WorldWideScience

Sample records for single site catalysts

  1. Olefin polymerization from single site catalysts confined within porous media

    Science.gov (United States)

    Kasi, Rajeswari M.

    Single Site Catalysts (SSCs) have been utilized for olefin polymerization. Altering the metal-ligand architecture in the SSCs, polyolefin properties can be enhanced in a rational manner. This influence of the ligands in the SSC on the property of polyolefins prepared can be referred to as the primary ligand influence. Extending this understanding and subsequent control of the metal-ligand framework to the interaction of SSCs within organic and inorganic supports is vital for the synthesis of polyolefins with tailored properties. The motivation behind this thesis was to explore the support influence on the reactivity of the SSC tethered to a support matrix during ethylene homo and copolymerization. In order to address this question of the support influence on the final polyolefin properties, synthetic routes to covalently bind SSCs on different matrices have been explored. Two distinct supported SSCs have been used to prepare branched polyethylenes. Branched polyethylenes can be prepared by either copolymerization (ethylene and alpha-olefin) or oligomerization/copolymerization processes (ethylene and in situ generated alpha-olefin). Synthetic routes to prepare precursor catalysts to Constrained Geometry Catalysts (CGCs) by silyl elimination chemistry have been developed (Chapter 2). Efficient synthetic protocols to assemble CGCs on aminomethylpolysytrene matrices (Chapter 3) and amine-functionalized mesoporous silica (Chapter 4) are also reported. These supported catalysts, with appropriate cocatalysts have been used to prepare ethylene homo and copolymers, the polymer thermal properties and microstructures were analyzed by various analytical techniques. Branched polyethylenes (LLDPE) can be prepared by copolymerization chemistry. It has been observed is that the influence of the support is seen in the production of lower crystalline forms of high density polyethylene (HDPE, 20--50% crystalline), while homogeneous polymerization of analogous soluble CGCs afford HDPE

  2. Understanding the role of aluminum-based activators in single site iron catalysts for ethylene oligomerization.

    OpenAIRE

    Boudene , Zoubeyr; Boudier , Adrien; Breuil , Pierre-Alain; Olivier-Bourbigou , Hélène; Raybaud , Pascal; Toulhoat , Hervé; De Bruin , Theodorus

    2014-01-01

    International audience; In a combined experimental and theoretical study, the activation process of a single site ethylene oligomerization catalyst with aluminum-based activators has been studied. The results put forward a plausible deactivation reaction path of the catalyst for trimethylaluminum, while for methylaluminoxane and a novel phenoxyaluminum-based activator, the experimental catalyst's activity correlates with the energy barrier for the ethylene insertion.

  3. Single-Site Palladium(II) Catalyst for Oxidative Heck Reaction: Catalytic Performance and Kinetic Investigations

    Energy Technology Data Exchange (ETDEWEB)

    Duan, Hui; Li, Mengyang; Zhang, Guanghui; Gallagher, James R.; Huang, Zhiliang; Sun, Yu; Luo, Zhong; Chen, Hongzhong; Miller, Jeffrey T.; Zou, Ruqiang; Lei, Aiwen; Zhao, Yanli

    2015-01-01

    ABSTRACT: The development of organometallic single-site catalysts (SSCs) has inspired the designs of new heterogeneous catalysts with high efficiency. Nevertheless, the application of SSCs in certain modern organic reactions, such as C-C bond formation reactions, has still been less investigated. In this study, a single-site Pd(II) catalyst was developed, where 2,2'-bipyridine-grafted periodic mesoporous organosilica (PMO) was employed as the support of a Pd(II) complex. The overall performance of the single-site Pd(II) catalyst in the oxidative Heck reaction was then investigated. The investigation results show that the catalyst displays over 99% selectivity for the product formation with high reaction yield. Kinetic profiles further confirm its high catalytic efficiency, showing that the rate constant is nearly 40 times higher than that for the free Pd(II) salt. X-ray absorption spectroscopy reveals that the catalyst has remarkable lifetime and recyclability.

  4. Single-site catalyst promoters accelerate metal-catalyzed nitroarene hydrogenation

    KAUST Repository

    Wang, Liang

    2018-04-04

    Atomically dispersed supported metal catalysts are drawing wide attention because of the opportunities they offer for new catalytic properties combined with efficient use of the metals. We extend this class of materials to catalysts that incorporate atomically dispersed metal atoms as promoters. The catalysts are used for the challenging nitroarene hydrogenation and found to have both high activity and selectivity. The promoters are single-site Sn on TiO2 supports that incorporate metal nanoparticle catalysts. Represented as M/Sn-TiO2 (M = Au, Ru, Pt, Ni), these catalysts decidedly outperform the unpromoted supported metals, even for hydrogenation of nitroarenes substituted with various reducible groups. The high activity and selectivity of these catalysts result from the creation of oxygen vacancies on the TiO2 surface by single-site Sn, which leads to efficient, selective activation of the nitro group coupled with a reaction involving hydrogen atoms activated on metal nanoparticles.

  5. Catalytic water oxidation by single-site ruthenium catalysts.

    Science.gov (United States)

    Concepcion, Javier J; Jurss, Jonah W; Norris, Michael R; Chen, Zuofeng; Templeton, Joseph L; Meyer, Thomas J

    2010-02-15

    A series of monomeric ruthenium polypyridyl complexes have been synthesized and characterized, and their performance as water oxidation catalysts has been evaluated. The diversity of ligand environments and how they influence rates and reaction thermodynamics create a platform for catalyst design with controllable reactivity based on ligand variations.

  6. A stable rhodium single-site catalyst encapsulated within dendritic mesoporous nanochannels.

    Science.gov (United States)

    Tian, Jun; Yang, Dali; Wen, Jianguo; Filatov, Alexander S; Liu, Yuzi; Lei, Aiwen; Lin, Xiao-Min

    2018-01-18

    Catalysis plays an essential role in the modern chemical industry. However, it still remains a great challenge to improve the efficiency of many heterogeneous catalysts based on a per metal atom basis. Single-site catalysts (SsCs) with isolated metal atoms/ions anchored to the supports are thus highly desirable, providing an innovative solution towards highly efficient usage of precious metal atoms in heterogeneous catalysts. Creating SsCs with high metal loading proves to be challenging because, without robust anchoring, atoms tend to diffuse to form large aggregates during catalytic reactions. We report a facile ligand exchange method to anchor a single-site Rh catalyst inside the individual channels of three-dimensional dendritic mesoporous silica nanospheres (MSNSs). The short porous channels inside MSNSs provide an easy access of reactants and the strong binding of the ligand prevents the aggregation of catalyst sites. The as-synthesized Rh 1 @MSNS-NH 2 catalyst shows excellent activity, stability and reusability in the reduction of 4-nitrophenol. The same catalyst shows high regioselectivity in the hydrosilylation of terminal alkynes to yield α-vinylsilanes through the Markovnikov addition.

  7. Bis(benzimidazole)amine vanadium catalysts for olefin polymerisation and co-polymerisation: thermally robust, single-site catalysts activated by simple alkylaluminium reagents.

    Science.gov (United States)

    Tomov, Atanas K; Gibson, Vernon C; Zaher, Damien; Elsegood, Mark R J; Dale, Sophie H

    2004-09-07

    Vanadium complexes containing bis(benzimidazole)amine ligands, upon activation by simple alkylaluminium reagents, give unusually robust, single-site, catalysts for olefin polymerisation/co-polymerisation.

  8. Chemoselective single-site Earth-abundant metal catalysts at metal–organic framework nodes

    Energy Technology Data Exchange (ETDEWEB)

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X.; Urban, Ania; Thacker, Nathan C.; Lin, Wenbin (UC)

    2016-08-30

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal–organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C–H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

  9. Chemoselective single-site Earth-abundant metal catalysts at metal-organic framework nodes.

    Science.gov (United States)

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X; Urban, Ania; Thacker, Nathan C; Lin, Wenbin

    2016-08-30

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal-organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C-H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

  10. Sintering-resistant Single-Site Nickel Catalyst Supported by Metal-Organic Framework

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhanyong; Schweitzer, Neil; League, Aaron; Bernales Candia, Sandra Varinia; Peters, Aaron; Getsoian, Andrew G.; Wang, Timothy; Miller, Jeffrey T.; Vjunov, Aleksei; Fulton, John L.; Lercher, Johannes A.; Cramer, Christopher J.; Gagliardi, Laura; Hupp, Joseph; Farha, Omar

    2016-02-17

    Developing supported single-site catalysts is an important goal in heterogeneous catalysis, since the well-defined active sites afford opportunities for detailed mechanistic studies, thereby facilitating the design of improved catalysts. We present herein a method for installing Ni ions uniformly and precisely on the node of a Zr-based MOF, NU-1000, in high density and large quantity (denoted as Ni-AIM) using atomic layer deposition (ALD) in a metal–organic framework (MOF) (AIM). Ni-AIM is demonstrated to be an efficient gas-phase hydrogenation catalyst upon activation. The structure of the active sites in Ni-AIM is proposed, revealing its single-site nature. More importantly, due to the organic linker used to construct the MOF support, the Ni ions stay isolated throughout the hydrogenation catalysis, in accord with its long-term stability. A quantum chemical characterization of the catalyst and the catalytic process complements the experimental results. With validation of computational modeling protocols, we further targeted ethylene oligomerization catalysis by Ni-AIM guided by theoretical prediction. Given the generality of the AIM methodology, this emerging class of materials should prove ripe for the discovery of new catalysts for the transformation of volatile substrates.

  11. Sintering-Resistant Single-Site Nickel Catalyst Supported by Metal-Organic Framework.

    Science.gov (United States)

    Li, Zhanyong; Schweitzer, Neil M; League, Aaron B; Bernales, Varinia; Peters, Aaron W; Getsoian, Andrew Bean; Wang, Timothy C; Miller, Jeffrey T; Vjunov, Aleksei; Fulton, John L; Lercher, Johannes A; Cramer, Christopher J; Gagliardi, Laura; Hupp, Joseph T; Farha, Omar K

    2016-02-17

    Developing supported single-site catalysts is an important goal in heterogeneous catalysis since the well-defined active sites afford opportunities for detailed mechanistic studies, thereby facilitating the design of improved catalysts. We present herein a method for installing Ni ions uniformly and precisely on the node of a Zr-based metal-organic framework (MOF), NU-1000, in high density and large quantity (denoted as Ni-AIM) using atomic layer deposition (ALD) in a MOF (AIM). Ni-AIM is demonstrated to be an efficient gas-phase hydrogenation catalyst upon activation. The structure of the active sites in Ni-AIM is proposed, revealing its single-site nature. More importantly, due to the organic linker used to construct the MOF support, the Ni ions stay isolated throughout the hydrogenation catalysis, in accord with its long-term stability. A quantum chemical characterization of the catalyst and the catalytic process complements the experimental results. With validation of computational modeling protocols, we further targeted ethylene oligomerization catalysis by Ni-AIM guided by theoretical prediction. Given the generality of the AIM methodology, this emerging class of materials should prove ripe for the discovery of new catalysts for the transformation of volatile substrates.

  12. Metal–organic and covalent organic frameworks as single-site catalysts

    Science.gov (United States)

    Rogge, S. M. J.; Bavykina, A.; Hajek, J.; Garcia, H.; Olivos-Suarez, A. I.; Sepúlveda-Escribano, A.; Vimont, A.; Clet, G.; Bazin, P.; Kapteijn, F.

    2017-01-01

    Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions. PMID:28338128

  13. Single-Site Heterogeneous Catalysts: Innovations, Advantages, and Future Potential in Green Chemistry and Sustainable Technology

    Science.gov (United States)

    Raja, Robert; Thomas, John Meurig

    The advantages that flow from the availability of single-site heterogeneous catalysts are many. They facilitate the determination of the kinetics and mechanism of catalytic turnover and render accessible the energetics of various intermediates. More importantly, it is possible to prepare soluble molecular fragments that circumscribe the single site, thus enabling a direct comparison to be made between the catalytic performance of the same active site when functioning as a heterogeneous or a homogeneous catalyst. Our approach adopts the principles and practices of solid-state chemistry, augmented by lessons derived from enzymology, as well as computational chemistry. We have succeeded in designing a range of new catalysts to effect, inter alia, shape-selective, regioselective, bifunctional, and enantioselective catalytic conversions. In particular, large fractions of these catalysts are ideally suited for the era of clean technology in which single-step and/or solvent-free processes abound, and in which benign oxidants such as air or oxygen and inexpensive nanoporous materials are employed.

  14. Homogeneity of Surface Sites in Supported Single-Site Metal Catalysts: Assessment with Band Widths of Metal Carbonyl Infrared Spectra.

    Science.gov (United States)

    Hoffman, Adam S; Fang, Chia-Yu; Gates, Bruce C

    2016-10-06

    Determining and controlling the uniformity of isolated metal sites on surfaces of supports are central goals in investigations of single-site catalysts because well-defined species provide opportunities for fundamental understanding of the surface sites. CO is a useful probe of surface metal sites, often reacting with them to form metal carbonyls, the infrared spectra of which provide insights into the nature of the sites and the metal-support interface. Metals bonded to various support surface sites give broad bands in the spectra, and when narrow bands are observed, they indicate a high degree of uniformity of the metal sites. Much recent work on single-site catalysts has been done with supports that are inherently nonuniform, giving supported metal species that are therefore nonuniform. Herein we summarize values of ν CO data characterizing supported iridium gem-dicarbonyls, showing that the most nearly uniform of them are those supported on zeolites and the least uniform are those supported on metal oxides. Guided by ν CO data of supported iridium gem-dicarbonyls, we have determined new, general synthesis methods to maximize the degree of uniformity of iridium species on zeolites and on MgO. We report results for a zeolite HY-supported iridium gem-dicarbonyl with full width at half-maximum values of only 4.6 and 5.2 cm -1 characterizing the symmetric and asymmetric CO stretches and implying that this is the most nearly uniform supported single-site metal catalyst.

  15. Synthesis of a molecularly defined single-active site heterogeneous catalyst for selective oxidation of N-heterocycles.

    Science.gov (United States)

    Zhang, Yujing; Pang, Shaofeng; Wei, Zhihong; Jiao, Haijun; Dai, Xingchao; Wang, Hongli; Shi, Feng

    2018-04-13

    Generally, a homogeneous catalyst exhibits good activity and defined active sites but it is difficult to recycle. Meanwhile, a heterogeneous catalyst can easily be reused but its active site is difficult to reveal. It is interesting to bridge the gap between homogeneous and heterogeneous catalysis via controllable construction of a heterogeneous catalyst containing defined active sites. Here, we report that a molecularly defined, single-active site heterogeneous catalyst has been designed and prepared via the oxidative polymerization of maleimide derivatives. These polymaleimide derivatives can be active catalysts for the selective oxidation of heterocyclic compounds to quinoline and indole via the recycling of -C=O and -C-OH groups, which was confirmed by tracing the reaction with GC-MS using maleimide as the catalyst and by FT-IR analysis with polymaleimide as the catalyst. These results might promote the development of heterogeneous catalysts with molecularly defined single active sites exhibiting a comparable activity to homogeneous catalysts.

  16. Reactivity of a Carbon-Supported Single-Site Molybdenum Dioxo Catalyst for Biodiesel Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Mouat, Aidan R.; Lohr, Tracy L.; Wegener, Evan C.; Miller, Jeffrey T.; Delferro, Massimiliano; Stair, Peter C.; Marks, Tobin J.

    2016-08-23

    A single-site molybdenum dioxo catalyst, (Oc)2Mo(=O)2@C, was prepared via direct grafting of MoO2Cl2(dme) (dme = 1,2-dimethoxyethane) on high-surface- area activated carbon. The physicochemical and chemical properties of this catalyst were fully characterized by N2 physisorption, ICP-AES/OES, PXRD, STEM, XPS, XAS, temperature-programmed reduction with H2 (TPR-H2), and temperature-programmed NH3 desorption (TPD-NH3). The single-site nature of the Mo species is corroborated by XPS and TPR-H2 data, and it exhibits the lowest reported MoOx Tmax of reduction reported to date, suggesting a highly reactive MoVI center. (Oc)2Mo(=O)2@C catalyzes the transesterification of a variety of esters and triglycerides with ethanol, exhibiting high activity at moderate temperatures (60-90 °C) and with negligible deactivation. (Oc)2Mo(=O)2@C is resistant to water and can be recycled at least three times with no loss of activity. The transesterification reaction is determined experimentally to be first order in [ethanol] and first order in [Mo] with ΔH = 10.5(8) kcal mol-1 and ΔS = -32(2) eu. The low energy of activation is consistent with the moderate conditions needed to achieve rapid turnover. This highly active carbon-supported single-site molybdenum dioxo species is thus an efficient, robust, and lowcost catalyst with significant potential for transesterification processes.

  17. Catalysis by Design: Well-Defined Single-Site Heterogeneous Catalysts

    KAUST Repository

    Pelletier, Jeremie

    2016-03-09

    ConspectusHeterogeneous catalysis, a field important industrially and scientifically, is increasingly seeking and refining strategies to render itself more predictable. The main issue is due to the nature and the population of catalytically active sites. Their number is generally low to very low, their "acid strengths" or " redox properties" are not homogeneous, and the material may display related yet inactive sites on the same material. In many heterogeneous catalysts, the discovery of a structure-activity reationship is at best challenging. One possible solution is to generate single-site catalysts in which most, if not all, of the sites are structurally identical. Within this context and using the right tools, the catalyst structure can be designed and well-defined, to reach a molecular understanding. It is then feasible to understand the structure-activity relationship and to develop predictable heterogeneous catalysis. Single-site well-defined heterogeneous catalysts can be prepared using concepts and tools of surface organometallic chemistry (SOMC). This approach operates by reacting organometallic compounds with surfaces of highly divided oxides (or of metal nanoparticles). This strategy has a solid track record to reveal structure-activity relationship to the extent that it is becoming now quite predictable. Almost all elements of the periodical table have been grafted on surfaces of oxides (from simple oxides such as silica or alumina to more sophisticated materials regarding composition or porosity).Considering catalytic hydrocarbon transformations, heterogeneous catalysis outcome may now be predicted based on existing mechanistic proposals and the rules of molecular chemistry (organometallic, organic) associated with some concepts of surface sciences. A thorough characterization of the grafted metal centers must be carried out using tools spanning from molecular organometallic or surface chemistry. By selection of the metal, its ligand set, and the

  18. Catalysis by Design: Well-Defined Single-Site Heterogeneous Catalysts.

    Science.gov (United States)

    Pelletier, Jérémie D A; Basset, Jean-Marie

    2016-04-19

    Heterogeneous catalysis, a field important industrially and scientifically, is increasingly seeking and refining strategies to render itself more predictable. The main issue is due to the nature and the population of catalytically active sites. Their number is generally low to very low, their "acid strengths" or " redox properties" are not homogeneous, and the material may display related yet inactive sites on the same material. In many heterogeneous catalysts, the discovery of a structure-activity reationship is at best challenging. One possible solution is to generate single-site catalysts in which most, if not all, of the sites are structurally identical. Within this context and using the right tools, the catalyst structure can be designed and well-defined, to reach a molecular understanding. It is then feasible to understand the structure-activity relationship and to develop predictable heterogeneous catalysis. Single-site well-defined heterogeneous catalysts can be prepared using concepts and tools of surface organometallic chemistry (SOMC). This approach operates by reacting organometallic compounds with surfaces of highly divided oxides (or of metal nanoparticles). This strategy has a solid track record to reveal structure-activity relationship to the extent that it is becoming now quite predictable. Almost all elements of the periodical table have been grafted on surfaces of oxides (from simple oxides such as silica or alumina to more sophisticated materials regarding composition or porosity). Considering catalytic hydrocarbon transformations, heterogeneous catalysis outcome may now be predicted based on existing mechanistic proposals and the rules of molecular chemistry (organometallic, organic) associated with some concepts of surface sciences. A thorough characterization of the grafted metal centers must be carried out using tools spanning from molecular organometallic or surface chemistry. By selection of the metal, its ligand set, and the support taken

  19. Single-site SBA-15 supported zirconium catalysts. Synthesis, characterization and toward cyanosilylation reaction

    International Nuclear Information System (INIS)

    Xu, Wei; Yu, Bo; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    Graphical abstract: Ligand-modified signal-site SBA-15 supported zirconium catalysts were synthesized by SOMC method and characterized by a variety of techniques. The zirconium surface complexes show high catalytic efficiency for cyanosilylation of benzaldehyde. - Highlights: • Some Zr active species have been anchored on the surface of SBA-15 by SOMC technique. • The structures of the Zr species have been characterized by a variety of techniques. • The anchored Zr species are single-sited surface complexes. • The Zr surface complexes are catalytic active for cyanosilylation of benzaldehyde. - Abstract: A successive anchoring of Zr(NMe 2 ) 4 , cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on dehydroxylated SBA-15 pretreated at 500 °C for 16 h (SBA-15 -500 ) was conducted by SOMC strategy in moderate conditions. The dehydoxylation of SBA-15 was monitored by in situ Fourier transform infrared spectroscopy (in situ FT-IR). The ligand-modified SBA-15 -500 supported zirconium complexes were characterized by in situ FT-IR, 13 C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectrometry (ICP-MAS) and elemental analysis in detail, verifying that the surface zirconium species are single-sited. The catalytic activity of these complexes was evaluated by cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the structure of surface species and the configuration of the ligands

  20. Single-site SBA-15 supported zirconium catalysts. Synthesis, characterization and toward cyanosilylation reaction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Wei; Yu, Bo; Zhang, Ying; Chen, Xi; Zhang, Guofang, E-mail: gfzhang@snnu.edu.cn; Gao, Ziwei, E-mail: zwgao@snnu.edu.cn

    2015-01-15

    Graphical abstract: Ligand-modified signal-site SBA-15 supported zirconium catalysts were synthesized by SOMC method and characterized by a variety of techniques. The zirconium surface complexes show high catalytic efficiency for cyanosilylation of benzaldehyde. - Highlights: • Some Zr active species have been anchored on the surface of SBA-15 by SOMC technique. • The structures of the Zr species have been characterized by a variety of techniques. • The anchored Zr species are single-sited surface complexes. • The Zr surface complexes are catalytic active for cyanosilylation of benzaldehyde. - Abstract: A successive anchoring of Zr(NMe{sub 2}){sub 4}, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on dehydroxylated SBA-15 pretreated at 500 °C for 16 h (SBA-15{sub -500}) was conducted by SOMC strategy in moderate conditions. The dehydoxylation of SBA-15 was monitored by in situ Fourier transform infrared spectroscopy (in situ FT-IR). The ligand-modified SBA-15{sub -500} supported zirconium complexes were characterized by in situ FT-IR, {sup 13}C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectrometry (ICP-MAS) and elemental analysis in detail, verifying that the surface zirconium species are single-sited. The catalytic activity of these complexes was evaluated by cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the structure of surface species and the configuration of the ligands.

  1. Design and Use of Nanostructured Single-Site Heterogeneous Catalysts for the Selective Transformation of Fine Chemicals

    Directory of Open Access Journals (Sweden)

    Vladimiro Dal Santo

    2010-05-01

    Full Text Available Nanostructured single-site heterogeneous catalysts possess the advantages of classical solid catalysts, in terms of easy recovery and recycling, together with a defined tailored chemical and steric environment around the catalytically active metal site. The use of inorganic oxide supports with selected shape and porosity at a nanometric level may have a relevant impact on the regio- and stereochemistry of the catalytic reaction. Analogously, by choosing the optimal preparation techniques to obtain spatially isolated and well-characterised active sites, it is possible to achieve performances that are comparable to (or, in the most favourable cases, better than those obtained with homogeneous systems. Such catalysts are therefore particularly suitable for the transformation of highly-functionalised fine chemicals and some relevant examples where high chemo-, regio- and stereoselectivity are crucial will be described.

  2. A Single-Site Iron(III-Salan Catalyst for Converting COS to Sulfur-Containing Polymers

    Directory of Open Access Journals (Sweden)

    Ge-Ge Gu

    2017-10-01

    Full Text Available An iron(III complex of tetradentate N,N′-disubstituted bis(aminophenoxide (designated as salan, a saturated version of the corresponding salen ligand with a sterically hindered organic base anchored on the ligand framework, can selectively mediate the conversion of carbonyl sulfide to sulfur-containing polymers by the copolymerization with epoxides. This single-site catalyst exhibits broad substrate scope, and the resultant copolymers have completely alternating structures. In addition, this catalyst is efficient in producing diblock copolymers, suggesting a living polymerization nature.

  3. Synthesis and Activity of A Single Active Site N-doped Electro-catalyst for Oxygen Reduction

    International Nuclear Information System (INIS)

    Bayati, Maryam; Scott, Keith

    2016-01-01

    Nitrogen doped carbon materials are promising oxygen reduction reaction (ORR) catalysts which could potentially replace platinum. However, despite extensive studies, their active sites are still controversial and their impact on overall ORR remains obscure. Herein, we present a method for preparation of a single active site catalyst based on cycling an iron-inserted N-doped carbon catalyst in a wide potential window firstly in sulfuric acid and later in alkaline solution to study the contribution of the remaining one active group in overall activity. Following preparation of the metal-inserted N-doped carbon catalyst (MINC), its morphology was characterized using X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and the electro-catalytic behavior was investigated by employing linear sweep voltammetry (LSV) using a rotating ring disk electrode (RRDE). XPS revealed that graphitic nitrogen was the only remaining active nitrogen-containing group after elimination the pyridinic and pyrrolic groups and also iron nano-materials removal confirmed from auger peak of Fe LMMa and poisoning reaction with cyanide. The C1 s XPS region data showed an increase in the oxygen reduction intermediate C-OH peak, after the reaction, which indicates electrocatalytic activity of the graphitic carbon. Electrochemical studies revealed no significant changes in limiting current, a small increase in H 2 O 2 production and 47 mV shift in half wave potential for degraded catalyst which is in line with previous theoretical calculations.

  4. Highly efficient one-step conversion of cyclohexane to adipic acid using single-site heterogeneous catalysts.

    Science.gov (United States)

    Raja, Robert; Thomas, John Meurig; Xu, Mingcan; Harris, Kenneth D M; Greenhill-Hooper, Michael; Quill, Kieran

    2006-01-28

    A solid source of 'active' oxygen (acetylperoxyborate, APB), when dissolved in aqueous solution in the presence of a single-site microporous catalyst containing redox centres (Fe(III)AlPO-31, Mn(III)AlPO-5, Fe(III)AlPO-5), converts cyclohexane with high efficiency (ca. 88%) and exceptionally high selectivity (ca. 81%) to adipic acid at 383 K; this procedure is also effective in converting styrene to styrene oxide and -pinene and (+)-limonene to their corresponding epoxides.

  5. Highly Stereoselective Heterogeneous Diene Polymerization by Co-MFU-4l: A Single-Site Catalyst Prepared by Cation Exchange.

    Science.gov (United States)

    Dubey, Romain J-C; Comito, Robert J; Wu, Zhenwei; Zhang, Guanghui; Rieth, Adam J; Hendon, Christopher H; Miller, Jeffrey T; Dincă, Mircea

    2017-09-13

    Molecular catalysts offer tremendous advantages for stereoselective polymerization because their activity and selectivity can be optimized and understood mechanistically using the familiar tools of organometallic chemistry. Yet, this exquisite control over selectivity comes at an operational price that is generally not justifiable for the large-scale manufacture of polyfolefins. In this report, we identify Co-MFU-4l, prepared by cation exchange in a metal-organic framework, as a solid catalyst for the polymerization of 1,3-butadiene with high stereoselectivity (>99% 1,4-cis). To our knowledge, this is the highest stereoselectivity achieved with a heterogeneous catalyst for this transformation. The polymer's low polydispersity (PDI ≈ 2) and the catalyst's ready recovery and low leaching indicate that our material is a structurally resilient single-site heterogeneous catalyst. Further characterization of Co-MFU-4l by X-ray absorption spectroscopy provided evidence for discrete, tris-pyrazolylborate-like coordination of Co(II). With this information, we identify a soluble cobalt complex that mimics the structure and reactivity of Co-MFU-4l, thus providing a well-defined platform for studying the catalytic mechanism in the solution phase. This work underscores the capacity for small molecule-like tunability and mechanistic tractability available to transition metal catalysis in metal-organic frameworks.

  6. Lability and Basicity of Bipyridine-Carboxylate-Phosphonate Ligand Accelerate Single-Site Water Oxidation by Ruthenium-Based Molecular Catalysts.

    Science.gov (United States)

    Shaffer, David W; Xie, Yan; Szalda, David J; Concepcion, Javier J

    2017-11-01

    A critical step in creating an artificial photosynthesis system for energy storage is designing catalysts that can thrive in an assembled device. Single-site catalysts have an advantage over bimolecular catalysts because they remain effective when immobilized. Hybrid water oxidation catalysts described here, combining the features of single-site bis-phosphonate catalysts and fast bimolecular bis-carboxylate catalysts, have reached turnover frequencies over 100 s -1 , faster than both related catalysts under identical conditions. The new [(bpHc)Ru(L) 2 ] (bpH 2 cH = 2,2'-bipyridine-6-phosphonic acid-6'-carboxylic acid, L = 4-picoline or isoquinoline) catalysts proceed through a single-site water nucleophilic attack pathway. The pendant phosphonate base mediates O-O bond formation via intramolecular atom-proton transfer with a calculated barrier of only 9.1 kcal/mol. Additionally, the labile carboxylate group allows water to bind early in the catalytic cycle, allowing intramolecular proton-coupled electron transfer to lower the potentials for oxidation steps and catalysis. That a single-site catalyst can be this fast lends credence to the possibility that the oxygen evolving complex adopts a similar mechanism.

  7. Lability and Basicity of Bipyridine-Carboxylate-Phosphonate Ligand Accelerate Single-Site Water Oxidation by Ruthenium-Based Molecular Catalysts

    International Nuclear Information System (INIS)

    Shaffer, David W.; Xie, Yan; Szalda, David J.; Concepcion, Javier J.

    2017-01-01

    Here, a critical step in creating an artificial photosynthesis system for energy storage is designing catalysts that can thrive in an assembled device. Single-site catalysts have an advantage over bimolecular catalysts because they remain effective when immobilized. Hybrid water oxidation catalysts described here, combining the features of single-site bis-phosphonate catalysts and fast bimolecular bis-carboxylate catalysts, have reached turnover frequencies over 100 s –1 , faster than both related catalysts under identical conditions. The new [(bpHc)Ru(L) 2 ] (bpH 2 cH = 2,2'-bipyridine-6-phosphonic acid-6'-carboxylic acid, L = 4-picoline or isoquinoline) catalysts proceed through a single-site water nucleophilic attack pathway. The pendant phosphonate base mediates O–O bond formation via intramolecular atom-proton transfer with a calculated barrier of only 9.1 kcal/mol. Additionally, the labile carboxylate group allows water to bind early in the catalytic cycle, allowing intramolecular proton-coupled electron transfer to lower the potentials for oxidation steps and catalysis. That a single-site catalyst can be this fast lends credence to the possibility that the oxygen evolving complex adopts a similar mechanism.

  8. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    International Nuclear Information System (INIS)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    A successive anchoring of Ti(NMe 2 ) 4 , cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, 13 C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands. - Graphical abstract: The ligand-tailored silica supported “single site” titanium complexes were synthesized by SOMC strategy and fully characterized. Their catalytic activity were evaluated by benzaldehyde silylcyanation. - Highlights: • Single-site silica supported Ti active species was prepared by SOMC technique. • O-donor ligand tailored Ti surface species was synthesized. • The surface species was characterized by XPS, 13 C CP-MAS NMR, XANES etc. • Catalytic activity of the Ti active species in silylcyanation reaction was evaluated

  9. Isospecific propylene polymerization with in situ generated bis(phenoxy-amine)zirconium and hafnium single site catalysts.

    Science.gov (United States)

    Makio, Haruyuki; Prasad, Aitha Vishwa; Terao, Hiroshi; Saito, Junji; Fujita, Terunori

    2013-07-07

    Bis(phenoxy-imine) Zr and Hf complexes were activated with (i)Bu3Al or (i)Bu2AlH in conjunction with Ph3CB(C6F5)4 and tested as catalysts for propylene polymerization with emphasis on the enantioselectivity of the isospecific species and the single site polymerization characteristics. The isoselective species was identified as the in situ generated bis(phenoxy-amine) complex whose isoselectivity was sensitive to subtle changes in ligand structure. By employing specific substituents at certain key positions the isotacticity reached an extremely high level comparable to high-end commercial isotactic polypropylenes (Tm > 160 °C). Single site polymerization characteristics depended upon the efficiency and selectivity of the in situ imine reduction which is sensitive to the substituent on the imine nitrogen and the reaction conditions. By using (i)Bu2AlH as a reducing agent, quantitative imine reduction can be achieved with a stoichiometric amount of the reducing agent. This lower alkylaluminum loading is beneficial for the catalyst and significantly enhances the polymerization activity and the molecular weight of the resultant polymer.

  10. Surface structural-chemical characterization of a single-site d0 heterogeneous arene hydrogenation catalyst having 100% active sites

    Science.gov (United States)

    Williams, Linda A.; Guo, Neng; Motta, Alessandro; Delferro, Massimiliano; Fragalà, Ignazio L.; Miller, Jeffrey T.; Marks, Tobin J.

    2013-01-01

    Structural characterization of the catalytically significant sites on solid catalyst surfaces is frequently tenuous because their fraction, among all sites, typically is quite low. Here we report the combined application of solid-state 13C-cross-polarization magic angle spinning nuclear magnetic resonance (13C-CPMAS-NMR) spectroscopy, density functional theory (DFT), and Zr X-ray absorption spectroscopy (XAS) to characterize the adsorption products and surface chemistry of the precatalysts (η5-C5H5)2ZrR2 (R = H, CH3) and [η5-C5(CH3)5]Zr(CH3)3 adsorbed on Brønsted superacidic sulfated alumina (AlS). The latter complex is exceptionally active for benzene hydrogenation, with ∼100% of the Zr sites catalytically significant as determined by kinetic poisoning experiments. The 13C-CPMAS-NMR, DFT, and XAS data indicate formation of organozirconium cations having a largely electrostatic [η5-C5(CH3)5]Zr(CH3)2+···AlS− interaction with greatly elongated Zr···OAlS distances of ∼2.35(2) Å. The catalytic benzene hydrogenation cycle is stepwise understandable by DFT, and proceeds via turnover-limiting H2 delivery to surface [η5-C5(CH3)5]ZrH2(benzene)+···AlS− species, observable by solid-state NMR and XAS. PMID:23269836

  11. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang, E-mail: gfzhang@snnu.edu.cn; Gao, Ziwei, E-mail: zwgao@snnu.edu.cn

    2015-01-15

    A successive anchoring of Ti(NMe{sub 2}){sub 4}, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, {sup 13}C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands. - Graphical abstract: The ligand-tailored silica supported “single site” titanium complexes were synthesized by SOMC strategy and fully characterized. Their catalytic activity were evaluated by benzaldehyde silylcyanation. - Highlights: • Single-site silica supported Ti active species was prepared by SOMC technique. • O-donor ligand tailored Ti surface species was synthesized. • The surface species was characterized by XPS, {sup 13}C CP-MAS NMR, XANES etc. • Catalytic activity of the Ti active species in silylcyanation reaction was evaluated.

  12. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    Science.gov (United States)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    A successive anchoring of Ti(NMe2)4, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1‧-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, 13C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands.

  13. Single-Site Active Iron-Based Bifunctional Oxygen Catalyst for a Compressible and Rechargeable Zinc-Air Battery.

    Science.gov (United States)

    Ma, Longtao; Chen, Shengmei; Pei, Zengxia; Huang, Yan; Liang, Guojin; Mo, Funian; Yang, Qi; Su, Jun; Gao, Yihua; Zapien, Juan Antonio; Zhi, Chunyi

    2018-02-27

    The exploitation of a high-efficient, low-cost, and stable non-noble-metal-based catalyst with oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) simultaneously, as air electrode material for a rechargeable zinc-air battery is significantly crucial. Meanwhile, the compressible flexibility of a battery is the prerequisite of wearable or/and portable electronics. Herein, we present a strategy via single-site dispersion of an Fe-N x species on a two-dimensional (2D) highly graphitic porous nitrogen-doped carbon layer to implement superior catalytic activity toward ORR/OER (with a half-wave potential of 0.86 V for ORR and an overpotential of 390 mV at 10 mA·cm -2 for OER) in an alkaline medium. Furthermore, an elastic polyacrylamide hydrogel based electrolyte with the capability to retain great elasticity even under a highly corrosive alkaline environment is utilized to develop a solid-state compressible and rechargeable zinc-air battery. The creatively developed battery has a low charge-discharge voltage gap (0.78 V at 5 mA·cm -2 ) and large power density (118 mW·cm -2 ). It could be compressed up to 54% strain and bent up to 90° without charge/discharge performance and output power degradation. Our results reveal that single-site dispersion of catalytic active sites on a porous support for a bifunctional oxygen catalyst as cathode integrating a specially designed elastic electrolyte is a feasible strategy for fabricating efficient compressible and rechargeable zinc-air batteries, which could enlighten the design and development of other functional electronic devices.

  14. Single-site SBA-15 supported zirconium catalysts. Synthesis, characterization and toward cyanosilylation reaction

    Science.gov (United States)

    Xu, Wei; Yu, Bo; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    A successive anchoring of Zr(NMe2)4, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1‧-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on dehydroxylated SBA-15 pretreated at 500 °C for 16 h (SBA-15-500) was conducted by SOMC strategy in moderate conditions. The dehydoxylation of SBA-15 was monitored by in situ Fourier transform infrared spectroscopy (in situ FT-IR). The ligand-modified SBA-15-500 supported zirconium complexes were characterized by in situ FT-IR, 13C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectrometry (ICP-MAS) and elemental analysis in detail, verifying that the surface zirconium species are single-sited. The catalytic activity of these complexes was evaluated by cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the structure of surface species and the configuration of the ligands.

  15. A Single Active Site Mutation in the Pikromycin Thioesterase Generates a More Effective Macrocyclization Catalyst.

    Science.gov (United States)

    Koch, Aaron A; Hansen, Douglas A; Shende, Vikram V; Furan, Lawrence R; Houk, K N; Jiménez-Osés, Gonzalo; Sherman, David H

    2017-09-27

    Macrolactonization of natural product analogs presents a significant challenge to both biosynthetic assembly and synthetic chemistry. In the preceding paper , we identified a thioesterase (TE) domain catalytic bottleneck processing unnatural substrates in the pikromycin (Pik) system, preventing the formation of epimerized macrolactones. Here, we perform molecular dynamics simulations showing the epimerized hexaketide was accommodated within the Pik TE active site; however, intrinsic conformational preferences of the substrate resulted in predominately unproductive conformations, in agreement with the observed hydrolysis. Accordingly, we engineered the stereoselective Pik TE to yield a variant (TE S148C ) with improved reaction kinetics and gain-of-function processing of an unnatural, epimerized hexaketide. Quantum mechanical comparison of model TE S148C and TE WT reaction coordinate diagrams revealed a change in mechanism from a stepwise addition-elimination (TE WT ) to a lower energy concerted acyl substitution (TE S148C ), accounting for the gain-of-function and improved reaction kinetics. Finally, we introduced the S148C mutation into a polyketide synthase module (PikAIII-TE) to impart increased substrate flexibility, enabling the production of diastereomeric macrolactones.

  16. Production of propylene from 1-butene on highly active "bi-functional single active site" catalyst: Tungsten carbene-hydride supported on alumina

    KAUST Repository

    Mazoyer, Etienne

    2011-12-02

    1-Butene is transformed in a continuous flow reactor over tungsten hydrides precursor W-H/Al2O3, 1, giving a promising yield into propylene at 150 °C and different pressures. Tungsten carbene-hydride single active site operates as a "bi-functional catalyst" through 1-butene isomerization on W-hydride and 1-butene/2-butenes cross-metathesis on W-carbene. This active moiety is generated in situ at the initiation steps by insertion of 1-butene on tungsten hydrides precursor W-H/Al2O3, 1 followed by α-H and β-H abstraction. © 2011 American Chemical Society.

  17. Stabilizing Single Sites on Solid Supports: Robust Grafted Ti(IV)-Calixarene Olefin Epoxidation Catalysts via Surface Polymerization and Cross-Linking

    OpenAIRE

    Guo, Yijun; Solovyov, Andrew; Grosso-Giordano, Nicolás A.; Hwang, Son-Jong; Katz, Alexander

    2016-01-01

    This manuscript develops a surface polymerization and cross-linking approach for the stabilization of single-site catalysts on solid surfaces, which is demonstrated here for grafted Ti(IV)-calixarene Lewis acids on silica. Our approach relies on cationic polymerization that is initiated by an adsorbed B(C_6F_5)_3 and uses styrene as the monomer and diisopropenylbenzene as the cross-linking agent. The mildness of this polymerization method is demonstrated by its lack of blocking micropores and...

  18. A Polymer Encapsulation Strategy to Synthesize Porous Nitrogen-Doped Carbon-Nanosphere-Supported Metal Isolated-Single-Atomic-Site Catalysts.

    Science.gov (United States)

    Han, Aijuan; Chen, Wenxing; Zhang, Shaolong; Zhang, Maolin; Han, Yunhu; Zhang, Jian; Ji, Shufang; Zheng, Lirong; Wang, Yu; Gu, Lin; Chen, Chen; Peng, Qing; Wang, Dingsheng; Li, Yadong

    2018-03-06

    A novel polymer encapsulation strategy to synthesize metal isolated-single-atomic-site (ISAS) catalysts supported by porous nitrogen-doped carbon nanospheres is reported. First, metal precursors are encapsulated in situ by polymers through polymerization; then, metal ISASs are created within the polymer-derived p-CN nanospheres by controlled pyrolysis at high temperature (200-900 °C). Transmission electron microscopy and N 2 sorption results reveal this material to exhibit a nanospheric morphology, a high surface area (≈380 m 2 g -1 ), and a porous structure (with micropores and mesopores). Characterization by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure confirms the metal to be present as metal ISASs. This methodology is applicable to both noble and nonprecious metals (M-ISAS/p-CN, M = Co, Ni, Cu, Mn, Pd, etc.). In particular, the Co-ISAS/p-CN nanospheres obtained using this method show comparable (E 1/2 = 0.838 V) electrochemical oxygen reduction activity to commercial Pt/C with 20 wt% Pt loading (E 1/2 = 0.834 V) in alkaline media, superior methanol tolerance, and outstanding stability, even after 5000 cycles. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Tuning the properties of metal–organic framework nodes as supports of single-site iridium catalysts: node modification by atomic layer deposition of aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Dong [Department of Chemical Engineering; University of California; Davis; USA; Momeni, Mohammad R. [Department of Chemistry; Chemical Theory Center; Supercomputing Institute; University of Minnesota; Minneapolis; Demir, Hakan [Department of Chemistry; Chemical Theory Center; Supercomputing Institute; University of Minnesota; Minneapolis; Pahls, Dale R. [Department of Chemistry; Chemical Theory Center; Supercomputing Institute; University of Minnesota; Minneapolis; Rimoldi, Martino [Department of Chemistry; Northwestern University; Evanston; USA; Wang, Timothy C. [Department of Chemistry; Northwestern University; Evanston; USA; Farha, Omar K. [Department of Chemistry; Northwestern University; Evanston; USA; Department of Chemistry; Hupp, Joseph T. [Department of Chemistry; Northwestern University; Evanston; USA; Cramer, Christopher J. [Department of Chemistry; Chemical Theory Center; Supercomputing Institute; University of Minnesota; Minneapolis; Gates, Bruce C. [Department of Chemical Engineering; University of California; Davis; USA; Gagliardi, Laura [Department of Chemistry; Chemical Theory Center; Supercomputing Institute; University of Minnesota; Minneapolis

    2017-01-01

    The metal–organic framework NU-1000, with Zr6-oxo, hydroxo, and aqua nodes, was modified by incorporation of hydroxylated Al(iii) ions by ALD-like chemistry with [Al(CH3)2(iso-propoxide)]2followed by steam (ALD = atomic layer deposition). Al ions were installed to the extent of approximately 7 per node. Single-site iridium diethylene complexes were anchored to the nodes of the modified and unmodified MOFs by reaction with Ir(C2H4)2(acac) (acac = acetylacetonate) and converted to Ir(CO)2complexes by treatment with CO. Infrared spectra of these supported complexes show that incorporation of Al weakened the electron donor tendency of the MOF. Correspondingly, the catalytic activity of the initial supported iridium complexes for ethylene hydrogenation increased, as did the selectivity for ethylene dimerization. The results of density functional theory calculations with a simplified model of the nodes incorporating Al(iii) ions are in qualitative agreement with some catalyst performance data.

  20. Engineering Single-Atom Cobalt Catalysts toward Improved Electrocatalysis.

    Science.gov (United States)

    Wan, Gang; Yu, Pengfei; Chen, Hangrong; Wen, Jianguo; Sun, Cheng-Jun; Zhou, Hua; Zhang, Nian; Li, Qianru; Zhao, Wanpeng; Xie, Bing; Li, Tao; Shi, Jianlin

    2018-04-01

    The development of cost-effective catalysts to replace noble metal is attracting increasing interests in many fields of catalysis and energy, and intensive efforts are focused on the integration of transition-metal sites in carbon as noble-metal-free candidates. Recently, the discovery of single-atom dispersed catalyst (SAC) provides a new frontier in heterogeneous catalysis. However, the electrocatalytic application of SAC is still subject to several theoretical and experimental limitations. Further advances depend on a better design of SAC through optimizing its interaction with adsorbates during catalysis. Here, distinctive from previous studies, favorable 3d electronic occupation and enhanced metal-adsorbates interactions in single-atom centers via the construction of nonplanar coordination is achieved, which is confirmed by advanced X-ray spectroscopic and electrochemical studies. The as-designed atomically dispersed cobalt sites within nonplanar coordination show significantly improved catalytic activity and selectivity toward the oxygen reduction reaction, approaching the benchmark Pt-based catalysts. More importantly, the illustration of the active sites in SAC indicates metal-natured catalytic sites and a media-dependent catalytic pathway. Achieving structural and electronic engineering on SAC that promotes its catalytic performances provides a paradigm to bridge the gap between single-atom catalysts design and electrocatalytic applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Characterization of active sites in zeolite catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, J. [Los Alamos National Lab., NM (United States); Bug, A. [Swarthmore Coll., PA (United States); Nicol, J.M. [MOLTECH (United States)] [and others

    1997-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Atomic-level details of the interaction of adsorbed molecules with active sites in catalysts are urgently needed to facilitate development of more effective and/or environmentally benign catalysts. To this end the authors have carried out neutron scattering studies combined with theoretical calculations of the dynamics of small molecules inside the cavities of zeolite catalysts. The authors have developed the use of H{sub 2} as a probe of adsorption sites by observing the hindered rotations of the adsorbed H{sub 2} molecule, and they were able to show that an area near the four-rings is the most likely adsorption site for H{sub 2} in zeolite A while adsorption of H{sub 2} near cations located on six-ring sites decreases in strength as Ni {approximately} Co > Ca > Zn {approximately} Na. Vibrational and rotational motions of ethylene and cyclopropane adsorption complexes were used as a measure for zeolite-adsorbate interactions. Preliminary studies of the binding of water, ammonia, and methylamines were carried out in a number of related guest-host materials.

  2. Catalyst Architecture for Stable Single Atom Dispersion Enables Site-Specific Spectroscopic and Reactivity Measurements of CO Adsorbed to Pt Atoms, Oxidized Pt Clusters, and Metallic Pt Clusters on TiO2.

    Science.gov (United States)

    DeRita, Leo; Dai, Sheng; Lopez-Zepeda, Kimberly; Pham, Nicholas; Graham, George W; Pan, Xiaoqing; Christopher, Phillip

    2017-10-11

    Oxide-supported precious metal nanoparticles are widely used industrial catalysts. Due to expense and rarity, developing synthetic protocols that reduce precious metal nanoparticle size and stabilize dispersed species is essential. Supported atomically dispersed, single precious metal atoms represent the most efficient metal utilization geometry, although debate regarding the catalytic activity of supported single precious atom species has arisen from difficulty in synthesizing homogeneous and stable single atom dispersions, and a lack of site-specific characterization approaches. We propose a catalyst architecture and characterization approach to overcome these limitations, by depositing ∼1 precious metal atom per support particle and characterizing structures by correlating scanning transmission electron microscopy imaging and CO probe molecule infrared spectroscopy. This is demonstrated for Pt supported on anatase TiO 2 . In these structures, isolated Pt atoms, Pt iso , remain stable through various conditions, and spectroscopic evidence suggests Pt iso species exist in homogeneous local environments. Comparing Pt iso to ∼1 nm preoxidized (Pt ox ) and prereduced (Pt metal ) Pt clusters on TiO 2 , we identify unique spectroscopic signatures of CO bound to each site and find CO adsorption energy is ordered: Pt iso ≪ Pt metal atoms bonded to TiO 2 and that Pt iso exhibits optimal reactivity because every atom is exposed for catalysis and forms an interfacial site with TiO 2 . This approach should be generally useful for studying the behavior of supported precious metal atoms.

  3. "Hydro-metathesis" of olefins: A catalytic reaction using a bifunctional single-site tantalum hydride catalyst supported on fibrous silica (KCC-1) nanospheres

    KAUST Repository

    Polshettiwar, Vivek

    2011-02-18

    Tantalizing hydrocarbons: Tantalum hydride supported on fibrous silica nanospheres (KCC-1) catalyzes, in the presence of hydrogen, the direct conversion of olefins into alkanes that have higher and lower numbers of carbon atoms (see scheme). This catalyst shows remarkable catalytic activity and stability, with excellent potential of regeneration. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Single-Atom Catalysts of Precious Metals for Electrochemical Reactions.

    Science.gov (United States)

    Kim, Jiwhan; Kim, Hee-Eun; Lee, Hyunjoo

    2018-01-10

    Single-atom catalysts (SACs), in which metal atoms are dispersed on the support without forming nanoparticles, have been used for various heterogeneous reactions and most recently for electrochemical reactions. In this Minireview, recent examples of single-atom electrocatalysts used for the oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), hydrogen evolution reaction (HER), formic acid oxidation reaction (FAOR), and methanol oxidation reaction (MOR) are introduced. Many density functional theory (DFT) simulations have predicted that SACs may be effective for CO 2 reduction to methane or methanol production while suppressing H 2 evolution, and those cases are introduced here as well. Single atoms, mainly Pt single atoms, have been deposited on TiN or TiC nanoparticles, defective graphene nanosheets, N-doped covalent triazine frameworks, graphitic carbon nitride, S-doped zeolite-templated carbon, and Sb-doped SnO 2 surfaces. Scanning transmission electron microscopy, extended X-ray absorption fine structure measurement, and in situ infrared spectroscopy have been used to detect the single-atom structure and confirm the absence of nanoparticles. SACs have shown high mass activity, minimizing the use of precious metal, and unique selectivity distinct from nanoparticle catalysts owing to the absence of ensemble sites. Additional features that SACs should possess for effective electrochemical applications were also suggested. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Highly Durable Platinum Single-Atom Alloy Catalyst for Electrochemical Reactions

    DEFF Research Database (Denmark)

    Kim, Jiwhan; Roh, Chi-Woo; Sahoo, Suman Kalyan

    2018-01-01

    -doped tin oxide (Pt1/ATO) is synthesized by conventional incipient wetness impregnation, with up to 8 wt% Pt. The single atomic Pt structure is confirmed by high-angle annular dark field scanning tunneling electron microscopy images and extended X-ray absorption fine structure analysis results. Density......Single atomic Pt catalyst can offer efficient utilization of the expensive platinum and provide unique selectivity because it lacks ensemble sites. However, designing such a catalyst with high Pt loading and good durability is very challenging. Here, single atomic Pt catalyst supported on antimony...... functional theory calculations show that replacing Sb sites with Pt atoms in the bulk phase or at the surface of SbSn or ATO is energetically favorable. The Pt1/ATO shows superior activity and durability for formic acid oxidation reaction, compared to a commercial Pt/C catalyst. The single atomic Pt...

  6. Conversion of actual flue gas CO 2 via cycloaddition to propylene oxide catalyzed by a single-site, recyclable zirconium catalyst

    KAUST Repository

    Kelly, Michael J.

    2017-06-12

    A reusable zirconium-based catalyst for the cycloaddition of CO2 to propylene oxide (PO) was prepared by the surface organometallic chemistry (SOMC) methodology. Accordingly, well-defined amounts of the ZrCl4·(OEt2)2 precursor were grafted on the surface of silica dehydroxylated at 700°C (SiO2-700) and at 200°C (SiO2-200) in order to afford surface coordination compounds with different podality and chemical environment. The identity of the surface complexes was thoroughly investigated by FT-IR, elemental microanalysis and solid state NMR and applied as a recoverable and reusable heterogeneous catalyst for the title reaction using pure CO2 and flue gas samples from a cement factory. The observed catalytic activity for the isolated zirconium complexes is rationalized by means of systematic DFT calculations.

  7. Thermally stable single-atom platinum-on-ceria catalysts via atom trapping

    Energy Technology Data Exchange (ETDEWEB)

    Jones, John; Xiong, Haifeng; DelaRiva, Andrew; Peterson, Eric J.; Pham, Hien; Challa, Sivakumar R.; Qi, Gongshin; Oh, Se H.; Wiebenga, Michelle H.; Pereira Hernandez, Xavier I.; Wang, Yong; Datye, Abhaya K.

    2016-07-08

    Catalysts based on single atoms of scarce precious metals can lead to more efficient use through enhanced reactivity and selectivity. However, single atoms on catalyst supports can be mobile and aggregate into nanoparticles when heated at elevated temperatures. High temperatures are detrimental to catalyst performance unless these mobile atoms can be trapped. We used ceria powders having similar surface areas but different exposed surface facets. When mixed with a platinum/ aluminum oxide catalyst and aged in air at 800°C, the platinum transferred to the ceria and was trapped. Polyhedral ceria and nanorods were more effective than ceria cubes at anchoring the platinum. Performing synthesis at high temperatures ensures that only the most stable binding sites are occupied, yielding a sinter-resistant, atomically dispersed catalyst.

  8. Single-Atom Catalyst of Platinum Supported on Titanium Nitride for Selective Electrochemical Reactions.

    Science.gov (United States)

    Yang, Sungeun; Kim, Jiwhan; Tak, Young Joo; Soon, Aloysius; Lee, Hyunjoo

    2016-02-05

    As a catalyst, single-atom platinum may provide an ideal structure for platinum minimization. Herein, a single-atom catalyst of platinum supported on titanium nitride nanoparticles were successfully prepared with the aid of chlorine ligands. Unlike platinum nanoparticles, the single-atom active sites predominantly produced hydrogen peroxide in the electrochemical oxygen reduction with the highest mass activity reported so far. The electrocatalytic oxidation of small organic molecules, such as formic acid and methanol, also exhibited unique selectivity on the single-atom platinum catalyst. A lack of platinum ensemble sites changed the reaction pathway for the oxygen-reduction reaction toward a two-electron pathway and formic acid oxidation toward direct dehydrogenation, and also induced no activity for the methanol oxidation. This work demonstrates that single-atom platinum can be an efficient electrocatalyst with high mass activity and unique selectivity. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Single-layer transition metal sulfide catalysts

    Science.gov (United States)

    Thoma, Steven G [Albuquerque, NM

    2011-05-31

    Transition Metal Sulfides (TMS), such as molybdenum disulfide (MoS.sub.2), are the petroleum industry's "workhorse" catalysts for upgrading heavy petroleum feedstocks and removing sulfur, nitrogen and other pollutants from fuels. We have developed an improved synthesis technique to produce SLTMS catalysts, such as molybdenum disulfide, with potentially greater activity and specificity than those currently available. Applications for this technology include heavy feed upgrading, in-situ catalysis, bio-fuel conversion and coal liquefaction.

  10. Towards ALD thin film stabilized single-atom Pd1 catalysts.

    Science.gov (United States)

    Piernavieja-Hermida, Mar; Lu, Zheng; White, Anderson; Low, Ke-Bin; Wu, Tianpin; Elam, Jeffrey W; Wu, Zili; Lei, Yu

    2016-08-18

    Supported precious metal single-atom catalysts have shown interesting activity and selectivity in recent studies. However, agglomeration of these highly mobile mononuclear surface species can eliminate their unique catalytic properties. Here we study a strategy for synthesizing thin film stabilized single-atom Pd1 catalysts using atomic layer deposition (ALD). The thermal stability of the Pd1 catalysts is significantly enhanced by creating a nanocavity thin film structure. In situ infrared spectroscopy and Pd K-edge X-ray absorption spectroscopy (XAS) revealed that the Pd1 was anchored on the surface through chlorine sites. The thin film stabilized Pd1 catalysts were thermally stable under both oxidation and reduction conditions. The catalytic performance in the methanol decomposition reaction is found to depend on the thickness of protecting layers. While Pd1 catalysts showed promising activity at low temperature in a methanol decomposition reaction, 14 cycle TiO2 protected Pd1 was less active at high temperature. Pd L3 edge XAS indicated that the low reactivity compared with Pd nanoparticles is due to the strong adsorption of carbon monoxide even at 250 °C. These results clearly show that the ALD nanocavities provide a basis for future design of single-atom catalysts that are highly efficient and stable.

  11. Nitrogen-Coordinated Single Cobalt Atom Catalysts for Oxygen Reduction in Proton Exchange Membrane Fuel Cells.

    Science.gov (United States)

    Wang, Xiao Xia; Cullen, David A; Pan, Yung-Tin; Hwang, Sooyeon; Wang, Maoyu; Feng, Zhenxing; Wang, Jingyun; Engelhard, Mark H; Zhang, Hanguang; He, Yanghua; Shao, Yuyan; Su, Dong; More, Karren L; Spendelow, Jacob S; Wu, Gang

    2018-03-01

    Due to the Fenton reaction, the presence of Fe and peroxide in electrodes generates free radicals causing serious degradation of the organic ionomer and the membrane. Pt-free and Fe-free cathode catalysts therefore are urgently needed for durable and inexpensive proton exchange membrane fuel cells (PEMFCs). Herein, a high-performance nitrogen-coordinated single Co atom catalyst is derived from Co-doped metal-organic frameworks (MOFs) through a one-step thermal activation. Aberration-corrected electron microscopy combined with X-ray absorption spectroscopy virtually verifies the CoN 4 coordination at an atomic level in the catalysts. Through investigating effects of Co doping contents and thermal activation temperature, an atomically Co site dispersed catalyst with optimal chemical and structural properties has achieved respectable activity and stability for the oxygen reduction reaction (ORR) in challenging acidic media (e.g., half-wave potential of 0.80 V vs reversible hydrogen electrode (RHE). The performance is comparable to Fe-based catalysts and 60 mV lower than Pt/C -60 μg Pt cm -2 ). Fuel cell tests confirm that catalyst activity and stability can translate to high-performance cathodes in PEMFCs. The remarkably enhanced ORR performance is attributed to the presence of well-dispersed CoN 4 active sites embedded in 3D porous MOF-derived carbon particles, omitting any inactive Co aggregates. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. C-C Coupling on Single-Atom-Based Heterogeneous Catalyst.

    Science.gov (United States)

    Zhang, Xiaoyan; Sun, Zaicheng; Wang, Bin; Tang, Yu; Nguyen, Luan; Li, Yuting; Tao, Franklin Feng

    2018-01-24

    Compared to homogeneous catalysis, heterogeneous catalysis allows for ready separation of products from the catalyst and thus reuse of the catalyst. C-C coupling is typically performed on a molecular catalyst which is mixed with reactants in liquid phase during catalysis. This homogeneous mixing at a molecular level in the same phase makes separation of the molecular catalyst extremely challenging and costly. Here we demonstrated that a TiO 2 -based nanoparticle catalyst anchoring singly dispersed Pd atoms (Pd 1 /TiO 2 ) is selective and highly active for more than 10 Sonogashira C-C coupling reactions (R≡CH + R'X → R≡R'; X = Br, I; R' = aryl or vinyl). The coupling between iodobenzene and phenylacetylene on Pd 1 /TiO 2 exhibits a turnover rate of 51.0 diphenylacetylene molecules per anchored Pd atom per minute at 60 °C, with a low apparent activation barrier of 28.9 kJ/mol and no cost of catalyst separation. DFT calculations suggest that the single Pd atom bonded to surface lattice oxygen atoms of TiO 2 acts as a site to dissociatively chemisorb iodobenzene to generate an intermediate phenyl, which then couples with phenylacetylenyl bound to a surface oxygen atom. This coupling of phenyl adsorbed on Pd 1 and phenylacetylenyl bound to O ad of TiO 2 forms the product molecule, diphenylacetylene.

  13. Laproendoscopic single site oesophageal diverticulectomy

    Directory of Open Access Journals (Sweden)

    Chinnusamy Palanivelu

    2013-01-01

    Full Text Available Epiphrenic divericula are uncommon disorders of the lower oesophagus, which are symptomatic in only 15-20% of cases. The optimum treatment modality for such cases remains an oesophageal diverticulectomy with long myotomy with or without an antireflux operation. Recently, this is increasingly being done through the laparoscopic approach. Here we describe the first reported case of oesophageal diverticulectomy through the laparoendoscopic single site approach. A 57-year-old man presented to us with 6 months history of dysphagia and regurgitation. Patient was investigated with upper gastrointestinal (UGI endoscopy, barium swallow, CECT chest and abdomen, oesophageal manometry and 24 hour pH study. He was diagnosed to have lower oesophageal diverticulum with mildly elevated pressure readings in manometric studies with normal peristalsis. Based on his symptoms, he was taken up for surgery. A laparoscopic transhiatal oesophageal diverticulectomy with myotomy was done through laparoendoscopic single site technique. The procedure lasted 160 min. There was no intraoperative complication. Gastrograffin study was done on postoperative day 2 following which he was started on liquids. He made an uneventful recovery and was discharged on fourth day. He remained asymptomatic on follow up. Oesophageal diverticulectomy is possible through laparoendoscopic single site approach if necessary expertise is available.

  14. Broadening of molecular weight distribution of polymers synthesized by metallocene-based dual-site catalysts

    International Nuclear Information System (INIS)

    Santos, Joao H.Z. dos; Fisch, Adriano G.; Cardozo, Nilo S.M.; Secchi, Argimiro R.

    2008-01-01

    The main topics related to the use of dual-site catalysts in the production of polymers with broad molecular weight distribution are reviewed. The polymerization using dual-site catalysts is more economical and allows to produce a higher quality product than other processes, such as polymer blend and multistage reactors. However, the formulation of these catalysts is quite complicated since the same catalyst must produce distinct polymer grades. In addition, the release of patents concerning the combination of metallocenes and new technologies for polymerization shows that polymerization processes using dual-site catalysts are of current industrial interest. (author)

  15. Tackling CO Poisoning with Single Atom Alloy Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jilei; Lucci, Felicia R.; Yang, Ming; Lee, Sungsik; Marcinkowski, Matthew D.; Therrien, Andrew J.; Williams, Christopher T.; Sykes, E. Charles H.; Flytzani-Stephanopoulos, Maria

    2016-05-01

    Platinum (Pt) catalysts are extensively used in the chemical industry and as electrocatalysts in fuel cells. Pt is notorious for its sensitivity to poisoning by strong CO adsorption. Here we demonstrate that the single atom alloy (SAA) strat-egy applied to Pt reduces the binding strength of CO while maintaining catalytic performance. By using surface sensi-tive studies, we accurately determined the binding strength of CO to different Pt ensembles, and this in turn guided the preparation of PtCu alloy nanoparticles. The atomic ratio Pt:Cu = 1:120 yielded a SAA which exhibited excellent CO tolerance in H2 activation, the key elementary step for hy-drogenation and hydrogen electro-oxidation. As a probe reaction, the selective hydrogenation of acetylene to ethene was performed under flow conditions on the SAA nanopar-ticles supported on alumina without activity loss in the pres-ence of CO. The ability to maintain reactivity in the presence of CO is vital to other industrial reactions including fuel reforming and methanol/ethanol fuel cells.

  16. Robotic single-site pelvic lymphadenectomy.

    Science.gov (United States)

    Tateo, Saverio; Nozza, Arrigo; Del Pezzo, Chiara; Mereu, Liliana

    2014-09-01

    To examine the feasibility of performing pelvic lymphadenectomy with robotic single site approach. Recent papers described the feasibility of robotic-single site hysterectomy [1-3] for benign and malign pathologies but only with the development of new single site 5mm instruments as the bipolar forceps, robotic single site platform can be safely utilized also for lymphadenectomy. A 65 year-old, multiparous patient with a body mass index of 22.5 and diagnosed with well differentiated adenocarcinoma of the endometrium underwent a robotic single-site peritoneal washing, total hysterectomy, bilateral adnexectomy and pelvic lymphadenectomy. The procedure was performed using the da Vinci Si Surgical System (Intuitive Surgical, Sunnyvale, CA) through a single 2,5 cm umbilical incision, with a multi-channel system and two single site robotic 5mm instruments. A 3-dimensional, HD 8.5mm endoscope and a 5mm accessory instrument were also utilized. Type I lymphonodes dissection for external iliac and obturator regions was performed [4]. Total operative time was 210 min; incision, trocar placement and docking time occurring in 12 min. Total console time was 183 min, estimated blood loss was 50 ml, no intra-operative or post-operative complications occurred. Hospital discharge occurred on post operative day 2 and total number of lymphnodes removed was 33. Difficulties in term of instrument's clashing and awkward motions have been encountered. Robotic single-site pelvic lymphadenectomy using bipolar forceps and monopolar hook is feasible. New developments are needed to improve surgical ergonomics and additional studies should be performed to explore possible benefits of this procedure. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Staining of fluid-catalytic cracking catalysts: Localising Brønsted acidity within a single catalyst particle

    NARCIS (Netherlands)

    Buurmans, I.L.C.|info:eu-repo/dai/nl/31406592X; Ruiz Martinez, J.|info:eu-repo/dai/nl/341386405; van Leeuwen, S.L.; van der Beek, D.; Bergwerff, J.A.; Knowles, W.V.; Vogt, Eelco|info:eu-repo/dai/nl/073717398; Weckhuysen, B.M.|info:eu-repo/dai/nl/285484397

    2012-01-01

    A time-resolved in situ micro-spectroscopic approach has been used to investigate the Brønsted acidic properties of fluid-catalytic-cracking (FCC) catalysts at the single particle level by applying the acid-catalysed styrene oligomerisation probe reaction. The reactivity of individual FCC components

  18. Single site porphyrine-like structures advantages over metals for selective electrochemical CO2 reduction

    DEFF Research Database (Denmark)

    Bagger, Alexander; Ju, Wen; Varela, Ana Sofia

    2017-01-01

    the competing Hydrogen Evolution Reaction (HER). The single metal site in a porphyrine-like structure requires an ontop site binding of hydrogen, compared to the hollow site binding of hydrogen on a metal catalyst surface. The difference in binding site structure gives a fundamental energy-shift in the scaling......Currently, no catalysts are completely selective for the electrochemical CO2 Reduction Reaction (CO2RR). Based on trends in density functional theory calculations of reaction intermediates we find that the single metal site in a porphyrine-like structure has a simple advantage of limiting...

  19. A high performance catalyst for methane conversion to methanol: graphene supported single atom Co.

    Science.gov (United States)

    Yuan, Jinyun; Zhang, Wenhua; Li, Xingxing; Yang, Jinlong

    2018-02-27

    Employing first principles calculations, we show a two-step reaction mechanism for direct methane oxidation to methanol over a single atom Co-embedded graphene (Gr) catalyst, with N 2 O as the O-donor molecule. C-H activation is the rate-limiting step. The high reaction activity and selectivity under mild conditions were predicted for this catalyst.

  20. Stable single-unit-cell nanosheets of zeolite MFI as active and long-lived catalysts.

    Science.gov (United States)

    Choi, Minkee; Na, Kyungsu; Kim, Jeongnam; Sakamoto, Yasuhiro; Terasaki, Osamu; Ryoo, Ryong

    2009-09-10

    Zeolites-microporous crystalline aluminosilicates-are widely used in petrochemistry and fine-chemical synthesis because strong acid sites within their uniform micropores enable size- and shape-selective catalysis. But the very presence of the micropores, with aperture diameters below 1 nm, often goes hand-in-hand with diffusion limitations that adversely affect catalytic activity. The problem can be overcome by reducing the thickness of the zeolite crystals, which reduces diffusion path lengths and thus improves molecular diffusion. This has been realized by synthesizing zeolite nanocrystals, by exfoliating layered zeolites, and by introducing mesopores in the microporous material through templating strategies or demetallation processes. But except for the exfoliation, none of these strategies has produced 'ultrathin' zeolites with thicknesses below 5 nm. Here we show that appropriately designed bifunctional surfactants can direct the formation of zeolite structures on the mesoporous and microporous length scales simultaneously and thus yield MFI (ZSM-5, one of the most important catalysts in the petrochemical industry) zeolite nanosheets that are only 2 nm thick, which corresponds to the b-axis dimension of a single MFI unit cell. The large number of acid sites on the external surface of these zeolites renders them highly active for the catalytic conversion of large organic molecules, and the reduced crystal thickness facilitates diffusion and thereby dramatically suppresses catalyst deactivation through coke deposition during methanol-to-gasoline conversion. We expect that our synthesis approach could be applied to other zeolites to improve their performance in a range of important catalytic applications.

  1. Structure of the catalytic sites in Fe/N/C-catalysts for O2-reduction in PEM fuel cells

    Science.gov (United States)

    Kramm, Ulrike I.; Herranz, Juan; Larouche, Nicholas; Arruda, Thomas M.; Lefèvre, Michel; Jaouen, Frédéric; Bogdanoff, Peter; Fiechter, Sebastian; Abs-Wurmbach, Irmgard; Mukerjee, Sanjeev; Dodelet, Jean-Pol

    2012-01-01

    Fe-based catalytic sites for the reduction of oxygen in acidic medium have been identified by 57Fe Mössbauer spectroscopy of Fe/N/C catalysts containing 0.03 to 1.55 wt% Fe, which were prepared by impregnation of iron acetate on carbon black followed by heat-treatment in NH3 at 950°C. Four different Fe-species were detected at all iron concentrations: three doublets assigned to molecular FeN4-like sites with their ferrous ion in low (D1), medium (D2) or high spin state (D3), and two other doublets assigned to a single Fe-species (D4 and D5) consisting of surface oxidized nitride nanoparticles (FexN, with x≤2.1). A fifth Fe-species appears only in those catalysts with Fe-contents ≥ 0.27 wt%. It is characterized by a very broad singlet, which has been assigned to incomplete FeN4-like sites that quickly dissolve in contact with an acid. Among the five Fe-species identified in these catalysts, only D1 and D3 display catalytic activity for the oxygen reduction reaction (ORR) in the acid medium, with D3 featuring a composite structure with a protonated neighbour basic nitrogen and being by far the most active species, with an estimated turn over frequency for the ORR of 11.4 e− site−1 s−1 at 0.8V vs RHE. Moreover, all D1 sites and between 1/2 to 2/3 of the D3 sites are acid-resistant. A scheme for the mechanism of site formation upon heat-treatment is also proposed. This identification of the ORR-active sites in these catalysts is of crucial importance to design strategies to improve the catalytic activity and stability of these materials. PMID:22824866

  2. Catalyst-Controlled Site-Selectivity Switching in Pd-Catalyzed Cross-Coupling of Dihaloarenes

    Directory of Open Access Journals (Sweden)

    Kei Manabe

    2014-08-01

    Full Text Available Pd-catalyzed, site-selective mono-cross-coupling of substrates with two identical halo groups is a useful method for synthesizing substituted monohalogenated arenes. Such arenes constitute an important class of compounds, which are commonly identified as drug components and synthetic intermediates. Traditionally, these site-selective reactions have been realized in a “substrate-controlled” manner, which is based on the steric and electronic differences between the two carbon-halogen bonds of the substrate. Recently, an alternative strategy, “catalyst-controlled” site-selective cross-coupling, has emerged. In this strategy, the preferred reaction site of a dihaloarene can be switched, merely by changing the catalyst used. This type of selective reaction further expands the utility of Pd-catalyzed cross-coupling. In this review, we summarize the reported examples of catalyst-controlled site-selectivity switching in Pd-catalyzed cross-coupling of dihaloarenes.

  3. Quantifying the density and utilization of active sites in non-precious metal oxygen electroreduction catalysts

    Science.gov (United States)

    Sahraie, Nastaran Ranjbar; Kramm, Ulrike I.; Steinberg, Julian; Zhang, Yuanjian; Thomas, Arne; Reier, Tobias; Paraknowitsch, Jens-Peter; Strasser, Peter

    2015-01-01

    Carbon materials doped with transition metal and nitrogen are highly active, non-precious metal catalysts for the electrochemical conversion of molecular oxygen in fuel cells, metal air batteries, and electrolytic processes. However, accurate measurement of their intrinsic turn-over frequency and active-site density based on metal centres in bulk and surface has remained difficult to date, which has hampered a more rational catalyst design. Here we report a successful quantification of bulk and surface-based active-site density and associated turn-over frequency values of mono- and bimetallic Fe/N-doped carbons using a combination of chemisorption, desorption and 57Fe Mössbauer spectroscopy techniques. Our general approach yields an experimental descriptor for the intrinsic activity and the active-site utilization, aiding in the catalyst development process and enabling a previously unachieved level of understanding of reactivity trends owing to a deconvolution of site density and intrinsic activity. PMID:26486465

  4. Single Cobalt Atoms with Precise N-Coordination as Superior Oxygen Reduction Reaction Catalysts.

    Science.gov (United States)

    Yin, Peiqun; Yao, Tao; Wu, Yuen; Zheng, Lirong; Lin, Yue; Liu, Wei; Ju, Huanxin; Zhu, Junfa; Hong, Xun; Deng, Zhaoxiang; Zhou, Gang; Wei, Shiqiang; Li, Yadong

    2016-08-26

    A new strategy for achieving stable Co single atoms (SAs) on nitrogen-doped porous carbon with high metal loading over 4 wt % is reported. The strategy is based on a pyrolysis process of predesigned bimetallic Zn/Co metal-organic frameworks, during which Co can be reduced by carbonization of the organic linker and Zn is selectively evaporated away at high temperatures above 800 °C. The spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurements both confirm the atomic dispersion of Co atoms stabilized by as-generated N-doped porous carbon. Surprisingly, the obtained Co-Nx single sites exhibit superior ORR performance with a half-wave potential (0.881 V) that is more positive than commercial Pt/C (0.811 V) and most reported non-precious metal catalysts. Durability tests revealed that the Co single atoms exhibit outstanding chemical stability during electrocatalysis and thermal stability that resists sintering at 900 °C. Our findings open up a new routine for general and practical synthesis of a variety of materials bearing single atoms, which could facilitate new discoveries at the atomic scale in condensed materials. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Mesoporous zeolite single crystal catalysts: Diffusion and catalysis in hierarchical zeolites

    DEFF Research Database (Denmark)

    Christensen, Christina Hviid; Johannsen, Kim; Toernqvist, Eric

    2007-01-01

    in the zeolite micropores. Here, we briefly discuss the most important ways of introducing mesopores into zeolites and, for the first time, we show experimentally that the presence of mesopores dramatically increases the rate of diffusion in zeolite catalysts. This is done by studying the elution of iso-butane...... from packed beds of conventional and mesoporous zeolite catalysts. Moreover, we discuss in detail the recent observation of improved activity and selectivity in the alkylation of benzene with ethene using mesoporous zeolite single crystal catalysts. For this reaction, we show by calculation...

  6. CO oxidation studies over supported noble metal catalysts and single crystals: A review

    Science.gov (United States)

    Boecker, Dirk; Gonzalez, Richard D.

    1987-01-01

    The catalytic oxidation of CO over noble metal catalysts is reviewed. Results obtained on supported noble metal catalysts and single crystals both at high pressures and under UHV conditions are compared. The underlying causes which result in surface instabilities and multiple steady-state oscillations are considered, in particular, the occurrence of hot spots. CO islands of reactivity, surface oxide formation and phase transformations under oscillatory conditions are discussed.

  7. From 3D to 2D Co and Ni Oxyhydroxide Catalysts: Elucidation of the Active Site and Influence of Doping on the Oxygen Evolution Activity

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Hansen, Heine Anton; Vegge, Tejs

    2017-01-01

    Layered oxyhydroxides (ox-hys) of Ni and Co are among the most active catalysts for oxygen evolution in alkaline media. Their activities can be further tuned by delamination into single-layer oxide sheets or by means of doping. The active site for the reaction and how doping and delamination...... investigate the role of terrace and edge sites and use stability, catalytic activity, and electronic conductivity as evaluation criteria to pinpoint the best catalysts. We arrive at several important conclusions: the ox-hy surface is fully oxidized under oxygen evolution conditions, bulk terraces...

  8. Single-atom catalysts for CO2electroreduction with significant activity and selectivity improvements.

    Science.gov (United States)

    Back, Seoin; Lim, Juhyung; Kim, Na-Young; Kim, Yong-Hyun; Jung, Yousung

    2017-02-01

    A single-atom catalyst (SAC) has an electronic structure that is very different from its bulk counterparts, and has shown an unexpectedly high specific activity with a significant reduction in noble metal usage for CO oxidation, fuel cell and hydrogen evolution applications, although physical origins of such performance enhancements are still poorly understood. Herein, by means of density functional theory (DFT) calculations, we for the first time investigate the great potential of single atom catalysts for CO 2 electroreduction applications. In particular, we study a single transition metal atom anchored on defective graphene with single or double vacancies, denoted M@sv-Gr or M@dv-Gr, where M = Ag, Au, Co, Cu, Fe, Ir, Ni, Os, Pd, Pt, Rh or Ru, as a CO 2 reduction catalyst. Many SACs are indeed shown to be highly selective for the CO 2 reduction reaction over a competitive H 2 evolution reaction due to favorable adsorption of carboxyl (*COOH) or formate (*OCHO) over hydrogen (*H) on the catalysts. On the basis of free energy profiles, we identified several promising candidate materials for different products; Ni@dv-Gr (limiting potential U L = -0.41 V) and Pt@dv-Gr (-0.27 V) for CH 3 OH production, and Os@dv-Gr (-0.52 V) and Ru@dv-Gr (-0.52 V) for CH 4 production. In particular, the Pt@dv-Gr catalyst shows remarkable reduction in the limiting potential for CH 3 OH production compared to any existing catalysts, synthesized or predicted. To understand the origin of the activity enhancement of SACs, we find that the lack of an atomic ensemble for adsorbate binding and the unique electronic structure of the single atom catalysts as well as orbital interaction play an important role, contributing to binding energies of SACs that deviate considerably from the conventional scaling relation of bulk transition metals.

  9. Nanosheet Supported Single-Metal Atom Bifunctional Catalyst for Overall Water Splitting.

    Science.gov (United States)

    Ling, Chongyi; Shi, Li; Ouyang, Yixin; Zeng, Xiao Cheng; Wang, Jinlan

    2017-08-09

    Nanosheet supported single-atom catalysts (SACs) can make full use of metal atoms and yet entail high selectivity and activity, and bifunctional catalysts can enable higher performance while lowering the cost than two separate unifunctional catalysts. Supported single-atom bifunctional catalysts are therefore of great economic interest and scientific importance. Here, on the basis of first-principles computations, we report a design of the first single-atom bifunctional eletrocatalyst, namely, isolated nickel atom supported on β 12 boron monolayer (Ni 1 /β 12 -BM), to achieve overall water splitting. This nanosheet supported SAC exhibits remarkable electrocatalytic performance with the computed overpotential for oxygen/hydrogen evolution reaction being just 0.40/0.06 V. The ab initio molecular dynamics simulation shows that the SAC can survive up to 800 K elevated temperature, while enacting a high energy barrier of 1.68 eV to prevent isolated Ni atoms from clustering. A viable experimental route for the synthesis of Ni 1 /β 12 -BM SAC is demonstrated from computer simulation. The desired nanosheet supported single-atom bifunctional catalysts not only show great potential for achieving overall water splitting but also offer cost-effective opportunities for advancing clean energy technology.

  10. Rational Catalyst Design of Titanium-Silica Materials Aided by Site-Specific Titration Tools

    Science.gov (United States)

    Eaton, Todd Robert

    Silica-supported titanium materials are widely used for thermocatalytic applications such as hydroxylation of alkanes and aromatics, oxidation of alcohols and ethers, ammoximation of carbonyls, and sulfoxidations, while Ti-based materials are widely studied for photocatalytic applications such as photo-oxidation of organic substrates and photo-reduction of CO 2. However, the underlying phenomena of how to synthesize, identify, and control the active structures in these materials is not well understood because of the narrow scope of previous work. Studies of titanium-based catalysts typically focus on materials where the metal is present as either highly-dispersed Ti cations or in bulk crystalline TiO2 form, neglecting the numerous and potentially useful intermediate structures. Furthermore, these works typically focus on a single synthesis technique and rely upon bulk characterization techniques to understand the materials. Here rigorous titanium-silica synthesis-structure-function relationships are established by examining several different synthetic method and utilizing characterization techniques that enable an atomic-level understanding of the materials. The materials studied span the range from isolated Ti cations to clustered TiOx domains, polymeric TiO x domains, anatase-like 2D TiO2 domains, and 3D crystalline TiO2. Tools to quantify accessible TiO x and tetrahedral Ti sites are developed, utilizing the selective titration of titanium with phenylphosphonic acid (PPA). Catalytic properties are probed with the photocatalytic oxidation of benzyl alcohol and the thermocatalytic epoxidation of cis-cyclooctene with H2O2 . PPA titration data indicate that the rate of benzyl alcohol photo-oxidation is independent of titanium coordination, while the rate of alkene epoxidation with H2O2 is proportional to the number of tetrahedral titanium sites on the catalyst. PPA titration data also enables the estimation of TiO2 particle size and reveals an important distinction

  11. Single-Atom Pt as Co-Catalyst for Enhanced Photocatalytic H2 Evolution.

    Science.gov (United States)

    Li, Xiaogang; Bi, Wentuan; Zhang, Lei; Tao, Shi; Chu, Wangsheng; Zhang, Qun; Luo, Yi; Wu, Changzheng; Xie, Yi

    2016-03-23

    Isolated single-atom platinum (Pt) embedded in the sub-nanoporosity of 2D g-C3 N4 as a new form of co-catalyst is reported. The highly stable single-atom co-catalyst maximizes the atom efficiency and alters the surface trap states of g-C3 N4 , leading to significantly enhanced photocatalytic H2 evolution activity, 8.6 times higher than that of Pt nanoparticles and up to 50 times that for bare g-C3 N4 . © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Integrated Transmission Electron and Single-Molecule Fluorescence Microscopy Correlates Reactivity with Ultrastructure in a Single Catalyst Particle

    OpenAIRE

    Hendriks, Frank C.; Mohammadian, Sajjad; Ristanovic, Zoran; Kalirai, Samanbir; Meirer, Florian; Vogt, Eelco T. C.; Bruijnincx, Pieter C. A.; Gerritsen, Hans; Weckhuysen, Bert M.

    2018-01-01

    Establishing structure–activity relationships in complex, hierarchically structured nanomaterials, such as fluid catalytic cracking (FCC) catalysts, requires characterization with complementary, correlated analysis techniques. An integrated setup has been developed to perform transmission electron microscopy (TEM) and single-molecule fluorescence (SMF) microscopy on such nanostructured samples. Correlated structure–reactivity information was obtained for 100 nm thin, microtomed sections of a ...

  13. The behaviour of a single catalyst pellet for the selective hydrogenation of ethyne in ethene

    NARCIS (Netherlands)

    Bos, A.N.R.; Bos, A.N.R.; Hof, E.; Kuper, W.; Westerterp, K.R.

    1993-01-01

    The steady-state and dynamic behaviour of a single Pd---Al2O3 catalyst particle is studied for the selective hydrogenation of ethyne in the presence of ethene, without addition of carbon monoxide. The particle-to-gas heat transfer in the reactor is characterized. During selective hydrogenation, not

  14. Highly dispersed metal catalyst

    Science.gov (United States)

    Xiao, Xin; West, William L.; Rhodes, William D.

    2016-11-08

    A supported catalyst having an atomic level single atom structure is provided such that substantially all the catalyst is available for catalytic function. A process of forming a single atom catalyst unto a porous catalyst support is also provided.

  15. Single Atomic Iron Catalysts for Oxygen Reduction in Acidic Media: Particle Size Control and Thermal Activation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hanguang [Department; Hwang, Sooyeon [Center; Wang, Maoyu [School; Feng, Zhenxing [School; Karakalos, Stavros [Department; Luo, Langli [Pacific Northwest National Laboratory, Richland, Washington 99352, United States; Qiao, Zhi [Department; Xie, Xiaohong [Pacific Northwest National Laboratory, Richland, Washington 99352, United States; Wang, Chongmin [Pacific Northwest National Laboratory, Richland, Washington 99352, United States; Su, Dong [Center; Shao, Yuyan [Pacific Northwest National Laboratory, Richland, Washington 99352, United States; Wu, Gang [Department

    2017-09-26

    To significantly reduce the cost of proton exchange membrane (PEM) fuel cells, current Pt must be replaced by platinum-metal-group (PGM)-free catalysts for the oxygen reduction reaction (ORR) in acid. We report here a new class of high-performance atomic iron dispersed carbon catalysts through controlled chemical doping of iron ions into zinc-zeolitic imidazolate framework (ZIF), a type of metal-organic framework (MOF). The novel synthetic chemistry enables accurate size control of Fe-doped ZIF catalyst particles with a wide range from 20 to 1000 nm without changing chemical properties, which provides a great opportunity to increase the density of active sites that is determined by the particle size. We elucidated the active site formation mechanism by correlating the chemical and structural changes with thermal activation process for the conversion from Fe-N4 complex containing hydrocarbon networks in ZIF to highly active FeNx sites embedded into carbon. A temperature of 800oC was identified as the critical point to start forming pyridinic nitrogen doping at the edge of the graphitized carbon planes. Further increasing heating temperature to 1100oC leads to increase of graphitic nitrogen, generating possible synergistic effect with FeNx sites to promote ORR activity. The best performing catalyst, which has well-defined particle size around 50 nm and abundance of atomic FeNx sites embedded into carbon structures, achieve a new performance milestone for the ORR in acid including a half-wave potential of 0.85 V vs RHE and only 20 mV loss after 10,000 cycles in O2 saturated H2SO4 electrolyte. The new class PGM-free catalyst with approaching activity to Pt holds great promise for future PEM fuel cells.

  16. Water Adsorption and Dissociation on Ceria-Supported Single-Atom Catalysts: A First-Principles DFT+U Investigation.

    Science.gov (United States)

    Han, Zhong-Kang; Gao, Yi

    2016-02-01

    Single-atom catalysts have attracted wide attention owing to their extremely high atom efficiency and activities. In this paper, we applied density functional theory with the inclusion of the on-site Coulomb interaction (DFT+U) to investigate water adsorption and dissociation on clean CeO 2 (111) surfaces and single transition metal atoms (STMAs) adsorbed on the CeO 2 (111) surface. It is found that the most stable water configuration is molecular adsorption on the clean CeO 2 (111) surface and dissociative adsorption on STMA/CeO 2 (111) surfaces, respectively. In addition, our results indicate that the more the electrons that transfer from STMA to the ceria substrate, the stronger the binding energies between the STMA and ceria surfaces. A linear relationship is identified between the water dissociation barriers and the d band centers of STMA, known as the generalized Brønsted-Evans-Polanyi principle. By combining the oxygen spillovers, single-atom dispersion stabilities, and water dissociation barriers, Zn, Cr, and V are identified as potential candidates for the future design of ceria-supported single-atom catalysts for reactions in which the dissociation of water plays an important role, such as the water-gas shift reaction. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Single Atomic Iron Catalysts for Oxygen Reduction in Acidic Media: Particle Size Control and Thermal Activation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hanguang; Hwang, Sooyeon; Wang, Maoyu; Feng, Zhenxing; Karakalos, Stavros; Luo, Langli; Qiao, Zhi; Xie, Xiaohong; Wang, Chongmin; Su, Dong; Shao, Yuyan; Wu, Gang (BNL); (Oregon State U.); (SC); (PNNL); (Buffalo)

    2017-09-26

    It remains a grand challenge to replace platinum group metal (PGM) catalysts with earth-abundant materials for the oxygen reduction reaction (ORR) in acidic media, which is crucial for large-scale deployment of proton exchange membrane fuel cells (PEMFCs). Here, we report a high-performance atomic Fe catalyst derived from chemically Fe-doped zeolitic imidazolate frameworks (ZIFs) by directly bonding Fe ions to imidazolate ligands within 3D frameworks. Although the ZIF was identified as a promising precursor, the new synthetic chemistry enables the creation of well-dispersed atomic Fe sites embedded into porous carbon without the formation of aggregates. The size of catalyst particles is tunable through synthesizing Fe-doped ZIF nanocrystal precursors in a wide range from 20 to 1000 nm followed by one-step thermal activation. Similar to Pt nanoparticles, the unique size control without altering chemical properties afforded by this approach is able to increase the number of PGM-free active sites. The best ORR activity is measured with the catalyst at a size of 50 nm. Further size reduction to 20 nm leads to significant particle agglomeration, thus decreasing the activity. Using the homogeneous atomic Fe model catalysts, we elucidated the active site formation process through correlating measured ORR activity with the change of chemical bonds in precursors during thermal activation up to 1100 °C. The critical temperature to form active sites is 800 °C, which is associated with a new Fe species with a reduced oxidation number (from Fe3+ to Fe2+) likely bonded with pyridinic N (FeN4) embedded into the carbon planes. Further increasing the temperature leads to continuously enhanced activity, linked to the rise of graphitic N and Fe–N species. The new atomic Fe catalyst has achieved respectable ORR activity in challenging acidic media (0.5 M H2SO4), showing a half-wave potential of 0.85 V vs RHE and leaving only a 30 mV gap with Pt/C (60 μgPt/cm2). Enhanced stability

  18. Hierarchical zeolites: progress on synthesis and characterization of mesoporous zeolite single crystal catalysts

    DEFF Research Database (Denmark)

    Kustova, Marina; Egeblad, Kresten; Christensen, Claus H.

    2007-01-01

    in a hierarchical pore size distribution. In this work, the preparation of mesoporous ZSM-12 single crystal catalysts using a new improved procedure for directly introducing carbon in the reaction mixture is reported. The microwave heating technique is also applied for the synthesis of mesoporous silicalite-1...... measurements. Additionally, the results of diffusion of n-hexadecane in conventional and mesoporous zeolites are presented. Isomerization and cracking of n-hexadecane was chosen as model test reaction for these materials. All results support that mesoporous zeolites are superior catalysts due to improved mass...

  19. Selective alkane activation with single-site atoms on amorphous support

    Science.gov (United States)

    Hock, Adam S.; Schweitzer, Neil M.; Miller, Jeffrey T.; Hu, Bo

    2015-11-24

    The present invention relates generally to catalysts and methods for use in olefin production. More particularly, the present invention relates to novel amorphously supported single-center, Lewis acid metal ions and use of the same as catalysts.

  20. Formic acid decomposition on Pt1/Cu (111) single platinum atom catalyst: Insights from DFT calculations and energetic span model analysis

    Science.gov (United States)

    Wang, Ying-Fan; Li, Kun; Wang, Gui-Chang

    2018-04-01

    Inspired by the recent surface experimental results that the monatomic Pt catalysts has more excellent hydrogen production that Cu(111) surface, the mechanism of decomposition of formic acid on Cu(111) and single atom Pt1/Cu(111) surface was studied by periodic density functional theory calculations in the present work. The results show that the formic acid tends to undergo dehydrogenation on both surfaces to obtain the hydrogen product of the target product, and the selectivity and catalytic activity of Pt1/Cu (111) surface for formic acid dehydrogenation are better. The reason is that the single atom Pt1/Cu(111) catalyst reduces the reaction energy barrier (i.e., HCOO → CO2 + H) of the critical step of the dehydrogenation reaction due to the fact that the single atom Pt1/Cu(111) catalyst binds formate weakly compared to that of Cu (111) one. Moreover, it was found that the Pt1/Cu (111) binds CO more strongly than that of Cu (111) one and thus leading to the difficult for the formation of CO. These two factors would make the single Pt atom catalyst had the high selectivity for the H2 production. It is hoped that the present work may help people to design the efficient H2 production from HCOOH decomposition by reduce the surface binding strength of HCOO species, for example, using the low coordination number active site like single atom or other related catalytic system.

  1. Theoretical study of catalytic mechanism for single-site water oxidation process.

    Science.gov (United States)

    Lin, Xiangsong; Hu, Xiangqian; Concepcion, Javier J; Chen, Zuofeng; Liu, Shubin; Meyer, Thomas J; Yang, Weitao

    2012-09-25

    Water oxidation is a linchpin in solar fuels formation, and catalysis by single-site ruthenium complexes has generated significant interest in this area. Combining several theoretical tools, we have studied the entire catalytic cycle of water oxidation for a single-site catalyst starting with [Ru(II)(tpy)(bpm)(OH(2))](2+) (i.e., [Ru(II)-OH(2)](2+); tpy is 2,2':6',2''-terpyridine and bpm is 2,2'-bypyrimidine) as a representative example of a new class of single-site catalysts. The redox potentials and pK(a) calculations for the first two proton-coupled electron transfers (PCETs) from [Ru(II)-OH(2)](2+) to [Ru(IV) = O](2+) and the following electron-transfer process to [Ru(V) = O](3+) suggest that these processes can proceed readily in acidic or weakly basic conditions. The subsequent water splitting process involves two water molecules, [Ru(V) = O](3+) to generate [Ru(III)-OOH](2+), and H(3)O(+) with a low activation barrier (~10 kcal/mol). After the key O-O bond forming step in the single-site Ru catalysis, another PECT process oxidizes [Ru(III)-OOH](2+) to [Ru(IV)-OO](2+) when the pH is lower than 3.7. Two possible forms of [Ru(IV)-OO](2+), open and closed, can exist and interconvert with a low activation barrier (catalytic cycle. This understanding is helpful in the design of new catalysts for water oxidation.

  2. Support effects on adsorption and catalytic activation of O2 in single atom iron catalysts with graphene-based substrates.

    Science.gov (United States)

    Gao, Zheng-Yang; Yang, Wei-Jie; Ding, Xun-Lei; Lv, Gang; Yan, Wei-Ping

    2018-03-07

    The adsorption and catalytic activation of O 2 on single atom iron catalysts with graphene-based substrates were investigated systematically by density functional theory calculation. It is found that the support effects of graphene-based substrates have a significant influence on the stability of the single atom catalysts, the adsorption configuration, the electron transfer mechanism, the adsorption energy and the energy barrier. The differences in the stable adsorption configuration of O 2 on single atom iron catalysts with different graphene-based substrates can be well understood by the symmetrical matching principle based on frontier molecular orbital analysis. There are two different mechanisms of electron transfer, in which the Fe atom acts as the electron donor in single vacancy graphene-based substrates while the Fe atom mainly acts as the bridge for electron transfer in double vacancy graphene-based substrates. The Fermi softness and work function are good descriptors of the adsorption energy and they can well reveal the relationship between electronic structure and adsorption energy. This single atom iron catalyst with single vacancy graphene modified by three nitrogen atoms is a promising non-noble metal single atom catalyst in the adsorption and catalytic oxidation of O 2 . Furthermore, the findings can lay the foundation for the further study of graphene-based support effects and provide a guideline for the development and design of new non-noble-metal single atom catalysts.

  3. Active catalytic sites in the ammoxidation of propane and propene over V-Sb-O catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, S.A.; Zanthoff, H.W. [Bochum Univ. (Germany). Lehrstuhl fuer Technische Chemie

    1998-12-31

    The ammoxidation of propane over VSb{sub y}O{sub x} catalysts (y=1, 2, 5) was investigated with respect to the role of different oxygen species in the selective and non selective reaction steps using transient experiments in the Temporal Analysis of Products (TAP) reactor. Only lattice oxygen is involved in the oxidation reactions. Using isotopic labelled oxygen it is shown that two different active sites exist on the surface. On site A, which can be reoxidized faster by gas phase oxygen compared to site B, mainly CO is formed. On site B CO{sub 2} and acrolein as well as NO and N{sub 2}O in the presence of ammonia in the feed gas are formed and reoxidation mainly occurs with bulk lattice oxygen. (orig.)

  4. In situ Raman studies of single-walled carbon nanotubes grown by local catalyst heating

    Science.gov (United States)

    Dittmer, S.; Olofsson, N.; Ek Weis, J.; Nerushev, O. A.; Gromov, A. V.; Campbell, E. E. B.

    2008-05-01

    Using in situ Raman spectroscopy we investigate single wall carbon nanotube growth on Mo electrodes, using a highly localized resistive heating technique. Small diameter semiconducting single wall nanotubes grow very rapidly when the catalyst support is heated to a temperature of 800 °C. The G/D ratio shows an interesting time-dependent behaviour. It first decreases, indicating the presence of amorphous carbon and then significantly increases again after ca. 5 min growth while retaining the position and shape expected for predominantly semiconducting carbon nanotubes.

  5. Hierarchical zeolites: progress on synthesis and characterization of mesoporous zeolite single crystal catalysts

    DEFF Research Database (Denmark)

    Kustova, Marina; Egeblad, Kresten; Christensen, Claus H.

    2007-01-01

    in a hierarchical pore size distribution. In this work, the preparation of mesoporous ZSM-12 single crystal catalysts using a new improved procedure for directly introducing carbon in the reaction mixture is reported. The microwave heating technique is also applied for the synthesis of mesoporous silicalite-1...... single crystals using this direct introduction of carbon into the reaction mixture. All samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), temperature-programmed desorption of ammonia (NH3-TPD), and N-2 adsorption...

  6. Strategies for Probing Nanometer-Scale Electrocatalysts: From Single Particles to Catalyst-Membrane Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Korzeniewski, Carol [Texas Tech Univ., Lubbock, TX (United States). Department of Chemistry & Biochemistry

    2014-01-20

    The project primary objectives are to prepare and elucidate the promoting properties of materials that possess high activity for the conversion of hydrogen and related small molecules (water, oxygen, carbon monoxide and methanol) in polymer electrolyte fuel cells. One area of research has focused on the study of catalyst materials. Protocols were developed for probing the structure and benchmarking the activity of Pt and Pt bimetallic nanometer-scale catalyst against Pt single crystal electrode standards. A second area has targeted fuel cell membrane and the advancement of simple methods mainly based on vibrational spectroscopy that can be applied broadly in the study of membrane structure and transport properties. Infrared and Raman methods combined with least-squares data modeling were applied to investigate and assist the design of robust, proton conductive membranes, which resist reactant crossover.

  7. Efficient Dual-Site Carbon Monoxide Electro-Catalysts via Interfacial Nano-Engineering

    Science.gov (United States)

    Liu, Zhen; Huang, Zhongyuan; Cheng, Feifei; Guo, Zhanhu; Wang, Guangdi; Chen, Xu; Wang, Zhe

    2016-09-01

    Durable, highly efficient, and economic sound electrocatalysts for CO electrooxidation (COE) are the emerging key for wide variety of energy solutions, especially fuel cells and rechargeable metal-air batteries. Herein, we report the novel system of nickel-aluminum double layered hydroxide (NiAl-LDH) nanoplates on carbon nanotubes (CNTs) network. The formulation of such complexes system was to be induced through the assistance of gold nanoparticles in order to form dual-metal active sites so as to create a extended Au/NiO two phase zone. Bis (trifluoromethylsulfonyl)imide (NTf2) anion of ionic liquid electrolyte was selected to enhance the CO/O2 adsorption and to facilitate electro-catalyzed oxidation of Ni (OH)2 to NiOOH by increasing the electrophilicity of catalytic interface. The resulting neutral catalytic system exhibited ultra-high electrocatalytic activity and stability for CO electrooxidation than commercial and other reported precious metal catalysts. The turnover frequency (TOF) of the LDH-Au/CNTs COE catalyst was much higher than the previous reported other similar electrocatalysts, even close to the activity of solid-gas chemical catalysts at high temperature. Moreover, in the long-term durability testing, the negligible variation of current density remains exsisting after 1000 electrochemistry cycles.

  8. Tandem hydroformylation/hydrogenation of alkenes to normal alcohols using Rh/Ru dual catalyst or Ru single component catalyst.

    Science.gov (United States)

    Takahashi, Kohei; Yamashita, Makoto; Nozaki, Kyoko

    2012-11-14

    The catalyst system for tandem hydroformylation/hydrogenation of terminal alkenes to the corresponding homologated normal alcohol was developed. The reaction mechanism for the Rh/Ru dual catalyst was investigated by real-time IR monitoring experiments and (31)P NMR spectroscopy, which proved the mutual orthogonality of Rh-catalyzed hydroformylation and Ru-catalyzed hydrogenation. Detailed investigation about Ru-catalyzed hydrogenation of undecanal under H(2)/CO pressure clarified different kinetics from the hydrogenation under H(2) and gave a clue to design more active hydrogenation catalysts under H(2)/CO atmosphere. The solely Ru-catalyzed normal selective hydroformylation/hydrogenation is also reported.

  9. Isolated catalyst sites on amorphous supports: A systematic algorithm for understanding heterogeneities in structure and reactivity

    Science.gov (United States)

    Goldsmith, Bryan R.; Sanderson, Evan D.; Bean, Daniel; Peters, Baron

    2013-05-01

    Methods for modeling catalytic sites on amorphous supports lag far behind methods for modeling catalytic sites on metal surfaces, zeolites, and other crystalline materials. One typical strategy for amorphous supports uses cluster models with arbitrarily chosen constraints to model the rigid amorphous support, but these constraints arbitrarily influence catalyst site activity. An alternative strategy is to use no constraints, but this results in catalytic sites with unrealistic flexibility. We present a systematic ab initio method to model isolated active sites on insulating amorphous supports using small cluster models. A sequential quadratic programming framework helps us relate chemical properties, such as the activation energy, to active site structure. The algorithm is first illustrated on an empirical valence bond model energy landscape. We then use the algorithm to model an off-pathway kinetic trap in olefin metathesis by isolated Mo sites on amorphous SiO2. The cluster models were terminated with basis set deficient fluorine atoms to mimic the properties of an extended silica framework. We also discuss limitations of the current algorithm formulation and future directions for improvement.

  10. Fe-N-Doped Mesoporous Carbon with Dual Active Sites Loaded on Reduced Graphene Oxides for Efficient Oxygen Reduction Catalysts.

    Science.gov (United States)

    Zhang, Chao; Liu, Jun; Ye, Yixing; Aslam, Zabeada; Brydson, Rik; Liang, Changhao

    2018-01-24

    Transition metal/nitrogen/carbon (M-N/C) catalysts are considered as one of the most promising candidates to replace Pt/C catalysts for oxygen reduction reactions (ORRs). Here, we have designed novel reduced graphene oxide (rGO)-supported Fe-N-doped carbon (Fe-N-C/rGO) catalysts via simple pyrolysis of polypyrrole (Ppy)-FeO-GO composites. The as-prepared catalysts induced an onset potential of 0.94 V and a half-wave potential of 0.81 V in alkaline solutions, which is much better than those of the counterpart N-C and N-C/rGO catalysts and comparable to that of Pt/C catalysts. Moreover, the Fe-N-C/rGO catalysts showed improved durability and higher tolerance against methanol crossover than Pt/C in alkaline solutions. This superior ORR performance can be ascribed to the combined catalytic effect of both Fe-based nanoparticles (Fe 3 O 4 , Fe 4 C) and Fe-N x sites, as well as fast mass transfer and accessible active sites benefiting from the mesoporous structure and high specific surface area. This work provides new insight for synthesis of a more promising nonplatinum electrocatalyst for metal-air batteries and fuel-cell applications.

  11. Catalytic activity of Pd-doped Cu nanoparticles for hydrogenation as a single-atom-alloy catalyst.

    Science.gov (United States)

    Cao, Xinrui; Fu, Qiang; Luo, Yi

    2014-05-14

    The single atom alloy of extended surfaces is known to provide remarkably enhanced catalytic performance toward heterogeneous hydrogenation. Here we demonstrate from first principles calculations that this approach can be extended to nanostructures, such as bimetallic nanoparticles. The catalytic properties of the single-Pd-doped Cu55 nanoparticles have been systemically examined for H2 dissociation as well as H atom adsorption and diffusion, following the concept of single atom alloy. It is found that doping a single Pd atom at the edge site of the Cu55 shell can considerably reduce the activation energy of H2 dissociation, while the single Pd atom doped at the top site or in the inner layers is much less effective. The H atom adsorption on Cu55 is slightly stronger than that on the Cu(111) surface; however, a larger nanoparticle that contains 147 atoms could effectively recover the weak binding of the H atoms. We have also investigated the H atom diffusion on the 55-atom nanoparticle and found that spillover of the produced H atoms could be a feasible process due to the low diffusion barriers. Our results have demonstrated that facile H2 dissociation and weak H atom adsorption could be combined at the nanoscale. Moreover, the effects of doping one more Pd atom on the H2 dissociation and H atom adsorption have also been investigated. We have found that both the doping Pd atoms in the most stable configuration could independently exhibit their catalytic activity, behaving as two single-atom-alloy catalysts.

  12. Entrapped Single Tungstate Site in Zeolite for Cooperative Catalysis of Olefin Metathesis with Brønsted Acid Site.

    Science.gov (United States)

    Zhao, Pu; Ye, Lin; Sun, Zhenyu; Lo, Benedict T W; Woodcock, Harry; Huang, Chen; Tang, Chiu; Kirkland, Angus I; Mei, Donghai; Tsang, Shik Chi Edman

    2018-04-16

    Industrial olefin metathesis catalysts generally suffer from low reaction rates and require harsh reaction conditions for moderate activities. This is due to their inability to prevent metathesis active sites (MAS) from aggregation and their intrinsic poor adsorption and activation of olefin molecules. Here, isolated tungstate species as single molecular MAS is immobilized inside zeolite pores by Brønsted acid sites (BAS) on the inner surface. It is demonstrated for the first time that unoccupied BAS in atomic proximity to MAS enhance olefin adsorption and greatly facilitate the formation of metallocycle intermediates in a stereospecific manner. Thus, effective cooperative catalysis takes place over the BAS-MAS pair. In consequence, for the cross-metathesis of ethene and trans-2-butene to propene, under the same mild reaction conditions, the propene production rate over WOx/USY is ca. 7,300 times that over the industrial WO3/SiO2 based catalyst. A propene yield up to 79% (80% selectivity) without observable deactivation was obtained over WOx/USY for a wide range of reaction conditions.

  13. Electrochemical reduction of CO2on graphene supported transition metals - towards single atom catalysts.

    Science.gov (United States)

    He, Haiying; Jagvaral, Yesukhei

    2017-05-10

    In this study, we have investigated the use of single metal atoms supported on defective graphene as catalysts for the electrochemical reduction of CO 2 using the first-principles approach and the computational hydrogen electrode model. Reaction pathways to produce a variety of C 1 products CO, HCOOH, HCHO, CH 3 OH and CH 4 have been studied in detail for five representative transition metals Ag, Cu, Pd, Pt, and Co. Different pathways were revealed in contrast to those found for metallic crystalline surfaces and nanoparticles. These single atom catalysts have demonstrated a general improvement in rate limiting potentials to generate C 1 hydrocarbons. They also show distinct differences in terms of their efficiency and selectivity in CO 2 reduction, which can be correlated with their elemental properties as a function of their group number in the periodic table. Six best candidates for CH 4 production are identified by conducting computational screening of 28 d-block transition metals. Ag has the lowest overpotential (0.73 V), and is followed by Zn, Ni, Pd, Pt and Ru with overpotentials all below 1 V. Cu in the supported single atom form shows a strong preference towards producing CH 3 OH with an overpotential of 0.68 V well below the value of 1.04 V for producing CH 4 .

  14. Alargamento da distribuição de massa molar de polímeros sintetizados com catalisadores metalocênicos dual-site Broadening of molecular weight distribution of polymers synthesized by metallocene-based dual-site catalysts

    Directory of Open Access Journals (Sweden)

    João H. Z. dos Santos

    2008-01-01

    Full Text Available The main topics related to the use of dual-site catalysts in the production of polymers with broad molecular weight distribution are reviewed. The polymerization using dual-site catalysts is more economical and allows to produce a higher quality product than other processes, such as polymer blend and multistage reactors. However, the formulation of these catalysts is quite complicated since the same catalyst must produce distinct polymer grades. In addition, the release of patents concerning the combination of metallocenes and new technologies for polymerization shows that polymerization processes using dual-site catalysts are of current industrial interest.

  15. Broadening of molecular weight distribution of polymers synthesized by metallocene-based dual-site catalysts; Alargamento da distribuicao de massa molar de polimeros sintetizados com catalisadores metalocenicos dual-site

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joao H.Z. dos [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica]. E-mail: jhzds@iq.ufrgs.br; Fisch, Adriano G.; Cardozo, Nilo S.M.; Secchi, Argimiro R. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Dept. de Engenharia Quimica

    2008-07-01

    The main topics related to the use of dual-site catalysts in the production of polymers with broad molecular weight distribution are reviewed. The polymerization using dual-site catalysts is more economical and allows to produce a higher quality product than other processes, such as polymer blend and multistage reactors. However, the formulation of these catalysts is quite complicated since the same catalyst must produce distinct polymer grades. In addition, the release of patents concerning the combination of metallocenes and new technologies for polymerization shows that polymerization processes using dual-site catalysts are of current industrial interest. (author)

  16. Real-Time Visualization of Active Species in a Single-Site Metal–Organic Framework Photocatalyst

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Sizhuo [Department of Chemistry, Marquette University, Milwaukee, Wisconsin 53201, United States; Pattengale, Brian [Department of Chemistry, Marquette University, Milwaukee, Wisconsin 53201, United States; Lee, Sungsik [X-ray Science Division, Argonne National Laboratory, Argonne, Illinois 60349, United States; Huang, Jier [Department of Chemistry, Marquette University, Milwaukee, Wisconsin 53201, United States

    2018-02-06

    In this work, we report a new single-site photocatalyst (Co-Ru-UIO- 67(bpy)) based on a metal-organic framework platform with incorporated molecular photosensitizer and catalyst. We show that this catalyst not only demonstrates exceptional activity for light-driven H2 production but also can be recycled without loss of activity. Using the combination of optical transient absorption spectroscopy and in situ X-ray absorption spectroscopy, we not only captured the key CoI intermediate species formed after ultrafast charge transfer from the incorporated photosensitizer but also identified the rate-limiting step in the catalytic cycle, providing insight into the catalysis mechanism of these single-site metal-organic framework photocatalysts.

  17. Active sites and mechanisms for H2O2 decomposition over Pd catalysts

    Science.gov (United States)

    Plauck, Anthony; Stangland, Eric E.; Dumesic, James A.; Mavrikakis, Manos

    2016-01-01

    A combination of periodic, self-consistent density functional theory (DFT-GGA-PW91) calculations, reaction kinetics experiments on a SiO2-supported Pd catalyst, and mean-field microkinetic modeling are used to probe key aspects of H2O2 decomposition on Pd in the absence of cofeeding H2. We conclude that both Pd(111) and OH-partially covered Pd(100) surfaces represent the nature of the active site for H2O2 decomposition on the supported Pd catalyst reasonably well. Furthermore, all reaction flux in the closed catalytic cycle is predicted to flow through an O–O bond scission step in either H2O2 or OOH, followed by rapid H-transfer steps to produce the H2O and O2 products. The barrier for O–O bond scission is sensitive to Pd surface structure and is concluded to be the central parameter governing H2O2 decomposition activity. PMID:27006504

  18. Site-isolation effects in a dendritic nickel catalyst for the oligomerization of ethylene.

    Science.gov (United States)

    Müller, Christian; Ackerman, Lily J; Reek, Joost N H; Kamer, Paul C J; van Leeuwen, Piet W N M

    2004-11-17

    Dendrimers, specifically suited to construct site-isolated groups due to their well-defined hyperbranched structure, have been used as a ligand design element for the construction of nickel catalysts for ethylene oligomerization. The dendritic P,O ligand indeed suppresses the formation of inactive bis(P,O)Ni complexes in toluene, as is evident from NMR studies, and, as a consequence, outperforms the parent ligand in catalysis in this solvent. The dendritic effect observed in methanol is more subtle because both the dendritic ligand 1 and the parent 2 form bis(P,O)nickel complexes in solution according to NMR spectroscopy. Unlike the parent complex 8, the dendritic bis(P,O)Ni complex 7 derived from dendrimer ligand 1 is able to dissociate to a mono-ligated species under catalytic conditions, that is, 40 bar ethylene and 80 degrees C, which can enter the catalytic cycle. Indeed, dendritic ligand 1 gives much more active nickel catalysts for the oligomerization in methanol than does 2.

  19. High utilization platinum deposition on single-walled carbon nanotubes as catalysts for direct methanol fuel cell

    International Nuclear Information System (INIS)

    Wang, J.J.; Yin, G.P.; Zhang, J.; Wang, Z.B.; Gao, Y.Z.

    2007-01-01

    This research aims to enhance the activity of Pt catalysts, thus to lower the loading of Pt metal in fuel cell. Highly dispersed platinum supported on single-walled carbon nanotubes (SWNTs) as catalyst was prepared by ion exchange method. The homemade Pt/SWNTs underwent a repetition of ion exchange and reduction process in order to achieve an increase of the metal loading. For comparison, the similar loading of Pt catalyst supported on carbon nanotubes was prepared by borohydride reduction method. The catalysts were characterized by using energy dispersive analysis of X-ray (EDAX), transmission electron micrograph (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectrum (XPS). Compared with the Pt/SWNTs catalyst prepared by borohydride method, higher Pt utilization was achieved on the SWNTs by ion exchange method. Furthermore, in comparison to the E-TEK 20 wt.% Pt/C catalyst with the support of carbon black, the results from electrochemical measurement indicated that the Pt/SWNTs prepared by ion exchange method displayed a higher catalytic activity for methanol oxidation and higher Pt utilization, while no significant increasing in the catalytic activity of the Pt/SWNTs catalyst obtained by borohydride method

  20. Hydrogenation of biofuels with formic acid over a palladium-based ternary catalyst with two types of active sites.

    Science.gov (United States)

    Wang, Liang; Zhang, Bingsen; Meng, Xiangju; Su, Dang Sheng; Xiao, Feng-Shou

    2014-06-01

    A composite catalyst including palladium nanoparticles on titania (TiO2) and on nitrogen-modified porous carbon (Pd/TiO2@N-C) is synthesized from palladium salts, tetrabutyl titanate, and chitosan. N2 sorption isotherms show that the catalyst has a high BET surface area (229 m(2)  g(-1)) and large porosity. XPS and TEM characterization of the catalyst shows that palladium species with different chemical states are well dispersed across the TiO2 and nitrogen-modified porous carbon, respectively. The Pd/TiO2@N-C catalyst is very active and shows excellent stability towards hydrogenation of vanillin to 2-methoxy-4-methylphenol using formic acid as hydrogen source. This activity can be attributed to a synergistic effect between the Pd/TiO2 (a catalyst for dehydrogenation of formic acid) and Pd/N-C (a catalyst for hydrogenation of vanillin) sites. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Metal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles.

    Science.gov (United States)

    Liu, Lichen; Corma, Avelino

    2018-04-16

    Metal species with different size (single atoms, nanoclusters, and nanoparticles) show different catalytic behavior for various heterogeneous catalytic reactions. It has been shown in the literature that many factors including the particle size, shape, chemical composition, metal-support interaction, and metal-reactant/solvent interaction can have significant influences on the catalytic properties of metal catalysts. The recent developments of well-controlled synthesis methodologies and advanced characterization tools allow one to correlate the relationships at the molecular level. In this Review, the electronic and geometric structures of single atoms, nanoclusters, and nanoparticles will be discussed. Furthermore, we will summarize the catalytic applications of single atoms, nanoclusters, and nanoparticles for different types of reactions, including CO oxidation, selective oxidation, selective hydrogenation, organic reactions, electrocatalytic, and photocatalytic reactions. We will compare the results obtained from different systems and try to give a picture on how different types of metal species work in different reactions and give perspectives on the future directions toward better understanding of the catalytic behavior of different metal entities (single atoms, nanoclusters, and nanoparticles) in a unifying manner.

  2. Self-Anchored Catalyst Interface Enables Ordered Via Array Formation from Submicrometer to Millimeter Scale for Polycrystalline and Single-Crystalline Silicon.

    Science.gov (United States)

    Kim, Jeong Dong; Kim, Munho; Kong, Lingyu; Mohseni, Parsian K; Ranganathan, Srikanth; Pachamuthu, Jayavel; Chim, Wai Kin; Chiam, Sing Yang; Coleman, James J; Li, Xiuling

    2018-03-14

    Defying text definitions of wet etching, metal-assisted chemical etching (MacEtch), a solution-based, damage-free semiconductor etching method, is directional, where the metal catalyst film sinks with the semiconductor etching front, producing 3D semiconductor structures that are complementary to the metal catalyst film pattern. The same recipe that works perfectly to produce ordered array of nanostructures for single-crystalline Si (c-Si) fails completely when applied to polycrystalline Si (poly-Si) with the same doping type and level. Another long-standing challenge for MacEtch is the difficulty of uniformly etching across feature sizes larger than a few micrometers because of the nature of lateral etching. The issue of interface control between the catalyst and the semiconductor in both lateral and vertical directions over time and over distance needs to be systematically addressed. Here, we present a self-anchored catalyst (SAC) MacEtch method, where a nanoporous catalyst film is used to produce nanowires through the pinholes, which in turn physically anchor the catalyst film from detouring as it descends. The systematic vertical etch rate study as a function of porous catalyst diameter from 200 to 900 nm shows that the SAC-MacEtch not only confines the etching direction but also enhances the etch rate due to the increased liquid access path, significantly delaying the onset of the mass-transport-limited critical diameter compared to nonporous catalyst c-Si counterpart. With this enhanced mass transport approach, vias on multistacks of poly-Si/SiO 2 are also formed with excellent vertical registry through the polystack, even though they are separated by SiO 2 which is readily removed by HF alone with no anisotropy. In addition, 320 μm square through-Si-via (TSV) arrays in 550 μm thick c-Si are realized. The ability of SAC-MacEtch to etch through poly/oxide/poly stack as well as more than half millimeter thick silicon with excellent site specificity for a wide

  3. Elucidating the mechanism and active site of the cyclohexanol dehydrogenation on copper-based catalysts: A density functional theory study

    Science.gov (United States)

    Wang, Ziyun; Liu, Xinyi; Rooney, D. W.; Hu, P.

    2015-10-01

    The dehydrogenation of cyclohexanol to cyclohexanone is very important in the manufacture of nylon. Copper-based catalysts are the most popular catalysts for this reaction, and on these catalysts the reaction mechanism and active site are in debate. In order to elucidate the mechanism and active site of the cyclohexanol dehydrogenation on copper-based catalysts, density functional theory with dispersion corrections were performed on up to six facets of copper in two different oxidation states: monovalent copper and metallic copper. By calculating the surface energies of these facets, Cu(111) and Cu2O(111) were found to be the most stable facets for metallic copper and for monovalent copper, respectively. On these two facets, all the possible elementary steps in the dehydrogenation pathway of cyclohexanol were calculated, including the adsorption, dehydrogenation, hydrogen coupling and desorption. Two different reaction pathways for dehydrogenation were considered on both surfaces. It was revealed that the dehydrogenation mechanisms are different on these two surfaces: on Cu(111) the hydrogen belonging to the hydroxyl is removed first, then the hydrogen belonging to the carbon is subtracted, while on Cu2O(111) the hydrogen belonging to the carbon is removed followed by the subtraction of the hydrogen in the hydroxyl group. Furthermore, by comparing the energy profiles of these two surfaces, Cu2O(111) was found to be more active for cyclohexanol dehydrogenation than Cu(111). In addition, we found that the coordinatively unsaturated copper sites on Cu2O(111) are the reaction sites for all the steps. Therefore, the coordinatively unsaturated copper site on Cu2O(111) is likely to be the active site for cyclohexanol dehydrogenation on the copper-based catalysts.

  4. Growth Mechanism of Single-Walled Carbon Nanotubes on Iron–Copper Catalyst and Chirality Studies by Electron Diffraction

    DEFF Research Database (Denmark)

    He, Maoshuai; Liu, Bilu; Chernov, Alexander I.

    2012-01-01

    Chiralities of single-walled carbon nanotubes grown on an atomic layer deposition prepared bimetallic FeCu/MgO catalyst were evaluated quantitatively using nanobeam electron diffraction. The results reveal that the growth yields nearly 90% semiconducting tubes, 45% of which are of the (6,5) type....... by impregnation, showing similar catalytic performance as the atomic layer deposition-prepared catalyst, yielding single-walled carbon nanotubes with a similar narrow chirality distribution.......Chiralities of single-walled carbon nanotubes grown on an atomic layer deposition prepared bimetallic FeCu/MgO catalyst were evaluated quantitatively using nanobeam electron diffraction. The results reveal that the growth yields nearly 90% semiconducting tubes, 45% of which are of the (6,5) type....... The growth mechanisms as well as the roles of different components in the catalyst were studied in situ using environmental transmission electron microscopy and infrared spectroscopy. On the basis of the understanding of carbon nanotube growth mechanisms, an MgO-supported FeCu catalyst was prepared...

  5. Atomic-level insights in optimizing reaction paths for hydroformylation reaction over Rh/CoO single-atom catalyst.

    Science.gov (United States)

    Wang, Liangbing; Zhang, Wenbo; Wang, Shenpeng; Gao, Zehua; Luo, Zhiheng; Wang, Xu; Zeng, Rui; Li, Aowen; Li, Hongliang; Wang, Menglin; Zheng, Xusheng; Zhu, Junfa; Zhang, Wenhua; Ma, Chao; Si, Rui; Zeng, Jie

    2016-12-22

    Rh-based heterogeneous catalysts generally have limited selectivity relative to their homogeneous counterparts in hydroformylation reactions despite of the convenience of catalyst separation in heterogeneous catalysis. Here, we develop CoO-supported Rh single-atom catalysts (Rh/CoO) with remarkable activity and selectivity towards propene hydroformylation. By increasing Rh mass loading, isolated Rh atoms switch to aggregated clusters of different atomicity. During the hydroformylation, Rh/CoO achieves the optimal selectivity of 94.4% for butyraldehyde and the highest turnover frequency number of 2,065 h -1 among the obtained atomic-scale Rh-based catalysts. Mechanistic studies reveal that a structural reconstruction of Rh single atoms in Rh/CoO occurs during the catalytic process, facilitating the adsorption and activation of reactants. In kinetic view, linear products are determined as the dominating products by analysing reaction paths deriving from the two most stable co-adsorbed configurations. As a bridge of homogeneous and heterogeneous catalysis, single-atom catalysts can be potentially applied in other industrial reactions.

  6. On the role of strength and location of Bronsted acid sites for ethylamine synthesis on mordenite catalysts

    NARCIS (Netherlands)

    Veefkind, V.A.; Smidt, M.L.; Lercher, J.A.

    2000-01-01

    The elementary steps of alkylation of ammonia with ethanol and the role of the strength and location of the acid sites of the mordenite catalysts were investigated by means of in situ i.r. spectroscopy, temperature-programmed desorption and kinetic measurements. Ethanol and ammonia have access to

  7. Surface tailored single walled carbon nanotubes as catalyst support for direct methanol fuel cell

    Science.gov (United States)

    Kireeti, Kota V. M. K.; Jha, Neetu

    2017-10-01

    A strategy for tuning the surface property of Single Walled Carbon Nanotubes (SWNTs) for enhanced methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) along with methanol tolerance is presented. The surface functionality is tailored using controlled acid and base treatment. Acid treatment leads to the attachment of carboxylic carbon (CC) fragments to SWNT making it hydrophilic (P3-SWNT). Base treatment of P3-SWNT with 0.05 M NaOH reduces the CCs and makes it hydrophobic (P33-SWNT). Pt catalyst supported on the P3-SWNT possesses enhanced MOR whereas that supported on P33-SWNT not only enhances ORR kinetics but also possess good tolerance towards methanol oxidation as verified by the electrochemical technique.

  8. Laser-Induced Fluorescence Detection in High-Throughput Screening of Heterogeneous Catalysts and Single Cells Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Su, Hui [Iowa State Univ., Ames, IA (United States)

    2001-01-01

    Laser-induced fluorescence detection is one of the most sensitive detection techniques and it has found enormous applications in various areas. The purpose of this research was to develop detection approaches based on laser-induced fluorescence detection in two different areas, heterogeneous catalysts screening and single cell study. First, we introduced laser-induced imaging (LIFI) as a high-throughput screening technique for heterogeneous catalysts to explore the use of this high-throughput screening technique in discovery and study of various heterogeneous catalyst systems. This scheme is based on the fact that the creation or the destruction of chemical bonds alters the fluorescence properties of suitably designed molecules. By irradiating the region immediately above the catalytic surface with a laser, the fluorescence intensity of a selected product or reactant can be imaged by a charge-coupled device (CCD) camera to follow the catalytic activity as a function of time and space. By screening the catalytic activity of vanadium pentoxide catalysts in oxidation of naphthalene, we demonstrated LIFI has good detection performance and the spatial and temporal resolution needed for high-throughput screening of heterogeneous catalysts. The sample packing density can reach up to 250 x 250 subunits/cm2 for 40-μm wells. This experimental set-up also can screen solid catalysts via near infrared thermography detection.

  9. Chemical imaging of single catalyst particles with scanning μ-XANES-CT and μ-XRF-CT.

    Science.gov (United States)

    Price, S W T; Ignatyev, K; Geraki, K; Basham, M; Filik, J; Vo, N T; Witte, P T; Beale, A M; Mosselmans, J F W

    2015-01-07

    The physicochemical state of a catalyst is a key factor in determining both activity and selectivity; however these materials are often not structurally or compositionally homogeneous. Here we report on the 3-dimensional imaging of an industrial catalyst, Mo-promoted colloidal Pt supported on carbon. The distribution of both the active Pt species and Mo promoter have been mapped over a single particle of catalyst using microfocus X-ray fluorescence computed tomography. X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure revealed a mixed local coordination environment, including the presence of both metallic Pt clusters and Pt chloride species, but also no direct interaction between the catalyst and Mo promoter. We also report on the benefits of scanning μ-XANES computed tomography for chemical imaging, allowing for 2- and 3-dimensional mapping of the local electronic and geometric environment, in this instance for both the Pt catalyst and Mo promoter throughout the catalyst particle.

  10. On multi-site damage identification using single-site training data

    Science.gov (United States)

    Barthorpe, R. J.; Manson, G.; Worden, K.

    2017-11-01

    This paper proposes a methodology for developing multi-site damage location systems for engineering structures that can be trained using single-site damaged state data only. The methodology involves training a sequence of binary classifiers based upon single-site damage data and combining the developed classifiers into a robust multi-class damage locator. In this way, the multi-site damage identification problem may be decomposed into a sequence of binary decisions. In this paper Support Vector Classifiers are adopted as the means of making these binary decisions. The proposed methodology represents an advancement on the state of the art in the field of multi-site damage identification which require either: (1) full damaged state data from single- and multi-site damage cases or (2) the development of a physics-based model to make multi-site model predictions. The potential benefit of the proposed methodology is that a significantly reduced number of recorded damage states may be required in order to train a multi-site damage locator without recourse to physics-based model predictions. In this paper it is first demonstrated that Support Vector Classification represents an appropriate approach to the multi-site damage location problem, with methods for combining binary classifiers discussed. Next, the proposed methodology is demonstrated and evaluated through application to a real engineering structure - a Piper Tomahawk trainer aircraft wing - with its performance compared to classifiers trained using the full damaged-state dataset.

  11. Pt-Fe catalyst nanoparticles supported on single-wall carbon nanotubes: Direct synthesis and electrochemical performance for methanol oxidation

    Science.gov (United States)

    Ma, Xiaohui; Luo, Liqiang; Zhu, Limei; Yu, Liming; Sheng, Leimei; An, Kang; Ando, Yoshinori; Zhao, Xinluo

    2013-11-01

    Single-wall carbon nanotubes (SWCNTs) supported Pt-Fe nanoparticles have been prepared by one-step hydrogen arc discharge evaporation of carbon electrode containing both Pt and Fe metal elements. The formation of SWCNTs and Pt-Fe nanoparticles occur simultaneously during the evaporation process. High-temperature hydrogen treatment and hydrochloric acid soaking have been carried out to purify and activate those materials in order to obtain a new type of Pt-Fe/SWCNTs catalyst for methanol oxidation. The Pt-Fe/SWCNTs catalyst performs much higher electrocatalytic activity for methanol oxidation, better stability and better durability than a commercial Pt/C catalyst according to the electrochemical measurements, indicating that it has a great potential for applications in direct methanol fuel cells.

  12. Single-site neural tube closure in human embryos revisited.

    Science.gov (United States)

    de Bakker, Bernadette S; Driessen, Stan; Boukens, Bastiaan J D; van den Hoff, Maurice J B; Oostra, Roelof-Jan

    2017-10-01

    Since the multi-site closure theory was first proposed in 1991 as explanation for the preferential localizations of neural tube defects, the closure of the neural tube has been debated. Although the multi-site closure theory is much cited in clinical literature, single-site closure is most apparent in literature concerning embryology. Inspired by Victor Hamburgers (1900-2001) statement that "our real teacher has been and still is the embryo, who is, incidentally, the only teacher who is always right", we decided to critically review both theories of neural tube closure. To verify the theories of closure, we studied serial histological sections of 10 mouse embryos between 8.5 and 9.5 days of gestation and 18 human embryos of the Carnegie collection between Carnegie stage 9 (19-21 days) and 13 (28-32 days). Neural tube closure was histologically defined by the neuroepithelial remodeling of the two adjoining neural fold tips in the midline. We did not observe multiple fusion sites in neither mouse nor human embryos. A meta-analysis of case reports on neural tube defects showed that defects can occur at any level of the neural axis. Our data indicate that the human neural tube fuses at a single site and, therefore, we propose to reinstate the single-site closure theory for neural tube closure. We showed that neural tube defects are not restricted to a specific location, thereby refuting the reasoning underlying the multi-site closure theory. Clin. Anat. 30:988-999, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  13. Laser-Induced Fluorescence Detection in High-Throughput Screening of Heterogeneous Catalysts and Single Cells Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Su, Hui [Iowa State Univ., Ames, IA (United States)

    2001-01-01

    Laser-induced fluorescence detection is one of the most sensitive detection techniques and it has found enormous applications in various areas. The purpose of this research was to develop detection approaches based on laser-induced fluorescence detection in two different areas, heterogeneous catalysts screening and single cell study. First, the author introduced laser-induced imaging (LIFI) as a high-throughput screening technique for heterogeneous catalysts to explore the use of this high-throughput screening technique in discovery and study of various heterogeneous catalyst systems. This scheme is based on the fact that the creation or the destruction of chemical bonds alters the fluorescence properties of suitably designed molecules. By irradiating the region immediately above the catalytic surface with a laser, the fluorescence intensity of a selected product or reactant can be imaged by a charge-coupled device (CCD) camera to follow the catalytic activity as a function of time and space. By screening the catalytic activity of vanadium pentoxide catalysts in oxidation of naphthalene, they demonstrated LIFI has good detection performance and the spatial and temporal resolution needed for high-throughput screening of heterogeneous catalysts. The sample packing density can reach up to 250 x 250 subunits/cm2 for 40-μm wells. This experimental set-up also can screen solid catalysts via near infrared thermography detection. In the second part of this dissertation, the author used laser-induced native fluorescence coupled with capillary electrophoresis (LINF-CE) and microscope imaging to study the single cell degranulation. On the basis of good temporal correlation with events observed through an optical microscope, they have identified individual peaks in the fluorescence electropherograms as serotonin released from the granular core on contact with the surrounding fluid.

  14. Potential of Transition Metal Atoms Embedded in Buckled Monolayer g-C3N4 as Single-Atom Catalysts

    KAUST Repository

    Li, Shu-Long

    2017-10-27

    We use first-principles calculations to systematically explore the potential of transition metal atoms (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, and Au) embedded in buckled monolayer g-C3N4 as single-atom catalysts. We show that clustering of Sc and Ti on g-C3N4 is thermodynamically impeded and that V, Cr, Mn, and Cu are much less susceptible to clustering than the other TM atoms under investigation. Strong bonding of the transition metal atoms in the cavities of g-C3N4 and high diffusion barriers together are responsible for single-atom fixation. Analysis of the CO oxidation process indicates that embedding of Cr and Mn in g-C3N4 gives rise to promising single-atom catalysts at low temperature.

  15. New insights into Cu/SSZ-13 SCR catalyst acidity. Part I: Nature of acidic sites probed by NH 3 titration

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Jinyong; Gao, Feng; Kamasamudram, Krishna; Currier, Neal; Peden, Charles H. F.; Yezerets, Aleksey

    2017-04-01

    In this work we investigated an unusual acidity feature of a Cu/SSZ-13 catalyst used in selective catalytic reduction of NOx with NH3 (NH3-SCR). In particular, this catalyst showed two distinct NH3 desorption peaks in NH3-TPD measurements, in contrast to single, unresolved desorption peaks observed for other Cu-exchanged zeolites conventionally used in the SCR studies, including its isostructural but chemically different analogue Cu/SAPO-34. We further observed that the intensities of the two TPD peaks, which represented the amount of stored NH3, changed in opposite directions in response to progressive mild hydrothermal aging, while the total storage capacity was preserved. We proposed an explanation for this remarkable behavior, by using model reference samples and additional characterization techniques. At least three NH3 storage sites were identified: two distinct populations of Cu sites responsible for low-temperature NH3 storage, and Brønsted acid sites responsible for high-temperature NH3 storage. Contrary to the commonly accepted mechanism that Brønsted acid site loss during hydrothermal aging is driven by dealumination, we concluded that the decline in the number of Brønsted acid sites upon mild hydrothermal aging for Cu/SSZ-13 was not due to dealumination, but rather transformation of Cu sites, i.e., gradual conversion of ZCuOH (Cu2+ singly coordinated with Zeolite) to Z2Cu (Cu2+ doubly coordinated with Zeolite). This transformation was responsible for the increased low-temperature desorption peak in NH3-TPD since each ZCuOH adsorbed ~1 NH3 molecule while each Z2Cu adsorbed ~2 NH3 molecules under the conditions used here. These findings were used in Part II of this series of studies to develop a method for quantifying hydrothermal ageing of industrial Cu/SSZ-13 SCR catalysts. Authors would like to thank Randall Jines for his help with collecting the reactor data, Nancy W. Washton for measuring the NMR data and Tamas Varga for in-situ XRD measurements

  16. First case of robotic laparoendoscopic single-site radical prostatectomy with single-site VesPa platform.

    Science.gov (United States)

    Mattevi, D; Luciani, L G; Vattovani, V; Chiodini, S; Puglisi, M; Malossini, G

    2017-07-07

    This study aimed at reporting our first experience with robotic laparoendoscopic single-site radical prostatectomy (R-LESS-RP) with single-site VesPa platform (Intuitive Surgical Inc.). A 68-year-old-man presenting with a cT1c adenocarcinoma Gleason Score 3 + 4 = 7 in 4/12 bilateral cores underwent a transperitoneal robotic LESS-RP with a single-site Vespa platform. Initial PSA, prostate weight, and body mass index (BMI) were 4.4 ng/ml, 45 g, and 25, respectively. Instruments and camera cross within the Single-Site port; the da Vinci System software detects and reassigns the user's hands with the instruments position. The single-site port is inserted through a 2-cm intraumbilical incision. The robotic 8.5 mm scope and two surgical curved instruments (fenestrated bipolar forceps and cautery hook) are introduced through the ports and used for most of the procedure, whereas a wristed needle driver on the right hand is used for the reconstructive steps. An additional 12 mm port (Air Seal, SurgiQuest) is placed in a midline between the umbilicus and the right iliac spine in order to facilitate table assistance during surgery and to place a drain at the end of the procedure.Operative time and blood loss were 300 min and 400 mL, respectively. The postoperative course was uneventful. The drain and the catheter were removed on days 1 and 6, respectively. The patient experienced a temporary mild stress incontinence (one pad at sixth month) and erectile dysfunction.Our first robotic laparoendoscopic single-site radical prostatectomy (R-LESS-RP) with the single-site VesPa platform was associated with acceptable operative times and perioperative outcome. This procedure is feasible without complications, provided that a proper patient selection has occurred. Limited movements together with the lack of the fourth robotic arm require a considerable expertise in robotic surgery. Some tricks can help overcome technical limitations. The Robotic LESS-RP reduces in some

  17. Evaluating differences in the active-site electronics of supported Au nanoparticle catalysts using Hammett and DFT studies

    Science.gov (United States)

    Kumar, Gaurav; Tibbitts, Luke; Newell, Jaclyn; Panthi, Basu; Mukhopadhyay, Ahana; Rioux, Robert M.; Pursell, Christopher J.; Janik, Michael; Chandler, Bert D.

    2018-03-01

    Supported metal catalysts, which are composed of metal nanoparticles dispersed on metal oxides or other high-surface-area materials, are ubiquitous in industrially catalysed reactions. Identifying and characterizing the catalytic active sites on these materials still remains a substantial challenge, even though it is required to guide rational design of practical heterogeneous catalysts. Metal-support interactions have an enormous impact on the chemistry of the catalytic active site and can determine the optimum support for a reaction; however, few direct probes of these interactions are available. Here we show how benzyl alcohol oxidation Hammett studies can be used to characterize differences in the catalytic activity of Au nanoparticles hosted on various metal-oxide supports. We combine reactivity analysis with density functional theory calculations to demonstrate that the slope of experimental Hammett plots is affected by electron donation from the underlying oxide support to the Au particles.

  18. Confined-interface-directed synthesis of Palladium single-atom catalysts on graphene/amorphous carbon

    DEFF Research Database (Denmark)

    Xi, Jiangbo; Sun, Hongyu; Zhang, Zheye

    2018-01-01

    The maximized atomic efficiency of supported catalysts is highly desired in heterogeneous catalysis. Therefore, the design and development of active, stable, and atomic metal-based catalysts remains a formidable challenge. To tackle these problems, it is necessary to investigate the interaction b...

  19. Heterogeneous Single-Atom Catalyst for Visible-Light-Driven High-Turnover CO2 Reduction: The Role of Electron Transfer.

    Science.gov (United States)

    Gao, Chao; Chen, Shuangming; Wang, Ying; Wang, Jiawen; Zheng, Xusheng; Zhu, Junfa; Song, Li; Zhang, Wenkai; Xiong, Yujie

    2018-03-01

    Visible-light-driven conversion of CO 2 into chemical fuels is an intriguing approach to address the energy and environmental challenges. In principle, light harvesting and catalytic reactions can be both optimized by combining the merits of homogeneous and heterogeneous photocatalysts; however, the efficiency of charge transfer between light absorbers and catalytic sites is often too low to limit the overall photocatalytic performance. In this communication, it is reported that the single-atom Co sites coordinated on the partially oxidized graphene nanosheets can serve as a highly active and durable heterogeneous catalyst for CO 2 conversion, wherein the graphene bridges homogeneous light absorbers with single-atom catalytic sites for the efficient transfer of photoexcited electrons. As a result, the turnover number for CO production reaches a high value of 678 with an unprecedented turnover frequency of 3.77 min -1 , superior to those obtained with the state-of-the-art heterogeneous photocatalysts. This work provides fresh insights into the design of catalytic sites toward photocatalytic CO 2 conversion from the angle of single-atom catalysis and highlights the role of charge kinetics in bridging the gap between heterogeneous and homogeneous photocatalysts. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Integrated Transmission Electron and Single-Molecule Fluorescence Microscopy Correlates Reactivity with Ultrastructure in a Single Catalyst Particle

    NARCIS (Netherlands)

    Hendriks, Frank C.|info:eu-repo/dai/nl/412642697; Mohammadian, Sajjad|info:eu-repo/dai/nl/374721327; Ristanovic, Zoran|info:eu-repo/dai/nl/328233005; Kalirai, Samanbir; Meirer, Florian; Vogt, Eelco T. C.|info:eu-repo/dai/nl/073717398; Bruijnincx, Pieter C. A.|info:eu-repo/dai/nl/33799529X; Gerritsen, Hans|info:eu-repo/dai/nl/071548777; Weckhuysen, Bert M.|info:eu-repo/dai/nl/285484397

    2018-01-01

    Establishing structure–activity relationships in complex, hierarchically structured nanomaterials, such as fluid catalytic cracking (FCC) catalysts, requires characterization with complementary, correlated analysis techniques. An integrated setup has been developed to perform transmission electron

  1. Single-site robotic cholecystectomy: efficiency and cost analysis.

    Science.gov (United States)

    Buzad, Francis A; Corne, Louis M; Brown, Thomas C; Fagin, Randy S; Hebert, April E; Kaczmarek, Charles A; Pack, Angie N; Payne, Thomas N

    2013-09-01

    Single-incision surgery has gained in popularity, and the recent development of specialized robotic and laparoscopic instruments may remove some of the ergonomic and technical difficulties associated with this approach. However, questions of cost and efficiency remain. We prospectively collected perioperative outcome and efficiency (operative time, case volume) data for our single-site robotic cholecystectomy cases and retrospectively reviewed data for our single-incision laparoscopic cholecystectomy cases. There were no differences in patient characteristics or perioperative outcomes between the robotic (n = 20) and laparoscopic (n = 10) groups; operative times were equivalent (84.6 vs 85.5 min; p = 0.8737) and blood loss and complications were minimal. There was a higher robotic case volume, with an average of two robotic cases (range 1-4)/day vs one/day for laparoscopic cases (range 1-1; p = 0.0306). Streamlined instrument costs were essentially equivalent. Robotic single-site cholecystectomy is a safe, cost-effective alternative to single-incision laparoscopic cholecystectomy in a robot-existing model. Copyright © 2013 John Wiley & Sons, Ltd.

  2. Metal-Catalyst-Free Synthesis and Characterization of Single-Crystalline Silicon Oxynitride Nanowires

    Directory of Open Access Journals (Sweden)

    Shuang Xi

    2012-01-01

    Full Text Available Large quantities of single-crystal silicon oxynitride nanowires with high N concentration have been synthesized directly on silicon substrate at 1200°C without using any metal catalyst. The diameter of these ternary nanowires is ranging from 10 to 180 nm with log-normal distribution, and the length of these nanowires varies from a few hundreds of micrometers to several millimeters. A vapor-solid mechanism was proposed to explain the growth of the nanowires. These nanowires are grown to form a disordered mat with an ultrabright white nonspecular appearance. The mat demonstrates highly diffusive reflectivity with the optical reflectivity of around 80% over the whole visible wavelength, which is comparable to the most brilliant white beetle scales found in nature. The whiteness might be resulted from the strong multiscattering of a large fraction of incident light on the disordered nanowire mat. These ultra-bright white nanowires could form as reflecting surface to meet the stringent requirements of bright-white light-emitting-diode lighting for higher optical efficiency. They can also find applications in diverse fields such as sensors, cosmetics, paints, and tooth whitening.

  3. Catalyst-free site-specific surface modifications of nanocrystalline diamond films via microchannel cantilever spotting

    Czech Academy of Sciences Publication Activity Database

    Davydova, Marina; de los Santos Pereira, Andres; Bruns, M.; Kromka, Alexander; Ukraintsev, Egor; Hirtz, M.; Rodriguez-Emmenegger, Cesar

    2016-01-01

    Roč. 6, č. 63 (2016), s. 57820-57827 ISSN 2046-2069 R&D Projects: GA ČR(CZ) GP14-06054P Institutional support: RVO:68378271 ; RVO:61389013 Keywords : catalysts * nanocrystals * photonic devices * catalyst-free * functionalizations * high reproducibility * micropatterned * multicomponents Subject RIV: BO - Biophysics; CD - Macromolecular Chemistry (UMCH-V) Impact factor: 3.108, year: 2016

  4. Direct partial oxidation of methane via single-site chemistry

    Science.gov (United States)

    Kakekhani, Arvin; Norskov, Jens

    Methane (CH4), the cheapest source of hydrocarbons, is a difficult-to-store and hard-to-convert chemical, due to strong and isotropic C-H bonds. Having a selective and efficient method to partially oxidize methane into more useful chemicals including methanol, formaldehyde and alkenes has long been an open challenge for catalysis community. The main challenge is selectivity: if a catalytic material interacts strongly with methane, sufficient to break one C-H bond, it breaks all other bonds of the derivative molecules, as well. This leads to over-oxidization to CO2. Here using density functional theory (DFT) modelings, we discuss the possibility of using defective (vacancy rich) 2-d materials e.g., MoS2 to effectively trap single transition metal atoms; thereby, creating a single-site chemistry to enhance the selectivity of methane oxidation process. A single-site chemistry leads to competition between intermediates and products for limited active sites. Our strategy is to use this as an effective means to block unwanted reaction pathways leading to over-oxidization. United States department of energy.

  5. Intramolecular electron transfer in single-site-mutated azurins

    DEFF Research Database (Denmark)

    Farver, O; Skov, L K; Pascher, T

    1993-01-01

    . Natl. Acad. Sci. U.S.A. 86, 6968-6972]. The RSSR- radical produced in the above reaction was reoxidized in a slower intramolecular electron-transfer process (30-70 s-1 at 298 K) concomitant with a further reduction of the Cu(II) ion. The temperature dependence of the latter rates was determined...... and used to derive information on the possible effects of the mutations. The substitution of residue Phe114, situated on the opposite side of Cu relative to the disulfide, by Ala resulted in a rate increase by a factor of almost 2. By assuming that this effect is only due to an increase in driving force......Single-site mutants of the blue, single-copper protein, azurin, from Pseudomonas aeruginosa were reduced by CO2- radicals in pulse radiolysis experiments. The single disulfide group was reduced directly by CO2- with rates similar to those of the native protein [Farver, O., & Pecht, I. (1989) Proc...

  6. Asymmetric Volcano Trend in Oxygen Reduction Activity of Pt and Non-Pt Catalysts: In Situ Identification of the Site-Blocking Effect.

    Science.gov (United States)

    Li, Jingkun; Alsudairi, Amell; Ma, Zi-Feng; Mukerjee, Sanjeev; Jia, Qingying

    2017-02-01

    Proper understanding of the major limitations of current catalysts for oxygen reduction reaction (ORR) is essential for further advancement. Herein by studying representative Pt and non-Pt ORR catalysts with a wide range of redox potential (E redox ) via combined electrochemical, theoretical, and in situ spectroscopic methods, we demonstrate that the role of the site-blocking effect in limiting the ORR varies drastically depending on the E redox of active sites; and the intrinsic activity of active sites with low E redox have been markedly underestimated owing to the overlook of this effect. Accordingly, we establish a general asymmetric volcano trend in the ORR activity: the ORR of the catalysts on the overly high E redox side of the volcano is limited by the intrinsic activity; whereas the ORR of the catalysts on the low E redox side is limited by either the site-blocking effect and/or intrinsic activity depending on the E redox .

  7. Hanford Site Welding Program Successfully Providing A Single Site Function For Use By Multiple Contractors

    International Nuclear Information System (INIS)

    Cannell, G.R.

    2009-01-01

    The Department of Energy, Richland Operations (DOE-RL) recently restructured its Hanford work scope, awarding two new contracts over the past several months for a total of three contracts to manage the sites cleanup efforts. DOE-RL met with key contractor personnel prior to and during contract transition to ensure site welding activities had appropriate oversight and maintained code compliance. The transition also provided an opportunity to establish a single site-wide function that would provide welding and materials engineering services to the Hanford site contractors: CH2M HILL Plateau Remediation Company (CHPRC); Mission Support Alliance (MSA); Washington River Protection Solutions (WRPS); and Washington Closure Hanford (WCH). Over the years, multiple and separate welding programs (amongst the several contractors) existed at the Hanford site leading to inefficiencies resulting from duplication of administrative efforts, maintenance of welding procedures, welder performance certifications, etc. The new, single program eliminates these inefficiencies. The new program, co-managed by two of the sites' new contractors, the CHPRC ('owner' of the program and responsible for construction welding services) and the MSA (provides maintenance welding services), provides more than just the traditional construction and maintenance welding services. Also provided, are welding engineering, specialty welding development/qualification for the closure of radioactive materials containers and materials evaluation/failure analysis. The following describes the new Hanford site welding program.

  8. Transformation of Active Sites in Fe/SSZ-13 SCR Catalysts during Hydrothermal Aging: A Spectroscopic, Microscopic, and Kinetics Study

    Energy Technology Data Exchange (ETDEWEB)

    Kovarik, Libor; Washton, Nancy M.; Kukkadapu, Ravi K.; Devaraj, Arun; Wang, Aiyong; Wang, Yilin; Szanyi, Janos; Peden, Charles HF; Gao, Feng

    2017-03-07

    Fe/SSZ-13 catalysts (Si/Al = 12, Fe loadings 0.37% and 1.20%) were prepared via solution ion-exchange, and hydrothermally aged at 600, 700 and 800 C. The fresh and aged catalysts were characterized with surface area/pore volume analysis, Mössbauer, solid-state MAS NMR, NO titration FTIR spectroscopies, and TEM and APT imaging. Hydrothermal aging causes dealumination of the catalysts, and transformation of various Fe sites. The latter include conversion of free Fe2+ ions to dimeric Fe(III) species, the agglomeration of isolated Fe-ions to Fe-oxide clusters, and incorporation of Al into the Fe-oxide species. These changes result in complex influences on standard SCR and NO/NH3 oxidation reactions. In brief, mild aging causes catalyst performance enhancement for SCR, while harsh aging at 800 C deteriorates SCR performance. In comparison to Fe/zeolites more prone to hydrothermal degradation, this study demonstrates that via the utilization of highly hydrothermally stable Fe/SSZ-13 catalysts, more accurate correlations between various Fe species and their roles in SCR related chemistries can be made. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Office for the support of this work. The research described in this paper was performed in the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

  9. A Single-step Process to Convert Karanja Oil to Fatty Acid Methyl Esters Using Amberlyst15 as a Catalyst

    Directory of Open Access Journals (Sweden)

    Arun K. Gupta

    2018-03-01

    Full Text Available Karanja oil was successfully converted to fatty acid methyl esters (FAME in a single- step process using Amberlyst15 as a catalyst. A methanol to oil ratio of 6 was required to retain the physical structure of the Amberlyst15 catalyst. At higher methanol to oil ratios, the Amberlyst15 catalyst disintegrated. Disintegration of Amberlyst15 caused an irreversible loss in catalytic activity. This loss in activity was due to a decrease in surface area of Amberlyst15, which was caused by a decrease in its mesoporous volume. It appeared that the chemical nature of Amberlyst15 was unaffected. Reuse of Amberlyst15 with a methanol to oil ratio of 6:1 also revealed a loss in FAME yield. However, this loss in activity was recovered by heating the used Amberlyst15 catalyst to 393 K. The kinetic parameters of a power law model were successfully determined for a methanol to oil ratio of 6:1. An activation energy of 54.9 kJ mol–1 was obtained.

  10. Tunable, Chemo- and Site-Selective Nitrene Transfer Reactions through the Rational Design of Silver(I) Catalysts.

    Science.gov (United States)

    Alderson, Juliet M; Corbin, Joshua R; Schomaker, Jennifer M

    2017-09-19

    Carbon-nitrogen (C-N) bonds are ubiquitous in pharmaceuticals, agrochemicals, diverse bioactive natural products, and ligands for transition metal catalysts. An effective strategy for introducing a new C-N bond into a molecule is through transition metal-catalyzed nitrene transfer chemistry. In these reactions, a metal-supported nitrene can either add across a C═C bond to form an aziridine or insert into a C-H bond to furnish the corresponding amine. Typical catalysts for nitrene transfer include Rh 2 L n and Ru 2 L n complexes supported by bridging carboxylate and related ligands, as well as complexes based on Cu, Co, Ir, Fe, and Mn supported by porphyrins and related ligands. A limitation of metal-catalyzed nitrene transfer is the ability to predictably select which specific site will undergo amination in the presence of multiple reactive groups; thus, many reactions rely primarily on substrate control. Achieving true catalyst-control over nitrene transfer would open up exciting possibilities for flexible installation of new C-N bonds into hydrocarbons, natural product-inspired scaffolds, existing pharmaceuticals or biorenewable building blocks. Silver-catalyzed nitrene transfer enables flexible control over the position at which a new C-N bond is introduced. Ag(I) supported by simple N-donor ligands accommodates a diverse range of coordination geometries, from linear to tetrahedral to seesaw, enabling the electronic and steric parameters of the catalyst to be tuned independently. In addition, the ligand, Ag salt counteranion, Ag/ligand ratio and the solvent all influence the fluxional and dynamic behavior of Ag(I) complexes in solution. Understanding the interplay of these parameters to manipulate the behavior of Ag-nitrenes in a predictable manner is a key design feature of our work. In this Account, we describe successful applications of a variety of design principles to tunable, Ag-catalyzed aminations, including (1) changing Ag/ligand ratios to influence

  11. Oxygen reduction and evolution at single-metal active sites

    DEFF Research Database (Denmark)

    Calle-Vallejo, F.; Martínez, J.I.; García Lastra, Juan Maria

    2013-01-01

    overpotentials and is made of precious materials. A possible solution is the use of non-noble electrocatalysts with single-metal active sites. Here, on the basis of DFT calculations of adsorbed intermediates and a thermodynamic analysis, we compare the oxygen reduction (ORR) and evolution (OER) activities...... of functionalized graphitic materials and gas-phase porphyrins with late transition metals. We find that both kinds of materials follow approximately the same activity trends, and active sites with transition metals from groups 7 to 9 may be good ORR and OER electrocatalysts. However, spin analyses show more...... flexibility in the possible oxidation states of the metal atoms in solid electrocatalysts, while in porphyrins they must be +2. These observations reveal that the catalytic activity of these materials is mainly due to nearest-neighbor interactions. Based on this, we propose that this class of electrocatalysts...

  12. Laparoendoscopic single-site cholecystectomy in a pregnant patient

    Directory of Open Access Journals (Sweden)

    Ramya Ranjan Behera

    2013-01-01

    Full Text Available Feasibility and safety of laparoscopic cholecystectomy during pregnancy for patients with symptomatic or complicated gallstone disease is well established. Laparoendoscopic single-site cholecystectomy (LESS-chole is a new modality in which the entire surgery is undertaken via a transumbilical incision. We describe a 33-year-old patient who underwent a LESS-chole in the 20 th week of pregnancy for gallstone disease complicated by episodes of obstructive jaundice and acute pancreatitis. This is the first reported case of LESS-chole performed using conventional laparoscopic instruments. The technical aspects as well as the various perioperative measures utilized to undertake this procedure safely are outlined.

  13. Role of Tricoordinate Al Sites in CH3ReO3/Al2O3 Olefin Metathesis Catalysts.

    Science.gov (United States)

    Valla, Maxence; Wischert, Raphael; Comas-Vives, Aleix; Conley, Matthew P; Verel, René; Copéret, Christophe; Sautet, Philippe

    2016-06-01

    Re2O7 supported on γ-alumina is an alkene metathesis catalyst active at room temperature, compatible with functional groups, but the exact structures of the active sites are unknown. Using CH3ReO3/Al2O3 as a model for Re2O7/Al2O3, we show through a combination of reactivity studies, in situ solid-state NMR, and an extensive series of DFT calculations, that μ-methylene structures (Al-CH2-ReO3-Al) containing a Re═O bound to a tricoordinated Al (AlIII) and CH2 bound to a four-coordinated Al (AlIVb) are the precursors of the most active sites for olefin metathesis. The resting state of CH3ReO3/Al2O3 is a distribution of μ-methylene species formed by the activation of the C-H bond of CH3ReO3 on different surface Al-O sites. In situ reaction with ethylene results in the formation of Re metallacycle intermediates, which were studied in detail through a combination of solid-state NMR experiments, using labeled ethylene, and DFT calculations. In particular, we were able to distinguish between metallacycles in TBP (trigonal-bipyramidal) and SP (square-pyramidal) geometry, the latter being inactive and detrimental to catalytic activity. The SP sites are more likely to be formed on other Al sites (AlIVa/AlIVa). Experimentally, the activity of CH3ReO3/Al2O3 depends on the activation temperature of alumina; catalysts activated at or above 500 °C contain more active sites than those activated at 300 °C. We show that the dependence of catalytic activity on the Al2O3 activation temperature is related to the quantity of available AlIII-defect sites and adsorbed H2O.

  14. Conversion of Methane into Methanol and Ethanol over Nickel Oxide on Ceria-Zirconia Catalysts in a Single Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Okolie, Chukwuemeka [School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW Atlanta GA 30332 USA; Belhseine, Yasmeen F. [School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW Atlanta GA 30332 USA; Lyu, Yimeng [School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW Atlanta GA 30332 USA; Yung, Matthew M. [National Renewable Energy Laboratory, Golden CO 80401 USA; Engelhard, Mark H. [Environmental Molecular Sciences Laboratory, Pacific Northwest National Lab, Richland WA 99354 USA; Kovarik, Libor [Environmental Molecular Sciences Laboratory, Pacific Northwest National Lab, Richland WA 99354 USA; Stavitski, Eli [National Synchrotron Light Source II, Brookhaven National Laboratory, Upton NY 11973 USA; Sievers, Carsten [School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW Atlanta GA 30332 USA

    2017-09-26

    Direct conversion of methane into alcohols is a promising technology for converting stranded methane reserves into liquids that can be transported in pipelines and upgraded to value-added chemicals. We demonstrate that a catalyst consisting of small nickel oxide clusters supported on ceria-zirconia (NiO/CZ) can selectively oxidize methane to methanol and ethanol in a single, steady-state process at 723 K using O2 as an abundantly available oxidant. The presence of steam is required to obtain alcohols rather than CO2 as the product of catalytic combustion. The unusual activity of this catalyst is attributed to the synergy between the small Lewis acidic NiO clusters and the redox-active CZ support, which also stabilizes the small NiO clusters.

  15. Synthesis of Single-Walled Carbon Nanotubes: Effects of Active Metals, Catalyst Supports, and Metal Loading Percentage

    Directory of Open Access Journals (Sweden)

    Wei-Wen Liu

    2013-01-01

    Full Text Available The effects of active metals, catalyst supports, and metal loading percentage on the formation of single-walled carbon nanotubes (SWNTs were studied. In particular, iron, cobalt, and nickel were investigated for SWNTs synthesis. Iron was found to grow better-quality SWNTs compared to cobalt and nickel. To study the effect of catalyst supports, magnesium oxide, silicon oxide, and aluminium oxide were chosen for iron. Among the studied supports, MgO was identified to be a suitable support for iron as it produced SWNTs with better graphitisation determined by Raman analysis. Increasing the iron loading decreased the quality of SWNTs due to extensive agglomeration of the iron particles. Thus, lower metal loading percentage is preferred to grow better-quality SWNTs with uniform diameters.

  16. Cationic Silica-Supported N-Heterocyclic Carbene Tungsten Oxo Alkylidene Sites: Highly Active and Stable Catalysts for Olefin Metathesis.

    Science.gov (United States)

    Pucino, Margherita; Mougel, Victor; Schowner, Roman; Fedorov, Alexey; Buchmeiser, Michael R; Copéret, Christophe

    2016-03-18

    Designing supported alkene metathesis catalysts with high activity and stability is still a challenge, despite significant advances in the last years. Described herein is the combination of strong σ-donating N-heterocyclic carbene ligands with weak σ-donating surface silanolates and cationic tungsten sites leading to highly active and stable alkene metathesis catalysts. These well-defined silica-supported catalysts, [(≡SiO)W(=O)(=CHCMe2 Ph)(IMes)(OTf)] and [(≡SiO)W(=O)(=CHCMe2 Ph)(IMes)(+) ][B(Ar(F) )4 (-) ] [IMes=1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene, B(Ar(F) )4 =B(3,5-(CF3 )2 C6 H3 )4 ] catalyze alkene metathesis, and the cationic species display unprecedented activity for a broad range of substrates, especially for terminal olefins with turnover numbers above 1.2 million for propene. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Advances in X-ray Chemical Imaging of a Single Catalyst Particle

    NARCIS (Netherlands)

    Kalirai, S.

    2016-01-01

    Fluid Catalytic Cracking (FCC) catalyst particles are complex, hierarchical, multi-component systems that are used ubiquitously for the production of valuable hydrocarbons such as gasoline and propylene from crude oil feedstocks. In the FCC unit, high heat, steam and feedstocks contaminated with

  18. Single Pot Selective Hydrogenation of Furfural to 2-Methylfuran Over Carbon Supported Iridium Catalysts

    KAUST Repository

    Date, Nandan S

    2018-03-20

    Various iridium supported carbon catalysts were prepared and screened for direct hydrogenation of furfural (FFR) to 2-methyl furan (2-MF). Amongest these, 5% Ir/C showed excellent results with complete FFR conversion and highest selectivity of 95% to 2-MF at very low H2 pressure of 100 psig. Metallic (Iro) and oxide ( IrO2) phases of Ir catalyzed first step hydrogenation involving FFR to FAL and subsequent hydrogenation to 2-MF,respecively. This was confirmed by XPS analysis and some controlled experiments. At low temperature of 140 oC, almost equal selectivities of FAL (42%) and 2-MF (43%) were observed, while higher temperature (220oC) favored selective hydrodeoxygenation. At optimized temperature, 2-MF formed selectively while higher pressure and higher catalyst loading favored ring hydrogenation of furfural rather than side chain hydrogenation. With combination of several control experimental results and detailed catalyst characterization, a plausible reaction pathway has been proposed for selective formation of 2-MF. The selectivity to various other products in FFR hydrogenation can be manipulated by tailoring the reaction conditions over the same catalyst.

  19. Stability investigation of a high number density Pt1/Fe2O3single-atom catalyst under different gas environments by HAADF-STEM.

    Science.gov (United States)

    Duan, Sibin; Wang, Rongming; Liu, Jingyue

    2018-05-18

    Catalysis by supported single metal atoms has demonstrated tremendous potential for practical applications due to their unique catalytic properties. Unless they are strongly anchored to the support surfaces, supported single atoms, however, are thermodynamically unstable, which poses a major obstacle for broad applications of single-atom catalysts (SACs). In order to develop strategies to improve the stability of SACs, we need to understand the intrinsic nature of the sintering processes of supported single metal atoms, especially under various gas environments that are relevant to important catalytic reactions. We report on the synthesis of high number density Pt 1 /Fe 2 O 3 SACs using a facial strong adsorption method and the study of the mobility of these supported Pt single atoms at 250 °C under various gas environments that are relevant to CO oxidation, water-gas shift, and hydrogenation reactions. Under the oxidative gas environment, Fe 2 O 3 supported Pt single atoms are stable even at high temperatures. The presence of either CO or H 2 molecules in the gas environment, however, facilitates the movement of the Pt atoms. The strong interaction between CO and Pt weakens the binding between the Pt atoms and the support, facilitating the movement of the Pt single atoms. The dissociation of H 2 molecules on the Pt atoms and their subsequent interaction with the oxygen species of the support surfaces dislodge the surface oxygen anchored Pt atoms, resulting in the formation of Pt clusters. The addition of H 2 O molecules to the CO or H 2 significantly accelerates the sintering of the Fe 2 O 3 supported Pt single atoms. An anchoring-site determined sintering mechanism is further proposed, which is related to the metal-support interaction.

  20. Wegner Estimates for Sign-Changing Single Site Potentials

    Science.gov (United States)

    Veselić, Ivan

    2010-12-01

    We study Anderson and alloy-type random Schrödinger operators on ℓ2(ℤ d ) and L 2(ℝ d ). Wegner estimates are bounds on the average number of eigenvalues in an energy interval of finite box restrictions of these types of operators. For a certain class of models we prove a Wegner estimate which is linear in the volume of the box and the length of the considered energy interval. The single site potential of the Anderson/alloy-type model does not need to have fixed sign, but it needs be of a generalised step function form. The result implies the Lipschitz continuity of the integrated density of states.

  1. Single transition metal atom embedded into a MoS2nanosheet as a promising catalyst for electrochemical ammonia synthesis.

    Science.gov (United States)

    Zhao, Jia; Zhao, Jingxiang; Cai, Qinghai

    2018-03-21

    The electrochemical reduction of N2 to NH3 (NRR) under ambient conditions is significant for sustainable agriculture. Here, by means of density functional theory (DFT) computations, the potential of a series of single transition metal (TM) atoms embedded into a MoS2 monolayer with an S-vacancy (TM/MoS2) as electrocatalysts for NRR was systematically investigated. Our DFT results revealed that among all these considered candidate catalysts, the single Mo atom embedded into the MoS2 nanosheet was found to be the most active catalyst for NRR with an onset potential of -0.53 V, in which the hydrogenation of the adsorbed N2* to N2H* is the potential-determining step. The high stabilization of the N2H* species is responsible for the superior performance of the embedded Mo atom for the NRR, which is well consistent with its d-band center. Our findings may facilitate the further design of single-atom electrocatalysts with high efficiency for NH3 synthesis at room temperature.

  2. Controlling Structural Characteristics of Single-Walled Carbon Nanotubes (SWNT) by Tailoring Catalyst Composition and Synthesis Conditions

    International Nuclear Information System (INIS)

    Resasco, Daniel E.

    2010-01-01

    This report shows the extensive research on the mechanism responsible for the formation of single walled carbon nanotubes in order to get control over their structural parameters (diameter and chirality). Catalyst formulations, pre-treatment conditions, and reaction conditions are described in detail as well as mechanisms to produce nanotubes structures of specific arrays (vertical forest, nanotube pillars). Applications of SWNT in different fields are also described in this report. In relation to this project five students have graduated (3 PhD and 2 MS) and 35 papers have been published.

  3. Novel Anodic Catalyst Support for Direct Methanol Fuel Cell: Characterizations and Single-Cell Performances.

    Science.gov (United States)

    Abdullah, N; Kamarudin, S K; Shyuan, L K

    2018-04-03

    This study introduces a novel titanium dioxide carbon nanofiber (TiO 2 -CNF) support for anodic catalyst in direct methanol fuel cell. The catalytic synthesis process involves several methods, namely the sol-gel, electrospinning, and deposition methods. The synthesized electrocatalyst is compared with other three electrocatalysts with different types of support. All of these electrocatalysts differ based on a number of physical and electrochemical characteristics. Experimental results show that the TiO 2 -CNF support gave the highest current density at 345.64 mA mg catalyst -1 , which is equivalent to 5.54-fold that of carbon support while the power density is almost double that of the commercial electrocatalyst.

  4. Selective Growth of Single-, Double-, and Triple-Walled Carbon Nanotubes through Precise Control of Catalyst Diameter by Radiation-Heated Chemical Vapor Deposition

    Science.gov (United States)

    Taki, Yusuke; Shinohara, Kiyoaki; Kikuchi, Makiko; Tanaka, Akira

    2008-01-01

    Radiation-heated chemical vapor deposition (RHCVD) is a newly developed process which enables the maintenance of narrow catalyst diameter distributions until carbon nanotubes (CNTs) start growing and the synthesis of single-walled carbon nanotube (SWCNT), double-walled carbon nanotube (DWCNT), and triple-walled carbon nanotube (TWCNT) films by changing catalyst diameters. The proportions of specific walled CNTs/as-grown CNTs are as follows: SWCNT/CNT ratio of 100%, DWCNT/CNT ratio of 88% and TWCNT/CNT ratio of 76%. It is clarified that CNT diameter and the number of graphene walls of CNTs are proportional to catalyst diameter.

  5. Laparoendoscopic single-site adnexal surgery: Preliminary Indian experience

    Directory of Open Access Journals (Sweden)

    Smitha Balusamy

    2017-01-01

    Full Text Available Introduction: Laparoendoscopic single-site surgery (LESS is an emerging technique in gynaecology. The proposed advantages of the LESS include better cosmesis and reduction in pain. We report our preliminary experience with LESS in the treatment of adnexal pathology. Materials and Methods: After a preoperative workup, LESS was offered to 37 patients between July 2009 and April 2015. All the procedures were carried out through a 2–2.5 cm transumbilical incision using conventional laparoscopic instruments. A single-incision, multiport (SIMP approach (utilising one 7 mm and two 5 mm ports was used in 27 patients and a homemade glove port (HMGP was utilised in ten patients. All the specimens were extracted after placement in a plastic bag or inside the glove port avoiding contact with the wound. Umbilical fascial incisions were meticulously closed with non-absorbable sutures. Results: Two patients with a history of previous abdominal surgery required omental adhesiolysis. Seventeen patients with breast cancer underwent bilateral salpingo-oophorectomy, ten had ovarian cystectomy (6 had cystadenoma, 2 had endometriotic cysts and 2 had dermoid cyst, six had excision of paraovarian cysts (one along with partial salpingectomy and four with ruptured ectopic pregnancy underwent salpingectomy. LESS was completed in all but one patient, who required insertion of an additional 5 mm port. There were no intra- or post-operative complications. Conclusions: Our experience confirms the feasibility and safety of LESS in a variety of benign adnexal pathology. Both the SIMP and HMGP approaches seem comparable. Performing LESS without the use of specialised access ports or instruments makes it cost effective and suitable for wider application.

  6. Magnetic properties of iron catalyst particles in HiPco single wall carbon nanotubes

    Czech Academy of Sciences Publication Activity Database

    Bittová, Barbara; Poltierová Vejpravová, Jana; Kalbáč, Martin; Burianová, Simona; Mantlíková, A.; Daniš, S.; Doyle, S.

    2011-01-01

    Roč. 115, č. 35 (2011), s. 17303-17309 ISSN 1932-7447 R&D Projects: GA ČR GAP204/10/1677 Institutional research plan: CEZ:AV0Z10100520; CEZ:AV0Z40400503 Keywords : metal catalyst particles * carbon nanotubes * superparamagnet * core - shell model * inter-particle interactions Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 4.805, year: 2011 http://pubs.acs.org/doi/abs/10.1021/jp203365g

  7. Single-Atom Mn Active Site in a Triol-Stabilized β-Anderson Manganohexamolybdate for Enhanced Catalytic Activity towards Adipic Acid Production

    Directory of Open Access Journals (Sweden)

    Jianhui Luo

    2018-03-01

    Full Text Available Adipic acid is an important raw chemical for the commercial production of polyamides and polyesters. The traditional industrial adipic acid production utilizes nitric acid to oxidize KA oil (mixtures of cyclohexanone and cyclohexanol, leading to the emission of N2O and thus causing ozone depletion, global warming, and acid rain. Herein, we reported an organically functionalized β-isomer of Anderson polyoxometalates (POMs nanocluster with single-atom Mn, β-{[H3NC(CH2O3]2MnMo6O18}− (1, as a highly active catalyst to selectively catalyze the oxidation of cyclohexanone, cyclohexanol, or KA oil with atom economy use of 30% H2O2 for the eco-friendly synthesis of adipic acid. The catalyst has been characterized by single crystal and powder XRD, XPS, ESI-MS, FT-IR, and NMR. A cyclohexanone (cyclohexanol conversion of >99.9% with an adipic acid selectivity of ~97.1% (~85.3% could be achieved over catalyst 1 with high turnover frequency of 2427.5 h−1 (2132.5 h−1. It has been demonstrated that the existence of Mn3+ atom active site in catalyst 1 and the special butterfly-shaped topology of POMs both play vital roles in the enhancement of catalytic activity.

  8. Support effects in single atom iron catalysts on adsorption characteristics of toxic gases (NO2, NH3, SO3 and H2S)

    Science.gov (United States)

    Gao, Zhengyang; Yang, Weijie; Ding, Xunlei; Lv, Gang; Yan, Weiping

    2018-04-01

    The effects of support on gas adsorption is crucial for single atom catalysts design and optimization. To gain insight into support effects on gas adsorption characteristics, a comprehensive theoretical study was performed to investigate the adsorption characteristics of toxic gases (NO2, NH3, SO3 and H2S) by utilizing single atom iron catalysts with three graphene-based supports. The adsorption geometry, adsorption energy, electronic and magnetic properties of the adsorption system have been explored. Additionally, the support effects have been analyzed through d-band center and Fermi softness, and thermodynamic analysis has been performed to consider the effect of temperature on gas adsorption. The support effects have a remarkable influence on the adsorption characteristics of four types of toxic gases which is determined by the electronic structure of graphene-based support, and the electronic structure can be characterized by Fermi softness of catalysts. Fermi softness and uplift height of Fe atom could be good descriptors for the adsorption activity of single atom iron catalysts with graphene-based supports. The findings can lay a foundation for the further study of graphene-based support effects in single atom catalysts and provide a guideline for development and design of new graphene-based support materials utilizing the idea of Fermi softness.

  9. Comparative study of activated carbon, natural zeolite, and green sand supports for CuOX and ZnO sites as ozone decomposition catalyst

    Science.gov (United States)

    Azhariyah, A. S.; Pradyasti, A.; Dianty, A. G.; Bismo, S.

    2018-03-01

    This research was based on ozone decomposition in industrial environment. Ozone is harmful to human. Therefore, catalysts were made as a mask filter to decompose ozone. Comparison studies of catalyst supports were done using Granular Activated Carbon (GAC), Natural Zeolite (NZ), and Green Sand (GS). GAC showed the highest catalytic activity compared to other supports with conversion of 98%. Meanwhile, the conversion using NZ was only 77% and GS had been just 27%. GAC had the highest catalytic activity because it had the largest pore volume, which is 0.478 cm3/g. So GAC was used as catalyst supports. To have a higher conversion in ozone decomposition, GAC was impregnated with metal oxide as the active site of the catalyst. Active site comparison was made using CuOX and ZnO as the active site. Morphology, composition, and crystal phase were analyzed using SEM-EDX, XRF, and XRD methods. Mask filter, which contained catalysts for ozone decomposition, was tested using a fixed bed reactor at room temperature and atmospheric pressure. The result of conversion was analyzed using iodometric method. CuOX/GAC and ZnO/GAC 2%-w showed the highest catalytic activity and conversion reached 100%. From the durability test, CuOX/GAC 2%-w was better than ZnO/GAC 2%-w because the conversion of ozone to oxygen reached 100% with the lowest conversion was 70% for over eight hours.

  10. Port site infiltration of local anesthetic after laparoendoscopic single site surgery for benign adnexal disease.

    Science.gov (United States)

    Kim, Jung Eun; Shim, Seung-Hyuk; Dong, Meari; Lee, Hyojin; Hwang, Han Sung; Kwon, Han Sung; Lee, Sun Joo; Lee, Ji Young; Sohn, In Sook; Kim, Soo-Nyung; Kang, Soon-Beom

    2017-09-01

    To determine whether local bupivacaine injection into the incision site after gynecologic laparoendoscopic single site surgery (LESS) improves postoperative pain. This prospective cohort study included consecutive 158 patients who had LESS for benign adnexal disease from March 2013 to December 2015. Chronologically, 82 patients (March 2013 to August 2014) received no bupivacaine (group 1) and 76 (August 2014 to December 2015) received a bupivacaine block (group 2). For group 2, 10 mL 0.25% bupivacaine was injected into the 20 mm-incision site through all preperitoneal layers after LESS completion. Primary outcome is postoperative pain score using the visual analog scale (VAS). There was no difference in clinicopathological characteristics between the groups. Operating time (expressed as median [range], 92 [55-222] vs. 100 [50-185] minutes, P =0.137) and estimated blood loss (50 [30-1,500] vs. 125 [30-1,000] mL, P =0.482) were similar between the groups. Post-surgical VAS pain scores after 3 hours (3.5 [2-6] vs. 3.5 [2-5], P =0.478), 6 to 8 hours (3.5 [2-6] vs. 3 [1-8], P =0.478), and 16 to 24 hours (3 [2-4] vs. 3 [1-7], P =0.664) did not differ between groups. Bupivacaine injection into the trocar site did not improve postoperative pain after LESS. Randomized trials are needed to evaluate the benefits of local bupivacaine anesthetic for postoperative pain reduction.

  11. Single-site robotic surgery in gynecologic cancer: a pilot study

    OpenAIRE

    Yoo, Ha-Na; Kim, Tae-Joong; Lee, Yoo-Young; Choi, Chel Hun; Lee, Jeong-Won; Bae, Duk-Soo; Kim, Byoung-Gie

    2015-01-01

    Objective To discuss the feasibility of single-site robotic surgery for benign gynecologic tumors and early stage gynecologic cancers. Methods In this single institution, prospective analysis, we analyzed six patients who had undergone single-site robotic surgery between December 2013 and August 2014. Surgery was performed using the da Vinci Si Surgical System. Patient characteristics and surgical outcomes were analyzed. Results Single-site robotic surgery was performed successfully in all si...

  12. Active Iron Sites of Disordered Mesoporous Silica Catalyst FeKIL-2 in the Oxidation of Volatile Organic Compounds (VOC

    Directory of Open Access Journals (Sweden)

    Mojca Rangus

    2014-05-01

    Full Text Available Iron-functionalized disordered mesoporous silica (FeKIL-2 is a promising, environmentally friendly, cost-effective and highly efficient catalyst for the elimination of volatile organic compounds (VOCs from polluted air via catalytic oxidation. In this study, we investigated the type of catalytically active iron sites for different iron concentrations in FeKIL-2 catalysts using advanced characterization of the local environment of iron atoms by a combination of X-ray Absorption Spectroscopy Techniques (XANES, EXAFS and Atomic-Resolution Scanning Transmission Electron Microscopy (AR STEM. We found that the molar ratio Fe/Si ≤ 0.01 leads to the formation of stable, mostly isolated Fe3+ sites in the silica matrix, while higher iron content Fe/Si > 0.01 leads to the formation of oligonuclear iron clusters. STEM imaging and EELS techniques confirmed the existence of these clusters. Their size ranges from one to a few nanometers, and they are unevenly distributed throughout the material. The size of the clusters was also found to be similar, regardless of the nominal concentration of iron (Fe/Si = 0.02 and Fe/Si = 0.05. From the results obtained from sample characterization and model catalytic tests, we established that the enhanced activity of FeKIL-2 with the optimal Fe/Si = 0.01 ratio can be attributed to: (1 the optimal concentration of stable isolated Fe3+ in the silica support; and (2 accelerated diffusion of the reactants in disordered mesoporous silica (FeKIL-2 when compared to ordered mesoporous silica materials (FeSBA-15, FeMCM-41.

  13. Oxidative conversion of propane over lithium-promoted magnesia catalyst. II. Active site characterization and hydrocarbon activation

    NARCIS (Netherlands)

    Leveles, L.; Seshan, Kulathuiyer; Lercher, J.A.; Lefferts, Leonardus

    2003-01-01

    Activation of propane over Li/MgO catalyst has been investigated. It is shown that a small fraction of the oxygen ions in Li/MgO catalysts can be removed from the catalyst by reduction treatment in H2 at 600 °C. Catalytic activity of Li/MgO exhibits a strong correlation to the amount of oxygen that

  14. Screening single-atom catalysts for methane activation: α -A l2O3(0001 ) -supported Ni

    Science.gov (United States)

    Gao, Fei; Gao, Shiwu; Meng, Sheng

    2017-08-01

    Methane activation is one of the biggest challenges for chemical conversion of hydrocarbons and fundamental science. We systematically screen d -block transition metal elements as potential candidates of single-atom catalysts (SACs) for methane dissociation. The adsorption of methane on free metal atoms strongly depends on the number of d electrons of SAC, where the maximum binding energy is formed with the Ni group (electronic configuration d8s2 or d9s1 ). Interestingly, the magnetic moment of the SACs decreases by 2 μB for strong interactions, suggesting that the methane-metal bond forms a spin singlet state involving two electrons of opposite spins. To examine the effect of substrates, the screened transition metals, Ni, Rh, and Pt are further put onto prototype metal oxide surfaces. The substrate dramatically modifies the discrete energy levels of a single metal and its catalytic properties. Single Ni atoms supported on an O-terminated α -A l2O3(0001 ) surface (N i1/A l2O3 ) show superior catalytic properties, with a low activation barrier of 0.4 eV (0.11 eV after zero-point energy correction) for the C-H bond dissociation and simultaneously an extreme stability with a high binding energy of ˜9.39 eV for the Ni anchor. This work identifies N i1/A l2O3 catalyst as an optimal SAC and offers new atomistic insights into the mechanism of methane activation on SACs.

  15. Pt/Cu single-atom alloys as coke-resistant catalysts for efficient C-H activation

    Science.gov (United States)

    Marcinkowski, Matthew D.; Darby, Matthew T.; Liu, Jilei; Wimble, Joshua M.; Lucci, Felicia R.; Lee, Sungsik; Michaelides, Angelos; Flytzani-Stephanopoulos, Maria; Stamatakis, Michail; Sykes, E. Charles H.

    2018-03-01

    The recent availability of shale gas has led to a renewed interest in C-H bond activation as the first step towards the synthesis of fuels and fine chemicals. Heterogeneous catalysts based on Ni and Pt can perform this chemistry, but deactivate easily due to coke formation. Cu-based catalysts are not practical due to high C-H activation barriers, but their weaker binding to adsorbates offers resilience to coking. Using Pt/Cu single-atom alloys (SAAs), we examine C-H activation in a number of systems including methyl groups, methane and butane using a combination of simulations, surface science and catalysis studies. We find that Pt/Cu SAAs activate C-H bonds more efficiently than Cu, are stable for days under realistic operating conditions, and avoid the problem of coking typically encountered with Pt. Pt/Cu SAAs therefore offer a new approach to coke-resistant C-H activation chemistry, with the added economic benefit that the precious metal is diluted at the atomic limit.

  16. Pt/Cu single-atom alloys as coke-resistant catalysts for efficient C–H activation

    Energy Technology Data Exchange (ETDEWEB)

    Marcinkowski, Matthew D.; Darby, Matthew T.; Liu, Jilei; Wimble, Joshua M.; Lucci, Felicia R.; Lee, Sungsik; Michaelides, Angelos; Flytzani-Stephanopoulos, Maria; Stamatakis, Michail; Sykes, E. Charles H.

    2018-01-08

    The recent availability of shale gas has led to a renewed interest in C-H bond activation as the first step towards synthesis of fuels and fine chemicals. Heterogeneous catalysts based on Ni and Pt can perform this chemistry, but deactivate easily due to coke formation. Cu- based catalysts are not practical for this chemistry due to high C-H activation barriers, but their weaker binding to adsorbates offers resilience to coking. Utilizing Pt/Cu single atom alloys (SAAs) we examine C-H activation in a number of systems including methyl groups, methane, and butane using a combination of simulations, surface science, and catalysis studies. We find that Pt/Cu SAAs activate C-H bonds more efficiently than Cu, are stable for days under realistic operating conditions, and avoid the problem of coking typically encountered with Pt. Pt/Cu SAAs therefore offer a new approach to coke resistant C-H activation chemistry with the added economic benefit that the precious metal is diluted at the atomic limit.

  17. Well-defined silica supported aluminum hydride: another step towards the utopian single site dream?

    Science.gov (United States)

    Werghi, Baraa; Bendjeriou-Sedjerari, Anissa; Sofack-Kreutzer, Julien; Jedidi, Abdesslem; Abou-Hamad, Edy; Cavallo, Luigi; Basset, Jean-Marie

    2015-10-01

    processes occur by opening of a strained siloxane bridge, Si-O-Si but with two different mechanisms, showing that the reality of "single site" catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O-Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a β-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al-H bond and a O-Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10 -5 mbar) generates Al-H through a β-H elimination of isobutyl fragment. These supported well-defined Al-H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and 27 Al- 1 H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.

  18. Acetic acid, a relatively green single-use catalyst for hydrogen generation from sodium borohydride

    Energy Technology Data Exchange (ETDEWEB)

    Akdim, O.; Demirci, U.B.; Miele, P. [Universite Lyon 1, CNRS, UMR 5615, Laboratoire des Multimateriaux et Interfaces, 43 Boulevard du 11 Novembre 1918, F-69622 Villeurbanne (France)

    2009-09-15

    Acid-catalyzed hydrolysis of sodium borohydride (NaBH{sub 4}) has been studied (reactivity and kinetics) at high acid concentration (0.32 M). A mineral (hydrochloric acid, HCl) and an organic benign (acetic acid, CH{sub 3}COOH) acid have been chosen. Our study has three distinct objectives, namely: (i) combining the simplicity of the storage of solid NaBH{sub 4} with the simplicity of the aqueous solution of acid; (ii) showing CH{sub 3}COOH can be as reactive as HCl in specific well-chosen operating conditions; and (iii) emphasizing the relative greenness of the CH{sub 3}COOH-based process. All of these objectives have been fulfilled and show that CH{sub 3}COOH is a benign relatively green acid catalyst of choice for catalyzing hydrogen generation from NaBH{sub 4}, the acid-water-NaBH{sub 4} system being quite simple. (author)

  19. A DFT Mechanistic Study on Ethylene Tri- and Tetramerization with Cr/PNP Catalysts: Single versus Double Insertion Pathways.

    Science.gov (United States)

    Britovsek, George J P; McGuinness, David S

    2016-11-14

    The mechanism of ethylene trimerization and tetramerization with a chromium-diphosphinoamine (Cr-PNP) catalyst system has been studied by theoretical (DFT) methods. Two representative ligands have been explored, namely Ph 2 PN(Me)PPh 2 and (o-MeC 6 H 4 ) 2 PN(Me)P(o-MeC 6 H 4 ) 2 . Calculations on the former ligand reveal how a combination of single and double ethylene insertion mechanisms may lead to 1-hexene, 1-octene and the major side products (cyclopentanes and n-alkanes). For the latter ligand, introduction of o-alkyl substitution leads to a more sterically congested active species, which suppresses the available pathways for tetramerization and side product formation. Hence, the high selectivity of o-aryl substituted PNP ligands for trimerization can be rationalized. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Evolution of Active Sites in Pt-Based Nanoalloy Catalysts for the Oxidation of Carbonaceous Species by Combined in Situ Infrared Spectroscopy and Total X-ray Scattering.

    Science.gov (United States)

    Petkov, Valeri; Maswadeh, Yazan; Lu, Aolin; Shan, Shiyao; Kareem, Haval; Zhao, Yinguang; Luo, Jin; Zhong, Chuan-Jian; Beyer, Kevin; Chapman, Karena

    2018-03-23

    We present results from combined in situ infrared spectroscopy and total X-ray scattering studies on the evolution of catalytically active sites in exemplary binary and ternary Pt-based nanoalloys during a sequence of CO oxidation-reactivation-CO oxidation reactions. We find that when within a particular compositional range, the fresh nanoalloys may exhibit high catalytic activity for low-temperature CO oxidation. Using surface-specific atomic pair distribution functions (PDFs) extracted from the in situ total X-ray scattering data, we find that, regardless of their chemical composition and initial catalytic activity, the fresh nanoalloys suffer a significant surface structural disorder during CO oxidation. Upon reactivation in oxygen atmosphere, the surface of used nanoalloy catalysts both partially oxidizes and orders. Remarkably, it largely retains its structural state when the nanoalloys are reused as CO oxidation catalysts. The seemingly inverse structural changes of studied nanoalloy catalysts occurring under CO oxidation and reactivation conditions affect the active sites on their surface significantly. In particular, through different mechanisms, both appear to reduce the CO binding strength to the nanoalloy's surface and thus increase the catalytic stability of the nanoalloys. The findings provide clues for further optimization of nanoalloy catalysts for the oxidation of carbonaceous species through optimizing their composition, activation, and reactivation. Besides, the findings demonstrate the usefulness of combined in situ infrared spectroscopy and total X-ray scattering coupled to surface-specific atomic PDF analysis to the ongoing effort to produce advanced catalysts for environmentally and technologically important applications.

  1. A single iron site confined in a graphene matrix for the catalytic oxidation of benzene at room temperature.

    Science.gov (United States)

    Deng, Dehui; Chen, Xiaoqi; Yu, Liang; Wu, Xing; Liu, Qingfei; Liu, Yun; Yang, Huaixin; Tian, Huanfang; Hu, Yongfeng; Du, Peipei; Si, Rui; Wang, Junhu; Cui, Xiaoju; Li, Haobo; Xiao, Jianping; Xu, Tao; Deng, Jiao; Yang, Fan; Duchesne, Paul N; Zhang, Peng; Zhou, Jigang; Sun, Litao; Li, Jianqi; Pan, Xiulian; Bao, Xinhe

    2015-12-01

    Coordinatively unsaturated (CUS) iron sites are highly active in catalytic oxidation reactions; however, maintaining the CUS structure of iron during heterogeneous catalytic reactions is a great challenge. Here, we report a strategy to stabilize single-atom CUS iron sites by embedding highly dispersed FeN4 centers in the graphene matrix. The atomic structure of FeN4 centers in graphene was revealed for the first time by combining high-resolution transmission electron microscopy/high-angle annular dark-field scanning transmission electron microscopy with low-temperature scanning tunneling microscopy. These confined single-atom iron sites exhibit high performance in the direct catalytic oxidation of benzene to phenol at room temperature, with a conversion of 23.4% and a yield of 18.7%, and can even proceed efficiently at 0°C with a phenol yield of 8.3% after 24 hours. Both experimental measurements and density functional theory calculations indicate that the formation of the Fe═O intermediate structure is a key step to promoting the conversion of benzene to phenol. These findings could pave the way toward highly efficient nonprecious catalysts for low-temperature oxidation reactions in heterogeneous catalysis and electrocatalysis.

  2. Induction of prophage lambda by chlorinated organics: Detection of some single-species/single-site carcinogens

    Energy Technology Data Exchange (ETDEWEB)

    DeMarini, D.M.; Brooks, H.G. (Environmental Protection Agency, Research Triangle Park, NC (United States))

    1992-01-01

    Twenty-eight chlorinated organic compounds were evaluated for their ability to induce DNA damage using the Microscreen prophage-induction assay in Escherichia coli. Comparison of the performance characteristics of the prophage-induction and Salmonella assays to rodent carcinogenicity assays showed that the prophage-induction assay had a somewhat higher specificity than did the Salmonella assay (70% vs. 50%); sensitivity, concordance, and positive and negative predictivity were similar for the two microbial assays. The Microscreen prophage-induction assay failed to detect eight carcinogens, perhaps due to toxicity or other unknown factors; five of these eight carcinogens were detected by the Salmonella assay. However, the prophage-induction assay did detect six carcinogens that were not detected by the Salmonella assay, and five of these were single-species, single-site carcinogens, mostly mouse liver carcinogens. Some of these carcinogens, such as the chloroethanes, produce free radicals, which may be the basis for their carcinogenicity and ability to induce prophage. The prophage-induction (or other SOS) assay may be useful in identifying some genotoxic chlorinated carcinogens that induce DNA damage that do not revert the standard Salmonella tester strains.

  3. Probing the crossover in CO desorption from single crystal to nanoparticulate Ru model catalysts

    DEFF Research Database (Denmark)

    Murphy, Shane; Strebel, Christian Ejersbo; Vendelbo, Søren Bastholm

    2011-01-01

    Crossover in CO desorption behavior and nanoscale structure probed with STM from ruthenium single crystals to PVD and mass-selected nanoparticles.......Crossover in CO desorption behavior and nanoscale structure probed with STM from ruthenium single crystals to PVD and mass-selected nanoparticles....

  4. Oxide Nanocrystal Model Catalysts.

    Science.gov (United States)

    Huang, Weixin

    2016-03-15

    Model catalysts with uniform and well-defined surface structures have been extensively employed to explore structure-property relationships of powder catalysts. Traditional oxide model catalysts are based on oxide single crystals and single crystal thin films, and the surface chemistry and catalysis are studied under ultrahigh-vacuum conditions. However, the acquired fundamental understandings often suffer from the "materials gap" and "pressure gap" when they are extended to the real world of powder catalysts working at atmospheric or higher pressures. Recent advances in colloidal synthesis have realized controlled synthesis of catalytic oxide nanocrystals with uniform and well-defined morphologies. These oxide nanocrystals consist of a novel type of oxide model catalyst whose surface chemistry and catalysis can be studied under the same conditions as working oxide catalysts. In this Account, the emerging concept of oxide nanocrystal model catalysts is demonstrated using our investigations of surface chemistry and catalysis of uniform and well-defined cuprous oxide nanocrystals and ceria nanocrystals. Cu2O cubes enclosed with the {100} crystal planes, Cu2O octahedra enclosed with the {111} crystal planes, and Cu2O rhombic dodecahedra enclosed with the {110} crystal planes exhibit distinct morphology-dependent surface reactivities and catalytic properties that can be well correlated with the surface compositions and structures of exposed crystal planes. Among these types of Cu2O nanocrystals, the octahedra are most reactive and catalytically active due to the presence of coordination-unsaturated (1-fold-coordinated) Cu on the exposed {111} crystal planes. The crystal-plane-controlled surface restructuring and catalytic activity of Cu2O nanocrystals were observed in CO oxidation with excess oxygen. In the propylene oxidation reaction with O2, 1-fold-coordinated Cu on Cu2O(111), 3-fold-coordinated O on Cu2O(110), and 2-fold-coordinated O on Cu2O(100) were identified

  5. Catalysts, methods of making catalysts, and methods of use

    KAUST Repository

    Renard, Laetitia

    2014-03-06

    Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

  6. Comment on "Active sites for CO2 hydrogenation to methanol on Cu/ZnO catalysts"

    DEFF Research Database (Denmark)

    Nakamura, Junji; Fujitani, Tadahiro; Kuld, Sebastian

    2017-01-01

    Kattel et al (Reports, 24 March 2017, p. 1296) report that a zinc on copper (Zn/Cu) surface undergoes oxidation to zinc oxide/copper (ZnO/Cu) during carbon dioxide (CO2) hydrogenation to methanol and conclude that the Cu-ZnO interface is the active site for methanol synthesis. Similar experiments...

  7. Aberration-corrected imaging of active sites on industrial catalyst nanoparticles

    DEFF Research Database (Denmark)

    Gontard, Lionel Cervera; Chang, L-Y; Hetherington, CJD

    2007-01-01

    Picture perfect: Information about the local topologies of active sites on commercial nanoparticles can be gained with atomic resolution through spherical-aberration-corrected transmission electron microscopy (TEM). A powder of Pt nanoparticles on carbon black was examined with two advanced TEM t...

  8. Well-Defined Silica Supported Aluminum Hydride: Another Step Towards the Utopian Single Site Dream?

    KAUST Repository

    Werghi, Baraa

    2015-07-17

    Reaction of triisobutylaluminum with SBA15700 at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges. It leads to the formation of a well-defined bipodal [(≡SiO)2Al-CH2CH(CH3)2] 1a, silicon isobutyl [≡Si-CH2CH(CH3)2] 1b and a silicon hydride [≡Si-H] 1c. Their structural identity was characterized by FT-IR and advance solid-state NMR spectroscopies (1H, 13C, 29Si, 27Al and 2D multiple quantum), elemental and gas phase analysis, and DFT calculations. The reaction involves the formation of a highly reactive monopodal intermediate: [≡SiO-Al-[CH2CH(CH3)2]2], with evolution of isobutane. This intermediate undergoes two parallel routes: Transfer of either one isobutyl fragment or of one hydride to an adjacent silicon atom. Both processes occur by opening of a strained siloxane bridge, ≡Si-O-Si≡ but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O-Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a ß-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al-H bond and a O-Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10-5 mbar) generates Al-H through a ß-H elimination of isobutyl fragment. These supported well-defined Al-H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and 27Al–1H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.

  9. Effects of FeO{sub x}, CoO{sub x}, and NiO catalysts and calcination temperatures on the synthesis of single-walled carbon nanotubes through chemical vapor deposition of methane

    Energy Technology Data Exchange (ETDEWEB)

    Tan, S.-M. [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, S.P.S. Pulau Pinang (Malaysia); Chai, S.-P. [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, S.P.S. Pulau Pinang (Malaysia); School of Engineering, Monash University, Jalan Lagoon Selatan, 46150 Bandar Sunway, Selangor (Malaysia); Liu, W.-W. [School of Materials Science and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, S.P.S. Pulau Pinang (Malaysia); Mohamed, Abdul Rahman [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, S.P.S. Pulau Pinang (Malaysia)], E-mail: chrahman@eng.usm.my

    2009-05-27

    The oxides of cobalt, iron, and nickel catalysts were tested in chemical vapor deposition (CVD) of methane in synthesizing single-walled carbon nanotubes (SWNTs). All catalysts used in this study were prepared using impregnation method and calcined at temperatures ranging from 300 to 850 deg. C. The catalyst samples after CVD of methane were characterized using transmission electron microscopy (TEM). The TEM study elucidates that iron oxide serves as an effective catalyst for growing SWNTs. The presence of SWNTs on the catalyst was confirmed in the Raman study.

  10. Effects of FeOx, CoOx, and NiO catalysts and calcination temperatures on the synthesis of single-walled carbon nanotubes through chemical vapor deposition of methane

    International Nuclear Information System (INIS)

    Tan, S.-M.; Chai, S.-P.; Liu, W.-W.; Mohamed, Abdul Rahman

    2009-01-01

    The oxides of cobalt, iron, and nickel catalysts were tested in chemical vapor deposition (CVD) of methane in synthesizing single-walled carbon nanotubes (SWNTs). All catalysts used in this study were prepared using impregnation method and calcined at temperatures ranging from 300 to 850 deg. C. The catalyst samples after CVD of methane were characterized using transmission electron microscopy (TEM). The TEM study elucidates that iron oxide serves as an effective catalyst for growing SWNTs. The presence of SWNTs on the catalyst was confirmed in the Raman study.

  11. One single catalyst, Pd(OAc)2, for two sequential very different steps: allylic alcohol oxidation-Heck reaction. Access to functionalised alpha,beta-unsaturated ketones.

    Science.gov (United States)

    Batt, Frédéric; Gozzi, Christel; Fache, Fabienne

    2008-11-30

    A single addition of the catalyst, Pd(OAc)(2), was realised to mediate two transformations as different as allylic alcohol oxidation under O(2) and C-C bond formation of the Heck type, to give substituted alpha,beta-unsaturated ketones without intermediate purification.

  12. An Efficient Pd-Sn Catalyst Supported on MWNTs for Hydrogenation of High Concentrated Acetylene Feedstocks: The Potential Role of Isolated Adsorption Site

    Directory of Open Access Journals (Sweden)

    E. Esmaeili

    2014-04-01

    Full Text Available In the present study, tin-promoted Pd/MWNTs nanocatalystwas synthesized via polyol technique for application in hydrogenation of high-concentrated acetylene feedstocks. TEM images showed a restricted distribution of nanoparticles in the range of 3-5 nm. The results indicated that nanoparticles sizes were resistant to further catalyst deactivation. XRD patterns signified alloying between Pd and Sn which contained a high percentage of ordered intermetallic structures (70.8%, as confirmed by XPS. According to the results, pore blocking and/or fouling was known as the main reasons of the catalyst deactivation. Here, we supposed a novel deactivation mechanism based on which dehydrogenation susceptibility of carbonaceous species (green oil played a significant role in the formation of the isolated adsorption sites and then, catalyst deactivation.

  13. O-O bond formation in ruthenium-catalyzed water oxidation: single-site nucleophilic attack vs. O-O radical coupling.

    Science.gov (United States)

    Shaffer, David W; Xie, Yan; Concepcion, Javier J

    2017-10-16

    In this review we discuss at the mechanistic level the different steps involved in water oxidation catalysis with ruthenium-based molecular catalysts. We have chosen to focus on ruthenium-based catalysts to provide a more coherent discussion and because of the availability of detailed mechanistic studies for these systems but many of the aspects presented in this review are applicable to other systems as well. The water oxidation cycle has been divided in four major steps: water oxidative activation, O-O bond formation, oxidative activation of peroxide intermediates, and O 2 evolution. A significant portion of the review is dedicated to the O-O bond formation step as the key step in water oxidation catalysis. The two main pathways to accomplish this step, single-site water nucleophilic attack and O-O radical coupling, are discussed in detail and compared in terms of their potential use in photoelectrochemical cells for solar fuels generation.

  14. Comment on "Active sites for CO2hydrogenation to methanol on Cu/ZnO catalysts".

    Science.gov (United States)

    Nakamura, Junji; Fujitani, Tadahiro; Kuld, Sebastian; Helveg, Stig; Chorkendorff, Ib; Sehested, Jens

    2017-09-01

    Kattel et al (Reports, 24 March 2017, p. 1296) report that a zinc on copper (Zn/Cu) surface undergoes oxidation to zinc oxide/copper (ZnO/Cu) during carbon dioxide (CO 2 ) hydrogenation to methanol and conclude that the Cu-ZnO interface is the active site for methanol synthesis. Similar experiments conducted two decades ago by Fujitani and Nakamura et al demonstrated that Zn is attached to formate rather than being fully oxidized. Copyright © 2017, American Association for the Advancement of Science.

  15. Activation of Surface ReO x Sites on Al 2 O 3 Catalysts for Olefin Metathesis

    Energy Technology Data Exchange (ETDEWEB)

    Lwin, Soe; Li, Yuanyuan; Frenkel, Anatoly I.; Wachs, Israel E.

    2015-11-06

    The nature of activated surface ReOx sites and surface reaction intermediates for supported ReOx/Al2O3 catalysts during propylene self-metathesis were systematically investigated for the first time using in situ spectroscopy (Raman, UV–vis, XAS (XANES/EXAFS) and IR). In situ Raman spectroscopy reveals that olefins selectively interact with the surface dioxo ReO4 sites anchored at acidic alumina hydroxyls. In situ UV–vis indicates that surface Re5+ and some Re6+ sites form, and in situ XAS indicates a reduction in the number of Re=O bond character in the propylene self-metathesis reaction environment, especially as the temperature is increased. The appearance of oxygenated products during propylene activation supports the conclusion that catalyst activation involves removal of oxygen from the surface rhenia sites (pseudo-Wittig mechanism). Isotopic CD3CD=CD2 → CH3CH=CH2 switch experiments demonstrate the presence of surface Re=CD2 and Re=CDCD3 reaction intermediates, with the surface Re=CD2 species being the most abundant reaction intermediate. In situ IR spectroscopy indicates the presence of significant surface propylene π complexes on alumina and rhenia sites of the catalyst, which complicates analysis of surface reaction intermediates during propylene self-metathesis.

  16. New Developments in Robotics and Single-site Gynecologic Surgery.

    Science.gov (United States)

    Matthews, Catherine A

    2017-06-01

    Within the last 10 years there have been significant advances in minimal-access surgery. Although no emerging technology has demonstrated improved outcomes or fewer complications than standard laparoscopy, the introduction of the robotic surgical platform has significantly lowered abdominal hysterectomy rates. While operative time and cost were higher in robotic-assisted procedures when the technology was first introduced, newer studies demonstrate equivalent or improved robotic surgical efficiency with increased experience. Single-port hysterectomy has not improved postoperative pain or subjective cosmetic results. Emerging platforms with flexible, articulating instruments may increase the uptake of single-port procedures including natural orifice transluminal endoscopic cases.

  17. Molecular Level Control Through Dual Site Participation Using Bimetallic Catalysts - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    d' Itri, Julie, L.; Kovalchuk, Vladimir, I.

    2010-02-08

    The overall goal of this research program was to explore the hypothesis that it is possible to design a bimetallic surface such that each metal catalyzes different elementary reaction steps in an overall reaction pathway. A corollary to this hypothesis is that the different ensemble size requirements for an elementary reaction step can be used to force an elementary reaction step to occur on only one of the metals. The research program involved a combination of materials synthesis, chemical kinetics experiments, spectroscopic studies and computational investigations. The major outcome of this research program was the development and dissemination of the Dual Site Model, for which chlorocarbon reactions in the presence of hydrogen were used as model systems.

  18. Single-Atom Pd₁/Graphene Catalyst Achieved by Atomic Layer Deposition: Remarkable Performance in Selective Hydrogenation of 1,3-Butadiene.

    Science.gov (United States)

    Yan, Huan; Cheng, Hao; Yi, Hong; Lin, Yue; Yao, Tao; Wang, Chunlei; Li, Junjie; Wei, Shiqiang; Lu, Junling

    2015-08-26

    We reported that atomically dispersed Pd on graphene can be fabricated using the atomic layer deposition technique. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy both confirmed that isolated Pd single atoms dominantly existed on the graphene support. In selective hydrogenation of 1,3-butadiene, the single-atom Pd1/graphene catalyst showed about 100% butenes selectivity at 95% conversion at a mild reaction condition of about 50 °C, which is likely due to the changes of 1,3-butadiene adsorption mode and enhanced steric effect on the isolated Pd atoms. More importantly, excellent durability against deactivation via either aggregation of metal atoms or carbonaceous deposits during a total 100 h of reaction time on stream was achieved. Therefore, the single-atom catalysts may open up more opportunities to optimize the activity, selectivity, and durability in selective hydrogenation reactions.

  19. Redox-active on-surface polymerization of single-site divalent cations from pure metals by a ketone-functionalized phenanthroline

    Energy Technology Data Exchange (ETDEWEB)

    Skomski, Daniel; Tempas, Christopher D.; Bukowski, Gregory S.; Smith, Kevin A.; Tait, Steven L., E-mail: tait@indiana.edu [Department of Chemistry, Indiana University, 800 E. Kirkwood Ave., Bloomington, Indiana 47405 (United States)

    2015-03-14

    Metallic iron, chromium, or platinum mixing with a ketone-functionalized phenanthroline ligand on a single crystal gold surface demonstrates redox activity to a well-defined oxidation state and assembly into thermally stable, one dimensional, polymeric chains. The diverging ligand geometry incorporates redox-active sub-units and bi-dentate binding sites. The gold surface provides a stable adsorption environment and directs growth of the polymeric chains, but is inert with regard to the redox chemistry. These systems are characterized by scanning tunnelling microscopy, non-contact atomic force microscopy, and X-ray photoelectron spectroscopy under ultra-high vacuum conditions. The relative propensity of the metals to interact with the ketone group is examined, and it is found that Fe and Cr more readily complex the ligand than Pt. The formation and stabilization of well-defined transition metal single-sites at surfaces may open new routes to achieve higher selectivity in heterogeneous catalysts.

  20. Noble metal ionic catalysts.

    Science.gov (United States)

    Hegde, M S; Madras, Giridhar; Patil, K C

    2009-06-16

    Because of growing environmental concerns and increasingly stringent regulations governing auto emissions, new more efficient exhaust catalysts are needed to reduce the amount of pollutants released from internal combustion engines. To accomplish this goal, the major pollutants in exhaust-CO, NO(x), and unburned hydrocarbons-need to be fully converted to CO(2), N(2), and H(2)O. Most exhaust catalysts contain nanocrystalline noble metals (Pt, Pd, Rh) dispersed on oxide supports such as Al(2)O(3) or SiO(2) promoted by CeO(2). However, in conventional catalysts, only the surface atoms of the noble metal particles serve as adsorption sites, and even in 4-6 nm metal particles, only 1/4 to 1/5 of the total noble metal atoms are utilized for catalytic conversion. The complete dispersion of noble metals can be achieved only as ions within an oxide support. In this Account, we describe a novel solution to this dispersion problem: a new solution combustion method for synthesizing dispersed noble metal ionic catalysts. We have synthesized nanocrystalline, single-phase Ce(1-x)M(x)O(2-delta) and Ce(1-x-y)Ti(y)M(x)O(2-delta) (M = Pt, Pd, Rh; x = 0.01-0.02, delta approximately x, y = 0.15-0.25) oxides in fluorite structure. In these oxide catalysts, Pt(2+), Pd(2+), or Rh(3+) ions are substituted only to the extent of 1-2% of Ce(4+) ion. Lower-valent noble metal ion substitution in CeO(2) creates oxygen vacancies. Reducing molecules (CO, H(2), NH(3)) are adsorbed onto electron-deficient noble metal ions, while oxidizing (O(2), NO) molecules are absorbed onto electron-rich oxide ion vacancy sites. The rates of CO and hydrocarbon oxidation and NO(x) reduction (with >80% N(2) selectivity) are 15-30 times higher in the presence of these ionic catalysts than when the same amount of noble metal loaded on an oxide support is used. Catalysts with palladium ion dispersed in CeO(2) or Ce(1-x)Ti(x)O(2) were far superior to Pt or Rh ionic catalysts. Therefore, we have demonstrated that the

  1. Single cobalt sites in mesoporous N-doped carbon matrix for selective catalytic hydrogenation of nitroarenes

    KAUST Repository

    Sun, Xiaohui

    2017-11-20

    A supported cobalt catalyst with atomically dispersed Co-Nx sites (3.5 wt% Co) in a mesoporous N-doped carbon matrix (named Co@mesoNC) is synthesized by hydrolysis of tetramethyl orthosilicate (TMOS) in a Zn/Co bimetallic zeolitic imidazolate framework (BIMZIF(Co,Zn)), followed by high-temperature pyrolysis and SiO2 leaching. A combination of TEM, XRD XPS and X-ray absorption spectroscopy studies confirm the absence of cobalt nanoparticles and indicate that these highly dispersed cobalt species are present in the form of Co-Nx. The exclusive formation of Co-Nx sites in the carbon matrix is attributed to the presence of a large amount of Zn and N in the BIMZIF precursor together with the presence of SiO2 in the pore space of this framework, extending the initial spatial distance between cobalt atoms and thereby impeding their agglomeration. The presence of SiO2 during high-temperature pyrolysis is proven crucial to create mesoporosity and a high BET area and pore volume in the N-doped carbon support (1780 m2 g−1, 1.54 cm3 g−1). This heterogeneous Co@mesoNC catalyst displays high activity and selectivity (>99%) for the selective hydrogenation of nitrobenzene to aniline at mild conditions (0.5–3 MPa, 343–383 K). When more challenging substrates (functionalized nitroarenes) are hydrogenated, the catalyst Co@mesoNC displays an excellent chemoselectivity to the corresponding substituted anilines.The presence of mesoporosity improves mass transport of reactants and/or products and the accessibility of the active Co-Nx sites, and greatly reduces deactivation due to fouling.

  2. A Theoretical Investigation on CO Oxidation by Single-Atom Catalysts M1/γ-Al2O3(M=Pd, Fe, Co, and Ni).

    Science.gov (United States)

    Yang, Tao; Fukuda, Ryoichi; Hosokawa, Saburo; Tanaka, Tsunehiro; Sakaki, Shigeyoshi; Ehara, Masahiro

    2017-04-07

    Single-atom catalysts have attracted much interest recently because of their excellent stability, high catalytic activity, and remarkable atom efficiency. Inspired by the recent experimental discovery of a highly efficient single-atom catalyst Pd 1 /γ-Al 2 O 3 , we conducted a comprehensive DFT study on geometries, stabilities and CO oxidation catalytic activities of M 1 /γ-Al 2 O 3 (M=Pd, Fe, Co, and Ni) by using slab-model. One of the most important results here is that Ni 1 /Al 2 O 3 catalyst exhibits higher activity in CO oxidation than Pd 1 /Al 2 O 3 . The CO oxidation occurs through the Mars van Krevelen mechanism, the rate-determining step of which is the generation of CO 2 from CO through abstraction of surface oxygen. The projected density of states (PDOS) of 2 p orbitals of the surface O, the structure of CO-adsorbed surface, charge polarization of CO and charge transfer from CO to surface are important factors for these catalysts. Although the binding energies of Fe and Co with Al 2 O 3 are very large, those of Pd and Ni are small, indicating that the neighboring O atom is not strongly bound to Pd and Ni, which leads to an enhancement of the reactivity of the O atom toward CO. The metal oxidation state is suggested to be one of the crucial factors for the observed catalytic activity.

  3. Density-functional theory study of dimethyl carbonate synthesis by methanol oxidative carbonylation on single-atom Cu1/graphene catalyst

    Science.gov (United States)

    Sun, Wei; Shi, Ruina; Wang, Xuhui; Liu, Shusen; Han, Xiaoxia; Zhao, Chaofan; Li, Zhong; Ren, Jun

    2017-12-01

    The mechanism for dimethyl carbonate (DMC) synthesis by oxidation carbonylation of methanol on a single-atom Cu1/graphene catalyst was investigated by density-functional theory calculations. Carbon vacancies in graphene can significantly enhance the interaction between Cu atoms and graphene supports, and provide an increased transfer of electrons from Cu atoms to the graphene sheet. Compared with Cu-doped divacancy graphene (Cu/DG), Cu-doped monovacancy graphene (Cu/MG) provides a stronger interaction between adsorbents and the catalyst surface. Among the reaction processes over Cu1/graphene catalysts, CO insertion into methoxide was more favorable than dimethoxide. The rate-limiting step on the Cu/DG surface is the carbomethoxide reaction with methoxide, which is exothermic by 164.6 kJ mol-1 and has an activation barrier of 190.9 kJ mol-1 energy. Compared with that on the Cu crystal surface, Cu4 and Cu3Rh clusters, and the Cu2O(111) surface, the rate-determining step for DMC formation on Cu/MG, which is CO insertion into methoxide, needs to overcome the lowest barrier of 73.5 kJ mol-1 and is exothermic by 44.6 kJ mol-1. Therefore, Cu/MG was beneficial to the formation of DMC as a single-atom catalyst.

  4. Inhibition of microbial growth on air cathodes of single chamber microbial fuel cells by incorporating enrofloxacin into the catalyst layer.

    Science.gov (United States)

    Liu, Weifeng; Cheng, Shaoan; Sun, Dan; Huang, Haobin; Chen, Jie; Cen, Kefa

    2015-10-15

    The inevitable growth of aerobic bacteria on the surface of air cathodes is an important factor reducing the performance stability of air cathode single-chamber membrane-free microbial fuel cells (MFCs). Thus searching for effective methods to inhibit the cathodic microbial growth is critical for the practical application of MFCs. In this study, enrofloxacin (ENR), a broad spectrum fluoroquinolone antibiotic, was incorporated into the catalyst layer of activated carbon air cathodes (ACACs) to inhibit the cathodic microbial growth. The biomass content on ACACs was substantially reduced by 60.2% with ENR treatment after 91 days of MFCs operation. As a result of the inhibited microbial growth, the oxygen reduction catalytic performance of the ENR treated ACACs was much stable compared to the fast performance decline of the untreated control. Consequently, a quite stable electricity production was obtained for the MFCs with the ENR treated ACACs, in contrast with a 22.5% decrease in maximum power density of the MFCs with the untreated cathode. ENR treatment of ACACs showed minimal effects on the anode performance. These results indicate that incorporating antibiotics into ACACs should be a simple and effective strategy to inhibit the microbial growth and improve the long-term stability of the performance of air cathode and the electricity production of MFCs. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Recent Developments in Single-Walled Carbon Nanotube Thin Films Fabricated by Dry Floating Catalyst Chemical Vapor Deposition.

    Science.gov (United States)

    Zhang, Qiang; Wei, Nan; Laiho, Patrik; Kauppinen, Esko I

    2017-11-27

    Transparent conducting films (TCFs) are critical components of many optoelectronic devices that pervade modern technology. Due to their excellent optoelectronic properties and flexibility, single-walled carbon nanotube (SWNT) films are regarded as an important alternative to doped metal oxides or brittle and expensive ceramic materials. Compared with liquid-phase processing, the dry floating catalyst chemical vapor deposition (FCCVD) method without dispersion of carbon nanotubes (CNTs) in solution is more direct and simpler. By overcoming the tradeoff between CNT length and solubility during film fabrication, the dry FCCVD method enables production of films that contain longer CNTs and offer excellent optoelectronic properties. This review focuses on fabrication of SWNT films using the dry FCCVD method, covering SWNT synthesis, thin-film fabrication and performance regulation, the morphology of SWNTs and bundles, transparency and conductivity characteristics, random bundle films, patterned films, individual CNT networks, and various applications, especially as TCFs in touch displays. Films based on SWNTs produced by the dry FCCVD method are already commercially available for application in touch display devices. Further research on the dry FCCVD method could advance development of not only industrial applications of CNTs but also the fundamental science of related nanostructured materials and nanodevices.

  6. Ethylbenzene dehydrogenation over FeOx/(Mg,Zn)(Al)O catalysts derived from hydrotalcites: Role of MgO as basic sites

    KAUST Repository

    Balasamy, Rabindran J.

    2011-05-01

    A series of Mg3-xZnxFe0.5Al0.5 mixed oxide catalysts derived from hydrotalcites were tested in the ethylbenzene dehydrogenation to styrene in He atmosphere at 550 °C. The catalysts were prepared by coprecipitation from the nitrates of metal components followed by calcination to mixed oxides at 550 °C. A part of Mg2+ in Mg 3Fe0.5Al0.5 mixed oxide was replaced with Zn2+ to test the effect of MgO as the support. The mixed oxides were composed of periclase and spinel-type compounds with a high surface area of 100-180m2gcat-1. Mössbauer and XPS measurements indicated the presence of Fe3+ on the catalysts and H2-TPR measurement suggested that the dehydrogenation reaction is catalyzed by the reduction-oxidation between Fe3+/Fe2+. The activity of Mg3-xZnxFe0.5Al0.5 mixed oxide decreased with increasing x, indicating an important role of MgO on the activity. Both CO2-TPD measurements as well as IR measurements of adsorbed CO2 clearly indicated the presence of basic sites of Mg 2+O2- on the catalysts. It seems that the combination of Mg2+O2- and Fe3+ was essential for the catalytic activity. It is concluded that the surface base sites generated on O2- bound Mg2+ near Fe3+ sites are responsible for H+-abstraction; the dehydrogenation of ethylbenzene was initiated by the H+ abstraction on Mg2+O2- basic sites, and accelerated by the reduction-oxidation of Fe3+/Fe2+ active species. © 2011 Elsevier B.V.

  7. Reversible conversion of valence-tautomeric copper metal-organic frameworks dependent single-crystal-to-single-crystal oxidation/reduction: a redox-switchable catalyst for C-H bonds activation reaction.

    Science.gov (United States)

    Huang, Chao; Wu, Jie; Song, Chuanjun; Ding, Ran; Qiao, Yan; Hou, Hongwei; Chang, Junbiao; Fan, Yaoting

    2015-06-28

    Upon single-crystal-to-single-crystal (SCSC) oxidation/reduction, reversible structural transformations take place between the anionic porous zeolite-like Cu(I) framework and a topologically equivalent neutral Cu(I)Cu(II) mixed-valent framework. The unique conversion behavior of the Cu(I) framework endowed it as a redox-switchable catalyst for the direct arylation of heterocycle C-H bonds.

  8. Theoretical investigation of active sites at the corners of Mgcl 2 crystallites in supported ziegler-natta catalysts

    KAUST Repository

    Correa, Andrea

    2012-05-08

    We present a theoretical study on possible models of catalytic active species corresponding to Ti-chloride species adsorbed at the corners of MgCl 2 crystallites. First we focused our efforts on the interaction between prototypes of three industrially relevant Lewis bases used as internal donors (1,3-diethers, alkoxysilanes and succinates) and MgCl 2 units at the corner of a MgCl 2 crystallite. Our calculations show that the energetic cost to extract MgCl 2 units at the corner of (104) edged MgCl 2 crystallites is not prohibitive, and that Lewis bases added during catalyst preparation make this process easier. After removal of one MgCl 2 unit, a short (110) stretch joining the (104) edges is formed. Adsorption of TiCl 4 on the generated vacancy originates a Ti-active species. In the second part of this manuscript, we report on the stereo- and regioselective behavior of this model of active species in the absence as well as in the presence of the three Lewis bases indicated above. Surface reconstruction due to the additional adsorption of an extra MgCl 2 layer is also considered. We show that, according to experimental data, Lewis bases coordinated in the proximity of the active Ti center confer a remarkable stereoselectivity. Moreover, surface reconstruction as well as donor coordination would improve regioselectivity by disfavoring secondary propene insertion. While still models of possible active species, our results indicate that defects, corners and surface reconstruction should be considered as possible anchoring sites for the catalytically active Ti-species. © 2012 American Chemical Society.

  9. Site-directed zebrafish transgenesis into single landing sites with the phiC31 integrase system.

    Science.gov (United States)

    Mosimann, Christian; Puller, Ann-Christin; Lawson, Katy L; Tschopp, Patrick; Amsterdam, Adam; Zon, Leonard I

    2013-08-01

    Linear DNA-based and Tol2-mediated transgenesis are powerful tools for the generation of transgenic zebrafish. However, the integration of multiple copies or transgenes at random genomic locations complicates comparative transgene analysis and makes long-term transgene stability unpredictable with variable expression. Targeted, site-directed transgene integration into pre-determined genomic loci can circumvent these issues. The phiC31 integrase catalyzes the unidirectional recombination reaction between heterotypic attP and attB sites and is an efficient platform for site-directed transgenesis. We report the implementation of the phiC31 integrase-mediated attP/attB recombination for site-directed zebrafish transgenics of attB-containing transgene vectors into single genomic attP landing sites. We generated Tol2-based single-insertion attP transgenic lines and established their performance in phiC31 integrase-catalyzed integration of an attB-containing transgene vector. We found stable germline transmission into the next generation of an attB reporter transgene in 34% of all tested animals. We further characterized two functional attP landing site lines and determined their genomic location. Our experiments also demonstrate tissue-specific transgene applications as well as long-term stability of phiC31-mediated transgenes. Our results establish phiC31 integrase-controlled site-directed transgenesis into single, genomic attP sites as space-, time-, and labor-efficient zebrafish transgenesis technique. The described reagents are available for distribution to the zebrafish community. Copyright © 2013 Wiley Periodicals, Inc.

  10. Synthesis of High-quality Single- and Double-walled Carbon Nanotubes on Fe/MgO Catalysts

    Directory of Open Access Journals (Sweden)

    Mehran B. Kashi

    2016-06-01

    Full Text Available In this study, Fe/MgO catalysts with three different iron contents (5, 10, and 15 wt.% were prepared by three catalyst preparation methods: impregnation, solution combustion synthesis, and co-calcination of metal ni‐ trates. The resulting catalysts were subjected to methane at 900°C in order to grow carbon nanotubes (CNTs. The powders and products were then studied by X-ray diffraction (XRD, differential thermal analysis (DTA, scanning and transmission electron microscopy (SEM and TEM, and Raman spectroscopy. Formation of MgFe2O4 upon heating the catalysts to 900°C was confirmed by XRD. After the growth step, corresponding peaks of MgFe2O4 disappeared and metallic iron peaks appeared, indicating that MgFe2O4 is the responsible phase for production of iron nanoparticles. HRTEM images showed that the product on the 5 wt.% catalysts was mostly SWNTs and DWNTs with no evidence of carbon nanofi‐ bres or multi-walled carbon nanotubes on the co-calcina‐ tion catalyst. Furthermore, ID/IG ratios obtained from Raman spectra were all below 0.1, except for one sample, showing the good quality of the products.

  11. Oxidation catalyst

    Science.gov (United States)

    Ceyer, Sylvia T.; Lahr, David L.

    2010-11-09

    The present invention generally relates to catalyst systems and methods for oxidation of carbon monoxide. The invention involves catalyst compositions which may be advantageously altered by, for example, modification of the catalyst surface to enhance catalyst performance. Catalyst systems of the present invention may be capable of performing the oxidation of carbon monoxide at relatively lower temperatures (e.g., 200 K and below) and at relatively higher reaction rates than known catalysts. Additionally, catalyst systems disclosed herein may be substantially lower in cost than current commercial catalysts. Such catalyst systems may be useful in, for example, catalytic converters, fuel cells, sensors, and the like.

  12. Response to Comment on "Active sites for CO2hydrogenation to methanol on Cu/ZnO catalysts".

    Science.gov (United States)

    Kattel, Shyam; Ramírez, Pedro J; Chen, Jingguang G; Rodriguez, José A; Liu, Ping

    2017-09-01

    In their Comment on the our recent Report, Nakamura et al argue that our x-ray photoelectron spectroscopy (XPS) analysis was affected by the presence of formate species on the catalyst surface. This argument is not valid because the reactant gases were evacuated at temperatures from 525 to 575 kelvin, conditions under which formate is not stable on the catalyst surface. An analysis of the XPS results obtained after exposing zinc oxide/copper (111) [ZnO/Cu(111)] surfaces to hydrogen (H 2 ) and mixtures of carbon dioxide (CO 2 )/H 2 show an absence of carbon (C) 1s signal, no asymmetries in the oxygen (O) 1s peak, and a Zn:O intensity close to 1:1. Thus, the most active phase of these catalysts contained a ZnO-Cu interface. Copyright © 2017, American Association for the Advancement of Science.

  13. Transumbilical laparoendoscopic single-site donor nephrectomy: Without the use of a single port access device

    Directory of Open Access Journals (Sweden)

    Deepak Dubey

    2011-01-01

    Conclusions : Transumbilical LESS-DN can be cost-effectively performed using conventional laparoscopy instruments and without the need for a single port access device. Warm ischemia times with this technique are comparable with that during conventional multiport laparoscopic donor nephrectomy.

  14. The production of high efficiency Ziegler-Natta catalyst with dual active sites nature using cyclohexyl chloride as promoter with super activity and produced superior polyethylene with controllable molecular weight distribution.

    Science.gov (United States)

    Seifali Abbas-Abadi, Mehrdad

    2017-01-01

    In the previous studies, the several halocarbons (HC) were tested as promoters for a Ti-based Ziegler-Natta (ZN) catalyst at different polymerization conditions. The Results showed that chloro cyclohexane has the best operation in catalyst activity, polymer particle size growth, hydrogen responsibility and wax reduction too. For the first time in this study, the effect of Al/Ti ratio on the optimum HC/Ti ratio has been considered and the results showed that the optimum HC/Ti ratio depends on the Al/Ti ratio directly. In the optimum HC/Ti ratio, the catalyst activity and hydrogen responsibility ratio of the catalyst increase up to 125 and 55% respectively. The acceptable growth of polymer powder up to 46%, lower flow rate ratio (FRR) up to 19% and decrease of wax amount up to 12%, completed the promotion results. Furthermore, in the next part of this study and as key note, a little dose of halocarbon was used in the catalyst preparation to produce the special catalysts with dual active sites. In the catalyst preparation, the concentration of each active sites depends on the halocarbon amount and it can control the molecular weight distribution of the produced polyethylene; because each active sites have different response to hydrogen. The halocarbon based catalysts showed the remarkable effect on the catalyst activity, the molecular weight and especially molecular weight distribution (MWD). The flow rate ratio and MWD could be increased up to 77 and 88% respectively as the main result of halocarbon addition during the catalyst preparation.

  15. Preparation of highly dispersed Ru-Sn bimetallic supported catalysts from the single source precursors Cp(PPh32Ru-SnX3 (X = Cl or Br

    Directory of Open Access Journals (Sweden)

    Ana Cláudia Bernardes Silva

    2003-06-01

    Full Text Available In this work highly dispersed Ru-Sn bimetallic catalysts have been prepared from organobimetallic Cp(PPh32Ru-SnX3 (X = Cl or Br complexes. These single source precursors can be easily impregnated in high surface area supports, such as activated carbon and sol-gel SiO2, and upon controlled thermal treatment the ligands are released as volatile products resulting in the formation of the bimetallic system Ru-Sn. Catalytic reactions, such as hydrodechlorination of CCl4 and chlorobenzene and TPR (Temperature Programmed Reduction experiments carried out with these RuSn catalysts suggested a strong interaction between Ruthenium and Tin. Mössbauer measurements showed that these materials when exposed to air are immediately oxidized to form Sn (IV. It was shown that upon controlled reduction conditions with H2 it is possible to reduce selectively Sn to different oxidation states and different phases. The Sn oxidation state showed significant effect on the catalytic hydrogenation of 1,5-cyclooctadiene. The use of these single source precursors with a controlled decomposition/reduction procedure allows the preparation of unique catalysts with an intimate interaction between the components ruthenium and tin and the possibility of varying the Sn oxidation state around the Ru metal.

  16. ZIF-8 with Ferrocene Encapsulated: A Promising Precursor to Single-Atom Fe Embedded Nitrogen-Doped Carbon as Highly Efficient Catalyst for Oxygen Electroreduction.

    Science.gov (United States)

    Wang, Jinpeng; Han, Guokang; Wang, Liguang; Du, Lei; Chen, Guangyu; Gao, Yunzhi; Ma, Yulin; Du, Chunyu; Cheng, Xinqun; Zuo, Pengjian; Yin, Geping

    2018-03-05

    The oxygen reduction reaction (ORR) plays an important role in the fields of energy storage and conversion technologies, including metal-air batteries and fuel cells. The development of nonprecious metal electrocatalysts with both high ORR activity and durability to replace the currently used costly Pt-based catalyst is critical and still a major challenge. Herein, a facile and scalable method is reported to prepare ZIF-8 with single ferrocene molecules trapped within its cavities (Fc@ZIF-8), which is utilized as precursor to porous single-atom Fe embedded nitrogen-doped carbon (Fe-N-C) during high temperature pyrolysis. The catalyst shows a half-wave potential (E 1/2 ) of 0.904 V, 67 mV higher than commercial Pt/C catalyst (0.837 V), which is among the best compared with reported results for ORR. Significant electrochemical properties are attributed to the special configuration of Fc@ZIF-8 transforming into a highly dispersed iron-nitrogen coordination moieties embedded carbon matrix. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Supported rhodium catalysts for ammonia-borane hydrolysis. Dependence of the catalytic activity on the highest occupied state of the single rhodium atoms

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Liangbing; Li, Hongliang; Zhang, Wenbo; Zhao, Xiao; Qiu, Jianxiang; Li, Aowen; Zheng, Xusheng; Zeng, Jie [Hefei National Lab. for Physical Sciences at the Microscale, Key Lab. of Strongly-Coupled Quantum Matter Physics, Chinese Academy of Sciences, Hefei, Anhui(China); Department of Chemical Physics, University of Science and Technology of China, Hefei, Anhui (China); Hu, Zhenpeng [School of Physics, Nankai University, Tianjin (China); Si, Rui [Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, Chinese Academy of Sciences (China)

    2017-04-18

    Supported metal nanocrystals have exhibited remarkable catalytic performance in hydrogen generation reactions, which is influenced and even determined by their supports. Accordingly, it is of fundamental importance to determine the direct relationship between catalytic performance and metal-support interactions. Herein, we provide a quantitative profile for exploring metal-support interactions by considering the highest occupied state in single-atom catalysts. The catalyst studied consisted of isolated Rh atoms dispersed on the surface of VO{sub 2} nanorods. It was observed that the activation energy of ammonia-borane hydrolysis changed when the substrate underwent a phase transition. Mechanistic studies indicate that the catalytic performance depended directly on the highest occupied state of the single Rh atoms, which was determined by the band structure of the substrates. Other metal catalysts, even with non-noble metals, that exhibited significant catalytic activity towards NH{sub 3}BH{sub 3} hydrolysis were rationally designed by adjusting their highest occupied states. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Design of Single-Atom Co-N5Catalytic Site: A Robust Electrocatalyst for CO2Reduction with Nearly 100% CO Selectivity and Remarkable Stability.

    Science.gov (United States)

    Pan, Yuan; Lin, Rui; Chen, Yinjuan; Liu, Shoujie; Zhu, Wei; Cao, Xing; Chen, Wenxing; Wu, Konglin; Cheong, Weng-Chon; Wang, Yu; Zheng, Lirong; Luo, Jun; Lin, Yan; Liu, Yunqi; Liu, Chenguang; Li, Jun; Lu, Qi; Chen, Xin; Wang, Dingsheng; Peng, Qing; Chen, Chen; Li, Yadong

    2018-03-14

    We develop an N-coordination strategy to design a robust CO 2 reduction reaction (CO 2 RR) electrocatalyst with atomically dispersed Co-N 5 site anchored on polymer-derived hollow N-doped porous carbon spheres. Our catalyst exhibits high selectivity for CO 2 RR with CO Faradaic efficiency (FE CO ) above 90% over a wide potential range from -0.57 to -0.88 V (the FE CO exceeded 99% at -0.73 and -0.79 V). The CO current density and FE CO remained nearly unchanged after electrolyzing 10 h, revealing remarkable stability. Experiments and density functional theory calculations demonstrate single-atom Co-N 5 site is the dominating active center simultaneously for CO 2 activation, the rapid formation of key intermediate COOH* as well as the desorption of CO.

  19. Inclusions related to catalyst and medium for transmitting pressure in diamond single crystals grown at high temperature and high pressure from the Fe-C system

    International Nuclear Information System (INIS)

    Yin Longwei; Li Musen; Hao Zhaoyin; Zhang Jiongfa

    2001-01-01

    Inclusion entrapment in a crystal is one of the most important characteristics for the crystal growth technique from solution. Diamond single crystals grown from the Fe-C system at high temperature-high pressure usually contain inclusions related to the molten catalyst and the medium (pyrophyllite) for transmitting pressure. During the growth of the diamond, the inclusions are trapped by the growth front or are formed through reaction between the contaminants trapped in the diamond. In the present article, the inclusions related to the catalyst and pyrophyllite were systemically examined by transmission electron microscopy. The chemical composition and crystal structure of the inclusions were, for the first time, determined by selected area electron diffraction pattern combined with energy dispersive x-ray spectrometry. It was shown that the inclusions are mainly composed of orthorhombic Fe 3 C, orthorhombic FeSi 2 , hexagonal SiO 2 and face-centred cubic SiC. (author)

  20. Deactivation of solid catalysts in liquid media: the case of leaching of active sites in biomass conversion reactions

    DEFF Research Database (Denmark)

    Sádaba, Irantzu; Lopez Granados, Manuel; Riisager, Anders

    2015-01-01

    . However, as a consequence of the development of new processes for biorefineries, an increasing number of reactions deal with liquid media, and thus, the stability and reusability of a solid catalyst in this situation represent a huge challenge that requires specific attention. Leaching of active phases...... reactions have been chosen as examples to illustrate the importance of these aspects....

  1. Predictive design of engineered multifunctional solid catalysts.

    Science.gov (United States)

    Raja, Robert; Potter, Matthew E; Newland, Stephanie H

    2014-06-07

    The ability to devise and design multifunctional active sites at the nanoscale, by drawing on the intricate ability of enzymes to evolve single-sites with distinctive catalytic function, has prompted complimentary and concordant developments in the field of catalyst design and in situ operando spectroscopy. Innovations in design-application approach have led to a more fundamental understanding of the nature of the active site and its mechanistic influence at a molecular level, that have enabled robust structure-property correlations to be established, which has facilitated the dextrous manipulation and predictive design of redox and solid-acid sites for industrially-significant, sustainable catalytic transformations.

  2. Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts.

    Science.gov (United States)

    Yue, Lin; He, Chi; Hao, Zhengping; Wang, Shunbing; Wang, Hailin

    2014-03-01

    Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption-desorption, X-ray fluorescence (XRF), H2 temperature programmed reduction (H2-TPR), and NH3 temperature programmed desorption (NH3-TPD). Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2-methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from isomerization and protolysis reactions. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  3. Diels–Alder reactions in confined spaces: the influence of catalyst structure and the nature of active sites for the retro-Diels–Alder reaction

    Directory of Open Access Journals (Sweden)

    Ángel Cantín

    2016-10-01

    Full Text Available Diels–Alder cycloaddition between cyclopentadiene and p-benzoquinone has been studied in the confined space of a pure silica zeolite Beta and the impact on reaction rate due to the concentration effect within the pore and diffusion limitations are discussed. Introduction of Lewis or Brønsted acid sites on the walls of the zeolite strongly increases the reaction rate. However, contrary to what occurs with mesoporous molecular sieves (MCM-41, Beta zeolite does not catalyse the retro-Diels–Alder reaction, resulting in a highly selective catalyst for the cycloaddition reaction.

  4. Integrated Transmission Electron and Single‐Molecule Fluorescence Microscopy Correlates Reactivity with Ultrastructure in a Single Catalyst Particle

    OpenAIRE

    Hendriks, Frank C.; Mohammadian, Sajjad; Ristanović, Zoran; Kalirai, Sam; Meirer, Florian; Vogt, Eelco T. C.; Bruijnincx, Pieter C. A.; Gerritsen, Hans C.; Weckhuysen, Bert M.

    2017-01-01

    Abstract Establishing structure–activity relationships in complex, hierarchically structured nanomaterials, such as fluid catalytic cracking (FCC) catalysts, requires characterization with complementary, correlated analysis techniques. An integrated setup has been developed to perform transmission electron microscopy (TEM) and single‐molecule fluorescence (SMF) microscopy on such nanostructured samples. Correlated structure–reactivity information was obtained for 100 nm thin, microtomed secti...

  5. Fe-Ti-O based catalyst for large-chiral-angle single-walled carbon nanotube growth

    DEFF Research Database (Denmark)

    He, Maoshuai; Zhang, Lili; Jiang, Hua

    2016-01-01

    Fe nanoparticles with subsequent high-temperature air calcination, which favours the formation of a homogeneous Fe-Ti-O solid solution. Using CO as the carbon feedstock, chemical vapour deposition growth of SWNTs at 800 °C was demonstrated on the Fe-Ti-O catalyst. Nanobeam electron diffraction...

  6. Catalysts for Environmental Remediation

    DEFF Research Database (Denmark)

    Abrams, B. L.; Vesborg, Peter Christian Kjærgaard

    2013-01-01

    on titania (V2O5-WO3/TiO2) as the example catalyst. The main photocatalysts examined for mineralization of organic compounds were TiO2 and MoS2. It is important to obtain insight into the catalyst structure-to-activity relationship in order to understand and locate the active site(s). In this chapter......The properties of catalysts used in environmental remediation are described here through specific examples in heterogeneous catalysis and photocatalysis. In the area of heterogeneous catalysis, selective catalytic reduction (SCR) of NOx was used as an example reaction with vanadia and tungsta...

  7. Transumbilical laparoendoscopic single-site surgery versus conventional laparoscopy for the resection of retroperitoneal paragangliomas.

    Science.gov (United States)

    Xu, Weifeng; Li, Hanzhong; Ji, Zhigang; Yan, Weigang; Zhang, Yushi; Zhang, Xuebin; Li, Qian

    2015-09-01

    To compare transumbilical laparoendoscopic single-site surgery with conventional laparoscopy for the resection of retroperitoneal paragangliomas. In the present case-control study, we compared 11 transumbilical laparoendoscopic single-site surgery procedures with 22 conventional laparoscopy procedures carried out to treat retroperitoneal paragangliomas between June 2004 and October 2013 at Peking Union Medical Hospital, Beijing, China. Operative time, estimated intraoperative blood loss, blood transfusions, intraoperative hypertension, intraoperative hypotension, highest intraoperative systolic blood pressure, lowest intraoperative systolic blood pressure, postoperative fatigue time, postoperative systematic inflammation reaction syndrome, 24-h postoperative visual analog scale scores, postoperative hospital stay duration, and postoperative complications were recorded and analyzed. There were no significant differences in patient characteristics. All surgical procedures were successfully completed in both groups. Minor complications occurred in one case in the laparoendoscopic single-site surgery group and in two cases in the conventional laparoscopy group. In the laparoendoscopic single-site surgery group, the operative time was longer than that in the conventional laparoscopy group (P = 0.001). There were no significant differences in terms of intraoperative hypertension, intraoperative hypotension, highest intraoperative systolic blood pressure, lowest intraoperative systolic blood pressure, estimated blood loss, postoperative fatigue time, postoperative hospital stay or systematic inflammation reaction syndrome between the two groups. The 24-h postoperative visual analog scale score was lower in the laparoendoscopic single-site surgery group (P = 0.002). No recurrence or metastases were observed over the duration of the postoperative follow up. In properly selected patients, transumbilical laparoendoscopic single-site surgery is a feasible, safe and effective

  8. Computational Study on M1/POM Single-Atom Catalysts (M = Cu, Zn, Ag, and Au; POM = [PW12O40]3-): Metal-Support Interactions and Catalytic Cycle for Alkene Epoxidation.

    Science.gov (United States)

    Liu, Chun-Guang; Jiang, Meng-Xu; Su, Zhong-Min

    2017-09-05

    Geometrical structures, metal-support interactions, and infrared (IR) spectroscopy of a series of M 1 /POM (M = Cu, Zn, Ag, and Au; POM = [PW 12 O 40 ] 3- ) single-atom catalysts (SACs), and catalytic cycle for alkene epoxidation catalyzed by M 1 /POM SACs were studied using density functional theory (DFT) calculations. The calculations demonstrate that the most probable anchoring sties for the isolated single atoms studied here in the M 1 /POM SACs are the fourfold hollow sites on the surface of POM support. The bonding interaction between single metal atom and surface of POM support comes from the molecular orbitals with a mixture of d atomic orbital of metal and 2p group orbital of surface oxygen atoms of POM cage. The calculated adsorption energy of isolated metal atoms in these M 1 /POM SACs indicates that the early transition metals (Cu and Zn) have high thermal stability. The DFT-derived IR spectra show that the four characteristic peaks of free Keggin-type POM structure split into six because of introduction of isolated metal atom. Compared with other metal atoms, the Zn 1 /POM SAC has the high reactivity for activity of dioxygen molecule, because the dioxygen moiety in Zn 1 /POM SAC displays O 2 - · radical feature with [POM 4- ·Zn 2+ O 2 - ·] 3- configuration. Finally, a catalytic cycle for ethylene epoxidation by O 2 catalyzed by Zn 1 /POM SAC was proposed based on our DFT calculations. Supported noble-metal SACs are among the most important catalysts currently. However, noble metals are expensive and of limited supply. Development of non-noble-metal SACs is of essential importance. Therefore, the reported Zn 1 /POM SAC would be very useful to guide the search for SACs into non-noble metals.

  9. Fibers comprised of epitaxially grown single-wall carbon nanotubes, and a method for added catalyst and continuous growth at the tip

    Science.gov (United States)

    Kittrell, W. Carter; Wang, Yuhuang; Kim, Myung Jong; Hauge, Robert H.; Smalley, Richard E.; Marek leg, Irene Morin

    2010-06-01

    The present invention is directed to fibers of epitaxially grown single-wall carbon nanotubes (SWNTs) and methods of making same. Such methods generally comprise the steps of: (a) providing a spun SWNT fiber; (b) cutting the fiber substantially perpendicular to the fiber axis to yield a cut fiber; (c) etching the cut fiber at its end with a plasma to yield an etched cut fiber; (d) depositing metal catalyst on the etched cut fiber end to form a continuous SWNT fiber precursor; and (e) introducing feedstock gases under SWNT growth conditions to grow the continuous SWNT fiber precursor into a continuous SWNT fiber.

  10. Deactivation-resistant catalyst for selective catalyst reduction of NOx

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a catalyst for selective catalytic reduction of NOx in alkali metal containing flue gas using ammonia as reductant, the catalyst comprising a surface with catalytically active sites, wherein the surface is at least partly coated with a coating comprising at least...... one metal oxide. In another aspect the present invention relates to the use of said catalyst and to a method of producing said catalyst. In addition, the present invention relates to a method of treating an catalyst for conferring thereon an improved resistance to alkali poisoning....

  11. Single-step immobilization of cell adhesive peptides on a variety of biomaterial substrates via tyrosine oxidation with copper catalyst and hydrogen peroxide.

    Science.gov (United States)

    Kakinoki, Sachiro; Yamaoka, Tetsuji

    2015-04-15

    Immobilization of biologically active peptides which were isolated from extracellular matrix proteins is a powerful strategy for the design and functionalization of biomaterial substrates. However, the method of peptide immobilization was restricted, that is, peptide is often immobilized through the reactive groups inherent in substrates with multistep reactions. Here, we report a single-step immobilization of fibronectin-derived cell adhesive peptide (Arg-Glu-Asp-Val; REDV) onto polymer materials by use of tyrosine oxidation with copper catalyst and hydrogen peroxide. REDV peptide was successfully immobilized on tissue culture polystyrene, poly(ethylene terephthalate), poly(vinyl chloride), expanded-poly(tetrafluoroethylene), and poly(l-lactic acid), resulting in enhanced adhesion of human umbilical vein endothelial cells. This method is a single-step reaction under very mild conditions and is available for the biological functionalization of various medical devices.

  12. Two-dimensional iron-phthalocyanine (Fe-Pc) monolayer as a promising single-atom-catalyst for oxygen reduction reaction: a computational study

    Science.gov (United States)

    Wang, Yu; Yuan, Hao; Li, Yafei; Chen, Zhongfang

    2015-07-01

    Searching for low-cost non-Pt catalysts for oxygen reduction reaction (ORR) has been a key scientific issue in the development of fuel cells. In this work, the potential of utilizing the experimentally available two-dimensional (2D) Fe-phthalocyanine (Fe-Pc) monolayer with precisely-controlled distribution of Fe atoms as a catalyst of ORR was systematically explored by means of comprehensive density functional theory computations. The computations revealed that O2 molecules can be sufficiently activated on the surface of the Fe-Pc monolayer, and the subsequent ORR steps prefer to proceed on the Fe-Pc monolayer through a more efficient 4e pathway with a considerable limiting potential of 0.68 V. Especially, the Fe-Pc monolayer is more stable than the Fe-Pc molecule in acidic medium, and can present good catalytic performance for ORR on the addition of axial ligands. Therefore, the Fe-Pc monolayer is quite a promising single-atom-catalyst with high efficiency for ORR in fuel cells.Searching for low-cost non-Pt catalysts for oxygen reduction reaction (ORR) has been a key scientific issue in the development of fuel cells. In this work, the potential of utilizing the experimentally available two-dimensional (2D) Fe-phthalocyanine (Fe-Pc) monolayer with precisely-controlled distribution of Fe atoms as a catalyst of ORR was systematically explored by means of comprehensive density functional theory computations. The computations revealed that O2 molecules can be sufficiently activated on the surface of the Fe-Pc monolayer, and the subsequent ORR steps prefer to proceed on the Fe-Pc monolayer through a more efficient 4e pathway with a considerable limiting potential of 0.68 V. Especially, the Fe-Pc monolayer is more stable than the Fe-Pc molecule in acidic medium, and can present good catalytic performance for ORR on the addition of axial ligands. Therefore, the Fe-Pc monolayer is quite a promising single-atom-catalyst with high efficiency for ORR in fuel cells. Electronic

  13. Site-specific labeling of Saccharomyces cerevisiae ribosomes for single-molecule manipulations

    Science.gov (United States)

    Petrov, Alexey; Puglisi, Joseph D.

    2010-01-01

    Site-specific labeling of Escherichia coli ribosomes has allowed application of single-molecule fluorescence spectroscopy and force methods to probe the mechanism of translation. To apply these approaches to eukaryotic translation, eukaryotic ribosomes must be specifically labeled with fluorescent labels and molecular handles. Here, we describe preparation and labeling of the small and large yeast ribosomal subunits. Phylogenetically variable hairpin loops in ribosomal RNA are mutated to allow hybridization of oligonucleotides to mutant ribosomes. We demonstrate specific labeling of the ribosomal subunits, and their use in single-molecule fluorescence and force experiments. PMID:20501598

  14. Organometallic synthesis, reactivity and catalysis in the solid state using well-defined single-site species

    Science.gov (United States)

    Pike, Sebastian D.; Weller, Andrew S.

    2015-01-01

    Acting as a bridge between the heterogeneous and homogeneous realms, the use of discrete, well-defined, solid-state organometallic complexes for synthesis and catalysis is a remarkably undeveloped field. Here, we present a review of this topic, focusing on describing the key transformations that can be observed at a transition-metal centre, as well as the use of well-defined organometallic complexes in the solid state as catalysts. There is a particular focus upon gas–solid reactivity/catalysis and single-crystal-to-single-crystal transformations. PMID:25666064

  15. Sites of termination of in vitro DNA synthesis on psoralen phototreated single-stranded templates

    International Nuclear Information System (INIS)

    Piette, J.; Hearst, J.

    1985-01-01

    Single-stranded DNA has been photochemically induced to react with 4'-hydroxymethyl-4,5',8-trimethylpsoralen (HMT) and used as substrate for DNA replication with E. coli DNA polymerase I large fragment. By using the dideoxy sequencing procedure, it is possible to map the termination sites on the template photoreacted with HMT. These sites occur at the nucleotides preceding each thymine residue (and a few cytosine residues), emphasizing the fact that in a single-stranded stretch of DNA, HMT reacts with each thymine residue without any specificity regarding the flanking base sequence of the thymine residues. In addition, termination of DNA synthesis due to psoralen-adducted thymine is not influenced by the efficiency of the 3'-5' exonuclease proof-reading activity of the DNA polymerase. (author)

  16. Single-Site Tetracoordinated Aluminum Hydride Supported on Mesoporous Silica. From Dream to Reality!

    KAUST Repository

    Werghi, Baraa

    2016-09-26

    The reaction of mesoporous silica (SBA15) dehydroxylated at 700 °C with diisobutylaluminum hydride, i-Bu2AlH, gives after thermal treatment a single-site tetrahedral aluminum hydride with high selectivity. The starting aluminum isobutyl and the final aluminum hydride have been fully characterized by FT-IR, advanced SS NMR spectroscopy (1H, 13C, multiple quanta (MQ) 2D 1H-1H, and 27Al), and elemental analysis, while DFT calculations provide a rationalization of the occurring reactivity. Trimeric i-Bu2AlH reacts selectively with surface silanols without affecting the siloxane bridges. Its analogous hydride catalyzes ethylene polymerization. Indeed, catalytic tests show that this single aluminum hydride site is active in the production of a high-density polyethylene (HDPE). © 2016 American Chemical Society.

  17. An In Vitro Single-Primer Site-Directed Mutagenesis Method for Use in Biotechnology.

    Science.gov (United States)

    Huang, Yanchao; Zhang, Likui

    2017-01-01

    Site-directed mutagenesis is a powerful method to introduce mutation(s) into DNA sequences. A number of methods have been developed over the years with a main goal being to create a high number of mutant genes. The single-mutagenic primer method for site-directed mutagenesis is the most direct method that yields mutant genes in about 25-50 % of transformants in a robust, low-cost reaction. The supercompetent XL10-Gold bacteria used in the Stratagene protocol carry a phage, which may be a problem for some applications; however, in our single-mutagenic primer method the supercompetent bacteria are not needed. A thermostable DNA polymerase with high fidelity and processivity, such as Phusion DNA polymerase, is required for our optimized procedure to avoid extra mutation(s) and enhance mutagenic efficiency.

  18. Minimal invasive single-site surgery in colorectal procedures: Current state of the art

    Directory of Open Access Journals (Sweden)

    Diana Michele

    2011-01-01

    Full Text Available Background: Minimally invasive single-site (MISS surgery has recently been applied to colorectal surgery. We aimed to assess the current state of the art and the adequacy of preliminary oncological results. Methods: We performed a systematic review of the literature using Pubmed, Medline, SCOPUS and Web of Science databases. Keywords used were "Single Port" or "Single-Incision" or "LaparoEndoscopic Single Site" or "SILS™" and "Colon" or "Colorectal" and "Surgery". Results: Twenty-nine articles on colorectal MISS surgery have been published from July 2008 to July 2010, presenting data on 149 patients. One study reported analgesic requirement. The final incision length ranged from 2.5 to 8 cm. Only two studies reported fascial incision length. There were two port site hernias in a series of 13 patients (15.38%. Two "fully laparoscopic" MISS procedures with preparation and achievement of the anastomosis completely intracorporeally are reported. Future site of ileostomy was used as the sole access for the procedures in three studies. Lymph node harvesting, resection margins and length of specimen were sufficient in oncological cases. Conclusions: MISS colorectal surgery is a challenging procedure that seems to be safe and feasible, but the existing clinical evidence is limited. In selected cases, and especially when an ileostomy is planned, colorectal surgery may be an ideal indication for MISS surgery leading to a no-scar surgery. Despite preliminary oncological results showing the feasibility of MISS surgery, we want to stress the need to standardize the technique and carefully evaluate its application in oncosurgery under ethical committee control.

  19. Well-defined single-site monohydride silica-supported zirconium from azazirconacyclopropane

    KAUST Repository

    Hamzaoui, Bilel

    2015-01-13

    The silica-supported azazirconacyclopropane ≡SiOZr(HNMe2)(η2-NMeCH2)(NMe2) (1) leads exclusively under hydrogenolysis conditions (H2, 150°C) to the single-site monopodal monohydride silica-supported zirconium species ≡SiOZr(HNMe2)(NMe2)2H (2). Reactivity studies by contacting compound 2 with ethylene, hydrogen/ethylene, propene, or hydrogen/propene, at a temperature of 200°C revealed alkene hydrogenation.

  20. Candidate reagents and procedures for the dissolution of Hanford Site single-shell tank sludges

    International Nuclear Information System (INIS)

    Schulz, W.W.; Kupfer, M.J.

    1991-10-01

    At least some of the waste in the 149 single-shell tanks (SST) at the US Department of Energy (DOE) Hanford Site will be retrieved, treated, and disposed of. Although the importance of devising efficient and cost-effective sludge dissolution procedures has long been recognized, a concerted bench-scale effort to devise and test such procedures with actual solids representative of those in Hanford Site SSTs has not been performed. Reagents that might be used, either individually or serially, to dissolve sludges include HNO 3 , HNO 3 -oxalic acid, and HNO 3 -HF. This report consolidates and updates perspectives and recommendations concerning reagents and procedures for dissolving Hanford Site SST and selected double-shell tank (DST) sludges. The principal objectives of this report are as follows: (1) Compile and review existing experimental data on dissolution of actual Hanford Site SST and DST sludges. (2) Further inform Hanford Site engineers and scientists concerning the utility of combinations of thermally unstable complexants (TUCS) reagents and various reducing agents for dissolving SST and DST sludges. (This latter technology has recently been explored at the Argonne National Laboratory.) (3) Provide guidance in laying out a comprehensive experimental program to develop technology for dissolving all types of Hanford Site SST and DST sludges. 6 refs., 1 fig., 4 tabs

  1. Housing retention in single-site housing first for chronically homeless individuals with severe alcohol problems.

    Science.gov (United States)

    Collins, Susan E; Malone, Daniel K; Clifasefi, Seema L

    2013-12-01

    We studied housing retention and its predictors in the single-site Housing First model. Participants (n = 111) were chronically homeless people with severe alcohol problems who lived in a single-site Housing First program and participated in a larger nonrandomized controlled trial (2005-2008) conducted in Seattle, Washington. At baseline, participants responded to self-report questionnaires assessing demographic, illness burden, alcohol and other drug use, and psychiatric variables. Housing status was recorded over 2 years. Participants were interested in housing, although a sizable minority did not believe they would be able to maintain abstinence-based housing. Only 23% of participants returned to homelessness during the 2-year follow-up. Commonly cited risk factors--alcohol and other drug use, illness burden, psychiatric symptoms, and homelessness history--did not predict resumed homelessness. Active drinkers were more likely to stay in this housing project than nondrinkers. We found that single-site Housing First programming fills a gap in housing options for chronically homeless people with severe alcohol problems.

  2. Housing Retention in Single-Site Housing First for Chronically Homeless Individuals With Severe Alcohol Problems

    Science.gov (United States)

    Malone, Daniel K.; Clifasefi, Seema L.

    2013-01-01

    Objectives. We studied housing retention and its predictors in the single-site Housing First model. Methods. Participants (n = 111) were chronically homeless people with severe alcohol problems who lived in a single-site Housing First program and participated in a larger nonrandomized controlled trial (2005–2008) conducted in Seattle, Washington. At baseline, participants responded to self-report questionnaires assessing demographic, illness burden, alcohol and other drug use, and psychiatric variables. Housing status was recorded over 2 years. Results. Participants were interested in housing, although a sizable minority did not believe they would be able to maintain abstinence-based housing. Only 23% of participants returned to homelessness during the 2-year follow-up. Commonly cited risk factors—alcohol and other drug use, illness burden, psychiatric symptoms, and homelessness history—did not predict resumed homelessness. Active drinkers were more likely to stay in this housing project than nondrinkers. Conclusions. We found that single-site Housing First programming fills a gap in housing options for chronically homeless people with severe alcohol problems. PMID:24148063

  3. XRLINE, a program to evaluate the crystallite size of supported metal catalysts by single X-ray profile Fourier analysis

    International Nuclear Information System (INIS)

    Aldea, N.; Indrea, E.

    1990-01-01

    The computer program presented is based on the Fourier analysis of a singel X-ray diffraction profile. An X-ray diffraction method is presented which is capable of determining the average particle size, microstrain, stacking fault probability as well as the particle size distribution function in crystalline materials. The main numerical methods used are: (i) Smoothing and interpolation by 3rd-order piecewise polynomial functions or by cubic splines with the least squares method; (ii) numerical integration by successive five points formulae and numerical derivative by cubic splines with the least squares method; (iii) estimation of parameters by the weighted least squares method. The results for supported platinum catalysts used in the H/D isotopic exchange reaction are illustrated. (orig.)

  4. Modeling intraparticle transports during propylene polymerizations using supported metallocene and dual function metallocene as catalysts: Single particle model

    Directory of Open Access Journals (Sweden)

    Li Hua-Rong

    2014-01-01

    Full Text Available Two improved multigrain models (MGMs for preparing homopolypropylene and long chain branched polypropylene via propylene polymerization using silica-supported metallocene or dual function metallocene as catalysts are presented in this paper. The presented models are used to predict the intraparticle flow fields involved in the polymerizations. The simulation results show that the flow field distributions involve dare basically identical. The results also show that both the two polymerization processes have an initiation stage and the controlling step for them is reaction-diffusion-reaction with the polymerization proceeding. Furthermore, the simulation results show that the intra particle mass transfer resistance has significant effect on the polymerization but the heat transfer resistance can be ignored.

  5. Aerobic Oxidation of Cyclohexane on Catalysts Based on Twinned and Single-Crystal Au75Pd25 Bimetallic Nanocrystals.

    Science.gov (United States)

    Wang, Liangbing; Zhao, Songtao; Liu, Chenxuan; Li, Chen; Li, Xu; Li, Hongliang; Wang, Youcheng; Ma, Chao; Li, Zhenyu; Zeng, Jie

    2015-05-13

    Bimetallic Au75Pd25 nanocrystals with shapes of icosahedron and octahedron were synthesized by adding different amounts of iodide ions, and were employed as catalysts for solvent-free aerobic oxidation of cyclohexane. Although both icosahedrons and octahedrons were bounded by {111} facets, the turnover frequency number of Au75Pd25 icosahedrons reached 15,106 h(-1), almost three times as high as that of Au75Pd25 octahedrons. The conversion of cyclohexane reached 28.1% after 48 h using Au75Pd25 icosahedrons, with the selectivity of 84.3% to cyclohexanone. Density functional theory calculations along with X-ray photoelectron spectroscopy examinations reveal that the excellent catalytic performance of AuPd icosahedrons could be ascribed to twin-induced strain and highly negative charge density of Au atoms on the surface.

  6. Single-Base Pair Genome Editing in Human Cells by Using Site-Specific Endonucleases

    Directory of Open Access Journals (Sweden)

    Hiroshi Ochiai

    2015-09-01

    Full Text Available Genome-wide association studies have identified numerous single-nucleotide polymorphisms (SNPs associated with human diseases or phenotypes. However, causal relationships between most SNPs and the associated disease have not been established, owing to technical challenges such as unavailability of suitable cell lines. Recently, efficient editing of a single base pair in the genome was achieved using programmable site-specific nucleases. This technique enables experimental confirmation of the causality between SNPs and disease, and is potentially valuable in clinical applications. In this review, I introduce the molecular basis and describe examples of single-base pair editing in human cells. I also discuss the challenges associated with the technique, as well as possible solutions.

  7. Single-site robotic cholecystectomy (SSRC) versus single-incision laparoscopic cholecystectomy (SILC): comparison of learning curves. First European experience.

    Science.gov (United States)

    Spinoglio, Giuseppe; Lenti, Luca Matteo; Maglione, Valeria; Lucido, Francesco Saverio; Priora, Fabio; Bianchi, Paolo Pietro; Grosso, Federica; Quarati, Raul

    2012-06-01

    Single-incision laparoscopic surgery is an emerging procedure developed to decrease parietal trauma and improve cosmetic results. However, many technical constraints, such as lack of triangulation, instrument collisions, and cross-handing, hamper this approach. Using a robotic platform may overcome these problems and enable more precise surgical actions by increasing freedom of movement and by restoring intuitive instrument control. We retrospectively collected, under institutional review board approval, data on the first 25 patients who underwent single-site robotic cholecystectomies (SSRC) at our center. Patients enrolled in this study underwent SSRC for symptomatic biliary gallstones or polyposis. Exclusion criteria were: BMI > 33; acute cholecystitis; previous upper abdominal surgery; ASA > II; and age >80 and <18 years. All procedures were performed with the da Vinci Si Surgical System and a dedicated SSRC kit (Intuitive). After discharge, patients were followed for 2 months. These SSRC cases were compared to our first 25 single-incision laparoscopic cholecystectomies (SILC) and with the literature. There were no differences in patient characteristics between groups (gender, P = 0.4404; age, P = 0.7423; BMI, P = 0.5699), and there were no conversions or major complications in either cohort. Operative time was significantly longer for the SILC group compared with SSRC (83.2 vs. 62.7 min, P = 0.0006), and SSRC operative times did not change significantly along the series. The majority of patients in each group were discharged within 24 h, with an average length of hospital stay of 1.2 days for the SILC group and 1.1 days for the SSRC group (P = 0.2854). No wound complications (infection, incisional hernia) were observed in the SSRC group and in the SILC. Our preliminary experience shows that SSRC is safe, can easily be learned, and performed in a reproducible manner and is faster than SILC.

  8. Steam reforming of methane over Pt/Rh based wire mesh catalyst in single channel reformer for small scale syngas production

    DEFF Research Database (Denmark)

    Sigurdsson, Haftor Örn; Kær, Søren Knudsen

    2012-01-01

    of a catalytic parallel plate type heat exchanger (CPHE) reformer stack, where coated Pt/Rh based wire mesh is used as a catalyst. Heat is supplied to the endothermic reaction with infrared electric heaters. All the experiments were performed under atmospheric pressure and at stable operating conditions......The purpose of this study is to investigate a small scale steam methane reformer for syngas production for a micro combined heat and power (mCPH) unit under different operational conditions. The study presents an experimental analysis of the performance of a specially built single channel...... to evaluate the effect of flow maldistribution in a CPHE reformer stack on the CH4 conversion and H2 yield....

  9. Pt atoms stabilized on hexagonal boron nitride as efficient single-atom catalysts for CO oxidation: A first-principles investigation

    KAUST Repository

    Liu, Xin

    2015-01-01

    Taking CO oxidation as a probe, we investigated the electronic structure and reactivity of Pt atoms stabilized by vacancy defects on hexagonal boron nitride (h-BN) by first-principles-based calculations. As a joint effect of the high reactivity of both a single Pt atom and a boron vacancy defect (PtBV), the Pt-N interaction is -4.40 eV and is already strong enough to prohibit the diffusion and aggregation of the stabilized Pt atom. Facilitated by the upshifted Pt-d states originated from the Pt-N interaction, the barriers for CO oxidation through the Langmuir-Hinshelwood mechanism for formation and dissociation of peroxide-like intermediate and the regeneration are as low as 0.38, 0.10 and 0.04 eV, respectively, suggesting the superiority of PtBV as a catalyst for low temperature CO oxidation.

  10. Clinical evaluation of implant survival based on size and site of placement: A retrospective study of immediate implants at single rooted teeth sites

    OpenAIRE

    Ramalingam, Sundar; Al-Hindi, Maryam; Al-Eid, Raniah Abdullah; Nooh, Nasser

    2015-01-01

    Objectives: This retrospective clinical study sought to evaluate the survival of immediate implants placed at maxillary and mandibular single-rooted tooth extraction sites and to determine the relationship among implant size, placement site, and implant survival. Methods: Between January 2010 and June 2011, 85 patients (33 males, 52 females; mean age: 45 years) underwent immediate implant placement after extraction of single-rooted teeth. All implants were restored between 12 and 14 weeks ...

  11. A green recyclable SO(3)H-carbon catalyst derived from glycerol for the production of biodiesel from FFA-containing karanja (Pongamia glabra) oil in a single step.

    Science.gov (United States)

    Prabhavathi Devi, B L A; Vijai Kumar Reddy, T; Vijaya Lakshmi, K; Prasad, R B N

    2014-02-01

    Simultaneous esterification and transesterification method is employed for the preparation of biodiesel from 7.5% free fatty acid (FFA) containing karanja (Pongamia glabra) oil using water resistant and reusable carbon-based solid acid catalyst derived from glycerol in a single step. The optimum reaction parameters for obtaining biodiesel in >99% yield by simultaneous esterification and transesterification are: methanol (1:45 mole ratio of oil), catalyst 20wt.% of oil, temperature 160°C and reaction time of 4h. After the reaction, the catalyst was easily recovered by filtration and reused for five times with out any deactivation under optimized conditions. This single-step process could be a potential route for biodiesel production from high FFA containing oils by simplifying the procedure and reducing costs and effluent generation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Single-Molecule Fluorescence Microscopy Reveals Local Diffusion Coefficients in the Pore Network of an Individual Catalyst Particle

    NARCIS (Netherlands)

    Hendriks, Frank|info:eu-repo/dai/nl/412642697; Meirer, Florian; Kubarev, Alexey V.; Ristanovic, Zoran|info:eu-repo/dai/nl/328233005; Roeffaers, Maarten B J; Vogt, Eelco T. C.|info:eu-repo/dai/nl/073717398; Bruijnincx, Pieter C. A.|info:eu-repo/dai/nl/33799529X; Weckhuysen, Bert M.|info:eu-repo/dai/nl/285484397

    2017-01-01

    We used single-molecule fluorescence microscopy to study self-diffusion of a feedstock-like probe molecule with nanometer accuracy in the macropores of a micrometer-sized, real-life fluid catalytic cracking (FCC) particle. Movies of single fluorescent molecules allowed their movement through the

  13. The mechanism of stereospecific C-H oxidation by Fe(Pytacn) complexes: bioinspired non-heme iron catalysts containing cis-labile exchangeable sites.

    Science.gov (United States)

    Prat, Irene; Company, Anna; Postils, Verònica; Ribas, Xavi; Que, Lawrence; Luis, Josep M; Costas, Miquel

    2013-05-17

    A detailed mechanistic study of the hydroxylation of alkane C-H bonds using H2O2 by a family of mononuclear non heme iron catalysts with the formula [Fe(II)(CF3SO3)2(L)] is described, in which L is a tetradentate ligand containing a triazacyclononane tripod and a pyridine ring bearing different substituents at the α and γ positions, which tune the electronic or steric properties of the corresponding iron complexes. Two inequivalent cis-labile exchangeable sites, occupied by triflate ions, complete the octahedral iron coordination sphere. The C-H hydroxylation mediated by this family of complexes takes place with retention of configuration. Oxygen atoms from water are incorporated into hydroxylated products and the extent of this incorporation depends in a systematic manner on the nature of the catalyst, and the substrate. Mechanistic probes and isotopic analyses, in combination with detailed density functional theory (DFT) calculations, provide strong evidence that C-H hydroxylation is performed by highly electrophilic [Fe(V)(O)(OH)L] species through a concerted asynchronous mechanism, involving homolytic breakage of the C-H bond, followed by rebound of the hydroxyl ligand. The [Fe(V)(O)(OH)L] species can exist in two tautomeric forms, differing in the position of oxo and hydroxide ligands. Isotopic-labeling analysis shows that the relative reactivities of the two tautomeric forms are sensitively affected by the α substituent of the pyridine, and this reactivity behavior is rationalized by computational methods. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Seasonal Variability of Aerosol Single Scattering Albedo at Biomass Burning Sites in Southern Africa and Amazonia

    Science.gov (United States)

    Eck, T. F.; Holben, B. N.; Mukelabai, M. M.; Dubovik, O.; Smirnov, A.; Schafer, J. S.; Slutsker, I.

    2002-05-01

    Monitoring of the optical properties of primarily biomass burning aerosols in Mongu, Zambia was initiated in 1995, when an AERONET sun/sky radiometer site was established at the Mongu airport. For the biomass burning season months (July-November), we present monthly means of aerosol single scattering albedo (SSA), aerosol size distributions, and refractive indices from almucantar sky scan retrievals utilizing the algorithm of Dubovik and King (2000). The monthly mean single scattering albedo at 440 nm in Mongu was found to increase significantly from July (0.845) to October (0.93). The slope of the spectral dependence of aerosol single scattering albedo with wavelength decreased as SSA increased from July to October. However, there was no significant change in particle size in either the dominant accumulation or secondary coarse modes during these months. Similarly, seasonal SSA retrievals for Etosha Pan, Namibia also show increasing values through the burning season in 2000. We also analyze the seasonality of SSA for sites in biomass burning regions of Amazonia. We show maps of satellite detected fire counts which indicate that the regions of primary biomass burning shift significantly from July to October. Possible reasons for the seasonal changes in observed SSA include differences in aging to due transport speed and distance from source regions, differences in biomass fuel types in different regions (fraction of woody biomass versus grasses), and differences in fuel moisture content (October is the beginning of the rainy season on both continents).

  15. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    Science.gov (United States)

    Ginosar, Daniel M.; Petkovic, Lucia M.

    2010-12-28

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  16. Seasonal Trend of Aerosol Single Scattering Albedo at Biomass Burning Sites in Southern Africa

    Science.gov (United States)

    Eck, T. F.; Holben, B. N.; Reid, J. S.; Ward, D.; Mukelabai, M. M.; Piketh, S.; Hyer, E. J.; Dubovik, O.; Sinyuk, A.; Schafer, J. S.; Giles, D. M.; Smirnov, A.; Slutsker, I.

    2011-12-01

    A database of the optical properties of primarily biomass burning aerosols in Mongu, Zambia from multi-year monitoring at an AERONET sun-sky radiometer site was examined. For the biomass burning season months (July-November), we investigate the aerosol single scattering albedo (SSA), aerosol size distributions, and refractive indices from almucantar sky scan retrievals utilizing the algorithm of Dubovik and King (2000). The monthly mean single scattering albedo at 440 nm in Mongu was found to increase significantly from ~0.84 in July to ~0.93 in November (from 0.78 to 0.90 at 675 nm in these same months). There was no significant change in particle size, in either the dominant accumulation or secondary coarse modes during these months, nor any significant trend in the Angstrom Exponent (440-870 nm; r2=0.02). A significant downward seasonal trend in imaginary refractive index (r2=0.43) suggests a trend of decreasing black carbon content in the aerosol composition as the burning season progresses. Similarly, seasonal SSA retrievals for both the Etosha Pan, Namibia and Skukuza, South Africa AERONET sites also show increasing single scattering albedo values through the burning season. We show maps of satellite detected fire counts, which indicate that the regions of primary biomass burning in southern Africa shift significantly from July to October. Possible reasons for the seasonal changes in observed SSA include differences in biomass fuel types in different regions and seasons (fraction of woody biomass versus grasses), agricultural practices (Chitemene: in which woody fuels are burned at the end of the dry season), differences in fuel moisture content (as mid-October is the typical beginning of the rainy season) and differences in aging due to transport speed and distance from varying source regions. We also analyze the seasonality of SSA for sites in biomass burning regions of southern Amazonia, where no significant seasonal trend in SSA was detected.

  17. Left Transperitoneal Adrenalectomy with a Laparoendoscopic Single-Site Surgery Combined Technique: Initial Case Reports

    Directory of Open Access Journals (Sweden)

    Yasuhiro Sumino

    2011-01-01

    Full Text Available Laparoendoscopic single-site surgery (LESS is a step toward the development of minimally invasive surgery. It is initially difficult for surgeons with limited experience to perform the surgery. We describe two cases of left adrenalectomy with a LESS combined with the addition of an accessory port. After a 2.5-cm skin incision was made at the level of the paraumbilicus to insert the primary 12-mm trocar for the laparoscope, a 5-mm nonbladed trocar was placed through the skin incision side-by-side with the primary trocar. A second 3-mm nonbladed trocar was then placed along the anterior axillary line; a multichannel trocar was not used as a single port. Both adrenalectomies were completed successfully. In patients with a minor adrenal tumor, a combined technique using LESS and an additional port is easier than LESS alone and may, therefore, be a bridge between the conventional laparoscopic approach and LESS.

  18. Laparoendoscopic Single-Site Surgery (LESS for a Large Ovarian Tumour: First Clinical Case Report

    Directory of Open Access Journals (Sweden)

    Yao Dong Chua

    2011-01-01

    Main Outcome Measure(s. Conversion to standard laparoscopic technique or laparotomy, estimated blood loss, operative time , extent of scarring, occurrence of intra- and perioperative surgical complications, technical adequacy, and clinical outcome. Result(s. No conversion to standard laparoscopic technique or laparotomy, and no intraoperative or postoperative complications were observed. Total operative time was 99 minutes. The patient was discharged home on postoperative day one. Conclusion(s. Laparoendoscopic single-site bilateral salpingo-oophorectomy of a large ovarian tumour is feasible with standard laparoscopic instruments. It is safe and effective, with good results in terms of excellent cosmesis and minimal postoperative pain.

  19. Large zeolite H-ZSM-5 crystals as models for the methanol-to-hydrocarbons process: bridging the gap between single-particle examination and bulk catalyst analysis.

    Science.gov (United States)

    Hofmann, Jan P; Mores, Davide; Aramburo, Luis R; Teketel, Shewangizaw; Rohnke, Marcus; Janek, Jürgen; Olsbye, Unni; Weckhuysen, Bert M

    2013-06-24

    The catalytic, deactivation, and regeneration characteristics of large coffin-shaped H-ZSM-5 crystals were investigated during the methanol-to-hydrocarbons (MTH) reaction at 350 and 500 °C. Online gas-phase effluent analysis and examination of retained material thereof were used to explore the bulk properties of large coffin-shaped zeolite H-ZSM-5 crystals in a fixed-bed reactor to introduce them as model catalysts for the MTH reaction. These findings were related to observations made at the individual particle level by using polarization-dependent UV-visible microspectroscopy and mass spectrometric techniques after reaction in an in situ microspectroscopy reaction cell. Excellent agreement between the spectroscopic measurements and the analysis of hydrocarbon deposits by means of retained hydrocarbon analysis and time-of-flight secondary-ion mass spectrometry of spent catalyst materials was observed. The obtained data reveal a shift towards more condensed coke deposits on the outer zeolite surface at higher reaction temperatures. Zeolites in the fixed-bed reactor setup underwent more coke deposition than those reacted in the in situ microspectroscopy reaction cell. Regeneration studies of the large zeolite crystals were performed by oxidation in O2 /inert gas mixtures at 550 °C. UV-visible microspectroscopic measurements using the oligomerization of styrene derivatives as probe reaction indicated that the fraction of strong acid sites decreased during regeneration. This change was accompanied by a slight decrease in the initial conversion obtained after regeneration. H-ZSM-5 deactivated more rapidly at higher reaction temperature. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Mechanistic studies aimed at the development of single site metal alkoxide catalysts for the production of polyoxygenates from renewable resources.

    Energy Technology Data Exchange (ETDEWEB)

    Chisholm, Malcolm H. [The Ohio State Univ., Columbus, OH (United States)

    2015-12-15

    The work proposed herein follows on directly from the existing 3 year grant and the request for funding is for 12 months to allow completion of this work and graduation of current students supported by DOE. The three primary projects are as follows. 1.) A comparative study of the reactivity of LMg(OR) (solvent), where L= a β-diiminate or pyrromethene ligand, in the ring-opening of cyclic esters. 2.) The homopolymerization of expoxides, particularly propylene oxide and styrene oxide, and their copolymerizations with carbon dioxide or organic anhydrides to yield polycarbonates or polyesters, respectively. 3.) The development of well-defined bismuth (III) complexes for ring-opening polymerizations that are tolerant of both air and water. In each of these topics special emphasis is placed on developing a detailed mechanistic understanding of the ring-opening event and how this is modified by the employment of specific metal and ligand combinations. This document also provides a report on findings of the past grant period that are not yet in the public domain/published and shows how the proposed work will bring the original project to conclusion.

  1. Non-PGM cell catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Colon-Mercado, H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Elvington, M. [Savannah River Consulting, Aiken, SC (United States); Ganesan, P. [Savannah River Consulting, Aiken, SC (United States)

    2017-09-27

    A unique approach has been developed to probe the non-PGM catalyst active site for the Oxygen Reduction Reaction (ORR) for PEMFCs. Iron based functionalities have been engineered into a variety of catalysts to evaluate their impact on activity for the ORR. A series of high surface area catalysts were synthesized and the impact of the chemical structure on the electrochemical and electrocatalytic properties was investigated. Elemental and surface analyses of the prepared catalysts reveal the incorporation of iron in a targeted and controlled manner. A high surface area framework catalyst was prepared that shows exceptional activity, comparable to state-of-the-art materials. The results of this research project provided critical seed data for the newly awarded ElectroCat project, which focuses on rationally designed framework catalysts for the oxygen reduction reaction.

  2. Performance analysis of high frequency single-site-location antenna arrays using numerical electromagnetic modeling

    Science.gov (United States)

    Schiantarelli, Harry T.

    1990-09-01

    Electronic support measures (ESM) systems play an increasingly important role in modern warfare and can influence the outcome of a military engagement. The application of ESM can be extended to anti-guerrilla and anti-drug operations where law enforcement agencies can exploit the fact that their presence is inducing the outlaw to depend more on radio communications to coordinate their activities. When a propagation path of no more than one reflection at the ionosphere (1-hop) can be assumed, position of an HF emitter can be determined by a single observing site using vertical triangulation, provided that the height of the ionosphere at the point where the radio wave is reflected, can be determined. This technique is known as high frequency direction finding single-site-location (HFDF SSL). This thesis analyzes the HFDF SSL error in measuring the direction of arrival of the signal, how this error is generated by the antenna array and its effect on emitter location. The characteristics of the two antenna arrays used by a specific HFDF SSL system that implements the phase-interferometer techniques were studied using electromagnetic modeling.

  3. Immediate loading of single SLA implants: drilling vs. osteotomes for the preparation of the implant site.

    Science.gov (United States)

    Stavropoulos, Andreas; Nyengaard, Jens R; Lang, Niklaus P; Karring, Thorkild

    2008-01-01

    To evaluate whether or not preparation of the implant site with osteotomes instead of drilling may improve peri-implant bone density and/or osseointegration, and whether or not this further improves the predictability of immediate loading of SLA implants. The second, third, and fourth premolars were extracted in both sides of the mandible in six dogs, and after at least 3 months four SLA implants were inserted into each side of the jaw. In three animals, the implant sites were prepared by means of osteotomes, while standard stepwise drilling was used in the remaining animals. In each side of the jaw, two non-adjacent implants were restored with single crowns 4 days after installation, while the remaining two implants were left without crowns to serve as non-loaded controls. After 2, 4, or 12 weeks of loading, specimens including the implants and surrounding tissues were obtained and processed for histologic analysis of undecalcified sections. All implants placed with osteotomes were lost (five before delivery of the crowns and the rest during the first week after loading). None of the conventionally inserted implants, however, was lost, and histomorphometrical analysis revealed similar soft- and hard peri-implant tissue characteristics at immediately loaded and non-loaded implants at all observation times. Average bone-to-implant contact was 59-72% at immediately loaded implants vs. 60-63% at non-loaded ones. Preparation of the implant site by means of osteotomes had a deleterious effect on osseointegration, while immediate loading of single, free-standing, SLA implants following a conventional surgical protocol did not jeopardize their osseointegration.

  4. Ground state properties of a spin chain within Heisenberg model with a single lacking spin site

    International Nuclear Information System (INIS)

    Mebrouki, M.

    2011-01-01

    The ground state and first excited state energies of an antiferromagnetic spin-1/2 chain with and without a single lacking spin site are computed using exact diagonalization method, within the Heisenberg model. In order to keep both parts of a spin chain with a lacking site connected, next nearest neighbors interactions are then introduced. Also, the Density Matrix Renormalization Group (DMRG) method is used, to investigate ground state energies of large system sizes; which permits us to inquire about the effect of large system sizes on energies. Other quantum quantities such as fidelity and correlation functions are also studied and compared in both cases. - Research highlights: → In this paper we compute ground state and first excited state energies of a spin chain with and without a lacking spin site. The next nearest neighbors are introduced with the antiferromagnetic Heisenberg spin-half. → Exact diagonalization is used for small systems, where DMRG method is used to compute energies for large systems. Other quantities like quantum fidelity and correlation are also computed. → Results are presented in figures with comments. → E 0 /N is computed in a function of N for several values of J 2 and for both systems. First excited energies are also investigated.

  5. Compact teleoperated laparoendoscopic single-site robotic surgical system: Kinematics, control, and operation.

    Science.gov (United States)

    Isaac-Lowry, Oran Jacob; Okamoto, Steele; Pedram, Sahba Aghajani; Woo, Russell; Berkelman, Peter

    2017-12-01

    To date a variety of teleoperated surgical robotic systems have been developed to improve a surgeon's ability to perform demanding single-port procedures. However typical large systems are bulky, expensive, and afford limited angular motion, while smaller designs suffer complications arising from limited motion range, speed, and force generation. This work was to develop and validate a simple, compact, low cost single site teleoperated laparoendoscopic surgical robotic system, with demonstrated capability to carry out basic surgical procedures. This system builds upon previous work done at the University of Hawaii at Manoa and includes instrument and endoscope manipulators as well as compact articulated instruments designed to overcome single incision geometry complications. A robotic endoscope holder was used for the base, with an added support frame for teleoperated manipulators and instruments fabricated mostly from 3D printed parts. Kinematics and control methods were formulated for the novel manipulator configuration. Trajectory following results from an optical motion tracker and sample task performance results are presented. Results indicate that the system has successfully met the goal of basic surgical functionality while minimizing physical size, complexity, and cost. Copyright © 2017 John Wiley & Sons, Ltd.

  6. SEM-induced shrinkage and site-selective modification of single-crystal silicon nanopores

    Science.gov (United States)

    Chen, Qi; Wang, Yifan; Deng, Tao; Liu, Zewen

    2017-07-01

    Solid-state nanopores with feature sizes around 5 nm play a critical role in bio-sensing fields, especially in single molecule detection and sequencing of DNA, RNA and proteins. In this paper we present a systematic study on shrinkage and site-selective modification of single-crystal silicon nanopores with a conventional scanning electron microscope (SEM). Square nanopores with measurable sizes as small as 8 nm × 8 nm and rectangle nanopores with feature sizes (the smaller one between length and width) down to 5 nm have been obtained, using the SEM-induced shrinkage technique. The analysis of energy dispersive x-ray spectroscopy and the recovery of the pore size and morphology reveal that the grown material along with the edge of the nanopore is the result of deposition of hydrocarbon compounds, without structural damage during the shrinking process. A simplified model for pore shrinkage has been developed based on observation of the cross-sectional morphology of the shrunk nanopore. The main factors impacting on the task of controllably shrinking the nanopores, such as the accelerating voltage, spot size, scanned area of e-beam, and the initial pore size have been discussed. It is found that single-crystal silicon nanopores shrink linearly with time under localized irradiation by SEM e-beam in all cases, and the pore shrinkage rate is inversely proportional to the initial equivalent diameter of the pore under the same e-beam conditions.

  7. Stereospecific olefin polymerization with chiral metallocene catalysts

    OpenAIRE

    Brintzinger, Hans-Herbert; Fischer, David; Mülhaupt, Rolf; Rieger, Bernhard; Waymouth, Robert M.

    1995-01-01

    Current studies on novel, metallocenebased catalysts for the polymerization of α-olefins have far-reaching implications for the development of new materials as well as for the understanding of basic reaction mechanisms responsible for the growth of a polymer chain at a catalyst center and the control of its stereoregularity. In contrast to heterogeneous Ziegler–Natta catalysts, polymerization by a homogeneous, metallocene-based catalyst occurs principally at a single type of metal center with...

  8. Spectroscopic characterization of a green copper site in a single-domain cupredoxin.

    Science.gov (United States)

    Roger, Magali; Biaso, Frédéric; Castelle, Cindy J; Bauzan, Marielle; Chaspoul, Florence; Lojou, Elisabeth; Sciara, Giuliano; Caffarri, Stefano; Giudici-Orticoni, Marie-Thérèse; Ilbert, Marianne

    2014-01-01

    Cupredoxins are widespread copper-binding proteins, mainly involved in electron transfer pathways. They display a typical rigid greek key motif consisting of an eight stranded β-sandwich. A fascinating feature of cupredoxins is the natural diversity of their copper center geometry. These geometry variations give rise to drastic changes in their color, such as blue, green, red or purple. Based on several spectroscopic and structural analyses, a connection between the geometry of their copper-binding site and their color has been proposed. However, little is known about the relationship between such diversity of copper center geometry in cupredoxins and possible implications for function. This has been difficult to assess, as only a few naturally occurring green and red copper sites have been described so far. We report herein the spectrocopic characterization of a novel kind of single domain cupredoxin of green color, involved in a respiratory pathway of the acidophilic organism Acidithiobacillus ferrooxidans. Biochemical and spectroscopic characterization coupled to bioinformatics analysis reveal the existence of some unusual features for this novel member of the green cupredoxin sub-family. This protein has the highest redox potential reported to date for a green-type cupredoxin. It has a constrained green copper site insensitive to pH or temperature variations. It is a green-type cupredoxin found for the first time in a respiratory pathway. These unique properties might be explained by a region of unknown function never found in other cupredoxins, and by an unusual length of the loop between the second and the fourth copper ligands. These discoveries will impact our knowledge on non-engineered green copper sites, whose involvement in respiratory chains seems more widespread than initially thought.

  9. Spectroscopic characterization of a green copper site in a single-domain cupredoxin.

    Directory of Open Access Journals (Sweden)

    Magali Roger

    Full Text Available Cupredoxins are widespread copper-binding proteins, mainly involved in electron transfer pathways. They display a typical rigid greek key motif consisting of an eight stranded β-sandwich. A fascinating feature of cupredoxins is the natural diversity of their copper center geometry. These geometry variations give rise to drastic changes in their color, such as blue, green, red or purple. Based on several spectroscopic and structural analyses, a connection between the geometry of their copper-binding site and their color has been proposed. However, little is known about the relationship between such diversity of copper center geometry in cupredoxins and possible implications for function. This has been difficult to assess, as only a few naturally occurring green and red copper sites have been described so far. We report herein the spectrocopic characterization of a novel kind of single domain cupredoxin of green color, involved in a respiratory pathway of the acidophilic organism Acidithiobacillus ferrooxidans. Biochemical and spectroscopic characterization coupled to bioinformatics analysis reveal the existence of some unusual features for this novel member of the green cupredoxin sub-family. This protein has the highest redox potential reported to date for a green-type cupredoxin. It has a constrained green copper site insensitive to pH or temperature variations. It is a green-type cupredoxin found for the first time in a respiratory pathway. These unique properties might be explained by a region of unknown function never found in other cupredoxins, and by an unusual length of the loop between the second and the fourth copper ligands. These discoveries will impact our knowledge on non-engineered green copper sites, whose involvement in respiratory chains seems more widespread than initially thought.

  10. Single-site ventricular pacing via the coronary sinus in patients with tricuspid valve disease.

    Science.gov (United States)

    Noheria, Amit; van Zyl, Martin; Scott, Luis R; Srivathsan, Komandoor; Madhavan, Malini; Asirvatham, Samuel J; McLeod, Christopher J

    2017-03-01

    To evaluate coronary sinus single-site (CSSS) left ventricular pacing in adult patients with normal left ventricular ejection fraction (LVEF) when traditional right ventricular lead implantation is not feasible or is contraindicated. We performed a retrospective analysis of 23 patients with tricuspid valve surgery/disease who received a CSSS ventricular pacing lead to avoid crossing the tricuspid valve. Two matched control populations were obtained from patients receiving (i) conventional right ventricular single-site (RVSS) leads and (ii) coronary sinus leads for cardiac resynchronization therapy (CSCRT). Main outcomes of interest were lead stability, electrical lead parameters and change in LVEF during long-term follow-up. Successful CSSS pacing was accomplished in all 23 patients without any procedural complications. During the 5.3 ± 2.8-year follow-up 22/23 (95.7%) leads were functional with stable pacing and sensing parameters, and 1/23 (4.3%) was extracted for unrelated reasons. Compared to CSSS leads, the lead revision/abandonment was similar with RVSS leads (Hazard ratio (HR) 0.87, 95% confidence interval (CI) 0.03, 22.0), but was higher with CSCRT leads (HR 7.41, 95% CI 1.30, 139.0). There was no difference in change in LVEF between CSSS and RVSS groups (-2.4 ± 11.0 vs. 1.5 ± 12.8, P = 0.76), but LVEF improved in CSCRT group (11.2 ± 16.5%, P = 0.002). Fluoroscopy times were longer during implantation of CSSS compared to RVSS leads (25.6 ± 24.6 min vs. 12.3 ± 18.6 min, P = 0.049). In patients with normal LVEF, single-site ventricular pacing via the coronary sinus is a feasible, safe and reliable alternative to right ventricular pacing. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions, please email: journals.permissions@oup.com.

  11. Analytic observations for the d=1+ 1 bridge site (or single-step) deposition model

    International Nuclear Information System (INIS)

    Evans, J.W.; Kang, H.C.

    1991-01-01

    Some exact results for a reversible version of the d=1+1 bridge site (or single-step) deposition model are presented. Exact steady-state properties are determined directly for finite systems with various mean slopes. These show explicitly how the asymptotic growth velocity and fluctuations are quenched as the slope approaches its maximum allowed value. Next, exact hierarchial equations for the dynamics are presented. For the special case of ''equilibrium growth,'' these are analyzed exactly at the pair-correlation level directly for an infinite system. This provided further insight into asymptotic scaling behavior. Finally, the above hierarchy is compared with one generated from a discrete form of the Kardar--Parisi--Zhang equations. Some differences are described

  12. Siting analysis and risk assessment for small single-purpose heating reactors

    International Nuclear Information System (INIS)

    Tarjanne, R.

    1979-04-01

    Two alternative sites both 10km away from the centre of Helsinki are considered for reactor unit sizes of 400mw and 800mw. The risks associated with a small single-purpose heating reactor is evaluated for normal operation and accident conditions. The evaluation for accident condition is performed for three characteristics accidents. Three pathways are considered in the calculation of the radiation exposure: direct external gamma dose from the release plume, direct gamma radiation from deposited activity on the ground and dose due to inhalation. The risks are compared with the risks from alternative conventional fossil fuelled district heat production methods. The results show that the heating reactor alternative causes an unsignificant risk, which is far less than the risk caused by the fossil-fuelled alternatives

  13. Management of gallbladder duplication using a single-site robotic-assisted approach: a case study.

    Science.gov (United States)

    Boyle, Melanie Adams; Kaplin, Aviva Wallace; Kushnir, Leon; Montero-Pearson, Per

    2016-06-01

    Gallbladder duplication is a rare congenital anomaly. Here, we describe a 29-year-old female who presents with classic symptoms of biliary colic. A duplicated gallbladder was recognized on preoperative ultrasound. This case report reviews a single-site robotic-assisted cholecystectomy with a cystic duct duplication. The patient underwent the surgery without complication. Due to the aberrant anatomy of the cystic triangle, it was decided to mobilize the gallbladder in a dome-down fashion. True gallbladder duplication can be categorized according to cystic duct orientation based on Boyden's classification. Preoperative diagnosis is essential to prevent surgical complications. A laparoscopic approach can be carried out safely in the hands of a skilled surgeon. This case report shows that the robotic-assisted surgical approach is a viable and safe alternative.

  14. Patients' perceptions of laparoendoscopic single-site surgery: the cosmetic effect.

    Science.gov (United States)

    Golkar, Farhaad C; Ross, Sharona B; Sperry, Steffanie; Vice, Michelle; Luberice, Kenneth; Donn, Natalie; Morton, Connor; Hernandez, Jonathan M; Rosemurgy, Alexander S

    2012-11-01

    Laparoendoscopic single-site (LESS) surgery can be performed without apparent scarring, while maintaining the salutary benefits of conventional laparoscopic surgery. The purpose of this study was to compare patients' preoperative and postoperative perceptions of LESS surgery. Before and after undergoing LESS surgery, 120 patients were given questionnaires; their responses were assimilated and analyzed. Of 120 patients, 62% were female (age, 52 ± 16.6 y), and 54% had prior abdominal surgery. Preoperatively, women and older patients reported heightened appearance dissatisfaction. Preoperatively, most patients would not accept more risk, pain, surgery/recovery times, and/or costs than associated with standard laparoscopy. Postoperatively, patients reported increased satisfaction in their overall and abdominal region appearance. Satisfaction was noted by 92%; satisfaction was related significantly to scar appearance and cosmesis. Preoperatively, patients were most concerned with safety; postoperatively, patients' concerns shifted to cosmetic outcome. LESS surgery provides an opportunity for improved patient satisfaction. Copyright © 2012 Elsevier Inc. All rights reserved.

  15. Olefin metathesis. 8. Active sites on Re/sub 2/O/sub 7//Al/sub 2/O/sub 3/ catalysts for the metathesis of olefins

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, R.; Ichikawa, K.; Echigoya, E.

    1978-01-01

    Disproportionation of propylene, 1-hexene, and 2-pentene was tested at 20/sup 0/-50/sup 0/C on rhenium oxide/alumina catalysts having 1:99 to 7:93 rhenium/aluminum atomic ratios. The catalysts were prepared and pretreated in various ways, including pretreatment with water. Comparisons of the activities with ESR and X-ray diffraction data showed that in catalysts containing < 1% rhenium (''K region''), the rhenium(VII) was strongly bonded in a distorted alumina lattice and inactive; that in catalysts containing 1-3% rhenium (''L region''), the rhenium formed Re-O-Al bonds in which the rhenium had some activity; and that in the very active catalysts with > 3% rhenium (''M region''), the rhenium formed Re-O-Re species which were weakly bonded and easily converted to an active species by reduction and complex formation with the olefin. The rhenium(VII) ions around the active center increased its positive charge and thus promoted the olefin adsorption. Catalysts containing 0.5% rhenium (K region) could be transformed into L or M region catalysts by addition of a metal ion of high electronegativity, such as tungsten or vanadium. Graphs, spectra, and 19 references.

  16. Insufficient joint forces of first-generation articulating instruments for laparoendoscopic single-site surgery.

    Science.gov (United States)

    Jeong, Chang Wook; Kim, Sung Hoon; Kim, Hyung Tae; Jeong, Seong Jin; Hong, Sung Kyu; Byun, Seok-Soo; Lee, Sang Eun

    2013-10-01

    The current articulating instruments used in laparoendoscopic single-site surgery do not appear to provide the joint forces required. Thus, we measured the joint forces of first-generation articulating laparoscopic instruments. To compare these forces with those necessary in the surgical context, we evaluated the forces sufficient to produce secure surgical ties in an animal model. The articulating instruments tested were Laparo-Angle (Cambridge Endoscopic Devices Inc, Framingham, MA), RealHand (Novare Surgical Systems Inc, Cupertino, CA), and Roticulator (Covidien Inc, Mansfield, MA). For each, we measured the angle between the end-effector and the shaft in proportion to the articulating force using a push-pull gauge. Two fixed-position configurations of the instruments were predetermined: the neutral and the fully articulated positions. The forces required to secure surgical ties for the ureter, renal artery, and renal vein were evaluated using kidneys harvested from a female pig. The bending forces required to bend from the neutral position to 30° were 5.6 ± 1.2 and 4.7 ± 1.0 N with the Laparo-Angle and RealHand, respectively. Furthermore, the slippage forces in the fully articulated state were 1.8 ± 0.3, 1.6 ± 0.2, and 1.5 ± 0.2 N in the above order. In contrast, the mean forces to produce surgical ties of the ureter, renal artery, and renal vein were 14.5 ± 2.3, 11.5 ± 0.8, and 10.3 ± 2.3 N, respectively. The joint forces of first-generation articulating instruments for laparoendoscopic single-site surgery are not sufficient to meet the usual operative needs. Improved articulating instruments with greater articulating forces should be developed.

  17. Self-Assembled Fe-N-Doped Carbon Nanotube Aerogels with Single-Atom Catalyst Feature as High-Efficiency Oxygen Reduction Electrocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Chengzhou [School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164 USA; Fu, Shaofang [School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164 USA; Song, Junhua [School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164 USA; Shi, Qiurong [School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164 USA; Su, Dong [Center for Functional Nanomaterials, Brookhaven National Laboratory, Upton NY 11973 USA; Engelhard, Mark H. [Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory, Richland WA 99354 USA; Li, Xiaolin [Energy and Environmental Directory, Pacific Northwest National Laboratory, Richland WA 99354 USA; Xiao, Dongdong [Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory, Richland WA 99354 USA; Li, Dongsheng [Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory, Richland WA 99354 USA; Estevez, Luis [Energy and Environmental Directory, Pacific Northwest National Laboratory, Richland WA 99354 USA; Du, Dan [School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164 USA; Lin, Yuehe [School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164 USA; Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory, Richland WA 99354 USA

    2017-02-06

    Finely controlled synthesis of high active and robust non-precious metal catalysts with excellent electrocatalytic efficiency towards oxygen reduction reaction is extremely vital for successful implementation of fuel cells and metal batteries. Unprecedented oxygen reduction reaction electrocatalytic performances and the diversified synthetic procedure in term of favorable structure/morphology characteristics make transition metals-derived M–N–C (M=Fe, Co) structures the most promising nanocatalysts. Herein, using the nitrogen-containing small molecular and inorganic salt as precursors and ultrathin tellurium nanowires as templates, we successfully synthesized a series of well-defined M-N-doped hollow carbon nanowire aerogels through one step hydrothermal route and subsequent facile annealing treatment. Taking advantage of the porous nanostructures, one-dimensional building block as well as homogeneity of active sites, the resultant Fe-N-doped carbon hollow nanowire aerogels exhibited excellent ORR electrocatalytic performance even better than commercial Pt/C in alkaline solution, holding great potential in fuel cell applications.

  18. Controllable deposition of platinum nanoparticles on single-wall carbon nanohorns as catalyst for direct methanol fuel cells.

    Science.gov (United States)

    Niu, Ben; Xu, Wei; Guo, Zhengduo; Zhou, Nengzhi; Liu, Yang; Shi, Zujin; Lian, Yongfu

    2012-09-01

    Uniform and well dispersed platinum nanoparticles were successfully deposited on single-walled carbon nanohorns with the assistance of 4,4-dipydine and ion liquids, respectively. In particular, the size of platinum nanoparticles could be controlled in a very narrow range (2.2 to 2.5 nm) when ion liquids were applied. The crystalline nature of these platinum nanoparticles was confirmed by high resolution transmission electron microscopy observation and X-ray power diffraction analysis, and two species of platinum Pt(0) and Pt(II) were detected by X-ray photoelectron spectroscopy. Electrochemical studies revealed that thus obtained nanocomposites had much better electrocatalytic activity for the methanol oxidation than those prepared with carbon nanotubes as supporter.

  19. Iron-nitrogen-activated carbon as cathode catalyst to improve the power generation of single-chamber air-cathode microbial fuel cells.

    Science.gov (United States)

    Pan, Yajun; Mo, Xiaoping; Li, Kexun; Pu, Liangtao; Liu, Di; Yang, Tingting

    2016-04-01

    In order to improve the performance of microbial fuel cell (MFC), iron-nitrogen-activated carbon (Fe-N-C) as an excellent oxygen reduction reaction (ORR) catalyst was prepared here using commercial activated carbon (AC) as matrix and employed in single chamber MFC. In MFC, the maximum power density increased to 2437±55 mW m(-2), which was 2 times of that with AC. The open circuit potential (OCP) of Fe-N-C cathode (0.47) was much higher than that of AC cathode (0.21 V). The R0 of Fe-N-C decreased by 47% from 14.36 Ω (AC) to 7.6 Ω (Fe-N-C). From X-ray photoelectron spectroscopy (XPS), pyridinic nitrogen, quaternary nitrogen and iron species were present, which played an important role in the ORR performance of Fe-N-C. These results demonstrated that the as-prepared Fe-N-C material provided a potential alternative to Pt in AC air cathode MFC for relatively desirable energy generation and wastewater treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Biorecovered precious metals from industrial wastes: single-step conversion of a mixed metal liquid waste to a bioinorganic catalyst with environmental application.

    Science.gov (United States)

    Mabbett, Amanda N; Sanyahumbi, Douglas; Yong, Ping; Macaskie, Lynne E

    2006-02-01

    The complete and continuous reduction of 1 mM Cr(VI) to Cr(III) was achieved in a flow-through reactor using a novel bioinorganic catalyst ("MM-bio-Pd(0)"), which was produced by single-step reduction of platinum group metals (PGM) from industrial waste solution onto biomass of Desulfovibrio desulfuricans ATCC 29577. Two flow-through reactor systems were compared using both "MM-bioPd(0)" and chemically reduced Pd(0). Reactors containing the latter removed Cr(VI) for 1 week only at the expense of formate as the electron donor, whereas the former gave complete Cr(VI) removal for 3 months of continuous operation. Mass balance analysis showed 100% reduction of Cr(VI) to soluble Cr(III) in the bioreactor exit solution. With the use of electron paramagnetic resonance (EPR) no intermediate Cr(V) species could be detected. Pd(0) was biodeposited similarly using Escherichia coliMC4100 and "bio-Pd(0)". The latter was used to recover Pd(II) from two acidic industrial waste leachates to generate two types of "MM-bio-Pd(0)": "SI-bio-Pd(0)" and "SII-bio-Pd(0)", respectively. The biomaterial composition was comparable in both cases, and the catalytic activity was related inversely to the amount of chloride in the waste leachate from which it was derived.

  1. Conservative site-specific and single-copy transgenesis in human LINE-1 elements.

    Science.gov (United States)

    Vijaya Chandra, Shree Harsha; Makhija, Harshyaa; Peter, Sabrina; Myint Wai, Cho Mar; Li, Jinming; Zhu, Jindong; Ren, Zhonglu; D'Alcontres, Martina Stagno; Siau, Jia Wei; Chee, Sharon; Ghadessy, Farid John; Dröge, Peter

    2016-04-07

    Genome engineering of human cells plays an important role in biotechnology and molecular medicine. In particular, insertions of functional multi-transgene cassettes into suitable endogenous sequences will lead to novel applications. Although several tools have been exploited in this context, safety issues such as cytotoxicity, insertional mutagenesis and off-target cleavage together with limitations in cargo size/expression often compromise utility. Phage λ integrase (Int) is a transgenesis tool that mediates conservative site-specific integration of 48 kb DNA into a safe harbor site of the bacterial genome. Here, we show that an Int variant precisely recombines large episomes into a sequence, term edattH4X, found in 1000 human Long INterspersed Elements-1 (LINE-1). We demonstrate single-copy transgenesis through attH4X-targeting in various cell lines including hESCs, with the flexibility of selecting clones according to transgene performance and downstream applications. This is exemplified with pluripotency reporter cassettes and constitutively expressed payloads that remain functional in LINE1-targeted hESCs and differentiated progenies. Furthermore, LINE-1 targeting does not induce DNA damage-response or chromosomal aberrations, and neither global nor localized endogenous gene expression is substantially affected. Hence, this simple transgene addition tool should become particularly useful for applications that require engineering of the human genome with multi-transgenes. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  2. Single-site Lennard-Jones models via polynomial chaos surrogates of Monte Carlo molecular simulation

    KAUST Repository

    Kadoura, Ahmad Salim

    2016-06-01

    In this work, two Polynomial Chaos (PC) surrogates were generated to reproduce Monte Carlo (MC) molecular simulation results of the canonical (single-phase) and the NVT-Gibbs (two-phase) ensembles for a system of normalized structureless Lennard-Jones (LJ) particles. The main advantage of such surrogates, once generated, is the capability of accurately computing the needed thermodynamic quantities in a few seconds, thus efficiently replacing the computationally expensive MC molecular simulations. Benefiting from the tremendous computational time reduction, the PC surrogates were used to conduct large-scale optimization in order to propose single-site LJ models for several simple molecules. Experimental data, a set of supercritical isotherms, and part of the two-phase envelope, of several pure components were used for tuning the LJ parameters (ε, σ). Based on the conducted optimization, excellent fit was obtained for different noble gases (Ar, Kr, and Xe) and other small molecules (CH4, N2, and CO). On the other hand, due to the simplicity of the LJ model used, dramatic deviations between simulation and experimental data were observed, especially in the two-phase region, for more complex molecules such as CO2 and C2 H6.

  3. Laparoendoscopic Single-Site Plus One-Port Donor Nephrectomy: Analysis of 169 Cases.

    Science.gov (United States)

    Cho, Hyuk Jin; Choi, Sae Woong; Kim, Kang Sup; Park, Yong Hyun; Bae, Woong Jin; Hong, Sung-Hoo; Lee, Ji Youl; Kim, Sae Woong; Hwang, Tae-Kon

    2015-08-01

    To present our experience with laparoendoscopic single-site plus one-port donor nephrectomy (LESSOP-DN) and compare the outcomes with laparoscopic donor nephrectomy (LDN). Prospectively collected data from 169 consecutive LESSOP-DNs and 83 LDNs performed by a single surgeon in the same time period were analyzed retrospectively. No differences in mean operative time (136 versus 130 minutes; P=.15), warm ischemia time (3.4 versus 3.5 minutes; P=.42), blood loss (50 versus 45 mL; P=.41), transfusion rates (0 versus 1 case), hospital stay (4.0 versus 3.9 days; P=.48), or overall complication rate (12.0% versus 7.7%; P=.25) were observed between the LDN and LESSOP-DN groups. The LESSOP-DN group had a shorter time to return to 100% recovery (39 versus 74 days; Pa smaller surgical incision (5.5 versus 8.2 cm; Pgroup. Renal function of the recipient based on estimated glomerular filtration rate at 1 and 3 months was similar between the groups. Health-related quality of life (QOL) was significantly higher in the LESSOP-DN group in four domains of the health survey than in the LDN group. LESSOP-DN might be associated with smaller surgical incision, improved cosmetic satisfaction, less time to recovery, less analgesic requirement, improved donor QOL, and equivalent recipient graft function.

  4. Laparoendoscopic single-site surgery in gynaecology: A new frontier in minimally invasive surgery

    Directory of Open Access Journals (Sweden)

    Fader Amanda

    2011-01-01

    Full Text Available Review Objective: To review the recent developments and published literature on laparoendoscopic single-site (LESS surgery in gynaecology. Recent Findings: Minimally invasive surgery has become a standard of care for the treatment of many benign and malignant gynaecological conditions. Recent advances in conventional laparoscopy and robotic-assisted surgery have favorably impacted the entire spectrum of gynaecological surgery. With the goal of improving morbidity and cosmesis, continued efforts towards refinement of laparoscopic techniques have lead to minimization of size and number of ports required for these procedures. LESS surgery is a recently proposed surgical term used to describe various techniques that aim at performing laparoscopic surgery through a single, small-skin incision concealed within the umbilicus. In the last 5 years, there has been a surge in the developments in surgical technology and techniques for LESS surgery, which have resulted in a significant increase in utilisation of LESS across many surgical subspecialties. Recently published outcomes data demonstrate feasibility, safety and reproducibility for LESS in gynaecology. The contemporary LESS literature, extent of gynaecological procedures utilising these techniques and limitations of current technology will be reviewed in this manuscript. Conclusions: LESS surgery represents the newest frontier in minimally invasive surgery. Comparative data and prospective trials are necessary in order to determine the clinical impact of LESS in treatment of gynaecological conditions.

  5. Single particle characterization of black carbon aerosols at a tropospheric alpine site in Switzerland

    Science.gov (United States)

    Liu, D.; Flynn, M.; Gysel, M.; Targino, A.; Crawford, I.; Bower, K.; Choularton, T.; Jurányi, Z.; Steinbacher, M.; Hüglin, C.; Curtius, J.; Kampus, M.; Petzold, A.; Weingartner, E.; Baltensperger, U.; Coe, H.

    2010-08-01

    The refractory black carbon (rBC) mass, size distribution (190-720 nm) and mixing state in sub-micron aerosols were characterized from late February to March 2007 using a single particle incandescence method at the high alpine research station Jungfraujoch (JFJ), Switzerland (46.33° N, 7.59° E, 3580 m a.s.l.). JFJ is a ground based location, which is at times exposed to continental free tropospheric air. A median mass absorption coefficient (MAC) of 10.2±3.2 m2 g-1 at λ=630 nm was derived by comparing single particle incandescence measurements of black carbon mass with continuous measurements of absorption coefficient. This value is comparable with other estimates at this location. The aerosols measured at the site were mostly well mixed and aged during transportation via the free troposphere. Pollutant sources were traced by air mass back trajectories, trace gases concentrations and the mass loading of rBC. In southeasterly wind directions, mixed or convective weather types provided the potential to vent polluted boundary layer air from the southern Alpine area and industrial northern Italy, delivering enhanced rBC mass loading and CN concentrations to the JFJ. The aerosol loadings at this site were also significantly influenced by precipitation, which led to the removal of rBC from the atmosphere. Precipitation events were shown to remove about 65% of the rBC mass from the free tropospheric background reducing the mean loading from 13±5 ng m-3 to 6±2 ng m-3(corrected to standard temperature and pressure). Overall, 40±15% of the observed rBC particles within the detectable size range were mixed with large amounts of non-refractory materials present as a thick coating. The growth of particle size into the accumulation mode was positively linked with the degree of rBC mixing, suggesting the important role of condensable materials in increasing particle size and leading to enhanced internal mixing of these materials with rBC. It is the first time that BC mass

  6. Catalysts preparing

    International Nuclear Information System (INIS)

    Normatov, I.Sh.; Mirsaidov, U.M.

    2003-01-01

    One of the base area of zeolites industry using is catalysis. The catalytic properties of zeolites use in the carbonated reactions in the petrochemistry. Last years zeolite catalysts use in oxidative-reduction processes

  7. Lunar CATALYST

    Data.gov (United States)

    National Aeronautics and Space Administration — Lunar Cargo Transportation and Landing by Soft Touchdown (Lunar CATALYST) is a NASA initiative to encourage the development of U.S. private-sector robotic lunar...

  8. Photo-oxidation catalysts

    Science.gov (United States)

    Pitts, J Roland [Lakewood, CO; Liu, Ping [Irvine, CA; Smith, R Davis [Golden, CO

    2009-07-14

    Photo-oxidation catalysts and methods for cleaning a metal-based catalyst are disclosed. An exemplary catalyst system implementing a photo-oxidation catalyst may comprise a metal-based catalyst, and a photo-oxidation catalyst for cleaning the metal-based catalyst in the presence of light. The exposure to light enables the photo-oxidation catalyst to substantially oxidize absorbed contaminants and reduce accumulation of the contaminants on the metal-based catalyst. Applications are also disclosed.

  9. Approaches to single-nanoparticle catalysis.

    Science.gov (United States)

    Sambur, Justin B; Chen, Peng

    2014-01-01

    Nanoparticles are among the most important industrial catalysts, with applications ranging from chemical manufacturing to energy conversion and storage. Heterogeneity is a general feature among these nanoparticles, with their individual differences in size, shape, and surface sites leading to variable, particle-specific catalytic activity. Assessing the activity of individual nanoparticles, preferably with subparticle resolution, is thus desired and vital to the development of efficient catalysts. It is challenging to measure the activity of single-nanoparticle catalysts, however. Several experimental approaches have been developed to monitor catalysis on single nanoparticles, including electrochemical methods, single-molecule fluorescence microscopy, surface plasmon resonance spectroscopy, X-ray microscopy, and surface-enhanced Raman spectroscopy. This review focuses on these experimental approaches, the associated methods and strategies, and selected applications in studying single-nanoparticle catalysis with chemical selectivity, sensitivity, or subparticle spatial resolution.

  10. Transition metal complexes supported on metal-organic frameworks for heterogeneous catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Farha, Omar K.; Hupp, Joseph T.; Delferro, Massimiliano; Klet, Rachel C.

    2017-02-07

    A robust mesoporous metal-organic framework comprising a hafnium-based metal-organic framework and a single-site zirconium-benzyl species is provided. The hafnium, zirconium-benzyl metal-organic framework is useful as a catalyst for the polymerization of an alkene.

  11. Laparo-endoscopic single-site (LESS) cholecystectomy with epidural vs. general anesthesia.

    Science.gov (United States)

    Ross, Sharona B; Mangar, Devanand; Karlnoski, Rachel; Camporesi, Enrico; Downes, Katheryne; Luberice, Kenneth; Haines, Krista; Rosemurgy, Alexander S

    2013-05-01

    Laparo-endoscopic single-site (LESS) surgery involves a single umbilical incision, lending itself to epidural anesthesia. This prospective, randomized study was undertaken to evaluate epidural anesthesia for patients undergoing LESS cholecystectomy, to assess the feasibility, and to analyze all intraoperative and postoperative complications. The secondary objectives were to determine differences in postoperative pain and time until PACU discharge-to-home readiness between patients. With institutional review board approval, 20 patients with chronic cholecystitis, cholelithiasis, and/or biliary dyskinesia were randomized to receive spinal epidural anesthesia (n = 10) or general anesthesia (n = 10). Postoperative pain at rest was recorded in the PACU every 10 min, and at rest and walking at discharge using the visual analog scale (VAS). Operative time and time until PACU discharge-to-home readiness were recorded. Results are expressed as mean ± SD. Patient age, American Society of Anesthesiologists class, and body mass index were similar. There were no additional ports/incisions, conversions to "open" operations, or conversions to general anesthesia. There were no differences in operative duration. Time until postanesthesia care unit discharge-to-home ready was not significantly different. The most common postoperative adverse event was urinary retention (1 epidural and 3 general anesthesia patients). Resting postoperative VAS pain score at discharge was 4.7 ± 2.5 vs. 2.2 ± 1.6 (p = 0.02, general versus epidural anesthesia respectively); the stressed VAS pain score at discharge was 6.1 ± 2.3 vs. 3.1 ± 2.8 (p = 0.02, general versus epidural anesthesia respectively). LESS cholecystectomy with epidural anesthesia was completed with no operative or anesthetic conversions, and less postoperative pain at discharge. Epidural anesthesia appears to be a preferable alternative to general anesthesia for patients undergoing LESS cholecystectomy.

  12. The Role of Non-Conventional Supports for Single-Atom Platinum-Based Catalysts in Fuel-Cell Technology: A Theoretical Surface Science Approach

    Science.gov (United States)

    2013-02-05

    could be a promising catalyst for PEM fuel cells. Introduction: Proton exchange membrane fuel cells ( PEMFCs ) have found wide potential...Unfortunately, due to their high cost and low lifespan, wide-scale commercialization of PEMFCs has been greatly impeded and much effort has been made to...lower its cost as well as to improve its durability over time. In an attempt to alleviate the high-cost associated with conventional PEMFC catalysts

  13. Electrocatalytic Activity and Stability of M-Fe Catalysts Synthesized by Polymer Complex Method for PEFC Cathode

    KAUST Repository

    Ou, Yiwei

    2011-11-01

    The polymerized complex (PC) method was used to synthesize highly dispersed iron-based catalysts for the oxygen reduction reaction (ORR). The catalysts were prepared with an addition of 1,10-phenanthroline (Phen) and transition metals (M), such as Ta, Ti, and W, in an attempt to enhance the ORR activity and durability of the catalysts. The composition and properties of the catalysts were characterized by thermogravimetric analysis, X-ray diffraction, and X-ray photoelectron spectroscopy. The catalyst components, after extensive dissolution in a strong acid solution, were characterized by inductively coupled plasma mass spectroscopy and ultraviolet-visible spectroscopy. It was found that the Ti-Fe catalyst showed improved ORR performance, and the Ta-Fe catalyst showed enhanced stability towards ORR in acidic solution. The catalytic activity and stability for ORR was observed by adding Ti or Ta into the catalyst formulation, suggesting that the interaction between added hetero-ions (Ti and Ta) and ionic Fe active sites was beneficial for the ORR. A single-cell test with the synthesized catalyst in the cathode initially generated a high power density, but the low stability remains an issue to be solved.

  14. Facile single-step ammonia heat-treatment and quenching process for the synthesis of improved Pt/N-graphene catalysts

    Science.gov (United States)

    Xiong, Bin; Zhou, Yingke; O'Hayre, Ryan; Shao, Zongping

    2013-02-01

    In this work, we present a facile route to prepare electrocatalysts for methanol oxidation. The catalyst synthesis route involves the simultaneous reduction and nitrogen doping of graphene oxide (GO) along with the reduction of H2PtCl6 to Pt by a facile ammonia gas heat-treatment and quenching process. The resulting catalysts are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy while their electrocatalytic activity toward the oxidation of methanol is evaluated by cyclic voltammetry. The obtained Pt/graphene composites consist of crystalline Pt nanoparticles in the range of 1-4 nm which are well-dispersed on the N-doped graphene sheets. The best Pt/N-graphene catalyst composite is obtained after a 5 min ammonia treatment at 800 °C followed by rapid ammonia gas quenching at room temperature. This catalyst demonstrates superior catalytic activity for methanol electro-oxidation, with a peak current density of 0.218 A mgPt-1, which is about five times higher than an undoped (hydrogen treated and quenched) Pt/graphene control catalyst. The excellent electrocatalytic performance of the ammonia quenched catalyst is attributed to the nitrogenous functional groups and dopants in the graphene sheets that are formed during the facile quenching process in ammonia.

  15. Evidence that adaptation in Drosophila is not limited by mutation at single sites.

    Directory of Open Access Journals (Sweden)

    Talia Karasov

    2010-06-01

    Full Text Available Adaptation in eukaryotes is generally assumed to be mutation-limited because of small effective population sizes. This view is difficult to reconcile, however, with the observation that adaptation to anthropogenic changes, such as the introduction of pesticides, can occur very rapidly. Here we investigate adaptation at a key insecticide resistance locus (Ace in Drosophila melanogaster and show that multiple simple and complex resistance alleles evolved quickly and repeatedly within individual populations. Our results imply that the current effective population size of modern D. melanogaster populations is likely to be substantially larger (> or = 100-fold than commonly believed. This discrepancy arises because estimates of the effective population size are generally derived from levels of standing variation and thus reveal long-term population dynamics dominated by sharp--even if infrequent--bottlenecks. The short-term effective population sizes relevant for strong adaptation, on the other hand, might be much closer to census population sizes. Adaptation in Drosophila may therefore not be limited by waiting for mutations at single sites, and complex adaptive alleles can be generated quickly without fixation of intermediate states. Adaptive events should also commonly involve the simultaneous rise in frequency of independently generated adaptive mutations. These so-called soft sweeps have very distinct effects on the linked neutral polymorphisms compared to the standard hard sweeps in mutation-limited scenarios. Methods for the mapping of adaptive mutations or association mapping of evolutionarily relevant mutations may thus need to be reconsidered.

  16. A comparative study of multiport versus laparoendoscopic single-site adrenalectomy for benign adrenal tumors.

    Science.gov (United States)

    Lin, Victor Chia-Hsiang; Tsai, Yao-Chou; Chung, Shiu-Dong; Li, Tin Chou; Ho, Chen-Hsun; Jaw, Fu-Shan; Tai, Huai-Ching; Yu, Hong-Jeng

    2012-04-01

    The safety and feasibility of laparoendoscopic single-site (LESS) adrenalectomy for benign adrenal lesions was proved in early clinical series. However, the advantages of LESS over multiport laparoscopic adrenalectomy still are under investigation. Since October 2009, the authors have prospectively performed LESS retroperitoneal adrenalectomy for 21 consecutive patients with benign adrenal tumors (LESS group). Another 28 patients with benign adrenal tumors were prospectively collected between June 2006 and October 2009 and served as a multiport laparoscopic adrenalectomy group. The patients' demographic data, operating time, estimated blood loss, peri- and postoperative complications, and short-term outcome were collected for further analysis. The demographic data were comparable between the two groups in terms of the patient age, gender, body mass index (BMI), laterality, diagnosis, and resected specimen weight. No major complication or mortality occurred in either group. Neither group had any conversions. No differences were observed between the two groups in terms of intraoperative hemodynamic status or peri- or postoperative complications. The LESS patients had quicker resumption of oral intake (0.18 vs 1 day; p benign adrenal tumors. In addition, LESS adrenalectomy provides short-term convalescence advantages over multiport laparoscopic adrenalectomy.

  17. Regulatory Closure Options for the Residue in the Hanford Site Single-Shell Tanks

    International Nuclear Information System (INIS)

    Cochran, J.R.; Shyr, L.J.

    1998-01-01

    Liquid, mixed, high-level radioactive waste (HLW) has been stored in 149 single-shell tanks (SSTS) located in tank farms on the U.S. Department of Energy's (DOE's) Hanford Site. The DOE is developing technologies to retrieve as much remaining HLW as technically possible prior to physically closing the tank farms. In support of the Hanford Tanks Initiative, Sandia National Laboratories has addressed the requirements for the regulatory closure of the radioactive component of any SST residue that may remain after physical closure. There is significant uncertainty about the end state of each of the 149 SSTS; that is, the nature and amount of wastes remaining in the SSTS after retrieval is uncertain. As a means of proceeding in the face of these uncertainties, this report links possible end-states with associated closure options. Requirements for disposal of HLW and low-level radioactive waste (LLW) are reviewed in detail. Incidental waste, which is radioactive waste produced incidental to the further processing of HLW, is then discussed. If the low activity waste (LAW) fraction from the further processing of HLW is determined to be incidental waste, then DOE can dispose of that incidental waste onsite without a license from the U.S. Nuclear Regulatory Commissions (NRC). The NRC has proposed three Incidental Waste Criteria for determining if a LAW fraction is incidental waste. One of the three Criteria is that the LAW fraction should not exceed the NRC's Class C limits

  18. Single house on-site grey water treatment using a submerged membrane bioreactor for toilet flushing.

    Science.gov (United States)

    Fountoulakis, M S; Markakis, N; Petousi, I; Manios, T

    2016-05-01

    Wastewater recycling has been and continues to be practiced all over the world for a variety of reasons including: increasing water availability, combating water shortages and drought, and supporting environmental and public health protection. Nowadays, one of the most interesting issues for wastewater recycling is the on-site treatment and reuse of grey water. During this study the efficiency of a compact Submerged Membrane Bioreactor (SMBR) system to treat real grey water in a single house in Crete, Greece, was examined. In the study, grey water was collected from a bathtub, shower and washing machine containing significant amounts of organic matter and pathogens. Chemical oxygen demand (COD) removal in the system was approximately 87%. Total suspended solids (TSS) were reduced from 95mgL(-1) in the influent to 8mgL(-1) in the effluent. The efficiency of the system to reduce anionic surfactants was about 80%. Fecal and total coliforms decreased significantly using the SMBR system due to rejection, by the membrane, used in the study. Overall, the SMBR treatment produces average effluent values that would satisfy international guidelines for indoor reuse applications such as toilet flushing. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Single-site Green function of the Dirac equation for full-potential electron scattering

    Energy Technology Data Exchange (ETDEWEB)

    Kordt, Pascal

    2012-05-30

    I present an elaborated analytical examination of the Green function of an electron scattered at a single-site potential, for both the Schroedinger and the Dirac equation, followed by an efficient numerical solution, in both cases for potentials of arbitrary shape without an atomic sphere approximation. A numerically stable way to calculate the corresponding regular and irregular wave functions and the Green function is via the angular Lippmann-Schwinger integral equations. These are solved based on an expansion in Chebyshev polynomials and their recursion relations, allowing to rewrite the Lippmann-Schwinger equations into a system of algebraic linear equations. Gonzales et al. developed this method for the Schroedinger equation, where it gives a much higher accuracy compared to previous perturbation methods, with only modest increase in computational effort. In order to apply it to the Dirac equation, I developed relativistic Lippmann-Schwinger equations, based on a decomposition of the potential matrix into spin spherical harmonics, exploiting certain properties of this matrix. The resulting method was embedded into a Korringa-Kohn-Rostoker code for density functional calculations. As an example, the method is applied by calculating phase shifts and the Mott scattering of a tungsten impurity. (orig.)

  20. Defining the learning curve of laparoendoscopic single-site Heller myotomy.

    Science.gov (United States)

    Ross, Sharona B; Luberice, Kenneth; Kurian, Tony J; Paul, Harold; Rosemurgy, Alexander S

    2013-08-01

    Initial outcomes suggest laparoendoscopic single-site (LESS) Heller myotomy with anterior fundoplication provides safe, efficacious, and cosmetically superior outcomes relative to conventional laparoscopy. This study was undertaken to define the learning curve of LESS Heller myotomy with anterior fundoplication. One hundred patients underwent LESS Heller myotomy with anterior fundoplication. Symptom frequency and severity were scored using a Likert scale (0 = never/not bothersome to 10 = always/very bothersome). Symptom resolution, additional trocars, and complications were compared among patient quartiles. Median data are presented. Preoperative frequency/severity scores were: dysphagia = 10/8 and regurgitation = 8/7. Additional trocars were placed in 12 patients (10%), of whom all were in the first two quartiles. Esophagotomy/gastrotomy occurred in three patients. Postoperative complications occurred in 9 per cent. No conversions to "open" operations occurred. Length of stay was 1 day. Postoperative frequency/severity scores were: dysphagia = 2/0 and regurgitation = 0/0; scores were less than before myotomy (P learning curve of LESS Heller myotomy with anterior fundoplication is short and safe, because proficiency is quickly attained.

  1. Regulatory Closure Options for the Residue in the Hanford Site Single-Shell Tanks

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, J.R. Shyr, L.J.

    1998-10-05

    Liquid, mixed, high-level radioactive waste (HLW) has been stored in 149 single-shell tanks (SSTS) located in tank farms on the U.S. Department of Energy's (DOE's) Hanford Site. The DOE is developing technologies to retrieve as much remaining HLW as technically possible prior to physically closing the tank farms. In support of the Hanford Tanks Initiative, Sandia National Laboratories has addressed the requirements for the regulatory closure of the radioactive component of any SST residue that may remain after physical closure. There is significant uncertainty about the end state of each of the 149 SSTS; that is, the nature and amount of wastes remaining in the SSTS after retrieval is uncertain. As a means of proceeding in the face of these uncertainties, this report links possible end-states with associated closure options. Requirements for disposal of HLW and low-level radioactive waste (LLW) are reviewed in detail. Incidental waste, which is radioactive waste produced incidental to the further processing of HLW, is then discussed. If the low activity waste (LAW) fraction from the further processing of HLW is determined to be incidental waste, then DOE can dispose of that incidental waste onsite without a license from the U.S. Nuclear Regulatory Commissions (NRC). The NRC has proposed three Incidental Waste Criteria for determining if a LAW fraction is incidental waste. One of the three Criteria is that the LAW fraction should not exceed the NRC's Class C limits.

  2. Site-selective substitutional doping with atomic precision on stepped Al (111) surface by single-atom manipulation.

    Science.gov (United States)

    Chen, Chang; Zhang, Jinhu; Dong, Guofeng; Shao, Hezhu; Ning, Bo-Yuan; Zhao, Li; Ning, Xi-Jing; Zhuang, Jun

    2014-01-01

    In fabrication of nano- and quantum devices, it is sometimes critical to position individual dopants at certain sites precisely to obtain the specific or enhanced functionalities. With first-principles simulations, we propose a method for substitutional doping of individual atom at a certain position on a stepped metal surface by single-atom manipulation. A selected atom at the step of Al (111) surface could be extracted vertically with an Al trimer-apex tip, and then the dopant atom will be positioned to this site. The details of the entire process including potential energy curves are given, which suggests the reliability of the proposed single-atom doping method.

  3. Bimetal catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ng, K. Y. Simon; Salley, Steve O.; Wang, Huali

    2017-10-03

    A catalyst comprises a carbide or nitride of a metal and a promoter element. The metal is selected from the group consisting of Mo, W, Co, Fe, Rh or Mn, and the promoter element is selected from the group consisting of Ni, Co, Al, Si, S or P, provided that the metal and the promoter element are different. The catalyst also comprises a mesoporous support having a surface area of at least about 170 m.sup.2 g.sup.-1, wherein the carbide or nitride of the metal and the promoter element is supported by the mesoporous support, and is in a non-sulfided form and in an amorphous form.

  4. Catalyst Architecture

    DEFF Research Database (Denmark)

    Kiib, Hans; Marling, Gitte; Hansen, Peter Mandal

    2014-01-01

    How can architecture promote the enriching experiences of the tolerant, the democratic, and the learning city - a city worth living in, worth supporting and worth investing in? Catalyst Architecture comprises architectural projects, which, by virtue of their location, context and their combination...... of programs, have a role in mediating positive social and/or cultural development. In this sense, we talk about architecture as a catalyst for: sustainable adaptation of the city’s infrastructure appropriate renovation of dilapidated urban districts strengthening of social cohesiveness in the city development...

  5. Spectroscopic study on the active site of a SiO2 supported niobia catalyst used for the gas-phase Beckmann rearrangement of cyclohexanone oxime to ε-caprolactam.

    Science.gov (United States)

    Maronna, M M; Kruissink, E C; Parton, R F; Soulimani, F; Weckhuysen, B M; Hoelderich, W F

    2016-08-10

    NbOx/SiO2 with a very high catalytic activity for the gas-phase Beckmann rearrangement of cyclohexanone oxime to ε-caprolactam, was investigated by different spectroscopic methods in order to obtain new insights in the formation and nature of the active sites. FT-IR spectroscopy in combination with pyridine adsorption measurements revealed that the catalyst material contains Lewis-acidic sites, most probably related to the Nb[double bond, length as m-dash]O groups of isolated tetrahedral NbO4 surface species, whereas no Brønsted-acidic sites were observed. Results from in situ Raman and complementary FT-IR measurements strongly suggest that Brønsted-acidic Nb-OH sites can be generated from Nb[double bond, length as m-dash]O groups by reaction with ethanol. This is in agreement with the observation that ethanol is essential for obtaining a very good catalyst performance. However, the Brønsted-acidic sites can be detected in significant amounts in particular in the presence of a Lewis-base, e.g. pyridine, most probably because the formation and/or the stability of these Brønsted-acidic sites are enhanced by a basic molecule. Assuming that cyclohexanone oxime, being a base, can play a similar role as pyridine, we propose on the basis of the spectroscopic findings obtained in this work and our kinetic results published recently, a reaction scheme for the formation of the active site at the Nb[double bond, length as m-dash]O group as well as for the recovery of the Nb[double bond, length as m-dash]O site during the final stage of the gas-phase Beckmann rearrangement.

  6. Effect of the HIV-1 nucleocapsid protein on reverse transcriptase pause sites revealed by single molecule microscopy

    Science.gov (United States)

    Jouonang, A.; Przybilla, F.; Godet, J.; Sharma, K. K.; Restlé, T.; de Rocquigny, H.; Darlix, J.-L.; Kenfack, C.; Didier, P.; Mély, Y.

    2013-02-01

    During reverse transcription, the HIV-1 RNA is converted by the reverse transcriptase (RT) into proviral DNA. RT is assisted by the HIV-1 nucleocapsid (NCp7) protein that notably increases the ability of RT to synthesize DNA through pause sites. Using single molecule FRET, we monitored the NCp7 effect on the binding of RT to nucleic acid sequences corresponding to two different pause sites. NCp7 was found to modify the distribution of RT orientations on the oligonucleotides and decrease the residence time of RT on one of the pause sites. These results give direct insight into the NCp7 molecular mechanism in reverse transcription.

  7. New Trends in Gold Catalysts

    Directory of Open Access Journals (Sweden)

    Leonarda F. Liotta

    2014-07-01

    Full Text Available Gold is an element that has fascinated mankind for millennia. The catalytic properties of gold have been a source of debate, due to its complete chemical inertness when in a bulk form, while it can oxidize CO at temperatures as low as ~200 K when in a nanocrystalline state, as discovered by Haruta in the late 1980s [1]. Since then, extensive activity in both applied and fundamental research on gold has been initiated. The importance of the catalysis by gold represents one of the fasted growing fields in science and is proven by the promising applications in several fields, such as green chemistry and environmental catalysis, in the synthesis of single-walled carbon nanotubes, as modifiers of Ni catalysts for methane steam and dry reforming reactions and in biological and electrochemistry applications. The range of reactions catalyzed by gold, as well as the suitability of different supports and the influence of the preparation conditions have been widely explored and optimized in applied research [2]. Gold catalysts appeared to be very different from the other noble metal-based catalysts, due to their marked dependence on the preparation method, which is crucial for the genesis of the catalytic activity. Several methods, including deposition-precipitation, chemical vapor deposition and cation adsorption, have been applied for the preparation of gold catalysts over reducible oxides, like TiO2. Among these methods, deposition-precipitation has been the most frequently employed method for Au loading, and it involves the use of tetrachloroauric (III acid as a precursor. On the other hand, the number of articles dealing with Au-loaded acidic supports is smaller than that on basic supports, possibly because the deposition of [AuCl4]− or [AuOHxCl4−x]− species on acidic supports is difficult, due to their very low point of zero charge. Despite this challenge, several groups have reported the use of acidic zeolites as supports for gold. Zeolites

  8. Contaminant Release from Residual Waste in Single Shell Tanks at the Hanford Site, Washington, USA - 9276

    International Nuclear Information System (INIS)

    Cantrell, Kirk J.; Krupka, Kenneth M.; Deutsch, William J.; Lindberg, Michael J.

    2009-01-01

    Determinations of elemental and solid-phase compositions, and contaminant release studies have been applied in an ongoing study of residual tank wastes (i.e., waste remaining after final retrieval operations) from five of 149 underground single-shell storage tanks (241-C-103, 241-C-106, 241-C-202, 241-C-203, and 241-S-112) at the U.S. Department of Energy's Hanford Site in Washington State. This work is being conducted to support performance assessments that will be required to evaluate long-term health and safety risks associated with tank site closure. The results of studies completed to date show significant variability in the compositions, solid phase properties, and contaminant release characteristics from these residual tank wastes. This variability is the result of differences in waste chemistry/composition of wastes produced from several different spent fuel reprocessing schemes, subsequent waste reprocessing to remove certain target constituents, tank farm operations that concentrated wastes and mixed wastes between tanks, and differences in retrieval processes used to remove the wastes from the tanks. Release models were developed based upon results of chemical characterization of the bulk residual waste, solid-phase characterization (see companion paper 9277 by Krupka et al.), leaching and extraction experiments, and geochemical modeling. In most cases empirical release models were required to describe contaminant release from these wastes. Release of contaminants from residual waste was frequently found to be controlled by the solubility of phases that could not be identified and/or for which thermodynamic data and/or dissolution rates have not been measured. For example, significant fractions of Tc-99, I-129, and Cr appear to be coprecipitated at trace concentrations in metal oxide phases that could not be identified unambiguously. In the case of U release from tank 241-C-103 residual waste, geochemical calculations indicated that leachate

  9. Organization of DNA partners and strand exchange mechanisms during Flp site-specific recombination analyzed by difference topology, single molecule FRET and single molecule TPM.

    Science.gov (United States)

    Ma, Chien-Hui; Liu, Yen-Ting; Savva, Christos G; Rowley, Paul A; Cannon, Brian; Fan, Hsiu-Fang; Russell, Rick; Holzenburg, Andreas; Jayaram, Makkuni

    2014-02-20

    Flp site-specific recombination between two target sites (FRTs) harboring non-homology within the strand exchange region does not yield stable recombinant products. In negatively supercoiled plasmids containing head-to-tail sites, the reaction produces a series of knots with odd-numbered crossings. When the sites are in head-to-head orientation, the knot products contain even-numbered crossings. Both types of knots retain parental DNA configuration. By carrying out Flp recombination after first assembling the topologically well defined Tn3 resolvase synapse, it is possible to determine whether these knots arise by a processive or a dissociative mechanism. The nearly exclusive products from head-to-head and head-to-tail oriented "non-homologous" FRT partners are a 4-noded knot and a 5-noded knot, respectively. The corresponding products from a pair of native (homologous) FRT sites are a 3-noded knot and a 4-noded catenane, respectively. These results are consistent with non-homology-induced two rounds of dissociative recombination by Flp, the first to generate reciprocal recombinants containing non-complementary base pairs and the second to produce parental molecules with restored base pairing. Single molecule fluorescence resonance energy transfer (smFRET) analysis of geometrically restricted FRTs, together with single molecule tethered particle motion (smTPM) assays of unconstrained FRTs, suggests that the sites are preferentially synapsed in an anti-parallel fashion. This selectivity in synapse geometry occurs prior to the chemical steps of recombination, signifying early commitment to a productive reaction path. The cumulative topological, smFRET and smTPM results have implications for the relative orientation of DNA partners and the directionality of strand exchange during recombination mediated by tyrosine site-specific recombinases. Copyright © 2013. Published by Elsevier Ltd.

  10. Functionalization of zeolitic cavities: grafting NH2 groups in framework T sites of B-SSZ-13--a way to obtain basic solids catalysts?

    Science.gov (United States)

    Regli, Laura; Bordiga, Silvia; Busco, Claudia; Prestipino, Carmelo; Ugliengo, Piero; Zecchina, Adriano; Lamberti, Carlo

    2007-10-10

    Insertion of B atoms into an Al-free zeolitic framework with CHA topology results in the formation of B-SSZ-13 zeotype with Si/B = 11. B K-edge NEXAFS testifies that B forms [B(OSi)4] units in a Td-like geometry (sp3-hybridized B atoms). According to B K-edge NEXAFS and IR, template burning results in the formation of [B(OSi)3] units in a D3h-like geometry (sp2-hybridized B atoms) with a break of a B-O-Si bond and the formation of a Si-OH group. The activated material contains B(III) Lewis acid centers able to specifically coordinate bases like NH3. Such [B(OSi)3] units are reactive toward ammonia, resulting in the formation of B-NH2 surface functionality inside the pores of B-SSZ-13 already under mild conditions, i.e., 35 mbar of NH3 at 373 K for 30 min and without crystallinity degradation. A minor fraction of Si-NH2 cannot be excluded owing to the presence of two IR doublets at 3500 and 3430 cm-1 and at 1600 and 1550 cm-1. Ab initio B3LYP/6-31+G(d,p) calculations on a cluster model, supported by a single-point MP2 on B3LYP/6-31+G(D,P) optimized structures, found the break by NH3 of a B-O-Si bond of the [B(OSi)3] unit with formation of [SiOH] and [H2N-B(OSi)2] species to be energetically favored. Comparison between experimental and computed frequency shifts shows them to be in semiquantitative agreement. The high stability of the B-NH2 surface functionality is probed by N K-edge NEXAFS spectra collected under UHV conditions. These findings can open a new route in the preparation of shape selective solid basic catalysts.

  11. Single-site robotic cholecystectomy and robotics training: should we start in the junior years?

    Science.gov (United States)

    Ayabe, Reed I; Parrish, Aaron B; Dauphine, Christine E; Hari, Danielle M; Ozao-Choy, Junko J

    2018-04-01

    It has become increasingly important to expose surgical residents to robotic surgery as its applications continue to expand. Single-site robotic cholecystectomy (SSRC) is an excellent introductory case to robotics. Resident involvement in SSRC is known to be feasible. Here, we sought to determine whether it is safe to introduce SSRC to junior residents. A total of 98 SSRC cases were performed by general surgery residents between August 2015 and August 2016. Cases were divided into groups based on resident level: second- and third-years (juniors) versus fourth- and fifth-years (seniors). Patient age, gender, race, body mass index, and comorbidities were recorded. The number of prior laparoscopic cholecystectomies completed by participating residents was noted. Outcomes including operative time, console time, rate of conversion to open cholecystectomy, and complication rate were compared between groups. Juniors performed 54 SSRC cases, whereas seniors performed 44. There were no significant differences in patient age, gender, race, body mass index, or comorbidities between the two groups. Juniors had less experience with laparoscopic cholecystectomy. There was no significant difference in mean operative time (92.7 min versus 98.0 min, P = 0.254), console time (48.7 min versus 50.8 min, P = 0.639), or complication rate (3.7% versus 2.3%, P = 0.68) between juniors and seniors. SSRC is an excellent way to introduce general surgery residents to robotics. This study shows that with attending supervision, SSRC is feasible and safe for both junior and senior residents with very low complication rates and no adverse effect on operative time. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Use of single-well tracer dilution tests to evaluate LNAPL flux at seven field sites.

    Science.gov (United States)

    Mahler, Nicholas; Sale, Tom; Smith, Tim; Lyverse, Mark

    2012-01-01

    Petroleum liquids, referred to as light non-aqueous phase liquids (LNAPLs), are commonly found beneath petroleum facilities. Concerns with LNAPLs include migration into clean soils, migration beyond property boundaries, and discharges to surface water. Single-well tracer dilution techniques were used to measure LNAPL fluxes through 50 wells at 7 field sites. A hydrophobic tracer was mixed into LNAPL in a well. Intensities of fluorescence associated with the tracer were measured over time using a spectrometer and a fiber optic cable. LNAPL fluxes were estimated using observed changes in the tracer concentrations over time. Measured LNAPL fluxes range from 0.006 to 2.6 m/year with a mean and median of 0.15 and 0.064 m/year, respectively. Measured LNAPL fluxes are two to four orders of magnitude smaller than a common groundwater flux of 30 m/year. Relationships between LNAPL fluxes and possible governing parameters were evaluated. Observed LNAPL fluxes are largely independent of LNAPL thickness in wells. Natural losses of LNAPL through dissolution, evaporation, and subsequent biodegradation, were estimated using a simple mass balance, measured LNAPL fluxes in wells, and an assumed stable LNAPL extent. The mean and median of the calculated loss rates were found to be 24.0 and 5.0 m3/ha/year, respectively. Mean and median losses are similar to values reported by others. Coupling observed LNAPL fluxes to observed rates of natural LNAPL depletion suggests that natural losses of LNAPL may be an important parameter controlling the overall extent of LNAPL bodies.

  13. Comparative study of hybrid laparoendoscopic single-site (LESS) partial nephrectomy and conventional multiport laparoscopy.

    Science.gov (United States)

    Redondo, C; Esquinas, C; Meilán, E; García-Tello, A; Arance, I; Angulo, J C

    2017-05-01

    To investigate the surgical and oncological outcomes of hybrid laparoendoscopic single-site (LESS) in partial nephrectomy with reusable components compared with multiport laparoscopy. Hybrid LESS technique with auxiliary 3.5mm trocar (n=20) was compared with conventional multiport laparoscopy (n=26) by a prospective, paired, nonrandomized, and comparative study in partially nephrectomized patients. Follow-up average was 31±18.6 months. In one case, LESS was converted to laparoscopy. No differences were found regarding age, sex, body mass index, laterality, localization, tumor size or use of double J stent. Dominance of Loop-I (P=0.09) and benign histology (P=0.05) were observed in the LESS group. Neither there were differences regarding operating time, ischemia time, use of hemostatic materials, estimated blood loss, postoperative hemoglobin levels, transfusion or other complications. In any case, to extend the skin incision for specimen extraction was not necessary. Drainage time (P=0.006) and hospital stay (P=0.003) were better in LESS patients. Concerning complications, no significant differences were observed according Clavien-Dindo scale. In laparoscopic group one patient died of pulmonary embolism after hospital discharge. No positive margins were observed in any case. During follow-up neither tumor recurrence nor disease progression were observed. Regarding surgical outcomes, partial nephrectomy by LESS technique does not imply improvements, excepting shorter hospital stay, probably due to accurate surgical hemostasis and/or selection of cases. No surgical and oncological risks are involved, as well as no improvement in ischemia time, blood loss or transfusion rate. We find no significant difference in cosmetic outcomes. Copyright © 2016 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  14. Quantifying the cognitive cost of laparo-endoscopic single-site surgeries: Gaze-based indices.

    Science.gov (United States)

    Di Stasi, Leandro L; Díaz-Piedra, Carolina; Ruiz-Rabelo, Juan Francisco; Rieiro, Héctor; Sanchez Carrion, Jose M; Catena, Andrés

    2017-11-01

    Despite the growing interest concerning the laparo-endoscopic single-site surgery (LESS) procedure, LESS presents multiple difficulties and challenges that are likely to increase the surgeon's cognitive cost, in terms of both cognitive load and performance. Nevertheless, there is currently no objective index capable of assessing the surgeon cognitive cost while performing LESS. We assessed if gaze-based indices might offer unique and unbiased measures to quantify LESS complexity and its cognitive cost. We expect that the assessment of surgeon's cognitive cost to improve patient safety by measuring fitness-for-duty and reducing surgeons overload. Using a wearable eye tracker device, we measured gaze entropy and velocity of surgical trainees and attending surgeons during two surgical procedures (LESS vs. multiport laparoscopy surgery [MPS]). None of the participants had previous experience with LESS. They performed two exercises with different complexity levels (Low: Pattern Cut vs. High: Peg Transfer). We also collected performance and subjective data. LESS caused higher cognitive demand than MPS, as indicated by increased gaze entropy in both surgical trainees and attending surgeons (exploration pattern became more random). Furthermore, gaze velocity was higher (exploration pattern became more rapid) for the LESS procedure independently of the surgeon's expertise. Perceived task complexity and laparoscopic accuracy confirmed gaze-based results. Gaze-based indices have great potential as objective and non-intrusive measures to assess surgeons' cognitive cost and fitness-for-duty. Furthermore, gaze-based indices might play a relevant role in defining future guidelines on surgeons' examinations to mark their achievements during the entire training (e.g. analyzing surgical learning curves). Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Site-specific conjugation of single domain antibodies to liposomes enhances photosensitizer uptake and photodynamic therapy efficacy

    NARCIS (Netherlands)

    Broekgaarden, M.; van Vught, R.; Oliveira, S.; Roovers, R. C.; van Bergen En Henegouwen, P. M. P.; Pieters, R. J.; van Gulik, T. M.; Breukink, E.; Heger, M.

    2016-01-01

    Photodynamic therapy for therapy-resistant cancers will greatly benefit from targeted delivery of tumor photosensitizing agents. In this study, a strategy for the site-specific conjugation of single domain antibodies onto liposomes containing the photosensitizer zinc phthalocyanine was developed and

  16. Site-specific conjugation of single domain antibodies to liposomes enhances photosensitizer uptake and photodynamic therapy efficacy.

    Science.gov (United States)

    Broekgaarden, M; van Vught, R; Oliveira, S; Roovers, R C; van Bergen en Henegouwen, P M P; Pieters, R J; Van Gulik, T M; Breukink, E; Heger, M

    2016-03-28

    Photodynamic therapy for therapy-resistant cancers will greatly benefit from targeted delivery of tumor photosensitizing agents. In this study, a strategy for the site-specific conjugation of single domain antibodies onto liposomes containing the photosensitizer zinc phthalocyanine was developed and tested.

  17. Immediate Loading of Anterior Single Tooth Implants Placed in Healed Sites : Five-Year Results of a Randomized Clinical Trial

    NARCIS (Netherlands)

    den Hartog, Laurens; Raghoebar, Gerry M.; Stellingsma, Kees; Vissink, Arjan; Meijer, Henny J. A.

    2016-01-01

    Purpose: The aim of this study was to compare the 5-year outcome of immediate loading with that of conventional loading for anterior single-tooth implants placed in healed sites. It was hypothesized that immediate loading is not inferior to conventional loading. Materials and Methods: A total of 62

  18. Autothermal reforming catalyst having perovskite structure

    Science.gov (United States)

    Krumpel, Michael [Naperville, IL; Liu, Di-Jia [Naperville, IL

    2009-03-24

    The invention addressed two critical issues in fuel processing for fuel cell application, i.e. catalyst cost and operating stability. The existing state-of-the-art fuel reforming catalyst uses Rh and platinum supported over refractory oxide which add significant cost to the fuel cell system. Supported metals agglomerate under elevated temperature during reforming and decrease the catalyst activity. The catalyst is a perovskite oxide or a Ruddlesden-Popper type oxide containing rare-earth elements, catalytically active firs row transition metal elements, and stabilizing elements, such that the catalyst is a single phase in high temperature oxidizing conditions and maintains a primarily perovskite or Ruddlesden-Popper structure under high temperature reducing conditions. The catalyst can also contain alkaline earth dopants, which enhance the catalytic activity of the catalyst, but do not compromise the stability of the perovskite structure.

  19. Mesoporous Silica with Site-Isolated Amine and Phosphotungstic Acid Groups: A Solid Catalyst with Tunable Antagonistic Functions for One-Pot Tandem Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Shiju N. R.; Syed K.; Alberts A.; Brown D. and Rothenberg G.

    2011-09-15

    A bifunctional solid catalyst is prepared by combining acid and base functions on mesoporous silica supports. The co-existence of these functions is shown by a two-step reaction sequence in one pot. Excellent product yields, which cannot be obtained by separated acid and base functions in one pot, show the validity of our concept.

  20. Coal catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kroenig, W.

    1944-02-11

    Some considerations in the selection of a catalyst for the liquid phase of coal hydrogenation are discussed. Some of the previous history of such selections is mentioned. At one stage of the development, the principal catalyst had been iron sulfate (FeSO/sub 4/.7H/sub 2/O). Later, for reasons of cost and availability of large supplies, selections had turned to mixtures of iron sulfate and one or another of some iron oxide- and aluminum oxide-containing byproducts of aluminum manufacture, namely Bayermasse, Luxamsse, or Lautamasse. Much of the discussion centered on optimal proportions for such mixtures, particularly as related to pH values of resulting coal pastes. Upper Silesian coal was more alkaline than Ruhr coal, and Bayermasse, etc., were quite alkaline. Thus, since the iron sulfate served as a partial neutralizer for the coal as well as a catalyst, it seemed necessary to increase the proportions of iron sulfate in the catalyst mixture when processing coal of greater alkalinity. A further reason for a greater proportion of iron sulfate seemed to be that most of the catalytic activity of the iron came from the ferrous iron of iron sulfate rather than from the ferric iron of the other materials. Ferrous-ferric ratios also seemed to indicate that Luxmasse or Lautamasse might be better catalyst components than Bayermasse but their water content sometimes caused handling problems, so Bayermasse had been more widely used. Formation of deposits in the preheater was more likely due to the Bayermasse than to the iron sulfate; sodium sulfide could help to prevent them.

  1. Quantitative 3D Fluorescence Imaging of Single Catalytic Turnovers Reveals Spatiotemporal Gradients in Reactivity of Zeolite H-ZSM-5 Crystals upon Steaming

    NARCIS (Netherlands)

    Ristanovic, Zoran|info:eu-repo/dai/nl/328233005; Hofmann, Jan P.|info:eu-repo/dai/nl/355351110; De Cremer, Gert; Kubarev, Alexey V.; Rohnke, Marcus; Meirer, Florian; Hofkens, Johan; Roeffaers, Maarten B. J.; Weckhuysen, Bert M.|info:eu-repo/dai/nl/285484397

    2015-01-01

    Optimizing the number, distribution, and accessibility of Bronsted acid sites in zeolite-based catalysts is of a paramount importance to further improve their catalytic performance. However, it remains challenging to measure real-time changes in reactivity of single zeolite catalyst particles by

  2. Stable iridium dinuclear heterogeneous catalysts supported on metal-oxide substrate for solar water oxidation.

    Science.gov (United States)

    Zhao, Yanyan; Yang, Ke R; Wang, Zechao; Yan, Xingxu; Cao, Sufeng; Ye, Yifan; Dong, Qi; Zhang, Xizi; Thorne, James E; Jin, Lei; Materna, Kelly L; Trimpalis, Antonios; Bai, Hongye; Fakra, Sirine C; Zhong, Xiaoyan; Wang, Peng; Pan, Xiaoqing; Guo, Jinghua; Flytzani-Stephanopoulos, Maria; Brudvig, Gary W; Batista, Victor S; Wang, Dunwei

    2018-03-05

    Atomically dispersed catalysts refer to substrate-supported heterogeneous catalysts featuring one or a few active metal atoms that are separated from one another. They represent an important class of materials ranging from single-atom catalysts (SACs) and nanoparticles (NPs). While SACs and NPs have been extensively reported, catalysts featuring a few atoms with well-defined structures are poorly studied. The difficulty in synthesizing such structures has been a critical challenge. Here we report a facile photochemical method that produces catalytic centers consisting of two Ir metal cations, bridged by O and stably bound to a support. Direct evidence unambiguously supporting the dinuclear nature of the catalysts anchored on α-Fe 2 O 3 is obtained by aberration-corrected scanning transmission electron microscopy (AC-STEM). Experimental and computational results further reveal that the threefold hollow binding sites on the OH-terminated surface of α-Fe 2 O 3 anchor the catalysts to provide outstanding stability against detachment or aggregation. The resulting catalysts exhibit high activities toward H 2 O photooxidation.

  3. Ex-vivo training model for laparoendoscopic single-site surgery

    Directory of Open Access Journals (Sweden)

    Kommu Sashi

    2011-01-01

    Full Text Available Background: Laparoendoscopic single-site surgery (LESS has recently been applied successfully in the performance of a host of surgical procedures. Preliminary consensus from the experts is that this mode of surgery is technically challenging and requires expertise. The transition from trainee to practicing surgeon, especially in complex procedures with challenging learning curves, takes time and mentor-guided nurturing. However, the trainee needs to use platforms of training to gain the skills that are deemed necessary for undertaking the live human case. Objective: This article aims to demonstrate a step-by-step means of how to acquire the necessary instrumentation and build a training model for practicing steeplechase exercises in LESS for urological surgeons and trainees. The tool built as a result of this could set the platform for performance of basic and advanced skills uptake using conventional, bent and articulated instruments. A preliminary construct validity of the platform was conducted. Materials and Methods: A box model was fitted with an R-Port™ and camera. Articulated and conventional instruments were used to demonstrate basic exercises (e.g. glove pattern cutting, loop stacking and suturing and advanced exercises (e.g. pyeloplasty. The validation included medical students (M, final year laparoscopic fellows (F and experienced consultant laparoscopic surgeons (C with at least 50 LESS cases experience in total, were tested on eight basic skill tasks (S including manipulation of the flexible cystoscope (S1, hand eye coordination (S2, cutting with flexible scissors (S3, grasping with flexible needle holders (S4, two-handed maneuvers (S5, object translocation (S6, cross hand suturing with flexible instruments (S7 and conduction of an ex-vivo pyeloplasty. Results: The successful application of the box model was demonstrated by trainee based exercises. The cost of the kit with circulated materials was less than £150 (Pounds Sterling

  4. Clinical evaluation of implant survival based on size and site of placement: A retrospective study of immediate implants at single rooted teeth sites.

    Science.gov (United States)

    Ramalingam, Sundar; Al-Hindi, Maryam; Al-Eid, Raniah Abdullah; Nooh, Nasser

    2015-04-01

    This retrospective clinical study sought to evaluate the survival of immediate implants placed at maxillary and mandibular single-rooted tooth extraction sites and to determine the relationship among implant size, placement site, and implant survival. Between January 2010 and June 2011, 85 patients (33 males, 52 females; mean age: 45 years) underwent immediate implant placement after extraction of single-rooted teeth. All implants were restored between 12 and 14 weeks after implant placement. The implant survival and its relationship with implant size and implantation site were evaluated by odds ratios (ORs). Implants were placed at the following sites: upper central incisor (UCI, n = 35), upper lateral incisor (ULI, n = 27), upper second premolar (U2ndP, n = 36), lower incisor (LI, n = 53), and lower premolar (LP, n = 22). Implants of the following sizes were used: 5 × 10 mm (n = 24), 5 × 8 mm (n = 21), 4.3 × 10 mm (n = 77), 4.3 × 8 mm (n = 36), 3.5 × 10 mm (n = 12), and 3.5 × 8 mm (n = 3). After a mean follow-up time of 47 months, the overall implant survival rate was 96%. Survival rate was highest at the LI site (98.1%) and lowest at the ULI site (92.6%). All of the 5-mm implants survived (100%), as did most of the 4.3 × 10 mm implants (96.1%). Implants of 4.3 × 8 mm and 3.5 × 10 mm were the least successful (91.7%). Mandibular implants had a better survival rate (97.3%) than maxillary implants (94.9%). There was no significant OR of increased survival for any particular implant size or site. Immediate implant placement in fresh extraction sockets can give predictable clinical outcomes, regardless of the implant size and site of placement.

  5. DNA deformability changes of single base pair mutants within CDE binding sites in S. Cerevisiae centromere DNA correlate with measured chromosomal loss rates and CDE binding site symmetries

    Directory of Open Access Journals (Sweden)

    Marx Kenneth A

    2006-03-01

    Full Text Available Abstract Background The centromeres in yeast (S. cerevisiae are organized by short DNA sequences (125 bp on each chromosome consisting of 2 conserved elements: CDEI and CDEIII spaced by a CDEII region. CDEI and CDEIII are critical sequence specific protein binding sites necessary for correct centromere formation and following assembly with proteins, are positioned near each other on a specialized nucleosome. Hegemann et al. BioEssays 1993, 15: 451–460 reported single base DNA mutants within the critical CDEI and CDEIII binding sites on the centromere of chromosome 6 and quantitated centromere loss of function, which they measured as loss rates for the different chromosome 6 mutants during cell division. Olson et al. Proc Natl Acad Sci USA 1998, 95: 11163–11168 reported the use of protein-DNA crystallography data to produce a DNA dinucleotide protein deformability energetic scale (PD-scale that describes local DNA deformability by sequence specific binding proteins. We have used the PD-scale to investigate the DNA sequence dependence of the yeast chromosome 6 mutants' loss rate data. Each single base mutant changes 2 PD-scale values at that changed base position relative to the wild type. In this study, we have utilized these mutants to demonstrate a correlation between the change in DNA deformability of the CDEI and CDEIII core sites and the overall experimentally measured chromosome loss rates of the chromosome 6 mutants. Results In the CDE I and CDEIII core binding regions an increase in the magnitude of change in deformability of chromosome 6 single base mutants with respect to the wild type correlates to an increase in the measured chromosome loss rate. These correlations were found to be significant relative to 105 Monte Carlo randomizations of the dinucleotide PD-scale applied to the same calculation. A net loss of deformability also tends to increase the loss rate. Binding site position specific, 4 data-point correlations were also

  6. A further step toward H2 in automobile : development of an efficient bi-functional catalyst for single stage water gas shift

    NARCIS (Netherlands)

    Azzam, K.G.H.

    2008-01-01

    The suitability of polymer electrolyte fuel (PEM) cells for stationary and vehicular applications initiated research in all areas of fuel processor (i.e. reformer, water-gas-shift, preferential oxidation of CO (PROX)) catalysts for hydrogen generation. Water gas shift (WGS) reaction is an essential

  7. Single-Site Active Cobalt-Based Photocatalyst with a Long Carrier Lifetime for Spontaneous Overall Water Splitting.

    Science.gov (United States)

    Liu, Wei; Cao, Linlin; Cheng, Weiren; Cao, Yuanjie; Liu, Xiaokang; Zhang, Wei; Mou, Xiaoli; Jin, Lili; Zheng, Xusheng; Che, Wei; Liu, Qinghua; Yao, Tao; Wei, Shiqiang

    2017-08-01

    An active and stable photocatalyst to directly split water is desirable for solar-energy conversion. However, it is difficult to accomplish overall water splitting without sacrificial electron donors. Herein, we demonstrate a strategy via constructing a single site to simultaneously promote charge separation and catalytic activity for robust overall water splitting. A single Co 1 -P 4 site confined on g-C 3 N 4 nanosheets was prepared by a facile phosphidation method, and identified by electron microscopy and X-ray absorption spectroscopy. This coordinatively unsaturated Co site can effectively suppress charge recombination and prolong carrier lifetime by about 20 times relative to pristine g-C 3 N 4 , and boost water molecular adsorption and activation for oxygen evolution. This single-site photocatalyst exhibits steady and high water splitting activity with H 2 evolution rate up to 410.3 μmol h -1  g -1 , and quantum efficiency as high as 2.2 % at 500 nm. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Interfaces in Heterogeneous Catalysts: Advancing Mechanistic Understanding through Atomic-Scale Measurements.

    Science.gov (United States)

    Gao, Wenpei; Hood, Zachary D; Chi, Miaofang

    2017-04-18

    Developing novel catalysts with high efficiency and selectivity is critical for enabling future clean energy conversion technologies. Interfaces in catalyst systems have long been considered the most critical factor in controlling catalytic reaction mechanisms. Interfaces include not only the catalyst surface but also interfaces within catalyst particles and those formed by constructing heterogeneous catalysts. The atomic and electronic structures of catalytic surfaces govern the kinetics of binding and release of reactant molecules from surface atoms. Interfaces within catalysts are introduced to enhance the intrinsic activity and stability of the catalyst by tuning the surface atomic and chemical structures. Examples include interfaces between the core and shell, twin or domain boundaries, or phase boundaries within single catalyst particles. In supported catalyst nanoparticles (NPs), the interface between the metallic NP and support serves as a critical tuning factor for enhancing catalytic activity. Surface electronic structure can be indirectly tuned and catalytically active sites can be increased through the use of supporting oxides. Tuning interfaces in catalyst systems has been identified as an important strategy in the design of novel catalysts. However, the governing principle of how interfaces contribute to catalyst behavior, especially in terms of interactions with intermediates and their stability during electrochemical operation, are largely unknown. This is mainly due to the evolving nature of such interfaces. Small changes in the structural and chemical configuration of these interfaces may result in altering the catalytic performance. These interfacial arrangements evolve continuously during synthesis, processing, use, and even static operation. A technique that can probe the local atomic and electronic interfacial structures with high precision while monitoring the dynamic interfacial behavior in situ is essential for elucidating the role of

  9. Catalyst Architecture

    DEFF Research Database (Denmark)

    Catalyst Architecture’ takes its point of departure in a broadened understanding of the role of architecture in relation to developmental problems in large cities. Architectural projects frame particular functions and via their form language, they can provide the user with an aesthetic experience....... The broadened understanding of architecture consists in that an architectural project, by virtue of its placement in the context and of its composition of programs, can have a mediating role in a positive or cultural development of the district in question. In this sense, we talk about architecture as catalyst...... cities on the planet have growing pains and social cohesiveness is under pressure from an increased difference between rich and poor, social segregation, ghettoes, immigration of guest workers and refugees, commercial mass tourism etc. In this context, it is important to ask which role architecture...

  10. Novel synthesis of highly durable and active Pt catalyst encapsulated in nitrogen containing carbon for polymer electrolyte membrane fuel cell

    Science.gov (United States)

    Lee, Hyunjoon; Sung, Yung-Eun; Choi, Insoo; Lim, Taeho; Kwon, Oh Joong

    2017-09-01

    Novel synthesis of a Pt catalyst encapsulated in a N-containing carbon layer for use in a polymer electrolyte membrane fuel cell is described in this study. A Pt-aniline complex, formed by mixing Pt precursor and aniline monomer, was used as the source of Pt, C, and N. Heat treatment of the Pt-aniline complex with carbon black yielded 5 nm Pt nanoparticles encapsulated by a N-containing carbon layer originating from aniline carbonization. The synthesized Pt catalyst exhibited higher mass specific activity to oxygen reduction reaction than that shown by conventional Pt/C catalyst because pyridinic N with graphitic carbon in the carbon layer provided active sites for oxygen reduction reaction in addition to those provided by Pt. In single cell testing, initial performance of the synthesized catalyst was limited because the thick catalyst layer increased resistance related to mass transfer. However, it was observed that the carbon layer successfully prevented Pt nanoparticles from growing via agglomeration and Ostwald ripening under fuel cell operation, thereby improving durability. Furthermore, a mass specific performance of the synthesized catalyst higher than that of a conventional Pt/C catalyst was achieved by modifying the synthesized catalyst's layer thickness.

  11. Patterns and plasticity in RNA-protein interactions enable recruitment of multiple proteins through a single site

    Science.gov (United States)

    Valley, Cary T.; Porter, Douglas F.; Qiu, Chen; Campbell, Zachary T.; Hall, Traci M. Tanaka; Wickens, Marvin

    2012-01-01

    mRNA control hinges on the specificity and affinity of proteins for their RNA binding sites. Regulatory proteins must bind their own sites and reject even closely related noncognate sites. In the PUF [Pumilio and fem-3 binding factor (FBF)] family of RNA binding proteins, individual proteins discriminate differences in the length and sequence of binding sites, allowing each PUF to bind a distinct battery of mRNAs. Here, we show that despite these differences, the pattern of RNA interactions is conserved among PUF proteins: the two ends of the PUF protein make critical contacts with the two ends of the RNA sites. Despite this conserved “two-handed” pattern of recognition, the RNA sequence is flexible. Among the binding sites of yeast Puf4p, RNA sequence dictates the pattern in which RNA bases are flipped away from the binding surface of the protein. Small differences in RNA sequence allow new modes of control, recruiting Puf5p in addition to Puf4p to a single site. This embedded information adds a new layer of biological meaning to the connections between RNA targets and PUF proteins. PMID:22467831

  12. Dynamics of Catalyst Nanoparticles

    DEFF Research Database (Denmark)

    Hansen, Thomas Willum; Cavalca, Filippo; Wagner, Jakob Birkedal

    Transmission electron microscopy (TEM) is extensively used in catalysis research. Recent developments in aberration correction allows imaging surface structures with unprecedented resolution. Using these correctors in conjunction with environmental TEM (ETEM), where imaging of materials can be done...... under gas exposure, dynamic phenomena such as sintering and growth can be observed with sub-Ångstrøm resolution. Metal nanoparticles contain the active sites in heterogeneous catalysts, which are important for many industrial applications including the production of clean fuels, chemicals...... and pharmaceuticals, and the cleanup of exhaust from automobiles and stationary power plants. Sintering, or thermal deactivation, is an important mechanism for the loss of catalyst activity. In order to initiate a systematic study of the dynamics and sintering of nanoparticles, various catalytic systems have been...

  13. The Influence of Ziegler-Natta and Metallocene Catalysts on Polyolefin Structure, Properties, and Processing Ability

    Directory of Open Access Journals (Sweden)

    Ahmad Shamiri

    2014-07-01

    Full Text Available 50 years ago, Karl Ziegler and Giulio Natta were awarded the Nobel Prize for their discovery of the catalytic polymerization of ethylene and propylene using titanium compounds and aluminum-alkyls as co-catalysts. Polyolefins have grown to become one of the biggest of all produced polymers. New metallocene/methylaluminoxane (MAO catalysts open the possibility to synthesize polymers with highly defined microstructure, tacticity, and steroregularity, as well as long-chain branched, or blocky copolymers with excellent properties. This improvement in polymerization is possible due to the single active sites available on the metallocene catalysts in contrast to their traditional counterparts. Moreover, these catalysts, half titanocenes/MAO, zirconocenes, and other single site catalysts can control various important parameters, such as co-monomer distribution, molecular weight, molecular weight distribution, molecular architecture, stereo-specificity, degree of linearity, and branching of the polymer. However, in most cases research in this area has reduced academia as olefin polymerization has seen significant advancements in the industries. Therefore, this paper aims to further motivate interest in polyolefin research in academia by highlighting promising and open areas for the future.

  14. The Influence of Ziegler-Natta and Metallocene Catalysts on Polyolefin Structure, Properties, and Processing Ability

    Science.gov (United States)

    Shamiri, Ahmad; Chakrabarti, Mohammed H.; Jahan, Shah; Hussain, Mohd Azlan; Kaminsky, Walter; Aravind, Purushothaman V.; Yehye, Wageeh A.

    2014-01-01

    50 years ago, Karl Ziegler and Giulio Natta were awarded the Nobel Prize for their discovery of the catalytic polymerization of ethylene and propylene using titanium compounds and aluminum-alkyls as co-catalysts. Polyolefins have grown to become one of the biggest of all produced polymers. New metallocene/methylaluminoxane (MAO) catalysts open the possibility to synthesize polymers with highly defined microstructure, tacticity, and steroregularity, as well as long-chain branched, or blocky copolymers with excellent properties. This improvement in polymerization is possible due to the single active sites available on the metallocene catalysts in contrast to their traditional counterparts. Moreover, these catalysts, half titanocenes/MAO, zirconocenes, and other single site catalysts can control various important parameters, such as co-monomer distribution, molecular weight, molecular weight distribution, molecular architecture, stereo-specificity, degree of linearity, and branching of the polymer. However, in most cases research in this area has reduced academia as olefin polymerization has seen significant advancements in the industries. Therefore, this paper aims to further motivate interest in polyolefin research in academia by highlighting promising and open areas for the future. PMID:28788120

  15. Clinical Appliance of Laparo-Endoscopic Single-Site Surgery (LESS) in Urology.

    Science.gov (United States)

    Liatsikos, Evangelos; Kyriazis, Iason; Kallidonis, Panagiotis; Do, Minh; Anja, Anja; Rigopoulos, Christos; Al-Aown, Abdulrahman; Stolzenburg, Jens-Uwe

    2010-04-01

    Laparoscopy has gained a place in everyday surgical routine as an alternative surgical approach that decreases morbidity and postoperative hospitalization. Single port laparoscopic surgery has been introduced as a further development of laparoscopy. The feasibility and safety of single port laparoscopy is under extensive evaluation in specialized laparoscopic centers. Nevertheless, wide acceptance of the technique requires adequate documentation of the advantages of the approach over conventional laparoscopy and further refinement of surgical instrumentation to overcome intraoperative ergonomic problems.

  16. Compact Single Site Resolution Cold Atom Experiment for Adiabatic Quantum Computing

    Science.gov (United States)

    2016-02-03

    Specifically, we will design and construct a set of compact single atom traps with integrated optics, suitable for heralded entanglement and loophole...technical development is to achieve fast loading and qubit manipulation in the single- atom traps, which will enable our scientific investigation. The...goal of our scientific investigation is to demonstrate high fidelity and fast atom - atom entanglement between physically 1. REPORT DATE (DD-MM-YYYY) 4

  17. Characterization of the corrosion behavior of the carbon steel liner in Hanford Site single-shell tanks

    International Nuclear Information System (INIS)

    Anantatmula, R.P.; Schwenk, E.B.; Danielson, M.J.

    1994-06-01

    Six safety initiatives have been identified for accelerating the resolution of waste tank safety issues and closure of unreviewed safety questions. Safety Initiative 5 is to reduce safety and environmental risk from tank leaks. Item d of Safety Initiative 5 is to complete corrosion studies of single-shell tanks to determine failure mechanisms and corrosion control options to minimize further degradation by June 1994. This report has been prepared to fulfill Safety Initiative 5, Item d. The corrosion mechanisms that apply to Hanford Site single-shell tanks are stress corrosion cracking, pitting/crevice corrosion, uniform corrosion, hydrogen embrittlement, and microbiologically influenced corrosion. The corrosion data relevant to the single-shell tanks dates back three decades, when results were obtained from in-situ corrosion coupons in a few single-shell tanks. Since that time there have been intertank transfers, evaporation, and chemical alterations of the waste. These activities have changed the character and the present composition of the waste is not well characterized. All conclusions and recommendations are made in the absence of relevant laboratory experimental data and tank inspection data. The report attempts to identify the failure mechanisms by a literature survey of carbon steel data in environments similar to the single-shell tank wastes, and by a review of the work performed at the Savannah River Site where similar wastes are stored in similar carbon steel tanks. Based on these surveys, and in the absence of data specific to Hanford single-shell tanks, it may be concluded that the single-shell tanks identified as leakers failed primarily by stress corrosion cracking due to the presence of high nitrate/low hydroxide wastes and residual stresses. In addition, some failures may be attributed to pitting under crevices in low hydroxide locations

  18. Laparoendoscopic Single-Site Surgery (LESS) for Excision of a Seminal Vesicle Cyst Associated with Ipsilateral Renal Agenesis

    OpenAIRE

    Jang, Ki Don; Choi, Kyung Hwa; Yang, Seung Choul; Jang, Won Sik; Jang, Ji Young; Han, Woong Kyu

    2011-01-01

    We report a case of laparoendoscopic single-site surgery (LESS) for a symptomatic left seminal vesicular cyst and ipsilateral renal agenesis. A 49-year-old man presented with a 1-year history of severe irritation upon voiding and intractable, recurrent hematospermia. A computed tomography scan showed a 68×41×38 mm sized left seminal vesicular cyst with ipsilateral renal agenesis. LESS was performed successfully to treat the seminal vesicle cyst. The total operative time was 125 minutes, and b...

  19. New cobalt-mediated radical polymerization (CMRP of methyl methacrylate initiated by two single-component dinuclear β-diketone cobalt (II catalysts.

    Directory of Open Access Journals (Sweden)

    Feng Bao

    Full Text Available Two dinuclear cobalt complexes based on bis-diketonate ligands (ligand 1: 3,3'-(1,3-phenylenebis(1-phenylpropane-1,3-dione; ligand 2: 3,3'-(1,4-phenylenebis(1-phenylpropane-1,3-dione were successfully synthesized. The two neutral catalysts all showed satisfactory activities in the cobalt-mediated radical polymerization (CMRP of methyl methacrylate (MMA with the common initiator of azodiisobutyronitrile (AIBN. The resulting polymerizations have all of the characteristics of a living polymerization and displayed linear semilogarithmic kinetic plots, a linear correlation between the number-average molecular weight and the monomer conversion, and low polydispersities. Mono- or dicomponent low polydispersity polymers could be obtained by using the two dinuclear catalysts under proper reaction conditions. All these improvements facilitate the implementation of the acrylate CMRP and open the door to the scale-up of the syntheses and applications of the multicomponent low polydispersity polymers.

  20. Towards observing the encounter of the T7 DNA replication fork with a lesion site at the Single molecule level

    KAUST Repository

    Shirbini, Afnan

    2017-05-01

    Single-molecule DNA flow-stretching assays have been a powerful approach to study various aspects on the mechanism of DNA replication for more than a decade. This technique depends on flow-induced force on a bead attached to a surface-tethered DNA. The difference in the elastic property between double-strand DNA (long) and single-strand DNA (short) at low regime force allows the observation of the beads motion when the dsDNA is converted to ssDNA by the replisome machinery during DNA replication. Here, I aim to develop an assay to track in real-time the encounter of the bacteriophage T7 replisome with abasic lesion site inserted on the leading strand template. I optimized methods to construct the DNA substrate that contains the abasic site and established the T7 leading strand synthesis at the single molecule level. I also optimized various control experiments to remove any interference from the nonspecific interactions of the DNA with the surface. My work established the foundation to image the encounter of the T7 replisome with abasic site and to characterize how the interactions between the helicase and the polymerase could influence the polymerase proofreading ability and its direct bypass of this highly common DNA damage type.

  1. Oxidative dehydrogenation reaction of short alkanes on nanostructured carbon catalysts: a computational account.

    Science.gov (United States)

    Sun, XiaoYing; Han, Peng; Li, Bo; Mao, ShanJun; Liu, TianFu; Ali, Sajjad; Lian, Zan; Su, DangSheng

    2018-01-23

    Recent progress from first principles computational studies is presented for catalytic properties of nanostructured carbon catalysts in the oxidative dehydrogenation (ODH) reaction of short alkanes. Firstly, a brief introduction is given on the development of carbon catalysts in ODH since 1970. Oxygen functional groups have pivotal importance for ODH on nanostructured carbon catalysts. We discuss the oxidation process by HNO 3 on pristine and defective carbon materials. The interactions between the oxygen molecule (oxidant) and the nanostructured carbon catalysts are quantitatively calibrated. Moreover the different nucleophilic abilities of oxygen functional groups are carefully compared and the strongest nucleophilic sites are proposed. The active sites and detailed reaction pathway are revealed from several computational studies. Diketone/quinone groups are generally considered to be the active centers in ODH. A reaction pathway via radical formation is considered as the favorable path. Furthermore, single ketone and carbon sites are verified to be active in ODH from the analysis of aromaticity. Heteroatom doping effects in ODH are examined. Nitrogen doping is found to be very reactive towards oxygen molecule activation. Other dopants such as boron, phosphorous and sulfur also have positive effects on the reactivity of ODH. Extensive calculations suggest that the BEP relation is applicable for the doped nanostructured carbon catalysts. In the end, an outlook for the future direction of the computational study is supplied.

  2. The effect of metal ions as co-catalysts on acidic ionic liquid catalyzed single-step saccharification of corn stover in water.

    Science.gov (United States)

    Wiredu, Bernard; Amarasekara, Ananda S

    2015-01-01

    The effects of adding Cr(3+), Mn(2+), Fe(3+), Co(2+) Ni(2+), Cu(2+), Zn(2+) and La(3+) chlorides as co-catalysts to 1-(1-propylsulfonic)-3-methylimidazolium chloride acidic ionic liquid catalyzed saccharification of corn stover in aqueous medium was studied at 140-170 °C, by measuring the total reducing sugar (TRS) and glucose yields. The samples with Mn(2+), Fe(3+), Co(2+) as co-catalysts produced higher TRS yields compared to the sample without the metal ions. The Mn(2+) produced the highest catalytic effect enhancements and produced TRS yields of 68.0%, 72.9%, 90.2% and 87.9% at 140, 150, 160 and 170 °C respectively; whereas the corn stover samples without the Mn(2+) produced TRS yields of 42.9%, 52.3%, 54.4% and 53.5% at the same four temperatures. At higher temperatures of 160 and 170 °C, all metal ions studied produced significant enhancements in glucose yields, except Cr(3+). The addition of La(3+) as a co-catalyst produced the highest glucose yield improvement. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Atomically dispersed Pd catalysts in graphyne nanopore: formation and reactivity

    Science.gov (United States)

    Gu, Yongbing; Chen, Xianlang; Cao, Yongyong; Zhuang, Guilin; Zhong, Xing; Wang, Jianguo

    2017-07-01

    The formation of single-atom noble metal catalysts on carbon materials remains a challenge due to the weak interaction between metals and pristine carbon. By means of density functional theory (DFT) calculations, it is found that the atomically dispersed Pd in graphyne nanopore is much more stable than that of relative Pd clusters. The large diffusion barrier of Pd from the most stable hollow site to the bridge site confirms the kinetic stability of such structures. While CO adsorption causes the pulling of Pd from graphyne nanopore due to the low diffusion barrier, based on DFT calculations, which can be further confirmed by ab initio molecular dynamic simulations. Finally, CO oxidation on the reconstruction of Pd@graphyne exhibits an energy barrier of 0.62 eV in the rate-limiting step through the Langmuir-Hinshelwood mechanism. After the reaction, the catalyst can be restored to the original atomically dispersed state again. This study shows graphyne is an excellent support for an atomically dispersed or single-metal catalyst.

  4. A single nucleotide polymorphism in the human serotonin transporter introduces a new site for N-linked glycosylation

    DEFF Research Database (Denmark)

    Rasmussen, Trine Nygaard; Plenge, Per; Bay, Tina

    2009-01-01

    The human serotonin transporter (hSERT) is responsible for reuptake of serotonin (5-HT) from the synaptic cleft and is target for antidepressant medicine. Differential hSERT activity caused by genetic polymorphisms is believed to affect the risk of developing depression and, moreover, to affect...... the response to antidepressant therapy. The hSERT contains in the second extracellular loop (EL2) two sites for N-linked glycosylation that are critical for functional transporter expression. Here we examine a non-synonymous single nucleotide polymorphism (SNP) in EL2 that gives rise to a potential third...... as compared to hSERT in both cell systems. The increase in expression was accompanied by corresponding significant increases in the number of [(3)H]citalopram binding sites and in the V(max) for [(3)H]5-HT uptake. Characterization of mutants carrying all possible combinations of glycosylation sites...

  5. Consecutive Case Series of Healed Single-Molar Sites Immediately Restored with Wide-Diameter Implants: A 1-Year Evaluation

    Directory of Open Access Journals (Sweden)

    Hadi Antoun

    2016-01-01

    Full Text Available Introduction. To evaluate outcomes of wide-diameter (6 mm implants immediately provisionalized with cement-retained single crowns in posterior molar sites. Materials and Methods. Forty-eight consecutive patients received a total of 53 moderately rough-surface, 6 mm diameter implants in healed sites. All implants were immediately provisionalized with a cement-retained provisional crown. Final prosthesis with cement-retained porcelain fused to metal crowns was delivered 3–6 months later. Patients were followed up for 1 year. Outcome measures were implant failures and success rate, complications, marginal bone levels, bone level changes, papilla index, bleeding on probing, and inflammation. Results. One patient was lost to follow-up. At one year, the implant survival and success rate were 98.1%. The mean marginal bone loss after 1 year was −0.17±1.84 mm. Ideal papilla score was recorded at 83.8% of the sites. More than 95.6% of the sites showed no bleeding or inflammation. No procedure-related or device-related adverse events were reported. Conclusion. Wide-diameter (6 mm implants can safely and successfully replace single posterior molars. Longer follow-up studies are necessary to evaluate the long-term success of these implants.

  6. Consecutive Case Series of Healed Single-Molar Sites Immediately Restored with Wide-Diameter Implants: A 1-Year Evaluation

    Science.gov (United States)

    Cherfane, Pierre; Sojod, Bouchra

    2016-01-01

    Introduction. To evaluate outcomes of wide-diameter (6 mm) implants immediately provisionalized with cement-retained single crowns in posterior molar sites. Materials and Methods. Forty-eight consecutive patients received a total of 53 moderately rough-surface, 6 mm diameter implants in healed sites. All implants were immediately provisionalized with a cement-retained provisional crown. Final prosthesis with cement-retained porcelain fused to metal crowns was delivered 3–6 months later. Patients were followed up for 1 year. Outcome measures were implant failures and success rate, complications, marginal bone levels, bone level changes, papilla index, bleeding on probing, and inflammation. Results. One patient was lost to follow-up. At one year, the implant survival and success rate were 98.1%. The mean marginal bone loss after 1 year was −0.17 ± 1.84 mm. Ideal papilla score was recorded at 83.8% of the sites. More than 95.6% of the sites showed no bleeding or inflammation. No procedure-related or device-related adverse events were reported. Conclusion. Wide-diameter (6 mm) implants can safely and successfully replace single posterior molars. Longer follow-up studies are necessary to evaluate the long-term success of these implants. PMID:27195008

  7. A General Catalyst for Site-Selective C(sp(3))-H Bond Amination of Activated Secondary over Tertiary Alkyl C(sp(3))-H Bonds.

    Science.gov (United States)

    Scamp, Ryan J; Jirak, James G; Dolan, Nicholas S; Guzei, Ilia A; Schomaker, Jennifer M

    2016-06-17

    The discovery of transition metal complexes capable of promoting general, catalyst-controlled and selective carbon-hydrogen (C-H) bond amination of activated secondary C-H bonds over tertiary alkyl C(sp(3))-H bonds is challenging, as substrate control often dominates when reactive nitrene intermediates are involved. In this letter, we report the design of a new silver complex, [(Py5Me2)AgOTf]2, that displays general and good-to-excellent selectivity for nitrene insertion into propargylic, benzylic, and allylic C-H bonds over tertiary alkyl C(sp(3))-H bonds.

  8. Site-Based Services for Residents of Single-Room Occupancy Hotels.

    Science.gov (United States)

    Shepard, Melanie

    1997-01-01

    Describes an evaluation of an innovative site-based service program, the Growth and Achievement Program (GAP). Results show that GAP clients had significantly higher gain scores than did the comparison group and were less likely to rely on public financial assistance as their primary source of income. (RJM)

  9. Single-port access laparoscopic abdominoperineal resection through the colostomy site: a case report

    DEFF Research Database (Denmark)

    Lauritsen, Morten; Bulut, O

    2012-01-01

    Single-port access (SPA) laparoscopic surgery is emerging as an alternative to conventional laparoscopic and open surgery, although its benefits still have to be determined. We present the case of a 87-year-old woman who underwent abdominoperineal resection (APR) with SPA. The abdominal part...

  10. Geology Data Package for the Single-Shell Tank Waste Management Areas at the Hanford Site

    Energy Technology Data Exchange (ETDEWEB)

    Reidel, Steve P.; Chamness, Mickie A.

    2007-01-01

    This data package discusses the geology of the single-shell tank (SST) farms and the geologic history of the area. The focus of this report is to provide the most recent geologic information available for the SST farms. This report builds upon previous reports on the tank farm geology and Integrated Disposal Facility geology with information available after those reports were published.

  11. An introduction to catalyst

    International Nuclear Information System (INIS)

    Jeon, Hak Je

    1988-11-01

    This book explains basic conception of catalyst such as definition, velocity of chemical reaction and velocity of catalyst reaction, absorption with absorption energy and chemical absorption, pore structure with the role of pore and measurement of pore structure, catalyst activity on solid structure, electrical property on catalyst activity, choice and design of catalyst, catalytic reaction with reaction velocity and chemical equilibrium and reaction velocity model, measurement of reaction velocity and material analysis, catalyst for mixed compound, catalyst for solid acid and catalyst for supported metal.

  12. From Chlorella to Nestlike Framework Constructed with Doped Carbon Nanotubes: A Biomass-Derived, High-Performance, Bifunctional Oxygen Reduction/Evolution Catalyst.

    Science.gov (United States)

    Wang, Guanghua; Deng, Yijie; Yu, Jinnan; Zheng, Long; Du, Li; Song, Huiyu; Liao, Shijun

    2017-09-20

    The development of effective bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is significant for energy conversion systems, such as Li-air batteries, fuel cells, and water splitting technologies. Herein, a Chlorella-derived catalyst with a nestlike framework, composed of bamboolike nanotubes that encapsulate cobalt nanoparticles, has been prepared through a facile pyrolysis process. It achieves perfect bifunctional catalysis both in ORR and OER on a single catalyst. For our optimal catalyst Co/M-Chlorella-900, its ORR half-wave potential is positively shifted by 40 mV compared to that of a commercial Pt/C catalyst, and the overpotential at 10 mA cm -2 for the OER is 23 mV lower than that of a commercial IrO 2 /C catalyst in an alkaline medium. This superior bifunctional catalytic performance is benefited from the simultaneous increase of pyridinic N sites for ORR and graphitic N sites for OER. In addition, N-doped carbon-encapsulated Co nanoparticles improve both ORR and OER performance by forming new active centers. The unique nestlike carbon nanotube framework not only afforded highly dense ORR and OER active sites but also promoted the electron and mass transfer. Our catalyst also displays notable durability during the ORR and OER, making it promising for use in ORR/OER-related energy conversion systems.

  13. Engineering Favorable Morphology and Structure of Fe-N-C Oxygen-Reduction Catalysts through Tuning of Nitrogen/Carbon Precursors.

    Science.gov (United States)

    Gupta, Shiva; Zhao, Shuai; Ogoke, Ogechi; Lin, Ye; Xu, Hui; Wu, Gang

    2017-02-22

    Structures and morphologies of Fe-N-C catalysts are believed to be crucial because of the number of active sites and local bonding structures governing the overall catalyst performance for the oxygen reduction reaction (ORR). However, the knowledge how to rationally design catalysts is still lacking. By combining different nitrogen/carbon precursors, including polyaniline (PANI), dicyandiamide (DCDA), and melamine (MLMN), we aim to tune catalyst morphology and structure to facilitate the ORR. Instead of the commonly studied single precursors, multiple precursors were used during the synthesis; this provides a new opportunity to promote catalyst activity and stability through a likely synergistic effect. The best-performing Fe-N-C catalyst derived from PANI+DCDA is superior to the individual PANI or DCDA-derived ones. In particular, when compared to the extensively explored PANI-derived catalysts, the binary precursors have an increased half-wave potential of 0.83 V and an enhanced electrochemical stability in challenging acidic media, indicating a significantly increased number of active sites and strengthened local bonding structures. Multiple key factors associated with the observed promotion are elucidated, including the optimal pore size distribution, highest electrochemically active surface area, presence of dominant amorphous carbon, and thick graphitic carbon layers with more pyridinic nitrogen edge sites likely bonded with active atomic iron. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Multiple nucleophilic elbows leading to multiple active sites in a single module esterase from Sorangium cellulosum

    DEFF Research Database (Denmark)

    Udatha, D.B.R.K. Gupta; Madsen, Karina Marie; Panagiotou, Gianni

    2015-01-01

    The catalytic residues in carbohydrate esterase enzyme families constitute a highly conserved triad: serine, histidine and aspartic acid. This catalytic triad is generally located in a very sharp turn of the protein backbone structure, called the nucleophilic elbow and identified by the consensus...... sequence GXSXG. An esterase from Sorangium cellulosum Soce56 that contains five nucleophilic elbows was cloned and expressed in Escherichia coli and the function of each nucleophilic elbowed site was characterized. In order to elucidate the function of each nucleophilic elbow, site directed mutagenesis....... To our knowledge, this is the first report presenting the role of multiple nucleophilic elbows in the catalytic promiscuity of an esterase. Further structural analysis at protein unit level indicates the new evolutionary trajectories in emerging promiscuous esterases....

  15. Site selective Cu2+ substitution in single crystal Fe3O4 biocompatible nanospheres by solvothermal reflux method

    Science.gov (United States)

    Manohar, A.; Krishnamoorthi, C.

    2017-09-01

    Transition metal cations distribution among tetrahedral and octahedral sites in Fe3O4 has profound influence on it properties. The cations distribution among these sites were influenced by crystal field stabilization energy (CFSE) of a substituent ion. It was reported that Cu2+ substitutes both Fe3+ in tetrahedral and Fe2+ in octahedral sites of magnetite though it has high CFSE for octahedral sites. Thus it promotes mixed (normal & inverse) spinel structure and hence the properties deviate from the prediction. Here we show that selective octahedral site substitution of Fe2+ by Cu2+ in single crystal Fe3O4 nanoparticles was possible by solvothermal reflux method at moderate temperatures (≈300 °C). It was attributed to reduced energy barrier for crystallization and high diffusion coefficient of the metal cations at moderate temperature in low viscous organic solvents mixture, at ambient pressure, compared to coprecipitation and solid state reaction protocols. In addition, effective removal of exothermic crystal lattice energy, released during nucleation and growth process, by natural gas bubbles formed in the reflux organic solvent mixture. This promotes effective diffusion of cations during the growth process and easy octahedral occupation by Cu2+ in Fe1-xCuxFe2O4 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5 & 0.6) single crystal nanospheres. The octahedral substitution was confirmed by reduction of crystal lattice parameter as well as ferromagnetic strength of octahedral sublattice with enhanced Cu2+ concentration. In addition, morphology, lattice vibrational frequency and electron excitation spectra of the nanospheres were studied. The Langevin function fit analysis reveals that superparamagnetic domain diameter were slightly less than the particle diameter obtained from TEM micrograph.

  16. Single-nucleotide mutation matrix: a new model for predicting the NF-κB DNA binding sites.

    Science.gov (United States)

    Du, Wenxin; Gao, Jing; Wang, Tingting; Wang, Jinke

    2014-01-01

    In this study, we established a single nucleotide mutation matrix (SNMM) model based on the relative binding affinities of NF-κB p50 homodimer to a wild-type binding site (GGGACTTTCC) and its all single-nucleotide mutants detected with the double-stranded DNA microarray. We evaluated this model by scoring different groups of 10-bp DNA sequences with this model and analyzing the correlations between the scores and the relative binding affinities detected with three wet experiments, including the electrophoresis mobility shift assay (EMSA), the protein-binding microarray (PBM) and the systematic evolution of ligands by exponential enrichment-sequencing (SELEX-Seq). The results revealed that the SNMM scores were strongly correlated with the detected binding affinities. We also scored the DNA sequences with other three models, including the principal coordinate (PC) model, the position weight matrix scoring algorithm (PWMSA) model and the Match model, and analyzed the correlations between the scores and the detected binding affinities. In comparison with these models, the SNMM model achieved reliable results. We finally determined 0.747 as the optimal threshold for predicting the NF-κB DNA-binding sites with the SNMM model. The SNMM model thus provides a new alternative model for scoring the relative binding affinities of NF-κB to the 10-bp DNA sequences and predicting the NF-κB DNA-binding sites.

  17. Site-Specific SERS Assay for Survivin Protein Dimer: From Ensemble Experiments to Correlative Single-Particle Imaging.

    Science.gov (United States)

    Wissler, Jörg; Bäcker, Sandra; Feis, Alessandro; Knauer, Shirley K; Schlücker, Sebastian

    2017-08-01

    An assay for Survivin, a small dimeric protein which functions as modulator of apoptosis and cell division and serves as a promising diagnostic biomarker for different types of cancer, is presented. The assay is based on switching on surface-enhanced Raman scattering (SERS) upon incubation of the Survivin protein dimer with Raman reporter-labeled gold nanoparticles (AuNP). Site-specificity is achieved by complexation of nickel-chelated N-nitrilo-triacetic acid (Ni-NTA) anchors on the particle surface by multiple histidines (His 6 -tag) attached to each C-terminus of the centrosymmetric protein dimer. Correlative single-particle analysis using light sheet laser microscopy enables the simultaneous observation of both elastic and inelastic light scattering from the same sample volume. Thereby, the SERS-inactive AuNP-protein monomers can be directly discriminated from the SERS-active AuNP-protein dimers/oligomers. This information, i.e. the percentage of SERS-active AuNP in colloidal suspension, is not accessible from conventional SERS experiments due to ensemble averaging. The presented correlative single-particle approach paves the way for quantitative site-specific SERS assays in which site-specific protein recognition by small chemical and in particular supramolecular ligands can be tested. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Structure, Mobility, and Composition of Transition Metal Catalyst Surfaces. High-Pressure Scanning Tunneling Microscopy and Ambient-Pressure X-ray Photoelectron Spectroscopy Studies

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Zhongwei [Univ. of California, Berkeley, CA (United States)

    2013-12-06

    Surface structure, mobility, and composition of transition metal catalysts were studied by high-pressure scanning tunneling microscopy (HP-STM) and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) at high gas pressures. HP-STM makes it possible to determine the atomic or molecular rearrangement at catalyst surfaces, particularly at the low-coordinated active surface sites. AP-XPS monitors changes in elemental composition and chemical states of catalysts in response to variations in gas environments. Stepped Pt and Cu single crystals, the hexagonally reconstructed Pt(100) single crystal, and Pt-based bimetallic nanoparticles with controlled size, shape and composition, were employed as the model catalysts for experiments in this thesis.

  19. [Laparoendoscopic single-site surgery in gynecology: the situation in 2013].

    Science.gov (United States)

    Rabischong, B; Compan, C; Savary, D; Bourdel, N; Canis, M; Mage, G; Botchorishvili, R

    2013-09-01

    Single-incision laparoscopic surgery (SILS) is a recent technic of minimally invasive surgery that arouses a growing interest due to its potential benefits in terms of pain and cosmetic. However, in gynecology as well as in other surgical specialties, preliminary results seem to be controversial. Its feasibility and interest by comparison with conventional laparoscopy (CL) have not been confirmed by randomized multicenter studies. Compare in gynecological surgery, feasibility and surgical outcomes (conversion rate and complications, postoperative pain, duration of surgery, length of hospital stay, appearance and cost) between SILS and CL. For this, a review of the literature from a PUBMED and Medline databases was conducted. The clinical cases and series with fewer than 10 patients were excluded. Eligible data were compared and analyzed. A total of 46 studies including five prospective randomized were studied in gynecology. Conversion rates and complications appear identical to those of the CL. The learning curve is also comparable. The technique is not standardized and some ergonomic problems are described. Operating time and duration of hospitalization seems to be comparable. The postoperative pain assessment found conflicting results. The cosmetic results are in favor of the single incision laparoscopy. Finally, the cost is higher. According to the literature, the single incision laparoscopy seems feasible and safe, with better cosmetic results. But the cost is increased and associated with no benefit in terms of pain, operating time and duration of hospitalization. Beyond cosmetics results, further randomized studies are needed to identify a possible benefit. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  20. Single species victory in a two-site, two-species model of population dispersion

    Science.gov (United States)

    Waddell, Jack; Sander, Len; Kessler, David

    2008-03-01

    We study the behavior of two species, differentiated only by their dispersal rates in an environment providing heterogeneous growth rates. Previous deterministic studies have shown that the slower-dispersal species always drives the faster species to extinction, while stochastic studies show that the opposite case can occur given small enough population and spatial heterogeneity. Other models of similar systems demonstrate the existence of an optimum dispersal rate, suggesting that distinguishing the species as faster or slower is insufficient. We here study the interface of these models for a small spatial system and determine the conditions of stability for a single species outcome.

  1. Well-defined silica supported bipodal molybdenum oxo alkyl complexes: a model of the active sites of industrial olefin metathesis catalysts.

    Science.gov (United States)

    Merle, Nicolas; Le Quéméner, Frédéric; Barman, Samir; Samantaray, Manoja K; Szeto, Kai C; De Mallmann, Aimery; Taoufik, Mostafa; Basset, Jean-Marie

    2017-10-12

    A well-defined, silica-supported molybdenum oxo alkyl species, ([triple bond, length as m-dash]SiO-) 2 Mo([double bond, length as m-dash]O)(CH 2 t Bu) 2 , was prepared by the selective grafting of Mo([double bond, length as m-dash]O)(CH 2 t Bu) 3 Cl onto a silica partially dehydroxylated at 200 °C using a rigorous surface organometallic chemistry approach. The immobilized bipodal surface species, partly resembling the active species of industrial MoO 3 /SiO 2 olefin metathesis catalysts, exhibited excellent functional group tolerance in conjunction with its high activity in homocoupling, self and ring closing olefin metathesis.

  2. Well-defined silica supported bipodal molybdenum oxo alkyl complexes: a model of the active sites of industrial olefin metathesis catalysts

    KAUST Repository

    Merle, Nicolas

    2017-09-25

    A well-defined, silica-supported molybdenum oxo alkyl species, ([triple bond, length as m-dash]SiO-)2Mo([double bond, length as m-dash]O)(CH2tBu)2, was prepared by the selective grafting of Mo([double bond, length as m-dash]O)(CH2tBu)3Cl onto a silica partially dehydroxylated at 200 °C using a rigorous surface organometallic chemistry approach. The immobilized bipodal surface species, partly resembling the active species of industrial MoO3/SiO2 olefin metathesis catalysts, exhibited excellent functional group tolerance in conjunction with its high activity in homocoupling, self and ring closing olefin metathesis.

  3. Preparation of Pt-Re/Vulcan carbon nanocomposites using a single-source molecular precursor and relative performance as a direct methanol fuel cell electrooxidation catalyst.

    Science.gov (United States)

    Anderson, Angela D; Deluga, Gregg A; Moore, Joshua T; Vergne, Matthew J; Hercules, David M; Kenik, Edward A; Lukehart, C M

    2004-09-01

    Pt-Re/Vulcan carbon powder nanocomposites have been prepared with total metal loadings of 18 wt.% and 40 wt.% using a new non-cluster (1:1)-PtRe bimetallic precursor as the source of metal. Pt-Re nanoparticles having an average diameter of ca. 6 nm and atomic stoichiometry near 1:1 are formed. TEM, on-particle HR-EDS, and powder XRD data are consistent with the formation of Pt-Re alloy nanoparticles having a hexagonal unit cell with cell constants of a = 2.77 A and c = 4.47 A. A nanocomposite prepared at higher total metal loading under more rigorous thermal treatment also contains Pt-Re alloy nanoparticles having a fcc unit cell structure (a = 3.95 A). The precise dependence of Pt-Re nanocrystal structure on the thermal history of the nanocomposite specimen has not been investigated in detail. While these Pt-Re/carbon nanocomposites are active as anode catalysts in operating direct methanol fuel cells, the measured performance is less than that of commercial Pt-Ru/carbon catalysts and has marginal practical importance.

  4. Preliminary recommendations on the design of the characterization program for the Hanford Site single-shell tanks: A system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Buck, J.W.; Peffers, M.S.; Hwang, S.T.

    1991-11-01

    The work described in this volume was conducted by Pacific Northwest Laboratory to provide preliminary recommendations on data quality objectives (DQOs) to support the Waste Characterization Plan (WCP) and closure decisions for the Hanford Site single-shell tanks (SSTs). The WCP describes the first of a two-phase characterization program that will obtain information to assess and implement disposal options for SSTs. This work was performed for the Westinghouse Hanford Company (WHC), the current operating contractor on the Hanford Site. The preliminary DQOs contained in this volume deal with the analysis of SST wastes in support of the WCP and final closure decisions. These DQOs include information on significant contributors and detection limit goals (DLGs) for SST analytes based on public health risk.

  5. Evaluation of a Single-Beam Sonar System to Map Seagrass at Two Sites in Northern Puget Sound, Washington

    Science.gov (United States)

    Stevens, Andrew W.; Lacy, Jessica R.; Finlayson, David P.; Gelfenbaum, Guy

    2008-01-01

    Seagrass at two sites in northern Puget Sound, Possession Point and nearby Browns Bay, was mapped using both a single-beam sonar and underwater video camera. The acoustic and underwater video data were compared to evaluate the accuracy of acoustic estimates of seagrass cover. The accuracy of the acoustic method was calculated for three classifications of seagrass observed in underwater video: bare (no seagrass), patchy seagrass, and continuous seagrass. Acoustic and underwater video methods agreed in 92 percent and 74 percent of observations made in bare and continuous areas, respectively. However, in patchy seagrass, the agreement between acoustic and underwater video was poor (43 percent). The poor agreement between the two methods in areas with patchy seagrass is likely because the two instruments were not precisely colocated. The distribution of seagrass at the two sites differed both in overall percent vegetated and in the distribution of percent cover versus depth. On the basis of acoustic data, seagrass inhabited 0.29 km2 (19 percent of total area) at Possession Point and 0.043 km2 (5 percent of total area) at the Browns Bay study site. The depth distribution at the two sites was markedly different. Whereas the majority of seagrass at Possession Point occurred between -0.5 and -1.5 m MLLW, most seagrass at Browns Bay occurred at a greater depth, between -2.25 and -3.5 m MLLW. Further investigation of the anthropogenic and natural factors causing these differences in distribution is needed.

  6. Quick Guide to Flash Catalyst

    CERN Document Server

    Elmansy, Rafiq

    2011-01-01

    How do you transform user interface designs created in Photoshop or Illustrator into interactive web pages? It's easier than you think. This guide shows you how to use Adobe Flash Catalyst to create interactive UIs and website wireframes for Rich Internet Applications-without writing a single line of code. Ideal for web designers, this book introduces Flash Catalyst basics with detailed step-by-step instructions and screenshots that illustrate every part of the process. You'll learn hands-on how to turn your static design or artwork into working user interfaces that can be implemented in Fla

  7. Numerical solution of the relativistic single-site scattering problem for the Coulomb and the Mathieu potential

    Science.gov (United States)

    Geilhufe, Matthias; Achilles, Steven; Köbis, Markus Arthur; Arnold, Martin; Mertig, Ingrid; Hergert, Wolfram; Ernst, Arthur

    2015-11-01

    For a reliable fully-relativistic Korringa-Kohn-Rostoker Green function method, an accurate solution of the underlying single-site scattering problem is necessary. We present an extensive discussion on numerical solutions of the related differential equations by means of standard methods for a direct solution and by means of integral equations. Our implementation is tested and exemplarily demonstrated for a spherically symmetric treatment of a Coulomb potential and for a Mathieu potential to cover the full-potential implementation. For the Coulomb potential we include an analytic discussion of the asymptotic behaviour of irregular scattering solutions close to the origin (r\\ll 1 ).

  8. Screened Coulomb interactions in metallic alloys. II. Screening beyond the single-site and atomic-sphere approximations

    DEFF Research Database (Denmark)

    Ruban, Andrei; Simak, S.I.; Korzhavyi, P.A.

    2002-01-01

    -electron potential and energy. In the case of a random alloy such interactions can be accounted for only by lifting the atomic-sphere and single-site approximations, in order to include the polarization due to local environment effects. Nevertheless, a simple parametrization of the screened Coulomb interactions......A quantitative description of the configurational part of the total energy of metallic alloys with substantial atomic size difference cannot be achieved in the atomic-sphere approximation: It needs to be corrected at least for the multipole-moment interactions in the Madelung part of the one...

  9. Laparoendoscopic single-site surgery (LESS) for excision of a seminal vesicle cyst associated with ipsilateral renal agenesis.

    Science.gov (United States)

    Jang, Ki Don; Choi, Kyung Hwa; Yang, Seung Choul; Jang, Won Sik; Jang, Ji Young; Han, Woong Kyu

    2011-06-01

    We report a case of laparoendoscopic single-site surgery (LESS) for a symptomatic left seminal vesicular cyst and ipsilateral renal agenesis. A 49-year-old man presented with a 1-year history of severe irritation upon voiding and intractable, recurrent hematospermia. A computed tomography scan showed a 68×41×38 mm sized left seminal vesicular cyst with ipsilateral renal agenesis. LESS was performed successfully to treat the seminal vesicle cyst. The total operative time was 125 minutes, and blood loss was minimal. The patient was discharged from the hospital on the second postoperative day.

  10. Identification of single-shell tank in-tank hardware obstructions to retrieval at Hanford Site Tank Farms

    International Nuclear Information System (INIS)

    Ballou, R.A.

    1994-10-01

    Two retrieval technologies, one of which uses robot-deployed end effectors, will be demonstrated on the first single-shell tank (SST) waste to be retrieved at the Hanford Site. A significant impediment to the success of this technology in completing the Hanford retrieval mission is the presence of unique tank contents called in-tank hardware (ITH). In-tank hardware includes installed and discarded equipment and various other materials introduced into the tank. This paper identifies those items of ITH that will most influence retrieval operations in the arm-based demonstration project and in follow-on tank operations within the SST farms

  11. Dual catalyst bed concept for catalytic partial oxidation of methane to synthesis gas

    NARCIS (Netherlands)

    Zhu, J.J.; Mujeebur Rahuman, M.S.M.; van Ommen, J.G.; Lefferts, Leonardus

    2004-01-01

    A system with two catalyst beds instead of one single metal catalyst bed is proposed for catalytic partial oxidation of methane (CPOM) to synthesis gas. In this dual catalyst bed system, an irreducible stable oxide, such as yttrium-stabilized zirconia (YSZ), is used in the first catalyst bed to

  12. Development of active, and stable water-gas-shift reaction catalysts for fuel cell applications

    NARCIS (Netherlands)

    Azzam, K.G.H.; Babich, Igor V.; Seshan, Kulathu Iyer; Lefferts, Leon

    2006-01-01

    Water-gas-shift (WGS) reaction CO + H2O = CO2 + H2, is a key step in the generation of H2 for fuel cells. Noble metal-based catalysts are promising single stage WGS catalysts because they less sensitive than LTS catalysts (Cu based) and more active than the HTS (Ni) catalysts. High activity in CO

  13. The alveolar process following single-tooth extraction: a study of maxillary incisor and premolar sites in man.

    Science.gov (United States)

    Misawa, Mônica; Lindhe, Jan; Araújo, Mauricio G

    2016-07-01

    The present investigation was performed to determine some dimensional alterations that occur in the alveolar process of the incisor and premolar sites of the maxilla following tooth removal. Computer-assisted cone-beam computed tomography (CBCT) scans were obtained from the maxilla using an iCAT unit, and involved edentulous and contralateral tooth sites. For each site included in the study, parasagittal and axial reconstructions, 1 mm apart, were made and measurements of different variables (cross-sectional area, height, and width) performed. The study involved 69 subjects and disclosed that the cross-sectional area and the height and width of the alveolar process of the lateral incisor site were the smallest and those of the second premolar the largest. All parameters had been significantly reduced after the completion of the ≥1 year of healing. Thus, the overall (i) cross-sectional area was reduced from 99.1 to 65.0 mm(2) , (ii) the height from 11.5 to 9.5 mm, and (iii) the width from 8.5 to 3.2 mm (marginal 1/3(rd) ), 8.9 to 4.8 mm (middle portion), and 9.0 to 5.7 mm (apical portion). The removal of single tooth caused marked hard tissue diminution. The loss of hard tissue was most pronounced in the buccal and marginal portions of the edentulous ridge that in most sites had acquired a triangular shape. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  14. Pressure pyrolysed non-precious oxygen reduction catalysts for proton exchange membrane fuel cells

    Science.gov (United States)

    Nallathambi, Vijayadurga

    2011-12-01

    Worldwide energy demand has driven long-term efforts towards developing a clean, hydrogen-based energy economy. Polymer electrolyte membrane fuel cells (PEMFC) are low emissions and high efficiency devices that utilize the power of hydrogen and are a key enabling technology for the hydrogen economy. Carbon supported platinum-black is the state-of the art catalyst for oxygen reduction in a PEMFC because it can withstand the acidic environment. However, the high cost and low abundance of this precious metal has limited large-scale commercialization of PEMFCs. Current efforts focus on developing alternative inexpensive, non-noble metal-based catalysts for oxygen reduction with performance comparable to conventional platinum based electrocatalysts. In this work, inexpensive metal-nitrogen-carbon (MNC) catalysts have been synthesized by pyrolyzing transition metal and nitrogen precursors together with high surface area carbon materials in a closed, constant-volume quartz tube. High pressure generated due to nitrogen precursor evaporation lead to increased surface nitrogen content in the catalysts post-pyrolysis. Electrochemical oxygen reduction activity of MNC catalysts was analyzed using half-cell Rotating Ring Disc Electrode (RRDE) studies. The effect of nitrogen precursor morphology on the generation of active sites has been explored in detail. By increasing the Nitrogen/Carbon ratio of the nitrogen precursor, the accessible active site density increased by reducing carbon deposition in the pores of the carbon support during pyrolysis. The most active catalysts were obtained using melamine, having a N/C ratio of 2. Single PEMFC measurements employing MNC catalysts as cathodes indicated kinetic current density as high as 15 A cm-3 at 0.8 ViR-free and over 100 h of stable current at 0.5 V were observed. Effects of carbon free ammonia generating solid nitrogen precursors such as urea and ammonium carbamate were also studied. These precursors etched the carbon support

  15. Robotic-assisted laparoendoscopic single-site surgery (R-LESS) in urology: an evidence-based analysis.

    Science.gov (United States)

    Barret, E; Sanchez-Salas, R; Ercolani, M; Forgues, A; Rozet, F; Galiano, M; Cathelineau, X

    2011-06-01

    The objective of this manuscript is to provide an evidence-based analysis of the current status and future perspectives of robotic laparoendoscopic single-site surgery (R-LESS). A PubMed search has been performed for all relevant urological literature regarding natural orifice transluminal endoscopic surgery (NOTES) and laparoendoscopic single-site surgery (LESS). All clinical and investigative reports for robotic LESS and NOTES procedures in the urological literature have been considered. A significant number of clinical urological procedures have been successfully completed utilizing R-LESS procedures. The available experience is limited to referral centers, where the case volume is sufficient to help overcome the challenges and learning curve of LESS surgery. The robotic interface remains the best fit for LESS procedures but its mode of use continues to evolve in attempts to improve surgical technique. We stand today at the dawn of R-LESS surgery, but this approach may well become the standard of care in the near future. Further technological development is needed to allow widespread adoption of the technique.

  16. Safety and Efficacy of Single-site Phacotrabeculectomy With Mitomicin C Using Nylon and Polyglactin Suture for Scleral Tunnel Closure.

    Science.gov (United States)

    Vijaya, Lingam; David, Rathini L

    2015-01-01

    To evaluate the efficacy of polyglactin use along with nylon suture in scleral tunnel closure after single-site phacotrabeculectomy. This retrospective case series included 139 eyes of 139 patients who had scleral tunnel closure with 1 polyglactin and 1 nylon suture after single-site phacotrabeculectomy with a low dose of mitomycin C between 2002 and 2005. The intraocular pressure (IOP), the visual acuity, the number of glaucoma medications, postoperative complications, and interventions were the outcomes measured. The majority of them had primary open-angle glaucoma (93 eyes, 67%), 93 eyes (67%) had severe glaucomatous optic neuropathy, and 77 eyes (55.3%) had severe visual-field loss. The IOP decreased from a mean preoperative value of 18.1±5.3 mm Hg on a mean number of 1.8±0.8 glaucoma medications to mean IOPs of 13.3±4.6, 14.0±4.3, and 11.8±3.9 mm Hg on a mean number of 0.2±0.6, 0.3±0.7, 0.5±1.0 glaucoma medications (PNylon suturelysis with laser was performed in 16 eyes (11.5%). The technique used here seems to be effective in controlling the IOP and has very minimal associated complications.

  17. Cosmetic outcomes of laparoendoscopic single-site hysterectomy compared with multi-port surgery: randomized controlled trial.

    Science.gov (United States)

    Song, Taejong; Cho, Juhee; Kim, Tae-Joong; Kim, Im-Ryung; Hahm, Tae Soo; Kim, Byoung-Gie; Bae, Duk-Soo

    2013-01-01

    To compare cosmetic satisfaction with laparoendoscopic single-site surgery (LESS) compared with multi-port surgery. Randomized controlled trial (Canadian Task Force classification I). University hospital. Twenty women who underwent laparoscopically-assisted vaginal hysterectomy (LAVH) via LESS or multi-port surgery. Laparoendoscopic single-site surgery or multi-port surgery. Cosmetic satisfaction was assessed using the Body Image Questionnaire at baseline and at 1, 4, and 24 weeks after surgery. Of the 20 LESS procedures, 1 was converted to multi-port surgery because of severe adhesions, and 1 woman assigned to undergo multi-port surgery was lost to follow-up. The 2 surgery groups did not differ in clinical demographic data and surgical results or postoperative pain scores at 12, 24, and 36 hours. Compared with the multi-port group, the LESS group reported significantly higher cosmetic satisfaction at 1, 4, and 24 weeks after surgery (p surgery, LESS is not only a feasible approach with comparable operative outcomes but also has an advantage insofar as cosmetic outcome. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

  18. Alkali-labile sites and post-irradiation effects in single-stranded DNA induced by H radicals

    International Nuclear Information System (INIS)

    Lafleur, M.V.M.; Heuvel, N. van; Woldhuis, J.; Loman, H.

    1978-01-01

    Single-stranded phiX174 DNA in aqueous solutions has been irradiated in the absence of oxygen, under conditions in which H radicals react with the DNA. It was shown that H radical reactions result in breaks, which contribute approximately 10 per cent inactivation. Further, two types of alkali-labile sites were formed. One was lethal and gave rise to single-strand breaks by alkali and was most probably identical with post-irradiation heat damage and contributed about 33 per cent to the inactivation mentioned above. The other consisted of non-lethal damage, partly dihydropyrimidine derivatives, and was converted to lethal damage by alkali. This followed from experiments in which the DNA was treated with osmium-tetroxide, which oxidized thymine to 5,6-dihydroxydihydrothymine. Treatment with alkali of this DNA gave the same temperature dependence as found for the non-lethal alkali-labile sites in irradiated DNA. A similar temperature dependence was found for dihydrothymine and irradiated pyrimidines with alkali. (author)

  19. A single-chamber microbial fuel cell for rapid determination of biochemical oxygen demand using low-cost activated carbon as cathode catalyst.

    Science.gov (United States)

    Wang, Ying; Liu, Xianhua; Wang, Meiyu; Zhang, Pingping; Zong, Yanping; Zhang, Qiufeng

    2017-09-13

    The biochemical oxygen demand (BOD) is widely used for the evaluation of water and wastewater quality. However, the conventional method to measure BOD is time-consuming and requires complicated processes. In this study, a Microbial fuel cell (MFC)-based BOD sensor was developed by using low-cost activated carbon as the cathode catalyst. The sensor was calibrated with an aerated nutrient medium containing sodium acetate as the BOD source. When the sensor was operated with an external resistance of 1 K Ω, linear correlation (R 2  = 0.9965) was obtained for BOD concentrations ranging from 80 to 1280 mg/L in a reaction time of 50 h. Besides acetate, glucose/glutamic acid (GGA) and ethanol could also be analyzed by the sensor. In a low concentration range (200 mg/L), the relationship between GGA solution concentration and output voltage was in accord with Monod growth kinetics.

  20. A sequential vesicle pool model with a single release sensor and a ca(2+)-dependent priming catalyst effectively explains ca(2+)-dependent properties of neurosecretion

    DEFF Research Database (Denmark)

    Walter, Alexander M; da Silva Pinheiro, Paulo César; Verhage, Matthijs

    2013-01-01

    identified. We here propose a Sequential Pool Model (SPM), assuming a novel Ca(2+)-dependent action: a Ca(2+)-dependent catalyst that accelerates both forward and reverse priming reactions. While both models account for fast fusion from the Readily-Releasable Pool (RRP) under control of synaptotagmin-1...... - synaptotagmin-1 - slower Ca(2+)-dependent release components persist. These findings have provoked working models involving parallel releasable vesicle pools (Parallel Pool Models, PPM) driven by alternative Ca(2+) sensors for release, but no slow release sensor acting on a parallel vesicle pool has been......, the origins of slow release differ. In the SPM the slow release component is attributed to the Ca(2+)-dependent refilling of the RRP from a Non-Releasable upstream Pool (NRP), whereas the PPM attributes slow release to a separate slowly-releasable vesicle pool. Using numerical integration we compared model...

  1. Design and evaluation of a variable stiffness manual operating platform for laparoendoscopic single site surgery (LESS).

    Science.gov (United States)

    Li, Jinhua; Li, Xuejie; Wang, Jianchen; Xing, Yuan; Wang, Shuxin; Ren, Xiangyun

    2017-12-01

    Most of the existing robotic platforms for LESS have workspace and load capacity weaknesses, because of the limitation of one single incision. We have developed a LESS manual operating platform of which the stiffness of the insertion tube is controllable. The system included two dexterous tool manipulators, a stereo-vision module and a variable stiffness insertion tube (VSIT), which was designed using phase-change material (mixed indium, gallium and stannum). Experiments to evaluate the effectiveness of the VSIT were set up. Peg transfer tasks and trajectory tracking tasks were conducted to assess the initial performance of the overall system. The experimental results for stiffness characteristic suggested that the rigidity of the VSIT with a straight-forward pose was considerably increased by about four times in the rigid mode. Peg transfer tasks and trajectory tracking tasks were performed successfully with an average time of 97 s and 52 s, respectively. The experimental results for stiffness characteristic showed that the manual operating platform had great promise for solving large workspace, high manipulation force and stability problems in LESS. The tool manipulators had the ability to achieve basic operations. Copyright © 2017 John Wiley & Sons, Ltd.

  2. Use of Hydrogen Chemisorption and Ethylene Hydrogenation as Predictors for Aqueous Phase Reforming of Lactose over Ni@Pt and Co@Pt Bimetallic Overlayer Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Qinghua; Skoglund, Michael D.; Zhang, Chen; Morris, Allen R.; Holles, Joseph H.

    2016-10-20

    Overlayer Pt on Ni (Ni@Pt) or Co (Co@Pt) were synthesized and tested for H2 generation from APR of lactose. H2 chemisorption descriptor showed that Ni@Pt and Co@Pt overlayer catalysts had reduced H2 adsorption strength compared to a Pt only catalyst, which agree with computational predictions. The overlayer catalysts also demonstrated lower activity for ethylene hydrogenation than the Pt only catalyst, which likely resulted from decreased H2 binding strength decreasing the surface coverage of H2. XAS results showed that overlayer catalysts exhibited higher white line intensity than the Pt catalyst, which indicates a negative d-band shift for the Pt overlayer, further providing evidence for overlayer formation. Lactose APR studies showed that lactose can be used as feedstock to produce H2 and CO under desirable reaction conditions. The Pt active sites of Ni@Pt and Co@Pt overlayer catalysts showed significantly enhanced H2 production selectivity and activity when compared with that of a Pt only catalyst. The single deposition overlayer with the largest d-band shift showed the highest H2 activity. The results suggest that overlayer formation using directed deposition technique could modify the behavior of the surface metal and ultimately modify the APR activity.

  3. Exploring both sequence detection and restriction endonuclease cleavage kinetics by recognition site via single-molecule microfluidic trapping.

    Science.gov (United States)

    Xu, Weilin; Muller, Susan J

    2011-02-07

    We demonstrate the feasibility of a single-molecule microfluidic approach to both sequence detection and obtaining kinetic information for restriction endonucleases on dsDNA. In this method, a microfluidic stagnation point flow is designed to trap, hold, and linearize double-stranded (ds) genomic DNA to which a restriction endonuclease has been pre-bound sequence-specifically. By introducing the cofactor magnesium, we determine the binding location of the enzyme by the cleavage process of dsDNA as in optical restriction mapping, however here the DNA need not be immobilized on a surface. We note that no special labeling of the enzyme is required, which makes it simpler than our previous scheme using stagnation point flows for sequence detection. Our accuracy in determining the location of the recognition site is comparable to or better than other single molecule techniques due to the fidelity with which we can control the linearization of the DNA molecules. In addition, since the cleavage process can be followed in real time, information about the cleavage kinetics, and subtle differences in binding and cleavage frequencies among the recognition sites, may also be obtained. Data for the five recognition sites for the type II restriction endonuclease EcoRI on λ-DNA are presented as a model system. While the roles of the varying fluid velocity and tension along the chain backbone on the measured kinetics remain to be determined, we believe this new method holds promise for a broad range of studies of DNA-protein interactions, including the kinetics of other DNA cleavage processes, the dissociation of a restriction enzyme from the cleaved substrate, and other macromolecular cleavage processes.

  4. Early Australian experience in robotic sleeve gastrectomy: a single site series.

    Science.gov (United States)

    Silverman, Candice D; Ghusn, Michael A

    2017-05-01

    The use of robotic platforms in bariatric surgery has recently gained relevance. With an increased use of this technology come concerns regarding learning curve effects during the initial implementation phase. The sleeve gastrectomy though may represent an ideal training procedure for introducing the robot into bariatric surgical practice. The present review of the first 10 consecutive robotic sleeve gastrectomy procedures performed in an Australian bariatric programme by a single surgeon describes the evolution of the technique, learning curve and initial patient outcomes. Between 2014 and 2015, robotic sleeve gastrectomies were performed as primary and revisional procedures by a consistent surgeon-assistant team. Technique evolution and theatre set-up were documented. Patient demographics, operative time (robot docking and total operation time), additional operative procedures performed, operative and post-operative complications at 1, 3 and 6 months post-procedure and weight loss achieved at 6 months were retrospectively reviewed from a prospectively maintained database. Ten robotic sleeve gastrectomies were performed without significant operative complications. One patient was treated as an outpatient with oral antibiotics for a superficial wound infection. The median total operative time was 123 min (interquartile range (IQR) 108.8-142.5), with a median incision to docking time of 19 min (IQR 15.0-31.8). Length of stay in hospital was 2-3 days. Median excess weight loss achieved at 6 months was 50% (IQR 33.9-66.5). This study describes a method of safely introducing the da Vinci robot into bariatric surgical practice. © 2016 Royal Australasian College of Surgeons.

  5. Supported Single-Site Ti(IV) on a Metal–Organic Framework for the Hydroboration of Carbonyl Compounds

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhiyuan [College; amp, Molecular Sciences, Institute of Advanced Studies, Wuhan University, Wuhan 430072, PR China; Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Liu, Dong [College; amp, Molecular Sciences, Institute of Advanced Studies, Wuhan University, Wuhan 430072, PR China; Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Camacho-Bunquin, Jeffrey [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Zhang, Guanghui [Department; Yang, Dali [College; amp, Molecular Sciences, Institute of Advanced Studies, Wuhan University, Wuhan 430072, PR China; Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; López-Encarnación, Juan M. [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Department; Xu, Yunjie [Department; Ferrandon, Magali S. [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Niklas, Jens [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Poluektov, Oleg G. [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Jellinek, Julius [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Lei, Aiwen [College; amp, Molecular Sciences, Institute of Advanced Studies, Wuhan University, Wuhan 430072, PR China; Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Bunel, Emilio E. [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States; Delferro, Massimiliano [Chemical; amp, Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States

    2017-10-10

    ABSTRACT: A stable and structurally well-defined titanium alkoxide catalyst supported on a metal-organic-framework (MOF) of UiO-67 topology (ANL1-Ti(OiPr)2) was synthesized and fully characterized by a variety of analytical and spectroscopic techniques, including BET, TGA, PXRD, XAS, DRIFT, SEM, and DFT computations. The Ti-functionalized MOF was demonstrated active for the catalytic hydroboration of a wide range of aldehydes and ketones with HBpin as the boron source. Compared to traditional homogeneous and supported hydroboration catalysts, ANL1-Ti(OiPr)2 is completely recyclable and reusable, making it a promising hydroboration catalyst alternative for green and sustainable chemical synthesis. DFT calculations suggest that the catalytic hydroboration proceeds via a (1) hydride transfer between the active Ti-hydride species and a carbonyl moiety (rate determining step), and (2) alkoxide transfer (intramolecular σ-bond metathesis) to generate the boronate ester product.

  6. A Temperature Window for the Synthesis of Single-Walled Carbon Nanotubes by Catalytic Chemical Vapor Deposition of CH4over Mo2-Fe10/MgO Catalyst

    Directory of Open Access Journals (Sweden)

    Yu Ouyang

    2009-01-01

    Full Text Available Abstract A temperature window for the synthesis of single-walled carbon nanotubes by catalytic chemical vapor deposition of CH4over Mo2-Fe10/MgO catalyst has been studied by Raman spectroscopy. The results showed that when the temperature is lower than 750 °C, there were few SWCNTs formed, and when the temperature is higher than 950 °C, mass amorphous carbons were formed in the SWCNTs bundles due to the self-decomposition of CH4. The temperature window of SWCNTs efficient growth is between 800 and 950 °C, and the optimum growth temperature is about 900 °C. These results were supported by transmission electron microscope images of samples formed under different temperatures. The temperature window is important for large-scale production of SWCNTs by catalytic chemical vapor deposition method.

  7. Nonprecious Metal Catalysts for Oxygen Reduction in Heterogeneous Aqueous Systems.

    Science.gov (United States)

    Gewirth, Andrew A; Varnell, Jason A; DiAscro, Angela M

    2018-01-31

    A comprehensive review of recent advances in the field of oxygen reduction electrocatalysis utilizing nonprecious metal (NPM) catalysts is presented. Progress in the synthesis and characterization of pyrolyzed catalysts, based primarily on the transition metals Fe and Co with sources of N and C, is summarized. Several synthetic strategies to improve the catalytic activity for the oxygen reduction reaction (ORR) are highlighted. Recent work to explain the active-site structures and the ORR mechanism on pyrolyzed NPM catalysts is discussed. Additionally, the recent application of Cu-based catalysts for the ORR is reviewed. Suggestions and direction for future research to develop and understand NPM catalysts with enhanced ORR activity are provided.

  8. Fluidised bed catalytic pyrolysis of scrap tyres: influence of catalyst:tyre ratio and catalyst temperature.

    Science.gov (United States)

    Williams, Paul T; Brindle, Alexander J

    2002-12-01

    Pyrolysis with on-line Zeolite catalysis of scrap tyres was undertaken in a fluidised bed reactor with the aim of maximising the production of higher value single ring aromatic hydrocarbons in the derived oil. Experiments were carried out in relation to the ratio of the catalyst to tyre feedstock and the temperature of the catalyst bed. Two Zeolite catalysts were examined, a Y-type Zeolite catalyst and Zeolite ZSM-5 catalyst of differing pore size and surface activity. The composition of the oils derived from the uncatalysed fluidised bed pyrolysis of tyres showed that benzene concentration was 0.2 wt%, toluene concentration was 0.8 wt%, o-xylene was 0.3 wt%, m/p-xylenes were 1.8 wt% and limonene was 4.3 wt%. Benzene, toluene and xylenes present in the oils showed a significant increase in the presence of both of the catalysts. The maximum concentrations of these chemicals for the Y-Zeolite (CBV-400) catalyst was 1 wt% for benzene, 8wt% for toluene, 3 wt% for o-xylene and 8.5 wt% for m/p-xylenes, produced at a catalyst:tyre ratio of 1.5. There was less influence of catalyst temperature on the yield of benzene, toluene and xylenes, however, increasing the temperature of the catalyst resulted in a marked decrease in limonene concentration. The Y-type Zeolite catalyst produced significantly higher concentrations of benzene, toluene and xylenes which was attributed to the larger pore size and higher surface acidity of the Y-Zeolite catalyst compared to the Zeolite ZSM-5 catalyst.

  9. Ovarian Suspension With Adjustable Sutures: An Easy and Helpful Technique for Facilitating Laparoendoscopic Single-Site Gynecologic Surgery.

    Science.gov (United States)

    Chen, Kuo-Hu; Chen, Li-Ru; Seow, Kok-Min

    2015-01-01

    To describe a method of ovarian suspension with adjustable sutures (OSAS) for facilitating laparoendoscopic single-site gynecologic surgery (LESS) and to investigate the effect of OSAS on LESS. Prospective cohort study (Canadian Task Force classification: II-2). University teaching hospital. One hundred seventy-eight patients with benign 5- to 15-cm cystic ovarian tumors who underwent LESS with OSAS (suspension group, n = 90) and without OSAS (control group, n = 88). For patients who underwent OSAS (suspension group), 1 end of double-head straight needles with a polypropylene suture was inserted into the pelvic cavity through the abdominal skin to penetrate the cyst or ovarian parenchyma and puncture outside the abdominal skin. After cutting off the needles, both sides of the remaining suture were held together by a clamp, without knotting, so that the manipulator could "lift," "loosen," or "fix" the stitches to adjust the tension. The average time to create OSAS was 2.9 min. For the suspension and control groups, the average blood loss was 81.4 and 131.8 mL (p < .001), and the operative time was 42.0 and 61.3 min (p < .001), respectively. There were no significant differences in the incidence of complications (5.6% vs 9.1%; p = .365), but there were significant differences in conversions to standard non-single-site laparoscopy (5.6% vs 15.9%; p = .025) and laparotomy (1.1% vs 6.8%; p = .040). Logistic regression analysis revealed that the ratios of conversion to standard non-single-site laparoscopy (odds ratio [OR], 0.126; 95% confidence interval [CI], 0.311-0.508) and laparotomy (OR, 0.032; 95% CI, 0.002-0.479) were much lower in the suspension group; the risk of complications was comparable (OR, 0.346; 95% CI, 0.085-1.403). OSAS is an easy, safe, and feasible method that offers advantages during LESS. Although routine use of OSAS is not necessary, OSAS can be considered during LESS to facilitate the surgery. Copyright © 2015 AAGL. Published by Elsevier Inc. All

  10. A sequential vesicle pool model with a single release sensor and a Ca(2+-dependent priming catalyst effectively explains Ca(2+-dependent properties of neurosecretion.

    Directory of Open Access Journals (Sweden)

    Alexander M Walter

    Full Text Available Neurotransmitter release depends on the fusion of secretory vesicles with the plasma membrane and the release of their contents. The final fusion step displays higher-order Ca(2+ dependence, but also upstream steps depend on Ca(2+. After deletion of the Ca(2+ sensor for fast release - synaptotagmin-1 - slower Ca(2+-dependent release components persist. These findings have provoked working models involving parallel releasable vesicle pools (Parallel Pool Models, PPM driven by alternative Ca(2+ sensors for release, but no slow release sensor acting on a parallel vesicle pool has been identified. We here propose a Sequential Pool Model (SPM, assuming a novel Ca(2+-dependent action: a Ca(2+-dependent catalyst that accelerates both forward and reverse priming reactions. While both models account for fast fusion from the Readily-Releasable Pool (RRP under control of synaptotagmin-1, the origins of slow release differ. In the SPM the slow release component is attributed to the Ca(2+-dependent refilling of the RRP from a Non-Releasable upstream Pool (NRP, whereas the PPM attributes slow release to a separate slowly-releasable vesicle pool. Using numerical integration we compared model predictions to data from mouse chromaffin cells. Like the PPM, the SPM explains biphasic release, Ca(2+-dependence and pool sizes in mouse chromaffin cells. In addition, the SPM accounts for the rapid recovery of the fast component after strong stimulation, where the PPM fails. The SPM also predicts the simultaneous changes in release rate and amplitude seen when mutating the SNARE-complex. Finally, it can account for the loss of fast- and the persistence of slow release in the synaptotagmin-1 knockout by assuming that the RRP is depleted, leading to slow and Ca(2+-dependent fusion from the NRP. We conclude that the elusive 'alternative Ca(2+ sensor' for slow release might be the upstream priming catalyst, and that a sequential model effectively explains Ca(2+-dependent

  11. Highly efficient nonprecious metal catalyst prepared with metal–organic framework in a continuous carbon nanofibrous network

    Science.gov (United States)

    Shui, Jianglan; Chen, Chen; Grabstanowicz, Lauren; Zhao, Dan; Liu, Di-Jia

    2015-01-01

    Fuel cell vehicles, the only all-electric technology with a demonstrated >300 miles per fill travel range, use Pt as the electrode catalyst. The high price of Pt creates a major cost barrier for large-scale implementation of polymer electrolyte membrane fuel cells. Nonprecious metal catalysts (NPMCs) represent attractive low-cost alternatives. However, a significantly lower turnover frequency at the individual catalytic site renders the traditional carbon-supported NPMCs inadequate in reaching the desired performance afforded by Pt. Unconventional catalyst design aiming at maximizing the active site density at much improved mass and charge transports is essential for the next-generation NPMC. We report here a method of preparing highly efficient, nanofibrous NPMC for cathodic oxygen reduction reaction by electrospinning a polymer solution containing ferrous organometallics and zeolitic imidazolate framework followed by thermal activation. The catalyst offers a carbon nanonetwork architecture made of microporous nanofibers decorated by uniformly distributed high-density active sites. In a single-cell test, the membrane electrode containing such a catalyst delivered unprecedented volumetric activities of 3.3 A⋅cm−3 at 0.9 V or 450 A⋅cm−3 extrapolated at 0.8 V, representing the highest reported value in the literature. Improved fuel cell durability was also observed. PMID:26261338

  12. Wegner estimate and localization for alloy-type models with sign-changing exponentially decaying single-site potentials

    Science.gov (United States)

    Leonhardt, Karsten; Peyerimhoff, Norbert; Tautenhahn, Martin; Veselić, Ivan

    2015-05-01

    We study Schrödinger operators on L2(ℝd) and ℓ2(ℤd) with a random potential of alloy-type. The single-site potential is assumed to be exponentially decaying but not necessarily of fixed sign. In the continuum setting, we require a generalized step-function shape. Wegner estimates are bounds on the average number of eigenvalues in an energy interval of finite box restrictions of these types of operators. In the described situation, a Wegner estimate, which is polynomial in the volume of the box and linear in the size of the energy interval, holds. We apply the established Wegner estimate as an ingredient for a localization proof via multiscale analysis.

  13. Current status and future perspectives in laparoendoscopic single-site and natural orifice transluminal endoscopic urological surgery.

    Science.gov (United States)

    Autorino, Riccardo; Stein, Robert J; Lima, Estevão; Damiano, Rocco; Khanna, Rakesh; Haber, Georges-Pascal; White, Michael A; Kaouk, Jihad H

    2010-05-01

    Objective of this study is to provide an evidence-based analysis of the current status and future perspectives of scarless urological surgery. A PubMed search has been performed for all relevant urological literature regarding natural orifice transluminal endoscopic surgery (NOTES) and laparoendoscopic single-site surgery (LESS). In addition, experience with LESS and NOTES at our own institution has been considered. All clinical and investigative reports for LESS and NOTES procedures in the urological literature have been considered. A wide variety of clinical procedures in urology have been successfully completed by using LESS techniques. Thus far, experience with NOTES has largely been investigational, although early clinical reports are emerging. Further development of instrumentation and platforms is necessary for both techniques to become more widely adopted throughout the urological community.

  14. The use of expanding ports in laparo-endoscopic single-site surgery may cause more pain

    DEFF Research Database (Denmark)

    Dressler, Jannie; Jorgensen, Lars N

    2017-01-01

    BACKGROUND: Previous meta-analyses on the clinical outcome after laparo-endoscopic single-site surgery (LESS) versus conventional laparoscopic surgery (CLS) have not revealed any major differences in postoperative pain between the two procedures. This meta-analysis aims to evaluate the difference...... for randomized clinical trials (RCTs) on LESS versus CLS for general abdominal procedures. Weighted mean difference (WMD) and Odds ratios (OR) were calculated with 95% confidence intervals (CI). RESULTS: A total of 29 RCTs with 2999 procedures were included. Pain (VAS 0-10) 6 h after surgery was significantly...... in LESSex procedures compared to CLS, OR = 1.94 (1.03-3.63). CONCLUSION: The present meta-analysis indirectly indicates that the type of access device that is used for an abdominal LESS procedure may contribute to the development of early postoperative pain as the use of a non-expanding model was associated...

  15. Glutamates 78 and 122 in the active site of saccharopine dehydrogenase contribute to reactant binding and modulate the basicity of the acid-base catalysts.

    Science.gov (United States)

    Ekanayake, Devi K; Andi, Babak; Bobyk, Kostyantyn D; West, Ann H; Cook, Paul F

    2010-07-02

    Saccharopine dehydrogenase catalyzes the NAD-dependent oxidative deamination of saccharopine to give l-lysine and alpha-ketoglutarate. There are a number of conserved hydrophilic, ionizable residues in the active site, all of which must be important to the overall reaction. In an attempt to determine the contribution to binding and rate enhancement of each of the residues in the active site, mutations at each residue are being made, and double mutants are being made to estimate the interrelationship between residues. Here, we report the effects of mutations of active site glutamate residues, Glu(78) and Glu(122), on reactant binding and catalysis. Site-directed mutagenesis was used to generate E78Q, E122Q, E78Q/E122Q, E78A, E122A, and E78A/E122A mutant enzymes. Mutation of these residues increases the positive charge of the active site and is expected to affect the pK(a) values of the catalytic groups. Each mutant enzyme was completely characterized with respect to its kinetic and chemical mechanism. The kinetic mechanism remains the same as that of wild type enzymes for all of the mutant enzymes, with the exception of E78A, which exhibits binding of alpha-ketoglutarate to E and E.NADH. Large changes in V/K(Lys), but not V, suggest that Glu(78) and Glu(122) contribute binding energy for lysine. Shifts of more than a pH unit to higher and lower pH of the pK(a) values observed in the V/K(Lys) pH-rate profile of the mutant enzymes suggests that the presence of Glu(78) and Glu(122) modulates the basicity of the catalytic groups.

  16. Multi-institutional Experience in Laparoendoscopic Single-site Surgery (LESS): For Major Extirpative and Reconstructive Procedures in Pediatric Urology.

    Science.gov (United States)

    Gor, Ronak A; Long, Christopher J; Shukla, Aseem R; Kirsch, Andrew J; Perez-Brayfield, Marcos; Srinivasan, Arun K

    2016-02-01

    To review peri-procedural outcomes from a large, multi-institutional series of pediatric urology patients treated with laparaendoscopic single-site surgery (LESS) for major extirpative and reconstructive procedures. Consecutive LESS cases between January 2011 and May 2014 from three free-standing pediatric referral centers were reviewed. Data include age, sex, operative time, blood loss, length of stay, and complications according to the modified Clavien-Dindo classification. Hasson technique was used for peritoneal entry, GelPOINT advanced access platform was inserted, and standard 5mm laparoscopic instruments were used. Fifty-nine patients (median age 5 years, 4 months-17 years) met inclusion criteria: 29 nephrectomies, 9 nephroureterectomies, 3 bilateral nephrectomies, 5 heminephrectomies, 5 renal cyst decortications, 3 bilateral gonadectomies, 2 Malone antegrade continence enema, 2 calyceal diverticulectomy, and 1 ovarian detorsion with cystectomy. Median operative times for each case type were comparable to published experiences with traditional laparoscopy. Overall mean and median length of stay was 36.2 hours and 1 day, respectively. There were two complications: port site hernia requiring surgical repair (Clavien IIIb) and a superficial port site infection that resolved with antibiotics (Clavien II). Cosmetic outcomes were subjectively well received by patients and their parents. Operative time was significantly shorter between the first half of the experience and the second half (102 vs 70 minutes, P  <  .05). LESS approach can be broadly applied across many major extirpative and reconstructive procedures within pediatric urology. Our series advances our field's utilization of this technique and its safety. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Stability of detectability over 17 years at a single site and other lizard detection comparisons from Guam

    Science.gov (United States)

    Rodda, Gordon H.; Dean-Bradley, Kathryn; Campbell, Earl W.; Fritts, Thomas H.; Lardner, Bjorn; Yackel Adams, Amy A.; Reed, Robert N.

    2015-01-01

    To obtain quantitative information about population dynamics from counts of animals, the per capita detectabilities of each species must remain constant over the course of monitoring. We characterized lizard detection constancy for four species over 17 yr from a single site in northern Guam, a relatively benign situation because detection was relatively easy and we were able to hold constant the site, habitat type, species, season, and sampling method. We monitored two species of diurnal terrestrial skinks (Carlia ailanpalai [Curious Skink], Emoia caeruleocauda [Pacific Bluetailed Skink]) using glueboards placed on the ground in the shade for 3 h on rainless mornings, yielding 10,286 skink captures. We additionally monitored two species of nocturnal arboreal geckos (Hemidactylus frenatus [Common House Gecko]; Lepidodactylus lugubris [Mourning Gecko]) on the basis of 15,212 sightings. We compared these count samples to a series of complete censuses we conducted from four or more total removal plots (everything removed to mineral soil) totaling 400 m2(about 1% of study site) in each of the years 1995, 1999, and 2012, providing time-stamped quantification of detectability for each species. Unfortunately, the actual population trajectories taken by the four species were masked by unexplained variation in detectability. This observation of debilitating latent variability in lizard detectability under nearly ideal conditions undercuts our trust in population estimation techniques that fail to quantify venue-specific detectability, rely on pooled detection probability estimates, or assume that modulation in predefined environmental covariates suffices for estimating detectability.

  18. Chemical imaging of catalyst deactivation during the conversion of renewables at the single particle level: etherification of biomass-based polyols with alkenes over H-Beta zeolites.

    Science.gov (United States)

    Parvulescu, Andrei N; Mores, Davide; Stavitski, Eli; Teodorescu, Cristian M; Bruijnincx, Pieter C A; Gebbink, Robertus J M Klein; Weckhuysen, Bert M

    2010-08-04

    The etherification of biomass-based alcohols with various linear alpha-olefins under solvent-free conditions was followed in a space- and time-resolved manner on 9 microm large H-Beta zeolite crystals by confocal fluorescence microscopy. This allowed us to visualize the interaction with the substrate and distribution of the coke products into the catalyst at the level of an individual zeolite crystal during the etherification process. The spectroscopic information obtained on the micrometer-scale zeolite was in line with the results obtained with bulk characterization techniques and further confirmed by the catalytic results obtained both for micrometer-scale and nanoscale zeolites. This allowed us to explain the influence of the substrate type (glycerol, glycols, and alkenes) and zeolite properties (Si/Al ratio and particle size) on the etherification activity. The etherification of the biomass-based alcohols takes place mainly on the external surface of the zeolite particles. The gradual blockage of the external surface of the zeolite results in a partial or total loss of etherification activity. The deactivation could be attributed to olefin oligomerization. The high conversions obtained in the etherification of 1,2-propylene glycol with long linear alkenes (up to 80%) and the pronounced deactivation of the zeolite observed in the etherification of glycerol with long linear alkenes (max. 20% conversion) were explained by the spectroscopic measurements and is due to differences in the adsorption, i.e., in the center of the zeolite particle for glycerol and on the external surface in the case of glycols.

  19. Sustainable Applications of Magnetic Nano-catalysts and Graphitic Carbon Nitrides (presentation)

    Science.gov (United States)

    Homogeneous catalysts, known for chemo-, regio- and enantioselectivity, have better contact with the reactants but the catalyst separation creates barriers. Heterogeneous systems enable better separation although at the cost of reduction in the availability of active sites. Becau...

  20. Final Technical Report: Metal—Organic Surface Catalyst for Low-temperature Methane Oxidation: Bi-functional Union of Metal—Organic Complex and Chemically Complementary Surface

    Energy Technology Data Exchange (ETDEWEB)

    Tait, Steven L. [Indiana Univ., Bloomington, IN (United States)

    2016-10-01

    Stabilization and chemical control of transition metal centers is a critical problem in the advancement of heterogeneous catalysts to next-generation catalysts that exhibit high levels of selectivity, while maintaining strong activity and facile catalyst recycling. Supported metal nanoparticle catalysts typically suffer from having a wide range of metal sites with different coordination numbers and varying chemistry. This project is exploring new possibilities in catalysis by combining features of homogeneous catalysts with those of heterogeneous catalysts to develop new, bi-functional systems. The systems are more complex than traditional heterogeneous catalysts in that they utilize sequential active sites to accomplish the desired overall reaction. The interaction of metal—organic catalysts with surface supports and their interactions with reactants to enable the catalysis of critical reactions at lower temperatures are at the focus of this study. Our work targets key fundamental chemistry problems. How do the metal—organic complexes interact with the surface? Can those metal center sites be tuned for selectivity and activity as they are in the homogeneous system by ligand design? What steps are necessary to enable a cooperative chemistry to occur and open opportunities for bi-functional catalyst systems? Study of these systems will develop the concept of bringing together the advantages of heterogeneous catalysis with those of homogeneous catalysis, and take this a step further by pursuing the objective of a bi-functional system. The use of metal-organic complexes in surface catalysts is therefore of interest to create well-defined and highly regular single-site centers. While these are not likely to be stable in the high temperature environments (> 300 °C) typical of industrial heterogeneous catalysts, they could be applied in moderate temperature reactions (100-300 °C), made feasible by lowering reaction temperatures by better catalyst control. They also

  1. Catalysis: Elusive active site in focus

    Science.gov (United States)

    Labinger, Jay A.

    2016-08-01

    The identification of the active site of an iron-containing catalyst raises hopes of designing practically useful catalysts for the room-temperature conversion of methane to methanol, a potential fuel for vehicles. See Letter p.317

  2. Transumbilical laparoendoscopic single-site radical prostatectomy and cystectomy with the aid of a transurethral port: a feasibility study.

    Science.gov (United States)

    Su, Jian; Zhu, Qingyi; Yuan, Lin; Zhang, Yang; Zhang, Qingling; Wei, Yunfei

    2018-01-01

    To describe the surgical technique and report early outcomes of transurethral assisted laparoendoscopic single-site (LESS) radical prostatectomy (RP) and LESS radical cystectomy (RC) in a single institution. Between December 2014 and March 2016, a total of 114 LESS RPs and RCs were performed, comprising 68 LESS RPs, 38 LESS RCs with cutaneous ureterostomy (CU) and eight LESS RCs with orthotopic ileal neobladder (OIN). Access was achieved via a single-port, with four channels placed through a transumblical incision. After the apex of prostate was separated from the urethra, a self-developed port ('Zhu's port') was inserted through the urethra to facilitate resection of prostate and urethrovesical anastomosis. The peri-operative and postoperative data were collected and analysed retrospectively. Patients were followed up postoperatively for evidence of long-term side effects. All the procedures were completed successfully. No conversion to conventional laparoscopic surgery was necessary. For LESS RP, the average operating time was 152 min. Estimated blood loss was 117 mL. The mean hospital stay was 16.4 days after surgery. For LESS RC with CU and LESS RC with OIN, the mean operating times were 215 and 328 min, mean estimated blood loss was 175 and 252 mL, and mean hospital stay was 9.4 and 18.2 days, respectively. Six patients required blood transfusion (5.26%). Intra-operative complications occurred in two patients (1.75%), and postoperative complications in nine (7.89%). Fourteen out of 68 (20.6%) patients who underwent LESS RP had positive surgical margins. Follow-up ranged from 10 to 30.6 months. In the prostate cancer cases, good urinary control was observed in 35.3%, 97.1% and 100% of patients at 1, 6 and 12 months after the operation, respectively, while biochemical recurrence was observed in 11.8% patients. In the bladder cancer cases, two patients had local recurrence and two patients had distant metastasis. Our results showed that LESS RP and LESS RC

  3. Productions of palm oil bio diesel whit heterogeneous basic catalysts compared to conventional homogeneous catalysts

    International Nuclear Information System (INIS)

    Rios, Luis A; Franco C, Alexander; Zuleta S, Ernesto

    2009-01-01

    The conventional process to produce biodiesel involves the presence of homogeneous basic catalysts. However, these catalysts have disadvantages associated to the need of purification steps, which increase the cost of the final product and generate pollution problems caused by the effluents. This paper compares different homogeneous and heterogeneous catalysts for the biodiesel production from palm oil. For this, heterogeneous catalysts supported on alumina were prepared and characterized by nitrogen adsorption, scanning electron microscopy, energy dispersive X ray spectroscopy and X ray diffraction. Transesterification of palm oil with methanol was accomplished at 60 celsius degrade and one hour, varying methanol/oil ratio, the type of catalyst and its concentration. Yields of the reaction and purity of the so obtained biodiesel were evaluated. Comparing the catalysts performance, based on the amount, was found that sodium methoxide (CH 3 ONa) and potassium carbonate supported on alumina (K 2 CO 3 /Al 2 O 3 ) were the catalysts that give the higher purity of biodiesel (96.8 and 95.85% respectively). When was determined the active site quality, by dividing the performance by each mole of active sites, it was found that calcined Na 2 SO 4 /Al 2 O 3 has the most active sites.

  4. Phosphine-Free EWG-Activated Ruthenium Olefin Metathesis Catalysts

    Science.gov (United States)

    Grela, Karol; Szadkowska, Anna; Michrowska, Anna; Bieniek, Michal; Sashuk, Volodymyr

    Hoveyda-Grubbs catalyst has been successfully fine-tuned by us in order to increase its activity and applicability by the introduction of electron-withdrawing groups (EWGs) to diminish donor properties of the oxygen atom. As a result, the stable and easily accessible nitro-substituted Hoveyda-Grubbs catalyst has found a number of successful applications in various research and industrial laboratories. Some other EWG-activated Hoveyda-type catalysts are commercially available. The results described herewith demonstrate that the activity of ruthenium (Ru) metathesis catalysts can be enhanced by introduction of EWGs without detriment to catalysts stability. Equally noteworthy is the observation that different Ru catalysts turned out to be optimal for different applications. This shows that no single catalyst outperforms all others in all possible applications.

  5. Silica-supported (nBuCp)2ZrCl2: Effect of catalyst active center distribution on ethylene-1-hexene copolymerization

    KAUST Repository

    Atiqullah, Muhammad

    2013-08-12

    Metallocenes are a modern innovation in polyolefin catalysis research. Therefore, two supported metallocene catalysts-silica/MAO/(nBuCp)2ZrCl2 (Catalyst 1) and silica/nBuSnCl3/MAO/(nBuCp)2ZrCl2 (Catalyst 2), where MAO is methylaluminoxane-were synthesized, and subsequently used to prepare, without separate feeding of MAO, ethylene-1-hexene Copolymer 1 and Copolymer 2, respectively. Fouling-free copolymerization, catalyst kinetic stability and production of free-flowing polymer particles (replicating the catalyst particle size distribution) confirmed the occurrence of heterogeneous catalysis. The catalyst active center distribution was modeled by deconvoluting the measured molecular weight distribution and copolymer composition distribution. Five different active center types were predicted for each catalyst, which was corroborated by successive self-nucleation and annealing experiments, as well as by an extended X-ray absorption fine structure spectroscopy report published in the literature. Hence, metallocenes impregnated particularly on an MAO-pretreated support may be rightly envisioned to comprise an ensemble of isolated single sites that have varying coordination environments. This study shows how the active center distribution and the design of supported MAO anions affect copolymerization activity, polymerization mechanism and the resulting polymer microstructures. Catalyst 2 showed less copolymerization activity than Catalyst 1. Strong chain transfer and positive co-monomer effect-both by 1-hexene-were common. Each copolymer demonstrated vinyl, vinylidene and trans-vinylene end groups, and compositional heterogeneity. All these findings were explained, as appropriate, considering the modeled active center distribution, MAO cage structure repeat units, proposed catalyst surface chemistry, segregation effects and the literature that concerns and supports this study. While doing so, new insights were obtained. Additionally, future research, along the direction

  6. Catalysts, additives, environment head up CMRA meeting agenda

    International Nuclear Information System (INIS)

    Kiesche, E.S.

    1993-01-01

    Technology leadership in catalyst and additives were hot topics at the Chemical Management and Resources Association's (Staten Island, NY) meeting in Cincinnati last week. In particular, the advent of metallocene single-site catalyst (SSC) are likely to alter the dynamics of the plastics landscape, suggest Gregory McPike, v.p./Exxpol at Exxon Chemical. As SSC technology - which allows accurate tailoring of polymers - gains momentum, the delineation between SSC licensers and licensees will increase, McPike says. And he expects that with only few producers able to afford the huge amount of time and money it takes to develop metallocene technology, there will be proliferation of alliances; Exxon itself has a partnership with Mitsui to develop gas-phase polyethylene. But McPike also expects higher profits and growth for those with metallocene technology, as SSC-based polymers penetrate other than polyolefins. McPike says Exxon plans to license the technology in the next two years for commodity markets. Increased environmental regulations are creating opportunities in catalysts and in water treatment chemicals, speakers noted

  7. Single Pellet String Reactor for Intensification of Catalyst Testing in Gas/Liquid/Solid Configuration Réacteur catalytique de type “filaire” pour l’intensification de tests catalytiques en configuration gaz/liquide/solide

    Directory of Open Access Journals (Sweden)

    Hipolito A.I.

    2010-09-01

    Full Text Available Catalyst improvement is a key route toward process improvement in terms of yield, energy efficiency and selectivity optimization. The catalyst development strategy includes catalyst testing on a model or real feedstock. This key step has been the focus of many studies during the last decades concerning reactor design, analytical tool development and operating procedures. Most studies aim to determine catalytic grain activity in isothermal conditions so as to be able to understand and predict the kinetics. With catalyst improvement, in the lab-scale reactors available, the mass transfer rate can become the limiting step compared with the reaction rate, especially for fast exothermic reactions. A new reactor geometry is proposed to intensify the mass transfer and to accelerate the fluid superficial velocities: the single pellet string reactor. To characterize this new geometry, a hydrodynamic study was carried out in a horizontal single pellet string reactor with a 4.0 × 4.0 mm2 square section, filled with spherical particles of diameter varying between 2.0 and 4.0 mm. In this hydrodynamic study, visual observations of the flow patterns were performed, as well as pressure drop measurements and residence time distribution analysis in single liquid phase flow and two-phase flows. In every configuration tested, two main regimes were identified: the “isolated bubbles” regime and the “stratified” regime. Peclet number and liquid hold-up were deduced from the residence time distribution analysis. The measured liquid hold-ups are always higher than 0.6, which indicates, in addition to the visual observations and colorimetric tests, that the catalyst is always fully wetted by the liquid film. The axial dispersion measurements showed that the single liquid phase flow cannot be interpreted by a classical axial dispersion model. However, when a gas phase is added, the flow becomes closer to plug flow, with Peclet numbers always higher than 40. It

  8. Design of heterogeneous catalysts

    DEFF Research Database (Denmark)

    Frey, Anne Mette

    The title of my PhD thesis is “Design of Heterogeneous Catalysts”. Three reactions have been investigated: the methanation reaction, the Fischer-Tropsch reaction, and the NH3-based selective catalytic reduction (SCR) of NO. The experimental work performed in connection with the methanation reaction...... hydrogenation. For both systems a maximum in catalytic activity was found for some of the bimetallic catalysts being superior to the monometallic catalysts. This resulted in volcano curves for all investigated systems. In the Fischer-Tropsch reaction promotion of cobalt catalysts with manganese was studied...... well, and the best catalyst prepared had a C5+ yield almost a factor of two higher than a standard air calcined Co catalyst. In the NH3-SCR reaction it is desirable to develop an active and stable catalyst for NOx removal in automotive applications, since the traditionally used vanadium-based catalyst...

  9. A comparative study of standard versus laparoendoscopic single-site surgery (LESS) totally extraperitoneal (TEP) inguinal hernia repair.

    Science.gov (United States)

    Tai, Huai-Ching; Lin, Chia-Da; Chung, Shiu-Dong; Chueh, Shih-Chieh Jeff; Tsai, Yao-Chou; Yang, Stephen Shei-Dei

    2011-09-01

    Laparoscopic inguinal hernia repair has been around since the 1990s. A novel surgical approach known as laparoendoscopic single-site surgery (LESS) has been developed to reduce the port-related morbidities and improve the cosmetic outcomes of laparoscopic surgery, including totally extraperitoneal (TEP) inguinal hernia repair. The aim of the present study was to evaluate the safety and feasibility of the LESS TEP technique for inguinal hernia repair and compare the outcomes with the standard TEP approach. Between January and May 2009, 54 consecutive healthy patients (48 men and 6 women) underwent LESS TEP inguinal hernia repair at our institute. All procedures were performed using our homemade single port for simultaneous passage of the laparoscope and instruments. The perioperative data, including patient age, sex, body mass index (BMI), hernia characteristics, operative time, complications, length of hospital stay, return to normal activity, pain score, and cosmetic result, were prospectively collected. All LESS TEP procedures were completed successfully without conversion to standard laparoscopic or open surgery. A total of 98 LESS TEP hernia repairs were performed in 54 patients and compared with 152 standard TEP operations. The mean operative time was significantly shorter in the standard TEP series (61.8 ± 26.0 vs. 70.9 ± 23.8 min, p = 0.04). Other perioperative parameters, including the length of hospital stay, time until return to full activity, complication rate, pain score, and cosmetic result, were all comparable between the two techniques. Our short-term experience with LESS TEP inguinal hernia repair has shown that in experienced hands, inguinal hernia repair via the LESS TEP technique is as safe as the standard TEP technique. However, based on our evidence, we currently believe that the LESS TEP technique is not an efficacious surgical alternative to the standard TEP technique for inguinal hernias.

  10. Weyl Semimetals as Hydrogen Evolution Catalysts.

    Science.gov (United States)

    Rajamathi, Catherine R; Gupta, Uttam; Kumar, Nitesh; Yang, Hao; Sun, Yan; Süß, Vicky; Shekhar, Chandra; Schmidt, Marcus; Blumtritt, Horst; Werner, Peter; Yan, Binghai; Parkin, Stuart; Felser, Claudia; Rao, C N R

    2017-05-01

    The search for highly efficient and low-cost catalysts is one of the main driving forces in catalytic chemistry. Current strategies for the catalyst design focus on increasing the number and activity of local catalytic sites, such as the edge sites of molybdenum disulfides in the hydrogen evolution reaction (HER). Here, the study proposes and demonstrates a different principle that goes beyond local site optimization by utilizing topological electronic states to spur catalytic activity. For HER, excellent catalysts have been found among the transition-metal monopnictides-NbP, TaP, NbAs, and TaAs-which are recently discovered to be topological Weyl semimetals. Here the study shows that the combination of robust topological surface states and large room temperature carrier mobility, both of which originate from bulk Dirac bands of the Weyl semimetal, is a recipe for high activity HER catalysts. This approach has the potential to go beyond graphene based composite photocatalysts where graphene simply provides a high mobility medium without any active catalytic sites that have been found in these topological materials. Thus, the work provides a guiding principle for the discovery of novel catalysts from the emerging field of topological materials. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. The role of benzodiazepines in breathlessness: a single site, open label pilot of sustained release morphine together with clonazepam.

    Science.gov (United States)

    Allcroft, Peter; Margitanovic, Vera; Greene, Aine; Agar, Meera R; Clark, Katherine; Abernethy, Amy P; Currow, David C

    2013-07-01

    Breathlessness at rest or on minimal exertion despite optimal treatment of underlying cause(s) is distressing and prevalent. Opioids can reduce the intensity of chronic refractory breathlessness and an anxiolytic may be of benefit. This pilot aimed to determine the safety and feasibility of conducting a phase III study on the intensity of breathlessness by adding regular benzodiazepine to low-dose opioid. This is a single site, open label phase II study of the addition of regular clonazepam 0.5 mg nocte orally to Kapanol(R) 10 mg (sustained release morphine sulphate) orally mane together with docusate/sennosides in people with modified Medical Research Council Scale ≥2. Breathlessness intensity on day four was the efficacy outcome. Participants could extend for another 10 days if they achieved >15% reduction over their own baseline breathlessness intensity. Eleven people had trial medication (eight males, median age 78 years (68 to 89); all had COPD; median Karnofsky 70 (50 to 80); six were on long-term home oxygen. Ten people completed day four. One person withdrew because of unsteadiness on day four. Five participants reached the 15% reduction, but only three went on to the extension study, all completing without toxicity. This study was safe, feasible and there appears to be a group who derive benefits comparable to titrated opioids. Given the widespread use of benzodiazepines for the symptomatic treatment of chronic refractory breathlessness and its poor evidence base, there is justification for a definitive phase III study.

  12. The effectiveness of laparoendoscopic single-site surgery (LESS) compared with conventional laparoscopic surgery for ectopic pregnancy with hemoperitoneum.

    Science.gov (United States)

    Yang, Juseok; Na, Yong Jin; Song, Yong Jung; Choi, Ook Hwan; Lee, Sun Kyung; Kim, Hwi Gon

    2016-02-01

    The purpose of this study was to compare clinical outcomes of conventional laparoscopic surgery and laparoendoscopic single-site surgery (LESS) in the surgical treatment of tubal ectopic pregnancy. A total of 156 patients were diagnosed with ectopic pregnancies by ultrasonography and serum β-human chorionic gonadotrophin (β-hCG) levels at Pusan National University Yangsan Hospital from January 2009 through December 2013. We excluded 28 patients who only received medical treatment, 15 patients who underwent surgery by laparotomy for severe hypovolemic shock, and 30 patients who presented with less than 1 L of hemoperitoneum. Of the 83 patients with massive hemoperitoneum, 38 patients had LESS performed while the remaining 45 patients underwent conventional laparoscopic surgery. In this study, there were no statistically significant differences in clinical outcomes in either surgical method except for operative time. Operative time of LESS was significantly shorter than conventional surgery for patients with more than 500 mL of hemoperitoneum. LESS is a safe and feasible surgical approach in the treatment of tubal ectopic pregnancy. At the same time, LESS has been shown to be more effective than conventional laparoscopic surgery in handling massive hemoperitoneum of more than 1 L, which is a common complication of ectopic pregnancy. Copyright © 2016. Published by Elsevier B.V.

  13. Comparative study of multiport laparoscopy and umbilical laparoendoscopic single-site surgery with reusable platform for treating renal masses.

    Science.gov (United States)

    Chantada, C; García-Tello, A; Esquinas, C; Moraga, A; Redondo, C; Angulo, J C

    Umbilical laparoendoscopic single-site (LESS) surgery is an increasingly used modality for treating renal masses. We present a prospective comparison between LESS renal surgery and conventional laparoscopy. A comparative paired study was conducted that evaluated the surgical results and complications of patients with renal neoplasia treated with LESS surgery (n=49) or multiport laparoscopy (n=53). The LESS approach was performed with reusable material placed in the navel and double-rotation curved instruments. An additional 3.5-mm port was employed in 69.4% of the cases. We assessed demographic data, the type of technique (nephrectomy, partial nephrectomy and nephroureterectomy), surgical time, blood loss, haemoglobin, need for transfusion, number and severity of complications (Clavien-Dindo), hospital stay, histological data and prognosis. There were no differences in follow-up, age, sex, body mass index, preoperative haemoglobin levels or type of surgery. Conversion occurred in 2 cases (1 in each group). The surgical time was equivalent (P=.6). Intraoperative transfusion (P=.03) and blood loss (Plaparoscopy (P=.0013). Umbilical LESS surgery with reusable platform enables various surgical techniques to be performed when treating renal masses, with time consumption and safety comparable to conventional laparoscopy. The LESS approach is advantageous in terms of blood loss and hospital stay. Copyright © 2016 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  14. Laparoendoscopic Single-site Surgery (LESS) for Prophylactic Salpingo-oophorectomy Improves Cosmetic Satisfaction Compared to Standard Laparoscopy.

    Science.gov (United States)

    Miailhe, Gregoire; Dauchy, Sarah; Bentivegna, Enrica; Gouy, Sebastien; Charles, Cecile; Delaloge, Suzette; Morice, Philippe; Uzan, Catherine

    2015-11-01

    Less invasive prophylactic bilateral salpingo-oophorectomy (PBSO) may diminish the general consequences of surgery for BRCA mutation carriers. The objective of the present study was to compare the psychological impact and satisfaction following minimal-invasive laparoendoscopic single-site surgery (LESS) versus that observed with the standard procedure. This prospective longitudinal study was proposed to all consecutive patients who underwent ambulatory PBSO between January 2012 and January 2014 at our Center. The psychological impact and esthetic satisfaction were prospectively studied. Patients rated their satisfaction using the 4-grade Likert scale. Their emotional state and postoperative pain were explored respectively with validated questionnaires (IES-R, PANAS) and the Verbal Numerical Rating Scale (VNRS). Operative outcomes were also analyzed. Twenty patients underwent LESS PBSO and 10 patients had the standard laparoscopic (SL) PBSO. The mean satisfaction scores were significantly higher in the LESS group one month and six months after surgery. Both groups reported a reduction of intrusive thoughts and negative affects after surgery. Postoperative pain and operative outcomes were similar. A significant improvement of cosmetic satisfaction after LESS compared to SL could help patients accept PBSO. The emotional impact of PBSO is not modified by ambulatory LESS. Copyright© 2015 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  15. Torsion of a Subserosal Myoma Managed by Gasless Laparoendoscopic Single-Site Myomectomy with In-Bag Manual Extraction

    Directory of Open Access Journals (Sweden)

    Akihiro Takeda

    2016-01-01

    Full Text Available Acute torsion of a subserosal myoma is a rare surgical emergency that is infrequently diagnosed preoperatively. Furthermore, laparoendoscopic single-site (LESS myomectomy with in-bag tissue extraction for the management of this disorder has not yet been described. A 43-year-old, gravida 1, para 1 woman was referred to our department due to a solid pelvic mass associated with persistent abdominal pain. A pedunculated subserosal myoma with torsion was strongly suspected based on ultrasonography and magnetic resonance imaging. Emergency LESS surgery showed that the subserosal myoma arising from the posterior uterine wall torted at its pedicle in the cul-de-sac. The twisted myoma node was excised by coagulation and cut using a LigaSure Atlas, followed by in-bag manual morcellation and extraction through an umbilical wound. The present case report emphasizes that LESS myomectomy with in-bag tissue extraction is a feasible minimally invasive surgical option for the management of subserosal myoma with torsion after a precise imaging-based diagnostic evaluation.

  16. Seasonal variation of heavy metals in ambient air and precipitation at a single site in Washington, DC

    International Nuclear Information System (INIS)

    Melaku, Samuel; Morris, Vernon; Raghavan, Dharmaraj; Hosten, Charles

    2008-01-01

    Atmospheric samples of precipitation and ambient air were collected at a single site in Washington, DC, for 7 months (for ambient air samples) and 1 year (for wet deposition samples) and analyzed for arsenic, cadmium, chromium and lead. The ranges of heavy metal concentrations for 6-day wet deposition samples collected over the 1-year period were 0.20-1.3 μg/l, 0.060-5.1 μg/l, 0.062-4.6 μg/l and 0.11-3.2 μg/l for arsenic, cadmium, chromium and lead, respectively, with a precision better than 5% for more than 95% of the measurements. The ranges of heavy metal concentrations for the 6-day ambient air samples were 0.800-15.7 ng/m 3 , 1.50-30.0 ng/m 3 , 16.8-112 ng/m 3 , and 2.90-137 ng/m 3 for arsenic, cadmium, chromium and lead, respectively, with a precision better than 10%. The spread in the heavy metal concentration over the observation period suggests a high seasonal variability for heavy metal content in both ambient air and wet deposition samples. - High seasonal variability of heavy metals were observed in both ambient air and wet deposition samples

  17. Used solid catalysts from chemical and petrochemical industries; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    A comprehensive survey of the solid catalysts used in the chemical and petrochemical industries is presented; information on solid catalyst market demand prospective for 1998, the nature of solid catalysts used in the various industrial sectors and for the various chemical products production, the european catalysts manufacturers, solid catalyst poisons and inhibitors according to the various types of chemical reactions, mean compositions of used solid catalysts, an assessment of the volume of used solid catalysts generated by chemical and petrochemical industries, the various ways of solid catalyst regeneration and disposal, the potential for off-site regeneration of used catalysts, and French and European regulations, is presented

  18. Germanium nanowires grown using different catalyst metals

    Energy Technology Data Exchange (ETDEWEB)

    Gouveia, R.C., E-mail: riama@ifsp.edu.br [Departamento de Física – NanO Lab, Universidade Federal de São Carlos, Rod. Washington Luís, Km 235 – SP 310, São Carlos, CEP 13565-905 (Brazil); Área de Ciências, Instituto Federal de Educação Ciência e Tecnologia de São Paulo, Rua Américo Ambrósio, 269, Jd. Canaã, Sertãozinho, CEP 14169-263 (Brazil); Kamimura, H.; Munhoz, R.; Rodrigues, A.D. [Departamento de Física – NanO Lab, Universidade Federal de São Carlos, Rod. Washington Luís, Km 235 – SP 310, São Carlos, CEP 13565-905 (Brazil); Leite, E.R. [Departamento de Química – LIEC, Universidade Federal de São Carlos, São Carlos, CEP 13565-905 (Brazil); Chiquito, A.J. [Departamento de Física – NanO Lab, Universidade Federal de São Carlos, Rod. Washington Luís, Km 235 – SP 310, São Carlos, CEP 13565-905 (Brazil)

    2016-11-01

    Germanium nanowires have been synthesized by the well known vapor-liquid-solid growth mechanism using gold, silver, cooper, indium and nickel as catalyst metals. The influence of metal seeds on nanowires structural and electronic transport properties was also investigated. Electron microscopy images demonstrated that, despite differences in diameters, all nanowires obtained presented single crystalline structures. X-ray patterns showed that all nanowires were composed by germanium with a small amount of germanium oxide, and the catalyst metal was restricted at the nanowires' tips. Raman spectroscopy evidenced the long range order in the crystalline structure of each sample. Electrical measurements indicated that variable range hopping was the dominant mechanism in carrier transport for all devices, with similar hopping distance, regardless the material used as catalyst. Then, in spite of the differences in synthesis temperatures and nanowires diameters, the catalyst metals have not affected the composition and crystalline quality of the germanium nanowires nor the carrier transport in the germanium nanowire network devices. - Highlights: • Ge nanowires were grown by VLS method using Au, Ag, Cu, In and Ni as catalysts. • All nanowires presented high single crystalline quality and long range order. • Devices showed semiconducting behavior having VRH as dominant transport mechanism. • The metal catalyst did not influence structural properties or the transport mechanism.

  19. A comparison of single- and multi-site calibration and validation: a case study of SWAT in the Miyun Reservoir watershed, China

    Science.gov (United States)

    Bai, Jianwen; Shen, Zhenyao; Yan, Tiezhu

    2017-09-01

    An essential task in evaluating global water resource and pollution problems is to obtain the optimum set of parameters in hydrological models through calibration and validation. For a large-scale watershed, single-site calibration and validation may ignore spatial heterogeneity and may not meet the needs of the entire watershed. The goal of this study is to apply a multi-site calibration and validation of the Soil andWater Assessment Tool (SWAT), using the observed flow data at three monitoring sites within the Baihe watershed of the Miyun Reservoir watershed, China. Our results indicate that the multi-site calibration parameter values are more reasonable than those obtained from single-site calibrations. These results are mainly due to significant differences in the topographic factors over the large-scale area, human activities and climate variability. The multi-site method involves the division of the large watershed into smaller watersheds, and applying the calibrated parameters of the multi-site calibration to the entire watershed. It was anticipated that this case study could provide experience of multi-site calibration in a large-scale basin, and provide a good foundation for the simulation of other pollutants in followup work in the Miyun Reservoir watershed and other similar large areas.

  20. Testing single-grain quartz OSL methods using sediment samples with independent age control from the Bordes-Fitte rockshelter (Roches d'Abilly site, Central France)

    DEFF Research Database (Denmark)

    Thomsen, Kristina Jørkov; Murray, Andrew Sean; Buylaert, Jan-Pieter

    2016-01-01

    We present quartz single-grain dose distributions for four well-bleached and unmixed sediment samples with independent age control (22–48 ka), from the archaeologically important Bordes-Fitte rockshelter at Roches d'Abilly, France. This site has previously been dated using 14C AMS dating and stan......We present quartz single-grain dose distributions for four well-bleached and unmixed sediment samples with independent age control (22–48 ka), from the archaeologically important Bordes-Fitte rockshelter at Roches d'Abilly, France. This site has previously been dated using 14C AMS dating...

  1. Catalysis Science Initiative: Catalyst Design by Discovery Informatics

    Energy Technology Data Exchange (ETDEWEB)

    Delgass, William Nicholas [Purdue Univ., West Lafayette, IN (United States). Chemical Engineering; Abu-Omar, Mahdi [Purdue Univ., West Lafayette, IN (United States) Department of Chemistry; Caruthers, James [Purdue Univ., West Lafayette, IN (United States). Chemical Engineering; Ribeiro, Fabio [Purdue Univ., West Lafayette, IN (United States). Chemical Engineering; Thomson, Kendall [Purdue Univ., West Lafayette, IN (United States). Chemical Engineering; Schneider, William [Univ. of Notre Dame, IN (United States)

    2016-07-08

    atoms in the interfacial region. Some of the first theoretical descriptions of this important chemistry and potential new source of control of catalyst properties are be in preparation for submission. On the homogeneous catalysis side, we have used single site olefin polymerization as the testbed. This system is important because changes in a single ligand bonded to the catalytically active metal site can alter the rates of individual steps in the polymerization sequence and thereby change the properties of the resulting polymer, potentially improving its value in a hundred million pound per year industry. We have made a major advance in understanding such systems by developing a population balance kinetic model that allows us to predict the molecular weight distribution (MWD) of the product. That, in turn, allows use of MWD data to fit kinetic parameters. By combining monomer loss data, MWD, measurement of the number of working active sites, and polymer end group analysis, we have a rich data set that is highly discriminating of kinetic mechanism. Thus, we have a robust tool for producing high quality, detailed kinetic parameters, which we have used to refine mechanisms presented in the literature and discover relationships between steric and electronic properties of group IV catalysts and individual rate constants in a number of systems. Our recent work on six-coordinate Zr, Ti, and Hf amine bis(phenolate) systems, we have shown that: • The sterics (bulkiness) of the ligands specifically affect the chain termination reaction • The electron density on the metal controls misinsertion (flipped orientation) of the olefin into the growing polymer • Steric effects related to the size of the ortho ligand on the catalyst have been shown to strongly affect its the degree of dormancy, i.e. tendency to stop reacting • Changes in the size of the amine pendent group on the catalyst can have such a strong effect on chain termination as to change the catalyst from one that

  2. Methods of making textured catalysts

    Science.gov (United States)

    Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

    2010-08-17

    A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.

  3. What Factors Coordinate the Optimal Position of a Single Monitoring Well Down Gradient of a Hazardous Site?

    Science.gov (United States)

    Bode, F.; Nowak, W.

    2013-12-01

    Drinking-water well catchments include many sources for potential contaminations like gas stations, roads, or fields used for agriculture. Additionally, there are many contaminated sites that need to be monitored inside and outside drinking water catchments. Finding optimal positions of monitoring wells for such purposes is challenging because there are various parameters (and their uncertainties) that influence the reliability and optimality of a suggested monitoring location. For example, there may be uncertainty in the exact position of the contamination, in the source volume, in the direction of the velocity field which can vary in angle and absolute value, and in other parameters that describe, e.g., dispersion and decay. Many national regulations and UN guidelines suggest monitoring as measure of risk control, but make no statements how to asses or design monitoring under the fact of uncertainty. To obtain optimal positions of monitoring wells, a large body of recent studies uses formal optimization approaches. Our goal is to obtain a better system understanding at a fundamental process level for the one-on-one situation of a single monitoring well for a single monitoring target. This knowledge can be used for a better understanding of the optimization results in complex situations, and also to better guide and restrict optimization procedures by newly obtained export knowledge. In order to obtain fundamental statements regardless of specific simulation settings, we use an analytical model based on the 2D steady-state advection-dispersion equation to predict contaminant transport from the monitoring target. Monte Carlo simulation techniques are applied to represent parametric uncertainty. Thus, we can obtain maps of contaminant detection probability for all possible placements of the monitoring well. The optimal position is defined by the highest detection probability. First findings show that uncertainty in the spill location pushes the optimal monitoring

  4. Metal-free phenanthrenequinone cyclotrimer as an effective heterogeneous catalyst.

    Science.gov (United States)

    Zhang, Jian; Wang, Xuan; Su, Qi; Zhi, Linjie; Thomas, Arne; Feng, Xinliang; Su, Dang Sheng; Schlögl, Robert; Müllen, Klaus

    2009-08-19

    A phenanthrenequinone macrocyclic trimer was synthesized and used as a heterogeneous catalyst for oxidative dehydrogenation of ethylbenzene. This model molecule under comparable kinetic conditions is up to 47 times more active than extended solid catalysts including nanocarbons, metal phosphates, and oxides, confirming the hypothesis that diketone-like groups can serve as active sites.

  5. Catalyst Alloys Processing

    Science.gov (United States)

    Tan, Xincai

    2014-10-01

    Catalysts are one of the key materials used for diamond formation at high pressures. Several such catalyst products have been developed and applied in China and around the world. The catalyst alloy most widely used in China is Ni70Mn25Co5 developed at Changsha Research Institute of Mining and Metallurgy. In this article, detailed techniques for manufacturing such a typical catalyst alloy will be reviewed. The characteristics of the alloy will be described. Detailed processing of the alloy will be presented, including remelting and casting, hot rolling, annealing, surface treatment, cold rolling, blanking, finishing, packaging, and waste treatment. An example use of the catalyst alloy will also be given. Industrial experience shows that for the catalyst alloy products, a vacuum induction remelt furnace can be used for remelting, a metal mold can be used for casting, hot and cold rolling can be used for forming, and acid pickling can be used for metal surface cleaning.

  6. Cellulose Depolymerization over Heterogeneous Catalysts.

    Science.gov (United States)

    Shrotri, Abhijit; Kobayashi, Hirokazu; Fukuoka, Atsushi

    2018-02-14

    sugar yield of 90% was achieved in a 20 min reaction. We clarified that the polycyclic aromatic surface of the carbon adsorbs cellulose molecules on its surface by CH-π and hydrophobic interactions driven by a positive change in entropy of the system. The adsorbed molecules are rapidly hydrolyzed by active sites containing vicinal functional groups that recognize the hydroxyl groups on cellulose to achieve a high frequency factor. This phenomenon is analogous to the hydrolysis of cellulose by enzymes that use CH-π and hydrophobic interactions along with weakly acidic carboxylic acid and carboxylate pair to catalyze the reaction. However, in comparison with enzymes, carbon catalyst is functional over a wide range of pH and temperatures. We also developed a continuous flow slurry process to demonstrate the feasibility for commercial application of carbon-catalyzed cellulose hydrolysis to glucose using inexpensive catalyst prepared by air oxidation. We believe that further efforts in this field should be directed toward eliminating roadblocks for the commercialization of cellulose conversion reactions.

  7. Alloy catalyst material

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a novel alloy catalyst material for use in the synthesis of hydrogen peroxide from oxygen and hydrogen, or from oxygen and water. The present invention also relates to a cathode and an electrochemical cell comprising the novel catalyst material, and the process use...... of the novel catalyst material for synthesising hydrogen peroxide from oxygen and hydrogen, or from oxygen and water....

  8. Laparoendoscopic single-site (LESS retroperitoneal partial adrenalectomy using a custom-made single-access platform and standard laparoscopic instruments: Technical considerations and surgical outcomes

    Directory of Open Access Journals (Sweden)

    Chen-Hsun Ho

    2015-01-01

    Conclusion: Our results clearly demonstrate that LESS retroperitoneal partial adrenalectomy can be performed safely and effectively using a custom-made single-access platform and standard laparoscopic instruments.

  9. Very late complications of cervical arthroplasty: results of 2 controlled randomized prospective studies from a single investigator site.

    Science.gov (United States)

    Hacker, Francis M; Babcock, Rebecca M; Hacker, Robert J

    2013-12-15

    Prospective, single-site, randomized, Food and Drug Administration-approved investigational device exemption clinical trials of 2 cervical arthroplasty (CA) devices. To evaluate complications with CA occurring more than 4 years after the surgical procedure in Food and Drug Administration clinical trials of the Bryan and Prestige LP arthroplasty devices. Reports of several randomized clinical studies have shown CA to be a safe and effective alternative to anterior cervical fusion in the treatment of degenerative cervical disc disorders. A majority include follow-up intervals of 4 years or less. Between 2002 and 2006, 94 patients were enrolled in Food and Drug Administration studies of the Bryan and Prestige LP cervical disc devices. Charts, imaging studies, and hospital records were reviewed for those who underwent arthroplasty and returned more than 4 years after their surgical procedure with neck-related pain or dysfunction. Excluding adjacent segment disease that occurred with a similar rate for patients who underwent fusion and arthroplasty, 5 patients, all treated with arthroplasty, returned for evaluation of neck and arm symptoms between 48 and 72 months after surgery. Four patients had peridevice vertebral body bone loss. One patient had posterior device migration and presented with myelopathy. Three required revision surgery and 2 were observed. Four patients maintained follow-up and reported stabilization or improvement in symptoms. Despite their similarities, CA and fusion are not equivalent procedures in this study in regard to very late complications. Similar to large joint arthroplasty, delayed device-related complications may occur with CA. These complications commenced well beyond the time frame for complications associated with more traditional cervical spine procedures. Both patients and surgeons should be aware of the potential for very late device-related complications occurring with CA and the need for revision surgery. 1.

  10. Laparoendoscopic single-site surgery for the treatment of different urological pathologies: Defining the learning curve of an experienced laparoscopist.

    Science.gov (United States)

    Abdel-Karim, Aly M; Elhenawy, Ibrahim M; Eid, Ahmed A; Yahia, Elsayed; Elsalmy, Salah A

    2017-09-01

    To define the learning curve of laparoendoscopic single-site surgery (LESS) of an experienced laparoscopist. Patients who had LESS, since its implementation in December 2009 until December 2014, were retrospectively analysed. Procedures were divided into groups of 10 and scored according to the European Scoring System for Laparoscopic Operations in Urology. Different LESS indications were done by one experienced laparoscopist. Technical feasibility, surgical safety, outcome, as well as the number of patients required to achieve professional competence were assessed. In all, 179 patients were included, with mean (SD) age of 36.3 (17.5) years and 25.4% of the patients had had previous surgeries. Upper urinary tract procedures were done in 65.9% of patients and 54.7% of the procedures were extirpative. Both transperitoneal and retroperitoneal LESS were performed in 92.8% and 7.2% of the patients, respectively. The intraoperative and postoperative complication rates were 2.2% and 5.6% (Clavien-Dindo Grade II 3.9% and IIIa 1.7%), respectively. In all, 75% of intraoperative complications and all conversions were reported during the first 30 LESS procedures; despite the significantly higher difficulty score in the subsequent LESS procedures. One 5-mm extra port, conversion to conventional laparoscopy and open surgery was reported in 14%, 1.7%, and 1.1% of the cases, respectively. At mean (SD) follow-up of 39.7 (11.4) months, all the patients that underwent reconstructive LESS procedures but one were successful. In experienced hands, at least 30 LESS procedures are required to achieve professional competence. Although difficult, both conversion and complication rates of LESS are low in experienced hands.

  11. Synthesis and characterization of solid heterogeneous catalyst for ...

    African Journals Online (AJOL)

    Synthesis and characterization of solid heterogeneous catalyst for the production of biodiesel from high FFA waste cooking oil. Nasar Mansir, Taufiq-Yap Yun Hin. Abstract. No Abstract. Keywords: Biodiesel, Transesterification, High FFA waste cooking oil, Heterogeneous catalyst, Single step reaction process. Full Text:.

  12. DFT + U investigation on the adsorption and initial decomposition of methylamine by a Pt single-atom catalyst supported on rutile (110) TiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Cun-Qin [College of Chemistry and Environmental Engineering, Shanxi Datong University, Datong 037009, Shanxi Province (China); Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin 300071 (China); Liu, Jian-Hong, E-mail: ljh173@126.com [College of Chemistry and Environmental Engineering, Shanxi Datong University, Datong 037009, Shanxi Province (China); Guo, Yong; Li, Xue-Mei [College of Chemistry and Environmental Engineering, Shanxi Datong University, Datong 037009, Shanxi Province (China); Wang, Gui-Chang, E-mail: wangguichang@nankai.edu.cn [Department of Chemistry, Tianjin Key Lab. of Metal and Molecule-Based Material Chemistry, Nankai University, Tianjin 300071 (China)

    2016-12-15

    Highlights: • DFT + U is used to investigate the initial decomposition of methylamine. • The adsorption characteristics of possible intermediates involved in methylamine initial decomposition are discussed. • The energy barriers of the possible elementary reactions involved are obtained. • C−H bond scission is the most favored among the C−H, N−H and C−N bond breakings in methylamine. - Abstract: The adsorption and initial decomposition for methylamine catalyzed by a single Pt atom supported on rutile (110) titania (namely, Pt{sub 1}/TiO{sub 2}–R(110)) surface have been investigated by the density functional theory slab calculations with Hubbard corrections (DFT + U). The main purpose of the work is to better understand the role of dispersed platinum metal on the surface of rutile (110) titania in the initial decomposition of methylamine. Our calculated results show that the barriers increased with the order of C−H < N−H < C−N, which indicates that the C−H bond is the easiest to decompose and the C−N bond is the most difficult to break.

  13. Fischer-Tropsch, hydrotreating and superClaus catalysts

    International Nuclear Information System (INIS)

    Kraan, A.M. van der

    1998-01-01

    In modern society the application of catalysts, and hence, research in the field of catalysis, is becoming more and more important. In the strongly increasing chemical industry most reaction processes are performed with the aid of catalysts. Knowledge about the structure of the active sites present at the surface of catalysts will facilitate the design of new catalysts with better performances. Such knowledge can be obtained by Moessbauer spectroscopy, which is an excellent in-situ characterization technique due to the high penetrating power of the γ-radiation used and the sensitivity of the spectral parameters for the chemical state and local environment of the Moessbauer atoms

  14. METHOD OF PURIFYING CATALYSTS

    Science.gov (United States)

    Joris, G.G.

    1958-09-01

    It has been fuund that the presence of chlorine as an impurity adversely affects the performance of finely divided platinum catalysts such as are used in the isotopic exchange process for the production of beavy water. This chlorine impurity may be removed from these catalysts by treating the catalyst at an elevated temperature with dry hydrogen and then with wet hydrogen, having a hydrogen-water vapor volume of about 8: 1. This alternate treatment by dry hydrogen and wet hydrogen is continued until the chlorine is largely removed from the catalyst.

  15. Robot-assisted single-site compared with laparoscopic single-incision cholecystectomy for benign gallbladder disease: protocol for a randomized controlled trial.

    Science.gov (United States)

    Grochola, Lukasz Filip; Soll, Christopher; Zehnder, Adrian; Wyss, Roland; Herzog, Pascal; Breitenstein, Stefan

    2017-02-09

    Recent advances in robotic technology suggest that the utilization of the da Vinci Single-Site™ platform for cholecystectomy is safe, feasible and results in a shorter learning curve compared to conventional single-incision laparoscopic cholecystectomy. Moreover, the robot-assisted technology has been shown to reduce the surgeon's stress load compared to standard single-incision laparoscopy in an experimental setup, suggesting an important advantage of the da Vinci platform. However, the above-mentioned observations are based solely on case series, case reports and experimental data, as high-quality clinical trials to demonstrate the benefits of the da Vinci Single-Site™ cholecystectomy have not been performed to date. This study addresses the question whether robot-assisted Single-Site™ cholecystectomy provides significant benefits over single-incision laparoscopic cholecystectomy in terms of surgeon's stress load, while matching the standards of the conventional single-incision approach with regard to peri- and postoperative outcomes. It is designed as a single centre, single-blinded randomized controlled trial, which compares both surgical approaches with the primary endpoint surgeon's physical and mental stress load at the time of surgery. In addition, the study aims to assess secondary endpoints such as operating time, conversion rates, additional trocar placement, intra-operative blood loss, length of hospital stay, costs of procedure, health-related quality of life, cosmesis and complications. Patients as well as ward staff are blinded until the 1 st postoperative year. Sample size calculation based on the results of a previously published experimental setup utilizing an estimated effect size of surgeon's comfort of 0.8 (power of 0.8, alpha-error level of 0.05, error margin of 10-15%) resulted in a number of 30 randomized patients per arm. The study is the first randomized controlled trial that compares the da Vinci Single Site™ platform to

  16. Catalyst design for clean and efficient fuels

    DEFF Research Database (Denmark)

    Šaric, Manuel

    of synthesizing dimethyl carbonate electrochemically. Hydrodesulfurization is an industrial refining process in which sulfur is removed from oil in order to reduce SO2 emissions. The study on hydrodesulfurization involves determining the active sites and their atomic scale structure for the industrially used...... cobalt promoted MoS2 catalyst. Reactivity of a series of model molecules, found in oil prior to desulfurization, is studied on cobalt promoted MoS2. Such an approach has the potential to explain the underlying processes involved in the removal of sulfur at each specific site of the catalyst. The goal...... processes currently used. It is found that noble metals can be used as electrocatalysts for the synthesis of dimethyl carbonate, significantly lowering the potential when using copper instead of gold. Besides being active, copper was found to be selective towards dimethyl carbonate. A non-selective catalyst...

  17. Pyrochlore catalysts for hydrocarbon fuel reforming

    Science.gov (United States)

    Berry, David A.; Shekhawat, Dushyant; Haynes, Daniel; Smith, Mark; Spivey, James J.

    2012-08-14

    A method of catalytically reforming a reactant gas mixture using a pyrochlore catalyst material comprised of one or more pyrochlores having the composition A2B2-y-zB'yB"zO7-.DELTA., where y>0 and z.gtoreq.0. Distribution of catalytically active metals throughout the structure at the B site creates an active and well dispersed metal locked into place in the crystal structure. This greatly reduces the metal sintering that typically occurs on supported catalysts used in reforming reactions, and reduces deactivation by sulfur and carbon. Further, oxygen mobility may also be enhanced by elemental exchange of promoters at sites in the pyrochlore. The pyrochlore catalyst material may be utilized in catalytic reforming reactions for the conversion of hydrocarbon fuels into synthesis gas (H2+CO) for fuel cells, among other uses.

  18. Fe–Al/clay as an efficient heterogeneous catalyst for solvent-free ...

    Indian Academy of Sciences (India)

    and existence of acid sites.32 Almost all the catalysts proved good and were unexpectedly found to have bet- ter catalytic activity than their parent metal halides. Fe–Al/clay was found to be most active and showed better catalytic activity than some reported catalysts. (table 1). This catalyst was prepared in bulk and cal-.

  19. Hydroxide catalysts for lignin depolymerization

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg T; Biddy, Mary J.; Kruger, Jacob S.; Chmely, Stephen C.; Sturgeon, Matthew

    2017-10-17

    Solid base catalysts and their use for the base-catalyzed depolymerization (BCD) of lignin to compounds such as aromatics are presented herein. Exemplary catalysts include layered double hydroxides (LDHs) as recyclable, heterogeneous catalysts for BCD of lignin.

  20. Hydroxide catalysts for lignin depolymerization

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg T.; Biddy, Mary J.; Chmely, Stephen C.; Sturgeon, Matthew

    2017-04-25

    Solid base catalysts and their use for the base-catalyzed depolymerization (BCD) of lignin to compounds such as aromatics are presented herein. Exemplary catalysts include layered double hydroxides (LDHs) as recyclable, heterogeneous catalysts for BCD of lignin.

  1. Peptide-templated noble metal catalysts: syntheses and applications.

    Science.gov (United States)

    Wang, Wei; Anderson, Caleb F; Wang, Zongyuan; Wu, Wei; Cui, Honggang; Liu, Chang-Jun

    2017-05-01

    Noble metal catalysts have been widely used in many applications because of their high activity and selectivity. However, a controllable preparation of noble metal catalysts still remains as a significant challenge. To overcome this challenge, peptide templates can play a critical role in the controllable syntheses of catalysts owing to their flexible binding with specific metallic surfaces and self-assembly characteristics. By employing peptide templates, the size, shape, facet, structure, and composition of obtained catalysts can all be specifically controlled under the mild synthesis conditions. In addition, catalysts with spherical, nanofiber, and nanofilm structures can all be produced by associating with the self-assembly characteristics of peptide templates. Furthermore, the peptide-templated noble metal catalysts also reveal significantly enhanced catalytic behaviours compared with conventional catalysts because the electron conductivity, metal dispersion, and reactive site exposure can all be improved. In this review, we summarize the research progresses in the syntheses of peptide-templated noble metal catalysts. The applications of the peptide-templated catalysts in organic reactions, photocatalysis, and electrocatalysis are discussed, and the relationship between structure and activity of these catalysts are addressed. Future opportunities, including new catalytic materials designed by using biological principles, are indicated to achieve selective, eco-friendly, and energy neutral synthesis approaches.

  2. Rhodium catalysts bound to functionalized mesoporous silica

    Energy Technology Data Exchange (ETDEWEB)

    Bitterwolf, Thomas E.; Newell, J D.; Carver, Colin T.; Addleman, Raymond S.; Linehan, John C.; Fryxell, Glen E.

    2004-07-20

    Phosphine and amine functionalized mesoporous silica materials were metallated with Rh(CO)2(i-Pr2NH)Cl or Rh2(CO)4Cl2, respectively, to yield catalysts containing the Rh(PPh2R)2(CO)Cl or Rh(CO)2(NH2R)Cl, where R is a propyl chain bonded to the silica surface, reactive centers. In order to ascertain the effect of pore size on rates of hydroformylation catalysis both 35 and 45 ? pore size materials were used. Using the hydroformylation of octene as a reference reaction, the phosphine based, 45 ? catalysts were 1.5-1.3 times faster than the amine based, 45 ? materials were 2.6-2.1 times faster than the 35 ? catalysts, and the 45 ? materials. The orientation of the catalyst relative to the functionalized surface, and the steric environment around the catalyst active site appear to be significant in determining rate of reaction. The ability of the surface bound phosphine catalysts to affect hydroformylation was strongly influenced by the steric constraints of the substrate. Terminal alkenes were readily hydroformylated and norbornene was slowly hydroformylated, but pinene, trans-cyclododecene, cyclohexene and cholesterol were nonreactive to the catalytic center.

  3. Activation of surface lattice oxygen in single-atom Pt/CeO 2 for low-temperature CO oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Nie, Lei; Mei, Donghai; Xiong, Haifeng; Peng, Bo; Ren, Zhibo; Pereira Hernandez, Xavier I.; DelaRiva, Andrew; Wang, Meng; Engelhard, Mark H.; Kovarik, Libor; Datye, Abhaya K.; Wang, Yong

    2017-12-14

    While single-atom catalysts can provide high catalytic activity and selectivity, application in industrial catalysts demands long term performance and the ability to regenerate the catalysts. We have investigated the factors that lead to improved catalytic activity of a Pt/CeO2 catalyst for low temperature CO oxidation. Single-atom Pt/CeO2 becomes active for CO oxidation under lean condition only at elevated temperatures, because CO is strongly bound to ionic Pt sites. Reducing the catalyst, even under mild conditions, leads to onset of CO oxidation activity even at room temperature. This high activity state involves the transformation of mononuclear Pt species to sub-nanometer sized Pt particles. Under oxidizing conditions, the Pt can be restored to its stable, single-atom state. The key to facile regeneration is the ability to create mobile Pt species and suitable trapping sites on the support, making this a prototypical catalyst system for industrial application of single-atom catalysis.

  4. Bifunctional catalysts for the direct production of liquid fuels from syngas

    NARCIS (Netherlands)

    Sartipi, S.

    2014-01-01

    Design and development of catalyst formulations that maximize the direct production of liquid fuels by combining Fischer-Tropsch synthesis (FTS), hydrocarbon cracking, and isomerization into one single catalyst particle (bifunctional FTS catalyst) have been investigated in this thesis. To achieve

  5. Hollow Nano- and Microstructures as Catalysts.

    Science.gov (United States)

    Prieto, Gonzalo; Tüysüz, Harun; Duyckaerts, Nicolas; Knossalla, Johannes; Wang, Guang-Hui; Schüth, Ferdi

    2016-11-23

    Catalysis is at the core of almost every established and emerging chemical process and also plays a central role in the quest for novel technologies for the sustainable production and conversion of energy. Particularly since the early 2000s, a great surge of interest exists in the design and application of micro- and nanometer-sized materials with hollow interiors as solid catalysts. This review provides an updated and critical survey of the ever-expanding material architectures and applications of hollow structures in all branches of catalysis, including bio-, electro-, and photocatalysis. First, the main synthesis strategies toward hollow materials are succinctly summarized, with emphasis on the (regioselective) incorporation of various types of catalytic functionalities within their different subunits. The principles underlying the scientific and technological interest in hollow materials as solid catalysts, or catalyst carriers, are then comprehensively reviewed. Aspects covered include the stabilization of catalysts by encapsulation, the introduction of molecular sieving or stimuli-responsive "auxiliary" functionalities, as well as the single-particle, spatial compartmentalization of various catalytic functions to create multifunctional (bio)catalysts. Examples are also given on the applications which hollow structures find in the emerging fields of electro- and photocatalysis, particularly in the context of the sustainable production of chemical energy carriers. Finally, a critical perspective is provided on the plausible evolution lines for this thriving scientific field, as well as the main practical challenges relevant to the reproducible and scalable synthesis and utilization of hollow micro- and nanostructures as solid catalysts.

  6. Fingerprinting the K/T impact site and determining the time of impact by U-Pb dating of single shocked zircons from distal ejecta

    Science.gov (United States)

    Krogh, T. E.; Kamo, S. L.; Bohor, B. F.

    1993-01-01

    U-Pb isotopic dating of single 1 - 3 micrograms zircons from K/T distal ejecta from a site in the Raton Basin, Colorado provides a powerful new tool with which to determine both the time of the impact event and the age of the basement at the impact site. Data for the least shocked zircons are slightly displaced from the 544 +/- 5 Ma primary age for a component of the target site, while those for highly shocked and granular grains are strongly displaced towards the time of impact at 65.5 +/- 3.0 Ma. Such shocked and granular zircons have never been reported from any source, including explosive volcanic rocks. Zircon is refractory and has one of the highest thermal blocking temperatures; hence, it can record both shock features and primary and secondary ages without modification by post-crystallization processes. Unlike shocked quartz, which can come from almost anywhere on the Earth's crust, shocked zircons can be shown to come from a specific site because basement ages vary on the scale of meters to kilometers. With U-Pb zircon dating, it is now possible to correlate ejecta layers derived from the same target site, test the single versus multiple impact hypothesis, and identify the target source of impact ejecta. The ages obtained in this study indicate that the Manson impact site, Iowa, which has basement rocks that are mid-Proterozoic in age, cannot be the source of K/T distal ejecta. The K/T distal ejecta probably originated from a single impact site because most grains have the same primary age.

  7. Magnetic catalyst bodies

    NARCIS (Netherlands)

    Teunissen, Wendy; Bol, A.A.; Geus, John W.

    1999-01-01

    After a discussion about the importance of the size of the catalyst bodies with reactions in the liquid-phase with a suspended catalyst, the possibilities of magnetic separation are dealt with. Deficiencies of the usual ferromagnetic particles are the reactivity and the clustering of the

  8. Catalyst for Ammonia Oxidation

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a bimetallic catalyst for ammonia oxidation, a method for producing a bimetallic catalyst for ammonia oxidation and a method for tuning the catalytic activity of a transition metal. By depositing an overlayer of less catalytic active metal onto a more catalytic...

  9. Nanostructured catalyst supports

    Science.gov (United States)

    Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

    2012-10-02

    The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

  10. Catalyst for hydrocarbon conversion

    International Nuclear Information System (INIS)

    Duhaut, P.; Miquel, J.

    1975-01-01

    A description is given for a catalyst and process for hydrocarbon conversions, e.g., reforming. The catalyst contains an alumina carrier, platinum, iridium, at least one metal selected from uranium, vanadium, and gallium, and optionally halogen in the form of metal halide of one of the aforesaid components. (U.S.)

  11. Synthesis, Characterizations, and Applications of Metal-Ions Incorporated High Quality MCM-41 Catalysts

    International Nuclear Information System (INIS)

    Lim, Steven S.; Haller, Gary L.

    2013-01-01

    Various metal ions (transition and base metals) incorporated MCM-41 catalysts can be synthesized using colloidal and soluble silica with non-sodium involved process. Transition metal ion-typically V 5+ , Co 2+ , and Ni 2+ -incorporated MCM-41 catalysts were synthesized by isomorphous substitution of Si ions in the framework. Each incorporated metal ion created a single species in the silica framework, single-site solid catalyst, showing a substantial stability in reduction and catalytic activity. Radius of pore curvature effect was investigated with Co-MCM-41 by temperature programmed reduction (TPR). The size of metallic Co clusters, sub-nanometer, could be controlled by a proper reduction treatment of Co-MCM-41 having different pore size and the initial pH adjustment of the Co-MCM-41 synthesis solution. These small metallic clusters showed a high stability under a harsh reaction condition without serious migration, resulting from a direct anchoring of small metallic clusters to the partially or unreduced metal ions on the surface. After a complete reduction, partial occlusion of the metallic cluster surface by amorphous silica stabilized the particles against aggregations. As a probe reaction of particle size sensitivity, carbon single wall nanotubes (SWNT) were synthesized using Co-MCM-41. A metallic cluster stability test was performed by CO methanation using Co- and Ni-MCM-41. Methanol and methane partial oxidations were carried out with V-MCM-41, and the radius of pore curvature effect on the catalytic activity was investigated

  12. Catalysis science of supported vanadium oxide catalysts.

    Science.gov (United States)

    Wachs, Israel E

    2013-09-07

    Supported vanadium oxide catalysts contain a vanadium oxide phase deposited on a high surface area oxide support (e.g., Al2O3, SiO2, TiO2, etc.) and have found extensive applications as oxidation catalysts in the chemical, petroleum and environmental industries. This review of supported vanadium oxide catalysts focuses on the fundamental aspects of this novel class of catalytic materials (molecular structures, electronic structures, surface chemistry and structure-reactivity relationships). The molecular and electronic structures of the supported vanadium oxide phases were determined by the application of modern in situ characterization techniques (Raman, IR, UV-vis, XANES, EXAFS, solid state (51)V NMR and isotopic oxygen exchange). The characterization studies revealed that the supported vanadium oxide phase consists of two-dimensional surface vanadia sites dispersed on the oxide supports. Corresponding surface chemistry and reactivity studies demonstrated that the surface vanadia sites are the catalytic active sites for oxidation reactions by supported vanadia catalysts. Combination of characterization and reactivity studies demonstrate that the oxide support controls the redox properties of the surface vanadia sites that can be varied by as much as a factor of ~10(3).

  13. The innovation catalysts.

    Science.gov (United States)

    Martin, Roger L

    2011-06-01

    A few years ago the software development company Intuit realized that it needed a new approach to galvanizing customers. The company's Net Promoter Score was faltering, and customer recommendations of new products were especially disappointing. Intuit decided to hold a two-day, off-site meeting for the company's top 300 managers with a focus on the role of design in innovation. One of the days was dedicated to a program called Design for Delight. The centerpiece of the day was a PowerPoint presentation by Intuit founder Scott Cook, who realized midway through that he was no Steve Jobs: The managers listened dutifully, but there was little energy in the room. By contrast, a subsequent exercise in which the participants worked through a design challenge by creating prototypes, getting feedback, iterating, and refining, had them mesmerized. The eventual result was the creation of a team of nine design-thinking coaches--"innovation catalysts"--from across Intuit who were made available to help any work group create prototypes, run experiments, and learn from customers. The process includes a "painstorm" (to determine the customer's greatest pain point), a "soljam" (to generate and then winnow possible solutions), and a "code-jam" (to write code "good enough" to take to customers within two weeks). Design for Delight has enabled employees throughout Intuit to move from satisfying customers to delighting them.

  14. Well-defined silica supported aluminum hydride: another step towards the utopian single site dream?† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5sc02276b Click here for additional data file.

    Science.gov (United States)

    Werghi, Baraa; Bendjeriou-Sedjerari, Anissa; Sofack-Kreutzer, Julien; Jedidi, Abdesslem; Abou-Hamad, Edy

    2015-01-01

    of a strained siloxane bridge, Si–O–Si but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O–Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a β-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al–H bond and a O–Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10–5 mbar) generates Al–H through a β-H elimination of isobutyl fragment. These supported well-defined Al–H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and 27Al–1H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system. PMID:28757945

  15. Real-time single-molecule tethered particle motion experiments reveal the kinetics and mechanisms of Cre-mediated site-specific recombination

    Science.gov (United States)

    Fan, Hsiu-Fang

    2012-01-01

    Tyrosine family recombinases (YRs) are widely utilized in genome engineering systems because they can easily direct DNA rearrangement. Cre recombinases, one of the most commonly used types of YRs, catalyze site-specific recombination between two loxP sites without the need for high-energy cofactors, other accessory proteins or a specific DNA target sequence between the loxP sites. Previous structural, analytical ultracentrifuge and electrophoretic analyses have provided details of the reaction kinetics and mechanisms of Cre recombinase activity; whether there are reaction intermediates or side pathways involved has been left unaddressed. Using tethered particle motion (TPM), the Cre-mediated site-specific recombination process has been delineated, from beginning to end, at the single-molecule level, including the formation of abortive complexes and wayward complexes blocking inactive nucleoprotein complexes from entering the recombination process. Reversibility in the strand-cleavage/-ligation process and the formation of a thermally stable Holliday junction intermediate were observed within the Cre-mediated site-specific recombination process. Rate constants for each elementary step, which explain the overall reaction outcomes under various conditions, were determined. Taking the findings of this study together, they demonstrate the potential of single-molecule methodology as an alternative approach for exploring reaction mechanisms in detail. PMID:22467208

  16. Spontaneous Ag-Nanoparticle Growth at Single-Walled Carbon Nanotube Defect Sites: A Tool for In Situ Generation of SERS Substrate

    Directory of Open Access Journals (Sweden)

    Jason Maley

    2011-01-01

    Full Text Available Silver nanoparticles were spontaneously formed on pristine and oxidized single-wall nanotubes. Nanoparticles were observed on carbon nanotubes with AFM, and the presence of Ag nanoparticles were confirmed by ESR experiments. Raman spectroscopy of the Ag-treated carbon nanotubes had a 4–10X enhancement of intensity compared to untreated carbon nanotubes. Ag nanoparticles formed at defect sites on the CNT surface, where free electrons located at the defect sites reduced Ag+ to Ag. A mechanism for the propagation of the nanoparticles is through a continual negative charge generation on the nanoparticle by electron transfer from doublet oxygen (O2−.

  17. Geochemical Processes Data Package for the Vadose Zone in the Single-Shell Tank Waste Management Areas at the Hanford Site

    Energy Technology Data Exchange (ETDEWEB)

    Cantrell, Kirk J.; Zachara, John M.; Dresel, P. Evan; Krupka, Kenneth M.; Serne, R. Jeffrey

    2007-09-28

    This data package discusses the geochemistry of vadose zone sediments beneath the single-shell tank farms at the U.S. Department of Energy’s (DOE’s) Hanford Site. The purpose of the report is to provide a review of the most recent and relevant geochemical process information available for the vadose zone beneath the single-shell tank farms and the Integrated Disposal Facility. Two companion reports to this one were recently published which discuss the geology of the farms (Reidel and Chamness 2007) and groundwater flow and contamination beneath the farms (Horton 2007).

  18. Catalyst in Basic Oleochemicals

    Directory of Open Access Journals (Sweden)

    Eva Suyenty

    2007-10-01

    Full Text Available Currently Indonesia is the world largest palm oil producer with production volume reaching 16 million tones per annum. The high crude oil and ethylene prices in the last 3 – 4 years contribute to the healthy demand growth for basic oleochemicals: fatty acids and fatty alcohols. Oleochemicals are starting to replace crude oil derived products in various applications. As widely practiced in petrochemical industry, catalyst plays a very important role in the production of basic oleochemicals. Catalytic reactions are abound in the production of oleochemicals: Nickel based catalysts are used in the hydrogenation of unsaturated fatty acids; sodium methylate catalyst in the transesterification of triglycerides; sulfonic based polystyrene resin catalyst in esterification of fatty acids; and copper chromite/copper zinc catalyst in the high pressure hydrogenation of methyl esters or fatty acids to produce fatty alcohols. To maintain long catalyst life, it is crucial to ensure the absence of catalyst poisons and inhibitors in the feed. The preparation methods of nickel and copper chromite catalysts are as follows: precipitation, filtration, drying, and calcinations. Sodium methylate is derived from direct reaction of sodium metal and methanol under inert gas. The sulfonic based polystyrene resin is derived from sulfonation of polystyrene crosslinked with di-vinyl-benzene. © 2007 BCREC UNDIP. All rights reserved.[Presented at Symposium and Congress of MKICS 2007, 18-19 April 2007, Semarang, Indonesia][How to Cite: E. Suyenty, H. Sentosa, M. Agustine, S. Anwar, A. Lie, E. Sutanto. (2007. Catalyst in Basic Oleochemicals. Bulletin of Chemical Reaction Engineering and Catalysis, 2 (2-3: 22-31.  doi:10.9767/bcrec.2.2-3.6.22-31][How to Link/DOI: http://dx.doi.org/10.9767/bcrec.2.2-3.6.22-31 || or local: http://ejournal.undip.ac.id/index.php/bcrec/article/view/6

  19. Critical Surface Parameters for the Oxidative Coupling of Methane over the Mn-Na-W/SiO2 Catalyst.

    Science.gov (United States)

    Hayek, Naseem S; Lucas, Nishita S; Warwar Damouny, Christine; Gazit, Oz M

    2017-11-22

    The work here presents a thorough evaluation of the effect of Mn-Na-W/SiO 2 catalyst surface parameters on its performance in the oxidative coupling of methane (OCM). To do so, we used microporous dealuminated β-zeolite (Zeo), or mesoporous SBA-15 (SBA), or macroporous fumed silica (Fum) as precursors for catalyst preparation, together with Mn nitrate, Mn acetate and Na 2 WO 4 . Characterizing the catalysts by inductively coupled plasma-optical emission spectroscopy, N 2 physisorption, X-ray diffraction, high-resolution scanning electron microscopy-energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and catalytic testing enabled us to identify critical surface parameters that govern the activity and C 2 selectivity of the Mn-Na-W/SiO 2 catalyst. Although the current paradigm views the phase transition of silica to α-cristobalite as the critical step in obtaining dispersed and stable metal sites, we show that the choice of precursors is equally or even more important with respect to tailoring the right surface properties. Specifically, the SBA-based catalyst, characterized by relatively closed surface porosity, demonstrated low activity and low C 2 selectivity. By contrast, for the same composition, the Zeo-based catalyst showed an open surface pore structure, which translated up to fourfold higher activity and enhanced selectivity. By varying the overall composition of the Zeo catalysts, we show that reducing the overall W concentration reduces the size of the Na 2 WO 4 species and increases the catalytic activity linearly as much as fivefold higher than the SBA catalyst. This linear dependence correlates well to the number of interfaces between the Na 2 WO 4 and Mn 2 O 3 species. Our results combined with prior studies lead us to single out the interface between Na 2 WO 4 and Mn 2 O 3 as the most probable active site for OCM using this catalyst. Synergistic interactions between the various precursors used and the phase transition are discussed in

  20. Study of spent hydrorefining catalysts

    International Nuclear Information System (INIS)

    Gellerman, M.M.; Aliev, R.R.; Sidel'kovskaya, V.G.

    1993-01-01

    Aluminonickelmolybdenum catalysts for diesel fuel hydrorefining have been studied by DTA, XSPS, and diffuse reflection spectroscopy. Chemical and phase states of molybdenum compounds in samples of fresh catalyst, regenerated one after one year operation, and clogged with coke catalyst after five year operation, are determined. Chemical reactions and crystal-phase transformations of the molybdenum compounds during catalyst deactivation and regeneration are discussed

  1. Economically viable production of biodiesel from a rural feedstock from eastern India, P. pinnata oil using a recyclable laboratory synthesized heterogeneous catalyst

    International Nuclear Information System (INIS)

    Singh, Veena; Hameed, Bassim H.; Sharma, Yogesh Chandra

    2016-01-01

    Graphical abstract: Barium zirconate was synthesized by co-precipitation method using nitrates of barium and zirconia and was applied for biodiesel production using karanja oil as feedstock through transesterification reaction. - Highlights: • Barium zirconate have been used as a heterogeneous catalyst for biodiesel production. • Effect of calcination time on stability of catalyst was studied. • 98.79 ± 0.5% of FAME conversion from karanja oil was attained. • Catalyst is stable and can be reused up to nine cycles with conversion up to >65%. • Glycerol obtained as a byproduct was easily purified for better use. - Abstract: Barium zirconate was synthesized by co-precipitation method and its feasibility as a heterogeneous catalyst for production of biodiesel (fatty acid methyl ester) was assessed. Fatty acid methyl ester (FAME) was synthesized through transesterification of karanja oil with methanol. Synthesized barium zirconate was characterized by Thermogravimetric analysis (TGA), Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffractometry (XRD), Energy dispersive X-ray spectroscopy (EDS), and Scanning Electron Microscope (SEM). Specific surface area and basicity of the catalyst were also deliberated. Catalyst characterization indicated formation of single phase of barium zirconate which was capable of catalyzing the transesterification of esterified karanja oil with methanol. Feedstock was characterized by Gas Chromatography Mass Spectrometry (GC–MS). Reaction conditions such as molar ratio (oil:methanol), catalyst concentration, temperature, time, stirring speed and catalyst reusability were optimized. Calcination temperature and time significantly affected the catalytic activity of the catalyst because of variation in availability of basic sites. FAME conversion of 98.79 ± 0.5% was obtained at catalyst concentration of 1.0 wt%, 1:27 M ratio (oil:methanol), 65 °C for a 3 h contact time. The catalyst could be

  2. The optimal anatomic site for a single slice to estimate the total volume of visceral adipose tissue by using the quantitative computed tomography (QCT) in Chinese population.

    Science.gov (United States)

    Cheng, X; Zhang, Y; Wang, C; Deng, W; Wang, L; Duanmu, Y; Li, K; Yan, D; Xu, L; Wu, C; Shen, W; Tian, W

    2018-03-20

    To investigate the relationship between the cross-sectional visceral adipose tissue (VAT) areas at different anatomic sites and the total VAT volume in a healthy Chinese population using quantitative computed tomography (QCT), and to identify the optimal anatomic site for a single slice to estimate the total VAT volume. A total of 389 healthy Chinese subjects aged 19-63 years underwent lumbar spine QCT scans. The cross-sectional area of total adipose tissue and VAT were measured using the tissue composition module of the software (QCT Pro, Mindways) at each intervertebral disc level from T 12 /L 1 to L 5 /S 1 , as well as at the umbilical level. The total VAT volume was defined as the fat areas multiplied by the height of vertebral body for all six slices. Statistical analysis was performed to determine the correlation between single-slice VAT areas and the total VAT volume. Moreover, the optimal anatomic site for a single slice to estimate the total VAT volume was identified by multiple regression analysis. The cross-sectional area of VAT and subcutaneous adipose tissue (SAT) measured at each anatomic site was all highly correlated with the total VAT volume and the total SAT volume (r = 0.89-0.98). Additionally, the VAT area measured at the L 2 /L 3 level showed the strongest correlation with the total VAT volume (r = 0.98, P VAT volume. It is feasible to perform measurements of VAT area on a single slice at L 2 /L 3 level for estimating the total VAT volume.

  3. Engineered single nucleotide polymorphisms in the mosquito MEK docking site alter Plasmodium berghei development in Anopheles gambiae

    Science.gov (United States)

    2014-01-01

    Background Susceptibility to Plasmodium infection in Anopheles gambiae has been proposed to result from naturally occurring polymorphisms that alter the strength of endogenous innate defenses. Despite the fact that some of these mutations are known to introduce non-synonymous substitutions in coding sequences, these mutations have largely been used to rationalize knockdown of associated target proteins to query the effects on parasite development in the mosquito host. Here, we assay the effects of engineered mutations on an immune signaling protein target that is known to control parasite sporogonic development. By this proof-of-principle work, we have established that naturally occurring mutations can be queried for their effects on mosquito protein function and on parasite development and that this important signaling pathway can be genetically manipulated to enhance mosquito resistance. Methods We introduced SNPs into the A. gambiae MAPK kinase MEK to alter key residues in the N-terminal docking site (D-site), thus interfering with its ability to interact with the downstream kinase target ERK. ERK phosphorylation levels in vitro and in vivo were evaluated to confirm the effects of MEK D-site mutations. In addition, overexpression of various MEK D-site alleles was used to assess P. berghei infection in A. gambiae. Results The MEK D-site contains conserved lysine residues predicted to mediate protein-protein interaction with ERK. As anticipated, each of the D-site mutations (K3M, K6M) suppressed ERK phosphorylation and this inhibition was significant when both mutations were present. Tissue-targeted overexpression of alleles encoding MEK D-site polymorphisms resulted in reduced ERK phosphorylation in the midgut of A. gambiae. Furthermore, as expected, inhibition of MEK-ERK signaling due to D-site mutations resulted in reduction in P. berghei development relative to infection in the presence of overexpressed catalytically active MEK. Conclusion MEK-ERK signaling in

  4. Extended Catalyst Longevity Via Supercritical Isobutane Regeneration of a Partially Deactivated USY Alkylation Catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Daniel M. Ginosar; David N. Thompson; Kyle C. Burch; David J. Zalewski

    2005-05-01

    Off-line, in situ activity recovery of a partially deactivated USY zeolite catalyst used for isobutane/butene alkylation was examined in a continuous-flow reaction system employing supercritical isobutane. Catalyst samples were deactivated in a controlled manner by running them to either to a fixed butene conversion level of 95% or a fixed time on stream of three hours, and then exposing the catalyst to supercritical isobutane to restore activity. Activity recovery was determined by comparing alkylation activity before and after the regeneration step. Both single and multiple regenerations were performed. Use of a 95% butene conversion level criterion to terminate the reaction step afforded 86% activity recovery for a single regeneration and provided nine sequential reaction steps for the multiple regeneration studies. Employing a fixed 3 h time on stream criterion resulted in nearly complete activity recovery for a single regeneration, and 24 reaction steps were demonstrated in sequence for the multiple regeneration process, producing only minor product yield declines per step. This resulted in a 12-fold increase in catalyst longevity versus unregenerated catalyst.

  5. Biomimetic Water-Oxidation Catalysts: Manganese Oxides.

    Science.gov (United States)

    Kurz, Philipp

    2016-01-01

    The catalytic oxidation of water to molecular oxygen is a key process for the production of solar fuels. Inspired by the biological manganese-based active site for this reaction in the enzyme Photosystem II, researchers have made impressive progress in the last decades regarding the development of synthetic manganese catalysts for water oxidation. For this, it has been especially fruitful to explore the many different types of known manganese oxides MnOx. This chapter first offers an overview of the structural, thermodynamic, and mechanistic aspects of water-oxidation catalysis by MnOx. The different test systems used for catalytic studies are then presented together with general reactivity trends. As a result, it has been possible to identify layered, mixed Mn (III/IV)-oxides as an especially promising class of bio-inspired catalysts and an attempt is made to give structure-based reasons for the good performances of these materials. In the outlook, the challenges of catalyst screenings (and hence the identification of a "best MnOx catalyst") are discussed. There is a great variety of reaction conditions which might be relevant for the application of manganese oxide catalysts in technological solar fuel-producing devices, and thus catalyst improvements are currently still addressing a very large parameter space. Nonetheless, detailed knowledge about the biological catalyst and a solid experimental basis concerning the syntheses and water-oxidation reactivities of MnOx materials have been established in the last decade and thus this research field is well positioned to make important contributions to solar fuel research in the future.

  6. Catalyst for microelectromechanical systems microreactors

    Science.gov (United States)

    Morse, Jeffrey D [Martinez, CA; Sopchak, David A [Livermore, CA; Upadhye, Ravindra S [Pleasanton, CA; Reynolds, John G [San Ramon, CA; Satcher, Joseph H [Patterson, CA; Gash, Alex E [Brentwood, CA

    2010-06-29

    A microreactor comprising a silicon wafer, a multiplicity of microchannels in the silicon wafer, and a catalyst coating the microchannels. In one embodiment the catalyst coating the microchannels comprises a nanostructured material. In another embodiment the catalyst coating the microchannels comprises an aerogel. In another embodiment the catalyst coating the microchannels comprises a solgel. In another embodiment the catalyst coating the microchannels comprises carbon nanotubes.

  7. Mesodermal repression of single-minded in Drosophila embryo is mediated by a cluster of Snail-binding sites proximal to the early promoter

    Directory of Open Access Journals (Sweden)

    Kye Won Park1 & Joung-Woo Hong2,*

    2012-10-01

    Full Text Available single-minded (sim is a master regulatory gene that directs differentiationin the central nervous system during Drosophilaembryogenesis. Recent identification of the mesectoderm enhancer(MSE of sim has led to the hypothesis that two Snail(Sna-binding sites in the MSE may repress sim expression inthe presumptive mesoderm. We provide evidence here thatthree Sna-binding sites proximal to the sim promoter, but notthose of the MSE, are responsible for the mesodermal repressionof sim in vivo. Using transgenic embryos injectedwith lacZ transgenes, we showed that sim repression in themesoderm requires the three promoter-proximal Sna-bindingsites. These results suggest that Sna represses the mesectodermalexpression of sim by directly repressing the nearby promoter,and not by quenching adjacent transcriptional activatorsin the MSE. These data also showed how the MSE, lackingthe three proximal Sna-binding sites, reproduced the endogenouspattern of sim expression in transgenic embryos.

  8. No difference in incidence of port-site hernia and chronic pain after single-incision laparoscopic cholecystectomy versus conventional laparoscopic cholecystectomy

    DEFF Research Database (Denmark)

    Christoffersen, Mette W; Brandt, Erik; Oehlenschläger, Jacob

    2015-01-01

    and matched 1:2 with patients subjected to CLC using pre-defined criteria. Follow-up data were obtained from the Danish National Patient Registry, mailed patient questionnaires, and clinical examination. A port-site hernia was defined as a repair for a port-site hernia or clinical hernia located at one......BACKGROUND: Conventional laparoscopic cholecystectomy (CLC) is regarded as the gold standard for cholecystectomy. However, single-incision laparoscopic cholecystectomy (SLC) has been suggested to replace CLC. This study aimed at comparing long-term incidences of port-site hernia and chronic pain...... after SLC versus CLC. METHODS: We conducted a matched cohort study based on prospective data (Jan 1, 2009-June 1, 2011) from the Danish Cholecystectomy Database with perioperative information and clinical follow-up. Consecutive patients undergoing elective SLC during the study period were included...

  9. Catalysts and method

    Science.gov (United States)

    Taylor, Charles E.; Noceti, Richard P.

    1991-01-01

    An improved catlayst and method for the oxyhydrochlorination of methane is disclosed. The catalyst includes a pyrogenic porous support on which is layered as active material, cobalt chloride in major proportion, and minor proportions of an alkali metal chloride and of a rare earth chloride. On contact of the catalyst with a gas flow of methane, HC1 and oxygen, more than 60% of the methane is converted and of that converted more than 40% occurs as monochloromethane. Advantageously, the monochloromethane can be used to produce gasoline boiling range hydrocarbons with the recycle of HCl for further reaction. This catalyst is also of value for the production of formic acid as are analogous catalysts with lead, silver or nickel chlorides substituted for the cobalt chloride.

  10. Epoxidation catalyst and process

    Science.gov (United States)

    Linic, Suljo; Christopher, Phillip

    2010-10-26

    Disclosed herein is a catalytic method of converting alkenes to epoxides. This method generally includes reacting alkenes with oxygen in the presence of a specific silver catalyst under conditions suitable to produce a yield of the epoxides. The specific silver catalyst is a silver nanocrystal having a plurality of surface planes, a substantial portion of which is defined by Miller indices of (100). The reaction is performed by charging a suitable reactor with this silver catalyst and then feeding the reactants to the reactor under conditions to carry out the reaction. The reaction may be performed in batch, or as a continuous process that employs a recycle of any unreacted alkenes. The specific silver catalyst has unexpectedly high selectivity for epoxide products. Consequently, this general method (and its various embodiments) will result in extraordinarily high epoxide yields heretofore unattainable.

  11. Single-charge craters excavated during subsurface high-explosive experiments at Big Black Test Site, Mississippi

    International Nuclear Information System (INIS)

    Woodruff, W.R.; Bryan, J.B.

    1978-01-01

    Single-charge and row-charge subsurface cratering experiments were performed to learn how close-spacing enhances single-crater dimensions. Our first experimental phase established cratering curves for 60-lb charges of the chemical explosive. For the second phase, to be described in a subsequent report, the Row-cratering experiments were designed and executed. This data report contains excavated dimensions and auxiliary data for the single-charge cratering experiments. The dimensions for the row-charge experiments will be in the other report. Significant changes in the soil's water content appeared to cause a variability in the excavated dimensions. This variability clouded the interpretation and application of the cratering curves obtained

  12. Influence of hydrogen treatment on SCR catalysts

    DEFF Research Database (Denmark)

    Due-Hansen, Johannes

    reduction (SCR) process, i.e. the catalytic removal of NOx from the flue gas. A series of experiments was conducted to reveal the impact on the NO SCR activity of a industrial DeNOX catalyst (3%V2O5-7%WO3/TiO2) by treatment of H2. Standard conditions were treatment of the SCR catalyst for 60 min with three......Municipal waste flue gas was previously found to deactivate the Pt-based CO oxidation catalyst severely. In the specific case studied, siloxanes were found to cause the deactivation. An on-site method for complete regeneration of the catalysts activity was found without shutdown of the flue gas...... stream, i.e. by in situ treatment of the Pt-catalyst by reductive H2-gas. However, the introduction of H2 gas in the gas stream could also affect other units in the tail pipe gas cleaning system. Of special interest in this study is the effect of hydrogen gas on the performance of the selective catalytic...

  13. Latent olefin metathesis catalysts

    OpenAIRE

    Monsaert, Stijn; Lozano Vila, Ana; Drozdzak, Renata; Van Der Voort, Pascal; Verpoort, Francis

    2009-01-01

    Olefin metathesis is a versatile synthetic tool for the redistribution of alkylidene fragments at carbon-carbon double bonds. This field, and more specifically the development of task-specific, latent catalysts, attracts emerging industrial and academic interest. This tutorial review aims to provide the reader with a concise overview of early breakthroughs and recent key developments in the endeavor to develop latent olefin metathesis catalysts, and to illustrate their use by prominent exampl...

  14. Plasmatron-catalyst system

    Science.gov (United States)

    Bromberg, Leslie; Cohn, Daniel R.; Rabinovich, Alexander; Alexeev, Nikolai

    2007-10-09

    A plasmatron-catalyst system. The system generates hydrogen-rich gas and comprises a plasmatron and at least one catalyst for receiving an output from the plasmatron to produce hydrogen-rich gas. In a preferred embodiment, the plasmatron receives as an input air, fuel and water/steam for use in the reforming process. The system increases the hydrogen yield and decreases the amount of carbon monoxide.

  15. Catalyst system comprising a first catalyst system tethered to a supported catalyst

    Science.gov (United States)

    Angelici, Robert J.; Gao, Hanrong

    1998-08-04

    The present invention provides new catalyst formats which comprise a supported catalyst tethered to a second and different catalyst by a suitable tethering ligand. A preferred system comprises a heterogeneous supported metal catalyst tethered to a homogeneous catalyst. This combination of homogeneous and heterogeneous catalysts has a sufficient lifetime and unusually high catalytic activity in arene hydrogenations, and potentially many other reactions as well, including, but not limited to hydroformylation, hydrosilation, olefin oxidation, isomerization, hydrocyanation, olefin metathesis, olefin polymerization, carbonylation, enantioselective catalysis and photoduplication. These catalysts are easily separated from the products, and can be reused repeatedly, making these systems very economical.

  16. Survey package: Technical and contracting strategies for single-shell tank waste retrieval on the Hanford Site

    International Nuclear Information System (INIS)

    Ramsower, D.C.

    1995-01-01

    Westinghouse Hanford Company is interested in innovative, commercially available or adaptable retrieval system equipment, concepts, and contracting strategies that will ad to existing Hanford Site technology and significantly reduce cost and/or risk from the baseline retrieval approach of sluicing (hydraulically mining) the waste from the SSTs onsite. The objective of this request is to gather information from industry to identify and summarize a suite of retrieval-related components, systems, and contracting approaches. This information will be used to ensure that WHC understands the various waste retrieval alternative approaches, their risks, and their application on the Hanford Site tanks for those occasions when sluicing is not sufficiently effective, appropriate, or cost-effective. An additional objective is to facilitate industry's understanding of the tank and site interface requirements for SST waste retrieval and the complex statutory, legal, regulatory, labor, and other institutional standards being applied to the Hanford Site. This effort will identify and summarize retrieval solutions by the end of September 1996 so that a clear basis for future retrieval program decisions can be established

  17. Different acoustic wave effects of thickness extension and thickness shear mode resonance oscillation on ethanol decomposition over Pd catalysts deposited on poled ferroelectric LiNbO 3 single crystals

    Science.gov (United States)

    Yukawa, Y.; Saito, N.; Nishiyama, H.; Inoue, Y.

    2003-06-01

    The vibration mode effects of resonance oscillation (RO) on ethanol decomposition over thin Pd film catalysts were studied using thickness shear mode RO (TSRO) and thickness extension mode RO (TERO). The TSRO accelerated neither ethylene nor acetaldehyde productions, whereas the TERO increased selectivity for ethylene production dramatically. Laser Doppler method showed that the TSRO caused small vertical lattice displacement, which contrasted to large vertical lattice displacement of the TERO. Photoelectron emission spectra showed clear differences in threshold energy shifts between TSRO and TERO: the TSRO induced little threshold energy shift, but the TERO caused marked positive shifts. A mechanism of catalyst activation due to the lattice vibration modes is discussed.

  18. Pediatric Emergency Department Suicidal Patients: Two-Site Evaluation of Suicide Ideators, Single Attempters, and Repeat Attempters

    Science.gov (United States)

    Asarnow, Joan Rosenbaum; Baraff, Larry J.; Berk, Michele; Grob, Charles; Devich-Navarro, Mona; Suddath, Robert; Piacentini, John; Tang, Lingqi

    2008-01-01

    The study examines ideators, single attempters, and repeats attempters of suicide to clarify optimal strategies for emergency department management and risk assessment to help them in reducing youth suicide and suicide attempts. Depression was found to be a strong predictor of suicide/suicide attempts along with substance use, externalizing…

  19. The effect of driving force on intramolecular electron transfer in proteins. Studies on single-site mutated azurins

    DEFF Research Database (Denmark)

    Farver, O; Skov, L K; van de Kamp, M

    1992-01-01

    An intramolecular electron-transfer process has previously been shown to take place between the Cys3--Cys26 radical-ion (RSSR-) produced pulse radiolytically and the Cu(II) ion in the blue single-copper protein, azurin [Farver, O. & Pecht, I. (1989) Proc. Natl Acad. Sci. USA 86, 6868-6972]. To fu...

  20. Photopicking : In Situ Approach for Site-Specific Attachment of Single Multiprotein Nanoparticles to Atomic Force Microscopy Tips

    NARCIS (Netherlands)

    Liashkovich, Ivan; Rosso, Gonzalo; Rangl, Martina; Ebner, Andreas; Hafezi, Wali; Kühn, Joachim; Schön, Peter; Hinterdorfer, Peter; Shahin, Victor

    2017-01-01

    Ligand–receptor interactions are fundamental in life sciences and include hormone–receptor, protein–protein, pathogen–host, and cell–cell interactions, among others. Atomic force microscopy (AFM) proved to be invaluable for scrutinizing ligand–receptor interactions at the single molecular level.

  1. Effect of connective tissue grafting on peri-implant tissue in single immediate implant sites : A RCT

    NARCIS (Netherlands)

    Zuiderveld, Elise G; Meijer, Henny J A; den Hartog, Laurens; Vissink, Arjan; Raghoebar, Gerry M

    AimTo assess the effect of connective tissue grafting on the mid-buccal mucosal level (MBML) of immediately placed and provisionalized single implants in the maxillofacial aesthetic zone. Materials and methodsSixty patients with a failing tooth were provided with an immediately placed and

  2. In-situ Studies of the Reactions of Bifunctional and Heterocyclic Molecules over Noble Metal Single Crystal and Nanoparticle Catalysts Studied with Kinetics and Sum-Frequency Generation Vibrational Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kliewer, Christopher J. [Univ. of California, Berkeley, CA (United States)

    2009-06-30

    Sum frequency generation surface vibrational spectroscopy (SFG-VS) in combination with gas chromatography (GC) was used in-situ to monitor surface bound reaction intermediates and reaction selectivities for the hydrogenation reactions of pyrrole, furan, pyridine, acrolein, crotonaldehyde, and prenal over Pt(111), Pt(100), Rh(111), and platinum nanoparticles under Torr reactant pressures and temperatures of 300K to 450K. The focus of this work is the correlation between the SFG-VS observed surface bound reaction intermediates and adsorption modes with the reaction selectivity, and how this is affected by catalyst structure and temperature. Pyrrole hydrogenation was investigated over Pt(111) and Rh(111) single crystals at Torr pressures. It was found that pyrrole adsorbs to Pt(111) perpendicularly by cleaving the N-H bond and binding through the nitrogen. However, over Rh(111) pyrrole adsorbs in a tilted geometry binding through the {pi}-aromatic orbitals. A surface-bound pyrroline reaction intermediate was detected over both surfaces with SFG-VS. It was found that the ring-cracking product butylamine is a reaction poison over both surfaces studied. Furan hydrogenation was studied over Pt(111), Pt(100), 10 nm cubic platinum nanoparticles and 1 nm platinum nanoparticles. The product distribution was observed to be highly structure sensitive and the acquired SFG-VS spectra reflected this sensitivity. Pt(100) exhibited more ring-cracking to form butanol than Pt(111), while the nanoparticles yielded higher selectivities for the partially saturated ring dihydrofuran. Pyridine hydrogenation was investigated over Pt(111) and Pt(100). The α-pyridyl surface adsorption mode was observed with SFG-VS over both surfaces. 1,4-dihydropyridine was seen as a surface intermediate over Pt(100) but not Pt(111). Upon heating the surfaces to 350K, the adsorbed pyridine changes to a flat-lying adsorption mode. No evidence was found for the pyridinium cation. The hydrogenation of the

  3. Hydrogenation of Tetralin over Supported Ni and Ir Catalysts

    Directory of Open Access Journals (Sweden)

    Dipali P. Upare

    2013-01-01

    Full Text Available Selective hydrogenation and ring opening (SRO of tetrahydronaphthalene (tetralin was studied over nickel and iridium supported catalysts in the context of the removal of polynuclear aromatics from diesel fuel. The tetralin hydrogenation was carried out in a fixed-bed reactor at 270°C, using H2 pressure of 30 bars, WHSV of 2.3 h−1, and H2/feed molar ratio of 40; the resultant products were analyzed by GC and GC-MS. The Ir/SiO2 catalyst gave 85% of tetralin conversion and 75.1% of decalin products selectivity whereas Ni/SiO2 catalyst showed an unprecedented high catalytic performance with 88.3% of tetralin conversion and 93% of decalin products selectivity. The catalysts were characterized by using different characterization techniques such as XRD, TPR, and HR-TEM to know the physicochemical properties as well as active sites in the catalysts.

  4. [Analysis of Single Particle Aging and Mixing State at an Agriculture Site (Quzhou) in the North China Plain in Summer Using a Single Particle Aerosol Mass Spectrometer].

    Science.gov (United States)

    Huang, Zi-long; Zeng, Li-mm; Dong, I-Iua-Bin; Li, Mei; Zhu, Tong

    2016-04-15

    To characterize the size distribution and chemical ompsitins f abiet prtices t a agicuturesit intheNorh o Chinese Plain, a single particle aerosol mass spectrometer (SPAMS) was deployed from June 30 to July 8, 2013. A total of 230,152 particles in the size range of 0.2-2.0 pm were chemically analyzed with both positive and negative ion spectra. The results revealed that aerosol could he classified into eight dominant groups, including elemental carbon (EC, 55.5%), organic carbon (OC, 10.7%), alkalis (Na-K, 17.4%), other metals (1.7%), Fe-rich (6.3%), Pb-rich (3.1%), dust (4.8%), and other (0.8%). The observed eight types of particles contained secondary components such as 46NO2-, 62NO3-, 96SO3-, 96SO4-, 97HSO4-, showing that they probably went through different aging processes. The analysis of particle size distribution showed that 700-800 nm was the peak value of all particles, and that dust and Fe particles were mainly in the coarse size range. EC particles subtype group research revealed EC particles tended to be aging with the above mentioned secondary ions and eventually led to a particle type conversion from EC to the less aging ECN and the more serious aging ECS, the diurnal variation of which was obviously negatively correlated, and there was a possibility of forming OC/EC mixture with the adsorption of secondary organic matter on EC surface.

  5. A single base difference between Pit-1 binding sites at the hGH promoter and locus control region specifies distinct Pit-1 conformations and functions.

    Science.gov (United States)

    Shewchuk, Brian M; Ho, Yugong; Liebhaber, Stephen A; Cooke, Nancy E

    2006-09-01

    Activation of the human growth hormone (hGH-N) gene in pituitary somatotropes is mediated by a locus control region (LCR). This LCR is composed of DNase I-hypersensitive sites (HS) located -14.5 kb to -32 kb relative to the hGH-N promoter. HSI, at -14.5 kb, is the dominant determinant of hGH-N expression and is essential for establishment of a 32-kb domain of histone acetylation that encompasses the active hGH locus. This activity is conferred by three binding sites for the POU domain transcription factor Pit-1. These Pit-1 elements are sufficient to activate hGH-N expression in the mouse pituitary. In contrast, Pit-1 sites at the hGH-N promoter are consistently unable to mediate similar activity. In the present study, we demonstrate that the functional difference between the promoter-proximal and the HSI Pit-1 binding sites can be attributed in part to a single base difference. This base affects the conformation of the Pit-1/DNA complex, and reciprocal exchange of the divergent bases between the two sets of Pit-1 elements results in a partial reversal of their transgenic activities. These data support a model in which the Pit-1 binding sites in the hGH LCR allosterically program the bound Pit-1 complex for chromatin activating functions.

  6. Biomimetic catalysts responsive to specific chemical signals

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yan [Iowa State Univ., Ames, IA (United States)

    2015-03-04

    Part 1. Design of Biomimetic Catalysts Based on Amphiphilic Systems The overall objective of our research is to create biomimetic catalysts from amphiphilic molecules. More specifically, we aim to create supramolecular systems that can be used to control the microenvironment around a catalytic center in a biomimetic fashion and apply the learning to construct supramolecular catalysts with novel functions found in enzymatic catalysts. We have prepared synthetic molecules (i.e., foldamers) that could fold into helical structures with nanometer-sized internal hydrophilic cavities. Cavities of this size are typically observed only in the tertiary and quaternary structures of proteins but were formed in our foldamer prepared in just a few steps from the monomer. Similar to many proteins, our foldamers displayed cooperativity in the folding/unfolding equilibrium and followed a two-state conformational transition. In addition, their conformational change could be triggered by solvent polarity, pH, or presence of metal ions and certain organic molecules. We studied their environmentally dependent conformational changes in solutions, surfactant micelles, and lipid bilayer membranes. Unlike conventional rigid supramolecular host, a foldamer undergoes conformational change during guest binding. Our study in the molecular recognition of an oligocholate host yielded some extremely exciting results. Cooperativity between host conformation and host–guest interactions was found to “magnify” weak binding interactions. In other words, since binding affinity is determined by the overall change of free energy during the binding, guest-induced conformational change of the host, whether near or far from the binding site, affects the binding. This study has strong implications in catalysis because enzymes have been hypothesized to harvest similar intramolecular forces to strengthen their binding with the transition state of an enzyme-catalyzed reaction. The supramolecular and

  7. Magnetic and dendritic catalysts.

    Science.gov (United States)

    Wang, Dong; Deraedt, Christophe; Ruiz, Jaime; Astruc, Didier

    2015-07-21

    The recovery and reuse of catalysts is a major challenge in the development of sustainable chemical processes. Two methods at the frontier between homogeneous and heterogeneous catalysis have recently emerged for addressing this problem: loading the catalyst onto a dendrimer or onto a magnetic nanoparticle. In this Account, we describe representative examples of these two methods, primarily from our research group, and compare them. We then describe new chemistry that combines the benefits of these two methods of catalysis. Classic dendritic catalysis has involved either attaching the catalyst covalently at the branch termini or within the dendrimer core. We have used chelating pyridyltriazole ligands to insolubilize catalysts at the termini of dendrimers, providing an efficient, recyclable heterogeneous catalysts. With the addition of dendritic unimolecular micelles olefin metathesis reactions catalyzed by commercial Grubbs-type ruthenium-benzylidene complexes in water required unusually low amounts of catalyst. When such dendritic micelles include intradendritic ligands, both the micellar effect and ligand acceleration promote faster catalysis in water. With these types of catalysts, we could carry out azide alkyne cycloaddition ("click") chemistry with only ppm amounts of CuSO4·5H2O and sodium ascorbate under ambient conditions. Alternatively we can attach catalysts to the surface of superparamagnetic iron oxide nanoparticles (SPIONs), essentially magnetite (Fe3O4) or maghemite (γ-Fe2O3), offering the opportunity to recover the catalysts using magnets. Taking advantage of the merits of both of these strategies, we and others have developed a new generation of recyclable catalysts: dendritic magnetically recoverable catalysts. In particular, some of our catalysts with a γ-Fe2O3@SiO2 core and 1,2,3-triazole tethers and loaded with Pd nanoparticles generate strong positive dendritic effects with respect to ligand loading, catalyst loading, catalytic activity and

  8. Haemodynamic consequences of targeted single- and dual-site right ventricular pacing in adults with congenital heart disease undergoing surgical pulmonary valve replacement

    Science.gov (United States)

    Plymen, Carla M.; Finlay, Malcolm; Tsang, Victor; O'leary, Justin; Picaut, Nathalie; Cullen, Shay; Walker, Fiona; Deanfield, John E; Hsia, T.Y.; Bolger, Aidan P.; Lambiase, Pier D.

    2015-01-01

    Aims The purpose of this study was to create an epicardial electroanatomic map of the right ventricle (RV) and then apply post-operative-targeted single- and dual-site RV temporary pacing with measurement of haemodynamic parameters. Cardiac resynchronization therapy is an established treatment for symptomatic left ventricular (LV) dysfunction. In congenital heart disease, RV dysfunction is a common cause of morbidity—little is known regarding the potential benefits of CRT in this setting. Methods and results Sixteen adults (age = 32 ± 8 years; 6 M, 10 F) with right bundle branch block (RBBB) and repaired tetralogy of Fallot (n = 8) or corrected congenital pulmonary stenosis (n = 8) undergoing surgical pulmonary valve replacement (PVR) for pulmonary regurgitation underwent epicardial RV mapping and haemodynamic assessment of random pacing configurations including the site of latest RV activation. The pre-operative pulmonary regurgitant fraction was 49 ± 10%; mean LV end-diastolic volume (EDV) 85 ± 19 mL/min/m2 and RVEDV 183 ± 89 mL/min/m2 on cardiac magnetic resonance imaging. The mean pre-operative QRS duration is 136 ± 26 ms. The commonest site of latest activation was the RV free wall and DDD pacing here alone or combined with RV apical pacing resulted in significant increases in cardiac output (CO) vs. AAI pacing (P < 0.01 all measures). DDDRV alternative site pacing significantly improved CO by 16% vs. AAI (P = 0.018), and 8.5% vs. DDDRV apical pacing (P = 0.02). Conclusion Single-site RV pacing targeted to the region of latest activation in patients with RBBB undergoing PVR induces acute improvements in haemodynamics and supports the concept of ‘RV CRT’. Targeted pacing in such patients has therapeutic potential both post-operatively and in the long term. PMID:25371427

  9. Step sites in syngas catalysis

    DEFF Research Database (Denmark)

    Rostrup-Nielsen, J.; Nørskov, Jens Kehlet

    2006-01-01

    Step sites play an important role in many catalytic reactions. This paper reviews recent results on metal catalysts for syngas reactions with emphasis on steam reforming. Modern characterization techniques (STEM, HREM...) and theoretical calculations (DFT) has allowed a more quantitative...

  10. Optimizing CT angiography in patients with Fontan physiology: single-center experience of dual-site power injection

    International Nuclear Information System (INIS)

    Sandler, K.L.; Markham, L.W.; Mah, M.L.; Byrum, E.P.; Williams, J.R.

    2014-01-01

    Aim: To identify adult patients with single-ventricle congenital heart disease and Fontan procedure palliation who have been misdiagnosed with or incompletely evaluated for pulmonary embolism. Additionally, this study was designed to demonstrate that simultaneous, dual-injection of contrast medium into an upper and lower extremity vein is superior to single-injection protocols for CT angiography (CTA) of the chest in this population. Materials and methods: Patients included in the study were retrospectively selected from the Adult Congenital Heart Disease (ACHD) database. Search criteria included history of Fontan palliation and available chest CT examination. Patients were evaluated for (1) type of congenital heart disease and prior operations;(2) indication for initial CT evaluation;(3) route of contrast medium administration for the initial CT examination and resulting diagnosis;(4) whether or not anticoagulation therapy was initiated; and (5) final diagnosis and treatment plan. Results: The query of the ACHD database resulted in 28 individuals or patients with Fontan palliation (superior and inferior venae cavae anastomosed to the pulmonary arteries). Of these, 19 patients with Fontan physiology underwent CTA of the pulmonary circulation, and 17 had suboptimal imaging studies. Unfortunately, seven of these 17 patients (41%) were started on anticoagulation therapy due to a diagnosis of pulmonary embolism that was later excluded. Conclusion: Patients with single-ventricle/Fontan physiology are at risk of thromboembolic disease. Therefore, studies evaluating their complex anatomy must be performed with the optimal imaging protocol to ensure diagnostic accuracy, which is best achieved with dual-injection of an upper and lower extremity central vein. - Highlights: • The adult congenital heart disease population is growing. • Many of these patients have single ventricle/Fontan physiology. • Patients with Fontan physiology are at increased risk for

  11. Characterization and Regeneration of Pt-Catalysts Deactivated in Municipal Waste Flue Gas

    DEFF Research Database (Denmark)

    Rasmussen, Søren Birk; Kustov, Arkadii; Due-Hansen, Johannes

    2006-01-01

    Severe deactivation was observed for industrially aged catalysts used in waste incineration plants and tested in lab-scale. Possible compounds that cause deactivation of these Pt-based CO oxidation catalysts have been studied. Kinetic observations of industrial and model catalysts showed...... that siloxanes were the most severe catalyst poisons, although acidic sulfur compounds also caused deactivation. Furthermore, a method for on-site regeneration without shutdown of the catalytic flue gas cleaning system has been developed, i.e. an addition of H-2/N-2 gas to the off-gas can completely restore...... the activity of the deactivated catalysts. (c) 2006 Elsevier B.V. All rights reserved....

  12. Characterization and regeneration of Pt-catalysts deactivated in municipal waste flue gas

    International Nuclear Information System (INIS)

    Rasmussen, Soeren Birk; Kustov, Arkady; Due-Hansen, Johannes; Fehrmann, Rasmus; Siret, Bernard; Tabaries, Frank

    2006-01-01

    Severe deactivation was observed for industrially aged catalysts used in waste incineration plants and tested in lab-scale. Possible compounds that cause deactivation of these Pt-based CO oxidation catalysts have been studied. Kinetic observations of industrial and model catalysts showed that siloxanes were the most severe catalyst poisons, although acidic sulfur compounds also caused deactivation. Furthermore, a method for on-site regeneration without shutdown of the catalytic flue gas cleaning system has been developed, i.e. an addition of H 2 /N 2 gas to the off-gas can completely restore the activity of the deactivated catalysts. (author)

  13. Enzyme-mediated site-specific bioconjugation of metal complexes to proteins: sortase-mediated coupling of copper-64 to a single-chain antibody.

    Science.gov (United States)

    Paterson, Brett M; Alt, Karen; Jeffery, Charmaine M; Price, Roger I; Jagdale, Shweta; Rigby, Sheena; Williams, Charlotte C; Peter, Karlheinz; Hagemeyer, Christoph E; Donnelly, Paul S

    2014-06-10

    The enzyme-mediated site-specific bioconjugation of a radioactive metal complex to a single-chain antibody using the transpeptidase sortase A is reported. Cage amine sarcophagine ligands that were designed to function as substrates for the sortase A mediated bioconjugation to antibodies were synthesized and enzymatically conjugated to a single-chain variable fragment. The antibody fragment scFv(anti-LIBS) targets ligand-induced binding sites (LIBS) on the glycoprotein receptor GPIIb/IIIa, which is present on activated platelets. The immunoconjugates were radiolabeled with the positron-emitting isotope (64)Cu. The new radiolabeled conjugates were shown to bind selectively to activated platelets. The diagnostic potential of the most promising conjugate was demonstrated in an in vivo model of carotid artery thrombosis using positron emission tomography. This approach gives homogeneous products through site-specific enzyme-mediated conjugation and should be broadly applicable to other metal complexes and proteins. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Suicidal single gunshot injury to the head: differences in site of entrance wound and direction of the bullet path between right- and left-handed--an autopsy study.

    Science.gov (United States)

    Nikolić, Slobodan; Zivković, Vladimir; Babić, Dragan; Juković, Fehim

    2012-03-01

    The aim of this study was to determine the differences in the anatomical site of a gunshot entrance wound and the direction of the bullet path between right- and left-handed subjects who committed a suicide by a single gunshot injury to the head. The retrospective autopsy study was performed for a 10-year period, and it included selected cases of single suicidal gunshot head injury, committed by handguns. We considered only contact or near-contact wounds. The sample included 479 deceased, with average age 47.1 ± 19.1 years (range, 12-89 years): 432 males and 47 females, with 317 right-handed, 25 left-handed, and 137 subjects with unknown dominant hand. In our observed sample, most cases involved the right temple as the site of entrance gunshot wound (about 67%), followed by the mouth (16%), forehead (7%), left temple (6%), submental (2%), and parietal region (1%). The left temple, right temple, and forehead were the sites of the gunshot entrance wounds, which were the best predictors of the handedness of the deceased (Spearman ρ = 0.149, P = 0.006). Our study showed that the direction of the bullet intracranial path in cases of suicide was even a more potent predictor of the handedness of the deceased (Spearman ρ = 0.263, P = 0.000; Wald = 149.503, P = 0.000).

  15. Immediate Loading of Anterior Single-Tooth Implants Placed in Healed Sites: Five-Year Results of a Randomized Clinical Trial.

    Science.gov (United States)

    den Hartog, Laurens; Raghoebar, Gerry M; Stellingsma, Kees; Vissink, Arjan; Meijer, Henny Ja

    The aim of this study was to compare the 5-year outcome of immediate loading with that of conventional loading for anterior single-tooth implants placed in healed sites. It was hypothesized that immediate loading is not inferior to conventional loading. A total of 62 patients with a missing maxillary anterior tooth were included. At random, patients were treated with an implant that was restored either with a nonoccluding temporary crown within 24 hours after implant placement (immediate group) or according to a two-stage procedure after 3 months (conventional group). All implants were placed in healed sites. Follow-up visits were performed after definitive crown delivery and 1 and 5 years thereafter. Outcome measures were radiographic marginal bone level changes, implant survival, complications, soft tissue aspects (probing depth, plaque, bleeding, soft tissue level changes), esthetic outcome, and patient satisfaction. Three patients in each study group were lost to follow-up. No significant differences were found in terms of marginal bone loss (1.16 ± 0.93 mm in the immediate group and 1.20 ± 1.10 mm in the conventional group), survival (one implant lost in the immediate group), complications, soft tissue aspects, esthetic outcome, and patient satisfaction. For anterior single-tooth implants placed in healed sites, the outcome of immediate loading is not inferior to conventional loading.

  16. TOPICAL REVIEW: Nanostructured catalysts in fuel cells

    Science.gov (United States)

    Zhong, Chuan-Jian; Luo, Jin; Fang, Bin; Wanjala, Bridgid N.; Njoki, Peter N.; Loukrakpam, Rameshwori; Yin, Jun

    2010-02-01

    One of the most important challenges for the ultimate commercialization of fuel cells is the preparation of active, robust, and low-cost catalysts. This review highlights some findings of our investigations in the last few years in developing advanced approaches to nanostructured catalysts that address this challenge. Emphasis is placed on nanoengineering-based fabrication, processing, and characterization of multimetallic nanoparticles with controllable size (1-10 nm), shape, composition (e.g. MlnM2100-n, M1nM2mM3100-n-m, M1@M2, where M (1 or 2) = Pt, Co, Ni, V, Fe, Cu, Pd, W, Ag, Au etc) and morphology (e.g. alloy, core@shell etc). In addition to an overview of the fundamental issues and the recent progress in fuel cell catalysts, results from evaluations of the electrocatalytic performance of nanoengineered catalysts in fuel cell reactions are discussed. This approach differs from other traditional approaches to the preparation of supported catalysts in the ability to control the particle size, composition, phase, and surface properties. An understanding of how the nanoscale properties of the multimetallic nanoparticles differ from their bulk-scale counterparts, and how the interaction between the nanoparticles and the support materials relates to the size sintering or evolution in the thermal activation process, is also discussed. The fact that the bimetallic gold-platinum nanoparticle system displays a single-phase character different from the miscibility gap known for its bulk-scale counterpart serves as an important indication of the nanoscale manipulation of the structural properties, which is useful for refining the design and preparation of the bimetallic catalysts. The insight gained from probing how nanoparticle-nanoparticle and nanoparticle-substrate interactions relate to the size evolution in the activation process of nanoparticles on planar substrates serves as an important guiding principle in the control of nanoparticle sintering on different

  17. EXAFS characterization of supported metal catalysts in chemically dynamic environments

    International Nuclear Information System (INIS)

    Robota, H.J.

    1991-01-01

    Characterization of catalysts focuses on the identification of an active site responsible for accelerating desirable chemical reactions. The identification, characterization, and selective modification of such sites is fundamental to the development of structure-function relationships. Unfortunately, this goal is far from realized in nearly all catalysts, and particularly in catalysts comprised of small supported metal particles. X-ray absorption spectroscopy (XAS) has had a dramatic effect on our understanding of supported metal particles in their resting state. However, the performance of a catalyst can not be assessed from such simple resting state measurements. Among the factors which influence catalyst performance are the exact catalyst composition, including the support and any modifiers; particle size; catalyst finishing and pretreatment conditions; pressure, composition, and temperature of the operating environment; time. Gaining an understanding of how the structure of a catalytic site can change with such an array of variables requires that we begin to develop measurement methods which are effective under chemically dynamic conditions. Ideally, it should be possible to obtain a full X-ray absorption spectrum of each element thought to have a causal relationship with observed catalyst properties. From these spectra, we can optimally extract only a relatively limited amount of information which we must then piece together with information derived from other characterization methods and intuition to arrive at a hypothetical structure of the operating catalyst. Information about crystallinity, homogeneity, and general disorder can be obtained from the Debye-Waller factor. Finally, through analogy with known compounds, the electronic structure of the active atoms can be inferred from near edge absorption features

  18. Titanium Dioxide as a Catalyst Support in Heterogeneous Catalysis

    Science.gov (United States)

    Bagheri, Samira; Muhd Julkapli, Nurhidayatullaili; Bee Abd Hamid, Sharifah

    2014-01-01

    The lack of stability is a challenge for most heterogeneous catalysts. During operations, the agglomeration of particles may block the active sites of the catalyst, which is believed to contribute to its instability. Recently, titanium oxide (TiO2) was introduced as an alternative support material for heterogeneous catalyst due to the effect of its high surface area stabilizing the catalysts in its mesoporous structure. TiO2 supported metal catalysts have attracted interest due to TiO2 nanoparticles high activity for various reduction and oxidation reactions at low pressures and temperatures. Furthermore, TiO2 was found to be a good metal oxide catalyst support due to the strong metal support interaction, chemical stability, and acid-base property. The aforementioned properties make heterogeneous TiO2 supported catalysts show a high potential in photocatalyst-related applications, electrodes for wet solar cells, synthesis of fine chemicals, and others. This review focuses on TiO2 as a support material for heterogeneous catalysts and its potential applications. PMID:25383380

  19. Titanium Dioxide as a Catalyst Support in Heterogeneous Catalysis

    Directory of Open Access Journals (Sweden)

    Samira Bagheri

    2014-01-01

    Full Text Available The lack of stability is a challenge for most heterogeneous catalysts. During operations, the agglomeration of particles may block the active sites of the catalyst, which is believed to contribute to its instability. Recently, titanium oxide (TiO2 was introduced as an alternative support material for heterogeneous catalyst due to the effect of its high surface area stabilizing the catalysts in its mesoporous structure. TiO2 supported metal catalysts have attracted interest due to TiO2 nanoparticles high activity for various reduction and oxidation reactions at low pressures and temperatures. Furthermore, TiO2 was found to be a good metal oxide catalyst support due to the strong metal support interaction, chemical stability, and acid-base property. The aforementioned properties make heterogeneous TiO2 supported catalysts show a high potential in photocatalyst-related applications, electrodes for wet solar cells, synthesis of fine chemicals, and others. This review focuses on TiO2 as a support material for heterogeneous catalysts and its potential applications.

  20. Perlite-SO3H nanoparticles as an efficient and reusable catalyst for one-pot three-component synthesis of 1,2-dihydro-1-aryl-naphtho[1,2-e][1,3]oxazine-3-one derivatives under both microwave-assisted and thermal solvent-free conditions: Single crystal X-ray structure analysis and theoretical study

    Directory of Open Access Journals (Sweden)

    Ali Ramazani

    2016-01-01

    Full Text Available A general synthetic route for the synthesis of 1,2-dihydro-1-aryl-naphtho[1,2-e][1,3]oxazine-3-one derivatives has been developed using perlite-SO3H nanoparticles as efficient catalyst under both microwave-assisted and thermal solvent-free conditions. The combination of 2-naphthol, aldehyde and urea enabled the synthesis of 1,2-dihydro-1-aryl-naphtho[1,2-e][1,3]oxazine-3-one derivatives in the presence of perlite-SO3H nanoparticles in good to excellent yields. This method provides several advantages like simple work-up, environmentally benign, and shorter reaction times along with high yields. In order to explore the recyclability of the catalyst, the perlite-SO3H nanoparticles in solvent-free conditions were used as catalyst for the same reaction repeatedly and the change in their catalytic activity was studied. It was found that perlite-SO3H nanoparticles could be reused for four cycles with negligible loss of their activity. Single crystal X-ray structure analysis and theoretical studies also were investigated for 4i product. The electronic properties of the compound have been analyzed using DFT calculations (B3LYP/6-311+G*. The FMO analysis suggests that charge transfer takes place within the molecule and the HOMO is localized mainly on naphthalene and oxazinone rings whereas the LUMO resides on the naphthalene ring.

  1. Catalyst component interactions in nickel/alumina catalyst

    Directory of Open Access Journals (Sweden)

    Kiš Erne E.

    2007-01-01

    Full Text Available The influence of nickel loading (5; 10; 20 wt% Ni, temperature of heat treatment (400; 700; 1100°C and way of catalyst preparation on the catalyst component interactions (CCI in the impregnated, mechanical powder mixed and co-precipitated catalyst was investigated. For sample characterization, low temperature nitrogen adsorption (LTNA and X-ray diffraction (XRD were applied. Significant differences were revealed, concerning CCI in dependence of nickel loading, temperature of heat treatment and way of catalyst preparation. The obtained results show that the support metal oxide interactions (SMI in impregnated and co-precipitated catalysts are more intensive than in the mechanical powder mixed catalyst. The degree and intensity of CCI is expressed by the ratio of real and theoretical surface area of the catalyst. This ratio can be used for a quantitative estimation of CCI and it is generally applicable to all types of heterogeneous catalysts.

  2. Isobutane alkylation over solid catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kozorezov, Y.I.; Lisin, V.I.

    1979-05-01

    Commercial alumina modified with 6Vertical Bar3< by wt boron trifluoride was active in isobutane alkylation with ethylene in a flow reactor at 5:1 isobutane-ethylene and 5-20 min reaction time. The reaction rate was first-order in ethylene and increased with increasing temperature (20/sup 0/-80/sup 0/C) and ethylene pressure (0.2-3 atm). The calculated activation energy was 8.4 kj. Kinetic data and the activity of tert.-butyl chloride, but not ethyl chloride as alkylating agents in place of ethylene suggested a carbonium-ion chain mechanism involving both surface and gas-phase reactions. The ethylene-based yield of the alkylate decreased from 132 to 41Vertical Bar3< by wt after nine hours on stream, and its bromine number increased from 0.2 to 1 g Br/sub 2//100 ml. This inhibition was attributed to adsorption on the active acidic sites of the reaction products, particularly C/sub 10//sup +/ olefins. Catalyst stabilization could probably be achieved by selecting an appropriate solvent that would continuously desorb the inhibiting products from the catalyst surface.

  3. The effect of driving force on intramolecular electron transfer in proteins. Studies on single-site mutated azurins

    DEFF Research Database (Denmark)

    Farver, O; Skov, L K; van de Kamp, M

    1992-01-01

    these substitutions are not in the microenvironment separating the electron donor and acceptor, they were expected to affect the LRET rate because of their effect on the redox potential of the copper site and thus on the driving force of the reaction, as well as on the reorganization energies of the copper site....... The rate of intramolecular electron transfer from RSSR- to Cu(II) in the wild-type P. aeruginosa azurin (delta G degrees = -68.9 kJ/mol) has previously been determined to be 44 +/- 7 s-1 at 298 K, pH 7.0. The [M44K]azurin mutant (delta G degrees = -75.3 kJ/mol) was now found to react considerably faster (k...... = 134 +/- 12 s-1 at 298 K, pH 7.0) while the [H35Q]azurin mutant (delta G degrees = -65.4 kJ/mol) exhibits, within experimental error, the same specific rate (k = 52 +/- 11 s-1, 298 K, pH 7.0) as that of the wild-type azurin. From the temperature dependence of these LRET rates the following activation...

  4. Supported organoiridium catalysts for alkane dehydrogenation

    Science.gov (United States)

    Baker, R. Thomas; Sattelberger, Alfred P.; Li, Hongbo

    2013-09-03

    Solid supported organoiridium catalysts, a process for preparing such solid supported organoiridium catalysts, and the use of such solid supported organoiridium catalysts in dehydrogenation reactions of alkanes is provided. The catalysts can be easily recovered and recycled.

  5. Investigation of heterogeneous solid acid catalyst performance on low grade feedstocks for biodiesel production: A review

    International Nuclear Information System (INIS)

    Mansir, Nasar; Taufiq-Yap, Yun Hin; Rashid, Umer; Lokman, Ibrahim M.

    2017-01-01

    Highlights: • Solid acid catalysts are proficient to esterifying high free fatty acid feedstocks to biodiesel. • Heterogeneous catalysts have the advantage of easy separation and reusability. • Heterogeneous basic catalysts have limitations due to high FFA of low cost feedstocks. • Solid catalysts having acid and base sites reveal better catalyst for biodiesel production. - Abstract: The conventional fossil fuel reserves are continually declining worldwide and therefore posing greater challenges to the future of the energy sources. Biofuel alternatives were found promising to replace the diminishing fossil fuels. However, conversion of edible vegetable oils to biodiesel using homogeneous acids and base catalysts is now considered as indefensible for the future particularly due to food versus fuel competition and other environmental problems related to catalyst system and feedstock. This review has discussed the progression in research and growth related to heterogeneous catalysts used for biodiesel production for low grade feedstocks. The heterogeneous base catalysts have revealed effective way to produce biodiesel, but it has the limitation of being sensitive to high free fatty acid (FFA) or low grade feedstocks. Alternatively, solid acid catalysts are capable of converting the low grade feedstocks to biodiesel in the presence of active acid sites. The paper presents a comprehensive review towards the investigation of solid acid catalyst performance on low grade feedstock, their category, properties, advantages, limitations and possible remedy to their drawbacks for biodiesel production.

  6. Catalyst, method of making, and reactions using the catalyst

    Science.gov (United States)

    Tonkovich, Anna Lee Y [Pasco, WA; Wang, Yong [Richland, WA; Gao, Yufei [Kennewick, WA

    2002-08-27

    The present invention includes a catalyst having a layered structure with, (1) a porous support, (2) a buffer layer, (3) an interfacial layer, and optionally (4) a catalyst layer. The invention also provides a process in which a reactant is converted to a product by passing through a reaction chamber containing the catalyst.

  7. 1.55 µm emission from a single III-nitride top-down and site-controlled nanowire quantum disk

    Science.gov (United States)

    Chen, Qiming; Yan, Changling; Qu, Yi

    2017-07-01

    InN/InGaN single quantum well (SQW) was fabricated on 100 nm GaN buffer layer which was deposited on GaN template by plasma assisted molecular beam epitaxy (PA-MBE). The In composition and the surface morphology were measured by x-ray diffusion (XRD) and atom force microscope (AFM), respectively. Afterwards, the sample was fabricated into site-controlled nanowires arrays by hot-embossing nano-imprint lithography (HE-NIL) and ultraviolet nanoimprint lithography (UV-NIL). The nanowires were uniform along the c-axis and aligned periodically as presented by scanning electron microscope (SEM). The single nanowire showed disk-in-a-wire structure by high angle annular dark field (HAADF) and an In-rich or Ga deficient region was observed by energy dispersive x-ray spectrum (EDXS). The optical properties of the SQW film and single nanowire were measured using micro photoluminescence (µ-PL) spectroscopy. The stimulating light wavelength was 632.8 nm which was emitted from a He-Ne laser and the detector was a liquid nitrogen cooled InGaAs detector. A blue peak shift from the film material to the nanowire was observed. This was due to the quantum confinement Stark Effect. More importantly, the 1.55 µm emission was given from the single disk-in-a-wire structure at room temperature. We believe the arrays of such nanowires may be useful for quantum communication in the future.

  8. Highly durable and active non-precious air cathode catalyst for zinc air battery

    Science.gov (United States)

    Chen, Zhu; Choi, Ja-Yeon; Wang, Haijiang; Li, Hui; Chen, Zhongwei

    The electrochemical stability of non-precious FeCo-EDA and commercial Pt/C cathode catalysts for zinc air battery have been compared using accelerated degradation test (ADT) in alkaline condition. Outstanding oxygen reduction reaction (ORR) stability of the FeCo-EDA catalyst was observed compared with the commercial Pt/C catalyst. The FeCo-EDA catalyst retained 80% of the initial mass activity for ORR whereas the commercial Pt/C catalyst retained only 32% of the initial mass activity after ADT. Additionally, the FeCo-EDA catalyst exhibited a nearly three times higher mass activity compared to that of the commercial Pt/C catalyst after ADT. Furthermore, single cell test of the FeCo-EDA and Pt/C catalysts was performed where both catalysts exhibited pseudolinear behaviour in the 12-500 mA cm -2 range. In addition, 67% higher peak power density was observed from the FeCo-EDA catalyst compared with commercial Pt/C. Based on the half cell and single cell tests the non-precious FeCo-EDA catalyst is a very promising ORR electrocatalyst for zinc air battery.

  9. Single-nucleotide polymorphism-based population genetic analysis of Mycobacterium tuberculosis strains from 4 geographic sites.

    Science.gov (United States)

    Gutacker, Michaela M; Mathema, Barun; Soini, Hanna; Shashkina, Elena; Kreiswirth, Barry N; Graviss, Edward A; Musser, James M

    2006-01-01

    We studied genetic relationships among 5069 Mycobacterium tuberculosis strains recovered from patients enrolled in 4 population-based studies in the United States and Europe, by analysis of 36 synonymous single-nucleotide polymorphisms (SNPs). All strains were assigned to 1 of 9 major genetic clusters based on sSNP profile. The same 9 genetic clusters were revealed by analysis of 227 nonsynonymous SNPs, 121 intergenic SNPs, and concatenated profiles of 578 SNPs available for a subset of 48 representative strains. IS6110 profiles, spoligotypes, and mycobacterial interspersed repetitive unit patterns were nonrandomly associated with SNP-based phylogenetic lineages, together indicating a strongly clonal population structure. Isolates of the 9 genetic clusters were not distributed with equal frequency in all localities, reflecting geographic subdivision. The SNP-based phylogenetic framework provides new insight into the worldwide evolution of M. tuberculosis and a gateway for investigating genotype-disease phenotype relationships in large samples of strains.

  10. Effect of connective tissue grafting on peri-implant tissue in single immediate implant sites: A RCT.

    Science.gov (United States)

    Zuiderveld, Elise G; Meijer, Henny J A; den Hartog, Laurens; Vissink, Arjan; Raghoebar, Gerry M

    2018-02-01

    To assess the effect of connective tissue grafting on the mid-buccal mucosal level (MBML) of immediately placed and provisionalized single implants in the maxillofacial aesthetic zone. Sixty patients with a failing tooth were provided with an immediately placed and provisionalized implant. During implant placement, patients randomly received either a connective tissue graft from the maxillary tuberosity (n = 30, test group) or no graft (n = 30, control group). Follow-up visits were at one (T 1 ) and twelve months (T 12 ) after final crown placement. The primary outcome measure was any change in MBML compared to the pre-operative situation. In addition, gingival biotype, aesthetics (using the Pink Esthetic Score-White Esthetic Score), marginal bone level, soft tissue peri-implant parameters and patient satisfaction were assessed. The mean MBML change at T 12 was -0.5 ± 1.1 mm in the control group and 0.1 ± 0.8 mm in the test group (p = .03). No significant differences regarding other outcome variables were observed, neither was gingival biotype associated with a gain or loss in MBML. This one-year study shows that connective tissue grafting in single, immediately placed and provisionalized implants leads to less recession of the peri-implant soft tissue at the mid-buccal aspect, irrespective of the gingival biotype (www.trialregister.nl: TC3815). © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. Fuel cell catalyst degradation

    DEFF Research Database (Denmark)

    Arenz, Matthias; Zana, Alessandro

    2016-01-01

    Fuel cells are an important piece in our quest for a sustainable energy supply. Although there are several different types of fuel cells, the by far most popular is the proton exchange membrane fuel cell (PEMFC). Among its many favorable properties are a short start up time and a high power density...... increasing focus. Activity of the catalyst is important, but stability is essential. In the presented perspective paper, we review recent efforts to investigate fuel cell catalysts ex-situ in electrochemical half-cell measurements. Due to the amount of different studies, this review has no intention to give...

  12. Olefin metathesis catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Kukes, S.G.; Banks, R.L.

    1986-05-20

    A process is described for preparing a disproportionation catalyst comprising admixing a catalytically effective amount of a calcined and activated catalyst consisting essentially of at least one metal oxide selected from molybdenum oxide and tungsten oxide and a support containing a major proportion of silica or alumina with a promoting amount of a methylating agent selected from the group consisting of dimethyl sulfate, dimethylsulfoxide, trimethyloxonium tetrafluorborate, methyl iodide, and methyl bromide, and subjecting same to inert atmospheric conditions for the methylating agent to promote the activity of the calcined molybdenum and tungsten oxides for the disproportionation of olefins.

  13. Design of a surface alloy catalyst for steam reforming

    DEFF Research Database (Denmark)

    Besenbacher, F.; Chorkendorff, Ib; Clausen, B.S.

    1998-01-01

    Detailed studies of elementary chemical processes on well-characterized single crystal surfaces have contributed substantially to the understanding of heterogeneous catalysis. insight into the structure of surface alloys combined with an understanding of the relation between the surface compositi...... and reactivity is shown to lead directly to new ideas for catalyst design, The feasibility of such an approach is illustrated by the synthesis, characterization, and tests of a high-surface area gold-nickel catalyst for steam reforming....

  14. Effect of catalyst pretreatment on the olefin metathesis catalyzed by alumina-supported (9%) rhenium oxide

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, J.C.

    1979-01-01

    A kinetic model was developed to express the time-on-stream profile of the activity during catalyst break-in and deactivation. The catalyst surface is in geometric and energetic heterogeneity. Partial catalyst reduction is a prerequisite step for olefin metathesis. The metathesis activity may be affected by the coordination number and the type of ligands associated with the sites on the catalyst. The deactivation is proposed due to deposition of residues on the active sites, and to sintering, etc. A dispersion pretreatment increased activity. Oxygen is an activator. The hydrogen reduction at 500/sup 0/C causes partial but permanent loss of activity.

  15. Organometallic model complexes elucidate the active gallium species in alkane dehydrogenation catalysts based on ligand effects in Ga K-edge XANES

    Energy Technology Data Exchange (ETDEWEB)

    Getsoian, Andrew “Bean”; Das, Ujjal; Camacho-Bunquin, Jeffrey; Zhang, Guanghui; Gallagher, James R.; Hu, Bo; Cheah, Singfoong; Schaidle, Joshua A.; Ruddy, Daniel A.; Hensley, Jesse E.; Krause, Theodore R.; Curtiss, Larry A.; Miller, Jeffrey T.; Hock, Adam S.

    2016-01-01

    Gallium-modified zeolites are known catalysts for the dehydrogenation of alkanes, reactivity that finds industrial application in the aromatization of light alkanes by Ga-ZSM5. While the role of gallium cations in alkane activation is well known, the oxidation state and coordination environment of gallium under reaction conditions has been the subject of debate. Edge shifts in Ga K-edge XANES spectra acquired under reaction conditions have long been interpreted as evidence for reduction of Ga(III) to Ga(I). However, a change in oxidation state is not the only factor that can give rise to a change in the XANES spectrum. In order to better understand the XANES spectra of working catalysts, we have synthesized a series of molecular model compounds and grafted surface organometallic Ga species and compared their XANES spectra to those of gallium-based catalysts acquired under reducing conditions. We demonstrate that changes in the identity and number of gallium nearest neighbors can give rise to changes in XANES spectra similar to those attributed in literature to changes in oxidation state. Specifically, spectral features previously attributed to Ga(I) may be equally well interpreted as evidence for low-coordinate Ga(III) alkyl or hydride species. These findings apply both to gallium-impregnated zeolite catalysts and to silica-supported single site gallium catalysts, the latter of which is found to be active and selective for dehydrogenation of propane and hydrogenation of propylene.

  16. Single-Tooth Morse Taper Connection Implant Placed in Grafted Site of the Anterior Maxilla: Clinical and Radiographic Evaluation

    Directory of Open Access Journals (Sweden)

    Francesco Guido Mangano

    2014-01-01

    Full Text Available The aim of this study was to achieve aesthetically pleasing soft tissue contours in a severely compromised tooth in the anterior region of the maxilla. For a right-maxillary central incisor with localized advanced chronic periodontitis a tooth extraction followed by reconstructive procedures and delayed implant placement was proposed and accepted by the patient. Guided bone regeneration (GBR technique was employed, with a biphasic calcium-phosphate (BCP block graft placed in the extraction socket in conjunction with granules of the same material and a resorbable barrier membrane. After 6 months of healing, an implant was installed. The acrylic provisional restoration remained in situ for 3 months and then was substituted with the definitive crown. This ridge reconstruction technique enabled preserving both hard and soft tissues and counteracting vertical and horizontal bone resorption after tooth extraction and allowed for an ideal three-dimensional implant placement. Localized severe alveolar bone resorption of the anterior maxilla associated with chronic periodontal disease can be successfully treated by means of ridge reconstruction with GBR and delayed implant insertion; the placement of an early-loaded, Morse taper connection implant in the grafted site was effective to create an excellent clinical aesthetic result and to maintain it along time.

  17. Groundwater quality assessment plan for single-shell tank waste management Area U at the Hanford Site

    International Nuclear Information System (INIS)

    FN Hodges; CJ Chou

    2000-01-01

    Waste Management Area U (WMA U) includes the U Tank Farm, is currently regulated under RCRA interim-status regulations, and is scheduled for closure probably post-2030. Groundwater monitoring has been under an evaluation program that compared general contaminant indicator parameters from downgradient wells to background values established from upgradient wells. One of the indicator parameters, specific conductance, exceeded its background value in one downgradient well triggering a change from detection monitoring to a groundwater quality assessment program. The objective of the first phase of this assessment program is to determine whether the increased concentrations of nitrate and chromium in groundwater are from WMA U or from an upgradient source. Based on the results of the first determination, if WMA U is not the source of contamination, then the site will revert to detection monitoring. If WMA U is the source, then a second part of the groundwater quality assessment plan will be prepared to define the rate and extent of migration of contaminants in the groundwater and their concentrations

  18. On-site detection of Phytophthora spp.—single-stranded target DNA as the limiting factor to improve on-chip hybridization

    International Nuclear Information System (INIS)

    Schwenkbier, Lydia; Pollok, Sibyll; Popp, Jürgen; Weber, Karina; König, Stephan; Wagner, Stefan; Werres, Sabine; Weber, Jörg; Hentschel, Martin

    2014-01-01

    We report on a lab-on-a-chip approach for on-site detection of Phytophthora species that allows visual signal readout. The results demonstrate the significance of single-stranded DNA (ssDNA) generation in terms of improving the intensity of the hybridization signal and to improve the reliability of the method. Conventional PCR with subsequent heat denaturation, sodium hydroxide-based denaturation, lambda exonuclease digestion and two asymmetric PCR methods were investigated for the species P. fragariae, P. kernoviae, and P. ramorum. The positioning of the capture probe within the amplified yeast GTP-binding protein (YPT1) target DNA was also of interest because it significantly influences the intensity of the signal. Statistical tests were used to validate the impact of the ssDNA generation methods and the capture-target probe position. The single-stranded target DNA generated by Linear-After-The-Exponential PCR (LATE-PCR) was found to produce signal intensities comparable to post-PCR exonuclease treatment. The LATE-PCR is the best method for the on-site detection of Phytophthora because the enzymatic digestion after PCR is more laborious and time-consuming. (author)

  19. Enhancing catalytic activity of a hybrid xylanase through single substitution of Leu to Pro near the active site.

    Science.gov (United States)

    Wang, Qian; Zhao, Li-Li; Sun, Jian-Yi; Liu, Jian-Xin; Weng, Xiao-Yan

    2012-03-01

    A modified error-prone PCR and high-throughout screening system based on 96-well plate were employed to improve catalytic activity of a hybrid xylanase (ATx). The mutant (FSI-A124) with enhanced activity was further heterologously expressed in Pichia pastoris under the control of GAP promoter. The recombinant xylanase driven by the Saccharomyces cerevisiae α-mating factor was secreted into culture medium. After growth in YPD medium for 96 h, xylanase activity in the culture supernatant reached 66.1 U ml(-1), which was 2.92 times as that of its parent. 6 × His-tagged purification increased the specific activity to 1557.61 U mg(-1). The optimum temperature and pH of recombinant xylanase were 55°C and 6.0, respectively. A single amino acid substitution (L49P) was observed within sequence of the mutant. Insight of the three dimensional structure revealed that proline possibly produced weaker hydrogen bond, van der Waals force and hydrophobic interaction with other residues nearby than leucine, especially for V174, contributing to the flexibility of catalytic residue E177. In this study, FSI-A124 exhibited higher xylanase activity but poorer thermostability than its parent, indicating that activity and stability might be negatively correlated.

  20. Catalyst Activity Comparison of Alcohols over Zeolites

    Energy Technology Data Exchange (ETDEWEB)

    Ramasamy, Karthikeyan K.; Wang, Yong

    2013-01-01

    Alcohol transformation to transportation fuel range hydrocarbon on HZSM-5 (SiO2 / Al2O3 = 30) catalyst was studied at 360oC and 300psig. Product distributions and catalyst life were compared using methanol, ethanol, 1-propanol or 1-butanol as a feed. The catalyst life for 1-propanol and 1-butanol was more than double compared to that for methanol and ethanol. For all the alcohols studied, the product distributions (classified to paraffin, olefin, napthene, aromatic and naphthalene compounds) varied with time on stream (TOS). At 24 hours TOS, liquid product from 1-propanol and 1-butanol transformation primarily contains higher olefin compounds. The alcohol transformation process to higher hydrocarbon involves a complex set of reaction pathways such as dehydration, oligomerization, dehydrocyclization, and hydrogenation. Compared to ethylene generated from methanol and ethanol, oligomerization of propylene and butylene has a lower activation energy and can readily take place on weaker acidic sites. On the other hand, dehydrocyclization of propylene and butylene to form the cyclic compounds requires the sits with stronger acid strength. Combination of the above mentioned reasons are the primary reasons for olefin rich product generated in the later stage of the time on stream and for the extended catalyst life time for 1 propanol and 1 butanol compared to methanol and ethanol conversion over HZSM-5.