Emergency planning for industrial hazards

International Nuclear Information System (INIS)

Gow, H.B.F.; Kay, R.W.

1988-01-01

The European Communities have produced a Directive on the Major Accident Hazards of Certain Industrial Activities which sets out standards for the control and mitigation of the hazards presented by sites and storages which contain significant quantities of dangerous substances. An essential element of these controls is the provision of effective on-and off-site emergency plans. This conference explores the considerable research effort which is going on throughout the world in the improvement of systems for emergency planning. Attention was also drawn to areas where difficulties still exist, for example in predicting the consequences of an accident, the complexities of communication problems and the difficulties arising from involvement of the public. The proceedings are in six parts which deal with organizations implementing emergency planning: on- and off-site emergency planning and design; techniques for emergency plans; expenses and auditing of emergency plans; lessons learnt from the emergency management of major accidents; information to the public to and during emergencies. (author)

48 CFR 5152.208-9001 - Industrial preparedness planning.

Science.gov (United States)

2010-10-01

... planning. 5152.208-9001 Section 5152.208-9001 Federal Acquisition Regulations System DEPARTMENT OF THE ARMY... planning. As prescribed at 5108-070(g)(4) insert the following clause in full text in contracts where the contractor is designated a Limited Fee Planned Producer. Industrial Preparedness Planning (XXX 1989) (DEV) (a...

Success Skills for the Textile Industry: Problem Solving (SS3). Workforce 2000 Partnership.

Science.gov (United States)

Enterprise State Junior Coll., AL.

This curriculum package on problem solving is a product of the Workforce 2000 Partnership, which combined the resources of four educational partners and four industrial partners in Alabama, Georgia, and South Carolina to provide education and training in communication, computation, and critical thinking to employees in the apparel, carpet, and…

Strategic marketing planning and the Nigerian banking industry ...

African Journals Online (AJOL)

Strategic marketing planning and the Nigerian banking industry. ... However, banks often have problem of formulating good marketing strategy plan that will enhance the bank general performance. ... EMAIL FULL TEXT EMAIL FULL TEXT

Application of GIS Technology for Town Planning Tasks Solving

Science.gov (United States)

Kiyashko, G. A.

2017-11-01

For developing territories, one of the most actual town-planning tasks is to find out the suitable sites for building projects. The geographic information system (GIS) allows one to model complex spatial processes and can provide necessary effective tools to solve these tasks. We propose several GIS analysis models which can define suitable settlement allocations and select appropriate parcels for construction objects. We implement our models in the ArcGIS Desktop package and verify by application to the existing objects in Primorsky Region (Primorye Territory). These suitability models use several variations of the analysis method combinations and include various ways to resolve the suitability task using vector data and a raster data set. The suitability models created in this study can be combined, and one model can be integrated into another as its part. Our models can be updated by other suitability models for further detailed planning.

Integrating strategic environmental assessment with industry planning: a case study of the Pasquai-Porcupine forest management plan, Saskatchewan, Canada.

Science.gov (United States)

Noble, Bram F

2004-03-01

Strategic environmental assessment (SEA) is gaining widespread recognition as a tool for integrating environmental considerations in policy, plan, and program development and decision-making. Notwithstanding the potential of SEA to improve higher-order decision processes, there has been very little attention given to integrating SEA with industry planning practices. As a result, the benefits of SEA have yet to be fully realized among industrial proponents. That said, SEA practice is ongoing, albeit informally and often under a different label, and is proving to be a valuable tool for industry planning and decision-making. Based on a case study of the Pasquai-Porcupine forest management plan in Saskatchewan, Canada, this paper illustrates how an integrated approach to SEA can contribute to industry environmental decision-making and can enhance the quality and deliverability of industry plans.

Demand planning approaches employed by clothing industry stakeholders in Gauteng, South Africa

Directory of Open Access Journals (Sweden)

Ntombizodwa J. Matsoma

2017-10-01

Full Text Available Background: The decline in the productivity of the South African clothing industry was attributed to changing trends in the number of clothing production organisations, which together with a decline in manufacturing output and a fluctuation in employment had all contributed to complexities in demand planning. Purpose: This article investigates demand planning approaches in the clothing industry in Gauteng. Method: A descriptive study was conducted based on a structured questionnaire. Findings: The results revealed that both hierarchical and optimal approaches should be considered in clothing manufacturing. Managerial implications: In order to improve demand planning practices in the clothing industry, managers are recommended to apply hierarchical and optimal demand planning approaches, which might bring about improvements to demand planning in the Gauteng clothing industry. Conclusion: It is recommended that clothing manufacturers consider the types of product offering before making decisions about adopting the hierarchical or optimal demand planning approaches. When planning for basic clothes, manufacturers should consider a hierarchical demand planning approach, whereas the optimal demand planning approach is recommended for fashion clothes.

Decomposition of the Strategic Plan for Restructuring a Machine-Building Enterprise in View of Continuity of the Plans for Adjacent Periods

Directory of Open Access Journals (Sweden)

Kozyr-Chepurna Mariia A.

2017-09-01

Full Text Available The aim of the article is to practically approve the authors’ multi-level hierarchical approach to the strategic planning of industrial enterprise restructuring using the example of solving the problem of disaggregating the strategic plan for restructuring a machine-building enterprise of the electrical industry providing for organization of production of railroad freight cars at the enterprise. Besides, there demonstrated the effectiveness of the mechanisms of coordinating the plans for adjacent hierarchical and time periods included in the corresponding mathematical support. In the course of the practical approval, different variants of formulating the problem of decomposing the strategic plan into plans of lower hierarchical levels differing in terms of coordination of the plans of adjacent hierarchical levels and adjacent planning periods are considered, and the solutions of corresponding optimal planning problems are analyzed. It is shown that the developed methodological approach, which is based on the methods of statistical optimization, demonstrates quite satisfactory performance characteristics in solving the problem of coordinating the plans of adjacent time periods in the mode of sliding planning in the process of decomposition of the strategic plan into lower-level plans.

Joint industry planning platforms for coal export supply chains

Energy Technology Data Exchange (ETDEWEB)

Bridges, R.; Buckley, N.; Goodall, J.; Seeley, D. [InterDynamics Pty. Ltd. (Australia)

1998-12-31

Improving the performance and reducing the costs associated with export logistics chain is critical to the competitiveness of export coal mines. The fundamental practices associated with the use of export logistics chains made up of mine, trucking, rail and port operations are being challenged by the advent of third party operators on rail systems and the use of the Internet. Whilst individual mines can improve their processes to drive down their mining costs, they face major challenges in their endeavour to improve the performance of export logistics chains and reduce the significant logistics costs of moving coal from the mine to export ships, via the shared infrastructure of rail systems and ports. There is an increasing realisation that global competition is not only between mines but between coal export regions that are defined by their rail system and ports infrastructure. The development and use of a joint industry planning platform for the export logistics chains of the Western Australian Grain Industry has demonstrated that an industry facing significant restructuring and increased competitiveness can achieve major throughput and cost reduction gains when stakeholders in export logistics chains share key planning information using the Internet and state of the art planning tools. Joint industry planning platforms for export logistics chains are being considered or are at initial stages of development for a number of Australasian coal export logistics chains. This paper addresses the key components of joint industry planning platforms, the key information that should be shared, the use of the internet and information servers, and the contractual structures required to enable stakeholders of an export logistics chain, who are competitors or potential competitors, to work together to improve the competitiveness of a coal export region. 4 refs., 6 figs.

INDUSTRIAL ENTERPRISE TAX PLANNING AS PART OF EXPENSE OPTIMIZATION STRATEGY

Directory of Open Access Journals (Sweden)

A. P. Garnov

2012-01-01

Full Text Available Tax liability planning is vital for industrial enterprises to reduce their tax burden and thus reduce expenses of the organization for a certain period. Industrial enterprises are among main taxpayers in the Russian Federation, and recommendations given in the article on topical issues relatedto planning of tax obligations will help top managers of the enterprises to avoid unnecessary financial losses and to ensure further growth and development of their organizations. Attention is focused on specifics of the industrial enterprises’ activities under present conditions due to thenature and particular features of their operation.

An Interactive Strategy for Solving Multi-Criteria Decision Making of Sustainable Land Revitalization Planning Problem

Science.gov (United States)

Mayasari, Ruth; Mawengkang, Herman; Gomar Purba, Ronal

2018-02-01

Land revitalization refers to comprehensive renovation of farmland, waterways, roads, forest or villages to improve the quality of plantation, raise the productivity of the plantation area and improve agricultural production conditions and the environment. The objective of sustainable land revitalization planning is to facilitate environmentally, socially, and economically viable land use. Therefore it is reasonable to use participatory approach to fullfil the plan. This paper addresses a multicriteria decision aid to model such planning problem, then we develop an interactive approach for solving the problem.

Investments Portfolio Optimal Planning for industrial assets management: Method and Tool

International Nuclear Information System (INIS)

Lonchampt, Jerome; Fessart, Karine

2012-01-01

The purpose of this paper is to describe the method and tool dedicated to optimize investments planning for industrial assets. These investments may either be preventive maintenance tasks, asset enhancement or logistic investment such as spare parts purchase. The three methodological points to investigate in such an issue are: 1. The measure of the profitability of a portfolio of investments 2. The selection and planning of an optimal set of investments 3. The measure of the risk of a portfolio of investments The measure of the profitability of a set of investments in the IPOP (registered) tool is synthesised in the Net Present Value indicator. The NPV is the sum of the differences of discounted cash flows (direct costs, forced outages...) between the situations with and without a given investment. These cash flows are calculated through a pseudo-markov reliability model representing independently the components of the industrial asset and the spare parts inventories. The component model has been widely discussed over the years but the spare part model is a new one based on some approximations that will be discussed. This model, referred as the NPV function, takes for input an investments portfolio and gives its NPV. The second issue is to optimize the NPV. If all investments were independent, this optimization would be an easy calculation, unfortunately there are two sources of dependency. The first one is introduced by the spare part model, as if components are indeed independent in their reliability model, the fact that several components use the same inventory induces a dependency. The second dependency comes from economic, technical or logistic constraints, such as a global maintenance budget limit or a precedence constraint between two investments, making the aggregation of individual optimum not necessary feasible. The algorithm used to solve such a difficult optimization problem is a genetic algorithm. After a description of the features of the software a

The Assessment of 21st Century Skills in Industrial and Organizational Psychology: Complex and Collaborative Problem Solving

OpenAIRE

Neubert, Jonas; Mainert, Jakob; Kretzschmar, André; Greiff, Samuel

2015-01-01

In the current paper, we highlight why and how industrial and organizational psychology can take advantage of research on 21st century skills and their assessment. We present vital theoretical perspectives, a suitable framework for assessment, and exemplary instruments with a focus on advances in the assessment of Human Capital. Specifically, Complex Problem Solving (CPS) and Collaborative Problem Solving (ColPS) are two transversal skills (i.e., skills that span multiple domains) that are...

An Environmental Sector Plan for the nuclear industry in England and Wales

International Nuclear Information System (INIS)

Bennett, D.; Fawcett, P.; Hunt, C.; Long, J.

2004-01-01

The Environment Agency is the principal environmental regulator in England and Wales. As part of its longer term strategic planning, it is developing 'Sector Plans' for the major industry sectors it regulates. The intent of Sector Plans is to promote improvement of the Industry's performance in order to deliver environmental benefit. One of the pilot Sector Plans developed has been for the nuclear sector. The Nuclear Sector Plan has been produced jointly with the nuclear industry as a rolling framework of agreed national environmental objectives and priorities. Operators of nuclear sites have agreed to use this framework as a basis in England and Wales for setting environmental performance targets, monitoring performance against the targets and publicly reporting on their performance. The paper describes the development of the Sector Plan, its content and further development. (Author) 3 refs

INDUSTRIAL ENTERPRISE TAX PLANNING AS PART OF EXPENSE OPTIMIZATION STRATEGY

Directory of Open Access Journals (Sweden)

A. P. Garnov

2012-01-01

Full Text Available Tax liability planning is vital for industrial enterprises to reduce their tax burden and thus reduce expenses of the organization for a certain period. Industrial enterprises are among main taxpayers in the Russian Federation, and recommendations given in the article on topical issues related to planning of tax obligations will help top managers of the enterprises to avoid unnecessary financial losses and to ensure further growth and development of their organizations. Attention is focused on specifics of the industrial enterprises’ activities under present conditions due to the nature and particular features of their operation.

Integrated Instrumentation and Control Upgrade Plan

International Nuclear Information System (INIS)

Wilkinson, D.; Sun, B.; Wray, L.; Smith, J.

1992-02-01

This document presents the first industry-wide integrated research and development plan to support upgrading instrumentation and control (I ampersand C) systems in nuclear power plants in the United States. The plan encompasses both solving obsolescence problems and introducing modern I ampersand C technology into the industry. Accomplishing this plan will provide the technological base to modernize existing plants, as well as bridge the gap to meet Advanced Light Water Reactor (ALWR) requirements for modern I ampersand C systems. This plan defines Research and Development tasks to meet the identified needs for the following technical elements: Instrumentation, Control and Protection, Man-Machine Support Systems, Maintenance, Communications, Verification and Validation, and Specifications and Standards

Cumulative effects of planned industrial development and climate change on marine ecosystems

Directory of Open Access Journals (Sweden)

Cathryn Clarke Murray

2015-07-01

Full Text Available With increasing human population, large scale climate changes, and the interaction of multiple stressors, understanding cumulative effects on marine ecosystems is increasingly important. Two major drivers of change in coastal and marine ecosystems are industrial developments with acute impacts on local ecosystems, and global climate change stressors with widespread impacts. We conducted a cumulative effects mapping analysis of the marine waters of British Columbia, Canada, under different scenarios: climate change and planned developments. At the coast-wide scale, climate change drove the largest change in cumulative effects with both widespread impacts and high vulnerability scores. Where the impacts of planned developments occur, planned industrial and pipeline activities had high cumulative effects, but the footprint of these effects was comparatively localized. Nearshore habitats were at greatest risk from planned industrial and pipeline activities; in particular, the impacts of planned pipelines on rocky intertidal habitats were predicted to cause the highest change in cumulative effects. This method of incorporating planned industrial development in cumulative effects mapping allows explicit comparison of different scenarios with the potential to be used in environmental impact assessments at various scales. Its use allows resource managers to consider cumulative effect hotspots when making decisions regarding industrial developments and avoid unacceptable cumulative effects. Management needs to consider both global and local stressors in managing marine ecosystems for the protection of biodiversity and the provisioning of ecosystem services.

Personal Study Planning in Doctoral Education in Industrial Engineering

Science.gov (United States)

Lahenius, K.; Martinsuo, M.

2010-01-01

The duration of doctoral studies has increased in Europe. Personal study planning has been considered as one possible solution to help students in achieving shorter study times. This study investigates how doctoral students experience and use personal study plans in one university department of industrial engineering. The research material…

Applying ant colony optimization metaheuristic to solve forest transportation planning problems with side constraints

Science.gov (United States)

Marco A. Contreras; Woodam Chung; Greg Jones

2008-01-01

Forest transportation planning problems (FTPP) have evolved from considering only the financial aspects of timber management to more holistic problems that also consider the environmental impacts of roads. These additional requirements have introduced side constraints, making FTPP larger and more complex. Mixed-integer programming (MIP) has been used to solve FTPP, but...

Selection and Penalty Strategies for Genetic Algorithms Designed to Solve Spatial Forest Planning Problems

International Nuclear Information System (INIS)

Thompson, M.P.; Sessions, J.; Hamann, J.D.

2009-01-01

Genetic algorithms (GAs) have demonstrated success in solving spatial forest planning problems. We present an adaptive GA that incorporates population-level statistics to dynamically update penalty functions, a process analogous to strategic oscillation from the tabu search literature. We also explore performance of various selection strategies. The GA identified feasible solutions within 96%, 98%, and 93% of a non spatial relaxed upper bound calculated for landscapes of 100, 500, and 1000 units, respectively. The problem solved includes forest structure constraints limiting harvest opening sizes and requiring minimally sized patches of mature forest. Results suggest that the dynamic penalty strategy is superior to the more standard static penalty implementation. Results also suggest that tournament selection can be superior to the more standard implementation of proportional selection for smaller problems, but becomes susceptible to premature convergence as problem size increases. It is therefore important to balance selection pressure with appropriate disruption. We conclude that integrating intelligent search strategies into the context of genetic algorithms can yield improvements and should be investigated for future use in spatial planning with ecological goals.

Digital Story-Based Problem Solving Applications: Preservice Primary Teachers' Experiences and Future Integration Plans

Science.gov (United States)

Kilic, Çigdem; Sancar-Tokmak, Hatice

2017-01-01

This case study investigates how preservice primary school teachers describe their experiences with digital story-based problem solving applications and their plans for the future integration of this technology into their teaching. Totally 113 preservice primary school teachers participated in the study. Data collection tools included a…

Applying radiological emergency planning experience to hazardous materials emergency planning within the nuclear industry

International Nuclear Information System (INIS)

Foltman, A.; Newsom, D.; Lerner, K.

1988-01-01

The nuclear industry has extensive radiological emergency planning (REP) experience that is directly applicable to hazardous materials emergency planning. Recently, the Feed Materials Production Center near Cincinnati, Ohio, successfully demonstrated such application. The REP experience includes conceptual bases and standards for developing plans that have been tested in hundreds of full-scale exercises. The exercise program itself is also well developed. Systematic consideration of the differences between chemical and radiological hazards shows that relatively minor changes to the REP bases and standards are necessary. Conduct of full-scale, REP-type exercises serves to test the plans, provide training, and engender confidence and credibility

Two efficient heuristics to solve the integrated load distribution and production planning problem

International Nuclear Information System (INIS)

Gajpal, Yuvraj; Nourelfath, Mustapha

2015-01-01

This paper considers a multi-period production system where a set of machines are arranged in parallel. The machines are unreliable and the failure rate of machine depends on the load assigned to the machine. The expected production rate of the system is considered to be a non-monotonic function of its load. Because of the machine failure rate, the total production output depends on the combination of loads assigned to different machines. We consider the integration of load distribution decisions with production planning decision. The product demands are considered to be known in advance. The objective is to minimize the sum of holding costs, backorder costs, production costs, setup costs, capacity change costs and unused capacity costs while satisfying the demand over specified time horizon. The constraint is not to exceed available repair resources required to repair the machine breakdown. The paper develops two heuristics to solve the integrated load distribution and production planning problem. The first heuristic consists of a three-phase approach, while the second one is based on tabu search metaheuristic. The efficiency of the proposed heuristics is tested through the randomly generated problem instances. - Highlights: • The expected performance of the system is a non-monotonic function of its load. • We consider the integration of load distribution and production planning decisions. • The paper proposes three phase and tabu search based heuristics to solve the problem. • Lower bound has been developed for checking the effectiveness of the heuristics. • The efficiency of the heuristic is tested through randomly generated instances.

Environmental Control Plan for the Industrial Hygiene Field Services Facility

International Nuclear Information System (INIS)

Donnelly, J.W.

2000-01-01

This environmental control plan is for the Hanford Site's Industrial Hygiene Field Services Facility, located in the 100-N Area. This facility is used for the maintenance and storage of respirators, respiratory equipment and testing, calibration and testing of industrial hygiene equipment, and asbestos fiber counting

Eco-Industrial Parks and Sustainable Spatial Planning: A Possible Contradiction?

Directory of Open Access Journals (Sweden)

Elisa Conticelli and Simona Tondelli

2014-08-01

Full Text Available The definition and the subsequent development of eco-industrial parks (EIPs have been deeply based on the application of industrial ecology theory, which pays specific attention to metabolic exchanges within industrial processes to address a deep reduction of limited resource consumption and a minimization of waste production in the framework of a sustainable development approach. Despite the EIPs configurations being essentially based on the overall idea of sustainability, the problem of defining their proper location inside the territory and the consequent land use model, to minimize land consumption, have not always been central in the wide range of studies and practices concerning the EIPs. Nevertheless, the specific problem of a drastic reduction of land consumption at the EIP planning stage acquires a crucial role and, therefore, needs to be carefully assessed inside the perspective of sustainable urban development. In this framework, the paper firstly aims at facing the nontrivial relationship between the EIPs’ theorizations and implementations and the reduction of land consumption by referencing specific studies and shared tools, where new developments have been favored despite the conversion and redevelopment of existing industrial parks; secondly, it focus on an Italian case study and its emblematic EIP planning processes, in order to deepen the contradictions between sustainable spatial planning and eco-industrial parks. Finally, some final conclusions will be presented, in order to integrate some main issues concerning the reduction of land consumption inside the more traditional EIP design processes.

Collaborating with Industry to Enhance Financial Planning and Accounting Education

Directory of Open Access Journals (Sweden)

Mark Brimble

2012-11-01

Full Text Available Higher education is integral to the professionalisation of financial planning in Australia. However, thetraditional separation between ‘content’ and ‘practice’ in tertiary curriculum does not necessarily equipstudents with the skills required to apply the content in a professional context. Contextualisation of thefinancial planning curriculum requires collaboration between higher education institutions and the professionto develop authentic learning environments, such as work-integrated learning (WIL. This paper describes thecollaboration by one Australian university to develop a professionally integrated Financial Planning andAccounting degree and provides evidence of its impact from an industry perspective. The results reveal a highlevel of industry satisfaction with the degree, substantial professional integration, as well as the developmentof students’ professional skills. Students also developed an improved impression of the university, its studentsand its staff.

Act first, think later: the presence and absence of inferential planning in problem solving.

Science.gov (United States)

Ormerod, Thomas C; Macgregor, James N; Chronicle, Edward P; Dewald, Andrew D; Chu, Yun

2013-10-01

Planning is fundamental to successful problem solving, yet individuals sometimes fail to plan even one step ahead when it lies within their competence to do so. In this article, we report two experiments in which we explored variants of a ball-weighing puzzle, a problem that has only two steps, yet nonetheless yields performance consistent with a failure to plan. The results fit a computational model in which a solver's attempts are determined by two heuristics: maximization of the apparent progress made toward the problem goal and minimization of the problem space in which attempts are sought. The effectiveness of these heuristics was determined by lookahead, defined operationally as the number of steps evaluated in a planned move. Where move outcomes cannot be visualized but must be inferred, planning is constrained to the point where some individuals apply zero lookahead, which with n-ball problems yields seemingly irrational unequal weighs. Applying general-purpose heuristics with or without lookahead accounts for a range of rational and irrational phenomena found with insight and noninsight problems.

Production planning and scheduling in refinery industry

International Nuclear Information System (INIS)

Persson, Jan.

1999-01-01

In this thesis we consider production planning and scheduling in refinery industry, in particular we study the planning and scheduling at the Nynaes AB refinery and at the Scanraff AB refinery. The purpose is to contribute to the development and the use of optimization models to support efficient decision making. We identify various decision problems concerning the aggregated production planning, the shipment planning, the scheduling of operation modes, and the utilization of pipes and tanks; and we discuss the potential to successfully apply optimization models on these problems. We formulate a mixed integer linear programming model for the scheduling of operation modes at Nynaes. The model concerns decisions about which mode of operation to use at a particular point in time in order to minimize costs of changing modes and costs of keeping inventories, given demands for products. We derive several types of valid inequalities for this mathematical problem and show how these inequalities can improve the lower bound obtained from the linear programming relaxation of the problem. We also show how the valid inequalities can be used to improve the performance of a branch and bound solution approach. Further, a tabu search heuristic is developed for the scheduling problem. The solution methods are tested on data provided by the Nynaes refinery, and the performance of the methods are discussed. We present several extensions of the proposed model, and illustrate how the model can be used to support both operational and strategic decision making at the refinery. 66 refs, 6 figs, 32 tabs. Also published as: Dissertation from the International Graduate School of Management and Industrial Engineering, No 25, Licenciate Thesis

Production planning and scheduling in refinery industry

Energy Technology Data Exchange (ETDEWEB)

Persson, Jan

1999-07-01

In this thesis we consider production planning and scheduling in refinery industry, in particular we study the planning and scheduling at the Nynaes AB refinery and at the Scanraff AB refinery. The purpose is to contribute to the development and the use of optimization models to support efficient decision making. We identify various decision problems concerning the aggregated production planning, the shipment planning, the scheduling of operation modes, and the utilization of pipes and tanks; and we discuss the potential to successfully apply optimization models on these problems. We formulate a mixed integer linear programming model for the scheduling of operation modes at Nynaes. The model concerns decisions about which mode of operation to use at a particular point in time in order to minimize costs of changing modes and costs of keeping inventories, given demands for products. We derive several types of valid inequalities for this mathematical problem and show how these inequalities can improve the lower bound obtained from the linear programming relaxation of the problem. We also show how the valid inequalities can be used to improve the performance of a branch and bound solution approach. Further, a tabu search heuristic is developed for the scheduling problem. The solution methods are tested on data provided by the Nynaes refinery, and the performance of the methods are discussed. We present several extensions of the proposed model, and illustrate how the model can be used to support both operational and strategic decision making at the refinery. 66 refs, 6 figs, 32 tabs. Also published as: Dissertation from the International Graduate School of Management and Industrial Engineering, No 25, Licenciate Thesis.

Production planning and scheduling in refinery industry

Energy Technology Data Exchange (ETDEWEB)

Persson, Jan

1999-06-01

In this thesis we consider production planning and scheduling in refinery industry, in particular we study the planning and scheduling at the Nynaes AB refinery and at the Scanraff AB refinery. The purpose is to contribute to the development and the use of optimization models to support efficient decision making. We identify various decision problems concerning the aggregated production planning, the shipment planning, the scheduling of operation modes, and the utilization of pipes and tanks; and we discuss the potential to successfully apply optimization models on these problems. We formulate a mixed integer linear programming model for the scheduling of operation modes at Nynaes. The model concerns decisions about which mode of operation to use at a particular point in time in order to minimize costs of changing modes and costs of keeping inventories, given demands for products. We derive several types of valid inequalities for this mathematical problem and show how these inequalities can improve the lower bound obtained from the linear programming relaxation of the problem. We also show how the valid inequalities can be used to improve the performance of a branch and bound solution approach. Further, a tabu search heuristic is developed for the scheduling problem. The solution methods are tested on data provided by the Nynaes refinery, and the performance of the methods are discussed. We present several extensions of the proposed model, and illustrate how the model can be used to support both operational and strategic decision making at the refinery. 66 refs, 6 figs, 32 tabs. Also published as: Dissertation from the International Graduate School of Management and Industrial Engineering, No 25, Licenciate Thesis

An undertaking planning game for the electricity supply industry

International Nuclear Information System (INIS)

Troescher, H.

1977-01-01

Planning games have been found satisfactory in many field in political and economic life. In particular the more convenient access to electronic calculators has made a contrinution to their wider use. It is therefore surprising that the first planning game which has become known for the electricity supply industry was first published in the year 1975. This is the planning game for the Bernischen Kraftwerke AG, which is based on a simplified model of a small electricity supply undertaking (EVU). This planning game was adapted in the RWE to the conditions in larger EVU and a few additional model components were added. Besides the general points of view on planning games for EVU the author deals with the extended planning game which is termed in the article PEW. (orig.) [de

Demand planning approaches employed by clothing industry stakeholders in Gauteng, South Africa

OpenAIRE

Ntombizodwa J. Matsoma; Intaher M. Ambe

2017-01-01

Background: The decline in the productivity of the South African clothing industry was attributed to changing trends in the number of clothing production organisations, which together with a decline in manufacturing output and a fluctuation in employment had all contributed to complexities in demand planning. Purpose: This article investigates demand planning approaches in the clothing industry in Gauteng. Method: A descriptive study was conducted based on a structured questionnaire. ...

Decision support in hierarchical planning systems: The case of procurement planning in oil refining industries

DEFF Research Database (Denmark)

Kallestrup, Kasper Bislev; Lynge, Lasse Hadberg; Akkerman, Renzo

2014-01-01

In this paper, we discuss the development of decision support systems for hierarchically structured planning approaches, such as commercially available advanced planning systems. We develop a framework to show how such a decision support system can be designed with the existing organization in mind...... and from the perspective of the organizational aspects involved. To exemplify and develop our framework, we use a case study of crude oil procurement planning in the refining industry. The results of the case study indicate an improved organizational embedding of the DSS, leading to significant savings...... in terms of planning efforts and procurement costs. In general, our framework aims to support the continuous improvement of advanced planning systems, increasing planning quality in complex supply chain settings....

A production model and maintenance planning model for the process industry

NARCIS (Netherlands)

Ashayeri, J.; Teelen, A.; Selen, W.J.

1995-01-01

In this paper a model is developed to simultaneously plan preventive maintenance and production in a process industry environment, where maintenance planning is extremely important. The model schedules production jobs and preventive maintenance jobs, while minimizing costs associated with

Defense Industrial Base: Critical Infrastructure and Key Resources Sector-Specific Plan as Input to the National Infrastructure Protection Plan

National Research Council Canada - National Science Library

2007-01-01

This Defense Industrial Base (DIB) Sector-Specific Plan (SSP), developed in collaboration with industry and government security partners, provides sector-level critical infrastructure and key resources (CI/KR...

Coordination and Human Resource Planning in the Hawaii Visitor Industry.

Science.gov (United States)

Hawaii State Commission on Manpower and Full Employment, Honolulu.

This report was undertaken in response to a request by the Sixth Legislature, which expressed its concern with the lack of coordination and overall human resource planning in the visitor industry and that the findings of the January 6-7, 1970 Travel Industry Congress had not been fully implemented. The State Commission on Manpower and Full…

Development of a master plan for industrial solid waste management

International Nuclear Information System (INIS)

Karamouz, M.; Zahraie, B.; Kerachian, R.; Mahjouri, N.; Moridi, A.

2006-01-01

Rapid industrial growth in the province of Khuzestan in the south west of Iran has resulted in disposal of about 1750 tons of solid waste per day. Most of these industrial solid wastes including hazardous wastes are disposed without considering environmental issues. This has contributed considerably to the pollution of the environment. This paper introduces a framework in which to develop a master plan for industrial solid waste management. There are usually different criteria for evaluating the existing solid waste pollution loads and how effective the management schemes are. A multiple criteria decision making technique, namely Analytical Hierarchy Process, is used for ranking the industrial units based on their share in solid waste related environmental pollution and determining the share of each unit in total solid waste pollution load. In this framework, a comprehensive set of direct, indirect, and supporting projects are proposed for solid waste pollution control. The proposed framework is applied for industrial solid waste management in the province of Khuzestan in Iran and a databank including GIS based maps of the study area is also developed. The results have shown that the industries located near the capital city of the province, Ahwaz, produce more than 32 percent of the total solid waste pollution load of the province. Application of the methodology also has shown that it can be effectively used for development of the master plan and management of industrial solid wastes

Strengths of the Business Plan and Industrial Collaboration ...

African Journals Online (AJOL)

The study was conducted to identify the strengths of business plan and industrial collaboration strategies in the teaching of entrepreneurship in tertiary institutions. The study was a survey and was conducted using 63 business educators in tertiary institutions in Anambra State, Nigeria. Two research questions and two null ...

The ‘Development Plan of National Strategic Emerging Industries Promotes Breakthrough Development of High-end Equipment and New Material Industry

Institute of Scientific and Technical Information of China (English)

2017-01-01

The State Council recently printed and distributed the Notice on the‘Development Plan of National Strategic Emerging Industries for the'Thirteenth Five Year Plan'’(The Plan),which made overall deployment and arrangement for development target,key tasks,

Self-regulatory speech during planning and problem-solving in children with SLI and their typically developing peers.

Science.gov (United States)

Abdul Aziz, Safiyyah; Fletcher, Janet; Bayliss, Donna M

2017-05-01

Past research with children with specific language impairment (SLI) has shown them to have poorer planning and problem-solving ability, and delayed self-regulatory speech (SRS) relative to their typically developing (TD) peers. However, the studies are few in number and are restricted in terms of the number and age range of participants, which limits our understanding of the nature and extent of any delays. Moreover, no study has examined the performance of a significant subset of children with SLI, those who have hyperactive and inattentive behaviours. This cross-sectional study aimed to compare the performance of young children with SLI (aged 4-7 years) with that of their TD peers on a planning and problem-solving task and to examine the use of SRS while performing the task. Within each language group, the performance of children with and without hyperactive and inattentive behaviours was further examined. Children with SLI (n = 91) and TD children (n = 81), with and without hyperactive and inattentive behaviours across the three earliest school years (Kindergarten, Preprimary and Year 1) were video-taped while they completed the Tower of London (TOL), a planning and problem-solving task. Their recorded speech was coded and analysed to look at differences in SRS and its relation to TOL performance across the groups. Children with SLI scored lower on the TOL than TD children. Additionally, children with hyperactive and inattentive behaviours performed worse than those without hyperactive and inattentive behaviours, but only in the SLI group. This suggests that children with SLI with hyperactive and inattentive behaviours experience a double deficit. Children with SLI produced less inaudible muttering than TD children, and showed no reduction in social speech across the first three years of school. Finally, for children with SLI, a higher percentage performed better on the TOL when they used SRS than when they did not. The results point towards a significant delay

The Study of Strategic Industrial Planning for Using Model SWOT

OpenAIRE

Mohammad Ali Abdolvand; Amin Asadollahi

2012-01-01

Organizations to maintain and achieve optimal growth and development and increase its competitiveness need to be a comprehensive and coherent plan for the mission and goals of the strategic plan. The purpose of this study is providing strategic planning and optimal strategies for using SWOT. The company is investigating the territory south of the oil industry. The questionnaire has been used as a research tool containing the questions is 138. Research data from interviews with managers, exper...

Pemberdayaan Pendidikan Teknik Busana Di Perguruan Tinggi Untuk Pengembangan Industri Garmen Di Pasar Global

OpenAIRE

Fitrihana, Noor

2005-01-01

Indonesian garment industries have been sluggishness. Since economic crisis incoming, Indonesian garment products loose ofthe competitiveness until now. In the last five years, perfonnance oftextile industry got decrease because many domestic probleII\\'l. The problems are skills ofworkforce, out ofdate technology and poor of-fashion product inovation. Facing the global market ifnot good plan anticipate, gannent industries are cannot running growthand become sunset industry. To solve the probl...

Industrial Fuel Gas Demonstration Plant Program. Task III, Demonstration plant safety, industrial hygiene, and major disaster plan (Deliverable No. 35)

Energy Technology Data Exchange (ETDEWEB)

None

1980-03-01

This Health and Safety Plan has been adopted by the IFG Demonstration Plant managed by Memphis Light, Gas and Water at Memphis, Tennessee. The plan encompasses the following areas of concern: Safety Plan Administration, Industrial Health, Industrial Safety, First Aid, Fire Protection (including fire prevention and control), and Control of Safety Related Losses. The primary objective of this plan is to achieve adequate control of all potentially hazardous activities to assure the health and safety of all employees and eliminate lost work time to both the employees and the company. The second objective is to achieve compliance with all Federal, state and local laws, regulations and codes. Some thirty specific safe practice instruction items are included.

Optimization-based decision support systems for planning problems in processing industries

NARCIS (Netherlands)

Claassen, G.D.H.

2014-01-01

Summary

Optimization-based decision support systems for planning problems in processing industries

Nowadays, efficient planning of material flows within and between supply chains is of vital importance and has become one of the most challenging problems for decision support in

Environmental Control Plan for the Industrial Hygiene Field Services Facility; TOPICAL

International Nuclear Information System (INIS)

J. W. Donnelly

2001-01-01

This environmental control plan is for the Hanford Site's industrial hygiene field services facility, located in the 100-N Area. The facility is used for the maintenance and storage of respirators, respiratory equipment and testing, calibration and testing of industrial hygiene equipment, and asbestos fiber counting

Screening of Industrial Development Policies, Plans and Programs of Strategic Environmental Assessment in the Industrial Sector of Iran

OpenAIRE

J. Nouri; B. Maghsoudlou Kamali

2005-01-01

The present investigation deals with the quality of capacity building and institutional strengthening of Strategic Environmental Assessment (SEA) in the industrial sector as well as determining the environmental strategies for industrial sustainable development in Iran. The leading aim of this paper has been to systematize the environmental considerations in industrial development strategies, policies, plans and programs in the highest strategic decision making processes and to ensure environ...

Solving complex maintenance planning optimization problems using stochastic simulation and multi-criteria fuzzy decision making

International Nuclear Information System (INIS)

Tahvili, Sahar; Österberg, Jonas; Silvestrov, Sergei; Biteus, Jonas

2014-01-01

One of the most important factors in the operations of many cooperations today is to maximize profit and one important tool to that effect is the optimization of maintenance activities. Maintenance activities is at the largest level divided into two major areas, corrective maintenance (CM) and preventive maintenance (PM). When optimizing maintenance activities, by a maintenance plan or policy, we seek to find the best activities to perform at each point in time, be it PM or CM. We explore the use of stochastic simulation, genetic algorithms and other tools for solving complex maintenance planning optimization problems in terms of a suggested framework model based on discrete event simulation

Solving complex maintenance planning optimization problems using stochastic simulation and multi-criteria fuzzy decision making

Energy Technology Data Exchange (ETDEWEB)

Tahvili, Sahar [Mälardalen University (Sweden); Österberg, Jonas; Silvestrov, Sergei [Division of Applied Mathematics, Mälardalen University (Sweden); Biteus, Jonas [Scania CV (Sweden)

2014-12-10

One of the most important factors in the operations of many cooperations today is to maximize profit and one important tool to that effect is the optimization of maintenance activities. Maintenance activities is at the largest level divided into two major areas, corrective maintenance (CM) and preventive maintenance (PM). When optimizing maintenance activities, by a maintenance plan or policy, we seek to find the best activities to perform at each point in time, be it PM or CM. We explore the use of stochastic simulation, genetic algorithms and other tools for solving complex maintenance planning optimization problems in terms of a suggested framework model based on discrete event simulation.

IMPROVING THE STRATEGIC PLANNING OF THE DEFENSE-INDUSTRIAL COMPLEX CORPORATIONS OF RUSSIA

Directory of Open Access Journals (Sweden)

Katrina B. Dobrova

2016-01-01

Full Text Available In this paper, we develop proposals to improve the strategic planning of Russian corporations of the defense-industrial complex. The relevance of the study due to the fact that the methodology for the adaptation of the strategic management of the military-industrial enterprises with substantial scientifi c and technical potential, should take into account a number of features, such as the identifi cation of the features of competition in the future; understanding of the prospects and development opportunities in the medium and long term; assessment of resource potential; impact assessment and risk in the implementation of promising strategies. In the more precise understanding of the strategy as a pattern of behavior aimed at achieving these goals, a set of rules for search and opportunities; strategic plan is seen as a series of specifi c steps and actions that are integrated in space and time, which lead to the transformation of the current position to the desired. We consider the practice of corporate transformation strategies of the world defense industry using a system method. To improve the strategic planning of Russian defense industry corporations it is recommended to apply the strategy of adapting the defense industry companies and their diversifi cation with the civilian sectors. The key vectors of the development strategy of the defense-industrial complex of Russian corporations are defi ned: providing an acceptable investment climate in the sphere of military-technical cooperation; neutralization of threats by the activities of DIC TNCs; creation of their own TNK defense industry and others.

Talking about Money Is Taboo: Perceptions of Financial Planning Students and Implications for the Financial Planning Industry

Science.gov (United States)

Alsemgeest, Liezel

2016-01-01

Communication about money is a social, cultural and psychological taboo and yet it is essential in the financial planning industry, as a financial planner cannot be effective if all information is not disclosed. This article examines how financial planning students perceive communication about money, their willingness to talk about it and their…

Modeling and solving a large-scale generation expansion planning problem under uncertainty

Energy Technology Data Exchange (ETDEWEB)

Jin, Shan; Ryan, Sarah M. [Iowa State University, Department of Industrial and Manufacturing Systems Engineering, Ames (United States); Watson, Jean-Paul [Sandia National Laboratories, Discrete Math and Complex Systems Department, Albuquerque (United States); Woodruff, David L. [University of California Davis, Graduate School of Management, Davis (United States)

2011-11-15

We formulate a generation expansion planning problem to determine the type and quantity of power plants to be constructed over each year of an extended planning horizon, considering uncertainty regarding future demand and fuel prices. Our model is expressed as a two-stage stochastic mixed-integer program, which we use to compute solutions independently minimizing the expected cost and the Conditional Value-at-Risk; i.e., the risk of significantly larger-than-expected operational costs. We introduce stochastic process models to capture demand and fuel price uncertainty, which are in turn used to generate trees that accurately represent the uncertainty space. Using a realistic problem instance based on the Midwest US, we explore two fundamental, unexplored issues that arise when solving any stochastic generation expansion model. First, we introduce and discuss the use of an algorithm for computing confidence intervals on obtained solution costs, to account for the fact that a finite sample of scenarios was used to obtain a particular solution. Second, we analyze the nature of solutions obtained under different parameterizations of this method, to assess whether the recommended solutions themselves are invariant to changes in costs. The issues are critical for decision makers who seek truly robust recommendations for generation expansion planning. (orig.)

Adapting Experiential Learning to Develop Problem-Solving Skills in Deaf and Hard-of-Hearing Engineering Students.

Science.gov (United States)

Marshall, Matthew M; Carrano, Andres L; Dannels, Wendy A

2016-10-01

Individuals who are deaf and hard-of-hearing (DHH) are underrepresented in science, technology, engineering, and mathematics (STEM) professions, and this may be due in part to their level of preparation in the development and retention of mathematical and problem-solving skills. An approach was developed that incorporates experiential learning and best practices of STEM instruction to give first-year DHH students enrolled in a postsecondary STEM program the opportunity to develop problem-solving skills in real-world scenarios. Using an industrial engineering laboratory that provides manufacturing and warehousing environments, students were immersed in real-world scenarios in which they worked on teams to address prescribed problems encountered during the activities. The highly structured, Plan-Do-Check-Act approach commonly used in industry was adapted for the DHH student participants to document and communicate the problem-solving steps. Students who experienced the intervention realized a 14.6% improvement in problem-solving proficiency compared with a control group, and this gain was retained at 6 and 12 months, post-intervention. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A model and solving algorithm of combination planning for weapon equipment based on Epoch-era analysis method

Science.gov (United States)

Wang, Meng; Zhang, Huaiqiang; Zhang, Kan

2017-10-01

Focused on the circumstance that the equipment using demand in the short term and the development demand in the long term should be made overall plans and took into consideration in the weapons portfolio planning and the practical problem of the fuzziness in the definition of equipment capacity demand. The expression of demand is assumed to be an interval number or a discrete number. With the analysis method of epoch-era, a long planning cycle is broke into several short planning cycles with different demand value. The multi-stage stochastic programming model is built aimed at maximize long-term planning cycle demand under the constraint of budget, equipment development time and short planning cycle demand. The scenario tree is used to discretize the interval value of the demand, and genetic algorithm is designed to solve the problem. At last, a case is studied to demonstrate the feasibility and effectiveness of the proposed mode.

Optimal planning in a developing industrial microgrid with sensitive loads

Directory of Open Access Journals (Sweden)

M. Naderi

2017-11-01

Full Text Available Computer numerical control (CNC machines are known as sensitive loads in industrial estates. These machines require reliable and qualified electricity in their often long work periods. Supplying these loads with distributed energy resources (DERs in a microgrid (MG can be done as an appropriate solution. The aim of this paper is to analyze the implementation potential of a real and developing MG in Shad-Abad industrial estate, Tehran, Iran. Three MG planning objectives are considered including assurance of sustainable and secure operation of CNC machines as sensitive loads, minimizing the costs of MG construction and operation, and using available capacities to penetrate the highest possible renewable energy sources (RESs which subsequently results in decreasing the air pollutants specially carbon dioxide (CO2. The HOMER (hybrid optimization model for electric renewable software is used to specify the technical feasibility of MG planning and to select the best plan economically and environmentally. Different scenarios are considered in this regard to determine suitable capacity of production participants, and to assess the MG indices such as the reliability.

Transformational and transactional leadership and problem solving in restaurant industry

OpenAIRE

Huhtala, Nina

2013-01-01

The study tries to give information on the leadership behavior of restaurant managers in their problem solving. The results of the study were collected by evaluating three restaurant managers by interviewing them. The restaurant managers’ answers were compared to transformational and transactional leadership model and the aspects of it. Their problem solving skills were evaluated by the help of a rational and creative problem solving model. The study showed that restaurant managers have both ...

LDRD final report for improving human effectiveness for extreme-scale problem solving : assessing the effectiveness of electronic brainstorming in an industrial setting.

Energy Technology Data Exchange (ETDEWEB)

Dornburg, Courtney C.; Stevens, Susan Marie; Davidson, George S.; Hendrickson, Stacey M. Langfitt

2008-09-01

An experiment was conducted comparing the effectiveness of individual versus group electronic brainstorming in order to address difficult, real world challenges. While industrial reliance on electronic communications has become ubiquitous, empirical and theoretical understanding of the bounds of its effectiveness have been limited. Previous research using short-term, laboratory experiments have engaged small groups of students in answering questions irrelevant to an industrial setting. The present experiment extends current findings beyond the laboratory to larger groups of real-world employees addressing organization-relevant challenges over the course of four days. Employees and contractors at a national security laboratory participated, either in a group setting or individually, in an electronic brainstorm to pose solutions to a 'wickedly' difficult problem. The data demonstrate that (for this design) individuals perform at least as well as groups in producing quantity of electronic ideas, regardless of brainstorming duration. However, when judged with respect to quality along three dimensions (originality, feasibility, and effectiveness), the individuals significantly (p<0.05) out-performed the group working together. When idea quality is used as the benchmark of success, these data indicate that work-relevant challenges are better solved by aggregating electronic individual responses, rather than electronically convening a group. This research suggests that industrial reliance upon electronic problem solving groups should be tempered, and large nominal groups might be the more appropriate vehicle for solving wicked corporate issues.

Emergency planning and preparedness for the deliberate release of toxic industrial chemicals.

Science.gov (United States)

Russell, David; Simpson, John

2010-03-01

Society in developed and developing countries is hugely dependent upon chemicals for health, wealth, and economic prosperity, with the chemical industry contributing significantly to the global economy. Many chemicals are synthesized, stored, and transported in vast quantities and classified as high production volume chemicals; some are recognized as being toxic industrial chemicals (TICs). Chemical accidents involving chemical installations and transportation are well recognized. Such chemical accidents occur with relative frequency and may result in large numbers of casualties with acute and chronic health effects as well as fatalities. The large-scale production of TICs, the potential for widespread exposure and significant public health impact, together with their relative ease of acquisition, makes deliberate release an area of potential concern. The large numbers of chemicals, together with the large number of potential release scenarios means that the number of possible forms of chemical incident are almost infinite. Therefore, prior to undertaking emergency planning and preparedness, it is necessary to prioritize risk and subsequently mitigate. This is a multi-faceted process, including implementation of industrial protection layers, substitution of hazardous chemicals, and relocation away from communities. Residual risk provides the basis for subsequent planning. Risk-prioritized emergency planning is a tool for identifying gaps, enhancing communication and collaboration, and for policy development. It also serves to enhance preparedness, a necessary prelude to preventing or mitigating the public health risk to deliberate release. Planning is an iterative and on-going process that requires multi-disciplinary agency input, culminating in the formation of a chemical incident plan complimentary to major incident planning. Preparedness is closely related and reflects a state of readiness. It is comprised of several components, including training and exercising

Planning under uncertainty solving large-scale stochastic linear programs

Energy Technology Data Exchange (ETDEWEB)

Infanger, G. [Stanford Univ., CA (United States). Dept. of Operations Research]|[Technische Univ., Vienna (Austria). Inst. fuer Energiewirtschaft

1992-12-01

For many practical problems, solutions obtained from deterministic models are unsatisfactory because they fail to hedge against certain contingencies that may occur in the future. Stochastic models address this shortcoming, but up to recently seemed to be intractable due to their size. Recent advances both in solution algorithms and in computer technology now allow us to solve important and general classes of practical stochastic problems. We show how large-scale stochastic linear programs can be efficiently solved by combining classical decomposition and Monte Carlo (importance) sampling techniques. We discuss the methodology for solving two-stage stochastic linear programs with recourse, present numerical results of large problems with numerous stochastic parameters, show how to efficiently implement the methodology on a parallel multi-computer and derive the theory for solving a general class of multi-stage problems with dependency of the stochastic parameters within a stage and between different stages.

Optimization in underground mine planning - developments and opportunities

OpenAIRE

Musingwini, C.

2016-01-01

The application of mining-specific and generic optimization techniques in the mining industry is deeply rooted in the discipline of operations research (OR). OR has its origins in the British Royal Air Force and Army around the early 1930s. Its development continued during and after World War II. The application of OR techniques to optimization in the mining industry started to emerge in the early 1960s. Since then, optimization techniques have been applied to solve widely different mine plan...

Human-resource planning in the Venezuelan oil industry

Energy Technology Data Exchange (ETDEWEB)

Delgado, S J.V.

1985-01-01

Because the economy of Venezuela is heavily dependent on its oil industry, the company Petroleos de Venezuela S.A. was chosen for the detailed study. It was found that the system in use in the period 1980-81 was defective in that it did not address the serious medium- and long-term issues of manpower supply in a country seriously short of the skills needed. There was a lack of linkage between human resource planning and the corporation's long term objectives. Too much emphasis was being placed on quantitative, and too little on qualitative approaches to the problem. A new approach was developed to complement the existing shorter term quantitative approach. This involved a direct and active interaction with corporate planning. Within this framework a qualitative method of human resource planning was proposed and implemented. It has proved its usefulness in defining the type of personnel required by the organization in the distant future.

An Approach for Solving Linear Fractional Programming Problems

OpenAIRE

Andrew Oyakhobo Odior

2012-01-01

Linear fractional programming problems are useful tools in production planning, financial and corporate planning, health care and hospital planning and as such have attracted considerable research interest. The paper presents a new approach for solving a fractional linear programming problem in which the objective function is a linear fractional function, while the constraint functions are in the form of linear inequalities. The approach adopted is based mainly upon solving the problem algebr...

Succession planning and staff retention challenges: An industrial outlook and major risks

Directory of Open Access Journals (Sweden)

Sindisiwe Bonisile Maphisa

2017-07-01

Full Text Available The sugar manufacturing industry in the emerging economy is potentially at high risk of not achieving its goals of increasing production output. This is due to higher than average age of growers, nonexistence of effective succession planning to expedite the transition to a new generation of growers, related increasing departure of farmers from the industry and difficulty in attracting new talent to the industry due to the high cost of entry. This research sought to explore managements’ perceptions of succession planning and the impact it has on retention at a Sugar Manufacturing Company. In order to achieve the research aim and objectives, a qualitative approach was utilised in the form of an exploratory case study. A single case study was also chosen because this is a critical, unique and revelatory case and the researchers had access to the case previously inaccessible to empirical research. Purposive sampling was used and total of 15 managers participated in this study. The study found that the company is not doing enough to implement succession planning programmes even though there are potential candidates who can be trained and developed into management positions.

Combining computational modelling with radioisotope technology for a more cost- effective and time-efficient method of solving industrial and medical diagnostic problems

International Nuclear Information System (INIS)

Tu, J.Y.; Easey, J.F.; Burch, W.M.

1997-01-01

In this paper, some work on computational modelling for industrial operations and processes will be presented, for example, the modelling of fly-ash flow and the associated prediction of erosion in power utility boilers. The introduction and use of new formulations of encapsulated radioisotopes, currently being research at ANSTO, will open up further possibilities for the utilisation of radiotracer applications for a wider range of validation work not only in industrial but also in medical investigations. Applications of developed models to solving industrial problems will also be discussed in the paper

A novel algorithm for solving optimal path planning problems based on parametrization method and fuzzy aggregation

International Nuclear Information System (INIS)

Zamirian, M.; Kamyad, A.V.; Farahi, M.H.

2009-01-01

In this Letter a new approach for solving optimal path planning problems for a single rigid and free moving object in a two and three dimensional space in the presence of stationary or moving obstacles is presented. In this approach the path planning problems have some incompatible objectives such as the length of path that must be minimized, the distance between the path and obstacles that must be maximized and etc., then a multi-objective dynamic optimization problem (MODOP) is achieved. Considering the imprecise nature of decision maker's (DM) judgment, these multiple objectives are viewed as fuzzy variables. By determining intervals for the values of these fuzzy variables, flexible monotonic decreasing or increasing membership functions are determined as the degrees of satisfaction of these fuzzy variables on their intervals. Then, the optimal path planning policy is searched by maximizing the aggregated fuzzy decision values, resulting in a fuzzy multi-objective dynamic optimization problem (FMODOP). Using a suitable t-norm, the FMODOP is converted into a non-linear dynamic optimization problem (NLDOP). By using parametrization method and some calculations, the NLDOP is converted into the sequence of conventional non-linear programming problems (NLPP). It is proved that the solution of this sequence of the NLPPs tends to a Pareto optimal solution which, among other Pareto optimal solutions, has the best satisfaction of DM for the MODOP. Finally, the above procedure as a novel algorithm integrating parametrization method and fuzzy aggregation to solve the MODOP is proposed. Efficiency of our approach is confirmed by some numerical examples.

Italy’s “Industry 4.0” Plan: A labour law analysis

Directory of Open Access Journals (Sweden)

Michele Tiraboschi

2016-12-01

Full Text Available New technologies and productive models lie at the heart of so-called Indus-try 4.0, a concept which has recently entered socio-economic and political discourse in a number of countries. Lately, Italy too has presented an action plan on Industry 4.0 and some operational measures on this issue have al-ready been envisaged in the Budget Law for 2017. Consequently, the aim of this paper is to look at Italy’s Industry 4.0 plan, focusing on consequences arising from labour law. The labour law perspective has been given scant consideration in the public debate, seeing that so far the latter has given pri-ority on technological aspects and on economic resources needed to imple-ment the plan. An approach of this kind enables us to appreciate the major changes that the Industry 4.0 paradigm will bring about in labour markets – either inside or outside companies – and in industrial relations. The idea of labour and that of doing business will also be questioned, leading to the conclusion that labour rules and active policies can also be factors enabling new productive processes. Examining the major challenges posed by Indus-try 4.0 to workers and employers (e.g. the crisis of subordination, the new roles of skills, the risk of technological unemployment, new decentralized and participatory forms of collective bargaining, this paper sets out to iden-tify actions and perspectives to manage current changes, focusing on work-ers rather than on those technologies that will be used to work in the years to come. In the authors’ opinion, this perspective might help raise awareness that labour law is not only tasked with providing protection and resources and with favouring production, but it has important functions in historical and political terms. Therefore, this branch of law is not doomed to be set aside following the demise of Fordism, but it will innovate over time to ena-ble and balance the new productive model underlying Industry 4.0., particu

Safety in times of crises - the importance of industrial emergency plans

International Nuclear Information System (INIS)

Rademacher, H.; Schulten, R.

1989-01-01

Technical and organizational precautions cannot always avoid everyday risks such as accidents, fire, explosions, and other critical situations which without appropriate countermeasures can easily develop into emergencies. While in recent years considerable efforts have been going into improving the technical safety of industrial plants particularly susceptible to accidents (e.g. the nuclear and chemical industry), organizational safety seems to have been neglected. An analysis of different accidents reveals human fallibility rather than technical failures to be causing damage in many cases. Industrial emergency plans are considered to be contributing to the improvement of organizational safety. (orig.) [de

Contingency planning for oil spill response: A program of joint IMO/oil industry regional seminars

International Nuclear Information System (INIS)

Bavister, R.; Wonham, J.

1993-01-01

Cooperative efforts between the oil industry and governments at the national and local levels have resulted in a series of reports for both technical and general audiences on subjects relating to oil spills, as well as an ongoing series of government/industry regional seminars for senior executives. The seminars emphasize the crucial importance of joint government/industry attention to contingency planning. These activities, which are continuing, are organized under the auspices of an International Petroleum Industry Environmental Conservation Association working group, and the International Maritime Organization. Feedback is solicited from seminar participants for use in planning further seminars and to give the IMO a clear picture of follow up activities that have resulted from the seminars

Optimization-based decision support systems for planning problems in processing industries

OpenAIRE

Claassen, G.D.H.

2014-01-01

Summary Optimization-based decision support systems for planning problems in processing industries Nowadays, efficient planning of material flows within and between supply chains is of vital importance and has become one of the most challenging problems for decision support in practice. The tremendous progress in hard- and software of the past decades was an important gateway for developing computerized systems that are able to support decision making on different levels within enterprises. T...

Assessing problem-solving skills in construction education with the virtual construction simulator

Science.gov (United States)

Castronovo, Fadi

The ability to solve complex problems is an essential skill that a construction and project manager must possess when entering the architectural, engineering, and construction industry. Such ability requires a mixture of problem-solving skills, ranging from lower to higher order thinking skills, composed of cognitive and metacognitive processes. These skills include the ability to develop and evaluate construction plans and manage the execution of such plans. However, in a typical construction program, introducing students to such complex problems can be a challenge, and most commonly the learner is presented with only part of a complex problem. To support this challenge, the traditional methodology of delivering design, engineering, and construction instruction has been going through a technological revolution, due to the rise of computer-based technology. For example, in construction classrooms, and other disciplines, simulations and educational games are being utilized to support the development of problem-solving skills. Previous engineering education research has illustrated the high potential that simulations and educational games have in engaging in lower and higher order thinking skills. Such research illustrated their capacity to support the development of problem-solving skills. This research presents evidence supporting the theory that educational simulation games can help with the learning and retention of transferable problem-solving skills, which are necessary to solve complex construction problems. The educational simulation game employed in this study is the Virtual Construction Simulator (VCS). The VCS is a game developed to provide students in an engaging learning activity that simulates the planning and managing phases of a construction project. Assessment of the third iteration of the VCS(3) game has shown pedagogical value in promoting students' motivation and a basic understanding of construction concepts. To further evaluate the benefits on

Radioisotope techniques for problem solving in the offshore oil and gas industry

International Nuclear Information System (INIS)

Charlton, J.S.; Hurst, J.A.

1994-01-01

Radioisotope technology has been used for almost half a century by the oil and gas industry to solve problems and to help optimize process operations. The use of radioactive isotopes to investigate the effectiveness of well stimulation procedures and to measure the sweep-out patterns of oil and gas in secondary recovery process is well known. The applications of radioisotopes to study features of plant and process operation has been less widely reported though the economic benefits deriving from such applications are very great. Nevertheless, there has been continuous development in the range of application and in the design of equipment to facilitate the use of the technology at remote environments such as an oil or gas platform. Some indication of the current usage of radioisotope techniques may be obtained from examination of Table I, which lists projects carried out in the UK's North Sea fields by ICI Tracerco, which is the world's largest radioisotope applications service group

Autonomous path planning solution for industrial robot manipulator using backpropagation algorithm

Directory of Open Access Journals (Sweden)

PeiJiang Yuan

2015-12-01

Full Text Available Here, we propose an autonomous path planning solution using backpropagation algorithm. The mechanism of movement used by humans in controlling their arms is analyzed and then applied to control a robot manipulator. Autonomous path planning solution is a numerical method. The model of industrial robot manipulator used in this article is a KUKA KR 210 R2700 EXTRA robot. In order to show the performance of the autonomous path planning solution, an experiment validation of path tracking is provided. Experiment validation consists of implementation of the autonomous path planning solution and the control of physical robot. The process of converging to target solution is provided. The mean absolute error of position for tool center point is also analyzed. Comparison between autonomous path planning solution and the numerical methods based on Newton–Raphson algorithm is provided to demonstrate the efficiency and accuracy of the autonomous path planning solution.

Tangram solved? Prefrontal cortex activation analysis during geometric problem solving.

Science.gov (United States)

Ayaz, Hasan; Shewokis, Patricia A; Izzetoğlu, Meltem; Çakır, Murat P; Onaral, Banu

2012-01-01

Recent neuroimaging studies have implicated prefrontal and parietal cortices for mathematical problem solving. Mental arithmetic tasks have been used extensively to study neural correlates of mathematical reasoning. In the present study we used geometric problem sets (tangram tasks) that require executive planning and visuospatial reasoning without any linguistic representation interference. We used portable optical brain imaging (functional near infrared spectroscopy--fNIR) to monitor hemodynamic changes within anterior prefrontal cortex during tangram tasks. Twelve healthy subjects were asked to solve a series of computerized tangram puzzles and control tasks that required same geometric shape manipulation without problem solving. Total hemoglobin (HbT) concentration changes indicated a significant increase during tangram problem solving in the right hemisphere. Moreover, HbT changes during failed trials (when no solution found) were significantly higher compared to successful trials. These preliminary results suggest that fNIR can be used to assess cortical activation changes induced by geometric problem solving. Since fNIR is safe, wearable and can be used in ecologically valid environments such as classrooms, this neuroimaging tool may help to improve and optimize learning in educational settings.

Counterfactual Problem Solving and Situated Cognition

Directory of Open Access Journals (Sweden)

Glebkin V.V.,

2017-08-01

Full Text Available The paper describes and interprets data of a study on counterfactual problem solving in representatives of modern industrial culture. The study was inspired by similar experiments carried out by A.R. Luria during his expedition to Central Asia. The hypothesis of our study was that representatives of modern industrial culture would solve counterfactual puzzles at a slower rate and with higher numbers of mistakes than similar non-counterfactual tasks. The experiments we conducted supported this hypothesis as well as provided us with some insights as to how to further develop it. For instance, we found no significant differences in time lag in solving counterfactual and ‘realistic’ tasks between the subjects with mathematical and the ones with liberal arts education. As an interpretation of the obtained data, we suggest a two-stage model of counterfactual problem solving: on the first stage, where situated cognition dominates, the realistic situation is transferred into the system of symbols unrelated to this very situation; on the second stage, operations are carried out within the framework of this new system of symbols.

Integrating marker passing and problem solving a spreading activation approach to improved choice in planning

CERN Document Server

Hendler, James A

2014-01-01

A recent area of interest in the Artificial Intelligence community has been the application of massively parallel algorithms to enhance the choice mechanism in traditional AI problems. This volume provides a detailed description of how marker-passing -- a parallel, non-deductive, spreading activation algorithm -- is a powerful approach to refining the choice mechanisms in an AI problem-solving system. The author scrutinizes the design of both the algorithm and the system, and then reviews the current literature and research in planning and marker passing. Also included: a comparison of this

Plans for industrial production of the SSC magnets

International Nuclear Information System (INIS)

Karpenko, V.N.; Rardin, D.C.

1986-01-01

The Universities Research Association through its Central Design Group is currently conducting research and development for the Department of Energy on a superconducting super collider (SSC). The proposed SSC is a device in which protons would be accelerated around a ring approximately 50 miles in circumference. The protons would be kept in their path by means of thousands of powerful superconducting magnets. Two such rings of magnets would be housed in a common underground tunnel, allowing groups of protons to be accelerated in opposite directions and collided, in order to study the fundamental nature of matter and energy. The magnet system is a major element of the SSC in terms of technical requirements, quantity of components and cost. In order to meet technical and production requirements imposed by this system early participation of industry is necessary. The program plans were developed with the objective to involve industry in the early stages of research and development of superconducting magnets, leading to cost effective processes of potential mass production of high quality accelerator magnets by industry. While a decision has not been made by the Department of Energy on whether or not to request construction of the SSC project, if such a request is made and the project is authorized and funded, it would lead to industrial manufacture of a large quantity of superconducting magnets

Is innovative workforce planning software the solution to NHS staffing and cost crisis? An exploration of the locum industry.

Science.gov (United States)

Theodoulou, Iakovos; Reddy, Akshaya Mohan; Wong, Jeremy

2018-03-20

Workforce planning in the British healthcare system (NHS) is associated with significant costs of agency staff employment. The introduction of a novel software (ABG) as a 'people to people economy' (P2PE) platform for temporary staff recruitment offers a potential solution to this problem. Consequently, the focus of this study was twofold - primarily to explore the locum doctor landscape, and secondarily to evaluate the implementation of P2PE in the healthcare industry. Documentary analysis was conducted alongside thirteen semi structured interviews across five informant groups: two industry experts, two healthcare consultants, an executive director, two speciality managers and six doctors. We found that locum doctors are indispensable to covering workforce shortages, yet existing planning and recruitment practices were found to be inefficient, inconsistent and lacking transparency. Contrarily, mobile-first solutions such as ABG seem to secure higher convenience, better transparency, cost and time efficiency. We also identified factors facilitating the successful diffusion of ABG; these were in line with classically cited characteristics of innovation such as trialability, observability, and scope for local reinvention. Drawing upon the concept of value-based healthcare coupled with the analysis of our findings led to the development of Information Exchange System (IES) model, a comprehensive framework allowing a thorough comparison of recruitment practices in healthcare. IES was used to evaluate ABG and its diffusion against other recruitment methods and ABG was found to outperform its alternatives, thus suggesting its potential to solve the staffing and cost crisis at the chosen hospital.

Implementation Plan for Chemical Industry R&D Roadmap for Nanomaterials by Design

Energy Technology Data Exchange (ETDEWEB)

none,

2006-04-01

The purpose of this effort is to develop an implementation plan to realize the vision and goals identified in the Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function.

Conceptual problem solving in high school physics

OpenAIRE

Jennifer L. Docktor; Natalie E. Strand; José P. Mestre; Brian H. Ross

2015-01-01

Problem solving is a critical element of learning physics. However, traditional instruction often emphasizes the quantitative aspects of problem solving such as equations and mathematical procedures rather than qualitative analysis for selecting appropriate concepts and principles. This study describes the development and evaluation of an instructional approach called Conceptual Problem Solving (CPS) which guides students to identify principles, justify their use, and plan their solution in w...

Planning and control of rework in the process industries: a review

NARCIS (Netherlands)

Flapper, S.D.P.; Fransoo, J.C.; Broekmeulen, R.A.C.M.; Inderfurth, K.

2002-01-01

For all kinds of reasons, rework, i.e. the transformation of products not fulfilling preset specifications into products that do, is an important issue in process industries. Despite a considerable amount of published research on planning and control of rework, and in addition many papers referring

Resource Conservation and Recovery Act Industrial Sites quality assurance project plan: Nevada Test Site, Nevada

International Nuclear Information System (INIS)

1994-06-01

This quality assurance project plan (QAPjP) describes the measures that shall be taken to ensure that the environmental data collected during characterization and closure activities of Resource Conservation and Recovery Act (RCRA) Industrial Sites at the Nevada Test Site (NTS) are meaningful, valid, defensible, and can be used to achieve project objectives. These activities are conducted by the US Department of Energy Nevada Operations Office (DOE/NV) under the Nevada Environmental Restoration (ER) Project. The Nevada ER Project consists of environmental restoration activities on the NTS, Tonopah Test Range, Nellis Air Force Range, and eight sites in five other states. The RCRA Industrial Sites subproject constitutes a component of the Nevada ER Project. Currently, this QAPjP is limited to the seven RCRA Industrial Sites identified within this document that are to be closed under an interim status and pertains to all field- investigation, analytical-laboratory, and data-review activities in support of these closures. The information presented here supplements the RCRA Industrial Sites Project Management Plan and is to be used in conjunction with the site-specific subproject sampling and analysis plans

A Multivariate Model of Physics Problem Solving

Science.gov (United States)

Taasoobshirazi, Gita; Farley, John

2013-01-01

A model of expertise in physics problem solving was tested on undergraduate science, physics, and engineering majors enrolled in an introductory-level physics course. Structural equation modeling was used to test hypothesized relationships among variables linked to expertise in physics problem solving including motivation, metacognitive planning,…

Cooperative Path Planning and Constraints Analysis for Master-Slave Industrial Robots

Directory of Open Access Journals (Sweden)

Yahui Gan

2012-09-01

Full Text Available A strategy of cooperative path planning for a master-slave multiple robot system is presented in this paper. The path planning method is based on motion constraints between the end-effectors of cooperative robots. Cooperation motions have been classified into three types by relative motions between end-effectors of master and slave robots, which is concurrent cooperation, coupled synchronous cooperation and combined synchronous cooperation. Based on this classification, position /orientation constraints and joint velocity constraints are explored in-depth here. In order to validate the path planning method and the theoretical developments in motion constraints analysis, representative experiments based on two industrial robots, Motoman VA1400 and HP20, are provided at the end of the paper. The experimental results have proved both the effectiveness of the path planning method and the correctness of the constraints analysis.

An industrial robot singular trajectories planning based on graphs and neural networks

Science.gov (United States)

Łęgowski, Adrian; Niezabitowski, Michał

2016-06-01

Singular trajectories are rarely used because of issues during realization. A method of planning trajectories for given set of points in task space with use of graphs and neural networks is presented. In every desired point the inverse kinematics problem is solved in order to derive all possible solutions. A graph of solutions is made. The shortest path is determined to define required nodes in joint space. Neural networks are used to define the path between these nodes.

Industrial Fuel Gas Demonstration Plant Program: environmental permit compliance plan

Energy Technology Data Exchange (ETDEWEB)

Bodamer, Jr., James W.; Bocchino, Robert M.

1979-11-01

This Environmental Permit Compliance Plan is intended to assist the Memphis Light, Gas and Water Division in acquiring the necessary environmental permits for their proposed Industrial Fuel Gas Demonstration Plant in a time frame consistent with the construction schedule. Permits included are those required for installation and/or operation of gaseous, liquid and solid waste sources and disposal areas. Only those permits presently established by final regulations are described. The compliance plan describes procedures for obtaining each permit from identified federal, state and local agencies. The information needed for the permit application is presented, and the stepwise procedure to follow when filing the permit application is described. Information given in this plan was obtained by reviewing applicable laws and regulations and from telephone conversations with agency personnel on the federal, state and local levels. This Plan also presents a recommended schedule for beginning the work necessary to obtain the required environmental permits in order to begin dredging operations in October, 1980 and construction of the plant in September, 1981. Activity for several key permits should begin as soon as possible.

Components and renewal parts in the nuclear power industry

International Nuclear Information System (INIS)

Clark, T.F. Jr.

1986-01-01

This paper indicates that the nuclear parts industry has been forced to make major investments in time, personnel and financial resources in order to solve short term/emergency procurement problems. What is required, as was previously indicated, is a coordinated industry-wide effort toward long range planning and implementation of a program that addresses these issues. The industry is developing programs directed toward inventory optimization and ''innovative-creative'' financing of manufacturing inventory/work-in-process in an effort to significantly reduce delivery lead times. Product transition, utilization of cancelled plant equipment, equipment qualification programs, and dedication of commercially manufactured/procured parts and components for safety related application continue to be major elements of our program to support current utility requirements

Integrated production planning and water management in the food industry: A cheese production case study

NARCIS (Netherlands)

Pulluru, Sai Jishna; Akkerman, Renzo; Hottenrott, Andreas

2017-01-01

Efficient water management is increasingly relevant in the food industry. Exploiting water reuse opportunities in planning production activities is a key part of this. We study integrated water management and production planning in cheese production. For this, we develop a water-integrated lot

A Matheuristic Approach for Solving the Railroad Hump Yard Block-to-Track Assignment

DEFF Research Database (Denmark)

Haahr, Jørgen Thorlund; Lusby, Richard Martin

dependent subproblems. Optimization-based strategies are adopted for two of these, while the third is solved using a greedy heuristic. We demonstrate the efficiency of the complete framework on the official datasets, where solutions within 4-14% of a known lower bound (to a relaxed problem) are found. We......This paper presents a novel matheuristic for solving the Hump Yard Block-to-Track Assignment Problem. This is an important problem rising in the railway freight industry and involves scheduling the transitions of a set of rail cars from a set of inbound trains to a set of outbound trains over...... a certain planning horizon. It was also the topic of the 2014 challenge organised by the Railway Applications Section of the Institute for Operations Research and the Management Sciences for which the proposed matheuristic was awarded first prize. Our approach decomposes the problem into three highly...

The Budgeting as an Instrument of the Financial Planning System of Industrial Enterprises

Directory of Open Access Journals (Sweden)

Fedorenko Iryna A.

2018-02-01

Full Text Available The article is concerned with generalization of conceptual aspects of budgeting at industrial enterprise. The existing approaches of researchers to the essence of the concept of «budgeting» have been systematized. The subject, object, purpose, tasks, principles, and functions of the budgeting process have been defined. As a result of the research, the budgeting system and the stages of budgetary planning at the industrial enterprise have been structured in detail. The role and possibilities of budgeting for effective management of financial and economic activity of industrial enterprises have been clarified. Also the negative features of budgeting are described, which can affect the efficiency of its implementation in the practice of industrial enterprises. Directions for improvement of budgeting system at industrial enterprises have been defined.

Can I solve my structure by SAD phasing? Planning an experiment, scaling data and evaluating the useful anomalous correlation and anomalous signal.

Science.gov (United States)

Terwilliger, Thomas C; Bunkóczi, Gábor; Hung, Li Wei; Zwart, Peter H; Smith, Janet L; Akey, David L; Adams, Paul D

2016-03-01

A key challenge in the SAD phasing method is solving a structure when the anomalous signal-to-noise ratio is low. Here, algorithms and tools for evaluating and optimizing the useful anomalous correlation and the anomalous signal in a SAD experiment are described. A simple theoretical framework [Terwilliger et al. (2016), Acta Cryst. D72, 346-358] is used to develop methods for planning a SAD experiment, scaling SAD data sets and estimating the useful anomalous correlation and anomalous signal in a SAD data set. The phenix.plan_sad_experiment tool uses a database of solved and unsolved SAD data sets and the expected characteristics of a SAD data set to estimate the probability that the anomalous substructure will be found in the SAD experiment and the expected map quality that would be obtained if the substructure were found. The phenix.scale_and_merge tool scales unmerged SAD data from one or more crystals using local scaling and optimizes the anomalous signal by identifying the systematic differences among data sets, and the phenix.anomalous_signal tool estimates the useful anomalous correlation and anomalous signal after collecting SAD data and estimates the probability that the data set can be solved and the likely figure of merit of phasing.

Niger Republic, mineral planning (part one)-Mining industries in socio-political and national economy framework

International Nuclear Information System (INIS)

Joo, Julien

1982-01-01

This document focus on Niger Republic mineral industries related points that are: socio-political and economical context; specific characters such as administrative, juridical and fiscal environment; citizens employment and training; actual situation and energy projects; transport; existing mining companies, construction materials enterprises and projects presentation; effect of mining sector and construction material on national economy and prior major problems to be solved [fr

Repetitive motion planning and control of redundant robot manipulators

CERN Document Server

Zhang, Yunong

2013-01-01

Repetitive Motion Planning and Control of Redundant Robot Manipulators presents four typical motion planning schemes based on optimization techniques, including the fundamental RMP scheme and its extensions. These schemes are unified as quadratic programs (QPs), which are solved by neural networks or numerical algorithms. The RMP schemes are demonstrated effectively by the simulation results based on various robotic models; the experiments applying the fundamental RMP scheme to a physical robot manipulator are also presented. As the schemes and the corresponding solvers presented in the book have solved the non-repetitive motion problems existing in redundant robot manipulators, it is of particular use in applying theoretical research based on the quadratic program for redundant robot manipulators in industrial situations. This book will be a valuable reference work for engineers, researchers, advanced undergraduate and graduate students in robotics fields. Yunong Zhang is a professor at The School of Informa...

Assertiveness and problem solving in midwives.

Science.gov (United States)

Yurtsal, Zeliha Burcu; Özdemir, Levent

2015-01-01

Midwifery profession is required to bring solutions to problems and a midwife is expected to be an assertive person and to develop midwifery care. This study was planned to examine the relationship between assertiveness and problem-solving skills of midwives. This cross-sectional study was conducted with 201 midwives between July 2008 and February 2009 in the city center of Sivas. The Rathus Assertiveness Schedule (RAS) and Problem Solving Inventory (PSI) were used to determine the level of assertiveness and problem-solving skills of midwives. Statistical methods were used as mean, standard deviation, percentage, Student's T, ANOVA and Tukey HSD, Kruskal Wallis, Fisher Exact, Pearson Correlation and Chi-square tests and P problem-solving skills training. A statistically significant negative correlation was found between the RAS and PSI scores. The RAS scores decreased while the problem-solving scores increased (r: -0451, P problem solving skills of midwives, and midwives who were assertive solved their problems better than did others. Assertiveness and problem-solving skills training will contribute to the success of the midwifery profession. Midwives able to solve problems, and display assertive behaviors will contribute to the development of midwifery profession.

Optimizing Maintenance Planning in the Production Industry Using the Markovian Approach

Directory of Open Access Journals (Sweden)

B Kareem

2012-12-01

Full Text Available Maintenance is an essential activity in every manufacturing establishment, as manufacturing effectiveness counts on the functionality of production equipment and machinery in terms of their productivity and operational life. Maintenance cost minimization can be achieved by adopting an appropriate maintenance planning policy. This paper applies the Markovian approach to maintenance planning decision, thereby generating optimal maintenance policy from the identified alternatives over a specified period of time. Markov chains, transition matrices, decision processes, and dynamic programming models were formulated for the decision problem related to maintenance operations of a cable production company. Preventive and corrective maintenance data based on workloads and costs, were collected from the company and utilized in this study. The result showed variability in the choice of optimal maintenance policy that was adopted in the case study. Post optimality analysis of the process buttressed the claim. The proposed approach is promising for solving the maintenance scheduling decision problems of the company.

On improving the NPP construction long-term planning

International Nuclear Information System (INIS)

Solov'ev, M.M.

1980-01-01

General approaches to solving the problems of long-term planning of the construction-mounting work volume and introduction of power capacities at different paces of power unit commission and norms of construction time are considered. Problems associated with location and development of subsidiary industries providing NPP construction are discussed. It is shown that decrease of WWER-1000 reactor type NPP construction time from 24 to 12 months results in reduction of required high-skilled engineers, managerial staff, unique construction mechanisms and engines as well as in improvement of conditions for conducting measures on work arrangement during preparation of construction industry and mounting of the first assemblies

Strategic planning model for Startups: A case study of Iranian packaging industry

Directory of Open Access Journals (Sweden)

Mohammad Mahdavi Mazdeh

2011-04-01

Full Text Available In today’s turbulent and competitive world, strategic planning plays an important role for the success of firms. Despite the fact that there are literally numerous models proposed for different companies in various states and structures, the possibility of using strategic planning for startups has never been seriously considered. In this paper, we present a survey by asking experts to find out whether strategic planning is suitable for startups. We also propose a model for strategic planning in startups based on the strategic planning models for small businesses and entrepreneurship concepts. The model is similar to other models and what differentiates this models form other approaches is the methodology used for internal and external analysis and the parameters taken into consideration. The proposed model is examined on an Iranian food packaging industry for validation. The preliminary results indicate that the success of startups depends on two sets of parameters: “entrepreneurial opportunities” and “competitive advantages and entrepreneurial characteristics”.

The uranium industry: long term planning for short term competition

International Nuclear Information System (INIS)

Vottero, X.

2000-01-01

Today, uranium producers face new challenges in terms of both production (new regulatory, environmental and social constraints) and market conditions (new sources of uranium supply, very low prices and tough competition). In such a context, long-term planning is not just a prerequisite to survive in the nuclear fuel cycle industry. In fact, it also contributes to sustaining nuclear electricity generation facing fierce competition from other energy sources in increasingly deregulated markets. (authors)

Trajectory planning and optimal tracking for an industrial mobile robot

Science.gov (United States)

Hu, Huosheng; Brady, J. Michael; Probert, Penelope J.

1994-02-01

This paper introduces a unified approach to trajectory planning and tracking for an industrial mobile robot subject to non-holonomic constraints. We show (1) how a smooth trajectory is generated that takes into account the constraints from the dynamic environment and the robot kinematics; and (2) how a general predictive controller works to provide optimal tracking capability for nonlinear systems. The tracking performance of the proposed guidance system is analyzed by simulation.

Students’ difficulties in probabilistic problem-solving

Science.gov (United States)

Arum, D. P.; Kusmayadi, T. A.; Pramudya, I.

2018-03-01

There are many errors can be identified when students solving mathematics problems, particularly in solving the probabilistic problem. This present study aims to investigate students’ difficulties in solving the probabilistic problem. It focuses on analyzing and describing students errors during solving the problem. This research used the qualitative method with case study strategy. The subjects in this research involve ten students of 9th grade that were selected by purposive sampling. Data in this research involve students’ probabilistic problem-solving result and recorded interview regarding students’ difficulties in solving the problem. Those data were analyzed descriptively using Miles and Huberman steps. The results show that students have difficulties in solving the probabilistic problem and can be divided into three categories. First difficulties relate to students’ difficulties in understanding the probabilistic problem. Second, students’ difficulties in choosing and using appropriate strategies for solving the problem. Third, students’ difficulties with the computational process in solving the problem. Based on the result seems that students still have difficulties in solving the probabilistic problem. It means that students have not able to use their knowledge and ability for responding probabilistic problem yet. Therefore, it is important for mathematics teachers to plan probabilistic learning which could optimize students probabilistic thinking ability.

The Quota-Based Compensation Plan in Fashion Retailing Industry under Asymmetric Information

Directory of Open Access Journals (Sweden)

Mingzhu Yu

2014-01-01

Full Text Available We study a compensation plan problem in the fashion retailing industry, which involves a risk-neutral fashion retailer and a risk-neutral salesperson, in a two-stage game framework with asymmetric information. In the first stage, the fashion retailer provides a menu of compensation plans to the salesperson who decides which plan to sign based on his superior market demand information. Confronted with the asymmetric demand information, the fashion retailer could observe market information from the salesperson's response by designing a menu of compensation plans rather than a single one to the salesperson. In the second stage, the fashion retailer then makes production decision and the salesperson determines his selling effort. We consider both adverse selection and moral hazard. We adopt the quota-based plan to derive the fashion retailer’s optimal compensation plan design and the salesperson's best response. We emphasize the impact of the quota level on the system outcomes. The results reveal that a higher quota level is disadvantageous to the fashion retailer but advantageous to the salespersons.

Planning for integrated solid waste management at the industrial Park level: A case of Tianjin, China

International Nuclear Information System (INIS)

Geng Yong; Zhu Qinghua; Haight, Murray

2007-01-01

Industrial parks play a significant role in the production and use of goods and services. The proper management of solid waste is a major challenge for industrial parks due to the large quantity of wastes and the variability of waste characteristics from these types of developments. Therefore, integrated solid waste management has become very crucial to the industrial park managers. Such an approach requires industrial park managers to assess the overall use of resources, and to seek waste reduction, reuse and recycling opportunities both at the individual company level and among different tenant companies. The adoption of this method can bring both economic and environmental benefits. This paper introduces the planning efforts of a real case in China. It first presents the basic information on Tianjin Economic Development Area (TEDA), and then introduces its current practices on solid waste management. The main focus of this paper is to describe how to plan an integrated solid waste management system at TEDA. Benefits and challenges are all identified and analyzed. The experiences and methods from this case study should be applied in other industrial parks so as to improve the overall eco-efficiency of the whole industrial park

Observations on strategic planning of information technology in the Indian coal mining industry

Energy Technology Data Exchange (ETDEWEB)

Owen, D.

1988-05-01

A view of the needs and plans to improve the coal mining industry of India is presented, focusing primarily on telecommunications and computerization. Further, details on mining electronics and vendor relationships with foreign firms are also discussed. 4 refs.

Calculus Problem Solving Behavior of Mathematic Education Students

Science.gov (United States)

Rizal, M.; Mansyur, J.

2017-04-01

The purpose of this study is to obtain a description of the problem-solving behaviour of mathematics education students. The attainment of the purpose consisted of several stages: (1) to gain the subject from the mathematic education of first semester students, each of them who has a high, medium, and low competence of mathematic case. (2) To give two mathematical problems with different characteristics. The first problem (M1), the statement does not lead to a resolution. The second problem (M2), a statement leads to problem-solving. (3) To explore the behaviour of problem-solving based on the step of Polya (Rizal, 2011) by way of thinking aloud and in-depth interviews. The obtained data are analysed as suggested by Miles and Huberman (1994) but at first, time triangulation is done or data’s credibility by providing equivalent problem contexts and at different times. The results show that the behavioral problem solvers (mathematic education students) who are capable of high mathematic competency (ST). In understanding M1, ST is more likely to pay attention to an image first, read the texts piecemeal and repeatedly, then as a whole and more focus to the sentences that contain equations, numbers or symbols. As a result, not all information can be received well. When understanding the M2, ST can link the information from a problem that is stored in the working memory to the information on the long-term memory. ST makes planning to the solution of M1 and M2 by using a formula based on similar experiences which have been ever received before. Another case when implementing the troubleshooting plans, ST complete the M1 according to the plan, but not all can be resolved correctly. In contrast to the implementation of the solving plan of M2, ST can solve the problem according to plan quickly and correctly. According to the solving result of M1 and M2, ST conducts by reading the job based on an algorithm and reasonability. Furthermore, when SS and SR understand the

Economical solution for the industrial waste problem of Karachi industrial area

International Nuclear Information System (INIS)

Mubin, S.

2005-01-01

The increased rate of industrialization coupled with rapid urbanization in Pakistan has given rise to serious water pollution and environmental problems. A vast range of industries has been established in the country during the last twenty five years, including tanneries, fertilizers, textiles, refineries, chemicals, vegetable oils, paper am pulp, sugar and food. Little attention was paid towards a large scale release of wastewater from these industries. Presently wastewater produced from these industries has been considered a serious problem and research in being conducted to solve its associated problems. Recently, it has been realized that there is a significant threat of water borne diseases, degradation of fresh water quality, environmental depletion and soil deterioration from the effluent and toxic emission of industries. Being a developing country and having limited resources, it is hard to install treatment plants on the industrial effluent with every industry before discharging them into streams which are also creating disturbance in natural ecosystem. An effort has been made to solve wastewater problem by implementing statistical tools on data of Karachi industrial state, obtained from EPA JICA and PCRWR, Islamabad. (author)

ECONOMIC AND THEORETICAL ASPECTS OF PLANNING EFFECTIVE ACTIVITY OF ENTERPRISES IN THE COAL INDUSTRIES

Directory of Open Access Journals (Sweden)

Zh. K. Galiev

2018-03-01

Full Text Available Relevance and purpose of the study. Under modern conditions, the share of loss-making enterprises of the coal industry is still high. This brings the solution of the problem of improving the efficiency of their activities up to date. It also determines the purpose of this research. Research methods: scientific generalization, system and factor analysis, and statistical modeling are used in the present work. Results. The article discusses the economic and theoretical aspects of planning the effective activities in the coal industry. The paper analyzes the elasticity of the unit cost price in terms of its labor productivity. It also deals with the elasticity of the volume of output in terms of labor productivity. This indicates that the existing coal mining technologies have, to some extent, exhausted their advantages in the coal industry. They require a change on the achieved level of the capital-labor ratio. It is recommended to strive to ensure advanced ratio of growth of labor productivity of workers compared to the growth rate of unit costs. This should be done at the introduction of a new technology at the enterprises of the coal industry. The advanced ratio of growth in output compared to the growth rate of labor productivity of workers should also be guaranteed. The early growth rate of revenue from sales compared to the growth rate in total costs of production should be provided. The advanced ratio of profit growth compared to the growth rate of revenue from sales has to be provided as well. It is proven that for coal industry enterprises the type of competitive advantages called “the lowest costs” can be the only acceptable one in comparison with other types. We have considered the requirements to the new developed technologies for coal mining. They are as follows: the value of marginal profit in the planned period should be more than the fixed costs of the enterprise; the value of marginal profit in the planned period should be more

An Improved Ant Colony Algorithm for Solving the Path Planning Problem of the Omnidirectional Mobile Vehicle

Directory of Open Access Journals (Sweden)

Jiang Zhao

2016-01-01

Full Text Available This paper presents an improved ant colony algorithm for the path planning of the omnidirectional mobile vehicle. The purpose of the improved ant colony algorithm is to design an appropriate route to connect the starting point and ending point of the environment with obstacles. Ant colony algorithm, which is used to solve the path planning problem, is improved according to the characteristics of the omnidirectional mobile vehicle. And in the improved algorithm, the nonuniform distribution of the initial pheromone and the selection strategy with direction play a very positive role in the path search. The coverage and updating strategy of pheromone is introduced to avoid repeated search reducing the effect of the number of ants on the performance of the algorithm. In addition, the pheromone evaporation coefficient is segmented and adjusted, which can effectively balance the convergence speed and search ability. Finally, this paper provides a theoretical basis for the improved ant colony algorithm by strict mathematical derivation, and some numerical simulations are also given to illustrate the effectiveness of the theoretical results.

76 FR 14025 - Guidance for Industry on Planning for the Effects of High Absenteeism To Ensure Availability of...

Science.gov (United States)

2011-03-15

...] Guidance for Industry on Planning for the Effects of High Absenteeism To Ensure Availability of Medically... entitled ``Planning for the Effects of High Absenteeism to Ensure Availability of Medically Necessary Drug... components to develop production plans in the event of an emergency that results in high absenteeism at one...

SIMULATION OF STRATEGIC SOLUTIONS ON FINANCIAL AND ECONOMIC PROVISION OF RUSSIAN DEFENCE INDUSTRY COMPLEX ENTERPRISES

Directory of Open Access Journals (Sweden)

K. B. Dobrova

2011-01-01

Full Text Available Creation of tools making it possible to efficiently control financial and production capability of industrial corporations making part of the Russian military-industrial complex are discussed for aviation enterprises as an example. A system of balanced indicators is proposed to be used to develop corporation’s adaptive management strategies. The enterprise production activity financial optimization task is solved on the basis of specific cost optimization criteria by means of linear programming. Economic mathematical models are proposed to optimize the scopes andtime terms of financing to be attracted over the planning intervals.

A modularized framework for sales and operations planning with focus on process industries

Directory of Open Access Journals (Sweden)

Sayeh Noroozi

2016-01-01

Full Text Available This paper suggests a modularized sales and operations planning (S&OP framework, consisting of content and process. The framework’s content is based on a typology of decoupling points in which the effect of decoupling points on the decision variables in S&OP is studied. The framework’s process takes a step back and addresses the need for a more elaborate design to precede the operational use of S&OP content for different production contexts. The framework supports both process industries (PIs and discrete manufacturing industries (DIs, and recognizes their specific requirements and reflects them in their S&OP. The differentiating characteristics of PIs and DIs are emphasized through three different decoupling points, namely: discretization decoupling point, control mode decoupling point, and customer order decoupling point. The suggested framework aims to fill the gap in the literature regarding the lack of aggregate planning processes that match the PIs’ specific requirements by reflecting the differentiating characteristics of PIs in S&OP.

Research Utilizing Problem Solving (RUPS) - Classroom Version. Description of Teacher Inservice Education Materials.

Science.gov (United States)

National Education Association, Washington, DC. Project on Utilization of Inservice Education R & D Outcomes.

The workshop instructional materials described here are designed to try out a systematic problem solving process as a way of working toward improvements in the school setting. Topics include diagnosis using force field technique, small group dynamics, planning for action, and planning a RUPS (Research Using Problem Solving) project. This…

A knowledge discovery in databases approach for industrial microgrid planning

DEFF Research Database (Denmark)

Gamarra, Carlos; Guerrero, Josep M.; Montero, Eduardo

2016-01-01

The progressive application of Information and Communication Technologies to industrial processes has increased the amount of data gathered by manufacturing companies during last decades. Nowadays some standardized management systems, such as ISO 50.001 and ISO 14.001, exploit these data in order...... sustainable and proactive microgrid which allows identifying, designing and developing energy efficiency strategies at supply, management and energy use levels. In this context, the expansion of Internet of Things and Knowledge Discovery in Databases techniques will drive changes in current microgrid planning...

Two pricing methods for solving an integrated commercial fishery ...

African Journals Online (AJOL)

In this paper, we develop two novel pricing methods for solving an integer program. We demonstrate the methods by solving an integrated commercial fishery planning model (IFPM). In this problem, a fishery manager must schedule fishing trawlers (determine when and where the trawlers should go fishing, and when the ...

76 FR 5231 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 23 to the...

Science.gov (United States)

2011-01-28

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of...

Metacognitive experience of mathematics education students in open start problem solving based on intrapersonal intelligence

Science.gov (United States)

Sari, D. P.; Usodo, B.; Subanti, S.

2018-04-01

This research aims to describe metacognitive experience of mathematics education students with strong, average, and weak intrapersonal intelligence in open start problem solving. Type of this research was qualitative research. The research subject was mathematics education students in Muhammadiyah University of Surakarta in academic year 2017/2018. The selected students consisted of 6 students with details of two students in each intrapersonal intelligence category. The research instruments were questionnaire, open start problem solving task, and interview guidelines. Data validity used time triangulation. Data analyses were done through data collection, data reduction, data presentation, and drawing conclusion. Based on findings, subjects with strong intrapersonal intelligence had high self confidence that they were able to solve problem correctly, able to do planning steps and able to solve the problem appropriately. Subjects with average intrapersonal intelligence had high self-assessment that they were able to solve the problem, able to do planning steps appropriately but they had not maximized in carrying out the plan so that it resulted incorrectness answer. Subjects with weak intrapersonal intelligence had high self confidence in capability of solving math problem, lack of precision in taking plans so their task results incorrectness answer.

Using Everyday Materials To Promote Problem Solving in Toddlers.

Science.gov (United States)

Segatti, Laura; Brown-DuPaul, Judy; Keyes, Tracy L.

2003-01-01

Outlines benefits of and skills involved in problem solving. Details how an environment rich in materials that foster cause-and-effect or trial-and-error explorations promote cognitive development among toddlers. Offers examples of problem-solving experiences and lists materials for use in curriculum planning. Describes the teacher' role as one of…

The Role of Problem Solving in Construction Management Practices

DEFF Research Database (Denmark)

Schultz, Casper Siebken

2012-01-01

industry. An Industrial PhD carried out at a large Danish contractor examined how failures and defects are produced and handled in the social practices of construction projects. The study addresses quality issues related to project management and examines the role of problem solving practices......Quality issues are a topic of continuous interest in the Danish construction industry. Not only can failures and defects be vital to the success of the single project but also the annual profits of the whole company can be put at risk. Moreover quality issues jeopardize the reputation of the entire......-dispositions regarding quality issues in the decision making and redressing of defects and failures in the processes. The role of problem solving and trouble-shooting is analysed through the well-organized processes of erecting the precast concrete structure and the chaotic processes of constructing the penthouse storey...

Intrafirm planning and mathematical modeling of owner's equity in industrial enterprises

Science.gov (United States)

Ponomareva, S. V.; Zheleznova, I. V.

2018-05-01

The article aims to review the different approaches to intrafirm planning of owner's equity in industrial enterprises. Since charter capital, additional capital and reserve capital do not change in the process of enterprise activity, the main interest lies on the field of share repurchases from shareholders and retained earnings within the owner's equity of the enterprise. In order to study the effect of share repurchases on the activities of the enterprise, let us use such mathematical methods as event study and econometric modeling. This article describes the step-by-step algorithm of carrying out event study and justifies the choice of Logit model in econometric analysis. The article represents basic results of conducted regression analysis on the effect of share repurchases on the key financial indicators in industrial enterprises.

The Investigation of the Effects of Physical Education Lessons Planned in Accordance with Cooperative Learning Approach on Secondary School Students' Problem Solving Skills

Science.gov (United States)

Gorucu, Alpaslan

2016-01-01

The purpose of the present research was to investigate the effects of physical education lessons planned in accordance with cooperative learning approach on secondary school students' problem solving skills. The research was conducted on 48 students studying at Konya/Selçuklu Sehit Mustafa Çuhadar Secondary School in fall semester of 2015-2016…

Planning for Biogas Plant in Denmark

DEFF Research Database (Denmark)

Landt, Cristina C.; Gaarsmand, Regin; Palsberg, Aske

2016-01-01

This article is about establishing biogas in Denmark in the region of Zealand, the challenges that are related to this establishment and how to overcome this challenges. The article highlights three reasons for these challenges: 1) Regulation, 2) The municipal planning and 3) Involved various...... stakeholders. It investigates how these challenges affected the process and were overcome in the establishment of Solrod Biogas. In terms of ownership and biomass input, this biogas plant is unique compared to other Danish biogas plants. The biogas plant is based on organic by-products from local industries...... and seaweed. The plant solves an essential environmental issue for the municipality and citizens who were affected by the smell of rotten seaweed washed up in Koge Bay. The seaweed is used as input; this solves several problems at the same time. The method used to establish Solrod Biogas was an integrated...

Profit Analysis and Supply Chain Planning Model for Closed-Loop Supply Chain in Fashion Industry

Directory of Open Access Journals (Sweden)

Jisoo Oh

2014-12-01

Full Text Available In recent decades, due to market growth and use of synthetic fiber, the fashion industry faces a rapid increase of CO2 emission throughout the production cycle and raises environmental issues in recovery processing. This study proposes a closed-loop supply chain (CLSC structure in fashion industry and develops its planning model as multi-objective mixed integer linear programming to find an optimal trade-off between CLSC profit and CO2 emission. The planning model is associated with the profit analysis of each member in CLSC to find the optimal price of products on CLSC network. The model determines optimal production, transportation, and inventory quantities on CLSC network. The proposed models are validated using numerical experiments and sensitivity analyses, and from the results some managerial insights are addressed.

A Problem-Solving Model for Literacy Coaching Practice

Science.gov (United States)

Toll, Cathy A.

2017-01-01

Literacy coaches are more effective when they have a clear plan for their collaborations with teachers. This article provides details of such a plan, which involves identifying a problem, understanding the problem, deciding what to do differently, and trying something different. For each phase of the problem-solving model, there are key tasks for…

Solving process industry problems with specialty stainlesses

International Nuclear Information System (INIS)

Montrone, E.D.

1977-01-01

Substantial steel industry efforts have been devoted to improving the properties of stainless steels by changing the level of alloying elements. Rapid progress has produced materials to meet many of the diversified service conditions existing in process plants. The performance characteristics of seven stainless steels are compared. The emphasis is on steels which avoid the effects of corrosion. 4 figures, 3 tables

Environmental impact assessment of the industrial estate development plan with the geographical information system and matrix methods.

Science.gov (United States)

Ghasemian, Mohammad; Poursafa, Parinaz; Amin, Mohammad Mehdi; Ziarati, Mohammad; Ghoddousi, Hamid; Momeni, Seyyed Alireza; Rezaei, Amir Hossein

2012-01-01

The purpose of this study is environmental impact assessment of the industrial estate development planning. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. The net score for impact of industrial units operation on air quality of the project area was (-3). According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (-2). Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37). Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application.

Conceptual problem solving in high school physics

Science.gov (United States)

Docktor, Jennifer L.; Strand, Natalie E.; Mestre, José P.; Ross, Brian H.

2015-12-01

Problem solving is a critical element of learning physics. However, traditional instruction often emphasizes the quantitative aspects of problem solving such as equations and mathematical procedures rather than qualitative analysis for selecting appropriate concepts and principles. This study describes the development and evaluation of an instructional approach called Conceptual Problem Solving (CPS) which guides students to identify principles, justify their use, and plan their solution in writing before solving a problem. The CPS approach was implemented by high school physics teachers at three schools for major theorems and conservation laws in mechanics and CPS-taught classes were compared to control classes taught using traditional problem solving methods. Information about the teachers' implementation of the approach was gathered from classroom observations and interviews, and the effectiveness of the approach was evaluated from a series of written assessments. Results indicated that teachers found CPS easy to integrate into their curricula, students engaged in classroom discussions and produced problem solutions of a higher quality than before, and students scored higher on conceptual and problem solving measures.

Conceptual problem solving in high school physics

Directory of Open Access Journals (Sweden)

Jennifer L. Docktor

2015-09-01

Full Text Available Problem solving is a critical element of learning physics. However, traditional instruction often emphasizes the quantitative aspects of problem solving such as equations and mathematical procedures rather than qualitative analysis for selecting appropriate concepts and principles. This study describes the development and evaluation of an instructional approach called Conceptual Problem Solving (CPS which guides students to identify principles, justify their use, and plan their solution in writing before solving a problem. The CPS approach was implemented by high school physics teachers at three schools for major theorems and conservation laws in mechanics and CPS-taught classes were compared to control classes taught using traditional problem solving methods. Information about the teachers’ implementation of the approach was gathered from classroom observations and interviews, and the effectiveness of the approach was evaluated from a series of written assessments. Results indicated that teachers found CPS easy to integrate into their curricula, students engaged in classroom discussions and produced problem solutions of a higher quality than before, and students scored higher on conceptual and problem solving measures.

Application of the PDCA Problem-Solving Method in treatment of wastewater from poultry processing

Directory of Open Access Journals (Sweden)

Yovanka Pérez Ginoris

2011-12-01

Full Text Available Amongst the technologies developed for the treatment of industrial waste-water, activated sludge systems deserve special mention. The aim of the present work was to explore the use of PDCA management methods for identifying problems in a system for the biological treatment of effluent from a poultry processing plant and to evaluate the priority solutions adopted or proposed for solving them. To accomplish this objective the following steps are required: analysis of inputs and outputs of the effluent treatment process; identification of operational problems in the system based on the use of performance measures; and identification of fundamental causes leading to problems. Four steps in the PDCA cycle were followed: planning, execution, verification, and corrective action. At the planning stage, the problem was identified by analysis of the historic Sludge Volume Index (SVI record, which gave values of about 500 mL/g in the first half of 2010. Analysis of the phenomenon was achieved by monitoring physical, chemical and biological parameters to give a picture of how the system for waste-water treatment actually worked. The survey of fundamental causes used procedures of brainstorming, Ishakawa diagrams, and prioritization. The results suggest that after partial implantation of the proposed action plan, the problem of sludge sedimentation shown by the SVI was much reduced, its value decreased from about 500 mL/g to about 250 mL/g in the second half of 2010. It is therefore concluded that the PDCA methodology is adequate for solving problems in effluent treatment plants.

The Action Plan Against Repetitive Work - An Industrial Relation Strategy for Improving the Working Environment

DEFF Research Database (Denmark)

Hasle, Peter; Møller, Niels

2001-01-01

The Danish Action Plan against Repetitive Work is presented and discussed as a possible new strategy for regulating repetitive work as well as other complicated working environment problems. The article is based on an empirical evaluation ot the Action Plan. The asseessment of the Action Plan...... indicates that a measurable reduction of repetitive work has been achieved, while recognizing the the new management strategies focusing on human resources development have also played an important role. These results are used to suggest that - under certain conditions - a combination of state regulation...... and industrial relation agreements can be used to regulate other working environment problems....

Decision Model for Planning and Scheduling of Seafood Product Considering Traceability

Science.gov (United States)

Agustin; Mawengkang, Herman; Mathelinea, Devy

2018-01-01

Due to the global challenges, it is necessary for an industrial company to integrate production scheduling and distribution planning, in order to be more efficient and to get more economics advantages. This paper presents seafood production planning and scheduling of a seafood manufacture company which produces simultaneously multi kind of seafood products, located at Aceh Province, Indonesia. The perishability nature of fish highly restricts its storage duration and delivery conditions. Traceability is a tracking requirement to check whether the quality of the product is satisfied. The production and distribution planning problem aims to meet customer demand subject to traceability of the seafood product and other restrictions. The problem is modeled as a mixed integer linear program, and then it is solved using neighborhood search approach.

Student’s scheme in solving mathematics problems

Science.gov (United States)

Setyaningsih, Nining; Juniati, Dwi; Suwarsono

2018-03-01

The purpose of this study was to investigate students’ scheme in solving mathematics problems. Scheme are data structures for representing the concepts stored in memory. In this study, we used it in solving mathematics problems, especially ratio and proportion topics. Scheme is related to problem solving that assumes that a system is developed in the human mind by acquiring a structure in which problem solving procedures are integrated with some concepts. The data were collected by interview and students’ written works. The results of this study revealed are students’ scheme in solving the problem of ratio and proportion as follows: (1) the content scheme, where students can describe the selected components of the problem according to their prior knowledge, (2) the formal scheme, where students can explain in construct a mental model based on components that have been selected from the problem and can use existing schemes to build planning steps, create something that will be used to solve problems and (3) the language scheme, where students can identify terms, or symbols of the components of the problem.Therefore, by using the different strategies to solve the problems, the students’ scheme in solving the ratio and proportion problems will also differ.

Contextualized teaching on the problem solving performance of students

Directory of Open Access Journals (Sweden)

Rolando V. Obiedo

2017-12-01

Full Text Available This study investigated the effect of contextualized teaching on students’ problem solving skills in physics through a quasi-experimental approach. Problem solving performance of students was described quantitatively through their mean problem solving scores and problem solving skills level. A unit plan patterned from the cognitive apprenticeship approach and contextualized using maritime context of ship stability was implemented on the experimental group while the control group had the conventional lecture method. Pre and post assessment, which is a researcher-developed word problem assessment, was administered to both groups. Results indicated increased problem solving mean scores (p < 0.001, problem solving skill level (p < 0.001 of the experimental group while the control group increased only their problem solving skill level (p = 0.008. Thus, contextualized teaching can improve the problem solving performance of students. This study recommends using contextualization using other physics topics where other contexts can be applied.

The art and science of problem solving

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui

2005-01-01

In this paper we will document that real-life problem solving in complex situations demands both rational (scientific) and intuitive (artistic) thinking. First, the concepts of art and science will be discussed; differences and similarities will be enhanced. Thereafter the concept of group problem...... solving facilitation both as science and art will be presented. A case study related to examination's planning will be discussed to illustrate the main concepts in practice. In addition, other cases studies will also be shortly presented....

U.S. Btu tax plan revised; industry wary of results

International Nuclear Information System (INIS)

Crow, P.

1993-01-01

The Clinton administration has changed its U.S. energy tax proposal to remove some objection voiced by industry and consumers. The Treasury Department's revised plan will still tax oil products at double the rate of other types of energy except for home heating oil, which now is to be taxed at the lower rate for natural gas. Of major importance to California producers, the revision will not tax natural gas used in enhanced recovery for heavy oil. This paper describes exemptions; effects on natural gas; the credibility gap; inhibition of gas market recovery; tax on NGL; and forecasting the future

Appreciative Problem Solving

DEFF Research Database (Denmark)

Hansen, David

2012-01-01

Many industrial production work systems have increased in complexity, and their new business model scompete on innovation, rather than low cost.At a medical device production facility committed to Lean Production, a research project was carried out to use Appreciative Inquiry to better engage...... employee strengths in continuou simprovements of the work system. The research question was: “How can Lean problem solving and Appreciative Inquiry be combined for optimized work system innovation?” The research project was carried out as a co-creation process with close cooperation between researcher...

Comprehensive Planning for Classification and Disposal of Solid Waste at the Industrial Parks regarding Health and Environmental Impacts

OpenAIRE

Hashemi, Hassan; Pourzamani, Hamidreza; Rahmani Samani, Bahareh

2014-01-01

The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without o...

THE PROGRAM-TARGET PLANNING AND MANAGEMENT OF DEVELOPMENT OF MEASURING EQUIPMENT PARK

Directory of Open Access Journals (Sweden)

Marichev Pavel Aleksandrovich

2018-02-01

Full Text Available Subject: study of the Park of Measuring Equipment (PME that includes hundreds of thousands of standard samples, measuring instruments, control and measuring devices and other measuring mechanisms with different areas of application, levels of reliability, service life, levels of technical perfection and levels of technical condition. Research objectives: 1. Development of a complex of mathematical models to simulate the processes of development of PME, control indicators of PME performance as a whole, purposefully control the stages of life cycle of measuring equipment samples. 2. Development of the method which, with a sufficient degree of validity and objectivity, would solve the tasks of management of procurement and repairs both in preparation of proposals for preliminary long-term plan documents (LTPD and to ensure control over the implementation of adopted plans. Thus, the method being developed should be fairly simple to use, easily adjustable for solving problems of different dimensions, suitable for solving the optimal control problem for PME as a whole, for a part of PME, and also suitable for solving a generalized problem for certain “aggregated objects” such as the Metrology Centers. Materials and methods: the methods of mathematical simulation, methods of comparative analysis, simplex method for solving linear programming problem, methods of program-target planning were used. Results: an approach to the solution of problems of program-target planning based on solving a series of linear programming problems has been developed. The results have been presented of using the approach both for formulation of proposals into the preliminary LTPD and also for introducing revisions (amendments to annual plans, which are implemented in the framework of the state defense order. Conclusions: the described method and algorithms constitute an effective tool for solving practical problems of target-oriented management of PME performance

Expansion planning of the electric systems in a competitive environment context; O planejamento da expansao dos sistemas eletricos no contexto de um ambiente competitivo

Energy Technology Data Exchange (ETDEWEB)

Haffner, Sergio Luis

2000-07-01

An integrated dynamic expansion planning model of electric energy systems model is proposed. Such model can be used by an independent structure of planning, compatible with the current competitive environment of the electric industry. The investments in generation and transmission are obtained simultaneously, taking into account a long term planning horizon that is split in multiple stages. In the proposed model, the entity responsible for the expansion planning, the Independent Expansion Planner, divulges the indicative expansion plan and other information that will be used by the sector agents to guide its investments in that area. Three network models are used (transport, DC load flow and hybrid transport-DC) in an hierarchical algorithm that uses the Benders decomposition to solve the problem of capacity expansion, considering the investment and operation costs. The original problem is separated in a master subproblem (investment) and several slave subproblems (operation). Each stage is represented by an operation subproblem and the master subproblem is solved by an specialized branch-and-bound algorithm. The operation subproblems (LP problems) are solved through the MINOS package. Strategies to improve the performance of the described algorithm are discussed and presented. The efficiency of those strategies is shown through tests using theoretical and realistic electric systems. The developed branch-and-bound algorithm and the selection techniques employed are described in details and illustrated through examples. It is presented, also, the Independent Planner role and its relevance in the current context of the national electric industry is pointed out. (author)

An Approximation Approach for Solving the Subpath Planning Problem

OpenAIRE

Safilian, Masoud; Tashakkori, S. Mehdi; Eghbali, Sepehr; Safilian, Aliakbar

2016-01-01

The subpath planning problem is a branch of the path planning problem, which has widespread applications in automated manufacturing process as well as vehicle and robot navigation. This problem is to find the shortest path or tour subject for travelling a set of given subpaths. The current approaches for dealing with the subpath planning problem are all based on meta-heuristic approaches. It is well-known that meta-heuristic based approaches have several deficiencies. To address them, we prop...

Robust economic optimization and environmental policy analysis for microgrid planning: An application to Taichung Industrial Park, Taiwan

International Nuclear Information System (INIS)

Yu, Nan; Kang, Jin-Su; Chang, Chung-Chuan; Lee, Tai-Yong; Lee, Dong-Yup

2016-01-01

This study aims to provide economical and environmentally friendly solutions for a microgrid system with distributed energy resources in the design stage, considering multiple uncertainties during operation and conflicting interests among diverse microgrid stakeholders. For the purpose, we develop a multi-objective optimization model for robust microgrid planning, on the basis of an economic robustness measure, i.e. the worst-case cost among possible scenarios, to reduce the variability among scenario costs caused by uncertainties. The efficacy of the model is successfully demonstrated by applying it to Taichung Industrial Park in Taiwan, an industrial complex, where significant amount of greenhouse gases are emitted. Our findings show that the most robust solution, but the highest cost, mainly includes 45% (26.8 MW) of gas engine and 47% (28 MW) of photovoltaic panel with the highest system capacity (59 MW). Further analyses reveal the environmental benefits from the significant reduction of the expected annual CO_2 emission and carbon tax by about half of the current utility facilities in the region. In conclusion, the developed model provides an efficient decision-making tool for robust microgrid planning at the preliminary stage. - Highlights: • Developed robust economic and environmental optimization model for microgrid planning. • Provided Pareto optimal planning solutions for Taichung Industrial Park, Taiwan. • Suggested microgrid configuration with significant economic and environmental benefits. • Identified gas engine and photovoltaic panel as two promising energy sources.

Environmental Impact Assessment of the Industrial Estate Development Plan with the Geographical Information System and Matrix Methods

Science.gov (United States)

Ghasemian, Mohammad; Poursafa, Parinaz; Amin, Mohammad Mehdi; Ziarati, Mohammad; Ghoddousi, Hamid; Momeni, Seyyed Alireza; Rezaei, Amir Hossein

2012-01-01

Background. The purpose of this study is environmental impact assessment of the industrial estate development planning. Methods. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. Results. The net score for impact of industrial units operation on air quality of the project area was (−3). According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (−2). Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Conclusion. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37). Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application. PMID:22272210

Environmental Impact Assessment of the Industrial Estate Development Plan with the Geographical Information System and Matrix Methods

Directory of Open Access Journals (Sweden)

Mohammad Ghasemian

2012-01-01

Full Text Available Background. The purpose of this study is environmental impact assessment of the industrial estate development planning. Methods. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. Results. The net score for impact of industrial units operation on air quality of the project area was (−3. According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (−2. Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Conclusion. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37. Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application.

Environmental Impact Assessment of the Industrial Estate Development Plan with the Geographical Information System and Matrix Methods

International Nuclear Information System (INIS)

Ghasemian, M.; Poursafa, P.; Amin, O.M.; Rezaei, A.H.; Ziarati, M.; Ghoddousi, H.; Momeni, S.A.; Rezaei, A.H.

2012-01-01

Background. The purpose of this study is environmental impact assessment of the industrial estate development planning. Methods. This cross-sectional study was conducted in 2010 in Isfahan province, Iran. GIS and matrix methods were applied. Data analysis was done to identify the current situation of the region, zoning vulnerable areas, and scoping the region. Quantitative evaluation was done by using matrix of Wooten and Rau. Results. The net score for impact of industrial units operation on air quality of the project area was (-3). According to the transition of industrial estate pollutants, residential places located in the radius of 2500 meters of the city were expected to be affected more. The net score for impact of construction of industrial units on plant species of the project area was (-2). Environmental protected areas were not affected by the air and soil pollutants because of their distance from industrial estate. Conclusion. Positive effects of project activities outweigh the drawbacks and the sum scores allocated to the project activities on environmental factor was (+37). Totally it does not have detrimental effects on the environment and residential neighborhood. EIA should be considered as an anticipatory, participatory environmental management tool before determining a plan application

A GRASP algorithm for the container stowage slot planning problem

DEFF Research Database (Denmark)

Parreno, Francisco; Pacino, Dario; Alvarez-Valdes, Ramon

2016-01-01

in clusters along the vessel. For each of those clusters a specific position for each container must be found. Compared to previous studies, we have introduced two new features: the explicit handling of rolled out containers and the inclusion of separations rules for dangerous cargo. We present a novel......This work presents a generalization of the Slot Planning Problem which raises when the liner shipping industry needs to plan the placement of containers within a vessel (stowage planning). State-of-the-art stowage planning relies on a heuristic decomposition where containers are first distributed...... integer programming formulation and a Greedy Randomized Adaptive Search Procedure (GRASP) to solve the problem. The approach is able to find high-quality solution within 1 s. We also provide comparison with the state-of-the-art on an existing and a new set of benchmark instances. (C) 2016 Elsevier Ltd...

Condition-based maintenance for complex systems : Coordinating maintenance and logistics planning for the process industries

NARCIS (Netherlands)

Olde Keizer, Minou Catharina Anselma

2016-01-01

Maintenance planning in the process industries is extremely complex for various reasons. Plants often run nonstop, allowing little time for performing preventive maintenance. Failures should be prevented, however, as they can lead to system downtime and high losses of revenue. Corrective maintenance

Financial Planning with Fractional Goals

OpenAIRE

Goedhart, Marc; Spronk, Jaap

1995-01-01

textabstractWhen solving financial planning problems with multiple goals by means of multiple objective programming, the presence of fractional goals leads to technical difficulties. In this paper we present a straightforward interactive approach for solving such linear fractional programs with multiple goal variables. The approach is illustrated by means of an example in financial planning.

Conservación del Patrimonio Industrial. Un plan estratégico

OpenAIRE

Sentana Gadea, Irene; Tomás Jover, Roberto; Díaz Ivorra, María del Carmen; Elvira Cruañes, María Teresa

2002-01-01

Comunicación presentada en el Congreso de Patrimonio Industrial y de la Obra Pública e Historia de la Ingeniería, Las Palmas de Gran Canaria, 5-7 junio 2002 Se trata de mostrar el plan estratégico que se llevó a cabo para conservar el patrimonio constructivo de un edificio de carácter histórico que estuvo a punto de desaparecer, con el fin de mostrar las acciones que se emprendieron y los resultados conseguidos en el objetivo propuesto, su conservación.

Worry and problem-solving skills and beliefs in primary school children

OpenAIRE

Parkinson, Monika; Creswell, Catharine

2011-01-01

Objective. To examine the association between worry and problem-solving skills and beliefs (confidence and perceived control) in primary school children.\\ud Method. Children (8–11 years) were screened using the Penn State Worry Questionnaire for Children. High (N ¼ 27) and low (N ¼ 30) scorers completed measures of anxiety, problem-solving skills (generating alternative solutions to\\ud problems, planfulness, and effectiveness of solutions) and problem-solving beliefs(confidence and perceived ...

Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.

An efficient numerical technique for solving navier-stokes equations for rotating flows

International Nuclear Information System (INIS)

Haroon, T.; Shah, T.M.

2000-01-01

This paper simulates an industrial problem by solving compressible Navier-Stokes equations. The time-consuming tri-angularization process of a large-banded matrix, performed by memory economical Frontal Technique. This scheme successfully reduces the time for I/O operations even for as large as (40, 000 x 40, 000) matrix. Previously, this industrial problem can solved by using modified Newton's method with Gaussian elimination technique for the large matrix. In the present paper, the proposed Frontal Technique is successfully used, together with Newton's method, to solve compressible Navier-Stokes equations for rotating cylinders. By using the Frontal Technique, the method gives the solution within reasonably acceptance computational time. Results are compared with the earlier works done, and found computationally very efficient. Some features of the solution are reported here for the rotating machines. (author)

Students’ Relational Understanding in Quadrilateral Problem Solving Based on Adversity Quotient

Science.gov (United States)

Safitri, A. N.; Juniati, D.; Masriyah

2018-01-01

The type of research is qualitative approach which aims to describe how students’ relational understanding of solving mathematic problem that was seen from Adversity Quotient aspect. Research subjects were three 7th grade students of Junior High School. They were taken by category of Adversity Quotient (AQ) such quitter, camper, and climber. Data collected based on problem solving and interview. The research result showed that (1) at the stage of understanding the problem, the subjects were able to state and write down what is known and asked, and able to mention the concepts associated with the quadrilateral problem. (2) The three subjects devise a plan by linking concepts relating to quadrilateral problems. (3) The three subjects were able to solve the problem. (4) The three subjects were able to look back the answers. The three subjects were able to understand the problem, devise a plan, carry out the plan and look back. However, the quitter and camper subjects have not been able to give a reason for the steps they have taken.

Integrated planning for regional development planning and water resources management under uncertainty: A case study of Xining, China

Science.gov (United States)

Fu, Z. H.; Zhao, H. J.; Wang, H.; Lu, W. T.; Wang, J.; Guo, H. C.

2017-11-01

Economic restructuring, water resources management, population planning and environmental protection are subjects to inner uncertainties of a compound system with objectives which are competitive alternatives. Optimization model and water quality model are usually used to solve problems in a certain aspect. To overcome the uncertainty and coupling in reginal planning management, an interval fuzzy program combined with water quality model for regional planning and management has been developed to obtain the absolutely ;optimal; solution in this study. The model is a hybrid methodology of interval parameter programming (IPP), fuzzy programing (FP), and a general one-dimensional water quality model. The method extends on the traditional interval parameter fuzzy programming method by integrating water quality model into the optimization framework. Meanwhile, as an abstract concept, water resources carrying capacity has been transformed into specific and calculable index. Besides, unlike many of the past studies about water resource management, population as a significant factor has been considered. The results suggested that the methodology was applicable for reflecting the complexities of the regional planning and management systems within the planning period. The government policy makers could establish effective industrial structure, water resources utilization patterns and population planning, and to better understand the tradeoffs among economic, water resources, population and environmental objectives.

SOME SIMPLE APPROACHES TO PLANNING THE INVENTORY OF SPARE COMPONENTS OF AN INDUSTRIAL SYSTEM

Directory of Open Access Journals (Sweden)

Alenka Brezavšek

2016-02-01

Full Text Available Two variants of a simple stochastic model for planning the inventory of spare components supporting maintenance of an industrial system are developed. In both variants, the aim is to determine how many spare components are needed at the beginning of a planning interval to fulfil demand for corrective replacements during this interval. Under the first variant, the acceptable probability of spare shortage during the planning interval is chosen as a decision variable while in the second variant, the adequate spare inventory level is assessed taking into account the expected number of component failures within the planning interval. Calculation of the number of spare components needed depends on the form of the probability density function of component failure times. Different statistical density functions that are useful to describe this function are presented. Advantages and disadvantages of using a particular density function in our model are discussed. The applicability of the model is given through illustrative numerical examples.

IMPROVING THE QUALITY OF INVESTMENT DESIGN IN INDUSTRIAL CONSTRUCTION

Directory of Open Access Journals (Sweden)

I. M. Meylanov

2017-01-01

Full Text Available Objectives. The development of a set of practical measures in order to improve the quality of investment design in industrial construction.Methods. The basis of research comprises a project management methodology as well as methods for logical and statistical analysis of decisionmaking in investment activities.Results. A mechanism of inclusion of industrial construction objects into the Federal targeted investment programme is revealed. The sequence of the state expert evaluation of investment projects is determined, which optimises the design solutions aimed at minimising their estimated cost if the investment is made with the involvement of the Federal budget. Qualitative and quantitative criteria are systematised for the integrated assessment of the effectiveness of investment fund usage sent to industrial construction objects.Conclusion. The consistent implementation of the state investment policy is aimed at developing the scientific-technological and scientific-industrial potential of industrial construction by providing favourable conditions for effective innovation activity, selecting rational investment strategies and priority projects aimed at solving urgent problems of improving the competitiveness of construction. Successful implementation of the state investment policy in industrial construction largely depends on the effectiveness of investment design, starting from the accuracy of the formulation of the investment plan (idea, in which the interests of all participants in investment activities are concentrated and taken into account, and to the development of an agreed set of actions to complete the project. A unified register covering the data on the cost and results of investment projects is proposed to be created with the purpose of facilitating decision-making in the process of allocation of the Federal budget funds, planning of state capital investments and approval of project documentation for new industrial construction

4th CIRP International Conference on Industrial Product-Service Systems

CERN Document Server

Kimita, Koji

2013-01-01

Industrial Product-Service Systems (IPS2), which is defined as “an integrated industrial product and service offering that delivers value in use,” has expanded rapidly over the last decade. IPS2 has allowed us to achieve both high added value and high productivity and has enriched our QOL by improving the performance of products and services. We are now struggling with many awkward issues related to sustainability, but IPS2 is expected to be the “philosopher’s stone” for solving these issues. Following the pattern of conferences held in Cranfield in 2009, Linköping in 2010, and Braunschweig in 2011, the fourth International CIRP Conference on Industrial Product-Service Systems, held on November 8-9, 2012, in Tokyo, will cover various aspects of IPS2. Topics planned for this year’s conference reflect the latest IPS2 information in both the natural sciences and humanities and include case studies from various industries. IPS2 is still a relatively new field, so it is important to keep track of the ...

The art and science of participative problem solving

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui

In this paper we will document that real-life problem solving in complex situations demands both rational (scientific) and intuitive (artistic) thinking. First, the concepts of art and science will be discussed; differences and similarities will be enhanced. Thereafter the concept of group problem...... solving facilitation both as science and art will be presented. A case study related to examinations planning will be discussed to illustrate the main concepts in practice. In addition, other cases studies will also be shortly presented....

Comparison of problem solving tools in lean organizations

Directory of Open Access Journals (Sweden)

Iuga Maria Virginia

2017-01-01

Full Text Available As global market competition is getting fiercer, and companies are looking at ways to stay on top, more and more organizations are looking at Lean Manufacturing and lean tools to support them in achieving their goals. Especially within the automotive industry, lean practices are very well received. The speed at which the automotive industry is evolving, especially but not only, in countries like Romania, leads to the need to carefully analyze lean manufacturing concepts, examine them against local production conditions, and to develop and standardize them. One of the most important things to take into consideration here is the application of an adequate problem solving technique to avoid waste. The objective of this research paper lies in analyzing and comparing the problem-solving methods recommended by the Toyota Production System, and to propose their appropriate application at shop floor, in relation to the specific problem type.

Information strategy on major industrial risks in the department of Bouches-du-Rhone

International Nuclear Information System (INIS)

Lalo, Anne P.

1989-01-01

The accidents which took place lately in the industry, and their sometimes dramatic consequences for neighbouring populations (in Seveso, Mexico City, Bhopal, Chernobyl), show that the solving of industrial safety problems obviously goes beyond specialized technical language, and implies a calling up of the whole community. As early as 1976 French legislation took this into account since the control of classified plants requires a public inquiry including a danger study. The 'Seveso' European Clause is a reminder of this principle, as its Article 8 emphasizes the necessity of an information of the public and the staff of plants, following danger studies, and after the working out of Internal Operation Plans (Plans d'Operation Internes, P.O.I.) and Special Intervention Plans (Plans Particuliers d'Intervention, P.P.I.). In France, with its 40 establishments out of 330 plants concerned by the Seveso Clause, the Provence-Alpes-Cote d'Azur region ranks second after Haute-Normandie among French regions. Most of these plants (33 out of 40) are concentrated in the industrial zone of Fos-sur-Mer in the departement of Bouches-du-Rhone. According to the clauses of Article 21 of the Act of July 22, 1987, and Article 9 of the Executive Order of May 6, 1988, the Prefect must make out brochures giving the instructions for the population living in the enforcement zone of the intervention plans. In November 1988 the Provence-Alpes-Cote d'Azur region will launch a large information campaign on the subject. In order to determine the intervention stragegy of this campaign an inquiry was conducted by the IUT2 (Grenoble) and we give its main conclusions. This study aims at evaluating the sensitivity of the public regarding industrial risks and their confidence towards the management of the risks

A need for planned adaptation to climate change in the wine industry

Science.gov (United States)

Metzger, Marc J.; Rounsevell, Mark D. A.

2011-09-01

The diversity of wine production depends on subtle differences in microclimate and is therefore especially sensitive to climate change. A warmer climate will impact directly on wine-grapes through over-ripening, drying out, rising acidity levels, and greater vulnerability to pests and disease, resulting in changes in wine quality (e.g. complexity, balance and structure) or potentially the style of wine that can be produced. The growing scientific evidence for significant climate change in the coming decades means that adaptation will be of critical importance to the multi-billion dollar global wine-industry in general, and to quality wine producers in particular (White et al 2006, 2009; Hertsgaard 2011). Adaptation is understood as an adjustment in natural or human systems in response to actual or expected environmental change, which moderates harm or exploits beneficial opportunities (IPCC 2007). Autonomous adaptation has been an integral part of the 20th century wine industry. Technological advances, changes in consumer demand, and global competition have meant that growers and producers have had to adapt to stay in business. The gradual temperature rise in the 20th Century (0.7 °C globally) has been accommodated successfully by gradual changes in vine management, technological measures, production control, and marketing (White et al 2009), although this has in many cases resulted in the production of bolder, more alcoholic wines (Hertsgaard 2011). In spite of this success, the wine industry is surprisingly conservative when it comes to considering longer term planned adaptation for substantial climate change impacts. A few producers are expanding to new locations at higher altitudes or cooler climates (e.g. Torres is developing new vineyards high in the Pyrenees, and Mouton Rothschild is setting up new vineyards in South America), and the legal and cultural restrictions of Appelation d'Origine Cȏntrollée (AOC) systems are being discussed (White et al 2009

Utah ITS/CVO business plan : using technology to maximize highway safety and improve government and industry productivity

Science.gov (United States)

1997-12-31

This plan was produced to maximize highway safety and increase government and industry productivity through the application of Intelligent Transportation System/Commercial Vehicle Operations (ITS/CVO) technologies to support regulatory and enforcemen...

Guide to hazardous industrial activities: handbook for the cataloguing and selection of industrial activities for which an Emergency Management Plan ought to be drafted

NARCIS (Netherlands)

Ham, J.M.; Blom-Bruggeman, J.M.

1989-01-01

A methodology has been developed for the cataloguing of hazardous (industrial) activities and the evaluation of these activities as part of the process of formulating an emergency management plan. This guide will enable priorities to be set at local level (district, region) for the drafting of

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

Science.gov (United States)

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

Supply Network Planning for New Product Market Entry in the Pharmaceutical Industry

DEFF Research Database (Denmark)

Hansen, Klaus Reinholdt Nyhuus; Grunow, Martin

2011-01-01

uncertainty and the risk of a forced label change and includes solution robustness. While considering limited shelf life of the drug, the supply of packaging material and outsourcing, the objective of our model is to reduce supply chain cost including lost peak sales from delayed market entry....... planning before and during the market entry of the drug after the drug has been approved. Production of the active pharmaceutical ingredient [API] is characterized by long change-over times due to cleaning requirements. Production planning is long term, multiple batches of each drug are produced...... industry, reimbursement negotiations have to be carried out before a drug can be marketed. These negotiations both necessitate time phasing market entries and introduce a series of uncertainties e.g. varying allowed price and awarded subsidy. Also if the label is not approved for marketing, all packaged...

MAP SUPPORT FOR ENVIRONMENTAL PLANNING OF A MEDIUM-SIZE INDUSTRIAL CITY

Directory of Open Access Journals (Sweden)

L. A. Matyushkina

2016-01-01

Full Text Available The paper presents a set of thematic maps reflecting the current geo-ecological urban area conditions of Birobidzhan, an administrative and industrial center of the Jewish Autonomous Oblast. The maps shows landscape-functional complexes of the city; main types of natural and anthropogenic soils; urban area zoning by the degree of disturbance of soil ecological functions; levels of contamination of soils, dendroflora and snow with heavy metals. Component-based maps help improving environmental urban planning including ecological and functional city zoning and designing the ecological carcass with all its structural elements.

Review on Application of Building Information Modelling in Interior Design Industry

Directory of Open Access Journals (Sweden)

Abd Hamid Abu Bakar

2016-01-01

Full Text Available Building Information Modeling (BIM is a flourishing device and approach for Architecture, Engineering and Construction (AEC which assist; the planning, design, constructions and operation with particular to commence the designing in several components of the building, a comprehensive understanding of the activities and needed in all aspects. An aspect of activities and needs is the first step to be analysed in the design and it is the responsibility of professionals’ interior designers. To solve the problems, is required to attach with the certain factors such as space planning, specifications fixture, equipment and material, furniture and finishing, lighting fixing and service management. BIM application can provide interior designers such as simulation, analysis, design process and solution with team members. Furthermore, some of the interior designer also using BIM as to organize, documenting data and optimise detail information in solving the problem in the develop process. BIM technology and practices not only to improve the construction and design process development that only the project faster, cost effectively, and prolong but it also helps to increase the capacity of BIM professional by improvise the careers and fields. In the Malaysian context, BIM is still fresh in interior desogn industry.

Planning Mechanisms for Regional Electric Power Supply System Development

Directory of Open Access Journals (Sweden)

Evgeniy Anatolyevich Malyshev

2015-12-01

Full Text Available Key problems of the regional electric power supply systems are examined. These problems result from a lack of regulated interaction mechanisms for uniting the different entities’ resources aimed at the realization of investment activities. One of the main problems of the power supply industry is physical and moral aging of both generating and networking equipment. In the article, the necessity of management system formation to control the development of power sector has been proved. The deficiencies of the modern investment procedure in power companies are described. The absence of continuity between the regional and local strategic planning documents and investment planning of a power company has been found out. The possibility to develop a new mechanism for attracting investment has been proposed. The regulation of joint activities to implement the development program for the regional power supply industry has been proposed. The management system to develop the Russian power industry has been proposed. The comparative analysis of generating capacity development mechanisms has been carried out, such as capacity supply agreement (CSA, investment support mechanism (ISM, and long-term power market (LPM. The interaction procedure of the planning of the power supply infrastructure development has been described. The mechanism connecting the state sectoral and regional planning and corporate planning of power supply infrastructure development has been proposed. The regional aspects of industrial policy and its legislative support have been considered. To successfully implement the public-private-partnership (PPP projects, it is necessary to create the effective PPP model within the federal and regional legislation framework; to develop the financial model providing the recoverability of investments; to provide a mutually beneficial cooperation between executive bodies and private investors. The possibility to apply the PPP mechanism for regional

Planning research on the next strategical project through the trend analysis on radiation fusion technology, industry and policy

International Nuclear Information System (INIS)

Kim, Dong Sub; Choi, Jae Hak; Kim, Tak Hyun

2013-01-01

Ο The planning research for establish a detailed implementation strategy to serve as small, but a strong institution leading national radiation research and resolving the pending issues related to using radiation - Now is a time when it needs a implementation strategy to achieve it's unique mission as the sole radiation-specialized research institute leading to promote the radiation industry. Ο The main background of this study is to build the planning of a new paradigm for research and development to cope with the changing domestic and international environment for sustainable growth - As the domestic regional radiation field is getting more competitive and the cooperative group expands, it needs to adapt to the global trend such as technology convergence and acceleration etc.. - The need for establish basic database to make a new strategy in order to narrow the technology gap in the radiation fusion technology comparing to the developed country and cope with emerging country's advancement in technology Ο The use to build basic database to spearhead the project and set aside a budget effectively - It's to be used as a reference to set aside a budget through planning strategy industry field to forecast the industrial demand and variation of the future policy and create blue ocean and niche markets

Problem Solving Model for Science Learning

Science.gov (United States)

Alberida, H.; Lufri; Festiyed; Barlian, E.

2018-04-01

This research aims to develop problem solving model for science learning in junior high school. The learning model was developed using the ADDIE model. An analysis phase includes curriculum analysis, analysis of students of SMP Kota Padang, analysis of SMP science teachers, learning analysis, as well as the literature review. The design phase includes product planning a science-learning problem-solving model, which consists of syntax, reaction principle, social system, support system, instructional impact and support. Implementation of problem-solving model in science learning to improve students' science process skills. The development stage consists of three steps: a) designing a prototype, b) performing a formative evaluation and c) a prototype revision. Implementation stage is done through a limited trial. A limited trial was conducted on 24 and 26 August 2015 in Class VII 2 SMPN 12 Padang. The evaluation phase was conducted in the form of experiments at SMPN 1 Padang, SMPN 12 Padang and SMP National Padang. Based on the development research done, the syntax model problem solving for science learning at junior high school consists of the introduction, observation, initial problems, data collection, data organization, data analysis/generalization, and communicating.

Route planning of raw materials transportation in the industrial hub of Mariupol city

Directory of Open Access Journals (Sweden)

Юлія Вікторівна Булгакова

2017-07-01

Full Text Available The multi-modal freight transportation routes planning problem is viewed in this paper. The case study of iron ore deliveries to the metallurgical enterprises of Mariupol from Kryvyi Rih is presented. Based on the analysis of Ukrainian railroads and sea ports infrastructures six possible routes of multi-modal iron ore transportation are built. The paper presents a short review of route planning problem in multi-modal freight transportations, which are use sea and land parts together, regarding decision support methods of routes evaluation and selection. The lack of studies dedicated to fuzzy logic theory application for solving the stated problems is identified. The relevance of fuzzy set application to the route planning problem is proved. Taking into account the peculiarities of iron ore transportations technology, the following criterions of routes evaluation are chosen: «transportation costs», «delivery times», «transportation risks». The model of multicriterion decision-making of routes evaluation and the optimal route selection, based on fuzzy logic theory, is developed. Criteria of routes evaluation are set by three terms Gaussian and sigmoidal membership functions. The approach to each function construction is practice-based and executed together with iron ore supply chain manager. The model is created in MATLAB Fuzzy Logic Tool Box environment using Mamdani’s fuzzy inference

76 FR 5227 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 24 to the...

Science.gov (United States)

2011-01-28

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self- [[Page 5228

Worry and problem-solving skills and beliefs in primary school children.

Science.gov (United States)

Parkinson, Monika; Creswell, Cathy

2011-03-01

To examine the association between worry and problem-solving skills and beliefs (confidence and perceived control) in primary school children. Children (8-11 years) were screened using the Penn State Worry Questionnaire for Children. High (N= 27) and low (N= 30) scorers completed measures of anxiety, problem-solving skills (generating alternative solutions to problems, planfulness, and effectiveness of solutions) and problem-solving beliefs (confidence and perceived control). High and low worry groups differed significantly on measures of anxiety and problem-solving beliefs (confidence and control) but not on problem-solving skills. Consistent with findings with adults, worry in children was associated with cognitive distortions, not skills deficits. Interventions for worried children may benefit from a focus on increasing positive problem-solving beliefs. ©2010 The British Psychological Society.

System of optimization computations of five year plans in the coal industry. [USSR

Energy Technology Data Exchange (ETDEWEB)

Goyzman, E I; Korenev, V G

1980-01-01

A system of optimization computations of five year plans is set forth which was developed over a number of years at the Central Scientific Research Institute of Economics and Scientific-Technical Information of the Coal Industry. Basic principles of design and methodological approaches are given which were used in development of the systemas well as levels of administration and information links between them. The report analyzes the characteristics of problems of planning which arise at different stages of formation of the five year plans and discusses possibilities of taking into account these characteristics in optimized models. Economic formulations of problems of optimization of five year plans are given as applied to two levels of administration: at the branch level and at the level of production associations. Economic-mathematical models of optimization of five year plans are developed for each of the levels and their characteristic features described. The primary methodological principles, on the basis of which optimization models were developed are examined. An economic-mathematical model with continuous variables was developed for the branch level of planning. Volumes of recovery according to a group of shafts in the stage of normal operation (stable group) of each production enterprise are adopted as model variables. A system of limitations which includes limitations on volumes and distinguishable resources is formulated. The minimum of operating expenses, minimum of capital investments and maximum of recovery volumes for the planned period can be used as the optimization criteria. An economic-mathematical model which uses integral variable was developed for the production association level.

Aggregate Production Planning, Casestudy in a Medium-sized Industry of the Rubber Production Line in Ecuador.

Science.gov (United States)

Rosero-Mantilla, César; Sánchez-Sailema, Mayra; Sánchez-Rosero, Carlos; Galleguillos-Pozo, Rosa

2017-06-01

This research aims to improve the productivity in the rubber line of a medium-sized industry by increasing the production capacities through the use of the Aggregate Production Planning model. For this purpose an analysis of the production processes of the line was made and the aggregate plan was defined evaluating two strategies: Exact Production Plan (Zero Inventory) and Constant Workforce Plan (Vary Inventory) by studying the costs of both inventory maintenance and workforce. It was also determined how the installed capacity was used with the standards of the rubber line and measures for decreasing production costs were proposed. It was proven that only 70% of the plant capacity was being used so it could be possible to produce more units and to obtain a bigger market for the products of this line.+

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP plan in lobster processing industries

Directory of Open Access Journals (Sweden)

Cristina Farias da Fonseca

2013-03-01

Full Text Available This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP plan resulted in the detection of two critical control points (CCPs including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP hazards.

Integrated production-distribution planning optimization models: A review in collaborative networks context

Directory of Open Access Journals (Sweden)

Beatriz Andres

2017-01-01

Full Text Available Researchers in the area of collaborative networks are more and more aware of proposing collaborative approaches to address planning processes, due to the advantages associated when enterprises perform integrated planning models. Collaborative production-distribution planning, among the supply network actors, is considered a proper mechanism to support enterprises on dealing with uncertainties and dynamicity associated to the current markets. Enterprises, and especially SMEs, should be able to overcome the continuous changes of the market by increasing their agility. Carrying out collaborative planning allows enterprises to enhance their readiness and agility for facing the market turbulences. However, SMEs have limited access when incorporating optimization tools to deal with collaborative planning, reducing their ability to respond to the competition. The problem to solve is to provide SMEs affordable solutions to support collaborative planning. In this regard, new optimisation algorithms are required in order to improve the collaboration within the supply network partners. As part of the H2020 Cloud Collaborative Manufacturing Networks (C2NET research project, this paper presents a study on integrated production and distribution plans. The main objective of the research is to identify gaps in current optimization models, proposed to address integrated planning, taking into account the requirements and needs of the industry. Thus, the needs of the companies belonging to the industrial pilots, defined in the C2NET project, are identified; analysing how these needs are covered by the optimization models proposed in the literature, to deal with the integrated production-distribution planning.

Industrial Performance of the Renewable Resources Industry in China

OpenAIRE

Dong Zhou; Xingang Zhao

2015-01-01

Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important rol...

Global process industry initiatives to reduce major accident hazards

Energy Technology Data Exchange (ETDEWEB)

Pitblado, Robin [DNV Energy Houston, TX (United States). SHE Risk Management; Pontes, Jose [DNV Energy Rio de Janeiro, RJ (Brazil). Americas Region; Oliveira, Luiz [DNV Energy Rio de Janeiro, RJ (Brazil)

2008-07-01

Since 2000, disasters at Texas City, Toulouse, Antwerp, Buncefield, P-36 and several near total loss events offshore in Norway have highlighted that major accident process safety is still a serious issue. Hopes that Process Safety Management or Safety Case regulations would solve these issues have not proven true. The Baker Panel recommended to BP several actions mainly around leadership, incentives, metrics, safety culture and more effective implementation of PSM systems. In Europe, an approach built around mechanical integrity and safety barriers, especially relating to technical safety systems, is being widely adopted. DNV has carried out a global survey of process industry initiatives, by interview and by literature review, for both upstream and downstream activities, to identify what the industry itself is planning to implement to enhance process safety in the next 5 - 10 years. This shows that an approach combining Baker Panel and EU barrier approaches and some nuclear industry real-time risk management approaches might be the best means to achieve a factor of 3-4 improvement in process safety. (author)

The effectiveness of problem-based learning on students’ problem solving ability in vector analysis course

Science.gov (United States)

Mushlihuddin, R.; Nurafifah; Irvan

2018-01-01

The student’s low ability in mathematics problem solving proved to the less effective of a learning process in the classroom. Effective learning was a learning that affects student’s math skills, one of which is problem-solving abilities. Problem-solving capability consisted of several stages: understanding the problem, planning the settlement, solving the problem as planned, re-examining the procedure and the outcome. The purpose of this research was to know: (1) was there any influence of PBL model in improving ability Problem solving of student math in a subject of vector analysis?; (2) was the PBL model effective in improving students’ mathematical problem-solving skills in vector analysis courses? This research was a quasi-experiment research. The data analysis techniques performed from the test stages of data description, a prerequisite test is the normality test, and hypothesis test using the ANCOVA test and Gain test. The results showed that: (1) there was an influence of PBL model in improving students’ math problem-solving abilities in vector analysis courses; (2) the PBL model was effective in improving students’ problem-solving skills in vector analysis courses with a medium category.

76 FR 13442 - Joint Industry Plan; Order Approving Amendment No. 25 to the Joint Self-Regulatory Organization...

Science.gov (United States)

2011-03-11

..., Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on... Exchange, Inc., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC...-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of Quotation and...

78 FR 66788 - Joint Industry Plan; Order Approving Amendment No. 30 to the Joint Self-Regulatory Organization...

Science.gov (United States)

2013-11-06

..., Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on... Exchange, Inc., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC...-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of Quotation and...

Heating hub and power hub models for optimal performance of an industrial consumer

International Nuclear Information System (INIS)

Soudmand, Behnam Maleki; Esfetanaj, Naser Nourani; Mehdipour, Soleiman; Rezaeipour, Roshanak

2017-01-01

Highlights: • Multi-objective framework is proposed for large industrial consumer. • Weighted sum method is used to solve the proposed multi-objective model. • Fuzzy satisfying technique is used to select the trade-off solution. • Demand response program is employed to reduce cost and emission of large consumer. - Abstract: In addition to economic objectives that has always been considered to be the first priority in the scheduling and planning of power systems, concerns over emission of greenhouse gases due to energy consumption of industrial consumers have made policy makers consider environmental issues in the scheduling of such systems. In this paper, a multi-objective framework has been proposed for environmental and economic performance of large consumer in the presence of demand response program (DRP). In order to solve proposed multi-objective model, weighted sum technique is employed and trade-off solution satisfying conflicting objective functions is selected using fuzzy satisfying approach. DRP is employed to shift load from peak periods to off-peak periods to reduce total operation cost and emission. In order to model the proposed problem, a mixed-integer linear program has been employed and GAMS software has been utilized to solve it. Different case studies have been studied and the results have been presented to validate the effectiveness of proposed methods.

Hybrid supply chain model for material requirement planning under financial constraints: A case study

Science.gov (United States)

Curci, Vita; Dassisti, Michele; Josefa, Mula Bru; Manuel, Díaz Madroñero

2014-10-01

Supply chain model (SCM) are potentially capable to integrate different aspects in supporting decision making for enterprise management tasks. The aim of the paper is to propose an hybrid mathematical programming model for optimization of production requirements resources planning. The preliminary model was conceived bottom-up from a real industrial case analysed oriented to maximize cash flow. Despite the intense computational effort required to converge to a solution, optimisation done brought good result in solving the objective function.

The application of dynamic programming in production planning

Science.gov (United States)

Wu, Run

2017-05-01

Nowadays, with the popularity of the computers, various industries and fields are widely applying computer information technology, which brings about huge demand for a variety of application software. In order to develop software meeting various needs with most economical cost and best quality, programmers must design efficient algorithms. A superior algorithm can not only soul up one thing, but also maximize the benefits and generate the smallest overhead. As one of the common algorithms, dynamic programming algorithms are used to solving problems with some sort of optimal properties. When solving problems with a large amount of sub-problems that needs repetitive calculations, the ordinary sub-recursive method requires to consume exponential time, and dynamic programming algorithm can reduce the time complexity of the algorithm to the polynomial level, according to which we can conclude that dynamic programming algorithm is a very efficient compared to other algorithms reducing the computational complexity and enriching the computational results. In this paper, we expound the concept, basic elements, properties, core, solving steps and difficulties of the dynamic programming algorithm besides, establish the dynamic programming model of the production planning problem.

Evaluating Levels of Project Planning and their Effects on Performance in the Nigerian Construction Industry

Directory of Open Access Journals (Sweden)

Godwin Idoro

2012-11-01

Full Text Available This study compares the level of project planning on public andprivate sectors projects and its impact on performance. Thepurpose is to create awareness of the level and effectivenessof the planning done by public and private clients in the deliveryof construction projects. A questionnaire survey administeredto a sample of 130 client representatives selected by stratifi edrandom sampling from the population of public and private clientsin the Nigerian construction industry is used and analysed usingdescriptive statistics, the t-test and Spearman correlation test. Theresults show that the level of preconstruction planning on privatesector projects is higher than that of public sector projects whilethe level of contract planning done by the latter is higher thanthat of the former. Furthermore, the performance of private sectorprojects is higher than that of public sector projects in many of theparameters used. However, the level of preparation of life-cyclecharts that concern project delivery time in both public and privatesectors projects is low and the level of project planning in the twocategories of projects has a limited impact on project performance.The understanding of how public and private sectors projectsperform in planning and its impact are expected to assist publicand private clients to know the challenges ahead of them in theireffort to improve the planning and performance of their projects.

MARKETING PLANNING IN HEALTHCARE INDUSTRY

Directory of Open Access Journals (Sweden)

Bobeica Ana Amaria

2013-04-01

Full Text Available The purpose of this paper is to develop a perspective on what is important or critical to the discipline of healthcare marketing by analyzing the marketing plan from the institutional (or organizational perspective. This “salience issue” is complicated by the structural problems in healthcare such as new advertising programs, advances in medical technology, and the escalating costs of care in the recent economic situation of world economic crisis. Reviewing a case study, the paper examines how marketing managers face increasingly difficult management and it emphasizes one more time the importance of marketing in the internal organizational structure. Also it shows the direct connection between the marketing strategy, the Quality of Healthcare and marketing planning in the internal organization of Private Healthcare Practice in Romania. Also it concludes that marketing planning in healthcare has to be very precised in order to achieve some major objectives: customer care, financial stability, equilibrium between stakeholders and shareholders and future improvement in communication to customers. The marketing strategies and programs discussed in this paper follow the analysis of the 4Ps of Healthcare Marketing Services and propose call to action plans and possibilities that might result in a more particular case study analysis of the Romanian Healthcare Market.

Two pricing methods for solving an integrated commercial fishery ...

African Journals Online (AJOL)

a model (Hasan and Raffensperger, 2006) to solve this problem: the integrated ... planning and labour allocation for that processing firm, but did not consider any fleet- .... the DBONP method actually finds such price information, and uses it.

Petroleum industry of Korea seen from industry

Energy Technology Data Exchange (ETDEWEB)

Kim, H.P. [SK Co, Seoul (Korea, Republic of)

1998-05-01

The domestic petroleum industry faced with outward opening and exchange crisis is put under the most difficult period so far, and costs reduction and securing international competitive power in software field are emerging as important assignments on which the life and death of national key industries depends not only as a restructuring issue of each petroleum company. Required strategy of petroleum industry to solve this effectively this year must be the thorough revamping through restructuring and reform of management standards not the survival exercise through price competition. For this, each petroleum company and distributor should open a new petroleum industry in which fair rules of the game are developed as well as costs reduction through joint efforts and value creation in overall industry. For this, government should support the domestic petroleum industry to stand up straight as a keeper of domestic energy industry by helping it to arm with international competitive power within a short period of time through overall needed system and legal scheme. It is because nobody can deny that energy industry is the key industry on which national existence is at stake.

Topics in industrial mathematics

International Nuclear Information System (INIS)

Vatsya, S.R.

1992-01-01

Mathematical methods are widely used to solve practical problems arising in modern industry. This article outlines some of the topics relevant to AECL programmes. This covers the applications of transmission and neutron transport tomography to determine density distributions in rocks and two phase flow situations. Another example covered is the use of variational methods to solve the problems of aerosol migration and control theory. (author). 7 refs

DEVELOPING PROBLEM SOLVING SKILLS FOR LIFELONG LEARNING THROUGH WORK-BASED LEARNING AMONG COMMUNITY COLLEGE STUDENTS

OpenAIRE

Wan Azlinda Wan Mohamed; Badrul Omar; Mohd Faroul Rafiq Romli

2010-01-01

Many training providers are working to improve their curricula to meet the demand of today’s industries. The Malaysian College Communities, one of the major providers for lifelong learning program, had introduced the Work-Based Learning (WBL) concept since 2007 to ensure that their graduates met these demands. One of the key skills required by industry is problem solving skill. The ability to solve a complex or an ill-structured work problem in the workplace is the kind of skill demanded at a...

Junior high school students’ reflective thinking on fraction problem solving: In case of gender differences

Science.gov (United States)

Rasyid, M. A.; Budiarto, M. T.; Lukito, A.

2018-01-01

This study aims to describe reflective thinking of junior high school students on solving the fractions problem in terms of gender differences. This research is a qualitative approach involving one male student and one female student in seventh grade. The data were collected through the assignment of fractional problem solving and interview, then the data were triangulated and analyzed by three stages, namely data condensation, data display and conclusion. The results showed that the subjects of male and female were reacting, elaborating and contemplating at each stage of solving the fractions problem. But at the stage of devising the plan, the female subject was contemplating, relying more on their beliefs, did not consider their experience, in addition, the female subject didn’t use experience of the steps she planned to solve the problem of fractions.

Regional risk assessment approaches to land planning for industrial polluted areas in China: the Hulunbeier region case study.

Science.gov (United States)

Li, Daiqing; Zhang, Chen; Pizzol, Lisa; Critto, Andrea; Zhang, Haibo; Lv, Shihai; Marcomini, Antonio

2014-04-01

The rapid industrial development and urbanization processes that occurred in China over the past 30years has increased dramatically the consumption of natural resources and raw materials, thus exacerbating the human pressure on environmental ecosystems. In result, large scale environmental pollution of soil, natural waters and urban air were recorded. The development of effective industrial planning to support regional sustainable economy development has become an issue of serious concern for local authorities which need to select safe sites for new industrial settlements (i.e. industrial plants) according to assessment approaches considering cumulative impacts, synergistic pollution effects and risks of accidental releases. In order to support decision makers in the development of efficient and effective regional land-use plans encompassing the identification of suitable areas for new industrial settlements and areas in need of intervention measures, this study provides a spatial regional risk assessment methodology which integrates relative risk assessment (RRA) and socio-economic assessment (SEA) and makes use of spatial analysis (GIS) methodologies and multicriteria decision analysis (MCDA) techniques. The proposed methodology was applied to the Chinese region of Hulunbeier which is located in eastern Inner Mongolia Autonomous Region, adjacent to the Republic of Mongolia. The application results demonstrated the effectiveness of the proposed methodology in the identification of the most hazardous and risky industrial settlements, the most vulnerable regional receptors and the regional districts which resulted to be the most relevant for intervention measures since they are characterized by high regional risk and excellent socio-economic development conditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Connecting Problem-Solving Style to Peer Evaluations of Performance in Secondary Cooperative Learning Projects

Science.gov (United States)

Bush, Sarah A.; Friedel, Curtis R.; Hoerbert, Lindsey R.; Broyles, Thomas W.

2017-01-01

With an evolving and expanding agricultural industry, it is crucial to provide future professionals with valuable experiences and skills in problem solving, communication, and teamwork. Agricultural summer programs for secondary students, which provide cooperative learning experiences with a focus on group work and problem solving, aim to help…

Analysis on the Workspace of Six-degrees-of-freedom Industrial Robot Based on AutoCAD

Directory of Open Access Journals (Sweden)

Li Jin-quan

2017-01-01

Full Text Available This research discusses the workspace of the industrial robot with six degrees of freedom(6-DOF based on AutoCAD platform. Based on the analysis of the overall configuration of the robot, this research establishes the kinematic mathematical model of the industrial robot by using DH parameters, and then solves the workspace of the robot consequently. In the AutoCAD, Auto Lisp language program is adopted to simulate the two-dimensional(2D and three-dimensional(3D space of the robot. Software user interface is written by using the dialog box control language of Visual LISP. At last, the research analyzes the trend of the shape and direction of the workspace when the length and angle range of the robot are changed. This research lays the foundation for the design, control and planning of industrial robots.

76 FR 5224 - Joint Industry Plan; Notice of Filing of Amendment No. 25 to the Joint Self-Regulatory...

Science.gov (United States)

2011-01-28

... Collection, Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed... Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of...

Design of a HACCP plan for the industrial process of vacuum-packed frozen surimi

Directory of Open Access Journals (Sweden)

Catarina Fernandes

2014-05-01

Full Text Available The Hazard Analysis and Critical Control Point (HACCP is a system that enables identification, assessment and control of hazards related with production, processing, distribution in order to get safe food. The aim of this study was to design a HACCP plan for implementing in a processing line of vacuum-packed frozen surimi. Surimi is made from fisheries byproducts that may have initial unattractive characteristics and whose industrial processing adds commercial value. Heterogeneous quality of raw products and the high complexity of the industrial flowchart may induce problems in the final sanitary profile of surimi. The methodology was based in the evaluation of the pre-requisite programs, risk evaluation of considered hazards, the application of principles of HACCP and the compliance with European regulations. A HACCP plan is proposed with the scope, the selection of HACCP team, product description and its intended use, the flow diagram of the process, hazard analysis and identification of Critical Control Points (CCP, monitoring system, correction actions and records. The potential hazards identified were: excess of chloride (chemical, remains of fishbone (physical and growth of human-related pathogens after defrosting (biological. The control measures of CCP are referred as control of time-temperature and pH in pre-wash and defrosting stages and visual inspection during depulping process.

Planning Annuaulised hours when spike in demand exists

Directory of Open Access Journals (Sweden)

MR Sureshkumar

2012-04-01

Full Text Available Manpower planning using annualised hours is an effective tool where seasonal demand for staff in industry exists. In annualised hours (AH workers are contracted to work for a certain number of hours per year. The workers are associated with relative efficiency for different types of tasks. This paper proposes a Mixed Integer linear Programming (MILP model to solve an annualised working hours planning problem when spike in demand exists. The holiday weeks for the workers are considered as partially individualised. If a worker has been assigned with more than one type of working week in a week, this will be compensated with one or more holiday week. The performance of the model is demonstrated with an example. It can be seen that this type of modelling helps to meet the spikes in demand with less capacity shortage compared with one working week in a week.

Practical use of ergonomics in industrial processes

International Nuclear Information System (INIS)

1976-01-01

Six lectures deal with new developments in the application of ergonomic knowledge, in particular to nuclear technology. All contributions have in common the aspects of analysis and structure of man-machine-systems in which human operators have to process information and have to make decisions. Quoting a lot of examples from a variety of industrial sectors, the article discusses complexes of problems and ways of solving them concerning questions requiring the answer 'yes' or 'no', concerning the dialogue man-computer, the organization of central control mechanisms, the avoidance of human errors, influence of man on system safety, and the rational incorporation of ergonomics in system planning. This publication is meant to be a contribution to extend the knowledge on the organization of work from an ergonomic and engineer/psychological point of view. It is to show how the knowledge of the nature of man can be applied as a systems component in order to make industrial processes safer and more economical, and to entrust man with purposeful and satisfying tasks. (orig./LN) [de

A Cognitive Model for Problem Solving in Computer Science

Science.gov (United States)

Parham, Jennifer R.

2009-01-01

According to industry representatives, computer science education needs to emphasize the processes involved in solving computing problems rather than their solutions. Most of the current assessment tools used by universities and computer science departments analyze student answers to problems rather than investigating the processes involved in…

Solving the Airline Crew Pairing Problem using Subsequence Generation

DEFF Research Database (Denmark)

Rasmussen, Matias Sevel; Lusby, Richard Martin; Ryan, David M.

2010-01-01

Good and fast solutions to the airline crew pairing problem are highly interesting for the airline industry, as crew costs are the biggest expenditure after fuel for an airline. The crew pairing problem is typically modelled as a set partitioning problem and solved by column generation. However, ...

Solving the Airline Crew Pairing Problem using Subsequence Generation

DEFF Research Database (Denmark)

Rasmussen, Matias Sevel; Ryan, David; Lusby, Richard Martin

2009-01-01

Good and fast solutions to the airline crew pairing problem are highly interesting for the airline industry, as crew costs are the biggest expenditure after fuel for an airline. The crew pairing problem is typically modelled as a set partitioning problem and solved by column generation. However, ...

Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas

International Nuclear Information System (INIS)

Santos, Joyra Amaral dos

1999-08-01

This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

Penggunaan lemak fleshing industri penyamakan kulit untuk pembuatan sabun mandi

OpenAIRE

Ign. Sunaryo; Sri Sutyasmi; Widhari; Murwati

2002-01-01

Abstract An experimentation the Use of Fat from Fleshing of Leather Tanning Industry to Produce Bath Soap was aimed to use the fat from fleshing to gain the alternative source of basic material for bath soap, to assist the industry to solve the environmental pollution and increasing the population income. The point to be gained after finishing this experiment was to find out the problem solving of environmental pollution problem caused by fleshing from leather tanning industry. Goat/sheep...

Planning for Office Automation.

Science.gov (United States)

Mick, Colin K.

1983-01-01

Outlines a practical approach to planning for office automation termed the "Focused Process Approach" (the "what" phase, "how" phase, "doing" phase) which is a synthesis of the problem-solving and participatory planning approaches. Thirteen references are provided. (EJS)

Multiyear Program Plan for the High Temperature Materials Laboratory; FINAL

International Nuclear Information System (INIS)

Arvid E. Pasto

2000-01-01

Recently, the U.S. Department of Energy's (DOE) Office of Heavy Vehicle Technologies (OHVT) prepared a Technology Roadmap describing the challenges facing development of higher fuel efficiency, less polluting sport utility vehicles, vans, and commercial trucks. Based on this roadmap, a multiyear program plan (MYPP) was also developed, in which approaches to solving the numerous challenges are enumerated. Additional planning has been performed by DOE and national laboratory staff, on approaches to solving the numerous challenges faced by heavy vehicle system improvements. Workshops and planning documents have been developed concerning advanced aerodynamics, frictional and other parasitic losses, and thermal management. Similarly, the Heavy Vehicle Propulsion Materials Program has developed its own multiyear program plan. The High Temperature Materials Laboratory, a major user facility sponsored by OHVT, has now developed its program plan, described herein. Information was gathered via participation in the development of OHVT's overall Technology Roadmap and MYPP, through personal contacts within the materials-user community, and from attendance at conferences and expositions. Major materials issues for the heavy vehicle industry currently center on trying to increase efficiency of (diesel) engines while at the same time reducing emissions (particularly NO(sub x) and particulates). These requirements dictate the use of increasingly stronger, higher-temperature capable and more corrosion-resistant materials of construction, as well as advanced catalysts, particulate traps, and other pollution-control devices. Exhaust gas recirculation (EGR) is a technique which will certainly be applied to diesel engines in the near future, and its use represents a formidable challenge, as will be described later. Energy-efficient, low cost materials processing methods and surface treatments to improve wear, fracture, and corrosion resistance are also required

78 FR 29793 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 29 to the...

Science.gov (United States)

2013-05-21

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction..., Chicago Stock Exchange, Inc., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory... Collection, Consolidation, and Dissemination of Quotation and Transaction Information for Nasdaq-Listed...

75 FR 59755 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 22 to the...

Science.gov (United States)

2010-09-28

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC, NASDAQ OMX BX, Inc... Governing the Collection, Consolidation, and Dissemination of Quotation and Transaction Information for...

78 FR 22588 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 28 to the...

Science.gov (United States)

2013-04-16

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction..., Chicago Stock Exchange, Inc., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory... Collection, Consolidation, and Dissemination of Quotation and Transaction Information for Nasdaq-Listed...

78 FR 19029 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 27 to the...

Science.gov (United States)

2013-03-28

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction..., Chicago Stock Exchange, Inc., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory... Collection, Consolidation, and Dissemination of Quotation and Transaction Information for Nasdaq-Listed...

78 FR 58352 - Joint Industry Plan; Notice of Filing of Amendment No. 30 to the Joint Self-Regulatory...

Science.gov (United States)

2013-09-23

... Collection, Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed... Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... ``Committee'') \\3\\ of the Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and...

SIMULATION AS PART OF INDUSTRIAL PRACTICE

Directory of Open Access Journals (Sweden)

Miriam Pekarčíková

2015-06-01

Full Text Available Article discusses the simulation as an efficient scientific method of problem solving in industrial practice. It creates an overview of the simulation program means used in industrial practice and creates an overview of tools for discrete, continuous, and combined.

Planning Model of Physics Learning In Senior High School To Develop Problem Solving Creativity Based On National Standard Of Education

Science.gov (United States)

Putra, A.; Masril, M.; Yurnetti, Y.

2018-04-01

One of the causes of low achievement of student’s competence in physics learning in high school is the process which they have not been able to develop student’s creativity in problem solving. This is shown that the teacher’s learning plan is not accordance with the National Eduction Standard. This study aims to produce a reconstruction model of physics learning that fullfil the competency standards, content standards, and assessment standards in accordance with applicable curriculum standards. The development process follows: Needs analysis, product design, product development, implementation, and product evaluation. The research process involves 2 peers judgment, 4 experts judgment and two study groups of high school students in Padang. The data obtained, in the form of qualitative and quantitative data that collected through documentation, observation, questionnaires, and tests. The result of this research up to the product development stage that obtained the physics learning plan model that meets the validity of the content and the validity of the construction in terms of the fulfillment of Basic Competence, Content Standards, Process Standards and Assessment Standards.

Expansion planning of brazilian electric sector: institutional changes, new policies and new instruments for planning

International Nuclear Information System (INIS)

Bajay, S.V.; Silva, W.A. da; Ricciulli, D.L.S.

1990-01-01

The Brazilian power supply industry has been in crisis for many years, particularly due to financial and institutional problems. There are many reasons for that, several of them from outside the industry. In this paper a diagnosis of the main elements of this crisis is worked out, in the context of the industry's expansion planning. Following, institutional changes, new policies and new instruments are proposed for this planning. The institutional setting, the demand studies, the demand side management, the supply optimisation, the rural electrification, the decentralized generation of electricity, the tariff structure, the ways of financing the industry, the technological advances, the social and environmental impacts and the integrated planning of the industry are discussed, together with the planning of the power supply industry interactions with the other energy supply industries and the rest of the economy. (author)

Lazy Toggle PRM: A single-query approach to motion planning

KAUST Repository

Denny, Jory; Shi, Kensen; Amato, Nancy M.

2013-01-01

Probabilistic RoadMaps (PRMs) are quite suc-cessful in solving complex and high-dimensional motion plan-ning problems. While particularly suited for multiple-query scenarios and expansive spaces, they lack efficiency in both solving single

Multicriteria vehicle routing problem solved by artificial immune system

Directory of Open Access Journals (Sweden)

Bogna MRÓWCZYŃSKA

2015-09-01

Full Text Available Vehicles route planning in large transportation companies, where drivers are workers, usually takes place on the basis of experience or intuition of the employees. Because of the cost and environmental protection, it is important to save fuel, thus planning routes in an optimal way. In this article an example of the problem is presented solving delivery vans route planning taking into account the distance and travel time within the constraints of vehicle capacities, restrictions on working time of drivers and having varying degrees of movement. An artificial immune system was used for the calculations.

The profile of problem-solving ability of students of distance education in science learning

Science.gov (United States)

Widiasih; Permanasari, A.; Riandi; Damayanti, T.

2018-05-01

This study aims to analyze the students' problem-solving ability in science learning and lesson-planning ability. The method used is descriptive-quantitative. The subjects of the study were undergraduate students of Distance Higher Education located in Serang, majoring in Primary Teacher Education in-service training. Samples were taken thoroughly from 2 groups taking the course of Science Learning in Primary School in the first term of 2017, amounted to 39 students. The technique of data collection used is essay test of problem solving from case study done at the beginning of lecture in February 2017. The results of this research can be concluded that In-service Training of Primary School Teacher Education Program are categorized as quite capable (score 66) in solving science learning problem and planning science lesson. Therefore, efforts need to be done to improve the ability of students in problem solving, for instance through online tutorials with the basis of interactive discussions.

Penggunaan Lemak Fleshing Industri Penyamakan Kulit Untuk Pembuatan Sabun Mandi

OpenAIRE

Sunaryo, Ignatius; Sutyasmi, Sri; Widari, Widari; Murwati, Murwati

2002-01-01

An experimentation the Use of Fat from Fleshing of Leather Tanning Industry to Produce Bath Soap was aimed to use the fat from fleshing to gain the alternative source of basic material for bath soap, to assist the industry to solve the environmental pollution and increasing the population income. The point to be gained after finishing this experiment was to find out the problem solving of environmental pollution problem caused by fleshing from leather tanning industry. Goat/sheep fleshing fro...

Scenario Approach to the Planning of the Production Activities of the Enterprise with a Discrete Type of Production (for Example, Electrical Engineering Industry

Directory of Open Access Journals (Sweden)

Krylova E.V.

2017-12-01

Full Text Available In conditions of global economic instability the success of electromechanical enterprises depends on their ability to react quickly to challenges of external environment. In order to create background and conditions for this ability the given enterprises refer to manufacturing activity planning, using a probabilistic approach based on forecasts that may not be true. The question of provision of more complete consideration of various internal and external factors and acceleration of decision making process and reaction to changing business environment arises before the organizations that concern more effective scheduling policy. International practice of solving such problems generally leads to qualitative discussion, whereas quantitative assessment of impact of control parameters of enterprise is not practically used, because there is no one systematic approach to manufacturing activity planning. On the basis of studying of international practices methodical guidelines of scenario approach to manufacturing activity planning with mathematical modeling of economics of producer price on electromechanical enterprises have been developed, which reasonably could be used with reference to and interaction with enterprise manufacturing program. The described approach allows solving planning problems iteratively in real-time mode concerning profit maximization, to form producer prices, to divide overhead costs according to the type of products and carry out cost accounting according to the type of a product, and it will provide functional interaction between factors and performance indicators.

Multiyear Program Plan for the High Temperature Materials Laboratory

Energy Technology Data Exchange (ETDEWEB)

Arvid E. Pasto

2000-03-17

Recently, the U.S. Department of Energy's (DOE) Office of Heavy Vehicle Technologies (OHVT) prepared a Technology Roadmap describing the challenges facing development of higher fuel efficiency, less polluting sport utility vehicles, vans, and commercial trucks. Based on this roadmap, a multiyear program plan (MYPP) was also developed, in which approaches to solving the numerous challenges are enumerated. Additional planning has been performed by DOE and national laboratory staff, on approaches to solving the numerous challenges faced by heavy vehicle system improvements. Workshops and planning documents have been developed concerning advanced aerodynamics, frictional and other parasitic losses, and thermal management. Similarly, the Heavy Vehicle Propulsion Materials Program has developed its own multiyear program plan. The High Temperature Materials Laboratory, a major user facility sponsored by OHVT, has now developed its program plan, described herein. Information was gathered via participation in the development of OHVT's overall Technology Roadmap and MYPP, through personal contacts within the materials-user community, and from attendance at conferences and expositions. Major materials issues for the heavy vehicle industry currently center on trying to increase efficiency of (diesel) engines while at the same time reducing emissions (particularly NO{sub x} and particulates). These requirements dictate the use of increasingly stronger, higher-temperature capable and more corrosion-resistant materials of construction, as well as advanced catalysts, particulate traps, and other pollution-control devices. Exhaust gas recirculation (EGR) is a technique which will certainly be applied to diesel engines in the near future, and its use represents a formidable challenge, as will be described later. Energy-efficient, low cost materials processing methods and surface treatments to improve wear, fracture, and corrosion resistance are also required.

76 FR 76455 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 26 to the...

Science.gov (United States)

2011-12-07

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction..., Chicago Stock Exchange, Inc., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory..., Consolidation, and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on...

A New Extended MILP MRP Approach to Production Planning and Its Application in the Jewelry Industry

Directory of Open Access Journals (Sweden)

Erhan Yazıcı

2016-01-01

Full Text Available It is important to manage reverse material flows such as recycling, reusing, and remanufacturing in a production environment. This paper addresses a production planning problem which involves reusing of scrap and recycling of waste that occur in the various stages of the production process and remanufacturing/recycling of returns in a closed-loop supply chain environment. An extended material requirement planning (MRP is proposed as a mixed integer linear programming (MILP model which includes—beside forward—these reverse material flows. The proposed model is developed for the jewelry industry in Turkey, which uses gold as the primary resource of production. The aim is to manage these reverse material flows as a part of production planning to utilize resources. Considering the mostly unpredictable nature of reverse material flows, the proposed model is likewise transformed into a fuzzy model to provide a better review of production plan for the decision maker. The suggested model is examined through a case study to test the applicability and efficiency.

Representation of Students in Solving Simultaneous Linear Equation Problems Based on Multiple Intelligence

Science.gov (United States)

Yanti, Y. R.; Amin, S. M.; Sulaiman, R.

2018-01-01

This study described representation of students who have musical, logical-mathematic and naturalist intelligence in solving a problem. Subjects were selected on the basis of multiple intelligence tests (TPM) consists of 108 statements, with 102 statements adopted from Chislet and Chapman and 6 statements equal to eksistensial intelligences. Data were analyzed based on problem-solving tests (TPM) and interviewing. See the validity of the data then problem-solving tests (TPM) and interviewing is given twice with an analyzed using the representation indikator and the problem solving step. The results showed that: the stage of presenting information known, stage of devising a plan, and stage of carrying out the plan those three subjects were using same form of representation. While he stage of presenting information asked and stage of looking back, subject of logical-mathematic was using different forms of representation with subjects of musical and naturalist intelligence. From this research is expected to provide input to the teacher in determining the learning strategy that will be used by considering the representation of students with the basis of multiple intelligences.

Reagan's energy war: can deregulation and the Pentagon save the nuclear industry

International Nuclear Information System (INIS)

Feeney, A.

1981-01-01

Mr. Feeney feels that Administration energy policies claiming to protect democracy and reduce government interference will transfer money and political control from the people to the energy corporations and the Pentagon. Critics deplore the hard-path approach of downgrading conservation and solar energy in favor of nuclear energy, which some see as setting the stage for a nuclear war in this decade. They see the plan to abolish DOE as providing an opportunity to bail out the nuclear industry, bury environmental and alternative energy research, and block regulations. Critics question why Reagan's devotion to the free market is not applied to the nuclear industry, although they disagree on the linkage with nuclear weapons of new fuel cycle proposals and the use of national security to solve the waste disposal problem by nationalizing and militarizing the fuel cycle

Behaviour planning and problem solving deficiencies in children ...

African Journals Online (AJOL)

Objective: To compare planning behaviour (frontal lobe functioning) in children with and without symptoms of attention deficit hyperactivity disorder (ADHD). Method: A total of 90 children (45 with symptoms of ADHD and 45 matched controls without ADHD symptoms) of both genders, who were medication naïve, from the ...

Developing Instructional Mathematical Physics Book Based on Inquiry Approach to Improve Students’ Mathematical Problem Solving Ability

Directory of Open Access Journals (Sweden)

Syarifah Fadillah

2017-03-01

Full Text Available The problem in this research is to know how the process of developing mathematics physics instructional book based on inquiry approach and its supporting documents to improve students' mathematical problem-solving ability. The purpose of this research is to provide mathematical physics instruction based on inquiry approach and its supporting documents (semester learning activity plan, lesson plan and mathematical problem-solving test to improve students' mathematical problem-solving ability. The development of textbook refers to the ADDIE model, including analysis, design, development, implementation, and evaluation. The validation result from the expert team shows that the textbook and its supporting documents are valid. The test results of the mathematical problem-solving skills show that all test questions are valid and reliable. The result of the incorporation of the textbook in teaching and learning process revealed that students' mathematical problem-solving ability using mathematical physics instruction based on inquiry approach book was better than the students who use the regular book.

Challenges of increasing competetiveness of Serbian agro-industry in the process of mitigation of emergency situation

Directory of Open Access Journals (Sweden)

Domazet Siniša

2016-01-01

Full Text Available Protection of agro-industry in emergency situations is of vital importance for economic and social development of a country. This paper is therefore created with a view of assessing the degree of resilience of economic entities within agro-industrial sector in the Autonomous Province (AP of Vojvodina and partially in the Republic of Serbia in emergency situations, so that measures to increase their competitiveness could be undertaken. The methods adequate for social sciences were used: positive law method, logical induction and deduction, multidisciplinary approach, as well as statistical method. The research established that the economic entities mainly have their own fire rescue and procedure plans, but not emergency action plans. Special financial assets have not been allocated for that purpose either. Businessmen are not acquainted with the existence of ISO 22301:2012 standard, which may be exceptionally useful in solving this problem. The degree of resilience of economic entities in the AP of Vojvodina in emergency situations is 64.2%. It is necessary in the forthcoming period to improve the implementation of regulations, particularly in the field of emergency action plans, but also the possibilities to implement ISO 22301:2012 standard.

Incorporating emergency evacuation planning, through human reliability analysis, in the risk management of industrial installation

Energy Technology Data Exchange (ETDEWEB)

Santos, Isaac J.A. Luquetti; Carvalho, Paulo V.R.; Grecco, Claudio H.S. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)], Email: luquetti@ien.gov.br

2009-07-01

An industrial installation presents many risks in the form of the process hazards, such as fire, explosion, gas and radiation release. In these situations, workers may need to evacuate from the work environment as soon as possible. In this case, the emergency evacuation planning is a key element that involves an iterative process to identify the best evacuation routes and to estimate the time required to evacuate the area at risk. The mean aspects for a successful emergency evacuation are influenced by the type of human error and the severity of the initiator event. The aim of this paper is to present a methodological framework for the identification of the performance shaping factors and prediction of human error probabilities of the responsible by the emergency evacuation of the workers in an industrial installation, providing a proactive approach for the allocation of the human factors in the risk assessment of the industrial installation. (author)

Issues in the Planning and Design of a Bilingual (English–Northern Sotho Explanatory Dictionary for Industrial Electronics

Directory of Open Access Journals (Sweden)

Elsabé Taljard

2011-10-01

Full Text Available

Abstract: The focus of this article is the planning and design of a bilingual, explanatory dictionary for industrial electronics with a clearly delimited and very specific target user in mind. Since the number of lemmas to be treated in the dictionary is limited to 500, special care must be taken to select those lemmas that are relevant for both the purpose of the dictionary and the needs of the target user. It is indicated that the main consideration in the planning of the envisaged dictionary is user-friendliness, as dictated by the intended target users. In this article, a novel approach to the semi-automatic selection of lemmas for inclusion in an LSP dictionary is described. The procedure that is used for the extraction of definitional information from an electronic corpus is also explained.

Keywords: LSP LEXICOGRAPHY, DICTIONARY PLANNING, LEMMA SELECTION, SEMI-AUTOMATIC TERM EXTRACTION, DEFINITIONAL INFORMATION, INDUSTRIAL ELEC-TRONICS, CORPUS-BASED LEXICOGRAPHY

Opsomming: Kwessies by die beplanning en ontwerp van 'n tweetalige (Engels–Noord-Sotho verklarende woordeboek vir industriële elektronika. Die fokus van hierdie artikel is die beplanning en ontwerp van 'n tweetalige, verklarende woorde-boek vir industriële elektronika met 'n duidelik afgebakende en baie spesifieke teikengebruiker in gedagte. Aangesien die getal lemmas vir behandeling in die woordeboek tot 500 beperk is, moet besondere sorg gedra word dat daardie lemmas gekies word wat beantwoord aan die doel van die woordeboek én die behoeftes van die teikengebruiker. Daar word uitgewys dat die hoofoorweging in die beplanning van die beoogde woordeboek gebruikersvriendelikheid is, soos bepaal deur die bestemde teikengebruikers. In hierdie artikel word 'n nuwe benadering tot die semi-outomatiese keuse van lemmas vir insluiting in 'n vakwoordeboek beskryf. Die prosedure wat vir die onttrek-king van definisiële inligting uit 'n elektroniese korpus gebruik word

Industry's use of electric power

International Nuclear Information System (INIS)

1986-10-01

Alternative energy supplies and adaptation to energy demand are elucidated, primarily concerning space heating and industry. The consequences of the alternatives on the economic development of Sweden, the growth of industry, the situation of households and the effects of health and environment are being analysed. It is concluded that considerable portions of the industry will loose their competitive advantages. There will be restricted possibilities to solve the technical adaptation to the year 1997

Mediation in matters of environmental policy and industrial project planning. Theory and case reports; Umweltmediation in Theorie und Anwendung

Energy Technology Data Exchange (ETDEWEB)

Oppermann, B.; Langer, K.

2000-07-01

The guidebook is intended for regional or local decision-making bodies from industry and society, politics and administration involved in the planning, organisation and performance of public hearings in the context of industrial project planning, technology assessment and compliance with environmental policy and requirements. Participation of the public and conflict resolution are essential aspects of the guidebook which is one in a series of existing and planned publications on a variety of issues of public interest. (orig./CB) [German] Im Bereich technik- und umeltrelevanter Planungen werden immer haeufiger neue Formen der Buergerbeteiligung diskutiert. Die Akademie fuer Technikfolgenabschaetzung in Baden-Wuerttemberg hat es sich seit einigen Jahren zur Aufgabe gemacht, innovative Verfahren der diskursiven Verstaendigung und Konfliktloesung zu erproben und weiterzuentwickeln. Es zeigte sich, dass ein grosser Bedarf nach allgemeinverstaendlichen Praxisanleitungen besteht, so dass die Akademie begonnen hat, Praxis-Leitfaeden z.B. fuer regionale und lokale Entscheidungstraeger aus Politik, Verwaltung, Wirtschaft und Gesellschaft zu erarbeiten, als Hilfestellung bei Planung, Organisation und Durchfuehrung der vorgeschriebenen Verfahren. Neben dem vorliegenden Leitfaden sind auch weitere zu anderen Themen schon erschienen oder in Planung. (orig./CB)

Solving the Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Askelsdottir, Björg; Jensen, Rune Møller

2015-01-01

We solve a central problem in the liner shipping industry called the liner shipping fleet repositioning problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between routes in a liner shipping network. Liner carriers wish...

Teaching problem-solving skills to nuclear engineering students

Science.gov (United States)

Waller, E.; Kaye, M. H.

2012-08-01

Problem solving is an essential skill for nuclear engineering graduates entering the workforce. Training in qualitative and quantitative aspects of problem solving allows students to conceptualise and execute solutions to complex problems. Solutions to problems in high consequence fields of study such as nuclear engineering require rapid and accurate analysis of the problems, design of solutions (focusing on public safety, environmental stewardship and ethics), solution execution and monitoring results. A three-month course in problem solving, modelling and simulation was designed and a collaborative approach was undertaken with instructors from both industry and academia. Training was optimised for the laptop-based pedagogy, which provided unique advantages for a course that includes modelling and simulation components. The concepts and tools learned as part of the training were observed to be utilised throughout the duration of student university studies and interviews with students who have entered the workforce indicate that the approaches learned and practised are retained long term.

Psychosocial dimensions of solving an indoor air problem.

Science.gov (United States)

Lahtinen, Marjaana; Huuhtanen, Pekka; Kähkönen, Erkki; Reijula, Kari

2002-03-01

This investigation focuses on the psychological and social dimensions of managing and solving indoor air problems. The data were collected in nine workplaces by interviews (n = 85) and questionnaires (n = 375). Indoor air problems in office environments have traditionally utilized industrial hygiene or technical expertise. However, indoor air problems at workplaces are often more complex issues to solve. Technical questions are inter-related with the dynamics of the work community, and the cooperation and interaction skills of the parties involved in the solving process are also put to the test. In the present study, the interviewees were very critical of the process of solving the indoor air problem. The responsibility for coordinating the problem-managing process was generally considered vague, as were the roles and functions of the various parties. Communication problems occurred and rumors about the indoor air problem circulated widely. Conflicts were common, complicating the process in several ways. The research focused on examining different ways of managing and resolving an indoor air problem. In addition, reference material on the causal factors of the indoor air problem was also acquired. The study supported the hypothesis that psychosocial factors play a significant role in indoor air problems.

Should My Unemployment Problem Be Solved by Others?

Directory of Open Access Journals (Sweden)

Dušanka Lužar

1996-12-01

Full Text Available Through implementation of various forms of group and individual counselling, and team approach, the Employment Agency is achieving its goal, stating that the involvement of every individual in employment programmes should be defined by his or her planned career. This basically means that the unemployed should be motivated to actively engage in planning their careers and in seeking for employment. In order to enable individuals to assess their abilities and prepare to present themselves to potential employers, the Agency has designed a workshop entitled "Ways to work and jobs". Its primary target is motivating the participants for solving the problem of work and employment. Individuals too often believe that their employment problems should be solved by third parties instead of assuming personal responsibility. Many of the unemployed think that they are in dire straits; they need to be dissuaded, shown that the seemingly hopeless situation is a mere misconception , and that unemployment is in a way a trial which might lead to a better, more fulfilling period of life and work.

Recent Trends in Japanese Mathematics Textbooks for Elementary Grades: Supporting Teachers to Teach Mathematics through Problem Solving

Science.gov (United States)

Takahashi, Akihiko

2016-01-01

Problem solving has been a major theme in Japanese mathematics curricula for nearly 50 years. Numerous teacher reference books and lesson plans using problem solving have been published since the 1960s. Government-authorized mathematics textbooks for elementary grades, published by six private companies, have had more and more problem solving over…

Strategic Planning and Online Learning

Science.gov (United States)

McLaughlin-Graham, Karen; Berge, Zane L.

2005-01-01

Strategic planning is a critical part of sustaining distance education. Through such planning, the organization can solve business problems that involve training and education in an effective and often cost savings manner compared to in-person training efforts. This paper examines the strategic planning process as it relates to sustaining distance…

Divide et impera: subgoaling reduces the complexity of probabilistic inference and problem solving.

Science.gov (United States)

Maisto, Domenico; Donnarumma, Francesco; Pezzulo, Giovanni

2015-03-06

It has long been recognized that humans (and possibly other animals) usually break problems down into smaller and more manageable problems using subgoals. Despite a general consensus that subgoaling helps problem solving, it is still unclear what the mechanisms guiding online subgoal selection are during the solution of novel problems for which predefined solutions are not available. Under which conditions does subgoaling lead to optimal behaviour? When is subgoaling better than solving a problem from start to finish? Which is the best number and sequence of subgoals to solve a given problem? How are these subgoals selected during online inference? Here, we present a computational account of subgoaling in problem solving. Following Occam's razor, we propose that good subgoals are those that permit planning solutions and controlling behaviour using less information resources, thus yielding parsimony in inference and control. We implement this principle using approximate probabilistic inference: subgoals are selected using a sampling method that considers the descriptive complexity of the resulting sub-problems. We validate the proposed method using a standard reinforcement learning benchmark (four-rooms scenario) and show that the proposed method requires less inferential steps and permits selecting more compact control programs compared to an equivalent procedure without subgoaling. Furthermore, we show that the proposed method offers a mechanistic explanation of the neuronal dynamics found in the prefrontal cortex of monkeys that solve planning problems. Our computational framework provides a novel integrative perspective on subgoaling and its adaptive advantages for planning, control and learning, such as for example lowering cognitive effort and working memory load. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Student’s thinking process in solving word problems in geometry

Science.gov (United States)

Khasanah, V. N.; Usodo, B.; Subanti, S.

2018-05-01

This research aims to find out the thinking process of seventh grade of Junior High School in solve word problem solving of geometry. This research was descriptive qualitative research. The subject of the research was selected based on sex and differences in mathematical ability. Data collection was done based on student’s work test, interview, and observation. The result of the research showed that there was no difference of thinking process between male and female with high mathematical ability, and there were differences of thinking process between male and female with moderate and low mathematical ability. Also, it was found that male with moderate mathematical ability took a long time in the step of making problem solving plans. While female with moderate mathematical ability took a long time in the step of understanding the problems. The importance of knowing the thinking process of students in solving word problem solving were that the teacher knows the difficulties faced by students and to minimize the occurrence of the same error in problem solving. Teacher could prepare the right learning strategies which more appropriate with student’s thinking process.

Implications of land and resource management planning for the oil and gas industry in B.C

International Nuclear Information System (INIS)

Thompson, D.; Mitchell, W.

1998-01-01

An overview of the land use planning work underway in British Columbia and its impact on the oil and gas industry was presented. The plans are to double the park and protected areas in the province. Historically, parks in the province were designated on the basis of advice from technical staff with a small amount of public consultation. Today, public debate about the establishment of new protected areas has made several significant several changes to the decision-making process in British Columbia. The result is a process that although complex, provides better understanding between industry, environmental interests and government. As an illustration of the effectiveness of this process, the issue of finding innovative solutions to resource development interests while respecting environmental values, such as the management objectives for the Muskwa Kechika Area in northeast British Columbia, and the opportunity for directional oil and gas drilling under selected new protected areas were discussed. Application of the process was also demonstrated in discussing the two sub-regional Land and Resource Management Plans (LRMP) in Fort Nelson and Fort St. John, which cover a remote wild area of almost fourteen and a half million hectares in the northeast corner of the province. The economy of the region is based on agriculture, natural gas exploration and development, forest products, and nature based tourism. The LRMP process allowed the government to consider and accept the concept of directional drilling under some new protected areas as long as there were no surface disturbances

Recent Movement, Issues and Some Counter plans in Nuclear Industry

International Nuclear Information System (INIS)

Lee, S. K.; Lee, J. K.; Cho, C. S.; Lee, C. C.; Park, C. O.

2007-01-01

There is no doubt 'Nuclear Energy' is the only source that can ensure the world's steady development in the foreseeable future. Nowadays is definitely what is called 'renaissance of nuclear.' As energy demand and economy increase, and global climate warms, the trend of nuclear dependency will be accelerated further. With 30 reactors being built around the world today, another 35 or more planned to come online during the next 10 years, and over two hundred further back in the pipeline, the global nuclear industry is clearly going forward strongly. Countries are seeking to replace old reactors as well as expand capacity, and an additional 25 countries are either considering or have already decided to make nuclear energy part of their power generation capacity. On the other hand, as current movement of world nuclear field, Korea has faced to one of the most important times since introducing nuclear power. Twenty nuclear power plants are run in Korea i.e. sixteen PWRs and four PHWRs now, and the capability of nuclear power production has been ranked world number six. In spite of this grand appearance, however, the influencing power on world nuclear society is not well matched to its status since it does not have a special hidden card which can appeal and impact on international community. In the era of nuclear renaissance, paradoxically, Korea is not in the situations of optimistic or pessimistic view. Now let's As energy demand and economy increase, and global climate warms, the trend of nuclear dependency will be accelerated further. With 30 reactors being built around the world today, another 35 or more planned to come online during the next 10 years, and over two hundred further back in the pipeline, the global nuclear industry is clearly going forward strongly. Countries are seeking to replace old reactors as well as expand capacity, and an additional 25 countries are either considering or have already decided to make nuclear energy part of their power generation

A goal programming procedure for solving fuzzy multiobjective fractional linear programming problems

Directory of Open Access Journals (Sweden)

Tunjo Perić

2014-12-01

Full Text Available This paper presents a modification of Pal, Moitra and Maulik's goal programming procedure for fuzzy multiobjective linear fractional programming problem solving. The proposed modification of the method allows simpler solving of economic multiple objective fractional linear programming (MOFLP problems, enabling the obtained solutions to express the preferences of the decision maker defined by the objective function weights. The proposed method is tested on the production planning example.

The nuclear industry's plan to achieve new nuclear power plant orders in the 1990's

International Nuclear Information System (INIS)

Bayne, P.

1993-01-01

Since the Arab Oil Embargo of 1973, there has been a direct relationship between the growth in the Gross Domestic Product and the growth in the use of electricity in the United States. That close relationship between economic growth and electricity will continue. If that is true, the United States Department of Energy says this country will need between 190,000 to 275,000 megawatts of new generating capacity in the next 20 years. Electricity is one of the cleanest and most efficient uses of energy. Of all the ways to generate electricity, nuclear power plants are the cleanest, producing no air pollution and no greenhouse gases. To help supply the needed increase in electricity generating capacity, the US nuclear power industry has developed a Strategic Plan for Building New Nuclear Power Plants. The plan identified fourteen issues which must be dealt with to create the conditions under which utilities could place orders for new nuclear plants by the mid-1990's. The plan was published in November of 1990 and significant progress has been made on most of the fourteen issues. The plan and progress made are reviewed in depth

SIMULATION OF CARS ACCUMULATION PROCESSES FOR SOLVING TASKS OF OPERATIONAL PLANNING IN CONDITIONS OF INITIAL INFORMATION UNCERTAINTY

Directory of Open Access Journals (Sweden)

О. A. Tereshchenko

2017-06-01

Full Text Available Purpose. The article highlights development of the methodological basis for simulation the processes of cars accumulation in solving operational planning problems under conditions of initial information uncertainty for assessing the sustainability of the adopted planning scenario and calculating the associated technological risks. Methodology. The solution of the problem under investigation is based on the use of general scientific approaches, the apparatus of probability theory and the theory of fuzzy sets. To achieve this purpose, the factors influencing the entropy of operational plans are systematized. It is established that when planning the operational work of railway stations, sections and nodes, the most significant factors that cause uncertainty in the initial information are: a external conditions with respect to the railway ground in question, expressed by the uncertainty of the timing of cars arrivals; b external, hard-to-identify goals for the functioning of other participants in the logistics chain (primarily customers, expressed by the uncertainty of the completion time with the freight cars. These factors are suggested to be taken into account in automated planning through statistical analysis – the establishment and study of the remaining time (prediction errors. As a result, analytical dependencies are proposed for rational representation of the probability density functions of the time residual distribution in the form of point, piecewise-defined and continuous analytic models. The developed models of cars accumulation, the application of which depends on the identified states of the predicted incoming car flow to the accumulation system, are presented below. In addition, the last proposed model is a general case of models of accumulation processes with an arbitrary level of reliability of the initial information for any structure of the incoming flow of cars. In conclusion, a technique for estimating the results of

The Novel of Six axes Robotic Arm for Industrial Applications

Directory of Open Access Journals (Sweden)

Rajendra R Aparnathi

2014-05-01

Full Text Available Automation technology is widely accepted and rapidly growing technology in the field of core and many other industries. Anyone can observe that due to these problems many industries are turning towards automaton. When searching for problem of labor manpower in middle-case industries, we came to know about many other things like production, speed of manufacturing and quality of the product are necessary in the current scenario. These parameters are not being well maintained in incorporate industries with manual manufacturing processes instead of using automatic system. Our objective is to solve these problems by efficient use of different technologies for making an industry fully or partially automated. By using technologies we can try to solve or reduce the effects of above problems.

The Educational Film Industry

Science.gov (United States)

Tortora, Vincent R.; Schillaci, Peter

1975-01-01

Increased dialog is needed among educational film producers, distributors, and consumers in order to be sure that what is being produced meets educators' needs and also to help solve the financial problems of the film industry. (LS)

Planning and Design: A Systems Approach.

Science.gov (United States)

Bozeman, William C.; Clements, Mary A.

1981-01-01

Explains "purpose design," a planning and problem-solving strategy involving determination of planning purposes, generation and selection of solutions, specification of solution details, implementation, and evaluation. Describes the application of purpose design to the planning of an alumni association at Black Hawk College, a community…

Marine spill response planning for the non-persistent oil transportation industry in Alaska

International Nuclear Information System (INIS)

Taylor, E.; Egland, L.

1998-01-01

The unique difficulties that face oil spill response planning for the oil transportation industry in Alaska were discussed. Three levels of response strategies and actions proposed by the Alaska Petroleum Distributors and Transporters (APD and T) member companies were reviewed. They were: (1) immediate response (on-board resources), (2) in-region response (caches in Subareas), and (3) out-of-region cascaded resources (from Anchorage and other sources). The strategies and levels of capability were proposed as emergency measures in addition to the more important prevention measures already instituted to prevent discharges of non-persistent oil. 5 refs., 2 tabs., 9 figs

Behaviour planning and problem solving deficiencies in children with symptoms of attention deficit hyperactivity disorder from the Balobedu culture, Limpopo province, South Africa.

Science.gov (United States)

Pila-Nemutandani, Refilwe Gloria; Meyer, Anneke

2016-07-01

To compare planning behaviour (frontal lobe functioning) in children with and without symptoms of attention deficit hyperactivity disorder (ADHD). A total of 90 children (45 with symptoms of ADHD and 45 matched controls without ADHD symptoms) of both genders, who were medication naïve, from the Balobedu culture (Limpopo province, South Africa), aged 7-13 years, participated in the study. The performance of the two groups was compared on a test of planning and problem solving, the Tower of London (ToL) task. The results were analysed as a function of gender and ADHD subtype. The Finger Tapping test (testing fine motor skills) was used as a control test to verify that the expected differences were not due to poor motor skills. The children with ADHD symptoms scored significantly lower than the non-ADHD comparison group which indicated deficiency in frontal lobe functioning (p = 0.00). The difference in performance was not due to poor motor control (p = 0.70). Children with ADHD symptoms show deficits in behavioural planning which indicates impairment of functions of the frontal areas supplied by the mesocortical dopamine branch. More so than others, the ADHD Inattentive and Combined subtypes showed poor performance in the Tower of London task, indicating poor organisational and planning skills in these groups. The results also did show that the difference was not due to problems with motor control and that the ToL task is a culture-fair instrument for testing planning behaviour.

Importance of Advanced Planning of Manufacturing for Nuclear Industry

Directory of Open Access Journals (Sweden)

Shykinov Nick

2016-06-01

Full Text Available In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

Solved problems in electrochemistry

International Nuclear Information System (INIS)

Piron, D.L.

2004-01-01

This book presents calculated solutions to problems in fundamental and applied electrochemistry. It uses industrial data to illustrate scientific concepts and scientific knowledge to solve practical problems. It is subdivided into three parts. The first uses modern basic concepts, the second studies the scientific basis for electrode and electrolyte thermodynamics (including E-pH diagrams and the minimum energy involved in transformations) and the kinetics of rate processes (including the energy lost in heat and in parasite reactions). The third part treats larger problems in electrolysis and power generation, as well as in corrosion and its prevention. Each chapter includes three sections: the presentation of useful principles; some twenty problems with their solutions; and, a set of unsolved problems

AN APPROACH TO FINANCIAL RISK IN A PORTFOLIO FOR PLANNING THE INDUSTRIAL PRODUCTION OF PRODUCTS DERIVED FROM SUGARCANE

Directory of Open Access Journals (Sweden)

Thárcylla R.N. Clemente

2015-12-01

Full Text Available ABSTRACT Brazil's location and tropical weather conditions are favourable cultivating sugarcane, which has led to Brazil being one of the world's largest producers of sugarcane. The influence of the sugarcane industry on its economy stands out among the indicators of Brazilian economic growth and because the diversified investment when planning the production of products derived from this sector is encouraged. The decision on which derivative (for example, crystal sugar, anhydrous ethanol, or hydrous ethanol to produce from raw sugarcane can be modelled as an investment decision in a portfolio decision problem whenever a combination of these products is considered. As to the future price of these commodities, raw sugarcane is considered to be capital that should be invested. Thus, this paper puts forward a decision model which uses concepts from Decision Analysis and Bayesian Risk Analysis that may well assist the process of managing assets in the Brazilian sugarcane industry by considering the financial aspect when compiling a portfolio for planning production.

DMAIC Application and Fault Analysis of Metal Packaging in the Canning Industry

Directory of Open Access Journals (Sweden)

Rafael Santos de Souza

2017-11-01

Full Text Available In the food industry, quality assurance is strongly associated with consumer safety and the risk of compromising the purity of products. Specifically, in the canning industries, rusty, dented or bulging cans may contain bacteria and cause foodborne illness. This article discusses the application of DMAIC and failure analysis to reduce the number of crushed cans in a canning industry. The methodology was of an applied nature, with an exploratory objective, a qualitative and quantitative approach and a case study method used. Through statistical analysis, it was found that the amount of dented packaging in the production process, which comprises the steps of filling, seaming and basketing, was high. The step with the highest number of crushed cans between three stages was seaming. This was followed by the application of FMEA failure analysis related to the use of an automated seaming machine. Finally, an action plan was roposed to solve the problem of cans crushed in the seaming step and the results demonstrate the improvements obtained before the target after 4 months (August-November 2015.

Solving Differential Equations in R: Package deSolve

Science.gov (United States)

In this paper we present the R package deSolve to solve initial value problems (IVP) written as ordinary differential equations (ODE), differential algebraic equations (DAE) of index 0 or 1 and partial differential equations (PDE), the latter solved using the method of lines appr...

The uranium industry: long-term planning for short-term competition

International Nuclear Information System (INIS)

Vottero, X.; Georges Capus, G.

2001-01-01

Long term planning for short term competition Today, uranium producers face new challenges in terms of both production (new regulatory, environmental and social constraints) and market conditions (new sources of uranium supply, very low prices and tough competition). In such a context, long-term planning is not just a prerequisite to survive in the nuclear fuel cycle industry. In fact, it also contributes to sustaining nuclear electricity generation facing fierce competition from other energy sources in increasingly deregulated markets. Firstly, the risk of investing in new mining projects in western countries is growing because, on the one hand, of very erratic market conditions and, on the other hand, of increasingly lengthy, complex and unpredictable regulatory conditions. Secondly, the supply of other sources of uranium (uranium derived from nuclear weapons, uranium produced in CIS countries, ...) involve other risks, mainly related to politics and commercial restrictions. Consequently, competitive uranium supply requires not only technical competence but also financial strength and good marketing capabilities in order to anticipate long-term market trends, in terms of both demand and supply. It also requires taking into account new parameters such as politics, environment, regulations, etc. Today, a supplier dedicated to the sustainable production of nuclear electricity must manage a broad range of long-term risks inherent to the procurement of uranium. Taking into account all these parameters in a context of short-term, fast-changing market is a great challenge for the future generation. World Uranium Civilian Supply and Demand. (authors)

Age differences in everyday problem-solving effectiveness: older adults select more effective strategies for interpersonal problems.

Science.gov (United States)

Blanchard-Fields, Fredda; Mienaltowski, Andrew; Seay, Renee Baldi

2007-01-01

Using the Everyday Problem Solving Inventory of Cornelius and Caspi, we examined differences in problem-solving strategy endorsement and effectiveness in two domains of everyday functioning (instrumental or interpersonal, and a mixture of the two domains) and for four strategies (avoidance-denial, passive dependence, planful problem solving, and cognitive analysis). Consistent with past research, our research showed that older adults were more problem focused than young adults in their approach to solving instrumental problems, whereas older adults selected more avoidant-denial strategies than young adults when solving interpersonal problems. Overall, older adults were also more effective than young adults when solving everyday problems, in particular for interpersonal problems.

The Modern Management of Urban Planning and the Controlling Planning

Institute of Scientific and Technical Information of China (English)

1991-01-01

<正> Since 1980s,with the further reform of political and economic systems,the urban construc-tion in our country has undergone great changes,greater than ever.Such changes pose a series ofnew problems to urban planning:How should planning be suitable for the development of moderncities?How should planning management coordinate with urban planning?How to carry out ur-ban planning under new situations? etc.The answers to these problems lie in one point:urbanplanning and plann ing management must be restructured.Only when the former is well com-bined with the latter can the above problems be solved satisfactorily.This article provides someviews in this respect.

Towards preventative eco-industrial development: an industrial and urban symbiosis case in one typical industrial city in China

DEFF Research Database (Denmark)

Dong, Liang; Fujita, Tsuyoshi; Dai, Ming

2016-01-01

situation. In order to investigate the eco-benefits of eco-industrial development in China, this study focused on an industrial and urban symbiosis case of Guiyang city in which process synergy, municipal solid wastes recycling and waste energy utilization were incorporated in this typical industrial city...... policy implications to address the barriers of promoting industrial and urban symbiosis were proposed. This study is critical for future industrial and urban planning policy making and shed a light on innovative eco-industrial development in China....

Solving Differential Equations in R: Package deSolve

NARCIS (Netherlands)

Soetaert, K.E.R.; Petzoldt, T.; Setzer, R.W.

2010-01-01

In this paper we present the R package deSolve to solve initial value problems (IVP) written as ordinary differential equations (ODE), differential algebraic equations (DAE) of index 0 or 1 and partial differential equations (PDE), the latter solved using the method of lines approach. The

Assembly Line Productivity Assessment by Comparing Optimization-Simulation Algorithms of Trajectory Planning for Industrial Robots

Directory of Open Access Journals (Sweden)

Francisco Rubio

2015-01-01

Full Text Available In this paper an analysis of productivity will be carried out from the resolution of the problem of trajectory planning of industrial robots. The analysis entails economic considerations, thus overcoming some limitations of the existing literature. Two methodologies based on optimization-simulation procedures are compared to calculate the time needed to perform an industrial robot task. The simulation methodology relies on the use of robotics and automation software called GRASP. The optimization methodology developed in this work is based on the kinematics and the dynamics of industrial robots. It allows us to pose a multiobjective optimization problem to assess the trade-offs between the economic variables by means of the Pareto fronts. The comparison is carried out for different examples and from a multidisciplinary point of view, thus, to determine the impact of using each method. Results have shown the opportunity costs of non using the methodology with optimized time trajectories. Furthermore, it allows companies to stay competitive because of the quick adaptation to rapidly changing markets.

Physical activity promotion in business and industry: evidence, context, and recommendations for a national plan.

Science.gov (United States)

Pronk, Nicolaas P

2009-11-01

The contemporary workplace setting is in need of interventions that effectively promote higher levels of occupational and habitual physical activity. It is the purpose of this paper to outline an evidence-based approach to promote physical activity in the business and industry sector in support of a National Physical Activity Plan. Comprehensive literature searches identified systematic reviews, comprehensive reviews, and consensus documents on the impact of physical activity interventions in the business and industry sector. A framework for action and priority recommendations for practice and research were generated. Comprehensive, multicomponent work-site programs that include physical activity components generate significant improvements in health, reduce absenteeism and sick leave, and can generate a positive financial return. Specific evidence-based physical activity interventions are presented. Recommendations for practice include implementing comprehensive, multicomponent programs that make physical activity interventions possible, simple, rewarding and relevant in the context of a social-ecological model. The business and industry sector has significant opportunities to improve physical activity among employees, their dependents, and the community at-large and to reap important benefits related to worker health and business performance.

Development Framework for Agro-Based Industries in Secondary Cities of Sindh Province, Pakistan: SWOT Analysis of Ten-Year Perspective and Medium-Term Development Framework Plans

Directory of Open Access Journals (Sweden)

Saima Kalwar

2018-04-01

Full Text Available The study intended to explore planning strategies gaps in ten-year perspective and medium-term development framework plans for agro-based industrial development in secondary cities of Sindh Province, Pakistan. Document review and key informant interviews survey techniques were used for data collection. A total of 30 interviews were conducted from agro-based officials. The SWOT analysis technique was applied for data analysis. The results revealed the weaknesses of high priority for textile and sugar industries, lack of planning strategies for agro-based development in secondary cities, dependency on federal government for development funds and absence of finances to implement plans. The threats were unavailability of strategic agro-based infrastructure facilities in secondary cities, centralized planning system, cross border threats such as the war in Afghanistan and migration of Afghan refugees, weak law and order situation and diversion of development budget for defense activities. The study suggests decentralization of powers and robust planning strategies in the development plans to strengthen secondary cities of Sindh Province economically.

West Valley Demonstration Project community relations plan FY 1990/91

International Nuclear Information System (INIS)

Damerow, M.W.

1989-09-01

The purpose of the Community Relations Plan is to fully inform the community about the West Valley Demonstration Project (WVDP) and provide opportunities for public input. A sound approach to community relations is essential to the creation and maintenance of public awareness and community support. The WVDP is a matter of considerable public interest because it deals with nuclear waste. The mission of the WVDP is to solve an existing environmental concern by solidifying high-level radioactive waste and transporting the solidified waste to a federal repository for permanent disposal. The public requires evidence of the continued commitment and demonstrated progress of the industry and government in carrying out the mission in order to sustain confidence that the WVDP is being managed well and will be discussed successfully completed. For this reason, a comprehensive communication plan is essential for the successful completion of the WVDP

Improving of Junior High School Visual Thinking Representation Ability in Mathematical Problem Solving by CTL

Science.gov (United States)

Surya, Edy; Sabandar, Jozua; Kusumah, Yaya S.; Darhim

2013-01-01

The students' difficulty which was found is in the problem of understanding, drawing diagrams, reading the charts correctly, conceptual formal mathematical understanding, and mathematical problem solving. The appropriate problem representation is the basic way in order to understand the problem itself and make a plan to solve it. This research was…

Developing Physics Concepts through Hands-On Problem Solving: A Perspective on a Technological Project Design

Science.gov (United States)

Hong, Jon-Chao; Chen, Mei-Yung; Wong, Ashley; Hsu, Tsui-Fang; Peng, Chih-Chi

2012-01-01

In a contest featuring hands-on projects, college students were required to design a simple crawling worm using planning, self-monitoring and self-evaluation processes to solve contradictive problems. To enhance the efficiency of problem solving, one needs to practice meta-cognition based on an application of related scientific concepts. The…

Design and application of mathematical model for strategic planning of technology transfer in Iran's packaging industries company (I.P.I.C)

International Nuclear Information System (INIS)

Aliahmadi, A.

2001-01-01

Selecting right strategies for technology transfer and R and D projects is vital for developing countries. A number of researchers have di sussed the problem and applied different techniques, such as Engineering Economics Analysis, Ranking Methods, Goal Programming, Integer Programming and Analytical Hierarchy Process, to this problem. They haven't discussed the problems of developing countries in their models from a strategic planning point of view. In this paper the model of Moore and Ghand-Foruch is used and developed to improve the strategic planning for technology acquisition in developing countries. The proposed model consists of two phases, in which the first phase deals with calculating the utility of different strategies, policies and programs by considering critical, quantitative and qualitative factors. The second phase optimizes the total utility of strategic planning by using Mixed Integer Linear Programming while considering the constraints on budget, manpower, time etc. At the end, the result of application of the model in an Iranian industry (Iran's Packaging Industries Company) is discussed

W-algebra for solving problems with fuzzy parameters

Science.gov (United States)

Shevlyakov, A. O.; Matveev, M. G.

2018-03-01

A method of solving the problems with fuzzy parameters by means of a special algebraic structure is proposed. The structure defines its operations through operations on real numbers, which simplifies its use. It avoids deficiencies limiting applicability of the other known structures. Examples for solution of a quadratic equation, a system of linear equations and a network planning problem are given.

An Energy Efficiency Evaluation Method Based on Energy Baseline for Chemical Industry

Directory of Open Access Journals (Sweden)

Dong-mei Yao

2016-01-01

Full Text Available According to the requirements and structure of ISO 50001 energy management system, this study proposes an energy efficiency evaluation method based on energy baseline for chemical industry. Using this method, the energy plan implementation effect in the processes of chemical production can be evaluated quantitatively, and evidences for system fault diagnosis can be provided. This method establishes the energy baseline models which can meet the demand of the different kinds of production processes and gives the general solving method of each kind of model according to the production data. Then the energy plan implementation effect can be evaluated and also whether the system is running normally can be determined through the baseline model. Finally, this method is used on cracked gas compressor unit of ethylene plant in some petrochemical enterprise; it can be proven that this method is correct and practical.

A new impetus for developing industrial process heat applications of HTR in europe - HTR2008-58259

International Nuclear Information System (INIS)

Hittner, D.; De Groot, S.; Griffay, G.; Yvon, P.; Pienkowski, L.; Ruer, J.; Angulo, C.; Laquaniello, G.

2008-01-01

Due to its high operating temperature (up to 850 deg. C with present technologies, possibly higher in the longer term), and its power range (a few hundred MW), the modular HTR could address a larger scope of industrial process heat needs than other present nuclear systems. Even if HTR can contribute to competitive electricity generation, this potential for industrial heat applications is the main incentive for developing this type of reactor, as it could open to nuclear energy a large non-electricity market. However several issues must be addressed and solved successfully for HTR to actually enter the market of industrial process heat: 1) as an absolute prerequisite, to develop a strategic alliance of nuclear industry and R and D with process heat user industries. 2) to solve some key technical issues, as for instance the design of a reactor and of a coupling system flexible enough to reconcile a single reactor design with multiple applications and versatile requirements for the heat source, and the development of special adaptations of the application processes or even of new processes to fit with the assets and constraints of HTR heat supply, 3) to solve critical industrial issues such as economic competitiveness, availability and 4) to address the licensing issues raised by the conjunction of nuclear and industrial risks. In line with IAEA initiatives for supporting non-electric applications of nuclear energy and with the orientations of the SET-Plan of the European Commission, the (European) HTR Technology Network (HTR-TN) proposes a new project, together with industrial process heat user partners, to provide a first impetus to the strategic alliance between nuclear and non-nuclear industries. End user requirements will be expressed systematically on the basis of inputs from industrial partners on various types of process heat applications. These requirements will be confronted with the capabilities of the HTR heat source, in order to point out possible

Problem solving of student with visual impairment related to mathematical literacy problem

Science.gov (United States)

Pratama, A. R.; Saputro, D. R. S.; Riyadi

2018-04-01

The student with visual impairment, total blind category depends on the sense of touch and hearing in obtaining information. In fact, the two senses can receive information less than 20%. Thus, students with visual impairment of the total blind categories in the learning process must have difficulty, including learning mathematics. This study aims to describe the problem-solving process of the student with visual impairment, total blind category on mathematical literacy issues based on Polya phase. This research using test method similar problems mathematical literacy in PISA and in-depth interviews. The subject of this study was a student with visual impairment, total blind category. Based on the result of the research, problem-solving related to mathematical literacy based on Polya phase is quite good. In the phase of understanding the problem, the student read about twice by brushing the text and assisted with information through hearing three times. The student with visual impairment in problem-solving based on the Polya phase, devising a plan by summoning knowledge and experience gained previously. At the phase of carrying out the plan, students with visual impairment implement the plan in accordance with pre-made. In the looking back phase, students with visual impairment need to check the answers three times but have not been able to find a way.

Program-oriented approach to resource saving issues in construction materials industry

Directory of Open Access Journals (Sweden)

Novikova Galina

2017-01-01

Full Text Available The construction as a sector of the economy is one of the largest consumers of energy resources, and the building materials industry is today one of the most energy-intensive construction industry. At the enterprises of the building materials industry the different approaches and methods are used to solve resource and energy problems. Energy saving is considered not as an complex approach in the enterprise activity, but as activity for the implementation of specific energy-saving projects, which have limitations in time and in resources. The authors suggest to use a softwareoriented approach to solving the problems of resource and energy saving. For practical application of program-oriented approach we offer to use a structuring method of the decision-making, not previously used to solve problems of resource and energy saving.

Industrial applications of radiotracers in Indonesia

International Nuclear Information System (INIS)

Wandowo

1994-01-01

Applications of isotopes and radiation have been developed since 1970 at the Centre for Application of Isotopes and Radiation, National Atomic Energy Agency or BATAN. The scope of applications cover various fields, namely, agriculture, medicine, hydrology, sedimentology and industry. The use of radiotracers prove to be very beneficial for problem solving in industrial process plants and this technique will continuously be promoted by BATAN to industries in Indonesia. Several examples of radiotracer applications in industries which have been carried out by the Group of Industry of the Centre for Application of Isotopes and Radiation are presented. (author). 7 refs., 4 figs., 1 tab

Advanced Industrial Materials (AIM) Program. Annual progress report, FY 1994

Energy Technology Data Exchange (ETDEWEB)

Sorrell, C.A.

1995-05-01

The Advanced Industrial Materials Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy in the Department of Energy. The mission of the AIM Program is to conduct applied research, development, and applications engineering work, in partnership with industry, to commercialize new or improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. AIM is responsible for identifying, supporting, and coordinating multidisciplinary projects to solve identified industrial needs and transferring the technology to the industrial sector. Program investigators in the DOE National Laboratories are working closely with approximately 100 companies, including 15 partners in Cooperative Research and Development Agreements. Work is being done in a wide variety of materials technologies, including intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The Program supports other efforts in the Office of Industrial Technologies to assist the energy consuming process industries, including forest products, glass, steel, aluminum, foundries, chemicals, and refineries. To support OITs {open_quotes}Industries of the Future{close_quotes} initiatives and to improve the relevance of materials research, assessments of materials needs and opportunities in the process industries are being made. These assessments are being used for program planning and priority setting; support of work to satisfy those needs is being provided. Many new materials that have come into the marketplace in recent years, or that will be available for commercial use within a few more years, offer substantial benefits to society. This document contains 28 reports on advanced materials research. Individual reports have been processed separately for entry onto the Department of Energy databases.

The Target Industries: Profiles of Five Hazardous Occupations.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

To contribute to a fuller understanding and awareness of the hazards involved in industries as well as to call attention to steps being taken to solve safety problems, this pamphlet surveys five industries cited among those having the highest rates of job-related injuries in the country. Industries include: (1) Roofing and Sheet Metal, (2)…

Solved problems in electromagnetics

CERN Document Server

Salazar Bloise, Félix; Bayón Rojo, Ana; Gascón Latasa, Francisco

2017-01-01

This book presents the fundamental concepts of electromagnetism through problems with a brief theoretical introduction at the beginning of each chapter. The present book has a strong  didactic character. It explains all the mathematical steps and the theoretical concepts connected with the development of the problem. It guides the reader to understand the employed procedures to learn to solve the exercises independently. The exercises are structured in a similar way: The chapters begin with easy problems increasing progressively in the level of difficulty. This book is written for students of physics and engineering in the framework of the new European Plans of Study for Bachelor and Master and also for tutors and lecturers. .

Integrated Sustainable Planning for Industrial Region Using Geospatial Technology

Science.gov (United States)

Tiwari, Manish K.; Saxena, Aruna; Katare, Vivek

2012-07-01

The Geospatial techniques and its scope of applications have undergone an order of magnitude change since its advent and now it has been universally accepted as a most important and modern tool for mapping and monitoring of various natural resources as well as amenities and infrastructure. The huge and voluminous spatial database generated from various Remote Sensing platforms needs proper management like storage, retrieval, manipulation and analysis to extract desired information, which is beyond the capability of human brain. This is where the computer aided GIS technology came into existence. A GIS with major input from Remote Sensing satellites for the natural resource management applications must be able to handle the spatiotemporal data, supporting spatiotemporal quarries and other spatial operations. Software and the computer-based tools are designed to make things easier to the user and to improve the efficiency and quality of information processing tasks. The natural resources are a common heritage, which we have shared with the past generations, and our future generation will be inheriting these resources from us. Our greed for resource and our tremendous technological capacity to exploit them at a much larger scale has created a situation where we have started withdrawing from the future stocks. Bhopal capital region had attracted the attention of the planners from the beginning of the five-year plan strategy for Industrial development. However, a number of projects were carried out in the individual Districts (Bhopal, Rajgarh, Shajapur, Raisen, Sehore) which also gave fruitful results, but no serious efforts have been made to involve the entire region. No use of latest Geospatial technique (Remote Sensing, GIS, GPS) to prepare a well structured computerized data base without which it is very different to retrieve, analyze and compare the data for monitoring as well as for planning the developmental activities in future.

PEMBELAJARAN KONTEKSTUAL OPEN ENDED PROBLEM SOLVING DENGAN KOMIK MATEMATIKA UNTUK MENINGKATKAN KETERAMPILAN PEMECAHAN MASALAH

Directory of Open Access Journals (Sweden)

Lenny Kurniati

2017-01-01

ABSTRACT The aim of this research to develop a mathematics learning instrument using contextual open ended problem solving with mathematic comic to increase the problem solving skill which valid, practical and effective. The type of research used in this study is development research using modification of Plomp model. Learning instrumen that have been develop are: syllabus, Lesson plan, worksheet, mathematics comic, and problem solving ability test. The results showed: (1 device developed valid; (2 practical learning is characterized by the positive response of students and good teachers ability, (3 Effectiveness characterized by (a problem solving ability score of the experimental class higher than minimum completeness criterion, (b learn interest and problem solving skill, both affected the problem solving ability positively,  (c problem solving ability of the experimental class score is higher than the control class, (d problem solving skill of the experimental class is increasing by 31%, the problem solving ability of the experimental class higher than the control class.. Because of the learning instrument develope are valid, practice and effective, it is shows that the research has ben reach out. Keywords: contextual teaching and learning, open ended problem solving, mathematics comic, problem solving.

The impact of point-of-sale data in demand planning in the South African clothing retail industry

Directory of Open Access Journals (Sweden)

Douglas N. Raza

2017-08-01

Full Text Available Background: In modern days’ dynamic consumer markets, supply chains need to be value driven and consumer oriented. Demand planning allows supply chain members to focus on the consumer and create optimal value. In demand planning, Point-of-Sale (POS data are an essential input to the process thereof; however, literature suggests that POS-based demand planning is often overlooked by demand planners in practice. Objective: The main purpose of this study was to determine the extent to which South African clothing retailers use POS data in demand planning. Method: This study followed the grounded theory approach based on the collection of qualitative data. The data collected was analysed following the grounded theory analysis using codes that resulted in various categories which then developed into themes. Findings: Findings suggest that companies within the clothing retail industry make considerable use of POS data and is a fundamental input factor in the demand planning process. However, this study also found that POS data cannot be applied in the planning for all types of clothing products, and that there are variables other than POS data that form a critical part of the demand planning process. Conclusion: POS data plays a fundamental role is the demand planning process and should be accurately collected and used with other qualitative and quantitative factors as an input factor to the demand planning process. The role of POS data in demand planning is expected to grow as customers are becoming increasingly demanding concerning customer service levels.

Applying Quality Function Deployment in Industrial Design Curriculum Planning

Science.gov (United States)

Liu, Shuo-Fang; Lee, Yann-Long; Lin, Yi-Zhi; Tseng, Chien-Feng

2013-01-01

Industrial design is a discipline that combines multiple professional fields. Enterprise demands for industrial design competencies also change over time; thus, the curriculum of industrial design education should be compatible with the current demands of the industry. However, scientific approaches have not been previously employed to plan…

R&D Plan for RISMC Industry Application #1: ECCS/LOCA Cladding Acceptance Criteria

Energy Technology Data Exchange (ETDEWEB)

Szilard, Ronaldo Henriques [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Epiney, Aaron Simon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tu, Lei [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-04-01

The Nuclear Regulatory Commission (NRC) is finalizing a rulemaking change that would revise the requirements in 10 CFR 50.46. In the proposed new rulemaking, designated as 10 CFR 50.46c, the NRC proposes a fuel performance-based equivalent cladding reacted (ECR) criterion as a function of cladding hydrogen content before the accident (pre-transient) in order to include the effects of higher burnup on cladding performance as well as to address other technical issues. A loss of operational margin may result due to the more restrictive cladding embrittlement criteria. Initial and future compliance with the rule may significantly increase vendor workload and licensee costs as a spectrum of fuel rod initial burnup states may need to be analyzed to demonstrate compliance. The Idaho National Laboratory (INL) has initiated a project, as part of the DOE Light Water Reactor Sustainability Program (LWRS), to develop analytical capabilities to support the industry in the transition to the new rule. This project is called the Industry Application 1 (IA1) within the Risk-Informed Safety Margin Characterization (RISMC) Pathway of LWRS. The general idea behind the initiative is the development of an Integrated Evaluation Model (IEM). The motivation is to develop a multiphysics framework to analyze how uncertainties are propagated across the stream of physical disciplines and data involved, as well as how risks are evaluated in a LOCA safety analysis as regulated under 10 CFR 50.46c. This IEM is called LOTUS which stands for LOCA Toolkit for US, and it represents the LWRS Program’s response to the proposed new rule making. The focus of this report is to complete an R&D plan to describe the demonstration of the LOCA/ECCS RISMC Industry Application # 1 using the advanced RISMC Toolkit and methodologies. This report includes the description and development plan for a RISMC LOCA tool that fully couples advanced MOOSE tools already in development in order to characterize and optimize

Business plan in brief. Draft

International Nuclear Information System (INIS)

1994-06-01

Competition is revolutionizing the electricity industry, and utilities may never be the same. In the past two decades, government deregulation has transformed the airline, cable television, natural gas, and telecommunications industries. Now, with the passage of new laws which have spurred the growth of independent power and opened up transmission access, the electric utility industry has become the laboratory for change. Here in the Northwest, dramatic changes in the electric industry mean that the Bonneville Power Administration (BPA) is facing real competition. Our customers have more choices than they had in the past. BPA's draft Business Plan is a direct response to this changing environment. The plan presents how we propose to adapt to the new competitive marketplace. This is a summary of the plan and some of the important issues it raises for regional discussion. The draft plan contains much more detail on all the topics mentioned here. Business Plan is BPA's first attempt to integrate the long-term strategic plans of the various parts of the agency with a strategic financial plan. Change is evident throughout the plan--change in our operating environment, in our strategic direction, in our customer and constituent relationships, and in BPA itself as an organization

Toward Solving the Problem of Problem Solving: An Analysis Framework

Science.gov (United States)

Roesler, Rebecca A.

2016-01-01

Teaching is replete with problem solving. Problem solving as a skill, however, is seldom addressed directly within music teacher education curricula, and research in music education has not examined problem solving systematically. A framework detailing problem-solving component skills would provide a needed foundation. I observed problem solving…

Supply chain planning and management method:the fruit purchasing company case

Directory of Open Access Journals (Sweden)

Julio Kyosen Nakatani

2018-06-01

Full Text Available Abstract On the world stage, Brazil is the third largest world fruit producer. However, purchasing fruit companies are suffering from the effects of fluctuations in production and demand, inefficiency in production and information trade, lack of understanding of the dynamics of supply and reduction in profitability for all members of the fruit production chain. The supply chain management has been touted as one of the ways to reduce this volatility and improve outcomes for all involved with the supply chain. However, results of recent researches do not relate it directly to the fruit industry. To solve this problem, the present research aimed to analyze the planning and management of the supply chain of a fruit purchasing company and identify contributions and improvements to the theories and methods related to supply chain management to propose a method for planning and management the supply chain of fruit purchasing companies. It was conducted a case study from a mango fruit purchasing company using interviews with industry experts to assess the applicability, functionality and usefulness from the managerial point of view of the proposed method. Data analysis was done through the cross analysis of the methods of the supply chain management and the description of the case. The results of the study allowed the development of a method for planning and management the supply chain of fruit purchasing company. With the proposition of this method is expected to contribute with a sequence of steps to assist in planning and management of supply chain managers and specialists from a fruit purchasing company.

The needs analysis of learning Inventive Problem Solving for technical and vocational students

Science.gov (United States)

Sai'en, Shanty; Tze Kiong, Tee; Yunos, Jailani Md; Foong, Lee Ming; Heong, Yee Mei; Mohaffyza Mohamad, Mimi

2017-08-01

Malaysian Ministry of Education highlighted in their National Higher Education Strategic plan that higher education’s need to focus adopting 21st century skills in order to increase a graduate’s employability. Current research indicates that most graduate lack of problem solving skills to help them securing the job. Realising the important of this skill hence an alternative way suggested as an option for high institution’s student to solve their problem. This study was undertaken to measure the level of problem solving skills, identify the needs of learning inventive problem solving skills and the needs of developing an Inventive problem solving module. Using a questionnaire, the study sampled 132 students from Faculty of Technical and Vocational Education. Findings indicated that majority of the students fail to define what is an inventive problem and the root cause of a problem. They also unable to state the objectives and goal thus fail to solve the problem. As a result, the students agreed on the developing Inventive Problem Solving Module to assist them.

Pengembangan Perangkat Pembelajaran Bangun Ruang di SMP dengan Pendekatan Creative Problem Solving

Directory of Open Access Journals (Sweden)

Yuli Sulistyowati

2014-12-01

Abstract The aim of this research was to produce the solid instructional package with Creative Problem Solving  approach which have good quality based on the validity, practicality, and effectiveness criteria. This study was a research and development using the developmental model adapted from Thiagarajan, Semmel, and Semmel included define, design, develop, and disseminate stages. This study produces instructional package consists of lesson plans, student worksheets, achievement tests, and mathematical reasoning tests. The results of the validation showed that the developed package is very valid based on lesson plans, student worksheets, and tests. The results of the tryout indicated that lesson plans and student worksheets are practical and effective. The practicality was in  very practical category based on teacher’s assessment and practical category based on the implementation of learning and student’s assessment. The effectiveness was in the effective category based on student’s learning mastery. In the classical mastery learning it reached 76.67% for achievement and 90% for mathematical reasoning.   Keywords: development, instructional package, Creative Problem Solving

Behavior-based evacuation planning

KAUST Repository

Rodriguez, Samuel

2010-05-01

In this work, we present a formulation of an evacuation planning problem that is inspired by motion planning and describe an integrated behavioral agent-based and roadmap-based motion planning approach to solve it. Our formulation allows users to test the effect on evacuation of a number of different environmental factors. One of our main focuses is to provide a mechanism to investigate how the interaction between agents influences the resulting evacuation plans. Specifically, we explore how various types of control provided by a set of directing agents effects the overall evacuation planning strategies of the evacuating agents. ©2010 IEEE.

Behavior-based evacuation planning

KAUST Repository

Rodriguez, Samuel; Amato, Nancy M

2010-01-01

In this work, we present a formulation of an evacuation planning problem that is inspired by motion planning and describe an integrated behavioral agent-based and roadmap-based motion planning approach to solve it. Our formulation allows users to test the effect on evacuation of a number of different environmental factors. One of our main focuses is to provide a mechanism to investigate how the interaction between agents influences the resulting evacuation plans. Specifically, we explore how various types of control provided by a set of directing agents effects the overall evacuation planning strategies of the evacuating agents. ©2010 IEEE.

Impact of tobacco industry and other corporations in the defeat of the 1994 Clinton health care plan.

Science.gov (United States)

Givel, Michael

2017-06-21

The primary reason cited by many scholars for the defeat of the Clinton Administration's 1994 health care reform bill has long been identified as Health Insurance Association of America and National Federation of Independent Businesses opposition to the bill. Given this predominant consensus combined with sizeable proposed funding for the bill by a large tobacco product tax, this manuscript examined what the tobacco industry's role was in whole or part in defeating the Clinton health care bill. This research occurred through crosschecking internal tobacco industry documents and Clinton White House documents. Prior to the passage of the bill, the tobacco industry accepted a compromise of 45 cents per pack increase phased in over five years. Due to this compromise, the industry or third party allies had no role in the ultimate defeat in the bill. The primary reason for the bill's ultimate defeat was general business (but not tobacco industry and third party ally) opposition, the bill running out of time, and conflicting bills. Secondary reasons for the bill's defeat included issues with: employer mandates, high taxes on insurance plans, impacts on medical research and education, Congressional attention to other issues, election year politics, and possible future excise tax possibilities.

Decision-making and problem-solving methods in automation technology

Science.gov (United States)

Hankins, W. W.; Pennington, J. E.; Barker, L. K.

1983-01-01

The state of the art in the automation of decision making and problem solving is reviewed. The information upon which the report is based was derived from literature searches, visits to university and government laboratories performing basic research in the area, and a 1980 Langley Research Center sponsored conferences on the subject. It is the contention of the authors that the technology in this area is being generated by research primarily in the three disciplines of Artificial Intelligence, Control Theory, and Operations Research. Under the assumption that the state of the art in decision making and problem solving is reflected in the problems being solved, specific problems and methods of their solution are often discussed to elucidate particular aspects of the subject. Synopses of the following major topic areas comprise most of the report: (1) detection and recognition; (2) planning; and scheduling; (3) learning; (4) theorem proving; (5) distributed systems; (6) knowledge bases; (7) search; (8) heuristics; and (9) evolutionary programming.

Do problem-solving skills affect success in nursing process applications? An application among Turkish nursing students.

Science.gov (United States)

Bayindir Çevik, Ayfer; Olgun, Nermin

2015-04-01

This study aimed to determine the relationship between problem-solving and nursing process application skills of nursing. This is a longitudinal and correlational study. The sample included 71 students. An information form, Problem-Solving Inventory, and nursing processes the students presented at the end of clinical courses were used for data collection. Although there was no significant relationship between problem-solving skills and nursing process grades, improving problem-solving skills increased successful grades. Problem-solving skills and nursing process skills can be concomitantly increased. Students were suggested to use critical thinking, practical approaches, and care plans, as well as revising nursing processes in order to improve their problem-solving skills and nursing process application skills. © 2014 NANDA International, Inc.

Research and industrial application of x-ray photoelectron spectroscopy (XPS) in Malaysia

International Nuclear Information System (INIS)

Mohd Ambar Yarmo; Abd Razak Daud; Abdul Kariem Arof

2000-01-01

As a developing country, Malaysia is fully committed to research and development especially for industrial development. One of priority fields is advanced materials and surface analysis of such materials is an important aspect in research. Among the tools for surface science analysis is x-ray photoelectron spectroscopy (XPS) which can be considered new to this country. The industrial sector is also keen to solve their problems and developing their products using XPS. The microelectronic and electrical industries are interested in solving problems related to metal-metal joining , gold silica peeling, surface corrosion and surface coating. The glove industry uses XPS to solve problems due to staining and color fading of their products. Research conducted in universities and research institutes that mainly deal with catalysis, membranes for fuel cells, sensors, batteries, corrosion phenomena and interface interaction in coating finds XPS a useful technique for surface studies. Specific examples from various sectors will be presented in this paper. (Author)

Planning Change of the Type of Economic Development of Enterprises of the Dairy Industry with Consideration of Influence of the Competitive Environment

Directory of Open Access Journals (Sweden)

Kulynych Yuriy M.

2013-12-01

Full Text Available The article justifies a necessity of transition of dairy industry enterprises to the intensive type of economic development. It offers a mathematical model of transition to the intensive type of development. The model is build on the basis of the well-known methods. The author offers two variants of formation of the intensive type of development during the period of planning. Pursuant to the first variant, it is planned to increase expenditures of an enterprise during the period of planning, pursuant to the second – to reduce expenditures of the period of planning compared to the basic one. The author considers and analyses the essence of the innovation strategy of dairy enterprises and offers a model of formation of such a strategy at an enterprise. The article considers main problems that suppress investment activity in the country. The author focuses, in particular, on the following: inconsistent investment policy of the state in the food sphere, poorly developed innovation infrastructure, monopoly of reporcessors in the dairy products markets and low level of profitability of dairy enterprises. In conclusion the author offers measures on formation of investment attractiveness of the dairy industry.

Ways to Improve Strategic Planning within the Tourist Industry (in the Case Study of the Republic of Kazakhstan)

Science.gov (United States)

Shilibekova, Balzhan; Syzdykbayeva, Bakyt; Ayetov, Sayat; Agybetova, Rina; Baimbetova, Assel

2016-01-01

Kazakhstan has a great tourist potential, but it is still partly fulfilled. That is why very important to find the weakness in the state's policy and to develop this industry in the best way. The aim of the research is to formulate a hypothesis with regard to the possible content of measures to improve the strategic planning and marketing…

Theory and algorithms for solving large-scale numerical problems. Application to the management of electricity production

International Nuclear Information System (INIS)

Chiche, A.

2012-01-01

This manuscript deals with large-scale optimization problems, and more specifically with solving the electricity unit commitment problem arising at EDF. First, we focused on the augmented Lagrangian algorithm. The behavior of that algorithm on an infeasible convex quadratic optimization problem is analyzed. It is shown that the algorithm finds a point that satisfies the shifted constraints with the smallest possible shift in the sense of the Euclidean norm and that it minimizes the objective on the corresponding shifted constrained set. The convergence to such a point is realized at a global linear rate, which depends explicitly on the augmentation parameter. This suggests us a rule for determining the augmentation parameter to control the speed of convergence of the shifted constraint norm to zero. This rule has the advantage of generating bounded augmentation parameters even when the problem is infeasible. As a by-product, the algorithm computes the smallest translation in the Euclidean norm that makes the constraints feasible. Furthermore, this work provides solution methods for stochastic optimization industrial problems decomposed on a scenario tree, based on the progressive hedging algorithm introduced by [Rockafellar et Wets, 1991]. We also focus on the convergence of that algorithm. On the one hand, we offer a counter-example showing that the algorithm could diverge if its augmentation parameter is iteratively updated. On the other hand, we show how to recover the multipliers associated with the non-dualized constraints defined on the scenario tree from those associated with the corresponding constraints of the scenario subproblems. Their convergence is also analyzed for convex problems. The practical interest of theses solutions techniques is corroborated by numerical experiments performed on the electric production management problem. We apply the progressive hedging algorithm to a realistic industrial problem. More precisely, we solve the French medium

The Future of Electricity Resource Planning

Energy Technology Data Exchange (ETDEWEB)

Kahrl, Fredrich [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lavin, Luke [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Ryan, Nancy [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Olsen, Arne [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-09-14

Electricity resource planning is the process of identifying longer-term investments to meet electricity reliability requirements and public policy goals at a reasonable cost. Resource planning processes provide a forum for regulators, electric utilities, and electricity industry stakeholders to evaluate the economic, environmental, and social benefits and costs of different investment options. By facilitating a discussion on future goals, challenges and strategies, resource planning processes often play an important role in shaping utility business decisions. Resource planning emerged more than three decades ago in an era of transition, where declining electricity demand and rising costs spurred fundamental changes in electricity industry regulation and structure. Despite significant changes in the industry, resource planning continues to play an important role in supporting investment decision making. Over the next two decades, the electricity industry will again undergo a period of transition, driven by technological change, shifting customer preferences and public policy goals. This transition will bring about a gradual paradigm shift in resource planning, requiring changes in scope, approaches and methods. Even as it changes, resource planning will continue to be a central feature of the electricity industry. Its functions — ensuring the reliability of high voltage (“bulk”) power systems, enabling oversight of regulated utilities and facilitating low-cost compliance with public policy goals — are likely to grow in importance as the electricity industry enters a new period of technological, economic and regulatory change. This report examines the future of electricity resource planning in the context of a changing electricity industry. The report examines emerging issues and evolving practices in five key areas that will shape the future of resource planning: (1) central-scale generation, (2) distributed generation, (3) demand-side resources, (4

Impact of Guided Reflection with Peers on the Development of Effective Problem Solving Strategies and Physics Learning

Science.gov (United States)

Mason, Andrew J.; Singh, Chandralekha

2016-01-01

Students must learn effective problem solving strategies in order to develop expertise in physics. Effective problem solving strategies include a conceptual analysis of the problem followed by planning of the solution, and then implementation, evaluation, and reflection upon the process. Research suggests that converting a problem from the initial…

The profile of conceptual comprehension of pre-service teacher in the mathematical problem solving with low emotional intelligence

Science.gov (United States)

Prayitno, S. H.; Suwarsono, St.; Siswono, T. Y. E.

2018-03-01

Conceptual comprehension in this research is the ability to use the procedures that are owned by pre-service teachers to solve problems by finding the relation of the concept to another, or can be done by identifying the type of problem and associating it with a troubleshooting procedures, or connect the mathematical symbols with mathematical ideas and incorporate them into a series of logical reasoning, or by using prior knowledge that occurred directly, through its conceptual knowledge. The goal of this research is to describe the profile of conceptual comprehensin of pre-service teachers with low emotional intelligence in mathematical problems solving. Through observation and in-depth interview with the research subject the conclusion was that: pre-service teachers with low emotional intelligence pertained to the level of formal understanding in understanding the issues, relatively to the level of intuitive understanding in planning problem solving, to the level of relational understanding in implementing the relational problem solving plan, and pertained to the level of formal understanding in looking back to solve the problem.

Cross-national comparisons of complex problem-solving strategies in two microworlds.

Science.gov (United States)

Güss, C Dominik; Tuason, Ma Teresa; Gerhard, Christiane

2010-04-01

Research in the fields of complex problem solving (CPS) and dynamic decision making using microworlds has been mainly conducted in Western industrialized countries. This study analyzes the CPS process by investigating thinking-aloud protocols in five countries. Participants were 511 students from Brazil, Germany, India, the Philippines, and the United States who worked on two microworlds. On the basis of cultural-psychological theories, specific cross-national differences in CPS strategies were hypothesized. Following theories of situatedness of cognition, hypotheses about the specific frequency of problem-solving strategies in the two microworlds were developed. Results of the verbal protocols showed (a) modification of the theoretical CPS model, (b) task dependence of CPS strategies, and (c) cross-national differences in CPS strategies. Participants' CPS processes were particularly influenced by country-specific problem-solving strategies. Copyright © 2009 Cognitive Science Society, Inc.

RISMC Advanced Safety Analysis Project Plan – FY 2015 - FY 2019

Energy Technology Data Exchange (ETDEWEB)

Szilard, Ronaldo H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Youngblood, Robert [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-09-01

In this report, a project plan is developed, focused on industry applications, using Risk-Informed Safety Margin Characterization (RISMC) tools and methods applied to realistic, relevant, and current interest issues to the operating nuclear fleet. RISMC focuses on modernization of nuclear power safety analysis (tools, methods and data); implementing state-of-the-art modeling techniques (which include, for example, enabling incorporation of more detailed physics as they become available); taking advantage of modern computing hardware; and combining probabilistic and mechanistic analyses to enable a risk informed safety analysis process. The modernized tools will maintain the current high level of safety in our nuclear power plant fleet, while providing an improved understanding of safety margins and the critical parameters that affect them. Thus, the set of tools will provide information to inform decisions on plant modifications, refurbishments, and surveillance programs, while improving economics. This set of tools will also benefit the design of new reactors, enhancing safety per unit cost of a nuclear plant. The proposed plan will focus on application of the RISMC toolkit, in particular, solving realistic problems of important current issues to the nuclear industry, in collaboration with plant owners and operators to demonstrate the usefulness of these tools in decision making.

Problem solving in nuclear engineering using supercomputers

International Nuclear Information System (INIS)

Schmidt, F.; Scheuermann, W.; Schatz, A.

1987-01-01

The availability of supercomputers enables the engineer to formulate new strategies for problem solving. One such strategy is the Integrated Planning and Simulation System (IPSS). With the integrated systems, simulation models with greater consistency and good agreement with actual plant data can be effectively realized. In the present work some of the basic ideas of IPSS are described as well as some of the conditions necessary to build such systems. Hardware and software characteristics as realized are outlined. (orig.) [de

FEATURES OF FORMATION SCENARIOS OF THE FOOD INDUSTRY

Directory of Open Access Journals (Sweden)

Serhiy Nozhenko

2016-03-01

Full Text Available The article is devoted to the topic – the invention of approaches to enterprise development oil and fat industry. The goal – to identify features of formation scenarios for the food industry. The chosen methodology allowed to analyze and evaluate the functioning of state enterprises. Results are discovering the benefits of scenario planning to find ways of business development. Novelty – a rationale for the use of scenario planning for enterprise development oil and fat industry, developing a set of scenarios. The practical significance – providing specific scenarios for enterprises of oil and fat industry. Keywords: scenario planning, scenario development, enterprise, oil and fat industry outlook. JEL: L 66

Model-centered approach to early planning and design of an eco-industrial park around an oil refinery.

Science.gov (United States)

Zhang, Xiangping; Strømman, Anders H; Solli, Christian; Hertwich, Edgar G

2008-07-01

Industrial symbiosis promises environmental and economic gains through a utilization of the waste of some processes as a resource for other processes. Because of the costs and difficulties of transporting some wastes, the largest theoretical potential for industrial symbiosis is given when facilities are colocated in an eco-industrial park (EIP). This study proposes a model-centered approach with an eight-step procedure for the early planning and design of an eco-industrial park considering technical and environmental factors. Chemical process simulation software was used to model the energy and material flows among the prospective members and to quantify the benefits of integration among different firms in terms of energy and resources saved as compared to a reference situation. Process simulation was based on a combination of physical models of industrial processes and empirical models. The modeling allows for the development and evaluation of different collaboration opportunities and configurations. It also enables testing chosen configurations under hypothetical situations or external conditions. We present a case study around an existing oil and gas refinery in Mongstad, Norway. We used the approach to propose the colocation of a number of industrial facilities around the refinery, focused on integrating energy use among the facilities. An EIP with six main members was designed and simulated, matching new hypothetical members in size to the existing operations, modeling material and energy flows in the EIP, and assessing these in terms of carbon and hydrogen flows.

Metrology-based control and profitability in the semiconductor industry

Science.gov (United States)

Weber, Charles

2001-06-01

This paper summarizes three studies of the semiconductor industry conducted at SEMATECH and MIT's Sloan School of Management. In conjunction they lead to the conclusion that rapid problem solving is an essential component of profitability in the semiconductor industry, and that metrology-based control is instrumental to rapid problem solving. The studies also identify the need for defect attribution. Once a source of a defect has been identified, the appropriate resources--human and technological--need to be brought into the physically optimal location for corrective action. The Internet is likely to enable effective defect attribution by inducing collaboration between different companies.

Planning for Higher Education.

Science.gov (United States)

Lindstrom, Caj-Gunnar

1984-01-01

Decision processes for strategic planning for higher education institutions are outlined using these parameters: institutional goals and power structure, organizational climate, leadership attitudes, specific problem type, and problem-solving conditions and alternatives. (MSE)

Ex-post assessment of China's industrial energy efficiency policies during the 11th Five-Year Plan

International Nuclear Information System (INIS)

Yu, Yuqing; Wang, Xiao; Li, Huimin; Qi, Ye; Tamura, Kentaro

2015-01-01

China implemented a package of policies during the 11th Five-Year Plan (2006–2010) to improve industrial energy efficiency. This assessment provides a methodology that establishes a causal relationship between policy implementation and energy conservation effects. To enhance the confidence in the research findings, this assessment applies two distinctive and independent approaches: one top-down and the other bottom-up. This assessment finds that industrial energy efficiency policies collectively achieved energy savings of 322 Mtce (9.4 EJ) against the baseline scenario. This accounted for 59% of the sector's total energy savings from 2006 to 2010. The remaining energy savings were realised through autonomous technology improvement (33%) and sector-level structural shift (8%). Correspondingly, cumulative avoided CO 2 emissions realised through energy efficiency policies amounted to 760 million tons. This assessment concludes that industrial energy efficiency policies were effective in realising energy conservation targets, but energy conservation effects were not achieved in a cost-effective way. Command and control measures were dominantly implemented, with economic incentives and informational measures taking a complementary role; while market based instruments did not play an important role. As China is planning on implementing a nationwide emissions trading scheme, special attention needs to be paid to policy interaction and coordination. - Highlights: • EE policies applied in the industry sector achieved energy savings of 322 Mtce. • Energy saving realized through EE policies accounted for 59% of the sector's total. • Avoided CO 2 emissions realized by EE policies amounted to 760 million tons. • Autonomous technology improvement accounted for 33% of the sector's total energy savings. • Sector-level structural shift accounted for the remaining 8% energy savings

DIAGRAM SOLVE THE USE OF SIMULINK BLOCK DIAGRAM TO SOLVE MATHEMA THEMATICAL CONTROL EQU MATHEMATICAL MODELS AND CONTROL EQUATIONS

Directory of Open Access Journals (Sweden)

N.M. Ghasem

2003-12-01

Full Text Available In this paper, the simulink block diagram is used to solve a model consists of a set of ordinary differential and algebraic equations to control the temperature inside a simple stirred tank heater. The flexibility of simulink block diagram gives students a better understanding of the control systems. The simulink also allows solution of mathematical models and easy visualization of the system variables. A polyethylene fluidized bed reactor is considered as an industrial example and the effect of the Proportional, Integral and Derivative control policy is presented for comparison.

The electricity supply industry in England and Wales. Medium term development plan 1986-93

International Nuclear Information System (INIS)

1986-09-01

The main objective of the Electricity Supply Industry in England and Wales is to develop and maintain electricity supplies to meet customers' needs as cheaply as possible. Over the medium term, 1986 - 1993, the goal is to reduce the real average price per kWh sold, whilst maintaining high standards of service and meeting financial obligations. The strategy set out comprises reducing controllable costs per kWh sold to 1992/3, pursuing a vigorous and selective marketing strategy so that an expected sales increase of 10% is achieved, securing a long term supply of coal at minimum cost by developing the commercial relationship with British Coal, increasing the proportion of electrical energy supplied by nuclear energy to 25% by 1992/3 and being environmentally concerned. The introduction outlines the medium term business, energy and economic environment, financial targets and price prospects. Plans to support the strategy outlined are presented. Each section sets out the objectives and the plans to achieve these. The strategy for new power stations is to develop fossil-fueled and nuclear as well as to develop alternative technologies. (UK)

Nursing's role in Y2K planning.

Science.gov (United States)

Simpson, R L

1999-04-01

Why haven't more nurses fulfilled their role in Y2K planning? Nurses need to apply their skills and expertise to solving often overlooked problems such as point-of-service applications, transactions with business partners, and contingency planning.

IMPROVING THE EFFICIENCY OF SPRAY TYPE DEVICES WHEN SOLVING PROBLEMS IN INDUSTRIAL ECOLOGY

Directory of Open Access Journals (Sweden)

S. Iu. Panov

2014-01-01

Full Text Available Summary. This carried out work is aimed enhancing the efficiency of the spray scrubber by combining processes and improving hydraulic conditions in the device. The problem of treating waste gases is often characterized by unique features and the significant factor that makes it difficult to find a solution to the problem of treatment is the low and/or variable concentration of the pollutant. With a removal efficiency of up to 98 %, wet treatment technology in scrubber type devices is the only practical method advantageous to the treatment of waste gases. The set objective is solved by developing a two-stage treatment system for pyrolysis gas based on ejector scrubbers. Their advantage - a central nozzle supply that allows the scrubber to operate on the principle of an ejector pump. A drift eliminator of the developed device is located on the case unit and a chain is suspended from a clamp mounted on the lower part of the tube neck by pins and two detachable joints. The operation of the scrubber was checked in compliance with the absorption gas treatment of sulfur dioxide. A chemical sorbent, calcium carbonate which is produced as a by-product in the manufacture of nitroammophos at JSC “Minudobrenia” factory is used. Preliminary results indicate that the stiochiometric inlet ratio of Ca/S equals about 2.0 and SO2 emissions reduce by 80-90 %, significantly larger than the planned 70 % and subsequently corresponds to the residue concentration of less than 30 mg/m3 . This is explained by the greater degree of capture and deposition of the sorbent on the chain curtain (not more than 20 mg/m3 . The proposed device for treating gases enables: improvement in the efficiency of gas treatment; increased reliability; increase in the degree of treatment of the gas flow without the use of additional equipment; reduction in metal and design complexity; reduction on the cost of the treatment process and simplification in the device design.

Industrial Performance of the Renewable Resources Industry in China

Directory of Open Access Journals (Sweden)

Dong Zhou

2015-08-01

Full Text Available Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important role in improving the industrial performance because of the advantage in technology and capital. However, this paper analyzed the performance of China’s renewable resource industry from two aspects—the overall industrial development and the listed companies, from which two conclusions have drawn: (1 Above a designated size, private enterprises have the greatest contribution, while the contribution of state-owned and foreign-funded enterprises is different; (2 The main reason for the high positive growth rate of total factor productivity between 2009 and 2013 is the rapid growth of technological progress such as the improvement of production processes and manufacturing skills, rather than the promotion of management, system, or polices.

Chromatography–mass spectrometry in aerospace industry

International Nuclear Information System (INIS)

Buryak, Alexey K; Serduk, T M

2013-01-01

The applications of chromatography–mass spectrometry in aerospace industry are considered. The primary attention is devoted to the development of physicochemical grounds of the use of various chromatography–mass spectrometry procedures to solve topical problems of this industry. Various methods for investigation of the composition of rocket fuels, surfaces of structural materials and environmental media affected by aerospace activities are compared. The application of chromatography–mass spectrometry for the development and evaluation of processes for decontaminations of equipment, industrial wastes and soils from rocket fuel components is substantiated. The bibliography includes 135 references.

The power industry of the Magadan oblast: part of the Leninist GOELRO (State Commission for the Electrification of Russia) plan

Energy Technology Data Exchange (ETDEWEB)

Pozdnyak, I.G.; Anishchenko, Ye.B.

1981-01-01

A brief history is given of the development of the Magadan oblast's power industry, which is inseparably connected with development of the very rich raw material resources and fast development of the mining industry. In 1985 completion of construction of the Kolyma GES is planned; with the end of its construction will begin preparatory work one Ust'-Srednekansk GES: the second GES of the Kalyma falls. Work has begun since 1981 to expand the third phase of the Magadan heat and electric power plant. In 1982 completion of installation of power equipment at the Arkagalinsk State regional power plant is planned. In the 11th five-year plan construction of the system of 220 kV power lines will be finished, and 110 and 35 kV power distribution lines will be built. A special place belongs to construction of the Lankovskaya thermal power plant, which will aid in creating a stable fuel-energy base with a positive future. Chukotka power will be further developed. By 1990, 18 more state farms should be connected to the state power system. Completing the power basis in the Magadan oblast will enable an acceleration in its development, and a rise in the material and cultural standard of living of the people of the Far Northeast.

Solving the geologic issues in nuclear waste disposal

International Nuclear Information System (INIS)

Towse, D.

1979-01-01

Technical problems with nuclear waste disposal are largely geological. If these are not solved, curtailment of nuclear power development may follow, resulting in loss of an important element in the national energy supply. Present knowledge and credible advances are capable of solving these problems provided a systems view is preserved and a national development plan is followed. This requires identification of the critical controllable elements and a systematic underground test program to prove those critical elements. Waste migration can be understood and controlled by considering the key elements in the system: the system geometry, the hydrology, and the waste-rock-water chemistry. The waste program should: (1) identify and attack the critical problems first; (2) provide tests and demonstration at real disposal sites; and (3) schedule elements with long lead-times for early start and timely completion

Enhancing SAT Based Planning with Landmark Knowledge

NARCIS (Netherlands)

Elffers, J.; Konijnenberg, D.; Walraven, E.M.P.; Spaan, M.T.J.

2013-01-01

Several approaches exist to solve Artificial Intelligence planning problems, but little attention has been given to the combination of using landmark knowledge and satisfiability (SAT). Landmark knowledge has been exploited successfully in the heuristics of classical planning. Recently it was also

Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

Energy Technology Data Exchange (ETDEWEB)

Santos, Joyra Amaral dos

1999-08-01

This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

Ways of Light Industry Development

Institute of Scientific and Technical Information of China (English)

Tang Jintao

2009-01-01

@@ "The planning of the right industry restructuring and revitalization" was officially released on May 18th this year. This planning mainly includes food, cereals, oil, batteries, leather, paper, fermentation, brewing, sugar refining and home electrical appliances. As a response to a comprehensive action plan, the planning period is from 2009 to 2011.

Optimal waste heat recovery and reuse in industrial zones

International Nuclear Information System (INIS)

Stijepovic, Mirko Z.; Linke, Patrick

2011-01-01

Significant energy efficiency gains in zones with concentrated activity from energy intensive industries can often be achieved by recovering and reusing waste heat between processing plants. We present a systematic approach to target waste heat recovery potentials and design optimal reuse options across plants in industrial zones. The approach first establishes available waste heat qualities and reuse feasibilities considering distances between individual plants. A targeting optimization problem is solved to establish the maximum possible waste heat recovery for the industrial zone. Then, a design optimization problem is solved to identify concrete waste heat recovery options considering economic objectives. The paper describes the approach and illustrates its application with a case study. -- Highlights: → Developed a systematic approach to target waste heat recovery potentials and to design optimal recovery and reuse options across plants in industrial zones. → Five stage approach involving data acquisition, analysis, assessment, targeting and design. → Targeting optimization problem establishes the maximum possible waste heat recovery and reuse limit for the industrial zone. → Design optimization problem provides concrete waste heat recovery and reuse network design options considering economic objectives.

Comprehensive Planning for Classification and Disposal of Solid Waste at the Industrial Parks regarding Health and Environmental Impacts

Directory of Open Access Journals (Sweden)

Hassan Hashemi

2014-01-01

Full Text Available The aim of this study is the comprehensive planning for integrated management of solid waste at the industrial parks. The share of each industrial group including food, metal, chemical, non-metallic minerals, textile, electrical and electronical, and cellulose industries were 48.2, 14.9, 6.7, 22, 0.9, 0.6, and 6.5 percent, respectively. The results showed that nearly half of total industrial waste produced from the range of biological materials are biodegradable and discharging them without observing environmental regulations leads to short-term pollution and nuisance in the acceptor environment. Also some parts of case study waste were recyclable which is considerable from viewpoint of economical and environmental pollution. Long-term impacts will appear due to improper site selection of disposal from the spatial standpoint. In this way, an approach for site selection using several socioeconomic, physical, and environmental criteria based on multicriteria decision making model (MCDM is introduced. Health risks and environment pollution such as soil and surface water may be done. It is essential to revise the studied industries layout, particularly those units which produce special waste which should be more cautious. Also stricter enforcement is required as an effective step in reducing the harmful impacts of it.

Industry 4.0 and how purchasing can progress and benefit from the fourth industrial revolution

NARCIS (Netherlands)

Torn, Isaäc Anthony Robbert-Jan; Pulles, Niels Jaring; Schiele, Holger

2018-01-01

Since its’ announcement in 2011, the number of scientific publications on Industry 4.0 is growing exponentially. Significant investments by industrial firms, at present and planned for the coming years, indicate the expectations by the industry in terms of increased productivity because of the

Implementation of Statistics in Business and Industry

OpenAIRE

BOVAS, ABRAHAM

2007-01-01

Statisticians have devised many tools for application and these are available to be utilized for general business improvement and industrial problem solving. However, there is a wide gap between the available tools and what are practiced in business and industrial organizations. Thus it is important for statisticians to direct serious attention to bridging this gap if statistics is to be relevant in business and industry and to the society at large. In this paper we look at some ideas for imp...

Photolithography diagnostic expert systems: a systematic approach to problem solving in a wafer fabrication facility

Science.gov (United States)

Weatherwax Scott, Caroline; Tsareff, Christopher R.

1990-06-01

One of the main goals of process engineering in the semiconductor industry is to improve wafer fabrication productivity and throughput. Engineers must work continuously toward this goal in addition to performing sustaining and development tasks. To accomplish these objectives, managers must make efficient use of engineering resources. One of the tools being used to improve efficiency is the diagnostic expert system. Expert systems are knowledge based computer programs designed to lead the user through the analysis and solution of a problem. Several photolithography diagnostic expert systems have been implemented at the Hughes Technology Center to provide a systematic approach to process problem solving. This systematic approach was achieved by documenting cause and effect analyses for a wide variety of processing problems. This knowledge was organized in the form of IF-THEN rules, a common structure for knowledge representation in expert system technology. These rules form the knowledge base of the expert system which is stored in the computer. The systems also include the problem solving methodology used by the expert when addressing a problem in his area of expertise. Operators now use the expert systems to solve many process problems without engineering assistance. The systems also facilitate the collection of appropriate data to assist engineering in solving unanticipated problems. Currently, several expert systems have been implemented to cover all aspects of the photolithography process. The systems, which have been in use for over a year, include wafer surface preparation (HMDS), photoresist coat and softbake, align and expose on a wafer stepper, and develop inspection. These systems are part of a plan to implement an expert system diagnostic environment throughout the wafer fabrication facility. In this paper, the systems' construction is described, including knowledge acquisition, rule construction, knowledge refinement, testing, and evaluation. The roles

The Effect of Metacognitive Instruction on Problem Solving Skills in Iranian Students of Health Sciences

OpenAIRE

Safari, Yahya; Meskini, Habibeh

2015-01-01

Background: Learning requires application of such processes as planning, supervision, monitoring and reflection that are included in the metacognition. Studies have shown that metacognition is associated with problem solving skills. The current research was conducted to investigate the impact of metacognitive instruction on students? problem solving skills. Methods: The study sample included 40 students studying in the second semester at Kermanshah University of Medical Sciences, 2013-2014. T...

Teaching effective problem solving skills to radiation protection students

International Nuclear Information System (INIS)

Waller, Edward

2008-01-01

Full text: Problem solving skills are essential for all radiation protection personnel. Although some students have more natural problem solving skills than others, all students require practice to become comfortable using these skills. At the University of Ontario Institute of Technology (UOIT), a unique one-semester course was developed as part of the core curriculum to teach students problem solving skills and elements of modelling and simulation. The underlying emphasis of the course was to allow students to develop their own problem solving strategies, both individually and in groups. Direction was provided on how to examine problems from different perspectives, and how to determine the proper root problem statement. A five-point problem solving strategy was presented as: 1) Problem definition; 2) Solution generation; 3) Decision; 4) Implementation; 5) Evaluation. Within the strategy, problem solving techniques were integrated from diverse areas such as: De Bono 's six thinking hats, Kepner-Tregoe decision analysis, Covey's seven habits of highly effective people, Reason's swiss cheese theory of complex failure, and Howlett's common failure modes. As part of the evaluation step, students critically explore areas such as ethics and environmental responsibility. In addition to exploring problem solving methods, students learn the usefulness of simulation methods, and how to model and simulate complex phenomena of relevance to radiation protection. Computational aspects of problem solving are explored using the commercially available MATLAB computer code. A number of case studies are presented as both examples and problems to the students. Emphasis was placed on solutions to problems of interest to radiation protection, health physics and nuclear engineering. A group project, pertaining to an accident or event related to the nuclear industry is a course requirement. Students learn to utilize common time and project management tools such as flowcharting, Pareto

Development and Application of Milk-Run Distribution Systems in the Express Industry Based on Saving Algorithm

Directory of Open Access Journals (Sweden)

Zhenlai You

2014-01-01

Full Text Available This paper introduces the milk-run schema into the express distribution logistics through the feasibility analysis of application of cyclic goods-taking schema in the express industry. In order to reach fully loaded as far as possible in distribution, the article improves the traditional model, adopting multi-objective decision and conforming constraint conditions to Milk-run schema, even approximating the practical truth solves model through the C-W saving algorithm. It can effectively shorten the distance and Lower costs by means of reasonable route planning. Finally, the paper has verified the model and its effectiveness of arithmetic application by means of cases analysis.

Combination of AC Transmission Expansion Planning and Reactive Power Planning in the restructured power system

International Nuclear Information System (INIS)

Hooshmand, Rahmat-Allah; Hemmati, Reza; Parastegari, Moein

2012-01-01

Highlights: ► To overcome the disadvantages of DC model in Transmission Expansion Planning, AC model should be used. ► The Transmission Expansion Planning associated with Reactive Power Planning results in fewer new transmission lines. ► Electricity market concepts should be considered in Transmission Expansion Planning problem. ► Reliability aspects should be considered in Transmission Expansion Planning problem. ► Particle Swarm Optimization is a suitable optimization method to solve Transmission Expansion Planning problem. - Abstract: Transmission Expansion Planning (TEP) is an important issue in power system studies. It involves decisions on location and number of new transmission lines. Before deregulation of the power system, the goal of TEP problem was investment cost minimization. But in the restructured power system, nodal prices, congestion management, congestion surplus and so on, have been considered too. In this paper, an AC model of TEP problem (AC-TEP) associated with Reactive Power Planning (RPP) is presented. The goals of the proposed planning problem are to minimize investment cost and maximize social benefit at the same time. In the proposed planning problem, in order to improve the reliability of the system the Expected Energy Not Supplied (EENS) index of the system is limited by a constraint. For this purpose, Monte Carlo simulation method is used to determine the EENS. Particle Swarm Optimization (PSO) method is used to solve the proposed planning problem which is a nonlinear mixed integer optimization problem. Simulation results on Garver and RTS systems verify the effectiveness of the proposed planning problem for reduction of the total investment cost, EENS index and also increasing social welfare of the system.

Efficient Solving of Large Non-linear Arithmetic Constraint Systems with Complex Boolean Structure

Czech Academy of Sciences Publication Activity Database

Fränzle, M.; Herde, C.; Teige, T.; Ratschan, Stefan; Schubert, T.

2007-01-01

Roč. 1, - (2007), s. 209-236 ISSN 1574-0617 Grant - others:AVACS(DE) SFB/TR 14 Institutional research plan: CEZ:AV0Z10300504 Keywords : interval-based arithmetic constraint solving * SAT modulo theories Subject RIV: BA - General Mathematics

Current situation and industrialization of Taiwan nanotechnology

International Nuclear Information System (INIS)

Su, H.-N.; Lee, P.-C.; Tsai, M.-H.; Chien, K.-M.

2007-01-01

Nanotechnology is projected to be a very promising field, and the impact of nanotechnology on society is increasingly significant as the research funding and manufactured goods increase exponentially. A clearer picture of Taiwan's current and future nanotechnology industry is an essential component for future planning. Therefore, this investigation studies the progress of industrializing nanotechnology in Taiwan by surveying 150 companies. Along with understanding Taiwan's current nanotechnology industrialization, this paper also suggests ways to promote Taiwan's nanotechnology. The survey results are summarized and serve as the basis for planning a nanotechnology industrialization strategy

Wyoming's uranium industry: status, impacts, and trends

International Nuclear Information System (INIS)

1978-01-01

The Mineral Division of the Wyoming Department of Economic Planning and Development (DEPAD) commissioned a study in July 1978 of the uranium industry in Wyoming. The study was conducted for the purposes of determining the status, impacts, and future activities of the uranium industry in the State; and to assist in establishing a data base for monitoring programs and related planning activities by State and federal agencies. Another objective of the study was to enhance understanding of the uranium industry in Wyoming by public officials, industrial leaders, and the general public

Air Pollution and Industry.

Science.gov (United States)

Ross, R. D., Ed.

This book is an authoritative reference and practical guide designed to help the plant engineer identify and solve industrial air pollution problems in order to be able to meet current air pollution regulations. Prepared under the editorial supervision of an experienced chemical engineer, with each chapter contributed by an expert in his field,…

Arctic pipeline planning design, construction, and equipment

CERN Document Server

Singh, Ramesh

2013-01-01

Utilize the most recent developments to combat challenges such as ice mechanics. The perfect companion for engineers wishing to learn state-of-the-art methods or further develop their knowledge of best practice techniques, Arctic Pipeline Planning provides a working knowledge of the technology and techniques for laying pipelines in the coldest regions of the world. Arctic Pipeline Planning provides must-have elements that can be utilized through all phases of arctic pipeline planning and construction. This includes information on how to: Solve challenges in designing arctic pipelines Protect pipelines from everyday threats such as ice gouging and permafrost Maintain safety and communication for construction workers while supporting typical codes and standards Covers such issues as land survey, trenching or above ground, environmental impact of construction Provides on-site problem-solving techniques utilized through all phases of arctic pipeline planning and construction Is packed with easy-to-read and under...

EXOPOLYSACCHARIDES SYNTHESIS ON INDUSTRIAL WASTES

Directory of Open Access Journals (Sweden)

T.P.

2016-04-01

Full Text Available Data from the literature and our own studies on the synthesis of microbial exopolysaccharides on various industrial waste (food industry, agricultural sector, biodiesel production, etc. are reviewed here. Utilization of industrial waste to obtain exopolysaccharides will solve not only the problem of secondary raw materials accumulation, but also will reduce the costs of the biosynthesis of practically valuable metabolites. In addition, some kinds of waste have a number of advantages compared to traditional carbohydrate substrates: aside from environmental health benefits, there are technological ones, like the presence of growth factors. There is also no need to use anti-foam substances and substrate sterilization in the latter case.

Comparative analysis of proposals for the planning of the aggregate industry on the island of Tenerife

Energy Technology Data Exchange (ETDEWEB)

HernAndez-Duran, G.; Arranz-Gonzalez, C.; Vega-Panizo, R. de la

2016-07-01

The island of Tenerife is a territory with numerous protected natural areas and other areas which also deserve environmental protection, due to their ecological and landscape richness and values. According to current planning regulations, the aggregate mining industry is limited to a number of areas called extractive zones. The delimitation of such areas has some flaws and inconsistencies from the environmental point of view and from the consideration of the productive capacity of mining resources. This paper shows two models for environmental planning applied to the extractive activity for aggregates for the island of Tenerife, which could serve as alternatives to the current planning model: a model called zoned and another designated as zone- concentrated. These models provide improvements as far as respect for environmental values are concerned and are based on knowledge of the spatial distribution of geological materials. The conclusion is that this knowledge of the distribution of the potential mineral resources in the territory is the key to achieving the effective integration of mining in land-use planning, and to safeguard in the best possible way the mineral resources from the activities that may compromise their future availability. The applied methods could be extended to other territories, particularly islands, where it is very possible that there are similar problems to those that are occurring in Tenerife. (Author)

Solving a bi-objective mathematical programming model for bloodmobiles location routing problem

Directory of Open Access Journals (Sweden)

Masoud Rabbani

2017-01-01

Full Text Available Perishability of platelets, uncertainty of donors’ arrival and conflicting views in platelet supply chain have made platelet supply chain planning a problematic issue. In this paper, mobile blood collection system for platelet production is investigated. Two mathematical models are presented to cover the bloodmobile collection planning problem. The first model is a multi-objective fuzzy mathematical programming in which the bloodmobiles locations are considered with the aim of maximizing potential amount of blood collection and minimizing the operational cost. The second model is a vehicle routing problem with time windows which studies the shuttles routing problem. To tackle the first model, it is reformulated as a crisp multi objective linear programming model and then solved through a fuzzy multi objective programming approach. Several sensitivity analysis are conducted on important parameters to demonstrate the applicability of the proposed model. The proposed model is then solved by using a tailored Simulated Annealing (SA algorithm. The numerical results demonstrate promising efficiency of the proposed solution method.

Analysing student written solutions to investigate if problem-solving processes are evident throughout

Science.gov (United States)

Kelly, Regina; McLoughlin, Eilish; Finlayson, Odilla E.

2016-07-01

An interdisciplinary science course has been implemented at a university with the intention of providing students the opportunity to develop a range of key skills in relation to: real-world connections of science, problem-solving, information and communications technology use and team while linking subject knowledge in each of the science disciplines. One of the problems used in this interdisciplinary course has been selected to evaluate if it affords students the opportunity to explicitly display problem-solving processes. While the benefits of implementing problem-based learning have been well reported, far less research has been devoted to methods of assessing student problem-solving solutions. A problem-solving theoretical framework was used as a tool to assess student written solutions to indicate if problem-solving processes were present. In two academic years, student problem-solving processes were satisfactory for exploring and understanding, representing and formulating, and planning and executing, indicating that student collaboration on problems is a good initiator of developing these processes. In both academic years, students displayed poor monitoring and reflecting (MR) processes at the intermediate level. A key impact of evaluating student work in this way is that it facilitated meaningful feedback about the students' problem-solving process rather than solely assessing the correctness of problem solutions.

A meta-heuristic method for solving scheduling problem: crow search algorithm

Science.gov (United States)

Adhi, Antono; Santosa, Budi; Siswanto, Nurhadi

2018-04-01

Scheduling is one of the most important processes in an industry both in manufacturingand services. The scheduling process is the process of selecting resources to perform an operation on tasks. Resources can be machines, peoples, tasks, jobs or operations.. The selection of optimum sequence of jobs from a permutation is an essential issue in every research in scheduling problem. Optimum sequence becomes optimum solution to resolve scheduling problem. Scheduling problem becomes NP-hard problem since the number of job in the sequence is more than normal number can be processed by exact algorithm. In order to obtain optimum results, it needs a method with capability to solve complex scheduling problems in an acceptable time. Meta-heuristic is a method usually used to solve scheduling problem. The recently published method called Crow Search Algorithm (CSA) is adopted in this research to solve scheduling problem. CSA is an evolutionary meta-heuristic method which is based on the behavior in flocks of crow. The calculation result of CSA for solving scheduling problem is compared with other algorithms. From the comparison, it is found that CSA has better performance in term of optimum solution and time calculation than other algorithms.

Self-directed questions to improve students' ability in solving chemical problems

Science.gov (United States)

Sanjaya, Rahmat Eko; Muna, Khairiatul; Suharto, Bambang; Syahmani

2017-12-01

Students' ability in solving chemical problems is seen from their ability to solve chemicals' non-routine problems. It is due to learning faced directly on non-routine problems will generate a meaningful learning for students. Observations in Banjarmasin Public High School 1 (SMA Negeri 1 Banjarmasin) showed that students did not give the expected results when they were given the non-routine problems. Learning activities by emphasizing problem solving was implemented based on the existence of knowledge about cognition and regulation of cognition. Both of these elements are components of metacognition. The self-directed question is a strategy that involves metacognition in solving chemical problems. This research was carried out using classroom action research design in two cycles. Each cycle consists of four stages: planning, action, observation and reflection. The subjects were 34 students of grade XI-4 at majoring science (IPA) of SMA Negeri 1 Banjarmasin. The data were collected using tests of the students' ability in problem solving and non-tests instrument to know the process of implementation of the actions. Data were analyzed with descriptivequantitativeand qualitative analysis. The ability of students in solving chemical problems has increased from an average of 37.96 in cycle I became 61.83 in cycle II. Students' ability to solve chemical problems is viewed based on their ability to answer self-directed questions. Students' ability in comprehension questions increased from 73.04 in the cycle I became 96.32 in cycle II. Connection and strategic questions increased from 54.17 and 16.50 on cycle I became 63.73 and 55.23 on cycle II respectively. In cycle I, reflection questions were 26.96 and elevated into 36.27 in cycle II. The self-directed questions have the ability to help students to solve chemical problems through metacognition questions. Those questions guide students to find solutions in solving chemical problems.

Using smart materials to solve new challenges in the automotive industry

Science.gov (United States)

Gath, Kerrie K.; Maranville, Clay; Tardiff, Janice

2018-03-01

Ford has an extensive history of developing and utilizing smart and innovative materials in its vehicles. In this paper, we present new challenges the automotive industry is facing and explore how intelligent uses of smart materials can help provide solutions. We explore which vehicle attributes may provide most advantageous for the use smart materials, and discuss how smart material have had technical challenges that limit their use. We also look at how smart materials such as gecko inspired adhesion is providing opportunities during the vehicle assembly process by improving manufacturing quality, environmental sustainability, and worker safety. An emerging area for deployment of smart materials may involve autonomous vehicles and mobility solutions, where customer expectations are migrating toward a seamless and adaptive experience leading to new expectations for an enhanced journey. Another area where smart materials are influencing change is interior and exterior design including smart textiles, photochromatic dyes, and thermochromatic materials. The key to advancing smart materials in automotive industry is to capitalize on the smaller niche applications where there will be an advantage over traditional methods. Ford has an extensive history of developing and utilizing smart and innovative materials. Magnetorheological fluids, thermoelectric materials, piezoelectric actuators, and shape memory alloys are all in production. In this paper we present new challenges the automotive industry is facing and explore how intelligent uses of smart materials can help provide solutions. We explore which vehicle attributes may provide most advantageous for the use smart materials, and discuss how smart materials have had technical challenges that limit their use. An emerging area for deployment of smart materials may involve autonomous vehicles and mobility solutions, where customer expectations may require a seamless and adaptive experience for users having various

Using the method of ideal point to solve dual-objective problem for production scheduling

Directory of Open Access Journals (Sweden)

Mariia Marko

2016-07-01

Full Text Available In practice, there are often problems, which must simultaneously optimize several criterias. This so-called multi-objective optimization problem. In the article we consider the use of the method ideal point to solve the two-objective optimization problem of production planning. The process of finding solution to the problem consists of a series of steps where using simplex method, we find the ideal point. After that for solving a scalar problems, we use the method of Lagrange multipliers

Generation of a plan for the implementation of INTE/ISO IEC 17025 in a paint industry and modification of a quality manual

International Nuclear Information System (INIS)

Salazar Gomez, Andrea Marcela

2014-01-01

A diagnosis to the integrated management system and quality control laboratories is done in a paint industry. The administrative aspects related with the documentation are evaluated: procedures, instructions, records, processes of sampling, testing, for possible accreditation of some methods of analysis under the norm ISO/IEC 17025 representing an opportunity for growth and improvement in labs. The laboratories of the paint industry have analyzed a number of materials such as products for the various stages of construction and beautification of homes, buildings and other, as well as evaluation of the requirements established by international standards to demonstrate competence regarding these. The feasibility of implementing the standard is visualized, solving the disagreements that have been found during the evaluation period. The impact of the perception of quality is determined by the direction, the need for investment in resources, training and equipment. (author) [es

Office of Industrial Technologies research in progress

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

LEMBAR KERJA PESERTA DIDIK (LKPD BERBASIS PROBLEM SOLVING POLYA

Directory of Open Access Journals (Sweden)

Lilis Nurliawaty

2017-03-01

Full Text Available Lack of exact use of teaching materials and does not correspond to the needs of student leads to lack of analytical ability of students to the process of problem solving. Research development worksheets based on Polya problem solving on the heat material aims to develop valid LKPD, practical, and effective. Stages of development using the 4D model was modified into 3D, namely define (definition, Design (planning, and Development (development The results of the validity of the learning device in the category valid, obtained from the calculation of CVI are in the range 0-1 and said in category reliably with r11 value greater than rtabel (rcount > rtabel. The results of the analysis of questionnaire responses of students obtained an average percentage of 87.9% on the analysis. The analysis result of sheets assessment of learning physics used LKPD-based Polya problem solving obtained average percentage analysis results in the first meeting is 77.33% with good category, the average percentage of the results of the analysis at the second meeting is 81.11% with a very good category and average of results percentage analysis at the third meeting is 78.89% with good category. So it can say that LKPD-based Polya problem solving developed valid, practical and effective to use.

The Unplanned Paths of Planning Schools.

Science.gov (United States)

Alonso, William

1986-01-01

Describes the evolving emphasis of schools of urban planning from concentration on scientific management, beautifying cities, and educating the public in the 1920s to solving the social problems in the 1960s. Calls for a collaboration of business and other professional schools to redefine the function and purpose of urban planning schools to…

Rulison Monitoring Plan

Energy Technology Data Exchange (ETDEWEB)

None

2010-07-01

The Project Rulison Monitoring Plan has been developed as part of the U.S. Department of Energy (DOE) Office of Legacy Management's mission to protect human health and the environment. The purpose of the plan is to monitor fluids from gas wells for radionuclides that would indicate contamination is migrating from the Rulison detonation zone to producing gas wells, allowing action to be taken before the contamination could pose a risk. The Monitoring Plan (1) lists the contaminants present and identifies those that have the greatest potential to migrate from the detonation zone (radionuclide source term), (2) identifies locations that monitor the most likely transport pathways, (3) identifies which fluids will be sampled (gas and liquid) and why, (4) establishes the frequency of sampling, and (5) specifies the most practical analyses and where the analysis results will be reported. The plan does not affect the long-term hydrologic sampling conducted by DOE since 1972, which will continue for the purpose of sampling shallow groundwater and surface water near the site. The Monitoring Plan was developed in anticipation of gas wells being drilled progressively nearer the Rulison site. DOE sampled 10 gas wells in 1997 and 2005 at distances ranging from 2.7 to 7.6 miles from the site to establish background concentrations for radionuclides. In a separate effort, gas industry operators and the Colorado Oil and Gas Conservation Commission (COGCC) developed an industry sampling and analysis plan that was implemented in 2007. The industry plan requires the sampling of gas wells within 3 miles of the site, with increased requirements for wells within 1 mile of the site. The DOE plan emphasizes the sampling of wells near the site (Figure 1), specifically those with a bottom-hole location of 1 mile or less from the detonation, depending on the direction relative to the natural fracture trend of the producing formation. Studies indicate that even the most mobile

Verbal Problem-Solving Difficulties in Autism Spectrum Disorders and Atypical Language Development

Science.gov (United States)

Alderson-Day, Ben

2018-01-01

Children with autism spectrum disorders (ASDs) adopt less efficient strategies than typically developing (TD) peers on the Twenty Questions Task (TQT), a measure of verbal problem-solving skills. Although problems with the TQT are typically associated with executive dysfunction, they have also been reported in children who are deaf, suggesting a role for atypical language development. To test the contribution of language history to ASD problem solving, TQT performance was compared in children with high-functioning autism (HFA), children with Asperger syndrome (AS) and TD children. The HFA group used significantly less efficient strategies than both AS and TD children. No group differences were evident on tests of question understanding, planning or verbal fluency. Potential explanations for differences in verbal problem-solving skill are discussed with reference to the development of inner speech and use of visual strategies in ASD. PMID:25346354

Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

Science.gov (United States)

Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

2008-04-01

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

A new algorithm for solving the inventory routing problem with direct shipment

Directory of Open Access Journals (Sweden)

Ali Hossein Mirzaei

2012-02-01

Full Text Available   In this paper a multi-commodity multi-period inventory routing problem in a two-echelon supply chain consisting of a manufacturer and a set of retailers has been studied. In addition to inventory management and distribution planning, production planning has also been considered in the above problem. The objective is to minimize total system cost that consists of production setup, inventory holding and distribution costs. The commodities are delivered to the retailers by an identical fleet of limited capacity vehicles through direct shipment strategy. Also it is assumed that production and storage capacity is limited and stockout is not allowed. Since similar problems without distribution planning are known as NP-hard, this is also an NP-hard problem. Therefore, in this paper, a new improved particle swarm optimization algorithm has been developed consisting of two distinguished phases for problem solving. First, the values of binary variables are determined using the proposed algorithm and then, the continuous variables are calculated by solving a linear programming model. Performance of the proposed algorithm has been compared with genetic and original particle swarm optimization algorithms using various samples of random problems. The findings imply significant performance of the proposed algorithm.         

Evolutionary optimization technique for site layout planning

KAUST Repository

El Ansary, Ayman M.

2014-02-01

Solving the site layout planning problem is a challenging task. It requires an iterative approach to satisfy design requirements (e.g. energy efficiency, skyview, daylight, roads network, visual privacy, and clear access to favorite views). These design requirements vary from one project to another based on location and client preferences. In the Gulf region, the most important socio-cultural factor is the visual privacy in indoor space. Hence, most of the residential houses in this region are surrounded by high fences to provide privacy, which has a direct impact on other requirements (e.g. daylight and direction to a favorite view). This paper introduces a novel technique to optimally locate and orient residential buildings to satisfy a set of design requirements. The developed technique is based on genetic algorithm which explores the search space for possible solutions. This study considers two dimensional site planning problems. However, it can be extended to solve three dimensional cases. A case study is presented to demonstrate the efficiency of this technique in solving the site layout planning of simple residential dwellings. © 2013 Elsevier B.V. All rights reserved.

The Project of Planning

DEFF Research Database (Denmark)

Flyvbjerg, Bent

1986-01-01

This article contains an interview with John Friedmann. The interview covers two core areas in John Friedmann's work: (a) The history of planning, from the beginning of the industrial era till today and (b) radical planning and social mobilization. In relation to radical planning and social mobil...

Linear programming models with planned lead times for supply chain operations planning

NARCIS (Netherlands)

Spitter, J.M.; Hurkens, C.A.J.; Kok, de A.G.; Lenstra, J.K.; Negenman, E.G.

2005-01-01

This paper contributes to the development of models for capacity constrained Supply Chain Operations Planning (SCOP). We focus on production environments with arbitrary supply chain structures. The demand for the end items is assumed to be exogenously determined. We solve the SCOP problem with

Development of a problem solving evaluation instrument; untangling of specific problem solving assets

Science.gov (United States)

Adams, Wendy Kristine

The purpose of my research was to produce a problem solving evaluation tool for physics. To do this it was necessary to gain a thorough understanding of how students solve problems. Although physics educators highly value problem solving and have put extensive effort into understanding successful problem solving, there is currently no efficient way to evaluate problem solving skill. Attempts have been made in the past; however, knowledge of the principles required to solve the subject problem are so absolutely critical that they completely overshadow any other skills students may use when solving a problem. The work presented here is unique because the evaluation tool removes the requirement that the student already have a grasp of physics concepts. It is also unique because I picked a wide range of people and picked a wide range of tasks for evaluation. This is an important design feature that helps make things emerge more clearly. This dissertation includes an extensive literature review of problem solving in physics, math, education and cognitive science as well as descriptions of studies involving student use of interactive computer simulations, the design and validation of a beliefs about physics survey and finally the design of the problem solving evaluation tool. I have successfully developed and validated a problem solving evaluation tool that identifies 44 separate assets (skills) necessary for solving problems. Rigorous validation studies, including work with an independent interviewer, show these assets identified by this content-free evaluation tool are the same assets that students use to solve problems in mechanics and quantum mechanics. Understanding this set of component assets will help teachers and researchers address problem solving within the classroom.

Integrated rural industrialization through biogas

International Nuclear Information System (INIS)

Anon.

1992-01-01

Role of biogas in rural industrialization in India is explained. The Khadi and Village Industries Commission has installed over 2 lakhs (0.2 million) biogas plants during the last 30 years. A 15 cu.m. capacity plant costs Rs. 35,000/-. It produces 65 tons bio-manure worth Rs. 13,000/- in a year and fuel gas equivalent to 3,285 litres of kerosene worth Rs. 9855/-. It provides employment to 300 man days. In addition to serving as a source of energy and manure, it reduces deforestation, solves rural sanitation problem and maintain environmental equilibrium. Industrial activities suitable for rural areas and which can use biogas as a source of power are indicated. (M.G.B.)

Mechatronics ideas for industrial application

CERN Document Server

Szewczyk, Roman; Trojnacki, Maciej; Kaliczyńska, Małgorzata

2015-01-01

This book presents recent advances and developments in control, automation, robotics, and measuring techniques. It presents contributions of top experts in the fields, focused on both theory and industrial practice. The particular chapters present a deep analysis of a specific technical problem which is in general followed by a numerical analysis and simulation, and results of an implementation for the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be useful for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.  

The impact of F-PEC scale and strategic planning in the family business

Directory of Open Access Journals (Sweden)

Nazanin Haji Mirza Hossein Yazdi

2018-01-01

Full Text Available Due to the thrive of family businesses in the current economic situation, to solve the problem of the definition of these businesses, in this paper we suggest using a scale that measures the quality of family influence through three dimensions: power, experience, and culture. The family influence on power, experience and culture (F-PEC scale, as well as strategic planning, have been tested precisely using a random sample of more than 211 people from two companies of Golestan and Shemshal industrial group located in Tehran, Iran through using the confirmatory factor analysis technique. The Scale shows a high level of reliability. F-PEC has been used in a number of studies to theoretical development, particularly in terms of the impact of family influence on the individual resources and as a source of competitive advantage. In this research, strategic planning is also considered as a source of competitive advantage and its impact on the success of the family business has been investigated.

Localization and indigenization of China nuclear power industry

International Nuclear Information System (INIS)

Zhang Xingfa

2009-01-01

It points out that China needs to develop nuclear power to solve the shortage of energy source. Localization and independence is the key for the development of nuclear power industry. Localized and independent nuclear power possesses economical competitiveness. China has the condition and capability to realize localization and independence of nuclear power industry. Technology introduction, adaptation and assimilation can enhance the R and D capability of China's nuclear power industry, and speed up the process of localization and independence. (authors)

Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Peters, Dietmar

2010-11-17

The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

Industrial Waste

DEFF Research Database (Denmark)

Christensen, Thomas Højlund

2011-01-01

generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...... of the system industry has to inform at the planning stage and afterwards in yearly reports on their waste arising and how the waste is managed. If available such information is very helpful in obtaining information about that specific industry. However, in many countries there is very little information...

Implementación de un plan de gestión para la Seguridad Industrial y Salud Ocupacional de la Empresa de Cocinas y Hornos FACOPA de la ciudad de Cuenca

OpenAIRE

Escobar Torres, Jhon Javier

2016-01-01

El proyecto de titulación consiste en implementar y organizar un plan de seguridad industrial y salud ocupacional en la empresa "FACOPA", haciendo un previo diagnóstico del estado de protección física que poseen los empleados, teniendo como finalidad disminuir los accidentes laborales y paras productivas, de acuerdo a las normativas ecuatorianas y extranjeras. The titling project consists of implementing and organizing an industrial safety and occupational health plan for the company "FACO...

Co-operative planning by utilities and local authorities. A solution to solve climate change?

International Nuclear Information System (INIS)

Schlenzing, C.; Steidle, T.

2001-01-01

Since the deregulation of German energy markets 1998 we can observe diverging planning interests and priorities of the local communities on one side and the local energy utilities on the other side. This seriously endangers the consensus in local energy planning achieved in the past which will be crucial in order to identify and implement effective greenhouse gas (GHG) mitigation strategies. This paper presents a co-operative planning approach which embeds systems analysis into a well structured communication, mediation and learning process for decision making. This process is supported by the cooperative modeling system MESAP, a software for energy and environmental planning, which integrates different energy models with an energy information system. This allows to combine traditional local energy planning with the more business oriented view of the utilities. The specific design of MESAP allows for a continuous 'sustainable' planning and monitoring similar to business tools for accounting and controlling in companies. (author)

Impact of guided reflection with peers on the development of effective problem solving strategies and physics learning

OpenAIRE

Mason, Andrew J.; Singh, Chandralekha

2016-01-01

Students must learn effective problem solving strategies in order to develop expertise in physics. Effective problem solving strategies include a conceptual analysis of the problem followed by planning of the solution, and then implementation, evaluation and reflection upon the process. Research suggests that converting a problem from the initial verbal representation to other suitable representation, e.g., diagrammatic representation, during the initial conceptual analysis can facilitate fur...

Impact of Guided Reflection with Peers on the Development of Effective Problem Solving Strategies and Physics Learning

Science.gov (United States)

Mason, Andrew J.; Singh, Chandralekha

2016-05-01

Students must learn effective problem solving strategies in order to develop expertise in physics. Effective problem solving strategies include a conceptual analysis of the problem followed by planning of the solution, and then implementation, evaluation, and reflection upon the process. Research suggests that converting a problem from the initial verbal representation to other suitable representation, e.g., diagrammatic representation, during the initial conceptual analysis can facilitate further analysis of the problem. But without guidance, many introductory physics students solve problems using superficial clues and cues and do not perceive problem solving as an opportunity for learning. Here, we describe a study that suggests that engaging students in reflection with peers about effective problem solving strategies while effective approaches are modeled for them and prompt feedback is provided may enhance desirable skills.

A Plan for improving the industrial constitution in Korea for the Convention on Climate Change - concentrated on manufacturing CO{sub 2} unit analysis

Energy Technology Data Exchange (ETDEWEB)

Kang, Sang In; Kim, Tae Wan; Kim, Yong Kun; Sohn, Yang Hoon; Kim, Seung Woo [Korea Environment Institute, Seoul (Korea)

1998-12-01

Due to the implementation of the Convention on Climate Change in future, a policy plan to prepare for the Convention on Climate Change was promoted to improve constitution of domestic economy practically including foreign negotiation strategies, national energy policy and change in consumption pattern. Based on the CO{sub 2} unit analysis in manufacturing, this study proposed an improvement plan of industrial constitution in Korea to prepare for emission trading system. 31 refs., 30 figs., 68 tabs.

Management of Logistics Planning

OpenAIRE

Bjørnar Aas; Stein W. Wallace

2010-01-01

Logistics problems are gradually becoming more complex and a better understanding of logistics management as a subject is a key to deal with the new challenges. A core element of logistics management is logistics planning, which substitutes for low customer service levels, high waste, and the use of buffers and slacks in the execution of logistic activities. Furthermore, the availability of information and problem-solving capabilities are established as the core parts of logistics planning. B...

Dissociable Stages of Problem Solving (I): Temporal Characteristics Revealed by Eye-Movement Analyses

Science.gov (United States)

Nitschke, Kai; Ruh, Nina; Kappler, Sonja; Stahl, Christoph; Kaller, Christoph P.

2012-01-01

Understanding the functional neuroanatomy of planning and problem solving may substantially benefit from better insight into the chronology of the cognitive processes involved. Based on the assumption that regularities in cognitive processing are reflected in overtly observable eye-movement patterns, here we recorded eye movements while…

China’s Strategic Choice of the Coal Industry

DEFF Research Database (Denmark)

Guo, Zhengquan; Niu, Dongxiao; Wang, Daojuan

2012-01-01

Coal mining industry is one of the most influential industries on environment pollution. In recent years, most studies have shown that green and circular economy is the way to solve the deteriorative environment issue. After introducing green economy theory, including background, concept......, and features, the paper gives us the strategic choice of China’s coal industry. By theoretical analysis, many suggestions have been proposed, including establishment of a people-oriented scientific development ideology, strengthening the implementation of green mining model, encouraging the development...... of circular economy model, promoting coal industrial technological progress, improving management and security technological innovation....

13th European Conference on Mathematics for Industry

CERN Document Server

Mattheij, RMM; Peletier, MA

2006-01-01

ECMI has a brand name in Industrial Mathematics and organises successful biannual conferences. This time, the conference on Industrial Mathematics held in Eindhoven in June 2004 Mathematics focused on Aerospace, Electronic Industry, Chemical Technology, Life Sciences, Materials, Geophysics, Financial Mathematics and Water flow. The majority of the invited talks on these topics can be found in these proceedings. Apart form these lectures, a large number of contributed papers and minisymposium papers are included here. They give an interesting and impressive overview of the important place mathematics has achieved in solving all kinds of problems met in industry, and commerce in particular.

INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

Directory of Open Access Journals (Sweden)

Ahmad Kamil

2015-10-01

Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

Competences of Engineers in the Iron and Steel Industry

Science.gov (United States)

Kozhevnikov, A. V.

2017-12-01

The article presents the results of assessment of the professional performance of engineers working in the iron and steel industry. A competence-based profile of highly-qualified professionals has been built. The study of the competences of the iron and steel industry engineers has shown that their knowledge and skills may be mobilized to solve professional tasks.

Optimizing the Regional Industrial Structure Based on the Environmental Carrying Capacity: An Inexact Fuzzy Multi-Objective Programming Model

Directory of Open Access Journals (Sweden)

Wenyi Wang

2013-12-01

Full Text Available An inexact fuzzy multi-objective programming model (IFMOP based on the environmental carrying capacity is provided for industrial structure optimization problems. In the IFMOP model, both fuzzy linear programming (FLP and inexact linear programming (ILP methods are introduced into a multi-objective programming framework. It allows uncertainties to be directly communicated into the problem solving processing, and it can effectively reflect the complexity and uncertainty of an industrial system without impractical simplification. The two objective functions utilized in the optimization study are the maximum total output value and population size, and the constraints include water environmental capacity, water resource supply, atmospheric environmental capacity and energy supply. The model is subsequently employed in a realistic case for industrial development in the Tongzhou district, Beijing, China. The results demonstrate that the model can help to analyze whether the environmental carrying capacity of Tongzhou can meet the needs of the social economic objectives in the new town plan in the two scenarios and can assist decision makers in generating stable and balanced industrial structure patterns with consideration of the resources, energy and environmental constraints to meet the maximum social economic efficiency.

Planning for design quality

International Nuclear Information System (INIS)

Marguglio, B.W.

1977-01-01

In the nuclear industry and in other high technology industries in which the Government serves as either a customer or a regulator, it is almost always required that the contractor prepare a Quality Program Plan sometimes also referred to as a Quality Program Index. Often, the Quality Program Plan is included as part of the contractor's proposal in response to the Government's or a prime contractor's Request for Proposal. At this stage, the Quality Program Plan serves to demonstrate to the prospective customer the availability of the various quality systems. It provides the customer with a commitment as to the use of these quality systems, thus giving greater assurance that the customer's overall quality and design requirements can be met. The Quality Program Plan is contributing to the salability of the proposal. 1 ref

Ecological safety of thermal power industry and investments

International Nuclear Information System (INIS)

Glebov, V.P.

1995-01-01

Evaluation of ecological safety of domestic fossil fuel thermal power industry is given in comparison with foreign one. Ways of solving ecological problems are considered. They are based on introduction of new technologies, providing decrease of ecological effect, on development of effective ash-and sulfur-trapping, nitrogen purification equipment, on production of ecologically improved fuel. The necessity of investments to power industry is noted

A Comprehensive Planning Model

Science.gov (United States)

Temkin, Sanford

1972-01-01

Combines elements of the problem solving approach inherent in methods of applied economics and operations research and the structural-functional analysis common in social science modeling to develop an approach for economic planning and resource allocation for schools and other public sector organizations. (Author)

Solving Differential Equations in R: Package deSolve

Directory of Open Access Journals (Sweden)

Karline Soetaert

2010-02-01

Full Text Available In this paper we present the R package deSolve to solve initial value problems (IVP written as ordinary differential equations (ODE, differential algebraic equations (DAE of index 0 or 1 and partial differential equations (PDE, the latter solved using the method of lines approach. The differential equations can be represented in R code or as compiled code. In the latter case, R is used as a tool to trigger the integration and post-process the results, which facilitates model development and application, whilst the compiled code significantly increases simulation speed. The methods implemented are efficient, robust, and well documented public-domain Fortran routines. They include four integrators from the ODEPACK package (LSODE, LSODES, LSODA, LSODAR, DVODE and DASPK2.0. In addition, a suite of Runge-Kutta integrators and special-purpose solvers to efficiently integrate 1-, 2- and 3-dimensional partial differential equations are available. The routines solve both stiff and non-stiff systems, and include many options, e.g., to deal in an efficient way with the sparsity of the Jacobian matrix, or finding the root of equations. In this article, our objectives are threefold: (1 to demonstrate the potential of using R for dynamic modeling, (2 to highlight typical uses of the different methods implemented and (3 to compare the performance of models specified in R code and in compiled code for a number of test cases. These comparisons demonstrate that, if the use of loops is avoided, R code can efficiently integrate problems comprising several thousands of state variables. Nevertheless, the same problem may be solved from 2 to more than 50 times faster by using compiled code compared to an implementation using only R code. Still, amongst the benefits of R are a more flexible and interactive implementation, better readability of the code, and access to R’s high-level procedures. deSolve is the successor of package odesolve which will be deprecated in

A program plan addressing carpal tunnel syndrome: the utility of King's goal attainment theory.

Science.gov (United States)

Norgan, G H; Ettipio, A M; Lasome, C E

1995-08-01

1. Today's nurse is prepared to address the needs of groups of individuals who share common characteristics or risks (aggregates). Program planning skills and ability to use nursing theory can enhance the nurse's effectiveness in addressing the needs of such aggregates. 2. Carpal tunnel syndrome and other repetitive stress injuries are very costly to industry, both in terms of monetary loss and lost work hours. Such injuries can be reduced in the workplace through careful observation and communication of trends by the nurse. 3. The systems perspective of King's goal attainment theory guided the nurse in problem solving and facilitating the development of a workplace capable of responding to trends as they occur.

Solving the Students’ Problems in Writing Argumentative Essay Through the Provision of Planning

Directory of Open Access Journals (Sweden)

Lestari Setyowati

2017-10-01

Full Text Available Most Indonesian students who are learning English often consider writing as not only the most difficult skill to master, but also a demanding activity. To help them cope these problems, the application of planning in the writing process seems to be a solution. This study attempts to find out howdifferent planning formats can improve EFL students’ writing performance in argumentative essays. The subjects of the studywere the fourth semester students taking essay writing class. The research was conducted from May to June 2015, consisting of three cycles in Classroom Action Research design by using different planning types, namely rough drafting and outlining strategy in which each cycle consisted of two meetings.The students’ compositions were measured by using primary trait scoring rubric for argumentative essay. The result of the study shows that the provision of planning is effective to improve the students’ performance in writing argumentative essay. The effectiveness of different types planningdepends on the students’ preference of which to use.

Verbal problem-solving difficulties in autism spectrum disorders and atypical language development.

Science.gov (United States)

Alderson-Day, Ben

2014-12-01

Children with autism spectrum disorders (ASDs) adopt less efficient strategies than typically developing (TD) peers on the Twenty Questions Task (TQT), a measure of verbal problem-solving skills. Although problems with the TQT are typically associated with executive dysfunction, they have also been reported in children who are deaf, suggesting a role for atypical language development. To test the contribution of language history to ASD problem solving, TQT performance was compared in children with high-functioning autism (HFA), children with Asperger syndrome (AS) and TD children. The HFA group used significantly less efficient strategies than both AS and TD children. No group differences were evident on tests of question understanding, planning or verbal fluency. Potential explanations for differences in verbal problem-solving skill are discussed with reference to the development of inner speech and use of visual strategies in ASD. © 2014 International Society for Autism Research, Wiley Periodicals, Inc.

Numerical Simulation of Different Models of Heat Pipe Heat Exchanger Using AcuSolve

Directory of Open Access Journals (Sweden)

Zainal Nurul Amira

2017-01-01

Full Text Available In this paper, a numerical simulation of heat pipe heat exchanger (HPHE is computed by using CFD solver program i.e. AcuSolve. Two idealized model of HPHE are created with different variant of entry’s dimension set to be case 1 and case 2. The geometry of HPHE is designed in SolidWorks and imported to AcuSolve to simulate the fluid flow numerically. The design of HPHE is the key to provide a heat exchanger system to work proficient as expected. Finally, the result is used to optimize and improving heat recovery systems of the increasing demand for energy efficiency in industry.

Improving of Junior High School Visual Thinking Representation Ability in Mathematical Problem Solving by CTL

Directory of Open Access Journals (Sweden)

Edy Surya

2013-01-01

Full Text Available The students’  difficulty which was found is in the problem of understanding, drawing diagrams, reading the charts correctly, conceptual formal  mathematical understanding, and  mathematical problem solving. The appropriate problem representation is the basic way in order to understand the problem itself and make a plan to solve it. This research was the experimental classroom design with a pretest-posttest control in order to increase the representation of visual thinking ability on mathematical problem solving approach  with  contextual learning. The research instrument was a test, observation and interviews. Contextual approach increases of mathematical representations ability increases in students with high initial category, medium, and low compared to conventional approaches. Keywords: Visual Thinking Representation, Mathematical  Problem Solving, Contextual Teaching Learning Approach DOI: http://dx.doi.org/10.22342/jme.4.1.568.113-126

The Perceptions of the Automotive Supply Industry Related to Information Technology Utilization and Creating Barriers to Competitive Market Entry: A Case Study of the Implications for Strategic Planning

Science.gov (United States)

Cargal, Joseph L.

2010-01-01

The purpose of this study was to examine information technology/systems strategy related factors in the automotive supply industry based on responses to the Strategic Planning and Business Performance Survey provided to automotive suppliers. This population produces supplies to the automotive industry with products valued at hundreds of billions…

INNOVATION IN THE CREATIVE INDUSTRIES – CASE STUDY OF AN EVENT PLANNING COMPANY

Directory of Open Access Journals (Sweden)

Filculescu Adina

2013-07-01

Full Text Available Creative industries have recently gained attention from economists and policy makers as they are said to contribute in a significant way to the economic and technological development of knowledge societies. In Romania there has not been too much talk about the way in which these industries are inserted in the larger chain of industrial innovation, nor about the particularities of their innovation processes which could provide interesting insights for the more traditional industries that are in need of a creativity boost. This paper seeks to fill this gap by offering a process view of business innovation in an event management company, which we argue has many of the characteristics encountered in organizations belonging to creative industries. Through an in-depth case study based on diary entries and interviews we uncover the way in which innovation is understood in this service sector and how this understanding is translated into repeatable business processes. Based on the review of the literature concerned with innovativeness in creative industries we have decided upon four important research themes: people, products, places and policies. By people we refer, first of all, to the entrepreneur who was asked to reflexively answer questions related to passions/interests, formal and non-formal knowledge and social capital in order to assess the entrepreneurial capacity. Also included in this category are the clients of the company and the employees, which represent major players in the innovation process during different stages. Places are important because they are used in the definition of innovation: something new to someone somewhere, and also because they are regarded as a source of inspiration and a possible hindrance in the implementation of the desired event design. Products encompass the raw materials that are used in creating the flower arrangements and the general room décor as well as the technologies that stand behind them, while

Scenario tree airline fleet planning for demand uncertainty

NARCIS (Netherlands)

Repko, M.G.J.; Lopes dos Santos, Bruno F.

2017-01-01

This paper proposes an innovative multi-period modeling approach to solve the airline fleet planning problem under demand uncertainty. The problem is modeled using a scenario tree approach. The tree is composed of nodes, which represent points of decision in multiple time stages of the planning

Some Problems of Industrial Scale-Up.

Science.gov (United States)

Jackson, A. T.

1985-01-01

Scientific ideas of the biological laboratory are turned into economic realities in industry only after several problems are solved. Economics of scale, agitation, heat transfer, sterilization of medium and air, product recovery, waste disposal, and future developments are discussed using aerobic respiration as the example in the scale-up…

Advanced methodology for generation expansion planning including interconnected systems

Energy Technology Data Exchange (ETDEWEB)

Zhao, M; Yokoyama, R; Yasuda, K [Tokyo Metropolitan Univ. (Japan); Sasaki, H [Hiroshima Univ. (Japan); Ogimoto, K [Electric Power Development Co. Ltd., Tokyo (Japan)

1994-12-31

This paper reviews advanced methodology for generation expansion planning including interconnected systems developed in Japan, putting focus on flexibility and efficiency in a practical application. First, criteria for evaluating flexibility of generation planning considering uncertainties are introduced. Secondly, the flexible generation mix problem is formulated as a multi-objective optimization with more than two objective functions. The multi-objective optimization problem is then transformed into a single objective problem by using the weighting method, to obtain the Pareto optimal solution, and solved by a dynamics programming technique. Thirdly, a new approach for electric generation expansion planning of interconnected systems is presented, based on the Benders Decomposition technique. That is, large scale generation problem constituted by the general economic load dispatch problem, and several sub problems which are composed of smaller scale isolated system generation expansion plans. Finally, the generation expansion plan solved by an artificial neural network is presented. In conclusion, the advantages and disadvantages of this method from the viewpoint of flexibility and applicability to practical generation expansion planning are presented. (author) 29 refs., 10 figs., 4 tabs.

Benefits to US industry from involvement in fusion

International Nuclear Information System (INIS)

Waganer, L.M.; Davis, J.W.; Schultz, K.R.

2002-01-01

Over the past decades, fusion has created a cooperative relationship between the DOE national laboratories, leading universities, and high technology industries. This relationship in the fusion community has helped to solve difficult technical problems, which will hopefully lead toward the commercialization of fusion. The US industry, with high technology skills, provides relevant cutting-edge designs, tools, and processes to help solve unique and technically challenging problems associated with fusion energy development. Together, these relationships have developed new and improved technologies and processes to achieve and demonstrate solutions to help advance fusion toward its ultimate goal. The benefits to industry, in terms of commercial applications to their product lines, are subjective. The involvement of US industry has been limited to a few high technology firms, with Boeing and General Atomics being the longest lasting and most involved. Widespread industrial involvement has been constrained with limited funding for the fusion budgets. Even with the funding constraints, industry has contributed to all aspects and systems for MFE and IFE experiments, demonstration reactors, and commercial power plant designs. While several technology and product spin-offs are identified and examined, the more prevalent transfer of information arises from subtle two-way transition of technologies between the fusion related efforts and those of the parent industrial firms. Examples of this transfer include CAD/CAM, independent product team structures, computer simulation/modeling/assessment, extended material property databases, tailored material processing, improved and lower cost fabrication processes, and component designs/applications. Specific examples of transitioned components or technologies involve superconducting magnets, neutral beam components, laser machining, and microwave/RF technologies

Evaluating collaborative planning methods supporting programmebased planning in natural resource management

Czech Academy of Sciences Publication Activity Database

Vacik, H.; Kurttila, M.; Hujala, T.; Khadka, Chiranjeewee; Haara, A.; Pykäläinen, J.; Honkakoski, P.; Wolfslehner, B.

2014-01-01

Roč. 144, NOV 2014 (2014), s. 304-315 ISSN 0301-4797 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073 Institutional support: RVO:67179843 Keywords : participatory planning * group decision making * problem identification * problem modeling * problem solving * natural resource management Subject RIV: EH - Ecology, Behaviour Impact factor: 2.723, year: 2014

Implementation Authentic Task to Enhance Problem Solving and Self-Management for Physics College Students

Science.gov (United States)

Festiyed; Djamas, D.; Pilendia, D.

2018-04-01

The purpose of this study is to enhance the problem solving and self-management abilities of student teachers through individual and group authentic task. Preliminary results showed that the learning outcomes in high category, nevertheless problem solving and self-management abilities are still low and average categories (scattered at interval 40 ≤ N ≤ 65). Initiative to improve this condition is needed. Action research is the alternative solution for that condition through planning, acting, evaluating, and reflecting. This study is allowed in 4 cycles. The acting step result with integrated discuss method, case study, and presentation including self-assessment for individual and group. This method was effective to enhance problem solving and self-management abilities. The final learning outcomes seen from the correlation between student self-assessment and lecture-assessment (r=0.19). Its means there are unidirectional relationship between the result of self-assessment and lecture-assessment. The Conclusion of the research was effective to enhance problem solving and self-management ability.

Industrial ecology: Environmental chemistry and hazardous waste

Energy Technology Data Exchange (ETDEWEB)

Manahan, S.E. [Univ. of Missouri, Columbia, MO (United States). Dept. of Chemistry

1999-01-01

Industrial ecology may be a relatively new concept -- yet it`s already proven instrumental for solving a wide variety of problems involving pollution and hazardous waste, especially where available material resources have been limited. By treating industrial systems in a manner that parallels ecological systems in nature, industrial ecology provides a substantial addition to the technologies of environmental chemistry. Stanley E. Manahan, bestselling author of many environmental chemistry books for Lewis Publishers, now examines Industrial Ecology: Environmental Chemistry and Hazardous Waste. His study of this innovative technology uses an overall framework of industrial ecology to cover hazardous wastes from an environmental chemistry perspective. Chapters one to seven focus on how industrial ecology relates to environmental science and technology, with consideration of the anthrosphere as one of five major environmental spheres. Subsequent chapters deal specifically with hazardous substances and hazardous waste, as they relate to industrial ecology and environmental chemistry.

Chaos theory perspective for industry clusters development

Science.gov (United States)

Yu, Haiying; Jiang, Minghui; Li, Chengzhang

2016-03-01

Industry clusters have outperformed in economic development in most developing countries. The contributions of industrial clusters have been recognized as promotion of regional business and the alleviation of economic and social costs. It is no doubt globalization is rendering clusters in accelerating the competitiveness of economic activities. In accordance, many ideas and concepts involve in illustrating evolution tendency, stimulating the clusters development, meanwhile, avoiding industrial clusters recession. The term chaos theory is introduced to explain inherent relationship of features within industry clusters. A preferred life cycle approach is proposed for industrial cluster recessive theory analysis. Lyapunov exponents and Wolf model are presented for chaotic identification and examination. A case study of Tianjin, China has verified the model effectiveness. The investigations indicate that the approaches outperform in explaining chaos properties in industrial clusters, which demonstrates industrial clusters evolution, solves empirical issues and generates corresponding strategies.

Geomatics, Support for an Efficient Urban Planning

Science.gov (United States)

Moscovici, Anca-Maria; Grecea, Carmen

2017-10-01

Geomatics represents a natural consequence of the accelerated development of information technology; it’s a combination of the basic concepts of Geodesy and Geoinformation and encompasses a wide range of the fields, including tools and techniques used in surveying, mapping, remote sensing, Geographic information systems (GIS), global navigation systems by satellite (GPS), geography, planning and decision making in almost all areas: infrastructure, environment, demography, urbanism, health, sociology, economics, tourism, administration, transportation and many others. As a consequence of the population growth and industrialization, society has become more complex for government and other institutions, with the result that more complex and complicated tasks have to be performed. In order to solve these tasks properly, more and more information is required. Having passed through the stages of agricultural and industrial societies, we now live in an information society. Town planning cadastre defines itself as a particular cadastre, a part of the general one, which involves inventory and systematic evidence of the buildings, fields, networks and utilities inside towns. All these problems regard both technical and economic aspects. In order to automate cadastral activity, the first important procedure is to collect all physical information from a certain territory, which will supply later on the database for town cadastre. Geodetic activity for engineering projects is able to provide accurate solutions for positioning, setting out, control, mapping in order to cover basic needs of land administrative information and decision making for the local authorities. The paper points out the purpose and the importance of town planning cadastre for providing the exact data on the situation of the urban fond in order to identify its needs; it presents the case of Timisoara city located in the western side of Romania that has been chosen as the European Capital of Culture for

A Problem Solving Intervention for hospice caregivers: a pilot study.

Science.gov (United States)

Demiris, George; Oliver, Debra Parker; Washington, Karla; Fruehling, Lynne Thomas; Haggarty-Robbins, Donna; Doorenbos, Ardith; Wechkin, Hope; Berry, Donna

2010-08-01

The Problem Solving Intervention (PSI) is a structured, cognitive-behavioral intervention that provides people with problem-solving coping skills to help them face major negative life events and daily challenges. PSI has been applied to numerous settings but remains largely unexplored in the hospice setting. The aim of this pilot study was to demonstrate the feasibility of PSI targeting informal caregivers of hospice patients. We enrolled hospice caregivers who were receiving outpatient services from two hospice agencies. The intervention included three visits by a research team member. The agenda for each visit was informed by the problem-solving theoretical framework and was customized based on the most pressing problems identified by the caregivers. We enrolled 29 caregivers. Patient's pain was the most frequently identified problem. On average, caregivers reported a higher quality of life and lower level of anxiety postintervention than at baseline. An examination of the caregiver reaction assessment showed an increase of positive esteem average and a decrease of the average value of lack of family support, impact on finances, impact on schedules, and on health. After completing the intervention, caregivers reported lower levels of anxiety, improved problem solving skills, and a reduced negative impact of caregiving. Furthermore, caregivers reported high levels of satisfaction with the intervention, perceiving it as a platform to articulate their challenges and develop a plan to address them. Findings demonstrate the value of problem solving as a psycho-educational intervention in the hospice setting and call for further research in this area.

Universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support

Directory of Open Access Journals (Sweden)

Tkachenko Sergіy A.

2013-03-01

Full Text Available The goal of the article lies in formation of a paradigm (sample of universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support. Analysing, systemising and generalising scientific works of many economists, the article describes ways of solution of the problem of organisation of works on planning and introducing the accounting function at industrial enterprises and in production associations – individual planning, increase of a number of organisations that plan functionally developed accounting subsystem and training of relevant specialists. In the result of the study the article realises an important direction of development in improvement of organisation of accounting and economic and analytical support at industrial enterprises and in production associations based on uniformity of project decisions on the subsystem of the accounting and analytical support and functional development of the process of its creation. The issue of organisation of the calculation process while planning and introducing the accounting function in functionally developed management systems of special purpose of industrial enterprises and production associations is of special urgency among the prospects of further studies in this direction. Further development of accounting can result in replacement of traditional accounting with functionally developed subsystem of accounting and analytical support with intensive use of the concept of methodologically justified paradigmatic approach.

Advanced planning methodologies in food supply chains

DEFF Research Database (Denmark)

Farahani, Poorya

in strategic, tactical, and operational studies, aiming to explain how several key food distribution planning challenges have been dealt with in the Operations Management literature. The next two chapters discuss specific production and distribution planning problems from the foodservice sector. Generic......The food industry is an important sector both because of its direct impacts on the daily lives of people and its large share of GDP compared with other economic sectors. This thesis discusses and develops advanced planning methodologies to optimize operations in food supply chains. From a supply...... chain perspective, this thesis mainly focuses on the part of the chain which starts from the food processing industry: the food processing industry, the distribution industry, and final consumers. In the second chapter of this thesis, a thorough review is presented classifying the related contributions...

Generating Optimal Stowage Plans for Container Vessel Bays

DEFF Research Database (Denmark)

Delgado-Ortegon, Alberto; Jensen, Rune Møller; Schulte, Christian

2009-01-01

collaboration to date with a liner shipping company on automated stowage planning. We then show how to solve this model ef- ficiently in - to our knowledge - the first application of CP to stowage planning using state-of-the-art techniques such as extensive use of global constraints, viewpoints, static...

Artificial Intelligence Research Branch future plans

Science.gov (United States)

Stewart, Helen (Editor)

1992-01-01

This report contains information on the activities of the Artificial Intelligence Research Branch (FIA) at NASA Ames Research Center (ARC) in 1992, as well as planned work in 1993. These activities span a range from basic scientific research through engineering development to fielded NASA applications, particularly those applications that are enabled by basic research carried out in FIA. Work is conducted in-house and through collaborative partners in academia and industry. All of our work has research themes with a dual commitment to technical excellence and applicability to NASA short, medium, and long-term problems. FIA acts as the Agency's lead organization for research aspects of artificial intelligence, working closely with a second research laboratory at the Jet Propulsion Laboratory (JPL) and AI applications groups throughout all NASA centers. This report is organized along three major research themes: (1) Planning and Scheduling: deciding on a sequence of actions to achieve a set of complex goals and determining when to execute those actions and how to allocate resources to carry them out; (2) Machine Learning: techniques for forming theories about natural and man-made phenomena; and for improving the problem-solving performance of computational systems over time; and (3) Research on the acquisition, representation, and utilization of knowledge in support of diagnosis design of engineered systems and analysis of actual systems.

Workflow Agents vs. Expert Systems: Problem Solving Methods in Work Systems Design

Science.gov (United States)

Clancey, William J.; Sierhuis, Maarten; Seah, Chin

2009-01-01

During the 1980s, a community of artificial intelligence researchers became interested in formalizing problem solving methods as part of an effort called "second generation expert systems" (2nd GES). How do the motivations and results of this research relate to building tools for the workplace today? We provide an historical review of how the theory of expertise has developed, a progress report on a tool for designing and implementing model-based automation (Brahms), and a concrete example how we apply 2nd GES concepts today in an agent-based system for space flight operations (OCAMS). Brahms incorporates an ontology for modeling work practices, what people are doing in the course of a day, characterized as "activities." OCAMS was developed using a simulation-to-implementation methodology, in which a prototype tool was embedded in a simulation of future work practices. OCAMS uses model-based methods to interactively plan its actions and keep track of the work to be done. The problem solving methods of practice are interactive, employing reasoning for and through action in the real world. Analogously, it is as if a medical expert system were charged not just with interpreting culture results, but actually interacting with a patient. Our perspective shifts from building a "problem solving" (expert) system to building an actor in the world. The reusable components in work system designs include entire "problem solvers" (e.g., a planning subsystem), interoperability frameworks, and workflow agents that use and revise models dynamically in a network of people and tools. Consequently, the research focus shifts so "problem solving methods" include ways of knowing that models do not fit the world, and ways of interacting with other agents and people to gain or verify information and (ultimately) adapt rules and procedures to resolve problematic situations.

Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Peters, Dietmar

2010-11-17

The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

Comparison the Executive Functions of Inhibition and Problem Solving in Adolescents with and Without Substance Abuse

Directory of Open Access Journals (Sweden)

Tahereh masoomi mofrad

2015-03-01

Full Text Available Executive functions are self-regulated functions and show the ability to inhibition, self-changing, planning, organization, using the working memory, solving problems and targeting for homework and school activities. This study compares the executive functions of inhibition and problem solving in adolescents with and without substance abuse. In this causal-comparative study, 15 adolescents with substance abuse and 15 normal adolescents were selected which matched each other with the same age, sex and education. The research tools were Wisconsin Card, was used for assessing the inhibition executive functions, and Heppner and Petersen Questionnaires for problem solving. The results showed that there were statistically significant differences between groups between average score of inhibition executive functions and solving problem (except trend– avoid component. There were not statistically significant differences in the average score of inhibition executive functions and solving problem according to age, sex and education. It is concluded that the drug addicts are weaker than those without substance abuse based on the inhibition executive function and problem solving. These findings can be used for the prevention program.

The production and operation of the nuclear industry road emergency response plan (NIREP)

International Nuclear Information System (INIS)

Higson, J.

1991-01-01

For many years, radioactive material, ranging from small sources used for medical and commercial purposes to large consignments of irradiated fuel, has been safely moved by road in Great Britain. All such movements are controlled by law and have to meet clearly specified safety requirements concerning packaging and shielding to ensure that if the transporting vehicle is involved in an accident, there is no increase in the hazards involved because of the nature of its load. There are currently some 40,000 movements by road every year, but over more than 25 years, there has never been an accident which has led to any significant radiological impact to members of the public. A national scheme to provide contingency arrangements in the event of a road accident involving radioactive materials has now been set up by the major users and consignors of radioactive material. Called NIREP (Nuclear Industry Road Emergency Response Plan), the member industries have agreed immediately to despatch, from the nearest organisation to the incident, qualified health physicist personnel to deal with any incident involving radioactive material belonging to (or consigned by) any of the participating companies. With their widespread location of establishments, all parts of the UK mainland are covered. Vehicles covered by the scheme will display a NIREP placard, thus giving the Police, or other emergency services, an emergency telephone number of a coordinating centre and information on the site responsible for the load. (author)

Planning games for the electricity supply industry

International Nuclear Information System (INIS)

Weber, K.

1977-01-01

The author shows the main differences between the electricity supply planning game for the Bernische Kraftwerke AG (PEW-1) and that for the Rheinisch-Westfaelische Elektrizitaetswerke AG (PEW-2). (orig.) [de

Nuclear power - strategic planning for the next generation

International Nuclear Information System (INIS)

Turner, K.H.

1989-01-01

Regardless of the real or perceived causes of the nuclear power industry's current difficulties, a number of recent trends-increasing electricity demand, foreign oil dependency, and attention paid to acid rain and the greenhouse effect-taken together, point of the most favorable atmosphere in recent history for nuclear power. Already, serious public discussion of its advantages have begun anew. Thus, the time is ripe to consider the developmental structure of nuclear power's next generation. Although much uncertainty still surrounds the nuclear industry, valuable lessons have been learned, and the evolution of the industry from this point cannot be left to chance. The purpose of this paper is to discuss a framework for nuclear power strategic planning activities. The strategic planning objectives outlined in this paper span issues that affect virtually every aspect of the nuclear power industry. Piecemeal responses to the vagaries of random stimuli will not be adequate. A proactive, integrated, industry-wide initiative-an Institute of Nuclear Power Planning, actively supported by the members of the industry-should be undertaken immediately to fill the strategic planning role. In so doing, the industry will not only be acting in its own best interest but will also be helping the nation realize the real and important benefits of its nuclear power technology

Phase Transitions in Planning Problems: Design and Analysis of Parameterized Families of Hard Planning Problems

Science.gov (United States)

Hen, Itay; Rieffel, Eleanor G.; Do, Minh; Venturelli, Davide

2014-01-01

There are two common ways to evaluate algorithms: performance on benchmark problems derived from real applications and analysis of performance on parametrized families of problems. The two approaches complement each other, each having its advantages and disadvantages. The planning community has concentrated on the first approach, with few ways of generating parametrized families of hard problems known prior to this work. Our group's main interest is in comparing approaches to solving planning problems using a novel type of computational device - a quantum annealer - to existing state-of-the-art planning algorithms. Because only small-scale quantum annealers are available, we must compare on small problem sizes. Small problems are primarily useful for comparison only if they are instances of parametrized families of problems for which scaling analysis can be done. In this technical report, we discuss our approach to the generation of hard planning problems from classes of well-studied NP-complete problems that map naturally to planning problems or to aspects of planning problems that many practical planning problems share. These problem classes exhibit a phase transition between easy-to-solve and easy-to-show-unsolvable planning problems. The parametrized families of hard planning problems lie at the phase transition. The exponential scaling of hardness with problem size is apparent in these families even at very small problem sizes, thus enabling us to characterize even very small problems as hard. The families we developed will prove generally useful to the planning community in analyzing the performance of planning algorithms, providing a complementary approach to existing evaluation methods. We illustrate the hardness of these problems and their scaling with results on four state-of-the-art planners, observing significant differences between these planners on these problem families. Finally, we describe two general, and quite different, mappings of planning

Addressing Responsible Research and Innovation to Industry

DEFF Research Database (Denmark)

Yaghmaei, Emad

2015-01-01

Responsible research and innovation (RRI) is taking a role to assist all types of stakeholders including industry to move research and innovation initiatives to responsible manner for tackling grand challenges. The literature on RRI focuses little on how industry can implement RRI principles...... models of corporate social responsibility (CSR) literature. Drawing on these models, this study develops stages and dimensions of RRI for discussing why industry should become engaged in RRI, how industry can embed RRI principles into research and innovation processes, how companies progress from one RRI....... In solving such gap in the literature, this article constructs a solid framework that provides a conceptual starting point for future research on levels of RRI. It draws a fundamental path to align industrial activities with environmental and societal needs. The framework develops a normatively grounded...

Investigating critical success factors in tile industry

Directory of Open Access Journals (Sweden)

Davood Salmani

2014-04-01

Full Text Available This paper presents an empirical investigation to determine critical success factors influencing the success of tile industry in Iran. The study designs a questionnaire in Likert scale, distributes it among some experts in tile industry. Using Pearson correlation test, the study has detected that there was a positive and meaningful relationship between marketing planning and the success of tile industry (r = 0.312 Sig. = 0.001. However, there is not any meaningful relationship between low cost production and success of tile industry (r = 0.13 Sig. = 0.12 and, there is a positive and meaningful relationship between organizational capabilities and success of tile industry (r = 0.635 Sig. = 0.000. Finally, our investigation states that technology and distributing systems also influence on the success of tile industry, positively. The study has also used five regression analyses where the success of tile industry was the dependent variable and marketing planning, low cost production and organizational capabilities are independent variables and the results have confirmed some positive and meaningful relationship between the successes of tile industry with all independent variables.

Measuring health-related problem solving among African Americans with multiple chronic conditions: application of Rasch analysis.

Science.gov (United States)

Fitzpatrick, Stephanie L; Hill-Briggs, Felicia

2015-10-01

Identification of patients with poor chronic disease self-management skills can facilitate treatment planning, determine effectiveness of interventions, and reduce disease complications. This paper describes the use of a Rasch model, the Rating Scale Model, to examine psychometric properties of the 50-item Health Problem-Solving Scale (HPSS) among 320 African American patients with high risk for cardiovascular disease. Items on the positive/effective HPSS subscales targeted patients at low, moderate, and high levels of positive/effective problem solving, whereas items on the negative/ineffective problem solving subscales mostly targeted those at moderate or high levels of ineffective problem solving. Validity was examined by correlating factor scores on the measure with clinical and behavioral measures. Items on the HPSS show promise in the ability to assess health-related problem solving among high risk patients. However, further revisions of the scale are needed to increase its usability and validity with large, diverse patient populations in the future.

Material requirements planning using uncertain data

OpenAIRE

Ramonas, Martynas

2007-01-01

Last decennials in many companies information like strategical reservoir bursted into preponderant positions. Strategical information systems which withstand competition hold information place like this and help to survive for companies. First integrated IS which upstarted to computerize the planning of companies activities, are material recourse planning systems (MRP). It helps for company to solve the serious problems. Strategical information systems change the aims, processes of business, ...

LABOUR PROTECTION AND SAFETY IN THE BREWING INDUSTRY

Directory of Open Access Journals (Sweden)

Irina Melnik

2016-10-01

Full Text Available The article describes the quantification of the level of safety in the brewing industry, which allows determining the contribution of each employee to ensure healthy and safe working conditions. Factors have also been shown to affect the safety of each of the employees. Knowledge of the characteristics and limits of each of the factors makes it possible to secure workflow and solve potential problems early. Previously considered a comprehensive approach that allows full control of the security protecting the entire brewing industry. Efficient and safe work is possible only if the working environment at the workplace to meet all the requirements of international standards in the field of occupational safety and health. Therefore, each category from a number of activities, which can significantly reduce the level of injury, and ending with the characteristics of each of the factors for drawing up a plan to ensure the maximum protection of the company's employees, was discussed. Chemical, physical, biological and psychophysical factors may exist alone or in combination with each other. It is therefore important to identify in advance all of them and to take all measures relating to ensure safe working conditions in each of the processes. Separately considered optimal and allowable values of temperature, relative humidity and air velocity in the working area of industrial premises. The parameters were established for the purpose of continuous monitoring in order to ensure comfortable and safe work environment for each employee. In some cases it is necessary to consult with technicians to get the full picture of the possible threats posed by each type of equipment. Especially dangerous in terms of occupational safety and health in the brewing industry is a cooking workshop, where the air temperature in the working area is significantly increased, as well as the bottling plant (noisy.

Optimal contracts decision of industrial customers

International Nuclear Information System (INIS)

Tsay, M.-T.; Lin, W.-M.; Lee, J.-L.

2001-01-01

This paper develops a software package to calculate the optimal contract capacities for industrial customers. Based on the time-of-use (TOU) rates employed by the Taiwan Power Company, the objective function is formulated, to minimize the electricity bill of industrial customers during the whole year period. Evolutionary programming (EP) was adopted to solve this problem. Users can get the optimal contract capacities for the peak load, semi-peak load, and off-peak load, respectively. Practical load consumption data were used to prove the validity of this program. Results show that the software developed in this paper can be used as a useful tool for industrial customers in selecting contract capacities to curtail the electricity bill. (author)

Problem Solving and Critical Thinking Skills of Undergraduate Nursing Students

Directory of Open Access Journals (Sweden)

Yalçın KANBAY

2013-12-01

Full Text Available Due to the fact that critical thinking and problem solving skills are essential components of educational and social lives of individuals, this present study which investigate critical thinking and problem solving skills of undergraduate students of nursing was planned. This is a descriptive study. The study population consisted of undergraduate nursing students of a university during the 2011-2012 academic year. Any specific sampling method was not determined and only the voluntary students was enrolled in the study . Several participants were excluded due to incomplete questionnaires, and eventually a total of 231 nursing students were included in the final sampling. Socio Demographic Features Data Form and the California Critical Thinking Disposition Scale and Problem Solving Inventory were used for data collection. The mean age of 231 subjects (148 girls, 83 boys was 21.34. The mean score of critical thinking was 255.71 for the first-grade, 255.57 for the second-grade, 264.73 for the third-grade, and 256.468 for the forth-grade students. The mean score of critical thinking was determined as 257.41 for the sample, which can be considered as an average value. Although there are mean score differences of critical thinking between the classes , they were not statistically significant (p> 0.05. With regard to the mean score of problem solving, the first-grade students had 92.86, the second-grade students had 94. 29, the third-grade students had 87.00, and the forth-grade students had 92.87. The mean score of problem solving was determined as 92.450 for the sample. Although there are differences between the classes in terms of mean scores of problem solving, it was not found statistically significant (p> 0.05. In this study, statistically significant correlation could not be identified between age and critical thinking skills of the subjects (p>0.05. However, a negative correlation was identified at low levels between critical thinking skills and

Work Integrated Learning Competencies: Industrial Supervisors' Perspectives

Science.gov (United States)

Makhathini, Thobeka Pearl

2016-01-01

Research on student-learning outcomes indicates that university graduates do not possess relevant skills required by the industry such as leadership, emotional intelligence, problem solving, communication, decision-making skills and the ability to function in a multicultural environment. Currently, engineering graduates are expected to perform…

Procurement planning in oil refining industries considering blending operations

DEFF Research Database (Denmark)

Oddsdottir, Thordis Anna; Grunow, Martin; Akkerman, Renzo

2013-01-01

This paper addresses procurement planning in oil refining, which has until now only had limited attention in the literature. We introduce a mixed integer nonlinear programming (MINLP) model and develop a novel two-stage solution approach, which aims at computational efficiency while addressing...... parameters than in previous literature. The developed approach is tested using historical data from Statoil A/S as well as through a comprehensive numerical analysis. The approach generates a feasible procurement plan within acceptable computation time, is able to quickly adjust an existing plan to take...

Pengembangan Industri Manufaktur Melalui Komputerisasi

OpenAIRE

Adil, Malikul

2007-01-01

To development of industrial engineering in computerization must have been manufacturing and management systems and its application in company organization. Manufacturing system as useful reference by business scientists and practitioners or anyone who seeks for information to develop Enterprise Resource Planning (ERP) through close loop process Manufacturing Resource Planning (MRP II). This article provides in-depth knowledge of the Enterprise Resource Planning methodology and its applicati...

Local Environmental Action Plan of municipalities of Centar, Zrnovci, Veles and Gevgelija (Republic of Macedonia)

International Nuclear Information System (INIS)

1998-08-01

The Regional Environmental Center for Central and Eastern Europe (REC) is an independent, international organization established in 1990 by Hungary, the United States and the Commission of the European Communities. Twelve countries have since joined these founding sponsors. All of the REC's programs are unified in their resolve to promote regional cooperation among diverse interest groups in Central and Eastern Europe, to build the capacity of stake holders, to solve environmental problems, and to promote the development of a civil society. The book provides description of environmental action plans (LEAPs) of four different municipalities in Macedonia, identified by REC in collaboration with the Ministry for Urban Planning, Construction and Environmental of Republic of Macedonia. These municipalities are: 1) Centar (Skopje), which occupies central part of the capital of Macedonia, as a typical urban area; 2) Veles as a typical industrial area; 3) Zrnovci as a typical agricultural area; 4) Gevgelija as a transboundary and transit area

Partnership with Industry: Film Production Technology.

Science.gov (United States)

Rietveld, Richard; And Others

The 1988 final report of a task force from the Florida Postsecondary Education Planning Commission stated that in order to ensure continued growth of the motion picture film industry in the state, the postsecondary community must provide a well-trained and competent work force adept in all aspects of the industry. The film industry is a growing…

The Effect of Metacognitive Instruction on Problem Solving Skills in Iranian Students of Health Sciences.

Science.gov (United States)

Safari, Yahya; Meskini, Habibeh

2015-05-17

Learning requires application of such processes as planning, supervision, monitoring and reflection that are included in the metacognition. Studies have shown that metacognition is associated with problem solving skills. The current research was conducted to investigate the impact of metacognitive instruction on students' problem solving skills. The study sample included 40 students studying in the second semester at Kermanshah University of Medical Sciences, 2013-2014. They were selected through convenience sampling technique and were randomly assigned into two equal groups of experimental and control. For the experimental group, problem solving skills were taught through metacognitive instruction during ten two-hour sessions and for the control group, problem solving skills were taught via conventional teaching method. The instrument for data collection included problem solving inventory (Heppner, 1988), which was administered before and after instruction. The validity and reliability of the questionnaire had been previously confirmed. The collected data were analyzed by descriptive statistics, mean and standard deviation and the hypotheses were tested by t-test and ANCOVA. The findings of the posttest showed that the total mean scores of problem solving skills in the experimental and control groups were 151.90 and 101.65, respectively, indicating a significant difference between them (pproblem solving skills and its components, including problem solving confidence, orientation-avoidance coping style and personal control (pproblem solving skills and is required to enhance academic achievement, metacognitive strategies are recommended to be taught to the students.

Water requirements of selected industries

Science.gov (United States)

,; Mussey, Orville D.; Conklin, Howard L.; Durfor, Charles N.; Otts, Louis Ethelbert; Walling, Faulkner B.

1955-01-01

The early industries in America generally were established when and where demands for the products of industry arose. Most of the early industries were so located that their increasing requirements for transportation, raw materials, market, labor, and water supply could be satisfied economically. Many of these original plant locations have continued as modern industrial centers and their output has increased manyfold in meeting the demands of our growing Nation. The recent and current industrial expansion and the trend toward the growth of chemical industries, many Of which are heavy users of water, has resulted in a tremendous increase in the total withdrawal of water for industrial use as well as a large increase in the per capita use of water. This increase in industrial water requirement has strained the capacity of the developed water supplies in many areas, and in some instances the adequacy of the potential water supplies is questionable. The Geological Survey is engaged in preparing and publishing a series of reports describing the developed and undeveloped water resources of many important industrial areas. This work was started initially at the request of the National Securities Resources Board as a means to insure that water supplies are adequate for our rapidly expanding industrial development. Although many factors contribute to establishing the feasibility or even the limits of future industrial development, the one relating to available water supply is extremely important. A knowledge of the water requirements of various industries is valuable therefore in planning the logical development in any area where water supply is a critical factor. Thus far very little suitable information on the water requirements of our major industries is available for general planning. An inventory of unit water-use values in industry therefore would be generally helpful and also might tend to stimulate water-conservation methods. To obtain such information

Environmental planning related to the oil industry activities at Maracaibo Lake Venezuela

International Nuclear Information System (INIS)

German, F.

1993-01-01

Maracaibo Lake has been the center of most of the hydrocarbon exploration and production activities in Venezuela since the early twenties, with a total cumulative oil extraction of nearly 40 billion barrels. The intensive activities related to production have brought a wide variety of ecosystem perturbations, as a consequence of the construction of facilities for exploration, transport, treatment, storage, and oil refining, as well as the generation of effluents, emissions, and solid wastes therein associated. The Venezuelan Petroleum Corporation (PDVSA) has recognized the importance of preventing further potential damage from its current operations and future expansions, with an additional concern for restoring affected areas. Herein, actual and future restoration/mitigation environmental planning will be discussed, emphasizing a research program focused on the Maracaibo Lake region, being conducted by PDVSA's R ampersand D Corporative branch. Research main objective is to gather, for PDVSA operating companies, a priority setting, as a function of environmental or ecological risks, related to the oil industry activities. To this end, efforts will be directed from a multidisciplinary approach, taking into account some of the major links structuring ecosystem complexity

Opinion presented on behalf of the Economic Affairs Commission on the Finance bill for 2011 (n. 2824), volume 2 Ecology, Sustainable Development and Land Planning, industry and energy

International Nuclear Information System (INIS)

2010-01-01

In her introduction, the author gives a description of the difficult context and situation faced by the industrial sector in France, notably because of the growing activity of emerging countries like China, India or Brazil, but also because of the weakness of research industrial valorization and of the innovation policy (losing the manufacturing capacity leads to losing the capacity for innovation). Then, after a critic of the current policy (reform of the professional tax, a boosting plan with limited results), she comments the contents of public programmes concerning firm and job development, energy, the steering of ecology, energy, sustainable development and sea policies, research in energy and sustainable development and land planning. She comments ways and tools aimed at supporting industrial jobs through innovation: the FSI (strategic investment fund), the competitiveness poles, specific aids to small and medium sized enterprises, tax credit related to research activities. She addresses the energy sector, questioning the French supremacy in the nuclear energy and the increase of electricity price, and criticizing the management of the development of renewable energies (high expenses for no industrial development)

Consumer goods and food industry, local industry of the western region of ussr in the times of «developed socialist society»

Directory of Open Access Journals (Sweden)

Oleh M. Malyarchuk

2016-01-01

Full Text Available The economy of the Ukrainian SSR and the western region, according to most indicators, continued to develop on its own basis, solving ordinary socio-political and socio-economic challenges. In 1960-1980s of the twentieth century the two types of reproduction were combined: extensive sources of growth (exploitation of new natural and labour resources, and intensive ones which improved production structure and management system. Western region of the republic developed rapidly, engineering and instrumentation grew, as well as oil and gas and chemical industries, together with consumer goods and food industry, local industry. However, low quality, inadequate technologies reduced the positive impact of these industries on economic efficiency. In addition, other problems arose. As a result tasks of economic development planned by the third Programme of the Communist Party of the Soviet Union turned out to be unfulfilled. Despite a slight increase in industrial growth its rate declined. A large-scale restructuring of the economy on resource conservation, introduction of new technologies began in industrialized countries. Scientific progress in the USSR stalled. It should be noted that attempts to improve the situation were done over and over, but they were not in the economic and scientific spheres but in the political one. The crisis in industry and agriculture of the USSR in the second half of 1980s went far beyond purely production problems, took on socio-economic character and became threatening as for the provision of the country with necessary goods and food, creating social tension. In the late 1980s food consumption per capita decreased, and deficit in manufactured goods increased. Investing activities of villages almost stopped. Employees from the village began to massively lose stable jobs and reliable source of income. The decline in agricultural production led to idle capacity of the food and consumer goods industry, decline in employment

Ethics and the industrial society

International Nuclear Information System (INIS)

Ratz, E.

1992-01-01

Technical developments, both good and bad, today have much further-reaching implications than in former times. Against this background, it is only natural that decision-makers in industry and economics should discuss problems of ethics while the guardians of ethics have discovered their interest in technology. The problems now arising can only be solved in a well-founded dialogue. (orig./HP) [de

A Stochastic Programming Approach for a Multi-Site Supply Chain Planning in Textile and Apparel Industry under Demand Uncertainty

Directory of Open Access Journals (Sweden)

Houssem Felfel

2015-11-01

Full Text Available In this study, a new stochastic model is proposed to deal with a multi-product, multi-period, multi-stage, multi-site production and transportation supply chain planning problem under demand uncertainty. A two-stage stochastic linear programming approach is used to maximize the expected profit. Decisions such as the production amount, the inventory level of finished and semi-finished product, the amount of backorder and the quantity of products to be transported between upstream and downstream plants in each period are considered. The robustness of production supply chain plan is then evaluated using statistical and risk measures. A case study from a real textile and apparel industry is shown in order to compare the performances of the proposed stochastic programming model and the deterministic model.

On Planning and Managing the Preservation of Historical Buildings

Directory of Open Access Journals (Sweden)

Č. Jarský

2003-01-01

Full Text Available The process of preserving and reconstructing historical buildings poses several specific questions and raises problems which must be solved in the planning and management stage of the building process - from questions of architectural and art-historical significance, via the future purpose of use of the building, links to the surrounding buildings, environmental questions, questions of cost, time analysis, and quality assurance problems. Many of these problems can be solved with the help of a computer model of the course of the rehabilitation and reconstruction of the building created by a construction technology network diagram. The CONTEC integrated project planning, management and quality control system based on these diagrams has been used for bidding, planning and managing the reconstruction process of several significant historical buildings in Prague and other cities.

The results of STEM education methods for enhancing critical thinking and problem solving skill in physics the 10th grade level

Science.gov (United States)

Soros, P.; Ponkham, K.; Ekkapim, S.

2018-01-01

This research aimed to: 1) compare the critical think and problem solving skills before and after learning using STEM Education plan, 2) compare student achievement before and after learning about force and laws of motion using STEM Education plan, and 3) the satisfaction of learning by using STEM Education. The sample used were 37 students from grade 10 at Borabu School, Borabu District, Mahasarakham Province, semester 2, Academic year 2016. Tools used in this study consist of: 1) STEM Education plan about the force and laws of motion for grade 10 students of 1 schemes with total of 14 hours, 2) The test of critical think and problem solving skills with multiple-choice type of 5 options and 2 option of 30 items, 3) achievement test on force and laws of motion with multiple-choice of 4 options of 30 items, 4) satisfaction learning with 5 Rating Scale of 20 items. The statistics used in data analysis were percentage, mean, standard deviation, and t-test (Dependent). The results showed that 1) The student with learning using STEM Education plan have score of critical think and problem solving skills on post-test higher than pre-test with statistically significant level .01. 2) The student with learning using STEM Education plan have achievement score on post-test higher than pre-test with statistically significant level of .01. 3) The student'level of satisfaction toward the learning by using STEM Education plan was at a high level (X ¯ = 4.51, S.D=0.56).

Financial planning for young households

DEFF Research Database (Denmark)

Pedersen, Anne Marie Boiden; Weissensteiner, Alex; Poulsen, Rolf

2013-01-01

We analyze the financial planning problems of young households whose main decisions are how to finance the purchase of a house (liabilities) and how to allocate investments in pension savings schemes (assets). The problems are solved using a multi-stage stochastic programming model where...

Mathematical learning disabilities and attention deficit and/or hyperactivity disorder: A study of the cognitive processes involved in arithmetic problem solving.

Science.gov (United States)

Iglesias-Sarmiento, Valentín; Deaño, Manuel; Alfonso, Sonia; Conde, Ángeles

2017-02-01

The purpose of this study was to examine the contribution of cognitive functioning to arithmetic problem solving and to explore the cognitive profiles of children with attention deficit and/or hyperactivity disorder (ADHD) and with mathematical learning disabilities (MLD). The sample was made up of a total of 90 students of 4th, 5th, and 6th grade organized in three: ADHD (n=30), MLD (n=30) and typically achieving control (TA; n=30) group. Assessment was conducted in two sessions in which the PASS processes and arithmetic problem solving were evaluated. The ADHD group's performance in planning and attention was worse than that of the control group. Children with MLD obtained poorer results than the control group in planning and simultaneous and successive processing. Executive processes predicted arithmetic problem solving in the ADHD group whereas simultaneous processing was the unique predictor in the MLD sample. Children with ADHD and with MLD showed characteristic cognitive profiles. Groups' problem-solving performance can be predicted from their cognitive functioning. Copyright © 2016 Elsevier Ltd. All rights reserved.

AIF programs supporting industry self-improvement

International Nuclear Information System (INIS)

Szalay, R.A.; Bivens, A.C.

1985-01-01

The Atomic Industrial Forum (AIF) report ''Nuclear Power in America's Future'' identifies those actions that must be taken by both government and industry if the nuclear power option is to be preserved. This includes initiatives that: 1) reduce construction costs and lead times; 2) establish a national energy policy that reflects the role of electricity and the nuclear power component; 3) provide better financial arrangements; 4) reform licensing and regulation; 5) enhance the light water reactor design; 6) inform the public on the benefits and contributions of nuclear power; and 7) complete the fuel cycle. In attempting to solve nuclear power's problems, the AIF has programs that support and push these needed actions. Much of the initiative must be taken by industry to enhance the nuclear power option. This paper discusses some AIF initiatives and programs that support industry self-improvement

International Photovoltaic Program Plan

Energy Technology Data Exchange (ETDEWEB)

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-12-01

The International Photovoltaics Program Plan is in direct response to the Solar Photovoltaic Energy Research, Development, and Demonstration Act of 1978 (PL 95-590). As stated in the Act, the primary objective of the plan is to accelerate the widespread use of photovoltaic systems in international markets. Benefits which could result from increased international sales by US companies include: stabilization and expansion of the US photovoltaic industry, preparing the industry for supplying future domestic needs; contribution to the economic and social advancement of developing countries; reduced world demand for oil; and improvements in the US balance of trade. The plan outlines programs for photovoltaic demonstrations, systems developments, supplier assistance, information dissemination/purchaser assistance, and an informaion clearinghouse. Each program element includes tactical objectives and summaries of approaches. A program management office will be established to coordinate and manage the program plan. Although the US Department of Energy (DOE) had the lead responsibility for preparing and implementing the plan, numerous federal organizations and agencies (US Departments of Commerce, Justice, State, Treasury; Agency for International Development; ACTION; Export/Import Bank; Federal Trade Commission; Small Business Administration) were involved in the plan's preparation and implementation.

Nuclear emergency planning and response in industrial areas. Results of a qualitative study in 9 industrial companies

International Nuclear Information System (INIS)

Pauwels, N.; Hardeman, F.; Soudan, K.

1998-11-01

Substantial economic losses and potential dangerous situations may result when industrial companies unexpectedly have to shut down their activities in an abrupt way. With respect to the industrial companies located in the Antwerp harbour region, the reason for such an unplanned shut-down could be the decision to (preventively) evacuate their workers, or to have them sheltered, in case of an alarm situation at a nearby nuclear power plant of Doel or in any other adjacent industrial factory. Between January and August 1998, the prevention advisors of nine industrial companies have been interviewed to gain insight in the scale and relative importance of several economic costs and practical difficulties that may arise. Moreover, the appropriateness of the existing nuclear emergency response decision structure and intervention philosophy was investigated. The main conclusions drawn from the interviews are reported. Recommendations are made to increase the efficiency of implementing countermeasures in industrial areas

Nuclear emergency planning and response in industrial areas. Results of a qualitative study in 9 industrial companies

Energy Technology Data Exchange (ETDEWEB)

Pauwels, N.; Hardeman, F.; Soudan, K

1998-11-01

Substantial economic losses and potential dangerous situations may result when industrial companies unexpectedly have to shut down their activities in an abrupt way. With respect to the industrial companies located in the Antwerp harbour region, the reason for such an unplanned shut-down could be the decision to (preventively) evacuate their workers, or to have them sheltered, in case of an alarm situation at a nearby nuclear power plant of Doel or in any other adjacent industrial factory. Between January and August 1998, the prevention advisors of nine industrial companies have been interviewed to gain insight in the scale and relative importance of several economic costs and practical difficulties that may arise. Moreover, the appropriateness of the existing nuclear emergency response decision structure and intervention philosophy was investigated. The main conclusions drawn from the interviews are reported. Recommendations are made to increase the efficiency of implementing countermeasures in industrial areas.

Building up a reactor industry

International Nuclear Information System (INIS)

Mattick, W.

1977-01-01

The reactor industry has in common with any other industry the need to meet a requirement in a specific market with a specific product. However, it is distinguished from old established industries by its origins, its young age and by the fact that most of its development costs were paid by the governments in all developed countries. A comparison of the origins and the history of companies in this field in the United Kingdom , France and the Federal Republic of Germany should merit special interest. A historical survey of this kind is presented in this contribution. If a technological project acquires international ramifications in order to diminish the market risk, national goals frequently must give way to a common objective. Problems involving practical application must be solved by joint efforts of industrial consortia. In this way, these industries can both offer a commercially viable product and take into account national characteristics or habits in such a way as to improve the overall cost-benefit situation with all parties involved. (orig.) [de

Security intelligence a practitioner's guide to solving enterprise security challenges

CERN Document Server

Li, Qing

2015-01-01

Identify, deploy, and secure your enterprise Security Intelligence, A Practitioner's Guide to Solving Enterprise Security Challenges is a handbook for security in modern times, against modern adversaries. As leaders in the design and creation of security products that are deployed globally across a range of industries and market sectors, authors Qing Li and Gregory Clark deliver unparalleled insight into the development of comprehensive and focused enterprise security solutions. They walk you through the process of translating your security goals into specific security technology domains, fo

Heuristic for solving capacitor allocation problems in electric energy radial distribution networks

Directory of Open Access Journals (Sweden)

Maria A. Biagio

2012-04-01

Full Text Available The goal of the capacitor allocation problem in radial distribution networks is to minimize technical losses with consequential positive impacts on economic and environmental areas. The main objective is to define the size and location of the capacitors while considering load variations in a given horizon. The mathematical formulation for this planning problem is given by an integer nonlinear mathematical programming model that demands great computational effort to be solved. With the goal of solving this problem, this paper proposes a methodology that is composed of heuristics and Tabu Search procedures. The methodology presented explores network system characteristics of the network system reactive loads for identifying regions where procedures of local and intensive searches should be performed. A description of the proposed methodology and an analysis of computational results obtained which are based on several test systems including actual systems are presented. The solutions reached are as good as or better than those indicated by well referenced methodologies. The technique proposed is simple in its use and does not require calibrating an excessive amount of parameters, making it an attractive alternative for companies involved in the planning of radial distribution networks.

Uranium industry annual, 1986

International Nuclear Information System (INIS)

1987-01-01

Uranium industry data collected in the EIA-858 survey provide a comprehensive statistical characterization of annual activities of the industry and include some information about industry plans over the next several years. This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities utility market requirements and related topics

Industrial developments challenging planning and research endeavours around Songkla Lake

DEFF Research Database (Denmark)

Jørgensen, Ulrik; Lauridsen, Erik Hagelskjær

2004-01-01

had several broad committees engaged in supporting these planning issues and resolve the conflicts be-tween different stakeholder interests in the regions development. The paper gives an overview over the types of problems that have been addressed in these major plans and studies and the types......, but the specific outcomes of the planning and the scientific result seem to be rather limited. In an attempt to find an explanation to this gap between planning and advice on one hand and the implementation on the other, it is important not only to look for policy answers. These would typically be ‘lack...

Sales and operations planning

DEFF Research Database (Denmark)

Kjellsdotter, Linea; Dukovska-Popovska, Iskra; Kaipia, Riikka

2013-01-01

This paper explores how the use of sales and operations planning (S&OP) may deal with the challenges set by the planning environment by investigating S&OP at four Scandinavian industrial food producers. Variables connected to the product and market, e.g. perishability, customer service elements...

The electron accelerator in industry - safety aspects

International Nuclear Information System (INIS)

Kirthi, K.N.

1993-01-01

Electron beam accelerators are being used in increasing numbers in a variety of important applications. Commercial uses include radiography, food preservation, product sterilisation and radiation processing of materials. Since most of the industrial applications involve products, some that can be treated with electrons and others that require photons, electron accelerators serve this dual purpose economically. Although industrial accelerators are now regarded as standard products, finished installations show considerable diversity, reflecting the users, needs and planning. Because of the high radiation output, proper planning regarding safety is warranted. This paper discusses the hazards, safety and planning required during design and operation of the electron beam accelerators. (author). 4 refs., 1 fig

Grid-based Simulation of Industrial Thin Film Production

NARCIS (Netherlands)

Krzhizhanovskaya, V.V.; Sloot, P.M.A.; Gorbachev, Y.E.

2005-01-01

In this article, the authors introduce a Grid-based virtual reactor, a High Level Architecture (HLA)-supported problem-solving environment that allows for detailed numerical study of industrial thin-film production in plasma-enhanced chemical vapor deposition (PECVD) reactors. They briefly describe

Human Resources for Industrial Development. Some Aspects of Policy and Planning.

Science.gov (United States)

International Labour Office, Geneva (Switzerland).

This book analyzes some of the major manpower and social problems encountered by developing countries during industrialization. The first part of the book examines the skill requirements for industrial development in low-income countries, the aims and characteristics of industrial manpower training programs at the national level, the measures…

Application of Radiotracer Technology on Solving the Unsolved Leak in Lift Pit