Self-shielding phenomenon modelling in multigroup transport code Apollo-2; Modelisation du phenomene d'autoprotection dans le code de transport multigroupe Apollo 2

Energy Technology Data Exchange (ETDEWEB)

Coste-Delclaux, M

2006-03-15

This document describes the improvements carried out for modelling the self-shielding phenomenon in the multigroup transport code APOLLO2. They concern the space and energy treatment of the slowing-down equation, the setting up of quadrature formulas to calculate reaction rates, the setting-up of a method that treats directly a resonant mixture and the development of a sub-group method. We validate these improvements either in an elementary or in a global way. Now, we obtain, more accurate multigroup reaction rates and we are able to carry out a reference self-shielding calculation on a very fine multigroup mesh. To end, we draw a conclusion and give some prospects on the remaining work. (author)

Evaluación de déficit de atención con hiperactividad: la escala SNAP IV adaptada a la Argentina Assessment of attention deficit hyperactivity: SNAP-IV scale adapted to Argentina

Directory of Open Access Journals (Sweden)

Nora Grañana

2011-05-01

Full Text Available OBJETIVO: Valorar la utilidad de la escala SNAP IV como instrumento de detección de trastorno por déficit de atención con hiperactividad (TDAH en niños argentinos de 4 a 14 años de edad. MÉTODOS: Se adaptó y se administró la escala SNAP IV a un grupo de 1 230 escolares de la provincia de Buenos Aires, Argentina. Se determinó el diagnóstico con el control clínico de acuerdo a los criterios del Manual diagnóstico y estadístico de los trastornos mentales, 4.ª edición. Se determinaron la sensibilidad y especificidad así como los puntajes de corte para la escala SNAP IV en la población estudiada. RESULTADOS: Se estableció el puntaje en la escala SNAP IV que tuviera la mejor correlación entre sensibilidad y especificidad para determinar los casos verdaderos positivos que realmente tuvieran un diagnóstico clínico. Los puntajes de corte obtenidos fueron: un índice de 1,66 (15/27 puntos para la subescala déficit de atención y de 1,77 (16/27 puntos para hiperactividadimpulsividad en la población estudiada. CONCLUSIONES: La escala SNAP IV para detección de TDAH se considera válida en el caso de la población estudiada, siempre y cuando se modifiquen los puntajes de corte para obtener la mejor relación sensibilidad/especificidad, con base en las particularidades culturales y socioeconómicas de dicha población.OBJECTIVE: Assess the usefulness of the SNAP-IV scale as an instrument for detecting attention deficit hyperactivity disorder (ADHD in Argentine children aged 4 to 14 years. METHODS: The SNAP-IV scale was adapted and administered to a group of 1 230 schoolchildren in the province of Buenos Aires, Argentina. The diagnosis was determined with the clinical control, based on the criteria of the Diagnostic and Statistical Manual of Mental Disorders, 4th edition. The sensitivity and specificity, as well as the cut-off scores for the SNAP-IV scale in the population studied, were determined. RESULTS: The score on the SNAP-IV scale

Ubuntu Core Snaps for Science

Science.gov (United States)

Wyngaard, J.

2017-12-01

A key challenge in the burgeoning sector of IoT (Internet of Things) is ensuring device and communication security. Ubuntu Core's approach to this is the use of 'snaps'. Along side this growth, scientists are increasingly utilising the many new low cost sensors now available. This work prototypes the use of snaps as a possible avenue to reducing the barrier to entry for scientific use of these low cost sensors while also ensuring proper meta-data is captured. Snaps are contained applications that have been signed. This means that a snap application is unable to read or write to any area of the system beyond its assigned reach, thereby significantly limiting the possible impact of any break in security higher up the stack. Further, application and system updates are automatically verified as authentic before being applied. Additionally, on an embedded system running Ubuntu Core the hardware interface (Gadget), kernel, and OS (Core) are all also snaps and therefore also have acquired these same gains. The result is an architecture that enables: (1) Secure, robust, remote automatic updates of both the OS and applications. (2) A user friendly deployment mechanism.(3) A easy to maintain means of supporting multiple platforms. The above is primarily targeted at non-academic domains, however, it is proposed that the Scientific community can benefit from it too. This work therefore prototypes a snap for sensors on board a small Unmanned Aircraft System (sUAS). For demonstration purposes this snap specifically targets connecting a popular low cost CO2 meter to a Raspberry Pi3 and the popular open source sUAS autopilot Arducopter.

MC²-3: Multigroup Cross Section Generation Code for Fast Reactor Analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, C. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Yang, W. S. [Argonne National Lab. (ANL), Argonne, IL (United States)

2013-11-08

The MC²-3 code is a Multigroup Cross section generation Code for fast reactor analysis, developed by improving the resonance self-shielding and spectrum calculation methods of MC²-2 and integrating the one-dimensional cell calculation capabilities of SDX. The code solves the consistent P1 multigroup transport equation using basic neutron data from ENDF/B data files to determine the fundamental mode spectra for use in generating multigroup neutron cross sections. A homogeneous medium or a heterogeneous slab or cylindrical unit cell problem is solved in ultrafine (~2000) or hyperfine (~400,000) group levels. In the resolved resonance range, pointwise cross sections are reconstructed with Doppler broadening at specified isotopic temperatures. The pointwise cross sections are directly used in the hyperfine group calculation whereas for the ultrafine group calculation, self-shielded cross sections are prepared by numerical integration of the pointwise cross sections based upon the narrow resonance approximation. For both the hyperfine and ultrafine group calculations, unresolved resonances are self-shielded using the analytic resonance integral method. The ultrafine group calculation can also be performed for two-dimensional whole-core problems to generate region-dependent broad-group cross sections. Multigroup cross sections are written in the ISOTXS format for a user-specified group structure. The code is executable on UNIX, Linux, and PC Windows systems, and its library includes all isotopes of the ENDF/BVII. 0 data.

Targeting of SNAP-23 and SNAP-25 in polarized epithelial cells

NARCIS (Netherlands)

Low, SH; Roche, PA; Anderson, HA; van Ijzendoorn, SCD; Zhang, M; Mostov, KE; Weimbs, T

1998-01-01

SNAP-23 is the ubiquitously expressed homologue of the neuronal SNAP-25, which functions in synaptic vesicle fusion, We have investigated the subcellular localization of SNAP-23 in polarized epithelial cells, In hepatocyte-derived HepG2 cells and in Madin-Darby canine kidney (MDCK) cells, the

FENDL multigroup libraries

International Nuclear Information System (INIS)

Ganesan, S.; Muir, D.W.

1992-01-01

Selected neutron reaction nuclear data libraries and photon-atomic interaction cross section libraries for elements of interest to the IAEA's program on Fusion Evaluated Nuclear Data Library (FENDL) have been processed into MATXSR format using the NJOY system on the VAX4000 computer of the IAEA. This document lists the resulting multigroup data libraries. All the multigroup data generated are available cost-free upon request from the IAEA Nuclear Data Section. (author). 9 refs

3-DB, 3-D Multigroup Diffusion, X-Y-Z, R-Theta-Z, Triangular-Z Geometry, Fast Reactor Burnup

International Nuclear Information System (INIS)

Hardie, R.W.; Little, W.W. Jr.; Mroz, W.

1974-01-01

1 - Description of problem or function: 3DB is a three-dimensional (x-y-z, r-theta-z, triangular-z) multigroup diffusion code for use in detailed fast-reactor criticality and burnup analysis. The code can be used to - (a) compute k eff and perform criticality searches on time absorption, reactor composition, and reactor dimensions by means of either a flux or an adjoint model, (b) compute material burnup using a flexible material shuffling scheme, and (c) compute flux distributions for an arbitrary extraneous source. 2 - Method of solution: Eigenvalues are computed by standard source- iteration techniques. Group re-balancing and successive over-relaxation with line inversion are used to accelerate convergence. Adjoint solutions are obtained by inverting the input data and redefining the source terms. Material burnup is by reactor zone. The burnup rate is determined by the zone and energy-averaged cross sections which are recomputed after each time-step. The isotopic chains, which can contain any number of isotopes are formed by the user. The code does not contain built- in or internal chains. 3 - Restrictions on the complexity of the problem: Since variable dimensioning is employed, no simple bounds can be stated

SNAP operating system reference manual

International Nuclear Information System (INIS)

Sabuda, J.D.; Polito, J.; Walker, J.L.; Grant, F.H. III.

1982-03-01

The SNAP Operating System (SOS) is a FORTRAN 77 program which provides assistance to the safeguards analyst who uses the Safeguards Automated Facility Evaluation (SAFE) and the Safeguards Network Analysis Procedure (SNAP) techniques. Features offered by SOS are a data base system for storing a library of SNAP applications, computer graphics representation of SNAP models, a computer graphics editor to develop and modify SNAP models, a SAFE-to-SNAP interface, automatic generation of SNAP input data, and a computer graphic post-processor for SNAP. The SOS Reference Manual provides detailed application information concerning SOS as well as a detailed discussion of all SOS components and their associated command input formats. SOS was developed for the US Nuclear Regulatory Commission's Office of Nuclear Regulatory Research and the US Naval Surface Weapons Center by Pritsker and Associates, Inc., under contract to Sandia National Laboratories

Dynamic ultrasound of the external snapping hip syndrome

International Nuclear Information System (INIS)

Choi, Yun Sun; Song, Baek Yong; Paik, Sang Hyun; Lee, Tae Gyu; Yoon, Yong Kyu; Lee, Sung Moon

2002-01-01

Snapping hip syndrome has been described as a hip pain accompanied by an audible snapping during motion of the hip or while walking. The variable causes of its external, internal, and intra-articular origins have been described. The most common extemal snapping hip has been associated with a thickened posterior border of the iliotibial band or of the anterior border of the gluteus maximus muscle slipping over the greater trochanter. The aim of this study was to evaluate the dynamic ultrasound findings of external snapping hip syndrome with review of the literature. We studied 5 patients (7 cases) with external snapping hip and pain over the greater trochanter during walking or hip motion (3 males and 2 females, age range, 14-32 years; mean, 19 years). Two patients reported bilateral snapping hips.

The program FEM3D users manual

International Nuclear Information System (INIS)

Misfeldt, I.

1977-11-01

A short description of the program FEM3D that solves the three-dimensional, multigroup, neutron diffusion equation by the finite element method. The elements are box-formed Lagrange type elements of order 1, 2, or 3. The program gives very reliable results within reasonable calculation times, but it is not a fast program and should therefore mostly be used where high precision is needed. (author/BP)

Comparison of CLASS and ITK-SNAP in segmentation of urinary bladder in CT urography

Science.gov (United States)

Cha, Kenny; Hadjiiski, Lubomir; Chan, Heang-Ping; Caoili, Elaine M.; Cohan, Richard H.; Zhou, Chuan

2014-03-01

We are developing a computerized method for bladder segmentation in CT urography (CTU) for computeraided diagnosis of bladder cancer. We have developed a Conjoint Level set Analysis and Segmentation System (CLASS) consisting of four stages: preprocessing and initial segmentation, 3D and 2D level set segmentation, and post-processing. In case the bladder contains regions filled with intravenous (IV) contrast and without contrast, CLASS segments the noncontrast (NC) region and the contrast (C) filled region separately and conjoins the contours. In this study, we compared the performance of CLASS to ITK-SNAP 2.4, which is a publicly available software application for segmentation of structures in 3D medical images. ITK-SNAP performs segmentation by using the edge-based level set on preprocessed images. The level set were initialized by manually placing a sphere at the boundary between the C and NC parts of the bladders with C and NC regions, and in the middle of the bladders that had only C or NC region. Level set parameters and the number of iterations were chosen after experimentation with bladder cases. Segmentation performances were compared using 30 randomly selected bladders. 3D hand-segmented contours were obtained as reference standard, and computerized segmentation accuracy was evaluated in terms of the average volume intersection %, average % volume error, average absolute % volume error, average minimum distance, and average Jaccard index. For CLASS, the values for these performance metrics were 79.0±8.2%, 16.1±16.3%, 19.9±11.1%, 3.5±1.3 mm, 75.7±8.4%, respectively. For ITK-SNAP, the corresponding values were 78.8±8.2%, 8.3±33.1%, 24.2±23.7%, 5.2±2.6 mm, 71.0±15.4%, respectively. CLASS on average performed better and exhibited less variations than ITK-SNAP for bladder segmentation.

SNAP Operating System (SOS) user's guide

International Nuclear Information System (INIS)

Sabuda, J.D.; Polito, J.; Walker, J.L.; Grant, F.H. III.

1982-03-01

The SNAP Operating System (SOS) is a FORTRAN 77 program which provides assistance to the safeguards analyst who uses the Safeguards Automated Facility Evaluation (SAFE) and the Safeguards Network Analysis Procedure (SNAP) techniques. Features offered by SOS are a data base system for storing a library of SNAP applications, computer graphics representation of SNAP models, a computer graphics editor to develop and modify SNAP models, a SAFE-to-SNAP interface, automatic generation of SNAP input data, and a computer graphics postprocessor for SNAP. The SOS User's Guide is designed to provide the user with the information necessary to use SOS effectively. Examples are used throughout to illustrate the concepts. The format of the user's guide follows the same sequence as would be used in executing an actual application

VARI-QUIR-3, 2-D Multigroup Steady-State Neutron Diffusion in X-Y R-Z or R-Theta Geometry

International Nuclear Information System (INIS)

Collier, George

1984-01-01

1 - Nature of physical problem solved: The steady-state, multigroup, two-dimensional neutron diffusion equations are solved in x-y, r-z, and r-theta geometry. 2 - Method of solution: A Gauss-Seidel type of solution with inner and outer iterations is used. The source is held constant during the inner iterations

The Multigroup Neutron Diffusion Equations/1 Space Dimension

Energy Technology Data Exchange (ETDEWEB)

Linde, Sven

1960-06-15

A description is given of a program for the Ferranti Mercury computer which solves the one-dimensional multigroup diffusion equations in plane, cylindrical or spherical geometry, and also approximates automatically a two-dimensional solution by separating the space variables. In section A the method of calculation is outlined and the preparation of data for two group problems is described. The spatial separation of two-dimensional equations is considered in section B. Section C covers the multigroup equations. These parts are self contained and include all information required for the use of the program. Details of the numerical methods are given in section D. Three sample problems are solved in section E. Punching and operating instructions are given in an appendix.

The Multigroup Neutron Diffusion Equations/1 Space Dimension

International Nuclear Information System (INIS)

Linde, Sven

1960-06-01

A description is given of a program for the Ferranti Mercury computer which solves the one-dimensional multigroup diffusion equations in plane, cylindrical or spherical geometry, and also approximates automatically a two-dimensional solution by separating the space variables. In section A the method of calculation is outlined and the preparation of data for two group problems is described. The spatial separation of two-dimensional equations is considered in section B. Section C covers the multigroup equations. These parts are self contained and include all information required for the use of the program. Details of the numerical methods are given in section D. Three sample problems are solved in section E. Punching and operating instructions are given in an appendix

A multi-level surface rebalancing approach for efficient convergence acceleration of 3D full core multi-group fine grid nodal diffusion iterations

International Nuclear Information System (INIS)

Geemert, René van

2014-01-01

Highlights: • New type of multi-level rebalancing approach for nodal transport. • Generally improved and more mesh-independent convergence behavior. • Importance for intended regime of 3D pin-by-pin core computations. - Abstract: A new multi-level surface rebalancing (MLSR) approach has been developed, aimed at enabling an improved non-linear acceleration of nodal flux iteration convergence in 3D steady-state and transient reactor simulation. This development is meant specifically for anticipating computational needs for solving envisaged multi-group diffusion-like SP N calculations with enhanced mesh resolution (i.e. 3D multi-box up to 3D pin-by-pin grid). For the latter grid refinement regime, the previously available multi-level coarse mesh rebalancing (MLCMR) strategy has been observed to become increasingly inefficient with increasing 3D mesh resolution. Furthermore, for very fine 3D grids that feature a very fine axial mesh as well, non-convergence phenomena have been observed to emerge. In the verifications pursued up to now, these problems have been resolved by the new approach. The novelty arises from taking the interface current balance equations defined over all Cartesian box edges, instead of the nodal volume-integrated process-rate balance equation, as an appropriate restriction basis for setting up multi-level acceleration of fine grid interface current iterations. The new restriction strategy calls for the use of a newly derived set of adjoint spectral equations that are needed for computing a limited set of spectral response vectors per node. This enables a straightforward determination of group-condensed interface current spectral coupling operators that are of crucial relevance in the new rebalancing setup. Another novelty in the approach is a new variational method for computing the neutronic eigenvalue. Within this context, the latter is treated as a control parameter for driving another, newly defined and numerically more fundamental

COMPAR: system to compare multigroup cross sections generated by NJOY, GROUPIE, FLANGE-II, ETOG-3 AND XLACS

International Nuclear Information System (INIS)

Anaf, J.; Chalhoub, E.S.

1987-11-01

A system, composed by the computer programs COMPAR and its interfaces, developed for comparing multigroup cross sections calculated by NJOY, GROUPIE, FLANGE-II, ETOG-3 and XLACS, is presented. (author)

Generating and verification of ACE-multigroup library for MCNP

International Nuclear Information System (INIS)

Chen Chaobin; Hu Zehua; Chen Yixue; Wu Jun; Yang Shouhai

2012-01-01

The Monte Carlo code MCNP can handle multigroup calculations and a sample multigroup set based on ENDF/B-V, MGXSNP, is available for MCNP for coupled neutron-photon transport. However, this library is not suit- able for all problems, and there is a need for users to be able to generate multigroup libraries tailored to their specific applications. For these purposes CSPT (cross section processing tool) is created to generate multigroup library for MCNP from deterministic multigroup cross sections (GENDF or ANISN format at present). Several ACE-multigroup libraries based on ENDF/B-VII.0 converted and verified in this work, we drawn the conclusion that the CSPT code works correctly and the libraries produced are credible. (authors)

The simplified P3 approach on a trigonal geometry in the nodal reactor code DYN3D

International Nuclear Information System (INIS)

Duerigen, S.; Fridman, E.

2011-01-01

DYN3D is a three-dimensional nodal diffusion code for steady-state and transient analyses of Light-Water Reactors with square and hexagonal fuel assembly geometries. Currently, several versions of the DYN3D code are available including a multi-group diffusion and a simplified P 3 (SP 3 ) neutron transport option. In this work, the multi-group SP 3 method based on trigonal-z geometry was developed. The method is applicable to the analysis of reactor cores with hexagonal fuel assemblies and allows flexible mesh refinement, which is of particular importance for WWER-type Pressurized Water Reactors as well as for innovative reactor concepts including block type High-Temperature Reactors and Sodium Fast Reactors. In this paper, the theoretical background for the trigonal SP 3 methodology is outlined and the results of a preliminary verification analysis are presented by means of a simplified WWER-440 core test example. The accordant cross sections and reference solutions were produced by the Monte Carlo code SERPENT. The DYN3D results are in good agreement with the reference solutions. The average deviation in the nodal power distribution is about 1%. (Authors)

SAFE/SNAP application to shipboard security

International Nuclear Information System (INIS)

Grady, L.M.; Walker, J.L.; Polito, J.

1981-11-01

An application of the combined Safeguards Automated Facility Evaluation/Safeguards Network Analysis Procedure (SAFE/SNAP) modeling technique to a physical protection system (PPS) aboard a generic ship is described. This application was performed as an example of how the SAFE and SNAP techniques could be used. Estimates of probability of interruption and neutralization for the example shipboard PPS are provided by SAFE as well as an adversary scenario, which serves as input to SNAP. This adversary scenario is analyzed by SNAP through four cases which incorporate increasingly detailed security force tactics. Comparisons between the results of the SAFE and SNAP analyses are made and conclusions drawn on the validity of each technique. Feedback from SNAP to SAFE is described, and recommendations for upgrading the ship based on the results of the SAFE/SNAP application are also discussed

Elementary chaotic snap flows

International Nuclear Information System (INIS)

Munmuangsaen, Buncha; Srisuchinwong, Banlue

2011-01-01

Highlights: → Five new elementary chaotic snap flows and a generalization of an existing chaotic snap flow have been presented. → Three of all are conservative systems whilst three others are dissipative systems. → Four cases need only a single control parameter and a single nonlinearity. → A cubic case in a jerk representation requires only two terms and a single nonlinearity. - Abstract: Hyperjerk systems with 4th-order derivative of the form x .... =f(x ... ,x .. ,x . ,x) have been referred to as snap systems. Five new elementary chaotic snap flows and a generalization of an existing flow are presented through an extensive numerical search. Four of these flows demonstrate elegant simplicity of a single control parameter based on a single nonlinearity of a quadratic, a piecewise-linear or an exponential type. Two others demonstrate elegant simplicity of all unity-in-magnitude parameters based on either a single cubic nonlinearity or three cubic nonlinearities. The chaotic snap flow with a single cubic nonlinearity requires only two terms and can be transformed to its equivalent dynamical form of only five terms which have a single nonlinearity. An advantage is that such a chaotic flow offers only five terms even though the (four) dimension is high. Three of the chaotic snap flows are characterized as conservative systems whilst three others are dissipative systems. Basic dynamical properties are described.

An improved method to prepare an injectable microemulsion of the galanin-receptor 3 selective antagonist, SNAP 37889, using Kolliphor® HS 15

Science.gov (United States)

Scheller, Karlene J.; Williams, Spencer J.; Lawrence, Andrew J.; Jarrott, Bevyn; Djouma, Elvan

2014-01-01

Research into the galanin-3 (GAL3) receptor has many challenges, including the lack of commercially available selective ligands. While the identification of non-peptidergic GAL3 receptor-selective antagonists, 1-phenyl-3-[3-(trifluoromethyl)phenyl]iminoindol-2-one (SNAP 37889) and 1-[3-(2-pyrrolidin-1-ylethoxy)phenyl]-3-[3-(trifluoromethyl)phenyl]iminoindol-2-one (SNAP 398299) have implicated a role for GAL3 receptors in anxiety, depression and drug-seeking behaviour, a major limitation of their use is poor aqueous solubility. Previously we have used 5% dimethylsulfoxide (DMSO) with 1% hydroxypropylmethyl cellulose in saline to dissolve SNAP 37889 for intraperitoneal (i.p.) injections of rats; however this produced a micro-suspension that was not ideal. The injectable formulation of SNAP 37889 was improved as follows:•30% (w/v) Kolliphor® HS 15 (Solutol HS® 15) and sodium phosphate buffer (0.01 M, pH 7.4) were used as vehicles.•A smooth glass mortar and pestle was used to triturate the Kolliphor® HS 15 and SNAP 37889 into a paste before addition to the sodium phosphate buffer at room temperature (RT).•The resulting mixture was vortexed until the paste was fully dissolved and the microemulsion was allowed to sit for 20 min to allow air bubbles to coalesce. PMID:26150955

The development of the code package PERMAK--3D//SC--1

International Nuclear Information System (INIS)

Bolobov, P. A.; Oleksuk, D. A.

2011-01-01

Code package PERMAK-3D//SC-1 was developed for performing pin-by-pin coupled neutronic and thermal hydraulic calculation of the core fragment of seven fuel assemblies and was designed on the basis of 3D multigroup pin-by-pin code PERMAK-3D and 3D (subchannel) thermal hydraulic code SC-1 The code package predicts axial and radial pin-by-pin power distribution and coolant parameters in stimulated region (enthalpies,, velocities,, void fractions,, boiling and DNBR margins).. The report describes some new steps in code package development. Some PERMAK-3D//SC-1 outcomes of WWER calculations are presented in the report. (Authors)

COMPAR: A system for comparing multigroup cross-sections generated by NJOY, GROUPIE, FLANGE-II, ETOG-3 and XLACS

International Nuclear Information System (INIS)

Anaf, J.; Chalhoub, E.S.

1988-02-01

A system consisting of the COMPAR computer program and its interfaces which was developed for comparing multigroup cross-sections generated by NJOY, GROUPIE, FLANGE-II, ETOG-3 and XLACS is presented. (author). 13 refs

SNAP Telescope Latest Developments

Science.gov (United States)

Lampton, M.; SNAP Collaboration

2004-12-01

The coming era of precision cosmology imposes new demands on space telescopes with regard to spectrophotometric accuracy and image stability. To meet these requirements for SNAP we have developed an all reflecting two-meter-class space telescope of the three-mirror anastigmat type. Our design features a large flat annular field (1.5 degrees = 580mm diameter) and a telephoto advantage of 6, delivering a 22m focal length within an optical package length of only 3.5 meters. The use of highly stable materials (Corning ULE glass and carbon-fiber reinforced cyanate ester resin for the metering structure) combined with agressive distributed thermal control and an L2 orbit location will lead to unmatched figure stability. Owing to our choice of rigid structure with nondeployable solar panels, finite-element models show no structural resonances below 10Hz. An exhaustive stray light study has been completed. Beginning in 2005, two industry studies will develop plans for fabrication, integration and test, bringing SNAP to a highly realistic level of definition. SNAP is supported by the Office of Science, US DoE, under contract DE-AC03-76SF00098.

Multigroup constants for charged particle elastic nuclear (plus interference) scattering of light isotopes

International Nuclear Information System (INIS)

Cullen, D.E.; Perkins, S.T.

1977-01-01

Multi-group averaged reaction rates and transfer matrices were calculated for charged particle induced elastic nuclear (plus interference) scattering. Results are presented using a ten group structure for all twenty-five permutations of projectile and target for the following charged particles: p, d, t, 3 He and alpha. Transfer matrices are presented in a simplified form for both incident projectile and the knock-ons; these matrices explicitly conserve energy

Multi-level nonlinear diffusion acceleration method for multigroup transport k-Eigenvalue problems

International Nuclear Information System (INIS)

Anistratov, Dmitriy Y.

2011-01-01

The nonlinear diffusion acceleration (NDA) method is an efficient and flexible transport iterative scheme for solving reactor-physics problems. This paper presents a fast iterative algorithm for solving multigroup neutron transport eigenvalue problems in 1D slab geometry. The proposed method is defined by a multi-level system of equations that includes multigroup and effective one-group low-order NDA equations. The Eigenvalue is evaluated in the exact projected solution space of smallest dimensionality, namely, by solving the effective one- group eigenvalue transport problem. Numerical results that illustrate performance of the new algorithm are demonstrated. (author)

SERKON program for compiling a multigroup library to be used in BETTY calculation

International Nuclear Information System (INIS)

Nguyen Phuoc Lan.

1982-11-01

A SERKON-type program was written to compile data sets generated by FEDGROUP-3 into a multigroup library for BETTY calculation. A multigroup library was generated from the ENDF/B-IV data file and tested against the TRX-1 and TRX-2 lattices with good results. (author)

On the convergence of multigroup discrete-ordinates approximations

International Nuclear Information System (INIS)

Victory, H.D. Jr.; Allen, E.J.; Ganguly, K.

1987-01-01

Our analysis is divided into two distinct parts which we label for convenience as Part A and Part B. In Part A, we demonstrate that the multigroup discrete-ordinates approximations are well-defined and converge to the exact transport solution in any subcritical setting. For the most part, we focus on transport in two-dimensional Cartesian geometry. A Nystroem technique is used to extend the discrete ordinates multigroup approximates to all values of the angular and energy variables. Such an extension enables us to employ collectively compact operator theory to deduce stability and convergence of the approximates. In Part B, we perform a thorough convergence analysis for the multigroup discrete-ordinates method for an anisotropically-scattering subcritical medium in slab geometry. The diamond-difference and step-characteristic spatial approximation methods are each studied. The multigroup neutron fluxes are shown to converge in a Banach space setting under realistic smoothness conditions on the solution. This is the first thorough convergence analysis for the fully-discretized multigroup neutron transport equations

Snapping plicae associated with radiocapitellar chondromalacia.

Science.gov (United States)

Antuna, S A; O'Driscoll, S W

2001-05-01

Painful snapping of the elbow joint is usually attributed to intra-articular loose bodies, instability, or medial dislocation of the triceps muscle over the medial epicondyle. We report our experience with 14 patients who were treated arthroscopically for snapping elbow that was found to be caused by hypertrophic synovial folds associated with radiocapitellar chondromalacia. Case series. The records of 14 patients who were treated arthroscopically for painful snapping elbows caused by intra-articular plicae were reviewed. There were 6 women and 8 men with an average age of 36 years (range, 27 to 48 years). Nine patients had had some type of trauma to the joint. Four patients had been previously diagnosed with lateral epicondylitis and 5 with intra-articular loose bodies. The average time from initial onset of symptoms to treatment was 13 months (range, 8 to 36 months). Average follow-up was 24 months (range, 6 to 66 months). All patients complained of painful snapping in the posterolateral or anterolateral aspect of the elbow. The snapping occurred between 90 degrees and 110 degrees of flexion with the forearm in pronation. In 7 patients, the snapping was reproducible by passively flexing the pronated elbow, which we refer to as the flexion-pronation test. At the time of arthroscopic surgery, all patients had a thickened synovial plica that would snap back and forward over the radial head, usually associated with a chondromalacic area on the radial head. Twelve patients had complete relief of their snapping after surgery. One patient in whom there was associated posterolateral rotatory elbow instability did not improve. One patient became asymptomatic for 4 years but then had recurrence of her symptoms, which persisted despite 2 subsequent arthroscopies. The presence of synovial plicae in the radiocapitellar joint must be considered in the differential diagnosis of painful snapping elbow. Arthroscopy confirms the diagnosis and allows excision of the plica.

Introduction of corrections taking into account interdependence of multigroup constants to the results of multigroup perturbation theory calculations

International Nuclear Information System (INIS)

Raskach, K. F.

2012-01-01

In multigroup calculations of reactivity and sensitivity coefficients, methodical errors can appear if the interdependence of multigroup constants is not taken into account. For this effect to be taken into account, so-called implicit components of the aforementioned values are introduced. A simple technique for computing these values is proposed. It is based on the use of subgroup parameters.

Approximate analytical solution of two-dimensional multigroup P-3 equations

International Nuclear Information System (INIS)

Matausek, M.V.; Milosevic, M.

1981-01-01

Iterative solution of multigroup spherical harmonics equations reduces, in the P-3 approximation and in two-dimensional geometry, to a problem of solving an inhomogeneous system of eight ordinary first order differential equations. With appropriate boundary conditions, these equations have to be solved for each energy group and in each iteration step. The general solution of the corresponding homogeneous system of equations is known in analytical form. The present paper shows how the right-hand side of the system can be approximated in order to derive a particular solution and thus an approximate analytical expression for the general solution of the inhomogeneous system. This combined analytical-numerical approach was shown to have certain advantages compared to the finite-difference method or the Lie-series expansion method, which have been used to solve similar problems. (author)

SNAP: Small Next-generation Atmospheric Probe Concept

Science.gov (United States)

Sayanagi, K. M.; Dillman, R. A.; Atkinson, D. H.; Li, J.; Saikia, S.; Simon, A. A.; Spilker, T. R.; Wong, M. H.; Hope, D.

2017-12-01

We present a concept for a small, atmospheric probe that could be flexibly added to future missions that orbit or fly-by a giant planet as a secondary payload, which we call the Small Next-generation Atmospheric Probe (SNAP). SNAP's main scientific objectives are to determine the vertical distribution of clouds and cloud-forming chemical species, thermal stratification, and wind speed as a function of depth. As a case study, we present the advantages, cost and risk of adding SNAP to the future Uranus Orbiter and Probe flagship mission; in combination with the mission's main probe, SNAP would perform atmospheric in-situ measurements at a second location, and thus enable and enhance the scientific objectives recommended by the 2013 Planetary Science Decadal Survey and the 2014 NASA Science Plan to determine atmospheric spatial variabilities. We envision that the science objectives can be achieved with a 30-kg entry probe 0.5m in diameter (less than half the size of the Galileo probe) that reaches 5-bar pressure-altitude and returns data to Earth via the carrier spacecraft. As the baseline instruments, the probe will carry an Atmospheric Structure Instrument (ASI) that measures the temperature, pressure and acceleration, a carbon nanotube-based NanoChem atmospheric composition sensor, and an Ultra-Stable Oscillator (USO) to conduct a Doppler Wind Experiment (DWE). We also catalog promising technologies currently under development that will strengthen small atmospheric entry probe missions in the future. While SNAP is applicable to multiple planets, we examine the feasibility, benefits and impacts of adding SNAP to the Uranus Orbiter and Probe flagship mission. Our project is supported by NASA PSDS3 grant NNX17AK31G.

Safeguards Network Analysis Procedure (SNAP): overview

International Nuclear Information System (INIS)

Chapman, L.D; Engi, D.

1979-08-01

Nuclear safeguards systems provide physical protection and control of nuclear materials. The Safeguards Network Analysis Procedure (SNAP) provides a convenient and standard analysis methodology for the evaluation of physical protection system effectiveness. This is achieved through a standard set of symbols which characterize the various elements of safeguards systems and an analysis program to execute simulation models built using the SNAP symbology. The outputs provided by the SNAP simulation program supplements the safeguards analyst's evaluative capabilities and supports the evaluation of existing sites as well as alternative design possibilities. This paper describes the SNAP modeling technique and provides an example illustrating its use

Research on GPU-accelerated algorithm in 3D finite difference neutron diffusion calculation method

International Nuclear Information System (INIS)

Xu Qi; Yu Ganglin; Wang Kan; Sun Jialong

2014-01-01

In this paper, the adaptability of the neutron diffusion numerical algorithm on GPUs was studied, and a GPU-accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. The IAEA 3D PWR benchmark problem was calculated in the numerical test. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. (authors)

Insecticide Efficacy and Timing for Control of Western Bean Cutworm (Lepidoptera: Noctuidae) in Dry and Snap Beans.

Science.gov (United States)

Goudis, L A; Trueman, C L; Baute, T S; Hallett, R H; Gillard, C L

2016-02-01

The western bean cutworm, Striacosta albicosta (Smith) (Lepidoptera: Noctuidae), is a recent pest of corn, dry,and snap beans, in the Great Lakes region, and best practices for its management in beans need to be established.Insecticide efficacy and application timing field studies, conducted in 2011–2013, determined that lambda-cyhalothrin and chlorantraniliprole were capable of reducing western bean cutworm feeding damage in dry beans from 2.3 to 0.4% in preharvest samples, and in snap beans from 4.8 to 0.1% of marketable pods, respectively. The best application timing in dry beans was determined to be 4–18 d after 50% egg hatch. No economic benefit was found when products were applied to dry beans, and despite high artificial inoculation rates, damage to marketable yield was relatively low. Thiamethoxam, methoxyfenozide, and spinetoram were also found to be effective at reducing western bean cutworm damage in dry bean to as low as 0.3% compared to an untreated control with 2.5% damaged pods. In snap beans, increased return on investment between CAD$400 and CAD$600 was seen with multiple applications of lambda-cyhalothrin, and with chlorantraniliprole applied 4 d after egg mass infestation.

Verification and validation of multi-group library MUSE1.0 created from ENDF/B-VII.0

International Nuclear Information System (INIS)

Chen Yixue; Wu Jun; Yang Shouhai; Zhang Bin; Lu Daogang; Chen Chaobin

2010-01-01

A multi-group library set named MUSE1.0 with 172-neutron group and 42-photon group is produced based on ENDF/B-VII.0 using NJOY code. Weight function of the multi-group library set is taken from the Vitanim-e library and the max legendre order of scattering matrix is six. All the nuclides have thermal scattering data created using free-gas scattering law and 10 Bondarenko background cross sections se lected to generate the self-shielded multi-group cross sections. The final libraries have GENDF-format, MATXS-format and ACE-multi-group sub-libraries and each sub-library generated under 4 temperatures(293 K,600 K,800 K and 900 K). This paper provides a summary of the procedure to produce the library set and a detail description of the validation of the multi-group library set by several critical benchmark devices and shielding benchmark devices using MCNP code. The ability to handle the thermal neutron transport and resonance self-shielding problems are investigated specially. In the end, we draw the conclusion that the multi-group libraries produced is credible and can be used in the R and D process of Supercritical Water Reactor Design. (authors)

Revised SNAP III Training Manual

Energy Technology Data Exchange (ETDEWEB)

Moss, Calvin Elroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gonzales, Samuel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nelson, Mark Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rothrock, Richard Brian [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Salazar, Samuel A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sorensen, Eric Byron [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sundby, Gary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-21

The Shielded Neutron Assay Probe (SNAP) technique was developed to determine the leakage neutron source strength of a radioactive object. The original system consisted of an Eberline^TM Mini-scaler and discrete neutron detector. The system was operated by obtaining the count rate with the Eberline^TM instrument, determining the absolute efficiency from a graph, and calculating the neutron source strength by hand. In 2003 the SNAP III, shown in Figure 1, was designed and built. It required the operator to position the SNAP, and then measure the source-to-detector and detectorto- reflector distances. Next the operator entered the distance measurements and started the data acquisition. The SNAP acquired the required count rate and then calculated and displayed the leakage neutron source strength (NSS). The original design of the SNAP III is described in SNAP III Training Manual (ER-TRN-PLN-0258, Rev. 0, January 2004, prepared by William Baird) This report describes some changes that have been made to the SNAP III. One important change is the addition of a LEMO connector to provide neutron detection output pulses for input to the MC-15. This feature is useful in active interrogation with a neutron generator because the MC-15 has the capability to only record data when it is not gated off by a pulse from the neutron generator. This avoids recording of a lot of data during the generator pulses that are not useful. Another change was the replacement of the infrared RS-232 serial communication output by a similar output via a 4-pin LEMO connector. The current document includes a more complete explanation of how to estimate the amount of moderation around a neutron-emitting source.

Procedure to Generate the MPACT Multigroup Library

Energy Technology Data Exchange (ETDEWEB)

Kim, Kang Seog [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-12-17

The CASL neutronics simulator MPACT is under development for the neutronics and T-H coupled simulation for the light water reactor. The objective of this document is focused on reviewing the current procedure to generate the MPACT multigroup library. Detailed methodologies and procedures are included in this document for further discussion to improve the MPACT multigroup library.

Development of 3D multi-group neutron diffusion code for hexagonal geometry

International Nuclear Information System (INIS)

Sun Wei; Wang Kan; Ni Dongyang; Li Qing

2013-01-01

Based on the theory of new flux expansion nodal method to solve the neutron diffusion equations, the intra-nodal fluence rate distribution was expanded in a series of analytic basic functions for each group. In order to improve the accuracy of calculation result, continuities of neutron fluence rate and current were utilized across the nodal surfaces. According to the boundary conditions, the iteration method was adopted to solve the diffusion equation, where inner iteration speedup method is Gauss-Seidel method and outer is Lyusternik-Wagner. A new speedup method (one-outer-iteration and multi-inner-iteration method) was proposed according to the characteristic that the convergence speed of multiplication factor is faster than that of neutron fluence rate and the update of inner iteration matrix is slow. Based on the proposed model, the code HANDF-D was developed and tested by 3D two-group vver440 benchmark, experiment 2 of HFETR, 3D four-group thermal reactor benchmark, and 3D seven-group fast reactor benchmark. The numerical results show that HANDF-D can predict accurately the multiplication factor and nodal powers. (authors)

Approximate analytical solution of two-dimensional multigroup P-3 equations

International Nuclear Information System (INIS)

Matausek, M.V.; Milosevic, M.

1981-01-01

Iterative solution of multigroup spherical harmonics equations reduces, in the P-3 approximation and in two-dimensional geometry, to a problem of solving an inhomogeneous system of eight ordinary first order differential equations. With appropriate boundary conditions, these equations have to be solved for each energy group and in each iteration step. The general solution of the corresponding homogeneous system of equations is known in analytical form. The present paper shows how the right-hand side of the system can be approximated in order to derive a particular solution and thus an approximate analytical expression for the general solution of the inhomogeneous system. This combined analytical-numerical approach was shown to have certain advantages compared to the finite-difference method or the Lie-series expansion method, which have been used to solve similar problems. (orig./RW) [de

The Curious Acoustic Behavior of Estuarine Snapping Shrimp: Temporal Patterns of Snapping Shrimp Sound in Sub-Tidal Oyster Reef Habitat.

Directory of Open Access Journals (Sweden)

DelWayne R Bohnenstiehl

Full Text Available Ocean soundscapes convey important sensory information to marine life. Like many mid-to-low latitude coastal areas worldwide, the high-frequency (>1.5 kHz soundscape of oyster reef habitat within the West Bay Marine Reserve (36°N, 76°W is dominated by the impulsive, short-duration signals generated by snapping shrimp. Between June 2011 and July 2012, a single hydrophone deployed within West Bay was programmed to record 60 or 30 seconds of acoustic data every 15 or 30 minutes. Envelope correlation and amplitude information were then used to count shrimp snaps within these recordings. The observed snap rates vary from 1500-2000 snaps per minute during summer to <100 snaps per minute during winter. Sound pressure levels are positively correlated with snap rate (r = 0.71-0.92 and vary seasonally by ~15 decibels in the 1.5-20 kHz range. Snap rates are positively correlated with water temperatures (r = 0.81-0.93, as well as potentially influenced by climate-driven changes in water quality. Light availability modulates snap rate on diurnal time scales, with most days exhibiting a significant preference for either nighttime or daytime snapping, and many showing additional crepuscular increases. During mid-summer, the number of snaps occurring at night is 5-10% more than predicted by a random model; however, this pattern is reversed between August and April, with an excess of up to 25% more snaps recorded during the day in the mid-winter. Diurnal variability in sound pressure levels is largest in the mid-winter, when the overall rate of snapping is at its lowest, and the percentage difference between daytime and nighttime activity is at its highest. This work highlights our lack of knowledge regarding the ecology and acoustic behavior of one of the most dominant soniforous invertebrate species in coastal systems. It also underscores the necessity of long-duration, high-temporal-resolution sampling in efforts to understand the bioacoustics of animal

MULTI - A multigroup or multipoint P{sub 3} programme for calculating thermal neutron spectra in a reactor cell

Energy Technology Data Exchange (ETDEWEB)

Matausek, M V [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1968-06-15

Programme MULTI calculates the space energy distribution of thermal neutrons in a multizone, cylindrical, infinitely long reactor lattice by using the multigroup or multipoint P{sub 3} approximation. This report presents a short description of the algorithm and the programme and gives the instructions for its exploitation. (author)

Dynamics of snapping beams and jumping poppers

Science.gov (United States)

Pandey, A.; Moulton, D. E.; Vella, D.; Holmes, D. P.

2014-01-01

We consider the dynamic snapping instability of elastic beams and shells. Using the Kirchhoff rod and Föppl-von Kármán plate equations, we study the stability, deformation modes, and snap-through dynamics of an elastic arch with clamped boundaries and subject to a concentrated load. For parameters typical of everyday and technological applications of snapping, we show that the stretchability of the arch plays a critical role in determining not only the post-buckling mode of deformation but also the timescale of snapping and the frequency of the arch's vibrations about its final equilibrium state. We show that the growth rate of the snap-through instability and its subsequent ringing frequency can both be interpreted physically as the result of a sound wave in the material propagating over a distance comparable to the length of the arch. Finally, we extend our analysis of the ringing frequency of indented arches to understand the “pop” heard when everted shell structures snap-through to their stable state. Remarkably, we find that not only are the scaling laws for the ringing frequencies in these two scenarios identical but also the respective prefactors are numerically close; this allows us to develop a master curve for the frequency of ringing in snapping beams and shells.

Multi-Group Covariance Data Generation from Continuous-Energy Monte Carlo Transport Calculations

International Nuclear Information System (INIS)

Lee, Dong Hyuk; Shim, Hyung Jin

2015-01-01

The sensitivity and uncertainty (S/U) methodology in deterministic tools has been utilized for quantifying uncertainties of nuclear design parameters induced by those of nuclear data. The S/U analyses which are based on multi-group cross sections can be conducted by an simple error propagation formula with the sensitivities of nuclear design parameters to multi-group cross sections and the covariance of multi-group cross section. The multi-group covariance data required for S/U analysis have been produced by nuclear data processing codes such as ERRORJ or PUFF from the covariance data in evaluated nuclear data files. However in the existing nuclear data processing codes, an asymptotic neutron flux energy spectrum, not the exact one, has been applied to the multi-group covariance generation since the flux spectrum is unknown before the neutron transport calculation. It can cause an inconsistency between the sensitivity profiles and the covariance data of multi-group cross section especially in resolved resonance energy region, because the sensitivities we usually use are resonance self-shielded while the multi-group cross sections produced from an asymptotic flux spectrum are infinitely-diluted. In order to calculate the multi-group covariance estimation in the ongoing MC simulation, mathematical derivations for converting the double integration equation into a single one by utilizing sampling method have been introduced along with the procedure of multi-group covariance tally

AMPX: a modular code system for generating coupled multigroup neutron-gamma libraries from ENDF/B

Energy Technology Data Exchange (ETDEWEB)

Greene, N.M.; Lucius, J.L.; Petrie, L.M.; Ford, W.E. III; White, J.E.; Wright, R.Q.

1976-03-01

AMPX is a modular system for producing coupled multigroup neutron-gamma cross section sets. Basic neutron and gamma cross-section data for AMPX are obtained from ENDF/B libraries. Most commonly used operations required to generate and collapse multigroup cross-section sets are provided in the system. AMPX is flexibly dimensioned; neutron group structures, and gamma group structures, and expansion orders to represent anisotropic processes are all arbitrary and limited only by available computer core and budget. The basic processes provided will (1) generate multigroup neutron cross sections; (2) generate multigroup gamma cross sections; (3) generate gamma yields for gamma-producing neutron interactions; (4) combine neutron cross sections, gamma cross sections, and gamma yields into final ''coupled sets''; (5) perform one-dimensional discrete ordinates transport or diffusion theory calculations for neutrons and gammas and, on option, collapse the cross sections to a broad-group structure, using the one-dimensional results as weighting functions; (6) plot cross sections, on option, to facilitate the ''evaluation'' of a particular multigroup set of data; (7) update and maintain multigroup cross section libraries in such a manner as to make it not only easy to combine new data with previously processed data but also to do it in a single pass on the computer; and (8) output multigroup cross sections in convenient formats for other codes. (auth)

Offensive Strategy in the 2D Soccer Simulation League Using Multi-Group Ant Colony Optimization

Directory of Open Access Journals (Sweden)

Shengbing Chen

2016-02-01

Full Text Available The 2D soccer simulation league is one of the best test beds for the research of artificial intelligence (AI. It has achieved great successes in the domain of multi-agent cooperation and machine learning. However, the problem of integral offensive strategy has not been solved because of the dynamic and unpredictable nature of the environment. In this paper, we present a novel offensive strategy based on multi-group ant colony optimization (MACO-OS. The strategy uses the pheromone evaporation mechanism to count the preference value of each attack action in different environments, and saves the values of success rate and preference in an attack information tree in the background. The decision module of the attacker then selects the best attack action according to the preference value. The MACO-OS approach has been successfully implemented in our 2D soccer simulation team in RoboCup competitions. The experimental results have indicated that the agents developed with this strategy, along with related techniques, delivered outstanding performances.

BETHSY 9.1b Test Calculation with TRACE Using 3D Vessel Component

International Nuclear Information System (INIS)

Berar, O.; Prosek, A.

2012-01-01

Recently, several advanced multidimensional computational tools for simulating reactor system behaviour during real and hypothetical transient scenarios were developed. One of such advanced, best-estimate reactor systems codes is TRAC/RELAP Advanced Computational Engine (TRACE), developed by the U.S. Nuclear Regulatory Commission. The advanced TRACE comes with a graphical user interface called SNAP (Symbolic Nuclear Analysis Package). It is intended for pre- and post-processing, running codes, RELAP5 to TRACE input deck conversion, input deck database generation etc. The TRACE code is still not fully development and it will have all the capabilities of RELAP5. The purpose of the present study was therefore to assess the 3D capability of the TRACE on BETHSY 9.1b test. The TRACE input deck was semi-converted (using SNAP and manual corrections) from the RELAP5 input deck. The 3D fluid dynamics within reactor vessel was modelled and compared to 1D fluid dynamics. The 3D calculation was compared both to TRACE 1D calculation and RELAP5 calculation. Namely, the geometry used in TRACE is basically the same, what gives very good basis for the comparison of the codes. The only exception is 3D reactor vessel model in case of TRACE 3D calculation. The TRACE V5.0 Patch 1 and RELAP5/MOD3.3 Patch 4 were used for calculations. The BETHSY 9.1b test (International Standard Problem no. 27 or ISP-27) was 5.08 cm equivalent diameter cold leg break without high pressure safety injection and with delayed ultimate procedure. BETHSY facility was a 3-loop replica of a 900 MWe FRAMATOME pressurized water reactor. For better presentation of the calculated physical phenomena and processes, an animation model using SNAP was developed. In general, the TRACE 3D code calculation is in good agreement with the BETHSY 9.1b test. The TRACE 3D calculation results are as good as or better than the RELAP5 calculated results. Also, the TRACE 3D calculation is not significantly different from TRACE 1D

Multigroup or multipoint thermal neutron data preparation. Programme SIGMA

International Nuclear Information System (INIS)

Matausek, M.V.; Kunc, M.

1974-01-01

When calculating the space energy distribution of thermal neutrons in reactor lattices, in either the multigroup or the multipoint approximation, it is convenient to divide the problem into two independent parts. Firstly, for all material regions of the given reactor lattice cell, the group or the point values of cross sections, scattering kernel and the outer source of thermal neutrons are calculated by a data preparation programme. These quantities are then used as input, by the programme which solves multigroup or multipoint transport equations, to generate the space energy neutron spectra in the cell considered and to determine the related integral quantities, namely the different reaction rates. The present report deals with the first part of the problem. An algorithm for constructing a set of thermal neutron input data, to be used with the multigroup or multipoint version of the code MULTI /1,2,3/, is presented and the new version of the programme SIGMA /4/, written in FORTRAN IV for the CDC-3600 computer, is described. For a given reactor cell material, composed of a number of different isotopes, this programme calculates the group or the point values of the scattering macroscopic absorption cross section, macroscopic scattering cross section, kernel and the outer source of thermal neutrons. Numerous options are foreseen in the programme, concerning the energy variation of cross sections and a scattering kernel, concerning the weighting spectrum in multigroup scheme or the procedure for constructing the scattering matrix in the multipoint scheme and, finally, concerning the organization of output. The details of the calculational algorithm are presented in Section 2 of the paper. Section 3 contains the description of the programme and the instructions for its use (author)

Multigroup Moderation Test in Generalized Structured Component Analysis

Directory of Open Access Journals (Sweden)

Angga Dwi Mulyanto

2016-05-01

Full Text Available Generalized Structured Component Analysis (GSCA is an alternative method in structural modeling using alternating least squares. GSCA can be used for the complex analysis including multigroup. GSCA can be run with a free software called GeSCA, but in GeSCA there is no multigroup moderation test to compare the effect between groups. In this research we propose to use the T test in PLS for testing moderation Multigroup on GSCA. T test only requires sample size, estimate path coefficient, and standard error of each group that are already available on the output of GeSCA and the formula is simple so the user does not need a long time for analysis.

CHARTB multigroup transport package

International Nuclear Information System (INIS)

Baker, L.

1979-03-01

The physics and numerical implementation of the radiation transport routine used in the CHARTB MHD code are discussed. It is a one-dimensional (Cartesian, cylindrical, and spherical symmetry), multigroup,, diffusion approximation. Tests and applications will be discussed as well

Quantitative mass spectrometry reveals changes in SNAP-25 isoforms in schizophrenia

Science.gov (United States)

Barakauskas, Vilte E; Moradian, Annie; Barr, Alasdair M.; Beasley, Clare L; Rosoklija, Gorazd; Mann, J John; Ilievski, Boro; Stankov, Aleksandar; Dwork, Andrew J; Falkai, Peter; Morin, Gregg B; Honer, William G

2016-01-01

SNAP-25 and syntaxin are presynaptic terminal SNARE proteins altered in amount and function in schizophrenia. In the ventral caudate, we observed 32% lower SNAP-25 and 26% lower syntaxin, but greater interaction between the two proteins using an in vitro assay. SNAP-25 has two isoforms, SNAP-25A and B, differing by only 9 amino acids, but with different effects on neurotransmission. A quantitative mass spectrometry assay was developed to measure total SNAP-25, and proportions of SNAP-25A and B. The assay had a good linear range (50- to 150-fold) and coefficient of variation (4.5%). We studied ventral caudate samples from patients with schizophrenia (n=15) previously reported to have lower total SNAP-25 than controls (n=13). We confirmed 27% lower total SNAP-25 in schizophrenia, and observed 31% lower SNAP-25A (P = 0.002) with 20% lower SNAP-25B amounts (P = 0.10). Lower SNAP-25A amount correlated with greater SNAP-25-syntaxin protein-protein interactions (r = -0.41, P = 0.03); the level of SNAP-25B did not. Administration of haloperidol or clozapine to rats did not mimic the changes found in schizophrenia. The findings suggest that lower levels of SNAP-25 in schizophrenia may represent a greater effect of the illness on the SNAP-25A isoform. This in turn could contribute to the greater interaction between SNAP25 and syntaxin, and possibly disturb neurotransmission in the illness. PMID:26971072

Composites of 3D-Printed Polymers and Textile Fabrics*

Science.gov (United States)

Martens, Yasmin; Ehrmann, Andrea

2017-08-01

3D printing belongs to the rapidly emerging technologies of our time. Due to its recent drawback - the technology is relatively slow compared with other primary shaping methods, such as injection molding -, 3D printing is often not used for creating complete large components but to add specific features to existing larger objects. One of the possibilities to create such composites with an additional value consists in combining 3D printed polymers with textile fabrics. Several attempts have been made to enhance the adhesion between both materials, a task which is still challenging for diverse material combinations. Our paper reports about new experiments combining 3D printed embossed designs, snap fasteners and zip fasteners with different textile base materials, showing the possibilities and technical limits of these novel composites.

Resolution of the multigroup scattering equation in a one-dimensional geometry and subsidiary calculations: the MUDE code; Resolution de l'equation multigroupe de la diffusion dans une geometrie a une dimension et calculs annexes: code MUDE

Energy Technology Data Exchange (ETDEWEB)

Bore, C; Dandeu, Y; Saint-Amand, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

MUDE is a nuclear code written in FORTRAN II for IBM 7090-7094. It resolves a system of difference equations approximating to the one-dimensional multigroup neutron scattering problem. More precisely, this code makes it possible to: 1. Calculate the critical condition of a reactor (k{sub eff}, critical radius, critical composition) and the corresponding fluxes; 2. Calculate the associated fluxes and various subsidiary results; 3. Carry out perturbation calculations; 4. Study the propagation of fluxes at a distance; 5. Estimate the relative contributions of the cross sections (macroscopic or microscopic); 6. Study the changes with time of the composition of the reactor. (authors) [French] MUDE est un code nucleaire ecrit en FORTRAN II pour IBM 7090-7094. Il resout un systeme d'equations aux differences approchant le probleme de diffusion neutronique multigroupe a une dimension. Plus precisement ce code permet de: 1. Calculer la condition critique d'un reacteur (k{sub eff}, rayon critique, composition critique) et les flux correspondants; 2. Calculer les flux adjoints et divers resultats connexes; 3. Effectuer des calculs de perturbation; 4. Etudier la propagation des flux a longue distance; 5. Ponderer des sections efficaces (macroscopiques ou microscopiques); 6. Etudier l'evolution de la composition du reacteur au cours du temps. (auteurs)

Development of LMR basic design technology - Development of 3-D multi-group nodal kinetics code for liquid metal reactors

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Hyun [Kyunghee University, Seoul (Korea, Republic of)

1996-07-01

A development project of 3-dimensional kinetics code for ALMR has three level of works. In the first level, a multi-group, nodal kinetics code for the HEX-Z geometry has been developed. A code showed very good results for the static analysis as well as for the kinetics problems. At the second level, a core thermal-hydraulic analysis code was developed for the temperature feedback calculation in ALMR transients analysis. This code is coupled with kinetics code. A sodium property table was programmed and tested to the KAERI data and thermal feedback model was developed and coupled in code. Benchmarking of T/H calculation has been performed and showed fairly good results. At the third level of research work, reactivity feedback model for structure thermal expansion is developed and added to the code. At present, basic model was studied. However, code development in now on going. Benchmarking of this model developed can not be done because of lack of data. 31 refs., 17 tabs., 38 figs. (author)

FOXC1 modulates MYOC secretion through regulation of the exocytic proteins RAB3GAP1, RAB3GAP2 and SNAP25.

Directory of Open Access Journals (Sweden)

Alexandra Rasnitsyn

Full Text Available The neurodegenerative disease glaucoma is one of the leading causes of blindness in the world. Glaucoma is characterized by progressive visual field loss caused by retinal ganglion cell (RGC death. Both surgical glaucoma treatments and medications are available, however, they only halt glaucoma progression and are unable to reverse damage. Furthermore, many patients do not respond well to treatments. It is therefore important to better understand the mechanisms involved in glaucoma pathogenesis. Patients with Axenfeld-Rieger syndrome (ARS offer important insight into glaucoma progression. ARS patients are at 50% risk of developing early onset glaucoma and respond poorly to treatments, even when surgical treatments are combined with medications. Mutations in the transcription factor FOXC1 cause ARS. Alterations in FOXC1 levels cause ocular malformations and disrupt stress response in ocular tissues, thereby contributing to glaucoma progression. In this study, using biochemical and molecular techniques, we show that FOXC1 regulates the expression of RAB3GAP1, RAB3GAP2 and SNAP25, three genes with central roles in both exocytosis and endocytosis, responsible for extracellular trafficking. FOXC1 positively regulates RAB3GAP1 and RAB3GAP2, while either increase or decrease in FOXC1 levels beyond its normal range results in decreased SNAP25. In addition, we found that FOXC1 regulation of RAB3GAP1, RAB3GAP2 and SNAP25 affects secretion of Myocilin (MYOC, a protein associated with juvenile onset glaucoma and steroid-induced glaucoma. The present work reveals that FOXC1 is an important regulator of exocytosis and establishes a new link between FOXC1 and MYOC-associated glaucoma.

Snap evaporation of droplets on smooth topographies.

Science.gov (United States)

Wells, Gary G; Ruiz-Gutiérrez, Élfego; Le Lirzin, Youen; Nourry, Anthony; Orme, Bethany V; Pradas, Marc; Ledesma-Aguilar, Rodrigo

2018-04-11

Droplet evaporation on solid surfaces is important in many applications including printing, micro-patterning and cooling. While seemingly simple, the configuration of evaporating droplets on solids is difficult to predict and control. This is because evaporation typically proceeds as a "stick-slip" sequence-a combination of pinning and de-pinning events dominated by static friction or "pinning", caused by microscopic surface roughness. Here we show how smooth, pinning-free, solid surfaces of non-planar topography promote a different process called snap evaporation. During snap evaporation a droplet follows a reproducible sequence of configurations, consisting of a quasi-static phase-change controlled by mass diffusion interrupted by out-of-equilibrium snaps. Snaps are triggered by bifurcations of the equilibrium droplet shape mediated by the underlying non-planar solid. Because the evolution of droplets during snap evaporation is controlled by a smooth topography, and not by surface roughness, our ideas can inspire programmable surfaces that manage liquids in heat- and mass-transfer applications.

Numerical analysis for multi-group neutron-diffusion equation using Radial Point Interpolation Method (RPIM)

International Nuclear Information System (INIS)

Kim, Kyung-O; Jeong, Hae Sun; Jo, Daeseong

2017-01-01

Highlights: • Employing the Radial Point Interpolation Method (RPIM) in numerical analysis of multi-group neutron-diffusion equation. • Establishing mathematical formation of modified multi-group neutron-diffusion equation by RPIM. • Performing the numerical analysis for 2D critical problem. - Abstract: A mesh-free method is introduced to overcome the drawbacks (e.g., mesh generation and connectivity definition between the meshes) of mesh-based (nodal) methods such as the finite-element method and finite-difference method. In particular, the Point Interpolation Method (PIM) using a radial basis function is employed in the numerical analysis for the multi-group neutron-diffusion equation. The benchmark calculations are performed for the 2D homogeneous and heterogeneous problems, and the Multiquadrics (MQ) and Gaussian (EXP) functions are employed to analyze the effect of the radial basis function on the numerical solution. Additionally, the effect of the dimensionless shape parameter in those functions on the calculation accuracy is evaluated. According to the results, the radial PIM (RPIM) can provide a highly accurate solution for the multiplication eigenvalue and the neutron flux distribution, and the numerical solution with the MQ radial basis function exhibits the stable accuracy with respect to the reference solutions compared with the other solution. The dimensionless shape parameter directly affects the calculation accuracy and computing time. Values between 1.87 and 3.0 for the benchmark problems considered in this study lead to the most accurate solution. The difference between the analytical and numerical results for the neutron flux is significantly increased in the edge of the problem geometry, even though the maximum difference is lower than 4%. This phenomenon seems to arise from the derivative boundary condition at (x,0) and (0,y) positions, and it may be necessary to introduce additional strategy (e.g., the method using fictitious points and

Range calculations using multigroup transport methods

International Nuclear Information System (INIS)

Hoffman, T.J.; Robinson, M.T.; Dodds, H.L. Jr.

1979-01-01

Several aspects of radiation damage effects in fusion reactor neutron and ion irradiation environments are amenable to treatment by transport theory methods. In this paper, multigroup transport techniques are developed for the calculation of particle range distributions. These techniques are illustrated by analysis of Au-196 atoms recoiling from (n,2n) reactions with gold. The results of these calculations agree very well with range calculations performed with the atomistic code MARLOWE. Although some detail of the atomistic model is lost in the multigroup transport calculations, the improved computational speed should prove useful in the solution of fusion material design problems

SNAP Satellite Focal Plane Development

International Nuclear Information System (INIS)

Bebek, C.; Akerlof, C.; Aldering, G.; Amanullah, R.; Astier, P.; Baltay, C.; Barrelet, E.; Basa, S.; Bercovitz, J.; Bergstrom, L.; Berstein, G.P.; Bester, M.; Bohlin, R.; Bonissent, A.; Bower, C.; Campbell, M.; Carithers, W.; Commins, E.; Day, C.; Deustua, S.; DiGennaro, R.; Ealet, A.; Ellis, R.; Emmett, W.; Eriksson, M.; Fouchez, D.; Fruchter, A.; Genat, J-F.; Goldhaber, G.; Goobar, A.; Groom, D.; Heetderks, H.; Holland, S.; Huterer, D.; Johnson, W.; Kadel, R.; Karcher, A.; Kim, A.; Kolbe, W.; Lafever, R.; Lamoureaux, J.; Lampton, M.; Lefevre, O.; Levi, M.; Levin, D.; Linder, E.; Loken, S.; Malina, R.; Mazure, A.; McKay, T.; McKee, S.; Miquel, R.; Morgan, N.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Roe, N.; Nugent, P.; Oluseyi, H.; Pain, R.; Palaio, N.; Pankow, D.; Perlmutter, S.; Prieto, E.; Rabinowitz, D.; Refregier, A.; Rhodes, J.; Schubnell, M.; Sholl, M.; Smadja, G.; Smith, R.; Smoot, G.; Snyder, J.; Spadafora, A.; Szymkowiak, A.; Tarle, G.; Taylor, K.; Tilquin, A.; Tomasch, A.; Vincent, D.; von der Lippe, H.; Walder, J-P.; Wang, G.

2003-01-01

The proposed SuperNova/Acceleration Probe (SNAP) mission will have a two-meter class telescope delivering diffraction-limited images to an instrumented 0.7 square degree field in the visible and near-infrared wavelength regime. The requirements for the instrument suite and the present configuration of the focal plane concept are presented. A two year R and D phase, largely supported by the Department of Energy, is just beginning. We describe the development activities that are taking place to advance our preparedness for mission proposal in the areas of detectors and electronics

Development and verification of a high performance multi-group SP3 transport capability in the ARTEMIS core simulator

International Nuclear Information System (INIS)

Van Geemert, Rene

2008-01-01

For satisfaction of future global customer needs, dedicated efforts are being coordinated internationally and pursued continuously at AREVA NP. The currently ongoing CONVERGENCE project is committed to the development of the ARCADIA R next generation core simulation software package. ARCADIA R will be put to global use by all AREVA NP business regions, for the entire spectrum of core design processes, licensing computations and safety studies. As part of the currently ongoing trend towards more sophisticated neutronics methodologies, an SP 3 nodal transport concept has been developed for ARTEMIS which is the steady-state and transient core simulation part of ARCADIA R . For enabling a high computational performance, the SP N calculations are accelerated by applying multi-level coarse mesh re-balancing. In the current implementation, SP 3 is about 1.4 times as expensive computationally as SP 1 (diffusion). The developed SP 3 solution concept is foreseen as the future computational workhorse for many-group 3D pin-by-pin full core computations by ARCADIA R . With the entire numerical workload being highly parallelizable through domain decomposition techniques, associated CPU-time requirements that adhere to the efficiency needs in the nuclear industry can be expected to become feasible in the near future. The accuracy enhancement obtainable by using SP 3 instead of SP 1 has been verified by a detailed comparison of ARTEMIS 16-group pin-by-pin SP N results with KAERI's DeCart reference results for the 2D pin-by-pin Purdue UO 2 /MOX benchmark. This article presents the accuracy enhancement verification and quantifies the achieved ARTEMIS-SP 3 computational performance for a number of 2D and 3D multi-group and multi-box (up to pin-by-pin) core computations. (authors)

Comparative kinematical analyses of Venus flytrap (Dionaea muscipula snap traps

Directory of Open Access Journals (Sweden)

Simon Poppinga

2016-05-01

Full Text Available Although the Venus flytrap (Dionaea muscipula can be considered as one of the most extensively investigated carnivorous plants, knowledge is still scarce about diversity of the snap-trap motion, the functionality of snap traps under varying environmental conditions, and their opening motion. By conducting simple snap-trap closure experiments in air and under water, we present striking evidence that adult Dionaea snaps similarly fast in aerial and submersed states and, hence, is potentially able to gain nutrients from fast aquatic prey during seasonal inundation. We reveal three snapping modes of adult traps, all incorporating snap buckling, and show that millimeter-sized, much slower seedling traps do not yet incorporate such elastic instabilities. Moreover, opening kinematics of young and adult Dionaea snap traps reveal that reverse snap buckling is not performed, corroborating the assumption that growth takes place on certain trap lobe regions. Our findings are discussed in an evolutionary, biomechanical, functional–morphological and biomimetic context.

Snapping Knee Caused by Medial Meniscal Cyst

Directory of Open Access Journals (Sweden)

Tsuyoshi Ohishi

2014-01-01

Full Text Available Snapping phenomenon around the medial aspect of the knee is rare. We present this case of snapping knee caused by the sartorius muscle over a large medial meniscal cyst in a 66-year-old female. Magnetic resonance images demonstrated a large medial meniscal cyst with a horizontal tear of the medial meniscus. Arthroscopic cyst decompression with limited meniscectomy resulted in the disappearance of snapping, and no recurrence of the cyst was observed during a 2-year follow-up period.

Review of multigroup nuclear cross-section processing

Energy Technology Data Exchange (ETDEWEB)

Trubey, D.K.; Hendrickson, H.R. (comps.)

1978-10-01

These proceedings consist of 18 papers given at a seminar--workshop on ''Multigroup Nuclear Cross-Section Processing'' held at Oak Ridge, Tennessee, March 14--16, 1978. The papers describe various computer code systems and computing algorithms for producing multigroup neutron and gamma-ray cross sections from evaluated data, and experience with several reference data libraries. Separate abstracts were prepared for 13 of the papers. The remaining five have already been cited in ERA, and may be located by referring to the entry CONF-780334-- in the Report Number Index. (RWR)

Development of multi-group xs libraries for the gfr 2400 reactor

International Nuclear Information System (INIS)

Cerba, Š.; Vrban, B.; Lüley, J.; Necas, V.

2016-01-01

GFR 2400 is considered as a conceptual design of the large scale GEN IV Gas-Cooled Fast Reactor. In general, the GEN IV technologies are seen as reliable but also very challenging reactor concepts. Since GFR 2400 lacks any experimental data, the questions on its safety are even more complex and the assessment of its performance could be made only based on computational experience. The paper deals with the development process of multi-group XS libraries based on a hybrid deterministic-Stochastic methodology, using the NJOY99, TRANSX, DIF3D, PARTISN and MCNP5 codes. A new optimized 25 group SBJ E 71 2 5G cross section library was developed based on ENDF/B-VII.1 evaluated data, ZZ-KAFAX-E70 background cross sections and GFR 2400 neutron spectrum. The created library was validated through integral experiments evaluated on the HEX-Z deterministic models in DIF3D. The results were also compared with MCNP5 calculations. (authors)

Development of an Analytic Nodal Diffusion Solver in Multi-groups for 3D Reactor Cores with Rectangular or Hexagonal Assemblies

Energy Technology Data Exchange (ETDEWEB)

Lozano, Juan Andres; Aragones, Jose Maria; Garcia-Herranz, Nuria [Universidad Politecnica de Madrid, 28006 Jose Gutierrez Abascal 2, Madrid (Spain)

2008-07-01

More accurate modelling of physical phenomena involved in present and future nuclear reactors requires a multi-scale and multi-physics approach. This challenge can be accomplished by the coupling of best-estimate core-physics, thermal-hydraulics and multi-physics solvers. In order to make viable that coupling, the current trends in reactor simulations are along the development of a new generation of tools based on user-friendly, modular, easily linkable, faster and more accurate codes to be integrated in common platforms. These premises are in the origin of the NURESIM Integrated Project within the 6. European Framework Program, which is envisaged to provide the initial step towards a Common European Standard Software Platform for nuclear reactors simulations. In the frame of this project and to reach the above-mentioned goals, a 3-D multigroup nodal solver for neutron diffusion calculations called ANDES (Analytic Nodal Diffusion Equation Solver) has been developed and tested in-depth in this Thesis. ANDES solves the steady-state and time-dependent neutron diffusion equation in three-dimensions and any number of energy groups, utilizing the Analytic Coarse-Mesh Finite-Difference (ACMFD) scheme to yield the nodal coupling equations. It can be applied to both Cartesian and triangular-Z geometries, so that simulations of LWR as well as VVER, HTR and fast reactors can be performed. The solver has been implemented in a fully encapsulated way, enabling it as a module to be readily integrated in other codes and platforms. In fact, it can be used either as a stand-alone nodal code or as a solver to accelerate the convergence of whole core pin-by-pin code systems. Verification of performance has shown that ANDES is a code with high order definition for whole core realistic nodal simulations. In this paper, the methodology developed and involved in ANDES is presented. (authors)

NDS multigroup cross section libraries

International Nuclear Information System (INIS)

DayDay, N.

1981-12-01

A summary description and documentation of the multigroup cross section libraries which exist at the IAEA Nuclear Data Section are given in this report. The libraries listed are available either on tape or in printed form. (author)

SNAP/SOS: a package for simulating and analyzing safeguards systems

International Nuclear Information System (INIS)

Grant, F.H. III; Polito, J.; Sabuda, J.

1983-01-01

The effective analysis of safeguards systems at nuclear facilities requires significant effort. The Safeguards Network Analysis Procedure (SNAP) and the SNAP Operating System (SOS) reduce that effort to a manageable level. SNAP provides a detailed analysis of site safeguards for tactical evaluation. SOS helps the analyst organize and manage the SNAP effort effectively. SOS provides a database for model storage, automatic model generation, and computer graphics. The SOS/SNAP combination is a working example of a simulation system including executive-level control, database system, and facilities for model creation, editing, and output analysis

Effects of Thiamethoxam-Treated Seed on Mexican Bean Beetle (Coleoptera: Coccinellidae), Nontarget Arthropods, and Crop Performance in Southwestern Virginia Snap Beans.

Science.gov (United States)

Nottingham, L; Kuhar, T P; Kring, T; Herbert, D A; Arancibia, R; Schultz, P

2017-12-08

Thiamethoxam is a neonicotinoid insecticide commonly applied directly to the seeds (seed-treatment) of commercial snap beans, Phaseolus vulgaris L. While previous studies have examined target and nontarget effects of thiamethoxam seed-treatments in snap beans and other crops, to our knowledge, none have been conducted in agroecosystems predominated by the pest Mexican bean beetle, Epilachna varivestis Mulsant (Coleoptera: Coccinellidae). This study examined the effects of thiamethoxam-treated snap beans on E. varivestis, other arthropods, and crop performance in southwestern Virginia. Greenhouse experiments were conducted to evaluate residual toxicity of treated snap beans to E. varivestis and a key predator, Podisus maculiventris (Say) (Hemiptera: Pentatomidae). Treated plants were highly toxic to E. varivestis at 13 d, moderately toxic from 16 to 20 d, and minimally toxic at 24 d. P. maculiventris was unaffected by exposure to treated plants or by feeding on E. varivestis that consumed treated plants. Small plot field experiments in 2014 and 2015 showed no significant effects of thiamethoxam seed-treatments on E. varivestis densities, other arthropods, crop injury, or yield. In 2016, planting was delayed by persistent rain, resulting in early E. varivestis colonization. In this year, thiamethoxam-treated plants had significantly lower densities and feeding injury from E. varivestis, followed by significantly higher yields. Natural enemies were unaffected by seed-treatments in all field experiments. These experiments demonstrated that thiamethoxam seed-treatments provide control of E. varivestis when beetles infest fields within 2 to 3 wk after planting; but otherwise provide negligible advantages. Negative effects from thiamethoxam seed-treatments on nontarget arthropods appear minimal for snap beans in this region. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please

SYN3D: a single-channel, spatial flux synthesis code for diffusion theory calculations

Energy Technology Data Exchange (ETDEWEB)

Adams, C. H.

1976-07-01

This report is a user's manual for SYN3D, a computer code which uses single-channel, spatial flux synthesis to calculate approximate solutions to two- and three-dimensional, finite-difference, multigroup neutron diffusion theory equations. SYN3D is designed to run in conjunction with any one of several one- and two-dimensional, finite-difference codes (required to generate the synthesis expansion functions) currently being used in the fast reactor community. The report describes the theory and equations, the use of the code, and the implementation on the IBM 370/195 and CDC 7600 of the version of SYN3D available through the Argonne Code Center.

SYN3D: a single-channel, spatial flux synthesis code for diffusion theory calculations

International Nuclear Information System (INIS)

Adams, C.H.

1976-07-01

This report is a user's manual for SYN3D, a computer code which uses single-channel, spatial flux synthesis to calculate approximate solutions to two- and three-dimensional, finite-difference, multigroup neutron diffusion theory equations. SYN3D is designed to run in conjunction with any one of several one- and two-dimensional, finite-difference codes (required to generate the synthesis expansion functions) currently being used in the fast reactor community. The report describes the theory and equations, the use of the code, and the implementation on the IBM 370/195 and CDC 7600 of the version of SYN3D available through the Argonne Code Center

APPLE, Plot of 1-D Multigroup Neutron Flux and Gamma Flux and Reaction Rates from ANISN

International Nuclear Information System (INIS)

Kawasaki, Hiromitsu; Seki, Yasushi

1983-01-01

A - Description of problem or function: The APPLE-2 code has the following functions: (1) It plots multi-group energy spectra of neutron and/or gamma ray fluxes calculated by ANISN, DOT-3.5, and MORSE. (2) It gives an overview plot of multi-group neutron fluxes calculated by ANISN and DOT-3.5. The scalar neutron flux phi(r,E) is plotted with the spatial parameter r linear along the Y-axis, logE along the X-axis and log phi(r,E) in the Z direction. (3) It calculates the spatial distribution and region volume integrated values of reaction rates using the scalar flux calculated with ANISN and DOT-3.5. (4) Reaction rate distribution along the R or Z direction may be plotted. (5) An overview plot of reaction rates or scalar fluxes summed over specified groups may be plotted. R(ri,zi) or phi(ri,zi) is plotted with spatial parameters r and z along the X- and Y-axes in an orthogonal coordinate system. (6) Angular flux calculated by ANISN is rearranged and a shell source at any specified spatial mesh point may be punched out in FIDO format. The shell source obtained may be employed in solving deep penetration problems with ANISN, when the entire reactor system is divided into two or more parts and the neutron fluxes in two adjoining parts are connected by using the shell source. B - Method of solution: (a) The input data specification is made as simple as possible by making use of the input data required in the radiation transport code. For example, geometry related data in ANISN and DOT are transmitted to APPLE-2 along with scalar flux data so as to reduce duplicity and errors in reproducing these data. (b) Most the input data follow the free form FIDO format developed at Oak Ridge National Laboratory and used in the ANISN code. Furthermore, the mixture specifying method used in ANISN is also employed by APPLE-2. (c) Libraries for some standard response functions required in fusion reactor design have been prepared and are made available to users of the 42-group neutron

Recent Developments in the Recovery of SNAP-DYN Technical Data Base

Science.gov (United States)

Determan, William R.; Grimmett, David

2007-01-01

SNAP-DYN was a concept for a multi-kilowatt class (i.e., 10 to 50 kWe) of space nuclear electric power systems based on the SNAP reactor, shield, and liquid metal heat transfer technologies developed in the 1960s and coupled with dynamic power conversion hardware and state of the art space radiator technologies. The basic concept minimized the system's development costs by utilizing established technologies for each of the major components within the power system to reduce its overall development schedule. Three power conversion technologies were evaluated for the SNAP-DYN concept including Organic Rankine Cycle (ORC) with a peak cycle temperature of 672 K, a closed Brayton cycle (CBC) with a peak cycle temperature of 906 K, and a free piston Stirling cycle (FPSC) with a peak cycle temperature of 870 K. Net system conversion efficiencies were estimated to range from 16 to 19 % over the 10 to 50 kWe power range. Specific power levels for these systems were estimated to range from 6.4 to 13 W/kg over the same power range. SNAP-DYN reactor thermal power levels varied from 55 to 260 kWt, but a much longer lifetime (5 to 10 years vs. 1.3 years) was being evaluated for this power system application than had been demonstrated in the 1960s SNAP reactor development program. The last SNAP reactor under development at the end of the program in 1973 was designed for a 5-year mission life at a nominal thermal power level of 110 kWt with a coolant outlet temperature capability of 922 K. This reactor technology formed the basis for the SNAP-DYN reactor concept.

Depletion Calculations for MTR Core Using MCNPX and Multi-Group Nodal Diffusion Methods

International Nuclear Information System (INIS)

Jaradata, Mustafa K.; Park, Chang Je; Lee, Byungchul

2013-01-01

In order to maintain a self-sustaining steady-state chain reaction, more fuel than is necessary in order to maintain a steady state chain reaction must be loaded. The introduction of this excess fuel increases the net multiplication capability of the system. In this paper MCNPX and multi-group nodal diffusion theory will be used for depletion calculations for MTR core. The eigenvalue and power distribution in the core will be compared for different burnup. Multi-group nodal diffusion theory with combination of NEWT-TRITON system was used to perform depletion calculations for 3Χ3 MTR core. 2G and 6G approximations were used and compared with MCNPX results for 2G approximation the maximum difference from MCNPX was 40 mk and for 6G approximation was 6 mk which is comparable to the MCNPX results. The calculated power using nodal code was almost the same MCNPX results. Finally the results of the multi-group nodal theory were acceptable and comparable to the calculated using MCNPX

Defining SNAP by cross-sectional and longitudinal definitions of neurodegeneration.

Science.gov (United States)

Wisse, L E M; Das, S R; Davatzikos, C; Dickerson, B C; Xie, S X; Yushkevich, P A; Wolk, D A

2018-01-01

Suspected non-Alzheimer's pathophysiology (SNAP) is a biomarker driven designation that represents a heterogeneous group in terms of etiology and prognosis. SNAP has only been identified by cross-sectional neurodegeneration measures, whereas longitudinal measures might better reflect "active" neurodegeneration and might be more tightly linked to prognosis. We compare neurodegeneration defined by cross-sectional 'hippocampal volume' only (SNAP/L-) versus both cross-sectional and longitudinal 'hippocampal atrophy rate' (SNAP/L+) and investigate how these definitions impact prevalence and the clinical and biomarker profile of SNAP in Mild Cognitive Impairment (MCI). 276 MCI patients from ADNI-GO/2 were designated amyloid "positive" (A+) or "negative" (A-) based on their florbetapir scan and neurodegeneration 'positive' or 'negative' based on cross-sectional hippocampal volume and longitudinal hippocampal atrophy rate. 74.1% of all SNAP participants defined by the cross-sectional definition of neurodegeneration also met the longitudinal definition of neurodegeneration, whereas 25.9% did not. SNAP/L+ displayed larger white matter hyperintensity volume, a higher conversion rate to dementia over 5 years and a steeper decline on cognitive tasks compared to SNAP/L- and the A- CN group. SNAP/L- had more abnormal values on neuroimaging markers and worse performance on cognitive tasks than the A- CN group, but did not show a difference in dementia conversion rate or longitudinal cognition. Using a longitudinal definition of neurodegeneration in addition to a cross-sectional one identifies SNAP participants with significant cognitive decline and a worse clinical prognosis for which cerebrovascular disease may be an important driver.

Spectrum of the multigroup neutron transport operator for bounded spatial domains

International Nuclear Information System (INIS)

Larsen, E.W.

1979-01-01

The spectrum of the multigroup neutron transport operator A is studied for bounded spatial regions D which consist of a finite number of material subregions. Our main results provide simple conditions on the material cross sections which guarantee that (1) A possesses eigenvalues in the finite plane; (2) A possesses a ''leading'' eigenvalue lambda 0 which is real, not less than the real part of any other eigenvalue, and to which there corresponds at least one nonnegative eigenfunction psi/sub lambda/0; and (3) A possesses a ''dominant'' eigenvalue lambda 0 which is real, simple, greater than the real part of any other eigenvalue, and whose eigenfunction psi/sub lambda/0 satisfies psi/sub lambda/0> or =0 and ∫psi/sub lambda/0d 2 Ω>0. We give examples to illustrate the results and to show that a leading eigenvalue need not be simple, nor its eigenfunction(s) positive

Angular finite volume method for solving the multigroup transport equation with piecewise average scattering cross sections

International Nuclear Information System (INIS)

Calloo, A.; Vidal, J.F.; Le Tellier, R.; Rimpault, G.

2011-01-01

This paper deals with the solving of the multigroup integro-differential form of the transport equation for fine energy group structure. In that case, multigroup transfer cross sections display strongly peaked shape for light scatterers and the current Legendre polynomial expansion is not well-suited to represent them. Furthermore, even if considering an exact scattering cross sections representation, the scattering source in the discrete ordinates method (also known as the Sn method) being calculated by sampling the angular flux at given directions, may be wrongly computed due to lack of angular support for the angular flux. Hence, following the work of Gerts and Matthews, an angular finite volume solver has been developed for 2D Cartesian geometries. It integrates the multigroup transport equation over discrete volume elements obtained by meshing the unit sphere with a product grid over the polar and azimuthal coordinates and by considering the integrated flux per solid angle element. The convergence of this method has been compared to the S_n method for a highly anisotropic benchmark. Besides, piecewise-average scattering cross sections have been produced for non-bound Hydrogen atoms using a free gas model for thermal neutrons. LWR lattice calculations comparing Legendre representations of the Hydrogen scattering multigroup cross section at various orders and piecewise-average cross sections for this same atom are carried out (while keeping a Legendre representation for all other isotopes). (author)

Contribution to the development of methods for nuclear reactor core calculations with APOLLO3 code: domain decomposition in transport theory with nonlinear diffusion acceleration for 2D and 3D geometries

International Nuclear Information System (INIS)

Lenain, Roland

2015-01-01

This thesis is devoted to the implementation of a domain decomposition method applied to the neutron transport equation. The objective of this work is to access high-fidelity deterministic solutions to properly handle heterogeneities located in nuclear reactor cores, for problems' size ranging from color-sets of assemblies to large reactor cores configurations in 2D and 3D. The innovative algorithm developed during the thesis intends to optimize the use of parallelism and memory. The approach also aims to minimize the influence of the parallel implementation on the performances. These goals match the needs of APOLLO3 project, developed at CEA and supported by EDF and AREVA, which must be a portable code (no optimization on a specific architecture) in order to achieve best estimate modeling with resources ranging from personal computer to compute cluster available for engineers analyses. The proposed algorithm is a Parallel Multigroup-Block Jacobi one. Each sub-domain is considered as a multi-group fixed-source problem with volume-sources (fission) and surface-sources (interface flux between the sub-domains). The multi-group problem is solved in each sub-domain and a single communication of the interface flux is required at each power iteration. The spectral radius of the resolution algorithm is made similar to the one of a classical resolution algorithm with a nonlinear diffusion acceleration method: the well-known Coarse Mesh Finite Difference. In this way an ideal scalability is achievable when the calculation is parallelized. The memory organization, taking advantage of shared memory parallelism, optimizes the resources by avoiding redundant copies of the data shared between the sub-domains. Distributed memory architectures are made available by a hybrid parallel method that combines both paradigms of shared memory parallelism and distributed memory parallelism. For large problems, these architectures provide a greater number of processors and the amount of

MUXS: a code to generate multigroup cross sections for sputtering calculations

International Nuclear Information System (INIS)

Hoffman, T.J.; Robinson, M.T.; Dodds, H.L. Jr.

1982-10-01

This report documents MUXS, a computer code to generate multigroup cross sections for charged particle transport problems. Cross sections generated by MUXS can be used in many multigroup transport codes, with minor modifications to these codes, to calculate sputtering yields, reflection coefficients, penetration distances, etc

Wide-field surveys from the SNAP mission

International Nuclear Information System (INIS)

2002-01-01

The Supernova/Acceleration Probe (SNAP) is a proposed space-borne observatory that will survey the sky with a wide-field optical/NIR imager. The images produced by SNAP will have an unprecedented combination of depth, solid-angle, angular resolution, and temporal sampling. Two 7.5 square-degree fields will be observed every four days over 16 months to a magnitude depth of AB = 27.7 in each of nine filters. Co-adding images over all epochs will give an AB = 30.3 per filter. A 300 square-degree field will be surveyed with no repeat visits to AB = 28 per filter. The nine filters span 3500-17000 (angstrom). Although the survey strategy is tailored for supernova and weak gravitational lensing observations, the resulting data supports a broad range of auxiliary science programs

Multigroup cross section library; WIMS library

International Nuclear Information System (INIS)

Kannan, Umasankari

2000-01-01

The WIMS library has been extensively used in thermal reactor calculations. This multigroup constants library was originally developed from the UKNDL in the late 60's and has been updated in 1986. This library has been distributed with the WIMS-D code by NEA data bank. The references to WIMS library in literature are the 'old' which is the original as developed by the AEA Winfrith and the 'new' which is the current 1986 WIMS library. IAEA has organised a CRP where a new and fully updated WIMS library will soon be available. This paper gives an overview of the definitions of the group constants that go into any basic nuclear data library used for reactor calculations. This paper also outlines the contents of the WIMS library and some of its shortcomings

Extending the accuracy of the SNAP interatomic potential form

Science.gov (United States)

Wood, Mitchell A.; Thompson, Aidan P.

2018-06-01

The Spectral Neighbor Analysis Potential (SNAP) is a classical interatomic potential that expresses the energy of each atom as a linear function of selected bispectrum components of the neighbor atoms. An extension of the SNAP form is proposed that includes quadratic terms in the bispectrum components. The extension is shown to provide a large increase in accuracy relative to the linear form, while incurring only a modest increase in computational cost. The mathematical structure of the quadratic SNAP form is similar to the embedded atom method (EAM), with the SNAP bispectrum components serving as counterparts to the two-body density functions in EAM. The effectiveness of the new form is demonstrated using an extensive set of training data for tantalum structures. Similar to artificial neural network potentials, the quadratic SNAP form requires substantially more training data in order to prevent overfitting. The quality of this new potential form is measured through a robust cross-validation analysis.

THEMIS-4: a coherent punctual and multigroup cross section library for Monte Carlo and SN codes from ENDF/B4

International Nuclear Information System (INIS)

Dejonghe, G.; Gonnord, J.; Monnier, A.; Nimal, J.C.

1983-05-01

The THEMIS cross section processing system has been developped to produce punctual data for MONTE CARLO and coherent multigroup data for SN codes from ENDF/B. The THEMIS-4 data base has been generated from ENDF/B4 using the system and can be accessed by the 3-D Monte Carlo system TRIPOLI-2 and by the SN codes ANISN and DOT. An interpretation of ORNL fusion shielding benchmark is presented

An assessment of finite element synthesis model using 3D FEM

International Nuclear Information System (INIS)

Jagannathan, V.; Rastogi, B.P

1983-01-01

For the solution of multigroup diffusion theory equations a code system called FEMSYN has been developed. The code FEMSYN incorporates a finite difference (FD) module, a finite element (FE) module and one module based on single channel flux synthesis (SCFS) method, which uses trial functions generated by either FD or FE method. The 3D problems can be tackled by all the three modules. The 3D FE solutions are cheaper in comparison with fine mesh FD computations and are quite accurate. The accuracy is improved by proper choice of rectangular and triangular right prismatic elements and polynomial order in case of 3D FE analyses. Synthesis method using FE trial functions provides the fastest means of solution for 3D problems. In this paper, the FE synthesis method has been compared with 3D FE technique for the case of IAEA PWR benchmark problem. It is concluded from the above comparison that FE synthesis method can give at negligible computational efforts, accurate eigenvalue estimates and satisfactory prediction of reactor core power profiles

Kalpakkam multigroup cross section set for fast reactor applications - status and performance

International Nuclear Information System (INIS)

Ramanadhan, M.M.; Gopalakrishnan, M.M.

1986-01-01

This report documents the status of the presently created set of multigroup constants at Kalpakkam. The list of nuclides processed and the details of multigroup structure are given. Also included are the particulars of dilutions and temperatures for each nuclide in the multigroup cross section set for which self shielding factors have been calculated. Using this new multigroup cross section set, measured integral quantities such as K-eff, central reaction rate ratios, central reactivity worths etc. were calculated for a few fast critical benchmark assemblies and the calculated values of neutronic parameters obtained were compared with those obtained using the available Cadarache cross section library and those published in literature for ENDF/B-IV based set and Japanese evaluated nuclear data library (JENDL). The details of analyses are documented along with the conclusions. (author). 17 refs., 12 tabs

Multigroup calculations of low-energy neutral transport in tokamak plasmas

International Nuclear Information System (INIS)

Gilligan, J.G.; Gralnick, S.L.; Price, W.G. Jr.; Kammash, T.

1978-01-01

Multigroup discrete ordinates methods avoid many of the approximations that have been used in previous neutral transport analyses. Of particular interest are the neutral profiles generated as an integral part of larger plasma system simulation codes. To determine the appropriateness of utilizing a particular multigroup code, ANISN, for this purpose, results are compared with the neutral transport module of the Duechs code. For a typical TFTR plasma, predicted neutral densities differ by a maximum factor of three on axis and outfluxes at the plasma boundary by approximately 40%. This is found to be significant for a neutral transport module. Possible sources of the observed discrepancies are indicated from an analysis of the approximations used in the Duechs model. Recommendations are made concerning the future application of the multigroup method. (author)

The Suppression of Energy Discretization Errors in Multigroup Transport Calculations

International Nuclear Information System (INIS)

Larsen, Edward

2013-01-01

The Objective of this project is to develop, implement, and test new deterministric methods to solve, as efficiently as possible, multigroup neutron transport problems having an extremely large number of groups. Our approach was to (i) use the standard CMFD method to 'coarsen' the space-angle grid, yielding a multigroup diffusion equation, and (ii) use a new multigrid-in-space-and-energy technique to efficiently solve the multigroup diffusion problem. The overall strategy of (i) how to coarsen the spatial an energy grids, and (ii) how to navigate through the various grids, has the goal of minimizing the overall computational effort. This approach yields not only the fine-grid solution, but also coarse-group flux-weighted cross sections that can be used for other related problems.

Snap-Through Buckling Problem of Spherical Shell Structure

Directory of Open Access Journals (Sweden)

Sumirin Sumirin

2014-12-01

Full Text Available This paper presents results of a numerical study on the nonlinear behavior of shells undergoing snap-through instability. This research investigates the problem of snap-through buckling of spherical shells applying nonlinear finite element analysis utilizing ANSYS Program. The shell structure was modeled by axisymmetric thin shell of finite elements. Shells undergoing snap-through buckling meet with significant geometric change of their physical configuration, i.e. enduring large deflections during their deformation process. Therefore snap-through buckling of shells basically is a nonlinear problem. Nonlinear numerical operations need to be applied in their analysis. The problem was solved by a scheme of incremental iterative procedures applying Newton-Raphson method in combination with the known line search as well as the arc- length methods. The effects of thickness and depth variation of the shell is taken care of by considering their geometrical parameter l. The results of this study reveal that spherical shell structures subjected to pressure loading experience snap-through instability for values of l≥2.15. A form of ‘turn-back’ of the load-displacement curve took place at load levels prior to the achievement of the critical point. This phenomenon was observed for values of l=5.0 to l=7.0.

Combined SAFE/SNAP approach to safeguards evaluation

International Nuclear Information System (INIS)

Engi, D.; Chapman, L.D.; Grant, F.H.; Polito, J.

1980-01-01

Generally, the scope of a safeguards evaluation model can efficiently address one of two issues, (1) global safeguards effectiveness, or (2) vulnerability analysis for individual scenarios. The Safeguards Automated Facility Evaluation (SAFE) focuses on (1) while the Safeguards Network Analysis Procedure (SNAP) is directed at (2). SAFE addresses (1) in that it considers the entire facility, i.e., the composite system of hardware and human components, in one global analysis. SNAP addresses (2) by providing a safeguards modeling symbology sufficiently flexible to represent quite complex scenarios from the standpoint of hardware interfaces while also accounting for a rich variety of human decision making. A combined SAFE/SNAP approach to the problem of safeguards evaluation is described and illustrated through an example

Angular finite volume method for solving the multigroup transport equation with piecewise average scattering cross sections

Energy Technology Data Exchange (ETDEWEB)

Calloo, A.; Vidal, J.F.; Le Tellier, R.; Rimpault, G., E-mail: ansar.calloo@cea.fr, E-mail: jean-francois.vidal@cea.fr, E-mail: romain.le-tellier@cea.fr, E-mail: gerald.rimpault@cea.fr [CEA, DEN, DER/SPRC/LEPh, Saint-Paul-lez-Durance (France)

2011-07-01

This paper deals with the solving of the multigroup integro-differential form of the transport equation for fine energy group structure. In that case, multigroup transfer cross sections display strongly peaked shape for light scatterers and the current Legendre polynomial expansion is not well-suited to represent them. Furthermore, even if considering an exact scattering cross sections representation, the scattering source in the discrete ordinates method (also known as the Sn method) being calculated by sampling the angular flux at given directions, may be wrongly computed due to lack of angular support for the angular flux. Hence, following the work of Gerts and Matthews, an angular finite volume solver has been developed for 2D Cartesian geometries. It integrates the multigroup transport equation over discrete volume elements obtained by meshing the unit sphere with a product grid over the polar and azimuthal coordinates and by considering the integrated flux per solid angle element. The convergence of this method has been compared to the S{sub n} method for a highly anisotropic benchmark. Besides, piecewise-average scattering cross sections have been produced for non-bound Hydrogen atoms using a free gas model for thermal neutrons. LWR lattice calculations comparing Legendre representations of the Hydrogen scattering multigroup cross section at various orders and piecewise-average cross sections for this same atom are carried out (while keeping a Legendre representation for all other isotopes). (author)

In vivo evaluation of radiotracers targeting the melanin-concentrating hormone receptor 1: [11C]SNAP-7941 and [18F]FE@SNAP reveal specific uptake in the ventricular system.

Science.gov (United States)

Zeilinger, Markus; Dumanic, Monika; Pichler, Florian; Budinsky, Lubos; Wadsak, Wolfgang; Pallitsch, Katharina; Spreitzer, Helmut; Lanzenberger, Rupert; Hacker, Marcus; Mitterhauser, Markus; Philippe, Cécile

2017-08-14

The MCHR1 is involved in the regulation of energy homeostasis and changes of the expression are linked to a variety of associated diseases, such as diabetes and adiposity. The study aimed at the in vitro and in vivo evaluation of [ 11 C]SNAP-7941 and [ 18 F]FE@SNAP as potential PET-tracers for the MCHR1. Competitive binding studies with non-radioactive derivatives and small-animal PET/CT and MRI brain studies were performed under baseline conditions and tracer displacement with the unlabelled MCHR1 antagonist (±)-SNAP-7941. Binding studies evinced high binding affinity of the non-radioactive derivatives. Small-animal imaging of [ 11 C]SNAP-7941 and [ 18 F]FE@SNAP evinced high tracer uptake in MCHR1-rich regions of the ventricular system. Quantitative analysis depicted a significant tracer reduction after displacement with (±)-SNAP-7941. Due to the high binding affinity of the non-labelled derivatives and the high specific tracer uptake of [ 11 C]SNAP-7941 and [ 18 F]FE@SNAP, there is strong evidence that both radiotracers may serve as highly suitable agents for specific MCHR1 imaging.

External Snapping Hip Syndrome: Emphasis on the MR Imaging

International Nuclear Information System (INIS)

Choi, Jung Eun; Lee, Bae Young; Sung, Mi Sook; Lee, Ki Haeng; Yoo, Won Jong; Lim, Hyun Wook; Chung, Myung Hee; Park, Jeong Mi; Kim, Jee Young

2010-01-01

The aim of this study is to evaluate the MR imaging features of patients with external snapping hip syndrome. We retrospectively reviewed 63 hip MR images. The images were analyzed according to the thickness and contour of the iliotibial band and the gluteus maximus, the presence of bone marrow edema, bursitis, joint effusion and other associated findings. The MR imaging of 22 hips with snapping hip syndrome depicted the causes of external snapping hip syndrome in twenty cases (90%). The MR imaging features of the snapping hip included thickening of the iliotibial band in twelve cases (55%) and/or thickening of the anterior band of the gluteus maximus in nineteen (86%), and a wavy contour of the iliotibial band or the anterior band of the gluteus maximus in ten cases (45%). These findings show a significant p value (<0.01). The majority of patients with snapping hip syndrome revealed thickening of the iliotibial band, thickening of the anterior band of the gluteus maximus and wavy contour of the those structures on MR imaging

External Snapping Hip Syndrome: Emphasis on the MR Imaging

Energy Technology Data Exchange (ETDEWEB)

Choi, Jung Eun; Lee, Bae Young [Catholic University St. Paul' s Hospital, Seoul (Korea, Republic of); Sung, Mi Sook; Lee, Ki Haeng; Yoo, Won Jong; Lim, Hyun Wook; Chung, Myung Hee [Catholic University Bucheon St. Mary' s Hospital, Bucheon (Korea, Republic of); Park, Jeong Mi [Catholic University St. Mary' s Hospital, Seoul (Korea, Republic of); Kim, Jee Young [Catholic University St. Vincent' s Hospital, Suwon (Korea, Republic of)

2010-02-15

The aim of this study is to evaluate the MR imaging features of patients with external snapping hip syndrome. We retrospectively reviewed 63 hip MR images. The images were analyzed according to the thickness and contour of the iliotibial band and the gluteus maximus, the presence of bone marrow edema, bursitis, joint effusion and other associated findings. The MR imaging of 22 hips with snapping hip syndrome depicted the causes of external snapping hip syndrome in twenty cases (90%). The MR imaging features of the snapping hip included thickening of the iliotibial band in twelve cases (55%) and/or thickening of the anterior band of the gluteus maximus in nineteen (86%), and a wavy contour of the iliotibial band or the anterior band of the gluteus maximus in ten cases (45%). These findings show a significant p value (<0.01). The majority of patients with snapping hip syndrome revealed thickening of the iliotibial band, thickening of the anterior band of the gluteus maximus and wavy contour of the those structures on MR imaging.

Snapping wrist due to multiple accessory tendon of first extensor compartment

Directory of Open Access Journals (Sweden)

S. Dhiyaneswaran Subramaniyam

2018-01-01

Conclusion: There are various causes for snapping wrist syndrome. Multiple accessory tendon can also cause snapping as shown in this case report. Moreover am presenting this case to highlight the diagnostic failure with non dynamic radiological investigation and to consider multiple accessory tendon as differential diagnosis for snapping wrist syndrome. Also suggest dynamic study could be a better choice of investigation to diagnosis snapping syndrome. First compartment tunnel release with few accessory tendon slip tenotomy gives good result.

A document review to characterize Atomic International SNAP fuels shipped to INEL 1966--1973

International Nuclear Information System (INIS)

Wahnschaffe, S.D.; Lords, R.E.; Kneff, D.W.; Nagel, W.E.; Pearlman, H.; Schaubert, V.J.

1995-09-01

This report provides the results of a document search and review study to obtain information on the spent fuels for the following six Nuclear Auxiliary Power (SNAP) reactor cores now stored at the Idaho National Engineering Laboratory (INEL): SNAP-2 Experimental Reactor, SNAP-2 Development Reactor, SNAP-10A Ground Test Reactor, SNAP-8 Experimental Reactor, SNAP-8 Development Reactor, and Shield Test Reactor. The report also covers documentation on SNAP fuel materials from four in-pile materials tests: NAA-82-1, NAA-115-2, NAA-117-1, and NAA-121. Pieces of these fuel materials are also stored at INEL as part of the SNAP fuel shipments

Second order time evolution of the multigroup diffusion and P1 equations for radiation transport

International Nuclear Information System (INIS)

Olson, Gordon L.

2011-01-01

Highlights: → An existing multigroup transport algorithm is extended to be second-order in time. → A new algorithm is presented that does not require a grey acceleration solution. → The two algorithms are tested with 2D, multi-material problems. → The two algorithms have comparable computational requirements. - Abstract: An existing solution method for solving the multigroup radiation equations, linear multifrequency-grey acceleration, is here extended to be second order in time. This method works for simple diffusion and for flux-limited diffusion, with or without material conduction. A new method is developed that does not require the solution of an averaged grey transport equation. It is effective solving both the diffusion and P 1 forms of the transport equation. Two dimensional, multi-material test problems are used to compare the solution methods.

SNAP: A General Purpose Network Analysis and Graph Mining Library.

Science.gov (United States)

Leskovec, Jure; Sosič, Rok

2016-10-01

Large networks are becoming a widely used abstraction for studying complex systems in a broad set of disciplines, ranging from social network analysis to molecular biology and neuroscience. Despite an increasing need to analyze and manipulate large networks, only a limited number of tools are available for this task. Here, we describe Stanford Network Analysis Platform (SNAP), a general-purpose, high-performance system that provides easy to use, high-level operations for analysis and manipulation of large networks. We present SNAP functionality, describe its implementational details, and give performance benchmarks. SNAP has been developed for single big-memory machines and it balances the trade-off between maximum performance, compact in-memory graph representation, and the ability to handle dynamic graphs where nodes and edges are being added or removed over time. SNAP can process massive networks with hundreds of millions of nodes and billions of edges. SNAP offers over 140 different graph algorithms that can efficiently manipulate large graphs, calculate structural properties, generate regular and random graphs, and handle attributes and meta-data on nodes and edges. Besides being able to handle large graphs, an additional strength of SNAP is that networks and their attributes are fully dynamic, they can be modified during the computation at low cost. SNAP is provided as an open source library in C++ as well as a module in Python. We also describe the Stanford Large Network Dataset, a set of social and information real-world networks and datasets, which we make publicly available. The collection is a complementary resource to our SNAP software and is widely used for development and benchmarking of graph analytics algorithms.

Defining SNAP by cross-sectional and longitudinal definitions of neurodegeneration

OpenAIRE

Wisse, L.E.M.; Das, S.R.; Davatzikos, C.; Dickerson, B.C.; Xie, S.X.; Yushkevich, P.A.; Wolk, D.A.

2018-01-01

Introduction: Suspected non-Alzheimer's pathophysiology (SNAP) is a biomarker driven designation that represents a heterogeneous group in terms of etiology and prognosis. SNAP has only been identified by cross-sectional neurodegeneration measures, whereas longitudinal measures might better reflect “active” neurodegeneration and might be more tightly linked to prognosis. We compare neurodegeneration defined by cross-sectional ‘hippocampal volume’ only (SNAP/L−) versus both cross-sectional and ...

SNAP sky background at the north ecliptic pole

International Nuclear Information System (INIS)

Aldering, Greg

2002-01-01

I summarize the extant direct and indirect data on the sky background SNAP will see at the North Ecliptic Pole over the wavelength range 0.4 < λ < 1.7 (micro)m. At the spatial resolution of SNAP the sky background due to stars and galaxies is resolved, so the only source considered is zodiacal light. Several models are explored to provide interpolation in wavelength between the broadband data from HST and COBE observations. I believe the input data are now established well enough that the accuracy of the sky background presented here is sufficient for SNAP simulations, and that it will stand up to scrutiny by reviewers

Adaptive solution of the multigroup diffusion equation on irregular structured grids using a conforming finite element method formulation

International Nuclear Information System (INIS)

Ragusa, J. C.

2004-01-01

In this paper, a method for performing spatially adaptive computations in the framework of multigroup diffusion on 2-D and 3-D Cartesian grids is investigated. The numerical error, intrinsic to any computer simulation of physical phenomena, is monitored through an a posteriori error estimator. In a posteriori analysis, the computed solution itself is used to assess the accuracy. By efficiently estimating the spatial error, the entire computational process is controlled through successively adapted grids. Our analysis is based on a finite element solution of the diffusion equation. Bilinear test functions are used. The derived a posteriori error estimator is therefore based on the Hessian of the numerical solution. (authors)

Combined SAFE/SNAP approach to safeguards evaluation

International Nuclear Information System (INIS)

Engi, D.; Chapman, L.D.; Grant, F.H.; Polito, J.

1980-01-01

The scope of a safeguards evaluation model can efficiently address one of two issues: (1) global safeguards effectiveness or (2) vulnerability analysis for individual scenarios. The Safeguards Automated Facility Evaluation (SAFE) focuses on the first issue, while the Safeguards Network Analysis Procedure (SNAP) is directed towards the second. A combined SAFE/SNAP approach to the problem of safeguards evaluation is described and illustrated through an example. 4 refs

Cell-Specific Loss of SNAP25 from Cortical Projection Neurons Allows Normal Development but Causes Subsequent Neurodegeneration.

Science.gov (United States)

Hoerder-Suabedissen, Anna; Korrell, Kim V; Hayashi, Shuichi; Jeans, Alexander; Ramirez, Denise M O; Grant, Eleanor; Christian, Helen C; Kavalali, Ege T; Wilson, Michael C; Molnár, Zoltán

2018-05-30

Synaptosomal associated protein 25 kDa (SNAP25) is an essential component of the SNARE complex regulating synaptic vesicle fusion. SNAP25 deficiency has been implicated in a variety of cognitive disorders. We ablated SNAP25 from selected neuronal populations by generating a transgenic mouse (B6-Snap25tm3mcw (Snap25-flox)) with LoxP sites flanking exon5a/5b. In the presence of Cre-recombinase, Snap25-flox is recombined to a truncated transcript. Evoked synaptic vesicle release is severely reduced in Snap25 conditional knockout (cKO) neurons as shown by live cell imaging of synaptic vesicle fusion and whole cell patch clamp recordings in cultured hippocampal neurons. We studied Snap25 cKO in subsets of cortical projection neurons in vivo (L5-Rbp4-Cre; L6-Ntsr1-Cre; L6b-Drd1a-Cre). cKO neurons develop normal axonal projections, but axons are not maintained appropriately, showing signs of swelling, fragmentation and eventually complete absence. Onset and progression of degeneration are dependent on the neuron type, with L5 cells showing the earliest and most severe axonal loss. Ultrastructural examination revealed that cKO neurites contain autophagosome/lysosome-like structures. Markers of inflammation such as Iba1 and lipofuscin are increased only in adult cKO cortex. Snap25 cKO can provide a model to study genetic interactions with environmental influences in several disorders.

Cyclotron radiation by a multi-group method

International Nuclear Information System (INIS)

Chu, T.C.

1980-01-01

A multi-energy group technique is developed to study conditions under which cyclotron radiation emission can shift a Maxwellian electron distribution into a non-Maxwellian; and if the electron distribution is non-Maxwellian, to study the rate of cyclotron radiation emission as compared to that emitted by a Maxwellian having the same mean electron density and energy. The assumptions in this study are: the electrons should be in an isotropic medium and the magnetic field should be uniform. The multi-group technique is coupled into a multi-group Fokker-Planck computer code to study electron behavior under the influence of cyclotron radiation emission in a self-consistent fashion. Several non-Maxwellian distributions were simulated to compare their cyclotron emissions with the corresponding energy and number density equivalent Maxwellian distribtions

Germination of beans and snap beans seed

Directory of Open Access Journals (Sweden)

Zdravković Milan

2000-01-01

Full Text Available The aim of this study was to investigate germination of good bean seed of the variety Galeb and the bad bean seed of the same variety. We were also interested in germination of bean and snap bean seed damaged by grain weevil, and in germination of the seed treated by freezing which was aimed at controlling grain weevil by cold. We also recorded the differences between bean and snap bean seed, which was or was not treated by freezing in laboratory conditions. This investigation was carried out by applying the two factorial block system. The obtained results were evaluated by the variance analysis and x2 test These results suggest that the bean seed of a bad fraction had low levels of germination, but still it was present. Although the seed of good appearance was carefully selected, germination was slightly lower than it should have been. The seed with the large amount of grain weevils performed a high level germination in laboratory conditions. There were no differences in germination between the seed injured by grain weevil either in beans or in snap beans. As for the seed treated or untreated by freezing, there also were no differences between beans and snap beans. .

Territorial aggressiveness and predation: two possible origins of snapping in the ant Plectroctena minor.

Science.gov (United States)

Dejean, Alain; Suzzoni, Jean-Pierre; Schatz, Bertrand; Orivel, Jérôme

2002-07-01

Plectroctena minor workers have long mandibles that can snap and deliver a sharp blow to intruders or prey, stunning or killing them. Encounters between homocolonial P. minor workers separated for 24 h or 15 days never resulted in snapping, while this behaviour was always noted during encounters between heterocolonial workers on neutral arenas or on the territory of a colony. In the latter case, only the aliens, that generally tried to escape, were snapped at. Snapping also occurred during encounters with workers belonging to sympatric ponerine species. During predation, the percentages of snapping varied according to prey nature, suggesting prey discrimination. Termite soldiers were always snapped at, while other prey were more often snapped close to rather than far from the nest entrances, indicating an intermingling of territorial aggressiveness and predatory behaviour. We discuss the adaptive value of snapping for hunting in galleries.

A numerical method for multigroup slab-geometry discrete ordinates problems with no spatial truncation error

International Nuclear Information System (INIS)

Barros, R.C. de; Larsen, E.W.

1991-01-01

A generalization of the one-group Spectral Green's Function (SGF) method is developed for multigroup, slab-geometry discrete ordinates (S N ) problems. The multigroup SGF method is free from spatial truncation errors; it generated numerical values for the cell-edge and cell-average angular fluxes that agree with the analytic solution of the multigroup S N equations. Numerical results are given to illustrate the method's accuracy

Nuclear data processing and multigroup cross section generation

International Nuclear Information System (INIS)

Kim, Jeong Do; Kil, Chung Sub

1996-01-01

The multigroup constants for WIMS/CASMO were updated with ENDF/B-VI and were tested. The continuous energy MCNP library developed last year was validated against the LWR-simulated critical experiments. The MCNP library will be used to design and analyze nuclear and shielding facilities. The system for generation of MATXS multigroup library and TRANSX code, which is able to prepare the data for the discrete ordinates and diffusion codes from the MATXS library, was established. The MATXS libraries for analyses of thermal and fast critical experiments were generated and tested. The MATXS/TRANSX system for the discrete ordinates and diffusion codes will be useful for nuclear analyses. 10 tabs., 5 figs., 17 refs. (Author)

Triggered Snap-Through of Bistable Shells

Science.gov (United States)

Cai, Yijie; Huang, Shicheng; Trase, Ian; Hu, Nan; Chen, Zi

Elastic bistable shells are common structures in nature and engineering, such as the lobes of the Venus flytrap or the surface of a toy jumping poppers. Despite their ubiquity, the parameters that control the bistability of such structures are not well understood. In this study, we explore how the geometrical features of radially symmetric elastic shells affect the shape and potential energy of a shell's stable states, and how to tune certain parameters in order to generate a snap-through transition from a convex semi-stable state to concave stable state. We fabricated a series of elastic shells with varying geometric parameters out of silicone rubber and measured the resulting potential energy in the semi-stable state. Finite element simulations were also conducted in order to determine the deformation and stress in the shells during snap-through. It was found that the energy of the semi-stable state is controlled by only two geometric parameters and a dimensionless ratio. We also noted two distinct transitions during snap-through, one between monostability and semi-bistability (the state a popper toy is in before it snaps-through and jumps), and a second transition between semi-bistability and true bistability. This work shows that it is possible to use a set of simple parameters to tailor the energy landscape of an elastic shell in order to generate complex trigger motions for their potential use in smart applications. Z.C. acknowledge support from Society in Science-Branco Weiss Fellowship, administered by ETH Zurich.

DRAGON 3.05D, Reactor Cell Calculation System with Burnup

International Nuclear Information System (INIS)

2007-01-01

1 - Description of program or function: The computer code DRAGON contains a collection of models that can simulate the neutron behavior of a unit cell or a fuel assembly in a nuclear reactor. It includes all of the functions that characterize a lattice cell code, namely: the interpolation of microscopic cross sections supplied by means of standard libraries; resonance self-shielding calculations in multidimensional geometries; multigroup and multidimensional neutron flux calculations that can take into account neutron leakage; transport-transport or transport-diffusion equivalence calculations as well as editing of condensed and homogenized nuclear properties for reactor calculations; and finally isotopic depletion calculations. 2 - Methods: The code DRAGON contains a multigroup flux solver conceived that can use a various algorithms to solve the neutron transport equation for the spatial and angular distribution of the flux. Each of these algorithms is presented in the form of a one-group solution procedure where the contributions from other energy groups are considered as sources. The current release of DRAGON contains five such algorithms. The JPM option that solves the integral transport equation using the J+- method, (interface current method applied to homogeneous blocks); the SYBIL option that solves the integral transport equation using the collision probability method for simple one dimensional (1-D) or two dimensional (2-D) geometries and the interface current method for 2-D Cartesian or hexagonal assemblies; the EXCELL/NXT option to solve the integral transport equation using the collision probability method for more general 2-D geometries and for three dimensional (3-D) assemblies; the MOCC option to solve the transport equation using the method of cyclic characteristics in 2-D Cartesian, and finally the MCU option to solve the transport equation using the method of characteristics (non cyclic) for 3-D Cartesian geometries. The execution of DRAGON is

Kinesin-1 plays a role in transport of SNAP-25 to the plasma membrane

Energy Technology Data Exchange (ETDEWEB)

Morton, April M.; Cunningham, Anthony L. [Centre for Virus Research, Westmead Millennium Institute, The University of Sydney and Westmead Hospital, Westmead, NSW 2145 (Australia); Diefenbach, Russell J., E-mail: russell_diefenbach@wmi.usyd.edu.au [Centre for Virus Research, Westmead Millennium Institute, The University of Sydney and Westmead Hospital, Westmead, NSW 2145 (Australia)

2010-01-01

The cellular molecular motor kinesin-1 mediates the microtubule-dependent transport of a range of cargo. We have previously identified an interaction between the cargo-binding domain of kinesin-1 heavy chain KIF5B and the membrane-associated SNARE proteins SNAP-25 and SNAP-23. In this study we further defined the minimal SNAP-25 binding domain in KIF5B to residues 874-894. Overexpression of a fragment of KIF5B (residues 594-910) resulted in significant colocalization with SNAP-25 with resulting blockage of the trafficking of SNAP-25 to the periphery of cells. This indicates that kinesin-1 facilitates the transport of SNAP-25 containing vesicles as a prerequisite to SNAP-25 driven membrane fusion events.

CASTRO: A NEW COMPRESSIBLE ASTROPHYSICAL SOLVER. III. MULTIGROUP RADIATION HYDRODYNAMICS

International Nuclear Information System (INIS)

Zhang, W.; Almgren, A.; Bell, J.; Howell, L.; Burrows, A.; Dolence, J.

2013-01-01

We present a formulation for multigroup radiation hydrodynamics that is correct to order O(v/c) using the comoving-frame approach and the flux-limited diffusion approximation. We describe a numerical algorithm for solving the system, implemented in the compressible astrophysics code, CASTRO. CASTRO uses a Eulerian grid with block-structured adaptive mesh refinement based on a nested hierarchy of logically rectangular variable-sized grids with simultaneous refinement in both space and time. In our multigroup radiation solver, the system is split into three parts: one part that couples the radiation and fluid in a hyperbolic subsystem, another part that advects the radiation in frequency space, and a parabolic part that evolves radiation diffusion and source-sink terms. The hyperbolic subsystem and the frequency space advection are solved explicitly with high-order Godunov schemes, whereas the parabolic part is solved implicitly with a first-order backward Euler method. Our multigroup radiation solver works for both neutrino and photon radiation.

Elaboration of a nodal method to solve the steady state multigroup diffusion equation. Study and use of the multigroup diffusion code DAHRA

International Nuclear Information System (INIS)

Halilou, A.; Lounici, A.

1981-01-01

The subject is divided in two parts: In the first part a nodal method has been worked out to solve the steady state multigroup diffusion equation. This method belongs to the same set of nodal methods currently used to calculate the exact fission powers and neutron fluxes in a very short computing time. It has been tested on a two dimensional idealized reactors. The effective multiplication factor and the fission powers for each fuel element have been calculated. The second part consists in studying and mastering the multigroup diffusion code DAHRA - a reduced version of DIANE - a two dimensional code using finite difference method

MCFT: a program for calculating fast and thermal neutron multigroup constants

International Nuclear Information System (INIS)

Yang Shunhai; Sang Xinzeng

1993-01-01

MCFT is a program for calculating the fast and thermal neutron multigroup constants, which is redesigned from some codes for generation of thermal neutron multigroup constants and for fast neutron multigroup constants adapted on CYBER 825 computer. It uses indifferently as basic input with the evaluated nuclear data contained in the ENDF/B (US), KEDAK (Germany) and UK (United Kingdom) libraries. The code includes a section devoted to the generation of resonant Doppler broadened cross section in the framework of single-or multi-level Breit-Wigner formalism. The program can compute the thermal neutron scattering law S (α, β, T) as the input data in tabular, free gas or diffusion motion form. It can treat up to 200 energy groups and Legendre moments up to P 5 . The output consists of various reaction multigroup constants in all neutron energy range desired in the nuclear reactor design and calculation. Three options in input file can be used by the user. The output format is arbitrary and defined by user with a minimum of program modification. The program includes about 15,000 cards and 184 subroutines. FORTRAN 5 computer language is used. The operation system is under NOS 2 on computer CYBER 825

Digital Snaps

DEFF Research Database (Denmark)

Sandbye, Mette; Larsen, Jonas

. Distance as the New Punctum / Mikko Villi -- pt. II. FAMILY ALBUMS IN TRANSITION -- ch. 4. How Digital Technologies Do Family Snaps, Only Better / Gillian Rose -- ch. 5. Friendship Photography: Memory, Mobility and Social Networking / Joanne Garde-Hansen -- ch. 6. Play, Process and Materiality in Japanese...... -- ch. 9. Retouch Yourself: The Pleasures and Politics of Digital Cosmetic Surgery / Tanya Sheehan -- ch. 10. Virtual Selves: Art and Digital Autobiography / Louise Wolthers -- ch. 11. Mobile-Media Photography: New Modes of Engagement / Michael Shanks and Connie Svabo....

Association of impulsivity and polymorphic microRNA-641 target sites in the SNAP-25 gene.

Directory of Open Access Journals (Sweden)

Nóra Németh

Full Text Available Impulsivity is a personality trait of high impact and is connected with several types of maladaptive behavior and psychiatric diseases, such as attention deficit hyperactivity disorder, alcohol and drug abuse, as well as pathological gambling and mood disorders. Polymorphic variants of the SNAP-25 gene emerged as putative genetic components of impulsivity, as SNAP-25 protein plays an important role in the central nervous system, and its SNPs are associated with several psychiatric disorders. In this study we aimed to investigate if polymorphisms in the regulatory regions of the SNAP-25 gene are in association with normal variability of impulsivity. Genotypes and haplotypes of two polymorphisms in the promoter (rs6077690 and rs6039769 and two SNPs in the 3' UTR (rs3746544 and rs1051312 of the SNAP-25 gene were determined in a healthy Hungarian population (N = 901 using PCR-RFLP or real-time PCR in combination with sequence specific probes. Significant association was found between the T-T 3' UTR haplotype and impulsivity, whereas no association could be detected with genotypes or haplotypes of the promoter loci. According to sequence alignment, the polymorphisms in the 3' UTR of the gene alter the binding site of microRNA-641, which was analyzed by luciferase reporter system. It was observed that haplotypes altering one or two nucleotides in the binding site of the seed region of microRNA-641 significantly increased the amount of generated protein in vitro. These findings support the role of polymorphic SNAP-25 variants both at psychogenetic and molecular biological levels.

A Brief Description of the Kokkos implementation of the SNAP potential in ExaMiniMD.

Energy Technology Data Exchange (ETDEWEB)

Thompson, Aidan P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Trott, Christian Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-11-01

Within the EXAALT project, the SNAP [1] approach is being used to develop high accuracy potentials for use in large-scale long-time molecular dynamics simulations of materials behavior. In particular, we have developed a new SNAP potential that is suitable for describing the interplay between helium atoms and vacancies in high-temperature tungsten[2]. This model is now being used to study plasma-surface interactions in nuclear fusion reactors for energy production. The high-accuracy of SNAP potentials comes at the price of increased computational cost per atom and increased computational complexity. The increased cost is mitigated by improvements in strong scaling that can be achieved using advanced algorithms [3].

Three-dimensional h-adaptivity for the multigroup neutron diffusion equations

KAUST Repository

Wang, Yaqi

2009-04-01

Adaptive mesh refinement (AMR) has been shown to allow solving partial differential equations to significantly higher accuracy at reduced numerical cost. This paper presents a state-of-the-art AMR algorithm applied to the multigroup neutron diffusion equation for reactor applications. In order to follow the physics closely, energy group-dependent meshes are employed. We present a novel algorithm for assembling the terms coupling shape functions from different meshes and show how it can be made efficient by deriving all meshes from a common coarse mesh by hierarchic refinement. Our methods are formulated using conforming finite elements of any order, for any number of energy groups. The spatial error distribution is assessed with a generalization of an error estimator originally derived for the Poisson equation. Our implementation of this algorithm is based on the widely used Open Source adaptive finite element library deal.II and is made available as part of this library\\'s extensively documented tutorial. We illustrate our methods with results for 2-D and 3-D reactor simulations using 2 and 7 energy groups, and using conforming finite elements of polynomial degree up to 6. © 2008 Elsevier Ltd. All rights reserved.

Research of the application of multi-group libraries based on ENDF/B-VII library in the reactor design

International Nuclear Information System (INIS)

Mi Aijun; Li Junjie

2010-01-01

In this paper the multi-group libraries were constructed by processing ENDF/B-VII neutron incident files into multi-group structure, and the application of the multi-group libraries in the pressurized-water reactor(PWR) design was studied. The construction of the multi-group library is realized by using the NJOY nuclear data processing system. The code can process the neutron cross section files form ENDF format to MATXS format which was required in SN code. Two dimension transport theory code of discrete ordinates DORT was used to verify the multi-group libraries and the method of the construction by comparing calculations for some representative benchmarks. We made the PWR shielding calculation by using the multi-group libraries and studied the influence of the parameters involved during the construction of the libraries such as group structure, temperatures and weight functions on the shielding design of the PWR. This work is the preparation for the construction of the multi-group library which will be used in PWR shielding design in engineering. (authors)

Proposal to extend CSEWG neutron and photon multigroup structures for wider applications

International Nuclear Information System (INIS)

LaBauve, R.J.; Wilson, W.B.

1976-02-01

The 239-group neutron multigroup structure recommended by the Codes and Formats Subcommittee of the cross section evaluation working group (CSEWG) for use in LMFBR design is not well suited for application in certain other areas, particularly thermal reactor design. This report describes a proposal for a neutron group structure consisting of 347 groups, which is an extension of the CSEWG group structure into the thermal range, and also includes more detail in other energy ranges important in LWR, HTGR, GCFR, and CTR design. Similarly, a proposed extension of the CSEWG 94-group photon multigroup structure to 103 groups is described. A subset of the neutron multigroup structure, consisting of 154 groups and for use in power reactor studies, is also presented

Antioxidant and Hypolipidaemic Effect of Raw Green Snap (Phaseolus vulgaris) on Aged Male Rats Exposed to gamma Irradiation

International Nuclear Information System (INIS)

Abed EI-Gawad, E.I.; Aiad, S.K.

2008-01-01

This Study was established to assess the effect of supplemental dietary raw green snap (Phaseolus vulgaris) for three months to overcome gamma-irradiation induced alterations on some oxidant/ antioxidant parameters (Fe 3+ , Cu 2+ , total iron, ferritin, transferrin and ceruloplasmin) and the hyper lipidemic state (triglycerides, cholesterol, high- and low density lipoprotein (HDL-c and LDL-c) in aged male rats. Raw green snap is an indigenous plant used in Unani and Ayurvedic medicine in India. The study also aimed to estimate the effect of dietary raw green snap on general health through the follow up of body weight and mortality during the course of supplementation. Thirty-two aged male rats (24 months, 370-375 g) were divided equally into four groups. 1- Control group, the animals fed on a balanced diet for 3 months. 2- Supplemented group, the animals balanced diet was supplemented with raw green snap (70 g / kg body wt/ day) for 3 months. 3- Irradiated group, the animals fed on a balanced diet for 3 months were then exposed to whole body y-radiation at a dose level of 4 Gy. 4-Supplemented-irradiated group, the animals' balanced diet was supplemented with raw green snap (70 g/ kg/ day) for three months and then exposed to whole body gamma irradiation at a dose level of 4 Gy. The blood samples were taken from orbital venous plexuses after 48 h of stopping green snap supplementation (supplemented group) or after irradiation (irradiated and supplemented gamma-irradiated groups). The results obtained showed reduction in the body wt in green snap supplemented group which increased gradually concomitant with occurrence of animal mortality on week 7 reaching II) maximal values (-32.79 and 33.33 %) respectively, on week 12 of supplementation. Also, the supplemented group showed non significant changes in tested parameters although the level of total iron and triglycerides recorded noticeable changes as compared with controls

The Classroom Animal: Snapping Turtles.

Science.gov (United States)

Kramer, David C.

1987-01-01

Describes the distinctive features of the common snapping turtle. Discusses facts and misconceptions held about the turtle. Provides guidelines for proper care and treatment of a young snapper in a classroom environment. (ML)

A VESICLE TRAFFICKING PROTEIN αSNAP REGULATES PANETH CELL DIFFERENTIATION IN VIVO

Science.gov (United States)

Lechuga, Susana; Naydenov, Nayden G.; Feygin, Alex; Jimenez, Antonio J.; Ivanov, Andrei I.

2017-01-01

A soluble N-ethylmaleimide-sensitive factor-attachment protein alpha (αSNAP) is a multifunctional scaffolding protein that regulates intracellular vesicle trafficking and signaling. In cultured intestinal epithelial cells, αSNAP has been shown to be essential for cell survival, motility, and adhesion; however, its physiologic functions in the intestinal mucosa remain unknown. In the present study, we used a mouse with a spontaneous hydrocephalus with hop gait (hyh) mutation of αSNAP to examine the roles of this trafficking protein in regulating intestinal epithelial homeostasis in vivo. Homozygous hyh mice demonstrated decreased expression of αSNAP protein in the intestinal epithelium, but did not display gross abnormalities of epithelial architecture in the colon and ileum. Such αSNAP depletion attenuated differentiation of small intestinal epithelial enteroids ex vivo. Furthermore, αSNAP-deficient mutant animals displayed reduced formation of lysozyme granules in small intestinal crypts and decreased expression of lysozyme and defensins in the intestinal mucosa, which is indicative of defects in Paneth cell differentiation. By contrast, development of Goblet cells, enteroendocrine cells, and assembly of enterocyte apical junctions was not altered in hyh mutant mice. Our data revealed a novel role of αSNAP in the intestinal Paneth cell differentiation in vivo. PMID:28359759

Concentration of Tobacco Advertisements at SNAP and WIC Stores, Philadelphia, Pennsylvania, 2012

Science.gov (United States)

Chilton, Mariana; Zhao, Qian-Wei; Szymkowiak, Dorota; Coffman, Ryan; Mallya, Giridhar

2015-01-01

Introduction Tobacco advertising is widespread in urban areas with racial/ethnic minority and low-income households that participate in nutrition assistance programs. Tobacco sales and advertising are linked to smoking behavior, which may complicate matters for low-income families struggling with disparate health risks relating to nutrition and chronic disease. We investigated the relationship between the amount and type of tobacco advertisements on tobacco outlets and the outlet type and location. Methods By using field visits and online images, we inspected all licensed tobacco retail outlets in Philadelphia (N = 4,639). Point pattern analyses were used to identify significant clustering of tobacco outlets and outlets with exterior tobacco advertisements. Logistic regression was used to analyze the relationship between the outlet’s acceptance of Supplemental Nutrition Assistance Program (SNAP) and Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) and the presence of tobacco advertisements. Results Tobacco outlets with exterior tobacco advertisements were significantly clustered in several high-poverty areas. Controlling for racial/ethnic and income composition and land use, SNAP and WIC vendors were significantly more likely to have exterior (SNAP odds ratio [OR], 2.11; WIC OR, 1.59) and interior (SNAP OR, 3.43; WIC OR, 1.69) tobacco advertisements than other types of tobacco outlets. Conclusion Tobacco advertising is widespread at retail outlets, particularly in low-income and racial/ethnic minority neighborhoods. Policy makers may be able to mitigate the effects of this disparate exposure through tobacco retail licensing, local sign control rules, and SNAP and WIC authorization. PMID:25654220

Application of direct discrete method (DDM) to multigroup neutron transport problems

International Nuclear Information System (INIS)

Vosoughi, Naser; Salehi, Ali Akbar; Shahriari, Majid

2003-01-01

The Direct Discrete Method (DDM), which produced excellent results for one-group neutron transport problems, has been developed for multigroup energy. A multigroup neutron transport discrete equation has been produced for a cylindrical shape fuel element with and without associated coolant regions with two boundary conditions. The calculations are illustrated for two-group energy by graphs showing the fast and thermal fluxes. The validity of the results are tested against the results obtained by the ANISN code. (author)

Multigroup and coupled forward-adjoint Monte Carlo calculation efficiencies for secondary neutron doses from proton beams

International Nuclear Information System (INIS)

Kelsey IV, Charles T.; Prinja, Anil K.

2011-01-01

We evaluate the Monte Carlo calculation efficiency for multigroup transport relative to continuous energy transport using the MCNPX code system to evaluate secondary neutron doses from a proton beam. We consider both fully forward simulation and application of a midway forward adjoint coupling method to the problem. Previously we developed tools for building coupled multigroup proton/neutron cross section libraries and showed consistent results for continuous energy and multigroup proton/neutron transport calculations. We observed that forward multigroup transport could be more efficient than continuous energy. Here we quantify solution efficiency differences for a secondary radiation dose problem characteristic of proton beam therapy problems. We begin by comparing figures of merit for forward multigroup and continuous energy MCNPX transport and find that multigroup is 30 times more efficient. Next we evaluate efficiency gains for coupling out-of-beam adjoint solutions with forward in-beam solutions. We use a variation of a midway forward-adjoint coupling method developed by others for neutral particle transport. Our implementation makes use of the surface source feature in MCNPX and we use spherical harmonic expansions for coupling in angle rather than solid angle binning. The adjoint out-of-beam transport for organs of concern in a phantom or patient can be coupled with numerous forward, continuous energy or multigroup, in-beam perturbations of a therapy beam line configuration. Out-of-beam dose solutions are provided without repeating out-of-beam transport. (author)

A multilevel in space and energy solver for multigroup diffusion eigenvalue problems

Directory of Open Access Journals (Sweden)

Ben C. Yee

2017-09-01

Full Text Available In this paper, we present a new multilevel in space and energy diffusion (MSED method for solving multigroup diffusion eigenvalue problems. The MSED method can be described as a PI scheme with three additional features: (1 a grey (one-group diffusion equation used to efficiently converge the fission source and eigenvalue, (2 a space-dependent Wielandt shift technique used to reduce the number of PIs required, and (3 a multigrid-in-space linear solver for the linear solves required by each PI step. In MSED, the convergence of the solution of the multigroup diffusion eigenvalue problem is accelerated by performing work on lower-order equations with only one group and/or coarser spatial grids. Results from several Fourier analyses and a one-dimensional test code are provided to verify the efficiency of the MSED method and to justify the incorporation of the grey diffusion equation and the multigrid linear solver. These results highlight the potential efficiency of the MSED method as a solver for multidimensional multigroup diffusion eigenvalue problems, and they serve as a proof of principle for future work. Our ultimate goal is to implement the MSED method as an efficient solver for the two-dimensional/three-dimensional coarse mesh finite difference diffusion system in the Michigan parallel characteristics transport code. The work in this paper represents a necessary step towards that goal.

Synaptotagmin interaction with SNAP-25 governs vesicle docking, priming, and fusion triggering

DEFF Research Database (Denmark)

Mohrmann, Ralf; de Wit, Heidi; Connell, Emma

2013-01-01

ramifications of proposed SNAP-25 × synaptotagmin-1 interaction in mouse chromaffin cells. We demonstrate that the postulated central binding domain surrounding layer zero covers both SNARE motifs of SNAP-25 and is essential for vesicle docking, priming, and fast fusion-triggering. Mutation of this site caused...... but is required for the full size of the readily releasable pool. Intriguingly, we also found that mutation of synaptotagmin-1 interaction sites led to more pronounced phenotypes in the context of the adult neuronal isoform SNAP-25B than in the embryonic isoform SNAP-25A. Further experiments demonstrated...

78 FR 52899 - Supplemental Nutrition Assistance Program (SNAP) Enhancing Retail Food Store Eligibility...

Science.gov (United States)

2013-08-27

... food choices, access to food, and retailer operations. Listening session attendees will be provided... food, be eligible to participate in SNAP? 10. Restaurants are generally prohibited from being SNAP... in an area where no store meets basic eligibility criteria for SNAP authorization, how should FNS...

Gray and multigroup radiation transport models for two-dimensional binary stochastic media using effective opacities

International Nuclear Information System (INIS)

Olson, Gordon L.

2016-01-01

One-dimensional models for the transport of radiation through binary stochastic media do not work in multi-dimensions. Authors have attempted to modify or extend the 1D models to work in multidimensions without success. Analytic one-dimensional models are successful in 1D only when assuming greatly simplified physics. State of the art theories for stochastic media radiation transport do not address multi-dimensions and temperature-dependent physics coefficients. Here, the concept of effective opacities and effective heat capacities is found to well represent the ensemble averaged transport solutions in cases with gray or multigroup temperature-dependent opacities and constant or temperature-dependent heat capacities. In every case analyzed here, effective physics coefficients fit the transport solutions over a useful range of parameter space. The transport equation is solved with the spherical harmonics method with angle orders of n=1 and 5. Although the details depend on what order of solution is used, the general results are similar, independent of angular order. - Highlights: • Gray and multigroup radiation transport is done through 2D stochastic media. • Approximate models for the mean radiation field are found for all test problems. • Effective opacities are adjusted to fit the means of stochastic media transport. • Test problems include temperature dependent opacities and heat capacities • Transport solutions are done with angle orders n=1 and 5.

Snapping turtles, a biological screen for PCB's

Energy Technology Data Exchange (ETDEWEB)

Olafsson, P.G.; Bryan, A.M.; Bush, B.; Stone, W.

1983-01-01

Snapping turtles are capable of storing extremely high concentration of organochlorine compounds in their fat without any apparent detrimental effect. This tolerance, to high bioconcentration, permits a wide gradation between the extremes in pollution levels and facilitates the detection of extremely toxic substances present in trace amounts. Consequently snapping turtles provide an excellent biological screen for these compounds.

NUMERICAL MULTIGROUP TRANSIENT ANALYSIS OF SLAB NUCLEAR REACTOR WITH THERMAL FEEDBACK

Directory of Open Access Journals (Sweden)

Filip Osuský

2016-12-01

Full Text Available The paper describes a new numerical code for multigroup transient analyses with thermal feedback. The code is developed at Institute of Nuclear and Physical Engineering. It is necessary to carefully investigate transient states of fast neutron reactors, due to recriticality issues after accident scenarios. The code solves numerical diffusion equation for 1D problem with possible neutron source incorporation. Crank-Nicholson numerical method is used for the transient states. The investigated cases are describing behavior of PWR fuel assembly inside of spent fuel pool and with the incorporated neutron source for better illustration of thermal feedback.

Reference calculations on critical assemblies with Apollo2 code working with a fine multigroup mesh; Calculs de reference avec un maillage multigroupe fin sur des assemblages critiques par Apollo2

Energy Technology Data Exchange (ETDEWEB)

Aggery, A

1999-12-01

The objective of this thesis is to add to the multigroup transport code APOLLO2 the capability to perform deterministic reference calculations, for any type of reactor, using a very fine energy mesh of several thousand groups. This new reference tool allows us to validate the self-shielding model used in industrial applications, to perform depletion calculations, differential effects calculations, critical buckling calculations or to evaluate precisely data required by the self shielding model. At its origin, APOLLO2 was designed to perform routine calculations with energy meshes around one hundred groups. That is why, in the current format of cross sections libraries, almost each value of the multigroup energy transfer matrix is stored. As this format is not convenient for a high number of groups (concerning memory size), we had to search out a new format for removal matrices and consequently to modify the code. In the new format we found, only some values of removal matrices are kept (these values depend on a reconstruction precision choice), the other ones being reconstructed by a linear interpolation, what reduces the size of these matrices. Then we had to show that APOLLO2 working with a fine multigroup mesh had the capability to perform reference calculations on any assembly geometry. For that, we successfully carried out the validation with several calculations for which we compared APOLLO2 results (obtained with the universal mesh of 11276 groups) to results obtained with Monte Carlo codes (MCNP, TRIPOLI4). Physical analysis led with this new tool have been very fruitful and show a great potential for such an R and D tool. (author)

Cutaneous fibroma in a captive common snapping turtle (Chelydra serpentina).

Science.gov (United States)

Gonzales-Viera, O; Bauer, G; Bauer, A; Aguiar, L S; Brito, L T; Catão-Dias, J L

2012-11-01

An adult female common snapping turtle (Chelydra serpentina) had a mass on the plantar surface of the right forelimb that was removed surgically. Microscopical examination revealed many spindle cells with mild anisocytosis and anisokaryosis and a surrounding collagenous stroma. There were no mitoses. Immunohistochemistry showed that the spindle cells expressed vimentin, but not desmin. A diagnosis of cutaneous fibroma was made. Tumours are reported uncommonly in chelonian species. Cutaneous fibroma has been diagnosed in an alligator snapping turtle (Macrochelys temminckii), but not previously in a common snapping turtle. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Final report [on solving the multigroup diffusion equations

International Nuclear Information System (INIS)

Birkhoff, G.

1975-01-01

Progress achieved in the development of variational methods for solving the multigroup neutron diffusion equations is described. An appraisal is made of the extent to which improved variational methods could advantageously replace difference methods currently used

Interface discontinuity factors in the modal Eigenspace of the multigroup diffusion matrix

International Nuclear Information System (INIS)

Garcia-Herranz, N.; Herrero, J.J.; Cuervo, D.; Ahnert, C.

2011-01-01

Interface discontinuity factors based on the Generalized Equivalence Theory are commonly used in nodal homogenized diffusion calculations so that diffusion average values approximate heterogeneous higher order solutions. In this paper, an additional form of interface correction factors is presented in the frame of the Analytic Coarse Mesh Finite Difference Method (ACMFD), based on a correction of the modal fluxes instead of the physical fluxes. In the ACMFD formulation, implemented in COBAYA3 code, the coupled multigroup diffusion equations inside a homogenized region are reduced to a set of uncoupled modal equations through diagonalization of the multigroup diffusion matrix. Then, physical fluxes are transformed into modal fluxes in the Eigenspace of the diffusion matrix. It is possible to introduce interface flux discontinuity jumps as the difference of heterogeneous and homogeneous modal fluxes instead of introducing interface discontinuity factors as the ratio of heterogeneous and homogeneous physical fluxes. The formulation in the modal space has been implemented in COBAYA3 code and assessed by comparison with solutions using classical interface discontinuity factors in the physical space. (author)

Multi-Group Library Generation with Explicit Resonance Interference Using Continuous Energy Monte Carlo Calculation

Energy Technology Data Exchange (ETDEWEB)

Park, Ho Jin; Cho, Jin Young [KAERI, Daejeon (Korea, Republic of); Kim, Kang Seog [Oak Ridge National Laboratory, Oak Ridge (United States); Hong, Ser Gi [Kyung Hee University, Yongin (Korea, Republic of)

2016-05-15

In this study, multi-group cross section libraries for the DeCART code were generated using a new procedure. The new procedure includes generating the RI tables based on the MC calculations, correcting the effective fission product yield calculations, and considering most of the fission products as resonant nuclides. KAERI (Korea Atomic Energy Research Institute) has developed the transport lattice code KARMA (Kernel Analyzer by Ray-tracing Method for fuel Assembly) and DeCART (Deterministic Core Analysis based on Ray Tracing) for a multi-group neutron transport analysis of light water reactors (LWRs). These codes adopt the method of characteristics (MOC) to solve the multi-group transport equation and resonance fixed source problem, the subgroup and the direct iteration method with resonance integral tables for resonance treatment. With the development of the DeCART and KARMA code, KAERI has established its own library generation system for a multi-group transport calculation. In the KAERI library generation system, the multi-group average cross section and resonance integral (RI) table are generated and edited using PENDF (point-wise ENDF) and GENDF (group-wise ENDF) produced by the NJOY code. The new method does not need additional processing because the MC method can handle any geometry information and material composition. In this study, the new method is applied to the dominant resonance nuclide such as U{sup 235} and U{sup 238} and the conventional method is applied to the minor resonance nuclides. To examine the newly generated multi-group cross section libraries, various benchmark calculations such as pin-cell, FA, and core depletion problem are performed and the results are compared with the reference solutions. Overall, the results by the new method agree well with the reference solution. The new procedure based on the MC method were verified and provided the multi-group library that can be used in the SMR nuclear design analysis.

An experience in the use the Sn method for 1D/2D/3D spallation target neutronics and shielding calculations

International Nuclear Information System (INIS)

Kryuchkov, V.P.; Chang, J.; Young-Sik, Cho; Voloschenko, A.M.; Sumaneev, O.V.

2005-01-01

A discrete ordinate algorithm for coupled charged/neutral particle transport calculations of the pencil beam problems in 3-dimensional r, θ, z and x,y,z geometries is developed. It is based on the use of the second order of accuracy adaptive WDD (AWDD) scheme for approximation both the continuous slowing down and streaming terms of the charged particle transport equation, and a suitable algorithm for treatment of the extended un collided flux from an initially mono directional beam of charged particles with given spatial distribution in the perpendicular section of the beam. The developed algorithm is an extension to the 3D geometry case of a similar approach, previously implemented for plane mono directional beam in 1D transport code ROZ-6 and for pencil beam r,z geometry problems in 2D transport code KASKAD-S. It is implemented in the 3D transport code KATRIN-2.0 and is applied to the high-energy coupled proton-pion-neutron-photon transport calculations. The updated version of multigroup cross section library SADCO-2.4 for nucleon-meson cascade calculations, coupled with standard neutron and gamma-ray cross-section libraries (CONSYST/ABBN-93 and BUGLE96, for example) below 20 MeV, is used. Some numerical examples are given. (authors)

Proposal to extend CSEWG neutron and photon multigroup structures for wider applications. [Tables

Energy Technology Data Exchange (ETDEWEB)

LaBauve, R.J.; Wilson, W.B.

1976-02-01

The 239-group neutron multigroup structure recommended by the Codes and Formats Subcommittee of the cross section evaluation working group (CSEWG) for use in LMFBR design is not well suited for application in certain other areas, particularly thermal reactor design. This report describes a proposal for a neutron group structure consisting of 347 groups, which is an extension of the CSEWG group structure into the thermal range, and also includes more detail in other energy ranges important in LWR, HTGR, GCFR, and CTR design. Similarly, a proposed extension of the CSEWG 94-group photon multigroup structure to 103 groups is described. A subset of the neutron multigroup structure, consisting of 154 groups and for use in power reactor studies, is also presented.

Obtaining incremental multigroup cross sections for CANDU super cells with reactivity devices

International Nuclear Information System (INIS)

Balaceanu, V.; Constantin, M.

2001-01-01

In the last 20 years a multigroup methodology WIMS - PIJXYZ (WP) was developed and validated at INR Pitesti for obtaining incremental cross sections for reactivity devices in CANDU reactors. This is an alternate methodology to the CANDU classic methodology (experimentally adjusted) based on the POWDERPUFS and MULTICELL computer codes. The 2D supercell calculation performed with the WIMS code, that is a NEA Data Bank transport code, and which produces multigroup cross sections (on 18 energy groups) for CANDU supercell material (standard and perturbed, with and without reactivity devices). To obtain an as correct as possible 3D modelling for the CANDU supercells containing reactivity devices, the WIMS cross sections are used as input data for the PIJXYZ code, thus obtaining homogenized cross sections for CANDU supercells. PIJXYZ is an integral transport code based on the formalism of the first collision probabilities. It is analogue to the SHETAN code and it was created for neutron analyzes at cell level for CANDU type reactors were the reactivity devices are perpendicular to the fuel channels. The coordinate system used in PIJXYZ is a mixed one, namely a rectangular-cylindrical system. The geometric model used in PIJXYZ is presented. The fuel beam is represented by a horizontal cylinder and the reactivity device by a vertical one both cylinders being immersed in the moderator. Two supercell types were considered: a perturbed supercell (containing a reactivity device) and the standard supercell were the place of reactivity device is occupied by the moderator. The incremental cross sections for reactivity device are obtained as differences between the homogenized over supercell cross sections (with reactivity device) and homogenized over standards supercell (without device) cross sections. The PIJXYZ computation may be done on an energy cutting with 2 up to 18 groups. The validation of VIMS - PIJXYZ was done on the basis of several benchmark and by comparison with

A vesicle trafficking protein αSNAP regulates Paneth cell differentiation in vivo.

Science.gov (United States)

Lechuga, Susana; Naydenov, Nayden G; Feygin, Alex; Jimenez, Antonio J; Ivanov, Andrei I

2017-05-13

A soluble N-ethylmaleimide-sensitive factor-attachment protein alpha (αSNAP) is a multifunctional scaffolding protein that regulates intracellular vesicle trafficking and signaling. In cultured intestinal epithelial cells, αSNAP has been shown to be essential for cell survival, motility, and adhesion; however, its physiologic functions in the intestinal mucosa remain unknown. In the present study, we used a mouse with a spontaneous hydrocephalus with hop gait (hyh) mutation of αSNAP to examine the roles of this trafficking protein in regulating intestinal epithelial homeostasis in vivo. Homozygous hyh mice demonstrated decreased expression of αSNAP protein in the intestinal epithelium, but did not display gross abnormalities of epithelial architecture in the colon and ileum. Such αSNAP depletion attenuated differentiation of small intestinal epithelial enteroids ex vivo. Furthermore, αSNAP-deficient mutant animals displayed reduced formation of lysozyme granules in small intestinal crypts and decreased expression of lysozyme and defensins in the intestinal mucosa, which is indicative of defects in Paneth cell differentiation. By contrast, development of Goblet cells, enteroendocrine cells, and assembly of enterocyte apical junctions was not altered in hyh mutant mice. Our data revealed a novel role of αSNAP in the intestinal Paneth cell differentiation in vivo. Copyright © 2017 Elsevier Inc. All rights reserved.

ERRORJ, Multigroup covariance matrices generation from ENDF-6 format

International Nuclear Information System (INIS)

Chiba, Go

2007-01-01

1 - Description of program or function: ERRORJ produces multigroup covariance matrices from ENDF-6 format following mainly the methods of the ERRORR module in NJOY94.105. New version differs from previous version in the following features: Additional features in ERRORJ with respect to the NJOY94.105/ERRORR module: - expands processing for the covariance matrices of resolved and unresolved resonance parameters; - processes average cosine of scattering angle and fission spectrum; - treats cross-correlation between different materials and reactions; - accepts input of multigroup constants with various forms (user input, GENDF, etc.); - outputs files with various formats through utility NJOYCOVX (COVERX format, correlation matrix, relative error and standard deviation); - uses a 1% sensitivity method for processing of resonance parameters; - ERRORJ can process the JENDL-3.2 and 3.3 covariance matrices. Additional features of the version 2 with respect to the previous version of ERRORJ: - Since the release of version 2, ERRORJ has been modified to increase its reliability and stability, - calculation of the correlation coefficients in the resonance region, - Option for high-speed calculation is implemented, - Perturbation amount is optimised in a sensitivity calculation, - Effect of the resonance self-shielding can be considered, - a compact covariance format (LCOMP=2) proposed by N. M. Larson can be read. Additional features of the version 2.2.1 with respect to the previous version of ERRORJ: - Several routines were modified to reduce calculation time. The new one needs shorter calculation time (50-70%) than the old version without changing results. - In the U-233 and Pu-241 files of JENDL-3.3 an inconsistency between resonance parameters in MF=32 and those in MF=2 was corrected. NEA-1676/06: This version differs from the previous one (NEA-1676/05) in the following: ERRORJ2.2.1 was modified to treat the self-shielding effect accurately. NEA-1676/07: This version

Scapulothoracic Anatomy and Snapping Scapula Syndrome

Directory of Open Access Journals (Sweden)

Rachel M. Frank

2013-01-01

Full Text Available The scapulothoracic articulation is a sliding junction between the deep aspect of the scapula and thoracic rib cage at the levels of ribs 2 through 7. Motion at this articulation is dynamically stabilized by a variety of muscular attachments, allowing for controlled positioning of the glenoid to assist in glenohumeral joint function. A thorough understanding of the complex anatomic relationships, including the various muscles, and bursa, is critical to the evaluation of patients presenting with scapulothoracic disorders. The snapping scapula syndrome is caused by either osseous lesions or scapulothoracic bursitis and can be difficult to recognize and treat. The purpose of this review is to discuss the anatomy of the scapulothoracic articulation with an emphasis on the pathology associated with snapping scapula syndrome.

Snapping shrimp sound production patterns on Caribbean coral reefs: relationships with celestial cycles and environmental variables

Science.gov (United States)

Lillis, Ashlee; Mooney, T. Aran

2018-06-01

The rich acoustic environment of coral reefs, including the sounds of a variety of fish and invertebrates, is a reflection of the structural complexity and biological diversity of these habitats. Emerging interest in applying passive acoustic monitoring and soundscape analysis to measure coral reef habitat characteristics and track ecological patterns is hindered by a poor understanding of the most common and abundant sound producers on reefs—the snapping shrimp. Here, we sought to address several basic biophysical drivers of reef sound by investigating acoustic activity patterns of snapping shrimp populations on two adjacent coral reefs using a detailed snap detection analysis routine to a high-resolution 2.5-month acoustic dataset from the US Virgin Islands. The reefs exhibited strong diel and lunar periodicity in snap rates and clear spatial differences in snapping levels. Snap rates peaked at dawn and dusk and were higher overall during daytime versus nighttime, a seldom-reported pattern in earlier descriptions of diel snapping shrimp acoustic activity. Small differences between the sites in snap rate rhythms were detected and illustrate how analyses of specific soundscape elements might reveal subtle between-reef variation. Snap rates were highly correlated with environmental variables, including water temperature and light, and were found to be sensitive to changes in oceanographic forcing. This study further establishes snapping shrimp as key players in the coral reef chorus and provides evidence that their acoustic output reflects a combination of environmental conditions, celestial influences, and spatial habitat variation. Effective application of passive acoustic monitoring in coral reef habitats using snap rates or snapping-influenced acoustic metrics will require a mechanistic understanding of the underlying spatial and temporal variation in snapping shrimp sound production across multiple scales.

Multigroup P8 - elastic scattering matrices of main reactor elements

International Nuclear Information System (INIS)

Garg, S.B.; Shukla, V.K.

1979-01-01

To study the effect of anisotropic scattering phenomenon on shielding and neutronics of nuclear reactors multigroup P8-elastic scattering matrices have been generated for H, D, He, 6 Li, 7 Li, 10 B, C, N, O, Na, Cr, Fe, Ni, 233 U, 235 U, 238 U, 239 Pu, 240 Pu, 241 Pu and 242 Pu using their angular distribution, Legendre coefficient and elastic scattering cross-section data from the basic ENDF/B library. Two computer codes HSCAT and TRANS have been developed to complete this task for BESM-6 and CDC-3600 computers. These scattering matrices can be directly used as input to the transport theory codes ANISN and DOT. (auth.)

Time-step selection considerations in the analysis of reactor transients with DIF3D-K

International Nuclear Information System (INIS)

Taiwo, T.A.; Khalil, H.S.; Cahalan, J.E.; Morris, E.E.

1993-01-01

The DIF3D-K code solves the three-dimensional, time-dependent multigroup neutron diffusion equations by using a nodal approach for spatial discretization and either the theta method or one of three space-time factorization approaches for temporal integration of the nodal equations. The three space-time factorization options (namely, improved quasistatic, adiabatic and conventional point kinetics) were implemented because of their potential efficiency advantage for the analysis of transients in which the flux shape changes more slowly than its amplitude. Here we describe the implementation of DIF3D-K as the neutronics module within the SAS-HWR accident analysis code. We also describe the neutronics-related time step selection algorithms and their influence on the accuracy and efficiency of the various solution options

Nuclear data and multigroup methods in fast reactor calculations

International Nuclear Information System (INIS)

Gur, Y.

1975-03-01

The work deals with fast reactor multigroup calculations, and the efficient treatment of basic nuclear data, which serves as raw material for the calculations. Its purpose is twofold: to build a computer code system that handles a large, detailed library of basic neutron cross section data, (such as ENDF/B-III) and yields a compact set of multigroup cross sections for reactor calculations; to use the code system for comparative analysis of different libraries, in order to discover basic uncertainties that still exist in the measurement of neutron cross sections, and to determine their influence upon uncertainties in nuclear calculations. A program named NANICK which was written in two versions is presented. The first handles the American basic data library, ENDF/B-III, while the second handles the German basic data library, KEDAK. The mathematical algorithm is identical in both versions, and only the file management is different. This program calculates infinitely diluted multigroup cross sections and scattering matrices. It is complemented by the program NASIF that calculates shielding factors from resonance parameters. Different versions of NASIF were written to handle ENDF/B-III or KEDAK. New methods for evaluating in reactor calculations the long term behavior of the neutron flux as well as its fine structure are described and an efficient calculation of the shielding factors from resonance parameters is offered. (B.G.)

An ancient duplication of exon 5 in the Snap25 gene is required for complex neuronal development/function.

Directory of Open Access Journals (Sweden)

Jenny U Johansson

2008-11-01

Full Text Available Alternative splicing is an evolutionary innovation to create functionally diverse proteins from a limited number of genes. SNAP-25 plays a central role in neuroexocytosis by bridging synaptic vesicles to the plasma membrane during regulated exocytosis. The SNAP-25 polypeptide is encoded by a single copy gene, but in higher vertebrates a duplication of exon 5 has resulted in two mutually exclusive splice variants, SNAP-25a and SNAP-25b. To address a potential physiological difference between the two SNAP-25 proteins, we generated gene targeted SNAP-25b deficient mouse mutants by replacing the SNAP-25b specific exon with a second SNAP-25a equivalent. Elimination of SNAP-25b expression resulted in developmental defects, spontaneous seizures, and impaired short-term synaptic plasticity. In adult mutants, morphological changes in hippocampus and drastically altered neuropeptide expression were accompanied by severe impairment of spatial learning. We conclude that the ancient exon duplication in the Snap25 gene provides additional SNAP-25-function required for complex neuronal processes in higher eukaryotes.

The destructive effect of botulinum neurotoxins on the SNARE protein: SNAP-25 and synaptic membrane fusion

Directory of Open Access Journals (Sweden)

Bin Lu

2015-06-01

Full Text Available Synaptic exocytosis requires the assembly of syntaxin 1A and SNAP-25 on the plasma membrane and synaptobrevin 2 (VAMP2 on the vesicular membrane to bridge the two opposite membranes. It is believed that the three SNARE proteins assemble in steps along the dynamic assembly pathway. The C-terminus of SNAP-25 is known to be the target of botulinum neurotoxins (BoNT/A and BoNT/E that block neurotransmitters release in vivo. In this study, we employed electron paramagnetic resonance (EPR spectroscopy to investigate the conformation of the SNAP-25 C-terminus in binary and ternary SNARE complexes. The fluorescence lipid mixing assay shows that the C-terminal of SNAP-25 is essential for membrane fusion, and that the truncated SNAP-25 mutants cleaved by BoNT/A and BoNT/E display different inhibition effects on membrane fusion: SNAP-25E (Δ26 abolishes the fusion activity of the SNARE complex, while SNAP-25A (Δ9 loses most of its function, although it can still form a SDS-resistant SNARE complex as the wild-type SNAP-25. CW-EPR spectra validate the unstable structures of the SNARE complex formed by SNAP-25 mutants. We propose that the truncated SNAP-25 mutants will disrupt the assembly of the SNARE core complex, and then inhibit the synaptic membrane fusion accordingly.

SnapShot: The Bacterial Cytoskeleton.

Science.gov (United States)

Fink, Gero; Szewczak-Harris, Andrzej; Löwe, Jan

2016-07-14

Most bacteria and archaea contain filamentous proteins and filament systems that are collectively known as the bacterial cytoskeleton, though not all of them are cytoskeletal, affect cell shape, or maintain intracellular organization. To view this SnapShot, open or download the PDF. Copyright © 2016. Published by Elsevier Inc.

Snaps to Connect Coaxial and Microstrip Lines in Wearable Systems

Directory of Open Access Journals (Sweden)

Tiiti Kellomäki

2012-01-01

Full Text Available Commercial snaps (clothing fasteners can be used to connect a coaxial cable to a microstrip line. This is useful in the context of wearable antennas, especially in consumer applications and disposable connections. The measured S-parameters of the transition are presented, and an equivalent circuit and approximate equations are derived for system design purposes. The proposed connection is usable up to 1.5 GHz (10 dB return loss condition, and the frequency range can be extended to 2 GHz if a thinner, more flexible coaxial cable is used.

α-SNAP prevents docking of the acrosome during sperm exocytosis because it sequesters monomeric syntaxin.

Directory of Open Access Journals (Sweden)

Facundo Rodríguez

Full Text Available α-SNAP has an essential role in membrane fusion that consists of bridging cis SNARE complexes to NSF. α-SNAP stimulates NSF, which releases itself, α-SNAP, and individual SNAREs that subsequently re-engage in the trans arrays indispensable for fusion. α-SNAP also binds monomeric syntaxin and NSF disengages the α-SNAP/syntaxin dimer. Here, we examine why recombinant α-SNAP blocks secretion in permeabilized human sperm despite the fact that the endogenous protein is essential for membrane fusion. The only mammalian organism with a genetically modified α-SNAP is the hyh mouse strain, which bears a M105I point mutation; males are subfertile due to defective sperm exocytosis. We report here that recombinant α-SNAP-M105I has greater affinity for the cytosolic portion of immunoprecipitated syntaxin than the wild type protein and in consequence NSF is less efficient in releasing the mutant. α-SNAP-M105I is a more potent sperm exocytosis blocker than the wild type and requires higher concentrations of NSF to rescue its effect. Unlike other fusion scenarios where SNAREs are subjected to an assembly/disassembly cycle, the fusion machinery in sperm is tuned so that SNAREs progress uni-directionally from a cis configuration in resting cells to monomeric and subsequently trans arrays in cells challenged with exocytosis inducers. By means of functional and indirect immunofluorescense assays, we show that recombinant α-SNAPs--wild type and M105I--inhibit exocytosis because they bind monomeric syntaxin and prevent this SNARE from assembling with its cognates in trans. Sequestration of free syntaxin impedes docking of the acrosome to the plasma membrane assessed by transmission electron microscopy. The N-terminal deletion mutant α-SNAP-(160-295, unable to bind syntaxin, affects neither docking nor secretion. The implications of this study are twofold: our findings explain the fertility defect of hyh mice and indicate that assembly of SNAREs in trans

SNAP: a tool for nuclear physical protection system modeling

International Nuclear Information System (INIS)

Engi, D.; Grant, F.H. III.

1979-10-01

Nuclear safeguards systems are concerned, in part, with the physical protection of nuclear materials. The function of a physical protection system is to define the facility against adversary activities which could lead to theft of nuclear material or sabotage resulting in a radiological release. The Safeguards Network Analysis Procedure (SNAP) provides a convenient and standard analysis methodology for the evaluation of physical protection system analysis. This paper describes a detailed application of SNAP to a hypothetical nuclear facility

Telling our stories: heroin-assisted treatment and SNAP activism in the Downtown Eastside of Vancouver.

Science.gov (United States)

Boyd, Susan; Murray, Dave; MacPherson, Donald

2017-05-18

This article highlights the experiences of a peer-run group, SALOME/NAOMI Association of Patients (SNAP), that meets weekly in the Downtown Eastside of Vancouver, British Columbia, Canada. SNAP is a unique independent peer- run drug user group that formed in 2011 following Canada's first heroin-assisted treatment trial (HAT), North America Opiate Medication Initiative (NAOMI). SNAP's members are now made up of former research participants who participated in two heroin-assisted trials in Vancouver. This article highlights SNAP members' experiences as research subjects in Canada's second clinical trial conducted in Vancouver, Study to Assess Longer-term Opioid Medication Effectiveness (SALOME), that began recruitment of research participants in 2011. This paper draws on one brainstorming session, three focus groups, and field notes, with the SALOME/NAOMI Association of Patients (SNAP) in late 2013 about their experiences as research subjects in Canada's second clinical trial, SALOME in the DTES of Vancouver, and fieldwork from a 6-year period (March 2011 to February 2017) with SNAP members. SNAP's research draws on research principles developed by drug user groups and critical methodological frameworks on community-based research for social justice. The results illuminate how participating in the SALOME clinical trial impacted the lives of SNAP members. In addition, the findings reveal how SNAP member's advocacy for HAT impacts the group in positive ways. Seven major themes emerged from the analysis of the brainstorming and focus groups: life prior to SALOME, the clinic setting and routine, stability, 6-month transition, support, exiting the trial and ethics, and collective action, including their participation in a constitutional challenge in the Supreme Court of BC to continue receiving HAT once the SALOME trial ended. HAT benefits SNAP members. They argue that permanent HAT programs should be established in Canada because they are an effective harm reduction

Snap-top nanocarriers

KAUST Repository

Ambrogio, Michael W.

2010-08-06

(Equation Presented). An approach to the design and fabrication of mechanized mesoporous silica nanoparticles is demonstrated at the proof of principle level. It relies on the reductive cleavage of disulfide bonds within an integrated nanosystem, wherein surface-bound rotaxanes incorporate disulfide bonds in their stalks,-which are encircled by cucurbit[6]uril or α-cyclodextrin rings, until reductive chemistry is performed, resulting in the snapping of the stalks of the rotaxanes, leading to cargo release from the inside of the nanoparticles. © 2010 American Chemical Society.

Snap-top nanocarriers

KAUST Repository

Ambrogio, Michael W.; Pecorelli, Travis A.; Patel, Kaushik I.; Khashab, Niveen M.; Trabolsi, Ali; Khatib, Hussam A.; Botros, Youssry Y.; Zink, Jeffrey I.; Stoddart, Fraser Fraser Raser

2010-01-01

(Equation Presented). An approach to the design and fabrication of mechanized mesoporous silica nanoparticles is demonstrated at the proof of principle level. It relies on the reductive cleavage of disulfide bonds within an integrated nanosystem, wherein surface-bound rotaxanes incorporate disulfide bonds in their stalks,-which are encircled by cucurbit[6]uril or α-cyclodextrin rings, until reductive chemistry is performed, resulting in the snapping of the stalks of the rotaxanes, leading to cargo release from the inside of the nanoparticles. © 2010 American Chemical Society.

Vortex formation with a snapping shrimp claw.

Science.gov (United States)

Hess, David; Brücker, Christoph; Hegner, Franziska; Balmert, Alexander; Bleckmann, Horst

2013-01-01

Snapping shrimp use one oversized claw to generate a cavitating high speed water jet for hunting, defence and communication. This work is an experimental investigation about the jet generation. Snapping shrimp (Alpheus-bellulus) were investigated by using an enlarged transparent model reproducing the closure of the snapper claw. Flow inside the model was studied using both High-Speed Particle Image Velocimetry (HS-PIV) and flow visualization. During claw closure a channel-like cavity was formed between the plunger and the socket featuring a nozzle-type contour at the orifice. Closing the mechanism led to the formation of a leading vortex ring with a dimensionless formation number of approximate ΔT*≈4. This indicates that the claw might work at maximum efficiency, i.e. maximum vortex strength was achieved by a minimum of fluid volume ejected. The subsequent vortex cavitation with the formation of an axial reentrant jet is a reasonable explanation for the large penetration depth of the water jet. That snapping shrimp can reach with their claw-induced flow. Within such a cavitation process, an axial reentrant jet is generated in the hollow cylindrical core of the cavitated vortex that pushes the front further downstream and whose length can exceed the initial jet penetration depth by several times.

Vortex formation with a snapping shrimp claw.

Directory of Open Access Journals (Sweden)

David Hess

Full Text Available Snapping shrimp use one oversized claw to generate a cavitating high speed water jet for hunting, defence and communication. This work is an experimental investigation about the jet generation. Snapping shrimp (Alpheus-bellulus were investigated by using an enlarged transparent model reproducing the closure of the snapper claw. Flow inside the model was studied using both High-Speed Particle Image Velocimetry (HS-PIV and flow visualization. During claw closure a channel-like cavity was formed between the plunger and the socket featuring a nozzle-type contour at the orifice. Closing the mechanism led to the formation of a leading vortex ring with a dimensionless formation number of approximate ΔT*≈4. This indicates that the claw might work at maximum efficiency, i.e. maximum vortex strength was achieved by a minimum of fluid volume ejected. The subsequent vortex cavitation with the formation of an axial reentrant jet is a reasonable explanation for the large penetration depth of the water jet. That snapping shrimp can reach with their claw-induced flow. Within such a cavitation process, an axial reentrant jet is generated in the hollow cylindrical core of the cavitated vortex that pushes the front further downstream and whose length can exceed the initial jet penetration depth by several times.

Identification and Characterization of Botulinum Neurotoxin A Substrate Binding Pockets and Their Re-Engineering for Human SNAP-23.

Science.gov (United States)

Sikorra, Stefan; Litschko, Christa; Müller, Carina; Thiel, Nadine; Galli, Thierry; Eichner, Timo; Binz, Thomas

2016-01-29

Botulinum neurotoxins (BoNTs) are highly potent bacterial proteins that block neurotransmitter release at the neuromuscular junction by cleaving SNAREs (soluble N-ethyl maleimide sensitive factor attachment protein receptors). However, their serotype A (BoNT/A) that cleaves SNAP-25 (synaptosomal-associated protein of 25 kDa) has also been an established pharmaceutical for treatment of medical conditions that rely on hyperactivity of cholinergic nerve terminals for 25 years. The expansion of its use to a variety of further medical conditions associated with hypersecretion components is prevented partly because the involved SNARE isoforms are not cleaved. Therefore, we examined by mutational analyses the reason for the resistance of human SNAP-23, an isoform of SNAP-25. We show that replacement of 10 SNAP-23 residues with their SNAP-25 counterparts effects SNAP-25-like cleavability. Conversely, transfer of each of the replaced SNAP-23 residues to SNAP-25 drastically decreased the cleavability of SNAP-25. By means of the existing SNAP-25-toxin co-crystal structure, molecular dynamics simulations, and corroborative mutagenesis studies, the appropriate binding pockets for these residues in BoNT/A were characterized. Systematic mutagenesis of two major BoNT/A binding pockets was conducted in order to adapt these pockets to corresponding amino acids of human SNAP-23. Human SNAP-23 cleaving mutants were isolated using a newly established yeast-based screening system. This method may be useful for engineering novel BoNT/A pharmaceuticals for the treatment of diseases that rely on SNAP-23-mediated hypersecretion. Copyright © 2015 Elsevier Ltd. All rights reserved.

Calculation of multigroup constants in WIMS format with programs fedgroup and flange and comparison of the results obtained using different evaluated libraries

International Nuclear Information System (INIS)

Trkov, A.; Budnar, M.; Copic, M.; Perdan, A.; Ravnik, M.

1982-01-01

Multigroup constants for 1-H-1, 92-U-235, and 92-U-238 have been calculated. Averaged cross-sections and other constants have been prepared in the WIMS 69-group format. Comparison has been made between group constants obtained with several evaluated libraries (KEDAK-3 1975, 1979, ENDF/B-4, ENDF/B-5) and the WIMS-D library. Observed differences are most pronounced in the resonance and fast region. From test runs on fuel cell with the WIMS program it can be deduced that these differences affect the fewgroup constants significantly. (author)

Space synthesis: an application of synthesis method to two and three dimensional multigroup neutron diffusion equations; Synthese spatiale: une application de la methode de synthese aux equations de diffusion neutronique multigroupe a deux et trois dimensions

Energy Technology Data Exchange (ETDEWEB)

Nguyen-Ngoc, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

In order to reduce computing time, two and three-dimensional multigroup neutron diffusion equations in cylindrical, rectangular (X, Y), (X, Y, Z) and hexagonal geometries are solved by the method of synthesis using an appropriate variational principle (stationary principle). The basic idea is to reduce the number of independent variables by constructing two or three-dimensional solutions from solutions of fewer variables, hence the name 'synthesis method'. Whatever the geometry, we are led to solve a system of ordinary differential equations with matrix coefficients to which one can apply well-known numerical methods: CHEBYSHEV's polynomial method, Gaussian elimination. Numerical results furnished by synthesis programs written for the IBM 7094, the IBM 360-75 and the CDC 6600 computers, are confronted with those which are given by programs employing the classical finite difference method. [French] En vue de reduire le-temps de calcul, les equations de diffusion neutronique, multigroupe, a deux et trois dimensions d'espace dans les geometries cylindrique, rectangulaire (X, Y), (X, Y, Z) et hexagonale sont resolues par la methode de synthese utilisant un principe variationnel approprie (principe stationnaire). L'idee consiste a reduire le nombre de variables independantes par construction d'une solution bi ou tridimensionnelle au moyen de solutions dependant d'un nombre inferieur de variables, d'ou le nom de la methode. Dans tous les cas de geometrie, nous sommes conduits a resoudre un systeme d'equations differentielles a coefficients matriciels auquel peuvent s'appliquer les methodes numeriques courantes; methode polynomiale de TCHEBYCHEFF et methode d'elimination de GAUSS. Les resultats numeriques obtenus par nos codes de synthese programmes sur IBM 7094, IBM 360-75 et CDC 6600, sont confrontes avec ceux que fournissent les programmes adoptant la methode classique des differences finies. (auteur)

Multigroup neutron transport equation in the diffusion and P{sub 1} approximation

Energy Technology Data Exchange (ETDEWEB)

Obradovic, D [Boris Kidric Institute of nuclear sciences Vinca, Belgrade (Yugoslavia)

1970-07-01

Investigations of the properties of the multigroup transport operator, width and without delayed neutrons in the diffusion and P{sub 1} approximation, is performed using Keldis's theory of operator families as well as a technique . recently used for investigations into the properties of the general linearized Boltzmann operator. It is shown that in the case without delayed neutrons, multigroup transport operator in the diffusion and P{sub 1} approximation possesses a complete set of generalized eigenvectors. A formal solution to the initial value problem is also given. (author)

Lipid droplets interact with mitochondria using SNAP23

DEFF Research Database (Denmark)

Jägerström, Sara; Polesie, Sam; Wickström, Ylva

2009-01-01

peroxisomes and the endoplasmic reticulum. We have used electron and confocal microscopy to demonstrate that LD form complexes with mitochondria in NIH 3T3 fibroblasts. Using an in vitro system of purified LD and mitochondria, we also show the formation of the LD-mitochondria complex, in which cytosolic...... factors are involved. Moreover, the presence of LD markers in mitochondria isolated by subcellular fractionations is demonstrated. Finally, ablation of SNAP23 using siRNA reduced complex formation and beta oxidation, which suggests that the LD-mitochondria complex is functional in the cell....

Snap Down Voltage of a Fast-Scanning Micromirror with Vertical Electrostatic Combdrives

Science.gov (United States)

Wada, Hiroyuki; Lee, Daesung; Zappe, Stefan; Krishnamoorthy, Uma; Solgaard, Olav

2004-02-01

The parallel transition mode of the snap down of a fast-scanning mirror with vertical combdrives was analyzed. The snap down voltage of such a mirror significantly decreased when offsets between the ideal and actual upper movable comb teeth were more than 0.1 μm. When gap between the upper and lower comb teeth was decreased to increase torque, snap down voltage significantly decreased. The largest offset is induced by the lithography step in the fabrication process of the mirror. Self-alignment is required to increase the resonant frequency of the scanning mirror.

Complex of two-dimensional multigroup programs for neutron-physical computations of nuclear reactor

International Nuclear Information System (INIS)

Karpov, V.A.; Protsenko, A.N.

1975-01-01

Briefly stated mathematical aspects of the two-dimensional multigroup method of neutron-physical computation of nuclear reactor. Problems of algorithmization and BESM-6 computer realisation of multigroup diffuse approximations in hexagonal and rectangular calculated lattices are analysed. The results of computation of fast critical assembly having complicated composition of the core are given. The estimation of computation accuracy of criticality, neutron fields distribution and efficiency of absorbing rods by means of computer programs developed is done. (author)

Time-step selection considerations in the analysis of reactor transients with DIF3D-K

International Nuclear Information System (INIS)

Taiwo, T.A.; Khalil, H.S.; Cahalan, J.E.; Morris, E.E.

1993-01-01

The DIF3D-K code solves the three-dimensional, time-dependent multigroup neutron diffusion equations by using a nodal approach for spatial discretization and either the theta method or one of three space-time factorization approaches for temporal integration of the nodal equations. The three space-time factorization options (namely, improved quasistatic, adiabatic, and conventional point kinetics) were implemented because of their potential efficiency advantage for the analysis of transients in which the flux shape changes more slowly than its amplitude. In this paper, we describe the implementation of DIF3D-K as the neutronics module within the SAS-HWR accident analysis code. We also describe the neuronic-related time-step selection algorithms and their influence on the accuracy and efficiency of the various solution options

Development and testing of multigroup library with correction of self-shielding effects in fusion-fission hybrid reactor

International Nuclear Information System (INIS)

Zou Jun; He Zhaozhong; Zeng Qin; Qiu Yuefeng; Wang Minghuang

2010-01-01

A multigroup library HENDL2.1/SS (Hybrid Evaluated Nuclear Data Library/Self-Shielding) based on ENDF/B-VII.0 evaluate data has been generated using Bondarenko and flux calculator method for the correction of self-shielding effect of neutronics analyses. To validate the reliability of the multigroup library HENDL2.1/SS, transport calculations for fusion-fission hybrid system FDS-I were performed in this paper. It was verified that the calculations with the HENDL2.1/SS gave almost the same results with MCNP calculations and were better than calculations with the HENDL2.0/MG which is another multigroup library without self-shielding correction. The test results also showed that neglecting resonance self-shielding caused underestimation of the K eff , neutron fluxes and waste transmutation ratios in the multigroup calculations of FDS-I.

Effect of temporary drought at different growth stages on snap bean ...

African Journals Online (AJOL)

High quality snap bean (Phaseolus vulgaris L.) can be produced under rain-fed conditions, provided that adequate moisture is available. However, drought may occur at any stage of growth of snap bean. The objective of this study was to evaluate the effect of drought stress at different growth stages on pod physical quality ...

FEMSYN - a code system to solve multigroup diffusion theory equations using a variety of solution techniques. Part 4 : SYNTHD - The synthesis module

International Nuclear Information System (INIS)

Jagannathan, V.

1985-01-01

For solving the multigroup diffusion theory equations in 3-D problems in which the material properties are uniform in large segments of axial direction, the synthesis method is known to give fairly accurate results, at very low computational cost. In the code system FEMSYN, the single channel continuous flux synthesis option has been incorporated. One can generate the radial trail functions by either finite difference method (FDM) or finite element method (FEM). The axial mixing functions can also be found by either FDM or FEM. Use of FEM for both radial and axial directions is found to reduce the calculation time considerably. One can determine eigenvalue, 3-D flux and power distributions with FEMSYN. In this report, a detailed discription of the synthesis module SYNTHD is given. (author)

Experimental Snap Loading of Synthetic Ropes

Directory of Open Access Journals (Sweden)

C.M. Hennessey

2005-01-01

Full Text Available Large tensile forces, known as snap loads, can occur when a slack rope becomes taut. Such forces may damage the rope or masses connected to it. Experiments are described in which one end of a rope is attached to the top of a drop tower and the bottom end is attached to a weight. The weight is raised to a certain height and then released. The force at the top of the rope and the acceleration of the weight are recorded during the first snap load that occurs. Repeated drop tests are performed on each rope. The effects of the type of rope, drop height, drop weight, whether the rope has been subjected to static precycling, and the number of previous dynamic tests are examined. A mathematical model is proposed for the rope force as a function of the displacement and velocity of the weight.

TASK, 1-D Multigroup Diffusion or Transport Theory Reactor Kinetics with Delayed Neutron

International Nuclear Information System (INIS)

Buhl, A.R.; Hermann, O.W.; Hinton, R.J.; Dodds, H.L. Jr.; Robinson, J.C.; Lillie, R.A.

1975-01-01

1 - Description of problem or function: TASK solves the one-dimensional multigroup form of the reactor kinetics equations, using either transport or diffusion theory and allowing an arbitrary number of delayed neutron groups. The program can also be used to solve standard static problems efficiently such as eigenvalue problems, distributed source problems, and boundary source problems. Convergence problems associated with sources in highly multiplicative media are circumvented, and such problems are readily calculable. 2 - Method of solution: TASK employs a combination scattering and transfer matrix method to eliminate certain difficulties that arise in classical finite difference approximations. As such, within-group (inner) iterations are eliminated and solution convergence is independent of spatial mesh size. The time variable is removed by Laplace transformation. (A later version will permit direct time solutions.) The code can be run either in an outer iteration mode or in closed (non-iterative) form. The running mode is dictated by the number of groups times the number of angles, consistent with available storage. 3 - Restrictions on the complexity of the problem: The principal restrictions are available storage and computation time. Since the code is flexibly-dimensioned and has an outer iteration option there are no internal restrictions on group structure, quadrature, and number of ordinates. The flexible-dimensioning scheme allows optional use of core storage. The generalized cylindrical geometry option is not complete in Version I of the code. The feedback options and omega-mode search options are not included in Version I

Reference calculations on critical assemblies with Apollo2 code working with a fine multigroup mesh

International Nuclear Information System (INIS)

Aggery, A.

1999-12-01

The objective of this thesis is to add to the multigroup transport code APOLLO2 the capability to perform deterministic reference calculations, for any type of reactor, using a very fine energy mesh of several thousand groups. This new reference tool allows us to validate the self-shielding model used in industrial applications, to perform depletion calculations, differential effects calculations, critical buckling calculations or to evaluate precisely data required by the self shielding model. At its origin, APOLLO2 was designed to perform routine calculations with energy meshes around one hundred groups. That is why, in the current format of cross sections libraries, almost each value of the multigroup energy transfer matrix is stored. As this format is not convenient for a high number of groups (concerning memory size), we had to search out a new format for removal matrices and consequently to modify the code. In the new format we found, only some values of removal matrices are kept (these values depend on a reconstruction precision choice), the other ones being reconstructed by a linear interpolation, what reduces the size of these matrices. Then we had to show that APOLLO2 working with a fine multigroup mesh had the capability to perform reference calculations on any assembly geometry. For that, we successfully carried out the validation with several calculations for which we compared APOLLO2 results (obtained with the universal mesh of 11276 groups) to results obtained with Monte Carlo codes (MCNP, TRIPOLI4). Physical analysis led with this new tool have been very fruitful and show a great potential for such an R and D tool. (author)

REX1-87, Multigroup Neutron Cross-Sections from ENDF/B

International Nuclear Information System (INIS)

Gopalakrishnan, V.; Ganesan, S.

1988-01-01

1 - Description of program or function: The program calculates self- shielding factors for reactor applications from a pre-processed (linearized) evaluated nuclear data file in the ENDF/B format. 2 - Method of solution: Bondarenko definition of multigroup self- shielding factors invoking narrow resonance treatment is used. 3 - Restrictions on the complexity of the problem: a) Maximum no. of energy group is 620. b) Only the built-in forms of the weighting functions can be chosen. c) The program is strictly limited to resolved resonance region from physical considerations

Droplet snap-off in fluids with nematic liquid crystalline ordering

International Nuclear Information System (INIS)

Verhoeff, A A; Lekkerkerker, H N W

2012-01-01

We studied the snap-off of nematic liquid crystalline droplets originating from the Rayleigh-Taylor instability at the isotropic-nematic interface in suspensions of charged gibbsite in water and sterically stabilized gibbsite in bromotoluene. We found that droplet snap-off strongly depends on the director field structure inside the thinning neck, which is determined by the ratio of the splay elastic constant and the anchoring strength of the nematic phase to the droplet interface relative to the thickness of the thinning neck. If anchoring is weak, which is the case for aqueous gibbsite, this ratio is comparable to the thickness of the breaking thread. As a result, the thinning neck and pending drop have a uniform director field and droplet snap-off is determined by the viscous properties of the liquid crystal as well as by thermal fluctuations of the interface. On the other hand, in sterically stabilized gibbsite where anchoring is strong, this ratio is significantly smaller than the neck thickness. In this case, the neck has an escaped radial director field and the neck thinning is retarded close to snap-off due to a topological energy barrier involved in the separation of the droplet from the thread. (paper)

Preparing diagnostic data for the SNAP transport code

International Nuclear Information System (INIS)

Murphy, J.A.; Scott, S.D.; Towner, H.H.

1992-01-01

This paper describes the program SNAPIN which is used to prepare data for transport analysis with the SNAP code. The data input to SNAP includes diagnostic profiles [n e (R), T e (R), T i (R), v φ (R), Z eff (R), P rad (R)] and measurements such as total plasma current, R major , beam power, gas puff rate, etc. SNAPIN reads in the necessary TFTR data, allows editing of that data, including graphical editing of profile data and the selection of physics models. SNAPIN allows comparison of profile data from all diagnostics that measure a quantity, for example, electron temperature profiles from Thomson scattering and electron cyclotron emission (ECE). A powerful user interface is important to help the user prepare input data sets quickly and consistently, because hundreds of variables must be specified for each analysis. SNAPIN facilitates this by a careful organization of menus, display of all scalar data and switch settings within the menus, the graphical editing and comparison of profiles, and step-by-step checking for consistent physics controls [J. Murphy, S. Scott, and H. Towner, The SNAP User's Guide, Technical Report PPPL-TM-393, Princeton Plasma Physics Laboratory (1992)

SNAP and AI Fuel Summary Report

International Nuclear Information System (INIS)

Lords, R.E.

1994-08-01

The SNAP and AI Fuel Summary Report provides a detailed overview of treatment and storage of these fuels from fabrication through current storage including design parameters and reactor history. Chemical and physical characteristics are described, and potential indicators of as-stored fuel conditions are emphasized

A single amino acid mutation in SNAP-25 induces anxiety-related behavior in mouse.

Directory of Open Access Journals (Sweden)

Masakazu Kataoka

Full Text Available Synaptosomal-associated protein of 25 kDa (SNAP-25 is a presynaptic protein essential for neurotransmitter release. Previously, we demonstrate that protein kinase C (PKC phosphorylates Ser(187 of SNAP-25, and enhances neurotransmitter release by recruiting secretory vesicles near to the plasma membrane. As PKC is abundant in the brain and SNAP-25 is essential for synaptic transmission, SNAP-25 phosphorylation is likely to play a crucial role in the central nervous system. We therefore generated a mutant mouse, substituting Ser(187 of SNAP-25 with Ala using "knock-in" technology. The most striking effect of the mutation was observed in their behavior. The homozygous mutant mice froze readily in response to environmental change, and showed strong anxiety-related behavior in general activity and light and dark preference tests. In addition, the mutant mice sometimes exhibited spontaneously occurring convulsive seizures. Microdialysis measurements revealed that serotonin and dopamine release were markedly reduced in amygdala. These results clearly indicate that PKC-dependent SNAP-25 phosphorylation plays a critical role in the regulation of emotional behavior as well as the suppression of epileptic seizures, and the lack of enhancement of monoamine release is one of the possible mechanisms underlying these defects.

Scapulothoracic bursitis and snapping scapula syndrome: a critical review of current evidence.

Science.gov (United States)

Warth, Ryan J; Spiegl, Ulrich J; Millett, Peter J

2015-01-01

Symptomatic scapulothoracic disorders, such as painful scapular crepitus and/or bursitis, are uncommon; however, they can produce significant pain and disability in many patients. To review the current knowledge pertaining to snapping scapula syndrome and to identify areas of further research that may be helpful to improve clinical outcomes and patient satisfaction. Systematic review. We performed a preliminary search of the PubMed and Embase databases using the search terms "snapping scapula," "scapulothoracic bursitis," "partial scapulectomy," and "superomedial angle resection" in September 2013. All nonreview articles related to the topic of snapping scapula syndrome were included. The search identified a total of 167 unique articles, 81 of which were relevant to the topic of snapping scapula syndrome. There were 36 case series of fewer than 10 patients, 16 technique papers, 11 imaging studies, 9 anatomic studies, and 9 level IV outcomes studies. The level of evidence obtained from this literature search was inadequate to perform a formal systematic review or meta-analysis. Therefore, a critical review of current evidence is presented. Snapping scapula syndrome, a likely underdiagnosed condition, can produce significant shoulder dysfunction in many patients. Because the precise origin is typically unknown, specific treatments that are effective for some patients may not be effective for others. Nevertheless, bursectomy with or without partial scapulectomy is currently the most effective primary method of treatment in patients who fail nonoperative therapy. However, many patients experience continued shoulder disability even after surgical intervention. Future studies should focus on identifying the modifiable factors associated with poor outcomes after operative and nonoperative management for snapping scapula syndrome in an effort to improve clinical outcomes and patient satisfaction. © 2014 The Author(s).

Snap: an integrated SNP annotation platform

DEFF Research Database (Denmark)

Li, Shengting; Ma, Lijia; Li, Heng

2007-01-01

Snap (Single Nucleotide Polymorphism Annotation Platform) is a server designed to comprehensively analyze single genes and relationships between genes basing on SNPs in the human genome. The aim of the platform is to facilitate the study of SNP finding and analysis within the framework of medical...

MC2-2, Calculation of Fast Neutron Spectra and Multigroup Cross-Sections from ENDF/B Data

International Nuclear Information System (INIS)

2001-01-01

. Extreme flexibility is provided in specifying the rigor of a calculation including a choice of four distinct slowing-down treatments: multigroup, improved and standard Greuling-Goertzel continuous slowing-down, and integral transport theory. All binary data transfers are localized in CCCC standard subroutines REED/RITE. Broad group cross-section files may be generated in the ARC System XS.ISO (Ref. 7) and CCCC ISOTXS (Ref. 9) formats. 3 - Restrictions on the complexity of the problem: The program uses variable dimensioning throughout so that computer storage requirements depend on a variety of problem parameters. Space requirements are approximately 2000 K bytes on RS6000 or SUN equipment depending on the complexity of the problem

Synaptotagmin-7 is an asynchronous calcium sensor for synaptic transmission in neurons expressing SNAP-23.

Directory of Open Access Journals (Sweden)

Jens P Weber

Full Text Available Synchronization of neurotransmitter release with the presynaptic action potential is essential for maintaining fidelity of information transfer in the central nervous system. However, synchronous release is frequently accompanied by an asynchronous release component that builds up during repetitive stimulation, and can even play a dominant role in some synapses. Here, we show that substitution of SNAP-23 for SNAP-25 in mouse autaptic glutamatergic hippocampal neurons results in asynchronous release and a higher frequency of spontaneous release events (mEPSCs. Use of neurons from double-knock-out (SNAP-25, synaptotagmin-7 mice in combination with viral transduction showed that SNAP-23-driven release is triggered by endogenous synaptotagmin-7. In the absence of synaptotagmin-7 release became even more asynchronous, and the spontaneous release rate increased even more, indicating that synaptotagmin-7 acts to synchronize release and suppress spontaneous release. However, compared to synaptotagmin-1, synaptotagmin-7 is a both leaky and asynchronous calcium sensor. In the presence of SNAP-25, consequences of the elimination of synaptotagmin-7 were small or absent, indicating that the protein pairs SNAP-25/synaptotagmin-1 and SNAP-23/synaptotagmin-7 might act as mutually exclusive calcium sensors. Expression of fusion proteins between pHluorin (pH-sensitive GFP and synaptotagmin-1 or -7 showed that vesicles that fuse using the SNAP-23/synaptotagmin-7 combination contained synaptotagmin-1, while synaptotagmin-7 barely displayed activity-dependent trafficking between vesicle and plasma membrane, implying that it acts as a plasma membrane calcium sensor. Overall, these findings support the idea of alternative syt∶SNARE combinations driving release with different kinetics and fidelity.

FINELM: a multigroup finite element diffusion code. Part II

International Nuclear Information System (INIS)

Davierwalla, D.M.

1981-05-01

The author presents the axisymmetric case in cylindrical coordinates for the finite element multigroup neutron diffusion code, FINELM. The numerical acceleration schemes incorporated viz. the Lebedev extrapolations and the coarse mesh rebalancing, space collapsing, are discussed. A few benchmark computations are presented as validation of the code. (Auth.)

Cassandre : a two-dimensional multigroup diffusion code for reactor transient analysis

International Nuclear Information System (INIS)

Arien, B.; Daniels, J.

1986-12-01

CASSANDRE is a two-dimensional (x-y or r-z) finite element neutronics code with thermohydraulics feedback for reactor dynamics prior to the disassembly phase. It uses the multigroup neutron diffusion theory. Its main characteristics are the use of a generalized quasistatic model, the use of a flexible multigroup point-kinetics algorithm allowing for spectral matching and the use of a finite element description. The code was conceived in order to be coupled with any thermohydraulics module, although thermohydraulics feedback is only considered in r-z geometry. In steady state criticality search is possible either by control rod insertion or by homogeneous poisoning of the coolant. This report describes the main characterstics of the code structure and provides all the information needed to use the code. (Author)

RZ calculations for self shielded multigroup cross sections

Energy Technology Data Exchange (ETDEWEB)

Li, M.; Sanchez, R.; Zmijarevic, I.; Stankovski, Z. [Commissariat a l' Energie Atomique CEA, Direction de l' Energie Nucleaire, DEN/DM2S/SERMA/LENR, 91191 Gif-sur-Yvette Cedex (France)

2006-07-01

A collision probability method has been implemented for RZ geometries. The method accounts for white albedo, specular and translation boundary condition on the top and bottom surfaces of the geometry and for a white albedo condition on the outer radial surface. We have applied the RZ CP method to the calculation of multigroup self shielded cross sections for Gadolinia absorbers in BWRs. (authors)

RZ calculations for self shielded multigroup cross sections

International Nuclear Information System (INIS)

Li, M.; Sanchez, R.; Zmijarevic, I.; Stankovski, Z.

2006-01-01

A collision probability method has been implemented for RZ geometries. The method accounts for white albedo, specular and translation boundary condition on the top and bottom surfaces of the geometry and for a white albedo condition on the outer radial surface. We have applied the RZ CP method to the calculation of multigroup self shielded cross sections for Gadolinia absorbers in BWRs. (authors)

Subcellular localization of proteins in the anaerobic sulfate reducer Desulfovibrio vulgaris via SNAP-tag labeling and photoconversion

Energy Technology Data Exchange (ETDEWEB)

Gorur, A.; Leung, C. M.; Jorgens, D.; Tauscher, A.; Remis, J. P.; Ball, D. A.; Chhabra, S.; Fok, V.; Geller, J. T.; Singer, M.; Hazen, T. C.; Juba, T.; Elias, D.; Wall, J.; Biggin, M.; Downing, K. H.; Auer, M.

2010-06-01

Systems Biology studies the temporal and spatial 3D distribution of macromolecular complexes with the aim that such knowledge will allow more accurate modeling of biological function and will allow mathematical prediction of cellular behavior. However, in order to accomplish accurate modeling precise knowledge of spatial 3D organization and distribution inside cells is necessary. And while a number of macromolecular complexes may be identified by its 3D structure and molecular characteristics alone, the overwhelming number of proteins will need to be localized using a reporter tag. GFP and its derivatives (XFPs) have been traditionally employed for subcelllar localization using photoconversion approaches, but this approach cannot be taken for obligate anaerobic bacteria, where the intolerance towards oxygen prevents XFP approaches. As part of the GTL-funded PCAP project (now ENIGMA) genetic tools have been developed for the anaerobe sulfate reducer Desulfovibrio vulgaris that allow the high-throughput generation of tagged-protein mutant strains, with a focus on the commercially available SNAP-tag cell system (New England Biolabs, Ipswich, MA), which is based on a modified O6-alkylguanine-DNA alkyltransferase (AGT) tag, that has a dead-end reaction with a modified O6-benzylguanine (BG) derivative and has been shown to function under anaerobic conditions. After initial challenges with respect to variability, robustness and specificity of the labeling signal we have optimized the labeling. Over the last year, as a result of the optimized labeling protocol, we now obtain robust labeling of 20 out of 31 SNAP strains. Labeling for 13 strains were confirmed at least five times. We have also successfully performed photoconversion on 5 of these 13 strains, with distinct labeling patterns for different strains. For example, DsrC robustly localizes to the periplasmic portion of the inner membrane, where as a DNA-binding protein localizes to the center of the cell, where the

Imaging software accuracy for 3-dimensional analysis of the upper airway.

Science.gov (United States)

Weissheimer, André; Menezes, Luciane Macedo de; Sameshima, Glenn T; Enciso, Reyes; Pham, John; Grauer, Dan

2012-12-01

The aim of this study was to compare the precision and accuracy of 6 imaging software programs for measuring upper airway volumes in cone-beam computed tomography data. The sample consisted of 33 growing patients and an oropharynx acrylic phantom, scanned with an i-CAT scanner (Imaging Sciences International, Hatfield, Pa). The known oropharynx acrylic phantom volume was used as the gold standard. Semi-automatic segmentations with interactive and fixed threshold protocols of the patients' oropharynx and oropharynx acrylic phantom were performed by using Mimics (Materialise, Leuven, Belgium), ITK-Snap (www.itksnap.org), OsiriX (Pixmeo, Geneva, Switzerland), Dolphin3D (Dolphin Imaging & Management Solutions, Chatsworth, Calif), InVivo Dental (Anatomage, San Jose, Calif), and Ondemand3D (CyberMed, Seoul, Korea) software programs. The intraclass correlation coefficient was used for the reliability tests. A repeated measurements analysis of variance (ANOVA) test and post-hoc tests (Bonferroni) were used to compare the software programs. The reliability was high for all programs. With the interactive threshold protocol, the oropharynx acrylic phantom segmentations with Mimics, Dolphin3D, OsiriX, and ITK-Snap showed less than 2% errors in volumes compared with the gold standard. Ondemand3D and InVivo Dental had more than 5% errors compared with the gold standard. With the fixed threshold protocol, the volume errors were similar (-11.1% to -11.7%) among the programs. In the oropharynx segmentation with the interactive protocol, ITK-Snap, Mimics, OsiriX, and Dolphin3D were statistically significantly different (P 0.05) was found between InVivo Dental and OnDemand3D. All 6 imaging software programs were reliable but had errors in the volume segmentations of the oropharynx. Mimics, Dolphin3D, ITK-Snap, and OsiriX were similar and more accurate than InVivo Dental and Ondemand3D for upper airway assessment. Copyright © 2012 American Association of Orthodontists. Published by

SNAP Participants' Eating Patterns over the Benefit Month: A Time Use Perspective.

Science.gov (United States)

Hamrick, Karen S; Andrews, Margaret

2016-01-01

Individuals receiving monthly benefits through the U.S. Supplemental Nutrition Assistance Program (SNAP) often fall short of food at the end of the month and some report feelings of hunger. To investigate this situation, we used time diaries from the 2006-08 American Time Use Survey and Eating & Health Module to identify the timing of days where respondents reported no eating occurrences. Analysis includes descriptive statistics, a logit model, and a simulated benefit month. We found that SNAP participants were increasingly more likely than nonparticipants to report a day with no eating occurrences over the benefit issuance cycle. This supports the view that there is a monthly cycle in food consumption associated with the SNAP monthly benefit issuance policy.

The development of Version 2 of the AN-SNAP casemix classification system.

Science.gov (United States)

Green, Janette; Gordon, Robert

2007-04-01

This paper presents the results of a recent review of the Australian National Sub-acute and Non-acute Patient (AN-SNAP) classification system. The AN-SNAP system was developed by the Centre for Health Service Development, University of Wollongong in 1997. The review was conducted between August 2005 and September 2006. Four clinical sub-committees comprising more than 50 clinicians from sub-acute services across New South Wales as well as representatives from Queensland and the Australian Capital Territory were established to develop a set of proposals to be considered for incorporation into Version 2 of the classification. It is proposed that the final AN-SNAP Version 2 classification will be available for implementation from 1 July 2007.

Numerical method for multigroup one-dimensional SN eigenvalue problems with no spatial truncation error

International Nuclear Information System (INIS)

Abreu, M.P.; Filho, H.A.; Barros, R.C.

1993-01-01

The authors describe a new nodal method for multigroup slab-geometry discrete ordinates S N eigenvalue problems that is completely free from all spatial truncation errors. The unknowns in the method are the node-edge angular fluxes, the node-average angular fluxes, and the effective multiplication factor k eff . The numerical values obtained for these quantities are exactly those of the dominant analytic solution of the S N eigenvalue problem apart from finite arithmetic considerations. This method is based on the use of the standard balance equation and two nonstandard auxiliary equations. In the nonmultiplying regions, e.g., the reflector, we use the multigroup spectral Green's function (SGF) auxiliary equations. In the fuel regions, we use the multigroup spectral diamond (SD) auxiliary equations. The SD auxiliary equation is an extension of the conventional auxiliary equation used in the diamond difference (DD) method. This hybrid characteristic of the SD-SGF method improves both the numerical stability and the convergence rate

Strategies to improve the dietary quality of Supplemental Nutrition Assistance Program (SNAP) beneficiaries: an assessment of stakeholder opinions.

Science.gov (United States)

Blumenthal, Susan J; Hoffnagle, Elena E; Leung, Cindy W; Lofink, Hayley; Jensen, Helen H; Foerster, Susan B; Cheung, Lilian Wy; Nestle, Marion; Willett, Walter C

2014-12-01

To examine the opinions of stakeholders on strategies to improve dietary quality of Supplemental Nutrition Assistance Program (SNAP) participants. Participants answered a thirty-eight-item web-based survey assessing opinions and perceptions of SNAP and programme policy changes. Survey of 522 individuals with stakeholder interest in SNAP, conducted in October through December 2011. The top three barriers to improving dietary quality identified were: (i) unhealthy foods marketed in low-income communities; (ii) the high cost of healthy foods; and (iii) lifestyle challenges faced by low-income individuals. Many respondents (70 %) also disagreed that current SNAP benefit levels were adequate to maintain a healthy diet. Stakeholders believed that vouchers, coupons or monetary incentives for purchasing healthful foods might have the greatest potential for improving the diets of SNAP participants. Many respondents (78 %) agreed that sodas should not be eligible for purchases with SNAP benefits. More than half (55 %) believed retailers could easily implement such restrictions. A majority of respondents (58 %) agreed that stores should stock a minimum quantity of healthful foods in order to be certified as a SNAP retailer, and most respondents (83 %) believed that the US Department of Agriculture should collect data on the foods purchased with SNAP benefits. Results suggest that there is broad stakeholder support for policies that align SNAP purchase eligibility with national public health goals of reducing food insecurity, improving nutrition and preventing obesity.

GPU accelerated simulations of 3D deterministic particle transport using discrete ordinates method

International Nuclear Information System (INIS)

Gong Chunye; Liu Jie; Chi Lihua; Huang Haowei; Fang Jingyue; Gong Zhenghu

2011-01-01

Graphics Processing Unit (GPU), originally developed for real-time, high-definition 3D graphics in computer games, now provides great faculty in solving scientific applications. The basis of particle transport simulation is the time-dependent, multi-group, inhomogeneous Boltzmann transport equation. The numerical solution to the Boltzmann equation involves the discrete ordinates (S n ) method and the procedure of source iteration. In this paper, we present a GPU accelerated simulation of one energy group time-independent deterministic discrete ordinates particle transport in 3D Cartesian geometry (Sweep3D). The performance of the GPU simulations are reported with the simulations of vacuum boundary condition. The discussion of the relative advantages and disadvantages of the GPU implementation, the simulation on multi GPUs, the programming effort and code portability are also reported. The results show that the overall performance speedup of one NVIDIA Tesla M2050 GPU ranges from 2.56 compared with one Intel Xeon X5670 chip to 8.14 compared with one Intel Core Q6600 chip for no flux fixup. The simulation with flux fixup on one M2050 is 1.23 times faster than on one X5670.

GPU accelerated simulations of 3D deterministic particle transport using discrete ordinates method

Science.gov (United States)

Gong, Chunye; Liu, Jie; Chi, Lihua; Huang, Haowei; Fang, Jingyue; Gong, Zhenghu

2011-07-01

Graphics Processing Unit (GPU), originally developed for real-time, high-definition 3D graphics in computer games, now provides great faculty in solving scientific applications. The basis of particle transport simulation is the time-dependent, multi-group, inhomogeneous Boltzmann transport equation. The numerical solution to the Boltzmann equation involves the discrete ordinates ( Sn) method and the procedure of source iteration. In this paper, we present a GPU accelerated simulation of one energy group time-independent deterministic discrete ordinates particle transport in 3D Cartesian geometry (Sweep3D). The performance of the GPU simulations are reported with the simulations of vacuum boundary condition. The discussion of the relative advantages and disadvantages of the GPU implementation, the simulation on multi GPUs, the programming effort and code portability are also reported. The results show that the overall performance speedup of one NVIDIA Tesla M2050 GPU ranges from 2.56 compared with one Intel Xeon X5670 chip to 8.14 compared with one Intel Core Q6600 chip for no flux fixup. The simulation with flux fixup on one M2050 is 1.23 times faster than on one X5670.

Calculation of multigroup reaction rates for the Ghana Research ...

African Journals Online (AJOL)

The discrete ordinate spatial model, which pro-vides solution to the differential form of the transport equation by the Carlson-SN (N=4) approach was adopted to solve the Ludwig-Boltzmann multigroup neutron transport equation for this analysis. The results show that for any fissile resonance absorber, the reaction rates ...

Multigroup computation of the temperature-dependent Resonance Scattering Model (RSM) and its implementation

Energy Technology Data Exchange (ETDEWEB)

Ghrayeb, S. Z. [Dept. of Mechanical and Nuclear Engineering, Pennsylvania State Univ., 230 Reber Building, Univ. Park, PA 16802 (United States); Ouisloumen, M. [Westinghouse Electric Company, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States); Ougouag, A. M. [Idaho National Laboratory, MS-3860, PO Box 1625, Idaho Falls, ID 83415 (United States); Ivanov, K. N.

2012-07-01

A multi-group formulation for the exact neutron elastic scattering kernel is developed. This formulation is intended for implementation into a lattice physics code. The correct accounting for the crystal lattice effects influences the estimated values for the probability of neutron absorption and scattering, which in turn affect the estimation of core reactivity and burnup characteristics. A computer program has been written to test the formulation for various nuclides. Results of the multi-group code have been verified against the correct analytic scattering kernel. In both cases neutrons were started at various energies and temperatures and the corresponding scattering kernels were tallied. (authors)

A lumped parameter method of characteristics approach and multigroup kernels applied to the subgroup self-shielding calculation in MPACT

International Nuclear Information System (INIS)

Stimpson, Shane G.; Liu, Yuxuan; Collins, Benjamin S.; Clarno, Kevin T.

2017-01-01

An essential component of the neutron transport solver is the resonance self-shielding calculation used to determine equivalence cross sections. The neutron transport code, MPACT, is currently using the subgroup self-shielding method, in which the method of characteristics (MOC) is used to solve purely absorbing fixed-source problems. Recent efforts incorporating multigroup kernels to the MOC solvers in MPACT have reduced runtime by roughly 2×. Applying the same concepts for self-shielding and developing a novel lumped parameter approach to MOC, substantial improvements have also been made to the self-shielding computational efficiency without sacrificing any accuracy. These new multigroup and lumped parameter capabilities have been demonstrated on two test cases: (1) a single lattice with quarter symmetry known as VERA (Virtual Environment for Reactor Applications) Progression Problem 2a and (2) a two-dimensional quarter-core slice known as Problem 5a-2D. From these cases, self-shielding computational time was reduced by roughly 3–4×, with a corresponding 15–20% increase in overall memory burden. An azimuthal angle sensitivity study also shows that only half as many angles are needed, yielding an additional speedup of 2×. In total, the improvements yield roughly a 7–8× speedup. Furthermore given these performance benefits, these approaches have been adopted as the default in MPACT.

A lumped parameter method of characteristics approach and multigroup kernels applied to the subgroup self-shielding calculation in MPACT

Directory of Open Access Journals (Sweden)

Shane Stimpson

2017-09-01

Full Text Available An essential component of the neutron transport solver is the resonance self-shielding calculation used to determine equivalence cross sections. The neutron transport code, MPACT, is currently using the subgroup self-shielding method, in which the method of characteristics (MOC is used to solve purely absorbing fixed-source problems. Recent efforts incorporating multigroup kernels to the MOC solvers in MPACT have reduced runtime by roughly 2×. Applying the same concepts for self-shielding and developing a novel lumped parameter approach to MOC, substantial improvements have also been made to the self-shielding computational efficiency without sacrificing any accuracy. These new multigroup and lumped parameter capabilities have been demonstrated on two test cases: (1 a single lattice with quarter symmetry known as VERA (Virtual Environment for Reactor Applications Progression Problem 2a and (2 a two-dimensional quarter-core slice known as Problem 5a-2D. From these cases, self-shielding computational time was reduced by roughly 3–4×, with a corresponding 15–20% increase in overall memory burden. An azimuthal angle sensitivity study also shows that only half as many angles are needed, yielding an additional speedup of 2×. In total, the improvements yield roughly a 7–8× speedup. Given these performance benefits, these approaches have been adopted as the default in MPACT.

Poor Dietary Guidelines Compliance among Low-Income Women Eligible for Supplemental Nutrition Assistance Program-Education (SNAP-Ed

Directory of Open Access Journals (Sweden)

Shinyoung Jun

2018-03-01

Full Text Available The Supplemental Nutrition Assistance Program-Education (SNAP-Ed program aims to improve nutritional intakes of low-income individuals (<185% poverty threshold. The objective of this study was to describe the compliance with Dietary Guidelines for Americans (DGA recommendations for fruits, vegetables, and whole grains among SNAP-Ed eligible (n = 3142 and ineligible (n = 3168 adult women (19–70 years nationwide and SNAP-Ed participating women in Indiana (n = 2623, using the NHANES 2007–2012 and Indiana SNAP-Ed survey data, respectively. Sensitivity analysis further stratified women by race/ethnicity and by current SNAP participation (<130% poverty threshold. Nationally, lower-income women were less likely to meet the fruit (21% vs. 25% and vegetable (11% vs. 19% guidelines than higher-income women, but did not differ on whole grains, which were ~5% regardless of income. The income differences in fruit and vegetable intakes were driven by non-Hispanic whites. Fewer SNAP-Ed-eligible U.S. women met fruit (21% vs. 55% and whole grain (4% vs. 18% but did not differ for vegetable recommendations (11% vs. 9% when compared to Indiana SNAP-Ed women. This same trend was observed among current SNAP participants. Different racial/ethnic group relationships with DGA compliance were found in Indiana compared to the nation. Nevertheless, most low-income women in the U.S. are at risk of not meeting DGA recommendations for fruits (79%, vegetables (89%, and whole grains (96%; SNAP-Ed participants in Indiana had higher compliance with DGA recommendations. Increased consumption of these three critical food groups would improve nutrient density, likely reduce calorie consumption by replacing high calorie choices, and improve fiber intakes.

SNAP Participants' Eating Patterns over the Benefit Month: A Time Use Perspective.

Directory of Open Access Journals (Sweden)

Karen S Hamrick

Full Text Available Individuals receiving monthly benefits through the U.S. Supplemental Nutrition Assistance Program (SNAP often fall short of food at the end of the month and some report feelings of hunger. To investigate this situation, we used time diaries from the 2006-08 American Time Use Survey and Eating & Health Module to identify the timing of days where respondents reported no eating occurrences. Analysis includes descriptive statistics, a logit model, and a simulated benefit month. We found that SNAP participants were increasingly more likely than nonparticipants to report a day with no eating occurrences over the benefit issuance cycle. This supports the view that there is a monthly cycle in food consumption associated with the SNAP monthly benefit issuance policy.

SNAP Participants’ Eating Patterns over the Benefit Month: A Time Use Perspective

Science.gov (United States)

2016-01-01

Individuals receiving monthly benefits through the U.S. Supplemental Nutrition Assistance Program (SNAP) often fall short of food at the end of the month and some report feelings of hunger. To investigate this situation, we used time diaries from the 2006–08 American Time Use Survey and Eating & Health Module to identify the timing of days where respondents reported no eating occurrences. Analysis includes descriptive statistics, a logit model, and a simulated benefit month. We found that SNAP participants were increasingly more likely than nonparticipants to report a day with no eating occurrences over the benefit issuance cycle. This supports the view that there is a monthly cycle in food consumption associated with the SNAP monthly benefit issuance policy. PMID:27410962

Immobilization of ferrocene-modified SNAP-fusion proteins

NARCIS (Netherlands)

Wasserberg, D.; Uhlenheuer, D.; Neirynck, P.; Neirynck, Pauline; Cabanas Danés, Jordi; Schenkel, J.H.; Ravoo, B.J.; An, Q.; Huskens, Jurriaan; Milroy, L.G.; Brunsveld, Luc; Jonkheijm, Pascal

2013-01-01

The supramolecular assembly of proteins on surfaces has been investigated via the site-selective incorporation of a supramolecular moiety on proteins. To this end, fluorescent proteins have been site-selectively labeled with ferrocenes, as supramolecular guest moieties, via SNAP-tag technology. The

Method for reducing snap in magnetic amplifiers

Science.gov (United States)

Fischer, R. L. E.; Word, J. L.

1968-01-01

Method of reducing snap in magnetic amplifiers uses a degenerative feedback circuit consisting of a resistor and a separate winding on a magnetic core. The feedback circuit extends amplifier range by allowing it to be used at lower values of output current.

Multi-group transport methods for high-resolution neutron activation analysis

International Nuclear Information System (INIS)

Burns, K. A.; Smith, L. E.; Gesh, C. J.; Shaver, M. W.

2009-01-01

The accurate and efficient simulation of coupled neutron-photon problems is necessary for several important radiation detection applications. Examples include the detection of nuclear threats concealed in cargo containers and prompt gamma neutron activation analysis for nondestructive determination of elemental composition of unknown samples. In these applications, high-resolution gamma-ray spectrometers are used to preserve as much information as possible about the emitted photon flux, which consists of both continuum and characteristic gamma rays with discrete energies. Monte Carlo transport is the most commonly used modeling tool for this type of problem, but computational times for many problems can be prohibitive. This work explores the use of multi-group deterministic methods for the simulation of neutron activation problems. Central to this work is the development of a method for generating multi-group neutron-photon cross-sections in a way that separates the discrete and continuum photon emissions so that the key signatures in neutron activation analysis (i.e., the characteristic line energies) are preserved. The mechanics of the cross-section preparation method are described and contrasted with standard neutron-gamma cross-section sets. These custom cross-sections are then applied to several benchmark problems. Multi-group results for neutron and photon flux are compared to MCNP results. Finally, calculated responses of high-resolution spectrometers are compared. Preliminary findings show promising results when compared to MCNP. A detailed discussion of the potential benefits and shortcomings of the multi-group-based approach, in terms of accuracy, and computational efficiency, is provided. (authors)

Beyond velocity and acceleration: jerk, snap and higher derivatives

Science.gov (United States)

Eager, David; Pendrill, Ann-Marie; Reistad, Nina

2016-11-01

The higher derivatives of motion are rarely discussed in the teaching of classical mechanics of rigid bodies; nevertheless, we experience the effect not only of acceleration, but also of jerk and snap. In this paper we will discuss the third and higher order derivatives of displacement with respect to time, using the trampolines and theme park roller coasters to illustrate this concept. We will also discuss the effects on the human body of different types of acceleration, jerk, snap and higher derivatives, and how they can be used in physics education to further enhance the learning and thus the understanding of classical mechanics concepts.

Multi-group neutron transport theory

International Nuclear Information System (INIS)

Zelazny, R.; Kuszell, A.

1962-01-01

Multi-group neutron transport theory. In the paper the general theory of the application of the K. M. Case method to N-group neutron transport theory in plane geometry is given. The eigenfunctions (distributions) for the system of Boltzmann equations have been derived and the completeness theorem has been proved. By means of general solution two examples important for reactor and shielding calculations are given: the solution of a critical and albedo problem for a slab. In both cases the system of singular integral equations for expansion coefficients into a full set of eigenfunction distributions has been reduced to the system of Fredholm-type integral equations. Some results can be applied also to some spherical problems. (author) [fr

Innovative, wearable snap connector technology for improved device networking in electronic garments

Science.gov (United States)

Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

2007-04-01

This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

On the calculation of multi-group fission spectrum vectors

International Nuclear Information System (INIS)

Mueller, E.Z.

1984-05-01

In this report, the problem of calculating fission spectrum vectors in a consistent manner is formulated. The practical implications of using fission spectrum vectors in multi-group transport calculations are also addressed. The significance of the weighting spectra used for the calculation of fission spectrum vectors is illustrated for the case of a simple neutronic assembly

Multi-group diffusion perturbation calculation code. PERKY (2002)

Energy Technology Data Exchange (ETDEWEB)

Iijima, Susumu; Okajima, Shigeaki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-12-01

Perturbation calculation code based on the diffusion theory ''PERKY'' is designed for nuclear characteristic analyses of fast reactor. The code calculates reactivity worth on the multi-group diffusion perturbation theory in two or three dimensional core model and kinetics parameters such as effective delayed neutron fraction, prompt neutron lifetime and absolute reactivity scale factor ({rho}{sub 0} {delta}k/k) for FCA experiments. (author)

A self-consistent nodal method in response matrix formalism for the multigroup diffusion equations

International Nuclear Information System (INIS)

Malambu, E.M.; Mund, E.H.

1996-01-01

We develop a nodal method for the multigroup diffusion equations, based on the transverse integration procedure (TIP). The efficiency of the method rests upon the convergence properties of a high-order multidimensional nodal expansion and upon numerical implementation aspects. The discrete 1D equations are cast in response matrix formalism. The derivation of the transverse leakage moments is self-consistent i.e. does not require additional assumptions. An outstanding feature of the method lies in the linear spatial shape of the local transverse leakage for the first-order scheme. The method is described in the two-dimensional case. The method is validated on some classical benchmark problems. (author)

Spectral Green’s function nodal method for multigroup SN problems with anisotropic scattering in slab-geometry non-multiplying media

International Nuclear Information System (INIS)

Menezes, Welton A.; Filho, Hermes Alves; Barros, Ricardo C.

2014-01-01

Highlights: • Fixed-source S N transport problems. • Energy multigroup model. • Anisotropic scattering. • Slab-geometry spectral nodal method. - Abstract: A generalization of the spectral Green’s function (SGF) method is developed for multigroup, fixed-source, slab-geometry discrete ordinates (S N ) problems with anisotropic scattering. The offered SGF method with the one-node block inversion (NBI) iterative scheme converges numerical solutions that are completely free from spatial truncation errors for multigroup, slab-geometry S N problems with scattering anisotropy of order L, provided L < N. As a coarse-mesh numerical method, the SGF method generates numerical solutions that generally do not give detailed information on the problem solution profile, as the grid points can be located considerably away from each other. Therefore, we describe in this paper a technique for the spatial reconstruction of the coarse-mesh solution generated by the multigroup SGF method. Numerical results are given to illustrate the method’s accuracy

TIMEX, 1-D Time-Dependent Multigroup Transport Theory with Delayed Neutron, Planar Cylindrical and Spherical Geometry

International Nuclear Information System (INIS)

Hill, T. R.; Reed, W. H.

1980-01-01

1 - Description of problem or function: TIMEX solves the time- dependent, one-dimensional multigroup transport equation with delayed neutrons in plane, cylindrical, spherical, and two-angle plane geometries. Both regular and adjoint, inhomogeneous and homogeneous problems subject to vacuum, reflective, periodic, white, albedo or inhomogeneous boundary flux conditions are solved. General anisotropic scattering is allowed and anisotropic inhomogeneous sources are permitted. 2 - Method of solution: The discrete ordinates approximation for the angular variable is used with the diamond (central) difference approximation for the angular extrapolation in curved geometries. A linear discontinuous finite element representation for the angular flux in each spatial mesh cell is used. Negative fluxes are eliminated by a local set-to-zero and correct algorithm. The time variable is differenced by an explicit technique that is unconditionally stable so that arbitrarily large time-steps can be taken. Two acceleration methods, exponential extrapolation and re-balance, are utilized to improve the accuracy of the time differencing scheme. 3 - Restrictions on the complexity of the problem: Variable dimensioning is used so that any combination of problem parameters leading to a container array less than MAXCOR can be accommodated. In addition, the CDC version permits the use of extended core storage less than MAXECS

Growth In SNAP Retailers Was Associated With Increased Client Enrollment In Georgia During The Great Recession.

Science.gov (United States)

Shannon, Jerry; Shannon, Sarah; Adams, Grace Bagwell; Lee, Jung Sun

2016-11-01

Policies to improve food accessibility in underserved areas often use direct financial incentives to attract new food retailers. Our analysis of data on the Supplemental Nutrition Assistance Program (SNAP) in Georgia before and after the Great Recession suggests that increased program enrollment improves access to food for SNAP beneficiaries by acting as an indirect subsidy to retailers. We divided food stores into four categories: large, midsize, small, and specialty retailers. Between 2008 and 2011 the number of SNAP enrollees increased by 87 percent, and between 2007 and 2014 the number of SNAP retailers in Georgia increased by 82 percent, primarily because of growth in the number of authorized small retailers. Inside metropolitan Atlanta, changes in the numbers of SNAP enrollees and authorized retailers were positively and significantly associated for small retailers. For the areas outside of metropolitan Atlanta, the association between changes in numbers of enrollees and authorized retailers was strongest for small retailers; more modest associations were also seen for large and specialty retailers. Policy makers should consider how retailers' sensitivity to and reliance on SNAP funding can be leveraged to improve not only food availability, but also access to healthy foods. Project HOPE—The People-to-People Health Foundation, Inc.

Sketch-based 3D modeling by aligning outlines of an image

Directory of Open Access Journals (Sweden)

Chunxiao Li

2016-07-01

Full Text Available In this paper we present an efficient technique for sketch-based 3D modeling using automatically extracted image features. Creating a 3D model often requires a drawing of irregular shapes composed of curved lines as a starting point but it is difficult to hand-draw such lines without introducing awkward bumps and edges along the lines. We propose an automatic alignment of a user׳s hand-drawn sketch lines to the contour lines of an image, facilitating a considerable level of ease with which the user can carelessly continue sketching while the system intelligently snaps the sketch lines to a background image contour, no longer requiring the strenuous effort and stress of trying to make a perfect line during the modeling task. This interactive technique seamlessly combines the efficiency and perception of the human user with the accuracy of computational power, applied to the domain of 3D modeling where the utmost precision of on-screen drawing has been one of the hurdles of the task hitherto considered a job requiring a highly skilled and careful manipulation by the user. We provide several examples to demonstrate the accuracy and efficiency of the method with which complex shapes were achieved easily and quickly in the interactive outline drawing task.

Intra-axonal Synthesis of SNAP25 Is Required for the Formation of Presynaptic Terminals

Directory of Open Access Journals (Sweden)

Andreia F.R. Batista

2017-09-01

Full Text Available Localized protein synthesis is a mechanism for developing axons to react acutely and in a spatially restricted manner to extracellular signals. As such, it is important for many aspects of axonal development, but its role in the formation of presynapses remains poorly understood. We found that the induced assembly of presynaptic terminals required local protein synthesis. Newly synthesized proteins were detectable at nascent presynapses within 15 min of inducing synapse formation in isolated axons. The transcript for the t-SNARE protein SNAP25, which is required for the fusion of synaptic vesicles with the plasma membrane, was recruited to presynaptic sites and locally translated. Inhibition of intra-axonal SNAP25 synthesis affected the clustering of SNAP25 and other presynaptic proteins and interfered with the release of synaptic vesicles from presynaptic sites. This study reveals a critical role for the axonal synthesis of SNAP25 in the assembly of presynaptic terminals.

A SNAP-tagged derivative of HIV-1--a versatile tool to study virus-cell interactions.

Directory of Open Access Journals (Sweden)

Manon Eckhardt

Full Text Available Fluorescently labeled human immunodeficiency virus (HIV derivatives, combined with the use of advanced fluorescence microscopy techniques, allow the direct visualization of dynamic events and individual steps in the viral life cycle. HIV proteins tagged with fluorescent proteins (FPs have been successfully used for live-cell imaging analyses of HIV-cell interactions. However, FPs display limitations with respect to their physicochemical properties, and their maturation kinetics. Furthermore, several independent FP-tagged constructs have to be cloned and characterized in order to obtain spectral variations suitable for multi-color imaging setups. In contrast, the so-called SNAP-tag represents a genetically encoded non-fluorescent tag which mediates specific covalent coupling to fluorescent substrate molecules in a self-labeling reaction. Fusion of the SNAP-tag to the protein of interest allows specific labeling of the fusion protein with a variety of synthetic dyes, thereby offering enhanced flexibility for fluorescence imaging approaches.Here we describe the construction and characterization of the HIV derivative HIV(SNAP, which carries the SNAP-tag as an additional domain within the viral structural polyprotein Gag. Introduction of the tag close to the C-terminus of the matrix domain of Gag did not interfere with particle assembly, release or proteolytic virus maturation. The modified virions were infectious and could be propagated in tissue culture, albeit with reduced replication capacity. Insertion of the SNAP domain within Gag allowed specific staining of the viral polyprotein in the context of virus producing cells using a SNAP reactive dye as well as the visualization of individual virions and viral budding sites by stochastic optical reconstruction microscopy. Thus, HIV(SNAP represents a versatile tool which expands the possibilities for the analysis of HIV-cell interactions using live cell imaging and sub-diffraction fluorescence

78 FR 12245 - Supplemental Nutrition Assistance Program: Suspension of SNAP Benefit Payments to Retailers

Science.gov (United States)

2013-02-22

..., national origin, gender, age, disability, marital or family status. Regulations at 7 CFR 272.6.... Discrimination in any aspect of the program administration is prohibited by these regulations, according to the... SNAP benefits at the location, store inventory, and the SNAP history of the store owners. For example...

Evaluation of the HTTR criticality and burnup calculations with continuous-energy and multigroup cross sections

Energy Technology Data Exchange (ETDEWEB)

Chiang, Min-Han; Wang, Jui-Yu [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Section 2, Kung-Fu Road, Hsinchu 30013, Taiwan (China); Sheu, Rong-Jiun, E-mail: rjsheu@mx.nthu.edu.tw [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Section 2, Kung-Fu Road, Hsinchu 30013, Taiwan (China); Department of Engineering System and Science, National Tsing Hua University, 101, Section 2, Kung-Fu Road, Hsinchu 30013, Taiwan (China); Liu, Yen-Wan Hsueh [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Section 2, Kung-Fu Road, Hsinchu 30013, Taiwan (China); Department of Engineering System and Science, National Tsing Hua University, 101, Section 2, Kung-Fu Road, Hsinchu 30013, Taiwan (China)

2014-05-01

The High Temperature Engineering Test Reactor (HTTR) in Japan is a helium-cooled graphite-moderated reactor designed and operated for the future development of high-temperature gas-cooled reactors. Two detailed full-core models of HTTR have been established by using SCALE6 and MCNP5/X, respectively, to study its neutronic properties. Several benchmark problems were repeated first to validate the calculation models. Careful code-to-code comparisons were made to ensure that two calculation models are both correct and equivalent. Compared with experimental data, the two models show a consistent bias of approximately 20–30 mk overestimation in effective multiplication factor for a wide range of core states. Most of the bias could be related to the ENDF/B-VII.0 cross-section library or incomplete modeling of impurities in graphite. After that, a series of systematic analyses was performed to investigate the effects of cross sections on the HTTR criticality and burnup calculations, with special interest in the comparison between continuous-energy and multigroup results. Multigroup calculations in this study were carried out in 238-group structure and adopted the SCALE double-heterogeneity treatment for resonance self-shielding. The results show that multigroup calculations tend to underestimate the system eigenvalue by a constant amount of ∼5 mk compared to their continuous-energy counterparts. Further sensitivity studies suggest the differences between multigroup and continuous-energy results appear to be temperature independent and also insensitive to burnup effects.

Evaluation of the HTTR criticality and burnup calculations with continuous-energy and multigroup cross sections

International Nuclear Information System (INIS)

Chiang, Min-Han; Wang, Jui-Yu; Sheu, Rong-Jiun; Liu, Yen-Wan Hsueh

2014-01-01

The High Temperature Engineering Test Reactor (HTTR) in Japan is a helium-cooled graphite-moderated reactor designed and operated for the future development of high-temperature gas-cooled reactors. Two detailed full-core models of HTTR have been established by using SCALE6 and MCNP5/X, respectively, to study its neutronic properties. Several benchmark problems were repeated first to validate the calculation models. Careful code-to-code comparisons were made to ensure that two calculation models are both correct and equivalent. Compared with experimental data, the two models show a consistent bias of approximately 20–30 mk overestimation in effective multiplication factor for a wide range of core states. Most of the bias could be related to the ENDF/B-VII.0 cross-section library or incomplete modeling of impurities in graphite. After that, a series of systematic analyses was performed to investigate the effects of cross sections on the HTTR criticality and burnup calculations, with special interest in the comparison between continuous-energy and multigroup results. Multigroup calculations in this study were carried out in 238-group structure and adopted the SCALE double-heterogeneity treatment for resonance self-shielding. The results show that multigroup calculations tend to underestimate the system eigenvalue by a constant amount of ∼5 mk compared to their continuous-energy counterparts. Further sensitivity studies suggest the differences between multigroup and continuous-energy results appear to be temperature independent and also insensitive to burnup effects

An analytical multigroup benchmark for (n, γ) and (n, n', γ) verification of diffusion theory algorithms

International Nuclear Information System (INIS)

Ganapol, B.D.

2011-01-01

Highlights: → Coupled neutron and gamma transport is considered in the multigroup diffusion approximation. → The model accommodates fission, up- and down-scattering and common neutron-gamma interactions. → The exact solution to the diffusion equation in a heterogeneous media of any number of regions is found. → The solution is shown to parallel the one-group case in a homogeneous medium. → The discussion concludes with a heterogeneous, 2 fuel-plate 93.2% enriched reactor fuel benchmark demonstration. - Abstract: The angular flux for the 'rod model' describing coupled neutron/gamma (n, γ) diffusion has a particularly straightforward analytical representation when viewed from the perspective of a one-group homogeneous medium. Cast in the form of matrix functions of a diagonalizable matrix, the solution to the multigroup equations in heterogeneous media is greatly simplified. We shall show exactly how the one-group homogeneous medium solution leads to the multigroup solution.

Niobium tunnel junction fabrication using e-gun evaporation and SNAP

Science.gov (United States)

Kortlandt, J.; van der Zant, H. S. J.; Schellingerhout, A. J. G.; Mooij, J. E.

1990-11-01

We have fabricated high quality small area Nb-Al-Al 2O 3-Nb junctions with SNAP, making use of e-beam evaporation in a 10 -5 Pa diffusion pumped vacuum system. Nominal dimensions of the junctions are 8x8, 4x4 and 2x2 μm 2. We obtain typical current densities of 5-6 × 10 +2A/cm 2 and (critical current) x (subgap resistance) products of 40 mV.

A meniscus causing painful snapping of the elbow joint: MR imaging with arthroscopic and histologic correlation

Energy Technology Data Exchange (ETDEWEB)

Huang, Guo-Shu; Chen, Cheng-Yu [National Defense Medical Center, Department of Radiology, Tri-Service General Hospital, Taipei (Taiwan); Lee, Chian-Her [National Defense Medical Center, Department of Orthopedic Surgery, Tri-Service General Hospital, Taipei (Taiwan); Lee, Herng-Sheng [National Defense Medical Center, Department of Pathology, Tri-Service General Hospital, Taipei (Taiwan)

2005-12-01

Snapping of the elbow joint can cause pain. We report a case of painful snapping elbow produced by an interposed meniscus in the radiohumeral joint in a 20-year-old man. The MR arthrogram demonstrated a meniscus-like tissue interposed between the radial head and humeral capitellum. The MR-arthrographic findings were well correlated with surgical findings. The location and appearance of the meniscus-like tissue was similar to that of meniscus in the knee joint. Histologic findings of the excised meniscus-like tissue showed a typical presentation of fibrocartilage. A meniscus may exist in the elbow joint and can be a rare cause of painful snapping elbow. MR arthrography is helpful for identifying the snapping tissue in the elbow joint. (orig.)

MPI version of NJOY and its application to multigroup cross-section generation

Energy Technology Data Exchange (ETDEWEB)

Alpan, A.; Haghighat, A.

1999-07-01

Multigroup cross-section libraries are needed in performing neutronics calculations. These libraries are referred to as broad-group libraries. The number of energy groups and group structure are highly dependent on the application and/or user's objectives. For example, for shielding calculations, broad-group libraries such as SAILOR and BUGLE with 47-neutron and 20-gamma energy groups are used. The common procedure to obtain a broad-group library is a three-step process: (1) processing pointwise ENDF (PENDF) format cross sections; (2) generating fine-group cross sections; and (3) collapsing fine-group cross sections to broad-group. The NJOY code is used to prepare fine-group cross sections by processing pointwise ENDF data. The code has several modules, each one performing a specific task. For instance, the module RECONR performs linearization and reconstruction of the cross sections, and the module GROUPR generates multigroup self-shielded cross sections. After fine-group, i.e., groupwise ENDF (GENDF), cross sections are produced, cross sections are self-shielded, and a one-dimensional transport calculation is performed to obtain flux spectra at specific regions in the model. These fluxes are then used as weighting functions to collapse the fine-group cross sections to obtain a broad-group cross-section library. The third step described is commonly performed by the AMPX code system. SMILER converts NJOY GENDF filed to AMPX master libraries, AJAX collects the master libraries. BONAMI performs self-shielding calculations, NITAWL converts the AMPX master library to a working library, XSDRNPM performs one-dimensional transport calculations, and MALOCS collapses fine-group cross sections to broad-group. Finally, ALPO is used to generate ANISN format libraries. In this three-step procedure, generally NJOY requires the largest amount of CPU time. This time varies depending on the user's specified parameters for each module, such as reconstruction tolerances

MPI version of NJOY and its application to multigroup cross-section generation

International Nuclear Information System (INIS)

Alpan, A.; Haghighat, A.

1999-01-01

Multigroup cross-section libraries are needed in performing neutronics calculations. These libraries are referred to as broad-group libraries. The number of energy groups and group structure are highly dependent on the application and/or user's objectives. For example, for shielding calculations, broad-group libraries such as SAILOR and BUGLE with 47-neutron and 20-gamma energy groups are used. The common procedure to obtain a broad-group library is a three-step process: (1) processing pointwise ENDF (PENDF) format cross sections; (2) generating fine-group cross sections; and (3) collapsing fine-group cross sections to broad-group. The NJOY code is used to prepare fine-group cross sections by processing pointwise ENDF data. The code has several modules, each one performing a specific task. For instance, the module RECONR performs linearization and reconstruction of the cross sections, and the module GROUPR generates multigroup self-shielded cross sections. After fine-group, i.e., groupwise ENDF (GENDF), cross sections are produced, cross sections are self-shielded, and a one-dimensional transport calculation is performed to obtain flux spectra at specific regions in the model. These fluxes are then used as weighting functions to collapse the fine-group cross sections to obtain a broad-group cross-section library. The third step described is commonly performed by the AMPX code system. SMILER converts NJOY GENDF filed to AMPX master libraries, AJAX collects the master libraries. BONAMI performs self-shielding calculations, NITAWL converts the AMPX master library to a working library, XSDRNPM performs one-dimensional transport calculations, and MALOCS collapses fine-group cross sections to broad-group. Finally, ALPO is used to generate ANISN format libraries. In this three-step procedure, generally NJOY requires the largest amount of CPU time. This time varies depending on the user's specified parameters for each module, such as reconstruction tolerances, temperatures

The 'Snap Vote' of 462/1 BCE

DEFF Research Database (Denmark)

Thomsen, Christian Ammitzbøll

2014-01-01

still holds that the absence of 4,000 politically conservative hoplites under the leadership of Kimon paved the way for radical democratic reform - championed by Ephialtes and voted through the Athenian assembly in a ‘snap vote’ by the mass of democratic rowers who remained in the city. This note re...

Approximate albedo boundary conditions for energy multigroup X,Y-geometry discrete ordinates nuclear global calculations

Energy Technology Data Exchange (ETDEWEB)

Silva, Davi J.M.; Nunes, Carlos E.A.; Alves Filho, Hermes; Barros, Ricardo C., E-mail: davijmsilva@yahoo.com.br, E-mail: ceanunes@yahoo.com.br, E-mail: rcbarros@pq.cnpq.br [Secretaria Municipal de Educacao de Itaborai, RJ (Brazil); Universidade Estacio de Sa (UNESA), Rio de Janeiro, RJ (Brazil); Universidade do Estado do Rio de Janeiro (UERJ), Novra Friburgo, RJ (Brazil). Instituto Politecnico. Departamento de Modelagem Computacional

2017-11-01

Discussed here is the accuracy of approximate albedo boundary conditions for energy multigroup discrete ordinates (S{sub N}) eigenvalue problems in two-dimensional rectangular geometry for criticality calculations in neutron fission reacting systems, such as nuclear reactors. The multigroup (S{sub N}) albedo matrix substitutes approximately the non-multiplying media around the core, e.g., baffle and reflector, as we neglect the transverse leakage terms within these non-multiplying regions. Numerical results to a typical model problem are given to illustrate the accuracy versus the computer running time. (author)

On efficiently computing multigroup multi-layer neutron reflection and transmission conditions

International Nuclear Information System (INIS)

Abreu, Marcos P. de

2007-01-01

In this article, we present an algorithm for efficient computation of multigroup discrete ordinates neutron reflection and transmission conditions, which replace a multi-layered boundary region in neutron multiplication eigenvalue computations with no spatial truncation error. In contrast to the independent layer-by-layer algorithm considered thus far in our computations, the algorithm here is based on an inductive approach developed by the present author for deriving neutron reflection and transmission conditions for a nonactive boundary region with an arbitrary number of arbitrarily thick layers. With this new algorithm, we were able to increase significantly the computational efficiency of our spectral diamond-spectral Green's function method for solving multigroup neutron multiplication eigenvalue problems with multi-layered boundary regions. We provide comparative results for a two-group reactor core model to illustrate the increased efficiency of our spectral method, and we conclude this article with a number of general remarks. (author)

Restructuring a State Nutrition Education and Obesity Prevention Program: Implications of a Local Health Department Model for SNAP-Ed.

Science.gov (United States)

Wu, Helen W; Backman, Desiree; Kizer, Kenneth W

The US Department of Agriculture Supplemental Nutrition Assistance Program-Education (SNAP-Ed) funds state programs to improve nutrition and physical activity in low-income populations through its Nutrition Education and Obesity Prevention grants. States vary in how they manage and structure these programs. California substantially restructured its program in 2012 to universally position local health departments (LHDs) as the programmatic lead in all jurisdictions. This study sought to determine whether California's reorganization aligned with desirable attributes of decentralized public management. This study conducted 40 in person, semistructured interviews with 57 local, state, and federal SNAP-Ed stakeholders between October 2014 and March 2015. Local respondents represented 15 counties in all 7 of California's SNAP-Ed regions. We identified 3 common themes that outlined advantages or disadvantages of local public management, and we further defined subthemes within: (1) coordination and communication (within local jurisdictions, across regions, between local and state), (2) efficiency (administrative, fiscal, program), and (3) quality (innovation, skills). We conducted qualitative content analysis to evaluate how respondents characterized the California experience for each theme, identifying positive and negative experiences. California's LHD model offers some distinct advantages, but the model does not exhibit all the advantages of decentralized public management. Strategic planning, partnerships, subcontracting, and fiscal oversight are closer to communities than previously. However, administrative burden remains high and LHDs are limited in their ability to customize programs on the basis of community needs because of state and federal constraints. California's use of a universal LHD model for SNAP-Ed is novel. Recent federal SNAP-Ed changes present an opportunity for other states to consider this structure. Employing small-scale approaches initially (eg

Semi-continuous and multigroup models in extended kinetic theory

International Nuclear Information System (INIS)

Koller, W.

2000-01-01

The aim of this thesis is to study energy discretization of the Boltzmann equation in the framework of extended kinetic theory. In case that external fields can be neglected, the semi- continuous Boltzmann equation yields a sound basis for various generalizations. Semi-continuous kinetic equations describing a three component gas mixture interacting with monochromatic photons as well as a four component gas mixture undergoing chemical reactions are established and investigated. These equations reflect all major aspects (conservation laws, equilibria, H-theorem) of the full continuous kinetic description. For the treatment of the spatial dependence, an expansion of the distribution function in terms of Legendre polynomials is carried out. An implicit finite differencing scheme is combined with the operator splitting method. The obtained numerical schemes are applied to the space homogeneous study of binary chemical reactions and to spatially one-dimensional laser-induced acoustic waves. In the presence of external fields, the developed overlapping multigroup approach (with the spline-interpolation as its extension) is well suited for numerical studies. Furthermore, two formulations of consistent multigroup approaches to the non-linear Boltzmann equation are presented. (author)

Distal triceps injuries (including snapping triceps): A systematic review of the literature.

Science.gov (United States)

Shuttlewood, Kimberley; Beazley, James; Smith, Christopher D

2017-06-18

To review current literature on types of distal triceps injury and determine diagnosis and appropriate management. We performed a systematic review in PubMed, Cochrane and EMBASE using the terms distal triceps tears and snapping triceps on the 10 th January 2017. We excluded all animal, review, foreign language and repeat papers. We reviewed all papers for relevance and of the papers left we were able to establish the types of distal triceps injury, how these injuries are diagnosed and investigated and the types of management of these injuries including surgical. The results are then presented in a review paper format. Three hundred and seventy-nine papers were identified of which 65 were relevant to distal triceps injuries. After exclusion we had 47 appropriate papers. The papers highlighted 2 main distal triceps injuries: Distal triceps tears and snapping triceps. Triceps tear are more common in males than females occurring in the 4 th -5 th decade of life and often due to a direct trauma but are also strongly associated with weightlifting and American football. The tears are diagnosed by history and clinically with a palpable gap. Diagnosis can be confirmed with the use of ultrasound (US) and magnetic resonance imaging. Treatment depends on type of tear. Partial tears can be treated conservatively with bracing and physio whereas acute tears need repair either open or arthroscopic using suture anchor or bone tunnel techniques with similar success. Chronic tears often need augmenting with tendon allograft or autograft. Snapping triceps are also seen more in men than women but at a mean age of 32 years. They are characterized by a snapping sensation mostly medially and can be associated with ulna nerve subluxation and ulna nerve symptoms. US is the diagnostic modality of choice due to its dynamic nature and to differentiate between snapping triceps tendon or ulna nerve. Treatment is conservative initially with activity avoidance and if that fails surgical

The sensitivity of graphene “snap-through” to substrate geometry

KAUST Repository

Wagner, Till J. W.

2012-01-01

We study theoretically the deposition of few layer graphene sheets onto a grooved substrate incorporating adhesion between substrate and sheet. We develop a model to understand the equilibrium of the sheet allowing for partial conformation of sheet to substrate. This model gives physical insight into recent observations of snap-through from flat to conforming states and emphasizes the crucial role of substrate shape in determining the nature of this transition. Our analytical results are consistent with numerical simulations using a van der Waals-like interaction. Finally, we propose a substrate shape that should exhibit a continuous, rather than snap-through, transition. © 2012 American Institute of Physics.

Social comparison and perceived breach of psychological contract: their effects on burnout in a multigroup analysis.

Science.gov (United States)

Cantisano, Gabriela Topa; Domínguez, J Francisco Morales; García, J Luis Caeiro

2007-05-01

This study focuses on the mediator role of social comparison in the relationship between perceived breach of psychological contract and burnout. A previous model showing the hypothesized effects of perceived breach on burnout, both direct and mediated, is proposed. The final model reached an optimal fit to the data and was confirmed through multigroup analysis using a sample of Spanish teachers (N = 401) belonging to preprimary, primary, and secondary schools. Multigroup analyses showed that the model fit all groups adequately.

The problem of resonance self-shielding effect in neutron multigroup calculations

International Nuclear Information System (INIS)

Wang Qingming; Huang Jinghua

1991-01-01

It is not allowed to neglect the resonance self-shielding effect in hybrid blanket and fast reactor neutron designs. The authors discussed the importance as well as the method of considering the resonance self-shielding effect in hybrid blanket and fast reactor neutron multigroup calculations

Recent validation experience with multigroup cross-section libraries and scale

International Nuclear Information System (INIS)

Bowman, S.M.; Wright, R.Q.; DeHart, M.D.; Parks, C.V.; Petrie, L.M.

1995-01-01

This paper will discuss the results obtained and lessons learned from an extensive validation of new ENDF/B-V and ENDF/B-VI multigroup cross-section libraries using analyses of critical experiments. The KENO V. a Monte Carlo code in version 4.3 of the SCALE computer code system was used to perform the critical benchmark calculations via the automated SCALE sequence CSAS25. The cross-section data were processed by the SCALE automated problem-dependent resonance-processing procedure included in this sequence. Prior to calling KENO V.a, CSAS25 accesses BONAMI to perform resonance self-shielding for nuclides with Bondarenko factors and NITAWL-II to process nuclides with resonance parameter data via the Nordheim Integral Treatment

A 3D heat conduction model for block-type high temperature reactors and its implementation into the code DYN3D

International Nuclear Information System (INIS)

Baier, Silvio; Kliem, Soeren; Rohde, Ulrich

2011-01-01

The gas-cooled high temperature reactor is a concept to produce energy at high temperatures with a high level of inherent safety. It gets special attraction due to e.g. high thermal efficiency and the possibility of hydrogen production. In addition to the PBMR (Pebble Bed Modular Reactor) the (V)HTR (Very high temperature reactor) concept has been established. The basic design of a prismatic HTR consists of the following elements. The fuel is coated with four layers of isotropic materials. These so-called TRISO particles are dispersed into compacts which are placed in a graphite block matrix. The graphite matrix additionally contains holes for the coolant gas. A one-dimensional model is sufficient to describe (the radial) heat transfer in LWRs. But temperature gradients in a prismatic HTR can occur in axial as well as in radial direction, since regions with different heat source release and with different coolant temperature heat up are coupled through the graphite matrix elements. Furthermore heat transfer into reflector elements is possible. DYN3D is a code system for coupled neutron and thermal hydraulics core calculations developed at the Helmholtzzentrum Dresden-Rossendorf. Concerning neutronics DYN3D consists of a two-group and multi-group diffusion approach based on nodal expansion methods. Furthermore a 1D thermal-hydraulics model for parallel coolant flow channels is included. The DYN3D code was extensively verified and validated via numerous numerical and experimental benchmark problems. That includes the NEA CRP benchmarks for PWR and BWR, the Three-Miles-Island-1 main steam line break and the Peach Bottom Turbine Trip benchmarks, as well as measurements carried out in an original-size VVER-1000 mock-up. An overview of the verification and validation activities can be found. Presently a DYN3D-HTR version is under development. It involves a 3D heat conduction model to deal with higher-(than one)-dimensional effects of heat transfer and heat conduction in

BUGLE-96: A revised multigroup cross section library for LWR applications based on ENDF/B-VI Release 3

International Nuclear Information System (INIS)

White, J.E.; Ingersoll, D.T.; Slater, C.O.; Roussin, R.W.

1996-01-01

A revised multigroup cross-section library based ON ENDF/B-VI Release 3 has been produced for light water reactor shielding and reactor pressure vessel dosimetry applications. This new broad-group library, which is designated BUGLE-96, represents an improvement over the BUGLE-93 library released in February 1994 and is expected to replace te BUGLE-93 data. The cross-section processing methodology is the same as that used for producing BUGLE-93 and is consistent with ANSI/ANS 6.1.2. As an added feature, cross-section sets having upscatter data for four thermal neutron groups are included in the BUGLE-96 package available from the Radiation Shielding Information Center. The upscattering data should improve the application of this library to the calculation of more accurate thermal fluences, although more computer time will be required. The incorporation of feedback from users has resulted in a data library that addresses a wider spectrum of user needs

CLUB - a multigroup integral transport theory code for lattice calculations of PHWR cells

International Nuclear Information System (INIS)

Krishnani, P.D.

1992-01-01

The computer code CLUB has been developed to calculate lattice parameters as a function of burnup for a pressurised heavy water reactor (PHWR) lattice cell containing fuel in the form of cluster. It solves the multigroup integral transport equation by the method based on combination of small scale collision probability (CP) method and large scale interface current technique. The calculations are performed by using WIMS 69 group cross section library or its condensed versions of 27 or 28 group libraries. It can also compute Keff from the given geometrical buckling in the input using multigroup diffusion theory in fundamental mode. The first order differential burnup equations can be solved by either Trapezoidal rule or Runge-Kutta method. (author). 17 refs., 2 figs

Correction of multigroup cross sections for resolved resonance interference in mixed absorbers

International Nuclear Information System (INIS)

Williams, M.L.

1982-07-01

The effect that interference between resolved resonances has on averaging multigroup cross sections is examined for thermal reactor-type problems. A simple and efficient numerical scheme is presented to correct a preprocessed multigroup library for interference effects. The procedure is implemented in a design oriented lattice physics computer code and compared with rigorous numerical calculations. The approximate method for computing resonance interference correction factors is applied to obtaining fine-group cross sections for a homogeneous uranium-plutonium mixture and a uranium oxide lattice. It was found that some fine group cross sections are changed by more than 40% due to resonance interference. The change in resonance interference correction factors due to burnup of a PWR fuel pin is examined and found to be small. The effect of resolved resonance interference on collapsed broad-group cross sections for thermal reactor calculations is discussed

ERRFILS: a preliminary library of 30-group multigroup covariance data for use in CTR sensitivity studies

International Nuclear Information System (INIS)

LaBauve, R.J.; Muir, D.W.

1978-01-01

A library of 30-group multigroup covariance data was prepared from preliminary ENDF/B-V data with the NJOY code. Data for Fe, Cr, Ni, 10 B, C, Cu, H, and Pb are included in this library. Reactions include total cross sections, elastic and inelastic scattering cross sections, and the most important absorption cross sections. Typical data from the file are shown. 3 tables

A Simple Snap Oscillator with Coexisting Attractors, Its Time-Delayed Form, Physical Realization, and Communication Designs

Science.gov (United States)

Rajagopal, Karthikeyan; Jafari, Sajad; Akgul, Akif; Karthikeyan, Anitha; Çiçek, Serdar; Shekofteh, Yasser

2018-05-01

In this paper, we report a novel chaotic snap oscillator with one nonlinear function. Dynamic analysis of the system shows the existence of bistability. To study the time delay effects on the proposed snap oscillator, we introduce multiple time delay in the fourth state equation. Investigation of dynamical properties of the time-delayed system shows that the snap oscillator exhibits the same multistable properties as the nondelayed system. The new multistable hyperjerk chaotic system has been tested in chaos shift keying and symmetric choc shift keying modulated communication designs for engineering applications. It has been determined that the symmetric chaos shift keying modulated communication system implemented with the new chaotic system is more successful than the chaos shift keying modulation for secure communication. Also, circuit implementation of the chaotic snap oscillator with tangent function is carried out showing its feasibility.

3D heterogeneous transport calculations of CANDU fuel with EVENT/HELIOS

International Nuclear Information System (INIS)

Rahnema, F.; Mosher, S.; Ilas, D.; De Oliveira, C.; Eaton, M.; Stamm'ler, R.

2002-01-01

The applicability of the EVENT/HELIOS package to CANDU lattice cell analysis is studied in this paper. A 45-group cross section library is generated using the lattice depletion transport code HELIOS. This library is then used with the 3-D transport code EVENT to compute the pin fission densities and the multiplication constants for six configurations typical of a CANDU cell. The results are compared to those from MCNP with the same multigroup library. Differences of 70-150 pcm in multiplication constant and 0.08-0.95% in pin fission density are found for these cases. It is expected that refining the EVENT calculations can reduce these differences. This gives confidence in applying EVENT to transient analyses at the fuel pin level in a selected part of a CANDU core such as the limiting bundle during a loss of coolant accident (LOCA). (author)

The snap-back effect of an RC-IGBT and its simulations

International Nuclear Information System (INIS)

Zhang Wenliang; Tian Xiaoli; Zhu Yangjun; Tan Jingfei

2013-01-01

The RC-IGBT (reverse conducting insulated gate bipolar transistor) is a new kind of power semiconductor device which has many advantages such as smaller chip size, higher power density, lower manufacturing cost, softer turn off behavior, and better reliability. However, its performance has a number of drawbacks, such as the snap-back effect. In this paper, an introduction about the snap-back effect of the RC-IGBT is given firstly. Then the physical explanations are presented with two simplified models. After that, some numerical simulations are carried out to verify the correctness of the models. (semiconductor devices)

Solution of the neutron transport equation by the collision probability for 3D geometries; Resolution de l`equation du transport pour les neutrons par la methode des probabilites de collision dans le geometries 3D

Energy Technology Data Exchange (ETDEWEB)

Oujidi, B.

1996-09-19

The TDT code solves the multigroup transport equation by the interface current method for unstructured 2D geometries. This works presents the extension of TDT to the treatment of 3D geometries obtained by axial displacement of unstructured 2D geometries. Three-dimensional trajectories are obtained by lifting the 2D trajectories. The code allows for the definition of macro-domains in the axial direction to be used in the interface-current method. Specular and isotropic reflection or translations boundary conditions can be applied to the horizontal boundaries of the domain. Numerical studies have shown the need for longer trajectory cutoffs for trajectories intersecting horizontal boundaries. Numerical applications to the calculation of local power peaks are given in a second part for: the local destruction of a Pyrex absorbent and inter-assembly (UO{sub 2}-MOX) power distortion due to pellet collapsing at the top of the core. Calculations with 16 groups were performed by coupling TDT to the spectral code APOLLO2. One-group comparisons with the Monte Carlo code TRIMARAN2 are also given. (author). 30 refs.

A multigroup treatment of radiation transport

International Nuclear Information System (INIS)

Tahir, N.A.; Laing, E.W.; Nicholas, D.J.

1980-12-01

A multi-group radiation package is outlined which will accurately handle radiation transfer problems in laser-produced plasmas. Bremsstrahlung, recombination and line radiation are included as well as fast electron Bremsstrahlung radiation. The entire radiation field is divided into a large number of groups (typically 20), which diffuse radiation energy in real space as well as in energy space, the latter occurring via electron-radiation interaction. Using this model a radiation transport code will be developed to be incorporated into MEDUSA. This modified version of MEDUSA will be used to study radiative preheat effects in laser-compression experiments at the Central Laser Facility, Rutherford Laboratory. The model is also relevant to heavy ion fusion studies. (author)

The Australian National Sub-acute and Non-acute Patient Casemix Classification (AN-SNAP): its application and value in a stroke rehabilitation programme.

Science.gov (United States)

Lowthian, P; Disler, P; Ma, S; Eagar, K; Green, J; de Graaff, S

2000-10-01

To investigate whether the Australian National Sub-acute and Non-acute Patient Casemix Classification (SNAP) and Functional Independence Measure and Functional Related Group (Version 2) (FIM-FRG2) casemix systems can be used to predict functional outcome, and reduce the variance of length of stay (LOS) of patients undergoing rehabilitation after strokes. The study comprised a retrospective analysis of the records of patients admitted to the Cedar Court Healthsouth Rehabilitation Hospital for rehabilitation after stroke. The sample included 547 patients (83.3% of those admitted with stroke during this period). Patient data were stratified for analysis into the five SNAP or nine FIM-FRG2 groups, on the basis of the admission FIM scores and age. The AN-SNAP classification accounted for a 30.7% reduction of the variance of LOS, and 44.2% of motor FIM, and the FIM-FRG2 accounts for 33.5% and 56.4% reduction respectively. Comparison of the Cedar Court with the national AN-SNAP data showed differences in the LOS and functional outcomes of older, severely disabled patients. Intensive rehabilitation in selected patients of this type appears to have positive effects, albeit with a slightly longer period of inpatient rehabilitation. Casemix classifications can be powerful management tools. Although FIM-FRG2 accounts for more reduction in variance than SNAP, division into nine groups meant that some contained few subjects. This paper supports the introduction of AN-SNAP as the standard casemix tool for rehabilitation in Australia, which will hopefully lead to rational, adequate funding of the rehabilitation phase of care.

Optimization of multi-group cross sections for fast reactor analysis

International Nuclear Information System (INIS)

Chin, M. R.; Manalo, K. L.; Edgar, C. A.; Paul, J. N.; Molinar, M. P.; Redd, E. M.; Yi, C.; Sjoden, G. E.

2013-01-01

The selection of the number of broad energy groups, collapsed broad energy group boundaries, and their associated evaluation into collapsed macroscopic cross sections from a general 238-group ENDF/B-VII library dramatically impacted the k eigenvalue for fast reactor analysis. An analysis was undertaken to assess the minimum number of energy groups that would preserve problem physics; this involved studies using the 3D deterministic transport parallel code PENTRAN, the 2D deterministic transport code SCALE6.1, the Monte Carlo based MCNP5 code, and the YGROUP cross section collapsing tool on a spatially discretized MOX fuel pin comprised of 21% PUO 2 -UO 2 with sodium coolant. The various cases resulted in a few hundred pcm difference between cross section libraries that included the 238 multi-group reference, and cross sections rendered using various reaction and adjoint weighted cross sections rendered by the YGROUP tool, and a reference continuous energy MCNP case. Particular emphasis was placed on the higher energies characteristic of fission neutrons in a fast spectrum; adjoint computations were performed to determine the average per-group adjoint fission importance for the MOX fuel pin. This study concluded that at least 10 energy groups for neutron transport calculations are required to accurately predict the eigenvalue for a fast reactor system to within 250 pcm of the 238 group case. In addition, the cross section collapsing/weighting schemes within YGROUP that provided a collapsed library rendering eigenvalues closest to the reference were the contribution collapsed, reaction rate weighted scheme. A brief analysis on homogenization of the MOX fuel pin is also provided, although more work is in progress in this area. (authors)

The Schedule for Nonadaptive and Adaptive Personality for Youth (SNAP-Y): a new measure for assessing adolescent personality and personality pathology.

Science.gov (United States)

Linde, Jennifer A; Stringer, Deborah; Simms, Leonard J; Clark, Lee Anna

2013-08-01

The Schedule for Nonadaptive and Adaptive Personality-Youth Version (SNAP-Y) is a new, reliable self-report questionnaire that assesses 15 personality traits relevant to both normal-range personality and the alternative DSM-5 model for personality disorder. Community adolescents, 12 to 18 years old (N = 364), completed the SNAP-Y; 347 also completed the Big Five Inventory-Adolescent, 144 provided 2-week retest data, and 128 others completed the Minnesota Multiphasic Personality Inventory-Adolescent. Outpatient adolescents (N = 103) completed the SNAP-Y, and 97 also completed the Minnesota Multiphasic Personality Inventory-Adolescent. The SNAP-Y demonstrated strong psychometric properties, and structural, convergent, discriminant, and external validities. Consistent with the continuity of personality, results paralleled those in adult and college samples using the adult Schedule for Nonadaptive and Adaptive Personality-Second Edition (SNAP-2), from which the SNAP-Y derives and which has established validity in personality-trait assessment across the normal-abnormal continuum. The SNAP-Y thus provides a new, clinically useful instrument to assess personality traits and personality pathology in adolescents.

ETOA, ABBN Multigroup Constants from ENDF/B for Fast Reactors

International Nuclear Information System (INIS)

Nishimura, Hideo

1977-01-01

1 - Nature of physical problem solved: Production of ABBN type group constants up to 70 groups for fast reactor calculations, reading ENDF/B library as input. 2 - Method of solution: The multigroup method of Bondarenko et al. is used for processing basic nuclear data. Calculational algorithms for an unresolved resonance region are the same as those in the MC 2 code. For a resolved resonance region, an ultrafine energy structure dependent on a level scheme is adopted. 3 - Restrictions on the complexity of the problem: Maximum number of: energy groups: 70; sigma 0 values: 6; temperatures: 5. Self-shielding factors for an unrealistically low value of sigma 0 are not guaranteed because of the approximations used in the unresolved resonance region

Solution of the neutron transport equation by the collision probability method for 3D geometries; Resolution de l`equation du transport par les neutrons par la methode des probabilites de collision dans les geometries 3D

Energy Technology Data Exchange (ETDEWEB)

Oujidi, B

1996-09-19

The TDT code solves the multigroup transport equation by the interface-current method for unstructured 2D geometries. This works presents the extension of TDT to the treatment of 3D geometries obtained by axial displacement of unstructured 2D geometries. Three-dimensional trajectories are obtained by lifting the 2D trajectories. The code allows for the definition of macro-domains in the axial direction to be used in interface-current method. Specular and isotropic reflection or translations boundary conditions can be applied to the horizontal boundaries of the domain. Numerical studies have shown the need for longer trajectory cutoffs for trajectories intersecting horizontal boundaries. Numerical applications to the calculation of local power peaks are given in a second part for: the local destruction of a Pyrex absorbent, inter-assembly (U02-MOX) power distortion due to pellet collapsing at the top of the core. Calculations with 16 groups were performed by coupling TDT to the spectral code APOLLO2. One-group comparisons with the Monte Carlo code TRIMARAN2 are also given. (author) 30 refs.

Verification of KARMA GEOM/TRPT Module with Given Multi-group Cross Sections

International Nuclear Information System (INIS)

Koo, Bon Seung; Hong, Ser Gi; Song, Jae Seung

2009-01-01

KAERI has developed a two-dimensional multigroup transport theory code KARMA (Kernel Analyzer by Ray-tracing Method for Fuel Assembly). KARMA uses CMFD (Coarse Mesh Finite Difference) accelerated MOC (Method of Characteristics) method for burnup calculation on a single fuel pin, a fuel assembly and a core consisting of rectangular array of fuel pins. KARMA code intends to be employed as a nuclear design tool for the Korean commercial pressurizer water reactor. Prior to the application to actual assembly designs, the code has to be approved by regularity agency. Therefore, it is essential that the reliability of KARMA code should be sufficiently evaluated against well-defined benchmark problems. In this paper, verification of GEOM/TRPT modules of KARMA was performed to confirm a reliability of the KARMA transport solution via comparisons with Monte Carlo calculations by using a consistent set of multi-group macroscopic cross-sections

Scalable Multi-group Key Management for Advanced Metering Infrastructure

OpenAIRE

Benmalek , Mourad; Challal , Yacine; Bouabdallah , Abdelmadjid

2015-01-01

International audience; Advanced Metering Infrastructure (AMI) is composed of systems and networks to incorporate changes for modernizing the electricity grid, reduce peak loads, and meet energy efficiency targets. AMI is a privileged target for security attacks with potentially great damage against infrastructures and privacy. For this reason, Key Management has been identified as one of the most challenging topics in AMI development. In this paper, we propose a new Scalable multi-group key ...

Optimal calculational schemes for solving multigroup photon transport problem

International Nuclear Information System (INIS)

Dubinin, A.A.; Kurachenko, Yu.A.

1987-01-01

A scheme of complex algorithm for solving multigroup equation of radiation transport is suggested. The algorithm is based on using the method of successive collisions, the method of forward scattering and the spherical harmonics method, and is realized in the FORAP program (FORTRAN, BESM-6 computer). As an example the results of calculating reactor photon transport in water are presented. The considered algorithm being modified may be used for solving neutron transport problems

PENBURN - A 3-D Zone-Based Depletion/Burnup Solver

International Nuclear Information System (INIS)

Manalo, Kevin; Plower, Thomas; Rowe, Mireille; Mock, Travis; Sjoden, Glenn E.

2008-01-01

PENBURN (Parallel Environment Burnup) is a general depletion/burnup solver which, when provided with zone-based reaction rates, computes time-dependent isotope concentrations for a set of actinides and fission products. Burnup analysis in PENBURN is performed with a direct Bateman-solver chain solution technique. Specifically, in tandem with PENBURN is the use of PENTRAN, a parallel multi-group anisotropic Sn code for 3-D Cartesian geometries. In PENBURN, the linear chain method is actively used to solve individual isotope chains which are then fully attributed by the burnup code to yield integrated isotope concentrations for each nuclide specified. Included with the discussion of code features, a single PWR fuel pin calculation with the burnup code is performed and detailed with a benchmark comparison to PIE (Post-Irradiation Examination) data within the SFCOMPO (Spent Fuel Composition / NEA) database, and also with burnup codes in SCALE5.1. Conclusions within the paper detail, in PENBURN, the accuracy of major actinides, flux profile behavior as a function of burnup, and criticality calculations for the PWR fuel pin model. (authors)

Measuring the Effect of Supplemental Nutrition Assistance Program (SNAP) Participation on Food Security.

OpenAIRE

James Mabli; Jim Ohls; Lisa Dragoset; Laura Castner; Betsy Santos

2013-01-01

The Supplemental Nutrition Assistance Program (SNAP) provides food assistance to more than 47 million low-income Americans every month. It aims to reduce hunger by facilitating beneficiaries’ access to enough food for a healthy, active lifestyle, otherwise known as "food security." Our study conducted for the Food and Nutrition Service of the U.S. Department of Agriculture shows that SNAP participation is associated with improved food security. The study is the largest and most rigorous one...

Directed supramolecular surface assembly of SNAP-tag fusion proteins

NARCIS (Netherlands)

Uhlenheuer, D.A.; Wasserberg, D.; Haase, C.; Nguyen, H.; Schenkel, J.H.; Huskens, J.; Ravoo, B.J.; Jonkheijm, P.; Brunsveld, L.

2012-01-01

Supramolecular assembly of proteins on surfaces and vesicles was investigated by site-selective incorporation of a supramolecular guest element on proteins. Fluorescent proteins were site-selectively labeled with bisadamantane by SNAP-tag technology. The assembly of the bisadamantane functionalized

Directed Supramolecular Surface Assembly of SNAP-tag Fusion Proteins

NARCIS (Netherlands)

Uhlenheuer, D.A.; Wasserberg, D.; Haase, C.; Nguyen, Hoang D.; Schenkel, J.H.; Huskens, Jurriaan; Ravoo, B.J.; Jonkheijm, Pascal; Brunsveld, Luc

2012-01-01

Supramolecular assembly of proteins on surfaces and vesicles was investigated by site-selective incorporation of a supramolecular guest element on proteins. Fluorescent proteins were site-selectively labeled with bisadamantane by SNAP-tag technology. The assembly of the bisadamantane functionalized

Polycyclic aromatic hydrocarbons affect survival and development of common snapping turtle (Chelydra serpentina) embryos and hatchlings

Energy Technology Data Exchange (ETDEWEB)

Van Meter, Robin J [School of Environmental Science, Engineering, and Policy and Department of Bioscience and Biotechnology, Drexel University, 3141 Chestnut Street, Philadelphia, PA 19104 (United States); Spotila, James R [School of Environmental Science, Engineering, and Policy and Department of Bioscience and Biotechnology, Drexel University, 3141 Chestnut Street, Philadelphia, PA 19104 (United States); Avery, Harold W [School of Environmental Science, Engineering, and Policy and Department of Bioscience and Biotechnology, Drexel University, 3141 Chestnut Street, Philadelphia, PA 19104 (United States)

2006-08-15

Polycyclic aromatic hydrocarbons (PAHs) are toxic compounds found in the John Heinz National Wildlife Refuge in Philadelphia, Pennsylvania. We assessed the impact of PAHs and crude oil on snapping turtle development and behavior by exposing snapping turtle eggs from the Refuge and from three clean reference sites to individual PAHs or a crude oil mixture at stage 9 of embryonic development. Exposure to PAHs had a significant effect on survival rates in embryos from one clean reference site, but not in embryos from the other sites. There was a positive linear relationship between level of exposure to PAHs and severity of deformities in embryos collected from two of the clean reference sites. Neither righting response nor upper temperature tolerance (critical thermal maximum, CTM) of snapping turtle hatchlings with no or minor deformities was significantly affected by exposure to PAHs. - Exposure to polycyclic aromatic hydrocarbons on the egg reduces survival of snapping turtle embryos and causes developmental abnormalities.

Polycyclic aromatic hydrocarbons affect survival and development of common snapping turtle (Chelydra serpentina) embryos and hatchlings

International Nuclear Information System (INIS)

Van Meter, Robin J.; Spotila, James R.; Avery, Harold W.

2006-01-01

Polycyclic aromatic hydrocarbons (PAHs) are toxic compounds found in the John Heinz National Wildlife Refuge in Philadelphia, Pennsylvania. We assessed the impact of PAHs and crude oil on snapping turtle development and behavior by exposing snapping turtle eggs from the Refuge and from three clean reference sites to individual PAHs or a crude oil mixture at stage 9 of embryonic development. Exposure to PAHs had a significant effect on survival rates in embryos from one clean reference site, but not in embryos from the other sites. There was a positive linear relationship between level of exposure to PAHs and severity of deformities in embryos collected from two of the clean reference sites. Neither righting response nor upper temperature tolerance (critical thermal maximum, CTM) of snapping turtle hatchlings with no or minor deformities was significantly affected by exposure to PAHs. - Exposure to polycyclic aromatic hydrocarbons on the egg reduces survival of snapping turtle embryos and causes developmental abnormalities

Solution of the Multigroup-Diffusion equation by the response matrix method

International Nuclear Information System (INIS)

Oliveira, C.R.E.

1980-10-01

A preliminary analysis of the response matrix method is made, considering its application to the solution of the multigroup diffusion equations. The one-dimensional formulation is presented and used to test some flux expansions, seeking the application of the method to the two-dimensional problem. This formulation also solves the equations that arise from the integro-differential synthesis algorithm. The slow convergence of the power method, used to solve the eigenvalue problem, and its acceleration by means of the Chebyshev polynomial method, are also studied. An algorithm for the estimation of the dominance ratio is presented, based on the residues of two successive iteration vectors. This ratio, which is not known a priori, is fundamental for the efficiency of the method. Some numerical problems are solved, testing the 1D formulation of the response matrix method, its application to the synthesis algorithm and also, at the same time, the algorithm to accelerate the source problem. (Author) [pt

Reconceiving SNAP: Is Nutritional Assistance Really Income Support?

Science.gov (United States)

Besharov, Douglas J.

2016-01-01

Since its creation, the Supplemental Nutrition Assistance Program (SNAP) has changed from an antihunger program to an income-supplementation program. Because the program (and its predecessor Food Stamp Program) was not designed for this purpose, the result is a program that has many unintended and, many believe, negative effects. The key challenge…

Achievement and qualification of multigroup cross-section library for light water reactor calculation

International Nuclear Information System (INIS)

Gastaldi, B.

1986-07-01

This study intends to improve then to check on integral experiments, the calculation of the main neutronic parameters in light water moderated lattices: Uranium 238 capture and consequently Plutonium 239 build-up, multiplication factor, temperature coefficient. The first part of this work concerns the resonant reaction rate calculation method implemented in the APOLLO code, the so-called LIVOLANT and JEANPIERRE formalism. The errors introduced by the corresponding assumptions are quantified and we propose substitution methods which avoid large biases and supply satisfactory results. The second part is dedicated to the cross-section evaluation of uranium major isotopes and to the achievement of APOLLO multigroup cross-sections. This cross-section set takes into considerations on the one hand the recent differential information and the other hand the various integral information obtained in the French Atomic Energy Commission facilities. The nuclear data file (JEF abd ENDF/B5) processing, for multigroup and self-shielded cross-sections achieving enable us to check the new THEMIS computer code. In the last part, the experimental validation of the proposed procedure (accurate formalism mutuel shielding and new multigroup library) is presented. This qualification is based on the reinterpretation of critical experiments performed in the EOLE reactor at Cadarache and spent fuel analysis. The corresponding results demonstrate that our propositions provide improvements on the computation of the PWR neutronic parameters; calculation-experiment discrepancies are now consistent with experimental uncertainty margins. 46 refs; 31 figs; 23 tabl [fr

Molecular Investigation of the Stem Snap Point in Textile Hemp

Directory of Open Access Journals (Sweden)

Marc Behr

2017-12-01

Full Text Available Fibre crops are important natural resources, as they sustainably provide bast fibres, an economically-valuable raw material used in the textile and biocomposite sectors. Among fibre crops, textile hemp (Cannabis sativa L. is appreciated for its long and strong gelatinous bast fibres. The stem of fibre crops is a useful system for cell wall-oriented studies, because it shows a strong tissue polarity with a lignified inner core and a cellulosic hypolignified cortex, as well as a basipetal lignification gradient. Along the stem axis of fibre crops, a specific region, denoted snap point, marks the transition from elongation (above it to fibre thickening (below it. After empirically determining the snap point by tilting the plant, we divided the stem segment containing it into three non-overlapping consecutive regions measuring 1 cm each, and carried out targeted RT-qPCR on cell wall-related genes separately, in outer and inner tissues. Different gene clusters can be observed, two of which are the major gene groups, i.e., one group with members expressed at higher levels in the inner tissues, and one group whose genes are more expressed in the cortex. The present results provide a molecular validation that the snap point is characterised by a gradient of events associated with the shift from fibre elongation to thickening.

NODAL3 Sensitivity Analysis for NEACRP 3D LWR Core Transient Benchmark (PWR

Directory of Open Access Journals (Sweden)

Surian Pinem

2016-01-01

Full Text Available This paper reports the results of sensitivity analysis of the multidimension, multigroup neutron diffusion NODAL3 code for the NEACRP 3D LWR core transient benchmarks (PWR. The code input parameters covered in the sensitivity analysis are the radial and axial node sizes (the number of radial node per fuel assembly and the number of axial layers, heat conduction node size in the fuel pellet and cladding, and the maximum time step. The output parameters considered in this analysis followed the above-mentioned core transient benchmarks, that is, power peak, time of power peak, power, averaged Doppler temperature, maximum fuel centerline temperature, and coolant outlet temperature at the end of simulation (5 s. The sensitivity analysis results showed that the radial node size and maximum time step give a significant effect on the transient parameters, especially the time of power peak, for the HZP and HFP conditions. The number of ring divisions for fuel pellet and cladding gives negligible effect on the transient solutions. For productive work of the PWR transient analysis, based on the present sensitivity analysis results, we recommend NODAL3 users to use 2×2 radial nodes per assembly, 1×18 axial layers per assembly, the maximum time step of 10 ms, and 9 and 1 ring divisions for fuel pellet and cladding, respectively.

A Multilevel Functional Study of a SNAP25 At-Risk Variant for Bipolar Disorder and Schizophrenia.

Science.gov (United States)

Houenou, Josselin; Boisgontier, Jennifer; Henrion, Annabelle; d'Albis, Marc-Antoine; Dumaine, Anne; Linke, Julia; Wessa, Michèle; Daban, Claire; Hamdani, Nora; Delavest, Marine; Llorca, Pierre-Michel; Lançon, Christophe; Schürhoff, Franck; Szöke, Andrei; Le Corvoisier, Philippe; Barau, Caroline; Poupon, Cyril; Etain, Bruno; Leboyer, Marion; Jamain, Stéphane

2017-10-25

The synaptosomal-associated protein SNAP25 is a key player in synaptic vesicle docking and fusion and has been associated with multiple psychiatric conditions, including schizophrenia, bipolar disorder, and attention-deficit/hyperactivity disorder. We recently identified a promoter variant in SNAP25 , rs6039769 , that is associated with early-onset bipolar disorder and a higher gene expression level in human prefrontal cortex. In the current study, we showed that this variant was associated both in males and females with schizophrenia in two independent cohorts. We then combined in vitro and in vivo approaches in humans to understand the functional impact of the at-risk allele. Thus, we showed in vitro that the rs6039769 C allele was sufficient to increase the SNAP25 transcription level. In a postmortem expression analysis of 33 individuals affected with schizophrenia and 30 unaffected control subjects, we showed that the SNAP25b / SNAP25a ratio was increased in schizophrenic patients carrying the rs6039769 at-risk allele. Last, using genetics imaging in a cohort of 71 subjects, we showed that male risk carriers had an increased amygdala-ventromedial prefrontal cortex functional connectivity and a larger amygdala than non-risk carriers. The latter association has been replicated in an independent cohort of 121 independent subjects. Altogether, results from these multilevel functional studies are bringing strong evidence for the functional consequences of this allelic variation of SNAP25 on modulating the development and plasticity of the prefrontal-limbic network, which therefore may increase the vulnerability to both early-onset bipolar disorder and schizophrenia. SIGNIFICANCE STATEMENT Functional characterization of disease-associated variants is a key challenge in understanding neuropsychiatric disorders and will open an avenue in the development of personalized treatments. Recent studies have accumulated evidence that the SNARE complex, and more specifically

Mercury concentrations in snapping turtles (Chelydra serpentina) correlate with environmental and landscape characteristics.

Science.gov (United States)

Turnquist, Madeline A; Driscoll, Charles T; Schulz, Kimberly L; Schlaepfer, Martin A

2011-10-01

Mercury (Hg) deposited onto the landscape can be transformed into methylmercury (MeHg), a neurotoxin that bioaccumulates up the aquatic food chain. Here, we report on Hg concentrations in snapping turtles (Chelydra serpentina) across New York State, USA. The objectives of this study were to: (1) test which landscape, water, and biometric characteristics correlate with total Hg (THg) concentrations in snapping turtles; and (2) determine whether soft tissue THg concentrations correlate with scute (shell) concentrations. Forty-eight turtles were sampled non-lethally from ten lakes and wetlands across New York to observe patterns under a range of ecosystem variables and water chemistry conditions. THg concentrations ranged from 0.041 to 1.50 μg/g and 0.47 to 7.43 μg/g wet weight of muscle tissue and shell, respectively. The vast majority of mercury (~94%) was in the MeHg form. Sixty-one percent of turtle muscle samples exceeded U.S. Environmental Protection Agency (U.S. EPA) consumption advisory limit of 0.3 μg Hg/g for fish. Muscle THg concentrations were significantly correlated with sulfate in water and the maximum elevation of the watershed. Shell THg concentrations were significantly correlated with the acid neutralizing capacity (ANC) of water, the maximum elevation of the watershed, the percent open water in the watershed, the lake to watershed size, and various forms of atmospheric Hg deposition. Thus, our results demonstrate that THg concentrations in snapping turtles are spatially variable, frequently exceed advisory limits, and are significantly correlated with several landscape and water characteristics.

FPDCYS and FPSPEC: computer programs for calculating fission-product beta and gamma multigroup spectra from ENDF/B-IV data

International Nuclear Information System (INIS)

Stamatelatos, M.G.; England, T.R.

1977-05-01

FPDCYS and FPSPEC are two FORTRAN computer programs used at the Los Alamos Scientific Laboratory (LASL), in conjunction with the CINDER-10 program, for calculating cumulative fission-product beta and/or gamma multigroup spectra in arbitrary energy structures, and for arbitrary neutron irradiation periods and cooling times. FPDCYS processes ENDF/B-IV fission-product decay energy data to generate multigroup beta and gamma spectra from individual ENDF/B-IV fission-product nuclides. FPSPEC further uses these spectra and the corresponding nuclide activities calculated by the CINDER-10 code to produce cumulative beta and gamma spectra in the same energy grids in which FPDCYS generates individual isotope decay spectra. The code system consisting of CINDER-10, FPDCYS, and FPSPEC has been used for comparisons with experimental spectra and continues to be used at LASL for generating spectra in special user-oriented group structures. 3 figures

ANSL-V: ENDF/B-V based multigroup cross-section libraries for Advanced Neutron Source (ANS) reactor studies

International Nuclear Information System (INIS)

Ford, W.E. III; Arwood, J.W.; Greene, N.M.; Petrie, L.M.; Primm, R.T. III; Waddell, M.W.; Webster, C.C.; Westfall, R.M.; Wright, R.Q.

1987-01-01

Multigroup P3 neutron, P0-P3 secondary gamma ray production (SGRP), and P6 gamma ray interaction (GRI) cross section libraries have been generated to support design work on the Advanced Neutron Source (ANS) reactor. The libraries, designated ANSL-V (Advanced Neutron Source Cross-Section Libraries), are data bases in a format suitable for subsequent generation of problem dependent cross sections. The ANSL-V libraries are available on magnetic tape from the Radiation Shielding Information Center at Oak Ridge National Laboratory

TWOTRAN-2, 2-D Multigroup Transport in X-Y, R-Z, R-Theta Geometry with Anisotropic Scattering

International Nuclear Information System (INIS)

Lathrop, K.D.; Brinkley, F.W.

1995-01-01

1 - Description of problem or function: TWOTRAN2 solves the two-dimensional multigroup transport equation in (x,y), (r,theta), and (r,z) geometries. Both regular and adjoint, inhomogeneous and homogeneous (k eff and eigenvalue searches) problems subject to vacuum, reflective, periodic, white or input-specified boundary flux conditions are solved. General anisotropic scattering is allowed and anisotropic inhomogeneous sources are permitted. 2 - Method of solution: The discrete ordinates approximation for the angular variable is used in finite difference form which is solved with the central (diamond) difference approximation. Negative fluxes are eliminated by a local set-to zero and correct algorithm. Standard inner (within-group) and outer iterative cycles are accelerated by a coarse-mesh re-balancing on a coarse mesh which may be independent of the material mesh. 3 - Restrictions on the complexity of the problem: Variable dimensioning is used so that any combination of problem parameters leading to a container array less than MAXLEN can be accommodated. On IBM machines, TWOTRAN2 will execute in the 4-byte mode so that any combination of problem parameters leading to a container array less than MAXLEN can be accommodated. MAXLEN can be several hundred thousand and most problems can be core-contained. On the CDC machines MAXLEN can be slightly greater than 40,000 words and peripheral storage is used for most group-dependent data

The LAW Library -- A multigroup cross-section library for use in radioactive waste analysis calculations

International Nuclear Information System (INIS)

Greene, N.M.; Arwood, J.W.; Wright, R.Q.; Parks, C.V.

1994-08-01

The 238-group LAW Library is a new multigroup neutron cross-section library based on ENDF/B-V data, with five sets of data taken from ENDF/B-VI ( 14 N 7 , 15 N 7 , 16 O 8 , 154Eu 63 , and 155 Eu 63 ). These five nuclides are included because the new evaluations are thought to be superior to those in Version 5. The LAW Library contains data for over 300 materials and will be distributed by the Radiation Shielding Information Center, located at Oak Ridge National Laboratory. It was generated for use in neutronics calculations required in radioactive waste analyses, although it has equal utility in any study requiring multigroup neutron cross sections

New adaptive differencing strategy in the PENTRAN 3-d parallel Sn code

International Nuclear Information System (INIS)

Sjoden, G.E.; Haghighat, A.

1996-01-01

It is known that three-dimensional (3-D) discrete ordinates (S n ) transport problems require an immense amount of storage and computational effort to solve. For this reason, parallel codes that offer a capability to completely decompose the angular, energy, and spatial domains among a distributed network of processors are required. One such code recently developed is PENTRAN, which iteratively solves 3-D multi-group, anisotropic S n problems on distributed-memory platforms, such as the IBM-SP2. Because large problems typically contain several different material zones with various properties, available differencing schemes should automatically adapt to the transport physics in each material zone. To minimize the memory and message-passing overhead required for massively parallel S n applications, available differencing schemes in an adaptive strategy should also offer reasonable accuracy and positivity, yet require only the zeroth spatial moment of the transport equation; differencing schemes based on higher spatial moments, in spite of their greater accuracy, require at least twice the amount of storage and communication cost for implementation in a massively parallel transport code. This paper discusses a new adaptive differencing strategy that uses increasingly accurate schemes with low parallel memory and communication overhead. This strategy, implemented in PENTRAN, includes a new scheme, exponential directional averaged (EDA) differencing

Automatically tuned adaptive differencing algorithm for 3-D SN implemented in PENTRAN

International Nuclear Information System (INIS)

Sjoden, G.; Courau, T.; Manalo, K.; Yi, C.

2009-01-01

We present an adaptive algorithm with an automated tuning feature to augment optimum differencing scheme selection for 3-D S N computations in Cartesian geometry. This adaptive differencing scheme has been implemented in the PENTRAN parallel S N code. Individual fixed zeroth spatial transport moment based schemes, including Diamond Zero (DZ), Directional Theta Weighted (DTW), and Exponential Directional Iterative (EDI) 3-D S N methods were evaluated and compared with solutions generated using a code-tuned adaptive algorithm. Model problems considered include a fixed source slab problem (using reflected y- and z-axes) which contained mixed shielding and diffusive regions, and a 17 x 17 PWR assembly eigenvalue test problem; these problems were benchmarked against multigroup MCNP5 Monte Carlo computations. Both problems were effective in highlighting the performance of the adaptive scheme compared to single schemes, and demonstrated that the adaptive tuning handles exceptions to the standard DZ-DTW-EDI adaptive strategy. The tuning feature includes special scheme selection provisions for optically thin cells, and incorporates the ratio of the angular source density relative to the total angular collision density to best select the differencing method. Overall, the adaptive scheme demonstrated the best overall solution accuracy in the test problems. (authors)

multiple disease resistance in snap bean genotypes in kenya

African Journals Online (AJOL)

Prof. Adipala Ekwamu

Department of Plant Science and Crop Protection, University of Nairobi, P. O. Box 29053- ... Agriculture (CIAT), National Agricultural Research Laboratories Institute, ... Climbing snap bean lines had thick pods that could reduce pod quality. ... MATERIALS AND METHODS ... were harvested in sterile distilled water and spore.

Finally! A valid test of configural invariance using permutation in multigroup CFA

NARCIS (Netherlands)

Jorgensen, T.D.; Kite, B.A.; Chen, P.-Y.; Short, S.D.; van der Ark, L.A.; Wiberg, M.; Culpepper, S.A.; Douglas, J.A.; Wang, W.-C.

2017-01-01

In multigroup factor analysis, configural measurement invariance is accepted as tenable when researchers either (a) fail to reject the null hypothesis of exact fit using a χ2 test or (b) conclude that a model fits approximately well enough, according to one or more alternative fit indices (AFIs).

RGENDF - An interface program between the NJOY code and codes using multigroup cross-sections

International Nuclear Information System (INIS)

Chalhoub, E.S.; Anaf, J.

1988-02-01

An interface program for reformatting multigroup cross-section libraries generated by NJOY into ENDF/B-V format and the EXPANDA, PFCOND and COMPAR input formats is presented. (author). 7 refs, 1 fig., 1 tab

SNAP-Ed (Supplemental Nutrition Assistance Program-Education) Increases Long-Term Food Security among Indiana Households with Children in a Randomized Controlled Study.

Science.gov (United States)

Rivera, Rebecca L; Maulding, Melissa K; Abbott, Angela R; Craig, Bruce A; Eicher-Miller, Heather A

2016-11-01

Food insecurity is negatively associated with US children's dietary intake and health. The Supplemental Nutrition Assistance Program-Education (SNAP-Ed) aims to alleviate food insecurity by offering nutrition, budgeting, and healthy lifestyle education to low-income individuals and families. The objective of this study was to evaluate the long-term impact of the Indiana SNAP-Ed on food security among households with children. A randomized, controlled, parallel study design with SNAP-Ed as an intervention was carried out during a 4- to 10-wk intervention period. Intervention group participants received the first 4 Indiana SNAP-Ed curriculum lessons. Study participants (n = 575) were adults aged ≥18 y from low-income Indiana households with ≥1 child living in the household. Both treatment groups completed an assessment before and after the intervention period and 1 y after recruitment. The 18-item US Household Food Security Survey Module was used to classify the primary outcomes of food security for the household and adults and children in the household. A linear mixed model was used to compare intervention with control group effects over time on food security. Mean ± SEM changes in household food security score and food security score among household adults from baseline to 1-y follow-up were 1.2 ± 0.4 and 0.9 ± 0.3 units lower, respectively, in the intervention group than in the control group (P security score from baseline to 1-y follow-up among household children was not significantly different in the intervention group compared with the control group. SNAP-Ed improved food security over a longitudinal time frame among low-income Indiana households with children in this study. SNAP-Ed may be a successful intervention to improve food security. © 2016 American Society for Nutrition.

Tuning and switching of band gap of the periodically undulated beam by the snap through buckling

Directory of Open Access Journals (Sweden)

Y. Li

2017-05-01

Full Text Available We propose highly tuning and switching band gaps of phononic crystals through the snap through buckling by investigating wave propagation in a designed tractable undulated beam with single material and periodically arched shape. A series of numerical analyses are conducted to offer a thorough understanding of the evolution of the band gaps as a function of the vertical applied load. We find out that the interesting snap through buckling induced by the vertical load can alter the width of the band gap of the undulated beam dramatically, even switch them on and off. Our researches show an effective strategy to tune the band gaps of phononic crystals through the snap through buckling behavior.

The physiology of overwintering in a turtle that occupies multiple habitats, the common snapping turtle (Chelydra serpentina).

Science.gov (United States)

Reese, Scott A; Jackson, Donald C; Ultsch, Gordon R

2002-01-01

Common snapping turtles, Chelydra serpentina (Linnaeus), were submerged in anoxic and normoxic water at 3 degrees C. Periodic blood samples were taken, and PO(2), PCO(2), pH, [Na(+)], [K(+)], [Cl(-)], total Ca, total Mg, [lactate], [glucose], hematocrit, and osmolality were measured; weight gain was determined; and plasma [HCO(3)(-)] was calculated. Submergence in normoxic water caused a decrease in PCO(2) from 10.8 to 6.9 mmHg after 125 d, partially compensating a slight increase in lactate and allowing the turtles to maintain a constant pH. Submergence in anoxic water caused a rapid increase in lactate from 1.8 to 168.1 mmol/L after 100 d. Associated with the increased lactate were decreases in pH from 8.057 to 7.132 and in [HCO(3)(-)] from 51.5 to 4.9 mmol/L and increases in total Ca from 2.0 to 36.6 mmol/L, in total Mg from 1.8 to 12.1 mmol/L, and in [K(+)] from 3.08 to 8.45 mmol/L. We suggest that C. serpentina is tolerant of anoxic submergence and therefore is able to exploit habitats unavailable to some other species in northern latitudes.

ESELEM 4: a code for calculating fine neutron spectrum and multi-group cross sections in plate lattice

International Nuclear Information System (INIS)

Nakagawa, Masayuki; Katsuragi, Satoru; Narita, Hideo.

1976-07-01

The multi-group treatment has been used in the design study of fast reactors and analysis of experiments at fast critical assemblies. The accuracy of the multi-group cross sections therefore affects strongly the results of these analyses. The ESELEM 4 code has been developed to produce multi-group cross sections with an advanced method from the nuclear data libraries used in the JAERI Fast set. ESELEM 4 solves integral transport equation by the collision probability method in plate lattice geometry to obtain the fine neutron spectrum. A typical fine group mesh width is 0.008 in lethargy unit. The multi-group cross sections are calculated by weighting the point data with the fine structure neutron flux. Some devices are applied to reduce computation time and computer core storage required for the calculation. The slowing down sources are calculated with the use of a recurrence formula derived for elastic and inelastic scattering. The broad group treatment is adopted above 2 MeV for dealing with both light any heavy elements. Also the resonance cross sections of heavy elements are represented in a broad group structure, for which we use the values of the JAERI Fast set. The library data are prepared by the PRESM code from ENDF/A type nuclear data files. The cross section data can be compactly stored in the fast computer core memory for saving the core storage and data processing time. The programme uses the variable dimensions to increase its flexibility. The users' guide for ESELEM 4 and PRESM is also presented in this report. (auth.)

Synaptotagmin-7 Is an Asynchronous Calcium Sensor for Synaptic Transmission in Neurons Expressing SNAP-23

DEFF Research Database (Denmark)

Weber, Jens P; Toft-Bertelsen, Trine L; Mohrmann, Ralf

2014-01-01

Synchronization of neurotransmitter release with the presynaptic action potential is essential for maintaining fidelity of information transfer in the central nervous system. However, synchronous release is frequently accompanied by an asynchronous release component that builds up during repetitive...... stimulation, and can even play a dominant role in some synapses. Here, we show that substitution of SNAP-23 for SNAP-25 in mouse autaptic glutamatergic hippocampal neurons results in asynchronous release and a higher frequency of spontaneous release events (mEPSCs). Use of neurons from double-knock-out (SNAP......, while synaptotagmin-7 barely displayed activity-dependent trafficking between vesicle and plasma membrane, implying that it acts as a plasma membrane calcium sensor. Overall, these findings support the idea of alternative syt∶SNARE combinations driving release with different kinetics and fidelity....

Variational P1 approximations of general-geometry multigroup transport problems

International Nuclear Information System (INIS)

Rulko, R.P.; Tomasevic, D.; Larsen, E.W.

1995-01-01

A variational approximation is developed for general-geometry multigroup transport problems with arbitrary anisotropic scattering. The variational principle is based on a functional that approximates a reaction rate in a subdomain of the system. In principle, approximations that result from this functional ''optimally'' determine such reaction rates. The functional contains an arbitrary parameter α and requires the approximate solutions of a forward and an adjoint transport problem. If the basis functions for the forward and adjoint solutions are chosen to be linear functions of the angular variable Ω, the functional yields the familiar multigroup P 1 equations for all values of α. However, the boundary conditions that result from the functional depend on α. In particular, for problems with vacuum boundaries, one obtains the conventional mixed boundary condition, but with an extrapolation distance that depends continuously on α. The choice α = 0 yields a generalization of boundary conditions derived earlier by Federighi and Pomraning for a more limited class of problems. The choice α = 1 yields a generalization of boundary conditions derived previously by Davis for monoenergetic problems. Other boundary conditions are obtained by choosing different values of α. The authors discuss this indeterminancy of α in conjunction with numerical experiments

Contribution to the solution of the multigroup Boltzmann equation by the determinist methods and the Monte Carlo method; Contribution a la resolution de l`equation de Bolztmann en multigroupe par les methodes deterministes et Monte-Carlo

Energy Technology Data Exchange (ETDEWEB)

Li, M

1998-08-01

In this thesis, two methods for solving the multigroup Boltzmann equation have been studied: the interface-current method and the Monte Carlo method. A new version of interface-current (IC) method has been develop in the TDT code at SERMA, where the currents of interface are represented by piecewise constant functions in the solid angle space. The convergence of this method to the collision probability (CP) method has been tested. Since the tracking technique is used for both the IC and CP methods, it is necessary to normalize he collision probabilities obtained by this technique. Several methods for this object have been studied and implemented in our code, we have compared their performances and chosen the best one as the standard choice. The transfer matrix treatment has been a long-standing difficulty for the multigroup Monte Carlo method: when the cross-sections are converted into multigroup form, important negative parts will appear in the angular transfer laws represented by low-order Legendre polynomials. Several methods based on the preservation of the first moments, such as the discrete angles methods and the equally-probable step function method, have been studied and implemented in the TRIMARAN-II code. Since none of these codes has been satisfactory, a new method, the non equally-probably step function method, has been proposed and realized in our code. The comparisons for these methods have been done in several aspects: the preservation of the moments required, the calculation of a criticality problem and the calculation of a neutron-transfer in water problem. The results have showed that the new method is the best one in all these comparisons, and we have proposed that it should be a standard choice for the multigroup transfer matrix. (author) 76 refs.

Determinatio of Psychometrics Index of SNAP-IV Rating Scale in Parents Execution

Directory of Open Access Journals (Sweden)

Seyyed Jalal Sadrosadat

2008-01-01

Full Text Available Objective: SNAP-IV rating scale to diagnosis Attention Deficit Hyperactivity Disorder (ADHD developed by Swanson, Nolan and Pelham. The aim of this study is determination of psychometrics specifications of this scale. Materials & Methods: This Descriptive research is a methodological, applied and validity assessment study. One thousand students at 7 to 12 age of primary school in Tehran city were selected by cluster sampling. Then the students mothers was asked to complete rating scale to consider behavior of their children.30 staff members of sample group were retest after one mounts. Diagnostic interview was administered at 36 members of sample group. Data were analyzed by using pearsonian correlation coefficient, Kolmogorof – Smirnoff and Behrens – Fisher T test. Results: Criterion validity was 48%, factor analysis was detected 3 factors that explain 56% of the total variance. Reliability coefficient was 82% . internal consistency coefficient was 90% and split –half coefficient was 76%, Cut-off point in scale and subscales was 1.57,1.47 and 1.9 respectively. Conclusion: The SNAP-IV Rating scales have fit psychometrics specifications. Therefore, it is useable in various diagnostic and therapeutic conditioning.

The amino acid sequence of snapping turtle (Chelydra serpentina) ribonuclease

NARCIS (Netherlands)

Beintema, Jacob; Broos, Jaap; Meulenberg, Janneke; Schüller, Cornelis

1985-01-01

Snapping turtle (Chelydra serpentina) ribonuclease was isolated from pancreatic tissue. Turtle ribonuclease binds much more weakly to the affinity chromatography matrix used than mammalian ribonucleases. The amino acid sequence was determined from overlapping peptides obtained from three different

SnapShot: Phosphoregulation of Mitosis.

Science.gov (United States)

Burgess, Andrew; Vuong, Jenny; Rogers, Samuel; Malumbres, Marcos; O'Donoghue, Seán I

2017-06-15

During mitosis, a cell divides its duplicated genome into two identical daughter cells. This process must occur without errors to prevent proliferative diseases (e.g., cancer). A key mechanism controlling mitosis is the precise timing of more than 32,000 phosphorylation and dephosphorylation events by a network of kinases and counterbalancing phosphatases. The identity, magnitude, and temporal regulation of these events have emerged recently, largely from advances in mass spectrometry. Here, we show phosphoevents currently believed to be key regulators of mitosis. For an animated version of this SnapShot, please see http://www.cell.com/cell/enhanced/odonoghue2. Copyright © 2017. Published by Elsevier Inc.

Intra-articular lipoma causing snapping in the patellofemoral joint

International Nuclear Information System (INIS)

Yilmaz, E.; Karakurt, L.; Yildirim, H.; Ozercan, R.

2007-01-01

Intra-articular lipoma is an exceedingly rare diagnosis. We identified a lipoma that was seated in the retropatellar are and caused snapping of the patella during flexion of the knee joint. The tumor was easily and totally excised under arthroscopic guidance after the thin pedicle was cut. (author)

SnapShot: Fanconi anemia and associated proteins.

Science.gov (United States)

Wang, Anderson T; Smogorzewska, Agata

2015-01-15

Fanconi anemia is a genetic disorder resulting from biallelic mutations in one of the 17 FANC genes. It is characterized by congenital abnormalities, bone marrow failure, and cancer predisposition. The underlying cause is genomic instability resulting from the deficiency in replication-dependent DNA interstrand crosslink repair pathway commonly referred to as the Fanconi anemia-BRCA pathway. This SnapShot presents the key factors involved. Copyright © 2015 Elsevier Inc. All rights reserved.

Status of multigroup cross-section data for shielding applications

International Nuclear Information System (INIS)

Roussin, R.W.; Maskewitz, B.F.; Trubey, D.K.

1983-01-01

Multigroup cross-section libraries for shielding applications in formats for direct use in discrete ordinates or Monte Carlo codes have long been a part of the Data Library Collection (DLC) of the Radiation Shielding Information Center (RSIC). In recent years libraries in more flexible and comprehensive formats, which allow the user to derive his own problem-dependent sets, have been added to the collection. The current status of both types is described, as well as projections for adding data libraries based on ENDF/B-V

Reflective Polyethylene Mulch Reduces Mexican Bean Beetle (Coleoptera: Coccinellidae) Densities and Damage in Snap Beans.

Science.gov (United States)

Nottingham, L B; Kuhar, T P

2016-08-01

Mexican bean beetle, Epilachna varivestis Mulsant, is a serious pest of snap beans, Phaseolus vulgaris L., in the eastern United States. These beetles are intolerant to direct sunlight, explaining why individuals are typically found on the undersides of leaves and in the lower portion of the plant canopy. We hypothesized that snap beans grown on reflective, agricultural polyethylene (plastic mulch) would have fewer Mexican bean beetles and less injury than those grown on black plastic or bare soil. In 2014 and 2015, beans were seeded into beds of metallized, white, and black plastic, and bare soil, in field plots near Blacksburg, VA. Mexican bean beetle density, feeding injury, predatory arthropods, and snap bean yield were sampled. Reflected light intensity, temperature, and humidity were monitored using data loggers. Pyranometer readings showed that reflected light intensity was highest over metallized plastic and second highest over white plastic; black plastic and bare soil were similarly low. Temperature and humidity were unaffected by treatments. Significant reductions in Mexican bean beetle densities and feeding injury were observed in both metallized and white plastic plots compared to black plastic and bare soil, with metallized plastic having the fewest Mexican bean beetle life stages and injury. Predatory arthropod densities were not reduced by reflective plastic. Metallized plots produced the highest yields, followed by white. The results of this study suggest that growing snap beans on reflective plastic mulch can suppress the incidence and damage of Mexican bean beetle, and increase yield in snap beans. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A fluorogenic probe for SNAP-tagged plasma membrane proteins based on the solvatochromic molecule Nile Red.

Science.gov (United States)

Prifti, Efthymia; Reymond, Luc; Umebayashi, Miwa; Hovius, Ruud; Riezman, Howard; Johnsson, Kai

2014-03-21

A fluorogenic probe for plasma membrane proteins based on the dye Nile Red and SNAP-tag is introduced. It takes advantage of Nile Red, a solvatochromic molecule highly fluorescent in an apolar environment, such as cellular membranes, but almost dark in a polar aqueous environment. The probe possesses a tuned affinity for membranes allowing its Nile Red moiety to insert into the lipid bilayer of the plasma membrane, becoming fluorescent, only after its conjugation to a SNAP-tagged plasma membrane protein. The fluorogenic character of the probe was demonstrated for different SNAP-tag fusion proteins, including the human insulin receptor. This work introduces a new approach for generating a powerful turn-on probe for "no-wash" labeling of plasma membrane proteins with numerous applications in bioimaging.

Snapping scapular syndrome secondary to rib intramedullary fixation device

Directory of Open Access Journals (Sweden)

Ezequiel E. Zaidenberg

2015-01-01

Conclusion: Surgeons should pay attention to any protrusion of intramedullary rib implants, especially in the evaluation of routine X-rays following surgical treatment. We should be aware of the possibility of this rare cause of snapping scapula syndrome to avoid delayed diagnosis and consider removing the implant will resolve the pain.

Study of an integral field spectrograph for the SNAP satellite. Prototype, simulation and performances

International Nuclear Information System (INIS)

Aumeunier, Marie-Helene

2007-01-01

The SNAP (Supernovae/Acceleration Probe) project plans to measure very precisely the cosmological parameters and to determine the nature of dark energy by observations of type Ia supernovae and weak lensing. The SNAP instrument consists in a 2-meter telescope with a one square-degree imager and a spectrograph in the visible and infrared range. A dedicated optimized integral field spectrograph based on an imager slicer technology has been developed. To test and validate the performances, two approaches have been developed: a complete simulation of the complete instrument at the pixel level and the manufacturing and test of a spectrograph prototype operating at room temperature and in cryogenic environment. In this thesis we will test the optical and functional performances of the SNAP spectrograph: especially diffraction losses, stray-light and spectro-photometric calibration. We present an original approach for the spectro-photometric calibration adapted for the slicer and the optical performances resulting from the first measurement campaign in the visible range. (author) [fr

Septin 7 reduces nonmuscle myosin IIA activity in the SNAP23 complex and hinders GLUT4 storage vesicle docking and fusion

Energy Technology Data Exchange (ETDEWEB)

Wasik, Anita A.; Dumont, Vincent [Department of Pathology, University of Helsinki, 00014 Helsinki (Finland); Tienari, Jukka [Department of Pathology, University of Helsinki and Helsinki University Hospital, 00290 Helsinki, 05850 Hyvinkää (Finland); Nyman, Tuula A. [Institute of Biotechnology, University of Helsinki, 00014 Helsinki (Finland); Fogarty, Christopher L.; Forsblom, Carol; Lehto, Markku [Folkhälsan Institute of Genetics, Folkhälsan Research Center, 00290 Helsinki (Finland); Abdominal Center Nephrology, University of Helsinki and Helsinki University Hospital, 000290 Helsinki (Finland); Diabetes& Obesity Research Program, Research Program´s Unit, 00014 University of Helsinki (Finland); Lehtonen, Eero [Department of Pathology, University of Helsinki, 00014 Helsinki (Finland); Laboratory Animal Centre, University of Helsinki, 00014 Helsinki (Finland); Groop, Per-Henrik [Folkhälsan Institute of Genetics, Folkhälsan Research Center, 00290 Helsinki (Finland); Abdominal Center Nephrology, University of Helsinki and Helsinki University Hospital, 000290 Helsinki (Finland); Diabetes& Obesity Research Program, Research Program´s Unit, 00014 University of Helsinki (Finland); Baker IDI Heart & Diabetes Institute, 3004 Melbourne (Australia); Lehtonen, Sanna, E-mail: sanna.h.lehtonen@helsinki.fi [Department of Pathology, University of Helsinki, 00014 Helsinki (Finland)

2017-01-15

Glomerular epithelial cells, podocytes, are insulin responsive and can develop insulin resistance. Here, we demonstrate that the small GTPase septin 7 forms a complex with nonmuscle myosin heavy chain IIA (NMHC-IIA; encoded by MYH9), a component of the nonmuscle myosin IIA (NM-IIA) hexameric complex. We observed that knockdown of NMHC-IIA decreases insulin-stimulated glucose uptake into podocytes. Both septin 7 and NM-IIA associate with SNAP23, a SNARE protein involved in GLUT4 storage vesicle (GSV) docking and fusion with the plasma membrane. We observed that insulin decreases the level of septin 7 and increases the activity of NM-IIA in the SNAP23 complex, as visualized by increased phosphorylation of myosin regulatory light chain. Also knockdown of septin 7 increases the activity of NM-IIA in the complex. The activity of NM-IIA is increased in diabetic rat glomeruli and cultured human podocytes exposed to macroalbuminuric sera from patients with type 1 diabetes. Collectively, the data suggest that the activity of NM-IIA in the SNAP23 complex plays a key role in insulin-stimulated glucose uptake into podocytes. Furthermore, we observed that septin 7 reduces the activity of NM-IIA in the SNAP23 complex and thereby hinders GSV docking and fusion with the plasma membrane. - Highlights: • Septin 7, nonmuscle myosin heavy chain IIA (NMHC-IIA) and SNAP23 form a complex. • Knockdown of septin 7 increases NM-IIA activity in the SNAP23 complex. • Insulin decreases septin 7 level and increases NM-IIA activity in the SNAP23 complex. • Septin 7 hinders GSV docking/fusion by reducing NM-IIA activity in the SNAP23 complex.

Septin 7 reduces nonmuscle myosin IIA activity in the SNAP23 complex and hinders GLUT4 storage vesicle docking and fusion

International Nuclear Information System (INIS)

Wasik, Anita A.; Dumont, Vincent; Tienari, Jukka; Nyman, Tuula A.; Fogarty, Christopher L.; Forsblom, Carol; Lehto, Markku; Lehtonen, Eero; Groop, Per-Henrik; Lehtonen, Sanna

2017-01-01

Glomerular epithelial cells, podocytes, are insulin responsive and can develop insulin resistance. Here, we demonstrate that the small GTPase septin 7 forms a complex with nonmuscle myosin heavy chain IIA (NMHC-IIA; encoded by MYH9), a component of the nonmuscle myosin IIA (NM-IIA) hexameric complex. We observed that knockdown of NMHC-IIA decreases insulin-stimulated glucose uptake into podocytes. Both septin 7 and NM-IIA associate with SNAP23, a SNARE protein involved in GLUT4 storage vesicle (GSV) docking and fusion with the plasma membrane. We observed that insulin decreases the level of septin 7 and increases the activity of NM-IIA in the SNAP23 complex, as visualized by increased phosphorylation of myosin regulatory light chain. Also knockdown of septin 7 increases the activity of NM-IIA in the complex. The activity of NM-IIA is increased in diabetic rat glomeruli and cultured human podocytes exposed to macroalbuminuric sera from patients with type 1 diabetes. Collectively, the data suggest that the activity of NM-IIA in the SNAP23 complex plays a key role in insulin-stimulated glucose uptake into podocytes. Furthermore, we observed that septin 7 reduces the activity of NM-IIA in the SNAP23 complex and thereby hinders GSV docking and fusion with the plasma membrane. - Highlights: • Septin 7, nonmuscle myosin heavy chain IIA (NMHC-IIA) and SNAP23 form a complex. • Knockdown of septin 7 increases NM-IIA activity in the SNAP23 complex. • Insulin decreases septin 7 level and increases NM-IIA activity in the SNAP23 complex. • Septin 7 hinders GSV docking/fusion by reducing NM-IIA activity in the SNAP23 complex.

Longitudinal multigroup invariance analysis of the satisfaction with food-related life scale in university students.

Science.gov (United States)

Schnettler, Berta; Miranda, Horacio; Miranda-Zapata, Edgardo; Salinas-Oñate, Natalia; Grunert, Klaus G; Lobos, Germán; Sepúlveda, José; Orellana, Ligia; Hueche, Clementina; Bonilla, Héctor

2017-06-01

This study examined longitudinal measurement invariance in the Satisfaction with Food-related Life (SWFL) scale using follow-up data from university students. We examined this measure of the SWFL in different groups of students, separated by various characteristics. Through non-probabilistic longitudinal sampling, 114 university students (65.8% female, mean age: 22.5) completed the SWFL questionnaire three times, over intervals of approximately one year. Confirmatory factor analysis was used to examine longitudinal measurement invariance. Two types of analysis were conducted: first, a longitudinal invariance by time, and second, a multigroup longitudinal invariance by sex, age, socio-economic status and place of residence during the study period. Results showed that the 3-item version of the SWFL exhibited strong longitudinal invariance (equal factor loadings and equal indicator intercepts). Longitudinal multigroup invariance analysis also showed that the 3-item version of the SWFL displays strong invariance by socio-economic status and place of residence during the study period over time. Nevertheless, it was only possible to demonstrate equivalence of the longitudinal factor structure among students of both sexes, and among those older and younger than 22 years. Generally, these findings suggest that the SWFL scale has satisfactory psychometric properties for longitudinal measurement invariance in university students with similar characteristics as the students that participated in this research. It is also possible to suggest that satisfaction with food-related life is associated with sex and age. Copyright © 2017 Elsevier Ltd. All rights reserved.

Global dynamics of multi-group SEI animal disease models with indirect transmission

International Nuclear Information System (INIS)

Wang, Yi; Cao, Jinde

2014-01-01

A challenge to multi-group epidemic models in mathematical epidemiology is the exploration of global dynamics. Here we formulate multi-group SEI animal disease models with indirect transmission via contaminated water. Under biologically motivated assumptions, the basic reproduction number R 0 is derived and established as a sharp threshold that completely determines the global dynamics of the system. In particular, we prove that if R 0 <1, the disease-free equilibrium is globally asymptotically stable, and the disease dies out; whereas if R 0 >1, then the endemic equilibrium is globally asymptotically stable and thus unique, and the disease persists in all groups. Since the weight matrix for weighted digraphs may be reducible, the afore-mentioned approach is not directly applicable to our model. For the proofs we utilize the classical method of Lyapunov, graph-theoretic results developed recently and a new combinatorial identity. Since the multiple transmission pathways may correspond to the real world, the obtained results are of biological significance and possible generalizations of the model are also discussed

SnapAnatomy, a computer-based interactive tool for independent learning of human anatomy.

Science.gov (United States)

Yip, George W; Rajendran, Kanagasuntheram

2008-06-01

Computer-aided instruction materials are becoming increasing popular in medical education and particularly in the teaching of human anatomy. This paper describes SnapAnatomy, a new interactive program that the authors designed for independent learning of anatomy. SnapAnatomy is primarily tailored for the beginner student to encourage the learning of anatomy by developing a three-dimensional visualization of human structure that is essential to applications in clinical practice and the understanding of function. The program allows the student to take apart and to accurately put together body components in an interactive, self-paced and variable manner to achieve the learning outcome.

SnapShot: Hormones of the gastrointestinal tract.

Science.gov (United States)

Coate, Katie C; Kliewer, Steven A; Mangelsdorf, David J

2014-12-04

Specialized endocrine cells secrete a variety of peptide hormones all along the gastrointestinal (GI) tract, making it one of the largest endocrine organs in the body. Nutrients and developmental and neural cues trigger the secretion of gastrointestinal (GI) hormones from specialized endocrine cells along the GI tract. These hormones act in target tissues to facilitate digestion and regulate energy homeostasis. This SnapShot summarizes the production and functions of GI hormones. Copyright © 2014 Elsevier Inc. All rights reserved.

Programs Lucky and LuckyC - 3D parallel transport codes for the multi-group transport equation solution for XYZ geometry by Pm Sn method

International Nuclear Information System (INIS)

Moriakov, A.; Vasyukhno, V.; Netecha, M.; Khacheresov, G.

2003-01-01

Powerful supercomputers are available today. MBC-1000M is one of Russian supercomputers that may be used by distant way access. Programs LUCKY and LUCKY C were created to work for multi-processors systems. These programs have algorithms created especially for these computers and used MPI (message passing interface) service for exchanges between processors. LUCKY may resolved shielding tasks by multigroup discreet ordinate method. LUCKY C may resolve critical tasks by same method. Only XYZ orthogonal geometry is available. Under little space steps to approximate discreet operator this geometry may be used as universal one to describe complex geometrical structures. Cross section libraries are used up to P8 approximation by Legendre polynomials for nuclear data in GIT format. Programming language is Fortran-90. 'Vector' processors may be used that lets get a time profit up to 30 times. But unfortunately MBC-1000M has not these processors. Nevertheless sufficient value for efficiency of parallel calculations was obtained under 'space' (LUCKY) and 'space and energy' (LUCKY C ) paralleling. AUTOCAD program is used to control geometry after a treatment of input data. Programs have powerful geometry module, it is a beautiful tool to achieve any geometry. Output results may be processed by graphic programs on personal computer. (authors)

SNAP dendrimers: multivalent protein display on dendrimer-like DNA for directed evolution.

Science.gov (United States)

Kaltenbach, Miriam; Stein, Viktor; Hollfelder, Florian

2011-09-19

Display systems connect a protein with the DNA encoding it. Such systems (e.g., phage or ribosome display) have found widespread application in the directed evolution of protein binders and constitute a key element of the biotechnological toolkit. In this proof-of-concept study we describe the construction of a system that allows the display of multiple copies of a protein of interest in order to take advantage of avidity effects during affinity panning. To this end, dendrimer-like DNA is used as a scaffold with docking points that can join the coding DNA with multiple protein copies. Each DNA construct is compartmentalised in water-in-oil emulsion droplets. The corresponding protein is expressed, in vitro, inside the droplets as a SNAP-tag fusion. The covalent bond between DNA and the SNAP-tag is created by reaction with dendrimer-bound benzylguanine (BG). The ability to form dendrimer-like DNA straightforwardly from oligonucleotides bearing BG allowed the comparison of a series of templates differing in size, valency and position of BG. In model selections the most efficient constructs show recoveries of up to 0.86 % and up to 400-fold enrichments. The comparison of mono- and multivalent constructs suggests that the avidity effect enhances enrichment by up to fivefold and recovery by up to 25-fold. Our data establish a multivalent format for SNAP-display based on dendrimer-like DNA as the first in vitro display system with defined tailor-made valencies and explore a new application for DNA nanostructures. These data suggest that multivalent SNAP dendrimers have the potential to facilitate the selection of protein binders especially during early rounds of directed evolution, allowing a larger diversity of candidate binders to be recovered. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparison of a mouse and a novel human scFv-SNAP-auristatin F drug conjugate with potent activity against EGFR-overexpressing human solid tumor cells

Directory of Open Access Journals (Sweden)

Woitok M

2017-07-01

Full Text Available Mira Woitok,1,2 Diana Klose,1 Stefano Di Fiore,1 Wolfgang Richter,3 Christoph Stein,1 Gerrit Gresch,1 Elena Grieger,1 Stefan Barth,1 Rainer Fischer,1,2 Katharina Kolberg,1,* Judith Niesen1,* 1Fraunhofer Institute for Molecular Biology and Applied Ecology (IME, Aachen, Germany; 2Institute of Molecular Biotechnology (Biology VII, RWTH Aachen University, Aachen, Germany; 3Tube Pharmaceuticals GmbH, Vienna, Austria *These authors contributed equally to this work Abstract: Antibody–drug conjugates (ADCs can deliver toxins to specific targets such as tumor cells. They have shown promise in preclinical/clinical development but feature stoichiometrically undefined chemical linkages, and those based on full-size antibodies achieve only limited tumor penetration. SNAP-tag technology can overcome these challenges by conjugating benzylguanine-modified toxins to single-chain fragment variables (scFvs with 1:1 stoichio­metry while preserving antigen binding. Two (human and mouse scFv-SNAP fusion proteins recognizing the epidermal growth factor receptor (EGFR were expressed in HEK 293T cells. The purified fusion proteins were conjugated to auristatin F (AURIF. Binding activity was confirmed by flow cytometry/immunohistochemistry, and cytotoxic activity was confirmed by cell viability/apoptosis and cell cycle arrest assays, and a novel microtubule dynamics disassembly assay was performed. Both ADCs bound specifically to their target cells in vitro and ex vivo, indicating that the binding activity of the scFv-SNAP fusions was unaffected by conjugation to AURIF. Cytotoxic assays confirmed that the ADCs induced apoptosis and cell cycle arrest at nanomolar concentrations and microtubule disassembly. The SNAP-tag technology provides a platform for the development of novel ADCs with defined conjugation sites and stoichiometry. We achieved the stable and efficient linkage of AURIF to human or murine scFvs using the SNAP-tag technology, offering a strategy to

Toward the topology design of mechanisms that exhibit snap-through behavior

DEFF Research Database (Denmark)

Burns, T. E.; Sigmund, Ole

2004-01-01

Topology optimization has proven to be a powerful method for the conceptual design of structures and mechanisms. In previously published work, we concentrated on the development of numerical methods that accommodate the finite deformation and incorporated these analyses into the topology...... optimization. We demonstrated by relatively straightforward transversely loaded clamped-clamped beam examples that topology optimization can be used to design structures that experience snap-through behavior. Here, we focus our attention on the design problem formulation where the goal is to develop a general...... approach for the design of mechanisms that experience more complex snap-through behavior. A multiphase design strategy is outlined, numerous significant challenges to this complex design process are discussed, and several examples are presented that demonstrate progress toward this goal. (C) 2004 Elsevier...

Morphological study on the olfactory systems of the snapping turtle, Chelydra serpentina.

Science.gov (United States)

Nakamuta, Nobuaki; Nakamuta, Shoko; Kato, Hideaki; Yamamoto, Yoshio

2016-06-01

In this study, the olfactory system of a semi-aquatic turtle, the snapping turtle, has been morphologically investigated by electron microscopy, immunohistochemistry, and lectin histochemistry. The nasal cavity of snapping turtle was divided into the upper and lower chambers, lined by the sensory epithelium containing ciliated and non-ciliated olfactory receptor neurons, respectively. Each neuron expressed both Gαolf, the α-subunit of G-proteins coupling to the odorant receptors, and Gαo, the α-subunit of G-proteins coupling to the type 2 vomeronasal receptors. The axons originating from the upper chamber epithelium projected to the ventral part of the olfactory bulb, while those from the lower chamber epithelium to the dorsal part of the olfactory bulb. Despite the identical expression of G-protein α-subunits in the olfactory receptor neurons, these two projections were clearly distinguished from each other by the differential expression of glycoconjugates. In conclusion, these data indicate the presence of two types of olfactory systems in the snapping turtle. Topographic arrangement of the upper and lower chambers and lack of the associated glands in the lower chamber epithelium suggest their possible involvement in the detection of odorants: upper chamber epithelium in the air and the lower chamber epithelium in the water. Copyright © 2016 Elsevier Ltd. All rights reserved.

Efficient radiological assessment of the internal snapping hip syndrome

International Nuclear Information System (INIS)

Wunderbaldinger, P.; Bremer, C.; Matuszewski, L.; Marten, K.; Turetschek, K.; Rand, T.

2001-01-01

The aim of this study was to evaluate the diagnostic value/significance of various imaging techniques for demonstrating the underlying causative pathology of clinically suspected internal snapping hip syndrome. We intended to define the most efficient diagnostic imaging algorithm that leads to a specific definite therapy for this rare hip disorder. The imaging studies of 54 patients (43 women, 11 men, average age 58 years) with the clinical suspicion of internal snapping hip syndrome were compared for their diagnostic value/significance for finding the underlying pathology. Radiological workup included plain radiographs of the pelvis and hip joints (n=54), ultrasound (US) of the hip joints (n=29), computed tomography (CT) of the pelvis and proximal femur (n=17), and magnetic resonance imaging (MRI) of the pelvis/hip joint (n=21). In order to establish an efficient diagnostic algorithm we compared the diagnostic value of each imaging technique alone and in combination with the other methods. The underlying causative pathology could be established in 37% of patients (n=20) by the use of conventional radiographs alone and in 46% of the patients (n=25) by US alone, and in combination in 83% of the patients (n=45). By adding CT to the radiological workup, we established final diagnosis in 88% (in combination with X-ray; n=15/17) and 94% (together with X-ray and US; n=16/17) of the patients. Whenever MR imaging was used a causative pathology was found in all patients (100%; n=21). The most efficient radiological algorithm in the assessment of patients with internal snapping hip syndrome is the combination of plain radiography and US. MR imaging can be retained for unresolved and difficult cases. (orig.)

MC2-2: a code to calculate fast neutron spectra and multigroup cross sections

International Nuclear Information System (INIS)

Henryson, H. II; Toppel, B.J.; Stenberg, C.G.

1976-06-01

MC 2 -2 is a program to solve the neutron slowing down problem using basic neutron data derived from the ENDF/B data files. The spectrum calculated by MC 2 -2 is used to collapse the basic data to multigroup cross sections for use in standard reactor neutronics codes. Four different slowing down formulations are used by MC 2 -2: multigroup, continuous slowing down using the Goertzel-Greuling or Improved Goertzel-Greuling moderating parameters, and a hyper-fine-group integral transport calculation. Resolved and unresolved resonance cross sections are calculated accounting for self-shielding, broadening and overlap effects. This document provides a description of the MC 2 -2 program. The physics and mathematics of the neutron slowing down problem are derived and detailed information is provided to aid the MC 2 -2 user in preparing input for the program and implementation of the program on IBM 370 or CDC 7600 computers

Young Adults’ Attitude Towards Advertising: a multi-group analysis by ethnicity

OpenAIRE

Hiram Ting; Ernest Cyril de Run; Ramayah Thurasamy

2015-01-01

Objective – This study aims to investigate the attitude of Malaysian young adults towards advertising. How this segment responds to advertising, and how ethnic/cultural differences moderate are assessed.Design/methodology/approach – A quantitative questionnaire is used to collect data at two universities. Purposive sampling technique is adopted to ensure the sample represents the actual population. Structural equation modelling (SEM) and multi-group analysis (MGA) are utilized in analysis.Fin...

The reduced serum free triiodothyronine and increased dorsal hippocampal SNAP-25 and Munc18-1 had existed in middle-aged CD-1 mice with mild spatial cognitive impairment.

Science.gov (United States)

Cao, Lei; Jiang, Wei; Wang, Fang; Yang, Qi-Gang; Wang, Chao; Chen, Yong-Ping; Chen, Gui-Hai

2013-12-02

Changes of synaptic proteins in highlighted brain regions and decreased serum thyroid hormones (THs) have been implied in age-related learning and memory decline. Previously, we showed significant pairwise correlations among markedly impaired spatial learning and memory ability, decreased serum free triiodothyronine (FT3) and increased hippocampal SNAP-25 and Munc18-1 in old Kunming mice. However, whether these changes and the correlations occur in middle-age mice remains unclear. Since this age is one of the best stages to study age-related cognitive decline, we explored the spatial learning and memory ability, serum THs, cerebral SNAP-25 and Munc18-1 levels and their relationships of middle-aged mice in this study. The learning and memory abilities of 35 CD-1 mice (19 mice aged 6 months and 16 mice aged 12 months) were measured with a radial six-arm water maze (RAWM). The SNAP-25 and Munc18-1 levels were semi-quantified by Western blotting and the serum THs were detected by radioimmunoassay. The results showed the middle-aged mice had decreased serum FT3, increased dorsal hippocampal (DH) SNAP-25 and Munc18-1, and many or long number of errors and latency in both learning and memory phases of the RAWM. The Pearson's correlation test showed that the DH SANP-25 and Munc18-1 levels were positively correlated with the number of errors and latency in learning phases of the RAWM. Meanwhile, the DH SANP-25 and Munc18-1 levels negatively correlated with the serum FT3 level. These results suggested that reduced FT3 with increased DH SNAP-25 and Munc18-1 levels might be involved in the spatial learning ability decline in the middle-aged mice. © 2013 Elsevier B.V. All rights reserved.

Mining the multigroup-discrete ordinates algorithm for high quality solutions

International Nuclear Information System (INIS)

Ganapol, B.D.; Kornreich, D.E.

2005-01-01

A novel approach to the numerical solution of the neutron transport equation via the discrete ordinates (SN) method is presented. The new technique is referred to as 'mining' low order (SN) numerical solutions to obtain high order accuracy. The new numerical method, called the Multigroup Converged SN (MGCSN) algorithm, is a combination of several sequence accelerators: Romberg and Wynn-epsilon. The extreme accuracy obtained by the method is demonstrated through self consistency and comparison to the independent semi-analytical benchmark BLUE. (authors)

A Study of Structural Stress Technique for Fracture Prediction of an Auto-Mobile Clutch Snap-Ring

International Nuclear Information System (INIS)

Kim, Ju Hee; Myeong, Man Sik; Oh, Chang Sik; Kim, Yun Jae

2016-01-01

The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method

Polycyclic aromatic hydrocarbons affect survival and development of common snapping turtle (Chelydra serpentina) embryos and hatchlings.

Science.gov (United States)

Van Meter, Robin J; Spotila, James R; Avery, Harold W

2006-08-01

Polycyclic aromatic hydrocarbons (PAHs) are toxic compounds found in the John Heinz National Wildlife Refuge in Philadelphia, Pennsylvania. We assessed the impact of PAHs and crude oil on snapping turtle development and behavior by exposing snapping turtle eggs from the Refuge and from three clean reference sites to individual PAHs or a crude oil mixture at stage 9 of embryonic development. Exposure to PAHs had a significant effect on survival rates in embryos from one clean reference site, but not in embryos from the other sites. There was a positive linear relationship between level of exposure to PAHs and severity of deformities in embryos collected from two of the clean reference sites. Neither righting response nor upper temperature tolerance (critical thermal maximum, CTM) of snapping turtle hatchlings with no or minor deformities was significantly affected by exposure to PAHs.

Parallel computation of multigroup reactivity coefficient using iterative method

Science.gov (United States)

Susmikanti, Mike; Dewayatna, Winter

2013-09-01

One of the research activities to support the commercial radioisotope production program is a safety research target irradiation FPM (Fission Product Molybdenum). FPM targets form a tube made of stainless steel in which the nuclear degrees of superimposed high-enriched uranium. FPM irradiation tube is intended to obtain fission. The fission material widely used in the form of kits in the world of nuclear medicine. Irradiation FPM tube reactor core would interfere with performance. One of the disorders comes from changes in flux or reactivity. It is necessary to study a method for calculating safety terrace ongoing configuration changes during the life of the reactor, making the code faster became an absolute necessity. Neutron safety margin for the research reactor can be reused without modification to the calculation of the reactivity of the reactor, so that is an advantage of using perturbation method. The criticality and flux in multigroup diffusion model was calculate at various irradiation positions in some uranium content. This model has a complex computation. Several parallel algorithms with iterative method have been developed for the sparse and big matrix solution. The Black-Red Gauss Seidel Iteration and the power iteration parallel method can be used to solve multigroup diffusion equation system and calculated the criticality and reactivity coeficient. This research was developed code for reactivity calculation which used one of safety analysis with parallel processing. It can be done more quickly and efficiently by utilizing the parallel processing in the multicore computer. This code was applied for the safety limits calculation of irradiated targets FPM with increment Uranium.

On using the dynamic snap-through motion of MEMS initially curved microbeams for filtering applications

KAUST Repository

Ouakad, Hassen M.; Younis, Mohammad I.

2014-01-01

Numerical and experimental investigations of the dynamics of micromachined shallow arches (initially curved microbeams) and the possibility of using their dynamic snap-through motion for filtering purposes are presented. The considered MEMS arches are actuated by a DC electrostatic load along with an AC harmonic load. Their dynamics is examined numerically using a Galerkin-based reduced-order model when excited near both their first and third natural frequencies. Several simulation results are presented demonstrating interesting jumps and dynamic snap-through behavior of the MEMS arches and their attractive features for uses as band-pass filters, such as their sharp roll-off from pass-bands to stop-bands and their flat response. Experimental work is conducted to test arches realized of curved polysilicon microbeams when excited by DC and AC loads. Experimental data of the micromachined curved beams are shown for the softening and hardening behavior near the first and third natural frequencies, respectively, as well as dynamic snap-through motion. © 2013 Elsevier Ltd.

Experimental investigation of snap-through motion of in-plane MEMS shallow arches under electrostatic excitation

KAUST Repository

Ramini, Abdallah

2015-12-11

We present an experimental investigation for the nonlinear dynamic behaviors of clamped–clamped in-plane MEMS shallow arches when excited by harmonic electrostatic forces. Frequency sweeps are conducted to study the dynamic behaviors in the neighborhoods of the first and third resonance frequencies as well as the super-harmonic resonances. Experimental results show local softening behavior of small oscillations around the first resonance frequency and hardening behavior at the third resonance frequency for small dc and ac loads. Interesting dynamic snap-through cross-well motions are observed experimentally at high voltages for the first time in the micro-scale world. In addition to the dynamic snap-through motion, the MEMS arch exhibits large oscillations of a continuous band of snap-through motion between the super-harmonic resonance regime and the first primary resonance regime. This continuous band is unprecedented experimentally in the micro/macro world, and is promising for a variety of sensing, actuation and communications applications.

Experimental investigation of snap-through motion of in-plane MEMS shallow arches under electrostatic excitation

KAUST Repository

Ramini, Abdallah; Bellaredj, Mohammed L F; Al Hafiz, Md Abdullah; Younis, Mohammad I.

2015-01-01

We present an experimental investigation for the nonlinear dynamic behaviors of clamped–clamped in-plane MEMS shallow arches when excited by harmonic electrostatic forces. Frequency sweeps are conducted to study the dynamic behaviors in the neighborhoods of the first and third resonance frequencies as well as the super-harmonic resonances. Experimental results show local softening behavior of small oscillations around the first resonance frequency and hardening behavior at the third resonance frequency for small dc and ac loads. Interesting dynamic snap-through cross-well motions are observed experimentally at high voltages for the first time in the micro-scale world. In addition to the dynamic snap-through motion, the MEMS arch exhibits large oscillations of a continuous band of snap-through motion between the super-harmonic resonance regime and the first primary resonance regime. This continuous band is unprecedented experimentally in the micro/macro world, and is promising for a variety of sensing, actuation and communications applications.

Assessment and comparison of different multigroup neutron cross section libraries for dosimetry purposes

International Nuclear Information System (INIS)

Erradi, L.; Karouani, K.

1994-01-01

Many multigroup neutron cross section libraries have been processed from basic evaluated nuclear data for use in neutron dosimetry, reactor shielding calculation and in the development of fusion reactors. Most of these libraries have been tested only for fission spectra and were not validated for fusion spectra. Fifteen of these libraries such as DOSCROS84, IRDF85 and ENDFB5 have been used along with the neutron spectra unfolding code SAND II to evaluate about fifteen threshold detector saturated activities. The comparison between these computed activities and the measured ones of a set of foils placed in different places along the axis of a paraffin cylinder and irradiated by 14 MeV neutrons generated by a D-T source, hence giving rise to complex spectra, leads to different types of discrepancies. The analysis of these discrepancies allows to select from these libraries the ones that can be recommended. 1 fig., 4 refs. (author)

Integral tests of coupled multigroup neutron and gamma cross sections with fission and fusion sources

International Nuclear Information System (INIS)

Schriewer, J.; Hehn, G.; Mattes, M.; Pfister, G.; Keinert, J.

1978-01-01

Calculations were made for different benchmark experiments in order to test the coupled multigroup neutron and gamma library EURLIB-3 with 100 neutron groups and 20 gamma groups. In cooperation with EURATOM, Ispra, we produced this shielding library recently from ENDF/B-IV data for application in fission and fusion technology. Integral checks were performed for natural lithium, carbon, oxygen, and iron. Since iron is the most important structural material in nuclear technology, we started with calculations of iron benchmark experiments. Most of them are integral experiments of INR, Karlsruhe, but comparisons were also done with benchmark experiments from USA and Japan. For the experiments with fission sources we got satisfying results. All details of the resonances cannot be checked with flux measurements and multigroup cross sections used. But some averaged resonance behaviour of the measured and calculated fluxes can be compared and checked within the error limits given. We get greater differences in the calculations of benchmark experiments with 14 MeV neutron sources. For iron the group cross sections of EURLIB-3 produce an underestimation of the neutron flux in a broad energy region below the source energy. The conclusion is that the energy degradation by inelastic scattering is too strong. For fusion application the anisotropy of the inelastic scatter process must be taken into account, which isn't done by the processing codes at present. If this effect isn't enough, additional corrections have to be applied to the inelastic cross sections of iron in ENDF/B-IV. (author)

Diagnosing Snapping Sartorius Tendon Secondary to a Meniscal Cyst Using Dynamic Ultrasound Avoids Incorrect Surgical Procedure

Directory of Open Access Journals (Sweden)

Vipin Asopa

2013-01-01

Full Text Available We describe a case of painful snapping in the medial aspect of the knee of a 40-year-old man, following a knee hyperflexion injury. Dynamic real-time ultrasonography determined that the snapping was due to the distal tendon of sartorius passing over a medial meniscal cyst. The patient subsequently underwent arthroscopic decompression of the cyst instead of an inappropriate hamstring tendon harvest procedure, with complete resolution of symptoms.

Conception and development of an adaptive energy mesher for multigroup library generation of the transport codes

International Nuclear Information System (INIS)

Mosca, P.

2009-12-01

The deterministic transport codes solve the stationary Boltzmann equation in a discretized energy formalism called multigroup. The transformation of continuous data in a multigroup form is obtained by averaging the highly variable cross sections of the resonant isotopes with the solution of the self-shielding models and the remaining ones with the coarse energy spectrum of the reactor type. So far the error of such an approach could only be evaluated retrospectively. To remedy this, we studied in this thesis a set of methods to control a priori the accuracy and the cost of the multigroup transport computation. The energy mesh optimisation is achieved using a two step process: the creation of a reference mesh and its optimized condensation. In the first stage, by refining locally and globally the energy mesh, we seek, on a fine energy mesh with subgroup self-shielding, a solution equivalent to a reference solver (Monte Carlo or pointwise deterministic solver). In the second step, once fixed the number of groups, depending on the acceptable computational cost, and chosen the most appropriate self-shielding models to the reactor type, we look for the best bounds of the reference mesh minimizing reaction rate errors by the particle swarm optimization algorithm. This new approach allows us to define new meshes for fast reactors as accurate as the currently used ones, but with fewer groups. (author)

A code system to generate multigroup cross-sections using basic data

International Nuclear Information System (INIS)

Garg, S.B.; Kumar, Ashok

1978-01-01

For the neutronic studies of nuclear reactors, multigroup cross-sections derived from the basic energy point data are needed. In order to carry out the design based studies, these cross-sections should also incorporate the temperature and fuel concentration effects. To meet these requirements, a code system comprising of RESRES, UNRES, FIGERO, INSCAT, FUNMO, AVER1 and BGPONE codes has been adopted. The function of each of these codes is discussed. (author)

Neighbourhood and consumer food environment is associated with dietary intake among Supplemental Nutrition Assistance Program (SNAP) participants in Fayette County, Kentucky.

Science.gov (United States)

Gustafson, Alison; Lewis, Sarah; Perkins, Sarah; Wilson, Corey; Buckner, Elizabeth; Vail, Ann

2013-07-01

The aim of the study was to determine the association between dietary outcomes and the neighbourhood food environment (street network distance from home to stores) and consumer food environment (Nutrition Environment Measurement Survey-Stores (NEMS-S) audit). The neighbourhood food environment was captured by creating 0?5-mile and 1-mile network distance (street distance) around each participant’s home and the nearest food venue (convenience store, grocery store, supermarket, farmers’ market and produce stand). The consumer food environment was captured by conducting NEMS-S in all grocery stores/supermarkets within 0?5 and 1 mile of participants’ homes. Fayette County, KY, USA. Supplemental Nutrition Assessment Program (SNAP) participants, n 147. SNAP participants who lived within 0?5 mile of at least one farmers’ market/produce stand had higher odds of consuming one serving or more of vegetables (OR56?92; 95% CI 4?09, 11?69), five servings or more of grains (OR51?76; 95% CI 1?01, 3?05) and one serving or more of milk (OR53?79; 95% CI 2?14, 6?71) on a daily basis. SNAP participants who lived within 0?5 mile of stores receiving a high score on the NEMS-S audit reported higher odds of consuming at least one serving of vegetables daily (OR53?07; 95% CI 1?78, 5?31). Taken together, both the neighbourhood food environment and the consumer food environment are associated with a healthy dietary intake among SNAP participants.

A 2D benchmark for the verification of the PEBBED code

International Nuclear Information System (INIS)

Ganapol, Barry D.; Gougar, Hans D.; Ougouag, Abderrafi M.

2008-01-01

A new benchmarking concept is presented for verifying the PEBBED 3D multigroup finite difference/nodal diffusion code with application to pebble bed modular reactors (PBMRs). The key idea is to perform convergence acceleration, also called extrapolation to zero discretization, of a basic finite difference numerical algorithm to give extremely high accuracy. The method is first demonstrated on a 1D cylindrical shell and then on an r,Θ wedge where the order of the second order finite difference scheme is confirmed to four places. (authors)

Synaptosomal-associated protein 25 (Snap-25) gene polymorphism frequency in fibromyalgia syndrome and relationship with clinical symptoms.

Science.gov (United States)

Balkarli, Ayse; Sengül, Cem; Tepeli, Emre; Balkarli, Huseyin; Cobankara, Veli

2014-05-31

SNAP-25 protein is contributory to plasma membrane and synaptic vesicle fusions that are critical points in neurotransmission. SNAP-25 gene is associated with behavioral symptoms, personality and psychological disorders. In addition, SNAP-25 protein can be related to different neurotransmitter functions due to its association with vesicle membrane transition and fusion. This is important because neurologic, cognitive, and psychologic disorders in fibromyalgia syndrome (FMS) can be related to this function. This relationship may be enlightening for etiopathogenesis of FMS and treatment approaches. We aimed to study a SNAP-25 gene polymorphism, which is related to many psychiatric diseases, and FMS association in this prospective study. We included 71 patients who were diagnosed according to new criteria and 57 matched healthy women in this study. Both groups were evaluated regarding age, height, weight, BMI, education level, marital and occupational status. A new diagnosis of FMS was made from criteria scoring, SF-36, Beck depression scale, and VAS that were applied to the patient group. SNAP-25 gene polymorphism and disease activity score correlations were compared. Mean age was 38±5,196 and 38.12±4.939 in patient and control groups, respectively (p=0.542). No significant difference was found between groups regarding age, height, weight, BMI, education level, marital or occupational status (p > 0.05). Ddel T/C genotype was significantly higher in the patient group (p = 0.009). MnlI gene polymorphism did not show a correlation with any score whereas a significant correlation was found between Ddel T/C genotype and Beck depression scale and VAS score (p < 0.05). FMS etiopathogenesis is not clearly known. Numerous neurologic, cognitive and psychological disorders were found during studies looking at cause. Our study showed increased SNAP-25 Ddel T/C genotype in FMS patients compared to the control group, which is related to behavioral symptoms, personality and

The t-SNAREs syntaxin4 and SNAP23 but not v-SNARE VAMP2 are indispensable to tether GLUT4 vesicles at the plasma membrane in adipocyte

International Nuclear Information System (INIS)

Kawaguchi, Takayuki; Tamori, Yoshikazu; Kanda, Hajime; Yoshikawa, Mari; Tateya, Sanshiro; Nishino, Naonobu; Kasuga, Masato

2010-01-01

SNARE proteins (VAMP2, syntaxin4, and SNAP23) have been thought to play a key role in GLUT4 trafficking by mediating the tethering, docking and subsequent fusion of GLUT4-containing vesicles with the plasma membrane. The precise functions of these proteins have remained elusive, however. We have now shown that depletion of the vesicle SNARE (v-SNARE) VAMP2 by RNA interference in 3T3-L1 adipocytes inhibited the fusion of GLUT4 vesicles with the plasma membrane but did not affect tethering of the vesicles to the membrane. In contrast, depletion of the target SNAREs (t-SNAREs) syntaxin4 or SNAP23 resulted in impairment of GLUT4 vesicle tethering to the plasma membrane. Our results indicate that the t-SNAREs syntaxin4 and SNAP23 are indispensable for the tethering of GLUT4 vesicles to the plasma membrane, whereas the v-SNARE VAMP2 is not required for this step but is essential for the subsequent fusion event.

Experimental exposure of eggs to polybrominated diphenyl ethers BDE-47 and BDE-99 in red-eared sliders (Trachemys scripta elegans) and snapping turtles (Chelydra serpentina) and possible species-specific differences in debromination.

Science.gov (United States)

Eisenreich, Karen M; Rowe, Christopher L

2013-02-01

Polybrominated diphenyl ethers (PBDEs) are a bioaccumulative, persistent, and toxic class of flame retardants that can potentially impact turtles in natural habitats via exposure through maternal transfer. To simulate maternal transfer in the present study, PBDE congeners BDE-47 and BDE-99 were topically applied to the eggshell and were allowed to diffuse into the egg contents of the red-eared slider (Trachemys scripta elegans) and snapping turtle (Chelydra serpentina). Eggs were topically dosed over 8 d to achieve a target concentration of 40 ng/g in the egg contents. Transfer efficiency was higher for BDE-47 than for BDE-99 in the red-eared sliders (25.8 ± 1.9% vs 9.9 ± 1.1%) and snapping turtles (31.3 ± 1.6% vs 12.5 ± 1.4%), resulting in greater BDE-47 and lower BDE-99 egg content concentrations relative to the 40 ng/g target. However, only 25.8 and 31.3% of the total BDE-47 and 9.9 and 12.5% of the total BDE-99 dose applied could be accounted for in the red-eared slider and snapping turtle egg contents, respectively. Additionally, increased BDE-47 in red-eared slider egg contents dosed with only BDE-99 indicate that BDE-99 might have been debrominated to BDE-47. The efficacy of topical dosing for administering desired embryonic exposures is clearly affected by the chemical properties of the applied compounds and was more successful for BDE-47 in both species. Copyright © 2012 SETAC.

A boundary integral equation for boundary element applications in multigroup neutron diffusion theory

International Nuclear Information System (INIS)

Ozgener, B.

1998-01-01

A boundary integral equation (BIE) is developed for the application of the boundary element method to the multigroup neutron diffusion equations. The developed BIE contains no explicit scattering term; the scattering effects are taken into account by redefining the unknowns. Boundary elements of the linear and constant variety are utilised for validation of the developed boundary integral formulation

Redescription of Dracunculus globocephalus Mackin, 1927 (Nematoda: Dracunculidae), a parasite of the snapping turtle, Chelydra serpentina.

Science.gov (United States)

Moravec, Frantisek; Little, M D

2004-12-01

Dracunculus globocephalus Mackin, 1927 (Nematoda: Dracunculoidea) is redescribed from specimens collected from the mesentery of the snapping turtle, Chelydra serpentina (L.), in Louisiana, USA. The use of scanning electron microscopy, applied for the first time in this species, made it possible to study details in the structure of the cephalic end and the arrangement of male caudal papillae that are difficult to observe under the light microscope. This species markedly differs from all other species of Dracunculus in having the spicules greatly unequal in size and shape, in the absence of a gubernaculum, and in the disposition of male caudal papillae. The validity of D. globocephalus is confirmed, but the above mentioned morphological differences are not sufficient for listing it in a separate genus. This is the first record of D. globocephalus in Louisiana.

An efficacy trial of brief lifestyle intervention delivered by generalist community nurses (CN SNAP trial

Directory of Open Access Journals (Sweden)

Fanaian Mahnaz

2010-02-01

Full Text Available Abstract Background Lifestyle risk factors, in particular smoking, nutrition, alcohol consumption and physical inactivity (SNAP are the main behavioural risk factors for chronic disease. Primary health care (PHC has been shown to be an effective setting to address lifestyle risk factors at the individual level. However much of the focus of research to date has been in general practice. Relatively little attention has been paid to the role of nurses working in the PHC setting. Community health nurses are well placed to provide lifestyle intervention as they often see clients in their own homes over an extended period of time, providing the opportunity to offer intervention and enhance motivation through repeated contacts. The overall aim of this study is to evaluate the impact of a brief lifestyle intervention delivered by community nurses in routine practice on changes in clients' SNAP risk factors. Methods/Design The trial uses a quasi-experimental design involving four generalist community nursing services in NSW Australia. Services have been randomly allocated to an 'early intervention' group or 'late intervention' (comparison group. 'Early intervention' sites are provided with training and support for nurses in identifying and offering brief lifestyle intervention for clients during routine consultations. 'Late intervention site' provide usual care and will be offered the study intervention following the final data collection point. A total of 720 generalist community nursing clients will be recruited at the time of referral from participating sites. Data collection consists of 1 telephone surveys with clients at baseline, three months and six months to examine change in SNAP risk factors and readiness to change 2 nurse survey at baseline, six and 12 months to examine changes in nurse confidence, attitudes and practices in the assessment and management of SNAP risk factors 3 semi-structured interviews/focus with nurses, managers and clients

CITATION, 3-D Multigroup Diffusion with 1. Order Perturbation and Criticality Search

International Nuclear Information System (INIS)

Fowler, T.B.; Vondy, D.R.; Cunningham, G.W.

1995-01-01

1 - Description of problem or function: CITATION is designed to solve problems using the finite-difference representation of neutron diffusion theory, treating up to three space dimensions with arbitrary group-to-group scattering. X-y-z, theta-r-z, hexagonal-z, and trigonal-z geometries may be treated. Depletion problems may be solved and fuel managed for multi-cycle analysis. Extensive first-order perturbation results may be obtained given microscopic data and nuclide concentrations. Statics problems may be solved and perturbation results obtained with microscopic data. CITATION-2-3-VP2 is a vectorized version for FACOM VP-100 and VP-200 vector computers. 2 - Method of solution: Explicit, finite-difference approximations in space and time have been implemented. The neutron-flux-eigenvalue problems are solved by direct iteration to determine the multiplication factor or the nuclide densities required for a critical system. CITATION-2-3-VP2: Algorithms for the inner-outer iterative calculations are adapted to vector computers. The SLOR method, which is used in the original CITATION code, and the SOR method, which is adopted in the revised code, are vectorized by odd-even mesh ordering. 3 - Restrictions on the complexity of the problem: CITATION has been designed to attack problems which can be run in a reasonable amount of time. Storage of data is allocated dynamically to give the user flexibility in dimensioning. Typically, a finite-difference diffusion problem could have 200 depleting zones, 10,000 nuclide densities, and 30,000 space-energy point flux values

EBT Payment for Online Grocery Orders: a Mixed-Methods Study to Understand Its Uptake among SNAP Recipients and the Barriers to and Motivators for Its Use.

Science.gov (United States)

Martinez, Olivia; Tagliaferro, Barbara; Rodriguez, Noemi; Athens, Jessica; Abrams, Courtney; Elbel, Brian

2018-04-01

To examine Supplemental Nutrition Assistance Program (SNAP) recipients' use of the first online supermarket accepting Electronic Benefit Transfer (EBT) payment. In this mixed-methods study, the authors collected EBT purchase data from an online grocer and attempted a randomized controlled trial in the South Bronx, New York City, followed by focus groups with SNAP beneficiaries aged ≥18 years. Participants were randomized to shop at their usual grocery store or an online supermarket for 3 months. Focus groups explored barriers and motivators to online EBT redemption. Few participants made online purchases, even when incentivized in the randomized controlled trial. Qualitative findings highlighted a lack of perceived control over the online food selection process as a key barrier to purchasing food online. Motivators included fast, free shipping and discounts. Electronic Benefit Transfer for online grocery purchases has the potential to increase food access among SNAP beneficiaries, but challenges exist to this new food buying option. Understanding online food shopping barriers and motivators is critical to the success of policies targeting the online expansion of SNAP benefits. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Snap your fingers! An ERP/sLORETA study investigating implicit processing of self- vs. other-related movement sounds using the passive oddball paradigm

Directory of Open Access Journals (Sweden)

Christoph Justen

2016-10-01

Full Text Available So far, neurophysiological studies have investigated implicit and explicit self-related processing particularly for self-related stimuli such as the own face or name. The present study extends previous research to the implicit processing of self-related movement sounds and explores their spatiotemporal dynamics. Event-related potentials (ERPs were assessed while participants (N = 12 healthy subjects listened passively to previously recorded self- and other-related finger snapping sounds, presented either as deviants or standards during an oddball paradigm. Passive listening to low (500 Hz and high (1000 Hz pure tones served as additional control. For self- vs. other-related finger snapping sounds, analysis of ERPs revealed significant differences in the time windows of the N2a/MMN and P3. An subsequent source localization analysis with standardized low resolution brain electromagnetic tomography (sLORETA revealed increased cortical activation in distinct motor areas such as the supplementary motor area (SMA in the N2a/mismatch negativity (MMN as well as the P3 time window during processing of self- and other-related finger snapping sounds. In contrast, brain regions associated with self-related processing (e.g., right anterior/posterior cingulate cortex (ACC/PPC as well as the right inferior parietal lobule (IPL showed increased activation particularly during processing of self- vs. other-related finger snapping sounds in the time windows of the N2a/MMN (ACC/PCC or the P3 (IPL. None of these brain regions showed enhanced activation while listening passively to low (500 Hz and high (1000 Hz pure tones. Taken together, the current results indicate (1 a specific role of motor regions such as SMA during auditory processing of movement-related information, regardless of whether this information is self- or other-related, (2 activation of neural sources such as the ACC/PCC and the IPL during implicit processing of self-related movement stimuli, and (3

Snap Your Fingers! An ERP/sLORETA Study Investigating Implicit Processing of Self- vs. Other-Related Movement Sounds Using the Passive Oddball Paradigm

Science.gov (United States)

Justen, Christoph; Herbert, Cornelia

2016-01-01

So far, neurophysiological studies have investigated implicit and explicit self-related processing particularly for self-related stimuli such as the own face or name. The present study extends previous research to the implicit processing of self-related movement sounds and explores their spatio-temporal dynamics. Event-related potentials (ERPs) were assessed while participants (N = 12 healthy subjects) listened passively to previously recorded self- and other-related finger snapping sounds, presented either as deviants or standards during an oddball paradigm. Passive listening to low (500 Hz) and high (1000 Hz) pure tones served as additional control. For self- vs. other-related finger snapping sounds, analysis of ERPs revealed significant differences in the time windows of the N2a/MMN and P3. An subsequent source localization analysis with standardized low-resolution brain electromagnetic tomography (sLORETA) revealed increased cortical activation in distinct motor areas such as the supplementary motor area (SMA) in the N2a/mismatch negativity (MMN) as well as the P3 time window during processing of self- and other-related finger snapping sounds. In contrast, brain regions associated with self-related processing [e.g., right anterior/posterior cingulate cortex (ACC/PPC)] as well as the right inferior parietal lobule (IPL) showed increased activation particularly during processing of self- vs. other-related finger snapping sounds in the time windows of the N2a/MMN (ACC/PCC) or the P3 (IPL). None of these brain regions showed enhanced activation while listening passively to low (500 Hz) and high (1000 Hz) pure tones. Taken together, the current results indicate (1) a specific role of motor regions such as SMA during auditory processing of movement-related information, regardless of whether this information is self- or other-related, (2) activation of neural sources such as the ACC/PCC and the IPL during implicit processing of self-related movement stimuli, and (3

MVP/GMVP version 3. General purpose Monte Carlo codes for neutron and photon transport calculations based on continuous energy and multigroup methods

International Nuclear Information System (INIS)

Nagaya, Yasunobu; Okumura, Keisuke; Sakurai, Takeshi; Mori, Takamasa

2017-03-01

In order to realize fast and accurate Monte Carlo simulation of neutron and photon transport problems, two Monte Carlo codes MVP (continuous-energy method) and GMVP (multigroup method) have been developed at Japan Atomic Energy Agency. The codes have adopted a vectorized algorithm and have been developed for vector-type supercomputers. They also support parallel processing with a standard parallelization library MPI and thus a speed-up of Monte Carlo calculations can be achieved on general computing platforms. The first and second versions of the codes were released in 1994 and 2005, respectively. They have been extensively improved and new capabilities have been implemented. The major improvements and new capabilities are as follows: (1) perturbation calculation for effective multiplication factor, (2) exact resonant elastic scattering model, (3) calculation of reactor kinetics parameters, (4) photo-nuclear model, (5) simulation of delayed neutrons, (6) generation of group constants. This report describes the physical model, geometry description method used in the codes, new capabilities and input instructions. (author)

Survey of computer codes which produce multigroup data from ENDF/B-IV

International Nuclear Information System (INIS)

Greene, N.M.

1975-01-01

The features of three code systems that produce multigroup neutron data are contrasted. This includes the ETOE-2/MC 2 -2/SDX, MINX/SPHINX and AMPX code packages. These systems all contain a fairly extensive set of processing capabilities with the current evaluated nuclear data files--ENDF/B. They were designed with different goals and applications in mind. This paper discusses some of their differences and the implications for particular situations

Effects of environmentally relevant concentrations of atrazine on gonadal development of snapping turtles (Chelydra serpentina).

Science.gov (United States)

de Solla, Shane R; Martin, Pamela A; Fernie, Kimberly J; Park, Brad J; Mayne, Gregory

2006-02-01

The herbicide atrazine has been suspected of affecting sexual development by inducing aromatase, resulting in the increased conversion of androgens to estrogens. We used snapping turtles (Chelydra serpentina), a species in which sex is dependent on the production of estrogen through aromatase activity in a temperature-dependent manner, to investigate if environmentally relevant exposures to atrazine affected gonadal development. Eggs were incubated in soil to which atrazine was applied at a typical field application rate (3.1 L/ha), 10-fold this rate (31 L/ha), and a control rate (no atrazine) for the duration of embryonic development. The incubation temperature (25 degrees C) was selected to produce only males. Although some males with testicular oocytes and females were produced in the atrazine-treated groups (3.3-3.7%) but not in the control group, no statistical differences were found among treatments. Furthermore, snapping turtle eggs collected from natural nests in a corn field were incubated at the pivotal temperature (27.5 degrees C) at which both males and females normally would be produced, and some males had oocytes in the testes (15.4%). The presence of low numbers of males with oocytes may be a natural phenomenon, and we have limited evidence to suggest that the presence of normal males with oocytes may represent a feminizing effect of atrazine. Histological examination of the thyroid gland revealed no effect on thyroid morphology.

From Fourier Transforms to Singular Eigenfunctions for Multigroup Transport

International Nuclear Information System (INIS)

Ganapol, B.D.

2001-01-01

A new Fourier transform approach to the solution of the multigroup transport equation with anisotropic scattering and isotropic source is presented. Through routine analytical continuation, the inversion contour is shifted from the real line to produce contributions from the poles and cuts in the complex plane. The integrand along the branch cut is then recast in terms of matrix continuum singular eigenfunctions, demonstrating equivalence of Fourier transform inversion and the singular eigenfunction expansion. The significance of this paper is that it represents the initial step in revealing the intimate connection between the Fourier transform and singular eigenfunction approaches as well as serves as a basis for a numerical algorithm

PROF-DD, Generator of Multigroup Cross-Sections Library DDX for MORSE-DD, ANISN-DD, DOT-DD

International Nuclear Information System (INIS)

Mori, Takamasa; Nakagawa, Masayuki; Ishiguro, Yukio

2002-01-01

1 - Description of program or function: The code system PROF-DD generates a multi-group double-differential cross section library DDX from evaluated data in ENDF/B-IV or ENDF/B-V format. The system consists of the following five modules: PROF-DDX is the main module of the system. It calculates the multigroup DDX and stores them on a master PDS file. MCFILEF generates a control file for PROF-DDX, which contains energy group and angle bin structures. SPINPTF prepares an input data file for PROF-DDX by combining the control file with other input data. DDXLIBMK edits a DDX library from the master PDS file for transport calculations. RESENDD performs resonance cross section and Doppler broadening calculations. 2 - Restrictions on the complexity of the problem: The numbers of energy groups and angle bins are less than 150 and 40, respectively

Simulate-HEX - The multi-group diffusion equation in hexagonal-z geometry

International Nuclear Information System (INIS)

Lindahl, S. O.

2013-01-01

The multigroup diffusion equation is solved for the hexagonal-z geometry by dividing each hexagon into 6 triangles. In each triangle, the Fourier solution of the wave equation is approximated by 8 plane waves to describe the intra-nodal flux accurately. In the end an efficient Finite Difference like equation is obtained. The coefficients of this equation depend on the flux solution itself and they are updated once per power/void iteration. A numerical example demonstrates the high accuracy of the method. (authors)

Towards Lego Snapping; Integration of Carbon Nanotubes and Few-Layer Graphene

Science.gov (United States)

Nasseri, Mohsen; Boland, Mathias; Farrokhi, M. Javad; Strachan, Douglas

Integration of semiconducting, conducting, and insulating nanomaterials into precisely aligned complicated systems is one of the main challenges to the ultimate size scaling of electronic devices, which is a key goal in nanoscience and nanotechnology. This integration could be made more effective through controlled alignment of the crystallographic lattices of the nanoscale components. Of the vast number of materials of atomically-thin materials, two of the sp2 bonded carbon structures, graphene and carbon nanotubes, are ideal candidates for this type of application since they are built from the same backbone carbon lattice. Here we report carbon nanotube and graphene hybrid nanostructures fabricated through their catalytic synthesis and etching. The growth formations we have investigated through various high-resolution microscopy techniques provide evidence of lego-snapped interfaces between nanotubes and graphene into device-relevant orientations. We will finish with a discussion of the various size and energy regimes relevant to these lego-snapped interfaces and their implications on developing these integrated formations.

The Snapping Elbow Syndrome as a Reason for Chronic Elbow Neuralgia in a Tennis Player - MR, US and Sonoelastography Evaluation.

Science.gov (United States)

Łasecki, Mateusz; Olchowy, Cyprian; Pawluś, Aleksander; Zaleska-Dorobisz, Urszula

2014-01-01

Ulnar neuropathy is the second most common peripheral nerve neuropathy after median neuropathy, with an incidence of 25 cases per 100 000 men and 19 cases per 100 000 women each year. Skipping (snapping) elbow syndrome is an uncommon cause of pain in the posterior-medial elbow area, sometimes complicated by injury of the ulnar nerve. One of the reason is the dislocation of the abnormal insertion of the medial triceps head over the medial epicondyle during flexion and extension movements. Others are: lack of the Osboune fascia leading to ulnar nerve instability and focal soft tissue tumors (fibromas, lipomas, etc). Recurrent subluxation of the nerve at the elbow results in a tractional and frictional neuritis with classical symptoms of peripheral neuralgia. As far as we know snapping triceps syndrome had never been evaluated in sonoelastography. A 28yo semi-professional left handed tennis player was complaining about pain in posterior-medial elbow area. Initial US examination suggest golfers elbow syndrome which occurs quite commonly and has a prevalence of 0.3-0.6% in males and 0-3-1.1% in women and may be associated (approx. 50% of cases) with ulnar neuropathy. However subsequently made MRI revealed unusual distal triceps anatomy, moderate ulnar nerve swelling and lack of medial epicondylitis symptoms. Followed (second) US examination and sonoelastography have detected slipping of the both ulnar nerve and the additional band of the medial triceps head. Snapping elbow syndrome is a poorly known medical condition, sometimes misdiagnosed as the medial epicondylitis. It describes a broad range of pathologies and anatomical abnormalities. One of the most often reasons is the slipping of the ulnar nerve as the result of the Osborne fascia/anconeus epitrochlearis muscle absence. Simultaneously presence of two or more "snapping reasons" is rare but should be always taken under consideration. There are no sonoelastography studies describing golfers elbow syndrome

Solution of multi-group diffusion equation in x-y-z geometry by finite Fourier transformation

International Nuclear Information System (INIS)

Kobayashi, Keisuke

1975-01-01

The multi-group diffusion equation in three-dimensional x-y-z geometry is solved by finite Fourier transformation. Applying the Fourier transformation to a finite region with constant nuclear cross sections, the fluxes and currents at the material boundaries are obtained in terms of the Fourier series. Truncating the series after the first term, and assuming that the source term is piecewise linear within each mesh box, a set of coupled equations is obtained in the form of three-point equations for each coordinate. These equations can be easily solved by the alternative direction implicit method. Thus a practical procedure is established that could be applied to replace the currently used difference equation. This equation is used to solve the multi-group diffusion equation by means of the source iteration method; and sample calculations for thermal and fast reactors show that the present method yields accurate results with a smaller number of mesh points than the usual finite difference equations. (auth.)

The unhealthy food environment does not modify the association between obesity and participation in the Supplemental Nutrition Assistance Program (SNAP) in Los Angeles County.

Science.gov (United States)

Chaparro, M Pia; Harrison, Gail G; Wang, May C; Seto, Edmund Y W; Pebley, Anne R

2017-01-14

Participation in the Supplemental Nutrition Assistance Program (SNAP) has been linked to an increased risk of obesity, but not much is known about the mechanisms behind this association. The objective of this study was to determine if the neighborhood density of unhealthy food outlets modifies the association between obesity and participation in SNAP. Data comes from the first wave of the Los Angeles Family and Neighborhood Survey; included are a subsample of adults (18+ years) who were SNAP participants or eligible non-participants (N = 1,176). We carried out multilevel analyses with obesity (BMI ≥ 30 Kg/m 2 ), SNAP participation, and the neighborhood density of unhealthy food outlets as dependent, independent and modifying variables, respectively, controlling for age, gender, race/ethnicity, marital status, working status, mental health, and neighborhood poverty. SNAP participants had double the odds of obesity compared to eligible non-participants (OR = 2.02; 95%CI = 1.44-2.83). However, the neighborhood density of unhealthy food outlets did not modify this association. SNAP participation was associated with higher odds of obesity in our primarily Hispanic sample in Los Angeles County, with no effect modification found for the unhealthy portion of the food environment. More research is needed with additional food environment measures to confirm our null findings. Additional research is needed to elucidate the mechanisms linking SNAP participation and obesity as they remain unclear.

WIMSD5, Deterministic Multigroup Reactor Lattice Calculations

International Nuclear Information System (INIS)

2004-01-01

1 - Description of program or function: The Winfrith improved multigroup scheme (WIMS) is a general code for reactor lattice cell calculation on a wide range of reactor systems. In particular, the code will accept rod or plate fuel geometries in either regular arrays or in clusters and the energy group structure has been chosen primarily for thermal calculations. The basic library has been compiled with 14 fast groups, 13 resonance groups and 42 thermal groups, but the user is offered the choice of accurate solutions in many groups or rapid calculations in few groups. Temperature dependent thermal scattering matrices for a variety of scattering laws are included in the library for the principal moderators which include hydrogen, deuterium, graphite, beryllium and oxygen. WIMSD5 is a successor version of WIMS-D/4. 2 - Method of solution: The treatment of resonances is based on the use of equivalence theorems with a library of accurately evaluated resonance integrals for equivalent homogeneous systems at a variety of temperatures. The collision theory procedure gives accurate spectrum computations in the 69 groups of the library for the principal regions of the lattice using a simplified geometric representation of complicated lattice cells. The computed spectra are then used for the condensation of cross-sections to the number of groups selected for solution of the transport equation in detailed geometry. Solution of the transport equation is provided either by use of the Carlson DSN method or by collision probability methods. Leakage calculations including an allowance for streaming asymmetries may be made using either diffusion theory or the more elaborate B1-method. The output of the code provides Eigenvalues for the cases where a simple buckling mode is applicable or cell-averaged parameters for use in overall reactor calculations. Various reaction rate edits are provided for direct comparison with experimental measurements. 3 - Restrictions on the complexity of

GPU-accelerated 3D neutron diffusion code based on finite difference method

Energy Technology Data Exchange (ETDEWEB)

Xu, Q.; Yu, G.; Wang, K. [Dept. of Engineering Physics, Tsinghua Univ. (China)

2012-07-01

Finite difference method, as a traditional numerical solution to neutron diffusion equation, although considered simpler and more precise than the coarse mesh nodal methods, has a bottle neck to be widely applied caused by the huge memory and unendurable computation time it requires. In recent years, the concept of General-Purpose computation on GPUs has provided us with a powerful computational engine for scientific research. In this study, a GPU-Accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. First, a clean-sheet neutron diffusion code (3DFD-CPU) was written in C++ on the CPU architecture, and later ported to GPUs under NVIDIA's CUDA platform (3DFD-GPU). The IAEA 3D PWR benchmark problem was calculated in the numerical test, where three different codes, including the original CPU-based sequential code, the HYPRE (High Performance Pre-conditioners)-based diffusion code and CITATION, were used as counterpoints to test the efficiency and accuracy of the GPU-based program. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. A speedup factor of about 46 times was obtained, using NVIDIA's Geforce GTX470 GPU card against a 2.50 GHz Intel Quad Q9300 CPU processor. Compared with the HYPRE-based code performing in parallel on an 8-core tower server, the speedup of about 2 still could be observed. More encouragingly, without any mathematical acceleration technology, the GPU implementation ran about 5 times faster than CITATION which was speeded up by using the SOR method and Chebyshev extrapolation technique. (authors)

GPU-accelerated 3D neutron diffusion code based on finite difference method

International Nuclear Information System (INIS)

Xu, Q.; Yu, G.; Wang, K.

2012-01-01

Finite difference method, as a traditional numerical solution to neutron diffusion equation, although considered simpler and more precise than the coarse mesh nodal methods, has a bottle neck to be widely applied caused by the huge memory and unendurable computation time it requires. In recent years, the concept of General-Purpose computation on GPUs has provided us with a powerful computational engine for scientific research. In this study, a GPU-Accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. First, a clean-sheet neutron diffusion code (3DFD-CPU) was written in C++ on the CPU architecture, and later ported to GPUs under NVIDIA's CUDA platform (3DFD-GPU). The IAEA 3D PWR benchmark problem was calculated in the numerical test, where three different codes, including the original CPU-based sequential code, the HYPRE (High Performance Pre-conditioners)-based diffusion code and CITATION, were used as counterpoints to test the efficiency and accuracy of the GPU-based program. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. A speedup factor of about 46 times was obtained, using NVIDIA's Geforce GTX470 GPU card against a 2.50 GHz Intel Quad Q9300 CPU processor. Compared with the HYPRE-based code performing in parallel on an 8-core tower server, the speedup of about 2 still could be observed. More encouragingly, without any mathematical acceleration technology, the GPU implementation ran about 5 times faster than CITATION which was speeded up by using the SOR method and Chebyshev extrapolation technique. (authors)

Specifications for a two-dimensional multi-group scattering code: ALCI

International Nuclear Information System (INIS)

Bayard, J.P.; Guillou, A.; Lago, B.; Bureau du Colombier, M.J.; Guillou, G.; Vasseur, Ch.

1965-02-01

This report describes the specifications of the ALCI programme. This programme resolves the system of difference equations similar to the homogeneous problem of multigroup neutron scattering, with two dimensions in space, in the three geometries XY, RZ, RΘ. It is possible with this method to calculate geometric and composition criticalities and also to calculate the accessory problem on demand. The maximum number of points dealt with is 6000. The maximum permissible number of groups is 12. The internal iterations are treated by the method of alternating directions. The external iterations are accelerated using the extrapolation method due to Tchebychev. (authors) [fr

On the presence of plutonium in Madagascar following the SNAP-9A satellite failure.

Science.gov (United States)

Rääf, C; Holm, E; Rabesiranana, N; Garcia-Tenorio, R; Chamizo, E

2017-10-01

This study examined the 238 Pu and 239+240 Pu activity concentration and the 240 Pu/ 239 Pu atomic ratio in peat bogs sampled in 2012 from marshlands in central Madagascar. The purpose was to investigate the presence of plutonium isotopes, 238, 239, 240 Pu, from the 1964 satellite failure carrying a SNAP-9A radiothermal generator. With an average 238 Pu/ 239+240 Pu activity ratio of 0.165 ± 0.02 (decay corrected to 1964), the peat bogs in Madagascar exhibit similar values as the ones found in the southeastern African continent, except they are one order of magnitude higher than expected (0.025) from global fallout in the Southern Hemisphere. The 240 Pu/ 239 Pu atomic ratio showed a distinct decrease for layers dating back to the mid-1960s (down to 0.069 compared with an anticipated ratio of 0.17 for global fallout), indicating that the SNAP-9A failure also resulted in an elevated deposition of 239 Pu. The obtained results demonstrate that further Pu analysis in Madagascar and in southeastern continental Africa is necessary to fully account for the regional Pu deposition from the SNAP-9A event. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of diamide insecticides co-applied with other agrochemicals at various times to manage Ostrinia nubilalis in processing snap bean.

Science.gov (United States)

Huseth, Anders S; Groves, Russell L; Chapman, Scott A; Nault, Brian A

2015-12-01

Multiple applications of pyrethroid insecticides are used to manage European corn borer, Ostrinia nubilalis Hübner, in snap bean, but new diamide insecticides may reduce application frequency. In a 2 year small-plot study, O. nubilalis control was evaluated by applying cyantraniliprole (diamide) and bifenthrin (pyrethroid) insecticides at one of three phenological stages (bud, bloom and pod formation) of snap bean development. Co-application of these insecticides with either herbicides or fungicides was also examined as a way to reduce the total number of sprays during a season. Cyantraniliprole applications timed either during bloom or during pod formation controlled O. nubilalis better than similar timings of bifenthrin. Co-applications of insecticides with fungicides controlled O. nubilalis as well as insecticide applications alone. Insecticides applied either alone or with herbicides during bud stage did not control this pest. Diamides are an alternative to pyrethroids for the management of O. nubilalis in snap bean. Adoption of diamides by snap bean growers could improve the efficiency of production by reducing the number of sprays required each season. © 2015 Society of Chemical Industry.

Collapsing of multigroup cross sections in optimization problems solved by means of the maximum principle of Pontryagin

International Nuclear Information System (INIS)

Anton, V.

1979-05-01

A new formulation of multigroup cross section collapsing based on the conservation of point or zone value of hamiltonian is presented. This attempt is proper to optimization problems solved by means of maximum principle of Pontryagin. (author)

Algorithm development and verification of UASCM for multi-dimension and multi-group neutron kinetics model

International Nuclear Information System (INIS)

Si, S.

2012-01-01

The Universal Algorithm of Stiffness Confinement Method (UASCM) for neutron kinetics model of multi-dimensional and multi-group transport equations or diffusion equations has been developed. The numerical experiments based on transport theory code MGSNM and diffusion theory code MGNEM have demonstrated that the algorithm has sufficient accuracy and stability. (authors)

Continuous energy Monte Carlo method based homogenization multi-group constants calculation

International Nuclear Information System (INIS)

Li Mancang; Wang Kan; Yao Dong

2012-01-01

The efficiency of the standard two-step reactor physics calculation relies on the accuracy of multi-group constants from the assembly-level homogenization process. In contrast to the traditional deterministic methods, generating the homogenization cross sections via Monte Carlo method overcomes the difficulties in geometry and treats energy in continuum, thus provides more accuracy parameters. Besides, the same code and data bank can be used for a wide range of applications, resulting in the versatility using Monte Carlo codes for homogenization. As the first stage to realize Monte Carlo based lattice homogenization, the track length scheme is used as the foundation of cross section generation, which is straight forward. The scattering matrix and Legendre components, however, require special techniques. The Scattering Event method was proposed to solve the problem. There are no continuous energy counterparts in the Monte Carlo calculation for neutron diffusion coefficients. P 1 cross sections were used to calculate the diffusion coefficients for diffusion reactor simulator codes. B N theory is applied to take the leakage effect into account when the infinite lattice of identical symmetric motives is assumed. The MCMC code was developed and the code was applied in four assembly configurations to assess the accuracy and the applicability. At core-level, A PWR prototype core is examined. The results show that the Monte Carlo based multi-group constants behave well in average. The method could be applied to complicated configuration nuclear reactor core to gain higher accuracy. (authors)

Critical homoclinic orbits lead to snap-back repellers

International Nuclear Information System (INIS)

Gardini, Laura; Sushko, Iryna; Avrutin, Viktor; Schanz, Michael

2011-01-01

Highlights: → We consider critical homoclinic orbits in continuous and discontinuous maps. → Unbounded homoclinic orbits in maps on unbounded domains are considered as well. → We show that a snapback-repeller (SBR) with a non-critical homoclinic orbit implies chaos. → We show also that a SBR with a critical homoclinic orbit may or may not imply chaos. - Abstract: When nondegenerate homoclinic orbits to an expanding fixed point of a map f:X→X,X subset or equal R n , exist, the point is called a snap-back repeller. It is known that the relevance of a snap-back repeller (in its original definition) is due to the fact that it implies the existence of an invariant set on which the map is chaotic. However, when does the first homoclinic orbit appear? When can other homoclinic explosions, i.e., appearance of infinitely many new homoclinic orbits, occur? As noticed by many authors, these problems are still open. In this work we characterize these bifurcations, for any kind of map, smooth or piecewise smooth, continuous or discontinuous, defined in a bounded or unbounded closed set. We define a noncritical homoclinic orbit and a homoclinic orbit of an expanding fixed point is structurally stable iff it is noncritical. That is, only critical homoclinic orbits are responsible for the homoclinic explosions. The possible kinds of critical homoclinic orbits will be also investigated, as well as their dynamic role.

Membrane fusion by VAMP3 and plasma membrane t-SNAREs

International Nuclear Information System (INIS)

Hu Chuan; Hardee, Deborah; Minnear, Fred

2007-01-01

Pairing of SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor) proteins on vesicles (v-SNAREs) and SNARE proteins on target membranes (t-SNAREs) mediates intracellular membrane fusion. VAMP3/cellubrevin is a v-SNARE that resides in recycling endosomes and endosome-derived transport vesicles. VAMP3 has been implicated in recycling of transferrin receptors, secretion of α-granules in platelets, and membrane trafficking during cell migration. Using a cell fusion assay, we examined membrane fusion capacity of the ternary complexes formed by VAMP3 and plasma membrane t-SNAREs syntaxin1, syntaxin4, SNAP-23 and SNAP-25. VAMP3 forms fusogenic pairing with t-SNARE complexes syntaxin1/SNAP-25, syntaxin1/SNAP-23 and syntaxin4/SNAP-25, but not with syntaxin4/SNAP-23. Deletion of the N-terminal domain of syntaxin4 enhanced membrane fusion more than two fold, indicating that the N-terminal domain negatively regulates membrane fusion. Differential membrane fusion capacities of the ternary v-/t-SNARE complexes suggest that transport vesicles containing VAMP3 have distinct membrane fusion kinetics with domains of the plasma membrane that present different t-SNARE proteins

SNAP 19 Viking RTG mission performance

International Nuclear Information System (INIS)

Brittain, W.M.

1976-01-01

The Viking-75 mission utilized the August/September 1975 opportunity to launch two spacecrafts to Mars for arrival in 1976 after about a one-year transit period. On arrival, each spacecraft, consisting of an orbiter and lander, will be placed in Mars orbit, with each lander subsequently descending from orbit to a soft-landing on the Martian surface. Two SNAP 19 RTG's (radioisotope thermoelectric generators) provide the primary source of electrical power and means of thermal control for each Viking lander. The RTG's will be switched on-load just prior to separation of the lander from the orbiter for checkout of the lander, and will remain on-load during entry and the remainder of the 90-day minimum surface mission

SNAP Participation in Preschool-Aged Children and Prevalence of Overweight and Obesity

Science.gov (United States)

Simmons, Shannon; Alexander, Jeffrey L.; Ewing, Helen; Whetzel, Stephanie

2012-01-01

Background: An increased prevalence of overweight and obesity for adults on government-funded nutrition assistance, such as the Supplemental Nutrition Assistance Program (SNAP), has been observed; however, this association among preschool-aged children is not well understood. Longitudinal research designs tracking changes in body mass…

Hydrogen transport in a toroidal plasma using multigroup discrete-ordinates methodology

International Nuclear Information System (INIS)

Wienke, B.R.; Miller, W.F. Jr.; Seed, T.J.

1979-01-01

Neutral hydrogen transport in a fully ionized two-dimensional tokamak plasma was examined using discrete ordinates and contrasted with earlier analyses. In particular, curvature effects induced by toroidal geometries and ray effects caused by possible source localization were investigated. From an overview of the multigroup discrete-ordinates approximation, methodology in two-dimensional cylindrical geometry is detailed, mesh and plasma zoning procedures are sketched, and the piecewise polynomial solution algorithm on a triangular domain is obtained. Toroidal effects and comparisons as related to reaction rates and perticle spectra are examined for various model and source configurations

Extra-articular subcutaneous "inverted king post-truss" ligament reconstruction for severe swan neck deformity (snapping finger).

Science.gov (United States)

de Soras, X; de Mourgues, P; Pradel, P; Urien, J-P; Beaudoin, E

2017-02-01

A swan neck deformity (SND) can be well tolerated for a long time, until the appearance of a disabling "snapping finger". In its most advanced condition, the other hand is needed to initiate finger flexion. We propose a technique of extra-articular, subcutaneous ligament reconstruction with an "inverted king post-truss" configuration use in roofs and to reinforce railway bridges. An artificial ligament (MaxBraid™ polyethylene surgical suture, 5 metric, Biomet) makes a figure of eight between transosseous tunnels in the proximal and middle phalanges, crossing over top of the A3 pulley. We limited our series to severe SND cases with "snapping finger". We excluded isolated SNDs without functional disability. Eleven patients were followed for 3.4 years on average. The cause was an acute injury 8 times (7 balloon accidents), rheumatoid arthritis 2 times and overuse once (saxophone). Only one case was a poor outcome of mallet finger. The 11 patients were reassessed by a telephone survey. Two patients underwent reoperation: one for a ligament rupture, the other one for a knot that became untied. One patient had a suspected late rupture but without recurrence of the disabling snapping finger. The 11 patients considered themselves improved by the intervention. Nine patients did not notice any difference between their operated finger and the contralateral side. Return to manual activity was possible once the skin had healed. The technique is simpler than the spiral oblique retinacular ligament (SORL) reconstruction technique described by Thomson-Littler and also less demanding because it does not involve the distal interphalangeal joint. It requires only a short incision in the volar crease of the proximal interphalangeal joint. No tendon or ligament is sacrificed. Neither postoperative immobilization nor lengthy physical therapy is needed. Complications can be avoided by selecting the appropriate artificial ligament material and careful knot tying. Copyright © 2016 SFCM

Some reciprocity-like relations in multi-group neutron diffusion and transport theory over bare homogeneous regions

International Nuclear Information System (INIS)

Modak, R.S.; Sahni, D.C.

1996-01-01

Some simple reciprocity-like relations that exist in multi-group neutron diffusion and transport theory over bare homogeneous regions are presented. These relations do not involve the adjoint solutions and are directly related to numerical schemes based on an explicit evaluation of the fission matrix. (author)

The Schedule for Nonadaptive and Adaptive Personality for Youth (SNAP-Y): A New Measure for Assessing Adolescent Personality and Personality Pathology

Science.gov (United States)

Linde, Jennifer A.; Stringer, Deborah; Simms, Leonard J.; Clark, Lee Anna

2013-01-01

The Schedule for Nonadaptive and Adaptive Personality-Youth Version (SNAP-Y) is a new, reliable self-report questionnaire that assesses 15 personality traits relevant to both normal-range personality and the alternative "DSM"-5 model for personality disorder. Community adolescents, 12 to 18 years old (N = 364), completed the SNAP-Y; 347…

THE EFFECTS OF OXIDANT AIR POLLUTANTS ON SOYBEANS, SNAP BEANS AND POTATOES

Science.gov (United States)

During the past 5 years the impact of photochemical oxidants on soybeans and snap beans in Maryland and on potatoes in Virginia and Delaware was assessed with open-top chambers. The mean yields of four selected soybean varieties grown in open-top chambers with carbon-filtered air...

User manual for version 4.3 of the Tripoli-4 Monte-Carlo method particle transport computer code; Notice d'utilisation du code Tripoli-4, version 4.3: code de transport de particules par la methode de Monte Carlo

Energy Technology Data Exchange (ETDEWEB)

Both, J.P.; Mazzolo, A.; Peneliau, Y.; Petit, O.; Roesslinger, B

2003-07-01

This manual relates to Version 4.3 TRIPOLI-4 code. TRIPOLI-4 is a computer code simulating the transport of neutrons, photons, electrons and positrons. It can be used for radiation shielding calculations (long-distance propagation with flux attenuation in non-multiplying media) and neutronic calculations (fissile medium, criticality or sub-criticality basis). This makes it possible to calculate k{sub eff} (for criticality), flux, currents, reaction rates and multi-group cross-sections. TRIPOLI-4 is a three-dimensional code that uses the Monte-Carlo method. It allows for point-wise description in terms of energy of cross-sections and multi-group homogenized cross-sections and features two modes of geometrical representation: surface and combinatorial. The code uses cross-section libraries in ENDF/B format (such as JEF2-2, ENDF/B-VI and JENDL) for point-wise description cross-sections in APOTRIM format (from the APOLLO2 code) or a format specific to TRIPOLI-4 for multi-group description. (authors)

One-, two- and three-dimensional transport codes using multi-group double-differential form cross sections

International Nuclear Information System (INIS)

Mori, Takamasa; Nakagawa, Masayuki; Sasaki, Makoto.

1988-11-01

We have developed a group of computer codes to realize the accurate transport calculation by using the multi-group double-differential form cross section. This type of cross section can correctly take account of the energy-angle correlated reaction kinematics. Accordingly, the transport phenomena in materials with highly anisotropic scattering are accurately calculated by using this cross section. They include the following four codes or code systems: PROF-DD : a code system to generate the multi-group double-differential form cross section library by processing basic nuclear data file compiled in the ENDF / B-IV or -V format, ANISN-DD : a one-dimensional transport code based on the discrete ordinate method, DOT-DD : a two-dimensional transport code based on the discrete ordinate method, MORSE-DD : a three-dimensional transport code based on the Monte Carlo method. In addition to these codes, several auxiliary codes have been developed to process calculated results. This report describes the calculation algorithm employed in these codes and how to use them. (author)

Improved Fiber Bragg Grating Array OFFH-CDMA System Using a Novel Frequency-Overlapping Multigroup Method

Science.gov (United States)

Peng, Wei-Ren; Lin, Wen-Piao; Chi, Sien

2006-03-01

The authors propose a novel frequency-overlapping multigroup scheme for a passive all-optical fast-frequency hopped code-division multiple-access (OFFH-CDMA) system based on fiber Bragg grating array (FBGA). In the conventional scheme, the users are assigned those codes constructed on the nonoverlapping frequency slots, and therefore the bandgaps between the adjacent gratings are wasted. To make a more efficient use of the optical spectrum, the proposed scheme divided the users into several groups, and assigned the codes, which interleaved to each other to the different groups. In addition to the higher utilization of the spectrum, the interleaved nature of the frequency allocations of different groups will make the groups less correlated and, hence, lower the multiple-access interference (MAI). The corresponding codeset and its constraints for this new scheme are also developed and analyzed. The performance of the system in terms of the correlation functions and bit error rate (BER) are given in both the conventional and the proposed schemes. The numerical results show that, with the multigroup scheme, performance is much improved compared to the conventional scheme.

A new modelling of the multigroup scattering cross section in deterministic codes for neutron transport

International Nuclear Information System (INIS)

Calloo, A.A.

2012-01-01

, heterogeneous clusters and 1D core-reflector calculations. The main results are given below: - a P3 expansion is sufficient to model the scattering law with respect to the biases due to the other approximations used for calculations (self-shielding, spatial resolution method). This order of expansion is converged for anisotropy representation in the modelling of light water reactors. - the transport correction, P0c is not suited for calculations, especially for B 4 C absorbent. (author) [fr

Adjustement of multigroup cross sections using fast reactor integral data

International Nuclear Information System (INIS)

Renke, C.A.C.

1982-01-01

A methodology for the adjustment of multigroup cross section is presented, structured with aiming to compatibility the limitated number of measured values of integral parameters known and disponible, and the great number of cross sections to be adjusted the group of cross section used is that obtained from the Carnaval II calculation system, understanding as formular the sets of calculation methods and data bases. The adjustment is realized, using the INCOAJ computer code, developed in function of one statistical formulation, structural from the bayer considerations, taking in account the measurement processes of cross section and integral parameters defined on statistical bases. (E.G.) [pt

Validation of multigroup neutron cross sections and calculational methods for the advanced neutron source against the FOEHN critical experiments measurements

International Nuclear Information System (INIS)

Smith, L.A.; Gallmeier, F.X.; Gehin, J.C.

1995-05-01

The FOEHN critical experiment was analyzed to validate the use of multigroup cross sections and Oak Ridge National Laboratory neutronics computer codes in the design of the Advanced Neutron Source. The ANSL-V 99-group master cross section library was used for all the calculations. Three different critical configurations were evaluated using the multigroup KENO Monte Carlo transport code, the multigroup DORT discrete ordinates transport code, and the multigroup diffusion theory code VENTURE. The simple configuration consists of only the fuel and control elements with the heavy water reflector. The intermediate configuration includes boron endplates at the upper and lower edges of the fuel element. The complex configuration includes both the boron endplates and components in the reflector. Cross sections were processed using modules from the AMPX system. Both 99-group and 20-group cross sections were created and used in two-dimensional models of the FOEHN experiment. KENO calculations were performed using both 99-group and 20-group cross sections. The DORT and VENTURE calculations were performed using 20-group cross sections. Because the simple and intermediate configurations are azimuthally symmetric, these configurations can be explicitly modeled in R-Z geometry. Since the reflector components cannot be modeled explicitly using the current versions of these codes, three reflector component homogenization schemes were developed and evaluated for the complex configuration. Power density distributions were calculated with KENO using 99-group cross sections and with DORT and VENTURE using 20-group cross sections. The average differences between the measured values and the values calculated with the different computer codes range from 2.45 to 5.74%. The maximum differences between the measured and calculated thermal flux values for the simple and intermediate configurations are ∼ 13%, while the average differences are < 8%

The mobility of food retailers: How proximity to SNAP authorized food retailers changed in Atlanta during the Great Recession.

Science.gov (United States)

Shannon, Jerry; Bagwell-Adams, Grace; Shannon, Sarah; Lee, Jung Sun; Wei, Yangjiaxin

2018-07-01

Retailer mobility, defined as the shifting geographic patterns of retail locations over time, is a significant but understudied factor shaping neighborhood food environments. Our research addresses this gap by analyzing changes in proximity to SNAP authorized chain retailers in the Atlanta urban area using yearly data from 2008 to 2013. We identify six demographically similar geographic clusters of census tracts in our study area based on race and economic variables. We use these clusters in exploratory data analysis to identify how proximity to the twenty largest retail food chains changed during this period. We then use fixed effects models to assess how changing store proximity is associated with race, income, participation in SNAP, and population density. Our results show clear differences in geographic distribution between store categories, but also notable variation within each category. Increasing SNAP enrollment predicted decreased distances to almost all small retailers but increased distances to many large retailers. Our chain-focused analysis underscores the responsiveness of small retailers to changes in neighborhood SNAP participation and the value of tracking chain expansion and contraction in markets across time. Better understanding of retailer mobility and the forces that drive it can be a productive avenue for future research. Copyright © 2018 Elsevier Ltd. All rights reserved.

Geometrically controlled snapping transitions in shells with curved creases.

Science.gov (United States)

Bende, Nakul Prabhakar; Evans, Arthur A; Innes-Gold, Sarah; Marin, Luis A; Cohen, Itai; Hayward, Ryan C; Santangelo, Christian D

2015-09-08

Curvature and mechanics are intimately connected for thin materials, and this coupling between geometry and physical properties is readily seen in folded structures from intestinal villi and pollen grains to wrinkled membranes and programmable metamaterials. While the well-known rules and mechanisms behind folding a flat surface have been used to create deployable structures and shape transformable materials, folding of curved shells is still not fundamentally understood. Shells naturally deform by simultaneously bending and stretching, and while this coupling gives them great stability for engineering applications, it makes folding a surface of arbitrary curvature a nontrivial task. Here we discuss the geometry of folding a creased shell, and demonstrate theoretically the conditions under which it may fold smoothly. When these conditions are violated we show, using experiments and simulations, that shells undergo rapid snapping motion to fold from one stable configuration to another. Although material asymmetry is a proven mechanism for creating this bifurcation of stability, for the case of a creased shell, the inherent geometry itself serves as a barrier to folding. We discuss here how two fundamental geometric concepts, creases and curvature, combine to allow rapid transitions from one stable state to another. Independent of material system and length scale, the design rule that we introduce here explains how to generate snapping transitions in arbitrary surfaces, thus facilitating the creation of programmable multistable materials with fast actuation capabilities.

Taking into account the impact of attrition on the assessment of response shift and true change: a multigroup structural equation modeling approach.

Science.gov (United States)

Verdam, Mathilde G E; Oort, Frans J; van der Linden, Yvette M; Sprangers, Mirjam A G

2015-03-01

Missing data due to attrition present a challenge for the assessment and interpretation of change and response shift in HRQL outcomes. The objective was to handle such missingness and to assess response shift and 'true change' with the use of an attrition-based multigroup structural equation modeling (SEM) approach. Functional limitations and health impairments were measured in 1,157 cancer patients, who were treated with palliative radiotherapy for painful bone metastases, before [time (T) 0], every week after treatment (T1 through T12), and then monthly for up to 2 years (T13 through T24). To handle missing data due to attrition, the SEM procedure was extended to a multigroup approach, in which we distinguished three groups: short survival (3-5 measurements), medium survival (6-12 measurements), and long survival (>12 measurements). Attrition after third, sixth, and 13th measurement occasions was 11, 24, and 41 %, respectively. Results show that patterns of change in functional limitations and health impairments differ between patients with short, medium, or long survival. Moreover, three response-shift effects were detected: recalibration of 'pain' and 'sickness' and reprioritization of 'physical functioning.' If response-shift effects would not have been taken into account, functional limitations and health impairments would generally be underestimated across measurements. The multigroup SEM approach enables the analysis of data from patients with different patterns of missing data due to attrition. This approach does not only allow for detection of response shift and assessment of true change across measurements, but also allow for detection of differences in response shift and true change across groups of patients with different attrition rates.

Validation of the 3D finite element transport theory code EVENT for shielding applications

International Nuclear Information System (INIS)

Warner, Paul; Oliveira, R.E. de

2000-01-01

This paper is concerned with the validation of the 3D deterministic neutral-particle transport theory code EVENT for shielding applications. The code is based on the finite element-spherical harmonics (FE-P N ) method which has been extensively developed over the last decade. A general multi-group, anisotropic scattering formalism enables the code to address realistic steady state and time dependent, multi-dimensional coupled neutron/gamma radiation transport problems involving high scattering and deep penetration alike. The powerful geometrical flexibility and competitive computational effort makes the code an attractive tool for shielding applications. In recognition of this, EVENT is currently in the process of being adopted by the UK nuclear industry. The theory behind EVENT is described and its numerical implementation is outlined. Numerical results obtained by the code are compared with predictions of the Monte Carlo code MCBEND and also with the results from benchmark shielding experiments. In particular, results are presented for the ASPIS experimental configuration for both neutron and gamma ray calculations using the BUGLE 96 nuclear data library. (author)

MVP/GMVP Version 3. General purpose Monte Carlo codes for neutron and photon transport calculations based on continuous energy and multigroup methods (Translated document)

International Nuclear Information System (INIS)

Nagaya, Yasunobu; Okumura, Keisuke; Sakurai, Takeshi; Mori, Takamasa

2017-03-01

In order to realize fast and accurate Monte Carlo simulation of neutron and photon transport problems, two Monte Carlo codes MVP (continuous-energy method) and GMVP (multigroup method) have been developed at Japan Atomic Energy Agency. The codes have adopted a vectorized algorithm and have been developed for vector-type supercomputers. They also support parallel processing with a standard parallelization library MPI and thus a speed-up of Monte Carlo calculations can be achieved on general computing platforms. The first and second versions of the codes were released in 1994 and 2005, respectively. They have been extensively improved and new capabilities have been implemented. The major improvements and new capabilities are as follows: (1) perturbation calculation for effective multiplication factor, (2) exact resonant elastic scattering model, (3) calculation of reactor kinetics parameters, (4) photo-nuclear model, (5) simulation of delayed neutrons, (6) generation of group constants. This report describes the physical model, geometry description method used in the codes, new capabilities and input instructions. (author)

Testing a new multigroup inference approach to reconstructing past environmental conditions

Directory of Open Access Journals (Sweden)

Maria RIERADEVALL

2008-08-01

Full Text Available A new, quantitative, inference model for environmental reconstruction (transfer function, based for the first time on the simultaneous analysis of multigroup species, has been developed. Quantitative reconstructions based on palaeoecological transfer functions provide a powerful tool for addressing questions of environmental change in a wide range of environments, from oceans to mountain lakes, and over a range of timescales, from decades to millions of years. Much progress has been made in the development of inferences based on multiple proxies but usually these have been considered separately, and the different numeric reconstructions compared and reconciled post-hoc. This paper presents a new method to combine information from multiple biological groups at the reconstruction stage. The aim of the multigroup work was to test the potential of the new approach to making improved inferences of past environmental change by improving upon current reconstruction methodologies. The taxonomic groups analysed include diatoms, chironomids and chrysophyte cysts. We test the new methodology using two cold-environment training-sets, namely mountain lakes from the Pyrenees and the Alps. The use of multiple groups, as opposed to single groupings, was only found to increase the reconstruction skill slightly, as measured by the root mean square error of prediction (leave-one-out cross-validation, in the case of alkalinity, dissolved inorganic carbon and altitude (a surrogate for air-temperature, but not for pH or dissolved CO2. Reasons why the improvement was less than might have been anticipated are discussed. These can include the different life-forms, environmental responses and reaction times of the groups under study.

Using Multi-Group Confirmatory Factor Analysis to Evaluate Cross-Cultural Research: Identifying and Understanding Non-Invariance

Science.gov (United States)

Brown, Gavin T. L.; Harris, Lois R.; O'Quin, Chrissie; Lane, Kenneth E.

2017-01-01

Multi-group confirmatory factor analysis (MGCFA) allows researchers to determine whether a research inventory elicits similar response patterns across samples. If statistical equivalence in responding is found, then scale score comparisons become possible and samples can be said to be from the same population. This paper illustrates the use of…

TRIMARAN: a three dimensional multigroup P1 Monte Carlo code for criticality studies

International Nuclear Information System (INIS)

Ermumcu, G.; Gonnord, J.; Nimal, J.C.

1980-01-01

TRIMARAN is developed for safety analysis of nuclear components containing fissionable materials: shipping casks, storage and cooling pools, manufacture and reprocessing plants. It solves the transport equation by Monte Carlo method, in general three dimensional geometry with multigroup P1 approximation. A special representation of cross sections and numbers has been developed in order to reduce considerably the computing cost and allow this three dimensional code to compete with standard numerical program used in parametric studies

TRIMARAN: a three dimensional multigroup P1 Monte Carlo code for criticallity studies

International Nuclear Information System (INIS)

Ermuncu, G.; Gonnord, J.; Nimal, J.C.

1980-04-01

TRIMARAN is developed for safety analysis of nuclar components containing fissionnable materials: shipping casks, storage and cooling pools, manufacture and reprocessing plants. It solves the transport equation by Monte Carlo method in general three dimensional geometry with multigroup P1 approximation. A special representation of cross sections and numbers has been developed in order to reduce considerably the computing cost and allow this three dimensional code to compete with standard numerical program used in parametric studies

Case study: Beauty and the Beast 3D: benefits of 3D viewing for 2D to 3D conversion

Science.gov (United States)

Handy Turner, Tara

2010-02-01

From the earliest stages of the Beauty and the Beast 3D conversion project, the advantages of accurate desk-side 3D viewing was evident. While designing and testing the 2D to 3D conversion process, the engineering team at Walt Disney Animation Studios proposed a 3D viewing configuration that not only allowed artists to "compose" stereoscopic 3D but also improved efficiency by allowing artists to instantly detect which image features were essential to the stereoscopic appeal of a shot and which features had minimal or even negative impact. At a time when few commercial 3D monitors were available and few software packages provided 3D desk-side output, the team designed their own prototype devices and collaborated with vendors to create a "3D composing" workstation. This paper outlines the display technologies explored, final choices made for Beauty and the Beast 3D, wish-lists for future development and a few rules of thumb for composing compelling 2D to 3D conversions.

Developmental and Diurnal Expression of the Synaptosomal-Associated Protein 25 (Snap25) in the Rat Pineal Gland

DEFF Research Database (Denmark)

Karlsen, Anna S; Rath, Martin Fredensborg; Rohde, Kristian

2013-01-01

pineal gland but the biological importance of this is unknown. In this study, we demonstrate a high expression of mRNA encoding Snap25 in all parts of the rat pineal complex, the superficial-, and deep-pineal gland, as well as in the pineal stalk. Snap25 showed a low pineal expression during embryonic...... stages with a strong increase in expression levels just after birth. The expression showed no day/night variations. Neither removal of the sympathetic input to the pineal gland by superior cervical ganglionectomy nor bilateral decentralization of the superior cervical ganglia significantly affected...

Development of a mercury electromagnetic centrifugal pump for the SNAP-8 refractory boiler development program

Science.gov (United States)

Fuller, R. A.; Schnacke, A. W.

1974-01-01

An electromagnetic pump, in which pressure is developed in mercury because of the interaction of the magnetic field and current which flows as a result of the voltage induced in the mercury contained in the pump duct, was developed for the SNAP-8 refractory boiler test facility. Pump performance results are presented for ten duct configurations and two stator sizes. These test results were used to design and fabricate a pump which met the SNAP-8 criteria of 530 psi developed pressure at 12,500 lb/hr. The pump operated continuously for over 13,000 hours without failure or performance degradation. Included in this report are descriptions of the experimental equipment, measurement techniques, all experimental data, and an analysis of the electrical losses in the pump.

General solution of the multigroup spherical harmonics equations in R-Z geometry

International Nuclear Information System (INIS)

Matausek, M.

1983-01-01

In the present paper the generalization is performed of the procedure to solve multigroup spherical harmonics equations, which has originally been proposed and developed foe one-dimensional systems in cylindrical or spherical geometry, and later extended for special case of a two-dimensional system in r-z geometry. The expressions are derived for the axial and the radial dependence of the group values of the neutron flux moments, in the P-3 approximation of the spherical harmonics method, in a cylindrically symmetrical system with an arbitrary number of material regions in both r and z directions. In the special case of an axially homogeneous system, these expressions reduce to the relations derived previously. The analysis is performed of the possibilities to satisfy the boundary conditions in the case when the system considered represents an elementary reactor lattice cell and in the case when the system represents a reactor as a whole. The computational effort is estimated for system of a given configuration. (author)

AMZ, multigroup constant library for EXPANDA code, generated by NJOY code from ENDF/B-IV

International Nuclear Information System (INIS)

Chalhoub, E.S.; Moraes, Marisa de

1985-01-01

It is described a library of multigroup constants with 70 energy groups and 37 isotopes to fast reactor calculation. The cross sections, scattering matrices and self-shielding factors were generated by NJOY code and RGENDF interface program, from ENDF/B-IV'S evaluated data. The library is edited in adequated format to be used by EXPANDA code. (M.C.K.) [pt

Status of multigroup sensitivity profiles and covariance matrices available from the radiation shielding information center

International Nuclear Information System (INIS)

Roussin, R.W.; Drischler, J.D.; Marable, J.H.

1980-01-01

In recent years multigroup sensitivity profiles and covariance matrices have been added to the Radiation Shielding Information Center's Data Library Collection (DLC). Sensitivity profiles are available in a single package. DLC-45/SENPRO, and covariance matrices are found in two packages, DLC-44/COVERX and DLC-77/COVERV. The contents of these packages are described and their availability is discussed

Effects of environmental contaminants on snapping turtles of a tidal wetland

Energy Technology Data Exchange (ETDEWEB)

Albers, P H; Sileo, L; Mulhern, B M

1986-01-01

Snapping turtles (Chelydra serpentina) were collected from a brackish-water and a nearly freshwater area in the contaminated Hackensack Meadowlands of New Jersey and an uncontaminated freshwater area in Maryland to determine the effects of environmental contaminants on a resident wetland species. No turtles were observed or caught in Meadowlands at two trapping sites that were the most heavily contaminated by metals. Snapping turtles from the brackish-water area had an unusually low lipid content of body fat and reduced growth compared to turtles from the freshwater areas in New Jersey and Maryland. Despite the serious metal contamination of the Hackensack Meadowlands, the metal content of kidneys and livers from New Jersey turtles was low and not greatly different from that of the Maryland turtles. Organochlorine pesticide concentrations in body fat were generally low at all three study areas. Polychlorinated biphenyls (PCBs) concentrations in fat were highest in male turtles from the New Jersey brackish-water area. Analysis of blood for amino-levulinic acid dehydratase, albumin, glucose, hemoglobin, osmolatility, packed cell volume, total protein, triglycerides, and uric acid failed to reveal any differences among groups that would indicated physiological impairment related to contaminants.

Effects of environmental contaminants on snapping turtles of a tidal wetland

Science.gov (United States)

Albers, P.H.; Sileo, L.; Mulhern, B.M.

1986-01-01

Snapping turtles (Chelydra serpentina) were collected from a brackish-water and a nearly freshwater area in the contaminated Hackensack Meadowlands of New Jersey and an uncontaminated freshwater area in Maryland to determine the effects of environmental contaminants on a resident wetland species. No turtles were observed or caught in the Meadowlands at two trapping sites that were the most heavily contaminated by metals. Snapping turtles from the brackish-water area had an unusually low lipid content of body fat and reduced growth compared to turtles from the fresh-water areas in New Jersey and Maryland. Despite the serious metal contamination of the Hackensack Meadowlands, the metal content of kidneys and livers from New Jersey turtles was low and not greatly different from that of the Maryland turtles. Organochlorine pesticide concentrations in body fat were generally low at all three study areas. Polychlorinated biphenyls (PCBs) concentrations in fat were highest in male turtles from the New Jersey brackish-water area. Analysis of blood for amino-levulinic acid dehydratase, albumin, glucose, hemoglobin, osmolality, packed cell volume, total protein, triglycerides, and uric acid failed to reveal any differences among groups that would indicate physiological impairment related to contaminants.

Combined analytical-numerical procedure to solve multigroup spherical harmonics equations in two-dimensional r-z geometry

International Nuclear Information System (INIS)

Matausek, M.V.; Milosevic, M.

1986-01-01

In the present paper a generalization is performed of a procedure to solve multigroup spherical harmonics equations, which has originally been proposed and developed for one-dimensional systems in cylindrical or spherical geometry, and later extended for a special case of a two-dimensional system in r-z geometry. The expressions are derived for the axial and the radial dependence of the group values of the neutron flux moments, in the P-3 approximation of the spherical harmonics method, in a cylindrically symmetrical system with an arbitrary number of material regions in both r- and z-directions. In the special case of an axially homogeneous system, these expressions reduce to the relations derived previously. (author)

Experiment on neutron transmission through depleted uranium layers and analysis with DOT 3.5 and MCNP

International Nuclear Information System (INIS)

Oka, Y.; Kodama, T.; Akiyama, M.; Hashikura, H.; Kondo, S.

1987-01-01

The reaction rates in the multi-layers containing depleted uranium were measured by activation foils and micro-fission chambers. The analysis of the experiment was carried out by using the multi-group transport calculation code, DOT 3.5 and the continuous energy Monte Carlo code, MCNP. The multi-group calculation overpredicted the low energy reaction rates in the DU layers, while the continuous energy calculation agreed well. The multi-group and continuous energy calculation was compared for the one-dimensional transmission of iron spheres. The results revealed overprediction of the multi-group calculation near the fast neutron source. The averaging of the resonance shapes in generating the multi-group cross sections made minima of the resonance valleys higher than that of the pointwise cross section. This increased the scattering of the neutrons inside and caused the overprediction of the multi-group calculation

Integrative demographic modeling reveals population level impacts of PCB toxicity to juvenile snapping turtles

International Nuclear Information System (INIS)

Salice, Christopher J.; Rowe, Christopher L.; Eisenreich, Karen M.

2014-01-01

A significant challenge in ecotoxicology and risk assessment lies in placing observed contaminant effects in a meaningful ecological context. Polychlorinated biphenyls (PCBs) have been shown to affect juvenile snapping turtle survival and growth but the ecological significance of these effects is difficult to discern without a formal, population-level assessment. We used a demographic matrix model to explore the potential population-level effects of PCBs on turtles. Our model showed that effects of PCBs on juvenile survival, growth and size at hatching could translate to negative effects at the population level despite the fact that these life cycle components do not typically contribute strongly to population level processes. This research points to the utility of using integrative demographic modeling approaches to better understand contaminant effects in wildlife. The results indicate that population-level effects are only evident after several years, suggesting that for long-lived species, detecting adverse contaminant effects could prove challenging. -- Highlights: • Previous studies have shown the PCBs can impact juvenile snapping turtles. • We used a demographic model of turtles to evaluate population-level PCB effects. • PCB effects on turtles may translate to negative population responses. • Long-term monitoring is needed to detect contaminant effects on natural turtle populations. • Demographic models can improve our understanding contaminant ecotoxicity. -- A demographic model was used to show that PCB induced effects on young snapping turtles can result in adverse effects at the population level

Multi-group dynamic quantum secret sharing with single photons

Energy Technology Data Exchange (ETDEWEB)

Liu, Hongwei [School of Science and State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Ma, Haiqiang, E-mail: hqma@bupt.edu.cn [School of Science and State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Wei, Kejin [School of Science and State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Yang, Xiuqing [School of Science, Beijing Jiaotong University, Beijing 100044 (China); Qu, Wenxiu; Dou, Tianqi; Chen, Yitian; Li, Ruixue; Zhu, Wu [School of Science and State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876 (China)

2016-07-15

In this letter, we propose a novel scheme for the realization of single-photon dynamic quantum secret sharing between a boss and three dynamic agent groups. In our system, the boss can not only choose one of these three groups to share the secret with, but also can share two sets of independent keys with two groups without redistribution. Furthermore, the security of communication is enhanced by using a control mode. Compared with previous schemes, our scheme is more flexible and will contribute to a practical application. - Highlights: • A multi-group dynamic quantum secret sharing with single photons scheme is proposed. • Any one of the groups can be chosen to share secret through controlling the polarization of photons. • Two sets of keys can be shared simultaneously without redistribution.

New Multi-group Transport Neutronics (PHISICS) Capabilities for RELAP5-3D and its Application to Phase I of the OECD/NEA MHTGR-350 MW Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom; Cristian Rabiti; Andrea Alfonsi

2012-10-01

PHISICS is a neutronics code system currently under development at the Idaho National Laboratory (INL). Its goal is to provide state of the art simulation capability to reactor designers. The different modules for PHISICS currently under development are a nodal and semi-structured transport core solver (INSTANT), a depletion module (MRTAU) and a cross section interpolation (MIXER) module. The INSTANT module is the most developed of the mentioned above. Basic functionalities are ready to use, but the code is still in continuous development to extend its capabilities. This paper reports on the effort of coupling the nodal kinetics code package PHISICS (INSTANT/MRTAU/MIXER) to the thermal hydraulics system code RELAP5-3D, to enable full core and system modeling. This will enable the possibility to model coupled (thermal-hydraulics and neutronics) problems with more options for 3D neutron kinetics, compared to the existing diffusion theory neutron kinetics module in RELAP5-3D (NESTLE). In the second part of the paper, an overview of the OECD/NEA MHTGR-350 MW benchmark is given. This benchmark has been approved by the OECD, and is based on the General Atomics 350 MW Modular High Temperature Gas Reactor (MHTGR) design. The benchmark includes coupled neutronics thermal hydraulics exercises that require more capabilities than RELAP5-3D with NESTLE offers. Therefore, the MHTGR benchmark makes extensive use of the new PHISICS/RELAP5-3D coupling capabilities. The paper presents the preliminary results of the three steady state exercises specified in Phase I of the benchmark using PHISICS/RELAP5-3D.

The Snapping Elbow Syndrome as a Reason for Chronic Elbow Neuralgia in a Tennis Player – MR, US and Sonoelastography Evaluation

International Nuclear Information System (INIS)

Łasecki, Mateusz; Olchowy, Cyprian; Pawluś, Aleksander; Zaleska-Dorobisz, Urszula

2014-01-01

Ulnar neuropathy is the second most common peripheral nerve neuropathy after median neuropathy, with an incidence of 25 cases per 100 000 men and 19 cases per 100 000 women each year. Skipping (snapping) elbow syndrome is an uncommon cause of pain in the posterior-medial elbow area, sometimes complicated by injury of the ulnar nerve. One of the reason is the dislocation of the abnormal insertion of the medial triceps head over the medial epicondyle during flexion and extension movements. Others are: lack of the Osboune fascia leading to ulnar nerve instability and focal soft tissue tumors (fibromas, lipomas, etc). Recurrent subluxation of the nerve at the elbow results in a tractional and frictional neuritis with classical symptoms of peripheral neuralgia. As far as we know snapping triceps syndrome had never been evaluated in sonoelastography. A 28yo semi-professional left handed tennis player was complaining about pain in posterior-medial elbow area. Initial US examination suggest golfers elbow syndrome which occurs quite commonly and has a prevalence of 0.3–0.6% in males and 0–3–1.1% in women and may be associated (approx. 50% of cases) with ulnar neuropathy. However subsequently made MRI revealed unusual distal triceps anatomy, moderate ulnar nerve swelling and lack of medial epicondylitis symptoms. Followed (second) US examination and sonoelastography have detected slipping of the both ulnar nerve and the additional band of the medial triceps head. Snapping elbow syndrome is a poorly known medical condition, sometimes misdiagnosed as the medial epicondylitis. It describes a broad range of pathologies and anatomical abnormalities. One of the most often reasons is the slipping of the ulnar nerve as the result of the Osborne fascia/anconeus epitrochlearis muscle absence. Simultaneously presence of two or more “snapping reasons” is rare but should be always taken under consideration. There are no sonoelastography studies describing golfers elbow syndrome

Snapping turtles (Chelydra serpentina) as biomonitors of lead contamination of the Big River in Missouri`s Old Lead Belt

Energy Technology Data Exchange (ETDEWEB)

Overmann, S.R.; Krajicek, J.J. [Southeast Missouri State Univ., Cape Girardeau, MO (United States). Dept. of Biology

1995-04-01

The usefulness of common snapping turtles (Chelydra serpentina) as biomonitors of lead (Pb) contamination of aquatic ecosystems was assessed. Thirty-seven snapping turtles were collected from three sites on the Big River, an Ozarkian stream contaminated with Pb mine tailings. Morphometric measurements, tissue Pb concentrations (muscle, blood, bone, carapace, brain, and liver), {delta}-aminolevulinic acid dehydratase ({delta}-ALAD) activity, hematocrit, hemoglobin, plasma glucose, osmolality, and chloride ion content were measured. The data showed no effects of Pb contamination on capture success or morphological measurements. Tissue Pb concentrations were related to capture location. Hematocrit, plasma osmolality, plasma glucose, and plasma chloride ion content were not significantly different with respect to capture location. The {delta}-ALAD activity levels were decreased in turtles taken from contaminated sites. Lead levels in the Big River do not appear to be adversely affecting the snapping turtles of the river. Chelydra serpentina is a useful species for biomonitoring of Pb-contaminated aquatic environments.

Investigations of safety-related parameters applying a new multi-group diffusion code for HTR transients

International Nuclear Information System (INIS)

Kasselmann, S.; Druska, C.; Lauer, A.

2010-01-01

The energy spectra of fast and thermal neutrons from fission reactions in the FZJ code TINTE are modelled by two broad energy groups. Present demands for increased numerical accuracy led to the question of how precise the 2-group approximation is compared to a multi-group model. Therefore a new simulation program called MGT (Multi Group TINTE) has recently been developed which is able to handle up to 43 energy groups. Furthermore, an internal spectrum calculation for the determination of cross-sections can be performed for each time step and location within the reactor. In this study the multi-group energy models are compared to former calculations with only two energy groups. Different scenarios (normal operation and design-basis accidents) have been defined for a high temperature pebble bed reactor design with annular core. The effect of an increasing number of energy groups on safety-related parameters like the fuel and coolant temperature, the nuclear heat source or the xenon concentration is studied. It has been found that for the studied scenarios the use of up to 8 energy groups is a good trade-off between precision and a tolerable amount of computing time. (orig.)

Refined 3d-3d correspondence

Energy Technology Data Exchange (ETDEWEB)

Alday, Luis F.; Genolini, Pietro Benetti; Bullimore, Mathew; Loon, Mark van [Mathematical Institute, University of Oxford, Andrew Wiles Building,Radcliffe Observatory Quarter, Woodstock Road, Oxford, OX2 6GG (United Kingdom)

2017-04-28

We explore aspects of the correspondence between Seifert 3-manifolds and 3d N=2 supersymmetric theories with a distinguished abelian flavour symmetry. We give a prescription for computing the squashed three-sphere partition functions of such 3d N=2 theories constructed from boundary conditions and interfaces in a 4d N=2{sup ∗} theory, mirroring the construction of Seifert manifold invariants via Dehn surgery. This is extended to include links in the Seifert manifold by the insertion of supersymmetric Wilson-’t Hooft loops in the 4d N=2{sup ∗} theory. In the presence of a mass parameter for the distinguished flavour symmetry, we recover aspects of refined Chern-Simons theory with complex gauge group, and in particular construct an analytic continuation of the S-matrix of refined Chern-Simons theory.

Sub-cell balanced nodal expansion methods using S4 eigenfunctions for multi-group SN transport problems in slab geometry

International Nuclear Information System (INIS)

Hong, Ser Gi; Lee, Deokjung

2015-01-01

A highly accurate S 4 eigenfunction-based nodal method has been developed to solve multi-group discrete ordinate neutral particle transport problems with a linearly anisotropic scattering in slab geometry. The new method solves the even-parity form of discrete ordinates transport equation with an arbitrary S N order angular quadrature using two sub-cell balance equations and the S 4 eigenfunctions of within-group transport equation. The four eigenfunctions from S 4 approximation have been chosen as basis functions for the spatial expansion of the angular flux in each mesh. The constant and cubic polynomial approximations are adopted for the scattering source terms from other energy groups and fission source. A nodal method using the conventional polynomial expansion and the sub-cell balances was also developed to be used for demonstrating the high accuracy of the new methods. Using the new methods, a multi-group eigenvalue problem has been solved as well as fixed source problems. The numerical test results of one-group problem show that the new method has third-order accuracy as mesh size is finely refined and it has much higher accuracies for large meshes than the diamond differencing method and the nodal method using sub-cell balances and polynomial expansion of angular flux. For multi-group problems including eigenvalue problem, it was demonstrated that the new method using the cubic polynomial approximation of the sources could produce very accurate solutions even with large mesh sizes. (author)

YouDash3D: exploring stereoscopic 3D gaming for 3D movie theaters

Science.gov (United States)

Schild, Jonas; Seele, Sven; Masuch, Maic

2012-03-01

Along with the success of the digitally revived stereoscopic cinema, events beyond 3D movies become attractive for movie theater operators, i.e. interactive 3D games. In this paper, we present a case that explores possible challenges and solutions for interactive 3D games to be played by a movie theater audience. We analyze the setting and showcase current issues related to lighting and interaction. Our second focus is to provide gameplay mechanics that make special use of stereoscopy, especially depth-based game design. Based on these results, we present YouDash3D, a game prototype that explores public stereoscopic gameplay in a reduced kiosk setup. It features live 3D HD video stream of a professional stereo camera rig rendered in a real-time game scene. We use the effect to place the stereoscopic effigies of players into the digital game. The game showcases how stereoscopic vision can provide for a novel depth-based game mechanic. Projected trigger zones and distributed clusters of the audience video allow for easy adaptation to larger audiences and 3D movie theater gaming.

Preclinical in vitro and in vivo evaluation of [11C]SNAP-7941 – the first PET tracer for the melanin concentrating hormone receptor 1

International Nuclear Information System (INIS)

Philippe, Cécile; Nics, Lukas; Zeilinger, Markus; Kuntner, Claudia; Wanek, Thomas; Mairinger, Severin; Shanab, Karem; Spreitzer, Helmut; Viernstein, Helmut; Wadsak, Wolfgang; Mitterhauser, Markus

2013-01-01

Introduction: Due to its involvement in a variety of pathologies (obesity, diabetes, gut inflammation and depression), the melanin concentrating hormone receptor 1 (MCHR1) is a new target for the treatment of these lifestyle diseases. We previously presented the radiosynthesis of [ 11 C]SNAP-7941, the first potential PET tracer for the MCHR1. Methods: We herein present its in vitro and in vivo evaluation, including binding affinity, plasma stability, stability against liver mircrosomes and carboxylesterase, lipohilicity, biodistribution, in vivo metabolism and small-animal PET. Results: [ 11 C]SNAP-7941 evinced high stability against liver microsomes, carboxylesterase and in human plasma. The first small-animal PET experiments revealed a 5 fold increased brain uptake after Pgp/BCRP inhibition. Therefore, it can be assumed that [ 11 C]SNAP-7941 is a Pgp/BCRP substrate. No metabolites were found in brain. Conclusion: On the basis of these experiments with healthy rats, the suitability of [ 11 C]SNAP-7941 for the visualisation of central and peripheral MCHR1 remains speculative

Research to Understand Milk Consumption Behaviors in a Food-Insecure Low-Income SNAP Population in the US

Directory of Open Access Journals (Sweden)

Karla Jaye Finnell

2017-09-01

Full Text Available Milk, due to its affordability and nutritional value, can fortify the diets of families that experience food insecurity or find a high-quality diet cost-prohibitive. However, it can also be a leading source of excess calories and saturated fat. Yet, little is known about what influences consumer behavior of Supplemental Nutrition Assistance Program (SNAP recipients toward the type of milk used or the prevalence of low-fat milk use among this population. This cross-sectional telephone survey of SNAP recipients (n = 520 documented that 7.5% of this population usually consumes low-fat milk, a prevalence that lags behind national figures (34.4% for the same time-period. There was a weak association between sociodemographic characteristics of SNAP recipients and low-fat milk use. Instead, less low-fat milk consumption was associated with a knowledge gap and misperceptions of the nutritional properties of the different types of milk. Promoting low-fat milk use by correcting these misperceptions can improve the diet of America’s low-income population and reduce food insecurity by maximizing the nutritional value of the foods consumed.

Multigroup transport calculations of critical and fuel assemblies with taking into account the scattering anisotropy

International Nuclear Information System (INIS)

Rubin, I.E.; Dneprovskaya, N.M.

2005-01-01

A technique for calculation of reactor lattices by means of the transmission probabilities with taking into account the scattering anisotropy is generalized for the multigroup case. The errors of the calculated multiplication coefficients and energy release distributions do noe exceed practically the errors, of these values, obtained by the Monte Carlo method. The proposed method is most effective when determining the small difference effects [ru

Validation of multigroup neutron cross sections for the Advanced Neutron Source against the FOEHN critical experimental measurements

International Nuclear Information System (INIS)

Smith, L.A.; Gehin, J.C.; Worley, B.A.; Renier, J.P.

1994-01-01

The FOEHN critical experiments were analyzed to validate the use of multigroup cross sections in the design of the Advanced Neutron Source. Eleven critical configurations were evaluated using the KENO, DORT, and VENTURE neutronics codes. Eigenvalue and power density profiles were computed and show very good agreement with measured values

SNAP 19 Pioneer F and G. Final Report

Science.gov (United States)

1973-06-01

The generator developed for the Pioneer mission evolved from the SNAP 19 RTG`s launched aboard the NIMBUS III spacecraft. In order to satisfy the power requirements and environment of earth escape trajectory, significant modifications were made to the thermoelectric converter, heat source, and structural configuration. Specifically, a TAGS 2N thermoelectric couple was designed to provide higher efficiency and improved long term power performance, and the electrical circuitry was modified to yield very low magnetic field from current flow in the RTG. A new heat source was employed to satisfy operational requirements and its integration with the generator required alteration to the method of providing support to the fuel capsule.

The SNARE protein SNAP23 and the SNARE-interacting protein Munc18c in human skeletal muscle are implicated in insulin resistance/type 2 diabetes

DEFF Research Database (Denmark)

Boström, Pontus; Andersson, Linda; Vind, Birgitte

2010-01-01

/cytosolic compartment in the patients with the type 2 diabetes. Expression of the SNARE-interacting protein Munc18c was higher in skeletal muscle from patients with type 2 diabetes. Studies in L6 cells showed that Munc18c promoted the expression of SNAP23. CONCLUSIONS: We have translated our previous in vitro results......OBJECTIVE: Our previous studies suggest that the SNARE protein synaptosomal-associated protein of 23 kDa (SNAP23) is involved in the link between increased lipid levels and insulin resistance in cardiomyocytes. The objective was to determine whether SNAP23 may also be involved in the known...... association between lipid accumulation in skeletal muscle and insulin resistance/type 2 diabetes in humans, as well as to identify a potential regulator of SNAP23. RESEARCH DESIGN AND METHODS: We analyzed skeletal muscle biopsies from patients with type 2 diabetes and healthy, insulin-sensitive control...

1-D hybrid code for FRM start-up

International Nuclear Information System (INIS)

Stark, R.A.; Miley, G.H.

1982-01-01

A one-D hybrid has been developed to study the start-up of the FRM via neutral-beam injection. The code uses a multi-group numerical model originally developed by J. Willenberg to describe fusion product dynamics in a solenoidal plasma. Earlier we described such a model for use in determining self-consistent ion currents and magnetic fields in FRM start-up. However, consideration of electron dynamics during start-up indicate that the electron current will oppose the injected ion current and may even foil the attempt to achieve reversal. For this reason, we have combined the multi-group ion (model) with a fluid treatment for electron dynamics to form the hybrid code FROST (Field Reversed One-dimensional STart-up). The details of this merger, along with sample results of operation of FROST, are given

WIMS-D library update

International Nuclear Information System (INIS)

2007-05-01

WIMS-D (Winfrith Improved Multigroup Scheme-D) is the name of a family of software packages for reactor lattice calculations and is one of the few reactor lattice codes in the public domain and available on noncommercial terms. WIMSD-5B has recently been released from the OECD Nuclear Energy Agency Data Bank, and features major improvements in machine portability, as well as incorporating a few minor corrections. This version supersedes WIMS-D/4, which was released by the Winfrith Technology Centre in the United Kingdom for IBM machines and has been adapted for various other computer platforms in different laboratories. The main weakness of the WIMS-D package is the multigroup constants library, which is based on very old data. The relatively good performance of WIMS-D is attributed to a series of empirical adjustments to the multigroup data. However, the adjustments are not always justified on the basis of more accurate and recent experimental measurements. Following the release of new and revised evaluated nuclear data files, it was felt that the performance of WIMS-D could be improved by updating the associated library. The WIMS-D Library Update Project (WLUP) was initiated in the early 1990s with the support of the IAEA. This project consisted of voluntary contributions from a large number of participants. Several benchmarks for testing the library were identified and analysed, the WIMSR module of the NJOY code system was upgraded and the author of NJOY accepted the proposed updates for the official code system distribution. A detailed parametric study was performed to investigate the effects of various data processing input options on the integral results. In addition, the data processing methods for the main reactor materials were optimized. Several partially updated libraries were produced for testing purposes. The final stage of the WLUP was organized as a coordinated research project (CRP) in order to speed up completion of the fully updated library

Synaptosomal Protein of 25 kDa (Snap25 Polymorphisms Associated with Glycemic Parameters in Type 2 Diabetes Patients

Directory of Open Access Journals (Sweden)

Nasser M. Al-Daghri

2016-01-01

Full Text Available A possible role of Snap25 polymorphisms in type 2 diabetes mellitus (T2DM was evaluated by analyzing three SNPs within intron 1 in a region known to affect the gene expression in vitro. Genomic DNA from 1019 Saudi individuals (489 confirmed T2DM and 530 controls was genotyped for SNPs rs363039, rs363043, and rs363050 in Snap25 using the TaqMan Genotyping Assay. Significantly higher levels of fasting glucose and HbA1c were detected in T2DM patients carrying the rs363050 (AG/GG genotypes compared to the (AA genotype (f=4.41, df=1, and p=0.03 and f=5.31, df=1, and p=0.03, resp.. In these same patients, insulin levels were significantly decreased compared to the (AA individuals (f=7.29, df=1, and p=0.009. Significant associations were detected between rs363050 (AG/GG genotypes and increasing fasting glucose levels (p=0.01 and OR: 1.05, HbA1c levels (OR: 5.06 and p=0.02, and lower insulinemia (p=0.03 and OR: 0.95 in T2DM patients. The minor Snap25 rs363050 (G allele, which results in a reduced expression of Snap25, is associated with altered glycemic parameters in T2DM possibly because of reduced functionality in the exocytotic machinery leading to suboptimal release of insulin.

3D-mallien muokkaus 3D-tulostamista varten CAD-ohjelmilla

OpenAIRE

Lehtimäki, Jarmo

2013-01-01

Insinöörityössäni käsitellään 3D-mallien tulostamista ja erityisesti 3D-mallien mallintamista niin, että kappaleiden valmistaminen 3D-tulostimella onnistuisi mahdollisimman hyvin. Työ tehtiin Prohoc Oy:lle, joka sijaitsee Vaasassa. 3D-tulostuspalveluun tuli jatkuvasti 3D-malleja, joiden tulostuksessa oli ongelmia. Työssäni tutkin näiden ongelmien syntyä ja tein ohjeita eri 3D-mallinnusohjelmille, joiden tarkoituksena on auttaa tekemään helpommin tulostettavia 3D-malleja. Työhön kuului myös et...

3D imaging, 3D printing and 3D virtual planning in endodontics.

Science.gov (United States)

Shah, Pratik; Chong, B S

2018-03-01

The adoption and adaptation of recent advances in digital technology, such as three-dimensional (3D) printed objects and haptic simulators, in dentistry have influenced teaching and/or management of cases involving implant, craniofacial, maxillofacial, orthognathic and periodontal treatments. 3D printed models and guides may help operators plan and tackle complicated non-surgical and surgical endodontic treatment and may aid skill acquisition. Haptic simulators may assist in the development of competency in endodontic procedures through the acquisition of psycho-motor skills. This review explores and discusses the potential applications of 3D printed models and guides, and haptic simulators in the teaching and management of endodontic procedures. An understanding of the pertinent technology related to the production of 3D printed objects and the operation of haptic simulators are also presented.

Examining Internet Access and Social Media Application Use for Online Nutrition Education in SNAP-Ed Participants in Rural Illinois.

Science.gov (United States)

Loehmer, Emily; Smith, Sylvia; McCaffrey, Jennifer; Davis, Jeremy

2018-01-01

To examine Internet access and interest in receiving nutrition education via social media applications among low-income adults participating in the Supplemental Nutrition Assistance Program Education (SNAP-Ed). A cross-sectional survey was distributed during 25 SNAP-Ed classes throughout the 16 southernmost counties of Illinois. From 188 responses, the majority of participants had Internet access (76%). Among participants aged 18-32 years (n = 51), 92% owned a smartphone with Internet access and 57% indicated that they would use online nutrition education, with most interest in e-mail (41%), Facebook (40%), and text messaging (35%). There was little interest in using blogs, Vine, Twitter, Tumblr, and Pinterest. Overall, 49% of middle-aged adults aged 33-64 years and 87% of seniors aged ≥65 years reported they would not use online nutrition education. Results indicated similar Internet accessibility in southern Illinois among low-income populations compared with national rural rates. Interest in using online nutrition education varied among SNAP-Ed participants according to age. Young adults appeared to be the most captive audience regarding online nutrition education. Results may be useful to agencies implementing SNAP-Ed to supplement current curriculum with online nutrition education for audiences aged ≤32 years. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

A 3d-3d appetizer

Energy Technology Data Exchange (ETDEWEB)

Pei, Du; Ye, Ke [Walter Burke Institute for Theoretical Physics, California Institute of Technology, Pasadena, CA, 91125 (United States)

2016-11-02

We test the 3d-3d correspondence for theories that are labeled by Lens spaces. We find a full agreement between the index of the 3d N=2 “Lens space theory” T[L(p,1)] and the partition function of complex Chern-Simons theory on L(p,1). In particular, for p=1, we show how the familiar S{sup 3} partition function of Chern-Simons theory arises from the index of a free theory. For large p, we find that the index of T[L(p,1)] becomes a constant independent of p. In addition, we study T[L(p,1)] on the squashed three-sphere S{sub b}{sup 3}. This enables us to see clearly, at the level of partition function, to what extent G{sub ℂ} complex Chern-Simons theory can be thought of as two copies of Chern-Simons theory with compact gauge group G.

The isotope density inverse problem in multigroup neutron transport

International Nuclear Information System (INIS)

Zazula, J.M.

1981-01-01

The inverse problem for stationary multigroup anisotropic neutron transport is discussed in order to search for isotope densities in multielement medium. The spatial- and angular-integrated form of neutron transport equation, in terms of the flux in a group - density of an element spatial correlation, leads to a set of integral functionals for the densities weighted by the group fluxes. Some methods of approximation to make the problem uniquently solvable are proposed. Particularly P 0 angular flux information and the spherically-symetrical geometry of an infinite medium are considered. The numerical calculation using this method related to sooner evaluated direct problem data gives promising agreement with primary densities. This approach would be the basis for further application in an elemental analysis of a medium, using an isotopic neutron source and a moving, energy-dependent neutron detector. (author)

Neutron-photon multigroup cross sections for neutron energies less than or equal to400 MeV. Revision 1

International Nuclear Information System (INIS)

Alsmiller, R.G. Jr.; Barnes, J.M.; Drischler, J.D.

1986-02-01

Multigroup cross sections (66 neutron groups and 22 photon groups) are described for neutron energies from thermal to 400 MeV. The elements considered are hydrogen, 10 B, 11 B, carbon, nitrogen, oxygen, sodium, magnesium, aluminum, silicon, sulfur, potassium, calcium, chromium, iron, nickel, tungsten, and lead. The cross section data presented are a revision of similar data presented previously. In the case of iron, transport calculations using the earlier and the revised cross sections are presented and compared, and significant differences are found. The revised cross sections are available from the Radiation Shielding information Center of the Oak Ridge National Laboratory. 32 refs., 5 figs., 3 tabs

Quasi 3D dosimetry (EPID, conventional 2D/3D detector matrices)

International Nuclear Information System (INIS)

Bäck, A

2015-01-01

Patient specific pretreatment measurement for IMRT and VMAT QA should preferably give information with a high resolution in 3D. The ability to distinguish complex treatment plans, i.e. treatment plans with a difference between measured and calculated dose distributions that exceeds a specified tolerance, puts high demands on the dosimetry system used for the pretreatment measurements and the results of the measurement evaluation needs a clinical interpretation. There are a number of commercial dosimetry systems designed for pretreatment IMRT QA measurements. 2D arrays such as MapCHECK ® (Sun Nuclear), MatriXX Evolution (IBA Dosimetry) and OCTAVIOUS ® 1500 (PTW), 3D phantoms such as OCTAVIUS ® 4D (PTW), ArcCHECK ® (Sun Nuclear) and Delta 4 (ScandiDos) and software for EPID dosimetry and 3D reconstruction of the dose in the patient geometry such as EPIDose TM (Sun Nuclear) and Dosimetry Check TM (Math Resolutions) are available. None of those dosimetry systems can measure the 3D dose distribution with a high resolution (full 3D dose distribution). Those systems can be called quasi 3D dosimetry systems. To be able to estimate the delivered dose in full 3D the user is dependent on a calculation algorithm in the software of the dosimetry system. All the vendors of the dosimetry systems mentioned above provide calculation algorithms to reconstruct a full 3D dose in the patient geometry. This enables analyzes of the difference between measured and calculated dose distributions in DVHs of the structures of clinical interest which facilitates the clinical interpretation and is a promising tool to be used for pretreatment IMRT QA measurements. However, independent validation studies on the accuracy of those algorithms are scarce. Pretreatment IMRT QA using the quasi 3D dosimetry systems mentioned above rely on both measurement uncertainty and accuracy of calculation algorithms. In this article, these quasi 3D dosimetry systems and their use in patient specific

PUFF-IV, Code System to Generate Multigroup Covariance Matrices from ENDF/B-VI Uncertainty Files

International Nuclear Information System (INIS)

2007-01-01

1 - Description of program or function: The PUFF-IV code system processes ENDF/B-VI formatted nuclear cross section covariance data into multigroup covariance matrices. PUFF-IV is the newest release in this series of codes used to process ENDF uncertainty information and to generate the desired multi-group correlation matrix for the evaluation of interest. This version includes corrections and enhancements over previous versions. It is written in Fortran 90 and allows for a more modular design, thus facilitating future upgrades. PUFF-IV enhances support for resonance parameter covariance formats described in the ENDF standard and now handles almost all resonance parameter covariance information in the resolved region, with the exception of the long range covariance sub-subsections. PUFF-IV is normally used in conjunction with an AMPX master library containing group averaged cross section data. Two utility modules are included in this package to facilitate the data interface. The module SMILER allows one to use NJOY generated GENDF files containing group averaged cross section data in conjunction with PUFF-IV. The module COVCOMP allows one to compare two files written in COVERX format. 2 - Methods: Cross section and flux values on a 'super energy grid,' consisting of the union of the required energy group structure and the energy data points in the ENDF/B-V file, are interpolated from the input cross sections and fluxes. Covariance matrices are calculated for this grid and then collapsed to the required group structure. 3 - Restrictions on the complexity of the problem: PUFF-IV cannot process covariance information for energy and angular distributions of secondary particles. PUFF-IV does not process covariance information in Files 34 and 35; nor does it process covariance information in File 40. These new formats will be addressed in a future version of PUFF

Analysis of sensitive questions across cultures : An application of multigroup item randomized response theory to sexual attitudes and behavior

NARCIS (Netherlands)

de Jong, M.G.; Pieters, R.; Stremersch, S.

2012-01-01

Answers to sensitive questions are prone to social desirability bias. If not properly addressed, the validity of the research can be suspect. This article presents multigroup item randomized response theory (MIRRT) to measure self-reported sensitive topics across cultures. The method was

Linear triangle finite element formulation for multigroup neutron transport analysis with anisotropic scattering

Energy Technology Data Exchange (ETDEWEB)

Lillie, R.A.; Robinson, J.C.

1976-05-01

The discrete ordinates method is the most powerful and generally used deterministic method to obtain approximate solutions of the Boltzmann transport equation. A finite element formulation, utilizing a canonical form of the transport equation, is here developed to obtain both integral and pointwise solutions to neutron transport problems. The formulation is based on the use of linear triangles. A general treatment of anisotropic scattering is included by employing discrete ordinates-like approximations. In addition, multigroup source outer iteration techniques are employed to perform group-dependent calculations. The ability of the formulation to reduce substantially ray effects and its ability to perform streaming calculations are demonstrated by analyzing a series of test problems. The anisotropic scattering and multigroup treatments used in the development of the formulation are verified by a number of one-dimensional comparisons. These comparisons also demonstrate the relative accuracy of the formulation in predicting integral parameters. The applicability of the formulation to nonorthogonal planar geometries is demonstrated by analyzing a hexagonal-type lattice. A small, high-leakage reactor model is analyzed to investigate the effects of varying both the spatial mesh and order of angular quadrature. This analysis reveals that these effects are more pronounced in the present formulation than in other conventional formulations. However, the insignificance of these effects is demonstrated by analyzing a realistic reactor configuration. In addition, this final analysis illustrates the importance of incorporating anisotropic scattering into the finite element formulation. 8 tables, 29 figures.

Linear triangle finite element formulation for multigroup neutron transport analysis with anisotropic scattering

International Nuclear Information System (INIS)

Lillie, R.A.; Robinson, J.C.

1976-05-01

The discrete ordinates method is the most powerful and generally used deterministic method to obtain approximate solutions of the Boltzmann transport equation. A finite element formulation, utilizing a canonical form of the transport equation, is here developed to obtain both integral and pointwise solutions to neutron transport problems. The formulation is based on the use of linear triangles. A general treatment of anisotropic scattering is included by employing discrete ordinates-like approximations. In addition, multigroup source outer iteration techniques are employed to perform group-dependent calculations. The ability of the formulation to reduce substantially ray effects and its ability to perform streaming calculations are demonstrated by analyzing a series of test problems. The anisotropic scattering and multigroup treatments used in the development of the formulation are verified by a number of one-dimensional comparisons. These comparisons also demonstrate the relative accuracy of the formulation in predicting integral parameters. The applicability of the formulation to nonorthogonal planar geometries is demonstrated by analyzing a hexagonal-type lattice. A small, high-leakage reactor model is analyzed to investigate the effects of varying both the spatial mesh and order of angular quadrature. This analysis reveals that these effects are more pronounced in the present formulation than in other conventional formulations. However, the insignificance of these effects is demonstrated by analyzing a realistic reactor configuration. In addition, this final analysis illustrates the importance of incorporating anisotropic scattering into the finite element formulation. 8 tables, 29 figures

Synergism of the method of characteristic, R-functions and diffusion solution for accurate representation of 3D neutron interactions in research reactors using the AGENT code system

International Nuclear Information System (INIS)

Hursin, Mathieu; Xiao Shanjie; Jevremovic, Tatjana

2006-01-01

This paper summarizes the theoretical and numerical aspects of the AGENT code methodology accurately applied for detailed three-dimensional (3D) multigroup steady-state modeling of neutron interactions in complex heterogeneous reactor domains. For the first time we show the fine-mesh neutron scalar flux distribution in Purdue research reactor (that was built over forty years ago). The AGENT methodology is based on the unique combination of the three theories: the method of characteristics (MOC) used to simulate the neutron transport in two-dimensional (2D) whole core heterogeneous calculation, the theory of R-functions used as a mathematical tool to describe the true geometry and fuse with the MOC equations, and one-dimensional (1D) higher-order diffusion correction of 2D transport model to account for full 3D heterogeneous whole core representation. The synergism between the radial 2D transport and the 1D axial transport (to take into account the axial neutron interactions and leakage), called the 2D/1D method (used in DeCART and CHAPLET codes), provides a 3D computational solution. The unique synergism between the AGENT geometrical algorithm capable of modeling any current or future reactor core geometry and 3D neutron transport methodology is described in details. The 3D AGENT accuracy and its efficiency are demonstrated showing the eigenvalues, point-wise flux and reaction rate distributions in representative reactor geometries. The AGENT code, comprising this synergism, represents a building block of the computational system, called the virtual reactor. Its main purpose is to perform 'virtual' experiments and demonstrations of various mainly university research reactor experiments

3D MR cisternography to identify distal dural rings. Comparison of 3D-CISS and 3D-SPACE sequences

International Nuclear Information System (INIS)

Watanabe, Yoshiyuki; Makidono, Akari; Nakamura, Miho; Saida, Yukihisa

2011-01-01

The distal dural ring (DDR) is an anatomical landmark used to distinguish intra- and extradural aneurysms. We investigated identification of the DDR using 2 three-dimensional (3D) magnetic resonance (MR) cisternography sequences-3D constructive interference in steady state (CISS) and 3D sampling perfection with application optimized contrasts using different flip angle evolutions (SPACE)-at 3.0 tesla. Ten healthy adult volunteers underwent imaging with 3D-CISS, 3D-SPACE, and time-of-flight (TOF) MR angiography (TOF-MRA) sequences at 3.0T. We analyzed DDR identification and internal carotid artery (ICA) signal intensity and classified the shape of the carotid cave. We identified the DDR using both 3D-SPACE and 3D-CISS, with no significant difference between the sequences. Visualization of the outline of the ICA in the cavernous sinus (CS) was significantly clearer with 3D-SPACE than 3D-CISS. In the CS and petrous portions, signal intensity was lower with 3D-SPACE, and the flow void was poor with 3D-CISS in some subjects. We identified the DDR with both 3D-SPACE and 3D-CISS, but the superior contrast of the ICA in the CS using 3D-SPACE suggests the superiority of this sequence for evaluating the DDR. (author)

The analytical solution to the 1D diffusion equation in heterogeneous media

International Nuclear Information System (INIS)

Ganapol, B.D.; Nigg, D.W.

2011-01-01

The analytical solution to the time-independent multigroup diffusion equation in heterogeneous plane cylindrical and spherical media is presented. The solution features the simplicity of the one-group formulation while addressing the complication of multigroup diffusion in a fully heterogeneous medium. Beginning with the vector form of the diffusion equation, the approach, based on straightforward mathematics, resolves a set of coupled second order ODEs. The analytical form is facilitated through matrix diagonalization of the neutron interaction matrix rendering the multigroup solution as a series of one-group solutions which, when re-assembled, gives the analytical solution. Customized Eigenmode solutions of the one-group diffusion operator then represent the homogeneous solution in a uniform spatial domain. Once the homogeneous solution is known, the particular solution naturally emerges through variation of parameters. The analytical expression is then numerically implemented through recurrence. Finally, we apply the theory to assess the accuracy of a second order finite difference scheme and to a 1D slab BWR reactor in the four-group approximation. (author)

3D video

CERN Document Server

Lucas, Laurent; Loscos, Céline

2013-01-01

While 3D vision has existed for many years, the use of 3D cameras and video-based modeling by the film industry has induced an explosion of interest for 3D acquisition technology, 3D content and 3D displays. As such, 3D video has become one of the new technology trends of this century.The chapters in this book cover a large spectrum of areas connected to 3D video, which are presented both theoretically and technologically, while taking into account both physiological and perceptual aspects. Stepping away from traditional 3D vision, the authors, all currently involved in these areas, provide th

3D composite image, 3D MRI, 3D SPECT, hydrocephalus

International Nuclear Information System (INIS)

Mito, T.; Shibata, I.; Sugo, N.; Takano, M.; Takahashi, H.

2002-01-01

The three-dimensional (3D)SPECT imaging technique we have studied and published for the past several years is an analytical tool that permits visual expression of the cerebral circulation profile in various cerebral diseases. The greatest drawback of SPECT is that the limitation on precision of spacial resolution makes intracranial localization impossible. In 3D SPECT imaging, intracranial volume and morphology may vary with the threshold established. To solve this problem, we have produced complimentarily combined SPECT and helical-CT 3D images by means of general-purpose visualization software for intracranial localization. In hydrocephalus, however, the key subject to be studied is the profile of cerebral circulation around the ventricles of the brain. This suggests that, for displaying the cerebral ventricles in three dimensions, CT is a difficult technique whereas MRI is more useful. For this reason, we attempted to establish the profile of cerebral circulation around the cerebral ventricles by the production of combined 3D images of SPECT and MRI. In patients who had shunt surgery for hydrocephalus, a difference between pre- and postoperative cerebral circulation profiles was assessed by a voxel distribution curve, 3D SPECT images, and combined 3D SPECT and MRI images. As the shunt system in this study, an Orbis-Sigma valve of the automatic cerebrospinal fluid volume adjustment type was used in place of the variable pressure type Medos valve currently in use, because this device requires frequent changes in pressure and a change in pressure may be detected after MRI procedure. The SPECT apparatus used was PRISM3000 of the three-detector type, and 123I-IMP was used as the radionuclide in a dose of 222 MBq. MRI data were collected with an MAGNEXa+2 with a magnetic flux density of 0.5 tesla under the following conditions: field echo; TR 50 msec; TE, 10 msec; flip, 30ueK; 1 NEX; FOV, 23 cm; 1-mm slices; and gapless. 3D images are produced on the workstation TITAN

Dynamics of snap-off and pore-filling events during two-phase fluid flow in permeable media.

Science.gov (United States)

Singh, Kamaljit; Menke, Hannah; Andrew, Matthew; Lin, Qingyang; Rau, Christoph; Blunt, Martin J; Bijeljic, Branko

2017-07-12

Understanding the pore-scale dynamics of two-phase fluid flow in permeable media is important in many processes such as water infiltration in soils, oil recovery, and geo-sequestration of CO 2 . The two most important processes that compete during the displacement of a non-wetting fluid by a wetting fluid are pore-filling or piston-like displacement and snap-off; this latter process can lead to trapping of the non-wetting phase. We present a three-dimensional dynamic visualization study using fast synchrotron X-ray micro-tomography to provide new insights into these processes by conducting a time-resolved pore-by-pore analysis of the local curvature and capillary pressure. We show that the time-scales of interface movement and brine layer swelling leading to snap-off are several minutes, orders of magnitude slower than observed for Haines jumps in drainage. The local capillary pressure increases rapidly after snap-off as the trapped phase finds a position that is a new local energy minimum. However, the pressure change is less dramatic than that observed during drainage. We also show that the brine-oil interface jumps from pore-to-pore during imbibition at an approximately constant local capillary pressure, with an event size of the order of an average pore size, again much smaller than the large bursts seen during drainage.

Oviductal morphology in relation to hormonal levels in the snapping turtle, Chelydra serpentina.

Science.gov (United States)

Alkindi, A Y A; Mahmoud, I Y; Woller, M J; Plude, J L

2006-02-01

Microscopic and in situ visual observations were used to relate circulating hormone levels to morphological changes in the oviduct of the snapping turtle Chelydra serpentina throughout the ovarian cycle. Increase in levels of progesterone (P), estradiol (E2) and testosterone (T) levels coincide with an increase in number and growth of endometrial glands, luminal epithelial cells and secretory droplets throughout the oviduct. Testosterone and estradiol levels rose significantly (P < 0.05) after the May-June period and remained high throughout the rest of the summer. Progesterone levels remained stable throughout the summer, with a brief decline in July due to luteolysis. Hormonal values declined significantly (P < 0.001) at the end of the ovarian cycle in the fall. In situ visual observation of fresh oviducts at different stages of gravidity in recently ovulated turtles revealed that proteinaceous like components from the endometrial glands were released into the lumen to form fibers. The morphological features of the oviduct remained active throughout the summer months even though the snapping turtle is a monoclutch species which deposits all the eggs in late-May to mid-June. The high steroid levels correlate with and may be responsible for the secretory activity present throughout the summer and their decline correlates with change to low secretory activity in the fall. Calcium deposition accompanied by morphological changes in luminal cells are suggestive of secretory activity. In the egg-bearing turtles, uterine Ca2+ concentrations measured by flame atomic absorption spectrophotometry revealed significantly higher Ca2+ concentrations (P < 0.001) in eggs with soft shell than eggs without shell. There was a significant increase in calcium granules and proteinaceous fibers in luminal surface of the uterus during the period of eggshelling. This supports the fact that in the snapping turtle like in other reptiles, eggshelling process occurs in the uterus.

3D Printing and 3D Bioprinting in Pediatrics.

Science.gov (United States)

Vijayavenkataraman, Sanjairaj; Fuh, Jerry Y H; Lu, Wen Feng

2017-07-13

Additive manufacturing, commonly referred to as 3D printing, is a technology that builds three-dimensional structures and components layer by layer. Bioprinting is the use of 3D printing technology to fabricate tissue constructs for regenerative medicine from cell-laden bio-inks. 3D printing and bioprinting have huge potential in revolutionizing the field of tissue engineering and regenerative medicine. This paper reviews the application of 3D printing and bioprinting in the field of pediatrics.

3D Printing and 3D Bioprinting in Pediatrics

OpenAIRE

Vijayavenkataraman, Sanjairaj; Fuh, Jerry Y H; Lu, Wen Feng

2017-01-01

Additive manufacturing, commonly referred to as 3D printing, is a technology that builds three-dimensional structures and components layer by layer. Bioprinting is the use of 3D printing technology to fabricate tissue constructs for regenerative medicine from cell-laden bio-inks. 3D printing and bioprinting have huge potential in revolutionizing the field of tissue engineering and regenerative medicine. This paper reviews the application of 3D printing and bioprinting in the field of pediatrics.

A microfluidic device for 2D to 3D and 3D to 3D cell navigation

International Nuclear Information System (INIS)

Shamloo, Amir; Amirifar, Leyla

2016-01-01

Microfluidic devices have received wide attention and shown great potential in the field of tissue engineering and regenerative medicine. Investigating cell response to various stimulations is much more accurate and comprehensive with the aid of microfluidic devices. In this study, we introduced a microfluidic device by which the matrix density as a mechanical property and the concentration profile of a biochemical factor as a chemical property could be altered. Our microfluidic device has a cell tank and a cell culture chamber to mimic both 2D to 3D and 3D to 3D migration of three types of cells. Fluid shear stress is negligible on the cells and a stable concentration gradient can be obtained by diffusion. The device was designed by a numerical simulation so that the uniformity of the concentration gradients throughout the cell culture chamber was obtained. Adult neural cells were cultured within this device and they showed different branching and axonal navigation phenotypes within varying nerve growth factor (NGF) concentration profiles. Neural stem cells were also cultured within varying collagen matrix densities while exposed to NGF concentrations and they experienced 3D to 3D collective migration. By generating vascular endothelial growth factor concentration gradients, adult human dermal microvascular endothelial cells also migrated in a 2D to 3D manner and formed a stable lumen within a specific collagen matrix density. It was observed that a minimum absolute concentration and concentration gradient were required to stimulate migration of all types of the cells. This device has the advantage of changing multiple parameters simultaneously and is expected to have wide applicability in cell studies. (paper)

Clinical and cognitive trajectories in cognitively healthy elderly individuals with suspected non-Alzheimer's disease pathophysiology (SNAP) or Alzheimer's disease pathology: a longitudinal study.

Science.gov (United States)

Burnham, Samantha C; Bourgeat, Pierrick; Doré, Vincent; Savage, Greg; Brown, Belinda; Laws, Simon; Maruff, Paul; Salvado, Olivier; Ames, David; Martins, Ralph N; Masters, Colin L; Rowe, Christopher C; Villemagne, Victor L

2016-09-01

Brain amyloid β (Aβ) deposition and neurodegeneration have been documented in about 50-60% of cognitively healthy elderly individuals (aged 60 years or older). The long-term cognitive consequences of the presence of Alzheimer's disease pathology and neurodegeneration, and whether they have an independent or synergistic effect on cognition, are unclear. We aimed to characterise the long-term clinical and cognitive trajectories of healthy elderly individuals using a two-marker (Alzheimer's disease pathology and neurodegeneration) imaging construct. Between Nov 3, 2006, and Nov 25, 2014, 573 cognitively healthy individuals in Melbourne and Perth, Australia, (mean age 73·1 years [SD 6·2]; 58% women) were enrolled in the Australian Imaging, Biomarker and Lifestyle (AIBL) study. Alzheimer's disease pathology (A) was determined by measuring Aβ deposition by PET, and neurodegeneration (N) was established by measuring hippocampal volume using MRI. Individuals were categorised as A(-)N(-), A(+)N(-), A(+)N(+), or suspected non-Alzheimer's disease pathophysiology (A(-)N(+), SNAP). Clinical progression, hippocampal volume, standard neuropsychological tests, and domain-specific and global cognitive composite scores were assessed over 6 years of follow-up. Linear mixed effect models and a Cox proportional hazards model of survival were used to evaluate, compare, and contrast the clinical, cognitive, and volumetric trajectories of patients in the four AN categories. 50 (9%) healthy individuals were classified as A(+)N(+), 87 (15%) as A(+)N(-), 310 (54%) as A(-)N(-), and 126 (22%) as SNAP. APOE ε4 was more frequent in participants in the A(+)N(+) (27; 54%) and A(+)N(-) (42; 48%) groups than in the A(-)N(-) (66; 21%) and SNAP groups (23; 18%). The A(+)N(-) and A(+)N(+) groups had significantly faster cognitive decline than the A(-)N(-) group (0·08 SD per year for AIBL-Preclinical AD Cognitive Composite [PACC]; p<0·0001; and 0·25; p<0·0001; respectively). The A (+)N

Identifying mechanisms that structure ecological communities by snapping model parameters to empirically observed tradeoffs.

Science.gov (United States)

Thomas Clark, Adam; Lehman, Clarence; Tilman, David

2018-04-01

Theory predicts that interspecific tradeoffs are primary determinants of coexistence and community composition. Using information from empirically observed tradeoffs to augment the parametrisation of mechanism-based models should therefore improve model predictions, provided that tradeoffs and mechanisms are chosen correctly. We developed and tested such a model for 35 grassland plant species using monoculture measurements of three species characteristics related to nitrogen uptake and retention, which previous experiments indicate as important at our site. Matching classical theoretical expectations, these characteristics defined a distinct tradeoff surface, and models parameterised with these characteristics closely matched observations from experimental multi-species mixtures. Importantly, predictions improved significantly when we incorporated information from tradeoffs by 'snapping' characteristics to the nearest location on the tradeoff surface, suggesting that the tradeoffs and mechanisms we identify are important determinants of local community structure. This 'snapping' method could therefore constitute a broadly applicable test for identifying influential tradeoffs and mechanisms. © 2018 The Authors. Ecology Letters published by CNRS and John Wiley & Sons Ltd.

Improvement of the efficiency of two-dimensional multigroup transport calculations assuming isotropic reflection with multilevel spatial discretisation

International Nuclear Information System (INIS)

Stankovski, Z.; Zmijarevic, I.

1987-06-01

This paper presents two approximations used in multigroup two-dimensional transport calculations in large, very homogeneous media: isotropic reflection together with recently proposed group-dependent spatial representations. These approximations are implemented as standard options in APOLLO 2 assembly transport code. Presented example calculations show that significant savings in computational costs are obtained while preserving the overall accuracy

The Nodal Polynomial Expansion method to solve the multigroup diffusion equations

International Nuclear Information System (INIS)

Ribeiro, R.D.M.

1983-03-01

The methodology of the solutions of the multigroup diffusion equations and uses the Nodal Polynomial Expansion Method is covered. The EPON code was developed based upon the above mentioned method for stationary state, rectangular geometry, one-dimensional or two-dimensional and for one or two energy groups. Then, one can study some effects such as the influence of the baffle on the thermal flux by calculating the flux and power distribution in nuclear reactors. Furthermore, a comparative study with other programs which use Finite Difference (CITATION and PDQ5) and Finite Element (CHD and FEMB) Methods was undertaken. As a result, the coherence, feasibility, speed and accuracy of the methodology used were demonstrated. (Author) [pt

MINX: a multigroup interpretation of nuclear X-sections from ENDF/B

International Nuclear Information System (INIS)

Weisbin, C.R.; Soran, P.D.; MacFarlane, R.E.; Harris, D.R.; LaBauve, R.J.; Hendricks, J.S.; White, J.E.; Kidman, R.B.

1976-09-01

MINX calculates fine-group averaged infinitely dilute cross sections, self-shielding factors, and group-to-group transfer matrices from ENDF/B-IV data. Its primary purpose is to generate pseudo-composition independent multigroup libraries in the standard CCCC-III interface formats for use in the design and analysis of nuclear systems. MINX incorporates and improves upon the resonance capabilities of existing codes such as ETOX and ENDRUN and the high-Legendre-order transfer matrices of ETOG and SUPERTOG. Group structure, Legendre order, weight function, temperature, dilutions, and processing tolerances are all under user control. Paging and variable dimensioning allow very large problems to be run. Both CDC and IBM versions of MINX are available

The solution of the multigroup neutron transport equation using spherical harmonics

International Nuclear Information System (INIS)

Fletcher, K.

1981-01-01

A solution of the multi-group neutron transport equation in up to three space dimensions is presented. The flux is expanded in a series of unnormalised spherical harmonics. Using the various recurrence formulae a linked set of first order differential equations is obtained for the moments psisup(g)sub(lm)(r), γsup(g)sub(lm)(r). Terms with odd l are eliminated resulting in a second order system which is solved by two methods. The first is a finite difference formulation using an iterative procedure, secondly, in XYZ and XY geometry a finite element solution is given. Results for a test problem using both methods are exhibited and compared. (orig./RW) [de

3D game environments create professional 3D game worlds

CERN Document Server

Ahearn, Luke

2008-01-01

The ultimate resource to help you create triple-A quality art for a variety of game worlds; 3D Game Environments offers detailed tutorials on creating 3D models, applying 2D art to 3D models, and clear concise advice on issues of efficiency and optimization for a 3D game engine. Using Photoshop and 3ds Max as his primary tools, Luke Ahearn explains how to create realistic textures from photo source and uses a variety of techniques to portray dynamic and believable game worlds.From a modern city to a steamy jungle, learn about the planning and technological considerations for 3D modelin

Plasma and milk concentrations of vitamin D3 and 25-hydroxy vitamin D3 following intravenous injection of vitamin D3 or 25-hydroxy vitamin D3.

OpenAIRE

Hidiroglou, M; Knipfel, J E

1984-01-01

Plasma levels of vitamin D3 or 25-hydroxyvitamin D3 in ewes after administration of a single massive intravenous dose of vitamin D3 (2 X 10(6) IU) or 25-hydroxy vitamin D3 (5 mg) were determined at zero, one, two, three, five, ten and 20 days postinjection. In six ewes injected with vitamin D3 conversion of vitamin D3 to 25-hydroxy vitamin D3 resulted in a six-fold increase in the plasma 25-hydroxy vitamin D3 level within one day. Elevated levels were maintained until day 10 but by day 20 a s...

3-D Whole-Core Transport Calculation with 3D/2D Rotational Plane Slicing Method

Energy Technology Data Exchange (ETDEWEB)

Yoo, Han Jong; Cho, Nam Zin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2014-10-15

Use of the method of characteristics (MOC) is very popular due to its capability of heterogeneous geometry treatment and widely used for 2-D core calculation, but direct extension of MOC to 3-D core is not so attractive due to huge calculational cost. 2-D/1-D fusion method was very successful for 3-D calculation of current generation reactor types (highly heterogeneous in radial direction but piece-wise homogeneous in axial direction). In this paper, 2-D MOC concept is extended to 3-D core calculation with little modification of an existing 2-D MOC code. The key idea is to suppose 3-D geometry as a set of many 2-D planes like a phone-directory book. Dividing 3-D structure into a large number of 2-D planes and solving each plane with a simple 2-D SN transport method would give the solution of a 3-D structure. This method was developed independently at KAIST but it is found that this concept is similar with that of 'plane tracing' in the MCCG-3D code. The method developed was tested on the 3-D C5G7 OECD/NEA benchmark problem and compared with the 2-D/1-D fusion method. Results show that the proposed method is worth investigating further. A new approach to 3-D whole-core transport calculation is described and tested. By slicing 3-D structure along characteristic planes and solving each 2-D plane problem, we can get 3-D solution. The numerical test results indicate that the new method is comparable with the 2D/1D fusion method and outperforms other existing methods. But more fair comparison should be done in similar discretization level.

A 3D coarse-mesh time dependent code for nuclear reactor kinetic calculations

International Nuclear Information System (INIS)

Montagnini, B.; Raffaelli, P.; Sumini, M.; Zardini, D.M.

1996-01-01

A course-mesh code for time-dependent multigroup neutron diffusion calculation based on a direct integration scheme for the time dependence and a low order nodal flux expansion approximation for the space variables has been implemented as a fast tool for transient analysis. (Author)

From 2D to 3D turbulence through 2D3C configurations

Science.gov (United States)

Buzzicotti, Michele; Biferale, Luca; Linkmann, Moritz

2017-11-01

We study analytically and numerically the geometry of the nonlinear interactions and the resulting energy transfer directions of 2D3C flows. Through a set of suitably designed Direct Numerical Simulations we also study the coupling between several 2D3C flows, where we explore the transition between 2D and fully 3D turbulence. In particular, we find that the coupling of three 2D3C flows on mutually orthogonal planes subject to small-scale forcing leads to a stationary 3D out-of-equilibrium dynamics at the energy containing scales where the inverse cascade is directly balanced by a forward cascade carried by a different subsets of interactions. ERC AdG Grant No 339032 NewTURB.

3D Space Shift from CityGML LoD3-Based Multiple Building Elements to a 3D Volumetric Object

Directory of Open Access Journals (Sweden)

Shen Ying

2017-01-01

Full Text Available In contrast with photorealistic visualizations, urban landscape applications, and building information system (BIM, 3D volumetric presentations highlight specific calculations and applications of 3D building elements for 3D city planning and 3D cadastres. Knowing the precise volumetric quantities and the 3D boundary locations of 3D building spaces is a vital index which must remain constant during data processing because the values are related to space occupation, tenure, taxes, and valuation. To meet these requirements, this paper presents a five-step algorithm for performing a 3D building space shift. This algorithm is used to convert multiple building elements into a single 3D volumetric building object while maintaining the precise volume of the 3D space and without changing the 3D locations or displacing the building boundaries. As examples, this study used input data and building elements based on City Geography Markup Language (CityGML LoD3 models. This paper presents a method for 3D urban space and 3D property management with the goal of constructing a 3D volumetric object for an integral building using CityGML objects, by fusing the geometries of various building elements. The resulting objects possess true 3D geometry that can be represented by solid geometry and saved to a CityGML file for effective use in 3D urban planning and 3D cadastres.

MVP/GMVP II, MC Codes for Neutron and Photon Transport Calc. based on Continuous Energy and Multigroup Methods

International Nuclear Information System (INIS)

2005-01-01

A - Description of program or function: (1) Problems to be solved: MVP/GMVP can solve eigenvalue and fixed-source problems. The multigroup code GMVP can solve forward and adjoint problems for neutron, photon and neutron-photon coupled transport. The continuous-energy code MVP can solve only the forward problems. Both codes can also perform time-dependent calculations. (2) Geometry description: MVP/GMVP employs combinatorial geometry to describe the calculation geometry. It describes spatial regions by the combination of the 3-dimensional objects (BODIes). Currently, the following objects (BODIes) can be used. - BODIes with linear surfaces: half space, parallelepiped, right parallelepiped, wedge, right hexagonal prism; - BODIes with quadratic surface and linear surfaces: cylinder, sphere, truncated right cone, truncated elliptic cone, ellipsoid by rotation, general ellipsoid; - Arbitrary quadratic surface and torus. The rectangular and hexagonal lattice geometry can be used to describe the repeated geometry. Furthermore, the statistical geometry model is available to treat coated fuel particles or pebbles for high temperature reactors. (3) Particle sources: The various forms of energy-, angle-, space- and time-dependent distribution functions can be specified. (4) Cross sections: The ANISN-type PL cross sections or the double-differential cross sections can be used in the multigroup code GMVP. On the other hand, the specific cross section libraries are used in the continuous-energy code MVP. The libraries are generated from the evaluated nuclear data (JENDL-3.3, ENDF/B-VI, JEF-3.0 etc.) by using the LICEM code. The neutron cross sections in the unresolved resonance region are described by the probability table method. The neutron cross sections at arbitrary temperatures are available for MVP by just specifying the temperatures in the input data. (5) Boundary conditions: Vacuum, perfect reflective, isotropic reflective (white), periodic boundary conditions can be

Effect of 24,25-dihydroxyvitamin D3 on 1,25-dihydroxyvitamin D3 [1,25-(OH)2D3] metabolism in vitamin D-deficient rats infused with 1,25-(OH)2D3

International Nuclear Information System (INIS)

Yamato, H.; Matsumoto, T.; Fukumoto, S.; Ikeda, K.; Ishizuka, S.; Ogata, E.

1989-01-01

Previous studies revealed that administration of 24,25-dihydroxyvitamin D3 [24,25-(OH)2D3] to calcium (Ca)-deficient rats causes a dose-dependent reduction in markedly elevated serum 1,25-(OH)2D3 level. Although the results suggested that the metabolism of 1,25-(OH)2D3 was accelerated by 24,25-(OH)2D3, those experiments could not define whether the enhanced metabolism of 1,25-(OH)2D3 played a role in the reduction in the serum 1,25-(OH)2D3 level. In the present study, in order to address this issue more specifically, serum 1,25-(OH)2D3 was maintained solely by exogenous administration through miniosmotic pumps of 1,25-(OH)2D3 into vitamin D-deficient rats. Thus, by measuring the serum 1,25-(OH)2D3 concentration, the effect of 24,25-(OH)2D3 on the MCR of 1,25-(OH)2D3 could be examined. Administration of 24,25-(OH)2D3 caused a dose-dependent enhancement in the MCR of 1,25-(OH)2D3, and 1 microgram/100 g rat.day 24,25-(OH)2D3, which elevated serum 24,25-(OH)2D3 to 8.6 +/- 1.3 ng/ml, significantly increased MCR and suppressed serum levels of 1,25-(OH)2D3. The effect of 24,25-(OH)2D3 on 1,25-(OH)2D3 metabolism developed with a rapid time course, and the recovery of iv injected [1 beta-3H]1,25-(OH)2D3 in blood was significantly reduced within 1 h. In addition, there was an increase in radioactivity in the water-soluble fraction of serum as well as in urine, suggesting that 1,25-(OH)2D3 is rapidly degraded to a water-soluble metabolite(s). Furthermore, the reduction in serum 1,25-(OH)2D3 was associated with a reduction in both serum and urinary Ca levels. Because the conversion of [3H]24,25-(OH)2D3 to [3H]1,24,25-(OH)2D3 or other metabolites was minimal in these rats, 24,25-(OH)2D3 appears to act without being converted into other metabolites. These results demonstrate that 24,25-(OH)2D3 rapidly stimulates the metabolism of 1,25-(OH)2D3 and reduces its serum level

76 FR 35787 - Updated Trafficking Definition and Supplemental Nutrition Assistance Program (SNAP)-FDPIR Dual...

Science.gov (United States)

2011-06-20

...-Rulemaking Portal: Go to http://www.regulations.gov . Preferred method; follow the online instructions for... included in the record and will be made available to the public. Please be advised that the substance of... definition of trafficking in SNAP benefits is as follows: ``Trafficking means the buying or selling of...

Exploring the association of urban or rural county status and environmental, nutrition- and lifestyle-related resources with the efficacy of SNAP-Ed (Supplemental Nutrition Assistance Program-Education) to improve food security.

Science.gov (United States)

Rivera, Rebecca L; Dunne, Jennifer; Maulding, Melissa K; Wang, Qi; Savaiano, Dennis A; Nickols-Richardson, Sharon M; Eicher-Miller, Heather A

2018-04-01

To investigate the association of policy, systems and environmental factors with improvement in household food security among low-income Indiana households with children after a Supplemental Nutrition Assistance Program-Education (SNAP-Ed) direct nutrition education intervention. Household food security scores measured by the eighteen-item US Household Food Security Survey Module in a longitudinal randomized and controlled SNAP-Ed intervention study conducted from August 2013 to April 2015 were the response variable. Metrics to quantify environmental factors including classification of urban or rural county status; the number of SNAP-authorized stores, food pantries and recreational facilities; average fair market housing rental price; and natural amenity rank were collected from government websites and data sets covering the years 2012-2016 and used as covariates in mixed multiple linear regression modelling. Thirty-seven Indiana counties, USA, 2012-2016. SNAP-Ed eligible adults from households with children (n 328). None of the environmental factors investigated were significantly associated with changes in household food security in this exploratory study. SNAP-Ed improves food security regardless of urban or rural location or the environmental factors investigated. Expansion of SNAP-Ed in rural areas may support food access among the low-income population and reduce the prevalence of food insecurity in rural compared with urban areas. Further investigation into policy, systems and environmental factors of the Social Ecological Model are warranted to better understand their relationship with direct SNAP-Ed and their impact on diet-related behaviours and food security.

Preparation of multigroup lumped fission product cross-sections from ENDF/B-VI for FBRs

International Nuclear Information System (INIS)

Devan, K.; Gopalakrishnan, V.; Mohanakrishnan, P.; Sridharan, M.S.

1997-01-01

Multigroup pseudo fission product cross-sections were computed from the American evaluated nuclear data library ENDF/B-VI, corresponding to various burnups of the proposed 500 MWe prototype fast breeder reactor (PFBR), in India. The data were derived from the cross-sections of 111 selected fission products that account for almost complete capture of fission products in an FBR. The dependence of burnup on the pseudo fission product cross-sections, and comparison with other data sets, viz. JNDC, ENDF/B-IV and ABBN, are discussed. (author)

RAG-3D: a search tool for RNA 3D substructures

Science.gov (United States)

Zahran, Mai; Sevim Bayrak, Cigdem; Elmetwaly, Shereef; Schlick, Tamar

2015-01-01

To address many challenges in RNA structure/function prediction, the characterization of RNA's modular architectural units is required. Using the RNA-As-Graphs (RAG) database, we have previously explored the existence of secondary structure (2D) submotifs within larger RNA structures. Here we present RAG-3D—a dataset of RNA tertiary (3D) structures and substructures plus a web-based search tool—designed to exploit graph representations of RNAs for the goal of searching for similar 3D structural fragments. The objects in RAG-3D consist of 3D structures translated into 3D graphs, cataloged based on the connectivity between their secondary structure elements. Each graph is additionally described in terms of its subgraph building blocks. The RAG-3D search tool then compares a query RNA 3D structure to those in the database to obtain structurally similar structures and substructures. This comparison reveals conserved 3D RNA features and thus may suggest functional connections. Though RNA search programs based on similarity in sequence, 2D, and/or 3D structural elements are available, our graph-based search tool may be advantageous for illuminating similarities that are not obvious; using motifs rather than sequence space also reduces search times considerably. Ultimately, such substructuring could be useful for RNA 3D structure prediction, structure/function inference and inverse folding. PMID:26304547

Determination of the 3d34d and 3d35s configurations of Fe V

International Nuclear Information System (INIS)

Azarov, V.I.

2001-01-01

The analysis of the spectrum of four times ionized iron, Fe V, has led to the determination of the 3d 3 4d and 3d 3 5s configurations. From 975 classified lines in the region 645-1190 A we have established 123 of 168 theoretically possible 3d 3 4d levels and 26 of 38 possible 3d 3 5s levels. The estimated accuracy of values of energy levels of these two configurations is about 0.7 cm -1 and 1.0 cm -1 , respectively. The level structure of the system of the 3d 4 , 3d 3 4s, 3d 3 4d and 3d 3 5s configurations has been theoretically interpreted and the energy parameters have been determined by a least squares fit to the observed levels. A comparison of parameters in Cr III and Fe V ions is given. (orig.)

Surgical Treatment of Snapping Scapula Syndrome Due to Malunion of Rib Fractures.

Science.gov (United States)

Ten Duis, Kaj; IJpma, Frank F A

2017-02-01

This report describes a case of snapping scapula syndrome (SSS) caused by malunited rib fractures. Abrasion of the deformed ribs was performed with good results. SSS as a cause of shoulder pain after thoracic trauma has to be considered and can be treated by a surgical abrasion technique. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Axionic D3-D7 Inflation

CERN Document Server

Burgess, C P; Postma, M

2009-01-01

We study the motion of a D3 brane moving within a Type IIB string vacuum compactified to 4D on K3 x T_2/Z_2 in the presence of D7 and O7 planes. We work within the effective 4D supergravity describing how the mobile D3 interacts with the lightest bulk moduli of the compactification, including the effects of modulus-stabilizing fluxes. We seek inflationary solutions to the resulting equations, performing our search numerically in order to avoid resorting to approximate parameterizations of the low-energy potential. We consider uplifting from D-terms and from the supersymmetry-breaking effects of anti-D3 branes. We find examples of slow-roll inflation (with anti-brane uplifting) with the mobile D3 moving along the toroidal directions, falling towards a D7-O7 stack starting from the antipodal point. The inflaton turns out to be a linear combination of the brane position and the axionic partner of the K3 volume modulus, and the similarity of the potential along the inflaton direction with that of racetrack inflat...

Subacute casemix classification for stroke rehabilitation in Australia. How well does AN-SNAP v2 explain variance in outcomes?