Sample records for soviet breeder reactor-1

  1. Optimization of binary breeder reactor. 1. Sodium void reactivity and Doppler effect in a new model

    Nascimento, J.A. do; Dias, A.F.; Ishiguro, Y.


    A model for the Binary Breeder Reactor (BBR) is examined for the inherent safety characteristics, sodium void reactivity and Doppler effect in the beginning of cycle and a hypothetical end of cycle. In addition to the standard fueling mode of the BBR, two others are considered: U 238 /U 233 -alternate fueling, and U 238 /PU-normal fueling of LMFBRs. (Author) [pt

  2. International breeder reactor development

    Traube, K.


    For more than a decade, sodium cooled breeder reactors have now been in the focus of advanced nuclear power development in the major industrialized countries. In the sixties, a total of seven small experimental nuclear power stations were commissioned. Two of these have been shut down in the meantime, the others continue to work satisfactorily, their main purpose being the development of fuel elements. The years 1972-1974 saw the commissioning of the prototype power stations in the 300 MWe power category in France, the United Kingdom and the Soviet Union. Presently, other experimental reactors are under construction in the Federal Republic of Germany, Italy, Japan, the United States, plus another Soviet 600 MWe prototype reactor and the SNR 300 DeBeNeLux prototype at Kalkar. A comparison of the technological features either implemented or planned in the prototype and experimental power plants and of their fuel elements reveals a remarkable similarity in the basic concepts pursued in different countries. The two types of breeder reactors, viz. the loop and the pool types, show a closer resemblance to each other than do pressurized and boilling water reactors. The growing awareness of administrative problems emerging in the approaching phase of the introduction of large breeder power stations in a number of European countries has recently led to a streamlining effort in the structure of industries and to tentative steps towards international cooperation on a broad basis. (orig.) [de

  3. The breeder reactor and Europe

    Daglish, J.


    A report is given of a conference on the breeder reactor and Europe held in Lucerne, Switzerland from 14 - 17 October 1979 sponsored by the Swiss Association for Atomic Energy and the Association of European Atomic Forums. The underlying theme of the conference was the question that if nuclear power is to play a major role in meeting world energy needs in the long term, thermal reactors must in time be complemented with more advanced reactor systems that conserve uranium resources which are huge but not unlimited. This is not questioned; disagreement begins with discussion of the desirability of the breeder, and how fast and how far the introduction of such reactors should go. Aspects considered at the conference which are especially dealt with in this review are; why breed, commercial aspects, alternatives to the LMFBR, how to build a fast reactor, the breeder programmes in Europe, Britain, the Soviet Union, Japan and the United States. (U.K.)

  4. Fusion breeder

    Moir, R.W.


    The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the US fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the US fusion program and the US nuclear energy program. The purpose of this paper is to suggest this policy change be made and tell why it should be made, and to outline specific research and development goals so that the fusion breeder will be developed in time to meet fissile fuel needs

  5. Alternative breeder reactor technologies

    Spinrad, B.I.


    The significance of employing breeder reactors to stretch the world resources of nuclear fuels is briefly discussed, and the various types of breeder concepts are described. General descriptions, advantages, and disadvantages of the liquid metal cooled fast breeder, gas cooled fast breeder, molten salt breeder, thermal breeders, and spectral-shift control reactors are presented. Aspects of safeguarding fissile material connected with breeder operation are examined. 31 references

  6. Soviet energy


    As it moves from a centrally planned economy toward a market-based system, the Soviet Union will need to produce and export large quantities of oil to help finance industrial development and to purchase consumer goods from the West. Since 1988, however, Soviet oil production has fallen by about 8.8 percent. Oil exports also have declined, falling by about 15 percent from 1988 to 1990. The main reasons for the production decline are the lack of enough capital for exploration and production and the use of outdated and inefficient production practices. While U.S.-Soviet joint ventures could potentially help reverse this situation, both the United States and the Soviet Union maintain policies and practices that hinder U.S. trade and investment in Soviet oil exploration and production. Despite such difficulties, several U.S. multinational oil companies are proceeding with joint venture agreements, and progress is being made on overcoming some of the obstacles. For example, training programs in western business practices are being offered b the U.S. government, private companies, and universities. In addition, the U.S. and Soviet governments are now negotiating a tax treaty. GAO summarized this report in testimony before Congress

  7. A worldwide survey of fast breeder reactors

    Hennies, H.H.


    While the completion of the SNR 300 was accompanied by manifold discussions on questions relevant to safety and energy policies in the Federal Republic of Germany and as a result considerable scheduling delays and exceeding of budgets were recorded, breeder reactor technology has been progressing worldwide. The transition from the development phase with small trial reactors to the construction and operation of large performance reactors was completed systematically, in particular in France and the Soviet Union. Even though the uranium supply situation does not make a short-term and comprehensive employment of fast breeder reactors essential, technology has meanwhile been advanced to such a level and extensive operating experience is on hand to enable the construction and safe operation of fast breeder reactors. A positive answer has long been found to the question of the realization of a breeding rate to guarantee the breeding effect. There remain now the endeavors to achieve a reduction in investment and fuel cycle costs. (orig.) [de

  8. Soviet science

    Medvedev, Z.A.


    In this brief history of science in the Soviet Union the emphasis is on the interaction between scientific and technological developments and the political objectives of the Soviet government Reference is made to the development of nuclear energy for military and for peaceful purposes. In an appendix, a rather detailed account is given of a 'nuclear disaster in the South Urals area'; reference is made to ecological, genetic and population researches in the areas contaminated by long-lived products of radioactive waste (e.g. Sr-90 and Cs-137). Section headings are: lakes; mammals; population genetics and radiation genetics (covering plants, animals and soil activity). (U.K.)

  9. Fast breeder reactors

    Heinzel, V.


    The author gives a survey of 'fast breeder reactors'. In detail the process of breeding, the reasons for the development of fast breeders, the possible breeder reactors, the design criteria, fuels, cladding, coolant, and safety aspects are reported on. Design data of some experimental reactors already in operation are summarized in stabular form. 300 MWe Prototype-Reactors SNR-300 and PFR are explained in detail and data of KWU helium-cooled fast breeder reactors are given. (HR) [de

  10. Coated ceramic breeder materials

    Tam, Shiu-Wing; Johnson, Carl E.


    A breeder material for use in a breeder blanket of a nuclear reactor is disclosed. The breeder material comprises a core material of lithium containing ceramic particles which has been coated with a neutron multiplier such as Be or BeO, which coating has a higher thermal conductivity than the core material.

  11. Accelerator breeder concept

    Bartholomew, G.A.; Fraser, J.S.; Garvey, P.M.


    The principal components and functions of an accelerator breeder are described. The role of the accelerator breeder as a possible long-term fissile production support facility for CANDU (Canada Deuterium Uranium) thorium advanced fuel cycles and the Canadian research and development program leading to such a facility are outlined. (author)

  12. Fast Breeder Reactor studies

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.


    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts

  13. Fast Breeder Reactor studies

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.


    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  14. Ceramic breeder materials

    Johnson, C.E.


    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 32 refs., 1 fig., 1 tab

  15. Alternative breeder and near-breeder systems

    Critoph, E.


    Nuclear power reactor systems have been developed over the last three decades to the point where they are economically competitive, safe and reliable sources of electrical energy. However, with our present knowledge of fissile resources, there is no assurance that the commercially proven reactor systems, using their current fuel cycles, could play a major role in supplying the total world energy needs of the next, and subsequent, centuries. There is a wide consensus that such assurance requires development of reactor systems with very significantly improved fuel resource utilization. The best known of these, and the one currently receiving the lion's share of attention and effort, is the fast breeder reactor (FBR). This paper reviews the characteristics, development status and planned programmes for alternative concepts to the FBR that meet the requirement for large improvement in fuel resource utilization, i.e. alternative breeder and near-breeder systems. These include: heavy-water reactors operating on thorium fuel cycles, light-water high-conversion and breeder reactors, high-temperature gas-cooled reactors operating on thorium fuel cycles, molten salt reactors and heavy-water suspension reactors. Any attempt to make a logical choice for exploitation among these various alternatives involves a consideration of the interplay between reactor system characteristics on the one hand and a forecast of political and economic environments on the other. The reactor breeding (or conversion) ratio has received a great deal of emphasis, but an optimum choice depends also on a consideration of several other factors, including out- and in-reactor specific fuel inventories, fuel fabrication and reprocessing costs, reactor capital cost and load factor, fuel resources and demand growth rate of capacity. Possible variations in this optimum choice with time and regional location are discussed

  16. Developments in Soviet Journalism.

    Gaunt, Philip


    Studies the news values, practices, and role of journalists in the Soviet Union. Claims that, although the Soviet press currently resembles a corporate public relations department, there are signs of change because of public demands. States that journalistic practices in the U.S. and Soviet Union are similar in their reliance on routine and…

  17. Soviet scientists speak out

    Holloway, D.


    In this article, Russian bomb designers answer the KGB's claim that espionage, not science, produced the Soviet bomb. Yuli Khariton and Yuri Smirnov wholly reject the argument that Soviet scientists can claim little credit for the first Soviet bomb. In a lecture delivered at the Kurchatov Institute, established in 1943 when Igor Kurchatov became the director of the Soviet nuclear weapons project, Khariton and Smironov point to the work done by Soviet nuclear physicists before 1941 and refute assertions that have been made in Western literature regarding the hydrogen bomb

  18. The fast breeder reactor

    Patterson, W.


    The author criticises the United Kingdom Atomic Energy Authority's fast breeder reactor programme in his evidence to the House of Commons Select Committee on Energy in January 1990. He argues for power generation by renewable means and greater efficiency in the use rather than in the generation of electricity. He refutes the arguments for nuclear power on the basis of reduced global warming as he claims support technology produces significant amounts of carbon dioxide in any case. Serious doubts are raised about the costs of a fast breeder reactor programme compared to, say, generation by pressurised water reactors. The idea of a uranium scarcity in several decades is also refuted. The reliability of fast breeder reactor technology is called into question. He argues against reprocessing plutonium for economic, health and safety reasons. (UK)

  19. Breeder: now or never

    Murphy, P.M.


    The timing of the commercial introduction of the liquid metal fast breeder reactor (LMFBR) will be an important factor in its ability to supply a significant fraction of the nation's future electrical needs. The number of breeders we can build initially will be limited by the size of our low-cost uranium resources and by the rate at which light water reactors (LWRs) are placed in service. Since this uranium resource is fixed in size while electrical demand will grow geometrically, it is clear that the sooner the breeder is introduced commercially the larger will be the fraction of electrical demand it can supply. An early commercial introduction on an adequate scale requires full-scale resumption of LWR construction and redirection of LMFBR development programs toward a near-term commercial prototype

  20. The fast breeder reactor

    Keck, O.


    Nowadays the fast-breeder reactor is a negative symbol of advanced technology which is getting out of control and, due to its complexity, is incomprehensible for politicians and therefore by-passes the established order. The author lists the most important decisions over state aid to the fast-breeder-reactors up until the mid-seventies and uses documents from the appropriate advisory bodies as reference. He was also aided by interviews with those directly involved with the project. The empirical facts forces us to discard our traditional view of the relationship between state and industry with regard to advanced technology. The author explains that it is impossible to find any economic value in the fast-breeder reactor. The insight gained through this project allows him to draw conclusions which apply to all aspects of state aid to advanced technology. (orig.) [de

  1. Breeders. Les surregenerateurs


    The interest lying in the nuclear energy as a source of electric power is recalled with a view to the consumption of primary energy and electric power; the position of France is particularly discussed. The fast breeder reactor is presented and the state of development of this type of reactor in France is discussed with the planning of the Creys-Malville power plant. The problems successively examined are concerned with: fuel cycle, radioactivity and effluents, breeder safety, licensing procedures, sodium coolant, plutonium, fuel reprocessing, environmental impact and waste management.

  2. Fast breeder project (PSB)


    Activities performed during the 1st quarter of 1976 at or on behalf of the Gesellschaft fuer Kernforschung mbH, Karlsruhe, within the framework of the Fast Breeder Project are given a survey. The following project subdivisions are dealt with: Fuel rod development; materials testing and developments; corrosion studies and coolant analyses; physical experiments; reactor theory; safety of fast breeders; instrumentation and signal processing for core monitoring; effects on the environment; sodium technology tests; thermodynamic and fluid flow tests in gas. (HR) [de

  3. Competitive breeder power plants

    Winkleblack, R.K.


    To utilize the fissile material that is accumulating in the utilities' spent fuel pools, breeder plants must be less expensive than current LWR costs (or utilities will not buy nuclear plants in the near future) and also be highly reliable. The fundamental differences between LWRs and LMFBRs are discussed and recommendations are made for making the most of these differences to design a superior breeder plant that can sell in the future, opening the way to U.S. utilities becoming self-sufficient for fuel supply for centuries

  4. Project fast breeder (PSB)


    The annual report of the fast breeder project (PSB) contains contributions of the participating institutes on the four subjects: 1) Development of oxidic fuel rods and materials for the SNR line, 2) Physics and safety investigations for the SNR line, 3) Carbidic fuel elements, and 4) Back-up solution with gaseous coolant. (HK) [de

  5. Plasma focus breeder

    Ikuta, Kazunari.


    Instead of using linear accelerators, it is possible to breed fissile fuels with the help of high current plasma focus device. A mechanism of accelerating proton beam in plasma focus device to high energy would be a change of inductance in plasma column because of rapid growth of plasma instability. A possible scheme of plasma focus breeder is also proposed. (author)

  6. Fast breeder reactor research


    Full text: The meeting was attended by 15 participants from seven countries and two international organizations. The Eighth Annual Meeting of the International Working Group on Fast Reactors (IWGFR) was attended by representatives from France, Fed. Rep. Germany, Italy, Japan, United Kingdom, Union of Soviet Socialist Republics and the United States of America - countries that have made significant progress in developing the technology and physics of sodium cooled fast reactors and have extensive national programmes in this field - as well as by representatives of the Commission of the European Communities and the IAEA. The design of fast-reactor power plants is a more difficult task than developing facilities with thermal reactors. Different reactor kinetics and dynamics, a hard neutron spectrum, larger integral doses of fuel and structural material irradiation, higher core temperatures, the use of an essentially novel coolant, and, as a result of all these factors, the additional reliability and safety requirements that are imposed on the planning and operation of sodium cooled fast reactors - all these factors pose problems that can be solved comprehensively only by countries with a high level of scientific and technical development. The exchange of experience between these countries and their combined efforts in solving the fundamental problems that arise in planning, constructing and operating fast reactors are promoting technical progress and reducing the relative expenditure required for various studies on developing and introducing commercial fast reactors. For this reason, the meeting concentrated on reviewing and discussing national fast reactor programmes. The situation with regard to planning, constructing and operating fast experimental and demonstration reactors in the countries concerned, the experience accumulated in operating them, the difficulties arising during operation and ways of over-coming them, the search for optimal designs for the power

  7. The accelerator breeder

    Johansson, E.


    Interactions of high-energy particles with atomic nuclei, in particular heavy ones, leads to a strong emission of neutrons. Preferably these high-energy particles are protons or deuterons obtained from a linear accelerator. The neutrons emitted are utilized in the conversion of U238 to Pu239 or of Th232 to U233. The above is the basis of the accelerator breeder, a concept studied abroad in many variants. No such breeder has, however, so far been built, but there exists vast practical experience on the neutron production and on the linear accelerator. Some of the variants mentioned are described in the report, after a presentation of general characteristics for the particle-nucleus interaction and for the linear accelerator. (author)

  8. Breeder reactor fuel reprocessing

    Trauger, D.B.


    The time cycle for breeder reactor development and deployment is longer than the planning horizons for most private industry and governments. The potential advantage and possible desperate need for widely deployed breeder reactors in the future seems to dictate that suitable long-term development and deployment programs be established to provide an adequate base of technology and in time to meet the need. The problems of failing to do so and being confronted with a major requirement for nuclear energy could result in very serious economic and social disruption. The cost of maintaining the needed program, although substantial, is certainly modest compared with the potential problems which could ensue should we fail to proceed

  9. Molten salt breeder reactor


    MSBR Study Group formed in October 1974 has studied molten salt breeder reactor and its various aspects. Usage of a molten salt fuel, extremely interesting as reactor chemistry, is a great feature to MSBR; there is no need for separate fuel making, reprocessing, waste storage facilities. The group studied the following, and these results are presented: molten salt technology, molten salt fuel chemistry and reprocessing, reactor characteristics, economy, reactor structural materials, etc. (Mori, K.)

  10. Fast breeder reactors

    Waltar, A.E.; Reynolds, A.B.


    This book describes the major design features of fast breeder reactors and the methods used for their design and analysis. The foremost objective of this book is to fulfill the need for a textbook on Fast Breeder Reactor (FBR) technology at the graduate level or the advanced undergraduate level. It is assumed that the reader has an introductory understanding of reactor theory, heat transfer, and fluid mechanics. The book is expected to be used most widely for a one-semester general course on fast breeder reactors, with the extent of material covered to vary according to the interest of the instructor. The book could also be used effectively for a two-quarter or a two-semester course. In addition, the book could serve as a text for a course on fast reactor safety since many topics other than those appearing in the safety chapters relate to FBR safety. Methodology in fast reactor design and analysis, together with physical descriptions of systems, is emphasized in this text more than numerical results. Analytical and design results continue to change with the ongoing evolution of FBR design whereas many design methods have remained fundamentally unchanged for a considerable time

  11. Swiss breeder research programme


    A new initiative for a Swiss Fast Breeder Research Program has been started during 1991. This was partly the consequence of a vote in Fall 1990, when the Swiss public voted for maintaining nuclear reactors in operation, but also for a moratorium of 10 years, within which period no new reactor project should be proposed. On the other hand the Swiss government decided to keep the option 'atomic reactors' open and therefore it was essential to have programmes which guaranteed that the knowledge of reactor technology could be maintained in the industry and the relevant research organisations. There is also motivation to support a Swiss Breeder Research Program on the part of the utilities, the licensing authorities and the Paul Scherrer Institute (PSI). The utilities recognise the breeder reactor as an advanced reactor system which has to be developed further and might be a candidate, somewhere in the future, for electricity production. In so far they have great interest that a know-how base is maintained in our country, with easy access for technical questions and close attention to the development of this reactor type. The licensing authorities have a legitimate interest that an adequate knowledge of the breeder reactor type and its functions is kept at their disposal. PSI and the former EIR have had for many years a very successful basic research programme concerning breeder reactors, and were in close cooperation with EFR. The activities within this programme had to be terminated owing to limitations in personnel and financial resources. The new PSI research programme is based upon two main areas, reactor physics and reactor thermal hydraulics. In both areas relatively small but valuable basic research tasks, the results of which are of interest to the breeder community, will be carried out. The lack of support of the former Breeder Programme led to capacity problems and finally to a total termination. Therefore one of the problems which had to be solved first was

  12. Atlas of the Soviet Union.

    Young, Harry F.

    This atlas consists of 20 maps, tables, charts, and graphs with complementary text illustrating Soviet government machinery, trade and political relations, and military stance. Some topics depicted by charts and graphs include: (1) Soviet foreign affairs machinery; (2) Soviet intelligence and security services; (4) Soviet position in the United…

  13. Fast breeder reactors

    Ollier, J.L.


    The first industrial-scale fast breeder reactor (FBR) is the Superphenix I at Crays-Melville. It was designed and built by Novatome, a French company, and Ansaldo, an Italian company. The advantages of FBRs are summarized. The status of Superphenix and the testing schedule is given. The stages in its power escalation in 1986 are given. The article is optimistic about the future for FBRs and expects FBRs to take over from PWRs at the beginning of the 21st Century. To achieve economic viability, European financial cooperation for the research and development programme is advocated. (UK)

  14. Soviet test yields

    Vergino, Eileen S.

    Soviet seismologists have published descriptions of 96 nuclear explosions conducted from 1961 through 1972 at the Semipalatinsk test site, in Kazakhstan, central Asia [Bocharov et al., 1989]. With the exception of releasing news about some of their peaceful nuclear explosions (PNEs) the Soviets have never before published such a body of information.To estimate the seismic yield of a nuclear explosion it is necessary to obtain a calibrated magnitude-yield relationship based on events with known yields and with a consistent set of seismic magnitudes. U.S. estimation of Soviet test yields has been done through application of relationships to the Soviet sites based on the U.S. experience at the Nevada Test Site (NTS), making some correction for differences due to attenuation and near-source coupling of seismic waves.

  15. Soviet Development of Gyrotrons


    Relationship Type of Device Remarks V, - Vc, anomalous Doppler Capable of 100 percent efficiency, CRM but more cumbersome than Cheren- kov devices V...authors; and discusses inlividual Soviet reseaLc- groups, the basic organizational units responAiLle for the CRM and gyrotron research and development. The...maintained a cCnEistEnt iecord of significant achievements; it has managed to overcome the systenic yeaxness of the Soviet R&C systeg in teimg atle to

  16. Soviet Space Program Handbook.


    in advance and some events were even broadcast live. Immediately following the first success- ful launch of their new Energia space launch vehicle in...early 1988. Just as a handbook written a couple of years ago would need updating with Mir, Energia , and the SL-16, this handbook will one day need up...1986. Johnson, Nicholas L. The Soviet Year in Space 1983. Colorado Springs, CO: Teledyne Brown Engineering, 1984. Lawton, A. " Energia - Soviet Super

  17. The fast breeder reactor

    Collier, J.


    The arguments for and against the fast breeder reactor are debated. The case for the fast reactor is that the world energy demand will increase due to increasing population over the next forty years and that the damage to the global environment from burning fossil fuels which contribute to the greenhouse effect. Nuclear fission is the only large scale energy source which can achieve a cut in the use of carbon based fuels although energy conservation and renewable sources will also be important. Fast reactors produce more energy from uranium than other types of (thermal) reactors such as AGRs and PWRs. Fast reactors would be important from about 2020 onwards especially as by then many thermal reactors will need to be replaced. Fast reactors are also safer than normal reactors. The arguments against fast reactors are largely economic. The cost, especially the capital cost is very high. The viability of the technology is also questioned. (UK)

  18. The fast breeder reactor

    Davis, D.A.; Baker, M.A.W.; Hall, R.S.


    Following submission of written evidence, the Energy Committee members asked questions of three witnesses from the Central Electricity Generating Board and Nuclear Electric (which will be the government owned company running nuclear power stations after privatisation). Both questions and answers are reported verbatim. The points raised include where the responsibility for the future fast reactor programme should lie, with government only or with private enterprise or both and the viability of fast breeder reactors in the future. The case for the fast reactor was stated as essentially strategic not economic. This raised the issue of nuclear cost which has both a construction and a decommissioning element. There was considerable discussion as to the cost of building a European Fast reactor and the cost of the electricity it would generate compared with PWR type reactors. The likely demand for fast reactors will not arrive for 20-30 years and the need to build a fast reactor now is questioned. (UK)

  19. Automated breeder fuel fabrication

    Goldmann, L.H.; Frederickson, J.R.


    The objective of the Secure Automated Fabrication (SAF) Project is to develop remotely operated equipment for the processing and manufacturing of breeder reactor fuel pins. The SAF line will be installed in the Fuels and Materials Examination Facility (FMEF). The FMEF is presently under construction at the Department of Energy's (DOE) Hanford site near Richland, Washington, and is operated by the Westinghouse Hanford Company (WHC). The fabrication and support systems of the SAF line are designed for computer-controlled operation from a centralized control room. Remote and automated fuel fabriction operations will result in: reduced radiation exposure to workers; enhanced safeguards; improved product quality; near real-time accountability, and increased productivity. The present schedule calls for installation of SAF line equipment in the FMEF beginning in 1984, with qualifying runs starting in 1986 and production commencing in 1987. 5 figures

  20. Economic analysis of fusion breeders

    Delene, J.G.


    This paper presents a study of the economic performance of Fission/Fusion Hybrid devices. This work takes fusion breeder cost estimates and applies methodology and cost factors used in the fission reactor programs to compare fusion breeders with Liquid Metal Fast Breeder Reactors (LMFBR). The results of the analysis indicate that the Hybrid will be in the same competitive range as proposed LMFBRs and have the potential to provide economically competitive power in a future of rising uranium prices. The sensitivity of the results to variations in key parameters is included

  1. International strategies for breeder development

    Zaleski, C.P.; Zebroski, E.L.


    This paper studies the perspectives of breeder reactors development. The near term context has led some experts to the conclusion that breeder reactor technology is too far ahead of its time. Some have compared breeders to the supersonic airplane, Concorde: good technical performance but failure in its economic dimensions. In this paper, the author points out the major shortcomings of such an assessment which may be valid in the short time. However, with a short-term market-dominated perspective that uses an 8% discount rate, one can neglect every thing that is going to happen in 50 years. 6 refs., 11 figs

  2. Report to the Congress: liquid metal fast breeder reactor program--past, present, and future, Energy Research and Development Administration


    The past, present, and future of the liquid metal fast breeder reactor (LMFBR) program, the Nation's highest priority energy program, are studied. ERDA anticipates that the operation of the first large commercial breeder will start in 1987, and that 186 commercial-size breeders will be in operation by the year 2000. The breeder program is made up of six major areas, each dealing with an important element of technology: reactor physics; fuels and materials; fuel recycle; safety; component development; plant experience; and facilities used in the LMFBR program. ERDA is implementing a new system for administering, managing, and controlling the breeder program that will provide increased program visibility and control. Federal funding for breeder development was $168 million in FY 1971, accounting for 40% of the total Federal R and D energy budget; in FY 1976 Federal funding for this program will be $474 million, only 26% of total Federal funding for energy research. Besides Federal funds, over half a billion dollars have been or will be invested by industry over the next 5 to 10 years to develop the breeder and to build a demonstration plant. Five other nations--the United Kingdom, France, Japan, West Germany, and the Soviet Union--have a high priority national energy program for developing the LMFBR. These foreign breeder programs could contribute important data and information to the U.S. program

  3. Risk and Soviet Security Decisions

    Hull, Andrew


    .... There are several exceptions to general Soviet risk aversion in using military power. But in each instance, the Soviet Union has fared rather badly when it chanced large risks in pursuit of correspondingly high potential gains...

  4. Canadian accelerator breeder system development

    Schriber, S.O.


    A shortage of fissile material at a reasonable price is expected to occur in the early part of the twenty-first century. Converting fertile material to fissile material by electronuclar methods is an option that can extend th world's resources of fissionable material, supplying fuel for nuclear power stations. This paper presents the rationale for electronuclear breeders and describes the Canadian development program for an accelerator breeder facility that could produce 1 Mg of fissile material per year

  5. Fast breeder fuel cycle


    This contribution is prepared for the answer to the questionnaire of working group 5, subgroup B. B.1. is the short review of the fast breeder fuel cycles based on the reference large commercial Japanese LMFBR. The LMFBRs are devided into two types. FBR-A is the reactor to be used before 2000, and its burnup and breeding ratio are relatively low. The reference fuel cycle requirement is calculated based on the FBR-A. FBR-B is the one to be used after 2000, and its burnup and breeding ratio are relatively high. B.2. is basic FBR fuel reprocessing scheme emphasizing the differences with LWR reprocessing. This scheme is based on the conceptual design and research and development work on the small scale LMFBR reprocessing facility of Japan. The facility adopts a conventional PUREX process except head end portions. The report also describes the effects of technical modifications of conventional reprocessing flow sheets, and the problems to be solved before the adoption of these alternatives

  6. Tritium-assisted fusion breeders

    Greenspan, E.; Miley, G.H.


    This report undertakes a preliminary assessment of the prospects of tritium-assisted D-D fuel cycle fusion breeders. Two well documented fusion power reactor designs - the STARFIRE (D-T fuel cycle) and the WILDCAT (Cat-D fuel cycle) tokamaks - are converted into fusion breeders by replacing the fusion electric blankets with 233 U producing fission suppressed blankets; changing the Cat-D fuel cycle mode of operation by one of the several tritium-assisted D-D-based modes of operation considered; adjusting the reactor power level; and modifying the resulting plant cost to account for the design changes. Three sources of tritium are considered for assisting the D-D fuel cycle: tritium produced in the blankets from lithium or from 3 He and tritium produced in the client fission reactors. The D-D-based fusion breeders using tritium assistance are found to be the most promising economically, especially the Tritium Catalyzed Deuterium mode of operation in which the 3 He exhausted from the plasma is converted, by neutron capture in the blanket, into tritium which is in turn fed back to the plasma. The number of fission reactors of equal thermal power supported by Tritium Catalyzed Deuterium fusion breeders is about 50% higher than that of D-T fusion breeders, and the profitability is found to be slightly lower than that of the D-T fusion breeders

  7. Soviet Union, Military Affairs.


    supremacy in the world. Like the foreign policies of the USSR and the USA , their military doctrines reveal the objectives they pursue: the Soviet... Gastronom or a Detskiy Mir. In- stallation of the equipment was delayed a long time as a result. The district finance service therefore did not consider

  8. Soviet debate on missile defense

    Parrott, B.


    Although the Strategic Defense Initiative (SDI) is meant to cope with the danger of a Soviet nuclear attack, the recent US debate over SDI has paid surprisingly little attention to Soviet views of ballistic missile defense. Despite the existence of a substantial body of pertinent scholarship, the debate has failed to take adequate account of major changes in Soviet ballistic missile defense policy since the mid-1960s. It has also neglected the links between current Soviet military policy and broader Soviet political and economic choices. The Soviets regard SDI not as a novel undertaking to reduce the risks of nuclear war but as an extension of the geopolitical competition between the superpowers. This competition has been dominated in the 1980s, in the Soviet view, by sharply increased US assertiveness and the decline of detente. Viewing SDI as a manifestation of these general trends, Soviet decision makers find the prospect of an unregulated race in ballistic missile defenses and military space technologies deeply unsettling. The deterioration of superpower relations has raised serious doubts in Moscow about the wisdom of Soviet external policy during the 1970s and has provoked sharp internal differences over policy toward the US. Already highly suspicious of the Reagan administration, the elite is united by a general conviction that SDI is an American gambit that may ultimately undercut past Soviet strategic gains and pose a grave new threat to Soviet security. 14 references.

  9. Reprocessing in breeder fuel cycles

    Burch, W.D.; Groenier, W.S.


    Over the past decade, the United States has developed plans and carried out programs directed toward the demonstration of breeder fuel reprocessing in connection with the first breeder demonstration reactor. A renewed commitment to moving forward with the construction of the Clinch River Breeder Reactor (CRBR) has been made, with startup anticipated near the end of this decade. While plans for the CRBR and its associated fuel cycle are still being firmed up, the basic research and development programs required to carry out the demonstrations have continued. This paper updates the status of the reprocessing plans and programs. Policies call for breeder recycle to begin in the early to mid-1990's. Contents of this paper are: (1) evolving plans for breeder reprocessing (demonstration reprocessing plant, reprocessing head-end colocated at an existing facility); (2) relationship to LWR reprocessing; (3) integrated equipment test (IET) facility and related hardware development activities (mechanical considerations in shearing and dissolving, remote operations and maintenance demonstration phase of IET, integrated process demonstration phase of IET, separate component development activities); and (4) supporting process R and D

  10. International cooperation on breeder reactors

    Gray, J.E.; Kratzer, M.B.; Leslie, K.E.; Paige, H.W.; Shantzis, S.B.


    In March 1977, as the result of discussions which began in the fall of 1976, the Rockefeller Foundation requested International Energy Associates Limited (IEAL) to undertake a study of the role of international cooperation in the development and application of the breeder reactor. While there had been considerable international exchange in the development of breeder technology, the existence of at least seven major national breeder development programs raised a prima facie issue of the adequacy of international cooperation. The final product of the study was to be the identification of options for international cooperation which merited further consideration and which might become the subject of subsequent, more detailed analysis. During the course of the study, modifications in U.S. breeder policy led to an expansion of the analysis to embrace the pros and cons of the major breeder-related policy issues, as well as the respective views of national governments on those issues. The resulting examination of views and patterns of international collaboration emphasizes what was implicit from the outset: Options for international cooperation cannot be fashioned independently of national objectives, policies and programs. Moreover, while similarity of views can stimulate cooperation, this cannot of itself provide compelling justification for cooperative undertakings. Such undertakings are influenced by an array of other national factors, including technological development, industrial infrastructure, economic strength, existing international ties, and historic experience

  11. Breeder--now or never

    Murphy, P.M.


    The timing of the commercial introduction of the LMFBR (Liquid Metal Fast Breeder Reactor) will be an important factor in its ability to supply a significant fraction of the nation's future electrical needs. The number of breeders we can build initially will be limited by the size of our low-cost urnium resources and by the rate at which LWR's (Light Water Reactors) are placed in service. Since this uranium resource is fixed in size while electrical demand will grow geometrically, it is clear that the sooner the breeder is introduced commercially the larger will be the fraction of electrical demand that it can supply. An early commercial introduction on an adequate scale requires full-scale resumption of LWR construction and redirection of LMFBR development programs toward a near-term commercial prototype

  12. Fusion Breeder Program interim report

    Moir, R.; Lee, J.D.; Neef, W.


    This interim report for the FY82 Fusion Breeder Program covers work performed during the scoping phase of the study, December, 1981-February 1982. The goals for the FY82 study are the identification and development of a reference blanket concept using the fission suppression concept and the definition of a development plan to further the fusion breeder application. The context of the study is the tandem mirror reactor, but emphasis is placed upon blanket engineering. A tokamak driver and blanket concept will be selected and studied in more detail during FY83

  13. Soviet equipment flies in

    CERN PhotoLab


    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  14. Neutronics analysis of Nigerian Research Reactor-1

    Azande, T.S.; Balogun, G.I.


    Feasibility studies for the conversion of the Nigerian Research Reactor-1 (NIRR-1) have been performed using WIMS and CITATION codes (Azande et al, 2009 and Balogun, 2003) at the Centre for Energy Research and Training (CERT), Ahmadu Bello University, Zaria Kaduna State. In this work, the neutronics analysis of NIRR-1 core concerning mass loading of U-235 in the core, shut down margin (SDM), safety reactivity factor (SRF), control rod worth, and control rod critical depth of insertion were investigated at low enrichment. Two fuel types (UAl 4 and UO 2 ) were considered and the uranium densities required for the conversion of NIRR-1 core to low enrichment were computed to be 1201g/cc with 20% enrichment, 1144 g/cc with 19.75% enrichment, 1274 g/cc with 15% enrichment, 1448 g/cc with 10% enrichment for UAl 4 fuel type and 1141g/cc with 20% enrichment, 1144 g/cc with 19.75% enrichment, 1216 g/cc with 15% enrichment, and 1389 g/cc with 10% enrichment for UO 2 fuel type. Signi ficantly, higher uranium densities are required to convert NIRR-1 from HEU to LEU - indicating a drastic review of the NIRR-1 core.

  15. Soviet Union's Nuclear Power Program



    Glasnost has dramatically increased the availability of information about the Soviet Union's nuclear industry. In the future, even more information is likely to become known as Soviet participation in international forums increases. Not only is much more general information now available, but up-to-date details are regularly provided, including information such as the Soviet nuclear industry's strategic direction and goals, recent reactor design changes, safety inspection results, and reports of public opposition and protest. This article summarizes the current status of the Soviet nuclear power program, reconciling the often conflicting reports from various public sources

  16. Breeder reactors over the world



    After a short recall on the development of research programs, this paper reviews the fast breeder reactor operating, in construction or in project over the world (USA, France, Italy, RFG, India, Japan and U.K.). Thermal and electrical power output, and operation data are given [fr

  17. Astrid (fast breeder nuclear reactor)


    This document presents ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration), a French project of sodium-cooled fast breeder reactor, fourth generation reactor which should be fuelled by uranium 238 rather than uranium 235, and should therefore need less extracted natural uranium to produce electricity. The operation principle of fast breeder reactors is described. They notably directly consume plutonium, allow an easier radioactive waste management as they transform long life radioactive elements into shorter life elements by transmutation. The regeneration process is briefly described, and the various operation modes are evoked (iso-generator, sub-generator, and breeder). Some peculiarities of sodium-cooled reactors are outlined. The Astrid operation principle is described, its main design innovations outlined. Various challenges are discussed regarding safety of supply and waste processing, and the safety of future reactors. Major actors are indicated: CEA, Areva, EDF, SEIV Alcen, Toshiba, Rolls Royce, and Comex. Some key data are indicated: expected lifetime, expected availability rate, cost. The projected site is Marcoule and fast breeder reactors operated or under construction in the world are indicated. The document also proposes an overview of the background and evolution of reactors of 4. generation

  18. Breeder development and breeder strategies worldwide; Brueterentwicklung und Brueterstrategien weltweit

    Marth, W. [Stabsabteilung Finanzen/Controlling, Bereich Stillegung Nuklearer Anlagen, Forschungszentrum Karlsruhe GmbH (Germany)


    Fast breeders are currently operated in six countries. In addition, a breeder power plant is under construction in China. The largest plant in operation is the 1250 MWe Superphenix in France. After considerable commissioning problems, it has meanwhile attained a good availability. However, its operating license was revoked on legal grounds; one of the main reasons for that decision was the absence of a public inquiry. The operation of several fast breeders in Russia and Kazakhstan has been almost entirely devoid of problems for years. In contrast, the situation in Japan is somewhat confused at the moment, as the Japanese prototype breeder, MONJU, suffered a sodium leakage accident in 1995 and has since been down. The Indian FBTR experimental breeder is troubled by many technical problems in its commissioning phase. The American FFTR fast reactor has been kept in a hot, but non-nuclear, state for years because the politicians cannot agree on its destiny. The fate of the German SNR-300 prototype breeder is well known: For six years, no operating permit was granted to the Kalkar Nuclear Power Station. After the plant had been decommissioned in 1991 for political reasons, it was dismantled in part and has recently been converted into a fun park. (orig.) [Deutsch] In sechs Laendern werden derzeit Schnelle Brueter betrieben; in China ist darueber hinaus ein Brueterkraftwerk im Bau. Die groesste betriebene Anlage ist der 1250-MWe-Superphenix in Frankreich. Nach betraechtlichen Inbetriebsnahmeproblemen hat er inzwischen eine gute Verfuegbarkeit erreicht; aus juristischen Gruenden wurde im jedoch die Betriebsgenehmigung entzogen, wobei das Fehlen einer oeffentlichen Anhoerung die wesentliche Rolle spielt. Ziemlich problemlos ist seit Jahren der Betrieb mehrerer Schneller Brueter in Russland und Kasachstan. Demgegenueber ist die Situation in Japan derzeit etwas verworren: Der dortige Prototyp Monju erlitt 1995 einen Natriumleckagestoerfall und ist seitdem abgeschaltet. Der

  19. Soviet Military Power


    some 27,000 meters of bridging equipment, 13 1 ."¾. million metric tons of arms and ammunition, "J -- and 60 million metric tons of petrol (fuel...rhis ammuitnition. lDuring aI warn sýuppjlis fromn stratev!1( s4tuck- a1lomg with ove-(r 9 m-illion metric tons o )f petrol 10 ~iilt- In thi. Stlviit...been a target for new Soviet overtures Deputy Foreign Minister Vladimir Petrovskiy through political influence operations and ex- went to Tunisia , Iraq

  20. Soviet energy export prospects

    Scanlan, Tony


    The Soviet Union produces 20% of world energy but since 1988 this is in decline. Awakening consumerism and a sea-change in the structure of foreign trade and internal investment are placing this key industry into unprecedented uncertainty. The difference between success and failure goes beyond the 1988 peak of six million barrels daily of exports in oil equivalent. The article quantifies the key areas of energy uncertainty as equal in volume to total OPEC output and sees the long-term changes of success more than ever dependent on coordinated planning and investment as well as on market reality. (Author).

  1. Understanding Soviet Naval Developments


    submarine noise reduction technology. A single-unit experimental, deep diving SSN. SSBN in a process that converted the unit to dubbed the MIKE class, second only to that of Ja- ties. When the Soviet MIKE SSN suffered a pan in total catch tonnage each year. fire in the Norwegian Sea in April of... sharpl \\ tapered nose providing better o~er-the-nose visibil- ity: this change ’. as miade possible by the absence of’ the MIiG-23’s air intercept radar

  2. Esthetic Education in Soviet Schools.

    Soviet Education, 1980


    This issue of Soviet Education examines esthetic education in Soviet schools, including ways of raising the level of esthetic education, the factor of labor, research on the relationship between the atheistic and esthetic education, ways of amplifying interrelationship between theory and practice in teacher education and psychological principles…

  3. The Origins of Soviet Sociolinguistics.

    Brandist, Craig


    Discusses the origins of Soviet sociolinguistics and suggests that the historical significance of the reception and reinterpretation of these ideas is considerable, leading to a reconsideration of the origins of sociolinguistics and the relationship between Marxism and the language sciences in the early years of the Soviet Union. (Author/VWL)

  4. A Soviet view

    Tikhonov, S.Y.


    During the past several years, the international situation has changed greatly. Efforts to maintain strategic stability have replaced the desire for strategic superiority. Equally important, new thinking in the Soviet Union has greatly accelerated the political warming between the superpowers. As a result of thee developments, the Soviet Union and the United States have come to the conclusion that a nuclear war cannot be won and should never be fought. These events have drastically reduced the probability of the deliberate use of nuclear or conventional weapons. However, the risk of a military crisis and its consequences still exist. Indeed, the risk of a nuclear exchange is still possible. What has changed, however, is that in the current international climate, a crisis or war may result unintentionally because of misperceptions, misunderstanding, accident, or technical fault. While the probability of this is admittedly small, it remains far greater than that of deliberate conflict. The purpose of this chapter, therefore, is twofold. First, it identifies potential sources of unintended crises and conflicts and recommends appropriate confidence-building measures. Second, it addresses CBMs and their potential roles in nuclear crisis de-escalation

  5. Fast breeder fuel element development

    Marth, W.; Muehling, G.


    This report is a compilation of the papers which have been presented during a seminar ''Fast Breeder Fuel Element Development'' held on November 15/16, 1982 at KfK. The papers give a survey of the status, of the obtained results and of the necessary work, which still has to be done in the frame of various development programmes for fast breeder fuel elements. In detail the following items were covered by the presentations: - the requirements and boundary conditions for the design of fuel pins and elements both for the reference concept of the SNR 300 core and for the large, commercial breeder type of the future (presentation 1,2 and 6); - the fabrication, properties and characterization of various mixed oxide fuel types (presentations 3,4 and 5); - the operational fuel pin behaviour, limits of different design concepts and possible mechanism for fuel pin failures (presentations (7 and 8); - the situation of cladding- and wrapper materials development especially with respect to the high burn-up values of commercial reactors (presentations 9 and 10); - the results of the irradiation experiments performed under steady-state and non-stationary operational conditions and with failed fuel pins (presentations 11, 12, 13 and 14). (orig./RW) [de

  6. Soviet Marxism and population policy.

    Vonfrank, A


    American demographers have maintained that Marxism, notably Soviet Marxism, is consistently pronatalist. The Soviet view is said to be that population growth is not a problem and that birth control policies in either developed or developing societies are to be rejected; the "correct" (i.e., socialist) socioeconomic structure is the true solution to alleged population problems. Such representations of Soviet thought greatly oversimplify the Soviet position as well as fail to discern the changes in Soviet thought that have been occurring. Since the 1960s Soviet writers have increasingly acknowledged that population growth is, to a considerable degree, independent of the economic base of society and that conscious population policies may be needed to either increase or decrease the rate of population growth. Even socialist societies can have population problems. And where population growth is too rapid, as in the developing countries, policies to slow such growth are needed because of the threat to economic development. However, the Soviets continue to stress that birth control policies must go hand-in-hand with social and economic development policies if they are to be effective.

  7. Liquid metal cooled fast breeder nuclear reactors

    Gatley, J.A.


    Breeder fuel sub-assemblies with electromagnetic brakes and fluidic valves for liquid metal cooled fast breeder reactors are described. The electromagnetic brakes are of relatively small proportions and the valves are of the controlled vortex type. The outlet coolant temperature of at least some of the breeder sub-assemblies are maintained by these means substantially constant throughout the life of the fuel assembly without severely pressurising the sub-assembly. (UK)

  8. Thermal conductivity of fusion solid breeder materials

    Liu, Y.Y.; Tam, S.W.


    Several simple and useful formulae for estimating the thermal conductivity of lithium-containing ceramic tritium breeder materials for fusion reactor blankets are given. These formulae account for the effects of irradiation, as well as solid breeder configuration, i.e., monolith or a packed bed. In the latter case, a coated-sphere concept is found more attractive in incorporating beryllia (a neutron multiplier) into the blanket than a random mixture of solid breeder and beryllia spheres

  9. Status and prospects of thermal breeders


    The main objective of this cooperative study and of this report is to evaluate the extent to which thermal breeders might complement or serve as an alternative to fast breeders in solving the long-term nuclear fuel supply problem. A secondary objective is to consider in a general way issues such as proliferation, safety, environmental impacts, economics, power plant availability, and fuel cycle versatility to determine whether thermal breeder reactors offer advantages or disadvantages with respect to such issues

  10. The Soviet Union

    Lynch, A.


    William T. R. Fox's pre-nuclear age analysis provides an excellent starting point for the authors' discussion of the role of nuclear weapons in Soviet security policy. By pointing to some of the non-nuclear, more properly geopolitical sources of peace in East-West relations, Fox's forceful analysis serves as a reminder to approach the authors' study with caution. Too often, there has been a tendency to reduce the etiology of war and peace in East-West relations to its nuclear aspect without proper regard for other, primarily geopolitical, components which provide the all-important context in which nuclear weapons work their indisputable deterrent effect. Two geopolitical sources for the relative peace in post-war East-West relations have been the inability of either the Soviet Union or the United states to employ direct military force in politically significant terms against the vital interests of the other; and an abiding preference, on the part of both, for a divided Germany within a divided Europe. Any other plausible alternative, of course, would almost certainly have involved a united Germany and the related likelihood that it would either gravitate to one or the other alliance or, itself, would constitute the third leg of an intrinsically unstable tri-polar relationship. This paper reports that the prevailing inclination to analyze East-West security as a direct function of nuclear deterrence (witness the Western consternation about INF and denuclearization, and the proliferation of think-tank study groups on post-nuclear security) begs the probability that there are in fact a variety of deeply rooted structures of stability in East-West relations and so exaggerates the delicacy of the existing security order in Europe. to an extent, this follows form the general acceptance of deterrence theory in the West, especially in the United States, and the undoubtedly singular character and role of nuclear weapons in that order

  11. The Soviet Union and Soviet citizens in Finnish magazines

    Tuija Saarinen


    Full Text Available The focus of this article’s is to study Finnish popular journalism in 1970s and 1980s. A magazine studied in this article is Hymy (Smile, and it has been estimated that in the beginning of 1970s approximately the whole literary population of Finland read it. The purpose of this study is to analyze the different images Hymy created and published of the Soviet Union and the Soviet citizens. The central research question analyzes what kinds of issues Hymy published about the Soviet Union and its citizens before 1991. This study gives special attention to the reasons why the articles were written in the first place, and secondly, what was the nature of their content.        Hymy published 224 articles on the Soviet Union. The articles were mostly written in the spirit of criticism – not in the spirit of “friendship of the peoples” that was the official political stance of Finland toward the Soviet Union. Magazines had to be aware of the official Finnish political rhetoric concerning the relationship with the Soviet Union. Hymy as a popular magazine found a way to evade the official mandate. In Hymy, people were able to read anti-Soviet sentiments without any censoring. Therefore, Hymy not only provided its readers views and beliefs that expressed the popular beliefs and values, but also sympathized with them. The Cold War era in the 1970s and 1980s was still a post-traumatic period for Finns. The magazine Hymy was an important channel to publish stories on painful, embarrassing, and tragic subjects.

  12. The GBR reactor an economically competitive Breeder

    Chermanne, J.


    In this article the design is described of a 1200 MWe fast breeder, gas-cooled reactor (GBR-4), prepared by a group of experts of the Gas Breeder Reactor Association and used as a reference system for economical and safety evaluations, as well as for defining the research and development program focussed on such concept and the specifications of the prospective demonstrative plant

  13. in meat production III. Feeder - breeder dimorphism

    Feeder- breeder dimorphism is advantageous when large offspring for slaughter is obtained from small breeding animals. The effect of feeder- breeder dimorphism on herd efficiency is evaluated for terminal crossbreeding and growth modification by biotechnological or dietary means. Selection criteria for breeds or lines in ...

  14. Clinch River breeder project gets boost

    Hill, W.H.


    Progress on the Clinch River Breeder Reactor Plant project, the United States' next step in developing liquid metal fast breeder technology is examined including consideration of Plant design, component fabrication and testing, construction schedule, funding, fuel cycle development and licensing. (U.K.)

  15. U.S. and foreign breeder reactors

    Hill, E.H.


    The running battle between Congress and the Administration over the Clinch River Breeder Reactor Plant (CRBRP) Project has provoked an increased interest in domestic and foreign breeder reactor programs. Perhaps an understanding of the history of breeders here and abroad will serve to place the CRBRP in perspective and allow some analysis of how the U.S. appears on the global canvas. Breeder reactor technology has, for the most part, settled down to concentration on the liquid metal fast breeder reactor (LMFBR). This is the result of 32 years of experience with reactors employing a fast neutron flux and even longer experience with liquid metal coolants. However, a number of U.S. utilities are sponsoring a gas cooled fast reactor program as an alternative technology to the LMFBR. This development program is supported by the U.S. Department of Energy

  16. Mineral production statistics of the former Soviet Union



    Four tables show, for each of the years 1980 to 1991 Soviet oil production, Soviet gas production, Soviet coal production and Soviet steel production. Total figures are given along with a regional breakdown. 4 refs

  17. Thermal breeder fuel enrichment zoning

    Capossela, H.J.; Dwyer, J.R.; Luce, R.G.; McCoy, D.F.; Merriman, F.C.


    A method and apparatus for improving the performance of a thermal breeder reactor having regions of higher than average moderator concentration are disclosed. The fuel modules of the reactor core contain at least two different types of fuel elements, a high enrichment fuel element and a low enrichment fuel element. The two types of fuel elements are arranged in the fuel module with the low enrichment fuel elements located between the high moderator regions and the high enrichment fuel elements. Preferably, shim rods made of a fertile material are provided in selective regions for controlling the reactivity of the reactor by movement of the shim rods into and out of the reactor core. The moderation of neutrons adjacent the high enrichment fuel elements is preferably minimized as by reducing the spacing of the high enrichment fuel elements and/or using a moderator having a reduced moderating effect. 1 figure

  18. Breeder nutrition and offspring performance

    F Calini


    Full Text Available Vertical integration in poultry industry strongly emphasizes the importance of cost control at all levels. In the usual broiler production operations, the costs involved with the production of the hatching egg or the day old chick are negligible if seen in the perspective of the cost per kg of live bird. From a research point of view, anyway, the greatest attention is usually given to the performance of broiler breeders, and most of the research in the field is focused on the improvement of their relative performance, mainly in terms of saleable chicks produced per hen, while less attention has been given to the quality of the chick and to the improvement of its growth performances, even if these last parameters have an effective impact on the overall economics of the poultry growing business. Most of the data available is quite dated, as can be seen from some recent reviews, and in general little attention is given to the impact of parental nutrition on the subsequent broiler performance. It is in fact more usual to find data about dam nutrition influence on egg fertility and hatchability than on subsequent progeny performance. The objectives of this review were to assess, on the basis of published reports, the effects of selected nutrients and anti-nutrients normally prevailing in commercial broiler breeder feeds - vitamins, micro-minerals, mycotoxins, - trying to pinpoint which could be the positive and the negative effects of both on the subsequent broiler performance, with a particular attention to the impact on immune function and carcass yield.

  19. Soviet Hadron Collider

    Kotchetkov, Dmitri


    Rapid growth of the high energy physics program in the USSR during 1960s-1970s culminated with a decision to build the Accelerating and Storage Complex (UNK) to carry out fixed target and colliding beam experiments. The UNK was to have three rings. One ring was to be built with conventional magnets to accelerate protons up to the energy of 600 GeV. The other two rings were to be made from superconducting magnets, each ring was supposed to accelerate protons up to the energy of 3 TeV. The accelerating rings were to be placed in an underground tunnel with a circumference of 21 km. As a 3 x 3 TeV collider, the UNK would make proton-proton collisions with a luminosity of 4 x 1034 cm-1s-1. Institute for High Energy Physics in Protvino was a project leading institution and a site of the UNK. Accelerator and detector research and development studies were commenced in the second half of 1970s. State Committee for Utilization of Atomic Energy of the USSR approved the project in 1980, and the construction of the UNK started in 1983. Political turmoil in the Soviet Union during late 1980s and early 1990s resulted in disintegration of the USSR and subsequent collapse of the Russian economy. As a result of drastic reduction of funding for the UNK, in 1993 the project was restructured to be a 600 GeV fixed target accelerator only. While the ring tunnel and proton injection line were completed by 1995, and 70% of all magnets and associated accelerator equipment were fabricated, lack of Russian federal funding for high energy physics halted the project at the end of 1990s.

  20. Soviet nostalgia and Russian politics

    Stephen White


    Full Text Available Communist rule did not end suddenly in 1989, or in 1991. And for many, at least in Russia, there was no radical break but a complex evolution in which many of the former ruling group, and many of the values of the Soviet period, remained intact. According to the evidence of national representative surveys, levels of support for the principle of a union state have consistently been very high. In 2008 survey, more than half (57% largely or entirely agreed that the demise of the USSR had been a ‘disaster’, and nearly two-thirds (64% thought the former Soviet republics that had established a Commonwealth of Independent States should reconstitute a single state or at least cooperate more closely. Across the three Slavic republics, Russia, Ukraine and Belarus, it was guaranteed employment that was seen as the most positive feature of the old regime, and economic stagnation as its most serious shortcoming. Comparing the present and the Soviet period as they recalled it, ordinary Russians thought they had more opportunity to practise a religion, and to express their opinions. But ordinary people had (in their own view no more influence over the making of public policy than in the communist period, and they thought they were less likely to be treated fairly and equally by government. Age and living standards were the most powerful predictors of Soviet nostalgia when other variables were held constant. Nostalgics were much more likely to support parties of the left, or at least those that favoured public ownership, a Soviet or ‘more democratic Soviet’ system of government, and a closer association among the former Soviet republics; they were much less likely to support the parties that favoured the dissolution of the CIS, a wholly market economy, or Western-style democracy.

  1. Comparison of early socialization practices used for litters of small-scale registered dog breeders and nonregistered dog breeders.

    Korbelik, Juraj; Rand, Jacquie S; Morton, John M


    OBJECTIVE-To compare early socialization practices between litters of breeders registered with the Canine Control Council (CCC) and litters of nonregistered breeders advertising puppies for sale in a local newspaper. DESIGN-Retrospective cohort study. Animals-80 litters of purebred and mixed-breed dogs from registered (n = 40) and non-registered (40) breeders. PROCEDURES-Registered breeders were randomly selected from the CCC website, and nonregistered breeders were randomly selected from a weekly advertising newspaper. The litter sold most recently by each breeder was then enrolled in the study. Information pertaining to socialization practices for each litter was obtained through a questionnaire administered over the telephone. RESULTS-Registered breeders generally had more breeding bitches and had more litters than did nonregistered breeders. Litters of registered breeders were more likely to have been socialized with adult dogs, people of different appearances, and various environmental stimuli, compared with litters of nonregistered breeders. Litters from registered breeders were also much less likely to have been the result of an unplanned pregnancy. CONCLUSIONS AND CLINICAL RELEVANCE-Among those breeders represented, litters of registered breeders received more socialization experience, compared with litters of nonregistered breeders. People purchasing puppies from nonregistered breeders should focus on socializing their puppies between the time of purchase and 14 weeks of age. Additional research is required to determine whether puppies from nonregistered breeders are at increased risk of behavioral problems and are therefore more likely to be relinquished to animal shelters or euthanized, relative to puppies from registered breeders.

  2. Fast breeder reactors--lecture 4

    Marshall, W.; Davies, L.M.


    This paper discusses the economics of fast breeder reactors. An algebraic background is presented which represents the various views expressed by different nations regarding the cost of fast breeder reactors and their associated fuel cycle services, the timescale by which they might be available, and the simultaneous variations in the price of uranium. Actual presentations made by individual countries in recent discussions serve to verify the general nature of this present discussion. It is assumed that if nuclear power is to make a long term contribution to the needs of the world, the introduction of fast breeder reactors is both essential and necessary

  3. On the economics of fusion breeders

    Greenspan, E.


    The potential for improving the economics of tandem mirror fusion breeders by assisting them with tritium produced in the control of the client light water reactors and/or by operating them with polarized plasma is assessed. Also assessed is the promise of a Starfire tokamak and a compact reversed field pinch fusion driver for fusion breeder applications. All three approaches are found to promise a significant reduction in the cost of fusion breeder produced fissile fuel, potentially making the FB-LWR system economically competitive with conventional nuclear energy systems. (orig.) [de

  4. On fusion and fission breeder reactors

    Brandt, B.; Schuurman, W.; Klippel, H.Th.


    Fast breeder reactors and fusion reactors are suitable candidates for centralized, long-term energy production, their fuel reserves being practically unlimited. The technology of a durable and economical fusion reactor is still to be developed. Such a development parallel with the fast breeder is valuable by reasons of safety, proliferation, new fuel reserves, and by the very broad potential of the development of the fusion reactor. In order to facilitate a discussion of these aspects, the fusion reactor and the fast breeder reactor were compared in the IIASA-report. Aspects of both reactor systems are compared

  5. Study on tritium recovery from breeder materials

    Moriyama, H.; Moritani, K.


    For the development of fusion reactor blanket systems, some of the key issues on the tritium recovery performance of solid and liquid breeder materials were studied. In the case of solid breeder materials, a special attention was focussed on the effects of irradiation on the tritium recovery performance, and tritium release experiments, luminescence measurements of irradiation defects and modeling studies were systematically performed. For liquid breeder materials, tritium recovery experiments from molten salt and liquid lithium were performed, and the technical feasibility of tritium recovery methods was discussed. (author)

  6. Soviet Cybernetics: Recent News Items, Number Thirteen.

    Holland, Wade B.

    An issue of "Soviet Cybernetics: Recent News Items" consists of English translations of the leading recent Soviet contributions to the study of cybernetics. Articles deal with cybernetics in the 21st Century; the Soviet State Committee on Science and Technology; economic reforms in Rudnev's ministry; an interview with Rudnev; Dnepr-2; Dnepr-2…

  7. Soviet New Thinking: Perspectives and Implications


    and leading military theorist, as quoted in Steven P. Adragna , "A New Soviet Military? Doctrine and Strategy", Orbis, Spring, 1989, p. 166. 22... Adragna , pp. 166-68. 22. Soviet Battlefield Development Plan. Vol I: Soviet General Doctrine for War, p.1-8. 24. Goure, pp. 36-37. 25. William E. Odom

  8. Reasons for opposition to the breeder reactor

    Timbal-Duclaux, Louis


    The author gives a sociological analysis of the opposition to breeder reactors in France, stressing that the antinuclear groups main thrust of protest against the Super-Phenix has dimished since its apex two years ago [fr

  9. Major welfare issues in broiler breeders

    Jong, de I.C.; Guemene, D.


    Under current practices, broiler parent stock (broiler breeders) encounter several welfare problems, such as feed restriction and injury during mating. Intensive selection for production traits, especially growth rate, is associated with increased nutritious requirement and thus feed consumption,

  10. Liquid metal cooled fast breeder nuclear reactors

    Thatcher, G.; Mitchell, A.J.


    Fuel sub-assemblies for liquid metal-cooled fast breeder reactors are described which each incorporate a fluid flow control valve for regulating the rate of flow through the sub-assembly. These small electro-magnetic valves seek to maintain the outlet coolant temperature of at least some of the breeder sub-assemblies substantially constant throughout the life of the fuel assembly without severely pressurising the sub-assembly. (U.K.)

  11. Breeder reactor fuel fabrication system development

    Bennett, D.W.; Fritz, R.L.; McLemore, D.R.; Yatabe, J.M.


    Significant progress has been made in the design and development of remotely operated breeder reactor fuel fabrication and support systems (e.g., analytical chemistry). These activities are focused by the Secure Automated Fabrication (SAF) Program sponsored by the Department of Energy to provide: a reliable supply of fuel pins to support US liquid metal cooled breeder reactors and at the same time demonstrate the fabrication of mixed uranium/plutonium fuel by remotely operated and automated methods

  12. Universal Fast Breeder Reactor Subassembly Counter manual

    Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.


    A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications

  13. Universal Fast Breeder Reactor Subassembly Counter manual

    Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.


    A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

  14. JPRS Report, Soviet Union, Kommunist.


    create the most favorable conditions for a new upsurge in Soviet cinema and theater. It is only the healthy, competitive and creative atmo- sphere, in...Communist Party), Vox (Colombian Communist Party), Unidad ( Peruvian Communist Party), Hora and Popular (Uruguayan Communist Party), and Pueblo (Ecuadorian

  15. The Soviet Crisis Relocation Program.


    tie text dealing with relo ’ation is oil one page long (out of a total of 47 pags), and in tile 1981 edition it is L(1I .,4 i about a page and a...departures of foot columns will also reflect the Soviet value system. In other words, priority will be giver to elements of the essencial work force

  16. Prospects of ceramic tritium breeder materials

    Roth, E.; Roux, N.; Conservatoire National des Arts et Metiers; CEA Centre d'Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette


    In this paper the authors examine the prospects of the main ceramics proposed as breeder materials for fusion reactors, i.e. Li-2O, Li-2ZrO-3, LiAlO-2, Li-4SiO-4. To do so they review terms of reference of contemplated blankets for NET, ITER and DEMO, and the proposed blanket concepts and materials. Issues respective to the use of each breeder material are examined, and from this review it is concluded that ceramics are the most favorable breeder materials whose use can be contemplated as well for a driver blanket for NET or ITER and for a DEMO blanket. Ceramics are then compared between themselves and it is seen that, subject to the confirmation of recent experimental results, lithium zirconate could be used with advantage in any of the present blanket concepts, except in those employing lithium at its natural isotopic abundance, in which case only Li-2O can be used. However in specific cases, or in parts of a blanket, other ceramics may be profitably employed. As a general conclusion suggestions are made to further improve ceramic breeder performances, and it is recommended to intensify also work on problems that have to be solved in order to operate ceramic breeder blankets e.g. tritium extraction and recovery systems and conditions of beryllium use. (author). 37 refs.; 12 tabs

  17. The outlook for Soviet gas

    Ebel, R.E.


    The economic collapse of the Soviet Union has seen the decline of its oil and gas industry through a lack of capital investment, idle wells, shortages of equipment and spare parts, worker apathy, and a leaky pipeline network. Natural gas reserves controlled by the Soviet Union total some 50 trillion m 3 , over 70% of which are in western Siberia. A total of just 19 gas deposits hold 70% of the total reserves and account for over 75% of national output. Natural gas production in 1990 was 815 billion m 3 or 38% of world output; exports reached 109 billion m 3 , divided roughly equally between eastern and western Europe, and all transported by pipeline. The Soviet Union is also a major gas consumer, at around 709 billion m 3 /y, and uses about half this amount for generating electricity. In the early 1980s, a crash program to expand the gas industry raised production from 435 billion m 3 in 1980 to 643 billion m 3 in 1985, but at the cost of hastily built pipelines and facilities, and a premature exhaustion of major gas fields. A prohibition on import of western-made compressors, due to the Afghanistan invasion, forced the installation of unreliable domestic compressors. Slow growth in gas ouput and unreliability of the current gas supply and transmission system has threatened the stability of supply to domestic and export customers, and gas delivery shortfalls of 50-60 billion m 3 were thought possible. The industry's future depends on development of additional fields, and a revived interest in Soviet natural gas is being shown by foreign investors. Since many of these fields are in remote or geologically unfavorable areas, large investments and lead times will be needed

  18. Soviet Nuclear Strategy form Stalin to Gorbachev

    Catudal, H.M.


    This book examines the nature of the Soviet nuclear threat and how it has evolved over the years. Too often in the past U.S. officials, in shaping and directing plans for American nuclear forces, have tended to see Soviet military forces and strategy as a reflection of their own stance or simply as projecting the worst plausible case of Soviet intentions and capabilities. The result has been a distorted if not dangerous portrayal of the real threat. Soviet nuclear strategy, as explained in this detailed book, has evolved significantly since the days when the Soviets first possessed nuclear weapons under Joseph Stalin. Today there is in development a new Soviet military and strategic doctrine reflected in Gorbachev's words, We require a radical break with traditions of political thinking. This new doctrine promises to have a profound impact on European security and the overall East-West relationship

  19. JPRS Report. Soviet Union: Political Affairs.


    Soviets? The absurdity of a classified dissertation in pedagogy is intensified by the additional fact that given the truly impoverished posi- tion in...Khakass. These are our Soviet kids , the graduates of our Soviet schools. Together, they listen to the same lectures as the people their own age who...4,267. They are in training at 12 VUZs, 8 technical schools, and one professional- technical college. Four boarding schools have admitted Afghan kids

  20. Liquid metal cooled fast breeder nuclear reactors

    Duncombe, E.; Thatcher, G.


    The invention described relates to a liquid metal cooled fast breeder nuclear reactor in which the fuel assembly has an inner zone comprised mainly of fissile material and a surrounding outer zone comprised mainly of breeder material. According to the invention the sub-assemblies in the outer zone include electro-magnetic braking devices (magnets, pole pieces and armature) for regulating the flow of coolant through the sub-assemblies. The magnetic fields of the electro-magnetic breaking devices are temperature sensitive so that as the power output of the breeder sub-assemblies increases the electro-magnetic resistance to coolant flow is reduced thereby maintaining the temperature of the coolant outlets from the sub-assemblies substantially constant. (UK)

  1. European DEMO BOT solid breeder blanket

    Dalle Donne, M.


    The BOT (Breeder Outside Tube) Solid Breeder Blanket for a fusion DEMO reactor is presented. This is one of the four blanket concepts under development in the frame of the European fusion technology program with the aim to select in 1995 the two most promising ones for further development. In the paper the reference blanket design and external loops are described as well as the results of the theoretical and experimental work in the fields of neutronics, thermohydraulics, mechanical stresses, tritium control and extraction, development and irradiation of the ceramic breeder material, beryllium development, ferromagnetic forces caused by disruptions, safety and reliability. An outlook is given on the remaining open questions and on the required R and D program. (orig.) [de

  2. Scientific research in the Soviet Union

    Mtingwa, S.K.


    I report on the scientific aspects of my US/USSR Interacademy Exchange Visit to the Soviet Union. My research was conducted at three different institutes: the Lebedev Physical Institute in Moscow, the Leningrad Nuclear Physics Institute in Gatchina, and the Yerevan Physics Institute in Soviet Armenia. I included relevant information about the Soviet educational system, salaries of Soviet physicists, work habits and research activities at the three institutes, and the relevance of that research to work going on in the United States. 18 refs

  3. Soviet civil defense is inadequate and meaningless

    Kaplan, F.M.


    In this paper, the author argues that Soviet civil defense plans exist primarily on paper and are used to pacify the Soviet people, not as plans to survive and prevail in a nuclear confrontation with the U.S. The author describes how the Soviet people have little faith in the civil defense programs. They don't believe they can survive an attack. Furthermore, he says the Soviets have never staged an evacuation exercise in any major city nor, even in smaller towns, has an entire community been evacuated. The author says there are numerous problems with the shelter programs as well. Very few existing shelters have any food stocks, only a few more have any water. There is little evidence that Soviet leaders have planned their economy with civil defense in mind. Nor - given the blatant inadequacies of Soviet civil defense programs, the marked vulnerabilities of the Soviet economy, and the intrinsic limitation and uncertainties about civil defense generally - is there much basis for claiming that Soviet leaders, even in desperate straits, would risk war with the United States while counting on civil defense measures to limit the damage wreaked on the Soviet Union

  4. Fast breeder reactors an engineering introduction

    Judd, A M


    Fast Breeder Reactors: An Engineering Introduction is an introductory text to fast breeder reactors and covers topics ranging from reactor physics and design to engineering and safety considerations. Reactor fuels, coolant circuits, steam plants, and control systems are also discussed. This book is comprised of five chapters and opens with a brief summary of the history of fast reactors, with emphasis on international and the prospect of making accessible enormous reserves of energy. The next chapter deals with the physics of fast reactors and considers calculation methods, flux distribution,

  5. Coatings for fast breeder reactor components

    Johnson, R.N.


    Several types of metallurgical coatings are used in the unique environments of the fast breeder reactor. Most of the coatings have been developed for tribological applications, but some also serve as corrosion barriers, diffusion barriers, or radionuclide traps. The materials that have consistently given the best performance as tribological coatings in the breeder reactor environments have been coatings based on chromium carbide, nickel aluminide, or Tribaloy 700 (a nickel-base hard-facing alloy). Other coatings that have been qualified for limited applications include chromium plating for low temperature galling protection and nickel plating for radionuclide trapping

  6. Alternative nuclear fuel cycles and gas-cooled breeders

    Pellaud, B.; Dahlberg, R.C.


    The authors assert that it is prudent to concurrently develop more than one breeder system and to develop advanced converter reactors along with breeders. They provide arguments to support these assertions. (Auth.)

  7. Status and prospects of advanced fissile fuel breeders

    Kostoff, R.N.


    Fusion--fission hybrid systems, fast breeder systems, and accelerator breeder systems were compared on a common basis using a simple economic model. Electricity prices based on system capital costs only were computed, and were plotted as functions of five key breeder system parameters. Nominally, hybrid system electricity costs were about twenty-five percent lower than fast breeder system electricity costs, and fast breeder system electricity costs were about forty percent lower than accelerator breeder system electricity costs. In addition, hybrid system electricity costs were very insensitive to key parameter variations on the average, fast breeder system electricity costs were moderately sensitive to key parameter variations on the average, and accelerator breeder system electricity costs were the most sensitive to key parameter variations on the average

  8. A review of fusion breeder blanket technology, part 1

    Jackson, D.P.; Selander, W.N.; Townes, B.M.


    This report presents the results of a study of fusion breeder blanket technology. It reviews the role of the breeder blanket, the current understanding of the scientific and engineering bases of liquid metal and solid breeder blankets and the programs now underway internationally to resolve the uncertainities in current knowledge. In view of existing national expertise and experience, a solid breeder R and D program for Canada is recommended

  9. Advanced liquid metal fast breeder reactor designs

    Sayles, C.W.


    Fast Breeder reactor power plants in the 1000-1200 MW(e) range are being built overseas and are being designed in this country. While these reactors have many characteristics in common, a variety of different approaches have been adopted for some of the major features. Some of those alternatives are discussed

  10. Possible types of breeders with thorium cycle

    Ishiguro, Y.; Gouveia, A.S. de


    Neutronics calculations of simplified homogeneous reactor models show the possibility that metal-fueled LMFBRs and coated particle fueled gas cooled reactors achieve doubling times of around 10 years with the thorium cycle. Three concepts of gas-cooled thorium cycle breeders are discussed. (Author) [pt

  11. Possible types of breeders with thorium cycle

    Ishiguro, Y.; Gouveia, A.S. de.


    Neutronics calculations of simplified homogeneous reactor models show the possibility that metal-fueled LMFBRs and coated particle fueled gas cooled reactors achieve reactor doubling times of around 10 years with the thorium cycle. Three concepts of gas-cooled thorium cycle breeders are discused. (Author) [pt

  12. Fast breeder reactor at Kalkar. Pt. 2

    Degen, G.


    After a brief description of the previous development of the case the legal decisions are documented and commented on. The concept of the then FDP-Minister of Economy of North Rhine Westphalia (Riemer, Pu-combustion plant) is presented and the prospects and risk for the fast breeder reactor after the 3. partial construction license are discussed. (orig./HP) [de

  13. Modelling energy utilisation in broiler breeder hens.

    Rabello, C B V; Sakomura, N K; Longo, F A; Couto, H P; Pacheco, C R; Fernandes, J B K


    1. The objective of this study was to determine a metabolisable energy (ME) requirement model for broiler breeder hens. The influence of temperature on ME requirements for maintenance was determined in experiments conducted in three environmental rooms with temperatures kept constant at 13, 21 and 30 degrees C using a comparative slaughter technique. The energy requirements for weight gain were determined based upon body energy content and efficiency of energy utilisation for weight gain. The energy requirements for egg production were determined on the basis of egg energy content and efficiency of energy deposition in the eggs. 2. The following model was developed using these results: ME = kgW0.75(806.53-26.45T + 0.50T2) + 31.90G + 10.04EM, where kgW0.75 is body weight (kg) raised to the power 0.75, T is temperature ( degrees C), G is weight gain (g) and EM is egg mass (g). 3. A feeding trial was conducted using 400 Hubbard Hi-Yield broiler breeder hens and 40 Peterson males from 31 to 46 weeks of age in order to compare use of the model with a recommended feeding programme for this strain of bird. The application of the model in breeder hens provided good productive and reproductive performance and better results in feed and energy conversion than in hens fed according to strain recommendation. In conclusion, the model evaluated predicted an ME intake which matched breeder hens' requirements.

  14. Nuclear deception: soviet information policy

    Hoffmann, E.P.


    The effect of the accident at the Chernobyl Unit 4 Reactor on information policies in the USSR is examined. The lack of an agreed-upon information policy and intraparty disagreement over domestic and foreign policy help to explain the delay in disclosure of the accident and conflicting statements concerning long-term health effects. A modest change in policy since Chernobyl has been noted: the willingness of Soviet spokespersons to discuss and debate issues with foreign correspondents, to publish sharply critical letters from citizens and a few foreign officials, and to provide many details about the nature and consequences of the accident

  15. Education in the Soviet Baltic Republics.

    Soviet Education, 1981


    Includes 11 articles about education in the Soviet Baltic Republics. The articles include historical studies of Estonian and Latvian schools and medieval Estonian folk games. The impact of Marxist educational theories and Soviet policies on educational research, teacher education, and teaching methods in the Baltic region from 1920-50 is…

  16. Glasnost and Secrecy in the Soviet Military


    the most vicious and xenophobic brand of Russian chauvinism, complete with witch-hunts and spymania. Secrecy was also important for enhancing the...the Soviet Armed Forces, a significant factor tor a military establishment historically used to ’ie position of the underdog because of the Soviet

  17. The Revitalization of the Soviet Film Industry.

    Bogomolov, Yuri


    Discusses how the grip of the Soviet Union's past--from Stalinist mythology to ideological cliche--is being exposed and undermined whereas a sense of individual efficacy, necessary for the present, has yet to emerge from the portrayals in Soviet films. (PRA)

  18. The Soviet center of astronomical data

    Dluzhnevskaya, O.B.


    On the basis of the current French-Soviet cooperation in science and technology, the Astronomical Council of the U.S.S.R. Academy of Sciences and the Strasbourg Center signed in 1977 an agreement on setting up the Soviet Center of Astronomical Data as its filial branch. The Soviet Center was created on the basis of a computation center at the Zvenigorod station of the Astronomical Council of the U.S.S.R. Academy of Sciences, which had already had considerable experience of working with stellar catalogues. In 1979 the Center was equipped with a EC-1033 computer. In 1978-1979 the Soviet Center of Astronomical Data (C.A.D.) received from Strasbourg 96 of the most important catalogues. By September 1981 the list of catalogues available at the Soviet Center has reached 140 catalogues some of which are described. (Auth.)

  19. Reactivity feedback coefficients Pakistan research reactor-1 using PRIDE code

    Mansoor, Ali; Ahmed, Siraj-ul-Islam; Khan, Rustam [Pakistan Institute of Engineering and Applied Sciences, Islamabad (Pakistan). Dept. of Nuclear Engineering; Inam-ul-Haq [Comsats Institute of Information Technology, Islamabad (Pakistan). Dept. of Physics


    Results of the analyses performed for fuel, moderator and void's temperature feedback reactivity coefficients for the first high power core configuration of Pakistan Research Reactor - 1 (PARR-1) are summarized. For this purpose, a validated three dimensional model of PARR-1 core was developed and confirmed against the reference results for reactivity calculations. The ''Program for Reactor In-Core Analysis using Diffusion Equation'' (PRIDE) code was used for development of global (3-dimensional) model in conjunction with WIMSD4 for lattice cell modeling. Values for isothermal fuel, moderator and void's temperature feedback reactivity coefficients have been calculated. Additionally, flux profiles for the five energy groups were also generated.

  20. Alternative reproductive tactics in female striped mice: Solitary breeders have lower corticosterone levels than communal breeders.

    Hill, Davina L; Pillay, Neville; Schradin, Carsten


    Alternative reproductive tactics (ARTs), where members of the same sex and population show distinct reproductive phenotypes governed by decision-rules, have been well-documented in males of many species, but are less well understood in females. The relative plasticity hypothesis (RPH) predicts that switches between plastic ARTs are mediated by changes in steroid hormones. This has received much support in males, but little is known about the endocrine control of female ARTs. Here, using a free-living population of African striped mice (Rhabdomys pumilio) over five breeding seasons, we tested whether females following different tactics differed in corticosterone and testosterone levels, as reported for male striped mice using ARTs, and in progesterone and oestrogen, which are important in female reproduction. Female striped mice employ three ARTs: communal breeders give birth in a shared nest and provide alloparental care, returners leave the group temporarily to give birth, and solitary breeders leave to give birth and do not return. We expected communal breeders and returners to have higher corticosterone, owing to the social stress of group-living, and lower testosterone than solitary breeders, which must defend territories alone. Solitary breeders had lower corticosterone than returners and communal breeders, as predicted, but testosterone and progesterone did not differ between ARTs. Oestrogen levels were higher in returners (measured before leaving the group) than in communal and solitary breeders, consistent with a modulatory role. Our study demonstrates hormonal differences between females following (or about to follow) different tactics, and provides the first support for the RPH in females. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Optimized materials for the future breeder line

    Ohrt, E.; Heesen, E. te


    This paper presents a survey of developments which form part of ongoing activities for the construction of breeder plants. Following a brief introduction it describes the history of an internationally coordinated material for the major components of a European breeder. Some material properties which are of importance for the design are discussed. The task of finding a suitable filler metal for steel 316L(N) (1.4909) is considered in greater detail. In this case too, selection criteria are the mechanical properties of the weld metal, its chemical and thermal resistance and its behaviour during welding. Finally, processes which are absolutely necessary in the construction phase of a power plant are discussed in the outlook. These have not been optimized to date and will therefore be the subject of internationally distributed activities in the subsequent phase. (orig.)

  2. Progress on solid breeder TBM at SWIP

    Feng, K.M.; Pan, C.H.; Zhang, G.S.; Luo, T.Y.; Zhao, Z.; Chen, Y.J.; Ye, X.F.; Hu, G.; Wang, P.H.; Yuan, T.; Feng, Y.J.; Xiang, B.; Zhang, L.; Wang, Q.J.; Cao, Q.X.; Li, Z.X.; Wang, F.


    Current progress on the design and R and D of Chinese helium-cooled solid breeder test blanket module, CN HCSB TBM is presented. The updated design on structural, neutronics, thermal-hydraulics and safety analysis has been completed. In order to accommodate the HCSB TBM ancillary system, the design and necessary R and Ds corresponding sub-systems have being developed. Current status on the development of function materials, structure material and the helium test loop are also presented. The Chinese low-activation ferritic/martensitic steels CLF-1, which is the structural material for the HCSB TBM is being manufactured by industry. The neutron multiplier Be and tritium breeder Li 4 SiO 4 pebbles are being prepared in laboratory scale.

  3. Safeguards challenges of Fast Breeder Reactor

    Ko, H. S.


    Although the safeguards system of Sodium Fast Reactor (SFR) seems similar to that of Light Water Reactor (LWR), it was raised safeguards challenges of SFR that resulted from the visual opacity of liquid sodium, chemical reactivity of sodium and other characteristics of fast reactor. As it is the basic concept stage of the safeguards of SFR in Korea, this study tried to analyze the latest similar study of safeguards issues of the Fast Breeder Reactor (FBR) at Joyo and Monju in Japan. For this reason, this study is to introduce some potential safeguards challenges of Fast Breeder Reactor. With this analysis, future study could be to address the safeguards challenges of SFR in Korea

  4. Nuclear data needs for plutonium breeders

    Hammer, P.


    This paper aims at summarizing the present major nuclear data needs for fast breeders. The corresponding requirements are deduced from the target accuracies which are associated to the design, operation and safety related parameters. Due to the fact that these target accuracies may somewhat change from one country to another the requirements quoted here must be considered more as the present order of magnitudes than as precise figures. The maximum admissible uncertainties which are asked presently for the nuclear data are due in particular to: the necessity of reducing the supplementary investment costs which account the present neutronic uncertainties; the necessity of improving the optimization studies devoted to the future commercial fast breeders: these studies involve the comparison of neutronics performances of new concepts, such as the heterogeneous core concept, to the classical one

  5. The fast breeder reactor Rapsodie (1962)

    Vautrey, L.; Zaleski, C.P.


    In this report, the authors describe the Rapsodie project, the French fast breeder reactor, as it stands at construction actual start-up. The paper provides informations about: the principal neutronic and thermal characteristics, the reactor and its cooling circuits, the main handling devices of radioactive or contaminated assemblies, the principles and means governing reactor operation, the purposes and locations of miscellaneous buildings. Rapsodie is expected to be critical by 1964. (authors) [fr

  6. Experimental Breeder Reactor I Preservation Plan

    Julie Braun


    Experimental Breeder Reactor I (EBR I) is a National Historic Landmark located at the Idaho National Laboratory, a Department of Energy laboratory in southeastern Idaho. The facility is significant for its association and contributions to the development of nuclear reactor testing and development. This Plan includes a structural assessment of the interior and exterior of the EBR I Reactor Building from a preservation, rather than an engineering stand point and recommendations for maintenance to ensure its continued protection.

  7. Pool type liquid metal fast breeder reactors

    Guthrie, B.M.


    Various technical aspects of the liquid metal fast breeder reactor (LMFBR), specifically pool type LMFBR's, are summarized. The information presented, for the most part, draws upon existing data. Special sections are devoted to design, technical feasibility (normal operating conditions), and safety (accident conditions). A survey of world fast reactors is presented in tabular form, as are two sets of reference reactor parameters based on available data from present and conceptual LMFBR's. (auth)

  8. Former Soviet refineries face modernization, restructuring



    A massive modernization and restructuring program is under way in the refining sector of Russia and other former Soviet republics. Economic reforms and resulting economic dislocation following the collapse of the Soviet Union has left refineries in the region grappling with a steep decline and changes in product demand. At the same time, rising oil prices and an aging, dilapidated infrastructure promise a massive shakeout. Even as many refineries in the former Soviet Union (FSU) face possible closure because they are running at a fraction of capacity, a host of revamps, expansions, and grass roots refineries are planned or under way. The paper discusses plans

  9. BREEDER: a microcomputer program for financial analysis of a large-scale prototype breeder reactor

    Giese, R.F.


    This report describes a microcomputer-based, single-project financial analysis program: BREEDER. BREEDER is a user-friendly model designed to facilitate frequent and rapid analyses of the financial implications associated with alternative design and financing strategies for electric generating plants and large-scale prototype breeder (LSPB) reactors in particular. The model has proved to be a useful tool in establishing cost goals for LSPB reactors. The program is available on floppy disks for use on an IBM personal computer (or IBM look-a-like) running under PC-DOS or a Kaypro II transportable computer running under CP/M (and many other CP/M machines). The report documents version 1.5 of BREEDER and contains a user's guide. The report also includes a general overview of BREEDER, a summary of hardware requirements, a definition of all required program inputs, a description of all algorithms used in performing the construction-period and operation-period analyses, and a summary of all available reports. The appendixes contain a complete source-code listing, a cross-reference table, a sample interactive session, several sample runs, and additional documentation of the net-equity program option

  10. History and evolution of the breeder reactor

    Carle, R.


    The concept of the breeder reactor is almost as old as the idea of the nuclear reactor itself. From the very first years following the discovery of nuclear fission, scientists and technicians tried to turn mankind's eternal dream into reality; that is, enjoy an abundant source of energy without using up our raw material reserves. Nuclear energy offered several solutions to realize this dream. One of them, fusion, seemed out of our grasp in the near future. But fission of 235 U was possible, and the Manhattan Project soon furnished ample proof of this theory. However, everyone working in this field was conscious of the fact that thermal neutron reactors make very inefficient use of the energy potential contained in natural uranium. The solution was to use in a core sufficiently rich in fissile matter, the excess neutrons to convert the 238 U, so poorly used by other types of reactors, into fissile 239 Pu. Regeneration, or 'breeding' of fuel, can multiply the energy drawn from a ton of uranium by a factor of 50 to 100. This would enable us to ward off the specter of an energy shortage and the rapid depletion of uranium mines. As early as 1945 in Los Alamos, Enrico Fermi stated: 'The country which first develops a breeder reactor will have a great competitive edge in atomic energy.' The development of the breeder reactor in the USA and around the world is discussed

  11. Gas-cooled breeder reactor safety

    Chermanne, J.; Burgsmueller, P. [Societe Belge pour l' Industrie Nucleaire, Brussels


    The European Association for the Gas-cooled Breeder Reactor (G B R A), set-up in 1969 prepared between 1972 and 1974 a 1200 MWe Gas-cooled Breeder Reactor (G B R) commercial reference design G B R 4. It was then found necessary that a sound and neutral appraisal of the G B R licenseability be carried out. The Commission of the European Communities (C E C) accepted to sponsor this exercise. At the beginning of 1974, the C E C convened a group of experts to examine on a Community level, the safety documents prepared by the G B R A. A working party was set-up for that purpose. The experts examined a ''Preliminary Safety Working Document'' on which written questions and comments were presented. A ''Supplement'' containing the answers to all the questions plus a detailed fault tree and reliability analysis was then prepared. After a final study of this document and a last series of discussions with G B R A representatives, the experts concluded that on the basis of the evidence presented to the Working Party, no fundamental reasons were identified which would prevent a Gas-cooled Breeder Reactor of the kind proposed by the G B R A achieving a satisfactory safety status. Further work carried out on ultimate accident have confirmed this conclusion. One can therefore claim that the overall safety risk associated with G B R s compares favourably with that of any other reactor system.

  12. The lasting Soviet nuclear menace

    Schorr, J.


    This article describes the unsafe conditions of the nuclear power industry in the countries of the former Soviet Union. Because of lack of efficient power generation, the old first generation Chernobyl-type reactors are being upgraded or new ones are being constructed. The operators themselves are also unsafe, with lack of training and poor working conditions. Improving energy efficiency would be more cost effective than constructing new nuclear plants. This could be achieved by such measures as installing boiler controls, thermostats, and meters; by retrofitting factories; by raising the price of electricity to encourage conservation; by repairing leaking natural gas pipelines; and by building gas-fired power plants. These changes are not likely to come about soon however

  13. Children's Literature in the Soviet Union

    Miller, D. D.; And Others


    Children's literature in the Soviet Union is of four types: 17 stories based on old tales, adaptations from great Russian literature, original writings for children, and translations from foreign works. (JH)

  14. Former Soviet Union (FSU) Gravity Data

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded gravity anomaly data for the Former Soviet Union (FSU) and Eastern Europe has been received by the National Geophysical Data Center(NGDC). The data file...

  15. Frank Lloyd Wright in the Soviet Union

    Brian A. Spencer


    Full Text Available In 1937 the First All-Union Congress of Soviet Architects was held in Moscow. The congress brought  architects from all areas of the  Soviet Union. Under the auspices of Vsesoiuvnoe Obshchestvo Kul'turnoi Sviazi s zagranitsei (VOKS it invited international architects from Europe and North and South America.  The Organizing Committee of the Union of Soviet Architects invited Frank Lloyd Wright from the United States. Frank Lloyd Wright presented his philosophy and exhibited his work, specifically his designs for the weekend home for E. J. Kaufmann "Fallingwater" and the drawings for the S.C. Johnson Administration. Frank Lloyd Wright's presentation did not focus heavily on the architecture but, rather the spirit of the Russian and Soviet vision.

  16. Historical Soviet Daily Snow Depth (HSDSD)

    National Oceanic and Atmospheric Administration, Department of Commerce — The HSDSD product is based on observations from 284 World Meteorological Organization (WMO) stations throughout Russia and the former Soviet Union. The area covered...

  17. Growing Up Gifted in the Soviet Union.

    Stevens, Robert E.


    A review of the educational program for gifted students in the Soviet Union discusses student responsibilities, program admission, and specialized schools featuring foreign languages, mathematics and physics, music, ballet and arts, sports, and "little academics" (advanced studies). (CB)

  18. Thermal hydraulic and safety analyses for Pakistan Research Reactor-1

    Bokhari, I.H.; Israr, M.; Pervez, S.


    Thermal hydraulic and safety analysis of Pakistan Research Reactor-1 (PARR-1) utilizing low enriched uranium (LEU) fuel have been performed using computer code PARET. The present core comprises of 29 standard and 5 control fuel elements. Results of the thermal hydraulic analysis show that the core can be operated at a steady-state power level of 10 MW for a flow rate of 950 m 3 /h, with sufficient safety margins against ONB (onset of nucleate boiling) and DNB (departure from nucleate boiling). Safety analysis has been carried out for various modes of reactivity insertions. The events studied include: start-up accident; accidental drop of a fuel element in the core; flooding of a beam tube with water; removal of an in-pile experiment during reactor operation etc. For each of these transients, time histories of reactor power, energy released and clad surface temperature etc. were calculated. The results indicate that the peak clad temperatures remain well below the clad melting temperature during these accidents. It is therefore concluded that the reactor can be safely operated at 10 MW without compromising safety. (author)

  19. Stability analysis of the Ghana Research Reactor-1 (GHARR-1)

    Della, R.; Alhassan, E.; Adoo, N.A.; Bansah, C.Y.; Nyarko, B.J.B.; Akaho, E.H.K.


    Highlights: • We developed a theoretical model to study the stability of the Ghana Research Reactor-1. • The neutronics transfer function was described by the point kinetics model for a single group of delayed neutrons. • The thermal hydraulics transfer function was based on the modified lumped parameter concept. • A computer code, RESA (REactor Stability Analysis) was developed. • Results show that the closed-loop transfer function was stable and well damped for variable operating power levels. - Abstract: A theoretical model has been developed to study the stability of the Ghana Research Reactor one (GHARR-1). The closed-loop transfer function of GHARR-1 was established based on the model, which involved the neutronics and the thermal hydraulics transfer functions. The reactor kinetics was described by the point kinetics model for a single group of delayed neutrons, whilst the thermal hydraulics transfer function was based on the modified lumped parameter concept. The inherent internal feedback effect due to the fuel and the coolant was represented by the fuel temperature coefficient and the moderator temperature coefficient respectively. A computer code, RESA (REactor Stability Analysis), entirely in Java was developed based on the model for systems analysis. Stability analysis of the open-loop transfer function of GHARR-1 based on the Nyquist criterion and Bode diagrams using RESA, has shown that the closed-loop transfer function was marginally stable for variable operating power levels. The relative stability margins of GHARR-1 were also identified

  20. Growing Soviet market is worth the hassles

    Muse, J.F.


    Tremendous opportunity is offered by the potential market in the Soviet republics for a diverse oil and gas equipment company, such as Baker Hughes. Until recently, however, the many risks and problems limited efforts to direct, hard currency sales by three or four individual divisions (out of a total of 23) that chose to pursue markets for their products by working through independent agents. This article discusses some aspects of dealing with the Soviet market

  1. Soviet energy: current problems and future options

    Stein, J B


    The connection between Soviet oil and energy resources, their efficient and timely utilization, and politico-military opportunities in the Persian Gulf region offer an inescapable link for analysis. Worsening trends in economic growth, factor productivity, social unrest, and energy production/distribution offset optimistic trends in Soviet military procurement and deployment. A conjunction of geologic, geographic, and systemic factors all point to a mid-1980s energy imbalance which in turn will pose hard questions for the Moscow leadership. 28 references.

  2. Soviet Theater Nuclear Forces’ Issues.


    survivability) of those staffs. 18 Receit Soviet accounts of the "revolution in military affairs" stress the growing operational role of the General Staff...e.g., 29 economic) means and (ii) the West is preparing to take military advantage of its growing relative strength. The other factor is China. It seems...simple model of Soviet theater nuclear doctrine, might as well go hunting unicorns . He will not find it because, in any meaningful sense, it does not

  3. Soviet satellite communications science and technology

    Birch, J.N.; Campanella, S.J.; Gordon, G.D.; McElroy, D.R.; Pritchard, W.L.; Stamminger, R.


    This is a report by six US scientists and engineers concerning the current state of the art and projections of future Soviet satellite communications technologies. The panel members are experts in satellite stabilization, spacecraft environments, space power generation, launch systems, spacecraft communications sciences and technologies, onboard processing, ground stations, and other technologies that impact communications. The panel assessed the Soviet ability to support high-data-rate space missions at 128 Mbps by evaluating current and projected Soviet satellite communications technologies. A variety of space missions were considered, including Earth-to-Earth communications via satellites in geostationary or highly elliptical orbits, those missions that require space-to-Earth communications via a direct path and those missions that require space-to-Earth communications via a relay satellite. Soviet satellite communications capability, in most cases, is 10 years behind that of the United States and other industrialized nations. However, based upon an analysis of communications links needed to support these missions using current Soviet capabilities, it is well within the current Soviet technology to support certain space missions outlined above at rates of 128 Mbps or higher, although published literature clearly shows that the Soviet Union has not exceeded 60 Mbps in its current space system. These analyses are necessary but not sufficient to determine mission data rates, and other technologies such as onboard processing and storage could limit the mission data rate well below that which could actually be supported via the communications links. Presently, the Soviet Union appears to be content with data rates in the low-Earth-orbit relay via geostationary mode of 12 Mbps. This limit is a direct result of power amplifier limits, spacecraft antenna size, and the utilization of K{sub u}-band frequencies. 91 refs., 16 figs., 15 tabs.

  4. Soviet International Finance in the Gorbachev Era


    officials responsible for financial matters; and the financial press . All of these sources are cited as appropriate in this repoet. Considerable additional...creditors back to 1984. 2See, for example, Judy Shelton, The Coming Soviet Crash, The Free Press , New York, 1989, p. xv. 14 end of 1988, net Soviet...eighth over LIBOR. As recently as September 1989, VEB was able to arrange a five-year, $100 million syndicated credit managed by Banca Commerciale Italiana

  5. Is Soviet Defense Policy Becoming Civilianized?


    Larionov, a consultant to the institute, both at RAND and in Moscow; and Drs. Alexei Arbatov and Aleksandr Savelyev and several of their colleagues during...Soviet defense industry resources to civilian use is presented in Arthur J. Alexander , Perestroika and Change in Soviet Weapons Acquisition, The RAND...1986, especially pp. 101-102. 17 18 the more prominent younger specialists like Alexei Arbatov, Andrei Kokoshin, and Aleksandr Savelyev have long been

  6. The Grand Strategy of the Soviet Union


    of diverse echnic the highest origin could rise to AleveLs of power in all branches of the state. Plainly that is not the case in today’s Soviet...and psychological reasons, the new primacy given to external aggrandizement intensifies ethnic tensions inside Soviet society. The failure to fulfill...or perhaps because our own means are simply too small, we come to terms psychologically with its increasing power by persuading ourselves that it

  7. A manufacturer's view of the US breeder program

    Arnold, W.H.


    A liquid metal fast breeder reactor (LMFBR) was selected for development in a program to develop breeder reactors in general. The LMFBR is a sodium-cooled fast reactor which operates at a high conversion ratio of fertile-to-fissile material while generating electricity at a high thermal efficiency. The breeder has the added capacity to operate on the plutonium in Light Water Reactor spent fuel, and on U-238. A governmental/industrial infrastructure must be developed. Criteria for breeder deployment are listed. Construction of the Clinch River Breeder reactor is a necessary step in the progression to a mature breeder. Then the large prototype LMFBR should be built. Foreign collaboration is considered. Finally, a capital cost analysis indicates LMFBR cost-effectiveness

  8. Perestroika, Soviet oil, and joint ventures

    Churkin, M. Jr.


    Glaznost, the freedom of expression in both the public and private sectors of the Soviet Union, has rapidly transformed the country form a largely isolated and closed society to one that is rapidly becoming more cosmopolitan and open to the West. Now that the Soviet Union is moving toward a free-market economy, a number of new laws are being generated to create a favorable environment for Western investment, especially joint ventures. First, crude oil sales have provided over 75% of much-needed hard currency, and oil has been the principal barter for manufactured goods produced in eastern Europe. Second, joint oil ventures with Western companies can reverse declining production levels and provide sufficient stimulus to turn around the economic recession. The Soviet Union has a very large inventory of discovered but undeveloped oil and gas fields. Most of these fields are difficult for the Soviets to produce technically, financially, and environmentally safely, and they are actively seeking appropriate Western partners. From an exploration point of view, the Soviet Union has probably the largest number of undrilled and highly prospective oil basins, which may replenish declining reserves in the West. Finally, the Soviet Union represents in the long term a large unsaturated market eager to absorb the surplus of goods and services in the Western world. Again, joint oil ventures could provide the convertible currency to increase East-West trade

  9. Processing and waste disposal representative for fusion breeder blanket systems

    Finn, P.A.; Vogler, S.


    This study is an evaluation of the waste handling concepts applicable to fusion breeder systems. Its goal is to determine if breeder blanket waste can be disposed of in shallow land burial, the least restrictive method under US Nuclear Regulatory regulations. The radionuclides expected in the materials used in fusion reactor blankets are described, as are plans for reprocessing and disposal of the components of different breeder blankets. An estimate of the operating costs involved in waste disposal is made

  10. On Ideology, Language, and Identity: Language Politics in the Soviet and Post-Soviet Lithuania

    Balockaite, Rasa


    The paper illuminates links between state politics and language politics in Lithuania during different historical periods: (a) the thaw period, (b) the stagnation period, (c) the liberalization periods of Soviet socialism, and (d) the two post-Soviet decades characterized by both nationalism and liberalization. Based on analysis of the texts by…

  11. Design activities of a fusion experimental breeder

    Huang, J.; Feng, K.; Sheng, G.


    The fusion reactor design studies in China are under the support of a fusion-fission hybrid reactor research Program. The purpose of this program is to explore the potential near-term application of fusion energy to support the long-term fusion energy on the one hand and the fission energy development on the other. During 1992-1996 a detailed consistent and integral conceptual design of a Fusion Experimental Breeder, FEB was completed. Beginning from 1996, a further design study towards an Engineering Outline Design of the FEB, FEB-E, has started. The design activities are briefly given. (author)

  12. Burnup characteristics of binary breeder reactors

    Dias, A.F.; Nascimento, J.A. do; Ishiguro, Y.


    Burnup calculations of a binary breeder reactor have been done for two cases of fueling. In one case the U 233 /TH fueled inner core and the Pu/U-fueled outer core have the same number of fuel assemblies. In the other case two outermost rings in the inner core are Pu/U-fueled. The second case is considered for an initial phase of thorim cycle introduction when the supply of U 233 could be limited. Results show an efficient breeding on the thorium cycle in both cases. (Author) [pt

  13. Automated manufacturing of breeder reactor fuels

    Nyman, D.H.; Benson, E.M.; Bennett, D.W.


    The Secure Automated Fabrication (SAF) line is an automated, remotely controlled breeder fuel pin fabrication process which is to be installed in the Fuels and Materials Examination Facility (FMEF). The FMEF is presently under construction at Hanford and is scheduled for completion in 1984. The SAF line is scheduled for startup in 1987 and will produce mixed uranium-plutonium oxide fuel pins for the Fast Flux Test Facility (FFTF). Radiological protection requirements, computer control equipment, use of robotics, and the fabrication process is described

  14. Liquid metal cooled fast breeder nuclear reactor

    Scott, D.


    A liquid metal cooled fast breeder nuclear reactor has a core comprising a plurality of fuel assemblies supported on a diagrid and submerged in a pool of liquid metal coolant within a containment vessel, the diagrid being of triple component construction and formed of a short cylindrical plenum mounted on a conical undershell and loosely embraced by a fuel store carrier. The plenum merely distributes coolant through the fuel assemblies, the load of the assemblies being carried by the undershell by means of struts which penetrate the plenum. The reactor core, fuel store carrier and undershell provide secondary containment for the plenum. (UK)

  15. Gas-cooled fast breeder reactor

    Yoshida, Hiroyuki


    Almost all the R D works of gas-cooled fast breeder reactor in the world were terminated at the end of the year 1980. In order to show that the R D termination was not due to technical difficulties of the reactor itself, the present paper describes the reactor plant concept, reactor performances, safety, economics and fuel cycle characteristics of the reactor, and also describes the reactor technologies developed so far, technological problems remained to be solved and planned development schedules of the reactor. (author)

  16. Advanced breeder cycle uses metallic fuel

    Chang, Y.I.


    Scientists from Argonne National Laboratory have been developing a concept called the Integral fast Reactor (IFR). This fast breeder reactor could effectively increase Uranium resources a hundred fold making nuclear power essentially an inexhaustible energy source. The IFR is outlined. In the IFR, the inherent properties of liquid metal cooling are combined with a new metallic fuel which is allowed to swell and gives an improved burnup level and a radically different refining process to allow breakthroughs in passive safety, fuel cycle economics and waste management. (author)

  17. Utilizing FFTF: the keystone for breeder development

    Ziff, J.J.; Arneson, S.O.


    This paper describes the role of the Fast Flux Test Facility (FFTF) in the US Department of Energy sponsored Liquid Metal Fast Breeder Reactor (LMFBR) Program. The programs that are in place to ensure that the FFTF fulfills its role as an essential key to the development of LMFBR technology are delineated. A detailed FFTF Operating Plan has been developed to present in integrated form the strategy for gaining maximum useful information from the planned FFTF operations. The three principal areas of FFTF Utilization: Plant Utilization, Irradiation Testing, and Safety, combine to form the overall FFTF Operating Plan. Primary areas where FFTF is already making major contributions to LMFBR development are described

  18. Design activities of a fusion experimental breeder

    Huang, J.; Feng, K.; Sheng, G.


    The fusion reactor design studies in China are under the support of a fusion-fission hybrid reactor research Program. The purpose of this program is to explore the potential near-term application of fusion energy to support the long-term fusion energy on the one hand and the fission energy development on the other. During 1992-1996 a detailed consistent and integral conceptual design of a Fusion Experimental Breeder, FEB was completed. Beginning from 1996, a further design study towards an Engineering Outline Design of the FEB, FEB-E, has started. The design activities are briefly given. (author)

  19. Tritium dynamics in fusion reactor solid breeder

    Violante, V.


    In the field of the NET research progrm, the chemical and diffusive processes involved in solid ceramic breeder materials have been analysed. A mathematical model describing the phenomena has been developed to obtain a quantitative evaluation for a first design approach. The data obtained by means of the above mentioned model are in good agreement with the data obtained by other research groups working in Europe and in United States. The computer codes BLANKET2, MC2, FWBC, have been developed to simulate the phenomena

  20. ITER solid breeder blanket materials database

    Billone, M.C.; Dienst, W.; Noda, K.; Roux, N.


    The databases for solid breeder ceramics (Li 2 ,O, Li 4 SiO 4 , Li 2 ZrO 3 and LiAlO 2 ) and beryllium multiplier material are critically reviewed and evaluated. Emphasis is placed on physical, thermal, mechanical, chemical stability/compatibility, tritium, and radiation stability properties which are needed to assess the performance of these materials in a fusion reactor environment. Correlations are selected for design analysis and compared to the database. Areas for future research and development in blanket materials technology are highlighted and prioritized

  1. Tritium behaviour in ceramic breeder blankets

    Miller, J.M.


    Tritium release from the candidate ceramic materials, Li 2 O, LiA10 2 , Li 2 SiO 3 , Li 4 SiO 4 and Li 2 ZrO 3 , is being investigated in many blanket programs. Factors that affect tritium release from the ceramic into the helium sweep gas stream include operating temperature, ceramic microstructure, tritium transport and solubility in the solid. A review is presented of the material properties studied and of the irradiation programs and the results are summarized. The ceramic breeder blanket concept is briefly reviewed

  2. Basic characteristics of an efficient fusion breeder

    Gordon, C W; Harms, A A [McMaster Univ., Hamilton, Ontario (Canada). Dept. of Physics


    Some reactor physics characteristics of an efficient fusion breeder, consisting of an integrated fusion-fission reactor system with fissile and fusile fuel linkages, are examined. Core parameters of existing fission reactors and proposed fusion reactors are used to determine the system fissile fuel breeding gain, the fissile fuel doubling time, the nuclear fuel production capacity and the ratio of fusion-to-fission thermal power. It is concluded that such a symbiotic reactor configuration possesses considerable merit from the standpoint of long-term supply of fissile fuel and provides new options for the development of the next generation of nuclear energy systems.

  3. The development of breeder reactors in Japan

    Segawa, M.


    In the framework of a global analysis of the various available sources of energy, Japan has reserved a prominent place to the nuclear energy and, in the long-term view, to the breeder reactor which will be due for commercial deployment in 20)10. To achieve these objectives, three stages are envisaged, one of the experimental reactor Joyo (in service), one of the demonstration reactor Monju (its construction has been decided), and one of the pre-commercial reactor (due to be taken in hand at the beginning of the Nineties). Efforts will be made in parallel concerning the fuel cycle [fr

  4. Ecologies of socialism: Soviet Gradostroitel'stvo and late soviet socialism

    Timothy Alexander Nunan


    Full Text Available The most lasting legacy of the Soviet experience, more so than institutions that persist in the Russian Federation today or the mentalities of citizens of post-Soviet states, was its transformation of Eurasia from a rural continent into an urban one. Particularly after the Great Patriotic War, the landscape of Soviet urban spaces changed as countless rows of low-quality apartment housing sprung up and a uniform socialist urban culture appeared to be forming. However, how and why this urban revolution happened, and what effect it had on the psychological makeup of Soviet citizens, remains lesser known. Meanwhile, while scholars of urban history such as Jane Jacobs, Reyner Banham, Lewis Mumford, and Mike Davis have produced fascinating tracts and monographs on the “ecologies” of American urban spaces – how, in other words, human beings in various political systems have interacted with the built urban landscape around them – limited work has been done on similar processes and histories in the Soviet world beyond the technical literature of the Cold War era. In this paper, I attempt to provide the outlines of such a history with such an approach by analyzing how changes in the Soviet urban fabric from approximately 1932 to 1980s affected social life in Soviet cities and among Soviet families. Basing my argument on close readings of Soviet books on gradostroitel'stvo (urban construction, urban studies as well as literature, and guided by the insights of the above-listed urbanist thinkers, I argue that changes in urban planning so altered the relationship between citizens, the Party, and History that the Soviet system lost key strengths that had emboldened it during the 1930s and 1940s. In particular, while new Soviet housing projects obviously raised the standard of living of a great portion of the population, in resolving the housing problem, they also dismantled the “stranger's gaze” – the everyday urban clashes that, enabled by

  5. Fast Breeder Project status report, 1974

    Hueper, R.

    A compilation of the papers read at the Status Report of the Fast Breeder Project at the Karlsruhe Nuclear Research Center on March 26, 1974 is presented. The first papers present a general survey of the present state of research and development work performed by the German, Belgian, and Netherlands research centers on the SNR 300 Prototype Fast Breeder Reactor (Kalkar Nuclear Power Station), on the SNR follow-on program, alternative fuels and coolants and basic problems, on work performed by industry with respect to the licensing procedure and construction of the SNR 300, and on commissioning and the planned conversion of KNK, the Compact Sodium Cooled Nuclear Reactor. The detailed papers deal with results elaborated at the institutes of GfK Karlsruhe, SCK/CEN Mol, RCN Petten, and TNO Apeldoorn. Most of these efforts have been concentrated upon fuel pin and materials development and on the physics and safety of fast reactors. The status report concludes with a reference to the future program under the Project. (U.S.)

  6. Chemical surveillance of commercial fast breeder reactors

    Stamm, H.H.; Stade, K.Ch.


    After BN-600 (USSR) and SUPERPHENIX (France) were started succesfully, the international development of LMFBRs is standing at the doorstep of commercial use. For commercial use of LMFBRs cost reductions for construction and operation are highly desirable and necessary. Several nations developing breeder reactors have joined in a common effort in order to reach this aim by standardization and harmonization. On the base of more than 20 years of operation experience of experimental reactors (EBR-II, FFTF, RAPSODIE, DFR, BR-5/BR-10, BOR-60, JOYO, KNK-II) and demonstration plants (PHENIX, PFR, BN-350), possibilities for standardization in chemical surveillance of commercial breeder reactors without any loss of availability, reliability and reactor safety will be discussed in the following chapters. Loop-type reactors will be considered as well as pool-type reactors, although all commercial plants under consideration so far (SUPERPHENIX II, BN-800, BN-1600, CFBR, SNR-2, EFR) include pool-type reactors only. Table 1 gives a comparison of the Na inventories of test reactors, prototype plants and commercial LMFBRs

  7. Prototype fast breeder reactor main options

    Bhoje, S.B.; Chellapandi, P.


    Fast reactor programme gets importance in the Indian energy market because of continuous growing demand of electricity and resources limited to only coal and FBR. India started its fast reactor programme with the construction of 40 MWt Fast Breeder Test Reactor (FBTR). The reactor attained its first criticality in October 1985. The reactor power will be raised to 40 MWt in near future. As a logical follow-up of FBTR, it was decided to build a prototype fast breeder reactor, PFBR. Considering significant effects of capital cost and construction period on economy, systematic efforts are made to reduce the same. The number of primary and secondary sodium loops and components have been reduced. Sodium coolant, pool type concept, oxide fuel, 20% CW D9, SS 316 LN and modified 9Cr-1Mo steel (T91) materials have been selected for PFBR. Based on the operating experience, the integrity of the high temperature components including fuel and cost optimization aspects, the plant temperatures are recommended. Steam temperature of 763 K at 16.6 MPa and a single TG of 500 MWe gross output have been decided. PFBR will be located at Kalpakkam site on the coast of Bay of Bengal. The plant life is designed for 30 y and 75% load factor. In this paper the justifications for the main options chosen are given in brief. (author). 2 figs, 2 tabs

  8. Coincidence measurements of FFTF breeder fuel subassemblies

    Eccleston, G.W.; Foley, J.E.; Krick, M.; Menlove, H.O.; Goris, P.; Ramalho, A.


    A prototype coincidence counter developed to assay fast breeder reactor fuel was used to measure four fast-flux test facility subassemblies at the Hanford Engineering Development Laboratory in Richland, Washington. Plutonium contents in the four subassemblies ranged between 7.4 and 9.7 kg with corresponding 240 Pu-effective contents between 0.9 and 1.2 kg. Large count rates were observed from the measurements, and plots of the data showed significant multiplication in the fuel. The measured data were corrected for deadtime and multiplication effects using established formulas. These corrections require accurate knowledge of the plutonium isotopics and 241 Am content in the fuel. Multiplication-corrected coincidence count rates agreed with the expected count rates based on spontaneous fission-neutron emission rates. These measurements indicate that breeder fuel subassemblies with 240 Pu-effective contents up to 1.2 kg can be nondestructively assayed using the shift-register electronics with the prototype counters. Measurements using the standard Los Alamos National Laboratory shift-register coincidence electronics unit can produce an assay value accurate to +-1% in 1000 s. The uncertainty results from counting statistics and deadtime-correction errors. 3 references, 8 figures, 8 tables

  9. Fast breeder reactor fuel reprocessing in France

    Bourgeois, M.; Le Bouhellec, J.; Eymery, R.; Viala, M.


    Simultaneous with the effort on fast breeder reactors launched several years ago in France, equivalent investigations have been conducted on the fuel cycle, and in particular on reprocessing, which is an indispensable operation for this reactor. The Rapsodie experimental reactor was associated with the La Hague reprocessing plant AT1 (1 kg/day), which has reprocessed about one ton of fuel. The fuel from the Phenix demonstration reactor is reprocessed partly at the La Hague UP2 plant and partly at the Marcoule pilot facility, undergoing transformation to reprocess all the fuel (TOR project, 5 t/y). The fuel from the Creys Malville prototype power plant will be reprocessed in a specific plant, which is in the design stage. The preliminary project, named MAR 600 (50 t/y), will mobilize a growing share of the CEA's R and D resources, as the engineering needs of the UP3 ''light water'' plant begins to decline. Nearly 20 tonnes of heavy metals irradiated in fast breeder reactors have been processed in France, 17 of which came from Phenix. The plutonium recovered during this reprocessing allowed the power plant cycle to be closed. This power plant now contains approximately 140 fuel asemblies made up with recycled plutonium, that is, more than 75% of the fuel assemblies in the Phenix core

  10. Breeding blanket development. Tritium release from breeder

    Tsuchiya, Kunihiko; Kawamura, Hiroshi; Nagao, Yoshiharu


    Engineering data on neutron irradiation performance of tritium breeders are needed to design the breeding blanket of fusion reactor. In this study, tritium release experiments of the breeders were carried out to examine the effects of various parameters (such as sweep gas flow rate, hydrogen content in sweep gas, irradiation temperature and thermal neutron flux) on tritium generation and release behavior. Lithium titanate (Li 2 TiO 3 ) is considered as a candidate tritium breeder in the blanket design of International Thermonuclear Experimental Reactor (ITER). As for the shape of the breeder material, a small spherical form is preferred to reduce the thermal stress induced in the breeder. Li 2 TiO 3 pebbles of about 170g in total weight and with 0.3 and 2 mm in diameter were manufactured by a wet process, and an assembly packed with the binary Li 2 TiO 3 pebbles was irradiated in Japan Materials Testing Reactor (JMTR). The tritium was generated in the Li 2 TiO 3 pebble bed and released from the pebble bed, and was swept downstream using the sweep gas for on-line analysis of tritium content. Concentration of total tritium and gaseous tritium (HT or T 2 gas) released from the Li 2 TiO 3 pebble bed were measured by ionization chambers, and the ratio of (gaseous tritium)/(total tritium) was evaluated. The sweep gas flow rate was changed from 100 to 900cm 3 /min, and hydrogen content in the sweep gas was changed from 100 to 10000 ppm. Furthermore, thermal neutron flux was changed using a window made of hafnium (Hf) neutron absorber. The irradiation temperature at an outer region of the Li 2 TiO 3 pebble bed was held between 200 and 400degC. The main results of this experiment are summarized as follows. 1) When the temperature at the outside edge of the Li 2 TiO 3 pebble bed exceeded 100degC, the tritium release from the Li 2 TiO 3 pebble bed started. The ratio of the tritium release rate and the tritium generation rate (normalized tritium release rate: R/G) reached

  11. Superphenix: Is the fast breeder dream over -- or over yonder?



    A detailed history of France's Superphenix commercial fast breeder reactor project is presented. Important project milestones are discussed from the project's conception in 1971 to its current status. Recommendations of the Castaing Commission on the project and future plans for use of the reactor are outlined. In addition, world wide fast breeder projects are listed and discussed

  12. Management of Waste from the Fusion Experimental Breeder


    <正> Fusion breeder might be an essential intermediate application of fusion energy at earlier term, which has the potential to provide plenty of commercial fissile fuel. Based on fusion physics and technologies available at present and in near future, the realistic Fusion Experimental Breeder, FEB-E was designed. The obiectives of the FEB-E are to demonstrate the engineering feasibility of

  13. Perestroika and Its Impact on the Soviet Labor Market.

    Brand, Horst


    Discusses two books, "Restructuring the Soviet Economy: In Search of the Market" and "In Search of Flexibility: The New Soviet Labour Market," that assess the success of perestroika and the transition to a market-based economy. (JOW)

  14. Former Soviet Union Hydrological Snow Surveys, 1966-1996

    National Oceanic and Atmospheric Administration, Department of Commerce — The Former Soviet Union Hydrological Snow Surveys are based on observations made by personnel at 1,345 sites throughout the Former Soviet Union between 1966 and...

  15. Managing Uncertainity: Soviet Views on Deception, Surprise, and Control

    Hull, Andrew


    .... In the first two cases (deception and surprise), the emphasis is on how the Soviets seek to sow uncertainty in the minds of the enemy and how the Soviets then plan to use that uncertainty to gain military advantage...

  16. Evolution of Soviet Theater Nuclear Forces

    Atkeson, E.B.


    Soviet theater nuclear forces were a major pillar of Soviet superpower strength, rising sharply under Krushchev in the latter 1950s to their zenith under Brezhnev twenty years later. Most recently they have begun their decline under Gorbachev, and while not yet facing extinction, may be headed for a much reduced role under the new thinking in the USSR. This paper deals with the Soviet TNF in six periods of their life: The Post-war Stalin Period (1945-1953), the Post-Stalin Period (1953-1955), The Transition Period (1955-1959), The Period of Nuclear Revolution (1960-1964), The Period of Modern TNF Planning (1965-1980), and The Period of Non-nuclear Planning (1980-1987)

  17. The need for high performance breeder reactors

    Vaughan, R.D.; Chermanne, J.


    It can be easily demonstrated, on the basis of realistic estimates of continued high oil costs, that an increasing portion of the growth in energy demand must be supplied by nuclear power and that this one might account for 20% of all the energy production by the end of the century. Such assumptions lead very quickly to the conclusion that the discovery, extraction and processing of the uranium will not be able to follow the demand; the bottleneck will essentially be related to the rate at which the ore can be discovered and extracted, and not to the existing quantities nor their grade. Figures as high as 150.000 T/annum and more would be quickly reached, and it is necessary to wonder already now if enough capital can be attracted to meet these requirements. There is only one solution to this problem: improve the conversion ratio of the nuclear system and quickly reach the breeding; this would lead to the reduction of the natural uranium consumption by a factor of about 50. However, this condition is not sufficient; the commercial breeder must have a breeding gain as high as possible because the Pu out-of-pile time and the Pu losses in the cycle could lead to an unacceptable doubling time for the system, if the breeding gain is too low. That is the reason why it is vital to develop high performance breeder reactors. The present paper indicates how the Gas-cooled Breeder Reactor [GBR] can meet the problems mentioned above, on the basis of recent and realistic studies. It briefly describes the present status of GBR development, from the predecessors in the gas cooled reactor line, particularly the AGR. It shows how the GBR fuel takes mostly profit from the LMFBR fuel irradiation experience. It compares the GBR performance on a consistent basis with that of the LMFBR. The GBR capital and fuel cycle costs are compared with those of thermal and fast reactors respectively. The conclusion is, based on a cost-benefit study, that the GBR must be quickly developed in order

  18. The Soviet RBMK-1000 containment system

    Joosten, J.K.


    Following the accident in April, 1986, considerable attention was focused on the failure of the containment at the Chernobyl RBMK-1000 nuclear power plant. Conflicting statements arose regarding the nature of the plant's containment system primarily because of terminology differences, translation difficulties and lack of reliable information. This article, based on reports and briefings by the Soviet delegation, during the post-accident review meetings in Vienna and prior publications is intended to clarify perceptions of the Soviet RMBK-1000 nuclear power plant containment system design, and its relevance to containment management concepts. (author)

  19. Soviet Archaeological Expedition as a Research Object

    Olga Sveshnikova


    Full Text Available Soviet archaeological expeditions are the main focus of my research. They provide us with very interesting examples of archaeological expeditions as a part of a society, and not only as a part of science. After the 1960s it was an especially popular leisure practice. Many people who were not professional archaeologists went on expeditions in their leisure time and worked there as diggers or shovelmen (excavators. A Soviet archaeologist described them as people who ‘prefer to spend their vacation in archaeological expeditions in various parts of our country instead of seaside resorts.

  20. Soviet exoatmospheric neutral particle beam research

    Leiss, J.E.; Abrams, R.H.; Ehlers, K.W.; Farrell, J.A.; Gillespie, G.H.; Jameson, R.A.; Keefe, D.; Parker, R.K.


    This technical assessment was performed by a panel of eight U.S. scientists and engineers who are familiar with Soviet research through their own research experience, their knowledge of the published scientific literature and conference proceedings, and personal contacts with Soviet scientists and other foreign colleagues. Most of the technical components of a neutral particle beam generating system including the ion source, the accelerator, the accelerator radio frequency power supply, the beam conditioning and aiming system, and the beam neutralizer system are addressed. It does not address a number of other areas important to an exoatmospheric neutral beam system

  1. The secret of the Soviet hydrogen bomb

    Wellerstein, Alex; Geist, Edward


    Was the first Soviet thermonuclear device really a step in the wrong direction? No bomb design has been as much maligned or otherwise disparaged as the first Soviet thermonuclear weapon. Detonated in August 1953, the bomb, officially tested under the name RDS-6s but usually known as Sloika or "layer cake" (the name Andrei Sakharov coined for it), was nothing to sneeze at. Shown in Figure 1 and able to be dropped from aircraft, it released the explosive equivalent, or yield, of almost half a megaton of TNT. The result was a blazing fireball with 20 times the power of the bomb that leveled Nagasaki, Japan.

  2. Method for cooling a breeder reactor and breeder reactor for applying the method

    Gast, K.


    The fuel assemblies of the fission zone and the breeder subassemblies in the radial breeding blanket are supported on a double bottom. The coolant gets into the interspace of the double bottom below the blanket. This part of the space is separated from the interspace of the double bottom below the fission zone. Each breeder subassembly consists of a twin tube. The coolant enters the inner tube, flows through it upwards in axial direction, is then deflected on the upper end, and afterwards, in the annulus of the twin tube, flows down again in axial direction into the inlet region, below the double bottom. From there on it flows upwards through the fuel assemblies of the fission zone from below. Thereby a uniformly high coolant outlet temperature is obtained. (DG) [de

  3. Scenario for commercialization of fast breeder reactors

    Kumaoka, Yoshio; Sato, Morihiko


    To realize the commercialization of fast breeder reactors (FBRs), it is essential to reduce construction costs to the same level as those for the current light water reactors. For this target to be attained, a highly important factor is to reduce to the lowest-levels possible the quantities of materials and volume of the buildings required for the primary and secondary sodium loops of the FBR. In this direction, an innovative compact FBR plant concept which holds promise for commercialization has been developed by introducing the pooltype reactor concept with the shortest possible secondary sodium loops, realized by coupling electromagnetic pumps with the steam generators. In comparison with the French Super Phenix reactor, for example, the construction of this 1,300-MWe FBR plant could be achieved with half the material quantities and plant volume required by the former type. (author)

  4. Superalloy applications in the fast breeder reactor

    Powell, R.W.


    The economics of the LMFBR are dependent on the breeding of new fuel in the reactor core and this can be improved by the use of advanced alloys as core structural components. The environment of the core makes superalloys a natural choice for these components, but phenomena related directly to neutron irradiation necessitate extensive testing. Consequently, commercially-available superalloys, together with a number of developmental alloys are being tested in existing LMFBR's and by simulation techniques to determine the best alloy for use in the LMFBR core. It presently appears that such materials will indeed be capable of the performance required, and will greatly facilitate the commercial realization of the fast breeder reactor

  5. Steam explosions in sodium cooled breeder reactors

    Lundell, B.


    Steam explosion is considered a physical process which transport heat from molten fuel to liquid coolant so fast that the coolant starts boiling in an explosion-like manner. The arising pressure waves transform part of the thermal energy to mechanical energy. This can stress the reactor tank and threaten its hightness. The course of the explosion has not been theoretical explained. Experimental results indicate that the probability of steam explosions in a breeder reactor is small. The efficiency of the transformation of the heat of fusion into mechanical energy in substantially lower than the theoretical maximum value. The mechanical stress from the steam explosion on the reactor tank does not seem to jeopardize its tightness. (G.B.)

  6. Thermal baffle for fast-breeder reactor

    Rylatt, J.A.


    A liquid-metal-cooled fast-breeder reactor includes a bridge structure for separating hot outlet coolant from relatively cool inlet coolant consisting of an annular stainless steel baffle plate extending between the core barrel surrounding the core and the thermal liner associated with the reactor vessel and resting on ledges thereon, there being inner and outer circumferential webs on the lower surface of the baffle plate and radial webs extending between the circumferential webs, a stainless steel insulating plate completely covering the upper surface of the baffle plate and flex seals between the baffle plate and the ledges on which the baffle plate rests to prevent coolant from washing through the gaps therebetween. The baffle plate is keyed to the core barrel for movement therewith and floating with respect to the thermal liner and reactor vessel. 3 claims, 2 figures

  7. Neutronic studies of a 233U breeder

    Hansen, L.F.; Maniscalco, J.A.


    Neutronic calculations have been carried out to design a laser fusion driven hybrid blanket which maximizes 233 U production per unit of thermal energy (>1 kg/MW/sub T/-year) with acceptable fusion energy multiplication (M/sub F/ approx. 4). Two hybrid blankets, a thorium and a uranium--thorium blanket, are discussed in detail and their performance is evaluated by incorporating them into an existing hybrid design (the LLL/Bechtel design). The performance of these two blankets is discussed in terms of their energy multiplication, tritium breeding and fissile fuel production. The neutronic calculations have been done for two neutron libraries, the ENDF/B-IV and the ENDL with differences no larger than 10% in the results. An estimate is given of the number of equivalent thermal power fission reactors (LWR, HWR, SSCR, and HTGR) that these fusion breeders can fuel

  8. The economics of fast breeder reactors

    Rapin, M.


    The overall status of the fast breeder reactor (FBR) system is periodically reviewed in France. In 1983, a report was prepared on the status and prospects of the FBR system at the request of the then Minister of Industry. Five years later, Electricite de France (EdF) and the French Atomic Energy Commission (CEA) jointly updated this report. The FBR reactor system economic considerations mentioned here are taken from the work performed in 1987-88 for this updating. The position in 1983 is reviewed to highlight concrete developments. Developments that have occurred since then are presented, along with the prospects that today enable us to define better the technical and economic potential of the FBR system. In conclusion, the effects of these findings on desirable directions are discussed, in particular with regard to European FBR cooperation. (author)

  9. Fusion breeder sphere - PAC blanket design

    Sullivan, J.D.; Palmer, B.J.F.


    There is a considerable world-wide effort directed toward the production of materials for fusion reactors. Many ceramic fabrication groups are working on making lithium ceramics in a variety of forms, to be incorporated into the tritium breeding blanket which will surround the fusion reactor. Current blanket designs include ceramic in either monolithic or packed sphere bed (sphere-pac) forms. The major thrust at AECL is the production of lithium aluminate spheres to be incorporated in a sphere-pac bed. Contemporary studies on breeder blanket design offer little insight into the requirements on the sizes of the spheres. This study examined the parameters which determine the properties of pressure drop and coolant requirements. It was determined that an optimised sphere-pac bed would be composed of two diameters of spheres: 75 weight % at 3 mm and 25 weight % at 0.3 mm

  10. Breeder control fusion reactor. Topical interview

    Schlueter, A [Max-Planck-Institut fuer Plasmaphysik, Garching/Muenchen (Germany, F.R.)


    The energy sources of the future are extremely controversial. The consumption of fossil fuel shall decrease during the next decades, because exhaustion of the resources, pollution, increase of CO/sub 2/ in the atmosphere and other reasons. But at present the question it not yet settled which alternative energy system should replace the fossil fuel. First of all nuclear energy in the form of fission reactions seems to come into operation to a larger extent. The next step may be the controlled thermonuclear fusion reaction. Furthermore, a comparison between fusion and fission is given which shows that fusion would bring about less risks than the breeders. An advantage of the fusion reactor would be the fact that the fuel cycle is closed. Unfortunately, the physical questions are not as yet satisfactorily clarified so that one cannot be sure whether a fusion reactor can really be built.

  11. Fast breeder reactor safety : a perspective

    Kale, R.D.


    Taking into consideration India's limited reserves of natural and vast reserves of thorium, the fast reactor route holds a great promise for India's energy supply in future. The fast reactor fueled with 239 Pu/ 238 U (unused or depleted) produces (breeds) more fissionable fuel material 239 Pu than it consumes. Calculations show that a fast breeder reactor (FBR) increases energy potential of natural uranium by about 60 times. As the fast reactor can also convert 232 Th into 233 U which is a fissionable material, it can make India's thorium reserves a source of almost inexhaustible energy supply for a long time to come. Significant advantage of FBR plants cooled by sodium and their world-wide operating experience are reviewed. There are two main safety issues of FBR, one nuclear and the other non-nuclear. The nuclear issue concerns core disruptive accident and the non-nuclear one concerns the high chemical energy potential of sodium. These two issues are analysed and it is pointed that they are manageable by current design, construction and operational practices. Main findings of safety research during the last six to eight years in West European Countries and United States of America (US) are summarised. Three stage engineered safety provision incorporated into the design of the sodium cooled Fast Breeder Test Reactor (FBTR) commissioned at Kalpakkam are explained. The important design safety features of FBTR such as primary system containment, emergency core cooling, plant protection system, inherent safety features achieved through reactivity coefficients, and natural convection cooling are discussed. Theoretical analysis and experimental research in fast reactor safety carried out at the Indira Gandhi Centre for Atomic Research during the past some years are reviewed. (M.G.B.)

  12. Advancing further the history of Soviet psychology: moving forward from dominant representations in Western and Soviet psychology.

    González Rey, Fernando L


    This article discusses the works of some Soviet scholars of psychology, their theoretical positions, and the times within which their works were developed. Dominant representations of Soviet psychology and some of the main Soviet authors are revisited in the light of a blending of facts actively associated with their emergence in both Soviet and Western psychology. From the beginning, Soviet psychology was founded upon Marxism. However, the ways by which that psychology pretended to become Marxist in its philosophical basis were diverse and often contradictory. Other philosophical and theoretical positions also influenced Soviet psychologists. Different moments of that contradictory process are discussed in this article, and through this, I bring to light their interrelations and the consequences for the development of Soviet psychology. This article reinterprets several myths found within Soviet psychology, in which different theoretical representations have become institutionalized for long periods in both Soviet and Western psychology. Particular attention is given to identifying the conditions that presented Vygotsky, Luria, and Leontiev as part of the same paradigm, and which paved the way for a perception of Leontiev and his group as paralleling Vygotsky's importance among American psychologists. Many of the sources that are used in this article were published in Soviet psychology only after the 1970s. Unlike the different and interesting works that began to appear on diverse trends in Soviet psychology, this article details in depth the articulation of topics and questions that still now are presented as different chapters in the analysis of Soviet psychology.

  13. Soviet Union: Summer school goes international



    The traditional annual Soviet Summer School, held in June in Dubna on the banks of the Volga, this year had international participation for the first time. Initiated by Moscow's Physical Engineering Institute and the Joint Institute for Nuclear Research, Dubna, the school has rotating themes, with the accent this year on developments in high energy physics.

  14. US - Former Soviet Union environmental management activities


    The Office of Environmental Management (EM) has been delegated the responsibility for US DOE's cleanup of nuclear weapons complex. The nature and the magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. This booklet makes comparisons and describes coordinated projects and workshops between the USA and the former Soviet Union

  15. Soviet Union: Summer school goes international



    The traditional annual Soviet Summer School, held in June in Dubna on the banks of the Volga, this year had international participation for the first time. Initiated by Moscow's Physical Engineering Institute and the Joint Institute for Nuclear Research, Dubna, the school has rotating themes, with the accent this year on developments in high energy physics

  16. Redefined Soviet military doctrine in perspective

    Menning, B.W.


    On May 29, 1987, the Warsaw Pact's Political Consultative Committee issued a communique proclaiming that the military doctrine of the Warsaw Pact member states is strictly defensive and proceeds from the fact that the application of military means to resolve any dispute is inadmissible under current conditions. Following this declaration, a corresponding redefinition of Soviet military doctrine to emphasize defensiveness and war prevention has evoke lively commentary and debate in both the West and the East. Because doctrinal issues are likely to retain significance during arms control and security negotiations. The purpose of this paper is to highlight important trends associated with a continuing dialogue over Soviet military doctrine and to assess what the future portends as doctrinal discussions unfold. Since 1987 the accelerating pace of change has accentuated the importance of doctrinally related concerns. As a result of the INF Treaty and the Stockholm agreement, there has been greater transparency regarding Soviet and Warsaw Pact military developments. On December 7, 1988, General Secretary Mikhail Gorbachev announced unilateral troop reduction over the next two years, which, when completed, would reduce the offensive capabilities of Soviet forces in Eastern Europe. In March 1989 talks on Confidence- and Security-Building Measures (CSBM) opened in Vienna, with suggestions for exchanges of views on military policy. At the very same time, NATO and the Warsaw Pact began formal negotiations on reduction of Conventional Forces in Europe (CFE) with a specific mandate to reduce those asymmetries that most favored prosecution of deep operations

  17. Themes in Current Soviet Curriculum Reform.

    Popkewitz, Thomas S.; Tabachnick, B. Robert


    Soviet educators are first of all "upbringers" whose prime task is the formation and maintenance of the socialist outlook. They base their teaching on dialectical materialism, assume there are law-like principles of teaching and learning, and are inexhaustibly optimistic. (Author)

  18. Economic Equilibrium and Soviet Economic Reform

    Herbert E. Scarf


    The paper, prepared for a Roundtable on Major Economic Problems in the U.S. and the U.S.S.R., discusses some aspects of price theory ñ in particular, the theory of general equilibrium -ñ which may offer some theoretical insights about the economic problems to be encountered during the transition from Socialism to private markets in the Soviet Union.

  19. Landmarks in the Literature: Super Soviet Pedagogue.

    Alston, Patrick L.


    Anton Makarenko became a national hero for effecting education for communism in the 1920s. His book, "The Road to Life," is an artistic achievement and the most widely read and influential work on education in the Soviet Union. But Makarenko's legacy is more myth than model in present-day Russia. (Author/SJL)

  20. The Soviet Air Force and Strategic Bombing


    to envision a British Air Force that could be totally divorced from some form of ground support role. Consequently, he saw an air campaign that would...CA: Presidio Press, 1986. Black, Steven K. The Icarus Illusion: Technology, Doctrine and the Soviet Air Force. Monterrey , CA, 1986. Cockburn, Andrew

  1. Inside the World of the Soviet Professional.

    Rogers, Carl R.


    Reports on a fall 1986 journey of Carl Rogers to the U.S.S.R. during which Rogers conducted lectures and workshops on humanistic psychology. Elaborates on workshop sessions with Russian psychologists and therapists. Concludes with general observations about what the workshops may have accomplished and on the Soviet lifestyle in general. (BR)

  2. Soviet precision timekeeping research and technology

    Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.


    This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs.

  3. Soviet precision timekeeping research and technology

    Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.


    This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs

  4. JPRS Report. Soviet Union: International Affairs


    peoples. Kkhir Dzhokhari states that the recent success- ful visit of Malaysian Prime Minister Mahathir bin Mohamad to the Soviet Union, which In his speeches during his stay in the USSR in July and August of this year, Prime Minister Mahathir bin Moha- mad, emphasizing the "coincidence

  5. Carter's breeder policy has failed, claims Westinghouse manager



    Nuclear nations developing liquid metal fast breeder reactor (LMFBR) technology have not been dissuaded by President Carter's efforts to stop the breeder program as a way to control the proliferation of nuclear weapons. There is no evidence that Carter's policy of moral persuasion has had any impact on their efforts. A review of the eight leading countries cites their extensive progress in the areas of breeder technology and fuel reprocessing, while the US has made only slight gains. The Fast Flux Test Facility at Hanford is near completion, but the Clinch River project has been slowed to a minimum

  6. 3rd quarterly report 1976 of the Fast Breeder Project


    The report describes activities which were performed within the framework of the Fast Breeder Project at the Gesellschaft fuer Kernforschung mbH Karlsruhe (GfK) or on behalf of the GfK during the third quarter. It contains contributions on the following subjects: Fuel rod development, material studies and development, corrosion tests and coolant analyses, physical experiments, reactor theory, safety of fast breeders, instrumentation and signal processing for core monitoring, environmental impacts, sodium technology tests, thermo- and fluid-dynamic tests in gas, tests concerning gas-cooled breeders. (HR) [de

  7. Uranium utilization of light water cooled reactors and fast breeders

    Stojadinovic, Timm


    The better uranium utilization of fast breeder reactors as compared with water cooled reactors is one argument in favour of the breeder introduction. This report tries to quantify this difference. It gives a generally valid formalism for the uranium utilization as a function of the fuel burnup, the conversion rate, fuel cycle losses and the fuel enrichment. On the basis of realistic assumptions, the ratio between the utilizations of breeder reactors to that of light water cooled reactors (LWR) amounts to 180 for the open LWR cycle and 100 in case of plutonium recycling in LWRs

  8. Alternative cycles and fast breeders, a look to the future

    Dahlberg, R.C.


    The various nuclear strategies that have been proposed to eke out available uranium are briefly summarised. A recent approach is to develop the concept of a 'transitional symbiosis strategy' which accepts the principle of the fast breeder/advanced converter for the long-range future, and to suggest that advanced converters be designed to be near-breeders. Some of the issues affecting strategic planning in the transitional period are reviewed further. The need for the thorium cycle in both advanced converters (or near breeders) and fast reactors is emphasised. This type of high temperature gas-cooled reactor appears to be the technology most suited for symbiosis with FBRs. (UK)

  9. Symbiosis of near breeder HTR's with hybrid fusion reactors

    Seifritz, W.


    In this contribution to INFCE a symbiotic fusion/fission reactor system, consisting of a hybrid beam-driven micro-explosion fusion reactor (HMER) and associated high-temperature gas-cooled reactors (HTR) with a coupled fuel cycle, is proposed. This system is similar to the well known Fast Breeder/Near Breeder HTR symbiosis except that the fast fission breeder - running on the U/Pu-cycle in the core and the axial blankets and breeding the surplus fissile material as U-233 in its radial thorium metal or thorium oxide blankets - is replaced by a hybrid micro-explosion DT fusion reactor

  10. A comparison of fusion breeder/fission client and fission breeder/fission client systems for electrical energy production

    Land, R.J.; Parish, T.A.


    A parametric study that evaluated the economic performance of breeder/client systems is described. The linkage of the breeders to the clients was modelled using the stockpile approach to determine the system doubling time. Since the actual capital costs of the breeders are uncertain, a precise prediction of the cost of a breeder was not attempted. Instead, the breakeven capital cost of a breeder relative to the capital cost of a client reactor was established by equating the cost of electricity from the breeder/client system to the cost of a system consisting of clients alone. Specific results are presented for two breeder/client systems. The first consisted of an LMFBR with LWR clients. The second consisted of a DT fusion reactor (with a 238 U fission suppressed blanket) with LWR clients. The economics of each system was studied as a function of the cost of fissile fuel from a conventional source. Generally, the LMFBR/LWR system achieved relatively small breakeven capital cost ratios; the maximum ratio computed was 2.2 (achieved at approximately triple current conventional fissile material cost). The DTFR/LWR system attained a maximum breakeven capital cost ratio of 4.5 (achieved at the highest plasma quality (ignited device) and triple conventional fissile cost)

  11. Ethnicity and Power in the Soviet Union

    Andrzej Wierzbicki


    Full Text Available Twenty years have passed since the dissolution of the Soviet Union. Up until the point of dissolution, the Soviet authorities and intellectual elite had attempted to build a community in order to unite all Soviet citizens in the spirit of socialist modernisation. Although it is difficult to demonstrate that ‘a Soviet nation’ was successfully created [1], the attempt to build such a nation can serve as a case study through which to examine nation-building processes for constructivists as well as modernists . In addition to socialist modernisation, the Soviet nation aimed to be identified as a state, which would make it similar to the political nations dominant in western countries. Contrary to western tradition, however, it was not a nation state that provided full rights for all its citizens, but rather a socialist state that was ‘ruled by workers and peasantry’. Nevertheless, the authorities aimed to give the Soviet nation the characteristics of a specific nation state. “It was a nation that in historical terms strived, or more accurately part of which strived, to form or proclaim a particular state” [2]. While at the time of proclaiming the USSR there was no such thing as the Soviet nation, it can be assumed that it was intended to become a constructed titular nation. The majority of national communities, even created ones, have an ethnic core. However academics cannot agree on the kind of state the USSR was, to what extent it took into account the ethnicity of its multinational population, how much it reflected the values, culture, and interests of its largest population group (i.e., the Russians or even whether it was a Russian national state despite the strong influence of Russian ideology and politics. Some Russian academics, especially those in nationalistic circles (e.g., Valerij Solovej as well as western scholars such as Terry Martin and Geoffrey Hosking stressed that Russians dominated demographically and politically

  12. A review of prospects for an accelerator breeder

    Fraser, J.S.; Hoffman, C.R.; Schriber, S.O.; Garvey, P.M.; Townes, B.M.


    The scientific feasibility, engineering practicability and economic prospects for an Accelerator Breeder are reviewed. The scientific feasibiliity of high power accelerator components rests on a firm basis as a result of technical advances made in recent years but there is a need to combine all components in a demonstration model working under realistic conditions. The engineering practicability of Accelerator Breeder components should be tested in a staged development culminating in a full-scale demonstration plant. The economic assessment depends on calculations of allowed and estimated capital costs of an Accelerator Breeder for a CANDU system operating on the Th-U fuel cycle. The results indicate that the ratio of estimated to allowed capital cost is approximately 3.5 for a breeder with a 2% enriched uranium metal blanket and for separated U235 valued at 48 $/g

  13. Staphylococcus agnetis, a potential pathogen in broiler breeders

    Poulsen, Louise Ladefoged; Thøfner, Ida; Bisgaard, Magne


    In this study, four broiler parent flocks have been followed from the onset of the production period (week 20) until slaughter (week 60). Every week, approximately ten dead broiler breeders, randomly selected among birds dead on their own, were collected and subjected to a full post mortem analysis...... including bacteriological examination. In total 997 breeders were investigated and for the first time Staphylococcus agnetis was isolated in pure culture from cases of endocarditis and septicemia from 16 broiler breeders. In addition, the cloacal flora from newly hatched chickens originating from the same...... from both broiler breeders and broilers. Three isolates were whole genome sequenced to obtain knowledge on virulence genes. The isolates harbored a number of genes encoding different fibrinogen binding proteins and toxins which might be important for virulence. The present findings demonstrate that S...

  14. Tritium breeders and tritium permeation barrier coatings for fusion reactor

    Yamawaki, Michio; Kawamura, Hiroshi; Tsuchiya, Kunihiko


    A state of R and D of tritium breeders and tritium permeation barrier coatings for fusion reactor is explained. A list of candidate for tritium breeders consists of ceramics containing lithium, for examples, Li 2 O, Li 2 TiO 3 , Li 2 ZrO 3 , Li 4 SiO 4 and LiAlO 2 . The characteristics and form are described. The optimum particle size is from 1 to 10 μm. The production technologies of tritium breeders in the world are stated. Characteristics of ceramics with lithium as tritium breeders are compared. TiC, TiN/TiC, Al 2 O 3 and Cr 2 O 3 -SiO 2 -P 2 O 5 are tritium permeation barrier coating materials. These production methods and evaluation of characteristics are explained. (S.Y.)

  15. Neutronic optimization of solid breeder blankets for STARFIRE design

    Gohar, Y.; Abdou, M.A.


    Extensive neutronic tradeoff studies were carried out to define and optimize the neutronic performance of the different solid breeder options for the STARFIRE blanket design. A set of criteria were employed to select the potential blanket materials. The basic criteria include the neutronic performance, tritium-release characteristics, material compatibility, and chemical stability. Three blanket options were analyzed. The first option is based on separate zones for each basic blanket function where the neutron multiplier is kept in a separate zone. The second option is a heterogeneous blanket type with two tritium breeder zones. In the first zone the tritium breeder is assembled in a neutron multiplier matrix behind the first wall while the second zone has a neutron moderator matrix instead of the neutron multiplier. The third blanket option is similar to the second concept except the tritium breeder and the neutron multiplier form a homogeneous mixture

  16. Plant dynamics and safety analysis of fast breeder reactors

    Ertel, V.


    Some general features of sodium cooled fast breeders which influence the thermohydraulics and differ from LWR'S are discussed. Using the SNR-300 as a reference, some thermohydraulic transients from normal operation and from design accidents are presented. (orig.)

  17. Overview of pool hydraulic design of Indian prototype fast breeder ...

    Flow sheet of prototype fast breeder reactor. ... over, the main vessel that houses radioactive primary sodium is free of any ..... with superficial velocity components in porous media. ..... The attenuation within thermal boundary layer was found.

  18. Status of the breeder fuel cycle in the United States

    Burch, W.D.


    This paper reviews the status and plans for the fast reactor fuel cycle in the United States. The United States is undertaking a complete reexamination of its entire breeder program strategy, and the direction of the new program is not yet clear. Studies in progress to examine the associated fuel cycle strategies as they relate to the overall emerging breeder strategy are described. The present status of and recent developments in the fuel cycle R and D programs are summarized

  19. Development of Liquid Type Breeder Technology for ITER-TBM

    Jung, Ki Sok; Hong, Bong Geun; Lee, Dong Won


    In relation to liquid type TBM technology development, various works are performed. We established a test loop concept to test the MHD effects and materials compatibility for the Pb-17Li breeder material. For the loop construction, electromagnetic pump and storage tank for the Pb-17Li loop was manufactured and some technical requirements are summarised. As a reference, technical literatures relevant to the liquid type TBM materials and the tritium extraction from breeder materials are also surveyed.

  20. Processing and waste disposal needs for fusion breeder blankets system

    Finn, P.A.; Vogler, S.


    We evaluated the waste disposal and recycling requirements for two types of fusion breeder blanket (solid and liquid). The goal was to determine if breeder blanket waste can be disposed of in shallow land burial, the least restrictive method under U.S. Nuclear Regulatory Commission regulations. Described in this paper are the radionuclides expected in fusion blanket materials, plans for reprocessing and disposal of blanket components, and estimates for the operating costs involved in waste disposal. (orig.)

  1. Growth rates of breeder reactor fuel. Final report

    Ott, K.O.


    During the contract period, a consistent formalism for the definition of the growth rates (and thus the doubling time) of breeder reactor fuel has been developed. This formalism was then extended to symbiotic operation of breeder and converter reactors. Further, an estimation prescription for the growth rate has been developed which is based upon the breeding worth factors. The characteristics of this definition have been investigated, which led to an additional integral concept, the breeding bonus

  2. Exploding the myths about the fast breeder reactor

    Burns, S.


    This paper discusses the facts and figures about the effects of conservation policies, the benefits of the Clinch River Breeder Reactor demonstration plant, the feasibility of nuclear weapons manufacture from reactor-grade plutonium, diversion of plutonium from nuclear plants, radioactive waste disposal, and the toxicity of plutonium. The paper concludes that the U.S. is not proceeding with a high confidence strategy for breeder development because of a variety of false assumptions.

  3. The development of the gas cooled fast breeder reactor

    Dalle Donne, M.; Kernforschungszentrum Karlsruhe


    A survey of the present technological state is given on the basis of the developments made so far. Some milestones of development - e.g. the German gas breeder memorandum, the Gas Breeder Reactor Association the results of the BR-2 radiation experiments and of GfK-KWU design and safety studies - are described. The problems connected with a large store of plutonium are also discussed. (UA/AK) [de

  4. Accelerator breeders, will they replace liquid metal fast breeders (question mark)

    Grand, P.; Powell, J.R.; Steinberg, M.; Takahashi, H.


    Advances in accelerator technology make accelerator breeding of fissile fuel more and more attractive. Brookhaven studies indicate that accelerator breeders could be implemented commercially within twenty years and that the resulting AB-LWR fuel cycle cost is competitive with that of the LMFBR. This cost competitiveness would be greatly enhanced with more advanced converters. Feasibility studies carried out at Brookhaven over the last few years addressed principally the question of neutronics and engineering feasibility of the target system, technical issues of accelerator technology and cost/benefit analysis

  5. Accelerator molten-salt breeder reactor

    Furukawa, Kazuo; Kuroi, Hideo; Kato, Yoshio; Oomichi, Toshihiko.


    Purpose: To obtain fission products and to transmute transuranium elements and other radioactive wastes by the use of Accelerator Molten-Salt Breeder Reactor. Constitution: Beams from an accelerator pipe at one end of a target vessel is injected through a window into target molten salts filled inside of the target vessel. The target molten salts are subjected to pump recycling or spontaneous convection while forcively cooled by blanket molten salts in an outer vessel. Then, energy is recovered from the blanket molten salts or the target molten salts at high temperatures through electric power generation or the like. Those salts containing such as thorium 232 and uranium 238 are used as the blanket molten salts so that fission products may be produced by neutrons generated in the target molten salts. PbCl 2 -PbF 2 and LiF-BeF 2 -ThF 4 can be used as the target molten salts and as the blanket molten salts respectively. (Seki, T.)

  6. Role of fast breeders in Japan

    Oyama, A.; Tomabechi, K.


    To meet increasing future energy demand in Japan utilization of fission energy should be promoted. In particular it is of vital importance to develop and utilize FBRs as soon as possible in order to save the natural uranium needed. If one considers the commercial introduction of FBRs in the mid-1990s in Japan, a delay of only one year will eventually result in an additional demand for natural uranium of more than 20,000 tons, because several LWRs will have to be installed instead. Ten years have passed since the development of FBRs in Japan was initiated as a national project with the highest priority and now the experimental fast reactor JOYO is successfully being operated at 50MW and the prototype fast breeder reactor MONJU has reached the stage of proceeding to construction with a schedule of operation in the mid-1980s. Following operation of MONJU, construction of a large demonstration reactor of 1000 - 15000 MW(e) will be undertaken. Some 2 - 3 years after the construction of the demonstration reactor, a series of reactors will be constructed similar in size and design to promote commercialization of LMFBRs. Strong efforts will be made to put this programme into practice. It is expected that LMFBRs will play an important role in mitigating the serious problem of energy supply in Japan foreseeable around the turn of the century

  7. Breeder reactor program in the USA

    Brewer, S.


    In the United States, commercial fuel reprocessing and demonstration test of plutonium breeder reactors were now postponed. LMFBR project and schedule of FFTF and afterwards await the results of INFCE. However, this is not discarding the development of LMFBRs. With the existing energy resources, the United States can have the opportunity to make careful and thorough study. Emphasis is placed on the research and development on new alternative types of fuel. FFTF going to be operated soon should provide effective means for the developments of FBR fuel and materials. High priority is to be retained for the test and development of sodium system hardwares. The nuclear proliferation problem is not related to heat transfer and secondary systems; it is associated with the selection of fuel and fuel cycle. The whole program is centered around LMFBR design and development. The target output will be 600 x 10 3 -- 700 x 10 3 MW. In the United States, now is the time to develop excellent products and to study the nuclear proliferation problem more carefully. (Mori, K.)

  8. Liquid metal tribology in fast breeder reactors

    Wild, E.; Mack, K.J.; Gegenheimer, M.


    Liquid Metal Cooled Fast Breeder Reactors (LMFBR) require mechanisms operating in various sodium liquid and sodium vapor environments for extended periods of time up to temperatures of 900 K under different chemical properties of the fluid. The design of tribological systems in those reactors cannot be based on data and past experience of so-called conventional tribology. Although basic tribological phenomena and their scientific interpretation apply in this field, operating conditions specific to nuclear reactors and prevailing especially in the nuclear part of such facilities pose special problems. Therefore, in the framework of the R and D-program accompanying the construction phase of SNR 300 experiments were carried out to provide data and knowledge necessary for the lay-out of friction systems between mating surfaces of contacting components. Initially, screening tests isolated material pairs with good slipping properties and maximum wear resistance. Those materials were subjected to comprehensive parameter investigations. A multitude of laboratory scale tests have been performed under largely reactor specific conditions. Unusual superimpositions of parameters were analyzed and separated to find their individual influence on the friction process. The results of these experiments were made available to the reactor industry as well as to factories producing special tribo-materials. (orig.) [de

  9. The future of the Fast Breeder

    Lefevre, J.C.


    Fast Breeder Reactors (FBRs) can produce more fissile nuclei than they consume whilst, at the same time, generating energy using fast neutrons. By conversion of uranium isotope 238 into a fissionable fuel, FBRs provide over 60 times more energy than can be extracted from the uranium reserves by thermal reactors. Their development is therefore an essential objective in the next century, particularly for those industrialised countries that have little or no energy resources of their own. The European countries which have been engaged in the development of FBRs for more than 25 years have decided to collaborate in an advanced design, the European Fast Reactor (EFR) which uses the best of previous national projects and draws on extensive operating experience from FBR plants in Europe. The naturally safe characteristics and technological features of sodium-cooled Fast Reactors will be fully utilised in an EFR design which meets the same safety level as the Light Water Reactors (LWRs). Owing to technical progress and series construction effect, the EFR is expected to achieve competitiveness with contemporary LWRs with the higher capital cost of the Fast Reactor offset by its markedly lower fuel cycle cost. (author)

  10. Preliminary design of a Binary Breeder Reactor

    Garcia C, E. Y.; Francois, J. L.; Lopez S, R. C.


    A binary breeder reactor (BBR) is a reactor that by means of the transmutation and fission process can operates through the depleted uranium burning with a small quantity of fissile material. The advantages of a BBR with relation to other nuclear reactor types are numerous, taking into account their capacity to operate for a long time without requiring fuel reload or re-arrangement. In this work four different simulations are shown carried out with the MCNPX code with libraries Jeff-3.1 to 1200 K. The objective of this study is to compare two different models of BBR: a spherical reactor and a cylindrical one, using two fuel cycles for each one of them (U-Pu and Th-U) and different reflectors for the two different geometries. For all the models a super-criticality state was obtained at least 10.9 years without carrying out some fuel re-arrangement or reload. The plutonium-239 production was achieved in the models where natural uranium was used in the breeding area, while the production of uranium-233 was observed in the cases where thorium was used in the fertile area. Finally, a behavior of stationary wave reactor was observed inside the models of spherical reactor when contemplating the power uniform increment in the breeding area, while inside the cylindrical models was observed the behavior of a traveling wave reactor when registering the displacement of the burnt wave along the cylindrical model. (Author)

  11. Lithium mass transport in ceramic breeder materials

    Blackburn, P.E.; Johnson, C.E.


    The objective of this activity is to measure the lithium vaporization from lithium oxide breeder material under differing temperature and moisture partial pressure conditions. Lithium ceramics are being investigated for use as tritium breeding materials. The lithium is readily converted to tritium after reacting with a neutron. With the addition of 1000 ppM H 2 to the He purge gas, the bred tritium is readily recovered from the blanket as HT and HTO above 400 degree C. Within the solid, tritium may also be found as LiOT which may transport lithium to cooler parts of the blanket. The pressure of LiOT(g), HTO(g), or T 2 O(g) above Li 2 O(s) is the same as that for reactions involving hydrogen. In our experiments we were limited to the use of hydrogen. The purpose of this work is to investigate the transport of LiOH(g) from the blanket material. 8 refs., 1 fig., 3 tabs

  12. Fusion breeder: its potential role and prospects

    Lee, J.D.


    The fusion breeder is a concept that utilizes 14 MeV neutrons from D + T → n(14.1 MeV) + α(3.5 MeV) fusion reactions to produce more fuel than the tritium (T) needed to sustain the fusion process. This excess fuel production capacity is used to produce fissile material (Pu-239 or U-233) for subsequent use in fission reactors. We are concentrating on a class of blankets we call fission suppressed. The blanket is the region surrounding the fusion plasma in which fusion neutrons interact to produce fuel and heat. The fission-suppressed blanket uses non-fission reactions (mainly (n,2n) or (n,n't)) to generate excess neutrons for the production of net fuel. This is in contrast to the fast fission class of blankets which use (n,fiss) reactions to generate excess neutrons. Fusion reactors with fast fission blankets are commony known as fusion-fission hybrids because they combine fusion and fission in the same device

  13. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    Anja B. Riber


    Full Text Available Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene, or that has too many economic or practical constraints will never be implemented on commercial farms and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places, cover panels, and substrate (for broiler breeders housed in cage systems. However, most of the ideas for environmental enrichment for broiler breeders need to be further developed and studied with respect to the use, the effect on behavior and welfare, and the interaction with genotype and production system. In addition, information on practical use and the economics of the production system is often lacking although it is important for application in practice.

  14. French-Soviet experiments ARAKS: main results

    Lavergnat, J.


    The objective of the French-Soviet ARAKS experiments (Artificial Radiation and Aurora between Kerguelen and the Soviet Union) was to study the injection of an electron beam in the ionospheric plasma. Two rockets were launched which were magnetically conjugated with a point on the ground, and many ground-based measurement facilities were set up in conjunction with these experiments, with emphasis on radar measurements in the Northern Hemisphere as well as on the VLH and VHF measurements in both hemispheres. One of the important results of the experiments is that they have demonstrated the possibility of detecting the ionization trails created by the beam penetrating the conjugate atmosphere by ground-based radar observations. The observations discussed include those related to neutralization of the electron gun and wave emission. 6 references

  15. Nuclear power in the Soviet Bloc

    Davey, W.G.


    The growth of Soviet Bloc nuclear power generation to the end of the century is evaluated on the basis of policy statements of objectives, past and current nuclear power plant construction, and trends in the potential for future construction. Central to this study is a detailed examination of individual reactor construction and site development that provides specific performance data not given elsewhere. A major commitment to nuclear power is abundantly clear and an expansion of ten times in nuclear electric generation is estimated between 1980 and 2000. This rate of growth is likely to have significant impact upon the total energy economy of the Soviet Bloc including lessening demands for use of coal, oil, and gas for electricity generation

  16. Nuclear power in the Soviet Bloc

    Davey, W.G.


    The growth of Soviet Bloc nuclear power generation to the end of the century is evaluated on the basis of policy statements of objectives, past and current nuclear power plant construction, and trends in the potential for future construction. Central to this study is a detailed examination of individual reactor construction and site development that provides specific performance data not given elsewhere. A major commitment to nuclear power is abundantly clear and an expansion of ten times in nuclear electric generation is estimated between 1980 and 2000. This rate of growth is likely to have significant impact upon the total energy economy of the Soviet Bloc including lessening demands for use of coal, oil, and gas for electricity generation.

  17. Citizenship struggles in Soviet successor states.

    Brubaker, W R


    "The breakup of the Soviet Union has transformed yesterday's internal migrants, secure in their Soviet citizenship, into today's international migrants of contested legitimacy and uncertain membership. This transformation has touched Russians in particular, of whom some 25 million live in non-Russian successor states. This article examines the politics of citizenship vis-a-vis Russian immigrants in the successor states, focusing on the Baltic states, where citizenship has been a matter of sustained and heated controversy." The author concludes that "formal citizenship cannot be divorced from broader questions of substantive belonging. Successor states' willingness to accept Russian immigrants as citizens, and immigrants' readiness to adopt a new state as their state, will depend on the terms of membership for national minorities and the organization of public life in the successor states." Data are from a variety of published sources. excerpt

  18. Status of fast breeder reactor development in the United States

    Rosen, S


    This document was prepared by the Office of the Program Director for Nuclear Energy, U.S. Department of Energy (USDOE). It sets forth the status and current activities for the development of fast breeder technology in the United States. In April 1977 the United States announced a change in its nuclear energy policy. Concern about the potential for the proliferation of nuclear weapons capability emerged as a major issue in considering whether to proceed with the development, demonstration and eventual deployment of breeder reactor energy systems. Plutonium recycle and the commercialization of the fast breeder were deferred indefinitely. This led to a reorientation of the nuclear fuel cycle program which was previously directed toward the commercialization of fuel reprocessing and plutonium recycle to the investigation of a full range of alternative fuel cycle technologies. Two major system evaluation programs, the Nonproliferation Alternative Systems Assessment Program (NASAP), which is domestic, and the International Nuclear Fuel Cycle Evaluation (INFCE), which is international, are assessing the nonproliferation advantages and other characteristics of advanced reactor concepts and fuel cycles. These evaluations will allow a decision in 1981 on the future direction of the breeder program. In the interim, the technologies of two fast breeder reactor concepts are being developed: the Liquid Metal Fast Breeder Reactor (LMFBR) and the Gas Cooled Fast Reactor (CFR). The principal goals of the fast breeder program are: LMFBR - through a strong R and D program, consistent with US nonproliferation objectives and anticipated national electric energy requirements, maintain the capability to commit to a breeder option; investigate alternative fuels and fuel cycles that might offer nonproliferation advantages; GCFR - provide a viable alternative to the LMFBR that will be consistent with the developing U.S. nonproliferation policy; provide GCFR technology and other needed

  19. JPRS Report Soviet Union Political Affairs.


    gentsia, specialists, authoritative workers and kolkhoz farmers in on their deliberations. A soviet of primary party organization secretaries...are in favor of disassembling the authoritarian , bureaucratic system and for focusing on humane, democratic socialism, the forming of a state under...Iolota’nskiy Rayon in Turkmenistan a boarding home for mentally retarded children. Some end up here directly from maternity homes, others are brought by

  20. US - Former Soviet Union environmental management activities



    The Office of Environmental Management (EM) has been delegated the responsibility for US DOE`s cleanup of nuclear weapons complex. The nature and the magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. This booklet makes comparisons and describes coordinated projects and workshops between the USA and the former Soviet Union.

  1. The Soviet Decision to Invade Czechoslovakia


    inuary 1976 DDC - ’■’ rv > Canoron Station O T "> 1 ." Mexancria The caveat appearing on the title pi c.r. ol: Center for hib- avanced^earch...Soviets viewed the political developments in Czechoslovakia in 1968 with alarm bordering on paranoia, conditioned by the "dagger" phobia and by...published its Action Program entitled "The Czechoslovak Road to Socialism ," a program described by a Western authority as "a remarkable

  2. JPRS Report, Soviet Union, Economic Affairs


    balance. It is well known that V. I. Lenin considered inflation the worse type of taxation . If we talk about the possible methods of normalizing the...INDUSTRIYA in Russian 12 Aug 88 p 1 [Article by V. Shishkin, member, Soviet Association of Political Sciences and candidate of juridical sciences, under...achievements as the results of extravagant spending and double counting. The ruinous nature of the gross output criteria was exposed by using

  3. Animal Effects from Soviet Atmospheric Nuclear Tests


    describes the effect on animal models of atmospheric nuclear weapons tests performed by the Soviet Union at the Semipalatinsk Test Site . Part I describes...understand the pathogenic mechanisms of injury and the likelihood of efficacy of proposed treatment measures. 15. SUBJECT TERMS Semipalatinsk Test Site ...the Semipalatinsk Test Site . Part 1 describes the air blast and thermal radiation effects. Part 2 covers the effects of primary (prompt) radiation and

  4. JPRS Report, Soviet Union, International Affairs.


    socialist soci- ety. Perestroyka is not a deviation, but a new step forward in the development of socialism. This means that the whole policy is in the...anniversary of the Great October, that the restructuring is moving forward . The Soviet people is interested in this process and actively supports it...WASHINGTON POST, 3 March 1986. 4. EL FINANCIERO , Mexico, 28 May 1986. 5. THE FINANCIAL TIMES, London, 11 June 1986. 6. See VISION, Mexico, Vol 67, No 5

  5. JPRS Report Soviet Union Political Affairs.


    the right of immunity and can be removed from his post only by the Azerbaijan SSR Supreme Soviet in case of a violation by him of the constitution...ities of judges and people’s assessors and their execution of justice is inadmissible and is punishable by law. The immunity of judges and people’s...ecologically clean water to be sold in bottles and cardboard containers- -like kefir . Understandably, this beverage will cost more than tap water, but is

  6. JPRS Report, Soviet Union, Political Affairs.


    Kherson ship builder, the conscientious and docile Poltava or Podillya grain and cattle farmer, the dweller of the coastline of the dying Black Sea...even for free. The best crops of fields, gardens and orchards, the largest herds of cattle not only fail to improve, but consistently worsen the...the Soviet people"—in fact, the spiritual castration of non- Russians. We do not consider that a Ukrainian who speaks Russian automatically loses

  7. Synchrotron radiation sources in the Soviet Union

    Kapitza, S.P.


    Synchrotron radiation (SR) is now recognized to be an important instrument for experimental work in many fields of science. Recently the application of SR in medicine and industry, especially as a light source for microelectronics production have been demonstrated. Thus the development of SR sources has now grown to become a significant and independent dimension for accelerator research and technology. This article describes SR work in the Soviet Union

  8. Soviet Tactical Doctrine for Urban Warfare


    Soviet Area Specialist. Valuable assistance was provided by Mr. Gerald Sullivan and LTC Ray N. Franklin, USMC, of the Advanced Research Projects... Oldenburg 120.8 133.3 12.5 10 Osnabruck 133.6 164.0 30.4 23 Regensburg 123.0 133.5 10.5 9 Remacheid 123.0 135.5 12.5 10 Salzgitter 105.9 117.6 11.7

  9. Nuclear safety cooperation for Soviet designed reactors

    Reisman, A.W.; Horak, W.C.


    The nuclear accident at the Chernobyl nuclear power plant in 1986 first alerted the West to the significant safety risks of Soviet designed reactors. Five years later, this concern was reaffirmed when the IAEA, as a result of a review by an international team of nuclear safety experts, announced that it did not believe the Kozloduy nuclear power plants in Bulgaria could be operated safely. To address these safety concerns, the G-7 summit in Munich in July 1992 outlined a five point program to address the safety problems of Soviet Designed Reactors: operational safety improvement; near-term technical improvements to plants based on safety assessment; enhancing regulatory regimes; examination of the scope for replacing less safe plants by the development of alternative energy sources and the more efficient use of energy; and upgrading of the plants of more recent design. As of early 1994, over 20 countries and international organizations have pledged hundreds of millions of dollars in financial assistance to improve safety. This paper summarizes these assistance efforts for Soviet designed reactors, draws lessons learned from these activities, and offers some options for better addressing these concerns

  10. Soviet medical ethics (1917-1991).

    Lichterman, Boleslav L


    Russian medical ethics bears a heavy mark of seven decades of the communist regime. In 1918 the Health Care Commissariat (ministry) was formed. It was headed by Nikolai Semashko (1874-1949) who claimed that "the ethics of the Soviet physician is an ethics of our socialist motherland, an ethics of a builder of communist society; it is equal to communist moral". "Medical ethics" had been avoided until the late 1930s when it was replaced by "medical (or surgical) deontology". This "deontological" period started with "Problems of surgical deontology" written by N. Petrov, a surgeon, and lasted for almost half a century until "medical deontology" was abandoned in favor of "bioethics" in post-communist Russia. There have been five All-Union conferences on medical deontology since 1969. The story of the emergence of "The Oath of a Soviet Physician" is briefly described. The text of this Oath was approved by a special decree of the Soviet Parliament in 1971. Each graduate of medical school in USSR was obliged to take this Oath when receiving his or her medical diploma. It is concluded that such ideas of zemstvo medicine as universal access to health care and condemnation of private practice were put into practice under the communist regime.

  11. Cogeneration in the former Soviet Union

    Horak, W.C.


    The former Soviet Union made a major commitment to Cogeneration. The scale and nature of this commitment created a system conceptually different from Cogeneration in the west. The differences were both in scale, in political commitment, and in socio economic impact. This paper addresses some of the largest scale Cogeneration programs, the technology, and the residual impact of these programs. The integration of the Cogeneration and nuclear programs is a key focus of the paper. Soviet designed nuclear power plants were designed to produce both electricity and heat for residential and industrial uses. Energy systems used to implement this design approach are discussed. The significant dependence on these units for heat created an urgent need for continued operation during the winter. Electricity and heat are also produced in nuclear weapons production facilities, as well as power plants. The Soviets also had designed, and initiated construction of a number of nuclear power plants open-quotes ATETsclose quotes optimized for production of heat as well as electricity. These were canceled

  12. The image of women in Soviet Manifesto

    Mirko Orabona


    Full Text Available This article summarizes the condition of women within the Bolshevik regime, focusing on the use of posters. Visual propaganda was a means to easily reach wide strata of the population. The official Party ideology, expressed through visual propaganda, contributed to the definition of new social identities, as well as to the creation of new ways of thinking and acting in Soviet society. It had its own internal dynamics and operated as an independent force in a continually evolving society in which the field of discourse was radically changing. Posters aticipated developments in Soviet society and provided a model for people to follow; they were not limited to reflecting past or current events. The posters under consideretion pertain to the representation of women in their various occupations (e.g, workers, peasants or simply happily engaged in everyday life. The images prescribed, for example, which clothes to wear or how hair should be styled, and were without doubt powerful and pervasive; yet they were destined to meet an inevitable decline following Stalin's death, when the Soviet Union reprised its international relations.

  13. Soviet Robots in the Solar System Mission Technologies and Discoveries

    Huntress, JR , Wesley T


    The Soviet robotic space exploration program began in a spirit of bold adventure and technical genius. It ended after the fall of the Soviet Union and the failure of its last mission to Mars in 1996. Soviet Robots in the Solar System chronicles the scientific and engineering accomplishments of this enterprise from its infancy to its demise. Each flight campaign is set into context of national politics and international competition with the United States. Together with its many detailed illustrations and images, Soviet Robots in the Solar System presents the most detailed technical description of Soviet robotic space flights provides a unique insight into programmatic, engineering, and scientific issues covers mission objectives, spacecraft engineering, flight details, scientific payload and results describes in technical depth Soviet lunar and planetary probes

  14. Loose Soviet nukes: A mountain or a molehill?

    Morrison, D.C.


    For almost four decades, US national security alarmists have tossed and turned in the night fretting about the atomic plots that might be hatching behind the Kremlin's impenetrable walls. A secretly deployed antimissile shield? An unanswerable first strike? When Cold War fevers were spiking, no Soviet action was too dire to ponder. Now that the Cold War has been declared over and won, ironically, the focus of US concern has shifted to a new danger that has nothing to do with deliberate Soviet schemes. Rather, as Secretary of Defense Dick Cheney suggested in February 7 remarks to the House Armed Services Committee, the collapse of central authority in the Soviet Union means that the greatest threat to the neighbors of the Soviet Union in the future may well come more from the Soviet inability to control events inside the Soviet Union than it will from any conscious policy of seeking to expand their influence by military means

  15. Fast breeder physics and nuclear core design

    Marth, W.; Schroeder, R.


    This report gathers the papers that have been presented on January 18/19, 1983 at a seminar ''Fast breeder physics and nuclear core design'' held at KfK. These papers cover the results obtained within about the last five years in the r+d program and give some indication, what still has to be done. To begin with, the ''tools'' of the core designer, i.e. nuclear data and neutronics codes are covered in a comprehensive way, the seminar emphasized the applications, however. First of all the accuracies obtained for the most important parameters are presented for the design of homogeneous and heterogeneous cores of about 1000 MWe, they are based on the results of critical experiments. This is followed by a survey on activities related to the KNK II reactor, i.e. calculations concerning a modification of the core as well as critical experiments done with respect to re-loads. Finally, work concerning reactivity worths of accident configurations is presented: the generation of reactivity worths for the input of safety-related calculations of a SNR 2 design, and critical experiments to investigate the requirements for the codes to be used for these calculations. These papers are accompanied by two contributions from the industrial partners. The first one deals with the requirements to nuclear design methods as seen by the reactor designer and then shows what has been achieved. The latter one presents state, trends, and methods of the SNR 2 design. The concluding remarks compare the state of the art reached within DeBeNe with international achievements. (orig.) [de

  16. Status of the solid breeder materials database

    Billone, M.C.; Dienst, W.; Lorenzetto, P.; Noda, K.; Roux, N.


    The databases for solid breeder ceramics (Li 2 O, Li 4 SiO 4 , Li 2 ZrO 3 , and LiAlO 2 ) and beryllium multiplier material were critically reviewed and evaluated as part of the ITER/CDA design effort (1988-1990). The results have been documented in a detailed technical report. Emphasis was placed on the physical, thermal, mechanical, chemical stability/compatibility, tritium retention/release, and radiation stability properties which are needed to assess the performance of these materials in a fusion reactor environment. Materials properties correlations were selected for use in design analysis, and ranges for input parameters (e.g., temperature, porosity, etc.) were established. Also, areas for future research and development in blanket materials technology were highlighted and prioritized. For Li 2 O, the most significant increase in the database has come in the area of tritium retention as a function of operating temperature and purge flow composition. The database for postirradiation inventory from purged in-reactor samples has increased from four points to 20 points. These new data have allowed an improvement in understanding and modeling, as well as better interpretation of the results of laboratory annealing studies on unirradiated and irradiated material. In the case of Li 2 ZrO 3 , relatively little data were available on the sensitivity of the mechanical properties of this ternary ceramic to microstructure and moisture content. The increase in the database for this material has allowed not only better characterization of its properties, but also optimization of fabrication parameters to improve its performance. Some additional data are also available for the other two ternary ceramics to aid in the characterization of their performance. In particular, the thermal performance of these materials, as well as beryllium, in packed-bed form has been measured and characterized

  17. Status of fast breeder development in Germany

    Heusener, G.


    The German Minister for Research and Technology (BMFT), Dr. Heinz Riesenhuber, announced on March 20, 1991 that SNR 300, the fast breeder power plant at Kalkar, shall be abandoned. This message followed a top level meeting between BMFT officials and senior managers of Siemens, RWE, PreuBenElektra und Bayernwerk. BMFT, vendor Siemens and the three utilities had carried the interim finance costs of DM 105 million yearly since 1989. The licensing procedure had been obstructed during a long time by the responsible authorities. For several years the licensing process for the last permits on nuclear operation of KKW Kalkar had been held up by the government of the state of North Rhine-Westphalia (NWR). Licensing of nuclear power plants is the responsibility of the states, according to the German Atomic Act. The state of NRW turned against the SNR 300 project when the Social Democratic Party (SPD) started questioning nuclear power in 1985. Until then 17 partial licenses for SNR 300 had been granted, each time including an overall project approval. One of the consequences of the demise of SNR-300 was that Interatom GmbH, a subsidiary of Siemens AG, has been integrated into the division KWU of the Siemens AG on 1 October, 1991. For SNR 300 the turn-key contracts to the supplier company were cancelled by the operator on April 10, 1991 following the political termination of the SNR-300 Project. On August 23, 1991 after the termination of the SNR project, KfK decided to shutdown the KNK II reactor for final decommissioning

  18. Status of fast breeder development in Germany

    Heusener, G [Kernforschungszentrum Karlsruhe, Karlsruhe (Germany)


    The German Minister for Research and Technology (BMFT), Dr. Heinz Riesenhuber, announced on March 20, 1991 that SNR 300, the fast breeder power plant at Kalkar, shall be abandoned. This message followed a top level meeting between BMFT officials and senior managers of Siemens, RWE, PreuBenElektra und Bayernwerk. BMFT, vendor Siemens and the three utilities had carried the interim finance costs of DM 105 million yearly since 1989. The licensing procedure had been obstructed during a long time by the responsible authorities. For several years the licensing process for the last permits on nuclear operation of KKW Kalkar had been held up by the government of the state of North Rhine-Westphalia (NWR). Licensing of nuclear power plants is the responsibility of the states, according to the German Atomic Act. The state of NRW turned against the SNR 300 project when the Social Democratic Party (SPD) started questioning nuclear power in 1985. Until then 17 partial licenses for SNR 300 had been granted, each time including an overall project approval. One of the consequences of the demise of SNR-300 was that Interatom GmbH, a subsidiary of Siemens AG, has been integrated into the division KWU of the Siemens AG on 1 October, 1991. For SNR 300 the turn-key contracts to the supplier company were cancelled by the operator on April 10, 1991 following the political termination of the SNR-300 Project. On August 23, 1991 after the termination of the SNR project, KfK decided to shutdown the KNK II reactor for final decommissioning.

  19. Liquid metal cooled fast breeder nuclear reactors

    Durston, J.G.


    It is stated that in a liquid metal cooled fast breeder reactor wherein the core, intermediate heat exchangers and liquid metal pumps are immersed in a pool of coolant such as Na, the intermediate heat exchangers are suspended from the roof, and ducting is provided in the form of a core tank or shroud interconnected with 'pods' housing the intermediate exchangers for directing coolant from the core over the heat exchanger tubes and thence back to the main pool of liquid metal. Seals are provided between the intermediate heat exchanger shells and the walls of their 'pods' to prevent liquid metal flow by-passing the heat exchanger tube bundles. As the heat exchangers must be withdrawable for servicing, and because linear differential thermal expansion of the heat exchanger and its 'pod' must be accommodated the seals hitherto have been of the sliding kind, generally known as 'piston ring type seals'. These present several disadvantages; for example sealing is not absolute, and the metal to metal seal gives rise to wear and fretting by rubbing and vibration. This could lead to seizure or jamming by the deposition of impurities in the coolant. Another difficulty arises in the need to accommodate lateral thermal expansion of the ducting, including the core tank and 'pods'. Hitherto some expansion has been allowed for by the use of expansible bellow pairs in the interconnections, or alternatively by allowing local deformations of the core tank 'pods'. Such bellows must be very flexible and hence constitute a weak section of the ducting, and local deformations give rise to high stress levels that could lead to premature failure. The arrangement described seeks to overcome these difficulties by use of a gas pocket trapping means to effect a seal against vertical liquid flow between the heat exchanger shell and the wall of the heat exchanger housing. Full details of the arrangement are described. (U.K.)

  20. The Tenth Period of Soviet Third World Policy


    All its activity is taking place in an atmosphere of responsible criticism and self-criticism and of observance of the principle of looking the truth...tremendous stability to the Soviet-Indian relationship. Moscow’s ties with New Dehli have lasted now well over thirty years. Moscow can be confident...itself a superpower with global interests and commitments. The costs of the Soviet empire may be onerous at the margin when Soviet economic managers

  1. Effect of vaccinating breeder chickens with a killed Salmonella vaccine on Salmonella prevalences and loads in breeder and broiler chicken flocks.

    Berghaus, R D; Thayer, S G; Maurer, J J; Hofacre, C L


    The objective of this study was to evaluate the effect of vaccination of breeder chickens on Salmonella prevalences and loads in breeder and broiler chicken flocks. Chickens housed on six commercial breeder farms were vaccinated with a killed Salmonella vaccine containing Salmonella Typhimurium, Salmonella Enteritidis, and Salmonella Kentucky. Unvaccinated breeders placed on six additional farms served as controls. Eggs from vaccinated and unvaccinated breeder flocks were kept separately in the hatchery, and the resulting chicks were used to populate 58 commercial broiler flock houses by using a pair-matched design. Vaccinated breeder flocks had significantly higher Salmonella-specific antibody titers than did the unvaccinated breeder flocks, although they did not differ significantly with respect to environmental Salmonella prevalences or loads. Broiler flocks that were the progeny of vaccinated breeders had significantly lower Salmonella prevalences and loads than broiler flocks that were the progeny of unvaccinated breeders. After adjusting for sample type and clustering at the farm level, the odds of detecting Salmonella in samples collected from broiler flocks originating from vaccinated breeders were 62% lower (odds ratio [95% confidence interval] = 0.38 [0.21, 0.68]) than in flocks from unvaccinated breeders. In addition, the mean load of culture-positive samples was lower in broilers from vaccinated breeders by 0.30 log most probable number per sample (95% confidence interval of -0.51, -0.09; P = 0.004), corresponding to a 50% decrease in Salmonella loads. In summary, vaccination of broiler breeder pullets increased humoral immunity in the breeders and reduced Salmonella prevalences and loads in their broiler progeny, but did not significantly decrease Salmonella in the breeder farm environment.

  2. Soviet/Russian-American space cooperation

    Karash, Yuri Y.

    This dissertation seeks to answer two questions: (1) what are the necessary conditions for the emergence of meaningful space cooperation between Russia and the United States, and (2) might this cooperation continue developing on its own merit, contributing to the further rapprochement between the two countries, even if the conditions that originated the cooperation were to change? The study examines the entire space era up to this point, 1957 to 1997, from the first satellite launch through the joint U.S.-Russian work on the ISS project. It focuses on the analysis of three distinct periods of possible and real cooperation between the United States and the Soviet Union/Russia. The first possibility for a limited Soviet-American cooperation in space emerged in the late 1950s, together with the space age, and continued until the mid-1960s. The major potential joint project of this period was a human expedition to the Moon. The global competition/confrontation between the two countries prevented actual cooperation. The second period was from the late 1960s until 1985 with consideration of experimental docking missions, including the docking of a reusable U.S. shuttle to a Soviet Salyut-type station. The global U.S.-Soviet competition still continued, but the confrontation was replaced by detente for a brief period of time lasting from the end of 1960s until mid-1970s. Detente gave the first example of U.S.-Soviet cooperation in space---the Apollo-Soyuz joint space flight (ASTP) which took place in 1975. However, the lack of interest of political leaderships in continuation of broad-scale cooperation between the two countries, and the end of detente, removed ASTP-like projects out of question at least until 1985. The third period started together with Mikhail Gorbachev's Perestroika in 1985 and continues until now. It involves almost a hundred of joint space projects both at the governmental and at the private sectors levels. The mainstream of the joint activities

  3. Soviet space nuclear reactor incidents - Perception versus reality

    Bennett, Gary L.


    Since the Soviet Union reportedly began flying nuclear power sources in 1965 it has had four publicly known accidents involving space reactors, two publicly known accidents involving radioisotope power sources and one close call with a space reactor (Cosmos 1900). The reactor accidents, particularly Cosmos 954 and Cosmos 1402, indicated that the Soviets had adopted burnup as their reentry philosophy which is consistent with the U.S. philosophy from the 1960s and 1970s. While quantitative risk analyses have shown that the Soviet accidents have not posed a serious risk to the world's population, concerns still remain about Soviet space nuclear safety practices.

  4. Le realizzazioni dell'economia sovietica. (Soviet economic performance



    Full Text Available While in the 1950s Soviet output grew faster than most other industrial countries, the early 1960s has seen a noticeable slowing down in growth. The present paper puts these economic developments into perspective to judge the efficacy of Soviet policy in its attempt to achieve maximum growth and transform an underdeveloped into a developed country. The author first assesses Soviet performance and policy at different stages of development, before assessing the level attained. The purposes for which output is used and the major factors responsible for Soviet performance are then analysed. Finally, likely future developments are considered.JEL: P27, O40

  5. Soviet experience with peaceful uses of nuclear explosions

    Nordyke, M.D.


    The Soviet Union is pursuing an active program for developing peaceful uses of nuclear explosions (PNE). They have reported 16 explosions, with applications ranging from putting out oil-well fires and stimulating oil recovery to creating instant dams and canals. The data reported generally agree with U.S. experience. Seismic data collected by western sources on explosions outside the known Soviet test sites indicate that the Soviet program is at least twice as large as they have reported. The accelerated pace of these events suggests that in some applications the Soviet PNE program is approaching routine industrial technology

  6. 3-D Soviet Style: A Presentation on Lessons Learned from the Soviet Experience in Afghanistan


    auteurs se penchent sur les aspects stratégiques, opérationnels et tactiques de l’action soviétique. L’étude se fonde sur de l’information actualisée...publiée en russe et en anglais. Les données statistiques sur le conflit ont également été prises en compte. Les auteurs , MM. Anton Minkov et...communication and to the efforts the Soviets made in building Afghan security forces. It includes information on the theory and practice of Soviet

  7. The politics of Soviet strategic defense: Political strategies, organization politics, and Soviet strategic thought. (Volumes I and II)

    Kaufman, S.J.


    This study formulates three different unitary rational-actor models and an organizational model that can be used to explain Soviet policy in strategic defense from 1966-1980, then tests the models to determine which most successfully explains Soviet behavior. The only rational-actor model that can explain the Soviet force posture for air defense relies on demonstrably false assumptions. A well-formulated organizational model can explain these facts, as well as some organizational pathologies shown by the Soviet National Air Defense Forces. The findings suggest that military services, even when ostensibly closely directed by civilian and military superiors, often manage to pursue their own interests rather than the requirements of higher policy. Soviet civilian leaders generally had limited control over the formulation of military doctrine or over the force posture of Soviet military services, but arms control (especially the ABM Treaty) offered a policy handle which helped them to affect doctrine and force posture to a substantial degree

  8. Soviet theories of economic demography: a survey.

    Gregory, P


    At this time Soviet demographic scientists maintain the position that population problems may in fact exist temporarily under socialism but that the planning principle will allow society to resolve population problems, through the use of the administrative, moral, and economic levers (subsidies, government policies, propaganda, education) emphasized by Urlanis (1974) and others. For planners to deal effectively with population management, the determinants of fertility and labor force participation must be established. The foundations of Soviet theories of human capital and fertility were laid by several writers. For the sake of simplicity, these are referred to as the Urlanis-Strumilin model, named after 2 pioneer researchers in Soviet demography and manpower economics. The formulations are based upon the writings of Strumlin (1964) and Urlanis (1974), supplemented by writings of numerous other Soviet researchers. Although their models avoid neoclassical terms such as marginal utility and income and price elasticities, they clearly employ these concepts. The Urlanis-Strumilin model, reduced to its basic elements, is a direct household utility maximizing model. The husband and wife, the household decision makers, must select optimal levels of child "quantity," child "quality," leisure, their own human capital (further education and training), and other goods. The Soviet theory recognizes that an increase in household income will increase relatively the demands for income elastic goods. The model postulates that the demand for child quality is inversely related to the price of children. The price of children is the opportunity cost of children, the major element of which is the income foregone by the mother in the course of childbearing and childrearing. The child quantity demand schedule has elastic and inelastic portions. The marginal utility of the 1st child is great. The marginal utilities of higher order children decline substantially. Families with at least 1

  9. Comparison of inventory of tritium in various ceramic breeder blankets

    Nishikawa, M.; Beloglazov, S.; Nakashima, N.; Hashimoto, K.; Enoeda, M.


    It has been pointed out by the present authors that it is essential to understand such mass transfer steps as diffusion of tritium in the grain of breeder material, absorption of water vapor into bulk of the grain, and adsorption of water on surface of the grain, together with the isotope exchange reaction between hydrogen in purge gas and tritium on surface of breeder material and the isotope exchange reaction between water vapor in purge gas and tritium on surface, for estimation of the tritium inventory in a uniform ceramic breeder blanket under the steady-state condition. It has been also pointed out by the present authors that the water formation reaction on the surface of ceramic breeder materials at introduction of hydrogen can give effect on behavior of bred tritium and lithium transfer in blanket. The tritium inventory for various ceramic breeder blankets are compared in this study basing on adsorption capacity, absorption capacity, isotope exchange capacity, and isotope exchange reactions on the Li 2 O, LiAlO 2 , Li 2 ZrO 3 , Li 4 SiO 4 and Li 2 TiO 3 surface experimentally obtained by the present authors. Effect of each mass transfer steps on the shape of release curve of bred tritium at change of the operational conditions is also discussed from the observation at out pile experiment in KUR. (orig.)

  10. Optimal reactor strategy for commercializing fast breeder reactors

    Yamaji, Kenji; Nagano, Koji


    In this paper, a fuel cycle optimization model developed for analyzing the condition of selecting fast breeder reactors in the optimal reactor strategy is described. By dividing the period of planning, 1966-2055, into nine ten-year periods, the model was formulated as a compact linear programming model. With the model, the best mix of reactor types as well as the optimal timing of reprocessing spent fuel from LWRs to minimize the total cost were found. The results of the analysis are summarized as follows. Fast breeder reactors could be introduced in the optimal strategy when they can economically compete with LWRs with 30 year storage of spent fuel. In order that fast breeder reactors monopolize the new reactor market after the achievement of their technical availability, their capital cost should be less than 0.9 times as much as that of LWRs. When a certain amount of reprocessing commitment is assumed, the condition of employing fast breeder reactors in the optimal strategy is mitigated. In the optimal strategy, reprocessing is done just to meet plutonium demand, and the storage of spent fuel is selected to adjust the mismatch of plutonium production and utilization. The price hike of uranium ore facilitates the commercial adoption of fast breeder reactors. (Kako, I.)

  11. Optimization of binary breeder reactor VI - An acceptable project of binary breeder reactor

    Ishiguro, Y.; Dias, A.F.


    A binary breeder reactor that achieves desired characteristics reasonably well has been developed. Its design and characteristics are reported. Previous models showed several complications that result from introduction of 233 U/Th fuel in the core of a LMFBR, compared to purely Pu/U fueled ones. In this new model, the core is made larger to achieve higher breeding ratios and longer refueling intervals, the number of fuel assemblies is increased to accomodate a larger number of control rod assemblies required to compensate for reactivity losses and to control oscillations of the power densities, and, consequently, the fuel inventories are higher. High fuel burnups are achieved without too much complications in the refueling schedule and the power densities can be maintained reasonably constant over an operational cycle. Low sodium void reactivity reduce the potential for severe accidents and a reasonably efficient utilization of thorium can be realized. (Author) [pt

  12. Unusual occurrences in fast breeder test reactor

    Kapoor, R.P.; Srinivasan, G.; Ellappan, T.R.; Ramalingam, P.V.; Vasudevan, A.T.; Iyer, M.A.K.; Lee, S.M.; Bhoje, S.B.


    Fast Breeder Test Reactor (FBTR) is a 40 MWt/13.2 MWe sodium cooled mixed carbide fuelled reactor. Its main aim is to generate experience in the design, construction and operation of fast reactors including sodium systems and to serve as an irradiation facility for the development of fuel and structural materials for future fast reactors. It achieved first criticality in Oct 85 with Mark I core (70% PuC - 30% UC). Steam generator was put in service in Jan 93 and power was raised to 10.5 MWt in Dec 93. Turbine generator was synchronised to the grid in Jul 97. The indigenously developed mixed carbide fuel has achieved a burnup of 44,000 MW-d/t max at a linear heat rating of 320 W/cm max without any fuel clad failure. The commissioning and operation of sodium systems and components have been smooth and performance of major components, viz., sodium pumps, intermediate heat exchangers and once through sodium heated steam generators (SG) have been excellent. There have been three minor incidents of Na/NaK leaks during the past 14 years, which are described in the paper. There have been no incident of a tube leak in SG. However, three incidents of water leaks from water / steam headers have been detailed. The plant has encountered some unusual occurrences, which were critically analysed and remedial measures, in terms of system and procedural modifications, incorporated to prevent recurrence. This paper describes unusual occurrences of fuel handling incident of May 1987, main boiler feed pump seizure in Apr 1992, reactivity transients in Nov 1994 and Apr 1995, and malfunctioning of the core cover plate mechanism in Jul 1995. These incidents have resulted in long plant shutdowns. During the course of investigation, various theoretical and experimental studies were carried out for better understanding of the phenomena and several inspection techniques and tools were developed resulting in enriching the technology of sodium cooled reactors. FBTR has 36 neutronic and process

  13. Liquid metal cooled fast breeder nuclear reactors

    Barnes, S.


    Reference is made to liquid metal cooled fast breeder reactors of the 'pool' kind. In this type of reactor the irradiated fuel is lowered into a transfer rotor for removal to storage facilities, this rotor normally having provision for the temporary storage of 20 irradiated fuel assemblies, each within a stainless steel bucket. For insertion or withdrawal of a fuel assembly the rotor is rotated to bring the fuel assembly to a loading or discharging station. The irradiated fuel assembly is withdrawn from the rotor within its bucket and the total weight is approximately 1000 kg, which is lifted about 27 m. In the event of malfunction the combination falls back into the rotor with considerable force. In order to prevent damage to the rotor fracture pins are provided, and to prevent damage to the reactor vessel and other parts of the reactor structure deformable energy absorbing devices are provided. After a malfunction the fractured pins and the energy absorbing devices must be replaced by remote control means operated from outside the reactor vault - a complex operation. The object of the arrangement described is to provide improved energy absorbing means for fuel assemblies falling into a fuel transfer rotor. The fuel assemblies are supported in the rotor by elastic means during transfer to storage and a hydraulic dash pot is provided in at least one position below the rotor for absorbing the energy of a falling fuel assembly. It is preferable to provide dash pots immediately below a receiving station for irradiated fuel assemblies and immediately below a discharge station. Each bucket is carried in a container that is elastically supported in the transfer rotor on a helical coil compression spring, so that, in the event of a malfunction the container and bucket are returned to their normal operating position after the force of the falling load has been absorbed by the dash pot. The transfer rotor may also be provided with recoil springs to absorb the recoil energy

  14. Dynamics and control of molten-salt breeder reactor

    Vikram Singh


    Full Text Available Preliminary results of the dynamic analysis of a two-fluid molten-salt breeder reactor (MSBR system are presented. Based on an earlier work on the preliminary dynamic model of the concept, the model presented here is nonlinear and has been revised to accurately reflect the design exemplified in ORNL-4528. A brief overview of the model followed by results from simulations performed to validate the model is presented. Simulations illustrate stable behavior of the reactor dynamics and temperature feedback effects to reactivity excursions. Stable and smooth changes at various nodal temperatures are also observed. Control strategies for molten-salt reactor operation are discussed, followed by an illustration of the open-loop load-following capability of the molten-salt breeder reactor system. It is observed that the molten-salt breeder reactor system exhibits “self-regulating” behavior, minimizing the need for external controller action for load-following maneuvers.

  15. Dynamics and control of molten-salt breeder reactor

    Sing, Vikram; Lish, Matthew R.; Chvala, Ondrej; Upadhyaya, Belle R. [Dept. of Nuclear Engineering, University of Tennessee, Knoxville (United States)


    Preliminary results of the dynamic analysis of a two-fluid molten-salt breeder reactor (MSBR) system are presented. Based on an earlier work on the preliminary dynamic model of the concept, the model presented here is nonlinear and has been revised to accurately reflect the design exemplified in ORNL-4528. A brief overview of the model followed by results from simulations performed to validate the model is presented. Simulations illustrate stable behavior of the reactor dynamics and temperature feedback effects to reactivity excursions. Stable and smooth changes at various nodal temperatures are also observed. Control strategies for molten-salt reactor operation are discussed, followed by an illustration of the open-loop load-following capability of the molten-salt breeder reactor system. It is observed that the molten-salt breeder reactor system exhibits “self-regulating” behavior, minimizing the need for external controller action for load-following maneuvers.

  16. Light water breeder reactor using a uranium-plutonium cycle

    Radkowsky, A.; Chen, R.


    This patent describes a light water receptor (LWR) for breeding fissile material using a uranium-plutonium cycle. It comprises: a prebreeder section having plutonium fuel containing a Pu-241 component, the prebreeder section being operable to produce enriched plutonium having an increased Pu-241 component; and a breeder section for receiving the enriched plutonium from the prebreeder section, the breeder section being operable for breeding fissile material from the enriched plutonium fuel. This patent describes a method of operating a light water nuclear reactor (LWR) for breeding fissile material using a uranium-plutonium cycle. It comprises: operating the prebreeder to produce enriched plutonium fuel having an increased Pu-241 component; fueling a breeder section with the enriched plutonium fuel to breed the fissile material

  17. The uranium market and its relevance for the fast breeder

    Marth, W.


    Uranium is a very particular element: the technology of light water nuclear power plants is based on its existence, and the doubts with respect to the long-term availability form the basis for the development of fast breeder reactor. At the same time uranium is a merchandise obedient to the laws of the market, which are based on offer and demand, which are however also affected by influences outside the market, particularly in the last time. Here an attempt is made to describe these peculiarities of the uranium market for the past, the presence and the visual future, and to give some insight into the economic field around the breeder reactor, as the uranium market is of great relevance for the introduction of the breeder as an electric power producing system. (orig.) [de

  18. Environmental assessment for Breeder Reprocessing Engineering Test (BRET): Revision 1

    Lerch, R.E.


    This Environmental Assessment (EA) is for the proposed installation and operation of an integrated breeder fuel reprocessing test system in the shielded cells of the Fuels and Materials Examination Facility (FMEF) at Hanford and the associated modifications to the FMEF to accommodate BRET. These modifications would begin in FY-1986 subject to Congressional authorization. Hot operations would be scheduled to start in the early 1990's. The system, called the Breeder Reprocessing Engineering Test (BRET), is being designed to provide a test capability for developing the demonstrating fuel reprocessing, remote maintenance, and safeguards technologies for breeder reactor fuels. This EA describes (1) the action being proposed, (2) the existing environment which would be affected, (3) the potential environmental impacts from normal operations and severe accidents from the proposed action, (4) potential conflicts with federal, state, regional, and/or local plans for the area, and (5) environmental implications of alternatives considered to the proposed action. 41 refs., 10 figs., 31 tabs

  19. Feeding broiler breeders to improve their welfare whilst maintaining productivity

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    of their litter may have affected their thermoregulation. This experiment indicates that high fibre diets can alleviate the feeling of hunger currently experienced by broiler breeders, and a high ratio of insoluble fibre can reduce stereotypies and may improve the well-being of the birds.......In the present experiment different types of fibre sources were used in high fibre diets to increase feeding quantity whilst limiting the growth of broiler breeders to industry recommended levels. Using scatter feeding, three diets (CON, commercial control diet; INF, high insoluble fibre content......; and SOF, high soluble fibre content) were each fed to 10 groups of 12 broiler breeder chickens (age: 2 to 15 weeks). Similar growth rates were obtained on different quantities of food (e.g. food allocation in week 14: approx. 80, 100, and 130 g/d for CON, INF, and SOF, respectively) with all birds...

  20. Comparative economics of the breeder and light water reactor

    Chow, B.G.


    The issue of breeder timing is studied in this article via a breakeven analysis in which the key driving variables are conveniently segregated into two groups, with uranium price providing the linkage. In one group, the technical and cost characteristics of reactors and fuel cycles determine the uranium breakeven price. In the other group, nuclear demand projections and the uranium supply schedule determine the time paths of uranium price for a given composition of reactor types. The author finds that, even if proliferation risk is ignored, the breeder is not economically competitive with a 30%-improved once-through light water reactor before the year 2030 in the USA and in the world outside communist areas as a whole in 90% of the cases examined. In the exceptional cases, the penalty of delaying commercial breeder introduction to 2030 is small and well within the noise level of long-term energy planning. (author)

  1. R + D work on gas-cooled breeder development

    Dalle Donne, M.; Dorner, S.; Jacobs, G.; Meyer, L.; Rehme, K.; Schumacher, G.; Wilhelm, D.


    The development work for the gas-cooled breeder in the Karlsruhe Nuclear Research Center may be assigned to two different groups: a) Investigations on fuel elements. b) Studies concerning the safety of gas-cooled fast breeder reactors. To the first group there belongs the work related to the: - heat transfer between fuel elements and coolant gas, - influence of increased content of water vapor in helium or the fuel rods. The second group concerns: - establishing a computer code for transient calculations in the primary and secondary circuit of a gas-cooled fast breeder reactor, - steam reactivity coefficients, - the core destruction phase of hypothetical accidents, - the core-catcher using borax. (orig./RW) [de

  2. On the history of the Fast Breeder Project

    Marth, W.


    The evolution of the Fast Breeder Project from its beginning at the Karlsruhe Nuclear Research Center to the present cooperation of various organisations especially in the Federal Republic of Germany, the Netherlands, Belgium and France is described in its historical context. Where as the emphasis was on physical studies of fast neutron cores in the early phase, technological and safety problems gained importance in the subsequent development. The increasing collaboration with industry and the support by government funds resulted in the design and start of construction of the prototype SNR 300. The objectives and the reasoning underlying important intermediate decisions are described. In the meantime, licensing and funding problems have become decisive for the project schedule. The present report also gives an account of the international and national political aspects which influence the breeder reactor development. In the annex all fast breeder publications of the Karlsruhe Nuclear Research Center are listed. (orig.) [de

  3. Vospitanie and Regime Change: Teacher-Education Textbooks in Soviet and Post-Soviet Ukraine

    Bogachenko, Tatiana; Perry, Laura


    This article examines the pedagogical dimension of vospitanie, or character formation, in communist and post-communist education. It explores how vospitanie is conceptualized in two teacher-education textbooks--one from each period--in Ukraine, a post-Soviet country. Comparative analysis shows how conceptualizations of vospitanie have evolved over…

  4. The Soviet-American gallium experiment (SAGE)

    Garvey, G.T.


    The Soviet-American Gallium Experiment (SAGE) undertaking is a multi-institutional collaboration among scientists from the Institute for Nuclear Research, Moscow (INR), Los Alamos National Laboratory (LANL), and several US universities. It's purpose is to measure the number of low-energy electron neutrinos emitted from the Sun that arrive at this planet. As such, it is an extremely important experiment, touching on fundamental physics issues as well as solar dynamics. In contrast to the strategic overviews, plans, and hopes for intentional collaboration presented earlier today, SAGE is an ongoing working effort with high hopes of producing the first measurement of the Sun's low-energy flux. There are several international physics collaborations involving US and Soviet scientists at the large accelerator installations throughout the world. As the scale of research gets ever larger, requiring ever more resources and then larger collaborations. Much physics research lies solely in the realm of basic research so that governments feel easier about collaborations. Contacts between the US and USSR scientists interested in nuclear and particle physics goes back to the nineteen fifties and have continued with only minor interruptions since then. Over the past two decades the principal oversight of these activities has been through the Joint Coordinating Committee on the Fundamental Properties of Matter, supported by the DOE in the US and the State Committee for Atomic Energy in the USSR. The Academies of Science of both countries have been very helpful and supportive. Each venture has some distinguishing features; in the case of SAGE, the unique aspects are the collaboration between Soviet scientists and scientists at a DOE weapons laboratory and the fact that the experiment is carried out in a remote region of the USSR. The particular problems caused are discussed. 3 refs., 3 figs

  5. Uranium alloys for using in fast breeder reactors

    Moura Neto, C.; Pires, O.S.


    The U-Zr and U-Ti alloys are studied, given emphasis to the high solute solubility in gamma phase of uranium, which is suitable for using as metal fuel in fast breeder reactors. The alloys were prepared in electron beam furnaces and submitted to X-ray diffraction, X-ray fluorescence, microhardness, optical metallography, and chemical analysis. The obtained values are good agreements with the literature data. The study shows that the U-Zr presents better characteristics than the U-Ti for using as fuel in fast breeder reactors. (M.C.K.) [pt

  6. Inherent safe fast breeder reactors and actinide burners, metallic fuel

    Dorner, S.; Schumacher, G.


    Nuclear power without breeder strategy uses the possibilities for the energy supply only to a small extend compared to the possibilities of fast breeder reactors, which offer an energy supply for thousands of years. Moreover, a fast neutron device offers the opportunity to run an actinide-burner that could improve the situation of waste management. Within this concept metallic fuel could play a key role. The present report shows some important aspects of the concept like the pyrometallic reprocessing, the behaviour of metallic fuel during a core meltdown accident and others. The report should contribute to the discussion of these problems and initialize further work

  7. Modeling delayed neutron monitoring systems for fast breeder reactors

    Bunch, W.L.; Tang, E.L.


    The purpose of the present work was to develop a general expression relating the count rate of a delayed neutron monitoring system to the introduction rate of fission fragments into the sodium coolant of a fast breeder reactor. Most fast breeder reactors include a system for detecting the presence of breached fuel that permits contact between the sodium coolant and the mixed oxide fuel. These systems monitor for the presence of fission fragments in the sodium that emit delayed neutrons. For operational reasons, the goal is to relate the count rate of the delayed neutron monitor to the condition of the breach in order that appropriate action might be taken

  8. Secure Automated Fabrication: an overview of remote breeder fuel fabrication

    Nyman, D.H.; Graham, R.A.


    The Secure Automated Fabrication (SAF) line is an automated, remotely controlled breeder fuel pin fabrication process which is to be installed in the Fuels and Materials Examination Facility (FMEF). The FMEF is presently under construction at Hanford and is scheduled for completion in 1984. The SAF line is scheduled for startup in 1987 and will produce mixed uranium-plutonium fuel pins for the Fast Flux Test Facility (FFTF) and the Clinch River Breeder Reactor Plant (CRBRP). The fabrication line and support systems are described

  9. Prevalence of Campylobacter jejuni in poultry breeder flocks

    Ludovico Dipineto


    Full Text Available The aim of this work is to present the preliminary results of a study about the prevalence of Campylobacter jejuni in poultry breeder flocks. It was examined three different breeder flocks of Bojano in Molise region. A total of 360 cloacal swabs and 80 enviromental swabs was collected. Of the 3 flocks studied, 6.9% tested were positive for Campylobacter spp. The most-prevalent isolated species is C. jejuni (8.2%. Only 3 of the 360 cloacal swabs samples examined were associated with C. coli. The environmental swabs resulted negative. This results confirms again that poultry is a reservoir of this germ.

  10. Soviet and East European energy databook

    Wilson, D.C.


    For the USSR, energy data is assembled under the following main headings: energy and the economy; production; engineering; exploration; transport of fuel; refining; consumption by sector; employment; finance; trade; electricity. There are 162 tables. Five tables of data on Eastern Europe as a region cover production of energy, consumption, and exports of crude and oil products. Using similar broad headings as these for the USSR, a further 184 tables give data for the following individual countries: Bulgaria; Czechoslovakia; East Germany; Hungary; Poland; Romania; Yugoslavia. The data has been accumulated from Soviet and East European sources, mainly newspapers, journals, annual yearbooks and private contacts and the chief of these are listed. (UK)

  11. JPRS Report, Soviet Union, Political Affairs.


    jour- nals almost at the same time as A. Rybakov’s "Children of the Arbat," V. Dudintsev’s "White Clothes," D. Granin’s "Diehard," and the essays ... lyrical poet," Akh- matova is able to make "concise, vivid, and resounding statements regarding the salient or distinctive features of the spiritual...known poet M. Avi-Shaul; a photo essay on Soviet artists and cultural figures, who had visited Israel in recent years; on the Romen Theater, headed by

  12. Generating the flux map of Nigeria Research Reactor-1 for efficient ...

    One of the main uses to which the Nigeria Research Reactor-1 (NIRR-1) will be put is neutron activation analysis. The activation analyst requires information about the flux level at various points within and around the reactor core to enable him identify the point of optimum flux (at a given operating power) for any irradiation ...

  13. Socialization of the Child in the Soviet Union.

    Sandanavicius, Mary


    The socialization process of the child in the Soviet Union is examined in terms of socialistic/communistic political philosophy and the general attitudes of the Soviets toward social sciences, child rearing, and educational practice. The family, school, and youth organizations are also discussed as socializing agents. (Author/KC)

  14. Afghanistan: The First Five Years of Soviet Occupation


    July 1982, reported that be- fore reaching the Kabul River his group passed three DRA outposts or forts. One of his guerrilla companions assured him...driver, chef , doctor, and six chief advisers, all were Soviets. At the palace where he resided and worked, the guard force was Soviet, except for a

  15. The Adversary System in Low-Level Soviet Economic Decisionmaking.


    34- ° .. 78 - capital or a few countertrade agreements, will solve their problems for them. This is markedly different from the overall Soviet pattern...currency countertrade practice, the considerations of this Note would permit further refinement of predictions of Soviet economic decisionmaking that

  16. Social-historical memory about soviet the pas: empiric research

    E. G. Pozdnyakova­Kirbatyeva


    Also considered komomeratyvni properties attitude to the soviet past in the population of different regions of the country and the most general description of the memory of the soviet past, namely the degree of interest of the population of different regions to the past.

  17. 'A people forgotten by history': Soviet Studies of the Kurds

    Leezenberg, M.


    The Russian/Soviet experience raises complex general questions concerning orientalism, conceptual hegemony, and the politics of (post-)colonial knowledge. Russia was not an empire in Said's sense, and drew much of its orientalist categories from non-imperialist German sources; the Soviet Union was

  18. Soviet Cultural Diplomacy in Denmark during the Cold War

    Frederichsen, Kim


    The article discusses the Soviet apparatus for cultural diplomacy abroad during the Cold War period using the worlds oldest society for friendship with the Soviet Union as a case study. The article looks at question from 3 diffrent angels: 1: Organisation, planning and financing. 2: Activities. 3...

  19. Soviet Counterinsurgency Operations in Afghanistan (1979-1988)


    Soviet commitment in Afghanistan. was to be an "economy of force" mission, with the focus of Red Army combat power to remain in the European theatre ...critically for its operational and tactical resupply capability. ’’The Soviets in Afghanis4Ul,li1ce the Americansin Vietnam, discovered thai helicopters were

  20. Socialism and Education in Cuba and Soviet Uzbekistan

    Charon-Cardona, Euridice


    During the Cold War over half a million Asians, Africans and Latin Americans studied and graduated in the Soviet Union's universities and technical schools as part of this country's educational aid policies. Cuba was an intermediary player in the Cold War geopolitical contest between the United States and the Soviet Union, fuelled by the…

  1. Simulation and design of an electron beam ion source charge breeder for the californium rare isotope breeder upgrade

    Clayton Dickerson


    Full Text Available An electron beam ion source (EBIS will be constructed and used to charge breed ions from the californium rare isotope breeder upgrade (CARIBU for postacceleration into the Argonne tandem linear accelerator system (ATLAS. Simulations of the EBIS charge breeder performance and the related ion transport systems are reported. Propagation of the electron beam through the EBIS was verified, and the anticipated incident power density within the electron collector was identified. The full normalized acceptance of the charge breeder with a 2 A electron beam, 0.024π  mm mrad for nominal operating parameters, was determined by simulating ion injection into the EBIS. The optics of the ion transport lines were carefully optimized to achieve well-matched ion injection, to minimize emittance growth of the injected and extracted ion beams, and to enable adequate testing of the charge bred ions prior to installation in ATLAS.

  2. U.S. reference paper on national decisions on breeder development and deployment


    Factors involved in making national decisions on the deployment of breeder reactor systems are identified in terms of a nation's potential for electrification, capital resources, the available industrial and manpower infrastructure and importance attached to energy independence and the degree to which a breeder program can help realize this objective in the time scale of interest. The specific factors analysed are: the high capital cost of the breeder and the one-time transition costs to bring the breeder to maturity the high breeder research, development and demonstration costs, the impact of discount rate, and the fuel cycle costs, e.g. indigeneous facilities or purchase of services. A principal conclusion of this paper is that nations may find it more economical to continue to deploy LWRs for a number of years rather than to consider the breeder option because of the initial high breeder capital cost and high breeder R and D costs

  3. The evolution of Soviet forces, strategy, and command

    Ball, D.; Bethe, H.A.; Blair, B.G.; Bracken, P.; Carter, A.B.; Dickinson, H.; Garwin, R.L.; Holloway, D.; Kendall, H.W.


    This paper reports on the evolution of Soviet forces, strategy and command. Soviet leaders have repeatedly emphasized that it would be tantamount to suicide to start a nuclear war. Mutual deterrence, however, does not make nuclear was impossible. The danger remains that a large-scale nuclear was could start inadvertently in an intense crisis, or by escalation out of a conventional war, or as an unforeseen combination of these. For these reasons crisis management has become a central issue in the United States, but the standard Soviet response to this Western interest has been to say that what is needed is crisis avoidance, not recipes for brinkmanship masquerading under another name. There is much sense in this view. Nevertheless, this demeanor does not mean that the Soviet Union has given no thought to the danger that a crisis might lead to nuclear war, only that Soviet categories for thinking about such matters differ from those employed in the United States

  4. The Soviet applied information sciences in a time of change

    Bengston, J.; Cronin, R.R.; Davidson, R.B.


    The Foreign Applied Sciences Assessment Center (FASAC) conducts reviews of selected areas of foreign basic and applied science by US scientists who are technically expert and active in the fields reviewed. Several of the FASAC assessments of Soviet science have involved various aspects of the information sciences, including enabling technologies and applications, as well as the core information sciences. This report draws upon those FASAC assessment reports, the expert judgment of some of the authors of those reports, and other public sources to characterize the current state of the information sciences in the Soviet Union and the effects of information science capabilities upon other areas of Soviet science and technology. This report also provides estimates of the likely effect of the political and social reforms underway in the Soviet Union on future Soviet progress in the information sciences and, at a more general level, in science and technology. 41 refs., 7 tabs.

  5. Status and prospects of thermal breeders and their effect on fuel utilization


    The report evaluates the extent to which thermal breeders and near-breeders might complement fast breeders or serve as an alternative in solving the long-term nuclear fuel supply problem. It considers in a general way issues such as proliferation, safety, environmental impacts, economics, power plant availability and fuel cycle versatility in order to determine whether thermal breeder reactors offer advantages or disadvantages with respect to such issues.

  6. Status and prospects of thermal breeders and their effect on fuel utilization


    The report evaluates the extent to which thermal breeders and near-breeders might complement fast breeders or serve as an alternative in solving the long-term nuclear fuel supply problem. It considers in a general way issues such as proliferation, safety, environmental impacts, economics, power plant availability and fuel cycle versatility in order to determine whether thermal breeder reactors offer advantages or disadvantages with respect to such issues

  7. Skill Formation and Utilisation in the Post-Soviet Transition: Higher Education Planning in Post-Soviet Georgia

    Gvaramadze, Irakli


    Changes in the former Soviet system had a dramatic influence on higher education in Georgia. The main objective of the current article is to analyse implications of the post-Soviet transition for the skill formation and skill utilisation system in Georgia. In particular, the study analyses recent trends in Georgian higher education including…

  8. Fast breeder fuel cycle, worldwide and French prospects

    Rapin, M.


    A review is given of fast breeder fuel cycle development from both the technological and the economical points of view. LMFBR fuel fabrication, reactor operation, spent fuel storage and transportation, reprocessing and fuel cycle economics are topics considered. (U.K.)

  9. Feeding broiler breeder flocks in relation to bird welfare aspects

    Jong, de I.C.; Krimpen, van M.M.


    To ensure health and reproductive capacity of the birds, broiler breeders are fed restricted during the rearing period, and to a lesser extent also during the production period. Although restricted feeding improves health and thereby bird welfare, on the other hand the birds are chronically hungry

  10. Impact of nutrition on welfare aspects of broiler breeder flocks

    Krimpen, van M.M.; Jong, de I.C.


    To ensure health and reproductive performance, broiler breeders are feed restricted during the rearing period and, to a lesser extent, during the production period. Although restricted feeding improves health and bird welfare, on the other hand the birds are chronically hungry and suffer from

  11. Levels of safety satisfactory for commercialization of the breeder

    Ferguson, R.L.


    A brief discussion is presented of the Department of Energy's LMFBR safety program and the safety levels which DOE believes would be satisfactory for the commercialization of the breeder are indicated. Some observations are offered on the Three Mile Island accident and some of its implications are discussed for the LMFBR program

  12. Utilization of large electromagnetic pumps in the fast breeder reactors

    Deverge, C.; Lefrere, J.P.; Peturaud, P.; Sauvage, M.


    After an overview concerning the induction annular electromagnetic pumps and the dimensioning methods usually utilized, development of these components for a fast breeder integrated reactor is considered: - utilization of cooled EMP in the intermediate circuit, - utilization of immersed pumps, coupled with the intermediate exchanger, for the primary pumping; dimensioning, energetic aspects, and effects on the power plant geometrical configurations [fr

  13. Multiple recycling of fuel in prototype fast breeder reactor

    In the FBR closed fuel cycle, possibility of multi-recycle has been recognized. In the present study, Pu-239 equivalence approach is used to demonstrate the feasibility of achieving near constant input inventory of Pu and near stable Pu isotopic composition after a few recycles of the same fuel of the prototype fast breeder ...

  14. Symposium on key questions about the fast breeder reactor


    Except for several introductions on various aspects of the fast breeder reactor development this paper contains the full texts of the discussions held in the sub-groups panels on resp. technical matters, environment and health, society, politics and economics. The main issues of each discussion are summarized

  15. Conceptual design study for a mirror fusion breeder

    Huang Jinhua; Deng Boquan; Li Guiqing


    A mirror fusion breeder, CHD, has been designed for providing plenty of nuclear fuel for light water reactors to meet the needs for rapid development of nuclear power in the first half of next century. The breeder is able to support the nuclear fuel needs for more than 10 LWRs of equal scale in power with fuel enriched directly in CHD without reprocessing. Measures are taken to flatten the power density distribution in the blanket so that fission is suppressed in the region close to the plasma, and by this way fuel production is enhanced for this direct enriched fusion breeder. In order to reduce the MHD pressure drop, LiPb flows in the blanket axially. Though the tritium inventory in the reactor is very low, special material and design have to be developed to reduce the permeation of tritium through the coolant pipes. The cost of electricity from the system, consisting of 11 LWR plants and one fusion breeder is predicted to be 1.05 times of that from a traditional LWR plant. This figure is insensitive both to the cost of CHD and its support ratio

  16. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    Riber, Anja B.; Jong, de Ingrid; Weerd, van de Heleen A.; Steenfeldt, Sanna


    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of

  17. Technology of the production of breeder fuel elements

    Funke, P.


    A survey is presented of the fabrication of oxide and carbide fuels and of the fuel rod for fast breeders (KNK, SNR-300). The advantages of the chosen methods are explained. The main points of development concerning the oxide fuel rod are gone into. The process sequence for plutonium oxide and plutonium carbide processing is presented in a flow chart. (HR) [de

  18. The German fast breeder programme and fuel cycle activities

    Marth, W.; Lahr, H.


    After a review of the German experimental power plant KNK II, the present status of the prototype SNR 300 project is described, including its political and licensing aspects. Breeder cooperation with France is gaining momentum. Research and development in core physics and fuel development and implications for the reprocessing of spent fuel are discussed. (author)

  19. Methodology for estimating sodium aerosol concentrations during breeder reactor fires

    Fields, D.E.; Miller, C.W.


    We have devised and applied a methodology for estimating the concentration of aerosols released at building surfaces and monitored at other building surface points. We have used this methodology to make calculations that suggest, for one air-cooled breeder reactor design, cooling will not be compromised by severe liquid-metal fires

  20. Utilisation of synthetic amino acids by broiler breeder hens | Nonis ...

    This study was conducted to examine the response of broiler breeder hens to feeds supplemented with synthetic lysine and methionine when fed once or twice daily during peak production. Replacing intact protein with increasing amounts of free lysine and methionine, up to 2.3 g/kg feed, had no effect on feed intake, ...

  1. Core catcher cooling for a gas-cooled fast breeder

    Dalle Donne, M.; Dorner, S.; Schretzmann, K.


    Water, molten salts, and liquid metals are under discussion as coolants for the core catcher of a gas-cooled fast breeder. The authors state that there is still no technically mature method of cooling a core melt. However, the investigations carried out so far suggest that there is a solution to this problem. (RW/AK) [de

  2. the contrasting attitudes of plant breeders and molecular biologists ...

    Socialization into disciplinary cultures, organizational factors and individual anxieties seem to inhibit inter-disciplinary collaboration. The majority of rice breeders and a small group of molecular biologists emphasize the relative merits of marker-assisted selection (MAS) in the near term vis-à-vis the currently controversial ...

  3. Semen bacterial flora of Rhode Island Breeder cocks in Zaria ...

    The semen used in this study was collected from 77 Rhode Island Breeder cocks reared in battery cages under intensive management from a private farm in Zaria, Kaduna State, Nigeria using the back massage procedure, 27 of the 77 semen samples (35.1%) contained bacterial isolates. None of the samples grew fungi.

  4. Clinch River Breeder Reactor Plant Project: construction schedule

    Purcell, W.J.; Martin, E.M.; Shivley, J.M.


    The construction schedule for the Clinch River Breeder Reactor Plant and its evolution are described. The initial schedule basis, changes necessitated by the evaluation of the overall plant design, and constructability improvements that have been effected to assure adherence to the schedule are presented. The schedule structure and hierarchy are discussed, as are tools used to define, develop, and evaluate the schedule

  5. Fission-suppressed hybrid reactor: the fusion breeder

    Moir, R.W.; Lee, J.D.; Coops, M.S.


    Results of a conceptual design study of a 233 U-producing fusion breeder are presented. The majority of the study was devoted to conceptual design and evaluation of a fission-suppressed blanket and to fuel cycle issues such as fuel reprocessing, fuel handling, and fuel management. Studies in the areas of fusion engineering, reactor safety, and economics were also performed

  6. Rough passage in USA for first breeder reactor

    Norman, C.


    The present status of the liquid metal fast breeder reactor (LMFBR) programme in the USA is reviewed, including administrative and technical problems. This programme is stated to be the highest priority energy research and development project supported by public funds, estimated at present to cost more than 10,000 million dollars, but it is beset by difficulties and criticism. (U.K.)

  7. DeBeNe Test Facilities for Fast Breeder Development

    Storz, R.


    This report gives an overview and a short description of the test facilities constructed and operated within the collaboration for fast breeder development in Germany, Belgium and the Netherlands. The facilities are grouped into Sodium Loops (Large Facilities and Laboratory Loops), Special Equipment including Hot Cells and Reprocessing, Test Facilities without Sodium, Zero Power Facilities and In-pile Loops including Irradiation Facilities

  8. Towards commercial fast breeder reactors the first 1200 MWe unit

    Banal, M.; Carle, R.

    The public probably thinks of these fast breeder reactors in terms of their rising unit capacity: RAPSODIE 20 MW (thermal), raised to 40 MW, PHENIX 25 MWe, and now 1200 MWe. However, the purposes of the project and the framework of construction have been fundamentally different in each case. Design parameters and the development program of the LMFBR are presented. (auth)

  9. Broiler breeders should not be reared on long photoperiods | Lewis ...

    This trial compared the responses of four broiler breeder genotypes to a typical lighting programme advocated for birds in lightproof housing with the provision of 14-h photoperiods to 20 weeks and 16 h in lay. The long-day rearing resulted in a 26-d delay in sexual maturation, seven fewer eggs to 60 weeks, a 2.5-g ...

  10. Status of fast breeder reactor development in the United States

    Horton, K [U.S. Department of Energy, Washington, DC (United States)


    The energy policy of the United States is aimed at shifting as rapidly as practicable from an oil dependent economy to one that relies heavily on other fuels and energy sources. Nuclear power Is now and is expected to continue to be an important factor in achieving this goal. If nuclear power is to contribute to a solution of future energy needs, demonstration of the breeder reactor as a viable source of essentially inexhaustible energy supply is essential. The US DOE program for development of the fast breeder reactor has witnessed some notable events in the past year. Foremost among these Is the successful operational testing of the Fast Flux Test Facility (FFTF), located at.the Hanford Engineering Development Laboratory. The reactor reached full design power of 400 MW(t) on December 21, 1980, and has performed remarkably close to design specifications. Design of the Clinch River Breeder Reactor Plant (CRBRP), a 375 MW(e) LMFBR, is now over 80 percent complete. About $530 million in components have been ordered; component deliveries total approximately $124 million; work-in-process totals another $204 million. Construction of the plant, however, has been suspended since 1977. With the concurrence of the U.S. Congress and approvals from the appropriate authorities work on the safety review and site clearing for construction can resume. The Conceptual Design Study for a large, 1000 MW(e) LMFBR Large Developmental Plant was recently completed on a schedule commensurate with submission of a full report to the Congress at the end of March, 1981. This report is the culmination of a study which began in October, 1978 and involved contributions from U.S. reactor manufacturers and US DOE laboratories. The US DOE is carrying forward a comprehensive technology development program. This effort provides direct support to the FFTF and CRBRP projects and to the LDP. It also supports technology development which is generic to the overall LMFBR program. Funding for breeder

  11. Status of fast breeder reactor development in the United States

    Horton, K.


    The energy policy of the United States is aimed at shifting as rapidly as practicable from an oil dependent economy to one that relies heavily on other fuels and energy sources. Nuclear power Is now and is expected to continue to be an important factor in achieving this goal. If nuclear power is to contribute to a solution of future energy needs, demonstration of the breeder reactor as a viable source of essentially inexhaustible energy supply is essential. The US DOE program for development of the fast breeder reactor has witnessed some notable events in the past year. Foremost among these Is the successful operational testing of the Fast Flux Test Facility (FFTF), located at.the Hanford Engineering Development Laboratory. The reactor reached full design power of 400 MW(t) on December 21, 1980, and has performed remarkably close to design specifications. Design of the Clinch River Breeder Reactor Plant (CRBRP), a 375 MW(e) LMFBR, is now over 80 percent complete. About $530 million in components have been ordered; component deliveries total approximately $124 million; work-in-process totals another $204 million. Construction of the plant, however, has been suspended since 1977. With the concurrence of the U.S. Congress and approvals from the appropriate authorities work on the safety review and site clearing for construction can resume. The Conceptual Design Study for a large, 1000 MW(e) LMFBR Large Developmental Plant was recently completed on a schedule commensurate with submission of a full report to the Congress at the end of March, 1981. This report is the culmination of a study which began in October, 1978 and involved contributions from U.S. reactor manufacturers and US DOE laboratories. The US DOE is carrying forward a comprehensive technology development program. This effort provides direct support to the FFTF and CRBRP projects and to the LDP. It also supports technology development which is generic to the overall LMFBR program. Funding for breeder

  12. Linear accelerator-breeder (LAB): a preliminary analysis and proposal


    The development and demonstration of a Linear Accelerator-Breeder (LAB) is proposed. This would be a machine which would use a powerful linear accelerator to produce an intense beam of protons or deuterons impinging on a target of a heavy element, to produce spallation neutrons. These neutrons would in turn be absorbed in fertile 238 U or 232 Th to produce fissile 239 Pu or 233 U. Though a Linear Accelerator-Breeder is not visualized as competitive to a fast breeder such as the LMFBR, it would offer definite benefits in improved flexibility of options, and it could probably be developed more rapidly than the LMFBR if fuel cycle problems made this desirable. It is estimated that at a beam power of 300 MW a Linear Accelerator-Breeder could produce about 1100 kg/year of fissile 239 Pu or 233 U, which would be adequate to fuel from 2,650 to 15,000 MW(e) of fission reactor capacity depending on the fuel cycle used. A two-year design study is proposed, and various cost estimates are presented. The concept of the Linear Accelerator-Breeder is not new, having been the basis for a major AEC project (MTA) a number of years ago. It has also been pursued in Canada starting from the proposal for an Intense Neutron Generator (ING) several years ago. The technical basis for a reasonable design has only recently been achieved. The concept offers an opportunity to fill an important gap that may develop between the short-term and long-term energy options for energy security of the nation

  13. Universal Higher Education and Positional Advantage: Soviet Legacies and Neoliberal Transformations in Russia

    Smolentseva, Anna


    The great expansion of participation in higher education in Russia in the post-Soviet period was the layered and contradictory result of both conditions established in the Soviet period, and the structuring of reforms after the collapse of the Soviet Union in 1992. The Soviet government was strongly committed to the expansion of education across…

  14. Nonlinear dynamics research in the former Soviet Union

    McKenney, B.L.; Krafsig, J.; Moon, F.C.; Shlesinger, M.F.


    This assessment of nonlinear dynamics research in the former Soviet Union was performed by seven US scientists and engineers active in the fields examined. The topics covered include: solid-state systems and circuits, information theory and signal analysis, chaos in mechanical systems, turbulence and vortex dynamics, ocean processes, image processing, and lasers and nonlinear optics. The field of nonlinear dynamics and chaos blossomed in academic settings in both the West and the former Soviet Union during the 1980s. The field went from mathematical abstraction to interesting engineering application areas. Several generalizations can be drawn from the review of Soviet work: Soviet work generally began earlier than Western work, and, in areas that do not require extensive computational resources, that work has kept up with, and often leads, the West. This is especially true in the mathematical analysis of nonlinear phenomena. Soviet researchers have shown an ability to combine numerical or analytic ideas with laboratory experimentation in a smoother, less erratic fashion than Western researchers. Furthermore, contrary to Western practice, the same researchers often do both theoretical and experimental work. In areas that require numerical verification of ideas in the field, the Western work is leading that of the former Soviet Union. This is especially true in the areas of signal processing, simulations of turbulence, and communications. No evidence was found of any significant penetration of ideas of nonlinear dynamics into technological applications of a military or commercial area in the former Soviet Union. Opportunities abound, but specific applications are not apparent

  15. Soviet Advisors Group in South China and Soviet Union Financing of Gomindan War Planes in 1924

    Александр Геннадьевич Юркевич


    Full Text Available The article dwells on the organization and activities of the Soviet advisors group, which assisted to the South China government of Sun Yatsen, its participation in financing Kuomintang political and military projects. The author pointed out that the main aim of the advisors group efforts was to form new Kuomintang power institutions and to bring its policy and army under control, for all that the tactics of implementation of strategy aim were constantly changing.

  16. The nuclear question at the start of the '80s: the breeder reactor

    Owen, R.; Svensson, B.


    The four newspaper articles and the letter cover the following matters: general introduction about breeder reactors and the situation in Swedish politics; visit to Dounreay to discuss breeder reactors (breeding, safety, plutonium production, radiation protection); PuO 2 -UO 2 mixed fuel; description of breeder reactors; efficiency in use of U-235; DFR and PFR; breeder reactors in Swedish politics (arguments for and against nuclear power in general, breeder reactors in particular); discussion of the future of nuclear power in Sweden. (U.K.)

  17. Symbiotic molten-salt systems coupled with accelerator molten-salt breeder (AMSB) or inertial-confined fusion hybrid molten-salt breeder (IHMSB) and their comparison

    Furukawa, K.


    Two types of breeder systems are proposed. One is the combined system of Accelerator Molten-Salt Breeder (AMSB) and Molten-Salt Converter Reactor (MSCR), and the other is the combined system of Inertial-confined Fusion Hybrid Molten-Salt Breeder (IHMSB) and modified MSCR. Both apply the molten-fluorides and have technically deep relations. AMSB would be much simpler and have already high technical feasibility. This will become economical the Th breeder system having a doubling time shorter than ten years and distributing any size of power stations MSCR. (orig.) [de

  18. Power transients of Ghana research reactor-1 using PARET/ANL thermal hydraulic code

    Ampomah-Amoaka, E.; Akaho, E.H.K.; Anim-Sampong, S.; Nyarko, B.J.B.


    PARET/ANL(Version 7.3 of 2007) thermal-hydraulic code was used to perform transient analysis of the Ghana Research Reactor-1.The reactivities inserted were 2.1mk and 4mk.The peak power of 5.81kW was obtained for 2.1 mk insertion whereas the peak power for 4mk insertion of reactivity was 92.32kW.These results compare closely with experiments and theoretical studies conducted previously.

  19. Ex-Soviet Union: oil exporter or importer

    Khartukov, E.M.


    Perestroika of the Soviet economy and the political disintegration of the USSR have raised questions about the international ramifications of the ongoing economic and political developments in the world's largest oil-producing country. First of all, it relates to their impact on the quantity and quality of oil exports from the former Soviet Union (FSU). On the other hand, the opening of the national oil industry to foreign investors focuses their ever growing attention on the complicated internal, inter-republic oil issues which emerged after the sudden fragmentation of the Soviet oil empire into a dozen of sovereign but still interdependent parts. 1 fig., 7 tabs

  20. President Ford and both the Soviet and American ASTP crews


    President Gerald R. Ford removes the Soviet Soyuz spacecraft model from a model set depicting the 1975 Apollo Soyuz Test Project (ASTP), an Earth orbital docking and rendezvous mission with crewmen from the U.S. and USSR. From left to right, Vladamir A. Shatalov, Chief, Cosmonaut training; Valeriy N. Kubasov, ASTP Soviet engineer; Aleksey A. Leonov, ASTP Soviet crew commander; Thomas P. Stafford, commander of the American crew; Donald K. Slayton, American docking module pilot; Vance D. Brand, command module pilot for the American crew. Dr. George M Low, Deputy Administrator for NASA is partially obscured behind President Ford.

  1. Tokamak research in the Soviet Union

    Strelkov, V.S.


    Important milestones on the way to the tokamak fusion reactor are recapitulated. Soviet tokamak research concentrated at the I.V. Kurchatov Institute in Moscow, the A.F. Ioffe Institute in Leningrad and the Physical-Technical Institute in Sukhumi successfully provides necessary scientific and technological data for reactor design. Achievments include, the successful operation of the first tokamak with superconducting windings (T-7) and the gyrotron set for microwave plasma heating in the T-10 tokamak. The following problems have intensively been studied: Various methods of additional plasma heating, heat and particle transport, and impurity control. The efficiency of electron-cyclotron resonance heating was demonstrated. In the Joule heating regime, both the heat conduction and diffusion rates are anomalously high, but the electron heat conduction rate decreases with increasing plasma density. Progress in impurity control makes it possible to obtain a plasma with effective charge approaching unity. (J.U.)

  2. Nuclear power in the Soviet Union

    Ponomarev-Stepnoi, N.N.


    The pros and cons of nuclear power are similar in many countries, but the following pro factors are specific to the Soviet Union: the major sources of conventional fuel are in one area of the country, but energy consumption is concentrated in another; and a large portion of energy is generated using oil and gas. The arguments against nuclear power are as follows: safety requirements and expectations have been increased; and public opinion is negative. A program of nuclear power generation has been developed. New techniques are being implemented to increase safety and enhance operations of different types of nuclear power plants. Its should be obvious in the future that a nuclear power plant has better economic and environmental parameters than existing methods of power generation

  3. Radon therapy in the Soviet Union

    Sansoni, B.; Andrejew, S.V.


    In the Soviet Union approximately one million courses of radon treatment each lasting three weeks are prescribed every year. The curative application of radon used for cardiovascular diseases, including aftercare in cases of cardiac infarction, disorders of the locomotor system and joints and muscles, the male and female sexual system, diseases of the nervous system, endocrinology and metabolic diseases. Contraindication practice is similar to that in Central Europe. Radon is given to skin stimulation by wet and above all dry baths. The radiation exposure of patients from these three-week radon treatments is relatively low. The radon effect is interpreted as 'radiation flash' stimulating the nervous system. The skin plays a particular role in this process, acting as the stimulus acceptor. (orig./MG) [de

  4. Soviet women and the autonomous family.

    Imbrogno, S; Imbrogno, N I


    "The USSR family is changing in form from that of a social collectivity, a bedrock conception to socialism, to that of an autonomous family. Autonomy discloses a lack of homogeneity, an independence of choices over life-styles and a flexibility toward an interpretation given to the meaning of a socialistic state. Women are exceedingly active in making greater use of their legal rights to divorce and abortion and demanding equal status with men both in the workplace and in the home. Women are initiating major social changes, are readily adapting to changing relations and patterns in a complex society and are serving to spearhead changes in the family unit. These factors have generated major changes in the normative, behavioral and structural dimensions of marriage and family life in the Soviet Union." excerpt

  5. Proceedings of the fifteenth international workshop on ceramic breeder blanket interactions

    Tanigawa, Hisashi; Enoeda, Mikio


    This report is the Proceedings of 'the Fifteenth International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors. This workshop was held in Sapporo, Japan on 3-4, Sept. 2009. Twenty six participants from EU, Japan, India, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket development. By this workshop, advance of key technologies for solid breeder blanket development was shared among the participants. Also, desired direction of further investigation and development was recognized. The 20 of the presented papers are indexed individually. (J.P.N.)

  6. Proceedings of the fifteenth international workshop on ceramic breeder blanket interactions

    Tanigawa, Hisashi; Enoeda, Mikio [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki (Japan)


    This report is the Proceedings of 'the Fifteenth International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors. This workshop was held in Sapporo, Japan on 3-4, Sept. 2009. Twenty six participants from EU, Japan, India, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket development. By this workshop, advance of key technologies for solid breeder blanket development was shared among the participants. Also, desired direction of further investigation and development was recognized. The 20 of the presented papers are indexed individually. (J.P.N.)

  7. Identity and Othering in Past and Present: Representations of the Soviet Era in Estonian Post-Soviet Textbooks

    Katrin Kello


    Full Text Available This paper analyses representations of the ‘core Soviet era’ (1945-1985 in Estonian post-Soviet history textbooks (1989-2016. Attitudes towards the Soviet system have been a rich resource for identity building, and hence a powerful political tool across the whole of the post-Soviet block. Based on an analysis of sections about the Soviet era in Estonia in 21 textbooks, the paper takes a look at how textbooks reflect broader processes of social meaning making, identity building and othering after a profound social and political turn. In 1989 and during the early 1990s, perspectives and narratives in Estonian history textbooks were closely related to social memory and national politics, enacting a specific social representation of the Soviet era that dominated the Estonian-speaking public space during the 1990s. The Soviet era, Russia and local Russians became the main Others for Estonia and Estonians. Over time, public discourse has diversified. The national curriculum and textbooks, however, still maintain the canon that formed in 1990s and thus reflect earlier sentiments. Apart from the increasing salience of Soviet-era daily life in more recent textbooks, the thematic choices and emphases have changed little since the 1990s. Therefore, even if the style of writing has ‘cooled down’, issues of identity preservation, resistance and accommodation, together with a saliently negative representation of wrongdoings by the Soviet system, still prevail. On the one hand, this testifies to the resilience of an established tradition in the textbook genre in general. On the other hand, it reflects the dominance of an ethnocentric tradition in Estonian history textbook writing. The paper discusses the implications of these findings for interethnic relations in Estonia.

  8. Soviet Union goes to Sussex for advice on science policy

    Brown, P


    Two state officials from the Soviet Union came to the SPRU, Sussex University, to learn about methods for forecasting trends in science and technology and ways of establishing priorities for basic scientific research (1/2 page).

  9. Historical Soviet Daily Snow Depth (HSDSD), Version 2

    National Aeronautics and Space Administration — The Historical Soviet Daily Snow Depth (HSDSD) product is based on observations from 284 World Meteorological Organization (WMO) stations throughout Russia and the...

  10. Differences over Economics in the Soviet Leadership, 1988-1990

    Aslund, Anders


    .... It focuses on four central issues: the range of differences on agricultural policy, how to deal with the Soviet Union's financial crisis, what to do about pricing policy, and the overall goal of economic reform...

  11. Beryllium data base for in-pile mockup test on blanket of fusion reactor, (1)

    Kawamura, Hiroshi; Ishitsuka, Etsuo (Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment); Sakamoto, Naoki; Kato, Masakazu; Takatsu, Hideyuki.


    Beryllium has been used in the fusion blanket designs with ceramic breeder as a neutron multiplier to increase the net tritium breeding ratio (TBR). The properties of beryllium, that is physical properties, chemical properties, thermal properties, mechanical properties, nuclear properties, radiation effects, etc. are necessary for the fusion blanket design. However, the properties of beryllium have not been arranged for the fusion blanket design. Therefore, it is indispensable to check and examine the material data of beryllium reported previously. This paper is the first one of the series of papers on beryllium data base, which summarizes the reported material data of beryllium. (author).

  12. Real time simulation method for fast breeder reactors dynamics

    Miki, Tetsushi; Mineo, Yoshiyuki; Ogino, Takamichi; Kishida, Koji; Furuichi, Kenji.


    The development of multi-purpose real time simulator models with suitable plant dynamics was made; these models can be used not only in training operators but also in designing control systems, operation sequences and many other items which must be studied for the development of new type reactors. The prototype fast breeder reactor ''Monju'' is taken as an example. Analysis is made on various factors affecting the accuracy and computer load of its dynamic simulation. A method is presented which determines the optimum number of nodes in distributed systems and time steps. The oscillations due to the numerical instability are observed in the dynamic simulation of evaporators with a small number of nodes, and a method to cancel these oscillations is proposed. It has been verified through the development of plant dynamics simulation codes that these methods can provide efficient real time dynamics models of fast breeder reactors. (author)

  13. The tripartite fast breeder programme: a utility/industry view

    Brandstetter, A.; Eitz, A.W.


    The first phase of fast breeder development in Europe was conducted mainly on an independent basis but from the size of major national RandD programmes the desirability of broadening the basis of participation became evident. In 1968 inter-governmental agreements between Germany, Belgium and Holland led the research centres to enter into cooperation agreements, and utilities and industries to form organisation structures for building and operating breeder power stations with the SNR 300 as prototype. The SNR 300 is a turnkey contract incorporating many commercial features and requiring a firm basis of cooperation between the utility and the manufacturer. It is also subject to very strict licensing procedure. The unique contractual and licensing aspects, and the important consequences of both, are examined. Costs are discussed. The importance of increased collaborate efforts for demonstration plants is stressed and participation agreements relative to Superphenix and SNR-2 are illustrated. (U.K.)

  14. Consideration on risk reduction of future breeder reactors

    Vossebrecker, H.


    An overall concept of risk minimization of future sodium-cooled fast breeder reactors is presented in this report. Since shutdown reliability is of vital importance for the breeder safety, a so-called third shutdown level is proposed in addition to the two independent fast shutdown systems. It is basically a group of passive and active measures, which are capable to bring the reactor to safe conditions in all conceivable accident-initiating events and in case of total failure of the two actual shutdown systems. Core disruptions as a result of shutdown failure are therefore beyond the scope of technical imagination. Measures are also foreseen to combat other conceivable causes of core disruption, in particular to achieve residual heat removal with essentially passive systems by making use of the good natural circulation capacity of sodium. On top of that, since absolute safety can never be claimed, damage-limiting containment measures are discussed

  15. Test reactor: basic to U.S. breeder reactor development

    Miller, B.J.; Harness, A.J.


    Long-range energy planning in the U. S. includes development of a national commercial breeder reactor program. U. S. development of the LMFBR is following a conservative sequence of extensive technology development through use of test reactors and demonstration plants prior to construction of commercial plants. Because materials and fuel technology development is considered the first vital step in this sequence, initial U. S. efforts have been directed to the design and construction of a unique test reactor. The Fast Flux Test Facility, FFTF, is a 400 MW(t) reactor with driver fuel locations, open test locations, and closed loops for higher risk experiments. The FFTF will provide a prototypic LMFBR core environment with sufficient instrumentation for detailed core environmental characterization and a testing capability substituted for breeder capability. The unique comprehensive fuel and materials testing capability of the FFTF will be key to achieving long-range objectives of increased power density, improved breeding gain and shorter doubling times. (auth)

  16. Past and present role of fast breeder reactors in Italy

    Castelli, G.; Cicognani, G.; Ghilardotti, G.; Musso, B.


    The paper describes the programme that is under development in Italy for fast breeder reactors. The Italian engagement in the construction of the Creys-Malville plant is discussed as well as the work at present under way in R and D activities and on the PEC reactor. The roles of the different organizations involved in the fast breeder reactor programme are also considered with particular attention to the activities carried out by AGIP NUCLEARE, CNEN, ENEL, NIRA and by the manufacturing companies. An overall picture of the different agreements between European countries is also given with reference to the construction of the Creys-Malville plant and to research and industrial development activities. (author)

  17. Conceptual design of Indian molten salt breeder reactor

    Vijayan, P.K.; Basak, A.; Dulera, I.V.; Vaze, K.K.; Basu, S.; Sinha, R.K.


    The fuel in a molten salt breeder reactor is in the form of a continuously circulating molten salt. Fluoride based salts have been almost universally proposed. A crucial part for achieving reasonable breeding in such reactors is the need to reprocess the salt continuously, either online or in batch mode. This constitutes a major technological challenge for this type of reactors. India has recently started carrying out fundamental studies so as to arrive at a conceptual design of Indian Molten Salt Breeder Reactor (IMSBR). Presently various design options and possibilities are being studied from the point of view of reactor physics and thermal hydraulic design. In parallel fundamental studies as regards various molten salts have also been initiated. This paper would discuss conceptual design of these reactors, as well as associated issues and technologies

  18. Role of the breeder in long-term energy economics

    Kosobud, R.F.; Daly, T.A.; Chang, Y.I.


    Private and public decisions affecting the use of nuclear and other energy technologies over a long-run time horizon were studied using the ETA-MACRO model which provides for economic- and energy-sector interactions. The impact on the use of competing energy technologies of a public decision to apply benefit-cost analysis to the production of carbon dioxide that enters the atmosphere is considered. Assuming the public choice is to impose an appropriate penalty tax on those technologies which generate CO 2 and to allow decentralized private decisions to choose the optimal mix of energy technologies that maximize a nonlinear objective function subject to constraints, the study showed that breeder technology provides a much-larger share of domestically consumed energy. Having the breeder technology available as a substitute permits control of CO 2 without significant reductions in consumption or gross national product growth paths

  19. The French liquid metal fast breeder reactor programme

    Rapin, M.


    The strong French LMFBR development and the corresponding success obtained up to now show that there is no technical insuperable barrier to fast breeder construction. This satisfactory evolution is in fact the conjunction of a strong incentive due to the lack of other resources, a firm and permanent stand of the government, and an obstinate effort of all the teams involved in the LMFBR field. The changeover to industrial level should be helped by the simplicity of the French organization for fast breeder. Finally, the development of LMFBR on a larger scale is helped by international agreements through which the present French know-how can be put at the disposal of other partners, and the general knowledge can be improved by setting common R and D programmes. A quite successful example of such agreements is given by the German-French agreement, and we hope that new partners will join us soon. (orig.) [de

  20. Filbe molten salt research for tritium breeder applications

    Anderl, R.A.; Petti, D.A.; Smolik, G.R.


    This paper presents an overview of Flibe (2Lif·BeF 2 ) molten salt research activities conducted at the INEEL as part of the Japan-US JUPITER-II joint research program. The research focuses on tritium/chemistry issues for self-cooled Flibe tritium breeder applications and includes the following activities: (1) Flibe preparation, purification, characterization and handling, (2) development and testing of REDOX strategies for containment material corrosion control, (3) tritium behavior and management in Flibe breeder systems, and (4) safety testing (e.g., mobilization of Flibe during accident scenarios). This paper describes the laboratory systems developed to support these research activities and summarizes key results of this work to date. (author)

  1. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    Riber, Anja Brinch; Jong, Ingrid de; van de Werd, Heleen A.


    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types...... of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements...... in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms...

  2. Solid breeder test blanket module design and analysis

    Ying, A. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States)]. E-mail:; Abdou, M. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); Calderoni, P. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); Sharafat, S. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); Youssef, M. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); An, Z. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); Abou-Sena, A. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); Kim, E. [University of California Los Angeles, Los Angeles, CA 90095-1597 (United States); Reyes, S. [LANL, Livermore, CA (United States); Willms, S. [LANL, Los Alamos, NM (United States); Kurtz, R. [PNNL, Richland, WA (United States)


    This paper presents the design and analysis for the US ITER solid breeder blanket test articles. Objectives of solid breeder blanket testing during the first phase of the ITER operation focus on exploration of fusion break-in phenomena and configuration scoping. Specific emphasis is placed on first wall structural response, evaluation of neutronic parameters, assessment of thermomechanical behavior and characterization of tritium release. The tests will be conducted with three unit cell arrays/sub-modules. The development approach includes: (1) design the unit cell/sub-module for low temperature operations and (2) refer to a reactor blanket design and use engineering scaling to reproduce key parameters under ITER wall loading conditions, so that phenomena under investigation can be measured at a reactor-like level.

  3. Fast breeder reactors: Experience and trends. V. 2


    The IAEA Symposium on ''Fast Breeder Reactors: Experience and Future Trends'' was held, at the invitation of the Government of France, in Lyons, France, on 22-26 July 1985. It was hosted by the French Commissariat a l'energie atomique and Electricite de France. The purpose of the Symposium was to review the experience gained so far in the field of LMFBRs, taking into account the constructional, operational, technological, economic and fuel cycle aspects, and to consider the developmental trends as well as the international co-operation in fast breeder reactor design and utilization. The Symposium was attended by almost 400 participants (340 participants, 35 observers and 20 journalists) from 25 countries and five international organizations. More than 80 papers were presented and discussed during six regular sessions and four poster sessions. A separate abstract was prepared for each of these papers

  4. Project of a binary breeder reactor and its inherent safety

    Nascimento, J.A. do; Dias, A.F.; Ishiguro, Y.


    A core layout for the binary breeder reactor (BBR) is developed based on the results of preliminary burnup calculations. The apparent breeding ratio, in the U 233 /Th fueled inner core, is low due to the accumulation of Pa-233 in the first few months of operation. The loss of reactivity during this time is around 3%. The BBR requires more reactivity control than Pu/U-fueled LMFBRs and the core layout developed has 19 control rod assemblies in the inner core. Three aspects related to the inherent safety of the Binary Breeder Reactor have been studied: the radial distribution of the sodium-void reactivity zone-wise Doppler reactivity and the fractions of delayed neutrons. The results show excellent characteristics for the BRB safety. (Author) [pt

  5. Radioactive waste management at a Liquid Metal Fast Breeder Reactor

    Abrams, C.S.; Fryer, R.H.; Witbeck, L.C.


    This paper presents the radioactive waste production and management at a Liquid Metal Fast Breeder Reactor-II (EBR-II), which is operated for the US Department of Energy by the Argonne National Laboratory at the Idaho National Engineering Laboratory (INEL). Since this facility, in addition to supplying power has been used to demonstrate the breeder, fuel cycling, and recently operations with defective fuel elements, various categories of waste have been handled safely over some 14 years of operation. Liquid wastes are processed such that the resulting effluent can be discharged to an uncontrolled area. Solid wastes up to 10,000 R/hr are packaged and shipped contamination-free to a disposal site or interim storage with exposures to personnel approximately 10 mrem. Gaseous waste discharges are low such as 143 Ci of noble gases in 1978 and do not have a significant effect on the environment even with operations with breached fuel

  6. Feasibility study on the thorium fueled boiling water breeder reactor

    PetrusTakaki, N.


    The feasibility of (Th,U)O 2 fueled, boiling water breeder reactor based on conventional BWR technology has been studied. In order to determine the potential use of water cooled thorium reactor as a competitive breeder, this study evaluated criticality, breeding and void reactivity coefficient in response to changes made in MFR and fissile enrichments. The result of the study shows that while using light water as moderator, low moderator to fuel volume ratio (MFR=0.5), it was possible to breed fissile fuel in negative void reactivity condition. However the burnup value was lower than the value of the current LWR. On the other hand, heavy water cooled reactor shows relatively wider feasible breeding region, which lead into possibility of designing a core having better neutronic and economic performance than light water with negative void reactivity coefficient. (authors)

  7. JPRS Report, Soviet Union, The Working Class & The Contemporary World.


    Beatles and Rolling Stones groups, the astronaut J. Glenn, Dzh. (sic) Eisenhower and J. Kennedy, M.L. King and the screen actor M. Brando. At the ...JPRS-UWC-87-002 15 October 1987 FOREIGN BROADCAST INFORMATION SERVICE JPRS Report— Soviet Union THE WORKING CLASS & THE CONTEMPORARY WORLD...MmmKmoN STATEMENT A 19980714 146 mcWAUTtmBPBVmi Soviet Union The Working Class & The Contemporary World No 3, May-June 1987 JPRS-UWC-87-002

  8. Soviet civil defense plans make nuclear war winnable

    Goure, L.


    In this paper, the author expresses his opinion that the U.S. is naive and suicidal in its lack of civil defense preparation for nuclear war. The Soviets' extensive civil defense planning is evidence that they plan to use their nuclear weapons and survive a counterattack by the U.S. The author compares the two systems and explains why the Soviets' system is superior


    Еlena А. Hudorenko


    Full Text Available The article provides analysis of historical retrospective of integrationprocesses in former Soviet Union, ways and opportunities for furtherdevelopment thereof.The authors make a study of the problems of development and functioningof Eurasian cooperation, the effectiveness of interaction with certain states,analyze the reasons of failures, emphasize the achievements results ofcooperation, point out the opportunities for integration processes betweendifferent CIS and provide practical recommendations for effectiveness thereof in former Soviet Union.

  10. Text of the joint U.S.-Soviet summit statement


    The document reproduces the text of the joint U.S.-Soviet summit statement issued on 10 December 1987 at the conclusion of the meeting between the President of the United States and the General Secretary of the Central Committee of the Communist Party of the Soviet Union (Washington, December 7-10, 1987). It refers to the arms control (including nuclear weapons), human rights and humanitarian concerns, regional issues, bilateral affairs and further meetings

  11. Soviet Policy Toward Western Europe Objectives, Instruments, Results.


    Hellenic Socialist Move- ment ( PASOK ) and the development of ties between its left wing and the Greek Communist party (KKE). Before PASOK won an...absolute majority in the June 1985 elections, the Soviets may have hoped for the formation of a PASOK -KKE coalition or, more likely, an arrange- ment...whereby a minority PASOK government would remain in power with tacit Communist support. Although these expectations were not fulfilled, the Soviets expect

  12. Soviet command and control in a historical context

    Kern, Jeffrey A.


    Approved for public release; distribution is unlimited An examination is made of the historical antecedents of present day command and control doctrine in the Soviet Union. The continuity of principal characteristics is demonstrated. The ideological determinants shaping the command and control system are first developed. These include centralism, collective decision-making, unity of command, and redundancy. Practical consequences of these are explored. The functioning of Soviet command...

  13. Toward a Profile of Soviet Behavior in International Financial Markets,


    duv. priding a hedge against both economic and political uncertaintv. l’oitical developments could cut oft Soviet access t(I Western credit marktt...deposits than heyc were paying on their loans, and this simple arbitrage operatio)n would have been p~rofitable. Opportunities for this kind of...8217 arbitrage miay’ hake persisted into 1985. when interest rates on short -term deposits finally% t’ell below the rates that the Soviet U nion would have been

  14. Who's bound by the former Soviet Union's arms control treaties?

    Rhinelander, J.B.; Bunn, G.


    A crucial issue raised by the disintegration of the Soviet central government is what happens to Soviet arms control obligations. As the Soviet government transforms or collapses in the wake of the failed August coup, which of the resulting entities will be bound by the treaties the Soviet Union entered into? Under international law, the obligations of a state are not affected by even such dramatic changes in government. No one yet knows, however, what the end result of the ongoing devolution of power in the erstwhile Soviet Union will be. As illustrations of what could happen to Soviet arms control obligations - not predictions of the future - the authors pose two alternative scenarios. In the first, they assume that most of the current 12 republics, including all of the big four where substantial nuclear forces and the largest conventional forces are located (Russia, Ukraine, Khazakhstan, and Belarus), ultimately form a loose confederation with sufficient central authority to be called a nation-state and to carry out the essence of Soviet obligations under major arms control treaties. In the second, they assume that the union disintegrates further, with these four key republics seceding entirely and recognizing one another as independent states - a step which is apparently one of the US criteria for granting its own recognition. In this scenario, the Russian republic maintains its basic territory and replaces the central government as the power center for military and foreign affairs. In each of these cases, they will describe the general issues affecting the Soviet Union's international obligations, and consider specifically the two most important arms control agreements now in force - the multilateral nuclear Non-proliferation Treaty (NPT) and the bilateral Antiballistic Missile (ABM) Treaty

  15. The Role of Women in the Soviet Armed Forces


    she would stereotype Soviet women, she stated: " Overworked , unhappy with their lives-- standing in lines, taking care of the kids, alcoholism among men...Greece, The Netherlands, Turkey, Israel and Japan . There was no mention of the Soviet Union. Based upon a January 1991 query to the Women’s Research and...1986-1990 due to accidents, suicide and hazing. The group asked the military prosecutor to investigate the abuses within the armed forces, especially

  16. The Soviet Withdrawal from Eastern Europe: A Move in Crisis


    head." A roof indeed! These dwellings back in the Soviet Union have been referred to as " prefabricated huts." Dozens of accounts lament that servicemen... prefabricated hostels. The head of the Defense Ministry estimates that fifty percent of the homeless are thus quartered: thirty percent have returned to...for 220,000 tons of fuel, garages for motor vehicles, 149 barracks, and 66 canteens. Soviet officials estimate that these facilities are wort- abut

  17. Geopolitics: The Key to Understanding Soviet Regional Behavior.


    Soviet foreign policy. nertnngthis role, CO can begin to build a usable theoretical framwork for analyzing Soviet behavior in, utategiczlly inportant...the writings of the great geopolitical theorists, such as Mackinder, Spykman, and Gray, in developing a conceptual basis for understanding the la-tem...Histary,- British geographer Sir Halford J. mdcinder provided the conceptual framewrk for geopolitical theory by dividing the world into three vast regions

  18. Is Soviet society fit for the nuclear age

    Kemeny, L.G.


    The author argues that the Kremlin's handling of the Chernobyl crisis is a far greater indictment of Soviet ethos, society and ideology than their technology. The Soviet nuclear plan is seen to be to press on regardless of safety standards. Australia's government and society, through poor education, foreign disinformation and media orchestration, are unable to participate effectively in the responsibilities of a global nuclear society

  19. Status of national programmes on fast breeder reactors


    The present document contains information on the status of fast breeder reactor development and on worldwide activities in this advanced nuclear power technology during 1990 as reported at the 24th meeting of the IWGFR in Tsuruga, Japan, 15-18 April 1991. The publication is intended to provide information regarding the current status of LMFBR development in IAEA Member States and CEC. Figs and tabs

  20. Status of national programmes on fast breeder reactors


    The present document contains information on the status of fast breeder reactor development and on worldwide activities in this advanced nuclear power technology during 1989 as reported at the 23rd meeting of the IWGFR in Vienna, April 1990. The publication is intended to provide information regarding the current status of LMFBR development in IAEA Member States. A separate abstract was prepared for each of the 11 papers presented by the participants of this meeting. Refs, figs and tabs

  1. Thermal properties and application of potential lithium silicate breeder materials

    Skokan, A.; Wedemeyer, H.; Vollath, D.; Gunther, E.


    Phase relations, thermal stability and preparation methods of the Li 2 O-rich silicates Li 8 SiO 6 and ''Li 6 SiO 5 '' have been investigated experimentally, the application of these compounds as solid breeder materials is discussed. In the second part of this contribution, the results of thermal expansion measurements on the silicates Li 2 SiO 3 , Li 4 SiO 4 and Li 8 SiO 6 are presented

  2. Thermal properties and application of potential lithium silicate breeder materials

    Skokan, A.; Wedemeyer, H.; Vollath, D.; Guenther, E.


    Phase relations, thermal stability and preparation methods of the Li 2 O-rich silicates Li 8 SiO 6 and 'Li 6 SiO 5 ' have been investigated experimentally, the application of these compounds as solid breeder materials is discussed. In the second part of this contribution, the results of thermal expansion measurements on the silicates Li 2 SiO 3 , Li 4 SiO 4 and Li 8 SiO 6 are presented. (author)

  3. Evaluation of organic moderator/coolants for fusion breeder blankets

    Romero, J.B.


    Organic coolants have several attractive features for fusion breeder blanket design. Their apparent compatibility with lithium and their ideal physical and nuclear properties allows straight-forward, high performance designs. Radiolytic damage can be reduced to about the same order as comparable fission systems by using multiplier/stripper blanket designs. Tritium recovery from the organic should be straightforward, but additional data is needed to make a better assessment of the economics of the process

  4. Some basic concepts of fast breeder reactor safeguards

    Tkharev, E.; Walford, F.J.


    The range of discussion topics of this report is restricted to a few key areas of safeguards importance at Fast Breeder Reactors (FBR) only. The differences between thermal and fast reactors that may have safeguards significance in the case of FBRs are listed. The FBR principles of design are mentioned. The relevant safeguards objectives and criteria are given. The fundamental issues for safeguarding FBR are treated. An outline safeguards approach is presented. Model inspection activities are mentioned. 4 figs

  5. Haemorrhagic enteritis seroconversion in turkey breeders: field observations

    Raffaella Ceruti


    Full Text Available Seroconversion to viral haemorrhagic enteritis (HE was studied in seven flocks of turkey breeders (17.974 birds in total, after 20 weeks of the onset of egg production. They showed no clinical signs, and mortality rate was normal. However, the infection caused a drop in egg production lasting about five weeks (-2.32 eggs laid during this period, but had no effect on hatching parameters.

  6. Apparatus for power and breeding distribution measurements in breeder reactors

    Goldstein, N.P.; Sun, K.H.


    A detection system is disclosed herein for the measurement of power and breeding distribution inside a breeder reactor. Small diameter BeO balls comprising oxides of 235 U and 238 U are inserted into the reactor for activation and withdrawn to be counted in a Ge(Li) counter. Measurements of the activated fission and 239 Np gamma rays yield the desired distributions. (Official Gazette)

  7. Tritium inventory and permeation in liquid breeder blankets

    Reiter, F.


    This report reviews studies of the transport of hydrogen isotopes in the DEMO relevant water-cooled Pb-17Li blanket to be tested in NET and in a self-cooled blanket which uses Pb-17Li or Flibe as a liquid breeder material and V or Fe as a first wall material. The time dependences of tritium inventory and permeation in these blankets and of deuterium and tritium recycling in the self-cooled blanket are presented and discussed

  8. Lithium ceramics as the solid breeder material in fusion reactors

    Hollenberg, G.W.; Reuther, T.C.; Johnson, C.E.


    Fusion blanket designs have for almost a decade considered the use of a solid breeder relying on available data and assumed performance. The conclusion from these studies is that acceptable neutronic and thermal hydraulic performance can be achieved. In the future, it will be necessary to establish that a particular material can tolerate the thermal and irradiation environment of the fusion blanket while still providing the required functions of tritium recovery, power production and neutron shielding

  9. Status of national programmes on fast breeder reactors


    The twenty-second Annual Meeting of the International Working Group on Fast Reactors took place in Vienna, 18-21 April 1989. Nineteen representatives from twelve Member States and International Organizations attended the Meeting. This publication is a collection of presentations in which the participants reported the status of their national programmes on fast breeder reactors. A separate abstract was prepared for each of the twelve papers from this collections. Refs, figs, tabs and 1 graph

  10. Fast breeder reactors: can we learn from experience

    Keck, O.


    An economic analysis of FBRs, in particular the long-term benefits to be expected, with reference to the experience of the West German fast breeder reactor programme suggests ways of bringing more realism into governmental decisions on the development of new reactor types. It is suggested that if reactor manufacturers and utilities financed commercial-size demonstration plants from their own funds, then the government would get more realistic advice. (U.K.)

  11. Kimchi, seaweed, and seasoned carrot in the Soviet culinary culture: the spread of Korean food in the Soviet Union and Korean diaspora

    Changzoo Song


    Full Text Available The half-million Soviet Koreans (or Koryŏ saram in the former Soviet Union are the descendants of the ethnic Koreans who migrated to the Russian Far East in the late 19th and early 20th centuries from the northern parts of the Korean peninsula. Their settlements were established in the wide areas of the Russian Far East, including the urban areas around Vladivostok. They were, however, forced-migrated to Central Asia in late 1937 under Stalin's rule. From Central Asia, these Soviet Koreans were further dispersed to other parts of the Soviet Union in the post-Stalin era. These multiple dispersions of Soviet Koreans not only transformed their culinary habit, but also helped Korean food spread among the peoples of the Soviet Union. As a result, Korean food, such as kimchi, miyŏk (edible kelp, and others, were introduced and widely consumed throughout the Soviet Union. This paper explores this unusual spread and popularity of Korean food in the Soviet Union, focusing on the migration history of the Soviet Koreans and Soviet culinary culture. This work is based on the author's fieldwork in the Soviet Union in the early 1900s and again in mid-2000s. The unusual diffusion and popularity of the Korean food in the former Soviet Union provides us with important insights on migration and globalization of ethnic food.

  12. Breeding nuclear fuels with accelerators: replacement for breeder reactors

    Grand, P.; Takahashi, H.


    One application of high energy particle accelerators has been, and still is, the production of nuclear fuel for the nuclear energy industry; tantalizing because it would create a whole new industry. This approach to producing fissile from fertile material was first considered in the early 1950's in the context of the nuclear weapons program. A considerable development effort was expended before discovery of uranium ore in New Mexico put an end to the project. Later, US commitment to the Liquid Metal Fast Breeder Reactors (LMFBR) killed any further interest in pursuing accelerator breeder technology. Interest in the application of accelerators to breed nuclear fuels, and possibly burn nuclear wastes, revived in the late 1970's, when the LMFBR came under attack during the Carter administration. This period gave the opportunity to revisit the concept in view of the present state of the technology. This evaluation and the extensive calculational modeling of target designs that have been carried out are promising. In fact, a nuclear fuel cycle of Light Water Reactors and Accelerator Breeders is competitive to that of the LMFBR. At this time, however, the relative abundance of uranium reserves vs electricity demand and projected growth rate render this study purely academic. It will be for the next generation of accelerator builders to demonstate the competitiveness of this technology versus that of other nuclear fuel cycles, such as LMFBR's or Fusion Hybrid systems. 22 references, 1 figure, 5 tables

  13. Philosophy of safety evaluation on fast breeder reactor


    This is the report submitted from the special subcommittee on reactor safety standard to the Nuclear Safety Commission on October 14, 1980, and it was decided to temporarily apply this concept to the safety examination on fast breeder reactors. The examination and discussion of this report were performed by taking the prototype reactor ''Monju'' into consideration, which is to be the present target, referring to the philosophy of the safety evaluation on fast breeder reactors in foreign countries and based on the experiences in the fast experimental reactor ''Joyo''. The items applicable to the safety evaluation for liquid metal-cooled fast breeder reactors (LMFBR) as they are among the existing safety examination guidelines are applied. In addition to the existing guidelines, the report describes the matters to be considered specifically for core, fuel, sodium, sodium void, reactor shut-down system, reactor coolant boundary, cover gas boundary and others, intermediate cooling system, removal of decay heat, containment vessels, high temperature structures, and aseismatic property in the safety design of LMFBR's. For the safety evaluation for LMFBR's, the abnormal transient changes in operation and the phenomena to be evaluated as accidents are enumerated. In order to judge the propriety of the criteria of locating LMFBR facilities, the serious and hypothetical accidents are decided to be evaluated in accordance with the guideline for reactor location investigation. (Wakatsuki, Y.)

  14. Dounreay: more is at stake than just the fast breeder

    Holmes, A.


    The British government's policy on nuclear power is to support and encourage an expansion of the nuclear energy programme. However, the Conservative government has said it will withdraw its funding from the fast breeder reactor research programme based at Dounreay in Scotland. Once the Electricity supply industry has been privatised it will not finance the fast breeder reactor programme either. So it seems likely that the research will be discontinued after 5 years and the reprocessing plant planned for Dounreay will never be built. This highlights the basic ambiguity that has existed for a long time over the fast breeder programme and has forced a decision. A similar problem exists generally with the United Kingdom Atomic Energy Authority which has continued to thrive despite many failures. The reasons for this are explained. Privatisation may be the spur to the demise of the UKAEA so it no longer enjoys such a favoured position. The decision to kill off the FBR is just one consequence of this. Others may be a change of attitude to the decommissioning of the Windscale prototype advanced gas cooled reactor, and the fusion project, including JET. (U.K.)

  15. Present status of the Liquid Breeder Validation Module for IFMIF

    Casal, Natalia; Mas, Avelino; Mota, Fernando; García, Ángela; Rapisarda, David; Nomen, Oriol; Arroyo, Jose Manuel; Abal, Javier; Mollá, Joaquín; Ibarra, Ángel


    Highlights: • The LBVM will be used to perform irradiation experiments on functional materials for fusion reactors. • It houses 16 experimental rigs, each one containing a EUROFER capsule partially filled with lithium lead, at 300–550 °C. • A helium purge gas will sweep the tritium permeated through the capsule walls to a tritium measuring station. • A helium cooling system will keep tritium diffusion within safe margins and guarantee its mechanical integrity. • Thermal hydraulic and mechanical calculations, the module instrumentation and aspects as safety or RAMI are presented. -- Abstract: One of the objectives of IFMIF (International Fusion Materials Irradiation Facility), as stated in its specifications, is the validation of breeder blanket concepts for DEMO design. The so-called Liquid Breeder Validation Module (LBVM) will be used in IFMIF to perform experiments under irradiation on functional materials related to liquid breeder concepts for future fusion reactors. This module, not considered in previous IFMIF design phases, is currently under design by CIEMAT in the framework of the IFMIF/EVEDA project. In this paper, the present status of the design of the LBVM is presented

  16. Present status of the Liquid Breeder Validation Module for IFMIF

    Casal, Natalia, E-mail: [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain); Mas, Avelino; Mota, Fernando; García, Ángela; Rapisarda, David [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain); Nomen, Oriol [Institut de Recerca en Energia de Catalunya (IREC), Barcelona (Spain); Centre de Disseny d’Equips Industrials (CDEI), Technical University of Catalonia (UPC), Barcelona (Spain); Arroyo, Jose Manuel [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain); Abal, Javier [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Mollá, Joaquín; Ibarra, Ángel [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain)


    Highlights: • The LBVM will be used to perform irradiation experiments on functional materials for fusion reactors. • It houses 16 experimental rigs, each one containing a EUROFER capsule partially filled with lithium lead, at 300–550 °C. • A helium purge gas will sweep the tritium permeated through the capsule walls to a tritium measuring station. • A helium cooling system will keep tritium diffusion within safe margins and guarantee its mechanical integrity. • Thermal hydraulic and mechanical calculations, the module instrumentation and aspects as safety or RAMI are presented. -- Abstract: One of the objectives of IFMIF (International Fusion Materials Irradiation Facility), as stated in its specifications, is the validation of breeder blanket concepts for DEMO design. The so-called Liquid Breeder Validation Module (LBVM) will be used in IFMIF to perform experiments under irradiation on functional materials related to liquid breeder concepts for future fusion reactors. This module, not considered in previous IFMIF design phases, is currently under design by CIEMAT in the framework of the IFMIF/EVEDA project. In this paper, the present status of the design of the LBVM is presented.

  17. Production aspects of broiler breeders submitted to different drinker types

    LP Colvero


    Full Text Available The objective of this study was of evaluate the influence of different drinker types on the egg production, water intake, mortality, poultry litter relative humidity, egg weight, eggshell percentage, and egg specific gravity of broiler breeders. The experiment was carried out in a commercial farm with 37- to 44-wk-old broiler breeders. A randomized block experimental design, consisting of two treatments (bell or nipple drinkers with four replicates of 4.000 females each, was applied. Data were submitted to analysis of variance, and means were compared by the test of Student-Newman-Keuls at 5% significance level. Birds submitted to nipple drinkers presented lower water intake (p0.05 of drinker type on egg production or mortality. Poultry litter relative humidity was lower (p<0.05 under the nipple-drinker system. Birds drinking from bell drinkers produced heavier eggs (p<0.05 between weeks 39 and 40. Hens drinking from bell drinkers laid eggs with higher specific gravity and eggshell percentage. It was concluded that nipple drinkers can be used for broiler breeders during lay.

  18. Progress in tritium retention and release modeling for ceramic breeders

    Raffray, A.R.; Federici, G.; Billone, M.C.; Tanaka, S.


    Tritium behavior in ceramic breeder blankets is a key design issue for this class of blanket because of its impact on safety and fuel self-sufficiency. Over the past 10-15 years, substantial theoretical and experimental efforts have been dedicated world-wide to develop a better understanding of tritium transport in ceramic breeders. Models that are available today seem to cover reasonably well all the key physical transport and trapping mechanisms. They have allowed for reasonable interpretation and reproduction of experimental data and have helped in pointing out deficiencies in material property data base, in providing guidance for future experiments, and in analyzing blanket tritium behavior. This paper highlights the progress in tritium modeling over the last decade. Key tritium transport mechanisms are briefly described along with the more recent and sophisticated models developed to help understand them. Recent experimental data are highlighted and model calibration and validation discussed. Finally, example applications to blanket cases are shown as illustration of progress in the prediction of ceramic breeder blanket tritium inventory


    Bajoraite, Alma


    Full Text Available The Soviet occupation and their ideology brought to Lithuania a new poster quality. The paper analyzes the problem of posters propaganda and manipulation, the inheritance of the not traditional documents and their inventory. The goal of this paper is to analyze the soviet posters in Lithuania in 1940–1953.The principal problems of this paper are to research the formation and the domination of the posters in Lithuania: which role they had in the politics. The paper also analyzes the soviet posters impact on farming and their influence to the society.To sum up, the new trend of art appeared in 1940 in Lithuania, which had the principal goal to propagate the soviet ideology in all the political and social spheres. The goal of the soviet posters as the media of information was to provide the distorted view of the reality. The soviet posters had dominated in Lithuania in 1940–1953. This period had left a very interesting and rich heritage. It is the importatant part of the cultural and historical heritage.

  20. Soviet Union oil sector outlook grows bleaker still



    This paper reports on the outlook for the U.S.S.R's oil sector which grows increasingly bleak and with it prospects for the Soviet economy. Plunging Soviet oil production and exports have analysts revising near term oil price outlooks, referring to the Soviet oil sector's self-destructing and Soviet oil production in a freefall. County NatWest, Washington, citing likely drops in Soviet oil production and exports (OGJ, Aug. 5, p. 16), has jumped its projected second half spot price for West Texas intermediate crude by about $2 to $22-23/bbl. Smith Barney, New York, forecasts WTI postings at $24-25/bbl this winter, largely because of seasonally strong world oil demand and the continued collapse in Soviet oil production. It estimates the call on oil from the Organization of Petroleum Exporting Countries at more than 25 million b/d in first quarter 1992. That would be the highest level of demand for OPEC oil since 1980, Smith Barney noted

  1. Kant’s Studies in Ukrainian Philosophy of Soviet Period

    Vadym Tytarenko


    Full Text Available This writing is devoted to the brief review of Immanuel Kant’s philosophy studies and receptions of his philosophical concepts within the Ukrainian philosophy of Soviet period. Such attempt is actually pertinent because nowadays we definitely need to reconsider the soviet philosophical heritage for better understanding the real value of any philosophical conclusions and worldview-concerning statements which were made in the times of soviet ideology hegemony. Additionally, mentioned reconsidering is presently urgent because Ukrainian intellectual culture is now looking for its identity and is trying to identify the stillremaining ideological totalitarian elements which spoil the originality and objectiveness of its products. The present review attempts to identify which totalitarian intentions and prejudices were used to interpret and evaluate the Immanuel Kant’s heritage in the texts written by several selected Ukrainian philosophers of the Soviet period. Nevertheless, it’s obvious that absolutely impossible to avoid talking about Georg Wilhelm Friedrich Hegel’s philosophical position interpretation by the same authors. Kant’s and Hegel’s soviet-Ukrainian interpretations were often connected, because there was a general trend of soviet Marxist history of philosophy to interpret Kant as the “worse” version of Hegel. To fulfill the general image of Kant’s philosophy interpretation in Ukrainian philosophy and its future perspectives, this paper also delivers some common information about the whole historical path of Kant’s interpretations and receptions


    Sergey Sergeevich Shaulov


    Full Text Available Soviet literary criticism, especially in the first decades after the 1917 Revolution, was quite biased in its treatment of Dostoevsky and his works. The reasons for this bias lie both inside and outside the sphere of political ideology. We suggest that there exists a genetic link between some Soviet readings of Dostoevsky and a number of interpretations made in the author's lifetime. Also analysed are the attempts to 'domesticate' Dostoevsky and adapt his works to drastically different cultural conditions and political norms. It is indicative that this adaptation has always passed the stage of mythologizing the writer and his works. This mythologization paradoxically became a convergence point for Soviet (Lunacharsky, anti-Soviet (Berdyayev and purely philosophical (Bakhtin readings of Dostoevsky. Ultimately, the central Dostoevsky myth in post-revolutionary Russia was a version of Romantic mythology often directly expressed in comparing Dostoevsky with Prometheus. We also look at the negative readings of Dostoevsky, which construed the author as a certain mythological antagonist of the proletariat as the collective messiah. Such readings (exemplified in our article by Pereverzev's and Livshits' point at the ultimate limit of ethical assessment of Dostoevsky from the standpoint of rational secular humanism and the Soviet humanitarian thought as its version. Dostoevsky's artistic practice incorporates this tradition within the intranovel dialogue as just one of the voices and demonstrates its ethical insufficiency, which in its turn provokes the mixed reaction of 'appropriation' and 'rejection' from both Soviet thinkers and their contemporary heirs.

  3. Population change in the former Soviet Republics.

    Haub, C


    Demographic trends in the former Soviet Republics and Russia are summarized and discussed in this publication. The former Soviet Republics in Europe as well as Georgia and Armenia had completed or almost completed their demographic transition before October 1991. Other Central Asian republics experienced reduced mortality, but, despite rapid declines, fertility is still above replacement level (at 3-4 children per woman). The economic and social dislocation of the breakup of the republics has hastened fertility decline. The annual population growth rate of the USSR in the mid-1980s was 0.9%; this rate declined to 0.4% in 1991, and the decline has continued. The 1991 population of the USSR was 289.1 million. Between 1989 and 1991, the crude birth rate was 18/1000 population, and the crude death rate was 10/1000. The net migration rate of -4/1000 helped to reduce growth. Total fertility in the USSR was 2.3 children in 1990. In Russia, fertility declined from 1.9 in 1990 to 1.4 in 1993. The preferred family size in Russia was 1.9 in 1990 and 1.5 in 1993. This decline occurred due to lack of confidence in the economy and insufficient income. Only 19% of women used contraception in 1990. Marriages declined after 1990. Age pyramids were similar in the republics in that there was a narrowing in the proportion aged 45-49 years, and the male population aged over 65 years was diminished, due to the effect of World War II. The cohort of those aged 20-24 years in 1992 was very small due to the small parental birth cohort. The differences in the republics was characterized as broad-based in the younger ages because of high fertility. The number of childbearing women will remain large. Life expectancy has been 70 years since the 1950s and has declined in some republics due to substandard health care, lack of job safety measures, and alcoholism. Some republics experienced increased life expectancy, but, after 1991, mortality increased. Tajikistan had the highest infant mortality

  4. Experimental investigations at the Soviet tokamaks

    Bobrovskij, G.A.; Golant, V.E.; AN SSSR, Leningrad. Fiziko-Tekhnicheskij Inst.)


    The review is devoted to the basic results obtained on the Soviet tokamaks during 1976-1977. Behaviour of impurities, tearing instability, additional methods of plasma heating, energy distribution function were investigated. A brief description of new T-7, TM-4, ''Tuman-3'' tokamaks is given. It is shown that despite inflow of impurities to the pinch periphery, no their appreciable accumulation is observed at least during the discharge time. It is shown that the helical perturbations with m=2 and 1 present the greatest danger. The suppression of the tearing instability is related with suppression of the mode with m=2. The helical perturbation prevents formation of skin configuration at the initial stage of the discharge. As a rule, the transition of an appreciable fraction of electrons to continuous acceleration does not take place, although a significant deformation of electron distribution function under the action of electric field occurs. Plasma compression by increasing magnetic field induces oscillations and improves thermal plasma isolation. It is shown experimentally that the considerable efficiency of energy contribution to the ion component at the central part of plasma may be obtained by means of HF heating under conditions of low-hybrid resonance. It is shown that the recombination has a considerable effect on concentration of neutral particles in the central region

  5. A plan for Soviet nuclear waste

    Stone, R.


    If environmentalist forces are successful, the Russian government may soon establish the country's first comprehensive program for dealing with nuclear waste. Later this month the Russian parliament, back from its summer recess, is expected to begin considering a bill on this topic. A draft copy indicates that Russia is starting with the basics: It orders the government to develop a means of insulting waste from the environment, to form a national waste processing program, and to create a registry for tracking where spent atomic fuel is stored or buried. The bill comes on the heels of a November 1991 decree by Russian President Boris Yeltsin to step up efforts to deal with nuclear waste issues and to create a government registry of nuclear waste disposal sites by 1 January 1993. The former Soviet Union has come under fire from environmentalists for dumping low- and intermediate-level nuclear wastes in the Arctic Ocean and for improperly storing waste at sites in the southern Urals and Belarus. Adding to the bill's urgency is the fact that Russia is considering sites for underground repositories for high-level waste at Tomsk, Krasnoyarsk, Chelyabinsk, and on the Kola Peninsula

  6. The Soviet contributions towards MAP/WINE

    Rapoport, Z. TA.; Kazimirovsky, E. S.


    In the winter of 1983 to 1984, the research institutes of the Soviet Union took an active part in the accomplishment of the project Winter in Northern Europe (MAP/WINE) of the Middle Atmosphere Program. Different methods were used to measure temperature, direction and velocity of wind, turbulence, electron concentration in the lower ionosphere, and radio wave absorption. The study of the stratopheric warmings and the related changes in the mesosphere and lower ionosphere was considered of special importance. The analysis of the obtained data has shown, in particular, that during the stratospheric warmings the western wind in winter time becomes weaker and even reverses. At the same time period the electron concentration and the radio wave absorption in the lower ionosphere are often reduced. It is also observed that the high absorption zones move from west to east. These results confirm the concept about the role of the cyclonic circumpolar vortex in the transport of the auroral air to temperate latitudes and about the appearance of conditions for the winter anomalous radio wave absorption.

  7. Soviet contributions towards MAP/WINE

    Rapoport, Z. Ts.; Kazimirovsky, E. S.

    In the winter of 1983/1984, the research institutes of the Soviet Union took an active part in the accomplishment of the project ``Winter in Northern Europe'' of the Middle Atmosphere Program (MAP/WINE). Different methods were used to measure temperature, direction and velocity of wind, turbulence, electron density in the lower ionosphere, and radio wave absorption. The study of the stratospheric warmings and the related changes in the mesosphere and lower ionosphere was considered of special importance. The analysis of the obtained data has shown, in particular, that during stratospheric warmings the westerly wind in wintertime becomes weaker and even reverses. At the same time period the electron density and the radio wave absorption in the lower ionosphere are often reduced. It is also observed that the high absorption zones move from west to east. These results confirm the concept about the role of the cyclonic circumpolar vortex in the transport of the auroral air to temperate latitudes and about the appearance of conditions for the winter anomalous radio wave absorption.

  8. The Soviet contributions towards MAP/WINE

    Rapoport, Z. Ta.; Kazimirovsky, E. S.


    In the winter of 1983 to 1984, the research institutes of the Soviet Union took an active part in the accomplishment of the project Winter in Northern Europe (MAP/WINE) of the Middle Atmosphere Program. Different methods were used to measure temperature, direction and velocity of wind, turbulence, electron concentration in the lower ionosphere, and radio wave absorption. The study of the stratopheric warmings and the related changes in the mesosphere and lower ionosphere was considered of special importance. The analysis of the obtained data has shown, in particular, that during the stratospheric warmings the western wind in winter time becomes weaker and even reverses. At the same time period the electron concentration and the radio wave absorption in the lower ionosphere are often reduced. It is also observed that the high absorption zones move from west to east. These results confirm the concept about the role of the cyclonic circumpolar vortex in the transport of the auroral air to temperate latitudes and about the appearance of conditions for the winter anomalous radio wave absorption.

  9. Examination of the use of the breeder reactor to enhance security of energy supply. Final report

    Jones, G.S.; Chow, B.G.


    Early commercialization of the breeder reactor has been justified in terms of its promise for lessening a nation's dependence on imported uranium. The relationship between breeder timing (assuming a vigorous but not instantaneous breeder penetration rate) and the reduction in uranium requirements is examined using Japan as an example. Comparing early and delayed breeder introductions (2006 and 2026 respectively in the high growth projections), the difference in cumulative uranium requirements is slight through the year 2045; for both scenarious, annual requirements remain high. The early breeder introduction strategy is more attractive when it incorporates a 30 percent improved LWR. However, given the unlikelihood of sufficient funding for the development of both designs, the optimal strategy for Japan is stockpiling uranium for an improved LWR and delaying introduction of the breeder

  10. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam

    Veronika Czerwinski


    Full Text Available Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76% reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams

  11. Composite beryllium-ceramics breeder pin elements for a gas cooled solid blanket

    Carre, F.; Chevreau, G.; Gervaise, F.; Proust, E.


    Helium coolant have main advantages compared to water for solid blankets. But limitations exist too and the development of attractive helium cooled blankets based on breeder pin assemblies has been essentially made possible by the derivation from recent CEA neutronic studies of an optimized composite beryllium/ceramics breeder arrangement. Description of the proposed toroidal blanket layout for Net is made together with the analysis of its main performance. Merits of the considered composite Be/ceramics breeder elements are discussed

  12. Progress in the neutronic core conversion (HEU-LEU) analysis of Ghana research reactor-1.

    Anim-Sampong, S.; Maakuu, B. T.; Akaho, E. H. K.; Andam, A.; Liaw, J. J. R.; Matos, J. E.; Nuclear Engineering Division; Ghana Atomic Energy Commission; Kwame Nkrumah Univ. of Science and Technology


    The Ghana Research Reactor-1 (GHARR-1) is a commercial version of the Miniature Neutron Source Reactor (MNSR) and has operated at different power levels since its commissioning in March 1995. As required for all nuclear reactors, neutronic and thermal hydraulic analysis are being performed for the HEU-LEU core conversion studies of the Ghana Research Reactor-1 (GHARR-1) facility, which is a commercial version of the Miniature Neutron Source Reactor (MNSR). Stochastic Monte Carlo particle transport methods and tools (MCNP4c/MCNP5) were used to fine-tune a previously developed 3-D MCNP model of the GHARR-1 facility and perform neutronic analysis of the 90.2% HEU reference and candidate LEU (UO{sub 2}, U{sub 3}Si{sub 2}, U-9Mo) fresh cores with varying enrichments from 12.6%-19.75%. In this paper, the results of the progress made in the Monte Carlo neutronic analysis of the HEU reference and candidate LEU fuels are presented. In particular, a comparative performance assessment of the LEU with respect to neutron flux variations in the fission chamber and experimental irradiation channels are highlighted.

  13. Experiences with fast breeder reactor education in laboratory and short course settings

    Waltar, A.E.


    The breeder reactor industry throughout the world has grown impressively over the last two decades. Despite the uncertainties in some national programs, breeder reactor technology is well established on a global scale. Given the magnitude of this technological undertaking, there has been surprisingly little emphasis on general breeder reactor education - either at the university or laboratory level. Many universities assume the topic too specialized for including appropriate courses in their curriculum - thus leaving students entering the breeder reactor industry to learn almost exclusively from on-the-job experience. The evaluation of four course presentations utilizing visual aids is presented

  14. The Soviet Union and population: theory, problems, and population policy.

    Di Maio, A J


    Until the important public dialog on 3rd World population issues began in the Soviet Uuion in 1965, ideological limitations and bureaucratic interests prevented policy makers from recognizing the existence of a world of national "population problem." Since then, freer discussions of the Soviet Union's surprising decline in birthrate and labor shortages have led to serious policy questions. Conflicting policy goals, however, have resulted in only modest pronatalist policies. The Soviet population problem is a result of interregional disparities in population growth rates between the highly urbanized Soviet European populations with low birth rates and the least urbanized Central Asians with dramatically higher birth rates. As a result, these essentially Muslim people will provide the only major increases in labor resources and an increasing percentage of Soviet armed forces recruits. Policy planners are thus faced with difficult options. Current policies stressing technological transfers from the west and greater labor productivity, however, are unlikely to solve further labor shortages and regional imbalances. Ultimately, nonEuropana regions will be in an improved bargaining position for more favorable nationwide economic policies and for a greater role in policy planning.

  15. Scientific and technical training in the Soviet Union

    Spearman, M. L.


    Specific features and observations on the Soviet educational system and areas of apparent effectiveness are presented, noting that the literacy rate is over 98 percent in 1982. Educational goals are reoriented every five years to match with other projections of five-year plans. The Soviet constitution established strong educational goals, including schools, correspondence courses, lectures in native tongues, free tuition, and vocational training. The educational pattern from pre-school through graduate school lasts over 28 yr and contains two 2-yr periods of work, confined to specialties after graduate school. Mathematics is emphasized, as are physics, Marxism, and a foreign language. Approximately 300,000 engineers were graduated in the Soviet Union in 1982, compared with the 20-yr U.S. average of 50,000/yr. About 2/3 of Soviet engineers participate in defense work, a number which is four times the total number of U.S. engineers. It is asserted that the continual indoctrination, organization, and practical work experience will guarantee that the Soviet state will remain a dominant force in the world as long as centralized state control can be carried out.

  16. Status of French breeder development and German-French cooperation

    Vendryes, G.


    The development of fast breeder reactors in France is at present characterized by the successful operation of the 250 MW reactor, Phenix, and the speedy progress made in construction of the 1200 MW Superphenix plant. The technical concept of Superphenix is a logical extension of the Phenix concept, i.e., the pool type sodium cooled breeder reactor. While the only change in the primary system has been an increase in capacity, the main modification over Phenix is the change from small modular steam generators to four large units. The development of the work to date does not cast any doubt upon the envisaged date of first criticality in the second half of 1982. The basis of German-French cooperation is a joint declaration by the then Ministers for Research of the two countries on February 13, 1976 in which the Ministers had expressed themselves in favor of close cooperation between both countries in the development of safe, reliable and economic fast breeder reactors. On this basis, the two governments, the research centers and the industrial partners in the two countries, including the previous partners in Belgium, the Netherlands and Italy, agreed on the general principles of this cooperation. Meanwhile, the cooperation formalized in 1977 has been activated. Both in research and development and among planning and building industries the exchange of know-how and cooperation is in full swing. The joint company, SERENA, is the pool for the know-how introduced by the partners and the sole representative of the partners in the scheme. (orig.) 891 UA [de

  17. Ochratoxicosis in White Leghorn breeder hens: Production and breeding performance

    Zahoor Ul Hassan*, Muhammad Zargham Khan, Ahrar Khan, Ijaz Javed1, Umer Sadique2 and Aisha Khatoon


    Full Text Available This study was designed to evaluate the effect of Ochratoxin A (OTA upon production and breeding parameters in White Leghorn (WL breeder hens. For this purpose, 84 WL breeder hens were divided into seven groups (A-G. The hens in these groups were maintained on feed contaminated with OTA @ 0.0 (control, 0.1, 0.5, 1.0, 3.0, 5.0 and 10.0 mg/Kg, respectively for 21 days. These hens were artificially inseminated with semen obtained from healthy roosters kept on OTA free feed. Egg production and their quality parameters were recorded. Fertile eggs obtained from each group were set for incubation on weekly basis. At the end of the experiment, hens in each group were killed to determined gross and microscopic lesions in different organs. OTA residue concentrations were determined in extracts of liver, kidneys and breast muscles by immunoaffinity column elution and HPLC-Fluorescent detection techniques. Feeing OTA contaminated diet resulted in a significant decrease in egg mass and egg quality parameters. Liver and kidneys showed characteristic lesions of ochratoxicosis. Residue concentration (ng/g of OTA in the hens fed 10 mg/kg OTA, was the highest in liver (26.336±1.16 followed by kidney (8.223±0.85 and were least in breast muscles (1.235±0.21. Embryonic mortalites were higher, while hatachabilites of the chicks were lower in the groups fed higher doses of OTA. Feeding OTA contaminated diets to breeder hen resulted in residues accumulation in their tissues along with significantly reduced production and breeding performance.

  18. Test measurements on the RF charge breeder device BRIC

    Variale, Vincenzo; Boggia, Antonio; Clauser, Tarcisio; Raino, Antonio; Valentino, Vincenzo; Verrone, Grazia; Bak, Petr; Kustenzov, Gennady; Skarbo, Boris; Tiunov, Michael


    The 'charge state breeder' BRIC (BReeding Ion Charge) is based on an EBIS source and it is designed to accept Radioactive Ion Beam (RIB) with charge state +1, in a slow injection mode, to increase their charge state up to +n. BRIC has been developed at the INFN section of Bari (Italy) during these last 3 years with very limited funds. Now, it has been assembled at the LNL (Italy) where are in progress the first tests as stand alone source and where, in the future, with some implementation, it will be tested as charge breeder at ISOL/TS facility of that laboratory. BRIC could be considered as a solution for the charge state breeder of the SPES project under study also at the LNL. The new feature of BRIC, with respect to the classical EBIS, is given by the insertion, in the ion drift chamber, of a radio frequency (RF) - quadrupole aiming to filter the unwanted masses and then making a more efficient containment of the wanted ions. In this paper, the first ion charge state measurements and analysis and the effect of the RF field applied on the ion chamber will be reported and discussed. The first RF test measurements seem confirm, as foreseen by simulation results carried out previously, that a selective containment can be obtained. However, most accurate measurements needed to study with more details the effect. For this reason, few implementations of the system are in order to improve the accuracy of the measurements. The proposed modifications of the BRIC device, then, will be also presented and shortly discussed

  19. 04 - Sodium cooled fast breeder fourth-generation reactors - The experimental reactor ALLEGRO, the other ways for fast breeder fourth-generation reactors


    The authors first present the technology of gas-cooled fast breeder reactors (basic principles, specific innovations, feasibility studies, fuel element, safety) and notably the ALLEGRO project (design options and expected performances, preliminary safety demonstration). Then, they present the lead-cooled fast-breeder reactor technology: interests and obstacles, return on experience, the issue of lead density, neutron assessment, transmutation potential, dosimetry, safety chemical properties and compatibility with the fuel, water, air and steels. The next part addresses the technology of molten-salt fast-breeder reactors: choice of the liquid fuel and geometry, reactor concept (difficulties, lack of past R and D), demonstration and demonstrators, international context

  20. Optimization of binary breeder reactor V - Binary breeder reactors with two and four zones and a conventional LMFBR - (Pu/U) of two zones

    Dias, A.F.; Ishiguro, Y.


    Comparative analyses of a commercial-size Pu/U-fueled liquid metal fast breeder reactor and two binary breeder reactors with different numbers of enrichment zones have been done. Principal parameters of comparison are safety and breeding characteristics and reactivity losses during an operational cycle. The comparison shows that in a binary breeder reactor, good breeding characteristics in both cycles, Pu/U and U/Th, in addition to a possibility of an efficient utilization of thorium, and superior inherent safety than current LMFBRs can be achieved. (Author) [pt

  1. Breeder design for enhanced performance and safety characteristics

    Fischer, G.J.; Atefi, B.; Yang, J.W.; Galperin, A.; Segev, M.


    A fast breeder reactor design has been created which offers a considerably extended fuel cycle and excellent performance characteristics. An example of a core designed to operate on a ten-year fuel cycle is described in some detail. Use of metal fuel along with a moderator such as beryllium oxide dispersed throughout the core provides both design flexibility and safety advantages such as a strong Doppler feedback and limited sodium void reactivity gain. Local power variations are small for the entire cycle; control requirements are also modest, and fuel cycle costs are low

  2. Safety design study of fast breeder reactors in Japan

    Miura, M.; Inagaki, T.


    This paper reports on two fast breeder reactor (FBR) concepts, the tank type and the loop type, that have been studied as possible reactor designs to be used for a demonstration FBR (DFBR). The basic principle fo the DFBR design is to ensure plant safety through a defense-in-depth methodology. Improvements in the seismic and thermal stress designs have been attempted for both reactor concepts. The system design study strives to maximize the reliability of the safety-related systems and to rationalize commercialization of the plant

  3. Overview of EU activities on DEMO liquid metal breeder blanket

    Giancarli, L.; Proust, E.; Malang, S.; Reimann, J.; Perujo, A.


    The present paper gives an overview of both design and experimental activities within the European Union (EU) concerning the development of liquid metal breeder blankets for DEMO. After several years of studies on breeding blankets, two blanket concepts are presently considered, both using the eutectic Pb-17Li: the dual-coolant concept and the water-cooled concept. The analysis of such concepts has permitted to identify the experimental areas where further data are required. Tritium control and MHD-issues are, at present, the activities on which is devoted the greatest effort within the EU. (authors). 4 figs., 4 tabs., 39 refs

  4. Tritium transport and release from lithium ceramic breeder materials

    Johnson, C.E.; Kopasz, J.P.; Tam, S.W.


    In an operating fusion reactor,, the tritium breeding blanket will reach a condition in which the tritium release rate equals the production rate. The tritium release rate must be fast enough that the tritium inventory in the blanket does not become excessive. Slow tritium release will result in a large tritium inventory, which is unacceptable from both economic and safety viewpoints As a consequence, considerable effort has been devoted to understanding the tritium release mechanism from ceramic breeders and beryllium neutron multipliers through theoretical, laboratory, and in-reactor studies. This information is being applied to the development of models for predicting tritium release for various blanket operating conditions

  5. Calculation of the evolution of molten salt breeder reactor

    Esteves, Fernando de Avelar


    A forecast for the future electrical consumption in Brazil and forecast of the nuclear electrical generation demand are discussed in this paper, which includes also an analysis on advanced nuclear reactors concept to supply that demand. This paper presents a concise description of the Molten Salt Breeder Reactor, considered the most appropriated to meet that demand. This paper also presents the burnup calculation modeling, including the operation modeling of this type of reactor from an initial load o 233 U up to the equilibrium cycle, the results of these calculations and its analysis. (author)

  6. Refueling system for the gas-cooled fast breeder reactor

    Hawke, B.C.


    Criteria specifically related to the handling of Gas-Cooled Fast Breeder Reactor (GCFR) fuel are briefly reviewed, and the most significant requirements with which the refueling system must comply are discussed. Each component of the refueling system is identified, and a functional description of the fuel handling machine is presented. An illustrated operating sequence describing the various functions involved in a typical refueling cycle is presented. The design status of components and subsystems selected for conceptual development is reviewed, and anticipated refueling time frames are given

  7. Liquid Li-Pb-Bi, a new tritium breeder

    Rogers, A.G.; Benedict, B.L.; Clemmer, R.G.


    In light of their potential utility as tritium breeder-blanket materials, a study was conducted to identify and characterize low-melting phases in the lithium-lead-bismuth system. It is found that a low-melting ternary phase field did in fact exist, e.g., compositions with less than or equal to 20 atom percent lithium and Pb/Bi = 0.773 melted at or below 140 0 C. In addition, the qualitative reactivity of Li-Bi-Pb alloys with water was tested, and although minimal evidence of exothermic chemical reaction was observed, a physical vapor explosion did occur in one of the tests

  8. Challenges and achievements - Prototype Fast Breeder Reactor construction

    Subramani, V.A.; Dhere, S.S.; Manoharan, V.; Subbaraman, P.


    Prototype fast breeder reactor presently under construction poses several challenges in materials, design and construction. The civil structure and equipment are of very large size and complex in nature. This paper presents the features of the design and construction of the PFBR excavation, raft, civil structure of the nuclear island connected buildings and reactor vault. This paper also brings out the details of the large size equipment of special stainless steel and handling structure for their lifting and placement inside the reactor vault. The paper is divided into three parts viz. introduction, challenges and achievements during construction of civil structures and erection of large size components. (author)

  9. Experience with EBR-II [Experimental Breeder Reactor] driver fuel

    Seidel, B.R.; Porter, D.L.; Walters, L.C.; Hofman, G.L.


    The exceptional performance of Experimental Breeder Reactor-II (EBR-II) metallic driver fuel has been demonstrated by the irradiation of a large number of elements under steady-state, transient overpower, and loss-of-flow conditions. High burnup with high reliability has been achieved by a close coupling of element design and materials selection. Quantification of reliability has allowed full utilization of element lifetime. Improved design and duct materials currently under test are expected to increase the burnup from 8 to 14 at.%

  10. Steam generator tubing development for commercial fast breeder reactors

    Sessions, C.E.; Uber, C.F.


    The development work to design, manufacture, and evaluate pre-stressed double-wall 2/one quarter/ Cr-1 Mo steel tubing for commercial fast breeder reactor steam generator application is discussed. The Westinghouse plan for qualifying tubing vendors to produce this tubing is described. The results achieved to date show that a long length pre-stressed double-wall tube is both feasible and commercially available. The evaluation included structural analysis and experimental measurement of the pre-stress within tubes, as well as dimensional, metallurgical, and interface wear tests of tube samples produced. This work is summarized and found to meet the steam generator design requirements. 10 refs

  11. Application of an LP model to breeder strategy studies

    Till, C.E.; Chang, Y.I.


    The paper discusses the relationships between the capital cost differential (FBR--LWR) allowable for economic breeder introduction and energy demand, resource availability (through price--quantity schedule), and economic environment for a range of future projections. The ALPS linear programming reactor systems analysis code, developed by Hanford Engineering Development Laboratory, was used for economic optimizations where they were done, and where they were not it provided a useful tool to compute the discounted total system power cost over the planning horizon for a given set of reactor mix and cost parameters

  12. Reliability modeling of Clinch River breeder reactor electrical shutdown systems

    Schatz, R.A.; Duetsch, K.L.


    The initial simulation of the probabilistic properties of the Clinch River Breeder Reactor Plant (CRBRP) electrical shutdown systems is described. A model of the reliability (and availability) of the systems is presented utilizing Success State and continuous-time, discrete state Markov modeling techniques as significant elements of an overall reliability assessment process capable of demonstrating the achievement of program goals. This model is examined for its sensitivity to safe/unsafe failure rates, sybsystem redundant configurations, test and repair intervals, monitoring by reactor operators; and the control exercised over system reliability by design modifications and the selection of system operating characteristics. (U.S.)

  13. Clinch River Breeder Reactor secondary control rod system

    McKeehan, E.R.; Sim, R.G.


    The shutdown system for the Clinch River Breeder Reactor (CRBR) includes two independent systems--a primary and a secondary system. The Secondary Control Rod System (SCRS) is a new design which is being developed by General Electric to be independent from the primary system in order to improve overall shutdown reliability by eliminating potential common-mode failures. The paper describes the status of the SCRS design and fabrication and testing activities. Design verification testing on the component level is largely complete. These component tests are covered with emphasis on design impact results. A prototype unit has been manufactured and system level tests in sodium have been initiated

  14. Integral measurement of fission products capture in fast breeder reactors

    Martin Deidier, Loick.


    For the SUPERPHENIX reactor project, it was necessary to know fission products capture with about 10% accuracy in the fast breeder reactor spectra. In this purpose, integral measurements have been carried out on the main separated products by different experimental technics (oscillation, activation and irradiation methods), but particularly on irradiated fuel pins from RAPSODIE and PHENIX reactors in order to directly obtain total effect of fission products. Same tendencies have been observed for both enriched uranium fuel and LMFBR characteristic plutonium fuel. All experimental results have been introduced in CARNAVAL cross section set [fr

  15. Instrumentation and control improvements at Experimental Breeder Reactor II

    Christensen, L.J.; Planchon, H.P.


    The purpose of this paper is to describe instrumentation and control (I ampersand C) system improvements at Experimental Breeder Reactor 11 (EBR-11). The improvements are focused on three objectives; to keep the reactor and balance of plant (BOP) I ampersand C systems at a high level of reliability, to provide diagnostic systems that can provide accurate information needed for analysis of fuel performance, and to provide systems that will be prototypic of I ampersand C systems of the next generation of liquid metal reactor (LMR) plants

  16. Status of the DEBENE fast breeder reactor development, March 1979

    Daeunert, U.; Kessler, G.


    Status report of the Fast-breeder reactor development in Germany covers the following: description of the political situation in Federal republic of germany during 1978; international cooperation in the field of fast reactor technology development; operation description of the KNK-II fast core experimental power plant; status of construction of the SNR-300; results of the research and development programs concerned with fuel element, cladding, absorber rods and core structural materials development; sodium effects; neutron irradiation effects on SS properties; reactor physics related to experiments in fast critical assemblies; fast reactor safety issues; core disruption accidents; sodium boiling experiments, measuring methods developed; component tests

  17. Status of the DEBENE fast breeder reactor development, March 1979

    Daeunert, U; Kessler, G


    Status report of the Fast-breeder reactor development in Germany covers the following: description of the political situation in Federal republic of germany during 1978; international cooperation in the field of fast reactor technology development; operation description of the KNK-II fast core experimental power plant; status of construction of the SNR-300; results of the research and development programs concerned with fuel element, cladding, absorber rods and core structural materials development; sodium effects; neutron irradiation effects on SS properties; reactor physics related to experiments in fast critical assemblies; fast reactor safety issues; core disruption accidents; sodium boiling experiments, measuring methods developed; component tests.

  18. Ceramic sphere-pac breeder design for fusion blankets

    Gierszewski, P.J.; Sullivan, J.D.


    Randomly packed beds of ceramic spheres are a practical approach to surrounding fusion plasmas with tritium-breeding material. This paper examines the general properties of sphere-pac beds for application in fusion breeder blankets. The design considerations and models are reviewed for packing, tritium breeding and recovery, thermal conductivity, purge-gas pressure drop, mechanical behavior and fabrication. The design correlations are compared against available fusion ceramic data. Specific conclusions are that ternary (three-size) beds are not attractive for fusion blankets, and that the fusion spheres should be as large as possible subject primarily to packing constraints. (orig.)

  19. Production behavior of irradiation defects in solid breeder materials

    Moriyama, Hirotake; Moritani, Kimikazu [Kyoto Univ. (Japan)


    The irradiation effects in solid breeder materials are important for the performance assessment of fusion reactor blanket systems. For a clearer understanding of such effects, we have studied the production behavior of irradiation defects in some lithium ceramics by an in-situ luminescence measurement technique under ion beam irradiation. The luminescence spectra were measured at different temperatures, and the temperature-transient behaviors of luminescence intensity were also measured. The production mechanisms of irradiation defects were discussed on the basis of the observations. (author)

  20. Fissile fuel dynamics of breeder/converter reactors

    Harms, A.A.


    The long-term fissile fuel dynamics for a hierarchy of fission reactors covering the range from pure-burners to super-breeders is examined. It is found that the breeding gains of the core and blanket can be used to identify several distinct fissile fuel histories and elucidate the importance of fuel cycle characteristics such as the time dependence of the fissile fuel doubling time. On this basis, a self-sufficient fission reactor is introduced and its determining characteristics are identified. (author)

  1. Liquid Metal Fast Breeder Reactor plant maintenance and equipment design

    Swannack, D.L.


    This paper provides a summary of maintenance equipment considerations and actual plant handling experiences from operation of a sodium-cooled reactor, the Fast Flux Test Facility (FFTF). Equipment areas relating to design, repair techniques, in-cell handling, logistics and facility services are discussed. Plant design must make provisions for handling and replacement of components within containment or allow for transport to an ex-containment area for repair. The modular cask assemblies and transporter systems developed for FFTF can service major plant components as well as smaller units. The plant and equipment designs for the Clinch River Breeder Reactor (CRBR) plant have been patterned after successful FFTF equipment

  2. Analysis of a sustainable gas cooled fast breeder reactor concept

    Kumar, Akansha; Chirayath, Sunil S.; Tsvetkov, Pavel V.


    Highlights: • A Thorium-GFBR breeder for actinide recycling ability, and thorium fuel feasibility. • A mixture of 232 Th and 233 U is used as fuel and LWR used fuel is used. • Detailed neutronics, fuel cycle, and thermal-hydraulics analysis has been presented. • Run this TGFBR for 20 years with breeding of 239 Pu and 233 U. • Neutronics analysis using MCNP and Brayton cycle for energy conversion are used. - Abstract: Analysis of a thorium fuelled gas cooled fast breeder reactor (TGFBR) concept has been done to demonstrate the self-sustainability, breeding capability, actinide recycling ability, and thorium fuel feasibility. Simultaneous use of 232 Th and used fuel from light water reactor in the core has been considered. Results obtained confirm the core neutron spectrum dominates in an intermediate energy range (peak at 100 keV) similar to that seen in a fast breeder reactor. The conceptual design achieves a breeding ratio of 1.034 and an average fuel burnup of 74.5 (GWd)/(MTHM) . TGFBR concept is to address the eventual shortage of 235 U and nuclear waste management issues. A mixture of thorium and uranium ( 232 Th + 233 U) is used as fuel and light water reactor used fuel is utilized as blanket, for the breeding of 239 Pu. Initial feed of 233 U has to be obtained from thorium based reactors; even though there are no thorium breeders to breed 233 U a theoretical evaluation has been used to derive the data for the source of 233 U. Reactor calculations have been performed with Monte Carlo radiation transport code, MCNP/MCNPX. It is determined that this reactor has to be fuelled once every 5 years assuming the design thermal power output as 445 MW. Detailed analysis of control rod worth has been performed and different reactivity coefficients have been evaluated as part of the safety analysis. The TGFBR concept demonstrates the sustainability of thorium, viability of 233 U as an alternate to 235 U and an alternate use for light water reactor used fuel as a

  3. Elements for evaluation of fast breeder reactor's potential in Argentina

    Gho, C.J.


    Fast Breeder Reactors (FBR) main features are presented in a general form, including their physical principles, the history of their evolution, their relevant technological aspects and the basis for their comparison to other energy sources. This is completed with descriptions of typical reactors and a model of FBR penetration in the Argentine electrical network. It is recommended to form a multidisciplinary board to study which position should be taken with respect to this type of reactors. In the author's opinion a Research activity should be started and gradually increased for passing to Development activities after a short while. (Author) [es

  4. Human factors engineering in Clinch River Breeder plant design

    Planchon, H.P. Jr.; Kaushal, N.N.; Snider, J.


    The Clinch River Breeder Reactor Plant (CRBRP) Project formed a Control Room Task Force to ensure that lessons learned from the Three Mile Island accident are incorporated into the design. The charter for the Control Room Task Force was to review plant operations from the control room. The focus was on the man-machine interface to ensure that the systems' designs and operator actions meshed to properly support plant operation during normal and off-normal conditions. Specific items included for review are described. This paper describes the methodology utilized to accomplish the Task Forces' objectives and the results of the review

  5. Neutron cross section measurements for the Fast Breeder Program

    Block, R.C.


    This research was concerned with the measurement of neutron cross sections of importance to the Fast Breeder Reactor. The capture and total cross sections of fission products ( 101 102 104 Ru, 143 145 Nd, 149 Sm, 95 97 Mo, Cs, Pr, Pd, 107 Pd, 99 Tc) and tag gases (Kr, 78 80 Kr) were measured up to 100 keV. Filtered neutron beams were used to measure the capture cross section of 238 U (with an Fe filter) and the total cross section of Na (with a Na filter). A radioactive neutron capture detector was developed. A list of publications is included

  6. JPRS Report, Soviet Union, Military Affairs, Personnel Report: USSR Ministry of Defense, January 1989


    This volume lists names, ranks and assignments of Soviet commanders serving in the USSR Ministry of Defense and in some related agencies, compiled from various, open Soviet sources through January of 1989...

  7. JPRS Report, Soviet Union, Military History Journal, No. 11, November 1987


    .... The articles are By the Course Indicated by Lenin, Outstanding Victory of Soviet Army, Strategic Soviet Troop Regroupings in Preparation of 1942-1943 Winter Campaign, Combat of 87th Rifle Division...

  8. Red orientalism: Mikhail Pavlovich and Marxist Oriental studies in early Soviet Russia

    Kemper, M.


    Marxist Oriental Studies in early Soviet Russia emerged in opposition to the 'bourgeois' Russian tradition of classical Oriental scholarship; rather than studying texts and history, Bolshevik Orientalists saw their task in providing the Soviet government with the necessary political and

  9. Analysis of the 1957-1958 Soviet nuclear accident

    Trabalka, J.R.; Eyman, L.D.; Auerbach, S.I.


    The presence of an extensive environmental contamination zone in Chelibinsk Province of the Soviet Union, associated with an accident in the winter of 1957 to 1958 involving the atmospheric release of fission wastes, appears to have been confirmed, primarily by an analysis of the Soviet radioecology literature. The contamination zone is estimated to contain 10(5) to 10(6) curies of strontium-90. A plausible explanation for the incident is the use of now-obsolete techniques for waste storage and cesium-137 isotope separation. Radioactive contamination appears to have resulted in resettlement of the human population from a significant area (100 to 1000 square kilometers). It therefore seems imperative to obtain a complete explanation of the cause (or causes) and consequences of the accident; Soviet experience gained in the application of corrective measures would be invaluable to the world nuclear community

  10. Comparison of Soviet and US space food and nutrition programs

    Ahmed, Selina


    The Soviet Space Food and Nutrition programs are compared with those of the U.S. The Soviets established the first Space Food programs in 1961, when one of the Soviet Cosmonauts experienced eating in zero gravity. This study indicates that some major differences exist between the two space food and nutrition programs regarding dietary habits. The major differences are in recommended nutrient intake and dietary patterns between the cosmonauts and astronauts. The intake of protein, carbohydrates and fats are significantly higher in cosmonaut diets compared to astronauts. Certain mineral elements such as phosphorus, sodium and iron are also significantly higher in the cosmonauts' diets. Cosmonauts also experience intake of certain unconventional food and plant extracts to resist stress and increase stamina.

  11. Reflections through a Soviet Window. Rural Governance and Colonization

    Jonathan Dekel-Chen


    Full Text Available This paper probes the crossroads between the realities of life and the ambitions of the early Soviet regime in one corner of its vast countryside. As a test case, I explore the meeting of organized agrarianization of Jews from the former Pale of Settlement with the mechanisms of Soviet power in the geographical and national peripheries of what was seen until recently as a monolithic, centralized state. Barring the last four years before Operation Barbarossa, a non-governmental, non-denominational American-Jewish philanthropy (the American Jewish Joint Distribution Committee [Joint or Agro-Joint] funded and administered much of this resettlement project in southern Ukraine and Crimea. As shall be seen, the arrival of an effective foreign organization not only shaped the lives of its client-colonists, but the very character of Soviet rural authority through the emergence of hybrid models of governance in the countryside.

  12. Agitation and Propagandistic Work in Soviet POW Camps

    Gulzhaukhar K. Kokebayeva


    Full Text Available The paper studies the problem of agitation work done among POWs in Soviet camps, the creation of military units and political organizations from POWs. Not only armed force was used during the Second World War, but also the power of words. The battles were accompanied by the information warfare. Opponents tried to use all possible means to manipulate people’s minds. Main directions of agitation and propaganda were defined by the «Soviet bureau of military and political propaganda», as well as the 7th Division of Soviet army. In the propaganda work among German POWs, the priority was given on shaping the ideological and political views of former soldiers and officers of the Wehrmacht. As the result of the analysis of sources the author comes to conclusion that POWs of the Second World War period became the object of testing means and methods of ideological struggle of warring nations.

  13. Proposed Chevron Tengiz venture stalls amid Soviet political squabble



    This paper reports on the status of foreign investment in Soviet oil and gas joint ventures which has reached a critical juncture. Just as the U.S. is considering granting most favored nation trade status to the U.S.S.R., the joint venture petroleum deal seen as the litmus test for such deals-Chevron Corp.'s proposed addition of supergiant Tengiz oil field to its Caspian Sea joint venture-has stalled amid controversy. Unconfirmed reports from Soviet officials and other foreign joint venture participants in the U.S.S.R. have Chevron pulling out of the long negotiated, multibillion dollar project after the Soviets rejected the company's terms. Chevron, however, insists the project is still alive

  14. Soviets may halt production drop with outside funds, technologies

    Riva, J.P. Jr.


    In a long history of Soviet oil production, a normal development progression has occurred in which several prolific oil provinces have been discovered in sequence, become dominant producers, and then declined. The present drop in Soviet oil output is partly the result of the natural decline of many of its large older fields, but also it is due to reduced capital investments in the domestic oil industry and to the reliance on outdated and inefficient exploration and development technology. This paper reports that financial and technical problems can be remedied by joint ventures with foreign oil companies. Despite these limitations, the Soviet Union has led the world in oil production ever since 1974, often by a considerable margin

  15. Matvei Petrovich Bronstein and Soviet theoretical physics in the thirties

    Gorelik, Gennady E


    Gennady E. Gorelik and Victor Ya. Frenkel Matvei Petrovich Bronstein and Soviet Theoretical Physics in the Thirties Translated by Valentina M. Levina The short life and tragic death of Matvei Petrovich Bronstein (1906-1938) may be seen as a symbol of the man's time and his country. One of the most remarkable features of Soviet history was the impressive advance of its physical sciences against the brutal and violent background of totalitarianism. Soviet advances in nuclear and space technology form an important part of world history. These achievements had their roots in the 1930s, when Bronstein's generation entered science. Among his friends were the famous physicists Lev Landau and George Gamow. Bronstein worked in the vast field of theoretical physics, ranging from nuclear physics to astrophysics and from relativistic quantum theory to cosmology. His pioneering work on quantizing gravitation goes beyond the history of physics, because today the quantum theory of gravitation occupies a special place in fun...

  16. Criminal-legal prohibitions in the soviet juridical discourse

    Andrey V. Skorobogatov


    Full Text Available Objective to determine the place of criminal law prohibitions in the formation development and functioning of the Soviet legal discourse. Methods dialectic approach to the research of social phenomena which allows to analyze them in historical development and functioning in the context of the unity of the objective and subjective factors as well as postmodern paradigm giving the opportunity to explore the legal reality at different levels including the lawinterpretation one. Dialectical approach and postmodern paradigm have determined the choice of specific research methods comparative hermeneutics discursive formally legal. Results basing on the analysis of normativelegal acts regulating criminal legal relations in the USSR the development of the Soviet criminal law was considered since its emergence to termination of existence. Conclusion on its restrictive nature was made which was in line with the main task of this sector of law ndash the protection of the Soviet system and socialist property from criminal encroachments. The normative regulatory basis of criminal law prohibitions determined the general nature of the Soviet legal discourse which was designed to prove the necessity and expediency of such means of protecting public and state interests in the period of building communism. Scientific novelty on the basis of use of the complex classical and postclassical methods the article for the first time studies the role of criminal law prohibitions in the development of Soviet legal discourse. Practical value the key issues and conclusions of the article can be used in scientific and pedagogical activity while researching the issues of the nature and trends of development of the Soviet criminal law.

  17. Evaluation of the trial design studies for an advanced marine reactor, (1)


    The trial design of three type reactors, semi-integrated, integrated and integrated (self-pressurized) type, was carried out in order to clarify the reactor type for the advanced marine reactor that would be developed for its realization in future and in order to extract its research and development theme. The trial design was carried and finished as for the three type reactors in same specifications in order to improve the following characteristics, small in size, light in weight, high in safety and reliability, and economic. In this report, a comparison and review of the following items are described as for the above three type reactors, (1) specifications, (2) shielding, (3) refueling, (4) in-service inspection, (5) analysis of the transients and accidents, (6) piping systems, (7) control systems, (8) dynamic analysis, (9) overall comparison, (10) research and development theme and theme for study in future. (author)

  18. Burn-up dependent steady-state thermal hydraulic analysis of Pakistan research reactor-1

    Muhammad Atta


    Full Text Available The burn-up dependent steady-state thermal hydraulic analysis of Pakistan research reactor-1, reference operating core, has been carried out utilizing standard computer codes WIMS/D4, CITATION, and RELAP5/MOD3.4. Reactor codes WIMS/D4 and CITATION have been used for the calculations of neutronic parameters including peaking factors and power profiles at different burn-up considering a xenon free core and also the equilibrium xenon values. RELAP5/MOD3.4 code was utilized for the determination of peak fuel centerline, clad and coolant temperatures to ensure the safety of the reactor throughout the cycle. The calculations reveal that the reactor is safe and no nucleate boiling will commence at any part of the core throughout the cycle and that the safety margin increases with burnup as peaking factors decrease.

  19. U.S. and Soviet Agriculture: The Shifting Balance of Power. Worldwatch Paper 51.

    Brown, Lester R.

    Analysts of U.S.-Soviet balance of power usually focus on relative military strength. But other factors determine a country's overall power and influence. Among the most basic is a country's capacity to feed its people. By this measure the Soviet Union appears to be in deep trouble. Massive spending has increased Soviet military strength in recent…

  20. JPRS Report, Soviet Union, World Economy & International Relations, No. 5, May 1988


    percent (2). The socialist states (the PRC, DPRK, Mongolia, Viet - nam , Cambodia and Laos) are the Soviet Union’s prin- cipal foreign trade partners: our...right is no longer attempting to maintain that the Soviet leader- ship’s new course amounts to cosmetic or purely propa- ganda measures. Soviet

  1. Historical experience of the Soviet period Russian school in the context of information society development

    Kozlova Galina N.


    Full Text Available The process and basic tendencies of creating scientific information related to the development of the Russian comprehensive school during the Soviet period are considered in the paper. The conclusions and generalizations are based on the analysis of articles and dissertation papers published in Russia in Soviet and post-Soviet time

  2. Fragmenting pastoral mobility: Changing grazing patterns in Post-Soviet Kazakhstan

    Carol Kerven; Ilya Ilych Alimaev; Roy Behnke; Grant Davidson; Nurlan Malmakov; Aidos Smailov; Iain Wright


    Kazak nomads were seasonally mobile in the pre-Soviet period, in response to climate variability and landscape heterogeneity. The scale of these movements was interrupted during the Soviet period, but some degree of mobility remained. Mobility virtually ceased in the post-Soviet 1990s, but is reemerging as flock numbers rebound from the mid 1990s population crash.

  3. Modeling of tritium behavior in ceramic breeder materials

    Kopasz, J.P.; Tam, S.W.; Johnson, C.E.


    Computer models are being developed to predict tritium release from candidate ceramic breeder materials for fusion reactors. Early models regarded the complex process of tritium release as being rate limited by a single slow step, usually taken to be tritium diffusion. These models were unable to explain much of the experimental data. We have developed a more comprehensive model which considers diffusion and desorption from the grain surface. In developing this model we found that it was necessary to include the details of the surface phenomena in order to explain the results from recent tritium release experiments. A diffusion-desorption model with a desorption activation energy which is dependent on the surface coverage was developed. This model provided excellent agreement with the results from the CRITIC tritium release experiment. Since evidence suggests that other ceramic breeder materials have desorption activation energies which are dependent on surface coverage, it is important that these variations in activation energy be included in a model for tritium release. 17 refs., 12 figs

  4. Materials requirements for liquid metal fast breeder reactors

    Bennett, J.W.; Horton, K.E.


    Materials requirements for Liquid Metal Fast Breeder Reactors (LMFBRs) are quite varied with requisite applications ranging from ex-reactor components such as piping, pumps, steam generators and heat exchangers to in-reactor components such as heavy section reactor vessels, core structurals, fuel pin cladding and subassembly flow ducts. Requirements for ex-reactor component materials include: good high temperature tensile, creep and fatigue properties; compatibility with high temperature flowing sodium; resistance to wear, stress corrosion cracking, and crack propagation; and good weldability. Requirements for in-reactor components include most of those cited above for ex-reactor components as supplemented by the following: resistance to radiation embrittlement, swelling and radiation enhanced creep; good neutronics; compatibility with fuel and fission product materials; and resistance to mass transfer via flowing sodium. Extensive programs are currently in place in a number of national laboratories and industrial contractors to address the materials requirements for LMFBRs. These programs are focused on meeting the near term requirements of early LMFBRs such as the Fast Flux Test Facility and the Clinch River Breeder Reactor as well as the longer term requirements of larger near-commercial and fully-commercial reactors

  5. Design and development of ceramic breeder demo blanket

    Enoeda, M.; Sato, S.; Hatano, T.


    Ceramic breeder blanket development has been widely conducted in Japan from fundamental researches to project-oriented engineering scaled development. A long term R and D program has been launched in JAERI since 1996 as a course of DEMO blanket development. The objectives of this program are to provide engineering data base and fabrication technologies of the DEMO blanket, aiming at module testing in ITER currently scheduled to start from the beginning of the ITER operation as a near-term target. Two types of DEMO blanket systems, water cooled blanket and helium cooled blanket, have been designed to be consistent with the SSTR (Steady State Tokamak Reactor) which is the reference DEMO reactor design in JAERI. Both of them utilize packed small pebbles of breeder Li 2 O or Li 2 TiO 3 as a candidate) and neutron multiplier (Be) and rely on the development of advanced structural materials (a reduced activation ferritic steel F82H) compatible with high temperature operation. (author)

  6. Investigation of base isolation for fast breeder reactor building

    Morishita, M.; Kobatake, M.; Ohta, K.; Okada, Y.


    Achievement of great rationalization for seismic-resistant design of equipment system is necessary and indispensable from the viewpoints of economical and structural validity for a fast breeder reactor to be made practical. The method of reducing seismic loads on the building and equipment by application of base isolation may be an effective method, but in application to nuclear facilities, it will become necessary to examine the feasibility to actual design considering the severe seismic design requirements in Japan. With these considerations as the background, the authors carried out analytical studies from various viewpoints such as restoring force characteristics of base isolation device, influence of input earthquake motion, soil-structure interaction in base- isolated structure, etc. in case of providing base isolation system for a fast breeder reactor building. Based on these analytical studies, vibration tests on a base-isolated structure using a triaxial shaking table and simulation analyses of the tests were performed attempting to verify the effectiveness of the base isolation system and appropriateness of the analysis method. Results are presented

  7. Fabrication of metallic fuel for fast breeder reactor

    Saify, M.T.; Jha, S.K.; Abdulla, K.K.; Kumar, Arbind; Mittal, R.K.; Prasad, R.S.; Mahule, N.; Kumar, Arun; Prasad, G.J.


    Natural uranium oxide fuelled PHWRs comprises of first stage of Indian nuclear power programme. Liquid metal fast breeder reactors fuelled by Pu (from PHWR's) form the second stage. A shorter reactor doubling time is essential in order to accelerate the nuclear power growth in India. Metallic fuels are known to provide shorter doubling times, necessitating to be used as driver fuel for fast breeder reactors. One of the fabrication routes for metallic fuels having random grain orientation, is injection casting technique. The technique finds its basis in an elementary physical concept - the possibility of supporting a liquid column within a tube, by the application of a pressure difference across the liquid interface inside and outside the tube. At AFD, BARC a facility has been set-up for injection casting of uranium rods in quartz tube moulds, demoulding of cast rods, end-shearing of rods and an automated inspection system for inspection of fuel rods with respect to mass, length, diameter and diameter variation along the length and internal and external porosities/voids. All the above facilities have been set-up in glove boxes and have successfully been used for fabrication of uranium bearing fuel rods. The facility has been designed for fabrication and inspection of Pu-bearing metallic fuels also, if required

  8. Alternative fuels for the French fast breeder reactors programme

    Bailly, H.; Bernard, H.; Mansard, B.


    French fast breeder reactors use mixed oxide as reference fuel. A great deal of experience has been gained in the behaviour and manufacture of oxide fuel, which has proved to be the most suitable fuel for future commercial breeder reactors. However, France is maintaining long-term alternative fuels programme, in order to be in a position to satisfy eventually new future reactor design and operational requirements. Initially, the CEA in France developed a carbide-based, sodium-bonded fuel designed for a high specific power. The new objective of the alternative fuels programme is to define a fuel which could replace the oxide without requiring any significant changes to the operating conditions, fuel cycle processes or facilities. The current program concentrates on a nitride-based, helium-bonded fuel, bearing in mind the carbide solution. The paper describes the main characteristics required, the manufacturing process as developed, the inspection methods, and the results obtained. Present indications are that the industrial manufacture of mixed nitride is feasible and that production costs for nitride and oxide fuels would be not significantly different. (author) 8 refs., 2 figs

  9. Group size adjustment to ecological demand in a cooperative breeder.

    Zöttl, Markus; Frommen, Joachim G; Taborsky, Michael


    Environmental factors can determine which group size will maximize the fitness of group members. This is particularly important in cooperative breeders, where group members often serve different purposes. Experimental studies are yet lacking to check whether ecologically mediated need for help will change the propensity of dominant group members to accept immigrants. Here, we manipulated the perceived risk of predation for dominant breeders of the cooperatively breeding cichlid fish Neolamprologus pulcher to test their response to unrelated and previously unknown immigrants. Potential immigrants were more readily accepted if groups were exposed to fish predators or egg predators than to herbivorous fish or control situations lacking predation risk. Our data are consistent with both risk dilution and helping effects. Egg predators were presented before spawning, which might suggest that the fish adjust acceptance rates also to a potential future threat. Dominant group members of N. pulcher apparently consider both present and future need of help based on ecological demand. This suggests that acceptance of immigrants and, more generally, tolerance of group members on demand could be a widespread response to ecological conditions in cooperatively breeding animals.

  10. Analysis of fuel sodium interaction in a fast breeder reactor

    Tezuka, M.; Suzuki, K.; Sasanuma, K.; Nagasima, K.; Kawaguchi, O.

    A code ''SUGAR'' has been developed to evaluate molten Fuel Sodium Interaction (FSI) in a fast breeder reactor. This code computes thermohydrodynamic behavior by heat transfer from fuel to sodium and dynamic deformation of reactor structures simultaneously. It was applied to evaluate FSI in local fuel melting accident in a fuel assembly and in core disassembly accident for the 300MWe fast breeder reactor under development in Japan. The analytical methods of the SUGAR code are mainly shown in the following: 1) the thermal and dynamic model of FSI is mainly based on Cho-Wright's model; 2) the axial and radial expansions of surroundings of FSI region are calculated with one-dimensional and compressive hydrodynamics equation; 3) the structure response is calculated with one-dimensional and dynamic stress equation. Our studies show that mass of fuel interacted with sodium, ratio of fuel mass to sodium mass, fuel particle size, heat transfer coefficient from fuel to sodium, and structure's force have great effect on pressure amplitude and deformation of reactor structures

  11. Instrumentation and control of the fast breeder reactors

    Juengst, U.


    Generally the Liquid Metal Fast Breeder Reactor (LMFBR) in comparison to the Leight Water Reactors hasn't exceptionally different requirements to the instrumentation and control systems. There fore the paper restricts itself to outline the peculiarities of LMFBR's exemplified at the design of the German Breeder SNR-300 beeing under construction. The special sodium instrumentation for temperature level, flow and pressure in the main systems is described. The automatic control system enabled the plant to follow the bad demand of the grid immidiately. The nuclear power production itself is stabilized by inherent coefficients of the core. An exceptional high reliability of the shut down systems is necessary; there fore all LMFBR's have two completely independant and diverse shut down systems. In the SNR-300 also the control of decay heat removal and the active safety systems for enclosure of radioactivity are distributed to two independent and diverse plant protection systems (PPS) so that the first system covered the accidents due to internal events and the second systems managed the external events such as earthquake and aircraft crash. (orig.)

  12. Interim Report on Fluid-Fuel Thermal Breeder Reactors (Revised)

    MacPherson, H. G.; Alexander, L. G.; Carter, W. L.; Chapman, R. H.; Kinyon, B. W.; Miller, J. W.


    The merits of aqueous-homogeneous ), graphite-moderated molten salt (MSBR) , and graphite-moderated liquid-bismuth (LBBR) breeder reactors operated at nearly comparable fuel-cycle costs (~1.5 mills/kwhr) were evaluated. The net electrical plant capability was assumed to be 1000 MwE, and the fuel and fertile streams were processed continuously on-site. The specific powers based on fuel were 1.2, 1.2, and 0.5 MwE/kg respectively, and 5.9, 3.7, and 5.3 MwE/tonne based on thorium. Net breeding ratios were 1.10, 1.07, and 1.07, giving doubling times of 5-1/2, 11, and 25 full power years . The fuel-cycle costs at the design points selected were 1.4, 1.3, and 1.6 mills/kwhr . The AHBR has an advantage in breeding ratio and doubling time because D 2 O is superior to graphite as a moderator in breeder reactors. MSBR has an advantage in fuel-cycle costs and in inventory of uranium in the fertile stream as a result of using a solution blanket.

  13. Role of the breeder in long term energy economics

    Kosobud, R.F.; Chang, Y.I.; Daly, T.A.


    In this study the authors report the results of their study of private and public decisions affecting the use of nuclear and other energy technologies over a long run time horizon. For this purpose, the authors employ the well known ETA-MACRO model which provides for economic and energy sector interactions. In this first of their planned series of studies, they consider the impact on the use of competing energy technologies of a public decision to apply benefit-cost analysis to the production of carbon dioxide (CO 2 ) that enters the atmosphere. Assuming the public choice is to impose an appropriate penalty tax on those technologies which generate CO 2 and to allow decentralized private decisions to choose the optimal mix of energy technologies that maximize a nonlinear objective function subject to constraints, the authors find that the breeder technology is chosen to provide a much larger share of domestically consumed energy. Having the breeder technology available as a substitute permits control of CO 2 without significant reductions in consumption or gross national product growth paths

  14. The uranium-plutonium breeder reactor fuel cycle

    Salmon, A.; Allardice, R.H.


    All power-producing systems have an associated fuel cycle covering the history of the fuel from its source to its eventual sink. Most, if not all, of the processes of extraction, preparation, generation, reprocessing, waste treatment and transportation are involved. With thermal nuclear reactors more than one fuel cycle is possible, however it is probable that the uranium-plutonium fuel cycle will become predominant; in this cycle the fuel is mined, usually enriched, fabricated, used and then reprocessed. The useful components of the fuel, the uranium and the plutonium, are then available for further use, the waste products are treated and disposed of safely. This particular thermal reactor fuel cycle is essential if the fast breeder reactor (FBR) using plutonium as its major fuel is to be used in a power-producing system, because it provides the necessary initial plutonium to get the system started. In this paper the authors only consider the FBR using plutonium as its major fuel, at present it is the type envisaged in all, current national plans for FBR power systems. The corresponding fuel cycle, the uranium-plutonium breeder reactor fuel cycle, is basically the same as the thermal reactor fuel cycle - the fuel is used and then reprocessed to separate the useful components from the waste products, the useful uranium and plutonium are used again and the waste disposed of safely. However the details of the cycle are significantly different from those of the thermal reactor cycle. (Auth.)

  15. Mechanical design of a light water breeder reactor

    Fauth, W.L. Jr.; Jones, D.S.; Kolsun, G.J.; Erbes, J.G.; Brennan, J.J.; Weissburg, J.A.; Sharbaugh, J.E.


    In a light water reactor system using the thorium-232--uranium-233 fuel system in a seed-blanket modular core configuration having the modules arranged in a symmetrical array surrounded by a reflector blanket region, the seed regions are disposed for a longitudinal movement between the fixed or stationary blanket region which surrounds each seed region. Control of the reactor is obtained by moving the inner seed region thus changing the geometry of the reactor, and thereby changing the leakage of neutrons from the relatively small seed region into the blanket region. The mechanical design of the Light Water Breeder Reactor (LWBR) core includes means for axially positioning of movable fuel assemblies to achieve the neutron economy required of a breeder reactor, a structure necessary to adequately support the fuel modules without imposing penalties on the breeding capability, a structure necessary to support fuel rods in a closely packed array and a structure necessary to direct and control the flow of coolant to regions in the core in accordance with the heat transfer requirements. 4 claims, 24 drawing figures

  16. Effective thermal conductivity of advanced ceramic breeder pebble beds

    Pupeschi, S., E-mail:; Knitter, R.; Kamlah, M.


    As the knowledge of the effective thermal conductivity of ceramic breeder pebble beds under fusion relevant conditions is essential for the development of solid breeder blanket concepts, the EU advanced and reference lithium orthosilicate material were investigated with a newly developed experimental setup based on the transient hot wire method. The effective thermal conductivity was investigated in the temperature range RT–700 °C. Experiments were performed in helium and air atmospheres in the pressure range 0.12–0.4 MPa (abs.) under a compressive load up to 6 MPa. Results show a negligible influence of the chemical composition of the solid material on the bed’s effective thermal conductivity. A severe reduction of the effective thermal conductivity was observed in air. In both atmospheres an increase of the effective thermal conductivity with the temperature was detected, while the influence of the compressive load was found to be small. A clear dependence of the effective thermal conductivity on the pressure of the filling gas was observed in helium in contrast to air, where the pressure dependence was drastically reduced.

  17. Russian, Soviet, and post-Soviet scientific migration: history and patterns

    Kojevnikov, Alexei


    Immigrant scientists from other European countries (predominantly German) were crucial in establishing the tradition of modern science in the Russian Empire of the 18th and 19th centuries. Since the 1860s, however, outgoing waves of scientific migration started originating in Russia, bringing important innovations to international science. The scale and patterns of migration varied greatly with the turbulent time. The talk will describe several landmark stages of the proceess and their cultural consequences: from opening higher education possibilities for women during the late 19th century, to post-1917 academic refugees and Soviet defectors, to the 1960s brain drain provoked by the launch of Sputnik, and to what can be called the first truly global scientific diaspora of Russophone scientists after 1990.

  18. The Soviet Union prepares to roll up its sleeves

    Koryakin, Y.


    The first conference of the Soviet Nuclear Society (NESU-90) was held, from 26 to 29 June in Obninsk at the Moscow Region Scientific Centre, where the first nuclear power plant was commissioned. Around 600 specialists including several dozen distinguished foreigners were assembled there. The title of the conference - Nuclear energy in the USSR: problems and prospects (ecology, economics and law) - underlined its intention: to promote a dialogue with society on the broad question of satisfying the demand for energy. The 55 papers read and discussed at the conference, were largely concerned with the problems confronting nuclear power, and attention was directed to the surrounding social environment in the Soviet Union. (author)

  19. Agitation and Propagandistic Work in Soviet POW Camps

    Gulzhaukhar K. Kokebayeva


    The paper studies the problem of agitation work done among POWs in Soviet camps, the creation of military units and political organizations from POWs. Not only armed force was used during the Second World War, but also the power of words. The battles were accompanied by the information warfare. Opponents tried to use all possible means to manipulate people’s minds. Main directions of agitation and propaganda were defined by the «Soviet bureau of military and political propaganda», as well as ...

  20. Soviet medical response to the Chernobyl nuclear accident

    Linnemann, R.E.


    The nuclear accident at Chernobyl was the worst in the history of nuclear power. It tested the organized medical response to mass radiation casualties. This article reviews the Soviet response as reported at the 1986 postaccident review meeting in Vienna and as determined from interviews. The Soviets used three levels of care: rescue and first aid at the plant site; emergency treatment at regional hospitals; and definitive evaluation and treatment in Moscow. Diagnosis, triage, patient disposition, attendant exposure, and preventive actions are detailed. The United States would be well advised to organize its resources definitively to cope with future nonmilitary nuclear accidents

  1. On the safety of nuclear installations in the Soviet Union



    The cooperation agreements between authorities and industries of the Soviet Union and West Germany now are gaining shape in practice. In this context, the framework conditions are of great interest that govern the realisation of the extensive nuclear energy programme of the Soviet Union. The chairman of the State Commission established in 1984 for supervision of nuclear installations and guidance on safety-engineering enhancement of nuclear power plant in the USSR has been interviewed by atw on topics of organisations, measures and regulatory activities in the field of reactor safety and radiation protection. The interview is given in full. (orig.) [de

  2. Annual non-compliance report drops charge on Soviet radars

    Lockwood, D.


    Last year's non-compliance report said a data link between Soviet early warming radars and the Moscow ABM system may be a significant violation of fundamental provisions of the ABM Treaty. This year's report, however, reverses last years position by saying: In light of the ambiguity of the Treaty language, and based on further review of the issue and on the probable Soviet practice - the US now judges that the support of ABM systems by early warning radars providing precise handover data will not constitute use of the radars as ABM radars in violation of the ABM Treaty

  3. The fast breeder reactor: what is security and freedom worth to us


    Risks for governmental and non-governmental proliferation of nuclear weapons as a consequence of the development of fast breeder reactor technology are discussed. Polemological as well as sociological and political analyses together with ecological consequences lead to the conclusion that the fast breeder is not necessary for energy production and socially unacceptable

  4. Economical efficiency estimation of the power system with an accelerator breeder

    Rublev, O.V.; Komin, A.V.


    The review deals with economical indices of nuclear power system with an accelerator breeder producing secondary nuclear fuel. Electric power cost was estimated by the method of discounted cost. Power system with accelerator breeder compares unfavourably with traditional nuclear power systems with respect to its capitalized cost

  5. Egg fertility and hatchability in Avians broiler-breeder hens under ...

    Impact of temperature and humidity in different month of lay was evaluated on fertility and hatchability in broiler breeder hens reared in Sapele, Nigeria. Six million, six hundred and nineteen thousand, seven hundred and forty six eggs from flocks of Avians broiler-breeder hens reared between 2005 and 2006 in a farm ...

  6. Respiratory diseases and allergic sensitization in swine breeders: a population-based cross-sectional study.

    Galli, Luigina; Facchetti, Susanna; Raffetti, Elena; Donato, Francesco; D'Anna, Mauro


    The daily occupation as a swine breeder involves exposure to several bacterial components and organic dusts and inhalation of a large amount of allergens. To investigate the risk of respiratory diseases and atopy in swine breeders compared with the general population living in the same area. A population-based cross-sectional study was conducted in an agricultural area of northern Italy that enrolled a random sample of resident male breeders and non-breeders. Demographic features, comorbidities, and presence of allergic respiratory disease were retrieved through interview. Prick tests for common allergens were performed. An evaluation of pollen and mold in air samples taken inside and outside some swine confinement buildings also was performed. One hundred one male breeders (78 native-born, mean age ± SD 43.0 ± 11.1 years) and 82 non-breeders (43.0 ± 11.1 years) were enrolled. When restricting the analysis to native-born subjects, breeders vs non-breeders showed a lower prevalence of respiratory allergy (12.8% vs 31.1%, respectively, P = .002), asthma (6.4% vs 15.8%, P = .059), rhinitis (16.7% vs 51.2%, P increase, and might decrease, the risk of pollen sensitization and allergic disease. Copyright © 2015 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  7. Body composition and reproduction in broiler breeders: impact of feeding strategies

    Emous, van R.A.



    Key words: broiler breeder, feeding strategies, body composition, reproduction, behavior

    Nowadays, welfare issues in broiler breeders associated with nutrition and reproductive characteristics, are becoming increasingly challenging. Due to genetic selection

  8. Molecular characterization of chicken infectious anemia viruses detected from breeder and broiler chickens in South Korea.

    Kim, H-R; Kwon, Y-K; Bae, Y-C; Oem, J-K; Lee, O-S


    In South Korea, 32 sequences of chicken infectious anemia virus (CIAV) from various flocks of breeder and commercial chickens were genetically characterized for the first time. Phylogenetic analysis of the viral protein 1 gene, including a hypervariable region of the CIAV genome, indicated that Korean CIAV strains were separated into groups II, IIIa, and IIIb. Strains were commonly identified in great-grandparent and grandparent breeder farms as well as commercial chicken farms. In the field, CIAV strains from breeder farms had no clinical effects, but commercial farm strains were associated with depression, growth retardation, and anemia regardless of the group from which the strain originated. In addition, we identified 7 CIAV genomes that were similar to vaccine strains from vaccinated and unvaccinated breeder flocks. These data suggest that further studies on pathogenicity and vaccine efficacy against the different CIAV group are needed, along with continuous CIAV surveillance and genetic analysis at breeder farms.


    Ivan Andreevich Esaulov


    The article looks at a number of marginal concepts of Freudian theory and at his articles on Dostoevsky that revealed the 'cultural unconscious' of the founder of psychoanalysis. We point at the similarities between Freud's cultural unconscious – with its negativity against of the “Christian God”, historical Russia and Russian people – and the Soviet type of culture, especially in its early period (1920s – early 1930s). The ardor of Freudo-Marxism typical for the highest levels of Soviet powe...

  10. Economic Development in Afghanistan during the Soviet Period, 1979-1989: Lessons Learned from the Soviet Experience in Afghanistan


    gouvernement afghan. Les auteurs de l’étude concluent que l’accent sur la sécurité en Afghanistan a été préjudiciable à un développement économique...Afghanistan (PDPA) regime were largely influenced by Soviet economic theory and experience. In addition to adopting economic planning based on the five...rural Afghans. On peasant in Leninist theory see Esther Kingston-Mann, “Proletarian Theory and Peasant Practice: Lenin 1901-1904,” in Soviet Studies

  11. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore.

    Ausband, David E; Mitchell, Michael S; Waits, Lisette P


    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment. Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758). We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA. Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males' litters. Harvest had no effect on the frequency of breeder turnover. We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

  12. Controlling the Image of the Teacher's Body under Authoritarianism: The Case of Soviet Latvia (1953-1984)

    Kestere, Iveta; Kalke, Baiba


    The ideal of the Soviet teacher can be revealed in Soviet mass media, but historians are challenged by the question "what was the actual reality"? Therefore, we addressed the reality of the Soviet school using two research questions: (1) What teacher image was cultivated by Soviet propaganda, and what did the average teacher actually…

  13. Health status of Russian minorities in former Soviet Republics

    Groenewold, W.G.F.; van Ginneken, J.K.S.


    Objectives: To examine if, and to what extent, disparities in health status exist between ethnic Russians and the native majority populations of four former Soviet Republics; and to determine to what extent indicators of socio-economic status and lifestyle behaviours explain variations in health

  14. Aging in the Soviet Union: A West Siberian Perspective.

    Demitri, Shimkin


    Presents ethnographic observations on the aged and aging from six months' residence in Siberian industrial city. Describes interactions with medical personnel and reviews scanty literature in Soviet Union. Notes integration of aged in families and respect given to older persons. Discusses problems of elderly caused by hard living conditions,…

  15. Gas in the former Soviet Union. A special report



    This special report includes 13 papers on various aspects of the natural gas industry and its development in the republics of the former Soviet Union and a full listing of all the Russian oil and gas fields. Separate abstracts have been prepared for 9 papers. (UK)

  16. "No Truer Truth" : Sincerity Rhetoric in Soviet Russia

    Rutten, E.; Dhooge, B.; De Dobbeleer, M.


    In contemporary discourse about human emotions, concerns about the sincerity of individuals, groups, and institutions thrive. This article thickens recent scholarship on sincerity rhetoric with an analysis of emotional regimes in Soviet Russia – a time and place where the notion of sincerity

  17. The Soviet collapse: Contradictions and neo-modernisation

    Richard Sakwa


    Full Text Available Over two decades have passed since the dissolution of the communist system and the disintegration of the Soviet Union in 1991 yet there is still no consensus over the causes and consequences of these epochal (and distinct events. As for the causes, it is easy to assume that the fall was ‘over-determined’, with an endless array of factors. It behoves the scholar to try to establish a hierarchy of causality, which is itself a methodological exercise in heuristics. However, the arbitrary prioritisation of one factor over another is equally a hermeneutic trap that needs to be avoided. Following an examination of the various ‘why’ factors, we focus on ‘what’ exactly happened at the end of the Soviet period. We examine the issue through the prism of reformulated theories of modernisation. The Soviet system was a sui generis approach to modernisation, but the great paradox was that the system did not apply this ideology to itself. By attempting to stand outside the processes which it unleashed, both society and system entered a cycle of stagnation. The idea of neo-modernisation, above all the idea that societies are challenged to come to terms with the ‘civilisation of modernity’, each in their own way, provides a key to developments. In the end the Soviet approach to this challenge failed, and the reasons for this need to be examined, but the challenge overall remains for post-communist Russia.

  18. A Genealogy of (post-Soviet Dependency: Disabling Productivity

    Cassandra Hartblay


    Full Text Available Nancy Fraser and Linda Gordon's 1994 article “A Genealogy of Dependency: Tracing a Keyword of the US Welfare State” explored the historical emergence of "dependency" as a moral category of post-industrial American state. In this article, I engage their framework to explore the genealogy of dependency in America's post-industrial sister, the post-Soviet Russian Federation. I also add disability as a core element of 'dependency' that was largely absent from Fraser and Gordon's original analysis. Considering cross-cultural translation, I ask how Russian deployments of three words that all relate to a concept of interdependence align with and depart from American notions of dependency, and trace historical configurations of the Soviet welfare state vis-a-vis disability. To do so, I draw on historical and cultural texts, linguistic comparisons, secondary sources, and ethnographic research. Given this analysis, I argue that rather than a Cold War interpretation of the Soviet Union and the US as oppositional superpowers in the 20th century, a liberatory disability studies framework suggests that in the postindustrial era the Soviet Union and the United States emerged as dual regimes of productivity. I suggest that reframing postsocialism as a global condition helps us to shift considerations of disability justice from a critique of capitalism to a critique of productivity.    Keywords: dependency, disability, citizenship, russia, productivity

  19. Evolution of environmental protection strategies in the Soviet Union

    Lesperance, A.M.


    In performing this work, interviews were conducted with members of the Supreme Soviet Committee for Rational Use of Natural Resources, Moscow, City Council, and St. Petersburg City Council. These officials provided their views on the current status of environmental protection in the former Soviet Union. Literature published in English, although limited, supplemented these discussions. In addition, a literature search was conducted of recent articles about this topic. Although the research for this paper was conducted before and during the August 1991 coup attempt in the Soviet Union, and after the formation of the Commonwealth of Independent States (CIS), many of the observations expressed in this report may be relevant to the new states. This report provides to historical perspective on the barriers encountered while attempting to develop environmental policy in the former Soviet Union and establishes a context for problems facing the new states in developing their environmental policies. Organization changes that have occurred in environmental protection since the August coup are included to the extent they are known

  20. History: An Analysis of the Former Soviet Union Foreign Policy ...

    This paper attempts an appraisal of the FSU's foreign policy using Russia and Ukraine as case studies. The international context which Russia and Ukraine have confronted in view of the gravity of change, combined with the unique circumstances of their emergence through a process of the soviet state collapse, has ...