Comparison of H.323 and SIP for IP telephony signaling

Science.gov (United States)

Dalgic, Ismail; Fang, Hanlin

1999-11-01

Two standards currently compete for the dominance of IP telephony signaling: the H.323 protocol suite by ITU-T, and the Session Initiation Protocol (SIP) by IETF. Both of these signaling protocols provide mechanisms for call establishment and teardown, call control and supplementary services, and capability exchange. We investigate and compare these two protocols in terms of Functionality, Quality of Service (QoS), Scalability, Flexibility, Interoperability, and Ease of Implementation. For fairness of comparison, we consider similar scenarios for both protocols. In particular, we focus on scenarios that involve a gatekeeper for H.323, and a Proxy/Redirect server for SIP. The reason is that medium-to-large IP Telephony systems are not manageable without a gatekeeper or proxy server. We consider all three versions of H.323. In terms of functionality and services that can be supported, H.323 version 2 and SIP are very similar. However, supplementary services in H.323 are more rigorously defined, and therefore fewer interoperability issues are expected among its implementations. Furthermore, H.323 has taken more steps to ensure compatibility among its different versions, and to interoperate with PSTN. The two protocols are comparable in their QoS support [similar call setup delays, no support for resource reservation or class of service (CoS) setting], but H.323 version 3 will allow signaling of the requested CoS. SIP's primary advantages are (1) flexibility to add new features, and (2) relative ease of implementation and debugging. Finally, we note that H.323 and SIP are improving themselves by learning from each other, and the differences between them are diminishing with each new version.

Approach to stress tests in SIP environment based on marginal analysis

OpenAIRE

Voznak, Miroslav; Rozhon, Jan

2013-01-01

In the field of performance metrics and measurements of SIP (Session Initiation Protocol) Proxy and B2BUA (Back-to-Back User Agent) no standardized methodology has been presented yet. This gap results in a problematic determination of a hardware, the performance of which would be cost-effective and sufficient for the running the SIP Server in a given environment. Today practice relies on the administrator’s skills and experience with the needs of the telephony infrastructure. From this and th...

A Secured Authentication Protocol for SIP Using Elliptic Curves Cryptography

Science.gov (United States)

Chen, Tien-Ho; Yeh, Hsiu-Lien; Liu, Pin-Chuan; Hsiang, Han-Chen; Shih, Wei-Kuan

Session initiation protocol (SIP) is a technology regularly performed in Internet Telephony, and Hyper Text Transport Protocol (HTTP) as digest authentication is one of the major methods for SIP authentication mechanism. In 2005, Yang et al. pointed out that HTTP could not resist server spoofing attack and off-line guessing attack and proposed a secret authentication with Diffie-Hellman concept. In 2009, Tsai proposed a nonce based authentication protocol for SIP. In this paper, we demonstrate that their protocol could not resist the password guessing attack and insider attack. Furthermore, we propose an ECC-based authentication mechanism to solve their issues and present security analysis of our protocol to show that ours is suitable for applications with higher security requirement.

Server virtualization solutions

OpenAIRE

Jonasts, Gusts

2012-01-01

Currently in the information technology sector that is responsible for a server infrastructure is a huge development in the field of server virtualization on x86 computer architecture. As a prerequisite for such a virtualization development is growth in server productivity and underutilization of available computing power. Several companies in the market are working on two virtualization architectures – hypervizor and hosting. In this paper several of virtualization products that use host...

A lightweight privacy preserving authenticated key agreement protocol for SIP-based VoIP

OpenAIRE

Zhang, Liping; Tang, Shanyu; Zhu, Shaohui

2016-01-01

Session Initiation Protocol (SIP) is an essential part of most Voice over Internet Protocol (VoIP) architecture. Although SIP provides attractive features, it is exposed to various security threats, and so an efficient and secure authentication scheme is sought to enhance the security of SIP. Several attempts have been made to address the tradeoff problem between security and efficiency, but designing a successful authenticated key agreement protocol for SIP is still a challenging task from t...

Integrating Usage Control with SIP-Based Communications

Directory of Open Access Journals (Sweden)

A. Lakas

2008-11-01

Full Text Available The Session Initiation Protocol (SIP is a signaling protocol used for establishing and maintaining communication sessions involving two or more participants. SIP was initially designed for voice over IP and multimedia conferencing, and then was extended to support other services such as instant messaging and presence management. Today, SIP is also adopted to be used with 3G wireless networks, thus it becomes an integral protocol for ubiquitous environment. SIP has various methods that support a variety of applications such as subscribing to a service, notification of an event, status update, and location and presence services. However, when it comes to security, the use of wireless and mobile communication technologies and the pervasive nature of this environment introduce higher risks to security than that of the old simple environment. In this paper, we introduce new architecture that implements a new type of access control called usage access control (UCON to control the access to the SIP-based communication at preconnection, during connection, and postconnection. This will enable prescribers of SIP services to control who can identify their locations to approve or disapprove their subsequent connections, and to also set some parameters to determine whether a certain communication can continue or should terminate.

Open client/server computing and middleware

CERN Document Server

Simon, Alan R

2014-01-01

Open Client/Server Computing and Middleware provides a tutorial-oriented overview of open client/server development environments and how client/server computing is being done.This book analyzes an in-depth set of case studies about two different open client/server development environments-Microsoft Windows and UNIX, describing the architectures, various product components, and how these environments interrelate. Topics include the open systems and client/server computing, next-generation client/server architectures, principles of middleware, and overview of ProtoGen+. The ViewPaint environment

A performance analysis of advanced I/O architectures for PC-based network file servers

Science.gov (United States)

Huynh, K. D.; Khoshgoftaar, T. M.

1994-12-01

In the personal computing and workstation environments, more and more I/O adapters are becoming complete functional subsystems that are intelligent enough to handle I/O operations on their own without much intervention from the host processor. The IBM Subsystem Control Block (SCB) architecture has been defined to enhance the potential of these intelligent adapters by defining services and conventions that deliver command information and data to and from the adapters. In recent years, a new storage architecture, the Redundant Array of Independent Disks (RAID), has been quickly gaining acceptance in the world of computing. In this paper, we would like to discuss critical system design issues that are important to the performance of a network file server. We then present a performance analysis of the SCB architecture and disk array technology in typical network file server environments based on personal computers (PCs). One of the key issues investigated in this paper is whether a disk array can outperform a group of disks (of same type, same data capacity, and same cost) operating independently, not in parallel as in a disk array.

Location Privacy Techniques in Client-Server Architectures

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard; Lu, Hua; Yiu, Man Lung

2009-01-01

A typical location-based service returns nearby points of interest in response to a user location. As such services are becoming increasingly available and popular, location privacy emerges as an important issue. In a system that does not offer location privacy, users must disclose their exact...... locations in order to receive the desired services. We view location privacy as an enabling technology that may lead to increased use of location-based services. In this chapter, we consider location privacy techniques that work in traditional client-server architectures without any trusted components other....... Third, their effectiveness is independent of the distribution of other users, unlike the k-anonymity approach. The chapter characterizes the privacy models assumed by existing techniques and categorizes these according to their approach. The techniques are then covered in turn according...

The architecture of a virtual grid GIS server

Science.gov (United States)

Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

2008-10-01

The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

Weaknesses of a dynamic identity based authentication protocol for multi-server architecture

OpenAIRE

Han, Weiwei

2012-01-01

Recently, Li et al. proposed a dynamic identity based authentication protocol for multi-server architecture. They claimed their protocol is secure and can withstand various attacks. But we found some security loopholes in the protocol. Accordingly, the current paper demonstrates that Li et al.'s protocol is vulnerable to the replay attack, the password guessing attack and the masquerade attack.

A PROPOSED MAPPING ARCHITECTURE BETWEEN IAX AND JINGLE PROTOCOLS

Directory of Open Access Journals (Sweden)

Hadeel Saleh Haj Aliwi

2016-03-01

Full Text Available Nowadays, multimedia communication has improved rapidly to allow people to communicate via the Internet. However, Internet users cannot communicate with each other unless they use the same chatting applications since each chatting application uses a certain signaling protocol to make the media call. The mapping architecture is a very critical issue since it solves the communication problems between any two protocols, as well as it enables people around the world to make a voice/video call even if they use different chatting applications. Providing the interoperability between different signaling protocols and multimedia applications takes the advantages of more than one protocol. Many mapping architectures have been proposed to ease exchanging the media between at least two users without facing any difficulties such as SIP-Jingle, IAX-RSW, H.323-MGCP, etc. However, the design of any of the existing mapping architectures has some weaknesses related to larger delay, time consuming, and security matters. The only way to overcome these problems is to propose an efficient mapping architecture. This paper proposed a new mapping architecture between Inter-Asterisk eXchange Protocol and Jingle Protocol. The proposed mapping architecture consists of IAX domain (IAX client, IAX server, IAX-to-Jingle gateway, and Jingle domain (Jingle client, Jingle server, Jingle-to-IAX gateway. The tasks of the translation gateways are represented by the URI conversion, media capability exchange, translator of call setup and teardown signals, and real time media transmission.

The SHIP: A SIP to HTTP Interaction Protocol

Science.gov (United States)

Zeiß, Joachim; Gabner, Rene; Bessler, Sandford; Happenhofer, Marco

IMS is capable of providing a wide range of services. As a result, terminal software becomes more and more complex to deliver network intelligence to user applications. Currently mobile terminal software needs to be permanently updated so that the latest network services and functionality can be delivered to the user. In the Internet, browser based user interfaces assure that an interface is made available to the user which offers the latest services in the net immediately. Our approach combines the benefits of the Session Initiation Protocol (SIP) and those of the HTTP protocol to bring the same type of user interfacing to IMS. SIP (IMS) realizes authentication, session management, charging and Quality of Service (QoS), HTTP provides access to Internet services and allows the user interface of an application to run on a mobile terminal while processing and orchestration is done on the server. A SHIP enabled IMS client only needs to handle data transport and session management via SIP, HTTP and RTP and render streaming media, HTML and Javascript. SHIP allows new kinds of applications, which combine audio, video and data within a single multimedia session.

Design of a SIP device cooperation system on OSGi service platforms

Science.gov (United States)

Takayama, Youji; Koita, Takahiro; Sato, Kenya

2007-12-01

Home networks feature such various technologies as protocols, specifications, and middleware, including HTTP, UPnP, and Jini. A service platform is required to handle such technologies to enable them to cooperate with different devices. The OSGi service platform, which meets the requirements based on service-oriented architecture, is designed and standardized by OSGi Alliance and consists of two parts: one OSGi Framework and bundles. On the OSGi service platform, APIs are defined as services that can handle these technologies and are implemented in the bundle. By using the OSGi Framework with bundles, various technologies can cooperate with each other. On the other hand, in IP networks, Session Initiation Protocol (SIP) is often used in device cooperation services to resolve an IP address, control a session between two or more devices, and easily exchange the statuses of devices. However, since many existing devices do not correspond to SIP, it cannot be used for device cooperation services. A device that does not correspond to SIP is called an unSIP device. This paper proposes and implements a prototype system that enables unSIP devices to correspond to SIP. For unSIP devices, the proposed system provides device cooperation services with SIP.

Tree-based server-middleman-client architecture: improving scalability and reliability for voting-based network games in ad hoc wireless networks

Science.gov (United States)

Guo, Y.; Fujinoki, H.

2006-10-01

The concept of a new tree-based architecture for networked multi-player games was proposed by Matuszek to improve scalability in network traffic at the same time to improve reliability. The architecture (we refer it as "Tree-Based Server- Middlemen-Client architecture") will solve the two major problems in ad-hoc wireless networks: frequent link failures and significance in battery power consumption at wireless transceivers by using two new techniques, recursive aggregation of client messages and subscription-based propagation of game state. However, the performance of the TBSMC architecture has never been quantitatively studied. In this paper, the TB-SMC architecture is compared with the client-server architecture using simulation experiments. We developed an event driven simulator to evaluate the performance of the TB-SMC architecture. In the network traffic scalability experiments, the TB-SMC architecture resulted in less than 1/14 of the network traffic load for 200 end users. In the reliability experiments, the TB-SMC architecture improved the number of successfully delivered players' votes by 31.6, 19.0, and 12.4% from the clientserver architecture at high (failure probability of 90%), moderate (50%) and low (10%) failure probability.

The Water SWITCH-ON Spatial Information Platform (SIP)

Science.gov (United States)

Sala Calero, J., Sr.; Boot, G., Sr.; Dihé, P., Sr.; Arheimer, B.

2017-12-01

The amount of hydrological open data is continually growing and providing opportunities to the scientific community. Although the existing data portals (GEOSS Portal, INSPIRE community geoportal and others) enable access to open data, many users still find browsing through them difficult. Moreover, the time spent on gathering and preparing data usually is more significant than the time spent on the experiment itself. Thus, any improvement on searching, understanding, accessing or using open data is greatly beneficial. The Spatial Information Platform (SIP) has been developed to tackle these issues within the SWITCH-ON European Commission funded FP7 project. The SIP has been designed as a set of tools based on open standards that provide to the user all the necessary functionalities as described in the Publish-Find-Bind (PFB) pattern. In other words, this means that the SIP helps users to locate relevant and suitable data for their experiments analysis, to access and transform it (filtering, extraction, selection, conversion, aggregation). Moreover, the SIP can be used to provide descriptive information about the data and to publish it so others can find and use it. The SIP is based on existing open data protocols such as the OGC/CSW, OGC/WMS, OpenDAP and open-source components like PostgreSQL/PostGIS, GeoServer and pyCSW. The SIP is divided in three main user interfaces: the BYOD (Browse your open dataset) web interface, the Expert GUI tool and the Upload Data and Metadata web interface. The BYOD HTML5 client is the main entry point for users that want to browse through open data in the SIP. The BYOD has a map interface based on Leaflet JavaScript libraries so that the users can search more efficiently. The web-based Open Data Registration Tool is a user-friendly upload and metadata description interface (geographical extent, license, DOI generation). The Expert GUI is a desktop application that provides full metadata editing capabilities for the metadata

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography.

Science.gov (United States)

Reddy, Alavalapati Goutham; Das, Ashok Kumar; Odelu, Vanga; Yoo, Kee-Young

2016-01-01

Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.'s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN) logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

Peer-to-peer session initiation protocol in highly volatile environments

NARCIS (Netherlands)

Oredope, A.; Liotta, A.; Roper, I.; Morphett, J.

2008-01-01

The session initiation protocol (SIP) is an IETF standardised protocol for multimedia signalling and communication over the internet. SIP has been used in many deployments in client-server architecture. However, this configuration potentially possesses various scalability and redundancy limitations

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography

Science.gov (United States)

Reddy, Alavalapati Goutham; Das, Ashok Kumar; Odelu, Vanga; Yoo, Kee-Young

2016-01-01

Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.’s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN) logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.’s protocol and existing similar protocols. PMID:27163786

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography.

Directory of Open Access Journals (Sweden)

Alavalapati Goutham Reddy

Full Text Available Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.'s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

Client-server computer architecture saves costs and eliminates bottlenecks

International Nuclear Information System (INIS)

Darukhanavala, P.P.; Davidson, M.C.; Tyler, T.N.; Blaskovich, F.T.; Smith, C.

1992-01-01

This paper reports that workstation, client-server architecture saved costs and eliminated bottlenecks that BP Exploration (Alaska) Inc. experienced with mainframe computer systems. In 1991, BP embarked on an ambitious project to change technical computing for its Prudhoe Bay, Endicott, and Kuparuk operations on Alaska's North Slope. This project promised substantial rewards, but also involved considerable risk. The project plan called for reservoir simulations (which historically had run on a Cray Research Inc. X-MP supercomputer in the company's Houston data center) to be run on small computer workstations. Additionally, large Prudhoe Bay, Endicott, and Kuparuk production and reservoir engineering data bases and related applications also would be moved to workstations, replacing a Digital Equipment Corp. VAX cluster in Anchorage

Stress-induced premature senescence (SIPS)--influence of SIPS on radiotherapy.

Science.gov (United States)

Suzuki, Masatoshi; Boothman, David A

2008-03-01

Replicative senescence is a fundamental feature in normal human diploid cells and results from dysfunctional telomeres at the Hayflick cell division limit. Ionizing radiation (IR) prematurely induces the same phenotypes as replicative senescence prior to the Hayflick limit. This process is known as stress-induced premature senescence (SIPS). Since the cell cycle is irreversibly arrested in SIPS-induced cells, even if they are stimulated by various growth factors, it is thought that SIPS is a form of cell death, irreversibly eliminating replicating cells. IR-induced-focus formation of DNA repair proteins, a marker of DNA damage, is detected in SIPS as well as replicative senescent cells. Furthermore, both processes persistently induce cell cycle checkpoint mechanisms, indicating DNA damage created by ionizing radiation induces SIPS in normal cells, possibly by the same mechanisms as those occurring in replicative senescence. Interestingly, IR induces SIPS not only in normal cells, but also in tumor cells. Due to the expression of telomerase in tumor cells, telomere-dependent replicative senescence does not occur. However, SIPS is induced under certain conditions after IR exposure. Thus, cell death triggered by IR can be attributed to apoptosis or SIPS in tumor cells. However, metabolic function remains intact in SIPS-induced cancer cells, and recent studies show that senescence eliminate cells undergoing SIPS secrete various kinds of factors outside the cell, changing the microenvironment. Evidence using co-culture systems containing normal senescent stromal cells and epithelial tumor cells show that factors secreted from senescent stroma cells promote the growth of tumor epithelial cells both in vitro and in vivo. Thus, regulation of factors secreted from SIPS-induced stromal cells, as well as tumor cells, may affect radiotherapy.

Stress-induced premature senescence (SIPS). Influence of SIPS on radiotherapy

International Nuclear Information System (INIS)

Suzuki, Masatoshi; Boothman, D.A.

2008-01-01

Replicative senescence is a fundamental feature in normal human diploid cells and results from dysfunctional telomeres at the Hayflick cell division limit. Ionizing radiation (IR) prematurely induces the same phenotypes as replicative senescence prior to the Hayflick limit. This process is known as stress-induced premature senescence (SIPS). Since the cell cycle is irreversibly arrested in SIPS-induced cells, even if they are stimulated by various growth factors, it is thought that SIPS is a form of cell death, irreversibly eliminating replicating cells. IR-induced-focus formation of DNA repair proteins, a marker of DNA damage, is detected in SIPS as well as replicative senescent cells. Furthermore, both processes persistently induce cell cycle checkpoint mechanisms, indicating DNA damage created by ionizing radiation induces SIPS in normal cells, possibly by the same mechanisms as those occurring in replicative senescence. Interestingly, IR induces SIPS not only in normal cells, but also in tumor cells. Due to the expression of telomerase in tumor cells, telomere-dependent replicative senescence does not occur. However, SIPS is induced under certain conditions after IR exposure. Thus, cell death triggered by IR can be attributed to apoptosis or SIPS in tumor cells. However, metabolic function remains intact in SIPS-induced cancer cells, and recent studies show that senescence eliminate cells undergoing SIPS secrete various kinds of factors outside the cell, changing the microenvironment. Evidence using co-culture systems containing normal senescent stromal cells and epithelial tumor cells show that factors secreted from senescent stroma cells promote the growth of tumor epithelial cells both in vitro and in vivo. Thus, regulation of factors secreted from SIPS-induced stromal cells, as well as tumor cells, may affect radiotherapy. (author)

Decentralized session initiation protocol solution in ad hoc networks

Science.gov (United States)

Han, Lu; Jin, Zhigang; Shu, Yantai; Dong, Linfang

2006-10-01

With the fast development of ad hoc networks, SIP has attracted more and more attention in multimedia service. This paper proposes a new architecture to provide SIP service for ad hoc users, although there is no centralized SIP server deployed. In this solution, we provide the SIP service by the introduction of two nodes: Designated SIP Server (DS) and its Backup Server (BDS). The nodes of ad hoc network designate DS and BDS when they join the session nodes set and when some pre-defined events occur. A new sip message type called REGISTRAR is presented so nodes can send others REGISTRAR message to declare they want to be DS. According to the IP information taken in the message, an algorithm works like the election of DR and BDR in OSPF protocol is used to vote DS and BDS SIP servers. Naturally, the DS will be replaced by BDS when the DS is down for predicable or unpredictable reasons. To facilitate this, the DS should register to the BDS and transfer a backup of the SIP users' database. Considering the possibility DS or BDS may abruptly go down, a special policy is given. When there is no DS and BDS, a new election procedure is triggered just like the startup phase. The paper also describes how SIP works normally in the decentralized model as well as the evaluation of its performance. All sessions based on SIP in ad hoc such as DS voting have been tested in the real experiments within a 500m*500m square area where about 30 random nodes are placed.

Effect of video server topology on contingency capacity requirements

Science.gov (United States)

Kienzle, Martin G.; Dan, Asit; Sitaram, Dinkar; Tetzlaff, William H.

1996-03-01

Video servers need to assign a fixed set of resources to each video stream in order to guarantee on-time delivery of the video data. If a server has insufficient resources to guarantee the delivery, it must reject the stream request rather than slowing down all existing streams. Large scale video servers are being built as clusters of smaller components, so as to be economical, scalable, and highly available. This paper uses a blocking model developed for telephone systems to evaluate video server cluster topologies. The goal is to achieve high utilization of the components and low per-stream cost combined with low blocking probability and high user satisfaction. The analysis shows substantial economies of scale achieved by larger server images. Simple distributed server architectures can result in partitioning of resources with low achievable resource utilization. By comparing achievable resource utilization of partitioned and monolithic servers, we quantify the cost of partitioning. Next, we present an architecture for a distributed server system that avoids resource partitioning and results in highly efficient server clusters. Finally, we show how, in these server clusters, further optimizations can be achieved through caching and batching of video streams.

A flexible and testable software architecture: applying presenter first to a device server for the DOOCS accelerator control system of the European XFEL

International Nuclear Information System (INIS)

Beckmann, A.; Karabekyan, S.; Pflüger, J.

2012-01-01

Presenter First (PF) uses a variant of Model View Presenter design pattern to add implementation flexibility and to improve testability of complex event-driven applications. It has been introduced in the context of GUI applications, but can easily be adapted to server applications. This paper describes how Presenter First methodology is used to develop a device server for the Programmable Logic Controls (PLC) of the European XFEL undulator systems, which are Windows PCs running PLC software from Beckhoff. The server implements a ZeroMQ message interface to the PLC allowing the DOOCS accelerator control system of the European XFEL to exchange data with the PLC by sending messages over the network. Our challenge is to develop a well-tested device server with a flexible architecture that allows integrating the server into other accelerator control systems like EPICS. (author)

Optimal Configuration of Fault-Tolerance Parameters for Distributed Server Access

DEFF Research Database (Denmark)

Daidone, Alessandro; Renier, Thibault; Bondavalli, Andrea

2013-01-01

Server replication is a common fault-tolerance strategy to improve transaction dependability for services in communications networks. In distributed architectures, fault-diagnosis and recovery are implemented via the interaction of the server replicas with the clients and other entities...... model using stochastic activity networks (SAN) for the evaluation of performance and dependability metrics of a generic transaction-based service implemented on a distributed replication architecture. The composite SAN model can be easily adapted to a wide range of client-server applications deployed...

CACHING DATA STORED IN SQL SERVER FOR OPTIMIZING THE PERFORMANCE

Directory of Open Access Journals (Sweden)

Demian Horia

2016-12-01

Full Text Available This paper present the architecture of web site with different techniques used for optimize the performance of loading the web content. The architecture presented here is for e-commerce site developed on windows with MVC, IIS and Micosoft SQL Server. Caching the data is one technique used by the browsers, by the web servers itself or by proxy servers. Caching the data is made without the knowledge of users and need to provide to user the more recent information from the server. This means that caching mechanism has to be aware of any modification of data on the server. There are different information’s presented in e-commerce site related to products like images, code of product, description, properties or stock

SIP end to end performance metrics

OpenAIRE

Vozňák, Miroslav; Rozhon, Jan

2012-01-01

The paper deals with a SIP performance testing methodology. The main contribution to the field of performance testing of SIP infrastructure consists in the possibility to perform the standardized stress tests with the developed SIP TesterApp without a deeper knowledge in the area of SIP communication. The developed tool exploits several of open-source applications such as jQuery, Python, JSON and the cornerstone SIP generator SIPp, the result is highly modifiable and the ...

CheD: chemical database compilation tool, Internet server, and client for SQL servers.

Science.gov (United States)

Trepalin, S V; Yarkov, A V

2001-01-01

An efficient program, which runs on a personal computer, for the storage, retrieval, and processing of chemical information, is presented, The program can work both as a stand-alone application or in conjunction with a specifically written Web server application or with some standard SQL servers, e.g., Oracle, Interbase, and MS SQL. New types of data fields are introduced, e.g., arrays for spectral information storage, HTML and database links, and user-defined functions. CheD has an open architecture; thus, custom data types, controls, and services may be added. A WWW server application for chemical data retrieval features an easy and user-friendly installation on Windows NT or 95 platforms.

Client/Server Architecture Promises Radical Changes.

Science.gov (United States)

Freeman, Grey; York, Jerry

1991-01-01

This article discusses the emergence of the client/server paradigm for the delivery of computer applications, its emergence in response to the proliferation of microcomputers and local area networks, the applicability of the model in academic institutions, and its implications for college campus information technology organizations. (Author/DB)

Instant Messaging by SIP

Science.gov (United States)

Muhi, Daniel; Dulai, Tibor; Jaskó, Szilárd

2008-11-01

SIP is a general-purpose application layer protocol which is able to establish sessions between two or more parties. These sessions are mainly telephone calls and multimedia conferences. However it can be used for other purposes like instant messaging and presence service. SIP has a very important role in mobile communication as more and more communicating applications are going mobile. In this paper we would like to show how SIP can be used for instant messaging purposes.

Towards a Light-weight Bag-of-tasks Grid Architecture

Directory of Open Access Journals (Sweden)

I. Bašičević

2015-06-01

Full Text Available The paper presents the application of SIP protocol in the context of bag-of-tasks grid architecture. The SIP protocol has been used in the realization of the execution management service. The main idea is the use of stateful SIP proxy as a request broker. The paper provides a description of the concept, and the prototype system that has been built, as well as the calculation of estimated performance level and its relation to maximum RTT of grid system. The main advantage of this light-weight grid architecture is the reuse of a mature infrastructure. A short overview of some approaches to the mathematical modeling of computer grids is included.

Experience with Server Self Service Center (S3C)

International Nuclear Information System (INIS)

Sucik, Juraj; Bukowiec, Sebastian

2010-01-01

CERN has a successful experience with running Server Self Service Center (S3C) for virtual server provisioning which is based on Microsoft (registered) Virtual Server 2005. With the introduction of Windows Server 2008 and its built-in hypervisor based virtualization (Hyper-V) there are new possibilities for the expansion of the current service. This paper describes the architecture of the redesigned virtual Server Self Service based on Hyper-V which provides dynamically scalable virtualized resources on demand as needed and outlines the possible implications on the future use of virtual machines at CERN.

Experience with Server Self Service Center (S3C)

CERN Multimedia

Sucik, J

2009-01-01

CERN has a successful experience with running Server Self Service Center (S3C) for virtual server provisioning which is based on Microsoft® Virtual Server 2005. With the introduction of Windows Server 2008 and its built-in hypervisor based virtualization (Hyper-V) there are new possibilities for the expansion of the current service. This paper describes the architecture of the redesigned virtual Server Self Service based on Hyper-V which provides dynamically scalable virtualized resources on demand as needed and outlines the possible implications on the future use of virtual machines at CERN.

SACA: Self-Aware Communication Architecture for IoT Using Mobile Fog Servers

Directory of Open Access Journals (Sweden)

Vishal Sharma

2017-01-01

Full Text Available Internet of things (IoT aims at bringing together large business enterprise solutions and architectures for handling the huge amount of data generated by millions of devices. For this aim, IoT is necessary to connect various devices and provide a common platform for storage and retrieval of information without fail. However, the success of IoT depends on the novelty of network and its capability in sustaining the increasing demand by users. In this paper, a self-aware communication architecture (SACA is proposed for sustainable networking over IoT devices. The proposed approach employs the concept of mobile fog servers which make relay using the train and unmanned aerial vehicle (UAV networks. The problem is presented based on Wald’s maximum model, which is resolved by the application of a distributed node management (DNM system and state dependency formulations. The proposed approach is capable of providing prolonged connectivity by increasing the network reliability and sustainability even in the case of failures. The effectiveness of the proposed approach is demonstrated through numerical and network simulations in terms of significant gains attained with lesser delay and fewer packet losses. The proposed approach is also evaluated against Sybil, wormhole, and DDoS attacks for analyzing its sustainability and probability of connectivity in unfavorable conditions.

Client/server approach to image capturing

Science.gov (United States)

Tuijn, Chris; Stokes, Earle

1998-01-01

The diversity of the digital image capturing devices on the market today is quite astonishing and ranges from low-cost CCD scanners to digital cameras (for both action and stand-still scenes), mid-end CCD scanners for desktop publishing and pre- press applications and high-end CCD flatbed scanners and drum- scanners with photo multiplier technology. Each device and market segment has its own specific needs which explains the diversity of the associated scanner applications. What all those applications have in common is the need to communicate with a particular device to import the digital images; after the import, additional image processing might be needed as well as color management operations. Although the specific requirements for all of these applications might differ considerably, a number of image capturing and color management facilities as well as other services are needed which can be shared. In this paper, we propose a client/server architecture for scanning and image editing applications which can be used as a common component for all these applications. One of the principal components of the scan server is the input capturing module. The specification of the input jobs is based on a generic input device model. Through this model we make abstraction of the specific scanner parameters and define the scan job definitions by a number of absolute parameters. As a result, scan job definitions will be less dependent on a particular scanner and have a more universal meaning. In this context, we also elaborate on the interaction of the generic parameters and the color characterization (i.e., the ICC profile). Other topics that are covered are the scheduling and parallel processing capabilities of the server, the image processing facilities, the interaction with the ICC engine, the communication facilities (both in-memory and over the network) and the different client architectures (stand-alone applications, TWAIN servers, plug-ins, OLE or Apple-event driven

Intelligent Advanced Communications IP Telephony Feasibility for the U.S. Navy. Volume 1

Science.gov (United States)

2007-10-01

endpoint server, H.323<->SIP Proxy, SIP session border controller, SIP router, SIP registration server, Jingle server, ISDN passive and active...34 Support for SIP, AIX2, H.323 and Jingle protocols " Support for traditional digital telephony circuits, including hardware support for personal

Lightweight SIP/SDP compression scheme (LSSCS)

Science.gov (United States)

Wu, Jian J.; Demetrescu, Cristian

2001-10-01

In UMTS new IP based services with tight delay constraints will be deployed over the W-CDMA air interface such as IP multimedia and interactive services. To integrate the wireline and wireless IP services, 3GPP standard forum adopted the Session Initiation Protocol (SIP) as the call control protocol for the UMTS Release 5, which will implement next generation, all IP networks for real-time QoS services. In the current form the SIP protocol is not suitable for wireless transmission due to its large message size which will need either a big radio pipe for transmission or it will take far much longer to transmit than the current GSM Call Control (CC) message sequence. In this paper we present a novel compression algorithm called Lightweight SIP/SDP Compression Scheme (LSSCS), which acts at the SIP application layer and therefore removes the information redundancy before it is sent to the network and transport layer. A binary octet-aligned header is added to the compressed SIP/SDP message before sending it to the network layer. The receiver uses this binary header as well as the pre-cached information to regenerate the original SIP/SDP message. The key features of the LSSCS compression scheme are presented in this paper along with implementation examples. It is shown that this compression algorithm makes SIP transmission efficient over the radio interface without losing the SIP generality and flexibility.

Migration of the CNA maintenance information system to a client server architecture

International Nuclear Information System (INIS)

Gonzalez Crego, E.; Martin Lopez-Suevos, C.

1994-01-01

The paper explains the guidelines and methodology followed to carry out regulation of the CNA computerized maintenance system (SIGE) to a system with a client/server architecture based on ORACLE. The following guidelines were established to carry out migration: 1 Ensure that the new system would contain all the information of the former system, ie, no information would be lost during migration. 2 Improve the technical design of the application, while maintaining at least the functionality of the former application 3 incorporate modifications into the application which would permit incremental improvement of its functionality. 4 Carry out migration at the minimum cost in time and resources to construct the application, a strict development methodology was followed and certain standards were drawn up to significantly increase the speed. Special use was made of: 1 Data models 2 Process models which operate the data model 3 SQL-FORMS standards 4 Safety features

The HydroServer Platform for Sharing Hydrologic Data

Science.gov (United States)

Tarboton, D. G.; Horsburgh, J. S.; Schreuders, K.; Maidment, D. R.; Zaslavsky, I.; Valentine, D. W.

2010-12-01

The CUAHSI Hydrologic Information System (HIS) is an internet based system that supports sharing of hydrologic data. HIS consists of databases connected using the Internet through Web services, as well as software for data discovery, access, and publication. The HIS system architecture is comprised of servers for publishing and sharing data, a centralized catalog to support cross server data discovery and a desktop client to access and analyze data. This paper focuses on HydroServer, the component developed for sharing and publishing space-time hydrologic datasets. A HydroServer is a computer server that contains a collection of databases, web services, tools, and software applications that allow data producers to store, publish, and manage the data from an experimental watershed or project site. HydroServer is designed to permit publication of data as part of a distributed national/international system, while still locally managing access to the data. We describe the HydroServer architecture and software stack, including tools for managing and publishing time series data for fixed point monitoring sites as well as spatially distributed, GIS datasets that describe a particular study area, watershed, or region. HydroServer adopts a standards based approach to data publication, relying on accepted and emerging standards for data storage and transfer. CUAHSI developed HydroServer code is free with community code development managed through the codeplex open source code repository and development system. There is some reliance on widely used commercial software for general purpose and standard data publication capability. The sharing of data in a common format is one way to stimulate interdisciplinary research and collaboration. It is anticipated that the growing, distributed network of HydroServers will facilitate cross-site comparisons and large scale studies that synthesize information from diverse settings, making the network as a whole greater than the sum of its

Asynchronous data change notification between database server and accelerator controls system

International Nuclear Information System (INIS)

Fu, W.; Morris, J.; Nemesure, S.

2011-01-01

Database data change notification (DCN) is a commonly used feature. Not all database management systems (DBMS) provide an explicit DCN mechanism. Even for those DBMS's which support DCN (such as Oracle and MS SQL server), some server side and/or client side programming may be required to make the DCN system work. This makes the setup of DCN between database server and interested clients tedious and time consuming. In accelerator control systems, there are many well established software client/server architectures (such as CDEV, EPICS, and ADO) that can be used to implement data reflection servers that transfer data asynchronously to any client using the standard SET/GET API. This paper describes a method for using such a data reflection server to set up asynchronous DCN (ADCN) between a DBMS and clients. This method works well for all DBMS systems which provide database trigger functionality. Asynchronous data change notification (ADCN) between database server and clients can be realized by combining the use of a database trigger mechanism, which is supported by major DBMS systems, with server processes that use client/server software architectures that are familiar in the accelerator controls community (such as EPICS, CDEV or ADO). This approach makes the ADCN system easy to set up and integrate into an accelerator controls system. Several ADCN systems have been set up and used in the RHIC-AGS controls system.

SIP protocol model for OMNET++

Directory of Open Access Journals (Sweden)

Jan Kucerak

2016-01-01

Full Text Available The article describes our new SIP protocol implementation for the OMNeT++ simulation framework. OMNeT++ simulation framework provides an extensive support of IP related protocols, nevertheless a working SIP protocol implementation is missing. Real measurements were also done using a SIPp traffic generator and the results are compared to those obtained by our new SIP model. Since this work is a part of bigger project concerned strictly on measuring "first response times" over networks with a faulty transmission links, the actually collected statistics are focused only this way.

Mast-sipping in EPR trademark plants

International Nuclear Information System (INIS)

Langenberger, Jan; Schienbein, Marcel; Geier, Roland

2010-01-01

For more than 20 years, AREVA applies and develops different sipping techniques to identify fuel assemblies with leaking fuel rods. For the EPR trademark reactors a Mast Sipping System with newest developments will be implemented considering radiation protection and latest standards requirements. The innovative EPR trademark Sipping System differs from previous systems in many ways. One of the main innovations is that all the necessary processes of the Sipping system have been fully digitized. Second, several ALARA design modifications have been implemented to meet the current radiation protection requirements. An additional implementable multilingual assistance program facilitates the handling of the system and helps to prevent incorrect operation. (orig.)

Microsoft SQL Server OLAP Solution - A Survey

OpenAIRE

Badiozamany, Sobhan

2010-01-01

Microsoft SQL Server 2008 offers technologies for performing On-Line Analytical Processing (OLAP), directly on data stored in data warehouses, instead of moving the data into some offline OLAP tool. This brings certain benefits, such as elimination of data copying and better integration with the DBMS compared with off-line OLAP tools. This report reviews SQL Server support for OLAP, solution architectures, tools and components involved. Standard storage options are discussed but the focus of ...

The ABC Adaptive Fusion Architecture

DEFF Research Database (Denmark)

Bunde-Pedersen, Jonathan; Mogensen, Martin; Bardram, Jakob Eyvind

2006-01-01

Contemporary distributed collaborative systems tend to utilizeeither a client-server or a pure peer-to-peer paradigm. Aclient-server solution may potentially spawn direct connectionsbetween the clients to offload the server thereby creatinga hybrid architecture. A pure peer-to-peer paradigmmay on...

Cooperation of Ukrainian regulatory authorities in the SIP

Energy Technology Data Exchange (ETDEWEB)

Kutina, L.; Bachner, D.; Bykov, V.; Erickson, L.; Kondralyev, S.; Redko, V.; Simonov, I.; Vasilchenko, V. [SSTC NRS, Stusa St. 35-37, 03142, Kyiv (Ukraine)

2003-07-01

The State Nuclear Regulatory Committee of Ukraine (SNRCU) supported by the State Scientific and Technical Center (SSTC) and the Licensing consultant (LC - RISKAUDIT/SCIENTECH) coordinates the activities of other regulatory authorities (RA) within the Shelter Implementation Plan (SIP) licensing. A protocol on cooperation and differentiation of competence in the SIP has been agreed between SNRCU and other RA (Ecology, Health, Construction, Occupational safety, Fire). The RA intended to carry out their activities such that SIP be implemented in the most efficient way by: - providing the Chernobyl NPP with a possibility to choose optimal variants for Shelter transformation; - minimizing required regulatory steps for SIP; - reviewing SIP documents at the initial stages of development of SIP designs; - providing consultative support by technical support organizations (TSO) on the SIP designs; - relating regulatory decisions on safety issues to the competence of the inspection at the Chernobyl NPP site. Coordination of regulatory activity and cooperation in safety areas are presented.

Design and Delivery of Multiple Server-Side Computer Languages Course

Science.gov (United States)

Wang, Shouhong; Wang, Hai

2011-01-01

Given the emergence of service-oriented architecture, IS students need to be knowledgeable of multiple server-side computer programming languages to be able to meet the needs of the job market. This paper outlines the pedagogy of an innovative course of multiple server-side computer languages for the undergraduate IS majors. The paper discusses…

LOCATION-BASED SERVICES USING SIP

OpenAIRE

Abdullah Azfar,; Md. Sakhawat Hossen,; María José Peroza Marval; Razib Hayat Khan

2010-01-01

Due to the popularity of Location-Based Services and IP telephony, we decided to review a number of different proposals to implement Location-Based Services over a SIP-based mobile network. The result is an interesting overview about the potential functionalities of Location-Based Services and the capabilities of SIP for implementingthese services.

75 FR 28626 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): SIP 10...

Science.gov (United States)

2010-05-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): SIP 10-029, Pilot Study... Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC) announces the...

The ABC Adaptive Fusion Architecture

DEFF Research Database (Denmark)

Bunde-Pedersen, Jonathan; Mogensen, Martin; Bardram, Jakob Eyvind

2006-01-01

and early implementation of a systemcapable of adapting to its operating environment, choosingthe best fit combination of the client-server and peerto-peer architectures. The architecture creates a seamlessintegration between a centralized hybrid architecture and adecentralized architecture, relying on what...

75 FR 32190 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): SIP 10...

Science.gov (United States)

2010-06-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): SIP 10-033, Innovative... with Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease...

Design of an Electronic Healthcare Record Server Based on Part 1 of ISO EN 13606

Directory of Open Access Journals (Sweden)

Tony Austin

2011-01-01

Full Text Available ISO EN 13606 is a newly approved standard at European and ISO levels for the meaningful exchange of clinical information between systems. Although conceived as an inter-operability standard to which existing electronic health record (EHR systems will transform legacy data, the requirements met and architectural approach reflected in this standard also make it a good candidate for the internal architecture of an EHR server. The authors have built such a server for the storage of healthcare records and demonstrated that it is possible to use ISO EN 13606 part 1 as the basis of an internal system architecture. The development of the system and some of the applications of the server are described in this paper. It is the first known operational implementation of the standard as an EHR system.

Overload Control in a SIP Signaling Network

OpenAIRE

Masataka Ohta

2007-01-01

The Internet telephony employs a new type of Internet communication on which a mutual communication is realized by establishing sessions. Session Initiation Protocol (SIP) is used to establish sessions between end-users. For unreliable transmission (UDP), SIP message should be retransmitted when it is lost. The retransmissions increase a load of the SIP signaling network, and sometimes lead to performance degradation when a network is overloaded. The paper proposes an overload control for a S...

Clone of EPA Approved Regulations in the Texas SIP

Science.gov (United States)

changed name to EPA Approved Regulations in the Texas SIP, Add links to:Texas Read Me; Texas SIP History;Current/Previous SIP-Approved Regulations; Delete regulations--now in /node/191099, removed tables

TELESCOPE sipping - a proven fuel leak detection system

International Nuclear Information System (INIS)

Deleryd, R.; Collin, P.

1996-01-01

The advantages of the TELESCOPE sipping method are: For BWRs: clamp-on sipping nozzle, which attaches easily to the grapple of the telescope mast on the refuelling platform, but does not affect its operation; no heavy and large sipping bells have to be operated in the core with risk of damage, entangled hoses or lifting rods/wires; the sipping can also be performed for testing long time storaged fuel in the spent fuel pool. For PWRs: simple attachment of water suction hose or tube to the refuelling platform mast. (orig./DG)

CORAL Server and CORAL Server Proxy: Scalable Access to Relational Databases from CORAL Applications

International Nuclear Information System (INIS)

Valassi, A; Kalkhof, A; Bartoldus, R; Salnikov, A; Wache, M

2011-01-01

The CORAL software is widely used at CERN by the LHC experiments to access the data they store on relational databases, such as Oracle. Two new components have recently been added to implement a model involving a middle tier 'CORAL server' deployed close to the database and a tree of 'CORAL server proxies', providing data caching and multiplexing, deployed close to the client. A first implementation of the two new components, released in the summer 2009, is now deployed in the ATLAS online system to read the data needed by the High Level Trigger, allowing the configuration of a farm of several thousand processes. This paper reviews the architecture of the software, its development status and its usage in ATLAS.

NAT Traversing Solutions for SIP Applications

Directory of Open Access Journals (Sweden)

Huang Ya-Lin

2008-01-01

Full Text Available Abstract Session Initiation Protocol (SIP has been proposed for multimedia services and wide-area connectivity in smart home environments (SHEs. An important issue for SIP deployment in SHEs is network address translator (NAT traversing. SIP and Real-time Transport Protocol (RTP packets are delivered between an SHE (i.e., private IP network and Internet (i.e., a public IP network through an NAT function of a home gateway, and the NAT translates the IP/transport layer address and port number but leaves the application layer content unchanged. This results in inconsistency between the IP addresses/port numbers in the IP/transport layers and those in the SIP layer. To resolve this issue, we describe six solutions including static route, UPnP, STUN, ICE, ALG, and SBC. Then we compare these solutions in terms of smart home appliance (SHA modification, scope of NATs supported, multilayer NAT traversal, ease of configuration, security issue, and time complexities.

NAT Traversing Solutions for SIP Applications

Directory of Open Access Journals (Sweden)

Han-Chieh Chao

2008-05-01

Full Text Available Session Initiation Protocol (SIP has been proposed for multimedia services and wide-area connectivity in smart home environments (SHEs. An important issue for SIP deployment in SHEs is network address translator (NAT traversing. SIP and Real-time Transport Protocol (RTP packets are delivered between an SHE (i.e., private IP network and Internet (i.e., a public IP network through an NAT function of a home gateway, and the NAT translates the IP/transport layer address and port number but leaves the application layer content unchanged. This results in inconsistency between the IP addresses/port numbers in the IP/transport layers and those in the SIP layer. To resolve this issue, we describe six solutions including static route, UPnP, STUN, ICE, ALG, and SBC. Then we compare these solutions in terms of smart home appliance (SHA modification, scope of NATs supported, multilayer NAT traversal, ease of configuration, security issue, and time complexities.

Protocol d'inicialització de sessió SIP

OpenAIRE

Ibrahem Fernández, Samer

2006-01-01

Aquest projecte té com a finalitat estudiar el protocol SIP i desenvolupar una aplicació que l'implementi. Este proyecto tiene como finalidad estudiar el protocolo SIP y desarrollar una aplicación que la implemente The purpose of this project is to study the SIP protocol and develop an application that implements it.

Database architectures for Space Telescope Science Institute

Science.gov (United States)

Lubow, Stephen

1993-08-01

At STScI nearly all large applications require database support. A general purpose architecture has been developed and is in use that relies upon an extended client-server paradigm. Processing is in general distributed across three processes, each of which generally resides on its own processor. Database queries are evaluated on one such process, called the DBMS server. The DBMS server software is provided by a database vendor. The application issues database queries and is called the application client. This client uses a set of generic DBMS application programming calls through our STDB/NET programming interface. Intermediate between the application client and the DBMS server is the STDB/NET server. This server accepts generic query requests from the application and converts them into the specific requirements of the DBMS server. In addition, it accepts query results from the DBMS server and passes them back to the application. Typically the STDB/NET server is local to the DBMS server, while the application client may be remote. The STDB/NET server provides additional capabilities such as database deadlock restart and performance monitoring. This architecture is currently in use for some major STScI applications, including the ground support system. We are currently investigating means of providing ad hoc query support to users through the above architecture. Such support is critical for providing flexible user interface capabilities. The Universal Relation advocated by Ullman, Kernighan, and others appears to be promising. In this approach, the user sees the entire database as a single table, thereby freeing the user from needing to understand the detailed schema. A software layer provides the translation between the user and detailed schema views of the database. However, many subtle issues arise in making this transformation. We are currently exploring this scheme for use in the Hubble Space Telescope user interface to the data archive system (DADS).

Hierarchical storage of large volume of multidector CT data using distributed servers

Science.gov (United States)

Ratib, Osman; Rosset, Antoine; Heuberger, Joris; Bandon, David

2006-03-01

Multidector scanners and hybrid multimodality scanners have the ability to generate large number of high-resolution images resulting in very large data sets. In most cases, these datasets are generated for the sole purpose of generating secondary processed images and 3D rendered images as well as oblique and curved multiplanar reformatted images. It is therefore not essential to archive the original images after they have been processed. We have developed an architecture of distributed archive servers for temporary storage of large image datasets for 3D rendering and image processing without the need for long term storage in PACS archive. With the relatively low cost of storage devices it is possible to configure these servers to hold several months or even years of data, long enough for allowing subsequent re-processing if required by specific clinical situations. We tested the latest generation of RAID servers provided by Apple computers with a capacity of 5 TBytes. We implemented a peer-to-peer data access software based on our Open-Source image management software called OsiriX, allowing remote workstations to directly access DICOM image files located on the server through a new technology called "bonjour". This architecture offers a seamless integration of multiple servers and workstations without the need for central database or complex workflow management tools. It allows efficient access to image data from multiple workstation for image analysis and visualization without the need for image data transfer. It provides a convenient alternative to centralized PACS architecture while avoiding complex and time-consuming data transfer and storage.

A Comparison Between Publish-and-Subscribe and Client-Server Models in Distributed Control System Networks

Science.gov (United States)

Boulanger, Richard P., Jr.; Kwauk, Xian-Min; Stagnaro, Mike; Kliss, Mark (Technical Monitor)

1998-01-01

The BIO-Plex control system requires real-time, flexible, and reliable data delivery. There is no simple "off-the-shelf 'solution. However, several commercial packages will be evaluated using a testbed at ARC for publish- and-subscribe and client-server communication architectures. Point-to-point communication architecture is not suitable for real-time BIO-Plex control system. Client-server architecture provides more flexible data delivery. However, it does not provide direct communication among nodes on the network. Publish-and-subscribe implementation allows direct information exchange among nodes on the net, providing the best time-critical communication. In this work Network Data Delivery Service (NDDS) from Real-Time Innovations, Inc. ARTIE will be used to implement publish-and subscribe architecture. It offers update guarantees and deadlines for real-time data delivery. Bridgestone, a data acquisition and control software package from National Instruments, will be tested for client-server arrangement. A microwave incinerator located at ARC will be instrumented with a fieldbus network of control devices. BridgeVIEW will be used to implement an enterprise server. An enterprise network consisting of several nodes at ARC and a WAN connecting ARC and RISC will then be setup to evaluate proposed control system architectures. Several network configurations will be evaluated for fault tolerance, quality of service, reliability and efficiency. Data acquired from these network evaluation tests will then be used to determine preliminary design criteria for the BIO-Plex distributed control system.

Asynchronous data change notification between database server and accelerator control systems

International Nuclear Information System (INIS)

Wenge Fu; Seth Nemesure; Morris, J.

2012-01-01

Database data change notification (DCN) is a commonly used feature, it allows to be informed when the data has been changed on the server side by another client. Not all database management systems (DBMS) provide an explicit DCN mechanism. Even for those DBMS's which support DCN (such as Oracle and MS SQL server), some server side and/or client side programming may be required to make the DCN system work. This makes the setup of DCN between database server and interested clients tedious and time consuming. In accelerator control systems, there are many well established software client/server architectures (such as CDEV, EPICS, and ADO) that can be used to implement data reflection servers that transfer data asynchronously to any client using the standard SET/GET API. This paper describes a method for using such a data reflection server to set up asynchronous DCN (ADCN) between a DBMS and clients. This method works well for all DBMS systems which provide database trigger functionality. (authors)

Measurements of SIP Signaling over 802.11b Links

NARCIS (Netherlands)

Hesselman, C.E.W.; Eertink, Henk; Eertink, E.H.; Widya, I.A.; Huizer, E.

The Session Initiation Protocol (SIP) is a popular application-level signaling protocol that is used for a wide variety of applications such as session control and mobility handling. In some of these applications, the exchange of SIP messages is time-critical, for instance when SIP is used to handle

{sup 124}I-L19-SIP for immuno-PET imaging of tumour vasculature and guidance of {sup 131}I-L19-SIP radioimmunotherapy

Energy Technology Data Exchange (ETDEWEB)

Tijink, Bernard M.; Perk, Lars R.; Budde, Marianne; Stigter-van Walsum, Marijke; Leemans, C.R. [VU University Medical Center, Department of Otolaryngology/Head and Neck Surgery, Amsterdam (Netherlands); Visser, Gerard W.M.; Kloet, Reina W. [VU University Medical Center, Nuclear Medicine and PET Research, Amsterdam (Netherlands); Dinkelborg, Ludger M. [Bayer Schering Pharma AG, Global Drug Discovery, Berlin (Germany); Neri, Dario [Swiss Federal Institute of Technology, Institute of Pharmaceutical Sciences, Zurich (Switzerland); Dongen, Guus A.M.S. van [VU University Medical Center, Department of Otolaryngology/Head and Neck Surgery, Amsterdam (Netherlands); VU University Medical Center, Nuclear Medicine and PET Research, Amsterdam (Netherlands)

2009-08-15

The human monoclonal antibody (MAb) fragment L19-SIP is directed against extra domain B (ED-B) of fibronectin, a marker of tumour angiogenesis. A clinical radioimmunotherapy (RIT) trial with {sup 131}I-L19-SIP was recently started. In the present study, after GMP production of {sup 124}I and efficient production of {sup 124}I-L19-SIP, we aimed to demonstrate the suitability of {sup 124}I-L19-SIP immuno-PET for imaging of angiogenesis at early-stage tumour development and as a scouting procedure prior to clinical {sup 131}I-L19-SIP RIT. {sup 124}I was produced in a GMP compliant way via {sup 124}Te(p,n){sup 124}I reaction and using a TERIMO trademark module for radioiodine separation. L19-SIP was radioiodinated by using a modified version of the IODO-GEN method. The biodistribution of coinjected {sup 124}I- and {sup 131}I-L19-SIP was compared in FaDu xenograft-bearing nude mice, while {sup 124}I PET images were obtained from mice with tumours of <50 to {proportional_to}700 mm{sup 3}. {sup 124}I was produced highly pure with an average yield of 15.4 {+-} 0.5 MBq/{mu}Ah, while separation yield was {proportional_to}90% efficient with <0.5% loss of TeO{sub 2}. Overall labelling efficiency, radiochemical purity and immunoreactive fraction were for {sup 124}I-L19-SIP: {proportional_to}80, 99.9 and >90%, respectively. Tumour uptake was 7.3{+-}2.1, 10.8{+-}1.5, 7.8{+-}1.4, 5.3{+-}0.6 and 3.1{+-}0.4%ID/g at 3, 6, 24, 48 and 72 h p.i., resulting in increased tumour to blood ratios ranging from 6.0 at 24 h to 45.9 at 72 h p.i. Fully concordant labelling and biodistribution results were obtained with {sup 124}I- and {sup 131}I-L19-SIP. Immuno-PET with {sup 124}I-L19-SIP using a high-resolution research tomograph PET scanner revealed clear delineation of the tumours as small as 50 mm{sup 3} and no adverse uptake in other organs. {sup 124}I-MAb conjugates for clinical immuno-PET can be efficiently produced. Immuno-PET with {sup 124}I-L19-SIP appeared qualified for sensitive

CacyBP/SIP promotes the proliferation of colon cancer cells.

Directory of Open Access Journals (Sweden)

Huihong Zhai

Full Text Available CacyBP/SIP is a component of the ubiquitin pathway and is overexpressed in several transformed tumor tissues, including colon cancer, which is one of the most common cancers worldwide. It is unknown whether CacyBP/SIP promotes the proliferation of colon cancer cells. This study examined the expression level, subcellular localization, and binding activity of CacyBP/SIP in human colon cancer cells in the presence and absence of the hormone gastrin. We found that CacyBP/SIP was expressed in a high percentage of colon cancer cells, but not in normal colonic surface epithelium. CacyBP/SIP promoted the cell proliferation of colon cancer cells under both basal and gastrin stimulated conditions as shown by knockdown studies. Gastrin stimulation triggered the translocation of CacyBP/SIP to the nucleus, and enhanced interaction between CacyBP/SIP and SKP1, a key component of ubiquitination pathway which further mediated the proteasome-dependent degradation of p27kip1 protein. The gastrin induced reduction in p27kip1 was prevented when cells were treated with the proteasome inhibitor MG132. These results suggest that CacyBP/SIP may be promoting growth of colon cancer cells by enhancing ubiquitin-mediated degradation of p27kip1.

Installing and Testing a Server Operating System

Directory of Open Access Journals (Sweden)

Lorentz JÄNTSCHI

2003-08-01

Full Text Available The paper is based on the experience of the author with the FreeBSD server operating system administration on three servers in use under academicdirect.ro domain.The paper describes a set of installation, preparation, and administration aspects of a FreeBSD server.First issue of the paper is the installation procedure of FreeBSD operating system on i386 computer architecture. Discussed problems are boot disks preparation and using, hard disk partitioning and operating system installation using a existent network topology and a internet connection.Second issue is the optimization procedure of operating system, server services installation, and configuration. Discussed problems are kernel and services configuration, system and services optimization.The third issue is about client-server applications. Using operating system utilities calls we present an original application, which allows displaying the system information in a friendly web interface. An original program designed for molecular structure analysis was adapted for systems performance comparisons and it serves for a discussion of Pentium, Pentium II and Pentium III processors computation speed.The last issue of the paper discusses the installation and configuration aspects of dial-in service on a UNIX-based operating system. The discussion includes serial ports, ppp and pppd services configuration, ppp and tun devices using.

Secure data aggregation in heterogeneous and disparate networks using stand off server architecture

Science.gov (United States)

Vimalathithan, S.; Sudarsan, S. D.; Seker, R.; Lenin, R. B.; Ramaswamy, S.

2009-04-01

The emerging global reach of technology presents myriad challenges and intricacies as Information Technology teams aim to provide anywhere, anytime and anyone access, for service providers and customers alike. The world is fraught with stifling inequalities, both from an economic as well as socio-political perspective. The net result has been large capability gaps between various organizational locations that need to work together, which has raised new challenges for information security teams. Similar issues arise, when mergers and acquisitions among and between organizations take place. While integrating remote business locations with mainstream operations, one or more of the issues including the lack of application level support, computational capabilities, communication limitations, and legal requirements cause a serious impediment thereby complicating integration while not violating the organizations' security requirements. Often resorted techniques like IPSec, tunneling, secure socket layer, etc. may not be always techno-economically feasible. This paper addresses such security issues by introducing an intermediate server between corporate central server and remote sites, called stand-off-server. We present techniques such as break-before-make connection, break connection after transfer, multiple virtual machine instances with different operating systems using the concept of a stand-off-server. Our experiments show that the proposed solution provides sufficient isolation for the central server/site from attacks arising out of weak communication and/or computing links and is simple to implement.

Lateral load performance of SIP walls with full bearing

Science.gov (United States)

Boren Yeh; Tom Skaggs; Xiping Wang; Tom Williamson

2018-01-01

The purpose of this study was to develop test data needed to characterize lateral load performance of structural insulated panel (SIP) walls with full bearing (restrained). The research program involved structural testing of 29 full-size SIP walls (8 ft tall by 8 ft long) of various configurations that bracket a range of SIP wall configurations commonly used in the...

Implementação de um sistema SIP para o sistema operacional Linux

OpenAIRE

Davison Gonzaga da Silva

2003-01-01

Resumo: Este trabalho apresenta a implementação de um Sistema de VoIP usando o Protocolo SIP. Este Sistema SIP foi desenvolvido para o Linux, usando-se a linguagem C++ em conjunto com a biblioteca QT. O Sistema SIP é composto de três entidades básicas: o Terminal SIP, o Proxy e o Servidor de Registros. O Terminal SIP é a entidade responsável por estabelecer sessões SIP com outros Terminais SIP. Para o Terminal SIP, foi desenvolvida uma biblioteca de acesso à placa de áudio, que permite a modi...

Towards a semantic web layered architecture

CSIR Research Space (South Africa)

Gerber, AJ

2007-02-01

Full Text Available as an architectural pattern or architectural style [6, 43]. In this section we give a brief description of the con- cepts software architecture and layered architecture. In ad- dition we provide a summary of a list of criteria for layered architectures identified...- els caused some architectural recurrences to evolve. These are described as architectural patterns [6] or architectural styles [43]. Examples of the best known architectural patterns include, but are not limited to, the client/server architectural...

SCADA Architecture for Natural Gas plant

Directory of Open Access Journals (Sweden)

Turc Traian

2009-12-01

Full Text Available The paper describes the Natural Gas Plant SCADA architecture. The main purpose of SCADA system is remote monitoring and controlling of any industrial plant. The SCADA hardware architecture is based on multi-dropping system allowing connecting a large number of different fiels devices. The SCADA Server gathers data from gas plant and stores data to a MtSQL database. The SCADA server is connected to other SCADA client application offers a intuitive and user-friendly HMI. The main benefit of using SCADA is real time displaying of gas plant state. The main contriobution of the authors consists in designing SCADA architecture based on multi-dropping system and Human Machine Interface.

A methodology of SiP testing based on boundary scan

Science.gov (United States)

Qin, He; Quan, Haiyang; Han, Yifei; Zhu, Tianrui; Zheng, Tuo

2017-10-01

System in Package (SiP) play an important role in portable, aerospace and military electronic with the microminiaturization, light weight, high density, and high reliability. At present, SiP system test has encountered the problem on system complexity and malfunction location with the system scale exponentially increase. For SiP system, this paper proposed a testing methodology and testing process based on the boundary scan technology. Combining the character of SiP system and referencing the boundary scan theory of PCB circuit and embedded core test, the specific testing methodology and process has been proposed. The hardware requirement of the under test SiP system has been provided, and the hardware platform of the testing has been constructed. The testing methodology has the character of high test efficiency and accurate malfunction location.

The SAMGrid database server component: its upgraded infrastructure and future development path

International Nuclear Information System (INIS)

Loebel-Carpenter, L.; White, S.; Baranovski, A.; Garzoglio, G.; Herber, R.; Illingworth, R.; Kennedy, R.; Kreymer, A.; Kumar, A.; Lueking, L.; Lyon, A.; Merritt, W.; Terekhov, I.; Trumbo, J.; Veseli, S.; Burgon-Lyon, M.; St Denis, R.; Belforte, S.; Kerzel, U.; Bartsch, V.; Leslie, M.

2004-01-01

The SAMGrid Database Server encapsulates several important services, such as accessing file metadata and replica catalog, keeping track of the processing information, as well as providing the runtime support for SAMGrid station services. Recent deployment of the SAMGrid system for CDF has resulted in unification of the database schema used by CDF and D0, and the complexity of changes required for the unified metadata catalog has warranted a complete redesign of the DB Server. We describe here the architecture and features of the new server. In particular, we discuss the new CORBA infrastructure that utilizes python wrapper classes around IDL structs and exceptions. Such infrastructure allows us to use the same code on both server and client sides, which in turn results in significantly improved code maintainability and easier development. We also discuss future integration of the new server with an SBIR II project which is directed toward allowing the DB Server to access distributed databases, implemented in different DB systems and possibly using different schema

DNA stable-isotope probing (DNA-SIP).

Science.gov (United States)

Dunford, Eric A; Neufeld, Josh D

2010-08-02

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and nutrients into cellular biomass. As such, this cultivation-independent technique has been an important methodology for assigning metabolic function to the diverse communities inhabiting a wide range of terrestrial and aquatic environments. Following the incubation of an environmental sample with stable-isotope labelled compounds, extracted nucleic acid is subjected to density gradient ultracentrifugation and subsequent gradient fractionation to separate nucleic acids of differing densities. Purification of DNA from cesium chloride retrieves labelled and unlabelled DNA for subsequent molecular characterization (e.g. fingerprinting, microarrays, clone libraries, metagenomics). This JoVE video protocol provides visual step-by-step explanations of the protocol for density gradient ultracentrifugation, gradient fractionation and recovery of labelled DNA. The protocol also includes sample SIP data and highlights important tips and cautions that must be considered to ensure a successful DNA-SIP analysis.

Thermo-physical properties of reproducible Sip/Al composites

Institute of Scientific and Technical Information of China (English)

XIU Zi-yang; WU Gao-hui; SONG Mei-hui; ZHU De-zhi

2006-01-01

Three kinds of high volume fraction Sip/1199, Sip/4032 and Sip/4019 composites were fabricated by squeeze casting method. The results show that the clean Si/Al interfaces without interfacial reaction products can decrease the interfacial thermal resistance. The composites have a low coefficient of thermal expansion (7.5×10-6 ℃-1) and high thermal conductivity ranging from 126 to 157.9 W/(m ℃). With increasing temperature, the specific capacity and the average coefficient of thermal expansion increases monotonically, the thermal diffusivity and the thermal conductivity decrease gradually. The specific capacity, average coefficient of thermal expansion, thermal diffusivity and the thermal conductivity of the composites decrease gradually with increasing Si content.The thermal conductivities of composites were calculated by theoretical models. Both Maxwell model and P.G model consider the reinforcement as nearly-round particles, and the interface thermal resistance of Sip/Al composite calculated by EMA method is 0.01×10-6m2.℃/W

Solid Waste Information and Tracking System Server Conversion Project Management Plan

International Nuclear Information System (INIS)

GLASSCOCK, J.A.

2000-01-01

The Project Management Plan governing the conversion of SWITS to a client-server architecture. The PMP describes the background, planning and management of the SWITS conversion. Requirements and specification documentation needed for the SWITS conversion

Creating Large Scale Database Servers

International Nuclear Information System (INIS)

Becla, Jacek

2001-01-01

The BaBar experiment at the Stanford Linear Accelerator Center (SLAC) is designed to perform a high precision investigation of the decays of the B-meson produced from electron-positron interactions. The experiment, started in May 1999, will generate approximately 300TB/year of data for 10 years. All of the data will reside in Objectivity databases accessible via the Advanced Multi-threaded Server (AMS). To date, over 70TB of data have been placed in Objectivity/DB, making it one of the largest databases in the world. Providing access to such a large quantity of data through a database server is a daunting task. A full-scale testbed environment had to be developed to tune various software parameters and a fundamental change had to occur in the AMS architecture to allow it to scale past several hundred terabytes of data. Additionally, several protocol extensions had to be implemented to provide practical access to large quantities of data. This paper will describe the design of the database and the changes that we needed to make in the AMS for scalability reasons and how the lessons we learned would be applicable to virtually any kind of database server seeking to operate in the Petabyte region

Creating Large Scale Database Servers

Energy Technology Data Exchange (ETDEWEB)

Becla, Jacek

2001-12-14

The BaBar experiment at the Stanford Linear Accelerator Center (SLAC) is designed to perform a high precision investigation of the decays of the B-meson produced from electron-positron interactions. The experiment, started in May 1999, will generate approximately 300TB/year of data for 10 years. All of the data will reside in Objectivity databases accessible via the Advanced Multi-threaded Server (AMS). To date, over 70TB of data have been placed in Objectivity/DB, making it one of the largest databases in the world. Providing access to such a large quantity of data through a database server is a daunting task. A full-scale testbed environment had to be developed to tune various software parameters and a fundamental change had to occur in the AMS architecture to allow it to scale past several hundred terabytes of data. Additionally, several protocol extensions had to be implemented to provide practical access to large quantities of data. This paper will describe the design of the database and the changes that we needed to make in the AMS for scalability reasons and how the lessons we learned would be applicable to virtually any kind of database server seeking to operate in the Petabyte region.

Impact of 50% Synthesized Iso-Paraffins (SIP) on F-76 Fuel Coalescence

Science.gov (United States)

2013-12-16

petroleum JP-5 and Synthesized Iso-Paraffins (SIP). SIP fuels are made from direct fermentation of sugar into olefinic hydrocarbons. The olefinic...manufactured scaled down filter/coalescer and separator to simulate the performance of a full-scale filter separator system. This test is designed to predict...5 and Synthesized Iso-Paraffins (SIP). SIP fuels are made from direct fermentation of sugar into olefinic hydrocarbons. The olefinic hydrocarbons

Heterologous protein secretion in Lactobacilli with modified pSIP vectors.

Directory of Open Access Journals (Sweden)

Ingrid Lea Karlskås

Full Text Available We describe new variants of the modular pSIP-vectors for inducible gene expression and protein secretion in lactobacilli. The basic functionality of the pSIP system was tested in Lactobacillus strains representing 14 species using pSIP411, which harbors the broad-host-range Lactococcus lactis SH71rep replicon and a β-glucuronidase encoding reporter gene. In 10 species, the inducible gene expression system was functional. Based on these results, three pSIP vectors with different signal peptides were modified by replacing their narrow-host-range L. plantarum 256rep replicon with SH71rep and transformed into strains of five different species of Lactobacillus. All recombinant strains secreted the target protein NucA, albeit with varying production levels and secretion efficiencies. The Lp_3050 derived signal peptide generally resulted in the highest levels of secreted NucA. These modified pSIP vectors are useful tools for engineering a wide variety of Lactobacillus species.

A Stepwise Approach to Developing Languages for SIP Telephony Service Creation

DEFF Research Database (Denmark)

Palix, Nicolas; Consel, Charles; Reveillere, Laurent

2007-01-01

Developing a SIP-based telephony service requires a programmer to have expertise in telephony rules and constraints, the SIP protocol, distributed systems, and a SIP API, which is often large and complex. These requirements make the development of telephony software an overwhelming challenge...... a scripting language dedicated to the development of telephony services. This approach enables critical properties of services to be guaranteed and captures expertise on the operational behavior of a service. We have applied this approach to developing the Session Processing Language (SPL) dedicated to SIP...

Analisis Perbandingan Load Balancing Web Server Tunggal Dengan Web Server Cluster Menggunakan Linux Virtual Server

OpenAIRE

Lukitasari, Desy; Oklilas, Ahmad Fali

2010-01-01

Virtual server adalah server yang mempunyai skalabilitas dan ketersedian yang tinggi yang dibangun diatas sebuah cluster dari beberapa real server. Real server dan load balancer akan saling terkoneksi baik dalam jaringan lokal kecepatan tinggi atau yang terpisah secara geografis. Load balancer dapat mengirim permintaan-permintaan ke server yang berbeda dan membuat paralel service dari sebuah cluster pada sebuah alamat IP tunggal dan meminta pengiriman dapat menggunakan teknologi IP load...

SIP Signaling Implementations and Performance Enhancement over MANET: A Survey

OpenAIRE

Alshamrani, M; Cruickshank, Haitham; Sun, Zhili; Ansa, G; Alshahwan, F

2016-01-01

The implementation of the Session Initiation Protocol (SIP)-based Voice over Internet Protocol (VoIP) and multimedia over MANET is still a challenging issue. Many routing factors affect the performance of SIP signaling and the voice Quality of Service (QoS). Node mobility in MANET causes dynamic changes to route calculations, topology, hop numbers, and the connectivity status between the correspondent nodes. SIP-based VoIP depends on the caller’s registration, call initiation, and call termin...

Assessing Server Fault Tolerance and Disaster Recovery Implementation in Thin Client Architectures

National Research Council Canada - National Science Library

Slaydon, Samuel L

2007-01-01

This thesis will focus on assessing server fault tolerance and disaster recovery procedures for thin-clients being implemented in smart classrooms and computer laboratories aboard the Naval Postgraduate School campus...

DelPhi web server v2: incorporating atomic-style geometrical figures into the computational protocol.

Science.gov (United States)

Smith, Nicholas; Witham, Shawn; Sarkar, Subhra; Zhang, Jie; Li, Lin; Li, Chuan; Alexov, Emil

2012-06-15

A new edition of the DelPhi web server, DelPhi web server v2, is released to include atomic presentation of geometrical figures. These geometrical objects can be used to model nano-size objects together with real biological macromolecules. The position and size of the object can be manipulated by the user in real time until desired results are achieved. The server fixes structural defects, adds hydrogen atoms and calculates electrostatic energies and the corresponding electrostatic potential and ionic distributions. The web server follows a client-server architecture built on PHP and HTML and utilizes DelPhi software. The computation is carried out on supercomputer cluster and results are given back to the user via http protocol, including the ability to visualize the structure and corresponding electrostatic potential via Jmol implementation. The DelPhi web server is available from http://compbio.clemson.edu/delphi_webserver.

The SIP express router: An open source SIP platform: Presentation held at EVOLUTE - seamlEss multimedia serVices Over alL IP-based infrastrUcTurEs Workshop, 10. November 2003, Guildford, UK

OpenAIRE

Rebahi, Y.; Sisalem, D.; Kuthan, J.; Pelinescu-Oncicul, A.; Iancu, B.; Janak, J.; Mierla, D.C.

2003-01-01

The session initiation protocol (SIP) is constantly gaining in popularity and acceptance as the signaling protocol for next generation multimedia communication. This paper describes a scalable and reliable open source SIP platform called the SIP Express Router (SER). SER does not only support basic SIP features but also advanced features such as messaging and presence, translation between SIP and SMS or Jabber as well as full featured application programming interfaces. In this paper we will ...

Deployment of SIP in MANET: challenges and circumvention

Directory of Open Access Journals (Sweden)

Abdelhamid Salma R.

2017-01-01

Full Text Available The immense growth in wireless network applications has encouraged the researchers to enhance and propose new approaches that facilitate the deployment of the widely used services, protocols, and applications of the wired networking area in the wireless networks. Among which, the Session Initiation Protocol (SIP is a signaling protocol that allows the establishment of multimedia sessions and calls between different parties. SIP functionality totally depends on a centralized infrastructure, and complexity arises when deploying such a protocol in a special type of wireless networks, namely Mobile Ad-hoc Networks (MANET, due to the absence of a centralized infrastructure, and the dynamic topology of the later. This paper highlights the the challenges arising when deploying SIP in MANETs and presents an overview of different proposed approaches to overcome these challenges.

Scalable Distributed Architectures for Information Retrieval

National Research Council Canada - National Science Library

Lu, Zhihong

1999-01-01

.... Our distributed architectures exploit parallelism in information retrieval on a cluster of parallel IR servers using symmetric multiprocessors, and use partial collection replication and selection...

MultiSETTER: web server for multiple RNA structure comparison.

Science.gov (United States)

Čech, Petr; Hoksza, David; Svozil, Daniel

2015-08-12

Understanding the architecture and function of RNA molecules requires methods for comparing and analyzing their tertiary and quaternary structures. While structural superposition of short RNAs is achievable in a reasonable time, large structures represent much bigger challenge. Therefore, we have developed a fast and accurate algorithm for RNA pairwise structure superposition called SETTER and implemented it in the SETTER web server. However, though biological relationships can be inferred by a pairwise structure alignment, key features preserved by evolution can be identified only from a multiple structure alignment. Thus, we extended the SETTER algorithm to the alignment of multiple RNA structures and developed the MultiSETTER algorithm. In this paper, we present the updated version of the SETTER web server that implements a user friendly interface to the MultiSETTER algorithm. The server accepts RNA structures either as the list of PDB IDs or as user-defined PDB files. After the superposition is computed, structures are visualized in 3D and several reports and statistics are generated. To the best of our knowledge, the MultiSETTER web server is the first publicly available tool for a multiple RNA structure alignment. The MultiSETTER server offers the visual inspection of an alignment in 3D space which may reveal structural and functional relationships not captured by other multiple alignment methods based either on a sequence or on secondary structure motifs.

Testing Dialog-Verification of SIP Phones with Single-Message Denial-of-Service Attacks

Science.gov (United States)

Seedorf, Jan; Beckers, Kristian; Huici, Felipe

The Session Initiation Protocol (SIP) is widely used for signaling in multimedia communications. However, many SIP implementations are still in their infancy and vulnerable to malicious messages. We investigate flaws in the SIP implementations of eight phones, showing that the deficient verification of SIP dialogs further aggravates the problem by making it easier for attacks to succeed. Our results show that the majority of the phones we tested are susceptible to these attacks.

Creep Behavior of Structural Insulated Panels (SIPS): Results from a Pilot Study

Science.gov (United States)

Dwight McDonald; Marshall Begel; C. Adam Senalik; Robert Ross; Thomas D. Skaggs; Borjen Yeh; Thomas Williamson

2014-01-01

Structural insulated panels (SIPs) have been recognized as construction materials in the International Residential Code (IRC) since 2009. Although most SIPs are used in wall applications, they can also be used as roof or floor panels that are subjected to long-term transverse loading, for which SIP creep performance may be critical in design. However, limited...

Flexible software architecture for user-interface and machine control in laboratory automation.

Science.gov (United States)

Arutunian, E B; Meldrum, D R; Friedman, N A; Moody, S E

1998-10-01

We describe a modular, layered software architecture for automated laboratory instruments. The design consists of a sophisticated user interface, a machine controller and multiple individual hardware subsystems, each interacting through a client-server architecture built entirely on top of open Internet standards. In our implementation, the user-interface components are built as Java applets that are downloaded from a server integrated into the machine controller. The user-interface client can thereby provide laboratory personnel with a familiar environment for experiment design through a standard World Wide Web browser. Data management and security are seamlessly integrated at the machine-controller layer using QNX, a real-time operating system. This layer also controls hardware subsystems through a second client-server interface. This architecture has proven flexible and relatively easy to implement and allows users to operate laboratory automation instruments remotely through an Internet connection. The software architecture was implemented and demonstrated on the Acapella, an automated fluid-sample-processing system that is under development at the University of Washington.

EarthServer - 3D Visualization on the Web

Science.gov (United States)

Wagner, Sebastian; Herzig, Pasquale; Bockholt, Ulrich; Jung, Yvonne; Behr, Johannes

2013-04-01

EarthServer (www.earthserver.eu), funded by the European Commission under its Seventh Framework Program, is a project to enable the management, access and exploration of massive, multi-dimensional datasets using Open GeoSpatial Consortium (OGC) query and processing language standards like WCS 2.0 and WCPS. To this end, a server/client architecture designed to handle Petabyte/Exabyte volumes of multi-dimensional data is being developed and deployed. As an important part of the EarthServer project, six Lighthouse Applications, major scientific data exploitation initiatives, are being established to make cross-domain, Earth Sciences related data repositories available in an open and unified manner, as service endpoints based on solutions and infrastructure developed within the project. Clients technology developed and deployed in EarthServer ranges from mobile and web clients to immersive virtual reality systems, all designed to interact with a physically and logically distributed server infrastructure using exclusively OGC standards. In this contribution, we would like to present our work on a web-based 3D visualization and interaction client for Earth Sciences data using only technology found in standard web browsers without requiring the user to install plugins or addons. Additionally, we are able to run the earth data visualization client on a wide range of different platforms with very different soft- and hardware requirements such as smart phones (e.g. iOS, Android), different desktop systems etc. High-quality, hardware-accelerated visualization of 3D and 4D content in standard web browsers can be realized now and we believe it will become more and more common to use this fast, lightweight and ubiquitous platform to provide insights into big datasets without requiring the user to set up a specialized client first. With that in mind, we will also point out some of the limitations we encountered using current web technologies. Underlying the EarthServer web client

DelPhiPKa web server: predicting pKa of proteins, RNAs and DNAs.

Science.gov (United States)

Wang, Lin; Zhang, Min; Alexov, Emil

2016-02-15

A new pKa prediction web server is released, which implements DelPhi Gaussian dielectric function to calculate electrostatic potentials generated by charges of biomolecules. Topology parameters are extended to include atomic information of nucleotides of RNA and DNA, which extends the capability of pKa calculations beyond proteins. The web server allows the end-user to protonate the biomolecule at particular pH based on calculated pKa values and provides the downloadable file in PQR format. Several tests are performed to benchmark the accuracy and speed of the protocol. The web server follows a client-server architecture built on PHP and HTML and utilizes DelPhiPKa program. The computation is performed on the Palmetto supercomputer cluster and results/download links are given back to the end-user via http protocol. The web server takes advantage of MPI parallel implementation in DelPhiPKa and can run a single job on up to 24 CPUs. The DelPhiPKa web server is available at http://compbio.clemson.edu/pka_webserver. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

RaptorX-Property: a web server for protein structure property prediction.

Science.gov (United States)

Wang, Sheng; Li, Wei; Liu, Shiwang; Xu, Jinbo

2016-07-08

RaptorX Property (http://raptorx2.uchicago.edu/StructurePropertyPred/predict/) is a web server predicting structure property of a protein sequence without using any templates. It outperforms other servers, especially for proteins without close homologs in PDB or with very sparse sequence profile (i.e. carries little evolutionary information). This server employs a powerful in-house deep learning model DeepCNF (Deep Convolutional Neural Fields) to predict secondary structure (SS), solvent accessibility (ACC) and disorder regions (DISO). DeepCNF not only models complex sequence-structure relationship by a deep hierarchical architecture, but also interdependency between adjacent property labels. Our experimental results show that, tested on CASP10, CASP11 and the other benchmarks, this server can obtain ∼84% Q3 accuracy for 3-state SS, ∼72% Q8 accuracy for 8-state SS, ∼66% Q3 accuracy for 3-state solvent accessibility, and ∼0.89 area under the ROC curve (AUC) for disorder prediction. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Design of Accelerator Online Simulator Server Using Structured Data

International Nuclear Information System (INIS)

Shen, Guobao

2012-01-01

Model based control plays an important role for a modern accelerator during beam commissioning, beam study, and even daily operation. With a realistic model, beam behaviour can be predicted and therefore effectively controlled. The approach used by most current high level application environments is to use a built-in simulation engine and feed a realistic model into that simulation engine. Instead of this traditional monolithic structure, a new approach using a client-server architecture is under development. An on-line simulator server is accessed via network accessible structured data. With this approach, a user can easily access multiple simulation codes. This paper describes the design, implementation, and current status of PVData, which defines the structured data, and PVAccess, which provides network access to the structured data.

Gest-sip1 experiments and post-test calculations with the relap5 code

International Nuclear Information System (INIS)

Achilli, A.; Cattadori, G.; Ferri, R.; Gandolfi, S.; Bianchi, F.; Meloni, P.

2001-01-01

The SIP-1 apparatus (Sistema di Iniezione Passiva) was conceived, designed, numerically simulated and tested by the SIET company as an innovative depressurization and make-up device for the New Generation LWRs. In particular it is suitable to cope with those accidents where pressure in the circuit must be dumped to allow low pressure injection systems to intervene. The main peculiarity of SIP-1 is the capability of de-pressurizing a system by cold water injection, rather than by discharging mass to the outlet, as in the common depressurization systems. ENEA sponsored all the research activity, starting from the SIP-1 design, its numerical simulation with the Relap5 code, the realisation of an experimental facility up to the test execution and post-test calculations. An experimental campaign on the GEST-SIP1 facility was performed in July 2000. The facility is mainly constituted by a U-tube Steam Generator which a proper model of SIP-1 apparatus is connected to. A series of Small Break LOCAs was simulated by varying the break size and different steady conditions were investigated to verify the stability of SIP-1, the lack of unexpected interventions and the actuation modalities. This paper deals with the description of the GEST-SIP1 experimental facility, the SIP-1 operating principles, the most meaningful results of the tests and the capability of the Relap5 code in reproducing phenomena and events. (author)

Overexpressed CacyBP/SIP leads to the suppression of growth in renal cell carcinoma

International Nuclear Information System (INIS)

Sun, Shiren; Ning, Xiaoxuan; Liu, Jie; Liu, Lili; Chen, Yu; Han, Shuang; Zhang, Yanqi; Liang, Jie; Wu, Kaichun; Fan, Daiming

2007-01-01

Calcyclin-binding protein/Siah-1-interacting protein (CacyBP/SIP), a target protein of S100, has been identified as a component of a novel ubiquitinylation complex leading to β-catenin degradation, which was found to be related to the malignant phenotypes of gastric cancer. However, the roles of CacyBP/SIP in renal cell carcinoma still remain unclear. In the present study, we had analyzed the expression of the CacyBP/SIP protein in human renal cancer cells and clinical tissue samples. The possible roles of CacyBP/SIP in regulating the malignant phenotype of renal cancer cells were also investigated. The results demonstrated that the expression of CacyBP/SIP was markedly down-regulated in renal cell carcinoma tissues and cell lines. Ectopic overexpression of CacyBP/SIP in A498 cells inhibited the proliferation of this cell and delayed cell cycle progression significantly, which might be related to the down-regulation of Cyclin D1 through reducing β-catenin protein. CacyBP/SIP also suppressed colony formation in soft agar and its tumorigenicity in nude mice. Taken together, our work showed that CacyBP/SIP, as a novel down-regulated gene in renal cell carcinoma, suppressed proliferation and tumorigenesis of renal cancer cells

UNIX secure server : a free, secure, and functional server example

OpenAIRE

Sastre, Hugo

2016-01-01

The purpose of this thesis work was to introduce UNIX server as a personal server but also as a start point for investigation and developing at a professional level. The objective of this thesis was to build a secure server providing not only a FTP server but also an HTTP server and a cloud system for remote backups. OpenBSD was used as the operating system. OpenBSD is a UNIX-like operating system made by hackers for hackers. The difference with other systems that might partially provid...

A combined wet/dry sipping cell for investigating failed triga fuel elements

International Nuclear Information System (INIS)

Boeck, H.; Gallhammer, H.; Hammer, J.; Israr, M.

1987-08-01

A sipping cell to detect failed triga fuel has been designed and constructed at the Atominstitut. The cell allows both wet- and dry sipping of one single standard triga fuel element. In the dry sipping method the fuel element may be electrically heated up to a maximum temperature of about 300 0 C to allow the detection of temperature dependent fission product release from the fuel element. 20 figs., 1 tab. (Author)

On SIP Session setup delay for VoIP services over correlated fading channels

DEFF Research Database (Denmark)

Fathi, Hanane; Chakraborty, Shyam S.; Prasad, Ramjee

2006-01-01

In this paper, the session setup delay of the session initiation protocol (SIP) is studied. The transmissions on both the forward and reverse channel are assumed to experience Markovian errors. The session setup delay is evaluated for different transport protocols, and with the use of the radio...... link protocol (RLP). An adaptive retransmission timer is used to optimize SIP performances. Using numerical results, we find that SIP over user datagram protocol (UDP) instead of transport control protocol (TCP) can make the session setup up to 30% shorter. Also, RLP drastically reduces the session...... setup delay down to 4 to 5 s, even in environments with high frame error rates (10%) and significant correlation in the fading process (fDT=0.02). SIP is compared with its competitor H.323. SIP session setup delay with compressed messages outperforms H.323 session setup delay....

Moving the Hazard Prediction and Assessment Capability to a Distributed, Portable Architecture

Energy Technology Data Exchange (ETDEWEB)

Lee, RW

2002-09-05

The Hazard Prediction and Assessment Capability (HPAC) has been re-engineered from a Windows application with tight binding between computation and a graphical user interface (GUI) to a new distributed object architecture. The key goals of this new architecture are platform portability, extensibility, deployment flexibility, client-server operations, easy integration with other systems, and support for a new map-based GUI. Selection of Java as the development and runtime environment is the major factor in achieving each of the goals, platform portability in particular. Portability is further enforced by allowing only Java components in the client. Extensibility is achieved via Java's dynamic binding and class loading capabilities and a design by interface approach. HPAC supports deployment on a standalone host, as a heavy client in client-server mode with data stored on the client but calculations performed on the server host, and as a thin client with data and calculations on the server host. The principle architectural element supporting deployment flexibility is the use of Universal Resource Locators (URLs) for all file references. Java WebStart{trademark} is used for thin client deployment. Although there were many choices for the object distribution mechanism, the Common Object Request Broker Architecture (CORBA) was chosen to support HPAC client server operation. HPAC complies with version 2.0 of the CORBA standard and does not assume support for pass-by-value method arguments. Execution in standalone mode is expedited by having most server objects run in the same process as client objects, thereby bypassing CORBA object transport. HPAC provides four levels for access by other tools and systems, starting with a Windows library providing transport and dispersion (T&D) calculations and output generation, detailed and more abstract sets of CORBA services, and reusable Java components.

THE ARCHITECTURE OF THE REMOTE CONTROL SYSTEM OF ROBOTICS OBJECTS

Directory of Open Access Journals (Sweden)

S.V. Shavetov

2014-03-01

Full Text Available The paper deals with the architecture for the universal remote control system of robotics objects over the Internet global network. Control objects are assumed to be located at a considerable distance from a reference device or end-users. An overview of studies on the subject matter of remote control of technical objects is given. A structure chart of the architecture demonstrating the system usage in practice is suggested. Server software is considered that makes it possible to work with technical objects connected to the server as with a serial port and organize a stable tunnel connection between the controlled object and the end-user. The proposed architecture has been successfully tested on mobile robots Parallax Boe-Bot and Lego Mindstorms NXT. Experimental data about values of time delays are given demonstrating the effectiveness of the considered architecture.

78 FR 21281 - Approval and Promulgation of Implementation Plans; State of Missouri; Infrastructure SIP...

Science.gov (United States)

2013-04-10

... existing SIP provisions for this purpose. Instead, EPA is only evaluating whether the state's SIP has basic...) requires SIPs to include provisions to provide for establishment and operation of ambient air quality..., restaurants, etc. triggering GHG PSD requirements. On December 23, 2010, EPA promulgated a subsequent series...

A Client-Server System for Ubiquitous Video Service

Directory of Open Access Journals (Sweden)

Ronit Nossenson

2012-12-01

Full Text Available In this work we introduce a simple client-server system architecture and algorithms for ubiquitous live video and VOD service support. The main features of the system are: efficient usage of network resources, emphasis on user personalization, and ease of implementation. The system supports many continuous service requirements such as QoS provision, user mobility between networks and between different communication devices, and simultaneous usage of a device by a number of users.

Solid waste information and tracking system server conversion project management plan

International Nuclear Information System (INIS)

MAY, D.L.

1999-01-01

The Project Management Plan governing the conversion of Solid Waste Information and Tracking System (SWITS) to a client-server architecture. The Solid Waste Information and Tracking System Project Management Plan (PMP) describes the background, planning and management of the SWITS conversion. Requirements and specification documentation needed for the SWITS conversion will be released as supporting documents

Worldwide telemedicine services based on distributed multimedia electronic patient records by using the second generation Web server hyperwave.

Science.gov (United States)

Quade, G; Novotny, J; Burde, B; May, F; Beck, L E; Goldschmidt, A

1999-01-01

A distributed multimedia electronic patient record (EPR) is a central component of a medicine-telematics application that supports physicians working in rural areas of South America, and offers medical services to scientists in Antarctica. A Hyperwave server is used to maintain the patient record. As opposed to common web servers--and as a second generation web server--Hyperwave provides the capability of holding documents in a distributed web space without the problem of broken links. This enables physicians to browse through a patient's record by using a standard browser even if the patient's record is distributed over several servers. The patient record is basically implemented on the "Good European Health Record" (GEHR) architecture.

OPC Server and BridgeView Application for High Voltage Power Supply Lecroy 1458

CERN Document Server

Swoboda, D; CERN. Geneva

2000-01-01

Abstract The aim of this project was to develop an OPC server to communicate over an RS232 serial line. This communication media is commonly used with commercial instruments. The development was made for a High Voltage power supply in the context of the Alice [1] experiment. In addition, the structured modular concept will allow changing the transmission media or power supply type with little effort. The high voltage power supply should be accessible remotely through a network. OPC[2] is an acronym for OLE[3] for Process Control. OPC is based on the DCOM [3] communication protocol, which allows communication with any computer running a Windows based OS. This standard is widely used in industry to access device data through Windows applications. The concept is based on the client-server architecture. The hardware and the software architecture are described. Subsequently details of the implemented programs are given with emphasis on the possibility to replace parts of the software in order to use differ...

Minimizing SIP Session Re-Setup Delay over Wireless Link in 3G Handover Scenarios

Directory of Open Access Journals (Sweden)

Moon Bongkyo

2010-01-01

Full Text Available The delay in transmitting SIP messages over the wireless link for session resetup at handover is still major bottleneck for interactive multimedia service. In this paper, a proxy agent-based scheme is proposed to minimize the SIP session setup delay over a wireless link in 3G inter-subnet handover scenarios. This scheme is based on the two characteristics. One is that the major factor of SIP session re-setup delay is generally caused by the retransmissions in the unreliable wireless links, and the other is that most of the fields in request messages as well as response messages are duplicated when a set of SIP messages are exchanged during session re-setup procedure. In this scheme, no change is required in the SIP message processing except for the proxy agents in both BS and MH.

Patterns and Practices for Future Architectures

Science.gov (United States)

2014-08-01

Proposed Graph Analytics (right) Library Architectures 30 Figure 21: SGI UV 100 (CPU-Only) Configuration 33 Figure 22: SGI C2108 2U Server with Two...the CombBLAS library [Buluç 2011, 2014]. Figure 20: Comparison of Linear Algebra (left) and the Proposed Graph Analytics (right) Library ... Architectures The libraries (shaded) provide an interface/abstraction layer between the hardware and application layers. Within the library design is an

76 FR 28437 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Initial...

Science.gov (United States)

2011-05-17

... Preventive Services for Older Adults SIP11-045, and Measuring Impact of Multi-Component Interventions to Prevent Older Adult Falls and Assessing Sustainability and Scalability, SIP 11-046, Panel D,'' initial... SIP11-045, and Measuring Impact of Multi- Component Interventions to Prevent Older Adult Falls and...

Analysis of Java Distributed Architectures in Designing and Implementing a Client/Server Database System

National Research Council Canada - National Science Library

Akin, Ramis

1998-01-01

.... Information is scattered throughout organizations and must be easily accessible. A new solution is needed for effective and efficient management of data in today's distributed client/server environment...

The D3 Middleware Architecture

Science.gov (United States)

Walton, Joan; Filman, Robert E.; Korsmeyer, David J.; Lee, Diana D.; Mak, Ron; Patel, Tarang

2002-01-01

DARWIN is a NASA developed, Internet-based system for enabling aerospace researchers to securely and remotely access and collaborate on the analysis of aerospace vehicle design data, primarily the results of wind-tunnel testing and numeric (e.g., computational fluid-dynamics) model executions. DARWIN captures, stores and indexes data; manages derived knowledge (such as visualizations across multiple datasets); and provides an environment for designers to collaborate in the analysis of test results. DARWIN is an interesting application because it supports high-volumes of data. integrates multiple modalities of data display (e.g., images and data visualizations), and provides non-trivial access control mechanisms. DARWIN enables collaboration by allowing not only sharing visualizations of data, but also commentary about and views of data. Here we provide an overview of the architecture of D3, the third generation of DARWIN. Earlier versions of DARWIN were characterized by browser-based interfaces and a hodge-podge of server technologies: CGI scripts, applets, PERL, and so forth. But browsers proved difficult to control, and a proliferation of computational mechanisms proved inefficient and difficult to maintain. D3 substitutes a pure-Java approach for that medley: A Java client communicates (though RMI over HTTPS) with a Java-based application server. Code on the server accesses information from JDBC databases, distributed LDAP security services, and a collaborative information system. D3 is a three tier-architecture, but unlike 'E-commerce' applications, the data usage pattern suggests different strategies than traditional Enterprise Java Beans - we need to move volumes of related data together, considerable processing happens on the client, and the 'business logic' on the server-side is primarily data integration and collaboration. With D3, we are extending DARWIN to handle other data domains and to be a distributed system, where a single login allows a user

A network architecture supporting consistent rich behavior in collaborative interactive applications.

Science.gov (United States)

Marsh, James; Glencross, Mashhuda; Pettifer, Steve; Hubbold, Roger

2006-01-01

Network architectures for collaborative virtual reality have traditionally been dominated by client-server and peer-to-peer approaches, with peer-to-peer strategies typically being favored where minimizing latency is a priority, and client-server where consistency is key. With increasingly sophisticated behavior models and the demand for better support for haptics, we argue that neither approach provides sufficient support for these scenarios and, thus, a hybrid architecture is required. We discuss the relative performance of different distribution strategies in the face of real network conditions and illustrate the problems they face. Finally, we present an architecture that successfully meets many of these challenges and demonstrate its use in a distributed virtual prototyping application which supports simultaneous collaboration for assembly, maintenance, and training applications utilizing haptics.

CacyBP/SIP binds ERK1/2 and affects transcriptional activity of Elk-1

International Nuclear Information System (INIS)

Kilanczyk, Ewa; Filipek, Slawomir; Jastrzebska, Beata; Filipek, Anna

2009-01-01

In this work we showed for the first time that mouse CacyBP/SIP interacts with extracellular signal regulated kinases 1 and 2 (ERK1/2). We also established that a calcium binding protein, S100A6, competes for this interaction. Moreover, the E217K mutant of CacyBP/SIP does not bind significantly to ERK1/2 although it retains the ability to interact with S100A6. Molecular modeling shows that the E217K mutation in the 189-219 CacyBP/SIP fragment markedly changes its electrostatic potential, suggesting that the binding with ERK1/2 might have an electrostatic character. We also demonstrate that CacyBP/SIP-ERK1/2 interaction inhibits phosphorylation of the Elk-1 transcription factor in vitro and in the nuclear fraction of NB2a cells. Altogether, our data suggest that the binding of CacyBP/SIP with ERK1/2 might regulate Elk-1 phosphorylation/transcriptional activity and that S100A6 might further modulate this effect via Ca 2+ -dependent interaction with CacyBP/SIP and competition with ERK1/2.

Spectral induced polarization (SIP) response of mine tailings.

Science.gov (United States)

Placencia-Gómez, Edmundo; Parviainen, Annika; Slater, Lee; Leveinen, Jussi

2015-02-01

Mine tailings impoundments are a source of leachates known as acid mine drainage (AMD) which can pose a contamination risk for surrounding surface and groundwater. Methodologies which can help management of this environmental issue are needed. We carried out a laboratory study of the spectral induced polarization (SIP) response of tailings from the Haveri Au-Cu mine, SW Finland. The primary objectives were, (1) to determine possible correlations between SIP parameters and textural properties associated with oxidative-weathering mechanisms, mineralogical composition and metallic content, and (2) to evaluate the effects of the pore water chemistry on SIP parameters associated with redox-inactive and redox-active electrolytes varying in molar concentration, conductivity and pH. The Haveri tailings exhibit well defined relaxation spectra between 100 and 10,000Hz. The relaxation magnitudes are governed by the in-situ oxidative-weathering conditions on sulphide mineral surfaces contained in the tailings, and decrease with the oxidation degree. The oxidation-driven textural variation in the tailings results in changes to the frequency peak of the phase angle, the imaginary conductivity and chargeability, when plotted versus the pore water conductivity. In contrast, the real and the formation electrical conductivity components show a single linear dependence on the pore water conductivity. The increase of the pore water conductivity (dominated by the increase of ions concentration in solution) along with a transition to acidic conditions shifts the polarization peak towards higher frequencies. These findings show the unique sensitivity of the SIP method to potentially discriminate AMD discharges from reactive oxidation zones in tailings, suggesting a significant advantage for monitoring threatened aquifers. Copyright © 2014 Elsevier B.V. All rights reserved.

GeoServer cookbook

CERN Document Server

Iacovella, Stefano

2014-01-01

This book is ideal for GIS experts, developers, and system administrators who have had a first glance at GeoServer and who are eager to explore all its features in order to configure professional map servers. Basic knowledge of GIS and GeoServer is required.

Simulation of Si:P spin-based quantum computer architecture

International Nuclear Information System (INIS)

Chang Yiachung; Fang Angbo

2008-01-01

We present realistic simulation for single and double phosphorous donors in a silicon-based quantum computer design by solving a valley-orbit coupled effective-mass equation for describing phosphorous donors in strained silicon quantum well (QW). Using a generalized unrestricted Hartree-Fock method, we solve the two-electron effective-mass equation with quantum well confinement and realistic gate potentials. The effects of QW width, gate voltages, donor separation, and donor position shift on the lowest singlet and triplet energies and their charge distributions for a neighboring donor pair in the quantum computer(QC) architecture are analyzed. The gate tunability are defined and evaluated for a typical QC design. Estimates are obtained for the duration of spin half-swap gate operation.

An end-to-end security auditing approach for service oriented architectures

NARCIS (Netherlands)

Azarmi, M.; Bhargava, B.; Angin, P.; Ranchal, R.; Ahmed, N.; Sinclair, A.; Linderman, M.; Ben Othmane, L.

2012-01-01

Service-Oriented Architecture (SOA) is becoming a major paradigm for distributed application development in the recent explosion of Internet services and cloud computing. However, SOA introduces new security challenges not present in the single-hop client-server architectures due to the involvement

A Two-Layered Mobility Architecture Using Fast Mobile IPv6 and Session Initiation Protocol

Directory of Open Access Journals (Sweden)

Nursimloo DeeyaS

2008-01-01

Full Text Available Abstract This paper proposes an integrated mobility scheme that combines the procedures of fast handover for Mobile IPv6 (FMIPv6 and session initiation protocol (SIP mobility for realtime communications. This integrated approach is based on the context of the applications utilized. Furthermore, to reduce system redundancies and signaling loads, several functionalities of FMIPv6 and SIP have been integrated to optimize the integrated mobility scheme. The proposed scheme aims at reducing the handover latency and packet loss for an ongoing realtime traffic. Using ns-2 simulation, we analyze the performance of the proposed integrated scheme and compare it with the existing protocols for a VoIP and for a video stream traffic. This mobility architecture achieves lower handover delay and less packet loss than using either FMIPv6 or SIP and hence presents a powerful handover mobility scheme for next generation IP-based wireless systems.

A Two-Layered Mobility Architecture Using Fast Mobile IPv6 and Session Initiation Protocol

Directory of Open Access Journals (Sweden)

Deeya S. Nursimloo

2007-12-01

Full Text Available This paper proposes an integrated mobility scheme that combines the procedures of fast handover for Mobile IPv6 (FMIPv6 and session initiation protocol (SIP mobility for realtime communications. This integrated approach is based on the context of the applications utilized. Furthermore, to reduce system redundancies and signaling loads, several functionalities of FMIPv6 and SIP have been integrated to optimize the integrated mobility scheme. The proposed scheme aims at reducing the handover latency and packet loss for an ongoing realtime traffic. Using ns-2 simulation, we analyze the performance of the proposed integrated scheme and compare it with the existing protocols for a VoIP and for a video stream traffic. This mobility architecture achieves lower handover delay and less packet loss than using either FMIPv6 or SIP and hence presents a powerful handover mobility scheme for next generation IP-based wireless systems.

'SIP', as a tool of 'Ukrytie' shelter transformation into an ecologically safe system

International Nuclear Information System (INIS)

Dzhadd, K.; Shmidt, D.

1999-01-01

The Shelter implementation plan (SIP) was used for realisation of 'Ukrytie' stabilization and for its transformation into an ecologically safe system SIP includes logic of needed actions and process of solution adaption during 'Ukrytie' transformation

The building blocks to the architecture of a cloud platform

CSIR Research Space (South Africa)

Mvelase, P

2015-07-01

Full Text Available Service (SaaS). The datacenter hardware and software is what is called the Cloud. When a Cloud is made available in a pay-as-you-go manner to the public, it is called a Public Cloud; the service being sold is Utility Computing. The term Private Cloud... to develop and deliver Software as a Service (SaaS). Examples of such frameworks include the following: • Different hardware architectures with different server sizes— from small, Intel-based servers to mid- or top-range servers and mainframes...

Beginning SQL Server Modeling Model-driven Application Development in SQL Server

CERN Document Server

Weller, Bart

2010-01-01

Get ready for model-driven application development with SQL Server Modeling! This book covers Microsoft's SQL Server Modeling (formerly known under the code name "Oslo") in detail and contains the information you need to be successful with designing and implementing workflow modeling. Beginning SQL Server Modeling will help you gain a comprehensive understanding of how to apply DSLs and other modeling components in the development of SQL Server implementations. Most importantly, after reading the book and working through the examples, you will have considerable experience using SQL M

Android application and REST server system for quasar spectrum presentation and analysis

Science.gov (United States)

Wasiewicz, P.; Pietralik, K.; Hryniewicz, K.

2017-08-01

This paper describes the implementation of a system consisting of a mobile application and RESTful architecture server intended for the analysis and presentation of quasars' spectrum. It also depicts the quasar's characteristics and significance to the scientific community, the source for acquiring astronomical objects' spectral data, used software solutions as well as presents the aspect of Cloud Computing and various possible deployment configurations.

Penetration tests in next generation networks

Science.gov (United States)

Rezac, Filip; Voznak, Miroslav

2012-06-01

SIP proxy server is without any doubts centerpiece of any SIP IP telephony infrastructure. It also often provides other services than those related to VoIP traffic. These softswitches are, however, very often become victims of attacks and threats coming from public networks. The paper deals with a system that we developed as an analysis and testing tool to verify if the target SIP server is adequately secured and protected against any real threats. The system is designed as an open-source application, thus allowing independent access and is fully extensible to other test modules.

An image-warping architecture for VR : low latency versus image quality

NARCIS (Netherlands)

Smit, F.A.; Liere, van R.; Beck, S.; Fröhlich, B.; Steed, A.; Reiners, D.; Lindeman, R.W.

2009-01-01

Designing low end-to-end latency system architectures for virtual reality is still an open and challenging problem. We describe the design, implementation and evaluation of a client-server depth-image warping architecture that updates and displays the scene graph at the refresh rate of the display.

An IMS testbed for SIP applications

DEFF Research Database (Denmark)

Caba, Cosmin Marius; Soler, José

2013-01-01

The paper presents the design and implementation of an emulation platform for the IP Multimedia Subsystem. The SIP Servlet API v1.1 has been used to implement the final system. The purpose of the emulation is to offer to IMS service developers an environment where they can integrate development...

Mobile object retrieval in server-based image databases

Science.gov (United States)

Manger, D.; Pagel, F.; Widak, H.

2013-05-01

The increasing number of mobile phones equipped with powerful cameras leads to huge collections of user-generated images. To utilize the information of the images on site, image retrieval systems are becoming more and more popular to search for similar objects in an own image database. As the computational performance and the memory capacity of mobile devices are constantly increasing, this search can often be performed on the device itself. This is feasible, for example, if the images are represented with global image features or if the search is done using EXIF or textual metadata. However, for larger image databases, if multiple users are meant to contribute to a growing image database or if powerful content-based image retrieval methods with local features are required, a server-based image retrieval backend is needed. In this work, we present a content-based image retrieval system with a client server architecture working with local features. On the server side, the scalability to large image databases is addressed with the popular bag-of-word model with state-of-the-art extensions. The client end of the system focuses on a lightweight user interface presenting the most similar images of the database highlighting the visual information which is common with the query image. Additionally, new images can be added to the database making it a powerful and interactive tool for mobile contentbased image retrieval.

Frame of reference of software architecture for web applications and mobile

Directory of Open Access Journals (Sweden)

Carlos Alberto Maliza Martinez

2016-08-01

Full Text Available Given the need to have a guide for the implementation of informatics applications, and thus achieve automate tasks improving response times of users, designed the framework of reference the architecture software for web and mobile applications with technology free software and open source. The technology to be used is the Object Oriented Programming (OOP with JAVA programming language, a client / server architecture and style of multitier architecture, which will allow us to create scalable, robust and stable systems, together of Java Platform Enterprise Edition (JEE that helps us to implement business applications thanks to the JPA and EJB APIs. By the server for handling transactions, security, scalability and concurrency we have Wildfly application server. And on the client side, for creating graphical interfaces we use the ExtJS and Sencha Touch Framework, which are lightweight, high-performance libraries based on HTML5, JavaScript and CSS3. The report generator is JasperReports, because it has the ability to deliver rich content display and printer. The database engine is MySQL, because its connectivity, speed, and security make it a very appropriate server for access from the web. Finally, as editor of web and mobile applications, we have the integrated development environment Eclipse IDE platform of open source. In this paper we make a critical analysis of such applications and formulate the Framework of Software Architecture for the development and implementation of Web and Mobile Applications, which were implemented in the ECU911 Babahoyo and at the Instituto Tecnologico Superior Babahoyo, proving through its application their effectiveness and efficiency in the implementation of integrated systems

Mastering Lync Server 2010

CERN Document Server

Winters, Nathan

2012-01-01

An in-depth guide on the leading Unified Communications platform Microsoft Lync Server 2010 maximizes communication capabilities in the workplace like no other Unified Communications (UC) solution. Written by experts who know Lync Server inside and out, this comprehensive guide shows you step by step how to administer the newest and most robust version of Lync Server. Along with clear and detailed instructions, learning is aided by exercise problems and real-world examples of established Lync Server environments. You'll gain the skills you need to effectively deploy Lync Server 2010 and be on

Pumping characteristics of sputter ion pump (SIP) and titanium sublimation pump (TSP) combination

International Nuclear Information System (INIS)

Ratnakala, K.C.; Patel, R.J.; Bhavsar, S.T.; Pandiyar, M.L.; Ramamurthi, S.S.

1995-01-01

For achieving hydrocarbon free, clean ultra high vacuum, SIP-TSP combination is one of the ideal choice for pumping. For the SRS facility in Centre for Advanced Technology (CAT), we are utilising this combination, enmass. For this purpose, two modules of these combination set-ups are assembled, one with the TSP as an integral part of SIP and the other, with TSP as a separate pump mounted on the top of SIP. The pump bodies were vacuum degassed at 700 degC at 10 -5 mbar for 3 hrs. An ultimate vacuum of 3 x 10 -11 mbar was achieved, after a bake-out at 250 degC for 4 hrs, followed by continuous SIP pumping for 48 hrs, with two TSP flashing at approximately 10 hrs interval. The pump-down patterns as well as the pressure-rise patterns are studied. (author). 2 refs., 5 figs

SMR-Based Adaptive Mobility Management Scheme in Hierarchical SIP Networks

Directory of Open Access Journals (Sweden)

KwangHee Choi

2014-10-01

Full Text Available In hierarchical SIP networks, paging is performed to reduce location update signaling cost for mobility management. However, the cost efficiency largely depends on each mobile node’s session-to-mobility-ratio (SMR, which is defined as a ratio of the session arrival rate to the movement rate. In this paper, we propose the adaptive mobility management scheme that can determine the policy regarding to each mobile node’s SMR. Each mobile node determines whether the paging is applied or not after comparing its SMR with the threshold. In other words, the paging is applied to a mobile node when a mobile node’s SMR is less than the threshold. Therefore, the proposed scheme provides a way to minimize signaling costs according to each mobile node’s SMR. We find out the optimal threshold through performance analysis, and show that the proposed scheme can reduce signaling cost than the existing SIP and paging schemes in hierarchical SIP networks.

Cryptanalysis and improvement of a biometrics-based authentication and key agreement scheme for multi-server environments.

Science.gov (United States)

Yang, Li; Zheng, Zhiming

2018-01-01

According to advancements in the wireless technologies, study of biometrics-based multi-server authenticated key agreement schemes has acquired a lot of momentum. Recently, Wang et al. presented a three-factor authentication protocol with key agreement and claimed that their scheme was resistant to several prominent attacks. Unfortunately, this paper indicates that their protocol is still vulnerable to the user impersonation attack, privileged insider attack and server spoofing attack. Furthermore, their protocol cannot provide the perfect forward secrecy. As a remedy of these aforementioned problems, we propose a biometrics-based authentication and key agreement scheme for multi-server environments. Compared with various related schemes, our protocol achieves the stronger security and provides more functionality properties. Besides, the proposed protocol shows the satisfactory performances in respect of storage requirement, communication overhead and computational cost. Thus, our protocol is suitable for expert systems and other multi-server architectures. Consequently, the proposed protocol is more appropriate in the distributed networks.

Cryptanalysis and improvement of a biometrics-based authentication and key agreement scheme for multi-server environments

Science.gov (United States)

Zheng, Zhiming

2018-01-01

According to advancements in the wireless technologies, study of biometrics-based multi-server authenticated key agreement schemes has acquired a lot of momentum. Recently, Wang et al. presented a three-factor authentication protocol with key agreement and claimed that their scheme was resistant to several prominent attacks. Unfortunately, this paper indicates that their protocol is still vulnerable to the user impersonation attack, privileged insider attack and server spoofing attack. Furthermore, their protocol cannot provide the perfect forward secrecy. As a remedy of these aforementioned problems, we propose a biometrics-based authentication and key agreement scheme for multi-server environments. Compared with various related schemes, our protocol achieves the stronger security and provides more functionality properties. Besides, the proposed protocol shows the satisfactory performances in respect of storage requirement, communication overhead and computational cost. Thus, our protocol is suitable for expert systems and other multi-server architectures. Consequently, the proposed protocol is more appropriate in the distributed networks. PMID:29534085

OVERVIEW OF POPULAR APPROACHES IN CREATING CLIENT-SERVER APPLICATIONS BASED ON SCIENTOMETRICS ONAFTS’ PLATFORM

Directory of Open Access Journals (Sweden)

D. Salskyi

2017-12-01

Full Text Available Most of the currently developed systems are based on the client-server architecture. This architecture is usedeverywhere, from mobile-native development to Web applications.However implementing an application based on this architectural solution requires quite a lot of effort from the softwaredeveloper, and therefore, in order to simplify and speed up the development, certain standard solutions and approachesappeared. This article will discuss the most popular technologies used in the development of Web applications in the context ofenterprise development.Also in this article will be mentioned the project, built on the architecture of "client-server" - ScienceToMetrics.The main theme of this project is the study of science-metric indicators for the structural divisions of the faculty of theOdessa National Academy of Food Technologies. In fact, it is a portal for viewing and editing information on employees, inthe future this portal may be extended to subprojects.In this project, the main idea of this architecture was embodied: decomposition of the application into atomic parts inorder to distribute it to several hardware units of capacity to improve performance. The client is an independent application,which at the same time receives information from an external API-interface through REST-requests. In turn, the backendprovides this API with certain security restrictions on the content provided. The backend for this architecture provides a layerfor the content of the data users, whether it's a database (NoSQL, SQL or an integration API with external aggregationsystems. To ensure the necessary level of security, JWT (Javascript Web Token authorization is used, which allows you not tocreate an explicit session between the client and the backend, but allows you to communicate through a token that stores allthe necessary meta-information for this user.

A price and performance comparison of three different storage architectures for data in cloud-based systems

Science.gov (United States)

Gallagher, J. H. R.; Jelenak, A.; Potter, N.; Fulker, D. W.; Habermann, T.

2017-12-01

Providing data services based on cloud computing technology that is equivalent to those developed for traditional computing and storage systems is critical for successful migration to cloud-based architectures for data production, scientific analysis and storage. OPeNDAP Web-service capabilities (comprising the Data Access Protocol (DAP) specification plus open-source software for realizing DAP in servers and clients) are among the most widely deployed means for achieving data-as-service functionality in the Earth sciences. OPeNDAP services are especially common in traditional data center environments where servers offer access to datasets stored in (very large) file systems, and a preponderance of the source data for these services is being stored in the Hierarchical Data Format Version 5 (HDF5). Three candidate architectures for serving NASA satellite Earth Science HDF5 data via Hyrax running on Amazon Web Services (AWS) were developed and their performance examined for a set of representative use cases. The performance was based both on runtime and incurred cost. The three architectures differ in how HDF5 files are stored in the Amazon Simple Storage Service (S3) and how the Hyrax server (as an EC2 instance) retrieves their data. The results for both the serial and parallel access to HDF5 data in the S3 will be presented. While the study focused on HDF5 data, OPeNDAP and the Hyrax data server, the architectures are generic and the analysis can be extrapolated to many different data formats, web APIs, and data servers.

PRISMA-MAR: An Architecture Model for Data Visualization in Augmented Reality Mobile Devices

Science.gov (United States)

Gomes Costa, Mauro Alexandre Folha; Serique Meiguins, Bianchi; Carneiro, Nikolas S.; Gonçalves Meiguins, Aruanda Simões

2013-01-01

This paper proposes an extension to mobile augmented reality (MAR) environments--the addition of data charts to the more usual text, image and video components. To this purpose, we have designed a client-server architecture including the main necessary modules and services to provide an Information Visualization MAR experience. The server side…

SIP-FS: a novel feature selection for data representation

Directory of Open Access Journals (Sweden)

Yiyou Guo

2018-02-01

Full Text Available Abstract Multiple features are widely used to characterize real-world datasets. It is desirable to select leading features with stability and interpretability from a set of distinct features for a comprehensive data description. However, most of existing feature selection methods focus on the predictability (e.g., prediction accuracy of selected results yet neglect stability. To obtain compact data representation, a novel feature selection method is proposed to improve stability, and interpretability without sacrificing predictability (SIP-FS. Instead of mutual information, generalized correlation is adopted in minimal redundancy maximal relevance to measure the relation between different feature types. Several feature types (each contains a certain number of features can then be selected and evaluated quantitatively to determine what types contribute to a specific class, thereby enhancing the so-called interpretability of features. Moreover, stability is introduced in the criterion of SIP-FS to obtain consistent results of ranking. We conduct experiments on three publicly available datasets using one-versus-all strategy to select class-specific features. The experiments illustrate that SIP-FS achieves significant performance improvements in terms of stability and interpretability with desirable prediction accuracy and indicates advantages over several state-of-the-art approaches.

Disk Storage Server

CERN Multimedia

This model was a disk storage server used in the Data Centre up until 2012. Each tray contains a hard disk drive (see the 5TB hard disk drive on the main disk display section - this actually fits into one of the trays). There are 16 trays in all per server. There are hundreds of these servers mounted on racks in the Data Centre, as can be seen.

Group-Server Queues

OpenAIRE

Li, Quan-Lin; Ma, Jing-Yu; Xie, Mingzhou; Xia, Li

2017-01-01

By analyzing energy-efficient management of data centers, this paper proposes and develops a class of interesting {\\it Group-Server Queues}, and establishes two representative group-server queues through loss networks and impatient customers, respectively. Furthermore, such two group-server queues are given model descriptions and necessary interpretation. Also, simple mathematical discussion is provided, and simulations are made to study the expected queue lengths, the expected sojourn times ...

Web server attack analyzer

OpenAIRE

Mižišin, Michal

2013-01-01

Web server attack analyzer - Abstract The goal of this work was to create prototype of analyzer of injection flaws attacks on web server. Proposed solution combines capabilities of web application firewall and web server log analyzer. Analysis is based on configurable signatures defined by regular expressions. This paper begins with summary of web attacks, followed by detection techniques analysis on web servers, description and justification of selected implementation. In the end are charact...

76 FR 33686 - Proposed Extension of Part 4 of the Commission's Rules Regarding Outage Reporting to...

Science.gov (United States)

2011-06-09

... failure of core routers, network servers, SIP proxy servers, Serving General Packet Radio Service (GPRS..., Exchange Point, core router, root name server, ISP-operated DNS server, or DHCP server) that it owns... Commission. ACTION: Notice of proposed rulemaking. SUMMARY: The purpose of this document is to seek comment...

Design and implementation of an enterprise information system utilizing a component based three-tier client/server database system

OpenAIRE

Akbay, Murat.; Lewis, Steven C.

1999-01-01

The Naval Security Group currently requires a modem architecture to merge existing command databases into a single Enterprise Information System through which each command may manipulate administrative data. There are numerous technologies available to build and implement such a system. Component- based architectures are extremely well-suited for creating scalable and flexible three-tier Client/Server systems because the data and business logic are encapsulated within objects, allowing them t...

Implementing Citrix XenServer Quickstarter

CERN Document Server

Ahmed, Gohar

2013-01-01

Implementing Citrix XenServer Quick Starter is a practical, hands-on guide that will help you get started with the Citrix XenServer Virtualization technology with easy-to-follow instructions.Implementing Citrix XenServer Quick Starter is for system administrators who have little to no information on virtualization and specifically Citrix XenServer Virtualization. If you're managing a lot of physical servers and are tired of installing, deploying, updating, and managing physical machines on a daily basis over and over again, then you should probably explore your option of XenServer Virtualizati

Web Server Embedded System

Directory of Open Access Journals (Sweden)

Adharul Muttaqin

2014-07-01

Full Text Available Abstrak Embedded sistem saat ini menjadi perhatian khusus pada teknologi komputer, beberapa sistem operasi linux dan web server yang beraneka ragam juga sudah dipersiapkan untuk mendukung sistem embedded, salah satu aplikasi yang dapat digunakan dalam operasi pada sistem embedded adalah web server. Pemilihan web server pada lingkungan embedded saat ini masih jarang dilakukan, oleh karena itu penelitian ini dilakukan dengan menitik beratkan pada dua buah aplikasi web server yang tergolong memiliki fitur utama yang menawarkan “keringanan” pada konsumsi CPU maupun memori seperti Light HTTPD dan Tiny HTTPD. Dengan menggunakan parameter thread (users, ramp-up periods, dan loop count pada stress test embedded system, penelitian ini menawarkan solusi web server manakah diantara Light HTTPD dan Tiny HTTPD yang memiliki kecocokan fitur dalam penggunaan embedded sistem menggunakan beagleboard ditinjau dari konsumsi CPU dan memori. Hasil penelitian menunjukkan bahwa dalam hal konsumsi CPU pada beagleboard embedded system lebih disarankan penggunaan Light HTTPD dibandingkan dengan tiny HTTPD dikarenakan terdapat perbedaan CPU load yang sangat signifikan antar kedua layanan web tersebut Kata kunci: embedded system, web server Abstract Embedded systems are currently of particular concern in computer technology, some of the linux operating system and web server variegated also prepared to support the embedded system, one of the applications that can be used in embedded systems are operating on the web server. Selection of embedded web server on the environment is still rarely done, therefore this study was conducted with a focus on two web application servers belonging to the main features that offer a "lightness" to the CPU and memory consumption as Light HTTPD and Tiny HTTPD. By using the parameters of the thread (users, ramp-up periods, and loop count on a stress test embedded systems, this study offers a solution of web server which between the Light

HTSSIP: An R package for analysis of high throughput sequencing data from nucleic acid stable isotope probing (SIP experiments.

Directory of Open Access Journals (Sweden)

Nicholas D Youngblut

Full Text Available Combining high throughput sequencing with stable isotope probing (HTS-SIP is a powerful method for mapping in situ metabolic processes to thousands of microbial taxa. However, accurately mapping metabolic processes to taxa is complex and challenging. Multiple HTS-SIP data analysis methods have been developed, including high-resolution stable isotope probing (HR-SIP, multi-window high-resolution stable isotope probing (MW-HR-SIP, quantitative stable isotope probing (qSIP, and ΔBD. Currently, there is no publicly available software designed specifically for analyzing HTS-SIP data. To address this shortfall, we have developed the HTSSIP R package, an open-source, cross-platform toolset for conducting HTS-SIP analyses in a straightforward and easily reproducible manner. The HTSSIP package, along with full documentation and examples, is available from CRAN at https://cran.r-project.org/web/packages/HTSSIP/index.html and Github at https://github.com/buckleylab/HTSSIP.

Professional SQL Server 2005 administration

CERN Document Server

Knight, Brian; Snyder, Wayne; Armand, Jean-Claude; LoForte, Ross; Ji, Haidong

2007-01-01

SQL Server 2005 is the largest leap forward for SQL Server since its inception. With this update comes new features that will challenge even the most experienced SQL Server DBAs. Written by a team of some of the best SQL Server experts in the industry, this comprehensive tutorial shows you how to navigate the vastly changed landscape of the SQL Server administration. Drawing on their own first-hand experiences to offer you best practices, unique tips and tricks, and useful workarounds, the authors help you handle even the most difficult SQL Server 2005 administration issues, including blockin

QlikView Server and Publisher

CERN Document Server

Redmond, Stephen

2014-01-01

This is a comprehensive guide with a step-by-step approach that enables you to host and manage servers using QlikView Server and QlikView Publisher.If you are a server administrator wanting to learn about how to deploy QlikView Server for server management,analysis and testing, and QlikView Publisher for publishing of business content then this is the perfect book for you. No prior experience with QlikView is expected.

SIP-ing the elixir of youth.

Science.gov (United States)

Mair, William; Steffen, Kristan K; Dillin, Andrew

2011-09-16

AMP-activated protein kinase (AMPK) is a conserved cellular fuel gauge previously implicated in aging. In this issue, Lu et al. (2011) describe how age-related deacetylation of Sip2, a subunit of the AMPK homolog in yeast, acts as a life span clock that can be wound backward or forward to modulate longevity. Copyright © 2011 Elsevier Inc. All rights reserved.

System Level Design of Reconfigurable Server Farms Using Elliptic Curve Cryptography Processor Engines

Directory of Open Access Journals (Sweden)

Sangook Moon

2014-01-01

Full Text Available As today’s hardware architecture becomes more and more complicated, it is getting harder to modify or improve the microarchitecture of a design in register transfer level (RTL. Consequently, traditional methods we have used to develop a design are not capable of coping with complex designs. In this paper, we suggest a way of designing complex digital logic circuits with a soft and advanced type of SystemVerilog at an electronic system level. We apply the concept of design-and-reuse with a high level of abstraction to implement elliptic curve crypto-processor server farms. With the concept of the superior level of abstraction to the RTL used with the traditional HDL design, we successfully achieved the soft implementation of the crypto-processor server farms as well as robust test bench code with trivial effort in the same simulation environment. Otherwise, it could have required error-prone Verilog simulations for the hardware IPs and other time-consuming jobs such as C/SystemC verification for the software, sacrificing more time and effort. In the design of the elliptic curve cryptography processor engine, we propose a 3X faster GF(2m serial multiplication architecture.

The Early Psychosis Screener (EPS): Quantitative validation against the SIPS using machine learning.

Science.gov (United States)

Brodey, B B; Girgis, R R; Favorov, O V; Addington, J; Perkins, D O; Bearden, C E; Woods, S W; Walker, E F; Cornblatt, B A; Brucato, G; Walsh, B; Elkin, K A; Brodey, I S

2018-01-18

Machine learning techniques were used to identify highly informative early psychosis self-report items and to validate an early psychosis screener (EPS) against the Structured Interview for Psychosis-risk Syndromes (SIPS). The Prodromal Questionnaire-Brief Version (PQ-B) and 148 additional items were administered to 229 individuals being screened with the SIPS at 7 North American Prodrome Longitudinal Study sites and at Columbia University. Fifty individuals were found to have SIPS scores of 0, 1, or 2, making them clinically low risk (CLR) controls; 144 were classified as clinically high risk (CHR) (SIPS 3-5) and 35 were found to have first episode psychosis (FEP) (SIPS 6). Spectral clustering analysis, performed on 124 of the items, yielded two cohesive item groups, the first mostly related to psychosis and mania, the second mostly related to depression, anxiety, and social and general work/school functioning. Items within each group were sorted according to their usefulness in distinguishing between CLR and CHR individuals using the Minimum Redundancy Maximum Relevance procedure. A receiver operating characteristic area under the curve (AUC) analysis indicated that maximal differentiation of CLR and CHR participants was achieved with a 26-item solution (AUC=0.899±0.001). The EPS-26 outperformed the PQ-B (AUC=0.834±0.001). For screening purposes, the self-report EPS-26 appeared to differentiate individuals who are either CLR or CHR approximately as well as the clinician-administered SIPS. The EPS-26 may prove useful as a self-report screener and may lead to a decrease in the duration of untreated psychosis. A validation of the EPS-26 against actual conversion is underway. Copyright © 2017 Elsevier B.V. All rights reserved.

SIP Shear Walls: Cyclic Performance of High-Aspect-Ratio Segments and Perforated Walls

Science.gov (United States)

Vladimir Kochkin; Douglas R. Rammer; Kevin Kauffman; Thomas Wiliamson; Robert J. Ross

2015-01-01

Increasing stringency of energy codes and the growing market demand for more energy efficient buildings gives structural insulated panel (SIP) construction an opportunity to increase its use in commercial and residential buildings. However, shear wall aspect ratio limitations and lack of knowledge on how to design SIPs with window and door openings are barriers to the...

Sipping machine control system new design to perform integrity of nuclear fuel test in Cofrentes power plant

Energy Technology Data Exchange (ETDEWEB)

Palomo, M., E-mail: mpalomo@iqn.upv.es [Departamento de Ingenieria Quimica y Nuclear. Universidad Politecnica de Valencia (Spain); Urrea, M., E-mail: Matias.urrea@iberdrola.es [C.N.Cofrentes - Iberdrola Generacion S.A., Cofrentes, Valencia (Spain); Curiel, M., E-mail: m.curiel@lainsa.com [LAINSA Grupo Dominguis, Valencia (Spain); Arnaldos, A., E-mail: a.arnaldos@titaniast.com [TITANIA Servicios Tecnologicos SL, Grupo Dominguis, Valencia (Spain)

2011-07-01

This paper we present is related to SIPPING machine control system new design to perform integrity of nuclear fuel test. This test is a non destructive technique used for evaluating the radiated nuclear fuel coating structural integrity. It is based on the radioactive emission detection of fission elements in the reactor cooling system, using the fuel inspection equipment (SIPPING). SIPPING equipment consists of one simultaneous test bell-shaped vessel of eight fuel elements, and another one for individual element test, a control workstation and some accessories (cables, thermocouples, hoses). SIPPING inspection is carried out by means of fuel element vessel. Through air injection, water flows around the element and heat evacuation is reduced, so fuel elements temperature increases. Those elements with faults shall expelled fission components dissolved in water and/or as a gas component. The project aim is the SIPPING system control design and software based on LabVIEW, for control, monitoring and documentation of the SIPPING Test. This project shall give a major functionality to the system and, at the same time, shall facilitate the user a friendlier and interactive environment allowing: to substitute the present work platform with a real-time electronic system based on cRIO and a control software ad-hoc designed for SIPPING system; to equip new system of a major redundancy for data storage, minimising loss probability of the same. (author)

PENGUKURAN KINERJA ROUND-ROBIN SCHEDULER UNTUK LINUX VIRTUAL SERVER PADA KASUS WEB SERVER

Directory of Open Access Journals (Sweden)

Royyana Muslim Ijtihadie

2005-07-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Dengan meningkatnya perkembangan jumlah pengguna internet dan mulai diadopsinya penggunaan internet dalam kehidupan sehari-hari, maka lalulintas data di Internet telah meningkat secara signifikan. Sejalan dengan itu pula beban kerja server-server yang memberikan service di Internet juga mengalami kenaikan yang cukup signifikan. Hal tersebut dapat mengakibatkan suatu server mengalami kelebihan beban pada suatu saat. Untuk mengatasi hal tersebut maka diterapkan skema konfigurasi server cluster menggunakan konsep load balancing. Load balancing server menerapkan algoritma dalam melakukan pembagian tugas. Algoritma round robin telah digunakan pada Linux Virtual Server. Penelitian ini melakukan pengukuran kinerja terhadap Linux Virtual Server yang menggunakan algoritma round robin untuk melakukan penjadwalan pembagian beban terhadap server. Penelitian ini mengukur performa dari sisi client yang mencoba mengakses web server.performa yang diukur adalah jumlah request yang bisa diselesaikan perdetik (request per second, waktu untuk menyelesaikan per satu request, dan   throughput yang dihasilkan. Dari hasil percobaan didapatkan bahwa penggunaan LVS bisa meningkatkan performa, yaitu menaikkan jumlah request per detik

Mastering Microsoft Exchange Server 2010

CERN Document Server

McBee, Jim

2010-01-01

A top-selling guide to Exchange Server-now fully updated for Exchange Server 2010. Keep your Microsoft messaging system up to date and protected with the very newest version, Exchange Server 2010, and this comprehensive guide. Whether you're upgrading from Exchange Server 2007 SP1 or earlier, installing for the first time, or migrating from another system, this step-by-step guide provides the hands-on instruction, practical application, and real-world advice you need.: Explains Microsoft Exchange Server 2010, the latest release of Microsoft's messaging system that protects against spam and vir

Optimal control of a server farm

NARCIS (Netherlands)

Adan, I.J.B.F.; Kulkarni, V.G.; Wijk, van A.C.C.

2013-01-01

We consider a server farm consisting of ample exponential servers, that serve a Poisson stream of arriving customers. Each server can be either busy, idle or off. An arriving customer will immediately occupy an idle server, if there is one, and otherwise, an off server will be turned on and start

NEOS Server 4.0 Administrative Guide

OpenAIRE

Dolan, Elizabeth D.

2001-01-01

The NEOS Server 4.0 provides a general Internet-based client/server as a link between users and software applications. The administrative guide covers the fundamental principals behind the operation of the NEOS Server, installation and trouble-shooting of the Server software, and implementation details of potential interest to a NEOS Server administrator. The guide also discusses making new software applications available through the Server, including areas of concern to remote solver adminis...

Calculation of fuel element temperature TRIGA 2000 reactor in sipping test tubes using CFD

International Nuclear Information System (INIS)

Sudjatmi KA

2013-01-01

It has been calculated the fuel element temperature in the sipping test of Bandung TRIGA 2000 reactor. The calculation needs to be done to ascertain that the fuel element temperatures are below or at the limit of the allowable temperature fuel elements during reactor operation. ensuring that the implementation of the test by using this device, the temperature is still within safety limits. The calculation is done by making a model sipping test tubes containing a fuel element surrounded by 9 fuel elements. according to the position sipping test tubes in the reactor core. by using Gambit. Dimensional model adapted to the dimensions of the tube and the fuel element in the reactor core of Bandung TRIGA 2000 reactor. Sipping test Operation for each fuel element performed for 30 minutes at 300 kW power. Calculations were performed using CFD software and as input adjusted parameters of TRIGA 2000 reactor. Simulations carried out on the operation of the 30, 60, 90, 120, 150, 180 and 210 minutes. The calculation result shows that the temperature of the fuel in tubes sipping test of 236.06 °C, while the temperature of the wall is 87.58 °C. The maximum temperature in the fuel center of TRIGA 2000 reactor in normal operation is 650 °C. and the boiling is not allowed in the reactor. So it can be concluded that the operation of the sipping test device are is very safe because the fuel center temperature is below the temperature limits the allowable fuel under normal operating conditions as well as the fuel element wall temperature is below the boiling temperature of water. (author)

The Social Interaction Phobia Scale: Continued support for the psychometric validity of the SIPS using clinical and non-clinical samples.

Science.gov (United States)

Menatti, Alison R; Weeks, Justin W; Carleton, R Nicholas; Morrison, Amanda S; Heimberg, Richard G; Hope, Debra A; Blanco, Carlos; Schneier, Franklin R; Liebowitz, Michael R

2015-05-01

The present study sought to extend findings supporting the psychometric validity of a promising measure of social anxiety (SA) symptoms, the Social Interaction Phobia Scale (SIPS; Carleton et al., 2009). Analyses were conducted using three samples: social anxiety disorder (SAD) patients, generalized anxiety disorder (GAD) patients, and healthy controls. SIPS scores of SAD patients demonstrated internal consistency and construct validity, and the previously demonstrated three-factor structure of the SIPS was replicated. Further, the SIPS total score uniquely predicted SA symptoms, and SIPS scores were significantly higher for SAD patients than GAD patients or controls. Two cut-off scores that discriminated SAD patients from GAD patients and from healthy controls were identified. The current study is the first to replicate the SIPS three-factor model in a large, treatment-seeking sample of SAD patients and establish a cut-off score discriminating SAD from GAD patients. Findings support the SIPS as a valid, SAD-specific assessment instrument. Copyright © 2015 Elsevier Ltd. All rights reserved.

Microsoft SQL Server 2012 bible

CERN Document Server

Jorgensen, Adam; LeBlanc, Patrick; Cherry, Denny; Nelson, Aaron

2012-01-01

Harness the powerful new SQL Server 2012 Microsoft SQL Server 2012 is the most significant update to this product since 2005, and it may change how database administrators and developers perform many aspects of their jobs. If you're a database administrator or developer, Microsoft SQL Server 2012 Bible teaches you everything you need to take full advantage of this major release. This detailed guide not only covers all the new features of SQL Server 2012, it also shows you step by step how to develop top-notch SQL Server databases and new data connections and keep your databases performing at p

Windows Home Server users guide

CERN Document Server

Edney, Andrew

2008-01-01

Windows Home Server brings the idea of centralized storage, backup and computer management out of the enterprise and into the home. Windows Home Server is built for people with multiple computers at home and helps to synchronize them, keep them updated, stream media between them, and back them up centrally. Built on a similar foundation as the Microsoft server operating products, it's essentially Small Business Server for the home.This book details how to install, configure, and use Windows Home Server and explains how to connect to and manage different clients such as Windows XP, Windows Vist

Linux Server Security

CERN Document Server

Bauer, Michael D

2005-01-01

Linux consistently appears high up in the list of popular Internet servers, whether it's for the Web, anonymous FTP, or general services such as DNS and delivering mail. But security is the foremost concern of anyone providing such a service. Any server experiences casual probe attempts dozens of time a day, and serious break-in attempts with some frequency as well. This highly regarded book, originally titled Building Secure Servers with Linux, combines practical advice with a firm knowledge of the technical tools needed to ensure security. The book focuses on the most common use of Linux--

Energy Efficiency and Renewable Energy in SIPs and TIPs

Science.gov (United States)

Tools and guides to encourage state, tribal and local agencies to consider incorporating Energy Efficiency (EE) and Renewable Energy (RE) policies and programs in their State and Tribal Implementation Plans (SIPs/TIPs).

76 FR 28437 - Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Initial...

Science.gov (United States)

2011-05-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Initial Review The meeting... Disease or Treated by Assisted Reproductive Technology, SIP11-048, Panel F,'' initial review In accordance...

JACoW SIP4C/C++ at CERN - Status and lessons learned

CERN Document Server

Jensen, Steen; Dworak, Andrzej; Gourber-Pace, Marine; Hoguin, Frederic; Lauener, Joel; Locci, Frank; Sigerud, Katarina; Sliwinski, Wojciech

2018-01-01

After 4 years of promoting the Software Improvement Process for C/C++ (SIP4C/C++) initiative at CERN, we describe the current status for tools and procedures along with how they have been integrated into our environment. Based on feedback from four project teams, we present reasons for and against their adoption. Finally, we show how SIP4C/C++ has improved development and delivery processes as well as the first-line support of delivered products.

Architecture-Based Reliability Analysis of Web Services

Science.gov (United States)

Rahmani, Cobra Mariam

2012-01-01

In a Service Oriented Architecture (SOA), the hierarchical complexity of Web Services (WS) and their interactions with the underlying Application Server (AS) create new challenges in providing a realistic estimate of WS performance and reliability. The current approaches often treat the entire WS environment as a black-box. Thus, the sensitivity…

Windows server cookbook for Windows server 2003 and Windows 2000

CERN Document Server

Allen, Robbie

2005-01-01

This practical reference guide offers hundreds of useful tasks for managing Windows 2000 and Windows Server 2003, Microsoft's latest server. These concise, on-the-job solutions to common problems are certain to save you many hours of time searching through Microsoft documentation. Topics include files, event logs, security, DHCP, DNS, backup/restore, and more

Learning SQL Server Reporting Services 2012

CERN Document Server

Krishnaswamy, Jayaram

2013-01-01

The book is packed with clear instructions and plenty of screenshots, providing all the support and guidance you will need as you begin to generate reports with SQL Server 2012 Reporting Services.This book is for those who are new to SQL Server Reporting Services 2012 and aspiring to create and deploy cutting edge reports. This book is for report developers, report authors, ad-hoc report authors and model developers, and Report Server and SharePoint Server Integrated Report Server administrators. Minimal knowledge of SQL Server is assumed and SharePoint experience would be helpful.

A Satellite Data-Driven, Client-Server Decision Support Application for Agricultural Water Resources Management

Science.gov (United States)

Johnson, Lee F.; Maneta, Marco P.; Kimball, John S.

2016-01-01

Water cycle extremes such as droughts and floods present a challenge for water managers and for policy makers responsible for the administration of water supplies in agricultural regions. In addition to the inherent uncertainties associated with forecasting extreme weather events, water planners need to anticipate water demands and water user behavior in a typical circumstances. This requires the use decision support systems capable of simulating agricultural water demand with the latest available data. Unfortunately, managers from local and regional agencies often use different datasets of variable quality, which complicates coordinated action. In previous work we have demonstrated novel methodologies to use satellite-based observational technologies, in conjunction with hydro-economic models and state of the art data assimilation methods, to enable robust regional assessment and prediction of drought impacts on agricultural production, water resources, and land allocation. These methods create an opportunity for new, cost-effective analysis tools to support policy and decision-making over large spatial extents. The methods can be driven with information from existing satellite-derived operational products, such as the Satellite Irrigation Management Support system (SIMS) operational over California, the Cropland Data Layer (CDL), and using a modified light-use efficiency algorithm to retrieve crop yield from the synergistic use of MODIS and Landsat imagery. Here we present an integration of this modeling framework in a client-server architecture based on the Hydra platform. Assimilation and processing of resource intensive remote sensing data, as well as hydrologic and other ancillary information occur on the server side. This information is processed and summarized as attributes in water demand nodes that are part of a vector description of the water distribution network. With this architecture, our decision support system becomes a light weight 'app' that

The challenge of making architecture in housing projects

DEFF Research Database (Denmark)

Eskemose Andersen, Jørgen; Andreasen, Jørgen

2013-01-01

For the architect is is a constant challeng to deliver architeture and not just buildings. In a foreign context and essential in the developing world housing the urban poor is more about shelter than architecture as such. However even under server economic constraints good design in housing can m...... make a difference. The international organisation Archtecture Sans Frontieres, Denmark has for years been operating in very poor contexts and still in some cases have succeeded to deliver decent and sustainable architecture....

Application architecture for .NET designing applications and services

CERN Document Server

Microsoft. Redmond

2003-01-01

Get expert architectural and design-level guidance for building distributed solutions with the Microsoft® .NET Framework-learning how to synthesize your knowledge of application development, servers, and infrastructure and business requirements. This guide assumes you are familiar with .NET component development and the basic principles of a layered distributed application design. It examines architectural issues and solution design for a range of project stakeholders-whether you build and design applications and services, recommend appropriate technologies and products for applications and s

SSWAP: A Simple Semantic Web Architecture and Protocol for semantic web services.

Science.gov (United States)

Gessler, Damian D G; Schiltz, Gary S; May, Greg D; Avraham, Shulamit; Town, Christopher D; Grant, David; Nelson, Rex T

2009-09-23

SSWAP (Simple Semantic Web Architecture and Protocol; pronounced "swap") is an architecture, protocol, and platform for using reasoning to semantically integrate heterogeneous disparate data and services on the web. SSWAP was developed as a hybrid semantic web services technology to overcome limitations found in both pure web service technologies and pure semantic web technologies. There are currently over 2400 resources published in SSWAP. Approximately two dozen are custom-written services for QTL (Quantitative Trait Loci) and mapping data for legumes and grasses (grains). The remaining are wrappers to Nucleic Acids Research Database and Web Server entries. As an architecture, SSWAP establishes how clients (users of data, services, and ontologies), providers (suppliers of data, services, and ontologies), and discovery servers (semantic search engines) interact to allow for the description, querying, discovery, invocation, and response of semantic web services. As a protocol, SSWAP provides the vocabulary and semantics to allow clients, providers, and discovery servers to engage in semantic web services. The protocol is based on the W3C-sanctioned first-order description logic language OWL DL. As an open source platform, a discovery server running at http://sswap.info (as in to "swap info") uses the description logic reasoner Pellet to integrate semantic resources. The platform hosts an interactive guide to the protocol at http://sswap.info/protocol.jsp, developer tools at http://sswap.info/developer.jsp, and a portal to third-party ontologies at http://sswapmeet.sswap.info (a "swap meet"). SSWAP addresses the three basic requirements of a semantic web services architecture (i.e., a common syntax, shared semantic, and semantic discovery) while addressing three technology limitations common in distributed service systems: i.e., i) the fatal mutability of traditional interfaces, ii) the rigidity and fragility of static subsumption hierarchies, and iii) the

Beginning Microsoft SQL Server 2012 Programming

CERN Document Server

Atkinson, Paul

2012-01-01

Get up to speed on the extensive changes to the newest release of Microsoft SQL Server The 2012 release of Microsoft SQL Server changes how you develop applications for SQL Server. With this comprehensive resource, SQL Server authority Robert Vieira presents the fundamentals of database design and SQL concepts, and then shows you how to apply these concepts using the updated SQL Server. Publishing time and date with the 2012 release, Beginning Microsoft SQL Server 2012 Programming begins with a quick overview of database design basics and the SQL query language and then quickly proceeds to sho

Secure thin client architecture for DICOM image analysis

Science.gov (United States)

Mogatala, Harsha V. R.; Gallet, Jacqueline

2005-04-01

This paper presents a concept of Secure Thin Client (STC) Architecture for Digital Imaging and Communications in Medicine (DICOM) image analysis over Internet. STC Architecture provides in-depth analysis and design of customized reports for DICOM images using drag-and-drop and data warehouse technology. Using a personal computer and a common set of browsing software, STC can be used for analyzing and reporting detailed patient information, type of examinations, date, Computer Tomography (CT) dose index, and other relevant information stored within the images header files as well as in the hospital databases. STC Architecture is three-tier architecture. The First-Tier consists of drag-and-drop web based interface and web server, which provides customized analysis and reporting ability to the users. The Second-Tier consists of an online analytical processing (OLAP) server and database system, which serves fast, real-time, aggregated multi-dimensional data using OLAP technology. The Third-Tier consists of a smart algorithm based software program which extracts DICOM tags from CT images in this particular application, irrespective of CT vendor's, and transfers these tags into a secure database system. This architecture provides Winnipeg Regional Health Authorities (WRHA) with quality indicators for CT examinations in the hospitals. It also provides health care professionals with analytical tool to optimize radiation dose and image quality parameters. The information is provided to the user by way of a secure socket layer (SSL) and role based security criteria over Internet. Although this particular application has been developed for WRHA, this paper also discusses the effort to extend the Architecture to other hospitals in the region. Any DICOM tag from any imaging modality could be tracked with this software.

Scilab and SIP for Image Processing

OpenAIRE

Fabbri, Ricardo; Bruno, Odemir Martinez; Costa, Luciano da Fontoura

2012-01-01

This paper is an overview of Image Processing and Analysis using Scilab, a free prototyping environment for numerical calculations similar to Matlab. We demonstrate the capabilities of SIP -- the Scilab Image Processing Toolbox -- which extends Scilab with many functions to read and write images in over 100 major file formats, including PNG, JPEG, BMP, and TIFF. It also provides routines for image filtering, edge detection, blurring, segmentation, shape analysis, and image recognition. Basic ...

The ASDEX Upgrade Parameter Server

Energy Technology Data Exchange (ETDEWEB)

Neu, Gregor, E-mail: gregor.neu@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Cole, Richard [Unlimited Computer Systems, Seeshaupter Str. 15, 82393 Iffeldorf (Germany); Gräter, Alex [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Lüddecke, Klaus [Unlimited Computer Systems, Seeshaupter Str. 15, 82393 Iffeldorf (Germany); Rapson, Christopher J.; Raupp, Gerhard; Treutterer, Wolfgang; Zasche, Dietrich; Zehetbauer, Thomas [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany)

2015-10-15

Highlights: • We describe our main tool in the plasma control configuration process. • Parameter access and computation are configurable with XML files. • Simple implementation of in situ tests by rerouting requests to test data. • Pulse specific overriding of parameters. - Abstract: Concepts for the configuration of plant systems and plasma control of modern devices such as ITER and W7-X are based on global data structures, or “pulse schedules” or “experiment programs”, which specify all physics characteristics (waveforms for controlled actuators and plasma quantities) and all technical characteristics of the plant systems (diagnostics and actuators operation settings) for a planned pulse. At ASDEX Upgrade we use different approach. We observed that the physics characteristics driving the discharge control system (DCS) are frequently modified on a pulse-to-pulse basis. Plant system operation, however, relies on technical standard settings, or “basic configurations” to provide guaranteed resources or services, which evolve according to longer term session or campaign operation schedules. This is why AUG manages technical configuration items separately from physics items. Consistent computation of the DCS configuration requires access to all this physics and technical data, which include the discharge programme (DP), settings of actuator systems and real-time diagnostics, the current system state and a database of static parameters. A Parameter Server provides a unified view on all these parameter sets and acts as the central point of access. We describe the functionality and architecture of the Parameter Server and its embedding into the control environment.

A new technique to modify hypereutectic Al-24%Si alloys by a Si-P master alloy

Energy Technology Data Exchange (ETDEWEB)

Wu Yaping; Wang Shujun; Li Hui [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, 73 Jingshi Road, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, 73 Jingshi Road, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn

2009-05-27

The modification effect of a Si-P master alloy on Al-24%Si alloy was investigated by using electron probe micro-analyzer (EPMA) and optical microscopy (OM). The dissolution problem of the Si-P master alloys was solved by changing the sequence of addition. When the Si-P master alloy was added into Al melt before the addition of silicon, the best modification effect could be achieved. The modification parameters of the master alloy on Al-24%Si alloy were optimized through designing and analyzing the orthogonal experiment, and their influences on the modification effect were discussed. The results show that the influence of temperature on the modification effect is the greatest, followed by the addition level, and the holding time is the least. The optimized modification parameters are the modification temperature of 810 deg. C, the addition level of 0.35 wt.%, the holding time of 30 min + 50 min whose meaning is that the Si-P master alloy is added firstly to the molten Al, and silicon is added 30 min later, then holding another 50 min. In addition, the modification mechanism of the Si-P master alloy on Al-24%Si alloy was also discussed.

Louisiana SIP: LAC 33:III Ch 2147. Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 2011-08-04 (LAd34) to 2017-09-27

Science.gov (United States)

Louisiana SIP: LAC 33:III Ch 2147. Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 2011-08-04 (LAd34) to 2017-09-27

77 FR 31358 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Initial...

Science.gov (United States)

2012-05-25

... announced below concerns Research to Enhance Community- Based Fall Prevention among Older Adults, SIP12-058, and Developing a Compendium of Measures and Questions to Assess Mobility: A Focus on Older Adult... Older Adults, SIP12-058, and Developing a Compendium of Measures and Questions to Assess Mobility: A...

SPEER-SERVER: a web server for prediction of protein specificity determining sites.

Science.gov (United States)

Chakraborty, Abhijit; Mandloi, Sapan; Lanczycki, Christopher J; Panchenko, Anna R; Chakrabarti, Saikat

2012-07-01

Sites that show specific conservation patterns within subsets of proteins in a protein family are likely to be involved in the development of functional specificity. These sites, generally termed specificity determining sites (SDS), might play a crucial role in binding to a specific substrate or proteins. Identification of SDS through experimental techniques is a slow, difficult and tedious job. Hence, it is very important to develop efficient computational methods that can more expediently identify SDS. Herein, we present Specificity prediction using amino acids' Properties, Entropy and Evolution Rate (SPEER)-SERVER, a web server that predicts SDS by analyzing quantitative measures of the conservation patterns of protein sites based on their physico-chemical properties and the heterogeneity of evolutionary changes between and within the protein subfamilies. This web server provides an improved representation of results, adds useful input and output options and integrates a wide range of analysis and data visualization tools when compared with the original standalone version of the SPEER algorithm. Extensive benchmarking finds that SPEER-SERVER exhibits sensitivity and precision performance that, on average, meets or exceeds that of other currently available methods. SPEER-SERVER is available at http://www.hpppi.iicb.res.in/ss/.

Study on the essential variables for pipe outer surface irradiated laser stress improvement process (L-SIP). Development of pipe outer surface irradiated laser stress improvement process (L-SIP)

International Nuclear Information System (INIS)

Ohta, Takahiro; Kamo, Kazuhiko; Muroya, Itaru; Asada, Seiji; Nakamura, Yasuo

2009-01-01

The new process called L-SIP (outer surface irradiated Laser Stress Improvement Process) is developed to improve the tensile residual stress of the inner surface near the butt welded joints of pipes in the compression stress. The temperature gradient occurs in the thickness of pipes in heating the outer surface rapidly by laser beam. By the thermal expansion difference between the inner surface and the outer surface, the compression stress occurs near the inner surface of pipes. In this paper, the essential variables for L-SIP is studied by experimental and FEM analysis. The range of the essential variables for L-SIP, which are defined by thermo-elastic FEM analysis, are Tmax=550 - 650degC, L Q /√rh ≥ 3, W Q /√rh ≥ 1.7, and, 0.04 ≤ F 0 ≤ 0.10 where Tmax is maximum temperature on the monitor point of the outer surface, F 0 is k x τ 0 /h 2 , k is thermal diffusivity coefficient, τ 0 is the temperature rise time from 100degC to maximum temperature on the monitor point of the outer surface, W Q is τ 0 x v, υ is moving velocity, L Q is the uniform temperature length in the axial direction, h is thickness of the pipe, and r is average radius of the pipe. It is showed by thermo-elastic-plastic FEM analysis that the residual stresses near the inner surface of pipes are improved in 4 different size pipes under the same essential variables. L-SIP is actually applied to welding joints of 4B x Sch160 and 2B x Sch80 SUS304 type stainless steel pipes within the defined range of the essential variables. The measured welding residual stresses on the inner surface near the welding joints are tensile. The residual stresses on the inner surface change to compression in all joints by L-SIP. (author)

Mastering Microsoft Exchange Server 2013

CERN Document Server

Elfassy, David

2013-01-01

The bestselling guide to Exchange Server, fully updated for the newest version Microsoft Exchange Server 2013 is touted as a solution for lowering the total cost of ownership, whether deployed on-premises or in the cloud. Like the earlier editions, this comprehensive guide covers every aspect of installing, configuring, and managing this multifaceted collaboration system. It offers Windows systems administrators and consultants a complete tutorial and reference, ideal for anyone installing Exchange Server for the first time or those migrating from an earlier Exchange Server version.Microsoft

Generation of a gene cassette for genetically engineered Salmonella Enteritidis in the specific region of the sipC gene

Directory of Open Access Journals (Sweden)

M Ghasemi

2017-05-01

Full Text Available Introduction: Salmonellosis is an infection caused by eating contaminated food with Salmonella, and it can occur in humans and other animals. Salmonella has acquired the ability to create the infection due to the presence of several virulence genes. One of the virulence genes of salmonella is sipC gene that coding the SipC protein. The aim of this study was creating the gene cassette to genetically engineered Salmonella enteritidis in the specific region of the sipC gene. Methods: In this study, after DNA extraction from Salmonella, the upstream and downstream regions of the sipC gene was amplified based on PCR method. The PCR products were cloned with T/A cloning method and they were inserted into the pGEM vector. In order to generate the final gene cassette, each of the upstream and downstream regions of the sipC gene was subcloned into the pET32 vector, and cloning accuracy was assessed by PCR and enzyme digestion methods. Results: Amplification of the 320 bp upstream and 206 bp downstream of sipC gene was successful by PCR method. T/A cloning of these fragments were caused the formation of two pGEM-up and pGEM-down recombinant vectors. Results that were confirmed the sub-cloning accuracy indicate the formation of the final pET32-up-down gene cassette. Conclusion: The generated gene cassette in this study was considered as a multi-purpose cassette that is able to specific gene manipulation of Salmonella sipC gene by homologous recombination matched. This gene cassette has the necessary potential for sipC gene deletion or insertion of any useful gene instead of sipC gene.

Initial validation of ATLAS software on the ARM architecture

Energy Technology Data Exchange (ETDEWEB)

Kawamura, Gen; Quadt, Arnulf; Smith, Joshua Wyatt [II. Physikalisches Institut, Georg-August Universitaet Goettingen (Germany); Seuster, Rolf [TRIUMF (Canada); Stewart, Graeme [University of Glasgow (United Kingdom)

2016-07-01

In the early 2000's the introduction of the multi-core era of computing helped industry and experiments such as ATLAS realize even more computing power. This was necessary as the limits of what a single-core processor could do where quickly being reached. Our current model of computing is to increase the number of multi-core nodes in a server farm in order to handle the increased influx of data. As power costs and our need for more computing power increase, this model will eventually become non-realistic. Once again a paradigm shift has to take place. One such option is to look at alternative architectures for large scale server farms. ARM processors are such an example. Making up approximately 95 % of the smartphone and tablet market these processors are widely available, very power conservative and constantly becoming faster. The ATLAS software code base (Athena) is extremely complex comprising of more than 6.5 million lines of code. It has very recently been ported to the ARM 64-bit architecture. The process of our port as well as the first validation plots are presented and compared to the traditional x86 architecture.

Remote Sensing Data Analytics for Planetary Science with PlanetServer/EarthServer

Science.gov (United States)

Rossi, Angelo Pio; Figuera, Ramiro Marco; Flahaut, Jessica; Martinot, Melissa; Misev, Dimitar; Baumann, Peter; Pham Huu, Bang; Besse, Sebastien

2016-04-01

Planetary Science datasets, beyond the change in the last two decades from physical volumes to internet-accessible archives, still face the problem of large-scale processing and analytics (e.g. Rossi et al., 2014, Gaddis and Hare, 2015). PlanetServer, the Planetary Science Data Service of the EC-funded EarthServer-2 project (#654367) tackles the planetary Big Data analytics problem with an array database approach (Baumann et al., 2014). It is developed to serve a large amount of calibrated, map-projected planetary data online, mainly through Open Geospatial Consortium (OGC) Web Coverage Processing Service (WCPS) (e.g. Rossi et al., 2014; Oosthoek et al., 2013; Cantini et al., 2014). The focus of the H2020 evolution of PlanetServer is still on complex multidimensional data, particularly hyperspectral imaging and topographic cubes and imagery. In addition to hyperspectral and topographic from Mars (Rossi et al., 2014), the use of WCPS is applied to diverse datasets on the Moon, as well as Mercury. Other Solar System Bodies are going to be progressively available. Derived parameters such as summary products and indices can be produced through WCPS queries, as well as derived imagery colour combination products, dynamically generated and accessed also through OGC Web Coverage Service (WCS). Scientific questions translated into queries can be posed to a large number of individual coverages (data products), locally, regionally or globally. The new PlanetServer system uses the the Open Source Nasa WorldWind (e.g. Hogan, 2011) virtual globe as visualisation engine, and the array database Rasdaman Community Edition as core server component. Analytical tools and client components of relevance for multiple communities and disciplines are shared across service such as the Earth Observation and Marine Data Services of EarthServer. The Planetary Science Data Service of EarthServer is accessible on http://planetserver.eu. All its code base is going to be available on GitHub, on

A RAD approach to client/server system development

International Nuclear Information System (INIS)

Brule, M.; Fair, W.; Jiang, J.; Sanvido, R.

1995-01-01

The capability, richness, and leverage of inexpensive commercial operating systems, off-the-shelf applications, and powerful developing tools have made building feature-rich client/server systems possible in rapid time and at low cost--ushering in a new level of systems integration not before possible. The authors achieve rapid application development (RAD) by using a flexible and extendible client/service integration framework. The framework provides the means to integrate in-house and third-party software applications with databases and expert-system knowledge bases and, where appropriate, provides communication links among the applications. The authors discuss the integration framework's capabilities, explain its underlying system architecture, and outline the methods and tools used to customize and integrate many diverse applications

Exam 70-411 administering Windows Server 2012

CERN Document Server

Course, Microsoft Official Academic

2014-01-01

Microsoft Windows Server is a multi-purpose server designed to increase reliability and flexibility of  a network infrastructure. Windows Server is the paramount tool used by enterprises in their datacenter and desktop strategy. The most recent versions of Windows Server also provide both server and client virtualization. Its ubiquity in the enterprise results in the need for networking professionals who know how to plan, design, implement, operate, and troubleshoot networks relying on Windows Server. Microsoft Learning is preparing the next round of its Windows Server Certification program

Sipping machine control system new design to perform integrity of nuclear fuel test in Cofrentes power plant

Energy Technology Data Exchange (ETDEWEB)

Curiel, M. [Logistica y Acondicionamientos Industriales SAU, Sorolla Center, local 10, Av. de las Cortes Valencianas No. 58, 46015 Valencia (Spain); Palomo, M. J. [ISIRYM, Universidad Politecnica de Valencia, Camino de Vera s/n, Valencia (Spain); Urrea, M. [Iberdrola Generacion S. A., Central Nuclear Cofrentes, Carretera Almansa Requena s/n, 04662 Cofrentes, Valencia (Spain); Vaquer, J., E-mail: m.curiel@lainsa.co [TITANIA Servicios Tecnologicos SL, Sorolla Center, local 10, Av. de las Cortes Valencianas No. 58, 46015 Valencia (Spain)

2010-10-15

This paper related to Sipping machine control system new design to perform integrity of nuclear fuel test. This test is a non destructive technique used for evaluating the radiated nuclear fuel coating structural integrity. It is based on the radioactive emission detection of fission elements in the reactor cooling system, using the fuel inspection equipment Sipping. The equipment consists of one simultaneous test bell-shaped vessel of eight fuel elements, and another one for individual element test, a control workstation and some accessories (cables, thermocouples, hoses). Sipping inspection is carried out by means of fuel element vessel. Through air injection, water flows around the element and heat evacuation is reduced, so fuel elements temperature increases. Those elements with faults shall expelled fission components dissolved in water and/or as a gas component. The project aim is the Sipping system control design and software based on LabVIEWTM, for control, monitoring and documentation of the Sipping test. This project shall give a major functionality to the system and, at the same time, shall facilitate the user a friendlier and interactive environment allowing: 1) To substitute the present work platform with a real-time electronic system based on cRIO and a control software ad-hoc designed for Sipping system. 2) To equip new system of a major redundancy for data storage, minimising loss probability of the same. (Author)

Towards a Standard Psychometric Diagnostic Interview for Subjects at Ultra High Risk of Psychosis: CAARMS versus SIPS

Science.gov (United States)

Fusar-Poli, P.; Cappucciati, M.; Rutigliano, G.; Lee, T. Y.; Beverly, Q.; Bonoldi, I.; Lelli, J.; Kaar, S. J.; Gago, E.; Rocchetti, M.; Patel, R.; Bhavsar, V.; Tognin, S.; Badger, S.; Calem, M.; Lim, K.; Kwon, J. S.; Perez, J.; McGuire, P.

2016-01-01

Background. Several psychometric instruments are available for the diagnostic interview of subjects at ultra high risk (UHR) of psychosis. Their diagnostic comparability is unknown. Methods. All referrals to the OASIS (London) or CAMEO (Cambridgeshire) UHR services from May 13 to Dec 14 were interviewed for a UHR state using both the CAARMS 12/2006 and the SIPS 5.0. Percent overall agreement, kappa, the McNemar-Bowker χ 2 test, equipercentile methods, and residual analyses were used to investigate diagnostic outcomes and symptoms severity or frequency. A conversion algorithm (CONVERT) was validated in an independent UHR sample from the Seoul Youth Clinic (Seoul). Results. There was overall substantial CAARMS-versus-SIPS agreement in the identification of UHR subjects (n = 212, percent overall agreement = 86%; kappa = 0.781, 95% CI from 0.684 to 0.878; McNemar-Bowker test = 0.069), with the exception of the brief limited intermittent psychotic symptoms (BLIPS) subgroup. Equipercentile-linking table linked symptoms severity and frequency across the CAARMS and SIPS. The conversion algorithm was validated in 93 UHR subjects, showing excellent diagnostic accuracy (CAARMS to SIPS: ROC area 0.929; SIPS to CAARMS: ROC area 0.903). Conclusions. This study provides initial comparability data between CAARMS and SIPS and will inform ongoing multicentre studies and clinical guidelines for the UHR psychometric diagnostic interview. PMID:27314005

Towards a Standard Psychometric Diagnostic Interview for Subjects at Ultra High Risk of Psychosis: CAARMS versus SIPS

Directory of Open Access Journals (Sweden)

P. Fusar-Poli

2016-01-01

Full Text Available Background. Several psychometric instruments are available for the diagnostic interview of subjects at ultra high risk (UHR of psychosis. Their diagnostic comparability is unknown. Methods. All referrals to the OASIS (London or CAMEO (Cambridgeshire UHR services from May 13 to Dec 14 were interviewed for a UHR state using both the CAARMS 12/2006 and the SIPS 5.0. Percent overall agreement, kappa, the McNemar-Bowker χ2 test, equipercentile methods, and residual analyses were used to investigate diagnostic outcomes and symptoms severity or frequency. A conversion algorithm (CONVERT was validated in an independent UHR sample from the Seoul Youth Clinic (Seoul. Results. There was overall substantial CAARMS-versus-SIPS agreement in the identification of UHR subjects (n=212, percent overall agreement = 86%; kappa = 0.781, 95% CI from 0.684 to 0.878; McNemar-Bowker test = 0.069, with the exception of the brief limited intermittent psychotic symptoms (BLIPS subgroup. Equipercentile-linking table linked symptoms severity and frequency across the CAARMS and SIPS. The conversion algorithm was validated in 93 UHR subjects, showing excellent diagnostic accuracy (CAARMS to SIPS: ROC area 0.929; SIPS to CAARMS: ROC area 0.903. Conclusions. This study provides initial comparability data between CAARMS and SIPS and will inform ongoing multicentre studies and clinical guidelines for the UHR psychometric diagnostic interview.

Sipping machine control system new design to perform integrity of nuclear fuel test in Cofrentes power plant

International Nuclear Information System (INIS)

Curiel, M.; Palomo, M. J.; Urrea, M.; Vaquer, J.

2010-10-01

This paper related to Sipping machine control system new design to perform integrity of nuclear fuel test. This test is a non destructive technique used for evaluating the radiated nuclear fuel coating structural integrity. It is based on the radioactive emission detection of fission elements in the reactor cooling system, using the fuel inspection equipment Sipping. The equipment consists of one simultaneous test bell-shaped vessel of eight fuel elements, and another one for individual element test, a control workstation and some accessories (cables, thermocouples, hoses). Sipping inspection is carried out by means of fuel element vessel. Through air injection, water flows around the element and heat evacuation is reduced, so fuel elements temperature increases. Those elements with faults shall expelled fission components dissolved in water and/or as a gas component. The project aim is the Sipping system control design and software based on LabVIEWTM, for control, monitoring and documentation of the Sipping test. This project shall give a major functionality to the system and, at the same time, shall facilitate the user a friendlier and interactive environment allowing: 1) To substitute the present work platform with a real-time electronic system based on cRIO and a control software ad-hoc designed for Sipping system. 2) To equip new system of a major redundancy for data storage, minimising loss probability of the same. (Author)

40 CFR 51.125 - Emissions reporting requirements for SIP revisions relating to budgets for SO2 and NOX emissions.

Science.gov (United States)

2010-07-01

... SIP revisions relating to budgets for SO2 and NOX emissions. 51.125 Section 51.125 Protection of... SIP revisions relating to budgets for SO2 and NOX emissions. (a) For its transport SIP revision under § 51.123 and/or 51.124, each State must submit to EPA SO2 and/or NOX emissions data as described in...

Louisiana SIP: LAC 33:III Ch 21 Subchap J, 2147--Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 1998-02-02 (LAc74) to more..

Science.gov (United States)

Louisiana SIP: LAC 33:III Ch 21 Subchap J, 2147--Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 1998-02-02 (LAc74) more...

VoIP attacks detection engine based on neural network

Science.gov (United States)

Safarik, Jakub; Slachta, Jiri

2015-05-01

The security is crucial for any system nowadays, especially communications. One of the most successful protocols in the field of communication over IP networks is Session Initiation Protocol. It is an open-source project used by different kinds of applications, both open-source and proprietary. High penetration and text-based principle made SIP number one target in IP telephony infrastructure, so security of SIP server is essential. To keep up with hackers and to detect potential malicious attacks, security administrator needs to monitor and evaluate SIP traffic in the network. But monitoring and following evaluation could easily overwhelm the security administrator in networks, typically in networks with a number of SIP servers, users and logically or geographically separated networks. The proposed solution lies in automatic attack detection systems. The article covers detection of VoIP attacks through a distributed network of nodes. Then the gathered data analyze aggregation server with artificial neural network. Artificial neural network means multilayer perceptron network trained with a set of collected attacks. Attack data could also be preprocessed and verified with a self-organizing map. The source data is detected by distributed network of detection nodes. Each node contains a honeypot application and traffic monitoring mechanism. Aggregation of data from each node creates an input for neural networks. The automatic classification on a centralized server with low false positive detection reduce the cost of attack detection resources. The detection system uses modular design for easy deployment in final infrastructure. The centralized server collects and process detected traffic. It also maintains all detection nodes.

Mac OS X Lion Server For Dummies

CERN Document Server

Rizzo, John

2011-01-01

The perfect guide to help administrators set up Apple's Mac OS X Lion Server With the overwhelming popularity of the iPhone and iPad, more Macs are appearing in corporate settings. The newest version of Mac Server is the ideal way to administer a Mac network. This friendly guide explains to both Windows and Mac administrators how to set up and configure the server, including services such as iCal Server, Podcast Producer, Wiki Server, Spotlight Server, iChat Server, File Sharing, Mail Services, and support for iPhone and iPad. It explains how to secure, administer, and troubleshoot the networ

Learning Zimbra Server essentials

CERN Document Server

Kouka, Abdelmonam

2013-01-01

A standard tutorial approach which will guide the readers on all of the intricacies of the Zimbra Server.If you are any kind of Zimbra user, this book will be useful for you, from newbies to experts who would like to learn how to setup a Zimbra server. If you are an IT administrator or consultant who is exploring the idea of adopting, or have already adopted Zimbra as your mail server, then this book is for you. No prior knowledge of Zimbra is required.

The small serine-threonine protein SIP2 interacts with STE12 and is involved in ascospore germination in Sordaria macrospora.

Science.gov (United States)

Elleuche, Skander; Bernhards, Yasmine; Schäfers, Christian; Varghese, Jans Manjali; Nolting, Nicole; Pöggeler, Stefanie

2010-12-01

In fungi, the homoeodomain protein STE12 controls diverse developmental processes, and derives its regulatory specificity from different protein interactions. We recently showed that in the homothallic ascomycete Sordaria macrospora, STE12 is essential for ascospore development, and is able to interact with the alpha-domain mating-type protein SMTA-1 and the MADS box protein MCM1. To further evaluate the functional roles of STE12, we used the yeast two-hybrid approach to identify new STE12-interacting partners. Using STE12 as bait, a small, serine-threonine-rich protein (designated STE12-interacting protein 2, SIP2) was identified. SIP2 is conserved among members of the fungal class Sordariomycetes. In vivo localization studies revealed that SIP2 was targeted to the nucleus and cytoplasm. The STE12/SIP2 interaction was further confirmed in vivo by bimolecular fluorescence complementation. Nuclear localization of SIP2 was apparently mediated by STE12. Unlike deletion of ste12, deletion of sip2 in S. macrospora led to only a slight decrease in ascospore germination, and no other obvious morphological phenotype. In comparison to the Δste12 single knockout strain, ascospore germination was significantly increased in a Δsip2/ste12 double knockout strain. Our data provide evidence for a regulatory role of the novel fungal protein SIP2 in ascospore germination. Copyright © 2010 Elsevier GmbH. All rights reserved.

Microsoft Windows Server Administration Essentials

CERN Document Server

Carpenter, Tom

2011-01-01

The core concepts and technologies you need to administer a Windows Server OS Administering a Windows operating system (OS) can be a difficult topic to grasp, particularly if you are new to the field of IT. This full-color resource serves as an approachable introduction to understanding how to install a server, the various roles of a server, and how server performance and maintenance impacts a network. With a special focus placed on the new Microsoft Technology Associate (MTA) certificate, the straightforward, easy-to-understand tone is ideal for anyone new to computer administration looking t

ORCAN-a web-based meta-server for real-time detection and functional annotation of orthologs.

Science.gov (United States)

Zielezinski, Andrzej; Dziubek, Michal; Sliski, Jan; Karlowski, Wojciech M

2017-04-15

ORCAN (ORtholog sCANner) is a web-based meta-server for one-click evolutionary and functional annotation of protein sequences. The server combines information from the most popular orthology-prediction resources, including four tools and four online databases. Functional annotation utilizes five additional comparisons between the query and identified homologs, including: sequence similarity, protein domain architectures, functional motifs, Gene Ontology term assignments and a list of associated articles. Furthermore, the server uses a plurality-based rating system to evaluate the orthology relationships and to rank the reference proteins by their evolutionary and functional relevance to the query. Using a dataset of ∼1 million true yeast orthologs as a sample reference set, we show that combining multiple orthology-prediction tools in ORCAN increases the sensitivity and precision by 1-2 percent points. The service is available for free at http://www.combio.pl/orcan/ . wmk@amu.edu.pl. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Multiple-Channel Security Architecture and its Implementation over SSL

Directory of Open Access Journals (Sweden)

Song Yong

2006-01-01

Full Text Available This paper presents multiple-channel SSL (MC-SSL, an architecture and protocol for protecting client-server communications. In contrast to SSL, which provides a single end-to-end secure channel, MC-SSL enables applications to employ multiple channels, each with its own cipher suite and data-flow direction. Our approach also allows for several partially trusted application proxies. The main advantages of MC-SSL over SSL are (a support for end-to-end security in the presence of partially trusted proxies, and (b selective data protection for achieving computational efficiency important to resource-constrained clients and heavily loaded servers.

GeoServer: il server geospaziale Open Source novità della nuova versione 2.3.0

Directory of Open Access Journals (Sweden)

Simone Giannecchini

2013-04-01

Full Text Available GeoServer è un server geospaziale Open Source sviluppato con tecnologia Java Enterprise per la gestione e l’editing di dati geospaziali secondo gli standard OGC e ISO Technical Committee 211. Esso fornisce le funzionalità di base per creareinfrastrutture spaziali di dati (SDI ed è progettato per essere interoperabile potendo pubblicare dati provenienti da ogni tipo di fonte spaziale utilizzando standard aperti.Open Source GeoSpatial server developed with Java Enterprise technology for managing, sharing and editing geospatial data according to the OGC and ISO TC 211 standards. GeoServer provides the basic functionalities to create spatial data infrastructures (SDI.GeoServer is designed for interoperability, it publishes data from any major spatial data source using open standards: it is the reference implementation of the Open Geospatial Consortium (OGC Web Feature Service (WFS and Web Coverage Service (WCS standards, as well as a highperformance certified compliant Web Map Service (WMS. GeoServer forms a core component of the Geospatial Web.

Empirical Testing of the CySeMoL Tool for Cyber Security Assessment – Case Study of Linux Server and MySQL

OpenAIRE

Rabbani, Talvia

2016-01-01

In this Master Thesis, several common applications used with MySQL and Linux server are modelled using the Enterprise Architecture Analysis Tool (EAAT) and the Cyber Security Modelling Language (CySeMoL), both developed by the Department of Industrial Information and Control System (ICS) at KTH. The objective of this study is to use the CySeMoL tool to evaluate the feasibility and correctness of the tool by simulating some particular type of attacks on a real life Linux server. A few common a...

Divergent Evolution of the Transcriptional Network Controlled by Snf1-Interacting Protein Sip4 in Budding Yeasts.

Directory of Open Access Journals (Sweden)

Constance Mehlgarten

Full Text Available Cellular responses to starvation are of ancient origin since nutrient limitation has always been a common challenge to the stability of living systems. Hence, signaling molecules involved in sensing or transducing information about limiting metabolites are highly conserved, whereas transcription factors and the genes they regulate have diverged. In eukaryotes the AMP-activated protein kinase (AMPK functions as a central regulator of cellular energy homeostasis. The yeast AMPK ortholog SNF1 controls the transcriptional network that counteracts carbon starvation conditions by regulating a set of transcription factors. Among those Cat8 and Sip4 have overlapping DNA-binding specificity for so-called carbon source responsive elements and induce target genes upon SNF1 activation. To analyze the evolution of the Cat8-Sip4 controlled transcriptional network we have compared the response to carbon limitation of Saccharomyces cerevisiae to that of Kluyveromyces lactis. In high glucose, S. cerevisiae displays tumor cell-like aerobic fermentation and repression of respiration (Crabtree-positive while K. lactis has a respiratory-fermentative life-style, respiration being regulated by oxygen availability (Crabtree-negative, which is typical for many yeasts and for differentiated higher cells. We demonstrate divergent evolution of the Cat8-Sip4 network and present evidence that a role of Sip4 in controlling anabolic metabolism has been lost in the Saccharomyces lineage. We find that in K. lactis, but not in S. cerevisiae, the Sip4 protein plays an essential role in C2 carbon assimilation including induction of the glyoxylate cycle and the carnitine shuttle genes. Induction of KlSIP4 gene expression by KlCat8 is essential under these growth conditions and a primary function of KlCat8. Both KlCat8 and KlSip4 are involved in the regulation of lactose metabolism in K. lactis. In chromatin-immunoprecipitation experiments we demonstrate binding of both, KlSip4 and

Professional Microsoft SQL Server 2012 Administration

CERN Document Server

Jorgensen, Adam; LoForte, Ross; Knight, Brian

2012-01-01

An essential how-to guide for experienced DBAs on the most significant product release since 2005! Microsoft SQL Server 2012 will have major changes throughout the SQL Server and will impact how DBAs administer the database. With this book, a team of well-known SQL Server experts introduces the many new features of the most recent version of SQL Server and deciphers how these changes will affect the methods that administrators have been using for years. Loaded with unique tips, tricks, and workarounds for handling the most difficult SQL Server admin issues, this how-to guide deciphers topics s

Study on the contract characteristics of Internet architecture

Science.gov (United States)

Fu, Chuan; Zhang, Guoqing; Yang, Jing; Liu, Xiaona

2011-11-01

The importance of Internet architecture goes beyond the technical aspects. The architecture of Internet has a profound influence on the Internet-based economy in term of how the profits are shared by different market participants (Internet Server Provider, Internet Content Provider), since it is the physical foundation upon which the profit-sharing contracts are derived. In order to facilitate the continuing growth of the Internet, it is necessary to systematically study factors that curtail the Internet-based economy including the existing Internet architecture. In this paper, we used transaction cost economics and contract economics as new tools to analyse the contracts derived from the current Internet architecture. This study sheds light on how the macro characteristics of Internet architecture effect the microeconomical decisions of market participants. Based on the existing Internet architecture, we discuss the possibility of promoting Internet-based economy by encouraging user to connect their private stub network to the Internet and giving the user more right of self-governing.

Service Oriented Architecture for High Level Applications

International Nuclear Information System (INIS)

Chu, P.

2012-01-01

Standalone high level applications often suffer from poor performance and reliability due to lengthy initialization, heavy computation and rapid graphical update. Service-oriented architecture (SOA) is trying to separate the initialization and computation from applications and to distribute such work to various service providers. Heavy computation such as beam tracking will be done periodically on a dedicated server and data will be available to client applications at all time. Industrial standard service architecture can help to improve the performance, reliability and maintainability of the service. Robustness will also be improved by reducing the complexity of individual client applications.

Architecture of a bi-directional Bluetooth-UPnP proxy

NARCIS (Netherlands)

Delphinanto, A.; Lukkien, J.J.; Koonen, A.M.J.; Hartog, F.T.H. den; Madureira, A.J.P.S.; Niemegeers, I.G.M.M.; Selgert, F.

2007-01-01

The current service- and device discovery protocols are not platform- and network independent Therefore, proxy servers will be needed to extend the range of IP-based discovery protocols to non-IP domains. We developed an architecture of a proxy that enables UPnP devices and services to be discovered

Louisiana SIP: LAC 33:III Ch 2132. Stage II Vapor Recovery Systems for Control of Vehicle Refuelling Emissions at Gasoline Dispensing Facilities; SIP effective 2011-08-04 (LAd34) and 2016-02-29 (LAd47) to 2017-09-27

Science.gov (United States)

Louisiana SIP: LAC 33:III Ch 2132. Stage II Vapor Recovery Systems for Control of Vehicle Refuelling Emissions at Gasoline Dispensing Facilities; SIP effective 2011-08-04 (LAd34) and 2016-02-29 (LAd47) to 2017-09-27

Essential Mac OS X panther server administration integrating Mac OS X server into heterogeneous networks

CERN Document Server

Bartosh, Michael

2004-01-01

If you've ever wondered how to safely manipulate Mac OS X Panther Server's many underlying configuration files or needed to explain AFP permission mapping--this book's for you. From the command line to Apple's graphical tools, the book provides insight into this powerful server software. Topics covered include installation, deployment, server management, web application services, data gathering, and more

A secure and efficiently searchable health information architecture.

Science.gov (United States)

Yasnoff, William A

2016-06-01

Patient-centric repositories of health records are an important component of health information infrastructure. However, patient information in a single repository is potentially vulnerable to loss of the entire dataset from a single unauthorized intrusion. A new health record storage architecture, the personal grid, eliminates this risk by separately storing and encrypting each person's record. The tradeoff for this improved security is that a personal grid repository must be sequentially searched since each record must be individually accessed and decrypted. To allow reasonable search times for large numbers of records, parallel processing with hundreds (or even thousands) of on-demand virtual servers (now available in cloud computing environments) is used. Estimated search times for a 10 million record personal grid using 500 servers vary from 7 to 33min depending on the complexity of the query. Since extremely rapid searching is not a critical requirement of health information infrastructure, the personal grid may provide a practical and useful alternative architecture that eliminates the large-scale security vulnerabilities of traditional databases by sacrificing unnecessary searching speed. Copyright © 2016 Elsevier Inc. All rights reserved.

CTserver: A Computational Thermodynamics Server for the Geoscience Community

Science.gov (United States)

Kress, V. C.; Ghiorso, M. S.

2006-12-01

The CTserver platform is an Internet-based computational resource that provides on-demand services in Computational Thermodynamics (CT) to a diverse geoscience user base. This NSF-supported resource can be accessed at ctserver.ofm-research.org. The CTserver infrastructure leverages a high-quality and rigorously tested software library of routines for computing equilibrium phase assemblages and for evaluating internally consistent thermodynamic properties of materials, e.g. mineral solid solutions and a variety of geological fluids, including magmas. Thermodynamic models are currently available for 167 phases. Recent additions include Duan, Møller and Weare's model for supercritical C-O-H-S, extended to include SO2 and S2 species, and an entirely new associated solution model for O-S-Fe-Ni sulfide liquids. This software library is accessed via the CORBA Internet protocol for client-server communication. CORBA provides a standardized, object-oriented, language and platform independent, fast, low-bandwidth interface to phase property modules running on the server cluster. Network transport, language translation and resource allocation are handled by the CORBA interface. Users access server functionality in two principal ways. Clients written as browser- based Java applets may be downloaded which provide specific functionality such as retrieval of thermodynamic properties of phases, computation of phase equilibria for systems of specified composition, or modeling the evolution of these systems along some particular reaction path. This level of user interaction requires minimal programming effort and is ideal for classroom use. A more universal and flexible mode of CTserver access involves making remote procedure calls from user programs directly to the server public interface. The CTserver infrastructure relieves the user of the burden of implementing and testing the often complex thermodynamic models of real liquids and solids. A pilot application of this distributed

Network characteristics for server selection in online games

Science.gov (United States)

Claypool, Mark

2008-01-01

Online gameplay is impacted by the network characteristics of players connected to the same server. Unfortunately, the network characteristics of online game servers are not well-understood, particularly for groups that wish to play together on the same server. As a step towards a remedy, this paper presents analysis of an extensive set of measurements of game servers on the Internet. Over the course of many months, actual Internet game servers were queried simultaneously by twenty-five emulated game clients, with both servers and clients spread out on the Internet. The data provides statistics on the uptime and populations of game servers over a month long period an an in-depth look at the suitability for game servers for multi-player server selection, concentrating on characteristics critical to playability--latency and fairness. Analysis finds most game servers have latencies suitable for third-person and omnipresent games, such as real-time strategy, sports and role-playing games, providing numerous server choices for game players. However, far fewer game servers have the low latencies required for first-person games, such as shooters or race games. In all cases, groups that wish to play together have a greatly reduced set of servers from which to choose because of inherent unfairness in server latencies and server selection is particularly limited as the group size increases. These results hold across different game types and even across different generations of games. The data should be useful for game developers and network researchers that seek to improve game server selection, whether for single or multiple players.

A Capacity Supply Model for Virtualized Servers

Directory of Open Access Journals (Sweden)

Alexander PINNOW

2009-01-01

Full Text Available This paper deals with determining the capacity supply for virtualized servers. First, a server is modeled as a queue based on a Markov chain. Then, the effect of server virtualization on the capacity supply will be analyzed with the distribution function of the server load.

Usage based indicators to assess the impact of scholarly works: architecture and method

Science.gov (United States)

Bollen, Johan [Santa Fe, NM; Van De Sompel, Herbert [Santa Fe, NM

2012-03-13

Although recording of usage data is common in scholarly information services, its exploitation for the creation of value-added services remains limited due to concerns regarding, among others, user privacy, data validity, and the lack of accepted standards for the representation, sharing and aggregation of usage data. A technical, standards-based architecture for sharing usage information is presented. In this architecture, OpenURL-compliant linking servers aggregate usage information of a specific user community as it navigates the distributed information environment that it has access to. This usage information is made OAI-PMH harvestable so that usage information exposed by many linking servers can be aggregated to facilitate the creation of value-added services with a reach beyond that of a single community or a single information service.

Server for experimental data from LHD

International Nuclear Information System (INIS)

Emoto, M.; Ohdachi, S.; Watanabe, K.; Sudo, S.; Nagayama, Y.

2006-01-01

In order to unify various types of data, the Kaiseki Server was developed. This server provides physical experimental data of large helical device (LHD) experiments. Many types of data acquisition systems currently exist in operation, and they produce files of various formats. Therefore, it has been difficult to analyze different types of acquisition data at the same time because the data of each system should be read in a particular manner. To facilitate the usage of this data by researchers, the authors have developed a new server system, which provides a unified data format and a unique data retrieval interface. Although the Kaiseki Server satisfied the initial demand, new requests arose from researchers, one of which was the remote usage of the server. The current system cannot be used remotely because of security issues. Another request was group ownership, i.e., users belonging to the same group should have equal access to data. To satisfy these demands, the authors modified the server. However, since other requests may arise in the future, the new system must be flexible so that it can satisfy future demands. Therefore, the authors decided to develop a new server using a three-tier structure

The Architecture and Administration of the ATLAS Online Computing System

CERN Document Server

Dobson, M; Ertorer, E; Garitaonandia, H; Leahu, L; Leahu, M; Malciu, I M; Panikashvili, E; Topurov, A; Ünel, G; Computing In High Energy and Nuclear Physics

2006-01-01

The needs of ATLAS experiment at the upcoming LHC accelerator, CERN, in terms of data transmission rates and processing power require a large cluster of computers (of the order of thousands) administrated and exploited in a coherent and optimal manner. Requirements like stability, robustness and fast recovery in case of failure impose a server-client system architecture with servers distributed in a tree like structure and clients booted from the network. For security reasons, the system should be accessible only through an application gateway and, also to ensure the autonomy of the system, the network services should be provided internally by dedicated machines in synchronization with CERN IT department's central services. The paper describes a small scale implementation of the system architecture that fits the given requirements and constraints. Emphasis will be put on the mechanisms and tools used to net boot the clients via the "Boot With Me" project and to synchronize information within the cluster via t...

Evolving towards better architectures for remote laboratories: a practical case

Directory of Open Access Journals (Sweden)

Pablo Orduña

2005-11-01

Full Text Available A WebLab is a remote laboratory controlled via Internet. Traditionally, the focus on WebLab design has been placed on the hardware side and the communication link between the controlling PC (WebLab server and the hardware prototype. Little attention has been paid to the other communication segment going from the WebLab server to the remote users’ PCs, since this has been regarded as a “solved software problem”. Consequently, aspects such as security, scalability, accessibility, or user friendliness have often been disregarded in WebLabs. This situation may be solved if a serious effort is placed on the definition of proper distributed software architectures for WebLabs. In this paper, we describe such ideal software architecture, resulted from an iterative process seeking a web-based, secure, scalable, multi-user, multi-device WebLab.

Windows Server 2012 R2 administrator cookbook

CERN Document Server

Krause, Jordan

2015-01-01

This book is intended for system administrators and IT professionals with experience in Windows Server 2008 or Windows Server 2012 environments who are looking to acquire the skills and knowledge necessary to manage and maintain the core infrastructure required for a Windows Server 2012 and Windows Server 2012 R2 environment.

NRSAS: Nuclear Receptor Structure Analysis Servers.

NARCIS (Netherlands)

Bettler, E.J.M.; Krause, R.; Horn, F.; Vriend, G.

2003-01-01

We present a coherent series of servers that can perform a large number of structure analyses on nuclear hormone receptors. These servers are part of the NucleaRDB project, which provides a powerful information system for nuclear hormone receptors. The computations performed by the servers include

Fabrication of a novel silicon single electron transistor for Si:P quantum computer devices

International Nuclear Information System (INIS)

Angus, S.J.; Smith, C.E.A.; Gauja, E.; Dzurak, A.S.; Clark, R.G.; Snider, G.L.

2004-01-01

Full text: Quantum computation relies on the successful measurement of quantum states. Single electron transistors (SETs) are known to be able to perform fast and sensitive charge measurements of solid state qubits. However, due to their sensitivity, SETs are also very susceptible to random charge fluctuations in a solid-state materials environment. In previous dc transport measurements, silicon-based SETs have demonstrated greater charge stability than A1/A1 2 O 3 SETs. We have designed and fabricated a novel silicon SET architecture for a comparison of the noise characteristics of silicon and aluminium based devices. The silicon SET described here is designed for controllable and reproducible low temperature operation. It is fabricated using a novel dual gate structure on a silicon-on-insulator substrate. A silicon quantum wire is formed in a 100nm thick high-resistivity superficial silicon layer using reactive ion etching. Carriers are induced in the silicon wire by a back gate in the silicon substrate. The tunnel barriers are created electrostatically, using lithographically defined metallic electrodes (∼40nm width). These tunnel barriers surround the surface of the quantum wire, thus producing excellent electrostatic confinement. This architecture provides independent control of tunnel barrier height and island occupancy, thus promising better control of Coulomb blockade oscillations than in previously investigated silicon SETs. The use of a near intrinsic silicon substrate offers compatibility with Si:P qubits in the longer term

Distributed expert system architecture using a dedicated knowledge server

International Nuclear Information System (INIS)

Trovato, S.A.; Lindgren, B.M.; Touchton, R.A.

1991-01-01

This paper presents an up-to-date look at REALM, the Reactor Emergency Action Level Monitor Expert Advisor System, including recent innovations in the system architecture and our approach to Verification and Validation (V and V). The emergency classification domain is reviewed and the problem, solution and benefits are outlined. A REALM system description is then presented, followed by a description of the REALM V and V approach. The paper concludes with a look at how REALM is being generalized to embrace plant sensor interpretation beyond emergency classification (e.g. On-line Tech Spec or thermal performance monitoring) under the name of OASYS, for On-line Advisory System

Covert Channels in SIP for VoIP Signalling

Science.gov (United States)

Mazurczyk, Wojciech; Szczypiorski, Krzysztof

In this paper, we evaluate available steganographic techniques for SIP (Session Initiation Protocol) that can be used for creating covert channels during signaling phase of VoIP (Voice over IP) call. Apart from characterizing existing steganographic methods we provide new insights by introducing new techniques. We also estimate amount of data that can be transferred in signalling messages for typical IP telephony call.

Performances of multiprocessor multidisk architectures for continuous media storage

Science.gov (United States)

Gennart, Benoit A.; Messerli, Vincent; Hersch, Roger D.

1996-03-01

Multimedia interfaces increase the need for large image databases, capable of storing and reading streams of data with strict synchronicity and isochronicity requirements. In order to fulfill these requirements, we consider a parallel image server architecture which relies on arrays of intelligent disk nodes, each disk node being composed of one processor and one or more disks. This contribution analyzes through bottleneck performance evaluation and simulation the behavior of two multi-processor multi-disk architectures: a point-to-point architecture and a shared-bus architecture similar to current multiprocessor workstation architectures. We compare the two architectures on the basis of two multimedia algorithms: the compute-bound frame resizing by resampling and the data-bound disk-to-client stream transfer. The results suggest that the shared bus is a potential bottleneck despite its very high hardware throughput (400Mbytes/s) and that an architecture with addressable local memories located closely to their respective processors could partially remove this bottleneck. The point- to-point architecture is scalable and able to sustain high throughputs for simultaneous compute- bound and data-bound operations.

Mastering Windows Server 2008 Networking Foundations

CERN Document Server

Minasi, Mark; Mueller, John Paul

2011-01-01

Find in-depth coverage of general networking concepts and basic instruction on Windows Server 2008 installation and management including active directory, DNS, Windows storage, and TCP/IP and IPv4 networking basics in Mastering Windows Server 2008 Networking Foundations. One of three new books by best-selling author Mark Minasi, this guide explains what servers do, how basic networking works (IP basics and DNS/WINS basics), and the fundamentals of the under-the-hood technologies that support staff must understand. Learn how to install Windows Server 2008 and build a simple network, security co

National Medical Terminology Server in Korea

Science.gov (United States)

Lee, Sungin; Song, Seung-Jae; Koh, Soonjeong; Lee, Soo Kyoung; Kim, Hong-Gee

Interoperable EHR (Electronic Health Record) necessitates at least the use of standardized medical terminologies. This paper describes a medical terminology server, LexCare Suite, which houses terminology management applications, such as a terminology editor, and a terminology repository populated with international standard terminology systems such as Systematized Nomenclature of Medicine (SNOMED). The server is to satisfy the needs of quality terminology systems to local primary to tertiary hospitals. Our partner general hospitals have used the server to test its applicability. This paper describes the server and the results of the applicability test.

The Case for Adopting Server-side Analytics

Science.gov (United States)

Tino, C.; Holmes, C. P.; Feigelson, E.; Hurlburt, N. E.

2017-12-01

The standard method for accessing Earth and space science data relies on a scheme developed decades ago: data residing in one or many data stores must be parsed out and shipped via internet lines or physical transport to the researcher who in turn locally stores the data for analysis. The analyses tasks are varied and include visualization, parameterization, and comparison with or assimilation into physics models. In many cases this process is inefficient and unwieldy as the data sets become larger and demands on the analysis tasks become more sophisticated and complex. For about a decade, several groups have explored a new paradigm to this model. The names applied to the paradigm include "data analytics", "climate analytics", and "server-side analytics". The general concept is that in close network proximity to the data store there will be a tailored processing capability appropriate to the type and use of the data served. The user of the server-side analytics will operate on the data with numerical procedures. The procedures can be accessed via canned code, a scripting processor, or an analysis package such as Matlab, IDL or R. Results of the analytics processes will then be relayed via the internet to the user. In practice, these results will be at a much lower volume, easier to transport to and store locally by the user and easier for the user to interoperate with data sets from other remote data stores. The user can also iterate on the processing call to tailor the results as needed. A major component of server-side analytics could be to provide sets of tailored results to end users in order to eliminate the repetitive preconditioning that is both often required with these data sets and which drives much of the throughput challenges. NASA's Big Data Task Force studied this issue. This paper will present the results of this study including examples of SSAs that are being developed and demonstrated and suggestions for architectures that might be developed for

PERANCANGAN DAN IMPLEMENTASI SERVER VOICE OVER INTERNET PROTOKAL (VOIP DENGAN TRIXBOX PADA WIRELESS LOCAL AREA NETWORK MENGGUNAKAN SMARTPHONE

Directory of Open Access Journals (Sweden)

Muhammad Iqbal Nahwi

2014-06-01

Full Text Available At this time telecommunications data is very important in human life , both in terms of the relationship between the human being and the fulfillment of information and entertainment . While obviously, a current cost of communication in the country including Indonesia is still expensive . The utilization of VoIP technology in communication cheap , safe with good enough quality is very appropriate to be applied in this country . In this VoIP technology to communicate over the phone not only can be done by relying on a conventional telephone or mobile phone , but through the Internet can also be done . In this study, the methodology used is to implement Trixbox VoIP system on linux . VoIP network infrastructure protocols designed using SIP (session initiation protocol as the communication protocol , making use of free software as the operating system Linux Trixbox , asterisk as application servers , and on the client side using the X - Lite softphone Keyyo VoIP application used for client on smartphone.

Ensuring Data Storage Security in Tree cast Routing Architecture for Sensor Networks

Science.gov (United States)

Kumar, K. E. Naresh; Sagar, U. Vidya; Waheed, Mohd. Abdul

2010-10-01

In this paper presents recent advances in technology have made low-cost, low-power wireless sensors with efficient energy consumption. A network of such nodes can coordinate among themselves for distributed sensing and processing of certain data. For which, we propose an architecture to provide a stateless solution in sensor networks for efficient routing in wireless sensor networks. This type of architecture is known as Tree Cast. We propose a unique method of address allocation, building up multiple disjoint trees which are geographically inter-twined and rooted at the data sink. Using these trees, routing messages to and from the sink node without maintaining any routing state in the sensor nodes is possible. In contrast to traditional solutions, where the IT services are under proper physical, logical and personnel controls, this routing architecture moves the application software and databases to the large data centers, where the management of the data and services may not be fully trustworthy. This unique attribute, however, poses many new security challenges which have not been well understood. In this paper, we focus on data storage security, which has always been an important aspect of quality of service. To ensure the correctness of users' data in this architecture, we propose an effective and flexible distributed scheme with two salient features, opposing to its predecessors. By utilizing the homomorphic token with distributed verification of erasure-coded data, our scheme achieves the integration of storage correctness insurance and data error localization, i.e., the identification of misbehaving server(s). Unlike most prior works, the new scheme further supports secure and efficient dynamic operations on data blocks, including: data update, delete and append. Extensive security and performance analysis shows that the proposed scheme is highly efficient and resilient against Byzantine failure, malicious data modification attack, and even server

Cooperation of technical support organizations of state nuclear regulatory committee of Ukraine in sip safety regulation

International Nuclear Information System (INIS)

Bikov, V.O.; Kyilochits'ka, T.P.; Bogorins'kij, P.; Vasil'chenko, V.M.; Kondrat'jev, S.M.; Smishlyajeva, S.P.; Troter, D.

2002-01-01

The main task of the technical support in the Shelter Implementation Plan (SIP) licensing process consists in Technical Evaluation of SIP projects and documents submitted by the Licensee to State Nuclear Regulatory Committee to substantiate the safety of Shelter-related work. The goal of this task is to evaluate the submitted materials whether they meet the requirements of nuclear and radiation safety

Development and implementation of the Caribbean Laboratory Quality Management Systems Stepwise Improvement Process (LQMS-SIP) Towards Accreditation.

Science.gov (United States)

Alemnji, George; Edghill, Lisa; Guevara, Giselle; Wallace-Sankarsingh, Sacha; Albalak, Rachel; Cognat, Sebastien; Nkengasong, John; Gabastou, Jean-Marc

2017-01-01

Implementing quality management systems and accrediting laboratories in the Caribbean has been a challenge. We report the development of a stepwise process for quality systems improvement in the Caribbean Region. The Caribbean Laboratory Stakeholders met under a joint Pan American Health Organization/US Centers for Disease Control and Prevention initiative and developed a user-friendly framework called 'Laboratory Quality Management System - Stepwise Improvement Process (LQMS-SIP) Towards Accreditation' to support countries in strengthening laboratory services through a stepwise approach toward fulfilling the ISO 15189: 2012 requirements. This approach consists of a three-tiered framework. Tier 1 represents the minimum requirements corresponding to the mandatory criteria for obtaining a licence from the Ministry of Health of the participating country. The next two tiers are quality improvement milestones that are achieved through the implementation of specific quality management system requirements. Laboratories that meet the requirements of the three tiers will be encouraged to apply for accreditation. The Caribbean Regional Organisation for Standards and Quality hosts the LQMS-SIP Secretariat and will work with countries, including the Ministry of Health and stakeholders, including laboratory staff, to coordinate and implement LQMS-SIP activities. The Caribbean Public Health Agency will coordinate and advocate for the LQMS-SIP implementation. This article presents the Caribbean LQMS-SIP framework and describes how it will be implemented among various countries in the region to achieve quality improvement.

Geographic Information Systems-Transportation ISTEA management systems server-net prototype pooled fund study: Phase B summary

Energy Technology Data Exchange (ETDEWEB)

Espinoza, J. Jr.; Dean, C.D.; Armstrong, H.M. [and others

1997-06-01

The Geographic Information System-Transportation (GIS-T) ISTEA Management Systems Server Net Prototype Pooled Fund Study represents the first national cooperative effort in the transportation industry to address the management and monitoring systems as well as the statewide and metropolitan transportation planning requirements of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA). The Study was initiated in November 1993 through the Alliance for Transportation Research and under the leadership of the New Mexico State Highway and Transportation Department. Sandia National Laboratories, an Alliance partner, and Geographic Paradigm Computing. Inc. provided technical leadership for the project. In 1992, the Alliance for Transportation Research, the New Mexico State Highway and Transportation Department, Sandia National Laboratories, and Geographic Paradigm Computing, Inc., proposed a comprehensive research agenda for GIS-T. That program outlined a national effort to synthesize new transportation policy initiatives (e.g., management systems and Intelligent Transportation Systems) with the GIS-T server net ideas contained in the NCHRP project {open_quotes}Adaptation of GIS to Transportation{close_quotes}. After much consultation with state, federal, and private interests, a project proposal based on this agenda was prepared and resulted in this Study. The general objective of the Study was to develop GIS-T server net prototypes supporting the ISTEA requirements for transportation planning and management and monitoring systems. This objective can be further qualified to: (1) Create integrated information system architectures and design requirements encompassing transportation planning activities and data. (2) Encourage the development of functional GIS-T server net prototypes. (3) Demonstrate multiple information systems implemented in a server net environment.

NExT server

CERN Document Server

1989-01-01

The first website at CERN - and in the world - was dedicated to the World Wide Web project itself and was hosted on Berners-Lee's NeXT computer. The website described the basic features of the web; how to access other people's documents and how to set up your own server. This NeXT machine - the original web server - is still at CERN. As part of the project to restore the first website, in 2013 CERN reinstated the world's first website to its original address.

The role of groundwater discharge fluxes on Si:P ratios in a major tributary to Lake Erie.

Science.gov (United States)

Maavara, Taylor; Slowinski, Stephanie; Rezanezhad, Fereidoun; Van Meter, Kimberly; Van Cappellen, Philippe

2018-05-01

Groundwater discharge can be a major source of nutrients to river systems. Although quantification of groundwater nitrate loading to streams is common, the dependence of surface water silicon (Si) and phosphorus (P) concentrations on groundwater sources has rarely been determined. Additionally, the ability of groundwater discharge to drive surface water Si:P ratios has not been contextualized relative to riverine inputs or in-stream transformations. In this study, we quantify the seasonal dynamics of Si and P cycles in the Grand River (GR) watershed, the largest Canadian watershed draining into Lake Erie, to test our hypothesis that regions of Si-rich groundwater discharge increase surface water Si:P ratios. Historically, both the GR and Lake Erie have been considered stoichiometrically P-limited, where the molar Si:P ratio is greater than the ~16:1 phytoplankton uptake ratio. However, recent trends suggest that eastern Lake Erie may be approaching Si-limitation. We sampled groundwater and surface water for dissolved and reactive particulate Si as well as total dissolved P for 12months within and downstream of a 50-km reach of high groundwater discharge. Our results indicate that groundwater Si:P ratios are lower than the corresponding surface water and that groundwater is a significant source of bioavailable P to surface water. Despite these observations, the watershed remains P-limited for the majority of the year, with localized periods of Si-limitation. We further find that groundwater Si:P ratios are a relatively minor driver of surface water Si:P, but that the magnitude of Si and P loads from groundwater represent a large proportion of the overall fluxes to Lake Erie. Copyright © 2017 Elsevier B.V. All rights reserved.

CORAL Server and CORAL Server Proxy: Scalable Access to Relational Databases from CORAL Applications

CERN Document Server

Valassi, A; Kalkhof, A; Salnikov, A; Wache, M

2011-01-01

The CORAL software is widely used at CERN for accessing the data stored by the LHC experiments using relational database technologies. CORAL provides a C++ abstraction layer that supports data persistency for several backends and deployment models, including local access to SQLite files, direct client access to Oracle and MySQL servers, and read-only access to Oracle through the FroNTier web server and cache. Two new components have recently been added to CORAL to implement a model involving a middle tier "CORAL server" deployed close to the database and a tree of "CORAL server proxy" instances, with data caching and multiplexing functionalities, deployed close to the client. The new components are meant to provide advantages for read-only and read-write data access, in both offline and online use cases, in the areas of scalability and performance (multiplexing for several incoming connections, optional data caching) and security (authentication via proxy certificates). A first implementation of the two new c...

Architecture of conference control functions

Science.gov (United States)

Kausar, Nadia; Crowcroft, Jon

1999-11-01

Conference control is an integral part in many-to-many communications that is used to manage and co-ordinate multiple users in conferences. There are different types of conferences which require different types of control. Some of the features of conference control may be user invoked while others are for internal management of a conference. In recent years, ITU (International Telecommunication Union) and IETF (Internet Engineering Task Force) have standardized two main models of conferencing, each system providing a set of conference control functionalities that are not easily provided in the other one. This paper analyzes the main activities appropriate for different types of conferences and presents an architecture for conference control called GCCP (Generic Conference Control Protocol). GCCP interworks different types of conferencing and provides a set of conference control functions that can be invoked by users directly. As an example of interworking, interoperation of IETF's SIP and ITU's H.323 call control functions have been examined here. This paper shows that a careful analysis of a conferencing architecture can provide a set of control functions essential for any group communication model that can be extensible if needed.

Open Source Service Agent (OSSA) in the intelligence community's Open Source Architecture

Science.gov (United States)

Fiene, Bruce F.

1994-01-01

The Community Open Source Program Office (COSPO) has developed an architecture for the intelligence community's new Open Source Information System (OSIS). The architecture is a multi-phased program featuring connectivity, interoperability, and functionality. OSIS is based on a distributed architecture concept. The system is designed to function as a virtual entity. OSIS will be a restricted (non-public), user configured network employing Internet communications. Privacy and authentication will be provided through firewall protection. Connection to OSIS can be made through any server on the Internet or through dial-up modems provided the appropriate firewall authentication system is installed on the client.

Personalized Pseudonyms for Servers in the Cloud

Directory of Open Access Journals (Sweden)

Xiao Qiuyu

2017-10-01

Full Text Available A considerable and growing fraction of servers, especially of web servers, is hosted in compute clouds. In this paper we opportunistically leverage this trend to improve privacy of clients from network attackers residing between the clients and the cloud: We design a system that can be deployed by the cloud operator to prevent a network adversary from determining which of the cloud’s tenant servers a client is accessing. The core innovation in our design is a PoPSiCl (pronounced “popsicle”, a persistent pseudonym for a tenant server that can be used by a single client to access the server, whose real identity is protected by the cloud from both passive and active network attackers. When instantiated for TLS-based access to web servers, our design works with all major browsers and requires no additional client-side software and minimal changes to the client user experience. Moreover, changes to tenant servers can be hidden in supporting software (operating systems and web-programming frameworks without imposing on web-content development. Perhaps most notably, our system boosts privacy with minimal impact to web-browsing performance, after some initial setup during a user’s first access to each web server.

Mastering Microsoft Windows Server 2008 R2

CERN Document Server

Minasi, Mark; Finn, Aidan

2010-01-01

The one book you absolutely need to get up and running with Windows Server 2008 R2. One of the world's leading Windows authorities and top-selling author Mark Minasi explores every nook and cranny of the latest version of Microsoft's flagship network operating system, Windows Server 2008 R2, giving you the most in-depth coverage in any book on the market.: Focuses on Windows Windows Server 2008 R2, the newest version of Microsoft's Windows' server line of operating system, and the ideal server for new Windows 7 clients; Author Mark Minasi is one of the world's leading Windows authorities and h

Mastering Windows Server 2012 R2

CERN Document Server

Minasi, Mark; Booth, Christian; Butler, Robert; McCabe, John; Panek, Robert; Rice, Michael; Roth, Stefan

2013-01-01

Check out the new Hyper-V, find new and easier ways to remotely connect back into the office, or learn all about Storage Spaces-these are just a few of the features in Windows Server 2012 R2 that are explained in this updated edition from Windows authority Mark Minasi and a team of Windows Server experts led by Kevin Greene. This book gets you up to speed on all of the new features and functions of Windows Server, and includes real-world scenarios to put them in perspective. If you're a system administrator upgrading to, migrating to, or managing Windows Server 2012 R2, find what you need to

An adversarial queueing model for online server routing

NARCIS (Netherlands)

Bonifaci, V.

2007-01-01

In an online server routing problem, a vehicle or server moves in a network in order to process incoming requests at the nodes. Online server routing problems have been thoroughly studied using competitive analysis. We propose a new model for online server routing, based on adversarial queueing

Roadmap to the SRS computing architecture

Energy Technology Data Exchange (ETDEWEB)

Johnson, A.

1994-07-05

This document outlines the major steps that must be taken by the Savannah River Site (SRS) to migrate the SRS information technology (IT) environment to the new architecture described in the Savannah River Site Computing Architecture. This document proposes an IT environment that is {open_quotes}...standards-based, data-driven, and workstation-oriented, with larger systems being utilized for the delivery of needed information to users in a client-server relationship.{close_quotes} Achieving this vision will require many substantial changes in the computing applications, systems, and supporting infrastructure at the site. This document consists of a set of roadmaps which provide explanations of the necessary changes for IT at the site and describes the milestones that must be completed to finish the migration.

Client-Server and Peer-to-Peer Ad-hoc Network for a Flexible Learning Environment

Directory of Open Access Journals (Sweden)

Ferial Khaddage

2011-01-01

Full Text Available Peer-to-Peer (P2P networking in a mobile learning environment has become a popular topic of research. One of the new emerging research ideas is on the ability to combine P2P network with server-based network to form a strong efficient portable and compatible network infrastructure. This paper describes a unique mobile network architecture, which reflects the on-campus students’ need for a mobile learning environment. This can be achieved by combining two different networks, client-server and peer-to-peer ad-hoc to form a sold and secure network. This is accomplished by employing one peer within the ad-hoc network to act as an agent-peer to facilitate communication and information sharing between the two networks. It can be implemented without any major changes to the current network technologies, and can combine any wireless protocols such as GPRS, Wi-Fi, Bluetooth, and 3G.

Web-based Quality Control Tool used to validate CERES products on a cluster of Linux servers

Science.gov (United States)

Chu, C.; Sun-Mack, S.; Heckert, E.; Chen, Y.; Mlynczak, P.; Mitrescu, C.; Doelling, D.

2014-12-01

There have been a few popular desktop tools used in the Earth Science community to validate science data. Because of the limitation on the capacity of desktop hardware such as disk space and CPUs, those softwares are not able to display large amount of data from files.This poster will talk about an in-house developed web-based software built on a cluster of Linux servers. That allows users to take advantage of a few Linux servers working in parallel to generate hundreds images in a short period of time. The poster will demonstrate:(1) The hardware and software architecture is used to provide high throughput of images. (2) The software structure that can incorporate new products and new requirement quickly. (3) The user interface about how users can manipulate the data and users can control how the images are displayed.

A satellite-driven, client-server hydro-economic model prototype for agricultural water management

Science.gov (United States)

Maneta, Marco; Kimball, John; He, Mingzhu; Payton Gardner, W.

2017-04-01

this product is only available for the conterminous United States, the framework is currently only applicable in this region. To obtain information on crop phenology, productivity and transpiration at adequate spatial and temporal frequencies we blend high spatial resolution Landsat information with high temporal fidelity MODIS imagery. The result is a 30 m, 8-day fused dataset of crop greenness that is subsequently transformed into productivity and transpiration by adapting existing forest productivity and transpiration algorithms for agricultural applications. To ensure all involved agencies work with identical information and that end-users are sheltered from the computational burden of storing and processing remote sensing data, this modeling framework is integrated in a client-server architecture based on the Hydra platform (www.hydraplatform.org). Assimilation and processing of resource-intensive remote sensing information, as well as hydrologic and other ancillary data, occur on the server side. With this architecture, our decision support system becomes a light weight 'app' that connects to the server to retrieve the latest information regarding water demands, land use, yields and hydrologic information required to run different management scenarios. This architecture ensures that all agencies and teams involved in water management use the same, up-to-date information in their simulations.

A tandem queue with delayed server release

OpenAIRE

Nawijn, W.M.

1997-01-01

We consider a tandem queue with two stations. The rst station is an s-server queue with Poisson arrivals and exponential service times. After terminating his service in the rst station, a customer enters the second station to require service at an exponential single server, while in the meantime he is blocking his server in station 1 until he completes service in station 2, whereupon the server in station 1 is released. An analysis of the generating function of the simultaneous probability di...

Parallel Computing Using Web Servers and "Servlets".

Science.gov (United States)

Lo, Alfred; Bloor, Chris; Choi, Y. K.

2000-01-01

Describes parallel computing and presents inexpensive ways to implement a virtual parallel computer with multiple Web servers. Highlights include performance measurement of parallel systems; models for using Java and intranet technology including single server, multiple clients and multiple servers, single client; and a comparison of CGI (common…

JAFA: a protein function annotation meta-server

DEFF Research Database (Denmark)

Friedberg, Iddo; Harder, Tim; Godzik, Adam

2006-01-01

Annotations, or JAFA server. JAFA queries several function prediction servers with a protein sequence and assembles the returned predictions in a legible, non-redundant format. In this manner, JAFA combines the predictions of several servers to provide a comprehensive view of what are the predicted functions...

A polling model with an autonomous server

NARCIS (Netherlands)

de Haan, Roland; Boucherie, Richardus J.; van Ommeren, Jan C.W.

Polling models are used as an analytical performance tool in several application areas. In these models, the focus often is on controlling the operation of the server as to optimize some performance measure. For several applications, controlling the server is not an issue as the server moves

Passive Detection of Misbehaving Name Servers

Science.gov (United States)

2013-10-01

name servers that changed IP address five or more times in a month. Solid red line indicates those servers possibly linked to pharmaceutical scams . 12...malicious and stated that fast-flux hosting “is considered one of the most serious threats to online activities today” [ICANN 2008, p. 2]. The...that time, apparently independent of filters on name-server flux, a large number of pharmaceutical scams1 were taken down. These scams apparently

Thirty Meter Telescope (TMT) Narrow Field Infrared Adaptive Optics System (NFIRAOS) real-time controller preliminary architecture

Science.gov (United States)

Kerley, Dan; Smith, Malcolm; Dunn, Jennifer; Herriot, Glen; Véran, Jean-Pierre; Boyer, Corinne; Ellerbroek, Brent; Gilles, Luc; Wang, Lianqi

2016-08-01

The Narrow Field Infrared Adaptive Optics System (NFIRAOS) is the first light Adaptive Optics (AO) system for the Thirty Meter Telescope (TMT). A critical component of NFIRAOS is the Real-Time Controller (RTC) subsystem which provides real-time wavefront correction by processing wavefront information to compute Deformable Mirror (DM) and Tip/Tilt Stage (TTS) commands. The National Research Council of Canada - Herzberg (NRC-H), in conjunction with TMT, has developed a preliminary design for the NFIRAOS RTC. The preliminary architecture for the RTC is comprised of several Linux-based servers. These servers are assigned various roles including: the High-Order Processing (HOP) servers, the Wavefront Corrector Controller (WCC) server, the Telemetry Engineering Display (TED) server, the Persistent Telemetry Storage (PTS) server, and additional testing and spare servers. There are up to six HOP servers that accept high-order wavefront pixels, and perform parallelized pixel processing and wavefront reconstruction to produce wavefront corrector error vectors. The WCC server performs low-order mode processing, and synchronizes and aggregates the high-order wavefront corrector error vectors from the HOP servers to generate wavefront corrector commands. The Telemetry Engineering Display (TED) server is the RTC interface to TMT and other subsystems. The TED server receives all external commands and dispatches them to the rest of the RTC servers and is responsible for aggregating several offloading and telemetry values that are reported to other subsystems within NFIRAOS and TMT. The TED server also provides the engineering GUIs and real-time displays. The Persistent Telemetry Storage (PTS) server contains fault tolerant data storage that receives and stores telemetry data, including data for Point-Spread Function Reconstruction (PSFR).

Mastering Microsoft Windows Small Business Server 2008

CERN Document Server

Johnson, Steven

2010-01-01

A complete, winning approach to the number one small business solution. Do you have 75 or fewer users or devices on your small-business network? Find out how to integrate everything you need for your mini-enterprise with Microsoft's new Windows Server 2008 Small Business Server, a custom collection of server and management technologies designed to help small operations run smoothly without a giant IT department. This comprehensive guide shows you how to master all SBS components as well as handle integration with other Microsoft technologies.: Focuses on Windows Server 2008 Small Business Serv

Microsoft Windows Server 2012 administration instant reference

CERN Document Server

Hester, Matthew

2013-01-01

Fast, accurate answers for common Windows Server questions Serving as a perfect companion to all Windows Server books, this reference provides you with quick and easily searchable solutions to day-to-day challenges of Microsoft's newest version of Windows Server. Using helpful design features such as thumb tabs, tables of contents, and special heading treatments, this resource boasts a smooth and seamless approach to finding information. Plus, quick-reference tables and lists provide additional on-the-spot answers. Covers such key topics as server roles and functionality, u

A single sip of a strong alcoholic beverage causes exposure to carcinogenic concentrations of acetaldehyde in the oral cavity.

Science.gov (United States)

Linderborg, Klas; Salaspuro, Mikko; Väkeväinen, Satu

2011-09-01

The aim of this study was to explore oral exposure to carcinogenic (group 1) acetaldehyde after single sips of strong alcoholic beverages containing no or high concentrations of acetaldehyde. Eight volunteers tasted 5 ml of ethanol diluted to 40 vol.% with no acetaldehyde and 40 vol.% calvados containing 2400 μM acetaldehyde. Salivary acetaldehyde and ethanol concentrations were measured by gas chromatography. The protocol was repeated after ingestion of ethanol (0.5 g/kg body weight). Salivary acetaldehyde concentration was significantly higher after sipping calvados than after sipping ethanol at 30s both with (215 vs. 128 μmol/l, psipping of the alcoholic beverages. Carcinogenic concentrations of acetaldehyde are produced from ethanol in the oral cavity instantly after a small sip of strong alcoholic beverage, and the exposure continues for at least 10 min. Acetaldehyde present in the beverage has a short-term effect on total acetaldehyde exposure. Copyright © 2011 Elsevier Ltd. All rights reserved.

Server-side Statistics Scripting in PHP

Directory of Open Access Journals (Sweden)

Jan de Leeuw

1997-06-01

Full Text Available On the UCLA Statistics WWW server there are a large number of demos and calculators that can be used in statistics teaching and research. Some of these demos require substantial amounts of computation, others mainly use graphics. These calculators and demos are implemented in various different ways, reflecting developments in WWW based computing. As usual, one of the main choices is between doing the work on the client-side (i.e. in the browser or on the server-side (i.e. on our WWW server. Obviously, client-side computation puts fewer demands on the server. On the other hand, it requires that the client downloads Java applets, or installs plugins and/or helpers. If JavaScript is used, client-side computations will generally be slow. We also have to assume that the client is installed properly, and has the required capabilities. Requiring too much on the client-side has caused browsing machines such as Netscape Communicator to grow beyond all reasonable bounds, both in size and RAM requirements. Moreover requiring Java and JavaScript rules out such excellent browsers as Lynx or Emacs W3. For server-side computing, we can configure the server and its resources ourselves, and we need not worry about browser capabilities and configuration. Nothing needs to be downloaded, except the usual HTML pages and graphics. In the same way as on the client side, there is a scripting solution, where code is interpreted, or a ob ject-code solution using compiled code. For the server-side scripting, we use embedded languages, such as PHP/FI. The scripts in the HTML pages are interpreted by a CGI program, and the output of the CGI program is send to the clients. Of course the CGI program is compiled, but the statistics procedures will usually be interpreted, because PHP/FI does not have the appropriate functions in its scripting language. This will tend to be slow, because embedded languages do not deal efficiently with loops and similar constructs. Thus a first

Triple-server blind quantum computation using entanglement swapping

Science.gov (United States)

Li, Qin; Chan, Wai Hong; Wu, Chunhui; Wen, Zhonghua

2014-04-01

Blind quantum computation allows a client who does not have enough quantum resources or technologies to achieve quantum computation on a remote quantum server such that the client's input, output, and algorithm remain unknown to the server. Up to now, single- and double-server blind quantum computation have been considered. In this work, we propose a triple-server blind computation protocol where the client can delegate quantum computation to three quantum servers by the use of entanglement swapping. Furthermore, the three quantum servers can communicate with each other and the client is almost classical since one does not require any quantum computational power, quantum memory, and the ability to prepare any quantum states and only needs to be capable of getting access to quantum channels.

A microprocessor card software server to support the Quebec health microprocessor card project.

Science.gov (United States)

Durant, P; Bérubé, J; Lavoie, G; Gamache, A; Ardouin, P; Papillon, M J; Fortin, J P

1995-01-01

The Quebec Health Smart Card Project is advocating the use of a memory card software server[1] (SCAM) to implement a portable medical record (PMR) on a smart card. The PMR is viewed as an object that can be manipulated by SCAM's services. In fact, we can talk about a pseudo-object-oriented approach. This software architecture provides a flexible and evolutive way to manage and optimize the PMR. SCAM is a generic software server; it can manage smart cards as well as optical (laser) cards or other types of memory cards. But, in the specific case of the Quebec Health Card Project, SCAM is used to provide services between physicians' or pharmacists' software and IBM smart card technology. We propose to expose the concepts and techniques used to provide a generic environment to deal with smart cards (and more generally with memory cards), to obtain a dynamic an evolutive PMR, to raise the system global security level and the data integrity, to optimize significantly the management of the PMR, and to provide statistic information about the use of the PMR.

RANCANG BANGUN PERANGKAT LUNAK MANAJEMEN DATABASE SQL SERVER BERBASIS WEB

Directory of Open Access Journals (Sweden)

Muchammad Husni

2005-01-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Microsoft SQL Server merupakan aplikasi desktop database server yang bersifat client/server, karena memiliki komponen client, yang  berfungsi menampilkan dan memanipulasi data; serta komponen server yang berfungsi menyimpan, memanggil, dan mengamankan database. Operasi-operasi manajemen semua server database dalam jaringan dilakukan administrator database dengan menggunakan tool administratif utama SQL Server yang bernama Enterprise Manager. Hal ini mengakibatkan administrator database hanya bisa  melakukan operasi-operasi tersebut di komputer yang telah diinstalasi Microsoft SQL Server. Pada penelitian ini, dirancang suatu aplikasi berbasis web dengan menggunakan ASP.Net untuk melakukan pengaturan database server. Aplikasi ini menggunakan ADO.NET yang memanfaatkan Transact-SQL dan stored procedure pada server untuk melakukan operasi-operasi manajemen database pada suatu server database SQL, dan menampilkannya ke dalam web. Administrator database bisa menjalankan aplikasi berbasis web tersebut dari komputer mana saja pada jaringan dan melakukan koneksi ke server database SQL dengan menggunakan web browser. Dengan demikian memudahkan administrator melakukan tugasnya tanpa harus menggunakan komputer server.   Kata Kunci : Transact-SQL, ASP.Net, ADO.NET, SQL Server

Mastering Citrix XenServer

CERN Document Server

Reed, Martez

2014-01-01

If you are an administrator who is looking to gain a greater understanding of how to design and implement a virtualization solution based on Citrix® XenServer®, then this book is for you. The book will serve as an excellent resource for those who are already familiar with other virtualization platforms, such as Microsoft Hyper-V or VMware vSphere.The book assumes that you have a good working knowledge of servers, networking, and storage technologies.

Telescope sipping the optimum fuel leak detection system

International Nuclear Information System (INIS)

Deleryd, R.

1998-01-01

The TELESCOPE Sipping technology is an evolutionary development from previous ABB fuel leak systems used in LWR reactors. The system utilizes the existing dynamics that cause numerous fission products to leak from a failed fuel rod when the fuel assembly is raised from a reactor core during core fuel alterations. The system can also be used by repair work in pool side inspection in order to detect leaking rods or to verify reconstituted assemblies as non leakers. (author)

Securing SQL Server Protecting Your Database from Attackers

CERN Document Server

Cherry, Denny

2012-01-01

Written by Denny Cherry, a Microsoft MVP for the SQL Server product, a Microsoft Certified Master for SQL Server 2008, and one of the biggest names in SQL Server today, Securing SQL Server, Second Edition explores the potential attack vectors someone can use to break into your SQL Server database as well as how to protect your database from these attacks. In this book, you will learn how to properly secure your database from both internal and external threats using best practices and specific tricks the author uses in his role as an independent consultant while working on some of the largest

Securing SQL server protecting your database from attackers

CERN Document Server

Cherry, Denny

2015-01-01

SQL server is the most widely-used database platform in the world, and a large percentage of these databases are not properly secured, exposing sensitive customer and business data to attack. In Securing SQL Server, Third Edition, you will learn about the potential attack vectors that can be used to break into SQL server databases as well as how to protect databases from these attacks. In this book, Denny Cherry - a Microsoft SQL MVP and one of the biggest names in SQL server - will teach you how to properly secure an SQL server database from internal and external threats using best practic

Louisiana SIP: LAC 33:III Ch. 7 - Table 2 - Ambient Air--Methods of Contaminant Measurements; SIP effective 1989-05-08 (LAc49) and 1989-08-14 (LAc50) to 2011-08-03 (LAd34 - Moved to Section 711 and revised [adds PM-2.5])

Science.gov (United States)

Louisiana SIP: LAC 33:III Ch. 7 - Table 2 - Ambient Air--Methods of Contaminant Measurements; SIP effective 1989-05-08 (LAc49) and 1989-08-14 (LAc50) to 2011-08-03 (LAd34 - Moved to Section 711 and revised [adds PM-2.5])

Server farms with setup costs

NARCIS (Netherlands)

Gandhi, A.; Harchol-Balter, M.; Adan, I.J.B.F.

2010-01-01

In this paper we consider server farms with a setup cost. This model is common in manufacturing systems and data centers, where there is a cost to turn servers on. Setup costs always take the form of a time delay, and sometimes there is additionally a power penalty, as in the case of data centers.

TBI server: a web server for predicting ion effects in RNA folding.

Science.gov (United States)

Zhu, Yuhong; He, Zhaojian; Chen, Shi-Jie

2015-01-01

Metal ions play a critical role in the stabilization of RNA structures. Therefore, accurate prediction of the ion effects in RNA folding can have a far-reaching impact on our understanding of RNA structure and function. Multivalent ions, especially Mg²⁺, are essential for RNA tertiary structure formation. These ions can possibly become strongly correlated in the close vicinity of RNA surface. Most of the currently available software packages, which have widespread success in predicting ion effects in biomolecular systems, however, do not explicitly account for the ion correlation effect. Therefore, it is important to develop a software package/web server for the prediction of ion electrostatics in RNA folding by including ion correlation effects. The TBI web server http://rna.physics.missouri.edu/tbi_index.html provides predictions for the total electrostatic free energy, the different free energy components, and the mean number and the most probable distributions of the bound ions. A novel feature of the TBI server is its ability to account for ion correlation and ion distribution fluctuation effects. By accounting for the ion correlation and fluctuation effects, the TBI server is a unique online tool for computing ion-mediated electrostatic properties for given RNA structures. The results can provide important data for in-depth analysis for ion effects in RNA folding including the ion-dependence of folding stability, ion uptake in the folding process, and the interplay between the different energetic components.

TBI server: a web server for predicting ion effects in RNA folding.

Directory of Open Access Journals (Sweden)

Yuhong Zhu

Full Text Available Metal ions play a critical role in the stabilization of RNA structures. Therefore, accurate prediction of the ion effects in RNA folding can have a far-reaching impact on our understanding of RNA structure and function. Multivalent ions, especially Mg²⁺, are essential for RNA tertiary structure formation. These ions can possibly become strongly correlated in the close vicinity of RNA surface. Most of the currently available software packages, which have widespread success in predicting ion effects in biomolecular systems, however, do not explicitly account for the ion correlation effect. Therefore, it is important to develop a software package/web server for the prediction of ion electrostatics in RNA folding by including ion correlation effects.The TBI web server http://rna.physics.missouri.edu/tbi_index.html provides predictions for the total electrostatic free energy, the different free energy components, and the mean number and the most probable distributions of the bound ions. A novel feature of the TBI server is its ability to account for ion correlation and ion distribution fluctuation effects.By accounting for the ion correlation and fluctuation effects, the TBI server is a unique online tool for computing ion-mediated electrostatic properties for given RNA structures. The results can provide important data for in-depth analysis for ion effects in RNA folding including the ion-dependence of folding stability, ion uptake in the folding process, and the interplay between the different energetic components.

Cable-telco architectures

Science.gov (United States)

McGrath, Carl J.

1994-11-01

Continued evolution of consumer broadband services such as digital video and digital multimedia has placed renewed emphasis on the need for network solutions to the broadband connectivity challenge. Although still important to architectural planners, connection oriented broadband services based on ISDN concepts must now compete with a wider array of broadcast and highly asymmetrical services for bandwidth on the network. For network operators, the business imperative is to identify and execute a network rebuild plan that will meet the capacity and flexibility needs of these services and compete with the inevitable alternate paths into the home. This paper focuses on some of the key issues facing broadband network planners as they search for the best architecture to meet the business and operations goals in their segment of the market. It will be apparent that no single optimum solution exists for all deployment scenarios, emphasizing the need for flexible and modular sources (such as servers) and network interfaces (such as set tops) which preserve the value of content, the ultimate driver in this round of network revolution.

Using Servers to Enhance Control System Capability

International Nuclear Information System (INIS)

Bickley, M.; Bowling, B. A.; Bryan, D. A.; Zeijts, J. van; White, K. S.; Witherspoon, S.

1999-01-01

Many traditional control systems include a distributed collection of front end machines to control hardware. Backend tools are used to view, modify, and record the signals generated by these front end machines. Software servers, which are a middleware layer between the front and back ends, can improve a control system in several ways. Servers can enable on-line processing of raw data, and consolidation of functionality. It many cases data retrieved from the front end must be processed in order to convert the raw data into useful information. These calculations are often redundantly performance by different programs, frequently offline. Servers can monitor the raw data and rapidly perform calculations, producing new signals which can be treated like any other control system signal, and can be used by any back end application. Algorithms can be incorporated to actively modify signal values in the control system based upon changes of other signals, essentially producing feedback in a control system. Servers thus increase the flexibility of a control system. Lastly, servers running on inexpensive UNIXworkstations can relay or cache frequently needed information, reducing the load on front end hardware by functioning as concentrators. Rather than many back end tools connecting directly to the front end machines, increasing the work load of these machines, they instead connect to the server. Servers like those discussed above have been used successfully at the Thomas Jefferson National Accelerator Facility to provide functionality such as beam steering, fault monitoring, storage of machine parameters, and on-line data processing. The authors discuss the potential uses of such servers, and share the results of work performed to date

Web based system architecture for long pulse remote experimentation

International Nuclear Information System (INIS)

Heras, E. de las; Lastra, D.; Vega, J.; Castro, R.; Ruiz, M.; Barrera, E.

2010-01-01

Remote experimentation (RE) methods will be essential in next generation fusion devices. Requirements for long pulse RE will be: on-line data visualization, on-line data acquisition processes monitoring and on-line data acquisition systems interactions (start, stop or set-up modifications). Note that these methods are not oriented to real-time control of fusion plant devices. INDRA Sistemas S.A., CIEMAT (Centro de Investigaciones Energeticas Medioambientales y Tecnologicas) and UPM (Universidad Politecnica de Madrid) have designed a specific software architecture for these purposes. The architecture can be supported on the BeansNet platform, whose integration with an application server provides an adequate solution to the requirements. BeansNet is a JINI based framework developed by INDRA, which makes easy the implementation of a remote experimentation model based on a Service Oriented Architecture. The new software architecture has been designed on the basis of the experience acquired in the development of an upgrade of the TJ-II remote experimentation system.

Server-Aided Verification Signature with Privacy for Mobile Computing

Directory of Open Access Journals (Sweden)

Lingling Xu

2015-01-01

Full Text Available With the development of wireless technology, much data communication and processing has been conducted in mobile devices with wireless connection. As we know that the mobile devices will always be resource-poor relative to static ones though they will improve in absolute ability, therefore, they cannot process some expensive computational tasks due to the constrained computational resources. According to this problem, server-aided computing has been studied in which the power-constrained mobile devices can outsource some expensive computation to a server with powerful resources in order to reduce their computational load. However, in existing server-aided verification signature schemes, the server can learn some information about the message-signature pair to be verified, which is undesirable especially when the message includes some secret information. In this paper, we mainly study the server-aided verification signatures with privacy in which the message-signature pair to be verified can be protected from the server. Two definitions of privacy for server-aided verification signatures are presented under collusion attacks between the server and the signer. Then based on existing signatures, two concrete server-aided verification signature schemes with privacy are proposed which are both proved secure.

A System Architecture and Migration Plan for the Student Services Department of the Marine Corps Institute

National Research Council Canada - National Science Library

Evers

1997-01-01

... to a client server based, open information system for the Marine Corps Institute (MCI). The primary objective of this thesis is to develop the technology architecture required to support the information systems of the Student Services Department (SSD...

Targeting Unknowns Just Underfoot: Microbial Ecology and Community Genomics of C Cycling in Soil Informed and Enabled with DNA-SIP

Science.gov (United States)

Pepe-Ranney, C. P.; Campbell, A.; Buckley, D. H.

2015-12-01

Microorganisms drive biogeochemical cycles and because soil is a large global carbon (C) reservoir (soil contains more C than plants and the atmosphere combined), soil microorganisms are important players in the global C-cycle. Frustratingly, however, many soil microorganisms resist cultivation and soil communities are astoundingly complex. This makes soil microbiology difficult to study and without a solid understanding of soil microbial ecology, models of soil C feedbacks to climate change are under-informed. Stable isotope probing (SIP) is a useful approach for establishing identity-function connections in microbial communities but has been challenging to employ in soil due to the inadequate resolution of microbial community fingerprinting techniques. High throughput DNA sequencing improves SIP resolving power transforming it into a powerful tool for studying the soil C cycle. We conducted a DNA-SIP experiment to track flow of xylose-C, a labile component of plant biomass, and cellulose-C, the most abundant global biopolymer, through a soil microbial community. We could track 13C into microbial DNA even when added 13C amounted to less than 5% of native C and found Spartobacteria, Chloroflexi, and Planctomycetes taxa were among those that assimilated 13C cellulose. These lineages are cosmopolitan in soil but little is known of their ecophysiology. By profiling SSU rRNA genes across entire DNA-SIP density gradients, we assessed relative DNA atom % 13C per taxon in 13C treatments and found cellulose degraders exhibited signal consistent with a specialist lifestyle with respect to C preference. Further, DNA-SIP enriches DNA of targeted microorganisms (Verrucomicrobia cellulose degraders were enriched by nearly two orders of magnitude) and this enriched DNA can serve as template for community genomics. We produced draft genomes from soil cellulose degraders including microorganisms belonging to Verrucomicrobia, Chloroflexi, and Planctomycetes from SIP enriched DNA

Data Intensive Architecture for Scalable Cyber Analytics

Energy Technology Data Exchange (ETDEWEB)

Olsen, Bryan K.; Johnson, John R.; Critchlow, Terence J.

2011-12-19

Cyber analysts are tasked with the identification and mitigation of network exploits and threats. These compromises are difficult to identify due to the characteristics of cyber communication, the volume of traffic, and the duration of possible attack. In this paper, we describe a prototype implementation designed to provide cyber analysts an environment where they can interactively explore a month’s worth of cyber security data. This prototype utilized On-Line Analytical Processing (OLAP) techniques to present a data cube to the analysts. The cube provides a summary of the data, allowing trends to be easily identified as well as the ability to easily pull up the original records comprising an event of interest. The cube was built using SQL Server Analysis Services (SSAS), with the interface to the cube provided by Tableau. This software infrastructure was supported by a novel hardware architecture comprising a Netezza TwinFin® for the underlying data warehouse and a cube server with a FusionIO drive hosting the data cube. We evaluated this environment on a month’s worth of artificial, but realistic, data using multiple queries provided by our cyber analysts. As our results indicate, OLAP technology has progressed to the point where it is in a unique position to provide novel insights to cyber analysts, as long as it is supported by an appropriate data intensive architecture.

Measurements of the LHCb software stack on the ARM architecture

International Nuclear Information System (INIS)

Kartik, S Vijay; Couturier, Ben; Clemencic, Marco; Neufeld, Niko

2014-01-01

The ARM architecture is a power-efficient design that is used in most processors in mobile devices all around the world today since they provide reasonable compute performance per watt. The current LHCb software stack is designed (and thus expected) to build and run on machines with the x86/x86 6 4 architecture. This paper outlines the process of measuring the performance of the LHCb software stack on the ARM architecture – specifically, the ARMv7 architecture on Cortex-A9 processors from NVIDIA and on full-fledged ARM servers with chipsets from Calxeda – and makes comparisons with the performance on x86 6 4 architectures on the Intel Xeon L5520/X5650 and AMD Opteron 6272. The paper emphasises the aspects of performance per core with respect to the power drawn by the compute nodes for the given performance – this ensures a fair real-world comparison with much more 'powerful' Intel/AMD processors. The comparisons of these real workloads in the context of LHCb are also complemented with the standard synthetic benchmarks HEPSPEC and Coremark. The pitfalls and solutions for the non-trivial task of porting the source code to build for the ARMv7 instruction set are presented. The specific changes in the build process needed for ARM-specific portions of the software stack are described, to serve as pointers for further attempts taken up by other groups in this direction. Cases where architecture-specific tweaks at the assembler lever (both in ROOT and the LHCb software stack) were needed for a successful compile are detailed – these cases are good indicators of where/how the software stack as well as the build system can be made more portable and multi-arch friendly. The experience gained from the tasks described in this paper are intended to i) assist in making an informed choice about ARM-based server solutions as a feasible low-power alternative to the current compute nodes, and ii) revisit the software design and build system for portability and

Web server's reliability improvements using recurrent neural networks

DEFF Research Database (Denmark)

Madsen, Henrik; Albu, Rǎzvan-Daniel; Felea, Ioan

2012-01-01

In this paper we describe an interesting approach to error prediction illustrated by experimental results. The application consists of monitoring the activity for the web servers in order to collect the specific data. Predicting an error with severe consequences for the performance of a server (t...... usage, network usage and memory usage. We collect different data sets from monitoring the web server's activity and for each one we predict the server's reliability with the proposed recurrent neural network. © 2012 Taylor & Francis Group...

An Architecture Offering Mobile Pollution Sensing with High Spatial Resolution

Directory of Open Access Journals (Sweden)

Oscar Alvear

2016-01-01

Full Text Available Mobile sensing is becoming the best option to monitor our environment due to its ease of use, high flexibility, and low price. In this paper, we present a mobile sensing architecture able to monitor different pollutants using low-end sensors. Although the proposed solution can be deployed everywhere, it becomes especially meaningful in crowded cities where pollution values are often high, being of great concern to both population and authorities. Our architecture is composed of three different modules: a mobile sensor for monitoring environment pollutants, an Android-based device for transferring the gathered data to a central server, and a central processing server for analyzing the pollution distribution. Moreover, we analyze different issues related to the monitoring process: (i filtering captured data to reduce the variability of consecutive measurements; (ii converting the sensor output to actual pollution levels; (iii reducing the temporal variations produced by mobile sensing process; and (iv applying interpolation techniques for creating detailed pollution maps. In addition, we study the best strategy to use mobile sensors by first determining the influence of sensor orientation on the captured values and then analyzing the influence of time and space sampling in the interpolation process.

Computational methods using weighed-extreme learning machine to predict protein self-interactions with protein evolutionary information.

Science.gov (United States)

An, Ji-Yong; Zhang, Lei; Zhou, Yong; Zhao, Yu-Jun; Wang, Da-Fu

2017-08-18

Self-interactions Proteins (SIPs) is important for their biological activity owing to the inherent interaction amongst their secondary structures or domains. However, due to the limitations of experimental Self-interactions detection, one major challenge in the study of prediction SIPs is how to exploit computational approaches for SIPs detection based on evolutionary information contained protein sequence. In the work, we presented a novel computational approach named WELM-LAG, which combined the Weighed-Extreme Learning Machine (WELM) classifier with Local Average Group (LAG) to predict SIPs based on protein sequence. The major improvement of our method lies in presenting an effective feature extraction method used to represent candidate Self-interactions proteins by exploring the evolutionary information embedded in PSI-BLAST-constructed position specific scoring matrix (PSSM); and then employing a reliable and robust WELM classifier to carry out classification. In addition, the Principal Component Analysis (PCA) approach is used to reduce the impact of noise. The WELM-LAG method gave very high average accuracies of 92.94 and 96.74% on yeast and human datasets, respectively. Meanwhile, we compared it with the state-of-the-art support vector machine (SVM) classifier and other existing methods on human and yeast datasets, respectively. Comparative results indicated that our approach is very promising and may provide a cost-effective alternative for predicting SIPs. In addition, we developed a freely available web server called WELM-LAG-SIPs to predict SIPs. The web server is available at http://219.219.62.123:8888/WELMLAG/ .

Windows Terminal Servers Orchestration

Science.gov (United States)

Bukowiec, Sebastian; Gaspar, Ricardo; Smith, Tim

2017-10-01

Windows Terminal Servers provide application gateways for various parts of the CERN accelerator complex, used by hundreds of CERN users every day. The combination of new tools such as Puppet, HAProxy and Microsoft System Center suite enable automation of provisioning workflows to provide a terminal server infrastructure that can scale up and down in an automated manner. The orchestration does not only reduce the time and effort necessary to deploy new instances, but also facilitates operations such as patching, analysis and recreation of compromised nodes as well as catering for workload peaks.

The RNAsnp web server

DEFF Research Database (Denmark)

Radhakrishnan, Sabarinathan; Tafer, Hakim; Seemann, Ernst Stefan

2013-01-01

, are derived from extensive pre-computed tables of distributions of substitution effects as a function of gene length and GC content. Here, we present a web service that not only provides an interface for RNAsnp but also features a graphical output representation. In addition, the web server is connected...... to a local mirror of the UCSC genome browser database that enables the users to select the genomic sequences for analysis and visualize the results directly in the UCSC genome browser. The RNAsnp web server is freely available at: http://rth.dk/resources/rnasnp/....

Optimizing queries in SQL Server 2008

Directory of Open Access Journals (Sweden)

Ion LUNGU

2010-05-01

Full Text Available Starting from the need to develop efficient IT systems, we intend to review theoptimization methods and tools that can be used by SQL Server database administratorsand developers of applications based on Microsoft technology, focusing on the latestversion of the proprietary DBMS, SQL Server 2008. We’ll reflect on the objectives tobe considered in improving the performance of SQL Server instances, we will tackle themostly used techniques for analyzing and optimizing queries and we will describe the“Optimize for ad hoc workloads”, “Plan Freezing” and “Optimize for unknown" newoptions, accompanied by relevant code examples.

Platform Architecture for Decentralized Positioning Systems

Directory of Open Access Journals (Sweden)

Zakaria Kasmi

2017-04-01

Full Text Available A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

Joint inversion of NMR and SIP data to estimate pore size distribution of geomaterials

Science.gov (United States)

Niu, Qifei; Zhang, Chi

2018-03-01

There are growing interests in using geophysical tools to characterize the microstructure of geomaterials because of the non-invasive nature and the applicability in field. In these applications, multiple types of geophysical data sets are usually processed separately, which may be inadequate to constrain the key feature of target variables. Therefore, simultaneous processing of multiple data sets could potentially improve the resolution. In this study, we propose a method to estimate pore size distribution by joint inversion of nuclear magnetic resonance (NMR) T2 relaxation and spectral induced polarization (SIP) spectra. The petrophysical relation between NMR T2 relaxation time and SIP relaxation time is incorporated in a nonlinear least squares problem formulation, which is solved using Gauss-Newton method. The joint inversion scheme is applied to a synthetic sample and a Berea sandstone sample. The jointly estimated pore size distributions are very close to the true model and results from other experimental method. Even when the knowledge of the petrophysical models of the sample is incomplete, the joint inversion can still capture the main features of the pore size distribution of the samples, including the general shape and relative peak positions of the distribution curves. It is also found from the numerical example that the surface relaxivity of the sample could be extracted with the joint inversion of NMR and SIP data if the diffusion coefficient of the ions in the electrical double layer is known. Comparing to individual inversions, the joint inversion could improve the resolution of the estimated pore size distribution because of the addition of extra data sets. The proposed approach might constitute a first step towards a comprehensive joint inversion that can extract the full pore geometry information of a geomaterial from NMR and SIP data.

Energy Efficiency in Small Server Rooms: Field Surveys and Findings

Energy Technology Data Exchange (ETDEWEB)

Cheung, Iris [Hoi; Greenberg, Steve; Mahdavi, Roozbeh; Brown, Richard; Tschudi, William

2014-08-11

Fifty-seven percent of US servers are housed in server closets, server rooms, and localized data centers, in what are commonly referred to as small server rooms, which comprise 99percent of all server spaces in the US. While many mid-tier and enterprise-class data centers are owned by large corporations that consider energy efficiency a goal to minimize business operating costs, small server rooms typically are not similarly motivated. They are characterized by decentralized ownership and management and come in many configurations, which creates a unique set of efficiency challenges. To develop energy efficiency strategies for these spaces, we surveyed 30 small server rooms across eight institutions, and selected four of them for detailed assessments. The four rooms had Power Usage Effectiveness (PUE) values ranging from 1.5 to 2.1. Energy saving opportunities ranged from no- to low-cost measures such as raising cooling set points and better airflow management, to more involved but cost-effective measures including server consolidation and virtualization, and dedicated cooling with economizers. We found that inefficiencies mainly resulted from organizational rather than technical issues. Because of the inherent space and resource limitations, the most effective measure is to operate servers through energy-efficient cloud-based services or well-managed larger data centers, rather than server rooms. Backup power requirement, and IT and cooling efficiency should be evaluated to minimize energy waste in the server space. Utility programs are instrumental in raising awareness and spreading technical knowledge on server operation, and the implementation of energy efficiency measures in small server rooms.

Security Mechanism Based on Hospital Authentication Server for Secure Application of Implantable Medical Devices

Science.gov (United States)

2014-01-01

After two recent security attacks against implantable medical devices (IMDs) have been reported, the privacy and security risks of IMDs have been widely recognized in the medical device market and research community, since the malfunctioning of IMDs might endanger the patient's life. During the last few years, a lot of researches have been carried out to address the security-related issues of IMDs, including privacy, safety, and accessibility issues. A physician accesses IMD through an external device called a programmer, for diagnosis and treatment. Hence, cryptographic key management between IMD and programmer is important to enforce a strict access control. In this paper, a new security architecture for the security of IMDs is proposed, based on a 3-Tier security model, where the programmer interacts with a Hospital Authentication Server, to get permissions to access IMDs. The proposed security architecture greatly simplifies the key management between IMDs and programmers. Also proposed is a security mechanism to guarantee the authenticity of the patient data collected from IMD and the nonrepudiation of the physician's treatment based on it. The proposed architecture and mechanism are analyzed and compared with several previous works, in terms of security and performance. PMID:25276797

Security mechanism based on Hospital Authentication Server for secure application of implantable medical devices.

Science.gov (United States)

Park, Chang-Seop

2014-01-01

After two recent security attacks against implantable medical devices (IMDs) have been reported, the privacy and security risks of IMDs have been widely recognized in the medical device market and research community, since the malfunctioning of IMDs might endanger the patient's life. During the last few years, a lot of researches have been carried out to address the security-related issues of IMDs, including privacy, safety, and accessibility issues. A physician accesses IMD through an external device called a programmer, for diagnosis and treatment. Hence, cryptographic key management between IMD and programmer is important to enforce a strict access control. In this paper, a new security architecture for the security of IMDs is proposed, based on a 3-Tier security model, where the programmer interacts with a Hospital Authentication Server, to get permissions to access IMDs. The proposed security architecture greatly simplifies the key management between IMDs and programmers. Also proposed is a security mechanism to guarantee the authenticity of the patient data collected from IMD and the nonrepudiation of the physician's treatment based on it. The proposed architecture and mechanism are analyzed and compared with several previous works, in terms of security and performance.

Savannah River Site computing architecture

Energy Technology Data Exchange (ETDEWEB)

1991-03-29

A computing architecture is a framework for making decisions about the implementation of computer technology and the supporting infrastructure. Because of the size, diversity, and amount of resources dedicated to computing at the Savannah River Site (SRS), there must be an overall strategic plan that can be followed by the thousands of site personnel who make decisions daily that directly affect the SRS computing environment and impact the site's production and business systems. This plan must address the following requirements: There must be SRS-wide standards for procurement or development of computing systems (hardware and software). The site computing organizations must develop systems that end users find easy to use. Systems must be put in place to support the primary function of site information workers. The developers of computer systems must be given tools that automate and speed up the development of information systems and applications based on computer technology. This document describes a proposal for a site-wide computing architecture that addresses the above requirements. In summary, this architecture is standards-based data-driven, and workstation-oriented with larger systems being utilized for the delivery of needed information to users in a client-server relationship.

Savannah River Site computing architecture

Energy Technology Data Exchange (ETDEWEB)

1991-03-29

A computing architecture is a framework for making decisions about the implementation of computer technology and the supporting infrastructure. Because of the size, diversity, and amount of resources dedicated to computing at the Savannah River Site (SRS), there must be an overall strategic plan that can be followed by the thousands of site personnel who make decisions daily that directly affect the SRS computing environment and impact the site`s production and business systems. This plan must address the following requirements: There must be SRS-wide standards for procurement or development of computing systems (hardware and software). The site computing organizations must develop systems that end users find easy to use. Systems must be put in place to support the primary function of site information workers. The developers of computer systems must be given tools that automate and speed up the development of information systems and applications based on computer technology. This document describes a proposal for a site-wide computing architecture that addresses the above requirements. In summary, this architecture is standards-based data-driven, and workstation-oriented with larger systems being utilized for the delivery of needed information to users in a client-server relationship.

Design and construction of the SIPPING for fuels of the TRIGA Mark III reactor; Diseno y construccion del SIPPING para combustibles del reactor TRIGA Mark III

Energy Technology Data Exchange (ETDEWEB)

Castaneda J, G.; Delfin L, A.; Alvarado P, R.; Mazon R, R.; Ortega V, B. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: adl@nuclear.inin.mx

2003-07-01

The sipping technique, it has been used by several possessors of nuclear research reactors in its irradiated nuclear fuels, likewise in some fuel storage sites, with the objective of to determine the quantity of radioactivity that the fuel liberates in the means in that it is. The irradiated fuel in storage of some nuclear research reactors, its can have cracks that cross the cladding of the same one, generating the liberation of fission products that its need to determine to maintain safety measures appropriate as much as the fuel as of the facilities where they are. It doesn't exist until now, some method published for the non destructive sipping test technique. Based on that described, the Reactor Department of the National Institute of Nuclear Research, it has designed and built an inspection system of irradiated fuel that it will allow the detection of gassy fission products in site, and solids by means of the measurement of the activity of the Cs-137 contained in water samples. (Author)

Server-Aided Two-Party Computation with Simultaneous Corruption

DEFF Research Database (Denmark)

Cascudo Pueyo, Ignacio; Damgård, Ivan Bjerre; Ranellucci, Samuel

We consider secure two-party computation in the client-server model where there are two adversaries that operate separately but simultaneously, each of them corrupting one of the parties and a restricted subset of servers that they interact with. We model security via the local universal composab......We consider secure two-party computation in the client-server model where there are two adversaries that operate separately but simultaneously, each of them corrupting one of the parties and a restricted subset of servers that they interact with. We model security via the local universal...

Cluster Server IPTV dengan Penjadwalan Algoritma Round Robin

Directory of Open Access Journals (Sweden)

Didik Aribowo

2016-03-01

Full Text Available Perkembangan teknologi informasi yang pesat, otomatis seiring juga dengan meningkatnya para pengguna yang terhubung pada jaringan internet. Berawal dari sebuah single server yang selalu mendapatkan request dari banyak user, perlahan tapi pasti akan terjadi overload dan crash sehingga berdampak pada request yang tidak dapat dilayani oleh single server. Desain arsitektur cluster dapat dibangun dengan menggunakan konsep network load balancing yang memungkinkan proses pengolahan data di share ke dalam beberapa komputer. Dalam penelitian ini menggunakan algoritma penjadwalan round robin sebagai solusi alternatif mengatasi permasalah overload data pada server yang dapat mempengaruhi kinerja sistem IPTV. Untuk  jumlah request yang digunakan dalam penelitian ini adalah 5000, 15000, 25000, dan 50000 request. Dengan metode tersebut, maka performansi algoritma penjawalan dapat diamati dengan menekankan pada parameter sebagai berikut, yaitu throughput, respon time, reply connection, dan error connection sehingga didapatkan algoritma penjadwalan terbaik dalam rangka optimalisasi cluster server IPTV. Secara otomatis dalam proses load balancing mampu mengurangi beban kerja setiap server sehingga tidak ada server yang overload dan memungkinkan server  menggunakan bandwidth  yang tersedia secara lebih efektif serta menyediakan akses yang cepat ke web browser yang dihosting. Implementasi webserver cluster dengan skema load balancing dapat memberikan alvalaibilitas sistem yang tetap terjaga dan skalabilitas yang cukup untuk dapat tetap melayani setiap request dari pengguna

GlobAl Distribution of GEnetic Traits (GADGET) web server: polygenic trait scores worldwide.

Science.gov (United States)

Chande, Aroon T; Wang, Lu; Rishishwar, Lavanya; Conley, Andrew B; Norris, Emily T; Valderrama-Aguirre, Augusto; Jordan, I King

2018-05-18

Human populations from around the world show striking phenotypic variation across a wide variety of traits. Genome-wide association studies (GWAS) are used to uncover genetic variants that influence the expression of heritable human traits; accordingly, population-specific distributions of GWAS-implicated variants may shed light on the genetic basis of human phenotypic diversity. With this in mind, we developed the GlobAl Distribution of GEnetic Traits web server (GADGET http://gadget.biosci.gatech.edu). The GADGET web server provides users with a dynamic visual platform for exploring the relationship between worldwide genetic diversity and the genetic architecture underlying numerous human phenotypes. GADGET integrates trait-implicated single nucleotide polymorphisms (SNPs) from GWAS, with population genetic data from the 1000 Genomes Project, to calculate genome-wide polygenic trait scores (PTS) for 818 phenotypes in 2504 individual genomes. Population-specific distributions of PTS are shown for 26 human populations across 5 continental population groups, with traits ordered based on the extent of variation observed among populations. Users of GADGET can also upload custom trait SNP sets to visualize global PTS distributions for their own traits of interest.

A Graphical Client-Server Approach to Financial Management

CERN Document Server

Möller, M

1994-01-01

At the European Laboratory for Particle Physics (CERN), we have an annual budget of around 600 million US dollars. In order to manage this budget successfully, fast, accurate and easy information access is required throughout the management hierarchy. To meet these goals we have focused on the powerful combination of Relational Database Technology, Fourth Generation Tools and Client-Server architecture. Using these technologies we have developed a powerful and easy-to-use management information tool (known as the BHT) which allows the follow up and tracking of expenditure at all levels throughout the organization. Executives may instantaneously produce up-to-date graphics showing the expenditure profile of the organization. These graphics may then be used as a basis for ‘zooming in’ to view more and more details until the individual financial transactions are reached (all of which are on-line and available on the user’s desktop). The graphical user interface runs on both Macintosh and PC. Using ORACLE�...

BEBAN JARINGAN SAAT MENGAKSES EMAIL DARI BEBERAPA MAIL SERVER

Directory of Open Access Journals (Sweden)

Husni Thamrin

2017-01-01

Full Text Available Expensive internet facilities require prudent in its use both as a source of information and communication media. This paper discusses observations of the perceived burden of network bandwidth when accessing some of the mail server using a webmail application. Mail server in question consists of three commercial server and 2 non-commercial server. Data when it download home page, while logged in, open the email, and during idle logout recorded with sniffer Wireshark. Observations in various situations and scenarios indicate that access Yahoo email gives the network load is very high while the SquirrelMail gives the network load is very low than 5 other mail servers. For an institution, use a local mail server (institutional is highly recommended in the context of banddwidth savings.

Maintenance in Single-Server Queues: A Game-Theoretic Approach

Directory of Open Access Journals (Sweden)

Najeeb Al-Matar

2009-01-01

examine a single-server queue with bulk input and secondary work during server's multiple vacations. When the buffer contents become exhausted the server leaves the system to perform some diagnostic service of a minimum of L jobs clustered in packets of random sizes (event A. The server is not supposed to stay longer than T units of time (event B. The server returns to the system when A or B occurs, whichever comes first. On the other hand, he may not break service of a packet in a middle even if A or B occurs. Furthermore, the server waits for batches of customers to arrive if upon his return the queue is still empty. We obtain a compact and explicit form functional for the queueing process in equilibrium.

A robust ECC based mutual authentication protocol with anonymity for session initiation protocol.

Science.gov (United States)

Mehmood, Zahid; Chen, Gongliang; Li, Jianhua; Li, Linsen; Alzahrani, Bander

2017-01-01

Over the past few years, Session Initiation Protocol (SIP) is found as a substantial application-layer protocol for the multimedia services. It is extensively used for managing, altering, terminating and distributing the multimedia sessions. Authentication plays a pivotal role in SIP environment. Currently, Lu et al. presented an authentication protocol for SIP and profess that newly proposed protocol is protected against all the familiar attacks. However, the detailed analysis describes that the Lu et al.'s protocol is exposed against server masquerading attack and user's masquerading attack. Moreover, it also fails to protect the user's identity as well as it possesses incorrect login and authentication phase. In order to establish a suitable and efficient protocol, having ability to overcome all these discrepancies, a robust ECC-based novel mutual authentication mechanism with anonymity for SIP is presented in this manuscript. The improved protocol contains an explicit parameter for user to cope the issues of security and correctness and is found to be more secure and relatively effective to protect the user's privacy, user's masquerading and server masquerading as it is verified through the comprehensive formal and informal security analysis.

A robust ECC based mutual authentication protocol with anonymity for session initiation protocol.

Directory of Open Access Journals (Sweden)

Zahid Mehmood

Full Text Available Over the past few years, Session Initiation Protocol (SIP is found as a substantial application-layer protocol for the multimedia services. It is extensively used for managing, altering, terminating and distributing the multimedia sessions. Authentication plays a pivotal role in SIP environment. Currently, Lu et al. presented an authentication protocol for SIP and profess that newly proposed protocol is protected against all the familiar attacks. However, the detailed analysis describes that the Lu et al.'s protocol is exposed against server masquerading attack and user's masquerading attack. Moreover, it also fails to protect the user's identity as well as it possesses incorrect login and authentication phase. In order to establish a suitable and efficient protocol, having ability to overcome all these discrepancies, a robust ECC-based novel mutual authentication mechanism with anonymity for SIP is presented in this manuscript. The improved protocol contains an explicit parameter for user to cope the issues of security and correctness and is found to be more secure and relatively effective to protect the user's privacy, user's masquerading and server masquerading as it is verified through the comprehensive formal and informal security analysis.

Virtualization in network and servers infrastructure to support dynamic system reconfiguration in ALMA

Science.gov (United States)

Shen, Tzu-Chiang; Ovando, Nicolás.; Bartsch, Marcelo; Simmond, Max; Vélez, Gastón; Robles, Manuel; Soto, Rubén.; Ibsen, Jorge; Saldias, Christian

2012-09-01

ALMA is the first astronomical project being constructed and operated under industrial approach due to the huge amount of elements involved. In order to achieve the maximum through put during the engineering and scientific commissioning phase, several production lines have been established to work in parallel. This decision required modification in the original system architecture in which all the elements are controlled and operated within a unique Standard Test Environment (STE). The advance in the network industry and together with the maturity of virtualization paradigm allows us to provide a solution which can replicate the STE infrastructure without changing their network address definition. This is only possible with Virtual Routing and Forwarding (VRF) and Virtual LAN (VLAN) concepts. The solution allows dynamic reconfiguration of antennas and other hardware across the production lines with minimum time and zero human intervention in the cabling. We also push the virtualization even further, classical rack mount servers are being replaced and consolidated by blade servers. On top of them virtualized server are centrally administrated with VMWare ESX. Hardware costs and system administration effort will be reduced considerably. This mechanism has been established and operated successfully during the last two years. This experience gave us confident to propose a solution to divide the main operation array into subarrays using the same concept which will introduce huge flexibility and efficiency for ALMA operation and eventually may simplify the complexity of ALMA core observing software since there will be no need to deal with subarrays complexity at software level.

Locating Nearby Copies of Replicated Internet Servers

National Research Council Canada - National Science Library

Guyton, James D; Schwartz, Michael F

1995-01-01

In this paper we consider the problem of choosing among a collection of replicated servers focusing on the question of how to make choices that segregate client/server traffic according to network topology...

GeoServer beginner's guide

CERN Document Server

Youngblood, Brian

2013-01-01

Step-by-step instructions are included and the needs of a beginner are totally satisfied by the book. The book consists of plenty of examples with accompanying screenshots and code for an easy learning curve. You are a web developer with knowledge of server side scripting, and have experience with installing applications on the server. You have a desire to want more than Google maps, by offering dynamically built maps on your site with your latest geospatial data stored in MySQL, PostGIS, MsSQL or Oracle. If this is the case, this book is meant for you.

Server hardware trends

CERN Multimedia

CERN. Geneva

2014-01-01

This talk will cover the status of the current and upcoming offers on server platforms, focusing mainly on the processing and storage parts. Alternative solutions like Open Compute (OCP) will be quickly covered.

On-line single server dial-a-ride problems

NARCIS (Netherlands)

Feuerstein, E.; Stougie, L.

1998-01-01

In this paper results on the dial-a-ride problem with a single server are presented. Requests for rides consist of two points in a metric space, a source and a destination. A ride has to be made by the server from the source to the destination. The server travels at unit speed in the metric space

Personalized Pseudonyms for Servers in the Cloud

OpenAIRE

Xiao Qiuyu; Reiter Michael K.; Zhang Yinqian

2017-01-01

A considerable and growing fraction of servers, especially of web servers, is hosted in compute clouds. In this paper we opportunistically leverage this trend to improve privacy of clients from network attackers residing between the clients and the cloud: We design a system that can be deployed by the cloud operator to prevent a network adversary from determining which of the cloud’s tenant servers a client is accessing. The core innovation in our design is a PoPSiCl (pronounced “popsicle”), ...

Towards Energy-Centric Computing and Computer Architecture

CERN Multimedia

CERN. Geneva

2010-01-01

Technology forecasts indicate that device scaling will continue well into the next decade.  Unfortunately, it is becoming extremely difficult to harness this increase in the number of transistors into performance due to a number of technological, circuit, architectural, methodological and  programming challenges.In this talk, I will argue that the key emerging showstopper is power.  Voltage scaling as a means to maintain a constant power envelope with an increase in transistor  numbers is hitting diminishing returns. As such, to continue riding the Moore's law we need to look  for drastic measures to cut power. This is definitely the case for server chips in future datacenters, where abundant server parallelism, redundancy and 3D chip integration are likely to remove  programming, reliability and bandwidth hurdles, leaving power as the only true limiter.I will present  results backing this argument based on validated models for f...

The Fermilab central computing facility architectural model

International Nuclear Information System (INIS)

Nicholls, J.

1989-01-01

The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front-end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS cluster interactive front-end, an Amdahl VM Computing engine, ACP farms, and (primarily) VMS workstations. This paper will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. (orig.)

The Fermilab Central Computing Facility architectural model

International Nuclear Information System (INIS)

Nicholls, J.

1989-05-01

The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS Cluster interactive front end, an Amdahl VM computing engine, ACP farms, and (primarily) VMS workstations. This presentation will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. 2 figs

Safety and immunogenicity of an oral DNA vaccine encoding Sip of Streptococcus agalactiae from Nile tilapia Oreochromis niloticus delivered by live attenuated Salmonella typhimurium.

Science.gov (United States)

Huang, L Y; Wang, K Y; Xiao, D; Chen, D F; Geng, Y; Wang, J; He, Y; Wang, E L; Huang, J L; Xiao, G Y

2014-05-01

Attenuated Salmonella typhimurium SL7207 was used as a carrier for a reconstructed DNA vaccine against Streptococcus agalactiae. A 1.02 kb DNA fragment, encoding for a portion of the surface immunogenic protein (Sip) of S. agalactiae was inserted into pVAX1. The recombinant plasmid pVAX1-sip was transfected in EPC cells to detect the transient expression by an indirect immunofluorescence assay, together with Western blot analysis. The pVAX1-sip was transformed by electroporation into SL7207. The stability of pVAX1-sip into Salmonella was over 90% after 50 generations with antibiotic selection in vitro while remained stable over 80% during 35 generations under antibiotic-free conditions. The LD50 of SL/pVAX1-sip was 1.7 × 10(11) CFU/fish by intragastric administration which indicated a quite low virulence. Tilapias were inoculated orally at 10(8) CFU/fish, the recombinant bacteria were found present in intestinal tract, spleens and livers and eventually eliminated from the tissues 4 weeks after immunization. Fish immunized at 10(7), 10(8) and 10(9) CFU/fish with different immunization times caused various levels of serum antibody and an effective protection against lethal challenge with the wild-type strain S. agalactiae. Integration studies showed that the pVAX1-sip did not integrate with tilapia chromosomes. The DNA vaccine SL/pVAX1-sip was proved to be safe and effective in protecting tilapias against S. agalactiae infection. Copyright © 2014 Elsevier Ltd. All rights reserved.

Securing SQL Server Protecting Your Database from Attackers

CERN Document Server

Cherry, Denny

2011-01-01

There is a lot at stake for administrators taking care of servers, since they house sensitive data like credit cards, social security numbers, medical records, and much more. In Securing SQL Server you will learn about the potential attack vectors that can be used to break into your SQL Server database, and how to protect yourself from these attacks. Written by a Microsoft SQL Server MVP, you will learn how to properly secure your database, from both internal and external threats. Best practices and specific tricks employed by the author will also be revealed. Learn expert techniques to protec

Web Server Configuration for an Academic Intranet

National Research Council Canada - National Science Library

Baltzis, Stamatios

2000-01-01

.... One of the factors that boosted this ability was the evolution of the Web Servers. Using the web server technology man can be connected and exchange information with the most remote places all over the...

Implementation of SRPT Scheduling in Web Servers

National Research Council Canada - National Science Library

Harchol-Balter, Mor

2000-01-01

.... Experiments use the Linux operating system and the Flash web server. All experiments are repeated under a range of server loads and under both trace-based workloads and those generated by a Web workload generator...

SSDL personel dosimetry system: migration from a client - server system into a web-based system

International Nuclear Information System (INIS)

Maizura Ibrahim; Rosnah Shariff; Ahmad Bazlie Abdul Kadir; John Konsoh Sangau; Mohd Amin Sharifuldin Salleh; Taiman Kadni; Noriah Mod Ali

2007-01-01

Personnel Dosimetry System has been used by the Secondary Standard Dosimetry Laboratory (SSDL), Nuclear Malaysia since ten years ago. The system is a computerized database system with a client-server concept. This system has been used by Film Badge Laboratory, SSDL to record details of clients, calculation of Film Badge dosage, management of radiation workers data's, generating of dosage report, retrieval of statistical reports regarding film badge usage for the purpose of reporting to monitoring bodies such as Atomic Energy Licensing Board (AELB), Ministry of Health and others. But, due to technical problems that frequently occurs, the system is going to be replaced by a newly developed web- based system called e-SSDL. This paper describe the problems that regularly occurs in the previous system, explains how the process of replacing the client-server system with a web-based system is done and the differences between the previous and current system. This paper will also present details architecture of the new system and the new process introduced in processing film badges. (Author)

Tandem queue with server slow-down

NARCIS (Netherlands)

Miretskiy, D.I.; Scheinhardt, W.R.W.; Mandjes, M.R.H.

2007-01-01

We study how rare events happen in the standard two-node tandem Jackson queue and in a generalization, the socalled slow-down network, see [2]. In the latter model the service rate of the first server depends on the number of jobs in the second queue: the first server slows down if the amount of

Characteristics and Energy Use of Volume Servers in the United States

Energy Technology Data Exchange (ETDEWEB)

Fuchs, H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shehabi, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ganeshalingam, M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Desroches, L. -B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lim, B. [Fraunhofer Center for Sustainable Energy Systems, Boston, MA (United States); Roth, K. [Fraunhofer Center for Sustainable Energy Systems, Boston, MA (United States); Tsao, A. [Navigant Consulting Inc., Chicago, IL (United States)

2017-11-01

Servers’ field energy use remains poorly understood, given heterogeneous computing loads, configurable hardware and software, and operation over a wide range of management practices. This paper explores various characteristics of 1- and 2-socket volume servers that affect energy consumption, and quantifies the difference in power demand between higher-performing SPEC and ENERGY STAR servers and our best understanding of a typical server operating today. We first establish general characteristics of the U.S. installed base of volume servers from existing IDC data and the literature, before presenting information on server hardware configurations from data collection events at a major online retail website. We then compare cumulative distribution functions of server idle power across three separate datasets and explain the differences between them via examination of the hardware characteristics to which power draw is most sensitive. We find that idle server power demand is significantly higher than ENERGY STAR benchmarks and the industry-released energy use documented in SPEC, and that SPEC server configurations—and likely the associated power-scaling trends—are atypical of volume servers. Next, we examine recent trends in server power draw among high-performing servers across their full load range to consider how representative these trends are of all volume servers before inputting weighted average idle power load values into a recently published model of national server energy use. Finally, we present results from two surveys of IT managers (n=216) and IT vendors (n=178) that illustrate the prevalence of more-efficient equipment and operational practices in server rooms and closets; these findings highlight opportunities to improve the energy efficiency of the U.S. server stock.

Environment server. Digital field information archival technology

International Nuclear Information System (INIS)

Kita, Nobuyuki; Kita, Yasuyo; Yang, Hai-quan

2002-01-01

For the safety operation of nuclear power plants, it is important to store various information about plants for a long period and visualize those stored information as desired. The system called Environment Server is developed for realizing it. In this paper, the general concepts of Environment Server is explained and its partial implementation for archiving the image information gathered by inspection mobile robots into virtual world and visualizing them is described. An extension of Environment Server for supporting attention sharing is also briefly introduced. (author)

Using blockchain to build trusted LoRaWAN sharing server

Directory of Open Access Journals (Sweden)

Jun Lin

2017-09-01

Full Text Available Purpose – With the rapid growth of the Internet of Things (IoT market and requirement, low power wide area (LPWA technologies have become popular. In various LPWA technologies, Narrow Band IoT (NB-IoT and long range (LoRa are two main leading competitive technologies. Compared with NB-IoT networks, which are mainly built and managed by mobile network operators, LoRa wide area networks (LoRaWAN are mainly operated by private companies or organizations, which suggests two issues: trust of the private network operators and lack of network coverage. This study aims to propose a conceptual architecture design of a blockchain built-in solution for LoRaWAN network servers to solve these two issues for LoRaWAN IoT solution. Design/methodology/approach – The study proposed modeling, model analysis and architecture design. Findings – The proposed solution uses the blockchain technology to build an open, trusted, decentralized and tamper-proof system, which provides the indisputable mechanism to verify that the data of a transaction has existed at a specific time in the network. Originality/value – To the best of our knowledge, this is the first work that integrates blockchain technology and LoRaWAN IoT technology.

Implementasi Cluster Server pada Raspberry Pi dengan Menggunakan Metode Load Balancing

Directory of Open Access Journals (Sweden)

Ridho Habi Putra

2016-06-01

Full Text Available Server merupakan bagian penting dalam sebuah layanan didalam jaringan komputer. Peran server dapat menentukan kualitas baik buruknya dari layanan tersebut. Kegagalan dari sebuah server bisa disebabkan oleh beberapa faktor diantaranya kerusakan perangkat keras, sistem jaringan serta aliran listrik. Salah satu solusi untuk mengatasi kegagalan server dalam suatu jaringan komputer adalah dengan melakukan clustering server.  Tujuan dari penelitian ini adalah untuk mengukur kemampuan Raspberry Pi (Raspi digunakan sebagai web server. Raspberry Pi yang digunakan menggunakan Raspberry Pi 2 Model B dengan menggunakan processor ARM Cortex-A7 berjalan pada frekuensi 900MHz dengan memiliki RAM 1GB. Sistem operasi yang digunakan pada Raspberry Pi adalah Linux Debian Wheezy. Konsep penelitian ini menggunakan empat buah perangkat Raspberry Pi dimana dua Raspi digunakan sebagai web server dan dua Raspi lainnya digunakan sebagai penyeimbang beban (Load Balancer serta database server. Metode yang digunakan dalam pembangunan cluster server ini menggunakan metode load balancing, dimana beban server bekerja secara merata di masing-masing node. Pengujian yang diterapkan dengan melakukan perbandingan kinerja dari Raspbery Pi yang menangani lalu lintas data secara tunggal tanpa menggunakan load balancer serta pengujian Raspberry Pi dengan menggunakan load balancer sebagai beban penyeimbang antara anggota cluster server.

Energy-Reduction Offloading Technique for Streaming Media Servers

Directory of Open Access Journals (Sweden)

Yeongpil Cho

2016-01-01

Full Text Available Recent growth in popularity of mobile video services raises a demand for one of the most popular and convenient methods of delivering multimedia data, video streaming. However, heterogeneity of currently existing mobile devices involves an issue of separate video transcoding for each type of mobile devices such as smartphones, tablet PCs, and smart TVs. As a result additional burden comes to media servers, which pretranscode multimedia data for number of clients. Regarding even higher increase of video data in the Internet in the future, the problem of media servers overload is impending. To struggle against the problem an offloading method is introduced in this paper. By the use of SorTube offloading framework video transcoding process is shifted from the centralized media server to the local offloading server. Thus, clients can receive personally customized video stream; meanwhile the overload of centralized servers is reduced.

The Development of Mobile Server for Language Courses

OpenAIRE

Tokumoto, Hiroko; Yoshida, Mitsunobu

2009-01-01

The aim of this paper is to introduce the conceptual design of the mobile server software "MY Server" for language teaching drafted by Tokumoto. It is to report how this software is designed and adopted effectively to Japanese language teaching. Most of the current server systems for education require facilities in a big scale including high-spec server machines, professional administrators, which naturally result in big budget projects that individual teachers or small size schools canno...

78 FR 68005 - Approval and Promulgation of Implementation Plans; Mississippi; Transportation Conformity SIP...

Science.gov (United States)

2013-11-13

...] Approval and Promulgation of Implementation Plans; Mississippi; Transportation Conformity SIP--Memorandum... transportation conformity criteria and procedures related to interagency consultation and enforceability of... conformity process to allow direct consultation among agencies at the Federal, state and local levels. This...

ADC interface for data server with data preselection for luminosity detector in AIDA-2020 project

Science.gov (United States)

Daniluk, W.; Dziedzic, B.; Korcyl, G.; Wojtoń, T.; Zawiejski, L.

2017-08-01

Main aim of the AIDA-2020 project is development of detectors for future accelerators. In FCAL Colaboration we are working on forward subdetectors for ILC and CLIC accelerators. My team is developing prototype module which receives data from ADC, provides the data preselection, and transmits them as packages to the data server for further their analysis. Common prototype is based on AC701 evaluation board which contains Artix-7 FPGA and is equipped with SMA connectors for gigabit transceivers and ethernet connector. In my talk I will describe architecture of the device and current state of module development.

Experimental Demonstration of a Self-organized Architecture for Emerging Grid Computing Applications on OBS Testbed

Science.gov (United States)

Liu, Lei; Hong, Xiaobin; Wu, Jian; Lin, Jintong

As Grid computing continues to gain popularity in the industry and research community, it also attracts more attention from the customer level. The large number of users and high frequency of job requests in the consumer market make it challenging. Clearly, all the current Client/Server(C/S)-based architecture will become unfeasible for supporting large-scale Grid applications due to its poor scalability and poor fault-tolerance. In this paper, based on our previous works [1, 2], a novel self-organized architecture to realize a highly scalable and flexible platform for Grids is proposed. Experimental results show that this architecture is suitable and efficient for consumer-oriented Grids.

A Scalable Communication Architecture for Advanced Metering Infrastructure

OpenAIRE

Ngo Hoang , Giang; Liquori , Luigi; Nguyen Chan , Hung

2013-01-01

Advanced Metering Infrastructure (AMI), seen as foundation for overall grid modernization, is an integration of many technologies that provides an intelligent connection between consumers and system operators [ami 2008]. One of the biggest challenge that AMI faces is to scalable collect and manage a huge amount of data from a large number of customers. In our paper, we address this challenge by introducing a mixed peer-to-peer (P2P) and client-server communication architecture for AMI in whic...

Getting started with SQL Server 2014 administration

CERN Document Server

Ellis, Gethyn

2014-01-01

This is an easytofollow handson tutorial that includes real world examples of SQL Server 2014's new features. Each chapter is explained in a stepbystep manner which guides you to implement the new technology.If you want to create an highly efficient database server then this book is for you. This book is for database professionals and system administrators who want to use the added features of SQL Server 2014 to create a hybrid environment, which is both highly available and allows you to get the best performance from your databases.

The Impact of Dopant Segregation on the Maximum Carrier Density in Si:P Multilayers.

Science.gov (United States)

Keizer, Joris G; McKibbin, Sarah R; Simmons, Michelle Y

2015-07-28

Abrupt dopant profiles and low resistivity are highly sought after qualities in the silicon microelectronics industry and, more recently, in the development of an all epitaxial Si:P based quantum computer. If we increase the active carrier density in silicon to the point where the material becomes superconducting, while maintaining a low thermal budget, it will be possible to fabricate nanoscale superconducting devices using the highly successful technique of depassivation lithography. In this work, we investigate the dopant profile and activation in multiple high density Si:P δ-layers fabricated by stacking individual layers with intervening silicon growth. We determine that dopant activation is ultimately limited by the formation of P-P dimers due to the segregation of dopants between multilayers. By increasing the encapsulation thickness between subsequent layers, thereby minimizing the formation of these deactivating defects, we are able to achieve an active carrier density of ns = 4.5 ×10(14) cm(-2) for a triple layer. The results of electrical characterization are combined with those of secondary ion mass spectroscopy to construct a model that accurately describes the impact of P segregation on the final active carrier density in Si:P multilayers. Our model predicts that a 3D active carrier density of 8.5 × 10(20) cm(-3) (1.7 atom %) can be achieved.

Locating Hidden Servers

National Research Council Canada - National Science Library

Oeverlier, Lasse; Syverson, Paul F

2006-01-01

.... Announced properties include server resistance to distributed DoS. Both the EFF and Reporters Without Borders have issued guides that describe using hidden services via Tor to protect the safety of dissidents as well as to resist censorship...

Energy-efficient server management; Energieeffizientes Servermanagement

Energy Technology Data Exchange (ETDEWEB)

Sauter, B.

2003-07-01

This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that aimed to develop an automatic shut-down system for the servers used in typical electronic data processing installations to be found in small and medium-sized enterprises. The purpose of shutting down these computers - the saving of energy - is discussed. The development of a shutdown unit on the basis of a web-server that automatically shuts down the servers connected to it and then interrupts their power supply is described. The functions of the unit, including pre-set times for switching on and off, remote operation via the Internet and its interaction with clients connected to it are discussed. Examples of the system's user interface are presented.

The Live Access Server Scientific Product Generation Through Workflow Orchestration

Science.gov (United States)

Hankin, S.; Calahan, J.; Li, J.; Manke, A.; O'Brien, K.; Schweitzer, R.

2006-12-01

The Live Access Server (LAS) is a well-established Web-application for display and analysis of geo-science data sets. The software, which can be downloaded and installed by anyone, gives data providers an easy way to establish services for their on-line data holdings, so their users can make plots; create and download data sub-sets; compare (difference) fields; and perform simple analyses. Now at version 7.0, LAS has been in operation since 1994. The current "Armstrong" release of LAS V7 consists of three components in a tiered architecture: user interface, workflow orchestration and Web Services. The LAS user interface (UI) communicates with the LAS Product Server via an XML protocol embedded in an HTTP "get" URL. Libraries (APIs) have been developed in Java, JavaScript and perl that can readily generate this URL. As a result of this flexibility it is common to find LAS user interfaces of radically different character, tailored to the nature of specific datasets or the mindset of specific users. When a request is received by the LAS Product Server (LPS -- the workflow orchestration component), business logic converts this request into a series of Web Service requests invoked via SOAP. These "back- end" Web services perform data access and generate products (visualizations, data subsets, analyses, etc.). LPS then packages these outputs into final products (typically HTML pages) via Jakarta Velocity templates for delivery to the end user. "Fine grained" data access is performed by back-end services that may utilize JDBC for data base access; the OPeNDAP "DAPPER" protocol; or (in principle) the OGC WFS protocol. Back-end visualization services are commonly legacy science applications wrapped in Java or Python (or perl) classes and deployed as Web Services accessible via SOAP. Ferret is the default visualization application used by LAS, though other applications such as Matlab, CDAT, and GrADS can also be used. Other back-end services may include generation of Google

Sipping test on a failed MTR fuel element

International Nuclear Information System (INIS)

Terremoto, Luis Antonio Albiac; Zeituni, Carlos Alberto; Silva, Antonio Teixeira e; Perrotta, Jose Augusto; Silva, Jose Eduardo Rosa da

2002-01-01

This work describes sipping tests performed on MTR fuel elements of the IEA-R1 research reactor, in order to determinate which one failed in the core during a routine operation of the reactor. radioactive iodine isotopes 131 I and 133 I, employed as failure indicators, were detected in samples corresponding to the fuel element IEA-156. The specific activity of each sample, as well as the average leaking rate, were measured for 137 Cs. The nuclear fuels U 3 O 8 - Al dispersion and U - Al alloy were compared concerning their measured average leaking rates of 137 Cs. (author)

Flux-Enabled Exploration of the Role of Sip1 in Galactose Yeast Metabolism

Directory of Open Access Journals (Sweden)

Christopher M. Shymansky

2017-05-01

Full Text Available 13C metabolic flux analysis (13C MFA is an important systems biology technique that has been used to investigate microbial metabolism for decades. The heterotrimer Snf1 kinase complex plays a key role in the preference Saccharomyces cerevisiae exhibits for glucose over galactose, a phenomenon known as glucose repression or carbon catabolite repression. The SIP1 gene, encoding a part of this complex, has received little attention, presumably, because its knockout lacks a growth phenotype. We present a fluxomic investigation of the relative effects of the presence of galactose in classically glucose-repressing media and/or knockout of SIP1 using a multi-scale variant of 13C MFA known as 2-Scale 13C metabolic flux analysis (2S-13C MFA. In this study, all strains have the galactose metabolism deactivated (gal1Δ background so as to be able to separate the metabolic effects purely related to glucose repression from those arising from galactose metabolism. The resulting flux profiles reveal that the presence of galactose in classically glucose-repressing conditions, for a CEN.PK113-7D gal1Δ background, results in a substantial decrease in pentose phosphate pathway (PPP flux and increased flow from cytosolic pyruvate and malate through the mitochondria toward cytosolic branched-chain amino acid biosynthesis. These fluxomic redistributions are accompanied by a higher maximum specific growth rate, both seemingly in violation of glucose repression. Deletion of SIP1 in the CEN.PK113-7D gal1Δ cells grown in mixed glucose/galactose medium results in a further increase. Knockout of this gene in cells grown in glucose-only medium results in no change in growth rate and a corresponding decrease in glucose and ethanol exchange fluxes and flux through pathways involved in aspartate/threonine biosynthesis. Glucose repression appears to be violated at a 1/10 ratio of galactose-to-glucose. Based on the scientific literature, we may have conducted our experiments

Solid waste information and tracking system client-server conversion project management plan

International Nuclear Information System (INIS)

May, D.L.

1998-01-01

This Project Management Plan is the lead planning document governing the proposed conversion of the Solid Waste Information and Tracking System (SWITS) to a client-server architecture. This plan presents the content specified by American National Standards Institute (ANSI)/Institute of Electrical and Electronics Engineers (IEEE) standards for software development, with additional information categories deemed to be necessary to describe the conversion fully. This plan is a living document that will be reviewed on a periodic basis and revised when necessary to reflect changes in baseline design concepts and schedules. This PMP describes the background, planning and management of the SWITS conversion. It does not constitute a statement of product requirements. Requirements and specification documentation needed for the SWITS conversion will be released as supporting documents

Security Mechanism Based on Hospital Authentication Server for Secure Application of Implantable Medical Devices

Directory of Open Access Journals (Sweden)

Chang-Seop Park

2014-01-01

Full Text Available After two recent security attacks against implantable medical devices (IMDs have been reported, the privacy and security risks of IMDs have been widely recognized in the medical device market and research community, since the malfunctioning of IMDs might endanger the patient’s life. During the last few years, a lot of researches have been carried out to address the security-related issues of IMDs, including privacy, safety, and accessibility issues. A physician accesses IMD through an external device called a programmer, for diagnosis and treatment. Hence, cryptographic key management between IMD and programmer is important to enforce a strict access control. In this paper, a new security architecture for the security of IMDs is proposed, based on a 3-Tier security model, where the programmer interacts with a Hospital Authentication Server, to get permissions to access IMDs. The proposed security architecture greatly simplifies the key management between IMDs and programmers. Also proposed is a security mechanism to guarantee the authenticity of the patient data collected from IMD and the nonrepudiation of the physician’s treatment based on it. The proposed architecture and mechanism are analyzed and compared with several previous works, in terms of security and performance.

Pro SQL Server 2012 relational database design and implementation

CERN Document Server

Davidson, Louis

2012-01-01

Learn effective and scalable database design techniques in a SQL Server environment. Pro SQL Server 2012 Relational Database Design and Implementation covers everything from design logic that business users will understand, all the way to the physical implementation of design in a SQL Server database. Grounded in best practices and a solid understanding of the underlying theory, Louis Davidson shows how to "get it right" in SQL Server database design and lay a solid groundwork for the future use of valuable business data. Gives a solid foundation in best practices and relational theory Covers

Foundations of SQL Server 2008 R2 Business Intelligence

CERN Document Server

Fouche, Guy

2011-01-01

Foundations of SQL Server 2008 R2 Business Intelligence introduces the entire exciting gamut of business intelligence tools included with SQL Server 2008. Microsoft has designed SQL Server 2008 to be more than just a database. It's a complete business intelligence (BI) platform. The database is at its core, and surrounding the core are tools for data mining, modeling, reporting, analyzing, charting, and integration with other enterprise-level software packages. SQL Server 2008 puts an incredible amount of BI functionality at your disposal. But how do you take advantage of it? That's what this

SOA based Data Architecture for HTML5 Web Applications

Directory of Open Access Journals (Sweden)

Catalin STRIMBEI

2013-01-01

Full Text Available Web Services based architectures have already been established as the preferred way to integrate SOA specific components, from the front-end to the back-end business services. One of the key elements of such architecture are data-based or entity services. In this context, SDO standard and SDO related technologies have been confirmed as a possible approach to aggregate such enterprise-wide federation of data services, mainly backed by database servers, but not limited to them. In the followings, we will discuss an architectural purpose based on SDO approach to seamlessly integrate presentation and data services within an enterprise SOA context. This way we will outline the benefits of a common end-to-end data integration strategy. Also, we will try to argue that using HTML5 based clients as front end services in conjunction with SDO data services could be an effective strategy to adopt the mobile computing in the enterprise context.

A Hybrid Web Browser Architecture for Mobile Devices

Directory of Open Access Journals (Sweden)

CHO, J.

2014-08-01

Full Text Available Web browsing on mobile networks is slow in comparison to wired or Wi-Fi networks. Particularly, the connection establishment phase including DNS lookups and TCP handshakes takes a long time on mobile networks due to its long round-trip latency. In this paper, we propose a novel web browser architecture that aims to improve mobile web browsing performance. Our approach delegates the connection establishment and HTTP header field delivery tasks to a dedicated proxy server located at the joint point between the WAN and mobile network. Since the traffic for the connection establishment and HTTP header fields delivery passes only through the WAN between the proxy and web servers, our approach significantly reduces both the number and size of packets on the mobile network. Our evaluation showed that the proposed scheme reduces the number of mobile network packets by up to 42% and, consequently, the average page loading time is shortened by up to 52%.

Building mail server on distributed computing system

International Nuclear Information System (INIS)

Akihiro Shibata; Osamu Hamada; Tomoko Oshikubo; Takashi Sasaki

2001-01-01

The electronic mail has become the indispensable function in daily job, and the server stability and performance are required. Using DCE and DFS we have built the distributed electronic mail sever, that is, servers such as SMTP, IMAP are distributed symmetrically, and provides the seamless access

Performance Analysis of Cloud Computing Architectures Using Discrete Event Simulation

Science.gov (United States)

Stocker, John C.; Golomb, Andrew M.

2011-01-01

Cloud computing offers the economic benefit of on-demand resource allocation to meet changing enterprise computing needs. However, the flexibility of cloud computing is disadvantaged when compared to traditional hosting in providing predictable application and service performance. Cloud computing relies on resource scheduling in a virtualized network-centric server environment, which makes static performance analysis infeasible. We developed a discrete event simulation model to evaluate the overall effectiveness of organizations in executing their workflow in traditional and cloud computing architectures. The two part model framework characterizes both the demand using a probability distribution for each type of service request as well as enterprise computing resource constraints. Our simulations provide quantitative analysis to design and provision computing architectures that maximize overall mission effectiveness. We share our analysis of key resource constraints in cloud computing architectures and findings on the appropriateness of cloud computing in various applications.

Professional Team Foundation Server 2012

CERN Document Server

Blankenship, Ed; Holliday, Grant; Keller, Brian

2012-01-01

A comprehensive guide to using Microsoft Team Foundation Server 2012 Team Foundation Server has become the leading Microsoft productivity tool for software management, and this book covers what developers need to know to use it effectively. Fully revised for the new features of TFS 2012, it provides developers and software project managers with step-by-step instructions and even assists those who are studying for the TFS 2012 certification exam. You'll find a broad overview of TFS, thorough coverage of core functions, a look at extensibility options, and more, written by Microsoft ins

Professional Team Foundation Server 2010

CERN Document Server

Blankenship, Ed; Holliday, Grant; Keller, Brian

2011-01-01

Authoritative guide to TFS 2010 from a dream team of Microsoft insiders and MVPs!Microsoft Visual Studio Team Foundation Server (TFS) has evolved until it is now an essential tool for Microsoft?s Application Lifestyle Management suite of productivity tools, enabling collaboration within and among software development teams. By 2011, TFS will replace Microsoft?s leading source control system, VisualSourceSafe, resulting in an even greater demand for information about it. Professional Team Foundation Server 2010, written by an accomplished team of Microsoft insiders and Microsoft MVPs, provides

IBM WebSphere Application Server 80 Administration Guide

CERN Document Server

Robinson, Steve

2011-01-01

IBM WebSphere Application Server 8.0 Administration Guide is a highly practical, example-driven tutorial. You will be introduced to WebSphere Application Server 8.0, and guided through configuration, deployment, and tuning for optimum performance. If you are an administrator who wants to get up and running with IBM WebSphere Application Server 8.0, then this book is not to be missed. Experience with WebSphere and Java would be an advantage, but is not essential.

A polling model with an autonomous server

NARCIS (Netherlands)

de Haan, Roland; Boucherie, Richardus J.; van Ommeren, Jan C.W.

2009-01-01

This paper considers polling systems with an autonomous server that remain at a queue for an exponential amount of time before moving to a next queue incurring a generally distributed switch-over time. The server remains at a queue until the exponential visit time expires, also when the queue

Single-server queues with spatially distributed arrivals

NARCIS (Netherlands)

Kroese, Dirk; Schmidt, Volker

1994-01-01

Consider a queueing system where customers arrive at a circle according to a homogeneous Poisson process. After choosing their positions on the circle, according to a uniform distribution, they wait for a single server who travels on the circle. The server's movement is modelled by a Brownian motion

Evaluation of the Intel Nehalem-EX server processor

CERN Document Server

Jarp, S; Leduc, J; Nowak, A; CERN. Geneva. IT Department

2010-01-01

In this paper we report on a set of benchmark results recently obtained by the CERN openlab by comparing the 4-socket, 32-core Intel Xeon X7560 server with the previous generation 4-socket server, based on the Xeon X7460 processor. The Xeon X7560 processor represents a major change in many respects, especially the memory sub-system, so it was important to make multiple comparisons. In most benchmarks the two 4-socket servers were compared. It should be underlined that both servers represent the “top of the line” in terms of frequency. However, in some cases, it was important to compare systems that integrated the latest processor features, such as QPI links, Symmetric multithreading and over-clocking via Turbo mode, and in such situations the X7560 server was compared to a dual socket L5520 based system with an identical frequency of 2.26 GHz. Before summarizing the results we must stress the fact that benchmarking of modern processors is a very complex affair. One has to control (at least) the following ...

Client/server models for transparent, distributed computational resources

International Nuclear Information System (INIS)

Hammer, K.E.; Gilman, T.L.

1991-01-01

Client/server models are proposed to address issues of shared resources in a distributed, heterogeneous UNIX environment. Recent development of automated Remote Procedure Call (RPC) interface generator has simplified the development of client/server models. Previously, implementation of the models was only possible at the UNIX socket level. An overview of RPCs and the interface generator will be presented and will include a discussion of generation and installation of remote services, the RPC paradigm, and the three levels of RPC programming. Two applications, the Nuclear Plant Analyzer (NPA) and a fluids simulation using molecular modelling, will be presented to demonstrate how client/server models using RPCs and External Data Representations (XDR) have been used production/computation situations. The NPA incorporates a client/server interface for transferring/translation of TRAC or RELAP results from the UNICOS Cray to a UNIX workstation. The fluids simulation program utilizes the client/server model to access the Cray via a single function allowing it to become a shared co-processor to the workstation application. 5 refs., 6 figs

Assessment of SIP Buildings for Sustainable Development in Rural China Using AHP-Grey Correlation Analysis.

Science.gov (United States)

Bai, Libiao; Wang, Hailing; Shi, Chunming; Du, Qiang; Li, Yi

2017-10-25

Traditional rural residential construction has the problems of high energy consumption and severe pollution. In general, with sustainable development in the construction industry, rural residential construction should be aimed towards low energy consumption and low carbon emissions. To help achieve this objective, in this paper, we evaluated four different possible building structures using AHP-Grey Correlation Analysis, which consists of the Analytic Hierarchy Process (AHP) and the Grey Correlation Analysis. The four structures included the traditional and currently widely used brick and concrete structure, as well as structure insulated panels (SIPs). Comparing the performances of economic benefit and carbon emission, the conclusion that SIPs have the best overall performance can be obtained, providing a reference to help builders choose the most appropriate building structure in rural China.

Analysis of an M|G|1|R queue with batch arrivals and two hysteretic overload control policies

Directory of Open Access Journals (Sweden)

Gaidamaka Yuliya

2014-09-01

Full Text Available Hysteretic control of arrivals is one of the most easy-to-implement and effective solutions of overload problems occurring in SIP-servers. A mathematical model of an SIP server based on the queueing system M[X]|G|1(L,H|(H,R with batch arrivals and two hysteretic loops is being analyzed. This paper proposes two analytical methods for studying performance characteristics related to the number of customers in the system. Two control policies defined by instants when it is decided to change the system’s mode are considered. The expression for an important performance characteristic of each policy (the mean time between changes in the system mode is presented. Numerical examples that allow comparison of the efficiency of both policies are given

Single-server blind quantum computation with quantum circuit model

Science.gov (United States)

Zhang, Xiaoqian; Weng, Jian; Li, Xiaochun; Luo, Weiqi; Tan, Xiaoqing; Song, Tingting

2018-06-01

Blind quantum computation (BQC) enables the client, who has few quantum technologies, to delegate her quantum computation to a server, who has strong quantum computabilities and learns nothing about the client's quantum inputs, outputs and algorithms. In this article, we propose a single-server BQC protocol with quantum circuit model by replacing any quantum gate with the combination of rotation operators. The trap quantum circuits are introduced, together with the combination of rotation operators, such that the server is unknown about quantum algorithms. The client only needs to perform operations X and Z, while the server honestly performs rotation operators.

Experience on wet storage spent fuel sipping at IEA-R1 Brazilian research reactor

International Nuclear Information System (INIS)

Perrotta, J.A.; Terremoto, L.A.A.; Zeituni, C.A.

1998-01-01

The IEA-R1 research reactor of the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP) is a pool type reactor of B and W design, that has been operating since 1957 at a power of 2 MW. Irradiated (spent) fuels have been stored at the facility during the various years of operation. At present there are 40 spent fuel assemblies at dry storage, 79 spent fuel assemblies at wet storage and 30 fuel assemblies in the core. The oldest fuels are of United States origin, made with U-Al alloy, both of LEU and HEU MTR fuel type. Many of these fuel assemblies have corrosion pits along their lateral fuel plates. These pits originate by galvanic corrosion between the fuel plate and the stainless steel storage racks. As a consequence of the possibility of sending the irradiated old fuels back the U.S.A., sipping tests were performed with the spent fuel assemblies. The reason for this was to evaluate their 137 Cs leaking rate, if any. This work describes the procedure and methodology used to perform the sipping tests with the fuel assemblies at the storage pool, and presents the results obtained for the 137 Cs sipping water activity for each fuel assembly. A correlation is made between the corrosion pits and the activity values measured. A 137 Cs leaking rate is determined and compared to the criteria established for canning spent fuel assemblies before shipment

CPU Server

CERN Multimedia

The CERN computer centre has hundreds of racks like these. They are over a million times more powerful than our first computer in the 1960's. This tray is a 'dual-core' server. This means it effectively has two CPUs in it (eg. two of your home computers minimised to fit into a single box). Also note the copper cooling fins, to help dissipate the heat.

A tandem queue with delayed server release

NARCIS (Netherlands)

Nawijn, W.M.

1997-01-01

We consider a tandem queue with two stations. The rst station is an s-server queue with Poisson arrivals and exponential service times. After terminating his service in the rst station, a customer enters the second station to require service at an exponential single server, while in the meantime he

Scaling of ion implanted Si:P single electron devices

International Nuclear Information System (INIS)

Escott, C C; Hudson, F E; Chan, V C; Petersson, K D; Clark, R G; Dzurak, A S

2007-01-01

We present a modelling study on the scaling prospects for phosphorus in silicon (Si:P) single electron devices using readily available commercial and free-to-use software. The devices comprise phosphorus ion implanted, metallically doped (n + ) dots (size range 50-500 nm) with source and drain reservoirs. Modelling results are compared to measurements on fabricated devices and discussed in the context of scaling down to few-electron structures. Given current fabrication constraints, we find that devices with 70-75 donors per dot should be realizable. We comment on methods for further reducing this number

Scaling of ion implanted Si:P single electron devices

Energy Technology Data Exchange (ETDEWEB)

Escott, C C [Centre for Quantum Computer Technology, School of Electrical Engineering and Telecommunications, UNSW, Sydney, NSW 2052 (Australia); Hudson, F E [Centre for Quantum Computer Technology, School of Electrical Engineering and Telecommunications, UNSW, Sydney, NSW 2052 (Australia); Chan, V C [Centre for Quantum Computer Technology, School of Electrical Engineering and Telecommunications, UNSW, Sydney, NSW 2052 (Australia); Petersson, K D [Centre for Quantum Computer Technology, School of Electrical Engineering and Telecommunications, UNSW, Sydney, NSW 2052 (Australia); Clark, R G [Centre for Quantum Computer Technology, School of Physics, UNSW, Sydney, 2052 (Australia); Dzurak, A S [Centre for Quantum Computer Technology, School of Electrical Engineering and Telecommunications, UNSW, Sydney, NSW 2052 (Australia)

2007-06-13

We present a modelling study on the scaling prospects for phosphorus in silicon (Si:P) single electron devices using readily available commercial and free-to-use software. The devices comprise phosphorus ion implanted, metallically doped (n{sup +}) dots (size range 50-500 nm) with source and drain reservoirs. Modelling results are compared to measurements on fabricated devices and discussed in the context of scaling down to few-electron structures. Given current fabrication constraints, we find that devices with 70-75 donors per dot should be realizable. We comment on methods for further reducing this number.

Design and implementation of streaming media server cluster based on FFMpeg.

Science.gov (United States)

Zhao, Hong; Zhou, Chun-long; Jin, Bao-zhao

2015-01-01

Poor performance and network congestion are commonly observed in the streaming media single server system. This paper proposes a scheme to construct a streaming media server cluster system based on FFMpeg. In this scheme, different users are distributed to different servers according to their locations and the balance among servers is maintained by the dynamic load-balancing algorithm based on active feedback. Furthermore, a service redirection algorithm is proposed to improve the transmission efficiency of streaming media data. The experiment results show that the server cluster system has significantly alleviated the network congestion and improved the performance in comparison with the single server system.

Design and Implementation of Streaming Media Server Cluster Based on FFMpeg

Science.gov (United States)

Zhao, Hong; Zhou, Chun-long; Jin, Bao-zhao

2015-01-01

Poor performance and network congestion are commonly observed in the streaming media single server system. This paper proposes a scheme to construct a streaming media server cluster system based on FFMpeg. In this scheme, different users are distributed to different servers according to their locations and the balance among servers is maintained by the dynamic load-balancing algorithm based on active feedback. Furthermore, a service redirection algorithm is proposed to improve the transmission efficiency of streaming media data. The experiment results show that the server cluster system has significantly alleviated the network congestion and improved the performance in comparison with the single server system. PMID:25734187

Security Analysis System to Detect Threats on a SIP VoIP Infrasctructure Elements

Directory of Open Access Journals (Sweden)

Filip Rezac

2011-01-01

Full Text Available SIP PBX is definitely the alpha and omega of any IP telephony infrastructure and frequently also provides other services than those related to VoIP traffic. These exchanges are, however, very often the target of attacks by external actors. The article describes a system that was developed on VSB-TU Ostrava as a testing tool to verify if the target VoIP PBX is adequately secured and protected against any real threats. The system tests the SIP element for several usually occurring attacks and it compiles evaluation of its overall security on the basis of successfully or unsuccessfully penetrations. The article describes the applications and algorithms that are used by system and the conclusion consists recommendations and guidelines to ensure effective protection against VoIP PBX threats. The system is designed as an open-source web application, thus allowing independent access and is fully extensible to other test modules.

Architectural Implications for Spatial Object Association Algorithms*

Science.gov (United States)

Kumar, Vijay S.; Kurc, Tahsin; Saltz, Joel; Abdulla, Ghaleb; Kohn, Scott R.; Matarazzo, Celeste

2013-01-01

Spatial object association, also referred to as crossmatch of spatial datasets, is the problem of identifying and comparing objects in two or more datasets based on their positions in a common spatial coordinate system. In this work, we evaluate two crossmatch algorithms that are used for astronomical sky surveys, on the following database system architecture configurations: (1) Netezza Performance Server®, a parallel database system with active disk style processing capabilities, (2) MySQL Cluster, a high-throughput network database system, and (3) a hybrid configuration consisting of a collection of independent database system instances with data replication support. Our evaluation provides insights about how architectural characteristics of these systems affect the performance of the spatial crossmatch algorithms. We conducted our study using real use-case scenarios borrowed from a large-scale astronomy application known as the Large Synoptic Survey Telescope (LSST). PMID:25692244

PockDrug-Server: a new web server for predicting pocket druggability on holo and apo proteins.

Science.gov (United States)

Hussein, Hiba Abi; Borrel, Alexandre; Geneix, Colette; Petitjean, Michel; Regad, Leslie; Camproux, Anne-Claude

2015-07-01

Predicting protein pocket's ability to bind drug-like molecules with high affinity, i.e. druggability, is of major interest in the target identification phase of drug discovery. Therefore, pocket druggability investigations represent a key step of compound clinical progression projects. Currently computational druggability prediction models are attached to one unique pocket estimation method despite pocket estimation uncertainties. In this paper, we propose 'PockDrug-Server' to predict pocket druggability, efficient on both (i) estimated pockets guided by the ligand proximity (extracted by proximity to a ligand from a holo protein structure) and (ii) estimated pockets based solely on protein structure information (based on amino atoms that form the surface of potential binding cavities). PockDrug-Server provides consistent druggability results using different pocket estimation methods. It is robust with respect to pocket boundary and estimation uncertainties, thus efficient using apo pockets that are challenging to estimate. It clearly distinguishes druggable from less druggable pockets using different estimation methods and outperformed recent druggability models for apo pockets. It can be carried out from one or a set of apo/holo proteins using different pocket estimation methods proposed by our web server or from any pocket previously estimated by the user. PockDrug-Server is publicly available at: http://pockdrug.rpbs.univ-paris-diderot.fr. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Transitioning to Intel-based Linux Servers in the Payload Operations Integration Center

Science.gov (United States)

Guillebeau, P. L.

2004-01-01

The MSFC Payload Operations Integration Center (POIC) is the focal point for International Space Station (ISS) payload operations. The POIC contains the facilities, hardware, software and communication interface necessary to support payload operations. ISS ground system support for processing and display of real-time spacecraft and telemetry and command data has been operational for several years. The hardware components were reaching end of life and vendor costs were increasing while ISS budgets were becoming severely constrained. Therefore it has been necessary to migrate the Unix portions of our ground systems to commodity priced Intel-based Linux servers. hardware architecture including networks, data storage, and highly available resources. This paper will concentrate on the Linux migration implementation for the software portion of our ground system. The migration began with 3.5 million lines of code running on Unix platforms with separate servers for telemetry, command, Payload information management systems, web, system control, remote server interface and databases. The Intel-based system is scheduled to be available for initial operational use by August 2004 The overall migration to Intel-based Linux servers in the control center involves changes to the This paper will address the Linux migration study approach including the proof of concept, criticality of customer buy-in and importance of beginning with POSlX compliant code. It will focus on the development approach explaining the software lifecycle. Other aspects of development will be covered including phased implementation, interim milestones and metrics measurements and reporting mechanisms. This paper will also address the testing approach covering all levels of testing including development, development integration, IV&V, user beta testing and acceptance testing. Test results including performance numbers compared with Unix servers will be included. need for a smooth transition while maintaining

Construction of a nuclear data server using TCP/IP

Energy Technology Data Exchange (ETDEWEB)

Kawano, Toshihiko; Sakai, Osamu [Kyushu Univ., Fukuoka (Japan)

1997-03-01

We construct a nuclear data server which provides data in the evaluated nuclear data library through the network by means of TCP/IP. The client is not necessarily a user but a computer program. Two examples with a prototype server program are demonstrated, the first is data transfer from the server to a user, and the second is to a computer program. (author)

iELM—a web server to explore short linear motif-mediated interactions

Science.gov (United States)

Weatheritt, Robert J.; Jehl, Peter; Dinkel, Holger; Gibson, Toby J.

2012-01-01

The recent expansion in our knowledge of protein–protein interactions (PPIs) has allowed the annotation and prediction of hundreds of thousands of interactions. However, the function of many of these interactions remains elusive. The interactions of Eukaryotic Linear Motif (iELM) web server provides a resource for predicting the function and positional interface for a subset of interactions mediated by short linear motifs (SLiMs). The iELM prediction algorithm is based on the annotated SLiM classes from the Eukaryotic Linear Motif (ELM) resource and allows users to explore both annotated and user-generated PPI networks for SLiM-mediated interactions. By incorporating the annotated information from the ELM resource, iELM provides functional details of PPIs. This can be used in proteomic analysis, for example, to infer whether an interaction promotes complex formation or degradation. Furthermore, details of the molecular interface of the SLiM-mediated interactions are also predicted. This information is displayed in a fully searchable table, as well as graphically with the modular architecture of the participating proteins extracted from the UniProt and Phospho.ELM resources. A network figure is also presented to aid the interpretation of results. The iELM server supports single protein queries as well as large-scale proteomic submissions and is freely available at http://i.elm.eu.org. PMID:22638578

Considerations for control system software verification and validation specific to implementations using distributed processor architectures

International Nuclear Information System (INIS)

Munro, J.K. Jr.

1993-01-01

Until recently, digital control systems have been implemented on centralized processing systems to function in one of several ways: (1) as a single processor control system; (2) as a supervisor at the top of a hierarchical network of multiple processors; or (3) in a client-server mode. Each of these architectures uses a very different set of communication protocols. The latter two architectures also belong to the category of distributed control systems. Distributed control systems can have a central focus, as in the cases just cited, or be quite decentralized in a loosely coupled, shared responsibility arrangement. This last architecture is analogous to autonomous hosts on a local area network. Each of the architectures identified above will have a different set of architecture-associated issues to be addressed in the verification and validation activities during software development. This paper summarizes results of efforts to identify, describe, contrast, and compare these issues

Coupled RNA-SIP and metatranscriptomics of active chemolithoautotrophic communities at a deep-sea hydrothermal vent.

Science.gov (United States)

Fortunato, Caroline S; Huber, Julie A

2016-08-01

The chemolithoautotrophic microbial community of the rocky subseafloor potentially provides a large amount of organic carbon to the deep ocean, yet our understanding of the activity and metabolic complexity of subseafloor organisms remains poorly described. A combination of metagenomic, metatranscriptomic, and RNA stable isotope probing (RNA-SIP) analyses were used to identify the metabolic potential, expression patterns, and active autotrophic bacteria and archaea and their pathways present in low-temperature hydrothermal fluids from Axial Seamount, an active submarine volcano. Metagenomic and metatranscriptomic results showed the presence of genes and transcripts for sulfur, hydrogen, and ammonium oxidation, oxygen respiration, denitrification, and methanogenesis, as well as multiple carbon fixation pathways. In RNA-SIP experiments across a range of temperatures under reducing conditions, the enriched (13)C fractions showed differences in taxonomic and functional diversity. At 30 °C and 55 °C, Epsilonproteobacteria were dominant, oxidizing hydrogen and primarily reducing nitrate. Methanogenic archaea were also present at 55 °C, and were the only autotrophs present at 80 °C. Correspondingly, the predominant CO2 fixation pathways changed from the reductive tricarboxylic acid (rTCA) cycle to the reductive acetyl-CoA pathway with increasing temperature. By coupling RNA-SIP with meta-omics, this study demonstrates the presence and activity of distinct chemolithoautotrophic communities across a thermal gradient of a deep-sea hydrothermal vent.

APLIKASI SERVER VIRTUAL IP UNTUK MIKROKONTROLER

OpenAIRE

Ashari, Ahmad

2008-01-01

Selama ini mikrokontroler yang terhubung ke satu komputer hanya dapat diakses melalui satu IP saja, padahal kebanyakan sistem operasi sekarang dapat memperjanjikan lebih dari satu IP untuk setiap komputer dalam bentuk virtual IP. Penelitian ini mengkaji pemanfaatan virtual IP dari IP aliasing pada sistem operasi Linux sebagai Server Virtual IP untuk mikrokontroler. Prinsip dasar Server Virtual IP adalah pembuatan Virtual Host pada masing-masing IP untuk memproses paket-paket data dan menerjem...

LiveBench-1: continuous benchmarking of protein structure prediction servers.

Science.gov (United States)

Bujnicki, J M; Elofsson, A; Fischer, D; Rychlewski, L

2001-02-01

We present a novel, continuous approach aimed at the large-scale assessment of the performance of available fold-recognition servers. Six popular servers were investigated: PDB-Blast, FFAS, T98-lib, GenTHREADER, 3D-PSSM, and INBGU. The assessment was conducted using as prediction targets a large number of selected protein structures released from October 1999 to April 2000. A target was selected if its sequence showed no significant similarity to any of the proteins previously available in the structural database. Overall, the servers were able to produce structurally similar models for one-half of the targets, but significantly accurate sequence-structure alignments were produced for only one-third of the targets. We further classified the targets into two sets: easy and hard. We found that all servers were able to find the correct answer for the vast majority of the easy targets if a structurally similar fold was present in the server's fold libraries. However, among the hard targets--where standard methods such as PSI-BLAST fail--the most sensitive fold-recognition servers were able to produce similar models for only 40% of the cases, half of which had a significantly accurate sequence-structure alignment. Among the hard targets, the presence of updated libraries appeared to be less critical for the ranking. An "ideally combined consensus" prediction, where the results of all servers are considered, would increase the percentage of correct assignments by 50%. Each server had a number of cases with a correct assignment, where the assignments of all the other servers were wrong. This emphasizes the benefits of considering more than one server in difficult prediction tasks. The LiveBench program (http://BioInfo.PL/LiveBench) is being continued, and all interested developers are cordially invited to join.

Getting started with SQL Server 2012 cube development

CERN Document Server

Lidberg, Simon

2013-01-01

As a practical tutorial for Analysis Services, get started with developing cubes. ""Getting Started with SQL Server 2012 Cube Development"" walks you through the basics, working with SSAS to build cubes and get them up and running.Written for SQL Server developers who have not previously worked with Analysis Services. It is assumed that you have experience with relational databases, but no prior knowledge of cube development is required. You need SQL Server 2012 in order to follow along with the exercises in this book.

78 FR 22827 - Approval and Promulgation of Implementation Plans; State of Kansas; Infrastructure SIP...

Science.gov (United States)

2013-04-17

... strategies to reduce air pollution. Based upon review of the state's infrastructure SIP submissions for the... revisions; (I) Nonattainment areas; (J) Consultation with government officials, public notification... pollution with the Secretary of Health and Environment (``Secretary''). The Secretary in turn administers...

An Electronic Healthcare Record Server Implemented in PostgreSQL

Directory of Open Access Journals (Sweden)

Tony Austin

2015-01-01

Full Text Available This paper describes the implementation of an Electronic Healthcare Record server inside a PostgreSQL relational database without dependency on any further middleware infrastructure. The five-part international standard for communicating healthcare records (ISO EN 13606 is used as the information basis for the design of the server. We describe some of the features that this standard demands that are provided by the server, and other areas where assumptions about the durability of communications or the presence of middleware lead to a poor fit. Finally, we discuss the use of the server in two real-world scenarios including a commercial application.

Client Server design and implementation issues in the Accelerator Control System environment

International Nuclear Information System (INIS)

Sathe, S.; Hoff, L.; Clifford, T.

1995-01-01

In distributed system communication software design, the Client Server model has been widely used. This paper addresses the design and implementation issues of such a model, particularly when used in Accelerator Control Systems. in designing the Client Server model one needs to decide how the services will be defined for a server, what types of messages the server will respond to, which data formats will be used for the network transactions and how the server will be located by the client. Special consideration needs to be given to error handling both on the server and client side. Since the server usually is located on a machine other than the client, easy and informative server diagnostic capability is required. The higher level abstraction provided by the Client Server model simplifies the application writing, however fine control over network parameters is essential to improve the performance. Above mentioned design issues and implementation trade-offs are discussed in this paper

eSIP: A Novel Solution-Based Sectioned Image Property Approach for Microscope Calibration.

Directory of Open Access Journals (Sweden)

Malte Butzlaff

Full Text Available Fluorescence confocal microscopy represents one of the central tools in modern sciences. Correspondingly, a growing amount of research relies on the development of novel microscopic methods. During the last decade numerous microscopic approaches were developed for the investigation of various scientific questions. Thereby, the former qualitative imaging methods became replaced by advanced quantitative methods to gain more and more information from a given sample. However, modern microscope systems being as complex as they are, require very precise and appropriate calibration routines, in particular when quantitative measurements should be compared over longer time scales or between different setups. Multispectral beads with sub-resolution size are often used to describe the point spread function and thus the optical properties of the microscope. More recently, a fluorescent layer was utilized to describe the axial profile for each pixel, which allows a spatially resolved characterization. However, fabrication of a thin fluorescent layer with matching refractive index is technically not solved yet. Therefore, we propose a novel type of calibration concept for sectioned image property (SIP measurements which is based on fluorescent solution and makes the calibration concept available for a broader number of users. Compared to the previous approach, additional information can be obtained by application of this extended SIP chart approach, including penetration depth, detected number of photons, and illumination profile shape. Furthermore, due to the fit of the complete profile, our method is less susceptible to noise. Generally, the extended SIP approach represents a simple and highly reproducible method, allowing setup independent calibration and alignment procedures, which is mandatory for advanced quantitative microscopy.

On a Batch Arrival Queuing System Equipped with a Stand-by Server during Vacation Periods or the Repairs Times of the Main Server

Directory of Open Access Journals (Sweden)

Rehab F. Khalaf

2011-01-01

Full Text Available We study a queuing system which is equipped with a stand-by server in addition to the main server. The stand-by server provides service to customers only during the period of absence of the main server when either the main server is on a vacation or it is in the state of repairs due to a sudden failure from time to time. The service times, vacation times, and repair times are assumed to follow general arbitrary distributions while the stand-by service times follow exponential distribution. Supplementary variables technique has been used to obtain steady state results in explicit and closed form in terms of the probability generating functions for the number of customers in the queue, the average number of customers, and the average waiting time in the queue while the MathCad software has been used to illustrate the numerical results in this work.

Comparison of Certification Authority Roles in Windows Server 2003 and Windows Server 2008

Directory of Open Access Journals (Sweden)

A. I. Luchnik

2011-03-01

Full Text Available An analysis of Certification Authority components of Microsoft server operating systems was conducted. Based on the results main directions of development of certification authorities and PKI were highlighted.

Usable Authentication with an Offline Trusted Device Proxy Architecture (long version)

OpenAIRE

Johansen, Christian; Jøsang, Audun; Migdal, Denis

2016-01-01

Client platform infection poses a significant threat to secure user authentication. Com- bining vulnerable client platforms with special security devices, as often the case in e- banking, can increase significantly the security. This paper describes a new architecture where a security proxy on the client platform communicates with both a trusted security device and the server application. The proxy switches between two TLS channels, one from the client and another from the trusted device. The...

SIP-Based Single Neuron Stochastic Predictive Control for Non-Gaussian Networked Control Systems with Uncertain Metrology Delays

Directory of Open Access Journals (Sweden)

Xinying Xu

2018-06-01

Full Text Available In this paper, a novel data-driven single neuron predictive control strategy is proposed for non-Gaussian networked control systems with metrology delays in the information theory framework. Firstly, survival information potential (SIP, instead of minimum entropy, is used to formulate the performance index to characterize the randomness of the considered systems, which is calculated by oversampling method. Then the minimum values can be computed by optimizing the SIP-based performance index. Finally, the proposed strategy, minimum entropy method and mean square error (MSE are applied to a networked motor control system, and results demonstrated the effectiveness of the proposed strategy.

The SMARTCyp cytochrome P450 metabolism prediction server

DEFF Research Database (Denmark)

Rydberg, Patrik; Gloriam, David Erik Immanuel; Olsen, Lars

2010-01-01

The SMARTCyp server is the first web application for site of metabolism prediction of cytochrome P450-mediated drug metabolism.......The SMARTCyp server is the first web application for site of metabolism prediction of cytochrome P450-mediated drug metabolism....

Analisis Algoritma Pergantian Cache Pada Proxy Web Server Internet Dengan Simulasi

OpenAIRE

Nurwarsito, Heru

2007-01-01

Pertumbuhan jumlah client internet dari waktu ke waktu terus bertambah, maka respon akses internet menjadi semakin lambat. Untuk membantu kecepatan akses tersebut maka diperlukan cache pada Proxy Server. Penelitian ini bertujuan untuk menganalisis performansi Proxy Server pada Jaringan Internet terhadap penggunaan algoritma pergantian cache-nya.Analisis Algoritma Pergantian Cache Pada Proxy Server didesain dengan metoda pemodelan simulasi jaringan internet yang terdiri dari Web server, Proxy ...

SciServer Compute brings Analysis to Big Data in the Cloud

Science.gov (United States)

Raddick, Jordan; Medvedev, Dmitry; Lemson, Gerard; Souter, Barbara

2016-06-01

SciServer Compute uses Jupyter Notebooks running within server-side Docker containers attached to big data collections to bring advanced analysis to big data "in the cloud." SciServer Compute is a component in the SciServer Big-Data ecosystem under development at JHU, which will provide a stable, reproducible, sharable virtual research environment.SciServer builds on the popular CasJobs and SkyServer systems that made the Sloan Digital Sky Survey (SDSS) archive one of the most-used astronomical instruments. SciServer extends those systems with server-side computational capabilities and very large scratch storage space, and further extends their functions to a range of other scientific disciplines.Although big datasets like SDSS have revolutionized astronomy research, for further analysis, users are still restricted to downloading the selected data sets locally - but increasing data sizes make this local approach impractical. Instead, researchers need online tools that are co-located with data in a virtual research environment, enabling them to bring their analysis to the data.SciServer supports this using the popular Jupyter notebooks, which allow users to write their own Python and R scripts and execute them on the server with the data (extensions to Matlab and other languages are planned). We have written special-purpose libraries that enable querying the databases and other persistent datasets. Intermediate results can be stored in large scratch space (hundreds of TBs) and analyzed directly from within Python or R with state-of-the-art visualization and machine learning libraries. Users can store science-ready results in their permanent allocation on SciDrive, a Dropbox-like system for sharing and publishing files. Communication between the various components of the SciServer system is managed through SciServer‘s new Single Sign-on Portal.We have created a number of demos to illustrate the capabilities of SciServer Compute, including Python and R scripts

Solution for an Improved WEB Server

Directory of Open Access Journals (Sweden)

George PECHERLE

2009-12-01

Full Text Available We want to present a solution with maximum performance from a web server,in terms of services that the server provides. We do not always know what tools to useor how to configure what we have in order to get what we need. Keeping the Internetrelatedservices you provide in working condition can sometimes be a real challenge.And with the increasing demand in Internet services, we need to come up with solutionsto problems that occur every day.

On the single-server retrial queue

Directory of Open Access Journals (Sweden)

Djellab Natalia V.

2006-01-01

Full Text Available In this work, we review the stochastic decomposition for the number of customers in M/G/1 retrial queues with reliable server and server subjected to breakdowns which has been the subject of investigation in the literature. Using the decomposition property of M/G/1 retrial queues with breakdowns that holds under exponential assumption for retrial times as an approximation in the non-exponential case, we consider an approximate solution for the steady-state queue size distribution.

75 FR 32190 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs...

Science.gov (United States)

2010-06-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Examining the Impact of... Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC) announces the...

Server Interface Descriptions for Automated Testing of JavaScript Web Applications

DEFF Research Database (Denmark)

Jensen, Casper Svenning; Møller, Anders; Su, Zhendong

2013-01-01

Automated testing of JavaScript web applications is complicated by the communication with servers. Specifically, it is difficult to test the JavaScript code in isolation from the server code and database contents. We present a practical solution to this problem. First, we demonstrate that formal...... server interface descriptions are useful in automated testing of JavaScript web applications for separating the concerns of the client and the server. Second, to support the construction of server interface descriptions for existing applications, we introduce an effective inference technique that learns...... communication patterns from sample data. By incorporating interface descriptions into the testing tool Artemis, our experimental results show that we increase the level of automation for high-coverage testing on a collection of JavaScript web applications that exchange JSON data between the clients and servers...

TRAP: A Three-Way Handshake Server for TCP Connection Establishment

Directory of Open Access Journals (Sweden)

Fu-Hau Hsu

2016-11-01

Full Text Available Distributed denial of service attacks have become more and more frequent nowadays. In 2013, a massive distributed denial of service (DDoS attack was launched against Spamhaus causing the service to shut down. In this paper, we present a three-way handshaking server for Transmission Control Protocol (TCP connection redirection utilizing TCP header options. When a legitimate client attempted to connect to a server undergoing an SYN-flood DDoS attack, it will try to initiate a three-way handshake. After it has successfully established a connection, the server will reply with a reset (RST packet, in which a new server address and a secret is embedded. The client can, thus, connect to the new server that only accepts SYN packets with the corrected secret using the supplied secret.

Development of intelligent instruments with embedded HTTP servers for control and data acquisition in a cryogenic setup—The hardware, firmware, and software implementation

Science.gov (United States)

Antony, Joby; Mathuria, D. S.; Datta, T. S.; Maity, Tanmoy

2015-12-01

The power of Ethernet for control and automation technology is being largely understood by the automation industry in recent times. Ethernet with HTTP (Hypertext Transfer Protocol) is one of the most widely accepted communication standards today. Ethernet is best known for being able to control through internet from anywhere in the globe. The Ethernet interface with built-in on-chip embedded servers ensures global connections for crate-less model of control and data acquisition systems which have several advantages over traditional crate-based control architectures for slow applications. This architecture will completely eliminate the use of any extra PLC (Programmable Logic Controller) or similar control hardware in any automation network as the control functions are firmware coded inside intelligent meters itself. Here, we describe the indigenously built project of a cryogenic control system built for linear accelerator at Inter University Accelerator Centre, known as "CADS," which stands for "Complete Automation of Distribution System." CADS deals with complete hardware, firmware, and software implementation of the automated linac cryogenic distribution system using many Ethernet based embedded cryogenic instruments developed in-house. Each instrument works as an intelligent meter called device-server which has the control functions and control loops built inside the firmware itself. Dedicated meters with built-in servers were designed out of ARM (Acorn RISC (Reduced Instruction Set Computer) Machine) and ATMEL processors and COTS (Commercially Off-the-Shelf) SMD (Surface Mount Devices) components, with analog sensor front-end and a digital back-end web server implementing remote procedure call over HTTP for digital control and readout functions. At present, 24 instruments which run 58 embedded servers inside, each specific to a particular type of sensor-actuator combination for closed loop operations, are now deployed and distributed across control LAN (Local

Development of intelligent instruments with embedded HTTP servers for control and data acquisition in a cryogenic setup--The hardware, firmware, and software implementation.

Science.gov (United States)

Antony, Joby; Mathuria, D S; Datta, T S; Maity, Tanmoy

2015-12-01

The power of Ethernet for control and automation technology is being largely understood by the automation industry in recent times. Ethernet with HTTP (Hypertext Transfer Protocol) is one of the most widely accepted communication standards today. Ethernet is best known for being able to control through internet from anywhere in the globe. The Ethernet interface with built-in on-chip embedded servers ensures global connections for crate-less model of control and data acquisition systems which have several advantages over traditional crate-based control architectures for slow applications. This architecture will completely eliminate the use of any extra PLC (Programmable Logic Controller) or similar control hardware in any automation network as the control functions are firmware coded inside intelligent meters itself. Here, we describe the indigenously built project of a cryogenic control system built for linear accelerator at Inter University Accelerator Centre, known as "CADS," which stands for "Complete Automation of Distribution System." CADS deals with complete hardware, firmware, and software implementation of the automated linac cryogenic distribution system using many Ethernet based embedded cryogenic instruments developed in-house. Each instrument works as an intelligent meter called device-server which has the control functions and control loops built inside the firmware itself. Dedicated meters with built-in servers were designed out of ARM (Acorn RISC (Reduced Instruction Set Computer) Machine) and ATMEL processors and COTS (Commercially Off-the-Shelf) SMD (Surface Mount Devices) components, with analog sensor front-end and a digital back-end web server implementing remote procedure call over HTTP for digital control and readout functions. At present, 24 instruments which run 58 embedded servers inside, each specific to a particular type of sensor-actuator combination for closed loop operations, are now deployed and distributed across control LAN (Local

Expert T-SQL window functions in SQL Server

CERN Document Server

Kellenberger, Kathi

2015-01-01

Expert T-SQL Window Functions in SQL Server takes you from any level of knowledge of windowing functions and turns you into an expert who can use these powerful functions to solve many T-SQL queries. Replace slow cursors and self-joins with queries that are easy to write and fantastically better performing, all through the magic of window functions. First introduced in SQL Server 2005, window functions came into full blossom with SQL Server 2012. They truly are one of the most notable developments in SQL in a decade, and every developer and DBA can benefit from their expressive power in sol

A Fuzzy Control Course on the TED Server

DEFF Research Database (Denmark)

Dotoli, Mariagrazia; Jantzen, Jan

1999-01-01

, an educational server that serves as a learning central for students and professionals working with fuzzy logic. Through the server, TED offers an online course on fuzzy control. The course concerns automatic control of an inverted pendulum, with a focus on rule based control by means of fuzzy logic. A ball......The Training and Education Committee (TED) is a committee under ERUDIT, a Network of Excellence for fuzzy technology and uncertainty in Europe. The main objective of TED is to improve the training and educational possibilities for the nodes of ERUDIT. Since early 1999, TED has set up the TED server...

Aplikasi Billing Client/Server Dengan Mengunakan Microsoft Visual Basic 6.0

OpenAIRE

Sinukaban, Eva Solida

2010-01-01

Kajian ini bertujuan untuk membangun Billing Server yang gratis dalam jaringan Local dengan media transmisi berupa kabel UTP atau Wifi, Jaringan LAN yang dibangun ini merupakan jaringan client server yang memiliki server dengan sistem operasi yang dipakai adalah windows XP Service Pack 2. Tujuan pembuatan Aplikasi Billing Server ini adalah untuk dapat melakukan sharing data dan komunikasi antar komputer sehingga komputer-komputer tersebut dapat dimanfaatkan seoptimal mungkin baik dari sisi Se...

Análisis de ciclo de vida simplificado aplicado a viviendas de paneles SIP (structural insulated panels

Directory of Open Access Journals (Sweden)

Juan Pablo Cárdenas

2015-04-01

Full Text Available A medida que los asuntos ambientales se vuelven más importantes, las construcciones se han enfocado en su eficiencia energética y la energía necesaria para construir y producir los materiales. Esta investigación muestra un estudio de Análisis de Ciclo de Vida simplificado de energía operacional y energía contenida de cuatro viviendas nuevas ubicadas en Temuco, Chile, estructuradas con paneles SIP (Structural insulated panel para cuantificar la energía en cada etapa de este sistema de construcción. Para obtener la energía contenida, fueron utilizadas dos bases de datos internacionales para cuantificar la energía de cada material y se determinó la energía contenida en el proceso relacionado a la estructura de paneles SIP a través de mediciones en una compañía especializada en construcción de paneles SIP. Para la energía operacional, se llevaron a cabo modelos computacionales con el software Design Builder y se proyectó esta energía con una vida útil de 50 años. El análisis de la información obtenida muestra que la energía contenida por procesos de construcción representa cerca del 1.7% de la energía contenida y mientras que el total de energía contenida representa el 11% de la energía del ciclo de vida total de las viviendas, el remanente 89% representa la energía de operación. Por otro lado, observamos que las viviendas con paneles SIP generan cifras cercanas al 60% en ahorro en demanda energética, comparadas a las viviendas de mampostería estructural normalmente construidas en esta ciudad.

Improvements to the National Transport Code Collaboration Data Server

Science.gov (United States)

Alexander, David A.

2001-10-01

The data server of the National Transport Code Colaboration Project provides a universal network interface to interpolated or raw transport data accessible by a universal set of names. Data can be acquired from a local copy of the Iternational Multi-Tokamak (ITER) profile database as well as from TRANSP trees of MDS Plus data systems on the net. Data is provided to the user's network client via a CORBA interface, thus providing stateful data server instances, which have the advantage of remembering the desired interpolation, data set, etc. This paper will review the status and discuss the recent improvements made to the data server, such as the modularization of the data server and the addition of hdf5 and MDS Plus data file writing capability.

Openlobby: an open game server for lobby and matchmaking

Science.gov (United States)

Zamzami, E. M.; Tarigan, J. T.; Jaya, I.; Hardi, S. M.

2018-03-01

Online Multiplayer is one of the most essential feature in modern games. However, while developing a multiplayer feature can be done with a simple computer networking programming, creating a balanced multiplayer session requires more player management components such as game lobby and matchmaking system. Our objective is to develop OpenLobby, a server that available to be used by other developers to support their multiplayer application. The proposed system acts as a lobby and matchmaker where queueing players will be matched to other player according to a certain criteria defined by developer. The solution provides an application programing interface that can be used by developer to interact with the server. For testing purpose, we developed a game that uses the server as their multiplayer server.

Using Pattern Recognition Techniques for Server Overload Detection

NARCIS (Netherlands)

Bezemer, C.P.; Cheplygina, V.; Zaidman, A.

2011-01-01

One of the key factors in customer satisfaction is application performance. To be able to guarantee good performance, it is necessary to take appropriate measures before a server overload occurs. While in small systems it is usually possible to predict server overload using a subjective human

Server virtualization management of corporate network with hyper-v

OpenAIRE

Kovalenko, Taras

2012-01-01

On a paper main tasks and problems of server virtualization are considerate. Practical value of virtualization in a corporate network, advantages and disadvantages of application of server virtualization are also considerate.

A Distributed Public Key Infrastructure Based on Threshold Cryptography for the HiiMap Next Generation Internet Architecture

Directory of Open Access Journals (Sweden)

Oliver Hanka

2011-02-01

Full Text Available In this article, a security extension for the HiiMap Next Generation Internet Architecture is presented. We regard a public key infrastructure which is integrated into the mapping infrastructure of the locator/identifier-split addressing scheme. The security approach is based on Threshold Cryptography which enables a sharing of keys among the mapping servers. Hence, a more trustworthy and fair approach for a Next Generation Internet Architecture as compared to the state of the art approach is fostered. Additionally, we give an evaluation based on IETF AAA recommendations for security-related systems.

Empirical Analysis of Server Consolidation and Desktop Virtualization in Cloud Computing

Directory of Open Access Journals (Sweden)

Bao Rong Chang

2013-01-01

Full Text Available Physical server transited to virtual server infrastructure (VSI and desktop device to virtual desktop infrastructure (VDI have the crucial problems of server consolidation, virtualization performance, virtual machine density, total cost of ownership (TCO, and return on investments (ROI. Besides, how to appropriately choose hypervisor for the desired server/desktop virtualization is really challenging, because a trade-off between virtualization performance and cost is a hard decision to make in the cloud. This paper introduces five hypervisors to establish the virtual environment and then gives a careful assessment based on C/P ratio that is derived from composite index, consolidation ratio, virtual machine density, TCO, and ROI. As a result, even though ESX server obtains the highest ROI and lowest TCO in server virtualization and Hyper-V R2 gains the best performance of virtual machine management; both of them however cost too much. Instead the best choice is Proxmox Virtual Environment (Proxmox VE because it not only saves the initial investment a lot to own a virtual server/desktop infrastructure, but also obtains the lowest C/P ratio.

Windows Server® 2008 Inside Out

CERN Document Server

Stanek, William R

2009-01-01

Learn how to conquer Windows Server 2008-from the inside out! Designed for system administrators, this definitive resource features hundreds of timesaving solutions, expert insights, troubleshooting tips, and workarounds for administering Windows Server 2008-all in concise, fast-answer format. You will learn how to perform upgrades and migrations, automate deployments, implement security features, manage software updates and patches, administer users and accounts, manage Active Directory® directory services, and more. With INSIDE OUT, you'll discover the best and fastest ways to perform core a

Two-Cloud-Servers-Assisted Secure Outsourcing Multiparty Computation

Science.gov (United States)

Wen, Qiaoyan; Zhang, Hua; Jin, Zhengping; Li, Wenmin

2014-01-01

We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users' public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function. PMID:24982949

Improving data retrieval rates using remote data servers

International Nuclear Information System (INIS)

D'Ottavio, T.; Frak, B.; Nemesure, S.; Morris, J.

2012-01-01

The power and scope of modern Control Systems has led to an increased amount of data being collected and stored, including data collected at high (kHz) frequencies. One consequence is that users now routinely make data requests that can cause giga-bytes of data to be read and displayed. Given that a user's patience can be measured in seconds, this can be quite a technical challenge. This paper explores one possible solution to this problem - the creation of remote data servers whose performance is optimized to handle context-sensitive data requests. Methods for increasing data delivery performance include the use of high speed network connections between the stored data and the data servers, smart caching of frequently used data, and the culling of data delivered as determined by the context of the data request. This paper describes decisions made when constructing these servers and compares data retrieval performance by clients that use or do not use an intermediate data server. (authors)

Two-cloud-servers-assisted secure outsourcing multiparty computation.

Science.gov (United States)

Sun, Yi; Wen, Qiaoyan; Zhang, Yudong; Zhang, Hua; Jin, Zhengping; Li, Wenmin

2014-01-01

We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users' public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function.

KISS-Tree: Smart Latch-Free In-Memory Indexing on Modern Architectures

OpenAIRE

Kissinger, Thomas; Schlegel, Benjamin; Habich, Dirk; Lehner, Wolfgang

2012-01-01

Growing main memory capacities and an increasing number of hardware threads in modern server systems led to fundamental changes in database architectures. Most importantly, query processing is nowadays performed on data that is often completely stored in main memory. Despite of a high main memory scan performance, index structures are still important components, but they have to be designed from scratch to cope with the specific characteristics of main memory and to exploit the high degree of...

Getting started with Oracle WebLogic Server 12c developer's guide

CERN Document Server

Nunes, Fabio Mazanatti

2013-01-01

Getting Started with Oracle WebLogic Server 12c is a fast-paced and feature-packed book, designed to get you working with Java EE 6, JDK 7 and Oracle WebLogic Server 12c straight away, so start developing your own applications.Getting Started with Oracle WebLogic Server 12c: Developer's Guide is written for developers who are just getting started, or who have some experience, with Java EE who want to learn how to develop for and use Oracle WebLogic Server. Getting Started with Oracle WebLogic Server 12c: Developer's Guide also provides a great overview of the updated features of the 12c releas

Instant Microsoft SQL Server Analysis Services 2012 dimensions and cube

CERN Document Server

Acharya, Anurag

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. Written in a practical, friendly manner this book will take you through the journey from installing SQL Server to developing your first cubes.""Microsoft SQL Server Analysis Service 2012 Dimensions"" and Cube Starter is targeted at anyone who wants to get started with cube development in Microsoft SQL Server Analysis Services. Regardless of whether you are a SQL Server developer who knows nothing about cube development or SSAS or even OLAP, you

Dynamic Web Pages: Performance Impact on Web Servers.

Science.gov (United States)

Kothari, Bhupesh; Claypool, Mark

2001-01-01

Discussion of Web servers and requests for dynamic pages focuses on experimentally measuring and analyzing the performance of the three dynamic Web page generation technologies: CGI, FastCGI, and Servlets. Develops a multivariate linear regression model and predicts Web server performance under some typical dynamic requests. (Author/LRW)

Comparing Server Energy Use and Efficiency Using Small Sample Sizes

Energy Technology Data Exchange (ETDEWEB)

Coles, Henry C.; Qin, Yong; Price, Phillip N.

2014-11-01

This report documents a demonstration that compared the energy consumption and efficiency of a limited sample size of server-type IT equipment from different manufacturers by measuring power at the server power supply power cords. The results are specific to the equipment and methods used. However, it is hoped that those responsible for IT equipment selection can used the methods described to choose models that optimize energy use efficiency. The demonstration was conducted in a data center at Lawrence Berkeley National Laboratory in Berkeley, California. It was performed with five servers of similar mechanical and electronic specifications; three from Intel and one each from Dell and Supermicro. Server IT equipment is constructed using commodity components, server manufacturer-designed assemblies, and control systems. Server compute efficiency is constrained by the commodity component specifications and integration requirements. The design freedom, outside of the commodity component constraints, provides room for the manufacturer to offer a product with competitive efficiency that meets market needs at a compelling price. A goal of the demonstration was to compare and quantify the server efficiency for three different brands. The efficiency is defined as the average compute rate (computations per unit of time) divided by the average energy consumption rate. The research team used an industry standard benchmark software package to provide a repeatable software load to obtain the compute rate and provide a variety of power consumption levels. Energy use when the servers were in an idle state (not providing computing work) were also measured. At high server compute loads, all brands, using the same key components (processors and memory), had similar results; therefore, from these results, it could not be concluded that one brand is more efficient than the other brands. The test results show that the power consumption variability caused by the key components as a

77 FR 29351 - Disease, Disability, and Injury Prevention and Control; Special Interest Projects (SIPs): Initial...

Science.gov (United States)

2012-05-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control; Special Interest Projects (SIPs): Initial Review The meeting.... L. 92-463), the Centers for Disease Control and Prevention (CDC) announces the aforementioned...

Acceleration of Blender Cycles Path-Tracing Engine Using Intel Many Integrated Core Architecture

OpenAIRE

Jaroš , Milan; Říha , Lubomír; Strakoš , Petr; Karásek , Tomáš; Vašatová , Alena; Jarošová , Marta; Kozubek , Tomáš

2015-01-01

Part 2: Algorithms; International audience; This paper describes the acceleration of the most computationally intensive kernels of the Blender rendering engine, Blender Cycles, using Intel Many Integrated Core architecture (MIC). The proposed parallelization, which uses OpenMP technology, also improves the performance of the rendering engine when running on multi-core CPUs and multi-socket servers. Although the GPU acceleration is already implemented in Cycles, its functionality is limited. O...

Spectral Induced Polarization (SIP) monitoring during Microbial Enhanced Oil Recovery (MEOR)

Science.gov (United States)

Heenan, J. W.; Ntarlagiannis, D.; Slater, L. D.

2010-12-01

Jeffrey Heenan, Dimitrios Ntarlagiannis, Lee Slater Department of Earth and Environmental Sciences, Rutgers University, Newark NJ Microbial Enhanced Oil Recovery (MEOR) is an established, cost effective, method for enhancing tertiary oil recovery. Although not commonly used for shallow heavy oils, it could be a viable alternative since it can offer sustainable economic recovery and minimal environmental impact. A critical component of successful MEOR treatments is accurate, real time monitoring of the biodegradation processes resulting from the injection of microbial communities into the formation; results of recent biogeophysical research suggest that minimally-invasive geophysical methods could significantly contribute to such monitoring efforts. Here we present results of laboratory experiments, to assess the sensitivity of the spectral induced polarization method (SIP) to MEOR treatments. We used heavy oil, obtained from a shallow oilfield in SW Missouri, to saturate three sand columns. We then followed common industry procedures,and used a commercially available microbial consortia, to treat the oil columns. The active MEOR experiments were performed in duplicate while a control column maintained similar conditions, without promoting microbial activity and oil degradation. We monitored the SIP signatures, between 0.001 Hz and 1000 Hz, for a period of six months. To support the geophysical measurements we also monitored common geochemical parameters, including pH, Eh and fluid conductivity, and collected weekly fluid samples from the outflow and inflow for further analysis; fluid samples were analyzed to confirm that microbes actively degraded the heavy oils in the column while destructive analysis of the solid materials was performed upon termination of the experiment. Preliminary analysis of the results suggests that SIP is sensitive to MEOR processes. In both inoculated columns we recorded an increase in the low frequency polarization with time; measureable

Mac OS X Snow Leopard Server For Dummies

CERN Document Server

Rizzo, John

2009-01-01

Making Everything Easier!. Mac OS® X Snow Leopard Server for Dummies. Learn to::;. Set up and configure a Mac network with Snow Leopard Server;. Administer, secure, and troubleshoot the network;. Incorporate a Mac subnet into a Windows Active Directory® domain;. Take advantage of Unix® power and security. John Rizzo. Want to set up and administer a network even if you don't have an IT department? Read on!. Like everything Mac, Snow Leopard Server was designed to be easy to set up and use. Still, there are so many options and features that this book will save you heaps of time and effort. It wa

Relevance of phosphorus incorporation and hydrogen removal for Si:P {delta}-doped layers fabricated using phosphine

Energy Technology Data Exchange (ETDEWEB)

Goh, K.E.J.; Oberbeck, L.; Simmons, M.Y. [Centre for Quantum Computer Technology, School of Physics, The University of New South Wales, Sydney, New South Wales 2052 (Australia)

2005-05-01

We present a study to determine the importance of phosphorus incorporation and hydrogen removal for the electrical activation of phosphorus dopants in Si:P {delta}-doped samples fabricated using phosphine dosing and molecular beam epitaxy (MBE). The carrier densities in these samples were determined from Hall effect measurements at 4 K sample temperature. An anneal to incorporate phosphorus atoms into substitutional lattice sites is critical to achieving full dopant activation after Si encapsulation by MBE. Whilst the presence of hydrogen can degrade the quality of the Si encapsulation layer, we show that it does not adversely impact the electrical activation of the phosphorus dopants. We discuss the relevance of our results to the fabrication of nano-scale Si:P devices. (copyright 2005 WILEY-VCH Verlag GmbH and C o. KGaA, Weinheim) (orig.)

An energy-efficient architecture for internet of things systems

Science.gov (United States)

De Rango, Floriano; Barletta, Domenico; Imbrogno, Alessandro

2016-05-01

In this paper some of the motivations for energy-efficient communications in wireless systems are described by highlighting emerging trends and identifying some challenges that need to be addressed to enable novel, scalable and energy-efficient communications. So an architecture for Internet of Things systems is presented, the purpose of which is to minimize energy consumption by communication devices, protocols, networks, end-user systems and data centers. Some electrical devices have been designed with multiple communication interfaces, such as RF or WiFi, using open source technology; they have been analyzed under different working conditions. Some devices are programmed to communicate directly with a web server, others to communicate only with a special device that acts as a bridge between some devices and the web server. Communication parameters and device status have been changed dynamically according to different scenarios in order to have the most benefits in terms of energy cost and battery lifetime. So the way devices communicate with the web server or between each other and the way they try to obtain the information they need to be always up to date change dynamically in order to guarantee always the lowest energy consumption, a long lasting battery lifetime, the fastest responses and feedbacks and the best quality of service and communication for end users and inner devices of the system.

Utilizing cloud storage architecture for long-pulse fusion experiment data storage

Energy Technology Data Exchange (ETDEWEB)

Zhang, Ming; Liu, Qiang [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan, Hubei (China); School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, Hubei (China); Zheng, Wei, E-mail: zhenghaku@gmail.com [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan, Hubei (China); School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, Hubei (China); Wan, Kuanhong; Hu, Feiran; Yu, Kexun [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan, Hubei (China); School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, Hubei (China)

2016-11-15

Scientific data storage plays a significant role in research facility. The explosion of data in recent years was always going to make data access, acquiring and management more difficult especially in fusion research field. For future long-pulse experiment like ITER, the extremely large data will be generated continuously for a long time, putting much pressure on both the write performance and the scalability. And traditional database has some defects such as inconvenience of management, hard to scale architecture. Hence a new data storage system is very essential. J-TEXTDB is a data storage and management system based on an application cluster and a storage cluster. J-TEXTDB is designed for big data storage and access, aiming at improving read–write speed, optimizing data system structure. The application cluster of J-TEXTDB is used to provide data manage functions and handles data read and write operations from the users. The storage cluster is used to provide the storage services. Both clusters are composed with general servers. By simply adding server to the cluster can improve the read–write performance, the storage space and redundancy, making whole data system highly scalable and available. In this paper, we propose a data system architecture and data model to manage data more efficient. Benchmarks of J-TEXTDB performance including read and write operations are given.

Utilizing cloud storage architecture for long-pulse fusion experiment data storage

International Nuclear Information System (INIS)

Zhang, Ming; Liu, Qiang; Zheng, Wei; Wan, Kuanhong; Hu, Feiran; Yu, Kexun

2016-01-01

Scientific data storage plays a significant role in research facility. The explosion of data in recent years was always going to make data access, acquiring and management more difficult especially in fusion research field. For future long-pulse experiment like ITER, the extremely large data will be generated continuously for a long time, putting much pressure on both the write performance and the scalability. And traditional database has some defects such as inconvenience of management, hard to scale architecture. Hence a new data storage system is very essential. J-TEXTDB is a data storage and management system based on an application cluster and a storage cluster. J-TEXTDB is designed for big data storage and access, aiming at improving read–write speed, optimizing data system structure. The application cluster of J-TEXTDB is used to provide data manage functions and handles data read and write operations from the users. The storage cluster is used to provide the storage services. Both clusters are composed with general servers. By simply adding server to the cluster can improve the read–write performance, the storage space and redundancy, making whole data system highly scalable and available. In this paper, we propose a data system architecture and data model to manage data more efficient. Benchmarks of J-TEXTDB performance including read and write operations are given.

From Server to Desktop: Capital and Institutional Planning for Client/Server Technology.

Science.gov (United States)

Mullig, Richard M.; Frey, Keith W.

1994-01-01

Beginning with a request for an enhanced system for decision/strategic planning support, the University of Chicago's biological sciences division has developed a range of administrative client/server tools, instituted a capital replacement plan for desktop technology, and created a planning and staffing approach enabling rapid introduction of new…

iPhone with Microsoft Exchange Server 2010 Business Integration and Deployment

CERN Document Server

Goodman, Steve

2012-01-01

iPhone with Microsoft Exchange Server 2010 - Business Integration and Deployment is a practical, step-by-step tutorial on planning, installing and configuring Exchange Server to deploy iPhones into your business. This book is aimed at system administrators who don't necessarily know about Exchange Server 2010 or ActiveSync-based mobile devices. A basic level of knowledge around Windows Servers is expected, and knowledge of smartphones and email systems in general will make some topics a little easier.

76 FR 27649 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Initial...

Science.gov (United States)

2011-05-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Initial Review The meeting... Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC) announces the...

75 FR 30410 - Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Provider...

Science.gov (United States)

2010-06-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Provider and Public Health... Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

Improved materials management through client/server computing

International Nuclear Information System (INIS)

Brooks, D.; Neilsen, E.; Reagan, R.; Simmons, D.

1992-01-01

This paper reports that materials management and procurement impacts every organization within an electric utility from power generation to customer service. An efficient material management and procurement system can help improve productivity and minimize operating costs. It is no longer sufficient to simply automate materials management using inventory control systems. Smart companies are building centralized data warehouses and use the client/server style of computing to provide real time data access. This paper describes how Alabama Power Company, Southern Company Services and Digital Equipment Corporation transformed two existing applications, a purchase order application within DEC's ALL-IN-1 environment and a materials management application within an IBM CICS environment, into a data warehouse - client/server application. An application server is used to overcome incompatibilities between computing environments and provide easy, real-time access to information residing in multi-vendor environments

78 FR 50360 - Approval and Promulgation of Air Quality Implementation Plans; Indiana; Infrastructure SIP...

Science.gov (United States)

2013-08-19

... ensure that the structural components of each state's air quality management program are adequate to meet... SIP. The Indiana Department of Environmental Management (IDEM) has requested that EPA approve these... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R05-OAR-2011-0888; EPA-R05-OAR-2011-0969; EPA...

The strategy of the shelter implementation plan (SIP) performance

International Nuclear Information System (INIS)

Geras'ko, V.N.; Nosovskij, A.V.

1999-01-01

In 1997 the 'Shelter Implementation Plan' (SIP) was developed it's purpose was to transform Unit 4 of the Chernobyl NPP into the ecologically safe system. The Plan was developed by common efforts of the Ukrainian scientists, CES representatives and experts from the United States of America. The fact that there are no nuclear and radiation safety criteria for the projects will result into the situation when different designers might use within the various project tasks various design criteria. Till now o exact date for the constructions stabilization activities has been defined, and it creates a kind of on definiteness while developing the Radioactive Waste Management strategy and Safe Confinement

Data Architecture for Sensor Network

Directory of Open Access Journals (Sweden)

Jan Ježek

2012-03-01

Full Text Available Fast development of hardware in recent years leads to the high availability of simple sensing devices at minimal cost. As a consequence, there is many of sensor networks nowadays. These networks can continuously produce a large amount of observed data including the location of measurement. Optimal data architecture for such propose is a challenging issue due to its large scale and spatio-temporal nature.  The aim of this paper is to describe data architecture that was used in a particular solution for storage of sensor data. This solution is based on relation data model – concretely PostgreSQL and PostGIS. We will mention out experience from real world projects focused on car monitoring and project targeted on agriculture sensor networks. We will also shortly demonstrate the possibilities of client side API and the potential of other open source libraries that can be used for cartographic visualization (e.g. GeoServer. The main objective is to describe the strength and weakness of usage of relation database system for such propose and to introduce also alternative approaches based on NoSQL concept.

Two-Cloud-Servers-Assisted Secure Outsourcing Multiparty Computation

Directory of Open Access Journals (Sweden)

Yi Sun

2014-01-01

Full Text Available We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users’ public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function.

SiP monolayers: New 2D structures of group IV-V compounds for visible-light photohydrolytic catalysts

Science.gov (United States)

Ma, Zhinan; Zhuang, Jibin; Zhang, Xu; Zhou, Zhen

2018-06-01

Because of graphene and phosphorene, two-dimensional (2D) layered materials of group IV and group V elements arouse great interest. However, group IV-V monolayers have not received due attention. In this work, three types of SiP monolayers were computationally designed to explore their electronic structure and optical properties. Computations confirm the stability of these monolayers, which are all indirect-bandgap semiconductors with bandgaps in the range 1.38-2.21 eV. The bandgaps straddle the redox potentials of water at pH = 0, indicating the potential of the monolayers for use as watersplitting photocatalysts. The computed optical properties demonstrate that certain monolayers of SiP 2D materials are absorbers of visible light and would serve as good candidates for optoelectronic devices.

Mfold web server for nucleic acid folding and hybridization prediction.

Science.gov (United States)

Zuker, Michael

2003-07-01

The abbreviated name, 'mfold web server', describes a number of closely related software applications available on the World Wide Web (WWW) for the prediction of the secondary structure of single stranded nucleic acids. The objective of this web server is to provide easy access to RNA and DNA folding and hybridization software to the scientific community at large. By making use of universally available web GUIs (Graphical User Interfaces), the server circumvents the problem of portability of this software. Detailed output, in the form of structure plots with or without reliability information, single strand frequency plots and 'energy dot plots', are available for the folding of single sequences. A variety of 'bulk' servers give less information, but in a shorter time and for up to hundreds of sequences at once. The portal for the mfold web server is http://www.bioinfo.rpi.edu/applications/mfold. This URL will be referred to as 'MFOLDROOT'.

Implementation of time synchronized cryogenics control system network architecture for SST-1

Energy Technology Data Exchange (ETDEWEB)

Patel, Rakesh J., E-mail: rpatel@ipr.res.in; Mahesuria, Gaurang; Panchal, Pradip; Panchal, Rohit; Sonara, Dasarath; Tanna, Vipul; Pradhan, Subrata

2016-11-15

Highlights: • SST-1 cryogenics sub-systems are 1.3 kW HRL, LN2 distribution system, current feeders system and 80 K booster system. • GUI developed in SCADA and control program developed in PLC for automation of the above sub-systems. • Implemented the cryogenics control system network to communicate all systems to InSQL server. • InSQL server configured for real time centralized process data acquisition from all connected sub-systems control nodes. • Acquired the process parameters coming from different systems at same time stamp. - Abstract: Under the SST-1 mission mandate, the several cryogenic sub-systems have been developed, upgraded and procured in prior to the SST-1 operation. New developments include 80 K Bubble type thermal shields, LN2 distribution system, LN2 booster system and current feeders system (CFS).Graphical User Interface (GUI) program developed in Wonderware SCADA and control logic program developed in Schneider make PLC for the above sub-systems. Industrial SQL server (InSQL) configured for centralized storage of real time process data coming from various control nodes of cryogenics sub-systems. The cryogenics control system network for communicating all cryogenics sub-system control nodes to InSQL server for centralized data storage and time synchronization among cryogenic sub-systems with centralized InSQL server is successfully implemented. Due to implemented time synchronization among sub-systems control nodes, it is possible to analyze the process parameters coming from different sub-systems at same time stamp. This paper describes the overview of implemented cryogenics control system network architecture for real time cryogenic process data monitor, storage and retrieval.

Implementation of time synchronized cryogenics control system network architecture for SST-1

International Nuclear Information System (INIS)

Patel, Rakesh J.; Mahesuria, Gaurang; Panchal, Pradip; Panchal, Rohit; Sonara, Dasarath; Tanna, Vipul; Pradhan, Subrata

2016-01-01

Highlights: • SST-1 cryogenics sub-systems are 1.3 kW HRL, LN2 distribution system, current feeders system and 80 K booster system. • GUI developed in SCADA and control program developed in PLC for automation of the above sub-systems. • Implemented the cryogenics control system network to communicate all systems to InSQL server. • InSQL server configured for real time centralized process data acquisition from all connected sub-systems control nodes. • Acquired the process parameters coming from different systems at same time stamp. - Abstract: Under the SST-1 mission mandate, the several cryogenic sub-systems have been developed, upgraded and procured in prior to the SST-1 operation. New developments include 80 K Bubble type thermal shields, LN2 distribution system, LN2 booster system and current feeders system (CFS).Graphical User Interface (GUI) program developed in Wonderware SCADA and control logic program developed in Schneider make PLC for the above sub-systems. Industrial SQL server (InSQL) configured for centralized storage of real time process data coming from various control nodes of cryogenics sub-systems. The cryogenics control system network for communicating all cryogenics sub-system control nodes to InSQL server for centralized data storage and time synchronization among cryogenic sub-systems with centralized InSQL server is successfully implemented. Due to implemented time synchronization among sub-systems control nodes, it is possible to analyze the process parameters coming from different sub-systems at same time stamp. This paper describes the overview of implemented cryogenics control system network architecture for real time cryogenic process data monitor, storage and retrieval.

CERN Document Server (CDS): Introduction

CERN Multimedia

CERN. Geneva; Costa, Flavio

2017-01-01

A short online tutorial introducing the CERN Document Server (CDS). Basic functionality description, the notion of Revisions and the CDS test environment. Links: CDS Production environment CDS Test environment  

Stereotactic body radiotherapy (SBRT) in recurrent or oligometastatic pancreatic cancer. A toxicity review of simultaneous integrated protection (SIP) versus conventional SBRT

Energy Technology Data Exchange (ETDEWEB)

Gkika, E.; Kirste, S.; Schimek-Jasch, T. [University Medical Center Freiburg, Department of Radiation Oncology, Freiburg im Breisgau (Germany); Adebahr, S. [University Medical Center Freiburg, Department of Radiation Oncology, Freiburg im Breisgau (Germany); German Cancer Consortium (DKTK), Heidelberg (partner site Freiburg) (Germany); Wiehle, R. [University Medical Center Freiburg, Division of Medical Physics, Department of Radiation Oncology, Freiburg (Germany); Claus, R. [University Medical Center Freiburg, Department of Hematology, Oncology and Stem-Cell Transplantation, Freiburg (Germany); Wittel, U. [University Medical Center Freiburg, Department of General and Visceral Surgery, Freiburg (Germany); Nestle, U.; Grosu, A.L.; Brunner, T.B. [University Medical Center Freiburg, Department of Radiation Oncology, Freiburg im Breisgau (Germany); German Cancer Consortium (DKTK), Heidelberg (partner site Freiburg) (Germany); University of Freiburg, Faculty of Medicine, Freiburg (Germany); Baltas, D. [University Medical Center Freiburg, Division of Medical Physics, Department of Radiation Oncology, Freiburg (Germany); German Cancer Consortium (DKTK), Heidelberg (partner site Freiburg) (Germany); University of Freiburg, Faculty of Medicine, Freiburg (Germany)

2017-06-15

Stereotactic body radiotherapy (SBRT) in pancreatic cancer can be limited by its proximity to organs at risk (OAR). In this analysis, we evaluated the toxicity and efficacy of two different treatment approaches in patients with locally recurrent or oligometastatic pancreatic cancer. According to the prescription method, patients were divided in two cohorts (C1 and C2). The planning target volume (PTV) was created through a 4 mm expansion of the internal target volume. In C2, a subvolume was additionally created, a simultaneous integrated protection (SIP), which is the overlap of the PTV with the planning risk volume of an OAR to which we prescribed a reduced dose. In all, 18 patients were treated (7 with local recurrences, 9 for oligometastases, 2 for both). Twelve of 23 lesions were treated without SIP (C1) and 11 with SIP (C2). The median follow-up was 12.8 months. Median overall survival (OS) was 13.2 (95% confidence interval [CI] 9.8-14.6) months. The OS rates at 6 and 12 months were 87 and 58%, respectively. Freedom from local progression for combined cohorts at 6 and 12 months was 93 and 67% (95% CI 15-36), respectively. Local control was not statistically different between the two groups. One patient in C2 experienced grade ≥3 acute toxicities and 1 patient in C1 experienced a grade ≥3 late toxicity. The SIP approach is a useful prescription method for abdominal SBRT with a favorable toxicity profile which does not compromise local control and overall survival despite dose sacrifices in small subvolumes. (orig.) [German] Die stereotaktische Strahlentherapie (SBRT) ist bei Pankreaskarzinomen durch die enge Lagebeziehung der Risikoorgane (OAR) zum Zielvolumen erschwert. In dieser Analyse evaluierten wir die Toxizitaet und die Lokalkontrolle von zwei unterschiedlichen Therapiestrategien bei Patienten mit rezidivierendem oder oligometastatischem Pankreaskarzinom. Die Patienten wurden anhand der Verschreibungsmethode in zwei Kohorten geteilt (C1 und C2). Das

Security solution against denial of service attacks in BESIP system

Science.gov (United States)

Rezac, Filip; Voznak, Miroslav; Safarik, Jakub; Partila, Pavol; Tomala, Karel

2013-05-01

This article deals about embedded SIP communication server with an easy integration into the computer network based on open source solutions and its effective defense against the most frequent attack in the present - Denial of Service. The article contains brief introduction into the Bright Embedded Solution for IP Telephony - BESIP and describes the most common types of DoS attacks, which are applied on SIP elements of the VoIP infrastructure including the results of defensive mechanism that has been designed.

Web-based IP telephony penetration system evaluating level of protection from attacks and threats

OpenAIRE

Vozňák, Miroslav; Řezáč, Filip

2011-01-01

This article deals with detection of threats in IP telephony, the authors developed a penetration testing system that is able to check up the level of protection from security threats in IP telephony. SIP is being widely used in building VoIP networks. Unlike the traditional telephone networks VoIP networks does not have a closed communication which makes communication medium vulnerable to all kinds of attacks from the in truders. The SIP server is a key component of VoIP infrastr...

77 FR 30292 - Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Initial...

Science.gov (United States)

2012-05-22

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Initial Review The meeting...)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and...

75 FR 30410 - Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Outcomes...

Science.gov (United States)

2010-06-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Outcomes of Screening... 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92- 463), the Centers for Disease Control and...

An Application-Driven Modular IoT Architecture

Directory of Open Access Journals (Sweden)

Kumar Yelamarthi

2017-01-01

Full Text Available Building upon the advancements in the recent years, a new paradigm in technology has emerged in Internet of Things (IoT. IoT has allowed for communication with the surrounding environment through a multitude of sensors and actuators, yet operating on limited energy. Several researchers have presented IoT architectures for respective applications, often challenged by requiring major updates for adoption to a different application. Further, this comes with several uncertainties such as type of computational device required at the edge, mode of wireless connectivity required, methods to obtain power efficiency, and not ensuring rapid deployment. This paper starts with providing a horizontal overview of each layer in IoT architecture and options for different applications. Then it presents a broad application-driven modular architecture, which can be easily customized for rapid deployment. This paper presents the diverse hardware used in several IoT layers such as sensors, embedded processors, wireless transceivers, internet gateway, and application management cloud server. Later, this paper presents implementation results for diverse applications including healthcare, structural health monitoring, agriculture, and indoor tour guide systems. It is hoped that this research will assist the potential user to easily choose IoT hardware and software as it pertains to their respective needs.

Instant Hyper-v Server Virtualization starter

CERN Document Server

Eguibar, Vicente Rodriguez

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.The approach would be in a tutorial manner that will guide the users in an orderly manner toward virtualization.This book is conceived for system administrator and advanced PC enthusiasts who want to venture into the virtualization world. Although this book goes from scratch up, knowledge on server Operative Systems, LAN and networking has to be in place. Having a good background on server administration is desirable, including networking service

Designing a scalable video-on-demand server with data sharing

Science.gov (United States)

Lim, Hyeran; Du, David H. C.

2001-01-01

As current disk space and transfer speed increase, the bandwidth between a server and its disks has become critical for video-on-demand (VOD) services. Our VOD server consists of several hosts sharing data on disks through a ring-based network. Data sharing provided by the spatial-reuse ring network between servers and disks not only increases the utilization towards full bandwidth but also improves the availability of videos. Striping and replication methods are introduced in order to improve the efficiency of our VOD server system as well as the availability of videos. We consider tow kinds of resources of a VOD server system. Given a representative access profile, our intention is to propose an algorithm to find an initial condition, place videos on disks in the system successfully. If any copy of a video cannot be placed due to lack of resources, more servers/disks are added. When all videos are place on the disks by our algorithm, the final configuration is determined with indicator of how tolerable it is against the fluctuation in demand of videos. Considering it is a NP-hard problem, our algorithm generates the final configuration with O(M log M) at best, where M is the number of movies.

Look-ahead policies for admission to a single server loss system

NARCIS (Netherlands)

Nawijn, W.M.

1990-01-01

Consider a single server loss system in which the server, being idle, may reject or accept an arriving customer for service depending on the state at the arrival epoch. It is assumed that at every arrival epoch the server knows the service time of the arriving customer, the arrival time of the next

Research Article Special Issue

African Journals Online (AJOL)

2017-09-10

Sep 10, 2017 ... IP USING SIP SERVER: WIDE AREA NETWORK PERFORMA. ANALYSIS ... by using network performance monitoring tool available thes ... for VoIP traffic is far less than its maximal 11Mbps data rate it currently supports [4].

HDF-EOS Web Server

Science.gov (United States)

Ullman, Richard; Bane, Bob; Yang, Jingli

2008-01-01

A shell script has been written as a means of automatically making HDF-EOS-formatted data sets available via the World Wide Web. ("HDF-EOS" and variants thereof are defined in the first of the two immediately preceding articles.) The shell script chains together some software tools developed by the Data Usability Group at Goddard Space Flight Center to perform the following actions: Extract metadata in Object Definition Language (ODL) from an HDF-EOS file, Convert the metadata from ODL to Extensible Markup Language (XML), Reformat the XML metadata into human-readable Hypertext Markup Language (HTML), Publish the HTML metadata and the original HDF-EOS file to a Web server and an Open-source Project for a Network Data Access Protocol (OPeN-DAP) server computer, and Reformat the XML metadata and submit the resulting file to the EOS Clearinghouse, which is a Web-based metadata clearinghouse that facilitates searching for, and exchange of, Earth-Science data.

Sending servers to Morocco

CERN Multimedia

Joannah Caborn Wengler

2012-01-01

Did you know that computer centres are like people? They breathe air in and out like a person, they have to be kept at the right temperature, and they can even be organ donors. As part of a regular cycle of equipment renewal, the CERN Computer Centre has just donated 161 retired servers to universities in Morocco.   Prof. Abdeslam Hoummada and CERN DG Rolf Heuer seeing off the servers on the beginning of their journey to Morocco. “Many people don’t realise, but the Computer Centre is like a living thing. You don’t just install equipment and it runs forever. We’re continually replacing machines, broken parts and improving things like the cooling.” Wayne Salter, Leader of the IT Computing Facilities Group, watches over the Computer Centre a bit like a nurse monitoring a patient’s temperature, especially since new international recommendations for computer centre environmental conditions were released. “A new international s...

Supervisory control system implemented in programmable logical controller web server

OpenAIRE

Milavec, Simon

2012-01-01

In this thesis, we study the feasibility of supervisory control and data acquisition (SCADA) system realisation in a web server of a programmable logic controller. With the introduction of Ethernet protocol to the area of process control, the more powerful programmable logic controllers obtained integrated web servers. The web server of a programmable logic controller, produced by Siemens, will also be described in this thesis. Firstly, the software and the hardware equipment used for real...

KFC Server: interactive forecasting of protein interaction hot spots.

Science.gov (United States)

Darnell, Steven J; LeGault, Laura; Mitchell, Julie C

2008-07-01

The KFC Server is a web-based implementation of the KFC (Knowledge-based FADE and Contacts) model-a machine learning approach for the prediction of binding hot spots, or the subset of residues that account for most of a protein interface's; binding free energy. The server facilitates the automated analysis of a user submitted protein-protein or protein-DNA interface and the visualization of its hot spot predictions. For each residue in the interface, the KFC Server characterizes its local structural environment, compares that environment to the environments of experimentally determined hot spots and predicts if the interface residue is a hot spot. After the computational analysis, the user can visualize the results using an interactive job viewer able to quickly highlight predicted hot spots and surrounding structural features within the protein structure. The KFC Server is accessible at http://kfc.mitchell-lab.org.

Analysis of Web Server Log Files: Website of Information Management Department of Hacettepe University

Directory of Open Access Journals (Sweden)

Mandana Mir Moftakhari

2015-09-01

Full Text Available Over the last decade, the importance of analysing information management systems logs has grown, because it has proved that results of the analysing log data can help developing in information system design, interface and architecture of websites. Log file analysis is one of the best ways in order to understand information-searching process of online searchers, users’ needs, interests, knowledge, and prejudices. The utilization of data collected in transaction logs of web search engines helps designers, researchers and web site managers to find complex interactions of users’ goals and behaviours to increase efficiency and effectiveness of websites. Before starting any analysis it should be observed that the log file of the web site contain enough information, otherwise analyser wouldn’t be able to create complete report. In this study we evaluate the website of Information Management Department of Hacettepe University by analysing the server log files. Results show that there is not adequate amount of information in log files which are provided by web site server. The reports which we have created have some information about users’ behaviour and need but they are not sufficient for taking ideal decisions about contents & hyperlink structure of website. It also provides that creating an extended log file is essential for the website. Finally we believe that results can be helpful to improve, redesign and create better website.

The design and implementation about the project of optimizing proxy servers

International Nuclear Information System (INIS)

Wu Ling; Liu Baoxu

2006-01-01

Proxy server is an important facility in the network of an organization, which play an important role in security and access control and accelerating access of Internet. This article introduces the action of proxy servers, and expounds the resolutions to optimize proxy servers at IHEP: integration, dynamic domain name resolves and data synchronization. (authors)

Rclick: a web server for comparison of RNA 3D structures.

Science.gov (United States)

Nguyen, Minh N; Verma, Chandra

2015-03-15

RNA molecules play important roles in key biological processes in the cell and are becoming attractive for developing therapeutic applications. Since the function of RNA depends on its structure and dynamics, comparing and classifying the RNA 3D structures is of crucial importance to molecular biology. In this study, we have developed Rclick, a web server that is capable of superimposing RNA 3D structures by using clique matching and 3D least-squares fitting. Our server Rclick has been benchmarked and compared with other popular servers and methods for RNA structural alignments. In most cases, Rclick alignments were better in terms of structure overlap. Our server also recognizes conformational changes between structures. For this purpose, the server produces complementary alignments to maximize the extent of detectable similarity. Various examples showcase the utility of our web server for comparison of RNA, RNA-protein complexes and RNA-ligand structures. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Multivariate statistical monitoring as applied to clean-in-place (CIP) and steam-in-place (SIP) operations in biopharmaceutical manufacturing.

Science.gov (United States)

Roy, Kevin; Undey, Cenk; Mistretta, Thomas; Naugle, Gregory; Sodhi, Manbir

2014-01-01

Multivariate statistical process monitoring (MSPM) is becoming increasingly utilized to further enhance process monitoring in the biopharmaceutical industry. MSPM can play a critical role when there are many measurements and these measurements are highly correlated, as is typical for many biopharmaceutical operations. Specifically, for processes such as cleaning-in-place (CIP) and steaming-in-place (SIP, also known as sterilization-in-place), control systems typically oversee the execution of the cycles, and verification of the outcome is based on offline assays. These offline assays add to delays and corrective actions may require additional setup times. Moreover, this conventional approach does not take interactive effects of process variables into account and cycle optimization opportunities as well as salient trends in the process may be missed. Therefore, more proactive and holistic online continued verification approaches are desirable. This article demonstrates the application of real-time MSPM to processes such as CIP and SIP with industrial examples. The proposed approach has significant potential for facilitating enhanced continuous verification, improved process understanding, abnormal situation detection, and predictive monitoring, as applied to CIP and SIP operations. © 2014 American Institute of Chemical Engineers.

Adventures in the evolution of a high-bandwidth network for central servers

International Nuclear Information System (INIS)

Swartz, K.L.; Cottrell, L.; Dart, M.

1994-08-01

In a small network, clients and servers may all be connected to a single Ethernet without significant performance concerns. As the number of clients on a network grows, the necessity of splitting the network into multiple sub-networks, each with a manageable number of clients, becomes clear. Less obvious is what to do with the servers. Group file servers on subnets and multihomed servers offer only partial solutions -- many other types of servers do not lend themselves to a decentralized model, and tend to collect on another, well-connected but overloaded Ethernet. The higher speed of FDDI seems to offer an easy solution, but in practice both expense and interoperability problems render FDDI a poor choice. Ethernet switches appear to permit cheaper and more reliable networking to the servers while providing an aggregate network bandwidth greater than a simple Ethernet. This paper studies the evolution of the server networks at SLAC. Difficulties encountered in the deployment of FDDI are described, as are the tools and techniques used to characterize the traffic patterns on the server network. Performance of Ethernet, FDDI, and switched Ethernet networks is analyzed, as are reliability and maintainability issues for these alternatives. The motivations for re-designing the SLAC general server network to use a switched Ethernet instead of FDDI are described, as are the reasons for choosing FDDI for the farm and firewall networks at SLAC. Guidelines are developed which may help in making this choice for other networks

Deep Recurrent Model for Server Load and Performance Prediction in Data Center

Directory of Open Access Journals (Sweden)

Zheng Huang

2017-01-01

Full Text Available Recurrent neural network (RNN has been widely applied to many sequential tagging tasks such as natural language process (NLP and time series analysis, and it has been proved that RNN works well in those areas. In this paper, we propose using RNN with long short-term memory (LSTM units for server load and performance prediction. Classical methods for performance prediction focus on building relation between performance and time domain, which makes a lot of unrealistic hypotheses. Our model is built based on events (user requests, which is the root cause of server performance. We predict the performance of the servers using RNN-LSTM by analyzing the log of servers in data center which contains user’s access sequence. Previous work for workload prediction could not generate detailed simulated workload, which is useful in testing the working condition of servers. Our method provides a new way to reproduce user request sequence to solve this problem by using RNN-LSTM. Experiment result shows that our models get a good performance in generating load and predicting performance on the data set which has been logged in online service. We did experiments with nginx web server and mysql database server, and our methods can been easily applied to other servers in data center.

Standby-Loss Elimination in Server Power Supply

Directory of Open Access Journals (Sweden)

Jong-Woo Kim

2017-07-01

Full Text Available In a server power system, a standby converter is required in order to provide the standby output, monitor the system’s status, and communicate with the server power system. Since these functions are always required, losses from the standby converter are produced even though the system operates in normal mode. For these reasons, the losses deteriorate the total efficiency of the system. In this paper, a new structure is proposed to eliminate the losses from the standby converter of a server power supply. The key feature of the proposed structure is that the main direct current (DC/DC converter substitutes all of the output power of the standby converter, and the standby converter is turned off in normal mode. With the proposed structure, the losses from the standby converter can be eliminated in normal mode, and this leads to a higher efficiency in overall load conditions. Although the structure has been proposed in the previous work, very important issues such as a steady state analysis, the transient responses, and how to control the standby converter are not discussed. This paper presents these issues further. The feasibility of the proposed structure has been verified with 400 V link voltage, 12 V/62.5 A main output, and a 12 V/2.1 A standby output server power system.

Hierarchical Communication Network Architectures for Offshore Wind Power Farms

Directory of Open Access Journals (Sweden)

Mohamed A. Ahmed

2014-05-01

Full Text Available Nowadays, large-scale wind power farms (WPFs bring new challenges for both electric systems and communication networks. Communication networks are an essential part of WPFs because they provide real-time control and monitoring of wind turbines from a remote location (local control center. However, different wind turbine applications have different requirements in terms of data volume, latency, bandwidth, QoS, etc. This paper proposes a hierarchical communication network architecture that consist of a turbine area network (TAN, farm area network (FAN, and control area network (CAN for offshore WPFs. The two types of offshore WPFs studied are small-scale WPFs close to the grid and medium-scale WPFs far from the grid. The wind turbines are modelled based on the logical nodes (LN concepts of the IEC 61400-25 standard. To keep pace with current developments in wind turbine technology, the network design takes into account the extension of the LNs for both the wind turbine foundation and meteorological measurements. The proposed hierarchical communication network is based on Switched Ethernet. Servers at the control center are used to store and process the data received from the WPF. The network architecture is modelled and evaluated via OPNET. We investigated the end-to-end (ETE delay for different WPF applications. The results are validated by comparing the amount of generated sensing data with that of received traffic at servers. The network performance is evaluated, analyzed and discussed in view of end-to-end (ETE delay for different link bandwidths.

Experimental Evaluation of a SIP-Based Home Gateway with Multiple Wireless Interfaces for Domotics Systems

Directory of Open Access Journals (Sweden)

Rosario G. Garroppo

2012-01-01

Full Text Available In modern houses, the presence of sensors and actuators is increasing, while communication services and entertainment systems had long since settled into everyday life. The utilization of wireless communication technologies, such as ZigBee, Wi-Fi, and Bluetooth, is attractive because of their short installation times and low costs. The research is moving towards the integration of the various home appliances and devices into a single domotics system, able to exploit the cooperation among the diverse subsystems and offer the end-user a single multiservice platform. In this scenario, the paper presents the experimental evaluation of a domotics framework centered on a SIP-based home gateway (SHG. While SIP is used to build a common control plane, the SHG is in charge of translating the user commands from and to the specific domotics languages. The analysis has been devoted to assess both the performance of the SHG software framework and the negative effects produced by the simultaneous interference among the three widespread wireless technologies.

Client-server password recovery

NARCIS (Netherlands)

Chmielewski, Ł.; Hoepman, J.H.; Rossum, P. van

2009-01-01

Human memory is not perfect - people constantly memorize new facts and forget old ones. One example is forgetting a password, a common problem raised at IT help desks. We present several protocols that allow a user to automatically recover a password from a server using partial knowledge of the

Design and construction of the SIPPING for fuels of the TRIGA Mark III reactor

International Nuclear Information System (INIS)

Castaneda J, G.; Delfin L, A.; Alvarado P, R.; Mazon R, R.; Ortega V, B.

2003-01-01

The sipping technique, it has been used by several possessors of nuclear research reactors in its irradiated nuclear fuels, likewise in some fuel storage sites, with the objective of to determine the quantity of radioactivity that the fuel liberates in the means in that it is. The irradiated fuel in storage of some nuclear research reactors, its can have cracks that cross the cladding of the same one, generating the liberation of fission products that its need to determine to maintain safety measures appropriate as much as the fuel as of the facilities where they are. It doesn't exist until now, some method published for the non destructive sipping test technique. Based on that described, the Reactor Department of the National Institute of Nuclear Research, it has designed and built an inspection system of irradiated fuel that it will allow the detection of gassy fission products in site, and solids by means of the measurement of the activity of the Cs-137 contained in water samples. (Author)

Analisis Perbandingan Unjuk Kerja Sistem Penyeimbang Beban Web Server dengan HAProxy dan Pound Links

Directory of Open Access Journals (Sweden)

Dite Ardian

2013-04-01

Full Text Available The development of internet technology has many organizations that expanded service website. Initially used single web server that is accessible to everyone through the Internet, but when the number of users that access the web server is very much the traffic load to the web server and the web server anyway. It is necessary for the optimization of web servers to cope with the overload received by the web server when traffic is high. Methodology of this final project research include the study of literature, system design, and testing of the system. Methods from the literature reference books related as well as from several sources the internet. The design of this thesis uses Haproxy and Pound Links as a load balancing web server. The end of this reaserch is testing the network system, where the system will be tested this stage so as to create a web server system that is reliable and safe. The result is a web server system that can be accessed by many user simultaneously rapidly as load balancing Haproxy and Pound Links system which is set up as front-end web server performance so as to create a web server that has performance and high availability.

Conversation Threads Hidden within Email Server Logs

Science.gov (United States)

Palus, Sebastian; Kazienko, Przemysław

Email server logs contain records of all email Exchange through this server. Often we would like to analyze those emails not separately but in conversation thread, especially when we need to analyze social network extracted from those email logs. Unfortunately each mail is in different record and those record are not tided to each other in any obvious way. In this paper method for discussion threads extraction was proposed together with experiments on two different data sets - Enron and WrUT..

Microsoft® Exchange Server 2007 Administrator's Companion

CERN Document Server

Glenn, Walter; Maher, Joshua

2009-01-01

Get your mission-critical messaging and collaboration systems up and running with the essential guide to deploying and managing Exchange Server 2007, now updated for SP1. This comprehensive administrator's reference covers the full range of server and client deployments, unified communications, security features, performance optimization, troubleshooting, and disaster recovery. It also includes four chapters on security policy, tools, and techniques to help protect messaging systems from viruses, spam, and phishing. Written by expert authors Walter Glenn and Scott Lowe, this reference deliver

Middleware for multi-client and multi-server mobile applications

NARCIS (Netherlands)

Rocha, B.P.S.; Rezende, C.G.; Loureiro, A.A.F.

2007-01-01

With popularization of mobile computing, many developers have faced problems due to great heterogeneity of devices. To address this issue, we present in this work a middleware for multi-client and multi-server mobile applications. We assume that the middleware at the server side has no resource

CCTOP: a Consensus Constrained TOPology prediction web server.

Science.gov (United States)

Dobson, László; Reményi, István; Tusnády, Gábor E

2015-07-01

The Consensus Constrained TOPology prediction (CCTOP; http://cctop.enzim.ttk.mta.hu) server is a web-based application providing transmembrane topology prediction. In addition to utilizing 10 different state-of-the-art topology prediction methods, the CCTOP server incorporates topology information from existing experimental and computational sources available in the PDBTM, TOPDB and TOPDOM databases using the probabilistic framework of hidden Markov model. The server provides the option to precede the topology prediction with signal peptide prediction and transmembrane-globular protein discrimination. The initial result can be recalculated by (de)selecting any of the prediction methods or mapped experiments or by adding user specified constraints. CCTOP showed superior performance to existing approaches. The reliability of each prediction is also calculated, which correlates with the accuracy of the per protein topology prediction. The prediction results and the collected experimental information are visualized on the CCTOP home page and can be downloaded in XML format. Programmable access of the CCTOP server is also available, and an example of client-side script is provided. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

2MASS Catalog Server Kit Version 2.1

Science.gov (United States)

Yamauchi, C.

2013-10-01

The 2MASS Catalog Server Kit is open source software for use in easily constructing a high performance search server for important astronomical catalogs. This software utilizes the open source RDBMS PostgreSQL, therefore, any users can setup the database on their local computers by following step-by-step installation guide. The kit provides highly optimized stored functions for positional searchs similar to SDSS SkyServer. Together with these, the powerful SQL environment of PostgreSQL will meet various user's demands. We released 2MASS Catalog Server Kit version 2.1 in 2012 May, which supports the latest WISE All-Sky catalog (563,921,584 rows) and 9 major all-sky catalogs. Local databases are often indispensable for observatories with unstable or narrow-band networks or severe use, such as retrieving large numbers of records within a small period of time. This software is the best for such purposes, and increasing supported catalogs and improvements of version 2.1 can cover a wider range of applications including advanced calibration system, scientific studies using complicated SQL queries, etc. Official page: http://www.ir.isas.jaxa.jp/~cyamauch/2masskit/

Development of intelligent instruments with embedded HTTP servers for control and data acquisition in a cryogenic setup—The hardware, firmware, and software implementation

International Nuclear Information System (INIS)

Antony, Joby; Mathuria, D. S.; Datta, T. S.; Maity, Tanmoy

2015-01-01

The power of Ethernet for control and automation technology is being largely understood by the automation industry in recent times. Ethernet with HTTP (Hypertext Transfer Protocol) is one of the most widely accepted communication standards today. Ethernet is best known for being able to control through internet from anywhere in the globe. The Ethernet interface with built-in on-chip embedded servers ensures global connections for crate-less model of control and data acquisition systems which have several advantages over traditional crate-based control architectures for slow applications. This architecture will completely eliminate the use of any extra PLC (Programmable Logic Controller) or similar control hardware in any automation network as the control functions are firmware coded inside intelligent meters itself. Here, we describe the indigenously built project of a cryogenic control system built for linear accelerator at Inter University Accelerator Centre, known as “CADS,” which stands for “Complete Automation of Distribution System.” CADS deals with complete hardware, firmware, and software implementation of the automated linac cryogenic distribution system using many Ethernet based embedded cryogenic instruments developed in-house. Each instrument works as an intelligent meter called device-server which has the control functions and control loops built inside the firmware itself. Dedicated meters with built-in servers were designed out of ARM (Acorn RISC (Reduced Instruction Set Computer) Machine) and ATMEL processors and COTS (Commercially Off-the-Shelf) SMD (Surface Mount Devices) components, with analog sensor front-end and a digital back-end web server implementing remote procedure call over HTTP for digital control and readout functions. At present, 24 instruments which run 58 embedded servers inside, each specific to a particular type of sensor-actuator combination for closed loop operations, are now deployed and distributed across control LAN

Development of intelligent instruments with embedded HTTP servers for control and data acquisition in a cryogenic setup—The hardware, firmware, and software implementation

Energy Technology Data Exchange (ETDEWEB)

Antony, Joby; Mathuria, D. S.; Datta, T. S. [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110067 (India); Maity, Tanmoy [Department of MME, Indian School of Mines (ISM), Dhanbad 826004 (India)

2015-12-15

The power of Ethernet for control and automation technology is being largely understood by the automation industry in recent times. Ethernet with HTTP (Hypertext Transfer Protocol) is one of the most widely accepted communication standards today. Ethernet is best known for being able to control through internet from anywhere in the globe. The Ethernet interface with built-in on-chip embedded servers ensures global connections for crate-less model of control and data acquisition systems which have several advantages over traditional crate-based control architectures for slow applications. This architecture will completely eliminate the use of any extra PLC (Programmable Logic Controller) or similar control hardware in any automation network as the control functions are firmware coded inside intelligent meters itself. Here, we describe the indigenously built project of a cryogenic control system built for linear accelerator at Inter University Accelerator Centre, known as “CADS,” which stands for “Complete Automation of Distribution System.” CADS deals with complete hardware, firmware, and software implementation of the automated linac cryogenic distribution system using many Ethernet based embedded cryogenic instruments developed in-house. Each instrument works as an intelligent meter called device-server which has the control functions and control loops built inside the firmware itself. Dedicated meters with built-in servers were designed out of ARM (Acorn RISC (Reduced Instruction Set Computer) Machine) and ATMEL processors and COTS (Commercially Off-the-Shelf) SMD (Surface Mount Devices) components, with analog sensor front-end and a digital back-end web server implementing remote procedure call over HTTP for digital control and readout functions. At present, 24 instruments which run 58 embedded servers inside, each specific to a particular type of sensor-actuator combination for closed loop operations, are now deployed and distributed across control LAN

A remote data access architecture for home-monitoring health-care applications.

Science.gov (United States)

Lin, Chao-Hung; Young, Shuenn-Tsong; Kuo, Te-Son

2007-03-01

With the aging of the population and the increasing patient preference for receiving care in their own homes, remote home care is one of the fastest growing areas of health care in Taiwan and many other countries. Many remote home-monitoring applications have been developed and implemented to enable both formal and informal caregivers to have remote access to patient data so that they can respond instantly to any abnormalities of in-home patients. The aim of this technology is to give both patients and relatives better control of the health care, reduce the burden on informal caregivers and reduce visits to hospitals and thus result in a better quality of life for both the patient and his/her family. To facilitate their widespread adoption, remote home-monitoring systems take advantage of the low-cost features and popularity of the Internet and PCs, but are inherently exposed to several security risks, such as virus and denial-of-service (DoS) attacks. These security threats exist as long as the in-home PC is directly accessible by remote-monitoring users over the Internet. The purpose of the study reported in this paper was to improve the security of such systems, with the proposed architecture aimed at increasing the system availability and confidentiality of patient information. A broker server is introduced between the remote-monitoring devices and the in-home PCs. This topology removes direct access to the in-home PC, and a firewall can be configured to deny all inbound connections while the remote home-monitoring application is operating. This architecture helps to transfer the security risks from the in-home PC to the managed broker server, on which more advanced security measures can be implemented. The pros and cons of this novel architecture design are also discussed and summarized.

Client-Server Password Recovery

NARCIS (Netherlands)

Chmielewski, L.; Hoepman, J.H.; Rossum, P. van

2009-01-01

Human memory is not perfect – people constantly memorize new facts and forget old ones. One example is forgetting a password, a common problem raised at IT help desks. We present several protocols that allow a user to automatically recover a password from a server using partial knowledge of the

The Difference Between Using Proxy Server and VPN

Directory of Open Access Journals (Sweden)

David Dwiputra Kurniadi

2015-11-01

For example, looking for software, game through internet. But sometimes, there are some websites that cannot be opened as they have Internet Positive notificatio. To solve that problem, hacker found the solution by creating Proxy Server or VPN. In this time internet is very modern and very easy to access and there are a lot of Proxy Server and VPN that can be easly used.

An Array Library for Microsoft SQL Server with Astrophysical Applications

Science.gov (United States)

Dobos, L.; Szalay, A. S.; Blakeley, J.; Falck, B.; Budavári, T.; Csabai, I.

2012-09-01

Today's scientific simulations produce output on the 10-100 TB scale. This unprecedented amount of data requires data handling techniques that are beyond what is used for ordinary files. Relational database systems have been successfully used to store and process scientific data, but the new requirements constantly generate new challenges. Moving terabytes of data among servers on a timely basis is a tough problem, even with the newest high-throughput networks. Thus, moving the computations as close to the data as possible and minimizing the client-server overhead are absolutely necessary. At least data subsetting and preprocessing have to be done inside the server process. Out of the box commercial database systems perform very well in scientific applications from the prospective of data storage optimization, data retrieval, and memory management but lack basic functionality like handling scientific data structures or enabling advanced math inside the database server. The most important gap in Microsoft SQL Server is the lack of a native array data type. Fortunately, the technology exists to extend the database server with custom-written code that enables us to address these problems. We present the prototype of a custom-built extension to Microsoft SQL Server that adds array handling functionality to the database system. With our Array Library, fix-sized arrays of all basic numeric data types can be created and manipulated efficiently. Also, the library is designed to be able to be seamlessly integrated with the most common math libraries, such as BLAS, LAPACK, FFTW, etc. With the help of these libraries, complex operations, such as matrix inversions or Fourier transformations, can be done on-the-fly, from SQL code, inside the database server process. We are currently testing the prototype with two different scientific data sets: The Indra cosmological simulation will use it to store particle and density data from N-body simulations, and the Milky Way Laboratory

Towards Direct Manipulation and Remixing of Massive Data: The EarthServer Approach

Science.gov (United States)

Baumann, P.

2012-04-01