Special Purpose Materials annual progress report, October 1, 1979

International Nuclear Information System (INIS)

1980-04-01

The scope of Special Purpose Materials covers fusion reactor materials problems other than the first-wall and blanket structural materials, which are under the purview of the ADIP, DAFS, and PMI task groups. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, graphite and SiC, heat-sink materials, ceramics, and materials for high-field (> 10-T) superconducting magnets. It is recognized that there will be numerous materials problems that will arise during the design and construction of large magnetic-fusion energy devices such as the Engineering Test Facility (ETF) and Demonstration Reactor (DEMO). Most of these problems will be specific to a particular design or project and are the responsibility of the project, not the Materials and Radiation Effects Branch. Consequently, the Task Group on Special Purpose Materials has limited its concern to crucial and generic materials problems that must be resolved if magnetic-fusion devices are to succeed. Important areas specifically excluded include low-field (8-T) superconductors, fuels for hybrids, and materials for inertial-confinement devices. These areas may be added in the future when funding permits

A special purpose simulation language for nuclear power plants

International Nuclear Information System (INIS)

Saphier, D.

1980-01-01

A special purpose block-oriented simulation language, 'The Dynamic Simulator for Nuclear Power Plants' (DSNP), was developed at Argonne National Laboratory. The dominant feature of DSNP is the ability to transform a power plant flowchart or block diagram directly into a simulation program. The user is required to recognize the symbolic DSNP statements for the appropriate physical component, and list these statements in a logical sequence according to the flow of physical properties in the simulated power plant. At present most of the component models in DSNP are of the lumped parameter type. Although DSNP is a special purpose simulation language, it also has all the features of a general purpose simulation language, and in particular a powerful macro processor. The use of DSNP is demonstrated by a sample problem simulating a reactor startup accident. (Auth.)

UTV Expansion Pack: Special-Purpose Rank-Revealing Algorithms

DEFF Research Database (Denmark)

Fierro, Ricardo D.; Hansen, Per Christian

2005-01-01

This collection of Matlab 7.0 software supplements and complements the package UTV Tools from 1999, and includes implementations of special-purpose rank-revealing algorithms developed since the publication of the original package. We provide algorithms for computing and modifying symmetric rank-r...... values of a sparse or structured matrix. These new algorithms have applications in signal processing, optimization and LSI information retrieval.......This collection of Matlab 7.0 software supplements and complements the package UTV Tools from 1999, and includes implementations of special-purpose rank-revealing algorithms developed since the publication of the original package. We provide algorithms for computing and modifying symmetric rank......-revealing VSV decompositions, we expand the algorithms for the ULLV decomposition of a matrix pair to handle interference-type problems with a rank-deficient covariance matrix, and we provide a robust and reliable Lanczos algorithm which - despite its simplicity - is able to capture all the dominant singular...

A basic study on universal design of auditory signals in automobiles.

Science.gov (United States)

Yamauchi, Katsuya; Choi, Jong-dae; Maiguma, Ryo; Takada, Masayuki; Iwamiya, Shin-ichiro

2004-11-01

In this paper, the impression of various kinds of auditory signals currently used in automobiles and a comprehensive evaluation were measured by a semantic differential method. The desirable acoustic characteristic was examined for each type of auditory signal. Sharp sounds with dominant high-frequency components were not suitable for auditory signals in automobiles. This trend is expedient for the aged whose auditory sensitivity in the high frequency region is lower. When intermittent sounds were used, a longer OFF time was suitable. Generally, "dull (not sharp)" and "calm" sounds were appropriate for auditory signals. Furthermore, the comparison between the frequency spectrum of interior noise in automobiles and that of suitable sounds for various auditory signals indicates that the suitable sounds are not easily masked. The suitable auditory signals for various purposes is a good solution from the viewpoint of universal design.

Smog and Your Automobile. [Teacher's Manual, Filmstrip, Record].

Science.gov (United States)

California State Dept. of Public Health, Berkeley.

A filmstrip, 33 1/3 RPM record, and teacher's manual are combined in this set to be used in driver education classes at the senior high school level. Their main purpose is to inform future drivers how they can minimize pollution from their automobiles through proper car maintenance and good driving habits. Content of the manual is divided into…

Consumer preferences for automobile energy-efficiency grades

International Nuclear Information System (INIS)

Koo, Yoonmo; Kim, Chang Seob; Hong, Junhee; Choi, Ie-Jung; Lee, Jongsu

2012-01-01

Recently, increases in energy prices have made energy conservation and efficiency improvements even more essential than in the past. However, consumers experience difficulty in obtaining reliable information regarding energy efficiency, so that many countries have implemented regulations to enforce energy-efficiency grade labeling. In this study, consumer preferences regarding energy efficiency grades are analyzed by the mixed logit and MDCEV model based on the revealed preference data of past automobile purchases. Findings show that consumers rationally apply information on energy efficiency grades when purchasing automobiles. However, they tend to show inefficiency in automobile usage patterns. This study discusses political implications of energy efficiency policies as they might impact consumer behaviors of automobile purchase and usage. - Highlights: ► We model discrete choice model to evaluate energy-efficiency grade regulation. ► Consumers apply information on energy efficiency grades when purchasing automobiles. ► However, they tend to show inefficiency in automobile usage patterns. ► The policies for efficient automobile usage are discussed.

12 CFR 202.8 - Special purpose credit programs.

Science.gov (United States)

2010-01-01

... requirements of paragraph (a) of this section, a creditor may request and consider information regarding the... the case of financial need. If financial need is one of the criteria under a special purpose credit.... Subject to the provisions of paragraph (b) of this section, the Act and this regulation permit a creditor...

Corrosion protection and finishing of automobiles

International Nuclear Information System (INIS)

Sheikh, S.T.

2005-01-01

finishing of automobiles is an important aspect. There have been considerable reductions of weight in automobiles by the use of composites components replacing heavy metallic components. Fenders previously based on metal have been replaced with plastic and painted with the same colour shade as of the metallic body, this has eps for proper adhesion of the paints on the plastic fender to avoid chipping off the paint form it. This paper discusses the necessary processes required for finishing of an automobile along with the corrosion protection measures. Automobiles contains a variety of engineering materials, engine main body fuel tanks connecting rods heat radiators and other mechanical parts are made from different types of engineering alloys having varying chemical compositions. Other parts like dashboard, front panel and other are made from composites. The main body made from cold roll ed steel having various contours 'c' it due to the different designs is the potential site for corrosion attack, The main body is exposed to the hostile environment through out its life period. An automobile is given a particular finish with a view to counter the hostile environments as they are not limited for plying in a limiting conditions and are taken to different weather conditions in one day thus facing severe stresses and strain. Thus it is essential that an automobile before rolling 'out of the assembly line should properly corrosion resistant and aesthetically pleasant also. Finishing for automobiles being very specialized, the main requirement being maximum durability with minimum numbers of coats baked, at the fastest possible schedule. High gloss and range of good eye catching colours being important to increase sales appeal. In the near past the car finishes were based on alkyd-amino resins baking materials and force drying lacquers, which have excellent appearance originally and maintain it on aging. The finishing system for the synthetic baking type may consist of

Geotechnical Monitoring of the Automobile Road

Science.gov (United States)

Matsiy, Vladimir

2017-12-01

In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

Architecture and program structures for a special purpose finite element computer

Energy Technology Data Exchange (ETDEWEB)

Norrie, D.H.; Norrie, C.W.

1983-01-01

The development of very large scale integration (VLSI) has made special-purpose computers economically possible. With such a machine, the loss of flexibility compared with a general-purpose computer can be offset by the increased speed which can be obtained by tailoring the architecture to the particular problem or class of problem. The first kind of special-purpose machine has its architecture modelled on the physical structure of the problem and the second kind has its design tailored to the computational algorithm used. The parallel finite element machine (PARFEM) being designed at the University of Calgary for the solution of finite element problems is of the second kind. Its conceptual design is described and progress to date outlined. 14 references.

Employability and Technical Skill Required to Establish a Small Scale Automobile Workshop

Science.gov (United States)

Olaitan, Olawale O.; Ikeh, Joshua O.

2015-01-01

The study focused on identifying the employability and technical skills needed to establish small-scale automobile workshop in Nsukka Urban of Enugu State. Five purposes of the study were stated to guide the study. Five research questions were stated and answered in line with the purpose of the study. The population for the study is 1,500…

The Hybrid Automobile and the Atkinson Cycle

Science.gov (United States)

Feldman, Bernard J.

2008-01-01

The hybrid automobile is a strikingly new automobile technology with a number of new technological features that dramatically improve energy efficiency. This paper will briefly describe how hybrid automobiles work; what are these new technological features; why the Toyota Prius hybrid internal combustion engine operates on the Atkinson cycle…

77 FR 45921 - Alaskan Fuel Hauling as a Restricted Category Special Purpose Flight Operation

Science.gov (United States)

2012-08-02

... operations, each aircraft used to transport fuel will be required to receive FAA certification for the... regulations. The special purpose of Alaskan fuel hauling was considered for aircraft type-certificated under... required for this special purpose. The fuel hauling system must be shown to meet the applicable...

Wind driven mobile charging of automobile battery- A case study ...

African Journals Online (AJOL)

This paper deals with implementation of mobile wind driven generator technology to produce electricity in charging of two wheeler (12V) automobile battery. The use of PWM methodology with pulse charging method at a constant rate has been adopted for this purpose. The low speed PMSG driven by wind at speed of ...

Fourth annual progress report on special-purpose materials for magnetically confined fusion reactors

International Nuclear Information System (INIS)

1982-08-01

The scope of Special Purpose Materials covers fusion reactor materials problems other than the first-wall and blanket structural materials, which are under the purview of the ADIP, DAFS, and PMI task groups. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, graphite and SiC, heat-sink materials, ceramics, and materials for high-field (>10-T) superconducting magnets. The Task Group on Special Purpose Materials has limited its concern to crucial and generic materials problems that must be resolved if magnetic-fusion devices are to succeed. Important areas specifically excluded include low-field (8-T) superconductors, fuels for hybrids, and materials for inertial-confinement devices. These areas may be added in the future when funding permits

Tokamak Fusion Core Experiment (TFCX) special-purpose remote maintenance systems

International Nuclear Information System (INIS)

Masson, L.S.; Welland, H.J.

1985-01-01

A key element in the preconceptual design of the Tokamak Fusion Core Experiment (TFCX) was the development of design concepts for special-purpose remote maintenance systems. Included were systems for shield sector replacement, vacuum vessel sector and toroidal field coil replacement, limiter blade replacement, protective tile replacement, and general-purpose maintenance. This paper addresses these systems as they apply to the copper toroidal field (TF) coil version of the TFCX

Subjective measures of work-related fatigue in automobile factory employees.

Science.gov (United States)

Guo, Fu; Wang, Tianbo; Ning, Zuojiang

2017-01-01

Work-related fatigue is common among automobile factory employees. The purpose of this study was to assess fatigue of employees at a Chinese automobile factory. 238 employees (119 engineers and 119 workers) participated in this study. The following questionnaires were completed: demographic survey questionnaire, working condition questionnaire (WCQ), functional assessment of chronic illness therapy-fatigue (FACIT-F), subscales of multidimensional fatigue inventory (MFI), and Pittsburgh sleep quality index (PSQI). Both engineers and workers experienced fatigue. The workers (35.6 years old, SD = 6.7) generally felt more fatigue than engineers (42.6 years old, SD = 6.4). The engineers claimed to be more satisfied with the working conditions than workers. The WCQ showed good properties for assessing work-related factors, which were significantly correlated with fatigue (r = 0.568 for engineers and r = 0.639 for workers). For engineers, general fatigue was observed regularly and frequently, and for workers, physical fatigue usually had a long duration. The fatigue was significantly correlated with work-related factors, especially working environment and monotony. For workers, the duration of the work day also affected their fatigue. Some improvements to the working condition in this automobile factory should be considered.

Historical Financial Data - Domestic Automobile Manufacturers

Science.gov (United States)

1979-01-01

A historical financial data base was developed for the four major U.S. automobile manufacturers, focusing on the specific operations associated with production and marketing of automobiles and light trucks. The years subject to analysis were 1967-197...

Oil prices, SUVs, and Iraq. An investigation of automobile manufacturer oil price sensitivity

Energy Technology Data Exchange (ETDEWEB)

Cameron, Ken [United States Navy (United States); Schnusenberg, Oliver [Department of Accounting and Finance, Coggin College of Business, The University of North Florida, 1 UNF Drive, Jacksonville, FL 32224 (United States)

2009-05-15

There has been much speculation about the recent upsurge in crude oil prices and the effect it will have on the economy and business. The objective of this paper is to investigate the relationship between oil prices and stock prices of automobile manufacturers. We add an oil price factor, measured alternatively by the excess change in WTI crude oil prices or the excess return on an energy ETF, to the Fama-French three-factor model over the period March 20, 2001 to September 30, 2008. Our dependent variable is the excess return on a price-weighted index of automobile manufacturers. Results indicate that oil prices add value to the pricing model, particularly for manufacturers specializing in SUVs and for a subperiod following the Iraq invasion on March 19, 2003. (author)

Recent trends in automobile recycling: An energy and economic assessment

Energy Technology Data Exchange (ETDEWEB)

Curlee, T.R.; Das, S.; Rizy, C.G. [Oak Ridge National Lab., TN (United States); Schexanyder, S.M. [Tennessee Univ., Knoxville, TN (United States). Dept. of Biochemistry

1994-03-01

Recent and anticipated trends in the material composition of domestic and imported automobiles and the increasing cost of landfilling the non-recyclable portion of automobiles (automobile shredder residue or ASR) pose questions about the future of automobile recycling. This report documents the findings of a study sponsored by the US Department of Energy`s Office of Environmental Analysis to examine the impacts of these and other relevant trends on the life-cycle energy consumption of automobiles and on the economic viability of the domestic automobile recycling industry. More specifically, the study (1) reviewed the status of the automobile recycling industry in the United States, including the current technologies used to process scrapped automobiles and the challenges facing the automobile recycling industry; (2) examined the current status and future trends of automobile recycling in Europe and Japan, with the objectives of identifying ``lessons learned`` and pinpointing differences between those areas and the United States; (3) developed estimates of the energy system impacts of the recycling status quo and projections of the probable energy impacts of alternative technical and institutional approaches to recycling; and (4) identified the key policy questions that will determine the future economic viability of automobile shredder facilities in the United States.

Use of the water supply system of special purpose in buildings

Directory of Open Access Journals (Sweden)

Orlov Evgeniy Vladimirovich

Full Text Available A water supply system of a special purpose is a necessary element in hot and cold shops of the industrial enterprises, office buildings and the medical centers, and also other rooms. The water supply systems of a special purpose, which give subsalty, sparkling water and water sated with oxygen, allow people to prevent, for example, strong dehydration of an organism, which is possible at big losses of water, especially in case of the people working in hot shops. Various elements of special drinking water supply system are given in the article, their main functions are described. Different types of the water folding devices pumping water to consumers, one of which is drinking fountain, are considered. Possible systems of water filtration, which can be established for quality improvement, are transferred. Among them the great role is played by membrane technologies and the return osmosis, which is widely applied now. Today there is a possibility of construction, both the centralized water supply system of a special purpose, and local. Besides, the least is a more preferable option taking into account capital expenditure for construction and operation, and also it can lead to solid resource-saving as a result of the electric energy saving going for water heating in heaters. Automatic machines of drinking water for a local water supply system of a special purpose have indisputable advantages. They are capable to carry out several functions at the same time, and also to distribute water to consumers. It allows placing all the necessary equipment, which will be well in harmony with the environment in their small and compact case, and will fit into any difficult interior of the room. Also they are very easily connected to the systems of an internal water supply system by means of a propylene tube that allows to change their sposition in space and to transfer to any place of the room with fast installation of equipment. Also the ecological effect was

Contact Dermatitis In Automobile Repair workers

Directory of Open Access Journals (Sweden)

Joshi M P

1997-01-01

Full Text Available Automobile repair workers are at risk of developing skin morbidity including occupational dermatoses because of their exposure to mineral oils, petroleum products and its derivatives and lubricating oil. This cross- sectional study was carried out at Maharashtra State Road Transport Corporation workshops in Nagpur city to investigate prevalence of skin morbidity including contact dermatitis in automobile repair workers. The study included 288 (49.9% automobile repair workers 180 (31.3% workshop office staff and 109 (18.8% divisional office employees. Dermatitis was the commonest skin morbidity in all the study subjects and it was significantly more prevalent in automobile repair workers. Folliculitis was detected in 13.2% of auto â€" repair workers and was not seen in the other two groups. Increasing trend of skin morbidity was correlated with the length of service of employees. Proper protective measures along with suitable washing facilities should be provided

Loyalty marketing in automobile dealerships : case: car dealer X

OpenAIRE

Hyyryläinen, Heidi

2012-01-01

The purpose of this thesis is to study how customer loyalty is taken into account in automobile dealerships, what loyalty marketing means are used to improve customer loyalty, and what potential new loyalty marketing means can be implemented. The thesis is commissioned by Car dealer X. In the theoretical part, areas covered are customership and loyalty marketing. Customership includes customer satisfaction, customer loyalty, customer value and customer retention. Loyalty marketing contain...

A special purpose knowledge-based face localization method

Science.gov (United States)

Hassanat, Ahmad; Jassim, Sabah

2008-04-01

This paper is concerned with face localization for visual speech recognition (VSR) system. Face detection and localization have got a great deal of attention in the last few years, because it is an essential pre-processing step in many techniques that handle or deal with faces, (e.g. age, face, gender, race and visual speech recognition). We shall present an efficient method for localization human's faces in video images captured on mobile constrained devices, under a wide variation in lighting conditions. We use a multiphase method that may include all or some of the following steps starting with image pre-processing, followed by a special purpose edge detection, then an image refinement step. The output image will be passed through a discrete wavelet decomposition procedure, and the computed LL sub-band at a certain level will be transformed into a binary image that will be scanned by using a special template to select a number of possible candidate locations. Finally, we fuse the scores from the wavelet step with scores determined by color information for the candidate location and employ a form of fuzzy logic to distinguish face from non-face locations. We shall present results of large number of experiments to demonstrate that the proposed face localization method is efficient and achieve high level of accuracy that outperforms existing general-purpose face detection methods.

The challenges of automobile-dependent urban transport strategy

Directory of Open Access Journals (Sweden)

Jovanović Miomir

2015-01-01

Full Text Available The fundamental aims of sustainable urban development and the pro-automobile oriented economic development are on a collision course. It is obvious that automobile-dependent urban development is under heavy/powerful influence of the automobile lobby (automobile and oil industries, along with construction. In this domain famous land-use-transportation studies (or ‘grand transportation studies’ are, unfortunately, still prevailing - a vicious circle of self-fulfilling prophecy of congestion, road building, sprawl, congestion and more road building. Until recently, it was commonly thought that investment in public transport was not economically sustainable and that focusing on the development of the automobile industry and financing the construction of roadways stimulated economic growth. In this paper we clearly show that automobile industry is now overcapitalized, less profitable than many other industries (and may become even less profitable in the future, that transport market is characterized with huge distortions (more than a third of motor-vehicle use can be explained by underpriced driving, while new road investment does not have a major impact on economic growth (especially in a region with an already well-developed infrastructure, and that pro-automobile transport strategy inexorably incurs harmful global, regional and local ecological consequences. [Projekat Ministarstva nauke Republike Srbije, br. 37010

Special-purpose materials for magnetically confined fusion reactors. Third annual progress report

International Nuclear Information System (INIS)

1981-11-01

The scope of Special Purpose Materials covers fusion reactor materials problems other than the first-wall and blanket structural materials, which are under the purview of the ADIP, DAFS, and PMI task groups. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, graphite and SiC, heat-sink materials, ceramics, and materials for high-field (>10-T) superconducting magnets. It is recognized that there will be numerous materials problems that will arise during the design and construction of large magnetic-fusion energy devices such as the Engineering Test Facility (ETF) and Demonstration Reactor (DEMO). Most of these problems will be specific to a particular design or project and are the responsibility of the project, not the Materials and Radiation Effects Branch. Consequently, the Task Group on Special Purpose Materials has limited its concern to crucial and generic materials problems that must be resolved if magnetic-fusion devices are to succeed. Important areas specifically excluded include low-field (8-T) superconductors, fuels for hybrids, and materials for inertial-confinement devices. These areas may be added in the future when funding permits

Can urban rail transit curb automobile energy consumption?

International Nuclear Information System (INIS)

Lin, Boqiang; Du, Zhili

2017-01-01

With the rapid development of China's economy and the speed of urbanization, China's automobile sector has experienced rapid development. The rapid development of the automobile sector has increased energy consumption. According to the results of this paper, automobile energy consumption accounted for about 10.73% of total energy consumption in China in 2015, about 3.6 times the proportion a decade ago. With the deterioration of urban traffic conditions, relying on expanding the amount of vehicles and city road network cannot solve the problem. Urban rail transit is energy-saving and less-polluting, uses less space, has large capacity, and secure. Urban rail transit, according to the principle of sustainable development, is a green transportation system and should be especially adopted for large and medium-sized cities. The paper uses the binary choice model (Probit and Logit) to analyze the main factors influencing the development of rail transit in Chinese cities, and whether automobile energy consumption is the reason for the construction of urban rail transit. Secondly, we analyze the influence of urban rail transit on automobile energy consumption using DID model. The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly, with continuous impact in the second year. - Highlights: • Investigate the main factors influencing the building of rail transit for Chinese cities. • Analyze the influence of urban rail transit on automobile energy consumption by DID model. • The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly.

Promotion Models and Achievements of New-energy Automobiles in Shenzhen

Science.gov (United States)

Cai, Yu; Xiong, Siqin; Bai, Bo; Ma, Xiaoming

2017-08-01

As one of the pilot cities in China for demonstration and promotion of new-energy automobiles, Shenzhen, driven by the “two engines” of the government and the market, has made swift progress in promotion of its new-energy automobiles. This paper analyses Shenzhen’s governmental promotion policy concerning new-energy automobiles, summarizes Shenzhen’s commercial models for promoting new-energy automobiles, and is expected to provide reference for other provinces and cities to promote new-energy automobiles.

Special-purpose interactive programming shell for the open-quotes POLEclose quotes system

International Nuclear Information System (INIS)

Rvachev, V.L.; Kurpa, L.I.

1995-01-01

The development of the theory of R-functions has stimulated the emergence of efficient numerical-analytical methods for a wide class of problems associated with physico-mechanical fields. R-functions are the basis for computer-aided level source language, which is sufficiently close to an ordinary mathematical language. Despite the powerful capabilities of the POLE family systems and the extensive support for the analysis of computation results, these systems are still not widely used in practice, as they assume a user with special mathematical qualifications. It is therefore necessary to develop special-purpose systems that do not require the user to be proficient in mathematical physics, the theory of R-functions, variational methods, etc. In other words, we need systems that are oriented toward technical-profile engineers specializing in design and calculations. In this article, we propose some principles for the construction of a special-purpose interactive programming system POLE-PLAST capable of solving problems in the mechanics of deformable solids of complex shape. As the specific application domain for the description of the system we have chosen problems that deal with bending, stability, and vibration of elements of thin-walled constructions modeled by thin plates

The future role of the automobile in Canada. Le role future de l'automobile au Canada

Energy Technology Data Exchange (ETDEWEB)

Khan, A.M.

1982-03-01

This paper describes the future role of the automobile from an intercity transportation perspective in multimodal contexts; it identifies courses of action open to Transport Canada officials in support of the suggested role. Discussed here is the automobile's multifaceted role, focussing mainly on its use as a mode of door-to-door travel for short trips, a feeder as well as an adjunct to public modes, a means of avoiding excessible public expenditure in highly subsidized public modes (e.g., rail), and a means for providing basic mobility in regional travel contexts. This study goes beyond the 1979 Transport Canada report with the same title by recommending courses of action that might assist officials in formulating policy, planning and other endeavours. At the outset, updated information is provided on the current status and future outlook of selected important factors that affect the future transportation role of the automobile. Against this background, the relevance of major findings of the 1979 automobile report are reviewed and gaps in knowledge identified. On the basis of this information, a future role for the automobile is discussed, with appropriate courses of action recommended. These recommendations and their institutional/program implications are addressed to Transport Canada in the areas of strategic planning and policy, energy planning, safety and coordination of actions/programs with other federal government departments and provincial governments. 48 refs., 8 tabs.

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

OpenAIRE

Sunil Luthra; Vinod Kumar; Sanjay Kumar; Abid Haleem

2011-01-01

Purpose: Green Supply Chain Management (GSCM) has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have ident...

Asbestos-related diseases in automobile mechanics.

Science.gov (United States)

Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

2012-01-01

Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyse the frequency of pleural and parenchymal abnormalities on high-resolution computed tomography (HRCT) in a population of automobile mechanics. The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos-related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers; who in the case of disagreement discussed until they reached agreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Pleural plaques were observed in five cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in one case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers.

41 CFR 102-73.170 - What types of special purpose space may the Department of Agriculture lease?

Science.gov (United States)

2010-07-01

... purpose space may the Department of Agriculture lease? 102-73.170 Section 102-73.170 Public Contracts and... § 102-73.170 What types of special purpose space may the Department of Agriculture lease? The Department of Agriculture is delegated the authority to lease the following types of special purpose space: (a...

Study of CO2 automobile heating system. Paper no. IGEC-1-129

International Nuclear Information System (INIS)

Zha, S.; Hafner, A.

2005-01-01

Carbon dioxide has become a popular working medium in heat pump water heaters and mobile heat pumping systems due to its environment friendliness and its excellent thermal and transport properties in transcritical cycle. It also looks bright as a complete solution to environmental problem associated with automobile air conditionings. As high efficient mobile engines with less waste heat have been developed, extra heating of the passenger compartment is needed in the cold season. In this investigation, three heating solutions for automobile CO 2 air conditioning systems are provided. They are a bypass CO 2 heating cycle, a conventional CO 2 transcritical heat pump cycle and a high capacity heat pump cycle with economizer. These three solutions are compared with the viewpoints of the efficiency and heating capacity. The test results show that the heating capacity of the bypass heating method is only enough for a small automobile although it has the advantage of simple construction and low investment. The heat pump cycle with economizer applying a special construction reciprocating compressor can obtain a highest capacity even in cold climate. But the investment increase for economizer heat pump cycle includes both the modification of the compressor and the flash tank. And the COPh of economizer heat pump cycle is higher than bypass heating cycle, but lower than conventional heat pump cycle due to the highest capacity operation condition. (author)

Kryptonate-based instrumentation development for automobile exhaust pollutants. Phase III report: design and construction of four (4) experimental models

International Nuclear Information System (INIS)

Goodman, P.; Donaghue, T.

This phase of the program encompasses the design, construction and evaluation of four (4) prototype instruments for the detection of automobile exhaust pollutant. These instruments employ the radio release mechanism utilized by Panametrics in detection of various trace gases. The prototype instruments are of two (2) designs. One design is operable from a power source supplied by an automobile battery. The second design is operable from 110 volts AC power. Successful evaluation in the laboratory as well as with various automobiles were performed with both type instruments. Scale-up of the quantity of sensor material prepared introduced unexpected problems with respect to detection lifetime which were not satisfactorily resolved within the time and funds available to the program. Nevertheless, a Kryptonate-based instrument using a single detection method for the measurement of hydrocarbons, CO and NO/sub x/ as pollutants by automobile exhausts was shown to be operable with actual automobile exhausts, to provide more than adequate sensitivity for inspection purposes, and to provide response and recovery times for full scale reading in the range 10-15 secs. (auth)

The construction of a Danish automobile culture

DEFF Research Database (Denmark)

Wagner, Michael

The aim of this article is to discuss the way the automobile was introduced and promoted as a vehicle for modern leisure life in Denmark 1900-1970., and to demonstrate how automobilism was constructed around an ideology of consumption for leisure and recreation....

Indexing, learning and content-based retrieval for special purpose image databases

NARCIS (Netherlands)

M.J. Huiskes (Mark); E.J. Pauwels (Eric)

2005-01-01

textabstractThis chapter deals with content-based image retrieval in special purpose image databases. As image data is amassed ever more effortlessly, building efficient systems for searching and browsing of image databases becomes increasingly urgent. We provide an overview of the current

Nitrosamines in new automobiles

Energy Technology Data Exchange (ETDEWEB)

Fine, D H; Reisch, J; Rounbehler, D P

1980-01-01

The volatile nitrosamines, N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMOR), N-nitrosodiethylamine (NDEA) and possibly N-nitrosodibutylamine (NDBA) have been found to be present as airborne pollutants in the interiors of new (1979 model) automobiles. In the 38 automobiles tested, the levels ranged from 0.07 to 0.83 micrograms/m3 (average 0.3 micrograms/m3) for NDMA, from 0.07 to 2.5 micrograms/m3 (average 0.67 micrograms/m3) for NMOR, from 0.04 to 0.39 micrograms/m3 (average 0.11 micrograms/m3) for NDEA and trace levels (less than 0.01 micrograms/m3) for NDMA.

[Epidemiological features of automobile traumatism in Russia and abroad].

Science.gov (United States)

Iakunin, S A

2007-01-01

The article presents updated epidemiological information on specific features and causes of high automobile traumatism in Russia and abroad for the last 5 years. The number of road accidents and road accident fatalities now not only present a great social-medical problem in Russia but also a problem of national security as road accident mortality is far ahead of the developed countries and showed no trend to lowering. This threatening situation is caused by out-of-date transport infrastructure, social factors, old cars without modern safety systems, absence of special emergency medical care for road accident victims. The experience of foreign countries on reducing road traumatism is analysed.

Special purpose materials for fusion application

International Nuclear Information System (INIS)

Scott, J.L.; Clinard, F.W. Jr.; Wiffen, F.W.

1984-01-01

Originally in 1978 the Special Purpose Materials Task Group was concerned with tritium breeding materials, coolants, tritium barriers, graphite and silicon carbide, ceramics, heat-sink materials, and magnet components. Since then several other task groups have been created, so now the category includes only materials for superconducting magnets and ceramics. For the former application copper-stabilized Nb 3 Sn (Ti) insulated with polyimides will meet the general requirements, so that testing of prototype components is the priority task. Ceramics are required for several critical components of fusion reactors either as dielectrics or as a structural material. Components near the first wall will receive exposures of 5 to 20 MW.year/m"2. Other ceramic applications are well behind the first wall, with lower damage levels. Most insulators operate near room temperature, but ceramic blanket structures may operate up to 1000 0 C. Because of a meager data base, one cannot identify optimum ceramics for structural application; but MgAl 2 O 4 is an attractive dielectric material

How did the Global Financial Crisis Influence the Automobile Industry: Comparison between the US and Japanese Auto Industry

OpenAIRE

SUN, YAN

2013-01-01

The 2008 global financial crisis was the worst one in seventy-five years and had great negative impact on the economy worldwide. Automobile industry, the pillar to the economic development, was hit most by the recession among the sectors. The purpose of this study is to analyze the financial crisis impacts on the automobile industry and find out strategies to decrease the occurrence rate and the loss if a similar crisis occurs. The study, firstly, describes the impact of financial crisis...

SYNTHESIS OF AUTOMOBILE IGNITION SYSTEM USING OZONIZED FUEL

Directory of Open Access Journals (Sweden)

O. M. Pilipenko

2015-01-01

Full Text Available The paper presents a mathematical model for electronic control system of the angular ignition timing (AIT in the (ICE, which is running on ozonized fuel. An algorithm for  ignition system control of internal combustion engine using ozonized fuel has been developed in the paper. A structure of the dynamic ignition system while using a control unit for supplying  ozone into fuel with a purpose to improve automobile ecological and economical indices adapted to operational conditions. Application of the given system allows to ensure minimum reduction of operational petrol consumption and concentration of incomplete combustion products due to optimum ozone dosage into the fuel.  The paper proposes a controlled automobile ignition system as a sequential scheme which has a great number of discrete inputs and outputs and many discrete internal  states. The scheme establishes a functional dependence between input and output states. The paper provides an assessment of ecological indices according to massive emissions of carbon monoxide СО, hydrocarbon СпНт and nitric oxide NOx .  The analysis of  investigations results has been carried out in the paper.

A knowledge-based system for controlling automobile traffic

Science.gov (United States)

Maravas, Alexander; Stengel, Robert F.

1994-01-01

Transportation network capacity variations arising from accidents, roadway maintenance activity, and special events as well as fluctuations in commuters' travel demands complicate traffic management. Artificial intelligence concepts and expert systems can be useful in framing policies for incident detection, congestion anticipation, and optimal traffic management. This paper examines the applicability of intelligent route guidance and control as decision aids for traffic management. Basic requirements for managing traffic are reviewed, concepts for studying traffic flow are introduced, and mathematical models for modeling traffic flow are examined. Measures for quantifying transportation network performance levels are chosen, and surveillance and control strategies are evaluated. It can be concluded that automated decision support holds great promise for aiding the efficient flow of automobile traffic over limited-access roadways, bridges, and tunnels.

Credit constraints, consumer leasing and the automobile replacement decision

OpenAIRE

Kathleen W. Johnson

1999-01-01

This paper presents a model of consumer automobile replacement in the presence of leasing. The model incorporates credit constraints to distinguish between the leasing and purchasing options. It demonstrates how leasing increases the probability that a household replaces its automobile and how households that lease choose higher quality automobiles. The qualitative choice model of the household's decision to lease provides support for the observation that households that lease face credit con...

Trees in urban street canyons and their impact on the dispersion of automobile exhausts

NARCIS (Netherlands)

Gromke, C.B.; Ruck, B.

2007-01-01

The aim of the present study is to clarify the influence of trees on the dispersion of automobile exhausts in urban street canyons. For this purpose, measurements have been performed with a small scale wind tunnel model of an idealized, isolated street canyon with model trees placed along the canyon

Applications for special-purpose minerals at a lunar base

Science.gov (United States)

Ming, Douglas W.

1992-01-01

Maintaining a colony on the Moon will require the use of lunar resources to reduce the number of launches necessary to transport goods from the Earth. It may be possible to alter lunar materials to produce minerals or other materials that can be used for applications in life support systems at a lunar base. For example, mild hydrothermal alteration of lunar basaltic glasses can produce special-purpose minerals (e.g., zeolites, smectites, and tobermorites) that in turn may be used in life support, construction, waste renovation, and chemical processes. Zeolites, smectites, and tobermorites have a number of potential applications at a lunar base. Zeolites are hydrated aluminosilicates of alkali and alkaline earth cations that possess infinite, three-dimensional crystal structures. They are further characterized by an ability to hydrate and dehydrate reversibly and to exchange some of their constituent cations, both without major change of structure. Based on their unique absorption, cation exchange, molecular sieving, and catalytic properties, zeolites may be used as a solid support medium for the growth of plants, as an adsorption medium for separation of various gases (e.g., N2 from O2), as catalysts, as molecular sieves, and as a cation exchanger in sewage-effluent treatment, in radioactive waste disposal, and in pollution control. Smectites are crystalline, hydrated 2:1 layered aluminosilicates that also have the ability to exchange some of their constituent cations. Like zeolites, smectites may be used as an adsorption medium for waste renovation, as adsorption sites for important essential plant growth cations in solid support plant growth mediums (i.e., 'soils'), as cation exchangers, and in other important application. Tobermorites are cystalline, hydrated single-chained layered silicates that have cation-exchange and selectivity properties between those of smectites and most zeolites. Tobermorites may be used as a cement in building lunar base structures, as

Assessment of efficiency of functioning the infocommunication systems a special purpose in the conditions of violation quality of relevance information

Science.gov (United States)

Parinov, A. V.; Korotkikh, L. P.; Desyatov, D. B.; Stepanov, L. V.

2018-03-01

The uniqueness of information processing mechanisms in special-purpose infocommunication systems and the increased interest of intruders lead to an increase in the relevance of the problems associated with their protection. The paper considers the issues of building risk-models for the violation of the relevance and value of information in infocommunication systems for special purposes. Also, special attention is paid to the connection between the qualities of relevance and the value of information obtained as a result of the operation of infocommunication systems for special purposes. Analytical expressions for the risk and damage function in the time range in special-purpose infocommunication systems are obtained, which can serve as a mathematical basis for risk assessment. Further, an analytical expression is obtained to assess the chance of obtaining up-to-date information in the operation of infocommunication systems up to the time the information quality is violated. An analytical expression for estimating the chance can be used to calculate the effectiveness of a special-purpose infocommunication system.

History of automobiles; Jidosha no rekishi

Energy Technology Data Exchange (ETDEWEB)

Iguchi, M. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

2000-01-01

Major automobile production regions moved every-time an innovational automotive technology was invented. When product technology, mass production technology and commercializing technology, product technology for medium and small cars, and lean production technology have emerged in the century, major production regions moved from West Europe to the U.S.,. to revived West Europe again, and Japan joined in the regions successively. A future problem is what technology will change the world distribution of automobile production regions. (author)

Automobile Club CERN

CERN Multimedia

Automobile Club CERN

2010-01-01

 L’Assemblée Générale Ordinaire de «L’Automobile Club du CERN» s’est tenue le mercredi 12 janvier 2010. Le Président, J. Pierlot, souhaite la bienvenue aux membres présents, annonce l’agenda et résume les activités et événements du club pour l’année 2009. Le Club compte environ 600 membres, une petite diminution par rapport aux précédentes années dû surtout aux départs anticipés à la retraite. La cotisation reste inchangée : 50 CHF. Notre trésorier, E. Squadrani, présente de façon détaillée la situation du compte d’exploitation pour 2009 ainsi que le bilan de l’Automobile Club. Les comptes sont équilibrés, la situation de la trés...

Globalization of the automobile industry: traditional locations under pressure?

OpenAIRE

Spatz, Julius; Nunnenkamp, Peter

2004-01-01

Even though the automobile industry is technologically advanced, the increasing integration of low-income countries into the global division of labor has put competitive pressure on traditional automobile producing countries. New end-producers emerged in Asia, Latin America as well as Southern and Central Europe. In addition, the automobile industries of Germany, Japan and the United States engaged in outsourcing of relatively labor intensive segments of the value chain, especially on a regio...

Investigating performance of microchannel evaporators for automobile air conditioning with different port structures

Directory of Open Access Journals (Sweden)

Guoliang Zhou

2017-08-01

Full Text Available Microchannel evaporator has been widely applied in automobile air conditioning, while it faces the problem of refrigerant maldistribution which deteriorates the thermal performance of evaporator. In this study, the performances of microchannel evaporators with different port structures are experimentally investigated for purpose of reducing evaporator pressure drop. Four evaporator samples with different port number and hydraulic diameter are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant R-134A at a real automobile air conditioning. The results on the variations of the evaporator pressure drop and evaporator surface temperature distribution are presented and analyzed. By studying the performance of an evaporator, seeking proper port structure is an approach to reduce refrigerant pressure drop as well as improve refrigerant distribution.

VARIABILITY OF AMYLOSE AND AMYLOPECTIN IN WINTER WHEAT AND SELECTION FOR SPECIAL PURPOSES

Directory of Open Access Journals (Sweden)

Nikolina Weg Krstičević

2015-06-01

Full Text Available The aim of this study was to investigate the variability of amylose and amylopectin in 24 Croatian and six foreign winter wheat varieties and to detect the potential of these varieties for special purposes. Starch composition analysis was based on the separation of amylose and amylopectin and the determination of their amounts and ratios. Analysis of the amount of amylose and amylopectin determined statistically highly significant differences between the varieties. The tested varieties are mostly bread wheat of different quality which have the usual content of amylose and amylopectin. Some varieties were identified among them with high amylopectin and low amylose content and one variety with high amylose content. They have the potential in future breeding programs and selection for special purposes.

Environmental implications of the automobile

International Nuclear Information System (INIS)

1993-01-01

There are over 12 million automobiles in Canada, each travelling over 16,000 km annually. The value of motor vehicles and parts produced in Canada accounts for over 6% of the gross domestic product, and vehicle-related sales account for the largest proportion of Canadian retail activity. The environmental issues related to the high impact of the automobile on Canadian life are discussed. In the manufacture of motor vehicles, over 2 billion kg of metal are used a year; although much of this comes from recycled materials, some depletion of nonrenewable resources is required. It is also estimated that 66-105 GJ of energy are needed to produce a motor vehicle, equivalent to as much as 20% of all the energy consumed during the vehicle's lifetime. Environmental impacts result from this use of resources and energy, including land disturbances and air pollution. Land use impacts are also those related to appropriation of urban and rural land for roadway and service uses, plus pollution of adjoining lands by road runoff. In 1990, the transportation sector used 29% of end-use energy, of which retail gasoline sales for motor vehicles accounted for 54%. Environmental impacts from oil refining, fuel combustion, and waste disposal are described, and programs to mitigate these impacts are outlined. Significant reductions in automobile emissions have already occurred from the increased use of emission control devices, improved fuel efficiency, and stricter standards. Further improvements are possible via such means as better manufacturing procedures, increased recycling of automobile components, better inspection and maintenance, and use of alternative fuels and alternate transportation modes. 35 refs., 3 figs., 4 tabs

Automobile control technology and traffic control

Energy Technology Data Exchange (ETDEWEB)

Takaba, Sadao [Univ. of Tokyo (Japan)

1988-09-05

In the field of automobile control technology, electronic was first adopted for the electronic fuel control as an answer to the exhaust gas regulations. The operations of the driving system, frame system or the automobile itself which is the combination of the two were optimized by adding sensors, computers, actuators, etc. to alleviate the burden of the driver, offering easier drivability and confortableness. For local driving control, measurement of distance up to obstacle has been practiced using the ultrasonic radar sensor. Research and development of microwave radar sensor have been carried out for years. Automatic driving has been a dream technology, and the study for the technology was started since early times. Remarkable progress was made recently in the navigation system for traffic control in wide area. New automobile traffic information communication and other systems are being developed. Historical description is made on the control and information systems for road transportation, dividing the period into the 1st, 2nd and 3rd generations. 10 references.

Effects of automobile battery wastes on physicochemical properties ...

African Journals Online (AJOL)

Difference in soil qualities has been noticeable in many soils due to anthropogenic sources, especially of automobile battery wastes. This study examines the effects of automobile battery wastes on the physicochemical properties of the soil. Soil samples for this study were collected in triplicates from three battery chargers' ...

Modernization of the Russian Automobile Road Network on the Base of Innovative Technologies

Directory of Open Access Journals (Sweden)

E. A. Zhukov

2017-01-01

Full Text Available Purpose: the main goal of the article is to build a conceptual model for the organization of effective functioning of the points of economic and innovative growth of the region in modern conditions, taking into account regional and municipal limitations of internal and external nature, with the aim of ensuring economic security, effective interaction of subjects of the "business-power" system Taking into account the influence of institutional factors. Methods: in the present study the following methods were used: systemic approach, methods of social diagnosis, comparative analysis, method of expert evaluations, and method of statistical processing of information. Results: the short characteristic of modern development and technical level of the Russian automobile roads network as the important part of the automobile roads material-technical base is presented. Realization process of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads is analyzed. The reality of decision this task due to modernization roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction is scientifically proved. Conclusions and Relevance: in spite of losing now in decision of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads, nevertheless the real possibilities to reach the important aim still remain. It may be done only due to scientifically grounded modernization of the roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction 

Environmental practices of the auxiliary companies to the Spanish automobile industry

Science.gov (United States)

González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

2005-11-01

The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

A bivariate model for analyzing recurrent multi-type automobile failures

Science.gov (United States)

Sunethra, A. A.; Sooriyarachchi, M. R.

2017-09-01

The failure mechanism in an automobile can be defined as a system of multi-type recurrent failures where failures can occur due to various multi-type failure modes and these failures are repetitive such that more than one failure can occur from each failure mode. In analysing such automobile failures, both the time and type of the failure serve as response variables. However, these two response variables are highly correlated with each other since the timing of failures has an association with the mode of the failure. When there are more than one correlated response variables, the fitting of a multivariate model is more preferable than separate univariate models. Therefore, a bivariate model of time and type of failure becomes appealing for such automobile failure data. When there are multiple failure observations pertaining to a single automobile, such data cannot be treated as independent data because failure instances of a single automobile are correlated with each other while failures among different automobiles can be treated as independent. Therefore, this study proposes a bivariate model consisting time and type of failure as responses adjusted for correlated data. The proposed model was formulated following the approaches of shared parameter models and random effects models for joining the responses and for representing the correlated data respectively. The proposed model is applied to a sample of automobile failures with three types of failure modes and up to five failure recurrences. The parametric distributions that were suitable for the two responses of time to failure and type of failure were Weibull distribution and multinomial distribution respectively. The proposed bivariate model was programmed in SAS Procedure Proc NLMIXED by user programming appropriate likelihood functions. The performance of the bivariate model was compared with separate univariate models fitted for the two responses and it was identified that better performance is secured by

7 CFR 905.148 - Reports of special purpose shipments under certificates of privilege.

Science.gov (United States)

2010-01-01

... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... Regulations Non-Regulated Fruit § 905.148 Reports of special purpose shipments under certificates of privilege... name and address of the shipper or shippers; name and address of the certified organic Florida citrus...

AUTOMATIC CONTROL SYSTEM OF WINTER AUTOMOBILE-ROAD MAINTENANCE

Directory of Open Access Journals (Sweden)

I. I. Leonovich

2008-01-01

Full Text Available In order to ensure a rational usage of financial and material resources directed on winter automobile-road maintenance in theRepublicofBelarusan automatic control system of winter maintenance is under its development and introduction.  The main purpose of the system is to obtain and use meteorological information on the state of a road network that allows to take necessary organizational and technological solutions ensuring safety and continuity of traffic during winter. This system also presupposes to ensure constant control over the state of roadway covering, expenditure of anti-glazed frost materials at all levels of management.The paper considers main aspects pertaining to introduction of the automatic control system of winter maintenance

37 CFR 201.15 - Special handling of pending claims requiring expedited processing for purposes of litigation.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Special handling of pending... PROVISIONS § 201.15 Special handling of pending claims requiring expedited processing for purposes of... compelling need for the service exists due to pending or prospective litigation, customs matters, or contract...

Shaping the Strength of Cast Rocker Arm for Special Purpose Vehicle

OpenAIRE

Żuczek R.; Pysz S.; Maj M.; Piekło J.

2015-01-01

The article discusses the weldment to casting conversion process of rocker arm designed for operation in a special purpose vehicle to obtain a consistency of objective functions, which assume the reduced weight of component, the reduced maximum effort of material under the impact of service loads achieved through topology modification for optimum strength distribution in the sensitive areas, and the development of rocker arm manufacturing technology. As a result of conducted studies, the unit...

Automobile Tire Assessment: A Multi-Criteria Approach

Directory of Open Access Journals (Sweden)

Ateekh-Ur-Rehman

2017-02-01

Full Text Available In response to the present dynamic market, automobile manufacturing industries are constantly evaluating and improving their manufacturing strategies to stay competitive. It is also evident that they evaluate those strategies considering multiple criteria. In one such case, an automobile project manager has to ensure that the selected tire (among the available alternatives complies with the prospective automobile’s performance. This paper presents an approach for the assessment of alternative automobile tires taking into account multiple criteria, such as tire sustainability, tire road performance, environmental issues, tire purchase cost and tire road grip. The presented approach is quite helpful to any decision maker who is interested not only in ranking alternatives but also in establishing the superiority of an alternative over others. The approach also helps to specify the position of each alternative with respect to ideal solution. A case illustration is used to demonstrate an application of the approach.

Illustrating Newton's Second Law with the Automobile Coast-Down Test.

Science.gov (United States)

Bryan, Ronald A.; And Others

1988-01-01

Describes a run test of automobiles for applying Newton's second law of motion and the concept of power. Explains some automobile thought-experiments and provides the method and data of an actual coast-down test. (YP)

Renewing Marketing Strategy in Kenyan Automobile Industry

OpenAIRE

Kalliokuusi, Miriam

2013-01-01

This thesis studies how to renew existing marketing strategies for case company; in so doing, the thesis fulfills its main objective. Company X, a market leader in the Kenyan automobile sector and has various well-known brands under their corporate umbrella. The automobile industry in Kenya has faced some hardship with steady decline in sales in the last couple of years and Mercedes-Benz as a brand suffered under the circumstances. One major cause of the drop in sales is due to the influx of ...

Technology development for meeting with automobiles negotiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Il [Korea Institute of Machinery and Materials, Seoul (Korea)

2000-06-01

The direction of technology development for meeting with automobiles negotiation is to establish a development and supply policy of automobile with the minimum mileage. Furthermore the development policy of diesel car should be promoted with the same level of gasoline engine emission and a new concept of developing clean diesel engine is needed to achieve this goal. Therefore a smoke-filtering device, developed in Korea, should be promoted for supplying and post-process technology development such as SCR and DeNox catalyzer should be promoted.

Proposal of laser-driven automobile

Science.gov (United States)

Yabe, Takashi; Oozono, Hirokazu; Taniguchi, Kazumoto; Ohkubo, Tomomasa; Miyazaki, Sho; Uchida, Shigeaki; Baasandash, Choijil

2004-09-01

We propose an automobile driven by piston motion, which is driven by water-laser coupling. The automobile can load a solar-pumped fiber laser or can be driven by ground-based lasers. The vehicle is much useful for the use in other planet in which usual combustion engine cannot be used. The piston is in a closed system and then the water will not be exhausted into vacuum. In the preliminary experiment, we succeeded to drive the cylindrical piston of 0.2g (6mm in diameter) on top of water placed inside the acrylic pipe of 8 mm in inner diameter and the laser is incident from the bottom and focused onto the upper part of water by the lens (f=8mm) attached to the bottom edge.

Impact of regional special purpose local option sales tax (SPLOST) initiatives on county infrastructure.

Science.gov (United States)

2011-10-01

In response to fiscal constraints on transportation funding and the need to address transportation problems and create regional solutions, Georgia is proposing a 1% regional Special-Purpose Local-Option Sales Tax (SPLOST). To accommodate this initiat...

Design and simulation of 120 capacity automobile parking control ...

African Journals Online (AJOL)

Design and simulation of 120 capacity automobile parking control system using up/down decade counters. ... leave(s) the parking lot through the exit gate the counter counts down, and the DC motor circuitry drives the entry gate open to allow access for the same number of automobiles that leave(s) the parking lot.

Numerical calculation of the conductivity of percolation clusters and the use of special purpose computers

International Nuclear Information System (INIS)

Herrmann, H.J.

1989-01-01

Electrical conductivity diffusion or phonons, have an anomalous behaviour on percolation clusters at the percolation threshold due to the fractality of these clusters. The results that have been found numerically for this anomalous behaviour are reviewed. A special purpose computer built for this purpose is described and the evaluation of the data from this machine is discussed

Electric accessory drives in automobiles. Elektrische Hilfsantriebe in Kraftfahrzeugen

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

Ten lectures were presented on the conference ''Electric accessory drives in automobiles'' subjects: - Survey on electric accessory drives in automobiles; cooperation of generator, battery and starter; technical solution of accessory drives, considerations on a system; comparison of various solutions for drives by viewing the example of a headlight vertical aim control; wiper motors and their control; blowers for heating, ventilation and air conditioning in automobiles; criteria for dimensioning of blower motors; drives in heating and air-conditioning applicances; permanent magnets for engine excitation; systematic quality assurance of electric accessory drives from car-development to serial production. Numerous illustrations and formulas are supplied which illustrate and explain the lectures. Each lecture is abstracted individually.

GRAPE-5: A Special-Purpose Computer for N-body Simulation

OpenAIRE

Kawai, Atsushi; Fukushige, Toshiyuki; Makino, Junichiro; Taiji, Makoto

1999-01-01

We have developed a special-purpose computer for gravitational many-body simulations, GRAPE-5. GRAPE-5 is the successor of GRAPE-3. Both consist of eight custom pipeline chips (G5 chip and GRAPE chip). The difference between GRAPE-5 and GRAPE-3 are: (1) The G5 chip contains two pipelines operating at 80 MHz, while the GRAPE chip had one at 20 MHz. Thus, the calculation speed of the G5 chip and that of GRAPE-5 board are 8 times faster than that of GRAPE chip and GRAPE-3 board. (2) The GRAPE-5 ...

Pulmonary function in automobile repair workers

Directory of Open Access Journals (Sweden)

Chattopadhyay O

2007-01-01

Full Text Available Background : Automobile repair shop is a place where workers are exposed to harmful chemicals and toxic substances. Objective : To study the occurrence of obstructive and restrictive pulmonary impairment among automobile garage workers. Methods : A cross sectional study involving 151 automobile garage workers from 14 randomly selected garages of urban Kolkata. The study variables were Forced Expiratory Volume in 1 second (FEV 1 , Forced Vital Capacity (FVC, Peak Expiratory Flow Rate (PE FR, age, smoking habit, duration of work, type of work, and respiratory symptoms. The study was analysed using Regression equations, and Chi-square test. Results : All the workers were male. Obstructive impairment was seen in 25.83% of the workers whereas restrictive impairment was seen in 21.19% of the workers. Mixed obstructive and restrictive impairment was seen in 10.6% of the workers. The frequency of obstructive impairment was higher in older workers. In the age group of less than 20 years, 13.6% of the workers had obstructive impairment while 42.86% of workers above 40 years of age had obstructive impairment. Obstructive impairment was more frequently observed in battery repair workers (58.33% and spray painters (37.5% while 16.67% of the body repair workers and 30.19% of the engine mechanics had obstructive impairment. Obstructive impairment was more frequently observed in smokers (53.1 % as compared to ex-smokers (33.3% and non-smokers (6.4%. Obstructive impairment was more frequently observed in workers who had been working for a longer duration. Conclusion: Nearly 36.4% of the automobile garage workers had some form of pulmonary function impairment; obstructive and/or restrictive. The use of personal protective equipment, worker education, and discontinuation of the use of paints containing toxic pigments are recommended.

Treecode with a Special-Purpose Processor

Science.gov (United States)

Makino, Junichiro

1991-08-01

We describe an implementation of the modified Barnes-Hut tree algorithm for a gravitational N-body calculation on a GRAPE (GRAvity PipE) backend processor. GRAPE is a special-purpose computer for N-body calculations. It receives the positions and masses of particles from a host computer and then calculates the gravitational force at each coordinate specified by the host. To use this GRAPE processor with the hierarchical tree algorithm, the host computer must maintain a list of all nodes that exert force on a particle. If we create this list for each particle of the system at each timestep, the number of floating-point operations on the host and that on GRAPE would become comparable, and the increased speed obtained by using GRAPE would be small. In our modified algorithm, we create a list of nodes for many particles. Thus, the amount of the work required of the host is significantly reduced. This algorithm was originally developed by Barnes in order to vectorize the force calculation on a Cyber 205. With this algorithm, the computing time of the force calculation becomes comparable to that of the tree construction, if the GRAPE backend processor is sufficiently fast. The obtained speed-up factor is 30 to 50 for a RISC-based host computer and GRAPE-1A with a peak speed of 240 Mflops.

Automobile characteristics historical data base

Science.gov (United States)

1977-08-01

A collection of data concerning the physical, operating, and performance characteristics of automobiles for the model years 1955, 1960, 1965, 1968, and 1970 to 1974. Data is to be added to the data base already established by DOT/TSC, for the 1975 mo...

Design of special purpose database for credit cooperation bank business processing network system

Science.gov (United States)

Yu, Yongling; Zong, Sisheng; Shi, Jinfa

2011-12-01

With the popularization of e-finance in the city, the construction of e-finance is transfering to the vast rural market, and quickly to develop in depth. Developing the business processing network system suitable for the rural credit cooperative Banks can make business processing conveniently, and have a good application prospect. In this paper, We analyse the necessity of adopting special purpose distributed database in Credit Cooperation Band System, give corresponding distributed database system structure , design the specical purpose database and interface technology . The application in Tongbai Rural Credit Cooperatives has shown that system has better performance and higher efficiency.

77 FR 1501 - Special Purpose Permit Application; Draft Environmental Assessment; Hawaii-Based Shallow-Set...

Science.gov (United States)

2012-01-10

...-FF01M01000] Special Purpose Permit Application; Draft Environmental Assessment; Hawaii-Based Shallow-Set... the operation of the Hawaii-based shallow-set longline fishery that targets swordfish (Xiphias gladius... albatross, by NMFS in its regulation of the shallow-set longline fishery based in Hawaii. This fishery...

77 FR 50153 - Special Purpose Permit Application; Hawaii-Based Shallow-Set Longline Fishery; Final...

Science.gov (United States)

2012-08-20

...-FF01M01000] Special Purpose Permit Application; Hawaii-Based Shallow-Set Longline Fishery; Final... of the Hawaii-based shallow-set longline fishery, which targets swordfish. After evaluating several... take of seabirds in the shallow-set longline fishery based in Hawaii. The analysis of alternatives is...

Technological trends in automobiles.

Science.gov (United States)

Horton, E J; Compton, W D

1984-08-10

Current technological trends in the automotive industry reflect many diverse disciplines. Electronics and microprocessors, new engine transmission concepts, composite and ceramic materials, and computer-aided design and manufacture will combine to make possible the creation of advanced automobiles offering outstanding quality, fuel economy, and performance. A projected "average" vehicle of the 1990's is described to illustrate the application of these new concepts.

The Antecedents of Automobile Brand Loyalty: Evidence from Malaysian

OpenAIRE

Mabkhot, Hashed Ahmed; Salleh, Salniza MD; Shaari, Hasnizam

2016-01-01

This study empirically examined the mediating effect of brand satisfaction on the relationship between brand image and brand loyalty among Malaysian customer toward local automobile brands. Four hypotheses were developed to test hypothesizing relationships among brand image, brand satisfaction on brand loyalty. Data collected from customers of automobile brands in north Malaysia peninsula from three states which were Kedah, Penang, and Perlis. This study applies partial least squares to a sam...

Reducing automobile traffic: an urgent policy for health promotion

Directory of Open Access Journals (Sweden)

Tapia Granados José A.

1998-01-01

Full Text Available In recent decades traffic injuries have become a leading cause of death and disability the world over. In congested urban areas, the noise and emissions from vehicle engines cause discomfort and disease. More than one billion people are exposed daily to harmful levels of atmospheric contamination. Because internal combustion generates carbon dioxide (CO2 , the automobile is a principal contributor to the greenhouse effect, which has significantly raised the temperature of the atmosphere. Scientists anticipate that in coming decades the greenhouse effect will produce alterations in climate that are very likely to be harmful and possibly catastrophic. Meanwhile, burgeoning traffic and rural and urban highway infrastructures are already among the principal causes of environmental degradation. Urban development, because it is nearly always "planned" to accommodate automobiles rather than people, reduces the quality of life and tears the social fabric. In contrast to private automobiles, public transportation, bicycles, and walking produce little environmental contamination or injury-related morbidity and mortality. These modes of transport involve more physical activity, with its positive health effects, and avoid contributing to the greenhouse effect. The reduction of automobile traffic and substitution of alternative modes of transport are essential policies for health promotion. They should be incorporated in "healthy cities" programs and general economic policies.

Intelligent solar-powered automobile-ventilation system

International Nuclear Information System (INIS)

Huang, K. David; Tzeng, S.-C.; Ma Weiping; Wu Mingfung

2005-01-01

This study adopts airflow management technology to improve the local temperature distributions in an automobile to counteract the greenhouse effect. The automobile's temperature can be reduced to almost the outside temperature before the driver or passenger gets into the vehicle. When the engine is idling, the greenhouse-control system can be activated to remove the hot air from the car. An appropriate negative pressure is maintained to prevent stuffiness and save energy. The greenhouse-control system requires electrical power when the engine is idle, and a battery cannot supply sufficient power. An auxiliary solar-power supply can save energy and reduce the greenhouse effect of sunlight, while creating a comfortable traveling environment. It ensures that the engine is not overburdened and increases its service life, conserving energy, protecting the environment and improving comfort

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

Science.gov (United States)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

A special purpose computer for the calculation of the electric conductivity of a random resistor network

International Nuclear Information System (INIS)

Hajjar, Mansour

1987-01-01

The special purpose computer PERCOLA is designed for long numerical simulations on a percolation problem in Statistical Mechanics of disordered media. Our aim is to improve the actual values of the critical exponents characterizing the behaviour of random resistance networks at percolation threshold. The architecture of PERCOLA is based on an efficient iterative algorithm used to compute the electric conductivity of such networks. The calculator has the characteristics of a general purpose 64 bits floating point micro-programmable computer that can run programs for various types of problems with a peak performance of 25 Mflops. This high computing speed is a result of the pipeline architecture based on internal parallelism and separately micro-code controlled units such as: data memories, a micro-code memory, ALUs and multipliers (both WEITEK components), various data paths, a sequencer (ANALOG DEVICES component), address generators and a random number generator. Thus, the special purpose computer runs percolation problem program 10 percent faster than the supercomputer CRAY XMP. (author) [fr

Environmental change and hedonic cost functions for automobiles.

Science.gov (United States)

Berry, S; Kortum, S; Pakes, A

1996-11-12

This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate "hedonic cost functions" that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices.

Environmental change and hedonic cost functions for automobiles

Science.gov (United States)

Berry, Steven; Kortum, Samuel; Pakes, Ariel

1996-01-01

This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate “hedonic cost functions” that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices. PMID:8917486

Trees in urban street canyons and their impact on the dispersion of automobile exhausts

OpenAIRE

Gromke, Christof; Ruck, Bodo

2007-01-01

The aim of the present study is to clarify the influence of trees on the dispersion of automobile exhausts in urban street canyons. For this purpose, measurements have been performed with a small scale wind tunnel model of an idealized, isolated street canyon with model trees placed along the canyon center axis. Sulfur hexafluoride (SF6) was released from a line source embedded in the street surface, simulating vehicle exhaust emissions. The influence of various tree planting arrangements on ...

UTV Expansion Pack - Special-Purpose Rank Revealing Algorithms (version 1.0 for Matlab 6.5)

DEFF Research Database (Denmark)

Fierro, Ricardo D.; Hansen, Per Christian

This collection of Matlab software supplements and complements the package UTV Tools from 1999, and includes implementations of special-purpose rank-revealing algorithms developed since the publication of the original package. We provide algorithms for computing and modifying symmetric rank...

Mind the Gap: The Vicious Circle of Measuring Automobile Fuel Use

DEFF Research Database (Denmark)

Figueroa, Maria; author), L. Schipper (main; Price, L.

1993-01-01

We review the circularity between estimates of automobile use, fuel consumption and fuel intensity. We find that major gaps exist between estimates of road gasoline, the quantity most often used to represent automobile fuel use in economic studies of transport fuel use, and the actual sales data...

Shaping the Strength of Cast Rocker Arm for Special Purpose Vehicle

Directory of Open Access Journals (Sweden)

Żuczek R.

2015-09-01

Full Text Available The article discusses the weldment to casting conversion process of rocker arm designed for operation in a special purpose vehicle to obtain a consistency of objective functions, which assume the reduced weight of component, the reduced maximum effort of material under the impact of service loads achieved through topology modification for optimum strength distribution in the sensitive areas, and the development of rocker arm manufacturing technology. As a result of conducted studies, the unit weight of the item was reduced by 25%, and the stress limit values were reduced to a level guaranteeing safe application.

Essays on Competition and Innovations in the Automobile Markets

OpenAIRE

Leheyda, Nina

2007-01-01

The central focus of my dissertation has been on the investigation of developments towards more competitive and innovative firm behaviour in the global automobile markets. The automobile companies meet each other in many product and geographical markets worldwide. A large proportion of their production is outside of their "home" country. In my work I focus on international most important car markets, namely US, European and German as the most important single European car market and a very in...

Environmental compatibility of automobiles - instruments for the BMW product development process; Automobil-Umweltvertraeglichkeit - neue Instrumente im BMW-Produktentwicklungsprozess

Energy Technology Data Exchange (ETDEWEB)

Franze, H.A.; Neumann, U.; Vornberger, K.; Hoock, R.; Hemberger, R.

1995-09-01

The environmental impact of the automobile and its components is of growing importance not only in public debates but also in the complex decision making process regarding future car concepts. To calculate the environmental compatibility of car components BMW had developed various quantifying instruments and a holistic Life-Cycle Analysis (LCA) approach. The development phase significantly affects the entire life-cycle of a product. Suitable design criteria, recycling requirements and in-house standards have therefore been developed and established. They enable the designer to handle the more and more complex conflicts of technical, economic and ecological objectives during the development process with special view to the customer, i.e. the market. (orig.) [Deutsch] Zur nachhaltigen Verbesserung der Umweltvertraeglichkeit von Automobilen und Bauteilen hat BMW quantitative Instrumente entwickelt: Den `Anforderungskatalog Gesamtfahrzeug`, die BMW-Recycling-Norm, die Demontageanalyse von Automobilen und die lebenszyklusbezogene Bauteil-Bilanzierung. Sie sollen es dem Konstrukteur in der Entwicklungsphase praxisgerecht ermoeglichen, verschiedene Bauteilvarianten oekologisch zu bewerten. Nur so koennen die weiter zunehmenden komplexen Zielkonflike in der Automobilentwicklung, die sowohl technisch-wirtschaftlicher als auch oekonomisch-oekologischer und teilweise gesellschaftspolitischer Natur sind, in Zukunft beherrscht und damit den Markt- und Kundenanforderungen gerecht werden. (orig.)

Automobile Industry Strategic Alliance Partner Selection: The Application of a Hybrid DEA and Grey Theory Model

Directory of Open Access Journals (Sweden)

Chia-Nan Wang

2016-02-01

Full Text Available Finding the right strategic alliance partner is a critical success factor for many enterprises. Therefore, the purpose of this study is to propose an effective approach based on grey theory and data envelopment analysis (DEA for selecting better partners for alliance. This study used grey forecasting to predict future business performances and used DEA for the partner selection of alliances. This research was implemented with realistic public data in four consecutive financial years (2009–2012 of the world’s 20 biggest automobile enterprises. Nissan Motor Co., Ltd was set to be the target decision making unit (DMU. The empirical results showed that, among 19 candidate DMUs, Renault (DMU10 and Daimler (DMU11 were the two feasible beneficial alliance partners for Nissan. Although this research is specifically applied to the automobile industry, the proposed method could also be applied to other manufacturing industries.

What Is the Purpose? Reflections on Inclusion and Special Education from a Capability Perspective

Science.gov (United States)

Reindal, Solveig Magnus

2010-01-01

This article investigated what the capability approach developed by Amartya Sen and Martha Nussbaum can contribute to the issue of inclusion as a new theoretical framework for special education. By posing the question: "What is the purpose of inclusion?", I have proposed to answer this query by investigating how the capability approach is able to…

Atmospheric pollution coming from automobiles and public health

International Nuclear Information System (INIS)

Chiron, M.; Quenel, Ph.; Zmirou, D.

1997-01-01

The air pollution coming from automobile is responsible of different diseases in respiratory or cardiovascular system. epidemiological studies in professional or general media give information in term of public health. If the role of air pollution from automobile at short terms is well established, for effects at long term (such cancers or chronic diseases of respiratory system) the measurement or estimation of the exposure is not sufficient for the moment and makes the epidemiology unable to quantify effects. In spite of these lacks, it is important to reduce the risk for the most fragile people. (N.C.)

JENDL special purpose data files and related nuclear data

International Nuclear Information System (INIS)

Iijima, Shungo

1989-01-01

The objectives of JENDL Special Purpose Data Files under development are the applications of nuclear data to the evaluation of the fuel cycle, nuclear activation, and radiation damage. The files in plan consist of 9 types of data, viz., the actinide cross sections, the decay data, the activation cross sections, the (α,n) cross sections, the photo-reaction cross sections, the dosimetry cross sections, the gas production cross sections, the primary knock-on atom spectra and KERMA factors, and the data for standard. The status of the compilation and the evaluation of these data are briefly reviewed. In particular, the features of the data required for the evaluation of the activation cross sections, (α,n) cross sections, photo-reaction cross sections, and PKA data are discussed in some detail. The need for the realistic definition of the scope of the work is emphasized. (author)

Substance flow analysis and environmental releases of PBDEs in life cycle of automobiles.

Science.gov (United States)

Choi, Jonghyun; Jang, Yong-Chul; Kim, Jong-Guk

2017-01-01

Polybrominated diphenyl ethers (PBDEs), a class of brominated flame retardants, have been widely used in many applications in industry such as automobiles, textiles, and electronics. This study focused on a quantitative substance flow analysis (SFA) of PBDEs in automobiles in order to identify their flow by life cycle and treatment pathways of PBDEs-containing materials in end-of-life vehicles (ELVs) in Korea. In addition, this study has estimated environmental releases of PBDEs in automobiles by life cycle in Korea. During this study, PBDEs were analyzed for the samples collected from several ELVs treatment facilities using X-ray fluorescence and gas chromatography/mass spectrometry (GC/MS) methods. The system boundary for SFA of PBDEs ranged from manufacturing/trade to disposal stage of automobiles by life cycle. Based on the result of the SFA, it was found that the amount of PBDEs in automobiles were the highest in use stage (7748ton/year), followed by production stage (1743ton/year) in 2014. In disposal stage, automobile shredded residues (ASR) and seat fabrics were the main components with relatively high levels of PBDEs in ELVs. The major treatment methods of such components included incineration (84%), energy recovery (9%), and landfilling (6%). This research indicates that PBDEs were emitted the highest amount from interior components during the use stage of automobiles, followed by recycling processes such as dismantling and shredding. This study suggests that PBDEs in ASR and seat fabrics should be properly managed to prevent the widespread dispersion in the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Integrated study for automobile wastes management and ...

African Journals Online (AJOL)

Administrator

Key words: Soil contamination, storm water treatment, emission testing, EPR, heavy metals. INTRODUCTION .... fractionation in soil profiles at automobile mechanic waste ...... The phyto-remediation technique modifies plants to take.

STRATEGIC ENTREPRENEURSHIP: A CASE IN THE BRAZILIAN AUTOMOBILE INDUSTRY

Directory of Open Access Journals (Sweden)

Afonso Carneiro Lima

2010-07-01

Full Text Available This work addresses an entrepreneurial phenomenon of strategic administration within the automobile industry: the creation of the automaker Troller Veículos Especiais (TVE. The case study at hand is justified by the positioning of this company around two market niches and its relative success in an industry characterized by few and powerful players. Our aim was to analyze the entrepreneurial and strategic process of discovering opportunity, the analysis used for internal and external factors, and the adoption of its strategic positioning in exploring two automobile market niches: in the B2B market, vehicles adapted to specific operational functions; and in the B2C, off-road vehicles with a strong appeal to consumers’ life styles. This case study allowed us to visualize the challenging path of a genuinely Brazilian small company in a sector dominated by large multinational groups, besides demonstrating decision-related dilemmas and aspects related to managerial creativity.Key-words: Automobile industry. Case study. Strategic entrepreneurship. Discovery theory. Strategic positioning.

Chery Automobile: Chinese Firms catching up

NARCIS (Netherlands)

Y. Zhang (Ying); S.Y. Yang (Sheng Yun)

2015-01-01

textabstractChery Automobile is a top Chinese car exporter. Due to the global financial crisis, intense competition, and fast technological change, Chery has seen decreasing sales domestically and diminishing opportunities abroad. The carmaker needs to figure out the next stage of strategic

Hinderniserkennung und -verfolgung mit einer PMD-kamera im automobil

Science.gov (United States)

Schamm, Thomas; Vacek, Stefan; Natroshvilli, Koba; Marius Zöllner, J.; Dillmann, Rüdiger

Die Detektion von Hindernissen vor dem Automobil ist eine Hauptanforderung an moderne Fahrerassistenzsysteme (FAS). In dieser Arbeit wird ein System vorgestellt, das mit Hilfe einer PMDKamera (Photomischdetektor) Hindernisse auf der Fahrspur erkennt und deren relevante Parameter bestimmt. Durch die PMD-Kamera werden zunächst 3D-Tiefenbilder der Fahrzeugumwelt generiert. Nach einem initialen Filterprozess werden im Tiefenbild mit Hilfe eines Bereichswachstumsverfahrens Hindernisse gesucht. Zur Stabilisierung des Verfahrens und zur Parameterberechnung wird ein Kaiman Filter eingesetzt. Das Ergebnis ist eine Liste aller Hindernisse im Fahrbereich des Automobils.

Use of powered electric vehicles in automobile fleets. Help elements for decision; Utilisation de vehicules electriques dans les flottes automobiles. Elements d`aide a la decision

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

One of the primary causes of degradation in the quality of urban life is automobile transportation. The introduction of electric vehicles within automobile fleets can help mitigate some of the associated impacts. This guide has assembled a set of technical tools vital to all fleet managers, whether they be with public-sector agencies or companies, who are involved in vehicle-purchasing decisions. It deals with the specific issues related to the use, maintenance and acquisition of electric vehicles. Besides those elements intended to convince both decision-makers and users alike, the automobile fleet manager will find herein, as a conclusion, some examples of comparative economic assessments. These serve to highlight the opportunities available for using electric vehicles in a wide variety of situations. (authors) 18 refs.

Breeding of speciality maize for industrial purposes

OpenAIRE

Pajić Zorica; Radosavljević Milica; Filipović Milomir; Todorović Goran; Srdić Jelena; Pavlov Milovan

2010-01-01

The breeding programme on speciality maize with specific traits was established at the Maize Research Institute, Zemun Polje, several decades ago. The initial material was collected, new methods applying to breeding of speciality maize, i.e. popping maize, sweet maize and white-seeded maize, were introduced. The aim was to enhance and improve variability of the initial material for breeding these three types of maize. Then, inbred lines of good combining abilities were developed and used as c...

Hydrodynamic analysis of floating platform for special purposes under complex water environment

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long

2018-03-01

This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. By using ANSYS AQWA software, the hydrodynamic model of the platform was established. The time history responses of the platform motions and the cable tension forces were calculate under complex water environments, such as wind, wave, current and mooring. The results showed that the tension of the four cables are far less than the breaking tension of the cable, so that the cable will not break. This study can be referenced by the relevant researchers and engineers.

Determination of current loads of floating platform for special purposes

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

2017-08-01

This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. The environmental load calculation of the platform is an important part of the research of the ocean platform, which has always been paid attention to by engineers. In addition to wave loads, the wind loads and current loads are also important environmental factors that affect the dynamic response of the offshore platform. The current loads on the bottom structure should not be ignored. By Fluent software, the hydrostatic conditions and external current loads of the platform were calculated in this paper. The coefficient which is independent of the current velocity, namely, current force coefficient, can be fitted through current loads, which can be used for the consequent hydrodynamic and mooring analyses.

Design of special purpose products made of nanomodified collagen-containing materials with radio-frequency discharge

Science.gov (United States)

Makhotkina, L. Yu; Sharifullin, S. N.

2016-06-01

Research results shows that RF-plasma treatment increases the adhesion of the coating film to the leather uppers and resistance to abrasion and repeated bending of uppers, which define the ability of material to preserve its consumer properties and characterize longer safety of special purpose footwear form during its wearing.

Design of a TFT-LCD Based Digital Automobile Instrument

Directory of Open Access Journals (Sweden)

Yunsong Xu

2014-01-01

instrument and gives an introduction to the sampling circuits and interfaces related to these signals. Following this is the functional categorizing of the circuit modules, such as video buffer circuit, CAN bus interface circuit, and TFT-LCD drive circuit. Additionally, the external EEPROM stores information of the vehicle for history data query, and the external FLASH enables the display of high quality figures. On the whole, the accomplished automobile instrument meets the requirements of automobile instrument markets with its characters of low cost, favorable compatibility, friendly interfaces, and easy upgrading.

The future of languages for special purposes in the era of progressing management

OpenAIRE

Jurin, Suzana

2007-01-01

The authors will give some definitions of the language of special purposes used in multinational business, and they will also describe some characteristics of this language on the morphological level and the level of word-formation. The corpora they are using for this analysis is the corpora found in management reports of German multinational companies. Through this analysis, the authors trace the development of such a language and they observe specific models used in management reports...

Application of Wireless Sensor Networks to Automobiles

Science.gov (United States)

Tavares, Jorge; Velez, Fernando J.; Ferro, João M.

2008-01-01

Some applications of Wireless Sensor Networks (WSNs) to the automobile are identified, and the use of Crossbow MICAz motes operating at 2.4 GHz is considered together with TinyOS support. These WSNs are conceived in order to measure, process and supply to the user diverse types of information during an automobile journey. Examples are acceleration and fuel consumption, identification of incorrect tire pressure, verification of illumination, and evaluation of the vital signals of the driver. A brief survey on WSNs concepts is presented, as well as the way the wireless sensor network itself was developed. Calibration curves were produced which allowed for obtaining luminous intensity and temperature values in the appropriate units. Aspects of the definition of the architecture and the choice/implementation of the protocols are identified. Security aspects are also addressed.

Divorce your car: ending the love affair with the automobile

Energy Technology Data Exchange (ETDEWEB)

Alvord, K.

2000-07-01

This book is a guide for people wishing to liberate themselves from their addiction to cars and the automobile culture. It is a repository of examples and actions that individuals and communities can take to reduce dependence on the automobile. The range of possibilities run from using cars less to not owning one at all. The book provides a humorous yet clear-headed approach to a greener world and maps out the road to how people can live happily ever after by breaking free of 'auto-cracy', without insisting on people in car-dependent countries quit their automotive addiction instantly. Nevertheless, it clearly articulates the connection between automobiles, their arteries (i.e. highways) and effluents (i.e. greenhouse gases and particulate emissions), and the increasing number and severity of natural disasters between the urban renewal and freeway construction that, in the author's view, helped ignite the riots in Watts, Newark and Detroit. The disastrous societal and geophysical effects of the automobile are demonstrated in great abundance, and the mountain of evidence of the systematic abuse of the planet that the book provides is a stunning refutation of the notion that technology is neutral. The automobile is accused of being not only the linchpin of Western and primarily American industrialism and resource extraction, it is also accused of being the chief suspect in a century-long theft of time, conviviality and beauty. How to bring about a change in people's love affair with their cars is difficult to comprehend but this author has a multitude of useful suggestions which seem to suggest that it is possible. There is a list of 104 'selected references' and an extensive list of 'other resources'.

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

Energy Technology Data Exchange (ETDEWEB)

Lin Gan [Center for International Climate and Environmental Research, Oslo (Norway)

2003-05-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analysed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis. (author)

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

Energy Technology Data Exchange (ETDEWEB)

Gan Lin E-mail: lin.gan@cicero.uio.no

2003-05-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis.

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

International Nuclear Information System (INIS)

Gan Lin

2003-01-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis

The inspection of components by X ray in real time in automobile industry

International Nuclear Information System (INIS)

Demandt, K.

1987-01-01

Besides a brief introduction to the state of the art of automobile components inspection by radiography in real time, some examples are discussed. New developments and a possible application for automobile components inspection by x-radiation are discussed. (E.G.) [pt

The effect of airline deregulation on automobile fatalities.

Science.gov (United States)

Bylow, L F; Savage, I

1991-10-01

This paper attempts to quantify the effects of airline deregulation in the United States on intercity automobile travel and consequently on the number of highway fatalities. A demand model is constructed for auto travel, which includes variables representing the price and availability of air service. A reduced form model of the airline market is then estimated. Finding that deregulation has decreased airfares and increased flights, it is estimated that auto travel has been reduced by 2.2% per year on average. Given assumptions on the characteristics of drivers switching modes and the types of roads they drove on, the number of automobile fatalities averted since 1978 is estimated to be in the range 200-300 per year.

Experiences from the exercise ''MERLIN'' for the detection of radioactive substances with the participation of special-purpose vehicles

International Nuclear Information System (INIS)

Griesbach, M.

2009-01-01

Experiences of an exercise with hazardous goods, in particular with radioactive substances (measurements and taking environmental samples) are described. Several special-purpose vehicles with equipment and specially trained crews were used together with radiation protection experts according to the concept of Hesse. It has been the greatest exercise in Hesse with regard to hazardous goods and in particular with regard to ''incidents with radioactive substances''. (orig.)

Automotive History and Development of the Automobile; Automotive Mechanics I: 9043.01.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

The automotive history and development of the automobile course is designed to familiarize the beginning student with basic concepts common to the automobile history and general information that is required for successful advancement in the automotive mechanics field. A course outline is provided and seven pages of post-tests are included in the…

Analysis of CO2, CO and HC emission reduction in automobiles

Science.gov (United States)

Balan, K. N.; Valarmathi, T. N.; Reddy, Mannem Soma Harish; Aravinda Reddy, Gireddy; Sai Srinivas, Jammalamadaka K. M. K.; Vasan

2017-05-01

In the present scenario, the emission from automobiles is becoming a serious problem to the environment. Automobiles, thermal power stations and Industries majorly constitute to the emission of CO2, CO and HC. Though the CO2 available in the atmosphere will be captured by oceans, grasslands; they are not enough to control CO2 present in the atmosphere completely. Also advances in engine and vehicle technology continuously to reduce the emission from engine exhaust are not sufficient to reduce the HC and CO emission. This work concentrates on design, fabrication and analysis to reduce CO2, CO and HC emission from exhaust of automobiles by using molecular sieve 5A of 1.5mm. In this paper, the details of the fabrication, results and discussion about the process are discussed.

Environmental implications of alternative-fueled automobiles: Air quality and greenhouse gas tradeoffs

International Nuclear Information System (INIS)

MaClean, H.L.; Lave, L.B.

2000-01-01

The authors analyze alternative fuel-powerstrain options for internal combustion engine automobiles. Fuel/engine efficiency, energy use, pollutant discharges, and greenhouse gas emissions are estimated for spark and compression ignited, direct injected (DI), and indirect injected (II) engines fueled by conventional and reformulated gasoline, reformulated diesel, compressed natural gas (CNG), and alcohols. Since comparisons of fuels and technologies in dissimilar vehicles are misleading, the authors hold emissions level, range, vehicle size class, and style constant. At present, CNG vehicles have the best exhaust emissions performance while DI diesels have the worst. Compared to a conventional gasoline fueled II automobile, greenhouse gases could be reduced by 40% by a DI CNG automobile and by 25% by a DI diesel. Gasoline- and diesel-fueled automobiles are able to attain long ranges with little weight or fuel economy penalty. CNG vehicles have the highest penalty for increasing range, due to their heavy fuel storage systems, but are the most attractive for a 160-km range. DI engines, particularly diesels, may not be able to meet strict emissions standards, at least not without lowering efficiency

Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

Directory of Open Access Journals (Sweden)

S. M. Chen

2011-01-01

created using hybrid FE-SEA method. The modal density was calculated using analytical method and finite element method; the damping loss factors of the structural and acoustic cavity subsystems were also calculated with analytical method; the coupling loss factors between structure and structure, structure and acoustic cavity were both calculated. Four different kinds of excitations including road excitations, engine mount excitations, sound radiation excitations of the engine, and wind excitations are exerted on the body of automobile when the automobile is running on the road. All the excitations were calculated using virtual prototype technology, computational fluid dynamics (CFD, and experiments realized in the design and development stage. The interior noise of the automobile was predicted and verified at speed of 120 km/h. The predicted and tested overall SPLs of the interior noise were 73.79 and 74.44 dB(A respectively. The comparison results also show that the prediction precision is satisfied, and the effectiveness and reliability of the hybrid FE-SEA model of the automobile is verified.

Topology Explains Why Automobile Sunshades Fold Oddly

Science.gov (United States)

Feist, Curtis; Naimi, Ramin

2009-01-01

Automobile sunshades always fold into an "odd" number of loops. The explanation why involves elementary topology (braid theory and linking number, both explained in detail here with definitions and examples), and an elementary fact from algebra about symmetric group.

Design of Automobile Driveshaft using Carbon/Epoxy and Kevlar/Epoxy Composites

OpenAIRE

R. Srinivasa Moorthy

2013-01-01

Use of advanced composites has resulted in remarkable achievements in many fields including aviation, marine and automobile engineering, medicine, prosthetics and sports, in terms of improved fatigue and corrosion resistances, high specific strength and specific modulus and reduction in energy requirements owing to reduction in weight. The aim of this work is to replace the conventional steel driveshaft of automobiles with an appropriate composite driveshaft. The conventional driveshafts ar...

Evaluation of malodor for automobile air conditioner evaporator by using laboratory-scale test cooling bench.

Science.gov (United States)

Kim, Kyung Hwan; Kim, Sun Hwa; Jung, Young Rim; Kim, Man Goo

2008-09-12

As one of the measures to improve the environment in an automobile, malodor caused by the automobile air-conditioning system evaporator was evaluated and analyzed using laboratory-scale test cooling bench. The odor was simulated with an evaporator test cooling bench equipped with an airflow controller, air temperature and relative humidity controller. To simulate the same odor characteristics that occur from automobiles, one previously used automobile air conditioner evaporator associated with unpleasant odors was selected. The odor was evaluated by trained panels and collected with aluminum polyester bags. Collected samples were analyzed by thermal desorption into a cryotrap and subsequent gas chromatographic separation, followed by simultaneous olfactometry, flame ionization detector and identified by atomic emission detection and mass spectrometry. Compounds such as alcohols, aldehydes, and organic acids were identified as responsible odor-active compounds. Gas chromatography/flame ionization detection/olfactometry combined sensory method with instrumental analysis was very effective as an odor evaluation method in an automobile air-conditioning system evaporator.

Data-Driven Neural Network Model for Robust Reconstruction of Automobile Casting

Science.gov (United States)

Lin, Jinhua; Wang, Yanjie; Li, Xin; Wang, Lu

2017-09-01

In computer vision system, it is a challenging task to robustly reconstruct complex 3D geometries of automobile castings. However, 3D scanning data is usually interfered by noises, the scanning resolution is low, these effects normally lead to incomplete matching and drift phenomenon. In order to solve these problems, a data-driven local geometric learning model is proposed to achieve robust reconstruction of automobile casting. In order to relieve the interference of sensor noise and to be compatible with incomplete scanning data, a 3D convolution neural network is established to match the local geometric features of automobile casting. The proposed neural network combines the geometric feature representation with the correlation metric function to robustly match the local correspondence. We use the truncated distance field(TDF) around the key point to represent the 3D surface of casting geometry, so that the model can be directly embedded into the 3D space to learn the geometric feature representation; Finally, the training labels is automatically generated for depth learning based on the existing RGB-D reconstruction algorithm, which accesses to the same global key matching descriptor. The experimental results show that the matching accuracy of our network is 92.2% for automobile castings, the closed loop rate is about 74.0% when the matching tolerance threshold τ is 0.2. The matching descriptors performed well and retained 81.6% matching accuracy at 95% closed loop. For the sparse geometric castings with initial matching failure, the 3D matching object can be reconstructed robustly by training the key descriptors. Our method performs 3D reconstruction robustly for complex automobile castings.

Application of Chemometric Techniques to Colorimetric Data in Classifying Automobile Paint

International Nuclear Information System (INIS)

Nur Awatif Rosli; Rozita Osman; Norashikin Saim; Mohd Zuli Jaafar

2015-01-01

The analysis of paint chips is of great interest to forensic investigators, particularly in the examination of hit-and run cases. This study proposes a direct and rapid method in classifying automobile paint samples based on colorimetric data sets; absorption value, reflectance value, luminosity value (L), degree of redness (a) and degree of yellowness (b) obtained from video spectral comparator (VSC) technique. A total of 42 automobile paint samples from 7 manufacturers were analysed. The colorimetric datasets obtained from VSC analysis were subjected to chemometric technique namely cluster analysis (CA) and principal component analysis (PCA). Based on CA, 5 clusters were generated; Cluster 1 consisted of silver color, cluster 2 consisted of white color, cluster 3 consisted of blue and black colors, cluster 4 consisted of red color and cluster 5 consisted of light blue color. PCA resulted in two latent factors explaining 95.58 % of the total variance, enabled to group the 42 automobile paints into five groups. Chemometric application on colorimetric datasets provide meaningful classification of automobile paints based on their tone colour (L, a, b) and light intensity These approaches have the potential to ease the interpretation of complex spectral data involving a large number of comparisons. (author)

Hydrogen: implications for the future automobile

International Nuclear Information System (INIS)

Frise, P. R.; Woodward, W.

2004-01-01

'Full text:' The presentation will focus upon the challenges within the automotive manufacturing industry related to the hydrogen fuelled automobile of the future. Challenges and opportunities include issues of power train design and packaging as well as on-road performance capabilities, fuel system packaging and materials for body structures. Due to the size and complexity of the automotive sector, technology changes tend to be evolutionary rather than revolutionary, but changes are being made to today's cars in preparation for the evolution toward the future hydrogen automobile. Real world applications of new technologies will be described that are assisting automakers to prepare for the hydrogen future today. The work will be described in the context of AUTO21, a national Network of Centres of Excellence (NCE), is helping to position Canada as a leader in automotive research and development. More than 250 researchers in 34 Canadian universities and over 110 industry and government partners contribute to AUTO21 through applied research projects in six themes of study ranging from health and societal issues to pure engineering applications. (author)

New perspectives for advanced automobile diesel engines

Science.gov (United States)

Tozzi, L.; Sekar, R.; Kamo, R.; Wood, J. C.

1983-01-01

Computer simulation results are presented for advanced automobile diesel engine performance. Four critical factors for performance enhancement were identified: (1) part load preheating and exhaust gas energy recovery, (2) fast heat release combustion process, (3) reduction in friction, and (4) air handling system efficiency. Four different technology levels were considered in the analysis. Simulation results are compared in terms of brake specific fuel consumption and vehicle fuel economy in km/liter (miles per gallon). Major critical performance sensitivity areas are: (1) combustion process, (2) expander and compressor efficiency, and (3) part load preheating and compound system. When compared to the state of the art direct injection, cooled, automobile diesel engine, the advanced adiabatic compound engine concept showed the unique potential of doubling the fuel economy. Other important performance criteria such as acceleration, emissions, reliability, durability and multifuel capability are comparable to or better than current passenger car diesel engines.

Selection and optimization of mooring cables on floating platform for special purposes

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

2017-08-01

This paper studied a new type of assembled marine floating platform for special purposes. The selection and optimization of mooring cables on the floating platform are studied. By using ANSYS AQWA software, the hydrodynamic model of the platform was established to calculate the time history response of the platform motion under complex water environments, such as wind, wave, current and mooring. On this basis, motion response and cable tension were calculated with different cable mooring states under the designed environmental load. Finally, the best mooring scheme to meet the cable strength requirements was proposed, which can lower the motion amplitude of the platform effectively.

The System Dynamics of U.S. Automobile Fuel Economy

Directory of Open Access Journals (Sweden)

Todd K. BenDor

2012-05-01

Full Text Available This paper analyzes the dynamics of U.S. automobile gasoline consumption since 1975. Using background literature on the history of domestic fuel economy and energy policy, I establish a conceptual model that explains historical trends in adoption of increased fuel economy. I then create a system dynamics simulation model to understand the relationship between increased fuel economy standards and potential changes to gas tax policies. The model suggests that when increases in mandated fuel economy are not conducted in an environment with rising fuel costs, fuel economy improvements may be directly counteracted by shifting tastes of consumers towards larger automobiles with lower fuel economy.

The automobile after tomorrow

Energy Technology Data Exchange (ETDEWEB)

Guzzella, L [Swiss Federal Inst. of Technology (ETH), Zurich (Switzerland)

1996-11-01

This talk discusses the technical options available for automobiles within the next 5 to 10 years. With the objective to reduce consumption and pollution, several alternative approaches are presented and analyzed using simplified but realistic calculations. Main emphasis is laid on CO{sub 2} emission of the complete energy transformation path from the primary energy carrier to the energy dissipated in test cycles. It is shown that no single optimal solution exist but that a trade-off between consumption, pollution and cost must be made for each specific situation. (author) 17 figs., 2 tabs.

Research on the Bionics Design of Automobile Styling Based on the Form Gene

Science.gov (United States)

Aili, Zhao; Long, Jiang

2017-09-01

From the heritage of form gene point of view, this thesis has analyzed the gene make-up, cultural inheritance and aesthetic features in the evolution and development of forms of brand automobiles and proposed the bionic design concept and methods in the automobile styling design. And this innovative method must be based on the form gene, and the consistency and combination of form element must be maintained during the design. Taking the design of Maserati as an example, the thesis will show you the design method and philosophy in the aspects of form gene expression and bionic design innovation for the future automobile styling.

Spatial distribution and landuse planning of informal automobile ...

African Journals Online (AJOL)

Spatial distribution and landuse planning of informal automobile workshops in Osogbo, ... data pertaining to the activities and other related issues of their workshops. ... The study therefore, recommends the establishment of mechanic complex, ...

Prelaunch Forecasting of New Automobiles

OpenAIRE

Glen L. Urban; John R. Hauser; John H. Roberts

1990-01-01

This paper develops and applies a prelaunch model and measurement system to the marketing planning of a new automobile. The analysis addresses active search by consumers, dealer visits, word-of-mouth communication, magazine reviews, and production constraints---issues that are important in understanding consumer response to durable goods. We address these issues with a detailed consumer flow model which monitors and projects key consumer transitions in response to marketing actions. A test-vs...

SPECIAL PURPOSE SHOCK TUBE for BLAST ASSESSMENT

Data.gov (United States)

Federal Laboratory Consortium — This device is a specially designed shock tube for testing fabric samples in a controlled environment. The device determines the appropriate types of sensors to be...

A new method for controlling refrigerant flow in automobile air conditioning

Energy Technology Data Exchange (ETDEWEB)

Xuquan Li; Jiangping Chen; Zhijiu Chen [Shanghai Jiao Tong University (China). Institute of Refrigeration and Cryogenics Engineering; Weihua Liu; Wei Hu; Xiaobing Liu [Shanghai Delphi Automotive Air Conditiong Systems Co. Ltd., Changhai (China)

2004-05-01

This paper describes the improvement of the refrigerant flow control method by using an electronic expansion valve (EEV) which is driven by a stepper motor in automobile air conditioning system. An EEV can make a quick response to the abrupt change in the refrigerant flow rate during the change in automobile speed and the thermostatic on/off operation. The flow rate characteristic of the EEV for automobile air conditioning was presented. A microcontroller is used to receive the input signal and generate the output signal to control the opening of the EEV. The fuzzy self-tuning proportional-integral-derivative (PID) control method is employed. Experimental results show that the new control method can feed adequate refrigerant flow into the evaporator in various operations. The evaporator discharge air temperature has dropped by approximately 3{sup o}C as compared with that of the conventional PID control system. (author)

A Tractor or an Automobile? A 1920s Farm Family Faces a Decision.

Science.gov (United States)

Kunze, Joel P.

1991-01-01

Outlines a lesson plan in which students role play a 1920s farm family deciding whether to buy an automobile or a tractor. Other students act as automobile and tractor sales groups. Explains how the lesson illuminates relationships between technological advance and social history. Includes handouts identifying benefits of purchasing cars or…

Personal characteristics of a law enforcement unit of special purpose

Directory of Open Access Journals (Sweden)

Vasilenko T.G.

2017-07-01

Full Text Available The relevance of the study of the personal characteristics of law enforcement officers due to a significant number of crimes of an aggressive nature, committed by employees of internal Affairs bodies, and the need to develop preventive measures. The purpose of this research is to study peculiarities of the manifestation of progressive and inhibiting aggression personality factors in the structure of law enforcement officers, whose activities directly associated with aggression in the performance of official duties. The study involved 149 employees of special forces of law enforcement are male aged 18 to 35 years. Used a wide battery of psychodiagnostic methods aimed at a comprehensive study of the individual respondents. the data Obtained were analyzed using the method of correlation pleiades. According to the results, was discovered a unique picture of the relationship among personality structures and interaction progressive and deterrent aggression factors with the prevalence of progressive on inhibitory factors in the studied structure.

Designing carbon taxation schemes for automobiles: A simulation exercise for Germany

OpenAIRE

Adamou, Adamos; Clerides, Sofronis; Zachariadis, Theodoros

2011-01-01

Vehicle taxation based on CO2 emissions is increasingly being adopted worldwide in order to shift consumer purchases to low-carbon cars, yet little is known about the effectiveness and overall economic impact of these schemes. We focus on feebate schemes, which impose a fee on high-carbon vehicles and give a rebate to purchasers of low-carbon automobiles. We estimate a discrete choice model of demand for automobiles in Germany and simulate the impact of alternative feebate schemes on emission...

Hierarchical functional model for automobile development; Jidosha kaihatsu no tame no kaisogata kino model

Energy Technology Data Exchange (ETDEWEB)

Sumida, S [U-shin Ltd., Tokyo (Japan); Nagamatsu, M; Maruyama, K [Hokkaido Institute of Technology, Sapporo (Japan); Hiramatsu, S [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

A new approach on modeling is put forward in order to compose the virtual prototype which is indispensable for fully computer integrated concurrent development of automobile product. A basic concept of the hierarchical functional model is proposed as the concrete form of this new modeling technology. This model is used mainly for explaining and simulating functions and efficiencies of both the parts and the total product of automobile. All engineers who engage themselves in design and development of automobile can collaborate with one another using this model. Some application examples are shown, and usefulness of this model is demonstrated. 5 refs., 5 figs.

High energy X-ray CT system using a linear accelerator for automobile parts inspection

International Nuclear Information System (INIS)

Kanamori, T.; Sukita, T.

1995-01-01

A high energy X-ray CT system (maximum photon energy: 0.95 MeV) has been developed for industrial use. This system employs a linear accelerator as an X-ray source. It is able to image the cross section of automobile parts and can be applied to a solidification analysis study of the cylinder head in an automobile. This paper describes the features of the system and application results which can be related to solidification analysis of the cylinder head when fabricated from an aluminum casting. Some cross-sectional images are also presented as evidence for nondestructive inspection of automobile parts. (orig.)

Automobile industry and globalization in Asian market; Asia ni okeru jidosha sangyo to globalization

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

Asian countries are now attracting attention of automobile manufacturers of the world for their capabilities of buying, producing, and assembling of automobiles, and producing and supplying of parts, which means that the Asian market is now exposed to globalization. As for the automobile and part manufacturers of Japan, in the presence of economic depression lingering in Asia affecting motorization and rapid changes in the circumstances Japan`s automobile industry finds itself under, are pressed to work out new strategies as a member of the Asian community. A panel discussion of the same name as the subject held in 1997 won favor as a fine initiative to suitably cope with the difficult situation. Useful suggestions and proposals were made concerning the panel discussion, calling the event a new type of round-table talks well responding to the rapid changes in the world economy since 1997, by learned and experienced people, the government offices concerned, staffers of manufacturers in charge of overseas marketing, and international information analysts. They related to the current state and tasks of automobile manufacturing in Asia, trends of regulations and standardization, rolls of technical assistance and the Society of Automotive Engineers of Japan, Ltd., expressed from a wide angle covering various problems relative to environmental protection, safety, etc. (NEDO)

Automobile technology of the future

International Nuclear Information System (INIS)

Seiffert, U.; Walzer, P.

1990-01-01

Looking ahead to the year 2000, this fascinating publication takes an in-depth look at new technology which will impact the passenger car of tomorrow. New developments in the areas of performance, reliability, comfort, fuel economy, safety, and environmental compatibility are examined. In this book the authors offer analysis on subjects such as the impact of legislation, the acceptance of ABS, and features of the future dashboard. Offering insight to readers with both technical and general interest in automobiles

Fatigue analysis of assembled marine floating platform for special purposes under complex water environments

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long

2018-03-01

In this paper, the fatigue lives of a new type of assembled marine floating platform for special purposes were studied. Firstly, by using ANSYS AQWA software, the hydrodynamic model of the platform was established. Secondly, the structural stresses under alternating change loads were calculated under complex water environments, such as wind, wave, current and ice. The minimum fatigue lives were obtained under different working conditions. The analysis results showed that the fatigue life of the platform structure can meet the requirements

Globalization of the automobile industry in China. Dynamics and barriers in the greening of road transportation

Energy Technology Data Exchange (ETDEWEB)

Gan, Lin

2001-08-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of the automobile in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policy making and transport management. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems and stronger emissions control would be relevant to China's drive toward sustainable transportation development. (author)

Ergonomic study of biorhythm effect on the 62 occurrence of human errors and accidents in automobile manufacturing industry

OpenAIRE

2012-01-01

Background and Aim: According to the biorhythm theory when the phase shift from positive to negative and vice versa people experience a critical an unstable day that prone them to error and accident. The purpose of this study is to determine this relationship in one of the automobile manufacturing industry. . Materials and Methods: At first 1280 person incident entered the study was reviewed and then the critical days of each biological cycle was determined using the software Easy Biorh...

Nuclear data libraries for gamma analysis programs, including special purpose libraries

International Nuclear Information System (INIS)

Westmeier, W.; Reus, U.; Siemon, K.; Westmeier, H.

2002-01-01

A complete set of gamma ray and other data relating to the decay of all known nuclides has been compiled from the literature and electronic sources. The data were critically reviewed, evaluated and the consistency was checked. The total catalogue is comprised of data-sets for 3841 nuclides and isomers with 106,355 gamma ray and 19,347 X ray entries. A subset of 1,627 nuclides with 32,456 gamma ray entries is extracted into a database, which provides the basis for the generation of nuclide libraries for the application in spectrometry programmes. The WINDOWS based program NUC M AN was developed which serves for the updating and editing of the database as well as the generation of task-specific user libraries for special purposes. The literature cut-off date for this catalogue is January 1, 1998. (author)

UNICEF and automobile CO2 negotiation

Energy Technology Data Exchange (ETDEWEB)

Woo, Seok Hun [Korea Energy Management Corporation, Yongin (Korea)

2000-06-01

The EU automobile negotiation was very suggestive since it was the first international trade negotiation related with UNFCCC. It generated considerable reactions in association with {sup v}oluntary negotiation{sup i}n semiconductor sector. Most of all, such a new car negotiation shows well that it is hard to free from global environmental responsibilities even for a company in a developing country in UNFCCC.

CHINESE AUTOMOBILE ENTERPRISE STRATEGY ANALYSIS

OpenAIRE

Phd. Candidate Mrs. Chai Feng xia

2015-01-01

China's auto industry also had a golden decade of explosive growth. In 2009, China's auto market has exceeded the United States, the wo rld's largest car market, and in 2013, China's auto production both breaks t hrough twenty million. However, through the presentation of China's auto m arket booming, we should be acutely aware that the status of China's automobile industry in the global automotive industry value chain is still very low, this paper did analysis regarding the current situation...

Concept and ripple effect of negotiation for automobile CO{sub 2} emission regulation

Energy Technology Data Exchange (ETDEWEB)

Han, Hwa Jin [Korea Environment Institute, Seoul (Korea)

2000-06-01

The present average of automobile CO{sub 2} emission in Korea is about 220g/km, so it is hard to achieve reduction goal concluded with EU with present technology capability. In such a situation, it is required a long-term R and D strategy on direct jet engine, hybrid engine, diesel automobile development and other mileage improving technology which need huge initial investment cost. Furthermore, the efforts on alternative fuel automobile technology are needed. When a long-term strategy of corporation and a competitiveness policy of government are integrated properly, then it is possible to establish two goals, environmental protection and maintenance of industrial competitiveness, simultaneously. However, the emission reduction goal that is proposed by EU is still too high to achieve for Korean companies.

Preliminary research on virtual thermal comfort of automobile occupants

Science.gov (United States)

Horobet, Tiberiu; Danca, Paul; Nastase, Ilinca; Bode, Florin

2018-02-01

Numerical simulation of climate conditions in automotive industry for the study of thermal comfort had become more and more prominent in the last years compared with the classical approach which consists in wind tunnel measurements and field testing, the main advantages being the reduction of vehicle development time and costs. The study presented in this paper is a part of a project intended to evaluate different strategies of cabin ventilation for improving the thermal comfort inside vehicles. A virtual thermal manikin consisting of 24 parts was introduced on the driver seat in a vehicle. A heat load calculated for summer condition in the city of Cluj-Napoca, Romania was imposed as boundary condition. The purpose of this study was to elaborate a virtual thermal manikin suitable for our research, introduction of the manikin inside the vehicle and to examine his influence inside the automobile. The thermal comfort of the virtual manikin was evaluated in terms of temperature and air velocity.

Kinetic considerations of three-way catalysis in automobile exhaust converters

International Nuclear Information System (INIS)

Botas, J.A.; Gutierrez-Ortiz, M.A.; Gonzalez-Marcos, M.P.; Gonzalez-Marcos, J.A.; Gonzalez-Velasco, J.R.

2001-01-01

The activity of three-way catalysts is highly dependent on the reactants present in the automobile exhaust gases (CO, NO x , HC, O 2 , H 2 O, CO 2 , N 2 ) as well as their relative concentration. Thus, the influence of each reactant on the kinetic behavior of the whole mixture makes difficult to establish the accurate kinetics of the system. Activity experiments carried out close to the real operation conditions (GHSV, concentration, etc.) with a Pt/CeO 2 /Al 2 O 3 catalyst supplied data on the CO and HC oxidation and NO reduction reactions in environments formed by different reactant combinations (from binary mixtures to the whole mixture simulating the real conditions at the automobile converter).The obtained results have shown notable variations in the oxidation/reduction mechanisms depending on the presence (or absence) of components in the environment. The presence of water always promoted the three-way activity of the catalyst. The compensation effect applied to the CO, NO and HC conversions confirmed that kinetic expressions obtained with partial mixtures (not very close to the real converter environment) have only limited application for determining the whole kinetic scheme occurring in the automobile converters

From Rail-Oriented to Automobile-Oriented Urban Development and Back. 100 Years of Paradigm Change and Transport Policy in Berlin

Directory of Open Access Journals (Sweden)

Friedemann Kunst

2016-10-01

Full Text Available Transport and its side effects are major problems in rapidly growing cities. Car traffic dominates these cities and pollutes the environment without being able to sufficiently secure the mobility of the urban population and goods. A paradigm shift in urban and transport policy will be necessary to change this situation. In spite of its different development dynamics, Berlin is an interesting example to discuss development strategies for rapidly growing cities because in the course of more than 100 years, a twofold paradigm shift has occurred in the city both conceptually and practically:  Berlin has shifted from a city dominated by rail traffic  to an automobile-oriented city,  and has then gradually transformed back into a city in which  an intertwined system of public and non-motorized individual means of transport secures the mobility of the urban population. The interdependencies on the conceptual level between urban planning and transport policies as well as on a practical level between urban structures and transport systems can be studied using the example of Berlin. Experiences with the implementation of automobile-oriented planning and the special conditions in the first decade after reunification led to protests, reflection, and a revision of the transport policy. A strategically designed process of integrated planning has brought about a trend reversal, and steered the development of transport in the direction of clearly formulated sustainability-oriented objectives. In this process, the reintegration of transport and spatial planning and a reorganization of institutional structures at the administrative level was of particular importance. Compact, rail-oriented settlement structures like in the metropolitan region of Berlin make it easier to dispense with automobiles than sprawled structures. The residual role that qualitatively improved automobiles will take in the cities of the future will have to be determined by research and

Evaluation of Inhibitors Blends Used in Iraqi Markets for Automobile Cooling System

Directory of Open Access Journals (Sweden)

Watheq Naser Hussein

2017-08-01

Full Text Available Detection the behavior of some metals ( carbon steel and copper that are widely used in automobiles cooling system in tap water and a cooling mixture for radiators was held. The purpose of this work is to check the performance of two types of mixtures that available in Iraqi markets, viz the Kuwait mixture and the Germany one and what are known as blue water by an electrochemical technique. The experiments were held at two values of temperatures of 17 and 80 ˚C-where these values of temperature almost represent the cases of idle and operating engine. The obtained results showed that the two types of mixtures have given good inhibition efficiency for the case of steel especially in presence of Germany mixture.

Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

Energy Technology Data Exchange (ETDEWEB)

Kilic, M.; Akyol, S.M. [Uludag University, Department of Mechanical Engineering, Faculty of Engineering and Architecture, Bursa (Turkey)

2012-08-15

The air quality and thermal comfort strongly influenced by the heat and mass transfer take place together in an automobile cabin. In this study, it is aimed to investigate and assess the effects of air intake settings (recirculation and fresh air) on the thermal comfort, air quality satisfaction and energy usage during the cooling period of an automobile cabin. For this purpose, measurements (temperature, air velocity, CO{sub 2}) were performed at various locations inside the cabin. Furthermore, whole body and local responses of the human subjects were noted while skin temperatures were measured. A mathematical model was arranged in order to estimate CO{sub 2} concentration and energy usage inside the vehicle cabin and verified with experimental data. It is shown that CO{sub 2} level inside of the cabin can be greater than the threshold value recommended for the driving safety if two and more occupants exist in the car. It is also shown that an advanced climate control system may satisfy the requirements for the air quality and thermal comfort as well as to reduce the energy usage for the cooling of a vehicle cabin. (orig.)

Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

Science.gov (United States)

Kilic, M.; Akyol, S. M.

2012-08-01

The air quality and thermal comfort strongly influenced by the heat and mass transfer take place together in an automobile cabin. In this study, it is aimed to investigate and assess the effects of air intake settings (recirculation and fresh air) on the thermal comfort, air quality satisfaction and energy usage during the cooling period of an automobile cabin. For this purpose, measurements (temperature, air velocity, CO2) were performed at various locations inside the cabin. Furthermore, whole body and local responses of the human subjects were noted while skin temperatures were measured. A mathematical model was arranged in order to estimate CO2 concentration and energy usage inside the vehicle cabin and verified with experimental data. It is shown that CO2 level inside of the cabin can be greater than the threshold value recommended for the driving safety if two and more occupants exist in the car. It is also shown that an advanced climate control system may satisfy the requirements for the air quality and thermal comfort as well as to reduce the energy usage for the cooling of a vehicle cabin.

Modern steels for light automobiles (review)

Science.gov (United States)

Tikhonov, A. K.

1994-10-01

The article considers the directions of work at VAZ together with metallurgists of the CIS for creating highly efficient economically-alloyed and microalloyed steels; highly ductile forged steels with improved corrosion resistance coated with zinc and with good stamping, welding, and painting capacity. Steels are created for petrol tanks with aluminum-zinc coatings instead of lead, and new heat and corrosion-resistant steels are developed for automobile exhaust gas systems.

Daredevils and early birds: Belgian pioneers in automobile racing and aerial sports during the belle époque.

Science.gov (United States)

Ameye, Thomas; Gils, Bieke; Delheye, Pascal

2011-01-01

During the belle époque, Belgium was a trend-setting nation in many domains, including motorised sports. Belgian automobile racers and pilots shattered world records and became international stars. Striking was the shift in sports. Indeed, around 1896, sporting members of the leisure class stepped from the bicycle into the automobile and, around 1908, from the automobile into the airplane. Although these motorised sports were extremely expensive, this article shows that sportsmen and sportswomen from the working class could achieve upward social mobility through their performances. The achievements of these motorised pioneers had a major impact and wide-ranging significance. They laid the foundations for the expansion of the automobile industry and the emergence of civilian and military aviation.

Managing bottlenecks in manual automobile assembly systems using discrete event simulation

Directory of Open Access Journals (Sweden)

Dewa, M.

2013-08-01

Full Text Available Batch model lines are quite handy when the demand for each product is moderate. However, they are characterised by high work-in-progress inventories, lost production time when changing over models, and reduced flexibility when it comes to altering production rates as product demand changes. On the other hand, mixed model lines can offer reduced work-in-progress inventory and increased flexibility. The object of this paper is to illustrate that a manual automobile assembling system can be optimised through managing bottlenecks by ensuring high workstation utilisation, reducing queue lengths before stations and reducing station downtime. A case study from the automobile industry is used for data collection. A model is developed through the use of simulation software. The model is then verified and validated before a detailed bottleneck analysis is conducted. An operational strategy is then proposed for optimal bottleneck management. Although the paper focuses on improving automobile assembly systems in batch mode, the methodology can also be applied in single model manual and automated production lines.

THE ROLE OF AUTOMOBILE TRANSPORT IN HUBS SERVICE

Directory of Open Access Journals (Sweden)

Kirill Iurievich Bely

2015-09-01

Full Text Available Article contains approaches to development and functioning of transport-logistic nodes – hubs – in modern conditions. There is hub classification and examples of them on different transport modes. An important component in providing reliability of hub work is automobile transport.

Aspects économiques de l'industrie automobile dans le monde Economic Aspects of the Auto-Motive Industry in the World

Directory of Open Access Journals (Sweden)

Valais M.

2006-11-01

Full Text Available Cette étude décrit les caractéristiques et les implications économiques les plus importantes de l'industrie automobile dans le monde. Après avoir situé l'importance des grands pays constructeurs mondiaux par leurs productions, leurs parcs et leurs échanges, la situation de la France est étudiée plus particulièrement. Cette analyse plus fine montre la structure et aussi les relations de l'industrie automobile française avec son marché, ses concurrents extérieurs, l'économie nationale tout entière et celle de ses utilisateurs. This survey covers the most important features and economic implications of the automotive industry in the world. After situating the positions of the leading worldwide manufacturers with regard to their output, the number of their vehicles in use and their foreign trade, special attention is paid to the situation of France. This closer analysis shows the structure of the automotive industry as well as its relations with its market, its foreign markets, the national economy as a whole and that of its users.

Performance evaluation of effluent treatment plant for automobile industry

Energy Technology Data Exchange (ETDEWEB)

Ansari, Farid [Department of Applied Science and Humanities, PDM College of Engineering, Bahadurgarh (Haryana) (India); Pandey, Yashwant K. [School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore (India); Kumar, P.; Pandey, Priyanka [Department of Environmental Science, Post Graduate College Ghazipur (IN

2013-07-01

The automobile industry’s wastewater not only contains high levels of suspended and total solids such as oil, grease, dyestuff, chromium, phosphate in washing products, and coloring, at various stages of manufacturing but also, a significant amount of dissolved organics, resulting in high BOD or COD loads. The study reveals the performance, evaluation and operational aspects of effluent treatment plant and its treatability, rather than the contamination status of the real property. The Results revealed that the treated effluent shows most of the parameters are within permissible limits of Central Pollution Control Board (CPCB), India and based on the site visits, discussion with operation peoples, evaluation of process design, treatment system, existing effluent discharge, results of sample analyzed and found that effluent treatment plant of automobile industry are under performance satisfactory.

Measurement of Gamma Radiation in an Automobile Mechanic ...

African Journals Online (AJOL)

Environmental radiation measurement was carried out in an automobile mechanic village, Apo, Abuja, Nigeria. An in-situ measurement approach was adopted using RDS-200 Universal Survey Meter and a handheld Global Positioning System (Garmin GPS 76S) equipment. It was observed that the dose equivalent varied ...

Reduced Haematopoietic Output in Automobile Mechanics and Sprayers with Chronic Exposure to Petrochemicals: A Case-Control Study in Cape Coast, Ghana.

Science.gov (United States)

Adu, Patrick; Pobee, Richard; Awuah, Aaron; Asiamah, Paul B; Amoani, Festus; Gyabaa, Sampson

2018-01-01

Automobile mechanics and sprayers are at a higher risk of exposure to hazardous chemicals such as polycyclic aromatic hydrocarbons and heavy metals which may cause adverse health outcomes. This study aimed to use reticulocyte count as an indirect measure of the haematological output in automobile mechanics and sprayers in the Cape Coast Metropolis, Ghana. This cross-sectional study recruited 130 participants: 90 cases (57 automobile mechanics and 33 automobile sprayers) and 40 controls (nonautomobile workers). Venous blood samples were drawn from the participants and examined for full blood count and absolute reticulocyte count. Semi-structured questionnaire was used to collect demographic and occupational safety information from participants. 75.6% of cases had never received occupational safety training. Whereas 35.1% of automobile mechanics routinely siphoned fuel, 36.4% of automobile sprayers never used nose masks in the discharge of their duties. Controls had significantly higher WBC counts compared to mechanics ( p = 0.0001; 5.04 ± 1.7 versus 3.81 ± 1.1), or sprayers ( p = 0.0004; 5.04 ± 1.7 versus 3.74 ± 0.9). Lymphocyte, monocyte, and platelet counts were also significantly higher in controls compared to cases. Whereas RBC counts were significantly higher in controls compared to automobile mechanics (4.85 versus 4.66; p = 0.034), haemoglobin levels were significantly higher in automobile sprayers compared to controls (15.13 versus 14.1 g/dl; p = 0.0126). Absolute reticulocyte count was significantly higher in controls compared to cases [ p mechanics)]. Among the cases however, only RBC counts were significantly lower in automobile mechanics compared to automobile sprayers ( p = 0.0088; 4.66 ± 0.4 versus 4.85 ± 0.5). It was evident that both automobile mechanics and sprayers had significantly reduced haematopoietic output. Occupational safety training is not given priority and must be addressed.

The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

Energy Technology Data Exchange (ETDEWEB)

Appert, O; Pinchon, Ph

2004-07-01

In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

Directory of Open Access Journals (Sweden)

Sunil Luthra

2011-07-01

Full Text Available Purpose: Green Supply Chain Management (GSCM has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have identified various barriers and contextual relationships among the identified barriers. Classification of barriers has been carried out based upon dependence and driving power with the help of MICMAC analysis. In addition to this, a structural model of barriers to implement GSCM in Indian automobile industry has also been put forward using Interpretive Structural Modeling (ISM technique. Findings: Eleven numbers of relevant barriers have been identified from literature and subsequent discussions with experts from academia and industry. Out of which, five numbers of barriers have been identified as dependent variables; three number of barriers have been identified as the driver variables and three number of barriers have been identified as the linkage variables. No barrier has been identified as autonomous variable. Four barriers have been identified as top level barriers and one bottom level barrier. Removal of these barriers has also been discussed.Research limitations/implications: A hypothetical model of these barriers has been developed based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation problem. Practical implications: Clear understanding of these barriers will help organizations to prioritize better and manage their resources in an efficient and effective way.Originality/value: Through this paper we contribute to identify the barriers to implement GSCM in Indian automobile industry and to prioritize them

Quantifying the association between obesity, automobile travel, and caloric intake.

Science.gov (United States)

Behzad, Banafsheh; King, Douglas M; Jacobson, Sheldon H

2013-02-01

The objective of this study is to assess the association between average adult body mass index (BMI), automobile travel, and caloric intake in the US in order to predict future trends of adult obesity. Annual BMI data (1984-2010) from the Behavioral Risk Factor Surveillance System (BRFSS), vehicle miles traveled data (1970-2009) from the Federal Highway Administration, licensed drivers data (1970-2009) from the Federal Highway Administration, and adult average daily caloric intake data (1970-2009) from the US Department of Agriculture were collected. A statistical model is proposed to capture multicollinearity across the independent variables. The proposed statistical model provides an estimate of changes in the average adult BMI associated with changes in automobile travel and caloric intake. According to this model, reducing daily automobile travel by one mile per driver would be associated with a 0.21 kg/m(2) reduction in the national average BMI after six years. Reducing daily caloric intake by 100 calories per person would be associated with a 0.16 kg/m(2) reduction in the national average BMI after three years. Making small changes in travel or diet choices may lead to comparable obesity interventions, implying that travel-based interventions may be as effective as dietary interventions. Copyright © 2012 Elsevier Inc. All rights reserved.

Impact Analysis of Transportation Modal Shift on Regional Energy Consumption and Environmental Level: Focused on Electric Automobiles

OpenAIRE

Hong Bae Kim; Chang Ho Hur

2016-01-01

Many governments have tried to reduce CO2 emissions which are believed to be the main cause for global warming. The deployment of electric automobiles is regarded as an effective way to reduce CO2 emissions. The Korean government has planned to deploy about 200,000 electric automobiles. The policy for the deployment of electric automobiles aims at not only decreasing gasoline consumption but also increasing electricity production. However, if an electricity consuming regions is not consistent...

INTEGRATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN TEACHING RUSSIAN AS A FOREIGN LANGUAGE FOR SPECIAL PURPOSES

OpenAIRE

Sergey S. Chromov; Nadezda A. Gulayeva; Irina S. Zelenetskaya

2015-01-01

The paper is untended to draw attention to information communication technologiesin teaching Russian as a foreign language for special purposes at level B 2. In thisregard the educational process of teaching Russian as a foreign language is examinedfor promoting quality improvement in the process of ELT.Technology-enhances language learning(TELL) is described through computer-assisted language learning(CALL)-presentations, webinars, videolectures. The authors share their experience obtained d...

Special Purpose Nuclear Reactor (5 MW) for Reliable Power at Remote Sites Assessment Report

Energy Technology Data Exchange (ETDEWEB)

Sterbentz, James William [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Werner, James Elmer [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; McKellar, Michael George [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Hummel, Andrew John [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Kennedy, John Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Wright, Richard Neil [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Biersdorf, John Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division

2017-04-01

The Phenomena Identification and Ranking Table (PIRT) technique was conducted on the Special Purpose Reactor nuclear plant design. The PIRT is a structured process to identify safety-relevant/safety-significant phenomena and assess the importance and knowledge base by ranking the phenomena. The Special Purpose Reactor is currently in the conceptual design stage. The candidate reactor has a solid monolithic stainless steel core with an array of heat pipes and fuel pellets embedded in the monolith. The heat pipes are used to remove heat from the core using simple, reliable, and well-characterized physics (capillarity, boiling, and condensation). In the initial design, one heat exchanger is used for the working fluid that produces energy, and a second heat exchanger is used to remove decay heat in emergency or shutdown conditions. In addition, a power conversion cycle such as an open-air Brayton system is available as an option for power conversion and process heat. This report summarizes and documents the process and scope of the four PIRT reviews, noting the major activities and conclusions. The identified phenomena, analyses, rationales, and associated ratings are presented along with a summary of the findings from the four individual PIRTs, namely (1) Reactor Accident and Normal Operations, (2) Heat Pipes, (3) Materials, and (4) Power Conversion. The PIRT reports for these four major system areas evaluated are attached as appendixes to this report and provide considerably more detail about each assessment as well as a more complete listing of the phenomena that were evaluated.

Trends in chassis and automobile electronics components

Energy Technology Data Exchange (ETDEWEB)

Hackenberg, Ulrich [Volkswagen AG, Wolfsburg (Germany)

2008-07-01

The rapidly-growing importance of electronics in automobile construction is in part determined by the debate on sustainability and the clear trend towards electric power trains. Another factor, however, is the decisive impact of electronics on the further development of components, e.g. for chassis. Apart from environmental protection, key motivators for component development include comfort, safety, infotainment and driver assistance. (orig.)

High-speed BWR power plant simulations on the special-purpose peripheral processor AD10

International Nuclear Information System (INIS)

Wulff, W.; Cheng, H.S.; Lekach, S.V.; Mallen, A.N.

1985-01-01

A newly developed technique is described for fast, on-line simulations of normal and accidental transients in nuclear power plants. The technique is based on the utilization of the special-purpose peripheral processor AD10, which is specifically designed for high-speed systems simulations through integration of large systems of nonlinear ordinary differential equations. The Peach Bottom-II Boiling Water Reactor power plant has been simulated and results are presented. It is shown that the new technique not only advances safety analyses but also supports plant monitoring, failure diagnosis and accident mitigation, as well as the training of nuclear power plant operators. (author)

[Reduction of automobile traffic: urgent health promotion policy].

Science.gov (United States)

Tapia Granados, J A

1998-03-01

During the last few decades, traffic injuries have become one of the leading causes of death and disability in the world. In urban areas, traffic congestion, noise, and emissions from motor vehicles produce subjective disturbances and detectable pathological effects. More than one billion people are exposed to harmful levels of environmental pollution. Because its combustion engine generates carbon dioxide (CO2), the automobile is one of the chief sources of the gases that are causing the greenhouse effect. The latter has already caused a rise in the average ambient temperature, and over the next decades it will predictable cause significant climatic changes whose consequences, though uncertain, are likely to be harmful and possibly catastrophic. Aside from the greenhouse effect, the relentless growth of parking zones, traffic, and the roadway infrastructure in urban and rural areas is currently one of the leading causes of environmental degradation. Urban development, which is nearly always "planned" around traffic instead of people, leads to a significant deterioration in the quality of life, while it also destroys the social fabric. Unlike the private automobile, public transportation, bicycles, and walking help reduce pollution, congestion, and traffic volume, as well as the morbidity and mortality resulting from injuries and ailments related to pollution. Non-automobile transportation also encourages physical activity--with its positive effect on general health--and helps reduce the greenhouse effect. The drop in traffic volume and the increased use of alternate means of transportation are thus an integrated health promotion policy which should become an inherent part of the movement for the promotion of healthy cities and of transportation policies and economic policy in general.

MDGRAPE-4: a special-purpose computer system for molecular dynamics simulations.

Science.gov (United States)

Ohmura, Itta; Morimoto, Gentaro; Ohno, Yousuke; Hasegawa, Aki; Taiji, Makoto

2014-08-06

We are developing the MDGRAPE-4, a special-purpose computer system for molecular dynamics (MD) simulations. MDGRAPE-4 is designed to achieve strong scalability for protein MD simulations through the integration of general-purpose cores, dedicated pipelines, memory banks and network interfaces (NIFs) to create a system on chip (SoC). Each SoC has 64 dedicated pipelines that are used for non-bonded force calculations and run at 0.8 GHz. Additionally, it has 65 Tensilica Xtensa LX cores with single-precision floating-point units that are used for other calculations and run at 0.6 GHz. At peak performance levels, each SoC can evaluate 51.2 G interactions per second. It also has 1.8 MB of embedded shared memory banks and six network units with a peak bandwidth of 7.2 GB s(-1) for the three-dimensional torus network. The system consists of 512 (8×8×8) SoCs in total, which are mounted on 64 node modules with eight SoCs. The optical transmitters/receivers are used for internode communication. The expected maximum power consumption is 50 kW. While MDGRAPE-4 software has still been improved, we plan to run MD simulations on MDGRAPE-4 in 2014. The MDGRAPE-4 system will enable long-time molecular dynamics simulations of small systems. It is also useful for multiscale molecular simulations where the particle simulation parts often become bottlenecks.

29 CFR 785.40 - When private automobile is used in travel away from home community.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false When private automobile is used in travel away from home community. 785.40 Section 785.40 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... WORKED Application of Principles Traveltime § 785.40 When private automobile is used in travel away from...

Automobile industry and new bio-fuel oils: International panorama

International Nuclear Information System (INIS)

Hampel, G.

1992-01-01

In assessing the technical/economic feasibility of the direct combustion of vegetable oils in diesel type engines, this paper first points out the good results obtained in performance tests on these fuels in Elsberg engines, and their low sulfur and nitrogen oxides and carbon dioxide emission characteristics. It then assesses the improvements that are necessary in the development of marketable bio-fuel oils that conform to European Communities air pollution standards for automobiles. Further efforts must be made to reduce bio-fuel oil smoke emission levels, to compensate for their lower calorific value as compared with conventional diesel fuels, and to make them compatible with automobile finishing materials - paints and plastics. The paper suggests a set of suitable fiscal policies designed to favour the marketing of bio-diesel fuels based on their favourable pollution abating qualities - low greenhouse gas emissions and biodegradability

Special purpose materials. Annual progress report, October 1, 1979

International Nuclear Information System (INIS)

1980-04-01

Fusion reactor materials problems other than the first-wall and blanket structural materials are investigated. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, grahite and SiC, heat-sink materials, ceramics, and materials for high-field (>10-T) superconducting magnets. Radiation-induced conductivity of three forms of Al 2 O 3 was measured as a function of ionizing dose rate and temperature. Increases observed are large enough to affect performance of insulators under some fusion reactor operating conditions. Single-crystal MgAl 2 O 4 was shown to exhibit zero swelling when irradiated to approx. 2 x 10 26 n/m 2 at 925 and 1100 K. This ceramic is resistant to nucleation and growth of defect aggregates, and is not characterized by those microstructural conditions which lead to void formation and swelling in Al 2 O 3 . Fracture toughness of single-crystal Al 2 O 3 was significantly increased by elevated-temperature irradiation to approx. 2 x 10 26 n/m 2 , while that for MgAl 2 O 4 and Y 3 Al 5 O 12 showed little or no change. These results show that ceramics can retain their original resistance to crack propagation after high-dose neutron irradiation

Vertical Keiretsu and International Market Entry: The Case of the Japanese Automobile Ancillary Industry

OpenAIRE

Kunal Banerji; Rakesh B Sambharya

1996-01-01

This study investigated whether small Japanese automobile ancillary firms followed the major Japanese automakers in setting up production facilities in the United States. Based on Dunning's eclectic theory of foreign direct investment and resource dependence theory, hypotheses were generated to explain the determinants of foreign investment of Japanese suppliers. It was hypothesized that mutual dependencies between the major Japanese automobile firms and their suppliers, firm-specific ownersh...

Emissions and prevention/control techniques for automobile body shops in Ciudad Juarez, Mexico

Energy Technology Data Exchange (ETDEWEB)

Jeffery, J.D.; Sager, M.

1999-08-01

Emissions of Volatile Organic Compounds (VOC) from automobile body repair shops are believed to be significant and to contribute to ozone nonattainment in El Paso, Texas and to violations of ozone air quality standards in Ciudad Juarez, Mexico. The Direccion de Desarrollo Urbano Y Ecologia (DDUE), (the local agency in Ciudad Juarez, Mexico) requested CICA's assistance in determining emissions from and identifying appropriate pollution prevention and control techniques for automobile body repair shops in Ciudad Juarez.

The Development of Green Clusters of the Automobile Industry in the Russian Region

Directory of Open Access Journals (Sweden)

Alexander A. Khokhlov

2017-06-01

Full Text Available The article shows the expediency of forming of a green cluster of the automobile industry and indicates the possibility of implementation through the development of electric vehicles as one of the environmentally friendly modes of transport. It is proved that their production requires the joint efforts of the automobile industry, small and medium business enterprises and organizations in other industries that manufacture components and equipment for electric cars. Further the possibility and expediency of launching of environmentally friendly vehicles is proved through the provision of issue in the process of import substitution in the automotive industry. The assumed centres of the green clusters of the automobile industry are selected, they are companies that are potential manufacturers of automobiles, having the properties of environmentally friendly vehicles: PJSC "AVTOVAZ", "GAZ". The scheme of realization of perspective projects on creation of models and production of electric vehicles is represented in the framework of activation of cooperation between state, municipal and business structures in the Russian regions. It is proposed as an institutional form of their interaction to use the concept of a consortium of the automotive industry, which principles are reflected in the text. It is concluded that in the automotive industry in the Russian regions there are possibilities of formation of territorial and production clusters based on the foundations of a green economy in the Russian Federation.

Emergency distress call system for automobiles in Lagos state, Nigeria

African Journals Online (AJOL)

Emergency distress call system for automobiles in Lagos state, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... and communications technology capabilities to transportation and the medical care system in order to save lives, ...

Hybrid modeling and empirical analysis of automobile supply chain network

Science.gov (United States)

Sun, Jun-yan; Tang, Jian-ming; Fu, Wei-ping; Wu, Bing-ying

2017-05-01

Based on the connection mechanism of nodes which automatically select upstream and downstream agents, a simulation model for dynamic evolutionary process of consumer-driven automobile supply chain is established by integrating ABM and discrete modeling in the GIS-based map. Firstly, the rationality is proved by analyzing the consistency of sales and changes in various agent parameters between the simulation model and a real automobile supply chain. Second, through complex network theory, hierarchical structures of the model and relationships of networks at different levels are analyzed to calculate various characteristic parameters such as mean distance, mean clustering coefficients, and degree distributions. By doing so, it verifies that the model is a typical scale-free network and small-world network. Finally, the motion law of this model is analyzed from the perspective of complex self-adaptive systems. The chaotic state of the simulation system is verified, which suggests that this system has typical nonlinear characteristics. This model not only macroscopically illustrates the dynamic evolution of complex networks of automobile supply chain but also microcosmically reflects the business process of each agent. Moreover, the model construction and simulation of the system by means of combining CAS theory and complex networks supplies a novel method for supply chain analysis, as well as theory bases and experience for supply chain analysis of auto companies.

Report for fiscal 1998 on feasibility study for introduction of electric automobiles; 1998 nendo denki jidosha donyu kanosei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Surveys have been made on the characteristics of environmentally harmonizing automobiles, and the status of development and introduction thereof inside and outside the country. Discussions were given on the possibility of introducing electric automobiles in Japan. In developing environmentally harmonizing automobiles in Japan, works have been executed on low pollution type components such as lean burn engines, electric automobiles, gasoline engine and electric motor hybrid cars, methanol fueled cars, and fuel cell automobiles. Some of them are already in use in spite of their high price. In America, a cooperation project for the next generation cars has been implemented by mobilizing industrial, academic and governmental organizations. Based on the achievements thereof, the car makers have announced their original advanced cars respectively. In the EU, development of low exhaust gas cars and zero emission cars is being carried out jointly by the related industries setting years 2003 to 2005 as the target. An urban type traffic system utilizing electric vehicles, and a traffic system dividing movements of short distance and long distance are proposed as the means to introduce the future electric automobiles. (NEDO)

Esophageal rupture caused by explosion of an automobile tire tube: a case report.

Science.gov (United States)

Yu, Yongkang; Ding, Sheng; Zheng, Yifeng; Li, Wei; Yang, Lie; Zheng, Xiushan; Liu, Xiaoyan; Jiang, Jianqing

2013-08-23

There have been no reports in the literature of esophageal rupture in adults resulting from an explosion of an automobile tire. We report the first case of just such an occurrence after an individual bit into a tire, causing it to explode in his mouth. A 47-year-old Han Chinese man presented with massive hemorrhage in his left eye after he accidentally bit an automobile tire tube which burst into his mouth. He was diagnosed with esophageal rupture based on a chest computed tomography scan and barium swallow examination. Drainage of empyema (right chest), removal of thoracic esophagus, exposure of cervical esophagus, cardiac ligation and gastrostomy were performed respectively. After that, esophagogastrostomy was performed. Successful anastomosis was obtained at the neck with no postoperative complications 3 months after the surgery. The patient was discharged with satisfactory outcomes. We present this case report to bring attention to esophageal rupture in adults during the explosion of an automobile tire tube in the mouth.

Study on Micro Wind Generator System for Automobile

Science.gov (United States)

Fujimoto, Koji; Washizu, Shinsuke; Ichikawa, Tomohiko; Yukita, Kazuto; Goto, Yasuyuki; Ichiyanagi, Katsuhiro; Oshima, Takamitsu; Hayashi, Niichi; Tobi, Nobuo

This paper proposes the micro wind generator system for automobile. This proposes system is composed of the deflector, the micro windmill, the generator, and electric storage device. Then, the effectiveness is confirmed from an examination using air blower. Therefore, new energy can be expected to be obtained by installing this system in the truck.

Assessment of soil-pollution by slag from an automobile battery ...

African Journals Online (AJOL)

Administrator

automobile battery manufacturing plant in Nigeria. Gilbert U. Adie1* and .... Contamination of the environment with heavy metals .... assessment of heavy metal contamination using ..... contact with the soil or through food chain with water,.

Evaluation of purchase intention of customers in two wheeler automobile segment: AHP and TOPSIS

Science.gov (United States)

Sri Yogi, Kottala

2018-03-01

Winning heart of customers is preeminent main design of any business organization in global business environment. This paper explored customer’s priorities while purchasing a two wheeler automobile segment using Analytical Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) as a multi criteria decision making tools to accomplish the research objectives. Study has been done to analyze different criteria to be considered during purchasing of two wheeler automobiles among respondents using structured questionnaire based on SAATY scale. Based on our previous work on empirical & fuzzy logic approach to product quality and purchase intention of customers in two wheeler- operational, performance, economic, brand value and maintenance aspects are considered as decision criteria of customers while purchasing a two wheeler. The study suggests high pick up during overtaking, petrol saving, reasonable spare parts price, unique in design and identity and easy to change gear as main criterion in purchasing process. We also found some leading two wheeler automobiles models available in Indian market using some objective function criterion in choosing some important characteristics like price, cylinder capacity, brake horse power and weight during purchasing process of two wheeler automobile in Indian market based on respondents perception.

"Desverticalização"/"terceirização" e as relações de subcontratação no complexo automobilístico brasileiro Vertical desintegration/outsourcing and the subcontracting relations in the Brazilian automobile industry

Directory of Open Access Journals (Sweden)

João Amato Neto

1994-04-01

Full Text Available O presente estudo tem por objetivo básico investigar, dentro do quadro de reestruturação da indústria mundial, quais são os principais fatores que têm motivado as grandes empresas a adotarem estratégias de "desintegração vertical", com a contrapartida de "terceirização" e "subcontratação" de pequenas empresas (fornecedoras de peças, componentes, etc.. Busca, ainda, entender este fenômeno a partir das estratégias da grande empresa industrial em busca de maior flexibilidade e tendo em vista o advento do novo paradigma de produção industrial, onde as relações inter-empresas sob a "filosofia" 'just-in-time' e de qualidade assegurada (qualidade total passam a ganhar maior relevância. Inicialmente são apresentados alguns aspectos dessa problemática a nível da indústria automobilística mundial para, posteriormente, analisar-se, a partir da pesquisa de campo, o caso do complexo automobilístico brasileiro.The aim of this study is to investigate, based on the context of the global industry restructuring, the main factors which have induced the process of vertical desintegration of the larger companies in the brazilian automobile industry. It involves the consequent increase of outsourcing process by the same companies. Thirteen case studies are presented (5 automakers and 8 autoparts companies with the purpose of identifying the tendency of these fenomena (vertical desintegration / outsourcing process within the brazilian automobile complex. These case studies provide some evidence which allow us to reach some conclusions, for instance: the relationship between the automakers and the autoparts companies belonging to the first step of the "subcontracting pyramid" has become less conflicting. But the relationship between the autoparts companies ("first step" and their suppliers (second, third,...steps is still based upon the "exit strategy", representing a lot of problems to both sides (e.g. : delay in delivers, high rate of low

Electric Car Special

Energy Technology Data Exchange (ETDEWEB)

Zoethout, T.; Belin, H.; Verwijs, H.; Nicola, S.; De Saint Jacob, Y.; Gatermann, R.

2009-09-15

In six articles, two columns and two interviews a part of this issue is dedicated to electric car developments: about winners and losers in the electric car race; a unique business model to rolling out the electric car by the electric battery company Better Place and the automobile industry Renault Nissan; interview with entrepreneur Shai Agassi of the Indian company Better Place; the development of electric cars in Germany; interview with Jean-Jacques Chanaron, an economist specialising in innovation management and a firm believer in electric cars; start of mass production of electric vehicles at the Japanese Nissan automobile industry; the constraints in Sweden in developing fuel-efficient automobiles; plans for 1 million electric or hybrid cars by 2025 in the Netherlands.

Establishment of the foundation for international collaborating research with US NASA FTCSC to develop space, military and special purpose food

International Nuclear Information System (INIS)

Jo, Chul Hun; Byun, Myung Woo; Lee, Ju Wun; Kim, Dong Ho; Kim, Kyung Pho; Kim, Jang Ho; Kwon, Jung Ho

2005-08-01

In the space era of 21st century, the advancement of aerospace field is essential for ensuring the national security and raising the national status. Internationally spacefood and space life support system is considered as an limitedly developed technology area. Establishment of the foundation for collaborating study with NASA FTCSC to develop space, military, and special food. Acquirement of the basis of the technology development for safe, long-term preservation of military and special purpose food to ensure national security as well as health and welfare

Characterization of biological aerosol exposure risks from automobile air conditioning system.

Science.gov (United States)

Li, Jing; Li, Mingzhen; Shen, Fangxia; Zou, Zhuanglei; Yao, Maosheng; Wu, Chang-yu

2013-09-17

Although use of automobile air conditioning (AC) was shown to reduce in-vehicle particle levels, the characterization of its microbial aerosol exposure risks is lacking. Here, both AC and engine filter dust samples were collected from 30 automobiles in four different geographical locations in China. Biological contents (bacteria, fungi, and endotoxin) were studied using culturing, high-throughput gene sequence, and Limulus amebocyte lysate (LAL) methods. In-vehicle viable bioaerosol concentrations were directly monitored using an ultraviolet aerodynamic particle sizer (UVAPS) before and after use of AC for 5, 10, and 15 min. Regardless of locations, the vehicle AC filter dusts were found to be laden with high levels of bacteria (up to 26,150 CFU/mg), fungi (up to 1287 CFU/mg), and endotoxin (up to 5527 EU/mg). More than 400 unique bacterial species, including human opportunistic pathogens, were detected in the filter dusts. In addition, allergenic fungal species were also found abundant. Surprisingly, unexpected fluorescent peaks around 2.5 μm were observed during the first 5 min use of AC, which was attributed to the reaerosolization of those filter-borne microbial agents. The information obtained here can assist in minimizing or preventing the respiratory allergy or infection risk from the use of automobile AC system.

Bioaccumulation of Heavy Metals by Moringa Oleifera in Automobile ...

African Journals Online (AJOL)

Plants accumulate minerals essential for their growth from the environment alongside with heavy metals from contaminated areas.This study investigated bioaccumulation of heavy metals by Moringa oleifera in automobile workshops in three selected local government areas in Ibadan. This was done with a view to ...

OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

Directory of Open Access Journals (Sweden)

Sujit Kumar Jha

2013-06-01

Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine.

Conceptual design studies of special-purpose equipment for Fusion Engineering Device torus-sector remote maintenance

International Nuclear Information System (INIS)

Masson, L.S.; Watts, K.D.; Aldrich, W.E.; McPherson, R.S.

1982-01-01

One of the major maintenance operations anticipated for fusion reactors of the Tokamak configuration is remote removal and replacement of torus sectors. This operation will be difficult due to the massive nature of the sector (375 tonnes), and also due to the precision with which it must be positioned within the fixed structure. The same problem, only to a lesser degree, applies to sub-components of the sector such as the limiter blades, shielding, test assemblies, etc. General and specific design requirements have been generated and trade studies conducted on reactor interfacing details as well as handling machine concepts. On the basis of the design requirements and trade studies, a perferred concept for the sector handling machine was developed. In addition, a similar machine was developed for handling the intermediate sized sector sub-components. While most operations will be performed by special purpose machines such as described above, there is a need for a versatile, relatively high capacity mobile system. A concept suitable for this mobile application was also developed as part of these studies. The general conclusion, to the extent these studies have been completed, was that special single-purpose machines will be required to perform the operations requiring high load capacity and handling precision. The machine concepts developed were felt to be within the state-of-the-art, and will make extensive use of commercially available components. The most serious problem was felt to be development of simple methods to obtain the required precision in positioning massive objects such as the torus sector

Assessing Cognitive Distraction in the Automobile.

Science.gov (United States)

Strayer, David L; Turrill, Jonna; Cooper, Joel M; Coleman, James R; Medeiros-Ward, Nathan; Biondi, Francesco

2015-12-01

The objective was to establish a systematic framework for measuring and understanding cognitive distraction in the automobile. Driver distraction from secondary in-vehicle activities is increasingly recognized as a significant source of injuries and fatalities on the roadway. Across three studies, participants completed eight in-vehicle tasks commonly performed by the driver of an automobile. Primary, secondary, subjective, and physiological measures were collected and integrated into a cognitive distraction scale. In-vehicle activities, such as listening to the radio or an audio book, were associated with a low level of cognitive workload; the conversation activities of talking to a passenger in the vehicle or conversing with a friend on a handheld or hands-free cell phone were associated with a moderate level of cognitive workload; and using a speech-to-text interfaced e-mail system involved a high level of cognitive workload. The research established that there are significant impairments to driving that stem from the diversion of attention from the task of operating a motor vehicle and that the impairments to driving are directly related to the cognitive workload of these in-vehicle activities. Moreover, the adoption of voice-based systems in the vehicle may have unintended consequences that adversely affect traffic safety. These findings can be used to help inform scientifically based policies on driver distraction, particularly as they relate to cognitive distraction stemming from the diversion of attention to other concurrent activities in the vehicle. © 2015, Human Factors and Ergonomics Society.

The Analysis of Vertical Transaction Behavior and Performance Based on Automobile Brand Trust in Supply Chain

Directory of Open Access Journals (Sweden)

Guanglan Zhou

2016-01-01

Full Text Available The nontrust behaviors among the automobile supply chain members lead to a trust crisis situation. Under such circumstances, this paper studies the mutual influences of trust, enterprise behavior, and transaction performance on the independent brand automobile supply chain. The business behavior concept which consists of information sharing, joint action, and specific asset investment is proposed. Then, the paper tests the reliability and validity of the collected data through Structural Equation Modeling (SEM. Through empirical test and analysis on mutual relationship among vertical transaction enterprise behaviors, trust, and transaction performance, the vertical transaction enterprise behaviors can be regulated, so as to improve the efficiency of independent brand automobile supply chain.

Evaluation of genotoxicity in automobile mechanics occupationally exposed to polycyclic aromatic hydrocarbons using micronuclei and other nuclear abnormalities.

Science.gov (United States)

Khan, Mohammed Rafiq; Sudha, Sellappa

2012-01-01

Occupational and environmental exposures mostly represent mixtures of genotoxic agents, whereas the specificity of biomarker measurements varies widely. Exploration of correlations among biomarkers contributes to the further progress of molecular cancer epidemiology and to the selection of the optimal biomarkers for the investigation of human exposure to carcinogens. The aim of this study was to assess the potential cytogenetic damage associated with occupational exposure to Polycyclic Aromatic Hydrocarbons (PAHs) among automobile mechanics by using Micronuclei (MN) and other Nuclear Abnormalities (NA) as a biomarker. The study population composed of 110 occupationally exposed automobile mechanics and 100 unexposed controls. All the study participants were males. Both the exposed and control individuals were selected from automobile garages located in the urban area of Coimbatore City, South India. Exfoliated buccal cells were collected from 110 automobile mechanics and 100 age and sex matched controls. Further, cells were examined for MN frequency and Nuclear Abnormalities (NA) other than micronuclei, such as binucleates, broken eggs and karyolysis. Results showed a statistically significant difference between occupationally exposed automobile mechanics and control groups. MN and NA frequencies in automobile mechanics were significantly higher than those in control groups (p < 0.05) and also significantly related to smoking habit (p < 0.05). In addition, a higher degree of NA was observed among the exposed subjects with smoking, drinking, tobacco chewing, which is an indicative of cytogenetic damage in these individuals. MN and other NA reflect genetic changes, events associated with carcinogenesis. Therefore, the results of this study indicate that automobile mechanics exposed to PAHs are under risk of significant cytogenetic damage. Therefore, it is important to provide and offer better awareness of occupational hazards among these workers to promote

APPLICATION OF FAILURE MODE & EFFECT ANALYSIS (FMEA FOR CONTINUOUS QUALITY IMPROVEMENT - MULTIPLE CASE STUDIES IN AUTOMOBILE SMES

Directory of Open Access Journals (Sweden)

Jigar Doshi

2017-06-01

Full Text Available Failure Mode and Effects Analysis (FMEA is a quality tool used to identify potential failures and related effects on processes and products, so continuous improvement in quality can be achieved by reducing them. The purpose of this research paper is to showcase the contribution of FMEA to achieve Continuous Quality Improvement (CQI by multiple case study research. The outcome research conducted by implementing FMEA; one of the Auto Core Tools (ACTs, in the automobile Small and Medium Enterprises (SMEs in Gujarat, India is presented in this paper which depict various means of Continuous Quality Improvements. The case study based research was carried out in four automobile SMEs; all of them are supplied to automotive Original Equipment Manufacturer (OEM. The FMEA was implemented with the help of Cross Functional Team (CFT to identify the potential failure modes and effects, in overall effect on Continuous Quality Improvement. The outcome of FMEA at four companies' reveals the scope of improvement exists in the manufacturing process. Implementation of those improvement points shows the definite signs of continuous improvement of the quality of process and product as well. The FMEA and subsequent implementations had reduced the quality rejections around 3% to 4% in case companies.

Alternative propulsion for automobiles

CERN Document Server

Stan, Cornel

2017-01-01

The book presents – based on the most recent research and development results worldwide - the perspectives of new propulsion concepts such as electric cars with batteries and fuel cells, and furthermore plug in hybrids with conventional and alternative fuels. The propulsion concepts are evaluated based on specific power, torque characteristic, acceleration behaviour, specific fuel consumption and pollutant emissions. The alternative fuels are discussed in terms of availability, production, technical complexity of the storage on board, costs, safety and infrastructure. The book presents summarized data about vehicles with electric and hybrid propulsion. The propulsion of future cars will be marked by diversity – from compact electric city cars and range extender vehicles for suburban and rural areas up to hybrid or plug in SUV´s, Pick up´s and luxury class automobiles.

Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

Energy Technology Data Exchange (ETDEWEB)

Zhu, W B; Li, D S; Lu, Y [China Jiliang University, Hangzhou, Zhejiang province, 310018 (China)

2006-10-15

Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request.

Investigation of Electrical Energy Efficiency Use in an Automobile Assembly Industry

Directory of Open Access Journals (Sweden)

Jacob TSADO

2016-12-01

Full Text Available This research work investigated the electrical energy efficiency improvement and cost saving potentials for automobile assembly plant; a case of Peugeot Automobile Nigeria Limited. The study identified lighting system as a major source through which energy is being wasted, hence efficient energy saving lighting systems are being proffered; also saving accrued were determined to justify their deployment. In the course of this work, an energy saving calculating tool was developed to calculate energy saving capabilities using energy efficient lamps. With ample devotion to the implementation of the recommendations made, the cost of energy per car will be drastically reduced while profits are also made simultaneously. In all, more cars will be produced thus translating to more employment opportunities in the industry.

Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

International Nuclear Information System (INIS)

Zhu, W B; Li, D S; Lu, Y

2006-01-01

Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request

32 CFR 57.1 - Purpose.

Science.gov (United States)

2010-07-01

... Individualized Educational Programs (IEP). (4) Monitoring of DoD programs providing EIS, special education, and... INTERVENTION AND SPECIAL EDUCATION SERVICES TO ELIGIBLE DOD DEPENDENTS § 57.1 Purpose. This part: (a... with disabilities (birth through 2 years, inclusive) and their families, and special education and...

The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

Energy Technology Data Exchange (ETDEWEB)

Appert, O.; Pinchon, Ph.

2004-07-01

In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

Influence of Product Quality, Brand Image and Price Concerning Automobile Buying Decision of Toyota Avanza at PT. Nasmoco Majapahit Semarang

OpenAIRE

Putra, Arya Willis Nugraha; Waluyo, Handoyo Djoko; Nugraha, Hari Susanta

2015-01-01

This research was based on rapid automotive sector business development, especially automobile. Specifically, this research was discuss about automobile buying of Toyota Avanza brand at PT Nasmoco Majapahit Semarang during 2011 - 2014 keep have sale descending and it's sale target. If that case wasn't improve and solve, probably will presence problem for PT. Nasmoco Majapahit Semarang next.Aim of this research was to found product quality, brand image and price concerning automobile buying de...

29 CFR 500.104 - Department of Labor standards for passenger automobiles and station wagons and transportation of...

Science.gov (United States)

2010-07-01

... holding on an incline. Brake systems shall be free of leaks. (c) Tires. Tires shall have at least 2/32... 29 Labor 3 2010-07-01 2010-07-01 false Department of Labor standards for passenger automobiles and... of Labor standards for passenger automobiles and station wagons and transportation of seventy-five...

Automobile Engine: Basic Ignition Timing. Fordson Bilingual Demonstration Project.

Science.gov (United States)

Vick, James E.

These two vocational instructional modules on basic automobile ignition timing and on engine operation, four-stroke cycle, are two of eight such modules designed to assist recently arrived Arab students, limited in English proficiency (LEP), in critical instructional areas in a comprehensive high school. Goal stated for this module is for the…

Micro-electronics and employment in the Japanese automobile industry.

OpenAIRE

Watanabe, S

1984-01-01

ILO pub-WEP pub. Working paper on the employment effects of microelectronics technological change and industrial robots in the motor vehicle industry in Japan - examines industrial processes, labour productivity, job requirements of automobile workers, effects on the subcontracting system and small scale industry, diffusion patterns and prospects, etc. Bibliography, references and statistical tables.

485 assessment of the problems of manual automobile tyre bead

African Journals Online (AJOL)

eobe

rim bead bond must be broken to carry out repairs on a failed automobile tyre. ... engine will not be transformed into the motion of the vehicle. It provides the only point of contact between ..... Popular Mechanic 162 (6): 62. http://books.google.

Factors behind international relocation and changes in production geography in the European automobile components industry

OpenAIRE

Jesús F. Lampón; Santiago Lago-Peñas

2013-01-01

This article analyses business strategies in the automobile sector to determine the key factors behind production relocation processes in automobile components suppliers. These factors help explain changes in production geography in the sector not only in terms of location advantages but also from a perspective of corporate strategies and decision-making mechanisms within firms. The results obtained from an empirical study in Spain during the period 2001-2008 show how the components sector h...

Chinese automobile industry: opportunities and business; El sector automovilistico Chino: oportunidades y negocios

Energy Technology Data Exchange (ETDEWEB)

Zhang Zhang, Y.

2010-07-01

The emergence of Chinese economy and its rapid recovery from global crisis have sustained a high rate of growth in Chinese automobile market. The article analyzes the industrial evolution of this particular market from the perspective of automobile manufacturers. Two concrete proposals have been suggested to explore these business opportunities exposed in the analyzed industry: investment in China to take advantage of market growth and hence gaining global competitive advantages, and being strategic partner of Chinese enterprises in European and global market. Strategic alternatives for both proposals have been discussed with suggestions and conclusions followed. (Author) 11 refs.

Additives: The key for automobiles to meet new emission standards

International Nuclear Information System (INIS)

Friedman, J.R.

1992-01-01

Many cities have been perplexed with automobile emissions causing them to become non-attainment areas. These cities usually resort to such tactics as trying to get people to car pool. In principle the concept is excellent, however, the American public is not ready to give up the independence of using their own automobile. Reformulated gasolines are presently being produced and plans for additional plants are being made to meet EPA gasoline requirements. How much reformulated gasoline is available? Where is the present production going? Who else has needs? Does Gasohol have any possibilities still? What contribution can other additives make and are there any bright spots on the horizon and if so what are they? All this will be revealed in this talk and paper at ETE. There will also be a panel discussion for others to present their ideas and contribute to the program

Automobile air-conditioning its energy and environmental impact; La climatisation automobile impact energetique et environnemental

Energy Technology Data Exchange (ETDEWEB)

Barbusse, St.; Gagnepain, L.

2003-05-01

Over the last three decades, automobile manufacturers have made a lot of progress in specific fuel consumption and engine emissions of pollutants. Yet the impact of these improvements on vehicle consumption has been limited by increased dynamic performances (maxi-mum speed, torque), increased safety (power steering and power brakes) and increased comfort (noise and vibration reduction, electric windows and thermal comfort). Because of this, the real CO{sub 2}-emission levels in vehicles is still high in a context where road transport is a major factor in the balance sheet of greenhouse gas emissions, thus in complying with the inter-national climate convention. Although European, Japanese and Korean manufacturers signed an important agreement with the European Commission for voluntarily reducing CO{sub 2} emissions from their vehicles, with a weighted average emission goal by sales of 140 grams per km on the MVEG approval cycle by 2008, it has to be noted that the European procedures for measuring fuel consumption and CO{sub 2} emissions do not take accessories into account, especially air-condition ng (A/C). The big dissemination of this equipment recognized as a big energy consumer and as using a refrigerant with a high global warming potential ed ADEME to implement a set of assessments of A/C's energy and environmental impact. In particular these assessments include studies of vehicle equipment rates, analyses of impact on fuel consumption as well as regulated pollutant emissions in the exhaust, a characterization of the refrigerant leakage levels and an estimate of greenhouse gas emissions for all air-conditioned vehicles. This leaflet summarizes the results of these actions. All of these studies and additional data are presented in greater detail in the document,-'Automobile Air-conditioning' (ADEME reference no. 4985). (author)

OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

Directory of Open Access Journals (Sweden)

Sujit Kumar Jha

2013-06-01

Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine. muffler, noise, vibration,modal analysis,

Heat rejection efficiency research of new energy automobile radiators

Science.gov (United States)

Ma, W. S.; Shen, W. X.; Zhang, L. W.

2018-03-01

The driving system of new energy vehicle has larger heat load than conventional engine. How to ensure the heat dissipation performance of the cooling system is the focus of the design of new energy vehicle thermal management system. In this paper, the heat dissipation efficiency of the radiator of the hybrid electric vehicle is taken as the research object, the heat dissipation efficiency of the radiator of the new energy vehicle is studied through the multi-working-condition enthalpy difference test. In this paper, the test method in the current standard QC/T 468-2010 “automobile radiator” is taken, but not limited to the test conditions specified in the standard, 5 types of automobile radiator are chosen, each of them is tested 20 times in simulated condition of different wind speed and engine inlet temperature. Finally, regression analysis is carried out for the test results, and regression equation describing the relationship of radiator heat dissipation heat dissipation efficiency air side flow rate cooling medium velocity and inlet air temperature is obtained, and the influence rule is systematically discussed.

The impact of internationalisation and rationalisation of production on the Spanish automobile industry, 1950 - 90

OpenAIRE

A Lagendijk

1995-01-01

The author examines the impact of the internationalisation of automobile production on the local production system in Spain, with emphasis on the relationship between the assembly and supply industries. After an introduction to the issue of linkage formation in the automobile industry, a historical overview of the development of the Spanish production system since the 1950s is presented. This is followed by an analysis of recent changes in the production and procurement strategies of internat...

Providing Consumers with Web-Based Information on the Environmental Effects of Automobiles

Energy Technology Data Exchange (ETDEWEB)

Saulsbury, J.W.

2003-08-25

The Department of Energy (DOE) and the Environmental Protection Agency (EPA) provide consumers with web-based information on the environmental effects of automobiles so that individuals can make informed choices about the vehicles they use or may purchase. DOE and EPA maintain a web site (www.fueleconomy.gov) that provides users with information about fuel economy [as well as greenhouse gas (GHG) emissions and air pollution emissions] for the cars and trucks they use or may consider purchasing. EPA also maintains a separate web site (www.epa.gov/greenvehicles) that offers similar information, with the focus on air pollution emissions rather than fuel economy. The American Council for an Energy-Efficient Economy (ACEEE) (www.greenercars.com) and the California Air Resources Board (CARB) (www.arb.ca.gov/msprog/ccbg/ccbg.htm) also maintain web sites that provide consumers with information on the environmental effects of automobiles. Through the National Transportation Research Center (NTRC) at Oak Ridge National Laboratory, DOE has supported some initial qualitative research with people who are interested in purchasing a new or used vehicle and whose actions identify them as at least somewhat concerned about the environment. The purpose of this research was to explore and understand how these people respond to the different ratings and measurements of environmental effects provided by the four web sites. The goal of the research is to optimize the communication of information provided on the DOE/EPA web site (www.fueleconomy.gov). Working with a private marketing research firm (The Looking Glass Group of Knoxville, Tennessee), NTRC staff initiated this research by meeting with two focus groups in Knoxville on February 27, 2001. To obtain information for comparison, staff from the NTRC and the Looking Glass Group also met with two focus groups in Los Angeles, California, on August 13, 2001.

Assessment of the Problems of Manual Automobile Tyre Bead ...

African Journals Online (AJOL)

The tyre-rim bead bond must be broken to carry out repairs on a failed automobile tyre. The use of the locally fabricated manual bead breaking equipment as it is being practiced today by commercial tyre repair artisans in Nigeria is characterized by drudgery. This article reports a study of the local manual bead breaking ...

Determinants of EDI (Electronic Data Interchange) Adoption and Integration in the US and Japanese Automobile Suppliers

OpenAIRE

Sam Kurokawa; Seiji Manabe

2002-01-01

This paper examines determinants of EDI adoption and integration in the US and Japanese automobile suppliers. The paper constructs several hypotheses based on the transaction-cost and resource- dependence approaches, and tests these hypotheses by using data from the automobile suppliers. Our study shows: (1) the resource-dependence approach seemed more effective in explaining EDI adoption, while the transaction-cost approach seemed more effective in explaining EDI integration; (2) the transac...

Reduced-Order Computational Model for Low-Frequency Dynamics of Automobiles

Directory of Open Access Journals (Sweden)

A. Arnoux

2013-01-01

Full Text Available A reduced-order model is constructed to predict, for the low-frequency range, the dynamical responses in the stiff parts of an automobile constituted of stiff and flexible parts. The vehicle has then many elastic modes in this range due to the presence of many flexible parts and equipment. A nonusual reduced-order model is introduced. The family of the elastic modes is not used and is replaced by an adapted vector basis of the admissible space of global displacements. Such a construction requires a decomposition of the domain of the structure in subdomains in order to control the spatial wave length of the global displacements. The fast marching method is used to carry out the subdomain decomposition. A probabilistic model of uncertainties is introduced. The parameters controlling the level of uncertainties are estimated solving a statistical inverse problem. The methodology is validated with a large computational model of an automobile.

Role of fin material and nanofluid in performance enhancement of automobile radiator

Science.gov (United States)

Jadar, Raju; Shashishekar, K. S.; Channa Keshava Naik, N.

2018-04-01

An effective cooling system can avoid engine and its components from overheating and helps in achieving optimum engine performance. This work deals with the fabrication and performance evaluation of an automobile radiator with i) Aluminum fins and ii) Al-MWCNT fins using 0.1 w/v% f-MWCNT nanofluid. F-MWCNT nanoparticles in the base fluid improves the rate of heat transfer in an automobile radiator integrated with Al-MWCNT fins. The enhancement of heat transfer mainly depends on the quantity of F-MWCNT nanoparticles added to the host fluid. During the study it was found that at a low weight by volume concentration of nanofluid the heat transfer enhancement of 8% was achieved using Al-MWCNT fins compared to base fluid.

Characteristics of motorcyclists involved in accidents between motorcycles and automobiles.

Science.gov (United States)

Oliveira, Amanda Lima de; Petroianu, Andy; Gonçalves, Dafne Maria Villar; Pereira, Gisele Araújo; Alberti, Luiz Ronaldo

2015-01-01

traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession) and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver's license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11) years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%). Of the motorcyclists who held a car driver's license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver's license for at least one year. among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

Six changes with the new Regulations on Automobile Loans

Institute of Scientific and Technical Information of China (English)

2004-01-01

<正> On Aug 16, 2004, the People’s Bank of China and China Banking Regulatory Commission (CBRC) jointly issued the new version of the Regulations on Automobile Loans. Due to be put into implementation on Oct 1, the new Regulations change radically compared with the previous version in terms of creditors, possible borrowers, rate of down payments, loan periods, etc.

New Technology and Human Resource Development in the Automobile Industry.

Science.gov (United States)

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

This document contains five case studies of plants within large enterprises in the automobile industry (Ford, Toyota, Volkswagen, Renault, and Volvo), plus reports of each company's views on human resource development, new technology, and changes in work organization and skill formation. The document is composed of five narrative sections,…

The automobile and maps in the integration of the Mexican territory, 1929-1962

Directory of Open Access Journals (Sweden)

Héctor Mendoza Vargas

2015-12-01

Full Text Available This article examines a new social geography opened by the use of the automobile and maps in the Mexican territory between 1929 and 1962. In this temporary scenery, the construction of roads during a considerable span of the 20th Century has been identified as part of the modernization plan of the revolutionary governments of Mexico. This infrastructure furnished the opportunity of getting to know the wide variety of landscapes of the country as never before. A set of new traveling experiences was offered to the middle class at the same time that such diversity of Mexican landscapes caused different emotions through the “pleasure” of ersonally contemplating the rivers, mountains, trees, vegetation, the sea, the hamlets, towns or cities. A central element of this perspective was occupied by the automobile; its presence in Mexico meant a cultural novelty with deep effects and changes in the Mexican society of the 20th Century. The new technological element worked as a new mechanism that started circulating by the roads to observe the landscape. Because of this, we propose the application of three key concepts of space analysis: the circulation territory, the visual territory and the experience territory. Each one of them represents the many sides of the landscape as one study object, and of geography interest, as described below. The territory of circulation came about when the railroads decline started in the twenties and consolidated in the sixties of the past century. That is why in this section we first place a comparative perspective of the motorization levels through the number of inhabitants per automobile in several Latin-American countries having available ordered historical statistics on the matter. Results show a long construction of the automobile culture in this geographic region; construction that incorporated new communication and evolution forms of social groups.

[The epidemiological study of work-related musculoskeletal disorders and related factors among automobile assembly workers].

Science.gov (United States)

Wang, Zhong-Xu; Qin, Ru-Li; Li, Yu-Zhen; Zhang, Xue-Yan; Jia, Ning; Zhang, Qiu-Ling; Li, Gang; Zhao, Jie; Li, Huan-Huan; Jiang, Hai-Qiang

2011-08-01

To investigate the work-related musculoskeletal disorders among automobile assembly workers, to discusses the related risk factors and their relationship. The selected 1508 automobile assembly workers from a north car manufacturing company were regarded as the study object. The hazard zone jobs checklist, Nordic musculoskeletal symptom questionnaire (NMQ) and pain questionnaire were used to perform the epidemiological cross-sectional and retrospective survey and study for the General status, awkward ergonomics factors and related influencing factors, and musculoskeletal disorders of workers. The predominant body sites of occurring WMSDs among automobile assembly workers were mainly low back, wrist, neck and shoulders, the predominant workshop section of occurring WMSDs were mostly concentrated in engine compartment, interior ornament, door cover, chassis and debugging section. The predominant body site of WMSDs among engine compartment and chassis section workers was low back, interior ornament workers were low back and wrist, door cover workers was wrist, chassis workers was low back, debugging workers were neck and low back. Neck musculoskeletal disorders had the trend with the increase of a body height; Smoking may increase the occurrence of musculoskeletal disorders. The WMSDs appears to be a serious ergonomic proble assem among automobile assembly workers, predominant occurring site of WMSDs is with different workshop section, its characteristics is quite obvious, probably related to its existing awkward work position or activities. The worker height and smoking habits may be important factors which affect musculoskeletal disorders happen.

Development of automobile brake lining using pulverized cow hooves

Directory of Open Access Journals (Sweden)

Katsina C. BALA

2016-06-01

Full Text Available Asbestos has been used for so long as automobile brake lining material because of its good physical and chemical properties. However, due to the health hazard associated with its handling, it has lost favour and several alternative materials are being increasingly used. Asbestos-free brake lining was developed in this work using pulverized cow hooves along with epoxy resin, barium sulphate, graphite and aluminium oxide. This was with a view to exploiting the characteristics of cow hooves, which are largely discarded as waste materials to replace asbestos which has been found to be carcinogenic. Samples of brake linings were produced using compressive moulding in which the physical and mechanical properties of the samples were studied. The results obtained showed that proper bonding was achieved as the percentage by weight of epoxy resin increased and percentage by weight of pulverized cow hooves decreased. The hardness, compressive strength, coefficient of friction, water and oil absorption, relative density and wear rate of the brake linings were determined and compared with existing brake lining properties. The result indicates that pulverized cow hooves can be used as brake lining material for automobiles.

EVOLUTIONS IN GLOBAL AUTOMOBILES INDUSTRY

Directory of Open Access Journals (Sweden)

Viorel Pop

2013-09-01

Full Text Available This paper is a brief overview of the evolution of the global automotive industry during the 20th century, with reference to the main manufacturers, oil crises of 1970-1980, and also the global financial and economic crisis that began in 2008. The analyzed period covers the rise of the Asian Continent, beginning with Japan, then South Korea and more recently the emerging countries: China and India. What was predicted 20-25 years ago, became reality: Asia becomes the economic centre of the world, surpassing unexpectedly fast even the Euro-Atlantic area. Regarding Romania, the revival delay of the automobiles industry, led to the loss of the trucks and bus industry, and after a much awaited rehabilitation of car production, this has stuck now at an unsatisfactory level.

Special-Purpose High-Torque Permanent-Magnet Motors

Science.gov (United States)

Doane, George B., III

1995-01-01

Permanent-magnet brushless motors that must provide high commanded torques and satisfy unusual heat-removal requirement are developed. Intended for use as thrust-vector-control actuators in large rocket engines. Techniques and concepts used to design improved motors for special terrestrial applications. Conceptual motor design calls for use of rotor containing latest high-energy-product rare-earth permanent magnets so that motor produces required torque while drawing smallest possible currents from power supply. Torque generated by electromagnetic interaction between stator and permanent magnets in rotor when associated electronic circuits applied appropriately temporally and spatially phased currents to stator windings. Phase relationships needed to produce commanded torque computed in response to torque command and to electronically sensed angular position of rotor relative to stator.

7 CFR 923.54 - Special purpose shipments.

Science.gov (United States)

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... conduct of marketing research and development projects established pursuant to § 923.45. (c) The committee... channels of trade for other than the specific purposes authorized by this section. Such rules, regulations...

Individualized solutions to environmental problems: a case of automobile pollution

Energy Technology Data Exchange (ETDEWEB)

Urmetzer, P.; Blake, D. E.; Guppy, N. [British Columbia Univ., Vancouver, BC (Canada)

1999-09-01

Air pollution associated with motor vehicle use is one of the prime indicators of the tension between consumerism and the environment. The use of private automobiles seems so convenient, whereas the alternatives are off-putting enough to make significant changes in personal transportation behaviour well-nigh impossible. At the same time, combating the air pollution associated with extensive use of cars has become one of the major policy objectives for cities around the world. Available policy alternatives can be divided into two categories: (1) incentives, such as improved public transportation, and (2) disincentives, such as environmental tax on gasoline. This paper attempt to directly assess links between these two alternatives, associated attitudes towards them, the level of public support for command and control (i.e. regulatory) policy approaches as well as for economic incentive/disincentive policies. Answers are sought and findings discussed relative to the link between opinions about the environment and support for different types of environmental policies, the usefulness of a rational choice perspective in explaining support for environmental policy alternatives, the role that partisan political attachments play in support of environmental policy approaches, and the roles played by environmental activism, knowledge, and action in shaping support for environmental policy alternatives. Overall results indicate that while most people living in urban environments support the ideas of environmental protection and would be willing to incur costs to confront the problem, exposure to air pollution plays an inconsequential (actually nearly non-existent) role in support of automobile-related environmental problems. Automobile users act like 'free-riders' i.e. they tend to support policies that socialize the cost of solutions rather than policies that attempt to pass the cost of pollution directly on to individual car owners. A sample of the responses to

Characteristics of motorcyclists involved in accidents between motorcycles and automobiles

Directory of Open Access Journals (Sweden)

Amanda Lima de Oliveira

2015-02-01

Full Text Available Introduction: traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. Objective: this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. Method: this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver’s license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. Results: of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11 years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%. Of the motorcyclists who held a car driver’s license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver’s license for at least one year. Conclusion: among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

76 FR 31467 - Guide Concerning Fuel Economy Advertising for New Automobiles

Science.gov (United States)

2011-06-01

... the Fuel Economy Guide \\1\\ in 1975 to prevent deceptive fuel economy advertising for new automobiles... Economy Guide. That rulemaking will increase the coverage of EPA's new fuel economy labels to include... issue to new vehicle advertisers in the FTC's Fuel Economy Guide. Therefore, the Commission has...

Premium Forecasting of an Insurance Company: Automobile Insurance

OpenAIRE

Fouladvand, M. Ebrahim; Darooneh, Amir H.

2002-01-01

We present an analytical study of an insurance company. We model the company's performance on a statistical basis and evaluate the predicted annual income of the company in terms of insurance parameters namely the premium, total number of the insured, average loss claims etc. We restrict ourselves to a single insurance class the so-called automobile insurance. We show the existence a crossover premium p_c below which the company is loss-making. Above p_c, we also give detailed statistical ana...

Public health, autonomous automobiles, and the rush to market.

Science.gov (United States)

Kelley, Ben

2017-05-01

The USA has the worst motor vehicle safety problem among high-income countries and is pressing forward with the development of autonomous automobiles to address it. Government guidance and regulation, still inadequate, will be critical to the safety of the public. The analysis of this public health problem in the USA reveals the key factors that will determine the benefits and risks of autonomous vehicles around the world.

A study of automobile exhaust noise preferences

Science.gov (United States)

Haire, Jay B.; Carney, Melinda J.; Cheenne, Dominique J.

2005-04-01

A study was conducted to investigate the relationship between preferences in automobile exhaust noise and the demographic factors of a listening jury. Noise samples of four different vehicles were recorded at idle as well as at 3000 RPM, and 1/3 octave sound spectra were acquired simultaneously. The recordings were presented to the jury using headphones and a preference survey was administered. Zwicker loudness was computed for all samples. Demographic factors such as gender, age, current and future vehicle ownership, were correlated to listening preferences, and unforeseen results were found, especially in regards to sport utility vehicles (SUV).

Study on the visibility of an electroluminescent display for automobiles; Jidoshayo EL display no shininsei

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, N; Harada, M; Idogaki, T [Denso Corp., Aichi (Japan)

1997-10-01

This report explores the visibility of an Electroluminescent (EL) display for automotive use. Displays for automobiles are exposed to the direct rays of the sun and forced to operate in wide temperature range. Therefore, luminous flux density by the lighting on EL display panel and operating environment temperature must be considered for the visibility evaluation. Sensory evaluation on the visibility and physical measurements such as contrast, chromaticity difference in accordance with the viewing angle change indicate that the visibility of the EL display for automobiles is advantageous over other displays. 6 refs., 11 figs., 1 tab.

High-speed rail with emerging automobiles and aircraft can reduce environmental impacts in California’s future

International Nuclear Information System (INIS)

Chester, Mikhail; Horvath, Arpad

2012-01-01

Sustainable mobility policy for long-distance transportation services should consider emerging automobiles and aircraft as well as infrastructure and supply chain life-cycle effects in the assessment of new high-speed rail systems. Using the California corridor, future automobiles, high-speed rail and aircraft long-distance travel are evaluated, considering emerging fuel-efficient vehicles, new train designs and the possibility that the region will meet renewable electricity goals. An attributional per passenger-kilometer-traveled life-cycle inventory is first developed including vehicle, infrastructure and energy production components. A consequential life-cycle impact assessment is then established to evaluate existing infrastructure expansion against the construction of a new high-speed rail system. The results show that when using the life-cycle assessment framework, greenhouse gas footprints increase significantly and human health and environmental damage potentials may be dominated by indirect and supply chain components. The environmental payback is most sensitive to the number of automobile trips shifted to high-speed rail, and for greenhouse gases is likely to occur in 20–30 years. A high-speed rail system that is deployed with state-of-the-art trains, electricity that has met renewable goals, and in a configuration that endorses high ridership will provide significant environmental benefits over existing modes. Opportunities exist for reducing the long-distance transportation footprint by incentivizing large automobile trip shifts, meeting clean electricity goals and reducing material production effects. (letter)

Automobile exhausts as a source for the environmental pollution by polychloro-dibenzodioxins and -dibenzofurans

International Nuclear Information System (INIS)

Ballschmiter, K.; Bacher, R.; Riehle, U.; Swerev, M.

1990-01-01

This research project was focussed on the analysis of polyhalogenated dibenzodioxins (''dioxins'') and dibenzofurans (''furans'') emitted through automobile exhausts (halogen = chlorine or bromine). High-resolution selective capillary gas chromatography coupled with mass-selective detection was used. The two compound groups show basic differences in pattern and concentrations for traffic-related samples. In the ''dioxin''-series the higher-chlorinated dibenzodioxins (increasing from Cl 4 to Cl 8 ) are preferentially found, in contrast to the ''furane'', present in higher amounts, for which the lower-halogenated dibenzofurans are more important (decreasing from Cl 1 to Cl 6 and from Br 1 to Br 4 ). The distribution of the dioxin- and furan isomers produced corresponds closely to the so-called ''2,6-type'' pattern which is due to a retarded oxidation and/or a stabilization of phenoxy-intermediates containing the 2,6- or 2,4,6-substitution pattern. To what extent a particular dioxin/furan immission is due to automobile-related emissions can, in the light of the present results, be estimated only by taking several factors into account; source remoteness, the predominance of brominated or partly brominated dibenzofurans over the chlorinated congeners, the presence of other, also halogenated, polycyclic aromatics related to the automobile combustion engine. Areas close to traffic are primarily or completely influenced by the ''dioxin''-emissions of automobiles. For the calculation of the toxic equivalents (TE) for traffic-related emissions, the most important of the ''2,3,7,8''-substituted congeners are the furans 2,3,7,8-Cl 4 DF (F 83) and 2,3,4,7,8-Cl 5 DF (F 114) as well as the dioxins 1,2,3,4,6,7,8-Cl 7 DD (D 73) and octachlorodibenzodioxin (D-75). (orig.) [de

Some questions of using the algebraic coding theory for construction of special-purpose processors in high energy physics spectrometers

International Nuclear Information System (INIS)

Nikityuk, N.M.

1989-01-01

The results of investigations of using the algebraic coding theory for the creation of parallel encoders, majority coincidence schemes and coordinate processors for the first and second trigger levels are described. Concrete examples of calculation and structure of special-purpose processor using the table arithmetic method are given for multiplicity t ≤ 5. The question of using parallel and sequential syndrome coding methods for the registration of events with clusters is discussed. 30 refs.; 10 figs

Optimization of a parity of brake forces of automobiles in view of a bias of road

International Nuclear Information System (INIS)

Davlatshoev, R.A.; Tursunov, A.A.

2006-01-01

In clause it is shown a method optimization of brake of forces in view of a bias road it is established, that in mountain conditions of loss of coupling weight of automobiles than 2-3 times concerning flat conditions therma are more. The degree of use of coupling weight in result use of a regulator of brake forces very much increases also efficiency of brake systems such a kind of automobiles is provided with definition of optimum factor of coupling at which value of loss of coupling weight is provided minimal

The Swiss automobile industry - Situation, structure, trends, challenges and chances; Automobilindustrie Schweiz. Branchenanalyse 2008

Energy Technology Data Exchange (ETDEWEB)

Schulze, A.

2008-07-01

This paper presented at the Swiss 2008 research conference on traffic takes a look at the situation of the Swiss automobile industry in 2008. The results of the study are presented and include figures on the automobile industry, its history, structure, turn-over, employment and its position from the international point of view. Research and development in the sector, investments and challenges faced are discussed. The products and services offered are looked at and the relevant strategies examined. The sector's competitive environment and possibilities for growth are looked at and the advantages offered by strategic partnerships and geographical location are noted. Finally, interviews with important actors in the business are presented.

Efficient using of automobile transport for the deep open-pit mines

OpenAIRE

Dastan MAHAMBETOV; Bayan RAKISHEV; Galymzhan SAMENOV; Aleksander SŁADKOWSKI

2013-01-01

In the paper the method is proposed of substantiation of the major parameters for zones of effective use of automobile transport of different load-carrying capacity by open cast development of the deep deposits. An efficient ratio is determined between the mining and transport equipment by zone-to -zone use.

7 CFR 215.1 - General purpose and scope.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 215.1 Section 215.1... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This part announces the policies and prescribes the general regulations with respect to the Special Milk...

On the contribution of polycyclic aromatic hydrocarbons to the carcinogenic impact of automobile exhaust condensate evaluated by local application onto mouse skin.

Science.gov (United States)

Grimmer, G; Brune, H; Deutsch-Wenzel, R; Naujack, K W; Misfeld, J; Timm, J

1983-11-01

The objective of this investigation was to identify the substances chiefly responsible for the carcinogenicity of automobile exhaust condensate using topical application onto the skin of mice. This was performed by comparing the carcinogenic effect of various fractions with that of an unseparated sample of automobile exhaust condensate, tested in 3 different doses. The probit and Weibull analysis of the result shows: (a) The condensate, emitted from a gasoline-driven automobile provokes local tumors after long-term application to the dorsal skin of mice. The tumor incidence demonstrates a clear cut dose-response relationship. (b) The fraction of polycyclic aromatic hydrocarbons (PAH) containing more than 3 rings accounts for about 84-91% of the total carcinogenicity of automobile exhaust condensate. This fraction represents only about 3.5% by wt of the condensate. (c) The content of benzo[a]pyrene (BaP) (0.414 mg/g) accounts for 6-7.6% of the total carcinogenicity of automobile exhaust condensate, 15 selected PAHs for about 41%. (d) Regarding the minor effect of the PAH-free fraction (about 83% by wt), no hints for a cocarcinogenic activity were observed.

Dynamic interaction between markets for leasing and selling automobiles

OpenAIRE

Andrikopoulos, Athanasios; Markellos, Raphael N.

2015-01-01

We develop a model of dynamic interactions between price variations in leasing and selling markets for automobiles. Our framework assumes a differential game between multiple Bertrand-type competing firms which offer differentiated products to forward-looking agents. Empirical analysis of our model using monthly US data from 2002 to 2011 shows that variations in selling (cash) market prices lead rapidly dissipating changes of leasing market prices in the opposite direction. We discuss the pra...

Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

NARCIS (Netherlands)

Ende, D.A. van den; Wiel, H.J. van de; Groen, W.A.; Zwaag, S. van der

2012-01-01

Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

Direct strain energy harvesting in automobile tires using piezoelectric PZT–polymer composites

NARCIS (Netherlands)

Van den Ende, D.A.; Van de Wiel, H.J.; Groen, W.A.; Van der Zwaag, S.

2011-01-01

Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

Integration of Bass Enhancement and Active Noise Control System in Automobile Cabin

Directory of Open Access Journals (Sweden)

Liang Wang

2008-01-01

Full Text Available With the advancement of digital signal processing technologies, consumers are more concerned with the quality of multimedia entertainment in automobiles. In order to meet this demand, an audio enhancement system is needed to improve bass reproduction and cancel engine noise in the cabins. This paper presents an integrated active noise control system that is based on frequency-sampling filters to track and extract the bass information from the audio signal, and a multifrequency active noise equalizer to tune the low-frequency engine harmonics to enhance the bass reproduction. In the noise cancellation mode, a maximum of 3 dB bass enhancement can be achieved with significant noise suppression, while higher bass enhancement can be achieved in the bass enhance mode. The results show that the proposed system is effective for solving both the bass audio reproduction and the noise control problems in automobile cabins.

The Effect of the Arab Boycott on Israel : The Automobile Market

NARCIS (Netherlands)

Fershtman, C.; Gandal, N.

1996-01-01

Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel.This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market.In this paper, we examine the

Application of food irradiation technology in development of future special purposed foods

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Shin, Myung Gon [Woosong University, Daejeon (Korea, Republic of); Lee, Ju Woon [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

2010-06-15

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry.

Application of food irradiation technology in development of future special purposed foods

International Nuclear Information System (INIS)

Byun, Myung Woo; Shin, Myung Gon; Lee, Ju Woon

2010-01-01

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry

Automobile diesel exhaust particles induce lipid droplet formation in macrophages in vitro

DEFF Research Database (Denmark)

Cao, Yi; Jantzen, Kim; Gouveia, Ana Cecilia Damiao

2015-01-01

Exposure to diesel exhaust particles (DEP) has been associated with adverse cardiopulmonary health effects, which may be related to dysregulation of lipid metabolism and formation of macrophage foam cells. In this study, THP-1 derived macrophages were exposed to an automobile generated DEP (A...

Information, complexity and efficiency: The automobile model

Energy Technology Data Exchange (ETDEWEB)

Allenby, B. [Lucent Technologies (United States)]|[Lawrence Livermore National Lab., CA (United States)

1996-08-08

The new, rapidly evolving field of industrial ecology - the objective, multidisciplinary study of industrial and economic systems and their linkages with fundamental natural systems - provides strong ground for believing that a more environmentally and economically efficient economy will be more information intensive and complex. Information and intellectual capital will be substituted for the more traditional inputs of materials and energy in producing a desirable, yet sustainable, quality of life. While at this point this remains a strong hypothesis, the evolution of the automobile industry can be used to illustrate how such substitution may, in fact, already be occurring in an environmentally and economically critical sector.

V-TECS Guide for Automobile Air Conditioning and Electrical System Technician.

Science.gov (United States)

Meyer, Calvin F.; Benson, Robert T.

This curriculum guide provides an outline for an eight-unit course to train automobile air conditioning and electrical system technicians. Each unit focuses on a duty that is composed of a number of performance objectives. For each objective, these materials are provided: a task, a standard of performance of task, source of standard, conditions…

VISUALIZATION OF MEMS STRUCTURES FOR EDUCATION OF AUTOMOBILE MICROSYSTEMS

Directory of Open Access Journals (Sweden)

Slavomír KARDOŠ

2017-09-01

Full Text Available The work is aimed at visualization of working principles of microelectromechanical sensors which are used in automobile electronic systems. Attention is paid to accelerometric, inclinometric, pressure and MAF devices. These are used in systems for stability control, passive and active safety as well as comfort management. The visualizations were realized using modern animation techniques initiated by the creation of virtual materials, 2D and 3D objects, through scene exposure, pending their animation and final cutting.

7 CFR 762.121 - Loan purposes.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Loan purposes. 762.121 Section 762.121 Agriculture... SPECIAL PROGRAMS GUARANTEED FARM LOANS § 762.121 Loan purposes. (a) Operating Loan purposes. (1) Loan... the need to refinance; (viii) Payment of loan closing costs; (ix) Payment of costs associated with...

Perspectives of Biogas Conversion into Bio-CNG for Automobile Fuel in Bangladesh

Directory of Open Access Journals (Sweden)

M. S. Shah

2017-01-01

Full Text Available The need for liquid and gaseous fuel for transportation application is growing very fast. This high consumption trend causes swift exhaustion of fossil fuel reserve as well as severe environment pollution. Biogas can be converted into various renewable automobile fuels such as bio-CNG, syngas, gasoline, and liquefied biogas. However, bio-CNG, a compressed biogas with high methane content, can be a promising candidate as vehicle fuel in replacement of conventional fuel to resolve this problem. This paper presents an overview of available liquid and gaseous fuel commonly used as transportation fuel in Bangladesh. The paper also illustrates the potential of bio-CNG conversion from biogas in Bangladesh. It is estimated that, in the fiscal year 2012-2013, the country had about 7.6775 billion m3 biogas potential equivalent to 5.088 billion m3 of bio-CNG. Bio-CNG is competitive to the conventional automobile fuels in terms of its properties, economy, and emission.

Development of Proportional Pressure Control Valve for Hydraulic Braking Actuator of Automobile ABS

Directory of Open Access Journals (Sweden)

Che-Pin Chen

2018-04-01

Full Text Available This research developed a novel proportional pressure control valve for an automobile hydraulic braking actuator. It also analyzed and simulated solenoid force of the control valves, and the pressure relief capability test of electromagnetic thrust with the proportional valve body. Considering the high controllability and ease of production, the driver of this proportional valve was designed with a small volume and powerful solenoid force to control braking pressure and flow. Since the proportional valve can have closed-loop control, the proportional valve can replace a conventional solenoid valve in current brake actuators. With the proportional valve controlling braking and pressure relief mode, it can narrow the space of hydraulic braking actuator, and precisely control braking force to achieve safety objectives. Finally, the proposed novel proportional pressure control valve of an automobile hydraulic braking actuator was implemented and verified experimentally.

Addressing Climate Change at the State and Local Level: Using Land Use Controls to Reduce Automobile Emissions

Directory of Open Access Journals (Sweden)

Rachel Medina

2010-06-01

Full Text Available Automobiles are a major source of CO2 emissions. Because there is no immediate technological fix to reduce these emissions, the most promising current strategy is to promote less automobile use. In the United States, this is difficult because federal programs such as the interstate highway system and local land use planning and regulation have encouraged suburban sprawl. In 2006, the state of California passed legislation to roll back greenhouse emissions to 1990 levels by 2020. This legislation did not link the roll back target with land use policies. However, NGOs and the state Attorney General used the state’s pre-existing environmental impact assessment act to sue a large county east of Los Angeles alleging that its revised land use plan was inconsistent with the 2006 legislation. The state and the county settled the suit after the county agreed to new greenhouse gas mitigation duties, and in 2008 California passed additional legislation to implement its 2006 statute. Communities are strongly encouraged to adopt compact, transit-oriented development strategies to limit automobile use. The new legislation gives the attorney general and NGOs additional legal authority to challenge local land use plans and regulatory decisions which fail to adopt these strategies. California’s important experiment has lessons for all urban areas struggling to reduce automobile CO2 emissions. It suggests that local land use controls can be added to the list of workable greenhouse gas mitigation strategies.

Mathematical and numerical models to achieve high speed with special-purpose parallel processors

International Nuclear Information System (INIS)

Cheng, H.S.; Wulff, W.; Mallen, A.N.

1986-01-01

Historically, safety analyses and plant dynamic simulations have been and still are being carried out be means of detailed FORTRAN codes on expensive mainframe computers in time-consuming batch processing mode. These codes have grown to be so expensive to execute that their utilization depends increasingly on the availability of very expensive supercomputers. Thus, advanced technology for high-speed, low-cost, and accurate plant dynamic simulations is very much needed. Ideally, a low-cost facility based on a modern minicomputer can be dedicated to the staff of a power plant, which is easy and convenient to use, and which can simulate realistically plant transients at faster than real-time speeds. Such a simulation capability can enhance safety and plant utilization. One such simulation facility that has been developed is the Brookhaven National Laboratory (BNL) Plant Analyzer, currently set up for boiling water reactor plant simulations at up to seven times faster than real-time process speeds. The principal hardware components of the BNL Plant Analyzer are two units of special-purpose parallel processors, the AD10 of Applied Dynamics International and a PDP-11/34 host computer

Success of Saturn: A Case Study of the Saturn Automobile

Science.gov (United States)

1993-04-01

speed in production with nearly 20,000 cars per month coming off the assembly line.133 MARKETING THE PRODUCT ADVERTISING STRATEGY Saturn’s approach to...Satisfaction Index.𔄁 5 In the Sales Satisfaction category Saturn finished sixth behind Lexus, Cadillac, Infiniti, Lincoln and Mercedes Benz , all...quality, inexpensive, fuel efficient automobiles. They put their cars on the market in the U.S. and Americans bought Japanese instead of expensive

The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

Directory of Open Access Journals (Sweden)

linhua Pang

2015-01-01

Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

In-house Integration Model in the Indian Automobile Industry

OpenAIRE

Tachiki, Dennis S.

2012-01-01

　Since the mid―1980s, Indian automobile companies have been upgrading their technological knowhow to competitively respond to an increasing demand for higher value-added components from domestic and global assemblers. According to the Automotive Component Manufacturers Association of India (ACMA), the auto component market in India should grow at a CARG (compounded annual growth rate) of 11.7 per cent between 2011 and 2015, and the export market at a robust CARG of 18 per cent between 2011 a...

An efficiency analysis of modern and perspective methods and facilities to reduce of the automobile transport exhaust gases

Directory of Open Access Journals (Sweden)

Володимир Петрович Юдін

2015-09-01

Full Text Available The article studies the degree of atmosphere pollution with automobile transport exhaust gases, the evolution of their rating in the European Union, and the reasons why Ukrainian automobile transport exhaust gases lag behind in meeting emission standards. Constructive, organizational, and regulating techniques aimed at reducing the amount of exhaust gases are analyzed; non-standard propositions concerning cooperation of motor vehicle owners and regulatory authorities are offered; the examples of successful practices employed in Zaporizhia region are given

An Exploratory Study on Implementation of Lean Manufacturing Practices(With Special Reference to Automobile Sector Industry(Yalın İmalat Faaliyetine Yönelik Bir Uygulama (Otomobil Endüstrisi Örneği

Directory of Open Access Journals (Sweden)

Er. Rajesh Kumar MEHTA

2012-01-01

Full Text Available At present scenario, Lean Manufacturing has become a world wide phenomenon. It is quite successful in drawing the attention of companies of all sizes. A large number of organizations are following Lean technologies and experiencing vast improvements in quality, production, customer service, and profitability. Lean Manufacturing is a systematic approach to identifying and eliminating waste through continuous improvement. The manufacturing industry in India must also look to leverage its advantages, its large domestic market, good conditions in terms of raw materials and skilled labour, and the quality focus. In India at the state level, there are few companies that are implementing Lean manufacturing techniques. In Dewas city, the industrial town of Madhya Pradesh, some of the automobile companies are vigorously following the Lean manufacturing techniques to eliminate waste and downsize the cost. Hence, all these factors prompted the researchers to analyze and study the implication of Lean Manufacturing Practices in Automobile Industries.

Demands made on high-purity copper for special purposes

International Nuclear Information System (INIS)

Roettges, D.

1977-01-01

The properties (electrical resistivity, residual impurities) of high-purity copper produced on a technical scale are reported as well as its practical applications. The paper discusses a high-oxygen copper (SV) with low residual resistivity at low temperatures and an oxygen-free (hydrogen-stable) copper (BE electronic) with low gas content. The SV quality has been specially developed for use as stabilizer in superconductors while the BE quality is used in high and ultrahigh vacuum. (GSC) [de

Simulations of diocotron instability using a special-purpose computer, MDGRAPE-2

International Nuclear Information System (INIS)

Yatsuyanagi, Yuichi; Kiwamoto, Yasuhito; Ebisuzaki, Toshikazu; Hatori, Tadatsugu; Kato, Tomokazu

2003-01-01

The diocotron instability in a low-density non-neutral electron plasma is examined via numerical simulations. For the simulations, a current-vortex filament model and a special-purpose computer, MDGRAPE-2 are used. In the previous work, a simulation method based on the current-vortex filament model, which is called 'current-vortex method', is developed. It is assumed that electric current and vorticity have discontinuous filamentary distributions, and both point electric current and point vortex are confined in a filament, which is called 'current-vortex filament'. In this paper, the current-vortex method with no electric current is applied to simulations of the non-neutral electron plasma. This is equivalent to the traditional point-vortex method. MDGRAPE-2 was originally designed for molecular dynamics simulations. It accelerates calculations of the Coulomb interactions, the van der Waals interactions and so on. It can also be used to accelerate calculations of the Biot-Savart integral. The diocotron modes reproduced by the simulations agree with the result predicted by linear theory. This indicates that the current-vortex method is applicable to problems of the non-neutral plasma. The linear growth rates of the diocotron instability in the simulations also agree with the theoretical ones. This implies that MDGRAPE-2 gives the sufficiently accurate results for the calculations of the current-vortex method. A mechanism of merging of electron clumps is demonstrated by the simulations. It is concluded that the electric field induced by the conducting wall makes the nonlinear stage unstable and causes the clumps to merge

Special purpose materials: an assessment of needs and the role of these materials in the national program

International Nuclear Information System (INIS)

Gold, R.E.; Clinard, F.W. Jr.; Davis, J.W.

1978-01-01

The scope of activities of the Task Group on Special Purpose Materials includes those materials requirements not specifically addressed by the other OFE materials task groups. These materials can be organized according to seven broad materials applications or functions which appear to be generic to all magnetically confined fusion reactor concepts. These are breeding materials, coolants, materials for tritium service, graphite and silicon carbide, electrical insulators and ceramics, heat-sink materials, and magnet materials. The present paper describes the importance of each of these areas of materials technology, outlines major problems or areas of uncertainty, and reviews past and current contributions to our state of understanding as it may relate to fusion power applications

Special Needs Assistants--The Special Characteristic and Strength of the School System of Finland

Science.gov (United States)

Mäensivu, Kati-Tuulia; Uusiautti, Satu; Määttä, Kaarina

2012-01-01

The contribution of special needs assistants (SNA) is becoming increasingly important in inclusive and special classrooms. However, the profession itself has remained unexplored. The purpose of this article is to describe special needs assistants' perceptions on their education, professional competence, the content and significance of their work…

Automobiles and global warming: Alternative fuels and other options for carbon dioxide emissions reduction

International Nuclear Information System (INIS)

Sagar, A.D.

1995-01-01

Automobiles are a source of considerable pollution at the global level, including a significant fraction of the total greenhouse gas emissions. Alternative fuels have received some attention as potential options to curtail the carbon dioxide emissions from motor vehicles. This article discusses the feasibility and desirability (from a technical as well as a broader environmental perspective) of the large-scale production and use of alternative fuels as a strategy to mitigate automotive carbon dioxide emissions. Other options such as improving vehicle efficiency and switching to more efficient modes of passenger transportation are also discussed. These latter options offer an effective and immediate way to tackle the greenhouse and other pollutant emission from automobiles, especially as the limitations of currently available alternative fuels and the technological and other constraints for potential future alternatives are revealed

Measuring the environmental impacts and sustainability of automobiles

Energy Technology Data Exchange (ETDEWEB)

Lave, L B; Cobas Flores, E; McMichael, F C; Hendrickson, C T; Horvath, A; Joshi, S [Carnegie Mellon Univ., Pittsburgh, PA (United States)

1996-11-01

In the paper the following topics are discussed: - the need for public education and involvement in the decision process, - the difficulty of defining sustainability, - the occasional difference between the goals of sustainability and environmental quality, - the need for life cycle analysis to analyze the sustainability and environmental quality implications of a product, process, or material. The importance of environmental input-output analysis is stressed. This new tool can provide the life cycle information cheaply, quickly, and with much less uncertainty. Examples are presented for making an automobile, a seat out of plastic or aluminium, and an electric vehicle. (author) 4 tabs., refs.

Levels of polybrominated diphenyl ethers (PBDEs) in dust from personal automobiles in conjunction with studies on the photochemical degradation of decabromodiphenyl ether (BDE-209).

Science.gov (United States)

Lagalante, Anthony F; Shedden, Courtney S; Greenbacker, Peter W

2011-07-01

The levels of 21 PBDE congeners were detemined in the dust sampled from 66 personal automobiles. The dominant congener in automobile dust was BDE-209 with a median level of 8.12 μg g⁻¹. Personal vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE and DecaBDE commercial formulations. Levels of PBDEs in personal automobiles are generally reduced in comparison to our previously reported levels in resale vehicles on dealership lots presumably due to a dilution effect introduced by dust or debris that does not originate from the vehicle. Laboratory photochemical studies were conducted on both automobile dust collected from personal vehicles as well as BDE-209 adsorbed to sodium sulfate. No significant degradation occurred in the personal vehicle dust after 56 days of constant UVA irradiation while significant degradation did occur with BDE-209 adsorbed to sodium sulfate. PBDEs from the degradation of BDE-209 were identified and potential degradation pathways elucidated. Human exposure potential to PBDEs from automobile dust ingestion remains a serious concern in the U.S. population. Copyright © 2011 Elsevier Ltd. All rights reserved.

Use of high dose irradiation for development of special purposed foods

International Nuclear Information System (INIS)

Yoon, Yohan; Lee, Ju-Woon

2009-01-01

Full text: FAO/WHO Food Safety Committee indicated that food borne disease is one of the most widespread threats to human health and is ever increasing, which requires a national measure against the problems in public health and consequent economic productivity. The increasing demand for convenient foods as well as safer foods needs new technologies with potentials to solve or complement the limitations of existing methods for preserving and improving the food quality and safety. There are various techniques for preserving foods, most of which have problems in terms of effectiveness, quality, safety, economic feasibility, and environmental impact. Food irradiation has been studied more extensively and scientifically than any other food processing technologies. It is a physical method for food treatment comparable to heat pasteurization, canning or freezing. The process involves exposing foods, either packaged or in bulk, to one of three types of ionizing energy: gamma rays, machine-generated electrons or X-rays. Food irradiation is a promising food safety technology that can eliminate spoilage and pathogens from foods. However, low consumer acceptance of irradiated foods has been become an obstacle to make food irradiation technology as widely accepted method. Thus, use of the technology in development of special-purposed foods should be a first step to make irradiation technology as a common decontamination method in food industry. Korea Atomic Energy Research Institute (KAERI) has used irradiation technology to develop space foods for astronauts, and four Korean foods (Kimchi: fermented vegetable, Ramen: ready-to-cook noodles, Saengshik bar: raw grain bar, Sujeonggwa: cinnamon beverage) were certificated by Institute of Biomedical Problems, followed by sensory and quality evaluation in International Space Stations. With this previous research experience, KAERI has researched on development of patient foods and military rations. Hospital patients are a special

Achievement report on the research on possibility of expanding application of information technology to automobile production line; Jidosha seisan kotei eno joho tsushin gijutsu tekiyo kakudai kanosei ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Before submitting propositions on important technological tasks to be generated in the automobile production line upon application of IT (information technology), a questionnairing is implemented to know the actualities of the line for the purpose of planning a proper merger of IT and the manufacturing technology development capability of the IT accepting site. The questionnaire, aiming at the embodiment of the goals of the projects 'IT related technical tasks relative to its helping human creation of new technologies and enhancement of human ability to make improvement' and 'Technical tasks of developing technical skills into technologies,' asks engineers about the actualities of knowhow at automobile production lines and its development into technologies, about how they take care of what they learned from their predecessors, and about their expectations from and views and opinions toward IT introduction and utilization. It is important to efficiently utilize IT as a means to solve problems involving the knowhow related training on the production line and the handing down of the acquired knowhow to the juniors. Since individual workers' knowhow assumes a certain role at each stage of the automobile production line and since it is necessary to extract the maximum from each worker and to utilize the fruit for improvement on productivity and work efficiency, it is indispensable to efficiently merge the knowhow with IT. (NEDO)

Estimation of exposed radiation dose in radiography of the chest. Mainly on the dose at health examination on automobiles

International Nuclear Information System (INIS)

Suzuki, Shoichi; Oda, Akiko; Ohkura, Masaki

1998-01-01

The exposure doses in radiography and photofluorography of the chest at health examination on automobiles were estimated and compared with those using other hospital equipments. The tube voltage, effective energy and half value layer under ordinary conditions for radiography and fluorography were measured by KYOKKO model 100 X-ray analyzer and output pulse shape was confirmed by the fluorometer (TOREKEY-1001 C). The dose at the body surface was measured by the ionization chambers (VICTOREEN RADCON 500 and 30-330) which had been equipped in the WAC chest phantom (JIS Z 4915, Kyoto Kagaku). Nine automobiles of 3 facilities were used, of which X-ray generating apparatuses of either condenser or inverter type were manufactured by Hitachi (5 machines), Toshiba (1) and Shimadzu (3). The examined apparatuses not for the automobile were Toshiba-20 and Hitachi SIRIUS-100 portable ones and Hitachi DH-1520 TM high-voltage one. The effective energy was found dependent on the tube voltage (100-130 kV) and X-ray generating system (35.1-54.37 keV in the condenser type and 41.1-43.9 keV in the inverter type). Pulse shape analysis revealed that the pulse height and area under the pulse height-time curve were larger in the inverter system. The mean doses in photofluorography and radiography on automobiles were 0.525 and 0.297 mGy, respectively. The mean dose of 0.61 mGy in radiography at home with the portable apparatus was the highest even when compared with that of 0.525 mGy for fluorography on the automobile. Thus, the inverter system on the car can guarantee the level of 0.4 mGy defined by IAEA guideline (Safety series No. 115, 1996). (K.H.)

Life cycle models of conventional and alternative-fueled automobiles

Science.gov (United States)

Maclean, Heather Louise

This thesis reports life cycle inventories of internal combustion engine automobiles with feasible near term fuel/engine combinations. These combinations include unleaded gasoline, California Phase 2 Reformulated Gasoline, alcohol and gasoline blends (85 percent methanol or ethanol combined with 15 percent gasoline), and compressed natural gas in spark ignition direct and indirect injection engines. Additionally, I consider neat methanol and neat ethanol in spark ignition direct injection engines and diesel fuel in compression ignition direct and indirect injection engines. I investigate the potential of the above options to have a lower environmental impact than conventional gasoline-fueled automobiles, while still retaining comparable pricing and consumer benefits. More broadly, the objective is to assess whether the use of any of the alternative systems will help to lead to the goal of a more sustainable personal transportation system. The principal tool is the Economic Input-Output Life Cycle Analysis model which includes inventories of economic data, environmental discharges, and resource use. I develop a life cycle assessment framework to assemble the array of data generated by the model into three aggregate assessment parameters; economics, externalities, and vehicle attributes. The first step is to develop a set of 'comparable cars' with the alternative fuel/engine combinations, based on characteristics of a conventional 1998 gasoline-fueled Ford Taurus sedan, the baseline vehicle for the analyses. I calculate the assessment parameters assuming that these comparable cars can attain the potential thermal efficiencies estimated by experts for each fuel/engine combination. To a first approximation, there are no significant differences in the assessment parameters for the vehicle manufacture, service, fixed costs, and the end-of-life for any of the options. However, there are differences in the vehicle operation life cycle components and the state of technology

Dissolution kinetics of Pd and Pt from automobile catalysts by naturally occurring complexing agents

Czech Academy of Sciences Publication Activity Database

Šebek, O.; Mihaljevič, M.; Strnad, L.; Ettler, V.; Ježek, J.; Štědrý, R.; Drahota, P.; Ackerman, Lukáš; Adamec, V.

2011-01-01

Roč. 198, December (2011), s. 331-339 ISSN 0304-3894 Institutional research plan: CEZ:AV0Z30130516 Keywords : automobile catalyst * Platinum group elements * mobilisation * leaching * kinetic Subject RIV: DD - Geochemistry Impact factor: 4.173, year: 2011

Ratio analysis and Piotroski scoring system in the automobile industry in Croatia

Directory of Open Access Journals (Sweden)

Morana Mesarić

2014-10-01

Full Text Available To gain insight into operational efficiency, sustainable profitability, the ability to fulfil commitments, use of funds borrowed or investment risk or operational self-sufficiency, it is necessary to conduct analyses of financial statements usually known as ratio analysis. The paper provides analyses of five Croatian general distributors of the automobile industry. Ratios used in the analyses are those used in the Piotroski f-scoring analyses, which are famous for assessing financial capacities of enterprises on the stock exchange market. Based on ratios used in Piotroski scoring systems the assessment of five enterprises, as well as the sector as a whole was carried out. The analysis covers the period 2007-2012. That is the period of the rise, falling and recovery of the automotive industry throughout the world as well as the rise, falling and recession of the whole economy including the automobile market. In general, the sector itself is financially unstable and consequently risk exposed. Results are used for preliminary analyses and prediction of the future financial strength of the auto industry in Croatia.

Creating a One-Stop-Shop for Automobile Solutions in Kolkata, India.

OpenAIRE

Kanoria, Shrivardhan

2009-01-01

This is a research lead business plan concerning making a one-stop-shop for automobile solutions in Kolkata, India, containing three elements of business. Firstly, it would involve restoration, buying and selling of vintage and classic cars. Secondly, it would contain modern car customisation. Thirdly, it would contain modern car servicing, buying and selling. These would be the core activities, having associates non core businesses as well.

Teamwork in the Automobile Industry Ð An Anglo-German Comparison

OpenAIRE

Niels-Erik Wergin

2003-01-01

Teamwork in the automotive industry varies significantly from plant to plant. This article compares teamwork in four automobile plants in Germany and Britain, and addresses two questions: (1) Do different models of teamwork fit into a bi-polar model of teamwork, being either innovative or structural conservative? (2) Do current models of teamwork signify a development towards post-fordism, or are they merely part of a neo-fordist rationalisation of production? The following answers are sugges...

Automobile inspection system based on wireless communication

Science.gov (United States)

Miao, Changyun; Ye, Chunqing

2010-07-01

This paper aims to research the Automobile Inspection System based on Wireless Communication, and suggests an overall design scheme which uses GPS for speed detection and Bluetooth and GPRS for communication. The communication between PDA and PC was realized by means of GPRS and TCP/IP; and the hardware circuit and software for detection terminal were devised by means of JINOU-3264 Bluetooth Module after analyzing the Bluetooth and its communication protocol. According to the results of debugging test, this system accomplished GPRS based data communication and management as well as the real-time detection on auto safety performance parameters in crash test via PC, whereby the need for mobility and reliability was met and the efficiency and level of detection was improved.

Radionuclide technology applications in development and production in the automobile industry

International Nuclear Information System (INIS)

Sailer, S.

1982-01-01

Radionuclide technology (RNT) is utilized for air-engineering measurements. The spheres of interest here are the magnitude of the air flow and its spatial distribution in the interior of passenger cars, truck cabs and buses. For this purpose the air inside the vehicle is marked with 85 Kr, and the decrease in activity is measured at various driving speeds simulated in a wind tunnel. Oil consumption measurements with tritium-marked motor oil are used primarily to optimize new engines in terms of design (e.g. piston-ring components, type of lubrication), materials and lubricants. For this purpose the oil consumption is measured under various engine operating conditions (oil-consumption performance graph). The oil consumption of the individual cylinders can also be measured. The effect of production technologies (e.g. form and surface perfection) on oil consumption is important for improving production. The radionuclide technique most often used in the automobile industry is for the measurement of wear. The focal point here is the optimization of tribological systems in the development of engines, transmissions etc., studying the influence of design, materials and lubricants and determining the operating conditions which are critical for wear. Important information regarding the influence of production technologies on wear can be gained for production. In addition, considerable savings and higher quality can be realized in production by optimization of engine run-in programmes with RNT. The common factors for all RNT processes mentioned are that, compared with conventional measuring procedures, they are more precise, require shorter testing times, and can be performed under normal operating conditions. The prerequisites are careful selection of the applications and continual optimization of measurement technology. (author)

75 FR 72965 - Federal Travel Regulation; Removal of Privately Owned Vehicle Rates; Privately Owned Automobile...

Science.gov (United States)

2010-11-29

... rate based on the type of POV you actually use (privately owned airplane, privately owned automobile... HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) 0 29. The authority citation for 41...

DETECTION RELEVANCY OF SOME FACTORS INFLUENCING ON AIR POLLUTION FROM AUTOMOBILE AND ROAD COMPLEX

Directory of Open Access Journals (Sweden)

Radkevich, M.

2013-01-01

Full Text Available The dependence between the pavement evenness and the emissions of air pollutants from automobile – road sector is detected. It is proposed to take the pavement evenness for the assessment criterion of greenhouse and other gases emissions.

Specialized languages

DEFF Research Database (Denmark)

Mousten, Birthe; Laursen, Anne Lise

2016-01-01

Across different fields of research, one feature is often overlooked: the use of language for specialized purposes (LSP) as a cross-discipline. Mastering cross-disciplinarity is the precondition for communicating detailed results within any field. Researchers in specialized languages work cross...... science fields communicate their findings. With this article, we want to create awareness of the work in this special area of language studies and of the inherent cross-disciplinarity that makes LSP special compared to common-core language. An acknowledgement of the importance of this field both in terms...... of more empirical studies and in terms of a greater application of the results would give language specialists in trade and industry a solid and updated basis for communication and language use....

Automobile dependence in cities: An international comparison of urban transport and land use patterns with implications for sustainability

International Nuclear Information System (INIS)

Kenworthy, J.R.; Laube, F.B.

1996-01-01

Cities around the world are subject to increasing levels of environmental impact from dependence on the automobile. In the highly auto-dependent cities of the US and Australia, this is manifested in problems such as urban sprawl and its destruction of prime farming land and natural landscapes, photochemical smog that can be primarily attributed to auto emissions. On top of the more local impacts of the automobile, the global dimension should not be forgotten. Perhaps the two most pressing issues in this regard are the oil problem and the greenhouse problem. A comparison of global cities over the period 1980 to 1990 reveals large differences in automobile dependence with implications for the future sustainability of cities in different countries. This study explores some of the underlying land use, transport, and economic reasons for these different transport patterns. It briefly reviews what the sustainability agenda means for transport and land use patterns in cities and suggests a suite of targets or goals for sustainability by which cities might measure their current directions and plans

Talking about the Automobile Braking System

Science.gov (United States)

Xu, Zhiqiang

2017-12-01

With the continuous progress of society, the continuous development of the times, people’s living standards continue to improve, people continue to improve the pursuit. With the rapid development of automobile manufacturing, the car will be all over the tens of thousands of households, the increase in car traffic, a direct result of the incidence of traffic accidents. Brake system is the guarantee of the safety of the car, its technical condition is good or bad, directly affect the operational safety and transportation efficiency, so the brake system is absolutely reliable. The requirements of the car on the braking system is to have a certain braking force to ensure reliable work in all cases, light and flexible operation. Normal braking should be good performance, in addition to a foot sensitive, the emergency brake four rounds can not be too long, not partial, not ring.

Drivers of Finished-Goods Inventory in the U.S. Automobile Industry

OpenAIRE

Gérard P. Cachon; Marcelo Olivares

2010-01-01

Automobile manufacturers in the U.S. supply chain exhibit significant differences in their days of supply of finished vehicles (average inventory divided by average daily sales rate). For example, from 1995 to 2004, Toyota consistently carried approximately 30 fewer days of supply than General Motors. This suggests that Toyota's well-documented advantage in manufacturing efficiency, product design, and upstream supply chain management extends to their finished-goods inventory in their downstr...

Comparison study of multistep forging and injection forging of automobile fasteners

OpenAIRE

Chen Senyong; Qin Yi

2015-01-01

In order to improve production efficiency, injection forging as a feasible approach was introduced to automobile fasteners production. In the study reported in this paper, two forging approaches, traditional multistep forging and injection forging, were analysed by using a finite element method. Using ABAQUS and DEFORM, some significant factors, namely, forging force, energy consumption, component accuracy and stress distribution in the die, were compared to explore the potential and challeng...

Environmental strategies in the automobile industry; Umweltstrategien in der Automobilbranche

Energy Technology Data Exchange (ETDEWEB)

Bratzel, S.; Tellermann, R. [Center of Automotive, FHDW, Bergisch Gladbach (Germany)

2007-12-15

An actual market analysis on the environment strategies of the automobile industry concludes that the large companies react preferential with marketing measures to the climatic change debate and do not consequently support innovative environmental technology developments. The study show that the companies BMW, Toyota, and Volkswagen have the best environmental stategies, Daimler, Ford, Honda Porsche, Peugeot, Citroen show fragments of an environmental strategey, Chrysler, General Motors, Fiat, Mitsubishi and Nissan/Renault invest in marketing strategies, but not in environmental strategies.

Amplitude-phase characteristics of regulators of high -speed automobile diesels

OpenAIRE

Тырловой, С. И.

2009-01-01

The regulator frequency response has been analyzed to work out a strategy for repairing and renewal of fuel equipment used by foreign high-speed automobile diesels. For taking into consideration the heavy gradients of kinetic energy of the regulator elements the Lagrange equation of the second kind that includes the partial derivative of kinetic energy along the axis of motion of a gauge clutch was used.  Such a record, which was not kept for the known models, allowed for considerable clarifi...

38 CFR 61.0 - Purpose.

Science.gov (United States)

2010-07-01

... PROVIDERS GRANT AND PER DIEM PROGRAM § 61.0 Purpose. This part implements the VA Homeless Providers Grant and Per Diem Program which consists of the following components: capital grants, per diem, special...

Research on embedded automobile collision avoidance system

Directory of Open Access Journals (Sweden)

TAO Feng

2016-08-01

Full Text Available Taking ARM embedded Linux operating system as the development platform,combined with AVR microcontroller,while optimizing the ranging algorithm and using air ultrasonic transducer,the measurement range of which can be up to 50 meter,this paper designs a high-precision,range far,low price,various models suitable automobile collision avoidance warning system.The system adopts Forlinx OK6410 development board for the master.AVR microcontroller is responsible for taking the data of traveling distance between vehicles,and with the ARM development board via RS232 communication transfers vehicle′s distance and speed information to the ARM development boards.The system uses the established collision avoidance model to get alarm information.Experiments show that the system can accurately send out alarm information within a certain range.It is innovative and practical.

Head-up and head-down displays integration in automobiles

Science.gov (United States)

Betancur, J. Alejandro; Osorio-Gómez, Gilberto; Agudelo, J. David

2014-06-01

In automotive industry, the dashboard has been ergonomically developed in order to keep the driver focused on the horizon while driving, but the possibility to access external electronic devices constraints the driver to turn away his face, generating dangerous situations in spite of the short periods of time. Therefore, this work explores the integration of Head-Up Displays and Head-Down Displays in automobiles, proposing configurations that give to drivers the facility to driving focused. In this way, some of the main ergonomic comments about those configurations are proposed; and also, some technical comments regarding the implemented arrangements are given.

Prevalence and predictors of home and automobile smoking bans and child environmental tobacco smoke exposure: a cross-sectional study of U.S.- and Mexico-born Hispanic women with young children

Directory of Open Access Journals (Sweden)

Kegler Michelle C

2006-10-01

Full Text Available Abstract Background Detrimental effects of environmental tobacco smoke (ETS exposure on child health are well documented. Because young children's primary exposure to ETS occurs in homes and automobiles, voluntary smoking restrictions can substantially reduce exposure. We assessed the prevalence of home and automobile smoking bans among U.S.- and Mexico-born Hispanics in the southwestern United States, and examined the influence of mother's country of birth and smoking practices on voluntary smoking bans and on child ETS exposure. Methods U.S.- and Mexico-born Hispanic mothers of children aged 2 through 12 years were systematically sampled from health clinics in Albuquerque, New Mexico. In-person interviews were conducted with 269 mothers (75.4% response rate to obtain information on main study outcomes (complete versus no/partial home and automobile smoking bans; child room and automobile ETS exposure and risk factors (mother's country of birth, maternal and household smoking behaviors. Data were analyzed with chi square tests and logistic regression models. Results Three-fourths (74–77% of U.S.-born and 90–95% of Mexico-born mothers reported complete automobile and home smoking bans. In multivariate analyses, mother's U.S nativity, mother's current smoking, and presence of other adult smokers in the home were associated with significantly increased odds of not having a complete home or automobile smoking ban. Mother's smoking was associated with child ETS exposure both indoors (odds ratio [OR] = 3.31 and in automobiles (OR = 2.97. Children of U.S.-born mothers had increased odds of exposure to ETS indoors (OR = 3.24; 95% confidence interval [CI]: 1.37–7.69, but not in automobiles. Having complete smoking bans was associated with substantially reduced odds of child ETS exposure both indoors (OR = 0.10; 95% CI: 0.04–0.27 and in automobiles (OR = 0.14; 95% CI: 0.05–0.36. Conclusion This study of Hispanic mothers in the southwestern U

[Environmental pollution by products of wear and tear automobile-road complex].

Science.gov (United States)

Levanchuk, A V

2014-01-01

North-West State Medical University named after I.I. Mechnikov, Saint Petersburg, Russian Federation, 191015. There is supposed the method for the assessment of amounts of pollutants released into the environment during the operational wear of tyre treads, brake system of cars and the road pavement. There are presented results of chemical analysis of residues of combustion. The necessity of control of products of work wear of automobile-road complex has been substantiated.

Environmental and biological monitoring of benzene during self-service automobile refueling.

OpenAIRE

Egeghy, P P; Tornero-Velez, R; Rappaport, S M

2000-01-01

Although automobile refueling represents the major source of benzene exposure among the nonsmoking public, few data are available regarding such exposures and the associated uptake of benzene. We repeatedly measured benzene exposure and uptake (via benzene in exhaled breath) among 39 self-service customers using self-administered monitoring, a technique rarely used to obtain measurements from the general public (130 sets of measurements were obtained). Benzene exposures averaged 2.9 mg/m(3) (...

ESTIMATED RATE OF FATAL AUTOMOBILE ACCIDENTS ATTRIBUTABLE TO ACUTE SOLVENT EXPOSURE AT LOW INHALED CONCENTRATIONS

Science.gov (United States)

Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mecha...

7 CFR 771.5 - Loan purposes.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Loan purposes. 771.5 Section 771.5 Agriculture... SPECIAL PROGRAMS BOLL WEEVIL ERADICATION LOAN PROGRAM § 771.5 Loan purposes. (a) Loan funds may be used..., travel and office operations; (3) Salaries and benefits. (b) Loan funds may not be used to pay expenses...

A special purpose vehicle for radiological emergency response

International Nuclear Information System (INIS)

Braeck, K.

1995-01-01

The scope of this paper encompasses the design and application of a Contamination Control Station (CCS) Response Vehicle. The vehicle is part of emergency response assets at the Department of Energy Pantex Plant, the nation's final assembly and disassembly point for nuclear weapons. The CCS Response Vehicle was designed to satisfy the need for a rapid deployment of equipment for the setup of a Contamination Control Station. This deployment may be either on the Pantex Plant site, or, if directed by the DOE Albuquerque Operations Office, to any location in the US or worldwide to a site having radioactive contamination and needing response assets of this type. Based on the specialized nature of the vehicle and its mission, certain design criteria must be considered. The vehicle must be air transportable. This criteria alone poses size, weight, and material restrictions due to the transporting aircraft and temperature/pressure variations. This paper first focuses on the overall mission of the vehicle, then highlights some of the design considerations

An Innovative Approach to Enhancing the Sustainable Development of Japanese Automobile Suppliers

Directory of Open Access Journals (Sweden)

Chia-Nan Wang

2016-04-01

Full Text Available The Japanese automobile industry has been hit sharply by the economic downturn of recent decades. The rise in costs and decline in sales have led to serious problems in the auto industry. In order to address these issues, most companies engage in downsizing and redesigning production operations. It is crucial to investigate the time wasted by replacing assembly boards occurring in manufacturing lines. Therefore, the aim of this study was to provide an integrated approach, Teoriya Resheniya Izobreatatelskih Zadatch (TRIZ, to providing efficient solutions for the automobile industry. The first step of this methodology is to detail the technical problems using the Function and Attribute Analysis (FAA model. Secondly, a contradiction matrix and the inventive principle were applied to find the solutions. In this study, an auto part supplier named Sumi-Hanel located in Hanoi, Vietnam, was taken as a case study; the empirical results showed that waste time had been reduced to 67%, nearly 8400 square meters was saved, and a 20% cost reduction was achieved by reusing old frames. The research proves that the combination of TRIZ and lean manufacturing successfully increases production performance and reduces waste due to technological advancements.

Research on simulation based material delivery system for an automobile company with multi logistics center

Science.gov (United States)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

Special Education in Jordan

Science.gov (United States)

Abu-Hamour, Bashir; Al-Hmouz, Hanan

2014-01-01

The purpose of this article is to provide a brief background about special education system in Jordan and particularly describes the present types of programmes and legislation provided within the country to students with special needs, as well as integration movement. Jordan has historically provided a limited number of educational opportunities…

Female identity discourse in automobile advertisements

Directory of Open Access Journals (Sweden)

Montserrat López Díaz

2012-01-01

Full Text Available The article analyzes the way in which the modern car-advertisement defines the identity of women as potential purchasers – to whom it is designed to get through. The research includes language and iconic instruments by which this type of advertisement aims to create a feminized market of products formerly recognized as traditionally masculine. The identification of the addressee of each publicity material might be subsumed under a set of stereotypes, thus enabling advertisers to get across their message using the code of addressee’s own values. The present paper concentrates on the linguistic specifity of the ads for high-tech goods (automobiles targeting the feminine public and eventually points out their high degree of markedness according to the sex of addressees. Discourse analysis and a closer look at linguistic means appearing in French, Spanish and Polish automotive commercials both reveals a stereotyped woman’s image and shows how they happen to perpetutate it.

Effect of Automobile Travel Time Between Patients' Homes and Ophthalmologists' Offices on Screening for Diabetic Retinopathy.

Science.gov (United States)

Macon, Céline; Carrier, Hélène; Janczewski, Aurélie; Verger, Pierre; Casanova, Ludovic

2018-01-01

The accessibility of ophthalmologists appears to influence the quality of screening for diabetic retinopathy (DR). The principal objective of this study was to analyze the effect of automobile travel time to the closest ophthalmologist on the time to DR screening. This historical cohort study used reimbursement databases from the principal national health insurance fund. Patients were included if they had been reimbursed at least thrice for oral antidiabetic medications in the 12 months before the study start date. Patients were followed up from January 1, 2008, for 4 years. The expected event was a DR screening by an ocular fundus examination. The automobile travel time to the nearest ophthalmologist was calculated by the distance between communes, estimated by appropriate software. A Kaplan-Meier curve and a multivariate Cox model were used to model the effect of travel time on the time until DR screening. A sensitivity analysis of travel time described the results of the Cox model. At the start of 2008, 6,573 patients living in 328 different municipalities were included. The multivariate model found that patients living 60 min or more away from an ophthalmologist had a lower instantaneous probability of DR screening than those living travel time. Increased automobile travel time for patients with diabetes to the nearest ophthalmologist was associated with a longer time to DR screening.

24 CFR 888.301 - Purpose and scope.

Science.gov (United States)

2010-04-01

..., State Finance Agencies, Section 515 Farmers Home Administration, Section 202 Elderly or Handicapped, and Special Allocations Projects § 888.301 Purpose and scope. (a) Purpose. This subpart describes the basic... Rehabilitation (Part 881); State Finance Agencies (Part 883); and Section 515 Farmers Home Administration (Part...

Optimization of eyesafe avalanche photodiode lidar for automobile safety and autonomous navigation systems

Science.gov (United States)

Williams, George M.

2017-03-01

Newly emerging accident-reducing, driver-assistance, and autonomous-navigation technology for automobiles is based on real-time three-dimensional mapping and object detection, tracking, and classification using lidar sensors. Yet, the lack of lidar sensors suitable for meeting application requirements appreciably limits practical widespread use of lidar in trucking, public livery, consumer cars, and fleet automobiles. To address this need, a system-engineering perspective to eyesafe lidar-system design for high-level advanced driver-assistance sensor systems and a design trade study including 1.5-μm spot-scanned, line-scanned, and flash-lidar systems are presented. A cost-effective lidar instrument design is then proposed based on high-repetition-rate diode-pumped solid-state lasers and high-gain, low-excess-noise InGaAs avalanche photodiode receivers and focal plane arrays. Using probabilistic receiver-operating-characteristic analysis, derived from measured component performance, a compact lidar system is proposed that is capable of 220 m ranging with 5-cm accuracy, which can be readily scaled to a 360-deg field of regard.

Social Sustainability Issues and Older Adults’ Dependence on Automobiles in Low-Density Environments

Directory of Open Access Journals (Sweden)

Hitomi Nakanishi

2015-06-01

Full Text Available An implicit assumption underlying government strategies to achieve a more sustainable urban transportation system is that all automobile users will be encouraged or persuaded to use more “green” transportation: public transportation, walking and cycling. Little consideration has been given as to how sustainable transportation policies and programmess might impact on different age groups in society, including those retired or semi-retired, despite the fact that an unprecedented number of older drivers will be on the highways in the next few decades. There is limited literature on the contextual factors behind their continued reliance on automobiles, their actual driving behavior (e.g., route choice and time of day to drive framed within the context of social sustainability. This paper introduces the elements of transportation and social sustainability then conducts a comprehensive international literature review focusing on older drivers, their travel choices and associated social sustainability issues. It describes a case study, low-density city and presents empirical evidence, from two surveys conducted in Canberra, Australia. The paper concludes with future research directions that address these issues associated with sustainable transportation.

Automobiles and environment - also an economic problem. Kraftfahrzeug und Umwelt - auch ein oekonomisches Problem

Energy Technology Data Exchange (ETDEWEB)

Mager, N

1981-01-01

The proliferation of cars since the early 60's and the resulting increasing spatial mobility have contributed to a considerable rise of wealth in economies based on the division of labour, it also had an influence on the creation of new or extension of existing areas of liberty. These undisputably positive effects are of the widerspread private use of cars are correlated with harmful effects on our environment. In some areas they have increased so much as to necessitate when more intensive efforts are in order to reduce pollution. The present thesis aims at describing and discussing the economic problems connected with exhaust gas control. A comprehensive economic analysis of the enviromental damages caused by automobiles and of the corresponding counterstrategies of ecologic policy must by based on the state of pollution existing in reality. The thesis therefore starts with a brief survey on the effective pollution caused by road traffic and automobiles in the Federal Republic of Germany.

Prueba de Aptitud para el Aprendizaje de Lenguas Extranjeras (PAPALE) Language Aptitude Test (LAT) (First and Second Versions). English for Special Purposes. Emergency Care Attendant.

Science.gov (United States)

Muro, Gertrude

This book contains two versions of the Language Aptitude Test. It is part of a package of materials developed for use in an English for Special Purposes project, which offers classes in reading, grammar, and emergency care attendant training for limited English proficient students. Introductory material describes the parts of two versions and…

The Development of Strategies for the Assignment of Semantic Information to Unknown Lexemes in Text. Lenguas para Objetivos Especificas (Languages for Special Purposes), No. 5.

Science.gov (United States)

Alderson, Charles; Alvarez, Guadalupe

An English for Special Purposes (ESP) course being developed aims to give the students a series of techniques to help them handle vocabulary in a text, and teach them strategies for identifying meaning in context. Traditional strategies, such as the study of morphology, use of grammatical information, and exercises in dictionary usage, are…

Features of applying systems approach for evaluating the reliability of cryogenic systems for special purposes

Directory of Open Access Journals (Sweden)

E. D. Chertov

2016-01-01

Full Text Available Summary. The analysis of cryogenic installations confirms objective regularity of increase in amount of the tasks solved by systems of a special purpose. One of the most important directions of development of a cryogenics is creation of installations for air separation product receipt, namely oxygen and nitrogen. Modern aviation complexes require use of these gases in large numbers as in gaseous, and in the liquid state. The onboard gas systems applied in aircraft of the Russian Federation are subdivided on: oxygen system; air (nitric system; system of neutral gas; fire-proof system. Technological schemes ADI are in many respects determined by pressure of compressed air or, in a general sense, a refrigerating cycle. For the majority ADI a working body of a refrigerating cycle the divided air is, that is technological and refrigerating cycles in installation are integrated. By this principle differentiate installations: low pressure; average and high pressure; with detander; with preliminary chilling. There is also insignificant number of the ADI types in which refrigerating and technological cycles are separated. These are installations with external chilling. For the solution of tasks of control of technical condition of the BRV hardware in real time and estimates of indicators of reliability it is offered to use multi-agent technologies. Multi-agent approach is the most acceptable for creation of SPPR for reliability assessment as allows: to redistribute processing of information on elements of system that leads to increase in overall performance; to solve a problem of accumulating, storage and recycling of knowledge that will allow to increase significantly efficiency of the solution of tasks of an assessment of reliability; to considerably reduce intervention of the person in process of functioning of system that will save time of the person of the making decision (PMD and will not demand from it special skills of work with it.

Design of Nonwoven Carpets to Upgrade Sound Isolation Features in Automobiles

Directory of Open Access Journals (Sweden)

Atakan Raziye

2014-12-01

Full Text Available With the increases of the expected properties of textile products, better and advanced new designs are being created. Textiles used in vehicles are increasing, and the current performance of the expectations bar is determined by automobile manufacturers. While meeting the expectations of users in the vehicle mechanically, but also disturbing the user during operation of the mechanical properties of this ratio should be minimized. This study was intended to minimize sound transmission of nonwoven textile components, which are used in cars as silencer parts. For that purpose, four different models were developed in this study. First model consists of three designs for baggage carpets. Second model has six designs for floor coverings. Third model comprises two designs inner dash felt and finally fourth model includes two designs of hood liners. The acoustical absorption coefficients and transmission loss of these carpets were tested and evaluated in the frequency range of 16-6300 Hz. The measurements demonstrated that nonwoven layer is a very significant and effective part of a carpet due to its contribution in the sound isolation. With this study, it has been determined which layer has better performance on sound absorption and transmission loss among different carpet types. A combination of heavy layer and nonwoven layer carpets is found to be benefit for noise and sound insulation.

基于微博的汽车品牌传播策略研究%Strategy Researchon Automobile Brand Advertising Based on Weibo

Institute of Scientific and Technical Information of China (English)

辛晖

2015-01-01

It has been notice by automobile enterprises gradually that traditional sales mode can no longer adapt to the com-petition in the automobile market,car market has transformed from seller's market to buyer's market.With the advent of the era of network, the competition of automobile market,to a great extent,is the competition of network marketing.UsingWeibo as a new channel for automobile brand advertising is aneffective brand communication strategy.%汽车企业逐渐认识到传统的销售模式已经不再适应激烈的汽车市场竞争，汽车市场由卖方市场向买方市场转化。随着网络时代的到来，汽车市场的竞争在很大程度上体现为网络营销的竞争，以品牌为核心的营销时代。以微博作为汽车品牌传播新渠道，是汽车品牌有效传播的营销策略。

International Trade in Intermediate Inputs: The Case of the Automobile Industry

OpenAIRE

Markus Diehl

2001-01-01

International trade statistics and input-output tables are analyzed in order to test the hypothesis that international production networks have become more relevant. The share of imported inputs in the gross output value of the motor vehicle industry has grown significantly during the last two decades. Moreover, some low-income countries have become strong exporters of automobile parts, but this trade is mainly regional rather than global. Detailed results are presented in case studies on fou...

Environmental Effects of Driving Automobiles in the University of Malaya Campus: A Pilot Study

Directory of Open Access Journals (Sweden)

S.Y. Kong

2009-12-01

Full Text Available With the increase of human population there has been an evident increase in per capita automobile use and ownership, significantly to a point that almost every urban university campus faces serious challenges from the heavy traffic movement as well as the associated parking shortages. Multiple factors, including lack of land for new parking lots, high cost of building parking structures and the desire to preserve the air quality and campus green spaces are leading many educational institutions towards a new vision based upon expanded transit access, better bicycle and pedestrian facilities and financial incentives for students and staff to drive less. (Toor and Havlick, 2004 This is in stark contrast to the traditional approach to campus transportation planning of the University of Malaya (UM, Kuala Lumpur, Malaysia that allows students, staff and visitors to drive in the campus. The objective of this study is to investigate the related issues and environmental impact of allowing automobile driving in the campus. Studies will also be done to analyse the relationship between university campus planning and traffic condition. Air quality and noise pollution data of 3 selected sites in the campus will be recorded. Subsequently, the air pollutant index and noise pollution level will be identified and data analyses will be done on the data samples. Simultaneously, a survey questionnaire will be conducted to gauge the student’s attitude and degree of awareness with air and noise pollution in the campus. This pilot study reveals that the increasing use of automobiles within the campus has a negative impact on local environment and the quality of life in campus

The Effects of Automobile Recalls on the Severity of Accidents

OpenAIRE

Hugo Benitez-Silva; Yong-Kyun Bae

2010-01-01

The number of automobile recalls in the U.S. has substantially increased over the last two decades, and after a record of over 30 million cars recalled in 2004, in the last few years it has consistently reached between 15 and 17 million, and in 2009 alone 16.4 million cars were recalled. Toyota's recall crisis in 2010 illustrates how recalls can affect a large number of American drivers and the defects connected to them can result in loss of life and serious accidents. However, in spite of th...

A Review of Voiture Minimum. Le Corbusier and the Automobile

Directory of Open Access Journals (Sweden)

Christoph Schnoor

2013-03-01

Full Text Available Here is a full-on celebration of cars and someone’s addiction to cars. In its midst drives Le Corbusier. The book, Voiture Minimum. Le Corbusier and the Automobile (Cambridge, Mass. and London: MIT Press, 2011, has recently been published by Spanish architect and academic Antonio Amado. What a curious book. It is something between a detective story circling around determining the date of a single drawing (1928 or 1936 and, simultaneously, it is “Everything you always wanted to know about Le Corbusier and cars but were afraid to ask”.

PRODUCT EFFICIENCY IN THE SPANISH AUTOMOBILE MARKET

Directory of Open Access Journals (Sweden)

González, Eduardo

2013-01-01

Full Text Available This paper evaluates product efficiency in the Spanish automobile market. We use non parametric frontier techniques in order to estimate product efficiency scores for each model. These scores reflect the minimum price for which each car could be sold, given the bundle of tangible features it offers in comparison to the best-buy models. Unlike previous research, we use discounted prices which have been adjusted by car dealerships to meet sale targets. Therefore, we interpret the efficiency scores as indicators of the value of the intangible features of the brand. The results show that Audi, Volvo, Volkswagen and Mercedes offer the greatest intangible value, since they are heavily overpriced in terms of price/product ratios. Conversely, Seat, Kia, Renault and Dacia are the brands that can be taken as referent in terms of price/product ratios.

Single-purpose nuclear medicine instruments

International Nuclear Information System (INIS)

Boucek, J.

Nuclear medicine requires the most up-to-date specialized technical facilities. The paper underlines the factor of reliability in purpose-designed equipment used for basic examinations. The possibility is also discussed of the automation of standard nuclear medicine instruments

28 CFR 541.40 - Purpose and scope.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Purpose and scope. 541.40 Section 541.40 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.40 Purpose and scope. (a) In an effort to...

Youth Purpose Worldwide: A Tapestry of Possibilities

Science.gov (United States)

Moran, Seana

2017-01-01

Interest in youth purpose is growing among scholars around the world. With globalization, better understanding of life purposes in different countries becomes more important as this generation's youth are influenced by ideas and events anywhere. This special issue contributes to this inclusive, worldwide frame of mind by showcasing work done…

The Effect of the Arab Boycott on Israel: The Automobile Market

OpenAIRE

Chaim Fershtman; Neil Gandal

1996-01-01

Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel. This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market. In this paper, we examine the effect of the Arab economic boycott on this market. Using recent advances in estimating discrete-choice models of product differentiation, we estimate that had the boycott continued, the welfare los...

Design of an Automatic Forward and Back Collision Avoidance System for Automobiles

Directory of Open Access Journals (Sweden)

Tasneem Sanjana

2018-01-01

Full Text Available This paper is the extended reflection of work originally presented in conference of Electrical, Computer and Communication Engineering (ECCE-CUET 2017, entitled “Automated Anti Collision System for Automobiles”. Automated collision avoidance system is a trending technology of science in automobile engineering. The aim of this paper is to design a system which will prevent collision from the front as well as the back for automobiles. This paper gives an overview of secure and smooth journey of car (vehicles as well as the certainty of human life. This system is controlled by microcontroller ATMEGA32. Two Sharp distance sensors are used to detect object within the danger range where one is for front detection and other is for back detection. A crystal oscillator is used to produce the oscillation and generates the clock pulse of the microcontroller. An LCD and a GLCD are used to give information about the safe distance for front and rear respectively, and a buzzer is used as alarm. An actuator is used as automatic brake and inside the actuator there is a motor driver that runs the actuator. For coding “microC PRO for PIC” is used and “Proteus Design Suite Version 8 Software” is used for simulation.

Limits to leapfrogging in energy technologies? Evidence from the Chinese automobile industry

International Nuclear Information System (INIS)

Gallagher, Kelly Sims

2006-01-01

Limits to leapfrogging in energy technologies? One of the most attractive notions in the field of sustainable energy development is the concept of energy-technology 'leapfrogging'. Leapfrogging through international technology transfer can be especially problematic because often developing countries do not have the technological capabilities to produce or integrate the advanced energy technologies themselves. Until they have acquired the capabilities to produce the advanced technologies themselves, most late-industrializing countries buy their new technologies from industrialized countries, usually through licensing or joint-venture arrangements. Empirical case studies of the three main Sino-US passenger-car joint ventures reveal that until the late 1990s, little energy or environmental leapfrogging occurred in the Chinese automobile industry as the result of the introduction of US automotive technology. An improvement in Chinese capabilities and more stringent Chinese energy and environmental policies are needed to induce energy leapfrogging in the Chinese automobile industry. Foreign firms also have a social responsibility to contribute to China's sustainable industrial development. In order to realize the promise of the leapfrogging, the limits to leapfrogging must be identified and acknowledged so that strategies can be devised to surmount the barriers to the introduction of advanced energy technologies in developing countries

Perception of risk from automobile safety defects.

Science.gov (United States)

Slovic, P; MacGregor, D; Kraus, N N

1987-10-01

Descriptions of safety engineering defects of the kind that compel automobile manufacturers to initiate a recall campaign were evaluated by individuals on a set of risk characteristic scales that included overall vehicle riskiness, manufacturer's ability to anticipate the defect, importance for vehicle operation, severity of consequences and likelihood of compliance with a recall notice. A factor analysis of the risk characteristics indicated that judgments could be summarized in terms of two composite scales, one representing the uncontrollability of the damage the safety defect might cause and the other representing the foreseeability of the defect by the manufacturer. Motor vehicle defects were found to be highly diverse in terms of the perceived qualities of their risks. Location of individual defects within the factor space was closely associated with perceived riskiness, perceived likelihood of purchasing another car from the same manufacturer, perceived likelihood of compliance with a recall notice, and actual compliance rates.

Optimizing Diamond Structured Automobile Supply Chain Network Towards a Robust Business Continuity Management

Directory of Open Access Journals (Sweden)

Abednico Montshiwa

2016-02-01

Full Text Available This paper presents an optimized diamond structured automobile supply chain network towards a robust Business Continuity Management model. The model is necessitated by the nature of the automobile supply chain. Companies in tier two are centralized and numerically limited and have to supply multiple tier one companies with goods and services. The challenge with this supply chain structure is the inherent risks in the supply chain. Once supply chain disruption takes place at tier 2 level, the whole supply chain network suffers huge loses. To address this challenge, the paper replaces Risk Analysis with Risk Ranking and it introduces Supply Chain Cooperation (SCC to the traditional Business Continuity Plan (BCP concept. The paper employed three statistical analysis techniques (correlation analysis, regression analysis and Smart PLS 3.0 calculations. In this study, correlation and regression analysis results on risk rankings, SCC and Business Impact Analysis were significant, ascertaining the value of the model. The multivariate data analysis calculations demonstrated that SCC has a positive total significant effect on risk rankings and BCM while BIA has strongest positive effects on all BCP factors. Finally, sensitivity analysis demonstrated that company size plays a role in BCM.

46 CFR 169.101 - Purpose.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS General Provisions § 169.101 Purpose. The regulations in this part set forth uniform requirements which are suited to the particular characteristics and specialized operations of sailing school vessels as defined in Title 46...

Energy-harvesting potential of automobile suspension

Science.gov (United States)

Múčka, Peter

2016-12-01

This study is aimed quantify dissipated power in a damper of automobile suspension to predict energy harvesting potential of a passenger car more accurately. Field measurements of power dissipation in a regenerative damper are still rare. The novelty is in using the broad database of real road profiles, a 9 degrees-of-freedom full-car model with real parameters, and a tyre-enveloping contact model. Results were presented as a function of road surface type, velocity and road roughness characterised by International Roughness Index. Results were calculated for 1600 test sections of a total length about 253.5 km. Root mean square of a dissipated power was calculated from 19 to 46 W for all four suspension dampers and velocity 60 km/h and from 24 to 58 W for velocity 90 km/h. Results were compared for a full-car model with a tyre-enveloping road contact, full-car and quarter-car models with a tyre-road point contact. Mean difference among three models in calculated power was a few per cent.

Thermal automobile interior model; Thermisches Pkw-Innenraum-Modell

Energy Technology Data Exchange (ETDEWEB)

Flieger, Bjoern; Streblow, Rita; Mueller, Dirk [RWTH Aachen (Germany). E.ON Energieforschungszentrum

2012-11-01

The energy demand of climate-control instruments is an increasingly important focus of study in the automobile industry. The ratio of the energy demand for the engine as opposed to that of other car components will greatly change in the future. Especially for electrical vehicles the auxiliary energy use is very critical because of the limited battery capacity. Thus, the aim of this research project is to investigate means of more efficiently using the available energy by maintaining comfort criteria for all passengers. To realize this, a simulation model of a car interior cabin is being developed with which conclusions can be drawn, under the given boundary conditions, about the air circulation and -states as well as about the resulting energy demand to evaluate the efficiency and the thermal comfort. (orig.)

Simulation of absorption refrigeration system for automobile application

Directory of Open Access Journals (Sweden)

Ramanathan Anand

2008-01-01

Full Text Available An automotive air-conditioning system based on absorption refrigeration cycle has been simulated. This waste heat driven vapor absorption refrigeration system is one alternate to the currently used vapour compression refrigeration system for automotive air-conditioning. Performance analysis of vapor absorption refrigeration system has been done by developing a steady-state simulation model to find the limitation of the proposed system. The water-lithium bromide pair is used as a working mixture for its favorable thermodynamic and transport properties compared to the conventional refrigerants utilized in vapor compression refrigeration applications. The pump power required for the proposed vapor absorption refrigeration system was found lesser than the power required to operate the compressor used in the conventional vapor compression refrigeration system. A possible arrangement of the absorption system for automobile application is proposed.

Automobile Driver Fingerprinting

Directory of Open Access Journals (Sweden)

Enev Miro

2016-01-01

Full Text Available Today’s automobiles leverage powerful sensors and embedded computers to optimize efficiency, safety, and driver engagement. However the complexity of possible inferences using in-car sensor data is not well understood. While we do not know of attempts by automotive manufacturers or makers of after-market components (like insurance dongles to violate privacy, a key question we ask is: could they (or their collection and later accidental leaks of data violate a driver’s privacy? In the present study, we experimentally investigate the potential to identify individuals using sensor data snippets of their natural driving behavior. More specifically we record the in-vehicle sensor data on the controllerarea- network (CAN of a typical modern vehicle (popular 2009 sedan as each of 15 participants (a performed a series of maneuvers in an isolated parking lot, and (b drove the vehicle in traffic along a defined ~ 50 mile loop through the Seattle metropolitan area. We then split the data into training and testing sets, train an ensemble of classifiers, and evaluate identification accuracy of test data queries by looking at the highest voted candidate when considering all possible one-vs-one comparisons. Our results indicate that, at least among small sets, drivers are indeed distinguishable using only incar sensors. In particular, we find that it is possible to differentiate our 15 drivers with 100% accuracy when training with all of the available sensors using 90% of driving data from each person. Furthermore, it is possible to reach high identification rates using less than 8 minutes of training data. When more training data is available it is possible to reach very high identification using only a single sensor (e.g., the brake pedal. As an extension, we also demonstrate the feasibility of performing driver identification across multiple days of data collection

Test results of NREL 10M, special-purpose family of thin airfoils

Energy Technology Data Exchange (ETDEWEB)

Starcher, K.L.; Nelson, V.C.; Wei, Jun [West Texas A& M Univ., Canyon, TX (United States)

1996-12-31

Two 25 kW Carter Wind Systems were tested to determine performance differences between production blades and rotors with NREL Special Purpose Thin Airfoils. Blade design, mold preparation, blade production, and testing were conducted. Design tools were created for computer modeling of the blade. The blades had the same twist, taper, and length as production blades. Flap natural frequency was adjusted to be as similar as possible between rotors, as was blade mass, blade center of gravity and rotor moment of inertia. Data collected were; wind speed at hub height, blade root flap & edgewise loads, main shaft torque, azimuth position, teeter angle, yaw angle and electrical power. These data were collected at 128 Hertz for data sets of eight seconds. This data set was then written to hard disk and the cycle repeated resulting in a file containing five and one half minutes of data. A data run consisted of; preflight checkout/warm-up of equipment, preflight calibration/verification of all sensors on both turbines, collection of five files of data (about thirty minutes of data), post flight calibration/verification of sensors. During this high speed data collection period there were a total of twenty-four data runs collected. Data were collected for wind speeds in the range about 7, 10 and 13 m/s. A data matrix was filled for clean, medium and heavy surface roughness. Baseline power curves, parametric pitch variation runs to establish testing pitch settings, high speed data collection runs with and without applied surface roughness were completed and analyzed. Data were compared using simple arithmetic mean, Fast Fourier Transform (FFT) analysis, rainflow counting algorithms and wavelet analysis. The NREL airfoils showed much less sensitivity to surface roughness. There were minimal root bending load differences. Annual energy production during long term operation is being determined. 9 refs., 7 figs.

The Text of Tile Master Agreement between the Agency and the United States of America Governing Sales of Source, By- Product and Special Nuclear Materials for research Purposes

International Nuclear Information System (INIS)

1974-01-01

The text of the Master Agreement Governing Sales of Source, Bye Product and Special Nuclear Materials for Research Purposes, which has been concluded between the Agency and the Government of the United States of America, is reproduced herein for the information of all Members,

Risk factors for automobile accidents caused by falling asleep while driving in obstructive sleep apnea syndrome.

Science.gov (United States)

Arita, Aki; Sasanabe, Ryujiro; Hasegawa, Rika; Nomura, Atsuhiko; Hori, Reiko; Mano, Mamiko; Konishi, Noriyuki; Shiomi, Toshiaki

2015-12-01

We examined the risk factors for automobile accidents caused by falling asleep while driving in subjects with obstructive sleep apnea syndrome (OSAS). We asked licensed drivers with history of snoring and excessive daytime sleepiness who had undergone polysomnography (PSG) at the Department of Sleep Medicine/Sleep Disorders Center at Aichi Medical University Hospital to complete the questionnaires on accidents caused by falling asleep while driving. As a subjective measure of sleepiness, we used the Epworth sleepiness scale (ESS). Based on PSG results, 2387 subjects diagnosed with OSAS were divided into three groups according to apnea-hypopnea index (AHI): mild-to-moderate (5 ≤ AHI accidents in the past 5 years due to falling asleep. Our multivariate analysis suggests that scores on the ESS and patient-reported frequency of feeling drowsy while regular driving and working are related to automobile accidents caused by falling asleep while driving.

Assessment of trace metals using lichen transplant from automobile mechanic workshop in Ile-Ife metropolis, Nigeria.

Science.gov (United States)

Odiwe, Anthony I; Adesanwo, Adeyemi T J; Olowoyo, Joshua O; Raimi, Idris O

2014-04-01

The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.

Advice of the Italian CCTN on the health risk assessment relative to exposure to automobile emissions

Energy Technology Data Exchange (ETDEWEB)

Camoni, I [ed.; Istituto Superiore di Sanita` , Rome (Italy). Lab. di Tossicologia Applicata; Mucci, N [ed.; ISPESL, Monteporzio Catone, Roma (Italy). Dip. di Medicina del Lavoro; Foa` , V [ed.; Milan Univ. (Italy). Clinica del lavoro Luigi Devoto

1998-06-01

The period 1990-1995 are reported, they concern the health impact of exposure to benzene and polycyclic aromatic hydrocarbons (PAHs), resulting from automobile exhaust products, for Italian general and occupationally exposed populations. The first recommendation takes into consideration the possible long-term effects of the unleaded gasoline, recently introduced in Italy. The latter two recommendations concern the quantitative evaluation of the risk of leukaemia and of the risk of lung cancer from exposure to benzene and PAHs, resulting from automobile exhaust. [Italiano] Sono riportati i pareri espressi dalla Commissione Consultiva Tossicologica Nazionale (CCTN) nel periodo 1990-1995 riguardanti la valutazione del rischio cancerogeno per esposizione a sostanze contenute nelle emissioni autoveicolari. In particolare, viene stimato il rischio aggiuntivo di leucemia per esposizione a benzene e di cancro polmonare per esposizione a idrocarburi policiclici aromatici (IPA), sia per la popolazione generale che per quella professionalmente esposta.

Research Article Special Issue

African Journals Online (AJOL)

pc

2017-08-08

Aug 8, 2017 ... systems of vehicle power units are the main source of both external and internal noise of ... Let's analyze the methods of automobile engine noise reduction. ..... Heckl M., Müller H.A. Reference book on technical acoustics.

Navigating Without Road Maps: The Early Business of Automobile Route Guide Publishing in the United States

Science.gov (United States)

Bauer, John T.

2018-05-01

In the United States, automobile route guides were important precursors to the road maps that Americans are familiar with today. Listing turn-by-turn directions between cities, they helped drivers navigate unmarked, local roads. This paper examines the early business of route guide publishing through the Official Automobile Blue Book series of guides. It focuses specifically on the expansion, contraction, and eventual decline of the Blue Book publishing empire and also the work of professional "pathfinders" that formed the company's data-gathering infrastructure. Be- ginning in 1901 with only one volume, the series steadily grew until 1920, when thirteen volumes were required to record thousands of routes throughout the country. Bankruptcy and corporate restructuring in 1921 forced the publishers to condense the guide into a four-volume set in 1922. Competition from emerging sheet maps, along with the nationwide standardization of highway numbers, pushed a switch to an atlas format in 1926. Blue Books, however, could not remain competitive and disappeared after 1937. "Pathfinders" were employed by the publishers and equipped with reliable automobiles. Soon they developed a shorthand notation system for recording field notes and efficiently incorporating them into the development workflow. Although pathfinders did not call themselves cartographers, they were geographical data field collectors and considered their work to be an "art and a science," much the same as modern-day cartographers. The paper concludes with some comments about the place of route guides in the history of American commercial cartography and draws some parallels between "pathfinders" and the digital road mappers of today.

Improving collaboration between large and small-medium enterprises in automobile production

Science.gov (United States)

Sung, Soyoung; Kim, Yanghoon; Chang, Hangbae

2018-01-01

Inter-organisational collaboration is important for achieving qualitative and quantitative performance improvement in the global competitive environment. In particular, the extent of collaboration between the mother company and its suppliers is important for the profitability and sustainability of a company in the automobile industry, which is carried out using a customisation and order production system. As a result of the empirical analysis in this study, the collaborative information sharing cycle is shortened and the collaborative information sharing scope is widened. Therefore, the level of collaboration is improved by constructing an IT collaboration system.

Comparative Assessment of Blood Lead Levels of Automobile Technicians in Organised and Roadside Garages in Lagos, Nigeria

Directory of Open Access Journals (Sweden)

Abdulsalam Saliu

2015-01-01

Full Text Available Occupational exposure to lead is common among automobile technicians and constitutes 0.9% of total global health burden with a majority of cases in developing countries. The aim of this study was to determine and compare the blood lead levels of automobile technicians in roadside and organised garages in Lagos State, Nigeria. This was a comparative cross-sectional study. Data were collected using interviewer-administered questionnaires. Physical examinations were conducted and blood was analysed for lead using atomic spectrophotometery. Statistical analyses were performed to compare the median blood lead levels of each group using the independent sample (Mann-Whitney U test. Seventy-three (40.3% of the organised compared to 59 (34.3% of the roadside groups had high blood lead levels. The organised group had statistically significant higher median blood lead levels of, 66.0 µg/dL than the roadside 43.5 µg/dL (P < 0.05. There was also statistically significant association between high blood lead levels and abnormal discolouration of the mucosa of the mouth in the organised group. Automobile technicians in organised garages in Lagos have higher prevalence of elevated blood lead levels and higher median levels than the roadside group. Preventive strategies against lead exposures should be instituted by the employers and further actions should be taken to minimize exposures, improve work practices, implement engineering controls (e.g., proper ventilation, and ensure the use of personal protective equipment.

12 CFR 220.1 - Authority, purpose, and scope.

Science.gov (United States)

2010-01-01

... principal purpose is to regulate extensions of credit by brokers and dealers; it also covers related... account and four special purpose accounts in which to record all financial relations between a customer... part does not apply to: (i) Financial relations between a customer and a creditor to the extent that...

Automotive Manufacturers' Cost/Revenue, Financial and Risk Analysis : Projected Impact of Automobile Manufacturing on the Plastics Industry

Science.gov (United States)

1979-08-01

The report is part of a study to update the historical and projected cost/revenue analysis of the U.S. domestic automobile manufacturers. It includes the evaluation of the historical and projected financial data to assess the corporate financial posi...

Active-flux based motion sensorless vector control of biaxial excitation generator/motor for automobiles (BEGA)

DEFF Research Database (Denmark)

Coroban-Schramel, Vasile; Boldea, Ion; Andreescu, Gheorghe-Daniel

2009-01-01

This paper proposes a novel, active-flux based, motion-sensorless vector control structure for biaxial excitation generator for automobiles (BEGA) for wide speed range operation. BEGA is a hybrid excited synchronous machine having permanent magnets on q-axis and a dc excitation on daxis. Using th...... electrical degrees in less than 2 ms test time....

a Study on the Mechanism of OCCUPANT'S Cervical Injury by Low Speed Rear-End Collision of Automobiles

Science.gov (United States)

Cho, Wonhak; Kim, Yongchul; Choi, Hyeonki

Neck injury in rear-end car collisions is an increasing concern in the field of traffic safety. This injury commonly occurs at rear-end impact, however the injury mechanisms for whiplash remain a mystery. The purpose of this study is to quantitatively analyze the head and neck kinematics during the low-speed rear-end impact of automobiles. It is important to produce data that is related as closely as possible to the in vivo situation. So, we performed a sled test which simulated rear-end impacts with a velocity of 0.6 m/s with five normal healthy male subjects. 3-D motion analysis system was used to document motion data of two situations. When we compare the values of angular velocity and acceleration of head and neck, the peak magnitudes of inclined seated posture were smaller than those of upright seated posture. The result of this study is expected to provide insight that will aid in determining the mechanism of whiplash which is crucial to the identification of possible injury mechanisms.

Scientific and technical guidance on foods for special medical purposes in the context of Article 3 of Regulation (EU) No 609/20131

DEFF Research Database (Denmark)

Sjödin, Anders Mikael

2015-01-01

Following a request from the European Commission, the EFSA Panel on Dietetic products, Nutrition and Allergies (NDA) was asked to provide scientific and technical guidance on foods for special medical purposes in the context of Article 3 of Regulation (EU) No 609/2013. The guidance presented...... from the evaluation of dossiers for specific food products notified as FSMP, and in the light of future Community guidelines and legislation. The scope of this guidance is limited to FSMPs in the context of Article 3 of Regulation (EU) No 609/2013. Out of the scope of this guidance are: a) other...

Bildgebendes Multispektralsystem zur Serienfarbmessung an goniochromatischen Oberflächenbeschichtungen in der Automobil- und Zulieferindustrie

OpenAIRE

Jäger, Stefan

2006-01-01

In dieser Arbeit wird ein multispektrales bildgebendes System zur Farbmessung von Metall- und Perleffektlacken in einem industriellen Umfeld vorgestellt. Der Zweck des vorgeschlagenen Systems ist die Serienüberwachung und daraus folgend, die Steuerung von Lackierprozessen in der Automobil- und Zulieferindustrie, um das Qualitätsniveau anzuheben und Kosten zu reduzieren. Ausgehend von der Analyse der messtechnischen Anforderungen und den durch die Prozesstechnik gegebenen Randbedingungen wurde...

Wind power demonstration and siting problems. [for recharging electrically driven automobiles

Science.gov (United States)

Bergey, K. H.

1973-01-01

Technical and economic feasibility studies on a small windmill to provide overnight charging for an electrically driven car are reported. The auxiliary generator provides power for heating and cooling the vehicle which runs for 25 miles on battery power alone, and for 50 miles with the onboard charger operating. The blades for this windmill have a diameter of 12 feet and are coupled through to a conventional automobile alternator so that they are able to completely recharge car batteries in 8 hours. Optimization of a windmill/storage system requires detailed wind velocity information which permits rational sitting of wind power system stations.

Características estruturais, relacionais e gerenciais na cadeia de suprimentos de um condomínio industrial na indústria automobilística

OpenAIRE

Pires,Sílvio Roberto Ignácio; Sacomano Neto,Mário

2010-01-01

Nas últimas décadas, a contribuição da indústria automobilística tem sido muito representativa em termos de inovações na gestão da cadeia de suprimentos, tais como aquelas contempladas nos modelos de consórcio modular e de condomínio industrial. Este artigo apresenta os resultados de uma pesquisa envolvendo diferentes configurações na estrutura de relacionamento entre uma montadora de automóveis e alguns de seus fornecedores, em uma cadeia de suprimentos da indústria automobilística que utili...

Visions for the car of the future; Visionen fuer das Automobil der Zukunft

Energy Technology Data Exchange (ETDEWEB)

Leschke, H. [DaimlerChrysler AG, Sindelfingen (Germany)

2000-07-01

The car is 115 years old. Where is it heading on its journey through time which has - up until now - been more evolutionary than revolutionary? The criterion will be to achieve advantages for our customers, and we must channel all our efforts into doing so. 'Emotional' - and therefore 'irrational' feelings - stand in opposition to this rational criterion. A car must please, otherwise it simply will not sell. And let us not forget the 'brand-specific' aspect of car design, which is perceived in a very emotional way. Our profession - and therefore our professionalism too - must see to it that the laws of aesthetics remain on a comprehensible scale, but must develop further from the point of view of different cultures, their development thus far and a general global rapprochement. Design is allowed to provoke, to intrigue our customers; it must arouse emotions. Both emotion and provocation lead to polarity. On balance: there will be something for everyone, a variety of different concepts and designs as a way of portraying one's own individuality in a motoring medley. The basic prerequisite: we should still find driving a car fun - even in the year 2000. (orig.) [German] Das Automobil ist 115 Jahre alt. Wohin geht seine bisherige, eher evolutionaere als revolutionaere Reise? Kundennutzen wird das Kriterium sein, dem sich all unser Tun stellen muss. Diesem rationalen Kriterium steht das 'Emotionale' und damit eher 'Irrationale' gegenueber. Ein Automobil muss gefallen, sonst wird es nicht gekauft. Vergessen wir nicht das sehr emotional wahrgenommene 'Markenspezifische' Automobil-Design. Unsere Profession, und damit auch unsere Professionalitaet, muessen Sorge tragen, dass die Gesetze der Aesthetik in einem nachvollziehbaren Rahmen bleiben, sich aber unter dem Aspekt der unterschiedlichen Kulturen, deren bisheriger Entwicklung und weltweiten Annaeherung weiterentwickeln muessen. Design darf provozieren

Recipe and technology development for minced canned products of special purpose based on the underutilized north region fishery object (thorny skate

Directory of Open Access Journals (Sweden)

Raibulov S. P.

2016-09-01

Full Text Available The paper presents the results of justifying the use of thorny skate in the technology of minced meat canned products of special purpose. The key criterion determined the specialized purpose of canned food is the high content of physiologically functional food ingredient of chondroitin sulfate in the cartilage of thorny skate wings. The high content of chondroitin sulfate in raw materials ensures that the content of the physiologically functional ingredient in the finished canned food will be at the level from 220 to 250 mg per 100 g of product. The method of IR blanching is presented for removing urea from the thorny skate muscle tissue. To confirm the efficiency of the developed method of urea removal, it has been proposed to use a modified photocolorimetric method for determination of mass fractions of urea in feed flour according to the governmental standard GOST R 50032–92 "Feed flour made of fish, marine mammals, crustaceans and invertebrates. Methods of determining the mass fraction of urea and calculation of the crude protein with a given mass fraction of carbamide". With the help of this technique, the efficiency of urea removal from the thorny skate tissue by the proposed method has been determined. The residual urea content in the meat of thorny skate after IR blanching is 0.76 %, which is two times lesser than border value of sensitivity of the person (approximated as 1.2 %. The paper presents the materials of experimental substantiation of optimum formulation of new canned meat based on the method of fuzzy modeling. The ratio of the main components of the meatballs recipe (thorny skate and Atlantic cod close to the optimum is 48 % by weight of meat for each component separately.

Parking infrastructure: energy, emissions, and automobile life-cycle environmental accounting

Energy Technology Data Exchange (ETDEWEB)

Chester, Mikhail; Horvath, Arpad; Madanat, Samer, E-mail: mchester@cal.berkeley.edu, E-mail: horvath@ce.berkeley.edu, E-mail: madanat@ce.berkeley.edu [Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley CA 94720 (United States)

2010-07-15

The US parking infrastructure is vast and little is known about its scale and environmental impacts. The few parking space inventories that exist are typically regionalized and no known environmental assessment has been performed to determine the energy and emissions from providing this infrastructure. A better understanding of the scale of US parking is necessary to properly value the total costs of automobile travel. Energy and emissions from constructing and maintaining the parking infrastructure should be considered when assessing the total human health and environmental impacts of vehicle travel. We develop five parking space inventory scenarios and from these estimate the range of infrastructure provided in the US to be between 105 million and 2 billion spaces. Using these estimates, a life-cycle environmental inventory is performed to capture the energy consumption and emissions of greenhouse gases, CO, SO{sub 2}, NO{sub X}, VOC (volatile organic compounds), and PM{sub 10} (PM: particulate matter) from raw material extraction, transport, asphalt and concrete production, and placement (including direct, indirect, and supply chain processes) of space construction and maintenance. The environmental assessment is then evaluated within the life-cycle performance of sedans, SUVs (sports utility vehicles), and pickups. Depending on the scenario and vehicle type, the inclusion of parking within the overall life-cycle inventory increases energy consumption from 3.1 to 4.8 MJ by 0.1-0.3 MJ and greenhouse gas emissions from 230 to 380 g CO{sub 2}e by 6-23 g CO{sub 2}e per passenger kilometer traveled. Life-cycle automobile SO{sub 2} and PM{sub 10} emissions show some of the largest increases, by as much as 24% and 89% from the baseline inventory. The environmental consequences of providing the parking spaces are discussed as well as the uncertainty in allocating paved area between parking and roadways.

The Role of Technical Innovation and Sustainability on Energy Consumption: A Case Study on the Taiwanese Automobile Industry

Directory of Open Access Journals (Sweden)

Chao-Wu Chou

2015-06-01

Full Text Available The impact of global warming and climate change is one of the most critical challenges of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. The continuous improvement in automobile energy consumption is one of the most effective ways to reduce global warming. A comparative analysis is proposed to examine the various automobiles that utilize technological innovation to improve their energy consumption. Their contribution to CO2 emissions is then investigated. This study focuses on technical innovation and output power of a conventional engine. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi have improved energy consumption and reduce CO2 emissions. In addition, the Toyota hybrid vehicles have also improved energy consumption and reduced greenhouse gases emissions.

Benchmarks of programming languages for special purposes in the space station

Science.gov (United States)

Knoebel, Arthur

1986-01-01

Although Ada is likely to be chosen as the principal programming language for the Space Station, certain needs, such as expert systems and robotics, may be better developed in special languages. The languages, LISP and Prolog, are studied and some benchmarks derived. The mathematical foundations for these languages are reviewed. Likely areas of the space station are sought out where automation and robotics might be applicable. Benchmarks are designed which are functional, mathematical, relational, and expert in nature. The coding will depend on the particular versions of the languages which become available for testing.

Tungsten carbide and tungsten-molybdenum carbides as automobile exhaust catalysts

International Nuclear Information System (INIS)

Leclercq, L.; Daubrege, F.; Gengembre, L.; Leclercq, G.; Prigent, M.

1987-01-01

Several catalyst samples of tungsten carbide and W, Mo mixed carbides with different Mo/W atom ratios, have been prepared to test their ability to remove carbon monoxide, nitric oxide and propane from a synthetic exhaust gas simulating automobile emissions. Surface characterization of the catalysts has been performed by X-ray photoelectron spectroscopy (XPS) and selective chemisorption of hydrogen and carbon monoxide. Tungsten carbide exhibits good activity for CO and NO conversion, compared to a standard three-way catalyst based on Pt and Rh. However, this W carbide is ineffective in the oxidation of propane. The Mo,W mixed carbides are markedly different having only a very low activity. 9 refs.; 10 figs.; 5 tabs

Aptitude visuelle à la conduite automobile: exemple des candidats au permis de conduire à Libreville

Science.gov (United States)

Souhail, Hassane; Assoumou, Prudence; Birinda, Hilda; Mengome, Emmanuel Mve

2015-01-01

L'objectif était d’évaluer l'aptitude visuelle à la conduite automobile des candidats au permis de conduire à Libreville. Il s'agissait d'une étude transversale, descriptive et analytique, qui s'est déroulée à Libreville pendant la période du 4 avril 2012 au 14 juillet 2012 (soit 4 mois et 10 jours). La population d’étude concernait les candidats soumis aux épreuves d'obtention du permis de conduire. Nous avons inclus dans notre travail, les candidats, ayant donné leur consentement par écrit et exclus ceux refusant d'adhérer à l'enquête. Les variables étudiées concernaient l’âge, le sexe, la population d’étude, l'activité professionnelle, l'acuité visuelle de loin et de près, la vision des couleurs, la catégorie du permis de conduire, et l'aptitude visuelle à la conduite automobile. La saisie et l'analyse des données ont été collectées au moyen d'une fiche d'enquête standardisée; après vérification et validation, elles ont été saisies sur le logiciel Excel Windows et analysées sur le logiciel Epi Info version 3.5.1. L’âge moyen des 406 candidats était de 29 ans ± 6,65 ans avec des extrêmes allant de 17 ans à 52 ans. Les hommes représentaient 283 (69,7%) et les femmes 123 (30,3%), soit un ratio de 2,3. Les fonctionnaires étaient retrouvés dans 39,4 % des cas, suivi des élèves-étudiants dans 33,5%. Dans notre population d’étude, 71 sur 406 candidats avaient une baisse de l'acuité visuelle de loin, soit 17,5%. Dans notre série, nous avons retrouvés 34 candidats âgés de 40 ans et plus, et seulement 14 candidats (41,2%) avaient une baisse de l'acuité visuelle de près. La quasi-totalité des patients avaient une vision de couleurs normale (99,5%), cependant 2 candidats avaient une vision de couleurs anormale, soit une prévalence de 0,5%. Dans notre échantillon, 403 (99,3%) sollicitaient un permis de conduire de catégorie léger (perms A, A1, B, F) et 3 (0,7%) sollicitaient un permis de conduire de type

Supply Chain Management in The Brazilian Automobile Industry: Bottlenecks for Steadier Growth

Directory of Open Access Journals (Sweden)

W. F. Sorte Junior

2011-06-01

Full Text Available Taking the Lean Production System as the reference model, this paper analyses the supply chain management approach and the relationship between private and public sectors in the Brazilian automobile industry. Through a case study conducted from October 2006 to October 2008 in a private owned automaker, two bottlenecks in this Brazilian industrial sector are identified: (1 Emphasis on coordination rather than integration in supply chain management; and (2 Insufficient channels of communication between private and public sectors, resulting in inefficient policies to nurture automakers with low production volume.

Supplier selection in automobile industry: A mixed balanced scorecard–fuzzy AHP approa

Directory of Open Access Journals (Sweden)

Masoud Rahiminezhad Galankashi

2016-03-01

Full Text Available This study proposed an integrated Balanced Scorecard–Fuzzy Analytic Hierarchical Process (BSC–FAHP model to select suppliers in the automotive industry. In spite of the vast amount of studies on supplier selection, the evaluation and selection of suppliers using the specific measures of the automotive industry are less investigated. In order to fill this gap, this research proposed a new BSC for supplier selection of automobile industry. Measures were gathered using a literature survey and accredited using Nominal Group Technique (NGT. Finally, a fuzzy AHP was used to select the best supplier.

The choice of leasing companies for automobile fleet updating on the basis of hierarchies analysis method

OpenAIRE

Dorohov, А.

2007-01-01

The basic criteria of leasing companies choice by the transport enterprises for automobile fleet updating such as terms of financing, size of advance, assortment time of existence at the market, have been determined. The determination of the best leasing company according to these parameters on the basis of hierarchies analysis method has been offered.

Role of Multinational Corporations in Automobile Industries: A Comparative Study Between India and Mexico

Directory of Open Access Journals (Sweden)

Ganesh Babu Kumaran

2008-10-01

Full Text Available Role of Multinational Corporations ( MNC’s in developing countries is not new in the arena of International business and global macroeconomics. One of the most significant economic developments of recent decades is the economic LPG process (Liberalisation, Privatisation and Globalisation is reflected in the rapid growth in international trade and the surge in Foreign Direct Investment (FDI. This process is to a large extent driven by new investments from multinational corporations. A rapidly growing share of MNC’s in India and Mexico in last decade was evident in various sector and in particular to automobile sector. Multinational Corporations are seeking to exploit the vast but also precarious market potentials in these emerging economies. Simultaneously, India and Mexico are increasingly embarking on economic development strategies aimed at attracting MNC’s Foreign Direct Investment as a means to access technology, capital, organizational and marketing know how, etc. This study does comparative analyses on the performance of automobile sector in India and Mexico, mainly in passenger car and Utility vehicles sector. It examines the impact and the role of MNC’s in these economies since 1990’s, with derived empirical quantitative and qualitative data analysis that would illustrate and reinforce some of the contemporary status.

REGIONALIZATION AND INTRA-INDUSTRY TRADE. AN ANALYSIS OF AUTOMOBILE INDUSTRY TRADE IN NAFTA

OpenAIRE

Sylvie MONTOUT; Jean-Louis MUCCHIELLI; Soledad ZIGNAGO

2002-01-01

As was shown in some previous studies, the creation of the North American Free Trade American (NAFTA) has significantly increased trade and investment flows between member countries. Consequently, it seems appropriate to analyze the incidences of the free trade agreement on the nature of trade. In this paper, we study the intra-industry trade in the automobile industry within the NAFTA area. Our results highlight an increase in intra-industry trade since the beginning of the 1990s. The import...

27 CFR 70.144 - Special rules.

Science.gov (United States)

2010-04-01

..., under local law, one person is subrogated to the rights of another with respect to a lien or interest, such person shall be subrogated to such rights for purposes of any lien imposed by 26 U.S.C. 6321 or... Excise and Special (Occupational) Tax Lien for Taxes § 70.144 Special rules. (a) Actual notice or...

Research on the Intelligent Control and Simulation of Automobile Cruise System Based on Fuzzy System

Directory of Open Access Journals (Sweden)

Xue-wen Chen

2016-01-01

Full Text Available In order to improve the active safety driving vehicle and alleviate the intension of driving fatigue, an intelligent control strategy of automobile cruise is put forward based on the throttle or braking pedal combined control adopting the fuzzy control theory. A fuzzy logic controller is presented, which consists of the two input variables, the deviation of the theoretical safe distance and relative distance and the relative velocity between the preceding vehicle and the cruise vehicle, and the single output variable, that is, the throttle opening or the braking pedal travel. Taking the test data of 1.6 L vehicle with auto-transmission as an example, the function on the intelligent cruise control system is simulated adopting MATLAB/Simulink aiming at different working conditions on the city road. The simulation results show that the control strategy possesses integrated capability of automated Stop & Go control, actively following the preceding vehicle on the conditions of keeping the safety distance and the constant velocity cruise. The research results can offer the theory and technology reference for setting dSPACE type and developing the integrated control product of automobile cruise system.

Dynamics of general and specially trained of women-weightlifters at the stage of specialized basic training

Directory of Open Access Journals (Sweden)

Viktor Slobodyanuk

2015-04-01

Full Text Available Purpose: to determine the dynamics of the general and special training of women-weightlifters different groups weight categories for annual macrocycle at the stage of specialized basic training. Materials and Methods: indexes long jump, running 30 meters, push-ups, jumps on how Abalakova index and wrist strength athletes different schools of Ukraine. Results: found dynamic indicators of general and special training of women-weightlifters different groups weight categories at the stage of basic training six specialized schools in Ukraine. Conclusions: the results of the study provide an opportunity to consider certain indicators in planning differentiated training programs to improve the training process athletes for women-weightlifters at the stage of specialized basic training different groups weight categories in the annual macrocycle.

The effect of specialization on operational performance

DEFF Research Database (Denmark)

Halkjær, Søren; Lueg, Rainer

2017-01-01

-methods approach that includes proprietary data from the management control system of the hospital, public documentation on the policy change, as well as interviews with key informants. These data suggest that operational deficiency is related to the fact that specialization was externally enforced through......Purpose - The purpose of this paper is to analyze how specialization in hospitals affects operational performance, measured by the length of stay and readmission rate. The authors assess a public policy change in the Danish healthcare sector from 2011 which required that some hospital services had...

Manganese concentrations in the air of the Montreal (Canada) subway in relation to surface automobile traffic density

Energy Technology Data Exchange (ETDEWEB)

Boudia, Nacera; Gareau, Lise; Zayed, Joseph [GRIS Interdisciplinary Health Research Group, University of Montreal (Canada); Halley, Renee [Transport Montreal Society (Canada); Kennedy, Greg [Department of Engineering Physics, Ecole Polytechnique de Montreal, Montreal (Canada); Lambert, Jean [Department of Social and Preventive Medicine, Faculty of Medicine, University of Montreal (Canada)

2006-07-31

Methylcyclopentadienyl manganese tricarbonyl (MMT) is an organic derivative of manganese (Mn), used since 1976 in Canadian gasoline as an octane enhancer. Its combustion leads to the emission of Mn particles. Several studies carried out by our research group have established a correlation between atmospheric Mn concentrations and automobile traffic density, suggesting that MMT in gasoline could play a significant role. This study aims to measure Mn concentrations in the air of the underground subway in Montreal (Canada) and to examine the relation with nearby surface automobile traffic density and, by extension, with the use of MMT in gasoline. Three subway stations were chosen for their location in different microenvironments with different traffic densities. Respirable (MnR<5 {mu}m) and total Mn (MnT) were sampled over two weeks, 5 days/week, 12 h/day. For the station located in the lower traffic density area, relatively low levels of MnR and MnT were found, with averages of 0.018 and 0.032 {mu}g/m{sup 3}, respectively. These concentrations are within the range of the background levels in Montreal. For the other two stations, the average concentrations of MnR were twice as high and exceeded the US EPA reference concentration of 0.05 {mu}g/m{sup 3}. Although there may be several sources of Mn from different components of the subway structure and vehicles, no correlation was found between subway traffic and atmospheric Mn in the subway. Since the air in the underground subway is pumped directly from outside without filtration, our findings strongly suggest that the combustion of MMT in automobiles is an important factor. (author)

Cross-Border Labor Organizing in the Garment and Automobile Industries: The Phillips Van-Heusen and Ford Cuautitlan Cases

Directory of Open Access Journals (Sweden)

Ralph Armbruster

2015-08-01

Full Text Available The globalization of the world economy has created new opportunities for cross-border labor organizing. In this paper I examine two case studies of cross -border labor organizing. One case involves Phillips Van-Hernen (PVH workers in Guatemala City, and the other Ford automobile workers in Cuautitlan, Mexico. The PVH case illustrates the potential for cross-border labor organizing in the highly mobile garment industry. The PVH workers' union and their cross-border allies adopted a "strategic cross-border organizing model" that included consumer and trade pressure, an active international trade secretariat, and several other strategies, to achieve an amazing victory. However, the Ford Cuautitlan case demonstrates that corporatist state-labor relations and internal union conflicts have limited cross-border organizing in the automobile industry. These two case studies and their different outcomes have many important lessons for academics and activists interested in cross-border labor organizing.

Special protective concretes

International Nuclear Information System (INIS)

Bouniol, P.

2001-01-01

Concrete is the most convenient material when large-scale radiation protection is needed. Thus, special concretes for nuclear purposes are used in various facilities like reactors, reprocessing centers, storage sites, accelerators, hospitals with nuclear medicine equipment, food ionization centers etc.. The recent advances made in civil engineering for the improvement of concrete durability and compactness are for a large part transposable to protection concretes. This article presents the basic knowledge about protection concretes with the associated typological and technological aspects. A large part is devoted to the intrinsic properties of concretes and to their behaviour in irradiation and temperature conditions: 1 - definition and field of application of special protective concretes; 2 - evolution of concepts and technologies (durability of structures, techniques of formulation, new additives, market evolution); 3 - design of protective structures (preliminary study, radiation characteristics, thermal constraints, damping and dimensioning, mechanical criteria); 4 - formulation of special concretes (general principles, granulates, hydraulic binders, pulverulent additives, water/cement ratio, reference composition of some special concretes); 5 - properties of special concretes (damping and thermo-mechanical properties); 6 - induced-irradiation and temperature phenomena (activation, radiolysis, mineralogical transformations, drying, shrinking, creep, corrosion of reinforcement). (J.S.)

Can the periphery achieve core? The case of the automobile components industry in Spain

OpenAIRE

Lampón, Jesús F.; Lago-Peñas, Santiago; Cabanelas, Pablo

2013-01-01

The paper analyses changes experienced by Spain, as a European Peripheral region, in the spatial concentration of value-added and high-skill activities, and generation of technology in the automobile components industry. The analysis of plants set up (investments) and relocated (divestments) by multinationals (MNEs) between 2001 and 2010 show that Spain is no longer a place for labour-intensive activities and standardized processes using simple technologies in comparison to other peripheral r...

Who is exposed to gas prices? How gasoline prices affect automobile manufacturers and dealerships

OpenAIRE

Silva-Risso, Jorge; Zettelmeyer, Florian; Busse, Meghan R.; Knittel, Christopher Roland

2016-01-01

Many consumers are keenly aware of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper, by contrast, we investigate how gasoline prices affect the automobile industry: manufacturers and dealerships. We estimate how changes in gasoline prices affect equilibrium prices and sales of both new and used vehicles of different fuel economies. We investigate the implications of these effects for individual auto manufacturers, taking into account differences...

Who is exposed to gas prices? How gasoline prices affect automobile manufacturers and dealerships

OpenAIRE

Busse, Meghan R.; Kittel, Christopher R.; Zettelmeyer, Florian

2012-01-01

Many consumers are keenly aware of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper, by contrast, we investigate how gasoline prices affect the automobile industry: manufacturers and dealerships. We estimate how changes in gasoline prices affect equilibrium prices and sales of both new and used vehicles of different fuel economies. We investigate the implications of these effects for individual auto manufacturers, taking into account differences...

Imitating model of the electronic regulator frequencies of rotation of the automobile diesel engine

OpenAIRE

Тырловой, С. И.

2011-01-01

The imitating model of an frequency electronic regulator of rotation of high-speed diesel engine an automobile diesel engine with the distributive fuel pump of Bosch company is resulted. Is executed simulation transitive modes of a diesel engine with mechanic and electronic regulators. Deterioration influence plungers steams on dinamic and economic indicators of a diesel engine is analysed. Operational indicators of a diesel engine with mechanic and electronic regulators are compared. The obt...

FY 2000 report on the research cooperation project - Research cooperation in developmental support for oil producing countries. Joint project for the technology development for automobile maintenance in Saudi Arabia; 2000 nendo san'yukoku kaihatsu shien kenkyu kyoryoku jigyo seika hokokusho. Saujiarabia jidosha seibi gijutsu kaihatsu kyodo project

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

For the purpose of spreading the technology for automobile maintenance in Saudi Arabia, an investigational study was made of the actual state of the automobile utilization environment in Saudi Arabia. In Saudi Arabia, air pollution is becoming a serious problem with the rapid progress of motorization, and measures for automobile maintenance technology should be taken such as the use of lead-free gasoline, spread of catalyst car and introduction of new engine technology. However, the number of able car mechanics with Saudi Arabian nationality is low, and they rely on workers from other countries for it. Further, usually people continuously drive cars at high speed under the severe environment where there are high temperature, solar radiation, dust, etc. As a result of the study, the following were cited as the maintenance technology of which the R and D are expected: technology for lead-free gasoline, basic education for electronics, technology for use of trouble diagnosis unit, technology of preventive maintenance supposing high speed traveling, technology for recycle use of parts, standards for maintenance of rubber parts, establishment of standards of maintenance of Saudi Arabia's own, making of technical books/data to be needed for training of Saudi Arabian engineers. (NEDO)

Special Purpose Systems

Science.gov (United States)

2017-01-30

Sign-off Memorandum to the NWEC Consortium Management Firm. The Sign-off Memorandum will be used to verify that all submissions are technically...the Windstream Task 366. 08/01/2016 Purchased ½” Drive Impact drill and socket sets from Amazon in support of the Windstream Task 366. 08/01...for a MakerBot from MakerBot in Support of Task MJU. 01/12/2017 Purchased Network Switch from BlackBox in support of the 366 Tasking. 10

Pressure pain thresholds and musculoskeletal morbidity in automobile manufacturing workers.

Science.gov (United States)

Gold, Judith E; Punnett, Laura; Katz, Jeffrey N

2006-02-01

Reduced pressure pain thresholds (PPTs) have been reported in occupational groups with symptoms of upper extremity musculoskeletal disorders (UEMSDs). The purpose of this study was to determine whether automobile manufacturing workers (n=460) with signs and symptoms of UEMSDs had reduced PPTs (greater sensitivity to pain through pressure applied to the skin) when compared with unaffected members of the cohort, which served as the reference group. The association of PPTs with symptom severity and localization of PE findings was investigated, as was the hypothesis that reduced thresholds would be found on the affected side in those with unilateral physical examination (PE) findings. PPTs were measured during the workday at 12 upper extremity sites. A PE for signs of UEMSDs and symptom questionnaire was administered. After comparison of potential covariates using t tests, linear regression multivariable models were constructed with the average of 12 sites (avgPPT) as the outcome. Subjects with PE findings and/or symptoms had a statistically significant lower avgPPT than non-cases. AvgPPT was reduced in those with more widespread PE findings and in those with greater symptom severity (test for trend, P

Innovative design method of automobile profile based on Fourier descriptor

Science.gov (United States)

Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

2017-10-01

Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

A Low-Cost Data Acquisition System for Automobile Dynamics Applications.

Science.gov (United States)

González, Alejandro; Olazagoitia, José Luis; Vinolas, Jordi

2018-01-27

This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in <80 Hz data acquisition in vehicle dynamics, using low-cost accelerometers. In addition to this, a comparative study is carried out of professional vibration acquisition technologies and low-cost systems, obtaining optimum results for low- and medium-frequency operations with an error of 2.19% on road tests. It is therefore concluded that these technologies are applicable to the automobile industry, thereby allowing the project costs to be reduced and thus facilitating access to this kind of research that requires limited resources.

An empirical and model study on automobile market in Taiwan

Science.gov (United States)

Tang, Ji-Ying; Qiu, Rong; Zhou, Yueping; He, Da-Ren

2006-03-01

We have done an empirical investigation on automobile market in Taiwan including the development of the possession rate of the companies in the market from 1979 to 2003, the development of the largest possession rate, and so on. A dynamic model for describing the competition between the companies is suggested based on the empirical study. In the model each company is given a long-term competition factor (such as technology, capital and scale) and a short-term competition factor (such as management, service and advertisement). Then the companies play games in order to obtain more possession rate in the market under certain rules. Numerical simulation based on the model display a competition developing process, which qualitatively and quantitatively agree with our empirical investigation results.

Supporting Novice Special Education Teachers through Quality Professional Development

Science.gov (United States)

Tate, Mary E.

2013-01-01

The special education teaching environment is a teaching environment with unique duties that often challenge novice special education teachers. The purpose of this qualitative case study was to gain clarity of the work environment of special education teachers to uncover professional development practices that would work to support them. Research…

The Historical Evolution and Current Interpretation of the Definition of Essence of the Category of «Competitiveness of Enterprise of the Automobile Industry»

Directory of Open Access Journals (Sweden)

Shevchenko Inna Yu.

2018-01-01

Full Text Available The article is aimed at researching the historical evolution and a current interpretation of the definition of essence of the category of «competitiveness of enterprise of the automobile industry». Using the monographic analysis, the article reviews the historical evolution of the definition of essence of the category of «competitiveness of enterprise» in the national scientific literature in the period from 2007 to 2016. It has been concluded that the essence of the concept of «competitiveness of enterprise» is actually reduced to the competitiveness of products or operational efficiency. The author’s own definition of the essence of the category of «competitiveness of enterprise of the automobile industry» has been suggested: it has been specified that under the given term be understood «...the dynamic ability of enterprise of the automobile industry to ensure the efficiency of all activities as result of interaction of the internal competitive potential and the external competitive environment factors in accordance with the chosen competitive strategy at a certain stage of the life cycle».

Alternative Antriebe für Automobile: Hybridsysteme, Brennstoffzellen, alternative Energieträger

Science.gov (United States)

Stan, Cornel

Über die Realisierungsmöglichkeiten zukünftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor über Brennstoffzellen bis zu alternativen Energieträgern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualität eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geräusche sind dafür wichtige Merkmale zur Qualitätsbeurteilung. Die Verfügbarkeit und die Speicherfähigkeit vorgesehener Energieträger, die technische Komplexität, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen für die Einführung realisierbarer Konzepte alternativer Antriebe für Automobile stellen.

Recent development of non-oriented electrical steel sheet for automobile electrical devices

International Nuclear Information System (INIS)

Oda, Yoshihiko; Kohno, Masaaki; Honda, Atsuhito

2008-01-01

This paper describes non-oriented electrical steel sheet for automobile motors and reactors. Electrical steel sheets for energy efficient motors show high magnetic flux density and low iron loss. They are suitable for HEV traction motors and EPS motors. A thin-gauge electrical steel sheet and a gradient Si steel sheet show low iron loss in the high-frequency range. Therefore, the efficiency of high-frequency devices can be greatly improved. Since a 6.5% Si steel sheet possesses low iron loss and zero magnetostriction, it contributes to reduce the core loss and audible noise of high-frequency reactors

The Intergenerational Transmission of Automobile Brand Preferences: Empirical Evidence and Implications for Firm Strategy

OpenAIRE

Soren T. Anderson; Ryan Kellogg; Ashley Langer; James M. Sallee

2013-01-01

We document a strong correlation in the brand of automobile chosen by parents and their adult children, using data from the Panel Study of Income Dynamics. This correlation could represent transmission of brand preferences across generations, or it could result from correlation in family characteristics that determine brand choice. We present a variety of empirical specifications that lend support to the former interpretation and to a mechanism that relies at least in part on state dependence...

Treatment of waste water miscible cutting fluids in automobile manufacturing; Jidosha kogyo ni okeru suiyosei sessakuyuzai no haieki shori

Energy Technology Data Exchange (ETDEWEB)

Ono, H. [Yushiro Chemical Industry Co. Ltd., Tokyo (Japan)

1995-09-01

Water-soluble cutting fluids are able to be used for several months to several years if the proper periodical management is carried out. However, the used solution should be treated as waste water when the function-recovery thereof becomes remarkable difficult. On this occasion, the treated solution (drainage) ought to meet the environmental standards prescribed for the purpose of protecting globe environment. Many cases in Japan are that the strict rules are set by each urban and rural prefectures addition to the government ordinance. For carrying out the treatment of waste water efficiently, it is necessary to construct the treating system by mastering the characteristics of waste water and selecting the most suitable one from numerous treating methods. In this paper, after the description on the water-polluting substances and drainage standards, the general treating method of waste water miscible cutting fluids is described. Finally, the concrete cases with respect to the treatment of waste water treatment in automobile manufacturing factories are introduced. 5 refs., 5 figs., 5 tabs.

Advances and trends of head-up and head-down display systems in automobiles

Science.gov (United States)

Betancur, J. Alejandro; Osorio-Gomez, Gilberto; Agudelo, J. David

2014-06-01

Currently, in the automotive industry the interaction between drivers and Augmented Reality (AR) systems is a subject of analysis, especially the identification of advantages and risks that this kind of interaction represents. Consequently, this paper attempts to put in evidence the potential applications of Head-Up (Display (HUD) and Head-Down Display (HDD) systems in automotive vehicles, showing applications and trends under study. In general, automotive advances related to AR devices suggest the partial integration of the HUD and HDD in automobiles; however, the right way to do it is still a moot point.

Concept for a Differential Lock and Traction Control Model in Automobiles

Science.gov (United States)

Shukul, A. K.; Hansra, S. K.

2014-01-01

The automobile is a complex integration of electronics and mechanical components. One of the major components is the differential which is limited due to its shortcomings. The paper proposes a concept of a cost effective differential lock and traction for passenger cars to sports utility vehicles alike, employing a parallel braking mechanism coming into action based on the relative speeds of the wheels driven by the differential. The paper highlights the employment of minimum number of components unlike the already existing systems. The system was designed numerically for the traction control and differential lock for the world's cheapest car. The paper manages to come up with all the system parameters and component costing making it a cost effective system.

40 CFR 421.251 - Specialized definitions.

Science.gov (United States)

2010-07-01

... AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Primary Precious Metals and Mercury Subcategory § 421.251 Specialized definitions. For the purpose of this subpart the general...

Mobility from tomorrow. Ideas and concepts; Mobilitaet von Morgen. Ideen und Konzepte

Energy Technology Data Exchange (ETDEWEB)

Heintzel, Alexander (comp.)

2012-10-15

The special edition ‚ATZagenda' of the magazine family ATZ, MTZ and ATZelektronik reports on issues heavily effecting the technical development of automobiles from an economic and entrepreneurial point of view. Under this aspect, twenty-eight contributions are presented in this special edition to the following aspects: Vision and reality; strategy; connected automobile; propulsion mix of the future; development and production; human resources; design and marketing; outlook; substitute fuels; regional sports.

Use of a special airbed for transporting injured persons

Energy Technology Data Exchange (ETDEWEB)

Hacker, R

1981-04-01

A description is given of a special airbed for the purpose of transporting injured persons, especially those with injuries to the spinal column. This special airbed moulds itself to the shape of the injured party. (In German)

Technical Feasibility Evaluation on The Use of A Peltier Thermoelectric Module to Recover Automobile Exhaust Heat

Science.gov (United States)

Sugiartha, N.; Sastra Negara, P.

2018-01-01

A thermoelectric module composes of integrated p-n semiconductors as hot and cold side junctions and uses Seebeck effect between them to function as a thermoelectric generator (TEG) to directly convert heat into electrical power. Exhaust heat from engines as otherwise wasted to the atmosphere is one of the heat sources freely available to drive the TEG. This paper evaluates technical feasibility on the use of a Peltier thermoelectric module for energy recovery application of such kind of waste heat. An experimental apparatus has been setup to simulate real conditions of automobile engine exhaust piping system. It includes a square section aluminium ducting, an aluminium fin heat sink and a TEC1 12706 thermoelectric module. A heater and a cooling fan are employed to simulate hot exhaust gas and ambient air flows, respectively. Electrical loading is controlled by resistors. Dependent variables measured during the test are cold and hot side temperatures, open and loaded circuit output voltages and electrical current. The test results revealed a promising application of the Peltier thermoelectric module for the engine exhaust heat recovery, though the loaded output power produced and loaded output voltage are still far lower than the commercially thermoelectric module originally purposed for the TEG application.

Evacuating populations with special needs

Science.gov (United States)

2009-04-01

Evacuation operations are conducted under the authority of, and based on decisions by, local and state authorities. The purpose of this primer, Evacuating Populations with Special Needs, is to provide local and state emergency managers, government of...

Multinational automobile manufacture enterprise internationalization management strategy——take Toyota Automobile as example%跨国汽车制造企业国际化经营战略及启示——以丰田汽车为例

Institute of Scientific and Technical Information of China (English)

周文辉; 钱春丽

2011-01-01

本文以日本丰田汽车公司为研究对象,对其国际化经营轨迹和经营战略进行了比较研究。先对其国际化历程进行了追溯,进而提炼其国际化经营战略的共性特点,分析了其国际化经营的优势来源,最后结合我国汽车制造企业国际化发展现状给出我国同业企业国际化经营战略制定与实施的对策建议。%General Toyota of Japan were taken as examples for the purpose of comparison study on their processes and strategies in the course of globalization.Globalization processe was firstly introduced and then similarities in globalization strategie was drawn from history study.Sources of competitiveness was also analyzed.In the end suggestions on globalization were given to our local automobile manufacturers on the basis of environmental analysis.

Quality of Work Life: Perceptions of Jordanian Special Education Teachers

Science.gov (United States)

Al-Zboon, Eman K.; Al_Dababneh, Khuloud A. H.; Ahmad, Jamal

2015-01-01

The purpose of the current study was to investigate the level of quality of work life QOWL of Jordanian special education teachers. Participants of the study were 133 special education teachers. Results showed that special education teachers cited average level of QOWL. Furthermore, teachers rated administrators' and colleagues' respect as the…

Where have all the flowers gone? Forecasting green trends in the automobile industry with a choice-based conjoint adoption model

NARCIS (Netherlands)

Eggers, Felix; Eggers, Fabian

With rising gas prices, global warming, and green thinking, all-electric vehicles are currently considered the automobile technology of the future. However, besides their advantages electric drive trains also exhibit several disadvantages. Moreover, history shows several failed attempts to establish

40 CFR 405.81 - Specialized definitions.

Science.gov (United States)

2010-07-01

... STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other Dairy Desserts Subcategory § 405.81 Specialized definitions. For the purpose of this subpart: (a) Except...

Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

Science.gov (United States)

Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

2012-01-01

To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

Automobile simulation model and its identification. Behavior measuring by image processing; Jidosha simulation model to dotei jikken. Gazo kaiseki ni yoru undo no keisoku

Energy Technology Data Exchange (ETDEWEB)

Suzuki, H; Morita, S; Matsuura, Y [Osaka Sangyo University, Osaka (Japan)

1997-10-01

Model simulation technology is important for automobiles development. Especially, for the investigations concerning to ABS, TRC, VDC, and so on, the model should be the one which can simulates not only whole behaviors of the automobile, but also such internal information as torque, acceleration, and, velocity of each drive shafts, etc.. From this point of view, 4-wheels simulation model which can simulates almost over 50 items, was made. On the other hand, technique of 3-D image processing using 2 video cameras was adopted to identify the model. Considerably good coincidences were recognized between the simulated values and measured ones. 3 refs., 7 figs., 2 tabs.

Considerations regarding tax optimization in implanted multinational enterprises through external growth for the automobile industry in Central Eastern Europe

Directory of Open Access Journals (Sweden)

Nitu Antonie Renata

2008-04-01

Full Text Available The business strategy of multinational enterprises (MNEs from the automobile industry implanted in Central-Eastern European (CEE countries (Poland, Czech Republic and Romania is an offensive one, global from operational perspective. Mainly it aims the extension of market share through horizontal growth, generally external type single-domain (Mergers and Acquisitions and internal type (Greenfield investments in a lower degree. These enterprises put in practice also a defending strategy for the owned market shares through increasing the efficiency of the production network at global level. This paper aims to present the less evident aspects of tax optimization of the applied business strategy by implemented MNEs in the automobile industry in CEE, and in this context, the necessity to establish transfer prices in accordance with the OECD recommendations, as an obligation assessed by the tax legislations of the considered countries, but also from the necessity of efficient run of these enterprises.

Thermal energy storage for the Stirling engine powered automobile

Science.gov (United States)

Morgan, D. T. (Editor)

1979-01-01

A thermal energy storage (TES) system developed for use with the Stirling engine as an automotive power system has gravimetric and volumetric storage densities which are competitive with electric battery storage systems, meets all operational requirements for a practical vehicle, and can be packaged in compact sized automobiles with minimum impact on passenger and freight volume. The TES/Stirling system is the only storage approach for direct use of combustion heat from fuel sources not suitable for direct transport and use on the vehicle. The particular concept described is also useful for a dual mode TES/liquid fuel system in which the TES (recharged from an external energy source) is used for short duration trips (approximately 10 miles or less) and liquid fuel carried on board the vehicle used for long duration trips. The dual mode approach offers the potential of 50 percent savings in the consumption of premium liquid fuels for automotive propulsion in the United States.

How the conversations in social media concern in sales in the automobile industry in spain

OpenAIRE

González Carreño, Gema; Rejas Muslera, Ricardo; Padilla Fernández-Vega, Juan; Cepeda González, M.I

2013-01-01

Automobile Industry has great importance in the Spanish economy (8,7 % of the active Spanish population is employed in this sector).The above mentioned sector has been one of the principal sectors affected by the current economic crisis, consistently, the budgets in advertising have been severely limited (46,9 % less in the period of reference), these needs of reduction have originated a substantial change in the advertising strategy (from 2007 the increase of the advertising investment in In...

AOSSM Early Sport Specialization Consensus Statement

OpenAIRE

LaPrade, Robert F.; Agel, Julie; Baker, Joseph; Brenner, Joel S.; Cordasco, Frank A.; Côté, Jean; Engebretsen, Lars; Feeley, Brian T.; Gould, Daniel; Hainline, Brian; Hewett, Timothy E.; Jayanthi, Neeru; Kocher, Mininder S.; Myer, Gregory D.; Nissen, Carl W.

2016-01-01

© 2016 The Author(s). This is an Open Access article. Background: Early sport specialization is not a requirement for success at the highest levels of competition and is believed to be unhealthy physically and mentally for young athletes. It also discourages unstructured free play, which has many benefits. Purpose: To review the available evidence on early sports specialization and identify areas where scientific data are lacking. Study Design: Think tank, roundtable discussion...

An impending platinum crisis and its implications for the future of the automobile

International Nuclear Information System (INIS)

Yang, C.-J.

2009-01-01

The global demand for platinum has consistently outgrown supply in the past decade. This trend likely will continue and the imbalance may possibly escalate into a crisis. Platinum plays pivotal roles in both conventional automobile emissions control and the envisioned hydrogen economy. A platinum crisis would have profound implications on energy and environment. On the one hand, inadequate platinum supply will prevent widespread commercialization of hydrogen fuel-cell vehicles. On the other hand, expensive platinum may enhance the competitiveness of hybrid, plug-in hybrid, and battery-powered electric cars. Policymakers should weigh the potential impacts of a platinum crisis in energy policy.

CORPORATE SOCIAL RESPONSIBILITY IN THE AUTOMOBILE INDUSTRY IN SLOVAK REPUBLIC

Directory of Open Access Journals (Sweden)

Jana Vicianová

2011-01-01

Full Text Available At present, the corporate social responsibility should be seen not only in theory, but mainlyat the level of business practice. Companies that apply the concept of corporate socialresponsibility are aware not only of social and environmental benefits, but also theeconomic benefits that this approach brings. Assumptions of social responsibility are tomaximize the market value of the business provided that companies respect the laws andresponsibilities of owners, managers and employees. Benefits of the corporate socialresponsibility are not only companies and their stakeholders, but also society. This factinspires many large enterprises to start up a socially responsible business. The paper dealswith the corporate social responsibility concept and its implementation in the car industryin Slovak republic. The aim of the article is basically on the theories of corporate socialresponsibility to identify the level of application of this concept in automobile industry inSlovakia.

AUTOMOBILE AND SELFHOOD: CAR NARRATIVES IN TURKISH LITERATURE / OTOMOBİL VE BENLİK: TÜRK EDEBİYATINDA ARABA OLGUSU

Directory of Open Access Journals (Sweden)

Dr. Seyit Battal UĞURLU

2009-01-01

Full Text Available The automobile that entered into the Turkish novelwith Recaizâde Mahmut Ekrem's Car Affairs, in onerespect, is one of the status determinant in traditionalTurkish culture that has taken part instead of horse. Theautomobiles power is still measured as horse powerwhich has close psycho-cultural ties with the discourse of'horse, woman and the gun', that is considerable code oftraditional Turkish culture. Thinking its accreditation ofcapacity of speed performance it can be stressed thatautomobiles have changeable genders depending on menand women. When producing new models, cardesignator’s inspiration is greatly feminity and body ofwomen. Becoming one of the attractive ways of selfrealization of individuals, the automobile, protects usagainst lack of confidence of the external, presentsindividuals a lot of opportunities. Automobile’sattractiveness comes from its power to provide manypossibilities of supremacy over pedestrian way of life aswell as gigantic prosperous life style. The reflections ofthis important device of modern world seems in theTurkish literature parallel with social life. In YellowTractor by Talip Apaydın, Slender Rose of my Thought byAdalet Ağaoğlu, “The Clown Rusen” by Sevim Burak andIcy Swords by Latife Tekin narration can be mentioned afocus on human technology relation as a social fact. “TheCold” by Ömer Seyfettin, “The Spare Part of Civilization”by Aziz Nesin, and “Jaguar” by Peride Celâl focuses on automobile and its social reflections. A close scrutinyhas been conducted into cars as an important mediumof self identification within the context of modern man,its reflections in Turkish literature with provocativepsycho-social factors though a critical and analyticalpoint of view.

Is Automobile Dependence in Emerging Cities an Irresistible Force? Perspectives from São Paulo, Taipei, Prague, Mumbai, Shanghai, Beijing, and Guangzhou

Directory of Open Access Journals (Sweden)

Jeffrey R. Kenworthy

2017-10-01

Full Text Available This paper analyses seven metropolitan regions that are all experiencing rapid motorisation and are perhaps appearing to capitulate to the automobile. Through 20 years of changes, evidenced in systematic data from the mid-1990s, a different perspective is found. None of the urban regions appear near to or even capable of becoming automobile cities. Physical limits are already being reached that make higher levels of private motorised mobility very problematic if transport systems are to remain functional and the cities livable. These limits appear already to be reversing the decline in non-motorised modes and creating an upturn in transit systems, especially urban rail. That these cities have been able to either hold their own, or somewhat increase their share of total motorised mobility by transit over a 20-year period, is some indication that they are ‘hitting mobility walls’ much sooner in the motorisation path than cities in North America and Australia, which grew up with and were designed around the spatial needs of cars. Like many cities in the developed world that have shown a decoupling of car use and total passenger mobility from GDP growth from 1995 to 2005, there is now evidence that this is happening in less wealthy cities. This is important because it assists global and local goals for reduced CO2 from passenger transport, while allowing for economic progress. Such evidence suggests that automobile dependence is not an irresistible force in emerging economies.

A DEVICE FOR PURIFICATION OF OIL- AND FAT-CONTAINING GRAY WATERS FOR THE USE AT AUTOMOBILE LAUNDRIES AND PUBLIC CATERING ESTABLISHMENTS

International Nuclear Information System (INIS)

Makharoblidze, N.

2007-01-01

There is proposed a device (a filter) for the use at automobile lauundries and public catering establishments for local purification of waste waters containing oil products and/or fats before their draining into the municipal sewage system. (author)

Experimental investigations on automobile air conditioners working with R134a and R290/R600a as an alternative

Directory of Open Access Journals (Sweden)

Kandhaswamy Karthikeyan

2017-01-01

Full Text Available In this work, the performance of R134a based automobile air conditioning system has been evaluated by retrofitted with R290/R600a mixture (in the ratio of 50:50, by mass, as an alternative. The performance was evaluated at five different operating speeds (1000, 1500, 2000, 2500, and 3000, which covers the entire range of working conditions with four different cabin load (100, 200, 300, and 400 W. The condenser inlet air temperature was varied in the range between 30 and 50°C, which covers the entire climatic variations in Coimbatore city of India. The performance characteristics such as, refrigerating effect, coefficient of performance, compressor power consumption, and compressor discharge temperatures were considered for comparison. The results showed that, hydrocarbon mixture has faster cooling rate due to its high latent heat of vaporization, 5% higher coefficient of performance due to higher refrigeration effect, 8-10 K lower compressor discharge temperature due to its lower specific heat ratio with 5% lower compressor power consumption due to its lower viscosity and lower liquid density. The charge requirement of R290/R600a mixture is about 50% less compared to R134a. However, the mixture composition is considered as an interment replacement in automobile air conditioners due to composition shift under leak-age conditions. Hence, R290/R600a mixture is considered as an interim energy efficient and environment friendly option in R134a automobile air conditioners to extend its life.

[Clinical manifestations of lead levels in children exposed to automobile battery recycling processes in Soacha and Bogotá, D.C].

Science.gov (United States)

Hurtado, Carlos Mauricio; Gutiérrez, Myriam; Echeverry, Jairo

2008-03-01

Lead is a harmless metal if not handled directly in the industrial process. Even thought lead has been eliminated from the gasoline in many countries, automobile battery recycling continues to be a potential source of exposure and intoxication for the workers and their families, particularly of low income. The current investigation was initiated after an index case of lead poisoning was reported from Soacha, Cundinamarca, in central Colombia. Clinical investigation established lead levels and lead poison frequency in children with para-occupational lead exposure in the process of recycling automobile batteries. This was designed as a descriptive study, with selection of subjects with high risk of possible lead exposure. Minors, mostly of school age were recruited based on referral by relatives, neighbors or acquaintances, all of whom were involved in para-occupational exposure. Thirty two children, less than 12 years old (majority school age), were included. General and specific examinations of the children were made, and blood samples were taken for lead and hematological determinations. All subjects showed high levels of lead (2-9 times the maximum acceptable value) and, according to established criteria, two-thirds were rated as severely poisoned. The children with high levels of lead had tendency toward more specific hematological compromise and showing black gingival bordering (Burton border). This study communicates to the sanitary authorities and government a clear sign of alarm in that measures must be taken to diminish the occupational or para-occupational lead exposure of children by way of the automobile battery recycling industry.

Assessing location attractiveness for manufacturing automobiles

Energy Technology Data Exchange (ETDEWEB)

Hanawalt, Edward; Rouse, William

2017-07-01

Evaluating country manufacturing location attractiveness on various performance measures deepens the analysis and provides a more informed basis for manufacturing site selection versus reliance on labor rates alone. A short list of countries can be used to drive regional considerations for site-specific selection within a country. Design/methodology/approach: The two-step multi attribute decision model contains an initial filter layer to require minimum values for low weighted attributes and provides a rank order utility score for twenty three countries studied. The model contains 11 key explanatory variables with Labor Rate, Material Cost, and Logistics making up the top 3 attributes and representing 54% percent of the model weights. Findings: We propose a multi attribute decision framework for strategically assessing the attractiveness of a country as a location for manufacturing automobiles. Research limitations/implications: Consideration of country level wage variation, specific tariffs, and other economic incentives provides a secondary analysis after the initial list of candidate countries is defined. Practical implications: The results of our modeling shows China, India, and Mexico are currently the top ranked countries for manufacturing attractiveness. These three markets hold the highest utility scores throughout sensitivity analysis on the labor rate attribute weight rating, highlighting the strength and potential of manufacturing in China, India, and Mexico. Originality/value: Combining MAUT with regression analysis to simplify model to core factors then using a “must have” layer to handle extreme impacts of low weight factors and allowing for ease of repeatability.

Assessing location attractiveness for manufacturing automobiles

International Nuclear Information System (INIS)

Hanawalt, Edward; Rouse, William

2017-01-01

Evaluating country manufacturing location attractiveness on various performance measures deepens the analysis and provides a more informed basis for manufacturing site selection versus reliance on labor rates alone. A short list of countries can be used to drive regional considerations for site-specific selection within a country. Design/methodology/approach: The two-step multi attribute decision model contains an initial filter layer to require minimum values for low weighted attributes and provides a rank order utility score for twenty three countries studied. The model contains 11 key explanatory variables with Labor Rate, Material Cost, and Logistics making up the top 3 attributes and representing 54% percent of the model weights. Findings: We propose a multi attribute decision framework for strategically assessing the attractiveness of a country as a location for manufacturing automobiles. Research limitations/implications: Consideration of country level wage variation, specific tariffs, and other economic incentives provides a secondary analysis after the initial list of candidate countries is defined. Practical implications: The results of our modeling shows China, India, and Mexico are currently the top ranked countries for manufacturing attractiveness. These three markets hold the highest utility scores throughout sensitivity analysis on the labor rate attribute weight rating, highlighting the strength and potential of manufacturing in China, India, and Mexico. Originality/value: Combining MAUT with regression analysis to simplify model to core factors then using a “must have” layer to handle extreme impacts of low weight factors and allowing for ease of repeatability.

A Study of Structural Stress Technique for Fracture Prediction of an Auto-Mobile Clutch Snap-Ring

International Nuclear Information System (INIS)

Kim, Ju Hee; Myeong, Man Sik; Oh, Chang Sik; Kim, Yun Jae

2016-01-01

The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method

Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

International Nuclear Information System (INIS)

Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

2013-01-01

Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48–100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20–30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals. (letter)

Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

Science.gov (United States)

Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

2013-03-01

Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48-100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20-30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals.

12 CFR 226.12 - Special credit card provisions.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...

R&D Importance in Improving Automobile Trading Market Perspektyvūs moksliniai tyrimai, skirti tarptautiniam prekybos automobiliais verslui plėtoti

Directory of Open Access Journals (Sweden)

Aurelija Mickonytė

2011-02-01

Full Text Available

Production and sales of automobiles are significant parts of the 21st century economy. The aim of this study is to reveal the latest and most perspective scientific research directions in improving international automobile trading business by using scientific sources and official statistics. Scientific researchers are focused on strategic means that have to be taken in order to recover the market share and past sales volumes.This study reveals that even though sales volumes of automobiles in general are decreasing rapidly, sales of compact class automobiles are improving. Three main reasons for this fact are stated. First is price, second is the model of automobile and its technical characteristics, third reason is growing environmentalism. Regarding the mentioned reasons for automobile market over grouping by segments, three main scientific research directions are discussed: those that are due to price reduction, technical appearance focused and environment focused scientific researches.

Keywords: scientific research, international automobile trading, automobile production improvement.

Automobilių gamyba ir prekyba jais yra išskirtinai svarbūs elementai šiuolaikinės visuomenės ekonomikai. Šalys, kurios užsiima automobilių gamyba, gerokai padidino eksportą, kuris yra susijęs su bendro vidaus produkto ir bendro nacionalinio produkto augimu. Automobilių gamybos sektorius

Quality Special Education Programs: The Role of Transformational Leadership

Science.gov (United States)

Clinton, Demi

2013-01-01

The purpose of this quantitative study was to determine whether or not a relationship existed between principals who demonstrate transformational leadership traits and six different quality practices in their special education program. Effective principals must know and understand special education laws, practices, and current issues, but evidence…

Specialized Monte Carlo codes versus general-purpose Monte Carlo codes

International Nuclear Information System (INIS)

Moskvin, Vadim; DesRosiers, Colleen; Papiez, Lech; Lu, Xiaoyi

2002-01-01

The possibilities of Monte Carlo modeling for dose calculations and optimization treatment are quite limited in radiation oncology applications. The main reason is that the Monte Carlo technique for dose calculations is time consuming while treatment planning may require hundreds of possible cases of dose simulations to be evaluated for dose optimization. The second reason is that general-purpose codes widely used in practice, require an experienced user to customize them for calculations. This paper discusses the concept of Monte Carlo code design that can avoid the main problems that are preventing wide spread use of this simulation technique in medical physics. (authors)

A reestruturação na indústria automobilística brasileira perante o atual processo de globalização

OpenAIRE

Castro, Victor Raul Paredes

2001-01-01

O conteúdo deste trabalho tem como tema principal a análise da reestruturação do setor automobilístico brasileiro a partir das mudanças acontecidas nos sistemas fordista pela "produção enxuta".

Evaluation of Reference Centers for Special Immunobiologicals implementation

Directory of Open Access Journals (Sweden)

Laura Andrade Lagôa Nóbrega

2016-01-01

Full Text Available ABSTRACT OBJECTIVE To describe the Reference Centers for Special Immunobiologicals and evaluate their implementation considering formal regulations. METHODS We conducted a program evaluation, of evaluative research type. From August 2011 to January 2012, a questionnaire was applied to the 42 Reference Centers for Special Immunobiologicals existing in the Country, approaching the structure, human resources, and developed activities dimensions. We conducted a descriptive analysis of data and used a clustering for binary data with the squared Euclidean distance, by the farthest neighbor method, to aggregate services with similar features. RESULTS We observed great diversity among the services in the three dimensions. The clustering resulted in five service profiles, named according to their characteristics. 1 Best structure: 12 Reference Centers for Special Immunobiologicals with the highest proportion of services with the minimum of rooms recommended, purpose-built vaccine refrigerators, preventive maintenance of the cold chain, and oxygen source. 2 Immunobiologicals distributor: six Reference Centers for Special Immunobiologicals that distributed more than applied immunogens; no doctor present for more than half of the working hours and no purpose-built vaccine refrigerators . 3 Incipient implementation: five Reference Centers for Special Immunobiologicals with inadequate structure, such as absence of purpose-built vaccine refrigerators, preventive maintenance of the cold chain and oxygen source; none had computer. 4 Vaccination rooms: 13 Reference Centers for Special Immunobiologicals, everyone did routine immunization, most participated in vaccination campaigns. 5 Teaching and research: six services, all inserted into teaching hospitals, developed researches and received trainees; most had doctors in more than half of the working hours. CONCLUSIONS The evaluation of the Reference Centers for Special Immunobiologicals implementation was based on

Legal relevance of the purpose of contract in German law

Directory of Open Access Journals (Sweden)

Dudaš Atila

2013-01-01

Full Text Available Unlike the French Civil code, the German Civil code belongs to the group of so-called anti-causalistic codifications, since it explicitly does not govern the issue of purpose (cause of contract. Due to this very reason, the delineation between abstract and causal juridical acts gains special importance in German law. The German Civil Code governs a number of juridical acts and other acts of legal importance that are abstract in their nature. Among them the abstract nature of the promise to fulfill an obligation (Schuldversprechung and the acknowledgement of a debt (Schuldannerkennung is traditionally considered the most prominent. However, the relation to the purpose for which they are concluded is not entirely interrupted, since in the case of frustration of their purpose, any asset given to the other party is subject to restitution under the rules of unjustified enrichment. The fact that the issue of purpose of contract is not explicitly governed in the German Civil Code, does not lead to the conclusion, though, that it is legally irrelevant. It gains legal relevance in two different aspects: as a licit and as an illicit purpose. On the one hand, juridical acts concluded with the aim to achieve illicit purposes are considered void, for which the Code's sections on the general confines of the principle of freedom of contract serve the statutory basis - such juridical acts infringe the institution of 'good customs' (gute Sitten, usually referred to as public policy, while the performance of other factual or legal acts in order to achieve illicit purposes are sanctioned under the rules of unjustified enrichment. On the other hand, lawful purposes of the parties gain legal relevance in relation to a range of various institutions. Concerning some of them the Code itself contains formulations implying the necessity to ascertain the purpose of contract, while in other cases the case law and the doctrine have come to such conclusion. The determination

Logística e troca eletrônica de informação em empresas automobilísticas e alimentícias Logistics and electronic information interchange in automotive and food companies

Directory of Open Access Journals (Sweden)

Karine Araújo Ferreira

2005-12-01

Full Text Available Este artigo analisa impactos na logística pela troca eletrônica de informações entre empresas (com uso de EDI - Electronic Data Interchange e Internet, destacando a diferença destes impactos em empresas das indústrias alimentícia e automobilística. As empresas são pressionadas por parceiros para adoção destas tecnologias: a montadora é a responsável na cadeia automobilística e o grande varejo é o disseminador na cadeia alimentícia. O EDI pressupõe relações contratuais entre as empresas. As processadoras de alimentos observaram redução de erros e no tempo dos ciclos de pedido, assim como melhoria na visibilidade dos estoques e no planejamento de transporte para distribuição de seus produtos. Já nas empresas da indústria automobilística, os impactos são mais significativos no tempo e custo de processamento de pedido, com redução nos níveis e custo de estoque e de transporte para suprimento. Os resultados são de pesquisa de natureza qualitativa - estudos de casos.This paper analyzes the impacts of electronic information exchange (EDI - Electronic Data Interchange and Internet toward companies' logistics performance, emphasizing the difference of these impacts within food and automobile industries. Companies are being impelled by their partners to adopt these information technologies, whether: vehicle assemblers are responsible for the automobile chain; and great retailers work as disseminators through the food chain. EDI's implementation requires contractual relations among companies. Therefore, food processing industries aim to reduce both errors and cycle-time orders; as well as to improve inventory visibility and transport planning in the distribution of its products. However, in the automobile companies segment, the impacts are more significant in time and order processing costs, with the reduction of inventory and transport level's costs for supplying. The presented results are of qualitative research nature

Preliminary Assessment of Two Alternative Core Design Concepts for the Special Purpose Reactor

Energy Technology Data Exchange (ETDEWEB)

Sterbentz, James W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Werner, James E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hummel, Andrew J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kennedy, John C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); O' Brien, Robert C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Dion, Axel M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wright, Richard N. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ananth, Krishnan P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-11-01

The Special Purpose Reactor (SPR) is a small 5 MWt, heat pipe-cooled, fast reactor based on the Los Alamos National Laboratory (LANL) Mega-Power concept. The LANL concept features a stainless steel monolithic core structure with drilled channels for UO2 pellet stacks and evaporator sections of the heat pipes. Two alternative active core designs are presented here that replace the monolithic core structure with simpler and easier to manufacture fuel elements. The two new core designs are simply referred to as Design A and Design B. In addition to ease of manufacturability, the fuel elements for both Design A and Design B can be individually fabricated, assembled, inspected, tested, and qualified prior to their installation into the reactor core leading to greater reactor system reliability and safety. Design A fuel elements will require the development of a new hexagonally-shaped UO2 fuel pellet. The Design A configuration will consist of an array of hexagonally-shaped fuel elements with each fuel element having a central heat pipe. This hexagonal fuel element configuration results in four radial gaps or thermal resistances per element. Neither the fuel element development, nor the radial gap issue are deemed to be serious and should not impact an aggressive reactor deployment schedule. Design B uses embedded arrays of heat pipes and fuel pins in a double-wall tank filled with liquid metal sodium. Sodium is used to thermally bond the heat pipes to the fuel pins, but its usage may create reactor transportation and regulatory challenges. An independent panel of U.S. manufacturing experts has preliminarily assessed the three SPR core designs and views Design A as simplest to manufacture. Herein are the results of a preliminary neutronic, thermal, mechanical, material, and manufacturing assessment of both Design A and Design B along with comparisons to the LANL concept (monolithic core structure). Despite the active core differences, all three reactor concepts behave

Linguistic aspects of writing for professional purposes

Directory of Open Access Journals (Sweden)

Greta Përgjegji

2016-03-01

Full Text Available Writing for Professional Purposes is considered as a means of communication between professionals who belong to two communities that have different languages, but share the same knowledge or expertise. The article gives a hint on how writing for specific purposes evolved to give rise to the creation of Writing for Professional Purposes. The social, cultural and cognitive aspects are an essential part of Writing for Professional Purposes since the physical act of writing cannot be considered only a result or product of the knowledge the individual possesses but also a social and cultural act. Therefore, the social and cultural aspects of writing explains the specificities and the intricacies of the effects these aspects have on writing for it is considered as an inseparable part of social and cultural groups. On the other hand, the cognitive aspect of writing explains and emphasizes the mental activities of the individual during the decision-making process while he/she is writing planning and editing their material having in mind the audience. On the same line of reasoning, writing for professional purposes in a second language means that the writer has to consider the audience twice; first, there is an audience who shares the same knowledge or expertise and second, the audience does not have the same language. Consequently, writing in another language that is not the first language with a specific jargon as well as a specific grammatical structure brings about a lot of difficulties. Hence, writing in professional contexts in the mother tongue implies only writing in a specialized version of a language already known to the writer, but writing in a target language means that the writer has to learn the target language and the specialized version of that language.

Co-location synergies : specialized versus diverse logistics concentration areas

NARCIS (Netherlands)

Heuvel, van den F.P.; Langen, de P.W.; Donselaar, van K.H.; Fransoo, J.C.

2012-01-01

Purpose: The purpose of this paper is to contribute to the understanding of spatial concentration of logistics firms by empirically analyzing synergies through co-location and investigating whether co-location of logistics establishments in specialized logistics concentration areas results in

Physico-chemical and optical properties of combustion-generated particles from coal-fired power plant, automobile and ship engine and charcoal kiln.

Science.gov (United States)

Kim, Hwajin

2015-04-01

Similarities and differences in physico-chemical and optical properties of combustion generated particles from various sources were investigated. Coal-fired power plant, charcoal kiln, automobile and ship engine were major sources, representing combustions of coal, biomass and two different types of diesel, respectively. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDX) equipped with both SEM and HRTEM were used for physico-chemical analysis. Light absorbing properties were assessed using a spectrometer equipped with an integrating sphere. Particles generated from different combustion sources and conditions demonstrate great variability in their morphology, structure and composition. From coal-fired power plant, both fly ash and flue gas were mostly composed of heterogeneously mixed mineral ash spheres, suggesting that the complete combustion was occurred releasing carbonaceous species out at high temperature (1200-1300 °C). Both automobile and ship exhausts from diesel combustions show typical features of soot: concentric circles comprised of closely-packed graphene layers. However, heavy fuel oil (HFO) combusted particles from ship exhaust demonstrate more complex compositions containing different morphology of particles other than soot, e.g., spherical shape of char particles composed of minerals and carbon. Even for the soot aggregates, particles from HFO burning have different chemical compositions; carbon is dominated but Ca (29.8%), S (28.7%), Na(1%), and Mg(1%) are contained, respectively which were not found from particles of automobile emission. This indicates that chemical compositions and burning conditions are significant to determine the fate of particles. Finally, from biomass burning, amorphous and droplet-like carbonaceous particles with no crystallite structure are observed and they are generally formed by the condensation of low volatile species at low

Health of special educational teachers in the Central Slovenia

OpenAIRE

Bogataj Ivančič, Petra

2014-01-01

The purpose of the thesis was to investigate the health of special education teachers who teach in elementary special schools with lower educational standards in the Central Slovenia region. 89 special education teachers participated in the study, average age 37 years. Data were collected in 2013 through a questionnaire, which was summarized and organized according to the needs of the study from questionnaires Health-related behavioral style (CINDI Slovenia, 2008) and Stress profile questionn...

A study on an electronically controlled liquefied petroleum gas diesel dual-fuel automobile

Energy Technology Data Exchange (ETDEWEB)

Chunhua Zhang; Yaozhang Bian; Lizeng Si; Junzhi Liao; Odbileg, N. [Chang' an Univ., Automobile Faculty, Xi' an (China)

2005-02-15

In this paper, the control scheme of a liquefied petroleum gas (LPG)-diesel dual-fuel engine with electronic control is illustrated, the external characteristics and load characteristics of the LPG-diesel dual-fuel engine and the diesel engine are compared and analysed, and the results of automobile road tests are also given. The experimental results show that, compared with diesel, the output performance of dual fuel is not reduced, while smoke emission of dual fuel is significantly reduced, NO{sub x} emission of dual fuel is hardly changed, but HC emission and CO emission of dual fuel are increased and fuel consumption of dual fuel is reduced. (Author)

The Evolution of Car Sales in S.C. Next Automobile S.A. During the Crisis

OpenAIRE

Savu Mihaela; Antonescu Eugenia; Mîndreci Georgiana

2012-01-01

The automotive industry had to withstand the effects of the economic crisis, a fact underlined by the automobile production which had a volume decrease between 2008 and 2009. The same situation occurred on the car market in Romania, with the difference that the decline began in 2009 and it has continued up to now. Regarding the car sales, the Toyota brand was negatively affected by the crisis and the number of cars sold decreased between 2009 and 2010. The same situation is specific for S.C. ...

Consumer protection issues in energy: a guide for attorneys general. Insulation, solar, automobile device, home devices

Energy Technology Data Exchange (ETDEWEB)

Cohen, Harry I.; Hulse, William S.; Jones, Robert R.; Langer, Robert M.; Petrucelli, Paul J.; Schroeder, Robert J.

1979-11-01

The guide attempts to bring together two important and current issues: energy and consumer protection. Perhaps the most basic consumer-protection issue in the energy area is assuring adequate supplies at adequate prices. It is anticipated, though, that consumers will want to consider new ways to lower enegy consumption and cost, and will thus be susceptible to fraudulent energy claims. Information is prepared on insulation, solar, energy-saving devices for the home, and energy-saving devices for the automobile.

Teacher Preparation for Early Childhood: Special Education in Taiwan

Science.gov (United States)

Ho, Hua-Kuo

2014-01-01

The purpose of this paper is intended to present the current model of teacher preparation for early childhood special education in Taiwan. Documentary analysis was conducted in the study to collect and analyze the obtained data. The main features of teacher preparation policies for early childhood special education in Taiwan could be summarized…

Universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support

Directory of Open Access Journals (Sweden)

Tkachenko Sergіy A.

2013-03-01

Full Text Available The goal of the article lies in formation of a paradigm (sample of universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support. Analysing, systemising and generalising scientific works of many economists, the article describes ways of solution of the problem of organisation of works on planning and introducing the accounting function at industrial enterprises and in production associations – individual planning, increase of a number of organisations that plan functionally developed accounting subsystem and training of relevant specialists. In the result of the study the article realises an important direction of development in improvement of organisation of accounting and economic and analytical support at industrial enterprises and in production associations based on uniformity of project decisions on the subsystem of the accounting and analytical support and functional development of the process of its creation. The issue of organisation of the calculation process while planning and introducing the accounting function in functionally developed management systems of special purpose of industrial enterprises and production associations is of special urgency among the prospects of further studies in this direction. Further development of accounting can result in replacement of traditional accounting with functionally developed subsystem of accounting and analytical support with intensive use of the concept of methodologically justified paradigmatic approach.

Elementary General and Special Education Teachers' Mathematics Skills and Efficacy

Science.gov (United States)

Flores, Margaret M.; Thornton, Jennifer; Franklin, Toni M.; Hinton, Vanessa M.; Strozier, Shaunita

2014-01-01

The purpose of this study was to extend the literature regarding elementary teachers' beliefs about mathematics instruction to include special education teachers by surveying special education and general education teachers' mathematics teaching efficacy. In addition, the researchers' surveyed teachers' mathematics skills. The participants (n =…

An analytic hierarchy process for benchmarking of automobile car service industry in Indian context

Directory of Open Access Journals (Sweden)

Bhupender Singh

2015-06-01

Full Text Available This paper proposes an application of Analytical Hierarchy Process (AHP to help decision maker evaluate different processes to identify the weaknesses of an automobile car service where the best alternatives and critical success factors are identified to improve their performances against the market leader. The proposed benchmarking process may help provide effective systematic decision support tool. Thus the endeavor has been made for car service industry to exhibit proposed framework by applying AHP to enhance its competitiveness. The proposed study provides an opportunity to apply to other industries in addition with a diminutive alteration.

Special Needs: Planning for Adulthood (Videos)

Medline Plus

Full Text Available ... Answers (Q&A) Staying Safe Videos for Educators Search English Español Special Needs: Planning for Adulthood (Video) ... Nondiscrimination Visit the Nemours Web site. Note: All information on KidsHealth® is for educational purposes only. For ...

Experiences from the exercise ''MERLIN'' for the detection of radioactive substances with the participation of special-purpose vehicles; Erfahrungen aus der Uebung ''MERLIN'' zur Detektion radioaktiver Stoffe unter Beteiligung verschiedenen Einsatzfahrzeuge

Energy Technology Data Exchange (ETDEWEB)

Griesbach, M. [Hessisches Ministerium des Innern und fuer Sport, Wiesbaden (Germany)

2009-08-15

Experiences of an exercise with hazardous goods, in particular with radioactive substances (measurements and taking environmental samples) are described. Several special-purpose vehicles with equipment and specially trained crews were used together with radiation protection experts according to the concept of Hesse. It has been the greatest exercise in Hesse with regard to hazardous goods and in particular with regard to ''incidents with radioactive substances''. (orig.)

Learning Achievement Packages in Social Studies. Procedimientos para Manejar. Mantenimiento del Automovil. Llantas. (Procedures for Driving. Maintenance of an Automobile. Tires.)

Science.gov (United States)

Rendon, Rene

This publication presents three suggested social studies curriculum units designed for the bilingual Spanish-English classroom, but which would also be useful in advanced Spanish language classes for English speakers. The units, developed for grades 7-11, are entitled, "Procedures for Driving,""Maintenance of an Automobile,"…

Heart rate and core temperature responses of elite pit crews during automobile races.

Science.gov (United States)

Ferguson, David P; Bowen, Robert S; Lightfoot, J Timothy

2011-08-01

There is limited information regarding the physiological and psychological demands of the racing environment, and the subsequent effect on the performance of pit crew athletes. The purpose of this study was to evaluate heart rates (HRs) and core body temperatures (CTs) of pit crew athletes in the race environment. The HR and CT of pit crew athletes (n = 7) and control subjects were measured during 6 National Association for Stock Car Automobile Racing Sprint Cup races using ingestible sensors (HQ Inc, Palmetto, FL, USA). The HR and CT were measured before each race, at 15-minute intervals during the race, and upon completion of each pit stop. Compared to the control subject at each race, the pit crew athletes had significantly (p = 0.014) lower core temperatures (CTs). The pit crew athletes displayed higher HRs on the asphalt tracks than on concrete tracks (p = 0.011), and HR responses of the crew members were significantly (p = 0.012) different between pit crew positions, with the tire changers and jackman exhibiting higher HRs than the tire carriers. Unexpectedly, the CTs of the pit crew athletes were not elevated in the race environment, despite high ambient temperatures and the extensive fire-protection equipment (e.g., helmet, suit, gloves) each pit crew athlete wore. The lack of CT change is possibly the result of the increased HR more efficiently shunting blood to the skin and dissipating heat as a consequence of the athletes' extensive training regimen and ensuing heat acclimation. Additionally, it is possible that psychological stress unique to several of the tracks provided an additive effect resulting in increased heart rates.

CERN’s automobile fleet turns a brighter shade of green

CERN Document Server

Anaïs Vernède

2011-01-01

CERN is partnering with Services Industriels de Genève (SIG) in an environmentally friendly initiative to acquire cars running on natural gas. The first forty vehicles will arrive at CERN around mid-February, and enter service in March.   On 3 February 2011 CERN, represented by Steve Myers at the FEDRE Forum, was awarded the mobility prize. CERN currently has approximately 800 vehicles in use at its different sites. Véronique Marchal, head of Site Services in the GS Department, explains: “Our fleet includes a great variety of vehicles, from small Category A cars for staff to utility/transport vehicles. The decision to acquire cars running on natural gas is part of our strategy of diversifying CERN's automobile fleet so as to make it more environmentally friendly.” The new cars are actually bi-fuel, which means that they will have two tanks: one for regular fuel and one for compressed natural gas (CNG). “This kind of car is a little more exp...

Thermal valorisation of automobile shredder residue: injection in blast furnace.

Science.gov (United States)

Mirabile, Daphne; Pistelli, Maria Ilaria; Marchesini, Marina; Falciani, Roberta; Chiappelli, Lisa

2002-01-01

Wastes with residual heating value, according to the trend of the world legislation, could be thermally reused. The present study is conducted to verify the possibility of thermal valorisation of a waste, denominated fluff, by injection in blast furnace. The fluff, arising from the automobile shredder operations, is a waste characterised by a high organic matrix and is potentially dangerous due to the heavy metals, oils filter and halogenated plastics content. The first step of the work is the chemical, physical and toxicological characterisation of this material. Then the fluff injection in a blast furnace tuyere is theoretically analysed with a mathematical model. Finally, experimental trials are conducted in a pilot plant, simulating the most important part of the blast furnace: the raceway, in order to analyse process and industrial aspects. In view of an industrial application a first economical evaluation is carried out on the basis of model and experimental results.

Report on commissioned business for fiscal 1997. Development of new power storage system for cells and development of technology for distributed power storage (research for a zinc/air cell system for automobiles); 1997 nendo itaku gyomu hokokusho. Shingata denchi denryoku chozo system kaihatsu bunsangata denryoku chozo gijutsu kaihatsu (denki jidoshayo aen kuki denchi system chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Concerning the above, it is discussed whether such a system is feasible in Japan. A zinc/air cell system requires some special plants for zinc regeneration, etc. It is necessary to build a zinc refining plant and to install dozens of electrode replacing facilities in an area dozens of kilometers in diameter with the plant at the center. For such a system to be functional, there have to be several tens of thousands of automobile users in a limited area. In Japan, so large a number will not be found anywhere even if the appeal is directed to those in the postal service and electric utilities. There will be no economic success in Japan, different from in Germany. As for the economic comparison between a zinc/air cell system and natural gas system, the two will be equivalent to each other as far as the use of the quick filling stations for the natural gas automobiles remains as it is. When the number in consideration is so large as several tens of thousands, however, the natural gas system will turn out to be economically superior to the zinc/air cell system. 19 figs., 29 tabs.

Productivity Growth in the Automobile Industry, 1970-1980: A Comparisonof Canada, Japan and the United States

OpenAIRE

Melvyn A. Fuss; Leonard Waverman

1985-01-01

In this paper we calculate and analyze the automobile industries cost and productivity experience during the 1970 's in Canada, the U.S.and Japan. Utilizing an econometric cost function methodology, we are able to isolate the major source of short-run disequilibrium in this industry-variations' in capacity utilization-and analyze its effects on cost and total factor productivity (TFP) gross. This is achieved through a novel application of the Viner-Wng envelope theorem, which allows us to tra...

16 CFR 259.1 - Definitions.

Science.gov (United States)

2010-01-01

... economy of the particular new automobile on which the label is affixed, as determined in accordance with... for the class of new automobiles. The estimated city and highway fuel economy values of the class of... FOR NEW AUTOMOBILES § 259.1 Definitions. For the purposes of this part, the following definitions...

40 CFR 432.41 - Special definitions.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Special definitions. 432.41 Section 432.41 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... definitions. For the purpose of this subpart: High-processing packinghouse means a packinghouse which...

40 CFR 439.51 - Special definitions.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Special definitions. 439.51 Section 439.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... purpose of this subpart, product means products or services resulting from research and product...

Lead on vegetation as indicator of air pollution due to automobile exhaust's gases

Energy Technology Data Exchange (ETDEWEB)

Impens, R; Deroanne-Bauvin, J; Tilman, J

1974-01-01

Lead is regarded as an undesirable air contaminant. It's effects on health are well documented. Lead levels in air are very high in cities. Analyses have been performed on soils and urban vegetation (trees, shrubs and plants growing in city parks or near urban highways) from fifteen sites in Brussels. The collections were made from 72 to actually, at each site. The sites gave a very wide range of traffic density. A very significant correlation of lead concentration with density and characteristics of urban traffic was found. A continuous survey of lead levels on vegetation is a good indicator of air pollution caused by automobile exhaust's gases in urban and suburban areas.

Evaluation for special purposes

OpenAIRE

Viorica Toma

2011-01-01

This article aims to present the principles of international accounting standards and regulations on how Romanian accepted recognition of assets in financial reports.Company's financial reports include financial statements and other statements / reports of the directors.At the same time, it will insist on base / type of value that can be used by evaluators to harmonize concepts and especially the bases of valuation for balance sheet recognition of assets.Currently identity is observed near or...

Contribution of Road Grade to the Energy Use of Modern Automobiles Across Large Datasets of Real-World Drive Cycles: Preprint

Energy Technology Data Exchange (ETDEWEB)

Wood, E.; Burton, E.; Duran, A.; Gonder, J.

2014-01-01

Understanding the real-world power demand of modern automobiles is of critical importance to engineers using modeling and simulation to inform the intelligent design of increasingly efficient powertrains. Increased use of global positioning system (GPS) devices has made large scale data collection of vehicle speed (and associated power demand) a reality. While the availability of real-world GPS data has improved the industry's understanding of in-use vehicle power demand, relatively little attention has been paid to the incremental power requirements imposed by road grade. This analysis quantifies the incremental efficiency impacts of real-world road grade by appending high fidelity elevation profiles to GPS speed traces and performing a large simulation study. Employing a large real-world dataset from the National Renewable Energy Laboratory's Transportation Secure Data Center, vehicle powertrain simulations are performed with and without road grade under five vehicle models. Aggregate results of this study suggest that road grade could be responsible for 1% to 3% of fuel use in light-duty automobiles.

Constructivism in Teaching English for Special Purposes at Tertiary School

Directory of Open Access Journals (Sweden)

Anna Y. Polenova

2017-09-01

Full Text Available The article looks at some principles of constructivism philosophy and the ways they are realized in ESP teaching at tertiary school. The purpose of this article is to describe constructivist teaching approach in enhancing students’ use of appropriate ESP learning strategies. Constructivism is a theory that emphasizes the active role of students in building understanding and making sense of the information. The constructivist teaching is learner-centered where students are actively involved in knowledge construction rather than passive listeners. Students construct knowledge by transforming, organizing, reorganizing previous knowledge through social interaction in construction of knowledge and understanding. The paper is an attempt to examine the principles of constructivist teaching and learning by providing analysis of features of constructivist theory and the organization of a constructivist classroom.

40 CFR 432.31 - Special definitions.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Special definitions. 432.31 Section 432.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... definitions. For the purpose of this subpart: Low-processing packinghouse means a packinghouse that processes...

40 CFR 432.111 - Special definitions.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Special definitions. 432.111 Section 432.111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... definitions. For the purpose of this subpart: Poultry first processing means slaughtering of poultry and...

40 CFR 415.641 - Specialized definitions.

Science.gov (United States)

2010-07-01

... AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Cadmium Pigments and Salts Production Subcategory § 415.641 Specialized definitions. For the purpose of this subpart: (a) Except as... this chapter shall apply to this subpart. (b) The term product shall mean cadmium pigment or cadmium...

40 CFR 439.11 - Special definitions.

Science.gov (United States)

2010-07-01

... STANDARDS PHARMACEUTICAL MANUFACTURING POINT SOURCE CATEGORY Fermentation Products § 439.11 Special definitions. For the purpose of this subpart: (a) Fermentation means process operations that utilize a... occurring in unicellular plants such as yeast, molds, or fungi to produce a specified product. (b) Product...

Quantifying Parental Influence on Youth Athlete Specialization: A Survey of Athletes’ Parents

OpenAIRE

Padaki, Ajay S.; Ahmad, Christopher S.; Hodgins, Justin L.; Kovacevic, David; Lynch, Thomas Sean; Popkin, Charles A.

2017-01-01

Background: Youth athlete specialization has been linked to decreased enjoyment, burnout, and increased injury risk, although the impact of specialization on athletic success is unknown. The extent to which parents exert extrinsic influence on this phenomenon remains unclear. Purpose/Hypothesis: The goal of this study was to assess parental influences placed on young athletes to specialize. It was hypothesized that parents generate both direct and indirect pressures on specialized athletes. S...

Investigations into the effect of automobile exhausts on the phenology, periodicity and productivity of some roadside trees

Directory of Open Access Journals (Sweden)

Ghulam Bhatti

2014-01-01

Full Text Available In response to a polluted atmosphere, the phenology of Ficus benyalensis and Eucalyptus sp. was highly affected. The yield of seeds and fruits of Gunincun officinale and Azadirachta indica was lessened at the polluted sites. The automobile emissions significantly reduced the productivity in G. officinale, F. bengalensis and Eucalyptus sp., whereas, A. indica was comparatively resistant to vehicle exhaust pollution. Leaf area and dry weight were significantly reduced in most of the plants.

FY 1999 project on the development of new industry support type international standards. Standardization of a method to calculate recycling rates of automobile products; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Jidosha seihin no recycle ritsu no santei hoho no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose not only of solving the environmental problem but also of making effective use of resources and contributing to the appropriate treatment in the stage of the used resource, study was conducted of the standardization of a method to calculate recycle rates of automobile products. The FY 1999 results were summarized. In this fiscal year, to give definition of the recycle potentiality and thermal recycle, the following were proceeded with: trial evaluation of recycle potentiality, survey of the actual state of recycling of rubber/plastic parts, study of the requirements to realize the recycle potentiality, study of the requirements to realize the thermal recycle, and approaches to the international standardization. As to the trial evaluation of the recycle potentiality, tests to dismantle automobiles were made to assess the dismantlement, separation and recognition. The requirements to realize the recycle potentiality were studied. It was found out that few non-metallic materials are not recycled in the present situation. The paper studied what the requirements to realize the recycle potentiality and thermal recycle should be like basically since there is no recognition internationally unified. (NEDO)

Specialization and Commonalization in Multi-branded Manufacturing Corporations

DEFF Research Database (Denmark)

Karlsson, Christer; Sköld, Martin

2018-01-01

Purpose: The purpose of this paper is to identify areas and issues for management to consider in balancing specialization and commonalization in large manufacturing corporations with multiple brands from a strategic R&D and manufacturing point of view.Design/methodology/approach Three global...... manufacturing corporations from the automotive sector are used as a strategic sample composing three sequential clinical research projects. The data come from complementary data-gathering methods combining documents and interviews and workshops with top executives, project leaders, platform managers and product...... brand, missing the specific dynamics of large manufacturing corporations with many entities, such as individual products and brands. This paper adds knowledge regarding how to balance synergies from commonalization with important objectives to preserve the specialization and distinctiveness of each...

40 CFR 412.21 - Special definitions.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Special definitions. 412.21 Section 412.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... definitions. For the purposes of this subpart: (a) Dry lot means a facility for growing ducks in confinement...

Analysis on Anhui New Energy Automobile Marketing and Strategy%安徽省新能源汽车营销策略分析

Institute of Scientific and Technical Information of China (English)

张莉

2016-01-01

在中国的新能源汽车发展战略中，安徽积极响应并形成了以江淮、奇瑞为核心基地的新能源汽车带，安徽成为国家自主研发的重要战场，迎来了整个新能源汽车产业的革新。安徽新能源汽车的市场潜力巨大。然而也存在一些新能源汽车品牌知名度不高、推广力度不够、营销渠道不完善等问题，这将成为安徽新能源汽车销售瓶颈。文章旨在探讨如何建立牢靠的新能源汽车营销体系，改变传统的新能源汽车营销方式，用现代新型的营销策略来带动安徽省新能源汽车的长足进步。%In Chinaˊs new energy vehicle development strategy,Anhui actively responses in the formation of the core base of new energy vehicles in the JAC,Chery. Anhui became an important battleground for national inde-pendent development,which ushered in the new energy automotive industry innovation. Anhui new energy vehi-cle market has great potential. However,there are some new energy automotive brands whose awareness is not high,inadequate promotion,and marketing channels are not perfect,which will become a new energy vehicle sales in Anhui bottleneck. The purpose of this paper is to explore how to establish a reliable new energy auto-mobile marketing system,change the traditional new energy automobile promotion and marketing,with a new modern marketing strategy to promote the considerable progress of Anhui new energy vehicles.

Lift : Special Needs Transportation in Portland, Oregon

Science.gov (United States)

1978-01-01

The report covers Portland, Oregon's Special Needs Transportation (SNT) project - the Lift - during its first year of operation. The purposes of this UMTA Service and Methods Demonstration (SMD) is to: (1) test a transit operator's ability to provide...

Special Collections of Children's Literature: A Justification for Their Support.

Science.gov (United States)

Whitney, Ellen

1986-01-01

Describes the various purposes of special collections of children's literature including their value to historians, sociologists, psychologists, artists and authors, their reference purposes, and their value in preserving regional artistic and literary heritages. A bibliography of journal articles, pamphlets, and brochures listed by state is…

The IERS Special Bureau for Tides

Science.gov (United States)

Ray, Richard D.; Chao, B. F.; Desai, S. D.

2002-01-01

The Global Geophysical Fluids Center of the International Earth Rotation Service (IERS) comprises 8 special bureaus, one of which is the Special Bureau for Tides. Its purpose is to facilitate studies related to tidal effects in earth rotation. To that end it collects various relevant datasets and distributes them, primarily through its website at bowie.gsfc.nasa.gov/ggfc/tides. Example datasets include tabulations of tidal variations in angular momentum and in earth rotation as estimated from numerical ocean tide models and from meteorological reanalysis products. The web site also features an interactive tidal prediction "machine" which generates tidal predictions (e.g., of UT1) from lists of harmonic constants. The Special Bureau relies on the tidal and earth-rotation communities to build and enlarge its datasets; further contributions from this community are most welcome.

Ethanol as an Alternative Fuel for Automobiles: Using the First Law of Thermodynamics to Calculate the "Corn-Area-per-Car" Ratio

Science.gov (United States)

Pietro, William J.

2009-01-01

Students will use the first law of thermodynamics to determine the feasibility of using corn ethanol as an alternative to fossil fuels in automobiles. Energy flow is tracked from the Sun, to photosynthesized carbohydrate, to ethanol through fermentation, and finally to work in the combustion engine. Feasibility is gauged by estimating a…

Unheard Voices: Korean Immigrant Mothers' Experiences with the United States Special Education System

Science.gov (United States)

Kim, Jeanie

2013-01-01

The purpose of this study was to examine the experiences of Korean immigrant mothers of children with special needs in the New York metropolitan area in the special education process (e.g., referral, evaluation, meetings, services), and to better understand how these mothers perceive special education, disability, and their relationships with…

Purpose and objectives for international plutonium storage

International Nuclear Information System (INIS)

Kupp, R.W.

1983-01-01

Separated and decontaminated plutonium - out of a reactor, in a bottle, tank or canister represents an easy target for diversion into possible non-peaceful uses. It also presents a situation that is of concern from a terrorist attack standpoint. Because this special nuclear material has such national and international sensitivity, storage for those quantities which are ''in excess'' of those necessary to be used for peaceful purposes is of concern to the Nations of the World. Recognizing these concerns, Article XII.A.5 of the IAEA Statutes was developed (1956) and the introduction to this Sub-article 5 states ''...that with respect to any Agency Project or other arrangements where the Agency is requested by the parties concerned to apply safeguards, the Agency shall have the following rights and responsibilities to the extent relevant to the project or arrangement....'' Article XII.A.5 then continues: ''To approve the means to be used for chemical processing.... to insure that this chemical processing will not lend itself to diversion of materials for military purposes.... to require that special additional materials recovered or produced as by-product be used for peaceful purposes under continuing Agency safeguards, for research or in reactors.... and to require deposit with the Agency of any excess.... over what is needed for the above stated uses in order to prevent stockpiling of these materials, provided that thereafter, at the request of the member or members concerned.... (plutonium) shall be returned promptly.... for use under the same provisions as stated above.''

Analisis Permintaan Mobil Di Kota Medan

OpenAIRE

Siahaan, Lastri

2016-01-01

137018005 The objective of the research was to find out the influence of income, the price of automobiles, vehicle tax, the price of oil fuel, and desire to buy automobiles on the demand for automobiles in Medan. The data consisted of primary data which were obtained from field research. The samples consisted of 200 respondents for each automobile brand: Toyota, Honda, Nissan and Daihatsu in Medan, taken by using purposive sampling technique. The data were analyzed by using ...

Fostering Special Education Certification through Professional Development, Learning Communities and Mentorship

Science.gov (United States)

Trahan, Mitzi P.; Olivier, Dianne F.; Wadsworth, Donna E.

2015-01-01

The purpose of this article is to present mixed methodology evaluation data regarding a professional development initiative designed to offer non-certified special education teachers specialized classroom and teacher certification support. The project was grounded in evidence-based strategies that resulted in direct implications for teacher…

Supporting Intrinsic Motivation for Special Education Students to Meet Graduation Requirements

Science.gov (United States)

Frazier, Robert Sipplin

2015-01-01

This qualitative study examined how teachers use instructional practices and family reinforcement interventions to support intrinsic motivation for special education students as a means to meet graduation requirements. Purposeful sampling of highly qualified special education teachers certified in language arts was used in this study. The data…

Are Leaders Influenced by Advocates in Decisions on Special Education Eligibility?

Science.gov (United States)

Kirkland, Erin K. B.; Bauer, Scott C.

2016-01-01

The purpose of this study was to investigate the influence of the opinions of private practitioners and educational advocates on instructional leaders' decision-making processes when making a recommendation for special education eligibility. School-based administrators (n = 56) with varying years of experience as special education administrators…

The Odd Man Out: How Fathers Navigate the Special Education System

Science.gov (United States)

Mueller, Tracy Gershwin; Buckley, Pamela C.

2014-01-01

Research about parent experiences with the special education system is largely dominated by the perspectives of mothers. Using purposeful sampling techniques, we interviewed 20 active fathers about their experiences navigating the special education system. All the fathers described three primary roles they experienced, including acting as a…

Study of lead pollution from automobile emissions in Khartoum

International Nuclear Information System (INIS)

Ibrahim, A.S.

2002-07-01

Aerosol and soil samples were collected from places near the main roads in Khartoum area. The samples were analyzed by energy Dispersive x-ray fluorescence (EDXRF) technique, to study the lead (Pb) concentration in air and soil near roadsides due to automobile emissions. The aim of the study was also to make a comparison with the results of previous measurements made in the same field (Ahmed, 1983) . Thee aerosol samples were taken from three sites in Khartoum area. Tuti island taken as a control area, central Khartoum as a commercial area and south of Khartoum as a residential area. Soil samples were taken from a place near Al Gurashi Park and another near Abu Hamama traffic junction in Khartoum area. The data obtained of (Pb) concentrations in the roadside air were statistically analyzed. Comparisons were made between the concentrations at the various times of the day and correlation were made with meteorological parameters. The (Pb) concentrations in the roadside soil were observed to be inversely proportional to the distance from the road and the depth from the layer of the earth. Finally, the results obtained are discussed and some recommendations are suggested. (Author)

An Investigation of the Workload and Job Satisfaction of North Carolina's Special Education Directors

Science.gov (United States)

Cash, Jennifer Brown

2013-01-01

Keywords: special education directors, workload, job satisfaction, special education administration. The purpose of this mixed methods research study was to investigate employee characteristics, workload, and job satisfaction of special education directors employed by local education agencies in North Carolina (N = 115). This study illuminates the…

Improvement of technical purpose materials performance characteristics with the radio frequency low pressure plasma

Science.gov (United States)

Makhotkina, L. Yu; Khristoliubova, V. I.

2017-11-01

The main aim of the work is to solve the actual problem of increasing the competitiveness of tanning products by reducing the prime cost and improving the quality of finished products due to the increased durability of the working elements of tanneries. The impact of the low pressure radio frequency (RF) plasma in the processes of treating for modification of the materials for special purposes is considered in the article. The results of working elements of tanneries and the materials for special purposes sample processing by a RF low pressure plasma are described. As a result of leather materials nano structuring and nano modifying physical, mechanical and hygienic characteristics were increased. Processing of the technical purpose materials allows to increase operational performance of products and extend their lifespan.

Study on key technologies of vehicle networking system platform for electric automobiles based on micro-service

Science.gov (United States)

Ye, Fei

2018-04-01

With the rapid increase of electric automobiles and charging piles, the elastic expansion and online rapid upgrade were required for the vehicle networking system platform (system platform for short). At present, it is difficult to meet the operation needs due to the traditional huge rock architecture used by the system platform. This paper studied the system platform technology architecture based on "cloud platform +micro-service" to obtain a new generation of vehicle networking system platform with the combination of elastic expansion and application, thus significantly improving the service operation ability of system.

As manifestações da sustentabilidade ambiental na publicidade da indústria automobilística brasileira

OpenAIRE

Helio Pedro da Silva

2012-01-01

A presente pesquisa tem por objetivo estudar a maneira como a indústria automobilística brasileira tem abordado a sustentabilidade ambiental nos seus discursos publicitários. A iniciativa de lançar o olhar sobre tal dimensão da comunicação das marcas foi motivada, particularmente, pelos sentidos antagônicos projetados pelo bem automóvel na sociedade contemporânea. Por um lado, admirado como meio de transporte e mobilidade, e viabilizador de variadas expressões identitárias. E, por outro, crit...

Special Food and Nutrition Needs in School Nutrition Programs

Science.gov (United States)

Molaison, Elaine Fontenot; Nettles, Mary Frances

2010-01-01

Purpose/Objectives: The purpose of this research was to determine the prevalence of special food and/or nutrition needs in school nutrition programs. In addition, researchers focused on the issues surrounding these needs and the role of the school nutrition (SN) directors and managers in meeting these needs. Methods: An expert panel was used to…

THE EFFECT OF GASOLINE-LIKE FUEL PRODUCED FROM WASTE AUTOMOBILE TIRES ON EMISSIONS IN SPARK-IGNITION ENGINES

OpenAIRE

ÖZTOP, H. F.; VAROL, Y.; ALTUN, Ş.; FIRAT, M.

2016-01-01

In the present paper, the effect of Gasoline-Like Fuel (GLF) on emissions was investigated for direct injection spark-ignited engine. The GLF was obtained from waste automobile tires by using the pyrolysis. The tires are installed to oven without any procedure such as cutting, melding etc. Obtained GLF was then used in a four-cylinder, four-stroke, water-cooled and direct injection spark-ignited engine as blended with unleaded gasoline from 0% to 60% with an increment of 10%. Engine tests res...

BUSINESS PROCESSES OPTIMIZATION WITHIN UKRAINIAN AUTOMOBILE ENTERPRISES IN TERMS OF EU ENTERING PERIOD

Directory of Open Access Journals (Sweden)

Oleksandr Pidmurniak

2017-11-01

Full Text Available The purpose of the paper is to summarize and present the most common principles and management methods to seek the most efficient and profitable exit way for automobile enterprises during the period of economic recovery in Ukraine. In the course of the research, we have analysed what is SOA (Service Oriented Architecture and advantages of its implementation, the differences between BPMs and IBPMs (Intelligent Business Process Management Suite and other. Methodology. The survey is based on a comparison of different business and management approaches whereby the efficiency of business process sufficiently increases. In total, more than 30 methods are precisely analysed, around 15 most frequent management systems considered, which led us to identify 5 main recommendations. Results of the survey showed that Ukraine has very ignorant social and political environment, human capital is undeveloped and less meritocratic than our neighbours in EU have. A shortage in domestic car manufacturing, lack of new plants and technologies, as the resulting amount of workplaces remains the same or going down because of emigration, all that conduce to the growth of a number of imported cars. Trying to recognize the most recent threatens, we have detected there are no government programs, grants, laboratories, and science-plants for the young generation. Practical implications. Since Ukraine become in war, the economic and political crisis, downturn with national currency etc., domestic households faced with the huge amount of problems: inflation, collapsing currency rate, political uncertainty. All of that drives domestic business to a corner, where the growth of management efficiency and organizational transformation were the only way out. Value/originality. An Agile is a method when the company's management comes in touch with the latest business process optimization Apps like IBM, SoftwareAG, Pegasystems.

Dynamic behavior of the mechanical systems from the structure of a hybrid automobile

Science.gov (United States)

Dinel, Popa; Irina, Tudor; Nicolae-Doru, Stănescu

2017-10-01

In introduction are presented solutions of planetary mechanisms that can be used in the construction of the hybrid automobiles where the thermal and electrical sources must be coupled. The systems have in their composition a planetary mechanism with two degrees of mobility at which are coupled a thermal engine, two revertible electrical machines, a gear transmission with four gears and a differential mechanism which transmits the motion at the driving wheels. For the study of the dynamical behavior, with numerical results, one designs such mechanisms, models the elements with solids in AutoCAD, and obtains the mechanical properties of the elements. Further on, we present and solve the equations of motion of a hybrid automotive for which one knows the dynamical parameters.

33 CFR 151.06 - Special areas.

Science.gov (United States)

2010-07-01

....06 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION... Pertains to Pollution from Ships General § 151.06 Special areas. (a) For the purposes of this part, the... that portion of the Atlantic Ocean within the boundary constituted by the 30° N parallel from Florida...

Removal of oil and grease from automobile garage wastewater using electrocoagulation

Science.gov (United States)

Manilal, A. M.; Harinarayanan Nampoothiri, M. G.; Soloman, P. A.

2017-06-01

Wastewater from automobile garages and workshops is an important contributor to the water pollution. Oil and grease is one of the major content of wastewater from vehicle garages. Wastewater from a public transport depot at Thrissur district in Kerala, India was collected for the study. A batch reactor has been devised to assess the efficacy of electrocoagulation in removing oil and grease from the wastewater. Aluminium and iron were tested as the anode material with stainless steel as cathode. Experiments were conducted to investigate the effect of various operating parameters such as current density, pH, time and salt concentration on oil and grease removal. The results shown that aluminium is superior to iron in removing the oil and grease from the wastewater. The reactor with aluminium as anode was able to remove 90.8 % of the oil and grease at a current density of 0.6 A/dm2 in 15 minutes. The calculated specific energy consumption is also less for aluminium in comparison with iron.