WorldWideScience

Sample records for solar project description

  1. Waverly Homes, Inc. (lot 13) single family residence, Westminster, Colorado. Solar project description

    Science.gov (United States)

    1981-03-01

    The use of solar energy for space heating a single family home and preheating incoming city water is discussed. The system has an array of flat plate collectors with a gross area of 351 square feet. Air is used to deliver solar energy from the collector array to storage and to the space heating and hot water loads. Solar energy is stored in the basement in a 175 cubic foot concrete tin containing 17,500 pounds of rock. Solar energy preheated city water is stored in an 80 gallon preheat storage tank and supplied, to a conventional 40 gallon domestic hot water (DHW) tank. When solar energy is insufficient to satisfy the space heating load, a gas furnace provides auxiliary energy for space heating. Similarly, a gas heater in the DHW tank provides auxiliary energy for water heating.

  2. Solar project description for Summerwood Associates: Condominium residences (M); Old Saybrook, Connecticut

    Science.gov (United States)

    1981-09-01

    A solar energy system for a Connecticut rowhouse residence is described. The system is as active drain down system that consists of a 340 square foot water based flat plate collection array and a 600 gal. poured concrete insulated tank for heat storage. The solar energy system provides space heat and domestic hot water for the residence. The general characteristics of the residence and a site plan are given and the solar energy system is completely described, including the collector, storage, energy to load, and auxiliary subsystems. Specific details of the system's four operating modes are discussed. The performance evaluation instrumentation of the site for the National Solar Data Network is described, and the solar energy portion of the construction costs are given.

  3. Solar project description for Moulder Corporation single family residence, Greenwood, Indiana

    Science.gov (United States)

    1980-07-01

    The system is designed to provide solar energy for space heating and domestic hot water heating. Solar energy is used for space heating the home and preheating domestic hot water (DHW). The solar energy system has an array of flat plate collectors with a gross area of 704 square feet. The array faces 5.5 degrees west of south at an angle of 45 degrees to the horizontal. Air is the transfer medium that delivers solar energy from the collector array to storage, space heating and hot water loads. Solar energy is stored underground in 945 cubic foot bin containing 81,000 pounds of crushed rock. The bin has 8 inch concrete block walls and the insulation on the exterior is sprayed urethane. Preheated city water is stored in an 80 gallon preheat tank, which is inside the storage bin and is supplied, on demand, to a conventional 52 gallon DHW tank. When solar energy is insufficient to satisfy the space heating load, a conventional electric furnace provides the auxiliary energy for space heating.

  4. Solar renovation demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    Bruun Joergensen, O. [ed.

    1998-10-01

    In the framework of the IEA SHC Programme, a Task on building renovation was initiated, `Task 20, Solar Energy in Building Renovation`. In a part of the task, Subtask C `Design of Solar Renovation Projects`, different solar renovation demonstration projects were developed. The objective of Subtask C was to demonstrate the application of advanced solar renovation concepts on real buildings. This report documents 16 different solar renovation demonstration projects including the design processes of the projects. The projects include the renovation of houses, schools, laboratories, and factories. Several solar techniques were used: building integrated solar collectors, glazed balconies, ventilated solar walls, transparent insulation, second skin facades, daylight elements and photovoltaic systems. These techniques are used in several simple as well as more complex system designs. (au)

  5. Integrated Project Management System description. [UMTRAP Project

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office ( Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs.

  6. Winnebago Tribe Solar Project

    Energy Technology Data Exchange (ETDEWEB)

    Nieman, Autumn [Winnebago Tribe of Nebraska Solar Project (United States)

    2016-02-26

    The strategy of the Solar Project was to reduce fuel use within two years by a roof mounted photovoltaic system. The police/fire building is completely powered by electricity. The renewable energy system we have selected has a power capacity of 23kW and the ability to export 44.3 MWh. We anticipate 32.55% kWh energy savings, an excess of the required 30% reduction, in the building’s total fuel use based on the most current 12 months of data (2012). The solar electric system is a grid-tie, ballast mounted on a flat roof over the police/fire station. The solar electric system includes 280 Watt modules for a nominal total of 22.80 kW. Approximately 84 modules are ballast mounted to the flat roof facing south.

  7. Municipal Complex Solar Project

    Energy Technology Data Exchange (ETDEWEB)

    Sher, Jono [Dept. of Energy (DOE), Washington DC (United States); Toth, Andrew [City of Perth Amboy, NJ (United States)

    2015-02-12

    This project is a great benefit to the City of Perth Amboy by saving energy and savings costs. The project serves as a great example to city residents about the importance of renewable energy, energy conservation and other environmental topics. An electronic display in the City Hall shows how much energy was generated on that day, how much energy is saved, and environmental benefits. The project serves to educate people of environmental concerns and may spark the interest of individuals in other environmental topics. Hopefully, other residents will be encouraged to use solar energy. The project is also saving money for the City and its taxpayers. Anywhere we can save money means that residents can pay less in taxes and/or the City can provide improved services.

  8. Johnston Avenue Solar Project

    Energy Technology Data Exchange (ETDEWEB)

    Schrayer, David [Isles, Inc., Trenton, NJ (United States)

    2017-08-22

    DOE awarded funds to support a demonstration project to illustrate how access to solar power and green roof systems could improve building performance and long-term outcomes for the building owner and multiple nonprofit tenants housed in the building. Since being placed in service the solar PV system has saved approximately $1,000 per month in energy costs. The green roof has added to this benefit by naturally cooling the building and has helped reduce local road flooding by retaining storm water. These elements have improved the quality of life in the low-income community in which the building is located by allowing social service organizations to focus more of their resources on programs and job creation.

  9. High Luminosity LHC Project Description

    CERN Document Server

    Apollinari, Giorgio; Rossi, Lucio

    2014-01-01

    The High Luminosity LHC (HL-LHC) is a novel configuration of the Large Hadron Collider, aiming at increasing the luminosity by a factor five or more above the nominal LHC design, to allow increasing the integrated luminosity, in the high luminosity experiments ATLAS and CMS, from the 300 fb-1 of the LHC original design up to 3000 fb-1 or more. This paper contains a short description of the main machine parameters and of the main equipment that need to be developed and installed. The preliminary cost evaluation and the time plan are presented, too. Finally, the international collaboration that is supporting the project, the governance and the project structure are discussed, too.

  10. Solar heating and cooling. Research and development: project summaries

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    The Conservation and Solar Applications Solar Heating and Cooling Research and Development Program is described. The evolution of the R and D program is described and the present program is outlined. A series of project descriptions summarizes the research and development presently supported for further development of collectors, thermal energy storage and heat exchangers, heat pumps, solar cooling, controls, and systems. (MHR)

  11. Tucson Solar Village: Project management

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    The Tucson Solar Village is a Design/Build Project In Sustainable Community Development which responds to a broad spectrum of energy, environmental, and economic challenges. This project is designed for 820 acres of undeveloped State Trust Land within the Tucson city limits; residential population will be five to six thousand persons with internal employment provided for 1200. This is a 15 year project (for complete buildout and sales) with an estimated cost of $500 million. Details of the project are addressed with emphasis on the process and comments on its transferability.

  12. Collecting Solar Energy. Solar Energy Education Project.

    Science.gov (United States)

    O'Brien, Alexander

    This solar energy learning module for use with junior high school students offers a list of activities, a pre-post test, job titles, basic solar energy vocabulary, and diagrams of solar energy collectors and installations. The purpose is to familiarize students with applications of solar energy and titles of jobs where this knowledge could be…

  13. The Young Solar Analogs Project

    Science.gov (United States)

    Gray, Richard O.; Saken, J. M.; Corbally, C. J.; Seeds, M. F.; Morrison, S. S.

    2012-01-01

    We are carrying out a long-term project of measuring chromospheric activity and brightness variations in 31 young solar analogs (YSAs) using the Dark Sky Observatory (DSO -- Appalachian State University) 32-inch telescope and the G/M spectrograph. These YSAs are solar-type (spectral types F8 - K2) stars with ages ranging from 0.3 - 1.5 Gyr. The goal of this project is to gain better understanding of the magnetic activity of the early Sun, and especially how that activity may have impacted the development of life on the Earth. This project will also yield insights into the space environments experienced by young Earth analogs. We are currently in our 5th year of obtaining Ca II K & H chromospheric flux measurements, and are beginning to see signs of long-term activity cycles in a number of our stars. In addition, rotational modulation of the chromospheric fluxes is detectable in our data, and we have determined rotational periods for many of our stars. Short timescale increases in the K & H fluxes have been observed in a number of our stars; these events may be related to stellar flares. VATTSpec, a new moderate-resolution spectrograph on the 1.8-m Vatican Telescope in Arizona, has recently become involved with the project. This spectrograph will increase our ability to detect short-term changes in stellar activity on timescales of hours to minutes. We have been monitoring the program stars for one year in a multi-band photometric system consisting of Stromgren-v, and Johnson B, V, and R filters. We will soon add a narrow-band H-alpha filter to the system. Photometry is being carried out with a small piggy-back telescope on the 32-inch, but a robotic photometric telescope is currently being installed at DSO for this purpose. This project is supported by the National Science Foundation.

  14. Dispatchable Solar Power Plant Project

    Energy Technology Data Exchange (ETDEWEB)

    Price, Henry [Solar Dynamics LLC, Broomfield, CO (United States)

    2018-01-31

    As penetration of intermittent renewable power increases, grid operators must manage greater variability in the supply and demand on the grid. One result is that utilities are planning to build many new natural gas peaking power plants that provide added flexibility needed for grid management. This report discusses the development of a dispatchable solar power (DSP) plant that can be used in place of natural gas peakers. Specifically, a new molten-salt tower (MST) plant has been developed that is designed to allow much more flexible operation than typically considered in concentrating solar power plants. As a result, this plant can provide most of the capacity and ancillary benefits of a conventional natural gas peaker plant but without the carbon emissions. The DSP system presented was designed to meet the specific needs of the Arizona Public Service (APS) utility 2017 peaking capacity request for proposals (RFP). The goal of the effort was to design a MST peaker plant that had the operational capabilities required to meet the peaking requirements of the utility and be cost competitive with the natural gas alternative. The effort also addresses many perceived barriers facing the commercial deployment of MST technology in the US today. These include MST project development issues such as permitting, avian impacts, visual impacts of tower CSP projects, project schedule, and water consumption. The DSP plant design is based on considerable analyses using sophisticated solar system design tools and in-depth preliminary engineering design. The resulting DSP plant design uses a 250 MW steam power cycle, with solar field designed to fit on a square mile plot of land that has a design point thermal rating of 400 MWt. The DSP plant has an annual capacity factor of about 16% tailored to deliver greater than 90% capacity during the critical Arizona summer afternoon peak. The table below compares the All-In energy cost and capacity payment of conventional combustion turbines

  15. A Brief Description of My Projects

    Science.gov (United States)

    Barnes, Tobin

    2016-01-01

    My internship was in the IDC which consist of a machine shop and an array of design space. During my tour I worked on a wide variety of projects some of which included design, research, machining and fabrication. I gained further knowledge on some machines that I have had prior experience on such as the lathe and Hurco CNC machines. The first thing we did was complete our checkout in the machine shop which went pretty well, since I was already familiar with most of the machines. I also did a couple of practice parts on some of the machines, I made a name block on the CNC machine and I also used the vertical milling machine to complete this project. One of the other projects that I did was machine a hammer with my initials with the use of the lathe and CNC machine, this project took much longer since I had to set up a cylindrical piece on the CNC machine. The first project that I began work on was the Systems Engineering & Management Advancement Program (SEPMAP) Hexacopter project and helped them to assemble and modify one of their particle capture doors on their boxes. After a while we ended up helping them make a hinge and holes to reduce the weight of their design. We helped the NASA Extreme Environment Mission Operations (NEEMO) team a bit with some of their name tags and assembly of some of their underwater parts. One of the more challenging projects was a rail that came in with a rather weirdly drawn part. The biggest project that I worked on was the solar array project. Which consisted of a variety of machining and 3D printing and it took me about 3 different times of re-designing to come up with a final prototype. Along with this project I also had to complete a project in which I had to modify a thermos. This was rather simple since I just had to draw up a part and print it out on the 3D printer. I also learned how to use Pro E/Creo parametric to design a square block and print it on the 3D Printer. All of these projects increased my experience on all of

  16. Solar energy information and education project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hensley, M.

    1985-09-01

    The New Mexico Solar Energy Institute conducted a vigorous information and education program Fiscal Year 73. NNSEI conducted workshops, educational fiestas, and seminars. Media packets were distributed to all New Mexico media entities while NNSEI's radio programs were distributed to many stations. Many callers received valuable unbiased information from the SUN DIAL LINE, a tollfree energy information line. Teachers received the ''Solar Energy Educator'' newsletter. Computer assisted analysis of space heating needs, passive solar homes, and active solar hot water systems was performed by the Information and Educated project staff for builders, designers, and architects. This report summarizes NNSEI's Fiscal Year 73 Information and Education project activities. It includes detailed description of project costs and concise recommendations for similar programs.

  17. Solar heating and cooling demonstration project summaries

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    Brief descriptive overviews are presented of the design and operating characteristics of all commercial and Federal residential solar heating and cooling systems and of the structures themselves. Also included are available pictures of the buildings and simplified solar system diagrams. A list of non-Federal residential installations is provided.

  18. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. Curry

    2001-06-26

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  19. Mars Solar Balloon Lander Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Mars Solar Balloon Lander (MSBL) is a novel concept which utilizes the capability of solar-heated hot air balloons to perform soft landings of scientific...

  20. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. M. Curry

    2001-01-30

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  1. Ceramic corrosion/erosion project description

    Energy Technology Data Exchange (ETDEWEB)

    Nakaishi, C.V.; Carpenter, L.K.

    1981-02-01

    As a part of the United States Department of Energy's High Temperature Turbine Technology Program, the Morgantown Energy Technology Center is participating in a Ceramics Corrosion/Erosion Materials Study. Objective is to create a technology base for ceramic materials which could be used by stationary gas power turbines operating with a high-temperature, coal-derived, low-Btu gas products of combustion environment. Two facilities are designed and installed to burn a varying low-Btu coal-derived gas in a controlled manner. This report contains the objectives and testing philosophy as well as the operating, specimen handling, and emergency procedures for the facilities. The facilities were checked out in August/September 1980. Testing is scheduled to begin in late 1980 with completion of 1000 hours of ceramic materials exposure to be completed by early 1981. Most of the enclosed is an update of two METC Information Releases (IR), i.e., IR 442 (1979) Test Plan for Ceramic Corrosion/Erosion Project, and IR 817 (1980) Ceramic Corrosion/Erosion Project Description.

  2. Comprehensive Solar Sail Simulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar sails as a propulsive device have several potential applications: providing access to previously inaccessible orbits, longer mission times, and increased...

  3. Tierra Nueva -- A passive solar cohousing project

    Energy Technology Data Exchange (ETDEWEB)

    Haggard, K.; Cooper, P.

    1999-10-01

    California architects take on the formidable challenges of designing a cohousing project, and discover that the end result is well worth the effort. The Tierra Nueva Cohousing Project consists of living units, a common house, community orchard, community gardens, community play space, space for a future shop and at the periphery of the site, parking, carports and garages. The units use thermal mass, solar heating, passive solar cooling, perimeter insulation on slabs. Design was agreed to by the community as a whole.

  4. Concentrated Solar Air Conditioning for Buildings Project

    Science.gov (United States)

    McLaughlin, Rusty

    2010-01-01

    This slide presentation reviews project to implement the use of solar power to provide air conditioning for NASA buildings. Included is an overall conceptual schematic, and an diagram of the plumbing and instrumentation for the project. The use of solar power to power air conditioning in buildings, particularly in the Southwest, could save a significant amount of money. DOD studies have concluded that air conditioning accounts for 30-60% of total energy expenditures.

  5. Solar ENA Imaging Coronagraph Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Measurements of energetic neutral atoms (ENAs) are a new tool to improve our understanding of energy release and particle acceleration in solar eruptive events....

  6. Solmap: Project In India's Solar Resource Assessment

    Directory of Open Access Journals (Sweden)

    Indradip Mitra

    2014-12-01

    Full Text Available India launched Jawaharlal Nehru National Solar Mission in 2009, which aims to set up 20 000 MW of grid connected solar power, besides 2 000 MW equivalent of off-grid applications and cumulative growth of solar thermal collector area to 20 million m2 by 2022. Availability of reliable and accurate solar radiation data is crucial to achieve the targets. As a result of this initiative, Ministry of New and Renewable Energy (MNRE of Government of India (GoI has awarded a project to Centre for Wind Energy Technology (C-WET, Chennai in the year 2011 to set up 51 Solar Radiation Resource Assessment (SRRA stations using the state-of-the-art equipment in various parts of the country, especially the sites with high potential for solar power. The GoI project has synergy with SolMap project, which is implemented by the Deutsche GesellschaftfürInternationaleZusammenarbeit (GIZ in cooperation with the MNRE. SolMap project is contributing to SRRA project in establishing quality checks on the data obtained as per International protocols and helping data processing to generate investment grade data. The paper highlights the details of SRRA stations and an attempt has been made to present some of the important results of quality control and data analysis with respect to GHI and DNI. While our analysis of the data over one year finds that intensity and profile of the insolation are not uniform across the geographic regions, the variability in DNI is particularly high. Strong influence of monsoon is also identified. SRRA infrastructure aims to develop investment grade solar radiation resource information to assist project activities under the National Solar Mission of India.

  7. Description of the Fynbos Biome Project

    CSIR Research Space (South Africa)

    Kruger, FJ

    1978-06-01

    Full Text Available The objectives, organization and research programme of the Fynbos Biome Project being undertaken in the south-west and southern Cape are described. The project is a cooperative multi-disciplinary study of the ecological characteristics, structure...

  8. Fluid description of multi-component solar partially ionized plasma

    Energy Technology Data Exchange (ETDEWEB)

    Khomenko, E., E-mail: khomenko@iac.es; Collados, M.; Vitas, N. [Instituto de Astrofísica de Canarias, 38205 La Laguna, Tenerife (Spain); Departamento de Astrofísica, Universidad de La Laguna, 38205 La Laguna, Tenerife (Spain); Díaz, A. [Departament de Física, Universitat de les Illes Balears, E-07122 Palma de Mallorca (Spain)

    2014-09-15

    We derive self-consistent formalism for the description of multi-component partially ionized solar plasma, by means of the coupled equations for the charged and neutral components for an arbitrary number of chemical species, and the radiation field. All approximations and assumptions are carefully considered. Generalized Ohm's law is derived for the single-fluid and two-fluid formalism. Our approach is analytical with some order-of-magnitude support calculations. After general equations are developed, we particularize to some frequently considered cases as for the interaction of matter and radiation.

  9. INL Wind Farm Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Gary Siefert

    2009-07-01

    The INL Wind Farm project proposes to install a 20 MW to 40 MW wind farm on government property, consisting of approximately ten to twenty full-sized (80-meter hub height) towers with 2 MW turbines, and access roads. This includes identifying the optimal turbine locations, building access roads, and pouring the tower foundations in preparation for turbine installation. The project successfully identified a location on INL lands with commercially viable wind resources (i.e., greater than 11 mph sustained winds) for a 20 to 40 MW wind farm. Additionally, the proposed Wind Farm was evaluated against other General Plant Projects, General Purpose Capital Equipment projects, and Line Item Construction Projects at the INL to show the relative importance of the proposed Wind Farm project.

  10. Waste management project technical baseline description

    Energy Technology Data Exchange (ETDEWEB)

    Sederburg, J.P.

    1997-08-13

    A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project.

  11. Port of Galveston Solar Energy Project

    Energy Technology Data Exchange (ETDEWEB)

    Falcioni, Diane [Port of Galveston (POG), Galveston, TX (United States); Cuclis, Alex [Houston Advanced Research Center, The Woodlands, TX (United States); Freundlich, Alex [Univ. of Houston, Houston, TX (United States)

    2014-03-31

    This study on the performance characteristics of existing solar technologies in a maritime environment was funded by an award given to The Port of Galveston (POG) from the U.S. Department of Energy (DOE). The study includes research performed by The Center for Advanced Materials at the University of Houston (UH). The UH researchers examined how solar cell efficiencies and life spans can be improved by examining the performance of a variety of antireflective (AR) coatings mounted on the top of one of the POG’s Cruise Terminals. Supplemental supporting research was performed at the UH laboratories. An educational Kiosk was constructed with a 55” display screen providing information about solar energy, the research work UH performed at POG and real time data from the solar panels located on the roof of the Cruise Terminal. The Houston Advanced Research Center (HARC) managed the project.

  12. Description of the Karoo Biome project

    CSIR Research Space (South Africa)

    Cowling, RM

    1986-01-01

    Full Text Available availability. An analysis of existing research projects in relation to research fields and key questions indicates that studies are urgently required on the adaptive physiology, behaviour, and reproductive biology of selected species and growth forms...

  13. Description of the Grassland Biome Project

    CSIR Research Space (South Africa)

    Mentis, MT

    1982-10-01

    Full Text Available The objectives, organization and research programme of the Grassland Biome Project are described against a background of the biome's ecological characteristics and environmental problems. Four principal research topics wil 1 be focused upon: (i...

  14. Solar greenhouse training project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, L.; Kensil, D.; Lazar, B.; Yanda, B.; Yanda, S.

    1979-04-01

    The goals of this project were: (1) To train twenty teams, each from a different region, to organize and run workshops to build inexpensive, practical solar greenhouses. (2) To help create working solar greenhouse experts in the field available to respond to their community's needs. (3) To establish a national model program for solar greenhouse construction workshops. (4) To determine whether the barn-raising style used in the greenhouse construction workshops could be taught in the format of a 3 1/2 day seminar with a follow-up workshop. (5) To determine whether the audio-visual exhibit and printed materials used in the seminar were effective. (MOW)

  15. Projected shell model description for nuclear isomers

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y. [Department of Physics, Shanghai Jiao Tong University, Shanghai 200240, Popular Republic (China)

    2008-12-15

    The study of nuclear isomer properties is a current research focus. To describe isomers, we present a method based on the Projected Shell Model. Two kinds of isomers, {kappa}-isomers and shape isomers, are discussed. For the {kappa}-isomer treatment, {kappa}-mixing is properly implemented in the model. It is found however that in order to describe the strong {kappa}-violation more efficiently, it may be necessary to further introduce triaxiality into the shell model basis. To treat shape isomers, a scheme is outlined which allows mixing those configurations belonging to different shapes. (Author)

  16. The Voisey's Bay mine/mill project: project description report

    National Research Council Canada - National Science Library

    1996-01-01

    ...). The project referred to is the proposed development of a nickel-copper-cobalt mine and mill complex, including associated infrastructure, in the area of the Voisey's Bay discovery on the north coast of Labrador...

  17. Greenbelt Community Project: Solar energy retrofit for a multi-family dwelling

    Science.gov (United States)

    Hymowitz, E. W.; Hannemann, R. J.; Millman, L. L.; Pownell, J. E.

    1978-01-01

    A cooperative project was initiated between Goddard Space Flight Center and the nearby community of Greenbelt, Maryland. The purpose was to design, install and operate an experimental solar heating system on a group of four tandem town houses. The system was successfully developed and is operating. A description is given of the design, installation, system operation and performance as well as the important considerations for judging the economic feasibility of solar heating systems.

  18. Solar-thermal experimental projects on the Spanish Plataforma Solar

    Science.gov (United States)

    Grasse, W.

    1981-11-01

    The Plataforma Solar with an area of 1,000,000 sq m is located in Spain at a distance of approximately 50 km from the Mediterranean. In May 1979, nine members of the International Energy Agency (IEA) decided to support the construction of Small Solar Power Systems (SSPS). The countries involved include West Germany, the U.S., Spain, and Italy. The SSPS are to demonstrate the operational feasibility of solar technologies which have been mainly developed in Germany and the U.S. In addition, data are to be obtained regarding the relative competitive position of two different operational concepts for SSPS. The concepts are related to the central receiver system (solar tower) and the distributed collector system. Attention is also given to the Spanish solar power station CESA-1 and the German-Spanish technology program GAST, which is to explore the technological limits of solar-energy systems.

  19. Brownfields City of Houston Solar Project: Solar Power Analysis and Design Specifications

    Science.gov (United States)

    This document details the scope of work elements completed in support of this project, as well as recommendations for next steps towards solar project development and power purchase agreement negotiation and finalization.

  20. Nanostructured electrodes for Solar Power Generation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The key to achieving high-power solar arrays for NASA applications is the development of high-efficiency, thin-film solar cells that can be fabricated directly on...

  1. Modular Distributed Concentrator for Solar Furnace Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This research proposes to develop a lightweight approach to achieving the high concentrations of solar energy needed for a solar furnace achieving temperatures of...

  2. Fast Solar Sailing for Solar System Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Practical spinning solar sail architectures will be needed to meet low areal densities and large areas required for the most challenging science and exploration...

  3. Annual DOE active solar heating and cooling contractors' review meeting. Premeeting proceedings and project summaries

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1981-09-01

    Ninety-three project summaries are presented which discuss the following aspects of active solar heating and cooling: Rankine solar cooling systems; absorption solar cooling systems; desiccant solar cooling systems; solar heat pump systems; solar hot water systems; special projects (such as the National Solar Data Network, hybrid solar thermal/photovoltaic applications, and heat transfer and water migration in soils); administrative/management support; and solar collector, storage, controls, analysis, and materials technology. (LEW)

  4. Solar Wind Earth Exchange Project (SWEEP)

    Science.gov (United States)

    2016-10-28

    highly charged ions of the solar wind. The main challenge in predicting the resultant photon flux in the X-ray energy bands is due to the...Newton, an X-ray astronomical observatory. We use OMNI solar wind conditions, heavy ion composition data from ACE, the Hodges neutral hydrogen model...of SWEEP was to compare theoretical models of X-ray emission in the terrestrial magnetosphere caused by the Solar Wind Charge Exchange

  5. Space Object and Light Attribute Rendering (SOLAR) Projection System

    Science.gov (United States)

    2017-05-08

    style emulation system called the Space Object and Light Attribute Rendering (SOLAR) Projection System. On- orbit dy- namics and control with sensor...Figure 3: SOLAR system installation process Figure 4: Images of the SOLAR system daytime simulator. Stars, planets and satellites are shown with the...generation orbit determination systems for RSO tracking and characterization. Mr. Moyer has developed excellent working relationship with his Air

  6. Urban Options Solar Greenhouse Demonstration Project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cipparone, L.

    1980-10-15

    The following are included: the design process, construction, thermal performance, horticulture, educational activities, and future plans. Included in appendices are: greenhouse blueprints, insulating curtain details, workshop schedules, sample data forms, summary of performance calculations on the Urban Options Solar Greenhouse, data on vegetable production, publications, news articles on th Solar Greenhouse Project, and the financial statement. (MHR)

  7. Solar Cooker Project of ADES | Vetter | Madagascar Conservation ...

    African Journals Online (AJOL)

    The article describes the contribution of the ADES (Association pour le Développement de l'Énergie Solaire Suisse - Madagascar) Solar Cooker Project in the south of Madagascar: fighting the ongoing deforestation, preserving the environment and fighting poverty. It explains advantages and disadvantages of solar cooking ...

  8. Solar-heating and cooling demonstration project

    Science.gov (United States)

    1980-01-01

    Florida Solar Energy Center has retrofitted office building, approximately 5,000 square feet of area, with solar heating and air-conditioning. Information on operation, installation, controls, and hardware for system is contained in 164 page report. Document includes manufacturer's product literature and detailed drawings.

  9. Solar Energy and Reference Skills. Solar Energy Education Project.

    Science.gov (United States)

    Conover, Marie Ann

    This language arts learning module offers a structure to teachers for leading junior high school class activities to investigate solar energy, its origin, and effect. The module furnishes a pre-post test, a schedule for library and research work, a basic vocabulary list, and a bibliography. (CP)

  10. Solar Radiation Resource Assessment Project. Program overview of fiscal year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    The mission of the Solar Radiation Resource Assessment Project is to provide essential information about the solar radiation resource to users and planners of solar technologies so that they can make informed and timely decisions concerning applications of those technologies. The project team accomplishes this by producing and disseminating relevant and reliable information about solar radiation. Topics include: Variability of solar radiation, measurements of solar radiation, spectral distribution of solar radiation, and assessment of the solar resource. FY 1993 accomplishments are detailed.

  11. Environmental testing of Block II solar cell modules. Low-Cost Solar Array Project

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, J.S.

    1979-01-01

    The results of environmental tests of Block II solar modules are described. Block II was the second large scale procurement of silicon solar cell modules made by the JPL Low-Cost Solar Array Project with deliveries in 1977 and early 1978. The results of testing showed that the Block II modules were greatly improved over Block I modules. In several cases it was shown that design improvements were needed to reduce environmental test degradation. These improvements were incorporated during this production run.

  12. Lunar Surface Solar Electric Power System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a concentrated photovoltaic electric power system for lunar operations called C-Lite Lunar. The novel technology produces a near-term solar array system...

  13. Thin Flexible IMM Solar Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Thin, flexible, and highly efficient solar arrays are needed that package compactly for launch and deploy into large, structurally stable high power generators....

  14. High Efficiency Solar Furnace Core Project

    Data.gov (United States)

    National Aeronautics and Space Administration — It is proposed to develop a high efficiency solar furnace core that greatly lessens the heat losses from the furnace core, either greatly reducing the amount of...

  15. Multijunction Ultralight Solar Cells and Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is a continuing need within NASA for solar cells and arrays with very high specific power densities (1000-5000 kW/kg) for generating power in a new generation...

  16. High Efficiency, Deployable Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Ultrathin, lightweight, flexible, and easily deployable solar cell (SC) capable of specific power greater than 1kW/kg are at an early stage of development for...

  17. Solar Panel and Induction Lighting Project

    Energy Technology Data Exchange (ETDEWEB)

    Gresek, Michael [City of Tamarac, FL (United States)

    2014-01-21

    Installation of solar and energy saving lighting technologies at municipal facilities to: Produce and conserve electricity for these facilities; saving money and the environment; lead by example; educate the public on conservation and renewable technologies.

  18. Thin Flexible IMM Solar Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Inverted Metamorphic (IMM) solar cells have achieved high efficiency at very low mass, but integration of the thin crystalline photovoltaic device into a flexible...

  19. Modular Distributed Concentrator for Solar Furnace Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This research proposes to develop the technology needed to implement a solar-fired regolith processing system at a lunar outpost that achieves low mass, high...

  20. Industrial solar breeder project using concentrator photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, R; Wohlgemuth, J; Burkholder, J; Levine, A; Storti, G; Wrigley, C; McKegg, A

    1979-08-01

    The purpose of this program is to demonstrate the use of a concentrating photovoltaic system to provide the energy for operating a silicon solar cell production facility, i.e., to demonstrate a solar breeder. Solarex has proposed to conduct the first real test of the solar breeder concept by building and operating a 200 kW(e) (peak) concentrating photovoltaic system based on the prototype and system design developed during Phase I. This system will provide all of the electrical and thermal energy required to operate a solar cell production line. This demonstration would be conducted at the Solarex Rockville facility, with the photovoltaic array located over the company parking lot and on an otherwise unusable flood plain. Phase I of this program included a comprehensive analysis of the application, prototype fabrication and evaluation, system design and specification, and a detailed plan for Phases II and III. A number of prototype tracking concentrator solar collectors were constructed and operated. Extensive system analysis was performed to design the Phase II system as a stand-alone power supply for a solar cell production line. Finally, a detailed system fabrication proposal for Phase II and an operation and evaluation plan for Phase III were completed. These proposals included technical, management, and cost plans for the fabrication and exercise of the proposed system.

  1. 1980 survey and evaluation of utility conservation, load management, and solar end-use projects. Volume 3: utility load management projects. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The results of the 1980 survey of electric utility-sponsored energy conservation, load management, and end-use solar energy conversion projects are described. The work is an expansion of a previous survey and evaluation and has been jointly sponsored by EPRI and DOE through the Oak Ridge National Laboratory. There are three volumes and a summary document. Each volume presents the results of an extensive survey to determine electric utility involvement in customer-side projects related to the particular technology (i.e., conservation, solar, or load management), selected descriptions of utility projects and results, and first-level technical and economic evaluations.

  2. Geospatial Optimization of Siting Large-Scale Solar Projects

    Energy Technology Data Exchange (ETDEWEB)

    Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Quinby, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Caulfield, Emmet [Stanford Univ., CA (United States); Gerritsen, Margot [Stanford Univ., CA (United States); Diffendorfer, Jay [U.S. Geological Survey, Boulder, CO (United States); Haines, Seth [U.S. Geological Survey, Boulder, CO (United States)

    2014-03-01

    Recent policy and economic conditions have encouraged a renewed interest in developing large-scale solar projects in the U.S. Southwest. However, siting large-scale solar projects is complex. In addition to the quality of the solar resource, solar developers must take into consideration many environmental, social, and economic factors when evaluating a potential site. This report describes a proof-of-concept, Web-based Geographical Information Systems (GIS) tool that evaluates multiple user-defined criteria in an optimization algorithm to inform discussions and decisions regarding the locations of utility-scale solar projects. Existing siting recommendations for large-scale solar projects from governmental and non-governmental organizations are not consistent with each other, are often not transparent in methods, and do not take into consideration the differing priorities of stakeholders. The siting assistance GIS tool we have developed improves upon the existing siting guidelines by being user-driven, transparent, interactive, capable of incorporating multiple criteria, and flexible. This work provides the foundation for a dynamic siting assistance tool that can greatly facilitate siting decisions among multiple stakeholders.

  3. Solar energy system performance evaluation - final report for Honeywell OTS 45, Salt River Project, Phoenix, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Mathur, A K

    1983-09-01

    This report describes the operation and technical performance of the Solar Operational Test Site (OTS 45) at Salt River Project in Phoenix, Arizona, based on the analysis of data collected between April 1981 and March 31, 1982. The following topics are discussed: system description, performance assessment, operating energy, energy savings, system maintenance, and conclusions. The solar energy system at OTS 45 is a hydronic heating and cooling system consisting of 8208 square feet of liquid-cooled flat-plate collectors; a 2500-gallon thermal storage tank; two 25-ton capacity organic Rankine-cycle-engine-assisted water chillers; a forced-draft cooling tower; and associated piping, pumps, valves, controls and heat rejection equipment. The solar system has eight basic modes of operation and several combination modes. The system operation is controlled automatically by a Honeywell-designed microprocessor-based control system, which also provides diagnostics. Based on the instrumented test data monitored and collected during the 8 months of the Operational Test Period, the solar system collected 1143 MMBtu of thermal energy of the total incident solar energy of 3440 MMBtu and provided 241 MMBtu for cooling and 64 MMBtu for heating. The projected net annual electrical energy savings due to the solar system was approximately 40,000 kWh(e).

  4. Virginia Solar Pathways Project: Economic Study of Utility-Administered Solar Programs: Soft Costs, Community Solar, and Tax Normalization Considerations

    Energy Technology Data Exchange (ETDEWEB)

    Reiter, Emerson [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lowder, Travis [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mathur, Shivani [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mercer, Megan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-23

    This report presents economic considerations for solar development in support of the Virginia Solar Pathways Project (VSPP), an effort funded by the U.S. Department of Energy (DOE) SunShot Initiative that seeks to develop a collaborative utility-administered solar strategy for the Commonwealth of Virginia. The results presented are intended to be considered alongside the results of other studies conducted under the VSPP that evaluate the impacts of solar energy on the electric distribution, transmission, and generation systems in Virginia.

  5. Heritage plaza parking lots improvement project- Solar PV installation

    Energy Technology Data Exchange (ETDEWEB)

    Hooks, Todd [Agua Caliente Indian Reservation, Palm Springs, CA (United States)

    2017-03-31

    The Agua Caliente Band of Cahuilla Indians (ACBCI or the “Tribe”) installed a 79.95 kW solar photovoltaic (PV) system to offset the energy usage costs of the Tribal Education and Family Services offices located at the Tribe's Heritage Plaza office building, 90I Tahquitz Way, Palm Springs, CA, 92262 (the "Project"). The installation of the Solar PV system was part of the larger Heritage Plaza Parking Lot Improvements Project and mounted on the two southern carport shade structures. The solar PV system will offset 99% of the approximately 115,000 kWh in electricity delivered annually by Southern California Edison (SCE) to the Tribal Education and Family Services offices at Heritage Plaza, reducing their annual energy costs from approximately $22,000 annually to approximately $200. The total cost of the proposed solar PV system is $240,000.

  6. West Chester Work Center: solar space heating demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    This document reports on the construction stage of a solar space heating demonstration project. It describes an integrated system providing solar energy space heating for a 9982 sq. ft., newly built, one-story building. The building is located at 966 Matlack Street, West Goshen Township, Chester County, Pennsylvania. Functionally, the building consists of two sections: An Office and a Storeroom. The Office section is heated by solar-assisted water-to-air heat pump units. The Storeroom section is heated by an air-handling unit, containing a water-to-air coil. Solar energy is expected to provide 62% of the heating load, with the balance provided by a back-up electric boiler. The system includes 1900 active (2112 gross) square feet of flat-plate solar collectors, and a 6000 gallon above-ground indoor storage tank. Freeze protection is provided by a gravity drain-down scheme combined with nitrogen pressurization in a closed circuit.

  7. Explore the solar system! 25 great projects, activities, experiments

    CERN Document Server

    Yasuda, Anita

    2009-01-01

    Explore the Solar System! 25 Great Projects, Activities, Experiments introduces kids ages 6-9 to the planets, moons, and other celestial bodies that surround our star, the sun, as well as the universe beyond. Combining a hands-on element with history and science, kids investigate solar eclipses, phases of the moon, Jupiter's rings, and what astronauts wear. Who named the stars? What is the Milky Way? Why is there night? By combining a hands-on element with riddles, jokes, fun facts, and comic cartoons, kids Explore the Solar System!, and have a blast along the way.

  8. Coolidge solar powered irrigation pumping project

    Science.gov (United States)

    Larson, D. L.

    1980-01-01

    A 150 kW solar thermal electric power plant which includes over 2100 square meters of parabolic trough type collectors and an organic Rankine cycle turbine engine was constructed on an irrigated farm. The plant is interconnected with the electrical utility grid. Operation is providing an evaluation of equipment performance and operating and maintenance requirements as well as the desirability of an on farm location.

  9. Solar energy parking canopy demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Cylwik, Joe [City of Big Bear Lake, Big Bear, CA (United States); David, Lawrence [City of Big Bear Lake, Big Bear, CA (United States)

    2015-09-24

    The goal of this pilot/demonstration program is to measure the viability of using solar photovoltaic (PV) technology at three locations in a mountain community environment given the harsh weather conditions. An additional goal is to reduce long-term operational costs, minimize green house gas emissions, lower the dependency on energy produced from fossil fuels, and improve the working environment and health of city employees and residents.

  10. The Solar Impulse solar-aeroplane project; Solarflugzeug-Projekt Solar Impulse: die Herausforderung und ihre Loesungen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This short article describes the Solar Impulse project which envisages a round-the-world flight with a purely solar-powered aeroplane. The article lists the aims and milestones of the project and takes a look at the financing of the 22 million Swiss francs needed for the project. The aeroplane, on which a feasibility study was made at the Swiss Federal Institute of Technology in Lausanne, Switzerland, is being sponsored by various companies and an electricity utility. The first test flights are to be made in 2008. Technical details, including power storage for night-flights, and the light-weight wing construction are briefly discussed.

  11. Solar Access to Public Capital (SAPC) Mock Securitization Project

    Energy Technology Data Exchange (ETDEWEB)

    Mendelsohn, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lowder, Travis [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rottman, Mary [Rottman-Associates, San Francisco, CA (United States); Borod, Ronald [DLA Piper, London (United Kingdom); Gabig, Nathan [KPMG, Knoxville, TN (United States); Henne, Stephen [KPMG, Knoxville, TN (United States); Caplin, Conrad [KPMG, Knoxville, TN (United States); Notte, Quentin [Mercatus, Arlington, VA (United States)

    2015-12-21

    In late 2012, the National Renewable Energy Laboratory (NREL) initiated the Solar Access to Public Capital (SAPC) working group. Backed by a three-year funding facility from the U.S. Department of Energy (DOE), NREL set out to organize the solar, legal, banking, capital markets, engineering, and other relevant stakeholder communities in order to open lower-cost debt investment for solar asset deployment. SAPC engaged its members to standardize contracts, develop best practices, and comprehend how the rating agencies perceive solar project portfolios as an investment asset class. Rating agencies opine on the future creditworthiness of debt obligations. Issuers often seek investment-grade ratings from the rating agencies in order to satisfy the desires of their investors. Therefore, for the solar industry to access larger pools of capital at a favorable cost, it is critical to increase market participants' understanding of solar risk parameters. The process provided valuable information to address rating agency perceptions of risk that, without such information, could require costly credit enhancement or higher yields to attract institutional investors. Two different securities were developed--one for a hypothetical residential solar portfolio and one for a hypothetical commercial solar portfolio. Five rating agencies (Standard and Poor's, Moody's, KBRA, Fitch, and DBRS) participated and provided extensive feedback, some through conversations that extended several months. The findings represented in this report are a composite summary of that feedback and do not indicate any specific feedback from any single rating agency.

  12. The cost of solar refrigeration: The rococo project; Was solare Kuehlung kostet - das Rococo-Projekt

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, J.P.

    2008-01-21

    The cost of modern solar refrigerators is between 1,300 and 8,000 Euros per kW of refrigeration capacity. The biggest potential for savings is in the peripheral components, as well as in the operating cost and especially in servicing. Cost reduction must have priority if solar refrigeration is to be successful in the market. In the context of the European research project ''Reduction of costs of Solar Cooling systems'' (Rococo), a team of scientists from France, Spain and Austria investigated existing systems. (orig.)

  13. A technical description of the FlexHouse Project Testbed

    DEFF Research Database (Denmark)

    Sørensen, Jens Otto

    2000-01-01

    This paper describes the FlexHouse project testbed; a server dedicated to experiments within the FlexHouse project. The FlexHouse project is a project originating from The Business Computing Research Group at The Aarhus School of Business. The purpose of the project is to identify and develop...... methods that satisfy the following three requirements. Flexibility with respect to evolving data sources. Flexibility with respect to change of information needs. Efficiency with respect to view management....

  14. A simple mathematical description of an off-grid hybrid solar-wind power generating system

    Science.gov (United States)

    Blasone, M.; Dell'Anno, F.; De Luca, R.; Torre, G.

    2013-05-01

    We give a detailed description of the energy balance equation for a stand-alone hybrid solar-wind power generating system. The dimensions of the power generator and the energy capacity of a buffer battery (used as an energy storage system) are chosen to suit a known consumer's profile. Future applications of the mathematical model developed and analogies with a similar hydrodynamic problem are discussed.

  15. Research notes : solar powered navigational lighting system demonstration project.

    Science.gov (United States)

    2011-04-01

    ODOT will be installing a solar powered navigational lighting system on the AstoriaMegler Bridge as part of a pilot project approved by the Federal Highways Administration (FHWA). The coastal bridge is the connection across the Columbia River on U.S....

  16. Solar Hydrogen Fuel Cell Projects at Brooklyn Tech

    Science.gov (United States)

    Fedotov, Alex; Farah, Shadia; Farley, Daithi; Ghani, Naureen; Kuo, Emmy; Aponte, Cecielo; Abrescia, Leo; Kwan, Laiyee; Khan, Ussamah; Khizner, Felix; Yam, Anthony; Sakeeb, Khan; Grey, Daniel; Anika, Zarin; Issa, Fouad; Boussayoud, Chayama; Abdeldayem, Mahmoud; Zhang, Alvin; Chen, Kelin; Chan, Kameron Chuen; Roytman, Viktor; Yee, Michael

    2010-01-01

    This article describes the projects on solar hydrogen powered vehicles using water as fuel conducted by teams at Brooklyn Technical High School. Their investigations into the pure and applied chemical thermodynamics of hydrogen fuel cells and bio-inspired devices have been consolidated in a new and emerging sub-discipline that they define as solar…

  17. Opening up the solar box: Cultural resource management and actor network theory in solar energy projects in the Mojave Desert

    Science.gov (United States)

    Gorrie, Bryan F.

    This project considers the ways that Actor-Network Theory (ANT) can be brought to bear upon Cultural Resource Management (CRM) practices on renewable energy projects. ANT is a way of making inquiry into scientific knowledge practices and as CRM is intended to preserve environmental, historic, and prehistoric resources, it necessarily involves certain kinds of knowledge generation about regions in which projects are being developed. Because the practice of CRM is complex, involving a range of actors from developers to biologists, native peoples to academics, private landholders to environmental and cultural activists, it is imperative to account for the interests of all stakeholders and to resist devolving into the polemical relations of winners and losers, good and bad participants, or simple situations of right and wrong. This project intends to account for the "matters of concern" of various actors, both primary and secondary, by examining the case study of a single solar installation project in the Mojave Desert. A theoretical description of ANT is provided at the beginning and the concerns of this theory are brought to bear upon the case study project through describing the project, discussing the laws governing CRM on federal lands and in the state of California, and providing the points of view of various interviewees who worked directly or indirectly on various aspects of CRM for the solar project. The creators of ANT claim that it is not a methodology but it does speak to ethnomethodologies in that it insists that there is always something more to learn from inquiring into and describing any given situation. These descriptions avoid generalizations, providing instead various points of entry, from diverse perspectives to the project. There is an invitation to avoid assuming that one knows all there is to know about a given situation and to choose instead to continue investigating and thus give voice to the more obscure, often marginalized, voices in the

  18. Total and Spectral Solar Irradiance Sensor (TSIS) Project Overview

    Science.gov (United States)

    Carlisle, Candace; Wedge, Ronnice; Wu, Dong; Stello, Harry; Robinson, Renee

    2015-01-01

    The main objective of the Total and Spectral solar Irradiance Sensor (TSIS) is to acquire measurements to determine the direct and indirect effects of solar radiation on climate. TSIS total solar irradiance measurements will extend a 37-year long uninterrupted measurement record of incoming solar radiation, the dominant energy source driving the Earths climate and the most precise indicator of changes in the Suns energy output. TSIS solar spectral irradiance measurements will determine the regions of the Earths multi-layered atmosphere that are affected by solar variability, from which the solar forcing mechanisms causing changes in climate can be quantified. TSIS includes two instruments: the Total Irradiance Monitor (TIM) and the Spectral Irradiance Monitor (SIM), integrated into a single payload. The TSIS TIM and SIM instruments are upgraded versions of the two instruments that are flying on the Solar Radiation and Climate Experiment (SORCE) mission launched in January 2003. TSIS was originally planned for the nadir-pointing National Polar-orbiting Operational Environmental Satellite System (NPOESS) spacecraft. The TSIS instrument passed a Critical Design Review (CDR) for NPOESS in December 2009. In 2010, TSIS was re-planned for the Joint Polar Satellite System (JPSS) Polar Free Flyer (PFF). The TSIS TIM, SIM, and associated electronics were built, tested, and successfully completed pre-ship review as of December 2013.In early 2014, NOAA and NASA agreed to fly TSIS on the International Space Station (ISS). In the FY16 Presidents Budget, NASA assumes responsibility for the TSIS mission on ISS. The TSIS project includes requirements, interface, design, build and test of the TSIS payload, including an updated pointing system, for accommodation on the ISS. It takes advantage of the prior development of the TSIS sensors and electronics. The International Space Station (ISS) program contributions include launch services and robotic installation of the TSIS payload

  19. Texas Solar Collaboration DOE Rooftop Solar Challenge City of Houston Project Summary

    Energy Technology Data Exchange (ETDEWEB)

    Ronk, Jennifer [Houston Advanced Research Center, TX (United States)

    2013-02-14

    The City of Houston is committed to achieving a sustainable solar infrastructure. In 2008, Houston was named a United States Department of Energy (DOE) Solar America City. As a Solar America City, Houston teamed with the Houston Advanced Research Center (HARC), Sandia National Laboratory (Sandia), industry, and academia, to implement the Solar Houston Initiative and prepare the Solar Houston Plan. The Solar Houston initiative was focused on identifying and overcoming barriers associated with establishing a solar infrastructure that is incorporated into the City of Houston’s overall energy plan. A broad group of Houston area stakeholders, facilitated by HARC, came together to develop a comprehensive solar plan that went beyond technology to address barriers and establish demonstrations, public outreach, education programs and other activities. The plan included proposed scopes of work in four program areas: policies, solar integration, public outreach, and education. Through the support of the DOE SunShot Rooftop Solar Challenge (RSC) grant to the Texas Collaboration (San Antonio, Austin, and Hosuton), Houston has been able to implement several of the recommendations of the Solar Houston Plan. Specific recommendations that this project was able to support include; Working with the other Texas Solar America Cities (San Antonio and Austin), to harmonize permitting and inspection processes to simplify for installers and lower soft costs of installation; Participating in state level solar policy groups such as the Texas Renewable Energy Industries Association (TRIEA); Continued coordination with the local transmission and distribution utility (CenterPoint) and retail electric providers (REP); Identification of opportunities to improve permitting and interconnection; Providing training on PV systems to City inspectors; Educating the public by continuing outreach, training, and workshops, particularly using the the Green Building Resources Center; Evaluating methods of

  20. Development of Local Supply Chain : The Missing Link for Concentrated Solar Power Projects in India

    OpenAIRE

    World Bank

    2013-01-01

    Amid the success of Solar Photovoltaic (PV) projects in India, Concentrated Solar Power (CSP) technology also provides a compelling case for support by the government as among solar technologies; CSP is the only techno-economically viable option at present that provides a storage option for dispatchable and dependable solar energy. Furthermore, the conversion of solar to steam is a relativ...

  1. Solar eruptive filament studies at USO for the COMESEP project

    Science.gov (United States)

    Srivastava, N.; Crosby, N.; Veronig, A.; Robrrecht, E.; Vršnak, B.; Vennerstrom, S.; Malandraki, O.; Dalla, S.; Rodriguez, L.; Hesse, M.; Odstrcil, D.

    The Coronal Mass Ejections and Solar Energetic Particles (COMESEP) project is developing tools for forecasting geomagnetic storms and solar energetic particle (SEP) radiation storms. By analysis of historical solar and interplanetary data, complemented with the extensive data coverage of solar cycle 23, the key ingredients that lead to geomagnetic storms, SEP events and the factors that are responsible for false alarms are being identified. Based on the insights gained, and making use of algorithms for the automated detection of CMEs, forecasting tools for geomagnetic and SEP radiation storms will be developed and optimised. Validation and implementation of the developed tools into an operational Space Weather Alert system will be performed. COMESEP is a unique cross collaboration effort and bridges the gap between the SEP, CME and terrestrial effects scientific communities. The role of the Udaipur Solar Observatory (USO) in addressing some of the goals of this project are highlighted in this paper. In particular, USO is engaged in studying the CMEs associated with eruptive filaments. We describe the studies undertaken to understand space weather effects related to these CMEs.

  2. Bankability and Debt Financing for Solar Projects in India

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-02-15

    This report looks at debt financing for solar projects in India from two perspectives: the lender’s point of view and the borrower’s point of view. The lender’s point of view addresses the bankability of solar projects in India by covering all the risks and their respective mitigation strategies. The goal is to help the developer’s understand the steps they need to take to increase their chances of receiving non-recourse financing. From the borrower’s point of view the report covers how the project finances can be structured in an optimum manner. Details are covered on how bridge financing can be used to solve liquidity issues. Also, various sources of financing have been discussed in detail.

  3. Flat Plate Solar Array Project: Proceedings of the 20th Project Integration Meeting

    Science.gov (United States)

    Mcdonald, R. R.

    1982-01-01

    Progress made by the Flat-Plate Solar Array Project during the period November 1981 to April 1982 is reported. Project analysis and integration, technology research in silicon material, large-area silicon sheet and environmental isolation, cell and module formation, engineering sciences, and module performance and failure analysis are covered.

  4. Semiconductor grade, solar silicon purification project

    Science.gov (United States)

    Ingle, W. M.; Rosler, R. R.; Thompson, S. W.; Chaney, R. E.

    1979-01-01

    Experimental apparatus and procedures used in the development of a 3-step SiF2(x) polymer transport purification process are described. Both S.S.M.S. and E.S. analysis demonstrated that major purification had occured and some samples were indistinguishable from semiconductor grade silicon (except possibly for phosphorus). Recent electrical analysis via crystal growth reveals that the product contains compensated phosphorus and boron. The low projected product cost and short energy payback time suggest that the economics of this process will result in a cost less than the goal of $10/Kg(1975 dollars). The process appears to be readily scalable to a major silicon purification facility.

  5. Agua Caliente Wind/Solar Project at Whitewater Ranch

    Energy Technology Data Exchange (ETDEWEB)

    Hooks, Todd [Agua Caliente Band of Cahuilla Indians, Palm Springs, CA (United States); Stewart, Royce [Red Mountain Energy Partners, Sante Fe, NM (United States)

    2014-12-16

    Agua Caliente Band of Cahuilla Indians (ACBCI) was awarded a grant by the Department of Energy (DOE) to study the feasibility of a wind and/or solar renewable energy project at the Whitewater Ranch (WWR) property of ACBCI. Red Mountain Energy Partners (RMEP) was engaged to conduct the study. The ACBCI tribal lands in the Coachella Valley have very rich renewable energy resources. The tribe has undertaken several studies to more fully understand the options available to them if they were to move forward with one or more renewable energy projects. With respect to the resources, the WWR property clearly has excellent wind and solar resources. The DOE National Renewable Energy Laboratory (NREL) has continued to upgrade and refine their library of resource maps. The newer, more precise maps quantify the resources as among the best in the world. The wind and solar technology available for deployment is also being improved. Both are reducing their costs to the point of being at or below the costs of fossil fuels. Technologies for energy storage and microgrids are also improving quickly and present additional ways to increase the wind and/or solar energy retained for later use with the network management flexibility to provide power to the appropriate locations when needed. As a result, renewable resources continue to gain more market share. The transitioning to renewables as the major resources for power will take some time as the conversion is complex and can have negative impacts if not managed well. While the economics for wind and solar systems continue to improve, the robustness of the WWR site was validated by the repeated queries of developers to place wind and/or solar there. The robust resources and improving technologies portends toward WWR land as a renewable energy site. The business case, however, is not so clear, especially when the potential investment portfolio for ACBCI has several very beneficial and profitable alternatives.

  6. Solar Electric Propulsion System Integration Technology (SEPSIT). Volume 2: Encke rendezvous mission and space vehicle functional description

    Science.gov (United States)

    Gardner, J. A.

    1972-01-01

    A solar electric propulsion system integration technology study is discussed. Detailed analyses in support of the solar electric propulsion module were performed. The thrust subsystem functional description is presented. The space vehicle and the space mission to which the propulsion system is applied are analyzed.

  7. Enabling Solar Flare Forecasting at an Unprecedented Level: the FLARECAST Project

    Science.gov (United States)

    Georgoulis, Manolis K.; Pariat, Etienne; Massone, Anna Maria; Vilmer, Nicole; Jackson, David; Buchlin, Eric; Csillaghy, Andre; Bommier, Veronique; Kontogiannis, Ioannis; Gallagher, Peter; Gontikakis, Costis; Guennou, Chloé; Murray, Sophie; Bloomfield, D. Shaun; Alingery, Pablo; Baudin, Frederic; Benvenuto, Federico; Bruggisser, Florian; Florios, Konstantinos; Guerra, Jordan; Park, Sung-Hong; Perasso, Annalisa; Piana, Michele; Sathiapal, Hanna; Soldati, Marco; Von Stachelski, Samuel; Argoudelis, Vangelis; Caminade, Stephane

    2016-07-01

    We attempt a brief but informative description of the Flare Likelihood And Region Eruption Forecasting (FLARECAST) project, European Commission's first large-scale investment to explore the limits of reliability and accuracy for the forecasting of major solar flares. The consortium, objectives, and first results of the project - featuring an openly accessible, interactive flare forecasting facility by the end of 2017 - will be outlined. In addition, we will refer to the so-called "explorative research" element of project, aiming to connect solar flares with coronal mass ejections (CMEs) and possibly pave the way for CME, or eruptive flare, prediction. We will also emphasize the FLARECAST modus operandi, namely the diversity of expertise within the consortium that independently aims to science, infrastructure development and dissemination, both to stakeholders and to the general public. Concluding, we will underline that the FLARECAST project responds squarely to the joint COSPAR - ILWS Global Roadmap to shield society from the adversities of space weather, addressing its primary goal and, in particular, its Research Recommendations 1, 2 and 4, Teaming Recommendations II and III, and Collaboration Recommendations A, B, and D. The FLARECAST project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 640216.

  8. 76 FR 54454 - Issuance of Loan Guarantee to Genesis Solar, LLC, for the Genesis Solar Energy Project

    Science.gov (United States)

    2011-09-01

    ... Genesis Solar, LLC, for construction and startup of the Genesis Solar Energy Project (GSEP), a 250... to support the financing of the GSEP. NEPA Review BLM was the lead Federal agency in the preparation... Genesis Solar, LLC for $800 million to support construction and startup of the GSEP. Accordingly, the DOE...

  9. Mir Cooperative Solar Array Project Accelerated Life Thermal Cycling Test

    Science.gov (United States)

    Hoffman, David J.; Scheiman, David A.

    1996-01-01

    The Mir Cooperative Solar Array (MCSA) project was a joint U.S./Russian effort to build a photovoltaic (PV) solar array and deliver it to the Russian space station Mir. The MCSA will be used to increase the electrical power on Mir and provide PV array performance data in support of Phase 1 of the International Space Station. The MCSA was brought to Mir by space shuttle Atlantis in November 1995. This report describes an accelerated thermal life cycle test which was performed on two samples of the MCSA. In eight months time, two MCSA solar array 'mini' panel test articles were simultaneously put through 24,000 thermal cycles. There was no significant degradation in the structural integrity of the test articles and no electrical degradation, not including one cell damaged early and removed from consideration. The nature of the performance degradation caused by this one cell is briefly discussed. As a result of this test, changes were made to improve some aspects of the solar cell coupon-to-support frame interface on the flight unit. It was concluded from the results that the integration of the U.S. solar cell modules with the Russian support structure would be able to withstand at least 24,000 thermal cycles (4 years on-orbit). This was considered a successful development test.

  10. SolarOil Project, Phase I preliminary design report. [Solar Thermal Enhanced Oil Recovery project

    Energy Technology Data Exchange (ETDEWEB)

    Baccaglini, G.; Bass, J.; Neill, J.; Nicolayeff, V.; Openshaw, F.

    1980-03-01

    The preliminary design of the Solar Thermal Enhanced Oil Recovery (SolarOil) Plant is described in this document. This plant is designed to demonstrate that using solar thermal energy is technically feasible and economically viable in enhanced oil recovery (EOR). The SolarOil Plant uses the fixed mirror solar concentrator (FMSC) to heat high thermal capacity oil (MCS-2046) to 322/sup 0/C (611/sup 0/F). The hot fluid is pumped from a hot oil storage tank (20 min capacity) through a once-through steam generator which produces 4.8 MPa (700 psi) steam at 80% quality. The plant net output, averaged over 24 hr/day for 365 days/yr, is equivalent to that of a 2.4 MW (8.33 x 10/sup 6/ Btu/hr) oil-fired steam generator having an 86% availability. The net plant efficiency is 57.3% at equinox noon, a 30%/yr average. The plant will be demonstrated at an oilfield site near Oildale, California.

  11. Experimental manipulation of a forest ecosystem. The Klosterhede-project. Project description

    Energy Technology Data Exchange (ETDEWEB)

    Beier, C.; Rasmussen, L.; Hansen, K. [eds.

    1991-04-01

    The report describes the scientific research activities at the Klosterhede research site, Lemvig, West Jutland, Denmark. The site was selected as being located on the most sensitive soil type in Denmark with respect to potential soil acidification, as a permanent observation plot. From including descriptions of the biochemical cycling and ion balances of the forest ecosystem the research has been extended to include manipulations of the water and element fluxes of the ecosystem by means of a roof construction for removal of the atmospheric inputs of strong acids to the soil. A brief overview describes the applied methods and instrumentation, the general objectives, the hypotheses to be tested and the measuring programmes in addition to a description of the site and environmental conditions. Currently, it is considered that forest decline is a multifactoral problem caused by a combined stress on the trees from air pollution, climate, forest management, biological and abiotic influences etc. The project attempts to assess the importance of the various factors contributing to the total stress on the ecosystem. At the Klosterhede site the aim is to test some of the hypotheses by creating different research plots within the same research stand and site, thus ensuring that all soil and climatic factors are comparable whilst different manipulations of the biochemical cycles of the ecosystem are performed. The investigations, which cover nitrogen circulation, denitrification, ecophysiological activity, ectomycorrhiza and fertilization, susceptibility to insect attacks, microbial decomposition etc. are described in detail. (AB) (67 refs.).

  12. Solar heating and cooling demonstration project at the Florida solar energy center

    Science.gov (United States)

    1980-01-01

    The retrofitted solar heating and cooling system installed at the Florida Solar Energy Center is described. The system was designed to supply approximately 70 percent of the annual cooling and 100 percent of the heating load. The project provides unique high temperature, nonimaging, nontracking, evacuated tube collectors. The design of the system was kept simple and employs five hydronic loops. They are energy collection, chilled water production, space cooling, space heating and energy rejection. Information is provided on the system's acceptance test results operation, controls, hardware and installation, including detailed drawings.

  13. Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reyes, Jose A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-02-03

    This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

  14. SOLERAS - Solar Controlled Environment Agriculture Project. Final report, Volume 1. Project summary

    Energy Technology Data Exchange (ETDEWEB)

    1985-12-30

    A summary of the Solar Controlled Environment Agriculture Project is presented. The design of the greenhouses include transparent double pane glass roof with channels for fluid between the panes, inner pane tinted and double pane extruded acrylic aluminized mylar shade and diffuser. Solar energy technologies provide power for water desalination, for pumping irrigation water, and for cooling and heating the controlled environment space so that crops can grow in arid lands. The project is a joint effort between the United States and Saudi Arabia. (BCS)

  15. Plutonium immobilization project development and testing technical project office quality assurance program description

    Energy Technology Data Exchange (ETDEWEB)

    Gould, T H; MacLean, L M; Ziemba, J M

    1999-07-08

    The Plutonium Immobilization Project (PIP) is one of several fissile materials disposition projects managed by the Department of Energy (DOE) Office of Fissile Materials Disposition (OFMD). The PIP is expected to evolve from the current Development and Testing (D and T) effort, to design, to construction, and finally to operations. Overall management and technical management of the D and T effort resides at the Lead Laboratory, Lawrence Livermore National Laboratory (LLNL), through the LLNL Manager, Fissile Materials Disposition Program (FMDP). Day to day project activities are managed by the D and T Technical Project Office (TPO), which reports to the LLNL Manager, FMDP. The D and T TPO consists of the Technical Manager, the TPO Quality Assurance (QA) Program Manager, and TPO Planning and Support Staff. This Quality Assurance Program Description (QAPD) defines the QA policies and controls that will be implemented by these TPO personnel in their management of D and T activities. This QAPD is consistent with and responsive to the Department of Energy Fissile Materials Disposition Program Quality Assurance Requirements Document (FMDP QARD). As the Project and upper level requirement's documents evolve, this QAPD will be updated as necessary to accurately define and describe the QA Program and Management of the PIP. The TPO has a policy that all development and testing activities be planned, performed and assessed in accordance with its customer's requirements, needs and expectations, and with a commitment to excellence and continuous improvement. The TPO QAPD describes implementation requirements which, when completed, will ensure that the project development and testing activities conform to the appropriate QA requirements. For the program to be effective, the TPO QA Program Manager will ensure that each site participating in D and T activities has developed a QAPD, which meets the customer's requirements, and has a designated quality leader in place

  16. 76 FR 62052 - Issuance of a Loan Guarantee to First Solar, Inc., for the Desert Sunlight Solar Farm Project

    Science.gov (United States)

    2011-10-06

    ... (DSSFP or the Project), a 550-megawatt (MW) nominal capacity solar photovoltaic power generating facility... http://nepa.energy.gov . SUPPLEMENTARY INFORMATION: Background The proposed DSSFP is a photovoltaic... east. The Project includes an operations and maintenance facility, solar energy visitor's center, and...

  17. Solar heating and cooling demonstration project at the Florida Solar Energy Center

    Energy Technology Data Exchange (ETDEWEB)

    Hankins, J.D.

    1980-02-01

    The retrofitted solar heating and cooling system installed at the Florida Solar Energy Center is described. Information is provided on the system's test, operation, controls, hardware and installation, including detailed drawings. The Center's office building, approximately 5000 square feet of space, with solar air conditioning and heating as a demonstration of the technical feasibility is located just north of Port Canaveral, Florida. The system was designed to supply approximately 70% of the annual cooling and 100% of the heating load. The project provides unique high-temperature, non-imaging, non-tracking, evacuated-tube collectors. The design of the system was kept simple and employs five hydronic loops. They are energy collection, chilled water production, space cooling, space heating and energy rejection.

  18. Directory of Solar Energy Research Activities in the United States: First Edition, May 1980. [1220 projects

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    Information covering 1220, FY 1978 and FY 1979 solar energy research projects is included. In addition to the title and text of project summaries, the directory contains the following indexes: subject index, investigator index, performing organization index, and supporting organization index. This information was registered with the Smithsonian Science Information Exchange by Federal, State, and other supporting organizations. The project summaries are categorized in the following areas: biomass, ocean energy, wind energy,photovoltaics, photochemical energy conversion, photobiological energy conversion, solar heating and cooling, solar process heat, solar collectors and concentrators, solar thermal electric generation, and other solar energy conversion. (WHK)

  19. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  20. Solar heating and cooling demonstration project at Radian Corporation, Austin, Texas

    Science.gov (United States)

    1980-01-01

    The solar heating and cooling system located at the Radian Corporation, Austin, Texas, is discussed. A technical description of the solar system is presented. The costs of the major components and the cost of installing the system are described. Flow diagrams and photographs of the solar system are provided.

  1. Description of the moderator systems for the ESS project

    Energy Technology Data Exchange (ETDEWEB)

    Stendal, K.

    1996-10-01

    This paper describes a suggestion for the arrangement of the Cold Neutron Sources for the two targets in the ESS project. (European Spallation Source). The suggestion is based upon the technique of the existing cold neutron sources at Risoe in Denmark, HMI and Geestacht in Germany. As moderating media all of them use H{sub 2} in supercritical condition, circulated by blowers, and the safety of the systems is based upon the triple-containment philosophy. This seems to be the most convenient principle to use near the ESS targets, as it provides a larger degree of freedom with respect to the arrangement of these sources and pipe connections to the chambers, especially because the space is limited and access to the target is relatively complicated. The moderator chambers have been designed by KFA, Juelich and the rest of the arrangement by Risoe, DK. The price calculations used for the ESS project are based upon this arrangement. (au).

  2. Information management for nuclear power stations: project description

    Energy Technology Data Exchange (ETDEWEB)

    Halpin, D.W.

    1978-03-01

    A study of the information management structure required to support nuclear power plant construction was performed by a joint university-industry group under the sponsorship of the Department of Energy (DOE), formerly the Energy Research and Development Administration (ERDA). The purpose of this study was (1) to study methods for the control of information during the construction and start-up of nuclear power plants, and (2) identify those data elements intrinsic to nuclear power plants which must be maintained in a structured format for quick access and retrieval. Maintenance of the massive amount of data needed for control of a nuclear project during design, procurement, construction, start-up/testing, and operational phases requires a structuring which allows immediate update and retrieval based on a wide variety of access criteria. The objective of the research described has been to identify design concepts which support the development of an information control system responsive to these requirements. A conceptual design of a Management Information Data Base System which can meet the project control and information exchange needs of today's large nuclear power plant construction projects has been completed and an approach recommended for development and implementation of a complete operational system.

  3. Selections of the metric projection operator and strict solarity of sets with continuous metric projection

    Science.gov (United States)

    Alimov, A. R.

    2017-07-01

    In a broad class of finite-dimensional Banach spaces, we show that a closed set with lower semicontinuous metric projection is a strict sun, admits a continuous selection of the metric projection operator onto it, has contractible intersections with balls, and its (nonempty) intersection with any closed ball is a retract of this ball. For sets with continuous metric projection, a number of new results relating the solarity of such sets to the stability of the operator of best approximation are obtained. Bibliography 25 titles.

  4. Solar demonstration project in a fast-food restaurant

    Science.gov (United States)

    McClenahan, D.

    1980-11-01

    The results of a two-phase program in which the first phase included the successful use of heat reclamation equipment and energy conservation techniques at a typical fast-food restaurant are described. The project's second phase involved the engineering, designing, installation and interfacing of a solar collector system at the facility. The report will help to serve as a guide for other restaurants around the state, and possibly the nation, which wish to install energy saving systems, or adopt energy-saving techniques, geared to their special needs and equipment.

  5. MUNI Ways and Structures Building Integrated Solar Membrane Project

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Randall

    2014-07-03

    The initial goal of the MUNI Ways and Structures Building Integrated Solar Membrane Installation Project was for the City and County of San Francisco (CCSF) to gain experience using the integrated higher efficiency solar photovoltaic (PV) single-ply membrane product, as it differs from the conventional, low efficiency, thin-film PV products, to determine the feasibility of success of larger deployment. As several of CCSF’s municipal rooftops are constrained with respect to weight restrictions, staff of the Energy Generation Group of the San Francisco Public Utilities Commission (SFPUC) proposed to install a solar PV system using single-ply membrane The installation of the 100 kW (DC-STC) lightweight photo voltaic (PV) system at the MUNI Ways and Structures Center (700 Pennsylvania Ave., San Francisco) is a continuation of the commitment of the City and County of San Francisco (CCSF) to increase the pace of municipal solar development, and serve its municipal facilities with clean renewable energy. The fourteen (14) solar photovoltaic systems that have already been installed at CCSF municipal facilities are assisting in the reduction of fossil-fuel use, and reduction of greenhouse gases from fossil combustion. The MUNI Ways & Structures Center roof has a relatively low weight-bearing capacity (3.25 pounds per square foot) and use of traditional crystalline panels was therefore rejected. Consequently it was decided to use the best available highest efficiency Building-Integrated PV (BIPV) technology, with consideration for reliability and experience of the manufacturer which can meet the low weight-bearing capacity criteria. The original goal of the project was to provide an opportunity to monitor the results of the BIPV technology and compare these results to other City and County of San Francisco installed PV systems. The MUNI Ways and Structures Center was acquired from the Cookson Doors Company, which had run the Center for many decades. The building was

  6. Technical Description Lillgrund Wind Power Plant. Lillgrund Pilot Project

    Energy Technology Data Exchange (ETDEWEB)

    Jeppsson, Joakim; Larsen, Poul Erik; Larsson, Aake (Vattenfall Vindkraft AB, Stockholm (Sweden))

    2008-09-15

    Lillgrund offshore wind power plant comprises 48 wind turbines, each rated at 2.3 MW, bringing the total wind farm capacity to 110 MW. The Lillgrund offshore wind power plant is located in a shallow area of Oeresund, 7 km off the coast of Sweden and 7 km south from the Oeresund Bridge connecting Sweden and Denmark. An average wind speed of around 8,5 m/s at hub height, combined with a relatively low water depth of 4 to 8 meters makes it economically feasible to build here. Vattenfall Vindkraft AB is the owner and operator of Lillgrund offshore wind power plant. Lillgrund is a Swedish pilot project supported by the Swedish Energy Agency. The bidding process was completed during 2005 and the offshore power plant was constructed in the period 2006 to 2007. The wind farm was constructed on time and has now been successfully operational since December 2007. There is, however, always potential for improvement and the aim of this report has been to determine and highlight these areas. It is worth noting out that only the electrical system and the foundations are tailor made at offshore wind power plants. The wind turbines are more or less standard products with none or very limited possibilities for project specific design changes. Geotechnical investigations are expensive and it can be difficult to balance the risks as well as the benefits of this expense in the early phases of a large infrastructure project. As a whole, the geotechnical surveys at Lillgrund proved to be useful. They identified potential issues, such as the fact that extra excavation was required for two of the foundations. It also revealed the location of a small number of boulders that would have to be removed. Vattenfall requested a complete study of the electrical system for Lillgrund to be delivered with the bids. That request was not met. Instead Siemens Wind Power began a complete electrical system study after being awarded the Contract. The electrical system study was completed during the

  7. Thermal power generation projects ``Large Scale Solar Heating``; EU-Thermie-Projekte ``Large Scale Solar Heating``

    Energy Technology Data Exchange (ETDEWEB)

    Kuebler, R.; Fisch, M.N. [Steinbeis-Transferzentrum Energie-, Gebaeude- und Solartechnik, Stuttgart (Germany)

    1998-12-31

    The aim of this project is the preparation of the ``Large-Scale Solar Heating`` programme for an Europe-wide development of subject technology. The following demonstration programme was judged well by the experts but was not immediately (1996) accepted for financial subsidies. In November 1997 the EU-commission provided 1,5 million ECU which allowed the realisation of an updated project proposal. By mid 1997 a small project was approved, that had been requested under the lead of Chalmes Industriteteknik (CIT) in Sweden and is mainly carried out for the transfer of technology. (orig.) [Deutsch] Ziel dieses Vorhabens ist die Vorbereitung eines Schwerpunktprogramms `Large Scale Solar Heating`, mit dem die Technologie europaweit weiterentwickelt werden sollte. Das daraus entwickelte Demonstrationsprogramm wurde von den Gutachtern positiv bewertet, konnte jedoch nicht auf Anhieb (1996) in die Foerderung aufgenommen werden. Im November 1997 wurden von der EU-Kommission dann kurzfristig noch 1,5 Mio ECU an Foerderung bewilligt, mit denen ein aktualisierter Projektvorschlag realisiert werden kann. Bereits Mitte 1997 wurde ein kleineres Vorhaben bewilligt, das unter Federfuehrung von Chalmers Industriteknik (CIT) in Schweden beantragt worden war und das vor allem dem Technologietransfer dient. (orig.)

  8. 78 FR 45268 - Notice of Availability of the San Diego Gas & Electric Ocotillo Sol Solar Project Final...

    Science.gov (United States)

    2013-07-26

    ... construct, operate, maintain, and decommission the Ocotillo Sol Solar Project, a solar photovoltaic (PV... PV modules and mounting structures, a maintenance building with an associated parking area, internal...

  9. Database Description - Budding yeast cDNA sequencing project | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us Budding yeast cDNA sequencing project Database Description General information of database D...ases Organism Taxonomy Name: Saccharomyces cerevisiae Taxonomy ID: 4932 Database description 5'-end sequence...nuine 5'-end, mapping the 5'-end sequence to the genome will lead to accurate identification of the transcript... title: A large-scale full-length cDNA analysis to explore the budding yeast transcriptome. Author name(s): ...rvices Not available URL of Web services - Need for user registration - About This Database Database Descript

  10. Solar Schools Assessment and Implementation Project: Financing Options for Solar Installations on K-12 Schools

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, J.; Kandt, A.

    2011-10-01

    This report focuses on financial options developed specifically for renewable energy and energy efficiency projects in three California public school districts. Solar energy systems installed on public schools have a number of benefits that include utility bill savings, reductions in greenhouse gas emissions (GHGs) and other toxic air contaminants, job creation, demonstrating environmental leadership, and creating learning opportunities for students. In the 2011 economic environment, the ability to generate general-fund savings as a result of reducing utility bills has become a primary motivator for school districts trying to cut costs. To achieve meaningful savings, the size of the photovoltaic (PV) systems installed (both individually on any one school and collectively across a district) becomes much more important; larger systems are required to have a material impact on savings. Larger PV systems require a significant financial commitment and financing therefore becomes a critical element in the transaction. In simple terms, school districts can use two primary types of ownership models to obtain solar installations and cost savings across a school district. The PV installations can be financed and owned directly by the districts themselves. Alternatively, there are financing structures whereby another entity, such as a solar developer or its investors, actually own and operate the PV systems on behalf of the school district. This is commonly referred to as the 'third-party ownership model.' Both methods have advantages and disadvantages that should be weighed carefully.

  11. Project description:

    DEFF Research Database (Denmark)

    Schindel, David E.; Stoeckle, Mark Y.; Milensky, Christopher M.

    2011-01-01

    The Division of Birds, National Museum of Natural History, Smithsonian Institution in Washington, DC, has obtained and released DNA barcodes for 2808 frozen tissue samples. Of the 1,403 species represented by these samples, 1,147 species have not been barcoded previously. This data release increa...

  12. SOLERAS - Solar Controlled Environment Agriculture Project. Final report, Volume 5. Science Applications, Incorporated system requirements definition

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    This report sets forth the system requirements for a Solar Controlled-Environment Agriculture System (SCEAS) Project. In the report a conceptual baseline system description for an engineering test facility is given. This baseline system employs a fluid roof/roof filter in combination with a large storage tank and a ground water heat exchanger in order to provide cooling and heating as needed. Desalination is accomplished by pretreatment followed by reverse osmosis. Energy is provided by means of photovoltaics and wind machines in conjunction with storage batteries. Site and climatic data needed in the design process are given. System performance specifications and integrated system design criteria are set forth. Detailed subsystem design criteria are presented and appropriate references documented.

  13. Rabaska Project : layout of a methane terminal : project description; Projet Rabaska : implantation d'un terminal methanier : description de projet

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-06-01

    This paper outlined the strategic motivations for the Rabaska project along with a project description and its status. Gaz Metro, Enbridge Inc., and Gaz de France are the 3 proponents of the project which involves the construction of a liquefied natural gas (LNG) import terminal facility in the St. Lawrence River near Levis, Quebec. It involves the construction of a deep water terminal to accommodate methane tankers which transport LNG. The authorization for the project must be obtained by the end of 2005 in order to meet the projected in-service date of 2008. The terminal includes a pier, a cryogenic control station for unloading the tankers, and storage tanks that will maintain the LNG at -160 degrees C. Following the regasification of LNG, natural gas would be transported via a new pipeline to an existing pipeline operated by Gazoduc TQM Inc. which serves the Quebec-Ontario corridor. The project ensures energy supplies for Quebec and significantly improves the province's energy balance while promoting the competitiveness of Quebec companies in offering a clean, reliable and economically viable energy alternative. In addition to supporting the recruitment of a local workforce, the project will lead to a newly acquired expertise in Quebec. This paper identified the route that ocean-going tankers would travel through in the St. Lawrence River and addressed environmental concerns regarding the potential sources of LNG spills and their associated hazards to fish, fish habitat and navigable waters. Concerns regarding the visual impact of the project were also addressed. 9 figs. 2 appendices.

  14. Indonesia solar home systems project for rural electrification

    Energy Technology Data Exchange (ETDEWEB)

    Sanghvi, A.P.

    1997-12-01

    This paper presents, from a financing aspect the broad issues involved in a plan to provide solar home systems (SHS) to provide rural electrification in several areas of rural Indonesia. The paper discusses the approaches being used to provide funding, develop awareness of the technology, and assure the success of the project. The plan involves the use of grant money to help with some of the initial costs of such systems, and thereby to encourage local financing on a terms rather than cash basis. There are needs for market development, and development of a business structure in the country to support this type of technology. Provided this plan can succeed, it may serve as a model for further efforts.

  15. The Solar Radiation and Climate Experiment (SORCE) Mission Description and Early Results

    CERN Document Server

    Rottman, G; George, V

    2005-01-01

    This book describes the state-of-the art instruments for measuring the solar irradiance from soft x-ray to the near infrared and the total solar irradiance. Furthermore, the SORCE mission and early results on solar variability are presented along with papers that provide an overview of solar influences on Earth.

  16. Human projected area factors for detailed direct and diffuse solar radiation analysis

    DEFF Research Database (Denmark)

    Kubaha, K.; Fiala, D.; Toftum, Jørn

    2004-01-01

    Projected area factors for individual segments of the standing and sedentary human body were modelled for both direct and diffuse solar radiation using detailed 3D geometry and radiation models. The local projected area factors with respect to direct short-wave radiation are a function of the solar...

  17. Developing, testing, evaluating and optimizing solar heating systems. Project status report for October and November 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report describes progress on 3 projects: Integrated tank/heat exchanger modeling and experiments for solar thermal storage; Advanced residential solar domestic hot water systems; and Incident angle modifiers (IAMs) by the Monte Carlo method for cylindrical solar collectors. IAMs are used to correct for effects such as shading, back plane reflectance, inter-reflection, etc. Summaries are given for the first two projects; however, a full draft report is given for the third.

  18. Soboba Community Energy Solar Project – Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    Castello, Michael [Soboba Band of Luiseno Indians, San Jacinto, CA (United States); DeForge, Deborah [Soboba Band of Luiseno Indians, San Jacinto, CA (United States); Estrada, Steven [Soboba Band of Luiseno Indians, San Jacinto, CA (United States)

    2017-03-29

    Since time immemorial the descendants of the Soboba people are those whom have lived on and occupied the land that is presently known as the cities of San Jacinto, Hemet, Valle Vista and Winchester. On June 19, 1883, President Chester Arthur by Executive Order established the Soboba Indian Reservation, a 3,172-acre tract which included the Soboba village and the adjacent hills. The President had limited authority as he was only able to set aside public land for the establishment of a reservation and had no authority to take private land. Thus the Soboba village; cultivated lands and major springs were part of Rancho San Jacinto Viejo and belonged to Matthew Byrne. Today the Soboba Indian Reservation lies in the lower reaches of the San Jacinto Mountains, across the San Jacinto River from the city of San Jacinto. The Soboba Band of Luiseño Indians was awarded a community solar grant through the U.S. Department of Energy. The incorporated cities of San Jacinto and Hemet, and the unincorporated community of Valle Vista border the Reservation. All three of these surrounding communities have experienced tremendous population growth over the past two decades, with slower growth during the recent economic downturn. The Tribal community that benefits from under this grant includes 1,161 enrolled members, the majority of which live on the reservation. Nearly 41% of the enrolled members are youth, age 18 and under. The elders and community leaders value preserving and maintaining the Luiseño and Cahuilla cultures and Tribal structure for future generations. The proposed project was administered from the Tribal Administration offices located on the reservation. The Soboba Tribal Government consists of five Tribal Members who are elected by the general membership to Tribal Council for a staggered two year term. The Chairman/Chairwoman is elected by a majority vote of the general membership but the positions for Vice-Chair, Tribal Secretary, Tribal Treasurer and Sergeant at

  19. Flat-plate solar array project. Volume 8: Project analysis and integration

    Science.gov (United States)

    Mcguire, P.; Henry, P.

    1986-01-01

    Project Analysis and Integration (PA&I) performed planning and integration activities to support management of the various Flat-Plate Solar Array (FSA) Project R&D activities. Technical and economic goals were established by PA&I for each R&D task within the project to coordinate the thrust toward the National Photovoltaic Program goals. A sophisticated computer modeling capability was developed to assess technical progress toward meeting the economic goals. These models included a manufacturing facility simulation, a photovoltaic power station simulation and a decision aid model incorporating uncertainty. This family of analysis tools was used to track the progress of the technology and to explore the effects of alternative technical paths. Numerous studies conducted by PA&I signaled the achievement of milestones or were the foundation of major FSA project and national program decisions. The most important PA&I activities during the project history are summarized. The PA&I planning function is discussed and how it relates to project direction and important analytical models developed by PA&I for its analytical and assessment activities are reviewed.

  20. A Guide to Community Shared Solar: Utility, Private, and Non-Profit Project Development (Book)

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, J.; Grove, J.; Irvine, L.; Jacobs, J. F.; Johnson Phillips, S.; Sawyer, A.; Wiedman, J.

    2012-05-01

    This guide is organized around three sponsorship models: utility-sponsored projects, projects sponsored by special purpose entities - businesses formed for the purpose of producing community solar power, and non-profit sponsored projects. The guide addresses issues common to all project models, as well as issues unique to each model.

  1. 78 FR 17718 - Notice of Availability of the Record of Decision for the McCoy Solar Energy Project, Riverside...

    Science.gov (United States)

    2013-03-22

    ...) for the McCoy Solar Energy Project (MSEP), a photovoltaic solar electricity generation project. The... proposed would have consisted of an up to 750-megawatt photovoltaic solar energy generation facility and... Bureau of Land Management Notice of Availability of the Record of Decision for the McCoy Solar Energy...

  2. 78 FR 53778 - Notice of Intent To Prepare an Environmental Impact Statement for the Blythe Solar Power Project...

    Science.gov (United States)

    2013-08-30

    ... proposing to construct, operate, maintain, and decommission the BSPP ] using solar photovoltaic (PV... concentrating solar trough to solar PV, adjust other aspects of the project layout related to the technology... Solar Power Project, Riverside County, CA AGENCY: Bureau of Land Management, Interior. ACTION: Notice of...

  3. 78 FR 34403 - Notice of Availability of the Record of Decision for the Quartzsite Solar Energy Project, AZ

    Science.gov (United States)

    2013-06-07

    ... Plan (RMP) for the Quartzsite Solar Energy Project (QSEP). The Acting Assistant Secretary for Land and...) at the following Web site: http://www.blm.gov/az/st/en/prog/energy/solar/quartzsite_solar_energy.html...: Quartzsite Solar Energy LLC, a subsidiary of Solar Reserve LLC, proposes to build the QSEP, a 100-megawatt...

  4. Data catalog series for space science and applications flight missions. Volume 5A: Descriptions of astronomy, astrophysics, and solar physics spacecraft and investigations. Volume 5B: Descriptions of data sets from astronomy, astrophysics, and solar physics spacecraft and investigations

    Science.gov (United States)

    Kim, Sang J. (Editor)

    1988-01-01

    The main purpose of the data catalog series is to provide descriptive references to data generated by space science flight missions. The data sets described include all of the actual holdings of the Space Science Data Center (NSSDC), all data sets for which direct contact information is available, and some data collections held and serviced by foreign investigators, NASA and other U.S. government agencies. This volume contains narrative descriptions of data sets of astronomy, astrophysics, solar physics spacecraft and investigations. The following spacecraft series are included: Mariner, Pioneer, Pioneer Venus, Venera, Viking, Voyager, and Helios. Separate indexes to the planetary and interplanetary missions are also provided.

  5. Affordable High Performance Electromagnetically Clean Solar Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose an Electromagnetically Clean Solar Array (ECSA) with enhanced performance, in Watts/kg and Watts/m2, using flight proven, high efficiency solar cells. For...

  6. Gamma-Ray Imager Polarimeter for Solar Flares Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose here to develop the Gamma-Ray Imager/Polarimeter for Solar flares (GRIPS), the next-generation instrument for high-energy solar observations. GRIPS will...

  7. Steering of Solar Sails Using Optical Lift Force Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This study seeks to look beyond the use of radiation pressure for thrust, and to explore a means of solar navigation whereby a solar craft would be steered by use...

  8. Giving life with the sun: the Darfur solar cookers project

    National Research Council Canada - National Science Library

    Resch, Rhone; Kaye, Noah

    2007-01-01

    ... simple solar cookers to prepare their meals. Most solar cookers work on sunlight being converted to heat energy that is retained for cooking. While there are many successful designs, the most adaptable to the needs of refugees is CooKit, from Solar Cookers International, which is made of cardboard or other local material and is cut into a specific...

  9. Photovoltaic Advanced Research and Development Project: Solar Radiation Research annual report

    Energy Technology Data Exchange (ETDEWEB)

    Riordan, C.; Hulstrom, R.; Cannon, T.; Myers, D.; Stoffel, T.

    1990-11-01

    This report gives an overview of the fiscal year 1990 research activities and results under the Solar Radiation Research Task of the Photovoltaic Advanced Research and Development Project at the Solar Energy Research Institute. The activities under this task include developing and applying measurement techniques, instrumentation, and data and models to understand and quantify the response of photovoltaic devices to variations in broadband and spectra solar radiation. The information presented in this report was presented at the SERI Photovoltaic Advanced Research and Development Project 10th Review Meeting, October 1990, and will be published in a special issue of Solar Cells dedicated to the meeting.

  10. SERI Solar Radiation Resource Assessment Project: Fiscal Year 1990 Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Riordan, C; Maxwell, E; Stoffel, T; Rymes, M; Wilcox, S

    1991-07-01

    The purpose of the Solar Radiation Resource Project is to help meet the needs of the public, government, industry, and utilities for solar radiation data, models, and assessments as required to develop, design, deploy, and operate solar energy conversion systems. The project scientists produce information on the spatial (geographic), temporal (hourly, daily, and seasonal), and spectral (wavelength distribution) variability of solar radiation at different locations in the United States. Resources committed to the project in FY 1990 supported about four staff members, including part-time administrative support. With these resources, the staff must concentrate on solar radiation resource assessment in the United States; funds do not allow for significant efforts to respond to a common need for improved worldwide data. 34 refs., 21 figs., 6 tabs.

  11. JPL - Small Power Systems Applications Project. [for solar thermal power plant development and commercialization

    Science.gov (United States)

    Ferber, R. R.; Marriott, A. T.; Truscello, V.

    1978-01-01

    The Small Power Systems Applications (SPSA) Project has been established to develop and commercialize small solar thermal power plants. The technologies of interest include all distributed and central receiver technologies which are potentially economically viable in power plant sizes of one to 10 MWe. The paper presents an overview of the SPSA Project and briefly discusses electric utility involvement in the Project.

  12. Final project report - CRADA with United Solar Technologies and Pacific Northwest Laboratory (PNL-021): Thin film materials for low-cost high performance solar concentrators

    Energy Technology Data Exchange (ETDEWEB)

    Martin, P. M.; Affinito, J. D.; Gross, M. E.; Bennett, W. D.

    1995-03-01

    The objectives of this project were as follows: To develop and evaluate promising low-cost dielectric and polymer-protected thin-film reflective metal coatings to be applied to preformed continuously-curved solar reflector panels to enhance their solar reflectance, and to demonstrate protected solar reflective coatings on preformed solar concentrator panels. The opportunity for this project arose from a search by United Solar Technologies (UST) for organizations and facilities capable of applying reflective coatings to large preformed panels. PNL was identified as being uniquely qualified to participate in this collaborative project.

  13. Nanostructured InGaP Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The operating conditions of conventional multijunction solar cells are severely limited by the current matching requirements of serially connected devices. The goal...

  14. ParaSol - A Novel Deployable Approach for Very Large Ultra-lightweight Solar Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High power solar arrays with capabilities of >100kW are needed for projected NASA missions. Photovoltaic arrays using deployable membranes with thin cells have...

  15. Heat Pipe Solar Receiver for Oxygen Production of Lunar Regolith Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovative Research project by Advanced Cooling Technologies, Inc. (ACT) will develop an advanced high temperature heat pipe solar receiver that...

  16. A Monolithic, Non-Field-Widened Spatial Heterodyne Spectrometer for Solar System Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this project is to produce a monolithic Spatial Heterodyne Spectrometer (a Fourier Transform Interferometer) for use in Solar System exploration. In...

  17. Baseline process description for simulating plutonium oxide production for precalc project

    Energy Technology Data Exchange (ETDEWEB)

    Pike, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-10-26

    Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO2) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as well as process and facility design details necessary for multi-scale, multi-physics models are provided.

  18. Particle number projecting method for description of pairing effects in metal clusters

    Energy Technology Data Exchange (ETDEWEB)

    Kuzmenko, N. [Khlopin Radium Institute, St. Peterburg (Russian Federation); Nesterenko, V.; Pashkevich, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation). Lab. of Theoretical Physics; Frauendorf, S. [Institut fuer Kern- und Hadronenphysik, Forshungszentrum Rossendorf, Dresden (Germany)

    1996-05-01

    The particle number projecting method for the description of pairing effects in metal clusters is proposed. In contrast with the Bardeen-Cooper-Schrieffer method (BCS) which does not conserve the particle number (thus not providing the necessary accuracy of calculations for small clusters) and has no solutions at sufficiently weak pairing, the projecting method can be applied to both small and large clusters with any pairing strength. As an example, the projection method is used to check the assertion on the pairing origin of the odd-even staggering (OES) in the ionization potentials (IP) of sodium clusters. Both effects of pairing and shape deformation are taken into account simultaneously. In general, the results obtained show that the existence of pairing in sodium clusters is doubtful.

  19. 75 FR 69458 - Notice of Availability of the Record of Decision for the Genesis Solar Energy Project and...

    Science.gov (United States)

    2010-11-12

    ... Bureau of Land Management Notice of Availability of the Record of Decision for the Genesis Solar Energy... Genesis Solar Energy Project (GSEP). The GSEP is a concentrated solar electrical generating facility using...-mail: [email protected] . SUPPLEMENTARY INFORMATION: Genesis Solar, LLC, a wholly owned...

  20. Dust Accumulation and Solar Panel Array Performance on the Mars Exploration Rover (MER) Project

    Science.gov (United States)

    Turgay, Eren H.

    2004-01-01

    One of the most fundamental design considerations for any space vehicle is its power supply system. Many options exist, including batteries, fuel cells, nuclear reactors, radioisotopic thermal generators (RTGs), and solar panel arrays. Solar arrays have many advantages over other types of power generation. They are lightweight and relatively inexpensive, allowing more mass and funding to be allocated for other important devices, such as scientific instruments. For Mars applications, solar power is an excellent option, especially for long missions. One might think that dust storms would be a problem; however, while dust blocks some solar energy, it also scatters it, making it diffuse rather than beamed. Solar cells are still able to capture this diffuse energy and convert it into substantial electrical power. For these reasons, solar power was chosen to be used on the 1997 Mars Pathfinder mission. The success of this mission set a precedent, as NASA engineers have selected solar power as the energy system of choice for all future Mars missions, including the Mars Exploration Rover (MER) Project. Solar sells have their drawbacks, however. They are difficult to manufacture and are relatively fragile. In addition, solar cells are highly sensitive to different parts of the solar spectrum, and finding the correct balance is crucial to the success of space missions. Another drawback is that the power generated is not a constant with respect to time, but rather changes with the relative angle to the sun. On Mars, dust accumulation also becomes a factor. Over time, dust settles out of the atmosphere and onto solar panels. This dust blocks and shifts the frequency of the incoming light, degrading solar cell performance. My goal is to analyze solar panel telemetry data from the two MERs (Spirit and Opportunity) in an effort to accurately model the effect of dust accumulation on solar panels. This is no easy process due to the large number of factors involved. Changing solar

  1. The projective hinge: phylogeny and ontogeny for a new descriptive geometry

    Directory of Open Access Journals (Sweden)

    Agostino De Rosa

    2012-06-01

    Full Text Available The architect- draughtsman uses a theoretical–graphic code whose foundations - of obvious Platonic lineage - attempt to organize and make sense to the reality. Perhaps the most powerful tool that he has in his hands  to translate the existing world in a dense and polysemous model and to envisage the future one, in a compelling and creative way, becomes from descriptive geometry. Today, the context in which the architect works is violently changed and the "geometry", in the digital image, seems to have lost memory of its projective origins. Two loci - one related to the stonecutting’s tradition, the other to the experiences of contemporary art - seem to be able to bring out in a renewed way, "the figures of the demonstration" associated with descriptive geometry.

  2. Renewable Resources: a national catalog of model projects. Volume 1. Northeast Solar Energy Center Region

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Northeast Solar Energy Center Region. (WHK).

  3. Renewable Resources: a national catalog of model projects. Volume 3. Southern Solar Energy Center Region

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Southern Solar Energy Center Region. (WHK)

  4. Renewable Resources: a national catalog of model projects. Volume 4. Western Solar Utilization Network Region

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Western Solar Utilization Network Region. (WHK)

  5. Magnesium Hall Thruster for Solar System Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation being developed in this program is a Mg Hall Effect Thruster system that would open the door for In-Situ Resource Utilization based solar system...

  6. Very Large Ultra-Lightweight Affordable Smart Solar Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Spacecraft for NASA, DoD and commercial missions need higher power, higher voltage, and much lower cost solar arrays to enable a variety of very high power missions....

  7. Solar Power Augmented Electrolysis Module for Energy Storage Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Regenerative fuel cell systems often include a dedicated electrolysis module with solar photovoltaic (PV) panels packaged as a subsystem of the larger energy storage...

  8. InN-Based Quantum Dot Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this STTR program is to employ nanostructured materials in an advanced device design to enhance the tolerance of solar cells to extreme environments...

  9. InN-Based Quantum Dot Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this STTR program is to employ nanostructured materials in advanced device designs to enhance the tolerance of solar cells to extreme conditions while...

  10. Nanostructured InGaP Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Current matching constraints can severely limit the design and overall performance of conventional serially-connected multijunction solar cells. The goal of this...

  11. Deployable Structural Booms for Large Deployable Solar Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of a new generation of large, high power deployable solar arrays has been identified as the most significant challenge facing the development of...

  12. InGaN Nanowire Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has very specific requirements when it comes to power generation technology. Solar panels are an obvious solution but making them suitable for the grueling...

  13. Magnesium Hall Thruster for Solar System Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Busek proposes to prove the feasibility of a Mg Hall effect thruster system that would open the door for In-Situ Resource Utilization (ISRU) based solar system...

  14. Design and Analysis Tools for Deployable Solar Array Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Large, lightweight, deployable solar array structures have been identified as a key enabling technology for NASA with analysis and design of these structures being...

  15. UltraSail Solar Sail Flight Experiment Project

    Data.gov (United States)

    National Aeronautics and Space Administration — CU Aerospace and its University of Illinois teammate propose the design, sub-component fabrication and preliminary test of an UltraSail "Cubesat" 20 m2 solar sail...

  16. Tensioned Rollable Ultra-light Solar array System (TRUSS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TRUSS is a structurally efficient solar array concept that utilizes a TRAC rollable boom and tension-stiffened structure to exceed the program requirements for very...

  17. High Efficiency Quantum Well Waveguide Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The long-term objective of this program is to develop flexible, lightweight, single-junction solar cells using quantum structured designs that can achieve ultra-high...

  18. Modular Ultra-High Power Solar Array Architecture Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Deployable Space Systems, Inc. (DSS) will focus the proposed SBIR program on the development of a new highly-modularized and extremely-scalable solar array that...

  19. 78 FR 53779 - Notice To Extend Mineral Segregation for the Proposed Silver State Solar Project Near Primm in...

    Science.gov (United States)

    2013-08-30

    ... construction, operation, maintenance, and termination of a solar energy generation facility on a portion of the... solar energy project would consist of photovoltaic panels and related ROW appurtenances, including a...

  20. Ground-water-quality assessment of the Delmarva Peninsula, Delaware, Maryland, and Virginia; project description

    Science.gov (United States)

    Bachman, L.J.; Shedlock, R.J.; Phillips, P.J.

    1987-01-01

    In April 1986, the U.S. Geological Survey began a pilot program to assess the quality of the Nation 's surface water and groundwater resources. This National Water-Quality Assessment (NAWQA) program is designed to acquire and interpret information about a wide range of water quality issues. Three groundwater pilot projects have been started, including the project on the Delmarva Peninsula, which covers eastern Maryland and Virginia and most of Delaware. The objectives of the Delmarva project are to: (1) investigate regional groundwater quality on the Delmarva Peninsula, emphasizing a description of the occurrence of trace elements and manmade organic compounds; (2) relate groundwater quality to land use and geohydrologic conditions; and (3) provide a general description of the location, nature, and possible causes of selected water quality problems prevalent in the study area. The shallow aquifer system and the deeper aquifers used for public water supply will be addressed. The shallow aquifer system in the Delmarva Peninsula consists of permeable unconsolidated sand and gravel. Flow systems are localized and small-scale. Farming is common on the peninsula, and the migration of agricultural chemicals to the groundwater system is a local water quality concern. To assess the water quality of the groundwater resources, a regional survey for a wide range of constituents will be conducted in all of the pilot projects to provide a representative sample of groundwater analyses for a national assessment of groundwater quality. Results of this survey may be used as a baseline to monitor future water quality trends. (Lantz-PTT)

  1. Solar Pilot Plant, Phase I. Preliminary design report. Volume II. System description and system analysis. CDRL item 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    Honeywell conducted a parametric analysis of the 10-MW(e) solar pilot plant requirements and expected performance and established an optimum system design. The main analytical simulation tools were the optical (ray trace) and the dynamic simulation models. These are described in detail in Books 2 and 3 of this volume under separate cover. In making design decisions, available performance and cost data were used to provide a design reflecting the overall requirements and economics of a commercial-scale plant. This volume contains a description of this analysis/design process and resultant system/subsystem design and performance.

  2. Singular Strategic Project on bio climatic architecture and solar cooling (PSE-ARFRISOL); Proyecto Singular Estrategico sobre arquitectura bioclimatica y frio solar (PSE-ARFRISOL)

    Energy Technology Data Exchange (ETDEWEB)

    Heras Celemin, M. R.

    2008-07-01

    The R and D activities for the scientific-technological singular strategic Project on Bio climatic Architecture and Solar Cooling PSE-ARFRISOL are being carried out from November 2005 to December 2010. This project aims to demonstrate that bio climatic architecture and low-temperature solar energy are the appropriate basic elements for climatization of future buildings. (Author) 12 refs.

  3. Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Klos, Richard; Wilmot, Roger [Galson Sciences Ltd (United Kingdom)

    2002-09-01

    The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference

  4. Utilizing a scale model solar system project to visualize important planetary science concepts and develop technology and spatial reasoning skills

    Science.gov (United States)

    Kortenkamp, Stephen J.; Brock, Laci

    2016-10-01

    Scale model solar systems have been used for centuries to help educate young students and the public about the vastness of space and the relative sizes of objects. We have adapted the classic scale model solar system activity into a student-driven project for an undergraduate general education astronomy course at the University of Arizona. Students are challenged to construct and use their three dimensional models to demonstrate an understanding of numerous concepts in planetary science, including: 1) planetary obliquities, eccentricities, inclinations; 2) phases and eclipses; 3) planetary transits; 4) asteroid sizes, numbers, and distributions; 5) giant planet satellite and ring systems; 6) the Pluto system and Kuiper belt; 7) the extent of space travel by humans and robotic spacecraft; 8) the diversity of extrasolar planetary systems. Secondary objectives of the project allow students to develop better spatial reasoning skills and gain familiarity with technology such as Excel formulas, smart-phone photography, and audio/video editing.During our presentation we will distribute a formal description of the project and discuss our expectations of the students as well as present selected highlights from preliminary submissions.

  5. 75 FR 62853 - Notice of Availability of the Record of Decision for the Imperial Valley Solar Project and...

    Science.gov (United States)

    2010-10-13

    ..., the project includes an 230 kilovolt electrical transmission line that encumbers approximately 93 acres of public lands from the site to an off-site existing San Diego Gas and Electric substation, a... Solar LLC (IVS) project. The IVS project is a concentrated solar electrical generating facility using...

  6. Utility-Scale Solar 2013: An empirical analysis of project cost, performance, and pricing trends in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Weaver, Samantha [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-09-17

    Other than the SEGS I-IX parabolic trough projects built in the 1980s, virtually no large-scale or "utility-scale" solar projects-defined here to include any ground-mounted photovoltaic ("PV"), concentrating photovoltaic ("CPV"), or concentrating solar power ("CSP" or solar thermal) project larger than 5 MWAC-existed in the United States prior to 2007.

  7. The Helioviewer Project: Solar and Heliospheric Data Visualization

    Science.gov (United States)

    Stys, Jeffrey E.; Ireland, Jack; Müller, Daniel

    2015-04-01

    Helioviewer.org enables the simultaneous exploration of multiple heterogeneous solar and heliospheric data sets. The latest iteration of this open-source web application brings significant visual and functional enhancements to the user interface. Long overdue from a usability perspective, these changes also pave the way for significant new capabilities planned for the future. Emphasis is placed on the solar imagery, which is now always displayed full-screen. Controls for selecting image layers, feature and event annotations, and observation date and time are presented in a light-weight overlay with individually collapsible sub-sections. Secondary functions such as movie and screenshot generation, link and image sharing, news and community videos are now intuitively grouped and kept out of the way until needed. Tight integration with external services such as the Virtual Solar Observatory and SDO Cut-out Service allows scientists to issue precisely defined requests to download science data sets via the web, SolarSoft/IDL, and SunPy/Python after definining and previewing them visually. Finally, documentation of the Helioviewer Public API has been enhanced and expanded, making it simpler to integrate Helioviewer data into scientific workflows.

  8. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume III, Book 1. Design description

    Energy Technology Data Exchange (ETDEWEB)

    1983-12-31

    The design of the 30 MWe central receiver solar power plant to be located at Carrisa Plains, San Luis Obispo County, California, is summarized. The plant uses a vertical flat-panel (billboard solar receiver located at the top of a tower to collect solar energy redirected by approximately 1900 heliostats located to the north of the tower. The solar energy is used to heat liquid sodium pumped from ground level from 610 to 1050/sup 0/F. The power conversion system is a non-reheat system, cost-effective at this size level, and designed for high-efficiency performance in an application requiring daily startup. Successful completion of this project will lead to power generation starting in 1986. This report discusses in detail the design of the collector system, heat transport system, thermal storage subsystem, heat transport loop, steam generation subsystem, electrical, instrumentation, and control systems, power conversion system, master control system, and balance of plant. The performance, facility cost estimate and economic analysis, and development plan are also discussed.

  9. Descriptive and Computer Aided Drawing Perspective on an Unfolded Polyhedral Projection Surface

    Science.gov (United States)

    Dzwierzynska, Jolanta

    2017-10-01

    The aim of the herby study is to develop a method of direct and practical mapping of perspective on an unfolded prism polyhedral projection surface. The considered perspective representation is a rectilinear central projection onto a surface composed of several flat elements. In the paper two descriptive methods of drawing perspective are presented: direct and indirect. The graphical mapping of the effects of the representation is realized directly on the unfolded flat projection surface. That is due to the projective and graphical connection between points displayed on the polyhedral background and their counterparts received on the unfolded flat surface. For a significant improvement of the construction of line, analytical algorithms are formulated. They draw a perspective image of a segment of line passing through two different points determined by their coordinates in a spatial coordinate system of axis x, y, z. Compared to other perspective construction methods that use information about points, for computer vision and the computer aided design, our algorithms utilize data about lines, which are applied very often in architectural forms. Possibility of drawing lines in the considered perspective enables drawing an edge perspective image of an architectural object. The application of the changeable base elements of perspective as a horizon height and a station point location enable drawing perspective image from different viewing positions. The analytical algorithms for drawing perspective images are formulated in Mathcad software, however, they can be implemented in the majority of computer graphical packages, which can make drawing perspective more efficient and easier. The representation presented in the paper and the way of its direct mapping on the flat unfolded projection surface can find application in presentation of architectural space in advertisement and art.

  10. 77 FR 23275 - Notice of Availability of the Draft enXco Desert Harvest Solar Farm Project Environmental Impact...

    Science.gov (United States)

    2012-04-18

    ...-way (ROW) authorization to construct, operate, maintain, and decommission a solar photovoltaic (PV... maintenance facilities, a transmission line, and temporary construction lay down areas. The project's 230...

  11. Salton Sea Project, Phase 1. [solar pond power plant

    Science.gov (United States)

    Peelgren, M. L.

    1982-01-01

    A feasibility study was made for a salt gradient solar pond power plant in or near the Salton Sea of California. The conclusions support continuance 5-MWe proof-of-concept experiment, and ultimate construction by an electric utility company of a 600-MWe plant. The Solar Pond concept would be an environmental benefit to the Salton Sea by reversing the increasing salinity trend. The greatest cost drivers are the lake dike construction and pond sealing. Problems to be resolved include method of brine production from Salton Sea water for the first unit (which requires evaporation pond area and time), the high turbidity and color content of the Salton Sea water (which requires pretreatment), and other questions related to pond permeability, bio-activity and soil/brine chemical reactions. All technical and environmental problems appear solvable and/or manageable if care is taken in mitigating impacts.

  12. A description of the solar wind-magnetosphere coupling based on nonlinear filters

    Science.gov (United States)

    Vassiliadis, D.; Klimas, A. J.; Baker, D. N.; Roberts, D. A.

    1995-01-01

    A nonlinear filtering method is introduced for the study of the solar wind -- magnetosphere coupling and related to earlier linear techniques. The filters are derived from the magnetospheric state, a representation of the magnetospheric conditions in terms of a few global variables, here the auroral electrojet indices. The filters also couple to the input, a representation of the solar wind variables, here the rectified electric field. Filter-based iterative prediction of the indices has been obtained for up to 20 hours. The prediction is stable with respect to perturbations in the initial magnetospheric state; these decrease exponentially at the rate of 30/min. The performance of the method is examined for a wide range of parameters and is superior to that of other linear and nonlinear techniques. In the magnetospheric state representation the coupling is modeled as a small number of nonlinear equations under a time-dependent input.

  13. DOE passive solar commercial buildings program: project summaries

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The 23 projects participating in this program comprise a wide range of building types including offices, retail establishments, educational facilities, public service facilities, community and visitor centers, and private specialized-use facilities, located throughout the United States. Summary data and drawings are presented for each project. (MHR)

  14. Sources of Differences in On-Orbit Total Solar Irradiance Measurements and Description of Proposed Laboratory Intercomparison

    Science.gov (United States)

    Butler, J.J.; Johnson, B. C.; Rice, J. P.; Shirley, E. L.; Barnes, R.A.

    2008-01-01

    There is a 5 W/sq m (about 0.35 %) difference between current on-orbit Total Solar Irradiance (TSI) measurements. On 18-20 July 2005, a workshop was held at the National Institute of Standards and Technology (NIST) in Gaithersburg, Maryland that focused on understanding possible reasons for this difference, through an examination of the instrument designs, calibration approaches, and appropriate measurement equations. The instruments studied in that workshop included the Active Cavity Radiometer Irradiance Monitor III (ACRIM III) on the Active Cavity Radiometer Irradiance Monitor SATellite (ACRIMSAT), the Total Irradiance Monitor (TIM) on the Solar Radiation and Climate Experiment (SORCE), the Variability of solar IRradiance and Gravity Oscillations (VIRGO) on the Solar and Heliospheric Observatory (SOHO), and the Earth Radiation Budget Experiment (ERBE) on the Earth Radiation Budget Satellite (ERBS). Presentations for each instrument included descriptions of its design, its measurement equation and uncertainty budget, and the methods used to assess on-orbit degradation. The workshop also included a session on satellite- and ground-based instrument comparisons and a session on laboratory-based comparisons and the application of new laboratory comparison techniques. The workshop has led to investigations of the effects of diffraction and of aperture area measurements on the differences between instruments. In addition, a laboratory-based instrument comparison is proposed that uses optical power measurements (with lasers that underEll the apertures of the TSI instruments), irradiance measurements (with lasers that overfill the apertures of the TSI instrument), and a cryogenic electrical substitution radiometer as a standard for comparing the instruments. A summary of the workshop and an overview of the proposed research efforts are presented here.

  15. The pioneer projects: Economical exploration of the solar system

    Science.gov (United States)

    Spahr, J. R.; Hall, C. F.

    1975-01-01

    The interplanetary Pioneer missions are reviewed in terms of management implications and cost control. The responsibilities, organizational structure, and management practices of the Pioneer Projects are presented. The lines of authority and areas of responsibility of the principal organizational elements supporting the Pioneer missions are identified, and the methods employed for maintaining effective and timely interactions among these elements are indicated. The technical and administrative functions of the various organizational elements of the Pioneer Project Office at Ames Research Center are described in terms of their management responsibilities and interactions with other elements of the Project Office and with external organizations having Pioneer Project responsibilities. The management and control of activities prior to and during the hardware procurement phase are described to indicate the basis for obtaining visibility of the technical progress, utilization of resources, and cost performance of the contractors and other institutions supporting the Pioneer projects.

  16. Implementing the patient-centered medical home: observation and description of the national demonstration project.

    Science.gov (United States)

    Stewart, Elizabeth E; Nutting, Paul A; Crabtree, Benjamin F; Stange, Kurt C; Miller, William L; Jaén, Carlos Roberto

    2010-01-01

    We provide an overall description of the National Demonstration Project (NDP) intervention to transform family practices into patient-centered medical homes. An independent evaluation team used multiple data sources and methods to describe the design and implementation of the NDP. These included direct observation of the implementation team and project meetings, site visits to practices, depth interviews with practice members and implementation team members, access to practice communications (eg, telephone calls, e-mails), and public domain materials (eg, the NDP Web site). The American Academy of Family Physicians created a new division called TransforMED, which launched the 24-month NDP in June 2006. From 337 family medicine practices completing an extensive online application, 36 were selected and randomized to a facilitated group, which received tailored, intensive assistance and services from TransforMED, or a self-directed group, which received very limited assistance. Three facilitators from diverse backgrounds in finance, practice management, and organizational psychology used multiple practice change strategies including site visits, e-mails, metrics, and learning sessions. The self-directed practices worked primarily on their own, but self-organized a retreat midway through the project. The intervention model for the project evolved to be consistent with the emerging national consensus principles of the patient-centered medical home. The independent evaluation team studied the NDP and provided ongoing feedback to inform the implementation process. The NDP illustrates that complex practice change interventions must combine flexibility in the intervention model, implementation strategy, and the evaluation, in order to maximize ongoing learning.

  17. Surface-water-quality assessment of the Yakima River basin, Washington; project description

    Science.gov (United States)

    McKenzie, S.W.; Rinella, J.F.

    1987-01-01

    In April 1986, the U.S. Geological Survey began the National Water Quality Assessment program to: (1) provide a nationally consistent description of the current status of water quality, (2) define water quality trends that have occurred over recent decades, and (3) relate past and present water quality conditions to relevant natural features, the history of land and water use, and land management and waste management practices. At present (1987), The National Water Quality Assessment program is in a pilot studies phase, in which assessment concepts and approaches are being tested and modified to prepare for possible full implementation of the program. Seven pilot projects (four surface water projects and three groundwater projects) have been started. The Yakima River basin in Washington is one of the pilot surface water project areas. The Yakima River basin drains in area of 6,155 sq mi and contains about 1,900 river mi of perennial streams. Major land use activities include growing and harvesting timber, dryland pasture grazing, intense farming and irrigated agriculture, and urbanization. Water quality issues that result from these land uses include potentially large concentrations of suspended sediment, bacteria, nutrients, pesticides, and trace elements that may affect water used for human consumption, fish propagation and passage, contact recreation, livestock watering, and irrigation. Data will be collected in a nine year cycle. The first three years of the cycle will be a period of concentrated data acquisition and interpretation. For the next six years, sample collection will be done at a much lower level of intensity to document the occurrence of any gross changes in water quality. This nine year cycle would then be repeated. Three types of sampling activities will be used for data acquisition: fixed location station sampling, synoptic sampling, and intensive reach studies. (Lantz-PTT)

  18. Japan`s new sunshine project. 1995 annual summary of solar energy R and D program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The paper reported the details of the research results of the New Sunshine Project in fiscal 1995. As for the technical development for the practical use of photovoltaic power systems, the development of manufacturing technologies for low-cost substrates and the low-cost fabrication of multicrystalline solar cells/modules were conducted as the development of technology for thin substrate polycrystalline solar cells for practical use. As the research on fabrication technology for thin film solar cells for practical use, conducted were the research on low-cost fabrication technology for large-area modules and the technological development for qualitative improvement. The paper further made the technological development for super-high efficiency solar cells, the research and development of evaluation system for photovoltaic power generation system, the research and development of peripheral technology for photovoltaic power system, the research and development of system to utilize photovoltaic energy, the demonstrative research of the photovoltaic power system, etc. As to the research and development of photovoltaic power systems, conducted were the characterization and control of surface/interface recombination velocity of crystalline silicon thin films, the research on surface passivation for high-efficiency silicon solar cells, etc. Moreover, with relation to the utilization technology of solar thermal energy, the paper made the research on advanced solar components, the research and development of utilization technology of solar thermal system for industrial and other uses, etc. 302 figs., 58 tabs.

  19. 75 FR 66389 - Notice of Availability of the Record of Decision for the Blythe Solar Power Project and...

    Science.gov (United States)

    2010-10-28

    ... Bureau of Land Management Notice of Availability of the Record of Decision for the Blythe Solar Power... right-of-way (ROW) application CACA-048811 for the proposed Blythe Solar Power Project (BSPP). Chevron... solar generation facilities on public lands, requires that all sites associated with power generation or...

  20. 77 FR 28618 - Notice of Availability of the San Diego Gas & Electric Ocotillo Sol Solar Project Draft...

    Science.gov (United States)

    2012-05-15

    ... decommission the Ocotillo Sol project, a solar photovoltaic (PV) power plant facility, on approximately 115... alternatives. The CDCA plan, while recognizing the potential compatibility of solar energy facilities on public... Bureau of Land Management Notice of Availability of the San Diego Gas & Electric Ocotillo Sol Solar...

  1. High Radiation Resistance Inverted Metamorphic Solar Cell Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation in this SBIR Phase II project is the development of a unique triple junction inverted metamorphic technology (IMM), which will enable the...

  2. High Radiation Resistance Inverted Metamorphic Solar Cell Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation in the proposed SBIR Phase I project is the development of a unique triple unction inverted metamorphic technology (IMM), which will enable the...

  3. Cumulative biological impacts framework for solar energy projects in the California Desert

    Science.gov (United States)

    Davis, Frank W.; Kreitler, Jason R.; Soong, Oliver; Stoms, David M.; Dashiell, Stephanie; Hannah, Lee; Wilkinson, Whitney; Dingman, John

    2013-01-01

    This project developed analytical approaches, tools and geospatial data to support conservation planning for renewable energy development in the California deserts. Research focused on geographical analysis to avoid, minimize and mitigate the cumulative biological effects of utility-scale solar energy development. A hierarchical logic model was created to map the compatibility of new solar energy projects with current biological conservation values. The research indicated that the extent of compatible areas is much greater than the estimated land area required to achieve 2040 greenhouse gas reduction goals. Species distribution models were produced for 65 animal and plant species that were of potential conservation significance to the Desert Renewable Energy Conservation Plan process. These models mapped historical and projected future habitat suitability using 270 meter resolution climate grids. The results were integrated into analytical frameworks to locate potential sites for offsetting project impacts and evaluating the cumulative effects of multiple solar energy projects. Examples applying these frameworks in the Western Mojave Desert ecoregion show the potential of these publicly-available tools to assist regional planning efforts. Results also highlight the necessity to explicitly consider projected land use change and climate change when prioritizing areas for conservation and mitigation offsets. Project data, software and model results are all available online.

  4. MedHySol: Future federator project of massive production of solar hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Mahmah, Bouziane; Harouadi, Farid; Chader, Samira; Belhamel, Maiouf; M' Raoui, Abdelhamid; Abdeladim, Kamel [CDER, BP 62, Route de l' Observatoire, Bouzareah, Alger (Algeria); Benmoussa, H. [LESEI, Universite de Batna, Batna (Algeria); Cherigui, Adel Nasser [Universite Joseph Fourier Grenoble I, BP 87, Saint-Martin-D' Heres 38400 (France); Etievant, Claude [CETH, Innov' valley Entreprises, 91460 Marcoussis (France)

    2009-06-15

    Mediterranean Hydrogen Solar (MedHySol) is a federator project for development of a massive hydrogen production starting from solar energy and its exportation within a framework of a Euro-Maghrebian Cooperation project for industrial and energetic needs in the Mediterranean basin. The proposal of this project is included in the Algiers Declaration's on Hydrogen from Renewable Origin following the organization of the first international workshop on hydrogen which was held in 2005. Algeria is the privileged site to receive the MedHySol platform. The objective of the first step of the project is to realize a technological platform allowing the evaluation of emergent technologies of hydrogen production from solar energy with a significant size (10-100 kW) and to maintain the development of energetic rupture technologies. The second step of the project is to implement the most effective and less expensive technologies to pilot great projects (1-1000 MW). In this article we present the potentialities and the feasibility of MedHySol, as well as the fundamental elements for a scientific and technical supervision of this great project. (author)

  5. THE HUNT FOR EXOMOONS WITH KEPLER (HEK). I. DESCRIPTION OF A NEW OBSERVATIONAL PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Kipping, D. M. [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Bakos, G. A. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 05844 (United States); Buchhave, L. [Niels Bohr Institute, Copenhagen University (Denmark); Nesvorny, D. [Department of Space Studies, Southwest Research Institute, 1050 Walnut Street, Suite 300, Boulder, CO 80302 (United States); Schmitt, A., E-mail: dkipping@cfa.harvard.edu [Citizen Scientist, 60 Garden Street, Cambridge, MA 02138 (United States)

    2012-05-10

    Two decades ago, empirical evidence concerning the existence and frequency of planets around stars, other than our own, was absent. Since that time, the detection of extrasolar planets from Jupiter-sized to, most recently, Earth-sized worlds has blossomed and we are finally able to shed light on the plurality of Earth-like, habitable planets in the cosmos. Extrasolar moons may also be frequently habitable worlds, but their detection or even systematic pursuit remains lacking in the current literature. Here, we present a description of the first systematic search for extrasolar moons as part of a new observational project called 'The Hunt for Exomoons with Kepler' (HEK). The HEK project distills the entire list of known transiting planet candidates found by Kepler (2326 at the time of writing) down to the most promising candidates for hosting a moon. Selected targets are fitted using a multimodal nested sampling algorithm coupled with a planet-with-moon light curve modeling routine. By comparing the Bayesian evidence of a planet-only model to that of a planet-with-moon, the detection process is handled in a Bayesian framework. In the case of null detections, upper limits derived from posteriors marginalized over the entire prior volume will be provided to inform the frequency of large moons around viable planetary hosts, {eta} leftmoon. After discussing our methodologies for target selection, modeling, fitting, and vetting, we provide two example analyses.

  6. 1980 annual report of the Coolidge Solar Irrigation Project

    Energy Technology Data Exchange (ETDEWEB)

    Torkelson, L.; Larson, D. L.

    1981-02-01

    The Coolidge Solar Irrigation Facility at Coolidge, Arizona, consists of a 2136.8-m/sup 2/ (23,000-ft/sup 2/) line-focus parabolic trough collector subsystem, a 113.55-m/sup 3/ (30,000-gallon) thermal storage subsystem, and a 150-kW/sub e/ (142.2-Btu/s) organic Rankine cycle power generation unit. The performance of the facility and its operational and maintenance requirements are reported. The period from the the facility's initial operation in October 1979 to 31 August 1980 is covered.

  7. Projecte d'energia solar tèrmica

    OpenAIRE

    Maldonado Noguera, Fernando

    2010-01-01

    El proyecto consiste en el diseño de una instalación solar térmica para producción de agua caliente sanitaria (ACS) en un edificio de nueva construcción en la localidad de Mollerussa (Lleida). Se han estudiado las necesidades térmicas de ACS en atención a las características constructivas y funcionales del edificio, dando cumplimiento a la normativa vigente. Conocida la demanda energética esperada, se han analizado los datos climatológicos y de temperatura de red de agua fría propios del empl...

  8. Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview

    Energy Technology Data Exchange (ETDEWEB)

    Mendelsohn, M.; Lowder, T.; Canavan, B.

    2012-04-01

    Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

  9. Protocol of measurement techniques - Project colored solar collectors

    Energy Technology Data Exchange (ETDEWEB)

    Schueler, A.; Chambrier, E. De; Roecker, Ch.; Scartezzini, J.-L.

    2004-08-15

    This illustrated annual report for the Swiss Federal Office of Energy (SFOE) takes a look at work done at the Swiss Federal Institute of Technology in Lausanne, Switzerland, on multi-layer, thin-film interference coatings for solar collector glazing. The correct combinations of refractive indices and film thickness are discussed. The authors state that corresponding multi-layered thin film stacks will have to be realised experimentally in a controlled and reproducible way. New thin film materials are to be tailored to exhibit optimised optical and ageing properties. The development of these coatings is to be based on various measurement techniques, such as spectro-photometry, measurements of total power throughput by means of a solar simulator, spectroscopic ellipsometry, scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The paper provides many examples of typical data and explains which film properties can be inferred from each method and thus describes both the function and purpose of the different measurement techniques.

  10. Water use and supply concerns for utility-scale solar projects in the Southwestern United States.

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Geoffrey Taylor; Tidwell, Vincent Carroll; Reno, Marissa Devan; Moreland, Barbara Denise.; Zemlick, Katie M.; Macknick, Jordan

    2013-07-01

    As large utility-scale solar photovoltaic (PV) and concentrating solar power (CSP) facilities are currently being built and planned for locations in the U.S. with the greatest solar resource potential, an understanding of water use for construction and operations is needed as siting tends to target locations with low natural rainfall and where most existing freshwater is already appropriated. Using methods outlined by the Bureau of Land Management (BLM) to determine water used in designated solar energy zones (SEZs) for construction and operations & maintenance, an estimate of water used over the lifetime at the solar power plant is determined and applied to each watershed in six Southwestern states. Results indicate that that PV systems overall use little water, though construction usage is high compared to O&M water use over the lifetime of the facility. Also noted is a transition being made from wet cooled to dry cooled CSP facilities that will significantly reduce operational water use at these facilities. Using these water use factors, estimates of future water demand for current and planned solar development was made. In efforts to determine where water could be a limiting factor in solar energy development, water availability, cost, and projected future competing demands were mapped for the six Southwestern states. Ten watersheds, 9 in California, and one in New Mexico were identified as being of particular concern because of limited water availability.

  11. The Pioneer Projects - Economical exploration of the solar system

    Science.gov (United States)

    Spahr, J. R.; Hall, C. F.

    1975-01-01

    The interplanetary Pioneer missions are reviewed in terms of management implications and cost control. The responsibilities, organizational structure, and management practices of the Pioneer Projects are presented. The lines of authority and areas of responsibility of the principal organizational elements supporting the Pioneer missions are identified, and the methods employed for maintaining effective and timely interactions among these elements are indicated. The technical and administrative functions of various organizational elements of the project are described. The management and control of activities prior to and during the hardware procurement phase are described to indicate the basis for obtaining visibility of the technical progress, utilization of resources, and cost performance of the contractors and other institutions supporting the Pioneer projects.

  12. The Solar City Daegu 2050 Project: Visions for a Sustainable City

    Science.gov (United States)

    Kim, Jong-dall; Han, Dong-hi; Na, Jung-gyu

    2006-01-01

    The Solar City Daegu 2050 Project (SCD 2050) represents a comprehensive model for shaping the future of this city of 2.5 million residents with a mixed industrial and services economic base. Its specific aims are as follows: realization of a carbon footprint consistent with standards of global sustainability and equity; the development of a…

  13. National Program for Solar Heating and Cooling of Buildings. Project Data Summaries. Vol. II: Demonstration Support.

    Science.gov (United States)

    Energy Research and Development Administration, Washington, DC. Div. of Solar Energy.

    Brief abstracts of projects funded by the Energy Research and Development Administration (ERDA) and conducted under the National Program for Solar Heating and Cooling of Buildings are presented in three volumes. This, the second volume, identifies the major efforts currently underway in support of the national program. The National Aeronautics and…

  14. Solar Collector Design Optimization: A Hands-on Project Case Study

    Science.gov (United States)

    Birnie, Dunbar P., III; Kaz, David M.; Berman, Elena A.

    2012-01-01

    A solar power collector optimization design project has been developed for use in undergraduate classrooms and/or laboratories. The design optimization depends on understanding the current-voltage characteristics of the starting photovoltaic cells as well as how the cell's electrical response changes with increased light illumination. Students…

  15. 78 FR 28841 - Quartzsite Solar Energy Project Record of Decision (DOE/EIS-0440)

    Science.gov (United States)

    2013-05-16

    ... Area Power Administration Quartzsite Solar Energy Project Record of Decision (DOE/EIS-0440) AGENCY: Western Area Power Administration, DOE. ACTION: Record of Decision. SUMMARY: Western Area Power Administration (Western), an agency within the U.S. Department of Energy (DOE), received a request from...

  16. Solar Heating/Cooling of Buildings: Current Building Community Projects. An Interim Report.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC. Building Research Advisory Board.

    Projects being carried out by the private sector involving the use of solar energy for heating and cooling buildings are profiled in this report. A substantial portion of the data were collected from a broad cross-section of the building community. Data collection efforts also involved the canvassing of the nearly 200 trade and professional…

  17. Photovoltaic concentrator technology development project. Sixth project integration meeting

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Thirty-three abstracts and short papers are presented which describe the current status of research, development, and demonstration of concentrator solar cell technology. Solar concentrators discussed include the parabolic trough, linear focus Fresnel lens, point focus Fresnel lens, and the parabolic dish. Solar cells studied include silicon, GaAs, and AlGaAs. Research on multiple junction cells, combined photovoltaic/thermal collectors, back contact solar cells, and beam splitter modules is described. Concentrator solar cell demonstration programs are reported. Contractor status summaries are given for 33 US DOE concentrator solar cell contracts; a description of the project, project status, and key results to date is included. (WHK)

  18. Ground-water quality assessment of the central Oklahoma Aquifer, Oklahoma; project description

    Science.gov (United States)

    Christenson, S.C.; Parkhurst, D.L.

    1987-01-01

    In April 1986, the U.S. Geological Survey began a pilot program to assess the quality of the Nation's surface-water and ground-water resources. The program, known as the National Water-Quality Assessment (NAWQA) program, is designed to acquire and interpret information about a variety of water-quality issues. The Central Oklahoma aquifer project is one of three ground-water pilot projects that have been started. The NAWQA program also incudes four surface-water pilot projects. The Central Oklahoma aquifer project, as part of the pilot NAWQA program, will develop and test methods for performing assessments of ground-water quality. The objectives of the Central Oklahoma aquifer assessment are: (1) To investigate regional ground-water quality throughout the aquifer in the manner consistent with the other pilot ground-water projects, emphasizing the occurrence and distribution of potentially toxic substances in ground water, including trace elements, organic compounds, and radioactive constituents; (2) to describe relations between ground-water quality, land use, hydrogeology, and other pertinent factors; and (3) to provide a general description of the location, nature, and possible causes of selected prevalent water-quality problems within the study unit; and (4) to describe the potential for water-quality degradation of ground-water zones within the study unit. The Central Oklahoma aquifer, which includes in descending order the Garber Sandstone and Wellington Formation, the Chase Group, the Council Grove Group, the Admire Group, and overlying alluvium and terrace deposits, underlies about 3,000 square miles of central Oklahoma and is used extensively for municipal, industrial, commercial, and domestic water supplies. The aquifer was selected for study by the NAWQA program because it is a major source for water supplies in central Oklahoma and because it has several known or suspected water-quality problems. Known problems include concentrations of arsenic, chromium

  19. Managing a Solar Sensor Array Project: Analyzing Insolation & Motivation

    Science.gov (United States)

    2011-01-01

    as program manager. The graduate students were Jordan Henry , Zachary Johnson, and Nisha Nagarajan. Henry’s and Johnson’s contributions to the...original Gantt chart, so they needed to be refined into more specific tasks. The project manager needed to know which team members would be able to...and specialties, interviews were conducted to assess the refinements needed on the Gantt chart. The the original Gantt chart was then updated

  20. Trends in Downward Solar Radiation at the Surface over North America from Climate Model Projections and Implications for Solar Energy

    Directory of Open Access Journals (Sweden)

    Gerardo Andres Saenz

    2015-01-01

    Full Text Available The projected changes in the downward solar radiation at the surface over North America for late 21st century are deduced from global climate model simulations with greenhouse-gas (GHG forcing. A robust trend is found in winter over the United States, which exhibits a simple pattern of a decrease of sunlight over Northern USA. and an increase of sunlight over Southern USA. This structure was identified in both the seasonal mean and the mean climatology at different times of the day. It is broadly consistent with the known poleward shift of storm tracks in winter in climate model simulations with GHG forcing. The centennial trend of the downward shortwave radiation at the surface in Northern USA. is on the order of 10% of the climatological value for the January monthly mean, and slightly over 10% at the time when it is midday in the United States. This indicates a nonnegligible influence of the GHG forcing on solar energy in the long term. Nevertheless, when dividing the 10% by a century, in the near term, the impact of the GHG forcing is relatively minor such that the estimate of solar power potential using present-day climatology will remain useful in the coming decades.

  1. Plutonium immobilization project development and testing quality assurance program description - February 1999

    Energy Technology Data Exchange (ETDEWEB)

    MacLean, L M; Ziemba, J

    1999-02-01

    Lawrence Livermore National Laboratory Immobilization Development and Testing organization (LLNL ID and T) is a Participant in the Plutonium Immobilization Project (PIP). The LLNL D and T has lead responsibilities for form characterization and qualification, ceramic form development, process/equipment development with plutonium, and process systems testing and validation for both conversion and immobilization. This work must be performed in accordance with the graded approach of a Quality Assurance (QA) Program. A QA Program has been developed at LLNL to meet the requirements of the DOE/MD Quality Assurance Requirements. The LLNL QA Program consists of a Quality Assurance Program Description (QAPD) and Quality Implementing Procedures. These documents interface and are a subset of the overall PIP QA Program Documents. The PIP QA Program is described in the PIP ID and T QA Plan, PIP QAPD, and QA Procedures. Other Participant Organizations also must document and describe their PIP compliant QA Programs in a QAPD and implementing procedures. The purpose of this LLNL QAPD is to describe the organization, management processes, QA Controls for Grading, functional responsibilities, levels of authority, and interfaces for those managing, performing, and assessing the adequacy of work.

  2. Leadership, management and teamwork learning through an extra-curricular project for medical students: descriptive study.

    Science.gov (United States)

    Jorge, Maria Lucia da Silva Germano; Coelho, Izabel Cristina Meister; Paraizo, Mariana Martins; Paciornik, Ester Fogel

    2014-01-01

    Professionalism in medicine requires preparation for the globalized world. Our objective was to describe a project that introduces medical students to the community, hospital and laboratory activities, thereby allowing them to gain experience in people management, leadership and teamwork. Descriptive study of the process applied at a philanthropic medical school in Curitiba, Paraná. Inclusion of management and leadership practices as part of the medical degree program. The study groups consisted of fifteen students. After six months, any of the participants could be elected as a subcoordinator, with responsibility for managing tasks and representing the team in hospital departments and the community. The activities required increasing levels of responsibility. In medical schools, students' involvement in practical activities is often limited to observation. They are not required to take responsibilities or to interact with other students and stakeholders. However, they will become accountable, which thus has an adverse effect on all involved. The learning space described here aims to fill this gap by bringing students closer to the daily lives and experiences of healthcare professionals. Being a physician requires not only management and leadership, but also transferrable competencies, communication and critical thinking. These attributes can be acquired through experience of teamwork, under qualified supervision from teaching staff. Students are thus expected to develop skills to deal with and resolve conflicts, learn to share leadership, prepare others to help and replace them, adopt an approach based on mutual responsibility and discuss their performance.

  3. Description and modelling of the solar-hydrogen-biogas-fuel cell system in GlashusEtt

    Science.gov (United States)

    Hedström, L.; Wallmark, C.; Alvfors, P.; Rissanen, M.; Stridh, B.; Ekman, J.

    The need to reduce pollutant emissions and utilise the world's available energy resources more efficiently has led to increased attention towards e.g. fuel cells, but also to other alternative energy solutions. In order to further understand and evaluate the prerequisites for sustainable and energy-saving systems, ABB and Fortum have equipped an environmental information centre, located in Hammarby Sjöstad, Stockholm, Sweden, with an alternative energy system. The system is being used to demonstrate and evaluate how a system based on fuel cells and solar cells can function as a complement to existing electricity and heat production. The stationary energy system is situated on the top level of a three-floor glass building and is open to the public. The alternative energy system consists of a fuel cell system, a photovoltaic (PV) cell array, an electrolyser, hydrogen storage tanks, a biogas burner, dc/ac inverters, heat exchangers and an accumulator tank. The fuel cell system includes a reformer and a polymer electrolyte fuel cell (PEFC) with a maximum rated electrical output of 4 kW el and a maximum thermal output of 6.5 kW th. The fuel cell stack can be operated with reformed biogas, or directly using hydrogen produced by the electrolyser. The cell stack in the electrolyser consists of proton exchange membrane (PEM) cells. To evaluate different automatic control strategies for the system, a simplified dynamic model has been developed in MATLAB Simulink. The model based on measurement data taken from the actual system. The evaluation is based on demand curves, investment costs, electricity prices and irradiation. Evaluation criteria included in the model are electrical and total efficiencies as well as economic parameters.

  4. Solar runner: project of energetical saving; Corredor Solar: un proyecto demostrativo de ahorro energetico

    Energy Technology Data Exchange (ETDEWEB)

    Sirodia, M. A.; Valenzuela, M. A.; Gamez, J. A.

    2004-07-01

    In order to stimulate the conscience of the relation between the comfort and the development in balance with the nature and to obtain the World that we want, a Solar Runner, conformed in his first stage by three modules is constructed: Small house of power waste, Small house of power saving and a Small house of Calculation, directed mainly to the infantile population in scholastic age, basic education: primary and secondary, young between 10 and 15 years old and to the population in general, where the visitor can in situ obtain data on the electrical demand, electrical consumption, economic cost by electricity, heat insulation, thermal gain, polluting agents emitted by the electricity generation, efficient technology and a comfort without power waste. (Author)

  5. A marketable all-electric solar house. A report of a Solar Decathlon project

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na [School of Architecture, University of Illinois at Urbana-Champaign, 104 Temple Hoyne Buell Hall, 611 Lorado Taft Drive, Champaign, IL 61820 (United States); Esram, Trishan [Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, 335 Everitt Laboratory, 1406 West Green St., Urbana, IL 61801 (United States); Martinez, Luis A. [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 158 Mechanical Engineering Building, 1206 W. Green St., Urbana, IL 61801 (United States); McCulley, Michael T. [School of Architecture, University of Illinois at Urbana-Champaign, 107 Art E. Annex Studio 1, 1208 W. Peabody Drive, Urbana, IL 61820 (United States)

    2009-12-15

    This paper reports a design and building process of a net-zero-energy modular house, named ElementHouse, which was entered for the 2007 Solar Decathlon competition that was organized by the U.S. Department of Energy. This paper discusses the development of the ElementHouse from its initial concept to the actual construction, which integrated multi-disciplinary knowledge of architecture, mechanical engineering, and electrical engineering. By employing computer-aided simulation tools, several design approaches were developed to achieve the optimal balance among function, aesthetics, economy, and energy - a challenge in many sustainable building designs. A simplified energy model helped to form the building configuration at the preliminary design stage by showing how energy use is affected by various parameters, leading to optimization studies that provided design guidelines towards an energy-efficient building envelope and opening design. Energy modelling also estimated the annual energy use and electricity generation, as well as the costs associated with long-term operation of the house. The energy demand estimate and its daily power profile helped to design the photovoltaic (PV) system. The modular configuration of the building and its roof structure was then iteratively altered to accommodate the PV panels in such a way as to generate the most power and to facilitate interstate transportation of ElementHouse. With the progress of the design process, detailed energy simulation using EnergyPlus provided more accurate estimates of power use and generation and, coupled with daylighting simulation performed with Radiance, permitted finalizing the building envelope, opening, and electric lighting design. The building envelope embraced the passive and low energy philosophy to minimize the annual heating and cooling load and to optimize natural lighting. By illustrating the whole picture of ElementHouse design, this paper discusses a way of effectively designing and

  6. Status of Goldstone solar energy system study of the first Goldstone energy project

    Science.gov (United States)

    Lansing, F. L.

    1977-01-01

    The results reached by the DSN engineering section and private consultants in the review of the initial plan of the Golstone Energy Project are summarized. The main objectives were in the areas of energy conservation and the application of solar-driven systems for power and hydrogen generation. This summary will provide background data for management planning decisions both to the DSN engineering section and other organizations planning a similar program. The review showed that an add-on solar driven absorption refrigeration unit with its associated changes to the existing system was not cost-effective, having a payback period of 29 years. Similar economically unattractive results were found for both a solar-hydrogen and a wind-hydrogen generation plant. However, cutting the hydrogen generation linkage from this plant improved its economic feasibility.

  7. Northview Junior High solar energy demonstration project. Final report, 16 May 1974--16 May 1975

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, G.; Dib, A.

    1976-05-01

    This report covers a one-year test and evaluation of the Northview Junior High School Solar Energy Demonstration Project. The system provided about 5 percent of the school's energy requirements for the year. This energy was used for space heating, domestic water heating, and pool water heating for a total of 629,000,000 solar supplied Btu's. Average collector efficiency for the year was 44 percent. Operating costs were less than 5 percent of the value of the collected energy. Solar insolation data and system performance data are presented for the various operating modes. Results and conclusions indicate that the supplemental heating of large-scale buildings is feasible and economical. An optimum performance requires a careful matching of load, collectors, and distribution system.

  8. Leadership, management and teamwork learning through an extra-curricular project for medical students: descriptive study

    Directory of Open Access Journals (Sweden)

    Maria Lucia da Silva Germano Jorge

    Full Text Available CONTEXT AND OBJECTIVE: Professionalism in medicine requires preparation for the globalized world. Our objective was to describe a project that introduces medical students to the community, hospital and laboratory activities, thereby allowing them to gain experience in people management, leadership and teamwork.DESIGN AND SETTING: Descriptive study of the process applied at a philanthropic medical school in Curitiba, Paraná.METHOD: Inclusion of management and leadership practices as part of the medical degree program.RESULTS: The study groups consisted of fifteen students. After six months, any of the participants could be elected as a subcoordinator, with responsibility for managing tasks and representing the team in hospital departments and the community. The activities required increasing levels of responsibility. In medical schools, students' involvement in practical activities is often limited to observation. They are not required to take responsibilities or to interact with other students and stakeholders. However, they will become accountable, which thus has an adverse effect on all involved. The learning space described here aims to fill this gap by bringing students closer to the daily lives and experiences of healthcare professionals.CONCLUSION: Being a physician requires not only management and leadership, but also transferrable competencies, communication and critical thinking. These attributes can be acquired through experience of teamwork, under qualified supervision from teaching staff. Students are thus expected to develop skills to deal with and resolve conflicts, learn to share leadership, prepare others to help and replace them, adopt an approach based on mutual responsibility and discuss their performance.

  9. Passive solar in Milton Keynes, England. A description of some of the more numerical aspects of the design of an estate of low energy houses

    Science.gov (United States)

    Everett, R.

    1980-07-01

    The numerical aspects of the design of low energy consumption houses using passive solar energy collection and high levels of insulation are described. Two housing energy conservation projects were begun, one involving the construction of 177 low energy houses on a cost-effective basis, and the other involving the detailed monitoring of eight highly insulated passive solar houses. Both experimental data and theoretical analysis are presented, and the relative effectiveness of the various design alternatives are discussed.

  10. Projects for the utilization of solar energy. Projekte zur Nutzung der Sonnenenergie

    Energy Technology Data Exchange (ETDEWEB)

    Gutheil, J.; Wilms, N.

    1991-01-01

    From October 1986 to March 1987, at the secondary school Max-Beckmann the following topics have been elaborated in the scope of an overall project 'practical utilization of solar energy': Construction of a parabolic mirror; installation of solar cells for the direct production of electric power and construction of different types of plate collectors for the production of hot water. The following main emphasis has been put on all partial projects: Planning and performance of the construction of the objects; measurements on the efficiency; practical applications of the objects (for example hot water heating, charge of accumulators for electric boates); reasonable integration of the objects into the school biotope and - public presentation of the results. (orig./BWI).

  11. The SNO+ Scintillator Purification Plant and Projected Sensitivity to Solar Neutrinos in the Pure Scintillator Phase

    Science.gov (United States)

    Pershing, Teal; SNO+ Collaboration

    2016-03-01

    The SNO+ detector is a neutrino and neutrinoless double-beta decay experiment utilizing the renovated SNO detector. In the second phase of operation, the SNO+ detector will contain 780 tons of organic liquid scintillator composed of 2 g/L 2,5-diphenyloxazole (PPO) in linear alkylbenzene (LAB). In this phase, SNO+ will strive to detect solar neutrinos in the sub-MeV range, including CNO production neutrinos and pp production neutrinos. To achieve the necessary detector sensitivity, a four-part scintillator purification plant has been constructed in SNOLAB for the removal of ionic and radioactive impurities. We present an overview of the SNO+ scintillator purification plant stages, including distillation, water extraction, gas stripping, and metal scavenger columns. We also give the projected SNO+ sensitivities to various solar-produced neutrinos based on the scintillator plant's projected purification efficiency.

  12. Solar particle radiation storms forecasting and analysis the HESPERIA HORIZON 2020 project and beyond

    CERN Document Server

    Crosby, Norma

    2018-01-01

    Solar energetic particles (SEPs) emitted from the Sun are a major space weather hazard motivating the development of predictive capabilities. This book presents the results and findings of the HESPERIA (High Energy Solar Particle Events forecasting and Analysis) project of the EU HORIZON 2020 programme. It discusses the forecasting operational tools developed within the project, and presents progress to SEP research contributed by HESPERIA both from the observational as well as the SEP modelling perspective. Using multi-frequency observational data and simulations HESPERIA investigated the chain of processes from particle acceleration in the corona, particle transport in the magnetically complex corona and interplanetary space, to the detection near 1 AU. The book also elaborates on the unique software that has been constructed for inverting observations of relativistic SEPs to physical parameters that can be compared with spac e-borne measurements at lower energies. Introductory and pedagogical material incl...

  13. Solar project's developer and user at odds over delays

    Energy Technology Data Exchange (ETDEWEB)

    Maggs, J.

    1985-10-21

    New York State is preparing model contracts for third-party financing agreements designed to protect users from delays on installation and start-up of equipment after a project it helped put together for a solar heating system in a residence for the elderly has taken over two years without agreement on whether or not it is operational. The project was initially delayed over a year due to difficulty in obtaining financing because the estimated revenue was comparatively small. The financing was finally obtained in a package with larger, more lucrative installations of a cogeneration and other solar heating systems at other sites. The main lesson learned was that the contract should protect against delays between signing and installation.

  14. Proceedings of the flat-plate solar array project research forum on photovoltaic metallization systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-11-15

    A Photovoltaic Metallization Research Forum, under the sponsorship of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project and the US Department of Energy, was held March 16-18, 1983 at Pine Mountain, Georgia. The Forum consisted of five sessions, covering (1) the current status of metallization systems, (2) system design, (3) thick-film metallization, (4) advanced techniques and (5) future metallization challenges. Twenty-three papers were presented.

  15. The Sun Funnel: A Do-It-Yourself Projection Device for Safe Solar Viewing by Groups

    Science.gov (United States)

    Fienberg, R. T.; Bueter, C.; Mayo, L. A.

    2012-08-01

    Virtually every commercial telescope comes with a warning not to point it at the Sun, since doing so could not only damage the instrument but also injure the observer. Yet the Sun is typically the only astronomical object visible in the daytime, and even in white light it offers much to see in a telescope: sunspots and limb darkening, the partial phases of solar eclipses, transits of Mercury and Venus, and even transits of the International Space Station. Teachers, planetarians, and other science educators who wish to share these phenomena with their students or visitors face a challenge: how to safely show a magnified image of the Sun to many people at once. Using aperture filters on telescopes is fine if you have lots of telescopes, but if you have only a few telescopes, or perhaps only one, the result is long lines at the eyepiece. One inexpensive solution is solar projection, i.e., projecting an image from the telescope onto a wall or screen. But this technique is fraught with danger, as there is always the possibility that someone will look into the bright beam of sunlight streaming from the eyepiece and risk serious eye injury. Here we describe a novel solar-projection device, the Sun Funnel, that fits in a telescope focuser in lieu of a regular eyepiece. It is quick and easy to build using inexpensive, readily available supplies and simple household tools. The Sun Funnel completely encloses the sunbeam coming from the telescope and forms a clear solar image on a rear-projection screen. With this device, many people can simultaneously and safely enjoy a telescopic view of the Sun.

  16. Fort Hood Solar Total Energy Project. Volume IV. Project Management Plan. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1979-01-01

    The Project Management Plan presented is designed to implement the definitive design phase of this project by establishing the organization, tasks, schedules, and controls to assure the accomplishment of project objectives within time and budgetary constraints. Specifically, the plan presents a functional organization composed of a team of personnel with proven experience and capability; clear and concise methods for evaluation and control of project activities and costs; and a set of procedures that provides a means for sound and timely decisions and actions relative to project tasks and milestones. Since a significant portion of the overall design effort is to be performed by a subcontractor, Westinghouse Electric Corporation, this management plan, in conjunction with subcontract provisions, establishes a sound base for evaluation, control and coordination of all activities associated with their respective tasks. (WHK)

  17. Craft-Joule Project: Stagnation proof transparently insulated flat plate solar collector (static)

    Energy Technology Data Exchange (ETDEWEB)

    Oliva, A; Cadafalch, J; Perez-Segarra, C.D. [Universitat Politecnica de Catalunya, Barcelona (Spain)] (and others)

    2000-07-01

    The STATIC (STAgnation proof Transparently Insulated flat plate Solar Collector) project is a Craft-Joule Project within the framework of the Non Nuclear Energy Programme Joule III coordinated by the Centre Technologic de Transferencia de Calor (CTTC). The core group of SMEs involved in the project has its main economical activity in the field of solar thermal systems at low temperature level (domestic hot water, solar heating, etc.). Beyond this, a large application potential exists for solar heating at medium temperature level (from 80 to 160 Celsius degrees) : industrial process heat, solar cooling and air conditioning, solar drying , distillation and desalination. Three of the four SME proposers are located in Southern Europe and in the Caribean, where a continuos increase of the demand for air conditioning and cooling has been demonstrated in the last years. The recent development of flat plate solar collectors with honeycomb-type transparent insulation cover has shown that this type of collectors can become a low cost alternative to evacuated tube and high concentrating CPC collectors in the medium temperature range from 80 to 160 Celsius degrees. With the expected reduction of collector cost, that forms 30%-50% of total system cost, a decisive break-through of solar thermal systems using heat in the medium temperature range can be achieved. The feasibility and good performance of these solar collectors has been proved in several prototypes. Nevertheless, up to now no commercial products are available. In order to reach this, the following developments of new concepts are necessary and are being carried out within this project: solution of the problem of overheating: development of collector versions for different working temperatures: optimization of the design with the support of high level numerical simulation. Several prototypes of the new solar collectors are being tested. System tests will also be carried or for two test arrays of optimized collector

  18. Sensitivity of Utility-Scale Solar Deployment Projections in the SunShot Vision Study to Market and Performance Assumptions

    Energy Technology Data Exchange (ETDEWEB)

    Eurek, K.; Denholm, P.; Margolis, R.; Mowers, M.

    2013-04-01

    The SunShot Vision Study explored the potential growth of solar markets if solar prices decreased by about 75% from 2010 to 2020. The ReEDS model was used to simulate utility PV and CSP deployment for this present study, based on several market and performance assumptions - electricity demand, natural gas prices, coal retirements, cost and performance of non-solar renewable technologies, PV resource variability, distributed PV deployment, and solar market supply growth - in addition to the SunShot solar price projections. This study finds that utility-scale solar deployment is highly sensitive to solar prices. Other factors can have significant impacts, particularly electricity demand and natural gas prices.

  19. 77 FR 31037 - Notice of Segregation of Public Lands for the Proposed Hyder Valley Solar Energy Project in...

    Science.gov (United States)

    2012-05-24

    .... LVRWA09A2370; AZA34425] Notice of Segregation of Public Lands for the Proposed Hyder Valley Solar Energy... Valley Solar Energy Project in Maricopa County, Arizona. DATES: Effective Date: This segregation is..., subject to valid existing rights. This 2-year segregation period commences on May 24, 2012. The public...

  20. High Performance Computing Application: Solar Dynamo Model Project II, Corona and Heliosphere Component Initialization, Integration and Validation

    Science.gov (United States)

    2015-06-24

    AFRL-RD-PS- TR-2015-0028 AFRL-RD-PS- TR-2015-0028 HIGH PERFORMANCE COMPUTING APPLICATION: SOLAR DYNAMO MODEL PROJECT II; CORONA AND HELIOSPHERE...Dynamo Model Project II, Corona and Heliosphere Component Initialization, Integration and Validation 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...Approved for public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT This report reviews the status of current day solar corona and

  1. Data Description Exchange Services for Heterogeneous Vehicle and Spaceport Control and Monitor Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — CCT proposes an advanced data description exchange approach for space/spaceport systems that will provide a generic platform independent software capability for...

  2. Solar photovoltaic energy in Brazil: pilot projects or a great market?; Energia solar fotovoltaica no Brasil: projetos pilotos ou um grande mercado?

    Energy Technology Data Exchange (ETDEWEB)

    Abade, Katia A. [Sao Paulo Univ., SP (Brazil). Escola Politecnica; Moreira, Jose G.S. [Sao Paulo Univ., SP (Brazil). Inst. de Eletrotecnica e Energia

    1996-12-31

    The work aims to search the characteristics of the photovoltaic projects in Brazil such as: power; costs (individual costs and region averages); amount of served population and projects` stage of implementation. According to the research it was verified that three types of solar energy pilots projects have been developed, they are: isolated generation, measurements, and centralized cogeneration. It was concluded that the investments in photovoltaic solar energy projects are small compared to the potentials of the Brazilian insolation and consumer market. The greatest amount of projects are pilot type which main objectives are to develop studies about the theme. In order to increase the use of photovoltaic energy in Brazil, it is necessary political, technical and financial support 16 refs., 2 tabs.; e-mail: kabade at lme.poli.usp.br; gui at iee.usp.br

  3. A review of community-based solar home system projects in the Philippines

    Directory of Open Access Journals (Sweden)

    Macabebe Erees Queen B.

    2016-01-01

    Full Text Available Solar Home Systems (SHS are easy to deploy in island and in remote communities where grid connection is costly. However, issues related to maintenance of these systems emerge after they are deployed because of the remoteness and inaccessibility of the communities. This study looked into community-based programs in the Philippines and investigated the following: (1 social preparation, (2 role of the community in the project, and (3 sustainability of the program. In this paper, three communities under two government programs offering SHS are presented. These programs are the Solar Power Technology Support (SPOTS program of the Department of Agrarian Reform (DAR and the Household Electrification Program (HEP of the Department of Energy (DOE. A focused group discussion and key informant interviews were conducted in two communities in Bukidnon province and in a community in Kalinga to obtain information from the project beneficiaries and SHS users on the preparation, implementation and maintenance of the projects. The results revealed that emphasis on the economic value of the technology, proper training of the locals on the technical and management aspects of the project, as well as the establishment of a supply chain for replacement parts are crucial factors for the sustainability of the programs.

  4. Comparative research and demonstration project on the utilization of solar energy for the heating of energy-conserving greenhouses

    Energy Technology Data Exchange (ETDEWEB)

    Eggers, H.

    1981-01-01

    The solar greenhouses investigated in this research project differ with regard to their respective plant growth rate. Experiments with Dieffenbachia, Ficus benjamina, Ficus australis and Saintpaulia ionantha have shown that the solar greenhouse, operated as an air collector with gravel storage, shows better growth results even in comparison with the reference greenhouse. The flat plate collector solar greenhouses and especially the one using blind collectors have led to delays in growth during periods of weak insolation. In the solar greenhouse using a parabolic reflector which is easily controlled by its own system similar results as in the reference greenhouse could be achieved.

  5. Renewable Resources: a national catalog of model projects. Volume 2. Mid-American Solar Energy Complex Region

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Mid-American Solar Energy Complex Region. (WHK)

  6. Implementing Solar PV Projects on Historic Buildings and in Historic Districts

    Energy Technology Data Exchange (ETDEWEB)

    Kandt, A.; Hotchkiss, E.; Walker, A.; Buddenborg, J; Lindberg, J.

    2011-09-01

    Many municipalities, particularly in older communities of the United States, have a large amount of historic buildings and districts. In addition to preserving these historic assets, many municipalities have goals or legislative requirements to procure a certain amount of energy from renewable sources and to become more efficient in their energy use; often, these requirements do not exempt historic buildings. This paper details findings from a workshop held in Denver, Colorado, in June 2010 that brought together stakeholders from both the solar and historic preservation industries. Based on these findings, this paper identifies challenges and recommends solutions for developing solar photovoltaic (PV) projects on historic buildings and in historic districts in such a way as to not affect the characteristics that make a building eligible for historic status.

  7. Technical data for concentrated solar power plants in operation, under construction and in project

    Directory of Open Access Journals (Sweden)

    Ugo Pelay

    2017-08-01

    Full Text Available This article presents technical data for concentrated solar power (CSP plants in operation, under construction and in project all over the world in the form of tables. These tables provide information about plants (e.g., name of the CSP plant, country of construction, owner of the plant, aim of the plant and their technical characteristics (e.g., CSP technology, solar power, area of the plant, presence and type of hybridization system, electricity cost, presence and type of TES, power cycle fluid, heat transfer fluid, operating temperature, operating pressure, type of turbine, type and duration of storage, etc.. Further interpretation of the data and discussions on the current state-of-the-art and future trends of CSP can be found in the associated research article (Pelay et al., 2017 [1].

  8. 'Solurban' project - Solar utilisation potential of urban sites

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, D.; Scartezzini, J.-L.; Montavon, M. [Swiss Federal Institute of Technology (EPFL), Laboratoire d' Energie Solaire et de Physique du Batiment (LESO-PB), Lausanne (Switzerland); Compagnon, R. [Ecole d' ingenieurs et d' architectes de Fribourg (EIAF), University of Applied Sciences of Western Switzerland (HES-SO), Fribourg (Switzerland)

    2005-07-01

    This report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined three urban locations in Switzerland with respect to their potentials for using solar energy and daylight to reduce energy demands in the lighting, heating and hot-water generation areas. The three urban areas examined included the Matthaeus district in Basle with its older residential apartment buildings, the Bellevaux residential district of Lausanne and the Meyrin district in Geneva - a nineteen-sixties satellite town. The calculation methodology and the three-dimensional digital models used are discussed. The results, including radiation availability and sky-access are discussed. Appropriate active and passive solar technologies are reviewed.

  9. Technical data for concentrated solar power plants in operation, under construction and in project.

    Science.gov (United States)

    Pelay, Ugo; Luo, Lingai; Fan, Yilin; Stitou, Driss; Rood, Mark

    2017-08-01

    This article presents technical data for concentrated solar power (CSP) plants in operation, under construction and in project all over the world in the form of tables. These tables provide information about plants (e.g., name of the CSP plant, country of construction, owner of the plant, aim of the plant) and their technical characteristics (e.g., CSP technology, solar power, area of the plant, presence and type of hybridization system, electricity cost, presence and type of TES, power cycle fluid, heat transfer fluid, operating temperature, operating pressure, type of turbine, type and duration of storage, etc.). Further interpretation of the data and discussions on the current state-of-the-art and future trends of CSP can be found in the associated research article (Pelay et al., 2017) [1].

  10. [Solar ultraviolet radiation risk in outdoor workers: a specific project of Tuscany Region (Italy)].

    Science.gov (United States)

    Miligi, Lucia; Benvenuti, Alessandra; Legittimo, Patrizia; Badiali, Anna Maria; Cacciarini, Valentina; Chiarugi, Alessandra; Crocetti, Emanuele; Alberghini Maltoni, Simona; Pinto, Iole; Zipoli, Gaetano; Grifoni, Daniele; Carnevale, Francesco; Pimpinelli, Nicola; Cherubini Di Simplicio, Francesca; Poggiali, Sara; Sartorelli, Pietro; Sirna, Riccardo; Amati, Rodolfo; Centi, Letizia; Festa, Gianluca; Fiumalbi, Carla; Fedi, Aldo; Giglioli, Senio; Mancini, Rossana; Panzone, Tina; Petrioli, Giuseppe; Trombetti, Alessandra; Volpi, Daniela

    2013-01-01

    The aims of Tuscany Regional project were: to study the sun protection attitude of outdoor workers; to measure solar ultraviolet (UV) exposure in work environment; to describe the frequency of photoaging, precancerous lesions, and skin cancers in outdoor workers; to collect information on solar ultraviolet radiation exposure from incident cases of Non-Melanoma Skin Cancer (NMSC) recruited from Tuscany Cancer Registry. Outdoor workers completed a questionnaire devoted to collect information on sun protection attitudes during a typical summer working week. Environmental and personal measurements were carried out. Expert dermatologists examined outdoor workers to assess the frequency of photoaging, precancerous lesions, and skin cancer. A structured questionnaire was mailed to incident cases of NMSC. Information were collected on personal habits and working history, focusing on solar ultraviolet radiation exposure. Agriculture, construction, quarrying and fishing activities were considered: 292 employees responded to questions about the type of clothing used in the morning and in the afternoon,while working outdoors; 637 outdoor workers underwent skin examination. We contacted 743 cases of NMSC occurred in 2004; 498 subjects accepted to participate in this study. The clothing worn by surveyed subjects was often inadequate compared to the high level of exposure to UV. The skin examination of 637 outdoor workers highlighted 2 melanomas, 7 epitheliomas and 35 actinic keratoses. Among the 498 cases of NMSC, 135 (27%) were diagnosed in outdoor workers. Most represented economic activity sectors were: agriculture, construction, transport, sports. The characterization of outside workers revealed unsatisfactory sun protection behaviours. Moreover, previously undetected skin cancers were diagnosed. The study on MNSC confirms the complexity of studying the exposure to UV radiation. The Tuscany Regional project provided useful information on the risk of solar ultraviolet

  11. On the Projective Description of Weighted (LF-Spaces of Continuous Functions

    Directory of Open Access Journals (Sweden)

    Catherine V. Komarchuk

    2014-01-01

    Full Text Available We solve the problem of the topological or algebraic description of countable inductive limits of weighted Fréchet spaces of continuous functions on a cone. This problem is investigated for two families of weights defined by positively homogeneous functions. Weights of this form play the important role in Fourier analysis.

  12. Low-Cost Solar Array Project. Progress report 12, January-April 1979 and proceedings of the 12th Project Integration Meeting

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This report describes progress made by the Low-Cost Solar Array Project during the period January through April 1979. It includes reports on project analysis and integration; technology development in silicon material, large-area sheet silicon, and encapsulation; production process and equipment development; engineering and operations, and a discussion of the steps taken to integrate these efforts. It includes a report on, and copies of viewgraphs presented at the Project Integration Meeting held April 4-5, 1979.

  13. Low-Cost Solar Array Project. Progress report 14, August 1979-December 1979 and proceedings of the 14th Project Integration Meeting

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Progress made by the Low-Cost Solar Array Project during the period August through November 1979, is described. Progress on project analysis and integration; technology development in silicon material, large-area sheet silicon, and encapsulation; production process and equipment development; engineering, and operations, and the steps taken to integrate these efforts are detailed. A report on the Project Integration Meeting held December 5-6, 1979, including copies of the visual materials used, is presented.

  14. Solar fuels production as a sustainable alternative for substituting fossil fuels: COSOLπ project

    Science.gov (United States)

    Hernando Romero-Paredes, R.; Alvarado-Gil, Juan José; Arancibia-Bulnes, Camilo Alberto; Ramos-Sánchez, Víctor Hugo; Villafán-Vidales, Heidi Isabel; Espinosa-Paredes, Gilberto; Abanades, Stéphane

    2017-06-01

    This article presents, in summary form, the characteristics of COSOLπ development project and some of the results obtained to date. The benefits of the work of this project will include the generation of a not polluting transportable energy feedstock from a free, abundant and available primary energy source, in an efficient method with no greenhouse gas emission. This will help to ensure energy surety to a future transportation/energy infrastructure, without any fuel import. Further technological development of thermochemical production of clean fuels, together with solar reactors and also with the possibility of determining the optical and thermal properties of the materials involved a milestone in the search for new processes for industrialization. With the above in mind, important national academic institutions: UAM, UNAM, CINVESTAV, UACH, UNISON among others, have been promoting research in solar energy technologies. The Goals and objectives are to conduct research and technological development driving high-temperature thermochemical processes using concentrated solar radiation as thermal energy source for the future sustainable development of industrial processes. It focuses on the production of clean fuels such as H2, syngas, biofuels, without excluding the re-value of materials used in the industry. This project conducts theoretical and experimental studies for the identification, characterization, and optimization of the most promising thermochemical cycles, and for the thorough investigation of the reactive chemical systems. It applies material science and nano-engineering to improve chemicals properties and stability upon cycling. The characterization of materials will serve to measure the chemical composition and purity (MOX fraction-1) of each of the samples. The characterizations also focus on the solid particle morphology (shape, size, state of aggregation, homogeneity, specific surface) images obtained from SEM / TEM and BET measurements. Likewise

  15. Management Innovations in Higher Education: A Descriptive Study of Information Technology Managers' Perceptions Regarding the Use and Value of Project Management in Institutions of Higher Education

    Science.gov (United States)

    Durbin, Michael P.

    2013-01-01

    This study examined the perspectives of IT managers working in colleges and universities regarding their use of and value for project management. Descriptive and inferential analyses were used to understand individual innovativeness, innovation characteristics of project management, and the perceived use of and value for project management best…

  16. Idaho National Laboratory Ten-Year Site Plan Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Not Listed

    2012-03-01

    This document describes the currently active and proposed infrastructure projects listed in Appendix B of the Idaho National Laboratory 2013-2022 Ten Year Site Plan (DOE/ID-11449). It was produced in accordance with Contract Data Requirements List I.06. The projects delineated in this document support infrastructure needs at INL's Research and Education Campus, Materials and Fuels Complex, Advanced Test Reactor Complex and the greater site-wide area. The projects provide critical infrastructure needed to meet current and future INL opereational and research needs. Execution of these projects will restore, rebuild, and revitalize INL's physical infrastructure; enhance program execution, and make a significant contribution toward reducing complex-wide deferred maintenance.

  17. Spent nuclear fuel project cold vacuum drying facility vacuum and purge system design description

    Energy Technology Data Exchange (ETDEWEB)

    IRWIN, J.J.

    1998-11-30

    This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Vacuum and Purge System (VPS) . The SDD was developed in conjunction with HNF-SD-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-002, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the VPS equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

  18. Final Report. Forest County Potawatomi Community, Community-Scale Solar Project

    Energy Technology Data Exchange (ETDEWEB)

    Drescher, Sara M. [Forest County Potawatomi Community, Crandon, WI (United States)

    2016-03-31

    The Forest County Potawatomi Community (“FCPC” or “Tribe”) is a federally recognized Indian tribe with a membership of over 1400. The Tribe has a reservation in Forest County, Wisconsin, and also holds tribal trust and fee lands in Milwaukee, Oconto, and Fond du Lac Counties, Wisconsin. The Tribe has developed the long-term goal of becoming energy independent using renewable resources. In order to meet this goal, the Tribe has taken a number of important steps including energy audits leading to efficiency measures, installation of solar PV, the construction of a biodigester and the purchase of Renewable Energy Certificates to offset its current energy use. To further its energy independence goals, FCPC submitted an application to the Department of Energy (“DOE”) and was awarded a Community-Scale Clean Energy Projects in Indian Country grant, under funding opportunity DE-FOA-0000852. The Tribe, in collaboration with Pewaukee, Wisconsin based SunVest Solar Inc. (SunVest), installed approximately 922.95 kW of solar PV systems at fifteen tribal facilities in Milwaukee and Forest Counties. The individual installations ranged from 9.0 kW to 447.64 kW and will displace between 16.9% to in some cases in excess of 90% of each building’s energy needs.

  19. Prefeasibility Study of a Solar Power Plant Project and Optimization of a Meteorological Station Performance

    Directory of Open Access Journals (Sweden)

    W. Derouich

    2014-02-01

    Full Text Available A prefeasibility study of a solar power plant project was carried out in order to study and search the best location to install a concentrated solar power plant according to a tender with the Algerian electricity company “SPE” following a specific criteria and methodology in order to obtain a site with a maximum possible irradiation along with other economic constraints. Normally, eleven years of solar irradiation data from an on-ground weather station is needed for site assessment, such data are not available, hence the typical meteorological year irradiation based on satellite imagery results is needed in order to have the accurate value, therefore we can give the right evaluation for the site candidate. Additionally, an analysis of a weather measurement station was carried out to ensure the proper functioning of the weather data reception and analysis processes, and thus to optimize the algorithm of a data logger in order to get the right measurement with a minimum error. The correction algorithm was developed by weather scientists and was added to the data logger main program.

  20. Lobatto-Milstein Numerical Method in Application of Uncertainty Investment of Solar Power Projects

    Directory of Open Access Journals (Sweden)

    Mahmoud A. Eissa

    2017-01-01

    Full Text Available Recently, there has been a growing interest in the production of electricity from renewable energy sources (RES. The RES investment is characterized by uncertainty, which is long-term, costly and depends on feed-in tariff and support schemes. In this paper, we address the real option valuation (ROV of a solar power plant investment. The real option framework is investigated. This framework considers the renewable certificate price and, further, the cost of delay between establishing and operating the solar power plant. The optimal time of launching the project and assessing the value of the deferred option are discussed. The new three-stage numerical methods are constructed, the Lobatto3C-Milstein (L3CM methods. The numerical methods are integrated with the concept of Black–Scholes option pricing theory and applied in option valuation for solar energy investment with uncertainty. The numerical results of the L3CM, finite difference and Monte Carlo methods are compared to show the efficiency of our methods. Our dataset refers to the Arab Republic of Egypt.

  1. Using spectroscopy and interactive games to teach Solar System science: A decade of NASA's Project SPECTRA!

    Science.gov (United States)

    Wood, E. L.

    2015-12-01

    NASA's Project SPECTRA! has been in existance for nearly a decade. It highlights mission data and uses interactive games to engage students in middle and high school grades. Students learn about the electromagnetic spectrum and how we use this information to glean information about Solar System objects, and their atmospheres and climates. The program uses data from Cassini, Mars orbiters and rovers (most recently MAVEN), Venus Express, and several Earth orbiters to bring concepts of planetary comparison into focus. Using both traditional paper and pencil lessons and Flash and app based games, students are asked to conduct open ended research, make sense of the data they are presented with, and make scientific observations and hypothesis based upon their explorations. This talk will demonstrate how games are used to engage students in this process. Project SPECTRA! is a NASA product available through NASAWavelength.org, and is aligned to the Next Generation Science Standards (NGSS).

  2. Summary of reports on 1979 result of Sunshine Project. Solar energy; 1979 nendo sunshine keikaku seika hokokusho gaiyoshu. Taiyo energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-04-01

    This report is a compilation of all outlines of the results concerning 'solar energy' for which R and D was carried out as a part of Sunshine Project in fiscal 1979. The research subjects (items of the studies) are written below. 1. Solar energy system (measurement of spectral irradiance, utilization system, and meteorological investigation); 2. Solar thermal power generation system; 3. Photovoltaic power generation system (basic research on solar cells, silicon vertical ribbon crystal, silicon horizontal ribbon crystal, particle non-acceleration growth type thin film silicon crystal, particle acceleration growth type thin film silicon crystal, new type solar cells, secondary to quaternary compound semiconductor solar cells, and photovoltaic power generation system); 4. Solar cooling, heating and hot water supply system (evaluation system, newly-built private residential system, existing private residential system, multiple dwelling system, large building system, synthetic resin materials, glass based materials, and metallic materials); 5. Solar energy new utilization method (new power generation system and materials); 6. R and D on solar thermal power generation plant (R and D on pilot plant, experimental research for developing plant on curved surface converging method, and experimental research for developing plant on tower converging method). (NEDO)

  3. Spent Nuclear Fuel Project technical baseline document. Fiscal year 1995: Volume 1, Baseline description

    Energy Technology Data Exchange (ETDEWEB)

    Womack, J.C. [Westinghouse Hanford Co., Richland, WA (United States); Cramond, R. [TRW (United States); Paedon, R.J. [SAIC (United States)] [and others

    1995-03-13

    This document is a revision to WHC-SD-SNF-SD-002, and is issued to support the individual projects that make up the Spent Nuclear Fuel Project in the lower-tier functions, requirements, interfaces, and technical baseline items. It presents results of engineering analyses since Sept. 1994. The mission of the SNFP on the Hanford site is to provide safety, economic, environmentally sound management of Hanford SNF in a manner that stages it to final disposition. This particularly involves K Basin fuel, although other SNF is involved also.

  4. A new method for predicting the solar heat gain of complex fenestration systems: II, Detailed description of the matrix layer calculation

    Energy Technology Data Exchange (ETDEWEB)

    Klems, J.H.

    1993-10-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. A preceding paper outlined the method and provided the physical derivation of the calculation. In this second of a series of related papers the detailed development of the matrix layer calculation is presented.

  5. Projecting and implementation of large-scale solar thermal power systems; Projektierung und Realisierung von groesseren solarthermischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Guigas, Michael [EGS-plan, Stuttgart (Germany)

    2009-07-01

    Experience with industrial-scale solar systems integrated in central heating systems, water heating sytems and district heating grids has shown that the technology as a rule will function as projected. Given certain technical and organisational boundary conditions, industrial-scale solar systems can be constructed at low cost and with high solar gain. If the efficiency achieved is insufficient, this may be due mostly to the combination with conventional heating systems, with too high return temperatures in the distribution grids. Solar systems with a storage volume for several days and a coverage of max. 35% are a cost-efficient alternative to systems with long-term storage. By integrating a heat pump, the coverage can be increased to more than 40 % or max. 50 %. Large-scale solar systems do not require much maintenance. However, detailed monitoring is recommended during the first years of operation of the plant. (orig.)

  6. Utility-Scale Solar 2015: An Empirical Analysis of Project Cost, Performance, and Pricing Trends in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Seel, Joachim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2016-08-17

    The utility-scale solar sector—defined here to include any ground-mounted photovoltaic (“PV”), concentrating photovoltaic (“CPV”), or concentrating solar power (“CSP”) project that is larger than 5 MWAC in capacity—has led the overall U.S. solar market in terms of installed capacity since 2012. It is expected to maintain its market-leading position for at least another five years, driven in part by December 2015’s three-year extension of the 30% federal investment tax credit (“ITC”) through 2019 (coupled with a favorable switch to a “start construction” rather than a “placed in service” eligibility requirement, and a gradual phase down of the credit to 10% by 2022). In fact, in 2016 alone, the utility-scale sector is projected to install more than twice as much new capacity as it ever has previously in a single year. This unprecedented boom makes it difficult, yet more important than ever, to stay abreast of the latest utility-scale market developments and trends. This report—the fourth edition in an ongoing annual series—is intended to help meet this need, by providing in-depth, annually updated, data-driven analysis of the utility-scale solar project fleet in the United States. Drawing on empirical project-level data from a wide range of sources, this report analyzes not just installed project costs or prices—i.e., the traditional realm of most solar economic analyses—but also operating costs, capacity factors, and power purchase agreement (“PPA”) prices from a large sample of utility-scale solar projects throughout the United States. Given its current dominance in the market, utility-scale PV also dominates much of this report, though data from CPV and CSP projects are also presented where appropriate.

  7. Description of historical crop calendar data bases developed to support foreign commodity production forecasting project experiments

    Science.gov (United States)

    West, W. L., III (Principal Investigator)

    1981-01-01

    The content, format, and storage of data bases developed for the Foreign Commodity Production Forecasting project and used to produce normal crop calendars are described. In addition, the data bases may be used for agricultural meteorology, modeling of stage sequences and planting dates, and as indicators of possible drought and famine.

  8. 49 CFR Appendix A to Part 611 - Description of Measures Used for Project Evaluation.

    Science.gov (United States)

    2010-10-01

    ... analysis must be the same outside the corridor for which the new start project is proposed. Further...,” reflects the importance of transit-supportive local land use and related conditions and policies as an... to implement land use policies; (7) The performance of land use policies; and (8) Existing and...

  9. Pienter project: description of the serum bank, with information on participants gleaned from questionnaires

    NARCIS (Netherlands)

    Hof S van den; Melker HE de; Suijkerbuijk AWM; Conyn-van Spaendonck MAE; CIE

    1997-01-01

    The RIVM's so-called Pienter project, carried out from October 1995 to December 1996, was aimed at establishing a serum bank of a representative sample of the Dutch population to facilitate sero-epidemiological studies , including the evaluation of the National Immunisation Programme (NIP). In

  10. Jerome and Rohwer Relocation Centers: A Description of a Project of Selected Photographs of Camp Life.

    Science.gov (United States)

    Friedlander, E. Jay

    Photojournalism research includes the resurrection and editing of historic, seldom-seen photographs. A sample of this kind of research is a project at the University of Arkansas at Little Rock that involves selecting photographic material from a little-seen National Archives collection of pictures from the files of the War Relocation Authority, an…

  11. ARCADE: Description of the project and setup of the Lidar/AMT system

    Directory of Open Access Journals (Sweden)

    Valore L.

    2015-01-01

    Full Text Available The ARCADE (Atmospheric Research for Climate and Astroparticle DEtection project is a 3 years project funded by MIUR, that aims to study the aerosol attenuation of UV light in atmosphere using multiple instruments and techniques, as those commonly used in the cosmic rays community: elastic Lidar, Raman Lidar, side-scattering measurements using a distant laser source. All measurements will be acquired on the same air mass at the same time, in a semi-desertic site near Lamar, Colorado (U.S.. For each instrument, multiple analysis techniques will be tested: the target is a better comprehension of the systematics and limits of applicability of each method. The system is composed by a Lidar (elastic+Raman, fully designed and built within this project, and by the Atmospheric Monitoring Telescope (AMT, a telescope for the detection of UV light owned by the Colorado School of Mines. The setup of the two instruments is described in detail here. The project is presently in its third year: the Lidar system has been tested at the University of L'Aquila in February 2014 before shipment to the U.S., and the AMT has been recently reinstalled and tested in Lamar (May 2014. In June/July 2014 the ARCADE group will work out the final setup of the Lidar+AMT system in Lamar and will begin data acquisition.

  12. Projected total energy surface description for axial shape asymmetry in 172W

    Science.gov (United States)

    Tu, Ya; Chen, YongShou; Gao, ZaoChun; Yu, ShaoYing; Liu, Ling

    2014-11-01

    The projected total energy surface (PTES) approach has been developed based on the triaxial projected shell model (TPSM) hybridized with the macroscopic-microscopic method. The total energy of an atomic nucleus is decomposed into macroscopic, microscopic and rotational terms. The macroscopic and microscopic components are described with the liquid drop model and Strutinsky method, respectively, and the rotational energy is given by the TPSM, the term beyond the mean field. To test theory, the PTES calculations have been carried out for the yrast states of the well deformed rare earth nucleus 172W, and the theoretical results are in good agreement with the experimental data. By using the equilibrium quardrupole deformations ( ɛ 2 and γ) determined by the PTES, the calculation of the transition quardrupole moment ( Q t ) in function of spin also reproduces the experimental data. A comparison between the PTES and TRS methods has been made for theoretical and application uses.

  13. Reuniting the Solar System: Integrated Education and Public Outreach Projects for Solar System Exploration Missions and Programs

    Science.gov (United States)

    Lowes, Leslie; Lindstrom, Marilyn; Stockman, Stephanie; Scalice, Daniela; Klug, Sheri

    2003-01-01

    The Solar System Exploration Education Forum has worked for five years to foster Education and Public Outreach (E/PO) cooperation among missions and programs in order to leverage resources and better meet the needs of educators and the public. These efforts are coming together in a number of programs and products and in '2004 - The Year of the Solar System.' NASA's practice of having independent E/PO programs for each mission and its public affairs emphasis on uniqueness has led to a public perception of a fragmented solar system exploration program. By working to integrate solar system E/PO, the breadth and depth of the solar system exploration program is revealed. When emphasis is put on what missions have in common, as well as their differences, each mission is seen in the context of the whole program.

  14. Thermal power systems small power systems application project: Siting issues for solar thermal power plants with small community applications

    Science.gov (United States)

    Holbeck, H. J.; Ireland, S. J.

    1979-01-01

    The siting issues associated with small, dispersed solar thermal power plants for utility/small community applications of less than 10 MWe are reported. Some specific requirements are refered to the first engineering experiment for the Small Power Systems Applications (SPSA) Project. The background for the subsequent issue discussions is provided. The SPSA Project and the requirements for the first engineering experiment are described, and the objectives and scope for the report as a whole. A overview of solar thermal technologies and some technology options are discussed.

  15. Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 4: Solar electric propulsion vehicle

    Science.gov (United States)

    1991-03-01

    This document presents the solar electric propulsion (SEP) concept design developed as part of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the SEP concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

  16. Utility-Scale Solar 2014. An Empirical Analysis of Project Cost, Performance, and Pricing Trends in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Seel, Joachim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-09-01

    Other than the nine Solar Energy Generation Systems (“SEGS”) parabolic trough projects built in the 1980s, virtually no large-scale or “utility-scale” solar projects – defined here to include any groundmounted photovoltaic (“PV”), concentrating photovoltaic (“CPV”), or concentrating solar thermal power (“CSP”) project larger than 5 MWAC – existed in the United States prior to 2007. By 2012 – just five years later – utility-scale had become the largest sector of the overall PV market in the United States, a distinction that was repeated in both 2013 and 2014 and that is expected to continue for at least the next few years. Over this same short period, CSP also experienced a bit of a renaissance in the United States, with a number of large new parabolic trough and power tower systems – some including thermal storage – achieving commercial operation. With this critical mass of new utility-scale projects now online and in some cases having operated for a number of years (generating not only electricity, but also empirical data that can be mined), the rapidly growing utility-scale sector is ripe for analysis. This report, the third edition in an ongoing annual series, meets this need through in-depth, annually updated, data-driven analysis of not just installed project costs or prices – i.e., the traditional realm of solar economics analyses – but also operating costs, capacity factors, and power purchase agreement (“PPA”) prices from a large sample of utility-scale solar projects in the United States. Given its current dominance in the market, utility-scale PV also dominates much of this report, though data from CPV and CSP projects are presented where appropriate.

  17. Solar-Storm/Lunar Atmosphere Model (SSLAM): An overview of the effort and description of the driving storm environment

    Science.gov (United States)

    Farrell, W. M.; Halekas, J. S.; Killen, R. M.; Delory, G. T.; Gross, N.; Bleacher, L. V.; Krauss-Varben, D.; Travnicek, P.; Hurley, D.; Stubbs, T. J.; Zimmerman, M. I.; Jackson, T. L.

    2012-10-01

    On 29 April 1998, a coronal mass ejection (CME) was emitted from the Sun that had a significant impact at Earth. The terrestrial magnetosphere became more electrically active during the storm passage. Less explored is the effect of such a storm on an exposed rocky body like our Moon. The solar-storm/lunar atmosphere modeling effort (SSLAM) brings together surface interactions, exosphere, plasma, and surface charging models all run with a common driver - the solar storm and CME passage occurring from 1 to 4 May 1998. We present herein an expanded discussion on the solar driver during the 1-4 May 1998 period that included the passage of an intense coronal mass ejection (CME) that had >10 times the solar wind density and had a compositional component of He++ that exceeded 20%. During this time, the plasma mass flux to the exposed lunar surface increased by over 20 times compared to the nominal solar wind, to a value near 10-13 kg/m2-s. Over a two day CME passage by the Moon, this amount approaches 300 tons of added mass to the Moon in the form of individual proton and helium ions. Such an increase in ion flux should have a profound impact on sputtering loss rates from the surface, since this process scales as the mass, energy, and charge state of the incident ion. Associated loss processes were addressed by SSLAM and will be discussed herein.

  18. Projected Shell Model Description of Positive Parity Band of 130Pr Nucleus

    Science.gov (United States)

    Singh, Suram; Kumar, Amit; Singh, Dhanvir; Sharma, Chetan; Bharti, Arun; Bhat, G. H.; Sheikh, J. A.

    2018-02-01

    Theoretical investigation of positive parity yrast band of odd-odd 130Pr nucleus is performed by applying the projected shell model. The present study is undertaken to investigate and verify the very recently observed side band in 130Pr theoretically in terms of quasi-particle (qp) configuration. From the analysis of band diagram, the yrast as well as side band are found to arise from two-qp configuration πh 11/2 ⊗ νh 11/2. The present calculations are viewed to have qualitatively reproduced the known experimental data for yrast states, transition energies, and B( M1) / B( E2) ratios of this nucleus. The recently observed positive parity side band is also reproduced by the present calculations. The energy states of the side band are predicted up to spin 25+, which is far above the known experimental spin of 18+ and this could serve as a motivational factor for future experiments. In addition, the reduced transition probability B( E2) for interband transitions has also been calculated for the first time in projected shell model, which would serve as an encouragement for other research groups in the future.

  19. Array automated assembly task low cost silicon solar array project. Phase 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Clayton

    1980-12-01

    The initial contract was a Phase II Process Development for a process sequence, but with concentration on two particular process steps: laserscribing and spray-on junction formation. The add-on portion of the contract was to further develop these tasks, to incorporate spray-on of AR Coating and aluminum and to study the application of microwave energy to solar cell fabrication. The overall process cost projection is 97.918 cents/Wp. The major contributor to this excess cost is the module encapsulation materials cost. During the span of this contract the study of microwave application to solar cell fabrication produced the ability to apply this technique to any requirement of 600/sup 0/C or less. Above this temperature, non-uniformity caused the processing to be unreliable. The process sequence is described in detail, and a SAMICS cost analysis for each valid process step studied is presented. A temporary catalog for expense items is included, and engineering specifications for the process steps are given. (WHK)

  20. SOLHYCO Project: cogeneration system with concentrated solar energy and biofuels; Projeto SOLHYCO: sistema de cogeracao de energia solar concentrada e biocombustiveis

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Celso Eduardo Lins de; Rabi, Jose Antonio; Carrer, Celso da Costa; Cavinatto, Betina; Tomasella, Peterson Ricardo [Universidade de Sao Paulo (FZEA-USP), SP (Brazil). Fac. de Zootecnia e Engenharia de Alimentos

    2008-07-01

    Dispatchable renewable power generation is usually associated with expensive storages or additional back-up systems. Solar-hybrid systems can combine solar energy with an additional fuel and thus reliably provide electric power. If renewable fuels (e.g., biofuels) are employed, power generation becomes 100% sustainable at zero net emissions. Systems based on gas turbines are suited for cogeneration or combined cycles, making them very efficient and cost effective. These cycles require high temperatures and pressures, thus the solar energy has to be concentrated by a heliostat field onto the top of a tower and transferred by a solar receiver into the gas turbine cycle. At smaller power levels, cogeneration of heat and power is an attractive option by making use of the high exhaust temperature of the gas turbine, thus getting an additional benefit. The aim of this proposal is an significant extension of the objectives of the recently started SOLHYCO project by means A profound knowledge for market introduction will be gained by the assessment of the Brazilian market concerning solar resources, biofuels, electricity markets, heat markets and social needs. A detailed design study for a first demonstration unit will deliver all necessary economical, social and environmental data and accordingly 3 case studies have been defined. (author)

  1. PV Reliability Development Lessons from JPL's Flat Plate Solar Array Project

    Science.gov (United States)

    Ross, Ronald G., Jr.

    2013-01-01

    Key reliability and engineering lessons learned from the 20-year history of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project and thin film module reliability research activities are presented and analyzed. Particular emphasis is placed on lessons applicable to evolving new module technologies and the organizations involved with these technologies. The user-specific demand for reliability is a strong function of the application, its location, and its expected duration. Lessons relative to effective means of specifying reliability are described, and commonly used test requirements are assessed from the standpoint of which are the most troublesome to pass, and which correlate best with field experience. Module design lessons are also summarized, including the significance of the most frequently encountered failure mechanisms and the role of encapsulate and cell reliability in determining module reliability. Lessons pertaining to research, design, and test approaches include the historical role and usefulness of qualification tests and field tests.

  2. A description of the catalog division project at the College of Physicians of Philadelphia Library.

    Science.gov (United States)

    Caspari, S B; Batty, E L

    1975-07-01

    This paper describes the procedures used at the Library of the College of Physicians of Philadelphia to divide its ninety-year-old dictionary card catalog. The division was necessitated by overcrowding, obsolete subject headings, and lack of a complete authority list which resulted in like materials being scattered throughout the catalog under several headings. Two catalogs were created: the historical-biographical catalog, representing all works published before 1950 and all works of historical or biographical nature; and the current catalog, containing all works published from 1950 on, excepting historical or biographical materials. The 1950- catalog was further divided into name and subject catalogs, and the subject section was revised according to MeSH. The project was completed in about two years. As a result, searching time has been much reduced, and the library is able to take advantage of the annual revisions of MeSH to update the subject catalog.

  3. Solid State Large Area Pulsed Solar Simulator for 3-, 4- and 6-Junction Solar Cell Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The ssLAPSS expands on the SOP LAPSS by upgrading the light sources to enable future solar cell technologies while maintaining all of the current, proven calibration...

  4. Physics-based Space Weather Forecasting in the Project for Solar-Terrestrial Environment Prediction (PSTEP) in Japan

    Science.gov (United States)

    Kusano, K.

    2016-12-01

    Project for Solar-Terrestrial Environment Prediction (PSTEP) is a Japanese nation-wide research collaboration, which was recently launched. PSTEP aims to develop a synergistic interaction between predictive and scientific studies of the solar-terrestrial environment and to establish the basis for next-generation space weather forecasting using the state-of-the-art observation systems and the physics-based models. For this project, we coordinate the four research groups, which develop (1) the integration of space weather forecast system, (2) the physics-based solar storm prediction, (3) the predictive models of magnetosphere and ionosphere dynamics, and (4) the model of solar cycle activity and its impact on climate, respectively. In this project, we will build the coordinated physics-based model to answer the fundamental questions concerning the onset of solar eruptions and the mechanism for radiation belt dynamics in the Earth's magnetosphere. In this paper, we will show the strategy of PSTEP, and discuss about the role and prospect of the physics-based space weather forecasting system being developed by PSTEP.

  5. 78 FR 63276 - Interim Policy, FAA Review of Solar Energy System Projects on Federally Obligated Airports

    Science.gov (United States)

    2013-10-23

    ... production or the heating of water, in certain situations the glass surfaces of the solar energy systems can... photovoltaic (PV) and solar hot water (SHW) systems on airports. While solar PV or SHW systems (henceforth... Alteration. Standard for Measuring Ocular Impact FAA adopts the Solar Glare Hazard Analysis Plot shown in...

  6. Federal and State Structures to Support Financing Utility-Scale Solar Projects and the Business Models Designed to Utilize Them

    Energy Technology Data Exchange (ETDEWEB)

    Mendelsohn, M.; Kreycik, C.

    2012-04-01

    Utility-scale solar projects have grown rapidly in number and size over the last few years, driven in part by strong renewable portfolio standards (RPS) and federal incentives designed to stimulate investment in renewable energy technologies. This report provides an overview of such policies, as well as the project financial structures they enable, based on industry literature, publicly available data, and questionnaires conducted by the National Renewable Energy Laboratory (NREL).

  7. Project 'Colored solar collectors' - Annual report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Schueler, A.; Chambrier, E. De; Roecker, Ch.; Scartezzini, J.-L.

    2005-12-15

    The architectural integration of thermal solar collectors into buildings is often limited by their black color, and the visibility of tubes and corrugations of the absorber sheets. A certain freedom in color choice would be desirable, but the colored appearance should not cause excessive performance degradation. Multilayered thin film interference filters on the collector glazing can produce a colored reflection, hiding the corrugated metal sheet, while transmitting the non-reflected radiation entirely to the absorber. These interference filters are designed and optimized by numerical simulation and shall be manufactured by the sol-gel dip-coating process. The proposed colored glazed solar collectors will be ideally suited for architectural integration into buildings, e.g. as solar active glass facades. The availability of thin film materials with a refractive index lower than that of silicon favors a higher solar transmission at a given value of visible reflectance. The feasibility of the sol-gel deposition of such low refractive index materials has been demonstrated. For the development of nanostructured materials, analytical methods such as electron microscopy are extremely helpful. Important techniques of substrate pretreatment, sample cleaving, polishing, mounting, and microscope handling have been acquired. First measurements yield images of nanostructures produced by the sol-gel dip-coating process. Nanocomposite Ti{sub x}Si{sub 1-x}O{sub 2} thin films provide a large range of refractive indices. Aiming a high efficiency of the colored reflection, Ti{sub x}Si{sub 1-x}O{sub 2} based multilayered coatings have been designed and subsequently prepared by sol-gel dip-coating. The energy efficiency M = R{sub VIS}/(100%-T{sub sol}) of the obtained colored reflection amounts up to 2.4. For a convincing demonstration sufficiently large samples of high quality are imperatively needed. An infrastructure for the handling of A4 sized samples has been established

  8. Solar-Storm/Lunar Atmosphere Model (SSLAM): An Overview of the Effort and Description of the Driving Storm Environment

    Science.gov (United States)

    Farrell, W. M.; Halekas, J. S.; Killen, R. M.; Delroy, G. T.; Gross, N.; Bleacher, V; Krauss-Varben, D.; Hurley, D; Zimmerman, M. I.

    2012-01-01

    On 29 April 1998, a coronal mass ejection (CME) was emitted from the Sun that had a significant impact on bodies located at 1 AU. The terrestrial magnetosphere did indeed become more electrically active during the storm passage but an obvious question is the effect of such a storm on an exposed rocky body like our Moon. The solar-storm/lunar atmosphere modeling effort (SSLAM) brings together surface interactions, exosphere, plasma, and surface charging models all run with a common driver - the solar storm and CME passage occurring from 1-4 May 1998. We present herein an expanded discussion on the solar driver during the 1-4 May 1998 period that included the passage of an intense coronal mass ejection (CME) that had> 10 times the solar wind density and had a compositional component of He++ that exceeded 20%. We also provide a very brief overview oflhe SSLAM system layout and overarching results. One primary result is that the CME driver plasma can greatly increase the exospheric content via sputtering, with total mass loss rates that approach 1 kg/s during the 2-day CME passage. By analogy, we suggest that CME-related sputtering increases might also be expected during a CME passage by a near-earth asteroid or at the Mars exobase, resulting in an enhanced loss of material.

  9. A novel integrated thermal-/membrane-based solar energy-driven hybrid desalination system: Concept description and simulation results

    KAUST Repository

    Kim, Youngdeuk

    2016-05-03

    In this paper, a hybrid desalination system consisting of vacuum membrane distillation (VMD) and adsorption desalination (AD) units, designated as VMD-AD cycle, is proposed. The synergetic integration of the VMD and AD is demonstrated where a useful effect of the AD cycle is channelled to boost the operation of the VMD process, namely the low vacuum environment to maintain the high pressure gradient across the microporous hydrophobic membrane. A solar-assisted multi-stage VMD-AD hybrid desalination system with temperature modulating unit is first designed, and its performance is then examined with a mathematical model of each component in the system and compared with the VMD-only system with temperature modulating and heat recovery units. The total water production and water recovery ratio of a solar-assisted 24-stage VMD-AD hybrid system are found to be about 21% and 23% higher, respectively, as compared to the VMD-only system. For the solar-assisted 24-stage VMD-AD desalination system having 150 m2 of evacuated-tube collectors and 10 m3 seawater storage tanks, both annual collector efficiency and solar fraction are close to 60%.

  10. Description and Prevalence of Spondyloarthritis in Patients with Anterior Uveitis: The SENTINEL Interdisciplinary Collaborative Project.

    Science.gov (United States)

    Juanola, Xavier; Loza Santamaría, Estíbaliz; Cordero-Coma, Miguel

    2016-08-01

    To describe and analyze the prevalence of spondyloarthritis (SpA) in patients with anterior uveitis (AU). Multicentric, observational, prospective study. Consecutive patients with AU who were human leukocyte antigen (HLA)-B27 positive or HLA-B27 negative with more than 1 episode of AU separated by at least 3 months were selected. Patients with a previous diagnosis of SpA were excluded. Included patients were evaluated by an ophthalmologist and a rheumatologist following a predefined visit schedule. Sociodemographic and clinical variables including the diagnosis of SpA according to Assessment of SpondyloArthritis International Society (ASAS) criteria and an exhaustive ophthalmological examination (best-corrected visual acuity, intraocular pressure, biomicroscopic examination of the anterior and posterior segment of the eye, cataract evaluation, optical coherence tomography evaluating both the 1-mm central retina thickness and the optic nerve head and retinal nerve fiber layer, and visual field in a dark room with 1 eye patched) were collected. Baseline descriptive, bivariate, and concordance analyses were performed. We included 798 patients, mostly men (59%) with a mean age of 45 years; 60% were AU HLA-B27 positive, and 40% had recurrent negative AU HLA-B27. A total of 50.2% and 17.5% of patients presented axial and peripheral SpA according to ASAS criteria, respectively. Patients with AU who were HLA-B27 positive were more frequently diagnosed with axial (69.8% vs. 27.3%, P < 0.0001) and peripheral SpA (21.9% vs. 11.1%, P < 0.0001) than patients with recurrent negative AU HLA-B27. In general, we did not detect important differences between groups in the ophthalmologic variables. A large percentage of patients with clinically significant AU have an undiagnosed SpA. This percentage is even higher if the HLA-B27 haplotype is positive. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  11. Project JADE. Description of the MLH-method; Projekt JADE. Beskrivning av MLH-metoden

    Energy Technology Data Exchange (ETDEWEB)

    Sandstedt, H.; Munier, R. [Scandiaconsult, Stockholm (Sweden); Wichmann, C. [Nitro Consult AB, Stockholm (Sweden); Isaksson, Therese [Royal Inst. of Tech., Stockholm (Sweden). Div. of Soil and Rock Mechanics

    2001-08-01

    This report constitutes a part of a series of reports within project JADE, comparison of deposition methods. A comparison of the deposition methods MLH (Medium Long Holes with approximately 25 copper canisters emplaced in a horizontal deposition hole about 200 metres in length bored between central and side tunnels) and KBS-3 (copper canisters are emplaced in vertical deposition holes bored in the floors of horizontal tunnels) has earlier been performed and KBS-3 was judged to be more advantageous than MLH. However, the prerequisites for the comparison have changed with time and an updated evaluation of MLH was therefore required. In this report, the current knowledge of MLH is summarized with focus on geological prerequisites, methods for boring long, horizontal deposition holes, reinforcement and sealing, deposition and cost. Comparisons with KBS-3 are performed sequentially. An MLH-repository is judged to be more sensitive to ingress of water to the deposition holes during the deposition process. This implies that a MLH repository based on today's knowledge is basically recommended for bedrock with fairly low water baring capacity. It has been demonstrated that MLH has considerable economic potential compared to KBS-3. However, the method is judged to be more technically immature than KBS-3. Particularly, methods and equipment for deposition of canisters need to be developed further. Methods and equipment for deposition can be developed, which fulfill the demands on function and safety, in the near future. MLH cannot therefore be rejected as deposition method.

  12. National Program for Solar Heating and Cooling of Buildings. Project Date Summaries. Vol. I: Commercial and Residential Demonstrations.

    Science.gov (United States)

    Energy Research and Development Administration, Washington, DC. Div. of Solar Energy.

    Three volumes present brief abstracts of projects funded by the Energy Research and Development Administration (ERDA) and conducted under the National Program for Solar Heating and Cooling of Buildings through July 1976. The overall federal program includes demonstrations of heating and/or combined cooling for residential and commercial buildings…

  13. Solar housing construction. Thousands of solar cells form the facade of a living project for homeless people in Paris; Solarer Wohnungsbau. Tausende von Solarzellen bilden die Fassade eines Wohnprojekts fuer Obdachlose in Paris

    Energy Technology Data Exchange (ETDEWEB)

    Korn, Stefan

    2013-02-15

    A house on the banks of the historic channel Saint Martin in Paris in the elegant tenth arrondissement attracts attention: An emerald-colored solar facade extends from the roof to the ground floor between town palaces. But the spectacular front of the building does not cover luxury condominiums for the Parisian upper class, but a social housing project for families in need.

  14. Transformation of soil organics under extreme climate events: a project description

    Science.gov (United States)

    Blagodatskaya, Evgenia

    2017-04-01

    Recent climate scenarios predict not only continued global warming but also an increased frequency and intensity of extreme climatic events such as strong changes in temperature and precipitation with unusual regional dynamics. Weather anomalies at European territory of Russia are currently revealed as long-term drought and strong showers in summer and as an increased frequency of soil freezing-thawing cycles. Climate extremes totally change biogeochemical processes and elements cycling both at the ecosystem level and at the level of soil profile mainly affecting soil biota. Misbalance in these processes can cause a reduction of soil carbon stock and an increase of greenhouse gases emission. Our project aims to reveal the transformation mechanisms of soil organic matter caused by extreme weather events taking into consideration the role of biotic-abiotic interactions in regulation of formation, maintenance and turnover of soil carbon stock. Our research strategy is based on the novel concept considering extreme climatic events (showers after long-term droughts, soil flooding, freezing-thawing) as abiotic factors initiating a microbial succession. Study on stoichiometric flexibility of plants under climate extremes as well as on resulting response of soil heterotrophs on stoichiometric changes in substrate will be used for experimental prove and further development of the theory of ecological stoichiometry. The results enable us to reveal the mechanisms of biotic - abiotic interactions responsible for the balance between mobilization and stabilization of soil organic matter. Identified mechanisms will form the basis of an ecosystem model enabled to predict the effects of extreme climatic events on biogenic carbon cycle in the biosphere.

  15. An analysis of key environmental and social risks in the development of concentrated solar power projects

    Science.gov (United States)

    Otieno, George A.; Loosen, Alexander E.

    2016-05-01

    Concentrated Solar Power projects have impacts on local environment and social conditions. This research set out to investigate the environmental and social risks in the development of such projects and rank these risks from highest to lowest. The risks were analysed for parabolic trough and tower technologies only. A literature review was undertaken, identifying seventeen risks that were then proposed to six CSP experts for scoring. The risks were scored based of five factors on a five tier scale. The scores from the experts were compiled to develop an overall rank of the identified risks. The risk of disruption of local water resources was found to represent the highest risk before and after mitigation with a score of moderate-high and moderate respectively. This score is linked to the importance of water in water scarce regions typified by the best regions for CSP. The risks to avian species, to worker health and safety, due to noise on the environment, to visual and recreational resources completed the top five risks after mitigation.

  16. Involvement of the US Department of Defense in Civilian Assistance, Part I: a quantitative description of the projects funded by the Overseas Humanitarian, Disaster, and Civic Aid Program.

    Science.gov (United States)

    Bourdeaux, Margaret Ellis; Lawry, Lynn; Bonventre, Eugene V; Burkle, Frederick M

    2010-03-01

    To review the history and goals of the US Department of Defense's largest civilian assistance program, the Overseas Humanitarian, Disaster and Civic Aid Program and to describe the number, geographic regions, years, key words, countries, and types of projects carried out under this program since 2001. Using the program's central database, we reviewed all approved projects since 2001 and tabulated them by year, combatant command, country, and key word. We also reviewed the project descriptions of projects funded between January 1, 2006, and February 9, 2008, and examined how their activities varied by combatant command and year. Of the 5395 projects in the database, 2097 were funded. Projects took place in more than 90 countries, with Southern, Pacific, and Africa Command hosting the greatest number. The most common types of projects were school, health, disaster response, and water infrastructure construction, and disaster-response training. The "global war on terror" was the key word most frequently tagged to project descriptions. Project descriptions lacked stated goals as well as implementation and coordination strategies with potential partners, and did not report outcome or impact indicators. The geographic reach of the program is vast and projects take place in a wide variety of public sectors. Yet their security and civilian assistance value remains unclear given the lack of stated project goals, implementation strategies, or measures of effectiveness. To facilitate transparency and policy discussion, we recommend project proposals include hypotheses as to how they will enhance US security, their relevance to the public sector they address, and outcome and impact indicators that can assess their value and effectiveness.

  17. Low cost solar array project. Quarterly progress report, July-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The overall objective of the LSA Silicon Material Task is to establish a chemical process for producing silicon at a rate and price commensurate with the production goals of the LSA project for solar-cell modules. As part of the overall Silicon Material Task, Union Carbide developed the silane-silicon process and advanced the technology to the point where it has a definite potential for providing high-purity polysilicon on a commercial scale at a price of $14/kg by 1986 (1980 dollars). This process for preparing semiconductor-grade silicon in the EPSDU from metallurgical-grade (M-G) silicon is based on a well-integrated arrangement of purification steps that provides a cost-effective process system. The three basic steps entail converting M-G silicon to trichlorosilane, redistributing the trichlorosilane to produce silane, and thermally decomposing the silane to form amorphous silicon powder. The powder is then melted and the molten silicon is cast into polycrystalline silicon for subsequent use in fabricating solar cells. Progress is reported on the following tasks: (1) design, fabricate, install, and operate an Experimental Process System Development Unit (EPSDU) sized for 100 MT/Yr to obtain extensive performance data to establish the data base for the design of commercial facilities; (2) perform supporting research and development to provide an information base usable for the EPSDU and for technological design and economic analysis for potential scale-up of the process; and (3) perform iterative economic analyses of the estimated product cost for the product of semiconductor-grade silicon in a facility capable of producing 1000 MT/Yr. (WHK)

  18. Low-Cost Solar-Array Project. Quarterly progress report, April-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The overall objective of the LSA Silicon Material Task is to establish a chemical process for producing silicon at a rate and price commensurate with the production goals of the LSA project for solar-cell modules. As part of the overall Silicon Material Task, Union Carbide developed the silane-silicon process and advanced the technology to the point where it has a definite potential for providing high-purity polysilicon on a commercial scale at a price of $14/kg by 1986 (1980 dollars). This work, completed under Phases I and II of the contract, provided a firm base for the Phase III Program (initiated in April 1979) aimed at establishing the practicality of the process by pursuing the following specific objectives: (1) design, fabricate, install, and operate an Experimental Process System Development Unit (EPSDU) sized for 100 MT/yr to obtain extensive performance data to establish the data base for the design of commercial facilities; (2) perform support research and development to provide an information base usable for the EPSDU and for technological design and economic analysis for potential scale-up of the process; and (3) perform iterative economic analyses of the estimated product cost for the production of semiconductor-grade silicon in a facility capable of producing 1000 MT/yr. This process for preparing semiconductor-grade silicon in the EPSDU from metallurgical-grade (M-G) silicon is based on a well-integrated arrangement of purification steps that provides a cost-effective process system. The three basic steps entail converting M-G silicon to trichlorosilane, redistributing the trichlorosilane to produce silane, and thermally decomposing the silane to form amorphous silicon powder. The powder is then melted and the molten silicon is cast to polycrystalline for subsequent use in fabricating solar cells. Progress is reported in detail. (WHK)

  19. High Efficiency Quantum Dot III-V Multijunction Solar Cell for Space Power Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We are proposing to utilize quantum dots to develop a super high-efficiency multijunction III-V solar cell for space. In metamorphic triple junction space solar...

  20. Advanced Materials and Production Technology for Very Large Solar Sail Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar sails are an attractive means for propulsion of future spacecraft. One potential device for deploying and supporting very large solar sails is the CoilAble...

  1. Multi-Use Solar Thermal System for Oxygen Production from Lunar Regolith [7227-570] Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop an innovative solar thermal system for oxygen production from lunar regolith. In this system solar radiation is collected by the concentrator...

  2. SPS-ALPHA: The First Practical Solar Power Satellite via Arbitrarily Large PHased Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SPS-ALPHA (Solar Power Satellite via Arbitrarily Large Phased Array) is a novel, bio-mimetic approach to the challenge of space solar power. If successful, this...

  3. SOLERAS - Solar Controlled Environment Agriculture Project. Final report, Volume 4. Saudi Engineering Solar Energy Applications System Design Study

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    Literature summarizing a study on the Saudi Arabian solar controlled environment agriculture system is presented. Specifications and performance requirements for the system components are revealed. Detailed performance and cost analyses are used to determine the optimum design. A preliminary design of an engineering field test is included. Some weather data are provided for Riyadh, Saudi Arabia. (BCS)

  4. Overview of NASA Finesse (Field Investigations to Enable Solar System Science and Exploration) Science and Exploration Project

    Science.gov (United States)

    Heldmann, J. L.; Lim, D.S.S.; Hughes, S.; Nawotniak, S. Kobs; Garry, B.; Sears, D.; Neish, C.; Osinski, G. R.; Hodges, K.; Downs, M.; hide

    2016-01-01

    NASA's FINESSE (Field Investigations to Enable Solar System Science and Exploration) project was selected as a research team by NASA's Solar System Exploration Research Virtual Institute (SSERVI). SSERVI is a joint Institute supported by NASA's Science Mission Directorate (SMD) and Human Exploration and Operations Mission Directorate (HEOMD). As such, FINESSE is focused on a science and exploration field-based research program to generate strategic knowledge in preparation for human and robotic exploration of other planetary bodies including our Moon, Mars moons Phobos and Deimos, and near-Earth asteroids. FINESSE embodies the philosophy that "science enables exploration and exploration enables science".

  5. American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 281 Solar Hot Water Application Assessment for U.S. Army IMCOM-Southeast Region

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Bryan J.; Chvala, William D.

    2010-09-30

    The Energy Independence and Security Act of 2007 requires installations (EISA) to install solar systems of sufficient capacity to provide 30% of service hot water in new construction and renovations where cost-effective. However, installations are struggling with how to implement solar hot water, and while several installations are installing solar hot water on a limited basis, paybacks remain long. Pacific Northwest National Laboratory (PNNL) was tasked to address this issue to help determine how best to implement solar hot water projects. This documents discusses the results of that project.

  6. SOLIDARIZATE : project in the solar schools of Greenpace-IDA; Solarizate : Proyecto escuelas solares de Greenpeace-IDAE

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, A.; Perpinan, O.; Ramirez, F.; Eyras, R.

    2004-07-01

    The SOLARIZATE Project arises from the agreement between Greenpeace and IDAE to make 52 photovoltaic grid connected systems in Public Schools all around Spain. The present article makes a revision of the characteristics of the project, of the actual situation and also of the experience accumulated, permitting to conclude that administrative and legal troubles have direct responsibility of the delay of the project and, in general, of the stoppage of the Spanish market during the last years. (Author)

  7. Utility-Scale Solar 2016: An Empirical Analysis of Project Cost, Performance, and Pricing Trends in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark; Seel, Joachim; LaCommare, Kristina Hamachi

    2017-09-19

    The utility-scale solar sector has led the overall U.S. solar market in terms of installed capacity since 2012. In 2016, the utility-scale sector installed more than 2.5 times as much new capacity as did the residential and commercial sectors combined, and is expected to maintain its dominant position for at least another five years. This report—the fifth edition in an ongoing annual series—provides data-driven analysis of the utility-scale solar project fleet in the United States. We analyze not just installed project prices, but also operating costs, capacity factors, and power purchase agreement ("PPA") prices from a large sample of utility-scale PV and CSP projects throughout the United States. Highlights from this year's edition include the following: Installation Trends: The use of solar tracking devices dominated 2016 installations, at nearly 80% of all new capacity. In a reflection of the ongoing geographic expansion of the market beyond California and the Southwest, the median long-term average insolation level at newly built project sites declined again in 2016. While new fixed-tilt projects are now seen predominantly in less-sunny regions, tracking projects are increasingly pushing into these same regions. The median inverter loading ratio has stabilized in 2016 at 1.3 for both tracking and fixed-tilt projects. Installed Prices: Median installed PV project prices within a sizable sample have fallen by two-thirds since the 2007-2009 period, to $2.2/WAC (or $1.7/WDC) for projects completed in 2016. The lowest 20th percentile of projects within our 2016 sample were priced at or below $2.0/WAC, with the lowest-priced projects around $1.5/WAC. Overall price dispersion across the entire sample and across geographic regions decreased significantly in 2016. Operation and Maintenance (“O&M”) Costs: What limited empirical O&M cost data are publicly available suggest that PV O&M costs were in the neighborhood of $18/kWAC-year, or $8/MWh, in 2016. These

  8. Description of the lynx spiders of a canopy fogging project in northern Borneo (Araneae: Oxyopidae), with description of a new genus and six new species of Hamataliwa

    NARCIS (Netherlands)

    Deeleman - Reinhold, C.L.

    2009-01-01

    All oxyopid spider species collected in a long-term ecological canopy project in northern Borneo are described. A total of nine species in three genera could be established, one of which belongs to a new genus. Four species could be assigned to known species, five are described as new species in the

  9. Organized Hole Conducting Polymer/Nanoparticle Composite Solar Cell Fiber Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent innovations in noncrystalline solar cells are beginning to emerge as viable replacements to traditional CVD grown single crystal counterparts in applications...

  10. 77 FR 67662 - Notice of Availability of the Desert Harvest Solar Project Final Environmental Impact Statement...

    Science.gov (United States)

    2012-11-13

    ... authorization to construct, operate, maintain, and decommission a solar photovoltaic electricity generating... substation, an administration building, operations and maintenance facilities, a transmission line, and...

  11. Implementing Best Practices for Data Quality Assessment of the National Renewable Energy Laboratory?s Solar Resource and Meteorological Assessment Project: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S. M.; McCormack, P.

    2011-04-01

    Effective solar radiation measurements for research and economic analyses require a strict protocol for maintenance, calibration, and documentation to minimize station downtime and data corruption. The National Renewable Energy Laboratory's Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data includes guidelines for operating a solar measurement station. This paper describes a suite of automated and semi-automated routines based on the best practices handbook as developed for the National Renewable Energy Laboratory Solar Resource and Meteorological Assessment Project. These routines allow efficient inspection and data flagging to alert operators of conditions that require immediate attention. Although the handbook is targeted for concentrating solar power applications, the quality-assessment procedures described are generic and should benefit many solar measurement applications. The routines use data in one-minute measurement resolution, as suggested by the handbook, but they could be modified for other time scales.

  12. Japan's Sunshine Project. 1988 annual summary of solar energy research and development program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-07-01

    Mentioned in relation to the research and development of photovoltaic power generation systems are fundamental research on solar cells, research on advanced photovoltaic system technologies, research and development of amorphous solar cells, etc. Mentioned in relation to the technical development for the practical use of photovoltaic power generation systems are low-cost SOG(spin on glass)-silicon experimental production and verification, solar cell panel experimental manufacture and verification, technical development of high efficiency cell fabrication, research and development of amorphous silicon solar cells, research and development of evaluation systems for photovoltaic cells and modules, development of support technology for photovoltaic power generation (power generation support technology, interconnection and control of photovoltaic systems), etc. Also discussed are a stand-alone dispersed system, meteorological analysis, centralized solar power system, development of photovoltaic thermal hybrid solar power generation system, etc. In relation to solar thermal energy, a solar thermal power generation system, and an evaluation system are taken up, and the development is discussed of a fixed heat process type system, an advanced heat process type system, and a long-term heat storage system, these for application to industrial processes. Reference is also made to international cooperation. (NEDO)

  13. Projecte d'implantació d'energia solar fotovoltaica al municipi d'Albanyà

    OpenAIRE

    Molins i Galas, Albert

    2008-01-01

    Disseny d’una instal·lació d’energia solar fotovoltaica per als edificis públics del municipi d’Albanyà (Alt Empordà) per connectar-la a la xarxa i amb un estudi sobre la substitució dels actuals fanals de l’enllumenat públic per fanals alimentats amb energia solar fotovoltaica

  14. Energy Conservation and Solar Retrofitting for Existing Buildings in Oregon: An Architectural Design Class Project.

    Science.gov (United States)

    Oregon Univ., Eugene. School of Architecture and Allied Arts.

    Five privately owned homes and two university owned homes were examined by architecture students in order to formulate design alternatives to fit the houses with solar collection, storage, and control devices for supplementing domestic space and/or water heating. General principles advanced include why energy conservation and solar retrofitting…

  15. Model studies of the solar limb shape variation with wavelenght within the PICARD project.

    Science.gov (United States)

    Melo, Stella M. L.; Thuillier, Gerard; Claudel, Jennyfer; Haberreiter, Margit; Mein, Nicole; Schmutz, Werner; Shapiro, Alexander; Sofia, Sabatino; Short, Christopher I.

    Solar images in the visible wavelength range show that the disk centre is brighter than the limb region. This phenomenon, which is both known as "centre to limb variation (CLV)", or "limb darkening function", is know to depend on wavelength. Since the CLV is determined by the density and temperature stratification, as well as the chemical composition of the so-lar photosphere, its measurement is important to validate theoretical assumption made when building numerical models of the solar atmosphere. The definition of the solar diameter is nor-mally adopted as the separation between two inflection points at opposite ends of a line passing through the center of the solar disk. Therefore, in order to understand long term variability on the solar diameter, it is important to understand what drives the dependence of the position of the inflection point on wavelength. In this paper we use different available solar atmosphere models to study this dependence. The results presented here refer to quiet Sun conditions and encompass the visible and near infra-red spectral regions, which are the regions of interest for the PICARD Satellite Mission. In a first step we utilize the solar atmosphere parameters with a radiative transfer code. This allows for the study of the impact of different factors such as opacities, electron density and temperature from different models on the results. Then, we compare results obtained using each solar atmosphere model. Our results are compared with existent ground based measurements performed by the Pic du Midi telescope, the balloon board measurements with the Solar Disk Sextant experiment, and with the measurements by the Michelson Doppler Imager on board SoHO satellite. The model simulations show that the position of the inflection point is sensitive to the different parameters and model assumptions. Furthermore, our study shows, for the first time, that the position of the inflection point changes dramatically with and outside of

  16. Surface-water-quality assessment of the upper Illinois River basin in Illinois, Indiana, and Wisconsin; project description

    Science.gov (United States)

    Mades, D.M.

    1987-01-01

    In 1986, the U.S. Geological Survey began a National Water-Quality Assessment program to (1) provide nationally consistent descriptions of the current status of water quality for a large, diverse, and geographically distributed part of the Nation's surface- and ground-water resources; (2) define, where possible, trends in water quality; and (3) identify and describe the relations of both status and trends in water quality to natural factors and the history of land use and land- and waste-management activities. The program is presently in a pilot phase that will test and modify, as necessary, concepts and approaches in preparation for possible full implementation of the program in the future. The upper Illinois River basin is one of four basins selected to test the concepts and approaches of the surface-water-quality element of the national program. The basin drains 10,949 square miles of Illinois, Indiana, and Wisconsin. Three principal tributaries are the Kankakee and Des Plaines Rivers that join to form the Illinois River and the Fox River. Land use is predominantly agricultural; about 75 percent of the basin is cultivated primarily for production of corn and soybeans. About 13 percent of the basin is urban area, most of which is located in the Chicago metropolitan area. The population of the basin is about 7 million. About 6 million people live in the Des Plaines River basin. Many water-quality issues in the upper Illinois River basin are related to sediment, nutrients, potentially toxic inorganic and organic constituents, and to water-management practices. Occurrence of sediment and the chemical constituents in the rivers and lakes within the basin has the potential to adversely affect the water's suitability for aquatic life, recreation, or, through the consumption of fish, human health. The upper Illinois River basin project consists of five major activities. The first activity--analysis of existing information and preparation of a report that describes

  17. Colorado State University program for developing, testing, evaluating and optimizing solar heating and cooling systems: Project status report for the months of October and November, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report describes a project to develop tools for evaluating solar heating and cooling systems. Current work on this project has been to validate the Florida Solar Energy Center`s (FSEC) models of the Solahart 302K and 302K-AS systems to prepare a rating for the Sacramento Municipal Utility District`s rebate program for solar domestic hot water heaters. A preliminary rating has been issued by FSEC and updated ratings will be released as necessary. Two of the problems that were mentioned in the August/September report are addressed and a tank heat loss test is discussed. Work continues on improving and validating the models.

  18. Impact of a rural solar electrification project on the level and structure of women’s empowerment

    Science.gov (United States)

    Burney, Jennifer; Alaofè, Halimatou; Naylor, Rosamond; Taren, Douglas

    2017-09-01

    Although development organizations agree that reliable access to energy and energy services—one of the 17 Sustainable Development Goals—is likely to have profound and perhaps disproportionate impacts on women, few studies have directly empirically estimated the impact of energy access on women’s empowerment. This is a result of both a relative dearth of energy access evaluations in general and a lack of clarity on how to quantify gender impacts of development projects. Here we present an evaluation of the impacts of the Solar Market Garden—a distributed photovoltaic irrigation project—on the level and structure of women’s empowerment in Benin, West Africa. We use a quasi-experimental design (matched-pair villages) to estimate changes in empowerment for project beneficiaries after one year of Solar Market Garden production relative to non-beneficiaries in both treatment and comparison villages (n = 771). To create an empowerment metric, we constructed a set of general questions based on existing theories of empowerment, and then used latent variable analysis to understand the underlying structure of empowerment locally. We repeated this analysis at follow-up to understand whether the structure of empowerment had changed over time, and then measured changes in both the levels and likelihood of empowerment over time. We show that the Solar Market Garden significantly positively impacted women’s empowerment, particularly through the domain of economic independence. In addition to providing rigorous evidence for the impact of a rural renewable energy project on women’s empowerment, our work lays out a methodology that can be used in the future to benchmark the gender impacts of energy projects.

  19. High-Performance Elastically Self-Deployed Roll-Out Solar Array (ROSA) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Deployable Space Systems (DSS) has developed an ultra-lightweight elastically self-deployable roll-out solar array (ROSA) structural platform that when combined with...

  20. A Coupled System for Assessing the Threat of Solar Energetic Particle Events Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar Particle Events (SPEs) represent a major hazard for extravehicular maneuvers by astronauts in Earth orbit, and for eventual manned interplanetary space travel....

  1. Novel Materials that Enhance Efficiency and Radiation Resistance of Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar cell is the key device in generating electrical power for spacecrafts. It is an on-going challenge in maximizing electrical power available to spacecraft while...

  2. Novel Materials that Enhance Efficiency and Radiation Resistance of Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Spacecrafts rely on arrays of solar cells to generate electrical power. It is an on-going challenge to maximize electrical power available to spacecraft while...

  3. TRUSSELATOR - On-Orbit Fabrication of High Performance Support Structures for Solar Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TUI proposes to develop and demonstrate a process for fabricating high-performance composite truss structures on-orbit and integrating them with thin film solar cell...

  4. TRUSSELATOR - On-Orbit Fabrication of High Performance Support Structures for Solar Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Trusselator technology will enable on-orbit fabrication of support structures for high-power solar arrays and large antennas, achieving order-of-magnitude...

  5. The Focusing Optics X-ray Solar Imager (FOXSI): Update & Second Launch Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Particle acceleration in solar flares and its contribution to coronal heating are among the main  unsolved problems in heliophysics. Accelerated electrons in a...

  6. High Efficiency Solar Cell on Low Cost Metal Foil Substrate Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Future space missions will require Solar cell arrays having specific power ratings in excess of 1000 W/kg. Conventional crystalline photovoltaic technology comprised...

  7. FDM-HAWK, A High Performance Compact Modular Solar Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Developing a next generation high performance solar array with significant reduction in size and weight will result in improved NASA mission capabilities at lower...

  8. High-Efficiency, Radiation-Hard, Lightweight IMM Solar Cells Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Future NASA exploration missions require high specific power (>500 W/kg) solar arrays. To increase cell efficiency while reducing weight and maintaining...

  9. Development of Advanced Anti-Reflection Coatings for High Performance Solar Energy Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — MicroLink Devices will increase the efficiency of multi-junction solar cells by designing and demonstrating advanced anti-reflection coatings (ARCs) that will...

  10. Cost Reduction of IMM Solar Cells by Recycling Substrates using Wet Chemical Etching Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This program focuses on reducing the cost of substrate reclaim for high-efficiency solar cells fabricated via an epitaxial lift-off (ELO) process, while increasing...

  11. SOLAROSA (Stretched Optical Lens Architecture on Roll-Out Solar Array) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Deployable Space Systems, Inc. (DSS), in partnership with Entech Solar (ENTECH) and Carbon-Free Energy (CFE) will focus the proposed NASA Phase 1 effort on the...

  12. CuInGaAlSe2 Solar Absorbers On Flexible High-Temperature Substrates Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ITN Energy Systems (ITN) proposes to take the next step in spacecraft solar array development, building upon previous development and new findings to make the...

  13. Next Generation Extremely Large Solar Array System for NASA Exploration Missions Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed technology is a revolutionary solar array advancement that relies on a structurally optimized platform to provide unparalleled specific-performance and...

  14. Spacecraft/Rover Hybrids for the Exploration of Small Solar System Bodies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this effort is to develop a mission architecture that allows the systematic and affordable in situ exploration of small Solar System bodies (such...

  15. Efficient Lightweight AC-AC Power Control for Solar UAV Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A highly efficient and lightweight dual bridge matrix power controller development is proposed that will provide high performance to a solar powered high altitude...

  16. Development of Advanced Anti-Reflection Coatings for High Performance Solar Energy Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — MicroLink and its subcontractor Magnolia Solar will develop and demonstrate advanced anti-reflection coating (ARC) designs that will provide a better broadband and...

  17. Interplanetary CubeSats: Opening the Solar System to a Broad Community at Lower Cost Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Today, Solar System exploration missions are the exclusive domain of space agencies and their scientists and engineers who can muster multi-hundred-million dollar...

  18. West Chester Work Center Solar Space Heating Demonstration Project. Final technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    An integrated system is described providing solar energy space heating for a 9982 sq ft, newly built, one-story building. Functionally, the building consists of two sections: an office and a storeroom. The office section is heated by solar-assisted water-to-air heat pump units. The storeroom section is heated by an air-handling unit, containing a water-to-air coil. The system design was based on solar energy providing 62% of the heating load, with the balance to be supplied by heat pump power and a back-up electric boiler. The system includes 1900 active (2112 gross) square feet of flat-plate solar collectors, and a 6000 gallon above-ground indoor storage tank. Freeze protection is provided by a gravity drain-down scheme combined with nitrogen pressurization in a closed circuit.

  19. Cost Reduction of IMM Solar Cells by Recycling Substrates Using Wet Chemical Etching Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the program is to reduce the cost of substrate reclaim for high-efficiency solar cells fabricated by an epitaxial lift-off (ELO) process, and to increase...

  20. Subject description of non-fiction literature for adults: expert-theoretical basis for the realisation of the »Hidden Treasure« research project

    Directory of Open Access Journals (Sweden)

    Andrej Pogorelec

    2004-01-01

    Full Text Available Library users searching through non-fiction library material by subject in online OPACs, expect to be able to search fiction by subject as well. The research project Skriti zaklad (Hidden Treasure was launched in 2002 and was aimed at improving the current subject description of non-juvenile literary works in Slovenian libraries. An overview of the current practice of fiction subject description in Slovenian libraries revealed that Universal Decimal Classification class numbers are usually assigned, while subject headings or abstracts are scarce. The article presents a model designed for subject description of fiction, with special emphasis on subject headings, for the Bežigrad High School Library and the Bežigrad Public Library (both in Ljubljana.

  1. Airport Solar Photovoltaic Concentrator Project. Phase 1 - final report, June 1, 1978-February 28, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The system design, analysis, and specification, site preparation, and operation and evaluation plan for a 500 kWe photovoltaic power supply to be located at the Phoenix Sky Harbor International Airport in Phoenix, Arizona, are presented. The solar cell arrays are concentrator silicon solar cells with tracking 70X Cassegrain-type concentrators. The power conditioning system, tracking system, and control systems are described in detal. Environmental impact studies are described. Component specifications and drawings are included. (WHK)

  2. Silicon-Light: a European FP7 Project Aiming at High Efficiency Thin Film Silicon Solar Cells on Foil

    DEFF Research Database (Denmark)

    Soppe, W.; Haug, F.-J.; Couty, P.

    2011-01-01

    calculations of ideal nanotextures for light trapping in thin film silicon solar cells; the fabrication of masters and the replication and roll-to-roll fabrication of these nanotextures. Further, results on ITO variants with improved work function are presented. Finally, the status of cell fabrication on foils......Silicon-Light is a European FP7 project, which started January 1st, 2010 and aims at development of low cost, high-efficiency thin film silicon solar cells on foil. Three main routes are explored to achieve these goals: a) advanced light trapping by implementing nanotexturization through UV Nano...... with nanotexture is shown. Microcrystalline and amorphous silicon single junction cells with stable efficiencies with more than 8 % have been made, paving the way towards a-Si/ c-Si tandem cells with more than 11% efficiency....

  3. Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

    Energy Technology Data Exchange (ETDEWEB)

    Ermi, A.M.

    1997-05-01

    Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.

  4. A symmetry-conserving description of odd nuclei with the Gogny force. Particle number and angular-momentum projection with self-consistent blocking

    Energy Technology Data Exchange (ETDEWEB)

    Borrajo, M.; Egido, J.L. [Universidad Autonoma de Madrid, Departamento de Fisica Teorica, Madrid (Spain)

    2016-09-15

    We present an approach for the calculation of odd nuclei with exact self-consistent blocking and particle number and angular-momentum projection with the finite-range density-dependent Gogny force. As an application we calculate the nucleus {sup 31}Mg at the border of the N = 20 inversion island. We evaluate the ground-state properties, the excited states and the transition probabilities. In general we obtain a good description of the measured observables. (orig.)

  5. Wood drying project with solar energy and absorption plant; Proyecto de un secador de madera con energia solar termica y una planta de absorcion

    Energy Technology Data Exchange (ETDEWEB)

    Corretger, J. M.; Lara, J.; Arnau, J.; Marquez, A.

    2004-07-01

    Wood drying processes currently are developed in tunnel dryers using an air hot flow through the wood to remove the water. These processes are interesting to dry current wood that does not require special control of the drying velocity. However, could be necessary to control drying velocity at any moment of the process in order to dry some high quality wood. This implies to combine heating processes, cooling and dehumidification processes and humidification processes. The aim of this project is to dry noble woods with a drying complex process, in order to improve the quality of the products and to increase the energy saving by free-cooling operations and advanced control strategies, increased by using solar energy to get cold and hot water. The saving of energy will produce a bill reduction and an important minimization of environmental impact. (Author)

  6. Solar Tyrol project: using climate data for energy production estimation. The good practice of Tyrol in conceptualizing climate services.

    Science.gov (United States)

    Petitta, Marcello; Wagner, Jochen; Costa, Armin; Monsorno, Roberto; Innerebner, Markus; Moser, David; Zebisch, Marc

    2014-05-01

    The scientific community in the last years is largely discussing the concept of "Climate services". Several definitions have been used, but it still remains a rather open concept. We used climate data from analysis and reanalysis to create a daily and hourly model of atmospheric turbidity in order to account the effect of the atmosphere on incoming solar radiation with the final aim of estimating electric production from Photovoltaic (PV) Modules in the Alps. Renewable Energy production in the Alpine Region is dominated by hydroelectricity, but the potential for photovoltaic energy production is gaining momentum. Especially the southern part of the Alps and inner Alpine regions offer good conditions for PV energy production. The combination of high irradiance values and cold air temperature in mountainous regions is well suited for solar cells. To enable more widespread currency of PV plants, PV has to become an important part in regional planning. To provide regional authorities and also private stakeholders with high quality PV energy yield climatology in the provinces of Bolzano/Bozen South Tirol (Italy) and Tyrol (Austria), the research project Solar Tyrol was inaugurated in 2012. Several methods are used to calculate very high resolution maps of solar radiation. Most of these approaches use climatological values. In this project we reconstructed the last 10 years of atmospheric turbidity using reanalysis and operational data in order to better estimate incoming solar radiation in the alpine region. Our method is divided into three steps: i) clear sky radiation: to estimate the atmospheric effect on solar radiation we calculated Linke Turbidity factor using aerosols optical depth (AOD), surface albedo, atmospheric pressure, and total water content from ECMWF and MACC analysis. ii) shadows: we calculated shadows of mountains and buildings using a 2 meter-resolution digital elevation model of the area and GIS module r.sun modified to fit our specific needs. iii

  7. Solar energy system demonstration project at Wilmington Swim School, New Castle, Delaware. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    This document is the Final Report of the Solar Energy System located at the Wilmington, Swim School, New Castle, Delaware. This active solar system is composed of 2,700 square feet of Revere liquid flat plate collectors piped to a 2,800 gallon concrete storage tank located below ground near the building. A micro-computer based control system selects the optimal applications of the stored energy among space, domestic water and pool alternatives. The controlled logic is planned for serving the heat loads in the following order: space heat-new addition, domestic water-entire facility, and pool heating-entire facility. A modified trombe wall passive operation the active system will bypass the areas being served passively. The system was designed for a 40 percent heating and a 30 percent hot water solar contribution.

  8. Non-Radioisotope Power Systems For Sunless Solar System Exploration Missions Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Description: explore mission architectures to the Moon's southern Aitken Basin, the surface of Saturn’s moon, Titan, and the surface of Venus that do not...

  9. Acceleration, Transport, Forecasting and Impact of solar energetic particles in the framework of the 'HESPERIA' HORIZON 2020 project

    Science.gov (United States)

    Malandraki, Olga; Klein, Karl-Ludwig; Vainio, Rami; Agueda, Neus; Nunez, Marlon; Heber, Bernd; Buetikofer, Rolf; Sarlanis, Christos; Crosby, Norma

    2017-04-01

    High-energy solar energetic particles (SEPs) emitted from the Sun are a major space weather hazard motivating the development of predictive capabilities. In this work, the current state of knowledge on the origin and forecasting of SEP events will be reviewed. Subsequently, we will present the EU HORIZON2020 HESPERIA (High Energy Solar Particle Events foRecastIng and Analysis) project, its structure, its main scientific objectives and forecasting operational tools, as well as the added value to SEP research both from the observational as well as the SEP modelling perspective. The project addresses through multi-frequency observations and simulations the chain of processes from particle acceleration in the corona, particle transport in the magnetically complex corona and interplanetary space to the detection near 1 AU. Furthermore, publicly available software to invert neutron monitor observations of relativistic SEPs to physical parameters that can be compared with space-borne measurements at lower energies is provided for the first time by HESPERIA. In order to achieve these goals, HESPERIA is exploiting already available large datasets stored in databases such as the neutron monitor database (NMDB) and SEPServer that were developed under EU FP7 projects from 2008 to 2013. Forecasting results of the two novel SEP operational forecasting tools published via the consortium server of 'HESPERIA' will be presented, as well as some scientific key results on the acceleration, transport and impact on Earth of high-energy particles. Acknowledgement: This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 637324.

  10. Solar PV Project Financing: Regulatory and Legislative Challenges for Third-Party PPA System Owners

    Energy Technology Data Exchange (ETDEWEB)

    Kollins, K.; Speer, B.; Cory, K.

    2009-11-01

    Residential and commercial end users of electricity who want to generate electricity using on-site solar photovoltaic (PV) systems face challenging initial and O&M costs. The third-party ownership power purchase agreement (PPA) finance model addresses these and other challenges. It allows developers to build and own PV systems on customers? properties and sell power back to customers. However, third-party electricity sales commonly face five regulatory challenges. The first three challenges involve legislative or regulatory definitions of electric utilities, power generation equipment, and providers of electric services. These definitions may compel third-party owners of solar PV systems to comply with regulations that may be cost prohibitive. Third-party owners face an additional challenge if they may not net meter, a practice that provides significant financial incentive to owning solar PV systems. Finally, municipalities and cooperatives worry about the regulatory implications of allowing an entity to sell electricity within their service territories. This paper summarizes these challenges, when they occur, and how they have been addressed in five states. This paper also presents alternative to the third-party ownership PPA finance model, including solar leases, contractual intermediaries, standardized contract language, federal investment tax credits, clean renewable energy bonds, and waived monopoly powers.

  11. Solar Total Energy Test Facility Project. Semiannual report, October 1976--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    Petterson, B. Jr. (ed.)

    1977-08-01

    The Solar Total Energy System will operate as follows: A heat transfer fluid (Therminol 66) is heated in the receiver tubes of the solar collectors by reflected and focused solar radiation. This fluid is pumped to the high-temperature storage subsystem. Fluid is extracted from this storage on a demand basis and pumped to the heat exchanger which produces superheated toluene vapor to power the turbine/generator. The boiler can also be operated from a fossil fuel-fired heater to insure continuity of operation during extended cloudy periods. Turbine condenser coolant is pumped to the low-temperature storage tank and becomes the energy source for heating and air-conditioning components of the system. Progress is reported on the design, fabrication, installation, and checkout of the first 200 m/sup 2/ collector field quadrant, a high-temperature stratified storage tank, a 32-kW turbine/generator and Therminol-to-toluene heat exchanger, an instrumentation and control subsystem, a cooling tower, the turbine and control building, and all necessary pumps and fluid loops to interconnect these subsystems. Also, experience with operating the facility in accordance with a detailed test plan to provide performance data on all subsystems and to accumulate operating and maintenance experience which can provide a basis for the design of large-scale experimental plants and future solar energy systems is described. (WHK)

  12. Sensitivity of Solar Fossil Hybrid Electricity Technology Penetration to Price and Efficiency Projections

    Science.gov (United States)

    With many aging coal and nuclear plants nearing retirement age, new electricity production capacity will need to be built over the next several decades. There are many methods of generating electricity, each with different benefits and drawbacks. While solar and wind generation a...

  13. Silicon-Light: a European project aiming at high efficiency thin film silicon solar cells on foil

    Directory of Open Access Journals (Sweden)

    Soppe W.

    2014-07-01

    Full Text Available In the European project Silicon-Light we developed concepts and technologies to increase conversion efficiencies of thin film silicon solar cells on foil. Main focus was put on improved light management, using NIL for creating light scattering textures, improved TCOs using sputtering, and improved silicon absorber material made by PECVD. On foil we achieved initial cell efficiencies of 11% and on rigid substrates stable efficiencies of 11.6% were achieved. Finally, the project demonstrated the industrial scale feasibility of the developed technologies and materials. Cost of ownership calculations showed that implementation of these technologies on large scale would enable the production of these high efficiency solar modules at manufacturing cost of 0.65 €/Wp with encapsulation costs (0.20 €/Wp being the dominant costs. Life cycle analysis showed that large scale production of modules based on the technologies developed in Silicon-Light would have an energy payback time of 0.85 years in Central European countries.

  14. Research programme 'Active Solar Energy Use - Solar Heating and Heat Storage'. Activities and projects 2003; Programme 'Solaire actif - Chaleur et Stockage de chaleur'. Activites et projets en 2003

    Energy Technology Data Exchange (ETDEWEB)

    Hadorn, J.-C. [Base Consultants, Geneva (Switzerland); Renaud, P. [Planair SA, La Sagne (Switzerland)

    2003-07-01

    In this report by the research, development and demonstration (RD+D) programme coordinators the objectives, activities and main results in the area of solar heating and heat storage in Switzerland are presented for 2003. In a stagnating market environment the strategy of the Swiss Federal Office of Energy mainly consists in improving the quality and durability of solar collectors and materials, optimizing combisystems for space heating and domestic hot water preparation, searching for storage systems with a higher energy storage density than in the case of sensible heat storage in water, developing coloured solar collectors for more architectonic freedom, and finalizing a seasonal heat storage project for 100 dwellings to demonstrate the feasibility of solar fractions larger than 50% in apartment houses. Support was granted to the Swiss Testing Facility SPF in Rapperswil as in previous years; SPF was the first European testing institute to perform solar collector labeling according to the new rules of the 'Solar Keymark', introduced in cooperation with the European Committee for Standardization CEN. Several 2003 projects were conducted within the framework of the Solar Heating and Cooling Programme of the International Energy Agency IEA. Computerized simulation tools were improved. With the aim of jointly producing high-temperature heat and electric power a solar installation including a concentrating collector and a thermodynamic machine based on a Rankine cycle is still being developed. Seasonal underground heat storage was studied in detail by means of a validated computer simulation programme. Design guidelines were obtained for such a storage used in the summer time for cooling and in the winter time for space heating via a heat pump: depending on the ratio 'summer cooling / winter heating', cooling requires a cooling machine, or direct cooling without such a machine is possible. The report ends up with the list of all supported RD

  15. Solar-MEC Development Program. Project 61019 final report, September 1, 1977-March 9, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Kinast, J.A.; Wurm, J.; Zawacki, T.S.; Macriss, R.A.

    1985-03-01

    The Solar-MEC is an open-cycle, solid-desiccant solar-powered, heating/cooling system. Its development has been under way since 1974 under sponsorship of the National Science Foundation, the American Gas Association, and several private companies within the gas industry. The results, conclusions, and recommendations of the program are presented. All laboratory testing and evaluations carried out in support of the conceptual and engineering design and fabrication of an ''improved'' Solar-MEC (System III) unit are described. The performance of the ''improved'' Solar-MEC (System III) unit was evaluated in detail in the laboratory, under full-, part-, and overload conditions of weather; the results were used to develop a characteristic model and computer program for the System III unit. This model was subsequently used to carry out seasonal performance simulations for heating and cooling in six US cities to develop optimized operating control strategies for maximum efficiency with reasonable controls system complexity and, therefore, reasonable costs. The demonstrated improved performance of this new unit (System III) includes: cooling thermal COP of 0.50 under ARI conditions; unit cooling capacity of 2.6 tons under ARI conditions; average Energy Efficiency Ratio (EER) under ARI conditions of 26.5; electric parasitic power requirements (as percent of thermal power input requirements) of only 6.2; and tolerable capacity degradation. On the basis of the results of seasonal performance simulations with the new unit (System III), it was concluded that, for most climates, in order to maximize the system's efficiency for solar cooling at reasonable system complexity, the unit must be designed to operate in the ventilating mode and must be provided with sensing capability to respond to ambient high humidities. The unit must be capable of operating most of the time with combined solar-gas firing and part of the time (only in very

  16. Novel Solar Cell Nanotechnology for Improved Efficiency and Radiation Hardness Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Significant improvements in photovoltaic materials and systems are required to enable future exploration missions. This SBIR project, involving two innovative...

  17. Novel Solar Cell Nanotechnology for Improved Efficiency and Radiation Hardness Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Significant improvements in photovoltaic materials and systems are required to enable NASA future exploration missions. In this project, CFD Research Corporation...

  18. Optimal Site Selection of Wind-Solar Complementary Power Generation Project for a Large-Scale Plug-In Charging Station

    Directory of Open Access Journals (Sweden)

    Wenjun Chen

    2017-10-01

    Full Text Available The wind-solar hybrid power generation project combined with electric vehicle charging stations can effectively reduce the impact on the power system caused by the random charging of electric cars, contribute to the in-situ wind-solar complementary system and reduce the harm arising from its output volatility. In this paper, the site selection index system of a landscape complementary power generation project is established by using the statistical methods and statistical analysis in the literature. Subsequently, using the Analytic Network Process to calculate the index weight, a cloud model was used in combination with preference ranking organization method for enrichment evaluations to transform and sort uncertain language information. Finally, using the results of the decision-making for the location of the Shanghai wind-solar complementary project and by carrying out contrast analysis and sensitivity analysis, the superiority and stability of the decision model constructed in this study was demonstrated.

  19. Environmental Assessment for East Housing Area Solar Energy Project, Vandenberg Air Force Base, California

    Science.gov (United States)

    2014-07-01

    for classrooms as indicated in the Air Force adopted technical manual on noise and vibration control (AFJMAN 1995). Construction activities at the...erection of the solar panels, installation of inverters and other equipment on small concrete pads, construction of the perimeter and interior access...corresponding interior noise level (e.g., within an occupied classroom ) would be 45 dBA (which can be considered comparable to NC-35, per Engineering Noise

  20. Intermediate load modules for test and evaluation: Flat-Plate Solar Array Project

    Science.gov (United States)

    Bower, M. J.

    1985-01-01

    Two versions of a 36 stainless steel solar module were built. The first version was built as a commercial module for marine applications and was purchased for evaluation by JPL. Design deficiencies were identified as a result of the evaluation. The second version was built and the improvements that resulted from design changes are described. Assembly problems, electrical performance, and qualification test results are provided.

  1. High-Volume Production of Lightweight, Multi-Junction Solar Cells Using 6-inch GaAs Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Very large solar arrays to power future solar electric propulsion systems will require a new generation of solar cells that are not only high efficiency, but also...

  2. System design description for the SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

    Energy Technology Data Exchange (ETDEWEB)

    Ermi, A.M.

    1998-03-02

    There is no new activity or procedure associated with the updating of this reference document. The updating of this system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. Any changes made to controlled components in the field will be updated after the time of implementation to support the engineers and operators understand, maintain, train to and operate the system. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status. The incorporation of the two documents, Computer Systems Design Description (HNF-SD-WMCSDD-008) and the Input/Output Channel List (HNF-SD-WM-EL-001), as appendices allow for fewer errors in changes. Because the documents are all together, they will be approved as one document, not three separate entities which could be updated at different times, creating a situation which does not accurately depict field conditions.

  3. Environmental impact statement for the Encana shallow gas infill development in the CFB Suffield national wildlife area : volume 1 : project description

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-05-15

    EnCana Corporation (EnCana) proposed to carry out an infill development project within the boundaries of its existing developed shallow gas field in the Canadian Forces Base (CFB) Suffield National Wildlife Area (NWA) in southeast Alberta. EnCana proposed to drill 1275 infill wells over three drilling seasons, beginning in fall 2008. An environmental assessment was needed in order to extract remaining shallow tight sweet gas from the wildlife area. This paper presented the environmental impact statement (EIS) that was prepared by EnCana to meet this requirement. The paper provided a description of the project and discussed additional environmental protection measures as well as the regulatory and environmental settings. The scope of the environmental impact statement was identified. The findings of the assessment for each environmental component were also summarized with particular reference to vegetation, wetlands, wildlife, biodiversity, groundwater, surface water, aquatic ecology, soil, historical resources, palaeontology, socio-economics, air quality, noise, and human health. Mitigation strategies were also proposed. The paper also described a cumulative effects assessment and various potential malfunctions and accidental events that could occur during the project and result in potential environmental effects. In developing the project, EnCana concluded that it had taken an expansive approach to considering potential effects to ensure that the cumulative effects of the Project were known, understood and mitigated. 26 refs., 22 tabs., 9 figs.

  4. Decosol Project : development of solar plate collectors of high efficiency and low cost for medium temperature application; Proyecto Decosol: Desarrollo de colectores solares planos de alta eficiencia ybajo coste para aplicaciones a mediana temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Cadafalch, J.; Oliva, A.; Lavandeira, J. C.; Maestre, F.; Martinez, J. C.; Martin, J. R.; Hermo, R.

    2004-07-01

    Work that is currently being carried out by the authors in the framework of the project DECOSOL (Development of high efficiency and low cost flat plate collectors for medium temperature applications) is described in this paper. The goal of DECOSOL is to consolidate the results of previous R AND D projects conducted by the authors on the development of stagnation proof transparently insulated flat plate solar collectors prototypes, in order to end up with commercial products. (Author)

  5. Solar radiation management impacts on agriculture in China: A case study in the Geoengineering Model Intercomparison Project (GeoMIP)

    Science.gov (United States)

    Xia, Lili; Robock, Alan; Cole, Jason; Curry, Charles L.; Ji, Duoying; Jones, Andy; Kravitz, Ben; Moore, John C.; Muri, Helene; Niemeier, Ulrike; Singh, Balwinder; Tilmes, Simone; Watanabe, Shingo; Yoon, Jin-Ho

    2014-07-01

    Geoengineering via solar radiation management could affect agricultural productivity due to changes in temperature, precipitation, and solar radiation. To study rice and maize production changes in China, we used results from 10 climate models participating in the Geoengineering Model Intercomparison Project (GeoMIP) G2 scenario to force the Decision Support System for Agrotechnology Transfer (DSSAT) crop model. G2 prescribes an insolation reduction to balance a 1% a-1 increase in CO2 concentration (1pctCO2) for 50 years. We first evaluated the DSSAT model using 30 years (1978-2007) of daily observed weather records and agriculture practices for 25 major agriculture provinces in China and compared the results to observations of yield. We then created three sets of climate forcing for 42 locations in China for DSSAT from each climate model experiment: (1) 1pctCO2, (2) G2, and (3) G2 with constant CO2 concentration (409 ppm) and compared the resulting agricultural responses. In the DSSAT simulations: (1) Without changing management practices, the combined effect of simulated climate changes due to geoengineering and CO2 fertilization during the last 15 years of solar reduction would change rice production in China by -3.0 ± 4.0 megaton (Mt) (2.4 ± 4.0%) as compared with 1pctCO2 and increase Chinese maize production by 18.1 ± 6.0 Mt (13.9 ± 5.9%). (2) The termination of geoengineering shows negligible impacts on rice production but a 19.6 Mt (11.9%) reduction of maize production as compared to the last 15 years of geoengineering. (3) The CO2 fertilization effect compensates for the deleterious impacts of changes in temperature, precipitation, and solar radiation due to geoengineering on rice production, increasing rice production by 8.6 Mt. The elevated CO2 concentration enhances maize production in G2, contributing 7.7 Mt (42.4%) to the total increase. Using the DSSAT crop model, virtually all of the climate models agree on the sign of the responses, even though

  6. Project 'Colored solar collectors' - Annual report 2004

    Energy Technology Data Exchange (ETDEWEB)

    Schueler, A.; Chambrier, E. De; Roecker, Ch.; Scartezzini, J.-L.

    2004-12-15

    The architectural integration of thermal solar collectors into buildings is often limited by their black color, and the visibility of tubes and corrugations of the absorber sheets. A certain freedom in color choice would be desirable, but the colored appearance should not cause excessive performance degradation. Multilayered thin film interference filters on the collector glazing can produce a colored reflection, hiding the corrugated metal sheet, while transmitting the non-reflected radiation entirely to the absorber. These interference filters are designed and optimized by numerical simulation and shall be manufactured by the sol-gel dip-coating process. The proposed colored glazed solar collectors will be ideally suited for architectural integration into buildings, e.g. as solar active glass facades. The sol-gel fabrication of interference stacks of up to five layers of silicon and titanium oxide films could be demonstrated in the laboratory, in the first step on microscope slides. Optical measurements are used to determine film thicknesses and optical constants of the individual layers, and to measure color coordinates and solar transmission for the multilayer stacks. The solar transmission of such samples can be improved by titanium silicon mixed oxides, which could have been synthesized by the sol-gel method. Hereby the compatibility problems of the originally used solution have been solved, and the refractive index of the resulting mixed oxide can be perfectly controlled by tuning the atomic concentration ratio of silicon and titanium. One of the main technical risks is related to the fact that for a convincing demonstration of the idea high quality coatings are absolutely necessary. Therefore, visible defects induced during the dip-coating process by dust particles in the atmosphere or in the used solutions must be imperatively avoided, as well as thickness variations due to vibrations. After optimizing various aspects of sample preparation, processing and

  7. Automation of the National Water Quality Laboratories, U. S. Geological Survey. I. Description of laboratory functions and definition of the automation project

    Energy Technology Data Exchange (ETDEWEB)

    Morris, W.F.; Ames, H.S.

    1977-07-01

    In January 1976, the Water Resources Division of the U.S. Geological Survey asked Lawrence Livermore Laboratory to conduct a feasibility study for automation of the National Water Quality (NWQ) Laboratory in Denver, Colorado (formerly Denver Central Laboratory). Results of the study were published in the Feasibility Study for Automation of the Central Laboratories, Lawrence Livermore Laboratory, Rept. UCRL-52001 (1976). Because the present system for processing water samples was found inadequate to meet the demands of a steadily increasing workload, new automation was recommended. In this document we present details necessary for future implementation of the new system, as well as descriptions of current laboratory automatic data processing and analytical facilities to better define the scope of the project and illustrate what the new system will accomplish. All pertinent inputs, outputs, and other operations that define the project are shown in functional designs.

  8. SOLERAS - Solar Controlled Environment Agriculture Project. Final report, Volume 9. Science Applications, Incorporated Phase 2 - definition study

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    This report describes the effort required to implement the design of the Solar Controlled Environment Agriculture Engineering Test Facility, SCEA-ETF. This report is a basic blueprint for the Phase 2 activities which have as a goal the construction of the ETF. These activities have been broken down into five major tasks, namely Project Management; Engineering and Design; Procurement/Fabrication; Construction, Installation and Checkout; and Operation and Maintenance. The type of activities required under each of these tasks are described followed by a detailed work breakdown structure. The Phase 2 project organization is discussed. A 13 month schedule for the total project is also given. Lastly, two appendices discuss cost adjustment factors for an ETF located in the KSA, and an update of the commercial system cost estimate based on preliminary cost quotations for the ETF. The results show a 63% cost increase for the KSA ETF primarily due to higher construction costs and greater well depth. The commercial system cost required an adjustment upwards of 7.7%.

  9. The First Monolithic Silicon Carbide Active Pixel Sensor Array for Solar Blind UV Detection Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will address the needs of space astronomy, military threat detection, and scientific research for image...

  10. Mapping Episodic Stream Activity for the Ridgecrest Solar Power Project, Kern County, California

    Science.gov (United States)

    Thibodeaux-Yost, S. N.; Brady, R. H., III; Vyverberg, K.; Weinman, B.

    2013-12-01

    Large-scale renewable energy projects are being developed in the California desert region on large tracts of predominantly undeveloped land (total area of developed land for individual project sites vary from 327 acres to 8,230 acres). The absence of a standard method of identifying and accounting for episodic streams in arid and semi-arid (dryland) regions is an area of conflict between project developers and the government agencies responsible for protecting natural resources and permitting renewable energy projects. There is a need for an accurate dryland stream delineation protocol that is consistent, efficient, accessible, and accurately reflects the extent and distribution of streams on a site. Dryland stream delineation protocol based on a scientific, geomorphic and ecological understanding of dryland stream processes will help ensure dryland streams are accurately identified for the purposes of environmental impact assessments and project permitting. Such a method is currently being developed by the California Energy Commission (CEC) and the Department of Fish and Wildlife (CDFW). This thesis work critically evaluates the stream delineation and stream impact assessment previously completed by the developer for the proposed renewable energy project in El Paso Fan, El Paso Mountains, Ridgecrest, Kern County, California. This evaluation is then compared and contrasted with the results achieved in the field using the MESA (Mapping Episodic Stream Activity) stream delineation methods and protocols and mobile GIS mapping technology.

  11. ISS Solar Array Alpha Rotary Joint (SARJ) Bearing Failure and Recovery: Technical and Project Management Lessons Learned

    Science.gov (United States)

    DellaCorte, Christopher; Krantz, Timothy L.; Dube, Michael J.

    2011-01-01

    The photovoltaic solar panels on the International Space Station (ISS) track the Sun through continuous rotating motion enabled by large bearings on the main truss called solar array alpha rotary joints (SARJs). In late 2007, shortly after installation, the starboard SARJ had become hard to turn and had to be shut down after exceeding drive current safety limits. The port SARJ, of the same design, had been working well for over 2 years. An exhaustive failure investigation ensued that included multiple extravehicular activities to collect information and samples for engineering forensics, detailed structural and thermal analyses, and a careful review of the build records. The ultimate root cause was determined to be kinematic design vulnerability coupled with inadequate lubrication, and manufacturing flaws; this was corroborated through ground tests, metallurgical studies, and modeling. A highly successful recovery plan was developed and implemented that included replacing worn and damaged components in orbit and applying space-compatible grease to improve lubrication. Beyond the technical aspects, however, lie several key programmatic lessons learned. These lessons, such as running ground tests to intentional failure to experimentally verify failure modes, are reviewed and discussed so they can be applied to future projects to avoid such problems.

  12. The making of a new solar spectral irradiance composite - overview of the results from the SOLID Project

    Science.gov (United States)

    Haberreiter, M.; Dudok de Wit, T.; Kretzschmar, M.; Schöll, M.; Del Zanna, G.; Ermolli, I.

    2015-12-01

    Solar spectral irradiance (SSI) is a key driver for the Earth's climate system. To understand in detail the processes at play a consistent SSI time series with realistic uncertainty estimates is needed as input for climate models. However, irradiance observations exist only as numerous and disperse data sets. Also, different SSI instruments show varying instrumental noise and degradation. Due to these effects it is a challenge to build a consistent SSI data set. Within the European Project SOLID we developed tools to derive an objective SSI time series based on existing SSI measurements, complemented with reconstruction models. We present the SOLID SSI composite with a focus on the UV spectral range and compare it with other available SSI reconstructions.

  13. Projection of distributed-collector solar-thermal electric power plant economics to years 1990-2000

    Science.gov (United States)

    Fujita, T.; Elgabalawi, N.; Herrera, G.; Turner, R. H.

    1977-01-01

    A preliminary comparative evaluation of distributed-collector solar thermal power plants was undertaken by projecting power plant economics of selected systems to the 1990 to 2000 time frame. The selected systems include: (1) fixed orientation collectors with concentrating reflectors and vacuum tube absorbers, (2) one axis tracking linear concentrator including parabolic trough and variable slat designs, and (3) two axis tracking parabolic dish systems including concepts with small heat engine-electric generator assemblies at each focal point as well as approaches having steam generators at the focal point with pipeline collection to a central power conversion unit. Comparisons are presented primarily in terms of energy cost and capital cost over a wide range of operating load factors. Sensitvity of energy costs for a range of efficiency and cost of major subsystems/components is presented to delineate critical technological development needs.

  14. Solar Energy Technician/Installer

    Science.gov (United States)

    Moore, Pam

    2007-01-01

    Solar power (also known as solar energy) is solar radiation emitted from the sun. Large panels that absorb the sun's energy as the sun beats down on them gather solar power. The energy in the rays can be used for heat (solar thermal energy) or converted to electricity (photovoltaic energy). Each solar energy project, from conception to…

  15. Summary of completed project. [Particle acceleration during solar flares: Particle interactions with ambient plasma

    Science.gov (United States)

    Petrosian, Vahe

    1991-01-01

    The primary goal of the work in this proposal has been the determination of the requirement for acceleration of particles, especially electrons, during solar flares. This is one of the important and yet unsolved problems in solar flares and other astronomical objects. This is done by detailed theoretical investigation of interaction of accelerated particles with ambient plasma including interaction with particles, waves, and large scale magnetic fields. Comparison with observed impulsive phase radiation such as X-rays, gamma-rays, microwaves, and type III radiation is used for constraining the models and for determination of the characteristics of the accelerated particles. Steady state and time-dependent numerical codes have been developed based on the Fokker-Planck method for study of the particle acceleration and transport during a flare. Using these, the correlation between characteristics of radiation at various wavelengths have been investigated and some constraints have been set on the model parameters. During the last three year period of this grant, dissertation research of three graduate students have been partially supported by this grant. Each of these theses has dealt with various observed properties of flare emission with particular emphasis on the interrelationship between radiation in at least two energy bands: X-rays and gamma-rays, X-rays and microwaves, and X-rays and type III radiation. This has allowed considerable tightening of constraints on models, and inclusion of wave particle interaction has allowed direct calculations of acceleration processes.

  16. Economic and Environmental Performances of Small-Scale Rural PV Solar Projects under the Clean Development Mechanism: The Case of Cambodia

    Directory of Open Access Journals (Sweden)

    Ellen De Schepper

    2015-09-01

    Full Text Available The two core objectives of the Clean Development Mechanism (CDM are cost-effective emission reduction and sustainable development. Despite the potential to contribute to both objectives, solar projects play a negligible role under the CDM. In this research, the greenhouse gas mitigation cost is used to evaluate the economic and environmental performances of small-scale rural photovoltaic solar projects. In particular, we compare the use of absolute and relative mitigation costs to evaluate the attractiveness of these projects under the CDM. We encourage the use of relative mitigation costs, implying consideration of baseline costs that render the projects profitable. Results of the mitigation cost analysis are dependent on the baseline chosen. To overcome this drawback, we complement the analysis with a multi-objective optimization approach, which allows quantifying the trade-off between economic and environmental performances of the optimal technologies without requiring a baseline.

  17. Integration of concentrated solar power (CSP) and circulating fluidized bed (CFB) power plants - final results of the COMBO-CFB project

    Science.gov (United States)

    Suojanen, Suvi; Hakkarainen, Elina; Kettunen, Ari; Kapela, Jukka; Paldanius, Juha; Tuononen, Minttu; Selek, Istvan; Kovács, Jenö; Tähtinen, Matti

    2017-06-01

    Hybridization of solar energy together with another energy source is an option to provide heat and power reliably on demand. Hybridization allows decreasing combustion related fuel consumption and emissions, assuring stable grid connection and cutting costs of concentrated solar power technology due to shared power production equipment. The research project "Integration of Concentrated Solar Power (CSP) and Circulating Fluidized Bed (CFB) Power Plants" (COMBO-CFB) has been carried out to investigate the technical possibilities and limitations of the concept. The main focus was on the effect of CSP integration on combustion dynamics and on the joint power cycle, and on the interactions of subsystems. The research provides new valuable experimental data and knowhow about dynamic behaviour of CFB combustion under boundary conditions of the hybrid system. Limiting factors for maximum solar share in different hybridization schemes and suggestions for enhancing the performance of the hybrid system are derived.

  18. The ``Nordic`` HBV model. Description and documentation of the model version developed for the project Climate Change and Energy Production

    Energy Technology Data Exchange (ETDEWEB)

    Saelthun, N.R.

    1996-12-31

    The model described in this report is a version of the HBV model developed for the project Climate Change and Energy Production. This was a Nordic project aimed at evaluating the impacts of the Scandinavian countries including Greenland with emphasis on hydropower production. The model incorporates many of the features found in individual versions of the HBV model in use in the Nordic countries, and some new ones. It has catchment subdivision in altitude intervals, a simple vegetation parametrization including interception, temperature based evapotranspiration calculation, lake evaporation, lake routing, glacier mass balance simulation, special functions for climate change simulations etc. The user interface is very basic, and the model is primarily intended for research and educational purposes. Commercial versions of the model should be used for operational implementations. 5 refs., 4 figs., 1 tab.

  19. Project Maghreb - Europe: Solar Production of Hydrogen. Phase I: Feasibility and opportunity study of the project; Projet Maghreb - Europe: Production d'hydrogene solaire. Phase I: Etude d'opportunite et de faisabilite du projet

    Energy Technology Data Exchange (ETDEWEB)

    Mahmah, Bouziane; Belhamel, Maiouf; Chader, Samira; M' Raoui, Abdelhamid; Harouadi, Farid; Etievant, Claude; Lechevalier, Steve; Cherigui, Abdel-Nasser

    2007-07-01

    During the 16th World Hydrogen Energy Conference which held on June 13-16, 2006, in Lyon (France), an important project appeared, the Maghreb-Europe Project for production and export of solar hydrogen, proposed in the Algiers Declaration of the hydrogen of origin renewable and directed by the researchers efforts of the Renewable Energies Development Center of Algiers (CDER) and members of the European company of Hydrogen Technologies (CETH). The present introductory communication exposes a scientific study on the appropriateness and the feasibility of the Project, as well as the objectives, missions and the fundamental elements for a scientific and technique accompaniment of this important project. (auth)

  20. Solar-energy an American India (SAI) partnership: The Ramakrishna Mission PV Project

    Energy Technology Data Exchange (ETDEWEB)

    Ullal, H.S.; Stone, J.L. [National Renewable Energy Lab., Golden, CO (United States)

    1997-12-01

    This paper describes a cooperative program which was established in 1993 by the Minister of the Indian Ministry of Non-Conventional Energy Sources (MNES) and the Secretary of the U.S. Department of Energy (USDOE). Eventually it fielded one project, funded 50-50 for a total of 500k dollars. The project selected was a sustainable rural economic development initiative with Ramakrishna Mission in West Bengal, India, as the nongovernment organization (NGO). The objectives of the program were to establish the economic viability of photovoltaic power in the Sundarbans region of West Bengal. To have the project self-sustaining with minimal subsidies to the beneficiaries. To establish the infrastructure for financing, training, installation and maintenance with the NGO taking the lead. To work with the NGO to expand utilization of photovoltaics in the region. To perform a before and after social, economic, and environmental impact study with the Tata Energy Research Institute.

  1. Middle Atmosphere Response to Different Descriptions of the 11-Year Solar Cycle in Spectral Irradiance in a Chemistry-Climate Model

    Science.gov (United States)

    Swartz, W. H.; Stolarski, R. S.; Oman, L. D.; Fleming, E. L.; Jackman, C. H.

    2012-01-01

    The 11-year solar cycle in solar spectral irradiance (SSI) inferred from measurements by the SOlar Radiation & Climate Experiment (SORCE) suggests a much larger variation in the ultraviolet than previously accepted. We present middle atmosphere ozone and temperature responses to the solar cycles in SORCE SSI and the ubiquitous Naval Research Laboratory (NRL) SSI reconstruction using the Goddard Earth Observing System chemistry-climate model (GEOS CCM). The results are largely consistent with other recent modeling studies. The modeled ozone response is positive throughout the stratosphere and lower mesosphere using the NRL SSI, while the SORCE SSI produces a response that is larger in the lower stratosphere but out of phase with respect to total solar irradiance above 45 km. The modeled responses in total ozone are similar to those derived from satellite and ground-based measurements, 3-6 Dobson Units per 100 units of 10.7-cm radio flux (F10.7) in the tropics. The peak zonal mean tropical temperature response 50 using the SORCE SSI is nearly 2 K per 100 units 3 times larger than the simulation using the NRL SSI. The GEOS CCM and the Goddard Space Flight Center (GSFC) 2-D coupled model are used to examine how the SSI solar cycle affects the atmosphere through direct solar heating and photolysis processes individually. Middle atmosphere ozone is affected almost entirely through photolysis, whereas the solar cycle in temperature is caused both through direct heating and photolysis feedbacks, processes that are mostly linearly separable. Further, the net ozone response results from the balance of ozone production at wavelengths less than 242 nm and destruction at longer wavelengths, coincidentally corresponding to the wavelength regimes of the SOLar STellar Irradiance Comparison Experiment (SOLSTICE) and Spectral Irradiance Monitor (SIM) on SORCE, respectively. A higher wavelength-resolution analysis of the spectral response could allow for a better prediction of the

  2. THE YOUNG SOLAR ANALOGS PROJECT. I. SPECTROSCOPIC AND PHOTOMETRIC METHODS AND MULTI-YEAR TIMESCALE SPECTROSCOPIC RESULTS

    Energy Technology Data Exchange (ETDEWEB)

    Gray, R. O.; Briley, M. M.; Lambert, R. A.; Fuller, V. A.; Newsome, I. M.; Seeds, M. F. [Department of Physics and Astronomy, Appalachian State University, Boone, NC 26808 (United States); Saken, J. M.; Kahvaz, Y. [Department of Physics and Physical Science, Marshall University, Huntington, WV 25755 (United States); Corbally, C. J. [Vatican Observatory Research Group, Steward Observatory, Tucson, AZ 85721-0065 (United States)

    2015-12-15

    This is the first in a series of papers presenting methods and results from the Young Solar Analogs Project, which began in 2007. This project monitors both spectroscopically and photometrically a set of 31 young (300–1500 Myr) solar-type stars with the goal of gaining insight into the space environment of the Earth during the period when life first appeared. From our spectroscopic observations we derive the Mount Wilson S chromospheric activity index (S{sub MW}), and describe the method we use to transform our instrumental indices to S{sub MW} without the need for a color term. We introduce three photospheric indices based on strong absorption features in the blue-violet spectrum—the G-band, the Ca i resonance line, and the Hydrogen-γ line—with the expectation that these indices might prove to be useful in detecting variations in the surface temperatures of active solar-type stars. We also describe our photometric program, and in particular our “Superstar technique” for differential photometry which, instead of relying on a handful of comparison stars, uses the photon flux in the entire star field in the CCD image to derive the program star magnitude. This enables photometric errors on the order of 0.005–0.007 magnitude. We present time series plots of our spectroscopic data for all four indices, and carry out extensive statistical tests on those time series demonstrating the reality of variations on timescales of years in all four indices. We also statistically test for and discover correlations and anti-correlations between the four indices. We discuss the physical basis of those correlations. As it turns out, the “photospheric” indices appear to be most strongly affected by emission in the Paschen continuum. We thus anticipate that these indices may prove to be useful proxies for monitoring emission in the ultraviolet Balmer continuum. Future papers in this series will discuss variability of the program stars on medium (days–months) and short

  3. Projects to get you off the grid rain barrels, chicken coops, and solar panels

    CERN Document Server

    Instructablescom

    2014-01-01

    Instructables is back with this compact book focused on a series of projects designed to get you thinking creatively about thinking green. Twenty Instructables illustrate just how simple it can be to make your own backyard chicken coop, or turn a wine barrel into a rainwater collector.Illustrated with dozens of full-color photographs per project accompanying easy-to-follow instructions, this Instructables collection utilizes the best that the online community has to offer, turning a far-reaching group of people into a mammoth database churning out ideas to make life better, easier, and in this

  4. Evaluation of solar PV-projects of housing corporations; Evaluatie zon PV-projecten bij woningcorporaties

    Energy Technology Data Exchange (ETDEWEB)

    Kurstjens, M.J.H. [W/E Adviseurs, Utrecht (Netherlands)

    2013-09-15

    A study has been carried out to determine the failure and success factors with regard to the use of solar panels in the housing sector. Lessons learned from this evaluation form the basis for targeted communication and development of a guide for corporations. In the spring of 2013, stakeholders in eight representative initiatives in the Netherlands were interviewed. The failure and success factors are translated into recommendations to further develop tools for corporations [Dutch] Er is gezocht naar de faal- en succesfactoren rondom de toepassing van zonnepanelen in de woningbouwsector. Leerpunten uit deze evaluatie vormen de basis voor gerichte communicatie en ontwikkeling van (een) handreiking(en) voor corporaties. In het voorjaar van 2013 zijn betrokkenen bij acht representatieve initiatieven in Nederland geinterviewd. De faal- en succesfactoren zijn omgezet in aanbevelingen voor nader uit te werken hulpmiddelen voor corporaties.

  5. Middle atmosphere response to different descriptions of the 11-yr solar cycle in spectral irradiance in a chemistry-climate model

    Directory of Open Access Journals (Sweden)

    W. H. Swartz

    2012-07-01

    Full Text Available The 11-yr solar cycle in solar spectral irradiance (SSI inferred from measurements by the SOlar Radiation & Climate Experiment (SORCE suggests a much larger variation in the ultraviolet than previously accepted. We present middle atmosphere ozone and temperature responses to the solar cycles in SORCE SSI and the ubiquitous Naval Research Laboratory (NRL SSI reconstruction using the Goddard Earth Observing System chemistry-climate model (GEOSCCM. The results are largely consistent with other recent modeling studies. The modeled ozone response is positive throughout the stratosphere and lower mesosphere using the NRL SSI, while the SORCE SSI produces a response that is larger in the lower stratosphere but out of phase with respect to total solar irradiance above 45 km. The modeled responses in total ozone are similar to those derived from satellite and ground-based measurements, 3–6 Dobson Units per 100 units of 10.7-cm radio flux (F10.7 in the tropics. The peak zonal mean tropical temperature response using the SORCE SSI is nearly 2 K per 100 units F10.7 – 3 times larger than the simulation using the NRL SSI. The GEOSCCM and the Goddard Space Flight Center (GSFC 2-D coupled model are used to examine how the SSI solar cycle affects the atmosphere through direct solar heating and photolysis processes individually. Middle atmosphere ozone is affected almost entirely through photolysis, whereas the solar cycle in temperature is caused both through direct heating and photolysis feedbacks, processes that are mostly linearly separable. This is important in that it means that chemistry-transport models should simulate the solar cycle in ozone well, while general circulation models without coupled chemistry will underestimate the temperature response to the solar cycle significantly in the middle atmosphere. Further, the net ozone response results from the balance of ozone production at wavelengths less than 242 nm

  6. The U. S. Air Force Academy Solar Energy Research Project Summary Report.

    Science.gov (United States)

    1980-07-01

    Director, Colonel Wallac L. lutir, also deserves special praise for his support and leadership throughout the project. The author is also very grateful...subsu lrfalce piping primari ly for aesthetic reasons. ( I re <t Id be( p i Ven t o f rost I m e pe~net rat i on depthI and so i I mo i -;t ur cond i- t

  7. Project 5S: A Safe Stepping Stone into the Solar System

    Science.gov (United States)

    Brophy, John; Culick, Fred; Dimotakis, Paul; Friedman, Louis

    2012-01-01

    The human exploration program, at least in NASA, has been directed to move beyond the Moon and travel on a flexible path into the solar system. Reaching a Near-Earth Asteroid (NEA) is a major human space flight goal but such missions have tight times and life-support requirements that require huge steps from current capabilities. An objective between the Moon and a NEA is needed. Example interim objectives are the Lagrangian points in either the Sun-Earth or Earth-Moon (EM) system. The nearest of these points beyond the Moon is E-M L2. The Lagrangian points are empty (as far as we know). As objectives for human flight,it has been argued that they suffer from a lack of public interest and of meaningful objectives for astronaut operations. To provide a physical target, a robotic spacecraft could retrieve a small NEA and bring it to a Lagrangian or other nearer-Earth point to be accessed and utilized for human-mission objectives. This paper reports on the results of a recently completed study of an asteroid retrieval mission sponsored by the Keck Institute for Space Studies (KISS) at the California Institute of Technology. The study included an evaluation of potential targets, mission objectives, mission and system design, and potential capture mechanisms. The study concluded that, while challenging, there are no fundamental show stoppers and that such a mission would be possible with technology expected to be available in this decade. The final destination selected (for safety and mission operations) was high lunar orbit. Two options for target selection are considered: (i) retrieving a small (7 meter) NEA with a mass of order 500,000 kg, and (ii) taking a similar size boulder of a large known carbonaceous NEA. Several areas of technology and program requirements were identified, but the most important conclusion was that this approach enables meeting a goal of humans going to a NEA by the mid-2020s. The advantages and benefits for human exploration are considerable

  8. Solar energy research and development: program balance. Annex, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    Each of the seven solar energy technologies that have been assessed in the study are treated: photovoltaic devices, solar thermal power systems, wind energy systems, solar heating and cooling systems, agricultural and industrial heat processes, biomass conversion technologies, and ocean thermal energy conversion systems. A brief technical overview of storage for solar electric technologies is presented and some principles concerning how different levels of success on electrical storage can affect the commercial viability of solar electric options are discussed. A description is given of the solar penetration model that was developed and applied as an analytical tool in the study. This computer model has served the primary purpose of evaluating the competiveness of the solar energy systems in the markets in which they are expected to compete relative to that of the alternative energy sources. This is done under a variety of energy supply, demand, and price conditions. The seven sections treating the solar energy technologies contain discussions on each of six subject areas: description of the technology; economic projections; the potential contribution of the technology in different marketplaces; environmental considerations; international potential; and the present and possible future emphases within the RD and D program. The priority item for each of the technology sections has been the documentation of the economic projections.

  9. Final report for project "Next-Generation Semiconductors for Solar Photoelectrolysis"

    Energy Technology Data Exchange (ETDEWEB)

    Khalifah, Peter [Stony Brook Univ., NY (United States)

    2016-09-15

    In this paper, effective methods have been developed for preparing high-quality LaTiO2N films on conductive La5Ti5O17 substrates that can serve as photoanodes for photoelectrochemical water oxidation. One paper has been written by the post-doc who completed this comprehensive, interdisciplinary study, and it is presently being finalized for submission. Our approach to this system integrates expertise that we have developed in single crystal growth, thin film growth, and thin film post-processing. Through this work, LTON films have been fully optimized for light harvesting, as their band gap is optimally matched with the incident solar spectrum and the film thicknesses have been optimized based on the absolute absorption coefficients that we have measured for this system. The next step is to optimize the co-catalyst functionalization and the solution conditions to maximize the catalytic activity for water oxidation. Since the preliminary tests described here were done without a water oxidation co-catalyst, and since good water oxidation catalysts have previously been identified based on studies of powder samples, this next step is highly likely to be successful.

  10. Exploration of the Transition Region-Corona Interface With the Multi-Order Solar EUV Spectrograph Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to observe the solar upper transition region and lower corona in Ne VII 46.5 nm with the Multi-Order Solar EUV Spectrograph (MOSES) rocket payload. The...

  11. Highly Efficient InGaN-Based Solar Cells for High Intensity and High Temperature Operation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR Phase I program, we propose to fabricate high-efficiency and radiation hard solar cells based on InGaN material system that can cover the whole solar...

  12. Description and first results of a new solar cooker incorporating Non Imaging Optics (CPC type optics) and heat pipe technology; Descricao e primeiros resultados experimentals de um novo forno solar com colector CPC e tubos de calor

    Energy Technology Data Exchange (ETDEWEB)

    Collares-Pereira, M. P. I.; Farinha Mendes, J. A.; Pedro-Almeida, P. J. M.; Costa Leal, R. A.

    2004-07-01

    A new solar cooker incorporating Non Imaging Optics (CPC type optics) and heat pipe technology is presented in this work. A CPC collector concentrates solar radiation and the heat pipe transfers the energy from the CPC collector to the cooker. The energy can be delivered directly to the cooking pan or stored for subsequent use, for example, late in the afternoon. This device allows cooking inside the house and at the end of the day, which is not possible with conventional solar cookers. The use of different types of cooking pans is allowed and larger quantities of food can be cooked. The first experimental results show that this cooker is more effective than common solar cookers considering the energy storage and following delivery. (Author)

  13. 75 FR 2133 - Construction and Operation of the Quartzsite Solar Energy Project, La Paz County, AZ (DOE/EIS-0440)

    Science.gov (United States)

    2010-01-14

    ...-megawatt (MW) (net) solar-powered generating facility, consisting of a solar field of heliostat mirrors... proposes to construct a 100-MW (net), solar-powered electrical generation facility in La Paz County... tower'' technology to capture the sun's heat to make steam, which would power traditional steam turbine...

  14. The Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP): Overview and Description of Models, Simulations and Climate Diagnostics

    Science.gov (United States)

    Lamarque, J.-F.; Shindell, D. T.; Naik, V.; Plummer, D.; Josse, B.; Righi, M.; Rumbold, S. T.; Schulz, M.; Skeie, R. B.; Strode, S.; hide

    2013-01-01

    The Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP) consists of a series of time slice experiments targeting the long-term changes in atmospheric composition between 1850 and 2100, with the goal of documenting composition changes and the associated radiative forcing. In this overview paper, we introduce the ACCMIP activity, the various simulations performed (with a requested set of 14) and the associated model output. The 16 ACCMIP models have a wide range of horizontal and vertical resolutions, vertical extent, chemistry schemes and interaction with radiation and clouds. While anthropogenic and biomass burning emissions were specified for all time slices in the ACCMIP protocol, it is found that the natural emissions are responsible for a significant range across models, mostly in the case of ozone precursors. The analysis of selected present-day climate diagnostics (precipitation, temperature, specific humidity and zonal wind) reveals biases consistent with state-of-the-art climate models. The model-to- model comparison of changes in temperature, specific humidity and zonal wind between 1850 and 2000 and between 2000 and 2100 indicates mostly consistent results. However, models that are clear outliers are different enough from the other models to significantly affect their simulation of atmospheric chemistry.

  15. System design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

    Energy Technology Data Exchange (ETDEWEB)

    Truitt, R.W. [Westinghouse Hanford Co., Richland, WA (United States); Pounds, T.S.; Smith, S.O. [EG and G Energy Measurements, Inc., Las Vegas, NV (United States)

    1994-08-24

    This document describes the hardware subsystems of the data acquisition and control system (DACS) used in mitigation tests conducted on waste tank SY-101 at the Hanford Nuclear Reservation. The system was designed and implemented by Los Alamos National Laboratory (LANL) and supplied to Westinghouse Hanford Company (WHC). The mitigation testing uses a pump immersed in the waste tank, directed at certain angles and operated at different speeds and time durations. The SY-101 tank has experienced recurrent periodic gas releases of hydrogen, nitrous oxide, ammonia, and (recently discovered) methane. The hydrogen gas represents a danger, as some of the releases are in amounts above the lower flammability limit (LFL). These large gas releases must be mitigated. Several instruments have been added to the tank to monitor the gas compositions, the tank level, the tank temperature, and other parameters. A mixer pump has been developed to stir the tank waste to cause the gases to be released at a slow rate. It is the function of the DACS to monitor those instruments and to control the mixer pump in a safe manner. During FY93 and FY94 the mixer pump was installed with associated testing operations support equipment and a mitigation test project plan was implemented. These activities successfully demonstrated the mixer pump`s ability to mitigate the SY-101 tank hydrogen gas hazard.

  16. The Fire Modeling Intercomparison Project (FireMIP), phase 1: experimental and analytical protocols with detailed model descriptions

    Science.gov (United States)

    Rabin, Sam S.; Melton, Joe R.; Lasslop, Gitta; Bachelet, Dominique; Forrest, Matthew; Hantson, Stijn; Kaplan, Jed O.; Li, Fang; Mangeon, Stéphane; Ward, Daniel S.; Yue, Chao; Arora, Vivek K.; Hickler, Thomas; Kloster, Silvia; Knorr, Wolfgang; Nieradzik, Lars; Spessa, Allan; Folberth, Gerd A.; Sheehan, Tim; Voulgarakis, Apostolos; Kelley, Douglas I.; Prentice, I. Colin; Sitch, Stephen; Harrison, Sandy; Arneth, Almut

    2017-03-01

    The important role of fire in regulating vegetation community composition and contributions to emissions of greenhouse gases and aerosols make it a critical component of dynamic global vegetation models and Earth system models. Over 2 decades of development, a wide variety of model structures and mechanisms have been designed and incorporated into global fire models, which have been linked to different vegetation models. However, there has not yet been a systematic examination of how these different strategies contribute to model performance. Here we describe the structure of the first phase of the Fire Model Intercomparison Project (FireMIP), which for the first time seeks to systematically compare a number of models. By combining a standardized set of input data and model experiments with a rigorous comparison of model outputs to each other and to observations, we will improve the understanding of what drives vegetation fire, how it can best be simulated, and what new or improved observational data could allow better constraints on model behavior. In this paper, we introduce the fire models used in the first phase of FireMIP, the simulation protocols applied, and the benchmarking system used to evaluate the models. We have also created supplementary tables that describe, in thorough mathematical detail, the structure of each model.

  17. Developing community-based preventive interventions in Hong Kong: a description of the first phase of the family project

    Directory of Open Access Journals (Sweden)

    Stewart Sunita M

    2012-02-01

    Full Text Available Abstract Background This paper describes the development of culturally-appropriate family-based interventions and their relevant measures, to promote family health, happiness and harmony in Hong Kong. Programs were developed in the community, using a collaborative approach with community partners. The development process, challenges, and the lessons learned are described. This experience may be of interest to the scientific community as there is little information currently available about community-based development of brief interventions with local validity in cultures outside the West. Methods The academic-community collaborative team each brought strengths to the development process and determined the targets for intervention (parent-child relationships. Information from expert advisors and stakeholder discussion groups was collected and utilized to define the sources of stress in parent-child relationships. Results Themes emerged from the literature and discussion groups that guided the content of the intervention. Projects emphasized features that were appropriate for this cultural group and promoted potential for sustainability, so that the programs might eventually be implemented at a population-wide level. Challenges included ensuring local direction, relevance and acceptability for the intervention content, engaging participants and enhancing motivation to make behavior changes after a brief program, measurement of behavior changes, and developing an equal partner relationship between academic and community staff. Conclusions This work has public health significance because of the global importance of parent-child relationships as a risk-factor for many outcomes in adulthood, the need to develop interventions with strong evidence of effectiveness to populations outside the West, the potential application of our interventions to universal populations, and characteristics of the interventions that promote dissemination, including minimal

  18. New Solar System Researches expected by a New Telescope Project at Mt. Haleakala, Hawaii

    Science.gov (United States)

    Kagitani, Masato; Okano, S.; Kasaba, Y.; Kuhn, J.; Berdyugina, S.

    2009-09-01

    We Tohoku University starts the project for the new ground-based telescope dedicated to planets and exoplanets, in collaboration with the Institute for Astronomy of University of Hawaii(IfA/UH) and ETH Zurich. The summit of Mt. Haleakala in Maui, Hawaii is one of the best sites with clear skies, good seeing, and low humidity conditions as well as good accessibility despite its high altitude (elv. 3,000m). Haleakala High Altitude Observatory is operated by IfA/UH, and we have been making observation of planets there since 2000. Currently, our observation facility consists of a 40cm telescope. We have been making observations of faint atmospheric and plasma features around bright planets, Io plasma torus, Mercury and Lunar sodium tail, and so on. Atmospheric escapes from Mars and Venus, the exoplanets close to mother stars are also possible future important topics. When we try to observe those faint emissions surrounding the bright objects, intense scattered light causes a serious problem. The new telescope shall avoid the diffraction due to a spider structure that holds a secondary mirror and to minimize the scattered light from mirror surfaces as far as possible. Such telescope with a wide dynamic range dedicated to planetary and exoplanetary sciences does not exist yet. The project, called PLANETS (Poralized Light from Atmospheres of Nearby Extra Terrestrial Planets), develops a new telescope (tentatively named as JHET; Japan Hawaii Europe Telescope) which consists of an off-axis primary mirror with a diameter of 1.8m, and Gregorian optics on an equatorial mount. State-of-art adaptive optics and masking technologies will also be adopted to eliminate the scattering light. This telescope will enables us to do spectro-polarimetric observations and faint plasma and atmospheres around the bright bodies. We will introduce the progress of our ground-based observations and the future plan involving the wide area of the international communities.

  19. The National Neurosurgery Quality and Outcomes Database (N2QOD): general overview and pilot-year project description.

    Science.gov (United States)

    McGirt, Matthew J; Speroff, Theodore; Dittus, Robert S; Harrell, Frank E; Asher, Anthony L

    2013-01-01

    Given the unsustainable costs of US health care, universal agreement exists among payers, regulatory agencies, and other health care stakeholders that reform must include substantial improvements in the quality, effectiveness, and value of health care delivery. The Institute of Medicine and the American Recovery and Reinvestment Act of 2009 have called for the establishment of prospective registries to capture patient-centered data from real-world practice as a high priority to guide evidence-based reform. As a result, the American Association of Neurological Surgeons launched the National Neurosurgery Quality and Outcomes Database (N(2)QOD) and began enrolling patients in March 2012 into its initial pilot project: a web-based lumbar spine module. As a nationwide, prospective longitudinal registry utilizing patient reported outcome instruments, the N(2)QOD lumbar spine surgery pilot aims to systematically measure and aggregate surgical safety and 1-year postoperative outcome data from approximately 30 neurosurgical practices across the US with the primary aim of demonstrating the feasibility and validity of standardized 1-year outcome measurement from everyday real-world practice. At the end of the pilot year, 1) risk-adjusted modeling will be developed for the safety, quality, and effectiveness of lumbar surgical care (morbidity, readmission, improvements in pain, disability, quality of life, and return to work); 2) data integrity and validation will be demonstrated via internal quality control analyses and auditing, and 3) the feasibility of obtaining a high level of follow-up (~80%) of nationwide 1-year outcome measurement will be established. N(2)QOD will use only prospective clinical data, will avoid the use of administrative data proxies, and will rely on neurosurgically relevant risk factors for risk adjustment. Once national benchmarks of quality and effectiveness are accurately established and validated utilizing practice-based data extractors in the pilot

  20. Constructed wetlands and solar-driven disinfection technologies for sustainable wastewater treatment and reclamation in rural India: SWINGS project.

    Science.gov (United States)

    Álvarez, J A; Ávila, C; Otter, P; Kilian, R; Istenič, D; Rolletschek, M; Molle, P; Khalil, N; Ameršek, I; Mishra, V K; Jorgensen, C; Garfi, A; Carvalho, P; Brix, H; Arias, C A

    2017-09-01

    SWINGS was a cooperation project between the European Union and India, aiming at implementing state of the art low-cost technologies for the treatment and reuse of domestic wastewater in rural areas of India. The largest wastewater treatment plant consists of a high-rate anaerobic system, followed by vertical and horizontal subsurface flow constructed wetlands with a treatment area of around 1,900 m 2 and a final step consisting of solar-driven anodic oxidation (AO) and ultraviolet (UV) disinfection units allowing direct reuse of the treated water. The implementation and operation of two pilot plants in north (Aligarh Muslim University, AMU) and central India (Indira Gandhi National Tribal University, IGNTU) are shown in this study. The overall performance of AMU pilot plant during the first 7 months of operation showed organic matter removal efficiencies of 87% total suspended solids, 95% 5-day biological oxygen demand (BOD 5 ) and 90% chemical oxygen demand, while Kjeldahl nitrogen removal reached 89%. The UV disinfection unit produces water for irrigation and toilet flushing with pathogenic indicator bacteria well below WHO guidelines. On the other hand, the AO disinfection unit implemented at IGNTU and operated for almost a year has been shown to produce an effluent of sufficient quality to be reused by the local population for agriculture and irrigation.

  1. An Assessment of Water Demand and Availability to meet Construction and Operational Needs for Large Utility-Scale Solar Projects in the Southwestern United States

    Science.gov (United States)

    Klise, G. T.; Tidwell, V. C.; Macknick, J.; Reno, M. D.; Moreland, B. D.; Zemlick, K. M.

    2013-12-01

    In the Southwestern United States, there are many large utility-scale solar photovoltaic (PV) and concentrating solar power (CSP) facilities currently in operation, with even more under construction and planned for future development. These are locations with high solar insolation and access to large metropolitan areas and existing grid infrastructure. The Bureau of Land Management, under a reasonably foreseeable development scenario, projects a total of almost 32 GW of installed utility-scale solar project capacity in the Southwest by 2030. To determine the potential impacts to water resources and the potential limitations water resources may have on development, we utilized methods outlined by the Bureau of Land Management (BLM) to determine potential water use in designated solar energy zones (SEZs) for construction and operations & maintenance (O&M), which is then evaluated according to water availability in six Southwestern states. Our results indicate that PV facilities overall use less water, however water for construction is high compared to lifetime operational water needs. There is a transition underway from wet cooled to dry cooled CSP facilities and larger PV facilities due to water use concerns, though some water is still necessary for construction, operations, and maintenance. Overall, ten watersheds, 9 in California, and one in New Mexico were identified as being of particular concern because of limited water availability. Understanding the location of potentially available water sources can help the solar industry determine locations that minimize impacts to existing water resources, and help understand potential costs when utilizing non-potable water sources or purchasing existing appropriated water. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract

  2. THE PHOENIX PROJECT: SHIFTING TO A SOLAR HYDROGEN ECONOMY BY 2020

    Directory of Open Access Journals (Sweden)

    HARRY BRAUN

    2008-07-01

    Full Text Available The most serious energy, economic and environmental problems are related to the use of fossil and nuclear fuels, which are rapidly diminishing and highly polluting, and many distinguished atmospheric chemists, including Dr. James Hanson at NASA, Dr. Steven Chu, the director of Lawrence Livermore Laboratory, and Professor Ralph Cicerone, president of the National Academy of Sciences have documented that climate changes are now occurring much faster than predicted just a few years ago. The methane hydrates in the oceans and the permafrost in vast areas of the Artic regions of Siberia, Alaska and Canada are now starting to rapidly melt, and given this could release 50 to 100 times more carbon into the atmosphere than is now generated from the burning of fossil fuels, humanity is rapidly approaching an exponential “tipping point” of no return. Given this sense of urgency, Hanson and others have warned that fossil fuels need to be phased-out by 2020 if irreversible damage to the earth’s climate and food production systems is to be avoided. The Phoenix Project plan seeks to do exactly that by mass-producing wind-powered hydrogen production systems and simply modifying all the existing vehicles and power plants to use the hydrogen made from the sun, wind and water.

  3. Demonstration of domestic hot water with combination of wood stove hot water (winter) and homemade solar collector (summer). Final project report

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, N.S. II

    1981-09-03

    The purpose of this project was to demonstrate that adequate hot water can be provided for a family of four in northeastern Pennsylvania, by using a combination of wood stove hot water in the winter and solar collector hot water during the non-heating months. This demonstration would be to encourage other people in the area to investigate using similar energy-saving systems, by providing an observable operating installation, and by increasing their confidence in using simple alternate-energy sources.

  4. The high accuracy model of the 19 July 2012 solar flare: kinetic description, calculations of X-Ray and microwave emission

    Science.gov (United States)

    Gritsyk, Pavel; Somov, Boris

    2016-04-01

    The limb white-light solar flare M7.7 class was observed at the 19 July 2012 at 05:58UT by RHESSI, GOES and SDO with high spectral, spatial and temporal resolution. These new data make possible to test modern models of solar flares. The flare, which considered here, locates in the picture plane, so we well see two different hard X-ray sources: footpoint and above-the-loop-top. The loop was observed in whit-light and microwave wavelengths. The key part of the presented work is high accuracy kinetic model, which describe behavior of electrons in the target - solar flare loop. We interpret the footpoint source in approximation of the thick target model with reverse current and above-the-loop-top source - in the thin target approximation. The microwave spectrum in the range from 1 to 50 GHz was calculated. Our results fit well the observational data, particularly so important parameter as hard X-Ray spectral index. But intensity of emission of the coronal source was estimated incorrect, it was low than observed. This problem can be solved by taking into account effects of particles acceleration in the collapsing magnetic trap, when fast electrons receive additional energy without changing the index of their energy spectrum. In the result we have flux ~ 5 1010 erg cm-2 s-1 for electrons with energies more then 15 keV, that ~ 5 times larger then in the case classical thick target model. Accordingly , so high flux of electrons to the Chromosphere provides effective heating of the cold plasma in the target, but the reverse current electric field restrict depth of the electron penetration. Received in this work estimates may be used for interpretation of the solar flare optical source formation and evolution.

  5. Analysis and evaluation in the production process and equipment area of the low-cost solar array project

    Science.gov (United States)

    Wolf, M.

    1981-01-01

    The effect of solar cell metallization pattern design on solar cell performance and the costs and performance effects of different metallization processes are discussed. Definitive design rules for the front metallization pattern for large area solar cells are presented. Chemical and physical deposition processes for metallization are described and compared. An economic evaluation of the 6 principal metallization options is presented. Instructions for preparing Format A cost data for solar cell manufacturing processes from UPPC forms for input into the SAMIC computer program are presented.

  6. Projects from Federal Region IX: Department of Energy Appropriate Energy Technology Program. Part II

    Energy Technology Data Exchange (ETDEWEB)

    Case, C.W.; Clark, H.R.; Kay, J.; Lucarelli, F.B.; Rizer, S.

    1980-01-01

    Details and progress of appropriate energy technology programs in Region IX are presented. In Arizona, the projects are Solar Hot Water for the Prescott Adult Center and Solar Prototype House for a Residential Community. In California, the projects are Solar AquaDome Demonstration Project; Solar Powered Liquid Circulating Pump; Appropriate Energy Technology Resource Center; Digester for Wastewater Grown Aquatic Plants; Performance Characteristics of an Anaerobic Wastewater Lagoon Primary Treatment System; Appropriate Energy/Energy Conservation Demonstration Project; Solar Energy for Composting Toilets; Dry Creek Rancheria Solar Demonstration Projects; Demonstration for Energy Retrofit Analysis and Implementation; and Active Solar Space Heating System for the Integral Urban House. In Hawaii, the projects are: Java Plum Electric; Low-Cost Pond Digesters for Hawaiian Pig Farm Energy Needs; Solar Beeswax Melter; Methane Gas Plant for Operating Boilers and Generating Steam; and Solar Water Heating in Sugarcane Seed-Treatment Plants. A Wind-Powered Lighted Navigation Buoys Project for Guam is also described. A revised description of the Biogas Energy for Hawaiian Small Farms and Homesteads is given in an appendix.

  7. New York Solar Smart DG Hub-Resilient Solar Project: Economic and Resiliency Impact of PV and Storage on New York Critical Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Kate; Burman, Kari; Simpkins, Travis; Helson, Erica; Lisell, Lars, Case, Tria

    2016-06-01

    Resilient PV, which is solar paired with storage ('solar-plus-storage'), provides value both during normal grid operation and power outages as opposed to traditional solar PV, which functions only when the electric grid is operating. During normal grid operations, resilient PV systems help host sites generate revenue and/or reduce electricity bill charges. During grid outages, resilient PV provides critical emergency power that can help people in need and ease demand on emergency fuel supplies. The combination of grid interruptions during recent storms, the proliferation of solar PV, and the growing deployment of battery storage technologies has generated significant interest in using these assets for both economic and resiliency benefits. This report analyzes the technical and economic viability for resilient PV on three critical infrastructure sites in New York City (NYC): a school that is part of a coastal storm shelter system, a fire station, and a NYCHA senior center that serves as a cooling center during heat emergencies. This analysis differs from previous solar-plus-storage studies by placing a monetary value on resiliency and thus, in essence, modeling a new revenue stream for the avoided cost of a power outage. Analysis results show that resilient PV is economically viable for NYC's critical infrastructure and that it may be similarly beneficial to other commercial buildings across the city. This report will help city building owners, managers, and policymakers better understand the economic and resiliency benefits of resilient PV. As NYC fortifies its building stock against future storms of increasing severity, resilient PV can play an important role in disaster response and recovery while also supporting city greenhouse gas emission reduction targets and relieving stress to the electric grid from growing power demands.

  8. Construction of a Model Solar Building. A Learning Experience for Coastal and Oceanic Awareness Studies, No. 318. [Project COAST].

    Science.gov (United States)

    Delaware Univ., Newark. Coll. of Education.

    This activity is designed for secondary school students. The process of constructing a model solar building includes consideration of many fundamental scientific principles, such as the nature of heat, light, electricity, and energy conversion technology. When the model solar building is completed, there are numerous possibilities for the use of…

  9. Projecte d’una instal•lació solar fotovoltaica per a un sistema de bombes de reg

    OpenAIRE

    Batllori Alvarez, Eduard

    2009-01-01

    Instal.lació d’una explotació agrícola amb funcionament per energia solar fotovoltaica a Torregrossa (Tarragona). Disseny i definició de les parts necessàries que conformaran la instal•lació solar fotovoltaica que subministrarà energia elèctrica a les bombes de reg

  10. Consumer providers' experiences of recovery and concerns as members of a psychiatric multidisciplinary outreach team: A qualitative descriptive study from the Japan Outreach Model Project 2011-2014.

    Directory of Open Access Journals (Sweden)

    Yoshifumi Kido

    Full Text Available The objective of this study was to clarify consumer providers (CPs subjective experiences as members of a psychiatric multidisciplinary outreach team that provided services to individuals with a mental illness living in the community.A qualitative descriptive study was conducted through semi-structured interviews. Participants were clients hired as CPs in the Japanese Outreach Model Project from September 2011 until March 2014. Of the seventeen CPs, nine participated in this study. We looked at the CPs' subjective experiences of fulfillment and difficulty.In the process of providing services, CPs experienced both achievements and concerns. They had a sense of achievement by caring for their clients and they experienced that they themselves were recovering. They were also concerned about having inadequate knowledge and skills to provide psychiatric services to their clients. Further, there were concerns about their dual role on the multidisciplinary team and being support staff while they were still using mental health services themselves.The results show that the activities of CPs included fulfillment, recovery, and dilemmas. Clarifications will likely contribute to an increase in understanding and cooperation between CPs and other professionals with whom they work. Further studies are needed to investigate policies related to mental health consumers who are also providers of mental health services.

  11. Origins and Formation of Solar Wind Transients 4 -- 7 August 2011. General Description of the Complex Event and Ion Charge State Evolution

    CERN Document Server

    Rodkin, D; Pagano, P; Gibb, G; Slemzin, V; Shugay, Yu; Veselovsky, I; Mackay, D H

    2016-01-01

    We present a case study of a complex event consisting of several solar wind transients detected by ACE on 4 -- 7 August 2011 which caused the geomagnetic storm with Dst = -115 nT, and their supposed coronal sources - three flares and coronal mass ejections (CMEs) occurred on 2 -- 4 August 2011 in AR 11261. To investigate the solar origins and formation of these transients we studied kinematic and thermodynamic properties of expanding coronal structures using the SDO/AIA EUV images and the differential emission measure (DEM) diagnostics. The Helioseismic and Magnetic Imager (HMI) magnetic field maps were used as the input data for the 3D magnetohydrodynamics (MHD) model to describe the flux rope ejection. We characterize the early phase of a flux rope ejection in the corona, where the usual three component structure is formed, the flux rope is ejected with the velocity at about 200 km $s^{-1}$ to the height of 186 Mm. The kinematics of the modeled CME front well agreed with the STEREO EUV measurements. Using t...

  12. Movie Description

    OpenAIRE

    Rohrbach, A; A Torabi; Rohrbach, M.; Tandon, N.; C.; Pal; Larochelle, H; Courville, A.; Schiele, B.

    2017-01-01

    Audio Description (AD) provides linguistic descriptions of movies and allows visually impaired people to follow a movie along with their peers. Such descriptions are by design mainly visual and thus naturally form an interesting data source for computer vision and computational linguistics. In this work we propose a novel dataset which contains transcribed ADs, which are temporally aligned to full length movies. In addition we also collected and aligned movie scripts used in prior work and co...

  13. Niobium Solar Mobile Project — High Strength Niobium Microalloyed Steel as a Solution to Improve Electric Super Scooter and Motorcycle Performance

    Science.gov (United States)

    Richards, Terry; Kauppi, Erik; Flanagan, Lauren; Ribeio, Eduardo A. A. G.; Nogueira, Marcos A. Stuart; McCourtney, Ian

    This paper presents the advantages of replacing mild steel with high strength niobium microalloyed steel in the structure of Electric Super Scooters, Electric Cargo Motorcycles and Solar Charging Stations. The Mini-Fleet-in-a-Box concept was developed by Current Motor to guarantee mobility, efficiency and solar generated electricity. With the adoption of niobium microalloyed high strength steel for more than 90% of the Super Scooter and Motorcycle structures, it was possible to redesign the frame, resulting in a 31% weight reduction and a very modern and functional body. Together with a new powertrain, these changes were responsible for increasing Motorcycle autonomy by more than 15%, depending on average speed. The new frame design reduced the number of high strain points in the frame, increasing the safety of the project. The Solar Charging Station was built using the container concept and designed with high strength niobium microalloyed steel, which resulted in a weight reduction of 25%. CBMM's facility in Araxá, Brazil was selected in the second half of 2013 as the demonstration site to test the efficiency of the Super Scooter and Solar Charging Station. Each Super Scooter has run more than 2,000 km maintenance-free with an autonomy of more than 100 km per charge.

  14. Solar energy alternatives for the United States Embassy and for rural development projects within the Republic of Upper Volta

    Energy Technology Data Exchange (ETDEWEB)

    Kern, E.C. Jr.

    1978-03-07

    This report is organized in three sections/: solar cooling options for the new Embassy office building, electrification of Fada N' Gourma using solar photovolatic versus conventional energy systems and an overview of the potential for village solar photovoltaic energy utilization in Upper Volta. The analysis indicates that the least-cost alternative for cooling the new offices is to modify existing plans, which call for standard electric room air conditioning units, and to incorporate energy conservation measures in the building construction and operation.

  15. High-Volume Production of Lightweight, Multi-Junction Solar Cells Using 6-inch GaAs Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In the proposed Phase II program, we will transition MicroLink's 6-inch epitaxial lift-off (ELO) solar cell fabrication process into a manufacturing platform capable...

  16. Report of the George A. Towns Elementary School solar heating and cooling project, Atlanta, Georgia. United States special format report

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    The design, construction, and performance analysis of an experimental solar heating and cooling system to accommodate a building of approximately 3,000 m/sup 2/ in area are described. The objectives of the experiment are to: make a significant contribution to solar design, technology, and acceptability; conduct an advanced experiment on an integrated large-scale solar heating and cooling system, determine its performance, reliability, and maintainability, and compare these actual results with predicted performance; identify subsystem interface problems that cannot adequately be predicted by theoretical analysis; operationally test major components and identify improvements required; and identify cost reducing materials and techniques which may improve the economic viability of solar heating and cooling systems. (WDM)

  17. AN LED-BASED SOLAR SIMULATOR FOR RESEARCH, DEVELOPMENT, AND TESTING OF PHOTOVOLTAIC SPACE POWER SYSTEMS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar cells are the critical power source for the majority of space missions. The advancement from single junction silicon cells to current, state-of-the-art, triple...

  18. Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 2. System performance and supporting studies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1979-01-01

    The preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas, is presented. System performance analysis and evaluation are described. Feedback of completed performance analyses on current system design and operating philosophy is discussed. The basic computer simulation techniques and assumptions are described and the resulting energy displacement analysis is presented. Supporting technical studies are presented. These include health and safety and reliability assessments; solar collector component evaluation; weather analysis; and a review of selected trade studies which address significant design alternatives. Additional supporting studies which are generally specific to the installation site are reported. These include solar availability analysis; energy load measurements; environmental impact assessment; life cycle cost and economic analysis; heat transfer fluid testing; meteorological/solar station planning; and information dissemination. (WHK)

  19. National Community Solar Platform

    Energy Technology Data Exchange (ETDEWEB)

    Rupert, Bart [Clean Energy Collective, Louisville, CO (United States)

    2016-06-30

    This project was created to provide a National Community Solar Platform (NCSP) portal known as Community Solar Hub, that is available to any entity or individual who wants to develop community solar. This has been done by providing a comprehensive portal to make CEC’s solutions, and other proven community solar solutions, externally available for everyone to access – making the process easy through proven platforms to protect subscribers, developers and utilities. The successful completion of this project provides these tools via a web platform and integration APIs, a wide spectrum of community solar projects included in the platform, multiple groups of customers (utilities, EPCs, and advocates) using the platform to develop community solar, and open access to anyone interested in community solar. CEC’s Incubator project includes web-based informational resources, integrated systems for project information and billing systems, and engagement with customers and users by community solar experts. The combined effort externalizes much of Clean Energy Collective’s industry-leading expertise, allowing third parties to develop community solar without duplicating expensive start-up efforts. The availability of this platform creates community solar projects that are cheaper to build and cheaper to participate in, furthering the goals of DOE’s SunShot Initiative. Final SF 425 Final SF 428 Final DOE F 2050.11 Final Report Narrative

  20. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  1. Ultrahigh Efficiency Multiband Solar Cells Final Report forDirector's Innovation Initiative Project DII-2005-1221

    Energy Technology Data Exchange (ETDEWEB)

    Ager III, Joel W.; Walukiewicz, W.; Yu, Kin Man

    2006-03-29

    The unique properties of the semiconductor ZnTeO were explored and developed to make multiband solar cells. Like a multijunction cell, multiband solar cells use different energy gaps to convert the majority of the solar spectrum to electrical current while minimizing losses due to heating. Unlike a multijunction cell, this is accomplished within a single material in a multiband cell. ZnTe{sub 1-x}O{sub x} films with x up to 2% were synthesized and shown to have the requisite unique band structure (2 conduction bands) for multiband function. Prototype solar cells based on an n-type ZnTe{sub 1-x}O{sub x} multiband top layer and a p-type ZnTe substrate were fabricated. Contacts to the cell and the series resistance of the substrate were identified as challenges for good electrical performance. Both photovoltage and small photocurrents were demonstrated under AMO illumination. A second semiconductor system, GaN{sub x}As{sub 1-y-x}P{sub y}, was shown to have multiband function. This alloy system may have the greatest potential to realize the promise of high efficiency multiband solar cells because of the relatively advanced technology base that exists for the manufacturing of III-V-alloy-based IC and opto-electronic devices (including multijunction solar cells).

  2. Investigation of test methods, material properties, and processes for solar cell encapsulants. Encapsulation task of the Low-Cost Silicon Solar Array project. Thirteenth quarterly progress report, May 12, 1979-August 12, 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    Springborn Laboratories is engaged in a study of evaluating potentially useful encapsulating materials for Task 3 of the Low-Cost Silicon Solar Array project (LSA) funded by DOE. The goal of this program is to identify, evaluate, and recommend encapsulant materials and processes for the product of cost-effective, long-life solar cell modules. Current technical activities are directed primarily towards the development of a solar module encapsulation technology that employs ethylene/vinyl acetate copolymer as the pottant. Due to the surface tack of EVA, a slip sheet of release paper is required between each layer to prevent the plies from adhering. Manufacturers were surveyed and a source for inexpensive release paper in roll form was identified. A survey of separator materials was also conducted. Corrosion studies using a standard salt spray test were used to determine the degree of protection offered to a variety of metals by encapsulation in EVA pottant. Due to the low surface hardness of EVA and the remaining sensitivity to ultraviolet light, outer covers are required to prevent soiling and improve the weatherability. Two candidate films (Korad 212 and Tedlar UT) have been identified for this function. These films are somewhat scratch and abrasion sensitive, however, and their useful life can be prolonged with the application of thin layers of abrasion resistant hard coats. A survey of manufacturers of these coatings was performed and the products compared. Field trials of outdoor performance must be performed to fully assess the durability of these coatings.

  3. Electricity from photovoltaic solar cells. Flat-Plate Solar Array Project of the US Department of Energy's National Photovoltaics Program: 10 years of progress

    Science.gov (United States)

    Christensen, Elmer

    1985-01-01

    The objectives were to develop the flat-plate photovoltaic (PV) array technologies required for large-scale terrestrial use late in the 1980s and in the 1990s; advance crystalline silicon PV technologies; develop the technologies required to convert thin-film PV research results into viable module and array technology; and to stimulate transfer of knowledge of advanced PV materials, solar cells, modules, and arrays to the PV community. Progress reached on attaining these goals, along with future recommendations are discussed.

  4. Project, fabrication, assembly and tests of different prototypes for CPS compound parabolic solar collectors; Projeto, fabricacao, montagem e testes de diferentes prototipos de coletores solares parabolicos compostos CPCs

    Energy Technology Data Exchange (ETDEWEB)

    Neto, Jose H.M. [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET), Belo Horizonte, MG (Brazil). Dept. de Engenharia Mecanica]. E-mail: henrique@daem.des.cefemg.br

    2000-07-01

    This work presents the results of the experiment involving the design, fabrication, assembly and tests of composite parabolic solar collectors prototypes with acceptance half-angles of 3 deg C, 6.5 deg C, 11 deg C, 14 deg C and 19.5 deg C of the tube type absorber and 14 deg C rectangular absorber. Field test were performed on all the prototypes for determination of thermal efficiency, time constants and optical efficiencies represented by the modified incidence angles. Tests were performed for the determination of the heat transfer global coefficients on each prototype. (author)

  5. Hydrogen production by solar energy. Final report of the integrated project HYSOL (2002-2004); Production d'hydrogene par energie solaire. Rapport Final du Projet Integre HYSOL (2002-2004)

    Energy Technology Data Exchange (ETDEWEB)

    Flamant, G.

    2004-07-01

    The HYSOL project aims to study three thermal processes using the solar energy at temperatures of more than 1000 C: hydrocarbons cracking, non catalytic reforming at high temperature and water decomposition by thermal-chemical cycles. This report presents the HYSOL project and the main results and gives a special part to the methane cracking. (A.L.B.)

  6. Analysis of space environment damage to solar cell assemblies from LDEF experiment A0171-GSFC test plate

    Science.gov (United States)

    Hill, David C.; Rose, M. Frank

    1994-09-01

    The results of the postflight analysis of the solar cell assemblies from the LDEF (Long Duration Exposure facility) experiment A0171 is provided in this NASA sponsored research project. The following data on this research are provided as follows: (1) solar cell description, including, substrate composition and thickness, crystal orientation, anti-reflective coating composition and thickness; (2) preflight characteristics of the solar cell assemblies with respect to current and voltage; and (3) post-flight characteristics of the solar cell assemblies with respect to voltage and current. These solar cell assemblies are part of the Goddard Space Flight Center test plate which was designed to test the space environment effects (radiation, atomic oxygen, thermal cycling, meteoroid and debris) on conductively coated solar cell coversheets, various electrical bond materials, solar cell performance, and other material properties where feasible.

  7. Descriptive statistics.

    Science.gov (United States)

    Shi, Runhua; McLarty, Jerry W

    2009-10-01

    In this article, we introduced basic concepts of statistics, type of distributions, and descriptive statistics. A few examples were also provided. The basic concepts presented herein are only a fraction of the concepts related to descriptive statistics. Also, there are many commonly used distributions not presented herein, such as Poisson distributions for rare events and exponential distributions, F distributions, and logistic distributions. More information can be found in many statistics books and publications.

  8. Solar Pilot Plant, Phase I. Preliminary design report. Volume II, Book 3. Dynamic simulation model and computer program descriptions. CDRL item 2. [SPP dynamics simulation program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    The mathematical models and computer program comprising the SPP Dynamic Simulation are described. The SPP Dynamic Simulation is a computerized model representing the time-varying performance characteristics of the SPP. The model incorporates all the principal components of the pilot plant. Time-dependent direct normal solar insulation, as corrupted by simulated cloud passages, is transformed into absorbed radiant power by actions of the heliostat field and enclosed receiver cavity. The absorbed power then drives the steam generator model to produce superheated steam for the turbine and/or thermal storage subsystems. The thermal storage subsystem can, in turn, also produce steam for the turbine. The turbine using the steam flow energy produces the mechanical shaft power necessary for the generator to convert it to electrical power. This electrical power is subsequently transmitted to a transmission grid system. Exhaust steam from the turbine is condensed, reheated, deaerated, and pressurized by pumps for return as feedwater to the thermal storage and/or steam generator. A master control/instrumentation system is utilized to coordinate the various plant operations. The master controller reacts to plant operator demands and control settings to effect the desired output response. The SPP Dynamic Simulation Computer program is written in FORTRAN language. Various input options (e.g., insolation values, load demands, initial pressures/temperatures/flows) are permitted. Plant performance may be monitored via computer printout or computer generated plots. The remainder of this document describes the detailed pilot plant dynamic model, the basis for this simulation, and the utilization of this simulation to obtain analytical plant performance results.

  9. Middle East and North Africa Region Assessment of the Local Manufacturing Potential for Concentrated Solar Power (CSP) Projects

    Energy Technology Data Exchange (ETDEWEB)

    Gazzo, A.; Gousseland, P.; Verdier, J. [Ernst and Young et Associes, Neuilly-Sur-Seine (France); Kost, C.; Morin, G.; Engelken, M.; Schrof, J.; Nitz, P.; Selt, J.; Platzer, W. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg (Germany); Ragwitz, M.; Boie, I.; Hauptstock, D.; Eichhammer, W. [Fraunhofer Institute for Systems and Innovation Research ISI, Karlsruhe (Germany)

    2011-01-15

    The MENA CSP (Middle East and North Africa - Concentrated Solar Power) plan is an ambitious scheme with an appeal to anyone concerned about climate change and convinced by the need for clean, renewable power. But what does it really mean for the average citizen of say Morocco or Tunisia? The World Bank sees potential for significant job and wealth creation in solar energy producing countries. If the CSP market grows rapidly over the next few years, equipment manufacturing will be essential to supply this new sector. This study proposes roadmaps and an action plan to help develop the potential of locally manufactured CSP components in the existing industry and for new market entrants.

  10. Basics of Solar Heating & Hot Water Systems.

    Science.gov (United States)

    American Inst. of Architects, Washington, DC.

    In presenting the basics of solar heating and hot water systems, this publication is organized from the general to the specific. It begins by presenting functional and operational descriptions of solar heating and domestic hot water systems, outlining the basic concepts and terminology. This is followed by a description of solar energy utilization…

  11. The Serso Project - Solar energy seasonal storage for the defrosting of a road bridge; Projet Serso, stockage saisonnier solaire pour le degivrage d'un pont

    Energy Technology Data Exchange (ETDEWEB)

    Pahud, D.

    2005-12-15

    This is the annual report 2005 of the Serso project. The basic idea of the Serso project is to defrost a road bridge in winter with heat produced by the bridge in summer by solar radiation absorption and stored in a diffusive underground store. Pipes are incorporated into the bridge surface material and connected to a set of underground borehole heat exchangers ('geothermal probes'). A heat transfer fluid is circulated by a pump. The pump energy is the only auxiliary energy required by the system. The store is loaded in summer and discharged in winter. Such a system has been monitored for two years in Switzerland. The report describes a mathematical model developed to simulate these systems as well as its validation by means of the measured data. The model can be used by engineers to design and dimension these systems.

  12. Technology development and application of solar energy in desalination: MEDRC contribution

    KAUST Repository

    Ghaffour, Noreddine

    2011-12-01

    Desalination has become one of the sources for water supply in several countries especially in the Middle East and North Africa region. There is a great potential to develop solar desalination technologies especially in this region where solar source is abundantly available. The success in implementing solar technologies in desalination at a commercial scale depends on the improvements to convert solar energy into electrical and/or thermal energies economically as desalination processes need these types of energies. Since desalination is energy intensive, the wider use of solar technologies in desalination will eventually increase the demand on these technologies, making it possible to go for mass production of photovoltaic (PV) cells, collectors and solar thermal power plants. This would ultimately lead to the reduction in the costs of these technologies. The energy consumed by desalination processes has been significantly reduced in the last decade meaning that, if solar technologies are to be used, less PV modules and area for collectors would be needed. The main aspects to be addressed to make solar desalination a viable option in remote location applications is to develop new materials or improve existing solar collectors and find the best combinations to couple the different desalination processes with appropriate solar collector. In the objective to promote solar desalination in MENA, the Middle East Desalination Research Center has concentrated on various aspects of solar desalination in the last twelve years by sponsoring 17 research projects on different technologies and Software packages development for coupling desalination and renewable energy systems to address the limitations of solar desalination and develop new desalination technologies and hybrid systems suitable for remote areas. A brief description of some of these projects is highlighted in this paper. The full details of all these projects are available the Centers website. © 2011 Elsevier

  13. The project for a dig out installation of the geothermal water with the help of solar energy

    Directory of Open Access Journals (Sweden)

    I.M.Gordan

    2008-05-01

    Full Text Available This installation realives the water pumpingfrom a well or fountain, in a feight vesse, with acentrifugal pump trained by an continuous, alternateelectrical engine, depending on the users preferences,feed from a solar battery through a system ofstabilizers and respectively of inverter of electricaltension.

  14. Low cost solar array project production process and equipment task. A Module Experimental Process System Development Unit (MEPSDU)

    Science.gov (United States)

    1981-01-01

    Technical readiness for the production of photovoltaic modules using single crystal silicon dendritic web sheet material is demonstrated by: (1) selection, design and implementation of solar cell and photovoltaic module process sequence in a Module Experimental Process System Development Unit; (2) demonstration runs; (3) passing of acceptance and qualification tests; and (4) achievement of a cost effective module.

  15. MegaFlex Solar Array Scale-Up, up to 175kW per Wing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has near-term needs for solar electric propulsion (SEP) power sources from 5 to 30 kW and longer term goals for SEP tugs as large as 300 kW and beyond....

  16. Phase 2 of the array automated assembly task for the low-cost Silicon Solar Array Project. Third quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    Wihl, M.

    1978-07-01

    The results of the continuing work done on the feasibility of manufacturing photovoltaic solar modules in a future automated production facility are documented. During this quarter, the verification of metallization and junction formation were completed, and the verification of interconnection and encapsulation of cells into modules was started.

  17. The San Cristobal wind and solar projects : energy in action : displacing diesel-powered generation by renewable energy in the Galapagos Islands

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-01-01

    The e8 is a non-profit international organization, consisting of nine leading electricity companies from the G8 countries, which promotes sustainable energy development through electricity sector projects and human capacity building activities in developing nations worldwide. The e8 San Cristobal wind project, features the implementation of a 2.4 MW wind farm on the inhabited island of San Cristobal, in the Galapagos World Heritage Site. It is expected to displace diesel-powered electricity generation by wind energy, helping to reduce greenhouse gas emissions and the risk for equally devastating diesel-fuel tanker spills in this highly protected environment. This report discussed renewable electrification of the Galapagos Islands and described the San Cristobal wind project. This included a discussion of: management of the San Cristobal wind project; project engineering, development and implementation; sustainable development and an environmental impact assessment; as well as interviews with project managers. Human capacity building activities to enhance the promotion of renewable energy options in the Galapagos such as the micro-solar long-distance learning program were also identified. It was concluded that the complementary educational and training programs on renewable energy options and energy efficiency use, initiated along with the wind project have significantly contributed to the local community's increased awareness and knowledge of sustainable energy options and the importance of cost-conscious electricity use and energy-efficient consumption. Through these programs, the e8 has highlighted the importance of human capacity building and public education for the effective local acceptance, development and spread of renewable and clean energy technologies. tabs., figs.

  18. Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 2 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 2/3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    This report is a collection of 26 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are libraries, kindergartens, health and welfare centers, children's culture centers, general traffic centers, primary and middle schools, river water purifying facilities, credit banks, manufactories, retail shops at car parking areas, office buildings, hospitals, joint prefectural office buildings, municipal health centers, and prefectural general power generation control stations. (NEDO)

  19. Silicon Light: a European FP7 project aiming at high efficiency thin film silicon solar cells on foil. Monolithic series interconnection of flexible thin-film PV devices

    Energy Technology Data Exchange (ETDEWEB)

    Soppe, W. [ECN Solar Energy, P.O. Box 1, 1755 ZG Petten (Netherlands); Haug, F.J. [Ecole Polytechnique Federale de Lausanne EPFL, Photovoltaics and Thin Film Electronics Laboratory, Rue A.-L. Breguet 2, 2000 Neuchatel (Switzerland); Couty, P. [VHFTechnologies SA, Rue Edouard-Verdan 2, CH-1400 Yverdon-les-Bains (Switzerland); Duchamp, M. [Technical University of Denmark, Center for Electron Nanoscopy, DK-2800 Kongens Lyngby (Denmark); Schipper, W. [Nanoptics GmbH, Innungstr.5, 21244 Buchholz (Germany); Krc, J. [University of Ljubljana, Faculty of Electrical Engineering, Trzaska 25, SI-1000 Ljubljana (Slovenia); Sanchez, G. [Universidad Politecnica de Valencia, I.U.I. Centro de Tecnologia Nanofotonica, 46022 Valencia (Spain); Leitner, K. [Umicore Thin Film Products AG, Balzers (Liechtenstein); Wang, Q. [Shanghai Jiaotong University, Research Institute of Micro/Nanometer Science and Technology, 800 Dongchuan Road, Min Hang, 200240 Shanghai (China)

    2011-09-15

    Silicon-Light is a European FP7 project, which started January 1st, 2010 and aims at development of low cost, high-efficiency thin film silicon solar cells on foil. Three main routes are explored to achieve these goals: (a) advanced light trapping by implementing nanotexturization through UV Nano Imprinting Lithography (UV-NIL); (b) growth of crack-free silicon absorber layers on highly textured substrates; (c) development of new TCOs which should combine the best properties of presently available materials like ITO and AZO. The paper presents the midterm status of the project results, showing model calculations of ideal nanotextures for light trapping in thin film silicon solar cells; the fabrication of masters and the replication and roll-to-roll fabrication of these nanotextures. Further, results on ITO variants with improved work function are presented. Finally, the status of cell fabrication on foils with nanotexture is shown. Microcrystalline and amorphous silicon single junction cells with stable efficiencies with more than 8% have been made, paving the way towards a-Si/{mu}c-Si tandem cells with more than 11% efficiency.

  20. Feasibility study. Solar energy in Norway; Mulighetsstudie. Solenergi i Norge

    Energy Technology Data Exchange (ETDEWEB)

    Halvorsen, Una; Bernhard, Peter; Salvesen, Fritjof; Bugge, Lars; Andresen, Inger; Simonsen, Ingeborg

    2011-07-01

    On behalf of Enova KanEnergi and SINTEF summarized the results of the project 'Feasibility study. Solar energy' in a report. The purpose of this report is to outline an overview of the potential for solar energy in Norway to be realized until 2020. This is a survey of the status of technology and associated costs related to energy production, as well as a description of the market conditions. This report is a contribution to Enova's ongoing strategy and development. (eb)

  1. Long Island Solar Farm

    Energy Technology Data Exchange (ETDEWEB)

    Anders, R.

    2013-05-01

    The Long Island Solar Farm (LISF) is a remarkable success story, whereby very different interest groups found a way to capitalize on unusual circumstances to develop a mutually beneficial source of renewable energy. The uniqueness of the circumstances that were necessary to develop the Long Island Solar Farm make it very difficult to replicate. The project is, however, an unparalleled resource for solar energy research, which will greatly inform large-scale PV solar development in the East. Lastly, the LISF is a superb model for the process by which the project developed and the innovation and leadership shown by the different players.

  2. United States special format report: report of the Phoenix Corporation, city of Colorado Springs Solar Heating Project

    Energy Technology Data Exchange (ETDEWEB)

    Jardine, D.M.

    1976-06-01

    The development of a solar assisted heat pump system and its operating characteristics is covered. The thermal energy storage subsystem is of prime importance to the operation of the system. The performance of the underground uninsulated steel tank containing water and using the ground as an additional thermal energy storage medium to act as a heat source and heat sink for the system is reported. The type and performance of the heat pump used is covered. The use of commercially available heat transfer fluid in the collector and heat pump evaporator thermal energy transfer system to eliminate corrosion, electrolysis, boiling, and freezing within the system is presented. The System Economic Analysis covers the cost of backup and system operating energy as a large economic factor that must be recognized. The Solar Assisted Heat Pump System is more attractive than other systems from an economic and operational point of view. (WDM)

  3. Solar Energy-An Everyday Occurrence

    Science.gov (United States)

    Keister, Carole; Cornell, Lu Beth

    1978-01-01

    Describes a solar energy research project sponsored by the Energy Research and Development Administration and conducted at Timonium School in Maryland. Elementary student involvement in solar energy studies resulting from the project is noted. (MDR)

  4. Rectenna solar cells

    CERN Document Server

    Moddel, Garret

    2013-01-01

    Rectenna Solar Cells discusses antenna-coupled diode solar cells, an emerging technology that has the potential to provide ultra-high efficiency, low-cost solar energy conversion. This book will provide an overview of solar rectennas, and provide thorough descriptions of the two main components: the diode, and the optical antenna. The editors discuss the science, design, modeling, and manufacturing of the antennas coupled with the diodes. The book will provide concepts to understanding the challenges, fabrication technologies, and materials required to develop rectenna structures. Written by e

  5. Connectable solar air collectors

    Energy Technology Data Exchange (ETDEWEB)

    Oestergaard Jensen, S.; Bosanac, M.

    2002-02-01

    The project has proved that it is possible to manufacture solar air collector panels, which in an easy way can be connected into large collector arrays with integrated ducting without loss of efficiency. The developed connectable solar air collectors are based on the use of matrix absorbers in the form of perforated metal sheets. Three interconnected solar air collectors of the above type - each with an transparent area of approx. 3 m{sup 2} - was tested and compared with parallel tests on two single solar air collectors also with a transparent area of approx. 3 m{sup 2} One of the single solar air collectors has an identical absorber as the connectable solar air collectors while the absorber of the other single solar air collector was a fibre cloth. The efficiency of the three solar air collectors proved to be almost identical in the investigated range of mass flow rates and temperature differences. The solar air collectors further proved to be very efficient - as efficient as the second most efficient solar air collectors tested in the IEA task 19 project Solar Air Systems. Some problems remain although to be solved: the pressure drop across especially the connectable solar air collectors is too high - mainly across the inlets of the solar air collectors. It should, however, be possible to considerably reduce the pressure losses with a more aerodynamic design of the inlet and outlet of the solar air collectors; The connectable solar air collectors are easy connectable but the air tightness of the connections in the present form is not good enough. As leakage leads to lower efficiencies focus should be put on making the connections more air tight without loosing the easiness in connecting the solar air collectors. As a spin off of the project a simple and easy way to determine the efficiency of solar, air collectors for pre-heating of fresh air has been validated. The simple method of determining the efficiency has with success been compared with an advance method

  6. Uses Of Innovative Project Management Tools In The Establishment Of E-Centers Solar PV System Installation Project Without Electricity In Bangladesh A Case Study On Ingen Technology Limited.

    Directory of Open Access Journals (Sweden)

    Md. Mohiuddin

    2017-02-01

    Full Text Available Todays world is shaped by availability of Information and Communication Technology ICT. Government of Bangladesh declared a vision of Digital Bangladesh by 2021 to ensure services at peoples doorsteps. A total number of 4501 UISCs Union Information and Service Centers have been established at all Union Parishads of Bangladesh. UISCs are the e-Service delivery outlets which initiated a new era in information and service delivery for rural and marginalized people. With the aim to ensure services at citizens doorsteps UISCs are offering various government services like public examination results online university admission birth-death registration agricultural amp law consultancy telemedicine life insurance private services like mobile banking English learning computer training email internet browsing and so on. Now-a-days UISC is a local knowledge Centre. But there is no electricity in each Union Parishad of Bangladesh. in that case for establishment of e-Centre in Seven Divisions of Bangladesh at Unions without Electricity project needed to provide electricity in everywhere. Without Electricity we cant imagine it. Thats why Bangladesh Government decided to install the Solar PV system in different unions of Bangladesh division wise. This research aims to focus on the implementation of project management concepts in Establishment of e-Centre in Seven Divisions of Bangladesh at Unions without Electricity under Bangladesh Computer Council BCC. Around 1000 unions e-Centre has been brought under solar power which is total 1800 KW for Rural infrastructure development under digital Bangladesh program. The purpose of the study is to identify and explore the processes of the InGen Technology Limited to show how the company accomplishes a Successful Project by formulating it through project management tools. The study investigates measures and evaluates the total processes or activities of InGen Technology Limited in accomplishing and delivering successful

  7. Project Tasks in Robotics

    DEFF Research Database (Denmark)

    Sørensen, Torben; Hansen, Poul Erik

    1998-01-01

    Description of the compulsary project tasks to be carried out as a part of DTU course 72238 Robotics......Description of the compulsary project tasks to be carried out as a part of DTU course 72238 Robotics...

  8. [Descriptive statistics].

    Science.gov (United States)

    Rendón-Macías, Mario Enrique; Villasís-Keever, Miguel Ángel; Miranda-Novales, María Guadalupe

    2016-01-01

    Descriptive statistics is the branch of statistics that gives recommendations on how to summarize clearly and simply research data in tables, figures, charts, or graphs. Before performing a descriptive analysis it is paramount to summarize its goal or goals, and to identify the measurement scales of the different variables recorded in the study. Tables or charts aim to provide timely information on the results of an investigation. The graphs show trends and can be histograms, pie charts, "box and whiskers" plots, line graphs, or scatter plots. Images serve as examples to reinforce concepts or facts. The choice of a chart, graph, or image must be based on the study objectives. Usually it is not recommended to use more than seven in an article, also depending on its length.

  9. Promoting the Utilization of Science in Healthcare (PUSH) Project: A Description of the Perceived Barriers and Facilitators to Research Utilization Among Pediatric Nurses.

    Science.gov (United States)

    Cline, Genieveve J; Burger, Kristina J; Amankwah, Ernest K; Goldenberg, Neil A; Ghazarian, Sharon R

    The purpose of this descriptive study was to identify the perceived barriers and facilitators to research utilization and evidence-based practice among nurses employed in a tertiary care children's hospital. Results revealed seven facilitator and six barrier themes that contribute to the understanding of the problem. The themes can be utilized by nursing professional development specialists to customize organizational infrastructure and educational programs.

  10. A miniature high voltage plasma interaction flight experiment - Project MINX. [for measuring solar cell array parasitic current drain

    Science.gov (United States)

    Riley, T. J.; Triner, J. E.; Sater, B. L.; Cohen, D.; Somberg, H.

    1974-01-01

    A miniature high-voltage array was fabricated, incorporating the multi-junction edge illuminated (MJC) cell technique. The array consists of 32 2x2.2 cm MJCs, series connected, capable of 1600 V open circuit at 1 AMO and 1.2 mA short circuit. A solid state, high-voltage relay is connected across each 4-cell subgroup of the array. It was built to test plasma current drain on space systems using high voltage as might occur when a high-voltage solar array is operated from low to synchronous orbit.

  11. Solar cycle dependence of scaling in solar wind fluctuations

    Directory of Open Access Journals (Sweden)

    S. C. Chapman

    2008-06-01

    Full Text Available In this review we collate recent results for the statistical scaling properties of fluctuations in the solar wind with a view to synthesizing two descriptions: that of evolving MHD turbulence and that of a scaling signature of coronal origin that passively propagates with the solar wind. The scenario that emerges is that of coexistent signatures which map onto the well known "two component" picture of solar wind magnetic fluctuations. This highlights the need to consider quantities which track Alfvénic fluctuations, and energy and momentum flux densities to obtain a complete description of solar wind fluctuations.

  12. Solar cycle dependence of scaling in solar wind fluctuations

    Science.gov (United States)

    Chapman, S. C.; Hnat, B.; Kiyani, K.

    2008-06-01

    In this review we collate recent results for the statistical scaling properties of fluctuations in the solar wind with a view to synthesizing two descriptions: that of evolving MHD turbulence and that of a scaling signature of coronal origin that passively propagates with the solar wind. The scenario that emerges is that of coexistent signatures which map onto the well known "two component" picture of solar wind magnetic fluctuations. This highlights the need to consider quantities which track Alfvénic fluctuations, and energy and momentum flux densities to obtain a complete description of solar wind fluctuations.

  13. Proceedings of the Flat-Plate Solar Array Project Research Forum on the Design of Flat-Plate Photovoltaic Arrays for Central Stations

    Science.gov (United States)

    1983-01-01

    The Flat Plate Solar Array Project, focuses on advancing technologies relevant to the design and construction of megawatt level central station systems. Photovoltaic modules and arrays for flat plate central station or other large scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost effective configurations. Design, qualification and maintenance issues related to central station arrays derived from the engineering and operating experiences of early applications and parallel laboratory reserch activities are investigated. Technical issues are examined from the viewpoint of the utility engineer, architect/engineer and laboratory researcher. Topics on optimum source circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements, and array operation and maintenance are discussed.

  14. Solar Indices - Solar Ultraviolet

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  15. Solar Indices - Solar Flares

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  16. Solar Indices - Solar Corona

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  17. Solar Indices - Solar Irradiance

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  18. Astroparticle physics with solar neutrinos

    Science.gov (United States)

    NAKAHATA, Masayuki

    2011-01-01

    Solar neutrino experiments observed fluxes smaller than the expectations from the standard solar model. This discrepancy is known as the “solar neutrino problem”. Flux measurements by Super-Kamiokande and SNO have demonstrated that the solar neutrino problem is due to neutrino oscillations. Combining the results of all solar neutrino experiments, parameters for solar neutrino oscillations are obtained. Correcting for the effect of neutrino oscillations, the observed neutrino fluxes are consistent with the prediction from the standard solar model. In this article, results of solar neutrino experiments are reviewed with detailed descriptions of what Kamiokande and Super-Kamiokande have contributed to the history of astroparticle physics with solar neutrino measurements. PMID:21558758

  19. Astroparticle physics with solar neutrinos.

    Science.gov (United States)

    Nakahata, Masayuki

    2011-01-01

    Solar neutrino experiments observed fluxes smaller than the expectations from the standard solar model. This discrepancy is known as the "solar neutrino problem". Flux measurements by Super-Kamiokande and SNO have demonstrated that the solar neutrino problem is due to neutrino oscillations. Combining the results of all solar neutrino experiments, parameters for solar neutrino oscillations are obtained. Correcting for the effect of neutrino oscillations, the observed neutrino fluxes are consistent with the prediction from the standard solar model. In this article, results of solar neutrino experiments are reviewed with detailed descriptions of what Kamiokande and Super-Kamiokande have contributed to the history of astroparticle physics with solar neutrino measurements. (Communicated by Toshimitsu Yamazaki, M.J.A.).

  20. Solar Asset Management Software

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, Aaron [Ra Power Management, Inc., Oakland, CA (United States); Zviagin, George [Ra Power Management, Inc., Oakland, CA (United States)

    2016-09-30

    Ra Power Management (RPM) has developed a cloud based software platform that manages the financial and operational functions of third party financed solar projects throughout their lifecycle. RPM’s software streamlines and automates the sales, financing, and management of a portfolio of solar assets. The software helps solar developers automate the most difficult aspects of asset management, leading to increased transparency, efficiency, and reduction in human error. More importantly, our platform will help developers save money by improving their operating margins.

  1. Solar thermal power systems. Annual technical progress report, FY 1979

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Gerald W.

    1980-06-01

    The Solar Thermal Power Systems Program is the key element in the national effort to establish solar thermal conversion technologies within the major sectors of the national energy market. It provides for the development of concentrating mirror/lens heat collection and conversion technologies for both central and dispersed receiver applications to produce electricity, provide heat at its point of use in industrial processes, provide heat and electricity in combination for industrial, commercial, and residential needs, and ultimately, drive processes for production of liquid and gaseous fuels. This report is the second Annual Technical Progress Report for the Solar Thermal Power Systems Program and is structured according to the organization of the Solar Thermal Power Systems Program on September 30, 1979. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the Solar Thermal Power Systems Program, a brief history, the significant achievements and real progress during FY 1979, also future project activities as well as anticipated significant achievements are forecast. (WHK)

  2. Teaching and Learning in Two iPad-Infused Classrooms: A Descriptive Case Study of A Dual Classroom, School-Based Pilot Project

    Science.gov (United States)

    Maich, Kimberly; Hall, Carmen L.; van Rhijn, Tricia Marie; Henning, Megan

    2017-01-01

    This multi-methods, descriptive case study examines attitudes and practices of classroom-based iPad use. The site is one inner-city, urban, publicly funded school, focused on two iPad-infused classrooms (Grade 2/3 and Grade 4/5). Data were collected from 5 educators and 35 students to investigate two research questions: How are iPads being…

  3. Solar-assisted biomass-district heating: projects in Austria and operational data; Solarunterstuetzte Biomasse-Fernwaermeversorgung: Projekte in Oesterreich und Betriebsdaten

    Energy Technology Data Exchange (ETDEWEB)

    Faninger, G. [Institut fuer Interdisziplinaere Forschung und Fortbildung der Universitaeten Klagenfurt, Innsbruck und Wien (IFF), Klagenfurt (Austria)

    1998-12-31

    In recent years small-volume biomass district heating systems (district heat grids) have attracted increasing interest in Austria. By the end of 1997 some 359 biomass-district heating systems with an overall capacity of approximately 483 MW were in operation. If a biomass-district heating plant and a solar plant are combined the solar plant can supply most of the heat required outside the heating season. At present Austria runs 12 solar-assisted biomass-district heating grids with collector areas between 225 square metres and 1,250 square metres. In order to run these biomass-district heating systems in an economically and technically efficient way it is necessary to assure high quality in terms of planning, construction and operation. A list of criteria is set up on the basis of first operational data in order to evaluate energy efficiency and economic performance. These criteria should be applied in order to ensure that energy, environment and economy are equally considered in the planning and construction of solar-assisted biomass-district heating plants. They should also be helpful for the approval procedures of projects. (orig.) [Deutsch] Kleinraeumige Biomasse-Fernwaermeanlagen (Nahwaermenetze) fanden in den letzten Jahren zunehmendes Interesse in Oesterreich. So waren Ende 1997 insgesamt 359 Biomasse-Fernwaermeanlagen mit einer installierten Gesamtleistung von etwa 483 MW in Betrieb. Die Kombination einer Biomasse-Fernwaermeanlage mit einer Solaranlage bringt den Vorteil, dass die Waermebereitstellung ausserhalb der Heizsaison zu einem hohen Anteil ueber die Solaranlage vorgenommen werden kann. Derzeit werden in Oesterreich 12 solarunterstuetzte Biomasse-Nahwaermenetze mit Kollektorflaechen von 225 m{sup 2} bis 1.250 m{sup 2} betrieben. Um einen moeglichst effizienten und damit auch wirtschaftlichen Betrieb von solarunterstuetzten Biomasse-Fernwaermeanlagen zu gewaehrleisten, werden hohe Anforderungen an Planung, Ausfuehrung und Betrieb gestellt. Auf der

  4. Quality assurance of a solar housing project on the basis of an information and consulting campaign. Final report; Qualitaetssicherung mit Informations- und Beratungskampagne bei der Realisierung einer Solarsiedlung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Otto, J.; Nasarek, P.; Toelle, L.

    2002-07-01

    A solar housing project of 68 single family dwellings is constructed on the southern slope of a hill in the town of Emmerthal. High thermal insulation, active and passive solar energy use, and a two-stage heat pump process will reduce carbon dioxide emissions by 50 percent as compared to the current standard. All buildings are designed to consume 30 percent less than the heating energy consumption required by the WSVO '95. 60 percent of the hot water will consumed will be heated by solar energy. Consulting and information of the builder-owners as well as quality assurance measures during construction will serve to ensure that these goals are met and will also provide a documentation of the energy balance of the housing project.

  5. Future market solar cooling. Case study on behalf of the Federal Office for Environment Protection in the context of the research project Innovative Environmental Policy in important fields of action; Zukunftsmarkt Solares Kuehlen. Fallstudie im Auftrag des Umweltbundesamtes im Rahmen des Forschungsprojektes Innovative Umweltpolitik in wichtigen Handlungsfeldern

    Energy Technology Data Exchange (ETDEWEB)

    Clausen, Jens [Borderstep Inst. fuer Innovation und Nachhaltigkeit gGmbH, Berlin (Germany)

    2007-12-15

    the field of solar cooling are German and Austrian firms and many research facilities are distributed in mid and south Europe. The big area of installed solar collectors in Germany and Austria is facilitating applications in these countries. And the regulation demanding mandatory installation of solar collectors in Spain on new buildings is fostering the regional development. Political strategies may target: - the funding of additional pilot projects and small serial applications to support readiness for production of products and application technology, - the information and qualification of those sectors necessary for large scale application, like air condition specialists and architects, - Information and motivation of pilot users. Solar Cooling should also be observed in the design of regulations concerning sustainable building and heating. (orig.)

  6. Cases Description

    DEFF Research Database (Denmark)

    Hansen, Jesper Rohr; Savini, Federico; Wallin, Sirkku

    2013-01-01

    The JPI Urban Europe research project ‘APRILab’ focuses on planning dilemmas for the transformation of city areas in the urban fringe. In this Working Document we describe the case studies selected by the involved partners: - Aalto University, Finland: T3 in Espoo City - Aalborg University, Denmark...

  7. Residential photovoltaic module and array requirement study. Low-Cost Solar Array Project engineering area. Final report appendices

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    This volume contains the appendices to a study to identify design requirements for photovoltaic modules and arrays used in residential applications. Appendices include: (1) codes, standards, and manuals of accepted practice-definition and importance; (2) regional code variations-impact; (3) model and city codes-review; (4) National Electric Code (NEC)-review; (5) types of standards-definition and importance; (6) federal standards-review; (7) standards review method; (8) manuals of accepted practice; (9) codes and referenced standards-summary; (10) public safety testing laboratories; (11) insurance review; (12) studies approach; (13) mounting configurations; (14) module/panel size and shape cost analysis; (15) grounding, wiring, terminal and voltage studies; (16) array installation cost summary; (17) photovoltaic shingle/module comparison; (18) retrofit application; (19) residential photovoltaic module performance criteria; (20) critique of JPL's solar cell module design and test specifications for residential applications; and (21) CSI format specification. (WHK)

  8. Solar satellites

    Energy Technology Data Exchange (ETDEWEB)

    Poher, C.

    1982-01-01

    A reference system design, projected costs, and the functional concepts of a satellite solar power system (SSPS) for converting sunlight falling on solar panels of a satellite in GEO to a multi-GW beam which could be received by a rectenna on earth are outlined. Electricity transmission by microwaves has been demonstrated, and a reference design system for supplying 5 GW dc to earth was devised. The system will use either monocrystalline Si or concentrator GaAs solar cells for energy collection in GEO. Development is still needed to improve the lifespan of the cells. Currently, the cell performance degrades 50 percent in efficiency after 7-8 yr in space. Each SSPS satellite would weigh either 34,000 tons (Si) or 51,000 tons (GaAs), thereby requiring the fabrication of a heavy lift launch vehicle or a single-stage-to-orbit transport in order to minimize launch costs. Costs for the solar panels have been estimated at $500/kW using the GaAs technology, with transport costs for materials to GEO being $40/kg.

  9. Solar Neutrinos

    Directory of Open Access Journals (Sweden)

    V. Antonelli

    2013-01-01

    relevant indications on the fundamental interactions among particles. After reviewing the striking results of the last two decades, which were determinant to solve the long standing solar neutrino puzzle and refine the Standard Solar Model, we focus our attention on the more recent results in this field and on the experiments presently running or planned for the near future. The main focus at the moment is to improve the knowledge of the mass and mixing pattern and especially to study in detail the lowest energy part of the spectrum, which represents most of the solar neutrino spectrum but is still a partially unexplored realm. We discuss this research project and the way in which present and future experiments could contribute to make the theoretical framework more complete and stable, understanding the origin of some “anomalies” that seem to emerge from the data and contributing to answer some present questions, like the exact mechanism of the vacuum to matter transition and the solution of the so-called solar metallicity problem.

  10. Performance evaluation of the solar kinetics T-700 line concentrating solar collector

    Science.gov (United States)

    1981-01-01

    A performance evaluation of the solar kinetics T-700 line concentrating solar collector is reported. Collector descriptions, summary, test conditions, test equipment, test requirements and procedures, and an analysis of the various tests performed are described.

  11. Procuring Solar Energy: A Guide for Federal Facility Decision Makers, September 2010

    Energy Technology Data Exchange (ETDEWEB)

    Stoltenberg, B.; Partyka, E.

    2010-09-01

    This guide presents an overview of the process for successfully planning for and installing solar technology on a federal site. It is specifically targeted to managers of federal buildings and sites, contracting officers, energy and sustainability officers, and regional procurement managers. The solar project process is outlined in a concise, easy-to-understand, step-by-step format. Information includes a brief overview of legislation and executive orders related to renewable energy and the compelling reasons for implementing a solar project on a federal site. It also includes how to assess a facility to identify the best solar installation site, project recommendations and considerations to help avoid unforeseen issues, and guidance on financing and contracting options. Case studies with descriptions of successful solar deployments across multiple agencies are presented. In addition, detailed information and sample documents for specific tasks are referenced with Web links or included in the appendixes. The guide concentrates on distributed solar generation and not large, centralized solar energy generation.

  12. Development of smart solar tanks

    DEFF Research Database (Denmark)

    Furbo, Simon; Andersen, Elsa

    1999-01-01

    The aim of the project is to develop smart solar tanks. A smart solar tank is a tank in which the domestic water can bee heated both by solar collectors and by an auxiliary energy supply system. The auxiliary energy supply system heats up the hot-water tank from the top and the water volume heated...

  13. Solar Walls in tsbi3

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne

    tsbi3 is a user-friendly and flexible computer program, which provides support to the design team in the analysis of the indoor climate and the energy performance of buildings. The solar wall module gives tsbi3 the capability of simulating solar walls and their interaction with the building....... This version, C, of tsbi3 is capable of simulating five types of solar walls say: mass-walls, Trombe-walls, double Trombe-walls, internally ventilated walls and solar walls for preheating ventilation air. The user's guide gives a description of the capabilities and how to simulate solar walls in tsbi3....

  14. Solar Tracking System

    OpenAIRE

    Nguyen, Nam

    2016-01-01

    The goal of this thesis was to develop a laboratory prototype of a solar tracking system, which is able to enhance the performance of the photovoltaic modules in a solar energy system. The operating principle of the device is to keep the photovoltaic modules constantly aligned with the sunbeams, which maximises the exposure of solar panel to the Sun’s radiation. As a result, more output power can be produced by the solar panel. The work of the project included hardware design and implemen...

  15. Silicon-on-ceramic solar cell development. Solar cell development for the cell development task of the Low-Cost Solar Array Project. Quarterly report No. 1, February 15--June 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, P W; Grung, B L; Zook, J D

    1978-07-30

    The objective of this program is to investigate unique cell processing/design approaches to the successful fabrication of high-performance solar cells on silicon-on-ceramic (SOC) material. The work in the cell development area consists of two broad categories of activities: (1) the development of standard cell processing techniques, and (2) the investigation of novel device design approaches. The first area of activity has to do with the development of processing techniques for use with silicon dipped on ''slotted'' ceramic substrates. This embodiment allows us to make contact to the back surface of the silicon, thereby minimizing the front surface contact area. The second activity area is initially concerned with producing a ''stripe'' geometry cell on an unslotted ceramic substrate. The idea here is to expose the base layer for electrical contact on the top surface of the substrate and make up for the lost cell area by using an optical collector. Progress is reported.

  16. Optimal Conventional and Semi-Natural Treatments for the Upper Yakima Spring Chinook Salmon Supplementation Project; Treatment Definitions and Descriptions and Biological Specifications for Facility Design, 1995-1999 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hager, Robert C. (Hatchery Operations Consulting); Costello, Ronald J. (Mobrand Biometrics, Inc., Vashon Island, WA)

    1999-10-01

    This report describes the Yakima Fisheries Project facilities (Cle Elum Hatchery and acclimation satellites) which provide the mechanism to conduct state-of-the-art research for addressing questions about spring chinook supplementation strategies. The definition, descriptions, and specifications for the Yakima spring chinook supplementation program permit evaluation of alternative fish culture techniques that should yield improved methods and procedures to produce wild-like fish with higher survival that can be used to rebuild depleted spring chinook stocks of the Columbia River Basin. The definition and description of three experimental treatments, Optimal Conventional (OCT), Semi-Natural (SNT), Limited Semi-Natural (LSNT), and the biological specifications for facilities have been completed for the upper Yakima spring chinook salmon stock of the Yakima Fisheries Project. The task was performed by the Biological Specifications Work Group (BSWG) represented by Yakama Indian Nation, Washington Department of Fish and Wildlife, National Marine Fisheries Service, and Bonneville Power Administration. The control and experimental variables of the experimental treatments (OCT, SNT, and LSNT) are described in sufficient detail to assure that the fish culture facilities will be designed and operated as a production scale laboratory to produce and test supplemented upper Yakima spring chinook salmon. Product specifications of the treatment groups are proposed to serve as the generic templates for developing greater specificity for measurements of product attributes. These product specifications will be used to monitor and evaluate treatment effects, with respect to the biological response variables (post release survival, long-term fitness, reproductive success and ecological interactions).

  17. Solar building

    OpenAIRE

    Zhang, Luxin

    2014-01-01

    In my thesis I describe the utilization of solar energy and solar energy with building integration. In introduction it is also mentioned how the solar building works, trying to make more people understand and accept the solar building. The thesis introduces different types of solar heat collectors. I compared the difference two operation modes of solar water heating system and created examples of solar water system selection. I also introduced other solar building applications. It is conv...

  18. Hybrid Nanocomposite Photovoltaics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop an innovative solar cell design that combines nanotechnology with conducting polymer...

  19. Description of the global petroleum supply and demand outlook updated for the 1993 edition of the GRI baseline projection of US energy supply and demand, December 1992

    Energy Technology Data Exchange (ETDEWEB)

    Dreyfus, D.A.; Koklauner, A.B.

    1992-12-01

    Strategic planning of the research and development program carried out by Gas Research Institute (GRI) is supported by an annual GRI baseline projection of U.S. energy supply and demand. Because petroleum products compete in a wide variety of energy uses, oil prices serve as a market clearing force for the entire energy system. A significant portion of the U.S. petroleum supply is imported, and the price of crude oil to U.S. refiners is determined by the international oil trade. Any projection of the U.S. energy situation, therefore, requires the evaluation of the global oil market and the impact of oil price changes on the supply/demand balances of market participants. The 1992 edition of the projection completed in August 1991 assumed that in the aftermath of the war in the Middle East the fundamentals of oil trade would reassert their influence. This did indeed occur and with astonishing speed. In the face of this outlook, GRI has revised its 1993 oil price track downward.

  20. Purdue Solar Energy Utilization Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Rakesh [Purdue

    2014-01-21

    The objective of this project is to establish and set-up a laboratory that will facilitate research and development of new low-cost and high-efficiency solar energy utilization technologies at Purdue University. The outcome will help spur the creation of solar energy start-up companies and eventually a solar energy industry in Indiana that can help fulfill the growing national demand for solar energy.

  1. Large-scale solar heat

    Energy Technology Data Exchange (ETDEWEB)

    Tolonen, J.; Konttinen, P.; Lund, P. [Helsinki Univ. of Technology, Otaniemi (Finland). Dept. of Engineering Physics and Mathematics

    1998-12-31

    In this project a large domestic solar heating system was built and a solar district heating system was modelled and simulated. Objectives were to improve the performance and reduce costs of a large-scale solar heating system. As a result of the project the benefit/cost ratio can be increased by 40 % through dimensioning and optimising the system at the designing stage. (orig.)

  2. Solar energy, its conversion and utilization

    Science.gov (United States)

    Farber, E. A.

    1972-01-01

    The work being carried out at the University of Florida Solar Energy and Energy Conversion Laboratory in converting solar energy, our only income, into other needed and useful forms of energy is described. A treatment such as this demonstrates, in proper perspective, how solar energy can benefit mankind with its many problems of shortages and pollution. Descriptions were given of the conversion processes, equipment, and performance. The testing of materials, solar water heating, space heating, cooking and baking, solar distillation, refrigeration and air-conditioning, work with the solar furnace, conversion to mechanical power, hot air engines, solar-heated sewage digestion, conversion to electricity, and other devices will be discussed.

  3. [What are we doing in neighborhoods? Description of health-promoting community activities in primary care: the FrAC Project].

    Science.gov (United States)

    March, Sebastià; Jordán Martín, Matilde; Montaner Gomis, Isabel; Benedé Azagra, Carmen Belén; Elizalde Soto, Lázaro; Ramos, María

    2014-01-01

    To describe the health-promoting community activities developed in primary health care and compare types of activities and how they are performed among autonomous regions. A descriptive multicenter study was carried out in primary care in 5 Spanish regions. We included community activities consisting of non-sporadic activities, carried out in the previous year, with the participation of the primary care team, and the active participation of the community or as a cross-sector activity. The persons responsible for each of the 194 teams were asked if the team participated in community activities and, if so, a questionnaire was completed by the person responsible for each activity. The variables consisted of the topic addressed, the target population, the professionals involved, the time and scope of implementation, evaluation, theoretical perspectives, network registration, the involvement of the community and other agents, and evaluation of this involvement. A descriptive analysis was performed, stratified by region. We identified 183 community activities in 104 teams. Although there was wide variability among regions, most activities were related to general health, nutrition and emotional-sexual health and targeted the general population, children or parents and were carried out in educational or health centers. Participating professionals had a median of 4 years of experience and a median of 2.8 professionals were involved in each activity. A total of 72.5% of the activities were performed during working hours, 75% were evaluated, and 70% were supported by theoretical and methodological perspectives. Non-health sectors were involved in 65%, local government in 60%, and nongovernmental organizations in 58.5%. Nurses were involved in 85.8% of the activities, physicians in 38.5%, and social workers in 35%. Substantial variability was detected among regions. Wide variability was found in the types of activities and their application among the community activities

  4. Task Description Language

    Science.gov (United States)

    Simmons, Reid; Apfelbaum, David

    2005-01-01

    Task Description Language (TDL) is an extension of the C++ programming language that enables programmers to quickly and easily write complex, concurrent computer programs for controlling real-time autonomous systems, including robots and spacecraft. TDL is based on earlier work (circa 1984 through 1989) on the Task Control Architecture (TCA). TDL provides syntactic support for hierarchical task-level control functions, including task decomposition, synchronization, execution monitoring, and exception handling. A Java-language-based compiler transforms TDL programs into pure C++ code that includes calls to a platform-independent task-control-management (TCM) library. TDL has been used to control and coordinate multiple heterogeneous robots in projects sponsored by NASA and the Defense Advanced Research Projects Agency (DARPA). It has also been used in Brazil to control an autonomous airship and in Canada to control a robotic manipulator.

  5. [Incidence and Costs of 1:1 Care in Psychiatric Hospitals in Germany - A Descriptive Analysis Based on the VIPP Project Data Set].

    Science.gov (United States)

    Nienaber, André; Schulz, Michael; Noelle, Rüdiger; Wiegand, Hauke Felix; Wolff-Menzler, Claus; Häfner, Sibylle; Seemüller, Florian; Godemann, Frank; Löhr, Michael

    2016-05-01

    1:1 care is applied for patients requiring close psychiatric monitoring and care like patients with acute suicidality. The article describes the frequency of 1:1 care across different diagnoses and age groups in German psychiatric hospitals. The analysis was based on the VIPP Project from the years 2011 and 2012. A total of 47 hospitals with more than 120,000 cases were included. Object of the analysis was the OPS code 9-640.0 1:1 care. The evaluation was performed on case level. Data of 47 hospitals were included. Of the 121,454 cases evaluated in 2011 3.8 % documented a 1:1 care within the meaning of OPS 9-640.0 additional code. Of the 66 245 male cases a 1:1 care was documented in 3.5 % and the 55 207 female cases was 4.1 %. Compared to 2011, the proportion of 1:1 care in 2012 rose to 4.8 %. The results show that 1:1 care is frequently applied in German psychiatric hospitals. The Data of the VIPP project have proven to be a useful tool to gain information on the frequency of cost-intensive interventions in German psychiatric hospitals. Further analyses should create the possibility of evaluation at the level of the individual codes. © Georg Thieme Verlag KG Stuttgart · New York.

  6. Utilization of solar energy in South Africa

    CSIR Research Space (South Africa)

    Whillier, A

    1953-04-01

    Full Text Available -plate solar energy collectors. A brief description of solar collectors and discussion of some of the fundamental aspects of solar energy utilization are included. An example is given to show the design curves may be used to determine the surface area of a...

  7. Calibration of solar radiation measuring instruments. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bahm, R J; Nakos, J C

    1979-11-01

    A review of solar radiation measurement of instruments and some types of errors is given; and procedures for calibrating solar radiation measuring instruments are detailed. An appendix contains a description of various agencies who perform calibration of solar instruments and a description of the methods they used at the time this report was prepared. (WHK)

  8. Fundamentals of solar energy conversion

    Science.gov (United States)

    Anderson, E. E.

    This textbook strives to strengthen a student's knowledge of the basic sciences as well as to provide a practical background in solar energy conversion. Particular consideration is given to solar geometry, the availability of solar energy, solar concentrators, elements of fluid mechanics and heat transfer in solar systems, flat-plate collectors, and thermal storage of solar energy. The use of solar energy for specific types of loads is then discussed. The application of active solar systems to space and hot-water heating is considered, and a description is given of the empirical f-chart method for thermal-performance analysis. The economics of solar systems is examined along with the application of solar energy to cooling and dehumidification loads as well as the application of solar energy to industrial and other thermal loads. The concept of passive systems is explained, and the evaluation of thermal performance on the basis of the empirical load/collector ratio method is described. Appendixes are presented with such information as solar-position charts, tables of solar radiation and climatic data, and programs for hand-held calculators.

  9. Low Cost Solar Array Project. Feasibility of the silane process for producing semiconductor-grade silicon. Final report, October 1975-March 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    The commercial production of low-cost semiconductor-grade silicon is an essential requirement of the JPL/DOE (Department of Energy) Low-Cost Solar Array (LSA) Project. A 1000-metric-ton-per-year commercial facility using the Union Carbide Silane Process will produce molten silicon for an estimated price of $7.56/kg (1975 dollars, private financing), meeting the DOE goal of less than $10/kg. Conclusions and technology status are reported for both contract phases, which had the following objectives: (1) establish the feasibility of Union Carbide's Silane Process for commercial application, and (2) develop an integrated process design for an Experimental Process System Development Unit (EPSDU) and a commercial facility, and estimate the corresponding commercial plant economic performance. To assemble the facility design, the following work was performed: (a) collection of Union Carbide's applicable background technology; (b) design, assembly, and operation of a small integrated silane-producing Process Development Unit (PDU); (c) analysis, testing, and comparison of two high-temperature methods for converting pure silane to silicon metal; and (d) determination of chemical reaction equilibria and kinetics, and vapor-liquid equilibria for chlorosilanes.

  10. Proceedings of the Flat-Plate Solar Array Project Research Forum on the design of flat-plate photovoltaic arrays for central stations

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    The Flat-Plate Solar Array Project, managed by the Jet Propulsion Laboratory for the US Department of Energy, has focused on advancing technologies relevant to the design and construction of megawatt-level central-station systems. Photovoltaic modules and arrays for flat-plate central-station or other large-scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost-effective configurations. The Central Station Research Forum addressed design, qualification and maintenance issues related to central-station arrays derived from the engineering and operating experiences of early applications and parallel laboratory research activities. Technical issues were examined from the viewpoint of the utility engineer, architect-engineer and laboratory researcher. The forum included presentations on optimum source-circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements and array operation and maintenance. The Research Forum focused on current capabilities as well as design difficulties requiring additional technological thrusts and/or continued research emphasis. Session topic summaries highlighting major points during group discussions, identifying promising technical approaches or areas of future research, are presented.

  11. Aghien lagoon: a sustainable resource of fresh water for the city of Abidjan (Ivory Coast)? Description of the project and preliminary results

    Science.gov (United States)

    Kamagaté, Bamory; Effebi, Rose K.; Goula Bi, Tié Albert; Lanciné Goné, Droh; Noufé, Djibril; Diallo, Seydou; Ehouman, Serge K.; Koffi, Thierry; Zamblé Trabi, Armand; Lazare, Kouakou; Paturel, Jean Emmanuel; Perrin, Jean-Louis; Salles, Christian; Seguis, Luc; Tournoud, Marie-George; Karoui, Hela

    2016-04-01

    With more than 6 million inhabitants, Abidjan district faces tremendous difficulties in water supply. The aquifer of the Continental Terminal which is actually the only drinking water source of the city shows a decline of resources and water demand is increasing due to the population growth. Moreover significant evidences of chemical and biological pollution of the groundwater are observed The Aghien lagoon, the largest freshwater pool located near Abidjan, has been identified by the State of Côte d'Ivoire as a potential resource for the production of drinking water.. The main objective of this project is to assess the quantitative and qualitative capacity of the Aghien lagoon to complement the water supply of Abidjan city in the near future. The main components of the project are: • to assess the water budget of the lagoon and its tributaries, • to characterize the spatial and temporal variability of contaminant levels and fluxes from the tributaries toward the lagoon, • to assess the sustainability of the water resources (quantity and quality) of the lagoon according to land use changes in the catchments . The project started in January 2015. The first year was devoted to the set-up of hydro-meteorological gauges within the lagoon watershed. Three major tributaries of the lagoon are considered, the Mé (4000 km2), the Djibi (78 km2) and Bete (206 km2) rivers. Since the start of the project, bi-monthly hydrochemical sampling surveys have been carried out along the tributaries and in the lagoon. The data available from the surveys concern the physico-chemical parameters, trace elements, all the forms of nitrogen and phosphorus, organic carbon, suspended solids. The Djibi and Bete watersheds are partly urbanized while the Mé basin is mainly rural. Baseflow has been identified as the major contribution to streamflow at the annual scale. The Mé flows into a channel downstream to the Aghien lagoon but during the floods, water from the Mé River can flow up the

  12. Borehole-explosion and air-gun data acquired in the 2011 Salton Seismic Imaging Project (SSIP), southern California: description of the survey

    Science.gov (United States)

    Rose, Elizabeth J.; Fuis, Gary S.; Stock, Joann M.; Hole, John A.; Kell, Annie M.; Kent, Graham; Driscoll, Neal W.; Goldman, Mark; Reusch, Angela M.; Han, Liang; Sickler, Robert R.; Catchings, Rufus D.; Rymer, Michael J.; Criley, Coyn J.; Scheirer, Daniel S.; Skinner, Steven M.; Slayday-Criley, Coye J.; Murphy, Janice M.; Jensen, Edward G.; McClearn, Robert; Ferguson, Alex J.; Butcher, Lesley A.; Gardner, Max A.; Emmons, Iain; Loughran, Caleb L.; Svitek, Joseph R.; Bastien, Patrick C.; Cotton, Joseph A.; Croker, David S.; Harding, Alistair J.; Babcock, Jeffrey M.; Harder, Steven H.; Rosa, Carla M.

    2013-01-01

    The Imperial and Coachella Valleys are being formed by active plate-tectonic processes. From the Imperial Valley southward into the Gulf of California, plate motions are rifting the continent apart. In the Coachella Valley, the plates are sliding past one another along the San Andreas and related faults (fig. 1). These processes build the stunning landscapes of the region, but also produce damaging earthquakes. Rupture of the southern section of the San Andreas Fault (SAF), from the Coachella Valley to the Mojave Desert, is believed to be the greatest natural hazard that California will face in the near future. With an estimated magnitude between 7.2 and 8.1, such an event would result in violent shaking, loss of life, and disruption of infrastructure (freeways, aqueducts, power, petroleum, and communication lines) that might bring much of southern California to a standstill. As part of the nation’s efforts to avert a catastrophe of this magnitude, a number of projects have been undertaken to more fully understand and mitigate the effects of such an event. The Salton Seismic Imaging Project (SSIP), funded jointly by the National Science Foundation (NSF) and the U.S. Geological Survey (USGS), seeks to understand, through seismic imaging, the structure of the Earth surrounding the SAF, including the sedimentary basins on which cities are built. The principal investigators (PIs) of this collaborative project represent the USGS, Virginia Polytechnic Institute and State University (Virginia Tech), California Institute of Technology (Caltech), Scripps Institution of Oceanography (Scripps), University of Nevada, Reno (UNR), and Stanford University. SSIP will create images of underground structure and sediments in the Imperial and Coachella Valleys and adjacent mountain ranges to investigate the earthquake hazards posed to cities in this area. Importantly, the images will help determine the underground geometry of the SAF, how deep the sediments are, and how fast

  13. The GRAAL project

    Science.gov (United States)

    Plaga, Rainer

    The GRAAL Project (Gamma Ray Astronomy at ALmeria) makes use of the CESA-1 heliostat field at the "Plataforma Solar de Almeria" (Spain) as a gamma-ray telescope with an energy threshold of about 100 GeV. Cherenkov light generated by EAS is reflected by the heliostats and collected into photomultipliers (PMTs) with nonimaging secondary optics. Each PMT collects the light reflected by 13 - 18 heliostats of 40 m2 using a Winston cone. After successful tests with two collecting cones, a more advanced setup on a dedicated platform, using four collectors and 63 heliostats (total reflecting area of about 2500 m2 ) is being installed. A description of this setup together with Monte Carlo results about its excellent capabilities in the precise determination of pulse arrival times are presented.

  14. The Cadaveric Skin Biopsy Project: description and student evaluation of an innovative approach to dermatology instruction in the preclerkship medical school curriculum.

    Science.gov (United States)

    Baker, Mary Grace; Bradley, Elizabeth B; McCollum, Melanie A; Russell, Mark A

    2014-08-01

    Dermatology can develop creative ways of participating in the preclerkship medical school curriculum. We sought to describe and report student survey results of a novel collaborative learning activity for medical students, directed by dermatology, histology, and gross anatomy faculty, which used cadavers to replicate the process of skin lesion biopsy and provided a realistic setting in which to learn normal-appearing and abnormal skin histology. First-year medical students were surveyed regarding the impact of this activity on their understanding of skin histology and their appreciation of dermatology and dermatologic procedures. Students were appreciative of the opportunity to perform biopsies and discover the link between the clinical presentation of a lesion and its underlying histopathology. They were less impressed with the ability of the activity to improve their understanding of the characteristics of benign versus malignant lesions. This is an early feasibility trial at 1 institution. This project represents one approach to introducing students to dermatology and dermatologic procedures and achieves institutional, Liaison Committee on Medical Education, and Association of American Medical Colleges educational goals. Overall, students highly valued the opportunities to practice clinical procedures and found it aided their understanding and appreciation of dermatology. Copyright © 2014 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  15. Use cases versus task descriptions

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    to specify require-ments for the same project: Acquire a new system to support a hotline. [Princi-pal ideas/results] Among the 15 replies, eight used traditional use cases that specified a dialog between users and system. Seven used a related technique, task description, which specified the customer's needs...

  16. Reports on 1979 result of Sunshine Project. Investigation and research on solar energy utilization system (solar thermal power generation system); 1979 nendo taiyo energy riyo system chosa kenkyu. Taiyoko hatsuden system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-03-01

    In connection with the practicability of a solar thermal power generation system, examination was made on the technical economic problems and the operation method as well as on the problems of required performance of the constituent equipment, with the measuring method and performance evaluation method examined that are suitable for various devices. The items for the examination are as follows: (1) Silicon as the raw material for solar cells and its R and D, (2) Amorphous silicon solar cells, (3) R and D on low cost solar cells and array, (4) Basic design for photovoltaic generation system, and (5) Problems and technical subjects for solar cell standard measurement. The research themes and items for the above examination are listed as below: (1) Demand trend for raw material silicon, overseas trend, and development plan for polycrystalline silicon; (2) R and D plan for amorphous Si solar cell and its system, their optimum design, and their cost analysis and economic effect; (3) Technological investigation on cells and examination on array; (4) Basic design, peripheral equipment for system, and development schedule; (5) Report on the first actual state investigation concerning instrumentation of solar cells, i.e., on 'instrumentation and deviation in transformation efficiency', calibration system, problems of instrumentation of new device, problems of reliability test method, situation in various countries, and trend in atmospheric turbidimeter. (NEDO)

  17. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  18. Projecting regional climate and cropland changes using a linked biogeophysical-socioeconomic modeling framework: 1. Model description and an equilibrium application over West Africa

    Science.gov (United States)

    Wang, Guiling; Ahmed, Kazi Farzan; You, Liangzhi; Yu, Miao; Pal, Jeremy; Ji, Zhenming

    2017-03-01

    Agricultural land use alters regional climate through modifying the surface mass, energy, and momentum fluxes; climate influences agricultural land use through their impact on crop yields. These interactions are not well understood and have not been adequately considered in climate projections. This study tackles the critical linkages within the coupled natural-human system of West Africa in a changing climate based on an equilibrium application of a modeling framework that asynchronously couples models of regional climate, crop yield, multimarket agricultural economics, and cropland expansion. Using this regional modeling framework driven with two global climate models, we assess the contributions of land use change (LUC) and greenhouse gas (GHGs) concentration changes to regional climate changes and assess the contribution of climate change and socioeconomic factors to agricultural land use changes. For future cropland expansion in West Africa, our results suggest that socioeconomic development would be the dominant driver in the east (where current cropland coverage is already high) and climate changes would be the primary driver in the west (where future yield drop is severe). For future climate, it is found that agricultural expansion would cause a dry signal in the west and a wet signal in the east downwind, with an east-west contrast similar to the GHG-induced changes. Over a substantial portion of West Africa, the strength of the LUC-induced climate signals is comparable to the GHG-induced changes. Uncertainties originating from the driving global models are small; human decision making related to land use and international trade is a major source of uncertainty.

  19. Solar Features - Solar Flares

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A solar flare is a short-lived sudden increase in the intensity of radiation emitted in the neighborhood of sunspots. For many years it was best monitored in the...

  20. A Review of Solar Desiccant Air Conditioner

    OpenAIRE

    Dr. U. V. Kongre, D. P. Mahure, P. A. Zamre

    2014-01-01

    This paper represents a detailed study and description of a new solar-based air-conditioning technique. It uses solar energy to produce cold or hot air. This technology can be used to reduce the energy consumption and environmental impact of mechanical cooling system. The use of Desiccant cooling is used to perform air dehumidification operation by utilizing low grade heat source. The solar desiccant air conditioner uses solar power as the main energy source to...

  1. SolarChill - a solar PV refrigerator without battery

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, P.H.; Poulsen, S.; Katic, I. [Danish Technological Inst., Taastrup (Denmark)

    2004-07-01

    A solar powered refrigerator (SolarChill) has been developed in an international project involving Greenpeace International, GTZ, UNICEF, UNEP, WHO, industrial partners and Danish Technological Institute. The refrigerator is able to operate directly on solar PV panels, without battery or additional electronics, and is therefore suitable for locations where little maintenance and reliable operation is mandatory. The main objective of the SolarChill Project is to help deliver vaccines and refrigeration to the rural poor. To achieve this objective, the SolarChill Project developed - and plans to make freely available a versatile refrigeration technology that is environmentally sound, technologically reliable, and affordable. SolarChill does not use any fluorocarbons in its cooling system or in the insulation. For domestic and small business applications, another type of solar refrigerator is under development. This is an upright type, suitable for cool storage of food and beverages in areas where grid power is non-existent or unstable. The market potential for this type is thus present in industrialised countries as well as in countries under development. The unique feature of SolarChill is that energy is stored in ice instead of in batteries. An ice compartment keeps the cabinet at desired temperatures during the night. The paper describes the product development, possible SolarChill applications and experience with the two types of solar refrigerators, as well as results from the laboratory and field test. (orig.)

  2. A Little Solar Story

    DEFF Research Database (Denmark)

    Ahmad, Bashir

    1997-01-01

    Experiences from use of solar cookers in India and many other places are different. But the story which is based on a field study in Gujarat state of India shows that during last twenty years there has been a tendency that many families do not continue to use their solar cookers. The study shows...... that the tendency is related with the lack of compatibility of this new technology (solar cooker) with the everyday real-life conditions of the families. In principle the findings are supported by an evaluation report on a solar cooker project in Burkina Faso. The conclusion is that the user should be involved...... in the solar cooker technological development process....

  3. Solar thermal conversion

    Science.gov (United States)

    Selcuk, M. K.

    1978-01-01

    A brief review of the fundamentals of the conversion of solar energy into mechanical work (or electricity via generators) is given. Both past and present work on several conversion concepts are discussed. Solar collectors, storage systems, energy transport, and various types of engines are examined. Ongoing work on novel concepts of collectors, energy storage and thermal energy conversion are outlined and projections for the future are described. Energy costs for various options are predicted and margins and limitations are discussed.

  4. The sun, the solar wind, and the heliosphere

    CERN Document Server

    Miralles, Mari Paz

    2011-01-01

    This volume presents a concise, up-to-date overview of current research on the observations, theoretical interpretations, and empirical and physical descriptions of the Sun, the Solar Wind, and the Heliosphere, from the solar interior outward to the planets.

  5. 76 FR 78021 - Notice of Availability of the Record of Decision for the Rice Solar Energy, LLC, Rice Solar...

    Science.gov (United States)

    2011-12-15

    ... Bureau of Land Management Notice of Availability of the Record of Decision for the Rice Solar Energy, LLC, Rice Solar Energy Project (RSEP) and California Desert Conservation Area Plan Amendment, California...: Rice Solar Energy, LLC, a subsidiary of SolarReserve, LLC plans to construct a 150 megawatt (MW) solar...

  6. Colorado State University Program for developing, testing, evaluating and optimizing solar heating and cooling systems. Project status report, August--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hittle, D.C.

    1994-11-01

    The current work has been to validate Florida Solar Energy Center`s models of the Solahart 302K and 302K-AS systems to prepare a rating for the Sacramento Municipal Utility District`s rebate program for solar domestic hot water heaters.

  7. Development and validation of HELLAZ1 detector, contribution to the project HELLAZ concerning the detection of solar neutrinos; Developpement et mise au point du detecteur HELLAZ1: elaboration du projet HELLAZ pour la detection des neutrinos solaires

    Energy Technology Data Exchange (ETDEWEB)

    Gagliardi, N

    2001-09-01

    The HELLAZ project is dedicated to the measurement of low energy solar neutrinos, this neutrino detection is based on the measurement of the characteristics of all the ionization electrons produced by the recoil of the electron with which the solar neutrino has collided. The detector is made of a tank full of gaseous helium whose conditions of temperature and pressure (77 K and 5 bar) are important to assure a sufficient statistic. 11 events a day are expected to be detected. In this work we present the preliminary results obtained on the first prototype (HELLAZ0) that has allowed us to test 2 types of chambers: multiwire proportional chamber (MWPC) and a micro gas chamber combined to a gas electron multiplier (MGC+GEM). A new prototype (HELLAZ1) has been designed, its aim is to measure an elementary track of only 2 ionization electrons and to test 2 new chambers: micro gas wire chamber (MGWC) and Micromegas. The first chapter deals with the sun, solar neutrinos, and the neutrino characteristics that are expected from the sun standard model. The second chapter is dedicated to the various experiments of solar neutrino detection and to their experimental result disagreement. The HELLAZ project is described in the third chapter. The fourth chapter presents the different experimental constraints, particularly the processing of the background noise and the counting of each electron of the ionization cloud. In the last chapter HELLAZ0 and HELLAZ1 projects are described and we show that microstructure-type chambers are the best suitable for this kind of detection. (A.C.)

  8. Solar car (2); Soraka (2)

    Energy Technology Data Exchange (ETDEWEB)

    Dujinaka, Masaharu [Tokyo Denki University, Tokyo (Japan)

    1999-01-31

    (87) The running performance of solar car for the game. The second report:' The running performance in 98 WSR in Akita. (88) Output characteristics of solar cell mounted small motor car. (89) The development research of electric automobile for second car. (Part 1: The development objective and basic consideration.) (90) Trial manufacture of nickel, hydrogen battery and application to the solar automobile. (91) Solar wheelchair (2). Electric automobile (EV) is noticed from the environmental problem. EV which required the energy source for a solar cell output is a solar car. 2 and 3 miniature EV application were announced for the optimum lace for the solar car development in this session. The estimated result of solar car which won championship by the high improvement result at '98 WSR in AKITA be shown by the for lace. And, the solar car of latest nickel, hydrogen battery installation produced experimentally in the university laboratory was also announced, and trial manufacture and characteristics of the battery were shown. It was supposed at the content the description which the enjoyment of solar car race matched the engineering education in working. The application to the small automobile was the report of the high contribution effect by the solar cell panel installation in trial manufacture of second car EV and roof of wheelchair EV. In 2015 years in our country, 1 person was a lecture as miniature EV became 4 persons for old people society of over of 65-year-old with the need. (translated by NEDO)

  9. Solar: California, not dreaming

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.

    2006-03-15

    The California Solar Initiative (CSI) was approved by the California Public Utilities Commission (PUC) in January 2006. The CSI is the largest solar programme of this kind ever in the USA and provides for $3.2 billion in incentives for solar projects between 2007 and 2017. The PUC will oversee a $2.5 billion programme to provide funding for solar installations on commercial and existing residential buildings, while the California Energy Commission (CEC) will manage a separate $350 million fund targeted at new residential building. Existing solar programmes operated by the PUC and CEC will be consolidated into the CSI. The CEC programme will use already allocated funding, but the PUC programme will be funded through revenues collected from customers of the main gas and electric utilities in California. Funds will be distributed via rebates to householders or companies that install solar. As well as solar photovoltaics (PV), rebates will also go to solar thermal power (concentrating solar power) and solar heating and cooling. CSI funding can be used in combination with existing federal tax credits. The aim is a gradual increase from installation of 40 MW of PV in 2005 to 100 MW by 2009. The CSI is also expected to create favourable market conditions for PV manufacturers in California and to encourage investment in production of solar-grade silicon in or near California. Objections from the International Brotherhood of Electrical Workers (IBEW) appear to have been overcome but a number of other potential snags remain. CSI is expected to be replicated in other US states.

  10. Solar industrial process heat

    Energy Technology Data Exchange (ETDEWEB)

    Lumsdaine, E.

    1981-04-01

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  11. Characterization of solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Haerkoenen, J.; Tuominen, E.; Nybergh, K.; Ezer, Y.; Yli-Koski, M.; Sinkkonen, J. [Helsinki Univ. of Technology, Otaniemi (Finland). Dept. of Electrical and Communications Engineering

    1998-10-01

    Photovoltaic research in the Electron Physics Laboratory started in 1993, when laboratory joined the national TEKES/NEMO 2 research program. Since the beginning of the project, characterization as well as experimentally orientated development of the fabrication process of the solar cells were carried out parallery. The process development research started by the initiatives of the Finnish industry. At the moment a large amount of the laboratory personnel works on solar cell research and the financing comes mainly from external projects. The funding for the research has come from TEKES, Ministry of Education, Finnish Academy, GETA graduate school, special equipment grants of the university, and from the laboratory

  12. Solar Energy.

    Science.gov (United States)

    Eaton, William W.

    Presented is the utilization of solar radiation as an energy resource principally for the production of electricity. Included are discussions of solar thermal conversion, photovoltic conversion, wind energy, and energy from ocean temperature differences. Future solar energy plans, the role of solar energy in plant and fossil fuel production, and…

  13. 76 FR 28064 - Notice of Availability of the Final Environmental Impact Statement for Palen Solar I, LLC's Palen...

    Science.gov (United States)

    2011-05-13

    ... Solar I, LLC's Palen Solar Power Plant (PSPP) and Proposed California Desert Conservation Area Plan... (EIS) for the Palen Solar Power Plant project and by this notice is announcing its availability. DATES.../palmsprings/Solar_Projects/Palen_Solar_Power_Project.html . All protests must be in writing and mailed to one...

  14. Drainback solar thermal systems

    DEFF Research Database (Denmark)

    Botpaev, R.; Louvet, Y.; Perers, Bengt

    2016-01-01

    Although solar drainback systems have been used for a long time, they are still generating questions regarding smooth functioning. This paper summarises publications on drainback systems and compiles the current knowledge, experiences, and ideas on the technology. The collective research exhibits...... of this technology has been developed, with a brief description of each hydraulic typology. The operating modes have been split into three stages: filling, operation, and draining, which have been studied separately. A difference in the minimal filling velocities for a siphon development in the solar loop has been...

  15. Solar energy

    Science.gov (United States)

    Rapp, D.

    1981-01-01

    The book opens with a review of the patterns of energy use and resources in the United States, and an exploration of the potential of solar energy to supply some of this energy in the future. This is followed by background material on solar geometry, solar intensities, flat plate collectors, and economics. Detailed attention is then given to a variety of solar units and systems, including domestic hot water systems, space heating systems, solar-assisted heat pumps, intermediate temperature collectors, space heating/cooling systems, concentrating collectors for high temperatures, storage systems, and solar total energy systems. Finally, rights to solar access are discussed.

  16. An LED-Based, Laboratory-Scale Solar Simulator for Advanced 3, 4, 5 & 6 Junction Space Photovoltaic Power Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — As a result of significant technical effort, the Phase I was successful in delivering a solar simulator prototype that not only proved the initial concept but will...

  17. Solar energy applications in Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Ilenikhena, P.A.; Ezemonye, L.I.N.

    2010-09-15

    Solar radiation being abundantly present in Nigeria was one area of focus in renewable energy sources. Researches were carried out and technologies produced for direct harnessing of the energy in six energy centres across the country. Some state governments in collaboration with non-governmental agencies also sponsored solar energy projects in some villages that are not connected to the national grid.

  18. 44 CFR 361.3 - Project description.

    Science.gov (United States)

    2010-10-01

    ... and water supplies; (ix) Public health and information services; (x) Post-disaster recovery and the... a particular area; and vulnerability assessments, also known as loss estimation studies, which... following: (1) The availability of information regarding identification of seismic hazards and vulnerability...

  19. Solar radiation and thermal performance of solar collectors for Denmark

    DEFF Research Database (Denmark)

    Dragsted, Janne; Furbo, Simon

    This report describes the part of the EUDP project “EUDP 11-l, Solar Resource Assessment in Denmark”, which is carried out at Department of Civil Engineering, Technical University of Denmark.......This report describes the part of the EUDP project “EUDP 11-l, Solar Resource Assessment in Denmark”, which is carried out at Department of Civil Engineering, Technical University of Denmark....

  20. Solar Imagery - White Light - ISOON

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Improved Solar Observing Optical Network (ISOON) project is a collaboration between the Air Force Research Laboratory Space Vehicles Directorate and the National...