WorldWideScience

Sample records for source audio magnetotellurics

  1. APPLICATION OF CONTROLLED SOURCE AUDIO MAGNETOTELLURIC (CSAMT AT GEOTHERMAL

    Directory of Open Access Journals (Sweden)

    Susilawati S.

    2017-04-01

    Full Text Available CSAMT or Controlled Source Audio-Magnetotelluric is one of the Geophysics methods to determine the resistivity of rock under earth surface. CSAMT method utilizes artificial stream and injected into the ground, the frequency of artificial sources ranging from 0.1 Hz to 10 kHz, CSAMT data source effect correction is inverted. From the inversion results showed that there is a layer having resistivity values ranged between 2.5 Ω.m – 15 Ω.m, which is interpreted that the layer is clay.

  2. The application of controlled source audio frequency magnetotelluric method to prospecting for uranium and gold

    International Nuclear Information System (INIS)

    Guan Taiping

    1992-01-01

    The controlled source audio frequency magnetotelluric method is a new geophysical method which is rapid, effective and economical and can be used for studying the structural pattern of underground strata (rock bodies). This method provides the basis for the determination of the deeper part and structures within the unconformity-related uranium deposit in North China Platform and the result of application is optimal

  3. Mount St. Helens: Controlled-source audio-frequency magnetotelluric (CSAMT) data and inversions

    Science.gov (United States)

    Wynn, Jeff; Pierce, Herbert A.

    2015-01-01

    This report describes a series of geoelectrical soundings carried out on and near Mount St. Helens volcano, Washington, in 2010–2011. These soundings used a controlled-source audio-frequency magnetotelluric (CSAMT) approach (Zonge and Hughes, 1991; Simpson and Bahr, 2005). We chose CSAMT for logistical reasons: It can be deployed by helicopter, has an effective depth of penetration of as much as 1 kilometer, and requires less wire than a Schlumberger sounding.

  4. Regularized inversion of controlled source audio-frequency magnetotelluric data in horizontally layered transversely isotropic media

    International Nuclear Information System (INIS)

    Zhou, Jianmei; Shang, Qinglong; Wang, Hongnian; Wang, Jianxun; Yin, Changchun

    2014-01-01

    We present an algorithm for inverting controlled source audio-frequency magnetotelluric (CSAMT) data in horizontally layered transversely isotropic (TI) media. The popular inversion method parameterizes the media into a large number of layers which have fixed thickness and only reconstruct the conductivities (e.g. Occam's inversion), which does not enable the recovery of the sharp interfaces between layers. In this paper, we simultaneously reconstruct all the model parameters, including both the horizontal and vertical conductivities and layer depths. Applying the perturbation principle and the dyadic Green's function in TI media, we derive the analytic expression of Fréchet derivatives of CSAMT responses with respect to all the model parameters in the form of Sommerfeld integrals. A regularized iterative inversion method is established to simultaneously reconstruct all the model parameters. Numerical results show that the inverse algorithm, including the depths of the layer interfaces, can significantly improve the inverse results. It can not only reconstruct the sharp interfaces between layers, but also can obtain conductivities close to the true value. (paper)

  5. Detection and characterization of lightning-based sources using continuous wavelet transform: application to audio-magnetotellurics

    Science.gov (United States)

    Larnier, H.; Sailhac, P.; Chambodut, A.

    2018-01-01

    Atmospheric electromagnetic waves created by global lightning activity contain information about electrical processes of the inner and the outer Earth. Large signal-to-noise ratio events are particularly interesting because they convey information about electromagnetic properties along their path. We introduce a new methodology to automatically detect and characterize lightning-based waves using a time-frequency decomposition obtained through the application of continuous wavelet transform. We focus specifically on three types of sources, namely, atmospherics, slow tails and whistlers, that cover the frequency range 10 Hz to 10 kHz. Each wave has distinguishable characteristics in the time-frequency domain due to source shape and dispersion processes. Our methodology allows automatic detection of each type of event in the time-frequency decomposition thanks to their specific signature. Horizontal polarization attributes are also recovered in the time-frequency domain. This procedure is first applied to synthetic extremely low frequency time-series with different signal-to-noise ratios to test for robustness. We then apply it on real data: three stations of audio-magnetotelluric data acquired in Guadeloupe, oversea French territories. Most of analysed atmospherics and slow tails display linear polarization, whereas analysed whistlers are elliptically polarized. The diversity of lightning activity is finally analysed in an audio-magnetotelluric data processing framework, as used in subsurface prospecting, through estimation of the impedance response functions. We show that audio-magnetotelluric processing results depend mainly on the frequency content of electromagnetic waves observed in processed time-series, with an emphasis on the difference between morning and afternoon acquisition. Our new methodology based on the time-frequency signature of lightning-induced electromagnetic waves allows automatic detection and characterization of events in audio-magnetotelluric

  6. Synthetic Modeling of A Geothermal System Using Audio-magnetotelluric (AMT) and Magnetotelluric (MT)

    Science.gov (United States)

    Mega Saputra, Rifki; Widodo

    2017-04-01

    Indonesia has 40% of the world’s potential geothermal resources with estimated capacity of 28,910 MW. Generally, the characteristic of the geothermal system in Indonesia is liquid-dominated systems, which driven by volcanic activities. In geothermal exploration, electromagnetic methods are used to map structures that could host potential reservoirs and source rocks. We want to know the responses of a geothermal system using synthetic data of Audio-magnetotelluric (AMT) and Magnetotelluric (MT). Due to frequency range, AMT and MT data can resolve the shallow and deeper structure, respectively. 1-D models have been performed using AMT and MT data. The results indicate that AMT and MT data give detailed conductivity distribution of geothermal structure.

  7. Portable audio magnetotellurics - experimental measurements and joint inversion with radiomagnetotelluric data from Gotland, Sweden

    Science.gov (United States)

    Shan, Chunling; Kalscheuer, Thomas; Pedersen, Laust B.; Erlström, Mikael; Persson, Lena

    2017-08-01

    Field setup of an audio magnetotelluric (AMT) station is a very time consuming and heavy work load. In contrast, radio magnetotelluric (RMT) equipment is more portable and faster to deploy but has shallower investigation depth owing to its higher signal frequencies. To increase the efficiency in the acquisition of AMT data from 10 to 300 Hz, we introduce a modification of the AMT method, called portable audio magnetotellurics (PAMT), that uses a lighter AMT field system and (owing to the disregard of signals at frequencies of less than 10 Hz) shortened data acquisition time. PAMT uses three magnetometers pre-mounted on a rigid frame to measure magnetic fields and steel electrodes to measure electric fields. Field tests proved that the system is stable enough to measure AMT fields in the given frequency range. A PAMT test measurement was carried out on Gotland, Sweden along a 3.5 km profile to study the ground conductivity and to map shallow Silurian marlstone and limestone formations, deeper Silurian, Ordovician and Cambrian sedimentary structures and crystalline basement. RMT data collected along a coincident profile and regional airborne very low frequency (VLF) data support the interpretation of our PAMT data. While only the RMT and VLF data constrain a shallow ( 20-50 m deep) transition between Silurian conductive ( 1000 Ωm resistivity) limestone, the single-method inversion models of both the PAMT and the RMT data show a transition into a conductive layer of 3 to 30 Ωm resistivity at 80 m depth suggesting the compatibility of the two data sets. This conductive layer is interpreted as saltwater saturated succession of Silurian, Ordovician and Cambrian sedimentary units. Towards the lower boundary of this succession (at 600 m depth according to boreholes), only the PAMT data constrain the structure. As supported by modelling tests and sensitivity analysis, the PAMT data only contain a vague indication of the underlying crystalline basement. A PAMT and RMT

  8. Joint Audio-Magnetotelluric and Passive Seismic Imaging of the Cerdanya Basin

    Science.gov (United States)

    Gabàs, A.; Macau, A.; Benjumea, B.; Queralt, P.; Ledo, J.; Figueras, S.; Marcuello, A.

    2016-09-01

    The structure of Cerdanya Basin (north-east of Iberian Peninsula) is partly known from geological cross sections, geological maps and vintage geophysical data. However, these data do not have the necessary resolution to characterize some parts of Cerdanya Basin such as the thickness of soft soil, geometry of bedrock or geometry of geological units and associated faults. For all these reasons, the main objective of this work is to improve this deficiency carrying out a detailed study in this Neogene basin applying jointly the combination of passive seismic methods ( H/V spectral ratio and seismic array) and electromagnetic methods (audio-magnetotelluric and magnetotelluric method). The passive seismic techniques provide valuable information of geometry of basement along the profile. The maximum depth is located near Alp village with a bedrock depth of 500 m. The bedrock is located in surface at both sites of profile. The Neogene sediments present a shear-wave velocity between 400 and 1000 m/s, and the bedrock basement presents a shear-wave velocity values between 1700 and 2200 m/s. These results are used as a priori information to create a 2D resistivity initial model which constraints the inversion process of electromagnetic data. We have obtained a 2D resistivity model which is characterized by (1) a heterogeneous conductivity zone (limestones and slates at NW and conglomerates and microconglomerates at SE). The resistive zone is truncated by a discontinuity at the south-east of the profile which is interpreted as the Alp-La Tet Fault. This discontinuity is represented by a more conductive zone (600 Ohm m approx.) and is explained as a combination of fractured rock and a fluid network. The result highlights that the support between different geophysical methods is essential in producing geophysical meaningful models.

  9. An audio-magnetotelluric investigation of the eastern margin of the Mamfe Basin, Cameroon

    International Nuclear Information System (INIS)

    Tabod, C.T.; Tokam Kamga, A.-P.; Manguelle-Dicoum, E.; Nouayou, R.; Nguiya, S.

    2006-12-01

    Audio-magnetotelluric (AMT) data has been used to study the eastern margin of the Mamfe sedimentary basin along two profiles. Both profiles run across the sedimentary-metamorphic transition zone in this part of the basin. A 1-D interpretation of these data has been carried out using frequency profiling, pseudosections and geoelectric sections. Studying the propagation of the electric field at each station also gives an initial qualitative understanding of the possible layering of the subsurface at the station. A dioritic basement intrusion into the sediments has been identified along one of these profiles and a granitic intrusion under the other. Faults have been identified along both profiles marking the transition from sedimentary to metamorphic rocks at the eastern edge of the basin. However, this transition is complex and not smooth. This complexity can probably be explained by the fact that regional lithospheric stretching must have been responsible for the formation of this basin resulting in faulting in the eastern margin, thus strengthening the link between this basin and the Benue Trough of Nigeria. (author)

  10. Audio-magnetotelluric (AMT) study to investigate the genesis of Mujil hill

    Science.gov (United States)

    Rahmania, Suryanto, Wiwit

    2017-07-01

    Gunung Mujil is an isolated hill located near Pondoworejo village, Kalibawang sub-district, Kulon Progo district, and Special Province of Yogyakarta. The hill is part of the eastern Kulon Progo mountain range extended relatively in the North-South direction. The lithology of the hill consists of andesite breccia and it's similar with the Old Andesite Formation that built the Kulon Progo Mountains. There are at least two hypothesis about the genesis and the formation mechanism of this hill, (1) it was formed by debris mass from Kulon Progo Mountains, and (2) ) it was formed by an intrusion. Our study intended to determine the subsurface resistivity below the hill and to relating those results to with the scenario of the genesis of the Mujil hill. We conducted Audio-magnetotellurics (AMT) measurements along two lines survey crossing the Mujil hill consisting of 20 measurements. Since the measurements are located near the villages, most of the data has a fair to bad quality and only one station yielded an excellent data. A 1D Forward modeling was then applied to find best-fit model of the AMT data. The results shows that the Mujil hill was built by debris mass of the Old Andesite Formation from Kulon Progo mountain which is represented by a lower resistivity value under the Mujil hill.

  11. Three-dimensional audio-magnetotelluric sounding in monitoring coalbed methane reservoirs

    Science.gov (United States)

    Wang, Nan; Zhao, Shanshan; Hui, Jian; Qin, Qiming

    2017-03-01

    Audio-magnetotelluric (AMT) sounding is widely employed in rapid resistivity delineation of objective geometry in near surface exploration. According to reservoir patterns and electrical parameters obtained in Qinshui Basin, China, two-dimensional and three-dimensional synthetic "objective anomaly" models were designed and inverted with the availability of a modular system for electromagnetic inversion (ModEM). The results revealed that 3-D full impedance inversion yielded the subsurface models closest to synthetic models. One or more conductive targets were correctly recovered. Therefore, conductive aquifers in the study area, including hydrous coalbed methane (CBM) reservoirs, were suggested to be the interpretation signs for reservoir characterization. With the aim of dynamic monitoring of CBM reservoirs, the AMT surveys in continuous years (June 2013-May 2015) were carried out. 3-D inversion results demonstrated that conductive anomalies accumulated around the producing reservoirs at the corresponding depths if CBM reservoirs were in high water production rates. In contrast, smaller conductive anomalies were generally identical with rapid gas production or stopping production of reservoirs. These analyses were in accordance with actual production history of CBM wells. The dynamic traces of conductive anomalies revealed that reservoir water migrated deep or converged in axial parts and wings of folds, which contributed significantly to formations of CBM traps. Then the well spacing scenario was also evaluated based on the dynamic production analysis. Wells distributed near closed faults or flat folds, rather than open faults, had CBM production potential to ascertain stable gas production. Therefore, three-dimensional AMT sounding becomes an attractive option with the ability of dynamic monitoring of CBM reservoirs, and lays a solid foundation of quantitative evaluation of reservoir parameters.

  12. Advances in audio source seperation and multisource audio content retrieval

    Science.gov (United States)

    Vincent, Emmanuel

    2012-06-01

    Audio source separation aims to extract the signals of individual sound sources from a given recording. In this paper, we review three recent advances which improve the robustness of source separation in real-world challenging scenarios and enable its use for multisource content retrieval tasks, such as automatic speech recognition (ASR) or acoustic event detection (AED) in noisy environments. We present a Flexible Audio Source Separation Toolkit (FASST) and discuss its advantages compared to earlier approaches such as independent component analysis (ICA) and sparse component analysis (SCA). We explain how cues as diverse as harmonicity, spectral envelope, temporal fine structure or spatial location can be jointly exploited by this toolkit. We subsequently present the uncertainty decoding (UD) framework for the integration of audio source separation and audio content retrieval. We show how the uncertainty about the separated source signals can be accurately estimated and propagated to the features. Finally, we explain how this uncertainty can be efficiently exploited by a classifier, both at the training and the decoding stage. We illustrate the resulting performance improvements in terms of speech separation quality and speaker recognition accuracy.

  13. Identification of kimberlite bodies in Brazil from a 3D audio-magnetotelluric survey

    Science.gov (United States)

    De Lugao, P. P.; Eric, C. D. O.; Loureiro, F. O.; Arantes, P. R.; Pastana, A. F.

    2015-12-01

    We report on a succesfull identification of kimberlite bodies in Brazil through the use of the electromagnetic technique audio-magnetotelluric (AMT). Macnae (1979) writes that "In one large survey in South Africa, electromagnetic (EM) techniques have proven to be remarkably effective in detecting the presence of weathered clays or epiclastic kimberlite contained within the pipes." Full tensor AMT data were acquired at 65 points (stations) in a 3D configuration with frequencies ranging from 10kHz to 1Hz. The survey was located in the NW portion of the Mato Grosso state, Brazil, in na area of thick jungle coverage. During the AMT survey, few outcrops were seen because of the dense forest cover. Usually, the occurrences found were of sand deposits, indicating the occurence of Fazenda Casa Branca and Utiariti Formations and gravel from Salto das Nuvens Formation, widely used in paving trails n this region. In the area of the survey, three main targets were confirmed/identified: Kimberlite Area 1 - a classic kimberlite in the region, with the crater facies with different clasts and distinct size. We noted the occurrence of a red-brown soil and an unusual vegetation in this area. The resistivity model provided confirmed the presence of Kimberlite Area 1 and was used to identify other two areas. Area of Interest 1 - area with atypical vegetation along a trail. There is an excavation that displays soil of white color with several blocks present, there are small quartz crystal agglomerates in these blocks. The resistivity model cleary shows a conductive body here, indicative of the presence of a kimberlite. Area of Interest 2 - the presence of a kimberlite was confirmed, not exactly where the targeted Area 2 was, but the southwest of it. Close to this area, there was a very fine rock and a few blocks of pure silica, probably indicating a kimberlitic intrusion. In summary, the 3D resistivity model in depth obtained from inversion of the AMT data confirmed and identified

  14. Identification the geothermal system using 1-D audio-magnetotelluric inversion in Lamongan volcano field, East Java, Indonesia

    Science.gov (United States)

    Ilham, N.; Niasari, S. W.

    2018-04-01

    Tiris village, Probolinggo, East Java, is one of geothermal potential areas in Indonesia. This area is located in a valley flank of Mount Lamongan and Argopuro volcanic complex. This research aimed to identify a geothermal system at Tiris area, particularly the fluid pathways. The geothermal potential can be seen from the presence of warm springs with temperature ranging 35-45°C. The warm spring locations are aligned in the same orientation with major fault structure in the area. The fault structure shows dominant northwest-southeast orientation. We used audio-magnetotelluric data in the frequency range of 10 Hz until 92 kHz. The total magnetotelluric sites are 6. From the data analysis, most of the data orientation were 2-D with geo-electrical direction north-south. We used 1-D inversion using Newton algorithm. The 1-D inversion resulted in low resistive anomaly that corresponds to Lamongan lavas. Additionally, the depth of the resistor are different between the area to the west (i.e. 75 m) and to the east (i.e. 25 m). This indicates that there is a fault around the aligned maar (e.g. Ranu Air).

  15. a Study of Electrical Structures of Shanchiao Fault in Taiwan Using Audio-Frequency Magnetotelluric (amt) Method

    Science.gov (United States)

    Yang, C.; Liu, H.

    2007-12-01

    The Shanchiao normal fault is located in the western edge of Taipei basin in an N-E to S-W direction. Since the fault crosses through the Tertiary basement of Taipei basin, it is classified as an active fault. The overburden of the fault is sediments with a thickness around few tenth meters to several hundred meters. No detailed studies related to the Shanchiao fault in the western side of Taipei Basin are reported. In addition, there are no outcrops which have been found on the surface. This part of fault seems to be a potential source of disaster for the development of western Taipei basin. The audio-frequency magnetotelluric (AMT) method is a technique used to find the vertical resistivity distribution of formation and to characterize a fault structure through the ground surface based measurement. Based on the geological investigation and lithogic information from wells, the AMT data from six soundings at Wugu site, nine soundings at XinZhuang site and eight sounding at GuanDu site were collected on a NE-SW profile, approximately perpendicular to the prospective strike of the Shanchiao fault. AMT data were then inverted for two- dimension resistivity models (sections). The features of all resistivity sections are similar; an apparent drop in resistivity was observed at the position correlates to the western edge of Taipei basin. The predicted location of Shanchiao fault matches was verified by the lithologic sections of boreholes nearby. It indicates that the Shanchiao normal fault may associate with the subsidence of Taipei basin. The basement is clearly detected as a geoelectrical unit having resistivity less than 250 . It has a trend of increasing its depth toward S-E. The uplift of layers in the east of resistivity sections may affect by the XinZhuang thrust fault from the east. As with each site, the calculated resistivity may affect by cultural interference. However, the AMT survey still successfully delineates the positions and features of the Shanchiao

  16. Hydrothermal system beneath the crater of Tarumai volcano, Japan : 3-D resistivity structure revealed using audio-magnetotellurics and induction vector

    OpenAIRE

    Yamaya, Yusuke; Mogi, Toru; Hashimoto, Takeshi; Ichihara, Hiroshi

    2009-01-01

    Audio-magnetotelluric (AMT) measurements were recorded in the crater area of Tarumai volcano, northeastern Japan. This survey brought the specific structures beneath the lava dome of Tarumai volcano, enabling us to interpret the relationship between the subsurface structure and fumarolic activity in the vicinity of a lava dome. Three-dimensional resistivity modeling was performed to achieve this purpose. The measured induction vectors pointed toward the center of the dome, implying the topogr...

  17. Audio-magnetotelluric surveys to constrain the origin of a network of narrow synclines in Eocene limestone, Western Desert, Egypt

    Science.gov (United States)

    Tarabees, Elhamy A.; Tewksbury, Barbara J.; Mehrtens, Charlotte J.; Younis, Abdellatif

    2017-12-01

    Recent work with high resolution satellite imagery has revealed a network of narrow synclines developed during the Oligocene or Miocene over tens of thousands of square kilometers in Eocene limestone of the Thebes Group in the Western Desert of Egypt. The synclines are non-tectonic, and their scale and geometry strongly resemble sag synclines in Qatar that were produced by dissolution of subsurface evaporites and resulting sag of overlying layers. Evaporite dissolution cannot explain the Egypt synclines, because subsurface evaporites of any significance have never been reported in this part of Egypt. In this study, we use audio-magnetotelluric surveys to illuminate the subsurface under the synclines in order to constrain possible models for their formation. We suspected karst dissolution at depth, and, given a modern water table depth of over 400 m, we expected that dry fracture networks and void spaces under the synclines might result in higher electrical resistivities than surrounding coherent limestone. We also anticipated a significant change from high to low resistivity at the contact between the Thebes Group and the underlying Esna Shale at depths of 400 m or more. Instead, we found localized low resistivity zones extending from about 50-100 m below the surface to depths of more than 400 m that are strongly correlated with synclines. We suggest that these localized low resistivity zones are filled with artesian groundwater that has insufficient hydraulic head to rise to the modern topographic surface and that is localized in subsurface voids and collapse breccias produced by dissolution. Sag of overlying limestone layers is a reasonable model for syncline formation but, given the Oligocene/Miocene age of the synclines, dissolution and sag would be unrelated to young groundwater processes.

  18. pyAudioAnalysis: An Open-Source Python Library for Audio Signal Analysis.

    Science.gov (United States)

    Giannakopoulos, Theodoros

    2015-01-01

    Audio information plays a rather important role in the increasing digital content that is available today, resulting in a need for methodologies that automatically analyze such content: audio event recognition for home automations and surveillance systems, speech recognition, music information retrieval, multimodal analysis (e.g. audio-visual analysis of online videos for content-based recommendation), etc. This paper presents pyAudioAnalysis, an open-source Python library that provides a wide range of audio analysis procedures including: feature extraction, classification of audio signals, supervised and unsupervised segmentation and content visualization. pyAudioAnalysis is licensed under the Apache License and is available at GitHub (https://github.com/tyiannak/pyAudioAnalysis/). Here we present the theoretical background behind the wide range of the implemented methodologies, along with evaluation metrics for some of the methods. pyAudioAnalysis has been already used in several audio analysis research applications: smart-home functionalities through audio event detection, speech emotion recognition, depression classification based on audio-visual features, music segmentation, multimodal content-based movie recommendation and health applications (e.g. monitoring eating habits). The feedback provided from all these particular audio applications has led to practical enhancement of the library.

  19. Audio-magnetotelluric investigation of sulfide mineralization in Proterozoic-Archean greenstone belts of Eastern Indian Craton

    Science.gov (United States)

    Singh, Shailendra; Maurya, Ved P.; Singh, Roshan K.; Srivastava, Shalivahan; Tripathi, Anurag; Adhikari, P. K.

    2018-04-01

    Greenstone belts are well known for gold occurrences at different regions of the world. The Dhanjori basin in the eastern Singhbhum region shows major characteristics of a rifted greenstone belt. Initially, we conducted 14 audio-magnetotelluric (AMT) measurements for a profile of ˜ 20 km in the frequency range of 1 kHz to 10 Hz over this rather complex geologic environment covering Dhanjori Volcanics (DhV) and Kolhan Group (KG). Subsequently, gravity and magnetic surveys were also conducted over this AMT profile. The purpose of the survey was to identify and map conductive features and to relate them to metallogeny of the area along with the mapping of the basement of Dhanjori basin. The strike analysis showed N30°W strike for DhV for all the frequencies and for sites over KG domain in the frequency range of 100-10 Hz, but for KG domain, the obtained strike in 1 kHz to 100 Hz is N45°E. As the combination of transverse electric (TE), transverse magnetic (TM) and tipper (Tzy) can recover the electrical signature in complex geological environment, we discuss the conductivity model obtained from TE+TM+Tzy only. The inversion was carried for the regional profile with 14 sites and for 7 sites over KG domain. Conductivity model shows two well resolved conductors, one each in KG and Quartz Pebble Conglomerate Dhanjori (QPCD) domains respectively showing common linked concordant features between these regional and KG profiles. The conductors are interpreted as sulfide mineralization linked with QPCD group of rocks which may host gold. These conductors are also horizontally disposed due to the intrusive younger Mayurbhanj Granite. These intrusives correlate well with the gravity modeling as well. The thickness of the Dhanjori basin at the central is about 3.0 km, similar to that from gravity modeling. The conductivity model also indicates the presence of shallow conductors, but could not be resolved due to lack of high frequency data. However, the results from the close

  20. Bit rates in audio source coding

    NARCIS (Netherlands)

    Veldhuis, Raymond N.J.

    1992-01-01

    The goal is to introduce and solve the audio coding optimization problem. Psychoacoustic results such as masking and excitation pattern models are combined with results from rate distortion theory to formulate the audio coding optimization problem. The solution of the audio optimization problem is a

  1. DOA Estimation of Audio Sources in Reverberant Environments

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Nielsen, Jesper Kjær; Heusdens, Richard

    2016-01-01

    Reverberation is well-known to have a detrimental impact on many localization methods for audio sources. We address this problem by imposing a model for the early reflections as well as a model for the audio source itself. Using these models, we propose two iterative localization methods...... that estimate the direction-of-arrival (DOA) of both the direct path of the audio source and the early reflections. In these methods, the contribution of the early reflections is essentially subtracted from the signal observations before localization of the direct path component, which may reduce the estimation...

  2. Underdetermined Blind Audio Source Separation Using Modal Decomposition

    Directory of Open Access Journals (Sweden)

    Abdeldjalil Aïssa-El-Bey

    2007-03-01

    Full Text Available This paper introduces new algorithms for the blind separation of audio sources using modal decomposition. Indeed, audio signals and, in particular, musical signals can be well approximated by a sum of damped sinusoidal (modal components. Based on this representation, we propose a two-step approach consisting of a signal analysis (extraction of the modal components followed by a signal synthesis (grouping of the components belonging to the same source using vector clustering. For the signal analysis, two existing algorithms are considered and compared: namely the EMD (empirical mode decomposition algorithm and a parametric estimation algorithm using ESPRIT technique. A major advantage of the proposed method resides in its validity for both instantaneous and convolutive mixtures and its ability to separate more sources than sensors. Simulation results are given to compare and assess the performance of the proposed algorithms.

  3. Underdetermined Blind Audio Source Separation Using Modal Decomposition

    Directory of Open Access Journals (Sweden)

    Aïssa-El-Bey Abdeldjalil

    2007-01-01

    Full Text Available This paper introduces new algorithms for the blind separation of audio sources using modal decomposition. Indeed, audio signals and, in particular, musical signals can be well approximated by a sum of damped sinusoidal (modal components. Based on this representation, we propose a two-step approach consisting of a signal analysis (extraction of the modal components followed by a signal synthesis (grouping of the components belonging to the same source using vector clustering. For the signal analysis, two existing algorithms are considered and compared: namely the EMD (empirical mode decomposition algorithm and a parametric estimation algorithm using ESPRIT technique. A major advantage of the proposed method resides in its validity for both instantaneous and convolutive mixtures and its ability to separate more sources than sensors. Simulation results are given to compare and assess the performance of the proposed algorithms.

  4. Source biases in midlatitude magnetotelluric transfer functions due to Pc3-4 geomagnetic pulsations

    Science.gov (United States)

    Murphy, Benjamin S.; Egbert, Gary D.

    2018-01-01

    The magnetotelluric (MT) method for imaging the electrical conductivity structure of the Earth is based on the assumption that source magnetic fields can be considered quasi-uniform, such that the spatial scale of the inducing source is much larger than the intrinsic length scale of the electromagnetic induction process (the skin depth). Here, we show using EarthScope MT data that short spatial scale source magnetic fields from geomagnetic pulsations (Pc's) can violate this fundamental assumption. Over resistive regions of the Earth, the skin depth can be comparable to the short meridional range of Pc3-4 disturbances that are generated by geomagnetic field-line resonances (FLRs). In such cases, Pc's can introduce narrow-band bias in MT transfer function estimates at FLR eigenperiods ( 10-100 s). Although it appears unlikely that these biases will be a significant problem for data inversions, further study is necessary to understand the conditions under which they may distort inverse solutions.[Figure not available: see fulltext.

  5. Understanding hydrothermal circulation patterns at a low-enthalpy thermal spring using audio-magnetotelluric data: A case study from Ireland

    Science.gov (United States)

    Blake, Sarah; Henry, Tiernan; Muller, Mark R.; Jones, Alan G.; Moore, John Paul; Murray, John; Campanyà, Joan; Vozar, Jan; Walsh, John; Rath, Volker

    2016-09-01

    Kilbrook spring is a thermal spring in east-central Ireland. The temperatures in the spring are the highest recorded for any thermal spring in Ireland (maximum of 25 °C). The temperature is elevated with respect to average Irish groundwater temperatures (9.5-10.5 °C), and represents a geothermal energy potential, which is currently under evaluation. A multi-disciplinary investigation based upon an audio-magnetotelluric (AMT) survey, and hydrochemical analysis including time-lapse temperature and chemistry measurements, has been undertaken with the aims of investigating the provenance of the thermal groundwater and characterising the geological structures facilitating groundwater circulation in the bedrock. The three-dimensional (3-D) electrical resistivity model of the subsurface at Kilbrook spring was obtained by the inversion of AMT impedances and vertical magnetic transfer functions. The model is interpreted alongside high resolution temperature and electrical conductivity measurements, and a previous hydrochemical analysis. The hydrochemical analysis and time-lapse measurements suggest that the thermal waters have a relatively stable temperature and major ion hydrochemistry, and flow within the limestones of the Carboniferous Dublin Basin at all times. The 3-D resistivity model of the subsurface reveals a prominent NNW aligned structure within a highly resistive limestone lithology that is interpreted as a dissolutionally enhanced strike-slip fault, of Cenozoic age. The karstification of this structure, which extends to depths of at least 500 m directly beneath the spring, has provided conduits that facilitate the operation of a relatively deep hydrothermal circulation pattern (likely estimated depths between 560 and 1000 m) within the limestone succession of the Dublin Basin. The results of this study support the hypothesis that the winter thermal maximum and simultaneous increased discharge at Kilbrook spring is the result of rapid infiltration, heating and

  6. MARE2DEM: a 2-D inversion code for controlled-source electromagnetic and magnetotelluric data

    Science.gov (United States)

    Key, Kerry

    2016-10-01

    This work presents MARE2DEM, a freely available code for 2-D anisotropic inversion of magnetotelluric (MT) data and frequency-domain controlled-source electromagnetic (CSEM) data from onshore and offshore surveys. MARE2DEM parametrizes the inverse model using a grid of arbitrarily shaped polygons, where unstructured triangular or quadrilateral grids are typically used due to their ease of construction. Unstructured grids provide significantly more geometric flexibility and parameter efficiency than the structured rectangular grids commonly used by most other inversion codes. Transmitter and receiver components located on topographic slopes can be tilted parallel to the boundary so that the simulated electromagnetic fields accurately reproduce the real survey geometry. The forward solution is implemented with a goal-oriented adaptive finite-element method that automatically generates and refines unstructured triangular element grids that conform to the inversion parameter grid, ensuring accurate responses as the model conductivity changes. This dual-grid approach is significantly more efficient than the conventional use of a single grid for both the forward and inverse meshes since the more detailed finite-element meshes required for accurate responses do not increase the memory requirements of the inverse problem. Forward solutions are computed in parallel with a highly efficient scaling by partitioning the data into smaller independent modeling tasks consisting of subsets of the input frequencies, transmitters and receivers. Non-linear inversion is carried out with a new Occam inversion approach that requires fewer forward calls. Dense matrix operations are optimized for memory and parallel scalability using the ScaLAPACK parallel library. Free parameters can be bounded using a new non-linear transformation that leaves the transformed parameters nearly the same as the original parameters within the bounds, thereby reducing non-linear smoothing effects. Data

  7. BAT: An open-source, web-based audio events annotation tool

    OpenAIRE

    Blai Meléndez-Catalan, Emilio Molina, Emilia Gómez

    2017-01-01

    In this paper we present BAT (BMAT Annotation Tool), an open-source, web-based tool for the manual annotation of events in audio recordings developed at BMAT (Barcelona Music and Audio Technologies). The main feature of the tool is that it provides an easy way to annotate the salience of simultaneous sound sources. Additionally, it allows to define multiple ontologies to adapt to multiple tasks and offers the possibility to cross-annotate audio data. Moreover, it is easy to install and deploy...

  8. Exploration of buried carbonate aquifers by the inverse and forward modelling of the Controlled Source Audio-Magnetotelluric data

    Science.gov (United States)

    Šumanovac, Franjo; Orešković, Jasna

    2018-06-01

    On the selected cases, Gotalovec in the area of Pannonian basin and Baška in the Dinaridic karst area, that are representing a common hydrogeological model in both regions of Croatia, CSAMT data together with data of other geophysical methods (electrical resistivity tomography, electrical sounding and seismic reflection) enabled the definition of a reliable prognostic geological model. The model consists of carbonate aquifer which underlies an impermeable thick package of clastic deposits. There are great variations of the dolomitic aquifer depths in the Gotalovec area due to strong tectonic activity, while in the Baška area depth changes are caused by the layer folding. The CSAMT method provides the most complete data on lithological and structural relationships in cases of hydrogeological targets deeper than 100 m. Based on the presented models we can conclude that the CSAMT method can provide greater exploration depth than electrical resistivity tomography (ERT) and can be considered as a fundamental geophysical method for exploration of buried carbonate aquifers, deeper than 100 m. But, the CSAMT research may demonstrate its advantages only in the case of very dense layout of CSAMT stations (25-50 m), due to the greater sensitivity to noise in relation to resistivity methods. Interpretation of CSAMT data is more complex in relation to resistivity methods, and a forward modelling method sometimes gives better results than an inversion due to possibility of the use of additional data acquired by other geophysical methods (ERT, electrical sounding and seismic reflection). At greater depths, the resolution of all electrical methods including the CSAMT method is significantly reduced, and seismic reflection can be very useful to resolve deeper lithological interfaces.

  9. Identification of Sparse Audio Tampering Using Distributed Source Coding and Compressive Sensing Techniques

    Directory of Open Access Journals (Sweden)

    Valenzise G

    2009-01-01

    Full Text Available In the past few years, a large amount of techniques have been proposed to identify whether a multimedia content has been illegally tampered or not. Nevertheless, very few efforts have been devoted to identifying which kind of attack has been carried out, especially due to the large data required for this task. We propose a novel hashing scheme which exploits the paradigms of compressive sensing and distributed source coding to generate a compact hash signature, and we apply it to the case of audio content protection. The audio content provider produces a small hash signature by computing a limited number of random projections of a perceptual, time-frequency representation of the original audio stream; the audio hash is given by the syndrome bits of an LDPC code applied to the projections. At the content user side, the hash is decoded using distributed source coding tools. If the tampering is sparsifiable or compressible in some orthonormal basis or redundant dictionary, it is possible to identify the time-frequency position of the attack, with a hash size as small as 200 bits/second; the bit saving obtained by introducing distributed source coding ranges between 20% to 70%.

  10. A seafloor electromagnetic receiver for marine magnetotellurics and marine controlled-source electromagnetic sounding

    Science.gov (United States)

    Chen, Kai; Wei, Wen-Bo; Deng, Ming; Wu, Zhong-Liang; Yu, Gang

    2015-09-01

    In planning and executing marine controlled-source electromagnetic methods, seafloor electromagnetic receivers must overcome the problems of noise, clock drift, and power consumption. To design a receiver that performs well and overcomes the abovementioned problems, we performed forward modeling of the E-field abnormal response and established the receiver's characteristics. We describe the design optimization and the properties of each component, that is, low-noise induction coil sensor, low-noise Ag/AgCl electrode, low-noise chopper amplifier, digital temperature-compensated crystal oscillator module, acoustic telemetry modem, and burn wire system. Finally, we discuss the results of onshore and offshore field tests to show the effectiveness of the developed seafloor electromagnetic receiver and its performance: typical E-field noise of 0.12 nV/m/rt(Hz) at 0.5 Hz, dynamic range higher than 120 dB, clock drift lower than 1 ms/day, and continuous operation of at least 21 days.

  11. DOA and Pitch Estimation of Audio Sources using IAA-based Filtering

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Christensen, Mads Græsbøll

    2014-01-01

    For decades, it has been investigated how to separately solve the problems of both direction-of-arrival (DOA) and pitch estimation. Recently, it was found that estimating these parameters jointly from multichannel recordings of audio can be extremely beneficial. Many joint estimators are based...... on knowledge of the inverse sample covariance matrix. Typically, this covariance is estimated using the sample covariance matrix, but for this estimate to be full rank, many temporal samples are needed. In cases with non-stationary signals, this is a serious limitation. We therefore investigate how a recent...... joint DOA and pitch filtering-based estimator can be combined with the iterative adaptive approach to circumvent this limitation in joint DOA and pitch estimation of audio sources. Simulations show a clear improvement compared to when using the sample covariance matrix and the considered approach also...

  12. Audio Source Separation in Reverberant Environments Using β-Divergence-Based Nonnegative Factorization

    DEFF Research Database (Denmark)

    Fakhry, Mahmoud; Svaizer, Piergiorgio; Omologo, Maurizio

    2017-01-01

    -maximization algorithm and used to separate the signals by means of multichannel Wiener filtering. We propose to estimate these parameters by applying nonnegative factorization based on prior information on source variances. In the nonnegative factorization, spectral basis matrices can be defined as the prior...... information. The matrices can be either extracted or indirectly made available through a redundant library that is trained in advance. In a separate step, applying nonnegative tensor factorization, two algorithms are proposed in order to either extract or detect the basis matrices that best represent......In Gaussian model-based multichannel audio source separation, the likelihood of observed mixtures of source signals is parametrized by source spectral variances and by associated spatial covariance matrices. These parameters are estimated by maximizing the likelihood through an expectation...

  13. Intelligent audio analysis

    CERN Document Server

    Schuller, Björn W

    2013-01-01

    This book provides the reader with the knowledge necessary for comprehension of the field of Intelligent Audio Analysis. It firstly introduces standard methods and discusses the typical Intelligent Audio Analysis chain going from audio data to audio features to audio recognition.  Further, an introduction to audio source separation, and enhancement and robustness are given. After the introductory parts, the book shows several applications for the three types of audio: speech, music, and general sound. Each task is shortly introduced, followed by a description of the specific data and methods applied, experiments and results, and a conclusion for this specific task. The books provides benchmark results and standardized test-beds for a broader range of audio analysis tasks. The main focus thereby lies on the parallel advancement of realism in audio analysis, as too often today’s results are overly optimistic owing to idealized testing conditions, and it serves to stimulate synergies arising from transfer of ...

  14. Audio-Visual Fusion for Sound Source Localization and Improved Attention

    International Nuclear Information System (INIS)

    Lee, Byoung Gi; Choi, Jong Suk; Yoon, Sang Suk; Choi, Mun Taek; Kim, Mun Sang; Kim, Dai Jin

    2011-01-01

    Service robots are equipped with various sensors such as vision camera, sonar sensor, laser scanner, and microphones. Although these sensors have their own functions, some of them can be made to work together and perform more complicated functions. AudioFvisual fusion is a typical and powerful combination of audio and video sensors, because audio information is complementary to visual information and vice versa. Human beings also mainly depend on visual and auditory information in their daily life. In this paper, we conduct two studies using audioFvision fusion: one is on enhancing the performance of sound localization, and the other is on improving robot attention through sound localization and face detection

  15. Audio-Visual Fusion for Sound Source Localization and Improved Attention

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byoung Gi; Choi, Jong Suk; Yoon, Sang Suk; Choi, Mun Taek; Kim, Mun Sang [Korea Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Dai Jin [Pohang University of Science and Technology, Pohang (Korea, Republic of)

    2011-07-15

    Service robots are equipped with various sensors such as vision camera, sonar sensor, laser scanner, and microphones. Although these sensors have their own functions, some of them can be made to work together and perform more complicated functions. AudioFvisual fusion is a typical and powerful combination of audio and video sensors, because audio information is complementary to visual information and vice versa. Human beings also mainly depend on visual and auditory information in their daily life. In this paper, we conduct two studies using audioFvision fusion: one is on enhancing the performance of sound localization, and the other is on improving robot attention through sound localization and face detection.

  16. Report on a Magnetotelluric Study in Kangerlussuaq, West Greenland

    DEFF Research Database (Denmark)

    Kother, Livia Kathleen; Junge, A.; Löwer, A.

    2011-01-01

    Despite a well-mapped, interesting surface geology, deep sounding geophysical studies like seismics or magnetotellurics have been used very rarely in Greenland. The aim of this article is to present the preliminary results of a magnetotelluric study performed in the area of Kangerlussuaq, West Gr...... Greenland. The estimated transfer functions will be used in the future for 2-D and 3-D modelling of subsurface resistivity structures, the inuence of the electrically conductive ocean, as well as the source geometry in the auroral oval.......Despite a well-mapped, interesting surface geology, deep sounding geophysical studies like seismics or magnetotellurics have been used very rarely in Greenland. The aim of this article is to present the preliminary results of a magnetotelluric study performed in the area of Kangerlussuaq, West...

  17. A Lower-Crust or Mantle Source for Mineralizing Fluids Beneath the Olympic Dam IOCG Deposit, Australia: New Evidence From Magnetotelluric Sounding

    Science.gov (United States)

    Heinson, G.

    2005-12-01

    The iron-oxide-copper-gold (IOCG) Olympic Dam (OD) deposit, situated along the margin of the Proterozoic Gawler Craton, South Australia, is the world's largest uranium deposit, and sixth largest copper deposit; it also contains significant reserves of gold, silver and rare-earth elements (REE). Gaining a better understanding of the mechanisms for genesis of the economic mineralisation is fundamental for defining exploration models in similar crustal-settings. To delineate crustal structures that may constrain mineral system fluid pathways, coincident deep crustal seismic and magnetotelluric (MT) transects were obtained along a 220 km section that crosses OD and the major crustal boundaries. We present results from 58 long-period (10-104 s) MT sites, with site spacing of 5 to 10 km. A 2D inversion of all MT data to a depth of 100 km shows four notable features: (a) sedimentary cover sequences with low resistivity (1000 Ω.m) Archaean crustal core, from a more conductive crust to the north (typically <500 Ω.m); (c) to the north of OD, the crust to about 20 km is quite resistive (~1000 Ω.m), but the lower crust is much more conductive (<100 Ω.m); and (d) beneath OD, we image a low-resistivity region (<100 Ω.m) throughout the crust, coincident with a seismically transparent region. We argue that the cause of the low-resistivity and low-reflectivity region beneath OD may be due to the upward movement of crustal-volatiles that have deposited conductive graphite mineralisation along grain boundaries, simultaneously annihilating acoustic impedance boundaries. The source of the volatiles may be from the mantle-degassing or retrograde metamorphism of the lower crust associated with Proterozoic crustal deformation.

  18. MTpy: A Python toolbox for magnetotellurics

    Science.gov (United States)

    Krieger, Lars; Peacock, Jared R.

    2014-01-01

    We present the software package MTpy that allows handling, processing, and imaging of magnetotelluric (MT) data sets. Written in Python, the code is open source, containing sub-packages and modules for various tasks within the standard MT data processing and handling scheme. Besides the independent definition of classes and functions, MTpy provides wrappers and convenience scripts to call standard external data processing and modelling software.

  19. Audio Papers

    DEFF Research Database (Denmark)

    Groth, Sanne Krogh; Samson, Kristine

    2016-01-01

    With this special issue of Seismograf we are happy to present a new format of articles: Audio Papers. Audio papers resemble the regular essay or the academic text in that they deal with a certain topic of interest, but presented in the form of an audio production. The audio paper is an extension...

  20. 3D modeling of magnetotelluric data unraveling the tectonic setting and sources of magmatism in the northeastern corner of Borborema Province, NE Brazil

    Science.gov (United States)

    Padilha, A. L.; Vitorello, I.; Padua, M. B.; Batista, J. C.; Fuck, R. A.

    2017-12-01

    The Borborema Province in northeast Brazil is a complex orogenic system formed by crustal blocks of different ages, origin and evolution amalgamated during the West Gondwana convergence in late Neoproterozoic-early Phanerozoic Brasiliano Orogeny. We discuss here new magnetotelluric (MT) data collected along four linear profiles crisscrossing the northeastern corner of the province to assess its deep electrical resistivity structure. Dimensionality analysis showed that a 3D electrical structure predominates in the subsurface and thus the data were modeled by a 3D MT data inversion scheme. The modeling revealed several subvertical discontinuities, with significant lateral contrast in the overall geoelectric structure, down to upper mantle depths. A major conductivity anomaly is registered in the crust beneath Neoproterozoic supracrustal rocks (Serido Group) and this anomaly deepens to upper mantle depths in the northwest direction below a zone of Paleoproterozoic plutons (Caico Complex). It has been suggested that the Serido Group was originally initiated as a sedimentary basin developed upon a Paleoproterozoic basement during a Neoproterozoic extension event related to a collisional foredeep of a south-dipping subduction slab, contrary to our northwest-dipping conductivity vergence. In case of the Caico Complex, because of the petrogenesis of its orthogneisses that indicates partial melting of a metasomatically enriched spinel-to garnet-bearing lherzolite with adakitic features, we also propose a subduction zone environment for its original magmatism. Considering the tenuous evidence indicating that this conductive anomaly could extend down into the upper mantle in the same region where teleseismic tomography register an attenuation of P waves, it can be concluded that this zone could also be the source of the metasomatic fluids and minerals observed along north-south Mesozoic volcanic plugs and flows of alkaline rocks and alkali basalts (Macau-Queimadas belt). In

  1. REGIONAL MAGNETOTELLURIC SURVEYS IN HYDROCARBON EXPLORATION, PARANA BASIN, BRAZIL.

    Science.gov (United States)

    Stanley, William D.; Saad, Antonio; Ohofugi, Walter

    1985-01-01

    The mangetotelluric geophysical method has been used effectively as a hydrocarbon exploration tool in the intracratonic Parana basin of South America. The 1-2 km thick surface basalts and buried diabase sills pose no problem for the magnetotelluric method because the natural electromagnetic fields used as the energy source pass easily through the basalt. Data for the regional study were taken on six profiles with sounding spaced 8 to 15 km apart. The magnetotelluric sounding data outline a linear uplift known as the Ponta Grossa arch. This major structural feature cuts across the northeast-trending intracratonic basin almost perpendicularly, and is injected with numerous diabase dikes. Significant electrical contrasts occur between the Permian sediments and older units, so that magnetotelluric measurements can give an indication of the regional thickness of the Permian and younger sediments to aid in interpreting hydrocarbon migration patterns and possible trap areas. Refs.

  2. Audio Twister

    DEFF Research Database (Denmark)

    Cermak, Daniel; Moreno Garcia, Rodrigo; Monastiridis, Stefanos

    2015-01-01

    Daniel Cermak-Sassenrath, Rodrigo Moreno Garcia, Stefanos Monastiridis. Audio Twister. Installation. P-Hack Copenhagen 2015, Copenhagen, DK, Apr 24, 2015.......Daniel Cermak-Sassenrath, Rodrigo Moreno Garcia, Stefanos Monastiridis. Audio Twister. Installation. P-Hack Copenhagen 2015, Copenhagen, DK, Apr 24, 2015....

  3. Audio-magnetotelluric investigation of sulfide mineralization in ...

    Indian Academy of Sciences (India)

    Shailendra Singh

    2018-03-27

    Mar 27, 2018 ... the North Singhbhum Mobile Belt of Singhbhum crustal province by ...... environments with applications to the quest for magma in long valley, California; ... States; PhD Thesis, Massachusetts Institute of Technol- ogy. Tuncer V ...

  4. Controlled Source Audio Magneto Telluric (CSAMT) studies for uranium exploration in Durgi area, Palnad sub-basin, Cuddapah basin, India

    International Nuclear Information System (INIS)

    Kumar, Indresh; Kumar, S. Vijaya; Ramesh Babu, V.; Kumar, B.V.L.; Dash, J.K.; Chaturvedi, A.K.

    2017-01-01

    Cuddapah basin is known for hosting unconformity proximal uranium deposits viz., Lambapur, Peddagattu, Chitirial and Koppunuru along the northern margin of the basin. It is well known that these deposits are mostly associated with basement granitoids in Srisailam Sub-basin, and with cover sediments in Palnad subbasin where basement topography and fault/fracture system influence the fluid flow causing basement alteration and ore deposition. Geological setup, surface manifestation of uranium anomalies and association of the hydro-uranium anomalies near Durgi area in southern part of the Palnad sub-basin, have prompted detail investigation by geophysical methods to probe greater depths. Controlled Source Audio Magneto Telluric (CSAMT) survey conducted over five decades of frequency (0.1-9600 Hz) delineated the various lithounits of Kurnool and Nallamalai Groups along with their thicknesses as there exist an appreciable resistivity contrast. Interpretation of CSAMT sounding data are constrained by resistivity logs and litholog data obtained from the boreholes drilled within the basin indicated three to four layered structure. Sub-surface 2-D and 3-D geo-electrical models are simulated by stitching 1-D layered inverted resistivity earth models. Stitched 1-D inverted resistivity sections revealed the unconformity between the Kurnool Group and Nallamalai Group along with basement undulations. The faults/fractures delineated from the CSAMT data corroborated well with the results of gravity data acquired over the same area. Simulated 3-D voxel resistivity model helped in visualising the faults/fractures, their depth extent, thickness of the Banganapalle quartzite and basement configuration. Integrated interpretation of CSAMT, gravity and borehole data facilitated in delineating the unconformity and the structural features favourable for uranium mineralisation in deeper parts of the Palnad sub-basin. (author)

  5. Balancing Audio

    DEFF Research Database (Denmark)

    Walther-Hansen, Mads

    2016-01-01

    is not thoroughly understood. In this paper I treat balance as a metaphor that we use to reason about several different actions in music production, such as adjusting levels, editing the frequency spectrum or the spatiality of the recording. This study is based on an exploration of a linguistic corpus of sound......This paper explores the concept of balance in music production and examines the role of conceptual metaphors in reasoning about audio editing. Balance may be the most central concept in record production, however, the way we cognitively understand and respond meaningfully to a mix requiring balance...

  6. Editing Audio with Audacity

    Directory of Open Access Journals (Sweden)

    Brandon Walsh

    2016-08-01

    Full Text Available For those interested in audio, basic sound editing skills go a long way. Being able to handle and manipulate the materials can help you take control of your object of study: you can zoom in and extract particular moments to analyze, process the audio, and upload the materials to a server to compliment a blog post on the topic. On a more practical level, these skills could also allow you to record and package recordings of yourself or others for distribution. That guest lecture taking place in your department? Record it and edit it yourself! Doing so is a lightweight way to distribute resources among various institutions, and it also helps make the materials more accessible for readers and listeners with a wide variety of learning needs. In this lesson you will learn how to use Audacity to load, record, edit, mix, and export audio files. Sound editing platforms are often expensive and offer extensive capabilities that can be overwhelming to the first-time user, but Audacity is a free and open source alternative that offers powerful capabilities for sound editing with a low barrier for entry. For this lesson we will work with two audio files: a recording of Bach’s Goldberg Variations available from MusOpen and another recording of your own voice that will be made in the course of the lesson. This tutorial uses Audacity 2.1.2, released January 2016.

  7. Audio Restoration

    Science.gov (United States)

    Esquef, Paulo A. A.

    The first reproducible recording of human voice was made in 1877 on a tinfoil cylinder phonograph devised by Thomas A. Edison. Since then, much effort has been expended to find better ways to record and reproduce sounds. By the mid-1920s, the first electrical recordings appeared and gradually took over purely acoustic recordings. The development of electronic computers, in conjunction with the ability to record data onto magnetic or optical media, culminated in the standardization of compact disc format in 1980. Nowadays, digital technology is applied to several audio applications, not only to improve the quality of modern and old recording/reproduction techniques, but also to trade off sound quality for less storage space and less taxing transmission capacity requirements.

  8. Introducing Python tools for magnetotellurics: MTpy

    Science.gov (United States)

    Krieger, L.; Peacock, J.; Inverarity, K.; Thiel, S.; Robertson, K.

    2013-12-01

    Within the framework of geophysical exploration techniques, the magnetotelluric method (MT) is relatively immature: It is still not as widely spread as other geophysical methods like seismology, and its processing schemes and data formats are not thoroughly standardized. As a result, the file handling and processing software within the academic community is mainly based on a loose collection of codes, which are sometimes highly adapted to the respective local specifications. Although tools for the estimation of the frequency dependent MT transfer function, as well as inversion and modelling codes, are available, the standards and software for handling MT data are generally not unified throughout the community. To overcome problems that arise from missing standards, and to simplify the general handling of MT data, we have developed the software package "MTpy", which allows the handling, processing, and imaging of magnetotelluric data sets. It is written in Python and the code is open-source. The setup of this package follows the modular approach of successful software packages like GMT or Obspy. It contains sub-packages and modules for various tasks within the standard MT data processing and handling scheme. Besides pure Python classes and functions, MTpy provides wrappers and convenience scripts to call external software, e.g. modelling and inversion codes. Even though still under development, MTpy already contains ca. 250 functions that work on raw and preprocessed data. However, as our aim is not to produce a static collection of software, we rather introduce MTpy as a flexible framework, which will be dynamically extended in the future. It then has the potential to help standardise processing procedures and at same time be a versatile supplement for existing algorithms. We introduce the concept and structure of MTpy, and we illustrate the workflow of MT data processing utilising MTpy on an example data set collected over a geothermal exploration site in South

  9. MTpy: A Python toolbox for magnetotellurics

    Science.gov (United States)

    Krieger, Lars; Peacock, Jared R.

    2014-11-01

    We present the software package MTpy that allows handling, processing, and imaging of magnetotelluric (MT) data sets. Written in Python, the code is open source, containing sub-packages and modules for various tasks within the standard MT data processing and handling scheme. Besides the independent definition of classes and functions, MTpy provides wrappers and convenience scripts to call standard external data processing and modelling software. In its current state, modules and functions of MTpy work on raw and pre-processed MT data. However, opposite to providing a static compilation of software, we prefer to introduce MTpy as a flexible software toolbox, whose contents can be combined and utilised according to the respective needs of the user. Just as the overall functionality of a mechanical toolbox can be extended by adding new tools, MTpy is a flexible framework, which will be dynamically extended in the future. Furthermore, it can help to unify and extend existing codes and algorithms within the (academic) MT community. In this paper, we introduce the structure and concept of MTpy. Additionally, we show some examples from an everyday work-flow of MT data processing: the generation of standard EDI data files from raw electric (E-) and magnetic flux density (B-) field time series as input, the conversion into MiniSEED data format, as well as the generation of a graphical data representation in the form of a Phase Tensor pseudosection.

  10. Presence and the utility of audio spatialization

    DEFF Research Database (Denmark)

    Bormann, Karsten

    2005-01-01

    The primary concern of this paper is whether the utility of audio spatialization, as opposed to the fidelity of audio spatialization, impacts presence. An experiment is reported that investigates the presence-performance relationship by decoupling spatial audio fidelity (realism) from task...... performance by varying the spatial fidelity of the audio independently of its relevance to performance on the search task that subjects were to perform. This was achieved by having conditions in which subjects searched for a music-playing radio (an active sound source) and having conditions in which...... supplied only nonattenuated audio was detrimental to performance. Even so, this group of subjects consistently had the largest increase in presence scores over the baseline experiment. Further, the Witmer and Singer (1998) presence questionnaire was more sensitive to whether the audio source was active...

  11. Semiautomatic and Automatic Cooperative Inversion of Seismic and Magnetotelluric Data

    Science.gov (United States)

    Le, Cuong V. A.; Harris, Brett D.; Pethick, Andrew M.; Takam Takougang, Eric M.; Howe, Brendan

    2016-09-01

    Natural source electromagnetic methods have the potential to recover rock property distributions from the surface to great depths. Unfortunately, results in complex 3D geo-electrical settings can be disappointing, especially where significant near-surface conductivity variations exist. In such settings, unconstrained inversion of magnetotelluric data is inexorably non-unique. We believe that: (1) correctly introduced information from seismic reflection can substantially improve MT inversion, (2) a cooperative inversion approach can be automated, and (3) massively parallel computing can make such a process viable. Nine inversion strategies including baseline unconstrained inversion and new automated/semiautomated cooperative inversion approaches are applied to industry-scale co-located 3D seismic and magnetotelluric data sets. These data sets were acquired in one of the Carlin gold deposit districts in north-central Nevada, USA. In our approach, seismic information feeds directly into the creation of sets of prior conductivity model and covariance coefficient distributions. We demonstrate how statistical analysis of the distribution of selected seismic attributes can be used to automatically extract subvolumes that form the framework for prior model 3D conductivity distribution. Our cooperative inversion strategies result in detailed subsurface conductivity distributions that are consistent with seismic, electrical logs and geochemical analysis of cores. Such 3D conductivity distributions would be expected to provide clues to 3D velocity structures that could feed back into full seismic inversion for an iterative practical and truly cooperative inversion process. We anticipate that, with the aid of parallel computing, cooperative inversion of seismic and magnetotelluric data can be fully automated, and we hold confidence that significant and practical advances in this direction have been accomplished.

  12. Geothermal exploration using the magnetotelluric method

    NARCIS (Netherlands)

    van Leeuwen, W.A.

    2016-01-01

    One of the requirements to realize electricity production from geothermal energy in the Netherlands is the exploration of the deep subsurface. Currently, detailed geological information below 5 kilometer is sparse. The magnetotelluric (MT) method, a passive electromagnetic method, is a candidate to

  13. Smartphone audio port data collection cookbook

    Directory of Open Access Journals (Sweden)

    Kyle Forinash

    2018-06-01

    Full Text Available The audio port of a smartphone is designed to send and receive audio but can be harnessed for portable, economical, and accurate data collection from a variety of sources. While smartphones have internal sensors to measure a number of physical phenomena such as acceleration, magnetism and illumination levels, measurement of other phenomena such as voltage, external temperature, or accurate timing of moving objects are excluded. The audio port cannot be only employed to sense external phenomena. It has the additional advantage of timing precision; because audio is recorded or played at a controlled rate separated from other smartphone activities, timings based on audio can be highly accurate. The following outlines unpublished details of the audio port technical elements for data collection, a general data collection recipe and an example timing application for Android devices.

  14. A Joint Audio-Visual Approach to Audio Localization

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Christensen, Mads Græsbøll

    2015-01-01

    Localization of audio sources is an important research problem, e.g., to facilitate noise reduction. In the recent years, the problem has been tackled using distributed microphone arrays (DMA). A common approach is to apply direction-of-arrival (DOA) estimation on each array (denoted as nodes), a...... time-of-flight cameras. Moreover, we propose an optimal method for weighting such DOA and range information for audio localization. Our experiments on both synthetic and real data show that there is a clear, potential advantage of using the joint audiovisual localization framework....

  15. Audio Conferencing Enhancements

    OpenAIRE

    VESTERINEN, LEENA

    2006-01-01

    Audio conferencing allows multiple people in distant locations to interact in a single voice call. Whilst it can be very useful service it also has several key disadvantages. This thesis study investigated the options for improving the user experience of the mobile teleconferencing applications. In particular, the use of 3D, spatial audio and visualinteractive functionality was investigated as the means of improving the intelligibility and audio perception during the audio...

  16. Back to basics audio

    CERN Document Server

    Nathan, Julian

    1998-01-01

    Back to Basics Audio is a thorough, yet approachable handbook on audio electronics theory and equipment. The first part of the book discusses electrical and audio principles. Those principles form a basis for understanding the operation of equipment and systems, covered in the second section. Finally, the author addresses planning and installation of a home audio system.Julian Nathan joined the audio service and manufacturing industry in 1954 and moved into motion picture engineering and production in 1960. He installed and operated recording theaters in Sydney, Austra

  17. Hydrocarbon Reservoir Identification in Volcanic Zone by using Magnetotelluric and Geochemistry Information

    Science.gov (United States)

    Firda, S. I.; Permadi, A. N.; Supriyanto; Suwardi, B. N.

    2018-03-01

    The resistivity of Magnetotelluric (MT) data show the resistivity mapping in the volcanic reservoir zone and the geochemistry information for confirm the reservoir and source rock formation. In this research, we used 132 data points divided with two line at exploration area. We used several steps to make the resistivity mapping. There are time series correction, crosspower correction, then inversion of Magnetotelluric (MT) data. Line-2 and line-3 show anomaly geological condition with Gabon fault. The geology structure from the resistivity mapping show the fault and the geological formation with the geological rock data mapping distribution. The geochemistry information show the maturity of source rock formation. According to core sample analysis information, we get the visual porosity for reservoir rock formation in several geological structure. Based on that, we make the geological modelling where the potential reservoir and the source rock around our interest area.

  18. Debugging of Class-D Audio Power Amplifiers

    DEFF Research Database (Denmark)

    Crone, Lasse; Pedersen, Jeppe Arnsdorf; Mønster, Jakob Døllner

    2012-01-01

    Determining and optimizing the performance of a Class-D audio power amplier can be very dicult without knowledge of the use of audio performance measuring equipment and of how the various noise and distortion sources in uence the audio performance. This paper gives an introduction on how to measure...

  19. Categorizing Video Game Audio

    DEFF Research Database (Denmark)

    Westerberg, Andreas Rytter; Schoenau-Fog, Henrik

    2015-01-01

    they can use audio in video games. The conclusion of this study is that the current models' view of the diegetic spaces, used to categorize video game audio, is not t to categorize all sounds. This can however possibly be changed though a rethinking of how the player interprets audio.......This paper dives into the subject of video game audio and how it can be categorized in order to deliver a message to a player in the most precise way. A new categorization, with a new take on the diegetic spaces, can be used a tool of inspiration for sound- and game-designers to rethink how...

  20. Digital Augmented Reality Audio Headset

    Directory of Open Access Journals (Sweden)

    Jussi Rämö

    2012-01-01

    Full Text Available Augmented reality audio (ARA combines virtual sound sources with the real sonic environment of the user. An ARA system can be realized with a headset containing binaural microphones. Ideally, the ARA headset should be acoustically transparent, that is, it should not cause audible modification to the surrounding sound. A practical implementation of an ARA mixer requires a low-latency headphone reproduction system with additional equalization to compensate for the attenuation and the modified ear canal resonances caused by the headphones. This paper proposes digital IIR filters to realize the required equalization and evaluates a real-time prototype ARA system. Measurements show that the throughput latency of the digital prototype ARA system can be less than 1.4 ms, which is sufficiently small in practice. When the direct and processed sounds are combined in the ear, a comb filtering effect is brought about and appears as notches in the frequency response. The comb filter effect in speech and music signals was studied in a listening test and it was found to be inaudible when the attenuation is 20 dB. Insert ARA headphones have a sufficient attenuation at frequencies above about 1 kHz. The proposed digital ARA system enables several immersive audio applications, such as a virtual audio tourist guide and audio teleconferencing.

  1. Roundtable Audio Discussion

    Directory of Open Access Journals (Sweden)

    Chris Bigum

    2007-01-01

    Full Text Available RoundTable on Technology, Teaching and Tools. This is a roundtable audio interview conducted by James Farmer, founder of Edublogs, with Anne Bartlett-Bragg (University of Technology Sydney and Chris Bigum (Deakin University. Skype was used to make and record the audio conference and the resulting sound file was edited by Andrew McLauchlan.

  2. Structure Learning in Audio

    DEFF Research Database (Denmark)

    Nielsen, Andreas Brinch

    By having information about the setting a user is in, a computer is able to make decisions proactively to facilitate tasks for the user. Two approaches are taken in this thesis to achieve more information about an audio environment. One approach is that of classifying audio, and a new approach...... investigated. A fast and computationally simple approach that compares recordings and classifies if they are from the same audio environment have been developed, and shows very high accuracy and the ability to synchronize recordings in the case of recording devices which are not connected. A more general model...

  3. Near-field Localization of Audio

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Christensen, Mads Græsbøll

    2014-01-01

    Localization of audio sources using microphone arrays has been an important research problem for more than two decades. Many traditional methods for solving the problem are based on a two-stage procedure: first, information about the audio source, such as time differences-of-arrival (TDOAs......) and gain ratios-of-arrival (GROAs) between microphones is estimated, and, second, this knowledge is used to localize the audio source. These methods often have a low computational complexity, but this comes at the cost of a limited estimation accuracy. Therefore, we propose a new localization approach......, where the desired signal is modeled using TDOAs and GROAs, which are determined by the source location. This facilitates the derivation of one-stage, maximum likelihood methods under a white Gaussian noise assumption that is applicable in both near- and far-field scenarios. Simulations show...

  4. spatial variation of magnetotelluric field components in simple 2d ...

    African Journals Online (AJOL)

    DEVEERERRY

    resistivities which are useful in the interpretation of magnetotelluric field measurements for investigating geologic ... equation technique required about 20 minutes – CPU time ... Maxwell's equations govern large scale EM phenomena.

  5. Perceptual Audio Hashing Functions

    Directory of Open Access Journals (Sweden)

    Emin Anarım

    2005-07-01

    Full Text Available Perceptual hash functions provide a tool for fast and reliable identification of content. We present new audio hash functions based on summarization of the time-frequency spectral characteristics of an audio document. The proposed hash functions are based on the periodicity series of the fundamental frequency and on singular-value description of the cepstral frequencies. They are found, on one hand, to perform very satisfactorily in identification and verification tests, and on the other hand, to be very resilient to a large variety of attacks. Moreover, we address the issue of security of hashes and propose a keying technique, and thereby a key-dependent hash function.

  6. DAFX Digital Audio Effects

    CERN Document Server

    2011-01-01

    The rapid development in various fields of Digital Audio Effects, or DAFX, has led to new algorithms and this second edition of the popular book, DAFX: Digital Audio Effects has been updated throughout to reflect progress in the field. It maintains a unique approach to DAFX with a lecture-style introduction into the basics of effect processing. Each effect description begins with the presentation of the physical and acoustical phenomena, an explanation of the signal processing techniques to achieve the effect, followed by a discussion of musical applications and the control of effect parameter

  7. Magnetotelluric data, Taos Plateau Volcanic Field, New Mexico

    Science.gov (United States)

    Ailes, Chad E.; Rodriguez, Brian D.

    2010-01-01

    The population of the San Luis Basin region of northern New Mexico is growing. Water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's groundwater resources. An important issue in managing the groundwater resources is a better understanding of the hydrogeology of the Santa Fe Group and the nature of the sedimentary deposits that fill the Rio Grande rift, which contain the principal groundwater aquifers. The shallow unconfined aquifer and the deeper confined Santa Fe Group aquifer in the San Luis Basin are the main sources of municipal water for the region. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the San Luis Basin. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, an electromagnetic survey called magnetotellurics (MT), and hydrologic and lithologic data are being used to better understand the aquifers. This report describes a regional east-west MT sounding profile acquired in late July 2009 across the Taos Plateau Volcanic Field where drillhole data are sparse. Resistivity modeling of the MT data can be used to help map changes in electrical resistivity with depths that are related to differences in rock types. These various rock types help control the properties of aquifers. The purpose of this report is to release the MT sounding data collected along the east-west profile. No interpretation of the data is included.

  8. Portable Audio Design

    DEFF Research Database (Denmark)

    Groth, Sanne Krogh

    2014-01-01

    attention to the specific genre; a grasping of the complex relationship between site and time, the actual and the virtual; and getting aquatint with the specific site’s soundscape by approaching it both intuitively and systematically. These steps will finally lead to an audio production that not only...

  9. Audio Feedback -- Better Feedback?

    Science.gov (United States)

    Voelkel, Susanne; Mello, Luciane V.

    2014-01-01

    National Student Survey (NSS) results show that many students are dissatisfied with the amount and quality of feedback they get for their work. This study reports on two case studies in which we tried to address these issues by introducing audio feedback to one undergraduate (UG) and one postgraduate (PG) class, respectively. In case study one…

  10. Improving audio chord transcription by exploiting harmonic and metric knowledge

    NARCIS (Netherlands)

    de Haas, W.B.; Rodrigues Magalhães, J.P.; Wiering, F.

    2012-01-01

    We present a new system for chord transcription from polyphonic musical audio that uses domain-specific knowledge about tonal harmony and metrical position to improve chord transcription performance. Low-level pulse and spectral features are extracted from an audio source using the Vamp plugin

  11. Magnetotellurics with long distance remote reference to reject DC railway noise

    Science.gov (United States)

    Hanstein, T.; Jiang, J.; Strack, K.; Ritter, O.

    2014-12-01

    Some parts of railway network in Europe is electrified by DC current. The return current in the ground is varying in space, time and power when the train is moving. Since the train traffic is active 24 hours, there is no quite time. The train signal is dominating for periods longer than 1 s and is a near field source. The transfer function of the magnetotelluric sounding (MT) is influenced by this near field source, the phase is going to zero and amplitude increase with slope 1 for longer periods. Since this dominating noise is present all day robust magnetotelluric processing technique to identify and remove outliers are not applicable and sufficient. The remote reference technique has successfully been applied for magnetotelluric soundings Combining an disturbed local MT data set with the data of the remote station, which is recording simultaneously the horizontal magnetic fields, can improve the data quality. Finding a good remote station during field survey is difficult and expensive. There is a permanent MT remote reference station in Germany. The set up and maintance is done by the GFZ - Helmholtz Centre Potsdam - GFZ German Research Centre for Geosciences. The location is near Wittstock and has good signal-to-noise-ratio with low cutural noise, the ground is almost lD and recording since May 2010. The electric and magnetic field is continously recorded with 250 Hz sampling and induction coils. The magnetic field is also recorded with fluxgate magnetometers and 5 Hz sampling. The distance to the local MT site is about 600 km.

  12. The audio expert everything you need to know about audio

    CERN Document Server

    Winer, Ethan

    2012-01-01

    The Audio Expert is a comprehensive reference that covers all aspects of audio, with many practical, as well as theoretical, explanations. Providing in-depth descriptions of how audio really works, using common sense plain-English explanations and mechanical analogies with minimal math, the book is written for people who want to understand audio at the deepest, most technical level, without needing an engineering degree. It's presented in an easy-to-read, conversational tone, and includes more than 400 figures and photos augmenting the text.The Audio Expert takes th

  13. Subjective and Objective Assessment of Perceived Audio Quality of Current Digital Audio Broadcasting Systems and Web-Casting Applications

    NARCIS (Netherlands)

    Pocta, P.; Beerends, J.G.

    2015-01-01

    This paper investigates the impact of different audio codecs typically deployed in current digital audio broadcasting (DAB) systems and web-casting applications, which represent a main source of quality impairment in these systems and applications, on the quality perceived by the end user. Both

  14. Audio Networking in the Music Industry

    Directory of Open Access Journals (Sweden)

    Glebs Kuzmics

    2018-01-01

    Full Text Available This paper surveys the rôle of computer networking technologies in the music industry. A comparison of their relevant technologies, their defining advantages and disadvantages; analyses and discussion of the situation in the market of network enabled audio products followed by a discussion of different devices are presented. The idea of replacing a proprietary solution with open-source and freeware software programs has been chosen as the fundamental concept of this research. The technologies covered include: native IEEE AVnu Alliance Audio Video Bridging (AVB, CobraNet®, Audinate Dante™ and Harman BLU Link.

  15. Wavelet-based audio embedding and audio/video compression

    Science.gov (United States)

    Mendenhall, Michael J.; Claypoole, Roger L., Jr.

    2001-12-01

    Watermarking, traditionally used for copyright protection, is used in a new and exciting way. An efficient wavelet-based watermarking technique embeds audio information into a video signal. Several effective compression techniques are applied to compress the resulting audio/video signal in an embedded fashion. This wavelet-based compression algorithm incorporates bit-plane coding, index coding, and Huffman coding. To demonstrate the potential of this audio embedding and audio/video compression algorithm, we embed an audio signal into a video signal and then compress. Results show that overall compression rates of 15:1 can be achieved. The video signal is reconstructed with a median PSNR of nearly 33 dB. Finally, the audio signal is extracted from the compressed audio/video signal without error.

  16. MTpy - Python Tools for Magnetotelluric Data Processing and Analysis

    Science.gov (United States)

    Krieger, Lars; Peacock, Jared; Thiel, Stephan; Inverarity, Kent; Kirkby, Alison; Robertson, Kate; Soeffky, Paul; Didana, Yohannes

    2014-05-01

    We present the Python package MTpy, which provides functions for the processing, analysis, and handling of magnetotelluric (MT) data sets. MT is a relatively immature and not widely applied geophysical method in comparison to other geophysical techniques such as seismology. As a result, the data processing within the academic MT community is not thoroughly standardised and is often based on a loose collection of software, adapted to the respective local specifications. We have developed MTpy to overcome problems that arise from missing standards, and to provide a simplification of the general handling of MT data. MTpy is written in Python, and the open-source code is freely available from a GitHub repository. The setup follows the modular approach of successful geoscience software packages such as GMT or Obspy. It contains sub-packages and modules for the various tasks within the standard work-flow of MT data processing and interpretation. In order to allow the inclusion of already existing and well established software, MTpy does not only provide pure Python classes and functions, but also wrapping command-line scripts to run standalone tools, e.g. modelling and inversion codes. Our aim is to provide a flexible framework, which is open for future dynamic extensions. MTpy has the potential to promote the standardisation of processing procedures and at same time be a versatile supplement for existing algorithms. Here, we introduce the concept and structure of MTpy, and we illustrate the workflow of MT data processing, interpretation, and visualisation utilising MTpy on example data sets collected over different regions of Australia and the USA.

  17. Magnetotelluric studies at the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Goubau, W.M. (Lawrence Berkeley Lab., CA); Goldstein, N.E.; Clarke, J.

    1981-01-01

    During three years of magnetotelluric surveying, data were acquired at 26 sites distributed over 190 km/sup 2/ around the production area. A relatively well-defined strike of N27W +- 1.5/sup 0/ (magnetic) was established. The simple model shown suggests a lateral discontinuity in the vicinity of Nueva Leon.

  18. Small signal audio design

    CERN Document Server

    Self, Douglas

    2014-01-01

    Learn to use inexpensive and readily available parts to obtain state-of-the-art performance in all the vital parameters of noise, distortion, crosstalk and so on. With ample coverage of preamplifiers and mixers and a new chapter on headphone amplifiers, this practical handbook provides an extensive repertoire of circuits that can be put together to make almost any type of audio system.A resource packed full of valuable information, with virtually every page revealing nuggets of specialized knowledge not found elsewhere. Essential points of theory that bear on practical performance are lucidly

  19. High-Order Sparse Linear Predictors for Audio Processing

    DEFF Research Database (Denmark)

    Giacobello, Daniele; van Waterschoot, Toon; Christensen, Mads Græsbøll

    2010-01-01

    Linear prediction has generally failed to make a breakthrough in audio processing, as it has done in speech processing. This is mostly due to its poor modeling performance, since an audio signal is usually an ensemble of different sources. Nevertheless, linear prediction comes with a whole set...... of interesting features that make the idea of using it in audio processing not far fetched, e.g., the strong ability of modeling the spectral peaks that play a dominant role in perception. In this paper, we provide some preliminary conjectures and experiments on the use of high-order sparse linear predictors...... in audio processing. These predictors, successfully implemented in modeling the short-term and long-term redundancies present in speech signals, will be used to model tonal audio signals, both monophonic and polyphonic. We will show how the sparse predictors are able to model efficiently the different...

  20. All About Audio Equalization: Solutions and Frontiers

    Directory of Open Access Journals (Sweden)

    Vesa Välimäki

    2016-05-01

    Full Text Available Audio equalization is a vast and active research area. The extent of research means that one often cannot identify the preferred technique for a particular problem. This review paper bridges those gaps, systemically providing a deep understanding of the problems and approaches in audio equalization, their relative merits and applications. Digital signal processing techniques for modifying the spectral balance in audio signals and applications of these techniques are reviewed, ranging from classic equalizers to emerging designs based on new advances in signal processing and machine learning. Emphasis is placed on putting the range of approaches within a common mathematical and conceptual framework. The application areas discussed herein are diverse, and include well-defined, solvable problems of filter design subject to constraints, as well as newly emerging challenges that touch on problems in semantics, perception and human computer interaction. Case studies are given in order to illustrate key concepts and how they are applied in practice. We also recommend preferred signal processing approaches for important audio equalization problems. Finally, we discuss current challenges and the uncharted frontiers in this field. The source code for methods discussed in this paper is made available at https://code.soundsoftware.ac.uk/projects/allaboutaudioeq.

  1. Near-source noise suppression of AMT by compressive sensing and mathematical morphology filtering

    Science.gov (United States)

    Li, Guang; Xiao, Xiao; Tang, Jing-Tian; Li, Jin; Zhu, Hui-Jie; Zhou, Cong; Yan, Fa-Bao

    2017-12-01

    In deep mineral exploration, the acquisition of audio magnetotelluric (AMT) data is severely affected by ambient noise near the observation sites; This near-field noise restricts investigation depths. Mathematical morphological filtering (MMF) proved effective in suppressing large-scale strong and variably shaped noise, typically low-frequency noise, but can not deal with pulse noise of AMT data. We combine compressive sensing and MMF. First, we use MMF to suppress the large-scale strong ambient noise; second, we use the improved orthogonal match pursuit (IOMP) algorithm to remove the residual pulse noise. To remove the noise and protect the useful AMT signal, a redundant dictionary that matches with spikes and is insensitive to the useful signal is designed. Synthetic and field data from the Luzong field suggest that the proposed method suppresses the near-source noise and preserves the signal well; thus, better results are obtained that improve the output of either MMF or IOMP.

  2. Audio Networking in the Music Industry

    OpenAIRE

    Glebs Kuzmics; Maaruf Ali

    2018-01-01

    This paper surveys the rôle of computer networking technologies in the music industry. A comparison of their relevant technologies, their defining advantages and disadvantages; analyses and discussion of the situation in the market of network enabled audio products followed by a discussion of different devices are presented. The idea of replacing a proprietary solution with open-source and freeware software programs has been chosen as the fundamental concept of this research. The technologies...

  3. Efficient Audio Power Amplification - Challenges

    DEFF Research Database (Denmark)

    Andersen, Michael Andreas E.

    2005-01-01

    For more than a decade efficient audio power amplification has evolved and today switch-mode audio power amplification in various forms are the state-of-the-art. The technical steps that lead to this evolution are described and in addition many of the challenges still to be faced and where...

  4. Efficient audio power amplification - challenges

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, Michael A.E.

    2005-07-01

    For more than a decade efficient audio power amplification has evolved and today switch-mode audio power amplification in various forms are the state-of-the-art. The technical steps that lead to this evolution are described and in addition many of the challenges still to be faced and where extensive research and development are needed is covered. (au)

  5. The Finite Element Numerical Modelling of 3D Magnetotelluric

    Directory of Open Access Journals (Sweden)

    Ligang Cao

    2014-01-01

    Full Text Available The ideal numerical simulation of 3D magnetotelluric was restricted by the methodology complexity and the time-consuming calculation. Boundary values, the variation of weighted residual equation, and the hexahedral mesh generation method of finite element are three major causes. A finite element method for 3D magnetotelluric numerical modeling is presented in this paper as a solution for the problem mentioned above. In this algorithm, a hexahedral element coefficient matrix for magnetoelluric finite method is developed, which solves large-scale equations using preconditioned conjugate gradient of the first-type boundary conditions. This algorithm is verified using the homogeneous model, and the positive landform model, as well as the low resistance anomaly model.

  6. Stochastic interpretation of magnetotelluric data, comparison of methods

    Czech Academy of Sciences Publication Activity Database

    Červ, Václav; Menvielle, M.; Pek, Josef

    2007-01-01

    Roč. 50, č. 1 (2007), s. 7-19 ISSN 1593-5213 R&D Projects: GA ČR GA205/04/0740; GA ČR GA205/04/0746; GA MŠk ME 677 Institutional research plan: CEZ:AV0Z30120515 Keywords : magnetotelluric method * inverse problem * controlled random search Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.298, year: 2007

  7. Portable audio electronics for impedance-based measurements in microfluidics

    International Nuclear Information System (INIS)

    Wood, Paul; Sinton, David

    2010-01-01

    We demonstrate the use of audio electronics-based signals to perform on-chip electrochemical measurements. Cell phones and portable music players are examples of consumer electronics that are easily operated and are ubiquitous worldwide. Audio output (play) and input (record) signals are voltage based and contain frequency and amplitude information. A cell phone, laptop soundcard and two compact audio players are compared with respect to frequency response; the laptop soundcard provides the most uniform frequency response, while the cell phone performance is found to be insufficient. The audio signals in the common portable music players and laptop soundcard operate in the range of 20 Hz to 20 kHz and are found to be applicable, as voltage input and output signals, to impedance-based electrochemical measurements in microfluidic systems. Validated impedance-based measurements of concentration (0.1–50 mM), flow rate (2–120 µL min −1 ) and particle detection (32 µm diameter) are demonstrated. The prevailing, lossless, wave audio file format is found to be suitable for data transmission to and from external sources, such as a centralized lab, and the cost of all hardware (in addition to audio devices) is ∼10 USD. The utility demonstrated here, in combination with the ubiquitous nature of portable audio electronics, presents new opportunities for impedance-based measurements in portable microfluidic systems. (technical note)

  8. Magnetotelluric Investigation of the South Aegean Volcanic Arc, Greece

    Science.gov (United States)

    Kalisperi, Despina; Romano, Gerardo; Smirnov, Maxim; Kouli, Maria; Perrone, Angela; Makris, John P.; Vallianatos, Filippos

    2014-05-01

    The South Aegean Volcanic Arc (SAVA) is a chain of volcanic islands in the South Aegean resulting from the subduction of the African tectonic plate beneath the Eurasian plate. It extends from Methana, northwest, to the Island of Nisyros southeast (450 km total length). SAVA comprises a series of dormant and historically active volcanoes, with the most prominent to be Aegina, Methana, Milos, Santorini, Kolumbo, Kos and Nisyros. The aim of the ongoing research project "MagnetoTellurics in studying Geodynamics of the hEllenic ARc (MT-GEAR)" is to contribute to the investigation of the geoelectric structure of Southern Aegean, and particularly to attempt to image the Hellenic Subduction Zone. In this context, onshore magnetotelluric (MT) measurements were recently carried out on the central and eastern part of SAVA (Milos, Santorini, Nisyros and Kos Islands). Data were collected using two MT systems running simultaneously plus a remote reference station installed in Omalos plateau (Western Crete). Robust MT data analysis of the broad-band MT soundings and the resulting model of the conductivity structure of the South Aegean Volcanic Arc is presented. The research is co-funded by the European Social Fund (ESF) and National Resources under the Operational Programme 'Education and Lifelong Learning (EdLL) within the context of the Action 'Supporting Postdoctoral Researchers' in the framework of the project title "MagnetoTellurics in studying Geodynamics of the hEllenic ARc (MT-GEAR)".

  9. Electrical structure beneath the Hangai Dome, Mongolia, from magnetotelluric data

    Science.gov (United States)

    Comeau, Matthew; Käufl, Johannes; Becken, Michael; Kuvshinov, Alexey; Demberel, Sodnomsambuu; Sukhbaatar, Usnikh; Batmagnai, Erdenechimeg; Tserendug, Shoovdor; Nasan, Ochir

    2017-04-01

    The Hangai Dome in west-central Mongolia is an unusual high-elevation intra-continental plateau located far from tectonic plate boundaries and characterized by dispersed, low-volume, basaltic volcanism. This region is an ideal natural laboratory for studying intra-continental orogenic and magmatic processes resulting from crust-mantle interactions. The processes responsible for developing the Hangai Dome remain unexplained, due in part to a lack of high resolution geophysical data over the area. Here we present newly acquired broadband (0.008 - 3,000 s) magnetotelluric (MT) data from a large-scale ( 200 x 450 km) and high resolution (site spacing > 5 km) survey across the Hangai Dome. A total of 125 sites were collected and include full MT sites and telluric-only sites where inter-station transfer functions were computed. The MT data are used to generate an electrical resistivity model of the crust and upper mantle below the Hangai Dome. The model shows that the lower crust ( 30 - 50 km; below the brittle-ductile transition zone) beneath the Hangai Dome contains anomalous discrete pockets of low-resistivity ( 30 ohm-m) material that indicate the presence of local accumulations of fluids and/or low-percent partial melts. These anomalous regions appear to be spatially associated with the surface expressions of past volcanism, hydrothermal activity, and an increase in heat flow. They also correlate with observed crustal low-density and low-velocity anomalies. However they are in contrast to some geochemical and petrological studies which show long-lived crustal melt storage is impossible below the Hangai due to limited crustal assimilation and crustal contamination, arguing for a single parent-source at mantle depths. The upper mantle ( 6%) at this location. The results are consistent with modern geochemical and geophysical data, which show a thin lithosphere below the Hangai region. Furthermore the results agree with geodynamic models that require a low-heat flux

  10. A centralized audio presentation manager

    Energy Technology Data Exchange (ETDEWEB)

    Papp, A.L. III; Blattner, M.M.

    1994-05-16

    The centralized audio presentation manager addresses the problems which occur when multiple programs running simultaneously attempt to use the audio output of a computer system. Time dependence of sound means that certain auditory messages must be scheduled simultaneously, which can lead to perceptual problems due to psychoacoustic phenomena. Furthermore, the combination of speech and nonspeech audio is examined; each presents its own problems of perceptibility in an acoustic environment composed of multiple auditory streams. The centralized audio presentation manager receives abstract parameterized message requests from the currently running programs, and attempts to create and present a sonic representation in the most perceptible manner through the use of a theoretically and empirically designed rule set.

  11. Instrumental Landing Using Audio Indication

    Science.gov (United States)

    Burlak, E. A.; Nabatchikov, A. M.; Korsun, O. N.

    2018-02-01

    The paper proposes an audio indication method for presenting to a pilot the information regarding the relative positions of an aircraft in the tasks of precision piloting. The implementation of the method is presented, the use of such parameters of audio signal as loudness, frequency and modulation are discussed. To confirm the operability of the audio indication channel the experiments using modern aircraft simulation facility were carried out. The simulated performed the instrument landing using the proposed audio method to indicate the aircraft deviations in relation to the slide path. The results proved compatible with the simulated instrumental landings using the traditional glidescope pointers. It inspires to develop the method in order to solve other precision piloting tasks.

  12. ENERGY STAR Certified Audio Video

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 3.0 ENERGY STAR Program Requirements for Audio Video Equipment that are effective as of...

  13. WLAN Technologies for Audio Delivery

    Directory of Open Access Journals (Sweden)

    Nicolas-Alexander Tatlas

    2007-01-01

    Full Text Available Audio delivery and reproduction for home or professional applications may greatly benefit from the adoption of digital wireless local area network (WLAN technologies. The most challenging aspect of such integration relates the synchronized and robust real-time streaming of multiple audio channels to multipoint receivers, for example, wireless active speakers. Here, it is shown that current WLAN solutions are susceptible to transmission errors. A detailed study of the IEEE802.11e protocol (currently under ratification is also presented and all relevant distortions are assessed via an analytical and experimental methodology. A novel synchronization scheme is also introduced, allowing optimized playback for multiple receivers. The perceptual audio performance is assessed for both stereo and 5-channel applications based on either PCM or compressed audio signals.

  14. Realtime Audio with Garbage Collection

    OpenAIRE

    Matheussen, Kjetil Svalastog

    2010-01-01

    Two non-moving concurrent garbage collectors tailored for realtime audio processing are described. Both collectors work on copies of the heap to avoid cache misses and audio-disruptive synchronizations. Both collectors are targeted at multiprocessor personal computers. The first garbage collector works in uncooperative environments, and can replace Hans Boehm's conservative garbage collector for C and C++. The collector does not access the virtual memory system. Neither doe...

  15. Audio localization for mobile robots

    OpenAIRE

    de Guillebon, Thibaut; Grau Saldes, Antoni; Bolea Monte, Yolanda

    2009-01-01

    The department of the University for which I worked is developing a project based on the interaction with robots in the environment. My work was to define an audio system for the robot. This audio system that I have to realize consists on a mobile head which is able to follow the sound in its environment. This subject was treated as a research problem, with the liberty to find and develop different solutions and make them evolve in the chosen way.

  16. Tourism research and audio methods

    DEFF Research Database (Denmark)

    Jensen, Martin Trandberg

    2016-01-01

    Audio methods enriches sensuous tourism ethnographies. • The note suggests five research avenues for future auditory scholarship. • Sensuous tourism research has neglected the role of sounds in embodied tourism experiences.......• Audio methods enriches sensuous tourism ethnographies. • The note suggests five research avenues for future auditory scholarship. • Sensuous tourism research has neglected the role of sounds in embodied tourism experiences....

  17. Modeling Audio Fingerprints : Structure, Distortion, Capacity

    NARCIS (Netherlands)

    Doets, P.J.O.

    2010-01-01

    An audio fingerprint is a compact low-level representation of a multimedia signal. An audio fingerprint can be used to identify audio files or fragments in a reliable way. The use of audio fingerprints for identification consists of two phases. In the enrollment phase known content is fingerprinted,

  18. Introduction to audio analysis a MATLAB approach

    CERN Document Server

    Giannakopoulos, Theodoros

    2014-01-01

    Introduction to Audio Analysis serves as a standalone introduction to audio analysis, providing theoretical background to many state-of-the-art techniques. It covers the essential theory necessary to develop audio engineering applications, but also uses programming techniques, notably MATLAB®, to take a more applied approach to the topic. Basic theory and reproducible experiments are combined to demonstrate theoretical concepts from a practical point of view and provide a solid foundation in the field of audio analysis. Audio feature extraction, audio classification, audio segmentation, au

  19. WebGL and web audio software lightweight components for multimedia education

    Science.gov (United States)

    Chang, Xin; Yuksel, Kivanc; Skarbek, Władysław

    2017-08-01

    The paper presents the results of our recent work on development of contemporary computing platform DC2 for multimedia education usingWebGL andWeb Audio { the W3C standards. Using literate programming paradigm the WEBSA educational tools were developed. It offers for a user (student), the access to expandable collection of WEBGL Shaders and web Audio scripts. The unique feature of DC2 is the option of literate programming, offered for both, the author and the reader in order to improve interactivity to lightweightWebGL andWeb Audio components. For instance users can define: source audio nodes including synthetic sources, destination audio nodes, and nodes for audio processing such as: sound wave shaping, spectral band filtering, convolution based modification, etc. In case of WebGL beside of classic graphics effects based on mesh and fractal definitions, the novel image processing analysis by shaders is offered like nonlinear filtering, histogram of gradients, and Bayesian classifiers.

  20. Automated processing of massive audio/video content using FFmpeg

    Directory of Open Access Journals (Sweden)

    Kia Siang Hock

    2014-01-01

    Full Text Available Audio and video content forms an integral, important and expanding part of the digital collections in libraries and archives world-wide. While these memory institutions are familiar and well-versed in the management of more conventional materials such as books, periodicals, ephemera and images, the handling of audio (e.g., oral history recordings and video content (e.g., audio-visual recordings, broadcast content requires additional toolkits. In particular, a robust and comprehensive tool that provides a programmable interface is indispensable when dealing with tens of thousands of hours of audio and video content. FFmpeg is comprehensive and well-established open source software that is capable of the full-range of audio/video processing tasks (such as encode, decode, transcode, mux, demux, stream and filter. It is also capable of handling a wide-range of audio and video formats, a unique challenge in memory institutions. It comes with a command line interface, as well as a set of developer libraries that can be incorporated into applications.

  1. Location audio simplified capturing your audio and your audience

    CERN Document Server

    Miles, Dean

    2014-01-01

    From the basics of using camera, handheld, lavalier, and shotgun microphones to camera calibration and mixer set-ups, Location Audio Simplified unlocks the secrets to clean and clear broadcast quality audio no matter what challenges you face. Author Dean Miles applies his twenty-plus years of experience as a professional location operator to teach the skills, techniques, tips, and secrets needed to produce high-quality production sound on location. Humorous and thoroughly practical, the book covers a wide array of topics, such as:* location selection* field mixing* boo

  2. Predistortion of a Bidirectional Cuk Audio Amplifier

    DEFF Research Database (Denmark)

    Birch, Thomas Hagen; Nielsen, Dennis; Knott, Arnold

    2014-01-01

    Some non-linear amplifier topologies are capable of providing a larger voltage gain than one from a DC source, which could make them suitable for various applications. However, the non-linearities introduce a significant amount of harmonic distortion (THD). Some of this distortion could be reduced...... using predistortion. This paper suggests linearizing a nonlinear bidirectional Cuk audio amplifier using an analog predistortion approach. A prototype power stage was built and results show that a voltage gain of up to 9 dB and reduction in THD from 6% down to 3% was obtainable using this approach....

  3. Calibration of an audio frequency noise generator

    DEFF Research Database (Denmark)

    Diamond, Joseph M.

    1966-01-01

    a noise bandwidth Bn = π/2 × (3dB bandwidth). To apply this method to low audio frequencies, the noise bandwidth of the low Q parallel resonant circuit has been found, including the effects of both series and parallel damping. The method has been used to calibrate a General Radio 1390-B noise generator...... it is used for measurement purposes. The spectral density of a noise source may be found by measuring its rms output over a known noise bandwidth. Such a bandwidth may be provided by a passive filter using accurately known elements. For example, the parallel resonant circuit with purely parallel damping has...

  4. Audio power amplifier design handbook

    CERN Document Server

    Self, Douglas

    2013-01-01

    This book is essential for audio power amplifier designers and engineers for one simple reason...it enables you as a professional to develop reliable, high-performance circuits. The Author Douglas Self covers the major issues of distortion and linearity, power supplies, overload, DC-protection and reactive loading. He also tackles unusual forms of compensation and distortion produced by capacitors and fuses. This completely updated fifth edition includes four NEW chapters including one on The XD Principle, invented by the author, and used by Cambridge Audio. Cro

  5. Engaging Students with Audio Feedback

    Science.gov (United States)

    Cann, Alan

    2014-01-01

    Students express widespread dissatisfaction with academic feedback. Teaching staff perceive a frequent lack of student engagement with written feedback, much of which goes uncollected or unread. Published evidence shows that audio feedback is highly acceptable to students but is underused. This paper explores methods to produce and deliver audio…

  6. Haptic and Audio Interaction Design

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 5th International Workshop on Haptic and Audio Interaction Design, HAID 2010 held in Copenhagen, Denmark, in September 2010. The 21 revised full papers presented were carefully reviewed and selected for inclusion in the book. The papers are or...

  7. Radioactive Decay: Audio Data Collection

    Science.gov (United States)

    Struthers, Allan

    2009-01-01

    Many phenomena generate interesting audible time series. This data can be collected and processed using audio software. The free software package "Audacity" is used to demonstrate the process by recording, processing, and extracting click times from an inexpensive radiation detector. The high quality of the data is demonstrated with a simple…

  8. Towards a universal representation for audio information retrieval and analysis

    DEFF Research Database (Denmark)

    Jensen, Bjørn Sand; Troelsgaard, Rasmus; Larsen, Jan

    2013-01-01

    A fundamental and general representation of audio and music which integrates multi-modal data sources is important for both application and basic research purposes. In this paper we address this challenge by proposing a multi-modal version of the Latent Dirichlet Allocation model which provides a...

  9. Field Tests of the Magnetotelluric Method to Detect Gas Hydrates, Mallik, Mackenzie Delta, Canada

    Science.gov (United States)

    Craven, J. A.; Roberts, B.; Bellefleur, G.; Spratt, J.; Wright, F.; Dallimore, S. R.

    2008-12-01

    The magnetotelluric method is not generally utilized at extreme latitudes due primarily to difficulties in making the good electrical contact with the ground required to measure the electric field. As such, the magnetotelluric technique has not been previously investigated to direct detect gas hydrates in on-shore permafrost environments. We present the results of preliminary field tests at Mallik, Northwest Territories, Canada, that demonstrate good quality magnetotelluric data can be obtained in this environment using specialized electrodes and buffer amplifiers similar to those utilized by Wannamaker et al (2004). This result suggests that subsurface images from larger magnetotelluric surveys will be useful to complement other techniques to detect, quantify and characterize gas hydrates.

  10. Multistation magnetotellurics. Final report, 1 January 1996--30 June 1997

    Energy Technology Data Exchange (ETDEWEB)

    Egbert, G.D.

    1997-12-31

    The author has developed the foundations of a practical multivariate approach to processing magnetotelluric array data. Compared to current standards for magnetotelluric data processing, the multivariate approach is unique in that all available data channels are used simultaneously. The approach is outlined in this report. Using Multmtrn, a program for multiple station analysis of magnetotelluric data, the author achieved significant improvements in apparent resistivity and phase estimates in initial tests. Examples of the use of this approach are given including: Carrizo Plain and Parkfield electromagnetic profiling data; sea floor magnetotelluric (MT) data from the Gulf of Mexico; MT survey in a culturally noisy area of Bavaria; and Parkfield/Hollister earthquake monitoring array data. Experience with these projects has resulted in an improved program. The new version of the code is available at http://www.cg.NRCan.gc.ca/mtnet/mtnet.html or by contacting egbert{at}oce.orst.edu. Appendices of this report present documentation for Multmtrn.

  11. Audio Frequency Analysis in Mobile Phones

    Science.gov (United States)

    Aguilar, Horacio Munguía

    2016-01-01

    A new experiment using mobile phones is proposed in which its audio frequency response is analyzed using the audio port for inputting external signal and getting a measurable output. This experiment shows how the limited audio bandwidth used in mobile telephony is the main cause of the poor speech quality in this service. A brief discussion is…

  12. Design of a WAV audio player based on K20

    Directory of Open Access Journals (Sweden)

    Xu Yu

    2016-01-01

    Full Text Available The designed player uses the Freescale Company’s MK20DX128VLH7 as the core control ship, and its hardware platform is equipped with VS1003 audio decoder, OLED display interface, USB interface and SD card slot. The player uses the open source embedded real-time operating system μC/OS-II, Freescale USB Stack V4.1.1 and FATFS, and a graphical user interface is developed to improve the user experience based on CGUI. In general, the designed WAV audio player has a strong applicability and a good practical value.

  13. The Single- and Multichannel Audio Recordings Database (SMARD)

    DEFF Research Database (Denmark)

    Nielsen, Jesper Kjær; Jensen, Jesper Rindom; Jensen, Søren Holdt

    2014-01-01

    A new single- and multichannel audio recordings database (SMARD) is presented in this paper. The database contains recordings from a box-shaped listening room for various loudspeaker and array types. The recordings were made for 48 different configurations of three different loudspeakers and four...... different microphone arrays. In each configuration, 20 different audio segments were played and recorded ranging from simple artificial sounds to polyphonic music. SMARD can be used for testing algorithms developed for numerous application, and we give examples of source localisation results....

  14. Magnetotelluric investigation of the geothermal anomaly in Hailin, Mudanjiang, northeastern China

    Science.gov (United States)

    Zhang, Lili; Hao, Tianyao; Xiao, Qibin; Wang, Jie; Zhou, Liang; Qi, Min; Cui, Xiangpan; Cai, Ningxiao

    2015-07-01

    To study the occurrence conditions and locations of geothermal bodies in Hailin, Mudanjiang, northeastern China, we conducted a magnetotelluric investigation to delineate the electrical conductivity structure of the area on three parallel profiles. The area to the west of the Mudanjiang Fault lies in the Hailang sag of the Ning'an Basin. The data were processed using the mutual reference technique, static shift correction, and structural strike and dimensionality analysis based on tensor decomposition. Moreover, a modified anisotropic-diffusion-based method was used to suppress noise for the magnetotelluric time series data. This method retains the advantages of conventional anisotropic diffusion and is superior in its discrimination ability. The method is characteristic not only of the inherited features such as intra-region smoothing and edge preservation, but also of the adaptive selection of the diffusion coefficient. Data analysis revealed that the electrical resistivity structure can be approximated by a two-dimensional characterization. Two-dimensional inversion and rendering visualization show that a highly resistive granite basement is covered with conductive sedimentary layers and that a relatively low-resistivity anomalous structure with a resistivity of approximately 100-600 Ω·m is imbedded in the high-resistivity background. The anomalous structure has a narrow top and a wide bottom (the bottom depth is at least 3500 m). The shape and electrical features of the structure indicate favorable storage space for hot subsurface water. Fault activities and magma intrusion may result in the fractures of the basement, which are filled with hot water and thus produce the relatively low resistivity. Based on a comprehensive analysis, we infer that the structure is indicative of a geothermal reservoir. An exploratory well drilled near the structure confirms the occurrence of high temperatures. Several geological factors (cap rock, basement, and major faults

  15. Three-dimensional magnetotelluric axial anisotropic forward modeling and inversion

    Science.gov (United States)

    Cao, Hui; Wang, Kunpeng; Wang, Tao; Hua, Boguang

    2018-06-01

    Magnetotelluric (MT) data has been widely used to image underground electrical structural. However, when the significant axial resistivity anisotropy presents, how this influences three-dimensional MT data has not been resolved clearly yet. We here propose a scheme for three-dimensional modeling of MT data in presence of axial anisotropic resistivity, where the electromagnetic fields are decomposed into primary and secondary components. A 3D staggered-grid finite difference method is then used to resolve the resulting 3D governing equations. Numerical tests have completed to validate the correctness and accuracy of the present algorithm. A limited-memory Broyden-Fletcher-Goldfarb-Shanno method is then utilized to realize the 3D MT axial anisotropic inversion. The testing results show that, compared to the results of isotropic resistivity inversion, taking account the axial anisotropy can much improve the inverted results.

  16. Magnetotelluric inversion for depth-to-basement estimation

    DEFF Research Database (Denmark)

    Cai, Hongzhu; Zhdanov, Michael

    2015-01-01

    The magnetotelluric (MT) method can be effectively applied for depth-to-basement estimation, because there exists a strong contrast in resistivity between a conductive sedimentary basin and a resistive crystalline basement. Conventional inversions of MT data are usually aimed at determining...... the volumetric distribution of the conductivity within the inversion domain. By the nature of the MT method, the recovered distribution of the subsurface conductivity is typically diffusive, which makes it difficult to select the sediment-basement interface. This paper develops a novel approach to 3D MT...... inversion for the depth-to-basement estimate. The key to this approach is selection of the model parameterization with the depth to basement being the major unknown parameter. In order to estimate the depth to the basement, the inversion algorithm recovers both the thickness and the conductivities...

  17. Magnetotelluric inversion via reverse time migration algorithm of seismic data

    International Nuclear Information System (INIS)

    Ha, Taeyoung; Shin, Changsoo

    2007-01-01

    We propose a new algorithm for two-dimensional magnetotelluric (MT) inversion. Our algorithm is an MT inversion based on the steepest descent method, borrowed from the backpropagation technique of seismic inversion or reverse time migration, introduced in the middle 1980s by Lailly and Tarantola. The steepest descent direction can be calculated efficiently by using the symmetry of numerical Green's function derived from a mixed finite element method proposed by Nedelec for Maxwell's equation, without calculating the Jacobian matrix explicitly. We construct three different objective functions by taking the logarithm of the complex apparent resistivity as introduced in the recent waveform inversion algorithm by Shin and Min. These objective functions can be naturally separated into amplitude inversion, phase inversion and simultaneous inversion. We demonstrate our algorithm by showing three inversion results for synthetic data

  18. Interpretation of magnetotelluric data: Pasco Basin, south central Washington

    International Nuclear Information System (INIS)

    Orange, A.; Berkman, E.

    1985-01-01

    The purpose of this project was to review, evaluate, and interpret magnetotelluric (MT) data collected in support of the Basalt Waste Isolation Project. The integrated interpretation presented is related to regional and site-specific geology and associated borehole, gravity, and magnetic data. The MT interpretation procedure placed strong reliance on computer models based upon the inferred physical parameters of the subsurface materials and their anticipated variability. Much of the MT data is of poor quality by current standards; however, significant qualitative observations can be made. The quantification of these observations, including the procedures and assumption utilized, are discussed in detail. Problems related to ambiguities inherent in the MT method are discussed as related to the Pasco Basin MT data. 117 refs., 77 figs., 3 tabs

  19. XML Storage for Magnetotelluric Transfer Functions: Towards a Comprehensive Online Reference Database

    Science.gov (United States)

    Kelbert, A.; Blum, C.

    2015-12-01

    Magnetotelluric Transfer Functions (MT TFs) represent most of the information about Earth electrical conductivity found in the raw electromagnetic data, providing inputs for further inversion and interpretation. To be useful for scientific interpretation, they must also contain carefully recorded metadata. Making these data available in a discoverable and citable fashion would provide the most benefit to the scientific community, but such a development requires that the metadata is not only present in the file but is also searchable. The most commonly used MT TF format to date, the historical Society of Exploration Geophysicists Electromagnetic Data Interchange Standard 1987 (EDI), no longer supports some of the needs of modern magnetotellurics, most notably accurate error bars recording. Moreover, the inherent heterogeneity of EDI's and other historic MT TF formats has mostly kept the community away from healthy data sharing practices. Recently, the MT team at Oregon State University in collaboration with IRIS Data Management Center developed a new, XML-based format for MT transfer functions, and an online system for long-term storage, discovery and sharing of MT TF data worldwide (IRIS SPUD; www.iris.edu/spud/emtf). The system provides a query page where all of the MT transfer functions collected within the USArray MT experiment and other field campaigns can be searched for and downloaded; an automatic on-the-fly conversion to the historic EDI format is also included. To facilitate conversion to the new, more comprehensive and sustainable, XML format for MT TFs, and to streamline inclusion of historic data into the online database, we developed a set of open source format conversion tools, which can be used for rotation of MT TFs as well as a general XML EDI converter (https://seiscode.iris.washington.edu/projects/emtf-fcu). Here, we report on the newly established collaboration between the USGS Geomagnetism Program and the Oregon State University to gather and

  20. Magnetotelluric Detection Thresholds as a Function of Leakage Plume Depth, TDS and Volume

    Energy Technology Data Exchange (ETDEWEB)

    Yang, X. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Buscheck, T. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mansoor, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Carroll, S. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-04-21

    We conducted a synthetic magnetotelluric (MT) data analysis to establish a set of specific thresholds of plume depth, TDS concentration and volume for detection of brine and CO2 leakage from legacy wells into shallow aquifers in support of Strategic Monitoring Subtask 4.1 of the US DOE National Risk Assessment Partnership (NRAP Phase II), which is to develop geophysical forward modeling tools. 900 synthetic MT data sets span 9 plume depths, 10 TDS concentrations and 10 plume volumes. The monitoring protocol consisted of 10 MT stations in a 2×5 grid laid out along the flow direction. We model the MT response in the audio frequency range of 1 Hz to 10 kHz with a 50 Ωm baseline resistivity and the maximum depth up to 2000 m. Scatter plots show the MT detection thresholds for a trio of plume depth, TDS concentration and volume. Plumes with a large volume and high TDS located at a shallow depth produce a strong MT signal. We demonstrate that the MT method with surface based sensors can detect a brine and CO2 plume so long as the plume depth, TDS concentration and volume are above the thresholds. However, it is unlikely to detect a plume at a depth larger than 1000 m with the change of TDS concentration smaller than 10%. Simulated aquifer impact data based on the Kimberlina site provides a more realistic view of the leakage plume distribution than rectangular synthetic plumes in this sensitivity study, and it will be used to estimate MT responses over simulated brine and CO2 plumes and to evaluate the leakage detectability. Integration of the simulated aquifer impact data and the MT method into the NRAP DREAM tool may provide an optimized MT survey configuration for MT data collection. This study presents a viable approach for sensitivity study of geophysical monitoring methods for leakage detection. The results come in handy for rapid assessment of leakage detectability.

  1. Three-dimensional resistivity structure of Furnas volcano (Azores archipelago, Portugal) revealed by magnetotelluric data

    Science.gov (United States)

    Kiyan, Duygu; Hogg, Colin; Rath, Volker; Byrdina, Svetlana; Vandemeulebrouck, Jean; Revil, Andre; Silva, Catarina; Viveiros, Fatima; Ferreira, Teresa; Carmo, Rita

    2017-04-01

    The Furnas volcano is the eastern-most of the three active central volcanoes of Sao Miguel Island. The main caldera formed about 30 ka BP, followed by a younger eruption at 10-12 ka BP, which is responsible for the steep topography of more than 200 m in the target area. It contains several very young eruptive centers, and a shallow caldera lake. Tectonic features of varying directions have been identified in the caldera and its vicinity (Carmo et al., 2015). In the northern part of the caldera, containing the fumarole field of Caldeiras das Furnas, a detailed map of surface CO2 emissions was recently made available (Viveiros et al., 2010). Following a pilot survey of 13 AudioMagnetoTelluric soundings (AMT) and Electrical Resistivity Tomography (ERT) data collected along two profiles in the eastern part of Furnas caldera in 2015, a second campaign was completed in June 2016, yielding a total of 39 separate soundings including 15 broad-band magnetotelluric (MT) soundings to image the electrical conductivity of the subsurface. The data quality achieved by both techniques is very good, and initial results indicate a general correlation between regions of elevated conductivity at depth and the mapped surface CO2 emissions, suggesting that they may both be caused by the presence hydrothermal fluids. Dimensionality and directionality analysis using the WALDIM (Marti et al., 2009) approach in conjunction with Phase Tensor (Caldwell et al., 2004) indicate that the geo-electrical structure needs to be inverted in 3-D. Indicators of directionality derived from the analysis follow the general geological, fault dominated structural trend of NE-SW of Sao Miguel Island. A quantitative analysis of the potential influence of the Atlantic Ocean indicates that MT data up to 1 second period can be used in inversions with confidence without including the ocean. The 3-D inversions thus have been performed including only high-resolution topography and the Furnas lake bathymetry data

  2. A Method to Detect AAC Audio Forgery

    Directory of Open Access Journals (Sweden)

    Qingzhong Liu

    2015-08-01

    Full Text Available Advanced Audio Coding (AAC, a standardized lossy compression scheme for digital audio, which was designed to be the successor of the MP3 format, generally achieves better sound quality than MP3 at similar bit rates. While AAC is also the default or standard audio format for many devices and AAC audio files may be presented as important digital evidences, the authentication of the audio files is highly needed but relatively missing. In this paper, we propose a scheme to expose tampered AAC audio streams that are encoded at the same encoding bit-rate. Specifically, we design a shift-recompression based method to retrieve the differential features between the re-encoded audio stream at each shifting and original audio stream, learning classifier is employed to recognize different patterns of differential features of the doctored forgery files and original (untouched audio files. Experimental results show that our approach is very promising and effective to detect the forgery of the same encoding bit-rate on AAC audio streams. Our study also shows that shift recompression-based differential analysis is very effective for detection of the MP3 forgery at the same bit rate.

  3. On the detectability of Teide volcano magma chambers (Tenerife, Canary Islands) with magnetotelluric data

    Science.gov (United States)

    Piña-Varas, Perla; Ledo, Juanjo; Queralt, Pilar; Marcuello, Alex; Perez, Nemesio

    2018-01-01

    Tenerife has been the subject of numerous studies covering a wide range of fields. Many studies have been focused on characterising the magmatic plumbing system. Even so, a controversy still exists regarding the location and size of the current magma chambers. Several magnetotelluric (MT) surveys have been carried out in the island, but no conductivity anomalies associated with the chambers have been detected. We report the results of a set of tests conducted against the 3-D resistivity model of the island, to determine the characteristics of the detectable chambers with the MT data. The most remarkable results indicate that the MT dataset is incompatible with a large-scale mafic reservoir located at shallower depths than 8 km b.s.l. However, shallower phonolitic chambers smaller than 3 × 3 × 1 km3 could be undetected by the existing MT sites and new data should be acquired to confirm or not their existence. This new information is essential in volcanic islands like Tenerife, since many volcanic hazards are related to the size and depth of the sources of magma. Additionally, a joint interpretation of the obtained results together with other information is summarised in a hypothetical model, allowing us to better understand the internal structure of the island.[Figure not available: see fulltext.

  4. Magnetotelluric-Geochemistry Investigations of Blawan Geothermal Field, East Java, Indonesia

    Directory of Open Access Journals (Sweden)

    Sukir Maryanto

    2017-06-01

    Full Text Available An integrated magnetotelluric (MT and geochemical study of the Blawan geothermal field has been performed. The character of the hot springs, the reservoir temperature, and geothermal reserve potential of Blawan geothermal field are assessed. MT measurements, with 250 m up to 1200 m spacings, were made at 19 sites, and 6 locations at the Blawan hot springs have been sampled for geochemical survey. The results of 2D modelling indicated that the geothermal system in the research area consisted of a cap rock zone (≤32 Ω•m, reservoir zone (>32 – ≤512 Ω•m, and heat source zone (>512 Ω•m, and also identified faults. The characteristics of the hot spring water were identified through analyzing the major and minor elements. A ternary diagram (Cl-SO4-HCO3 showed that the Blawan hot springs consist of bicarbonate water (at locations of AP-01, AP-02, AP-03 and chloride water (at locations of AP-04, AP-05, and AP-06, with a reservoir temperature of approximately 90 °C based on the Na–K–Ca geothermometer results. An estimate of the geothermal energy using the volumetric method, gave a total geothermal reserve potential of 1.823 MWe.

  5. Likelihood of Brine and CO2 Leak Detection using Magnetotellurics and Electrical Resistivity Tomography Methods

    Energy Technology Data Exchange (ETDEWEB)

    Yang, X. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Buscheck, T. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mansoor, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Carroll, S. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-11

    The US DOE National Risk Assessment Partnership (NRAP), funded through the Office of Fossil Energy and NETL, is developing methods to evaluate the effectiveness of monitoring techniques to detect brine and CO2 leakage from legacy wells into underground sources of drinking water (USDW) overlying a CO2 storage reservoir. As part of the NRAP Strategic Monitoring group, we have generated 140 simulations of aquifer impact data based on the Kimberlina site in California’s southern San Joaquin Basin, Kimberlina Rev. 1.1. CO2 buoyancy allows some of the stored CO2 to reach shallower permeable zones and is detectable with surface geophysical sensors. We are using this simulated data set to evaluate effectiveness of electrical resistivity tomography (ERT) and magnetotellurics (MT) for leak detection. The evaluation of additional monitoring methods such as pressure, seismic and gravity is underway through a multi-lab collaboration.

  6. Semantic Context Detection Using Audio Event Fusion

    Directory of Open Access Journals (Sweden)

    Cheng Wen-Huang

    2006-01-01

    Full Text Available Semantic-level content analysis is a crucial issue in achieving efficient content retrieval and management. We propose a hierarchical approach that models audio events over a time series in order to accomplish semantic context detection. Two levels of modeling, audio event and semantic context modeling, are devised to bridge the gap between physical audio features and semantic concepts. In this work, hidden Markov models (HMMs are used to model four representative audio events, that is, gunshot, explosion, engine, and car braking, in action movies. At the semantic context level, generative (ergodic hidden Markov model and discriminative (support vector machine (SVM approaches are investigated to fuse the characteristics and correlations among audio events, which provide cues for detecting gunplay and car-chasing scenes. The experimental results demonstrate the effectiveness of the proposed approaches and provide a preliminary framework for information mining by using audio characteristics.

  7. Modified BTC Algorithm for Audio Signal Coding

    Directory of Open Access Journals (Sweden)

    TOMIC, S.

    2016-11-01

    Full Text Available This paper describes modification of a well-known image coding algorithm, named Block Truncation Coding (BTC and its application in audio signal coding. BTC algorithm was originally designed for black and white image coding. Since black and white images and audio signals have different statistical characteristics, the application of this image coding algorithm to audio signal presents a novelty and a challenge. Several implementation modifications are described in this paper, while the original idea of the algorithm is preserved. The main modifications are performed in the area of signal quantization, by designing more adequate quantizers for audio signal processing. The result is a novel audio coding algorithm, whose performance is presented and analyzed in this research. The performance analysis indicates that this novel algorithm can be successfully applied in audio signal coding.

  8. Digital audio watermarking fundamentals, techniques and challenges

    CERN Document Server

    Xiang, Yong; Yan, Bin

    2017-01-01

    This book offers comprehensive coverage on the most important aspects of audio watermarking, from classic techniques to the latest advances, from commonly investigated topics to emerging research subdomains, and from the research and development achievements to date, to current limitations, challenges, and future directions. It also addresses key topics such as reversible audio watermarking, audio watermarking with encryption, and imperceptibility control methods. The book sets itself apart from the existing literature in three main ways. Firstly, it not only reviews classical categories of audio watermarking techniques, but also provides detailed descriptions, analysis and experimental results of the latest work in each category. Secondly, it highlights the emerging research topic of reversible audio watermarking, including recent research trends, unique features, and the potentials of this subdomain. Lastly, the joint consideration of audio watermarking and encryption is also reviewed. With the help of this...

  9. AKTIVITAS SEKUNDER AUDIO UNTUK MENJAGA KEWASPADAAN PENGEMUDI MOBIL INDONESIA

    Directory of Open Access Journals (Sweden)

    Iftikar Zahedi Sutalaksana

    2013-03-01

    the awake, alert, and able to process all the stimulus well. The results of this study generate some form of audio response test that is integrated with the system drive in the car. Sound source is played with constant intensity between 80-85 dB. The sound will stop if the driver to respond to the sound stimulus. Response test is designed to be capable of monitoring the driver's level of alertness while driving. Its application is expected to help reduce the rate of traffic accidents in Indonesia. Keywords: driving, secondary activities, audio, alertness, response test

  10. Making the Switch to Digital Audio

    Directory of Open Access Journals (Sweden)

    Shannon Gwin Mitchell

    2004-12-01

    Full Text Available In this article, the authors describe the process of converting from analog to digital audio data. They address the step-by-step decisions that they made in selecting hardware and software for recording and converting digital audio, issues of system integration, and cost considerations. The authors present a brief description of how digital audio is being used in their current research project and how it has enhanced the “quality” of their qualitative research.

  11. New audio applications of beryllium metal

    International Nuclear Information System (INIS)

    Sato, M.

    1977-01-01

    The major applications of beryllium metal in the field of audio appliances are for the vibrating cones for the two types of speakers 'TWITTER' for high range sound and 'SQUAWKER' for mid range sound, and also for beryllium cantilever tube assembled in stereo cartridge. These new applications are based on the characteristic property of beryllium having high ratio of modulus of elasticity to specific gravity. The production of these audio parts is described, and the audio response is shown. (author)

  12. Distortion Estimation in Compressed Music Using Only Audio Fingerprints

    NARCIS (Netherlands)

    Doets, P.J.O.; Lagendijk, R.L.

    2008-01-01

    An audio fingerprint is a compact yet very robust representation of the perceptually relevant parts of an audio signal. It can be used for content-based audio identification, even when the audio is severely distorted. Audio compression changes the fingerprint slightly. We show that these small

  13. Magnetotelluric Investigations in Tuwa-Godhra Region, Gujarat (India)

    Science.gov (United States)

    Mohan, Kapil; Chaudhary, Peush; Kumar, G. Pavan; Kothyari, Girish Ch.; Choudhary, Virender; Nagar, Mehul; Patel, Pruthul; Gandhi, Drasti; Kushwaha, Dilip; Rastogi, B. K.

    2018-05-01

    Magnetotelluric (MT) data have been acquired at 40 locations in Tuwa and its surrounding region (200 km east of Ahmedabad and 15 km north-northwest of Godhra) in the Mainland Gujarat with an average station spacing of 1.5 km. MT impedance tensors have been estimated in the period range of 0.001-100 s. The data have been modeled using non-linear conjugate gradient scheme taking both apparent resistivity and phase into account. From the 2D models of the MT data, the weathered granite with Quaternary sediments (with resistivity of area (having resistivity value ranging from 103 to 104 Ω m) separated from the Godhra granite by a contact zone. The comparatively very low-resistivity rocks (contact zone of Lunavada and Champaner groups has been suggested. The presence of hot water springs in 10 km SW from the center of the study area (at the contact zone of Godhra granite and basalt) might be due to the western trending lithostratigraphic slope, hydrostatic pressure generated due to heat produced from interaction of water with the carbonate rocks at deeper depth and high subsurface temperature due to high geothermal gradient. The segmented nature of Himmatnagar Fault (HnF) is identified in the central portion of the study area.

  14. Extensional Tectonic Regime of Garut Basin based on Magnetotelluric Analysis

    Directory of Open Access Journals (Sweden)

    Lina Handayani

    2014-07-01

    Full Text Available DOI: 10.17014/ijog.v8i3.162Garut Basin are is part of Bandung-Garut Greater Basin (Bandung Zone characterized by a large basin surrounded by mountain ranges. Active volcanoes had distributed their material as pyroclastic deposits around the outer border of the zone and as lava flow deposit separating the two basins. Bouguer gravity anomaly data had also indicated the presence of several low anomaly closures at about the area of Bandung and Garut Basins that were surrounded by high gravity anomaly zones. Two magnetotelluric surveys were completed to acquire the subsurface model that might explain the tectonic evolution of studied area. The first stage was characterized sby the presence of horst - graben structures that might imply an extensional regime of the area. The next stage of evolutionwas indicated by the horizontal layering correlated to the relative non-active tectonic. In addition, a most recent structure that appeared near the surface might suggest a possible extension force as the current stage.

  15. Magnetotelluric soundings on the Idaho National Engineering Laboratory facility, Idaho

    International Nuclear Information System (INIS)

    Stanley, W.D.

    1982-01-01

    The magnetotelluric (MT) method was used as one of several geophysical tools to study part of the Idaho Engineering Laboratory (INEL) facility. The purpose of the geophysical study on INEL was to investigate the facility for a possible site to drill a geothermal exploration well. The initial interpretation of the MT sounding data was done with one-dimensional models consisting of four or five layers, the minimum number required to fit the data. After the test well (INEL-1) was completed, the electric log was used to guide an improved one-dimensional ID interpretation of the MT sounding data. Profile models derived from the well log provided good agreement with velocity models derived from refraction seismic data. A resolution study using generalized inverse techniques shows that the resolution of resistive layers in the lower part of the MT models is poor, as is the definition of a shallow, altered basalt unit. The only major structure observed on the MT data was the faulted contact between the SNRP and basin and range structures on the west. Modeling of the data near this structure with a two-dimensional computer program showed that the MT data near the fault require a model similar to the seismic refraction models and that structure on a deep crustal conductor is also required

  16. Audio Recording of Children with Dyslalia

    Directory of Open Access Journals (Sweden)

    Stefan Gheorghe Pentiuc

    2008-01-01

    Full Text Available In this paper we present our researches regarding automat parsing of audio recordings. These recordings are obtained from children with dyslalia and are necessary for an accurate identification of speech problems. We develop a software application that helps parsing audio, real time, recordings.

  17. Audio Recording of Children with Dyslalia

    OpenAIRE

    Stefan Gheorghe Pentiuc; Maria D. Schipor; Ovidiu A. Schipor

    2008-01-01

    In this paper we present our researches regarding automat parsing of audio recordings. These recordings are obtained from children with dyslalia and are necessary for an accurate identification of speech problems. We develop a software application that helps parsing audio, real time, recordings.

  18. A listening test system for automotive audio

    DEFF Research Database (Denmark)

    Christensen, Flemming; Geoff, Martin; Minnaar, Pauli

    2005-01-01

    This paper describes a system for simulating automotive audio through headphones for the purposes of conducting listening experiments in the laboratory. The system is based on binaural technology and consists of a component for reproducing the sound of the audio system itself and a component...

  19. Fusion for Audio-Visual Laughter Detection

    NARCIS (Netherlands)

    Reuderink, B.

    2007-01-01

    Laughter is a highly variable signal, and can express a spectrum of emotions. This makes the automatic detection of laughter a challenging but interesting task. We perform automatic laughter detection using audio-visual data from the AMI Meeting Corpus. Audio-visual laughter detection is performed

  20. Audio-Visual Classification of Sports Types

    DEFF Research Database (Denmark)

    Gade, Rikke; Abou-Zleikha, Mohamed; Christensen, Mads Græsbøll

    2015-01-01

    In this work we propose a method for classification of sports types from combined audio and visual features ex- tracted from thermal video. From audio Mel Frequency Cepstral Coefficients (MFCC) are extracted, and PCA are applied to reduce the feature space to 10 dimensions. From the visual modali...

  1. Two-dimensional joint inversion of Magnetotelluric and local earthquake data: Discussion on the contribution to the solution of deep subsurface structures

    Science.gov (United States)

    Demirci, İsmail; Dikmen, Ünal; Candansayar, M. Emin

    2018-02-01

    Joint inversion of data sets collected by using several geophysical exploration methods has gained importance and associated algorithms have been developed. To explore the deep subsurface structures, Magnetotelluric and local earthquake tomography algorithms are generally used individually. Due to the usage of natural resources in both methods, it is not possible to increase data quality and resolution of model parameters. For this reason, the solution of the deep structures with the individual usage of the methods cannot be fully attained. In this paper, we firstly focused on the effects of both Magnetotelluric and local earthquake data sets on the solution of deep structures and discussed the results on the basis of the resolving power of the methods. The presence of deep-focus seismic sources increase the resolution of deep structures. Moreover, conductivity distribution of relatively shallow structures can be solved with high resolution by using MT algorithm. Therefore, we developed a new joint inversion algorithm based on the cross gradient function in order to jointly invert Magnetotelluric and local earthquake data sets. In the study, we added a new regularization parameter into the second term of the parameter correction vector of Gallardo and Meju (2003). The new regularization parameter is enhancing the stability of the algorithm and controls the contribution of the cross gradient term in the solution. The results show that even in cases where resistivity and velocity boundaries are different, both methods influence each other positively. In addition, the region of common structural boundaries of the models are clearly mapped compared with original models. Furthermore, deep structures are identified satisfactorily even with using the minimum number of seismic sources. In this paper, in order to understand the future studies, we discussed joint inversion of Magnetotelluric and local earthquake data sets only in two-dimensional space. In the light of these

  2. Detecting double compression of audio signal

    Science.gov (United States)

    Yang, Rui; Shi, Yun Q.; Huang, Jiwu

    2010-01-01

    MP3 is the most popular audio format nowadays in our daily life, for example music downloaded from the Internet and file saved in the digital recorder are often in MP3 format. However, low bitrate MP3s are often transcoded to high bitrate since high bitrate ones are of high commercial value. Also audio recording in digital recorder can be doctored easily by pervasive audio editing software. This paper presents two methods for the detection of double MP3 compression. The methods are essential for finding out fake-quality MP3 and audio forensics. The proposed methods use support vector machine classifiers with feature vectors formed by the distributions of the first digits of the quantized MDCT (modified discrete cosine transform) coefficients. Extensive experiments demonstrate the effectiveness of the proposed methods. To the best of our knowledge, this piece of work is the first one to detect double compression of audio signal.

  3. Audio-Visual Speaker Diarization Based on Spatiotemporal Bayesian Fusion.

    Science.gov (United States)

    Gebru, Israel D; Ba, Sileye; Li, Xiaofei; Horaud, Radu

    2018-05-01

    Speaker diarization consists of assigning speech signals to people engaged in a dialogue. An audio-visual spatiotemporal diarization model is proposed. The model is well suited for challenging scenarios that consist of several participants engaged in multi-party interaction while they move around and turn their heads towards the other participants rather than facing the cameras and the microphones. Multiple-person visual tracking is combined with multiple speech-source localization in order to tackle the speech-to-person association problem. The latter is solved within a novel audio-visual fusion method on the following grounds: binaural spectral features are first extracted from a microphone pair, then a supervised audio-visual alignment technique maps these features onto an image, and finally a semi-supervised clustering method assigns binaural spectral features to visible persons. The main advantage of this method over previous work is that it processes in a principled way speech signals uttered simultaneously by multiple persons. The diarization itself is cast into a latent-variable temporal graphical model that infers speaker identities and speech turns, based on the output of an audio-visual association process, executed at each time slice, and on the dynamics of the diarization variable itself. The proposed formulation yields an efficient exact inference procedure. A novel dataset, that contains audio-visual training data as well as a number of scenarios involving several participants engaged in formal and informal dialogue, is introduced. The proposed method is thoroughly tested and benchmarked with respect to several state-of-the art diarization algorithms.

  4. Magnetotelluric investigation in West Greenland - considering the polar electrojet, ocean and fjords

    DEFF Research Database (Denmark)

    Lauritsen, Nynne Louise Berthou

    results, however the multiple station technique improves the data quality around 1 s compared to the single station technique. Different challenges are connected with the survey location, where ocean and fjord systems have a large impact on the transferfunctions. A 3D model study of the impact of fjords...... on induction arrows is presented, illustrating the importance of including these in magnetotelluric modelling. This informationis included in the 3D modelling of the magnetotelluric survey in Greenland, together with the bathymetry of the ocean. The modelling shows that the impact from the fjords and ocean...

  5. Magnetotelluric data collected to characterize aquifers in the San Luis Basin, New Mexico

    Science.gov (United States)

    Ailes, Chad E.; Rodriguez, Brian D.

    2015-01-01

    The U.S. Geological Survey is conducting a series of multidisciplinary studies of the San Luis Basin as part of the Geologic Framework of Rio Grande Basins project. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, magnetotelluric surveys, and hydrologic and lithologic data are being used to better understand the aquifers in the San Luis Basin. This report describes one north-south and two east-west regional magnetotelluric sounding profiles, acquired in June of 2010 and July and August of 2011, across the San Luis Basin in northern New Mexico. No interpretation of the data is included.

  6. Imaging the magmatic system of Mono Basin, California with magnetotellurics in three--dimensions

    Science.gov (United States)

    Peacock, Jared R.; Mangan, Margaret T.; McPhee, Darcy K.; Ponce, David A.

    2015-01-01

    A three–dimensional (3D) electrical resistivity model of Mono Basin in eastern California unveils a complex subsurface filled with zones of partial melt, fluid–filled fracture networks, cold plutons, and regional faults. In 2013, 62 broadband magnetotelluric (MT) stations were collected in an array around southeastern Mono Basin from which a 3D electrical resistivity model was created with a resolvable depth of 35 km. Multiple robust electrical resistivity features were found that correlate with existing geophysical observations. The most robust features are two 300 ± 50 km3 near-vertical conductive bodies (3–10 Ω·m) that underlie the southeast and north-eastern margin of Mono Craters below 10 km depth. These features are interpreted as magmatic crystal–melt mush zones of 15 ± 5% interstitial melt surrounded by hydrothermal fluids and are likely sources for Holocene eruptions. Two conductive east–dipping structures appear to connect each magma source region to the surface. A conductive arc–like structure (resistivity (200 Ω·m) suggestive of a cooled connection. A third, less constrained conductive feature (4–10 Ω·m) 15 km deep extending to 35 km is located west of Mono Craters near the eastern front of the Sierra Nevada escarpment, and is coincident with a zone of sporadic, long–period earthquakes that are characteristic of a fluid-filled (magmatic or metamorphic) fracture network. A resistive feature (103–105 Ω·m) located under Aeolian Buttes contains a deep root down to 25 km. The eastern edge of this resistor appears to structurally control the arcuate shape of Mono Craters. These observations have been combined to form a new conceptual model of the magmatic system beneath Mono Craters to a depth of 30 km.

  7. Magnetotelluric investigation of the Vestfold Hills and Rauer Group, East Antarctica

    Science.gov (United States)

    Peacock, Jared R.; Selway, Katherine

    2016-01-01

    The Vestfold Hills and Rauer Group in East Antarctica have contrasting Archean to Neoproterozoic geological histories and are believed to be juxtaposed along a suture zone that now lies beneath the Sørsdal Glacier. Exact location and age of this suture zone are unknown, as is its relationship to regional deformation associated with the amalgamation of East Gondwana. To image the suture zone, magnetotelluric (MT) data were collected in Prydz Bay, East Antarctica, mainly along a profile crossing the Sørsdal Glacier and regions inland of the Vestfold Hills and Rauer Group islands. Time-frequency analysis of the MT time series yielded three important observations: (1) Wind speeds in excess of ∼8 m/s reduce coherence between electric and magnetic fields due to charged wind-blown particles of ice and snow. (2) Estimation of the MT transfer function is best between 1000 and 1400 UT when ionospheric Hall currents enhance the magnetic source field. (3) Nonplanar source field effects were minimal but detectable and removed from estimation of the MT transfer function. Inversions of MT data in 2-D and 3-D produce similar resistivity models, where structures in the preferred 3-D resistivity model correlate strongly with regional magnetic data. The electrically conductive Rauer Group is separated from the less conductive Vestfold Hills by a resistive zone under the Sørsdal Glacier, which is interpreted to be caused by oxidation during suturing. Though a suture zone has been imaged, no time constrains on suturing can be made from the MT data.

  8. Digital signal processor for silicon audio playback devices; Silicon audio saisei kikiyo digital signal processor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The digital audio signal processor (DSP) TC9446F series has been developed silicon audio playback devices with a memory medium of, e.g., flash memory, DVD players, and AV devices, e.g., TV sets. It corresponds to AAC (advanced audio coding) (2ch) and MP3 (MPEG1 Layer3), as the audio compressing techniques being used for transmitting music through an internet. It also corresponds to compressed types, e.g., Dolby Digital, DTS (digital theater system) and MPEG2 audio, being adopted for, e.g., DVDs. It can carry a built-in audio signal processing program, e.g., Dolby ProLogic, equalizer, sound field controlling, and 3D sound. TC9446XB has been lined up anew. It adopts an FBGA (fine pitch ball grid array) package for portable audio devices. (translated by NEDO)

  9. Correspondence between audio and visual deep models for musical instrument detection in video recordings

    OpenAIRE

    Slizovskaia, Olga; Gómez, Emilia; Haro, Gloria

    2017-01-01

    This work aims at investigating cross-modal connections between audio and video sources in the task of musical instrument recognition. We also address in this work the understanding of the representations learned by convolutional neural networks (CNNs) and we study feature correspondence between audio and visual components of a multimodal CNN architecture. For each instrument category, we select the most activated neurons and investigate exist- ing cross-correlations between neurons from the ...

  10. Magnetotelluric Investigation in the Jiyang Depression and its Adjacent Areas

    Science.gov (United States)

    Zhang, L.; Hao, T.; Duan, Q.

    2008-12-01

    The Jiyang Depression is a secondary tectonic unit of the Bohai Bay Basin, and is a Mesozoic-Cenozoic continental-facie depositional depression. The Jiyang Depression consists of the Dongying, Zanhua, Chezhen, and Huimin sags, and the Yihezhuang, Chenjiazhuang, Qingcheng, Binxian, Guangrao, Shouguang, and heaves. In order to delineate shallow and deep structures of the depression, we conduct a magnetotelluric (MT) investigation in the Jiyang Depression and its adjacent areas. We use a remote reference setup to reduce noise disturbance, when several magnetotelluric sounding stations are measuring synchronously at different sites. The acquired MT data are to be processed and interpreted. We execute time series processing with the remote reference technique. The surveyed area is seriously interfered by noise. To improve quality of the data, we perform noise identification and manual selection of the time series segments. Identification of polarization modes is an important task for MT data qualitative interpretation. We apply for a PCA (principal component analysis) based method to automatically identify apparent polarized resistivity curves of TE and TM modes. The method recognizes the distortion and major variation of TE and TM curves and distinguishes the two kinds of curves with principal component analysis. From the apparent resistivity-frequency profile result, we can see that the Chenning Uplift and the Chenjiazhuang Heave reveal a 3-layered structure of medium-low-high, from the shallow to the deep. The structure is especially distinct for the Chenning Uplift, where there is a laterally steady-spreading high- resistivity zone corresponding to the frequency band lower than 1 Hz. The Dongying Sag is characteristic of high-low-medium from the shallow to the deep, and has a low-resistivity anomaly zone with obvious and wide lateral extending in the medium frequency band, which reflects that the deposition thickness of the basin is relatively big. The Guangrao

  11. Accounting for the Effect of Earth's Rotation in Magnetotelluric Inference

    Science.gov (United States)

    Riegert, D. L.; Thomson, D. J.

    2017-12-01

    The study of geomagnetism has been documented as far back as 1722 when the watchmaker G. Graham constructed a more sensitive compass and showed that the variations in geomagnetic direction varied with an irregular daily pattern. Increased interest in geomagnetism in geomagnetism began at the end of the 19th century (Lamb, Schuster, Chapman, and Price). The Magnetotelluric Method was first introduced in the 1950's (Cagniard and Tikhonov), and, at its core, is simply a regression problem. The result of this method is a transfer function estimate which describes the earth's response to magnetic field variations. This estimate can then be used to infer the earth's subsurface structure; useful for applications such as natural resource exploration. The statistical problem of estimating a transfer function between geomagnetic and induced current measurements has evolved since the 1950's due to a variety of problems: non-stationarity, outliers, and violation of Gaussian assumptions. To address some of these issues, robust regression methods (Chave and Thomson, 2004) and the remote reference method (Gambel, 1979) have been proposed and used. The current method seems to provide reasonable estimates, but still requires a large amount of data. Using the multitaper method of spectral analysis (Thomson, 1982), taking long (greater than 4 months) blocks of geomagnetic data, and concentrating on frequencies below 1000 microhertz to avoid ultraviolet effects, one finds that:1) the cross-spectra are dominated by many offset frequencies including plus and minus 1 and 2 cycles per day;2) the coherence at these offset frequencies is often stronger than at zero offset;3) there are strong couplings from the "quasi two-day" cycle;4) frequencines are usually not symmetric;5) the spectra are dominated by the normal modes of the Sun. This talk will discuss the method of incorporating these observations into the transfer function estimation model, some of the difficulties that arose, their

  12. Efficient hierarchical trans-dimensional Bayesian inversion of magnetotelluric data

    Science.gov (United States)

    Xiang, Enming; Guo, Rongwen; Dosso, Stan E.; Liu, Jianxin; Dong, Hao; Ren, Zhengyong

    2018-06-01

    This paper develops an efficient hierarchical trans-dimensional (trans-D) Bayesian algorithm to invert magnetotelluric (MT) data for subsurface geoelectrical structure, with unknown geophysical model parameterization (the number of conductivity-layer interfaces) and data-error models parameterized by an auto-regressive (AR) process to account for potential error correlations. The reversible-jump Markov-chain Monte Carlo algorithm, which adds/removes interfaces and AR parameters in birth/death steps, is applied to sample the trans-D posterior probability density for model parameterization, model parameters, error variance and AR parameters, accounting for the uncertainties of model dimension and data-error statistics in the uncertainty estimates of the conductivity profile. To provide efficient sampling over the multiple subspaces of different dimensions, advanced proposal schemes are applied. Parameter perturbations are carried out in principal-component space, defined by eigen-decomposition of the unit-lag model covariance matrix, to minimize the effect of inter-parameter correlations and provide effective perturbation directions and length scales. Parameters of new layers in birth steps are proposed from the prior, instead of focused distributions centred at existing values, to improve birth acceptance rates. Parallel tempering, based on a series of parallel interacting Markov chains with successively relaxed likelihoods, is applied to improve chain mixing over model dimensions. The trans-D inversion is applied in a simulation study to examine the resolution of model structure according to the data information content. The inversion is also applied to a measured MT data set from south-central Australia.

  13. TECHNICAL NOTE: Portable audio electronics for impedance-based measurements in microfluidics

    Science.gov (United States)

    Wood, Paul; Sinton, David

    2010-08-01

    We demonstrate the use of audio electronics-based signals to perform on-chip electrochemical measurements. Cell phones and portable music players are examples of consumer electronics that are easily operated and are ubiquitous worldwide. Audio output (play) and input (record) signals are voltage based and contain frequency and amplitude information. A cell phone, laptop soundcard and two compact audio players are compared with respect to frequency response; the laptop soundcard provides the most uniform frequency response, while the cell phone performance is found to be insufficient. The audio signals in the common portable music players and laptop soundcard operate in the range of 20 Hz to 20 kHz and are found to be applicable, as voltage input and output signals, to impedance-based electrochemical measurements in microfluidic systems. Validated impedance-based measurements of concentration (0.1-50 mM), flow rate (2-120 µL min-1) and particle detection (32 µm diameter) are demonstrated. The prevailing, lossless, wave audio file format is found to be suitable for data transmission to and from external sources, such as a centralized lab, and the cost of all hardware (in addition to audio devices) is ~10 USD. The utility demonstrated here, in combination with the ubiquitous nature of portable audio electronics, presents new opportunities for impedance-based measurements in portable microfluidic systems.

  14. Design of batch audio/video conversion platform based on JavaEE

    Science.gov (United States)

    Cui, Yansong; Jiang, Lianpin

    2018-03-01

    With the rapid development of digital publishing industry, the direction of audio / video publishing shows the diversity of coding standards for audio and video files, massive data and other significant features. Faced with massive and diverse data, how to quickly and efficiently convert to a unified code format has brought great difficulties to the digital publishing organization. In view of this demand and present situation in this paper, basing on the development architecture of Sptring+SpringMVC+Mybatis, and combined with the open source FFMPEG format conversion tool, a distributed online audio and video format conversion platform with a B/S structure is proposed. Based on the Java language, the key technologies and strategies designed in the design of platform architecture are analyzed emphatically in this paper, designing and developing a efficient audio and video format conversion system, which is composed of “Front display system”, "core scheduling server " and " conversion server ". The test results show that, compared with the ordinary audio and video conversion scheme, the use of batch audio and video format conversion platform can effectively improve the conversion efficiency of audio and video files, and reduce the complexity of the work. Practice has proved that the key technology discussed in this paper can be applied in the field of large batch file processing, and has certain practical application value.

  15. High-Fidelity Piezoelectric Audio Device

    Science.gov (United States)

    Woodward, Stanley E.; Fox, Robert L.; Bryant, Robert G.

    2003-01-01

    ModalMax is a very innovative means of harnessing the vibration of a piezoelectric actuator to produce an energy efficient low-profile device with high-bandwidth high-fidelity audio response. The piezoelectric audio device outperforms many commercially available speakers made using speaker cones. The piezoelectric device weighs substantially less (4 g) than the speaker cones which use magnets (10 g). ModalMax devices have extreme fabrication simplicity. The entire audio device is fabricated by lamination. The simplicity of the design lends itself to lower cost. The piezoelectric audio device can be used without its acoustic chambers and thereby resulting in a very low thickness of 0.023 in. (0.58 mm). The piezoelectric audio device can be completely encapsulated, which makes it very attractive for use in wet environments. Encapsulation does not significantly alter the audio response. Its small size (see Figure 1) is applicable to many consumer electronic products, such as pagers, portable radios, headphones, laptop computers, computer monitors, toys, and electronic games. The audio device can also be used in automobile or aircraft sound systems.

  16. Implementing Audio-CASI on Windows’ Platforms

    Science.gov (United States)

    Cooley, Philip C.; Turner, Charles F.

    2011-01-01

    Audio computer-assisted self interviewing (Audio-CASI) technologies have recently been shown to provide important and sometimes dramatic improvements in the quality of survey measurements. This is particularly true for measurements requiring respondents to divulge highly sensitive information such as their sexual, drug use, or other sensitive behaviors. However, DOS-based Audio-CASI systems that were designed and adopted in the early 1990s have important limitations. Most salient is the poor control they provide for manipulating the video presentation of survey questions. This article reports our experiences adapting Audio-CASI to Microsoft Windows 3.1 and Windows 95 platforms. Overall, our Windows-based system provided the desired control over video presentation and afforded other advantages including compatibility with a much wider array of audio devices than our DOS-based Audio-CASI technologies. These advantages came at the cost of increased system requirements --including the need for both more RAM and larger hard disks. While these costs will be an issue for organizations converting large inventories of PCS to Windows Audio-CASI today, this will not be a serious constraint for organizations and individuals with small inventories of machines to upgrade or those purchasing new machines today. PMID:22081743

  17. Musical Audio Synthesis Using Autoencoding Neural Nets

    OpenAIRE

    Sarroff, Andy; Casey, Michael A.

    2014-01-01

    With an optimal network topology and tuning of hyperpa-\\ud rameters, artificial neural networks (ANNs) may be trained\\ud to learn a mapping from low level audio features to one\\ud or more higher-level representations. Such artificial neu-\\ud ral networks are commonly used in classification and re-\\ud gression settings to perform arbitrary tasks. In this work\\ud we suggest repurposing autoencoding neural networks as\\ud musical audio synthesizers. We offer an interactive musi-\\ud cal audio synt...

  18. Three-dimensional Magnetotelluric Characterization of the Xinzhou Geothermal Field, Southeastern China

    Science.gov (United States)

    Han, Q.; Hu, X.; Cai, J.; Wei, W.

    2016-12-01

    Xinzhou geothermal field is located in the Guangdong province and adjacent to the China South Sea, and its hot springs can reach up to 92 degree Celsius. Yanshanian granite expose widely in the south of this geothermal field and four faults cut across each other over it. A dense grid of 176 magnetotelluric (MT) sites with broadband has been acquired over the Xinzhou geothermal field and its surrounding area. Due to the related electromagnetic (EM) noise one permanent observatory was placed as a remote reference to suppress this cultural EM noise interference. The datasets are processed using the mutual reference technique, static shift correction, and structural strike and dimensionality analysis based on tensor decomposition. Data analysis reveals that the underground conductivity structure has obvious three-dimensional characterization. For the high resolution result ,two and three dimensional inversion are both applied in this area employing the non-linear conjugate gradient method (NLCG).These MT data sets are supposed to detect the deep subsurface resistivity structure correlated to the distribution of geothermal reservoir (such as faults and fractured granite) and investigate the channel of the upwelling magma. The whole and cold granite usually present high resistivity but once it functions as reservoir the resistivity will decrease, sometimes it is hard to separate the reservoir from the cap layer. The 3D inversion results delineate three high resistivity anomalies distributed in different locations. At last we put forward that the large areas of granite form the major thermal source for the study area and discuss whether any melt under these magma intrusions exists.

  19. A closely-spaced magnetotelluric study of the Ahuachapan-Chipilapa geothermal field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Romo, Jose Manuel; Flores, Carlos; Vega, Raymundo; Vazquez, Rogelio; Flores, Marco A. Perez; Trevino, Enrique Gomez; Esparza, Francisco J; Garcia, Victor H [Centro de Investigacion Cientifica y de Educacion Superior de Ensenada, Baja California (Mexico); Quijano, Julio E [Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL), Santa Tecla (El Salvador)

    1997-12-01

    The distribution of electrical conductivity beneath the Ahuachapan-Chipilapa geothermal area was simulated using 2-D models based on 126 closely-spaced magnetotelluric (MT) measurements. The observed MT response was interpreted as being produced by the superposition of two orthogonal geological structural systems: an approximately E-W regional trend associated with the Central Graben structure, which affects the loner period response, and a local and younger N-S fault system that is responsible for the short-to-intermediate period data. The MT response in the 0.02-10 s range period was used to simulate the conductivity structure within the first 2 km depth. By correlating the low-resistivity zones between twelve 2-D models, maps of the spatial distribution of conductors at three different depth levels were constructed. Three deep conductors were identified, one of the associated with the Ahuachapan reservoir, another apparently related to the Laguna Verde volcano, and a third one controlled by El Tortuguero Graben. The subsurface geometry of these conductivity anomalies suggests that the the Chipilapa and La Labor hot springs are supplied by two separate sources of hot fluids, one coming from the east and the other from the south or southwest. The distribution of the shallow high-conductivity zones agrees with the hydrothermal alteration zones mapped at the surface, suggesting that at shallow levels the argillitization process contributes significantly to the low resistivity. The large number of drillholes and the dense MT site coverage allowed the definition of important correlations between high temperatures and high conductivity, as well as between deep conductivity anomalies and productive wells. On this basis two years for future drilling are proposed. (Author)

  20. Virtual environment display for a 3D audio room simulation

    Science.gov (United States)

    Chapin, William L.; Foster, Scott

    1992-06-01

    Recent developments in virtual 3D audio and synthetic aural environments have produced a complex acoustical room simulation. The acoustical simulation models a room with walls, ceiling, and floor of selected sound reflecting/absorbing characteristics and unlimited independent localizable sound sources. This non-visual acoustic simulation, implemented with 4 audio ConvolvotronsTM by Crystal River Engineering and coupled to the listener with a Poihemus IsotrakTM, tracking the listener's head position and orientation, and stereo headphones returning binaural sound, is quite compelling to most listeners with eyes closed. This immersive effect should be reinforced when properly integrated into a full, multi-sensory virtual environment presentation. This paper discusses the design of an interactive, visual virtual environment, complementing the acoustic model and specified to: 1) allow the listener to freely move about the space, a room of manipulable size, shape, and audio character, while interactively relocating the sound sources; 2) reinforce the listener's feeling of telepresence into the acoustical environment with visual and proprioceptive sensations; 3) enhance the audio with the graphic and interactive components, rather than overwhelm or reduce it; and 4) serve as a research testbed and technology transfer demonstration. The hardware/software design of two demonstration systems, one installed and one portable, are discussed through the development of four iterative configurations. The installed system implements a head-coupled, wide-angle, stereo-optic tracker/viewer and multi-computer simulation control. The portable demonstration system implements a head-mounted wide-angle, stereo-optic display, separate head and pointer electro-magnetic position trackers, a heterogeneous parallel graphics processing system, and object oriented C++ program code.

  1. Subduction of the Rivera plate beneath the Jalisco block as imaged by magnetotelluric data

    OpenAIRE

    Corbo-Camargo, Fernando; Arzate-Flores, Jorge Arturo; Álvarez-Béjar, Román; Aranda-Gómez, José Jorge; Yutsis, Vsevolod

    2013-01-01

    Two magnetotelluric (MT) profiles perpendicular to the trench provide information on the subduction of the Rivera plate under the Jalisco block (JB). The geometry of the subducting slab is inferred by the anomalous conductor on the top of the profile in the central part of the JB. High conductivity zones (

  2. Three-dimensional electrical resistivity model of the hydrothermal system in Long Valley Caldera, California, from magnetotellurics

    Science.gov (United States)

    Peacock, Jared R.; Mangan, Margaret T.; McPhee, Darcy K.; Wannamaker, Phil E.

    2016-01-01

    Though shallow flow of hydrothermal fluids in Long Valley Caldera, California, has been well studied, neither the hydrothermal source reservoir nor heat source has been well characterized. Here a grid of magnetotelluric data were collected around the Long Valley volcanic system and modeled in 3-D. The preferred electrical resistivity model suggests that the source reservoir is a narrow east-west elongated body 4 km below the west moat. The heat source could be a zone of 2–5% partial melt 8 km below Deer Mountain. Additionally, a collection of hypersaline fluids, not connected to the shallow hydrothermal system, is found 3 km below the medial graben, which could originate from a zone of 5–10% partial melt 8 km below the south moat. Below Mammoth Mountain is a 3 km thick isolated body containing fluids and gases originating from an 8 km deep zone of 5–10% basaltic partial melt.

  3. Parametric time-frequency domain spatial audio

    CERN Document Server

    Delikaris-Manias, Symeon; Politis, Archontis

    2018-01-01

    This book provides readers with the principles and best practices in spatial audio signal processing. It describes how sound fields and their perceptual attributes are captured and analyzed within the time-frequency domain, how essential representation parameters are coded, and how such signals are efficiently reproduced for practical applications. The book is split into four parts starting with an overview of the fundamentals. It then goes on to explain the reproduction of spatial sound before offering an examination of signal-dependent spatial filtering. The book finishes with coverage of both current and future applications and the direction that spatial audio research is heading in. Parametric Time-frequency Domain Spatial Audio focuses on applications in entertainment audio, including music, home cinema, and gaming--covering the capturing and reproduction of spatial sound as well as its generation, transduction, representation, transmission, and perception. This book will teach readers the tools needed...

  4. Design of an audio advertisement dataset

    Science.gov (United States)

    Fu, Yutao; Liu, Jihong; Zhang, Qi; Geng, Yuting

    2015-12-01

    Since more and more advertisements swarm into radios, it is necessary to establish an audio advertising dataset which could be used to analyze and classify the advertisement. A method of how to establish a complete audio advertising dataset is presented in this paper. The dataset is divided into four different kinds of advertisements. Each advertisement's sample is given in *.wav file format, and annotated with a txt file which contains its file name, sampling frequency, channel number, broadcasting time and its class. The classifying rationality of the advertisements in this dataset is proved by clustering the different advertisements based on Principal Component Analysis (PCA). The experimental results show that this audio advertisement dataset offers a reliable set of samples for correlative audio advertisement experimental studies.

  5. Augmenting Environmental Interaction in Audio Feedback Systems

    Directory of Open Access Journals (Sweden)

    Seunghun Kim

    2016-04-01

    Full Text Available Audio feedback is defined as a positive feedback of acoustic signals where an audio input and output form a loop, and may be utilized artistically. This article presents new context-based controls over audio feedback, leading to the generation of desired sonic behaviors by enriching the influence of existing acoustic information such as room response and ambient noise. This ecological approach to audio feedback emphasizes mutual sonic interaction between signal processing and the acoustic environment. Mappings from analyses of the received signal to signal-processing parameters are designed to emphasize this specificity as an aesthetic goal. Our feedback system presents four types of mappings: approximate analyses of room reverberation to tempo-scale characteristics, ambient noise to amplitude and two different approximations of resonances to timbre. These mappings are validated computationally and evaluated experimentally in different acoustic conditions.

  6. CERN automatic audio-conference service

    CERN Multimedia

    Sierra Moral, R

    2009-01-01

    Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first Euro...

  7. Virtual Microphones for Multichannel Audio Resynthesis

    Directory of Open Access Journals (Sweden)

    Athanasios Mouchtaris

    2003-09-01

    Full Text Available Multichannel audio offers significant advantages for music reproduction, including the ability to provide better localization and envelopment, as well as reduced imaging distortion. On the other hand, multichannel audio is a demanding media type in terms of transmission requirements. Often, bandwidth limitations prohibit transmission of multiple audio channels. In such cases, an alternative is to transmit only one or two reference channels and recreate the rest of the channels at the receiving end. Here, we propose a system capable of synthesizing the required signals from a smaller set of signals recorded in a particular venue. These synthesized “virtual” microphone signals can be used to produce multichannel recordings that accurately capture the acoustics of that venue. Applications of the proposed system include transmission of multichannel audio over the current Internet infrastructure and, as an extension of the methods proposed here, remastering existing monophonic and stereophonic recordings for multichannel rendering.

  8. CERN automatic audio-conference service

    CERN Document Server

    Sierra Moral, R

    2010-01-01

    Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first Euro...

  9. EVALUASI KEPUASAN PENGGUNA TERHADAP APLIKASI AUDIO BOOKS

    Directory of Open Access Journals (Sweden)

    Raditya Maulana Anuraga

    2017-02-01

    Full Text Available Listeno is the first application audio books in Indonesia so that the users can get the book in audio form like listen to music, Listeno have problems in a feature request Listeno offline mode that have not been released, a security problem mp3 files that must be considered, and the target Listeno not yet reached 100,000 active users. This research has the objective to evaluate user satisfaction to Audio Books with research method approach, Nielsen. The analysis in this study using Importance Performance Analysis (IPA is combined with the index of User Satisfaction (IKP based on the indicators used are: Benefit (Usefulness, Utility (Utility, Usability (Usability, easy to understand (Learnability, Efficient (efficiency , Easy to remember (Memorability, Error (Error, and satisfaction (satisfaction. The results showed Applications User Satisfaction Audio books are quite satisfied with the results of the calculation IKP 69.58%..

  10. Web Audio/Video Streaming Tool

    Science.gov (United States)

    Guruvadoo, Eranna K.

    2003-01-01

    In order to promote NASA-wide educational outreach program to educate and inform the public of space exploration, NASA, at Kennedy Space Center, is seeking efficient ways to add more contents to the web by streaming audio/video files. This project proposes a high level overview of a framework for the creation, management, and scheduling of audio/video assets over the web. To support short-term goals, the prototype of a web-based tool is designed and demonstrated to automate the process of streaming audio/video files. The tool provides web-enabled users interfaces to manage video assets, create publishable schedules of video assets for streaming, and schedule the streaming events. These operations are performed on user-defined and system-derived metadata of audio/video assets stored in a relational database while the assets reside on separate repository. The prototype tool is designed using ColdFusion 5.0.

  11. Spatial audio reproduction with primary ambient extraction

    CERN Document Server

    He, JianJun

    2017-01-01

    This book first introduces the background of spatial audio reproduction, with different types of audio content and for different types of playback systems. A literature study on the classical and emerging Primary Ambient Extraction (PAE) techniques is presented. The emerging techniques aim to improve the extraction performance and also enhance the robustness of PAE approaches in dealing with more complex signals encountered in practice. The in-depth theoretical study helps readers to understand the rationales behind these approaches. Extensive objective and subjective experiments validate the feasibility of applying PAE in spatial audio reproduction systems. These experimental results, together with some representative audio examples and MATLAB codes of the key algorithms, illustrate clearly the differences among various approaches and also help readers gain insights on selecting different approaches for different applications.

  12. Audio production principles practical studio applications

    CERN Document Server

    Elmosnino, Stephane

    2018-01-01

    A new and fully practical guide to all of the key topics in audio production, this book covers the entire workflow from pre-production, to recording all kinds of instruments, to mixing theories and tools, and finally to mastering.

  13. Shallow water radio-magnetotelluric (RMT) measurements in urban environment: A case study from Stockholm city

    Science.gov (United States)

    Mehta, Suman; Bastani, Mehrdad; Malehmir, Alireza; Wang, Shunguo; Pedersen, Laust

    2014-05-01

    of the impedance tensor were obtained by the parametric representation combined with a Truncated Singular Value Decomposition (TSVD) regularization of Bastani and Pedersen (2001). The processed data were then inverted to obtain 2D resistivity models. The resulting models along 23 lines correlate well and image variation of water depth, thickness of subaqueous sediments as well as the depth to crystalline bedrock. Low resistivity zones observed in the bedrock coincide well with the low velocity zones identified in refraction seismic surveys available along the RMT lines, indicating the presence of possible fracture zones in the bedrock. The experiment illustrates that the RMT methods can be well adapted to this type of environment; it is fast and cost-effective in shallow water especially in urban settings. Acknowledgments: Formas, SGU, BeFo, SBUF, Skanska, Boliden, FQM and NGI References: Bastani, M., 2001, EnviroMT - a new Controlled Source/Radio Magnetotelluric System: Ph.D. thesis, ISBN 91-554-5051-2, Uppsala University. Bastani, M. and Pedersen, L. B., 2001, Estimation of magnetotelluric transfer functions from radio transmitters. GEOPHYSICS, 66, 1038-1051.

  14. Adaptive DCTNet for Audio Signal Classification

    OpenAIRE

    Xian, Yin; Pu, Yunchen; Gan, Zhe; Lu, Liang; Thompson, Andrew

    2016-01-01

    In this paper, we investigate DCTNet for audio signal classification. Its output feature is related to Cohen's class of time-frequency distributions. We introduce the use of adaptive DCTNet (A-DCTNet) for audio signals feature extraction. The A-DCTNet applies the idea of constant-Q transform, with its center frequencies of filterbanks geometrically spaced. The A-DCTNet is adaptive to different acoustic scales, and it can better capture low frequency acoustic information that is sensitive to h...

  15. Huffman coding in advanced audio coding standard

    Science.gov (United States)

    Brzuchalski, Grzegorz

    2012-05-01

    This article presents several hardware architectures of Advanced Audio Coding (AAC) Huffman noiseless encoder, its optimisations and working implementation. Much attention has been paid to optimise the demand of hardware resources especially memory size. The aim of design was to get as short binary stream as possible in this standard. The Huffman encoder with whole audio-video system has been implemented in FPGA devices.

  16. Audio Technology and Mobile Human Computer Interaction

    DEFF Research Database (Denmark)

    Chamberlain, Alan; Bødker, Mads; Hazzard, Adrian

    2017-01-01

    Audio-based mobile technology is opening up a range of new interactive possibilities. This paper brings some of those possibilities to light by offering a range of perspectives based in this area. It is not only the technical systems that are developing, but novel approaches to the design...... and understanding of audio-based mobile systems are evolving to offer new perspectives on interaction and design and support such systems to be applied in areas, such as the humanities....

  17. Three-dimensional magnetotelluric characterization of the Coso geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Newman, Gregory A.; Gasperikova, Erika [Lawrence Berkeley National Laboratory, Earth Sciences Division, Berkeley, CA 94720 (United States); Hoversten, G. Michael [Chevron Energy Technology Company, Seismic Analysis and Property Estimation, San Ramon, CA 94583 (United States); Wannamaker, Philip E. [Energy and Geoscience Institute, University of Utah, Salt Lake City, UT 84108 (United States)

    2008-08-15

    A dense grid of 125 magnetotelluric (MT) stations plus a single line of contiguous bipole array profiling has been acquired over the east flank of the Coso geothermal system, CA, USA. Due to production related electromagnetic (EM) noise the permanent observatory at Parkfield, CA was used as a remote reference to suppress this cultural EM noise interference. These data have been inverted to a fully three-dimensional (3D) resistivity model. This model shows the controlling geological structures possibly influencing well production at Coso and correlations with mapped surface features such as faults and the regional geoelectric strike. The 3D model also illustrates the refinement in positioning of resistivity contacts when compared to isolated 2D inversion transects. The resistivity model has also been correlated with micro-earthquake locations, reservoir fluid production intervals and most importantly with an acoustic and shear velocity model derived by Wu and Lees [Wu, H., Lees, J.M., 1999. Three-dimensional P and S wave velocity structures of the Coso Geothermal Area, California, from microseismic travel time data. J. Geophys. Res. 104 (B6), 13217-13233]. This later correlation shows that the near-vertical low-resistivity structure on the eastern flank of the producing field is also a zone of increased acoustic velocity and increased V{sub p}/V{sub s} ratio bounded by mapped fault traces. Over of the Devils' Kitchen is an area of large geothermal well density, where highly conductive near surface material is interpreted as a smectite clay cap alteration zone manifested from the subsurface geothermal fluids and related geochemistry. Enhanced resistivity beneath this cap and within the reservoir is diagnostic of propylitic alteration causing the formation of illite clays, which is typically observed in high-temperature reservoirs (>230 C). In the southwest flank of the field the V{sub p}/V{sub s} ratio is enhanced over the production intervals, but the

  18. Anisotropic magnetotelluric inversion using a mutual information constraint

    Science.gov (United States)

    Mandolesi, E.; Jones, A. G.

    2012-12-01

    In recent years, several authors pointed that the electrical conductivity of many subsurface structures cannot be described properly by a scalar field. With the development of field devices and techniques, data quality improved to the point that the anisotropy in conductivity of rocks (microscopic anisotropy) and tectonic structures (macroscopic anisotropy) cannot be neglected. Therefore a correct use of high quality data has to include electrical anisotropy and a correct interpretation of anisotropic data characterizes directly a non-negligible part of the subsurface. In this work we test an inversion routine that takes advantage of the classic Levenberg-Marquardt (LM) algorithm to invert magnetotelluric (MT) data generated from a bi-dimensional (2D) anisotropic domain. The LM method is routinely used in inverse problems due its performance and robustness. In non-linear inverse problems -such the MT problem- the LM method provides a spectacular compromise betwee quick and secure convergence at the price of the explicit computation and storage of the sensitivity matrix. Regularization in inverse MT problems has been used extensively, due to the necessity to constrain model space and to reduce the ill-posedness of the anisotropic MT problem, which makes MT inversions extremely challenging. In order to reduce non-uniqueness of the MT problem and to reach a model compatible with other different tomographic results from the same target region, we used a mutual information (MI) based constraint. MI is a basic quantity in information theory that can be used to define a metric between images, and it is routinely used in fields as computer vision, image registration and medical tomography, to cite some applications. We -thus- inverted for the model that best fits the anisotropic data and that is the closest -in a MI sense- to a tomographic model of the target area. The advantage of this technique is that the tomographic model of the studied region may be produced by any

  19. Klippen Belt, Flysch Belt and Inner Western Carpathian Paleogene Basin Relations in the Northern Slovakia by Magnetotelluric Imaging

    Czech Academy of Sciences Publication Activity Database

    Majcin, D.; Bezák, V.; Klanica, Radek; Vozár, J.; Pek, Josef; Bilčík, D.; Telecký, Josef

    (2018) ISSN 0033-4553 Institutional support: RVO:67985530 Keywords : magnetotellurics * Western Carpathians * Klippen Belt * Flysch Belt * Inner Carpathian Paleogene Subject RIV: DE - Earth Magnetism, Geodesy, Geography OBOR OECD: Physical geography Impact factor: 1.591, year: 2016

  20. Regional two-dimensional magnetotelluric profile in West Bohemia/Vogtland reveals deep conductive channel into the earthquake swarm region

    Czech Academy of Sciences Publication Activity Database

    Muňoz, G.; Weckmann, U.; Pek, Josef; Kováčiková, Světlana; Klanica, Radek

    2018-01-01

    Roč. 727, March (2018), s. 1-11 Institutional support: RVO:67985530 Keywords : magnetotellurics * West Bohemia * Fogtland * earthquake swarm * conductive channel * fluids Subject RIV: DC - Siesmology, Volcanology, Earth Structure OBOR OECD: Volcanology

  1. Could Audio-Described Films Benefit from Audio Introductions? An Audience Response Study

    Science.gov (United States)

    Romero-Fresco, Pablo; Fryer, Louise

    2013-01-01

    Introduction: Time constraints limit the quantity and type of information conveyed in audio description (AD) for films, in particular the cinematic aspects. Inspired by introductory notes for theatre AD, this study developed audio introductions (AIs) for "Slumdog Millionaire" and "Man on Wire." Each AI comprised 10 minutes of…

  2. Audio stream classification for multimedia database search

    Science.gov (United States)

    Artese, M.; Bianco, S.; Gagliardi, I.; Gasparini, F.

    2013-03-01

    Search and retrieval of huge archives of Multimedia data is a challenging task. A classification step is often used to reduce the number of entries on which to perform the subsequent search. In particular, when new entries of the database are continuously added, a fast classification based on simple threshold evaluation is desirable. In this work we present a CART-based (Classification And Regression Tree [1]) classification framework for audio streams belonging to multimedia databases. The database considered is the Archive of Ethnography and Social History (AESS) [2], which is mainly composed of popular songs and other audio records describing the popular traditions handed down generation by generation, such as traditional fairs, and customs. The peculiarities of this database are that it is continuously updated; the audio recordings are acquired in unconstrained environment; and for the non-expert human user is difficult to create the ground truth labels. In our experiments, half of all the available audio files have been randomly extracted and used as training set. The remaining ones have been used as test set. The classifier has been trained to distinguish among three different classes: speech, music, and song. All the audio files in the dataset have been previously manually labeled into the three classes above defined by domain experts.

  3. Modified DCTNet for audio signals classification

    Science.gov (United States)

    Xian, Yin; Pu, Yunchen; Gan, Zhe; Lu, Liang; Thompson, Andrew

    2016-10-01

    In this paper, we investigate DCTNet for audio signal classification. Its output feature is related to Cohen's class of time-frequency distributions. We introduce the use of adaptive DCTNet (A-DCTNet) for audio signals feature extraction. The A-DCTNet applies the idea of constant-Q transform, with its center frequencies of filterbanks geometrically spaced. The A-DCTNet is adaptive to different acoustic scales, and it can better capture low frequency acoustic information that is sensitive to human audio perception than features such as Mel-frequency spectral coefficients (MFSC). We use features extracted by the A-DCTNet as input for classifiers. Experimental results show that the A-DCTNet and Recurrent Neural Networks (RNN) achieve state-of-the-art performance in bird song classification rate, and improve artist identification accuracy in music data. They demonstrate A-DCTNet's applicability to signal processing problems.

  4. Fall Detection Using Smartphone Audio Features.

    Science.gov (United States)

    Cheffena, Michael

    2016-07-01

    An automated fall detection system based on smartphone audio features is developed. The spectrogram, mel frequency cepstral coefficents (MFCCs), linear predictive coding (LPC), and matching pursuit (MP) features of different fall and no-fall sound events are extracted from experimental data. Based on the extracted audio features, four different machine learning classifiers: k-nearest neighbor classifier (k-NN), support vector machine (SVM), least squares method (LSM), and artificial neural network (ANN) are investigated for distinguishing between fall and no-fall events. For each audio feature, the performance of each classifier in terms of sensitivity, specificity, accuracy, and computational complexity is evaluated. The best performance is achieved using spectrogram features with ANN classifier with sensitivity, specificity, and accuracy all above 98%. The classifier also has acceptable computational requirement for training and testing. The system is applicable in home environments where the phone is placed in the vicinity of the user.

  5. Audio Description as a Pedagogical Tool

    Directory of Open Access Journals (Sweden)

    Georgina Kleege

    2015-05-01

    Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

  6. Research on maximum level noise contaminated of remote reference magnetotelluric measurements using synthesized data

    Science.gov (United States)

    Gang, Zhang; Fansong, Meng; Jianzhong, Wang; Mingtao, Ding

    2018-02-01

    Determining magnetotelluric impedance precisely and accurately is fundamental to valid inversion and geological interpretation. This study aims to determine the minimum value of signal-to-noise ratio (SNR) which maintains the effectiveness of remote reference technique. Results of standard time series simulation, addition of different Gaussian noises to obtain the different SNR time series, and analysis of the intermediate data, such as polarization direction, correlation coefficient, and impedance tensor, show that when the SNR value is larger than 23.5743, the polarization direction disorder at morphology and a smooth and accurate sounding carve value can be obtained. At this condition, the correlation coefficient value of nearly complete segments between the base and remote station is larger than 0.9, and impedance tensor Zxy presents only one aggregation, which meet the natural magnetotelluric signal characteristic.

  7. Frequency Hopping Method for Audio Watermarking

    Directory of Open Access Journals (Sweden)

    A. Anastasijević

    2012-11-01

    Full Text Available This paper evaluates the degradation of audio content for a perceptible removable watermark. Two different approaches to embedding the watermark in the spectral domain were investigated. The frequencies for watermark embedding are chosen according to a pseudorandom sequence making the methods robust. Consequentially, the lower quality audio can be used for promotional purposes. For a fee, the watermark can be removed with a secret watermarking key. Objective and subjective testing was conducted in order to measure degradation level for the watermarked music samples and to examine residual distortion for different parameters of the watermarking algorithm and different music genres.

  8. Nonlinear dynamic macromodeling techniques for audio systems

    Science.gov (United States)

    Ogrodzki, Jan; Bieńkowski, Piotr

    2015-09-01

    This paper develops a modelling method and a models identification technique for the nonlinear dynamic audio systems. Identification is performed by means of a behavioral approach based on a polynomial approximation. This approach makes use of Discrete Fourier Transform and Harmonic Balance Method. A model of an audio system is first created and identified and then it is simulated in real time using an algorithm of low computational complexity. The algorithm consists in real time emulation of the system response rather than in simulation of the system itself. The proposed software is written in Python language using object oriented programming techniques. The code is optimized for a multithreads environment.

  9. Personalized Audio Systems - a Bayesian Approach

    DEFF Research Database (Denmark)

    Nielsen, Jens Brehm; Jensen, Bjørn Sand; Hansen, Toke Jansen

    2013-01-01

    Modern audio systems are typically equipped with several user-adjustable parameters unfamiliar to most users listening to the system. To obtain the best possible setting, the user is forced into multi-parameter optimization with respect to the users's own objective and preference. To address this......, the present paper presents a general inter-active framework for personalization of such audio systems. The framework builds on Bayesian Gaussian process regression in which a model of the users's objective function is updated sequentially. The parameter setting to be evaluated in a given trial is selected...

  10. Self-potential, geoelectric and magnetotelluric studies in Italian active volcanic areas

    OpenAIRE

    Di Mai, R.; Mauriello, P.; Patella, D.; Petrillo, Z.; Piscitelli, S.; Siniscalchi, A.; Veneruso, M.

    1997-01-01

    We present the results of self-potential, geoelectric and magnetotelluric studies in Italian active volcanic areas as essential contributions both to structural modeling and to hazard evaluation. On Mt. Etna and Mt. Somma-Vesuvius complexes structural modeling was emphasized due to a lack of global information involving the whole apparatuses, at least from the electrical point of view. Hazard investigation was, instead, investigated with high resolution techniques on the island of Vulcano, wh...

  11. A regional strategy for geothermal exploration with emphasis on gravity and magnetotellurics

    International Nuclear Information System (INIS)

    Aiken, C.L.V.; Ander, M.E.; Los Alamos Scientific Lab., NM

    1981-01-01

    Part of the resource evaluationProgram conducted by Los Alamos Scientific Laboratory for the national Hot Dry Rock (HDR) Geothermal Program, a regional magnetotelluric (MT) survey of New Mexico and Arizona is being performed. The MT lines are being located in areas where the results of anaylsis of residual gravity anomaly maps of Arizona and New Mexico, integrated with other geologic and geophysical studies indicate the greatest potential for HDR resources. (orig./ME)

  12. Central Italy magnetotelluric investigation. Structures and relations to seismic events: analysis of initial data

    Directory of Open Access Journals (Sweden)

    J. Marianiuk

    1996-06-01

    Full Text Available A scientific collaboration between the Warsaw Academy of Science, (Poland and the National Institute of Geophysics (Italy, gave rise to the installation of few stations for the long term measurement of magnetotelluric fields in central Italy. The selection of investigation sites was determined by the individual seismic interest of each location. The project began in the summer of 1991, with the installation of 2 magnetotelluric stations in the province of Isernia, (Collemeluccio and Montedimezzo. In 1992, 2 more stations became operative, one in the province of Rieti, (Fassinoro, the other in the province of L'Aquila, (S. Vittoria. For the purpose of this project, the magnetic observatory in L'Aquila was also equipped with electric lines, for the measurement of the telluric field. The aim of the analysis here presented, is to show that is possible to follow the temporal evolution of magnetotelluric characteristic parameters. At Collemeluccio this evolution was compared with the seismic released energy for events recorded within the study area.

  13. Three-dimensional magnetotelluric imaging of the 1997 Kagoshima earthquake doublet, Southwest Japan

    Science.gov (United States)

    Asamori, K.; Makuuchi, A.; Umeda, K.

    2013-12-01

    The 1997 Kagoshima earthquake doublet struck on unrecognized active faults lacking clear surface expression where very few large earthquakes have occurred. Two shallow moderate earthquakes occurred in the northwestern part of Kagoshima province, on March 26 (Mw 6.1) and May 13 (Mw 6.0) in 1997, both followed by intensive aftershock sequences. Aftershock distribution of the 1997 earthquake doublet reflects complicated rupture process attributed to the geological (rheological) conditions and coupling of hydraulic pressure as well as tectonic shear stress. For advanced understanding of dynamic interactions between fluids and faulting, it is imperative to obtain three-dimensional (3-D) images of the electrical resistivity structure around the seismogenic faults. In this study, we conduct magnetotelluric (MT) soundings in and around the source region of the 1997 Kagoshima earthquake sequence and perform a 3-D inversion of wideband MT data above a depth of 30 km. MT stations were deployed around the aftershock area of the 1997 Kagoshima earthquake. All of 42 MT sites were set up in the land area. The data were collected using five component (three magnetic and two telluric components) wide-band MT instruments (Phoenix MTU-5 system) in February, 2013. The data were acquired in the frequency range from 0.000343 to 320 Hz. The recording duration ranged from 2 to 8 days. As the cultural noises severely affect the measurements, the time series analysis focused on the nocturnal data when there were fewer noise. A simultaneous remote reference measurement was carried out at the Sawauchi site (1300 km northeast of the study area). Using the remote reference technique (Gamble et al., 1979), we were able to reduce the unfavorable cultural noises. The observed apparent resistivity and phase data were inverted simultaneously using the 3-D inversion code of Sasaki (2004). In this inversion, the 3-D blocks were set up in the crust and upper mantle. These block size in the horizontal

  14. Audio wiring guide how to wire the most popular audio and video connectors

    CERN Document Server

    Hechtman, John

    2012-01-01

    Whether you're a pro or an amateur, a musician or into multimedia, you can't afford to guess about audio wiring. The Audio Wiring Guide is a comprehensive, easy-to-use guide that explains exactly what you need to know. No matter the size of your wiring project or installation, this handy tool provides you with the essential information you need and the techniques to use it. Using The Audio Wiring Guide is like having an expert at your side. By following the clear, step-by-step directions, you can do professional-level work at a fraction of the cost.

  15. Nonspeech audio in user interfaces for TV

    NARCIS (Netherlands)

    Sluis, van de Richard; Eggen, J.H.; Rypkema, J.A.

    1997-01-01

    This study explores the end-user benefits of using nonspeech audio in television user interfaces. A prototype of an Electronic Programme Guide (EPG) served as a carrier for the research. One of the features of this EPG is the possibility to search for TV programmes in a category-based way. The EPG

  16. CERN automatic audio-conference service

    International Nuclear Information System (INIS)

    Sierra Moral, Rodrigo

    2010-01-01

    Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

  17. CERN automatic audio-conference service

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Moral, Rodrigo, E-mail: Rodrigo.Sierra@cern.c [CERN, IT Department 1211 Geneva-23 (Switzerland)

    2010-04-01

    Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

  18. CERN automatic audio-conference service

    Science.gov (United States)

    Sierra Moral, Rodrigo

    2010-04-01

    Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.

  19. Audio Journal in an ELT Context

    Directory of Open Access Journals (Sweden)

    Neşe Aysin Siyli

    2012-09-01

    Full Text Available It is widely acknowledged that one of the most serious problems students of English as a foreign language face is their deprivation of practicing the language outside the classroom. Generally, the classroom is the sole environment where they can practice English, which by its nature does not provide rich setting to help students develop their competence by putting the language into practice. Motivated by this need, this descriptive study investigated the impact of audio dialog journals on students’ speaking skills. It also aimed to gain insights into students’ and teacher’s opinions on keeping audio dialog journals outside the class. The data of the study developed from student and teacher audio dialog journals, student written feedbacks, interviews held with the students, and teacher observations. The descriptive analysis of the data revealed that audio dialog journals served a number of functions ranging from cognitive to linguistic, from pedagogical to psychological, and social. The findings and pedagogical implications of the study are discussed in detail.

  20. Spatial audio quality perception (part 2)

    DEFF Research Database (Denmark)

    Conetta, R.; Brookes, T.; Rumsey, F.

    2015-01-01

    location, envelopment, coverage angle, ensemble width, and spaciousness. They can also impact timbre, and changes to timbre can then influence spatial perception. Previously obtained data was used to build a regression model of perceived spatial audio quality in terms of spatial and timbral metrics...

  1. Study of audio speakers containing ferrofluid

    Energy Technology Data Exchange (ETDEWEB)

    Rosensweig, R E [34 Gloucester Road, Summit, NJ 07901 (United States); Hirota, Y; Tsuda, S [Ferrotec, 1-4-14 Kyobashi, chuo-Ku, Tokyo 104-0031 (Japan); Raj, K [Ferrotec, 33 Constitution Drive, Bedford, NH 03110 (United States)

    2008-05-21

    This work validates a method for increasing the radial restoring force on the voice coil in audio speakers containing ferrofluid. In addition, a study is made of factors influencing splash loss of the ferrofluid due to shock. Ferrohydrodynamic analysis is employed throughout to model behavior, and predictions are compared to experimental data.

  2. An ESL Audio-Script Writing Workshop

    Science.gov (United States)

    Miller, Carla

    2012-01-01

    The roles of dialogue, collaborative writing, and authentic communication have been explored as effective strategies in second language writing classrooms. In this article, the stages of an innovative, multi-skill writing method, which embeds students' personal voices into the writing process, are explored. A 10-step ESL Audio Script Writing Model…

  3. Audible Aliasing Distortion in Digital Audio Synthesis

    Directory of Open Access Journals (Sweden)

    J. Schimmel

    2012-04-01

    Full Text Available This paper deals with aliasing distortion in digital audio signal synthesis of classic periodic waveforms with infinite Fourier series, for electronic musical instruments. When these waveforms are generated in the digital domain then the aliasing appears due to its unlimited bandwidth. There are several techniques for the synthesis of these signals that have been designed to avoid or reduce the aliasing distortion. However, these techniques have high computing demands. One can say that today's computers have enough computing power to use these methods. However, we have to realize that today’s computer-aided music production requires tens of multi-timbre voices generated simultaneously by software synthesizers and the most of the computing power must be reserved for hard-disc recording subsystem and real-time audio processing of many audio channels with a lot of audio effects. Trivially generated classic analog synthesizer waveforms are therefore still effective for sound synthesis. We cannot avoid the aliasing distortion but spectral components produced by the aliasing can be masked with harmonic components and thus made inaudible if sufficient oversampling ratio is used. This paper deals with the assessment of audible aliasing distortion with the help of a psychoacoustic model of simultaneous masking and compares the computing demands of trivial generation using oversampling with those of other methods.

  4. Agency Video, Audio and Imagery Library

    Science.gov (United States)

    Grubbs, Rodney

    2015-01-01

    The purpose of this presentation was to inform the ISS International Partners of the new NASA Agency Video, Audio and Imagery Library (AVAIL) website. AVAIL is a new resource for the public to search for and download NASA-related imagery, and is not intended to replace the current process by which the International Partners receive their Space Station imagery products.

  5. Magnetotelluric investigation of the Toender area, Denmark. ALTKUL project report part 2

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, T.M.; Thorning, L. [GEUS, Copenhagen (Denmark); Pedersen, L.B.; Shan, C. [Uppsala Univ., Dept. of Earth Sciences, Uppsala (Sweden)

    2012-10-15

    Project ALTKUL was commissioned by DONG E and P A/S and Nordsoefonden; the Danish Energy Agency followed the project closely. The first part of the study has been reported in Rasmussen and Thorning (2012).The starting point of the study was a need for more knowledge on methods that could be used for hydrocarbon exploration in Danish onshore areas, as an alternative to seismic investigations, when these cannot be used for nature protecting reasons. DONG E and P A/S and Nordsoefonden approached GEUS, suggesting a study of seven different non-seismic methods. The Danish Energy Agency was interested in the subject and requested that an actual test of a method be carried out as a part of the project. The optimum choice for a field test was an electromagnetic experiment with a galvanic controlled source (Rasmussen and Thorning, 2012). However, due to organisational issues and a limited timeframe of the project, the final choice of method for the field test was settled on using the magnetotelluric method (MT). Though MT does not utilise galvanic controlled sources, and hence does not serve as a tool for direct hydrocarbon exploration, MT has been used in the past in relation with hydrocarbon exploration onshore and has recently gained considerable interest in China. A contract was entered with Uppsala University for some initial tests of the magnetotelluric (MT) method. The test was carried out August 2012 in an area around Toender, and is reported here as ALTKUL Project Report Part 2. In total 42 MT stations were measured in a 180 km{sup 2} area. The digital data are enclosed with the report and hereby released to the public. A 3D model of the electrical resistivity variations to a depth of 6 km constitutes, together with the actual measured data, the main results of part 2 of the ALTKUL project. The 3D model was derived from an unconstrained 3D inversion of the MT data. The MT data show that pronounced lateral resistivity variations exist at the depth of interest for

  6. Extracting meaning from audio signals - a machine learning approach

    DEFF Research Database (Denmark)

    Larsen, Jan

    2007-01-01

    * Machine learning framework for sound search * Genre classification * Music and audio separation * Wind noise suppression......* Machine learning framework for sound search * Genre classification * Music and audio separation * Wind noise suppression...

  7. Consequence of audio visual collection in school libraries

    OpenAIRE

    Kuri, Ramesh

    2016-01-01

    The collection of Audio-Visual in library plays important role in teaching and learning. The importance of audio visual (AV) technology in education should not be underestimated. If audio-visual collection in library is carefully planned and designed, it can provide a rich learning environment. In this article, an author discussed the consequences of Audio-Visual collection in libraries especially for students of school library

  8. 47 CFR 10.520 - Common audio attention signal.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Common audio attention signal. 10.520 Section... Equipment Requirements § 10.520 Common audio attention signal. A Participating CMS Provider and equipment manufacturers may only market devices for public use under part 10 that include an audio attention signal that...

  9. Fusion of audio and visual cues for laughter detection

    NARCIS (Netherlands)

    Petridis, Stavros; Pantic, Maja

    Past research on automatic laughter detection has focused mainly on audio-based detection. Here we present an audio- visual approach to distinguishing laughter from speech and we show that integrating the information from audio and video channels leads to improved performance over single-modal

  10. Comparative evaluation of audio and audio - tactile methods to improve oral hygiene status of visually impaired school children

    OpenAIRE

    R Krishnakumar; Swarna Swathi Silla; Sugumaran K Durai; Mohan Govindarajan; Syed Shaheed Ahamed; Logeshwari Mathivanan

    2016-01-01

    Background: Visually impaired children are unable to maintain good oral hygiene, as their tactile abilities are often underdeveloped owing to their visual disturbances. Conventional brushing techniques are often poorly comprehended by these children and hence, it was decided to evaluate the effectiveness of audio and audio-tactile methods in improving the oral hygiene of these children. Objective: To evaluate and compare the effectiveness of audio and audio-tactile methods in improving oral h...

  11. Enhancement of subsurface geologic structure model based on gravity, magnetotelluric, and well log data in Kamojang geothermal field

    Science.gov (United States)

    Yustin Kamah, Muhammad; Armando, Adilla; Larasati Rahmani, Dinda; Paramitha, Shabrina

    2017-12-01

    Geophysical methods such as gravity and magnetotelluric methods commonly used in conventional and unconventional energy exploration, notably for exploring geothermal prospect. They used to identify the subsurface geology structures which is estimated as a path of fluid flow. This study was conducted in Kamojang Geothermal Field with the aim of highlighting the volcanic lineament in West Java, precisely in Guntur-Papandayan chain where there are three geothermal systems. Kendang Fault has predominant direction NE-SW, identified by magnetotelluric techniques and gravity data processing techniques. Gravity techniques such as spectral analysis, derivative solutions, and Euler deconvolution indicate the type and geometry of anomaly. Magnetotelluric techniques such as inverse modeling and polar diagram are required to know subsurface resistivity charactersitics and major orientation. Furthermore, the result from those methods will be compared to geology information and some section of well data, which is sufficiently suitable. This research is very useful to trace out another potential development area.

  12. Anthropomorphic Coding of Speech and Audio: A Model Inversion Approach

    Directory of Open Access Journals (Sweden)

    W. Bastiaan Kleijn

    2005-06-01

    Full Text Available Auditory modeling is a well-established methodology that provides insight into human perception and that facilitates the extraction of signal features that are most relevant to the listener. The aim of this paper is to provide a tutorial on perceptual speech and audio coding using an invertible auditory model. In this approach, the audio signal is converted into an auditory representation using an invertible auditory model. The auditory representation is quantized and coded. Upon decoding, it is then transformed back into the acoustic domain. This transformation converts a complex distortion criterion into a simple one, thus facilitating quantization with low complexity. We briefly review past work on auditory models and describe in more detail the components of our invertible model and its inversion procedure, that is, the method to reconstruct the signal from the output of the auditory model. We summarize attempts to use the auditory representation for low-bit-rate coding. Our approach also allows the exploitation of the inherent redundancy of the human auditory system for the purpose of multiple description (joint source-channel coding.

  13. Extraction of Information of Audio-Visual Contents

    Directory of Open Access Journals (Sweden)

    Carlos Aguilar

    2011-10-01

    Full Text Available In this article we show how it is possible to use Channel Theory (Barwise and Seligman, 1997 for modeling the process of information extraction realized by audiences of audio-visual contents. To do this, we rely on the concepts pro- posed by Channel Theory and, especially, its treatment of representational systems. We then show how the information that an agent is capable of extracting from the content depends on the number of channels he is able to establish between the content and the set of classifications he is able to discriminate. The agent can endeavor the extraction of information through these channels from the totality of content; however, we discuss the advantages of extracting from its constituents in order to obtain a greater number of informational items that represent it. After showing how the extraction process is endeavored for each channel, we propose a method of representation of all the informative values an agent can obtain from a content using a matrix constituted by the channels the agent is able to establish on the content (source classifications, and the ones he can understand as individual (destination classifications. We finally show how this representation allows reflecting the evolution of the informative items through the evolution of audio-visual content.

  14. Audio-tactile integration and the influence of musical training.

    Directory of Open Access Journals (Sweden)

    Anja Kuchenbuch

    Full Text Available Perception of our environment is a multisensory experience; information from different sensory systems like the auditory, visual and tactile is constantly integrated. Complex tasks that require high temporal and spatial precision of multisensory integration put strong demands on the underlying networks but it is largely unknown how task experience shapes multisensory processing. Long-term musical training is an excellent model for brain plasticity because it shapes the human brain at functional and structural levels, affecting a network of brain areas. In the present study we used magnetoencephalography (MEG to investigate how audio-tactile perception is integrated in the human brain and if musicians show enhancement of the corresponding activation compared to non-musicians. Using a paradigm that allowed the investigation of combined and separate auditory and tactile processing, we found a multisensory incongruency response, generated in frontal, cingulate and cerebellar regions, an auditory mismatch response generated mainly in the auditory cortex and a tactile mismatch response generated in frontal and cerebellar regions. The influence of musical training was seen in the audio-tactile as well as in the auditory condition, indicating enhanced higher-order processing in musicians, while the sources of the tactile MMN were not influenced by long-term musical training. Consistent with the predictive coding model, more basic, bottom-up sensory processing was relatively stable and less affected by expertise, whereas areas for top-down models of multisensory expectancies were modulated by training.

  15. Audio-tactile integration and the influence of musical training.

    Science.gov (United States)

    Kuchenbuch, Anja; Paraskevopoulos, Evangelos; Herholz, Sibylle C; Pantev, Christo

    2014-01-01

    Perception of our environment is a multisensory experience; information from different sensory systems like the auditory, visual and tactile is constantly integrated. Complex tasks that require high temporal and spatial precision of multisensory integration put strong demands on the underlying networks but it is largely unknown how task experience shapes multisensory processing. Long-term musical training is an excellent model for brain plasticity because it shapes the human brain at functional and structural levels, affecting a network of brain areas. In the present study we used magnetoencephalography (MEG) to investigate how audio-tactile perception is integrated in the human brain and if musicians show enhancement of the corresponding activation compared to non-musicians. Using a paradigm that allowed the investigation of combined and separate auditory and tactile processing, we found a multisensory incongruency response, generated in frontal, cingulate and cerebellar regions, an auditory mismatch response generated mainly in the auditory cortex and a tactile mismatch response generated in frontal and cerebellar regions. The influence of musical training was seen in the audio-tactile as well as in the auditory condition, indicating enhanced higher-order processing in musicians, while the sources of the tactile MMN were not influenced by long-term musical training. Consistent with the predictive coding model, more basic, bottom-up sensory processing was relatively stable and less affected by expertise, whereas areas for top-down models of multisensory expectancies were modulated by training.

  16. Speech and audio processing for coding, enhancement and recognition

    CERN Document Server

    Togneri, Roberto; Narasimha, Madihally

    2015-01-01

    This book describes the basic principles underlying the generation, coding, transmission and enhancement of speech and audio signals, including advanced statistical and machine learning techniques for speech and speaker recognition with an overview of the key innovations in these areas. Key research undertaken in speech coding, speech enhancement, speech recognition, emotion recognition and speaker diarization are also presented, along with recent advances and new paradigms in these areas. ·         Offers readers a single-source reference on the significant applications of speech and audio processing to speech coding, speech enhancement and speech/speaker recognition. Enables readers involved in algorithm development and implementation issues for speech coding to understand the historical development and future challenges in speech coding research; ·         Discusses speech coding methods yielding bit-streams that are multi-rate and scalable for Voice-over-IP (VoIP) Networks; ·     �...

  17. Audio feature extraction using probability distribution function

    Science.gov (United States)

    Suhaib, A.; Wan, Khairunizam; Aziz, Azri A.; Hazry, D.; Razlan, Zuradzman M.; Shahriman A., B.

    2015-05-01

    Voice recognition has been one of the popular applications in robotic field. It is also known to be recently used for biometric and multimedia information retrieval system. This technology is attained from successive research on audio feature extraction analysis. Probability Distribution Function (PDF) is a statistical method which is usually used as one of the processes in complex feature extraction methods such as GMM and PCA. In this paper, a new method for audio feature extraction is proposed which is by using only PDF as a feature extraction method itself for speech analysis purpose. Certain pre-processing techniques are performed in prior to the proposed feature extraction method. Subsequently, the PDF result values for each frame of sampled voice signals obtained from certain numbers of individuals are plotted. From the experimental results obtained, it can be seen visually from the plotted data that each individuals' voice has comparable PDF values and shapes.

  18. Geophysical constraints on Rio Grande rift structure and stratigraphy from magnetotelluric models and borehole resistivity logs, northern New Mexico

    Science.gov (United States)

    Rodriguez, Brian D.; Sawyer, David A.; Hudson, Mark R.; Grauch, V.J.S.

    2013-01-01

    Two- and three-dimensional electrical resistivity models derived from the magnetotelluric method were interpreted to provide more accurate hydrogeologic parameters for the Albuquerque and Española Basins. Analysis and interpretation of the resistivity models are aided by regional borehole resistivity data. Examination of the magnetotelluric response of hypothetical stratigraphic cases using resistivity characterizations from the borehole data elucidates two scenarios where the magnetotelluric method provides the strongest constraints. In the first scenario, the magnetotelluric method constrains the thickness of extensive volcanic cover, the underlying thickness of coarser-grained facies of buried Santa Fe Group sediments, and the depth to Precambrian basement or overlying Pennsylvanian limestones. In the second scenario, in the absence of volcanic cover, the magnetotelluric method constrains the thickness of coarser-grained facies of buried Santa Fe Group sediments and the depth to Precambrian basement or overlying Pennsylvanian limestones. Magnetotelluric surveys provide additional constraints on the relative positions of basement rocks and the thicknesses of Paleozoic, Mesozoic, and Tertiary sedimentary rocks in the region of the Albuquerque and Española Basins. The northern extent of a basement high beneath the Cerros del Rio volcanic field is delineated. Our results also reveal that the largest offset of the Hubbell Spring fault zone is located 5 km west of the exposed scarp. By correlating our resistivity models with surface geology and the deeper stratigraphic horizons using deep well log data, we are able to identify which of the resistivity variations in the upper 2 km belong to the upper Santa Fe Group sediment

  19. New musical organology : the audio-games

    OpenAIRE

    Zénouda , Hervé

    2012-01-01

    International audience; This article aims to shed light on a new and emerging creative field: " Audio Games, " a crossroad between video games and computer music. Today, a plethora of tiny applications, which propose entertaining audiovisual experiences with a preponderant sound dimension, are available for game consoles, computers, and mobile phones. These experiences represent a new universe where the gameplay of video games is applied to musical composition, hence creating new links betwee...

  20. Digitisation of the CERN Audio Archives

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    Since the creation of CERN in 1954 until mid 1980s, the audiovisual service has recorded hundreds of hours of moments of life at CERN on audio tapes. These moments range from inaugurations of new facilities to VIP speeches and general interest cultural seminars The preservation process started in June 2005 On these pictures, we see Waltraud Hug working on an open-reel tape.

  1. Securing Digital Audio using Complex Quadratic Map

    Science.gov (United States)

    Suryadi, MT; Satria Gunawan, Tjandra; Satria, Yudi

    2018-03-01

    In This digital era, exchanging data are common and easy to do, therefore it is vulnerable to be attacked and manipulated from unauthorized parties. One data type that is vulnerable to attack is digital audio. So, we need data securing method that is not vulnerable and fast. One of the methods that match all of those criteria is securing the data using chaos function. Chaos function that is used in this research is complex quadratic map (CQM). There are some parameter value that causing the key stream that is generated by CQM function to pass all 15 NIST test, this means that the key stream that is generated using this CQM is proven to be random. In addition, samples of encrypted digital sound when tested using goodness of fit test are proven to be uniform, so securing digital audio using this method is not vulnerable to frequency analysis attack. The key space is very huge about 8.1×l031 possible keys and the key sensitivity is very small about 10-10, therefore this method is also not vulnerable against brute-force attack. And finally, the processing speed for both encryption and decryption process on average about 450 times faster that its digital audio duration.

  2. Detection Of Alterations In Audio Files Using Spectrograph Analysis

    Directory of Open Access Journals (Sweden)

    Anandha Krishnan G

    2015-08-01

    Full Text Available The corresponding study was carried out to detect changes in audio file using spectrograph. An audio file format is a file format for storing digital audio data on a computer system. A sound spectrograph is a laboratory instrument that displays a graphical representation of the strengths of the various component frequencies of a sound as time passes. The objectives of the study were to find the changes in spectrograph of audio after altering them to compare altering changes with spectrograph of original files and to check for similarity and difference in mp3 and wav. Five different alterations were carried out on each audio file to analyze the differences between the original and the altered file. For altering the audio file MP3 or WAV by cutcopy the file was opened in Audacity. A different audio was then pasted to the audio file. This new file was analyzed to view the differences. By adjusting the necessary parameters the noise was reduced. The differences between the new file and the original file were analyzed. By adjusting the parameters from the dialog box the necessary changes were made. The edited audio file was opened in the software named spek where after analyzing a graph is obtained of that particular file which is saved for further analysis. The original audio graph received was combined with the edited audio file graph to see the alterations.

  3. AudioMUD: a multiuser virtual environment for blind people.

    Science.gov (United States)

    Sánchez, Jaime; Hassler, Tiago

    2007-03-01

    A number of virtual environments have been developed during the last years. Among them there are some applications for blind people based on different type of audio, from simple sounds to 3-D audio. In this study, we pursued a different approach. We designed AudioMUD by using spoken text to describe the environment, navigation, and interaction. We have also introduced some collaborative features into the interaction between blind users. The core of a multiuser MUD game is a networked textual virtual environment. We developed AudioMUD by adding some collaborative features to the basic idea of a MUD and placed a simulated virtual environment inside the human body. This paper presents the design and usability evaluation of AudioMUD. Blind learners were motivated when interacted with AudioMUD and helped to improve the interaction through audio and interface design elements.

  4. Self-potential, geoelectric and magnetotelluric studies in Italian active volcanic areas

    Directory of Open Access Journals (Sweden)

    A. Siniscalchi

    1997-06-01

    Full Text Available We present the results of self-potential, geoelectric and magnetotelluric studies in Italian active volcanic areas as essential contributions both to structural modeling and to hazard evaluation. On Mt. Etna and Mt. Somma-Vesuvius complexes structural modeling was emphasized due to a lack of global information involving the whole apparatuses, at least from the electrical point of view. Hazard investigation was, instead, investigated with high resolution techniques on the island of Vulcano, where intense unrest phenomena have long been recorded.

  5. Car audio using DSP for active sound control. DSP ni yoru active seigyo wo mochiita audio

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, K.; Asano, S.; Furukawa, N. (Mitsubishi Motor Corp., Tokyo (Japan))

    1993-06-01

    In the automobile cabin, there are some unique problems which spoil the quality of sound reproduction from audio equipment, such as the narrow space and/or the background noise. The audio signal processing by using DSP (digital signal processor) makes enable a solution to these problems. A car audio with a high amenity has been successfully made by the active sound control using DSP. The DSP consists of an adder, coefficient multiplier, delay unit, and connections. For the actual processing by DSP, are used functions, such as sound field correction, response and processing of noises during driving, surround reproduction, graphic equalizer processing, etc. High effectiveness of the method was confirmed through the actual driving evaluation test. The present paper describes the actual method of sound control technology using DSP. Especially, the dynamic processing of the noise during driving is discussed in detail. 1 ref., 12 figs., 1 tab.

  6. Elicitation of attributes for the evaluation of audio-on audio-interference

    DEFF Research Database (Denmark)

    Francombe, Jon; Mason, R.; Dewhirst, M.

    2014-01-01

    procedure was used to reduce these phrases into a comprehensive set of attributes. Groups of experienced and inexperienced listeners determined nine and eight attributes, respectively. These attribute sets were combined by the listeners to produce a final set of 12 attributes: masking, calming, distraction......An experiment to determine the perceptual attributes of the experience of listening to a target audio program in the presence of an audio interferer was performed. The first stage was a free elicitation task in which a total of 572 phrases were produced. In the second stage, a consensus vocabulary...

  7. AudioPairBank: Towards A Large-Scale Tag-Pair-Based Audio Content Analysis

    OpenAIRE

    Sager, Sebastian; Elizalde, Benjamin; Borth, Damian; Schulze, Christian; Raj, Bhiksha; Lane, Ian

    2016-01-01

    Recently, sound recognition has been used to identify sounds, such as car and river. However, sounds have nuances that may be better described by adjective-noun pairs such as slow car, and verb-noun pairs such as flying insects, which are under explored. Therefore, in this work we investigate the relation between audio content and both adjective-noun pairs and verb-noun pairs. Due to the lack of datasets with these kinds of annotations, we collected and processed the AudioPairBank corpus cons...

  8. [Intermodal timing cues for audio-visual speech recognition].

    Science.gov (United States)

    Hashimoto, Masahiro; Kumashiro, Masaharu

    2004-06-01

    The purpose of this study was to investigate the limitations of lip-reading advantages for Japanese young adults by desynchronizing visual and auditory information in speech. In the experiment, audio-visual speech stimuli were presented under the six test conditions: audio-alone, and audio-visually with either 0, 60, 120, 240 or 480 ms of audio delay. The stimuli were the video recordings of a face of a female Japanese speaking long and short Japanese sentences. The intelligibility of the audio-visual stimuli was measured as a function of audio delays in sixteen untrained young subjects. Speech intelligibility under the audio-delay condition of less than 120 ms was significantly better than that under the audio-alone condition. On the other hand, the delay of 120 ms corresponded to the mean mora duration measured for the audio stimuli. The results implied that audio delays of up to 120 ms would not disrupt lip-reading advantage, because visual and auditory information in speech seemed to be integrated on a syllabic time scale. Potential applications of this research include noisy workplace in which a worker must extract relevant speech from all the other competing noises.

  9. Predicting the Overall Spatial Quality of Automotive Audio Systems

    Science.gov (United States)

    Koya, Daisuke

    The spatial quality of automotive audio systems is often compromised due to their unideal listening environments. Automotive audio systems need to be developed quickly due to industry demands. A suitable perceptual model could evaluate the spatial quality of automotive audio systems with similar reliability to formal listening tests but take less time. Such a model is developed in this research project by adapting an existing model of spatial quality for automotive audio use. The requirements for the adaptation were investigated in a literature review. A perceptual model called QESTRAL was reviewed, which predicts the overall spatial quality of domestic multichannel audio systems. It was determined that automotive audio systems are likely to be impaired in terms of the spatial attributes that were not considered in developing the QESTRAL model, but metrics are available that might predict these attributes. To establish whether the QESTRAL model in its current form can accurately predict the overall spatial quality of automotive audio systems, MUSHRA listening tests using headphone auralisation with head tracking were conducted to collect results to be compared against predictions by the model. Based on guideline criteria, the model in its current form could not accurately predict the overall spatial quality of automotive audio systems. To improve prediction performance, the QESTRAL model was recalibrated and modified using existing metrics of the model, those that were proposed from the literature review, and newly developed metrics. The most important metrics for predicting the overall spatial quality of automotive audio systems included those that were interaural cross-correlation (IACC) based, relate to localisation of the frontal audio scene, and account for the perceived scene width in front of the listener. Modifying the model for automotive audio systems did not invalidate its use for domestic audio systems. The resulting model predicts the overall spatial

  10. Magnetotelluric data collected near geophysically logged boreholes in the Espa?ola and Middle Rio Grande basins, New Mexico

    Science.gov (United States)

    Williams, Jackie M.; Rodriguez, Brian D.

    2006-01-01

    The Santa Fe region is growing rapidly. The Santa Fe Group aquifer in the Espa?ola Basin is the main source of municipal water for the region, and water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's ground-water resources. An important issue in managing the ground-water resources is a better understanding of the hydrogeology of the Tertiary Santa Fe Group. The Santa Fe Group includes the sedimentary deposits that fill the Rio Grande rift and contain the principal ground-water aquifers. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the Espa?ola Basin in northern New Mexico. Detailed geologic mapping, high-resolution airborne magnetic surveys, electromagnetic surveys, and hydrologic, lithologic, and hydro-geochemical data are being used to better understand the aquifer systems. Magnetotelluric (MT) surveys were completed as part of these studies. The primary purpose of the MT surveys was to map changes in electrical resistivity with depth that are related to differences in various rock types that help control the properties of aquifers in the region. Resistivity modeling of the MT data can be used to investigate buried structures related to the basic geologic framework of the study area. The purpose of this report is to release MT sounding data collected near geophysically logged boreholes in the study area, including the nearby Middle Rio Grande Basin. This MT data can be used in subsequent resistivity modeling. No interpretation of the data is included in this report.

  11. Three dimensional topography correction applied to magnetotelluric data from Sikkim Himalayas

    Science.gov (United States)

    Kumar, Sushil; Patro, Prasanta K.; Chaudhary, B. S.

    2018-06-01

    Magnetotelluric (MT) method is one of the powerful tools to investigate the deep crustal image of mountainous regions such as Himalayas. Topographic variations due to irregular surface terrain distort the resistivity curves and hence may not give accurate interpretation of magnetotelluric data. The two-dimensional (2-D) topographic effects in Transverse Magnetic (TM) mode is only galvanic whereas inductive in Transverse Electric (TE) mode, thus TM mode responses is much more important than TE mode responses in 2-D. In three-dimensional (3-D), the topography effect is both galvanic and inductive in each element of impedance tensor and hence the interpretation is complicated. In the present work, we investigate the effects of three-dimensional (3-D) topography for a hill model. This paper presents the impedance tensor correction algorithm to reduce the topographic effects in MT data. The distortion caused by surface topography effectively decreases by using homogeneous background resistivity in impedance correction method. In this study, we analyze the response of ramp, distance from topographic edges, conductive and resistive dykes. The new correction method is applied to the real data from Sikkim Himalayas, which brought out the true nature of the basement in this region.

  12. A Two-dimensional Version of the Niblett-Bostick Transformation for Magnetotelluric Interpretations

    Science.gov (United States)

    Esparza, F.

    2005-05-01

    An imaging technique for two-dimensional magnetotelluric interpretations is developed following the well known Niblett-Bostick transformation for one-dimensional profiles. The algorithm uses a Hopfield artificial neural network to process series and parallel magnetotelluric impedances along with their analytical influence functions. The adaptive, weighted average approximation preserves part of the nonlinearity of the original problem. No initial model in the usual sense is required for the recovery of a functional model. Rather, the built-in relationship between model and data considers automatically, all at the same time, many half spaces whose electrical conductivities vary according to the data. The use of series and parallel impedances, a self-contained pair of invariants of the impedance tensor, avoids the need to decide on best angles of rotation for TE and TM separations. Field data from a given profile can thus be fed directly into the algorithm without much processing. The solutions offered by the Hopfield neural network correspond to spatial averages computed through rectangular windows that can be chosen at will. Applications of the algorithm to simple synthetic models and to the COPROD2 data set illustrate the performance of the approximation.

  13. Probabilistic 3-D time-lapse inversion of magnetotelluric data: application to an enhanced geothermal system

    Science.gov (United States)

    Rosas-Carbajal, M.; Linde, N.; Peacock, J.; Zyserman, F. I.; Kalscheuer, T.; Thiel, S.

    2015-12-01

    Surface-based monitoring of mass transfer caused by injections and extractions in deep boreholes is crucial to maximize oil, gas and geothermal production. Inductive electromagnetic methods, such as magnetotellurics, are appealing for these applications due to their large penetration depths and sensitivity to changes in fluid conductivity and fracture connectivity. In this work, we propose a 3-D Markov chain Monte Carlo inversion of time-lapse magnetotelluric data to image mass transfer following a saline fluid injection. The inversion estimates the posterior probability density function of the resulting plume, and thereby quantifies model uncertainty. To decrease computation times, we base the parametrization on a reduced Legendre moment decomposition of the plume. A synthetic test shows that our methodology is effective when the electrical resistivity structure prior to the injection is well known. The centre of mass and spread of the plume are well retrieved. We then apply our inversion strategy to an injection experiment in an enhanced geothermal system at Paralana, South Australia, and compare it to a 3-D deterministic time-lapse inversion. The latter retrieves resistivity changes that are more shallow than the actual injection interval, whereas the probabilistic inversion retrieves plumes that are located at the correct depths and oriented in a preferential north-south direction. To explain the time-lapse data, the inversion requires unrealistically large resistivity changes with respect to the base model. We suggest that this is partly explained by unaccounted subsurface heterogeneities in the base model from which time-lapse changes are inferred.

  14. A magnetotelluric profile across the German Deep Drilling Project (KTB) area: Two- and three-dimensional modeling results

    Czech Academy of Sciences Publication Activity Database

    Eisel, M.; Haak, V.; Pek, Josef; Červ, Václav

    2001-01-01

    Roč. 106, B8 (2001), s. 16061-16073 ISSN 0148-0227 R&D Projects: GA ČR GA205/99/0917 Institutional research plan: CEZ:AV0Z3012916 Keywords : magnetotelluric profile * KTB * German Deep Drilling Project Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.609, year: 2001

  15. Magnetotelluric imaging of anisotropic crust near Fort McMurray, Alberta: implications for engineered geothermal system development

    Czech Academy of Sciences Publication Activity Database

    Liddell, M.; Unsworth, M.; Pek, Josef

    2016-01-01

    Roč. 205, č. 3 (2016), s. 1365-1381 ISSN 0956-540X Institutional support: RVO:67985530 Keywords : electrical anisotropy * composition of the continental crust * magnetotellurics * North America Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 2.414, year: 2016

  16. Audio frequency in vivo optical coherence elastography

    Science.gov (United States)

    Adie, Steven G.; Kennedy, Brendan F.; Armstrong, Julian J.; Alexandrov, Sergey A.; Sampson, David D.

    2009-05-01

    We present a new approach to optical coherence elastography (OCE), which probes the local elastic properties of tissue by using optical coherence tomography to measure the effect of an applied stimulus in the audio frequency range. We describe the approach, based on analysis of the Bessel frequency spectrum of the interferometric signal detected from scatterers undergoing periodic motion in response to an applied stimulus. We present quantitative results of sub-micron excitation at 820 Hz in a layered phantom and the first such measurements in human skin in vivo.

  17. Audio frequency in vivo optical coherence elastography

    International Nuclear Information System (INIS)

    Adie, Steven G; Kennedy, Brendan F; Armstrong, Julian J; Alexandrov, Sergey A; Sampson, David D

    2009-01-01

    We present a new approach to optical coherence elastography (OCE), which probes the local elastic properties of tissue by using optical coherence tomography to measure the effect of an applied stimulus in the audio frequency range. We describe the approach, based on analysis of the Bessel frequency spectrum of the interferometric signal detected from scatterers undergoing periodic motion in response to an applied stimulus. We present quantitative results of sub-micron excitation at 820 Hz in a layered phantom and the first such measurements in human skin in vivo.

  18. Mixing audio concepts, practices and tools

    CERN Document Server

    Izhaki, Roey

    2013-01-01

    Your mix can make or break a record, and mixing is an essential catalyst for a record deal. Professional engineers with exceptional mixing skills can earn vast amounts of money and find that they are in demand by the biggest acts. To develop such skills, you need to master both the art and science of mixing. The new edition of this bestselling book offers all you need to know and put into practice in order to improve your mixes. Covering the entire process --from fundamental concepts to advanced techniques -- and offering a multitude of audio samples, tips and tricks, this boo

  19. Non Audio-Video gesture recognition system

    DEFF Research Database (Denmark)

    Craciunescu, Razvan; Mihovska, Albena Dimitrova; Kyriazakos, Sofoklis

    2016-01-01

    Gesture recognition is a topic in computer science and language technology with the goal of interpreting human gestures via mathematical algorithms. Gestures can originate from any bodily motion or state but commonly originate from the face or hand. Current research focus includes on the emotion...... recognition from the face and hand gesture recognition. Gesture recognition enables humans to communicate with the machine and interact naturally without any mechanical devices. This paper investigates the possibility to use non-audio/video sensors in order to design a low-cost gesture recognition device...

  20. Use of Effective Audio in E-learning Courseware

    OpenAIRE

    Ray, Kisor

    2015-01-01

    E-Learning uses electronic media, information & communication technologies to provide education to the masses. E-learning deliver hypertext, text, audio, images, animation and videos using desktop standalone computer, local area network based intranet and internet based contents. While producing an e-learning content or course-ware, a major decision making factor is whether to use audio for the benefit of the end users. Generally, three types of audio can be used in e-learning: narration, mus...

  1. Investigating the impact of audio instruction and audio-visual biofeedback for lung cancer radiation therapy

    Science.gov (United States)

    George, Rohini

    Lung cancer accounts for 13% of all cancers in the Unites States and is the leading cause of deaths among both men and women. The five-year survival for lung cancer patients is approximately 15%.(ACS facts & figures) Respiratory motion decreases accuracy of thoracic radiotherapy during imaging and delivery. To account for respiration, generally margins are added during radiation treatment planning, which may cause a substantial dose delivery to normal tissues and increase the normal tissue toxicity. To alleviate the above-mentioned effects of respiratory motion, several motion management techniques are available which can reduce the doses to normal tissues, thereby reducing treatment toxicity and allowing dose escalation to the tumor. This may increase the survival probability of patients who have lung cancer and are receiving radiation therapy. However the accuracy of these motion management techniques are inhibited by respiration irregularity. The rationale of this thesis was to study the improvement in regularity of respiratory motion by breathing coaching for lung cancer patients using audio instructions and audio-visual biofeedback. A total of 331 patient respiratory motion traces, each four minutes in length, were collected from 24 lung cancer patients enrolled in an IRB-approved breathing-training protocol. It was determined that audio-visual biofeedback significantly improved the regularity of respiratory motion compared to free breathing and audio instruction, thus improving the accuracy of respiratory gated radiotherapy. It was also observed that duty cycles below 30% showed insignificant reduction in residual motion while above 50% there was a sharp increase in residual motion. The reproducibility of exhale based gating was higher than that of inhale base gating. Modeling the respiratory cycles it was found that cosine and cosine 4 models had the best correlation with individual respiratory cycles. The overall respiratory motion probability distribution

  2. Cortical Integration of Audio-Visual Information

    Science.gov (United States)

    Vander Wyk, Brent C.; Ramsay, Gordon J.; Hudac, Caitlin M.; Jones, Warren; Lin, David; Klin, Ami; Lee, Su Mei; Pelphrey, Kevin A.

    2013-01-01

    We investigated the neural basis of audio-visual processing in speech and non-speech stimuli. Physically identical auditory stimuli (speech and sinusoidal tones) and visual stimuli (animated circles and ellipses) were used in this fMRI experiment. Relative to unimodal stimuli, each of the multimodal conjunctions showed increased activation in largely non-overlapping areas. The conjunction of Ellipse and Speech, which most resembles naturalistic audiovisual speech, showed higher activation in the right inferior frontal gyrus, fusiform gyri, left posterior superior temporal sulcus, and lateral occipital cortex. The conjunction of Circle and Tone, an arbitrary audio-visual pairing with no speech association, activated middle temporal gyri and lateral occipital cortex. The conjunction of Circle and Speech showed activation in lateral occipital cortex, and the conjunction of Ellipse and Tone did not show increased activation relative to unimodal stimuli. Further analysis revealed that middle temporal regions, although identified as multimodal only in the Circle-Tone condition, were more strongly active to Ellipse-Speech or Circle-Speech, but regions that were identified as multimodal for Ellipse-Speech were always strongest for Ellipse-Speech. Our results suggest that combinations of auditory and visual stimuli may together be processed by different cortical networks, depending on the extent to which speech or non-speech percepts are evoked. PMID:20709442

  3. Semantic Labeling of Nonspeech Audio Clips

    Directory of Open Access Journals (Sweden)

    Xiaojuan Ma

    2010-01-01

    Full Text Available Human communication about entities and events is primarily linguistic in nature. While visual representations of information are shown to be highly effective as well, relatively little is known about the communicative power of auditory nonlinguistic representations. We created a collection of short nonlinguistic auditory clips encoding familiar human activities, objects, animals, natural phenomena, machinery, and social scenes. We presented these sounds to a broad spectrum of anonymous human workers using Amazon Mechanical Turk and collected verbal sound labels. We analyzed the human labels in terms of their lexical and semantic properties to ascertain that the audio clips do evoke the information suggested by their pre-defined captions. We then measured the agreement with the semantically compatible labels for each sound clip. Finally, we examined which kinds of entities and events, when captured by nonlinguistic acoustic clips, appear to be well-suited to elicit information for communication, and which ones are less discriminable. Our work is set against the broader goal of creating resources that facilitate communication for people with some types of language loss. Furthermore, our data should prove useful for future research in machine analysis/synthesis of audio, such as computational auditory scene analysis, and annotating/querying large collections of sound effects.

  4. Newnes audio and Hi-Fi engineer's pocket book

    CERN Document Server

    Capel, Vivian

    2013-01-01

    Newnes Audio and Hi-Fi Engineer's Pocket Book, Second Edition provides concise discussion of several audio topics. The book is comprised of 10 chapters that cover different audio equipment. The coverage of the text includes microphones, gramophones, compact discs, and tape recorders. The book also covers high-quality radio, amplifiers, and loudspeakers. The book then reviews the concepts of sound and acoustics, and presents some facts and formulas relevant to audio. The text will be useful to sound engineers and other professionals whose work involves sound systems.

  5. Audio scene segmentation for video with generic content

    Science.gov (United States)

    Niu, Feng; Goela, Naveen; Divakaran, Ajay; Abdel-Mottaleb, Mohamed

    2008-01-01

    In this paper, we present a content-adaptive audio texture based method to segment video into audio scenes. The audio scene is modeled as a semantically consistent chunk of audio data. Our algorithm is based on "semantic audio texture analysis." At first, we train GMM models for basic audio classes such as speech, music, etc. Then we define the semantic audio texture based on those classes. We study and present two types of scene changes, those corresponding to an overall audio texture change and those corresponding to a special "transition marker" used by the content creator, such as a short stretch of music in a sitcom or silence in dramatic content. Unlike prior work using genre specific heuristics, such as some methods presented for detecting commercials, we adaptively find out if such special transition markers are being used and if so, which of the base classes are being used as markers without any prior knowledge about the content. Our experimental results show that our proposed audio scene segmentation works well across a wide variety of broadcast content genres.

  6. Application of 2-D Inversion, to Magnetotelluric data on the Newberry Caldera, Oregon, for Potential Geothermal Power

    Science.gov (United States)

    Martin, T. P.; Schultz, A.

    2012-12-01

    understand the existing baseline subsurface resistivity structure at the Newberry site prior to well stimulation, magnetotelluric (MT) data will be collected in late July 2012 using two long period (1 Hz sampling) Narod Geophysics NIMS MT instruments along with EarthScope MT data aligned in a ~210 km long N-S profile centered on the stimulation zone. A 2-D inverse model will be obtained from the MT data set. The goal of this investigation is to determine the variations in the electrical resistivity in the mid-to-lower crust beneath the western flank of the caldera, providing a deeper view of putative heat sources than existing studies in this

  7. The Characteristics of Electromagnetic Fields Induced by Different Type Sources

    Science.gov (United States)

    Di, Q.; Fu, C.; Wang, R.; Xu, C.; An, Z.

    2011-12-01

    Controlled source audio-frequence magnetotelluric (CSAMT) method has played an important role in the shallow exploration (less than 1.5km) in the field of resources, environment and engineering geology. In order to prospect the deeper target, one has to increase the strength of the source and offset. However, the exploration is nearly impossible for the heavy larger power transmitting source used in the deeper prospecting and mountain area. So an EM method using a fixed large power source, such as long bipole current source, two perpendicular "L" shape long bipole current source and large radius circle current source, is beginning to take shape. In order to increase the strength of the source, the length of the transmitting bipole in one direction or in perpendicular directions has to be much larger, such as L=100km, or the radius of the circle current source is much larger. The electric field strength are IL2and IL2/4π separately for long bipole source and circle current source with the same wire length. Just considering the effectiveness of source, the strength of the circle current source is larger than that of long bipole source if is large enough. However, the strength of the electromagnetic signal doesn't totally depend on the transmitting source, the effect of ionosphere on the electromagnetic (EM) field should be considered when observation is carried at a very far (about several thousands kilometers) location away from the source for the long bipole source or the large radius circle current source. We firstly calculate the electromagnetic fields with the traditional controlled source (CSEM) configuration using the integral equation (IE) code developed by our research group for a three layers earth-ionosphere model which consists of ionosphere, atmosphere and earth media. The modeling results agree well with the half space analytical results because the effect of ionosphere for this small scale source can be ignorable, which means the integral equation

  8. Sound localization with head movement: implications for 3-d audio displays.

    Directory of Open Access Journals (Sweden)

    Ken Ian McAnally

    2014-08-01

    Full Text Available Previous studies have shown that the accuracy of sound localization is improved if listeners are allowed to move their heads during signal presentation. This study describes the function relating localization accuracy to the extent of head movement in azimuth. Sounds that are difficult to localize were presented in the free field from sources at a wide range of azimuths and elevations. Sounds remained active until the participants’ heads had rotated through windows ranging in width of 2°, 4°, 8°, 16°, 32°, or 64° of azimuth. Error in determining sound-source elevation and the rate of front/back confusion were found to decrease with increases in azimuth window width. Error in determining sound-source lateral angle was not found to vary with azimuth window width. Implications for 3-d audio displays: The utility of a 3-d audio display for imparting spatial information is likely to be improved if operators are able to move their heads during signal presentation. Head movement may compensate in part for a paucity of spectral cues to sound-source location resulting from limitations in either the audio signals presented or the directional filters (i.e., head-related transfer functions used to generate a display. However, head movements of a moderate size (i.e., through around 32° of azimuth may be required to ensure that spatial information is conveyed with high accuracy.

  9. Sources

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1991-01-01

    This paper discusses the sources of radiation in the narrow perspective of radioactivity and the even narrow perspective of those sources that concern environmental management and restoration activities at DOE facilities, as well as a few related sources. Sources of irritation, Sources of inflammatory jingoism, and Sources of information. First, the sources of irritation fall into three categories: No reliable scientific ombudsman to speak without bias and prejudice for the public good, Technical jargon with unclear definitions exists within the radioactive nomenclature, and Scientific community keeps a low-profile with regard to public information. The next area of personal concern are the sources of inflammation. This include such things as: Plutonium being described as the most dangerous substance known to man, The amount of plutonium required to make a bomb, Talk of transuranic waste containing plutonium and its health affects, TMI-2 and Chernobyl being described as Siamese twins, Inadequate information on low-level disposal sites and current regulatory requirements under 10 CFR 61, Enhanced engineered waste disposal not being presented to the public accurately. Numerous sources of disinformation regarding low level radiation high-level radiation, Elusive nature of the scientific community, The Federal and State Health Agencies resources to address comparative risk, and Regulatory agencies speaking out without the support of the scientific community

  10. Combined NLCG/SBI magnetotelluric data inversion for recognition of complex geological structures

    International Nuclear Information System (INIS)

    Michal Stefaniuk

    2009-01-01

    Complete text of publication follows. Geological interpretation of magnetotelluric data is a subject of some misunderstandings. Simplified geometrically and well contrasted in resistivity models do not response for real geological environment. The aim of outstripping magnetotelluric works widely made in Polish Outer Carpathians, is general structural and lithological recognising of geological environment and distinguishing of areas where oil prospection will be projected. The geological medium is formed by sedimentary formations, strongly deformed and containing relatively thin layers with essentially differentiated parameters, overlying rather flat, high resistivity basement. Application of simplified strongly contrasted interpretation model with fluently changing parameters gives frequently results not corresponding with geological reality. Presented analysis is based on surveys located in marginal zone of Carpathianst in the area relatively well recognised, where interpreted structural and lithologic model rather well reflects real geological medium. Then, it was used as reference model for obtained results of MT data inversion. Magnetotelluric continuous profiling located along reflection seismic profile, between two deep boreholes was made. Set of results of computations allows to evaluate of effectiveness of used procedures and suggest optimum way of dealing. First stage of data interpretation was based on 1D and EMAP inversion. The section was then applied as starting model for 2D NLCG inversion. Results of this method give rather generalized resistivity distribution well reflecting structure of flysch cover but not adequate for the basement. This models was applied as starting models for SBI inversion constrained by borehole data. Results of SBI procedure well reflects relatively flat complexes of the basement, but are rather unrealistic for folded flysch cover. The another NLCG inversion was computed with stabilised model of basement obtained from SBI

  11. High Resolution Magnetotelluric Imaging of the Nisyros Caldera and Geothermal Resource (Greece)

    Science.gov (United States)

    Tzanis, Andreas; Sakkas, Vassilis; Lagios, Evangelos

    2017-04-01

    This work reports the qualitative and quantitative re-examination of legacy magnetotelluric soundings data obtained in the caldera of Nisyros, a small island volcano at the eastern end of the Hellenic Volcanic Arc (HVA), Greece, in an attempt to explore the high temperature geothermal resource of the area. The data set comprises 39 single-site soundings and is re-examined with improved data processing methods, new hypothetical event analysis techniques to study the spatial configuration of the telluric field and two-dimensional inversion tools. Iteratively reweighted least squares have been implemented to compute stable and smooth Earth response functions, which were found to exhibit 2-D to weakly 3-D attributes as a result of induction in low-contrast local geoelectric inhomogeneities, superimposed on a dominantly 2-D background structure. The transfer functions appear to be free of coastal and island induction effects due to the low offshore/onshore resistivity contrast at, and below sea level. The spatial properties of the telluric field are studied with hypothetical event analysis based on 3-D decompositions of the impedance tensor [1]. The results indicate that convection and hydrothermal circulation is controlled by a system of antithetic NE-SW oriented active normal faults which form a graben-like structure and define the 2-D background, as well as a conjugate system of NNW-SSE normal faults which is particularly active at the SW quadrant of the island and define the main convection path. It was determined that under these conditions the data can be interpreted with 2-D inversion, which was carried out with [2]. The inversion has successfully reconstructed detailed images of the structural and functional elements of the hydrothermal system. The structural elements include a number of shallow hot water reservoirs in the argillic and phyllic alteration zones and a laterally extended deep (approx. 1km) circulation zone, all embedded in a low-resistivity matrix

  12. Neuromorphic Audio-Visual Sensor Fusion on a Sound-Localising Robot

    Directory of Open Access Journals (Sweden)

    Vincent Yue-Sek Chan

    2012-02-01

    Full Text Available This paper presents the first robotic system featuring audio-visual sensor fusion with neuromorphic sensors. We combine a pair of silicon cochleae and a silicon retina on a robotic platform to allow the robot to learn sound localisation through self-motion and visual feedback, using an adaptive ITD-based sound localisation algorithm. After training, the robot can localise sound sources (white or pink noise in a reverberant environment with an RMS error of 4 to 5 degrees in azimuth. In the second part of the paper, we investigate the source binding problem. An experiment is conducted to test the effectiveness of matching an audio event with a corresponding visual event based on their onset time. The results show that this technique can be quite effective, despite its simplicity.

  13. Pareto joint inversion of 2D magnetotelluric and gravity data

    Science.gov (United States)

    Miernik, Katarzyna; Bogacz, Adrian; Kozubal, Adam; Danek, Tomasz; Wojdyła, Marek

    2015-04-01

    In this contribution, the first results of the "Innovative technology of petrophysical parameters estimation of geological media using joint inversion algorithms" project were described. At this stage of the development, Pareto joint inversion scheme for 2D MT and gravity data was used. Additionally, seismic data were provided to set some constrains for the inversion. Sharp Boundary Interface(SBI) approach and description model with set of polygons were used to limit the dimensionality of the solution space. The main engine was based on modified Particle Swarm Optimization(PSO). This algorithm was properly adapted to handle two or more target function at once. Additional algorithm was used to eliminate non- realistic solution proposals. Because PSO is a method of stochastic global optimization, it requires a lot of proposals to be evaluated to find a single Pareto solution and then compose a Pareto front. To optimize this stage parallel computing was used for both inversion engine and 2D MT forward solver. There are many advantages of proposed solution of joint inversion problems. First of all, Pareto scheme eliminates cumbersome rescaling of the target functions, that can highly affect the final solution. Secondly, the whole set of solution is created in one optimization run, providing a choice of the final solution. This choice can be based off qualitative data, that are usually very hard to be incorporated into the regular inversion schema. SBI parameterisation not only limits the problem of dimensionality, but also makes constraining of the solution easier. At this stage of work, decision to test the approach using MT and gravity data was made, because this combination is often used in practice. It is important to mention, that the general solution is not limited to this two methods and it is flexible enough to be used with more than two sources of data. Presented results were obtained for synthetic models, imitating real geological conditions, where

  14. An Analysis of Audio Features to Develop a Human Activity Recognition Model Using Genetic Algorithms, Random Forests, and Neural Networks

    Directory of Open Access Journals (Sweden)

    Carlos E. Galván-Tejada

    2016-01-01

    Full Text Available This work presents a human activity recognition (HAR model based on audio features. The use of sound as an information source for HAR models represents a challenge because sound wave analyses generate very large amounts of data. However, feature selection techniques may reduce the amount of data required to represent an audio signal sample. Some of the audio features that were analyzed include Mel-frequency cepstral coefficients (MFCC. Although MFCC are commonly used in voice and instrument recognition, their utility within HAR models is yet to be confirmed, and this work validates their usefulness. Additionally, statistical features were extracted from the audio samples to generate the proposed HAR model. The size of the information is necessary to conform a HAR model impact directly on the accuracy of the model. This problem also was tackled in the present work; our results indicate that we are capable of recognizing a human activity with an accuracy of 85% using the HAR model proposed. This means that minimum computational costs are needed, thus allowing portable devices to identify human activities using audio as an information source.

  15. Independent Interactive Inquiry-Based Learning Modules Using Audio-Visual Instruction In Statistics

    OpenAIRE

    McDaniel, Scott N.; Green, Lisa

    2012-01-01

    Simulations can make complex ideas easier for students to visualize and understand. It has been shown that guidance in the use of these simulations enhances students’ learning. This paper describes the implementation and evaluation of the Independent Interactive Inquiry-based (I3) Learning Modules, which use existing open-source Java applets, combined with audio-visual instruction. Students are guided to discover and visualize important concepts in post-calculus and algebra-based courses in p...

  16. Energy Use of Home Audio Products in the U.S.

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, K.B.; Meier, A.K.

    1999-12-01

    We conducted a bottom-up analysis using stock and usage estimates from secondary sources, and our own power measurements. We measured power levels of the most common audio products in their most commonly used operating modes. We found that the combined energy consumption of standby, idle, and play modes of clock radios, portable stereos, compact stereos, and component stereos was 20 TWh/yr, representing about 1.8% of the 1998 national residential electricity consumption.

  17. The MIT Lincoln Laboratory RT-04F Diarization Systems: Applications to Broadcast Audio and Telephone Conversations

    Science.gov (United States)

    2004-11-01

    this paper we describe the systems developed by MITLL and used in DARPA EARS Rich Transcription Fall 2004 (RT-04F) speaker diarization evaluation...many types of audio sources, the focus if the DARPA EARS project and the NIST Rich Transcription evaluations is primarily speaker diarization ...present or samples of any of the speakers . An overview of the general diarization problem and approaches can be found in [1]. In this paper, we

  18. Visualising the environmental appearance of audio products

    Energy Technology Data Exchange (ETDEWEB)

    Stilma, M. [Univ. of Twente, Enschede (Netherlands); Stevels, A. [Delft Univ. of Technology, Delft (Netherlands)]|[Philips Consumer Electronics, Eindhoven (Netherlands); Christiaans, H.; Kandachar, P. [Delft Univ. of Technology, Delft (Netherlands)

    2004-07-01

    Can environmental friendliness be communicated by the design style and appearance of products? (such as form, colour, style or material)? Consumers are interested in buying environmental products and design styles might be used as communicative tools. However, current 'green' products show something else. Environmental aspects are chiefly promoted by marketing programs based on technical items like the use of materials, hazardous substances, energy consumption, etc. By a qualitative and exploratory research the environmental design styles according to consumers' opinions were analysed with larger audio products as case study. Visible distinctive differences can be identified between the most and the least environmental rated products. A 'Green flagship', which claims to be environmentally orientated, wasn't recognised as such by consumers. And women and men perceive environmental friendliness in another way. From this research can be concluded that more attention is needed to visualise the good technical environmental performance of products. (orig.)

  19. Time-Scale Invariant Audio Data Embedding

    Directory of Open Access Journals (Sweden)

    Mansour Mohamed F

    2003-01-01

    Full Text Available We propose a novel algorithm for high-quality data embedding in audio. The algorithm is based on changing the relative length of the middle segment between two successive maximum and minimum peaks to embed data. Spline interpolation is used to change the lengths. To ensure smooth monotonic behavior between peaks, a hybrid orthogonal and nonorthogonal wavelet decomposition is used prior to data embedding. The possible data embedding rates are between 20 and 30 bps. However, for practical purposes, we use repetition codes, and the effective embedding data rate is around 5 bps. The algorithm is invariant after time-scale modification, time shift, and time cropping. It gives high-quality output and is robust to mp3 compression.

  20. Audio visual information materials for risk communication

    International Nuclear Information System (INIS)

    Gunji, Ikuko; Tabata, Rimiko; Ohuchi, Naomi

    2005-07-01

    Japan Nuclear Cycle Development Institute (JNC), Tokai Works set up the Risk Communication Study Team in January, 2001 to promote mutual understanding between the local residents and JNC. The Team has studied risk communication from various viewpoints and developed new methods of public relations which are useful for the local residents' risk perception toward nuclear issues. We aim to develop more effective risk communication which promotes a better mutual understanding of the local residents, by providing the risk information of the nuclear fuel facilities such a Reprocessing Plant and other research and development facilities. We explain the development process of audio visual information materials which describe our actual activities and devices for the risk management in nuclear fuel facilities, and our discussion through the effectiveness measurement. (author)

  1. On the Use of Memory Models in Audio Features

    DEFF Research Database (Denmark)

    Jensen, Karl Kristoffer

    2011-01-01

    Audio feature estimation is potentially improved by including higher- level models. One such model is the Short Term Memory (STM) model. A new paradigm of audio feature estimation is obtained by adding the influence of notes in the STM. These notes are identified when the perceptual spectral flux...

  2. Tune in the Net with RealAudio.

    Science.gov (United States)

    Buchanan, Larry

    1997-01-01

    Describes how to connect to the RealAudio Web site to download a player that provides sound from Web pages to the computer through streaming technology. Explains hardware and software requirements and provides addresses for other RealAudio Web sites are provided, including weather information and current news. (LRW)

  3. Four-quadrant flyback converter for direct audio power amplification

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.

    2005-01-01

    This paper presents a bidirectional, four-quadrant flyback converter for use in direct audio power amplification. When compared to the standard Class-D switching audio power amplifier with a separate power supply, the proposed four-quadrant flyback converter provides simple solution with better...

  4. Four-quadrant flyback converter for direct audio power amplification

    OpenAIRE

    Ljusev, Petar; Andersen, Michael Andreas E.

    2005-01-01

    This paper presents a bidirectional, four-quadrant flyback converter for use in direct audio power amplification. When compared to the standard Class-D switching audio power amplifier with a separate power supply, the proposed four-quadrant flyback converter provides simple solution with better efficiency, higher level of integration and lower component count.

  5. Unsupervised topic modelling on South African parliament audio data

    CSIR Research Space (South Africa)

    Kleynhans, N

    2014-11-01

    Full Text Available Using a speech recognition system to convert spoken audio to text can enable the structuring of large collections of spoken audio data. A convenient means to summarise or cluster spoken data is to identify the topic under discussion. There are many...

  6. The Effect of Audio and Animation in Multimedia Instruction

    Science.gov (United States)

    Koroghlanian, Carol; Klein, James D.

    2004-01-01

    This study investigated the effects of audio, animation, and spatial ability in a multimedia computer program for high school biology. Participants completed a multimedia program that presented content by way of text or audio with lean text. In addition, several instructional sequences were presented either with static illustrations or animations.…

  7. The Use of Audio and Animation in Computer Based Instruction.

    Science.gov (United States)

    Koroghlanian, Carol; Klein, James D.

    This study investigated the effects of audio, animation, and spatial ability in a computer-based instructional program for biology. The program presented instructional material via test or audio with lean text and included eight instructional sequences presented either via static illustrations or animations. High school students enrolled in a…

  8. Multi Carrier Modulation Audio Power Amplifier with Programmable Logic

    DEFF Research Database (Denmark)

    Christiansen, Theis; Andersen, Toke Meyer; Knott, Arnold

    2009-01-01

    While switch-mode audio power amplifiers allow compact implementations and high output power levels due to their high power efficiency, they are very well known for creating electromagnetic interference (EMI) with other electronic equipment. To lower the EMI of switch-mode (class D) audio power a...

  9. Let Their Voices Be Heard! Building a Multicultural Audio Collection.

    Science.gov (United States)

    Tucker, Judith Cook

    1992-01-01

    Discusses building a multicultural audio collection for a library. Gives some guidelines about selecting materials that really represent different cultures. Audio materials that are considered fall roughly into the categories of children's stories, didactic materials, oral histories, poetry and folktales, and music. The goal is an authentic…

  10. Efficiency in audio processing : filter banks and transcoding

    NARCIS (Netherlands)

    Lee, Jun Wei

    2007-01-01

    Audio transcoding is the conversion of digital audio from one compressed form A to another compressed form B, where A and B have different compression properties, such as a different bit-rate, sampling frequency or compression method. This is typically achieved by decoding A to an intermediate

  11. Parametric Audio Based Decoder and Music Synthesizer for Mobile Applications

    NARCIS (Netherlands)

    Oomen, A.W.J.; Szczerba, M.Z.; Therssen, D.

    2011-01-01

    This paper reviews parametric audio coders and discusses novel technologies introduced in a low-complexity, low-power consumption audiodecoder and music synthesizer platform developed by the authors. Thedecoder uses parametric coding scheme based on the MPEG-4 Parametric Audio standard. In order to

  12. Decision-level fusion for audio-visual laughter detection

    NARCIS (Netherlands)

    Reuderink, B.; Poel, M.; Truong, K.; Poppe, R.; Pantic, M.

    2008-01-01

    Laughter is a highly variable signal, which can be caused by a spectrum of emotions. This makes the automatic detection of laughter a challenging, but interesting task. We perform automatic laughter detection using audio-visual data from the AMI Meeting Corpus. Audio-visual laughter detection is

  13. Decision-Level Fusion for Audio-Visual Laughter Detection

    NARCIS (Netherlands)

    Reuderink, B.; Poel, Mannes; Truong, Khiet Phuong; Poppe, Ronald Walter; Pantic, Maja; Popescu-Belis, Andrei; Stiefelhagen, Rainer

    Laughter is a highly variable signal, which can be caused by a spectrum of emotions. This makes the automatic detection of laugh- ter a challenging, but interesting task. We perform automatic laughter detection using audio-visual data from the AMI Meeting Corpus. Audio- visual laughter detection is

  14. Classifying laughter and speech using audio-visual feature prediction

    NARCIS (Netherlands)

    Petridis, Stavros; Asghar, Ali; Pantic, Maja

    2010-01-01

    In this study, a system that discriminates laughter from speech by modelling the relationship between audio and visual features is presented. The underlying assumption is that this relationship is different between speech and laughter. Neural networks are trained which learn the audio-to-visual and

  15. Haptic and Audio-visual Stimuli: Enhancing Experiences and Interaction

    NARCIS (Netherlands)

    Nijholt, Antinus; Dijk, Esko O.; Lemmens, Paul M.C.; Luitjens, S.B.

    2010-01-01

    The intention of the symposium on Haptic and Audio-visual stimuli at the EuroHaptics 2010 conference is to deepen the understanding of the effect of combined Haptic and Audio-visual stimuli. The knowledge gained will be used to enhance experiences and interactions in daily life. To this end, a

  16. Automated Speech and Audio Analysis for Semantic Access to Multimedia

    NARCIS (Netherlands)

    Jong, F.M.G. de; Ordelman, R.; Huijbregts, M.

    2006-01-01

    The deployment and integration of audio processing tools can enhance the semantic annotation of multimedia content, and as a consequence, improve the effectiveness of conceptual access tools. This paper overviews the various ways in which automatic speech and audio analysis can contribute to

  17. Automated speech and audio analysis for semantic access to multimedia

    NARCIS (Netherlands)

    de Jong, Franciska M.G.; Ordelman, Roeland J.F.; Huijbregts, M.A.H.; Avrithis, Y.; Kompatsiaris, Y.; Staab, S.; O' Connor, N.E.

    2006-01-01

    The deployment and integration of audio processing tools can enhance the semantic annotation of multimedia content, and as a consequence, improve the effectiveness of conceptual access tools. This paper overviews the various ways in which automatic speech and audio analysis can contribute to

  18. Multilevel inverter based class D audio amplifier for capacitive transducers

    DEFF Research Database (Denmark)

    Nielsen, Dennis; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    The reduced semiconductor voltage stress makes the multilevel inverters especially interesting, when driving capacitive transducers for audio applications. A ± 300 V flying capacitor class D audio amplifier driving a 100 nF load in the midrange region of 0.1-3.5 kHz with Total Harmonic Distortion...

  19. Voice activity detection using audio-visual information

    DEFF Research Database (Denmark)

    Petsatodis, Theodore; Pnevmatikakis, Aristodemos; Boukis, Christos

    2009-01-01

    An audio-visual voice activity detector that uses sensors positioned distantly from the speaker is presented. Its constituting unimodal detectors are based on the modeling of the temporal variation of audio and visual features using Hidden Markov Models; their outcomes are fused using a post...

  20. Audio Teleconferencing: Low Cost Technology for External Studies Networking.

    Science.gov (United States)

    Robertson, Bill

    1987-01-01

    This discussion of the benefits of audio teleconferencing for distance education programs and for business and government applications focuses on the recent experience of Canadian educational users. Four successful operating models and their costs are reviewed, and it is concluded that audio teleconferencing is cost efficient and educationally…

  1. Content Discovery from Composite Audio : An unsupervised approach

    NARCIS (Netherlands)

    Lu, L.

    2009-01-01

    In this thesis, we developed and assessed a novel robust and unsupervised framework for semantic inference from composite audio signals. We focused on the problem of detecting audio scenes and grouping them into meaningful clusters. Our approach addressed all major steps in a general process of

  2. Removable Watermarking Sebagai Pengendalian Terhadap Cyber Crime Pada Audio Digital

    Directory of Open Access Journals (Sweden)

    Reyhani Lian Putri

    2017-08-01

    Full Text Available Perkembangan teknologi informasi yang pesat menuntut penggunanya untuk lebih berhati-hati seiring semakin meningkatnya cyber crime.Banyak pihak telah mengembangkan berbagai teknik perlindungan data digital, salah satunya adalah watermarking. Teknologi watermarking berfungsi untuk memberikan identitas, melindungi, atau menandai data digital, baik audio, citra, ataupun video, yang mereka miliki. Akan tetapi, teknik tersebut masih dapat diretas oleh oknum-oknum yang tidak bertanggung jawab.Pada penelitian ini, proses watermarking diterapkan pada audio digital dengan menyisipkan watermark yang terdengar jelas oleh indera pendengaran manusia (perceptible pada audio host.Hal ini bertujuan agar data audio dapat terlindungi dan apabila ada pihak lain yang ingin mendapatkan data audio tersebut harus memiliki “kunci” untuk menghilangkan watermark. Proses removable watermarking ini dilakukan pada data watermark yang sudah diketahui metode penyisipannya, agar watermark dapat dihilangkan sehingga kualitas audio menjadi lebih baik. Dengan menggunakan metode ini diperoleh kinerja audio watermarking pada nilai distorsi tertinggi dengan rata-rata nilai SNR sebesar7,834 dB dan rata-rata nilai ODG sebesar -3,77.Kualitas audio meningkat setelah watermark dihilangkan, di mana rata-rata SNR menjadi sebesar 24,986 dB dan rata-rata ODG menjadi sebesar -1,064 serta nilai MOS sebesar 4,40.

  3. Selected Audio-Visual Materials for Consumer Education. [New Version.

    Science.gov (United States)

    Johnston, William L.

    Ninety-two films, filmstrips, multi-media kits, slides, and audio cassettes, produced between 1964 and 1974, are listed in this selective annotated bibliography on consumer education. The major portion of the bibliography is devoted to films and filmstrips. The main topics of the audio-visual materials include purchasing, advertising, money…

  4. Noise-Canceling Helmet Audio System

    Science.gov (United States)

    Seibert, Marc A.; Culotta, Anthony J.

    2007-01-01

    A prototype helmet audio system has been developed to improve voice communication for the wearer in a noisy environment. The system was originally intended to be used in a space suit, wherein noise generated by airflow of the spacesuit life-support system can make it difficult for remote listeners to understand the astronaut s speech and can interfere with the astronaut s attempt to issue vocal commands to a voice-controlled robot. The system could be adapted to terrestrial use in helmets of protective suits that are typically worn in noisy settings: examples include biohazard, fire, rescue, and diving suits. The system (see figure) includes an array of microphones and small loudspeakers mounted at fixed positions in a helmet, amplifiers and signal-routing circuitry, and a commercial digital signal processor (DSP). Notwithstanding the fixed positions of the microphones and loudspeakers, the system can accommodate itself to any normal motion of the wearer s head within the helmet. The system operates in conjunction with a radio transceiver. An audio signal arriving via the transceiver intended to be heard by the wearer is adjusted in volume and otherwise conditioned and sent to the loudspeakers. The wearer s speech is collected by the microphones, the outputs of which are logically combined (phased) so as to form a microphone- array directional sensitivity pattern that discriminates in favor of sounds coming from vicinity of the wearer s mouth and against sounds coming from elsewhere. In the DSP, digitized samples of the microphone outputs are processed to filter out airflow noise and to eliminate feedback from the loudspeakers to the microphones. The resulting conditioned version of the wearer s speech signal is sent to the transceiver.

  5. AUDIO CRYPTANALYSIS- AN APPLICATION OF SYMMETRIC KEY CRYPTOGRAPHY AND AUDIO STEGANOGRAPHY

    Directory of Open Access Journals (Sweden)

    Smita Paira

    2016-09-01

    Full Text Available In the recent trend of network and technology, “Cryptography” and “Steganography” have emerged out as the essential elements of providing network security. Although Cryptography plays a major role in the fabrication and modification of the secret message into an encrypted version yet it has certain drawbacks. Steganography is the art that meets one of the basic limitations of Cryptography. In this paper, a new algorithm has been proposed based on both Symmetric Key Cryptography and Audio Steganography. The combination of a randomly generated Symmetric Key along with LSB technique of Audio Steganography sends a secret message unrecognizable through an insecure medium. The Stego File generated is almost lossless giving a 100 percent recovery of the original message. This paper also presents a detailed experimental analysis of the algorithm with a brief comparison with other existing algorithms and a future scope. The experimental verification and security issues are promising.

  6. Magnetotelluric Investigations of the Yellowstone Caldera: Understanding the Emplacement of Crustal Magma Bodies

    Science.gov (United States)

    Gurrola, R. M.; Neal, B. A.; Bennington, N. L.; Cronin, R.; Fry, B.; Hart, L.; Imamura, N.; Kelbert, A.; Bowles-martinez, E.; Miller, D. J.; Scholz, K. J.; Schultz, A.

    2017-12-01

    Wideband magnetotellurics (MT) presents an ideal method for imaging conductive shallow magma bodies associated with contemporary Yellowstone-Snake River Plain (YSRP) magmatism. Particularly, how do these magma bodies accumulate in the mid to upper crust underlying the Yellowstone Caldera, and furthermore, what role do hydrothermal fluids play in their ascent? During the summer 2017 field season, two field teams from Oregon State University and the University of Wisconsin-Madison installed forty-four wideband MT stations within and around the caldera, and using data slated for joint 3-D inversion with existing seismic data, two 2-D vertical conductivity sections of the crust and upper mantle were constructed. These models, in turn, provide preliminary insight into the emplacement of crustal magma bodies and hydrothermal processes in the YSRP region.

  7. Quantitative methodology to extract regional magnetotelluric impedances and determine the dimension of the conductivity structure

    Energy Technology Data Exchange (ETDEWEB)

    Groom, R [PetRos EiKon Incorporated, Ontario (Canada); Kurtz, R; Jones, A; Boerner, D [Geological Survey of Canada, Ontario (Canada)

    1996-05-01

    This paper describes a systematic method for determining the appropriate dimensionality of magnetotelluric (MT) data from a site, and illustrates the application of this method to analyze both synthetic data and real data. Additionally, it describes the extraction of regional impedance responses from multiple sites. This method was examined extensively with synthetic data, and proven to be successful. It was demonstrated for two neighboring sites that the analysis methodology can be extremely useful in unraveling the bulk regional response when hidden by strong three-dimensional effects. Although there may still be some uncertainties remaining in the true levels for the regional responses for stations LIT000 and LITW02, the analysis has provided models which not only fit the data but are consistent for neighboring sites. It was suggested from these data that the stations are seeing significantly different structures. 12 refs.

  8. Model heat flow and magnetotellurics for the San Andreas and oceanic transform faults

    International Nuclear Information System (INIS)

    Ricard, Y.; Froidevaux, C.; Hermance, J.F.

    1983-01-01

    Two-dimensional temperature structures are computed for a lithospheric shear zone in order to predict the geometry of the hot anomalous region caused by shear heating. The results are compatible with earlier one-dimensional models. The comparison with the heat flow data from California is quite satisfactory. It requires to take into account the geometrical constraints corresponding to the migration of the Mendocino triple point. This is obtained by solving the time dependent heat equation. The possibility to probe the existence of a sub-Moho hot window by magnetotelluric sounding is then examined. A drop in apparent resistivity by a factor 2 to 4 is predicted. However, the presence of conductive sedimentary basins at the surface may hide this effect in California. In this respect the ocean floor transform faults might offer a somewhat simpler site for field observations

  9. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  10. Audio Mining with emphasis on Music Genre Classification

    DEFF Research Database (Denmark)

    Meng, Anders

    2004-01-01

    Audio is an important part of our daily life, basically it increases our impression of the world around us whether this is communication, music, danger detection etc. Currently the field of Audio Mining, which here includes areas of music genre, music recognition / retrieval, playlist generation...... the world the problem of detecting environments from the input audio is researched as to increase the life quality of hearing-impaired. Basically there is a lot of work within the field of audio mining. The presentation will mainly focus on music genre classification where we have a fixed amount of genres...... to choose from. Basically every audio mining system is more or less consisting of the same stages as for the music genre setting. My research so far has mainly focussed on finding relevant features for music genre classification living at different timescales using early and late information fusion. It has...

  11. Robust audio-visual speech recognition under noisy audio-video conditions.

    Science.gov (United States)

    Stewart, Darryl; Seymour, Rowan; Pass, Adrian; Ming, Ji

    2014-02-01

    This paper presents the maximum weighted stream posterior (MWSP) model as a robust and efficient stream integration method for audio-visual speech recognition in environments, where the audio or video streams may be subjected to unknown and time-varying corruption. A significant advantage of MWSP is that it does not require any specific measurements of the signal in either stream to calculate appropriate stream weights during recognition, and as such it is modality-independent. This also means that MWSP complements and can be used alongside many of the other approaches that have been proposed in the literature for this problem. For evaluation we used the large XM2VTS database for speaker-independent audio-visual speech recognition. The extensive tests include both clean and corrupted utterances with corruption added in either/both the video and audio streams using a variety of types (e.g., MPEG-4 video compression) and levels of noise. The experiments show that this approach gives excellent performance in comparison to another well-known dynamic stream weighting approach and also compared to any fixed-weighted integration approach in both clean conditions or when noise is added to either stream. Furthermore, our experiments show that the MWSP approach dynamically selects suitable integration weights on a frame-by-frame basis according to the level of noise in the streams and also according to the naturally fluctuating relative reliability of the modalities even in clean conditions. The MWSP approach is shown to maintain robust recognition performance in all tested conditions, while requiring no prior knowledge about the type or level of noise.

  12. Impact of Audio-Coaching on the Position of Lung Tumors

    International Nuclear Information System (INIS)

    Haasbeek, Cornelis J.A.; Spoelstra, Femke; Lagerwaard, Frank J.; Soernsen de Koste, John R. van; Cuijpers, Johan P.; Slotman, Ben J.; Senan, Suresh

    2008-01-01

    Purpose: Respiration-induced organ motion is a major source of positional, or geometric, uncertainty in thoracic radiotherapy. Interventions to mitigate the impact of motion include audio-coached respiration-gated radiotherapy (RGRT). To assess the impact of coaching on average tumor position during gating, we analyzed four-dimensional computed tomography (4DCT) scans performed both with and without audio-coaching. Methods and Materials: Our RGRT protocol requires that an audio-coached 4DCT scan is performed when the initial free-breathing 4DCT indicates a potential benefit with gating. We retrospectively analyzed 22 such paired scans in patients with well-circumscribed tumors. Changes in lung volume and position of internal target volumes (ITV) generated in three consecutive respiratory phases at both end-inspiration and end-expiration were analyzed. Results: Audio-coaching increased end-inspiration lung volumes by a mean of 10.2% (range, -13% to +43%) when compared with free breathing (p = 0.001). The mean three-dimensional displacement of the center of ITV was 3.6 mm (SD, 2.5; range, 0.3-9.6mm), mainly caused by displacement in the craniocaudal direction. Displacement of ITV caused by coaching was more than 5 mm in 5 patients, all of whom were in the subgroup of 9 patients showing total tumor motion of 10 mm or more during both coached and uncoached breathing. Comparable ITV displacements were observed at end-expiration phases of the 4DCT. Conclusions: Differences in ITV position exceeding 5 mm between coached and uncoached 4DCT scans were detected in up to 56% of mobile tumors. Both end-inspiration and end-expiration RGRT were susceptible to displacements. This indicates that the method of audio-coaching should remain unchanged throughout the course of treatment

  13. Resistivity structure of Sumatran Fault (Aceh segment) derived from 1-D magnetotelluric modeling

    Science.gov (United States)

    Nurhasan, Sutarno, D.; Bachtiar, H.; Sugiyanto, D.; Ogawa, Y.; Kimata, F.; Fitriani, D.

    2012-06-01

    Sumatran Fault Zone is the most active fault in Indonesia as a result of strike-slip component of Indo-Australian oblique convergence. With the length of 1900 km, Sumatran fault was divided into 20 segments starting from the southernmost Sumatra Island having small slip rate and increasing to the north end of Sumatra Island. There are several geophysical methods to analyze fault structure depending on physical parameter used in these methods, such as seismology, geodesy and electromagnetic. Magnetotelluric method which is one of geophysical methods has been widely used in mapping and sounding resistivity distribution because it does not only has the ability for detecting contras resistivity but also has a penetration range up to hundreds of kilometers. Magnetotelluric survey was carried out in Aceh region with the 12 total sites crossing Sumatran Fault on Aceh and Seulimeum segments. Two components of electric and magnetic fields were recorded during 10 hours in average with the frequency range from 320 Hz to 0,01 Hz. Analysis of the pseudosection of phase and apparent resistivity exhibit vertical low phase flanked on the west and east by high phase describing the existence of resistivity contras in this region. Having rotated the data to N45°E direction, interpretation of the result has been performed using three different methods of 1D MT modeling i.e. Bostick inversion, 1D MT inversion of TM data, and 1D MT inversion of the impedance determinant. By comparison, we concluded that the use of TM data only and the impedance determinant in 1D inversion yield the more reliable resistivity structure of the fault compare to other methods. Based on this result, it has been shown clearly that Sumatra Fault is characterized by vertical contras resistivity indicating the existence of Aceh and Seulimeum faults which has a good agreement with the geological data.

  14. Probabilistic 3-D time-lapse inversion of magnetotelluric data: Application to an enhanced geothermal system

    Science.gov (United States)

    Rosas-Carbajal, Marina; Linde, Nicolas; Peacock, Jared R.; Zyserman, F. I.; Kalscheuer, Thomas; Thiel, Stephan

    2015-01-01

    Surface-based monitoring of mass transfer caused by injections and extractions in deep boreholes is crucial to maximize oil, gas and geothermal production. Inductive electromagnetic methods, such as magnetotellurics, are appealing for these applications due to their large penetration depths and sensitivity to changes in fluid conductivity and fracture connectivity. In this work, we propose a 3-D Markov chain Monte Carlo inversion of time-lapse magnetotelluric data to image mass transfer following a saline fluid injection. The inversion estimates the posterior probability density function of the resulting plume, and thereby quantifies model uncertainty. To decrease computation times, we base the parametrization on a reduced Legendre moment decomposition of the plume. A synthetic test shows that our methodology is effective when the electrical resistivity structure prior to the injection is well known. The centre of mass and spread of the plume are well retrieved.We then apply our inversion strategy to an injection experiment in an enhanced geothermal system at Paralana, South Australia, and compare it to a 3-D deterministic time-lapse inversion. The latter retrieves resistivity changes that are more shallow than the actual injection interval, whereas the probabilistic inversion retrieves plumes that are located at the correct depths and oriented in a preferential north-south direction. To explain the time-lapse data, the inversion requires unrealistically large resistivity changes with respect to the base model. We suggest that this is partly explained by unaccounted subsurface heterogeneities in the base model from which time-lapse changes are inferred.

  15. Magnetotelluric investigations of the lithosphere beneath the central Rae craton, mainland Nunavut, Canada

    Science.gov (United States)

    Spratt, Jessica E.; Skulski, Thomas; Craven, James A.; Jones, Alan G.; Snyder, David B.; Kiyan, Duygu

    2014-03-01

    New magnetotelluric soundings at 64 locations throughout the central Rae craton on mainland Nunavut constrain 2-D resistivity models of the crust and lithospheric mantle beneath three regional transects. Responses determined from colocated broadband and long-period magnetotelluric recording instruments enabled resistivity imaging to depths of > 300 km. Strike analysis and distortion decomposition on all data reveal a regional trend of 45-53°, but locally the geoelectric strike angle varies laterally and with depth. The 2-D models reveal a resistive upper crust to depths of 15-35 km that is underlain by a conductive layer that appears to be discontinuous at or near major mapped geological boundaries. Surface projections of the conductive layer coincide with areas of high grade, Archean metasedimentary rocks. Tectonic burial of these rocks and thickening of the crust occurred during the Paleoproterozoic Arrowsmith (2.3 Ga) and Trans-Hudson orogenies (1.85 Ga). Overall, the uppermost mantle of the Rae craton shows resistivity values that range from 3000 Ω m in the northeast (beneath Baffin Island and the Melville Peninsula) to 10,000 Ω m beneath the central Rae craton, to >50,000 Ω m in the south near the Hearne Domain. Near-vertical zones of reduced resistivity are identified within the uppermost mantle lithosphere that may be related to areas affected by mantle melt or metasomatism associated with emplacement of Hudsonian granites. A regional decrease in resistivities to values of 500 Ω m at depths of 180-220 km, increasing to 300 km near the southern margin of the Rae craton, is interpreted as the lithosphere-asthenosphere boundary.

  16. Perceived Audio Quality Analysis in Digital Audio Broadcasting Plus System Based on PEAQ

    Directory of Open Access Journals (Sweden)

    K. Ulovec

    2018-04-01

    Full Text Available Broadcasters need to decide on bitrates of the services in the multiplex transmitted via Digital Audio Broadcasting Plus system. The bitrate should be set as low as possible for maximal number of services, but with high quality, not lower than in conventional analog systems. In this paper, the objective method Perceptual Evaluation of Audio Quality is used to analyze the perceived audio quality for appropriate codecs --- MP2 and AAC offering three profiles. The main aim is to determine dependencies on the type of signal --- music and speech, the number of channels --- stereo and mono, and the bitrate. Results indicate that only MP2 codec and AAC Low Complexity profile reach imperceptible quality loss. The MP2 codec needs higher bitrate than AAC Low Complexity profile for the same quality. For the both versions of AAC High-Efficiency profiles, the limit bitrates are determined above which less complex profiles outperform the more complex ones and higher bitrates above these limits are not worth using. It is shown that stereo music has worse quality than stereo speech generally, whereas for mono, the dependencies vary upon the codec/profile. Furthermore, numbers of services satisfying various quality criteria are presented.

  17. Audio-visual biofeedback for respiratory-gated radiotherapy: Impact of audio instruction and audio-visual biofeedback on respiratory-gated radiotherapy

    International Nuclear Information System (INIS)

    George, Rohini; Chung, Theodore D.; Vedam, Sastry S.; Ramakrishnan, Viswanathan; Mohan, Radhe; Weiss, Elisabeth; Keall, Paul J.

    2006-01-01

    Purpose: Respiratory gating is a commercially available technology for reducing the deleterious effects of motion during imaging and treatment. The efficacy of gating is dependent on the reproducibility within and between respiratory cycles during imaging and treatment. The aim of this study was to determine whether audio-visual biofeedback can improve respiratory reproducibility by decreasing residual motion and therefore increasing the accuracy of gated radiotherapy. Methods and Materials: A total of 331 respiratory traces were collected from 24 lung cancer patients. The protocol consisted of five breathing training sessions spaced about a week apart. Within each session the patients initially breathed without any instruction (free breathing), with audio instructions and with audio-visual biofeedback. Residual motion was quantified by the standard deviation of the respiratory signal within the gating window. Results: Audio-visual biofeedback significantly reduced residual motion compared with free breathing and audio instruction. Displacement-based gating has lower residual motion than phase-based gating. Little reduction in residual motion was found for duty cycles less than 30%; for duty cycles above 50% there was a sharp increase in residual motion. Conclusions: The efficiency and reproducibility of gating can be improved by: incorporating audio-visual biofeedback, using a 30-50% duty cycle, gating during exhalation, and using displacement-based gating

  18. Interactive video audio system: communication server for INDECT portal

    Science.gov (United States)

    Mikulec, Martin; Voznak, Miroslav; Safarik, Jakub; Partila, Pavol; Rozhon, Jan; Mehic, Miralem

    2014-05-01

    The paper deals with presentation of the IVAS system within the 7FP EU INDECT project. The INDECT project aims at developing the tools for enhancing the security of citizens and protecting the confidentiality of recorded and stored information. It is a part of the Seventh Framework Programme of European Union. We participate in INDECT portal and the Interactive Video Audio System (IVAS). This IVAS system provides a communication gateway between police officers working in dispatching centre and police officers in terrain. The officers in dispatching centre have capabilities to obtain information about all online police officers in terrain, they can command officers in terrain via text messages, voice or video calls and they are able to manage multimedia files from CCTV cameras or other sources, which can be interesting for officers in terrain. The police officers in terrain are equipped by smartphones or tablets. Besides common communication, they can reach pictures or videos sent by commander in office and they can respond to the command via text or multimedia messages taken by their devices. Our IVAS system is unique because we are developing it according to the special requirements from the Police of the Czech Republic. The IVAS communication system is designed to use modern Voice over Internet Protocol (VoIP) services. The whole solution is based on open source software including linux and android operating systems. The technical details of our solution are presented in the paper.

  19. Horatio Audio-Describes Shakespeare's "Hamlet": Blind and Low-Vision Theatre-Goers Evaluate an Unconventional Audio Description Strategy

    Science.gov (United States)

    Udo, J. P.; Acevedo, B.; Fels, D. I.

    2010-01-01

    Audio description (AD) has been introduced as one solution for providing people who are blind or have low vision with access to live theatre, film and television content. However, there is little research to inform the process, user preferences and presentation style. We present a study of a single live audio-described performance of Hart House…

  20. The Marine Magnetotelluric Method (MMT) applied of hydrocarbons exploration in Brazilian waters; Aplicacao do Metodo Magnetotelurico Marinho (MMT) na exploracao de hidrocarbonetos em aguas brasileiras

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Vinicius R.; Flexor, Jean M.; La Terra, Emanuele F.; Fontes, Sergio L. [Observatorio Nacional do Brasil, Rio de Janeiro, RJ (Brazil); Lugao, Patricia P. [Schlumberger, Rio de Janeiro, RJ (Brazil). Western-Geco

    2008-07-01

    Magnetotellurics (MT) is a natural-source, electromagnetic geophysical method of imaging structures below the earth's surface. It is used to map the subsurface Earth's resistivity by measuring the naturally occurring electric and magnetic fields at the Earth's surface. These natural EM fields are generated in the Earth's atmosphere mainly by lightning strokes and by interactions between the solar wind and the ionosphere. Natural variations in the earth's magnetic field induce electric currents (or telluric currents) under the earth's surface. Concurrent measurements of orthogonal components of the electric and magnetic fields allow for the calculation of the impedance tensor, which is complex and frequency-dependent and from which it is possible to gain insight into the resistivity structure of the surrounding material. The marine magnetotelluric method (MMT) is the application of MT method to investigate the sea-floor resistivity's distribution. A MMT sounding with 96 stations was realized in the region of Santos Basin on a subsalt section to assist the interpretation of seismic data in order to estimate the depth of base of the salt (subsalt) since this imaging in general is problematic. The high contrast of the electrical resistivity between the salt and the surrounding sediments is an excellent objective and it constitutes a great opportunity to test the applicability of the MMT method in oil exploration studies. The geological interpretation of the seismic profile of the studied area shows the existence of several bodies of salt with depths of the base that could vary more from 7000 m to more than 9000 m. The top of the body of more important salt of the profile begins to the 3500 m and your base is not solved by the seismic sign that it reaches a maximum depth of 9000 m. The MMT data of the central profile were submitted an inversion procedure - 2D by using the non linear conjugate gradients that produces smooth models for

  1. Optimized Audio Classification and Segmentation Algorithm by Using Ensemble Methods

    Directory of Open Access Journals (Sweden)

    Saadia Zahid

    2015-01-01

    Full Text Available Audio segmentation is a basis for multimedia content analysis which is the most important and widely used application nowadays. An optimized audio classification and segmentation algorithm is presented in this paper that segments a superimposed audio stream on the basis of its content into four main audio types: pure-speech, music, environment sound, and silence. An algorithm is proposed that preserves important audio content and reduces the misclassification rate without using large amount of training data, which handles noise and is suitable for use for real-time applications. Noise in an audio stream is segmented out as environment sound. A hybrid classification approach is used, bagged support vector machines (SVMs with artificial neural networks (ANNs. Audio stream is classified, firstly, into speech and nonspeech segment by using bagged support vector machines; nonspeech segment is further classified into music and environment sound by using artificial neural networks and lastly, speech segment is classified into silence and pure-speech segments on the basis of rule-based classifier. Minimum data is used for training classifier; ensemble methods are used for minimizing misclassification rate and approximately 98% accurate segments are obtained. A fast and efficient algorithm is designed that can be used with real-time multimedia applications.

  2. Music Genre Classification Using MIDI and Audio Features

    Science.gov (United States)

    Cataltepe, Zehra; Yaslan, Yusuf; Sonmez, Abdullah

    2007-12-01

    We report our findings on using MIDI files and audio features from MIDI, separately and combined together, for MIDI music genre classification. We use McKay and Fujinaga's 3-root and 9-leaf genre data set. In order to compute distances between MIDI pieces, we use normalized compression distance (NCD). NCD uses the compressed length of a string as an approximation to its Kolmogorov complexity and has previously been used for music genre and composer clustering. We convert the MIDI pieces to audio and then use the audio features to train different classifiers. MIDI and audio from MIDI classifiers alone achieve much smaller accuracies than those reported by McKay and Fujinaga who used not NCD but a number of domain-based MIDI features for their classification. Combining MIDI and audio from MIDI classifiers improves accuracy and gets closer to, but still worse, accuracies than McKay and Fujinaga's. The best root genre accuracies achieved using MIDI, audio, and combination of them are 0.75, 0.86, and 0.93, respectively, compared to 0.98 of McKay and Fujinaga. Successful classifier combination requires diversity of the base classifiers. We achieve diversity through using certain number of seconds of the MIDI file, different sample rates and sizes for the audio file, and different classification algorithms.

  3. Music Genre Classification Using MIDI and Audio Features

    Directory of Open Access Journals (Sweden)

    Abdullah Sonmez

    2007-01-01

    Full Text Available We report our findings on using MIDI files and audio features from MIDI, separately and combined together, for MIDI music genre classification. We use McKay and Fujinaga's 3-root and 9-leaf genre data set. In order to compute distances between MIDI pieces, we use normalized compression distance (NCD. NCD uses the compressed length of a string as an approximation to its Kolmogorov complexity and has previously been used for music genre and composer clustering. We convert the MIDI pieces to audio and then use the audio features to train different classifiers. MIDI and audio from MIDI classifiers alone achieve much smaller accuracies than those reported by McKay and Fujinaga who used not NCD but a number of domain-based MIDI features for their classification. Combining MIDI and audio from MIDI classifiers improves accuracy and gets closer to, but still worse, accuracies than McKay and Fujinaga's. The best root genre accuracies achieved using MIDI, audio, and combination of them are 0.75, 0.86, and 0.93, respectively, compared to 0.98 of McKay and Fujinaga. Successful classifier combination requires diversity of the base classifiers. We achieve diversity through using certain number of seconds of the MIDI file, different sample rates and sizes for the audio file, and different classification algorithms.

  4. Distortion-Free 1-Bit PWM Coding for Digital Audio Signals

    Directory of Open Access Journals (Sweden)

    John Mourjopoulos

    2007-01-01

    Full Text Available Although uniformly sampled pulse width modulation (UPWM represents a very efficient digital audio coding scheme for digital-to-analog conversion and full-digital amplification, it suffers from strong harmonic distortions, as opposed to benign non-harmonic artifacts present in analog PWM (naturally sampled PWM, NPWM. Complete elimination of these distortions usually requires excessive oversampling of the source PCM audio signal, which results to impractical realizations of digital PWM systems. In this paper, a description of digital PWM distortion generation mechanism is given and a novel principle for their minimization is proposed, based on a process having some similarity to the dithering principle employed in multibit signal quantization. This conditioning signal is termed “jither” and it can be applied either in the PCM amplitude or the PWM time domain. It is shown that the proposed method achieves significant decrement of the harmonic distortions, rendering digital PWM performance equivalent to that of source PCM audio, for mild oversampling (e.g., ×4 resulting to typical PWM clock rates of 90 MHz.

  5. Distortion-Free 1-Bit PWM Coding for Digital Audio Signals

    Directory of Open Access Journals (Sweden)

    Mourjopoulos John

    2007-01-01

    Full Text Available Although uniformly sampled pulse width modulation (UPWM represents a very efficient digital audio coding scheme for digital-to-analog conversion and full-digital amplification, it suffers from strong harmonic distortions, as opposed to benign non-harmonic artifacts present in analog PWM (naturally sampled PWM, NPWM. Complete elimination of these distortions usually requires excessive oversampling of the source PCM audio signal, which results to impractical realizations of digital PWM systems. In this paper, a description of digital PWM distortion generation mechanism is given and a novel principle for their minimization is proposed, based on a process having some similarity to the dithering principle employed in multibit signal quantization. This conditioning signal is termed "jither" and it can be applied either in the PCM amplitude or the PWM time domain. It is shown that the proposed method achieves significant decrement of the harmonic distortions, rendering digital PWM performance equivalent to that of source PCM audio, for mild oversampling (e.g., resulting to typical PWM clock rates of 90 MHz.

  6. Secondary Analysis of Audio Data. Technical Procedures for Virtual Anonymization and Pseudonymization

    Directory of Open Access Journals (Sweden)

    Henning Pätzold

    2005-01-01

    Full Text Available Qualitative material presented as audio data requires a greater degree of protecting of anonymity than for example textual data. Apart from the verbal content, it carries paraverbal aspects including voice characteristics, thus making it easier to identify the speaker. This complicates secondary analysis or reanalysis conducted by researchers who were not involved in the data collection. Difficulties increase if the chances are high that the researcher and the interviewee come in contact for example through a meeting. This paper describes the technical procedures that are used to modify the sound of the audio source in a way that it reduces the possibility of recognition (i.e. similar to that of a carefully written transcript. A discussion of the technical possibilities of this procedure along with an exploration of the boundaries of anonymization is presented. URN: urn:nbn:de:0114-fqs0501249

  7. Musical examination to bridge audio data and sheet music

    Science.gov (United States)

    Pan, Xunyu; Cross, Timothy J.; Xiao, Liangliang; Hei, Xiali

    2015-03-01

    The digitalization of audio is commonly implemented for the purpose of convenient storage and transmission of music and songs in today's digital age. Analyzing digital audio for an insightful look at a specific musical characteristic, however, can be quite challenging for various types of applications. Many existing musical analysis techniques can examine a particular piece of audio data. For example, the frequency of digital sound can be easily read and identified at a specific section in an audio file. Based on this information, we could determine the musical note being played at that instant, but what if you want to see a list of all the notes played in a song? While most existing methods help to provide information about a single piece of the audio data at a time, few of them can analyze the available audio file on a larger scale. The research conducted in this work considers how to further utilize the examination of audio data by storing more information from the original audio file. In practice, we develop a novel musical analysis system Musicians Aid to process musical representation and examination of audio data. Musicians Aid solves the previous problem by storing and analyzing the audio information as it reads it rather than tossing it aside. The system can provide professional musicians with an insightful look at the music they created and advance their understanding of their work. Amateur musicians could also benefit from using it solely for the purpose of obtaining feedback about a song they were attempting to play. By comparing our system's interpretation of traditional sheet music with their own playing, a musician could ensure what they played was correct. More specifically, the system could show them exactly where they went wrong and how to adjust their mistakes. In addition, the application could be extended over the Internet to allow users to play music with one another and then review the audio data they produced. This would be particularly

  8. Current-Driven Switch-Mode Audio Power Amplifiers

    DEFF Research Database (Denmark)

    Knott, Arnold; Buhl, Niels Christian; Andersen, Michael A. E.

    2012-01-01

    The conversion of electrical energy into sound waves by electromechanical transducers is proportional to the current through the coil of the transducer. However virtually all audio power amplifiers provide a controlled voltage through the interface to the transducer. This paper is presenting...... a switch-mode audio power amplifier not only providing controlled current but also being supplied by current. This results in an output filter size reduction by a factor of 6. The implemented prototype shows decent audio performance with THD + N below 0.1 %....

  9. Dynamically-Loaded Hardware Libraries (HLL) Technology for Audio Applications

    DEFF Research Database (Denmark)

    Esposito, A.; Lomuscio, A.; Nunzio, L. Di

    2016-01-01

    In this work, we apply hardware acceleration to embedded systems running audio applications. We present a new framework, Dynamically-Loaded Hardware Libraries or HLL, to dynamically load hardware libraries on reconfigurable platforms (FPGAs). Provided a library of application-specific processors......, we load on-the-fly the specific processor in the FPGA, and we transfer the execution from the CPU to the FPGA-based accelerator. The proposed architecture provides excellent flexibility with respect to the different audio applications implemented, high quality audio, and an energy efficient solution....

  10. Can audio recording improve patients' recall of outpatient consultations?

    DEFF Research Database (Denmark)

    Wolderslund, Maiken; Kofoed, Poul-Erik; Axboe, Mette

    Introduction In order to give patients possibility to listen to their consultation again, we have designed a system which gives the patients access to digital audio recordings of their consultations. An Interactive Voice Response platform enables the audio recording and gives the patients access...... and those who have not (control).The audio recordings and the interviews are coded according to six themes: Test results, Treatment, Risks, Future tests, Advice and Plan. Afterwards the extent of patients recall is assessed by comparing the accuracy of the patient’s statements (interview...

  11. A review of lossless audio compression standards and algorithms

    Science.gov (United States)

    Muin, Fathiah Abdul; Gunawan, Teddy Surya; Kartiwi, Mira; Elsheikh, Elsheikh M. A.

    2017-09-01

    Over the years, lossless audio compression has gained popularity as researchers and businesses has become more aware of the need for better quality and higher storage demand. This paper will analyse various lossless audio coding algorithm and standards that are used and available in the market focusing on Linear Predictive Coding (LPC) specifically due to its popularity and robustness in audio compression, nevertheless other prediction methods are compared to verify this. Advanced representation of LPC such as LSP decomposition techniques are also discussed within this paper.

  12. Robustness evaluation of transactional audio watermarking systems

    Science.gov (United States)

    Neubauer, Christian; Steinebach, Martin; Siebenhaar, Frank; Pickel, Joerg

    2003-06-01

    Distribution via Internet is of increasing importance. Easy access, transmission and consumption of digitally represented music is very attractive to the consumer but led also directly to an increasing problem of illegal copying. To cope with this problem watermarking is a promising concept since it provides a useful mechanism to track illicit copies by persistently attaching property rights information to the material. Especially for online music distribution the use of so-called transaction watermarking, also denoted with the term bitstream watermarking, is beneficial since it offers the opportunity to embed watermarks directly into perceptually encoded material without the need of full decompression/compression. Besides the concept of bitstream watermarking, former publications presented the complexity, the audio quality and the detection performance. These results are now extended by an assessment of the robustness of such schemes. The detection performance before and after applying selected attacks is presented for MPEG-1/2 Layer 3 (MP3) and MPEG-2/4 AAC bitstream watermarking, contrasted to the performance of PCM spread spectrum watermarking.

  13. Analysis of musical expression in audio signals

    Science.gov (United States)

    Dixon, Simon

    2003-01-01

    In western art music, composers communicate their work to performers via a standard notation which specificies the musical pitches and relative timings of notes. This notation may also include some higher level information such as variations in the dynamics, tempo and timing. Famous performers are characterised by their expressive interpretation, the ability to convey structural and emotive information within the given framework. The majority of work on audio content analysis focusses on retrieving score-level information; this paper reports on the extraction of parameters describing the performance, a task which requires a much higher degree of accuracy. Two systems are presented: BeatRoot, an off-line beat tracking system which finds the times of musical beats and tracks changes in tempo throughout a performance, and the Performance Worm, a system which provides a real-time visualisation of the two most important expressive dimensions, tempo and dynamics. Both of these systems are being used to process data for a large-scale study of musical expression in classical and romantic piano performance, which uses artificial intelligence (machine learning) techniques to discover fundamental patterns or principles governing expressive performance.

  14. Broadband Magnetotelluric Investigations of Crustal Resistivity Structure in North-Eastern Alberta: Implications for Engineered Geothermal Systems

    Science.gov (United States)

    Liddell, M. V.; Unsworth, M. J.; Nieuwenhuis, G.

    2013-12-01

    Greenhouse gas emissions from hydrocarbon consumption produce profound changes in the global climate, and the implementation of alternative energy sources is needed. The oilsands industry in Alberta (Canada) is a major producer of greenhouse gases as natural gas is burnt to produce the heat required to extract and process bitumen. Geothermal energy could be utilized to provide this necessary heat and has the potential to reduce both financial costs and environmental impacts of the oilsands industry. In order to determine the geothermal potential the details of the reservoir must be understood. Conventional hydrothermal reservoirs have been detected using geophysical techniques such as magnetotellurics (MT) which measures the electrical conductivity of the Earth. However, in Northern Alberta the geothermal gradient is relatively low, and heat must be extracted from deep inside the basement rocks using Engineered Geothermal Systems (EGS) and therefore an alternative exploration technique is required. MT can be useful in this context as it can detect fracture zones and regions of elevated porosity. MT data were recorded near Fort McMurray with the goal of determining the geothermal potential by understanding the crustal resistivity structure beneath the Athabasca Oilsands. The MT data are being used to locate targets of significance for geothermal exploration such as regions of low resistivity in the basement rocks which can relate to in situ fluids or fracture zones which can facilitate efficient heat extraction or het transport. A total of 93 stations were collected ~500m apart on two profiles stretching 30 and 20km respectively. Signals were recorded using Phoenix Geophysics V5-2000 systems over frequency bands from 1000 to 0.001 Hz, corresponding to depths of penetration approximately 50m to 50km. Groom-Bailey tensor decomposition and phase tensor analysis shows a well defined geoelectric strike direction that varied along the profile from N60°E to N45

  15. Application of telluric-telluric profiling combined with magnetotelluric and self-potential methods to geothermal exploration in the Fujian Province, China

    Science.gov (United States)

    Pham, Van-Ngoc; Boyer, Danièle; Yuan, Xue Cheng; Liu, Shao Cheng

    1995-05-01

    In the Fujian Province, southeastern China, most of the hot springs emerge in fluviatile valleys and the geothermal resources are mainly medium and low temperature ones by mixing of hot water with cold superficial groundwater. The occurrence of the thermal waters is controlled by deep tectonic fractures in the bedrock where higher-temperature geothermal reservoirs of economic interest are present. The objective of this study is to detect the deeper active hydrothermal zone under a thick sedimentary cover by geoelectrical methods. In the Gui-An site, the combination of telluric-telluric profiling and magnetotelluric methods turns out very efficient to delineate more accurately the width of the deep conductive fracture zone. Moreover, the self-potential method allows us to localize the most active geothermal zone by electrofiltration processes above a convective cell of hot water which flows up from a deep source. The combined results constitute a possible guide for deep geothermal exploration currently encountered in several geothermal regions over the world.

  16. Audio Arduino - an ALSA (Advanced Linux Sound Architecture) audio driver for FTDI-based Arduinos

    DEFF Research Database (Denmark)

    Dimitrov, Smilen; Serafin, Stefania

    2011-01-01

    be considered to be a system, that encompasses design decisions on both hardware and software levels - that also demand a certain understanding of the architecture of the target PC operating system. This project outlines how an Arduino Duemillanove board (containing a USB interface chip, manufactured by Future...... Technology Devices International Ltd [FTDI] company) can be demonstrated to behave as a full-duplex, mono, 8-bit 44.1 kHz soundcard, through an implementation of: a PC audio driver for ALSA (Advanced Linux Sound Architecture); a matching program for the Arduino's ATmega microcontroller - and nothing more...

  17. Advances in audio watermarking based on singular value decomposition

    CERN Document Server

    Dhar, Pranab Kumar

    2015-01-01

    This book introduces audio watermarking methods for copyright protection, which has drawn extensive attention for securing digital data from unauthorized copying. The book is divided into two parts. First, an audio watermarking method in discrete wavelet transform (DWT) and discrete cosine transform (DCT) domains using singular value decomposition (SVD) and quantization is introduced. This method is robust against various attacks and provides good imperceptible watermarked sounds. Then, an audio watermarking method in fast Fourier transform (FFT) domain using SVD and Cartesian-polar transformation (CPT) is presented. This method has high imperceptibility and high data payload and it provides good robustness against various attacks. These techniques allow media owners to protect copyright and to show authenticity and ownership of their material in a variety of applications.   ·         Features new methods of audio watermarking for copyright protection and ownership protection ·         Outl...

  18. Class D audio amplifiers for high voltage capacitive transducers

    DEFF Research Database (Denmark)

    Nielsen, Dennis

    of high volume, weight, and cost. High efficient class D amplifiers are now widely available offering power densities, that their linear counterparts can not match. Unlike the technology of audio amplifiers, the loudspeaker is still based on the traditional electrodynamic transducer invented by C.W. Rice......Audio reproduction systems contains two key components, the amplifier and the loudspeaker. In the last 20 – 30 years the technology of audio amplifiers have performed a fundamental shift of paradigm. Class D audio amplifiers have replaced the linear amplifiers, suffering from the well-known issues...... with the low level of acoustical output power and complex amplifier requirements, have limited the commercial success of the technology. Horn or compression drivers are typically favoured, when high acoustic output power is required, this is however at the expense of significant distortion combined...

  19. Aurally Aided Visual Search Performance Comparing Virtual Audio Systems

    DEFF Research Database (Denmark)

    Larsen, Camilla Horne; Lauritsen, David Skødt; Larsen, Jacob Junker

    2014-01-01

    Due to increased computational power, reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between a HRTF enhanced audio system (3D) and an...... with white dots. The results indicate that 3D audio yields faster search latencies than panning audio, especially with larger amounts of distractors. The applications of this research could fit virtual environments such as video games or virtual simulations.......Due to increased computational power, reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between a HRTF enhanced audio system (3D...

  20. Aurally Aided Visual Search Performance Comparing Virtual Audio Systems

    DEFF Research Database (Denmark)

    Larsen, Camilla Horne; Lauritsen, David Skødt; Larsen, Jacob Junker

    2014-01-01

    Due to increased computational power reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between an HRTF enhanced audio system (3D) and an...... with white dots. The results indicate that 3D audio yields faster search latencies than panning audio, especially with larger amounts of distractors. The applications of this research could fit virtual environments such as video games or virtual simulations.......Due to increased computational power reproducing binaural hearing in real-time applications, through usage of head-related transfer functions (HRTFs), is now possible. This paper addresses the differences in aurally-aided visual search performance between an HRTF enhanced audio system (3D...

  1. Perancangan Sistem Audio Mobil Berbasiskan Sistem Pakar dan Web

    Directory of Open Access Journals (Sweden)

    Djunaidi Santoso

    2011-12-01

    Full Text Available Designing car audio that fits user’s needs is a fun activity. However, the design often consumes more time and costly since it should be consulted to the experts several times. For easy access to information in designing a car audio system as well as error prevention, an car audio system based on expert system and web is designed for those who do not have sufficient time and expense to consult directly to experts. This system consists of tutorial modules designed using the HyperText Preprocessor (PHP and MySQL as database. This car audio system design is evaluated uses black box testing method which focuses on the functional needs of the application. Tests are performed by providing inputs and produce outputs corresponding to the function of each module. The test results prove the correspondence between input and output, which means that the program meet the initial goals of the design. 

  2. Proper Use of Audio-Visual Aids: Essential for Educators.

    Science.gov (United States)

    Dejardin, Conrad

    1989-01-01

    Criticizes educators as the worst users of audio-visual aids and among the worst public speakers. Offers guidelines for the proper use of an overhead projector and the development of transparencies. (DMM)

  3. Ferrite bead effect on Class-D amplifier audio quality

    OpenAIRE

    Haddad , Kevin El; Mrad , Roberto; Morel , Florent; Pillonnet , Gael; Vollaire , Christian; Nagari , Angelo

    2014-01-01

    International audience; This paper studies the effect of ferrite beads on the audio quality of Class-D audio amplifiers. This latter is a switch-ing circuit which creates high frequency harmonics. Generally, a filter is used at the amplifier output for the sake of electro-magnetic compatibility (EMC). So often, in integrated solutions, this filter contains ferrite beads which are magnetic components and present nonlinear behavior. Time domain measurements and their equivalence in frequency do...

  4. Precision Scaling of Neural Networks for Efficient Audio Processing

    OpenAIRE

    Ko, Jong Hwan; Fromm, Josh; Philipose, Matthai; Tashev, Ivan; Zarar, Shuayb

    2017-01-01

    While deep neural networks have shown powerful performance in many audio applications, their large computation and memory demand has been a challenge for real-time processing. In this paper, we study the impact of scaling the precision of neural networks on the performance of two common audio processing tasks, namely, voice-activity detection and single-channel speech enhancement. We determine the optimal pair of weight/neuron bit precision by exploring its impact on both the performance and ...

  5. Design guidelines for audio presentation of graphs and tables

    OpenAIRE

    Brown, L.M.; Brewster, S.A.; Ramloll, S.A.; Burton, R.; Riedel, B.

    2003-01-01

    Audio can be used to make visualisations accessible to blind and visually impaired people. The MultiVis Project has carried out research into suitable methods for presenting graphs and tables to blind people through the use of both speech and non-speech audio. This paper presents guidelines extracted from this research. These guidelines will enable designers to implement visualisation systems for blind and visually impaired users, and will provide a framework for researchers wishing to invest...

  6. El Digital Audio Tape Recorder. Contra autores y creadores

    Directory of Open Access Journals (Sweden)

    Jun Ono

    2015-01-01

    Full Text Available La llamada "DAT" (abreviatura por "digital audio tape recorder" / grabadora digital de audio ha recibido cobertura durante mucho tiempo en los medios masivos de Japón y otros países, como un producto acústico electrónico nuevo y controversial de la industria japonesa de artefactos electrónicos. ¿Qué ha pasado con el objeto de esta controversia?

  7. IELTS speaking instruction through audio/voice conferencing

    Directory of Open Access Journals (Sweden)

    Hamed Ghaemi

    2012-02-01

    Full Text Available The currentstudyaimsatinvestigatingtheimpactofAudio/Voiceconferencing,asanewapproachtoteaching speaking, on the speakingperformanceand/orspeakingband score ofIELTScandidates.Experimentalgroupsubjectsparticipated in an audio conferencing classwhile those of the control group enjoyed attending in a traditional IELTS Speakingclass. At the endofthestudy,allsubjectsparticipatedinanIELTSExaminationheldonNovemberfourthin Tehran,Iran.To compare thegroupmeansforthestudy,anindependentt-testanalysiswasemployed.Thedifferencebetween experimental and control groupwasconsideredtobestatisticallysignificant(P<0.01.Thatisthecandidates in experimental group have outperformed the ones in control group in IELTS Speaking test scores.

  8. Digital signal processing methods and algorithms for audio conferencing systems

    OpenAIRE

    Lindström, Fredric

    2007-01-01

    Today, we are interconnected almost all over the planet. Large multinational companies operate worldwide, but also an increasing number of small and medium sized companies do business overseas. As people travel to meet and do businesses, the already exposed earth is subject to even more strain. Audio conferencing is an attractive alternative to travel, which is becoming more and more appreciated. Audio conferences can of course not replace all types of meetings, but can help companies to cut ...

  9. Video equipment of tele dosimetry and audio

    International Nuclear Information System (INIS)

    Ojeda R, M.A.; Padilla C, I.

    2007-01-01

    To develop a work in an area with high radiation, it requires of a detailed knowledge of the surroundings work, a communication and effective vision, a near dosimetric control. In a work where the spaces variables and reduced accesses exist, noise that hinders the communication, defendant operative condition, radiation field and taking of decision, it is necessary to have tools that allow a total control of the environment to make opportune and effective decisions, there where the task is developed. Under this elementary concept, it was developed in the Laguna Verde Central a project that it allowed a mechanism, interactive of control in spaces complex; to see, to hear, to speak, to measure. This concept takes to the creation of an equipped system with closed circuit of television, wireless communication systems, tele dosimetry wireless systems, VHS and DVD recording equipment, uninterrupted energy units. The system requires of an electric power socket, and the installation of two cables by CCTV camera. The system is mobilized by a person. He puts on in operation in 5 minutes using a verification list. The concept was developed in the project denominated VETA-1, (Video Equipment of Tele dosimetry and Audio). It is objective of this work to present before the society the development of the VETA-1 tool that conclude in their first prototype in May of the present year. The VETA-1 project arises by a necessity of optimizing dose, it is an ALARA tool, with a countless applications, like it was proven in the 12 recharge stop of the Unit 1. The VETA-1 project integrate a recording system, with the primary end of analyzing in the place where the task is developed the details for an effective and opportune decision, but the resulting information is of utility for the personnel's training and the planning of future works. The VETA-1 system is an ALARA tool of quick response control. (Author)

  10. Efficient computational methods for electromagnetic imaging with applications to 3D magnetotellurics

    Science.gov (United States)

    Kordy, Michal Adam

    The motivation for this work is the forward and inverse problem for magnetotellurics, a frequency domain electromagnetic remote-sensing geophysical method used in mineral, geothermal, and groundwater exploration. The dissertation consists of four papers. In the first paper, we prove the existence and uniqueness of a representation of any vector field in H(curl) by a vector lying in H(curl) and H(div). It allows us to represent electric or magnetic fields by another vector field, for which nodal finite element approximation may be used in the case of non-constant electromagnetic properties. With this approach, the system matrix does not become ill-posed for low-frequency. In the second paper, we consider hexahedral finite element approximation of an electric field for the magnetotelluric forward problem. The near-null space of the system matrix for low frequencies makes the numerical solution unstable in the air. We show that the proper solution may obtained by applying a correction on the null space of the curl. It is done by solving a Poisson equation using discrete Helmholtz decomposition. We parallelize the forward code on multicore workstation with large RAM. In the next paper, we use the forward code in the inversion. Regularization of the inversion is done by using the second norm of the logarithm of conductivity. The data space Gauss-Newton approach allows for significant savings in memory and computational time. We show the efficiency of the method by considering a number of synthetic inversions and we apply it to real data collected in Cascade Mountains. The last paper considers a cross-frequency interpolation of the forward response as well as the Jacobian. We consider Pade approximation through model order reduction and rational Krylov subspace. The interpolating frequencies are chosen adaptively in order to minimize the maximum error of interpolation. Two error indicator functions are compared. We prove a theorem of almost always lucky failure in the

  11. An Amphibious Magnetotelluric Investigation of the Cascadian Seismogenic and ETS zones.

    Science.gov (United States)

    Parris, B. A.; Livelybrooks, D.; Bedrosian, P.; Egbert, G. D.; Key, K.; Schultz, A.; Cook, A.; Kant, M.; Wogan, N.; Zeryck, A.

    2015-12-01

    The amphibious Magnetotelluric Observations of Cascadia using a Huge Array (MOCHA) experiment seeks to address unresolved questions about the seismogenic locked zone and down-dip transition zone where episodic tremor and slip (ETS) originates. The presence of free fluids is thought to be one of the primary controls on ETS behavior within the Cascadia margin. Since the bulk electrical conductivity in the crust and mantle can be greatly increased by fluids, magnetotelluric(MT) observations can offer unique insights on the fluid distribution and its relation to observed ETS behavior. Here we present preliminary results from the 146 MT stations collected for the MOCHA project. MOCHA is unique in that it is the first amphibious array of MT stations occupied to provide for 3-D interpretation of conductivity structure of a subduction zone. The MOCHA data set comprises 75 onshore stations and 71 offshore stations, accumulated over a two-year period, and located on an approximate 25km grid, spanning from the trench to the Eastern Willamette Valley, and from central Oregon into middle Washington. We present the results of a series of east-west (cross-strike) oriented, two-dimensional inversions created using the MARE2DEM software that provide an initial picture of the conductivity structure of the locked and ETS zones and its along strike variations. Our models can be used to identify correlations between ETS occurrence rates and inferred fluid concentrations. Our modeling explores the impact of various parameterizations on 2-D inversion results, including inclusion of a smoothness penalty reduction along the inferred slab interface. This series of 2-D inversions can then be used collectively to help make and guide an a priori 3-D inversion. In addition we will present a preliminary 3-D inversion of the onshore stations created using the ModEM software. We are currently working on modifying ModEM to support inversion of offshore data. The more computationally intensive 3-D

  12. A 3D Magnetotelluric Perspective on the Galway Granite, Western Ireland

    Science.gov (United States)

    Farrell, Thomas; Muller, Mark; Vozar, Jan; Feely, Martin; Hogg, Colin

    2017-04-01

    Magnetotelluric (MT) and audi-magnetotelluric (AMT) data were acquired at 75 locations across the exposed calc-alkaline Caledonian Galway granite batholith and surrounding country rocks into which the granite intruded. The Galway granite is located in western Ireland on the north shore of Galway bay, and has an ESE-WNW long axis. The granite is cut by trans-batholith faults, the Shannawona Fault Zone (SFZ) in the western part of the batholith, which has a NE-SW trend, and the Bearna Fault Zone (BFZ) in the eastern sector that has a NW-SE trend. Geobarometry data indicate that the central granite block between these fault zones has been uplifted, with the interpretation being that the granite in this central block is thinned. To the west of the SFZ, much of the Galway granite is below sea level, with the majority of the southern granite contact also beneath the sea in Galway bay. To the east of the batholith, the Carboniferous successions, consisting of mainly limestone with shale, overlie the basement rocks. The country rock to the north includes the metagabbro-gneiss suite, which itself intruded the deformed Dalradian successions that were deposited on the Laurentian margin of the Iapetus Ocean. The deformation of the Dalradian rocks, the intrusion of the metagabbro-gneiss suite and the intrusion of the Galway granite were major events in the protracted closure of the Iapetus Ocean. It is clear from geological mapping, from geobarometry and from the present submergence by the sea of a large part of the Galway granite, that inversion of MT data in this structurally complex geology is likely to require a 3D approach. We present a summary of 3D inversion of the Galway MT and AMT data. The study shows that the structure of the Galway granite is quite different from the pre-existing perspective. The central block, thought by its uplifting to be thinned, is shown to be the thickest part of the batholith. A geological model of granite intrusion is offered to explain this

  13. AUTOMATIC SEGMENTATION OF BROADCAST AUDIO SIGNALS USING AUTO ASSOCIATIVE NEURAL NETWORKS

    Directory of Open Access Journals (Sweden)

    P. Dhanalakshmi

    2010-12-01

    Full Text Available In this paper, we describe automatic segmentation methods for audio broadcast data. Today, digital audio applications are part of our everyday lives. Since there are more and more digital audio databases in place these days, the importance of effective management for audio databases have become prominent. Broadcast audio data is recorded from the Television which comprises of various categories of audio signals. Efficient algorithms for segmenting the audio broadcast data into predefined categories are proposed. Audio features namely Linear prediction coefficients (LPC, Linear prediction cepstral coefficients, and Mel frequency cepstral coefficients (MFCC are extracted to characterize the audio data. Auto Associative Neural Networks are used to segment the audio data into predefined categories using the extracted features. Experimental results indicate that the proposed algorithms can produce satisfactory results.

  14. Magnetotelluric Imaging of the Lithosphere Across the Variscan Orogen (Iberian Autochthonous Domain, NW Iberia)

    Science.gov (United States)

    Alves Ribeiro, J.; Monteiro-Santos, F. A.; Pereira, M. F.; Díez Fernández, R.; Dias da Silva, Í.; Nascimento, C.; Silva, J. B.

    2017-12-01

    A new magnetotelluric (MT) survey comprising 17 MT soundings throughout a 30 km long N30°W transect in the Iberian autochthons domain of NW Iberia (Central Iberian Zone) is presented. The 2-D inversion model shows the resistivity structure of the continental crust up to 10 km depth, heretofore unavailable for this region of the Variscan Orogen. The MT model reveals a wavy structure separating a conductive upper layer underlain by a resistive layer, thus picturing the two main tectonic blocks of a large-scale D2 extensional shear zone (i.e., Pinhel shear zone). The upper layer represents a lower grade metamorphic domain that includes graphite-rich rocks. The lower layer consists of high-grade metamorphic rocks that experienced partial melting and are associated with granites (more resistive) emplaced during crustal thinning. The wavy structure is the result of superimposed crustal shortening responsible for the development of large-scale D3 folds (e.g., Marofa synform), later deflected and refolded by a D4 strike-slip shear zone (i.e., Juzbado-Penalva do Castelo shear zone). The later contribution to the final structure of the crust is marked by the intrusion of postkinematic granitic rocks and the propagation of steeply dipping brittle fault zones. Our study demonstrates that MT imaging is a powerful tool to understand complex crustal structures of ancient orogens in order to design future prospecting surveys for mineral deposits of economic interest.

  15. Ocean coast effect on magnetotelluric data: a case study from Kachchh, India

    Science.gov (United States)

    Pandey, Dhananjai; Sinha, Martin; MacGregor, Lucy; Singh, Satish

    2008-09-01

    The effects of the ocean coast on magnetotelluric (MT) data have been studied and results are described in this article. MT soundings from various sites along coastal plains of Kachchh were acquired where volcanic rocks overlie Mesozoic sediments having potential resource prospects. The region of our study lies in the proximity of Gulf of Kachchh and Arabian Sea. This article describes the effects the presence of a conductive body on the acquired MT data. With the help of synthetic MT modelling and induction arrows we demonstrate the influence of shallow conductive body on the MT data. The modelling results when compared to the field observations show that much of the high frequencies are unaffected by the coast, however low frequencies of the data do seem to be distorted by onshore offshore resistivity contrasts. The least affect on high frequencies can be attributed to very shallow water depth as well as to the fact that the onshore offshore resistivity contrasts are not large enough to influence the high frequency data badly. The results presented here report for the first time the effect of the coast on the analysis on MT data from Kachchh. Due to several academic as well as industrial onshore offshore MT experiments presently being carried out to explore its hydrocarbon potential, our results have an important bearing on designing and acquisition of future MT surveys in this region.

  16. Resistivity imaging of Aluto-Langano geothermal field using 3-D magnetotelluric inversion

    Science.gov (United States)

    Cherkose, Biruk Abera; Mizunaga, Hideki

    2018-03-01

    Magnetotelluric (MT) method is a widely used geophysical method in geothermal exploration. It is used to image subsurface resistivity structures from shallow depths up to several kilometers of depth. Resistivity imaging using MT method in high-enthalpy geothermal systems is an effective tool to identify conductive clay layers that cover the geothermal systems and to detect a potential reservoir. A resistivity model is vital for deciding the location of pilot and production sites at the early stages of a geothermal project. In this study, a 3-D resistivity model of Aluto-Langano geothermal field was constructed to map structures related to a geothermal resource. The inversion program, ModEM was used to recover the 3-D resistivity model of the study area. The 3-D inversion result revealed the three main resistivity structures: a high-resistivity surface layer related to unaltered volcanic rocks at shallow depth, underlain by a conductive zone associated with the presence of conductive clay minerals, predominantly smectite. Beneath the conductive layer, the resistivity increases gradually to higher values related to the formation of high-temperature alteration minerals such as chlorite and epidote. The resistivity model recovered from 3-D inversion in Aluto-Langano corresponds very well to the conceptual model for high-enthalpy volcanic geothermal systems. The conductive clay cap is overlying the resistive propylitic upflow zone as confirmed by the geothermal wells in the area.

  17. Canonical decomposition of magnetotelluric responses: Experiment on 1D anisotropic structures

    Science.gov (United States)

    Guo, Ze-qiu; Wei, Wen-bo; Ye, Gao-feng; Jin, Sheng; Jing, Jian-en

    2015-08-01

    Horizontal electrical heterogeneity of subsurface earth is mostly originated from structural complexity and electrical anisotropy, and local near-surface electrical heterogeneity will severely distort regional electromagnetic responses. Conventional distortion analyses for magnetotelluric soundings are primarily physical decomposition methods with respect to isotropic models, which mostly presume that the geoelectric distribution of geological structures is of local and regional patterns represented by 3D/2D models. Due to the widespread anisotropy of earth media, the confusion between 1D anisotropic responses and 2D isotropic responses, and the defects of physical decomposition methods, we propose to conduct modeling experiments with canonical decomposition in terms of 1D layered anisotropic models, and the method is one of the mathematical decomposition methods based on eigenstate analyses differentiated from distortion analyses, which can be used to recover electrical information such as strike directions, and maximum and minimum conductivity. We tested this method with numerical simulation experiments on several 1D synthetic models, which turned out that canonical decomposition is quite effective to reveal geological anisotropic information. Finally, for the background of anisotropy from previous study by geological and seismological methods, canonical decomposition is applied to real data acquired in North China Craton for 1D anisotropy analyses, and the result shows that, with effective modeling and cautious interpretation, canonical decomposition could be another good method to detect anisotropy of geological media.

  18. Three-Dimensional Magnetotelluric Imaging of the Cascadia Subduction Zone with an Amphibious Array

    Science.gov (United States)

    Egbert, G. D.; Yang, B.; Bedrosian, P.; Kelbert, A.; Key, K.; Livelybrooks, D.; Parris, B. A.; Schultz, A.

    2017-12-01

    We present results from three-dimensional inversion of an amphibious magnetotelluric (MT) array consisting of 71 offshore and 75 onshore sites in the central part of Cascadia, to image down-dip and along strike variations of electrical conductivity, and to constrain the 3D distribution of fluids and melt in the subduction zone. The array is augmented by EarthScope TA MT data and legacy 2D profiles providing sparser coverage of western WA, OR, and northern CA. The prior model for the inversion includes ocean bathymetry, conductive marine sediments, and a resistive subducting plate, with geometry derived from the model of McCrory et al. (2012) and seismic tomography. Highly conductive features appear just above the interface with the a priori resistive plate in three zones. (1) In the area with marine MT data a conductive layer, which we associate with fluid-rich decollement and subduction channel sediments, extends eastward from the trench to underthrust the seaward edge of Siletzia, which is clearly seen as a thick crustal resistor. The downdip extent of the underthrust conductive layer is a remarkably uniform 35 km. (2) High conductivities, consistent with metamorphic fluids associated with eclogitization, occur near the forearc mantle corner. Conductivity is highly variable along strike, organized in a series of E-W to diagonal elongated conductive/resistive structures, whose significance remains enigmatic. (3) High conductivities associated with fluids and melts are found in the backarc, again exhibiting substantial along strike variability.

  19. 3-D interpretation of short-period magnetotelluric data at Furnas Volcano, Azores Islands

    Science.gov (United States)

    Hogg, C.; Kiyan, D.; Rath, V.; Byrdina, S.; Vandemeulebrouck, J.; Revil, A.; Viveiros, F.; Carmo, R.; Silva, C.; Ferreira, T.

    2018-04-01

    Accurate geophysical imaging of shallow subsurface features provides crucial constraints on understanding the dynamics of volcanic systems. At Furnas Volcano (Azores), intense circulation of volcanic fluids at depth leading to high CO2 outgassing and flank destabilization poses considerable threat to the local population. Presented is a novel 3-D electrical resistivity model developed from 39 magnetotelluric soundings that images the hydrothermal system of the Furnas Volcano to a depth of 1 km. The resistivity model images two conductive zones, one at 100 m and another at 500 m depth, separated by a resistive layer. The shallow conductor has conductivity less than 1 S m-1, which can be explained by clay mineral surface conduction with a mass fraction of at least 20 per cent smectite. The deeper conductor extends across the majority of the survey area. This deeper conductor is located at depths where smectite is generally replaced by chlorite and we interpret it as aqueous fluids near the boiling point and infer temperatures of at least 240 °C. The less conductive layer found between these conductors is probably steam-dominated, and coincides within the mixed-clay zone found in many volcanic hydrothermal systems.

  20. Imaging an off-axis volcanic field in the Main Ethiopian Rift using 3-D magnetotellurics

    Science.gov (United States)

    Huebert, J.; Whaler, K. A.; Fisseha, S.; Hogg, C.

    2017-12-01

    In active continental rifts, asthenospheric upwelling and crustal thinning result in the ascent of melt through the crust to the surface. In the Main Ethiopian Rift (MER), most volcanic activity is located in magmatic segments in the rift centre, but there are areas of significant off-axis magmatism as well. The Butajira volcanic field is part of the Silti Debre Zeyt Fault (SDZF) zone in the western Main Ethiopian Rift. It is characterized by densely clustered volcanic vents (mostly scoria cones) and by limited seismic activity, which is mainly located along the big border faults that form the edge of a steep escarpment. Seismic P-Wave tomography reveals a crustal low velocity anomaly in this area. We present newly collected Magnetotelluric (MT) data to image the electrical conductivity structure of the area. We deployed 12 LMT instruments and 27 broadband stations in the western flank of the rift to further investigate the along-rift and depth extent of a highly conductive region under the SDZF which was previously identified by MT data collected on the central volcano Aluto and along a cross-rift transverse. This large conductor was interpreted as potential pathways for magma and fluid in the crust. MT Stations were positioned in five NW-SE running 50 km long profiles, covering overall 100km along the rift and providing good coverage for a 3-D inversion of the data to image this enigmatic area of the MER.

  1. Magnetotelluric images of deep crustal structure of the Rehai geothermal field near Tengchong, southern China

    Science.gov (United States)

    Bai, Denghai; Meju, Maxwell A.; Liao, Zhijie

    2001-12-01

    Broadband (0.004-4096s) magnetotelluric (MT) soundings have been applied to the determination of the deep structure across the Rehai geothermal field in a Quaternary volcanic area near the Indo-Eurasian collisional margin. Tensorial analysis of the data show evidence of weak to strong 3-D effects but for approximate 2-D imaging, we obtained dual-mode MT responses for an assumed strike direction coincident with the trend of the regional-scale faults and with the principal impedance azimuth at long periods. The data were subsequently inverted using different approaches. The rapid relaxation inversion models are comparable to the sections constructed from depth-converted invariant impedance phase data. The results from full-domain 2-D conjugate-gradient inversion with different initial models are concordant and evoke a picture of a dome-like structure consisting of a conductive (50-1000 Ωm) cap which is about 5-6km thick in the central part of the known geothermal field and thickens outwards to about 15-20km. The anomalous structure rests on a mid-crustal zone of 20-30 Ωm resistivity extending down to about 25km depth where there appears to be a moderately resistive (>30 Ωm) substratum. The MT images are shown to be in accord with published geological, isotopic and geochemical results that suggested the presence of a magma body underneath the area of study.

  2. Generalized analytic solutions and response characteristics of magnetotelluric fields on anisotropic infinite faults

    Science.gov (United States)

    Bing, Xue; Yicai, Ji

    2018-06-01

    In order to understand directly and analyze accurately the detected magnetotelluric (MT) data on anisotropic infinite faults, two-dimensional partial differential equations of MT fields are used to establish a model of anisotropic infinite faults using the Fourier transform method. A multi-fault model is developed to expand the one-fault model. The transverse electric mode and transverse magnetic mode analytic solutions are derived using two-infinite-fault models. The infinite integral terms of the quasi-analytic solutions are discussed. The dual-fault model is computed using the finite element method to verify the correctness of the solutions. The MT responses of isotropic and anisotropic media are calculated to analyze the response functions by different anisotropic conductivity structures. The thickness and conductivity of the media, influencing MT responses, are discussed. The analytic principles are also given. The analysis results are significant to how MT responses are perceived and to the data interpretation of the complex anisotropic infinite faults.

  3. Processing of noisy magnetotelluric time series from Koyna-Warna seismic region, India: a systematic approach

    Directory of Open Access Journals (Sweden)

    Ujjal K. Borah

    2015-06-01

    Full Text Available Rolling array pattern broad band magnetotelluric (MT data was acquired in the Koyna-Warna (Maharashtra, India seismic zone during 2012-14 field campaigns. The main objective of this study is to identify the thickness of the Deccan trap in and around the Koyna-Warna seismic zone and to delineate the electrical nature of the sub-basalt. The MT data at many places got contaminated with high tension power line noise due to Koyna hydroelectric power project. So, in the present study an attempt has been made to tackle this problem due to 50 Hz noise and their harmonics and other cultural noise using commercially available processing software MAPROS. Remote site was running during the entire field period to stand against the cultural noise problem. This study is based on Fast Fourier Transform (FFT and mainly focuses on the behaviour of different processing parameters, their interrelations and the influences of different processing methods concerning improvement of the S/N ratio of noisy data. Our study suggests that no single processing approach can give desirable transfer functions, however combination of different processing approaches may be adopted while processing culturally affected noisy data.

  4. Probabilistic Magnetotelluric Inversion with Adaptive Regularisation Using the No-U-Turns Sampler

    Science.gov (United States)

    Conway, Dennis; Simpson, Janelle; Didana, Yohannes; Rugari, Joseph; Heinson, Graham

    2018-04-01

    We present the first inversion of magnetotelluric (MT) data using a Hamiltonian Monte Carlo algorithm. The inversion of MT data is an underdetermined problem which leads to an ensemble of feasible models for a given dataset. A standard approach in MT inversion is to perform a deterministic search for the single solution which is maximally smooth for a given data-fit threshold. An alternative approach is to use Markov Chain Monte Carlo (MCMC) methods, which have been used in MT inversion to explore the entire solution space and produce a suite of likely models. This approach has the advantage of assigning confidence to resistivity models, leading to better geological interpretations. Recent advances in MCMC techniques include the No-U-Turns Sampler (NUTS), an efficient and rapidly converging method which is based on Hamiltonian Monte Carlo. We have implemented a 1D MT inversion which uses the NUTS algorithm. Our model includes a fixed number of layers of variable thickness and resistivity, as well as probabilistic smoothing constraints which allow sharp and smooth transitions. We present the results of a synthetic study and show the accuracy of the technique, as well as the fast convergence, independence of starting models, and sampling efficiency. Finally, we test our technique on MT data collected from a site in Boulia, Queensland, Australia to show its utility in geological interpretation and ability to provide probabilistic estimates of features such as depth to basement.

  5. The Fungible Audio-Visual Mapping and its Experience

    Directory of Open Access Journals (Sweden)

    Adriana Sa

    2014-12-01

    Full Text Available This article draws a perceptual approach to audio-visual mapping. Clearly perceivable cause and effect relationships can be problematic if one desires the audience to experience the music. Indeed perception would bias those sonic qualities that fit previous concepts of causation, subordinating other sonic qualities, which may form the relations between the sounds themselves. The question is, how can an audio-visual mapping produce a sense of causation, and simultaneously confound the actual cause-effect relationships. We call this a fungible audio-visual mapping. Our aim here is to glean its constitution and aspect. We will report a study, which draws upon methods from experimental psychology to inform audio-visual instrument design and composition. The participants are shown several audio-visual mapping prototypes, after which we pose quantitative and qualitative questions regarding their sense of causation, and their sense of understanding the cause-effect relationships. The study shows that a fungible mapping requires both synchronized and seemingly non-related components – sufficient complexity to be confusing. As the specific cause-effect concepts remain inconclusive, the sense of causation embraces the whole. 

  6. Imagination and Modern Audio Visual Form

    Directory of Open Access Journals (Sweden)

    Ana Đurković

    2017-09-01

    Full Text Available Through three episodes Archetype of modern fairy tales, the mysterious world of fantasy and reality,tell as a serious story about archetypes, symbols, knowledge of good and evil. Rts editor: Natasa Neskovic Written and directed by: Suncica Jergovic Editing: Ana Djurkovic How to illuminate concept of phantasy and affective factors in our imagination a priori something so imaginary, by their genetic provenance, such as a movie scene, or digital picture and sound. You can not always avoid the association to a valid phrase of arnhajm’s truth: mass age -massage: the medium is the message. In elementary and tersely definition of „the shot“ from Plaževsky film language there is term for „le cadre“, however these are selected bits of reality, immanent frame that contains the individual act of images divided of the continent’s view of reality, handling the specific code of semantic value, when its’s imaginative, of course, by aesthetic categories and evaluations. In this type of positive simulacrum, it can not be better segment for the current thinking about the limits of imagination and truth in contemporary media, and contemporary global environment, than the original audio-visual forms through whose prism we search throught a fairy tale in a same time myth and imagination as well as exploring its overall impact on the personality. Everything can be a fairy tale, even false, amoral platitudes politicized by political lobbies in a contemporary existing power sistems, but this is no fairy tale authenticity in it, or creative act, nor humanity and artificial and historical entity of a man that is always present in the ethical effort of a true artist. So, we are investigating the conditions of creative images, modalities of audiovisual media in film language,and it is the archetype of the fairy tale, which, with its psychodynamics still exists and which is removed when the modern man is tired of lies and simulations during his global

  7. Blind speech separation system for humanoid robot with FastICA for audio filtering and separation

    Science.gov (United States)

    Budiharto, Widodo; Santoso Gunawan, Alexander Agung

    2016-07-01

    Nowadays, there are many developments in building intelligent humanoid robot, mainly in order to handle voice and image. In this research, we propose blind speech separation system using FastICA for audio filtering and separation that can be used in education or entertainment. Our main problem is to separate the multi speech sources and also to filter irrelevant noises. After speech separation step, the results will be integrated with our previous speech and face recognition system which is based on Bioloid GP robot and Raspberry Pi 2 as controller. The experimental results show the accuracy of our blind speech separation system is about 88% in command and query recognition cases.

  8. Solar quiet day ionospheric source current in the West African region

    OpenAIRE

    Obiekezie, Theresa N.; Okeke, Francisca N.

    2012-01-01

    The Solar Quiet (Sq) day source current were calculated using the magnetic data obtained from a chain of 10 magnetotelluric stations installed in the African sector during the French participation in the International Equatorial Electrojet Year (IEEY) experiment in Africa. The components of geomagnetic field recorded at the stations from January–December in 1993 during the experiment were separated into the source and (induced) components of Sq using Spherical Harmonics Analysis (SHA) method....

  9. One Message, Many Voices: Mobile Audio Counselling in Health Education.

    Science.gov (United States)

    Pimmer, Christoph; Mbvundula, Francis

    2018-01-01

    Health workers' use of counselling information on their mobile phones for health education is a central but little understood phenomenon in numerous mobile health (mHealth) projects in Sub-Saharan Africa. Drawing on empirical data from an interpretive case study in the setting of the Millennium Villages Project in rural Malawi, this research investigates the ways in which community health workers (CHWs) perceive that audio-counselling messages support their health education practice. Three main themes emerged from the analysis: phone-aided audio counselling (1) legitimises the CHWs' use of mobile phones during household visits; (2) helps CHWs to deliver a comprehensive counselling message; (3) supports CHWs in persuading communities to change their health practices. The findings show the complexity and interplay of the multi-faceted, sociocultural, political, and socioemotional meanings associated with audio-counselling use. Practical implications and the demand for further research are discussed.

  10. Efficiency Optimization in Class-D Audio Amplifiers

    DEFF Research Database (Denmark)

    Yamauchi, Akira; Knott, Arnold; Jørgensen, Ivan Harald Holger

    2015-01-01

    This paper presents a new power efficiency optimization routine for designing Class-D audio amplifiers. The proposed optimization procedure finds design parameters for the power stage and the output filter, and the optimum switching frequency such that the weighted power losses are minimized under...... the given constraints. The optimization routine is applied to minimize the power losses in a 130 W class-D audio amplifier based on consumer behavior investigations, where the amplifier operates at idle and low power levels most of the time. Experimental results demonstrate that the optimization method can...... lead to around 30 % of efficiency improvement at 1.3 W output power without significant effects on both audio performance and the efficiency at high power levels....

  11. Four-quadrant flyback converter for direct audio power amplification

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.; Andersen, Michael A.E.

    2005-07-01

    This paper presents a bidirectional, four-quadrant yback converter for use in direct audio power amplication. When compared to the standard Class-D switching-mode audio power amplier with separate power supply, the proposed four-quadrant flyback converter provides simple and compact solution with high efciency, higher level of integration, lower component count, less board space and eventually lower cost. Both peak and average current-mode control for use with 4Q flyback power converters are described and compared. Integrated magnetics is presented which simplies the construction of the auxiliary power supplies for control biasing and isolated gate drives. The feasibility of the approach is proven on audio power amplier prototype for subwoofer applications. (au)

  12. Sistema de adquisición y procesamiento de audio

    OpenAIRE

    Pérez Segurado, Rubén

    2015-01-01

    El objetivo de este proyecto es el diseño y la implementación de una plataforma para un sistema de procesamiento de audio. El sistema recibirá una señal de audio analógica desde una fuente de audio, permitirá realizar un tratamiento digital de dicha señal y generará una señal procesada que se enviará a unos altavoces externos. Para la realización del sistema de procesamiento se empleará: - Un dispositivo FPGA de Lattice, modelo MachX02-7000-HE, en la cual estarán todas la...

  13. Music Identification System Using MPEG-7 Audio Signature Descriptors

    Science.gov (United States)

    You, Shingchern D.; Chen, Wei-Hwa; Chen, Woei-Kae

    2013-01-01

    This paper describes a multiresolution system based on MPEG-7 audio signature descriptors for music identification. Such an identification system may be used to detect illegally copied music circulated over the Internet. In the proposed system, low-resolution descriptors are used to search likely candidates, and then full-resolution descriptors are used to identify the unknown (query) audio. With this arrangement, the proposed system achieves both high speed and high accuracy. To deal with the problem that a piece of query audio may not be inside the system's database, we suggest two different methods to find the decision threshold. Simulation results show that the proposed method II can achieve an accuracy of 99.4% for query inputs both inside and outside the database. Overall, it is highly possible to use the proposed system for copyright control. PMID:23533359

  14. Music Identification System Using MPEG-7 Audio Signature Descriptors

    Directory of Open Access Journals (Sweden)

    Shingchern D. You

    2013-01-01

    Full Text Available This paper describes a multiresolution system based on MPEG-7 audio signature descriptors for music identification. Such an identification system may be used to detect illegally copied music circulated over the Internet. In the proposed system, low-resolution descriptors are used to search likely candidates, and then full-resolution descriptors are used to identify the unknown (query audio. With this arrangement, the proposed system achieves both high speed and high accuracy. To deal with the problem that a piece of query audio may not be inside the system’s database, we suggest two different methods to find the decision threshold. Simulation results show that the proposed method II can achieve an accuracy of 99.4% for query inputs both inside and outside the database. Overall, it is highly possible to use the proposed system for copyright control.

  15. Technical Evaluation Report 31: Internet Audio Products (3/ 3

    Directory of Open Access Journals (Sweden)

    Jim Rudolph

    2004-08-01

    Full Text Available Two contrasting additions to the online audio market are reviewed: iVocalize, a browser-based audio-conferencing software, and Skype, a PC-to-PC Internet telephone tool. These products are selected for review on the basis of their success in gaining rapid popular attention and usage during 2003-04. The iVocalize review emphasizes the product’s role in the development of a series of successful online audio communities – notably several serving visually impaired users. The Skype review stresses the ease with which the product may be used for simultaneous PC-to-PC communication among up to five users. Editor’s Note: This paper serves as an introduction to reports about online community building, and reviews of online products for disabled persons, in the next ten reports in this series. JPB, Series Ed.

  16. Ground deformation source model at Kuchinoerabu-jima volcano during 2006-2014 as revealed by campaign GPS observation

    Science.gov (United States)

    Hotta, Kohei; Iguchi, Masato

    2017-12-01

    We analyzed campaign Global Positioning System observation data in Kuchinoerabu-jima during 2006-2014. Most benchmarks located around Shin-dake crater showed crater-centered radial horizontal displacements. Horizontal displacements at western rim of the Shin-dake crater were tended to be larger compared to those at eastern rim. In addition, benchmark KUC14 which locates near the cliff at Furu-dake showed westward horizontal displacement rather than crater-centered radial (southward) one. Meanwhile, small displacements were detected at the benchmarks located at the foot of Kuchinoerabu-jima. We modeled the observed displacements applying a finite element method. We set entire FE domain as 100 × 100 × 50 km3. We set top of the domain as a free surface, and sides and bottom to be fixed boundaries. Topography was introduced in the area within Kuchinoerabu-jima using digital elevation model data provided by Kagoshima prefecture and elevation information from Google earth, and elevation of the outside area was assumed to be sea level. We assumed a stratified structure based on a one-dimensional P-wave velocity structure. We applied a vertical spheroid source model and searched optimal values of horizontal location, depth, equatorial and polar radiuses, and internal pressure change of the source using the forward modeling method. A spherical source with a radius of 50 m was obtained beneath the Shin-dake crater at a depth of 400 m above sea level. The internal pressure increase of 361 MPa yields its volume increase of 31,700 m3. Taking effects of topography and heterogeneity of ground into account allowed reproduction of overall deformation in Kuchinoerabu-jima. The location of deformation source coincides with hypocenters of shallow volcano-tectonic (VT) earthquakes and the aquifer estimated from a two-dimensional resistivity model by audio-frequency magnetotellurics method. The obtained deformation source may be corresponding to the pressurized aquifer, and shallow VT

  17. 3D inversion based on multi-grid approach of magnetotelluric data from Northern Scandinavia

    Science.gov (United States)

    Cherevatova, M.; Smirnov, M.; Korja, T. J.; Egbert, G. D.

    2012-12-01

    In this work we investigate the geoelectrical structure of the cratonic margin of Fennoscandian Shield by means of magnetotelluric (MT) measurements carried out in Northern Norway and Sweden during summer 2011-2012. The project Magnetotellurics in the Scandes (MaSca) focuses on the investigation of the crust, upper mantle and lithospheric structure in a transition zone from a stable Precambrian cratonic interior to a passive continental margin beneath the Caledonian Orogen and the Scandes Mountains in western Fennoscandia. Recent MT profiles in the central and southern Scandes indicated a large contrast in resistivity between Caledonides and Precambrian basement. The alum shales as a highly conductive layers between the resistive Precambrian basement and the overlying Caledonian nappes are revealed from this profiles. Additional measurements in the Northern Scandes were required. All together data from 60 synchronous long period (LMT) and about 200 broad band (BMT) sites were acquired. The array stretches from Lofoten and Bodo (Norway) in the west to Kiruna and Skeleftea (Sweden) in the east covering an area of 500x500 square kilometers. LMT sites were occupied for about two months, while most of the BMT sites were measured during one day. We have used new multi-grid approach for 3D electromagnetic (EM) inversion and modelling. Our approach is based on the OcTree discretization where the spatial domain is represented by rectangular cells, each of which might be subdivided (recursively) into eight sub-cells. In this simplified implementation the grid is refined only in the horizontal direction, uniformly in each vertical layer. Using multi-grid we manage to have a high grid resolution near the surface (for instance, to tackle with galvanic distortions) and lower resolution at greater depth as the EM fields decay in the Earth according to the diffusion equation. We also have a benefit in computational costs as number of unknowns decrease. The multi-grid forward

  18. Sharp Boundary Inversion of 2D Magnetotelluric Data using Bayesian Method.

    Science.gov (United States)

    Zhou, S.; Huang, Q.

    2017-12-01

    Normally magnetotelluric(MT) inversion method cannot show the distribution of underground resistivity with clear boundary, even if there are obviously different blocks. Aiming to solve this problem, we develop a Bayesian structure to inverse 2D MT sharp boundary data, using boundary location and inside resistivity as the random variables. Firstly, we use other MT inversion results, like ModEM, to analyze the resistivity distribution roughly. Then, we select the suitable random variables and change its data format to traditional staggered grid parameters, which can be used to do finite difference forward part. Finally, we can shape the posterior probability density(PPD), which contains all the prior information and model-data correlation, by Markov Chain Monte Carlo(MCMC) sampling from prior distribution. The depth, resistivity and their uncertainty can be valued. It also works for sensibility estimation. We applied the method to a synthetic case, which composes two large abnormal blocks in a trivial background. We consider the boundary smooth and the near true model weight constrains that mimic joint inversion or constrained inversion, then we find that the model results a more precise and focused depth distribution. And we also test the inversion without constrains and find that the boundary could also be figured, though not as well. Both inversions have a good valuation of resistivity. The constrained result has a lower root mean square than ModEM inversion result. The data sensibility obtained via PPD shows that the resistivity is the most sensible, center depth comes second and both sides are the worst.

  19. Ultra-low power high precision magnetotelluric receiver array based customized computer and wireless sensor network

    Science.gov (United States)

    Chen, R.; Xi, X.; Zhao, X.; He, L.; Yao, H.; Shen, R.

    2016-12-01

    Dense 3D magnetotelluric (MT) data acquisition owns the benefit of suppressing the static shift and topography effect, can achieve high precision and high resolution inversion for underground structure. This method may play an important role in mineral exploration, geothermal resources exploration, and hydrocarbon exploration. It's necessary to reduce the power consumption greatly of a MT signal receiver for large-scale 3D MT data acquisition while using sensor network to monitor data quality of deployed MT receivers. We adopted a series of technologies to realized above goal. At first, we designed an low-power embedded computer which can couple with other parts of MT receiver tightly and support wireless sensor network. The power consumption of our embedded computer is less than 1 watt. Then we designed 4-channel data acquisition subsystem which supports 24-bit analog-digital conversion, GPS synchronization, and real-time digital signal processing. Furthermore, we developed the power supply and power management subsystem for MT receiver. At last, a series of software, which support data acquisition, calibration, wireless sensor network, and testing, were developed. The software which runs on personal computer can monitor and control over 100 MT receivers on the field for data acquisition and quality control. The total power consumption of the receiver is about 2 watts at full operation. The standby power consumption is less than 0.1 watt. Our testing showed that the MT receiver can acquire good quality data at ground with electrical dipole length as 3 m. Over 100 MT receivers were made and used for large-scale geothermal exploration in China with great success.

  20. Resistivity characterisation of Hakone volcano, Central Japan, by three-dimensional magnetotelluric inversion

    Science.gov (United States)

    Yoshimura, Ryokei; Ogawa, Yasuo; Yukutake, Yohei; Kanda, Wataru; Komori, Shogo; Hase, Hideaki; Goto, Tada-nori; Honda, Ryou; Harada, Masatake; Yamazaki, Tomoya; Kamo, Masato; Kawasaki, Shingo; Higa, Tetsuya; Suzuki, Takeshi; Yasuda, Yojiro; Tani, Masanori; Usui, Yoshiya

    2018-04-01

    On 29 June 2015, a small phreatic eruption occurred at Hakone volcano, Central Japan, forming several vents in the Owakudani geothermal area on the northern slope of the central cones. Intense earthquake swarm activity and geodetic signals corresponding to the 2015 eruption were also observed within the Hakone caldera. To complement these observations and to characterise the shallow resistivity structure of Hakone caldera, we carried out a three-dimensional inversion of magnetotelluric measurement data acquired at 64 sites across the region. We utilised an unstructured tetrahedral mesh for the inversion code of the edge-based finite element method to account for the steep topography of the region during the inversion process. The main features of the best-fit three-dimensional model are a bell-shaped conductor, the bottom of which shows good agreement with the upper limit of seismicity, beneath the central cones and the Owakudani geothermal area, and several buried bowl-shaped conductive zones beneath the Gora and Kojiri areas. We infer that the main bell-shaped conductor represents a hydrothermally altered zone that acts as a cap or seal to resist the upwelling of volcanic fluids. Enhanced volcanic activity may cause volcanic fluids to pass through the resistive body surrounded by the altered zone and thus promote brittle failure within the resistive body. The overlapping locations of the bowl-shaped conductors, the buried caldera structures and the presence of sodium-chloride-rich hot springs indicate that the conductors represent porous media saturated by high-salinity hot spring waters. The linear clusters of earthquake swarms beneath the Kojiri area may indicate several weak zones that formed due to these structural contrasts.[Figure not available: see fulltext.

  1. Magnetotelluric Studies for Hydrocarbon and Geothermal Resources: Examples from the Asian Region

    Science.gov (United States)

    Patro, Prasanta K.

    2017-09-01

    Magnetotellurics (MT) and the other related electrical and electromagnetic methods play a very useful role in resource exploration. This review paper presents the current scenario of application of MT in the exploration for hydrocarbons and geothermal resources in Asia. While seismics is the most preferred method in oil exploration, it is, however, beset with several limitations in the case of sedimentary targets overlain by basalts or evaporate/carbonate rocks where the high-velocity layers overlying the lower velocity layers pose a problem. In such cases, MT plays an important and, in some cases, a crucial role in mapping these potential reservoirs because of significant resistivity contrast generally observed between the basalts and the underlying sedimentary layers. A few case histories are presented that typically illustrate the role of MT in this context. In the case of geothermal exploration, MT is known to be highly effective in deciphering the target areas because of the conductivity structures arising from the presence and circulation of highly conductive fluids in the geothermal target areas. A few examples of MT studies carried out in some of the potential areas of geothermal significance in the Asian region are also discussed. While it is a relatively favorable situation for application of EM and MT methods in the case of exploration of the high-enthalpy region due to the development of well-defined conceptual models, still the low-enthalpy regions need to be understood well, particularly because of more complex structural patterns and the fluid circulation under relatively low-temperature conditions. Currently, a lot of modeling in both geothermal and hydrocarbon exploration is being done using three-dimensional techniques, and it is the right time to go for integration and three-dimensional joint inversion of the geophysical parameters such as resistivity, velocity, density, from MT, electromagnetics (EM), seismics and gravity.

  2. Geometries of geoelectrical structures in central Tibetan Plateau from INDEPTH magnetotelluric data

    Science.gov (United States)

    Vozar, Jan; Jones, Alan G.; Le Pape, Florian

    2013-04-01

    Magnetotelluric (MT) data collected on N-S profiles crossing the Banggong-Nujiang Suture, which separates the Qiangtang and Lhasa Terranes in central Tibet, as a part of InterNational DEep Profiling of Tibet and the Himalaya project (INDEPTH) are modeled by 2D and 3D inversion codes. The 2D deep MT model of line 500 confirms previous observations concluding that the region is characterized to first-order by a resistive upper crust and a conductive, partially melted, middle to lower crust that extends from the Lhasa Terrane to the Qiangtang Terrane with varying depth. The same conductive structure setting, but in shallower depths is also present on the eastern 400 line. From deep electromagnetic sounding, supported by independent 1D integrated petro-physical investigation, we can estimate the next upper-mantle conductive layer at depths from 200 km to 250 km below the Lhasa Terrane and less resistive Tibetan lithosphere below the Qiangtang Terrane with conductive upper-mantle in depths about 120 km. The anisotropic 2D modeling reveals lower crustal anisotropy in Lhasa Terrane, which can interpreted as crustal channel flow. The 3D inversion models of all MT data from central Tibet show dominant 2D regional strike of mid and lower crustal structures equal N110E. This orientation is parallel to Shuanghu suture, BengCo Jiali strike-slip fault system and perpendicular to convergence direction. The lower crust conductor in central Lhasa Terrane can be interpreted more likely as 3D lower Indian crust structure, located to the east from line 500, than geoelectrical anisotropic crustal flow.

  3. Potential Magma Chambers beneath the Tatun Volcanic Area, Taiwan: Results from Magnetotelluric Survey and Monitoring

    Science.gov (United States)

    Chen, C.

    2013-12-01

    Previous earthquakes analysis indicated existing seismicity anomaly beneath Tatun volcano, Taiwan, possibly caused by the fluid activity of the volcano. Helium isotope studies also indicated that over 60% of the fumarolic gases and vapors originated from deep mantle in the Tatun volcano area. The chemistry of the fumarolic gases and vapors and seismicity anomaly are important issues in view of possible magma chamber in the Tatun volcano, where is in the vicinity of metropolitan Taipei, only 15 km north of the capital city. In this study magnetotelluric (MT) soundings and monitoring were deployed to understand the geoelectric structures in the Tatun volcano as Electromagnetic methods are sensitive to conductivity contrasts and can be used as a supplementary tool to delineate reservoir boundaries. An anticline extending more than 10 km beneath the Chih-Shin-Shan and Da-You-Kan areas was recognized. Low resistivity at a shallow and highly porous layer 500m thick might indicate circulation of heated water. However, a high resistivity layer at depth between 2 and 6 km was detected. This layer could be associated with high micro-earthquakes zone. The characteristics of this layer produced by either the magma chamber or other geothermal activity were similar to that of some other active volcanic areas in the world. At 6 km underground was a dome structure of medium resistivity. This structure could be interpreted as a magma chamber in which the magma is possibly cooling down, as judged by its relatively high resistivity. The exact attributes of the magma chamber were not precisely determined from the limited MT soundings. At present, a joint monitors including seismic activity, ground deformation, volcanic gases, and changes in water levels and chemistry are conducted by universities and government agencies. When unusual activity is detected, a response team may do more ground surveys to better determine if an eruption is likely.

  4. A magnetotelluric study of the sensitivity of an area to seismoelectric signals

    Directory of Open Access Journals (Sweden)

    G. Balasis

    2005-01-01

    Full Text Available During recent years, efforts at better understanding the physical properties of precursory ultra-low frequency pre-seismic electric signals (SES have been intensified. Experiments show that SES cannot be observed at all points of the Earth's surface but only at certain so-called sensitive sites. Moreover, a sensitive site is capable of collecting SES from only a restricted number of seismic areas (selectivity effect. Therefore the installation of a permanent station appropriate for SES collection should necessarily be preceded by a pilot study over a broad area and for a long duration. In short, a number of temporary stations are installed and, after the occurrence of several significant earthquakes (EQs from a given seismic area, the most appropriate (if any of these temporary stations, in the sense that they happen to collect SES, can be selected as permanent. Such a long experiment constitutes a serious disadvantage in identifying a site as SES sensitive. However, the SES sensitivity of a site should be related to the geoelectric structure of the area that hosts the site as well as the regional geoelectric structure between the station and the seismic focal area. Thus, knowledge of the local and regional geoelectric structure can dramatically reduce the time involved in identifying SES sites. In this paper the magnetotelluric method is used to investigate the conductivity structure of an area where a permanent SES station is in operation. Although general conclusions cannot be drawn, the area surrounding an SES site near Ioannina, Greece is characterized by: (1 major faults in the vicinity; (2 highly resistive structure flanked by abrupt conductivity contrasts associated with large-scale geologic contacts, and (3 local inhomogeneities in conductivity structure. The above results are consistent with the fact that electric field amplitudes from remotely-generated signals should be appreciably stronger at such sites when compared to neighboring

  5. Magnetotelluric survey of Ischia resurgent caldera (Southern Italy): inference for volcano-tectonics and dynamic

    Science.gov (United States)

    Carlino, S.; Di Giuseppe, M. G.; Troiano, A.

    2017-12-01

    The island of Ischia (located in the Bay of Naples) represents a peculiar case of well-exposed caldera that has experienced a large (>800m) and rapid resurgence, until recent time. It gives us the possibility for a better understanding of caldera resurgence process, by integrating the available geological information with new geophysical data of the deeper structures associated to the resurgence. To this aim, a magnetotelluric survey of the island, has been performed along two main profiles of the central-western sector, obtaining the first electrical resistivity map down to a depth of 3km. The resurgence is tough to be associated to a shallow magma intrusion, which also produced a vigorous hot fluids circulation with high geothermal gradients (>150°Ckm-1) in the southern and western sector. The interpretation of resistivity variations allow us to recognize the main volcano-tectonic features of central-western part of the island, along the two profiles, such as the presence of a possible very shallow magmatic intrusion to a depth of about 1km, the tectonic structures bordering the resurgent area and the occurrence of large thermal anomaly of the western sector. All these data are fundamental for the assessment of volcano-dynamic of the island and associated hazard. Furthermore, this study show a not common example of a large resurgence that is likely generated by a laccolith intrusion. This process is generally associated to the arrival of fresh magma into the system that, in turn, may imply imminent eruption and high volcanic hazard.

  6. Structure and tectonics of the northwestern United States from EarthScope USArray magnetotelluric data

    Science.gov (United States)

    Bedrosian, Paul A.; Feucht, Daniel W.

    2014-01-01

    The magnetotelluric component of the EarthScope USArray program has covered over 35% of the continental United States. Resistivity tomography models derived from these data image lithospheric structure and provide constraints on the distribution of fluids and melt within the lithosphere. We present a three-dimensional resistivity model of the northwestern United States which provides new insight into the tectonic assembly of western North America from the Archean to present. Comparison with seismic tomography models reveals regions of correlated and anti-correlated resistivity and velocity that help identify thermal and compositional variations within the lithosphere. Recent (Neogene) tectonic features reflected in the model include the subducting Juan de Fuca–Gorda plate which can be traced beneath the forearc to more than 100 km depth, high lithospheric conductivity along the Snake River Plain, and pronounced lower-crustal and upper-mantle conductivity beneath the Basin and Range. The latter is abruptly terminated to the northwest by the Klamath–Blue Mountains Lineament, which we interpret as an important structure during and since the Mesozoic assembly of the region. This boundary is interpreted to separate hot extended lithosphere from colder, less extended lithosphere. The western edge of Proterozoic North America, as indicated by the Cretaceous initial 87Sr/86Sr = 0.706 contour, is clearly reflected in the resistivity model. We further image an Archean crustal block (“Pend Oreille block”) straddling the Washington/Idaho border, which we speculate separated from the Archean Medicine Hat block in the Proterozoic. Finally, in the modern Cascades forearc, the geometry and internal structure of the Eocene Siletz terrane is reflected in the resistivity model. The apparent eastern edge of the Siletz terrane under the Cascades arc suggests that pre-Tertiary rocks fill the Washington and Oregon back-arc.

  7. Class-D audio amplifiers with negative feedback

    OpenAIRE

    Cox, Stephen M.; Candy, B. H.

    2006-01-01

    There are many different designs for audio amplifiers. Class-D, or switching, amplifiers generate their output signal in the form of a high-frequency square wave of variable duty cycle (ratio of on time to off time). The square-wave nature of the output allows a particularly efficient output stage, with minimal losses. The output is ultimately filtered to remove components of the spectrum above the audio range. Mathematical models are derived here for a variety of related class-D amplifier de...

  8. A second-order class-D audio amplifier

    OpenAIRE

    Cox, Stephen M.; Tan, M.T.; Yu, J.

    2011-01-01

    Class-D audio amplifiers are particularly efficient, and this efficiency has led to their ubiquity in a wide range of modern electronic appliances. Their output takes the form of a high-frequency square wave whose duty cycle (ratio of on-time to off-time) is modulated at low frequency according to the audio signal. A mathematical model is developed here for a second-order class-D amplifier design (i.e., containing one second-order integrator) with negative feedback. We derive exact expression...

  9. Cambridge English First 2 audio CDs : authentic examination papers

    CERN Document Server

    2016-01-01

    Four authentic Cambridge English Language Assessment examination papers for the Cambridge English: First (FCE) exam. These examination papers for the Cambridge English: First (FCE) exam provide the most authentic exam preparation available, allowing candidates to familiarise themselves with the content and format of the exam and to practise useful exam techniques. The Audio CDs contain the recorded material to allow thorough preparation for the Listening paper and are designed to be used with the Student's Book. A Student's Book with or without answers and a Student's Book with answers and downloadable Audio are available separately. These tests are also available as Cambridge English: First Tests 5-8 on Testbank.org.uk

  10. Audio engineering 101 a beginner's guide to music production

    CERN Document Server

    Dittmar, Tim

    2013-01-01

    Audio Engineering 101 is a real world guide for starting out in the recording industry. If you have the dream, the ideas, the music and the creativity but don't know where to start, then this book is for you!Filled with practical advice on how to navigate the recording world, from an author with first-hand, real-life experience, Audio Engineering 101 will help you succeed in the exciting, but tough and confusing, music industry. Covering all you need to know about the recording process, from the characteristics of sound to a guide to microphones to analog versus digital

  11. Animation, audio, and spatial ability: Optimizing multimedia for scientific explanations

    Science.gov (United States)

    Koroghlanian, Carol May

    This study investigated the effects of audio, animation and spatial ability in a computer based instructional program for biology. The program presented instructional material via text or audio with lean text and included eight instructional sequences presented either via static illustrations or animations. High school students enrolled in a biology course were blocked by spatial ability and randomly assigned to one of four treatments (Text-Static Illustration Audio-Static Illustration, Text-Animation, Audio-Animation). The study examined the effects of instructional mode (Text vs. Audio), illustration mode (Static Illustration vs. Animation) and spatial ability (Low vs. High) on practice and posttest achievement, attitude and time. Results for practice achievement indicated that high spatial ability participants achieved more than low spatial ability participants. Similar results for posttest achievement and spatial ability were not found. Participants in the Static Illustration treatments achieved the same as participants in the Animation treatments on both the practice and posttest. Likewise, participants in the Text treatments achieved the same as participants in the Audio treatments on both the practice and posttest. In terms of attitude, participants responded favorably to the computer based instructional program. They found the program interesting, felt the static illustrations or animations made the explanations easier to understand and concentrated on learning the material. Furthermore, participants in the Animation treatments felt the information was easier to understand than participants in the Static Illustration treatments. However, no difference for any attitude item was found for participants in the Text as compared to those in the Audio treatments. Significant differences were found by Spatial Ability for three attitude items concerning concentration and interest. In all three items, the low spatial ability participants responded more positively

  12. Minimizing Crosstalk in Self Oscillating Switch Mode Audio Power Amplifiers

    DEFF Research Database (Denmark)

    Knott, Arnold; Ploug, Rasmus Overgaard

    2012-01-01

    a method to minimize this phenomenon by improving the integrity of the various power distribution systems of the amplifier. The method is then applied to an amplifier built for this investigation. The results show that the crosstalk is suppressed with 30 dB, but is not entirely eliminated......The varying switching frequencies of self oscillating switch mode audio amplifiers have been known to cause interchannel intermodulation disturbances in multi channel configurations. This crosstalk phenomenon has a negative impact on the audio performance. The goal of this paper is to present...

  13. Can audio recording of outpatient consultations improve patient outcome?

    DEFF Research Database (Denmark)

    Wolderslund, Maiken; Kofoed, Poul-Erik; Axboe, Mette

    different departments: Orthopedics, Urology, Internal Medicine and Pediatrics. A total of 5,460 patients will be included from the outpatient clinics. All patients randomized to an intervention group are offered audio recording of their consultation. An Interactive Voice Response platform enables an audio....... The intervention will be evaluated using a questionnaire measuring different aspect of patients recall and understanding of the information given, patients need for additional information subsequent to the consultation and their overall satisfaction with the consultation. Results The study will be conducted from...

  14. A conceptual framework for audio-visual museum media

    DEFF Research Database (Denmark)

    Kirkedahl Lysholm Nielsen, Mikkel

    2017-01-01

    In today's history museums, the past is communicated through many other means than original artefacts. This interdisciplinary and theoretical article suggests a new approach to studying the use of audio-visual media, such as film, video and related media types, in a museum context. The centre...... and museum studies, existing case studies, and real life observations, the suggested framework instead stress particular characteristics of contextual use of audio-visual media in history museums, such as authenticity, virtuality, interativity, social context and spatial attributes of the communication...

  15. Audio pacemaker : Walking, talking indigenous knowledge

    CSIR Research Space (South Africa)

    Bidwell, NJ

    2012-10-01

    Full Text Available stream_source_info Bidwell1_2012_ABSTRACT ONLY.pdf.txt stream_content_type text/plain stream_size 1422 Content-Encoding ISO-8859-1 stream_name Bidwell1_2012_ABSTRACT ONLY.pdf.txt Content-Type text/plain; charset=ISO-8859-1...

  16. Audio coding in wireless acoustic sensor networks

    DEFF Research Database (Denmark)

    Zahedi, Adel; Østergaard, Jan; Jensen, Søren Holdt

    2015-01-01

    In this paper, we consider the problem of source coding for a wireless acoustic sensor network where each node in the network makes its own noisy measurement of the sound field, and communicates with other nodes in the network by sending and receiving encoded versions of the measurements. To make...

  17. Safe-commutation principle for direct single-phase AC-AC converters for use in audio power amplification

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.; Andersen, Michael A.E.

    2005-07-01

    This paper presents an alternative safe commutation principle for a single phase bidirectional bridge, for use in the new generation of direct single-stage AC-AC audio power amplifiers. As compared with the bridge commutation with load current or source voltage sensing, in this approach it is not required to do any measurements, thus making it more reliable. Initial testing made on the prototype prove the feasibility of the approach. (au)

  18. Magnetotelluric evidence for a deep-crustal mineralizing system beneath the Olympic Dam iron oxide copper-gold deposit, southern Australia

    Science.gov (United States)

    Heinson, Graham S.; Direen, Nicholas G.; Gill, Rob M.

    2006-07-01

    The iron oxide copper-gold Olympic Dam deposit, situated along the margin of the Proterozoic Gawler craton, South Australia, is the world's largest uranium deposit and sixth-largest copper deposit; it also contains significant reserves of gold, silver, and rare earth elements. Gaining a better understanding of the mechanisms for genesis of the economic liberalization is fundamental for defining exploration models in similar crustal settings. To delineate crustal structures that may constrain mineral system fluid pathways, coincident deep crustal seismic and magnetotelluric (MT) transects were obtained along a 220 km section that crosses Olympic Dam and the major crustal boundaries. In this paper we present results from 58 long-period (10 104 s) MT sites, with site spacing of 5 10 km. A two-dimensional inversion of MT data from 33 sites to a depth of 100 km shows four notable features: (1) sedimentary cover sequences with low resistivity (1000 Ω·m) Archean crustal core from a more conductive crust and mantle to the north (typically Olympic Dam, the upper-middle crust to ˜20 km is quite resistive (˜1000 Ω·m), but the lower crust is much more conductive (Olympic Dam, we image a low-resistivity region (Olympic Dam may be due to the upward movement of CO2-bearing volatiles near the time of deposit formation that precipitated conductive graphite liberalization along grain boundaries, simultaneously annihilating acoustic impedance boundaries. The source of the volatiles may be from the mantle degassing or retrograde metamorphism of the lower crust associated with Proterozoic crustal deformation.

  19. A time-frequency analysis method to obtain stable estimates of magnetotelluric response function based on Hilbert-Huang transform

    Science.gov (United States)

    Cai, Jianhua

    2017-05-01

    The time-frequency analysis method represents signal as a function of time and frequency, and it is considered a powerful tool for handling arbitrary non-stationary time series by using instantaneous frequency and instantaneous amplitude. It also provides a possible alternative to the analysis of the non-stationary magnetotelluric (MT) signal. Based on the Hilbert-Huang transform (HHT), a time-frequency analysis method is proposed to obtain stable estimates of the magnetotelluric response function. In contrast to conventional methods, the response function estimation is performed in the time-frequency domain using instantaneous spectra rather than in the frequency domain, which allows for imaging the response parameter content as a function of time and frequency. The theory of the method is presented and the mathematical model and calculation procedure, which are used to estimate response function based on HHT time-frequency spectrum, are discussed. To evaluate the results, response function estimates are compared with estimates from a standard MT data processing method based on the Fourier transform. All results show that apparent resistivities and phases, which are calculated from the HHT time-frequency method, are generally more stable and reliable than those determined from the simple Fourier analysis. The proposed method overcomes the drawbacks of the traditional Fourier methods, and the resulting parameter minimises the estimation bias caused by the non-stationary characteristics of the MT data.

  20. Two-dimensional magnetotelluric model of deep resistivity structure in the Bodie-Aurora district of California

    Science.gov (United States)

    Sampson, Jay A.

    2006-01-01

    Introduction: Magnetotelluric data were acquired during October 2001 by the U.S. Geological Survey (USGS) as part of a study to examine the structural nature of basins in the transition zone between the Sierra Nevada Mountains of California and the Basin and Range province of Nevada. Magnetotelluric (MT) geophysical studies assist the mapping of geologic structure and the inference of lithologic packages that are concealed beneath the Earth's surface. The Basin and Range province has a complicated geologic history, which includes extension and compression of the Earth's crust to form the basins and ranges that blanket much of Nevada. The basins and ranges in the vicinity of this study trend northeastward and are bounded by steeply dipping strike slip faults. Interestingly, deep east-west magnetic trends occur in the aeromagnetic data of this study area indicating that the northeast-trending basins and ranges represent only thin-skinned deformation at the surface with an underlying east-west structure. To investigate this issue, MT data were acquired at seven stations in eastern California, 20 km east of Mono Lake. The purpose of this report is to present a two-dimensional apparent resistivity model of the MT data acquired for this study.

  1. Multi-site magnetotelluric measurement system with real-time data analysis. Final technical report No. 210

    Energy Technology Data Exchange (ETDEWEB)

    Becker, J.D.; Bostick, F.X. Jr.; Smith, H.W.

    1981-09-01

    A magnetotelluric measurement system has been designed to provide a more cost effective electrical method for geothermal and mineral exploration. The theoretical requirements and sensitivities of the magnetotelluric inversion process were specifically addressed in determining system performance requirements. Significantly reduced instrument noise levels provide improved data quality, and simultaneous measurement at up to six locations provides reduced cost per site. Remotely located, battery powered, instrumentation packages return data to a central controlling site through a 2560 baud wire-line or radio link. Each remote package contains preamplifiers, data conditioning filters, and a 12-bit gain ranging A-D converter for frequencies from 0.001 Hz to 8 Hz. Data frequencies above 8 Hz are processed sequentially by a heterodyne receiver to reduce bandwidth to within the limits of the 2560 baud data link. The central data collection site provides overall control for the entire system. The system operator interacts with the system through a CRT terminal, and he receives hard copy from a matrix graphics printer. Data from the remote packages may be recorded in time sequence on a magnetic tape cartridge system, or an optional Hewlett-Packard 21MX minicomputer can be used to perform real-time frequency analysis. The results of this analysis provide feedback to the operator for improved evaluation of system performance and for selection of future measurement sites.

  2. Evaluation of an Audio Cassette Tape Lecture Course

    Science.gov (United States)

    Blank, Jerome W.

    1975-01-01

    An audio-cassette continuing education course (Selected Topics in Pharmacology) from Extension Services in Pharmacy at the University of Wisconsin was offered to a selected test market of pharmacists and evaluated using a pre-, post-test design. Results showed significant increase in cognitive knowledge and strong approval of students. (JT)

  3. Subband coding of digital audio signals without loss of quality

    NARCIS (Netherlands)

    Veldhuis, Raymond N.J.; Breeuwer, Marcel; van de Waal, Robbert

    1989-01-01

    A subband coding system for high quality digital audio signals is described. To achieve low bit rates at a high quality level, it exploits the simultaneous masking effect of the human ear. It is shown how this effect can be used in an adaptive bit-allocation scheme. The proposed approach has been

  4. Audio-visual materials usage preference among agricultural ...

    African Journals Online (AJOL)

    It was found that respondents preferred radio, television, poster, advert, photographs, specimen, bulletin, magazine, cinema, videotape, chalkboard, and bulletin board as audio-visual materials for extension work. These are the materials that can easily be manipulated and utilized for extension work. Nigerian Journal of ...

  5. Streaming Audio and Video: New Challenges and Opportunities for Museums.

    Science.gov (United States)

    Spadaccini, Jim

    Streaming audio and video present new challenges and opportunities for museums. Streaming media is easier to author and deliver to Internet audiences than ever before; digital video editing is commonplace now that the tools--computers, digital video cameras, and hard drives--are so affordable; the cost of serving video files across the Internet…

  6. A Power Efficient Audio Amplifier Combining Switching and Linear Techniques

    NARCIS (Netherlands)

    van der Zee, Ronan A.R.; van Tuijl, Adrianus Johannes Maria

    1998-01-01

    Integrated Class D audio amplifiers are very power efficient, but require an external filter which prevents further integration. Also due to this filter, large feedback factors are hard to realise, so that the load influences the distortion- and transfer characteristics. The amplifier presented in

  7. Turkish Music Genre Classification using Audio and Lyrics Features

    Directory of Open Access Journals (Sweden)

    Önder ÇOBAN

    2017-05-01

    Full Text Available Music Information Retrieval (MIR has become a popular research area in recent years. In this context, researchers have developed music information systems to find solutions for such major problems as automatic playlist creation, hit song detection, and music genre or mood classification. Meta-data information, lyrics, or melodic content of music are used as feature resource in previous works. However, lyrics do not often used in MIR systems and the number of works in this field is not enough especially for Turkish. In this paper, firstly, we have extended our previously created Turkish MIR (TMIR dataset, which comprises of Turkish lyrics, by including the audio file of each song. Secondly, we have investigated the effect of using audio and textual features together or separately on automatic Music Genre Classification (MGC. We have extracted textual features from lyrics using different feature extraction models such as word2vec and traditional Bag of Words. We have conducted our experiments on Support Vector Machine (SVM algorithm and analysed the impact of feature selection and different feature groups on MGC. We have considered lyrics based MGC as a text classification task and also investigated the effect of term weighting method. Experimental results show that textual features can also be effective as well as audio features for Turkish MGC, especially when a supervised term weighting method is employed. We have achieved the highest success rate as 99,12\\% by using both audio and textual features together.

  8. Improved Techniques for Automatic Chord Recognition from Music Audio Signals

    Science.gov (United States)

    Cho, Taemin

    2014-01-01

    This thesis is concerned with the development of techniques that facilitate the effective implementation of capable automatic chord transcription from music audio signals. Since chord transcriptions can capture many important aspects of music, they are useful for a wide variety of music applications and also useful for people who learn and perform…

  9. Haptic and Visual feedback in 3D Audio Mixing Interfaces

    DEFF Research Database (Denmark)

    Gelineck, Steven; Overholt, Daniel

    2015-01-01

    This paper describes the implementation and informal evaluation of a user interface that explores haptic feedback for 3D audio mixing. The implementation compares different approaches using either the LEAP Motion for mid-air hand gesture control, or the Novint Falcon for active haptic feed- back...

  10. Audio-Visual Aid in Teaching "Fatty Liver"

    Science.gov (United States)

    Dash, Sambit; Kamath, Ullas; Rao, Guruprasad; Prakash, Jay; Mishra, Snigdha

    2016-01-01

    Use of audio visual tools to aid in medical education is ever on a rise. Our study intends to find the efficacy of a video prepared on "fatty liver," a topic that is often a challenge for pre-clinical teachers, in enhancing cognitive processing and ultimately learning. We prepared a video presentation of 11:36 min, incorporating various…

  11. Studies on a Spatialized Audio Interface for Sonar

    Science.gov (United States)

    2011-10-03

    addition of spatialized audio to visual displays for sonar is much akin to the development of talking movies in the early days of cinema and can be...than using the brute-force approach. PCA is one among several techniques that share similarities with the computational architecture of a

  12. The Role of Audio Media in the Lives of Children.

    Science.gov (United States)

    Christenson, Peter G.; Lindlof, Thomas R.

    Mass communication researchers have largely ignored the role of audio media and popular music in the lives of children, yet the available evidence shows that children do listen. Extant studies yield a consistent developmental portrait of childrens' listening frequency, but there is a notable lack of programatic research over the past decade, one…

  13. The relationship between basic audio quality and overall listening experience.

    Science.gov (United States)

    Schoeffler, Michael; Herre, Jürgen

    2016-09-01

    Basic audio quality (BAQ) is a well-known perceptual attribute, which is rated in various listening test methods to measure the performance of audio systems. Unfortunately, when it comes to purchasing audio systems, BAQ might not have a significant influence on the customers' buying decisions since other factors, like brand loyalty, might be more important. In contrast to BAQ, overall listening experience (OLE) is an affective attribute which incorporates all aspects that are important to an individual assessor, including his or her preference for music genre and audio quality. In this work, the relationship between BAQ and OLE is investigated in more detail. To this end, an experiment was carried out, in which participants rated the BAQ and the OLE of music excerpts with different timbral and spatial degradations. In a between-group-design procedure, participants were assigned into two groups, in each of which a different set of stimuli was rated. The results indicate that rating of both attributes, BAQ and OLE, leads to similar rankings, even if a different set of stimuli is rated. In contrast to the BAQ ratings, which were more influenced by timbral than spatial degradations, the OLE ratings were almost equally influenced by timbral and spatial degradations.

  14. Market potential for interactive audio-visual media

    NARCIS (Netherlands)

    Leurdijk, A.; Limonard, S.

    2005-01-01

    NM2 (New Media for a New Millennium) develops tools for interactive, personalised and non-linear audio-visual content that will be tested in seven pilot productions. This paper looks at the market potential for these productions from a technological, a business and a users' perspective. It shows

  15. Computationally efficient clustering of audio-visual meeting data

    NARCIS (Netherlands)

    Hung, H.; Friedland, G.; Yeo, C.; Shao, L.; Shan, C.; Luo, J.; Etoh, M.

    2010-01-01

    This chapter presents novel computationally efficient algorithms to extract semantically meaningful acoustic and visual events related to each of the participants in a group discussion using the example of business meeting recordings. The recording setup involves relatively few audio-visual sensors,

  16. Multi Carrier Modulator for Switch-Mode Audio Power Amplifiers

    DEFF Research Database (Denmark)

    Knott, Arnold; Pfaffinger, Gerhard; Andersen, Michael Andreas E.

    2008-01-01

    While switch-mode audio power amplifiers allow compact implementations and high output power levels due to their high power efficiency, they are very well known for creating electromagnetic interference (EMI) with other electronic equipment, in particular radio receivers. Lowering the EMI of swit...

  17. Audio Quality Assurance : An Application of Cross Correlation

    DEFF Research Database (Denmark)

    Jurik, Bolette Ammitzbøll; Nielsen, Jesper Asbjørn Sindahl

    2012-01-01

    We describe algorithms for automated quality assurance on content of audio files in context of preservation actions and access. The algorithms use cross correlation to compare the sound waves. They are used to do overlap analysis in an access scenario, where preserved radio broadcasts are used in...

  18. Real-time Loudspeaker Distance Estimation with Stereo Audio

    DEFF Research Database (Denmark)

    Nielsen, Jesper Kjær; Gaubitch, Nikolay; Heusdens, Richard

    2015-01-01

    Knowledge on how a number of loudspeakers are positioned relative to a listening position can be used to enhance the listening experience. Usually, these loudspeaker positions are estimated using calibration signals, either audible or psycho-acoustically hidden inside the desired audio signal...

  19. Audio-Visual Perception System for a Humanoid Robotic Head

    Directory of Open Access Journals (Sweden)

    Raquel Viciana-Abad

    2014-05-01

    Full Text Available One of the main issues within the field of social robotics is to endow robots with the ability to direct attention to people with whom they are interacting. Different approaches follow bio-inspired mechanisms, merging audio and visual cues to localize a person using multiple sensors. However, most of these fusion mechanisms have been used in fixed systems, such as those used in video-conference rooms, and thus, they may incur difficulties when constrained to the sensors with which a robot can be equipped. Besides, within the scope of interactive autonomous robots, there is a lack in terms of evaluating the benefits of audio-visual attention mechanisms, compared to only audio or visual approaches, in real scenarios. Most of the tests conducted have been within controlled environments, at short distances and/or with off-line performance measurements. With the goal of demonstrating the benefit of fusing sensory information with a Bayes inference for interactive robotics, this paper presents a system for localizing a person by processing visual and audio data. Moreover, the performance of this system is evaluated and compared via considering the technical limitations of unimodal systems. The experiments show the promise of the proposed approach for the proactive detection and tracking of speakers in a human-robot interactive framework.

  20. Overview of the 2015 Workshop on Speech, Language and Audio in Multimedia

    NARCIS (Netherlands)

    Gravier, Guillaume; Jones, Gareth J.F.; Larson, Martha; Ordelman, Roeland J.F.

    2015-01-01

    The Workshop on Speech, Language and Audio in Multimedia (SLAM) positions itself at at the crossroad of multiple scientific fields - music and audio processing, speech processing, natural language processing and multimedia - to discuss and stimulate research results, projects, datasets and

  1. Transcript of Audio Narrative Portion of: Scandinavian Heritage. A Set of Five Audio-Visual Film Strip/Cassette Presentations.

    Science.gov (United States)

    Anderson, Gerald D.; Olson, David B.

    The document presents the transcript of the audio narrative portion of approximately 100 interviews with first and second generation Scandinavian immigrants to the United States. The document is intended for use by secondary school classroom teachers as they develop and implement educational programs related to the Scandinavian heritage in…

  2. Deutsch Durch Audio-Visuelle Methode: An Audio-Lingual-Oral Approach to the Teaching of German.

    Science.gov (United States)

    Dickinson Public Schools, ND. Instructional Media Center.

    This teaching guide, designed to accompany Chilton's "Deutsch Durch Audio-Visuelle Methode" for German 1 and 2 in a three-year secondary school program, focuses major attention on the operational plan of the program and a student orientation unit. A section on teaching a unit discusses four phases: (1) presentation, (2) explanation, (3)…

  3. Automatic Organisation and Quality Analysis of User-Generated Content with Audio Fingerprinting

    OpenAIRE

    Cavaco, Sofia; Magalhaes, Joao; Mordido, Gonçalo

    2018-01-01

    The increase of the quantity of user-generated content experienced in social media has boosted the importance of analysing and organising the content by its quality. Here, we propose a method that uses audio fingerprinting to organise and infer the quality of user-generated audio content. The proposed method detects the overlapping segments between different audio clips to organise and cluster the data according to events, and to infer the audio quality of the samples. A test setup with conce...

  4. Audio-Visual Temporal Recalibration Can be Constrained by Content Cues Regardless of Spatial Overlap

    OpenAIRE

    Roseboom, Warrick; Kawabe, Takahiro; Nishida, Shin?Ya

    2013-01-01

    It has now been well established that the point of subjective synchrony for audio and visual events can be shifted following exposure to asynchronous audio-visual presentations, an effect often referred to as temporal recalibration. Recently it was further demonstrated that it is possible to concurrently maintain two such recalibrated, and opposing, estimates of audio-visual temporal synchrony. However, it remains unclear precisely what defines a given audio-visual pair such that it is possib...

  5. Documentary management of the sport audio-visual information in the generalist televisions

    OpenAIRE

    Jorge Caldera Serrano; Felipe Alonso

    2007-01-01

    The management of the sport audio-visual documentation of the Information Systems of the state, zonal and local chains is analyzed within the framework. For it it is made makes a route by the documentary chain that makes the sport audio-visual information with the purpose of being analyzing each one of the parameters, showing therefore a series of recommendations and norms for the preparation of the sport audio-visual registry. Evidently the audio-visual sport documentation difference i...

  6. Auditory cross-modal reorganization in cochlear implant users indicates audio-visual integration.

    Science.gov (United States)

    Stropahl, Maren; Debener, Stefan

    2017-01-01

    There is clear evidence for cross-modal cortical reorganization in the auditory system of post-lingually deafened cochlear implant (CI) users. A recent report suggests that moderate sensori-neural hearing loss is already sufficient to initiate corresponding cortical changes. To what extend these changes are deprivation-induced or related to sensory recovery is still debated. Moreover, the influence of cross-modal reorganization on CI benefit is also still unclear. While reorganization during deafness may impede speech recovery, reorganization also has beneficial influences on face recognition and lip-reading. As CI users were observed to show differences in multisensory integration, the question arises if cross-modal reorganization is related to audio-visual integration skills. The current electroencephalography study investigated cortical reorganization in experienced post-lingually deafened CI users ( n  = 18), untreated mild to moderately hearing impaired individuals (n = 18) and normal hearing controls ( n  = 17). Cross-modal activation of the auditory cortex by means of EEG source localization in response to human faces and audio-visual integration, quantified with the McGurk illusion, were measured. CI users revealed stronger cross-modal activations compared to age-matched normal hearing individuals. Furthermore, CI users showed a relationship between cross-modal activation and audio-visual integration strength. This may further support a beneficial relationship between cross-modal activation and daily-life communication skills that may not be fully captured by laboratory-based speech perception tests. Interestingly, hearing impaired individuals showed behavioral and neurophysiological results that were numerically between the other two groups, and they showed a moderate relationship between cross-modal activation and the degree of hearing loss. This further supports the notion that auditory deprivation evokes a reorganization of the auditory system

  7. Auditory cross-modal reorganization in cochlear implant users indicates audio-visual integration

    Directory of Open Access Journals (Sweden)

    Maren Stropahl

    2017-01-01

    Full Text Available There is clear evidence for cross-modal cortical reorganization in the auditory system of post-lingually deafened cochlear implant (CI users. A recent report suggests that moderate sensori-neural hearing loss is already sufficient to initiate corresponding cortical changes. To what extend these changes are deprivation-induced or related to sensory recovery is still debated. Moreover, the influence of cross-modal reorganization on CI benefit is also still unclear. While reorganization during deafness may impede speech recovery, reorganization also has beneficial influences on face recognition and lip-reading. As CI users were observed to show differences in multisensory integration, the question arises if cross-modal reorganization is related to audio-visual integration skills. The current electroencephalography study investigated cortical reorganization in experienced post-lingually deafened CI users (n = 18, untreated mild to moderately hearing impaired individuals (n = 18 and normal hearing controls (n = 17. Cross-modal activation of the auditory cortex by means of EEG source localization in response to human faces and audio-visual integration, quantified with the McGurk illusion, were measured. CI users revealed stronger cross-modal activations compared to age-matched normal hearing individuals. Furthermore, CI users showed a relationship between cross-modal activation and audio-visual integration strength. This may further support a beneficial relationship between cross-modal activation and daily-life communication skills that may not be fully captured by laboratory-based speech perception tests. Interestingly, hearing impaired individuals showed behavioral and neurophysiological results that were numerically between the other two groups, and they showed a moderate relationship between cross-modal activation and the degree of hearing loss. This further supports the notion that auditory deprivation evokes a reorganization of the

  8. A reversible-jump Markov chain Monte Carlo algorithm for 1D inversion of magnetotelluric data

    Science.gov (United States)

    Mandolesi, Eric; Ogaya, Xenia; Campanyà, Joan; Piana Agostinetti, Nicola

    2018-04-01

    This paper presents a new computer code developed to solve the 1D magnetotelluric (MT) inverse problem using a Bayesian trans-dimensional Markov chain Monte Carlo algorithm. MT data are sensitive to the depth-distribution of rock electric conductivity (or its reciprocal, resistivity). The solution provided is a probability distribution - the so-called posterior probability distribution (PPD) for the conductivity at depth, together with the PPD of the interface depths. The PPD is sampled via a reversible-jump Markov Chain Monte Carlo (rjMcMC) algorithm, using a modified Metropolis-Hastings (MH) rule to accept or discard candidate models along the chains. As the optimal parameterization for the inversion process is generally unknown a trans-dimensional approach is used to allow the dataset itself to indicate the most probable number of parameters needed to sample the PPD. The algorithm is tested against two simulated datasets and a set of MT data acquired in the Clare Basin (County Clare, Ireland). For the simulated datasets the correct number of conductive layers at depth and the associated electrical conductivity values is retrieved, together with reasonable estimates of the uncertainties on the investigated parameters. Results from the inversion of field measurements are compared with results obtained using a deterministic method and with well-log data from a nearby borehole. The PPD is in good agreement with the well-log data, showing as a main structure a high conductive layer associated with the Clare Shale formation. In this study, we demonstrate that our new code go beyond algorithms developend using a linear inversion scheme, as it can be used: (1) to by-pass the subjective choices in the 1D parameterizations, i.e. the number of horizontal layers in the 1D parameterization, and (2) to estimate realistic uncertainties on the retrieved parameters. The algorithm is implemented using a simple MPI approach, where independent chains run on isolated CPU, to take

  9. Three-dimensional magnetotelluric imaging of Cascadia subduction zone from an amphibious array

    Science.gov (United States)

    Yang, B.; Egbert, G. D.; Key, K.; Bedrosian, P.; Livelybrooks, D.; Schultz, A.

    2016-12-01

    We present results from three-dimensional inversion of an amphibious magnetotelluric (MT) array consisting of 71 offshore and 75 onshore sites in the central part of Cascadia, to image down-dip and along strike variations of electrical conductivity, and constrain the 3D distribution of fluids and melt in the subduction zone. A larger scale array consisting of EarthScope transportable-array data and several 2D legacy profiles (e.g. EMSLAB, CAFE-MT, SWORMT) which covers WA, OR, northern CA and northern NV has been inverted separately, to provide a broader view of the subduction zone. Inverting these datasets including seafloor data, and involving strong coast effects presents many challenges, especially for the nominal TE mode impedances which have very anomalous phases in both land and seafloor sites. We find that including realistic bathymetry and conductive seafloor sediments significantly stabilizes the inversion, and that a two stage inversion strategy, first emphasizing fit to the more challenging TE data, improved overall data fits. We have also constrained the geometry of the (assumed resistive) subducting plates by extracting morphological parameters (e.g. upper boundary and thickness) from seismological models (McCrory et al 2012, Schmandt and Humphreys 2010). These constraints improve recovery and resolution of subduction related conductivity features. With the strategies mentioned above, we improved overall data fits, resulting in a model which reveals (for the first time) a conductive oceanic asthenosphere, extending under the North America plate. The most striking model features are conductive zones along the plate interface, including a continuous stripe of high conductivity just inboard of the coast, extending from the northern limits of our model in Washington state, to north-central Oregon. High conductivities also occur in patches near the tip of the mantle wedge, at depths appropriate for eclogitization, and at greater depth beneath the arc, in

  10. Amphibious Magnetotelluric Investigation of the Aleutian Arc: Mantle Melt Generation and Migration beneath Okmok Caldera

    Science.gov (United States)

    Zelenak, G.; Key, K.; Bennington, N. L.; Bedrosian, P.

    2015-12-01

    Understanding the factors controlling the release of volatiles from the downgoing slab, the subsequent generation of melt in the overlying mantle wedge, the migration of melt to the crust, and its evolution and emplacement within the crust are important for advancing our understanding of arc magmatism and crustal genesis. Because melt and aqueous fluids are a few orders of magnitude more electrically conductive than unmelted peridotite, the conductivity-mapping magnetotelluric (MT) method is well-suited to imaging fluids and melt beneath arc volcanoes. Here we present conductivity results from an amphibious MT profile crossing Okmok volcano in the central Aleutian arc. The Aleutian arc is one of the most volcanically active regions in North America, making it an ideal location for studying arc magnetism. Okmok volcano, located on the northeastern portion of Umnak Island, is among the most active volcanoes in the Aleutian chain. In addition to two caldera-forming events in the Holocene, numerous eruptions in the past century indicate a robust magmatic supply. Previous coarse resolution seismic studies have inferred a crustal magma reservoir. In order to investigate the role fluids play in melting the mantle wedge, how melts ascend through the corner flow regime of the mantle wedge, how melt migrates and is stored within the upper mantle and crust, and how this impacts explosive caldera forming eruptions, we carried out an amphibious geophysical survey across the arc in June-July 2015. Twenty-nine onshore MT stations and 10 offshore stations were collected in a 3D array covering Okmok, and 43 additional offshore MT stations completed a 300 km amphibious profile starting at the trench, crossing the forearc, arc and backarc. Thirteen onshore passive seismic stations were also installed and will remain in place for one year to supplement the twelve permanent stations on the island. Data collected by this project will be used to map seismic velocity and electrical

  11. Deformation Mechanism on the Northern Margin of the Tibetan Plateau Inferred from Magnetotelluric Data

    Science.gov (United States)

    Zhang, L.; Jin, S.; Wei, W.; Ye, G.; Xie, C.

    2017-12-01

    As a unique geologic unit on the northern margin of the Tibetan Plateau, the Qaidam Basin plays a significant role in constraining the vertical uplift and horizontal expansion of the plateau. However, deformation mechanism of the lithosphere beneath the Qaidam Basin is still highly debated. To better understand the lithospheric electrical structure and deformation mechanism of the Qaidam Basin, A 250 km long, NE-SW directed Magnetotelluric (MT) profile was finished in the northern portion of the Basin, which is roughly perpendicular to the thrust fault systems on the western and eastern margins of the Basin. The profile consists of 20 broad-band MT stations and 5 long-period MT stations. Original time series data is processed with regular robust routines. Dimensionality and regional strike direction are determined for the dataset through data analysis. 2D inversions were performed to produce a preferred model of the lithospheric electrical structure. Uncertainty analysis of the 2D inversion model was also conducted based on a data resampling approach. The outcome 2D electrical model was further used to estimate the distribution of temperature and melt fraction in the upper mantle based on laboratory-determined relationships between the electrical conductivity and temperature of nominally anhydrous minerals and basaltic melt by using the mixing law of Hashin-Shtrikman's bounds. These results suggest that: (1) the crust-mantle boundary is imaged as a conductive layer beneath the western Qaidam Basin, with its temperature estimated to be 1200-1300 ° and melt fraction 5-8%, indicating decoupling deformation of the crust and upper mantle. (2) A large-scale east-dipping conductor is imaged beneath the eastern Qaidam Basin extending from the upper crust to upper mantle, implying vertical coherent deformation of the lithosphere. Melt fraction of this conductive region is estimated to be as high as 10%, which might accommodates a major portion of the thrust deformation on

  12. Electrical resistivity structure beneath the Hangai Dome, Mongolia: intraplate volcanism and deformation imaged with magnetotelluric data

    Science.gov (United States)

    Comeau, M. J.; Becken, M.; Kaeufl, J.; Kuvshinov, A. V.; Kamm, J.; Grayver, A.; Demberel, S.; Usnikh, S. U.; Batmagnai, E.; Tserendug, S.

    2017-12-01

    The Hangai Dome in central Mongolia is characterized by intraplate volcanism on a high-elevation intra-continental plateau. Volcanism dates from the Oligocene to the Holocene and is thought to be coincident with the onset of the uplift of the Hangai Dome, indicating that the processes may be linked. However, the processes and driving mechanisms responsible for creating this region remain largely unexplained, due in part to a lack of high-resolution geophysical data over the area. An extensive magnetotelluric (MT) data set was collected over the Hangai Dome in 2016 and 2017, with broadband data (0.002 - 5,000 s) collected at a total of 294 sites. This data set consists of a large array ( 50 km site spacing) and several long ( 600 km) and dense ( 5 km site spacing) profiles that cross the uplifted Hangai Dome. Additionally, they cross the bounding faults of the Hangai block, the Bulnay fault in the north and the Bogd fault of the Gobi-Altai in the south, which have had several M>8 earthquakes in the past century. These MT data have been used to generate electrical resistivity models of the crust and upper mantle in this region. Anomalous, low resistivity ( 30 ohm-m) zones in the lower crust ( 25 - 50 km depth) are spatially associated with the surface expressions of volcanism and modern-day hydrothermal activity. These zones indicate the presence of local accumulations of fluids below the brittle-ductile transition zone. Interestingly, this feature terminates sharply at the South Hangai Fault Zone. Furthermore, lower resistivity pathways in the upper crust (0 - 25 km depth) connect the deeper features to the surface. This is prominently observed below the Hangai's youngest volcanic zones of Tariat/Khorgo and Chuluut, as well as the hot spring area of Tsenkher, near Tsetserleg. Additionally, an electrical signature can be associated with known fault zones and mineralized zones (such as the Bayankhongor mineral belt). An anomalous low-resistivity zone in the upper

  13. Deformation Mechanism of the Northern Tibetan Plateau as Revealed by Magnetotelluric Data

    Science.gov (United States)

    Zhang, Letian; Wei, Wenbo; Jin, Sheng; Ye, Gaofeng; Xie, Chengliang

    2017-04-01

    As a unique geologic unit on the northern margin of the Tibetan Plateau, the Qaidam Basin plays a significant role in constraining the vertical uplift and horizontal expansion of the northern and northeastern Tibetan Plateau. However, due to its complex evolution history and difficult logistic condition, deformation mechanism of the lithosphere beneath the Qaidam Basin is still highly debated. To better understand the lithospheric electrical structure and deformation mechanism of the Qaidam Basin, A 250 km long, NE-SW directed Magnetotelluric (MT) profile was finished in the northern portion of the Basin, which is roughly perpendicular to the thrust fault systems on the western and eastern margins of the Basin, as well as anticlinorium systems within the Basin. The profile consists of 20 broad-band MT stations and 5 long-period MT stations. Original time series data is processed with regular robust routines. Dimensionality and regional strike direction are determined for the dataset through data analysis. Based on the analysis results, 2D inversions were performed to produce a preferred model of the lithospheric electrical structure beneath the northern Qaidam Basin. Uncertainty analysis of the 2D inversion model was also conducted based on a data resampling approach. The outcome 2D electrical model was further used to estimate the distribution of temperature and melt fraction in the upper mantle based on laboratory-determined relationships between the electrical conductivity and temperature of nominally anhydrous minerals and basaltic melt by using the mixing law of Hashin-Shtrikman's bounds. All these results suggest that: (1) the crust-mantle boundary is imaged as a conductive layer beneath the western Qaidam Basin, with its temperature estimated to be 1200-1300 °C and melt fraction 5-8%, indicating decoupling deformation of the crust and upper mantle. (2) A large-scale east-dipping conductor is imaged beneath the eastern Qaidam Basin. This conductor extends

  14. Parametric Packet-Layer Model for Evaluation Audio Quality in Multimedia Streaming Services

    Science.gov (United States)

    Egi, Noritsugu; Hayashi, Takanori; Takahashi, Akira

    We propose a parametric packet-layer model for monitoring audio quality in multimedia streaming services such as Internet protocol television (IPTV). This model estimates audio quality of experience (QoE) on the basis of quality degradation due to coding and packet loss of an audio sequence. The input parameters of this model are audio bit rate, sampling rate, frame length, packet-loss frequency, and average burst length. Audio bit rate, packet-loss frequency, and average burst length are calculated from header information in received IP packets. For sampling rate, frame length, and audio codec type, the values or the names used in monitored services are input into this model directly. We performed a subjective listening test to examine the relationships between these input parameters and perceived audio quality. The codec used in this test was the Advanced Audio Codec-Low Complexity (AAC-LC), which is one of the international standards for audio coding. On the basis of the test results, we developed an audio quality evaluation model. The verification results indicate that audio quality estimated by the proposed model has a high correlation with perceived audio quality.

  15. Audio-Tutorial Instruction: A Strategy For Teaching Introductory College Geology.

    Science.gov (United States)

    Fenner, Peter; Andrews, Ted F.

    The rationale of audio-tutorial instruction is discussed, and the history and development of the audio-tutorial botany program at Purdue University is described. Audio-tutorial programs in geology at eleven colleges and one school are described, illustrating several ways in which programs have been developed and integrated into courses. Programs…

  16. Interactive 3D audio: Enhancing awareness of details in immersive soundscapes?

    DEFF Research Database (Denmark)

    Schmidt, Mikkel Nørgaard; Schwartz, Stephen; Larsen, Jan

    2012-01-01

    Spatial audio and the possibility of interacting with the audio environment is thought to increase listeners' attention to details in a soundscape. This work examines if interactive 3D audio enhances listeners' ability to recall details in a soundscape. Nine different soundscapes were constructed...

  17. Effects of Hearing Protection Device Attenuation on Unmanned Aerial Vehicle (UAV) Audio Signatures

    Science.gov (United States)

    2016-03-01

    UAV ) Audio Signatures by Melissa Bezandry, Adrienne Raglin, and John Noble Approved for public release; distribution...Research Laboratory Effects of Hearing Protection Device Attenuation on Unmanned Aerial Vehicle ( UAV ) Audio Signatures by Melissa Bezandry...Aerial Vehicle ( UAV ) Audio Signatures 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Melissa Bezandry

  18. Responding Effectively to Composition Students: Comparing Student Perceptions of Written and Audio Feedback

    Science.gov (United States)

    Bilbro, J.; Iluzada, C.; Clark, D. E.

    2013-01-01

    The authors compared student perceptions of audio and written feedback in order to assess what types of students may benefit from receiving audio feedback on their essays rather than written feedback. Many instructors previously have reported the advantages they see in audio feedback, but little quantitative research has been done on how the…

  19. Extraction, Mapping, and Evaluation of Expressive Acoustic Features for Adaptive Digital Audio Effects

    DEFF Research Database (Denmark)

    Holfelt, Jonas; Csapo, Gergely; Andersson, Nikolaj Schwab

    2017-01-01

    This paper describes the design and implementation of a real-time adaptive digital audio effect with an emphasis on using expressive audio features that control effect param- eters. Research in adaptive digital audio effects is cov- ered along with studies about expressivity and important...

  20. Comparison of Power Supply Pumping of Switch-Mode Audio Power Amplifiers with Resistive Loads and Loudspeakers as Loads

    DEFF Research Database (Denmark)

    Knott, Arnold; Petersen, Lars Press

    2013-01-01

    Power supply pumping is generated by switch-mode audio power amplifiers in half-bridge configuration, when they are driving energy back into their source. This leads in most designs to a rising rail voltage and can be destructive for either the decoupling capacitors, the rectifier diodes...... in the power supply or the power stage of the amplifier. Therefore precautions are taken by the amplifier and power supply designer to avoid those effects. Existing power supply pumping models are based on an ohmic load attached to the amplifier. This paper shows the analytical derivation of the resulting...... waveforms and extends the model to loudspeaker loads. Measurements verify, that the amount of supply pumping is reduced by a factor of 4 when comparing the nominal resistive load to a loudspeaker. A simplified and more accurate model is proposed and the influence of supply pumping on the audio performance...

  1. Probabilistic Graphical Models for the Analysis and Synthesis of Musical Audio

    Science.gov (United States)

    Hoffmann, Matthew Douglas

    Content-based Music Information Retrieval (MIR) systems seek to automatically extract meaningful information from musical audio signals. This thesis applies new and existing generative probabilistic models to several content-based MIR tasks: timbral similarity estimation, semantic annotation and retrieval, and latent source discovery and separation. In order to estimate how similar two songs sound to one another, we employ a Hierarchical Dirichlet Process (HDP) mixture model to discover a shared representation of the distribution of timbres in each song. Comparing songs under this shared representation yields better query-by-example retrieval quality and scalability than previous approaches. To predict what tags are likely to apply to a song (e.g., "rap," "happy," or "driving music"), we develop the Codeword Bernoulli Average (CBA) model, a simple and fast mixture-of-experts model. Despite its simplicity, CBA performs at least as well as state-of-the-art approaches at automatically annotating songs and finding to what songs in a database a given tag most applies. Finally, we address the problem of latent source discovery and separation by developing two Bayesian nonparametric models, the Shift-Invariant HDP and Gamma Process NMF. These models allow us to discover what sounds (e.g. bass drums, guitar chords, etc.) are present in a song or set of songs and to isolate or suppress individual source. These models' ability to decide how many latent sources are necessary to model the data is particularly valuable in this application, since it is impossible to guess a priori how many sounds will appear in a given song or set of songs. Once they have been fit to data, probabilistic models can also be used to drive the synthesis of new musical audio, both for creative purposes and to qualitatively diagnose what information a model does and does not capture. We also adapt the SIHDP model to create new versions of input audio with arbitrary sample sets, for example, to create

  2. Finding the Correspondence of Audio-Visual Events by Object Manipulation

    Science.gov (United States)

    Nishibori, Kento; Takeuchi, Yoshinori; Matsumoto, Tetsuya; Kudo, Hiroaki; Ohnishi, Noboru

    A human being understands the objects in the environment by integrating information obtained by the senses of sight, hearing and touch. In this integration, active manipulation of objects plays an important role. We propose a method for finding the correspondence of audio-visual events by manipulating an object. The method uses the general grouping rules in Gestalt psychology, i.e. “simultaneity” and “similarity” among motion command, sound onsets and motion of the object in images. In experiments, we used a microphone, a camera, and a robot which has a hand manipulator. The robot grasps an object like a bell and shakes it or grasps an object like a stick and beat a drum in a periodic, or non-periodic motion. Then the object emits periodical/non-periodical events. To create more realistic scenario, we put other event source (a metronome) in the environment. As a result, we had a success rate of 73.8 percent in finding the correspondence between audio-visual events (afferent signal) which are relating to robot motion (efferent signal).

  3. “Wrapping” X3DOM around Web Audio API

    Directory of Open Access Journals (Sweden)

    Andreas Stamoulias

    2015-12-01

    Full Text Available Spatial sound has a conceptual role in the Web3D environments, due to highly realism scenes that can provide. Lately the efforts are concentrated on the extension of the X3D/ X3DOM through spatial sound attributes. This paper presents a novel method for the introduction of spatial sound components in the X3DOM framework, based on X3D specification and Web Audio API. The proposed method incorporates the introduction of enhanced sound nodes for X3DOM which are derived by the implementation of the X3D standard components, enriched with accessional features of Web Audio API. Moreover, several examples-scenarios developed for the evaluation of our approach. The implemented examples established the achievability of new registered nodes in X3DOM, for spatial sound characteristics in Web3D virtual worlds.

  4. Audio teleconferencing: creative use of a forgotten innovation.

    Science.gov (United States)

    Mather, Carey; Marlow, Annette

    2012-06-01

    As part of a regional School of Nursing and Midwifery's commitment to addressing recruitment and retention issues, approximately 90% of second year undergraduate student nurses undertake clinical placements at: multipurpose centres; regional or district hospitals; aged care; or community centres based in rural and remote regions within the State. The remaining 10% undertake professional experience placement in urban areas only. This placement of a large cohort of students, in low numbers in a variety of clinical settings, initiated the need to provide consistent support to both students and staff at these facilities. Subsequently the development of an audio teleconferencing model of clinical facilitation to guide student teaching and learning and to provide support to registered nurse preceptors in clinical practice was developed. This paper draws on Weimer's 'Personal Accounts of Change' approach to describe, discuss and evaluate the modifications that have occurred since the inception of this audio teleconferencing model (Weimer, 2006).

  5. Audio Visual Media Components in Educational Game for Elementary Students

    Directory of Open Access Journals (Sweden)

    Meilani Hartono

    2016-12-01

    Full Text Available The purpose of this research was to review and implement interactive audio visual media used in an educational game to improve elementary students’ interest in learning mathematics. The game was developed for desktop platform. The art of the game was set as 2D cartoon art with animation and audio in order to make students more interest. There were four mini games developed based on the researches on mathematics study. Development method used was Multimedia Development Life Cycle (MDLC that consists of requirement, design, development, testing, and implementation phase. Data collection methods used are questionnaire, literature study, and interview. The conclusion is elementary students interest with educational game that has fun and active (moving objects, with fast tempo of music, and carefree color like blue. This educational game is hoped to be an alternative teaching tool combined with conventional teaching method.

  6. Computationally Efficient Clustering of Audio-Visual Meeting Data

    Science.gov (United States)

    Hung, Hayley; Friedland, Gerald; Yeo, Chuohao

    This chapter presents novel computationally efficient algorithms to extract semantically meaningful acoustic and visual events related to each of the participants in a group discussion using the example of business meeting recordings. The recording setup involves relatively few audio-visual sensors, comprising a limited number of cameras and microphones. We first demonstrate computationally efficient algorithms that can identify who spoke and when, a problem in speech processing known as speaker diarization. We also extract visual activity features efficiently from MPEG4 video by taking advantage of the processing that was already done for video compression. Then, we present a method of associating the audio-visual data together so that the content of each participant can be managed individually. The methods presented in this article can be used as a principal component that enables many higher-level semantic analysis tasks needed in search, retrieval, and navigation.

  7. An introduction to audio content analysis applications in signal processing and music informatics

    CERN Document Server

    Lerch, Alexander

    2012-01-01

    "With the proliferation of digital audio distribution over digital media, audio content analysis is fast becoming a requirement for designers of intelligent signal-adaptive audio processing systems. Written by a well-known expert in the field, this book provides quick access to different analysis algorithms and allows comparison between different approaches to the same task, making it useful for newcomers to audio signal processing and industry experts alike. A review of relevant fundamentals in audio signal processing, psychoacoustics, and music theory, as well as downloadable MATLAB files are also included"--

  8. Active Learning for Automatic Audio Processing of Unwritten Languages (ALAPUL)

    Science.gov (United States)

    2016-07-01

    AFRL-RH-WP-TR-2016-0074 ACTIVE LEARNING FOR AUTOMATIC AUDIO PROCESSING OF UNWRITTEN LANGUAGES (ALAPUL) Dimitra Vergyri Andreas Kathol Wen Wang...FA8650-15-C-9101 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) *Dimitra Vergyri; Andreas Kathol; Wen Wang; Chris Bartels; Julian VanHout...feature transform through deep auto-encoders for better phone recognition performance. We target iterative learning to improve the system through

  9. Amplitude Modulated Sinusoidal Signal Decomposition for Audio Coding

    DEFF Research Database (Denmark)

    Christensen, M. G.; Jacobson, A.; Andersen, S. V.

    2006-01-01

    In this paper, we present a decomposition for sinusoidal coding of audio, based on an amplitude modulation of sinusoids via a linear combination of arbitrary basis vectors. The proposed method, which incorporates a perceptual distortion measure, is based on a relaxation of a nonlinear least......-squares minimization. Rate-distortion curves and listening tests show that, compared to a constant-amplitude sinusoidal coder, the proposed decomposition offers perceptually significant improvements in critical transient signals....

  10. Pitch range variations improve cognitive processing of audio messages

    OpenAIRE

    Rodero Antón, Emma; Potter, Rob F.; Prieto Vives, Pilar, 1965-

    2017-01-01

    This study explores the effect of different speaker intonation strategies in audio messages on attention, autonomic arousal, and memory. An experiment was conducted in which participants listened to 16 radio commercials produced to vary in pitch range across sentences. Dependent variables were self-reported effectiveness and adequacy, psychophysiological arousal and attention, immediate word recall and recognition of information. Results showed that messages conveyed with pitch variations ach...

  11. Parameter and state estimation using audio and video signals

    OpenAIRE

    Evestedt, Magnus

    2005-01-01

    The complexity of industrial systems and the mathematical models to describe them increases. In many cases point sensors are no longer sufficient to provide controllers and monitoring instruments with the information necessary for operation. The need for other types of information, such as audio and video, has grown. Suitable applications range in a broad spectrum from microelectromechanical systems and bio-medical engineering to papermaking and steel production. This thesis is divided into f...

  12. Modular Sensor Environment : Audio Visual Industry Monitoring Applications

    OpenAIRE

    Guillot, Calvin

    2017-01-01

    This work was made for Electro Waves Oy. The company specializes in Audio-visual services and interactive systems. The purpose of this work is to design and implement a modular sensor environment for the company, which will be used for developing automated systems. This thesis begins with an introduction to sensor systems and their different topologies. It is followed by an introduction to the technologies used in this project. The system is divided in three parts. The client, tha...

  13. Evolution of magnetotelluric, total magnetic field, and VLF field parameters in Central Italy. Relations to local seismic activity

    Energy Technology Data Exchange (ETDEWEB)

    Meloni, A.; Di Mauro, D.; Mele, G.; Palangio, P. [Istituto Nazionale di Geofisica e Vulcanologia, Rome (Italy); Ernst, T.; Teisseyre, R. [Institute of Geophysics, Warszawa (Poland)

    2001-04-01

    Magnetotelluric data were collected at Collemeluccio (41.72{sup 0}N, 14.37{sup 0}E) in Central Italy from summer 1991 to spring 1998. Analyzed by means of tensor decomposition on the geoelectric potential and robust estimation on the geomagnetic field, this set of data allowed the investigation of the electromagnetic induction, is presented here in its time evolution and compared to local and regional seismic activity. Tecto magnetic field observations from absolute magnetic field level in Central Italy were also made on data simultaneously recorded at four magnetometer stations, using L'Aquila Geomagnetic Observatory as a reference for differentiation. Recent results gathered from a system of two VLF search coil wide-band antennas, installed in the L'Aquila Observatory, are also discussed in relation to local seismic activity.

  14. Innovative computational tools for reducing exploration risk through integration of water-rock interactions and magnetotelluric surveys

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Joseph [Univ. of Utah, Salt Lake City, UT (United States)

    2017-04-20

    Mapping permeability distributions in geothermal reservoirs is essential for reducing the cost of geothermal development. To avoid the cost and sampling bias of measuring permeability directly through drilling, we require remote methods of imaging permeability such as geophysics. Electrical resistivity (or its inverse, conductivity) is one of the most sensitive geophysical properties known to reflect long range fluid interconnection and thus the likelihood of permeability. Perhaps the most widely applied geophysical methods for imaging subsurface resistivity is magnetotellurics (MT) due to its relatively great penetration depths. A primary goal of this project is to confirm through ground truthing at existing geothermal systems that MT resistivity structure interpreted integratively is capable of revealing permeable fluid pathways into geothermal systems.

  15. Magnetotelluric Imaging of Lower Crustal Melt and Lithospheric Hydration in the Rocky Mountain Front Transition Zone, Colorado, USA

    Science.gov (United States)

    Feucht, D. W.; Sheehan, A. F.; Bedrosian, P. A.

    2017-12-01

    We present an electrical resistivity model of the crust and upper mantle from two-dimensional (2-D) anisotropic inversion of magnetotelluric data collected along a 450 km transect of the Rio Grande rift, southern Rocky Mountains, and High Plains in Colorado, USA. Our model provides a window into the modern-day lithosphere beneath the Rocky Mountain Front to depths in excess of 150 km. Two key features of the 2-D resistivity model are (1) a broad zone ( 200 km wide) of enhanced electrical conductivity (minerals, with maximum hydration occurring beneath the Rocky Mountain Front. This lithospheric "hydration front" has implications for the tectonic evolution of the continental interior and the mechanisms by which water infiltrates the lithosphere.

  16. Comparison of Linear Prediction Models for Audio Signals

    Directory of Open Access Journals (Sweden)

    2009-03-01

    Full Text Available While linear prediction (LP has become immensely popular in speech modeling, it does not seem to provide a good approach for modeling audio signals. This is somewhat surprising, since a tonal signal consisting of a number of sinusoids can be perfectly predicted based on an (all-pole LP model with a model order that is twice the number of sinusoids. We provide an explanation why this result cannot simply be extrapolated to LP of audio signals. If noise is taken into account in the tonal signal model, a low-order all-pole model appears to be only appropriate when the tonal components are uniformly distributed in the Nyquist interval. Based on this observation, different alternatives to the conventional LP model can be suggested. Either the model should be changed to a pole-zero, a high-order all-pole, or a pitch prediction model, or the conventional LP model should be preceded by an appropriate frequency transform, such as a frequency warping or downsampling. By comparing these alternative LP models to the conventional LP model in terms of frequency estimation accuracy, residual spectral flatness, and perceptual frequency resolution, we obtain several new and promising approaches to LP-based audio modeling.

  17. audio-ultrasonic waves by argon gas discharge

    International Nuclear Information System (INIS)

    Ragheb, M.S.

    2010-01-01

    in the present work, wave emission formed by audio-ultrasonic plasma is investigated. the evidence of the magnetic and electric fields presence is performed by experimental technique. comparison between experimental field measurements and several plasma wave methods reveals the plasma audio-ultrasonic radiations mode. this plasma is a symmetrically driven capacitive discharge, consisting of three interactive regions: the electrodes, the sheaths, and the positive column regions . the discharge voltage is up to 900 volts, the discharge current flowing through the plasma attains a value of 360 mA .the frequency of the discharge voltage covers the audio and the ultrasonic range up to 100 khz. the effective plasma working distance has increased to attain the total length of the tube of 40 cm. a non-disturbing method using an external coil is used to measure the electric discharge field in a plane perpendicular to that of the plasma axe tube. this method proves the existence of a current flowing in a direction perpendicular to the plasma axe tube. a system of minute coils sensors proved the existence of two fields in two perpendicular directions . comparison between different observed fields reveals the existence of propagating electromagnetic waves due to the alternating current flowing through the skin plasma tube. the field intensity distribution along the tube draws the discharge current behavior between the two plasma electrodes that can be used to predict the range of the plasma discharge current.

  18. Automatic summarization of soccer highlights using audio-visual descriptors.

    Science.gov (United States)

    Raventós, A; Quijada, R; Torres, Luis; Tarrés, Francesc

    2015-01-01

    Automatic summarization generation of sports video content has been object of great interest for many years. Although semantic descriptions techniques have been proposed, many of the approaches still rely on low-level video descriptors that render quite limited results due to the complexity of the problem and to the low capability of the descriptors to represent semantic content. In this paper, a new approach for automatic highlights summarization generation of soccer videos using audio-visual descriptors is presented. The approach is based on the segmentation of the video sequence into shots that will be further analyzed to determine its relevance and interest. Of special interest in the approach is the use of the audio information that provides additional robustness to the overall performance of the summarization system. For every video shot a set of low and mid level audio-visual descriptors are computed and lately adequately combined in order to obtain different relevance measures based on empirical knowledge rules. The final summary is generated by selecting those shots with highest interest according to the specifications of the user and the results of relevance measures. A variety of results are presented with real soccer video sequences that prove the validity of the approach.

  19. AusLAMP long period magnetotellurics: progress update and new insights into Victorian geology and mineral prospectivity

    Science.gov (United States)

    Chopping, R. G.; Duan, J.; Czarnota, K.; Kemp, T.

    2016-12-01

    It is becoming generally accepted that world-class mineral deposits have a footprint on a scale of the lithosphere. For this reason, Australia has embarked on the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) to map the conductivity of the mid to lower crust and the lithospheric mantle. AusLAMP is a collaborative project between Geoscience Australia, State and Territory Geological Surveys and Universities. The project aims to collect long-period magnetotelluric data across the Australian continent on a nominal 0.5x0.5° ( 55x55 km) grid. To date, more than 450 sites have been acquired including all sites for the state of Victoria, two-thirds of sites in South Australia and Tasmania, and approximately 25 stations in Western Australia. Progress is ramping up with acquisition to turn to the state of New South Wales, the remainder of South Australia and also acquisition in northern Australia. To support this increasing acquisition activity, additional instruments have been purchased to add to those already in Australia. 3D inversion results are now available for AusLAMP Victoria. In collaboration with the National Computational Infrastructure (NCI), the 3D ModEM codes were optimised for use on the NCI's supercomputer, speeding up large-scale inversions by an order of magnitude. The results of these inversions indicate anomalously conductive lithospheric mantle associated with the central region of Victoria which contains significant mineral deposits and prospectivity, and also anomalous resistive lithosphere associated with the southern extension of the dynamically supported Australian Alps and the Newer Volcanics Province. Modelled conductivities are also consistent with mantle xenolith data from central Victoria. Within the crust, the dominant trend of the data is along elongate north-eastern corridors of conductive material. These results shed new questions on the geological history of this region and the lithospheric architecture of the

  20. Joint Interpretation of Magnetotellurics and Airborne Electromagnetics in the Rathlin Basin, Northern Ireland

    Science.gov (United States)

    Delhaye, Robert; Rath, Volker; Jones, Alan G.; Reay, Derek; The Iretherm Team

    2015-04-01

    In this study we present results from geophysical investigation of the sedimentary Rathlin Basin in Northern Ireland in order to assess the potential for low-to-medium enthalpy geothermal aquifers within the porous Permian and Triassic sandstone groups. The area and groups were identified as a potential geothermal resource due to the presence of both an elevated geothermal gradient (observed in two deep boreholes onshore) and favourable hydraulic properties (measured on core samples in the offshore part of the basin). Previous seismic experiments were not able to fully characterise the sediments beneath the overlying flood basalt. Complementing these earlier results, magnetotelluric data were acquired on a grid of 56 sites across the north-eastern portion of the onshore Rathlin Basin, and an additional 12 sites on the nearby Rathlin Island, in order to image the thickness, depth, and lateral continuity of the target sediments. Analysis and 3D modelling, including the effects of the highly conducting ocean, has been successful in deriving a resistivity model that maps the variation in the top of the sediments (base of the basalts) and the truncation of the basin sediments against the Tow Valley Fault, and gives a reasonable estimate of the thickness of the sediment fill. However, the resulting models show significant effects from distortion caused by near-surface inhomogeneities in the responses that cannot be resolved using the given frequency range and site density. Fortunately, for the area of Rathlin Basin, airborne electromagnetic data from the TELLUS project (http://www.bgs.ac.uk/gsni/tellus/contact/index.html) are available. These data were measured at four frequencies between 0.9 kHz and 25 kHz in a verical-coplanar loop configuration, with the dipole axis in flight direction. The spatial sampling distance was less than 25 m, with about 200 m distance between flight lines. Survey altitudes vary between 56 m and 244 m. Thus, for the top ˜100 m penetrated by

  1. 3-D inversion of synthetic marine magnetotelluric data: resolution and sensitivity

    Science.gov (United States)

    Tada, N.; Baba, K.; Siripunvaraporn, W.; Uyeshima, M.; Utada, H.

    2010-12-01

    In recent years, seafloor magnetotelluric (MT) observation is carried out by using an increasing number of ocean bottom electromagnetometers (OBEMs) not only along a line but also in 2-D array. Thus, imaging electrical conductivity structures under the seafloor in 3-D is now feasible. A 3-D approach is indispensable especially for marine MT data, because the electric and magnetic fields observed at the seafloor are heavily distorted by the rugged seafloor topography and the distribution of land and sea which are generally 3-D. It is very important to incorporate the topography in a 3-D model for an accurate estimation of the conductivity structure beneath seafloor that is generally more resistive than seawater by several orders of magnitude. WSINV3DMT (Siripunvaraporn et al., 2005) is one of 3-D inversion codes that are now of practical use, but the original WSINV3DMT is not applicable to marine MT data because of two reasons. 1) MT responses are calculated only at the boundary corresponding to the Earth surface. 2) We have to use fine mesh design because an observation site must locate exactly at the center of the top surface of a block, which needs large memory that even a highest performance computer can not handle. We propose an extended version of the WSINV3DMT by solving the two problems shown above so that it can be applied to the marine MT data. The extended version of the WSINV3DMT is tested using synthetic models including a 3-D anomaly, seawater and topographic variation. Here shown is an example of a checkerboard test by using a model in which 10 ohm-m and 100 ohm-m blocks are put alternately in both horizontal and vertical directions. The model is composed of 5 blocks in horizontal directions and of 4 blocks in vertical direction with a background of a 31.6 ohm-m half-space below actual topography. The calculation area in the inversion is 7440 × 7440 × 1008 km, and is discretized at 35 blocks in the x and y directions, and 69 blocks in the z

  2. Formal usability evaluation of audio track widget graphical representation for two-dimensional stage audio mixing interface

    OpenAIRE

    Dewey, Christopher; Wakefield, Jonathan P.

    2017-01-01

    The two-dimensional stage paradigm (2DSP) has been suggested as an alternative audio mixing interface (AMI). This study seeks to refine the 2DSP by formally evaluating graphical track visualisation styles. Track visualisations considered were text only, circles containing text, individually coloured circles containing text, circles colour coded by instrument type with text, icons with text superimposed, circles with RMS related dynamic opacity and a traditional AMI. The usability evaluation f...

  3. 1D and 2D Occam's Inversion of Magnetotelluric Data Applied in Volcano-Geothermal Area In Central Java, Indonesia

    International Nuclear Information System (INIS)

    Ariani, Elsi; Srigutomo, Wahyu

    2016-01-01

    One-dimensional (1D) and two-dimensional (2D) magnetotelluric data inversion were conducted to reveal the subsurface resistivity structure beneath the eastern part of a volcano in Central Java, Indonesia. Fifteen magnetotelluric sounding data spanning two lines of investigation were inverted using Occam's inversion scheme. The result depict that there are extensively conductive layer (2-10 ohm meter) below the volcanic overburden. This conductive layer is interpreted as the clay cap resulted from thermal alteration. A higher resistivity layer (10-80 ohm meter) underlies the clay cap and is interpreted as the reservoir whose top boundaries vary between 1000 m above and 2000 m below sea level. (paper)

  4. Solar quiet day ionospheric source current in the West African region.

    Science.gov (United States)

    Obiekezie, Theresa N; Okeke, Francisca N

    2013-05-01

    The Solar Quiet (Sq) day source current were calculated using the magnetic data obtained from a chain of 10 magnetotelluric stations installed in the African sector during the French participation in the International Equatorial Electrojet Year (IEEY) experiment in Africa. The components of geomagnetic field recorded at the stations from January-December in 1993 during the experiment were separated into the source and (induced) components of Sq using Spherical Harmonics Analysis (SHA) method. The range of the source current was calculated and this enabled the viewing of a full year's change in the source current system of Sq.

  5. Solar quiet day ionospheric source current in the West African region

    Directory of Open Access Journals (Sweden)

    Theresa N. Obiekezie

    2013-05-01

    Full Text Available The Solar Quiet (Sq day source current were calculated using the magnetic data obtained from a chain of 10 magnetotelluric stations installed in the African sector during the French participation in the International Equatorial Electrojet Year (IEEY experiment in Africa. The components of geomagnetic field recorded at the stations from January–December in 1993 during the experiment were separated into the source and (induced components of Sq using Spherical Harmonics Analysis (SHA method. The range of the source current was calculated and this enabled the viewing of a full year’s change in the source current system of Sq.

  6. 3-D Magnetotelluric Investigations for geothermal exploration in Martinique (Lesser Antilles). Characteristic Deep Resistivity Structures, and Shallow Resistivity Distribution Matching Heliborne TEM Results

    OpenAIRE

    Coppo , Nicolas; Baltassat , Jean-Michel; Girard , Jean-François; Wawrzyniak , Pierre; Hautot , Sophie; Tarits , Pascal; Jacob , Thomas; Martelet , Guillaume; Mathieu , Francis; Gadalia , Alain; Bouchot , Vincent; Traineau , Hervé

    2015-01-01

    International audience; Within the framework of a global French program oriented towards the development of renewable energies, Martinique Island (Lesser Antilles, France) has been extensively investigated (from 2012 to 2013) through an integrated multi-methods approach, with the aim to define precisely the potential geothermal ressources, previously highlighted (Sanjuan et al., 2003). Amongst the common investigation methods deployed, we carried out three magnetotelluric (MT) surveys located...

  7. Spatio-temporal distribution of brain activity associated with audio-visually congruent and incongruent speech and the McGurk Effect.

    Science.gov (United States)

    Pratt, Hillel; Bleich, Naomi; Mittelman, Nomi

    2015-11-01

    Spatio-temporal distributions of cortical activity to audio-visual presentations of meaningless vowel-consonant-vowels and the effects of audio-visual congruence/incongruence, with emphasis on the McGurk effect, were studied. The McGurk effect occurs when a clearly audible syllable with one consonant, is presented simultaneously with a visual presentation of a face articulating a syllable with a different consonant and the resulting percept is a syllable with a consonant other than the auditorily presented one. Twenty subjects listened to pairs of audio-visually congruent or incongruent utterances and indicated whether pair members were the same or not. Source current densities of event-related potentials to the first utterance in the pair were estimated and effects of stimulus-response combinations, brain area, hemisphere, and clarity of visual articulation were assessed. Auditory cortex, superior parietal cortex, and middle temporal cortex were the most consistently involved areas across experimental conditions. Early (visual cortex. Clarity of visual articulation impacted activity in secondary visual cortex and Wernicke's area. McGurk perception was associated with decreased activity in primary and secondary auditory cortices and Wernicke's area before 100 msec, increased activity around 100 msec which decreased again around 180 msec. Activity in Broca's area was unaffected by McGurk perception and was only increased to congruent audio-visual stimuli 30-70 msec following consonant onset. The results suggest left hemisphere prominence in the effects of stimulus and response conditions on eight brain areas involved in dynamically distributed parallel processing of audio-visual integration. Initially (30-70 msec) subcortical contributions to auditory cortex, superior parietal cortex, and middle temporal cortex occur. During 100-140 msec, peristriate visual influences and Wernicke's area join in the processing. Resolution of incongruent audio-visual inputs is then

  8. Insects and the Kafkaesque: Insectuous Re-Writings in Visual and Audio-Visual Media

    Directory of Open Access Journals (Sweden)

    Damianos Grammatikopoulos

    2017-09-01

    Full Text Available In this article, I examine techniques at work in visual and audio-visual media that deal with the creative imitation of central Kafkan themes, particularly those related to hybrid insects and bodily deformity. In addition, the opening section of my study offers a detailed and thorough discussion of the concept of the “Kafkaesque”, and an attempt will be made to circumscribe its signifying limits. The main objective of the study is to explore the relationship between Kafka’s texts and the works of contemporary cartoonists, illustrators (Charles Burns, and filmmakers (David Cronenberg and identify themes and motifs that they have in common. My approach is informed by transtextual practices and source studies, and I draw systematically on Gerard Genette’s Palimpsests and Harold Bloom’s The Anxiety of Influence.

  9. Ambiguity Function Analysis and Processing for Passive Radar Based on CDR Digital Audio Broadcasting

    Directory of Open Access Journals (Sweden)

    Zhang Qiang

    2015-01-01

    Full Text Available China Digital Radio (CDR broadcasting is a new standard of digital audio broadcasting of FM frequency (87–108 MHz based on our research and development efforts. It is compatible with the frequency spectrum in analog FM radio and satisfies the requirements for smooth transition from analog to digital signal in FM broadcasting in China. This paper focuses on the signal characteristics and processing methods of radio-based passive radar. The signal characteristics and ambiguity function of a passive radar illumination source are analyzed. The adverse effects on the target detection of the side peaks owing to cyclic prefix, the Doppler ambiguity strips because of signal synchronization, and the range of side peaks resulting from the signal discontinuous spectrum are then studied. Finally, methods for suppressing these side peaks are proposed and their effectiveness is verified by simulations.

  10. Audio-visual temporal recalibration can be constrained by content cues regardless of spatial overlap

    Directory of Open Access Journals (Sweden)

    Warrick eRoseboom

    2013-04-01

    Full Text Available It has now been well established that the point of subjective synchrony for audio and visual events can be shifted following exposure to asynchronous audio-visual presentations, an effect often referred to as temporal recalibration. Recently it was further demonstrated that it is possible to concurrently maintain two such recalibrated, and opposing, estimates of audio-visual temporal synchrony. However, it remains unclear precisely what defines a given audio-visual pair such that it is possible to maintain a temporal relationship distinct from other pairs. It has been suggested that spatial separation of the different audio-visual pairs is necessary to achieve multiple distinct audio-visual synchrony estimates. Here we investigated if this was necessarily true. Specifically, we examined whether it is possible to obtain two distinct temporal recalibrations for stimuli that differed only in featural content. Using both complex (audio visual speech; Experiment 1 and simple stimuli (high and low pitch audio matched with either vertically or horizontally oriented Gabors; Experiment 2 we found concurrent, and opposite, recalibrations despite there being no spatial difference in presentation location at any point throughout the experiment. This result supports the notion that the content of an audio-visual pair can be used to constrain distinct audio-visual synchrony estimates regardless of spatial overlap.

  11. A listening test system for automotive audio - listeners

    DEFF Research Database (Denmark)

    Choisel, Sylvain; Hegarty, Patrick; Christensen, Flemming

    2007-01-01

    A series of experiments was conducted in order to validate an experimental procedure to perform listening tests on car audio systems in a simulation of the car environment in a laboratory, using binaural synthesis with head-tracking. Seven experts and 40 non-expert listeners rated a range...... of stimuli for 15 sound-quality attributes developed by the experts. This paper presents a comparison between the attribute ratings from the two groups of participants. Overall preference of the non-experts was also measured using direct ratings as well as indirect scaling based on paired comparisons...

  12. Digital audio recordings improve the outcomes of patient consultations

    DEFF Research Database (Denmark)

    Wolderslund, Maiken; Kofoed, Poul-Erik; Holst, René

    2017-01-01

    OBJECTIVES: To investigate the effects on patients' outcome of the consultations when provided with: a Digital Audio Recording (DAR) of the consultation and a Question Prompt List (QPL). METHODS: This is a three-armed randomised controlled cluster trial. One group of patients received standard care......, while the other two groups received either the QPL in combination with a recording of their consultation or only the recording. Patients from four outpatient clinics participated: Paediatric, Orthopaedic, Internal Medicine, and Urology. The effects were evaluated by patient-administered questionnaires...

  13. Audio-haptic interaction in simulated walking experiences

    DEFF Research Database (Denmark)

    Serafin, Stefania

    2011-01-01

    and interchangeable use of the haptic and auditory modality in floor interfaces, and for the synergy of perception and action in capturing and guiding human walking. We describe the technology developed in the context of this project, together with some experiments performed to evaluate the role of auditory......In this paper an overview of the work conducted on audio-haptic physically based simulation and evaluation of walking is provided. This work has been performed in the context of the Natural Interactive Walking (NIW) project, whose goal is to investigate possibilities for the integrated...... and haptic feedback in walking tasks....

  14. An assessment of individualized technical ear training for audio production.

    Science.gov (United States)

    Kim, Sungyoung

    2015-07-01

    An individualized technical ear training method is compared to a non-individualized method. The efficacy of the individualized method is assessed using a standardized test conducted before and after the training period. Participants who received individualized training improved better than the control group on the test. Results indicate the importance of individualized training for acquisition of spectrum-identification and spectrum-matching skills. Individualized training, therefore, should be implemented by default into technical ear training programs used in audio production industry and education.

  15. Sinusoidal Analysis-Synthesis of Audio Using Perceptual Criteria

    Science.gov (United States)

    Painter, Ted; Spanias, Andreas

    2003-12-01

    This paper presents a new method for the selection of sinusoidal components for use in compact representations of narrowband audio. The method consists of ranking and selecting the most perceptually relevant sinusoids. The idea behind the method is to maximize the matching between the auditory excitation pattern associated with the original signal and the corresponding auditory excitation pattern associated with the modeled signal that is being represented by a small set of sinusoidal parameters. The proposed component-selection methodology is shown to outperform the maximum signal-to-mask ratio selection strategy in terms of subjective quality.

  16. Digital video and audio broadcasting technology a practical engineering guide

    CERN Document Server

    Fischer, Walter

    2010-01-01

    Digital Video and Audio Broadcasting Technology - A Practical Engineering Guide' deals with all the most important digital television, sound radio and multimedia standards such as MPEG, DVB, DVD, DAB, ATSC, T-DMB, DMB-T, DRM and ISDB-T. The book provides an in-depth look at these subjects in terms of practical experience. In addition it contains chapters on the basics of technologies such as analog television, digital modulation, COFDM or mathematical transformations between time and frequency domains. The attention in the respective field under discussion is focussed on aspects of measuring t

  17. Synthesis of audio spectra using a diffraction model.

    Science.gov (United States)

    Vijayakumar, V; Eswaran, C

    2006-12-01

    It is shown that the intensity variations of an audio signal in the frequency domain can be obtained by using a mathematical function containing a series of weighted complex Bessel functions. With proper choice of values for two parameters, this function can transform an input spectrum of discrete frequencies of unit intensity into the known spectra of different musical instruments. Specific examples of musical instruments are considered for evaluating the performance of this method. It is found that this function yields musical spectra with a good degree of accuracy.

  18. The complete guide to high-end audio

    CERN Document Server

    Harley, Robert

    2015-01-01

    An updated edition of what many consider the "bible of high-end audio"   In this newly revised and updated fifth edition, Robert Harley, editor in chief of the Absolute Sound magazine, tells you everything you need to know about buying and enjoying high-quality hi-fi. With this book, discover how to get the best sound for your money, how to identify the weak links in your system and upgrade where it will do the most good, how to set up and tweak your system for maximum performance, and how to become a more perceptive and appreciative listener. Just a few of the secrets you will learn cover hi

  19. [Voix d'Or, an audio tool to revive memories].

    Science.gov (United States)

    Braunschweig, Lina

    2010-01-01

    Voix d'Or is an audio tool designed to awaken the affective memory of elderly people and particularly those suffering from Alzheimer's disease. Every month it offers new radio programmes to initiate or facilitate leisure and entertainment activities, memory workshops or provide the basis of quiet moments. The tool has a double objective: to procure well-being, boost the individual's self-esteem and recognise his/her history and to facilitate exchange and communication between the residents and the staff of a care home.

  20. Amplificador de audio en clase A para auriculares

    OpenAIRE

    Martín Ruiz, Manuel

    2012-01-01

    El presente proyecto muestra el desarrollo, la simulación y la implantación de un amplificador de audio de altas prestaciones, empleando para ello transistores discretos y amplificadores operacionales sobre una PCB diseñada previamente con un programa software. La aplicación de este amplificador será como amplificador de potencia para auriculares de alta impedancia. El circuito empleará una técnica de realimentación directa sobre los auriculares conectados a 4 hilos. El amplificador incorpora...

  1. Tools for signal compression applications to speech and audio coding

    CERN Document Server

    Moreau, Nicolas

    2013-01-01

    This book presents tools and algorithms required to compress/uncompress signals such as speech and music. These algorithms are largely used in mobile phones, DVD players, HDTV sets, etc. In a first rather theoretical part, this book presents the standard tools used in compression systems: scalar and vector quantization, predictive quantization, transform quantization, entropy coding. In particular we show the consistency between these different tools. The second part explains how these tools are used in the latest speech and audio coders. The third part gives Matlab programs simulating t

  2. Using Audio-Derived Affective Offset to Enhance TV Recommendation

    DEFF Research Database (Denmark)

    Shepstone, Sven Ewan; Tan, Zheng-Hua; Jensen, Søren Holdt

    2014-01-01

    . First a user's mood profile is determined using 12-class audio-based emotion classifications . An initial TV content item is then displayed to the user based on the extracted mood profile. The user has the option to either accept the recommendation, or to critique the item once or several times......, by navigating the emotion space to request an alternative match. The final match is then compared to the initial match, in terms of the difference in the items' affective parameterization . This offset is then utilized in future recommendation sessions. The system was evaluated by eliciting three different...

  3. MP3 audio-editing software for the department of radiology

    International Nuclear Information System (INIS)

    Hong Qingfen; Sun Canhui; Li Ziping; Meng Quanfei; Jiang Li

    2006-01-01

    Objective: To evaluate the MP3 audio-editing software in the daily work in the department of radiology. Methods: The audio content of daily consultation seminar, held in the department of radiology every morning, was recorded and converted into MP3 audio format by a computer integrated recording device. The audio data were edited, archived, and eventually saved in the computer memory storage media, which was experimentally replayed and applied in the research or teaching. Results: MP3 audio-editing was a simple process and convenient for saving and searching the data. The record could be easily replayed. Conclusion: MP3 audio-editing perfectly records and saves the contents of consultation seminar, and has replaced the conventional hand writing notes. It is a valuable tool in both research and teaching in the department. (authors)

  4. Direct-conversion switching-mode audio power amplifier with active capacitive voltage clamp

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.

    2005-01-01

    This paper discusses the advantages and problems when implementing direct energy conversion switching-mode audio power amplifiers. It is shown that the total integration of the power supply and Class D audio power amplifier into one compact direct converter can simplify the design, increase...... efficiency, reduce the product volume and lower its cost. As an example, the principle of operation and the measurements made on a direct-conversion switching-mode audio power amplifier with active capacitive voltage clamp are presented....

  5. Automatic processing of CERN video, audio and photo archives

    Energy Technology Data Exchange (ETDEWEB)

    Kwiatek, M [CERN, Geneva (Switzerland)], E-mail: Michal.Kwiatek@cem.ch

    2008-07-15

    The digitalization of CERN audio-visual archives, a major task currently in progress, will generate over 40 TB of video, audio and photo files. Storing these files is one issue, but a far more important challenge is to provide long-time coherence of the archive and to make these files available on-line with minimum manpower investment. An infrastructure, based on standard CERN services, has been implemented, whereby master files, stored in the CERN Distributed File System (DFS), are discovered and scheduled for encoding into lightweight web formats based on predefined profiles. Changes in master files, conversion profiles or in the metadata database (read from CDS, the CERN Document Server) are automatically detected and the media re-encoded whenever necessary. The encoding processes are run on virtual servers provided on-demand by the CERN Server Self Service Centre, so that new servers can be easily configured to adapt to higher load. Finally, the generated files are made available from the CERN standard web servers with streaming implemented using Windows Media Services.

  6. Theory and Application of Audio-Based Assessment of Cough

    Directory of Open Access Journals (Sweden)

    Yan Shi

    2018-01-01

    Full Text Available Cough is a common symptom of many respiratory diseases. Many medical literatures underline that a system for the automatic, objective, and reliable detection of cough events is important and very promising to detect pathology severity in chronic cough disease. In order to track the development status of an audio-based cough monitoring system, we briefly described the history of objective cough detection and then illustrated the cough sound generating principle. The probable endpoints of cough clinical studies, including cough frequency, intensity of coughing, and acoustic properties of cough sound, were analyzed in this paper. Finally, we introduce some successful cough monitoring equipment and their recognition algorithm in detail. It can be obtained that, firstly, acoustic variability of cough sounds within and between individuals makes it difficult to assess the intensity of coughing. Furthermore, now great progress in audio-based cough detection is being made. Moreover, accurate portable objective monitoring systems will be available and widely used in home care and clinical trials in the near future.

  7. Automatic processing of CERN video, audio and photo archives

    International Nuclear Information System (INIS)

    Kwiatek, M

    2008-01-01

    The digitalization of CERN audio-visual archives, a major task currently in progress, will generate over 40 TB of video, audio and photo files. Storing these files is one issue, but a far more important challenge is to provide long-time coherence of the archive and to make these files available on-line with minimum manpower investment. An infrastructure, based on standard CERN services, has been implemented, whereby master files, stored in the CERN Distributed File System (DFS), are discovered and scheduled for encoding into lightweight web formats based on predefined profiles. Changes in master files, conversion profiles or in the metadata database (read from CDS, the CERN Document Server) are automatically detected and the media re-encoded whenever necessary. The encoding processes are run on virtual servers provided on-demand by the CERN Server Self Service Centre, so that new servers can be easily configured to adapt to higher load. Finally, the generated files are made available from the CERN standard web servers with streaming implemented using Windows Media Services

  8. A compact electroencephalogram recording device with integrated audio stimulation system

    Science.gov (United States)

    Paukkunen, Antti K. O.; Kurttio, Anttu A.; Leminen, Miika M.; Sepponen, Raimo E.

    2010-06-01

    A compact (96×128×32 mm3, 374 g), battery-powered, eight-channel electroencephalogram recording device with an integrated audio stimulation system and a wireless interface is presented. The recording device is capable of producing high-quality data, while the operating time is also reasonable for evoked potential studies. The effective measurement resolution is about 4 nV at 200 Hz sample rate, typical noise level is below 0.7 μVrms at 0.16-70 Hz, and the estimated operating time is 1.5 h. An embedded audio decoder circuit reads and plays wave sound files stored on a memory card. The activities are controlled by an 8 bit main control unit which allows accurate timing of the stimuli. The interstimulus interval jitter measured is less than 1 ms. Wireless communication is made through bluetooth and the data recorded are transmitted to an external personal computer (PC) interface in real time. The PC interface is implemented with LABVIEW® and in addition to data acquisition it also allows online signal processing, data storage, and control of measurement activities such as contact impedance measurement, for example. The practical application of the device is demonstrated in mismatch negativity experiment with three test subjects.

  9. Audio-Visual Speech Recognition Using MPEG-4 Compliant Visual Features

    Directory of Open Access Journals (Sweden)

    Petar S. Aleksic

    2002-11-01

    Full Text Available We describe an audio-visual automatic continuous speech recognition system, which significantly improves speech recognition performance over a wide range of acoustic noise levels, as well as under clean audio conditions. The system utilizes facial animation parameters (FAPs supported by the MPEG-4 standard for the visual representation of speech. We also describe a robust and automatic algorithm we have developed to extract FAPs from visual data, which does not require hand labeling or extensive training procedures. The principal component analysis (PCA was performed on the FAPs in order to decrease the dimensionality of the visual feature vectors, and the derived projection weights were used as visual features in the audio-visual automatic speech recognition (ASR experiments. Both single-stream and multistream hidden Markov models (HMMs were used to model the ASR system, integrate audio and visual information, and perform a relatively large vocabulary (approximately 1000 words speech recognition experiments. The experiments performed use clean audio data and audio data corrupted by stationary white Gaussian noise at various SNRs. The proposed system reduces the word error rate (WER by 20% to 23% relatively to audio-only speech recognition WERs, at various SNRs (0–30 dB with additive white Gaussian noise, and by 19% relatively to audio-only speech recognition WER under clean audio conditions.

  10. On the relative importance of audio and video in the presence of packet losses

    DEFF Research Database (Denmark)

    Korhonen, Jari; Reiter, Ulrich; Myakotnykh, Eugene

    2010-01-01

    In streaming applications, unequal protection of audio and video tracks may be necessary to maintain the optimal perceived overall quality. For this purpose, the application should be aware of the relative importance of audio and video in an audiovisual sequence. In this paper, we propose...... a subjective test arrangement for finding the optimal tradeoff between subjective audio and video qualities in situations when it is not possible to have perfect quality for both modalities concurrently. Our results show that content poses a significant impact on the preferred compromise between audio...... and video quality, but also that the currently used classification criteria for content are not sufficient to predict the users’ preference...

  11. Paper-Based Textbooks with Audio Support for Print-Disabled Students.

    Science.gov (United States)

    Fujiyoshi, Akio; Ohsawa, Akiko; Takaira, Takuya; Tani, Yoshiaki; Fujiyoshi, Mamoru; Ota, Yuko

    2015-01-01

    Utilizing invisible 2-dimensional codes and digital audio players with a 2-dimensional code scanner, we developed paper-based textbooks with audio support for students with print disabilities, called "multimodal textbooks." Multimodal textbooks can be read with the combination of the two modes: "reading printed text" and "listening to the speech of the text from a digital audio player with a 2-dimensional code scanner." Since multimodal textbooks look the same as regular textbooks and the price of a digital audio player is reasonable (about 30 euro), we think multimodal textbooks are suitable for students with print disabilities in ordinary classrooms.

  12. Magnetotelluric and aeromagnetic investigations for assessment of groundwater resources in Parnaiba basin in Piaui State of North-East Brazil

    Science.gov (United States)

    Chandrasekhar, E.; Fontes, Sergio L.; Flexor, Jean M.; Rajaram, Mita; Anand, S. P.

    2009-06-01

    In an attempt to locate the presence of possible groundwater resource regions in the semi-arid North-East Brazil, an integrated survey including aeromagnetic and magnetotelluric (MT) studies have been undertaken in the Guaribas region and only MT survey in the Caracol region. In the Guaribas region the aeromagnetic data, its analytic signal and Euler solutions reveal several subsurface small-scale faults and intrusives that are conducive to be potential groundwater resource regions. A total of about 22 broad-band magnetotelluric (MT) soundings in the period range of 0.006-300 s along two profiles on the marginal arcs of the intra-cratonic sedimentary Parnaíba basin in North-East Brazil have been made across the regional geological strike, the Senador Pompeu Lineament (SPL). SPL trends N40°E and marks a basement high reflecting an irregularity in the original basin geometry. While one of the MT profiles traverses across the SPL, the other lies only in the aeromagnetically surveyed sedimentary region. Two-dimensional inversion of MT data of both profiles shows that the sedimentary basin is conductive (100-150 Ω m) and shows as a thin graben with an average thickness of about 2-3 km beneath both profiles. The basin is located to be at shallow depths (from surface to about 500 m). Based on the facts that the study region falls on sedimentary region having low-to-very low permeability and also in accordance with the subsurface lithology around the study region, the mapped sedimentary basin largely manifests the zone of potential sedimentary aquifer having moderate resistivity of 50-250 Ω m and is located at relatively shallow depths. The identified aquifer zone is believed to have links with the Parnaiba River flowing at a distance of about 300 km NW from the study region. We discuss interpretation of our results of MT and aeromagnetic data sets in the light of hydrological features of the study region.

  13. Investigating collapse structures in oceanic islands using magnetotelluric surveys: The case of Fogo Island in Cape Verde

    Science.gov (United States)

    Martínez-Moreno, F. J.; Monteiro Santos, F. A.; Madeira, J.; Pous, J.; Bernardo, I.; Soares, A.; Esteves, M.; Adão, F.; Ribeiro, J.; Mata, J.; Brum da Silveira, A.

    2018-05-01

    One of the most remarkable natural events on Earth are the large lateral flank collapses of oceanic volcanoes, involving volumes of rock exceeding tens of km3. These collapses are relatively frequent in recent geological times as supported by evidence found in the geomorphology of volcanic island edifices and associated debris flows deposited on the proximal ocean floor. The Island of Fogo in the Cape Verde archipelago is one of the most active and prominent oceanic volcanoes on Earth. The island has an average diameter of 25 km and reaches a maximum elevation of 2829 m above sea level (m a.s.l.) at Pico do Fogo, a young stratovolcano located within a summit depression open eastward due to a large lateral flank collapse. The sudden collapse of the eastern flank of Fogo Island produced a megatsunami 73 ky ago. The limits of the flank collapse were deduced as well from geomorphologic markers within the island. The headwall of the collapse scar is interpreted as either being located beneath the post-collapse volcanic infill of the summit depression or located further west, corresponding to the Bordeira wall that partially surrounds it. The magnetotelluric (MT) method provides a depth distribution of the ground resistivity obtained by the simultaneous measurement of the natural variations of the electric and magnetic field of the Earth. Two N-S magnetotelluric profiles were acquired across the collapsed area to determine its geometry and boundaries. The acquired MT data allowed the determination of the limits of the collapsed area more accurately as well as its morphology at depth and thickness of the post-collapse infill. According to the newly obtained MT data and the bathymetry of the eastern submarine flank of Fogo, the volume involved in the flank collapse is estimated in 110 km3. This volume -the first calculated onshore- stands between the previously published more conservative and excessive calculations -offshore- that were exclusively based in geomorphic

  14. Global nonlinear optimization for the estimation of static shift and interpretation of 1-D magnetotelluric sounding data

    Directory of Open Access Journals (Sweden)

    Arkoprovo Biswas

    2011-07-01

    Full Text Available In the presence of conducting inhomogeneities in near-surface structures, apparent resistivity data in magnetotelluric sounding can be severely distorted. This is due to electric fields generated from boundary charges on surficial inhomogeneities. Such distortion persists throughout the entire recording range and is known as static shift in magnetotellurics. Frequency-independent static shifts manifest as vertical, parallel shifts that occur in plots of the dual logarithmic scale of apparent resistivity versus time period. The phase of magnetotelluric sounding data remains unaffected by the static shift and can be used to remove the static shift to some extent. However, individual inversion of phase data yields highly nonunique results, and alone it will not work to correctly remove the static shift. Inversions of uncorrected magnetotelluric data yield erroneous and unreliable estimations, while static-shift-corrected magnetotelluric data provide better and reliable estimations of the resistivities and thicknesses of subsurface structures. In the present study, static shift (a frequency-independent real constant is also considered as one of the model parameters and is optimized together with other model parameters (resistivity and thickness using the very fast simulated annealing global inversion technique. This implies that model parameters are determined simultaneously with the estimate of the static shift in the data. Synthetic and noisy data generated for a number of models are interpreted, to demonstrate the efficacy of the approach to yield reliable estimates of subsurface structures when the apparent resistivity data are affected by static shift. Individual inversions of static-shift-affected apparent resistivity data and phase data yield unreliable estimations of the model parameters. Furthermore, the estimated model parameters after individual data inversions do not show any systematic correlations with the amount of static shift in the

  15. “A Real China” on User-Generated Videos? Audio-Visual Narratives of Confucianism

    Directory of Open Access Journals (Sweden)

    Jianxiu Hao

    2014-03-01

    Full Text Available Beneath the “Chinese successful story”, social stratification, class polarization, and cultural displacement have been accelerated. The Chinese Communist Party has not found a coherent solution to the challenges of reconciling social interests, since Communism has been more and more becoming mere “lip service”. However, it has been claimed that Confucian values can provide sources to dissolve the downsides of modernization in contemporary Chinese society. This study intends to investigate the revival of Confucianism, as a source for criticism and construction in Chinese socio-culture, as portrayed in user-generated videos which are produced/consumed by the largest Internet using population in the world, under the Chinese authoritarian regime which controls over communication. By means of a thematic audio-visual narrative analysis, this study has investigated 20 hours of Youku Paike videos published between 2007 and 2013. It has been detected:  (1 about one third of the user-generated videos can be interpreted as Confucian thematic narratives; and there is a slightly increasing trend portraying Confucian values; (2 Confucianism can become a source for the formation of a new online socio-culture, in the circumstances of China’s modernization and cyberization, to advocate social actors’ cultivation and humanity’s flourishing.

  16. 3D-Audio Matting, Postediting, and Rerendering from Field Recordings

    Directory of Open Access Journals (Sweden)

    Guillaume Lemaitre

    2007-01-01

    Full Text Available We present a novel approach to real-time spatial rendering of realistic auditory environments and sound sources recorded live, in the field. Using a set of standard microphones distributed throughout a real-world environment, we record the sound field simultaneously from several locations. After spatial calibration, we segment from this set of recordings a number of auditory components, together with their location. We compare existing time delay of arrival estimation techniques between pairs of widely spaced microphones and introduce a novel efficient hierarchical localization algorithm. Using the high-level representation thus obtained, we can edit and rerender the acquired auditory scene over a variety of listening setups. In particular, we can move or alter the different sound sources and arbitrarily choose the listening position. We can also composite elements of different scenes together in a spatially consistent way. Our approach provides efficient rendering of complex soundscapes which would be challenging to model using discrete point sources and traditional virtual acoustics techniques. We demonstrate a wide range of possible applications for games, virtual and augmented reality, and audio visual post production.

  17. A large hydrothermal reservoir beneath Taal Volcano (Philippines) revealed by magnetotelluric observations and its implications to the volcanic activity.

    Science.gov (United States)

    Alanis, Paul K B; Yamaya, Yusuke; Takeuchi, Akihiro; Sasai, Yoichi; Okada, Yoshihiro; Nagao, Toshiyasu

    2013-01-01

    Taal Volcano is one of the most active volcanoes in the Philippines. The magnetotelluric 3D forward analyses indicate the existence of a large high resistivity anomaly (∼100 Ω·m) with a volume of at least 3 km×3 km×3 km, which is capped by a conductive layer (∼10 Ω·m), beneath the Main Crater. This high resistivity anomaly is hypothesized to be a large hydrothermal reservoir, consisting of the aggregate of interconnected cracks in rigid and dense host rocks, which are filled with hydrothermal fluids coming from a magma batch below the reservoir. The hydrothermal fluids are considered partly in gas phase and liquid phase. The presence of such a large hydrothermal reservoir and the stagnant magma below may have influences on the volcano's activity. Two possibilities are presented. First, the 30 January 1911 explosion event was a magmatic hydrothermal eruption rather than a base-surge associated with a phreato-magmatic eruption. Second, the earlier proposed four eruption series may be better interpreted by two cycles, each consisting of series of summit and flank eruptions.

  18. A new magnetotelluric monitoring network operating in Agri Valley (Southern Italy: study of stability of apparent resistivity estimates

    Directory of Open Access Journals (Sweden)

    L. Telesca

    2008-06-01

    Full Text Available Variations detected in geophysical, especially electromagnetic, parameters in seismic active areas have been sometimes attributed to modifications of the stress field. Among the different geophysical methods, magnetotellurics (MT could be one of the most effective because it allows us to explore down to seismogenic depths. Continuous MT recording could allow us to evaluate whether possible variations are significantly correlated with the seismic activity of investigated area. To assess the significance of such observations we must be able to say how well an apparent resistivity curve should be reproduced when measurements are repeated at a later time. To do this properly it is essential to know that the estimated error bars accurately represent the true uncertainties in comparing the transfer functions. In this work we will show the preliminary results obtained from the analysis of the data coming from the new MT monitoring network installed in Agri Valley. This analysis gives us the possibility: i to better study the temporal stability of the signals, ii to better discriminate the noise affecting the measures by remote reference estimation. The performed analysis disclosed a relatively low degree of noise in the investigated area, which is a promising condition for monitoring.

  19. Three-dimensional magnetotelluric modeling using SLDM method; Supekutoru bunkai wo fukashita ranchosu process ni motozuku MT ho sanjigen keisan

    Energy Technology Data Exchange (ETDEWEB)

    Yamane, K; Takasugi, S [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan)

    1996-10-01

    For 3-D magnetotelluric (MT) modeling, spectral Lanczos decomposition method (SLDM) was applied as high-speed high- accuracy modeling algorithm. SLDM was developed by Druskin to reduce computational time considerably by obtaining responses in the whole frequency domain all at once. The computational time of 3-D modeling was reduced by introducing Maxwell`s equation and Lanczos matrix as transformation matrix. The computation was carried out on the 1km{times}2km{times}2km low resistivity model body of 5 ohm{center_dot}m supposed in the uniform ground of 100 ohm{center_dot}m using 43{times}43{times}31 nodes at 17 frequencies ranging from 0.01Hz to 100Hz. Apparent resistivity at lower frequency decreased with approach to the low resistivity body. The computational time amounted to 6 hours 14 minutes. The 3-D MT modeling using SLDM method was independent of frequency, and its algorithm was superior in computational speed, however, it was inferior in computational time as the number of measuring nodes increased. 2 refs., 3 figs.

  20. PDE-based geophysical modelling using finite elements: examples from 3D resistivity and 2D magnetotellurics

    Science.gov (United States)

    Schaa, R.; Gross, L.; du Plessis, J.

    2016-04-01

    We present a general finite-element solver, escript, tailored to solve geophysical forward and inverse modeling problems in terms of partial differential equations (PDEs) with suitable boundary conditions. Escript’s abstract interface allows geoscientists to focus on solving the actual problem without being experts in numerical modeling. General-purpose finite element solvers have found wide use especially in engineering fields and find increasing application in the geophysical disciplines as these offer a single interface to tackle different geophysical problems. These solvers are useful for data interpretation and for research, but can also be a useful tool in educational settings. This paper serves as an introduction into PDE-based modeling with escript where we demonstrate in detail how escript is used to solve two different forward modeling problems from applied geophysics (3D DC resistivity and 2D magnetotellurics). Based on these two different cases, other geophysical modeling work can easily be realized. The escript package is implemented as a Python library and allows the solution of coupled, linear or non-linear, time-dependent PDEs. Parallel execution for both shared and distributed memory architectures is supported and can be used without modifications to the scripts.

  1. PDE-based geophysical modelling using finite elements: examples from 3D resistivity and 2D magnetotellurics

    International Nuclear Information System (INIS)

    Schaa, R; Gross, L; Du Plessis, J

    2016-01-01

    We present a general finite-element solver, escript, tailored to solve geophysical forward and inverse modeling problems in terms of partial differential equations (PDEs) with suitable boundary conditions. Escript’s abstract interface allows geoscientists to focus on solving the actual problem without being experts in numerical modeling. General-purpose finite element solvers have found wide use especially in engineering fields and find increasing application in the geophysical disciplines as these offer a single interface to tackle different geophysical problems. These solvers are useful for data interpretation and for research, but can also be a useful tool in educational settings. This paper serves as an introduction into PDE-based modeling with escript where we demonstrate in detail how escript is used to solve two different forward modeling problems from applied geophysics (3D DC resistivity and 2D magnetotellurics). Based on these two different cases, other geophysical modeling work can easily be realized. The escript package is implemented as a Python library and allows the solution of coupled, linear or non-linear, time-dependent PDEs. Parallel execution for both shared and distributed memory architectures is supported and can be used without modifications to the scripts. (paper)

  2. Resistivity Image from 2D Inversion of Magnetotelluric Data in the Northern Cascadia Subduction Zone (United States)

    Science.gov (United States)

    Gultom, F. B.; Niasari, S. W.; Hartantyo, E.

    2018-04-01

    Cascadia Subduction Zone (CSZ) lies between Pacific margin and North America plate. The purpose of this research is to identify the CSZ along Oregon, Idaho, Wyoming from conductivity (σ) contrast in the subsurface by using the magnetotelluric (MT) method. MT is an electromagnetic method that use frequency between 10-4 Hz and 104 Hz. We obtained the MT data from the EarthScope USArray in the form of EDI-File (five components of the electromagnetic field). We analyzed the MT data using phase tensor and modeled the data using 2D inversion. From the phase tensor analysis, the 3D data dominated the eastern regions. Global data misfit is 6,88, where WYI18 (close to Yellowstone) contributes misfit of 29,3. This means that the model response does not fit the data, which implies the data is not fully 2D. The 2D inversion results are found high resistivity anomalies (more than 500 ohm.m) at shallow depth beneath Oregon and Wyoming, which coresspond to high density anomalies. This high resistivity anomalies might correspond to the north American plate. Thus, it can be concluded that 2D inversion model can be used for most 3D MT data to illustrate the resistivity distribution in the Cascadia Subduction Zone.

  3. Exploring the Gross Schoenebeck (Germany) geothermal site using a statistical joint interpretation of magnetotelluric and seismic tomography models

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, Gerard; Bauer, Klaus; Moeck, Inga; Schulze, Albrecht; Ritter, Oliver [Deutsches GeoForschungsZentrum (GFZ), Telegrafenberg, 14473 Potsdam (Germany)

    2010-03-15

    Exploration for geothermal resources is often challenging because there are no geophysical techniques that provide direct images of the parameters of interest, such as porosity, permeability and fluid content. Magnetotelluric (MT) and seismic tomography methods yield information about subsurface distribution of resistivity and seismic velocity on similar scales and resolution. The lack of a fundamental law linking the two parameters, however, has limited joint interpretation to a qualitative analysis. By using a statistical approach in which the resistivity and velocity models are investigated in the joint parameter space, we are able to identify regions of high correlation and map these classes (or structures) back onto the spatial domain. This technique, applied to a seismic tomography-MT profile in the area of the Gross Schoenebeck geothermal site, allows us to identify a number of classes in accordance with the local geology. In particular, a high-velocity, low-resistivity class is interpreted as related to areas with thinner layers of evaporites; regions where these sedimentary layers are highly fractured may be of higher permeability. (author)

  4. Visualization of Broadband Sound Sources

    OpenAIRE

    Sukhanov Dmitry; Erzakova Nadezhda

    2016-01-01

    In this paper the method of imaging of wideband audio sources based on the 2D microphone array measurements of the sound field at the same time in all the microphones is proposed. Designed microphone array consists of 160 microphones allowing to digitize signals with a frequency of 7200 Hz. Measured signals are processed using the special algorithm that makes it possible to obtain a flat image of wideband sound sources. It is shown experimentally that the visualization is not dependent on the...

  5. A Smart Audio on Demand Application on Android Systems

    Directory of Open Access Journals (Sweden)

    Ing-Jr Ding

    2015-05-01

    Full Text Available This paper describes a study of the realization of intelligent Audio on Demand (AOD processing in the embedded system environment. This study describes the development of innovative Android software that will enhance user experience of the increasingly popular number of smart mobile devices now available on the market. The application we developed can accumulate records of the songs that are played and automatically analyze the favorite song types of a user. The application can also select sound control playback functions to make operation more convenient. A large number of different types of music genre were collected to create a sound database and build an intelligent AOD processing mechanism. Formant analysis was used to extract voice features and the K-means clustering method and acoustic modeling technology of the Gaussian mixture model (GMM were used to study and develop the application mechanism. The processes we developed run smoothly in the embedded Android platform.

  6. Audio- and TV-products. Power consumption reduction in audio- and TV-products. Final report; Audio- og TV-produkter. Effektminimering i audio- og TV-produkter: Afsluttende rapport

    Energy Technology Data Exchange (ETDEWEB)

    Kierkegaard, P.

    1998-10-01

    The project concerning the audio products resulted in energy savings of 90-97% at efficiencies of 91-96% with full effect and stand-by losses of 0.4-3 W. It is especially new epoch-making methods for pulse modulation (called Controlled Oscillation Modulator, COM and Phase Shifted Carrier Pulse Width Modulation, PSCPWM) and error for correction in the effect conversion (called Multivariable Enhanced Cascade Control, MECC and Pulse Edge Delay Error Correction, PEDEC), which has made the breakthrough. Two patents have been applied for, and new digital amplifiers will be introduced in all the relevant products. The project concerning TV products has shown that a loss reduction in deflecting circuits of ca.20 % may be obtained. (EHS)

  7. Audio Logo Recognition, Reduced Articulation and Coding Orientation

    DEFF Research Database (Denmark)

    Bonde, Anders; Hansen, Allan Grutt

    2013-01-01

    In this paper we explore an interdisciplinary theoretical framework for the analysis of corporate audio logos and their effectiveness regarding recognisability and identification. This is done by combining three different academic disciplines: 1) social semiotics, 2) branding theory and 3) music...... on musicological descriptors. We consider as a starting point Kress and Van Leeuwen’s (1996, 2006) conceptualisation of ‘modality’, which is central to their ‘visual grammar’ theory and subsequently extended to auditory expressions such as spoken language, music and sound effects (Van Leeuwen, 1999). While...... connected to notions of brand recognisability and brand identification, thus resulting in the concept of ‘Reduced Articulation Form’ (RAF). The concept has been tested empirically through a survey of 137 upper secondary school students. On the basis of a conditioning experiment, manipulating five existing...

  8. Audio collection in the SASA Institute of Musicology

    Directory of Open Access Journals (Sweden)

    Lajić-Mihajlović Danka

    2010-01-01

    Full Text Available The paper is relating to audio collection of the Institute of Musicology SASA as extremely important part of this institution’s fund. The collection comprises of valuable sound materials, especially significant collections of fieldwork recordings of traditional folk and church music, as also recordings of pieces of the 19th and 20th century Serbian composers. Information on sound carriers, methodologies and circumstances in which the recordings have been made, their preservation and further treatment with modern technologies, are a part of ethnomusicological and musicological histories in Serbia. According to number of sound recordings, diachronical dimensions that encompass, geographical areas and genre diversity, this collection is one of the most important sound collections of scientific profile in Serbia.

  9. A Novel Audio Cryptosystem Using Chaotic Maps and DNA Encoding

    Directory of Open Access Journals (Sweden)

    S. J. Sheela

    2017-01-01

    Full Text Available Chaotic maps have good potential in security applications due to their inherent characteristics relevant to cryptography. This paper introduces a new audio cryptosystem based on chaotic maps, hybrid chaotic shift transform (HCST, and deoxyribonucleic acid (DNA encoding rules. The scheme uses chaotic maps such as two-dimensional modified Henon map (2D-MHM and standard map. The 2D-MHM which has sophisticated chaotic behavior for an extensive range of control parameters is used to perform HCST. DNA encoding technology is used as an auxiliary tool which enhances the security of the cryptosystem. The performance of the algorithm is evaluated for various speech signals using different encryption/decryption quality metrics. The simulation and comparison results show that the algorithm can achieve good encryption results and is able to resist several cryptographic attacks. The various types of analysis revealed that the algorithm is suitable for narrow band radio communication and real-time speech encryption applications.

  10. Music information retrieval in compressed audio files: a survey

    Science.gov (United States)

    Zampoglou, Markos; Malamos, Athanasios G.

    2014-07-01

    In this paper, we present an organized survey of the existing literature on music information retrieval systems in which descriptor features are extracted directly from the compressed audio files, without prior decompression to pulse-code modulation format. Avoiding the decompression step and utilizing the readily available compressed-domain information can significantly lighten the computational cost of a music information retrieval system, allowing application to large-scale music databases. We identify a number of systems relying on compressed-domain information and form a systematic classification of the features they extract, the retrieval tasks they tackle and the degree in which they achieve an actual increase in the overall speed-as well as any resulting loss in accuracy. Finally, we discuss recent developments in the field, and the potential research directions they open toward ultra-fast, scalable systems.

  11. Real Time Recognition Of Speakers From Internet Audio Stream

    Directory of Open Access Journals (Sweden)

    Weychan Radoslaw

    2015-09-01

    Full Text Available In this paper we present an automatic speaker recognition technique with the use of the Internet radio lossy (encoded speech signal streams. We show an influence of the audio encoder (e.g., bitrate on the speaker model quality. The model of each speaker was calculated with the use of the Gaussian mixture model (GMM approach. Both the speaker recognition and the further analysis were realized with the use of short utterances to facilitate real time processing. The neighborhoods of the speaker models were analyzed with the use of the ISOMAP algorithm. The experiments were based on four 1-hour public debates with 7–8 speakers (including the moderator, acquired from the Polish radio Internet services. The presented software was developed with the MATLAB environment.

  12. Feature Selection for Audio Surveillance in Urban Environment

    Directory of Open Access Journals (Sweden)

    KIKTOVA Eva

    2014-05-01

    Full Text Available This paper presents the work leading to the acoustic event detection system, which is designed to recognize two types of acoustic events (shot and breaking glass in urban environment. For this purpose, a huge front-end processing was performed for the effective parametric representation of an input sound. MFCC features and features computed during their extraction (MELSPEC and FBANK, then MPEG-7 audio descriptors and other temporal and spectral characteristics were extracted. High dimensional feature sets were created and in the next phase reduced by the mutual information based selection algorithms. Hidden Markov Model based classifier was applied and evaluated by the Viterbi decoding algorithm. Thus very effective feature sets were identified and also the less important features were found.

  13. Deep learning, audio adversaries, and music content analysis

    DEFF Research Database (Denmark)

    Kereliuk, Corey Mose; Sturm, Bob L.; Larsen, Jan

    2015-01-01

    We present the concept of adversarial audio in the context of deep neural networks (DNNs) for music content analysis. An adversary is an algorithm that makes minor perturbations to an input that cause major repercussions to the system response. In particular, we design an adversary for a DNN...... that takes as input short-time spectral magnitudes of recorded music and outputs a high-level music descriptor. We demonstrate how this adversary can make the DNN behave in any way with only extremely minor changes to the music recording signal. We show that the adversary cannot be neutralised by a simple...... filtering of the input. Finally, we discuss adversaries in the broader context of the evaluation of music content analysis systems....

  14. Self-oscillating modulators for direct energy conversion audio power amplifiers

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.

    2005-01-01

    Direct energy conversion audio power amplifier represents total integration of switching-mode power supply and Class D audio power amplifier into one compact stage, achieving high efficiency, high level of integration, low component count and eventually low cost. This paper presents how self-oscillating...

  15. Approaches to building single-stage AC/AC conversion switch-mode audio power amplifiers

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.

    2004-01-01

    This paper discusses the possible topologies and promising approaches towards direct single-phase AC-AC conversion of the mains voltage for audio applications. When compared to standard Class-D switching audio power amplifiers with a separate power supply, it is expected that direct conversion...

  16. Effects of Audio-Visual Information on the Intelligibility of Alaryngeal Speech

    Science.gov (United States)

    Evitts, Paul M.; Portugal, Lindsay; Van Dine, Ami; Holler, Aline

    2010-01-01

    Background: There is minimal research on the contribution of visual information on speech intelligibility for individuals with a laryngectomy (IWL). Aims: The purpose of this project was to determine the effects of mode of presentation (audio-only, audio-visual) on alaryngeal speech intelligibility. Method: Twenty-three naive listeners were…

  17. Audio Control Handbook For Radio and Television Broadcasting. Third Revised Edition.

    Science.gov (United States)

    Oringel, Robert S.

    Audio control is the operation of all the types of sound equipment found in the studios and control rooms of a radio or television station. Written in a nontechnical style for beginners, the book explains thoroughly the operation of all types of audio equipment. Diagrams and photographs of commercial consoles, microphones, turntables, and tape…

  18. A Perceptual Model for Sinusoidal Audio Coding Based on Spectral Integration

    NARCIS (Netherlands)

    Van de Par, S.; Kohlrausch, A.; Heusdens, R.; Jensen, J.; Holdt Jensen, S.

    2005-01-01

    Psychoacoustical models have been used extensively within audio coding applications over the past decades. Recently, parametric coding techniques have been applied to general audio and this has created the need for a psychoacoustical model that is specifically suited for sinusoidal modelling of

  19. A perceptual model for sinusoidal audio coding based on spectral integration

    NARCIS (Netherlands)

    Van de Par, S.; Kohlrauch, A.; Heusdens, R.; Jensen, J.; Jensen, S.H.

    2005-01-01

    Psychoacoustical models have been used extensively within audio coding applications over the past decades. Recently, parametric coding techniques have been applied to general audio and this has created the need for a psychoacoustical model that is specifically suited for sinusoidal modelling of

  20. Changes of the Prefrontal EEG (Electroencephalogram) Activities According to the Repetition of Audio-Visual Learning.

    Science.gov (United States)

    Kim, Yong-Jin; Chang, Nam-Kee

    2001-01-01

    Investigates the changes of neuronal response according to a four time repetition of audio-visual learning. Obtains EEG data from the prefrontal (Fp1, Fp2) lobe from 20 subjects at the 8th grade level. Concludes that the habituation of neuronal response shows up in repetitive audio-visual learning and brain hemisphericity can be changed by…