRX1184108,SRX897944,SRX1178447,SRX684778,SRX1090865,SRX684777,SRX1090866 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.20.AllAg.iPSC_intermediates.bed ...

  14. File list: Unc.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.iPSC_intermediates mm9 Unclassified Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.20.AllAg.iPSC_intermediates.bed ...

  15. File list: Unc.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.iPSC_intermediates mm9 Unclassified Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.50.AllAg.iPSC_intermediates.bed ...

  16. File list: Unc.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.10.AllAg.iPSC_intermediates mm9 Unclassified Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.10.AllAg.iPSC_intermediates.bed ...

  17. File list: Pol.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.iPSC_intermediates mm9 RNA polymerase Pluripotent stem cell iPSC intermedia...e.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.50.AllAg.iPSC_intermediates.bed ...

  18. File list: Pol.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.iPSC_intermediates mm9 RNA polymerase Pluripotent stem cell iPSC intermedia...e.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.20.AllAg.iPSC_intermediates.bed ...

  19. File list: Pol.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.iPSC_intermediates mm9 RNA polymerase Pluripotent stem cell iPSC intermedia...e.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.10.AllAg.iPSC_intermediates.bed ...

  20. File list: Pol.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.iPSC_intermediates mm9 RNA polymerase Pluripotent stem cell iPSC intermedia...e.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.05.AllAg.iPSC_intermediates.bed ...

  1. Embryo splitting

    OpenAIRE

    Karl Illmensee; Mike Levanduski

    2010-01-01

    Mammalian embryo splitting has successfully been established in farm animals. Embryo splitting is safely and efficiently used for assisted reproduction in several livestock species. In the mouse, efficient embryo splitting as well as single blastomere cloning have been developed in this animal system. In nonhuman primates embryo splitting has resulted in several pregnancies. Human embryo splitting has been reported recently. Microsurgical embryo splitting under Institutional Review Board appr...

  2. Embryo splitting

    Directory of Open Access Journals (Sweden)

    Karl Illmensee

    2010-04-01

    Full Text Available Mammalian embryo splitting has successfully been established in farm animals. Embryo splitting is safely and efficiently used for assisted reproduction in several livestock species. In the mouse, efficient embryo splitting as well as single blastomere cloning have been developed in this animal system. In nonhuman primates embryo splitting has resulted in several pregnancies. Human embryo splitting has been reported recently. Microsurgical embryo splitting under Institutional Review Board approval has been carried out to determine its efficiency for blastocyst development. Embryo splitting at the 6–8 cell stage provided a much higher developmental efficiency compared to splitting at the 2–5 cell stage. Embryo splitting may be advantageous for providing additional embryos to be cryopreserved and for patients with low response to hormonal stimulation in assisted reproduction programs. Social and ethical issues concerning embryo splitting are included regarding ethics committee guidelines. Prognostic perspectives are presented for human embryo splitting in reproductive medicine.

  3. Towards Prognostics of Electrolytic Capacitors

    Data.gov (United States)

    National Aeronautics and Space Administration — A remaining useful life prediction algorithm and degradation model for electrolytic capacitors is presented. Electrolytic capacitors are used in several applications...

  4. Modeling and simulation of GaN step-up power switched capacitor converter

    Science.gov (United States)

    Alateeq, Ayoob S.; Almalaq, Yasser A.; Matin, Mohammad A.

    2017-08-01

    This paper discusses a proposed DC-DC switched capacitor converter for low voltage electronic products. The proposed converter is a two-level power switched capacitor (PSC) which is a boost converter. The suitability to convert a voltage into four times higher than its input is one of the converter's objectives. Because of the proposed two-level PSC consist of eight switches and five capacitors, it occupies a small area of the electronic products. The eight switches were selected to be GaN transistors to maintain the efficiency at high rated power or high temperatures. The LTSpice simulator was used to test the proposed model. Since the design contains semiconductor elements such (GaN transistor), then 10% error is a reasonable variance between the mathematical and simulation results.

  5. Analysis list: Psc [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Psc Cell line,Embryo + dm3 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/Ps...c.1.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/target/Psc.5.tsv http://dbarchive.biosciencedbc.jp/ky...ushu-u/dm3/target/Psc.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/colo/Psc.Cell_line.tsv,http://dbarchive.bioscience...dbc.jp/kyushu-u/dm3/colo/Psc.Embryo.tsv http://dbarchive.bioscience...dbc.jp/kyushu-u/dm3/colo/Cell_line.gml,http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/colo/Embryo.gml ...

  6. Capacitor discharge engineering

    CERN Document Server

    Früngel, Frank B A

    1976-01-01

    High Speed Pulse Technology, Volume III: Capacitor Discharge Engineering covers the production and practical application of capacitor dischargers for the generation and utilization of high speed pulsed of energy in different forms. This nine-chapter volume discusses the principles of electric current, voltage, X-rays, gamma rays, heat, beams of electrons, neutrons and ions, magnetic fields, sound, and shock waves in gases and liquids. Considerable chapters consider the applications of capacitor discharges, such as impulse hardening of steel, ultrapulse welding of precision parts, X-ray flash t

  7. Electrochemical flow capacitors

    Science.gov (United States)

    Gogotsi, Yury; Presser, Volker; Kumbur, Emin Caglan

    2015-10-27

    The present invention generally relates to devices for energy storage technologies, and more particularly to electrochemical flow capacitor systems and applications. In some aspects, these flow capacitors have at least one electrode comprising a non-stationary solid or semi-solid composition comprising supercapacitive particles and an electrolytic solvent in electrical communication with at least one current collector, and energy is stored and/or released by charging and/or discharging the electrode(s).

  8. Miniaturized Planar Split-Ring Resonator Antenna

    DEFF Research Database (Denmark)

    Kim, Oleksiy S.; Breinbjerg, Olav

    2009-01-01

    A miniaturized planar antenna based on a broadside-coupled split ring resonator excited by an arc-shaped dipole is presented. The excitation dipole acts as a small tuning capacitor in series with a parallel RLC circuit represented by the SRR. The antenna resonance frequency and dimensions...

  9. File list: InP.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.50.AllAg.iPSC_intermediates mm9 Input control Pluripotent stem cell iPSC interm...178448,SRX1178449,SRX1184108,SRX1178444,SRX897944,SRX1178447 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.50.AllAg.iPSC_intermediates.bed ...

  10. File list: InP.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.10.AllAg.iPSC_intermediates mm9 Input control Pluripotent stem cell iPSC interm...184108,SRX1178445,SRX1178446,SRX1178449,SRX1178447,SRX897944 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.10.AllAg.iPSC_intermediates.bed ...

  11. File list: InP.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.AllAg.iPSC_intermediates mm9 Input control Pluripotent stem cell iPSC interm...178446,SRX1178444,SRX1178449,SRX1184108,SRX897944,SRX1178447 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.20.AllAg.iPSC_intermediates.bed ...

  12. File list: NoD.PSC.50.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.50.AllAg.iPSC_intermediates mm9 No description Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.50.AllAg.iPSC_intermediates.bed ...

  13. File list: NoD.PSC.10.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.iPSC_intermediates mm9 No description Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.iPSC_intermediates.bed ...

  14. File list: InP.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.05.AllAg.iPSC_intermediates mm9 Input control Pluripotent stem cell iPSC interm...178445,SRX1178449,SRX1178446,SRX1184108,SRX897944,SRX1178447 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.05.AllAg.iPSC_intermediates.bed ...

  15. File list: NoD.PSC.05.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.iPSC_intermediates mm9 No description Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.05.AllAg.iPSC_intermediates.bed ...

  16. File list: NoD.PSC.20.AllAg.iPSC_intermediates [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.20.AllAg.iPSC_intermediates mm9 No description Pluripotent stem cell iPSC interm...ediates http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.20.AllAg.iPSC_intermediates.bed ...

  17. Control Strategy of Two Capacitor Voltages for Separate MPPTs in Photovoltaic Systems Using Neutral-Point-Clamped Inverters

    DEFF Research Database (Denmark)

    Choi, Ui-Min; Blaabjerg, Frede; Lee, Kyo-Beum

    2015-01-01

    and panel mismatch conditions. In this system, if PV modules are separately connected to the split capacitor voltage, the MPPT efficiency can be improved by the proposed control strategy. By the proposed method, the two capacitor voltages can be controlled asymmetrically to perform the separate MPPTs...

  18. The Structure of PrPSc Prions

    Directory of Open Access Journals (Sweden)

    Holger Wille

    2018-02-01

    Full Text Available PrPSc (scrapie isoform of the prion protein prions are the infectious agent behind diseases such as Creutzfeldt–Jakob disease in humans, bovine spongiform encephalopathy in cattle, chronic wasting disease in cervids (deer, elk, moose, and reindeer, as well as goat and sheep scrapie. PrPSc is an alternatively folded variant of the cellular prion protein, PrPC, which is a regular, GPI-anchored protein that is present on the cell surface of neurons and other cell types. While the structure of PrPC is well studied, the structure of PrPSc resisted high-resolution determination due to its general insolubility and propensity to aggregate. Cryo-electron microscopy, X-ray fiber diffraction, and a variety of other approaches defined the structure of PrPSc as a four-rung β-solenoid. A high-resolution structure of PrPSc still remains to be solved, but the four-rung β-solenoid architecture provides a molecular framework for the autocatalytic propagation mechanism that gives rise to the alternative conformation of PrPSc. Here, we summarize the current knowledge regarding the structure of PrPSc and speculate about the molecular conversion mechanisms that leads from PrPC to PrPSc.

  19. Capacitor Hardness Demonstration Program.

    Science.gov (United States)

    1983-08-01

    resulted in the development of a prototype all-film capacitor using polyvinylidene fluoride (PVDF) manufactured by the Kureha Corporation. This is a...of dielectric film. Check for imperfections, such as scratches and high molecular weight gels. The film presently coming from Kureha is of poor...PVDF film obtained from Kureha . AFRPL will be apprised of this qualifi- cation procedure. 2. AFRPL will issue a change order to redirect the program

  20. On the kinematic age of RZ Psc

    Science.gov (United States)

    Potravnov, I. S.; Grinin, V. P.

    2013-11-01

    RZ Psc belongs to the family of young UX Ori stars whose photometric activity is due to strong extinction variations in the circumstellar disks surrounding them. However, in contrast to all the remaining stars of this type, no evidence of youth has been detected for RZ Psc until recently. A rough estimate of the star's kinematic age was made for the first time in our previous paper (Grinin et al. 2010). It shows that RZ Psc is intermediate in its evolutionary status between young stars in Orion and stars with debris disks. In this paper, we provide a refined estimate of the kinematic age for the star confirming this conclusion. According to this estimate, the age of RZ Psc is approximately 25 ± 5 Myr at M * = 1 M ⊙.

  1. Effect of Ferrite Magnetic Wedge on Characteristics of Capacitor Motor under Asymmetrical Voltage Application

    Science.gov (United States)

    Kaga, Akio; Tajima, Katsubumi; Itoh, Tadahito; Yohkawa, Norihiko

    1995-04-01

    The characteristics of the capacitor motor under voltage control are highly applicable to home electric appliances. In this study, the supply voltage controlled by a triac has been applied to a split-phase capacitor motor. The capacitor motor usually produces an oscillative torque with a double supply frequency. When asymmetrical voltages controlled by the triacs are applied to the motor, the voltage and current behaviors are distorted. The authors have proposed a countermeasure of the insertion of ferrite magnetic wedges into the motor slot openings to smooth the flux density pulsation across the air gap. As a result, some significant relationships have been obtained.

  2. Capacitor assembly and related method of forming

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Lili; Tan, Daniel Qi; Sullivan, Jeffrey S.

    2017-12-19

    A capacitor assembly is disclosed. The capacitor assembly includes a housing. The capacitor assembly further includes a plurality of capacitors disposed within the housing. Furthermore, the capacitor assembly includes a thermally conductive article disposed about at least a portion of a capacitor body of the capacitors, and in thermal contact with the capacitor body. Moreover, the capacitor assembly also includes a heat sink disposed within the housing and in thermal contact with at least a portion of the housing and the thermally conductive article such that the heat sink is configured to remove heat from the capacitor in a radial direction of the capacitor assembly. Further, a method of forming the capacitor assembly is also presented.

  3. A Simple, Successful Capacitor Lab

    Science.gov (United States)

    Ennis, William

    2011-01-01

    Capacitors are a fundamental component of modern electronics. They appear in myriad devices and in an enormous range of sizes. Although our students are taught the function and analysis of capacitors, few have the opportunity to use them in our labs.

  4. Protection of large capacitor banks

    International Nuclear Information System (INIS)

    Sprott, J.C.; Lovell, T.W.

    1982-06-01

    Large capacitor banks, as used in many pulsed plasma experiments, are subject to catastrophic failure in the event of a short in the output or in an individual capacitor. Methods are described for protecting such banks to minimize the damage and down-time caused by such a failure

  5. Splitting Descartes

    DEFF Research Database (Denmark)

    Schilhab, Theresa

    2007-01-01

    Kognition og Pædagogik vol. 48:10-18. 2003 Short description : The cognitivistic paradigm and Descartes' view of embodied knowledge. Abstract: That the philosopher Descartes separated the mind from the body is hardly news: He did it so effectively that his name is forever tied to that division....... But what exactly is Descartes' point? How does the Kartesian split hold up to recent biologically based learning theories?...

  6. Fractal Structures For Mems Variable Capacitors

    KAUST Repository

    Elshurafa, Amro M.

    2014-08-28

    In accordance with the present disclosure, one embodiment of a fractal variable capacitor comprises a capacitor body in a microelectromechanical system (MEMS) structure, wherein the capacitor body has an upper first metal plate with a fractal shape separated by a vertical distance from a lower first metal plate with a complementary fractal shape; and a substrate above which the capacitor body is suspended.

  7. Ferroelectric Fractional-Order Capacitors

    KAUST Repository

    Agambayev, Agamyrat

    2017-07-25

    Poly(vinylidene fluoride)-based polymers and their blends are used to fabricate electrostatic fractional-order capacitors. This simple but effective method allows us to precisely tune the constant phase angle of the resulting fractional-order capacitor by changing the blend composition. Additionally, we have derived an empirical relation between the ratio of the blend constituents and the constant phase angle to facilitate the design of a fractional order capacitor with a desired constant phase angle. The structural composition of the fabricated blends is investigated using Fourier transform infrared spectroscopy and X-ray diffraction techniques.

  8. Stacked Switched Capacitor Energy Buffer Architecture

    OpenAIRE

    Chen, Minjie; Perreault, David J.; Afridi, Khurram

    2012-01-01

    Electrolytic capacitors are often used for energy buffering applications, including buffering between single-phase ac and dc. While these capacitors have high energy density compared to film and ceramic capacitors, their life is limited. This paper presents a stacked switched capacitor (SSC) energy buffer architecture and some of its topological embodiments, which when used with longer life film capacitors overcome this limitation while achieving effective energy densities comparable to elect...

  9. Fractal Structures For Fixed Mems Capacitors

    KAUST Repository

    Elshurafa, Amro M.

    2014-08-28

    An embodiment of a fractal fixed capacitor comprises a capacitor body in a microelectromechanical system (MEMS) structure. The capacitor body has a first plate with a fractal shape separated by a horizontal distance from a second plate with a fractal shape. The first plate and the second plate are within the same plane. Such a fractal fixed capacitor further comprises a substrate above which the capacitor body is positioned.

  10. Mutual capacitor and its applications

    Directory of Open Access Journals (Sweden)

    Chun Li

    2014-06-01

    Full Text Available This study presents a new ac circuit element – the mutual capacitor, being a dual of the mutual inductor, which is also a new ac transformer. This element is characteristic of the mutual-capacitance coupling of a multi-capacitance system. A unity-coupled mutual capacitor works as an ideal current or voltage transformer, and incidentally acts as waveform separating when inductor employed or waveform converting from square-wave to quasi-sine or waveform filtering, between ports. As a transformer, the mutual capacitor is easy to design, easy for heat cooling, more accurate for current or voltage transformation, dissipating less energy as well as saving materials, suitable for high-power and high-voltage applications. Experiments to demonstrate performances of unity-coupled mutual capacitors are also given.

  11. Ferroelectric capacitor with reduced imprint

    Science.gov (United States)

    Evans, Jr., Joseph T.; Warren, William L.; Tuttle, Bruce A.; Dimos, Duane B.; Pike, Gordon E.

    1997-01-01

    An improved ferroelectric capacitor exhibiting reduced imprint effects in comparison to prior art capacitors. A capacitor according to the present invention includes top and bottom electrodes and a ferroelectric layer sandwiched between the top and bottom electrodes, the ferroelectric layer comprising a perovskite structure of the chemical composition ABO.sub.3 wherein the B-site comprises first and second elements and a dopant element that has an oxidation state greater than +4. The concentration of the dopant is sufficient to reduce shifts in the coercive voltage of the capacitor with time. In the preferred embodiment of the present invention, the ferroelectric element comprises Pb in the A-site, and the first and second elements are Zr and Ti, respectively. The preferred dopant is chosen from the group consisting of Niobium, Tantalum, and Tungsten. In the preferred embodiment of the present invention, the dopant occupies between 1 and 8% of the B-sites.

  12. High density energy storage capacitor

    International Nuclear Information System (INIS)

    Whitham, K.; Howland, M.M.; Hutzler, J.R.

    1979-01-01

    The Nova laser system will use 130 MJ of capacitive energy storage and have a peak power capability of 250,000 MW. This capacitor bank is a significant portion of the laser cost and requires a large portion of the physical facilities. In order to reduce the cost and volume required by the bank, the Laser Fusion Program funded contracts with three energy storage capacitor producers: Aerovox, G.E., and Maxwell Laboratories, to develop higher energy density, lower cost energy storage capacitors. This paper describes the designs which resulted from the Aerovox development contract, and specifically addresses the design and initial life testing of a 12.5 kJ, 22 kV capacitor with a density of 4.2 J/in 3 and a projected cost in the range of 5 cents per joule

  13. Efficiency Improvement of Capacitor Operation

    Directory of Open Access Journals (Sweden)

    V. P. Kashcheev

    2010-01-01

    Full Text Available A system of modernized capacitor ball-cleaning that prevents formation of depositions on internal capacitor tube surface has been developed in the paper.The system has been introduced at the Minsk TPP-4 (Power Block No.5. The paper presupposes that the economic effect will be nearly 0.43 million US dollars per year at one poer block with turbine Т-250/300-240.

  14. PLZT capacitor on glass substrate

    Science.gov (United States)

    Fairchild, M. Ray; Taylor, Ralph S.; Berlin, Carl W.; Wong, Celine W. K.; Ma, Beihai; Balachandran, Uthamalingam

    2016-01-05

    A lead-lanthanum-zirconium-titanate (PLZT) capacitor on a substrate formed of glass. The first metallization layer is deposited on a top side of the substrate to form a first electrode. The dielectric layer of PLZT is deposited over the first metallization layer. The second metallization layer deposited over the dielectric layer to form a second electrode. The glass substrate is advantageous as glass is compatible with an annealing process used to form the capacitor.

  15. Recombinant PrPSc shares structural features with brain-derived PrPSc: Insights from limited proteolysis.

    Science.gov (United States)

    Sevillano, Alejandro M; Fernández-Borges, Natalia; Younas, Neelam; Wang, Fei; R Elezgarai, Saioa; Bravo, Susana; Vázquez-Fernández, Ester; Rosa, Isaac; Eraña, Hasier; Gil, David; Veiga, Sonia; Vidal, Enric; Erickson-Beltran, Melissa L; Guitián, Esteban; Silva, Christopher J; Nonno, Romolo; Ma, Jiyan; Castilla, Joaquín; R Requena, Jesús

    2018-01-01

    Very solid evidence suggests that the core of full length PrPSc is a 4-rung β-solenoid, and that individual PrPSc subunits stack to form amyloid fibers. We recently used limited proteolysis to map the β-strands and connecting loops that make up the PrPSc solenoid. Using high resolution SDS-PAGE followed by epitope analysis, and mass spectrometry, we identified positions ~116/118, 133-134, 141, 152-153, 162, 169 and 179 (murine numbering) as Proteinase K (PK) cleavage sites in PrPSc. Such sites likely define loops and/or borders of β-strands, helping us to predict the threading of the β-solenoid. We have now extended this approach to recombinant PrPSc (recPrPSc). The term recPrPSc refers to bona fide recombinant prions prepared by PMCA, exhibiting infectivity with attack rates of ~100%. Limited proteolysis of mouse and bank vole recPrPSc species yielded N-terminally truncated PK-resistant fragments similar to those seen in brain-derived PrPSc, albeit with varying relative yields. Along with these fragments, doubly N- and C-terminally truncated fragments, in particular ~89/97-152, were detected in some recPrPSc preparations; similar fragments are characteristic of atypical strains of brain-derived PrPSc. Our results suggest a shared architecture of recPrPSc and brain PrPSc prions. The observed differences, in particular the distinct yields of specific PK-resistant fragments, are likely due to differences in threading which result in the specific biochemical characteristics of recPrPSc. Furthermore, recombinant PrPSc offers exciting opportunities for structural studies unachievable with brain-derived PrPSc.

  16. Lithium-Sulfur Capacitors.

    Science.gov (United States)

    Kim, Mok-Hwa; Kim, Hyun-Kyung; Xi, Kai; Kumar, R Vasant; Jung, Dae Soo; Kim, Kwang-Bum; Roh, Kwang Chul

    2018-02-21

    Although many existing hybrid energy storage systems demonstrate promising electrochemical performances, imbalances between the energies and kinetics of the two electrodes must be resolved to allow their widespread commercialization. As such, the development of a new class of energy storage systems is a particular challenge, since future systems will require a single device to provide both a high gravimetric energy and a high power density. In this context, we herein report the design of novel lithium-sulfur capacitors. The resulting asymmetric systems exhibited energy densities of 23.9-236.4 Wh kg -1 and power densities of 72.2-4097.3 W kg -1 , which are the highest reported values for an asymmetric system to date. This approach involved the use of a prelithiated anode and a hybrid cathode material exhibiting anion adsorption-desorption in addition to the electrochemical reduction and oxidation of sulfur at almost identical rates. This novel strategy yielded both high energy and power densities, and therefore establishes a new benchmark for hybrid systems.

  17. Electromechanical capacitor for energy transfer

    International Nuclear Information System (INIS)

    Carroll, T.A.; Chowdhuri, P.; Marshall, J.

    1983-01-01

    Inductive energy transfer between two magnets can be achieved with almost 100% efficiency with a transfer capacitor. However, the bulk and cost will be high, and reliability low if conventional capacitors are used. A homopolar machine, used as a capacitor, will be compact and economical. A homopolar machine was designed with counter-rotating copper disks completely immersed in a liquid metal (NaK-78) to work as a pulse capacitor. Absence of solid-brush collectors minimized wear and frictional losses. Wetting of the copper disks throughout the periphery by the liquid metal minimized the resistive losses at the collector interface. A liquid-metal collector would, however, introduce hydrodynamic and magnetohydrodynamic losses. The selected liquid metal, e.g., NaK-78 will produce the lowest of such losses among the available liquid metals. An electromechanical capacitor of this design was tested at various dc magnetic fields. Its measured capacitance was about 100 farads at a dc magnetic field of 1.15 tesla

  18. Shapeable short circuit resistant capacitor

    Science.gov (United States)

    Taylor, Ralph S.; Myers, John D.; Baney, William J.

    2015-10-06

    A ceramic short circuit resistant capacitor that is bendable and/or shapeable to provide a multiple layer capacitor that is extremely compact and amenable to desirable geometries. The capacitor that exhibits a benign failure mode in which a multitude of discrete failure events result in a gradual loss of capacitance. Each event is a localized event in which localized heating causes an adjacent portion of one or both of the electrodes to vaporize, physically cleaning away electrode material from the failure site. A first metal electrode, a second metal electrode, and a ceramic dielectric layer between the electrodes are thin enough to be formed in a serpentine-arrangement with gaps between the first electrode and the second electrode that allow venting of vaporized electrode material in the event of a benign failure.

  19. Radial Velocity Fluctuations of RZ Psc

    Science.gov (United States)

    Potravnov, I. S.; Gorynya, N. A.; Grinin, V. P.; Minikulov, N. Kh.

    2014-12-01

    The behavior of the radial velocity of the UX Ori type star RZ Psc is studied. The existence of an inner cavity with a radius of about 0.7 a.u. in the circumstellar disk of this star allows to suggest the presence of a companion. A study of the radial velocity of RZ Psc based on our own measurements and published data yields no periodic component in its variability. The two most accurate measurements of V r , based on high resolution spectra obtained over a period of three months, show that the radial velocity is constant over this time interval to within 0.5 km/s. This imposes a limit of M p ≤10 M Jup on the mass of the hypothetical companion. Possible reasons for the observed strong fluctuations in the radial velocity of this star are discussed.

  20. Structural studies of PrPSc

    OpenAIRE

    Vázquez Fernández, Ester

    2013-01-01

    Elucidation of the structure of PrPSc continues to be one major challenge in prion research. Molecular basis of the biology of prion protein, such as the molecular mechanism of prion replication and aggregation, the species barrier and the pathogenesis of neurodegeneration will not be understood until the structure is solved. Given that high-resolution techniques such as NMR or X-ray crystallography cannot be used, a number of lower resolution analytical approaches have been attempted.

  1. Super Capacitor Development At NASA MSFC

    Science.gov (United States)

    Hall, David K.

    2000-01-01

    A viewgraph presentation outlines super capacitor development at NASA Marshall Space Flight Center. The concept, proof of concept testing and the test set-ups are described. An overview of super capacitor classification is shown and several types of capacitors are detailed: Ni-C chemical double layer (CDL), Ru-Oxide pseudo-cap, and a Ru-Oxide 2 F 30 V capacitor.

  2. Super miniaturization of film capacitor dielectrics

    Science.gov (United States)

    Lavene, B.

    1981-01-01

    The alignment of the stable electrical characteristics of film capacitors in the physical dimensions of ceramic and tantalum capacitors are discussed. The reliability of polycarbonate and mylar capacitors are described with respect to their compatibility with military specifications. Graphic illustrations are presented which show electrical and physical comparisons of film, ceramic, and tantalum capacitors. The major focus is on volumetric efficiency, weight reduction, and electrical stability.

  3. Power electronic converters without electrolytic capacitors

    OpenAIRE

    Van den Bossche, Alex; Haddad, Salim; Mordjaoui, Mourad

    2017-01-01

    Power electronic converters may have a quite long lifetime, but some applications such as converters for automotive and photovoltaic could even desire a longer life. One of the elements to increase the lifetime of converters is to avoid electrolytic capacitors, They can be replaced by metalized film capacitors or ceramic capacitors. A lot of converter types can be re-designed to use them, but it influences the way of designing, as a lower capacitance value is used. Electrolytic capacitors are...

  4. Integrated capacitor arrangement for ultrahigh capacitance values

    NARCIS (Netherlands)

    Roozeboom, F.; Klootwijk, J.H.; Kemmeren, A.L.A.M.; Reefman, D.; Verhoeven, J.F.C.M.

    2011-01-01

    An electronic device includes at least one trench capacitor that can also take the form of an inverse structure, a pillar capacitor. An alternating layer sequence of at least two dielectric layers and at least two electrically conductive layers is provided in the trench capacitor or on the pillar

  5. High Energy Density Cryogenic Capacitors

    Science.gov (United States)

    2006-07-07

    used to facilitate the melt- extrusion process or provide the extruded film with desirable mechanical properties, which in turn degrade their electrical...96 1 7.2.2 COTS Materials ( Polypropylene and Polyester) .................................. 97 7.2.3...18 Fig. 2-7. DC life test of COTS capacitors with metallized polypropylene system shows substantial increase in

  6. Compositionally Graded Multilayer Ceramic Capacitors.

    Science.gov (United States)

    Song, Hyun-Cheol; Zhou, Jie E; Maurya, Deepam; Yan, Yongke; Wang, Yu U; Priya, Shashank

    2017-09-27

    Multilayer ceramic capacitors (MLCC) are widely used in consumer electronics. Here, we provide a transformative method for achieving high dielectric response and tunability over a wide temperature range through design of compositionally graded multilayer (CGML) architecture. Compositionally graded MLCCs were found to exhibit enhanced dielectric tunability (70%) along with small dielectric losses (design of miniature filters and power converters.

  7. Nanostructured Electrode Materials for Electrochemical Capacitor Applications.

    Science.gov (United States)

    Choi, Hojin; Yoon, Hyeonseok

    2015-06-02

    The advent of novel organic and inorganic nanomaterials in recent years, particularly nanostructured carbons, conducting polymers, and metal oxides, has enabled the fabrication of various energy devices with enhanced performance. In this paper, we review in detail different nanomaterials used in the fabrication of electrochemical capacitor electrodes and also give a brief overview of electric double-layer capacitors, pseudocapacitors, and hybrid capacitors. From a materials point of view, the latest trends in electrochemical capacitor research are also discussed through extensive analysis of the literature and by highlighting notable research examples (published mostly since 2013). Finally, a perspective on next-generation capacitor technology is also given, including the challenges that lie ahead.

  8. PSC Matrix for Active GSA Schedules and GSA GWACs

    Data.gov (United States)

    General Services Administration — The Product Service Codes (PSC) and North American Industrial Classification Systems (NAICS) are the two methods the Federal government classifies contracts. They...

  9. Plasminogen: A cellular protein cofactor for PrPSc propagation

    OpenAIRE

    Mays, Charles E; Ryou, Chongsuk

    2011-01-01

    The biochemical essence of prion replication is the molecular multiplication of the disease-associated misfolded isoform of prion protein (PrP), termed PrPSc, in a nucleic acid-free manner. PrPSc is generated by the protein misfolding process facilitated by conformational conversion of the host-encoded cellular PrP to PrPSc. Evidence suggests that an auxiliary factor may play a role in PrPSc propagation. We and others previously discovered that plasminogen interacts with PrP, while its functi...

  10. Electrically Variable or Programmable Nonvolatile Capacitors

    Science.gov (United States)

    Shangqing, Liu; NaiJuan, Wu; Ignatieu, Alex; Jianren, Li

    2009-01-01

    Electrically variable or programmable capacitors based on the unique properties of thin perovskite films are undergoing development. These capacitors show promise of overcoming two important deficiencies of prior electrically programmable capacitors: Unlike in the case of varactors, it is not necessary to supply power continuously to make these capacitors retain their capacitance values. Hence, these capacitors may prove useful as components of nonvolatile analog and digital electronic memories. Unlike in the case of ferroelectric capacitors, it is possible to measure the capacitance values of these capacitors without changing the values. In other words, whereas readout of ferroelectric capacitors is destructive, readout of these capacitors can be nondestructive. A capacitor of this type is a simple two terminal device. It includes a thin film of a suitable perovskite as the dielectric layer, sandwiched between two metal or metal oxide electrodes (for example, see Figure 1). The utility of this device as a variable capacitor is based on a phenomenon, known as electrical-pulse-induced capacitance (EPIC), that is observed in thin perovskite films and especially in those thin perovskite films that exhibit the colossal magnetoresistive (CMR) effect. In EPIC, the application of one or more electrical pulses that exceed a threshold magnitude (typically somewhat less than 1 V) gives rise to a nonvolatile change in capacitance. The change in capacitance depends on the magnitude duration, polarity, and number of pulses. It is not necessary to apply a magnetic field or to cool the device below (or heat it above) room temperature to obtain EPIC. Examples of suitable CMR perovskites include Pr(1-x)Ca(x)MnO3, La(1-x)S-r(x)MnO3,and Nb(1-x)Ca(x)MnO3. Figure 2 is a block diagram showing an EPIC capacitor connected to a circuit that can vary the capacitance, measure the capacitance, and/or measure the resistance of the capacitor.

  11. Characterization of Tantalum Polymer Capacitors

    Science.gov (United States)

    Spence, Penelope

    2012-01-01

    Overview Reviewed data Caution must be taken when accelerating test conditions Data not useful to establish an acceleration model Introduction of new failure mechanism skewing results Evidence of Anti-Wear-Out De-doping of polymer Decreased capacitance Increased ESR Not dielectric breakdown Needs further investigation Further investigation into tantalum polymer capacitor technology Promising acceleration model for Manufacturer A Possibility for use in high-reliability space applications with suitable voltage derating.

  12. Switched-Capacitor Voltage Multiplier

    Science.gov (United States)

    Sridharan, Govind

    1991-01-01

    Dc-to-dc power converter multiplies input supply potential by factor of nearly 40. Design does not make use of transformers or inductors but effects voltage boost-up by capacitive energy transfer. Circuit primarily made up of banks of capacitors, connected by network of integrated-circuit relays. Converter functionally linear voltage amplifier with fixed gain figure. Bipolar in operation. Output fully floating, and excellent dc isolation between input and output terminals.

  13. Charging/Safety-Interlock Connection For Capacitor Bank

    Science.gov (United States)

    Rippel, Wally E.

    1990-01-01

    Electrically controlled mechanical interlock apparatus prevents connection of bank of capacitors to battery or other dc power supply until capacitors precharged to nearly full supply voltage. Precharge eliminates excessive inrush current, which damages capacitors, wires, or connectors. Circuit in apparatus also discharges capacitors after power turned off or capacitors disconnected from power supply.

  14. A Two-terminal Active Capacitor

    DEFF Research Database (Denmark)

    Wang, Haoran; Wang, Huai

    2017-01-01

    This letter proposes a concept of two-terminal active capacitor implemented by power semiconductor switches and passive elements. The active capacitor has the same level of convenience as a passive one with two power terminals only. It is application independent and can be specified by rated...... voltage, ripple current, equivalent series resistance, and operational frequency range. The concept, control method, self-power scheme, and impedance characteristics of the active capacitor are presented. A case study of the proposed active capacitor for a capacitive DC-link application is discussed....... The results reveal a significantly lower overall energy storage of passive elements and a reduced cost to fulfill a specific reliability target, compared to a passive capacitor solution. Proof-of-concept experimental results are given to verify the functionality of the proposed capacitor....

  15. PK-sensitive PrPSc is infectious and shares basic structural features with PK-resistant PrPSc

    Science.gov (United States)

    One of the main characteristics of the transmissible isoform of the prion protein (PrPSc) is its partial resistance to proteinase K (PK) digestion. Diagnosis of prion disease typically relies upon immunodetection of PK-digested PrPSc following Western blot or ELISA. More recently, researchers determ...

  16. Capacitors with low equivalent series resistance

    Science.gov (United States)

    Fleig, Patrick Franz (Inventor); Lakeman, Charles D. E. (Inventor); Fuge, Mark (Inventor)

    2011-01-01

    An electric double layer capacitor (EDLC) in a coin or button cell configuration having low equivalent series resistance (ESR). The capacitor comprises mesh or other porous metal that is attached via conducting adhesive to one or both the current collectors. The mesh is embedded into the surface of the adjacent electrode, thereby reducing the interfacial resistance between the electrode and the current collector, thus reducing the ESR of the capacitor.

  17. Low-Inductance Capacitor For Low Temperatures

    Science.gov (United States)

    Rhodes, David B.; Jones, Stephen B.; Franke, John M.

    1989-01-01

    Planar capacitor made on epoxy/fiberglass printed-circuit board. Planar design and flat copper plates ensure low inductance and low series resistance. Planar construction minimized effects of thermal contraction, and epoxy/fiberglass substrate ensured high breakdown voltage. Design is simple, and this type of capacitor easy for any printed-circuit-board facility to fabricate. Design suitable for any small-capacitance, high-voltage capacitor, whether operating at low or high temperature.

  18. Nanostructured Electrode Materials for Electrochemical Capacitor Applications

    OpenAIRE

    Hojin Choi; Hyeonseok Yoon

    2015-01-01

    The advent of novel organic and inorganic nanomaterials in recent years, particularly nanostructured carbons, conducting polymers, and metal oxides, has enabled the fabrication of various energy devices with enhanced performance. In this paper, we review in detail different nanomaterials used in the fabrication of electrochemical capacitor electrodes and also give a brief overview of electric double-layer capacitors, pseudocapacitors, and hybrid capacitors. From a materials point of view, t...

  19. Capacitor discharges, magnetohydrodynamics, X-rays, ultrasonics

    CERN Document Server

    Früngel, Frank B A

    1965-01-01

    High Speed Pulse Technology, Volume 1: Capacitor Discharges - Magnetohydrodynamics - X-Rays - Ultrasonics deals with the theoretical and engineering problems that arise in the capacitor discharge technique.This book discusses the characteristics of dielectric material, symmetrical switch tubes with mercury filling, and compensation conductor forms. The transformed discharge for highest current peaks, ignition transformer for internal combustion engines, and X-ray irradiation of subjects in mechanical motion are also elaborated. This text likewise covers the transformed capacitor discharge in w

  20. Charging Capacitors According to Maxwell's Equations: Impossible

    OpenAIRE

    Funaro, Daniele

    2014-01-01

    The charge of an ideal parallel capacitor leads to the resolution of the wave equation for the electric field with prescribed initial conditions and boundary constraints. Independently of the capacitor's shape and the applied voltage, none of the corresponding solutions is compatible with the full set of Maxwell's equations. The paradoxical situation persists even by weakening boundary conditions, resulting in the impossibility to describe a trivial phenomenon such as the capacitor's charging...

  1. Evaluation of Polymer Hermetically Sealed Tantalum Capacitors

    Science.gov (United States)

    Teverovsky, Alexander A.

    2014-01-01

    Polymer cathode tantalum capacitors have lower ESR (equivalent series resistance) compared to other types of tantalum capacitors and for this reason have gained popularity in the electronics design community. Their use allows improved performance of power supply systems along with substantial reduction of size and weight of the components used. However, these parts have poor thermal stability and can degrade in humid environments. Polymer hermetically sealed (PHS) capacitors avoid problems related to environmental degradation of molded case parts and can potentially replace current wet and solid hermetically sealed capacitors. In this work, PHS capacitors manufactured per DLA LAM DWG#13030 are evaluated for space applications. Several lots of capacitors manufactured over period from 2010 to 2014 were tested for the consistency of performance, electrical and thermal characteristics, highly accelerated life testing, and robustness under reverse bias and random vibration conditions. Special attention was given to analysis of leakage currents and the effect of long-term high temperature storage on capacitors in as is condition and after hermeticity loss. The results show that PHS capacitors might be especially effective for low-temperature applications or for system requiring a cold start-up. Additional screening and qualification testing have been recommended to assure the necessary quality of capacitors for space projects.

  2. Alkaline Electrochemical Capacitor and Electrode Fabrication

    National Research Council Canada - National Science Library

    Finello, D

    1999-01-01

    .... The subject low cost alkaline electrochemical capacitor designs are based upon titanium nitride electrodes which exhibit 125 mF/sq cm surface capacitance density and remarkable electrochemical...

  3. New Temperature-Insensitive Electronically-Tunable Grounded Capacitor Simulator

    OpenAIRE

    Muhammad Taher Abuelma'atti; Muhammad Haroon Khan

    1996-01-01

    A new circuit for simulating a grounded capacitor is presented. The circuit uses one operationalamplifier (OA), three operational-transconductance amplifiers (OTAs), and one capacitor. The realized capacitor is temperature-insensitive and electronically tunable. Experimental results are included.

  4. Capacitor ageing in electronic devices

    Directory of Open Access Journals (Sweden)

    Richard B. N. Vital

    2015-10-01

    Full Text Available The moment when an electronic component doesn’t work like requirements, previously established is a task that need to be considered since began of a system design. However, the use of different technologies, operating under several environmental conditions, makes a component choice a complex step in system design. This paper analyzes the effects that ageing phenomenon of capacitors may introduce in electronic devices operation. For this reason, reliability concepts, processes and mechanism of degradation are presented. Additionally, some mathematical models are presented to assist maintenance activities or component replacement. The presented approach compares the operability of intact and aged components.

  5. Nanoporous carbon for electrochemical capacitors.

    Energy Technology Data Exchange (ETDEWEB)

    Siegal, Michael P.; Bunker, Bruce Conrad; Limmer, Steven J.; Yelton, William Graham

    2010-05-01

    Nanoporous carbon (NPC) is a purely graphitic material with highly controlled densities ranging from less than 0.1 to 2.0 g/cm3, grown via pulsed-laser deposition. Decreasing the density of NPC increases the interplanar spacing between graphene-sheet fragments. This ability to tune the interplanar spacing makes NPC an ideal model system to study the behavior of carbon electrodes in electrochemical capacitors and batteries. We examine the capacitance of NPC films in alkaline and acidic electrolytes, and measure specific capacitances as high as 242 F/g.

  6. Nanoporous carbon for electrochemical capacitors.

    Energy Technology Data Exchange (ETDEWEB)

    Overmyer, Donald L.; Siegal, Michael P.; Bunker, Bruce Conrad; Limmer, Steven J.; Yelton, William Graham

    2010-04-01

    Nanoporous carbon (NPC) is a purely graphitic material with highly controlled densities ranging from less than 0.1 to 2.0 g/cm3, grown via pulsed-laser deposition. Decreasing the density of NPC increases the interplanar spacing between graphene-sheet fragments. This ability to tune the interplanar spacing makes NPC an ideal model system to study the behavior of carbon electrodes in electrochemical capacitors and batteries. We examine the capacitance of NPC films in alkaline and acidic electrolytes, and measure specific capacitances as high as 242 F/g.

  7. Capacitor storage voltage stabilization device

    International Nuclear Information System (INIS)

    Logvin, V.V.; Gusev, E.V.

    1987-01-01

    An electric circuit of a device designed for charging and stabilizing a capacitor storage is described. A phase-pulse method for thyristor control in the power transformer first circuit is used. In the process of storage charging the triggering angle of thyristors linearly grows, that excludes the necessity of application of current-limiting elements in the charging circuit. The averaged charging voltage of the storage linearly dependce on charging time. Charging is realized by a series of short-time current pulses. Output voltage is controlled within 10...95% limits of the rated value. Voltage instability is ≤0.5% at power supply voltage variation of ±10%

  8. Inhibition of cholesterol recycling impairs cellular PrPSc propagation

    OpenAIRE

    Gilch, Sabine; Bach, Christian; Lutzny, Gloria; Vorberg, Ina; Sch?tzl, Hermann M.

    2009-01-01

    The infectious agent in prion diseases consists of an aberrantly folded isoform of the cellular prion protein (PrPc), termed PrPSc, which accumulates in brains of affected individuals. Studies on prion-infected cultured cells indicate that cellular cholesterol homeostasis influences PrPSc propagation. Here, we demonstrate that the cellular PrPSc content decreases upon accumulation of cholesterol in late endosomes, as induced by NPC-1 knock-down or treatment with U18666A. PrPc trafficking, lip...

  9. Cryogenic Capacitors for Low-Temperature Power Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TRS Technologies proposes to develop low-temperature multilayer ceramic capacitors (MLCCs) capable of operating at cyrogenic temperatures (<77K). These capacitors...

  10. Infectivity-associated PrPSc and disease duration-associated PrPSc of mouse BSE prions

    Science.gov (United States)

    Miyazawa, Kohtaro; Okada, Hiroyuki; Masujin, Kentaro; Iwamaru, Yoshifumi; Yokoyama, Takashi

    2015-01-01

    ABSTRACT Disease-related prion protein (PrPSc), which is a structural isoform of the host-encoded cellular prion protein, is thought to be a causative agent of transmissible spongiform encephalopathies. However, the specific role of PrPSc in prion pathogenesis and its relationship to infectivity remain controversial. A time-course study of prion-affected mice was conducted, which showed that the prion infectivity was not simply proportional to the amount of PrPSc in the brain. Centrifugation (20,000 ×g) of the brain homogenate showed that most of the PrPSc was precipitated into the pellet, and the supernatant contained only a slight amount of PrPSc. Interestingly, mice inoculated with the obtained supernatant showed incubation periods that were approximately 15 d longer than those of mice inoculated with the crude homogenate even though both inocula contained almost the same infectivity. Our results suggest that a small population of fine PrPSc may be responsible for prion infectivity and that large, aggregated PrPSc may contribute to determining prion disease duration. PMID:26555211

  11. Microprocessor Controlled Capacitor Bank Switching System for ...

    African Journals Online (AJOL)

    In this work, analysis and development of a microprocessor controlled capacitor bank switching system for deployment in a smart distribution network was carried out. This system was implemented by the use of discreet components such as resistors, capacitors, transistor, diode, automatic voltage regulator, with the ...

  12. Simple Ways to Make Real Capacitors

    Science.gov (United States)

    Herman, Rhett

    2014-01-01

    Many of us have grabbed two pieces of aluminum foil and a paper towel, quickly sandwiched them together, and exclaimed in lecture, "Look! It's easy to make a capacitor!" Then we move on from there, calculating things such as capacitances with various dielectrics or plate sizes, the capacitance of capacitor networks, RC circuits,…

  13. High frequency, high power capacitor development

    Science.gov (United States)

    White, C. W.; Hoffman, P. S.

    1983-01-01

    A program to develop a special high energy density, high power transfer capacitor to operate at frequency of 40 kHz, 600 V rms at 125 A rms plus 600 V dc bias for space operation. The program included material evaluation and selection, a capacitor design was prepared, a thermal analysis performed on the design. Fifty capacitors were manufactured for testing at 10 kHz and 40 kHz for 50 hours at Industrial Electric Heating Co. of Columbus, Ohio. The vacuum endurance test used on environmental chamber and temperature plate furnished by Maxwell. The capacitors were energized with a special power conditioning apparatus developed by Industrial Electric Heating Co. Temperature conditions of the capacitors were monitored by IEHCo test equipment. Successful completion of the vacuum endurance test series confirmed achievement of the main goal of producing a capacitor or reliable operation at high frequency in an environment normally not hospitable to electrical and electronic components. The capacitor developed compared to a typical commercial capacitor at the 40 kHz level represents a decrease in size and weight by a factor of seven.

  14. Are the Textbook Writers Wrong about Capacitors?

    Science.gov (United States)

    French, A. P.

    1993-01-01

    Refutes a recent article which stated that the standard textbook treatment of two capacitors in series is wrong. States that the calculated capacitance is correct if measured immediately after a dc voltage is applied and that perhaps the effect is due to the choice of materials making up the capacitor. (MVL)

  15. Hydrogel membrane electrolyte for electrochemical capacitors

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 121; Issue 5. Hydrogel membrane electrolyte for electrochemical capacitors ... In the present study, the preparation and characterization of poly(vinyl alcohol)-based hydrogel membranes (PHMEs) as electrolytes for electrochemical capacitors have been reported.

  16. Nanostructured Electrode Materials for Electrochemical Capacitor Applications

    Directory of Open Access Journals (Sweden)

    Hojin Choi

    2015-06-01

    Full Text Available The advent of novel organic and inorganic nanomaterials in recent years, particularly nanostructured carbons, conducting polymers, and metal oxides, has enabled the fabrication of various energy devices with enhanced performance. In this paper, we review in detail different nanomaterials used in the fabrication of electrochemical capacitor electrodes and also give a brief overview of electric double-layer capacitors, pseudocapacitors, and hybrid capacitors. From a materials point of view, the latest trends in electrochemical capacitor research are also discussed through extensive analysis of the literature and by highlighting notable research examples (published mostly since 2013. Finally, a perspective on next-generation capacitor technology is also given, including the challenges that lie ahead.

  17. Switched-capacitor isolated LED driver

    Science.gov (United States)

    Sanders, Seth R.; Kline, Mitchell

    2016-03-22

    A switched-capacitor voltage converter which is particularly well-suited for receiving a line voltage from which to drive current through a series of light emitting diodes (LEDs). Input voltage is rectified in a multi-level rectifier network having switched capacitors in an ascending-bank configuration for passing voltages in uniform steps between zero volts up to full received voltage V.sub.DC. A regulator section, operating on V.sub.DC, comprises switched-capacitor stages of H-bridge switching and flying capacitors. A current controlled oscillator drives the states of the switched-capacitor stages and changes its frequency to maintain a constant current to the load. Embodiments are described for isolating the load from the mains, utilizing an LC tank circuit or a multi-primary-winding transformer.

  18. Bulk Modulus Capacitor Load Cells

    International Nuclear Information System (INIS)

    Dickey, C.E.

    1990-04-01

    Measurement of forces present at various locations within the SSC Model Dipole collared coil assembly is of great practical interest to development engineers. Of particular interest are the forces between coils at the parting plane and forces that exist between coils and pole pieces. It is also desired to observe these forces under the various conditions that a magnet will experience such as: during the collaring process, post-collaring, under the influence of cryogens, and during field excitation. A twenty eight thousandths of an inch thick capacitor load cell which utilizes the hydrostatic condition of a stressed plastic dielectric has been designed. These cells are currently being installed on SSC Model Dipoles. The theory, development, and application of these cells will be discussed

  19. Bulk modulus capacitor load cells

    International Nuclear Information System (INIS)

    Dickey, C.E.

    1990-01-01

    Measurement of forces present at various locations within the SSC Model Dipole collared coil assembly is of great practical interest to development engineers. Of particular interest are the forces between coils at the parting plane and forces that exist between coils and pole pieces. It is also desired to observe these forces under the various conditions that a magnet will experience such as: during the collaring process, post-collaring, under the influence of cryogens, and during field excitation. A twenty eight thousandths of an inch thick capacitor load cell which utilizes the hydrostatic condition of a stressed plastic dielectric has been designed. These cells are currently being installed on SSC Model Dipoles. The theory, development, and application of these cells will be discussed. 1 fig

  20. Nonaqueous Electrolyte Development for Electrochemical Capacitors

    Energy Technology Data Exchange (ETDEWEB)

    K. Xu; S. P. Ding; T. R. Jow

    1999-09-01

    The objectives of this project were to demonstrate and develop new nonaqueous electrolytes that enable the development of high power (in excess of 2 kW/kg) and high energy (in excess of 8 Wh/kg) capacitors. Electrochemical capacitors are attractive to use because of their long cycle life and inherent high-power (or fast charge/discharge) capabilities. To realize the inherent high-power nature of the capacitor, the resistance of the capacitor needs to be low. The main focus of this project is on the ionic part of capacitor resistance, which is largely determined by the electrolyte, especially the electrolyte's conductivity. To achieve the objectives of this project, two approaches were used. The first was to search for the proper solvent mixtures within the commercially available quaternary ammonium salts such as tetraethyl ammonium tetrafluoroborate (Et4NBF4) or tetraethyl ammonium hexafluorophosphate (Et4NPF6). The second approach was to use the commonly available solvent system s but develop new salts. Substantial advances were made in quaternary ammonium salts and solvent systems were identified that can withstand high voltage operations. However, improvement in the salt alone is not sufficient. Improvements in the low-temperature stability of a capacitor rely not only on the salts but also on the solvents. Likewise, the high-temperature stability of the capacitor will depend not only on the salts but also on the solvents and carbon electrode materials.

  1. Recombinant PrPSc shares structural features with brain-derived PrPSc suggesting that they have a similar architecture: Insights from limited proteolysis

    Science.gov (United States)

    An extensive body of experimental and spectroscopic evidence supports the hypothesis that PrPSc is a multimer of 4-rung ß-solenoids, and that individual PrPSc solenoids stack to form amyloid fibers. We recently used limited proteolysis to map the ß-strands and connecting loops that make up the PrPSc...

  2. Coded Splitting Tree Protocols

    DEFF Research Database (Denmark)

    Sørensen, Jesper Hemming; Stefanovic, Cedomir; Popovski, Petar

    2013-01-01

    This paper presents a novel approach to multiple access control called coded splitting tree protocol. The approach builds on the known tree splitting protocols, code structure and successive interference cancellation (SIC). Several instances of the tree splitting protocol are initiated, each...... instance is terminated prematurely and subsequently iterated. The combined set of leaves from all the tree instances can then be viewed as a graph code, which is decodable using belief propagation. The main design problem is determining the order of splitting, which enables successful decoding as early...... as possible. Evaluations show that the proposed protocol provides considerable gains over the standard tree splitting protocol applying SIC. The improvement comes at the expense of an increased feedback and receiver complexity....

  3. Split Cord Malformations

    Directory of Open Access Journals (Sweden)

    Yurdal Gezercan

    2015-06-01

    Full Text Available Split cord malformations are rare form of occult spinal dysraphism in children. Split cord malformations are characterized by septum that cleaves the spinal canal in sagittal plane within the single or duplicated thecal sac. Although their precise incidence is unknown, split cord malformations are exceedingly rare and represent %3.8-5 of all congenital spinal anomalies. Characteristic neurological, urological, orthopedic clinical manifestations are variable and asymptomatic course is possible. Earlier diagnosis and surgical intervention for split cord malformations is associated with better long-term fuctional outcome. For this reason, diagnostic imaging is indicated for children with associated cutaneous and orthopedic signs. Additional congenital anomalies usually to accompany the split cord malformations. Earlier diagnosis, meticuolus surgical therapy and interdisciplinary careful evaluation and follow-up should be made for good prognosis. [Cukurova Med J 2015; 40(2.000: 199-207

  4. 2014 NEPP Tasks Update for Ceramic and Tantalum Capacitors

    Science.gov (United States)

    Teverovsky, Alexander A.

    2014-01-01

    Presentation describes recent development in research on MnO2, wet, and polymer tantalum capacitors. Low-voltage failures in multilayer ceramic capacitors and techniques to reveal precious metal electrode (PME) and base metal electrode (BME) capacitors with cracks are discussed. A voltage breakdown technique is suggested to select high quality low-voltage BME ceramic capacitors.

  5. Some remarks on the charging capacitor problem

    Science.gov (United States)

    Papachristou, C. J.

    2018-03-01

    The charging capacitor is used as a standard paradigm for illustrating the concept of the so-called Maxwell displacement current. A certain aspect of the problem, however, is often overlooked. It concerns the conditions for satisfaction of the Faraday-Henry law both in the interior and the exterior of the capacitor. In this article the situation is analyzed and a mathematical process is desribed for obtaining expressions for the electromagnetic field that satisfy the full set of Maxwell's equations both inside and outside the capacitor.

  6. Initial capacitor charging in grid-connected flying capacitor multilevel converters

    OpenAIRE

    Ghias, Amer M.Y.M.; Pou Félix, Josep; Agelidis, Vassilios; Ciobotaru, Mihai

    2014-01-01

    This letter reports a method for the initial charging of capacitors in grid-connected flying capacitor (FC) multilevel converters. A resistor is inserted between each phase of the FC converter and the grid. A voltage balancing algorithm is activated from the beginning of the process and the FC converter generates proper output voltages to achieve balanced charging of both the dc-bus capacitor and the FCs. The proposed initial charging method achieves low voltage and current stress on the powe...

  7. Capacitor Voltages Measurement and Balancing in Flying Capacitor Multilevel Converters Utilizing a Single Voltage Sensor

    DEFF Research Database (Denmark)

    Farivar, Glen; Ghias, Amer M. Y. M.; Hredzak, Branislav

    2017-01-01

    This paper proposes a new method for measuring capacitor voltages in multilevel flying capacitor (FC) converters that requires only one voltage sensor per phase leg. Multiple dc voltage sensors traditionally used to measure the capacitor voltages are replaced with a single voltage sensor at the ac...... side of the phase leg. The proposed method is subsequently used to balance the capacitor voltages using only the measured ac voltage. The operation of the proposed measurement and balancing method is independent of the number of the converter levels. Experimental results presented for a five-level FC...

  8. Physical and Electrical Characterization of Polymer Aluminum Capacitors

    Science.gov (United States)

    Liu, David; Sampson, Michael J.

    2010-01-01

    Polymer aluminum capacitors from several manufacturers with various combinations of capacitance, rated voltage, and ESR values were physically examined and electrically characterized. The physical construction analysis of the capacitors revealed three different capacitor structures, i.e., traditional wound, stacked, and laminated. Electrical characterization results of polymer aluminum capacitors are reported for frequency-domain dielectric response at various temperatures, surge breakdown voltage, and other dielectric properties. The structure-property relations in polymer aluminum capacitors are discussed.

  9. Physical and Electrical Characterization of Aluminum Polymer Capacitors

    Science.gov (United States)

    Liu, David; Sampson, Michael J.

    2010-01-01

    Polymer aluminum capacitors from several manufacturers with various combinations of capacitance, rated voltage, and ESR values were physically examined and electrically characterized. The physical construction analysis of the capacitors revealed three different capacitor structures, i.e., traditional wound, stacked, and laminated. Electrical characterization results of polymer aluminum capacitors are reported for frequency-domain dielectric response at various temperatures, surge breakdown voltage, and other dielectric properties. The structure-property relations in polymer aluminum capacitors are discussed.

  10. Pseudo-capacitor device for aqueous electrolytes

    Science.gov (United States)

    Prakash, J.; Thackeray, M.M.; Dees, D.W.; Vissers, D.R.; Myles, K.M.

    1998-11-24

    A pseudo-capacitor having a high energy storage capacity develops a double layer capacitance as well as a Faradaic or battery-like redox reaction, also referred to as pseudo-capacitance. The Faradaic reaction gives rise to a capacitance much greater than that of the typical ruthenate oxide ultracapacitor which develops only charge separation-based double layer capacitance. The capacitor employs a lead and/or bismuth/ruthenate and/or iridium system having the formula A{sub 2}[B{sub 2{minus}x}Pb{sub x}]O{sub 7{minus}y}, where A=Pb, Bi, and B=Ru, Ir, and Opower density in the pseudo-capacitor. The amount of expensive ruthenate and iridium can be substantially reduced in the pseudo-capacitor by increasing the lead content while improving energy storage capacity. 8 figs.

  11. Relaxors Terpolymers for Energy Storage Capacitors

    National Research Council Canada - National Science Library

    Zhang, Qiming

    2005-01-01

    In this program, Penn State, TRS Technologies, and Electronic Concepts, Inc. (ECI) worked together to perform a preliminary investigation of various issues related to the ferroelectric relaxor terpolymer for energy storage capacitors...

  12. High Energy Density Polymer Film Capacitors

    National Research Council Canada - National Science Library

    Boufelfel, Ali

    2006-01-01

    High-energy-density capacitors that are compact and light-weight are extremely valuable in a number of critical DoD systems that include portable field equipment, pulsed lasers, detection equipment...

  13. Alkaline Electrochemical Capacitor and Electrode Fabrication

    National Research Council Canada - National Science Library

    Finello, D

    1999-01-01

    .... With energy density in excess of 300 mJ/cc and the potential to exceed a power density of 100 W/cc, the alkaline electrochemical capacitor represents a significant advancement in technology for high power energy storage.

  14. High Energy Density Capacitors, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Capacitor size and reliability are often limiting factors in pulse power, high speed switching, and power management and distribution (PMAD) systems. T/J...

  15. Anisotropic magnetocapacitance in ferromagnetic-plate capacitors

    Science.gov (United States)

    Haigh, J. A.; Ciccarelli, C.; Betz, A. C.; Irvine, A.; Novák, V.; Jungwirth, T.; Wunderlich, J.

    2015-04-01

    The capacitance of a parallel-plate capacitor can depend on the applied magnetic field. Previous studies have identified capacitance changes induced via classical Lorentz force or spin-dependent Zeeman effects. Here we measure a magnetization direction-dependent capacitance in parallel-plate capacitors where one plate is a ferromagnetic semiconductor, gallium manganese arsenide. This anisotropic magnetocapacitance is due to the anisotropy in the density of states dependent on the magnetization through the strong spin-orbit interaction.

  16. Transmission Line Resonator Segmented with Series Capacitors

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Boer, Vincent; Petersen, Esben Thade

    2016-01-01

    Transmission line resonators are often used as coils in high field MRI. Due to distributed nature of such resonators, coils based on them produce inhomogeneous field. This work investigates application of series capacitors to improve field homogeneity along the resonator. The equations for optimal...... values of evenly distributed capacitors are presented. The performances of the segmented resonator and a regular transmission line resonator are compared....

  17. Commercially Available Capacitors at Cryogenic Temperatures

    OpenAIRE

    Teyssandier, F.; Prêle, D.

    2010-01-01

    Commercially available capacitors are not specified for operation at 77 K or 4 K, and some devices showed a dramatic decrease of capacitance at cryogenic temperature. Furthermore, for voltage biasing of cryogenic low impedance sensors it is very important to know parasitic resistance. In this case, the parasitic Equivalent Series Resistance (ESR) of the capacitor used for the AC-biasing is a bottleneck of the voltage biasing. Involved in TES development and SQUID multiplexing, we have charact...

  18. High-performance planar nanoscale dielectric capacitors

    OpenAIRE

    Ciraci, S.; Özçelik, V. Ongun

    2016-01-01

    We propose a model for planar nanoscale dielectric capacitor consisting of a single layer, insulating hexagonal boron nitride (BN) stripe placed between two metallic graphene stripes, all forming commensurately a single atomic plane. First-principles density functional calculations on these nanoscale capacitors for different levels of charging and different widths of graphene - BN stripes mark high gravimetric capacitance values, which are comparable to those of supercapacitors made from othe...

  19. Monolithic ceramic capacitors for high reliability applications

    Science.gov (United States)

    Thornley, E. B.

    1981-01-01

    Monolithic multi-layer ceramic dielectric capacitors are widely used in high reliability applications in spacecraft, launch vehicles, and military equipment. Their relatively low cost, wide range of values, and package styles are attractive features that result in high usage in electronic circuitry in these applications. Design and construction of monolithic ceramic dielectric capacitors, defects that can lead to failure, and methods for defect detection that are being incorporated in military specifications are discussed.

  20. Some remarks on the charging capacitor problem

    OpenAIRE

    Papachristou, C. J.

    2017-01-01

    The charging capacitor is used as a standard paradigm for illustrating the concept of the so-called Maxwell displacement current. A certain aspect of the problem, however, is often overlooked. It concerns the conditions for satisfaction of the Faraday-Henry law both in the interior and the exterior of the capacitor. In this article the situation is analyzed and a mathematical process is desribed for obtaining expressions for the electromagnetic field that satisfy the full set of Maxwell's equ...

  1. Heterogeneity of the Abnormal Prion Protein (PrPSc) of the Chandler Scrapie Strain.

    Science.gov (United States)

    Kasai, Kazuo; Iwamaru, Yoshifumi; Masujin, Kentaro; Imamura, Morikazu; Mohri, Shirou; Yokoyama, Takashi

    2013-02-18

    The pathological prion protein, PrPSc, displays various sizes of aggregates. In this study, we investigated the conformation, aggregation stability and proteinase K (PK)-sensitivity of small and large PrPSc aggregates of mouse-adapted prion strains. We showed that small PrPSc aggregates, previously thought to be PK-sensitive, are resistant to PK digestion. Furthermore, we showed that small PrPSc aggregates of the Chandler scrapie strain have greater resistance to PK digestion and aggregation-denaturation than large PrPSc aggregates of this strain. We conclude that this strain consists of heterogeneous PrPSc.

  2. Capacitor blocks for linear transformer driver stages.

    Science.gov (United States)

    Kovalchuk, B M; Kharlov, A V; Kumpyak, E V; Smorudov, G V; Zherlitsyn, A A

    2014-01-01

    In the Linear Transformer Driver (LTD) technology, the low inductance energy storage components and switches are directly incorporated into the individual cavities (named stages) to generate a fast output voltage pulse, which is added along a vacuum coaxial line like in an inductive voltage adder. LTD stages with air insulation were recently developed, where air is used both as insulation in a primary side of the stages and as working gas in the LTD spark gap switches. A custom designed unit, referred to as a capacitor block, was developed for use as a main structural element of the transformer stages. The capacitor block incorporates two capacitors GA 35426 (40 nF, 100 kV) and multichannel multigap gas switch. Several modifications of the capacitor blocks were developed and tested on the life time and self breakdown probability. Blocks were tested both as separate units and in an assembly of capacitive module, consisting of five capacitor blocks. This paper presents detailed design of capacitor blocks, description of operation regimes, numerical simulation of electric field in the switches, and test results.

  3. The N-terminal cleavage site of PrPSc from BSE differs from that of PrPSc from scrapie.

    Science.gov (United States)

    Hayashi, Hiroko K; Yokoyama, Takashi; Takata, Masuhiro; Iwamaru, Yoshifumi; Imamura, Morikazu; Ushiki, Yuko K; Shinagawa, Morikazu

    2005-03-25

    Heterogeneity in transmissible spongiform encephalopathy is thought to have derived from conformational variation in an abnormal isoform of the prion protein (PrPSc). To characterize PrPSc in bovine spongiform encephalopathy (BSE) and scrapie, we analyzed the newly generated N-terminus of PrPSc isoforms by digestion with proteinase K (PK). With a lower concentration of PK, the terminal amino acid of BSE PrPSc converged at N96. Under the same conditions, however, the terminal amino acid of scrapie PrPSc was G81 or G85. Furthermore, with an increase of PK concentration, the N-terminal amino acid was shifted and converged at G89. The results suggest that the PK cleavage site of BSE PrPSc is uniform and is different from the cleavage site of scrapie PrPSc.

  4. Human induced pluripotent stem cell (hiPSC)-derived neurons respond to convulsant drugs when co-cultured with hiPSC-derived astrocytes.

    Science.gov (United States)

    Ishii, Misawa Niki; Yamamoto, Koji; Shoji, Masanobu; Asami, Asano; Kawamata, Yuji

    2017-08-15

    Accurate risk assessment for drug-induced seizure is expected to be performed before entering clinical studies because of its severity and fatal damage to drug development. Induced pluripotent stem cell (iPSC) technology has allowed the use of human neurons and glial cells in toxicology studies. Recently, several studies showed the advantage of co-culture system of human iPSC (hiPSC)-derived neurons with rodent/human primary astrocytes regarding neuronal functions. However, the application of hiPSC-derived neurons for seizure risk assessment has not yet been fully addressed, and not at all when co-cultured with hiPSC-derived astrocytes. Here, we characterized hiPSC-derived neurons co-cultured with hiPSC-derived astrocytes to discuss how hiPSC-derived neurons are useful to assess seizure risk of drugs. First, we detected the frequency of spikes and synchronized bursts hiPSC-derived neurons when co-cultured with hiPSC-derived astrocytes for 8 weeks. This synchronized burst was suppressed by the treatment with 6-cyano-7-nitroquinoxaline-2,3-dione, α-amino-3-hydroxy-5-methylisoxazole-4-propionic acid (AMPA) receptor antagonist, and D-(-)-2-amino-5-phosphonopentanoic acid, an N-Methyl-d-aspartate (NMDA) receptor antagonist. These data suggested that co-cultured hiPSC-derived neurons formed synaptic connections mediated by AMPA and NMDA receptors. We also demonstrated that co-cultured hiPSC-derived neurons showed epileptiform activity upon treatment with gabazine or kaliotoxin. Finally, we performed single-cell transcriptome analysis in hiPSC-derived neurons and found that hiPSC-derived astrocytes activated the pathways involved in the activities of AMPA and NMDA receptor functions, neuronal polarity, and axon guidance in hiPSC-derived neurons. These data suggested that hiPSC-derived astrocytes promoted the development of action potential, synaptic functions, and neuronal networks in hiPSC-derived neurons, and then these functional alterations result in the epileptiform

  5. Split Malcev algebras

    Indian Academy of Sciences (India)

    project of the Spanish Ministerio de Educación y Ciencia MTM2007-60333. References. [1] Calderón A J, On split Lie algebras with symmetric root systems, Proc. Indian. Acad. Sci (Math. Sci.) 118(2008) 351–356. [2] Calderón A J, On split Lie triple systems, Proc. Indian. Acad. Sci (Math. Sci.) 119(2009). 165–177.

  6. Physical and Electrical Characterization of Aluminum Polymer Capacitors

    Science.gov (United States)

    Liu, David (Donghang)

    2010-01-01

    Conductive polymer aluminum capacitor (PA capacitor) is an evolution of traditional wet electrolyte aluminum capacitors by replacing liquid electrolyte with a solid, highly conductive polymer. On the other hand, the cathode construction in polymer aluminum capacitors with coating of carbon and silver epoxy for terminal connection is more like a combination of the technique that solid tantalum capacitor utilizes. This evolution and combination result in the development of several competing capacitor construction technologies in manufacturing polymer aluminum capacitors. The driving force of this research on characterization of polymer aluminum capacitors is the rapid progress in IC technology. With the microprocessor speeds exceeding a gigahertz and CPU current demands of 80 amps and more, the demand for capacitors with higher peak current and faster repetition rates bring conducting polymer capacitors to the center o( focus. This is because this type of capacitors has been known for its ultra-low ESR and high capacitance. Polymer aluminum capacitors from several manufacturers with various combinations of capacitance, rated voltage, and ESR values were obtained and tested. The construction analysis of the capacitors revealed three different constructions: conventional rolled foil, the multilayer stacking V-shape, and a dual-layer sandwich structure. The capacitor structure and its impact on the electrical characteristics has been revealed and evaluated. A destructive test with massive current over stress to fail the polymer aluminum capacitors reveals that all polymer aluminum capacitors failed in a benign mode without ignition, combustion, or any other catastrophic failures. The extraordinary low ESR (as low as 3 mOMEGA), superior frequency independence reported for polymer aluminum capacitors have been confirmed. For the applications of polymer aluminum capacitors in space programs, a thermal vacuum cycle test was performed. The results, as expected, show no

  7. Small molecules facilitate rapid and synchronous iPSC generation

    OpenAIRE

    Bar-Nur, Ori; Brumbaugh, Justin; Verheul, Cassandra; Apostolou, Effie; Pruteanu-Malinici, Iulian; Walsh, Ryan M.; Ramaswamy, Sridhar; Hochedlinger, Konrad

    2014-01-01

    The reprogramming of somatic cells into induced pluripotent stem cells (iPSCs) upon overexpression of OCT4, KLF4, SOX2, and c-MYC (OKSM) provides a powerful system to interrogate basic mechanisms of cell fate change. However, iPSC formation with standard methods is protracted and inefficient, resulting in heterogeneous cell populations. Here we show that exposure of OKSM-expressing cells to both ascorbic acid and a GSK3-beta inhibitor (termed ?AGi?) facilitates more synchronous and rapid iPSC...

  8. A Performance of the Soft-Charging Operation in Series of Step-Up Power Switched-Capacitor Converters

    OpenAIRE

    Ayoob Alateeq; Yasser Almalaq; Mohammad Matin

    2018-01-01

    Due to their high power density and appropriateness for small circuits integration, switched-capacitor (SC) converters have gotten more interests. Applying the soft-charging technique effectively eliminates the current transient that results in a higher power density and a higher fundamental efficiency. Achieving the complete soft-charging operation is impossible by using the conventional control diagram for any SC converter topology. In this paper, we proposed a split-phase control to achiev...

  9. Fast risetime one megajoule capacitor bank

    International Nuclear Information System (INIS)

    Markins, D.; Baker, W.L.; Reinovsky, R.E.; Clark, J.G.

    1976-01-01

    A 100 kV, 1.1 MJ capacitor bank for plasma research experiments has been constructed for the Air Force Weapons Laboratory. The system consists of twenty, individual, low inductance capacitor modules, each utilizing a four element switch package approximately 2 meters wide. Each module contains twenty-four ''scyllac'' type 1.85 μF capacitors. A 100 kV output pulse is obtained by charging the top half of each module to +50 kV and the bottom half to -50 kV. A pressurized, low inductance multichannel switch package incorporating four separately triggered elements is designed to fit into the parallel plate transmission line system of the capacitor module. The bank is configured in a cross shape with twenty modules spaced uniformly around the perimeter of a parallel plate transmission line. The transmission line is constructed with 32 mil aluminum and insulated with 60 mils of mylar. The bank is designed to feed an easily replaceable central coaxial load. The entire system has been repeatedly fired at 100 kV with a dummy resistive load and has delivered 2.2 x 10 7 amperes of current with a risetime of 1.1 μsec. The total measured system inductance is 2.2 nH. This system represents a significant advance in the development of reliable, fast, high current capacitor banks

  10. BioCapacitor--a novel category of biosensor.

    Science.gov (United States)

    Hanashi, Takuya; Yamazaki, Tomohiko; Tsugawa, Wakako; Ferri, Stefano; Nakayama, Daisuke; Tomiyama, Masamitsu; Ikebukuro, Kazunori; Sode, Koji

    2009-03-15

    This research reports on the development of an innovative biosensor, known as BioCapacitor, in which biological recognition elements are combined with a capacitor functioning as the transducer. The analytical procedure of the BioCapacitor is based on the following principle: a biocatalyst, acting as a biological recognition element, oxidizes or reduces the analyte to generate electric power, which is then charged into a capacitor via a charge pump circuit (switched capacitor regulator) until the capacitors attains full capacity. Since the charging rate of the capacitor depends on the biocatalytic reaction of the analyte, the analyte concentration can be determined by monitoring the time/frequency required for the charge/discharge cycle of the BioCapacitor via a charge pump circuit. As a representative model, we constructed a BioCapacitor composed of FAD-dependent glucose dehydrogenase (FADGDH) as the anodic catalyst, and attempted a glucose measurement. Charge/discharge frequency of the BioCapacitor increased with the increasing glucose concentration, exhibiting good correlation with glucose concentration. We have also constructed a wireless sensing system using the BioCapacitor combined with an infrared light emitting diode (IRLED), an IR phototransistor system. In the presence of glucose, the IRLED signal was observed due to the discharge of the BioCapacitor and detected by an IR phototransistor in a wireless receiver. Therefore, a BioCapacitor employing FADGDH as its anodic catalyst can be operated as a self-powered enzyme sensor.

  11. Aspects of Split Supersymmetry

    CERN Document Server

    Arkani-Hamed, N; Giudice, Gian Francesco; Romanino, A

    2005-01-01

    We explore some fundamental differences in the phenomenology, cosmology and model building of Split Supersymmetry compared with traditional low-scale supersymmetry. We show how the mass spectrum of Split Supersymmetry naturally emerges from theories where the dominant source of supersymmetry breaking preserves an $R$ symmetry, characterize the class of theories where the unavoidable $R$-breaking by gravity can be neglected, and point out a new possibility, where supersymmetry breaking is directly communicated at tree level to the visible sector via renormalizable interactions. Next, we discuss possible low-energy signals for Split Supersymmetry. The absence of new light scalars removes all the phenomenological difficulties of low-energy supersymmetry, associated with one-loop flavor and CP violating effects. However, the electric dipole moments of leptons and quarks do arise at two loops, and are automatically at the level of present limits with no need for small phases, making them accessible to several ongo...

  12. Comparative effects of Potash Sodium Chloride (PSC) mixture and ...

    African Journals Online (AJOL)

    Honey (Mellifica sp) is produced by Apis mellifera africana, widely consumed without prescription or restriction, and has been shown to possess wound healing and antitusive properties. Comparative study of the effects of honey paste and Potash Sodium Chloride (PSC) mixture on the healing of incisional wound on albino ...

  13. Negative capacitance in a ferroelectric capacitor.

    Science.gov (United States)

    Khan, Asif Islam; Chatterjee, Korok; Wang, Brian; Drapcho, Steven; You, Long; Serrao, Claudy; Bakaul, Saidur Rahman; Ramesh, Ramamoorthy; Salahuddin, Sayeef

    2015-02-01

    The Boltzmann distribution of electrons poses a fundamental barrier to lowering energy dissipation in conventional electronics, often termed as Boltzmann Tyranny. Negative capacitance in ferroelectric materials, which stems from the stored energy of a phase transition, could provide a solution, but a direct measurement of negative capacitance has so far been elusive. Here, we report the observation of negative capacitance in a thin, epitaxial ferroelectric film. When a voltage pulse is applied, the voltage across the ferroelectric capacitor is found to be decreasing with time--in exactly the opposite direction to which voltage for a regular capacitor should change. Analysis of this 'inductance'-like behaviour from a capacitor presents an unprecedented insight into the intrinsic energy profile of the ferroelectric material and could pave the way for completely new applications.

  14. Pseudo-capacitor device for aqueous electrolytes

    Science.gov (United States)

    Prakash, Jai; Thackeray, Michael M.; Dees, Dennis W.; Vissers, Donald R.; Myles, Kevin M.

    1998-01-01

    A pseudo-capacitor having a high energy storage capacity develops a double layer capacitance as well as a Faradaic or battery-like redox reaction, also referred to as pseudo-capacitance. The Faradaic reaction gives rise to a capacitance much greater than that of the typical ruthenate oxide ultracapacitor which develops only charge separation-based double layer capacitance. The capacitor employs a lead and/or bismuth/ruthenate and/or iridium system having the formula A.sub.2 ›B.sub.2-x Pb.sub.x !O.sub.7-y, where A=Pb, Bi, and B=Ru, Ir, and Ocapacitor. The amount of expensive ruthenate and iridium can be substantially reduced in the pseudo-capacitor by increasing the lead content while improving energy storage capacity.

  15. Downhole transmission system comprising a coaxial capacitor

    Science.gov (United States)

    Hall, David R [Provo, UT; Pixton, David S [Lehi, UT; Johnson, Monte L [Orem, UT; Bartholomew, David B [Springville, UT; Hall, Jr., H. Tracy; Rawle, Michael [Springville, UT

    2011-05-24

    A transmission system in a downhole component comprises a plurality of data transmission elements. A coaxial cable having an inner conductor and an outer conductor is disposed within a passage in the downhole component such that at least one capacitor is disposed in the passage and having a first terminal coupled to the inner conductor and a second terminal coupled to the outer conductor. Preferably the transmission element comprises an electrically conducting coil. Preferably, within the passage a connector is adapted to electrically connect the inner conductor of the coaxial cable and the lead wire. The coaxial capacitor may be disposed between and in electrically communication with the connector and the passage. In another embodiment a connector is adapted to electrical connect a first and a second portion of the inner conductor of the coaxial cable and a coaxial capacitor is in electrical communication with the connector and the passage.

  16. A robust power spectrum split cancellation-based spectrum sensing method for cognitive radio systems

    International Nuclear Information System (INIS)

    Qi Pei-Han; Li Zan; Si Jiang-Bo; Gao Rui

    2014-01-01

    Spectrum sensing is an essential component to realize the cognitive radio, and the requirement for real-time spectrum sensing in the case of lacking prior information, fading channel, and noise uncertainty, indeed poses a major challenge to the classical spectrum sensing algorithms. Based on the stochastic properties of scalar transformation of power spectral density (PSD), a novel spectrum sensing algorithm, referred to as the power spectral density split cancellation method (PSC), is proposed in this paper. The PSC makes use of a scalar value as a test statistic, which is the ratio of each subband power to the full band power. Besides, by exploiting the asymptotic normality and independence of Fourier transform, the distribution of the ratio and the mathematical expressions for the probabilities of false alarm and detection in different channel models are derived. Further, the exact closed-form expression of decision threshold is calculated in accordance with Neyman—Pearson criterion. Analytical and simulation results show that the PSC is invulnerable to noise uncertainty, and can achive excellent detection performance without prior knowledge in additive white Gaussian noise and flat slow fading channels. In addition, the PSC benefits from a low computational cost, which can be completed in microseconds. (interdisciplinary physics and related areas of science and technology)

  17. Li-Ion, Ultra-capacitor Based Hybrid Energy Module

    National Research Council Canada - National Science Library

    Daboussi, Zaher; Paryani, Anil; Khalil, Gus; Catherino, Henry; Gargies, Sonya

    2007-01-01

    .... To determine the optimum utilization of ultra-capacitors in applications where high power density and high energy density are required, an optimized Li-Ion/Ultra-capacitor Hybrid Energy Module (HEM...

  18. Wide Temperature DC Link Capacitors for Aerospace Power Electronics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will develop advanced DC link capacitors using flexible ultrathin glass dielectric materials. The glass capacitor will be able to be operated in a broad...

  19. Low-Voltage Switched-Capacitor Circuits

    DEFF Research Database (Denmark)

    Bidari, E.; Keskin, M.; Maloberti, F.

    1999-01-01

    Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications.......Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications....

  20. Clocking Scheme for Switched-Capacitor Circuits

    DEFF Research Database (Denmark)

    Steensgaard-Madsen, Jesper

    1998-01-01

    A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed.......A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed....

  1. Electric field mapping inside metallized film capacitors

    DEFF Research Database (Denmark)

    Nielsen, Dennis Achton; Popok, Vladimir; Pedersen, Kjeld

    2015-01-01

    Failure mode and effect analysis (FMEA) is an important step in the reliability assessment process of electric components. It provides knowledge of the physics of failure of a component that has been subjected to a given stress profile. This knowledge enables improvement of the component robustness...... of the metallization stripes had lost contact to the end-spray. Thus, it is shown that the surface electric potential distributions on micro-sectioned film capacitors can be obtained through KPFM analysis. We have, from KPFM measurements, shown that the degraded capacitors under investigation had suffered from...

  2. Performance of ALVAND 1. capacitor bank

    International Nuclear Information System (INIS)

    Torabi-fard, A.; Farahani, M.; Ebrani, M.; Rostami, R.; Daghighian, F.

    1978-01-01

    This report describes the specifications of the capacitor bank for the ALVAND I, Linear theta pinch experiment and the results of some tests performed on it. A one-meter-wide module includes the basic components such as capacitors, Spark gaps, and crowbar triggers. Complementary parts such as ground system, pressurised dry air system and safety system were added. With a rise-time of about three micro-seconds and a total current of six million amperes it is possible to produce ion temperature in excess of one kev for a few microseconds. Different probes were used to measure the magnetic field and the total current

  3. Design and Characterization of Vertical Mesh Capacitors in Standard CMOS

    DEFF Research Database (Denmark)

    Christensen, Kåre Tais

    2001-01-01

    This paper shows how good RF capacitors can be made in a standard digital CMOS process. The capacitors which are also well suited for binary weighted switched capacitor banks show very good RF performance: Q-values of 57 at 4.0 GHz, a density of 0.27 fF/μ2, 2.2 μm wide shielded unit capacitors, 6...

  4. Split Malcev algebras

    Indian Academy of Sciences (India)

    We study the structure of split Malcev algebras of arbitrary dimension over an algebraically closed field of characteristic zero. We show that any such algebras is of the form M = U + ∑ j I j with U a subspace of the abelian Malcev subalgebra and any I j a well described ideal of satisfying [ I j , I k ] = 0 if ≠ .

  5. Splitting of Comets

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 7; Issue 1. Splitting of Comets. Utpal Mukhopadhyay. General Article Volume 7 Issue 1 January 2002 pp 11-22. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/007/01/0011-0022. Keywords. Cometary ...

  6. Iodine encapsulation in CNTs and its application for electrochemical capacitor

    Energy Technology Data Exchange (ETDEWEB)

    Taniguchi, Y.; Ishii, Y.; Al-zubaidi, A.; Kawasaki, S., E-mail: kawasaki.shinji@nitech.ac.jp [Nagoya Institute of Technology, Gokiso, Showa, Nagoya, Aichi (Japan); Rashid, M.; Syakirin, A. [Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia)

    2016-07-06

    We report the experimental results for new type electrochemical capacitor using iodine redox reaction in single-walled carbon nanotubes (SWCNTs). It was found that the energy density of the present redox capacitor using SWCNTs is almost three times larger than that of the normal electric double layer capacitor.

  7. Rough Electrode Creates Excess Capacitance in Thin-Film Capacitors

    NARCIS (Netherlands)

    Torabi, Solmaz; Cherry, Megan; Duijnstee, Elisabeth A.; Le Corre, Vincent M.; Qiu, Li; Hummelen, Jan C.; Palasantzas, George; Koster, L. Jan Anton

    2017-01-01

    The parallel-plate capacitor equation is widely used in contemporary material research for nanoscale applications and nanoelectronics. To apply this equation, flat and smooth electrodes are assumed for a capacitor. This essential assumption is often violated for thin-film capacitors because the

  8. Simulation of polar stratospheric clouds in the chemistry-climate-model EMAC via the submodel PSC

    Directory of Open Access Journals (Sweden)

    O. Kirner

    2011-03-01

    Full Text Available The submodel PSC of the ECHAM5/MESSy Atmospheric Chemistry model (EMAC has been developed to simulate the main types of polar stratospheric clouds (PSC. The parameterisation of the supercooled ternary solutions (STS, type 1b PSC in the submodel is based on Carslaw et al. (1995b, the thermodynamic approach to simulate ice particles (type 2 PSC on Marti and Mauersberger (1993. For the formation of nitric acid trihydrate (NAT particles (type 1a PSC two different parameterisations exist. The first is based on an instantaneous thermodynamic approach from Hanson and Mauersberger (1988, the second is new implemented and considers the growth of the NAT particles with the aid of a surface growth factor based on Carslaw et al. (2002. It is possible to choose one of this NAT parameterisation in the submodel. This publication explains the background of the submodel PSC and the use of the submodel with the goal of simulating realistic PSC in EMAC.

  9. Isolation and characterization of a proteinase K-sensitive PrPSc fraction.

    Science.gov (United States)

    Pastrana, Miguel A; Sajnani, Gustavo; Onisko, Bruce; Castilla, Joaquín; Morales, Rodrigo; Soto, Claudio; Requena, Jesús R

    2006-12-26

    Recent studies have shown that a sizable fraction of PrPSc present in prion-infected tissues is, contrary to previous conceptions, sensitive to digestion by proteinase K (PK). This finding has important implications in the context of diagnosis of prion disease, as PK has been extensively used in attempts to distinguish between PrPSc and PrPC. Even more importantly, PK-sensitive PrPSc (sPrPSc) might be essential to understand the process of conversion and aggregation of PrPC leading to infectivity. We have isolated a fraction of sPrPSc. This material was obtained by differential centrifugation at an intermediate speed of Syrian hamster PrPSc obtained through a conventional procedure based on ultracentrifugation in the presence of detergents. PK-sensitive PrPSc is completely degraded under standard conditions (50 mug/mL of proteinase K at 37 degrees C for 1 h) and can also be digested with trypsin. Centrifugation in a sucrose gradient showed sPrPSc to correspond to the lower molecular weight fractions of the continuous range of oligomers that constitute PrPSc. PK-sensitive PrPSc has the ability to convert PrPC into protease-resistant PrPSc, as assessed by the protein misfolding cyclic amplification assay (PMCA). Limited proteolysis of sPrPSc using trypsin allows for identification of regions that are particularly susceptible to digestion, i.e., are partially exposed and flexible; we have identified as such the regions around residues K110, R136, R151, K220, and R229. PK-sensitive PrPSc isolates should prove useful for structural studies to help understand fundamental issues of the molecular biology of PrPSc and in the quest to design tests to detect preclinical prion disease.

  10. Capacitor Monitoring for Modular Multilevel Converters

    DEFF Research Database (Denmark)

    Deng, Fujin; Liu, Dong; Wang, Yanbo

    2017-01-01

    ). The capacitor monitoring in each SM of the MMC is an important issue, which would affect the performance of the MMC. This paper proposed an effective monitoring method for the capacitance in each SM of the MMC. The proposed method reveals the relationship between the arm average capacitance and the capacitance...

  11. Low-Voltage Switched-Capacitor Circuits

    DEFF Research Database (Denmark)

    Bidari, E.; Keskin, M.; Maloberti, F.

    1999-01-01

    Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications....

  12. Capacitors and Resistance-Capacitance Networks.

    Science.gov (United States)

    Balabanian, Norman; Root, Augustin A.

    This programed textbook was developed under a contract with the United States Office of Education as Number 5 in a series of materials for use in an electrical engineering sequence. It is divided into three parts--(1) capacitors, (2) voltage-current relationships, and (3) simple resistance-capacitance networks. (DH)

  13. Equal Plate Charges on Series Capacitors?

    Science.gov (United States)

    Illman, B. L.; Carlson, G. T.

    1994-01-01

    Provides a line of reasoning in support of the contention that the equal charge proposition is at best an approximation. Shows how the assumption of equal plate charge on capacitors in series contradicts the conservative nature of the electric field. (ZWH)

  14. Modeling of charge switching in ferroelectric capacitors.

    Science.gov (United States)

    Sun, Shunming; Kalkur, Thottam S

    2004-07-01

    To simulate charge switching in ferroelectric capacitors, a pair of exponential growth and decay currents is mapped to the process of polarization reversal. This is based on the fact that these exponential currents [i.e., i = I(m) e(t/tau) (t or = 0)], are completely specified by two constants I(m) and tau and each accommodates an integral charge Q = I(m) x tau. Equating this charge to the remanent spontaneous polarization allows for the modeling of switching current. For practical circuit simulations for charge switching, this modeling of switching current is simplified to an exponential decay current whose integral charge is set equal to the total reversed spontaneous polarization. This is because an exponential decay current can be conveniently implemented by charging a series resistor and capacitor (RC) circuit with a pulse-voltage source. The voltage transitions of the pulse source are associated with the polarization reversal and can be controlled with a noninverting Schmitt trigger that toggles at the positive and negative coercive voltages of a ferroelectric capacitor. The final circuit model incorporates such electrical and geometrical parameters as capacitance, remanent spontaneous polarization, coercive field, electrode area, and film thickness of a ferroelectric, thin-film capacitor.

  15. Capacitor discharge process for welding braided cable

    Science.gov (United States)

    Wilson, Rick D.

    1995-01-01

    A capacitor discharge process for welding a braided cable formed from a plurality of individual cable strands to a solid metallic electrically conductive member comprises the steps of: (a) preparing the electrically conductive member for welding by bevelling one of its end portions while leaving an ignition projection extending outwardly from the apex of the bevel; (b) clamping the electrically conductive member in a cathode fixture; (c) connecting the electrically conductive member clamped in the cathode fixture to a capacitor bank capable of being charged to a preselected voltage value; (d) preparing the braided cable for welding by wrapping one of its end portions with a metallic sheet to form a retaining ring operable to maintain the individual strands of the braided cable in fixed position within the retaining ring; (e) clamping the braided cable and the retaining ring as a unit in an anode fixture so that the wrapped end portion of the braided cable faces the ignition projection of the electrically conductive member; and (f) moving the cathode fixture towards the anode fixture until the ignition projection of the electrically conductive member contacts the end portion of the braided cable thereby allowing the capacitor bank to discharge through the electrically conductive member and through the braided cable and causing the electrically conductive member to be welded to the braided cable via capacitor discharge action.

  16. Effects of Radiation on Capacitor Dielectrics

    Science.gov (United States)

    Bouquet, F. L.; Somoano, R. B.; Frickland, P. O.

    1987-01-01

    Data gathered on key design parameters. Report discusses study of electrical and mechanical properties of irradiated polymer dielectric materials. Data compiled for use by designers of high-energy-density capacitors that operate in presence of ionizing radiation. Study focused on polycarbonates, polyetheretherketones, polymethylpentenes, polyimides (including polyetherimide), polyolefins, polysulfones (including polyethersulfone and polyphenylsulfone), and polyvinylidene fluorides.

  17. Hydrogel membrane electrolyte for electrochemical capacitors

    Indian Academy of Sciences (India)

    Administrator

    poly(vinyl alcohol)-based hydrogel membranes (PHMEs) as electrolytes for electrochemical capacitors have been reported. Varying HClO4 dopant concentration leads to different characteristics of the capaci- tors. The EC comprising PHME doped with 2 M HClO4 and black pearl carbon (BPC) electrodes has been found to ...

  18. Charging a Capacitor with a Photovoltaic Module

    Science.gov (United States)

    Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco; Navarro, Luis Barba

    2017-01-01

    Charging a capacitor with a photovoltaic module is an experiment which reveals a lot about the modules characteristics. It is customary to represent these characteristics with an equivalent circuit whose elements represent its physical parameters. The behavior of a photovoltaic module is very similar to that of a single cell but the electric…

  19. Charge and Energy Stored in a Capacitor

    Science.gov (United States)

    Kraftmakher, Yaakov

    2012-01-01

    Using a data-acquisition system, the charge and energy stored in a capacitor are measured and displayed during the charging/discharging process. The experiment is usable as a laboratory work and/or a lecture demonstration. (Contains 3 figures.)

  20. 2017 NEPP Tasks Update for Ceramic and Tantalum Capacitors

    Science.gov (United States)

    Teverovsky, Alexander A.

    2017-01-01

    This presentation gives an overview of current NEPP tasks on ceramic and tantalum capacitors and plans for the future. It includes tasks on leakage currents, gas generation and case deformation in wet tantalum capacitors; ESR degradation and acceleration factors in MnO2 and polymer cathode capacitors. Preliminary results on the effect of moisture on degradation of reverse currents in MnO2 tantalum capacitors are discussed. Latest results on mechanical characteristics of MLCCs and modeling of degradation of leakage currents in BME capacitors with defects are also presented.

  1. Split warhead simultaneous impact

    Directory of Open Access Journals (Sweden)

    Rahul Singh Dhari

    2017-12-01

    Full Text Available A projectile system is proposed to improve efficiency and effectiveness of damage done by anti-tank weapon system on its target by designing a ballistic projectile that can split into multiple warheads and engage a target at the same time. This idea has been developed in interest of saving time consumed from the process of reloading and additional number of rounds wasted on target during an attack. The proposed system is achieved in three steps: Firstly, a mathematical model is prepared using the basic equations of motion. Second, An Ejection Mechanism of proposed warhead is explained with the help of schematics. Third, a part of numerical simulation which is done using the MATLAB software. The final result shows various ranges and times when split can be effectively achieved. With the new system, impact points are increased and hence it has a better probability of hitting a target.

  2. Humidity Testing of PME and BME Ceramic Capacitors with Cracks

    Science.gov (United States)

    Teverovsky, Alexander A.; Herzberger, Jaemi

    2014-01-01

    Cracks in ceramic capacitors are one of the major causes of failures during operation of electronic systems. Humidity testing has been successfully used for many years to verify the absence of cracks and assure quality of military grade capacitors. Traditionally, only precious metal electrode (PME) capacitors were used in high reliability applications and the existing requirements for humidity testing were developed for this type of parts. With the advance of base metal electrode (BME) capacitors, there is a need for assessment of the applicability of the existing techniques for the new technology capacitors. In this work, variety of different PME and BME capacitors with introduced cracks were tested in humid environments at different voltages and temperatures. Analysis of the test results indicates differences in the behavior and failure mechanisms for BME and PME capacitors and the need for different testing conditions.

  3. Faraday Rotator 5 kV Capacitor Bank

    International Nuclear Information System (INIS)

    Fetterman, C.C.

    1975-01-01

    A Faraday rotator 5 kV capacitor bank is a pulsed output power supply used to energize Faraday rotators for optical isolation in the ''LLL kJ Glass Laser System.'' Each supply contains either one, two or three parallel 240 μF storage capacitors depending on the size of the isolator used. Generally, the ''A*''(216 μH) isolator is energized with one capacitor, the ''A''(116 μH) isolator uses two capacitors and the ''B''(87 μH) isolator requires three capacitors. All models of isolators have been tested with four capacitors under maximum voltage and 25 feet of RG-217 cable with no hazardous effects. Except for the number of capacitors in each unit, the supplies are otherwise physically identical

  4. On split Lie triple systems

    Indian Academy of Sciences (India)

    We also introduced in [1] techniques of connection of roots in the framework of split Lie algebras. In the present paper we extend these techniques to the framework of split Lie triple systems so as to obtain a generalization of the results in [1]. We consider the wide class of split Lie triple systems (which contains the class of.

  5. Generation of an iPSC line from a patient with tyrosine hydroxylase (TH) deficiency: TH-1 iPSC.

    Science.gov (United States)

    Jung-Klawitter, Sabine; Blau, Nenad; Sebe, Attila; Ebersold, Juliane; Göhring, Gudrun; Opladen, Thomas

    2016-11-01

    Fibroblasts from a male patient with compound heterozygous variants in the tyrosine hydroxylase gene (TH; OMIM: 191290; c.[385-C>T]; [692-G>C]/p.[R129*]; [R231P]), the rate-limiting enzyme for dopamine synthesis, were reprogrammed to iPSCs using episomal reprogramming delivering the reprogramming factors Oct3/4, Sox2, L-Myc, Lin28, Klf4 and p53 shRNA Okita et al. (2011). Pluripotency of TH-1 iPSC was verified by immunohistochemistry and RT-PCR analysis. Cells exhibited a normal karyotype and differentiated spontaneously into the 3 germ layers in vitro. TH-1 iPSC represents the first model system to study the pathomechanism of this rare metabolic disease and provides a useful tool for drug testing. Copyright © 2016 Michael Boutros, German Cancer Research Center, Heidelberg, Germany. Published by Elsevier B.V. All rights reserved.

  6. Matching Properties of Femtofarad and Sub-Femtofarad MOM Capacitors

    KAUST Repository

    Omran, Hesham

    2016-04-21

    Small metal-oxide-metal (MOM) capacitors are essential to energy-efficient mixed-signal integrated circuit design. However, only few reports discuss their matching properties based on large sets of measured data. In this paper, we report matching properties of femtofarad and sub-femtofarad MOM vertical-field parallel-plate capacitors and lateral-field fringing capacitors. We study the effect of both the finger-length and finger-spacing on the mismatch of lateral-field capacitors. In addition, we compare the matching properties and the area efficiency of vertical-field and lateral-field capacitors. We use direct mismatch measurement technique, and we illustrate its feasibility using experimental measurements and Monte Carlo simulations. The test-chips are fabricated in a 0.18 \\\\mutext{m} CMOS process. A large number of test structures is characterized (4800 test structures), which improves the statistical reliability of the extracted mismatch information. Despite conventional wisdom, extensive measurements show that vertical-field and lateral-field MOM capacitors have the same matching properties when the actual capacitor area is considered. Measurements show that the mismatch depends on the capacitor area but not on the spacing; thus, for a given mismatch specification, the lateral-field MOM capacitor can have arbitrarily small capacitance by increasing the spacing between the capacitor fingers, at the expense of increased chip area.

  7. Immunoreactivity of specific epitopes of PrPSc is enhanced by pretreatment in a hydrated autoclave.

    Science.gov (United States)

    Yokoyama, T; Momotani, E; Kimura, K; Yuasa, N

    1996-01-01

    An abnormal protein (PrPSc) accumulates in animals affected with scrapie. Immunoblotting procedures have been used widely to detect PrPSc. Blotted membranes were subjected to pretreatment in a hydrated autoclave, and the subsequent immunoreactivity of PrPSc was examined. The immunoreactivity of PrPSc to antisera against the synthetic peptides of the mouse PrP amino acid sequences 199 to 208 and 213 to 226 was enhanced by the pretreatment. However, the reactivity to antisera of peptide sequences 100 to 115 and 165 to 174 was not affected. The antibody-binding ability of the specific epitopes which are located close to the C-terminal end of PrP27-30 the proteinase-resistant portion of PrPSc, was enhanced by pretreatment in a hydrated autoclave. This pretreatment increased the sensitivity of PrPSc, and it would be useful for diagnosis of scrapie. PMID:8807215

  8. Super dielectric capacitor using scaffold dielectric

    OpenAIRE

    Phillips, Jonathan

    2018-01-01

    Patent A capacitor having first and second electrodes and a scaffold dielectric. The scaffold dielectric comprises an insulating material with a plurality of longitudinal channels extending across the dielectric and filled with a liquid comprising cations and anions. The plurality of longitudinal channels are substantially parallel and the liquid within the longitudinal channels generally has an ionic strength of at least 0.1. Capacitance results from the migrations of...

  9. Diagnostics and performance evaluation of multikilohertz capacitors

    International Nuclear Information System (INIS)

    McDuff, G.; Nunnally, W.C.; Rust, K.; Sarjeant, J.

    1980-01-01

    The observed performance of nanofarad polypropylene-silicone oil, mica paper, and polytetrafluoroethylene-silicone oil capacitors discharged in a 100-ns, 1-kA pulse with a pulse repetition frequency of 1 kHz is presented. The test facility circuit, diagnostic parameters, and the preliminary test schedule are outlined as a basis for discussion of the observed failure locations and proposed failure mechanisms. Most of the test data and discussion presented involves the polypropylene-silicone oil units

  10. Materials Development for Commercial Multilayer Ceramic Capacitors

    OpenAIRE

    Mikkenie, R.

    2011-01-01

    Electronic devices like notebooks, smart phones, GPS units, LED TVs and other daily life applications are produced with increased functionality and complexity from year to year. Today’s electronic devices must be equipped with new smart electronic circuitry designs to add more functionality within a single device, while not making them larger in size. As the electronic circuits are made of various components, active semiconducting chips and passive components, like resistors, capacitors and i...

  11. Ionic strength and transition metals control PrPSc protease resistance and conversion-inducing activity.

    Science.gov (United States)

    Nishina, Koren; Jenks, Samantha; Supattapone, Surachai

    2004-09-24

    The essential component of infectious prions is a misfolded protein termed PrPSc, which is produced by conformational change of a normal host protein, PrPC. It is currently unknown whether PrPSc molecules exist in a unique conformation or whether they are able to undergo additional conformational changes. Under commonly used experimental conditions, PrPSc molecules are characteristically protease-resistant and capable of inducing the conversion of PrPC molecules into new PrPSc molecules. We describe the effects of ionic strength, copper, and zinc on the conformation-dependent protease resistance and conversion-inducing activity of PrPSc molecules in scrapie-infected hamster brains. In the absence of divalent cations, PrPSc molecules were > 20-fold more sensitive to proteinase K digestion in low ionic strength buffers than in high ionic strength buffers. Addition of micromolar concentrations of copper or zinc ions restored the protease resistance of PrPSc molecules under conditions of low ionic strength. These transition metals also controlled the conformation of purified truncated PrP-(27-30) molecules at low ionic strength, confirming that the N-terminal octapeptide repeat region of PrPSc is not required for binding to copper or zinc ions. The protease-sensitive and protease-resistant conformations of PrPSc were reversibly interchangeable, and only the protease-resistant conformation of PrPSc induced by high ionic strength was able to induce the formation of new protease-resistant PrP (PrPres) molecules in vitro. These findings show that PrPSc molecules are structurally interconvertible and that only a subset of PrPSc conformations are able to induce the conversion of other PrP molecules. Copyright 2004 American Society for Biochemistry and Molecular Biology, Inc.

  12. Advancing induced pluripotent stem cell (iPSC) technology by assessing genetic instability and immune response

    OpenAIRE

    Requena Osete, Jordi

    2017-01-01

    [eng] Induced pluripotent stem cells (iPSC) can be made from adult somatic cells by reprogramming them with Oct4, Sox2, Klf4 and c-Myc. IPSC have given rise to a new technology to study and treat human disease (Takahashi et al., 2007). However, before iPSC clinical application, we need to step back and address two main challenges: (i) Genetic stability of iPSC. (ii) Immune response of iPSC-derived cells. To address these key issues, the overall mission of this PhD thesis is to adva...

  13. PrPSc in Salivary Glands of Scrapie-Affected Sheep▿

    OpenAIRE

    Vascellari, Marta; Nonno, Romolo; Mutinelli, Franco; Bigolaro, Michela; Di Bari, Michele Angelo; Melchiotti, Erica; Marcon, Stefano; D'Agostino, Claudia; Vaccari, Gabriele; Conte, Michela; De Grossi, Luigi; Rosone, Francesca; Giordani, Francesco; Agrimi, Umberto

    2007-01-01

    The salivary glands of scrapie-affected sheep and healthy controls were investigated for the presence of the pathological prion protein (PrPSc). PrPSc was detected in major (parotid and mandibular) and minor (buccal, labial, and palatine) salivary glands of naturally and experimentally infected sheep. Using Western blotting, the PrPSc concentration in glands was estimated to be 0.02 to 0.005% of that in brain. Immunohistochemistry revealed intracellular depositions of PrPSc in ductal and acin...

  14. Alternative fates of newly formed PrPSc upon prion conversion on the plasma membrane

    OpenAIRE

    Goold, Rob; McKinnon, Chris; Rabbanian, Samira; Collinge, John; Schiavo, Giampietro; Tabrizi, Sarah J.

    2013-01-01

    Prion diseases are fatal neurodegenerative diseases characterised by the accumulation of misfolded prion protein (PrPSc) in the brain. They are caused by the templated misfolding of normal cellular protein, PrPC, by PrPSc. We have recently generated a unique cell system in which epitope-tagged PrPC competent to produce bona fide PrPSc is expressed in neuroblastoma cells. Using this system we demonstrated that PrPSc forms on the cell surface within minutes of prion exposure. Here, we describe ...

  15. Capacitor performance limitations in high power converter applications

    DEFF Research Database (Denmark)

    El-Khatib, Walid Ziad; Holbøll, Joachim; Rasmussen, Tonny Wederberg

    2013-01-01

    High voltage low inductance capacitors are used in converters as HVDC-links, snubber circuits and sub model (MMC) capacitances. They facilitate the possibility of large peak currents under high frequent or transient voltage applications. On the other hand, using capacitors with larger equivalent...... series inductances include the risk of transient overvoltages, with a negative effect on life time and reliability of the capacitors. These allowable limits of such current and voltage peaks are decided by the ability of the converter components, including the capacitors, to withstand them over...... ratings and capacitances where investigated and compared a) on a component scale, characterizing the capacitors transient performance and b) as part of different converter applications, where the series inductance plays a role. In that way, better insight is achieved on how the capacitor construction can...

  16. Thermodynamic energy exchange in a moving plate capacitor.

    Science.gov (United States)

    Davis, B. R.; Abbott, D.; Parrondo, J. M. R.

    2001-09-01

    In this paper we describe an apparent paradox concerning a moving plate capacitor driven by thermal noise from a resistor. The plates are attracted together, but a demon restores the plates of the capacitor to their original position when the voltage across the capacitor is small-hence only small forces are present for the demon to work against. The demon has to work harder than this to avoid the situation of perpetual motion, but the open question is how? This is unsolved, however we explore the concept of a moving plate capacitor by examining the case where it is still excited by thermal noise, but where the restoring force on the capacitor plates is provided by a simple spring rather than some unknown demon. We display simulation results with interesting behavior, particularly where the capacitor plates collide with each other. (c) 2001 American Institute of Physics.

  17. Capacitor requirements for controlled thermonuclear experiments and reactors

    International Nuclear Information System (INIS)

    Boicourt, G.P.; Hoffman, P.S.

    1975-01-01

    Future controlled thermonuclear experiments as well as controlled thermonuclear reactors will require substantial numbers of capacitors. The demands on these units are likely to be quite severe and quite different from the normal demands placed on either present energy storage capacitors or present power factor correction capacitors. It is unlikely that these two types will suffice for all necessary Controlled Thermonuclear Research (CTR) applications. The types of capacitors required for the various CTR operating conditions are enumerated. Factors that influence the life, cost and operating abilities of these types of capacitors are discussed. The problems of capacitors in a radiation environment are considered. Areas are defined where future research is needed. Some directions that this research should take are suggested. (U.S.)

  18. Super capacitor modeling with artificial neural network (ANN)

    Energy Technology Data Exchange (ETDEWEB)

    Marie-Francoise, J.N.; Gualous, H.; Berthon, A. [Universite de Franche-Comte, Lab. en Electronique, Electrotechnique et Systemes (L2ES), UTBM, INRETS (LRE T31) 90 - Belfort (France)

    2004-07-01

    This paper presents super-capacitors modeling using Artificial Neural Network (ANN). The principle consists on a black box nonlinear multiple inputs single output (MISO) model. The system inputs are temperature and current, the output is the super-capacitor voltage. The learning and the validation of the ANN model from experimental charge and discharge of super-capacitor establish the relationship between inputs and output. The learning and the validation of the ANN model use experimental results of 2700 F, 3700 F and a super-capacitor pack. Once the network is trained, the ANN model can predict the super-capacitor behaviour with temperature variations. The update parameters of the ANN model are performed thanks to Levenberg-Marquardt method in order to minimize the error between the output of the system and the predicted output. The obtained results with the ANN model of super-capacitor and experimental ones are in good agreement. (authors)

  19. Performance of thin-film ferroelectric capacitors for EMC decoupling.

    Science.gov (United States)

    Li, Huadong; Subramanyam, Guru

    2008-12-01

    This paper studied the effects of thin-film ferroelectrics as decoupling capacitors for electromagnetic compatibility applications. The impedance and insertion loss of PZT capacitors were measured and compared with the results from commercial off-the-shelf capacitors. An equivalent circuit model was extracted from the experimental results, and a considerable series resistance was found to exist in ferroelectric capacitors. This resistance gives rise to the observed performance difference around series resonance between ferroelectric PZT capacitors and normal capacitors. Measurements on paraelectric (Ba,Sr)TiO(3)-based integrated varactors do not show this significant resistance. Some analyses were made to investigate the mechanisms, and it was found that it can be due to the hysteresis in the ferroelectric thin films.

  20. Method of manufacturing a shapeable short-resistant capacitor

    Science.gov (United States)

    Taylor, Ralph S.; Myers, John D.; Baney, William J.

    2013-04-02

    A method that employs a novel combination of conventional fabrication techniques provides a ceramic short-resistant capacitor that is bendable and/or shapeable to provide a multiple layer capacitor that is extremely compact and amenable to desirable geometries. The method allows thinner and more flexible ceramic capacitors to be made. The method includes forming a first thin metal layer on a substrate; depositing a thin, ceramic dielectric layer over the metal layer; depositing a second thin metal layer over the dielectric layer to form a capacitor exhibiting a benign failure mode; and separating the capacitor from the substrate. The method may also include bending the resulting capacitor into a serpentine arrangement with gaps between the layers that allow venting of evaporated electrode material in the event of a benign failure.

  1. High power density capacitor and method of fabrication

    Science.gov (United States)

    Tuncer, Enis

    2012-11-20

    A ductile preform for making a drawn capacitor includes a plurality of electrically insulating, ductile insulator plates and a plurality of electrically conductive, ductile capacitor plates. Each insulator plate is stacked vertically on a respective capacitor plate and each capacitor plate is stacked on a corresponding insulator plate in alignment with only one edge so that other edges are not in alignment and so that each insulator plate extends beyond the other edges. One or more electrically insulating, ductile spacers are disposed in horizontal alignment with each capacitor plate along the other edges and the pattern is repeated so that alternating capacitor plates are stacked on alternating opposite edges of the insulator plates. A final insulator plate is positioned at an extremity of the preform. The preform may then be drawn to fuse the components and decrease the dimensions of the preform that are perpendicular to the direction of the draw.

  2. A compact 100 kV high voltage glycol capacitor.

    Science.gov (United States)

    Wang, Langning; Liu, Jinliang; Feng, Jiahuai

    2015-01-01

    A high voltage capacitor is described in this paper. The capacitor uses glycerol as energy storage medium, has a large capacitance close to 1 nF, can hold off voltages of up to 100 kV for μs charging time. Allowing for low inductance, the capacitor electrode is designed as coaxial structure, which is different from the common structure of the ceramic capacitor. With a steady capacitance at different frequencies and a high hold-off voltage of up to 100 kV, the glycol capacitor design provides a potential substitute for the ceramic capacitors in pulse-forming network modulator to generate high voltage pulses with a width longer than 100 ns.

  3. A MEMS capacitor with improved RF power handling capability

    OpenAIRE

    Girbau, D.; Otegi, N.; Pradell, L.; Lázaro, A.

    2005-01-01

    This paper presents a structure of MEMS capacitor providing independence of its nominal capacity and tuning range from the applied RF signal power. The capacitor includes a third parallel plate acting as an electrode to which an extra DC voltage is applied to compensate for the self-actuation effect. This means that the device can be used in many applications working under different RF power conditions, without changing its performance – nominal capacity and tuning range –. Capacitor design c...

  4. Metallized Film Capacitor Lifetime Evaluation and Failure Mode Analysis

    OpenAIRE

    Gallay, R.

    2016-01-01

    One of the main concerns for power electronic engineers regarding capacitors is to predict their remaining lifetime in order to anticipate costly failures or system unavailability. This may be achieved using a Weibull statistical law combined with acceleration factors for the temperature, the voltage, and the humidity. This paper discusses the different capacitor failure modes and their effects and consequences. One of the main concerns for power electronic engineers regarding capacitors i...

  5. Design techniques for switched capacitor adaptive line equlizer

    OpenAIRE

    Nakayama, Kenji; Sato, Yayoi; Kuranishi, Yoshiaki

    1985-01-01

    This paper describes design techniques for a switched capacitor adaptive line equalizer which is applied to high speed (200 kb/s) digital transmission over analog subscriber loops. An equalizer transfer function is approximated so as to minimize intersymbol interference of an isolated pulse response. Optimum pole-zero location, which is suited to line characteristics in a wide frequency band, is also discussed. In order to attain high accuracy capacitor ratios using a small unit capacitor, ca...

  6. Fabrication of Flexible Super Capacitor Using Laser Lightscribe Technique

    OpenAIRE

    Joseph, Gladson; Kirubaraj, A. Alfred; Satheesh, U.; Devaprakasam, D.

    2014-01-01

    Super capacitors are promising energy storage devices due to their capability of delivering high peak current and storing high amount of energy in a short time with very low internal power loss. We fabricated the graphene or graphite oxide super-capacitor using laser Lightscribe technique. We prepared graphite oxide by modified hummers method and used PET film as a flexible substrate on which graphite oxide (GO) was coated. Using Lightscribe drive and software, the super-capacitor configurati...

  7. Reliability of capacitors for DC-link applications - An overview

    OpenAIRE

    Wang, Huai; Blaabjerg, Frede

    2013-01-01

    DC-link capacitors are an important part in the majority of power electronic converters which contribute to cost, size and failure rate on a considerable scale. From capacitor users' viewpoint, this paper presents a review on the improvement of reliability of DC-link in power electronic converters from two aspects: 1) reliability-oriented DC-link design solutions; 2) conditioning monitoring of DC-link capacitors during operation. Failure mechanisms, failure modes and lifetime models of capaci...

  8. Capacitor performance limitations in high power converter applications

    OpenAIRE

    El-Khatib, Walid Ziad; Holbøll, Joachim; Rasmussen, Tonny Wederberg

    2013-01-01

    High voltage low inductance capacitors are used in converters as HVDC-links, snubber circuits and sub model (MMC) capacitances. They facilitate the possibility of large peak currents under high frequent or transient voltage applications. On the other hand, using capacitors with larger equivalent series inductances include the risk of transient overvoltages, with a negative effect on life time and reliability of the capacitors. These allowable limits of such current and voltage peaks are decid...

  9. Investigation of the Dissipation Process in Electrolytic Capacitors

    OpenAIRE

    Keith A. Joyner; Leconte Cathey

    1980-01-01

    An experimental study of electrolytic capacitors was conducted, with emphasis on their thermal properties. The capacitors were subjected to charge–discharge cycles with various values of peak voltage. The observed power dissipated did not agree with that which would be expected if constant capacitance and constant effective series resistance (ESR) are assumed for the capacitors. In order to explain the discrepancy, the capacitance and ESR variations were measured with respect to voltage, temp...

  10. Increasing Electric Field Strength of Polymer Capacitors (Preprint)

    Science.gov (United States)

    2017-10-31

    AFRL-RX-WP-JA-2017-0496 INCREASING ELECTRIC FIELD STRENGTH OF POLYMER CAPACITORS (PREPRINT) Fahima Ouchen KBRWyle James Grote...POLYMER CAPACITORS (PREPRINT) 5a. CONTRACT NUMBER FA8650-15-D-5518 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F 6. AUTHOR(S) 1) Fahima...ABSTRACT (Maximum 200 words) Increased electric field breakdown in several polymer-based capacitor dielectrics, including biaxially oriented

  11. Aging Methodologies and Prognostic Health Management for Electrolytic Capacitors

    Data.gov (United States)

    National Aeronautics and Space Administration — Understanding the ageing mechanisms of electronic components critical avionics systems such as the GPS and INAV are of critical importance. Electrolytic capacitors...

  12. Accelerated Aging Experiments for Capacitor Health Monitoring and Prognostics

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper discusses experimental setups for health monitoring and prognostics of electrolytic capacitors under nominal operation and accelerated aging conditions....

  13. Design and Characterization of Vertical Mesh Capacitors in Standard CMOS

    OpenAIRE

    Christensen, Kåre Tais

    2001-01-01

    This paper shows how good RF capacitors can be made in a standard digital CMOS process. The capacitors which are also well suited for binary weighted switched capacitor banks show very good RF performance: Q-values of 57 at 4.0 GHz, a density of 0.27 fF/μ2, 2.2 μm wide shielded unit capacitors, 6% bottom plate capacitance, better than 3-5% process variation and negligible series inductance. Further, a simple yet accurate method is presented that allows hand calculation of the capacitance valu...

  14. Evaluation of Case Size 0603 BME Ceramic Capacitors

    Science.gov (United States)

    Teverovsky, Alexander A.

    2015-01-01

    High volumetric efficiency of commercial base metal electrode (BME) ceramic capacitors allows for a substantial reduction of weight and sizes of the parts compared to currently used military grade precious metal electrode (PME) capacitors. Insertion of BME capacitors in space applications requires a thorough analysis of their performance and reliability. In this work, six types of cases size 0603 BME capacitors from three vendors have been evaluated. Three types of multilayer ceramic capacitors (MLCCs) were designed for automotive industry and three types for general purposes. Leakage currents in the capacitors have been measured in a wide range of voltages and temperatures, and measurements of breakdown voltages (VBR) have been used to assess the proportion and severity of defects in the parts. The effect of soldering-related thermal shock stresses was evaluated by analysis of distributions of VBR for parts in 'as is' condition and after terminal solder dip testing at 350 C. Highly Accelerated Life Testing (HALT) at different temperatures was used to assess the activation energy of degradation of leakage currents and predict behavior of the parts at life test and normal operating conditions. To address issues related to rework and manual soldering, capacitors were soldered onto different substrates at different soldering conditions. The results show that contrary to a common assumption that large-size capacitors are mostly vulnerable to soldering stresses, cracking in small size capacitors does happen unless special measures are taken during assembly processes.

  15. Rough Electrode Creates Excess Capacitance in Thin-Film Capacitors.

    Science.gov (United States)

    Torabi, Solmaz; Cherry, Megan; Duijnstee, Elisabeth A; Le Corre, Vincent M; Qiu, Li; Hummelen, Jan C; Palasantzas, George; Koster, L Jan Anton

    2017-08-16

    The parallel-plate capacitor equation is widely used in contemporary material research for nanoscale applications and nanoelectronics. To apply this equation, flat and smooth electrodes are assumed for a capacitor. This essential assumption is often violated for thin-film capacitors because the formation of nanoscale roughness at the electrode interface is very probable for thin films grown via common deposition methods. In this work, we experimentally and theoretically show that the electrical capacitance of thin-film capacitors with realistic interface roughness is significantly larger than the value predicted by the parallel-plate capacitor equation. The degree of the deviation depends on the strength of the roughness, which is described by three roughness parameters for a self-affine fractal surface. By applying an extended parallel-plate capacitor equation that includes the roughness parameters of the electrode, we are able to calculate the excess capacitance of the electrode with weak roughness. Moreover, we introduce the roughness parameter limits for which the simple parallel-plate capacitor equation is sufficiently accurate for capacitors with one rough electrode. Our results imply that the interface roughness beyond the proposed limits cannot be dismissed unless the independence of the capacitance from the interface roughness is experimentally demonstrated. The practical protocols suggested in our work for the reliable use of the parallel-plate capacitor equation can be applied as general guidelines in various fields of interest.

  16. Nanostructured dielectrics for high-temperature capacitors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Space operation places extra physical and structural demands on the power components, including capacitors. Nanostructured dielectrics offer the opportunity to...

  17. Nonmedical application of computed tomography to power capacitor quality assesment

    International Nuclear Information System (INIS)

    Kruger, R.P.

    1981-01-01

    Present research and development efforts at Los Alamos Scientific Laboratory require the design and use of high-efficiency rapid-discharge energy storage capacitors for laser isotope separation and plasma physics programs. In these applications, capacitors are subjected to electrical, mechanical, thermal, and other environmental stresses. These stresses cause the dielectric constant to change due to gasification from arcing at nonsoldering connections, which produce a chemical reduction of the dielectric material. This effectively limits the lifetime of the capacitor. The programs mentioned above require capacitors with a multikilohertz frequency response at a current of tens of kiloamperes and a voltage of at least 100 kV. The lifetime of such capacitors should exceed 10 10 charge/discharge cycles. Such capacitors do not presently exist. The exploration of new capacitor designs will require the use of both electrical functional tests and tests that show the changes in internal physical structure as the capacitor is repeatedly stressed by the charge/discharge cycle. The integration of electrical and structural tests throughout the life cycle of a candidate capacitor makes it imperative that the structural integrity tests be nondestructive. Computed tomography (CT) makes this integration possible. The work reported here is the result of a pilot project designed to show the potential use of CT for this application. This work includes visualization of material defects using both a layered sequence of conventional tomographic slices and orthogonal multiangular pseudoradiographs generated from these slices

  18. Biology of PrPsc accumulation in two natural scrapie-infected sheep flocks.

    Science.gov (United States)

    Caplazi, Patrick; O'Rourke, Katherine; Wolf, Cynthia; Shaw, Daniel; Baszler, Timothy V

    2004-11-01

    Sheep scrapie is a prion disease that requires interaction of exogenous prions with host prion protein (PrP) supporting prion formation. Disease is associated with deposition of a host-generated conformational variant of PrP, PrPsc, in a variety of tissues, including brain, resulting in fatal spongiform encephalopathy. Efficiency of PrPsc formation is determined by polymorphisms in the PrP-coding sequence. This article adds to previous data of natural sheep scrapie, concentrating on the effect of host genotype and age on PrPsc accumulation patterns during preclinical and clinical disease. Two entire scrapie-infected, predominantly Suffolk-cross, sheep flocks euthanized for regulatory purposes were genotyped and analyzed for PrPsc deposition in various tissues using single- and dual-label immunohistochemistry. Scrapie, as defined by PrPsc deposition, occurred in 13/80 sheep. Preclinical disease was evident in nearly 70% of infected sheep, ranging in age from 14 months to 7 years. PrPsc accumulated systemically in the nervous tissue, various lymphoid tissues, both alimentary tract related and non-alimentary tract related, and the placenta. Clinical neurological illness was always associated with spongiform encephalopathy and PrPsc deposition in the brain. Only 6 of 9 sheep with preclinical scrapie had PrPsc deposition in the brain but widespread PrPsc deposition in peripheral lymphoid tissue, supporting previous data showing peripheral PrPsc accumulation preceding deposition in the brain. PrPsc colocalized with a marker for follicular dendritic cells throughout the lymphoid system. PrPsc also accumulated in the peripheral nervous system, particularly the nervous supply of the gastrointestinal tract. Abundant PrPsc was evident in trophoblast cells of placentomes but not in the endometrium, myometrium, or associated nervous plexus. PrPsc deposits were not observed in the mammary parenchyma or bone marrow. Scrapie susceptibility was defined genetically by PrP codon 171

  19. Potential of iPSC-Derived Mesenchymal Stromal Cells for Treating Periodontal Disease

    Directory of Open Access Journals (Sweden)

    K. Hynes

    2018-01-01

    Full Text Available Mesenchymal stromal cell-like populations have been derived from mouse-induced pluripotent stem cells (miPSC-MSC with the capability for tissue regeneration. In this study, murine iPSC underwent differentiation towards an MSC-like immunophenotype. Stable miPSC-MSC cultures expressed the MSC-associated markers, CD73, CD105, and Sca-1, but lacked expression of the pluripotency marker, SSEA1, and hematopoietic markers, CD34 and CD45. Functionally, miPSC-MSC exhibited the potential for trilineage differentiation into osteoblasts, adipocytes, and chondrocytes and the capacity to suppress the proliferation of mitogen-activated splenocytes. The efficacy of miPSC-MSC was assessed in an acute inflammation model following systemic or local delivery into mice with subcutaneous implants containing heat-inactivated P. gingivalis. Histological analysis revealed less inflammatory cellular infiltrate within the sponges in mice treated with miPSC-MSC cells delivered locally rather than systemically. Assessment of proinflammatory cytokines in mouse spleens found that CXCL1 transcripts and protein were reduced in mice treated with miPSC-MSC. In a periodontitis model, mice subjected to oral inoculation with P. gingivalis revealed less bone tissue destruction and inflammation within the jaws when treated with miPSC-MSC compared to PBS alone. Our results demonstrated that miPSC-MSC derived from iPSC have the capacity to control acute and chronic inflammatory responses associated with the destruction of periodontal tissue. Therefore, miPSC-MSC present a promising novel source of stromal cells which could be used in the treatment of periodontal disease and other inflammatory systemic diseases such as rheumatoid arthritis.

  20. Distribution of Peripheral PrPSc in Sheep with Naturally Acquired Scrapie

    Science.gov (United States)

    Garza, María Carmen; Monzón, Marta; Marín, Belén; Badiola, Juan José; Monleón, Eva

    2014-01-01

    Accumulation of prion protein (PrPSc) in the central nervous system is the hallmark of transmissible spongiform encephalopathies. However, in some of these diseases such as scrapie or chronic wasting disease, the PrPSc can also accumulate in other tissues, particularly in the lymphoreticular system. In recent years, PrPSc in organs other than nervous and lymphoid have been described, suggesting that distribution of this protein in affected individuals may be much larger than previously thought. In the present study, 11 non-nervous/non-lymphoid organs from 16 naturally scrapie infected sheep in advanced stages of the disease were examined for the presence of PrPSc. Fourteen infected sheep were of the ARQ/ARQ PRNP genotype and 2 of the VRQ/VRQ, where the letters A, R, Q, and V represent the codes for amino-acids alanine, arginine, glutamine and valine, respectively. Adrenal gland, pancreas, heart, skin, urinary bladder and mammary gland were positive for PrPSc by immunohistochemistry and IDEXX HerdChek scrapie/BSE Antigen EIA Test in at least one animal. Lung, liver, kidney and skeletal muscle exhibited PrPSc deposits by immunohistochemistry only. To our knowledge, this is the first report regarding the presence of PrPSc in the heart, pancreas and urinary bladder in naturally acquired scrapie infections. In some other organs examined, in which PrPSc had been previously detected, PrPSc immunolabeling was observed to be associated with new structures within those organs. The results of the present study illustrate a wide dissemination of PrPSc in both ARQ/ARQ and VRQ/VRQ infected sheep, even when the involvement of the lymphoreticular system is scarce or absent, thus highlighting the role of the peripheral nervous system in the spread of PrPSc. PMID:24828439

  1. Using a Fixed and Switched-Capacitor Bank to Investigate Harmonic Resonance and Capacitor Bank Switching in a Distribution Network

    OpenAIRE

    J.C. Attachie; C.K. Amuzuvi

    2014-01-01

    Harmonic resonance often manifests as high harmonic voltages in a power system. This produces losses and affects other consumers in the grid negatively. Capacitance switching applications also involve not only interrupting capacitive currents, but also the energizing of capacitor banks, cables and overhead lines. The applications of capacitors are extensively used in power systems for voltage support and power factor correction. However, the main concern arising from the use of capacitors is ...

  2. Ceramic capacitor exhibiting graceful failure by self-clearing, method for fabricating self-clearing capacitor

    Science.gov (United States)

    Kaufman, David Y [Chicago, IL; Saha, Sanjib [Santa Clara, CA

    2006-08-29

    A short-resistant capacitor comprises an electrically conductive planar support substrate having a first thickness, a ceramic film deposited over the support substrate, thereby defining a ceramic surface; and a metallic film deposited over the ceramic surface, said film having a second thickness which is less than the first thickness and which is between 0.01 and 0.1 microns.

  3. Simulation of capacitor charging power supplies

    Science.gov (United States)

    Newton, S. R.; Nelms, R. M.

    1990-01-01

    By neglecting losses and other nonidealities, the authors were able to derive a simple single-loop equivalent circuit for each mode of operation of the series resonant converter. From these equivalent circuits, a good approximation of the current and voltages within the converter was obtained, despite the simplified approach taken. It is pointed out that designers of capacitor charging power supplies can utilize this approach in deciding what type of control strategy is needed to obtain a desired characteristic. Once the basic topology of the power supply has been determined, a detailed simulation could be implemented using one of the general-purpose software packages available.

  4. Plasminogen: A cellular protein cofactor for PrPSc propagation.

    Science.gov (United States)

    Mays, Charles E; Ryou, Chongsuk

    2011-01-01

    The biochemical essence of prion replication is the molecular multiplication of the disease-associated misfolded isoform of prion protein (PrP), termed PrPSc, in a nucleic acid-free manner. PrP(Sc) is generated by the protein misfolding process facilitated by conformational conversion of the host-encoded cellular PrP to PrP(Sc). Evidence suggests that an auxiliary factor may play a role in PrP(Sc) propagation. We and others previously discovered that plasminogen interacts with PrP, while its functional role for PrPSc propagation remained undetermined. In our recent in vitro PrP conversion study, we showed that plasminogen substantially stimulates PrP(Sc) propagation in a concentration-dependent manner by accelerating the rate of PrP(Sc) generation, while depletion of plasminogen, destabilization of its structure, and interference with the PrP-plasminogen interaction hinder PrP(Sc) propagation. Further investigation in cell culture models confirmed an increase of PrP(Sc) formation by plasminogen. Although molecular basis of the observed activity for plasminogen remain to be addressed, our results demonstrate that plasminogen is the first cellular protein auxiliary factor proven to stimulate PrP(Sc) propagation.

  5. File list: Oth.PSC.05.Cdk9.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.Cdk9.AllCell mm9 TFs and others Cdk9 Pluripotent stem cell SRX236483,SRX...104410 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.Cdk9.AllCell.bed ...

  6. File list: Oth.PSC.10.Biotin.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.Biotin.AllCell mm9 TFs and others Biotin Pluripotent stem cell SRX218273...69,SRX984573,SRX115147,SRX327702,SRX984572,SRX984568,SRX115145,SRX172568,SRX218274 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.Biotin.AllCell.bed ...

  7. File list: Pol.PSC.50.RNA_polymerase_III.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.RNA_polymerase_III.AllCell hg19 RNA polymerase RNA polymerase III Plurip...otent stem cell http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.50.RNA_polymerase_III.AllCell.bed ...

  8. File list: Oth.PSC.50.FOXA2.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.FOXA2.AllCell hg19 TFs and others FOXA2 Pluripotent stem cell SRX701978,...SRX266855,SRX266856,SRX701982,SRX764810,SRX764812,SRX764809,SRX764811,SRX701980,SRX701981 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.50.FOXA2.AllCell.bed ...

  9. File list: Oth.PSC.20.FOXA2.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.FOXA2.AllCell hg19 TFs and others FOXA2 Pluripotent stem cell SRX701978,...SRX266855,SRX266856,SRX764809,SRX701982,SRX764810,SRX764812,SRX764811,SRX701980,SRX701981 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.20.FOXA2.AllCell.bed ...

  10. File list: Oth.PSC.10.FOXA2.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.FOXA2.AllCell hg19 TFs and others FOXA2 Pluripotent stem cell SRX701978,...SRX266855,SRX266856,SRX701981,SRX764809,SRX764810,SRX764811,SRX764812,SRX701982,SRX701980 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.10.FOXA2.AllCell.bed ...

  11. File list: Oth.PSC.05.FOXA2.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.FOXA2.AllCell hg19 TFs and others FOXA2 Pluripotent stem cell SRX701978,...SRX266855,SRX266856,SRX701981,SRX764811,SRX764812,SRX764810,SRX764809,SRX701982,SRX701980 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.05.FOXA2.AllCell.bed ...

  12. File list: Pol.PSC.10.RNA_polymerase_III.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.RNA_polymerase_III.AllCell hg19 RNA polymerase RNA polymerase III Plurip...otent stem cell http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.10.RNA_polymerase_III.AllCell.bed ...

  13. File list: Pol.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.iPS_cells mm9 RNA polymerase Pluripotent stem cell iPS cells SRX97...7435,SRX977434,SRX027462 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.50.AllAg.iPS_cells.bed ...

  14. File list: InP.PSC.20.AllAg.Embryoid_Bodies [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.AllAg.Embryoid_Bodies mm9 Input control Pluripotent stem cell Embryoid B...odies SRX109460,SRX109458,SRX212083,SRX109456,SRX385954,SRX026526 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.20.AllAg.Embryoid_Bodies.bed ...

  15. Methionine Sulfoxides on PrPSc: A Prion-Specific Covalent Signature

    NARCIS (Netherlands)

    Canello, T.; Engelstein, R.; Moshel, O.; Xanthopoulos, K.; Langeveld, J.P.M.; Sklaviadis, T.; Gasset, M.; Gabizon, R.

    2008-01-01

    Prion diseases are fatal neurodegenerative disorders believed to be transmitted by PrPSc, an aberrant form of the membrane protein PrPC. In the absence of an established form-specific covalent difference, the infectious properties of PrPSc were uniquely ascribed to the self-perpetuation properties

  16. File list: Pol.PSC.50.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.mESCs,_differentiated mm9 RNA polymerase Pluripotent stem cell mESCs, different...iated SRX590276 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.50.AllAg.mESCs,_differentiated.bed ...

  17. File list: DNS.PSC.20.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.mESCs,_differentiated mm9 DNase-seq Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.20.AllAg.mESCs,_differentiated.bed ...

  18. File list: DNS.PSC.50.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.50.AllAg.mESCs,_differentiated mm9 DNase-seq Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.50.AllAg.mESCs,_differentiated.bed ...

  19. File list: Pol.PSC.10.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.mESCs,_differentiated mm9 RNA polymerase Pluripotent stem cell mESCs, different...iated SRX590276 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.10.AllAg.mESCs,_differentiated.bed ...

  20. File list: DNS.PSC.05.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.mESCs,_differentiated mm9 DNase-seq Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.05.AllAg.mESCs,_differentiated.bed ...

  1. File list: Pol.PSC.20.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.mESCs,_differentiated mm9 RNA polymerase Pluripotent stem cell mESCs, different...iated SRX590276 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.20.AllAg.mESCs,_differentiated.bed ...

  2. File list: Unc.PSC.20.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.mESCs,_differentiated mm9 Unclassified Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.20.AllAg.mESCs,_differentiated.bed ...

  3. File list: Pol.PSC.05.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.mESCs,_differentiated mm9 RNA polymerase Pluripotent stem cell mESCs, different...iated SRX590276 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.05.AllAg.mESCs,_differentiated.bed ...

  4. File list: DNS.PSC.10.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.mESCs,_differentiated mm9 DNase-seq Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.10.AllAg.mESCs,_differentiated.bed ...

  5. File list: Unc.PSC.50.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.mESCs,_differentiated mm9 Unclassified Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.50.AllAg.mESCs,_differentiated.bed ...

  6. File list: Unc.PSC.05.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.05.AllAg.mESCs,_differentiated mm9 Unclassified Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.05.AllAg.mESCs,_differentiated.bed ...

  7. File list: Unc.PSC.10.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.10.AllAg.mESCs,_differentiated mm9 Unclassified Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.10.AllAg.mESCs,_differentiated.bed ...

  8. File list: Oth.PSC.10.TEAD4.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.TEAD4.AllCell hg19 TFs and others TEAD4 Pluripotent stem cell SRX190301,...SRX378124,SRX378125 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.10.TEAD4.AllCell.bed ...

  9. File list: His.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.05.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX317576,S...077,SRX317607 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.05.AllAg.iPS_cells.bed ...

  10. File list: ALL.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.iPS_cells hg19 All antigens Pluripotent stem cell iPS cells SRX088...16,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.50.AllAg.iPS_cells.bed ...

  11. File list: His.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX110015,S...315,SRX381309 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.20.AllAg.iPS_cells.bed ...

  12. File list: NoD.PSC.50.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.50.AllAg.STAP_cells mm9 No description Pluripotent stem cell STAP cells SRX...472660,SRX472654,SRX472663,SRX472655,SRX472665,SRX472662,SRX472656,SRX472661,SRX472664 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.50.AllAg.STAP_cells.bed ...

  13. File list: ALL.PSC.50.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.STAP_cells mm9 All antigens Pluripotent stem cell STAP cells SRX47...2660,SRX472654,SRX472663,SRX472655,SRX472665,SRX472662,SRX472656,SRX472661,SRX472664 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.50.AllAg.STAP_cells.bed ...

  14. File list: NoD.PSC.10.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.STAP_cells mm9 No description Pluripotent stem cell STAP cells SRX...472660,SRX472654,SRX472663,SRX472665,SRX472656,SRX472662,SRX472661,SRX472664,SRX472655 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.STAP_cells.bed ...

  15. File list: ALL.PSC.20.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.STAP_cells mm9 All antigens Pluripotent stem cell STAP cells SRX47...2660,SRX472654,SRX472663,SRX472661,SRX472656,SRX472665,SRX472662,SRX472655,SRX472664 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.20.AllAg.STAP_cells.bed ...

  16. File list: ALL.PSC.05.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.05.AllAg.STAP_cells mm9 All antigens Pluripotent stem cell STAP cells SRX47...2660,SRX472663,SRX472654,SRX472665,SRX472656,SRX472662,SRX472661,SRX472664,SRX472655 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.05.AllAg.STAP_cells.bed ...

  17. File list: ALL.PSC.10.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.STAP_cells mm9 All antigens Pluripotent stem cell STAP cells SRX47...2660,SRX472654,SRX472663,SRX472665,SRX472656,SRX472662,SRX472661,SRX472664,SRX472655 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.10.AllAg.STAP_cells.bed ...

  18. File list: Oth.PSC.05.Biotin.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.Biotin.AllCell mm9 TFs and others Biotin Pluripotent stem cell SRX218273...67,SRX115147,SRX312228,SRX984569,SRX984573,SRX984572,SRX984568,SRX218274,SRX172568 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.Biotin.AllCell.bed ...

  19. File list: Oth.PSC.20.Biotin.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.Biotin.AllCell mm9 TFs and others Biotin Pluripotent stem cell SRX477548...44,SRX115145,SRX984568,SRX172568,SRX218274,SRX327702,SRX312228,SRX213794,SRX327701 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.Biotin.AllCell.bed ...

  20. File list: InP.PSC.50.Input_control.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.50.Input_control.AllCell hg19 Input control Input control Pluripotent stem ...RX199884,SRX189977 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.50.Input_control.AllCell.bed ...

  1. File list: InP.PSC.20.Input_control.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.Input_control.AllCell hg19 Input control Input control Pluripotent stem ...RX342850,ERX342851 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.20.Input_control.AllCell.bed ...

  2. File list: Oth.PSC.05.NIPBL.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.NIPBL.AllCell hg19 TFs and others NIPBL Pluripotent stem cell SRX833423,...SRX833420,SRX833422,SRX833421 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.05.NIPBL.AllCell.bed ...

  3. File list: Oth.PSC.20.NIPBL.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.NIPBL.AllCell hg19 TFs and others NIPBL Pluripotent stem cell SRX833423,...SRX833420,SRX833421,SRX833422 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.20.NIPBL.AllCell.bed ...

  4. File list: Oth.PSC.10.NIPBL.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.NIPBL.AllCell hg19 TFs and others NIPBL Pluripotent stem cell SRX833423,...SRX833422,SRX833420,SRX833421 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.10.NIPBL.AllCell.bed ...

  5. File list: Oth.PSC.50.NIPBL.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.NIPBL.AllCell hg19 TFs and others NIPBL Pluripotent stem cell SRX833423,...SRX833420,SRX833421,SRX833422 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.50.NIPBL.AllCell.bed ...

  6. File list: Oth.PSC.20.Nanog.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.Nanog.AllCell mm9 TFs and others Nanog Pluripotent stem cell SRX213808,S...1351,SRX1141349,SRX1141350,SRX651982,SRX213820 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.Nanog.AllCell.bed ...

  7. File list: Oth.PSC.50.Nanog.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.Nanog.AllCell mm9 TFs and others Nanog Pluripotent stem cell SRX213808,S...1349,SRX1141350,SRX1141351,SRX651982,SRX213820 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.Nanog.AllCell.bed ...

  8. File list: Oth.PSC.05.Nanog.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.Nanog.AllCell mm9 TFs and others Nanog Pluripotent stem cell SRX248286,S...3864,SRX1141351,SRX1141350,SRX651982,SRX213820 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.Nanog.AllCell.bed ...

  9. File list: Oth.PSC.20.Men1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.Men1.AllCell mm9 TFs and others Men1 Pluripotent stem cell SRX1311026,SR...X1311023 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.Men1.AllCell.bed ...

  10. File list: Oth.PSC.10.Men1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.Men1.AllCell mm9 TFs and others Men1 Pluripotent stem cell SRX1311026,SRX1311023 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.Men1.AllCell.bed ...

  11. File list: Oth.PSC.50.Men1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.Men1.AllCell mm9 TFs and others Men1 Pluripotent stem cell SRX1311026,SR...X1311023 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.Men1.AllCell.bed ...

  12. File list: Oth.PSC.05.Men1.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.Men1.AllCell mm9 TFs and others Men1 Pluripotent stem cell SRX1311026,SR...X1311023 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.Men1.AllCell.bed ...

  13. File list: Oth.PSC.05.TEAD4.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.TEAD4.AllCell hg19 TFs and others TEAD4 Pluripotent stem cell SRX190301,...SRX378124,SRX378125 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.05.TEAD4.AllCell.bed ...

  14. File list: Oth.PSC.20.TEAD4.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.TEAD4.AllCell hg19 TFs and others TEAD4 Pluripotent stem cell SRX190301,...SRX378124,SRX378125 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.20.TEAD4.AllCell.bed ...

  15. File list: Oth.PSC.50.TEAD4.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.TEAD4.AllCell hg19 TFs and others TEAD4 Pluripotent stem cell SRX190301,...SRX378124,SRX378125 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.50.TEAD4.AllCell.bed ...

  16. File list: Oth.PSC.10.Myc.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.Myc.AllCell mm9 TFs and others Myc Pluripotent stem cell SRX266823,SRX21...3819,SRX213807,SRX213828,SRX266824 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.Myc.AllCell.bed ...

  17. File list: Oth.PSC.20.Myc.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.Myc.AllCell mm9 TFs and others Myc Pluripotent stem cell SRX266823,SRX21...3807,SRX213828,SRX213819,SRX266824 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.Myc.AllCell.bed ...

  18. File list: Oth.PSC.05.Myc.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.Myc.AllCell mm9 TFs and others Myc Pluripotent stem cell SRX266823,SRX21...3819,SRX213807,SRX213828,SRX266824 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.Myc.AllCell.bed ...

  19. File list: Oth.PSC.50.Myc.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.Myc.AllCell mm9 TFs and others Myc Pluripotent stem cell SRX266823,SRX21...3819,SRX213828,SRX213807,SRX266824 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.Myc.AllCell.bed ...

  20. File list: Oth.PSC.50.Biotin.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.Biotin.AllCell mm9 TFs and others Biotin Pluripotent stem cell SRX477548...68,SRX172568,SRX218274,SRX327702,SRX213792,SRX213794,SRX172567,SRX312228,SRX327701 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.Biotin.AllCell.bed ...

  1. File list: His.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.iPS_cells mm9 Histone Pluripotent stem cell iPS cells SRX977417,SR...RX127376,SRX146530,SRX146522,SRX146547,SRX333561,SRX035985,SRX1090869 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.50.AllAg.iPS_cells.bed ...

  2. File list: NoD.PSC.20.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.20.AllAg.STAP_cells mm9 No description Pluripotent stem cell STAP cells SRX...472660,SRX472654,SRX472663,SRX472661,SRX472656,SRX472665,SRX472662,SRX472655,SRX472664 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.20.AllAg.STAP_cells.bed ...

  3. File list: NoD.PSC.05.AllAg.STAP_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.STAP_cells mm9 No description Pluripotent stem cell STAP cells SRX...472660,SRX472663,SRX472654,SRX472665,SRX472656,SRX472662,SRX472661,SRX472664,SRX472655 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.05.AllAg.STAP_cells.bed ...

  4. File list: Pol.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.iPS_cells mm9 RNA polymerase Pluripotent stem cell iPS cells SRX97...7435,SRX027462,SRX977434 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.05.AllAg.iPS_cells.bed ...

  5. File list: ALL.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.iPS_cells mm9 All antigens Pluripotent stem cell iPS cells SRX9774...30,SRX146524,SRX146547,SRX146522 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.10.AllAg.iPS_cells.bed ...

  6. File list: ALL.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.iPS_cells hg19 All antigens Pluripotent stem cell iPS cells SRX088...27,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.20.AllAg.iPS_cells.bed ...

  7. File list: His.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX110016,S...315,SRX381309 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.10.AllAg.iPS_cells.bed ...

  8. Physics based Degradation Modeling and Prognostics of Electrolytic Capacitors under Electrical Overstress Conditions

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper proposes a physics based degradation modeling and prognostics approach for electrolytic capacitors. Electrolytic capacitors are critical components in...

  9. Prognostics Health Management and Physics based failure Models for Electrolytic Capacitors

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper proposes first principles based modeling and prognostics approach for electrolytic capacitors. Electrolytic capacitors and MOSFETs are the two major...

  10. Metallized Film Capacitor Lifetime Evaluation and Failure Mode Analysis

    CERN Document Server

    Gallay, R.

    2015-06-15

    One of the main concerns for power electronic engineers regarding capacitors is to predict their remaining lifetime in order to anticipate costly failures or system unavailability. This may be achieved using a Weibull statistical law combined with acceleration factors for the temperature, the voltage, and the humidity. This paper discusses the different capacitor failure modes and their effects and consequences.

  11. Nanostructured Anodic Multilayer Dielectric Stacked Metal-Insulator-Metal Capacitors.

    Science.gov (United States)

    Karthik, R; Kannadassan, D; Baghini, Maryam Shojaei; Mallick, P S

    2015-12-01

    This paper presents the fabrication of Al2O3/TiO2/Al2O3 metal-insulator-metal (MIM) capacitor using anodization technique. High capacitance density of > 3.5 fF/μm2, low quadratic voltage coefficient of capacitance of capacitor.

  12. Capacitors in Series: A Laboratory Activity to Promote Critical Thinking.

    Science.gov (United States)

    Noll, Ellis D.; Kowalski, Ludwik

    1996-01-01

    Describes experiments designed to explore the distribution of potential difference between two uncharged capacitors when they are suddenly connected to a source of constant voltage. Enables students to explore the evolution of a system in which initial voltage distribution depends on capacitor values, and the final voltage distribution depends on…

  13. Analytical evaluation of DC capacitor RMS current and voltage ...

    Indian Academy of Sciences (India)

    K S GOPALAKRISHNAN

    current in either case can be obtained through repeated digital simulations of the converter under various operating condi- tions. However, it would be elegant to determine the worst- case capacitor RMS current through an analytical expression, relating the capacitor current to the operating conditions such as modulation ...

  14. Trench capacitor and method for producing the same

    NARCIS (Netherlands)

    Liu, J.; Roest, A.L.; Roozeboom, F.; Shabro, V.

    2013-01-01

    A method of fabricating a trench capacitor, and a trench capacitor fabricated thereby, are disclosed. The method involves the use of a vacuum impregnation process for a sol-gel film, to facilitate effective deposition of high-permittivity materials within a trench in a semiconductor substrate, to

  15. DC-to-DC converter comprising a reconfigurable capacitor unit

    NARCIS (Netherlands)

    Klootwijk, J.H.; Bergveld, H.J.; Roozeboom, F.; Reefman, D.; Ruigrok, J.

    2013-01-01

    The present invention relates to a configurable trench multi-capacitor device comprising a trench in a semiconductor substrate. The trench has a lateral extension exceeding 10 micrometer and a trench filling includes a number of at least four electrically conductive capacitor-electrode layers. A

  16. Two-Capacitor Problem: A More Realistic View.

    Science.gov (United States)

    Powell, R. A.

    1979-01-01

    Discusses the two-capacitor problem by considering the self-inductance of the circuit used and by determining how well the usual series RC circuit approximates the two-capacitor problem when realistic values of L, C, and R are chosen. (GA)

  17. Analytical evaluation of DC capacitor RMS current and voltage ...

    Indian Academy of Sciences (India)

    K S GOPALAKRISHNAN

    Abstract. The sizing of the DC-link capacitor in a three-level inverter is based on the RMS current flowing through it. This paper analyses the DC-link capacitor RMS current in a neutral-point clamped (NPC) inverter and expresses the same as a function of modulation index, line-side current amplitude and power factor.

  18. Optimal capacitor sizing and placement based on real time analysis ...

    African Journals Online (AJOL)

    In this paper, optimal capacitor sizing and placement method was used to improve energy efficiency. It involves the placement of capacitors in a specific location with suitable sizing based on the current load of the electrical system. The optimization is done in real time scenario where the sizing and placement of the ...

  19. Charging damage in floating metal-insulator-metal capacitors

    NARCIS (Netherlands)

    Ackaert, Jan; Wang, Zhichun; De Backer, E.; Coppens, P.

    2002-01-01

    In this paper, charging induced damage (CID) to metal-insulator-metal capacitors (MIMC) is reported. The damage is caused by the build up of a voltage potential difference between the two plates of the capacitor. A simple logarithmic relation is discovered between the damage by this voltage

  20. Analytical evaluation of DC capacitor RMS current and voltage ...

    Indian Academy of Sciences (India)

    The sizing of the DC-link capacitor in a three-level inverter is based on the RMS current flowing through it. This paper analyses the DC-link capacitor RMS current in a neutral-point clamped (NPC) inverter and expresses the same as a function of modulation index, line-side current amplitude and power factor. Analytical ...

  1. Impedance Characteristics Modeling of a Two-Terminal Active Capacitor

    DEFF Research Database (Denmark)

    Wang, Haoran; Wang, Huai; Lu, Minghui

    2017-01-01

    to overcome the above issues. In this paper, the modeling of the active capacitor is investigated and a voltage feed-forward compensation scheme is proposed for overshoot reduction. Therefore, the impedance, equivalent capacitance, ESR, and ESL, of the active capacitor can be specified. A case study based...

  2. Direct Mismatch Characterization of femto-Farad Capacitors

    KAUST Repository

    Omran, Hesham

    2015-08-17

    Reducing the capacitance of programmable capacitor arrays, commonly used in analog integrated circuits, is necessary for low-energy applications. However, limited mismatch data is available for small capacitors. We report mismatch measurement for a 2fF poly-insulator-poly (PIP) capacitor, which is the smallest reported PIP capacitor to the best of the authors’ knowledge. Instead of using complicated custom onchip circuitry, direct mismatch measurement is demonstrated and verified using Monte Carlo Simulations and experimental measurements. Capacitive test structures composed of 9 bit programmable capacitor arrays (PCAs) are implemented in a low-cost 0:35m CMOS process. Measured data is compared to mismatch of large PIP capacitors, theoretical models, and recently published data. Measurement results indicate an estimated average relative standard deviation of 0.43% for the 2fF unit capacitor, which is better than the reported mismatch of metal-oxide-metal (MOM) fringing capacitors implemented in an advanced 32nm CMOS process.

  3. Split SUSY Radiates Flavor

    CERN Document Server

    Baumgart, Matthew; Zorawski, Thomas

    2014-01-01

    Radiative flavor models where the hierarchies of Standard Model (SM) fermion masses and mixings are explained via loop corrections are elegant ways to solve the SM flavor puzzle. Here we build such a model in the context of Mini-Split Supersymmetry (SUSY) where both flavor and SUSY breaking occur at a scale of 1000 TeV. This model is consistent with the observed Higgs mass, unification, and WIMP dark matter. The high scale allows large flavor mixing among the sfermions, which provides part of the mechanism for radiative flavor generation. In the deep UV, all flavors are treated democratically, but at the SUSY breaking scale, the third, second, and first generation Yukawa couplings are generated at tree level, one loop, and two loops, respectively. Save for one, all the dimensionless parameters in the theory are O(1), with the exception being a modest and technically natural tuning that explains both the smallness of the bottom Yukawa coupling and the largeness of the Cabibbo angle.

  4. How rivers split

    Science.gov (United States)

    Seybold, H. F.; Yi, R.; Devauchelle, O.; Petroff, A.; Rothman, D.

    2012-12-01

    River networks have fascinated mankind for centuries. They exhibit a striking geometry with similar shapes repeating on all scales. Yet, how these networks form and create these geometries remains elusive. Recently we have shown that channels fed by subsurface flow split at a characteristic angle of 2π/5 unambiguously consistent with our field measurements in a seepage network on the Florida Panhandle (Fig.1). Our theory is based only on the simple hypothesis that the channels grow in the direction at which the ground water enters the spring and classical solutions of subsurface hydrology. Here we apply our analysis to the ramification of large drainage basins and extend our theory to include slope effects. Using high resolution stream networks from the National Hydrography Dataset (NHD), we scrutinize our hypothesis in arbitrary channel networks and investigate the branching angle dependence on Horton-Strahler order and the maturity of the streams.; High-resolution topographic map of valley networks incised by groundwater flow, located on the Florida Panhandle near Bristol, FL.

  5. Split supersymmetry radiates flavor

    Science.gov (United States)

    Baumgart, Matthew; Stolarski, Daniel; Zorawski, Thomas

    2014-09-01

    Radiative flavor models where the hierarchies of Standard Model (SM) fermion masses and mixings are explained via loop corrections are elegant ways to solve the SM flavor puzzle. Here we build such a model in the context of mini-split supersymmetry (SUSY) where both flavor and SUSY breaking occur at a scale of 1000 TeV. This model is consistent with the observed Higgs mass, unification, and dark matter as a weakly interacting massive particle. The high scale allows large flavor mixing among the sfermions, which provides part of the mechanism for radiative flavor generation. In the deep UV, all flavors are treated democratically, but at the SUSY-breaking scale, the third, second, and first generation Yukawa couplings are generated at tree level, one loop, and two loops, respectively. Save for one, all the dimensionless parameters in the theory are O(1), with the exception being a modest and technically natural tuning that explains both the smallness of the bottom Yukawa coupling and the largeness of the Cabibbo angle.

  6. PR3-ANCA: a promising biomarker in primary sclerosing cholangitis (PSC.

    Directory of Open Access Journals (Sweden)

    Laura M Stinton

    Full Text Available The only recognized biomarker for primary sclerosing cholangitis (PSC is atypical anti-neutrophil cytoplasmic antibodies (aANCA, which, in addition to having low sensitivity and specificity, is an indirect immunofluorescence (IIF test lacking the advantages of high throughput and objectivity. Recent reports have shown that antibodies to proteinase-3 (PR3-ANCA might add diagnostic value in inflammatory bowel disease (IBD, specifically in ulcerative colitis (UC. As PSC is associated with IBD, the objective of this study was to evaluate the frequency and clinical significance of PR3-ANCA in a large cohort of patients.A total of 244 PSC and 254 control [autoimmune hepatitis (AIH, primary biliary cirrhosis (PBC, hepatitis C viral infection (HCV, hepatitis B viral infection (HBV, and healthy controls] sera and their clinical correlations were retrospectively analyzed for PR3-ANCA determined by ELISA and a new chemiluminescence immunoassay (CIA. Testing was also performed for aANCA by IIF.When measured by CIA, PR3-ANCA was detected in 38.5% (94/244 of PSC patients compared to 10.6% (27/254 controls (p<0.0001. By ELISA, PR3-ANCA was detected in 23.4% (57/244 of PSC patients compared to 2.7% (6/254 controls (p<0.0001. PR3-ANCA in PSC patients was not associated with the presence or type of underlying IBD, and, in fact, it was more frequent in Crohn's disease (CD patients with PSC than previously reported in CD alone. PR3-ANCA in PSC measured by CIA correlated with higher liver enzymes.PR3-ANCA is detected in a significant proportion of PSC patients compared to other liver diseases including PBC and AIH. PR3-ANCA is associated with higher liver enzyme levels in PSC, and is not solely related to underlying IBD.

  7. Reliability of capacitors for DC-link applications - An overview

    DEFF Research Database (Denmark)

    Wang, Huai; Blaabjerg, Frede

    2013-01-01

    DC-link capacitors are an important part in the majority of power electronic converters which contribute to cost, size and failure rate on a considerable scale. From capacitor users' viewpoint, this paper presents a review on the improvement of reliability of DC-link in power electronic converters...... from two aspects: 1) reliability-oriented DC-link design solutions; 2) conditioning monitoring of DC-link capacitors during operation. Failure mechanisms, failure modes and lifetime models of capacitors suitable for the applications are also discussed as a basis to understand the physics......-of-failure. This review serves to provide a clear picture of the state-of-the-art research in this area and to identify the corresponding challenges and future research directions for capacitors and their DC-link applications....

  8. Evaluation of Commercial Automotive-Grade BME Capacitors

    Science.gov (United States)

    Liu, Donhang

    2014-01-01

    Three Ni-BaTiO3 ceramic capacitor lots with the same specification (chip size, capacitance, and rated voltage) and the same reliability level, made by three different manufacturers, were degraded using highly accelerated life stress testing (HALST) with the same temperature and applied voltage conditions. The reliability, as characterized by mean time to failure (MTTF), differed by more than one order of magnitude among the capacitor lots. A theoretical model based on the existence of depletion layers at grain boundaries and the entrapment of oxygen vacancies has been proposed to explain the MTTF difference among these BME capacitors. It is the conclusion of this model that reliability will not be improved simply by increasing the insulation resistance of a BME capacitor. Indeed, Ni-BaTiO3 ceramic capacitors with a smaller degradation rate constant K will always give rise to a longer reliability life.

  9. Electric Field Simulation of Surge Capacitors with Typical Defects

    Science.gov (United States)

    Zhang, Chenmeng; Mao, Yuxiang; Xie, Shijun; Zhang, Yu

    2018-03-01

    The electric field of power capacitors with different typical defects in DC working condition and impulse oscillation working condition is studied in this paper. According to the type and location of defects and considering the influence of space charge, two-dimensional models of surge capacitors with different typical defects are simulated based on ANSYS. The distribution of the electric field inside the capacitor is analyzed, and the concentration of electric field and its influence on the insulation performance are obtained. The results show that the type of defects, the location of defects and the space charge all affect the electric field distribution inside the capacitor in varying degrees. Especially the electric field distortion in the local area such as sharp corners and burrs is relatively larger, which increases the probability of partial discharge inside the surge capacitor.

  10. Discontinuous Galerkin Time-Domain Analysis of Power-Ground Planes Taking Into Account Decoupling Capacitors

    KAUST Repository

    Li, Ping

    2017-03-22

    In this paper, a discontinuous Galerkin time-domain (DGTD) method is developed to analyze the power-ground planes taking into account the decoupling capacitors. In the presence of decoupling capacitors, the whole physical system can be split into two subsystems: 1) the field subsystem that is governed by Maxwell\\'s equations that will be solved by the DGTD method, and 2) the circuit subsystem including the capacitor and its parasitic inductor and resistor, which is going to be characterized by the modified nodal analysis algorithm constructed circuit equations. With the aim to couple the two subsystems together, a lumped port is defined over a coaxial surface between the via barrel and the ground plane. To reach the coupling from the field to the circuit subsystem, a lumped voltage source calculated by the integration of electric field along the radial direction is introduced. On the other hand, to facilitate the coupling from the circuit to field subsystem, a lumped port current source calculated from the circuit equation is introduced, which serves as an impressed current source for the field subsystem. With these two auxiliary terms, a hybrid field-circuit matrix equation is established, which enables the field and circuit subsystems are solved in a synchronous scheme. Furthermore, the arbitrarily shaped antipads are considered by enforcing the proper wave port excitation using the magnetic surface current source derived from the antipads supported electric eigenmodes. In this way, the S-parameters corresponding to different modes can be conveniently extracted. To further improve the efficiency of the proposed algorithm in handling multiscale meshes, the local time-stepping marching scheme is applied. The proposed algorithm is verified by several representative examples.

  11. Switched capacitor DC-DC converter with switch conductance modulation and Pesudo-fixed frequency control

    DEFF Research Database (Denmark)

    Larsen, Dennis Øland; Vinter, Martin; Jørgensen, Ivan Harald Holger

    A switched capacitor dc-dc converter with frequency-planned control is presented. By splitting the output stage switches in eight segments the output voltage can be regulated with a combination of switching frequency and switch conductance. This allows for switching at predetermined frequencies, 31.......25 kHz, 250 kHz, 500 kHz, and 1 MHz, while maintaining regulation of the output voltage. The controller is implemented in 180 CMOS with a 1/3 series-parallel output stage designed for 3.6–4.2 V input, 1.2 V output, and 1–40 mA load current. The proposed controller is compared with a co-integrated pulse...

  12. Enhancement of switching speed of BiFeO3 capacitors by magnetic fields

    Directory of Open Access Journals (Sweden)

    E. J. Guo

    2014-09-01

    Full Text Available The effect of a magnetic field on the ferroelectric switching kinetics of BiFeO3 (BFO capacitors with La0.8Ca0.2MnO3 (LCMO bottom electrode and Pt top contact has been investigated. We find a strong dependence of the remnant polarization and coercive field on the magnetic field. The switching time can be systematically tuned by magnetic field and reaches a tenfold reduction around the Curie temperature of LCMO at 4 T. We attribute this behavior to the splitting of the voltage drops across the BFO film and the LCMO bottom electrode, which can be strongly influenced by an external magnetic field due to the magnetoresistance. Further experiments on the BFO capacitors with SrRuO3 bottom electrodes show little magnetic field dependence of ferroelectric switching confirming our interpretation. Our results provide an efficient route to control the ferroelectric switching speed through the magnetic field, implying potential application in multifunctional devices.

  13. Global Locator, Local Locator, and Identifier Split (GLI-Split

    Directory of Open Access Journals (Sweden)

    Michael Menth

    2013-03-01

    Full Text Available The locator/identifier split is an approach for a new addressing and routing architecture to make routing in the core of the Internet more scalable. Based on this principle, we developed the GLI-Split framework, which separates the functionality of current IP addresses into a stable identifier and two independent locators, one for routing in the Internet core and one for edge networks. This makes routing in the Internet more stable and provides more flexibility for edge networks. GLI-Split can be incrementally deployed and it is backward-compatible with the IPv6 Internet. We describe its architecture, compare it to other approaches, present its benefits, and finally present a proof-of-concept implementation of GLI-Split.

  14. Split-illumination electron holography

    International Nuclear Information System (INIS)

    Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon; Inada, Yoshikatsu; Matsuda, Tsuyoshi; Taniyama, Akira; Shindo, Daisuke; Tonomura, Akira

    2012-01-01

    We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.

  15. Engineering-derived approaches for iPSC preparation, expansion, differentiation and applications.

    Science.gov (United States)

    Li, Yang; Li, Ling; Chen, Zhi-Nan; Gao, Ge; Yao, Rui; Sun, Wei

    2017-07-31

    Remarkable achievements have been made since induced pluripotent stem cells (iPSCs) were first introduced in 2006. Compared with non-pluripotent stem cells, iPSC research faces several additional complexities, such as the choice of extracellular matrix proteins, growth and differentiation factors, as well as technical challenges related to self-renewal and directed differentiation. Overcoming these challenges requires the integration of knowledge and technologies from multiple fields including cell biology, biomaterial science, engineering, physics and medicine. Here, engineering-derived iPSC approaches are reviewed according to three aspects of iPSC studies: preparation, expansion, differentiation and applications. Engineering strategies, such as 3D systems establishment, cell-matrix mechanics and the regulation of biophysical and biochemical cues, together with engineering techniques, such as 3D scaffolds, cell microspheres and bioreactors, have been applied to iPSC studies and have generated insightful results and even mini-organs such as retinas, livers and intestines. Specific results are given to demonstrate how these approaches impact iPSC behavior, and related mechanisms are discussed. In addition, cell printing technologies are presented as an advanced engineering-derived approach since they have been applied in both iPSC studies and the construction of diverse tissues and organs. Further development and possible innovations of cell printing technologies are presented in terms of creating complex and functional iPSC-derived living tissues and organs.

  16. Neonatal Transplantation Confers Maturation of PSC-Derived Cardiomyocytes Conducive to Modeling Cardiomyopathy

    Directory of Open Access Journals (Sweden)

    Gun-Sik Cho

    2017-01-01

    Full Text Available Pluripotent stem cells (PSCs offer unprecedented opportunities for disease modeling and personalized medicine. However, PSC-derived cells exhibit fetal-like characteristics and remain immature in a dish. This has emerged as a major obstacle for their application for late-onset diseases. We previously showed that there is a neonatal arrest of long-term cultured PSC-derived cardiomyocytes (PSC-CMs. Here, we demonstrate that PSC-CMs mature into adult CMs when transplanted into neonatal hearts. PSC-CMs became similar to adult CMs in morphology, structure, and function within a month of transplantation into rats. The similarity was further supported by single-cell RNA-sequencing analysis. Moreover, this in vivo maturation allowed patient-derived PSC-CMs to reveal the disease phenotype of arrhythmogenic right ventricular cardiomyopathy, which manifests predominantly in adults. This study lays a foundation for understanding human CM maturation and pathogenesis and can be instrumental in PSC-based modeling of adult heart diseases.

  17. Multifaceted mechanisms of HIV inhibition and resistance to CCR5 inhibitors PSC-RANTES and Maraviroc.

    Science.gov (United States)

    Lobritz, Michael A; Ratcliff, Annette N; Marozsan, Andre J; Dudley, Dawn M; Tilton, John C; Arts, Eric J

    2013-06-01

    Small-molecule CCR5 antagonists, such as maraviroc (MVC), likely block HIV-1 through an allosteric, noncompetitive inhibition mechanism, whereas inhibition by agonists such as PSC-RANTES is less defined and may involve receptor removal by cell surface downregulation, competitive inhibition by occluding the HIV-1 envelope binding, and/or allosteric effects by altering CCR5 conformation. We explored the inhibitory mechanisms of maraviroc and PSC-RANTES by employing pairs of virus clones with differential sensitivities to these inhibitors. Intrinsic PSC-RANTES-resistant virus (YA versus RT) or those selected in PSC-RANTES treated macaques (M584 versus P3-4) only displayed resistance in multiple-cycle assays or with a CCR5 mutant that cannot be downregulated. In single-cycle assays, these HIV-1 clones displayed equal sensitivity to PSC-RANTES inhibition, suggesting effective receptor downregulation. Prolonged PSC-RANTES exposure resulted in desensitization of the receptor to internalization such that increasing virus concentration (substrate) could saturate the receptors and overcome PSC-RANTES inhibition. In contrast, resistance to MVC was observed with the MVC-resistant HIV-1 (R3 versus S2) in both multiple- and single-cycle assays and with altered virus concentrations, which is indicative of allosteric inhibition. MVC could also mediate inhibition and possibly resistance through competitive mechanisms.

  18. ISR split-field magnet

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The experimental apparatus used at intersection 4 around the Split-Field Magnet by the CERN-Bologna Collaboration (experiment R406). The plastic scintillator telescopes are used for precise pulse-height and time-of-flight measurements.

  19. Development of Embedded EM Sensors for Estimating Tensile Forces of PSC Girder Bridges.

    Science.gov (United States)

    Kim, Junkyeong; Kim, Ju-Won; Lee, Chaggil; Park, Seunghee

    2017-08-30

    The tensile force of pre-stressed concrete (PSC) girders is the most important factor for managing the stability of PSC bridges. The tensile force is induced using pre-stressing (PS) tendons of a PSC girder. Because the PS tendons are located inside of the PSC girder, the tensile force cannot be measured after construction using conventional NDT (non-destructive testing) methods. To monitor the induced tensile force of a PSC girder, an embedded EM (elasto-magnetic) sensor was proposed in this study. The PS tendons are made of carbon steel, a ferromagnetic material. The magnetic properties of the ferromagnetic specimen are changed according to the induced magnetic field, temperature, and induced stress. Thus, the tensile force of PS tendons can be estimated by measuring their magnetic properties. The EM sensor can measure the magnetic properties of ferromagnetic materials in the form of a B (magnetic density)-H (magnetic force) loop. To measure the B-H loop of a PS tendon in a PSC girder, the EM sensor should be embedded into the PSC girder. The proposed embedded EM sensor can be embedded into a PSC girder as a sheath joint by designing screw threads to connect with the sheath. To confirm the proposed embedded EM sensors, the experimental study was performed using a down-scaled PSC girder model. Two specimens were constructed with embedded EM sensors, and three sensors were installed in each specimen. The embedded EM sensor could measure the B-H loop of PS tendons even if it was located inside concrete, and the area of the B-H loop was proportionally decreased according to the increase in tensile force. According to the results, the proposed method can be used to estimate the tensile force of unrevealed PS tendons.

  20. Development of Embedded EM Sensors for Estimating Tensile Forces of PSC Girder Bridges

    Science.gov (United States)

    Kim, Ju-Won; Lee, Chaggil; Park, Seunghee

    2017-01-01

    The tensile force of pre-stressed concrete (PSC) girders is the most important factor for managing the stability of PSC bridges. The tensile force is induced using pre-stressing (PS) tendons of a PSC girder. Because the PS tendons are located inside of the PSC girder, the tensile force cannot be measured after construction using conventional NDT (non-destructive testing) methods. To monitor the induced tensile force of a PSC girder, an embedded EM (elasto-magnetic) sensor was proposed in this study. The PS tendons are made of carbon steel, a ferromagnetic material. The magnetic properties of the ferromagnetic specimen are changed according to the induced magnetic field, temperature, and induced stress. Thus, the tensile force of PS tendons can be estimated by measuring their magnetic properties. The EM sensor can measure the magnetic properties of ferromagnetic materials in the form of a B (magnetic density)-H (magnetic force) loop. To measure the B-H loop of a PS tendon in a PSC girder, the EM sensor should be embedded into the PSC girder. The proposed embedded EM sensor can be embedded into a PSC girder as a sheath joint by designing screw threads to connect with the sheath. To confirm the proposed embedded EM sensors, the experimental study was performed using a down-scaled PSC girder model. Two specimens were constructed with embedded EM sensors, and three sensors were installed in each specimen. The embedded EM sensor could measure the B-H loop of PS tendons even if it was located inside concrete, and the area of the B-H loop was proportionally decreased according to the increase in tensile force. According to the results, the proposed method can be used to estimate the tensile force of unrevealed PS tendons. PMID:28867790

  1. Breakdown properties of irradiated MOS capacitors

    International Nuclear Information System (INIS)

    Paccagnella, A.; Candelori, A.; Pellizzer, F.; Fuochi, P.G.; Lavale, M.

    1996-01-01

    The authors have studied the effects of ionizing and non-ionizing radiation on the breakdown properties of different types of MOS capacitors, with thick (200 nm) and thin (down to 8 nm) oxides. In general, no large variations of the average breakdown field, time-to-breakdown at constant voltage, or charge-to-breakdown at constant voltage, or charge-to-breakdown values have been observed after high dose irradiation (20 Mrad(Si) 9 MeV electrons on thin and thick oxides, 17(Si) Mrad Co 60 gamma and 10 14 neutrons/cm 2 only on thick oxides). However, some modifications of the cumulative failure distributions have been observed in few of the oxides tested

  2. Carbon Film Electrodes For Super Capacitor Applications

    Science.gov (United States)

    Tan, Ming X.

    1999-07-20

    A method for treating an organic polymer material, preferably a vinylidene chloride/vinyl chloride copolymer (Saran) to produce a flat sheet of carbon film material having a high surface area (.apprxeq.1000 m.sup.2 /g) suitable as an electrode material for super capacitor applications. The method comprises heating a vinylidene chloride/vinyl chloride copolymer film disposed between two spaced apart graphite or ceramic plates to a first temperature of about 160.degree. C. for about 14 hours to form a stabilized vinylidene chloride/vinyl chloride polymer film, thereafter heating the stabilized film to a second temperature of about 750.degree. C. in an inert atmosphere for about one hour to form a carbon film; and finally activating the carbon film to increase the surface area by heating the carbon film in an oxidizing atmosphere to a temperature of at least 750-850.degree. C. for between 1-6 hours.

  3. Design definition of a mechanical capacitor

    Science.gov (United States)

    Michaelis, T. D.; Schlieban, E. W.; Scott, R. D.

    1977-01-01

    A design study and analyses of a 10 kW-hr, 15 kW mechanical capacitor system was studied. It was determined that magnetically supported wheels constructed of advanced composites have the potential for high energy density and high power density. Structural concepts are analyzed that yield the highest energy density of any structural design yet reported. Particular attention was paid to the problem of 'friction' caused by magnetic and I to the second power R losses in the suspension and motor-generator subsystems, and low design friction levels have been achieved. The potentially long shelf life of this system, and the absence of wearing parts, provide superior performance over conventional flywheels supported with mechanical bearings. Costs and economies of energy storage wheels were reviewed briefly.

  4. Chemical sensitivity of Mo gate Mos capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Lombardi, R.M.; Aragon, R. [Laboratorio de Peliculas delgadas, Facultad de Ingenieria, Paseo Colon 850, 1063, Buenos Aires (Argentina)

    2006-07-01

    Mo gate Mos capacitors exhibit a negative shift of their C-V characteristic by up to 240 mV, at 125 C, in response to 1000 ppm hydrogen, in controlled nitrogen atmospheres. The experimental methods for obtaining capacitance and conductance, as a function of polarisation voltage, as well as the relevant equivalent circuits are reviewed. The single-state interface state density, at the semiconductor-dielectric interface, decreases from 2.66 x 10{sup 11} cm{sup -2} e-v{sup -1}, in pure nitrogen, to 2.5 x 10{sup 11} cm{sup -2} e-v{sup -1} in 1000 ppm hydrogen in nitrogen mixtures, at this temperature. (Author)

  5. Capacitor with a composite carbon foam electrode

    Science.gov (United States)

    Mayer, Steven T.; Pekala, Richard W.; Kaschmitter, James L.

    1999-01-01

    Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid partides being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy.

  6. Voltage Balancer for Electric Double Layer Capacitors

    Science.gov (United States)

    Mori, Kazuya; Takahashi, Shingo; Hasebe, Akio; Seki, Sumiko; Itoh, Takahiko

    Decrease in energy density of the storage system with several electric double layer capacitors (EDLCs) is caused by imbalance of voltage for each EDLC. In case of low power applications, conventional voltage balancer with constant voltage circuits is useful. However, it has some problems for high power applications such as electric vehicle. We have developed a new system to balance the voltage of EDLCs by removing a little energy. In any case, the system can store the energy in each EDLC equally. In the present research, a prototype of voltage balancer is produced for making use of a number of EDLCs and evaluated. The results confirm that the system is effective and suitable for high power applications.

  7. Development of High Temperature Capacitor Technology and Manufacturing Capability

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2011-05-15

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250°C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: - Deeper oil exploration in higher temperature and pressure environments - Enabling power electronic and control equipment to operate in higher temperature environments - Enabling reduced cooling requirements of electronics - Increasing reliability and life of capacitors operating below rated temperature - Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: - FPE Film is difficult to handle and wind, resulting in poor yields - Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) - Encapsulation technologies must be improved to enable higher perature operation - Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/μm. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200°C and non-hermetic packages at 250°C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  8. Analysis of prion strains by PrPSc profiling in sporadic Creutzfeldt-Jakob disease.

    Directory of Open Access Journals (Sweden)

    Gaby Schoch

    2006-02-01

    Full Text Available BACKGROUND: Prion diseases are a group of invariably fatal neurodegenerative disorders affecting humans and a wide range of mammals. An essential part of the infectious agent, termed the prion, is composed of an abnormal isoform (PrPSc of a host-encoded normal cellular protein (PrPC. The conversion of PrPC to PrPSc is thought to play a crucial role in the development of prion diseases and leads to PrPSc deposition, mainly in the central nervous system. Sporadic Creutzfeldt-Jakob disease (sCJD, the most common form of human prion disease, presents with a marked clinical heterogeneity. This diversity is accompanied by a molecular signature which can be defined by histological, biochemical, and genetic means. The molecular classification of sCJD is an important tool to aid in the understanding of underlying disease mechanisms and the development of therapy protocols. Comparability of classifications is hampered by disparity of applied methods and inter-observer variability. METHODS AND FINDINGS: To overcome these difficulties, we developed a new quantification protocol for PrPSc by using internal standards on each Western blot, which allows for generation and direct comparison of individual PrPSc profiles. By studying PrPSc profiles and PrPSc type expression within nine defined central nervous system areas of 50 patients with sCJD, we were able to show distinct PrPSc distribution patterns in diverse subtypes of sCJD. Furthermore, we were able to demonstrate the co-existence of more than one PrPSc type in individuals with sCJD in about 20% of all patients and in more than 50% of patients heterozygous for a polymorphism on codon 129 of the gene encoding the prion protein (PRNP. CONCLUSION: PrPSc profiling represents a valuable tool for the molecular classification of human prion diseases and has important implications for their diagnosis by brain biopsy. Our results show that the co-existence of more than one PrPSc type might be influenced by genetic

  9. Analysis of prion strains by PrPSc profiling in sporadic Creutzfeldt-Jakob disease.

    Science.gov (United States)

    Schoch, Gaby; Seeger, Harald; Bogousslavsky, Julien; Tolnay, Markus; Janzer, Robert Charles; Aguzzi, Adriano; Glatzel, Markus

    2006-02-01

    Prion diseases are a group of invariably fatal neurodegenerative disorders affecting humans and a wide range of mammals. An essential part of the infectious agent, termed the prion, is composed of an abnormal isoform (PrPSc) of a host-encoded normal cellular protein (PrPC). The conversion of PrPC to PrPSc is thought to play a crucial role in the development of prion diseases and leads to PrPSc deposition, mainly in the central nervous system. Sporadic Creutzfeldt-Jakob disease (sCJD), the most common form of human prion disease, presents with a marked clinical heterogeneity. This diversity is accompanied by a molecular signature which can be defined by histological, biochemical, and genetic means. The molecular classification of sCJD is an important tool to aid in the understanding of underlying disease mechanisms and the development of therapy protocols. Comparability of classifications is hampered by disparity of applied methods and inter-observer variability. To overcome these difficulties, we developed a new quantification protocol for PrPSc by using internal standards on each Western blot, which allows for generation and direct comparison of individual PrPSc profiles. By studying PrPSc profiles and PrPSc type expression within nine defined central nervous system areas of 50 patients with sCJD, we were able to show distinct PrPSc distribution patterns in diverse subtypes of sCJD. Furthermore, we were able to demonstrate the co-existence of more than one PrPSc type in individuals with sCJD in about 20% of all patients and in more than 50% of patients heterozygous for a polymorphism on codon 129 of the gene encoding the prion protein (PRNP). PrPSc profiling represents a valuable tool for the molecular classification of human prion diseases and has important implications for their diagnosis by brain biopsy. Our results show that the co-existence of more than one PrPSc type might be influenced by genetic and brain region-specific determinants. These findings

  10. Floating body cell a novel capacitor-less DRAM cell

    CERN Document Server

    Ohsawa, Takashi

    2011-01-01

    DRAM together with NAND Flash is driving semiconductor technologies with wide spectrum of usage ranging from PC, mobile phone and digital home appliances to solid-state disk (SSD). However, the DRAM cell which consists of a data storage capacitor (1C) and a switching transistor (1T) is facing serious difficulty in shrinking the size of the capacitor whose capacitance needs to be kept almost constant (20~30fF) throughout generations. The availability of a new DRAM cell which does not rely on an explicit capacitor for storing its data is more than ever awaited for further increasing the bit dens

  11. Comb-Line Filter with Coupling Capacitor in Ground Plane

    Directory of Open Access Journals (Sweden)

    Toshiaki Kitamura

    2011-01-01

    Full Text Available A comb-line filter with a coupling capacitor in the ground plane is proposed. The filter consists of two quarter-wavelength microstrip resonators. A coupling capacitor is inserted into the ground plane in order to build strong coupling locally along the resonators. The filtering characteristics are investigated through numerical simulations as well as experiments. Filtering characteristics that have attenuation poles at both sides of the passband are obtained. The input susceptances of even and odd modes and coupling coefficients are discussed. The filters using stepped impedance resonators (SIRs are also discussed, and the effects of the coupling capacitor for an SIR structure are shown.

  12. A light-powered bio-capacitor with nanochannel modulation.

    Science.gov (United States)

    Rao, Siyuan; Lu, Shanfu; Guo, Zhibin; Li, Yuan; Chen, Deliang; Xiang, Yan

    2014-09-03

    An artificial bio-capacitor system is established, consisting of the proton-pump protein proteorhodopsin and a modified alumina nanochannel, inspired by the capacitor-like behavior of plasma membranes realized through the cooperation of ion-pump and ion-channel proteins. Capacitor-like features of this simplified system are realized and identified, and the photocurrent duration time can be modulated by nanochannel modification to obtain favorable square-wave currents. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Electrochemical capacitors based on nitrogen-enriched cobalt (II) phthalocyanine/multi-walled carbon nanotube nanocomposites

    CSIR Research Space (South Africa)

    Lekitima, JN

    2013-11-01

    Full Text Available shown to be desirable ESD as compared to batteries and conventional capacitors for application in high power demand technology. ECs have higher specific power than batteries and higher specific energy than conventional capacitors (1). ECs have... superior cycle life performance as compared to batteries and greater energy density than conventional capacitors (2). ECs which are commonly referred to as supercapacitors, double layer capacitors, supercapacitors or ultra capacitors store charge through...

  14. A Power-Efficient Wireless Capacitor Charging System Through an Inductive Link

    OpenAIRE

    Lee, Hyung-Min; Ghovanloo, Maysam

    2013-01-01

    A power-efficient wireless capacitor charging system for inductively powered applications has been presented. A bank of capacitors can be directly charged from an ac source by generating a current through a series charge injection capacitor and a capacitor charger circuit. The fixed charging current reduces energy loss in switches, while maximizing the charging efficiency. An adaptive capacitor tuner compensates for the resonant capacitance variations during charging to keep the amplitude of ...

  15. Fluorescent Immunoassay Development for PrPSc Detection and Antemortem Diagnosis of TSEs

    National Research Council Canada - National Science Library

    Carp, Richard I

    2005-01-01

    The overall goal of our study is to develop methods of high-sensitivity and high-specificity for the antemortem diagnosis of prion diseases by detecting PrPSc in biological fluids using fluorescent immunoassay...

  16. Electrochemical Capacitor Development for Pulsed Power Communications, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In this NASA Phase II SBIR Project, we will continue the development of graphitic nanosheets (GNS) for electrochemical capacitor (EC) electrode materials. In the...

  17. Li-Ion, Ultra-capacitor Based Hybrid Energy Module

    National Research Council Canada - National Science Library

    Daboussi, Zaher; Paryani, Anil; Khalil, Gus; Catherino, Henry; Gargies, Sonya

    2007-01-01

    Ultra-capacitors in multi kilo-farad ranges are now starting to be considered as alternatives or complimentary to batteries for products ranging from toys to hybrid vehicles as well as for space applications...

  18. Scaling issues in ferroelectric barium strontium titanate tunable planar capacitors.

    Science.gov (United States)

    Lam, Peter G; Haridasan, Vrinda; Feng, Zhiping; Steer, Michael B; Kingon, Angus I; Maria, Jon-Paul

    2012-02-01

    We report on the geometric limits associated with tunability of interdigitated capacitors, specifically regarding the impact of a parasitic non-tunable component that necessarily accompanies a ferroelectric surface capacitor, and can dominate the voltage-dependent response as capacitor dimensions are reduced to achieve the small capacitance values required for impedance matching in the X band. We present a case study of simple gap capacitors prepared and characterized as a function of gap width (i.e., the distance between electrodes) and gap length (i.e., the edge-to-edge gap distance). Our series of measurements reveals that for gap widths in the micrometer range, as gap lengths are reduced to meet sub-picofarad capacitance values, the non-tunable parasitic elements limit the effective tunability. These experimental measurements are supported by a companion set of microwave models that clarify the existence of parallel parasitic elements.

  19. Fringe Capacitance of a Parallel-Plate Capacitor.

    Science.gov (United States)

    Hale, D. P.

    1978-01-01

    Describes an experiment designed to measure the forces between charged parallel plates, and determines the relationship among the effective electrode area, the measured capacitance values, and the electrode spacing of a parallel plate capacitor. (GA)

  20. A 3-MJ capacitor bank for the SNL electroexplosive facility

    Science.gov (United States)

    Chare, E. C.; Dobbie, C. B.

    1983-05-01

    A 3-MJ capacitor bank was added to the Electroexplosive Facility for injecting the initial magnetic energy into large explosive generators. It consists of two 800-(SIGMA)F modules that are first charged to +60 kV and -60 kV, respectively, and then discharged in series by explosive detonator switches to provide 400 (SIGMA)F at 120 kV. The bank was designed to deliver priming currents up to 2 MA and to have an energy transfer efficiency of 0.7 to 0.84 for generator inductance of approximately 10 (SIGMA)H. Type 17/14 coaxial cable will be used to interconnect the capacitor modules, detonator switches, and load. All generators primed by this bank will be crowbarred at peak current to limit capacitor voltage reversal and extend the life of the capacitors. The major components of the system are described.

  1. Barium titanate nanocomposite capacitor FY09 year end report.

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, Tyler E.; DiAntonio, Christopher Brian; Yang, Pin; Chavez, Tom P.; Winter, Michael R.; Monson, Todd C.; Roesler, Alexander William; Fellows, Benjamin D.

    2009-11-01

    This late start RTBF project started the development of barium titanate (BTO)/glass nanocomposite capacitors for future and emerging energy storage applications. The long term goal of this work is to decrease the size, weight, and cost of ceramic capacitors while increasing their reliability. Ceramic-based nanocomposites have the potential to yield materials with enhanced permittivity, breakdown strength (BDS), and reduced strain, which can increase the energy density of capacitors and increase their shot life. Composites of BTO in glass will limit grain growth during device fabrication (preserving nanoparticle grain size and enhanced properties), resulting in devices with improved density, permittivity, BDS, and shot life. BTO will eliminate the issues associated with Pb toxicity and volatility as well as the variation in energy storage vs. temperature of PZT based devices. During the last six months of FY09 this work focused on developing syntheses for BTO nanoparticles and firing profiles for sintering BTO/glass composite capacitors.

  2. Optimal capacitor placement and sizing using combined fuzzy ...

    African Journals Online (AJOL)

    user

    , Hybrid Particle Swarm Optimization. 1. Introduction. Shunt capacitors are installed at suitable locations in large distribution system for the improvement of voltage profile and to reduce power losses in the distribution system. The studies have ...

  3. Compact 20-kiloampere pulse-forming-network capacitor bank

    Science.gov (United States)

    Posta, S. J.; Michels, C. J.

    1973-01-01

    Bank uses commercially available high-energy-density capacitors for energy storage and silicon-controlled rectifiers for switching. Low voltage design employing solid-state switching is utilized in lieu of conventional gas discharge switching.

  4. Prognostic Techniques for Capacitor Degradation and Health Monitoring

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper discusses our initial efforts in constructing physics of failure models for electrolytic capacitors subjected to electrical stressors in DC-DC power...

  5. Assessment of Strain-Specific PrPSc Elongation Rates Revealed a Transformation of PrPSc Properties during Protein Misfolding Cyclic Amplification

    Science.gov (United States)

    Gonzalez-Montalban, Nuria; Baskakov, Ilia V.

    2012-01-01

    Prion replication is believed to consist of two components, a growth or elongation of infectious isoform of the prion protein (PrPSc) particles and their fragmentation, a process that provides new replication centers. The current study introduced an experimental approach that employs Protein Misfolding Cyclic Amplification with beads (PMCAb) and relies on a series of kinetic experiments for assessing elongation rates of PrPSc particles. Four prion strains including two strains with short incubation times to disease (263K and Hyper) and two strains with very long incubation times (SSLOW and LOTSS) were tested. The elongation rate of brain-derived PrPSc was found to be strain-specific. Strains with short incubation times had higher rates than strains with long incubation times. Surprisingly, the strain-specific elongation rates increased substantially for all four strains after they were subjected to six rounds of serial PMCAb. In parallel to an increase in elongation rates, the percentages of diglycosylated PrP glycoforms increased in PMCAb-derived PrPSc comparing to those of brain-derived PrPSc. These results suggest that PMCAb selects the same molecular features regardless of strain initial characteristics and that convergent evolution of PrPSc properties occurred during in vitro amplification. These results are consistent with the hypothesis that each prion strain is comprised of a variety of conformers or ‘quasi-species’ and that change in the prion replication environment gives selective advantage to those conformers that replicate most effectively under specific environment. PMID:22815972

  6. Spheromak Buildup in SSPX using a Modular Capacitor Bank

    International Nuclear Information System (INIS)

    Wood, R D; McLean, H S; Hill, D N; Hooper, E B; Romero-Talamas, C A

    2006-01-01

    The Sustained Spheromak Physics Experiment (SSPX) [1] was designed to address both magnetic field generation and confinement. The SSPX produces 1.5-3.5msec, spheromak plasmas with a 0.33m major radius and a minor radius of ∼0.23m. DC coaxial helicity injection is used to build and sustain the spheromak plasma within the flux conserver. Optimal operation is obtained by flattening the profile of λ = μ 0 j/B, consistent with reducing the drive for tearing and other MHD modes, and matching of edge current and bias flux to minimize |(delta)B/B| rms . With these optimizations, spheromak plasmas with central T e >350eV and β e ∼ 5% with toroidal fields of 0.6T [3] have been obtained. If a favorable balance between current drive efficiency and energy confinement can be shown, the spheromak has the potential to yield an attractive magnetic fusion concept [4]. The original SSPX power system consists of two lumped-circuit capacitor banks with fixed circuit parameters. This power system is used to produce an initial fast formation current pulse (10kV, 0.5MJ formation bank), followed by a lower current, 3.5ms flattop sustainment pulse (5kV, 1.5MJ sustainment bank). Experimental results indicate that a variety of injected current pulses, such as a longer sustainment flattop [5], higher and longer fast formation [6], and multiple current pulses [7], might further our understanding of magnetic field generation. Although the formation bank can be split into two independent banks capable of producing other injected current waveforms, the variety of current waveforms produced by this power system is limited. Thus, to extend the operating range of the SSPX, a new pulsed-power system has been designed and partially constructed. In this paper, we discuss the design of the programmable bank and present first results from using the bank to increase the magnetic field in SSPX

  7. Methamphetamine increases Prion Protein and induces dopamine-dependent expression of protease resistant PrPsc.

    Science.gov (United States)

    Ferrucci, M; Ryskalin, L; Biagioni, F; Gambardella, S; Busceti, C L; Falleni, A; Lazzeri, G; Fornai, F

    2017-07-01

    The cellular prion protein (PrPc) is physiologically expressed within selective brain areas of mammals. Alterations in the secondary structure of this protein lead to scrapie-like prion protein (PrPsc), which precipitates in the cell. PrPsc has been detected in infectious, inherited or sporadic neurodegenerative disorders. Prion protein metabolism is dependent on autophagy and ubiquitin proteasome. Despite not being fully elucidated, the physiological role of prion protein relates to chaperones which rescue cells under stressful conditions.Methamphetamine (METH) is a widely abused drug which produces oxidative stress in various brain areas causing mitochondrial alterations and protein misfolding. These effects produce a compensatory increase of chaperones while clogging cell clearing pathways. In the present study, we explored whether METH administration modifies the amount of PrPc. Since high levels of PrPc when the clearing systems are clogged may lead to its misfolding into PrPsc, we further tested whether METH exposure triggers the appearance of PrPsc. We analysed the effects of METH and dopamine administration in PC12 and striatal cells by using SDS-PAGE Coomassie blue, immune- histochemistry and immune-gold electron microscopy. To analyze whether METH administration produces PrPsc aggregates we used antibodies directed against PrP following exposure to proteinase K or sarkosyl which digest folded PrPc but misfolded PrPsc. We fond that METH triggers PrPsc aggregates in DA-containing cells while METH is not effective in primary striatal neurons which do not produce DA. In the latter cells exogenous DA is needed to trigger PrPsc accumulation similarly to what happens in DA containing cells under the effects of METH. The present findings, while fostering novel molecular mechanisms involving prion proteins, indicate that, cell pathology similar to prion disorders can be mimicked via a DA-dependent mechanism by a drug of abuse.

  8. Ruthenium Oxide Electrochemical Super Capacitor Optimization for Pulse Power Applications

    Science.gov (United States)

    Merryman, Stephen A.; Chen, Zheng

    2000-01-01

    Electrical actuator systems are being pursued as alternatives to hydraulic systems to reduce maintenance time, weight and costs while increasing reliability. Additionally, safety and environmental hazards associated with the hydraulic fluids can be eliminated. For most actuation systems, the actuation process is typically pulsed with high peak power requirements but with relatively modest average power levels. The power-time requirements for electrical actuators are characteristic of pulsed power technologies where the source can be sized for the average power levels while providing the capability to achieve the peak requirements. Among the options for the power source are battery systems, capacitor systems or battery-capacitor hybrid systems. Battery technologies are energy dense but deficient in power density; capacitor technologies are power dense but limited by energy density. The battery-capacitor hybrid system uses the battery to supply the average power and the capacitor to meet the peak demands. It has been demonstrated in previous work that the hybrid electrical power source can potentially provide a weight savings of approximately 59% over a battery-only source. Electrochemical capacitors have many properties that make them well-suited for electrical actuator applications. They have the highest demonstrated energy density for capacitive storage (up to 100 J/g), have power densities much greater than most battery technologies (greater than 30kW/kg), are capable of greater than one million charge-discharge cycles, can be charged at extremely high rates, and have non-explosive failure modes. Thus, electrochemical capacitors exhibit a combination of desirable battery and capacitor characteristics.

  9. CAPMIX -Deploying Capacitors for Salt Gradient Power Extraction

    OpenAIRE

    Bijmans, M.F.M.; Burheim, O.S.; Bryjak, M.; Delgado, A.; Hack, P.; Mantegazza, F.; Tenisson, S.; Hamelers, H.V.M.

    2012-01-01

    The process of mixing sea and river water can be utilised as a power source. At present, three groups of technology are established for doing so; i) mechanical; Pressure Retarded Osmosis PRO, ii) electrochemical reactions; Reverse ElectroDialysis (RED) and Nano Battery Electrodes (NBE) and iii) ultra capacitors; Capacitive Double Layer Expansion (CDLE) and Capacitors charge by the Donnan Potentials (CDP). The chemical potential for salt gradient power systems is only limited by th...

  10. Physics Based Modeling and Prognostics of Electrolytic Capacitors

    Science.gov (United States)

    Kulkarni, Chetan; Ceyla, Jose R.; Biswas, Gautam; Goebel, Kai

    2012-01-01

    This paper proposes first principles based modeling and prognostics approach for electrolytic capacitors. Electrolytic capacitors have become critical components in electronics systems in aeronautics and other domains. Degradations and faults in DC-DC converter unit propagates to the GPS and navigation subsystems and affects the overall solution. Capacitors and MOSFETs are the two major components, which cause degradations and failures in DC-DC converters. This type of capacitors are known for its low reliability and frequent breakdown on critical systems like power supplies of avionics equipment and electrical drivers of electromechanical actuators of control surfaces. Some of the more prevalent fault effects, such as a ripple voltage surge at the power supply output can cause glitches in the GPS position and velocity output, and this, in turn, if not corrected will propagate and distort the navigation solution. In this work, we study the effects of accelerated aging due to thermal stress on different sets of capacitors under different conditions. Our focus is on deriving first principles degradation models for thermal stress conditions. Data collected from simultaneous experiments are used to validate the desired models. Our overall goal is to derive accurate models of capacitor degradation, and use them to predict performance changes in DC-DC converters.

  11. The flying-capacitor SEPIC converter with the balancing circuit

    Directory of Open Access Journals (Sweden)

    Kawa Adam

    2016-09-01

    Full Text Available The paper presents investigation results of the natural balancing phenomena in the flying-capacitor SEPIC converters. The SEPIC converters topologies can be reconfigured to the flying-capacitor topology. Owing to this modification the advantageous increase of frequency of the current in the chokes and the decrease of semiconductors voltages can be achieved which is shown in this paper. Similarly to other multilevel flying capacitor topologies the adequate voltage sharing of the flying capacitors is an important issue for safe operation of the converter. The paper focuses on the analysis of the flying capacitor voltages balancing in the converter by natural currents as well as by the application of the additional RLC balancing booster. The paper proves that the natural balancing can be achieved by the specific application of the balancing circuit in the flying-capacitor SEPIC topology and proves the specific differences in the balancing process by natural currents of converter and with the usage of the balancing circuit. An operation of the converter with the balancing circuit and the natural balancing ability is studied here.

  12. Splitting strings on integrable backgrounds

    International Nuclear Information System (INIS)

    Vicedo, Benoit

    2011-05-01

    We use integrability to construct the general classical splitting string solution on R x S 3 . Namely, given any incoming string solution satisfying a necessary self-intersection property at some given instant in time, we use the integrability of the worldsheet σ-model to construct the pair of outgoing strings resulting from a split. The solution for each outgoing string is expressed recursively through a sequence of dressing transformations, the parameters of which are determined by the solutions to Birkhoff factorization problems in an appropriate real form of the loop group of SL 2 (C). (orig.)

  13. Large heat flux in electrocaloric multilayer capacitors

    Science.gov (United States)

    Faye, Romain; Strozyk, Hervé; Dkhil, Brahim; Defay, Emmanuel

    2017-11-01

    Multi layer capacitors (MLCs) are considered the most promising refrigerant elements for the design and development of electrocaloric cooling devices. Recently, the heat transfer of these MLCs has been considered. However, the heat exchange with the surrounding environment has been poorly addressed. In this work, we measure by infrared thermography the temperature change versus time in four different heat exchange configurations. Depending on the configurations, Newtonian and non-Newtonian regimes with their corresponding Biot number are determined, providing useful thermal characteristics. Indeed, in the case of large area thermal pad contacts, heat transfer coefficients up to 3400 W · m‑2 · K‑1 were obtained, showing that the standard (non-optimised) MLCs already reach the needs for designing efficient prototypes. We also determined the ideal Brayton cooling power in case of thick wires contact that varied between 3.4 mW and 9.8 mW for operating frequencies varying from 0.25 Hz to 1 Hz. While only heat conduction was considered here, our work provides some design rules for improving heat exchanges in future devices.

  14. Split supersymmetry in brane models

    Indian Academy of Sciences (India)

    Type-I string theory in the presence of internal magnetic fields provides a concrete realization of split supersymmetry. To lowest order, gauginos are massless while squarks and sleptons are superheavy. For weak magnetic fields, the correct Standard Model spectrum guarantees gauge coupling unification with sin2 W ...

  15. VBSCan Split 2017 Workshop Summary

    Energy Technology Data Exchange (ETDEWEB)

    Anders, Christoph Falk; et al.

    2018-01-12

    This document summarises the talks and discussions happened during the VBSCan Split17 workshop, the first general meeting of the VBSCan COST Action network. This collaboration is aiming at a consistent and coordinated study of vector-boson scattering from the phenomenological and experimental point of view, for the best exploitation of the data that will be delivered by existing and future particle colliders.

  16. Split supersymmetry in brane models

    Indian Academy of Sciences (India)

    journal of. November 2006 physics pp. 793–802. Split supersymmetry in brane models. IGNATIOS ANTONIADIS∗. Department of Physics, CERN-Theory Division, 1211 Geneva 23, Switzerland. E-mail: Ignatios. ... that LEP data favor the unification of the three SM gauge couplings are smoking guns for the presence of new ...

  17. Water splitting by cooperative catalysis

    NARCIS (Netherlands)

    Hetterscheid, D.G.H.; van der Vlugt, J.I.; de Bruin, B.; Reek, J.N.H.

    2009-01-01

    A mononuclear Ru complex is shown to efficiently split water into H2 and O2 in consecutive steps through a heat- and light-driven process (see picture). Thermally driven H2 formation involves the aid of a non-innocent ligand scaffold, while dioxygen is generated by initial photochemically induced

  18. On split Lie triple systems

    Indian Academy of Sciences (India)

    Lie triple system; system of roots; root space; split Lie algebra; structure theory. 1. Introduction and previous definitions. Throughout this paper, Lie triple systems T are considered of arbitrary dimension and over an arbitrary field K. It is worth to mention that, unless otherwise stated, there is not any restriction on dim Tα or {k ...

  19. On split Lie triple systems

    Indian Academy of Sciences (India)

    The key tool in this job is the notion of connection of roots in the framework of split Lie triple systems. Author Affiliations. Antonio J Calderón Martín1. Departamento de Matemáticas, Universidad de Cádiz, 11510 Puerto Real, Cádiz, Spain. Dates. Manuscript received: 25 January 2008. Proceedings – Mathematical Sciences.

  20. BioCapacitor: A novel principle for biosensors.

    Science.gov (United States)

    Sode, Koji; Yamazaki, Tomohiko; Lee, Inyoung; Hanashi, Takuya; Tsugawa, Wakako

    2016-02-15

    Studies regarding biofuel cells utilizing biocatalysts such as enzymes and microorganisms as electrocatalysts have been vigorously conducted over the last two decades. Because of their environmental safety and sustainability, biofuel cells are expected to be used as clean power generators. Among several principles of biofuel cells, enzyme fuel cells have attracted significant attention for their use as alternative energy sources for future implantable devices, such as implantable insulin pumps and glucose sensors in artificial pancreas and pacemakers. However, the inherent issue of the biofuel cell principle is the low power of a single biofuel cell. The theoretical voltage of biofuel cells is limited by the redox potential of cofactors and/or mediators employed in the anode and cathode, which are inadequate for operating any devices used for biomedical application. These limitations inspired us to develop a novel biodevice based on an enzyme fuel cell that generates sufficient stable power to operate electric devices, designated "BioCapacitor." To increase voltage, the enzyme fuel cell is connected to a charge pump. To obtain a sufficient power and voltage to operate an electric device, a capacitor is used to store the potential generated by the charge pump. Using the combination of a charge pump and capacitor with an enzyme fuel cell, high voltages with sufficient temporary currents to operate an electric device were generated without changing the design and construction of the enzyme fuel cell. In this review, the BioCapacitor principle is described. The three different representative categories of biodevices employing the BioCapacitor principle are introduced. Further, the recent challenges in the developments of self-powered stand-alone biodevices employing enzyme fuel cells combined with charge pumps and capacitors are introduced. Finally, the future prospects of biodevices employing the BioCapacitor principle are addressed. Copyright © 2015 The Authors

  1. Inhibition of PrPSc formation by synthetic O-sulfated glycopyranosides and their polymers.

    Science.gov (United States)

    Yamaguchi, Satoko; Nishida, Yoshihiro; Sasaki, Kenji; Kambara, Mikie; Kim, Chan-Lan; Ishiguro, Naotaka; Nagatsuka, Takehiro; Uzawa, Hirotaka; Horiuchi, Motohiro

    2006-10-20

    Sulfated glycosaminoglycans (GAGs) and sulfated glycans inhibit formation of the abnormal isoform of prion protein (PrPSc) in prion-infected cells and prolong the incubation time of scrapie-infected animals. Sulfation of GAGs is not tightly regulated and possible sites of sulfation are randomly modified, which complicates elucidation of the fundamental structures of GAGs that mediate the inhibition of PrPSc formation. To address the structure-activity relationship of GAGs in the inhibition of PrPSc formation, we screened the ability of various regioselectively O-sulfated glycopyranosides to inhibit PrPSc formation in prion-infected cells. Among the glycopyranosides and their polymers examined, monomeric 4-sulfo-N-acetyl-glucosamine (4SGN), and two glycopolymers, poly-4SGN and poly-6-sulfo-N-acetyl-glucosamine (poly-6SGN), inhibited PrPSc formation with 50% effective doses below 20 microg/ml, and their inhibitory effect became more evident with consecutive treatments. Structural comparisons suggested that a combination of an N-acetyl group at C-2 and an O-sulfate group at either O-4 or O-6 on glucopyranoside might be involved in the inhibition of PrPSc formation. Furthermore, polymeric but not monomeric 6SGN inhibited PrPSc formation, suggesting the importance of a polyvalent configuration in its effect. These results indicate that the synthetic sulfated glycosides are useful not only for the analysis of structure-activity relationship of GAGs but also for the development of therapeutics for prion diseases.

  2. PrPSc spreading patterns in the brain of sheep linked to different prion types.

    Science.gov (United States)

    Wemheuer, Wiebke M; Benestad, Sylvie L; Wrede, Arne; Wemheuer, Wilhelm E; Brenig, Bertram; Bratberg, Bjørn; Schulz-Schaeffer, Walter J

    2011-02-15

    Scrapie in sheep and goats has been known for more than 250 years and belongs nowadays to the so-called prion diseases that also include e.g. bovine spongiform encephalopathy in cattle (BSE) and Creutzfeldt-Jakob disease in humans. According to the prion hypothesis, the pathological isoform (PrPSc) of the cellular prion protein (PrPc) comprises the essential, if not exclusive, component of the transmissible agent. Currently, two types of scrapie disease are known--classical and atypical/Nor98 scrapie. In the present study we examine 24 cases of classical and 25 cases of atypical/Nor98 scrapie with the sensitive PET blot method and validate the results with conventional immunohistochemistry. The sequential detection of PrPSc aggregates in the CNS of classical scrapie sheep implies that after neuroinvasion a spread from spinal cord and obex to the cerebellum, diencephalon and frontal cortex via the rostral brainstem takes place. We categorize the spread of PrPSc into four stages: the CNS entry stage, the brainstem stage, the cruciate sulcus stage and finally the basal ganglia stage. Such a sequential development of PrPSc was not detectable upon analysis of the present atypical/Nor98 scrapie cases. PrPSc distribution in one case of atypical/Nor98 scrapie in a presumably early disease phase suggests that the spread of PrPSc aggregates starts in the di- or telencephalon. In addition to the spontaneous generation of PrPSc, an uptake of the infectious agent into the brain, that bypasses the brainstem and starts its accumulation in the thalamus, needs to be taken into consideration for atypical/Nor98 scrapie.

  3. Immunolocalisation of PrPSc in scrapie-infected N2a mouse neuroblastoma cells by light and electron microscopy.

    Science.gov (United States)

    Veith, Nathalie M; Plattner, Helmut; Stuermer, Claudia A O; Schulz-Schaeffer, Walter J; Bürkle, Alexander

    2009-01-01

    The causative agent of transmissible spongiform encephalopathies (TSE) is PrPSc, an infectious, misfolded isoform of the cellular prion protein (PrPC). The localisation and trafficking of PrPSc and sites of conversion from PrPC to PrPSc are under debate, particularly since most published work did not discriminate between PrPC and PrPSc. Here we describe the localisation of PrPC and PrPSc in a scrapie-infected neuroblastoma cell line, ScN2a, by light and electron microscopic immunolocalisation. After eliminating PrPC with proteinase K, PrPSc was detected at the plasma membrane, endocytosed via clathrin-coated pits and delivered to early endosomes. Finally, PrPSc was detected in late endosomes/lysosomes. As we detected PrPSc at the cell surface, in early endosomes and in late endosomes/lysosomes, i.e. locations where PrPC is also present, our data imply that the conversion process could take place at the plasma membrane and/or along the endocytic pathway. Finally, we observed the release of PrPC/PrPSc via exocytotic pathways, i.e. via exosomes and as an opaque electron-dense mass which may represent a mechanism of intercellular spreading of infectious prions.

  4. Development of electrochemical super capacitors for EMA applications

    Science.gov (United States)

    Kosek, J. A.; Dunning, T.; Laconti, A. B.

    1995-01-01

    In a NASA SBIR Phase I program (Contract No. NAS8-40119), Giner, Inc. evaluated the feasibility of fabricating an all-solid-ionomer multicell electrochemical capacitor having a unit cell capacitance greater than 2 F/sq cm and a repeating element thickness of 6 mils. This capacitor can possibly be used by NASA as a high-rate energy source for electromechanical actuator (EMA) activation for advanced space missions. The high unit cell capacitance and low repeating element thickness will allow for the fabrication of a low-volume, low-weight device, favorable characteristics for space applications. These same characteristics also make the capacitor attractive for terrestrial applications, such as load-leveling batteries or fuel cells in electric vehicle applications. Although the projected energy densities for electrochemical capacitors are about two orders of magnitude lower than that of batteries, the high-power-density characteristics of these devices render them as potentially viable candidates for meeting pulse or peak electrical power requirements for some anticipated aerospace mission scenarios, especially those with discharge times on the millisecond to second time scale. On a volumetric or gravimetric basis, the advantages of utilizing electrochemical capacitors rather than batteries for meeting the peak power demands associated with a specific mission scenario will largely depend upon the total and pulse durations of the power peaks. The effect of preparation conditions on RuO(x), the active component in an all-solid-ionomer electrochemical capacitor, was evaluated during this program. Methods were identified to prepare RuO(x) having a surface areagreater than 180 sq m/g, and a capacitance of greater than 2 F/sq cm. Further efforts to reproducibly obtain these high-surface-area materials in scaled-up batches will be evaluated in Phase 2. During this Phase 1 program we identified a superior Nafion 105 membrane, having a film thickness of 5 mils, that showed

  5. Optimal capacitor placement and sizing in radial electric powe

    Directory of Open Access Journals (Sweden)

    Ahmed Elsheikh

    2014-12-01

    Full Text Available The use of capacitors in power systems has many well-known benefits that include improvement of the system power factor, improvement of the system voltage profile, increasing the maximum flow through cables and transformers and reduction of losses due to the compensation of the reactive component of power flow. By decreasing the flow through cables, the systems’ loads can be increased without adding any new cables or overloading the existing cables. These benefits depend greatly on how capacitors are placed in the system. In this paper, the problem of how to optimally determine the locations to install capacitors and the sizes of capacitors to be installed in the buses of radial distribution systems is addressed. The proposed methodology uses loss sensitivity factors to identify the buses requiring compensation and then a discrete particle swarm optimization algorithm (PSO is used to determine the sizes of the capacitors to be installed. The proposed algorithm deals directly with discrete nature of the design variables. The results obtained are superior to those reported in Prakash and Sydulu (2007.

  6. Performance and Reliability of Solid Tantalum Capacitors at Cryogenic Conditions

    Science.gov (United States)

    Teverovsky, Alexander

    2006-01-01

    Performance of different types of solid tantalum capacitors was evaluated at room and low temperatures, down to 15 K. The effect of temperature on frequency dependencies of capacitance, effective series resistances (ESR), leakage currents, and breakdown voltages has been investigated and analyzed. To assess thermo-mechanical robustness of the parts, several groups of loose capacitors and those soldered on FR4 boards were subjected to multiple (up to 500) temperature cycles between room temperature and 77 K. Experiments and mathematical modeling have shown that degradation in tantalum capacitors at low temperatures is mostly due to increasing resistance of the manganese cathode layer, resulting in substantial decrease of the roll-off frequency. Absorption currents follow a power law, I approximately t(sup -m), with the exponent m varying from 0.8 to 1.1. These currents do not change significantly at cryogenic conditions and the value of the exponent remains the same down to 15 K. Variations of leakage currents with voltage can be described by Pool-Frenkel and Schottky mechanisms of conductivity, with the Schottky mechanism prevailing at cryogenic conditions. Breakdown voltages of tantalum capacitors increase and the probability of scintillations decreases at cryogenic temperatures. However, breakdown voltages measured during surge current testing decrease at liquid nitrogen (LN) compared to room-temperature conditions. Results of temperature cycling suggest that tantalum capacitors are capable of withstanding multiple exposures to cryogenic conditions, but the probability of failures varies for different part types.

  7. The ISR Asymmetrical Capacitor Thruster: Experimental Results and Improved Designs

    Science.gov (United States)

    Canning, Francis X.; Cole, John; Campbell, Jonathan; Winet, Edwin

    2004-01-01

    A variety of Asymmetrical Capacitor Thrusters has been built and tested at the Institute for Scientific Research (ISR). The thrust produced for various voltages has been measured, along with the current flowing, both between the plates and to ground through the air (or other gas). VHF radiation due to Trichel pulses has been measured and correlated over short time scales to the current flowing through the capacitor. A series of designs were tested, which were increasingly efficient. Sharp features on the leading capacitor surface (e.g., a disk) were found to increase the thrust. Surprisingly, combining that with sharp wires on the trailing edge of the device produced the largest thrust. Tests were performed for both polarizations of the applied voltage, and for grounding one or the other capacitor plate. In general (but not always) it was found that the direction of the thrust depended on the asymmetry of the capacitor rather than on the polarization of the voltage. While no force was measured in a vacuum, some suggested design changes are given for operation in reduced pressures.

  8. Investigation of embedded perovskite nanoparticles for enhanced capacitor permittivities.

    Science.gov (United States)

    Krause, Andreas; Weber, Walter M; Pohl, Darius; Rellinghaus, Bernd; Verheijen, Marcel; Mikolajick, Thomas

    2014-11-26

    Growth experiments show significant differences in the crystallization of ultrathin CaTiO3 layers on polycrystalline Pt surfaces. While the deposition of ultrathin layers below crystallization temperature inhibits the full layer crystallization, local epitaxial growth of CaTiO3 crystals on top of specific oriented Pt crystals occurs. The result is a formation of crystals embedded in an amorphous matrix. An epitaxial alignment of the cubic CaTiO3 ⟨111⟩ direction on top of the underlying Pt {111} surface has been observed. A reduced forming energy is attributed to an interplay of surface energies at the {111} interface of both materials and CaTiO3 nanocrystallites facets. The preferential texturing of CaTiO3 layers on top of Pt has been used in the preparation of ultrathin metal-insulator-metal capacitors with 5-30 nm oxide thickness. The effective CaTiO3 permittivity in the capacitor stack increases to 55 compared to capacitors with amorphous layers and a permittivity of 28. The isolated CaTiO3 crystals exhibit a passivation of the CaTiO3 grain surfaces by the surrounding amorphous matrix, which keeps the capacitor leakage current at ideally low values comparable for those of amorphous thin film capacitors.

  9. Leakage Currents and Gas Generation in Advanced Wet Tantalum Capacitors

    Science.gov (United States)

    Teverovsky, Alexander

    2015-01-01

    Currently, military grade, established reliability wet tantalum capacitors are among the most reliable parts used for space applications. This has been achieved over the years by extensive testing and improvements in design and materials. However, a rapid insertion of new types of advanced, high volumetric efficiency capacitors in space systems without proper testing and analysis of degradation mechanisms might increase risks of failures. The specifics of leakage currents in wet electrolytic capacitors is that the conduction process is associated with electrolysis of electrolyte and gas generation resulting in building up of internal gas pressure in the parts. The risk associated with excessive leakage currents and increased pressure is greater for high value advanced wet tantalum capacitors, but it has not been properly evaluated yet. In this work, in Part I, leakages currents in various types of tantalum capacitors have been analyzed in a wide range of voltages, temperatures, and time under bias. Gas generation and the level of internal pressure have been calculated in Part II for different case sizes and different hermeticity leak rates to assess maximal allowable leakage currents. Effects related to electrolyte penetration to the glass seal area have been studied and the possibility of failures analyzed in Part III. Recommendations for screening and qualification to reduce risks of failures have been suggested.

  10. Study of electric capacitors using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Alina Neamț

    2012-12-01

    Full Text Available A capacitor is made of two armatures and a dielectric between the two armatures. In this paper, we are going to study the plane capacitor , which is made of two equal metal armatures, plane and parallel, having the S surface, situated at a distance d much shorter than the armatures dimensions, between which there is a liniar, homogenous and isotropic dielectric having a constant electrical permittivity.The purpose of studying the plane capacitor, through MEF, presented in this paper,is to establish the stress to which the dielectrics may be subject to, in daily practice, and the influence that their superposition in an electric field has, on each of them. The study of the plane capacitor , finalised with observations on the raise of the dependence of the electric field intensity in air on the size of the air layer and having as parameter the type of dielectric material introduced between the armatures, is an example of confirmation or invalidation of the possibility and utility of using layers of dielectrics between the armatures of the capacitors.

  11. Human iPSC for Therapeutic Approaches to the Nervous System: Present and Future Applications

    Directory of Open Access Journals (Sweden)

    Maria Giuseppina Cefalo

    2016-01-01

    Full Text Available Many central nervous system (CNS diseases including stroke, spinal cord injury (SCI, and brain tumors are a significant cause of worldwide morbidity/mortality and yet do not have satisfying treatments. Cell-based therapy to restore lost function or to carry new therapeutic genes is a promising new therapeutic approach, particularly after human iPSCs became available. However, efficient generation of footprint-free and xeno-free human iPSC is a prerequisite for their clinical use. In this paper, we will first summarize the current methodology to obtain footprint- and xeno-free human iPSC. We will then review the current iPSC applications in therapeutic approaches for CNS regeneration and their use as vectors to carry proapoptotic genes for brain tumors and review their applications for modelling of neurological diseases and formulating new therapeutic approaches. Available results will be summarized and compared. Finally, we will discuss current limitations precluding iPSC from being used on large scale for clinical applications and provide an overview of future areas of improvement. In conclusion, significant progress has occurred in deriving iPSC suitable for clinical use in the field of neurological diseases. Current efforts to overcome technical challenges, including reducing labour and cost, will hopefully expedite the integration of this technology in the clinical setting.

  12. Impact of Microbes on the Pathogenesis of Primary Biliary Cirrhosis (PBC and Primary Sclerosing Cholangitis (PSC

    Directory of Open Access Journals (Sweden)

    Jochen Mattner

    2016-11-01

    Full Text Available Primary biliary cirrhosis (PBC and primary sclerosing cholangitis (PSC represent the major clinical entities of chronic cholestatic liver diseases. Both disorders are characterized by portal inflammation and slowly progress to obliterative fibrosis and eventually liver cirrhosis. Although immune-pathogenic mechanisms have been implicated in the pathogenesis of PBC and PSC, neither disorder is considered to be a classical autoimmune disease, as PSC and PBC patients do not respond to immune-suppressants. Furthermore, the decreased bile flow resulting from the immune-mediated tissue assault and the subsequent accumulation of toxic bile products in PBC and PSC not only perpetuates biliary epithelial damage, but also alters the composition of the intestinal and biliary microbiota and its mutual interactions with the host. Consistent with the close association of PSC and inflammatory bowel disease (IBD, the polyclonal hyper IgM response in PBC and (auto-antibodies which cross-react to microbial antigens in both diseases, an expansion of individual microbes leads to shifts in the composition of the intestinal or biliary microbiota and a subsequent altered integrity of epithelial layers, promoting microbial translocation. These changes have been implicated in the pathogenesis of both devastating disorders. Thus, we will discuss here these recent findings in the context of novel and alternative therapeutic options.

  13. Stability of split Stirling refrigerators

    International Nuclear Information System (INIS)

    Waele, A T A M de; Liang, W

    2009-01-01

    In many thermal systems spontaneous mechanical oscillations are generated under the influence of large temperature gradients. Well-known examples are Taconis oscillations in liquid-helium cryostats and oscillations in thermoacoustic systems. In split Stirling refrigerators the compressor and the cold finger are connected by a flexible tube. The displacer in the cold head is suspended by a spring. Its motion is pneumatically driven by the pressure oscillations generated by the compressor. In this paper we give the basic dynamic equations of split Stirling refrigerators and investigate the possibility of spontaneous mechanical oscillations if a large temperature gradient develops in the cold finger, e.g. during or after cool down. These oscillations would be superimposed on the pressure oscillations of the compressor and could ruin the cooler performance.

  14. Effect of Mechanical Stresses on Characteristics of Chip Tantalum Capacitors

    Science.gov (United States)

    Teverovsky, Alexander A.

    2007-01-01

    The effect of compressive mechanical stresses on chip solid tantalum capacitors is investigated by monitoring characteristics of different part types under axial and hydrostatic stresses. Depending on part types, an exponential increase of leakage currents was observed when stresses exceeded 10 MPa to 40 MPa. For the first time, reversible variations of leakage currents (up to two orders of magnitude) with stress have been demonstrated. Mechanical stresses did not cause significant changes of AC characteristics of the capacitors, whereas breakdown voltages measured during the surge current testing decreased substantially indicating an increased probability of failures of stressed capacitors in low impedance applications. Variations of leakage currents are explained by a combination of two mechanisms: stress-induced scintillations and stress-induced generation of electron traps in the tantalum pentoxide dielectric.

  15. Gamma radiation in ceramic capacitors: a study for space missions

    Science.gov (United States)

    dos Santos Ferreira, Eduardo; Sarango Souza, Juliana

    2017-10-01

    We studied the real time effects of the gamma radiation in ceramic capacitors, in order to evaluate the effects of cosmic radiation on these devices. Space missions have electronic circuits with various types of devices, many studies have been done on semiconductor devices exposed to gamma radiation, but almost no studies for passive components, in particular ceramic capacitors. Commercially sold ceramic capacitors were exposed to gamma radiation, and the capacitance was measured before and after exposure. The results clearly show that the capacitance decreases with exposure to gamma radiation. We confirmed this observation in a real time capacitance measurement, obtained using a data logging system developed by us using the open source Arduino platform.

  16. Low Temperature Characterization of Ceramic and Film Power Capacitors

    Science.gov (United States)

    Hammoud, Ahmad; Overton, Eric

    1996-01-01

    Among the key requirements for advanced electronic systems is the ability to withstand harsh environments while maintaining reliable and efficient operation. Exposures to low temperature as well as high temperature constitute such stresses. Applications where low temperatures are encountered include deep space missions, medical imaging equipment, and cryogenic instrumentation. Efforts were taken to design and develop power capacitors capable of wide temperature operation. In this work, ceramic and film power capacitors were developed and characterized as a function of temperature from 20 C to -185 C in terms of their dielectric properties. These properties included capacitance stability and dielectric loss in the frequency range of 50 Hz to 100 kHz. DC leakage current measurements were also performed on the capacitors. The manuscript presents the results that indicate good operational characteristic behavior and stability of the components tested at low temperatures.

  17. Characterization system for research on energy storage capacitors.

    Science.gov (United States)

    Noriega, J R; Iyore, O D; Budime, C; Gnade, B; Vasselli, J

    2013-05-01

    In this work a characterization system for high energy-density capacitors is described and demonstrated. Capacitors are being designed using thin-film technology in an attempt to achieve higher energy-density levels by operating the devices at a high voltage. These devices are fabricated from layers of 100 nm aluminum and a layer of polyvinylidene fluoride-hexafluoropropylene on a polyethylene naphthalate plastic substrate. The devices have been designed to store electrical charge at up to 200 V. Characterizations of these devices focus on the measurement of capacitance vs bias voltage and temperature, equivalent series resistance, and charge/discharge cycles. For the purpose of the characterization of these capacitors, an electronic charge/discharge interface was designed and tested.

  18. High performance capacitors using nano-structure multilayer materials fabrication

    Science.gov (United States)

    Barbee, Jr., Troy W.; Johnson, Gary W.; O'Brien, Dennis W.

    1995-01-01

    A high performance capacitor fabricated from nano-structure multilayer materials, such as by controlled, reactive sputtering, and having very high energy-density, high specific energy and high voltage breakdown. The multilayer capacitors, for example, may be fabricated in a "notepad" configuration composed of 200-300 alternating layers of conductive and dielectric materials so as to have a thickness of 1 mm, width of 200 mm, and length of 300 mm, with terminals at each end of the layers suitable for brazing, thereby guaranteeing low contact resistance and high durability. The "notepad" capacitors may be stacked in single or multiple rows (series-parallel banks) to increase the voltage and energy density.

  19. Optimizing Transient Behavior of Wind Farm Equipped by Switching Capacitors

    Science.gov (United States)

    Tarafdar hagh, M.; Roshan Milani, A.; Lafzi, A.

    2009-08-01

    In recent years, induction generators used in wind farms have found a great importance. Self exciting induction generators main problem is its requirement to a reactive power in order to generate output voltage. In order to provide the mentioned reactive power, using fixed capacitors connected to generator terminals is one of the usual methods. Using variable and switchable capacitor banks is one of the methods to generate reactive power for induction generators and to keep voltage stability since induction generators requirement to reactive power varies by load changes and wind speed. In this paper transient condition accrue by capacitor banks switching in wind farm are simulated by MATLAB and methods are suggested to optimize mentioned conditions.

  20. Time-resolved energy transduction in a quantum capacitor.

    Science.gov (United States)

    Jung, Woojin; Cho, Doohee; Kim, Min-Kook; Choi, Hyoung Joon; Lyo, In-Whan

    2011-08-23

    The capability to deposit charge and energy quantum-by-quantum into a specific atomic site could lead to many previously unidentified applications. Here we report on the quantum capacitor formed by a strongly localized field possessing such capability. We investigated the charging dynamics of such a capacitor by using the unique scanning tunneling microscopy that combines nanosecond temporal and subangstrom spatial resolutions, and by using Si(001) as the electrode as well as the detector for excitations produced by the charging transitions. We show that sudden switching of a localized field induces a transiently empty quantum dot at the surface and that the dot acts as a tunable excitation source with subangstrom site selectivity. The timescale in the deexcitation of the dot suggests the formation of long-lived, excited states. Our study illustrates that a quantum capacitor has serious implications not only for the bottom-up nanotechnology but also for future switching devices.

  1. PLZT capacitor and method to increase the dielectric constant

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Ralph S.; Fairchild, Manuel Ray; Balachjandran, Uthamalingam; Lee, Tae H.

    2017-12-12

    A ceramic-capacitor includes a first electrically-conductive-layer, a second electrically-conductive-layer arranged proximate to the first electrically-conductive-layer, and a dielectric-layer interposed between the first electrically-conductive-layer and the second electrically-conductive-layer. The dielectric-layer is formed of a lead-lanthanum-zirconium-titanate material (PLZT), wherein the PLZT is characterized by a dielectric-constant greater than 125, when measured at 25 degrees Celsius and zero Volts bias, and an excitation frequency of ten-thousand Hertz (10 kHz). A method for increasing a dielectric constant of the lead-lanthanum-zirconium-titanate material (PLZT) includes the steps of depositing PLZT to form a dielectric-layer of a ceramic-capacitor, and heating the ceramic-capacitor to a temperature not greater than 300.degree. C.

  2. Characterization system for research on energy storage capacitors

    Science.gov (United States)

    Noriega, J. R.; Iyore, O. D.; Budime, C.; Gnade, B.; Vasselli, J.

    2013-05-01

    In this work a characterization system for high energy-density capacitors is described and demonstrated. Capacitors are being designed using thin-film technology in an attempt to achieve higher energy-density levels by operating the devices at a high voltage. These devices are fabricated from layers of 100 nm aluminum and a layer of polyvinylidene fluoride-hexafluoropropylene on a polyethylene naphthalate plastic substrate. The devices have been designed to store electrical charge at up to 200 V. Characterizations of these devices focus on the measurement of capacitance vs bias voltage and temperature, equivalent series resistance, and charge/discharge cycles. For the purpose of the characterization of these capacitors, an electronic charge/discharge interface was designed and tested.

  3. Geometrical Applications of Split Octonions

    Directory of Open Access Journals (Sweden)

    Merab Gogberashvili

    2015-01-01

    Full Text Available It is shown that physical signals and space-time intervals modeled on split-octonion geometry naturally exhibit properties from conventional (3 + 1-theory (e.g., number of dimensions, existence of maximal velocities, Heisenberg uncertainty, and particle generations. This paper demonstrates these properties using an explicit representation of the automorphisms on split-octonions, the noncompact form of the exceptional Lie group G2. This group generates specific rotations of (3 + 4-vector parts of split octonions with three extra time-like coordinates and in infinitesimal limit imitates standard Poincare transformations. In this picture translations are represented by noncompact Lorentz-type rotations towards the extra time-like coordinates. It is shown how the G2 algebra’s chirality yields an intrinsic left-right asymmetry of a certain 3-vector (spin, as well as a parity violating effect on light emitted by a moving quantum system. Elementary particles are connected with the special elements of the algebra which nullify octonionic intervals. Then the zero-norm conditions lead to free particle Lagrangians, which allow virtual trajectories also and exhibit the appearance of spatial horizons governing by mass parameters.

  4. 7 CFR 51.2002 - Split shell.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Split shell. 51.2002 Section 51.2002 Agriculture... Standards for Grades of Filberts in the Shell 1 Definitions § 51.2002 Split shell. Split shell means a shell... of the shell, measured in the direction of the crack. ...

  5. Accumulation profiles of PrPSc in hemal nodes of naturally and experimentally scrapie-infected sheep

    Science.gov (United States)

    2013-01-01

    Background In classical scrapie, the disease-associated abnormal isoform (PrPSc) of normal prion protein accumulates principally in the nervous system and lymphoid tissues of small ruminants. Lymph nodes traffic leukocytes via lymphatic and blood vasculatures but hemal nodes lack lymphatic vessels and thus traffic leukocytes only via the blood. Although PrPSc accumulation profiles are well-characterized in ovine lymphoid tissues, there is limited information on such profiles in hemal nodes. Therefore, the objective of this study was to compare the follicular accumulation of PrPSc within hemal nodes and lymph nodes by prion epitope mapping and western blot studies. Results Our studies found that PrPSc accumulation in 82% of animals’ abdominal hemal nodes when PrPSc is detected in both mesenteric and retropharyngeal lymph nodes collected from preclinical and clinical, naturally and experimentally (blood transfusion) scrapie-infected sheep representing all three major scrapie-susceptible Prnp genotypes. Abdominal hemal nodes and retropharyngeal lymph nodes were then used to analyze immune cell phenotypes and PrPSc epitope mapping by immunohistochemistry and PrPSc banding patterns by western blot. Similar patterns of PrPSc accumulation were detected within the secondary follicles of hemal nodes and retropharyngeal lymph nodes, where cellular labeling was mostly associated with macrophages and follicular dendritic cells. The pattern of PrPSc accumulation within hemal nodes and retropharyngeal lymph nodes also did not differ with respect to epitope mapping with seven mAbs (N-terminus, n = 4; globular domain, n = 2; C-terminus, n = 1) in all three Prnp genotypes. Western blot analysis of hemal node and retropharyngeal lymph node homogenates revealed identical three banding patterns of proteinase K resistant PrPSc. Conclusion Despite the anatomical difference in leukocyte trafficking between lymph nodes and hemal nodes, the follicles of hemal nodes appear to

  6. Current Status and Future Research Opportunities for Electrochemical Capacitors: Relevance for Naval and Civilian Applications

    National Research Council Canada - National Science Library

    Long, Jeffrey W

    2008-01-01

    Electrochemical capacitors (ECs) are a class of energy-storage devices that offer significant promise in bridging the performance gap that exists between the high power density derived from electrostatic capacitors and the high...

  7. Integrated Diagnostic/Prognostic Experimental Setup for Capacitor Degradation and Health Monitoring

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper proposes the experiments and setups for studying diagnosis and prognosis of electrolytic capacitors in DC-DC power converters. Electrolytic capacitors and...

  8. Reliability Modeling Development and Its Applications for Ceramic Capacitors with Base-Metal Electrodes (BMEs)

    Science.gov (United States)

    Liu, Donhang

    2014-01-01

    This presentation includes a summary of NEPP-funded deliverables for the Base-Metal Electrodes (BMEs) capacitor task, development of a general reliability model for BME capacitors, and a summary and future work.

  9. RF MEMS Fractal Capacitors With High Self-Resonant Frequencies

    KAUST Repository

    Elshurafa, Amro M.

    2012-07-23

    This letter demonstrates RF microelectromechanical systems (MEMS) fractal capacitors possessing the highest reported self-resonant frequencies (SRFs) in PolyMUMPS to date. Explicitly, measurement results show SRFs beyond 20 GHz. Furthermore, quality factors higher than 4 throughout a band of 1-15 GHz and reaching as high as 28 were achieved. Additional benefits that are readily attainable from implementing fractal capacitors in MEMS are discussed, including suppressing residual stress warping, eliminating the need for etching holes, and reducing parasitics. The latter benefits were acquired without any fabrication intervention. © 2011 IEEE.

  10. Maintenance-free super-capacitor-based WSN power supply

    Science.gov (United States)

    Vidrascu, Mihai G.; Svasta, Paul; Vladescu, Marian

    2016-12-01

    Super-capacitors are highly reliable devices, outlasting any existing battery in operating conditions, cycle number and ruggedness. They are perfect candidates for energy storage in remote wireless sensor network nodes. Other applications [1] use a combination of rechargeable battery as the main storage device and a low capacity EDLC as energy buffer. This paper describes the design and the results from a module consisting of a single large capacitor, a MPPC charger and a boost converter. Unlike other devices, this prototype uses one storage device (a single EDLC), it does not involve software components [2] and it can operate from a single solar cell.

  11. Differential RF MEMS interwoven capacitor immune to residual stress warping

    KAUST Repository

    Elshurafa, Amro M.

    2012-07-27

    A RF MEMS capacitor with an interwoven structure is designed, fabricated in the PolyMUMPS process and tested in an effort to address fabrication challenges usually faced in MEMS processes. The interwoven structure was found to offer several advantages over the typical MEMS parallel-plate design including eliminating the warping caused by residual stress, eliminating the need for etching holes, suppressing stiction, reducing parasitics and providing differential capability. The quality factor of the proposed capacitor was higher than five throughout a 2–10 GHz range and the resonant frequency was in excess of 20 GHz.

  12. Online MOS Capacitor Characterization in LabVIEW Environment

    Directory of Open Access Journals (Sweden)

    Chinmay K Maiti

    2009-08-01

    Full Text Available We present an automated evaluation procedure to characterize MOS capacitors involving high-k gate dielectrics. Suitability of LabVIEW environment for online web-based semiconductor device characterization is demonstrated. Developed algorithms have been successfully applied to automate the MOS capacitor measurements for Capacitance-Voltage, Conductance-Voltage and Current-Voltage characteristics. Implementation of the algorithm for use as a remote internet-based characterization tool where the client and server communicate with each other via web services is also shown.

  13. Reliability Evaluation of Base-Metal-Electrode Multilayer Ceramic Capacitors for Potential Space Applications

    Science.gov (United States)

    Liu, David (Donhang); Sampson, Michael J.

    2011-01-01

    Base-metal-electrode (BME) ceramic capacitors are being investigated for possible use in high-reliability spacelevel applications. This paper focuses on how BME capacitors construction and microstructure affects their lifetime and reliability. Examination of the construction and microstructure of commercial off-the-shelf (COTS) BME capacitors reveals great variance in dielectric layer thickness, even among BME capacitors with the same rated voltage. Compared to PME (precious-metal-electrode) capacitors, BME capacitors exhibit a denser and more uniform microstructure, with an average grain size between 0.3 and 0.5 m, which is much less than that of most PME capacitors. BME capacitors can be fabricated with more internal electrode layers and thinner dielectric layers than PME capacitors because they have a fine-grained microstructure and do not shrink much during ceramic sintering. This makes it possible for BME capacitors to achieve a very high capacitance volumetric efficiency. The reliability of BME and PME capacitors was investigated using highly accelerated life testing (HALT). Most BME capacitors were found to fail with an early avalanche breakdown, followed by a regular dielectric wearout failure during the HALT test. When most of the early failures, characterized with avalanche breakdown, were removed, BME capacitors exhibited a minimum mean time-to-failure (MTTF) of more than 105 years at room temperature and rated voltage. Dielectric thickness was found to be a critical parameter for the reliability of BME capacitors. The number of stacked grains in a dielectric layer appears to play a significant role in determining BME capacitor reliability. Although dielectric layer thickness varies for a given rated voltage in BME capacitors, the number of stacked grains is relatively consistent, typically around 12 for a number of BME capacitors with a rated voltage of 25V. This may suggest that the number of grains per dielectric layer is more critical than the

  14. Differential evolutionary algorithm for distribution capacitor allocation considering varying load conditions

    OpenAIRE

    Karimi, Mohammad

    2011-01-01

    Many loads in power systems are inductive loads then consume reactive power, this fact lead to drop voltage and in worst case blackout and collapse voltage. Best option in distribution networks for avoid of this problem is installation of capacitor bank. In capacitor installation, finding optimal location and size of capacitor have special importance. In this paper, Differential Evolutionary (DE) algorithm is proposed for optimal placement and sizing of capacitor. Our objective funct...

  15. Failure Modes in Capacitors When Tested Under a Time-Varying Stress

    Science.gov (United States)

    Liu, David (Donhang)

    2011-01-01

    Steady step surge testing (SSST) is widely applied to screen out potential power-on failures in solid tantalum capacitors. The test simulates the power supply's on and off characteristics. Power-on failure has been the prevalent failure mechanism for solid tantalum capacitors for decoupling applications. On the other hand, the SSST can also be reviewed as an electrically destructive test under a time-varying stress. It consists of rapidly charging the capacitor with incremental voltage increases, through a low resistance in series, until the capacitor under test is electrically shorted. Highly accelerated life testing (HALT) is usually a time-efficient method for determining the failure mechanism in capacitors; however, a destructive test under a time-varying stress like SSST is even more effective. It normally takes days to complete a HALT test, but it only takes minutes for a time-varying stress test to produce failures. The advantage of incorporating specific time-varying stress into a statistical model is significant in providing an alternative life test method for quickly revealing the failure modes in capacitors. In this paper, a time-varying stress has been incorporated into the Weibull model to characterize the failure modes. The SSST circuit and transient conditions to correctly test the capacitors is discussed. Finally, the SSST was applied for testing polymer aluminum capacitors (PA capacitors), Ta capacitors, and multi-layer ceramic capacitors with both precious metal electrode (PME) and base-metal-electrodes (BME). It appears that testing results are directly associated to the dielectric layer breakdown in PA and Ta capacitors and are independent on the capacitor values, the way the capacitors being built, and the manufactures. The testing results also reveal that ceramic capacitors exhibit breakdown voltages more than 20 times the rated voltage, and the breakdown voltages are inverse proportional to the dielectric layer thickness. The possibility of

  16. Atomic Layer Deposition Alumina-Passivated Silicon Nanowires: Probing the Transition from Electrochemical Double-Layer Capacitor to Electrolytic Capacitor.

    Science.gov (United States)

    Gaboriau, Dorian; Boniface, Maxime; Valero, Anthony; Aldakov, Dmitry; Brousse, Thierry; Gentile, Pascal; Sadki, Said

    2017-04-19

    Silicon nanowires were coated by a 1-5 nm thin alumina layer by atomic layer deposition (ALD) in order to replace poorly reproducible and unstable native silicon oxide by a highly conformal passivating alumina layer. The surface coating enabled probing the behavior of symmetric devices using such electrodes in the EMI-TFSI electrolyte, allowing us to attain a large cell voltage up to 6 V in ionic liquid, together with very high cyclability with less than 4% capacitance fade after 10 6 charge/discharge cycles. These results yielded fruitful insights into the transition between an electrochemical double-layer capacitor behavior and an electrolytic capacitor behavior. Ultimately, thin ALD dielectric coatings can be used to obtain hybrid devices exhibiting large cell voltage and excellent cycle life of dielectric capacitors, while retaining energy and power densities close to the ones displayed by supercapacitors.

  17. Accelerated lifetime testing of energy storage capacitors used in particle accelerators power converters

    CERN Document Server

    AUTHOR|(SzGeCERN)679542; Genton, Charles-Mathieu

    2015-01-01

    Energy storage capacitors are used in large quantities in high power converters for particle accelerators. In this application capacitors see neither a DC nor an AC voltage but a combination of the two. The paper presents a new power converter explicitly designed to perform accelerated testing on these capacitors and the results of the tests.

  18. Integration substrate with a ultra-high-density capacitor and a through-substrate via

    NARCIS (Netherlands)

    Klootwijk, J.H.; Roozeboom, F.; Ruigrok, J.J.M.; Reefman, D.

    2014-01-01

    An integration substrate for a system in package comprises a through-substrate via and a trench capacitor wherein with a trench filling that includes at least four electrically conductive capacitor-electrode layers in an alternating arrangement with dielectric layers. --The capacitor-electrode

  19. Degradation Effect on Reliability Evaluation of Aluminum Electrolytic Capacitor in Backup Power Converter

    DEFF Research Database (Denmark)

    Zhou, Dao; Wang, Huai; Blaabjerg, Frede

    2017-01-01

    DC capacitors in power electronic converters are a major constraint on improvement of power density as well as reliability. In this paper, according to the degradation data of electrolytic capacitors through the accelerated test, the time-to-failure of the capacitor cell is acquired and it can be...

  20. Pre-charging of module capacitors of MMC when the module ...

    Indian Academy of Sciences (India)

    Shamkant D Joshi

    linear regulator. It was observed experimentally in [9] that the capacitor voltage stabilizes for two modules in series. Figure 8 shows capacitors of two modules charging through a resistor R and an inductor L. The resistor R is included to limit the initial current. The load across the module capacitor is represented by negative- ...

  1. The Two-Capacitor Problem Revisited: A Mechanical Harmonic Oscillator Model Approach

    Science.gov (United States)

    Lee, Keeyung

    2009-01-01

    The well-known two-capacitor problem, in which exactly half the stored energy disappears when a charged capacitor is connected to an identical capacitor, is discussed based on the mechanical harmonic oscillator model approach. In the mechanical harmonic oscillator model, it is shown first that "exactly half" the work done by a constant applied…

  2. A quick method to determine the capacitance characteristics of thin layer X5R multilayer capacitors

    NARCIS (Netherlands)

    Mikkenie, R.; Steigelmann, O.; Groen, W.A.; Elshof, J.E. ten

    2012-01-01

    The effect of Y2O3 concentration on the dielectric properties of ceramic disc capacitors and multilayer capacitors containing 50 dielectric layers with an approximate thickness of 3µm were investigated. The relative permittivity and temperature coefficient of capacity of multilayer capacitors at low

  3. Cadmium and lead accumulations and agronomic quality of a newly bred pollution-safe cultivar (PSC) of water spinach.

    Science.gov (United States)

    Huang, Ying-Ying; Mu, Yang-Xiu; He, Chun-Tao; Fu, Hui-Ling; Wang, Xue-Song; Gong, Fei-Yue; Yang, Zhong-Yi

    2018-02-07

    Breeding for pollution-safe cultivars (PSCs) can reduce pollutant accumulation in crops. However, the PSC breeding would face the risk of nutritional quality reduction, which is usually ignored in conventional breeding programs targeting to increase crop yield or nutritional quality. Thus, the doubt whether the risk would exist has to be clarified for supporting the PSC breeding. In the present study, a newly bred Cd/Pb-PSC of water spinach (Ipomoea aquatic Forsk.) and its parents (QLQ with low-Cd/Pb accumulation ability and T308 with high yield) of water spinach were employed to clarify the above-mentioned issue. Yields, and concentrations of Cd, Pb, nitrite, and organic and inorganic nutrients in shoots of the three experimental lines were determined. There were no significant differences in Cd/Pb concentration between the new PSC and QLQ, in nitrite content between the new PSC and its two parents and in yield between the new PSC and T308. It is decisively significant that shoot concentrations of organic and inorganic nutrients in the Cd/Pb-PSC were as high as those in one of its parents. It is affirmed that the breeding operations (crossing and consequently continuous selfing) for lowering Cd/Pb accumulation capacity of water spinach would not lower the nutritional values of the obtained Cd/Pb-PSCs from the breeding, which should be a pillar that supports the feasibility to minimize Cd/Pb pollution in vegetables using PSC-breeding method.

  4. File list: Unc.PSC.20.AllAg.mESC_derived_pancreatic_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.mESC_derived_pancreatic_cells mm9 Unclassified Pluripotent stem cell mESC derived pancreat...ic cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.20.AllAg.mESC_derived_pancreatic_cells.bed ...

  5. File list: NoD.PSC.10.AllAg.mESC_derived_pancreatic_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.mESC_derived_pancreatic_cells mm9 No description Pluripotent stem ...cell mESC derived pancreatic cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.mESC_derived_pancreatic_cells.bed ...

  6. File list: Unc.PSC.50.AllAg.mESC_derived_pancreatic_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.mESC_derived_pancreatic_cells mm9 Unclassified Pluripotent stem cell mESC derived pancreat...ic cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.50.AllAg.mESC_derived_pancreatic_cells.bed ...

  7. File list: ALL.PSC.20.AllAg.mESC_derived_pancreatic_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.mESC_derived_pancreatic_cells mm9 All antigens Pluripotent stem cell mESC derived pancreat...cedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.20.AllAg.mESC_derived_pancreatic_cells.bed ...

  8. File list: Oth.PSC.05.AllAg.mESC_derived_pancreatic_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.mESC_derived_pancreatic_cells mm9 TFs and others Pluripotent stem ...cell mESC derived pancreatic cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.mESC_derived_pancreatic_cells.bed ...

  9. File list: InP.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 Input control Pluripotent stem cell mESC derived meso...://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  10. File list: NoD.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 No description Pluripotent stem cell mESC derived meso...dermal cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  11. File list: Oth.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 TFs and others Pluripotent stem cell mESC derived meso...282665,SRX504214,SRX504215,SRX282666,SRX282670,SRX757574,SRX504218 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  12. File list: Unc.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 Unclassified Pluripotent stem cell mESC derived meso...cedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  13. File list: NoD.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 No description Pluripotent stem cell mESC derived meso...dermal cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  14. File list: Pol.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 RNA polymerase Pluripotent stem cell mESC derived meso...dermal cells SRX305931,SRX305930 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  15. File list: Pol.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 RNA polymerase Pluripotent stem cell mESC derived meso...dermal cells SRX305930,SRX305931 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  16. File list: NoD.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 No description Pluripotent stem cell mESC derived meso...dermal cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  17. File list: Pol.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 RNA polymerase Pluripotent stem cell mESC derived meso...dermal cells SRX305931,SRX305930 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  18. File list: Pol.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 RNA polymerase Pluripotent stem cell mESC derived meso...dermal cells SRX305931,SRX305930 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  19. File list: DNS.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 DNase-seq Pluripotent stem cell mESC derived meso...dermal cells SRX404483,SRX404484 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  20. File list: ALL.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 All antigens Pluripotent stem cell mESC derived meso...RX282671,SRX504221,SRX504218,SRX504220,SRX122635,SRX122639 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  1. File list: His.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 Histone Pluripotent stem cell mESC derived meso...,SRX504210,SRX305913,SRX122648,SRX122635,SRX122639 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  2. File list: InP.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 Input control Pluripotent stem cell mESC derived meso...://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  3. File list: InP.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 Input control Pluripotent stem cell mESC derived meso...://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  4. File list: ALL.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 All antigens Pluripotent stem cell mESC derived meso...RX504220,SRX282671,SRX122648,SRX122635,SRX122647,SRX122639 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  5. File list: Oth.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 TFs and others Pluripotent stem cell mESC derived meso...470250,SRX282670,SRX757574,SRX504214,SRX504219,SRX504218,SRX504215 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  6. File list: Unc.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 Unclassified Pluripotent stem cell mESC derived meso...cedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  7. File list: ALL.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 All antigens Pluripotent stem cell mESC derived meso...RX122645,SRX122639,SRX122646,SRX122637,SRX122635,SRX504223 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  8. File list: Oth.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 TFs and others Pluripotent stem cell mESC derived meso...282665,SRX504215,SRX282666,SRX282670,SRX504219,SRX757574,SRX504218 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  9. File list: InP.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 Input control Pluripotent stem cell mESC derived meso...://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  10. File list: NoD.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 No description Pluripotent stem cell mESC derived meso...dermal cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  11. File list: Unc.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 Unclassified Pluripotent stem cell mESC derived meso...cedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  12. File list: His.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 Histone Pluripotent stem cell mESC derived meso...,SRX122639,SRX122646,SRX122637,SRX122635,SRX504223 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  13. File list: Oth.PSC.50.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.AllAg.mESC_derived_mesodermal_cells mm9 TFs and others Pluripotent stem cell mESC derived meso...282665,SRX282670,SRX504214,SRX504219,SRX504218,SRX504215,SRX757574 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.AllAg.mESC_derived_mesodermal_cells.bed ...

  14. File list: ALL.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 All antigens Pluripotent stem cell mESC derived meso...RX122646,SRX122647,SRX122638,SRX122648,SRX122639,SRX122635 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  15. File list: His.PSC.10.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.mESC_derived_mesodermal_cells mm9 Histone Pluripotent stem cell mESC derived meso...,SRX305914,SRX122648,SRX122635,SRX122647,SRX122639 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.10.AllAg.mESC_derived_mesodermal_cells.bed ...

  16. File list: Unc.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 Unclassified Pluripotent stem cell mESC derived meso...cedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  17. File list: DNS.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 DNase-seq Pluripotent stem cell mESC derived meso...dermal cells SRX404483,SRX404484 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  18. File list: His.PSC.20.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.mESC_derived_mesodermal_cells mm9 Histone Pluripotent stem cell mESC derived meso...,SRX122647,SRX122638,SRX122648,SRX122639,SRX122635 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.20.AllAg.mESC_derived_mesodermal_cells.bed ...

  19. File list: DNS.PSC.05.AllAg.mESC_derived_mesodermal_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.mESC_derived_mesodermal_cells mm9 DNase-seq Pluripotent stem cell mESC derived meso...dermal cells SRX404483,SRX404484 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.05.AllAg.mESC_derived_mesodermal_cells.bed ...

  20. File list: NoD.PSC.20.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.20.AllAg.mESCs,_differentiated mm9 No description Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.20.AllAg.mESCs,_differentiated.bed ...

  1. File list: NoD.PSC.10.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.mESCs,_differentiated mm9 No description Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.mESCs,_differentiated.bed ...

  2. File list: NoD.PSC.05.AllAg.mESCs,_differentiated [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.mESCs,_differentiated mm9 No description Pluripotent stem cell mESCs, different...iated http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.05.AllAg.mESCs,_differentiated.bed ...

  3. File list: Oth.PSC.05.AllAg.mESC_derived_haematopoietic_progenitor [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.mESC_derived_haematopoietic_progenitor mm9 TFs and others Pluripot...ent stem cell mESC derived haematopoietic progenitor SRX310196,SRX825828,SRX825829,SRX021436,SRX310197,SRX37...iencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.mESC_derived_haematopoietic_progenitor.bed ...

  4. File list: NoD.PSC.50.AllAg.mESC_derived_haematopoietic_progenitor [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.50.AllAg.mESC_derived_haematopoietic_progenitor mm9 No description Pluripot...ent stem cell mESC derived haematopoietic progenitor http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.50.AllAg.mESC_derived_haematopoietic_progenitor.bed ...

  5. File list: Oth.PSC.20.AllAg.mESC_derived_haematopoietic_progenitor [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.AllAg.mESC_derived_haematopoietic_progenitor mm9 TFs and others Pluripot...ent stem cell mESC derived haematopoietic progenitor SRX825828,SRX310197,SRX310196,SRX825829,SRX021436,SRX37...iencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.AllAg.mESC_derived_haematopoietic_progenitor.bed ...

  6. File list: DNS.PSC.10.AllAg.mESC_derived_haematopoietic_progenitor [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.mESC_derived_haematopoietic_progenitor mm9 DNase-seq Pluripotent s...tem cell mESC derived haematopoietic progenitor http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.10.AllAg.mESC_derived_haematopoietic_progenitor.bed ...

  7. File list: Pol.PSC.20.AllAg.mESC_derived_haematopoietic_progenitor [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.mESC_derived_haematopoietic_progenitor mm9 RNA polymerase Pluripot...ent stem cell mESC derived haematopoietic progenitor http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.20.AllAg.mESC_derived_haematopoietic_progenitor.bed ...

  8. File list: Oth.PSC.10.AllAg.mESC_derived_haematopoietic_progenitor [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.mESC_derived_haematopoietic_progenitor mm9 TFs and others Pluripot...ent stem cell mESC derived haematopoietic progenitor SRX310196,SRX825828,SRX825829,SRX021436,SRX310197,SRX82...iencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.AllAg.mESC_derived_haematopoietic_progenitor.bed ...

  9. File list: Pol.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 RNA polymerase Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  10. File list: Unc.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 Unclassified Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  11. File list: InP.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 Input control Pluripotent stem cell mESC derived epib...last-like cells SRX1082041 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  12. File list: Unc.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 Unclassified Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  13. File list: InP.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 Input control Pluripotent stem cell mESC derived epib...last-like cells SRX1082041 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  14. File list: His.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 Histone Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  15. File list: His.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 Histone Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  16. File list: ALL.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 All antigens Pluripotent stem cell mESC derived epib...1,SRX1082043,SRX1082042,SRX336247,SRX336248,SRX336249 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  17. File list: His.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 Histone Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  18. File list: DNS.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 DNase-seq Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  19. File list: DNS.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 DNase-seq Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  20. File list: DNS.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 DNase-seq Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  1. File list: Pol.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 RNA polymerase Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  2. File list: Oth.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 TFs and others Pluripotent stem cell mESC derived epib...last-like cells SRX1082043,SRX1082042 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  3. File list: Oth.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 TFs and others Pluripotent stem cell mESC derived epib...last-like cells SRX1082042,SRX1082043 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  4. File list: NoD.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 No description Pluripotent stem cell mESC derived epib...48,SRX336242,SRX336241 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  5. File list: Pol.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 RNA polymerase Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  6. File list: InP.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 Input control Pluripotent stem cell mESC derived epib...last-like cells SRX1082041 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  7. File list: NoD.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 No description Pluripotent stem cell mESC derived epib...41,SRX336249,SRX336248 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  8. File list: His.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 Histone Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  9. File list: Oth.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 TFs and others Pluripotent stem cell mESC derived epib...last-like cells SRX1082043,SRX1082042 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  10. File list: Unc.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 Unclassified Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  11. File list: Oth.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 TFs and others Pluripotent stem cell mESC derived epib...last-like cells SRX1082043,SRX1082042 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  12. File list: ALL.PSC.10.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.mESC_derived_epiblast-like_cells mm9 All antigens Pluripotent stem cell mESC derived epib...3,SRX1082041,SRX336241,SRX1082042,SRX336249,SRX336248 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.10.AllAg.mESC_derived_epiblast-like_cells.bed ...

  13. File list: Unc.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 Unclassified Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  14. File list: NoD.PSC.50.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.50.AllAg.mESC_derived_epiblast-like_cells mm9 No description Pluripotent stem cell mESC derived epib...47,SRX336248,SRX336249 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.50.AllAg.mESC_derived_epiblast-like_cells.bed ...

  15. File list: ALL.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 All antigens Pluripotent stem cell mESC derived epib...,SRX1082042,SRX336242,SRX336241,SRX1082041,SRX1082043 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  16. File list: DNS.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 DNase-seq Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  17. File list: NoD.PSC.20.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.20.AllAg.mESC_derived_epiblast-like_cells mm9 No description Pluripotent stem cell mESC derived epib...47,SRX336248,SRX336249 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.20.AllAg.mESC_derived_epiblast-like_cells.bed ...

  18. File list: InP.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 Input control Pluripotent stem cell mESC derived epib...last-like cells SRX1082041 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  19. File list: Pol.PSC.05.AllAg.mESC_derived_epiblast-like_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.mESC_derived_epiblast-like_cells mm9 RNA polymerase Pluripotent stem cell mESC derived epib...last-like cells http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.05.AllAg.mESC_derived_epiblast-like_cells.bed ...

  20. File list: Pol.PSC.05.AllAg.hESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.hESC_derived_neural_cells hg19 RNA polymerase Pluripotent stem cell hESC derived neural... cells SRX190259 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.05.AllAg.hESC_derived_neural_cells.bed ...

  1. File list: NoD.PSC.10.AllAg.hESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.hESC_derived_neural_cells hg19 No description Pluripotent stem cell hESC derived neural...edbc.jp/kyushu-u/hg19/assembled/NoD.PSC.10.AllAg.hESC_derived_neural_cells.bed ...

  2. File list: NoD.PSC.10.AllAg.mESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.mESC_derived_neural_cells mm9 No description Pluripotent stem cell mESC derived neural... cells SRX440736,SRX440731 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.PSC.10.AllAg.mESC_derived_neural_cells.bed ...

  3. File list: InP.PSC.50.AllAg.hESC_derived_neural_crests [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.50.AllAg.hESC_derived_neural_crests hg19 Input control Pluripotent stem cell hESC derived neural... crests SRX1091573,SRX059369,SRX059361 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.50.AllAg.hESC_derived_neural_crests.bed ...

  4. File list: His.PSC.50.AllAg.hESC_derived_neural_crests [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.hESC_derived_neural_crests hg19 Histone Pluripotent stem cell hESC derived neural...30,SRX059362,SRX1091539,SRX059364 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.50.AllAg.hESC_derived_neural_crests.bed ...

  5. File list: Unc.PSC.20.AllAg.hESC_derived_neural_crests [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.hESC_derived_neural_crests hg19 Unclassified Pluripotent stem cell hESC derived neural... crests SRX059366 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.20.AllAg.hESC_derived_neural_crests.bed ...

  6. File list: DNS.PSC.05.AllAg.hESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.hESC_derived_neural_cells hg19 DNase-seq Pluripotent stem cell hESC derived neural... cells SRX121241,SRX134721 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.05.AllAg.hESC_derived_neural_cells.bed ...

  7. File list: DNS.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.iPS_derived_neural_cells hg19 DNase-seq Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  8. File list: InP.PSC.10.AllAg.hESC_derived_neural_crests [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.10.AllAg.hESC_derived_neural_crests hg19 Input control Pluripotent stem cell hESC derived neural... crests SRX1091573,SRX059369,SRX059361 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.10.AllAg.hESC_derived_neural_crests.bed ...

  9. File list: Oth.PSC.50.AllAg.mESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.AllAg.mESC_derived_neural_cells mm9 TFs and others Pluripotent stem cell mESC derived neural...13762,SRX213759,SRX352995 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.AllAg.mESC_derived_neural_cells.bed ...

  10. File list: Pol.PSC.05.AllAg.hESC_derived_neural_crests [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.hESC_derived_neural_crests hg19 RNA polymerase Pluripotent stem cell hESC derived neural... crests http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.05.AllAg.hESC_derived_neural_crests.bed ...

  11. File list: His.PSC.10.AllAg.mESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.mESC_derived_neural_cells mm9 Histone Pluripotent stem cell mESC derived neural...tp://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.10.AllAg.mESC_derived_neural_cells.bed ...

  12. File list: Oth.PSC.05.AllAg.mESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.mESC_derived_neural_cells mm9 TFs and others Pluripotent stem cell mESC derived neural...10563,SRX213763,SRX352996 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.mESC_derived_neural_cells.bed ...

  13. File list: DNS.PSC.50.AllAg.hESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.50.AllAg.hESC_derived_neural_cells hg19 DNase-seq Pluripotent stem cell hESC derived neural... cells SRX121241,SRX134721 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.50.AllAg.hESC_derived_neural_cells.bed ...

  14. File list: Oth.PSC.05.AllAg.hESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.hESC_derived_neural_cells hg19 TFs and others Pluripotent stem cell hESC derived neural...http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.05.AllAg.hESC_derived_neural_cells.bed ...

  15. File list: InP.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.AllAg.iPS_derived_neural_cells hg19 Input control Pluripotent stem cell iPS derived neural... cells SRX702550 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  16. File list: DNS.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.iPS_derived_neural_cells hg19 DNase-seq Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  17. File list: Oth.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.iPS_derived_neural_cells hg19 TFs and others Pluripotent stem cell iPS derived neural...X968910 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  18. File list: His.PSC.10.AllAg.hESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.hESC_derived_neural_cells hg19 Histone Pluripotent stem cell hESC derived neural...681,SRX729697,SRX729688,SRX729682,SRX729698,SRX729689,SRX729709 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.10.AllAg.hESC_derived_neural_cells.bed ...

  19. File list: Oth.PSC.10.AllAg.mESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.mESC_derived_neural_cells mm9 TFs and others Pluripotent stem cell mESC derived neural...13763,SRX213758,SRX352996 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.AllAg.mESC_derived_neural_cells.bed ...

  20. File list: Unc.PSC.10.AllAg.mESC_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.10.AllAg.mESC_derived_neural_cells mm9 Unclassified Pluripotent stem cell mESC derived neural...,SRX213757,SRX213761 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.PSC.10.AllAg.mESC_derived_neural_cells.bed ...