WorldWideScience

Sample records for single proportion sta281

  1. Single-chip mass flow controller with integrated Coriolis flow sensor and proportional control valve

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Alveringh, Dennis; Groen, Maarten; Wiegerink, Remco J.; Lötters, Joost Conrad

    2016-01-01

    We have designed, fabricated and tested the, to our knowledge, first ever single-chip mass flow controller with an integrated Coriolis mass flow sensor and a proportional control valve. A minimum internal volume is obtained, because the complete fluid path is integrated in a single chip. We

  2. Investigations of single-electron avalanches in a proportional drift tube

    International Nuclear Information System (INIS)

    Anderson, W.S.; Armitage, J.C.; Chevreau, P.; Heinrich, J.G.; Lu, C.; McDonald, I.; McDonald, K.T.; Miller, B.; Secrest, D.; Weckel, J.

    1990-01-01

    Detailed information on single-electron drift and avalanche behavior has a basic interest in an investigation of gas-chamber performance. Its timing, avalanche distribution, attachment by the working gas mixtures, etc., provide various criteria for choosing the best suitable gas mixture under a specific experimental circumstance. Investigations of single-electron avalanches in a proportional drift tube have been carried out with a pulsed N 2 laser. The study consists of two aspects: timing properties, and fluctuations in the gas avalanche

  3. Proportionality lost - proportionality regained?

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2010-01-01

    In recent years, the European Court of Justice (the ECJ) seems to have accepted restrictions on the freedom of establishment and other basic freedoms, despite the fact that a more thorough proportionality test would have revealed that the restriction in question did not pass the 'rule of reason....... This often cannot be done without thorough knowledge of the particular legal field in which the case is anchored, and the ECJ is often left to flounder somewhat on this, with the result that we are suddenly faced with the Court’s acceptance of a restriction. The difficulty often lies - not in recognising...... result if the proportionality argument had been based on adequate insight. Proportionality-weak decisions are in the article be categorised as: (1) Cases in which the ECJ allows itself to be “talked into” accepting a restriction, and for which the question of proportionality actually has been considered...

  4. Analysis of the Ballot Shuffling Attack on Irish ballot counting for Proportional Representation by Single Transferable Vote (PR-STV)

    DEFF Research Database (Denmark)

    Cochran, Dermot Robert

    2015-01-01

    The current Irish legislation for counting of ballots does not fully comply with the true meaning of proportional representation by single transferable vote. This is due to the way in which second and subsequent transfers are handled, the legislative requirement to only count the last set of ball...

  5. Proportional reasoning

    DEFF Research Database (Denmark)

    Dole, Shelley; Hilton, Annette; Hilton, Geoff

    2015-01-01

    Proportional reasoning is widely acknowledged as a key to success in school mathematics, yet students’ continual difficulties with proportion-related tasks are well documented. This paper draws on a large research study that aimed to support 4th to 9th grade teachers to design and implement tasks...

  6. Pharmacokinetics of single-dose sildenafil administered orally in clinically healthy dogs: Effect of feeding and dose proportionality.

    Science.gov (United States)

    Akabane, R; Sato, T; Sakatani, A; Miyagawa, Y; Tazaki, H; Takemura, N

    2018-01-19

    Basic information related to the pharmacokinetics of sildenafil in dogs is scarce. This study aimed to describe the pharmacokinetic properties of oral sildenafil and determine the effect of feeding and dose proportionality. The effect of feeding on pharmacokinetics of sildenafil (1 mg/kg) was investigated using a crossover study with six dogs. In addition, the dose proportionality of sildenafil ranging 1-4 mg/kg was evaluated using five dogs in the fasted states. The plasma concentrations of sildenafil were determined using high-performance liquid chromatography, and pharmacokinetic parameters were calculated using a noncompartmental analysis. Sildenafil administrations were well tolerated in all studies. Feeding reduced the area under the curve extrapolated to infinity (AUC inf ) and the maximum plasma concentration (C max ) significantly. The elimination half-life (T 1/2 ) did not differ between the fasted and the fed states. For dose proportionality, nonproportional increases in AUC inf and C max at 1-4 mg/kg doses were detected by a power model analysis. © 2018 John Wiley & Sons Ltd.

  7. Gradual variation of distance between electrodes as a novel method in design of single wire, position sensitive proportional counter

    International Nuclear Information System (INIS)

    Nasseri, M. M.; Tavassoli, A.; Zonobi, F.

    2009-01-01

    Position sensitive detectors are instruments that determine the position of the incident radiations. One type of these detectors is the gas flow proportional counter. Generally, position sensitive detector works in two different methods, so called charge division and rise time methods. In this paper, we explain our new method that is based on the gradual variation of the electrodes distance. Our results in this research show that the introduced method can be a good choice for determining the position of low energy radiations. In this counter, spatial resolution considered to be varying from 0.1 to 1mm along 15 centimeter of the active length.

  8. Effect of increasing proportions of lignocellulosic cosubstrate on the single-phase and two-phase digestion of readily biodegradable substrate

    International Nuclear Information System (INIS)

    Ganesh, Rangaraj; Torrijos, Michel; Sousbie, Philippe; Lugardon, Aurelien; Steyer, Jean Philippe; Delgenes, Jean Philippe

    2015-01-01

    The influence of different proportions of lignocellulosic substrate (cow manure with straw, CM) on the single-phase (conventional reactor) and two-phase (acidification/methanation with solids and liquid recirculation) digestion of a readily biodegradable substrate (fruit and vegetable waste, FVW) was investigated in order to determine the optimum cosubstrate ratio and the process best suited for codigestion. Both processes were fed initially with FVW, followed by FVW and CM at 80%:20% and 60%:40% (on volatile solids, VS basis) during an experiment run over eleven months. For the single-phase process, energy yield and VS destruction decreased by 11% and 9% with the 80%:20% FVW and CM ratio and by 16% and 17% with the 60%:40% feed ratio when compared to 100% FVW feed. For the two-phase process, energy yield and VS destruction decreased by 21% and 14% with 80%:20% feed ratio and by 48% and 33% with 60%:40% feed ratio compared to 100% FVW. Substrate solubilization in the acidification reactor was very efficient for all the feed proportions but it resulted in compounds other than volatile fatty acid (non-VFA COD) which were not easily amenable to methane generation. This led to a lower energy yield per kg of VS fed in the two-phase process compared to the single-phase process for the respective waste combination. For single-phase digestion, both 80%:20% and 60%:40% ratios were effective co-substrate combinations due to their higher energy yield. The two-phase process can be used for these ratios if higher VS reduction and a higher loading rate are the objectives. - Highlights: • Effect of cow manure addition on the digestion of fruit and vegetable waste studied. • Single and two-phase processes were compared for three different waste ratios. • Methane and energy yields were higher by single-phase than the two-phase process. • FVW-Cow manure ratios of 80%:20% and 60%:40% found effective for single-phase digestion. • Two-phase process resulted in higher solids

  9. Single-dose and multiple-dose pharmacokinetics and dose proportionality of intravenous and intramuscular HPβCD-diclofenac (Dyloject) compared with other diclofenac formulations.

    Science.gov (United States)

    Mermelstein, Fred; Hamilton, Douglas A; Wright, Curtis; Lacouture, Peter G; Ramaiya, Atulkumar; Carr, Daniel B

    2013-10-01

    To evaluate single- and repeated-dose pharmacokinetics (PK) and dose proportionality of hydroxypropyl-β-cyclodextrin (HPβCD)-diclofenac compared with Voltarol after intravenous (IV) and intramuscular (IM) administration. Study 1: Single-dose randomized four-way crossover study. Study 2: Multiple-dose randomized three-way crossover study. Clinical research center. Healthy adult volunteers. Study 1: Subjects received HPβCD-diclofenac and Voltarol, IV and IM, with a 5-day washout between treatment periods. Study 2: Subjects received two doses of IV HPβCD-diclofenac and oral Cataflam once every 6 hours for four doses with a 48-hour washout period between treatment periods. Study 1: IV HPβCD-diclofenac had a higher peak plasma concentration (Cmax ) and earlier time to reach maximum plasma concentration (Tmax ), but equivalent plasma exposure (area under the curve from time zero to t [AUC0-t ]) to IV Voltarol. The geometric mean ratio of HPβCD-diclofenac (IV) to Voltarol (IV) for AUC0-t was 106.27%. The geometric mean ratio of HPβCD-diclofenac (IM) to Voltarol (IM) for AUC0-t was 110.91%. The geometric mean ratio of HPβCD-diclofenac (IV) to HPβCD-diclofenac (IM) for AUC0-t was 101.25%. The geometric mean ratio of HPβCD-diclofenac (IM) to Voltarol (IV) for AUC0-t was 104.96%. Study 2: Cmax for diclofenac was 2904 and 6031 ng/ml after the first IV dose of 18.75 and 37.5 mg HPβCD-diclofenac, respectively, and was 3090 and 5617 ng/ml after the fourth dose, indicating no accumulation. Plasma exposures to 18.75 mg (866 ng·hour/ml) and 37.5 mg (1843 ng·hour/ml) IV HPβCD-diclofenac bracketed that of oral Cataflam 50 mg (1473 ng·hour/ml). Study 1: Bioavailability in terms of AUC after IV administration was equivalent for HPβCD-diclofenac compared with Voltarol and after IM administration of HPβCD-diclofenac and Voltarol. Bioavailability in terms of AUC after IM administration of HPβCD-diclofenac was equivalent to IV administration of HP

  10. A single-dose, open-label, parallel, randomized, dose-proportionality study of paliperidone after intramuscular injections of paliperidone palmitate in the deltoid or gluteal muscle in patients with schizophrenia.

    Science.gov (United States)

    Cleton, Adriaan; Rossenu, Stefaan; Crauwels, Herta; Berwaerts, Joris; Hough, David; Gopal, Srihari; Eerdekens, Marielle; Vandebosch, An; Remmerie, Bart; De Meulder, Marc; Rosso, Clara M

    2014-09-01

    Paliperidone palmitate (PP) is a long-acting injectable (LAI) antipsychotic, developed for monthly intramuscular (i.m.) administration into deltoid/gluteal muscle, approved for the treatment of schizophrenia in many countries. To assess the options for i.m. injection sites, dose-proportionality of PP was investigated after injection of a single dose (25-150 mg eq.) of PP in either gluteal (n = 106) or deltoid (n = 95) muscle of schizophrenic patients. Overall, mean (geometric) area under plasma concentration-time curve from time zero to infinity (AUC∞ ) of paliperidone increased proportionally with increasing PP doses, regardless of injection site. Mean maximum plasma concentration (Cmax ) was slightly less than dose-proportional for both injection sites at PP doses >50 mg eq. Mean Cmax was higher after injection in the deltoid compared with the gluteal muscle, except for the 100 mg eq. dose, while AUC∞ for both injection sites was comparable at all doses. Median time to reach Cmax (tmax ) ranged from 13-14 days after deltoid and 13-17 days after gluteal injection across all doses. Single PP injections in deltoid and gluteal muscles in the dose range of 25-150 mg eq. were generally tolerable both locally and systemically. © 2014, The American College of Clinical Pharmacology.

  11. The Principle of Proportionality

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Meisner Nielsen, Kasper

    2005-01-01

    Recent policy initiatives within the harmonization of European company laws have promoted a so-called "principle of proportionality" through proposals that regulate mechanisms opposing a proportional distribution of ownership and control. We scrutinize the foundation for these initiatives...... in relationship to the process of harmonization of the European capital markets.JEL classifications: G30, G32, G34 and G38Keywords: Ownership Structure, Dual Class Shares, Pyramids, EU companylaws....

  12. Gas proportional scintillation counter

    International Nuclear Information System (INIS)

    Iguchi, Tetsuo; Nakazawa, Masaharu; Sekiguchi, Akira

    1980-01-01

    As the trial in the first stage of utilizing recoil helium for the measurement of 2 - 14 MeV neutron spectra in the simulated blanket for a nuclear fusion reactor, the He-Xe system gas proportional scintillation counter (GPSC) has been manufactured for trial, giving consideration to the advantages of gas scintillators and further to improve the energy resolution. In GPSC, delayed secondary scintillation pulses are produced, and its amplitude gives the energy resolution the adverse effect. Thus, in order to improve the energy resolution, it is desirable to realize such geometry of proportional counters that the electric field in the vicinity of center wire is sufficiently intense to induce the secondary excitation or ionization. The counters of such construction are called GPSC, in which the actual energy resolution can be improved according to the secondary scintillation pulses without losing the fast primary scintillation pulses useful for fast coincidence technique. The experimental results and the consideration on them are described. As compared with proportional counters, GPSC can give large output pulses even at low voltage, improve the energy resolution greatly as compared with ordinary gas scintillators, and measure the time data by the primary scintillation and the energy data based on the secondary scintillation simultaneously. However, it is likely to be affected by gas impurities more than proportional counters, and inferior in the reproducibility and stability of measurement. (Wakatsuki, Y.)

  13. Orthotopic AY-27 rat bladder urothelial cell carcinoma model presented an elevated methemoglobin proportion in the increased total hemoglobin content when evaluated in vivo by single-fiber reflectance spectroscopy

    Science.gov (United States)

    Sun, Tengfei; Davis, Carole A.; Hurst, Robert E.; Slaton, Joel W.; Piao, Daqing

    2017-02-01

    In vivo single-fiber reflectance spectroscopy (SfRS) was performed on an orthotopic AY-27 rat bladder urothelial cell carcinoma model to explore potential spectroscopic features revealing neoplastic changes. AY-27 bladder tumor cells were intravesically instilled in four rats and allowed to implant and grow for one week, with two additional rats as the control. A total of 107 SfRS measurements were taken from 27 sites on two control bladders and 80 from four AY-27 treated bladders. The spectral profiles obtained from AY-27 treated bladders revealed various levels of a methemoglobin (MetHb) characteristic spectral feature around 635nm. A multisegment spectral analysis method estimated concentrations of five chromophore compositions including oxyhemoglobin, deoxyhemoglobin, MetHb, lipid and water. The total hemoglobin concentration ([HbT]), the MetHb proportion in the total hemoglobin and the lipid volume content showed possible correlations. The 80 measurements from the AY-27 treated bladders could separate to three sub-sets according to the MetHb proportion. Specifically, 72 were in subset 1 with low proportion (5.3%30%). When grouped according to [MetHB], the [HbT] increased from 368 μM of subset 1 to 488 μM of subset 2 to 541 μM of subset 3, in comparison to the 285 μM of the control. The increased total hemoglobin and the elevation of MetHb proportion may signify angiogenesis and degradation in hemoglobin oxygen-transport. Additionally, the lipid volume content decreased from 2.58% in the control to <0.2% in the tumor groups, indicating disruption of subepithelium tissue architecture.

  14. Disease proportions attributable to environment

    Directory of Open Access Journals (Sweden)

    Vineis Paolo

    2007-11-01

    Full Text Available Abstract Population disease proportions attributable to various causal agents are popular as they present a simplified view of the contribution of each agent to the disease load. However they are only summary figures that may be easily misinterpreted or over-interpreted even when the causal link between an exposure and an effect is well established. This commentary discusses several issues surrounding the estimation of attributable proportions, particularly with reference to environmental causes of cancers, and critically examines two recently published papers. These issues encompass potential biases as well as the very definition of environment and of environmental agent. The latter aspect is not just a semantic question but carries implications for the focus of preventive actions, whether centred on the material and social environment or on single individuals.

  15. The divine proportion

    CERN Document Server

    Huntley, H E

    1970-01-01

    Using simple mathematical formulas, most as basic as Pythagoras's theorem and requiring only a very limited knowledge of mathematics, Professor Huntley explores the fascinating relationship between geometry and aesthetics. Poetry, patterns like Pascal's triangle, philosophy, psychology, music, and dozens of simple mathematical figures are enlisted to show that the ""divine proportion"" or ""golden ratio"" is a feature of geometry and analysis which awakes answering echoes in the human psyche. When we judge a work of art aesthetically satisfying, according to his formulation, we are making it c

  16. Treatment versus proportionality

    DEFF Research Database (Denmark)

    Sorensen, David Woodrow Mattson

    2010-01-01

    . This critique, which hinges on proportionality, led to a change in the law on July 1, 2000, after which the length of treatment for non-serious-violent crimes was limited to a maximum of five years. This change was itself criticized by the Council of Medical Forensic Specialists, who argued that time of release...... persons sentenced before and after the July 1, 2000 change in the law. The analysis is based on 1510 persons serving 1554 sentences and utilizes data from the criminal register, the central psychiatric register, the cause of death register, and the population register. The data do not support...

  17. Restrictions and Proportionality

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2009-01-01

    The article discusses three central aspects of the freedoms under European Community law, namely 1) the prohibition against restrictions as an important extension of the prohibition against discrimination, 2) a prohibition against exit restrictions which is just as important as the prohibition...... against host country restrictions, but which is often not recognised to the same extent by national law, and 3) the importance of also identifying and recognising an exit restriction, so that it is possible to achieve the required test of appropriateness and proportionality in relation to the rule...

  18. Constant Proportion Portfolio Insurance

    DEFF Research Database (Denmark)

    Jessen, Cathrine

    2014-01-01

    Portfolio insurance, as practiced in 1987, consisted of trading between an underlying stock portfolio and cash, using option theory to place a floor on the value of the position, as if it included a protective put. Constant Proportion Portfolio Insurance (CPPI) is an option-free variation...... on the theme, originally proposed by Fischer Black. In CPPI, a financial institution guarantees a floor value for the “insured” portfolio and adjusts the stock/bond mix to produce a leveraged exposure to the risky assets, which depends on how far the portfolio value is above the floor. Plain-vanilla portfolio...... insurance largely died with the crash of 1987, but CPPI is still going strong. In the frictionless markets of finance theory, the issuer’s strategy to hedge its liability under the contract is clear, but in the real world with transactions costs and stochastic jump risk, the optimal strategy is less obvious...

  19. Pharmacokinetics of marbofloxacin in pigs after intravenous and intramuscular administration of a single dose of 8 mg/kg: dose proportionality, influence of the age of the animals and urinary elimination.

    Science.gov (United States)

    Schneider, M; Paulin, A; Dron, F; Woehrlé, F

    2014-12-01

    The pharmacokinetics of marbofloxacin in pigs were evaluated as a function of dose and animal age following intravenous and intramuscular administration of a 16% solution (Forcyl(®) ). The absolute bioavailability of marbofloxacin as well as the dose proportionality was evaluated in 27-week-old fattening pigs. Blood PK and urinary excretion of marbofloxacin were evaluated after a single intramuscular dose of 8 mg/kg in 16-week-old male pigs. An additional group of 12-week-old weaned piglets was used for the evaluation of age-related kinetics. The plasma and urine concentration of marbofloxacin was determined using a HPLC method. Pharmacokinetic parameters were calculated using noncompartmental methods. After intravenous administration in 27-week-old fattening pigs, the total body clearance was 0.065 L/h·kg. After intramuscular administration to the same animals, the mean observed Cmax was 6.30 μg/mL, and the AUCINF was 115 μg·h/mL. The absolute bioavailability was 91.5%, and dose proportionality was shown within the dose range of 4-16 mg/kg. The renal clearance was about half of the value of the total clearance. The total systemic clearance values significantly decreased as a function of age, being 0.092 L/h·kg and 0.079 L/h·kg in pigs aged 12 and 16 weeks, respectively. © 2014 The Authors. Journal of Veterinary Pharmacology and Therapeutics Published by John Wiley & Sons Ltd.

  20. Visual Manipulatives for Proportional Reasoning.

    Science.gov (United States)

    Moore, Joyce L.; Schwartz, Daniel L.

    The use of a visual representation in learning about proportional relations was studied, examining students' understandings of the invariance of a multiplicative relation on both sides of a proportion equation and the invariance of the structural relations that exist in different semantic types of proportion problems. Subjects were 49 high-ability…

  1. Introduction: Two Kinds of Proportion

    Directory of Open Access Journals (Sweden)

    Matthew A Cohen

    2014-06-01

    Full Text Available The subject of architectural proportional systems in the history of architecture, the topic of this special collection of essays in 'Architectural Histories', has long been characterized by a fundamental ambiguity: the word and concept of proportion simultaneously signify two unrelated and in some ways opposite meanings. Proportion can refer to ratios, or it can refer to architectural beauty. In this introduction to the papers that follow, Matthew A. Cohen proposes a simple clarification of this ambiguity as a framework for continued discussion of this subject: that whenever scholars use the word proportion, they specify whether they intend ‘proportion-as-ratio’ or ‘proportion-as-beauty’. The frequent blending of these meanings today, Cohen argues, is a survival of attitudes toward proportional systems in architecture that were prevalent as long ago as the early Renaissance. Cohen proposes an alternative to Rudolf Wittkower's paradigmatic ‘break-away’ theory of the history of proportional systems, according to which virtually everyone accepted proportional systems as sources of universal beauty in architecture until the mid-eighteenth century, and after that time virtually everyone believed that beauty and proportional systems were matters of individual preference. Rather than a long period respectful of tradition followed by a long period skeptical of it, Cohen argues, based in part on a new interpretation of Claude Perrault’s 1683 codification of the notion of positive beauty, that architects and others have always had access to two parallel strands of thought pertaining to proportional systems: a skeptical-pragmatic strand and a respectful-metaphysical strand. This new historical and historiographical interpretation of the problem of architectural proportional systems, and the new vocabulary with which to discuss it critically presented herein, helps to separate aesthetic from historical considerations.

  2. Proportioning of light weight concrete

    DEFF Research Database (Denmark)

    Palmus, Lars

    1996-01-01

    Development of a method to determine the proportions of the raw materials in light weight concrete made with leight expanded clay aggregate. The method is based on composite theory......Development of a method to determine the proportions of the raw materials in light weight concrete made with leight expanded clay aggregate. The method is based on composite theory...

  3. Proportional counter end effects eliminator

    International Nuclear Information System (INIS)

    Meekins, J.F.

    1976-01-01

    An improved gas-filled proportional counter which includes a resistor network connected between the anode and cathode at the ends of the counter in order to eliminate ''end effects'' is described. 3 Claims, 2 Drawing Figures

  4. Electronics for proportional drift tubes

    International Nuclear Information System (INIS)

    Fremont, G.; Friend, B.; Mess, K.H.; Schmidt-Parzefall, W.; Tarle, J.C.; Verweij, H.; CERN-Hamburg-Amsterdam-Rome-Moscow Collaboration); Geske, K.; Riege, H.; Schuett, J.; CERN-Hamburg-Amsterdam-Rome-Moscow Collaboration); Semenov, Y.; CERN-Hamburg-Amsterdam-Rome-Moscow Collaboration)

    1980-01-01

    An electronic system for the read-out of a large number of proportional drift tubes (16,000) has been designed. This system measures deposited charge and drift-time of the charge of a particle traversing a proportional drift tube. A second event can be accepted during the read-out of the system. Up to 40 typical events can be collected and buffered before a data transfer to a computer is necessary. (orig.)

  5. Analogical proportions: another logical view

    Science.gov (United States)

    Prade, Henri; Richard, Gilles

    This paper investigates the logical formalization of a restricted form of analogical reasoning based on analogical proportions, i.e. statements of the form a is to b as c is to d. Starting from a naive set theoretic interpretation, we highlight the existence of two noticeable companion proportions: one states that a is to b the converse of what c is to d (reverse analogy), while the other called paralogical proportion expresses that what a and b have in common, c and d have it also. We identify the characteristic postulates of the three types of proportions and examine their consequences from an abstract viewpoint. We further study the properties of the set theoretic interpretation and of the Boolean logic interpretation, and we provide another light on the understanding of the role of permutations in the modeling of the three types of proportions. Finally, we address the use of these proportions as a basis for inference in a propositional setting, and relate it to more general schemes of analogical reasoning. The differences between analogy, reverse-analogy, and paralogy is still emphasized in a three-valued setting, which is also briefly presented.

  6. Pulse triggering mechanism of air proportional counters

    International Nuclear Information System (INIS)

    Aoyama, T.; Mori, T.; Watanabe, T.

    1983-01-01

    This paper describes the pulse triggering mechanism of a cylindrical proportional counter filled with air at atmospheric pressure for the incidence of β-rays. Experimental results indicate that primary electrons created distantly from the anode wire by a β-ray are transformed into negative ions, which then detach electrons close to the anode wire and generate electron avalanches thus triggering pulses, while electrons created near the anode wire by a β-ray directly trigger a pulse. Since a negative ion pulse is triggered by a single electron detached from a negative ion, multiple pulses are generated by a large number of ions produced by the incidence of a single β-ray. It is therefore necessary not to count pulses triggered by negative ions but to count those by primary electrons alone when use is made of air proportional counters for the detection of β-rays. (orig.)

  7. Development of multiwire proportional chambers

    CERN Document Server

    Charpak, G

    1969-01-01

    It has happened quite often in the history of science that theoreticians, confronted with some major difficulty, have successfully gone back thirty years to look at ideas that had then been thrown overboard. But it is rare that experimentalists go back thirty years to look again at equipment which had become out-dated. This is what Charpak and his colleagues did to emerge with the 'multiwire proportional chamber' which has several new features making it a very useful addition to the armoury of particle detectors. In the 1930s, ion-chambers, Geiger- Muller counters and proportional counters, were vital pieces of equipment in nuclear physics research. Other types of detectors have since largely replaced them but now the proportional counter, in new array, is making a comeback.

  8. Bayesian Inference on Proportional Elections

    Science.gov (United States)

    Brunello, Gabriel Hideki Vatanabe; Nakano, Eduardo Yoshio

    2015-01-01

    Polls for majoritarian voting systems usually show estimates of the percentage of votes for each candidate. However, proportional vote systems do not necessarily guarantee the candidate with the most percentage of votes will be elected. Thus, traditional methods used in majoritarian elections cannot be applied on proportional elections. In this context, the purpose of this paper was to perform a Bayesian inference on proportional elections considering the Brazilian system of seats distribution. More specifically, a methodology to answer the probability that a given party will have representation on the chamber of deputies was developed. Inferences were made on a Bayesian scenario using the Monte Carlo simulation technique, and the developed methodology was applied on data from the Brazilian elections for Members of the Legislative Assembly and Federal Chamber of Deputies in 2010. A performance rate was also presented to evaluate the efficiency of the methodology. Calculations and simulations were carried out using the free R statistical software. PMID:25786259

  9. The escape gated proportional counter

    International Nuclear Information System (INIS)

    Bibbo, G.; Sanford, P.W.

    1981-01-01

    Proportional counters, designed to detect hard X-rays, are generally filled with Xe or Kr or a mixture of Xe and Kr. In a large multichamber proportional counter the K-fluorescent radiation of these gases, which escapes the cell of origin, but is absorbed in other cells of the counter, provides an additional signal. A coincidence technique, which makes use of this signal to reduce the charged particle background and to correct the energy spectrum for the escape peak, has been evaluated. The detector has an improved energy resolution over that of the conventional proportional counter and preliminary results indicate that a reduction in the background by a factor of about 1000 can be obtained. Its combined properties of very efficient background reduction and improved energy resolution make this type of instrument most suitable for spectroscopic studies of astronomical X-ray sources in the energy range of 15-100 keV. (orig.)

  10. Bayesian inference on proportional elections.

    Directory of Open Access Journals (Sweden)

    Gabriel Hideki Vatanabe Brunello

    Full Text Available Polls for majoritarian voting systems usually show estimates of the percentage of votes for each candidate. However, proportional vote systems do not necessarily guarantee the candidate with the most percentage of votes will be elected. Thus, traditional methods used in majoritarian elections cannot be applied on proportional elections. In this context, the purpose of this paper was to perform a Bayesian inference on proportional elections considering the Brazilian system of seats distribution. More specifically, a methodology to answer the probability that a given party will have representation on the chamber of deputies was developed. Inferences were made on a Bayesian scenario using the Monte Carlo simulation technique, and the developed methodology was applied on data from the Brazilian elections for Members of the Legislative Assembly and Federal Chamber of Deputies in 2010. A performance rate was also presented to evaluate the efficiency of the methodology. Calculations and simulations were carried out using the free R statistical software.

  11. Saving Money Using Proportional Reasoning

    Science.gov (United States)

    de la Cruz, Jessica A.; Garney, Sandra

    2016-01-01

    It is beneficial for students to discover intuitive strategies, as opposed to the teacher presenting strategies to them. Certain proportional reasoning tasks are more likely to elicit intuitive strategies than other tasks. The strategies that students are apt to use when approaching a task, as well as the likelihood of a student's success or…

  12. Social Justice and Proportional Reasoning

    Science.gov (United States)

    Simic-Muller, Ksenija

    2015-01-01

    Ratio and proportional reasoning tasks abound that have connections to real-world situations. Examples in this article demonstrate how textbook tasks can easily be transformed into authentic real-world problems that shed light on issues of equity and fairness, such as population growth and crime rates. A few ideas are presented on how teachers can…

  13. Metacarpal proportions in Australopithecus africanus.

    Science.gov (United States)

    Green, David J; Gordon, Adam D

    2008-05-01

    Recent work has shown that, despite being craniodentally more derived, Australopithecus africanus had more apelike limb-size proportions than A. afarensis. Here, we test whether the A. africanus hand, as judged by metacarpal shaft and articular proportions, was similarly apelike. More specifically, did A. africanus have a short and narrow first metacarpal (MC1) relative to the other metacarpals? Proportions of both MC breadth and length were considered: the geometric mean (GM) of articular and midshaft measurements of MC1 breadth was compared to those of MC2-4, and MC1 length was compared to MC3 length individually and also to the GM of MC2 and 3 lengths. To compare the extant hominoid sample with an incomplete A. africanus fossil record (11 attributed metacarpals), a resampling procedure imposed sampling constraints on the comparative groups that produced composite intrahand ratios. Resampled ratios in the extant sample are not significantly different from actual ratios based on associated elements, demonstrating the methodological appropriateness of this technique. Australopithecus africanus metacarpals do not differ significantly from the great apes in the comparison of breadth ratios but are significantly greater than chimpanzees and orangutans in both measures of relative length. Conversely, A. africanus has a significantly smaller breadth ratio than modern humans, but does not significantly differ from this group in either measure of relative length. We conclude that the first metacarpals of A. africanus are more apelike in relative breadth while also being more humanlike in relative length, a finding consistent with previous work on A. afarensis hand proportions. This configuration would have likely promoted a high degree of manipulative dexterity, but the relatively slender, apelike first metacarpal suggests that A. africanus did not place the same mechanical demands on the thumb as more recent, stone-tool-producing hominins.

  14. Photodetectors for scintillator proportionality measurement

    Energy Technology Data Exchange (ETDEWEB)

    Moses, William W. [Lawrence Berkeley National Laboratory (United States)], E-mail: wwmoses@lbl.gov; Choong, Woon-Seng [Lawrence Berkeley National Laboratory (United States); Hull, Giulia; Payne, Steve; Cherepy, Nerine; Valentine, John D. [Lawrence Livermore National Laboratory (United States)

    2009-10-21

    We evaluate photodetectors for use in a Compton Coincidence apparatus designed for measuring scintillator proportionality. There are many requirements placed on the photodetector in these systems, including active area, linearity, and the ability to accurately measure low light levels (which implies high quantum efficiency and high signal-to-noise ratio). Through a combination of measurement and Monte Carlo simulation, we evaluate a number of potential photodetectors, especially photomultiplier tubes and hybrid photodetectors. Of these, we find that the most promising devices available are photomultiplier tubes with high ({approx}50%) quantum efficiency, although hybrid photodetectors with high quantum efficiency would be preferable.

  15. proportion: A comprehensive R package for inference on single Binomial proportion and Bayesian computations

    Directory of Open Access Journals (Sweden)

    M. Subbiah

    2017-01-01

    Full Text Available Extensive statistical practice has shown the importance and relevance of the inferential problem of estimating probability parameters in a binomial experiment; especially on the issues of competing intervals from frequentist, Bayesian, and Bootstrap approaches. The package written in the free R environment and presented in this paper tries to take care of the issues just highlighted, by pooling a number of widely available and well-performing methods and apporting on them essential variations. A wide range of functions helps users with differing skills to estimate, evaluate, summarize, numerically and graphically, various measures adopting either the frequentist or the Bayesian paradigm.

  16. Constant Proportion Debt Obligations (CPDOs)

    DEFF Research Database (Denmark)

    Cont, Rama; Jessen, Cathrine

    2012-01-01

    be made arbitrarily small—and thus the credit rating arbitrarily high—by increasing leverage, but the ratings obtained strongly depend on assumptions on the credit environment (high spread or low spread). More importantly, CPDO loss distributions are found to exhibit a wide range of tail risk measures......Constant Proportion Debt Obligations (CPDOs) are structured credit derivatives that generate high coupon payments by dynamically leveraging a position in an underlying portfolio of investment-grade index default swaps. CPDO coupons and principal notes received high initial credit ratings from...... the major rating agencies, based on complex models for the joint transition of ratings and spreads for all names in the underlying portfolio. We propose a parsimonious model for analysing the performance of CPDO strategies using a top-down approach that captures the essential risk factors of the CPDO. Our...

  17. Neutron position sensitive proportional counter

    International Nuclear Information System (INIS)

    Gal'tsov, V.S.; Zakharkin, I.I.; Kuznetsov, V.A.; Shchetinin, O.I.

    1979-01-01

    A design of a position-sensitive neutron counter is given in which ionizing events are positioned along the length of the counter on the basis of time shift between signals propagating towards both ends of the counter. The propagation velocity decreases due to the use of a spiral cathode which, together with an external grounded frame, constitutes an electromagnetic delay line. The counter frame is made of a steel tube 200 mm long and 32 mm in diameter. The spiral cathode is a single-layer solenoid, 27.5 mm in internal diameter, which is made of a copper wire. The counter filled with 3 He (1200 torr) and Kr (750 torr) mixture, its efficiency of thermal neutron detection is 48% for the 3 He(n,p) 2 H reaction. An evaluated spatial resolution is 5 mm. Total delay time for the above design of the counter is 280 ns

  18. Global Drought Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Drought Proportional Economic Loss Risk Deciles is a 2.5 minute grid of drought hazard economic loss as proportions of Gross Domestic Product (GDP) per...

  19. Global Earthquake Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Earthquake Proportional Economic Loss Risk Deciles is a 2.5 minute grid of earthquake hazard economic loss as proportions of Gross Domestic Product (GDP) per...

  20. Global Landslide Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Landslide Proportional Economic Loss Risk Deciles is a 2.5 minute grid of landslide hazard economic loss as proportions of Gross Domestic Product (GDP) per...

  1. Global Multihazard Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Multihazard Proportional Economic Loss Risks is a 2.5 minute grid of a multihazard-based economic loss risk as a proportion of the economic productivity of...

  2. Global Volcano Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Volcano Proportional Economic Loss Risk Deciles is a 2.5 minute grid of volcano hazard economic loss as proportions of Gross Domestic Product (GDP) per...

  3. Global Flood Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Flood Proportional Economic Loss Risk Deciles is a 2.5 minute grid of flood hazard economic loss as proportions of Gross Domestic Product (GDP) per analytical...

  4. Global Cyclone Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Cyclone Proportional Economic Loss Risk Deciles is a 2.5 minute grid of cyclone hazard economic loss as proportions of Gross Domestic Product (GDP) per...

  5. Global Cyclone Proportional Economic Loss Risk Deciles

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Cyclone Proportional Economic Loss Risk Deciles is a 2.5 by 2.5 minute grid of cyclone hazard economic loss as proportions of gross domestic product (GDP) per...

  6. Cognitive and Metacognitive Aspects of Proportional Reasoning

    Science.gov (United States)

    Modestou, Modestina; Gagatsis, Athanasios

    2010-01-01

    In this study we attempt to propose a new model of proportional reasoning based both on bibliographical and research data. This is impelled with the help of three written tests involving analogical, proportional, and non-proportional situations that were administered to pupils from grade 7 to 9. The results suggest the existence of a…

  7. Mix Proportion Design of Asphalt Concrete

    Science.gov (United States)

    Wu, Xianhu; Gao, Lingling; Du, Shoujun

    2017-12-01

    Based on the gradation of AC and SMA, this paper designs a new type of anti slide mixture with two types of advantages. Chapter introduces the material selection, ratio of ore mixture ratio design calculation, and determine the optimal asphalt content test and proportioning design of asphalt concrete mix. This paper introduces the new technology of mix proportion.

  8. Relating arithmetical techniques of proportion to geometry

    DEFF Research Database (Denmark)

    Wijayanti, Dyana

    2015-01-01

    The purpose of this study is to investigate how textbooks introduce and treat the theme of proportion in geometry (similarity) and arithmetic (ratio and proportion), and how these themes are linked to each other in the books. To pursue this aim, we use the anthropological theory of the didactic...

  9. A multiball read-out for the spherical proportional counter

    Science.gov (United States)

    Giganon, A.; Giomataris, I.; Gros, M.; Katsioulas, I.; Navick, X. F.; Tsiledakis, G.; Savvidis, I.; Dastgheibi-Fard, A.; Brossard, A.

    2017-12-01

    We present a novel concept of proportional gas amplification for the read-out of the spherical proportional counter. The standard single-ball read-out presents limitations for large diameter spherical detectors and high-pressure operations. We have developed a multi-ball read-out system which consists of several balls placed at a fixed distance from the center of the spherical vessel. Such a module can tune the volume electric field at the desired value and can also provide detector segmentation with individual ball read-out. In the latter case, the large volume of the vessel becomes a spherical time projection chamber with 3D capabilities.

  10. Large-Scale Analysis of Art Proportions

    DEFF Research Database (Denmark)

    Jensen, Karl Kristoffer

    2014-01-01

    ) and with majority of images having a proportion larger than one, but less than e.g. the golden ratio. Furthermore, more images have the inversed proportion, meaning that portrait paintings are more common than landscape paintings. The inverse is true for photographs, i.e. more landscape than portrait format......While literature often tries to impute mathematical constants into art, this large-scale study (11 databases of paintings and photos, around 200.000 items) shows a different truth. The analysis, consisting of the width/height proportions, shows a value of rarely if ever one (square...

  11. Proportional neutron counters for reactor engineering

    International Nuclear Information System (INIS)

    Artem'eva, I.V.; Zasadych, Yu.B.; Malyshev, E.K.

    1986-01-01

    Proportional neutron counters, designed for measuring the neutron flux density at nuclear reactors; position sensitive proportional neutron counters and recoil proton proportional counters, used at research reactors and accelerators are considered. Modern level of proportional neutron counters is described and trends in development of that field of engineering are determined. Specifications of detectors for industrial application are presented. The main trend in reactor detector development is the increase of service life, radiation resistance and thermal resistance. A particular place among the counters is occupied by position sensitive detectors, which appear to be the most rapidly developing detector type. Their further development and application sphere expansion depend on the production technology improvement, the development and lowering the price of the measuring electronic equipment

  12. Proportion congruency effects: Instructions may be enough

    Directory of Open Access Journals (Sweden)

    Olga eEntel

    2014-10-01

    Full Text Available Learning takes time, namely, one needs to be exposed to contingency relations between stimulus dimensions in order to learn, whereas intentional control can be recruited through task demands. Therefore showing that control can be recruited as a function of experimental instructions alone, that is, adapting the processing according to the instructions before the exposure to the task, can be taken as evidence for existence of control recruitment in the absence of learning. This was done by manipulating the information given at the outset of the experiment. In the first experiment, we manipulated list-level congruency proportion. Half of the participants were informed that most of the stimuli would be congruent, whereas the other half were informed that most of the stimuli would be incongruent. This held true for the stimuli in the second part of each experiment. In the first part, however, the proportion of the two stimulus types was equal. A proportion congruent effect was found in both parts of the experiment, but it was larger in the second part. In our second experiment, we manipulated the proportion of the stimuli within participants by applying an item-specific design. This was done by presenting some color words most often in their congruent color, and other color words in incongruent colors. Participants were informed about the exact word-color pairings in advance. Similar to Experiment 1, this held true only for the second experimental part. In contrast to our first experiment, informing participants in advance did not result in an item-specific proportion effect, which was observed only in the second part. Thus our results support the hypothesis that instructions may be enough to trigger list-level control, yet learning does contribute to the proportion congruent effect under such conditions. The item-level proportion effect is apparently caused by learning or at least it is moderated by it.

  13. Progress in studying scintillator proportionality: Phenomenological model

    Energy Technology Data Exchange (ETDEWEB)

    Bizarri, Gregory; Cherepy, Nerine; Choong, Woon-Seng; Hull, Giulia; Moses, William; Payne, Sephen; Singh, Jai; Valentine, John; Vasilev, Andrey; Williams, Richard

    2009-04-30

    We present a model to describe the origin of non-proportional dependence of scintillator light yield on the energy of an ionizing particle. The non-proportionality is discussed in terms of energy relaxation channels and their linear and non-linear dependences on the deposited energy. In this approach, the scintillation response is described as a function of the deposited energy deposition and the kinetic rates of each relaxation channel. This mathematical framework allows both a qualitative interpretation and a quantitative fitting representation of scintillation non-proportionality response as function of kinetic rates. This method was successfully applied to thallium doped sodium iodide measured with SLYNCI, a new facility using the Compton coincidence technique. Finally, attention is given to the physical meaning of the dominant relaxation channels, and to the potential causes responsible for the scintillation non-proportionality. We find that thallium doped sodium iodide behaves as if non-proportionality is due to competition between radiative recombinations and non-radiative Auger processes.

  14. Butane gas-flow proportional counter

    International Nuclear Information System (INIS)

    Han Jingquan; Ren Wei; Ma Liping

    2000-01-01

    It is experimentally proved that the butane can be used as an operating gas of the proportional counter. The operating performances of the counter with the butane are quite similar to that with the methane. A KX-50 butane flow proportional counter is described and its plateau characteristic is determined. For this counter, the plateau length, the slope of the plateau, the background count rate is 600 V, 1.7% per 100 V, 0.02s -1 for 239 Pu α source and about 500 V, 1.8% per 100 V, 3s -1 for 90 Sr- 90 Y source, respectively

  15. Canine Conjectures: Using Data for Proportional Reasoning

    Science.gov (United States)

    Westenskow, Arla; Moyer-Packenham, Patricia S.

    2011-01-01

    No person, place, or thing can capture the attention of a class of sixth graders like "man's best friend." To prompt students' interest in a series of lessons on proportional relationships, the authors brought in a unique teaching aid--a dog. A family dog was used to supply the measurements for scatter plots and variables so that students could…

  16. Obtaining a Proportional Allocation by Deleting Items

    NARCIS (Netherlands)

    Dorn, B.; de Haan, R.; Schlotter, I.; Röthe, J.

    2017-01-01

    We consider the following control problem on fair allocation of indivisible goods. Given a set I of items and a set of agents, each having strict linear preference over the items, we ask for a minimum subset of the items whose deletion guarantees the existence of a proportional allocation in the

  17. Proportional green time scheduling for traffic lights

    NARCIS (Netherlands)

    P. Kovacs; Le, T. (Tung); R. Núñez Queija (Rudesindo); Vu, H. (Hai); N. Walton

    2016-01-01

    textabstractWe consider the decentralized scheduling of a large number of urban traffic lights. We investigate factors determining system performance, in particular, the length of the traffic light cycle and the proportion of green time allocated to each junction. We study the effect of the length

  18. LTR design of proportional-integral observers

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Stoustrup, Jakob; Shafai, B.

    1995-01-01

    This paper applies the proportional-integral (PI) observer in connection with loop transfer recovery (LTR) design for continuous-time systems. We show that a PI observer makes it possible to obtain time recovery, i.e., exact recovery for t -+ -, under mild conditions. Based on an extension...

  19. Adaptive bayesian analysis for binomial proportions

    CSIR Research Space (South Africa)

    Das, Sonali

    2008-10-01

    Full Text Available The authors consider the problem of statistical inference of binomial proportions for non-matched, correlated samples, under the Bayesian framework. Such inference can arise when the same group is observed at a different number of times with the aim...

  20. Combining proportional and majoritarian democracy: An institutional design proposal

    Directory of Open Access Journals (Sweden)

    Steffen Ganghof

    2016-08-01

    Full Text Available The article proposes a new way to combine the “proportional” and “majoritarian” visions of democracy. The proposal blends elements of mixed electoral systems, parliamentarism, presidentialism and bicameralism. Voters are given a single vote to make two simultaneous choices: one about the proportional composition of the legislature and one about the two top parties forming a majoritarian “confidence chamber” embedded within the legislature. Only the majority in this chamber has the power to dismiss the cabinet in a vote of no-confidence. The proposed system virtually guarantees the feasibility of identifiable and stable one-party cabinets governing with shifting, issue-specific majorities in a highly proportional legislature. It is illustrated with respect to the 2013 federal election in Germany.

  1. General methods for analyzing bounded proportion data

    OpenAIRE

    Hossain, Abu

    2017-01-01

    This thesis introduces two general classes of models for analyzing proportion response variable when the response variable Y can take values between zero and one, inclusive of zero and/or one. The models are inflated GAMLSS model and generalized Tobit GAMLSS model. The inflated GAMLSS model extends the flexibility of beta inflated models by allowing the distribution on (0,1) of the continuous component of the dependent variable to come from any explicit or transformed (i.e. logit or truncated...

  2. Cylindrical geometry for proportional and drift chambers

    International Nuclear Information System (INIS)

    Sadoulet, B.

    1975-06-01

    For experiments performed around storage rings such as e + e - rings or the ISR pp rings, cylindrical wire chambers are very attractive. They surround the beam pipe completely without any dead region in the azimuth, and fit well with the geometry of events where particles are more or less spherically produced. Unfortunately, cylindrical proportional or drift chambers are difficult to make. Problems are discussed and two approaches to fabricating the cathodes are discussed. (WHK)

  3. 2 π gaseous flux proportional detector

    International Nuclear Information System (INIS)

    Guevara, E.A.; Costello, E.D.; Di Carlo, R.O.

    1986-01-01

    A counting system has been developed in order to measure carbon-14 samples obtained in the course of a study of a plasmapheresis treatment for diabetic children. The system is based on the use of a 2π gaseous flux proportional detector especially designed for the stated purpose. The detector is described and experiment results are given, determining the characteristic parameters which set up the working conditions. (Author) [es

  4. Acquisition and processing of proportional chamber data

    International Nuclear Information System (INIS)

    Kozhevnikov, Yu.A.

    1987-01-01

    A data acquisition unit for proportional chambers is described which can select data belonging to individual groups of simultaneously triggered adjacent channels (clusters) and encodes them into a format suitable for further processing. The unit is built as a standard CAMAC module of double width, was designed to operate with hardware reading significant data only, and can serve up to 8192 detection channels. The unit can be tested independently and can operate with an external storage without connection to the crate bus. Two types of errors associated with data reception are detected and diagnosed in the course of data acquisition

  5. Recent advances in gas scintillation proportional counters

    International Nuclear Information System (INIS)

    Palmer, H.E.

    1975-01-01

    Various geometrical configurations for gas scintillation proportional counters have been investigated in order to determine which is best for use in a large volume, high efficiency counter for measuring low energy gamma and x-rays. A xenon filled counter having a rod anode inside a cylindrical cathode appears to provide the best configuration for providing a uniform field and the best resolution over the total volume of the counter. The details of construction and operating characteristics of various shaped counters are described. (U.S.)

  6. High pressure BF3 proportional counter

    International Nuclear Information System (INIS)

    Mihara, Masaru; Gotoh, Eiichiro; Kodama, Masahiro

    1978-01-01

    Plateau and pulse characteristics of high pressure BF 3 proportional counter were investigated in terms of counter geometry and gas pressure, in order to develop a small-sized and high-sensitive one. Description is given of the construction of improved gas filling equipment with filling procedure. A tentative brass counter, 67 mm in cathode diameter, 40 micron in anode diameter, filled to 1.2 kg/cm 2 revealed characteristics of 150 volts plateau range, the slope of which being 3% per 100 volts at the operation voltage of around 3.3 kV, and 103% full width at half-maximum in the pulse height distribution. (auth.)

  7. Designing an optimally proportional inorganic scintillator

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Jai, E-mail: jai.singh@cdu.edu.au [School of Engineering and IT, B-Purple-12, Faculty of EHSE, Charles Darwin University, NT 0909 (Australia); Koblov, Alexander [School of Engineering and IT, B-Purple-12, Faculty of EHSE, Charles Darwin University, NT 0909 (Australia)

    2012-09-01

    The nonproportionality observed in the light yield of inorganic scintillators is studied theoretically as a function of the rates of bimolecular and Auger quenching processes occurring within the electron track initiated by a gamma- or X-ray photon incident on a scintillator. Assuming a cylindrical track, the influence of the track radius and concentration of excitations created within the track on the scintillator light yield is also studied. Analysing the calculated light yield a guideline for inventing an optimally proportional scintillator with optimal energy resolution is presented.

  8. Energy Proportionality for Disk Storage Using Replication

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinoh; Rotem, Doron

    2010-09-09

    Energy saving has become a crucial concern in datacenters as several reports predict that the anticipated energy costs over a three year period will exceed hardware acquisition. In particular, saving energy for storage is of major importance as storage devices (and cooling them off) may contribute over 25 percent of the total energy consumed in a datacenter. Recent work introduced the concept of energy proportionality and argued that it is a more relevant metric than just energy saving as it takes into account the tradeoff between energy consumption and performance. In this paper, we present a novel approach, called FREP (Fractional Replication for Energy Proportionality), for energy management in large datacenters. FREP includes areplication strategy and basic functions to enable flexible energy management. Specifically, our method provides performance guarantees by adaptively controlling the power states of a group of disks based on observed and predicted workloads. Our experiments, using a set of real and synthetic traces, show that FREP dramatically reduces energy requirements with a minimal response time penalty.

  9. Amplifier Design for Proportional Ionization Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Baker, W. H.

    1950-08-24

    This paper presents the requirements of a nuclear amplifier of short resolving time, designed to accept pulses of widely varying amplitudes. Data are given which show that a proportional ionization chamber loaded with a 1,000-ohm resistor develops pulses of 0.5 microsecond duration and several volts amplitude. Results indicate that seven basic requirements are imposed on the amplifier when counting soft beta and gamma radiation in the presence of alpha particles, without absorbers. It should, (1) have a fast recovery time, (2) have a relatively good low frequency response, (3) accept pulses of widely varying heights without developing spurious pulsed, (4) have a limiting output stage, (5) preserve the inherently short rise time of the chamber, (6) minimize pulse integration, and (7) have sufficient gain to detect the weak pulses well below the chamber voltage at which continuous discharge takes place. The results obtained with an amplifier which meets these requirements is described. A formula is derived which indicates that redesign of the proportional ionization chamber might eliminate the need for an amplifier. This may be possible if the radioactive particles are collimated parallel to the collecting electrode.

  10. Proportional-Integral-Resonant AC Current Controller

    Directory of Open Access Journals (Sweden)

    STOJIC, D.

    2017-02-01

    Full Text Available In this paper an improved stationary-frame AC current controller based on the proportional-integral-resonant control action (PIR is proposed. Namely, the novel two-parameter PIR controller is applied in the stationary-frame AC current control, accompanied by the corresponding parameter-tuning procedure. In this way, the proportional-resonant (PR controller, common in the stationary-frame AC current control, is extended by the integral (I action in order to enable the AC current DC component tracking, and, also, to enable the DC disturbance compensation, caused by the voltage source inverter (VSI nonidealities and by nonlinear loads. The proposed controller parameter-tuning procedure is based on the three-phase back-EMF-type load, which corresponds to a wide range of AC power converter applications, such as AC motor drives, uninterruptible power supplies, and active filters. While the PIR controllers commonly have three parameters, the novel controller has two. Also, the provided parameter-tuning procedure needs only one parameter to be tuned in relation to the load and power converter model parameters, since the second controller parameter is directly derived from the required controller bandwidth value. The dynamic performance of the proposed controller is verified by means of simulation and experimental runs.

  11. Oblique incidence type resistance wire proportional position detector

    International Nuclear Information System (INIS)

    Iwatani, Kazuo

    1977-01-01

    A high resistance wire, proportional counter is being developed for the use as the position detector to be installed at the focal plane of the magnet of high resolution, reaction particle analyzer for SF cyclotron. One of the difficulties to attain the target performance is its low positional resolution in case of the oblique incidence of particles with small energy loss in the counter in case of so-called single wire proportional counter. Adopting one of the solutions, proposed by Markham et al. of Michigan State University, that processes signals by ingenious cathode read-out and makes the detector into an equivalent ''thin'' counter, a high resistance wire detector still having simple read-out has been devised. The oblique incidence effect seems to be caused by the fluctuation (Landau distribution) of particle energy loss in counter gas. As a result of some discussion on this matter, the detector having increased five resistance wires instead of single wire, and having guard wires so as to make the electric field intensity in the vicinity of the cathode weak, has been manufactured to obtain the ''thin'' counter without considerably changing the overall thickness of the counter. Signal read-out is carried out by charge division method. As a result of the test, the positional resolution of Δx=1.0 mm has been attained when incidence angle was 35 deg and the collimation of particles was about 0.5 mm diameter for protons of 50 meV. (Wakatsuki, Y.)

  12. Proportional representation apportionment methods and their applications

    CERN Document Server

    Pukelsheim, Friedrich

    2017-01-01

    The book offers an in-depth study of the translation of vote counts into seat numbers in proportional representation systems  – an approach guided by practical needs. It also provides plenty of empirical instances illustrating the results. It analyzes in detail the 2014 elections to the European Parliament in the 28 member states, as well as the 2009 and 2013 elections to the German Bundestag. This second edition is a complete revision and expanded version of the first edition published in 2014, and many empirical election results that serve as examples have been updated. Further, a final chapter has been added assembling biographical sketches and authoritative quotes from individuals who pioneered the development of apportionment methodology. The mathematical exposition and the interrelations with political science and constitutional jurisprudence make this an apt resource for interdisciplinary courses and seminars on electoral systems and apportionment methods.

  13. Calibration of proportional counters in microdosimetry

    International Nuclear Information System (INIS)

    Varma, M.N.

    1982-01-01

    Many microdosimetric spectra for low LET as well as high LET radiations are measured using commercially available (similar to EG and G) Rossi proportional counters. This paper discusses the corrections to be applied to data when calibration of the counter is made using one type of radiation, and then the counter is used in a different radiation field. The principal correction factor is due to differences in W-value of the radiation used for calibration and the radiation for which microdosimetric measurements are made. Both propane and methane base tissue-equivalent (TE) gases are used in these counters. When calibrating the detectors, it is important to use the correct stopping power value for that gas. Deviations in y-bar/sub F/ and y-bar/sub D/ are calculated for 60 Co using different extrapolation procedures from 0.15 keV/μm to zero event size. These deviations can be as large as 30%. Advantages of reporting microdosimetric parameters such as y-bar/sub F/ and y-bar/sub D/ above a certain minimum cut-off are discussed

  14. Evaluation of craniofacial proportions: A pilot study.

    Science.gov (United States)

    Sadeghian, Saied; Motamedi, Ali Mohammad Kalantar; Haerian, Alireza; Rafiei, Elahe

    2015-01-01

    Regarding the need for determining the cephalometric norms for each population and the advantages of proportional analyses, we evaluated the variables of McNamara and Schwartz analyses and their relation in a pilot study on 6-17 years old Iranian students and provided formulas, which show these relations. In this descriptive-analytical study, a tatal of cephalometric radiographs from the archive documents of Orthodontic Department of Isfahan Dental School was selected and traced. The variables of McNamara and Schwartz analyses were investigated. The data were analyzed by t-test and linear regression and Spearman correlation coefficient tests using SPSS 12 software, and the significance was set at 0.05. Then, a formula was suggested for predicting the relation between the jaws, cranium and face. The variables measured in this study were significantly different between the genders (P < 0.05), except for Co-Gn (P = 0.055), and they were higher in boys. All variables significantly increased (P < 0.05) with age from 6 to 17 years. The formulas presented in this study can be used for calculating the amount of PNS-APmax, Go-APmax and the Co-Gn, anterior nasal spine-menton in the Iranian population. Within the limitation of this study, the formula presented in this study might be considered to predict the relation between jaw dimensions and cranial base and facial dimensions in the Iranian population.

  15. Proportional counter measurements in neutron therapy beams

    International Nuclear Information System (INIS)

    Menzel, H.G.

    1984-01-01

    Dosimetry for clinical neutron therapy requires a characterization of radiation quality in addition to the specification of absorbed dose. Generally, a very simple approach has been adopted which consists in separating total absorbed dose into neutron and photon fractions. This is explained by the requirement of clinical dosimetry to apply methods suitable for routine measurements, by the lack of generally accepted improved alternatives, and by the fact that radiation quality is only one of several problems in neutron therapy not sufficiently solved. Spectra measured with low-pressure tissue-equivalent proportional counters (experimental microdosimetry) provide a detailed description of the physical properties of the radiation field at neutron therapy facilities. These descriptions are suitable for explaining the influence of different parameters (collimation, field size, phantom) on radiation quality. Although the physical properties of the radiation field as described by the measured microdosimetric distributions and quantities are not the only properties relevant for radiation effects, in general there are reasons to believe that they provide a suitable radiation quality characterization for the limited range of applications in neutron therapy. (author)

  16. Exact tests for Hardy-Weinberg proportions.

    Science.gov (United States)

    Engels, William R

    2009-12-01

    Exact conditional tests are often required to evaluate statistically whether a sample of diploids comes from a population with Hardy-Weinberg proportions or to confirm the accuracy of genotype assignments. This requirement is especially common when the sample includes multiple alleles and sparse data, thus rendering asymptotic methods, such as the common chi(2)-test, unreliable. Such an exact test can be performed using the likelihood ratio as its test statistic rather than the more commonly used probability test. Conceptual advantages in using the likelihood ratio are discussed. A substantially improved algorithm is described to permit the performance of a full-enumeration exact test on sample sizes that are too large for previous methods. An improved Monte Carlo algorithm is also proposed for samples that preclude full enumeration. These algorithms are about two orders of magnitude faster than those currently in use. Finally, methods are derived to compute the number of possible samples with a given set of allele counts, a useful quantity for evaluating the feasibility of the full enumeration procedure. Software implementing these methods, ExactoHW, is provided.

  17. Validation of models with proportional bias

    Directory of Open Access Journals (Sweden)

    Salvador Medina-Peralta

    2017-01-01

    Full Text Available Objective. This paper presents extensions to Freese’s statistical method for model-validation when proportional bias (PB is present in the predictions. The method is illustrated with data from a model that simulates grassland growth. Materials and methods. The extensions to validate models with PB were: the maximum anticipated error for the original proposal, hypothesis testing, and the maximum anticipated error for the alternative proposal, and the confidence interval for a quantile of error distribution. Results. The tested model had PB, which once removed, and with a confidence level of 95%, the magnitude of error does not surpass 1225.564 kg ha-1. Therefore, the validated model can be used to predict grassland growth. However, it would require a fit of its structure based on the presence of PB. Conclusions. The extensions presented to validate models with PB are applied without modification in the model structure. Once PB is corrected, the confidence interval for the quantile 1-α of the error distribution enables a higher bound for the magnitude of the prediction error and it can be used to evaluate the evolution of the model for a system prediction.

  18. Inferring relative proportions of DNA variants from sequencing electropherograms.

    Science.gov (United States)

    Carr, I M; Robinson, J I; Dimitriou, R; Markham, A F; Morgan, A W; Bonthron, D T

    2009-12-15

    Determination of the relative copy number of single-nucleotide sequence variants (SNVs) within a DNA sample is a frequent experimental goal. Various methods can be applied to this problem, although hybridization-based approaches tend to suffer from high-setup cost and poor adaptability, while others (such as pyrosequencing) may not be accessible to all laboratories. The potential to extract relative copy number information from standard dye-terminator electropherograms has been little explored, yet this technology is cheap and widely accessible. Since several biologically important loci have paralogous copies that interfere with genotyping, and which may also display copy number variation (CNV), there are many situations in which determination of the relative copy number of SNVs is desirable. We have developed a desktop application, QSVanalyzer, which allows high-throughput quantification of the proportions of DNA sequences containing SNVs. In reconstruction experiments, QSVanalyzer accurately estimated the known relative proportions of SNVs. By analyzing a large panel of genomic DNA samples, we demonstrate the ability of the software to analyze not only common biallelic SNVs, but also SNVs within a locus at which gene conversion between four genomic paralogs operates, and within another that is subject to CNV. QSVanalyzer is freely available at http://dna.leeds.ac.uk/qsv/. It requires the Microsoft .NET framework version 2.0, which can be installed on all Microsoft operating systems from Windows 98 onwards. msjimc@leeds.ac.uk Supplementary data are available at Bioinformatics online.

  19. Improved yield of minimal proportional sample volume platelet bacterial culture.

    Science.gov (United States)

    Kamel, Hany; Townsend, Mary; Bravo, Marjorie; Vassallo, Ralph R

    2017-10-01

    Reports of septic transfusion reactions (STRs) after transfusion of culture-negative platelets (PLTs) justify more effective prevention strategies. Pathogen reduction technologies or performance of additional point-of-issue testing are proposed strategies to enhance safety through Day 5 of storage. Trima leukoreduced apheresis PLTs (APs) were collected during two study periods (45 and 31 months) using standard procedures, with target settings adjusted during the second period to maintain split rate after increased culture volume. Primary testing for bacterial contamination was performed using BacT/ALERT 3D with sampling from the mother bag 24 to 36 hours after collection. Two culture approaches were compared: in Period A, an 8-mL sample in one aerobic culture bottle (CB), and in Period B a minimal proportional sample volume (PSV) of at least 3.8% of mother bag volume into one to three aerobic CBs (7-10 mL per bottle). In Periods A and B, 188,389 and 159,098 AP collections were tested, respectively. The true-positive (TP) rate in Period A was 0.90 per 10,000 collections and in Period B was 1.83 per 10,000 (p collections, was significantly higher than that of Period A, 3.66 per 10,000. One contaminated collection resulting in STR(s) was reported in each study period. Implementation of PSV was operationally successful and did not impact the AP split rate. Proportional sample volume improved the sensitivity of primary testing and identified collections that could have escaped detection had only a single bottle with 8- to 10-mL volume been used. PSV may represent another approach to enhanced PLT safety for 5-day storage without a requirement for secondary testing. © 2017 AABB.

  20. Boosted PWM open loop control of hydraulic proportional valves

    International Nuclear Information System (INIS)

    Amirante, R.; Innone, A.; Catalano, L.A.

    2008-01-01

    This paper presents an innovative open loop control technique for direct single stage hydraulic proportional valves whose response rate is significantly higher than that obtained by standard open loop control techniques, even comparable to more costly commercial closed loop systems. Different from standard open loop techniques, which provide the coil with a constant current proportional to the target position, the control strategy proposed in this paper employs the peak and hold (P and H) technique, widely used in Diesel engine modern supply systems, to boost the duty cycle value of the pulse width modulation (PWM) signal for a short time, namely during the spool displacement, while maintaining a lower duty cycle for holding the spool in the required opening position. The developed 'boosted PWM' technique only requires a low cost microcontroller, such as a peripheral interface controller (PIC) equipped with a metal oxide semiconductor (MOS) power driver. The PWM parameters are calibrated as a function of the spool displacement so as to maximize the response rate without introducing overshoots: the collected data are stored in the PIC. Different valve opening procedures with step response have been compared to demonstrate the merits of the proposed boosted PWM technique. No overshoots have been registered. Moreover, the proposed method is characterized by a significantly higher response rate with respect to a standard open loop control, which approximately has the same cost. Similar experimental tests show that the proposed boosted PWM technique has a response rate even higher than that provided by the more costly commercial closed loop system mounted on the valve, and it produces no overshoots

  1. Spatial Proportional Reasoning Is Associated with Formal Knowledge about Fractions

    Science.gov (United States)

    Möhring, Wenke; Newcombe, Nora S.; Levine, Susan C.; Frick, Andrea

    2016-01-01

    Proportional reasoning involves thinking about parts and wholes (i.e., about fractional quantities). Yet, research on proportional reasoning and fraction learning has proceeded separately. This study assessed proportional reasoning and formal fraction knowledge in 8- to 10-year-olds. Participants (N = 52) saw combinations of cherry juice and water…

  2. Estimating sighting proportions of American alligator nests during helicopter survey

    Science.gov (United States)

    Rice, Kenneth G.; Percival, H. Franklin; Woodward, Allan R.

    2000-01-01

    Proportions of American alligator (Alligator mississippiensis) nests sighted during aerial survey in Florida were estimated based upon multiple surveys by different observers. We compared sighting proportions across habitats, nesting seasons, and observer experience levels. The mean sighting proportion across all habitats and years was 0.736 (SE=0.024). Survey counts corrected by the mean sighting proportion reliably predicted total nest counts (7?2=0.933). Sighting proportions did not differ by habitat type (P=0.668) or year P=0.328). Experienced observers detected a greater proportion of nests (P<0.0001) than did either less experienced or inexperienced observers. Reliable estimates of nest abundance can be derived from aerial counts of alligator nests when corrected by the appropriate sighting proportion.

  3. A gas proportional scintillation counter for use in large area detector systems without photomultipliers

    International Nuclear Information System (INIS)

    Baruch, J.E.F.; Brooke, G.; Kellermann, E.W.; Bateman, J.E.; Connolly, J.F.

    1978-03-01

    The properties of a prototype gas proportional scintillation detector, for use in large numbers, are examined. The detector is designed to focus a light signal, which is proportional to ionisation loss, into a fibre optic lightguide. It is shown that a single charged particle traversing the detector produces enough light out of the lightguide to be seen by a TV camera. Problems of lifetime and large scale detector production are discussed. Properties of saturation, linearity, position sensitivity, and operating limits are examined. It is shown that an array of gas proportional scintillation detectors when used with fibre optic lightguides and TV camera readout could offer significant improvements in cost per area and reliability over a scintillator plus photomultiplier or a wire proportional chamber array. (author)

  4. Preservice Middle and High School Mathematics Teachers' Strategies When Solving Proportion Problems

    Science.gov (United States)

    Arican, Muhammet

    2018-01-01

    The purpose of this study was to investigate eight preservice middle and high school mathematics teachers' solution strategies when solving single and multiple proportion problems. Real-world missing-value word problems were used in an interview setting to collect information about preservice teachers' (PSTs) reasoning about proportional…

  5. Low-energy gamma-ray spectroscopy using an X-ray-escape gated proportional counter

    DEFF Research Database (Denmark)

    Gregers Hansen, P.; Nielsen, H.L.; Williams, E.T.

    1965-01-01

    The utility of a gas-filled proportional counter in low-energy γ spectroscopy is greatly increased if it is operated in coincidence with an escaping fluorescent X-ray. An apparatus, having an efficiency greater than 10% of singles, is described and several examples are given. An efficiency curve...

  6. Inquiry pedagogy to promote emerging proportional reasoning in primary students

    Science.gov (United States)

    Fielding-Wells, Jill; Dole, Shelley; Makar, Katie

    2014-03-01

    Proportional reasoning as the capacity to compare situations in relative (multiplicative) rather than absolute (additive) terms is an important outcome of primary school mathematics. Research suggests that students tend to see comparative situations in additive rather than multiplicative terms and this thinking can influence their capacity for proportional reasoning in later years. In this paper, excerpts from a classroom case study of a fourth-grade classroom (students aged 9) are presented as they address an inquiry problem that required proportional reasoning. As the inquiry unfolded, students' additive strategies were progressively seen to shift to proportional thinking to enable them to answer the question that guided their inquiry. In wrestling with the challenges they encountered, their emerging proportional reasoning was supported by the inquiry model used to provide a structure, a classroom culture of inquiry and argumentation, and the proportionality embedded in the problem context.

  7. The proportionality as legal limit the right negotiating

    Directory of Open Access Journals (Sweden)

    Lucas Augusto da Silva Zolet

    2015-06-01

    Full Text Available This paper proposes a maximum of proportionality study and its maximum partial, especially of the Negotiating law perspective and in the sphere of legal limitation for proportionality in the practice of commercial freedoms. The constant use of the maximum of proportionality, as the basis of judicial decisions without proper methodological rigor, triggers a debate about the use of the Theory of Fundamental Rights as a mere rhetorical reference, including criticism of an incomplete legal basis of the principle of proportionality, which by means of judicial decisions can take on a different character or subverted that provided in the doctrine of Robert Alexy.     

  8. Multiwire proportional chamber for Moessbauer spectroscopy: development and results

    International Nuclear Information System (INIS)

    Costa, M.S. da.

    1985-12-01

    A new Multiwere proportional Chamber designed for Moessbauer Spectroscopy is presented. This detector allows transmission backscattering experiments using either photons or electrons. The Moessbauer data acquisition system, partially developed for this work is described. A simple method for determining the frontier between true proportional and semi-proportional regions of operation in gaseous detectors is proposed. The study of the tertiary gas mixture He-Ar-CH 4 leads to a straight forward way of energy calibration of the electron spectra. Moessbauer spectra using Fe-57 source are presented. In particular those obtained with backsattered electrons show the feasibility of depth selective analysis with gaseous proportional counters. (author) [pt

  9. GEEORD: A SAS macro for analyzing ordinal response variables with repeated measures through proportional odds, partial proportional odds, or non-proportional odds models.

    Science.gov (United States)

    Gao, Xiaoming; Schwartz, Todd A; Preisser, John S; Perin, Jamie

    2017-10-01

    A SAS macro, GEEORD, has been developed for the analysis of ordinal responses with repeated measures through a regression model that flexibly allows the proportional odds assumption to apply (or not) separately for each explanatory variable. Previously utilized in an analysis of a longitudinal orthognathic surgery clinical trial by Preisser et al. [1,2], the basis of GEEORD is the generalized estimating equations (GEE) method for cumulative logits models described by Lipsitz et al. [3]. The macro extends the capabilities for modeling correlated ordinal data of GEECAT, a SAS macro that allows the user to model correlated categorical response data [4]. The macro applies to independent ordinal responses as a special case. Examples are provided to demonstrate the convenient application of GEEORD to two different datasets. The macro's features are illustrated in fitting models to ordinal response variables in univariate and repeated measures settings; this includes the capacity to fit the non-proportional odds model, the partial proportional odds model, and the proportional odds model. The macro additionally provides relevant tests of the proportional odds assumption. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. EXPERIENCE AND PERSPECTIVES OF PROPORTIONAL ELECTORAL SYSTEM IN UKRAINE

    OpenAIRE

    Скоропад Тетяна Іванівна

    2015-01-01

    The existing approaches to the typology of electoral systems is analized, the features of the majority, proportional and mixed electoral systems are clarified. The evolution of the Ukrainian electoral system during the period of independence is characterized. Proportional electoral system is seen as a factor in ensuring the stability and effectiveness of elected bodies.

  11. The Improved Estimation of Ratio of Two Population Proportions

    Science.gov (United States)

    Solanki, Ramkrishna S.; Singh, Housila P.

    2016-01-01

    In this article, first we obtained the correct mean square error expression of Gupta and Shabbir's linear weighted estimator of the ratio of two population proportions. Later we suggested the general class of ratio estimators of two population proportions. The usual ratio estimator, Wynn-type estimator, Singh, Singh, and Kaur difference-type…

  12. 34 CFR Appendix to Part 81 - Illustrations of Proportionality

    Science.gov (United States)

    2010-07-01

    ... expended in the second preceding fiscal year and provides for a reduction in grant amount proportional to... did not provide for a proportional reduction in the grant award, the LEA would be required to return..., determines that the proposed programs are sound and the application is in compliance with Federal law, and...

  13. Golden proportions as predictors of attractiveness and malocclusion

    Directory of Open Access Journals (Sweden)

    Ahluwalia Rajiv

    2014-01-01

    Conclusion: Facial proportions of the attractive females were significantly different from those with malocclusion, but did not show a constant trend of being closer to the golden number. Furthermore, the golden proportions were not analogous with the facial esthetics of the attractive females.

  14. Fairness of seat allocation methods in proportional representation ...

    African Journals Online (AJOL)

    Fairness of seat allocation methods in proportional representation. L van Eck, S E Visagie, H C de Kock. Abstract. In this paper the fairness of some methods of allocating seats in a proportional representation (PR) voting system is investigated. Different PR systems are in use throughout the democratic world, but the primary ...

  15. Attention Modulation by Proportion Congruency: The Asymmetrical List Shifting Effect

    Science.gov (United States)

    Abrahamse, Elger L.; Duthoo, Wout; Notebaert, Wim; Risko, Evan F.

    2013-01-01

    Proportion congruency effects represent hallmark phenomena in current theorizing about cognitive control. This is based on the notion that proportion congruency determines the relative levels of attention to relevant and irrelevant information in conflict tasks. However, little empirical evidence exists that uniquely supports such an attention…

  16. Sexual dimorphism based on body proportions and ontogenetic ...

    African Journals Online (AJOL)

    Sexual dimorphism in the Brazilian electric ray Narcine brasiliensis from the south-western Atlantic coast was evaluated based on body proportions and ontogenetic changes. All regions of the body were found to have differences in body proportions between the sexes, except the spiracles. The nature of allometric and ...

  17. The principle of proportionality and European contract law

    NARCIS (Netherlands)

    Cauffman, C.; Rutgers, J.; Sirena, P.

    2015-01-01

    The paper investigates the role of the principle of proportionality within contract law, in balancing the rights and obligations of the contracting parties. It illustrates that the principle of proportionality is one of the general principles which govern contractual relations, and as such it is an

  18. Which Mixed-Member Proportional Electoral Formula Fits You Best? Assessing the Proportionality Principle of Positive Vote Transfer Systems

    DEFF Research Database (Denmark)

    Bochsler, Daniel

    2014-01-01

    Mixed-member proportional systems (MMP) are a family of electoral systems which combine district-based elections with a proportional seat allocation. Positive vote transfer systems belong to this family. This article explains why they might be better than their siblings, and examines under which ...

  19. Visualizing Proportions and Dissimilarities by Space-filling Maps

    DEFF Research Database (Denmark)

    Carrizosa, Emilio; Guerrero, Vanesa; Morales, Dolores Romero

    2017-01-01

    In this paper we address the problem of visualizing a set of individuals, which have attached a statistical value given as a proportion, and a dissimilarity measure. Each individual is represented as a region within the unit square, in such a way that the area of the regions represent the proport......In this paper we address the problem of visualizing a set of individuals, which have attached a statistical value given as a proportion, and a dissimilarity measure. Each individual is represented as a region within the unit square, in such a way that the area of the regions represent...

  20. Goodness-of-fit test for proportional subdistribution hazards model.

    Science.gov (United States)

    Zhou, Bingqing; Fine, Jason; Laird, Glen

    2013-09-30

    This paper concerns using modified weighted Schoenfeld residuals to test the proportionality of subdistribution hazards for the Fine-Gray model, similar to the tests proposed by Grambsch and Therneau for independently censored data. We develop a score test for the time-varying coefficients based on the modified Schoenfeld residuals derived assuming a certain form of non-proportionality. The methods perform well in simulations and a real data analysis of breast cancer data, where the treatment effect exhibits non-proportional hazards. Copyright © 2013 John Wiley & Sons, Ltd.

  1. DC motor proportional control system for orthotic devices

    Science.gov (United States)

    Blaise, H. T.; Allen, J. R.

    1972-01-01

    Multi-channel proportional control system for operation of dc motors for use with externally-powered orthotic arm braces is described. Components of circuitry and principles of operation are described. Schematic diagram of control circuit is provided.

  2. Proportion of patients in the Uganda rheumatic heart disease ...

    African Journals Online (AJOL)

    . The optimum management strategy was determined according to ... Conclusion: There is a high proportion of patients with severe disease that require surgical treatment yet they cannot access this therapy due to absence of local expertise.

  3. Proportional basal area method for implementing selection silviculture systems in longleaf pine forests

    Science.gov (United States)

    Dale G. Brockway; Edward F. Loewenstein; Kenneth W. Outcalt

    2014-01-01

    Proportional basal area (Pro-B) was developed as an accurate, easy-to-use method for making uneven-aged silviculture a practical management option. Following less than 3 h of training, forest staff from a range of professional backgrounds used Pro-B in an operational-scale field study to apply single-tree selection and group selection systems in longleaf pine (Pinus...

  4. ["Golden proportion" and its application to calculate dentition].

    Science.gov (United States)

    Vadachkoriia, N R; Gumberidze, N Sh; Mandzhavidze, N A

    2007-01-01

    Within an evolutionary process, the nature has created the standard of aesthetics - a "gold proportion" on the basis of which, the parts of human body, to be more exact, teeth and denture correspond to each other and to own parts by the size, which is the ideal precondition for ideal appearance. The charming smile serves as the proof, that teeth in denture are located by a principle of "gold proportion". A "gold proportion" is the corner stone of beauty and it can be applied with success in stomatology. Proportion is the certain ratio between parts, and proportional means a proper correlation of parts among themselves. It is reputed, that knowledge about "gold proportion" Pythagor has got from products of the Egyptian and Babylon scientists. And this is true, proportions of cult constructions, bas-relieves, pyramids in Giza, home appliances and ornaments from Tutanhamon tomb testify, that under their creation the Egyptian masters were guided by a principle of "gold proportion". The facade of ancient Greek temple Parthenon is built by a principle of "gold proportion". During archeological digs of this temple the compasses which sculptors and architects of an ancient world used has been found. The "gold proportion" is mentioned in the work which has reached us "Beginning" the author is the scientist of antique epoch Euclid. In 1509, in Venice the book of Luka Pacholi the "Divine proportion" has been published, its illustration is attributed to Leonardo de Vinci. This work has been recognized as a "Hymn of a gold proportion". In 1885 the German researcher professor Zeising published his work - "Aesthetic researches". When Zeising has received numerical values of piece length, he saw that they coincided with figures of some numerical sequence, which was offered by the great Italian mathematician of Middle Ages Fibonacci (or Leonardo Pisano). In his composition the "Abacus Book" Leonardo Fibonacci showed aforesaid sequence of numbers, by means of which he has explained

  5. PROPERTIES OF WOOD AND RICE HUSK PARTICLEBOARD IN DIFFERENT PROPORTIONS

    Directory of Open Access Journals (Sweden)

    Rafael Rodolfo de Melo

    2010-03-01

    Full Text Available This work aimed at evaluating the quality of particleboard manufactured with different wood proportions (Eucalyptus grandis and rice husk. The composites were produced in the proportions 0, 20, 40, 60, 80, and 100% of rice husk with the use of urea-formaldehyde and tannin-formaldehyde adhesives. In order to characterize the quality of the particleboards, physical properties (density; moisture content; water absorption and thickness swelling after 2 and 24 hours of immersion in water and mechanical properties (static bending; internal bonding and screw withdrawal were considered. Results showed that increasing rice husk proportion caused larger instability and a decrease in the resistance of particleboards. Particleboards manufactured with tannin-formaldehyde resins presented higher quality when compared to urea-formaldehyde. 

  6. A reduced feedback proportional fair multiuser scheduling scheme

    KAUST Repository

    Shaqfeh, Mohammad

    2011-12-01

    Multiuser switched-diversity scheduling schemes were recently proposed in order to overcome the heavy feedback requirements of conventional opportunistic scheduling schemes by applying a threshold-based, distributed and ordered scheduling mechanism. A slight reduction in the prospected multiuser diversity gains is an acceptable trade-off for great savings in terms of required channel-state-information feedback messages. In this work, we propose a novel proportional fair multiuser switched-diversity scheduling scheme and we demonstrate that it can be optimized using a practical and distributed method to obtain the per-user feedback thresholds. We demonstrate by numerical examples that our reduced feedback proportional fair scheduler operates within 0.3 bits/sec/Hz from the achievable rates by the conventional full feedback proportional fair scheduler in Rayleigh fading conditions. © 2011 IEEE.

  7. Multiaxial low cycle fatigue life under non-proportional loading

    International Nuclear Information System (INIS)

    Itoh, Takamoto; Sakane, Masao; Ohsuga, Kazuki

    2013-01-01

    A simple and clear method of evaluating stress and strain ranges under non-proportional multiaxial loading where principal directions of stress and strain are changed during a cycle is needed for assessing multiaxial fatigue. This paper proposes a simple method of determining the principal stress and strain ranges and the severity of non-proportional loading with defining the rotation angles of the maximum principal stress and strain in a three dimensional stress and strain space. This study also discusses properties of multiaxial low cycle fatigue lives for various materials fatigued under non-proportional loadings and shows an applicability of a parameter proposed by author for multiaxial low cycle fatigue life evaluation

  8. High gain proportional rf control stability at TESLA cavities

    Directory of Open Access Journals (Sweden)

    Elmar Vogel

    2007-05-01

    Full Text Available Fast proportional rf control is used as the basis for rf field regulation in actual linear accelerator projects like the international linear collider (ILC and the European x-ray free electron laser (XFEL based on TESLA technology. Additional control loops improve the field regulation by treating repetitive effects and compensating the beam loading. Nevertheless, the ability for high gain operation of the fast loops is desirable for the strong suppression of nonpredictive and nonrepetitive disturbances. TESLA cavities host nine fundamental modes (FMs where only one is used for beam acceleration. The unwanted FMs have a significant influence on the proportional rf control loop stability at high gains. Within this paper, the stability of proportional rf control loops taking the FMs and digitalization effects into account will be discussed in detail together with measures enabling a significant increase of the gain values.

  9. Prospective Teachers Proportional Reasoning and Presumption of Student Work

    Directory of Open Access Journals (Sweden)

    Mujiyem Sapti

    2015-08-01

    Full Text Available This study aimed to describe the proportional reasoning of prospective teachers and their predictions about students' answers. Subjects were 4 prospective teacher  7th semester Department of Mathematics Education, Muhammadiyah University of Purworejo. Proportional reasoning task used to obtain research data. Subjects were asked to explain their reasoning and write predictions of student completion. Data was taken on October 15th, 2014. Interviews were conducted after the subjects completed the task and recorded with audio media. The research data were subject written work and interview transcripts. Data were analyzed using qualitative analysis techniques. In solving the proportional reasoning task, subjects using the cross product. However, they understand the meaning of the cross product. Subject also could predict students' reasoning on the matter.

  10. Proportional Motor Recovery After Stroke: Implications for Trial Design.

    Science.gov (United States)

    Stinear, Cathy M; Byblow, Winston D; Ackerley, Suzanne J; Smith, Marie-Claire; Borges, Victor M; Barber, P Alan

    2017-03-01

    Recovery of upper-limb motor impairment after first-ever ischemic stroke is proportional to the degree of initial impairment in patients with a functional corticospinal tract (CST). This study aimed to investigate whether proportional recovery occurs in a more clinically relevant sample including patients with intracerebral hemorrhage and previous stroke. Patients with upper-limb weakness were assessed 3 days and 3 months poststroke with the Fugl-Meyer scale. Transcranial magnetic stimulation was used to test CST function, and patients were dichotomized according to the presence of motor evoked potentials in the paretic wrist extensors. Linear regression modeling of Δ Fugl-Meyer score between 3 days and 3 months was performed, with predictors including initial impairment (66 - baseline Fugl-Meyer score), age, sex, stroke type, previous stroke, comorbidities, and upper-limb therapy dose. One hundred ninety-two patients were recruited, and 157 completed 3-month follow-up. Patients with a functional CST made a proportional recovery of 63% (95% confidence interval, 55%-70%) of initial motor impairment. The recovery of patients without a functional CST was not proportional to initial impairment and was reduced by greater CST damage. Recovery of motor impairment in patients with intact CST is proportional to initial impairment and unaffected by previous stroke, type of stroke, or upper-limb therapy dose. Novel interventions that interact with the neurobiological mechanisms of recovery are needed. The generalizability of proportional recovery is such that patients with intracerebral hemorrhage and previous stroke may usefully be included in interventional rehabilitation trials. URL: http://www.anzctr.org.au. Unique identifier: ANZCTR12611000755932. © 2017 American Heart Association, Inc.

  11. Avalanche localization and its effects in proportional counters

    International Nuclear Information System (INIS)

    Fischer, J.; Okuno, H.; Walenta, A.H.

    1977-11-01

    Avalanche development around the anode wire in a gas proportional counter is investigated. In the region of proportional gas amplification, the avalanche is found to be well localized on one side of the anode wire, where the electrons arrive along the field lines from the point of primary ionization. Induced signals on electrodes surrounding the anode wire are used to measure the azimuthal position of the avalanche on the anode wire. Practical applications of the phenomena such as left-right assignment in drift chambers and measurement of the angular direction of the primary ionization electrons drifting towards the anode wire are discussed

  12. Identification of secondary particles by proportional and drift chambers

    International Nuclear Information System (INIS)

    Allison, W.W.M.

    1975-01-01

    The present status of the theory and experiment of the ionization loss of relativistic particles in thin proportional counters is described. The results of an experiment to compare complete calibrated energy spectra with the Monte Carlo predictions, to investigate different statistical treatments of the data, and to distinguish pions and protons on line are presented. Two devices are described designed to separate kaons, pions and protons under realistic conditions, one of them being an array of 32x128 cylindrical proportional chambers, the other - a drift chamber. Their advantages and limitations are discussed

  13. Gain stabilisation of gas-flow proportional counters

    International Nuclear Information System (INIS)

    Denecke, B.; Grosse, G.; Szabo, T.

    1998-01-01

    A stabilisation of the gas gain for proportional counters with a continuous gas flow is described. New gas-flow systems for two end-window counters and one pressurised proportional counter were developed. The gas density of the counting-gas flow is stabilised by a two-stage back-pressure regulation system. The pressure in the gas flow is compared with the pressure in a reference vessel. During one month of operation the gain was stable within ±0.3%

  14. Methods of calculus for neutron spectrometry in proportional counters

    International Nuclear Information System (INIS)

    Butragueno Casado, J.L.; Blazquez Martinez, J.B.; Barrado Menendez, J.M.

    1976-01-01

    Response functions for cylindrical proportional counters with hydrogenated gases have been determined, taking in account only wall effect, by means of two independent calculus methods. One of them is a Monte Carlo application and the other one analytica at all. Results of both methods have been compared. (Author)

  15. Methods of calculus for neutron spectrometry in proportional counters

    International Nuclear Information System (INIS)

    Butragueno, J.L.; Blazquez, J.B.; Barrado, J.M.

    1976-01-01

    Response functions for cylindrical proportional counters with hidrogenated gases have been determined, taking in account only wall effect, by means of two independent calculus methods. One of them is a Montecarlo application and the other one analytical at all. Results of both methods have been compared. (author) [es

  16. The Case of Lesotho's Mixed Member Proportional System | Kapa ...

    African Journals Online (AJOL)

    preparation of the 2002 poll, prominent among which has been the introduction of the Mixed Member Proportional (MMP) electoral system. Through this model, Lesotho enjoyed a large degree of political stability as almost all parties that contested the poll got representation in the national parliament. However, following the ...

  17. The proportional odds cumulative incidence model for competing risks

    DEFF Research Database (Denmark)

    Eriksson, Frank; Li, Jianing; Scheike, Thomas

    2015-01-01

    We suggest an estimator for the proportional odds cumulative incidence model for competing risks data. The key advantage of this model is that the regression parameters have the simple and useful odds ratio interpretation. The model has been considered by many authors, but it is rarely used in pr...

  18. Nature and proportion of total injuries at the Stellenbosch Rugby ...

    African Journals Online (AJOL)

    Objective. The purpose of this study was to compare the nature and proportion of total injuries occurring at Stellenbosch Rugby Football Club in Stellenbosch, South Africa, between the years 1973 - 1975 and 2003 - 2005. Design. Retrospective, descriptive study. Main outcome measures. Injured rugby players from the ...

  19. The proportion of asthma and patterns of asthma medications ...

    African Journals Online (AJOL)

    The proportion of asthma and patterns of asthma medications prescriptions among adult patients in the chest, accident and emergency units of a tertiary health care ... Methods: A retrospective chart review at Mulago Hospital chest clinic and A&E department from January 1st 2009 to December 31st 2009 was performed.

  20. determining the optimum proportion of shea waste in anaerobic co

    African Journals Online (AJOL)

    DEPT OF AGRICULTURAL ENGINEERING

    fermentation treatments with varying proportions of shea waste and cattle manure were investi- gated. It was found out that only the treatment ... energy consumed and five billion, the other. 40% (ICC, 2001). There is a close relationship .... Organic dry matter concentration of 7% for all treatment substrates and the hydraulic.

  1. Differences in body composition, body proportions and timing of ...

    African Journals Online (AJOL)

    The purpose of this study was to assess differences in body composition, proportions and timing of puberty between stunted and non-stunted South African adolescents in the North West Province, South Africa. A total of 259 black adolescents (118 boys, 141 girls), aged 13-18 years were measured. The following data were ...

  2. On estimation methods and test for proportional hazards ...

    African Journals Online (AJOL)

    These methods were described and applied to two datasets, a clinical dataset on breast cancer patients and a dataset on duration of labour before delivery. We also checked for proportional hazards assumptions on some of the covariates used in the analysis. Using Akaike Information Criterion (AIC) for overall model ...

  3. Attentional Control and the Relatedness Proportion Effect in Semantic Priming

    Science.gov (United States)

    Hutchison, Keith A.

    2007-01-01

    In 2 experiments, participants completed both an attentional control battery (OSPAN, antisaccade, and Stroop tasks) and a modified semantic priming task. The priming task measured relatedness proportion (RP) effects within subjects, with the color of the prime indicating the probability that the to-be-named target would be related. In Experiment…

  4. Position sensitive proportional counters as focal plane detectors

    International Nuclear Information System (INIS)

    Ford, J.L.C. Jr.

    1979-01-01

    The rise time and charge division techniques for position decoding with RC-line proportional counters are reviewed. The advantages that these detectors offer as focal plane counters for nuclear spectroscopy performed with magnetic spectrographs are discussed. The theory of operation of proportional counters as position sensing devices is summarized, as well as practical aspects affecting their application. Factors limiting the position and energy resolutions obtainable with a focal plane proportional counter are evaluated and measured position and energy loss values are presented for comparison. Detector systems capable of the multiparameter measurements required for particle identification, background suppression and ray-tracing are described in order to illustrate the wide applicability of proportional counters within complex focal plane systems. Examples of the use of these counters other than with magnetic spectrographs are given in order to demonstrate their usefulness in not only nuclear physics but also in fields such as solid state physics, biology, and medicine. The influence of the new focal plane detector systems on future magnetic spectrograph designs is discussed. (Auth.)

  5. Design considerations for a micromachined proportional control valve

    NARCIS (Netherlands)

    Groen, Maarten; Brouwer, Dannis Michel; Wiegerink, Remco J.; Lötters, Joost Conrad

    2012-01-01

    Precise mass flow control is an essential requirement for novel, small-scale fluidic systems. However, a small-volume, low-leakage proportional control valve for minute fluid flows has not yet been designed or manufactured. A survey is therefore made of the primary design considerations of a

  6. 16 CFR 240.9 - Proportionally equal terms.

    Science.gov (United States)

    2010-01-01

    ... ADVERTISING ALLOWANCES AND OTHER MERCHANDISING PAYMENTS AND SERVICES § 240.9 Proportionally equal terms. (a... type of service, or payments for more than one type of service, all the services or payments should be... 12 cents a case purchased for expenditures on either newspaper advertising or handbills. Example 1: A...

  7. Geometric proportions in Islamic architecture: case of the Sidi El ...

    African Journals Online (AJOL)

    In the next step the measurements of heights, widths, lengths and angles of different architectural elements were compared in order to find arithmetic and harmonic proportions. The last ones were found especially in the golden number Φ, equal to 1.618. In addition, the cubit of time was computed and found equal to 0.4375 ...

  8. Development of proportional counters using photosensitive gases and liquids

    International Nuclear Information System (INIS)

    Anderson, D.F.

    1984-10-01

    An introduction to the history and to the principle of operation of wire chambers using photosensitive gases and liquids is presented. Their use as light sensors coupled to Gas Scintillation Proportional Counters and BaF 2 , as well as their use in Cherenkov Ring imaging, is discussed in some detail. 42 references, 21 figures

  9. Transposition of Knowledge: Encountering Proportionality in an Algebra Task

    Science.gov (United States)

    Lundberg, Anna. L. V.; Kilhamn, Cecilia

    2018-01-01

    This article reports on an analysis of the process in which "knowledge to be taught" was transposed into "knowledge actually taught," concerning a task including proportional relationships in an algebra setting in a grade 6 classroom. We identified affordances and constraints of the task by describing the mathematical…

  10. Non-Proportionality of Organic Scintillators and BGO

    Science.gov (United States)

    Nassalski, A.; Moszy¿ski, M.; Syntfeld-Ka¿uch, A.; ¿widerski, ¿.; Szcze¿¿niak, T.

    2008-06-01

    According to the present knowledge the non-proportionality of the light yield of scintillators appears to be the fundamental limitation of energy resolution. Thus, the understanding of its origin is of the great importance for a development of new scintillators with enhanced energy resolution. In this respect, the non-proportional response of the typical organic scintillators was studied in comparison to that of a BGO crystal. The studies covered tests of BC408 plastic, BC501A liquid scintillator and anthracene organic crystal. The measurements showed a much larger range of energies presenting non-proportional response compared to that known for inorganic scintillators. In the case of anthracene the non-proportionality covers energy range up to about 500 keV, while for the BC408 plastic and BC501A liquid scintillators, it is above 4 MeV energy lost by gamma quanta. The observed effect can be related to a strong quenching of the light for charged particles in organic scintillators, which is much larger than that observed in inorganic scintillators.

  11. Performance Evaluation of Proportional Fair Scheduling Algorithm with Measured Channels

    DEFF Research Database (Denmark)

    Sørensen, Troels Bundgaard; Pons, Manuel Rubio

    2005-01-01

    Motivated by the promising performance results of the proportional fair (PF) packet scheduling algorithm, often quoted in connection with WCDMA High Speed Downlink Packet Access (HSDPA), we have performed an evaluation of the PF gain in comparison to the simpler round robin (RR) scheduler when...

  12. The influence of proportion of Hereford breeding in a multibreed ...

    African Journals Online (AJOL)

    Unknown

    performance traits into a "new breed" that is in harmony with the production environment and market requirements. (Lin, 1996; Schoeman, 1999). The aim of this study was to assess the contribution of the Hereford breed in a multibreed beef cattle herd in an intensive production system and to obtain the desired proportion of ...

  13. What proportion of abortion seekers in Calabar are really pregnant ...

    African Journals Online (AJOL)

    Context: The incidence of induced abortion and the associated health risks are high in Calabar, Nigeria. There is need to confirm whether all the women subjected to these procedures are really pregnant. Objective: To determine what proportion of women seeking abortion services in Calabar were really pregnant.

  14. Neutron sensitivity improvement in boron-lined proportional counters

    International Nuclear Information System (INIS)

    Dighe, P.M.; Prasad, K.R.; Kataria, S.K.

    2002-01-01

    Various techniques have been employed to improve the neutron sensitivity of boron-coated proportional counters developed indigenously. A boron-lined proportional counter (67 mm ID x 750 mm length) of 17 cps/nv thermal neutron sensitivity is developed by coating 92% enriched 10 B on the inner wall of the counter. This counter can be used for low thermal neutron flux (∼0.2 nv) at various applications such as neutron area monitoring, reactor start-up instrumentation, assay of fissile materials and detection of fuel failure. An improvement in sensitivity was also achieved by summing the output signals from four 10 B lined counters and two BF 3 proportional counters. The summation did not change the susceptibility of the device to gamma interference. In view of the scarcity of enriched 10 B isotope, indigenously available natural boron coated two prototype proportional counters are developed of 0.8 cps/nv and 1.1 cps/nv thermal neutron sensitivity. Efforts have been made to improve the sensitivity with boron coated 3-dimensional structures introduced into the sensitive volume. Tests in thermal neutron flux showed 50% improvement in the sensitivity due to the introduction of additional boron coated wires. Another counter with 51 boron-coated annular discs (23 mm OD X 10 mm ID X 1 mm thick) mounted perpendicular to the axis of the cathode showed 1.7 cps/nv neutron sensitivity, an improvement by a factor of 2.5. (author)

  15. One-step quantitative cortisol dipstick with proportional reading

    NARCIS (Netherlands)

    Leung, Wingman; Chan, Puiyee; Bosgoed, F.; Lehmann, Karin; Renneberg, Ilka; Lehmann, Matthias; Renneberg, Reinhard

    2003-01-01

    Rapid quantitative immuno-detection of haptens by the lateral flow assay without “typical” competitive inhibition results is studied. In the present study, we describe an immuno-threshold-based assay for the quantification of cortisol. It gives a signal which is directly proportional to the cortisol

  16. Development of a honeycomb gas proportional counter array for ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 60; Issue 5. Development of a honeycomb gas proportional counter array for photon multiplicity measurements in high multiplicity environment. M S Ganti M M Aggarwal S K Badyal V S Bhatia S Chattopadhyay A K Dubey M R Majumdar M S Ganti A Kumar T K Nayak ...

  17. An Axiomatization of the Proportional Rule in Financial Networks

    NARCIS (Netherlands)

    Csoka, Péter; Herings, P. Jean-Jacques

    2017-01-01

    The most important rule to determine payments in real-life bankruptcy problems is the proportional rule. Many bankruptcy problems are characterized by network aspects and default may occur as a result of contagion. Indeed, in financial networks with defaulting agents, the values of the agents'

  18. VennMaster: Area-proportional Euler diagrams for functional GO analysis of microarrays

    Directory of Open Access Journals (Sweden)

    Gress Thomas M

    2008-01-01

    Full Text Available Abstract Background Microarray experiments generate vast amounts of data. The functional context of differentially expressed genes can be assessed by querying the Gene Ontology (GO database via GoMiner. Directed acyclic graph representations, which are used to depict GO categories enriched with differentially expressed genes, are difficult to interpret and, depending on the particular analysis, may not be well suited for formulating new hypotheses. Additional graphical methods are therefore needed to augment the GO graphical representation. Results We present an alternative visualization approach, area-proportional Euler diagrams, showing set relationships with semi-quantitative size information in a single diagram to support biological hypothesis formulation. The cardinalities of sets and intersection sets are represented by area-proportional Euler diagrams and their corresponding graphical (circular or polygonal intersection areas. Optimally proportional representations are obtained using swarm and evolutionary optimization algorithms. Conclusion VennMaster's area-proportional Euler diagrams effectively structure and visualize the results of a GO analysis by indicating to what extent flagged genes are shared by different categories. In addition to reducing the complexity of the output, the visualizations facilitate generation of novel hypotheses from the analysis of seemingly unrelated categories that share differentially expressed genes.

  19. Application of the finite-difference approximation to electrostatic problems in gaseous proportional counters

    International Nuclear Information System (INIS)

    Waligorski, M.P.R.; Urbanczyk, K.M.

    1975-01-01

    The basic principles of the finite-difference approximation applied to the solution of electrostatic field distributions in gaseous proportional counters are given. Using this method, complicated two-dimensional electrostatic problems may be solved, taking into account any number of anodes, each with its own radius, and any cathode shape. A general formula for introducing the anode radii into the calculations is derived and a method of obtaining extremely accurate (up to 0.1%) solutions is developed. Several examples of potential and absolute field distributions for single rectangular and multiwire proportional counters are calculated and compared with exact results according to Tomitani, in order to discuss in detail errors of the finite-difference approximation. (author)

  20. Calibration methodology for proportional counters applied to yield measurements of a neutron burst

    International Nuclear Information System (INIS)

    Tarifeño-Saldivia, Ariel; Pavez, Cristian; Soto, Leopoldo; Mayer, Roberto E.

    2014-01-01

    This paper introduces a methodology for the yield measurement of a neutron burst using neutron proportional counters. This methodology is to be applied when single neutron events cannot be resolved in time by nuclear standard electronics, or when a continuous current cannot be measured at the output of the counter. The methodology is based on the calibration of the counter in pulse mode, and the use of a statistical model to estimate the number of detected events from the accumulated charge resulting from the detection of the burst of neutrons. The model is developed and presented in full detail. For the measurement of fast neutron yields generated from plasma focus experiments using a moderated proportional counter, the implementation of the methodology is herein discussed. An experimental verification of the accuracy of the methodology is presented. An improvement of more than one order of magnitude in the accuracy of the detection system is obtained by using this methodology with respect to previous calibration methods

  1. Estimating the proportion of variation in susceptibility to multiple sclerosis captured by common SNPs

    Science.gov (United States)

    Watson, Corey T.; Disanto, Giulio; Breden, Felix; Giovannoni, Gavin; Ramagopalan, Sreeram V.

    2012-10-01

    Multiple sclerosis (MS) is a complex disease with underlying genetic and environmental factors. Although the contribution of alleles within the major histocompatibility complex (MHC) are known to exert strong effects on MS risk, much remains to be learned about the contributions of loci with more modest effects identified by genome-wide association studies (GWASs), as well as loci that remain undiscovered. We use a recently developed method to estimate the proportion of variance in disease liability explained by 475,806 single nucleotide polymorphisms (SNPs) genotyped in 1,854 MS cases and 5,164 controls. We reveal that ~30% of MS genetic liability is explained by SNPs in this dataset, the majority of which is accounted for by common variants. These results suggest that the unaccounted for proportion could be explained by variants that are in imperfect linkage disequilibrium with common GWAS SNPs, highlighting the potential importance of rare variants in the susceptibility to MS.

  2. Simultaneous measurement of tritium and radiocarbon by ultra-low-background proportional counting

    Energy Technology Data Exchange (ETDEWEB)

    Mace, Emily; Aalseth, Craig; Alexander, Tom; Back, Henning; Day, Anthony; Hoppe, Eric; Keillor, Martin; Moran, Jim; Overman, Cory; Panisko, Mark; Seifert, Allen

    2017-08-01

    Use of ultra-low-background capabilities at Pacific Northwest National Laboratory provide enhanced sensitivity for measurement of low-activity sources of tritium and radiocarbon using proportional counters. Tritium levels are nearly back to pre-nuclear test backgrounds (~2-8 TU in rainwater), which can complicate their dual measurement with radiocarbon due to overlap in the isotope’s respective energy spectra. This activity makes direct dual-isotope measurements challenging without additional chemistry to concentrate the tritium in a sample. We present results of single-isotope proportional counter measurements used to analyze a dual-isotope methane sample synthesized from ~120 mg of H2O and present sensitivity results.

  3. Proportional Distribution of Patient Satisfaction Scores by Clinical Service

    Directory of Open Access Journals (Sweden)

    Michael S Leonard MD, MS

    2015-11-01

    Full Text Available The Proportional Responsibility for Integrated Metrics by Encounter (PRIME model is a novel means of allocating patient experience scores based on the proportion of each physician's involvement in care. Secondary analysis was performed on Hospital Consumer Assessment of Healthcare Providers and Systems surveys from a tertiary care academic institution. The PRIME model was used to calculate specialty-level scores based on encounters during a hospitalization. Standard and PRIME scores for services with the most inpatient encounters were calculated. Hospital medicine had the most discharges and encounters. The standard model generated a score of 74.6, while the PRIME model yielded a score of 74.9. The standard model could not generate a score for anesthesiology due to the lack of returned surveys, but the PRIME model yielded a score of 84.2. The PRIME model provides a more equitable method for distributing satisfaction scores and can generate scores for specialties that the standard model cannot.

  4. Proportional chamber with 1 mm spacing of the signal wires

    International Nuclear Information System (INIS)

    Balandin, V.P.; Veresh, I.; Gus'kov, B.N.

    1988-01-01

    The construction of a three-coordinate proportional chamber with a 256 x 256 mm working region and with 1.0 and 2.0 mm spacing of the signal wires is described and its characteristics are presented. A charged-particle recording efficiency of 99% was achieved with the gas mixture Ar + 20% C 4 H 10 + 2% C 3 H 8 O 2 + 0.3% CF 3 Br. The plateau on the efficiency curve equaled 750 and greater than 1000 V and the spatial resolution equaled 0.318 and 0.67 mm for planes with spacings of 1 and 2 mm respectively. The effect of proportional chambers on the accuracy with which the coordinates of the vertices of the multitrack events were determined with a BIS-2 spectrometer was studied

  5. The Principle of Proportionality in International Criminal Law

    Directory of Open Access Journals (Sweden)

    Venus GHAREH BAGHI

    2011-11-01

    Full Text Available The principle of proportionality indicated to, are that the criminal codes should contain specific maximums for crime or category of crimes. As to the applicable penalty, should be made distinctive not only between types of crimes but also between completed crimes and inchoate crimes. Unfortunately, the principle of proportionality is not obvious in substantive international law. Although the 1993 draft statute allowed for right of appeal against sentences where there was obvious disproportion between the crime and the sentence. The Tribunals’ Rules of Procedure and Evidence has been given additional directives on sentencing but The ICC Statute, does not provide precise penalties for specific crimes, despite the wide range of offenses and forms of participation that the court is called upon to judge.

  6. MODELLING OF ORDINAL TIME SERIES BY PROPORTIONAL ODDS MODEL

    Directory of Open Access Journals (Sweden)

    Serpil AKTAŞ ALTUNAY

    2013-06-01

    Full Text Available Categorical time series data with random time dependent covariates often arise when the variable categories are assigned as categorical. There are several other models that have been proposed in the literature for the analysis of categorical time series. For example, Markov chain models, integer autoregressive processes, discrete ARMA models can be utilized for modeling of categorical time series. In general, the choice of model depends on the measurement of study variables: nominal, ordinal and interval. However, regression theory is successful approach for categorical time series which is based on generalized linear models and partial likelihood inference. One of the models for ordinal time series in regression theory is proportional odds model. In this study, proportional odds model approach to ordinal categorical time series is investigated based on a real air pollution data set and the results are discussed.

  7. Exact Group Sequential Methods for Estimating a Binomial Proportion

    Directory of Open Access Journals (Sweden)

    Zhengjia Chen

    2013-01-01

    Full Text Available We first review existing sequential methods for estimating a binomial proportion. Afterward, we propose a new family of group sequential sampling schemes for estimating a binomial proportion with prescribed margin of error and confidence level. In particular, we establish the uniform controllability of coverage probability and the asymptotic optimality for such a family of sampling schemes. Our theoretical results establish the possibility that the parameters of this family of sampling schemes can be determined so that the prescribed level of confidence is guaranteed with little waste of samples. Analytic bounds for the cumulative distribution functions and expectations of sample numbers are derived. Moreover, we discuss the inherent connection of various sampling schemes. Numerical issues are addressed for improving the accuracy and efficiency of computation. Computational experiments are conducted for comparing sampling schemes. Illustrative examples are given for applications in clinical trials.

  8. Proportional reasoning as a key to numeracy across the curriculum

    DEFF Research Database (Denmark)

    Hilton, Annette; Hilton, Geoff

    -based learning materials and teaching resources to promote proportional reasoning across all curriculum areas in multiple year levels. These resources are now freely available for teachers beyond the project and the findings have been widely disseminated through journal publications and local and internatinal......Numeracy (mathematical literacy) is an essential skill in life and work. Lack of numeracy has been linked to poor health and work outcomes, and diminished social and civic participation. A key aspect of numeracy, which is not often explicitly mentioned in school curricula, is proportional reasoning...... project responded to these findings through an ongoing professional development program for middle school teachers. A design-based research approach was utilised in which over 120 teachers and school leaders from almost 30 schools participated in multiple workshops over the course of two years (eight half...

  9. DEVELOPMENT OF HETEROGENEOUS PROPORTIONAL COUNTERS FOR NEUTRON DOSIMETRY.

    Science.gov (United States)

    Forouzan, Faezeh; Waker, Anthony J

    2018-01-10

    The use of a custom-made cylindrical graphite proportional counter (Cy-GPC) along with a cylindrical tissue equivalent proportional counter (TEPC) for neutron-gamma mixed-field dosimetry has been studied in the following steps: first, the consistency of the gamma dose measurement between the Cy-TEPC and the Cy-GPC was investigated over a range of 20 keV (X-ray) to 0.661 MeV (Cs-137 gamma ray). Then, with both the counters used simultaneously, the neutron and gamma ray doses produced by a P385 Neutron Generator (Thermo Fisher Scientific) together with a Cs-137 gamma source were determined. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  10. Nonlinear kinematic hardening under non-proportional loading

    International Nuclear Information System (INIS)

    Ottosen, N.S.

    1979-07-01

    Within the framework of conventional plasticity theory, it is first determined under which conditions Melan-Prager's and Ziegler's kinematic hardening rules result in identical material behaviour. Next, assuming initial isotropy and adopting the von Mises yield criterion, a nonlinear kinematic hardening function is proposed for prediction of metal behaviour. The model assumes that hardening at a specific stress point depends on the direction of the new incremental loading. Hereby a realistic response is obtained for general reversed loading, and a smooth behaviour is assured, even when loading deviates more and more from proportional loading and ultimately results in reversed loading. The predictions of the proposed model for non-proportional loading under plane stress conditions are compared with those of the classical linear kinematic model, the isotropic model and with published experimental data. Finally, the limitations of the proposaed model are discussed. (author)

  11. New proportional counter assembly in Gliwice 14C laboratory

    International Nuclear Information System (INIS)

    Moscicki, W.; Zastawny, A.

    1977-01-01

    The design and parameters are described of a proportional counter for low level counting. The cathode tube 80 mm in diameter and 30 cm in length is made of pure copper. The anode is a tungsten wire 0.05 mm in diameter. The cathode tube is surrounded by a cylindrical ring container with mercury. The total volume of the counter is 1.5 l and it is filled with carbon dioxide. At a pressure of 1 at of CO 2 the counter background is 4.20+-0.05 cpm and contemporary 14 C net effect 10.22+-0.10 cpm; at a pressure of 2 at of CO 2 the background is 4.40+-0.05 cpm and the contemporary 14 C net effect 20.53+-10 cpm. The efficiency of the proportional counter is 88% in both cases. (J.B.)

  12. Constitutional Model and Rationality in Judicial Decisions from Proportionality Technique

    OpenAIRE

    Feio, Thiago Alves

    2016-01-01

    In the current legal systems, the content of the Constitutions consists of values that serve to limit state action. The department in charge of the control of this system is, usually, the Judiciary. This choice leads to two major problems, the tension between democracy and constitutionalism and the subjectivity that control. One of the solutions to subjectivity is weighting of principles through the proportionality technique, which aims to give rational decisions. This technique doesn’t elimi...

  13. Data-driven smooth tests of the proportional hazards assumption

    Czech Academy of Sciences Publication Activity Database

    Kraus, David

    2007-01-01

    Roč. 13, č. 1 (2007), s. 1-16 ISSN 1380-7870 R&D Projects: GA AV ČR(CZ) IAA101120604; GA ČR(CZ) GD201/05/H007 Institutional research plan: CEZ:AV0Z10750506 Keywords : Cox model * Neyman's smooth test * proportional hazards assumption * Schwarz's selection rule Subject RIV: BA - General Mathematics Impact factor: 0.491, year: 2007

  14. Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics)

    OpenAIRE

    Brandão,Roberto Carlos Bodart; Brandão,Larissa Bustamente Capucho

    2013-01-01

    OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics) and its correlation with the periodontium (pink esthetics). Standards of normality are described both in their real dimensions (dental height and width), and in those effectively perceived by the observer, the vi...

  15. Sur l'utilité de la carte en proportions

    Directory of Open Access Journals (Sweden)

    Isabelle DEBEER

    1996-03-01

    Full Text Available Seule la carte en proportions révèle des répartitions de masses. Cette règle élémentaire de cartographie est rappelée ici par un exemple opérationnel: la répartition spatiale des logements chauffés à l'énergie solaire en Belgique.

  16. Proportion and Factors Associated with late Antenatal Care Booking ...

    African Journals Online (AJOL)

    AJRH Managing Editor

    grossesse est l'une des mesures de la performance clinique standard pour évaluer la qualité des soins de santé maternelle. Visant à évaluer la proportion et les facteurs associés à la réservation tardive pendant les soins prénatals, cette étude transversale basée sur la santé des ..... Determinants of late booking at ANC.

  17. The evolution of human and ape hand proportions

    OpenAIRE

    Alm?cija, Sergio; Smaers, Jeroen B.; Jungers, William L.

    2015-01-01

    Human hands are distinguished from apes by possessing longer thumbs relative to fingers. However, this simple ape-human dichotomy fails to provide an adequate framework for testing competing hypotheses of human evolution and for reconstructing the morphology of the last common ancestor (LCA) of humans and chimpanzees. We inspect human and ape hand-length proportions using phylogenetically informed morphometric analyses and test alternative models of evolution along the anthropoid tree of life...

  18. Proportional drift tubes for large area muon detectors

    Science.gov (United States)

    Cho, C.; Higashi, S.; Hiraoka, N.; Maruyama, A.; Okusawa, T.; Sato, T.; Suwada, T.; Takahashi, T.; Umeda, H.

    1985-01-01

    A proportional drift chamber which consists of eight rectangular drift tubes with cross section of 10 cm x 5 cm, a sense wire of 100 micron phi gold-plated tungsten wire and the length of 6 m, was tested using cosmic ray muons. Spatial resolution (rms) is between 0.5 and 1 mm over drift space of 50 mm, depending on incident angle and distance from sense wire.

  19. Metrology and Proportion in the Ecclesiastical Architecture of Medieval Ireland

    OpenAIRE

    Behan, Avril; Moss, Rachel

    2008-01-01

    The aim of this paper is to examine the extent to which detailed empirical analysis of the metrology and proportional systems used in the design of Irish ecclesiastical architecture can be analysed to provide historical information not otherwise available. Focussing on a relatively limited sample of window tracery designs as a case study, it will first set out to establish what, if any, systems were in use, and then what light these might shed on the background, training and work practices of...

  20. Proportion of neural tube defects attributable to known risk factors.

    Science.gov (United States)

    Agopian, A J; Tinker, Sarah C; Lupo, Philip J; Canfield, Mark A; Mitchell, Laura E

    2013-01-01

    Recognized risk factors for neural tube defects (NTDs) poorly predict population-level NTD risk. However, the proportion of NTDs that can be attributed to these risk factors is uncertain. To determine the proportion of NTD cases that is attributable to known or suspected risk factors (i.e., female infant sex, family history of NTDs, and maternal Hispanic ethnicity, obesity, pregestational diabetes, gestational diabetes, low dietary folate intake, lack of folic acid supplementation, anticonvulsant use, and hot tub or sauna use), we estimated the adjusted population attributable fraction (aAF) for each factor, using the method of Eide and Geffler and data from the National Birth Defects Prevention Study. Our analyses of these data indicate that the proportion of cases of spina bifida and anencephaly that can be attributed to known risk factors is 28% and 44%, respectively. For spina bifida, the factor with the greatest attributable fraction was maternal obesity (aAF, 10%), whereas for anencephaly it was Hispanic ethnicity (aAF, 15%). Our analyses indicate that known risk factors account for <50% of NTD cases. Hence, the majority of NTD cases are attributable to, as yet, unidentified factors. These findings highlight the need for continued research to identify genetic and additional nongenetic risk factors for NTDs. Further, these findings suggest that strategies that aim to reduce the risk of NTDs associated with maternal Hispanic ethnicity and obesity may have the greatest impact on the population prevalence of these conditions.

  1. An extended parametrization of gas amplification in proportional wire chambers

    International Nuclear Information System (INIS)

    Beingessner, S.P.; Carnegie, R.K.; Hargrove, C.K.

    1987-01-01

    It is normally assumed that the gas amplification in proportional chambers is a function of Townsend's first ionization coefficient, α, and that α is a function of the anode surface electric field only. Experimental measurements are presented demonstrating the breakdown of the latter assumption for electric fields, X, greater than about 150 V/cm/Torr on the anode wire surface for a gas mixture of 80/20 argon/methane. For larger values of X, the parametrization of the proportional gas gain data requires an additional term related to the gradient of the electric field near the wire. This extended gain parametrization remains valid until the onset of nonproportional contributions such as positive ion space charge saturation effects. Furthermore, deviations of the data from this parametrization are used to measure the onset of these space charge effects. A simple scaling dependence of the gain data on the product of pressure and wire radius over the whole proportional range is also demonstrated. (orig.)

  2. Proportionality in enterprise development of South African towns

    Directory of Open Access Journals (Sweden)

    Maitland T. Seaman

    2012-05-01

    Full Text Available We investigated proportionalities in the enterprise structures of 125 South African towns through examining four hypotheses, (1 the magnitude of enterprise development in a town is a function of the population size of the town; (2 the size of an enterprise assemblage of a town is a function of the town’s age; (3 there are statistically significant relationships, and hence proportionalities, between the total number of enterprises in towns and some, if not all, of the enterprise numbers of different business sectors in towns; and (4 the implications of proportionalities have far-reaching implications for rural development and job creation. All hypotheses were accepted on the basis of statistically significant (p < 0.05 correlations, except for the second hypothesis – the age of a town does not determine the size of its enterprise assemblage. Analysis for the fourth hypothesis suggested that there are two broad entrepreneurial types in South African towns: ‘run-of-the-mill’ entrepreneurs and ‘special’ entrepreneurs, which give rise to different enterprise development dynamics. ‘Run-of-the-mill’ enterprises are dependent on, and limited by, local demand and if there is only a small demand, the entrepreneurial space is small. By comparison, ‘special’ enterprises have much larger markets because their products and/or services are exportable. We propose that the fostering of ‘special’ entrepreneurs is an imperative for local economic development in South African towns.

  3. OUTPUT CONTROL WITH ADAPTIVE-PROPORTIONAL DIFFERENTIAL CONTROLLER

    Directory of Open Access Journals (Sweden)

    O. F. Opeiko

    2016-01-01

    Full Text Available The goal of this articl is to improve acсuracy and stability margine for system with proportional differential (PD-controllers and parameters unsertaity by means of adaptation. The adaptive controller must produce the accuraсy improving by encreasing the proportional gain of controller, when the error is non zero. Consequently, the error decrease, adaptation become less intensive, and the system maintain the stability. The is provided by the correctly constructed Lapunov function. The method of parametric synthesis for adaptive PD-controller is developed based on roots location on complex plane. The numerical example of synthesis is presented with simulation results, which demonstrate the correctness of developed method. The adaptive PD-controller allow accuracy improuving with stability retaining, i. e. the adaptivity is able to replace the integrator by proportional gain tuning. The adaptive PD-controller is especially helpful for systems, working with inputs variability, and when the exponential dynamic is of importance. In cases, when diturbances are restricted, the adaptive PD-controller provides the stability and accuracy, but slowly operation.

  4. Is proportion burned severely related to daily area burned?

    International Nuclear Information System (INIS)

    Birch, Donovan S; Morgan, Penelope; Smith, Alistair M S; Kolden, Crystal A; Hudak, Andrew T

    2014-01-01

    The ecological effects of forest fires burning with high severity are long-lived and have the greatest impact on vegetation successional trajectories, as compared to low-to-moderate severity fires. The primary drivers of high severity fire are unclear, but it has been hypothesized that wind-driven, large fire-growth days play a significant role, particularly on large fires in forested ecosystems. Here, we examined the relative proportion of classified burn severity for individual daily areas burned that occurred during 42 large forest fires in central Idaho and western Montana from 2005 to 2007 and 2011. Using infrared perimeter data for wildfires with five or more consecutive days of mapped perimeters, we delineated 2697 individual daily areas burned from which we calculated the proportions of each of three burn severity classes (high, moderate, and low) using the differenced normalized burn ratio as mapped for large fires by the Monitoring Trends in Burn Severity project. We found that the proportion of high burn severity was weakly correlated (Kendall τ = 0.299) with size of daily area burned (DAB). Burn severity was highly variable, even for the largest (95th percentile) in DAB, suggesting that other variables than fire extent influence the ecological effects of fires. We suggest that these results do not support the prioritization of large runs during fire rehabilitation efforts, since the underlying assumption in this prioritization is a positive relationship between severity and area burned in a day. (letters)

  5. Duality between resource reservation and proportional share resource allocation

    Science.gov (United States)

    Stoica, Ion; Abdel-Wahab, Hussein; Jeffay, Kevin

    1997-01-01

    We describe anew framework for resource allocation that unifies the well-known proportional share and resource reservation policies. Each client is characterized by two parameters: a weight that represents the rate at which the client 'pays' for the resource, and a share that represents the fraction of the resource that the client should receive. A fixed rate corresponds to a proportional share allocation, while a fixed share corresponds to a reservation. Furthermore, rates and shares are duals of each other. Once one parameters is fixed the other becomes fixed as well. If a client asks for a fixed share then the level of competition for the resource determines the rate at which it has to pay, while if the rate is fixed, level of competition determines the service time the clients should receive. To implement this framework we use a new proportional share algorithm, called earliest eligible virtual deadline first, that achieves optical accuracy in the rates at which process execute. This makes it possible to provide support for highly predictable, real-time services. As a proof of concept we have implemented a prototype of a CPU scheduler under the FreeBSD operating system. The experimental results show that our scheduler achieves the goal of providing integrated support for batch and real-time applications.

  6. Energy Proportionality and Performance in Data Parallel Computing Clusters

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinoh; Chou, Jerry; Rotem, Doron

    2011-02-14

    Energy consumption in datacenters has recently become a major concern due to the rising operational costs andscalability issues. Recent solutions to this problem propose the principle of energy proportionality, i.e., the amount of energy consumedby the server nodes must be proportional to the amount of work performed. For data parallelism and fault tolerancepurposes, most common file systems used in MapReduce-type clusters maintain a set of replicas for each data block. A coveringset is a group of nodes that together contain at least one replica of the data blocks needed for performing computing tasks. In thiswork, we develop and analyze algorithms to maintain energy proportionality by discovering a covering set that minimizesenergy consumption while placing the remaining nodes in lowpower standby mode. Our algorithms can also discover coveringsets in heterogeneous computing environments. In order to allow more data parallelism, we generalize our algorithms so that itcan discover k-covering sets, i.e., a set of nodes that contain at least k replicas of the data blocks. Our experimental results showthat we can achieve substantial energy saving without significant performance loss in diverse cluster configurations and workingenvironments.

  7. Position sensitive proportional counter for measurement of tritium labelled gas movement

    International Nuclear Information System (INIS)

    Mori, Chizuo; Nakamoto, Makihiko; Uritani, Akira; Watanabe, Tamaki

    1984-01-01

    A position sensitive proportional counter of a charge division type with a single resistive anode wire was constructed for the measurement of the movement of 3 H labelled gas which is flowing or diffusing in a pipe. The introduction of resistors between the anode wire and pre-amplifiers brought a uniform detection efficiency for 3 H β-rays throughout the counter. The position resolution was 3.1 mm FWHM. Detection efficiency was almost 100% uniformly over about 700 mm in the total anode length of 740 mm. The movement of 3 H labelled gas could be measured effectively. (author)

  8. Experimental examination for microcrack lifetime calculation under proportionally multiaxial fatigue loading with constant and variable amplitudes

    International Nuclear Information System (INIS)

    Savaidis, G.; Seeger, T.

    1994-01-01

    Basic experimental examinations were performed in the frame of this work, for determining the deformation and failure behaviour of metallic materials at multiaxially proportional fatigue loading with variable amplitudes, using the materials StE 460 and AlMg4.5Mn. With the help of deformation controlled, varying single stage Woehler tests with Hour-glass and thin-walled tube specimens, applying pure normal force, pure torsion and composed normal force and torsion, the cyclic deformation behaviour, incipient cracking and crack opening and crack growth behaviour of the materials was examined. (orig.) [de

  9. High proportion of male faeces in jaguar populations.

    Directory of Open Access Journals (Sweden)

    Francisco Palomares

    Full Text Available Faeces provide relevant biological information which includes, with the application of genetic techniques, the sex and identity of individuals that defecated, thus providing potentially useful data on the behaviour and ecology of individuals, as well as the dynamics and structure of populations. This paper presents estimates of the sex ratio of different felid species (jaguar, Panthera onca; puma, Puma concolor; and ocelot/margay, Leopardus pardalis/Leopardus wiedi as observed in field collected faeces, and proposes several hypotheses that could explain the strikingly high proportion of faeces from male jaguars. The proportion of male and female faeces was estimated using a non-invasive faecal sampling method in 14 study areas in Mexico and Brazil. Faecal samples were genetically analysed to identify the species, the sex and the individual (the latter only for samples identified as belonging to jaguars. Considering the three species, 72.6% of faeces (n = 493 were from males; however, there were significant differences among them, with the proportion from males being higher for jaguars than for pumas and ocelots/margays. A male-bias was consistently observed in all study areas for jaguar faeces, but not for the other species. For jaguars the trend was the same when considering the number of individuals identified (n = 68, with an average of 4.2±0.56 faeces per male and 2.0±0.36 per female. The observed faecal marking patterns might be related to the behaviour of female jaguars directed toward protecting litters from males, and in both male and female pumas, to prevent interspecific aggressions from male jaguars. The hypothesis that there are effectively more males than females in jaguar populations cannot be discarded, which could be due to the fact that females are territorial and males are not, or a tendency for males to disperse into suboptimal areas for the species.

  10. PRINCIPLE OF PROPORTIONALITY, CRITERION OF LEGITIMACY IN THE PUBLIC LAW

    Directory of Open Access Journals (Sweden)

    MARIUS ANDREESCU

    2011-04-01

    Full Text Available A problem of essence of the state is the one to delimit the discretionary power, respectively the power abuse in the activity of the state’s institutions. The legal behavior of the state’s institutions consists in their right to appreciate them and the power excess generates the violation of a subjective right or of the right that is of legitimate interest to the citizen. The application and nonobservance of the principle of lawfulness in the activities of the state is a complex problem because the exercise of the state’s functions assumes the discretionary powers with which the states authorities are invested, or otherwise said the ‘right of appreciation” of the authorities regarding the moment of adopting the contents of the measures proposed. The discretionary power cannot be opposed to the principle of lawfulness, as a dimension of the state de jure. In this study we propose to analyze the concept of discretionary power, respectively the power excess, having as a guidance the legislation, jurisprudence and doctrine in the matter. At the same time we would like to identify the most important criterions that will allow the user, regardless that he is or not an administrator, a public clerk or a judge, to delimit the legal behavior of the state’s institutions from the power excess. Within this context, we appreciate that the principle of proportionality represents such a criterion. The proportionality is a legal principle of the law, but at the same time it is a principle of the constitutional law and of other law branches. It expresses clearly the idea of balance, reasonability but also of adjusting the measures ordered by the state’s authorities to the situation in fact, respectively to the purpose for which they have been conceived. In our study we choose theoretical and jurisprudence arguments according to which the principle of proportionality can procedurally be determined and used to delimit the discretionary power and

  11. Average and Asymptotic Properties of Apportionment Methods for Proportional Representation

    OpenAIRE

    Schwingenschlögl, Udo

    2006-01-01

    Because in democratic systems the electoral outcome decides on the line of future policy, the process of voting is of great importance for society. In general, an election consists of two parts, both influencing its result. In the first step, each voter gives his vote to one of the parties participating in the election. The numbers of votes in favor of the competing parties then give rise to vote proportions, which specify the share of voters supporting a party. In the second step, almost con...

  12. Multiwire proportional chamber spectrometer for the CERN Intersecting Storage Rings

    International Nuclear Information System (INIS)

    Baksay, L.; Boehm, A.; Foeth, H.; Staude, A.; Bozzo, M.; Ellis, R.; Naroska, B.; Rubbia, C.; Strolin, P.

    1976-01-01

    The design, construction and performance of a multiwire proportional chamber (MWPC) system (approximately 10 k wires) constructed for use at the CERN Intersecting Storage Rings (ISR) is described. This system employs hybrid integrated circuitry for pulse detection and storage, and is read via a CAMAC compatible system. The chambers plus two large-aperture magnets with accompanying scintillation and Cherenkov counters form a versatile multiparticle spectrometer system which has been used to investigate particle systems produced near 0 0 at the CERN ISR. (Auth.)

  13. New Bi-Proportional Methods for Bulgarian Parliamentary Elections

    Science.gov (United States)

    Konstantinov, Mihail; Yanev, Kostadin; Pelova, Galina

    2010-10-01

    A disadvantage of the existing bi-proportional system for the Bulgarian parliamentary elections is the large number of discordances (a party list with less votes gets more seats than a party list with more votes) in the seat distributions. Different schemes has been proposed to deal with this phenomenon. In this paper we propose two new methods: 1) augmentation of the electoral regions and 2) introduction of a new electoral region for accounting the votes cast abroad. In this way the number of discordances may be vastly reduced.

  14. A versatile gas-flow proportional counter for Moessbauer spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bibicu, I., E-mail: bibicu@infim.ro [National Institute for Materials Physics (Romania); Nicolescu, G. [IFIN-HH, National Institute of Physics and Nuclear Engineering (Romania); Cretu, C. [Transylvania University, Physics Department (Romania)

    2009-07-15

    This article presents a versatile gas-flow proportional counter for surface and transmission Moessbauer spectroscopy, suitable for studies with {sup 57}Fe, {sup 119}Sn and {sup 151}Eu isotopes. The main advantages obtained by new design are: (1) the height of the detection volume can be changed in large limits from 0 to 38 mm, (2) the detection volume can be choose symmetrical or not in respect with anode plan, (3) the anode replacement is easily (4) and different anode configuration can be used. The characteristics of the detector, operating at room temperature, are reported.

  15. Constant Proportion Portfolio Insurance Strategies in Contagious Markets

    DEFF Research Database (Denmark)

    Buccioli, Alice; Kokholm, Thomas

    2018-01-01

    charging and for risk management. The literature on CPPI modeling typically assumes diffusive or Lévy-driven dynamics for the risky asset underlying the strategy. In either case the self-contagious nature of asset prices is not taken into account. In order to account for contagion while preserving......Constant Proportion Portfolio Insurance (CPPI) strategies are popular as they allow to gear up the upside potential of a stock index while limiting its downside risk. From the issuer's perspective it is important to adequately assess the risks associated with the CPPI, both for correct "gap'' fee...

  16. Golden Proportion in Frontal Social Smile from Orthodontic Viewpoint

    Directory of Open Access Journals (Sweden)

    z Tabatabaei

    2011-09-01

    Full Text Available Introduction: Physical attraction has a significant effect on all aspects of personal life, and in this category facial appearance is the most important part of the body in prediction of attractiveness. In the face, mouth and specially shape and size of anterior teeth is important to gain dental and facial esthetic. The aim of this study is evaluation of golden proportion from orthodontic view in maxillary anterior teeth in both sexes. Methods: Considering inclusion and exclusion criteria, 100 students of Rafsanjan University of Medical Sciences were selected, and photographs of their frontal social smile were taken by a standard method from 30cm distance. Then visible part of central, lateral and canine teeth was measured by Photoshop software (Adobe Photoshop ver8 with 0.1mm precision. Data was evaluated by descriptive statistical analysis and sample T-test using SPSS. Results: According to descriptive statistical analysis and sample T- test, mean ratio of central to lateral teeth in the left side in men and women was 1.209±0.199 and 1.157±0.156 and in the right side in men and women was 1.179± 0.27 and 1.158± 0.145, respectively. The ratio of lateral to canine teeth in the left side in men and women was 1.522±0.146 and 1.494±0.127 and in the right side in men and women was 1.55±0.164 and 1.51±0.114, respectively. Golden proportion was seen between central and lateral teeth in 16% in the right side and 3.4% in the left side only in men. Conclusion: Golden proportion was seen between central and lateral in the left side and right side in men, but due to large canine in men, this proportion was not seen between lateral and canine teeth and so due to small lateral in women, it was not seen between anterior teeth.

  17. The study of the physical characteristics of men through proportionality

    Directory of Open Access Journals (Sweden)

    Ciro Romelio Rodriguez-Añez

    2002-12-01

    Full Text Available The study of the physical characteristics of humans has been a concern throughout history. Proportionality is of interest for several reasons that range from the selection of sport talents to esthetic issues. The aim of this paper is to investigate the procedures for proportionality analysis in the existing literature. First a brief history is provided of the background that lead to the development of procedures such as the ponderal index, body mass index, skeletal index, cormic index, upper member length index, acromio-iliac index and relative span index. Procedures for studying human proportionality, such as the Phantom index, the O-Scale and allometry are then investigated. The literature investigated led to the conclusion that studies in human proportionality should continue to strive to develop better procedures for describing human beings in a global manner, leading to a description realistic more of the human form. RESUMO O estudo das características físicas do homem tem sido uma preocupação constante ao longo dos tempos. A proporcionalidade desperta interesse por diversos motivos que vão desde a seleção de talentos esportivos até por motivos puramente estéticos. O objetivo deste trabalho consiste em investigar na literatura existente os procedimentos para a análise da proporcionalidade. Para tal, realizou-se um breve histórico dos antecedentes que levaram ao desenvolvimento de procedimentos como o índice ponderal, o índice de massa corporal, o índice esquelético, índice córmico, índice do comprimento do membro superior, índice acrômio-ilíaco e o índice da envergadura relativa. Posteriormente verifi caram-se os procedimentos para o estudo da proporcionalidade humana como o índice Phantom, a escala “O” e a alometria. A revisão do material bibliográfi co permite concluir que os estudos da proporcionalidade humana devem continuar no sentido de desenvolver um método que descreva melhor o ser humano de uma forma

  18. A multiwire proportional counter for very high counting rates

    International Nuclear Information System (INIS)

    Barbosa, A.F.; Guedes, G.P.; Tamura, E.; Pepe, I.M.; Oliveira, N.B.

    1997-12-01

    Preliminary measurements in a proportional counter with two independently counting wires showed that counting rates up to 10 6 counts/s per wire can be reached without critical loss in the true versus measured linearity relation. Results obtained with a detector containing 30 active wires (2 mm pitch) are presented. To each wire is associated a fast pre-amplifier and a discriminator channel. Global counting rates in excess to 10 7 events/s are reported. Data acquisition systems are described for 1D (real time) and 2D (off-line) position sensitive detection systems. (author)

  19. A multiwire proportional counter for very high counting rates

    International Nuclear Information System (INIS)

    Barbosa, A.F.; Guedes, G.P.; Tamura, E.; Cardoso, M.R.; Pepe, I.M.; Oliveira, N.B.

    1997-01-01

    Full text. In order to obtain high counting rates with a gas detector, it is showed that a proportional counter with two independently counting wires can reach up to 10 6 counts/s per wire, without critical loss in the 'true versus measured' linearity relation. Results obtained with a detector containing 30 active wires (2 mm pitch) are presented. To each wire is associated a fast pre-amplifier and a discriminator channel. Global counting rates in excess to 10 7 events/s are reported. Data acquisition systems are described for 1D (real time) and 2D (off-line) position sensitive detection systems. (author)

  20. PERFORMANCE COMPARISON BETWEEN FUZZY CONTROLLERS AND PROPORTIONAL CONTROLLERS

    OpenAIRE

    Sergio L. Martínez; Enrique E. Tarifa; Álvaro F. Núñez

    2012-01-01

    The aim of this work is to compare the performance of two fuzzy controllers and a proportional controller. The controlled variable is the level of a tank with gravity discharge. For the study, a dynamic simulator was developed and implemented in Simulink ® of MATLAB ®. For each studied controller, the response produced by a step change in the set point was evaluated. To make a valid comparison, the controllers were adjusted to produce equal offsets. The results show that systems based on heur...

  1. A multiwire proportional counter for tritium and radiocarbon measurements

    International Nuclear Information System (INIS)

    Srdoc, D.; Planinic, J.; Obelic, B.

    1977-01-01

    A wall-less proportional counter for tritium and 14 C measurements is described. The device consists of a central counter surrounded by a ring of 16 counters. There is no wall between the counters and the whole volume is filled with the gas to be measured. A special arrangement of anode connections helps to distinguish the pulses due to sample activity and those due to background. Further reduction of background was achieved by summing up coincident pulses and rejecting those above the chosen level, which gives the optimal sample count to background ratio. (author)

  2. Energy resolution limitations in a gas scintillation proportional counter

    International Nuclear Information System (INIS)

    Simons, D.G.; de Korte, P.A.J.; Peacock, A.; Bleeker, J.A.M.

    1985-01-01

    An investigation is made of the factors limiting the energy resolution of a gas scintillation proportional counter (GSPC). Several of these limitations originate in the drift region of such a counter and data is presented, giving a quantitative description of those effects. Data is also presented of a GSPC without a drift region, that therefore largely circumvents most of those degrading factors. The results obtained so far indicate that in that detector the limitation to the resolution is most probably due to cleanliness of the gas. Further research is underway in order to assess quantitatively the limiting factors in such a driftless GSPC

  3. Fiber Contraction Approaches for Improving CMC Proportional Limit

    Science.gov (United States)

    DiCarlo, James A.; Yun, Hee Mann

    1997-01-01

    The fact that the service life of ceramic matrix composites (CMC) decreases dramatically for stresses above the CMC proportional limit has triggered a variety of research activities to develop microstructural approaches that can significantly improve this limit. As discussed in a previous report, both local and global approaches exist for hindering the propagation of cracks through the CMC matrix, the physical source for the proportional limit. Local approaches include: (1) minimizing fiber diameter and matrix modulus; (2) maximizing fiber volume fraction, fiber modulus, and matrix toughness; and (3) optimizing fiber-matrix interfacial shear strength; all of which should reduce the stress concentration at the tip of cracks pre existing or created in the matrix during CMC service. Global approaches, as with pre-stressed concrete, center on seeking mechanisms for utilizing the reinforcing fiber to subject the matrix to in-situ compressive stresses which will remain stable during CMC service. Demonstrated CMC examples for the viability of this residual stress approach are based on strain mismatches between the fiber and matrix in their free states, such as, thermal expansion mismatch and creep mismatch. However, these particular mismatch approaches are application limited in that the residual stresses from expansion mismatch are optimum only at low CMC service temperatures and the residual stresses from creep mismatch are typically unidirectional and difficult to implement in complex-shaped CMC.

  4. On timing properties of the SRPO-304 proportional counters

    International Nuclear Information System (INIS)

    Gusev, A.A.; Pugacheva, G.I.

    1979-01-01

    Data of measurements of the signal delay time and the time of development of the discharge in a proportional counter filled with 90% Xe + 10% CH 4 mixture at 0.3 atm are presented. The measurements were carried out on muons of cosmic rays. Signal delay distribution for the proportional counter are given relative to the time of passage through it of a charged particle. The data obtained shows that the average delay time is 0.8 μs when a particle passes near the counter centre, whereas when it passes near its side wall the average delay time is 1.5 μs. The investigation of the discharge development time distribution was carried out for two values of the discriminator threshold: 6 and 20 keV. It was determined that the discharge development time distribution depends but little on the place of particle passage in a counter. The average discharge development time is 1.5 μs, with the maximum time beina 4.3 μs. It is shown that the resolution time of logical circuits will be near 4 μs when the counter is combined with scintillation detectors

  5. The arcsine is asinine: the analysis of proportions in ecology.

    Science.gov (United States)

    Warton, David I; Hui, Francis K C

    2011-01-01

    The arcsine square root transformation has long been standard procedure when analyzing proportional data in ecology, with applications in data sets containing binomial and non-binomial response variables. Here, we argue that the arcsine transform should not be used in either circumstance. For binomial data, logistic regression has greater interpretability and higher power than analyses of transformed data. However, it is important to check the data for additional unexplained variation, i.e., overdispersion, and to account for it via the inclusion of random effects in the model if found. For non-binomial data, the arcsine transform is undesirable on the grounds of interpretability, and because it can produce nonsensical predictions. The logit transformation is proposed as an alternative approach to address these issues. Examples are presented in both cases to illustrate these advantages, comparing various methods of analyzing proportions including untransformed, arcsine- and logit-transformed linear models and logistic regression (with or without random effects). Simulations demonstrate that logistic regression usually provides a gain in power over other methods.

  6. Derivation of a simple analytical expression of the gain of pure argon filled CAT proportional counters

    CERN Document Server

    Chaplier, G; Megtert, S

    2000-01-01

    In previous publications, we described the intrinsic properties of CAT detectors, formed as a unique or a collection of individual single holes (gas proportional pixel detector). In our last paper, we have shown that the calculated gain of the avalanche along the electric field lines was dependent on the distance of photon absorption with respect to the symmetry axis of a single hole. On the contrary, the measured gain did not follow this dependence and it was suggested that the gain of the detector was similar to the one measured along the hole symmetry axis, irrespective of the shape of the off-axis electric field lines. We present here a simple calculation of the on-axis gain of such structures that corresponds to the measurements and takes into account the detector geometry.

  7. Measurement of the proportion of plasma purine derivatives excreted in the urine of sheep

    International Nuclear Information System (INIS)

    Prasitkusol, P.; Chen, X.B.; Kyle, D.J.; Oerskov, E.R.

    1999-01-01

    Four sheep were used to measure the proportion of plasma allantoin excreted in the urine at three levels of intake. The sheep were fed a mixed ration at 800, 1200 and 1600 g air dry matter per animal/d during three periods, using an incomplete Latin Square design. Each period consisted of 10-days adaptation and 7-days measurement. After the adaptation, each animal was injected via a jugular catheter, a single dose of 30 μCi of 4,5- 14 C-allantoin as a tracer. Urine collection was made 5 days before tracer injection and until 7 days after tracer injection. Plasma samples were taken at different intervals after the tracer injection. The proportion of plasma allantoin which is excreted in the urine was measured as the recovery of dosed 14 C-allantoin in the urine. Glomerular filtration rate (GFR) was estimated from creatinine clearance. There was no significant difference in the recovery of plasma allantoin between levels of intake but there was a considerable variation (P 0.75 /day in the four sheep, respectively). GFR tended to increased with feed intake. However, variation in GFR in the same animal did not seem to affect the proportion of plasma allantoin excretion. (author)

  8. Large differences in proportions of harmful and benign amino acid substitutions between proteins and diseases.

    Science.gov (United States)

    Schaafsma, Gerard C P; Vihinen, Mauno

    2017-07-01

    Genes and proteins are known to have differences in their sensitivity to alterations. Despite numerous sequencing studies, proportions of harmful and harmless substitutions are not known for proteins and groups of proteins. To address this question, we predicted the outcome for all possible single amino acid substitutions (AASs) in nine representative protein groups by using the PON-P2 method. The effects on 996 proteins were studied and vast differences were noticed. Proteins in the cancer group harbor the largest proportion of harmful variants (42.1%), whereas the non-disease group of proteins not known to have a disease association and not involved in the housekeeping functions had the lowest number of harmful variants (4.2%). Differences in the proportions of the harmful and benign variants are wide within each group, but they still show clear differences between the groups. Frequently appearing protein domains show a wide spectrum of variant frequencies, whereas no major protein structural class-specific differences were noticed. AAS types in the original and variant residues showed distinctive patterns, which are shared by all the protein groups. The observations are relevant for understanding genetic bases of diseases, variation interpretation, and for the development of methods for that purpose. © 2017 Wiley Periodicals, Inc.

  9. Imaging performance of a multiwire proportional-chamber positron camera

    International Nuclear Information System (INIS)

    Perez-Mandez, V.; Del Guerra, A.; Nelson, W.R.; Tam, K.C.

    1982-08-01

    A new design - fully three-dimensional - Positron Camera is presented, made of six MultiWire Proportional Chamber modules arranged to form the lateral surface of a hexagonal prism. A true coincidence rate of 56000 c/s is expected with an equal accidental rate for a 400 μCi activity uniformly distributed in a approx. 3 l water phantom. A detailed Monte Carlo program has been used to investigate the dependence of the spatial resolution on the geometrical and physical parameters. A spatial resolution of 4.8 mm FWHM has been obtained for a 18 F point-like source in a 10 cm radius water phantom. The main properties of the limited angle reconstruction algorithms are described in relation to the proposed detector geometry

  10. Golden proportion: do divino à medicina dentária

    OpenAIRE

    Messias, Fernando José Santiago

    2013-01-01

    Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz Introdução: Na natureza, na arte e na vida, existe um princípio comum. Uma proporção mágica que define o que é agradável: A proporção áurea ou golden proportion. (Paul M. M. C. & Abraham S. T., 2013) Desde os primeiros matemáticos como Fibonacci, passando por antigos artistas e pintores como Pablo Picasso e inventores como Leonardo Da Vinci até à Medicina do presente, a proporção áurea tem lev...

  11. Mixtures of organic and inorganic substrates, particle size and proportion

    International Nuclear Information System (INIS)

    Morales-Maldonado, Emilio Raymundo; Casanova-Lugo, Fernando

    2015-01-01

    The mixtures of organic and inorganic materials used in the preparation of a new material, particle size, proportion and their response in plant were reviewed. Agricultural wastes are considered a pollutant reservoir in Mexico; however, for another perspective this represent an industry with great potential. The nutrients ingested by animals represent nutriments available for plants when properly recycled. The production of compost and vermicompost is an option that minimize the risk of contamination and improve quality. Both processes are an alternative for organic production. The efficiency of irrigation and fertilization are affected for the reducing the volumen of an organic material incresase compaction and compression of roots. The mixtures with inorganic materials are used in the development of a new material to obtain better growing conditions for the plant. (author) [es

  12. The suppression of destructive sparks in parallel plate proportional counters

    Energy Technology Data Exchange (ETDEWEB)

    Cockshott, R.A.; Mason, I.M.

    1984-02-01

    The authors find that high energy background events produce localised sparks in parallel plate counters when operated in the proportional mode. These sparks increase dead-time and lead to degradation ranging from electrode damage to spurious pulsing and continuous breakdown. The problem is particularly serious in low energy photon detectors for X-ray astronomy which are required to have lifetimes of several years in the high radiation environment of space. For the parallel plate imaging detector developed for the European X-ray Observatory Satellite (EXOSAT) they investigate quantitatively the spark thresholds, spark rates and degradation processes. They discuss the spark mechanism, pointing out differences from the situation in spark chambers and counters. They show that the time profile of the sparks allows them to devise a spark suppression system which reduces the degradation rate by a factor of ''200.

  13. Application of multiwire proportional chamber in BEPC test beam

    International Nuclear Information System (INIS)

    Shen Ji; Chen Ziyu; Ye Yunxiu; Cuiu Xiangzong; Li Jiacai

    2006-01-01

    This paper describes a Multiwire Proportional Chamber (MWPC) for the Test Beam on BEPC (Beijing Electron Positron Colider). The distance between the anode surface and the cathode surface of the MWPC is 6 mm. Both surfaces are made of gold-plated tungsten wires, the anode wires are 20 μm in diameter and 2 mm apart, and the cathode wires are 50 μm indiameter and 0.7 mm apart. Six adjacent wires are connected together to form a 4.2 mm wide cathode strip. The MWPC can localize the particles of e, π by cathode-induced charge centre-of-gravity read-out. For 5.9 keV γ photon, the positional resolution is less than 0.3 mm (FWHM) and for 1.1 GeV beam electron, 0.224 mm (FWHM) positional resolution is attained. (authors)

  14. Mixtures of organic and inorganic substrates, particle size and proportion.

    Directory of Open Access Journals (Sweden)

    Emilio Raymundo Morales-Maldonado

    2015-06-01

    Full Text Available The objective of this paper was to review the mixtures of organic and inorganic materials used in the preparation of a new material, particle size, proportion, and their response in plant. In Mexico, agricultural waste is considered as a pollutant reservoir; however, from another perspective, this represents an industry with great potential. The nutrients ingested by animals represent nutriments available for plants when properly recycled. An option that minimizes the risk of contamination and improves its quality is the production of compost and vermicompost. Both processes are an alternative to organic production. A material by itself does not meet the optimum conditions. Reducing the volume of an organic material increases compaction and compression of roots, affecting the efficiency of irrigation and fertilization, so it is necessary to make mixtures with inorganic materials, that is used in the development of a new material for better growing conditions of the plant.

  15. Industrial defectoscope based on multiwire proportional chamber in CAMAC system

    International Nuclear Information System (INIS)

    Brzeski, P.; Kazubek, M.; Mirkowski, J.; Szabatin, R.

    1976-01-01

    The defectoscope for non-destructive testing has been built at the Institute of Radioelectronics in collaboration with the Electrotechnical Institute, Non-destructive Division. The defectoscope consists of the following parts: gamma radiation detector, multiwire proportional chamber with γ-e converter, preamplifier system attached directly to the chamber wires, logic module of CAMAC philoscopy, and MERA 300 minicomputer. The defectoscope is used to detect material flaws in tested objects, irradiated from an internal radiation source. Minicomputer used enables data processing. The data collected in mincomputer memory are the radiological image of a tested object. It is possible to display the collected image on a television monitor, to display any profile of the image on an oscilloscope, to print the map of the image on a mosaic printer. (author)

  16. Fano factor implications from gas scintillation proportional counter measurements

    International Nuclear Information System (INIS)

    Kowalski, T.Z.; Smith, A.; Peacock, A.

    1989-01-01

    The Fano factor for xenon may be determined using a gas scintillation proportional counter in which the measured energy resolution is extrapolated to the condition of infinite light yield. The true Fano factor is expected to be independent of X-ray energy, photomultiplier type and gas pressure. Using both drifted and driftless GSPCs we have measured the Fano factor over a large range of X-ray energies (0.27-44.23 keV), photomultiplier types and gas pressures (351-878 hPa). In all three cases, when making the assumptions usually adopted in these determinations we find that the extrapolated Fano factor is dependent on the conditions. The implication is that other processes are also contributing to the measured resolution and that the determined values of the Fano factor are in fact upper limits. The Fano factor for xenon is found to be <0.12. (orig.)

  17. A Bayesian equivalency test for two independent binomial proportions.

    Science.gov (United States)

    Kawasaki, Yohei; Shimokawa, Asanao; Yamada, Hiroshi; Miyaoka, Etsuo

    2016-01-01

    In clinical trials, it is often necessary to perform an equivalence study. The equivalence study requires actively denoting equivalence between two different drugs or treatments. Since it is not possible to assert equivalence that is not rejected by a superiority test, statistical methods known as equivalency tests have been suggested. These methods for equivalency tests are based on the frequency framework; however, there are few such methods in the Bayesian framework. Hence, this article proposes a new index that suggests the equivalency of binomial proportions, which is constructed based on the Bayesian framework. In this study, we provide two methods for calculating the index and compare the probabilities that have been calculated by these two calculation methods. Moreover, we apply this index to the results of actual clinical trials to demonstrate the utility of the index.

  18. A multiwire proportional counter for very high counting rates

    International Nuclear Information System (INIS)

    Barbosa, A.F.; Guedes, G.P.; Tamura, E.; Pepe, I.M.; Oliveira, N.B.

    1998-01-01

    Preliminary measurements in a proportional counter with two independently counting wires showed that counting rates up to 10 6 counts s -1 wire -1 can be reached without critical loss in the 'true versus measured' linearity relation. Results obtained with a detector containing 30 active wires (2 mm pitch) are presented. With each wire is associated a fast pre-amplifier and a discriminator channel. Global counting rates in excess of 10 7 events s -1 are reported. Dead-time losses are corrected by use of simple mathematical-modelling functions. Data-acquisition systems are described for one-dimensional (real-time) and two-dimensional (off-line)position-sensitive detection systems

  19. Design of nuclear pulse shaped circuit based on proportional counter

    International Nuclear Information System (INIS)

    Song Qianqian; Cheng Yi; Tuo Xianguo

    2011-01-01

    Use the self-developed proportional to sample gas tritium in environment and make the measurement. For this detector, a kind of pulse shape circuit based on second order active low pass filtering circuit realized filtering and shaping nuclear pulse by high-speed operational amplifier, with less stages that has been approved for filter Gaussian wave. Use Multisim 10.0 to simulate the different parameters of the filter circuit. The simulation result was consistent with the theoretical results. The experiments proved the feasibility of this circuit, and at the same time provided a convenient and reliable method for analysis and optimization of the nuclear pulse waveform in order for discriminating by MCA. (authors)

  20. Term Structure Models with Parallel and Proportional Shifts

    DEFF Research Database (Denmark)

    Armerin, Frederik; Björk, Tomas; Astrup Jensen, Bjarne

    We investigate the possibility of an arbitrage free model for the term structure of interest rates where the yield curve only changes through a parallel shift. We consider HJM type forward rate models driven by a multidimensionalWiener process as well as by a general marked point process. Within...... this general framework we show that there does indeed exist a large variety of nontrivial parallel shift term structure models, and we also describe these in detail. We also show that there exists no nontrivial flat term structure model. The same analysis is repeated for the similar case, where the yield curve...... only changes through proportional shifts.Key words: bond market, term structure of interest rates, flat term structures....

  1. The evolution of human and ape hand proportions.

    Science.gov (United States)

    Almécija, Sergio; Smaers, Jeroen B; Jungers, William L

    2015-07-14

    Human hands are distinguished from apes by possessing longer thumbs relative to fingers. However, this simple ape-human dichotomy fails to provide an adequate framework for testing competing hypotheses of human evolution and for reconstructing the morphology of the last common ancestor (LCA) of humans and chimpanzees. We inspect human and ape hand-length proportions using phylogenetically informed morphometric analyses and test alternative models of evolution along the anthropoid tree of life, including fossils like the plesiomorphic ape Proconsul heseloni and the hominins Ardipithecus ramidus and Australopithecus sediba. Our results reveal high levels of hand disparity among modern hominoids, which are explained by different evolutionary processes: autapomorphic evolution in hylobatids (extreme digital and thumb elongation), convergent adaptation between chimpanzees and orangutans (digital elongation) and comparatively little change in gorillas and hominins. The human (and australopith) high thumb-to-digits ratio required little change since the LCA, and was acquired convergently with other highly dexterous anthropoids.

  2. Use of proportional tubes in a muon polarimeter

    International Nuclear Information System (INIS)

    Kenney, C.J.; Eckhause, M.; Ginkel, J.F.

    1988-01-01

    A prototype muon polarimeter was built to study the feasibility of measuring the positive muon polarization in the decay K/sub L/ → μ + μ/sup /minus//. The system consisted of alternating layers of extruded aluminum gas proportional tubes and polarization-retaining absorber plates of either aluminum or marble. Longitudinally polarized positive muons from the Stopped Muon Channel at the Clinton P. Anderson Meson Physics Facility (LAMPF) were stopped in the absorber plates where they precessed in a field of 60 gauss. Decay times were recorded in 100 ns first-in-first-out memories for all wires hit during a 12.8 μs period centered about the muon stop trigger. The performance of the system was studied for different beam rates and absorber thicknesses. The value of imposing time and spacial cuts on track data to enhance the precession signal was also investigated. 7 refs., 4 figs., 1 tab

  3. Operating life of X-ray proportional counters

    International Nuclear Information System (INIS)

    Vajgachev, A.A.; Klyukvina, E.F.; Puzyrev, S.Yu.; Sorokin, L.S.; Chajkovskij, V.G.; Shchekin, K.I.

    1977-01-01

    The purpose of the work was to determine the operating time of X-ray proportional counters filled with a mixture of an inert gas with an organic additive. The counter energy resolution is used as the counter serviceability criterion. Counters operated at an integral counting speed of (3-8)x10 5 pulses per second and gas gain factor of 10 3 . A linear dependance of the counter operating time from the gas gain factor has been established (in the range of 10 2 -3x10 3 ). It has also been established that the counter operating time is independent of the inert gas type. An investigation into the counter anode filaments has been carried out. The obtained photographs of the anode surface indicate that during the counter operation the anode filament is covered with high spots caused by disintegration of the damping additive

  4. Double peak effect in microdosimetric proportional counters and its interpretation

    International Nuclear Information System (INIS)

    Bednarek, B.; Olko, P.; Booz, J.

    1989-01-01

    In calibration measurements with low energy X-rays, a double peak effect appears in low pressure proportional counters with a helix, when used for simulation of tissue equivalent diameters considerably larger than 2 μm. An interpretation of this phenomenon is discussed, based upon electron capture and electric field perturbation at the counter helix. A description of the physical processes is presented showing that the double peak effect is a problem in the case of helix counters (called also Rossi counters) for all simulated diameters. Conclusions are drawn on systematic errors introduced by the counter helix into microdosimetric spectra and anti y D of photons and neutrons. The authors recommend to use cylindrical counters with optimized geometrical and electronic parameters rather than the spherical counters with a helix discussed. (orig.)

  5. A Complete Public Archive for the Einstein Imaging Proportional Counter

    Science.gov (United States)

    Helfand, David J.

    1996-01-01

    Consistent with our proposal to the Astrophysics Data Program in 1992, we have completed the design, construction, documentation, and distribution of a flexible and complete archive of the data collected by the Einstein Imaging Proportional Counter. Along with software and data delivered to the High Energy Astrophysics Science Archive Research Center at Goddard Space Flight Center, we have compiled and, where appropriate, published catalogs of point sources, soft sources, hard sources, extended sources, and transient flares detected in the database along with extensive analyses of the instrument's backgrounds and other anomalies. We include in this document a brief summary of the archive's functionality, a description of the scientific catalogs and other results, a bibliography of publications supported in whole or in part under this contract, and a list of personnel whose pre- and post-doctoral education consisted in part in participation in this project.

  6. Estimation of the false discovery proportion with unknown dependence.

    Science.gov (United States)

    Fan, Jianqing; Han, Xu

    2017-09-01

    Large-scale multiple testing with correlated test statistics arises frequently in many scientific research. Incorporating correlation information in approximating false discovery proportion has attracted increasing attention in recent years. When the covariance matrix of test statistics is known, Fan, Han & Gu (2012) provided an accurate approximation of False Discovery Proportion (FDP) under arbitrary dependence structure and some sparsity assumption. However, the covariance matrix is often unknown in many applications and such dependence information has to be estimated before approximating FDP. The estimation accuracy can greatly affect FDP approximation. In the current paper, we aim to theoretically study the impact of unknown dependence on the testing procedure and establish a general framework such that FDP can be well approximated. The impacts of unknown dependence on approximating FDP are in the following two major aspects: through estimating eigenvalues/eigenvectors and through estimating marginal variances. To address the challenges in these two aspects, we firstly develop general requirements on estimates of eigenvalues and eigenvectors for a good approximation of FDP. We then give conditions on the structures of covariance matrices that satisfy such requirements. Such dependence structures include banded/sparse covariance matrices and (conditional) sparse precision matrices. Within this framework, we also consider a special example to illustrate our method where data are sampled from an approximate factor model, which encompasses most practical situations. We provide a good approximation of FDP via exploiting this specific dependence structure. The results are further generalized to the situation where the multivariate normality assumption is relaxed. Our results are demonstrated by simulation studies and some real data applications.

  7. Debris and meteoroid proportions deduced from impact crater residue analysis

    Science.gov (United States)

    Berthoud, Lucinda; Mandeville, Jean-Claude; Durin, Christian; Borg, Janet

    1995-01-01

    This study is a further investigation of space-exposed samples recovered from the LDEF satellite and the Franco-Russian 'Aragatz' dust collection experiment on the Mir Space Station. Impact craters with diameters ranging from 1 to 900 micron were found on the retrieved samples. Elemental analysis of residues found in the impact craters was carried out using Energy Dispersive X-ray spectrometry (EDX). The analyses show evidence of micrometeoroid and orbital debris origins for the impacts. The proportions of these two components vary according to particle size and experimental position with respect to the leading edge of the spacecraft. On the LDEF leading edge 17 percent of the impacts were apparently caused by micrometeoroids and 11 percent by debris; on the LDEF trailing edge 23 percent of the impacts are apparently caused by micrometeoroids and 4 percent consist of debris particles - mostly larger than 3 micron in diameter - in elliptical orbits around the Earth. For Mir, the analyses indicate that micrometeoroids form 23 percent of impacts and debris 9 percent. However, we note that 60-70 percent of the craters are unidentifiable, so the definitive proportions of natural v. man-made particles are yet to be determined. Experiments carried out using a light gas gun to accelerate glass spheres and fragments demonstrate the influence of particle shape on crater morphology. The experiments also show that it is more difficult to analyze the residues produced by an irregular fragment than those produced by a spherical projectile. If the particle is travelling above a certain velocity, it vaporizes upon impact and no residues are left. Simulation experiments carried out with an electrostatic accelerator indicate that this limit is about 14 km/s for Fe particles impacting Al targets. This chemical analysis cut-off may bias interpretations of the relative populations of meteoroid and orbital debris. Oblique impacts and multiple foil detectors provide a higher likelihood

  8. An analysis of maxillary anterior teeth: facial and dental proportions.

    Science.gov (United States)

    Hasanreisoglu, Ufuk; Berksun, Semih; Aras, Kerem; Arslan, Ilker

    2005-12-01

    The size and form of the maxillary anterior teeth are important in achieving pleasing dental and facial esthetics. However, little scientific data have been defined as criteria for evaluating these morphological features. This study analyzed the clinical crown dimensions of maxillary anterior teeth to determine whether consistent relationships exist between tooth width and several facial measurements in a subset of the Turkish population. Full-face and anterior tooth images of 100 Turkish dental students viewed from the front and engaged in maximum smiling were recorded with digital photography under standardized conditions. Gypsum casts of the maxillary arches of the subjects were also made. The dimensions of the anterior teeth, the occurrence of the golden ratio, the difference between the actual and perceived sizes, and the relationship between the anterior teeth and several facial measurements by gender were analyzed using the information obtained from both the computer images and the casts. One-sample, 2-sample, and paired t tests, and repeated-measures analysis of variance and Duncan multiple-range tests were performed to analyze the data (alpha=.05). The dimensions of the central incisors (Pdistance and the interalar width in women were observed. The maxillary central incisor and canine dimensions of men were greater than those of women in the Turkish population studied, with the canines showing the greatest gender variation. Neither a golden proportion nor any other recurrent proportion for all anterior teeth was determined. Bizygomatic width and interalar width may serve as references for establishing the ideal width of the maxillary anterior teeth, particularly in women.

  9. Proportional assist versus assist control ventilation in premature infants.

    Science.gov (United States)

    Shetty, Sandeep; Bhat, Prashanth; Hickey, Ann; Peacock, Janet L; Milner, Anthony D; Greenough, Anne

    2016-01-01

    During proportional assist ventilation (PAV), the applied pressure is servo-controlled based on continuous input from the infant's breathing. In addition, elastic and resistive unloading can be employed to compensate for the abnormalities in the infant's lung mechanics. The aim of this study was to test the hypothesis that in very prematurely born infants remaining ventilated beyond the first week, PAV compared to assist control ventilation (ACV) would be associated with superior oxygenation. A randomised crossover study was undertaken. Infants were studied for 4 hours each on PAV and ACV in random order; at the end of each 4-h period, the oxygenation index (OI) was calculated. Eight infants, median gestational age of 25 (range 24-33) weeks, were studied at a median of 19 (range 10-105) days. It had been intended to study 18 infants but as all the infants had superior oxygenation on PAV (p = 0.0039), the study was terminated after recruitment of eight infants. The median inspired oxygen concentration (p = 0.049), mean airway pressure (p = 0.012) and OI (p = 0.012) were all lower on PAV. These results suggest that PAV compared to ACV is advantageous in improving oxygenation for prematurely born infants with evolving or established BPD. During proportional assist ventilation (PAV), the applied pressure is servo controlled throughout each spontaneous breath. Elastic and resistive unloading can compensate for the infant's abnormalities in lung mechanics. In a randomised crossover study, infants with evolving/established BPD were studied on PAV and ACV each for 4 h. The oxygenation index was significantly lower on PAV in all infants studied.

  10. Ideal proportions in full face front view, contemporary versus antique.

    Science.gov (United States)

    Mommaerts, M Y; Moerenhout, B A M M L

    2011-03-01

    To compare the facial proportions of contemporary harmonious faces with those of antiquity, to validate classical canons and to determine new ones useful in orthofacial surgery planning. Contemporary beautiful faces were retrieved from yearly polls of People Magazine and FHM. Selected B/W frontal facial photographs of 31 men and 74 women were ranked by 20 patients who had to undergo orthofacial surgery. The top-15 female faces and the top-10 male faces were analyzed with Scion Image software. The classical facial index, the Bruges facial index, the ratio lower facial height/total facial height and the vertical tri-partite of the lower face were calculated. The same analysis was done on pictures of classical sculptures representing seven goddesses and 12 gods. Harmonious contemporary female faces have a significantly lower classical facial index, indicating that facial height is less or facial width is larger than in male and even than in antique female faces. The Bruges index indicates a similar difference between ideal contemporary female and male faces. The contemporary male has a higher lower face (48%) compared to total facial height than the contemporary female (45%), although this is statistically not significant (P=0.08). The lower facial thirds index remained quite stabile for 2500 years, without gender difference. A good canon for both sexes today is stomion-gnathion being 70% of subnasale-stomion. The average ideal contemporary female face is shorter than the male face, given the fact that interpupillary distance is similar. The Vitruvian thirds in the lower face have to be adjusted to a 30% upper lip, 70% lower lip-chin proportion. The contemporary ideal ratios are suitable to be implemented in an orthofacial planning concept. Copyright © 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  11. The effect of flooding on soil proportion and plant growth. 2. Its effect on the changes in soil proportion

    International Nuclear Information System (INIS)

    Sisworo, E.L.

    1975-01-01

    An experiment has been carried out to study changes in soil proportion as affected by flooding. Barley plants were used as indicators. Black polyethylene columns were used as plant containers, and were filled with sandy loam Begbroke soil. Several parameters were used in the experiment, namely concentrations of oxygen carbon dioxide, ethylene, hydrogen sulfide, and organic acids. Oxygen concentration dropped to about 2% one day after flooding, while the concentration of carbon dioxide, ethylene and organic acids turned out to be slowly increased with the extension of flooding time. No hydrogen sulfide was detectable as affected by various flooding periods. Different concentrations of oxygen, carbon dioxide, and ethylene were observed between the top and the lower layers of soil. (author)

  12. Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics

    Directory of Open Access Journals (Sweden)

    Roberto Carlos Bodart Brandão

    2013-10-01

    Full Text Available OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics and its correlation with the periodontium (pink esthetics. Standards of normality are described both in their real dimensions (dental height and width, and in those effectively perceived by the observer, the virtual dimensions. METHODS: The best scientific evidence was sought in the literature to support the clinical procedures that must guide the professional to obtain maximum esthetic quality on their treatments. Therefore, it is necessary to investigate what the other specialties in Dentistry expect from Orthodontics and, specially, what they have to offer. Clinical cases will be used to illustrate the dental movement that might maximize treatment outcome and to confront the ideal standards with the current state of the art. CONCLUSION: Treatment quality is directly related to the amount of procedures implemented by the orthodontist, associated with concepts and resources from Periodontics and Dental Prosthesis. Microesthetics cannot be seen in isolation, but rather as the key to establish a pleasant smile (miniesthetics in addition to a harmonious face (macroesthetics and a human being with high self-esteem (hyper-esthetics.

  13. Medical applications of multi-wire proportional chambers

    International Nuclear Information System (INIS)

    Reading, D.H.

    1976-05-01

    The adaption of Multi-Wire Proportional Chambers (MWPC) for medical applications has necessitated bi-dimensional readout. This is achieved by analysing signals induced onto the cathode planes. At a useful X-ray energy of 40 to 45 keV, just above the K absorption edge in Xenon, the efficiency and resolution are both optimized. Poor resolution events due to K shell fluorescent capture and Auger emission, or L shell photo-electron emission, may be rejected by using energy discrimination - resulting in approximately halving the efficiency to 8% for a 1.6 cm thick atmospheric pressure chamber, but with sub millimeter inherent resolution. This is still far inferior to film resolution, but the MWPC is useful when numbers are required for computation or retrieval. Short descriptions of the MWPC applications to bone density measurements and tomography are given. Its use when pressurized as a gamma camera is discussed, and it is concluded that it may prove useful as a portable special purpose camera, or as one with a very large area thus compensating for low efficiency. Developments with liquid filled chambers are given and also the promising positron imaging hybrid MWPC. (author)

  14. Validating Paediatric Morphometrics: body proportion measurement using photogrammetric anthropometry.

    Science.gov (United States)

    Penders, Bas; Brecheisen, Ralph; Gerver, Angèle; van Zonneveld, Geertjan; Gerver, Willem-Jan

    2015-11-01

    Taking multiple anthropometric measurements for the description of body proportions in an accurate way is a time-consuming procedure that requires specific tools and skills. This is why we developed an alternative method based on digital photography for taking these measurements which is faster and easier to use, to make anthropometry more user-friendly and approachable to paediatricians. We conducted a cross-sectional study in 54 children between 2 and 18 years of age. We compared manual measurements with photogrammetric measurements to validate our method. Inter-observer correlations of all measurements are ≥0.96 and mean differences are 0.3-0.9 cm, except for arm span. Comparison of manual to photogrammetric measurements shows mean differences of 0.6-1.3 cm, with correlations ≥0.92, except for sitting height and arm span. Correlations of ratios between methods are height/sitting height (r=0.77), biacromium/biiliacum (r=0.74) and subischial leg length/sitting height (r=0.75). Photogrammetric anthropometry is faster, easier to use and provides the paediatrician with more flexibility as taking the digital photographs and performing the analysis are separated.

  15. Digital signal processing for He3 proportional counter

    International Nuclear Information System (INIS)

    Zeynalov, Sh.S.; Ahmadov, Q.S.

    2010-01-01

    Full text : Data acquisition systems for nuclear spectroscopy have traditionally been based on systems with analog shaping amplifiers followed by analog-to-digital converters. Recently, however, new systems based on digital signal processing make possible to replace the analog shaping and timing circuitry the numerical algorithms to derive properties of the pulse such as its amplitude. DSP is a fully numerical analysis of the detector pulse signals and this technique demonstrates significant advantages over analog systems in some circumstances. From a mathematical point of view, one can consider the signal evolution from the detector to the ADC as a sequence of transformations that can be described by precisely defined mathematical expressions. Digital signal processing with ADCs has the possibility to utilize further information on the signal pulses from radiation detectors. In the experiment each step of the signal generation in the 3He filled proportional counter was described using digital signal processing techniques (DSP). The electronic system has consisted of a detector, a preamplifier and a digital oscilloscope. The pulses from the detector were digitized using a digital storage oscilloscope. This oscilloscope allowed signal digitization with accuracy of 8 bit (256 levels) and with frequency of up to 5 * 10 8 samples/s. As a neutron source was used Cf-252. To obtain detector output current pulse I(t) created by the motions of the ions/electrons pairs was written an algorithm which can easily be programmed using modern computer programming languages.

  16. Proportion of Rh phenotypes in voluntary blood donors.

    Science.gov (United States)

    Sarkar, R S; Philip, Joseph; Mallhi, R S; Yadav, Pramod

    2013-10-01

    The Rh system is the major blood group system besides ABO system. Even after proper blood grouping and cross matching there is a possibility of alloimmunization and antibody production in the recipients against the Rh or minor blood group antigens like Kell, MNSs, Duffy etc. Keeping in view the heavy financial burden of complete phenotyping of blood; the determination of only Rh phenotypes can play a major role in preventing alloimmunization and adverse events in multitransfusion cases. To determine the proportion of Rh phenotypes in voluntary blood donors with a view to generate blood bank data for constitution of panel of blood donors for multipurpose utilities. Identification of Rhesus factors (Rh) was done by the antigen antibody agglutination test by the test tube method on 10,133 healthy voluntary donors. The phenotypic frequencies of Rh blood groups in the studied population were D-92.25%, C-87.55%, E-26.55%, c-51.06% and e-98.42%. Thus 'e' was the most common and E was the least common of all the Rh types. Phenotypically DCCee group was the most common phenotype and dccee was least common type. Determination of Rh phenotypes can play a major role in preventing alloimmunization and avoiding adverse events in multitransfusion cases.

  17. Out of proportion pulmonary hypertension in obstructive lung diseases.

    Science.gov (United States)

    Chatterjee, Kshitij; Tarawneh, Ahmad R; Alam, Shoaib

    2018-03-01

    Pulmonary hypertension is common (25-90%) in chronic obstructive pulmonary diseases (COPDs). Severe pulmonary hypertension, however, is quite rare (1-3%). The term 'out of proportion' pulmonary hypertension is still widely used. New guidelines instead propose to use the term 'Severe pulmonary hypertension' if mean pulmonary arterial pressure at least 35 mmHg or cardiac index (CI) is less than 2.0 l/min/m on right heart catheterization (RHC). Why only a minority of COPD patients develop severe pulmonary hypertension is unclear. When present, severe pulmonary hypertension in COPD is associated with increased dyspnea and decreased survival and often does not closely correlate with degree of obstructive abnormality on pulmonary function testing. COPD patients with severe pulmonary hypertension experience circulatory limitation at maximum exercise, and not ventilatory limitation, which is typical for moderate-to-severe COPD patients with no or moderate pulmonary hypertension. There is no conclusive evidence to support or completely reject the possibility of the use of specific pulmonary arterial hypertension (PAH) therapies in pulmonary hypertension associated with COPD. In mild-to-moderate COPD patients who have severe and progressive symptoms, and have evidence of severe pulmonary hypertension on RHC, specific PAH therapies may be used similar to WHO group-I PAH guidelines.

  18. The European ‘Nomofilachia’ and the Principle of Proportionality

    Directory of Open Access Journals (Sweden)

    Antonio BARONE

    2009-12-01

    Full Text Available *The European Court of Justice greatly contributes to the guarantees that Community law will be uniformly interpreted and applied (“nomofilachia” and the rights which individuals derive from the Community legal order will be effectively protected. This essay analyses some aspects of the European Union “nomofilachia”; the research is developed in two steps which are strictly correlated. In the first part, it will be underlined how the uniform interpretation and the uniform application of EC law go beyond the provisions of art. 234 of the EC Treat; and are supported by new kind of relations among the Court of Justice, national courts and national administrations. In the second part of the research, it will be highlighted the impact of the general principles of the European Community legal system, moulded through the “nomofilachia” function of the Luxembourg Court, as regards the activities of national administrations. The analysis gives a particular attention to the evolutionary dynamics of the proportionality principle. All these aspects work in a contemporary context of deep transformation of the traditional relations among law, courts, administrations and citizens. * This essay is the joint work of both authors with Barone primary responsible for paragraph 1,2,3,4,9 and Ansaldi for paragraph 5,6,7,8.

  19. Conflicts between domestic inequality and global poverty: lexicality versus proportionality

    Directory of Open Access Journals (Sweden)

    Francisco García Gibson

    2016-12-01

    Full Text Available Current views on global justice often hold that affluent states are under at least two duties: a duty to reduce socioeconomic inequalities at home and a duty to reduce extreme poverty abroad. Potential duty conflicts deriving from resource scarcity can be solved in broadly two principled ways. The ‘lexical’ principle requires all disputed resources to be allocated to the weightiest duty. The ‘proportionality’ principle requires resources to be distributed between the two duties according to their relative weight (the weightiest duty receives the largest resource share, but the less weighty duty receives a share too. I argue that the proportionality principle is morally preferable. I show that it is sensitive to a number of factors that are intuitively relevant when solving duty conflicts: the number of affected individuals, the size of the benefits each individual could get, and the time it could take to eventually comply with the less weighty duty. Some argue that the lexical principle should nevertheless be preferred because domestic egalitarian duties are duties of justice, and they are therefore lexically prior to mere humanitarian duties to reduce global poverty. I reject this view by showing that duties of justice are not necessarily lexically prior to humanitarian duties, and that (even if they were duties to reduce global poverty can be regarded as duties of justice too.

  20. Flexible proportional-rate scheduling for OFDMA system

    KAUST Repository

    Leith, Alex

    2013-10-01

    In this paper, we study the sum-rate maximization algorithms for downlink and uplink orthogonal frequency division multiple access (OFDMA) systems under proportional-rate constraint (PRC) and minimum-rate constraint. We develop a low-complexity weighted channel signal-to-noise ratio (w-SNR)-based ranking scheme for user selection on each subchannel in OFDMA combined with waterfilling (WF) power allocation. Both offline and online optimization algorithms are developed to optimize the SNR weight vector to maximize the sum rate while satisfying several constraints, such as PRC. The offline weight optimization technique relies on the analytical throughput results developed in this paper, and the online weight adaptation method tracks the user rates and meets the PRC using a subgradient search. Furthermore, we introduce a novel SNR operating region test to enhance the multiuser diversity gain and the sum rate. The proposed schemes have a low complexity, which is linear to the numbers of users and subchannels. Simulation results verify the accuracy of the developed analytical rates and fairness formulas, and show that the proposed w-SNR schemes can achieve higher sum rates than several benchmark schemes that provide the PRC with either short-term or long-term fairness. © 2013 IEEE. © 2013 ESO.

  1. Calibration and background measurements with a tissue equivalent proportional counter

    International Nuclear Information System (INIS)

    Autischer, M.; Beck, P.; Rollet, S.; Kindl, P.; Latocha, M.

    2005-01-01

    Full text: A TEPC (tissue equivalent proportional counter) instrument has been used as the reference instrument for cosmic radiation measurement at flight altitudes by several institutes. For characterization purposes the instrument response has been investigated under different standard radiation conditions, in terms of radiation particle, energy and angular direction. Photon sources and photon beams up to 6 MeV and neutron beams up to 200MeV were used. To deepen understanding the shielding influence of the instrument assembly, the angle dependency were analyzed for several radiation conditions. Specific measurement conditions were simulated with the Monte Carlo transport code FLUKA. The measured instrument response is compared with simulation results. lt is demonstrated, that simulation are very helpful to understand the instruments response. The used TEPC instrument of the Austrian Research Center Seibersdorf (ARCS) simulates the energy deposition in a cell size tissue volume of 2 μm diameter. Pure propane at low pressure is used as measurement gas. To characterize the instrument at low dose rates, background measurements were done about 800 m below ground and at the ultra low level laboratory in Gran Sasso, 1380 m below ground. These results were compared with measurements on earth's surface at different altitudes on mountains up to 3480 m above the sea level. The significant increase of the expected dose rate is well reproduced by the experiments at mountain altitudes. As a result of this study a full characterization and a complete understanding of the performance and reliability of the detector is achieved. (author)

  2. A vertex trigger based on cylindrical multiwire proportional chambers

    Energy Technology Data Exchange (ETDEWEB)

    Becker, J.; Boesiger, K.; Lindfeld, L.; Mueller, K.; Robmann, P.; Schmitt, S.; Schmitz, C.; Steiner, S. [Physik-Institut, Universitaet Zuerich, CH-8057 Zurich (Switzerland); Straumann, U. [Physik-Institut, Universitaet Zuerich, CH-8057 Zurich (Switzerland)], E-mail: strauman@physik.unizh.ch; Szeker, K.; Truoel, P.; Urban, M.; Vollhardt, A.; Werner, N. [Physik-Institut, Universitaet Zuerich, CH-8057 Zurich (Switzerland); Baumeister, D.; Loechner, S. [ASIC-Laboratory, Kirchhoff-Institut fuer Physik, D-69120 Heidelberg (Germany); Hildebrandt, M. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland)

    2008-02-21

    This article describes the technical implementation and the performance of the z-vertex trigger (CIP2k), which is part of the H1-experiment at HERA. The HERA storage ring and collider was designed to investigate electron (and positron) proton scattering at a center-of-mass energy of 320 GeV. To improve the sensitivity for detecting non-standard model physics and other high momentum transfer phenomena, the HERA ring has been ungraded between 2000 and 2003 to increase the specific luminosity for the experiments. In order to cope with the increased event and background rate the experiments were upgraded, too. The CIP2k trigger system is based on a set of five cylindrical multiwire proportional chambers with cathode pad readout, and allows to distinguish between events induced by beam background and ep-interactions at the first trigger stage. The trigger decision is calculated dead-time free with a latency of 1.5{mu}s in parallel to the beam clock at 10.4 MHz. The trigger-logic is realized in large field programmable gate arrays (FPGA) using the hardware description language Verilog. The system is operational since October 2003. It suppresses background events with high efficiency and provides event timing information, as designed.

  3. Indigenous development of B-10 lined proportional counters

    International Nuclear Information System (INIS)

    Dighe, P.M.; Prasad, K.R.

    1997-01-01

    Boron lined proportional counters are required for neutron flux measurements in many important applications that include research and power reactor startup instrumentation, REM monitoring in health physics, plutonium waste monitoring in radiological laboratories and so forth. An all-welded high purity aluminium counter with integral m.i. cable assembly having 3.5 cps/nv neutron sensitivity has been developed. Special explosion welded SS-Al clad plate has been used as end plate to weld the ceramic metal seals and also to weld the m.i. cable outer sheath. It was filled with Ar+CO 2 gas mixture at 20cm Hg. This counter showed 40% reduction in sensitivity in 1000r/h gamma background. There was no change in its performance at 100 deg C. Similar counters are under fabrication for Fast Breeder Test Reactor (FBTR) start up instrumentation. Another SS counter with 28 mm OD and 100 mm sensitive length with the same gas filling has been developed. It has 0.8 cps/nv sensitivity and will be used for REM monitoring. 9 refs., 8 figs

  4. Disease-proportional proteasomal degradation of missense dystrophins

    Science.gov (United States)

    Talsness, Dana M.; Belanto, Joseph J.; Ervasti, James M.

    2015-01-01

    The 427-kDa protein dystrophin is expressed in striated muscle where it physically links the interior of muscle fibers to the extracellular matrix. A range of mutations in the DMD gene encoding dystrophin lead to a severe muscular dystrophy known as Duchenne (DMD) or a typically milder form known as Becker (BMD). Patients with nonsense mutations in dystrophin are specifically targeted by stop codon read-through drugs, whereas out-of-frame deletions and insertions are targeted by exon-skipping therapies. Both treatment strategies are currently in clinical trials. Dystrophin missense mutations, however, cause a wide range of phenotypic severity in patients. The molecular and cellular consequences of such mutations are not well understood, and there are no therapies specifically targeting this genotype. Here, we have modeled two representative missense mutations, L54R and L172H, causing DMD and BMD, respectively, in full-length dystrophin. In vitro, the mutation associated with the mild phenotype (L172H) caused a minor decrease in tertiary stability, whereas the L54R mutation associated with a severe phenotype had a more dramatic effect. When stably expressed in mammalian muscle cells, the mutations caused steady-state decreases in dystrophin protein levels inversely proportional to the tertiary stability and directly caused by proteasomal degradation. Both proteasome inhibitors and heat shock activators were able to increase mutant dystrophin to WT levels, establishing the new cell lines as a platform to screen for potential therapeutics personalized to patients with destabilized dystrophin. PMID:26392559

  5. Estimation of proportions of objects and determination of training sample-size in a remote sensing application

    Science.gov (United States)

    Chhikara, R. S.; Odell, P. L.

    1973-01-01

    A multichannel scanning device may fail to observe objects because of obstructions blocking the view, or different categories of objects may make up a resolution element giving rise to a single observation. Ground truth will be required on any such categories of objects in order to estimate their expected proportions associated with various classes represented in the remote sensing data. Considering the classes to be distributed as multivariate normal with different mean vectors and common covariance, maximum likelihood estimates are given for the expected proportions of objects associated with different classes, using the Bayes procedure for classification of individuals obtained from these classes. An approximate solution for simultaneous confidence intervals on these proportions is given, and thereby a sample-size needed to achieve a desired amount of accuracy for the estimates is determined.

  6. Electron proportional gas counter for linear and elliptical Moessbauer polarimetry

    Energy Technology Data Exchange (ETDEWEB)

    Tancziko, F.; Sajti, Sz.; Deak, L.; Merkel, D. G.; Endro' ' czi, G.; Nagy, D. L.; Bottyan, L. [KFKI Research Institute for Particle and Nuclear Physics, P.O.B 49, Budapest H 1525 (Hungary); Olszewski, W.; Szymanski, K. [Faculty of Physics, University of Bialystok, Lipowa 41, Bialystok PL-15-424 (Poland)

    2010-02-15

    Design, characterization, and selected applications of a novel electron detector dedicated to conventional perpendicular- and low-angle-incidence conversion electron Moessbauer spectroscopy are presented. The setup is suitable for varying the incident angle and external magnetic fields on Moessbauer source and absorber. Test experiments were performed on {alpha}-{sup 57}Fe films using a conventional single-line {sup 57}Co(Rh) and magnetically split, {sup 57}Co({alpha}-Fe) Moessbauer sources. The integral ''blackness effect'' in conversion-electron Moessbauer spectra of {sup 57}Fe isotope-enriched absorbers is demonstrated and shown to be pronounced at shallow angles of incidence. In order to determine the alignment and sign of the hyperfine field in an isotope-enriched absorber, the blackness effect is accounted for in a semiempirical way by using single-line source/absorber experimental relative intensities determined independently. This method works with high accuracy for linear polarimetry; however it is only a rough approximation in the case of nearly circular polarimetry.

  7. Long-term plasticity is proportional to theta-activity.

    Directory of Open Access Journals (Sweden)

    Marian Tsanov

    Full Text Available BACKGROUND: Theta rhythm in the hippocampal formation is a main feature of exploratory behaviour and is believed to enable the encoding of new spatial information and the modification of synaptic weights. Cyclic changes of dentate gyrus excitability during theta rhythm are related to its function, but whether theta epochs per se are able to alter network properties of dentate gyrus for long time-periods is still poorly understood. METHODOLOGY/PRINCIPAL FINDINGS: We used low-frequency stimulation protocols that amplify the power of endogenous theta oscillations, in order to estimate the plasticity effect of endogenous theta oscillations on a population level. We found that stimulation-induced augmentation of the theta rhythm is linked to a subsequent increase of neuronal excitability and decrease of the synaptic response. This EPSP-to-Spike uncoupling is related to an increased postsynaptic spiking on the positive phases of theta frequency oscillations. Parallel increase of the field EPSP slope and the population spike occurs only after concurrent pre- and postsynaptic activation. Furthermore, we observed that long-term potentiation (>24 h occurs in the dentate gyrus of freely behaving adult rats after phasic activity of entorhinal afferents in the theta-frequency range. This plasticity is proportional to the field bursting activity of granule cells during the stimulation, and may comprise a key step in spatial information transfer. Long-term potentiation of the synaptic component occurs only when the afferent stimulus precedes the evoked population burst, and is input-specific. CONCLUSIONS/SIGNIFICANCE: Our data confirm the role of the dentate gyrus in filtering information to the subsequent network during the activated state of the hippocampus.

  8. Proportional assist ventilation improves exercise capacity in patients with obesity.

    Science.gov (United States)

    Dreher, Michael; Kabitz, Hans-Joachim; Burgardt, Verena; Walterspacher, Stephan; Windisch, Wolfram

    2010-01-01

    Exercise capacity is reduced in obese patients due to disadvantageous respiratory mechanics that lead to dyspnea. Proportional assist ventilation (PAV) has the potential to unload resistive and elastic burdens of the ventilatory system. The present study aimed to test if PAV can increase endurance and reduce exercise-related dyspnea in obese patients. Two symptom-limited exercise tests were performed at 75% of V.O(2max): (1) without PAV and (2) with PAV. Exercise endurance, blood gases, dyspnea and limb discomfort (Borg scale) were assessed. Responders to PAV were defined as those increasing their exercise duration by more than 20%. Eighteen male obese patients (body mass index 35 +/- 5 kg/m(2)) were investigated. Overall, PAV increased exercise duration by 13% (p = 0.037) and improved exercise-induced dyspnea (p = 0.004). In responders (n = 10), PAV increased the exercise duration by 31% from 721 +/- 300 to 1,041 +/- 454 s (p PAV can only be predicted from total lung capacity (p = 0.02), considering total lung capacity, V.O(2max) and body mass index. PAV applied during exercise led to an overall prolongation in exercise endurance and a reduction in dyspnea in obese patients. There was a broad spectrum of response to PAV, with more than 50% of patients increasing their exercise endurance by a mean of 31%. Therefore, PAV might serve as a novel treatment option to enhance exercise capacity in a subgroup of obese patients in rehabilitation programs. Copyright 2009 S. Karger AG, Basel.

  9. Digital signal processing for He3 proportional counter

    International Nuclear Information System (INIS)

    Ahmadov, Q.S.; Institute of Radiation Problems, ANAS, Baku

    2011-01-01

    Full text: Data acquisition systems for nuclear spectroscopy have traditionally been based on systems with analog shaping amplifiers followed by analog-to-digital converters. Recently, however, new systems based on digital signal processing allow us to replace the analog shaping and timing circuitry the numerical algorithms to derive properties of the pulse such as its amplitude. DSP is a fully numerical analysis of the detector pulse signals and this technique demonstrates significant advantages over analog systems in some circumstances. From a mathematical point of view, one can consider the signal evolution from the detector to the ADC as a sequence of transformations that can be described by precisely defined mathematical expressions.Digital signal processing with ADCs has the possibility to utilize further information on the signal pulses from radiation detectors [1] [2]. In the experiment each step of the signal generation in the 3He filled proportional counter was described using digital signal processing techniques (DSP). The electronic system has consisted of a detector, a preamplifier and a digital oscilloscope. The pulses from the detector were digitized using a OTSZS-02 (250USB)-4 digital storage oscilloscope from ZAO R UDNEV-SHILYAYEV . This oscilloscope allowed signal digitization with accuracy of 8 bit(256 levels) and with frequency of up to 5.10''8 samples/s. As a neutron source was used Cf-252.To obtain detector output current pulse I(t) created by the motions of the ions/electrons pairs was written an algorithm which can easily be programmed using modern computer programming languages

  10. Proportioning and performance evaluation of self-consolidating concrete

    Science.gov (United States)

    Wang, Xuhao

    A well-proportioned self-consolidating concrete (SCC) mixture can be achieved by controlling the aggregate system, paste quality, and paste quantity. The work presented in this dissertation involves an effort to study and improve particle packing of the concrete system and reduce the paste quantity while maintaining concrete quality and performance. This dissertation is composed of four papers resulting from the study: (1) Assessing Particle Packing Based Self-Consolidating Concrete Mix Design; (2) Using Paste-To-Voids Volume Ratio to Evaluate the Performance of Self-Consolidating Concrete Mixtures; (3) Image Analysis Applications on Assessing Static Stability and Flowability of Self-Consolidating Concrete, and (4) Using Ultrasonic Wave Propagation to Monitor Stiffening Process of Self-Consolidating Concrete. Tests were conducted on a large matrix of SCC mixtures that were designed for cast-in-place bridge construction. The mixtures were made with different aggregate types, sizes, and different cementitious materials. In Paper 1, a modified particle-packing based mix design method, originally proposed by Brouwers (2005), was applied to the design of self-consolidating concrete (SCC) mixs. Using this method, a large matrix of SCC mixes was designed to have a particle distribution modulus (q) ranging from 0.23 to 0.29. Fresh properties (such as flowability, passing ability, segregation resistance, yield stress, viscosity, set time and formwork pressure) and hardened properties (such as compressive strength, surface resistance, shrinkage, and air structure) of these concrete mixes were experimentally evaluated. In Paper 2, a concept that is based on paste-to-voids volume ratio (Vpaste/Vvoids) was employed to assess the performance of SCC mixtures. The relationship between excess paste theory and Vpaste/Vvoids was investigated. The workability, flow properties, compressive strength, shrinkage, and surface resistivity of SCC mixtures were determined at various ages

  11. To Build Proportions in Time, or Tie Knots in Space? A Reassessment of the Renaissance Turn in Architectural Proportions

    Directory of Open Access Journals (Sweden)

    Marvin Trachtenberg

    2014-06-01

    Full Text Available Since Alberti, and most critically since Wittkower’s 'Architectural Principles', architectural theory has tended to construe ‘proportions’ in plenary, static terms. The dimension of time and change that relentlessly affects all human endeavor is not accommodated by the celebrated Albertian ideal of immutable design perfection, so perfect in all respects that once attained ‘nothing can be added, taken away, or altered, but for the worse’. This article, drawing on the author’s recent book, 'Building-in-Time from Giotto to Alberti and Modern Oblivion' (Yale, 2010, outlines the antithetical, dynamic proportional methodology of the pre-Albertian architectural regime. Its point of departure was the author’s concept of durational aesthetics, according to which perfected architectural form is produced by a process of incessant revision. What distinguished this process from related ancient or neo-antique doctrines was above all its dynamic modality and participation in the fluid orientation and processes of ‘building-in-time’.

  12. Proportional Load Sharing and Stability of DC Microgrid with Distributed Architecture Using SM Controller

    Directory of Open Access Journals (Sweden)

    Muhammad Rashad

    2018-01-01

    Full Text Available DC microgrids look attractive in distribution systems due to their high reliability, high efficiency, and easy integration with renewable energy sources. The key objectives of the DC microgrid include proportional load sharing and precise voltage regulation. Droop controllers are based on decentralized control architectures which are not effective in achieving these objectives simultaneously due to the voltage error and load power variation. A centralized controller can achieve these objectives using a high speed communication link. However, it loses reliability due to the single point failure. Additionally, these controllers are realized through proportional integral (PI controllers which cannot ensure load sharing and stability in all operating conditions. To address limitations, a distributed architecture using sliding mode (SM controller utilizing low bandwidth communication is proposed for DC microgrids in this paper. The main advantages are high reliability, load power sharing, and precise voltage regulation. Further, the SM controller shows high robustness, fast dynamic response, and good stability for large load variations. To analyze the stability and dynamic performance, a system model is developed and its transversality, reachability, and equivalent control conditions are verified. Furthermore, the dynamic behavior of the modeled system is investigated for underdamped and critically damped responses. Detailed simulations are carried out to show the effectiveness of the proposed controller.

  13. Conversion electron Moessbauer study of solid surfaces at lower temperatures with a proportional counter

    International Nuclear Information System (INIS)

    Matsuo, M.; Sato, H.; Takeda, M.; Tominaga, T.

    1980-01-01

    Conversion electron Moessbauer spectra of single crystals of iron(II) sulfate heptahydrate and ammonium iron(III) sulfate dodecahydrate were measured at 195 K by using a proportional counter, although such spectra were not available at room temperature because of the efflorescence of the crystals. In the solid phase reaction between bis(ammonium)iron(II) sulfate hexahydrate (Mohr's salt) and potassium cyanide, the conversion electron Moessbauer spectrum at 195 K revealed formation of potassium hexacyanoferrate(II) in the surface of the Mohr's salt, whereas any change was scarcely observed in the bulk crystal of the parent compound by transmission measurements. Good conversion electron Moessbauer spectra of a 57 Fe foil could be obtained at 100 K. (author)

  14. Absolute and proportional measures of potential markers of rehearsal, and their implications for accounts of its development

    Directory of Open Access Journals (Sweden)

    Christopher eJarrold

    2015-03-01

    Full Text Available Previous studies of the development of phonological similarity and word length effects in children have shown that these effects are small or absent in young children, particularly when measured using visual presentation of the memoranda. This has often been taken as support for the view that young children do not rehearse. The current paper builds on recent evidence that instead suggests that absent phonological similarity and word length effects in young children reflects the same proportional cost of these effects in children of all ages. Our aims are to explore the conditions under which this a proportional scaling account can reproduce existing developmental data, and in turn suggest ways that future studies might measure and model phonological similarity and word length effects in children. To that end, we first fit a single mathematical function through previously reported data that simultaneously captures absent and negative proportional effects of phonological similarity in young children plus constant proportional similarity effects in older children. This developmental function therefore provides the benchmark that we seek to re-produce in a series of subsequent simulations that test the proportional scaling account. These simulations reproduce the developmental function well, provided that they take into account the influence of floor effects and of measurement error. Our simulations suggest that future empirical studies examining these effects in the context of the development of rehearsal need to take into account proportional scaling. They also provide a demonstration of how proportional costs can be explored, and of the possible developmental functions associated with such an analysis.

  15. Aplikasi Kontrol PI (Proportional Integral pada Katup Ekspansi Mesin Pendingin

    Directory of Open Access Journals (Sweden)

    Bayu Rudiyanto

    2016-10-01

    Full Text Available Abstrak. Penelitian ini bertujuan untuk melakukan proses perancangan dan pembuatan kontrol katup ekspansi otomatis dengan menggunakan sistem kontrol PI, untuk melakukan proses pengontrolan temperatur ruang evaporator agar didapatkan hasil pembekuan yang lebih optimal. Sensor temperatur LM35 digunakan dalam penelitian ini untuk melakukan pembacaan temperatur pada ruang evaporator, yang mana dari hasil pembacaan sensor tersebut digunakan sebagai sinyal masukan untuk sistem kontrol PI. Berdasarkan hasil pengujian sensor LM35 mempunyai sensitivitas pembacaan sebesar 0,009335 V/oC.  Unjuk kerja sistem kontrol PI pada penelitian ini didapatkan respon yang baik pada nilai Kp = 20 dan Ki = 10, dimana dengan nilai berikut untuk mencapai temperatur set point waktu yang dibutuhkan selama 251 detik dengan nilai maximum overshoot lebih rendah yaitu -2,4 oC. Hasil pendinginan yang didapatkan pada penelitian ini dengan menggunakan sistem kontrol katup ekspansi otomatis didapat proses pendinginan yang lebih cepat dan energi yang dibutuhkan jauh lebih hemat yaitu sebesar 0,265 kWh.   The Application of A Control PI (Proportional Integral on Expansion Valves Refrigeration Machine  Abstract. This research aim to do design process and making control valve expansion automatic by using control system PI, which then applied on refrigerator plates touch to perform the process of control freezing temperatures. Censor temperature LM35 used in this research to do reading the temperature at evaporator room, of results reading sensors is used as input signal to control system PI. Based on the test result of testing censor LM35 have the sensitivity reading of almost accordance with the datav sheet is as much as 0,009335 V/oC. Were control sistem works PI the research this obtained response good to value center Kp = 20 and Ki =10. In which value, to reach set temperature point , the time it takes 251 seconds by value maximum overshoot point lower then -2.4°C. The result

  16. Regulation, proportionality and discharges of radioactive wastes: UK perspective

    International Nuclear Information System (INIS)

    Morley, Bob; Butler, Gregg; Mc Glynn, Grace

    2008-01-01

    In recent years, the UK Government and the Regulators have made a commitment to further improve the operation of the regulatory regime and to its operating within the principles of proportionality, transparency, consistency and accountability which underpin the Government's approach to regulation in general. Particular emphasis was to be placed upon ensuring that there is greater consistency in the treatment of risk and hazard; proportionate and cost effective delivery of public, worker and environmental protection; and an open and transparently applied regulatory system. It is noteworthy that with regard to radiation protection, there are different limits for public doses and workforce doses, with the latter 15 times greater. Allowable doses for medical patients are higher still. This discrepancy raises a question in itself. This presentation focuses on the practical application of the regulatory regime with particular regard to environmental discharges and disposals. Under the Radioactive Substances Act 1993, Operators within the UK nuclear industry are required to employ Best Practicable Means (BPM) to control and minimise radioactive discharges to ensure that doses from discharges are As Low As Reasonably Achievable (ALARA). Scientific assessments to date indicate that there are no expectations of environmental harm from discharges at Sellafield (and hence likewise at other UK nuclear sites where the discharges are lower), even where those discharges have historically been up to two orders of magnitude higher than current levels. Current discharges result in doses which are a small fraction of those received by the UK population due to natural background radiation. In addition, there is no proven environmental harm from foreseeable future discharges from Sellafield or other UK nuclear sites. This is supported by independent work which illustrates that the public collective dose from Sellafield discharges is almost all delivered at risks of less that one in a

  17. Comparison of multinomial and binomial proportion methods for analysis of multinomial count data.

    Science.gov (United States)

    Galyean, M L; Wester, D B

    2010-10-01

    Simulation methods were used to generate 1,000 experiments, each with 3 treatments and 10 experimental units/treatment, in completely randomized (CRD) and randomized complete block designs. Data were counts in 3 ordered or 4 nominal categories from multinomial distributions. For the 3-category analyses, category probabilities were 0.6, 0.3, and 0.1, respectively, for 2 of the treatments, and 0.5, 0.35, and 0.15 for the third treatment. In the 4-category analysis (CRD only), probabilities were 0.3, 0.3, 0.2, and 0.2 for treatments 1 and 2 vs. 0.4, 0.4, 0.1, and 0.1 for treatment 3. The 3-category data were analyzed with generalized linear mixed models as an ordered multinomial distribution with a cumulative logit link or by regrouping the data (e.g., counts in 1 category/sum of counts in all categories), followed by analysis of single categories as binomial proportions. Similarly, the 4-category data were analyzed as a nominal multinomial distribution with a glogit link or by grouping data as binomial proportions. For the 3-category CRD analyses, empirically determined type I error rates based on pair-wise comparisons (F- and Wald chi(2) tests) did not differ between multinomial and individual binomial category analyses with 10 (P = 0.38 to 0.60) or 50 (P = 0.19 to 0.67) sampling units/experimental unit. When analyzed as binomial proportions, power estimates varied among categories, with analysis of the category with the greatest counts yielding power similar to the multinomial analysis. Agreement between methods (percentage of experiments with the same results for the overall test for treatment effects) varied considerably among categories analyzed and sampling unit scenarios for the 3-category CRD analyses. Power (F-test) was 24.3, 49.1, 66.9, 83.5, 86.8, and 99.7% for 10, 20, 30, 40, 50, and 100 sampling units/experimental unit for the 3-category multinomial CRD analyses. Results with randomized complete block design simulations were similar to those with the CRD

  18. Proportional chambers and multiwire drift chambers at high rates

    International Nuclear Information System (INIS)

    Walenta, A.H.

    1977-01-01

    The high event and particle rates expected for ISABELLE intersecting storage rings raise the question whether PWC's and drift chambers, now widely in use in experiments, still can operate under such conditions. Various effects depend on the number of avalanches produced per length of wire N and the size of the avalanche Q, i.e., on the number of positive ions created in an avalanche. Therefore the important parameter for the following discussion is the product QN. The minimum Q is determined by the type and noise level of preamplifiers used. Examples are given for a typical low noise amplifier as well as for a typical integrated ''cheap'' amplifier. The rate/wire length N depends on the chamber arrangement, wire spacing, etc. In multiwire drift chambers, a single wire shows space-charge effects reducing the pulse height by 1% at a rate of N = 7 x 10 3 mm -1 sec -1 . At a rate of N approximately equal to 10 5 mm -1 sec -1 an efficiency loss of the order of 1% was noticed. The aging effect due to deposits on the anode wire can be reduced using low noise amplifiers and low gas gain to such an extent that a lifetime of about half a year at ISABELLE can be expected. The use of conventional cheap preamplifiers will result in a typical lifetime of about 30 days. Improvements are probable. The time resolution of Δt/sub r/ = 4 nsec fwhm seems adequate for event rates of 10 7 sec -1 . The memory time Δt/sub m/ greater than or equal to 100 nsec may cause serious problems for pattern recognition depending on layout and readout. The use of induced signals on cathode pads, thus reading out shorter parts of the wire, can solve the problem

  19. Volatile fatty acids production in the rumen of young heifers given diets containing a large proportion of concentrate

    International Nuclear Information System (INIS)

    Oshio, Shuichi; Tahata, Ichiro; Kobayashi, Haruo; Ami, Tsuyako

    1977-01-01

    The rate of production of volatile fatty acids (VFA) in the rumen of animals on high concentrate feeding was studied with eighteen young heifers fitted with a permanent rumen fistula, using a single injection method of 14 C-acetate and polyethylene glycol (PEG) in order to get some basic informations of rumen fermentation on concentrate diets. The results obtained were as follows; 1) The pH value, total VFA concentration, and proportion of each acid on all-concentrate diets showed distinguished differences in comparison with those of the animals fed a large proportion of hay, but varied widely between days and heifers. 2) VFA proportions were significantly correlated with pH. At the pH value of about 5.2, acetic acid was minimum, and propionic acid and valeric acid were maximum in molar proportion. 3) It was suggested that, in the case of all-concentrate feeding for a long period, the VFA production in the rumen was depressed to 33.5-41% of digestible energy. In the animals fed hay and concentrate, the percentage was about 50%. (auth.)

  20. Evaluation of Recurring Esthetic Dental Proportion in Natural Mandibular Anterior Dentition

    Directory of Open Access Journals (Sweden)

    Dipti S Shah

    2015-01-01

    Results: After calculating proportions in mandibular anterior teeth, P value was found to be statistically insignificant (P > 0.05. Conclusion: Within the limitations of the study, RED proportion was not seen in mandibular natural dentition.

  1. A Biomechanical Comparison of Proportional Electromyography Control to Biological Torque Control Using a Powered Hip Exoskeleton.

    Science.gov (United States)

    Young, Aaron J; Gannon, Hannah; Ferris, Daniel P

    2017-01-01

    Despite a large increase in robotic exoskeleton research, there are few studies that have examined human performance with different control strategies on the same exoskeleton device. Direct comparison studies are needed to determine how users respond to different types of control. The purpose of this study was to compare user performance using a robotic hip exoskeleton with two different controllers: a controller that targeted a biological hip torque profile and a proportional myoelectric controller. We tested both control approaches on 10 able-bodied subjects using a pneumatically powered hip exoskeleton. The state machine controller targeted a biological hip torque profile. The myoelectric controller used electromyography (EMG) of lower limb muscles to produce a proportional control signal for the hip exoskeleton. Each subject performed two 30-min exoskeleton walking trials (1.0 m/s) using each controller and a 10-min trial with the exoskeleton unpowered. During each trial, we measured subjects' metabolic cost of walking, lower limb EMG profiles, and joint kinematics and kinetics (torques and powers) using a force treadmill and motion capture. Compared to unassisted walking in the exoskeleton, myoelectric control significantly reduced metabolic cost by 13% ( p  = 0.005) and biological hip torque control reduced metabolic cost by 7% ( p  = 0.261). Subjects reduced muscle activity relative to the unpowered condition for a greater number of lower limb muscles using myoelectric control compared to the biological hip torque control. More subjects subjectively preferred the myoelectric controller to the biological hip torque control. Myoelectric control had more advantages (metabolic cost and muscle activity reduction) compared to a controller that targeted a biological torque profile for walking with a robotic hip exoskeleton. However, these results were obtained with a single exoskeleton device with specific control configurations while level walking at a

  2. A Biomechanical Comparison of Proportional Electromyography Control to Biological Torque Control Using a Powered Hip Exoskeleton

    Directory of Open Access Journals (Sweden)

    Aaron J. Young

    2017-06-01

    Full Text Available BackgroundDespite a large increase in robotic exoskeleton research, there are few studies that have examined human performance with different control strategies on the same exoskeleton device. Direct comparison studies are needed to determine how users respond to different types of control. The purpose of this study was to compare user performance using a robotic hip exoskeleton with two different controllers: a controller that targeted a biological hip torque profile and a proportional myoelectric controller.MethodsWe tested both control approaches on 10 able-bodied subjects using a pneumatically powered hip exoskeleton. The state machine controller targeted a biological hip torque profile. The myoelectric controller used electromyography (EMG of lower limb muscles to produce a proportional control signal for the hip exoskeleton. Each subject performed two 30-min exoskeleton walking trials (1.0 m/s using each controller and a 10-min trial with the exoskeleton unpowered. During each trial, we measured subjects’ metabolic cost of walking, lower limb EMG profiles, and joint kinematics and kinetics (torques and powers using a force treadmill and motion capture.ResultsCompared to unassisted walking in the exoskeleton, myoelectric control significantly reduced metabolic cost by 13% (p = 0.005 and biological hip torque control reduced metabolic cost by 7% (p = 0.261. Subjects reduced muscle activity relative to the unpowered condition for a greater number of lower limb muscles using myoelectric control compared to the biological hip torque control. More subjects subjectively preferred the myoelectric controller to the biological hip torque control.ConclusionMyoelectric control had more advantages (metabolic cost and muscle activity reduction compared to a controller that targeted a biological torque profile for walking with a robotic hip exoskeleton. However, these results were obtained with a single exoskeleton device with specific

  3. Institutional aspects of proportional water allocation in practice: case of the Odzani River Irrigation Company, Save Catchment, Zimbabwe

    Science.gov (United States)

    Senzanje, A.; van der Zaag, P.

    Under the new Water Act [Government of Zimbabwe, 1998. Water Act, Chapter 20:24, No. 31/98. Government Printers, Harare] of Zimbabwe which abolished the priority date system for the allocation of surface water in a catchment, it is widely believed that the alternative will be the proportional water allocation system. The proportional water allocation system has been practiced by groups of water users in a number of sub-catchments in Zimbabwe including Mupfuri, Mazowe and Odzi River systems, mainly in the form of dam syndicates (groups of users jointly owning a dam) and irrigation companies (groups of irrigators sharing one source of water). This paper presents the practical experiences with, and lessons that can be learnt from proportional water allocation in the Odzani River Irrigation Company (ORIC) on the Odzi River system in Manicaland in Zimbabwe. ORIC was formed under the provisions of the old Water Act after the construction of the canal, and currently has 50 irrigating members. They are engaged in a variety of agricultural enterprises that include crop production, horticulture and dairying. All members have sub-permits (sub-rights) that enable them to draw water, but the company has a single permit to abstract water from the Odzi River into their supply canal. Farmers’ perception and understanding of proportional water allocation varied but generally defined it as getting a certain percentage of water depending on the amount available in the canal and one’s water permit. One of the major sources of problems in ORIC is inequitable access to water arising from water poaching. Overall, ORIC farmers felt that for proportional water allocation to work properly, the services of a fulltime water bailiff are required, farmers must have their own storage facilities, water should be metered, members should participate fully in decision making, politics should be kept to a minimum and conflicts must be resolved internally.

  4. Problem based learning to improve proportional reasoning of students in mathematics learning

    Science.gov (United States)

    Misnasanti, Utami, Ratna Widianti; Suwanto, Fevi Rahmawati

    2017-08-01

    This paper reviews about the using of Problem Based Learning (PBL) to improve proportional reasoning of students in mathematics learning. Mathematics is one of the subjects at school which generally has a goal to help students preparing themselves in this growth century. To achieve the goal of mathematics learning, student's good reasoning is needed as the base of mathematics itself. This reasoning is an ability to think through logic ideas about mathematics concept. One of reasoning mathematics ability is the proportional reasoning. Proportional reasoning is knowing the multiplicative relationship between the base ratio and the proportional situation to which it's applied. Proportional reasoning is important to have by students in learning mathematics. Many topics within the school mathematics require knowledge and understanding of ratio and proportion, for examples problem solving and calculation activities in domains involving scale, probability, percent, rate, trigonometry, equivalence, measurement, the geometry of plane shapes, algebra are assisted through ratio and proportion knowledge. But, the mastership of proportional reasoning ability, of course, can't be apart from teacher's role. In learning, a teacher has to choose and apply the right model so that it can improve the proportional reasoning ability of students. One of the alternative ways which could be applied to improve proportional reasoning ability of students is by applying PBL Model. Applying PBL which based on problem indirectly has trained students to solve every problem in front of them. Thus, applying PBL can improve mathematics proportional reasoning of students in mathematics learning.

  5. Analyzing Proportion Scores as Outcomes for Prevention Trials: A Statistical Primer

    Science.gov (United States)

    Chen, Kehui; Cheng, Yu; Berkout, Olga; Lindhiem, Oliver

    2018-01-01

    In prevention trials, outcomes of interest frequently include data that are best quantified as proportion scores. In some cases, however, proportion scores may violate the statistical assumptions underlying common analytic methods. In this paper, we provide guidelines for analyzing frequency and proportion data as primary outcomes. We describe standard methods including generalized linear regression models to compare mean proportion scores, and examine tools for testing normality and other assumptions for each model. Recommendations are made for instances when the assumptions are not met, including transformations for proportions scores that are non-normal. We also discuss more sophisticated analytical tools to model change in proportion scores over time. The guidelines provide ready-to-use analytical strategies for frequency and proportion data that are commonly encountered in prevention science. PMID:26960687

  6. THE CONCEPT OF DEGRESSIVE AND PROGRESSIVE PROPORTIONALITY AND ITS NORMATIVE AND DESCRIPTIVE APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Haman Jacek

    2017-06-01

    Full Text Available The article discusses the concept of progressive and degressive proportionality of the distribution of parliamentary seats. In the first part are presented axiological sources of the principles of proportionality and progressive and degressive proportionality and the history of degressively proportional apportionments of seats in the European Parliament. The main part of the article is devoted to the formulation of proposals for strict formal definition of degressive and progressive proportionality, and a description of the method of apportionment of seats in the European Parliament based on the strict definition of degressive proportionality and maintaining maximum compatibility with former apportionments adopted in multilateral negotiations. The last part of the article consists of a discussion of the possibilities of adopting the concept of progressive proportionality in the analysis of the functioning of parliamentary electoral systems.

  7. Development of Proportional Pressure Control Valve for Hydraulic Braking Actuator of Automobile ABS

    Directory of Open Access Journals (Sweden)

    Che-Pin Chen

    2018-04-01

    Full Text Available This research developed a novel proportional pressure control valve for an automobile hydraulic braking actuator. It also analyzed and simulated solenoid force of the control valves, and the pressure relief capability test of electromagnetic thrust with the proportional valve body. Considering the high controllability and ease of production, the driver of this proportional valve was designed with a small volume and powerful solenoid force to control braking pressure and flow. Since the proportional valve can have closed-loop control, the proportional valve can replace a conventional solenoid valve in current brake actuators. With the proportional valve controlling braking and pressure relief mode, it can narrow the space of hydraulic braking actuator, and precisely control braking force to achieve safety objectives. Finally, the proposed novel proportional pressure control valve of an automobile hydraulic braking actuator was implemented and verified experimentally.

  8. Design of Optimal Proportional Integral Derivative Based Power System Stabilizer Using Bat Algorithm

    Directory of Open Access Journals (Sweden)

    Dhanesh K. Sambariya

    2016-01-01

    Full Text Available The design of a proportional, derivative, and integral (PID based power system stabilizer (PSS is carried out using the bat algorithm (BA. The design of proposed PID controller is considered with an objective function based on square error minimization to enhance the small signal stability of nonlinear power system for a wide range of operating conditions. Three benchmark power system models as single-machine infinite-bus (SMIB power system, two-area four-machine ten-bus power system, and IEEE New England ten-machine thirty-nine-bus power system are considered to examine the effectiveness of the designed controller. The BA optimized PID based PSS (BA-PID-PSS controller is applied to these benchmark systems, and the performance is compared with controllers reported in literature. The robustness is tested by considering eight plant conditions of each system, representing the wide range of operating conditions. It includes unlike loading conditions and system configurations to establish the superior performance with BA-PID-PSS over-the-counter controllers.

  9. What proportion of international travellers acquire a travel-related illness? A review of the literature.

    Science.gov (United States)

    Angelo, Kristina M; Kozarsky, Phyllis E; Ryan, Edward T; Chen, Lin H; Sotir, Mark J

    2017-09-01

    As international travel increases, travellers may be at increased risk of acquiring infectious diseases not endemic in their home countries. Many journal articles and reference books related to travel medicine cite that between 22-64% of international travellers become ill during or after travel; however, this information is minimal, outdated and limited by poor generalizability. We aim to provide a current and more accurate estimate of the proportion of international travellers who acquire a travel-related illness. We identified studies via PubMed or travel medicine experts, published between January 1, 1976-December 31, 2016 that included the number of international travellers acquiring a travel-related illness. We excluded studies that focused on a single disease or did not determine a rate based on the total number of travellers. We abstracted information on traveller demographics, trip specifics, study enrollment and follow-up and number of ill travellers and their illnesses. Of 743 studies, nine met the inclusion criteria. The data sources were from North America (four studies) and Europe (five studies). Most travellers were tourists, the most frequent destination regions were Asia and Africa, and the median trip duration ranged from 8-21 days. Six studies enrolled participants at the travellers' pre-travel consultation. All studies collected data through either extraction from the medical record, weekly diaries, or pre- and post-travel questionnaires. Data collection timeframes varied by study. Between 6-87% of travellers became ill across all studies. Four studies provided the best estimate: between 43-79% of travellers who frequently visited developing nations (e.g. India, Tanzania, and Kenya) became ill; travellers most frequently reported diarrhoea. This is the most comprehensive assessment available on the proportion of international travellers that develop a travel-related illness. Additional cohort studies would provide needed data to more precisely

  10. Fatigue crack growth of aluminium alloy 7075-T651 under non-proportional mixed mode I and II loads

    Directory of Open Access Journals (Sweden)

    Xiaobo Yu

    2016-10-01

    Full Text Available This study aims to investigate fatigue growth behaviour in AA7075-T651 under non-proportional mixed mode I and II loads. Fatigue tests were performed under cyclic tension and torsion using a thin-walled tubular specimen with a key-hole style crack starter. After the generation of a single-side mode I pre-crack, varied forms of mixed mode loads were applied, which in most cases led to a short distance coplanar growth followed by a long and stable crack path deviation. It was found that under most of the non-proportional mixed mode load cases, the direction of the deviated crack path could not be reasonably predicted using the commonly accepted maximum tangential stress criterion. Meanwhile, in some cases, the crack path directions could be approximately predicted using the maximum shear stress criterion. It was also confirmed for the first time that a long, stable and noncoplanar shear mode fatigue crack growth could be produced in AA7075T651 under non-proportional mixed mode I and II loads. ©2016 Commonwealth of Australia

  11. Verbal and perceptual analogical reasoning and proportional metaphor comprehension in young children.

    Science.gov (United States)

    Nippold, M A; Sullivan, M P

    1987-09-01

    In contrast to the common assumption that young children have little or no ability to reason by analogy or to comprehend proportional metaphors, the present study demonstrated that children as young as age 5 years have an emerging ability to solve both verbal and perceptual proportional analogy problems and to detect the meanings of proportional metaphoric sentences. These results were largely because the experimental tasks were designed to minimize the number of factors that would restrict the performance of young children. The results indicated that the years between 5 and 7 mark a steady improvement in analogical reasoning and proportional metaphor comprehension, but that children ages 5, 6, and 7 display a wide-ranging ability in these areas. It was also found that perceptual analogical reasoning was statistically related to verbal analogical reasoning and to proportional metaphor comprehension, and that perceptual analogical reasoning and proportional metaphor comprehension were both statistically related to receptive vocabulary development.

  12. Growth Optimal Portfolio Selection Under Proportional Transaction Costs with Obligatory Diversification

    International Nuclear Information System (INIS)

    Duncan, T.; Pasik Duncan, B.; Stettner, L.

    2011-01-01

    A continuous time long run growth optimal or optimal logarithmic utility portfolio with proportional transaction costs consisting of a fixed proportional cost and a cost proportional to the volume of transaction is considered. The asset prices are modeled as exponent of diffusion with jumps whose parameters depend on a finite state Markov process of economic factors. An obligatory portfolio diversification is introduced, accordingly to which it is required to invest at least a fixed small portion of our wealth in each asset.

  13. The proportion valid effect in covert orienting: strategic control or implicit learning?

    Science.gov (United States)

    Risko, Evan F; Stolz, Jennifer A

    2010-03-01

    It is well known that the difference in performance between valid and invalid trials in the covert orienting paradigm (i.e., the cueing effect) increases as the proportion of valid trials increases. This proportion valid effect is widely assumed to reflect "strategic" control over the distribution of attention. In the present experiments we determine if this effect results from an explicit strategy or implicit learning by probing participant's awareness of the proportion of valid trials. Results support the idea that the proportion valid effect in the covert orienting paradigm reflects implicit learning not an explicit strategy.

  14. Adaptive Hybrid Fuzzy-Proportional Plus Crisp-Integral Current Control Algorithm for Shunt Active Power Filter Operation

    Directory of Open Access Journals (Sweden)

    Nor Farahaida Abdul Rahman

    2016-09-01

    Full Text Available An adaptive hybrid fuzzy-proportional plus crisp-integral current control algorithm (CCA for regulating supply current and enhancing the operation of a shunt active power filter (SAPF is presented. It introduces a unique integration of fuzzy-proportional (Fuzzy-P and crisp-integral (Crisp-I current controllers. The Fuzzy-P current controller is developed to perform gain tuning procedure and proportional control action. This controller inherits the simplest configuration; it is constructed using a single-input single-output fuzzy rule configuration. Thus, an execution of few fuzzy rules is sufficient for the controller’s operation. Furthermore, the fuzzy rule is developed using the relationship of currents only. Hence, it simplifies the controller development. Meanwhile, the Crisp-I current controller is developed to perform integral control action using a controllable gain value; to improve the steady-state control mechanism. The gain value is modified and controlled using the Fuzzy-P current controller’s output variable. Therefore, the gain value will continuously be adjusted at every sample period (or throughout the SAPF operation. The effectiveness of the proposed CCA in regulating supply current is validated in both simulation and experimental work. All results have proven that the SAPF using the proposed CCA is capable to regulate supply current during steady-state and dynamic-state operations. At the same time, the SAPF is able to enhance its operation in compensating harmonic currents and reactive power. Furthermore, the implementation of the proposed CCA has resulted more stable dc-link voltage waveform.

  15. Control of Single-Stage Single-Phase PV inverter

    DEFF Research Database (Denmark)

    Ciobotaru, Mihai; Teodorescu, Remus; Blaabjerg, Frede

    2005-01-01

    In this paper the issue of control strategies for single-stage photovoltaic (PV) inverter is addressed. Two different current controllers have been implemented and an experimental comparison between them has been made. A complete control structure for the single-phase PV system is also presented......-forward; - and the grid current controller implemented in two different ways, using the classical proportional integral (PI) and the novel proportional resonant (PR) controllers. The control strategy was tested experimentally on 1.5 kW PV inverter........ The main elements of the PV control structure are: - a maximum power point tracker (MPPT) algorithm using the incremental conductance method; - a synchronization method using the phase-locked-loop (PLL), based on delay; - the input power control using the dc voltage controller and power feed...

  16. proportional counting chamber for large-area-coated β sources

    Indian Academy of Sciences (India)

    Keywords. Surface contamination; windowless proportional counter; beta counting chamber; large area coated sources. Abstract. Detection system for measuring absolute emission rate from large-area-coated β sources has been indigenously developed. The system consists of a multiwire-based proportional counter with ...

  17. A study of the slope of cox proportional hazard and Weibull models ...

    African Journals Online (AJOL)

    However, when the distributional assumptions for Weibull Model is not satisfied, Cox Proportional Hazard Model will be used, although semi-parametric, because it possessed a similar characteristic of covariates inclusion. The main objective of this research work is to determine if the cox proportional hazard model depend ...

  18. Child Proportional Scaling: Is 1/3 = 2/6 = 3/9 = 4/12?

    Science.gov (United States)

    Boyer, Ty W.; Levine, Susan C.

    2012-01-01

    The current experiments examined the role of scale factor in children's proportional reasoning. Experiment 1 used a choice task and Experiment 2 used a production task to examine the abilities of kindergartners through fourth-graders to match equivalent, visually depicted proportional relations. The findings of both experiments show that accuracy…

  19. Model of predicting proportion of diesel fuel and engine oil in diesel ...

    African Journals Online (AJOL)

    Viscosity of diesel adulterated SAE 40 engine oil at varying proportions of the mixture is presented. Regression, variation of intercept and the power parameters methods are used for developing polynomial and power law functions for predicting proportion of either diesel or engine oil in diesel adulterated SAE 40 engine oil ...

  20. Performance of microstrip proportional counters for x-ray astronomy on spectrum-roentgen-gamma

    DEFF Research Database (Denmark)

    Budtz-Jørgensen, Carl; BAHNSEN, A; Christensen, Finn Erland

    1991-01-01

    DSRI will provide a set of four imaging proportional counters for the Danish-Soviet X-ray telescopes XSPECT/SODART. The sensor principle is based on the novel micro-strip proportional counter (MSPC), where the strip electrodes are deposited by photolithography onto a rigid substrate. The MSPC off...

  1. Attending to Relations: Proportional Reasoning in 3- to 6-Year-Old Children

    Science.gov (United States)

    Hurst, Michelle A.; Cordes, Sara

    2018-01-01

    When proportional information is pit against whole number numerical information, children often attend to the whole number information at the expense of proportional information (e.g., indicating 4/9 is greater than 3/5 because 4 > 3). In the current study, we presented younger (3- to 4-year-olds) and older (5- to 6-year-olds) children a task…

  2. Adjusted Wald Confidence Interval for a Difference of Binomial Proportions Based on Paired Data

    Science.gov (United States)

    Bonett, Douglas G.; Price, Robert M.

    2012-01-01

    Adjusted Wald intervals for binomial proportions in one-sample and two-sample designs have been shown to perform about as well as the best available methods. The adjusted Wald intervals are easy to compute and have been incorporated into introductory statistics courses. An adjusted Wald interval for paired binomial proportions is proposed here and…

  3. Proportion Congruency and Practice: A Contingency Learning Account of Asymmetric List Shifting Effects

    Science.gov (United States)

    Schmidt, James R.

    2016-01-01

    Performance is impaired when a distracting stimulus is incongruent with the target stimulus (e.g., "green" printed in red). This congruency effect is decreased when the proportion of incongruent trials is increased, termed the proportion congruent effect. This effect is typically interpreted in terms of the adaptation of attention in…

  4. Make Your Own Paint Chart: A Realistic Context for Developing Proportional Reasoning with Ratios

    Science.gov (United States)

    Beswick, Kim

    2011-01-01

    Proportional reasoning has been recognised as a crucial focus of mathematics in the middle years and also as a frequent source of difficulty for students (Lamon, 2007). Proportional reasoning concerns the equivalence of pairs of quantities that are related multiplicatively; that is, equivalent ratios including those expressed as fractions and…

  5. The role of misclassification in estimating proportions and an estimator of misclassification probability

    Science.gov (United States)

    Patrick L. Zimmerman; Greg C. Liknes

    2010-01-01

    Dot grids are often used to estimate the proportion of land cover belonging to some class in an aerial photograph. Interpreter misclassification is an often-ignored source of error in dot-grid sampling that has the potential to significantly bias proportion estimates. For the case when the true class of items is unknown, we present a maximum-likelihood estimator of...

  6. Children's and Adults' Automatic Processing of Proportion in a Stroop-Like Task

    Science.gov (United States)

    Yang, Ying; Hu, Qingfen; Wu, Di; Yang, Shuqi

    2015-01-01

    This current study examined human children's and adults' automatic processing of proportion using a Stroop-like paradigm. Preschool children and university students compared the areas of two sectors that varied not only in absolute areas but also in the proportions they occupied in their original rounds. A congruity effect was found in both age…

  7. Improved Margin of Error Estimates for Proportions in Business: An Educational Example

    Science.gov (United States)

    Arzumanyan, George; Halcoussis, Dennis; Phillips, G. Michael

    2015-01-01

    This paper presents the Agresti & Coull "Adjusted Wald" method for computing confidence intervals and margins of error for common proportion estimates. The presented method is easily implementable by business students and practitioners and provides more accurate estimates of proportions particularly in extreme samples and small…

  8. Proportional-integral and proportional-integral-derivative-based cyclic sleep controllers with anti-windup technique for energy-efficient and delay-aware passive optical networks

    Science.gov (United States)

    Kikuchi, Takahiro; Kubo, Ryogo

    2016-08-01

    In energy-efficient passive optical network (PON) systems, the increase in the queuing delays caused by the power-saving mechanism of optical network units (ONUs) is an important issue. Some researchers have proposed quality-of-service (QoS)-aware ONU cyclic sleep controllers in PON systems. We have proposed proportional (P) and proportional-derivative (PD)-based controllers to maintain the average queuing delay at a constant level regardless of the amount of downstream traffic. However, sufficient performance has not been obtained because of the sleep period limitation. In this paper, proportional-integral (PI) and proportional-integral-derivative (PID)-based controllers considering the sleep period limitation, i.e., using an anti-windup (AW) technique, are proposed to improve both the QoS and power-saving performance. Simulations confirm that the proposed controllers provide better performance than conventional controllers in terms of the average downstream queuing delay and the time occupancy of ONU active periods.

  9. The effects of hydrogen proportion on the synthesis of carbon nanomaterials with gaseous detonation (deflagration) method

    Science.gov (United States)

    Zhao, Tiejun; Li, Xiaojie; Lee, John H. S.; Yan, Honghao

    2018-02-01

    Using ferrocene, H2 and O2, Carbon nanomaterials were prepared with gaseous detonation (deflagration) method. The effects of H2 on the phase and morphology of carbon nanomaterials were studied by various proportions of H2 in the reaction. The prepared samples were characterized by x-ray diffractometer, transmission electron microscope and Raman spectrometer. The results show that hydrogen proportion has a great influence on the phase and morphology of carbon nanomaterials. The high hydrogen proportion leads to much unreacted hydrogen, which could protect the iron atom from oxidation of carbon and dilute the reactants contributing to uniform particle size. In addition, the graphitization degree of multi-walled carbon nanotubes, observed in samples with high H2 proportion, is high enough to see the lattice fringes, but the degree of graphitization of whole sample is lower than which fabricated with low H2 proportion, and it may result from the low energy generation.

  10. Attending to relations: Proportional reasoning in 3- to 6-year-old children.

    Science.gov (United States)

    Hurst, Michelle A; Cordes, Sara

    2018-03-01

    When proportional information is pit against whole number numerical information, children often attend to the whole number information at the expense of proportional information (e.g., indicating 4/9 is greater than 3/5 because 4 > 3). In the current study, we presented younger (3- to 4-year-olds) and older (5- to 6-year-olds) children a task in which the proportional information was presented either continuously (units cannot be counted) or discretely (countable units; numerical information available). In the discrete conditions, older children showed numerical interference-responding based on the number of pieces instead of the proportion of pieces. However, older children easily overcame this poor strategy selection on discrete trials if they first had some experience with continuous, proportional strategies, suggesting this prevalent reliance on numerical information may be malleable. Younger children, on the other hand, showed difficulty with the proportion task, but showed evidence of proportional reasoning in a simplified estimation-style task, suggesting that younger children may still be developing their proportional and numerical skills in task-dependent ways. Lastly, across both age groups, performance on the proportional reasoning task in continuous contexts, but not discrete contexts, was related to more general analogical reasoning skills. Findings suggest that children's proportional reasoning abilities are actively developing between the ages of 3 and 6 and may depend on domain general reasoning skills. We discuss the implications for this work for both cognitive development and education. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  11. Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population.

    Science.gov (United States)

    Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil

    2013-01-24

    The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

  12. Proportional Systems in the History of Architecture: A Conversation with James S. Ackerman

    Directory of Open Access Journals (Sweden)

    Matthew A Cohen

    2014-06-01

    Full Text Available In November 2010, James S. Ackerman, today the only living participant of the conference ‘De divina proportione’, which was held in Milan in 1951, sat for a video interview that was later shown at the conference ‘Proportional Systems in the History of Architecture’ in Leiden in 2011 to mark the sixtieth anniversary of the Milan conference. In this interview, conducted by Matthew A. Cohen, Ackerman discusses how the study of proportional systems has changed over the past six decades, and thereby provides a unique link between the two conferences. The interview begins with Ackerman’s experiences in northern Italy at the close of World War II, and a few years later at the Milan conference. It considers prevailing twentieth-century attitudes toward proportion up to the time of the conference, and compares them with prevailing medieval and Renaissance attitudes. Ackerman then shares his thoughts on the works and legacies of Rudolf Wittkower, Le Corbusier and Colin Rowe, before exploring the influences of architectural proportional theory on architectural design, and possible relationships between proportional systems and architectural beauty. After exploring changes in the uses of proportional systems that accompanied the rise of Abstract Expressionism, the arc of the interview concludes with Ackerman’s thoughts about the future of proportional systems in light of the evolving role of the computer in architectural practice today.

  13. Shielding concepts for low-background proportional counter arrays in surface laboratories

    International Nuclear Information System (INIS)

    Aalseth, C.E.; Humble, P.H.; Mace, E.K.; Orrell, J.L.; Seifert, A.; Williams, R.M.

    2016-01-01

    Development of ultra low background gas proportional counters has made the contribution from naturally occurring radioactive isotopes – primarily α and β activity in the uranium and thorium decay chains – inconsequential to instrumental sensitivity levels when measurements are performed in above ground surface laboratories. Simple lead shielding is enough to mitigate against gamma rays as gas proportional counters are already relatively insensitive to naturally occurring gamma radiation. The dominant background in these surface laboratory measurements using ultra low background gas proportional counters is due to cosmic ray generated muons, neutrons, and protons. Studies of measurements with ultra low background gas proportional counters in surface and underground laboratories as well as radiation transport Monte Carlo simulations suggest a preferred conceptual design to achieve the highest possible sensitivity from an array of low background gas proportional counters when operated in a surface laboratory. The basis for a low background gas proportional counter array and the preferred shielding configuration is reported, especially in relation to measurements of radioactive gases having low energy decays such as 37 Ar. - Highlights: • Optimization of a cosmic ray shield to measure environmental radioactive gases. • Proportional counter sensitivity may reach ambient environmental 37 Ar concentrations. • Variable length counter method evaluated for low concentration absolute gas counting. • Feasibility of several hour duration preparation of gas samples for 37 Ar measurement.

  14. Effect of donor age on the proportion of mesenchymal stem cells derived from anterior cruciate ligaments.

    Directory of Open Access Journals (Sweden)

    Dae-Hee Lee

    Full Text Available The characteristics of anterior cruciate ligament (ACL-derived mesenchymal stem cells (MSCs, such as proportion and multilineage potential, can be affected by donor age. However, the qualitative and quantitative features of ACL MSCs isolated from younger and older individuals have not yet been compared directly. This study assessed the phenotypic and functional differences in ACL-MSCs isolated from younger and older donors and evaluated the correlation between ACL-MSC proportion and donor age. Torn ACL remnants were harvested from 36 patients undergoing ACL reconstruction (young: 29.67 ± 10.92 years and 33 undergoing TKA (old: 67.96 ± 5.22 years and the proportion of their MSCs were measured. The mean proportion of MSCs was slightly higher in older ACL samples of the TKA group than of the younger ACL reconstruction group (19.69 ± 8.57% vs. 15.33 ± 7.49%, p = 0.024, but the proportions of MSCs at passages 1 and 2 were similar. MSCs from both groups possessed comparable multilineage potentiality, as they could be differentiated into adipocytes, osteocytes, and chondrocytes at similar level. No significant correlations were observed between patient age and MSC proportions at passages 0-2 or between age and MSC proportion in both the ACL reconstruction and TKA groups. Multiple linear regression analysis found no significant predictor of MSC proportion including donor age for each passage. Microarray analysis identified several genes that were differentially regulated in ACL-MSCs from old TKA patients compared to young ACL reconstruction patients. Genes of interest encode components of the extracellular matrix (ECM and may thus play a crucial role in modulating tissue homeostasis, remodeling, and repair in response to damage or disease. In conclusion, the proportion of freshly isolated ACL-MSC was higher in elderly TKA patients than in younger patients with ACL tears, but their phenotypic and multilineage potential were comparable.

  15. Proportional odds model applied to mapping of disease resistance genes in plants

    Directory of Open Access Journals (Sweden)

    Maria Helena Spyrides-Cunha

    2000-03-01

    Full Text Available Molecular markers have been used extensively to map quantitative trait loci (QTL controlling disease resistance in plants. Mapping is usually done by establishing a statistical association between molecular marker genotypes and quantitative variations in disease resistance. However, most statistical approaches require a continuous distribution of the response variable, a requirement not always met since evaluation of disease resistance is often done using visual ratings based on an ordinal scale of disease severity. This paper discusses the application of the proportional odds model to the mapping of disease resistance genes in plants amenable to expression as ordinal data. The model was used to map two resistance QTL of maize to Puccinia sorghi. The microsatellite markers bngl166 and bngl669, located on chromosomes 2 and 8, respectively, were used to genotype F2 individuals from a segregating population. Genotypes at each marker locus were then compared by assessing disease severity in F3 plants derived from the selfing of each genotyped F2 plant based on an ordinal scale severity. The residual deviance and the chi-square score statistic indicated a good fit of the model to the data and the odds had a constant proportionality at each threshold. Single-marker analyses detected significant differences among marker genotypes at both marker loci, indicating that these markers were linked to disease resistance QTL. The inclusion of the interaction term after single-marker analysis provided strong evidence of an epistatic interaction between the two QTL. These results indicate that the proportional odds model can be used as an alternative to traditional methods in cases where the response variable consists of an ordinal scale, thus eliminating the problems of heterocedasticity, non-linearity, and the non-normality of residuals often associated with this type of data.Marcadores moleculares têm sido extensivamente usados para o mapeamento de loci de

  16. The Effect of IFRS Convergence and the Proportion of Woman in Audit Committee on Earning Management

    Directory of Open Access Journals (Sweden)

    Siswanti Dwi Surti

    2017-01-01

    Full Text Available This study aims to find empirical evidence the effect of IFRS convergence and the proportion of woman in audit committee on earning management. Respondents used in this study were companies listed in Jakarta Stock Exchange for the year 2011 until 2013. Using moderated regression analysis this study supports the hypothesis that IFRS convergence and the proportion of woman in audit committee have negative effect on earning management. This finding implies that IFRS convergence and the proportion of woman in audit committee will increase the quality of financial reporting.

  17. Impact of Genes and Proportional Contribution of Parental Genotypes to Inheritance of Root Yield and Sugar Content in Diploid Hybrids of Sugar Beet

    Directory of Open Access Journals (Sweden)

    Ivica Stancic

    2014-01-01

    Full Text Available This paper analyzes the impact of genes and proportional contribution of parental genotypes on the inheritance of root yield and sugar content in diploid hybrids of sugar beet. The survey included two diploid male-sterile monogerm lines and three single (SC male-sterile hybrids as maternal components, while three multigerm diploids were used as pollinators. The partitioning of genotypic variance into additive and dominant components was performed by half sibling (HS and full sibling (FS covariance. The proportional contribution of individual components of crossbreeding (lines, testers, and interactions was exhibited in the expression of certain characteristics of F1 generation. Genotypic variance components showed a significant effect of nonadditive gene action (dominance in the inheritance of root yield and sugar content, while the additive effect of genes was less significant. Maternal components had a greater proportional contribution to root yield, while lines, pollinators, and their interactions had an equal contribution to sugar content.

  18. Extraction of bioavailable proportion of metals in aerosol and street dust

    OpenAIRE

    Coufalík, Pavel

    2014-01-01

    The determination of total contents and bioavailable proportions of selected metals in street dust, urban aerosol and emissions from biofuel combustion was performed in this research. Extraction solutions simulating body fluids evinced significantly different extraction ability.

  19. Influence of proportional number relationships on item accessibility and students' strategies

    Science.gov (United States)

    Carney, Michele B.; Smith, Everett; Hughes, Gwyneth R.; Brendefur, Jonathan L.; Crawford, Angela

    2016-12-01

    Proportional reasoning is important to students' future success in mathematics and science endeavors. More specifically, students' fluent and flexible use of scalar and functional relationships to solve problems is critical to their ability to reason proportionally. The purpose of this study is to investigate the influence of systematically manipulating the location of an integer multiplier—to press the scalar or functional relationship—on item difficulty and student solution strategies. We administered short-answer assessment forms to 473 students in grades 6-8 (approximate ages 11-14) and analyzed the data quantitatively with the Rasch model to examine item accessibility and qualitatively to examine student solution strategies. We found that manipulating the location of the integer multiplier encouraged students to make use of different aspects of proportional relationships without decreasing item accessibility. Implications for proportional reasoning curricular materials, instruction, and assessment are addressed.

  20. Federal Report Shows Drop in Proportion of Children in US Population

    Science.gov (United States)

    ... shows drop in proportion of children in US population Annual statistics compilation forecasts increasing diversity. The number ... slightly, as did the percentage of the U.S. population who are children, according to the federal government’s ...

  1. High proportion of smaller ranged hummingbird species coincides with ecological specialization across the Americas

    DEFF Research Database (Denmark)

    Sonne, Jesper; Martín González, Ana M.; Maruyama, Pietro K.

    2016-01-01

    Ecological communities that experience stable climate conditions have been speculated to preserve more specialized interspecific associations and have higher proportions of smaller ranged species (SRS). Thus, areas with disproportionally large numbers of SRS are expected to coincide geographicall...

  2. Le Corbusier’s Modulor and the Debate on Proportion in France

    Directory of Open Access Journals (Sweden)

    Jean-Louis Cohen

    2014-09-01

    Full Text Available Finally codified in 1945 after several years of research, Le Corbusier’s Modulor is probably the most comprehensive proportional system imagined during the 20th century. Developed through contacts with consultants such as art historian Elisa Maillard, and referring to statistical measurements of the human body, the Modulor concluded decades of discourse on proportions, a theme that preoccupied Le Corbusier ever since his sojourn in Germany in 1910. Matila Ghyka’s work on the golden section was one of the sources for the Modulor, but his work in general was used by other architects, such as Le Corbusier’s rival André Lurçat, who proposed his own range of proportions related to the work of builders as much as to that of designers. Proportions thus became a central issue in the postwar French reconstruction, as architects struggled to maintain their status amid changing procedures in building production.

  3. Proportion of Uterine Malignant Tumors in Patients with Laparoscopic Myomectomy: A National Multicenter Study in China

    Directory of Open Access Journals (Sweden)

    Hua Yang

    2017-01-01

    Conclusions: The proportion of malignancy is low after using morcellation in patients who undergo laparoscopic myomectomy. Patients with fast-growing uterine fibroids and abnormal ultrasonic tumor blood flow should be considered for malignant potential, and morcellation should be avoided.

  4. Epistemological Obstacles on the Topic of Ratio and Proportion among Junior High School Students

    Science.gov (United States)

    Wahyuningrum, A. S.; Suryadi, D.; Turmudi

    2017-09-01

    This study intends to investigate how students’ understanding of ratio and proportion concept indicates epistemological obstacles. It was part of Didactical Design Research which was conducted to 72 students of 8th grade who ever learned about ratio and proportion. Data were collected through the students’ answers and interview in solving ratio and proportion problems. The results show that students’ conception, the ways of applying other mathematical concepts, the ways of using the rules, and variety of contexts are factors influencing epistemological obstacles in teaching and learning of ratio and proportion. These conditions can affect the students’ understanding o f related mathematics topics. Based on analysis of the results, this study is expected to overcome or minimize the epistemological obstacles.

  5. Opportunities and Challenges of AC/DC Transmission Network Planning Considering High Proportion Renewable Energy

    Directory of Open Access Journals (Sweden)

    Arslan Habib

    2018-03-01

    Full Text Available The time and space distribution characteristics of future high proportion of renewable energy sources will bring unprecedented challenges to the electric power system’s processing and planning, the basic form of electric power system and operating characteristics will have fundamental changes. Based on the research status quo at home and abroad, this paper expounds the four scientific problems of the transmission network planning with high proportion of renewable energy. Respectively, from the network source collaborative planning, transmission network flexible planning. With the distribution network in conjunction with the transmission network planning, transmission planning program comprehensive evaluation and decision-making methods. This paper puts forward the research ideas and framework of transmission network planning considering the high proportion of renewable energy. At the end, the future high proportion of (renewable energy grid-connected transmission network’s opportunities and challenges are presented.

  6. Equality of Shapley value and fair proportion index in phylogenetic trees.

    Science.gov (United States)

    Fuchs, Michael; Jin, Emma Yu

    2015-11-01

    The Shapley value and the fair proportion index of phylogenetic trees have been introduced recently for the purpose of making conservation decisions in genetics. Moreover, also very recently, Hartmann (J Math Biol 67:1163-1170, 2013) has presented data which shows that there is a strong correlation between a slightly modified version of the Shapley value (which we call the modified Shapley value) and the fair proportion index. He gave an explanation of this correlation by showing that the contribution of both indices to an edge of the tree becomes identical as the number of taxa tends to infinity. In this note, we show that the Shapley value and the fair proportion index are in fact the same. Moreover, we also consider the modified Shapley value and show that its covariance with the fair proportion index in random phylogenetic trees under the Yule-Harding model and uniform model is indeed close to one.

  7. Method for measuring the wire tensions in proportional and drift chambers

    Energy Technology Data Exchange (ETDEWEB)

    Coupland, M. (University Coll., London (UK))

    1983-06-15

    A device to measure the resonant frequency of a proportional chamber wire is described. From this frequency the wire tension can be calculated. The device is self-tuning, and in some instances may be used without opening the chamber.

  8. Le test binomial exact de la différence entre deux proportions et ses approximations [The exact binomial test between two proportions and its approximations

    Directory of Open Access Journals (Sweden)

    Laurencelle, Louis

    2017-05-01

    Full Text Available Though it is a commonplace and quite frequent operation, the comparison of two independent proportions remains a problematic and ill understood issue in textbooks on applied statistics and for researchers. On the one hand, the comparison may be arrayed as a $2 \\times 2$ contingency table and be referred to chi-square type calculations; on the other hand, it can be viewed as the difference between means based on 0 / 1 data, this perspective leading to alternative normal-type treatments. The main known solutions for deciding upon the difference between two proportions are reviewed and briefly discussed. An original, theoretically deduced solution that we deem `exact' is then proposed. We conclude with a short numerical study that endorses two well-known approximate solutions. Résumé: Situation statistique banale, voire quotidiennement rencontrée, la comparaison de deux proportions indépendantes demeure une opération problématique dans les ouvrages de statistique appliquée comme dans la pratique. D'un côté, cette comparaison peut être présentée dans le format d'un tableau de contingence $2\\times 2$, ce qui l'associe aux statistiques habituelles d'un tel tableau; d'un autre côté, la différence entre deux proportions équivaut à la différence entre deux moyennes indépendantes, en considérant que les valeurs moyennées sont des "0" et des "1", ce cas admettant un autre type de traitement. Nous revoyons ici les principales solutions proposées pour l'étude de la différence entre deux proportions, et nous élaborons par déduction notre propre solution, que nous croyons exacte. Dans une courte étude numérique, nous établissons enfin les vertus de deux approximations déjà connues.

  9. Different proportions of laccase isoenzymes produced by submerged cultures of Trametes versicolor grown on lignocellulosic wastes.

    Science.gov (United States)

    Moldes, D; Lorenzo, M; Sanromán, Ma A

    2004-02-01

    The white-rot fungus Trametes versicolor grown in submerged culture produced two laccase isoenzymes, LacI and LacII. Addition of insoluble lignocellulosic materials into the culture medium increased the total laccase activity. The proportion of laccase isoenzymes also changed depending on the lignocellulosic material employed, with ratios of activity LacII/LacI from 0.9 (barley straw) to 4.4 (grape stalks). Besides, this proportion played an important role in the dye decolourisation.

  10. Some aspects of the use of proton recoil proportional counters for fast neutron personnel dosimeters

    International Nuclear Information System (INIS)

    Yule, T.J.; Bennett, E.F.

    1984-01-01

    Gas-filled proton recoil proportional counters have been used extensively for the measurement of neutron spectra in degraded fission-spectrum environments. Some considerations relating to the use of these counters for personnel dosimetry are here described. High sensitivity and good accuracy in the determination of dose-equivalent can be obtained if relatively high pressure hydrogen-filled proportional counters are used as the active element in a dosimeter system

  11. Computer Simulation of Atoms Nuclei Structure Using Information Coefficients of Proportionality

    OpenAIRE

    Labushev, Mikhail M.

    2012-01-01

    The latest research of the proportionality of atomic weights of chemical elements made it possible to obtain 3 x 3 matrices for the calculation of information coefficients of proportionality Ip that can be used for 3D modeling of the structure of atom nucleus. The results of computer simulation show high potential of nucleus structure research for the characterization of their chemical and physical properties.

  12. Control programs for proportional chambers and electronics on-line with the M-6000 computer

    International Nuclear Information System (INIS)

    Baranov, V.A.

    1978-01-01

    Control programs for hardware in CAMAC standard, for proportional chamber electronics and proportional chambers themselves on-line with the M-6000 computer are described. A subprogram has been developed which enables to realize all functions possible with the KK004 controller. Programs intended to recognize errors in hardware operation were developed together with those providing for a possibility to take curves of delayed coincidences at different strobe widths, and to determine a part of clusters depending on the strobe delay time

  13. Estimation of Sensitive Proportion by Randomized Response Data in Successive Sampling

    Directory of Open Access Journals (Sweden)

    Bo Yu

    2015-01-01

    Full Text Available This paper considers the problem of estimation for binomial proportions of sensitive or stigmatizing attributes in the population of interest. Randomized response techniques are suggested for protecting the privacy of respondents and reducing the response bias while eliciting information on sensitive attributes. In many sensitive question surveys, the same population is often sampled repeatedly on each occasion. In this paper, we apply successive sampling scheme to improve the estimation of the sensitive proportion on current occasion.

  14. Time-trend and variations in the proportion of second-eye cataract surgery

    Directory of Open Access Journals (Sweden)

    Bernal-Delgado Enrique

    2007-04-01

    Full Text Available Abstract Background Despite recommendations for greater use of second-eye cataract surgery and the bilateral progression of the disease, there is a substantial proportion of unmet need for this treatment. Few studies have explored the factors associated with second-eye cataract surgery utilisation. The objective of our study was to estimate the proportion of second-eye cataract surgery, evaluate its time-trend, and explore differences in utilisation by patients' gender, age, and region of residence. Methods All senile cataract surgeries performed between 1999 and 2002 in the public health system of Catalonia (Spain were obtained from the Minimum Data Set. The proportion of second-eye surgery from November 2000 to December 2002 was calculated. The time-trend of this proportion was characterised through linear regression models with the logarithmic transformation of time. Results The proportion of second-eye surgery was 30.0% and showed an increasing trend from 24.8% (95% Confidence Interval [CI] 21.6; 26.1 in November 2000 to 31.8% (95% CI 31.4; 33.6 in December 2002. This proportion was 1.9% (95% CI 0.9; 2.9 higher in women (p Conclusion We predict greater utilization of second-eye surgery in patients aged 70 to 79 years and in women. A greater increase in the utilisation rates of second-eye surgery is expected in the regions with lower proportions and in older patients. The observed trend suggests that there will be a substantial proportion of unmet need for bilateral surgery.

  15. Scamozzi’s Orders and Proportions: An End to Illusions or a Visionary Harbinger?

    Directory of Open Access Journals (Sweden)

    Franco Barbieri

    2015-01-01

    Full Text Available While many studies have addressed the issue of proportions in the work of Palladio, both in the orders and in the forms and dimensions of architecture, very little interest has been shown in Vincenzo Scamozzi’s handling of this theme. This article examines Scamozzi’s influential published commentary regarding the proportions of the orders, rooms, and entire buildings, and draws numerous comparisons with Palladio. It interprets Scamozzi as a bridge linking the Renaissance with Enlightenment thinking.

  16. A simple GMM estimator for the semi-parametric mixed proportional hazard model

    OpenAIRE

    Bijwaard, G.E.; Ridder, G.; Woutersen, T.

    2012-01-01

    Ridder and Woutersen (Ridder, G., and T. Woutersen. 2003. “The Singularity of the Efficiency Bound of the Mixed Proportional Hazard Model.” Econometrica 71: 1579–1589) have shown that under a weak condition on the baseline hazard, there exist root-N consistent estimators of the parameters in a semiparametric Mixed Proportional Hazard model with a parametric baseline hazard and unspecified distribution of the unobserved heterogeneity. We extend the linear rank estimator (LRE) of Tsiatis (Tsiat...

  17. Multi-wire proportional chamber for ultra-cold neutron detection

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.L. [Physics Division, Group P-25, Mail Stop H846, Los Alamos National Laboratory, Los Alamos, NM 87544 (United States)], E-mail: cmorris@lanl.gov; Bowles, T.J.; Gonzales, J.; Hill, R.; Hogan, G.; Makela, M.; Mortenson, R.; Ramsey, J.; Saunders, A.; Seestrom, S.J.; Sondheim, W.E.; Teasdale, W. [Physics Division, Group P-25, Mail Stop H846, Los Alamos National Laboratory, Los Alamos, NM 87544 (United States); Back, H.O.; Pattie, R.W.; Holley, A.T.; Young, A.R. [North Carolina State University, Raleigh, NC 27695 (United States); Broussard, L.J. [Duke University, Durham, NC 27708 (United States); Hickerson, K.P.; Liu, J.; Mendenhall, M.P. [California Institute of Technology, Pasadena, CA 91125 (United States)] (and others)

    2009-02-11

    In this paper we describe the principles that have guided our design and the experience we have gained building multi-wire proportional chambers detectors for the ultra-cold neutron (UCN) source at the Los Alamos Neutron Science Center (LANSCE). Simple robust detectors with 50 cm{sup 2} of active area have been designed. These have been used both in ion chamber and proportional mode for the detection of UCN.

  18. Proportion hyperglycosylated hCG: a new test for discriminating gestational trophoblastic diseases.

    Science.gov (United States)

    Cole, Laurence A

    2014-11-01

    Hyperglycosylated human chorionic gonadotropin (hCG) is a variant of hCG with large oligosaccharide side chains. Although hCG is produced by syncytiotrophoblast cells, hyperglycosylated hCG marks cytotrophoblast cell. Hyperglycosylated hCG signals placental implantation. Total hCG in serum and urine is measured by the Siemens Immulite hCG pregnancy test; the result is in milli-international unit per milliliter. Hyperglycosylated hCG is determined by the B152 microtiter plate assay; the result is in nanogram per milliliter. Hyperglycosylated hCG results can be converted to milli-international unit per milliliter equivalents by multiplying by 11. The test measures proportion hyperglycosylated hCG, hyperglycosylated hCG / total hCG. Proportion hyperglycosylated hCG marks cases intent on developing persistent hydatidiform mole (68% detection at 17% false detection). Proportion hyperglycosylated hCG also marks persistent hydatidiform mole (100% detection at 5.1% false detection). Proportion hyperglycosylated hCG distinguishes choriocarcinoma and gestational trophoblastic neoplasm cases, absolutely discriminating aggressive cases and minimally aggressive cases. Proportion hyperglycosylated hCG identifies quiescent gestational trophoblastic disease cases. It recognizes quiescent cases that become persistent disease (100% detection at 0% false positive). Proportion hyperglycosylated hCG is an invaluable test for discriminating gestational trophoblastic diseases.

  19. HUMAN DIGNITY AND PROPORTIONALITY ANALYSIS / A DIGNIDADE HUMANA E A ANÁLISE DA PROPORCIONALIDADE

    Directory of Open Access Journals (Sweden)

    Robert Alexy

    2016-02-01

    Full Text Available The relation between proportionality analysis and human dignity is one of the most contested questions in the debate about the normative structure of human dignity. Two conceptions stand in opposition: an absolute and a relative conception. According to the absolute conception, the guarantee of human dignity counts as a norm that takes precedence over all other norms in all cases. Taking precedence over all other norms in all cases implies that balancing is precluded. This, in turn, means that each and every interference with human dignity is a violation of human dignity. Thus, justified interference with human dignity becomes impossible. By contrast, proportionality analysis is intrinsically connected to the distinction between justified and unjustified interferences. A proportional interference is justified and is, therefore, constitutional. The opposite applies in the case of disproportional interference. The absolute conception is incompatible with this conceptual framework. For this reason, it is incompatible with proportionality analysis. According to the relative conception, precisely the opposite is true. The relative conception says that the question of whether human dignity is violated is a question of proportionality. With this, the relative conception is not only compatible with proportionality analysis, it presupposes it.

  20. Rapid proportion comparison with spatial arrays of frequently used meaningful visual symbols.

    Science.gov (United States)

    Sakuma, Naoto; Kimura, Eiji; Goryo, Ken

    2017-11-01

    It has been shown that when two arrays of Arabic numerals were briefly presented, observers could accurately indicate which array contained the larger number of a target numeral. This study investigated whether this rapid proportion comparison can be extended to other meaningful symbols that share some of notable properties of Arabic numerals. We tested mainly several Japanese Kanji letters, each of which represents a meaning and can work as a word. Using physically identical stimulus sets that could be interpreted as different types of letters, Experiment 1 first confirmed the rapid proportion comparison with Arabic numerals for Japanese participants. Experiment 2 showed that the rapid proportion comparison can be extended to Kanji numerals. Experiment 3 successfully demonstrated that rapid proportion judgments can be found with non-quantitative Kanji letters that are used frequently. Experiment 4 further demonstrated the rapid proportion comparison with frequently used meaningful non-letter symbols (gender icons). The rapid processing cannot be attributed to fluent processing of familiar items, because it was not found with familiar phonograms (Japanese Kana letters). These findings suggest that the rapid proportion comparison can be commonly found with frequently used meaningful symbols, even though their meaning is not relevant to the task.

  1. Evaluation of maxillary anterior teeth and their relation to the golden proportion in malaysian population

    Directory of Open Access Journals (Sweden)

    Al-Marzok Maan Ibrahim

    2013-01-01

    Full Text Available Abstract Background The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Methods Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Results Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p  Conclusions The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

  2. Data acquisition system development for the detection of X-ray photons in multi-wire gas proportional counters

    International Nuclear Information System (INIS)

    Kimpton, J.A.; Kinnane, M.N.; Smale, L.F.; Chantler, C.T.; Hudson, L.T.; Henins, A.; Szabo, C.I.; Gillaspy, J.D.; Tan, J.N.; Pomeroy, J.M.; Takacs, E.; Radics, B.

    2007-01-01

    A new data acquisition system coupled to a backgammon-type gas proportional counter capable of single-photon counting over a wide range of count rates has been developed and replaces a CAMAC-based system. The new apparatus possesses improved architecture, interface technology, speed and diagnostic capability. System efficiency and throughput is significantly improved, especially in addressing earlier problems of hardware buffer downloads containing zero or repeat data and inefficient gating control. The new system is a PXI-based data acquisition apparatus including additional electronics, controlled by a graphical programming environment. It allows development of superior diagnostic tools for system optimisation and more stable performance. System efficiency is improved by 10% over a wide range of count rates (0.5 Hz-50 kHz). For the Backgammon Detector type, this represents a significant improvement in performance and applicability over previous systems. Characteristic and few-electron spectra collected on the new acquisition system are illustrated

  3. Breaking of the SU(4) limit for the Gamow-Teller strength in N{proportional_to}Z nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Petermann, I. [Technische Universitaet Darmstadt, Institut fuer Kernphysik, Darmstadt (Germany); Gesellschaft fuer Schwerionenforschung Darmstadt, Darmstadt (Germany); Martinez-Pinedo, G. [Gesellschaft fuer Schwerionenforschung Darmstadt, Darmstadt (Germany); Langanke, K. [Gesellschaft fuer Schwerionenforschung Darmstadt, Darmstadt (Germany); Technische Universitaet Darmstadt, Institut fuer Kernphysik, Darmstadt (Germany); Caurier, E. [Universite Louis Pasteur, Institut de Recherches Subatomiques, Strasbourg (France)

    2007-12-15

    We have performed large-scale shell model calculations of the Gamow-Teller strength distributions in N{proportional_to}Z pf-shell nuclei. These calculations were motivated by the experimental attempts to measure the low-lying GT strength for the even-even N=Z+2 or N=Z-2 nuclei {sup 46}Ti, {sup 50}Cr, {sup 54}Fe and {sup 62}Ge, where a sizable low-energy GT strength could be interpreted as reminiscence of SU(4) symmetry; in the limit of exact SU(4) symmetry the GT{sub -} strength would be concentrated in a single transition to the lowest T=0, J=1{sup +} state in the daughter. We confirm that the SU(4) symmetry is strongly broken by the spin-orbit interaction and by increasing neutron excess. (orig.)

  4. The proportion of distal fibula Salter-Harris type I epiphyseal fracture in the paediatric population with acute ankle injury

    DEFF Research Database (Denmark)

    Hofsli, Mikael; Torfing, Trine; Al-Aubaidi, Zaid

    2016-01-01

    Ankle injuries are common among the paediatric population. There are few prospective studies utilizing MRI to diagnose a clinically suspected Salter-Harris type I of the distal fibula (SH1FDF). The aim of this study was to examine the proportion of clinically suspected SH1FDF in children. All...... paediatric patients with ankle injury, seen at the emergency room from September 2012 to May 2013 at a single institution, underwent a standardized clinical examination, and their radiographs were obtained if found necessary. All images and data were recorded prospectively and patients suspected of having SH......1FDF were referred for MRI of the ankle joint. Out of 391 paediatric patients seen at the emergency room with ankle injury, 38 patients had a clinical suspicion of SH1FDF. A total of 31 patients, 18 male and 13 female, with a mean age of 10±2.86 years, were included in the study. Only seven patients...

  5. Second-Order Harmonic Reduction Technique for Photovoltaic Power Conditioning Systems Using a Proportional-Resonant Controller

    Directory of Open Access Journals (Sweden)

    Hae-Gwang Jeong

    2013-01-01

    Full Text Available This paper proposes a second-order harmonic reduction technique using a proportional-resonant (PR controller for a photovoltaic (PV power conditioning system (PCS. In a grid-connected single-phase system, inverters create a second-order harmonic at twice the fundamental frequency. A ripple component unsettles the operating points of the PV array and deteriorates the operation of the maximum power point tracking (MPPT technique. The second-order harmonic component in PV PCS is analyzed using an equivalent circuit of the DC/DC converter and the DC/AC inverter. A new feed-forward compensation technique using a PR controller for ripple reduction is proposed. The proposed algorithm is advantageous in that additional devices are not required and complex calculations are unnecessary. Therefore, this method is cost-effective and simple to implement. The proposed feed-forward compensation technique is verified by simulation and experimental results.

  6. Multi-level modelling of the response of the ultraminiature proportional counter: gas gain phenomena and pulse height spectra

    International Nuclear Information System (INIS)

    Olko, P.; Moutarde, C.; Segur, P.

    1995-01-01

    The ultraminiature proportional counters, UMC, unique radiation detectors for monitoring high intensity therapy fields, designed by Kliauga and operated at Columbia University (USA), have yielded a number of pulse height distributions for photons, neutrons and ions at simulated diameters of 5-50 nm. Monte Carlo calculations of the gas gain in such a counter questioned the possibility of achieving proportionally at such low simulated diameters. The response of the UMC has now been modelled taking into account both fluctuations of energy deposited in the counter volume and its calculated gas gain. Energy deposition was calculated using the MOCA-14, MOCA-8 and TRION codes, whereby distributions of ionisations d(j) after irradiations with 137 Cs, 15 MeV neutrons and 7 MeV.amu -1 deuterons were obtained. Monte Carlo calculations of electron avalanches in UMC show that the size of the single-electron avalanche P(n) reaching the anode depends strongly on the location of the primary ionisation within the counter volume. Distributions of the size of electron avalanches for higher numbers of primary ionisations, P *j (n), were obtained by successive convolutions of P(n). Finally, the counter response was obtained by weighting P *j (n) over d(j) distributions. On comparing the measured and calculated spectra it was concluded that the previously proposed single-electron peak calibration method might not be valid for the UMC due to the excessive width and overlap of electron avalanche distributions. Better agreement between the measured and calculated spectra is found if broader electron avalanche distributions than those used in the present calculations, are assumed. (author)

  7. A comparison of different methods to estimate species proportions by area in mixed stands

    Directory of Open Access Journals (Sweden)

    Gerald F. Dirnberger

    2014-12-01

    Full Text Available Aim of the study: This paper presents the most appropriate ways to estimate the species proportions by area in mixed stands of Norway spruce (Picea abies L. Karst. and European beech (Fagus sylvatica L. by comparing stand level and individual tree level approaches. It also investigates whether different ways of describing species proportions by area can result in different judgments on the over- or under-yielding of species in mixtures.Area of the study: Three triplets of pure and mixed stands of Norway spruce and European beech in three locations in the northeast of Austria are investigated. The three locations differ considerably in slope, bedrock and soil type as well as in site index.Material and Methods: In all 9 plots the coordinates of all trees, their dbh, height, height to the crown base and five year increment were measured. The potentially available areas of individual trees are calculated by Voronoi- diagrams and potential densities are estimated from the comparable pure stands, yield tables, and published equations for maximum basal area and Reineke’s maximum density line.Main results: The species proportions estimated by the individual tree approach with leaf area as growth characteristic gave the best fit with the stand approach with the most appropriate, regional maximum basal area equations. By using various definitions of species proportions, in the worst case the mixing effects on individual species can be seriously over- or underestimated while the mixing effects on the total increment is only negligibly affected.Research highlightsMeasures of species proportions by area are needed for comparing growth per hectare of a species in a mixed stand with that of the same species in a pure standSpecies proportions at the stand level are based on estimates of the species’ potential densities, either in terms of maximum basal area or of maximum stand density indexSpecies proportions at the tree level are derived from the area

  8. Space-charge effects of the proportional counters in a multiple-ionization chamber

    International Nuclear Information System (INIS)

    Mang, M.

    1993-01-01

    At the ALADIN spectrometer of the GSI in october 1991 for the first time the new multiple ionization chamber was applied, in the two anode planes of which are additional multiwire-proportional counters. The proportional counters are required in order to make the detection of light fragments (Z 4 gold projectiles per second by these positive space charges the homogeneous electric field of the MUSIC is disturbed. This effect is especially strong in the beam plane. As consequence of the space charge additionally electrons are focused on the proportional counter so that their amplitudes in dependence on the beam intensity increase up to the 2.5-fold. Furthermore the y coordinate is falsified, because the electrons are diverted to the medium plane. On the measurement of the x coordinate this diversion has with maximally 0.1% only a small influence. These space-charge effects can be qualitatively described by a schematic model, which assumes a stationary positive space charge. Additionally for the proportional counters, which are not in the beam plane, their resolution was determined. In these counters the space-charge effects are small, because essentially fewer particles are registrated than in the medium MWPC's. By this charges of fragments with Z<10 could be separated. The charge resolution amounted at lithium 0.8 charge units. The position resolution of the proportional counters in y direction was determined to less than 8 mm. The detection probability of the fragments amounts for lithium 90% and from boron all fragments are detected

  9. Novel concept for neutron detection: proportional counter filled with 10B nanoparticle aerosol

    Science.gov (United States)

    Amaro, F. D.; Monteiro, C. M. B.; dos Santos, J. M. F.; Antognini, A.

    2017-01-01

    The high neutron detection efficiency, good gamma-ray discrimination and non-toxicity of 3He made of proportional counters filled with this gas the obvious choice for neutron detection, particularly in radiation portal monitors (RPM), used to control the illicit transport of nuclear material, of which neutron detectors are key components. 3He is very rare and during the last decade this gas has become increasingly difficult to acquire. With the exception of BF3, which is toxic, no other gas can be used for neutron detection in proportional counters. We present an alternative where the 3He atoms are replaced by nanoparticles made of another neutron sensitive material, 10B. The particles are dispersed in a gaseous volume, forming an aerosol with neutron sensitive properties. A proportional counter filled with such aerosol was exposed to a thermal neutron beam and the recorded response indicates that the neutrons have interacted with the particles in the aerosol. This original technique, which transforms a standard proportional gas mixture into a neutron sensitive aerosol, is a breakthrough in the field of radiation detection and has the potential to become an alternative to the use of 3He in proportional counters. PMID:28181520

  10. A development of gas scintillation proportional counter for space observations of cosmic x-rays

    International Nuclear Information System (INIS)

    Inoue, H.; Koyama, K.; Mae, T.; Matsuoka, M.; Ohashi, T.

    1978-01-01

    Gas Scintillation proportional counter has been developed for the space observation of cosmic X-rays. This technique provides twice as good an energy resolution as that of ordinary proportional counters, hence a powerful tool for the spectroscopy of the X-ray sources. The characteristics of the gas scintillation proportional counter are reviewed, and technical problems are discussed. In particular, the properties for soft X-rays in the energy range 0.1 - 1.5 keV were extensively examined. A significant distortion of the pulse-height distribution due to a low-energy tail is noticed. This feature is interpreted in terms of a loss of primary electrons captured by the entrance window. The influence of impurities on the gain and the resolution is particularly important for the gas scintillation proportional counters and the effect is quantitatively analysed. Gas scintillation proportional counter equipped with the window consisting of very thin polypropylene film is discussed, which was successfully used for rocket observations of cosmic soft X-rays. (author)

  11. A proportional-plus-integral controller for a particle beam weapon

    Science.gov (United States)

    Moose, W. J.

    1984-12-01

    The goal of this thesis is to design a proportional-plus-integral (PI) controller, for use with the Meer filter, to control a particle beam weapon. The device used to measure the beam produces a low signal rate, the Meer filter is used to produce an estimate of the beam position. A type-1, proportional-plus-integral controller is designed using LOG assumptions and dynamic programming to solve the cost function. A sensitivity analysis is performed to determine the system sensitivity to different parameters. A performance analysis is also performed to demonstrate the system robustness to unmodelled errors. The results of these analyses are compared to a type-0, proportional gain controller. In addition the PI controllers ability to regulate to a non-zero setpoint is demonstrated.

  12. ASSESSMENT OF MIX PROPORTIONS FOR DEVELOPING LIGHTWEIGHT CEMENTITIOUS COMPOSITES WITH WOOD WASTES

    Directory of Open Access Journals (Sweden)

    Monica Garcez

    Full Text Available ABSTRACT The main objective of this work was to assess mix proportions for developing lightweight cementitious composites, manufactured with Eucalyptus grandis sawdust. Different wood:cement, water:cement and admixture:cement ratios were used to evaluate physical (water absorption, void ratio and density and mechanical (compressive strength, static and dynamic modulus of elasticity properties of the cement-wood composites. Results shows that, bulk density is directly proportional to the compressive strength and elastic modulus, and inversely proportional to the percentage of timber, considering composites with same water:cement ratio, without superplasticizer. The performance of the cement-wood composites, regarding mechanical properties, can be improved if superplasticizer is used to increase paste fluidity. Higher values of bulk density are related to lower void ratio and water absorption and higher compressive strength and modulus of elasticity.

  13. Golden proportion assessment between maxillary and mandibular teeth on Indian population

    Science.gov (United States)

    Kumar, Vaikunth Vijay; Rangarajan, Vedantham

    2012-01-01

    PURPOSE This study evaluated the existence of golden proportion between the widths of the maxillary and mandibular anterior teeth in Indian population. MATERIALS AND METHODS The clinical tooth width measurements were recorded with the digital vernier calipers on 576 patients of both sexes in the age group of 21 - 30 years. Flexible ruler was used to determine the width of maxillary and mandibular anterior teeth on the patients by the same operator. The data obtained was statistically analyzed using paired student t-test (α=.05). RESULTS The golden proportion was not found between the width of the right central and lateral incisors in 53% of women and 47% of men. The results revealed the golden percentage was rather inconstant in terms of relative tooth width. CONCLUSION The golden proportion is an inappropriate method to relate the successive widths of the maxillary anterior teeth in Indian population. PMID:22737310

  14. Simulation of proportional control of hydraulic actuator using digital hydraulic valves

    Science.gov (United States)

    Raghuraman, D. R. S.; Senthil Kumar, S.; Kalaiarasan, G.

    2017-11-01

    Fluid power systems using oil hydraulics in earth moving and construction equipment have been using proportional and servo control valves for a long time to achieve precise and accurate position control backed by system performance. Such valves are having feedback control in them and exhibit good response, sensitivity and fine control of the actuators. Servo valves and proportional valves are possessing less hysteresis when compared to on-off type valves, but when the servo valve spools get stuck in one position, a high frequency called as jitter is employed to bring the spool back, whereas in on-off type valves it requires lesser technology to retract the spool. Hence on-off type valves are used in a technology known as digital valve technology, which caters to precise control on slow moving loads with fast switching times and with good flow and pressure control mimicking the performance of an equivalent “proportional valve” or “servo valve”.

  15. Mixture proportioning of fly ash-concretes based on mortar strength and flow data

    International Nuclear Information System (INIS)

    Nusrat, A.; Tahir, M.A.

    2008-01-01

    A method of mixture proportioning of fly ash concretes is presented. The method is based on the strength and flow data of a minimum of nine fly ash-cement mortars. The essence of the method is that three fly ash-binder ratios are to be combined with three water-binder ratios in the range of interest. The strength and water demand data are analyzed for constructing mixture proportion charts. The strength vs. water-binder ratio charts are prepared by down-scaling the 50-mm mortar strength to the 150-mm standard concrete cylinders. The method is illustrated with the help of examples. The trial mixtures proportioned using the proposed methods have reasonably achieved the 28 day target strengths. (author)

  16. Examining the Proportion of Dietary Phosphorus From Plants, Animals, and Food Additives Excreted in Urine.

    Science.gov (United States)

    St-Jules, David E; Jagannathan, Ram; Gutekunst, Lisa; Kalantar-Zadeh, Kamyar; Sevick, Mary Ann

    2017-03-01

    Phosphorus bioavailability is an emerging topic of interest in the field of renal nutrition that has important research and clinical implications. Estimates of phosphorus bioavailability, based on digestibility, indicate that bioavailability of phosphorus increases from plants to animals to food additives. In this commentary, we examined the proportion of dietary phosphorus from plants, animals, and food additives excreted in urine from four controlled-feeding studies conducted in healthy adults and patients with chronic kidney disease. As expected, a smaller proportion of phosphorus from plant foods was excreted in urine compared to animal foods. However, contrary to expectations, phosphorus from food additives appeared to be incompletely absorbed. The apparent discrepancy between digestibility of phosphorus additives and the proportion excreted in urine suggests a need for human balance studies to determine the bioavailability of different sources of phosphorus. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  17. Sexually dimorphic proportions of the harbour porpoise (Phocoena phocoena) skeleton

    DEFF Research Database (Denmark)

    Galatius, Anders

    2005-01-01

    compared with males. Measurements of the skull and flipper bones show negative allometry, whereas those of the bones of the body generally show positive allometry. There are no statistically significant intersexual differences in allometry except for the pelvic bones, where the males show stronger positive...... allometry. Throughout the range of individual sizes, females have significantly larger skulls and shorter vertebral columns than males for similarly sized individuals. In fully grown specimens, the condylobasal length of females makes up a smaller proportion of total length, and the vertebrae make up...... a larger proportion as compared with males. As these characters show negative and positive allometry, respectively, it is suggested that males finish their development at an earlier stage than females, retaining more paedomorphic proportions of the skeleton. Paedomorphosis in fully grown males relative...

  18. Statistical power to detect violation of the proportional hazards assumption when using the Cox regression model.

    Science.gov (United States)

    Austin, Peter C

    2018-01-01

    The use of the Cox proportional hazards regression model is widespread. A key assumption of the model is that of proportional hazards. Analysts frequently test the validity of this assumption using statistical significance testing. However, the statistical power of such assessments is frequently unknown. We used Monte Carlo simulations to estimate the statistical power of two different methods for detecting violations of this assumption. When the covariate was binary, we found that a model-based method had greater power than a method based on cumulative sums of martingale residuals. Furthermore, the parametric nature of the distribution of event times had an impact on power when the covariate was binary. Statistical power to detect a strong violation of the proportional hazards assumption was low to moderate even when the number of observed events was high. In many data sets, power to detect a violation of this assumption is likely to be low to modest.

  19. Proportional gas counter for photoemission measurement in conditions of X-radiation diffraction

    International Nuclear Information System (INIS)

    Koval'chuk, M.V.; Yakimov, S.S.; Imamov, R.M.; Faleev, N.N.; Shilin, Yu.N.; Serbinov, K.V.; Goncharov, V.Ya.

    1981-01-01

    A structure and principle of operation of a proportional gas counter being an attachment for an x-ray diffractometer are described. The proportional counter is intended for non-vacuumized neasurement of photoelectron yield curves under the conditions of x-ray diffraction. The cylindrical proportional counter is filled with a gas, mixture of 90%He+10%CH 4 . The efficiency of detecting the electrons with energy less than 5 keV is near 100%. The crystal under investigation is placed on the counter bottom the position of which can be changed in the horibzontal plane. A tungsten filament eing a central electrode is stretched in the counter cap. The cap has lavsan windows located in such a way that the diffraction both in the Bragg and Laue geometries is provided. Si monocrystall in the position of (111) is used as a monochromator. The counter described is applied successfully-for investigating the structure of monocrystal surface layers

  20. Eigensolutions of non-proportionally damped systems based on continuous damping sensitivity

    Science.gov (United States)

    Lázaro, Mario

    2016-02-01

    The viscous damping model has been widely used to represent dissipative forces in structures under mechanical vibrations. In multiple degree of freedom systems, such behavior is mathematically modeled by a damping matrix, which in general presents non-proportionality, that is, it does not become diagonal in the modal space of the undamped problem. Eigensolutions of non-proportional systems are usually estimated assuming that the modal damping matrix is diagonally dominant (neglecting the off-diagonal terms) or, in the general case, using the state-space approach. In this paper, a new closed-form expression for the complex eigenvalues of non-proportionally damped system is proposed. The approach is derived assuming small damping and involves not only the diagonal terms of the modal damping matrix, but also the off-diagonal terms, which appear under higher order. The validity of the proposed approach is illustrated through a numerical example.

  1. Coaptation Triangle and Golden Proportion in mitral valve anatomy. Does nature play with geometry?

    Science.gov (United States)

    Deorsola, Luca; Bellone, Alessandra

    2018-01-01

    The Coaptation Triangle, or Tenting Area, can be identified on long-axis 2D images. Its assessment is a routine practice during echocardiographic mitral evaluation. The Golden Proportion is a particular geometric ratio between two segments. Its value is an irrational number, commonly rounded to 0.618 and showing unique geometrical/mathematical properties. Interestingly, its presence has been documented in an extremely variable number of natural settings. Hypothesizing the presence of the Golden Proportion in normal mitral anatomy, we examined the Coaptation Triangle of healthy valves to investigate such a theory. A total of 41 healthy adults, with normal mitral valves, underwent 2D echocardiography. Adequate images were chosen and loaded into custom software. Firstly, the Coaptation Triangle was manually drawn by the operator. Then, a second Coaptation Triangle, with the same base, but based on Golden Proportion, was automatically built by the software. Eventually, the two triangles were analyzed and compared. All retrieved measurements were investigated for differences and correlations. Ratios close to the Golden Proportion were found in several locations of the manually drawn Coaptation Triangle. On the other hand, comparing the manually drawn Coaptation Triangle with the automatically built one, no significant differences were revealed, and very strong correlations were demonstrated. The Golden Proportion appears present in the geometry of normal mitral valves. Studying such an aspect and identifying disruption in anatomical proportions could improve early diagnosis of mitral alterations, and allows a more standardized follow-up and help surgeons to plan a repair strategy, particularly quantifying the needed surgical modifications. © 2017 Wiley Periodicals, Inc.

  2. Discontinuous gradient centrifugation (DGC) decreases the proportion of chromosomally unbalanced spermatozoa in chromosomal rearrangement carriers.

    Science.gov (United States)

    Rouen, Alexandre; Balet, Richard; Dorna, Maud; Hyon, Capucine; Pollet-Villard, Xavier; Chantot-Bastaraud, Sandra; Joyé, Nicole; Portnoï, Marie-France; Cassuto, Nino Guy; Siffroi, Jean-Pierre

    2013-07-01

    Can the proportion of unbalanced spermatozoa in chromosomal rearrangement carriers be decreased through the use of discontinuous gradient centrifugation (DGC)? DGC significantly decreases the proportion of genetically unbalanced spermatozoa in chromosomal rearrangement carriers. Chromosomal rearrangement carriers present with a certain proportion of unbalanced gametes, which can lead to miscarriages or malformations in the offspring. There is presently no known way to select the balanced spermatozoa and use them for IVF. The proportion of unbalanced spermatozoa after DGC was compared with that before DGC in 21 patients with a chromosomal rearrangement. At least 500 spermatozoa were analysed per observation. Twenty-one male patients with a chromosomal rearrangement were included in this prospective study. They initially consulted for infertility, recurrent miscarriages or a history of abnormal pregnancy. The samples were split into two, with one part undergoing DGC and the other being immediately fixed. Fluorescence in situ hybridization was performed to establish the chromosome segregation pattern of each spermatozoon. DGC significantly decreased the proportion of unbalanced spermatozoa in all but 1 of the 21 chromosomal rearrangement carriers (P < 0.05). Although DGC reduces the proportion of unbalanced spermatozoa in ejaculates from patients with chromosome rearrangements this elimination is only partial and some abnormal spermatozoa remain. Means to exclude these spermatozoa to ensure that only balanced ones are used in IVF remain to be discovered. The motility and morphology of the sperm before and after DGC were not measured. Used in IVF or intrauterine insemination, DGC could decrease the chance that a man carrying a chromosomal rearrangement will father an abnormal fetus.

  3. Robust fractional-order proportional-integral observer for synchronization of chaotic fractional-order systems

    KAUST Repository

    N U+02BC Doye, Ibrahima

    2018-02-13

    In this paper, we propose a robust fractional-order proportional-integral U+0028 FOPI U+0029 observer for the synchronization of nonlinear fractional-order chaotic systems. The convergence of the observer is proved, and sufficient conditions are derived in terms of linear matrix inequalities U+0028 LMIs U+0029 approach by using an indirect Lyapunov method. The proposed U+0028 FOPI U+0029 observer is robust against Lipschitz additive nonlinear uncertainty. It is also compared to the fractional-order proportional U+0028 FOP U+0029 observer and its performance is illustrated through simulations done on the fractional-order chaotic Lorenz system.

  4. Determinants involved in regulating the proportion of edited apolipoprotein B RNAs.

    OpenAIRE

    Sowden, M; Hamm, J K; Spinelli, S; Smith, H C

    1996-01-01

    Editing the apolipoprotein B (apoB) RNA involves deamination of cytidine by the catalytic subunit, APOBEC-1, as a component of an editosome. A tripartite sequence (editing motif) is essential for editosome assembly and site-specific editing. Current theory for the regulation of apoB RNA editing proposes that APOBEC-1 is rate limiting in cells and determines the proportion of edited apoB mRNAs. An evaluation of how the overexpression of APOBEC-1 increased the proportion of edited RNAs has led ...

  5. Canons of Proportion and the Laws of Nature: Observations on a Permanent and Unresolved Conflict

    Directory of Open Access Journals (Sweden)

    Mario Curti

    2014-06-01

    Full Text Available The mind of the artist always seems to oscillate between two poles: on one side, reality as represented by nature in all its aspects, and on the other, the dream of absolute perfection. This is the fundamental problem of the eternal conflict between the laws of nature and the canon of aesthetic proportions, which presents itself in different, though often related, guises. This article identifies, through explorations of thinkers from Vitruvius, to Galileo, to Le Corbusier, the problematic knots of a phenomenon that the champions of ideal proportions have always had to face and often to hide, even from themselves, when confronted with the evidence of facts.

  6. Proportional-integral control of propagating wave segments in excitable media

    Science.gov (United States)

    Katsumata, Hisatoshi; Konishi, Keiji; Hara, Naoyuki

    2017-04-01

    Numerical simulations are performed to demonstrate that proportional-integral control, one of the most commonly used feedback schemes in control engineering, can stabilize propagating wave segments in excitable media to a desired size. The proportional-integral controller measures the size of a wave segment and applies a spatially uniform signal to the medium. This controller has the following features: difficult trial-and-error adjustment is not necessary, wave segments can be stabilized to different sizes without readjusting the controller, and the wave segment size can be maintained even in media having position-dependent parameters.

  7. Proportion of medication error reporting and associated factors among nurses: a cross sectional study.

    Science.gov (United States)

    Jember, Abebaw; Hailu, Mignote; Messele, Anteneh; Demeke, Tesfaye; Hassen, Mohammed

    2018-01-01

    A medication error (ME) is any preventable event that may cause or lead to inappropriate medication use or patient harm. Voluntary reporting has a principal role in appreciating the extent and impact of medication errors. Thus, exploration of the proportion of medication error reporting and associated factors among nurses is important to inform service providers and program implementers so as to improve the quality of the healthcare services. Institution based quantitative cross-sectional study was conducted among 397 nurses from March 6 to May 10, 2015. Stratified sampling followed by simple random sampling technique was used to select the study participants. The data were collected using structured self-administered questionnaire which was adopted from studies conducted in Australia and Jordan. A pilot study was carried out to validate the questionnaire before data collection for this study. Bivariate and multivariate logistic regression models were fitted to identify factors associated with the proportion of medication error reporting among nurses. An adjusted odds ratio with 95% confidence interval was computed to determine the level of significance. The proportion of medication error reporting among nurses was found to be 57.4%. Regression analysis showed that sex, marital status, having made a medication error and medication error experience were significantly associated with medication error reporting. The proportion of medication error reporting among nurses in this study was found to be higher than other studies.

  8. Women and wages worldwide : How the national proportion of working women brings underpayment into the organization

    NARCIS (Netherlands)

    Van de Vliert, E.; van der Vegt, G.S.

    Many employees are underpaid relative to their country's level of wealth. In agreement with social identity theory principles extended to the national level, our 59-nation study uncovered that this form of wealth-referenced underpayment is associated with the proportion of working women. In

  9. Principles of proportional recovery after stroke generalize to neglect and aphasia.

    Science.gov (United States)

    Marchi, N A; Ptak, R; Di Pietro, M; Schnider, A; Guggisberg, A G

    2017-08-01

    Motor recovery after stroke can be characterized into two different patterns. A majority of patients recover about 70% of initial impairment, whereas some patients with severe initial deficits show little or no improvement. Here, we investigated whether recovery from visuospatial neglect and aphasia is also separated into two different groups and whether similar proportions of recovery can be expected for the two cognitive functions. We assessed 35 patients with neglect and 14 patients with aphasia at 3 weeks and 3 months after stroke using standardized tests. Recovery patterns were classified with hierarchical clustering and the proportion of recovery was estimated from initial impairment using a linear regression analysis. Patients were reliably clustered into two different groups. For patients in the first cluster (n = 40), recovery followed a linear model where improvement was proportional to initial impairment and achieved 71% of maximal possible recovery for both cognitive deficits. Patients in the second cluster (n = 9) exhibited poor recovery (aphasia after stroke shows the same dichotomy and proportionality as observed in motor recovery. This is suggestive of common underlying principles of plasticity, which apply to motor and cognitive functions. © 2017 EAN.

  10. Large-proportional shrunken bio-replication of shark skin based on UV-curing shrinkage

    Science.gov (United States)

    Chen, Huawei; Che, Da; Zhang, Xin; Yue, Yue; Zhang, Deyuan

    2015-01-01

    The shark skin effect has attracted worldwide attention because of its superior drag reduction. As the product of natural selection, the maximum drag reduction of shark skin is found in its normal living environment. Large-proportional shrinkage of shark skin morphology is greatly anticipated for its adaptation to faster fluid flow. One novel approach, large-proportional shrunken bio-replication, is proposed as a method to adjust the optimal drag reduction region of shark skin based on the shrinkage of UV-cured material. The shark skin is taken as a replica template to allow large-proportional shrinking in the drag reduction morphology by taking advantage of the shrinkage of UV-curable material. The accuracy of the large-proportional shrunken bio-replication approach is verified by a comparison between original and shrunken bio-replicated shark skin, which shows that the shrinking ratio can reach 23% and the bio-replication accuracy is higher than 95%. In addition, the translation of the optimum drag reduction peak of natural surface function to various applications and environments is proved by drag reduction experiments.

  11. Large-proportional shrunken bio-replication of shark skin based on UV-curing shrinkage

    International Nuclear Information System (INIS)

    Chen, Huawei; Che, Da; Zhang, Xin; Yue, Yue; Zhang, Deyuan

    2015-01-01

    The shark skin effect has attracted worldwide attention because of its superior drag reduction. As the product of natural selection, the maximum drag reduction of shark skin is found in its normal living environment. Large-proportional shrinkage of shark skin morphology is greatly anticipated for its adaptation to faster fluid flow. One novel approach, large-proportional shrunken bio-replication, is proposed as a method to adjust the optimal drag reduction region of shark skin based on the shrinkage of UV-cured material. The shark skin is taken as a replica template to allow large-proportional shrinking in the drag reduction morphology by taking advantage of the shrinkage of UV-curable material. The accuracy of the large-proportional shrunken bio-replication approach is verified by a comparison between original and shrunken bio-replicated shark skin, which shows that the shrinking ratio can reach 23% and the bio-replication accuracy is higher than 95%. In addition, the translation of the optimum drag reduction peak of natural surface function to various applications and environments is proved by drag reduction experiments. (technical note)

  12. Measures to assess the prognostic ability of the stratified Cox proportional hazards model

    DEFF Research Database (Denmark)

    (Tybjaerg-Hansen, A.) The Fibrinogen Studies Collaboration.The Copenhagen City Heart Study; Tybjærg-Hansen, Anne

    2009-01-01

    Many measures have been proposed to summarize the prognostic ability of the Cox proportional hazards (CPH) survival model, although none is universally accepted for general use. By contrast, little work has been done to summarize the prognostic ability of the stratified CPH model; such measures...

  13. Proportional Transaction Costs in the Robust Control Approach to Option Pricing: The Uniqueness Theorem

    Energy Technology Data Exchange (ETDEWEB)

    El Farouq, Naïma, E-mail: naima.elfarouq@univ-bpclermont.fr [Université Blaise Pascal (Clermont-Ferrand II) (France); Bernhard, Pierre, E-mail: pierre.bernhard@inria.fr [INRIA Sophia Antipolis-Méditerranée (France)

    2015-10-15

    We prove the missing uniqueness theorem for the viscosity solution of a quasi-variational inequality related to a minimax impulse control problem modeling the option pricing with proportional transactions costs. This result makes our robust control approach of option pricing in the interval market model essentially complete.

  14. Effects of Seed Proportion and Planting Pattern on Dry Matter Yield ...

    African Journals Online (AJOL)

    Panicum coloratum (PC) and Stylosanthes guianensis (SG) mixed pasture was established to assess the effect of seed proportion and planting pattern on Dry Matter Yield (DMY), compatibility and nutrient content of the mixed stand. Seeds of PC and SG were mixed as 50%PC+50% SG and 25% PC+75% SG and sown in ...

  15. proportional counting chamber for large-area-coated β sources

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 86; Issue 6. 2 π proportional counting chamber for large-area-coated β sources ... A provision is made for change ofthe source and immediate measurement of source activity. These sources are used to calibrate the efficiency of contamination monitors at radiological ...

  16. Maxillary anterior tooth dimensions and proportions in an Irish young adult population.

    LENUS (Irish Health Repository)

    Condon, M

    2011-07-01

    This study was undertaken in a young Irish population to determine the dimensions and ratios of the six maxillary anterior teeth. One hundred and nine Irish subjects (age 18-25 inclusive) had irreversible hydrocolloid impressions made of their maxillary dentition poured in type V stone. Clinical crown dimensions were measured with a digital calliper. The stone casts were digitally photographed in a standardised manner enabling calculation of various ratios between the maxillary anterior teeth. Sexual dimorphism existed for various tooth dimensions; most notably canine teeth were in the region of 0·8 mm longer and 0·6 mm wider in males. Central and lateral incisors were found to be 0·5 mm wider in males. It is, therefore, recommended that dimensional tooth guidelines should be given for each of the sexes and not on a population basis. With regard to tooth proportion ratios, no significant differences were found between genders or the left and right sides for any of the measurements or ratios measured. The digitally recorded tooth proportions were similar for both sexes, and the Golden Proportion guidelines could only be applied to the lateral incisor\\/central incisor widths (0·618). Identified width proportions for the canine\\/central incisor were 0·58 and for canine\\/lateral incisor 0·89.

  17. Effects of temperature on hatching time and hatchling proportions in a poecilogonous population of Haminoea zelandiae.

    Science.gov (United States)

    Clemens-Seely, Katie; Phillips, Nicole E

    2011-10-01

    Poecilogony is a relatively uncommon life-history strategy that results in the production of two different larval forms from the same egg mass (e.g., free-swimming lecithotrophic larvae and post-metamorphic, crawling juveniles). In this study, a population of the opisthobranch gastropod Haminoea zelandiae from Pauatahanui Inlet, New Zealand, was found to exhibit poecilogony. Further, differences in development, hatching times and proportion of hatchlings that were veligers or juveniles were examined for egg masses in two temperature regimes in the laboratory: cool (15-17 °C), and warm (21-23 °C). Hatching proportions were also examined for egg masses collected from the field (where temperatures ranged from 21-23 °C) for varying lengths of time (1 d, 5 d, and 10 d post-spawning). Hatchlings from egg masses in warmer temperatures developed faster and hatched earlier than those in cool temperatures. In the laboratory, egg masses in warm conditions hatched a greater proportion of post-metamorphic juveniles (45.4%) compared to egg masses in cool conditions (24.6%) Further, egg masses that had been in the field 10 d before hatching (i.e., more days at warmer temperatures) exhibited a greater proportion of post-metamorphic juveniles (67.9%) than those that were collected after only 1 d in the field (25.1%). Together these results suggest that temperature may have an important role in mediating dispersal strategies in this poecilogonous species.

  18. Implementation of an anisotropic damage material model for non-proportional loading

    NARCIS (Netherlands)

    Niazi, Muhammad Sohail; Wisselink, H.H.; Meinders, Vincent T.; Huetink, Han; Onate, E; Owen, D.R.J

    2009-01-01

    Anisotropic damage for non-proportional loading is incorporated in an implicit finite element code under the framework of continuum damage models, using two different methodologies. Simple simulations are carried out to check the performance of the models. The advantages and drawbacks of both

  19. The paradox of proportional representation: The effect of party systems and coalitions on individuals' electoral participation

    NARCIS (Netherlands)

    Brockington, David

    2004-01-01

    Empirical findings based on aggregate data have found that proportional representation (PR) has a mixed relationship with electoral participation. Large party systems, thought to be one of the benefits of PR in increasing turnout, instead depress turnout. This article examines two theories that seek

  20. Austrian height and body proportion references for children aged 4 to under 19 years.

    Science.gov (United States)

    Gleiss, Andreas; Lassi, Michael; Blümel, Peter; Borkenstein, Martin; Kapelari, Klaus; Mayer, Michael; Schemper, Michael; Häusler, Gabriele

    2013-07-01

    Previous studies have demonstrated differences between national and the WHO reference curves in children older than 5 years. Moreover, reference curves for body proportions (sitting height, subischial leg length and their ratio) based on state-of-the-art statistics are not available. To develop reference curves for height and body proportions for use in Austria and compare the curves with WHO reference curves. To estimate and statistically investigate extreme percentiles. A sample of ∼14 500 children between 4-19 years of age was drawn via schooling institutions, stratified by provinces according to age- and sex-specific population proportions. GAMLSS models were used for a flexible estimation of percentile curves. After the age of 5 years national reference curves are more suitable than the WHO reference curves for clinical use in Austria. These height curves are very similar to the German reference curves published recently. Therefore, these reference curves for criteria of body proportions are recommended for use in other populations. Further validation studies are needed to establish whether the recently recommended -2.5 and -3.0 SD for height are a sensitive and specific cut-off in the diagnostic work-up for children with a suspected growth disorder using this new Austrian height chart.

  1. Determination of ancestral proportions in synthetic bovine breeds using commonly employed microsatellite markers.

    Science.gov (United States)

    Bicalho, H M S; Pimenta, C G; Mendes, I K P; Pena, H B; Queiroz, E M; Pena, S D J

    2006-07-31

    The International Society of Animal Genetics (ISAG) has chosen nine microsatellites (international marker set) as a standard that should be included in all cattle parentage studies. They are BM1824, BM2113, INRA023, SPS115, TGLA122, TGLA126, TGLA227, ETH10, and ETH225. We decided to ascertain whether this microsatellite set could be used to determine ancestral proportions in individual animals of synthetic breeds produced by crossing zebu and taurine cattle. Since the genotypes of these markers are routinely available, this would constitute a practical and cost-free method to estimate the ancestry of synthetic breed animals. Genotypes of 100 Gir and 100 Holstein animals were examined for this ISAG marker set. As expected, there were very significant allele frequency differences between the two breeds at most loci. We also typed 20 Girolando animals for which there was complete genealogical information. "Structure" software easily distinguished Holstein and Gir animals based on their microsatellite genotypes; it also attributed the genomic proportion of zebu and taurine of each of the 20 Girolando animals. The proportion of Holstein ancestry was then regressed on the genealogical data; there was a highly significant correlation (r = 0.84, P Girolando animals within narrow confidence limits. This microsatellite set might also be useful for estimating the proportions of taurine and zebu origins in commercial meat products.

  2. Proportional Odds Logistic Regression - Effective Means of Dealing with Limited Uncertainty in Dichotomizing Clinical Outcomes

    Czech Academy of Sciences Publication Activity Database

    Valenta, Zdeněk; Pitha, J.; Poledne, R.

    2006-01-01

    Roč. 25, č. 24 (2006), s. 4227-4234 ISSN 0277-6715 R&D Projects: GA MZd NA7512 Institutional research plan: CEZ:AV0Z10300504 Keywords : proportional odds logistic regression * dichotomized outcomes * uncertainty Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 1.737, year: 2006

  3. Proportional positive airway pressure: a new concept to treat obstructive sleep apnoea.

    Science.gov (United States)

    Juhász, J; Becker, H; Cassel, W; Rostig, S; Peter, J H

    2001-03-01

    Proportional positive airway pressure (PPAP) was designed to optimize airway pressure for the therapy of obstructive sleep apnoea (OSA). In a randomized crossover prospective study, the clinical feasibility of PPAP and its immediate effects on the breathing disorder and sleep in comparison with continuous positive airway pressure (CPAP) was evaluated. Twelve patients requiring CPAP therapy underwent CPAP and PPAP titration in a random order. Obstructive and mixed respiratory events could be completely abolished with both forms of treatment. This efficacy could be achieved at a significantly lower mean mask pressure during PPAP titration (8.45+/-2.42 cmH2O) compared to CPAP (9.96+/-2.7 cmH2O) (p=0.002). The mean minimal arterial oxygen saturation (Sa,O2) (82.8+/-6.5%) on the diagnostic night increased significantly (pPPAP titration. Total sleep time, slow wave sleep and rapid eye movement (REM) sleep increased significantly by the same amount during both CPAP and PPAP titration (pPPAP titration night, four patients did not have a preference, and two patients preferred CPAP. The present data show that proportional positive airway pressure is as effective as continuous positive airway pressure in eliminating obstructive events and has the same immediate effect on sleep. The lower average mask pressure during proportional positive airway pressure implies potential advantages compared to continuous positive airway pressure. Proportional positive airway pressure presents a new effective therapeutic approach to obstructive sleep apnoea.

  4. Inverse sampled Bernoulli (ISB) procedure for estimating a population proportion, with nuclear material applications

    International Nuclear Information System (INIS)

    Wright, T.

    1982-01-01

    A new sampling procedure is introduced for estimating a population proportion. The procedure combines the ideas of inverse binomial sampling and Bernoulli sampling. An unbiased estimator is given with its variance. The procedure can be viewed as a generalization of inverse binomial sampling

  5. Miniature proportional control valve with top-mounted piezo bimorph actuator with millisecond response time

    NARCIS (Netherlands)

    Groen, Maarten; Brouwer, Dannis Michel; Lötters, Joost Conrad; Wiegerink, Remco J.

    2015-01-01

    In this paper we demonstrate the realization of a micro control valve with a top-mounted piezoelectric bimorph actuator, to obtain a high-bandwidth proportional control valve for gases in the range of several grams per hour. Dynamic fluidic and mechanical characterization shows that the valve is

  6. Proportionality and the limitation clauses of the South African Bill of ...

    African Journals Online (AJOL)

    Despite opposition from certain academics, proportionality is a prominent feature of the application of the limitation clauses in the South African Constitution. The elements of ... South Africa's participation in the global recognition and application of this way of dealing with the limitation of rights is worthwhile. KEYWORDS: ...

  7. Decision-Tree Models of Categorization Response Times, Choice Proportions, and Typicality Judgments

    Science.gov (United States)

    Lafond, Daniel; Lacouture, Yves; Cohen, Andrew L.

    2009-01-01

    The authors present 3 decision-tree models of categorization adapted from T. Trabasso, H. Rollins, and E. Shaughnessy (1971) and use them to provide a quantitative account of categorization response times, choice proportions, and typicality judgments at the individual-participant level. In Experiment 1, the decision-tree models were fit to…

  8. Proportional Derivative Control with Inverse Dead-Zone for Pendulum Systems

    OpenAIRE

    Rubio, José de Jesús; Zamudio, Zizilia; Pacheco, Jaime; Mújica Vargas, Dante

    2013-01-01

    A proportional derivative controller with inverse dead-zone is proposed for the control of pendulum systems. The proposed method has the characteristic that the inverse dead-zone is cancelled with the pendulum dead-zone. Asymptotic stability of the proposed technique is guaranteed by the Lyapunov analysis. Simulations of two pendulum systems show the effectiveness of the proposed technique.

  9. Eighth Grade In-Service Teachers' Knowledge of Proportional Reasoning and Functions: A Secondary Data Analysis

    Science.gov (United States)

    Masters, Jessica

    2012-01-01

    A secondary data analysis was conducted using a large dataset from a study related to online professional development for eighth grade teachers of mathematics. Using this data, the paper provides a snapshot of the current state of teachers' knowledge related to proportional reasoning and functions. The paper also considers how teachers' knowledge…

  10. Connections Between Qualitative and Quantitative Thinking About Proportion: The Case of Paulina

    Science.gov (United States)

    Ruiz Ledesma, Elena Fabiola; Valdemoros Alvarez, Marta Elena

    2004-01-01

    The case study presented in this report was part of assessing a teaching proposal on ratio and proportion. A group of sixth-grade students of elementary education in Mexico participated in the implementation of the proposal. The girl of the case study was representative of those students in the group who had a lot of recourse to handling…

  11. Enabling Eco-Friendly Choices by Relying on the Proportional-Thinking Heuristic

    Directory of Open Access Journals (Sweden)

    Cleotilde Gonzalez

    2013-01-01

    Full Text Available Ecological (eco taxes are promising mechanisms to enable eco-friendly decisions, but few people prefer them. In this study, we present a way in which eco-tax options may be communicated to general public to encourage their payment. Our implementation (called “information presentation” takes advantage of the non-linear relationship between eco-tax payments and CO2 emissions and the human reliance on the proportional-thinking heuristic. According to the proportional-thinking heuristic, people are likely to prefer a small eco-tax increase and judge larger eco-tax increases to cause proportionally greater CO2 emissions reductions. In an online study, participants were asked to choose between eco-tax increases in two problems: In one, a smaller eco-tax increase resulted in greater CO2 emissions reduction, while in the other, a smaller tax increase resulted in lesser CO2 emissions reduction. Although the larger eco-tax increase did not reduce CO2 emissions the most, across both problems, people judged larger eco-tax increases to cause proportionally greater reductions in CO2 emissions and preferred smaller tax increases. Thus, eco-tax policies would benefit by presenting information in terms of eco-tax increases, such that smaller eco-tax increases (which are more attractive and are likely to be chosen by people cause greater CO2 emissions reductions.

  12. Small area estimation of proportions with different levels of auxiliary data.

    Science.gov (United States)

    Chandra, Hukum; Kumar, Sushil; Aditya, Kaustav

    2018-03-01

    Binary data are often of interest in many small areas of applications. The use of standard small area estimation methods based on linear mixed models becomes problematic for such data. An empirical plug-in predictor (EPP) under a unit-level generalized linear mixed model with logit link function is often used for the estimation of a small area proportion. However, this EPP requires the availability of unit-level population information for auxiliary data that may not be always accessible. As a consequence, in many practical situations, this EPP approach cannot be applied. Based on the level of auxiliary information available, different small area predictors for estimation of proportions are proposed. Analytic and bootstrap approaches to estimating the mean squared error of the proposed small area predictors are also developed. Monte Carlo simulations based on both simulated and real data show that the proposed small area predictors work well for generating the small area estimates of proportions and represent a practical alternative to the above approach. The developed predictor is applied to generate estimates of the proportions of indebted farm households at district-level using debt investment survey data from India. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Imaging with a multiplane multiwire proportional chamber using heavy ion beams

    International Nuclear Information System (INIS)

    Chu, W.T.; Alonso, J.R.; Tobias, C.A.

    1982-01-01

    A 16-plane multiwire proportional chamber has been developed to accurately map intensity profiles of heavy ion beams at the Bevalac. The imaging capability of the system has been tested for reconstruction of 3-dimensional representation of a canine thorax region using heavy ion beams

  14. proportional counting chamber for large-area-coated β sources

    Indian Academy of Sciences (India)

    tional regulations [1] (ISO 1988), calibration of contamination monitor needs a minimum active source area of 100 cm2. Standard laboratories worldwide use gas flow-type large proportional counters to determine absolute surface emission rates from the large-area- coated α-β sources [2–6]. Extended source is introduced ...

  15. Neocortical calretinin neurons in primates: increase in proportion and microcircuitry structure

    Directory of Open Access Journals (Sweden)

    Domagoj eDžaja

    2014-09-01

    Full Text Available In this mini review we first point at the expansion of associative cortical areas in primates as well as at the intrinsic changes in the structure of the cortical column. There is a huge increase in proportion of glutamatergic cortical projecting neurons located in the upper cortical layers (II/III. In addition, inside this group a novel class of associative neurons becomes recognized that is important for both, inter-areal and intra-areal columnar integration. By overviewing the literature data we found that there might be also a 50% increase in proportion of neocortical GABAergic neurons between primates and rodents, principally reflecting a 4 to 5 fold increase in proportion of calretinin interneurons. In primates calretinin interneurons might represent 15% of the total neuron number in the upper layers of high order associative areas. Evaluating data about functional properties of their connectivity we hypothesize that an exponential increase in proportion of calretinin interneurons might lead to supra-linear growth in memory capacity of the associative neocortical network. An open question is do we have some new calretinin interneuron subtypes which might substantially change micro-circuitry structure of the primate cerebral cortex.

  16. Behavioral implications of ontogenetic changes in intrinsic hand and foot proportions in olive baboons (Papio Anubis).

    Science.gov (United States)

    Druelle, François; Young, Jesse; Berillon, Gilles

    2018-01-01

    Relatively long digits are considered to enhance grasping performance in primates. We tested whether growth-related changes in intrinsic hand and foot proportions may have behavioral implications for growing animals, by examining whether ontogenetic changes in digital proportions are related to variation in voluntary grasping behaviors in baboons. Longitudinal morphological and behavioral data were collected on 6 captive olive baboons (Papio anubis) as they aged from 5 to 22 months. The length of digits and metapodials, measured from radiographs, were used to calculate phalangeal indices (i.e., PIs: summed length of non-distal phalanges relative to corresponding metapodial length). We also examined the allometric scaling of digital bones relative to body mass. We observed baboon positional behaviors over a 15-day period following the radiographic sessions, quantifying the frequency of forelimb and hindlimb grasping behaviors. PIs for all digits declined during growth, a result of the differential scaling of metapodials (which scaled to body mass with isometry) versus phalanges (which scaled with negative allometry). The incidence of forelimb and hindlimb grasping behaviors declined with age. Though we found no relationship between forelimb grasping and hand proportions, the incidence of hindlimb grasping was directly correlated with postaxial digit PIs. Only changes in the intrinsic proportions of the pedal digits are associated with variation in grasping activity in growing baboons. This finding accords previous biomechanical and neuroanatomical studies showing distinct functional roles for the hands and feet during primate locomotion, and has important implications for reconstructing primate locomotor evolution. © 2017 Wiley Periodicals, Inc.

  17. An Ultra-High Pressure Proportional Counter for Hard X-Ray Astronomy.

    Science.gov (United States)

    Ye, Zongnan

    1992-01-01

    This thesis describes the successful development of ultra-high pressure proportional counters for balloon -borne hard X-ray astronomy. The proportional counters were filled with argon/xenon at pressures up to {~}30atm. The properties of proportional counters filled at such pressures have been studied by the author in the laboratory. The spatial response of these counters to X-rays and charged particles, and the energy response to X-rays up to 1MeV have been analysed. Gas gain measurements using the charge collection technique and analysis of the subsequent data show that simple extrapolation from low pressures cannot explain the observed behaviour (e.g. the mobility of positive ions and quenching efficiency) of these counters at high pressures. A hard X-ray telescope consisting of 32 such proportional counters filled at ultra-high pressures is being constructed, details of which are described. The sensitivity of this telescope for both continuum and narrow-line spectra is superb compared to contemporary balloon-and satellite-borne hard X-ray detectors. Together with an imaging phoswich Anger camera, it is scheduled for launch from Alice Springs in November 1992. An anticoincidence system for an X-ray detector, consisting of a combined passive and active shield, has been designed and constructed by the author, and flown on a balloon. The active shield, made of a plastic scintillator, has resulted in an additional reduction of 25% in the background registered at balloon altitudes.

  18. A simple GMM estimator for the semi-parametric mixed proportional hazard model

    NARCIS (Netherlands)

    Bijwaard, G.E.; Ridder, G.; Woutersen, T.

    2013-01-01

    Ridder and Woutersen (Ridder, G., and T. Woutersen. 2003. “The Singularity of the Efficiency Bound of the Mixed Proportional Hazard Model.” Econometrica 71: 1579–1589) have shown that under a weak condition on the baseline hazard, there exist root-N consistent estimators of the parameters in a

  19. Proportionally more deleterious genetic variation in European than in African populations

    DEFF Research Database (Denmark)

    Lohmueller, Kirk E; Indap, Amit R; Schmidt, Steffen

    2008-01-01

    individuals, in contrast, have significantly more genotypes homozygous for the derived allele at synonymous and non-synonymous SNPs and for the damaging allele at 'probably damaging' SNPs than AAs do. For SNPs segregating only in one population or the other, the proportion of non-synonymous SNPs...

  20. Zero Information in the Two-Sample Mixed Proportional Hazards Model

    NARCIS (Netherlands)

    Klaassen, Chris A.J.; Lenstra, Andries J.

    2000-01-01

    The mixed proportional hazards model generalizes the Cox model by incorporating a random effect. In the case of two samples, it is chiefly determined by a triple consisting of a number representing the treatment effect, the integrated base-line hazard, and the distribution of the unobserved random

  1. Beyond beauty : reexamining architectural proportion in the Basilicas of San Lorenzo and Santo Spirito in Florence

    NARCIS (Netherlands)

    Cohen, Matthew A.

    2011-01-01

    This dissertation reexamines the problem of architectural proportion in the basilica of San Lorenzo in Florence following a rigorous new methodology that combines comprehensive measurements and other observations with documentary evidence, in order to identify the intentions of the basilica’s

  2. Requirements for efficient cell-type proportioning: regulatory timescales, stochasticity and lateral inhibition

    Science.gov (United States)

    Pfeuty, B.; Kaneko, K.

    2016-04-01

    The proper functioning of multicellular organisms requires the robust establishment of precise proportions between distinct cell types. This developmental differentiation process typically involves intracellular regulatory and stochastic mechanisms to generate cell-fate diversity as well as intercellular signaling mechanisms to coordinate cell-fate decisions at tissue level. We thus surmise that key insights about the developmental regulation of cell-type proportion can be captured by the modeling study of clustering dynamics in population of inhibitory-coupled noisy bistable systems. This general class of dynamical system is shown to exhibit a very stable two-cluster state, but also metastability, collective oscillations or noise-induced state hopping, which can prevent from timely and reliably reaching a robust and well-proportioned clustered state. To circumvent these obstacles or to avoid fine-tuning, we highlight a general strategy based on dual-time positive feedback loops, such as mediated through transcriptional versus epigenetic mechanisms, which improves proportion regulation by coordinating early and flexible lineage priming with late and firm commitment. This result sheds new light on the respective and cooperative roles of multiple regulatory feedback, stochasticity and lateral inhibition in developmental dynamics.

  3. Phylogenetic tree reconstruction accuracy and model fit when proportions of variable sites change across the tree.

    Science.gov (United States)

    Shavit Grievink, Liat; Penny, David; Hendy, Michael D; Holland, Barbara R

    2010-05-01

    Commonly used phylogenetic models assume a homogeneous process through time in all parts of the tree. However, it is known that these models can be too simplistic as they do not account for nonhomogeneous lineage-specific properties. In particular, it is now widely recognized that as constraints on sequences evolve, the proportion and positions of variable sites can vary between lineages causing heterotachy. The extent to which this model misspecification affects tree reconstruction is still unknown. Here, we evaluate the effect of changes in the proportions and positions of variable sites on model fit and tree estimation. We consider 5 current models of nucleotide sequence evolution in a Bayesian Markov chain Monte Carlo framework as well as maximum parsimony (MP). We show that for a tree with 4 lineages where 2 nonsister taxa undergo a change in the proportion of variable sites tree reconstruction under the best-fitting model, which is chosen using a relative test, often results in the wrong tree. In this case, we found that an absolute test of model fit is a better predictor of tree estimation accuracy. We also found further evidence that MP is not immune to heterotachy. In addition, we show that increased sampling of taxa that have undergone a change in proportion and positions of variable sites is critical for accurate tree reconstruction.

  4. Monthly fluctuation of termite caste proportions (Isoptera) within fire ant mounds (hymenoptera: formicidae)

    Science.gov (United States)

    Thomas G. Shelton; J.T. Vogt; Marla J. Tanley; Arthur G. Appel

    2003-01-01

    Monthly abundance and caste proportions of subterranean termites (Reticulitennes spp.) inhabiting red imported fire ant (Solenopsis invicta Buren) mounds were recorded during 1999 and 2000 from a relatively undisturbed forest edge in Tuskegee, Alabama. Temperature data were also recorded at these mounds; mean air, soil, and mound temperatures followed a sine model over...

  5. a study of the slope of cox proportional hazard and weibull models

    African Journals Online (AJOL)

    Adejumo & Ahmadu

    Keywords: Cox Proportional Hazard Model, Weibull Model,. Slope, Shape parameters, Scale parameter, Survival time. INTRODUCTION. Survival analysis studies the amount of time that it takes before a particular event, such as death, occurrence of a disease, marriage, divorce, occurs. However, the same techniques can ...

  6. The Relationship between the Proportional Size of the Special Education Population and Academic Achievement

    Science.gov (United States)

    Harper, Patricia Kenner

    2013-01-01

    This investigation addressed the hypothesized effects of the proportional size of a district's special education population on the overall student achievement in selected school districts in Texas. The size of a district's special education population (independent variable) was compared to districts' achievement (dependent variables) in order to…

  7. Proportional reasoning ability of school leavers aspiring to higher education in South Africa

    Directory of Open Access Journals (Sweden)

    Vera Frith

    2016-05-01

    Full Text Available The ability to reason about numbers in relative terms is essential for quantitative literacy, which is necessary for studying academic disciplines and for critical citizenship. However, the ability to reason with proportions is known to be difficult to learn and to take a long time to develop. To determine how well higher education applicants can reason with proportions, questions requiring proportional reasoning were included in one version of the National Benchmark Test as unscored items. This version of the National Benchmark Test was taken in June 2014 by 5 444 learners countrywide who were intending to apply to higher education institutions. The multiple choice questions varied in terms of the structure of the problem, the context in which they were situated and complexity of the numbers, but all involved only positive whole numbers. The percentage of candidates who answered any particular question correctly varied from 25% to 82%. Problem context and structure affected the performance, as expected. In addition, problems in which the answer was presented as a mathematical expression, or as a sentence in which the reasoning about the relative sizes of fractions was explained, were generally found to be the most difficult. The performance on those questions in which the answer was a number or a category (chosen as a result of reasoning about the relative sizes of fractions was better. These results indicate that in learning about ratio and proportion there should be a focus on reasoning in various contexts and not only on calculating answers algorithmically.

  8. Photometric study of divine proportion and its correlation with facial attractiveness

    Directory of Open Access Journals (Sweden)

    Ana Paula Lazzari Marques Peron

    2012-04-01

    Full Text Available OBJECTIVE: The aim of this study was to evaluate if there is correlation between perception of facial esthetic and divine proportion, verifying if most attractive faces are closer to and less attractive faces are more distant to this proportion. METHODS: Standard facial photographs (frontal and lateral in natural head position were taken of a sample of 85 Brazilian Caucasian women, with mean age of 23 years and 9 months. The photographs were evaluated by 5 orthodontists, 5 artists and 5 laymen and were classified, according to their subjective analysis of facial esthetic, in pleasant, acceptable and not pleasant. Frontal photographs were evaluated by divine proportion analysis using the computerized method. RESULTS AND CONCLUSIONS: According to subjective analysis the sample consisted 18.8% of pleasant, 70.6% of acceptable and 10.6% of not pleasant faces. After statistical analysis, a lack of agreement was verified in esthetic facial preferences among the three groups of observers. It was also possible to verify that in this research there was no correlation between perception of facial beauty and divine proportion.

  9. A damage cumulation method for crack initiation prediction under non proportional loading and overloading

    International Nuclear Information System (INIS)

    Taheri, S.

    1992-04-01

    For a sequence of constant amplitude cyclic loading containing overloads, we propose a method for damage cumulation in non proportional loading. This method uses as data cyclic stabilized states at non proportional loading and initiation or fatigue curve in uniaxial case. For that, we take into account the dependence of Cyclic Strain Stress Curves (C.S.S.C.) and mean cell size on prehardening and we define a stabilized uniaxial state cyclically equivalent to a non proportional stabilized state through a family of C.S.S.C. Although simple assumptions like linear damage function and linear cumulation is used we obtain a sequence effect for difficult cross slip materials as 316 stainless steel, but the Miner rule for easy cross-slip materials. We show then differences between a load-controlled test and a strain controlled test: for a 316 stainless steel in a load controlled test, the non proportional loading at each cycle is less damaging than the uniaxial one for the same equivalent stress, while the result is opposite in a strain controlled test. We show also that an overloading retards initiation in a load controlled test while it accelerates initiation in a strain controlled test. (author). 26 refs., 8 figs

  10. The role of surprising events in a math game on proportional reasoning

    NARCIS (Netherlands)

    Wouters, P.; van Oostendorp, H.; ter Vrugte, Judith; de Jong, Anthonius J.M.; Van der Cruysse, S.; Elen, J.

    2015-01-01

    This study examines whether surprising events can be used to stimulate students’ playful learning in a GBL environment in the domain of proportional reasoning. The assumed effect of surprise is that unexpected events interrupt an expectation and therefore triggers the player to evaluate the new

  11. Two Perspectives on Proportional Relationships: Extending Complementary Origins of Multiplication in Terms of Quantities

    Science.gov (United States)

    Beckmann, Sybilla; Izsák, Andrew

    2015-01-01

    In this article, we present a mathematical analysis that distinguishes two distinct quantitative perspectives on ratios and proportional relationships: variable number of fixed quantities and fixed numbers of variable parts. This parallels the distinction between measurement and partitive meanings for division and between two meanings for…

  12. A method for measuring the wire tensions in proportional and drift chambers

    International Nuclear Information System (INIS)

    Coupland, M.

    1983-01-01

    A device to measure the resonant frequency of a proportional chamber wire is described. From this frequency the wire tension can be calculated. The device is self-tuning, and in some instances may be used without opening the chamber. (orig.)

  13. Descartes on the Unification of Arithmetic, Algebra and Geometry Via the Theory of Proportions

    Czech Academy of Sciences Publication Activity Database

    Crippa, Davide

    2017-01-01

    Roč. 73, č. 3/4 (2017), s. 1239-1258 ISSN 0870-5283 Institutional support: RVO:67985955 Keywords : algebra * Descartes * Euclid * geometry * multiplication * proportion theory * structure Subject RIV: AA - Philosophy ; Religion OBOR OECD: Philosophy, History and Philosophy of science and technology

  14. An increasing proportion of infants weight more than 4000 grams at birth

    DEFF Research Database (Denmark)

    Ørskou, J.; Kesmodel, Ulrik; Henriksen, Tine Brink

    2001-01-01

    Background. To investigate how mean birthweight has changed in the past decade, and to describe changes in the proportion of infants with a birthweight above 4000 grams (g). Methods. We analyzed data on 43,561 singleton infants born between 1990 and 1999 at Aarhus University Hospital, Denmark...

  15. The Role of Surprising Events in a Math-game on Proportional Reasoning

    NARCIS (Netherlands)

    Wouters, Pieter; van Oostendorp, Herre; ter Vrugte, Judith; de Jong, Ton; Vandercruysse, Sylke; Elen, Jan

    2015-01-01

    This study examines whether surprising events can be used to stimulate students’ playful learning in a GBL environment in the domain of proportional reasoning. The assumed effect of surprise is that unexpected events interrupt an expectation and therefore triggers the player to evaluate the new

  16. The ATLAS Transition Radiation Tracker (TRT) proportional drift tube: design and performance

    Science.gov (United States)

    ATLAS TRT Collaboration; Abat, E.; Addy, T. N.; Åkesson, T. P. A.; Alison, J.; Anghinolfi, F.; Arik, E.; Arik, M.; Atoian, G.; Auerbach, B.; Baker, O. K.; Banas, E.; Baron, S.; Bault, C.; Becerici, N.; Beddall, A.; Beddall, A. J.; Bendotti, J.; Benjamin, D. P.; Bertelsen, H.; Bingul, A.; Blampey, H.; Bocci, A.; Bochenek, M.; Bondarenko, V. G.; Bychkov, V.; Callahan, J.; Capeáns Garrido, M.; Cardiel Sas, L.; Catinaccio, A.; Cetin, S. A.; Chandler, T.; Chritin, R.; Cwetanski, P.; Dam, M.; Danielsson, H.; Danilevich, E.; David, E.; Degenhardt, J.; Di Girolamo, B.; Dittus, F.; Dixon, N.; Dogan, O. B.; Dolgoshein, B. A.; Dressnandt, N.; Driouchi, C.; Ebenstein, W. L.; Eerola, P.; Egede, U.; Egorov, K.; Evans, H.; Farthouat, P.; Fedin, O. L.; Fowler, A. J.; Fratina, S.; Froidevaux, D.; Fry, A.; Gagnon, P.; Gavrilenko, I. L.; Gay, C.; Ghodbane, N.; Godlewski, J.; Goulette, M.; Gousakov, I.; Grigalashvili, N.; Grishkevich, Y.; Grognuz, J.; Hajduk, Z.; Hance, M.; Hansen, F.; Hansen, J. B.; Hansen, P. H.; Hare, G. A.; Harvey, A., Jr.; Hauviller, C.; High, A.; Hulsbergen, W.; Huta, W.; Issakov, V.; Istin, S.; Jain, V.; Jarlskog, G.; Jeanty, L.; Kantserov, V. A.; Kaplan, B.; Kapliy, A. S.; Katounine, S.; Kayumov, F.; Keener, P. T.; Kekelidze, G. D.; Khabarova, E.; Khristachev, A.; Kisielewski, B.; Kittelmann, T. H.; Kline, C.; Klinkby, E. B.; Klopov, N. V.; Ko, B. R.; Koffas, T.; Kondratieva, N. V.; Konovalov, S. P.; Koperny, S.; Korsmo, H.; Kovalenko, S.; Kowalski, T. Z.; Krüger, K.; Kramarenko, V.; Kudin, L. G.; LeBihan, A.-C.; LeGeyt, B. C.; Levterov, K.; Lichard, P.; Lindahl, A.; Lisan, V.; Lobastov, S.; Loginov, A.; Loh, C. W.; Lokwitz, S.; Long, M. C.; Lucas, S.; Lucotte, A.; Luehring, F.; Lundberg, B.; Mackeprang, R.; Maleev, V. P.; Manara, A.; Mandl, M.; Martin, A. J.; Martin, F. F.; Mashinistov, R.; Mayers, G. M.; McFarlane, K. W.; Mialkovski, V.; Mills, B. M.; Mindur, B.; Mitsou, V. A.; Mjörnmark, J. U.; Morozov, S. V.; Morris, E.; Mouraviev, S. V.; Muir, A. M.; Munar, A.; Nadtochi, A. V.; Nesterov, S. Y.; Newcomer, F. M.; Nikitin, N.; Novgorodova, O.; Novodvorski, E. G.; Ogren, H.; Oh, S. H.; Oleshko, S. B.; Olivito, D.; Olszowska, J.; Ostrowicz, W.; Passmore, M. S.; Patrichev, S.; Penwell, J.; Perez-Gomez, F.; Peshekhonov, V. D.; Petersen, T. C.; Petti, R.; Placci, A.; Poblaguev, A.; Pons, X.; Price, M. J.; hne, O. Rø; Reece, R. D.; Reilly, M. B.; Rembser, C.; Romaniouk, A.; Rousseau, D.; Rust, D.; Ryabov, Y. F.; Ryjov, V.; Söderberg, M.; Savenkov, A.; Saxon, J.; Scandurra, M.; Schegelsky, V. A.; Scherzer, M. I.; Schmidt, M. P.; Schmitt, C.; Sedykh, E.; Seliverstov, D. M.; Shin, T.; Shmeleva, A.; Sivoklokov, S.; Smirnov, S. Yu; Smirnova, L.; Smirnova, O.; Smith, P.; Sosnovtsev, V. V.; Sprachmann, G.; Subramania, S.; Suchkov, S. I.; Sulin, V. V.; Szczygiel, R. R.; Tartarelli, G.; Thomson, E.; Tikhomirov, V. O.; Tipton, P.; Valls Ferrer, J. A.; Van Berg, R.; Vassilakopoulos, V. I.; Vassilieva, L.; Wagner, P.; Wall, R.; Wang, C.; Whittington, D.; Williams, H. H.; Zhelezko, A.; Zhukov, K.

    2008-02-01

    A straw proportional counter is the basic element of the ATLAS Transition Radiation Tracker (TRT). Its detailed properties as well as the main properties of a few TRT operating gas mixtures are described. Particular attention is paid to straw tube performance in high radiation conditions and to its operational stability.

  17. A novel Tissue-Equivalent Proportional Counter based on a Gas Electron Multiplier

    NARCIS (Netherlands)

    Farahmand, M.

    2004-01-01

    Ionising radiation causes a wide variety of effects in biological targets. In experimental microdosimetry these effects are studied by investigating the statistical distribution of energy deposition events at the microscopic level employing a Tissue-Equivalent Proportional Counter (TEPC). A TEPC is

  18. Proportionality And The Limitation Clauses Of The South African Bill Of Rights

    Directory of Open Access Journals (Sweden)

    IM (Ig Rautenbach

    2014-12-01

    Full Text Available "Proportionality" is a contemporary heavy-weight concept which has been described as an element of a globalised international grammar and as a foundational element of global constitutionalism. The article firstly describes the elements of proportionality as they are generally understood in foreign systems, namely whether the limitation pursues a legitimate aim, whether the limitation is capable of achieving this aim, whether the act impairs the right as little as possible and the so-called balancing stage when it must be determined whether the achievement of the aim outweighs the limitation imposed. The German academic Alexy (Theorie der Grundrechte (1986 developed what he called a mathematical weight formula to deal with the balancing stage. An overview is provided of how the elements of proportionality were dealt with in the text of the South African interim Constitution of 1994, the early jurisprudence of the Constitutional Court, and in the text of the final Constitution of 1996. Contemporary South African academic criticism of the use of the concept is also analysed. The article then endeavours to relate the elements of Alexy’s weight formula to both the elements of the South African general limitation clause in section 36 of the Constitution and to the appearance of such elements in the formulation of specific rights in the Bill of Rights. Although the levels of abstraction reached in the debates on the Alexy formula are so daunting that it is most unlikely that South African courts and practitioners will ever use it, certain valuable insights can be gained from it for the purposes of dealing with proportionality within the context of the limitation of rights in South Africa. Despite opposition from certain academics, proportionality is a prominent feature of the application of the limitation clauses in the South African Constitution. The elements of proportionality provides a useful tool for the application, within the context of the

  19. Leg Length, Body Proportion, and Health: A Review with a Note on Beauty

    Science.gov (United States)

    Bogin, Barry; Varela-Silva, Maria Inês

    2010-01-01

    Decomposing stature into its major components is proving to be a useful strategy to assess the antecedents of disease, morbidity and death in adulthood. Human leg length (femur + tibia), sitting height (trunk length + head length) and their proportions, for example, (leg length/stature), or the sitting height ratio (sitting height/stature × 100), among others) are associated with epidemiological risk for overweight (fatness), coronary heart disease, diabetes, liver dysfunction and certain cancers. There is also wide support for the use of relative leg length as an indicator of the quality of the environment for growth during infancy, childhood and the juvenile years of development. Human beings follow a cephalo-caudal gradient of growth, the pattern of growth common to all mammals. A special feature of the human pattern is that between birth and puberty the legs grow relatively faster than other post-cranial body segments. For groups of children and youth, short stature due to relatively short legs (i.e., a high sitting height ratio) is generally a marker of an adverse environment. The development of human body proportions is the product of environmental x genomic interactions, although few if any specific genes are known. The HOXd and the short stature homeobox-containing gene (SHOX) are genomic regions that may be relevant to human body proportions. For example, one of the SHOX related disorders is Turner syndrome. However, research with non-pathological populations indicates that the environment is a more powerful force influencing leg length and body proportions than genes. Leg length and proportion are important in the perception of human beauty, which is often considered a sign of health and fertility. PMID:20617018

  20. Ontogenetic changes in limb bone structural proportions in mountain gorillas (Gorilla beringei beringei).

    Science.gov (United States)

    Ruff, Christopher B; Burgess, M Loring; Bromage, Timothy G; Mudakikwa, Antoine; McFarlin, Shannon C

    2013-12-01

    Behavioral studies indicate that adult mountain gorillas (Gorilla beringei) are the most terrestrial of all nonhuman hominoids, but that infant mountain gorillas are much more arboreal. Here we examine ontogenetic changes in diaphyseal strength and length of the femur, tibia, humerus, radius, and ulna in 30 Virunga mountain gorillas, including 18 immature specimens and 12 adults. Comparisons are also made with 14 adult western lowland gorillas (Gorilla gorilla gorilla), which are known to be more arboreal than adult mountain gorillas. Infant mountain gorillas have significantly stronger forelimbs relative to hind limbs than older juveniles and adults, but are nonsignificantly different from western lowland gorilla adults. The change in inter-limb strength proportions is abrupt at about two years of age, corresponding to the documented transition to committed terrestrial quadrupedalism in mountain gorillas. The one exception is the ulna, which shows a gradual increase in strength relative to the radius and other long bones during development, possibly corresponding to the gradual adoption of stereotypical fully pronated knuckle-walking in older juvenile gorillas. Inter-limb bone length proportions show a contrasting developmental pattern, with hind limb/forelimb length declining rapidly from birth to five months of age, and then showing no consistent change through adulthood. The very early change in length proportions, prior to significant independent locomotion, may be related to the need for relatively long forelimbs for climbing in a large-bodied hominoid. Virunga mountain gorilla older juveniles and adults have equal or longer forelimb relative to hind limb bones than western lowland adults. These findings indicate that both ontogenetically and among closely related species of Gorilla, long bone strength proportions better reflect actual locomotor behavior than bone length proportions. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Proportion of categories of associates and structure of the mental lexicon

    Directory of Open Access Journals (Sweden)

    Savić Irena

    2008-01-01

    Full Text Available The aim of this study was to investigate whether there is a systematic distinction between associate pairs that constitute categories of lexical relations (e.g. synonyms, antonyms, hyponyms etc. and categories of associate pairs that have no obvious lexical relation. Proportion of categories of associates were estimated on 80 nouns from "Associative Dictionary of Serbian Language" (Piper, Dragićević & Stefanović, 2005, while frequencies of associates were estimated from "Frequency Dictionary of Contemporary Serbian Language" (Kostić, Đ., 1999. Categories of associates were divided into two groups: group of categories that included standard lexical relations and group that included idiosyncratic associates. Proportions of categories were analyzed with respect to a frequency of a noun to which associates were generated and b whether it was an abstract or concrete noun. Three measures were used to estimate proportion of categories: a number of associates, b sum frequency of associates and c the average frequency per associate. When estimated with respect to number of associates and sum frequency of associates proportion of categories that included standard lexical relations were negligible (6% and 18%, but they become dominant when estimated with respect to the average frequency per associate. Such an outcome suggests that categories that include standard lexical relations are characterized by small number of associates (due to the fact that they are closed classes with high frequency associates. Distinction between abstract and concrete nouns did not affect number of associates per category, which was not the case when proportions were estimated with respect to sum frequency of associates. Frequency of a noun to which associates were generated has no effect on productivity of associates, nor does it affects sum frequency per category. However, it has significant effect on the average frequency per associate within a given category.

  2. Influences of Duration of Inspiratory Effort, Respiratory Mechanics, and Ventilator Type on Asynchrony With Pressure Support and Proportional Assist Ventilation.

    Science.gov (United States)

    Vasconcelos, Renata S; Sales, Raquel P; Melo, Luíz H de P; Marinho, Liégina S; Bastos, Vasco Pd; Nogueira, Andréa da Nc; Ferreira, Juliana C; Holanda, Marcelo A

    2017-05-01

    Pressure support ventilation (PSV) is often associated with patient-ventilator asynchrony. Proportional assist ventilation (PAV) offers inspiratory assistance proportional to patient effort, minimizing patient-ventilator asynchrony. The objective of this study was to evaluate the influence of respiratory mechanics and patient effort on patient-ventilator asynchrony during PSV and PAV plus (PAV+). We used a mechanical lung simulator and studied 3 respiratory mechanics profiles (normal, obstructive, and restrictive), with variations in the duration of inspiratory effort: 0.5, 1.0, 1.5, and 2.0 s. The Auto-Trak system was studied in ventilators when available. Outcome measures included inspiratory trigger delay, expiratory trigger asynchrony, and tidal volume (V T ). Inspiratory trigger delay was greater in the obstructive respiratory mechanics profile and greatest with a effort of 2.0 s (160 ms); cycling asynchrony, particularly delayed cycling, was common in the obstructive profile, whereas the restrictive profile was associated with premature cycling. In comparison with PSV, PAV+ improved patient-ventilator synchrony, with a shorter triggering delay (28 ms vs 116 ms) and no cycling asynchrony in the restrictive profile. V T was lower with PAV+ than with PSV (630 mL vs 837 mL), as it was with the single-limb circuit ventilator (570 mL vs 837 mL). PAV+ mode was associated with longer cycling delays than were the other ventilation modes, especially for the obstructive profile and higher effort values. Auto-Trak eliminated automatic triggering. Mechanical ventilation asynchrony was influenced by effort, respiratory mechanics, ventilator type, and ventilation mode. In PSV mode, delayed cycling was associated with shorter effort in obstructive respiratory mechanics profiles, whereas premature cycling was more common with longer effort and a restrictive profile. PAV+ prevented premature cycling but not delayed cycling, especially in obstructive respiratory mechanics

  3. What proportion of renewable energy supplies is needed to initially mitigate CO{sub 2} emissions in OECD member countries?

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, Chien-Liang [Department of Banking and Finance, Tamkang University, Taipei County 251 (China); Chang, Ting-Huan [Department of Banking and Finance, Tamkang University, Taipei County 251 (China); Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu County 310 (China)

    2009-08-15

    In spite of increasing numbers of countries having established renewable energy development mechanisms for carbon dioxide (CO{sub 2}) emissions reduction, the CO{sub 2} emissions problem continues to worsen along with the growth of the world economy. This leads us to examine the threshold effect of the proportion of renewable energy supply for CO{sub 2} emissions reduction by means of the panel threshold regression model (PTR). Economic growth and the price of energy are also both taken into account in the model in measuring the specific influence that each of them has on CO{sub 2} emissions. The empirical panel data encompass all 30 member countries of the OECD and cover a period of about a decade in length from 1996 to 2005. Our empirical results provide clear evidence of the existence of a single threshold effect that may be divided into lower and higher regimes. Based on the specific estimates of the slope coefficients in each regime distinguished, we find that a renewable energy supply accounting for at least 8.3889% of total energy supply would mean that CO{sub 2} emissions would start to be mitigated. Furthermore, real GDP and the CPI of energy are significantly and positively and insignificantly and negatively correlated with CO{sub 2} emissions, respectively. These findings lead us to conclude that the authorities ought to enhance the proportion of renewable energy supply to more than 8.3889% of all energy supplied, which might help resolve the dilemma between economic growth and CO{sub 2} emissions. Realizing the effects of CO{sub 2} emissions reduction via energy price reforms or the levying of a carbon tax levy may, however, still remain a puzzle. (author)

  4. Development of a screened cathode gas flow proportional counter for in situ field determination of alpha contamination in soil

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.P.

    1997-02-01

    This study resulted in the design, construction and testing of a gas flow proportional counter for in-situ determination of soil contamination. The uniqueness of this detector is the screened material used for the cathode. A Pu-239 source of 0.006 {micro}Ci was mounted to the outside of the cathode to simulate radioactive soil. The detector probe was placed into a laboratory mock-up and tested to determine operating voltage, efficiency and energy resolution. Two gas flow proportional counters were built and tested. The detectors are cylindrical, each with a radius of 1.905 cm, having an anode wire with a radius of 0.0038 cm. The length of the smaller detector`s anode was 2.54 cm, and the length of the larger detector`s anode was 7.64 cm. Therefore, the active volumes were 28.96 cm{sup 3} and 87.10 cm{sup 3}, respectively, for the small and large detector. An operating voltage of 1,975 volts was determined to be sufficient for both detectors. The average efficiency was 2.59 {+-} 0.12% and 76.71 {+-} 10.81% for the small volume and large volume detectors, respectively. The average energy resolution for the low-energy peak of the small detector was 4.24 {+-} 1.28% and for the large-energy peak was 1.37 {+-} 0.66%. The large detectors` energy resolution was 17.75 {+-} 3.74%. The smaller detector, with better energy resolution, exhibited a bi-modal spectrum, whereas the larger detector`s spectrum centered around a single broad peak.

  5. Development and application of a two-tier diagnostic instrument to assess middle years students' proportional reasoning

    DEFF Research Database (Denmark)

    Hilton, Annette; Hilton, Geoff; Dole, Shelley

    2013-01-01

    Proportional reasoning involves the use of ratios in the comparison of quantities. While it is a key aspect of numeracy, particularly in the middle years of schooling, students do not always develop proportional reasoning naturally. Research suggests that many students do not apply proportional m...

  6. Exact and approximate area-proportional circular Venn and Euler diagrams.

    Science.gov (United States)

    Wilkinson, Leland

    2012-02-01

    Scientists conducting microarray and other experiments use circular Venn and Euler diagrams to analyze and illustrate their results. As one solution to this problem, this paper introduces a statistical model for fitting area-proportional Venn and Euler diagrams to observed data. The statistical model outlined in this paper includes a statistical loss function and a minimization procedure that enables formal estimation of the Venn/Euler area-proportional model for the first time. A significance test of the null hypothesis is computed for the solution. Residuals from the model are available for inspection. As a result, this algorithm can be used for both exploration and inference on real data sets. A Java program implementing this algorithm is available under the Mozilla Public License. An R function venneuler() is available as a package in CRAN and a plugin is available in Cytoscape.

  7. Comparative limb proportions reveal differential locomotor morphofunctions of alligatoroids and crocodyloids

    Science.gov (United States)

    Iijima, Masaya; Kubo, Tai; Kobayashi, Yoshitsugu

    2018-03-01

    Although two major clades of crocodylians (Alligatoroidea and Crocodyloidea) were split during the Cretaceous period, relatively few morphological and functional differences between them have been known. In addition, interaction of multiple morphofunctional systems that differentiated their ecology has barely been assessed. In this study, we examined the limb proportions of crocodylians to infer the differences of locomotor functions between alligatoroids and crocodyloids, and tested the correlation of locomotor and feeding morphofunctions. Our analyses revealed crocodyloids including Gavialis have longer stylopodia (humerus and femur) than alligatoroids, indicating that two groups may differ in locomotor functions. Fossil evidence suggested that alligatoroids have retained short stylopodia since the early stage of their evolution. Furthermore, rostral shape, an indicator of trophic function, is correlated with limb proportions, where slender-snouted piscivorous taxa have relatively long stylopodia and short overall limbs. In combination, trophic and locomotor functions might differently delimit the ecological opportunity of alligatoroids and crocodyloids in the evolution of crocodylians.

  8. Development of a drift tissue equivalent proportional counter for radiation protection personnel dosimetry

    International Nuclear Information System (INIS)

    Bordy, J.M.

    1992-04-01

    A new multicellular geometry for proportional counter has been developed. It is made of several drift regions which are some holes drilled in the cathode in front of anodes wires. The present work is made of 3 parts: 1) A theoretical evaluation of the multicellular counter characteristics: the sensitivity increases by a factor 15 vs the Tinelli Merlin-Gerin counter; the chord length distribution study shows the possibility to use a Dirac function for the dosimetry calculations; a tissue equivalent gas mixture based on argon and propane is designed. 2) The production of a monocellular prototype made of a hole and a needle shaped anode. 3) An experimental study of the prototype electrical characteristics and a computation of the electrical field in the counter. The focalization and the electron drift into the hole, the proportional operating mode are shown. Irradiations in front of photon and neutron sources verify these results

  9. Hereditary Portfolio Optimization with Taxes and Fixed Plus Proportional Transaction Costs—Part II

    Directory of Open Access Journals (Sweden)

    Mou-Hsiung Chang

    2007-01-01

    Full Text Available This paper is the continuation of the paper entitled “Hereditary portfolio optimization with taxes and fixed plus proportional transaction costs I” that treats an infinite-time horizon hereditary portfolio optimization problem in a market that consists of one savings account and one stock account. Within the solvency region, the investor is allowed to consume from the savings account and can make transactions between the two assets subject to paying capital-gain taxes as well as a fixed plus proportional transaction cost. The investor is to seek an optimal consumption-trading strategy in order to maximize the expected utility from the total discounted consumption. The portfolio optimization problem is formulated as an infinite dimensional stochastic classical impulse control problem due to the hereditary nature of the stock price dynamics and inventories. This paper contains the verification theorem for the optimal strategy. It also proves that the value function is a viscosity solution of the QVHJBI.

  10. Multiwire-based 2π proportional chamber for large area beta sources

    International Nuclear Information System (INIS)

    Desai, Shraddha S.; Devan, Shylaja; Prasad, N.K.; Leena, J.; Anuradha, R.

    2013-01-01

    The proportional counter for surface emission counting of large-area beta sources is indigenously developed. The detector is multiwire-based proportional counter with gas flow facility and is designed for 2π mode counting of planar beta sources. The detector is rugged, stable and convenient to operate. Complete detector assembly consists of a vacuum tight aluminum enclosure, multiwire grid, sliding source tray, vacuum system, gas flow system and pulse processing units. Qualitative position dependent behavior of detector over the sensitive region is initially tested using a collimated 55 Fe X-ray source. Characterization of the detector is carried out using 90 Sr extended beta sources of various emission activities. These sources are further used to calibrate efficiency of radiological contamination monitors located at various nuclear facilities. Details of design, fabrication and characterization of the chamber are presented. (author)

  11. Proportional counters aged anode wire recovering using an 80%CF4 + 20%CO2 gas mixture

    CERN Document Server

    Gavrilov, Gennady; Conti, Richard; Fetisov, Andrey; Maysuzenko, Dmitry; Shvecova, Natalia; Vakhtel, Victor

    2011-01-01

    A technique to recover a gas proportional counter having an aged anode wire using a glow discharge in an 80%CF4 + 20%CO2 gas mixture has been developed and tested. Studies of aging effects were carried out under sustained irradiation by an intense 90Sr -source of the straw proportional counters operated with a 60%Ar + 30%CO2 + 10%CF4 gas mixture. Special attention was paid to the aging mechanism of the anode wires. Our experience showed that using a given gas mixture the swelling of the anode wires is a typical mode of aging that leads to degradation of the gas gain. The proposed method of recovery provided a complete restoration of the gas gain and the signal amplitude in the damaged zone of the wire. SEM/XEM analysis confirmed successful cleaning WOx deposits from the wire surface. The application of this method to recover the aged gaseous detectors in real experimental conditions is discussed.

  12. A novel robust proportional-integral (PI) adaptive observer design for chaos synchronization

    International Nuclear Information System (INIS)

    Pourgholi Mahdi; Majd Vahid Johari

    2011-01-01

    In this paper, chaos synchronization in the presence of parameter uncertainty, observer gain perturbation and exogenous input disturbance is considered. A nonlinear non-fragile proportional-integral (PI) adaptive observer is designed for the synchronization of chaotic systems; its stability conditions based on the Lyapunov technique are derived. The observer proportional and integral gains, by converting the conditions into linear matrix inequality (LMI), are optimally selected from solutions that satisfy the observer stability conditions such that the effect of disturbance on the synchronization error becomes minimized. To show the effectiveness of the proposed method, simulation results for the synchronization of a Lorenz chaotic system with unknown parameters in the presence of an exogenous input disturbance and abrupt gain perturbation are reported. (general)

  13. The Application of Extended Cox Proportional Hazard Method for Estimating Survival Time of Breast Cancer

    Science.gov (United States)

    Husain, Hartina; Astuti Thamrin, Sri; Tahir, Sulaiha; Mukhlisin, Ahmad; Mirna Apriani, M.

    2018-03-01

    Breast cancer is one type of cancer that is the leading cause of death worldwide. This study aims to model the factors that affect the survival time and rate of cure of breast cancer patients. The extended cox model, which is a modification of the proportional hazard cox model in which the proportional hazard assumptions are not met, is used in this study. The maximum likelihood estimation approach is used to estimate the parameters of the model. This method is then applied to medical record data of breast cancer patient in 2011-2016, which is taken from Hasanuddin University Education Hospital. The results obtained indicate that the factors that affect the survival time of breast cancer patients are malignancy and leukocyte levels.

  14. Position-sensitive proportional counters using resistance-capacitance position encoding

    International Nuclear Information System (INIS)

    Kopp, M.K.; Borkowski, C.J.

    1975-12-01

    A new method was developed for encoding the position of individual photons, neutrons, or charged particles in proportional counters by using the distributed RC line characteristics of these counters. The signal processing is described and guidelines for the design and operation of these position sensitive proportional counters (PSPCs) are given. Using these guidelines, several prototypic PSPCs were constructed to improve the spatial resolution and shorten the signal processing time; for example, the intrinsic spatial uncertainty was reduced to 28 μ fwhm for alpha particles and 100 μ fwhm for low-energy x rays (2 to 6 keV). Also, the signal processing time was reduced to 0.6 μsec without seriously degrading the spatial resolution. These results have opened new fields of application of the RC position encoding method in imaging distributions of photons, charged particles, or neutrons in nuclear medicine, physics, and radiography

  15. 39Ar/Ar measurements using ultra-low background proportional counters

    International Nuclear Information System (INIS)

    Hall, Jeter; Aalseth, Craig E.; Bonicalzi, Ricco M.; Brandenberger, Jill M.; Day, Anthony R.; Humble, Paul H.; Mace, Emily K.; Panisko, Mark E.; Seifert, Allen

    2016-01-01

    Age-dating groundwater and seawater using the 39 Ar/Ar ratio is an important tool to understand water mass-flow rates and mean residence time. Low-background proportional counters developed at Pacific Northwest National Laboratory use mixtures of argon and methane as counting gas. We demonstrate sensitivity to 39 Ar by comparing geological (ancient) argon recovered from a carbon dioxide gas well and commercial argon. The demonstrated sensitivity to the 39 Ar/Ar ratio is sufficient to date water masses as old as 1000 years. - Highlights: • 39 Ar/Ar age dating is important for understanding environmental water migration. • Ultra low background proportional counters have been developed. • 39 Ar is detected in atmospheric argon at a rate of 70.3 counts per day. The demonstrated background is 166 counts per day. • Age dating is possible for water with underground residence time of up to 1000 years.

  16. Estimating the proportion of variation in susceptibility to schizophrenia captured by common SNPs

    DEFF Research Database (Denmark)

    Lee, S Hong; DeCandia, Teresa R; Ripke, Stephan

    2012-01-01

    Schizophrenia is a complex disorder caused by both genetic and environmental factors. Using 9,087 affected individuals, 12,171 controls and 915,354 imputed SNPs from the Schizophrenia Psychiatric Genome-Wide Association Study (GWAS) Consortium (PGC-SCZ), we estimate that 23% (s.e. = 1......%) of variation in liability to schizophrenia is captured by SNPs. We show that a substantial proportion of this variation must be the result of common causal variants, that the variance explained by each chromosome is linearly related to its length (r = 0.89, P = 2.6 × 10(-8)), that the genetic basis...... of schizophrenia is the same in males and females, and that a disproportionate proportion of variation is attributable to a set of 2,725 genes expressed in the central nervous system (CNS; P = 7.6 × 10(-8)). These results are consistent with a polygenic genetic architecture and imply more individual SNP...

  17. X-ray polarimetry with a conventional gas proportional counter through rise-time analysis

    CERN Document Server

    Hayashida, K; Tsunemi, H; Torii, K; Murakami, H; Ohno, Y; Tamura, K

    1999-01-01

    We have performed an experiment on the signal rise time of a Xe gas proportional counter using a polarized X-ray beam of synchrotron orbital radiation with energies from 10 to 40 keV. When the counter anode is perpendicular to the electric vector of the incident X-ray photons, the average rise time becomes significantly longer than that for the parallel case. This indicates that the conventional gas proportional counters are useful for X-ray polarimetry. The moderate modulation contrast of this rise-time polarimeter (M=0.1 for 10 keV X-rays and M=0.35 for 40 keV X-rays), with capability of the simultaneous measuring X-ray energies and the timing, would be useful for applications in X-ray astronomy and in other fields.

  18. X-ray proportional counter with neon for analysis and control of light impurities

    International Nuclear Information System (INIS)

    Petrascu, H.; Petrascu, M.; Apostolescu, S.; Caragheorgheopol, G.

    1992-01-01

    To manufacture a high-resolution proportional counter sensitive to the 2.3 keV sulfur X-rays, a neon counter prototype was developed. The window of this counter consisted of beryllium, 15 mm in diameter and 0.15 mm thick. The counter was filled with neon at the pressure of 1 bar. To realize this prototype a technology work out for xenon proportional counters was used. The resolution of the counter at the K α sulfur line turned out to be 0.58 keV, better than the resolution of a xenon counter, which in term presented itself a very good resolution (0.85 keV) at the K α Mn line. This counter will be used for controlling sulfur technology processes and sulfur contaminations. (Author)

  19. Study of counter E.M.F. on external cathodes proportional counters

    International Nuclear Information System (INIS)

    Tobias, C.C.B.

    1990-01-01

    Results previously obtained in our laboratory with Geiger-Mueller counters with external cathodes (Maze type), led us to build a cylindrical proportional counter around a tube of soda glass, covered by a thin layer of acquadag. The characteristics of this proportional counter were studied for argon and argon-methane mixture at atmospheric pressure, under continuous flow. Using alpha particles, emitted by an Am-241 source, the results obtained shown that its pulse amplitude decreases slowly with an increase of the counting rate, due to the counter e.m.f. which appears between the internal counter surface and the external cathode. This small effect, does not influence either the pulse amplitude distribution or the resolution, due to the large time constant of the distributed charge. (author)

  20. The effect of geometrical scaling on the gas gain of proportional counters intended for microdosimetric measurements

    International Nuclear Information System (INIS)

    Waker, A.J.; Maynard, D.G.

    1989-01-01

    Measurements of the relative gas gain of three cylindrical proportional counters covering two orders of magnitude in diameter have been carried out using two types of tissue-equivalent gas commonly employed in microdosimetry. Gas pressures have been used such that each counter simulated unit density volumes 0.5, 2 and 5 μm in diameter. In general, the results are consistent with the assumption that the scaling of proportional counters in terms of physical size and gas pressure does not significantly alter their operational characteristics. Actual gas gains were found to increase with decreasing counter size and hence increasing pressure for all simulated diameters. Other constructional factors, however, are likely to have more significance in counter design, particularly for small counters a few millimeters in size. (author)

  1. Global Asymptotic Stability of Impulsive CNNs with Proportional Delays and Partially Lipschitz Activation Functions

    Directory of Open Access Journals (Sweden)

    Xueli Song

    2014-01-01

    Full Text Available This paper researches global asymptotic stability of impulsive cellular neural networks with proportional delays and partially Lipschitz activation functions. Firstly, by means of the transformation vi(t=ui(et, the impulsive cellular neural networks with proportional delays are transformed into impulsive cellular neural networks with the variable coefficients and constant delays. Secondly, we provide novel criteria for the uniqueness and exponential stability of the equilibrium point of the latter by relative nonlinear measure and prove that the exponential stability of equilibrium point of the latter implies the asymptotic stability of one of the former. We furthermore obtain a sufficient condition to the uniqueness and global asymptotic stability of the equilibrium point of the former. Our method does not require conventional assumptions on global Lipschitz continuity, boundedness, and monotonicity of activation functions. Our results are generalizations and improvements of some existing ones. Finally, an example and its simulations are provided to illustrate the correctness of our analysis.

  2. The positive ions mobility in the gas mixtures for filling the proportional counter

    International Nuclear Information System (INIS)

    Jagusztyn, W.

    1979-01-01

    A description of a new method of the positive ions mobility measurements in the gas mixtures for filling proportional counters is presented. The positive ions mobility has been determined for the selected gas mixtures with Ar, Kr and Xe as the main components. The influence of the type and the amount of admixture on the positive ions mobility has been discussed on the base of the achieved results. (author)

  3. Enhanced learning of proportional math through music training and spatial-temporal training.

    Science.gov (United States)

    Graziano, A B; Peterson, M; Shaw, G L

    1999-03-01

    It was predicted, based on a mathematical model of the cortex, that early music training would enhance spatial-temporal reasoning. We have demonstrated that preschool children given six months of piano keyboard lessons improved dramatically on spatial-temporal reasoning while children in appropriate control groups did not improve. It was then predicted that the enhanced spatial-temporal reasoning from piano keyboard training could lead to enhanced learning of specific math concepts, in particular proportional math, which is notoriously difficult to teach using the usual language-analytic methods. We report here the development of Spatial-Temporal Math Video Game software designed to teach fractions and proportional math, and its strikingly successful use in a study involving 237 second-grade children (age range six years eight months-eight years five months). Furthermore, as predicted, children given piano keyboard training along with the Math Video Game training scored significantly higher on proportional math and fractions than children given a control training along with the Math Video Game. These results were readily measured using the companion Math Video Game Evaluation Program. The training time necessary for children on the Math Video Game is very short, and they rapidly reach a high level of performance. This suggests that, as predicted, we are tapping into fundamental cortical processes of spatial-temporal reasoning. This spatial-temporal approach is easily generalized to teach other math and science concepts in a complementary manner to traditional language-analytic methods, and at a younger age. The neural mechanisms involved in thinking through fractions and proportional math during training with the Math Video Game might be investigated in EEG coherence studies along with priming by specific music.

  4. A Challenge to Classical Facial Proportionality Studies: Conventional Profile and 3d Photography Versus Silhouettes

    Science.gov (United States)

    2012-04-01

    of beauty by the Romans and several hundred years later, the influence of the artists of the Renaissance have evolved the concept of beauty to be a...is a subject not just limited to the dental specialties of orthodontics and oral and maxillofacial surgery , but one which interests a multitude of...degree of involvement in planning treatment, the arrival of orthognathic surgery made it possible to correct facial proportions that were otherwise

  5. Demand-type gas supply system for rocket borne thin-window proportional counters

    Science.gov (United States)

    Acton, L. W.; Caravalho, R.; Catura, R. C.; Joki, E. G.

    1977-01-01

    A simple closed loop control system has been developed to maintain the gas pressure in thin-window proportional counters during rocket flights. This system permits convenient external control of detector pressure and system flushing rate. The control system is activated at launch with the sealing of a reference volume at the existing system pressure. Inflight control to plus or minus 2 torr at a working pressure of 760 torr has been achieved on six rocket flights.

  6. EMERGENCE, GROWTH AND PRODUCTION OF SESAME UNDER SALT STRESS AND PROPORTIONS OF NITRATE AND AMMONIUM

    Directory of Open Access Journals (Sweden)

    ADAAN SUDARIO DIAS

    2017-01-01

    Full Text Available In arid and semi - arid regions, the quality of irrigation water varies in geographic terms and during the year, and the occurrence of water with high concentrations of salts is common. In this context, this study aimed to evaluate the emergence, growth and production of sesame, cultivar CNPA G3, irrigated with saline water and fertilized with N of different carrier proportions by the ratio of nitrate and ammonium ( NO 3 - - N and NH 4 + - N in an experiment conducted in lysimeters arranged in a greenhouse in the municipality of Campina Grande - PB, Brazil. The treatments were distributed into randomized blocks using a 5 × 5 factorial scheme relative to levels of irrigation water salinity (ECw; 0.6, 1.2, 1.8, 2.4 and 3.0 dS m - 1 and five proportions of NO 3 - - N/NH 4 + - N (200/0; 150/50; 100/100; 50/150 and 0/200 mg of N kg - 1 , with three replicates. The increase in ECw compromised the emergence, growth and production of sesame, cultivar CNPA G3, and the production components were the most sensitive variables. The highest growth in diameter was obtained with the proportion of 200/0 mg kg - 1 of NO 3 - - N /NH 4 + - N . An ECw level of 3.0 dS m - 1 and fertilization with 0/200 mg kg - 1 of NO 3 - - N /NH 4 + - N promoted deleterious effects on the total mass of sesame fruits and mass of seeds. The interaction between water salinity levels and NO 3 - /NH 4 + proportions significantly affected the number of leaves (at 50 and 70 days after sowing, the total mass of fruits and the mass of seeds.

  7. Multiwire proportional chamber and multistage avalanche chamber with low concentration photoionization gas

    International Nuclear Information System (INIS)

    Zhao Pingde; Xu Zhiqing; Tang Xiaowei

    1986-01-01

    The characteristics of multiwire proportional chamber and multistage avalanche chamber filled with argon and photoionization gas (C 2 H 5 ) 3 N were measured. The spatial resolution curves and output pulse height spectra were measured as well. Low concentration (C 2 H 5 ) 3 N can play an effective part in quenching. At very low concentration, the phenomena of avalanche transverse expansion was observed obviously

  8. Proceedings of the symposium on measurements of neutron energy spectra using recoil proton proportional counters

    International Nuclear Information System (INIS)

    Urabe, Itsumasa

    1986-01-01

    This is a report of the symposium on measurements of neutron energy spectra using recoil proton proportional counters held at the Research Reactor Institute of Kyoto University on January 27 in 1986. An energy resolution, wall effects of response functions, n · γ discrimination methods and other fundamental properties of recoil proton counters are discussed for a new development of an application of this counter. (author)

  9. An electronic system for pulse rise time discrimination with a proton recoil proportional counter

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1969-10-01

    This report describes an electronic pulse counting system in current use on the Zero Energy Fast Reactor Zebra at A.E.E. Winfrith for neutron spectra analysis from 3Kev to 1Mev. The system uses a proton recoil proportional counter as detector and incorporates neutron-gamma separation by rise time discrimination. The collected data are stored in an Argus 500 computer for which a three dimensional display is provided. (author)

  10. Assessing the Expectations of Patients Demanding Rhinoplasty on Profile Photographs using Proportional Measurements and Simulation Programs

    Directory of Open Access Journals (Sweden)

    İsmail Küçüker

    2016-06-01

    Full Text Available Objective: The aim of this study was to define the desired profile measurements in patients who demand rhinoplasty and to assess the needs of extra profile surgeries in these patients. Material and Methods: Overall, 100 patients (60 women, 40 men demanding rhinoplasty between January and December 2013 were included in this study. Standard profile photos were taken. Rhinoplasty and extra profile surgeries were simulated in those photos with both patient and surgeon decisions. These simulated photos were assumed as the desired profile view. In those photos, some angles or measurements were calculated to understand the desired proportions on the profile view. Then, these desired proportions were compared with the universal ideal proportions to understand the needs of extra profile surgeries in those patients. Results: It has been found that 43% of women and 27.5% of men would benefit from fat injections to the forehead. Sagittal lowering of the nasion was necessary in 25% of both men and women. Respectively in women and men, demands in; nasolabial angle increase were 85% and 75%, projection increase according to Goode ratio were 35% and 32%, according to Baum ratio, 80 and 75%. Lower chins vertical height was longer than the nose in 18% and 17%, nose was longer than the lower chin in 17% and 7.5% in women and men respectively. Lower 2/3rds of the chin was longer than normal in 21% of the patients in both women and men. In two different proportions, the chin was found to be retruded in 23%–36% and 30%–35% and protruded in 23%–26% and 25%–30% in women and men, respectively. Conclusion: Personal demands may vary from the universal ideals. Therefore, pre-surgical simulations become necessary to assess the extra surgery needs in patients demanding rhinoplasty. These simulations may help the surgeon to personalize the surgery according to the patients demand, and patient satisfaction may increase as a result this approach.

  11. Absorption of riociguat (BAY 63-2521): bioavailability, food effects, and dose proportionality.

    Science.gov (United States)

    Becker, Corina; Frey, Reiner; Hesse, Christiane; Unger, Sigrun; Reber, Michael; Mück, Wolfgang

    2016-03-01

    Riociguat (BAY 63-2521) is the first member of a novel class of compounds, the soluble guanylate cyclase (sGC) stimulators. Riociguat has a dual mode of action: it sensitizes sGC to endogenous nitric oxide (NO) and stimulates sGC independent of NO availability. To characterize the biopharmaceutical properties of riociguat, including absolute bioavailability, food interactions, and dose proportionality, riociguat (intravenous/oral) was administered to healthy male subjects in 3 open-label, randomized, crossover studies: absolute bioavailability (1 mg; [Formula: see text]), food effect (2.5 mg; [Formula: see text]), and dose proportionality (0.5-2.5 mg; [Formula: see text]). Absolute bioavailability was 94% (95% confidence interval [CI], 83%-107%). Riociguat absorption was delayed by a high-fat breakfast with little effect on the extent of absorption (area under the concentration-time curve [AUC]fed∶AUCfasted, 88% [90% CI, 82%-95%]). Exposure to riociguat was dose proportional over all doses (common slope of AUC, 1.09 [90% CI, 1.04-1.14]; maximum concentration, 0.98 [90% CI, 0.93-1.04]). Intraindividual variability was low; interindividual variability was moderate to high. Riociguat was well tolerated, and adverse events were consistent with the mode of action. In conclusion, riociguat shows complete oral absorption, no clinically relevant food effects, and a dose-proportional increase in systemic exposure (0.5-2.5 mg). These data support the suitability of the individualized dose adjustment scheme employed in the phase 3 clinical studies.

  12. Low Proportion of Dietary Plant Protein among Athletes with Premenstrual Syndrome-Related Performance Impairment.

    Science.gov (United States)

    Yamada, Keiko; Takeda, Takashi

    2018-02-01

    Premenstrual syndrome (PMS) is psychosomatic disorder that are limited to the late luteal phase in the menstrual cycle. PMS could impair athletic performance. To investigate associations between proportions of dietary plant and animal protein and PMS-related impairment of athletic performance, we surveyed 135 female athletes aged 18-23 years attending Kindai University. Participants belonged to authorized university clubs, all of which have high rankings in Japanese university sports. Participants completed self-administered questionnaires on diet history, demographics, and PMS-related impairment of athletic performance. Total protein, animal protein, and plant protein intake were examined, and the proportion of dietary plant protein was calculated for each participant. We divided athletes into two groups: those without PMS-related impairment of athletic performance (n = 117) and those with PMS-related performance impairment (n = 18). A t-test was used to compare mean values and multivariable adjusted mean values between groups; adjustment variables were energy intake, body mass index, and daily training duration. Total protein intake was not significantly different between the groups. However, athletes whose performance was affected by PMS reported higher intake of animal protein (mean 50.6 g) than athletes whose performance was unaffected by PMS (mean 34.9 g). Plant protein intake was lower among athletes with PMS-related impairment (mean 25.4 g) than among athletes without impairment (mean 26.9 g). The proportion of dietary plant protein was lower among athletes with PMS-related impairment (39.3%) than those without impairment (45.9%). A low proportion of dietary plant protein may cause PMS-related athletic impairment among athletes.

  13. Reconstruction of charged particle trajectories in multiwire proportional chambers at the BM@N experiment

    International Nuclear Information System (INIS)

    Lenivenko, V.V.; Pal'chik, V.V.

    2017-01-01

    The algorithm for track reconstruction in the multiwire proportional chambers (MWPC) of the BM@N experiment is described. Beam tracks before the interaction with the target and trajectories of charged particles after the interaction are reconstructed using Nuclotron experimental data with deuteron and carbon beams colliding with the carbon and copper targets. Trajectories are extrapolated to the interaction point and to the drift chambers. Efficiencies of MWPCs have been obtained. Beam parameters (transverse dimensions, the angular spread) have been measured. [ru

  14. Spectrometry of the let LET with track etched detectors-correlation with proportional counter measured spectra

    Czech Academy of Sciences Publication Activity Database

    Spurný, František; Bottollier-Depois, J. F.; Vlček, Bohumil

    2001-01-01

    Roč. 32, 1-6 (2001), s. 193-197 ISSN 1350-4487 R&D Projects: GA ČR GA202/01/0710; GA AV ČR KSK1010104 Institutional research plan: CEZ:AV0Z1048901 Keywords : experimental microdosimetry * track etched LET spectrometry * tissue equivalent proportional counter Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.003, year: 2001

  15. Numerical solution of neutral functional-differential equations with proportional delays

    Directory of Open Access Journals (Sweden)

    Mehmet Giyas Sakar

    2017-07-01

    Full Text Available In this paper, homotopy analysis method is improved with optimal determination of auxiliary parameter by use of residual error function for solving neutral functional-differential equations (NFDEs with proportional delays. Convergence analysis and error estimate of method are given. Some numerical examples are solved and comparisons are made with the existing results. The numerical results show that the homotopy analysis method with residual error function is very effective and simple.

  16. Implicit Learning Modulates Attention Capture: Evidence from an Item-Specific Proportion Congruency Manipulation

    Directory of Open Access Journals (Sweden)

    David R Thomson

    2014-06-01

    Full Text Available A host of research has now shown that our explicit goals and intentions can, in large part, overcome the capture of visual attention by objects that differ from their surroundings in terms of size, shape, or color. Surprisingly however, there is little evidence for the role of implicit learning in mitigating capture effects despite the fact that such learning has been shown to strongly affect behavior in a host of other performance domains. Here, we employ a modified attention capture paradigm, based on the work of Theeuwes (1991; 1992, in which participants must search for an odd-shaped target amongst homogeneous distracters. On each trial, there is also a salient, but irrelevant odd-colored distracter. Across the experiments reported, we intermix two search contexts: for one set of distracters (e.g. squares the shape singleton and color singleton coincide on a majority of trials (high proportion congruent condition, whereas for the other set of distracters (e.g. circles the shape and color singletons are highly unlikely to coincide (low proportion congruent condition. Crucially, we find that observers learn to allow the capture of attention by the salient distracter to a greater extent in the high, compared to the low proportion congruent condition, albeit only when search is sufficiently difficult. Moreover, this effect of prior experience on search behavior occurs in the absence of awareness of our proportion manipulation. We argue that low-level properties of the search displays recruit representations of prior experience in a rapid, flexible, and implicit manner.

  17. Proportional analysis of pig kidney arterial segments: differences from the human kidney.

    Science.gov (United States)

    Pereira-Sampaio, Marco; Favorito, Luciano Alves; Henry, Robert; Sampaio, Francisco J B

    2007-07-01

    To present a systematic study and a proportional analysis of the arterial segments of the pig kidney. Sixty-one three-dimensional endocasts of the arterial segments of pig kidneys were studied. Each segment was injected with a resin of a different color. Cavalieri's principle was used to calculate the volume of each renal segment, and these results were compared with the results from the point-counting planimetry method used on photographs of pig-kidney surfaces. Two to five renal segments were observed. Division into two segments, a cranial and a caudal, was the most common (42.62%). The renal volume ranged from 101 to 173 cm(3) (mean 130.85 cm(3)). The cranial segment was present in 39 of the 57 casts (68.42%). It presented the greatest median value of proportional area (50.00%) and also the greatest maximum value of proportional area, accounting for as much as 74.04% of the total kidney area. The ventral segment, which was found in 20 of the 57 casts (35.09%), presented the lowest median value of proportional area (13.87%) and showed the most variation in area (coefficient of variation 72.89%). There was no significant statistical difference between the segmental areas as evaluated by Cavalieri's principle and by the point-counting planimetry method. The distribution and size of the renal-arterial segments in pigs are not similar to those of the human kidneys. Therefore, this information must be taken into account by practitioners of urologic training or ablation using pigs as the animal model, as the structure of the porcine arterial segments cannot be transposed to humans.

  18. Divine proportion shape preservation and the fractal nature of cluster-cluster aggregates

    Science.gov (United States)

    Sorensen, C. M.; Oh, C.

    1998-12-01

    We present a restricted hierarchial model of cluster-cluster aggregation which allows for an analytical calculation of the fractal dimensions in excellent agreement with those found in Nature and simulations. We argue that this agreement is a consequence of the self-preserving cluster shape common to all models and Nature. This shape determines the fractal dimension and in our model is described by d-dimensional generalizations of the Fibonacci series and the divine proportion.

  19. Some simple approaches used in the construction of multiwire proportional chambers

    International Nuclear Information System (INIS)

    Staric, M.; Zavrtanik, D.; Kernel, G.; Ljubljana Univ.

    1983-01-01

    A simple method of manufacturing multiwire proportional chambers is described on an example of a 160 mmx160 mm chamber. Using a microscope the wires of anode planes are positioned to an accuracy of about 10 μm. Wire tensions are checked by comparing their natural frequencies to the notes of a musical instrument. A description of a drum-like device for foil stretching is also given. (orig.)

  20. The temperature dependence of the gas gain in sealed proportional counters

    International Nuclear Information System (INIS)

    Vanha-Honko, V.

    1980-01-01

    The temperature dependence of the gas gain in sealed proportional counters has been studied. It is found that the temperature coefficient of the gas gain can be explained by the thermal expansion of the counter materials. A simple model for the temperature coefficient, based on the Diethorn gas amplification formula, is presented. Abnormal temperature coefficients, attributed to impurities present in the counter gas, have been found in some individual counters. (orig.)

  1. Multiwire proportional counters for low-level 14C and 3H measurements

    International Nuclear Information System (INIS)

    Povinec, P.

    1978-01-01

    Two types of proportional counters for low-level counting of 14 C and 3 H are described. The 14 C counter is of the Oeschger type with copper foil used for separation of the inner and the ring counter. The 3 He counter is a new type of wall-less counter which does not use the internal cathode between the inner and the ring counter. Both counters have very low background and enable to reach a high counting sensitivity. (Auth.)

  2. Modelling and analysis of piezoelectric cantilever energy harvester for different proof mass and material proportion

    Science.gov (United States)

    Shashank, R.; Harisha, S. K., Dr; Abhishek, M. C.

    2018-02-01

    Energy harvesting using ambient energy sources is one of the fast growing trends in the world, research and development in the area of energy harvesting is moving progressively to get maximum power output from the existing resources. The ambient sources of energy available in the nature are solar energy, wind energy, thermal energy, vibrational energy etc. out of these methods energy harvesting by vibrational energy sources gain more importance due to its nature of not getting influenced by any environmental parameters and its free availability at anytime and anywhere. The project mainly deals with validating the values of voltage and electrical power output of experimentally conducted energy harvester, varying the parameters of the energy harvester and analyse the effect of the parameters on the performance of the energy harvester and compare the results. The cantilever beam was designed, analysed and simulated using COMSOL multi-physics software. The energy harvester gives an electrical output voltage of the 2.75 volts at a natural frequency of 37.2 Hz and an electrical power of 29μW. Decreasing the percentage of the piezoelectric material and simultaneously increasing the percentage of polymer material (so that total percentage of proportion remains same) increases the electrical voltage and decreases the natural frequency of the beam linearly upto 3.9V and 28.847 Hz till the percentage proportion of the beam was 24% piezoelectric beam and 76% polymer beam when the percentage proportion increased to 26% and 74% natural frequency goes on decreases further but voltage suddenly drops to 2.8V. The voltage generated by energy harvester increases proportionally and reaches 3.7V until weight of the proof mass reaches 4 grams and further increase in the weight of the proof mass decreases the voltage generated by energy harvester. Thus the investigation conveys that the weight of the proof mass and the length of the cantilever beam should be optimised to obtain maximum

  3. Systematic shifts of evaluated charge centroid for the cathode read-out multiwire proportional chamber

    International Nuclear Information System (INIS)

    Endo, I.; Kawamoto, T.; Mizuno, Y.; Ohsugi, T.; Taniguchi, T.; Takeshita, T.

    1981-01-01

    We have investigated the systematic error associtated with the charge centroid evaluation for the cathode read-out multiwire proportional chamber. Correction curves for the systematic error according to six centroid finding algorithms have been obtained by using the charge distribution calculated in a simple electrostatic mode. They have been experimentally examined and proved to be essential for the accurate determination of the irradiated position. (orig.)

  4. Motion Normalized Proportional Control for Improved Pattern Recognition-Based Myoelectric Control.

    Science.gov (United States)

    Scheme, Erik; Lock, Blair; Hargrove, Levi; Hill, Wendy; Kuruganti, Usha; Englehart, Kevin

    2014-01-01

    This paper describes two novel proportional control algorithms for use with pattern recognition-based myoelectric control. The systems were designed to provide automatic configuration of motion-specific gains and to normalize the control space to the user's usable dynamic range. Class-specific normalization parameters were calculated using data collected during classifier training and require no additional user action or configuration. The new control schemes were compared to the standard method of deriving proportional control using a one degree of freedom Fitts' law test for each of the wrist flexion/extension, wrist pronation/supination and hand close/open degrees of freedom. Performance was evaluated using the Fitts' law throughput value as well as more descriptive metrics including path efficiency, overshoot, stopping distance and completion rate. The proposed normalization methods significantly outperformed the incumbent method in every performance category for able bodied subjects (p < 0.001) and nearly every category for amputee subjects. Furthermore, one proposed method significantly outperformed both other methods in throughput (p < 0.0001), yielding 21% and 40% improvement over the incumbent method for amputee and able bodied subjects, respectively. The proposed control schemes represent a computationally simple method of fundamentally improving myoelectric control users' ability to elicit robust, and controlled, proportional velocity commands.

  5. Drawing area-proportional Euler diagrams representing up to three sets.

    Science.gov (United States)

    Rodgers, Peter; Stapleton, Gem; Flower, Jean; Howse, John

    2014-01-01

    Area-proportional Euler diagrams representing three sets are commonly used to visualize the results of medical experiments, business data, and information from other applications where statistical results are best shown using interlinking curves. Currently, there is no tool that will reliably visualize exact area-proportional diagrams for up to three sets. Limited success, in terms of diagram accuracy, has been achieved for a small number of cases, such as Venn-2 and Venn-3 where all intersections between the sets must be represented. Euler diagrams do not have to include all intersections and so permit the visualization of cases where some intersections have a zero value. This paper describes a general, implemented, method for visualizing all 40 Euler-3 diagrams in an area-proportional manner. We provide techniques for generating the curves with circles and convex polygons, analyze the drawability of data with these shapes, and give a mechanism for deciding whether such data can be drawn with circles. For the cases where nonconvex curves are necessary, our method draws an appropriate diagram using nonconvex polygons. Thus, we are now always able to automatically visualize data for up to three sets.

  6. System of two-coordinate cylindrical proportional chambers with resistive cathode

    International Nuclear Information System (INIS)

    Golubev, V.B.; Peryshkin, A.N.; Red'ko, I.Yu.; Serednyakov, S.I.

    1981-01-01

    A system of two-coordinate cylindrical proportional chambers is developed for experiments on studying the e + e - annihilation. The system consists of 6 independent proportional chambers of semicylindrical configuration with a gap between anode and cathode equal to 5 mm. The diameter of an external chnsamber equals 25 cm and its length cotitutes 40 cm. Anode wires 20 μm in-diameter are fixed in parallel to the system axis with a pitch of 2-3 mm. The use of a resisti ve cothode permitting to maintain the anode wires and delay circuits under the ground potential is one of the specific feabures of the given chamber. The resistive layer is produced by sputtering the aquadag aqueous suspension with the polyvinylacetate emulsion on a fibregrass-textolite. 8 delay circuits is mounted outside of each chamber from the side of the cathode. A functional flowsheet of a data readout system is given. The track angte is determined directiy according to the numbers of operated wires; coordinates along the axis are determined by means of the delay circuits placed outside the chamber near the resistive cathode. The accuracy of the coordinate measurement in both directions constitutes about 1 mm. Each chamber permits to measure the coordinates of several particles, if they entry into different delay circuits. The proportional chambers are filled with the mixture of Ar+30%CO 2 . Anode and cathode efficiencies in the plateau region (150-250) exceed 99%

  7. Unconscious context-specific proportion congruency effect in a stroop-like task.

    Science.gov (United States)

    Panadero, A; Castellanos, M C; Tudela, P

    2015-01-01

    Cognitive control is a central topic of interest in psychology and cognitive neuroscience and has traditionally been associated with consciousness. However, recent research suggests that cognitive control may be unconscious in character. The main purpose of our study was to further explore this area of research focusing on the possibly unconscious nature of the conflict adaptation effect, specifically the context-specific proportion congruency effect (CSPCE), by using a masked Stroop-like task where the proportion of congruency was associated to various masks. We used electrophysiological measures to analyze the neural correlates of the CSPCE. Results showed evidence of an unconscious CSPCE in reaction times (RTs) and the N2 and P3 components. In addition, the P2 component evoked by both target and masks indicated that the proportion of congruency was processed earlier than the congruency between the color word and the ink color of the target. Taken together, our results provided evidence pointing to an unconscious CSPCE. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition

    Directory of Open Access Journals (Sweden)

    Takahiro Morishita

    2017-07-01

    Full Text Available In cyclic multiaxial stress/strain condition under nonproportional loading in which principal direction of stress/strain are changed in a cycle, it becomes difficult to analyze stress/strain ranges because of complexity of multiaxial stress/strain states depending on time in cycles. In order to evaluate stress/strain simply and suitably under non-proportional loading, Itoh and Sakane have proposed a method called as IS-method and a strain parameter for life evaluation under non-proportional loading NP. In the method, 6-components of stress/strain are converted to an equivalent stress/strain indicating the amplitude and the direction of principal stress/strain as a function of time as well as an intensity of loading nonproportionality fNP. Based on IS-method, the authors also have developed a tool which enables to analyze multiaxial stress/strain condition with the nonproportionality of loading history and evaluate failure life under nonproportional multiaxial loading. The tool indicates the analyzed results on monitor and users can understand visually not only variation of the stress/strain conditions but also non-proportionality during the cycle, which helps the design of material strength.

  9. Application of orthogonal test method in mix proportion design of recycled lightweight aggregate concrete

    Science.gov (United States)

    Zhao, Zhanshan; An, Le; Zhang, Yijing; Yuan, Jie

    2017-03-01

    Recycled lightweight aggregate concrete was made with construction waste and ceramsite brick mainly including brick. Using the orthogonal test method, the mix proportion of recycled lightweight aggregate concrete was studied, and the Influence regularity and significance of water binder ratio, fly ash, sand ratio, the amount of recycled aggregate proportion on the compressive strength of concrete, the strong influence of mass ratio, slump expansion degree was studied. Through the mean and range analysis of the test results, the results show that the water binder ratio has the greatest influence on the 28d intensity of recycled lightweight aggregate concrete. Secondly, the fly ash content, the recycled aggregate replacement rate and the sand ratio have little influence. For the factors of expansion: the proportion of fly ash = water binder ratio sand >sand rate> recycled aggregate replacement rate. When the content of fly ash is about 30%, the expanded degree of recycled lightweight aggregate concrete is the highest, and the workability of that is better and the strength of concrete with 28d and 56d are the highest. When the content of brickbat is about 40% brick particles, the strength of concrete reaches the highest.

  10. Terminal attack trajectories of peregrine falcons are described by the proportional navigation guidance law of missiles.

    Science.gov (United States)

    Brighton, Caroline H; Thomas, Adrian L R; Taylor, Graham K

    2017-12-19

    The ability to intercept uncooperative targets is key to many diverse flight behaviors, from courtship to predation. Previous research has looked for simple geometric rules describing the attack trajectories of animals, but the underlying feedback laws have remained obscure. Here, we use GPS loggers and onboard video cameras to study peregrine falcons, Falco peregrinus , attacking stationary targets, maneuvering targets, and live prey. We show that the terminal attack trajectories of peregrines are not described by any simple geometric rule as previously claimed, and instead use system identification techniques to fit a phenomenological model of the dynamical system generating the observed trajectories. We find that these trajectories are best-and exceedingly well-modeled by the proportional navigation (PN) guidance law used by most guided missiles. Under this guidance law, turning is commanded at a rate proportional to the angular rate of the line-of-sight between the attacker and its target, with a constant of proportionality (i.e., feedback gain) called the navigation constant ( N ). Whereas most guided missiles use navigation constants falling on the interval 3 ≤ N ≤ 5, peregrine attack trajectories are best fitted by lower navigation constants (median N law could find use in small visually guided drones designed to remove other drones from protected airspace. Copyright © 2017 the Author(s). Published by PNAS.

  11. Slow-twitch fiber proportion in skeletal muscle correlates with insulin responsiveness.

    Science.gov (United States)

    Stuart, Charles A; McCurry, Melanie P; Marino, Anna; South, Mark A; Howell, Mary E A; Layne, Andrew S; Ramsey, Michael W; Stone, Michael H

    2013-05-01

    The metabolic syndrome, characterized by central obesity with dyslipidemia, hypertension, and hyperglycemia, identifies people at high risk for type 2 diabetes. Our objective was to determine how the insulin resistance of the metabolic syndrome is related to muscle fiber composition. Thirty-nine sedentary men and women (including 22 with the metabolic syndrome) had insulin responsiveness quantified using euglycemic clamps and underwent biopsies of the vastus lateralis muscle. Expression of insulin receptors, insulin receptor substrate-1, glucose transporter 4, and ATP synthase were quantified with immunoblots and immunohistochemistry. Participants were nondiabetic, metabolic syndrome volunteers and sedentary control subjects studied at an outpatient clinic. Insulin responsiveness during an insulin clamp and the fiber composition of a muscle biopsy specimen were evaluated. There were fewer type I fibers and more mixed (type IIa) fibers in metabolic syndrome subjects. Insulin responsiveness and maximal oxygen uptake correlated with the proportion of type I fibers. Insulin receptor, insulin receptor substrate-1, and glucose transporter 4 expression were not different in whole muscle but all were significantly less in the type I fibers of metabolic syndrome subjects when adjusted for fiber proportion and fiber size. Fat oxidation and muscle mitochondrial expression were not different in the metabolic syndrome subjects. Lower proportion of type I fibers in metabolic syndrome muscle correlated with the severity of insulin resistance. Even though whole muscle content was normal, key elements of insulin action were consistently less in type I muscle fibers, suggesting their distribution was important in mediating insulin effects.

  12. Discrimination of numerical proportions: A comparison of binomial and Gaussian models.

    Science.gov (United States)

    Raidvee, Aire; Lember, Jüri; Allik, Jüri

    2017-01-01

    Observers discriminated the numerical proportion of two sets of elements (N = 9, 13, 33, and 65) that differed either by color or orientation. According to the standard Thurstonian approach, the accuracy of proportion discrimination is determined by irreducible noise in the nervous system that stochastically transforms the number of presented visual elements onto a continuum of psychological states representing numerosity. As an alternative to this customary approach, we propose a Thurstonian-binomial model, which assumes discrete perceptual states, each of which is associated with a certain visual element. It is shown that the probability β with which each visual element can be noticed and registered by the perceptual system can explain data of numerical proportion discrimination at least as well as the continuous Thurstonian-Gaussian model, and better, if the greater parsimony of the Thurstonian-binomial model is taken into account using AIC model selection. We conclude that Gaussian and binomial models represent two different fundamental principles-internal noise vs. using only a fraction of available information-which are both plausible descriptions of visual perception.

  13. Confidence intervals for proportion difference from two independent partially validated series.

    Science.gov (United States)

    Qiu, Shi-Fang; Poon, Wai-Yin; Tang, Man-Lai

    2016-10-01

    Partially validated series are common when a gold-standard test is too expensive to be applied to all subjects, and hence a fallible device is used accordingly to measure the presence of a characteristic of interest. In this article, confidence interval construction for proportion difference between two independent partially validated series is studied. Ten confidence intervals based on the method of variance estimates recovery (MOVER) are proposed, with each using the confidence limits for the two independent binomial proportions obtained by the asymptotic, Logit-transformation, Agresti-Coull and Bayesian methods. The performances of the proposed confidence intervals and three likelihood-based intervals available in the literature are compared with respect to the empirical coverage probability, confidence width and ratio of mesial non-coverage to non-coverage probability. Our empirical results show that (1) all confidence intervals exhibit good performance in large samples; (2) confidence intervals based on MOVER combining the confidence limits for binomial proportions based on Wilson, Agresti-Coull, Logit-transformation, Bayesian (with three priors) methods perform satisfactorily from small to large samples, and hence can be recommended for practical applications. Two real data sets are analysed to illustrate the proposed methods. © The Author(s) 2014.

  14. An array of low-background 3He proportional counters for theSudbury Neutrino Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Amsbaugh, J.F.; Anaya, J.M.; Banar, J.; Bowles, T.J.; Browne,M.C.; Bullard, T.V.; Burritt, T.H.; Cox-Mobrand, G.A.; Dai, X.; H.Deng,X.; Di Marco, M.; Doe, P.J.; Dragowsky, M.R.; Duba, C.A.; Duncan, F.A.; Earle, E.D.; Elliott, S.R.; Esch, E.-I.; Fergani, H.; Formaggio, J.A.; Fowler, M.M.; Franklin, J.E.; Geissbuehler, P.; Germani, J.V.; Goldschmidt, A.; Guillian, E.; Hallin, A.L.; Harper, G.; Harvey, P.J.; Hazama, R.; Heeger, K.M.; Heise, J.; Hime, A.; Howe, M.A.; Huang, M.; Kormos, L.L.; Kraus, C.; Krauss, C.B.; Law, J.; Lawson, I.T.; Lesko,K.T.; Loach, J.C.; Majerus, S.; Manor, J.; McGee, S.; Miknaitis, K.K.S.; Miller, G.G.; Morissette, B.; Myers, A.; Oblath, N.S.; O' Kee, H.M.; Ollerhead, R.W.; Peeters, S.J.M.; Poon, A.W.P.; Prior, G.; Reitzner,S.D.; Rielage, K.; Robertson, R.G.H.; Skensved, P.; Smith, A.R.; Smith,M.W.E.; Steiger, T.D.; Stonehill,L.C.; Thornewell, P.M.; Tolich, N.; VanDevender, B.A.; VanWechel, T.D.; Wall, B.L.; Tseung, H.W.C.; Wendland,J.; West, N.; Wilhelmy, J.B.; Wilkerson, J.F.; Wouters, J.M.

    2007-02-01

    An array of Neutral-Current Detectors (NCDs) has been builtin order to make a unique measurement of the total active ux of solarneutrinos in the Sudbury Neutrino Observatory (SNO). Data in the thirdphase of the SNO experiment were collected between November 2004 andNovember 2006, after the NCD array was added to improve theneutral-current sensitivity of the SNO detector. This array consisted of36 strings of proportional counters lled with a mixture of 3He and CF4gas capable of detecting the neutrons liberated by the neutrino-deuteronneutral current reaction in the D2O, and four strings lled with a mixtureof 4He and CF4 gas for background measurements. The proportional counterdiameter is 5 cm. The total deployed array length was 398 m. The SNO NCDarray is the lowest-radioactivity large array of proportional countersever produced. This article describes the design, construction,deployment, and characterization of the NCD array, discusses theelectronics and data acquisition system, and considers event signaturesand backgrounds.

  15. Pedal proportions of Poposaurus gracilis: convergence and divergence in the feet of archosaurs.

    Science.gov (United States)

    Farlow, James O; Schachner, Emma R; Sarrazin, John Cody; Klein, Hendrik; Currie, Philip J

    2014-06-01

    The crocodile-line basal suchian Poposaurus gracilis had body proportions suggesting that it was an erect, bipedal form like many dinosaurs, prompting questions of whether its pedal proportions, and the shape of its footprint, would likewise "mimic" those of bipedal dinosaurs. We addressed these questions through a comparison of phalangeal, digital, and metatarsal proportions of Poposaurus with those of extinct and extant crocodile-line archosaurs, obligate or facultatively bipedal non-avian dinosaurs, and ground birds of several clades, as well as a comparison of the footprint reconstructed from the foot skeleton of Poposaurus with known early Mesozoic archosaurian ichnotaxa. Bivariate and multivariate analyses of phalangeal and digital dimensions showed numerous instances of convergence in pedal morphology among disparate archosaurian clades. Overall, the foot of Poposaurus is indeed more like that of bipedal dinosaurs than other archosaur groups, but is not exactly like the foot of any particular bipedal dinosaur clade. Poposaurus likely had a digitigrade stance, and its footprint shape could have resembled grallatorid ichnotaxa, unless digit I of the foot of Poposaurus commonly left an impression. Copyright © 2014 Wiley Periodicals, Inc.

  16. Proportional and functional analogical reasoning in normal and language-impaired children.

    Science.gov (United States)

    Nippold, M A; Erskine, B J; Freed, D B

    1988-11-01

    Teachers often use analogies in classroom settings to clarify new concepts for their students. However, analogies may inadvertently confuse the youngster who has difficulty identifying the one-to-one comparisons underlying them. Although analogical reasoning has been studied extensively in normal children, no information was available concerning this construct in children having a specific language impairment. Thus, it was unknown to what extent they might be deficient in analogical reasoning. Therefore, in the present study, 20 children ages 6-8 years (mean age = 7:6) having normal nonverbal intelligence but deficits in language comprehension were administered tasks of verbal and perceptual proportional analogical reasoning and a problem-solving task of functional analogical reasoning. Compared to a normal-language control group matched on the basis of chronological age and sex, the language-impaired group was deficient in all three tasks of analogical reasoning. However, when the factor of nonverbal intelligence was controlled statistically, the differences between the groups on each of the tasks were removed. Additional findings were that verbal proportional analogical reasoning was significantly correlated to perceptual proportional analogical reasoning and to functional analogical reasoning. Implications for assessment and intervention with young school-age language-impaired children are discussed.

  17. Go-stimuli proportion influences response strategy in a sustained attention to response task.

    Science.gov (United States)

    Wilson, Kyle M; Finkbeiner, Kristin M; de Joux, Neil R; Russell, Paul N; Helton, William S

    2016-10-01

    The sustained attention to response task (SART) usefulness as a measure of sustained attention has been questioned. The SART may instead be a better measure of other psychological processes and could prove useful in understanding some real-world behaviours. Thirty participants completed four Go/No-Go response tasks much like the SART, with Go-stimuli proportions of .50, .65, .80 and .95. As Go-stimuli proportion increased, reaction times decreased while both commission errors and self-reported task-related thoughts increased. Performance measures were associated with task-related thoughts but not task-unrelated thoughts. Instead of faster reaction times and increased commission errors being due to absentmindedness or perceptual decoupling from the task, the results suggested participants made use of two competing response strategies, in line with a response strategy or response inhibition perspective of SART performance. Interestingly, performance measures changed in a nonlinear manner, despite the linear Go proportion increase. A threshold may exist where the prepotent motor response becomes more pronounced, leading to the disproportionate increase in response speed and commission errors. This research has implications for researchers looking to employ the SART and for more applied contexts where the consequences of response inhibition failures can be serious.

  18. An array of low-background {sup 3}He proportional counters for the Sudbury Neutrino Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Amsbaugh, J.F. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Anaya, J.M.; Banar, J.; Bowles, T.J. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Browne, M.C.; Bullard, T.V.; Burritt, T.H.; Cox-Mobrand, G.A. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Dai, X. [Department of Physics, University of Oxford, Oxford, OX1 3RH (United Kingdom); Deng, H. [Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, PA 19104 (United States); Di Marco, M. [Department of Physics, Queen' s University, Kingston, Ont., Canada K7L 3N6 (Canada); Doe, P.J. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Dragowsky, M.R. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Duba, C.A. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Duncan, F.A.; Earle, E.D. [Department of Physics, Queen' s University, Kingston, Ont., Canada K7L 3N6 (Canada); Elliott, S.R. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Esch, E.-I. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Fergani, H. [Department of Physics, University of Oxford, Oxford, OX1 3RH (United Kingdom); Formaggio, J.A. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States)] (and others)

    2007-09-11

    An array of Neutral-Current Detectors (NCDs) has been built in order to make a unique measurement of the total active flux of solar neutrinos in the Sudbury Neutrino Observatory (SNO). Data in the third phase of the SNO experiment were collected between November 2004 and 2006, after the NCD array was added to improve the neutral-current sensitivity of the SNO detector. This array consisted of 36 strings of proportional counters filled with a mixture of {sup 3}He and CF{sub 4} gas capable of detecting the neutrons liberated by the neutrino-deuteron neutral-current reaction in the D{sub 2}O, and four strings filled with a mixture of {sup 4}He and CF{sub 4} gas for background measurements. The proportional counter diameter is 5 cm. The total deployed array length was 398 m. The SNO NCD array is the lowest-radioactivity large array of proportional counters ever produced. This article describes the design, construction, deployment, and characterization of the NCD array, discusses the electronics and data acquisition system, and considers event signatures and backgrounds.

  19. The equivalence of two phylogenetic biodiversity measures: the Shapley value and Fair Proportion index.

    Science.gov (United States)

    Hartmann, Klaas

    2013-11-01

    Most biodiversity conservation programs are forced to prioritise species in order to allocate their funding. This paper contains a mathematical proof that provides biological support for one common approach based on phylogenetic indices. Phylogenetic trees describe the evolutionary relationships between a group of taxa. Two indices for computing the distinctiveness of each taxon in a phylogenetic tree are considered here-the Shapley value and the Fair Proportion index. These indices provide a measure of the importance of each taxon for overall biodiversity and have been used to prioritise taxa for conservation. The Shapley value is the biodiversity contribution a taxon is expected to make if all taxa are equally likely to become extinct. This interpretation makes it appealing to use the Shapley value in biodiversity conservation applications. The Fair Proportion index lacks a convenient interpretation, however it is significantly easier to calculate and understand. It has been empirically observed that there is a high correlation between the two indices. This paper shows the mathematical basis for this correlation and proves that as the number of taxa increases, the indices become equivalent. Consequently in biodiversity prioritisation the simpler Fair Proportion index can be used whilst retaining the appealing interpretation of the Shapley value.

  20. Effect of Alkaline Solution with Varying Mix Proportion on Geopolymer Mortar

    Science.gov (United States)

    Karuppuchamy, K.; Ananthkumar, M.; Raghavapriya, S. M.

    2018-02-01

    Cement production is attributed by emission of carbon dioxide which causes severe environmental impacts. This has led to the invention of special construction materials which can replace cement. On the other hand, these construction materials (like Fly ash, Metakaolin) also need to be inexpensive and should possess all the characteristics of cementitious materials. In this project, the effect of geopolymerization on the properties of the end product were studied with varying distillation of NaOH solution (10M, 12M and 15M) for different mix proportion (1:1, 1:2 and 1:3). Curing was done for 1 day at a temperature of 60°C and 80°C respectively. The densities, compressive strength, alkalinity, co-efficient of absorption were determined. As a result, the experiments showed the effect of factors such as mix proportion, curing temperature and curing day on the physical and mechanical properties such as mix proportion of the geopolymer concrete. Results of NaOH concentration of 12M concentration cured for 24 hours at 80°C and 60°C showed better mechanical performance than the rest of the concentrations.

  1. Proportioning of Lightweight Concrete by the Inclusions of Expanded Polystyrene Beads (EPS and Foam Agent

    Directory of Open Access Journals (Sweden)

    Eethar Thanon Dawood

    2016-10-01

    Full Text Available This paper illustrates the performance of lightweight concrete using various amounts of expanded polystyrene beads (EPS and different amounts of foam agent to produce lightweight concrete. The objective of this paper is to produce lightweight concrete with good workability and strength, by different mix proportion of foam agent (0.4, 0.6, 0.8, 1, 1.2 kg/m3 and varying water cement ratio (w/c depending on the flow. Besides, various proportions using different percentages of EPS in order of volume fractions are used. The flow range used in the study is 110-130%. Each mix proportion is tested for compressive strength, modulus of rupture, density and voids ratio. The results gives acceptable ranges of strength for lightweight concrete produced by the inclusions of EPS beads and foam concrete. Therefore, the lightweight concrete produced in this work can be used for structural applications like multistory building frames, floors, bridges and prestressed or precast elements. 

  2. A synchrotron X-ray diffraction study of non-proportional strain-path effects

    International Nuclear Information System (INIS)

    Collins, D.M.; Erinosho, T.; Dunne, F.P.E.; Todd, R.I.; Connolley, T.; Mostafavi, M.; Kupfer, H.; Wilkinson, A.J.

    2017-01-01

    Common alloys used in sheet form can display a significant ductility benefit when they are subjected to certain multiaxial strain paths. This effect has been studied here for a polycrystalline ferritic steel using a combination of Nakajima bulge testing, X-ray diffraction during biaxial testing of cruciform samples and crystal plasticity finite element (CPFE) modelling. Greatest gains in strain to failure were found when subjecting sheets to uniaxial loading followed by balanced biaxial deformation, resulting in a total deformation close to plane-strain. A combined strain of approximately double that of proportional loading was achieved. The evolution of macrostrain, microstrain and texture during non-proportional loading were evaluated by in-situ high energy synchrotron diffraction. The results have demonstrated that the inhomogeneous strain accumulation from non-proportional deformation is strongly dependent on texture and the applied strain-ratio of the first deformation pass. Experimental diffraction evidence is supported by results produced by a novel method of CPFE-derived diffraction simulation. Using constitutive laws selected on the basis of good agreement with measured lattice strain development, the CPFE model demonstrated the capability to replicate ductility gains measured experimentally.

  3. Single wire drift chamber design

    Energy Technology Data Exchange (ETDEWEB)

    Krider, J.

    1987-03-30

    This report summarizes the design and prototype tests of single wire drift chambers to be used in Fermilab test beam lines. The goal is to build simple, reliable detectors which require a minimum of electronics. Spatial resolution should match the 300 ..mu..m rms resolution of the 1 mm proportional chambers that they will replace. The detectors will be used in beams with particle rates up to 20 KHz. Single track efficiency should be at least 99%. The first application will be in the MT beamline, which has been designed for calibration of CDF detectors. A set of four x-y modules will be used to track and measure the momentum of beam particles.

  4. [The association between lifestyle and body proportion in primary school children].

    Science.gov (United States)

    Ohsuka, Keiko

    2013-03-01

    To investigate the association between lifestyle and body proportion in children. The subjects were 499 students at "B" primary school, located in "A" prefecture. Data were obtained by analyzing the results of routine health checkups carried out in the fiscal year 2007 by using self-reported questionnaires on lifestyle. For the analysis of body proportion, the degree of obesity (overweight degree) divided by sex, age, and body height was calculated using a standard weight-based criterion; values greater than +20% indicated an inclination toward obesity, and values smaller than -20% indicated a tendency toward underweight. To analyze the relation between body proportion and lifestyle, binomial logistic regression analysis was performed using body proportion ("normal group" and "obesity inclination/underweight group") as the dependent variable and lifestyle as the independent variable. In addition, lifestyle factors common to and unrelated to both the obesity-inclined and the underweight groups were examined. Comparison between the incidences of children with an inclination toward either obesity or underweight with national averages in the same fiscal year revealed that the overall inclination toward obesity was high in boys. Among other factors, influence by lifestyle habits such as insufficient chewing and the habit of watching TV for long periods was suggested. The incidence of children tending toward underweight or obesity was high among boys in the fourth and fifth grades and in girls in the fifth grade. Logistic regression analysis showed that the occurrence of unhealthy lifestyle habits such as "insufficient chewing" (2.1 times the number of those who chew well; P = 0.016) and "TV watching for more than 2 hours per day" (1.9 times the number of those who do not watch TV for more than 2 hours per day; P = 0.071) were highly correlated with the incidence of underweight or obesity. In addition, when we categorized the relationship between lifestyle and body

  5. Calculations of the response functions of Bonner spheres with a spherical 3He proportional counter using a realistic detector model

    International Nuclear Information System (INIS)

    Wiegel, B.; Alevra, A.V.; Siebert, B.R.L.

    1994-11-01

    A realistic geometry model of a Bonner sphere system with a spherical 3 He-filled proportional counter and 12 polyethylene moderating spheres with diameters ranging from 7,62 cm (3'') to 45,72 cm (18'') is introduced. The MCNP Monte Carlo computer code is used to calculate the responses of this Bonner sphere system to monoenergetic neutrons in the energy range between 1 meV to 20 MeV. The relative uncertainties of the responses due to the Monte Carlo calculations are less than 1% for spheres up to 30,48 cm (12'') in diameter and less than 2% for the 15'' and 18'' spheres. Resonances in the carbon cross section are seen as significant structures in the response functions. Additional calculations were made to study the influence of the 3 He number density and the polyethylene mass density on the response as well as the angular dependence of the Bonner sphere system. The calculated responses can be adjusted to a large set of calibration measurements with only a single fit factor common to all sphere diameters and energies. (orig.) [de

  6. Proportion of adults fasting for lipid testing relative to guideline changes in Alberta.

    Science.gov (United States)

    Ma, Irene; Viczko, Jeannine; Naugler, Christopher

    2017-04-01

    Guidelines have historically recommended measuring lipid profile tests in a fasting state. However, in April 2011 and 2014, the Canadian city of Calgary and its province of Alberta, respectively, have changed their lipid guidelines to allow testing for individuals in any fasting state; several years prior to the release of the 2016 Canadian Cardiovascular Society and Hypertension Canada guidelines. The purpose of this study was to document the proportion of individuals in Calgary who fasted for a lipid encounter in relation to the change in various guidelines and policies. Counts were collected each month per gender from January 1, 2010 to June 30, 2016 for community-based adults ≥18years old who fasted (≥8h) or did not fast (fasting state. The proportion of adults who fasted declined from 98.59%±0.379% (mean±SD) in 2010 to 41.65%±1.295% (mean±SD) in 2016. However, a marked decline in the proportion of adults fasting for a lipid encounter was not observed until February 2015, which coincided with the release of Alberta's Toward Optimized Practice Clinical Practice Guidelines. This documentation of individuals fasting for a lipid encounter may assist other jurisdictions in Canada with the new nonfasting lipid guideline changes. We recommend releasing provincial clinical practice guidelines, in addition to laboratory bulletins and continuing medical education presentations, regarding the new nonfasting lipid recommendations in other jurisdictions to ensure community patients are aware of this change. Copyright © 2016 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  7. Sliding spool design for reducing the actuation forces in direct operated proportional directional valves: Experimental validation

    International Nuclear Information System (INIS)

    Amirante, Riccardo; Distaso, Elia; Tamburrano, Paolo

    2016-01-01

    Highlights: • An innovative procedure to design a commercial proportional directional valve is shown. • Experimental tests are performed to demonstrate the flow force reduction. • The design is improved by means of a previously made optimization procedure. • Great reduction in the flow forces without reducing the flow rate is demonstrated. - Abstract: This paper presents the experimental validation of a new methodology for the design of the spool surfaces of four way three position direct operated proportional directional valves. The proposed methodology is based on the re-design of both the compensation profile (the central conical surface of the spool) and the lateral surfaces of the spool, in order to reduce the flow forces acting on the spool and hence the actuation forces. The aim of this work is to extend the application range of these valves to higher values of pressure and flow rate, thus avoiding the employment of more expensive two stage configurations in the case of high-pressure conditions and/or flow rate. The paper first presents a theoretical approach and a general strategy for the sliding spool design to be applied to any four way three position direct operated proportional directional valve. Then, the proposed approach is experimentally validated on a commercially available valve using a hydraulic circuit capable of measuring the flow rate as well as the actuation force over the entire spool stroke. The experimental results, performed using both the electronic driver provided by the manufacturer and a manual actuation system, show that the novel spool surface requires remarkably lower actuation forces compared to the commercial configuration, while maintaining the same flow rate trend as a function of the spool position.

  8. Channel selection for simultaneous and proportional myoelectric prosthesis control of multiple degrees-of-freedom

    Science.gov (United States)

    Hwang, Han-Jeong; Hahne, Janne Mathias; Müller, Klaus-Robert

    2014-10-01

    Objective. Recent studies have shown the possibility of simultaneous and proportional control of electrically powered upper-limb prostheses, but there has been little investigation on optimal channel selection. The objective of this study is to find a robust channel selection method and the channel subsets most suitable for simultaneous and proportional myoelectric prosthesis control of multiple degrees-of-freedom (DoFs). Approach. Ten able-bodied subjects and one person with congenital upper-limb deficiency took part in this study, and performed wrist movements with various combinations of two DoFs (flexion/extension and radial/ulnar deviation). During the experiment, high density electromyographic (EMG) signals and the actual wrist angles were recorded with an 8 × 24 electrode array and a motion tracking system, respectively. The wrist angles were estimated from EMG features with ridge regression using the subsets of channels chosen by three different channel selection methods: (1) least absolute shrinkage and selection operator (LASSO), (2) sequential feature selection (SFS), and (3) uniform selection (UNI). Main results. SFS generally showed higher estimation accuracy than LASSO and UNI, but LASSO always outperformed SFS in terms of robustness, such as noise addition, channel shift and training data reduction. It was also confirmed that about 95% of the original performance obtained using all channels can be retained with only 12 bipolar channels individually selected by LASSO and SFS. Significance. From the analysis results, it can be concluded that LASSO is a promising channel selection method for accurate simultaneous and proportional prosthesis control. We expect that our results will provide a useful guideline to select optimal channel subsets when developing clinical myoelectric prosthesis control systems based on continuous movements with multiple DoFs.

  9. Absolute determination of radiation bursts and of proportional counters space charge effect through the influence method

    International Nuclear Information System (INIS)

    Rios, I.J.; Mayer, R.E.

    2016-01-01

    When proportional counters are employed in charge integration mode to determine the magnitude of a radiation pulse, so intense that individual detection events take place in a time too short to produce individual output pulses, mostly in pulsed neutron sources, the strong build-up of positive space charge reduces the electric multiplication factor of the proportional detector. Under such conditions the ensuing measurement underestimates the amount of radiation that interacted with the detector. If the geometric characteristics, the filling gas pressure and the voltage applied to that detector are known, it becomes possible to apply an analytical correction method to the measurement. In this article we present a method that allows to determine the absolute value of the detected radiation burst without the need to know the characteristics of the employed detectors. It is necessary to employ more than one detector, taking advantage of the Influence Method. The “Influence Method” is conceived for the absolute determination of a nuclear particle flux in the absence of known detector efficiency and without the need to register coincidences of any kind. This method exploits the influence of the presence of one detector in the count rate of another detector, when they are placed one behind the other and define statistical estimators for the absolute number of incident particles and for the efficiency (Rios and Mayer, 2015 [1,2]). Its practical implementation in the measurement of a moderated neutron flux arising from an isotopic neutron source was exemplified in (Rios and Mayer, 2016 [3]) and the extension for multiple detectors in (Rios and Mayer 2016 [4]). - Highlights: • Absolute determination of radiation burst. • Proportional counters space charge effect. • Radiation measurements on pulsed devices.

  10. Factors in the development of proportional reasoning strategies by concrete operational college students

    Science.gov (United States)

    Roth, Wolff-Michael; Milkent, Marlene M.

    This study was designed as a test for two neo-Piagetian theories. More specifically, this research examined the relationships between the development of proportional reasoning strategies and three cognitive variables from Pascual-Leone's and Case's neo-Piagetian theories. A priori hypotheses linked the number of problems students worked until they induced a proportional reasoning strategy to the variables of M-space, degree of field dependence, and short-term storage space. The subjects consisted of students enrolled in Physical Science I, a science course for nonscience majors at the University of Southern Mississippi. Of the 34 subjects in the study, 23 were classified as concrete operational on the basis of eight ratio tasks. Problems corresponding to five developmental levels of proportional reasoning (according to Piagetian and neo-Piagetian theory), were presented by a microcomputer to the 23 subjects who had been classified as concrete operational. After a maximum of 6 hours of treatment, 17 of the 23 subjects had induced ratio schemata at the upper formal level (IIIB), while the remaining subjects used lower formal level (IIIA) schemata. The data analyses showed that neither M-space and degree of field-dependence, either alone or in combination, nor short-term storage predicted the number of problems students need to do until they induce an appropriate problem-solving strategy. However, there were significant differences in the short-term storage space of those subjects who mastered ratio problems at the highest level and those who did not. Also, the subjects' degree of field-dependence was not a predictor of either the ability to transfer problem-solving strategies to a new setting or the reuse of inappropriate strategies. The results of this study also suggest that short-term storage space is a variable with high correlations to a number of aspects of learning such as transfer and choice of strategy after feedback.

  11. Quantitative determination of the proportion of microtubule polymer present during the mitosis-interphase transition.

    Science.gov (United States)

    Zhai, Y; Borisy, G G

    1994-04-01

    We have developed a new method for determining levels of tubulin polymer, based on quantitative fluorescence detection of x-rhodamine tubulin microinjected into living cells and we have applied this method to analysis of the mitosis-interphase transition. LLC-PK cells in interphase and mitosis were microinjected, then cooled and rewarmed to drive tubulin incorporation. Total tubulin fluorescence in individual, living cells was quantified using a cooled, scientific grade CCD image sensor. Cells were then washed and lysed into a microtubule-stabilizing buffer to extract the soluble pool. Total tubulin polymer fluorescence was determined for the extracted cells in the same way as for living cells. Fluorescence images were corrected by flat-fielding and background subtraction. The ratio of extracted cell fluorescence/living cell fluorescence for individual cells, was taken as the proportion of tubulin as polymer. Cells in M-phase, G1 and random interphase were analyzed. G1 cells had almost the same proportion as random interphase cells. Mitotic cells gave a value of 90 +/- 5% of G1 cells at 37 degrees C. Within M-phase, levels of tubulin as polymer in metaphase and early anaphase were not significantly different. In contrast to the general expectation of microtubule depolymerization at anaphase onset, these results indicate that as cells exit mitosis, the overall proportion of tubulin as polymer does not change dramatically even though the mitotic spindle disassembles. We conclude that the mitosis-interphase transition is accompanied by a redistribution of tubulin at an essentially constant polymer level. Therefore, a global shift to depolymerization conditions is not the driving force for anaphase chromosome movement.

  12. Analysis of maxillary anterior teeth proportion in relationship with lower facial height and malocclusion

    Directory of Open Access Journals (Sweden)

    Rajesh Gyawali

    2017-07-01

    Full Text Available Background & Objectives: Maxillary anterior tooth to tooth proportion has a special value in dental esthetics. This study aimed to assess the apparent proportion of maxillary anteriors and possible association with lower anterior facial height and malocclusion type. Materials & Methods: One-hundred and sixty samples with well aligned maxillary dentition were selected and the lower anterior facial height was measured with digital caliper. Molar relationship was examined and intraoral frontal photograph was taken for digital measurement of tooth proportion. The ratio of maxillary canine to lateral and lateral to central incisors were measured and compared between gender and the sides. These ratios were further compared among various malocclusion type using ANOVA and its association with lower anterior facial height was evaluated with Pearson’s correlation.Results: Most of the samples had Class I molar relationship (70% followed by Class II (23% and Class III (7%. The mean lower anterior facial height was 62.82mm and ratio of maxillary lateral to central incisor and canine to lateral incisor was 0.68 and 0.76 respectively. No statistically significant difference was found when the ratio was compared between the gender and the sides. These ratios were statistically different from the golden ratio and has no significant correlation with lower anterior facial height. These mean ratios were also found similar across the malocclusion type.Conclusion: Ratio of apparent dimension of maxillary canine to lateral incisor and lateral to central incisor was different from the golden ratio and showed no association with lower anterior facial height and malocclusion type.

  13. DNA Methylation Patterns in Cord Blood of Neonates Across Gestational Age: Association With Cell-Type Proportions.

    Science.gov (United States)

    Braid, Susan M; Okrah, Kwame; Shetty, Amol; Corrada Bravo, Hector

    A statistical methodology is available to estimate the proportion of cell types (cellular heterogeneity) in adult whole blood specimens used in epigenome-wide association studies (EWAS). However, there is no methodology to estimate the proportion of cell types in umbilical cord blood (also a heterogeneous tissue) used in EWAS. The objectives of this study were to determine whether differences in DNA methylation (DNAm) patterns in umbilical cord blood are the result of blood cell type proportion changes that typically occur across gestational age and to demonstrate the effect of cell type proportion confounding by comparing preterm infants exposed and not exposed to antenatal steroids. We obtained DNAm profiles of cord blood using the Illumina HumanMethylation27k BeadChip array for 385 neonates from the Boston Birth Cohort. We estimated cell type proportions for six cell types using the deconvolution method developed by . The cell type proportion estimates segregated into two groups that were significantly different by gestational age, indicating that gestational age was associated with cell type proportion. Among infants exposed to antenatal steroids, the number of differentially methylated CpGs dropped from 127 to 1 after controlling for cell type proportion. EWAS utilizing cord blood are confounded by cell type proportion. Careful study design including correction for cell type proportion and interpretation of results of EWAS using cord blood are critical.

  14. Determination of optimum shape and dimensions of anode high-voltage isolators for gaseous proportional counters

    International Nuclear Information System (INIS)

    Jelen, K.; Jagusztyn, W.

    1975-01-01

    The influence of the shape and dimensions of the high-voltage anode-to-cathods isolator on the regularity of the electrostatic field distribution along the anode of a cylindrical gaseous proportional counter is studied. For a counter of fixed dimensions, the length and diameter of the glass isolators were optimized to disrupt as little as possible the regularity of the field distribution in the active volume of the counter. Results of calculations are in agreement with experimental data. The obtained results provide a basis for obtaining a correct ratio of the active volume of the counter to its total volume. (author)

  15. Measurement of the extracted electron beam profile by means of a proportional chamber

    International Nuclear Information System (INIS)

    Arakelyan, E.A.; Bayatyan, G.L.; Vartanyan, G.S.; Grigoryan, N.K.; Kechechyan, A.D.; Marikyan, G.G.

    1982-01-01

    The description is given of a system for charged particles beam profile measurement used for the extracted electron beam monitoring at the Erevan synchrotron. The system is based on a proportional chamber with dimensions of 128x128 mm and 2 mm spacing of signal wires. The coordinate is determined by the interwire delay method. The microelectronic cells are used as delay elements. The information is extracted for the amplitude analysis. The load of the system has been as high as 2x10 4 c -1 per wire

  16. Organizing of delay, input gate and memory of proportional chamber channel basing on D-trigger

    International Nuclear Information System (INIS)

    Vladimirov, S.V.; Kuzichev, V.F.; Rabin, N.V.

    1980-01-01

    Economical organization of delay, input gate and proportional chamber (PC) channel memory on the 155 TM2 D trigger basis is described. The channel consists of an amplifier; delay element permitting to synchronize PC signal and recording strobe-signal; input gate, where coincidence of the above signals occurs; memory element, where the data from a wire are recorded and stored; read gate through which the data are transmitted for further processing. Presented is one of the versions of circuit solution for delay element, input gate and momory element. Flowsheet peculiarity is the simplicity of fabrication and tuning as well as low cost of the device

  17. Distorting reality for children: body size proportions of Barbie and Ken dolls.

    Science.gov (United States)

    Brownell, K D; Napolitano, M A

    1995-11-01

    Using hip measurements as a constant, calculations were made to determine the changes necessary for a young, healthy adult woman and man to attain the same body proportions as Barbie and Ken dolls, respectively. Among the changes necessary were for the female to increase 24 in. in height, 5 in. in the chest, and 3.2 in. in neck length, while decreasing 6 in. in the waist, and for the male to increase 20 in. in height, 11 in. in the chest, and 7.9 in. in neck circumference. Like adults, children are exposed to highly unrealistic ideals for shape and weight.

  18. Proportional counter device for detecting electronegative species in an air sample

    Science.gov (United States)

    Allman, S.L.; Chen, F.C.; Chen, C.H.

    1994-03-08

    Apparatus for detecting an electronegative species comprises an analysis chamber, an inlet communicating with the analysis chamber for admitting a sample containing the electronegative species and an ionizable component, a radioactive source within the analysis chamber for emitting radioactive energy for ionizing a component of the sample, a proportional electron detector within the analysis chamber for detecting electrons emitted from the ionized component, and a circuit for measuring the electrons and determining the presence of the electronegative species by detecting a reduction in the number of available electrons due to capture of electrons by the electronegative species. 2 figures.

  19. Use of tissue equivalent proportional counters to characterize radiation quality on the space shuttle

    International Nuclear Information System (INIS)

    Braby, L.A.; Conroy, T.J.; Elegy, D.C.; Brackenbush, L.W.

    1992-04-01

    Tissue equivalent proportional counters (TEPC) are essentially cavity ionization chambers operating at low pressure and with gas gain. A small, battery powered, TEPC spectrometer, which records lineal energy spectra at one minute intervals, has been used on several space shuttle missions. The data it has collected clearly show the South Atlantic anomaly and indicate a mean quality factor somewhat higher than expected. An improved type of instrument has been developed with sufficient memory to record spectra at 10 second intervals, and with increased resolution for low LET events. This type of instrument will be used on most future space shuttle flights and in some international experiments

  20. Set-up of proportional counter L2 for 14C measurements with improved precision

    International Nuclear Information System (INIS)

    Goslar, T.; Pazdur, A.; Pazdur, M.F.; Walanus, A.; Zastawny, A.

    1990-01-01

    Radiocarbon dating with improved precision denotes determination of conventional radiocarbon dates with accuracy equal to ca ± 25 yr. The paper presents some fundamental data concerning construction and design of the proportional counter L2, the results of calibration of the counter, including detailed information on changes of the background counting rate. The counter L2 enables dating of samples up to 50 000 yr. For samples younger than 3000 yr the error of dating is equal to ca ± 25 yr. 4 figs., 1 tab., 9 refs. (author)

  1. Using Invention Tasks to Promote Sense-making an Proportional Reasoning

    Science.gov (United States)

    Boudreaux, Andrew; Kanim, Stephen; Brahmia, Suzanne; Richards, Aj; Smith, Josh

    2012-02-01

    Dan Schwartz and colleagues have developed invention instruction as a means to prepare students for future learning. Invention tasks present students with open-ended situations in which they must invent a procedure or quantity in order to make meaningful comparisons. Through creative thinking and struggle, students become primed to make sense of the accepted scientific solution. A collaboration between Rutgers, WWU, and NMSU has developed sequences of invention tasks designed to promote proportional reasoning, a set of skills emphasized in math and science education in primary through undergraduate levels. This workshop will engage participants in invention work and discuss classroom applications.

  2. Robust Power Control for Cognitive Radio Networks with Proportional Rate Fairness

    Directory of Open Access Journals (Sweden)

    Yanyan Shen

    2015-06-01

    Full Text Available This paper studies the power control problem in cognitive radio networks where a primary user and multiple secondary users (SUs coexist. Imperfect channel state information is considered. The objective is to maximize the SUs' sum rate while guaranteeing the proportional rate fairness among SUs. The problem under consideration is non-convex. By doing a transformation, it is equivalently changed to a second-order cone programming problem, which can be efficiently solved by existing standard methods. Simulations have been done to verify the network performance under different channel uncertainty conditions.

  3. Quadrotor Proportional-Derivative Regulation for Nonzero Set Point on SO(3) with Disturbance Compensation

    Science.gov (United States)

    Herdjunanto, S.; Sandiwan, A. P.; Cahyadi, A. I.

    2017-04-01

    Disturbance compensation is a challenging problem in quadrotor control, especially in nonzero set point regulation. This paper presents proportional-derivative regulation for nonzero set point on SO(3) with disturbance compensation for quadrotor UAV. Quadrotor nonlinear kinematics and dynamics model in SO(3) are used to design the control law. Disturbance compensation is added to the control law by using the upper bound of the disturbance. The numerical simulation shows that the disturbance compensation is able to counter the disturbance effect and improve the bound of the state variables.

  4. Proportional Derivative Active Force Control for “X” Configuration Quadcopter

    Directory of Open Access Journals (Sweden)

    Niam Tamami

    2014-12-01

    Full Text Available This paper present a control method “x” configuration quadcopter. The control method used PDAFC (Proportional Derivative Active Force Control. PD is used to stabilize quadcopter, and AFC is used to reject uncertainty disturbance (e.g. wind by estimate disturbance torque value of quadcopter. By adding PD with AFC, better result is obtained, AFC can minimize uncertainty disturbance effect. The sensitivity toward uncertainty disturbance can be set from sensitivity constant to get best performance of disturbance rejection. Stability analysis of PDAFC was evaluated by Lyapunov stability theory.

  5. Learning to walk with an adaptive gain proportional myoelectric controller for a robotic ankle exoskeleton.

    Science.gov (United States)

    Koller, Jeffrey R; Jacobs, Daniel A; Ferris, Daniel P; Remy, C David

    2015-11-04

    Robotic ankle exoskeletons can provide assistance to users and reduce metabolic power during walking. Our research group has investigated the use of proportional myoelectric control for controlling robotic ankle exoskeletons. Previously, these controllers have relied on a constant gain to map user's muscle activity to actuation control signals. A constant gain may act as a constraint on the user, so we designed a controller that dynamically adapts the gain to the user's myoelectric amplitude. We hypothesized that an adaptive gain proportional myoelectric controller would reduce metabolic energy expenditure compared to walking with the ankle exoskeleton unpowered because users could choose their preferred control gain. We tested eight healthy subjects walking with the adaptive gain proportional myoelectric controller with bilateral ankle exoskeletons. The adaptive gain was updated each stride such that on average the user's peak muscle activity was mapped to maximal power output of the exoskeleton. All subjects participated in three identical training sessions where they walked on a treadmill for 50 minutes (30 minutes of which the exoskeleton was powered) at 1.2 ms(-1). We calculated and analyzed metabolic energy consumption, muscle recruitment, inverse kinematics, inverse dynamics, and exoskeleton mechanics. Using our controller, subjects achieved a metabolic reduction similar to that seen in previous work in about a third of the training time. The resulting controller gain was lower than that seen in previous work (β=1.50±0.14 versus a constant β=2). The adapted gain allowed users more total ankle joint power than that of unassisted walking, increasing ankle power in exchange for a decrease in hip power. Our findings indicate that humans prefer to walk with greater ankle mechanical power output than their unassisted gait when provided with an ankle exoskeleton using an adaptive controller. This suggests that robotic assistance from an exoskeleton can allow

  6. A simulation of a proposed three-phase method for proportional representation in South Africa

    Directory of Open Access Journals (Sweden)

    G. Geldenhuys

    2003-12-01

    Full Text Available In October 1922 the President's Council of the Republic of South Africa approved a report on a proportional polling system for the country in a new constitutional dispensation. A three-phase method is proposed to ensure that there is not only proportionality with respect to the electoral regions of the country, but also on a party basis with respect to the votes cast in the election. A lower house of parliament with 400 seats is proposed. In the first phase 300 of the seats are made available to the various regions in proportion to the number of eligible voters in the respective regions. In the election the various parties compete for these 300 seats in the different regions. The second phase consists of allocating the seats to the parties on the basis of the actual votes cast for them in the regions. Because of factors such as variable percentage polls and support for the parties in the separate regions, it could happen that a particular party's portion of the 300 seats is not in accordance with the votes that it receives nationally. In the third phase the remaining 100 seats are used to rectify such situations. On the basis of the votes cast, these 100 seats are used for compensatory purposes, so that the final allocation of the 400 seats to the parties should be proportional to the support for the parties in the election. Fixed regional party lists of candidates for the election and the Jefferson allocation method are used in the applicable phases. We translate the pose of the President's Council report into formal mathematical descriptions of the proposed methods. Several hypothetical examples are used to illustrate the methods and to point out possible problems. A computer program which implements the methods is described briefly and is used to simulate various elections. These simulations show that 100 compensatory seats should be sufficient for the purpose for which they were introduced. We hope that our descriptions and analyses will

  7. Quantifying emphysema extent from weakly labeled CT scans of the lungs using label proportions learning

    DEFF Research Database (Denmark)

    Ørting, Silas Nyboe; Petersen, Jens; Wille, Mathilde

    2016-01-01

    Quantification of emphysema extent is important in diagnosing and monitoring patients with chronic obstructive pulmonary disease (COPD). Several studies have shown that emphysema quantification by supervised texture classification is more robust and accurate than traditional densitometry. Current...... techniques require highly time consuming manual annotations of patches or use only weak labels indicating overall disease status (e.g, COPD or healthy). We show how visual scoring of regional emphysema extent can be exploited in a learning with label proportions (LLP) framework to both predict presence...... to medical imaging data....

  8. A comparative review of estimates of the proportion unchanged genes and the false discovery rate

    Directory of Open Access Journals (Sweden)

    Broberg Per

    2005-08-01

    Full Text Available Abstract Background In the analysis of microarray data one generally produces a vector of p-values that for each gene give the likelihood of obtaining equally strong evidence of change by pure chance. The distribution of these p-values is a mixture of two components corresponding to the changed genes and the unchanged ones. The focus of this article is how to estimate the proportion unchanged and the false discovery rate (FDR and how to make inferences based on these concepts. Six published methods for estimating the proportion unchanged genes are reviewed, two alternatives are presented, and all are tested on both simulated and real data. All estimates but one make do without any parametric assumptions concerning the distributions of the p-values. Furthermore, the estimation and use of the FDR and the closely related q-value is illustrated with examples. Five published estimates of the FDR and one new are presented and tested. Implementations in R code are available. Results A simulation model based on the distribution of real microarray data plus two real data sets were used to assess the methods. The proposed alternative methods for estimating the proportion unchanged fared very well, and gave evidence of low bias and very low variance. Different methods perform well depending upon whether there are few or many regulated genes. Furthermore, the methods for estimating FDR showed a varying performance, and were sometimes misleading. The new method had a very low error. Conclusion The concept of the q-value or false discovery rate is useful in practical research, despite some theoretical and practical shortcomings. However, it seems possible to challenge the performance of the published methods, and there is likely scope for further developing the estimates of the FDR. The new methods provide the scientist with more options to choose a suitable method for any particular experiment. The article advocates the use of the conjoint information

  9. Effect of vibrotactile feedback on an EMG-based proportional cursor control system.

    Science.gov (United States)

    Li, Shunchong; Chen, Xingyu; Zhang, Dingguo; Sheng, Xinjun; Zhu, Xiangyang

    2013-01-01

    Surface electromyography (sEMG) has been introduced into the bio-mechatronics systems, however, most of them are lack of the sensory feedback. In this paper, the effect of vibrotactile feedback for a myoelectric cursor control system is investigated quantitatively. Simultaneous and proportional control signals are extracted from EMG using a muscle synergy model. Different types of feedback including vibrotactile feedback and visual feedback are added, assessed and compared with each other. The results show that vibrotactile feedback is capable of improving the performance of EMG-based human machine interface.

  10. Magnetic monopole search by 130 m(2)sr He gas proportional counter

    Science.gov (United States)

    Hara, T.; Hayashida, N.; Honda, M.; Kamata, K.; Kobayashi, M.; Kondo, T.; Matsubara, Y.; Mori, M.; Ohno, Y.; Tanahashi, G.

    1985-01-01

    A search experiment for cosmic ray magnetic monopoles was performed by means of atomic induction mechanism by using He mixture gas proportional counters of the calorimeter (130 square meters sr) at the center of the Akeno air shower array. In 3,482 hours operation no monopole candidate was observed. The upper limit of the monopole flux is 1.44 x 10 to the minus 13th power cm-z, sec -1, sr-1 (90% C.L.) for the velocity faster than 7 x 0.0001 c.

  11. The performance of the curved grid gas proportional scintillation counter in X-ray spectrometry

    International Nuclear Information System (INIS)

    Santos, J.M.F. dos; Bento, A.C.S.S.M.; Conde, C.A.N.

    1994-01-01

    The performance of a curved grid gas proportional scintillation counter filled with xenon at 1100 mbar and having a 25 mm diameter window is evaluated for X-rays in the 1-11 keV energy range. Energy resolutions of 8.0% were obtained for a 5.9 keV parallel X-ray beam entering the detector through the full size window. The variation of the energy resolution with the X-ray energy is studied and X-ray fluorescence spectra for samples like industrial coal, painted porcelain and car lubrication oil, are presented. (orig.)

  12. ANALYSIS OF MULTIVARIATE FAILURE TIME DATA USING MARGINAL PROPORTIONAL HAZARDS MODEL.

    Science.gov (United States)

    Chen, Ying; Chen, Kani; Ying, Zhiliang

    2010-01-01

    The marginal proportional hazards model is an important tool in the analysis of multivariate failure time data in the presence of censoring. We propose a method of estimation via the linear combinations of martingale residuals. The estimation and inference procedures are easy to implement numerically. The estimation is generally more accurate than the existing pseudo-likelihood approach: the size of efficiency gain can be considerable in some cases, and the maximum relative efficiency in theory is infinite. Consistency and asymptotic normality are established. Empirical evidence in support of the theoretical claims is shown in simulation studies.

  13. Counting Characteristics Of Carbon dioxide-Filled Wall-Less Proportional Counter Suitable For Radiocarbon Dating

    International Nuclear Information System (INIS)

    Osadebe, F.A.N.; Hannan, H.H.M.A.; Uwah, E.J.

    1992-01-01

    A wall-less proportional counter that is suitable for radiocarbon dating has been developed. The counter consists of a central counter and an annular chain of twelve ring counters which are all enclosed in a cylindrical copper tube. Highly purified carbon dioxide is used as the counting gas and a chemical system designed for the purification of the gas is briefly described. The counter characteristics obtained with only tank gas as well as the purified gas are illustrated. They demonstrate the effect of electromagnetic impurities on the counter sensitivity and the significant background reduction achieved with the counter

  14. Proportion of biogenic carbon in flue gas by carbon 4 measurement

    International Nuclear Information System (INIS)

    Lehtomaeki, J.; Antson, O.; Jungner, H.

    2006-01-01

    The rules of EU's emissions trading system promote the decrease of fossile emissions. The usefulness of using waste fuels in emissions trading depends on the proportion of biogenic component. Companies need to verify the amount of renewable energy from produced energy or emissions. It can be estimated that the demand on emission measurement devices and services is large and increasing in EU and later also in the whole world. This project aims to clarify the possibilities and restrictions of C-14 isotope method in determining biogenic and fossile part of recycled fuel. (orig.)

  15. Software of data processing from the 2500-channel spectrometer with proportional chambers

    International Nuclear Information System (INIS)

    Maznyj, G.L.; Sitnik, I.M.; Strokovskij, E.A.

    1978-01-01

    A set of programs is developed for data processing from a multipurpose Alfa system, which mainly consists of proportional chambers. The set is intended for a step-by-step processing with further reduction and recording of data on a secondary tape. The programs are written mainly in FORTRAN, but to speed up the processing and decoding, compressing and decompressing subroutines are written in assembly language. A system of subprograms plotting distribution curves is also analysed from the viewpoint of its structure. Distribution plotting programs and decoders are adapted to the ES-1040 computer; monodimensional distribution programs can be run on CDC-6500 computer

  16. Time-Varying Biased Proportional Guidance with Seeker’s Field-of-View Limit

    OpenAIRE

    Yang, Zhe; Wang, Hui; Lin, Defu

    2016-01-01

    Traditional guidance laws with range-to-go information or time-to-go estimation may not be implemented in passive homing missiles since passive seekers cannot measure relative range directly. A time-varying biased proportional guidance law, which only uses line-of-sight (LOS) rate and look angle information, is proposed to satisfy both impact angle constraint and seeker’s field-of-view (FOV) limit. In the proposed guidance law, two time-varying bias terms are applied to divide the trajectory ...

  17. Position-sensitive proportional counter with low-resistance metal-wire anode

    International Nuclear Information System (INIS)

    Kopp, M.K.

    1980-01-01

    A position-sensitive proportional counter circuit is provided which uses a conventional (low-resistance, metal-wire anode) proportional counter for spatial resolution of an ionizing event along the anode of the counther. A pair of specially designed activecapacitance preamplifiers terminate the anode ends wherein the anode is treated as an RC line. The preamplifiers act as stabilized active capacitance loads and each is composed of a series-feedback, lownoise amplifier, a unity-gain, shunt-feedback amplifier whose output is connected through a feedback capacitor to the series-feedback amplifier input. The stabilized capacitance loading of the anode allows distributed RC-line position encoding and subsequent time difference decoding by sensing the difference in rise times of pulses at te anode ends where the difference is primarily in response to the distributed capacitance along the anode. This allows the use of lower resistance wire anodes for spatial radiation detection which simplifies the counter construction and handling of the anodes, and stabilizes the anode resistivity at high count rates

  18. Proportion offered in the Dictator and Ultimatum Games decreases with amount and social distance.

    Science.gov (United States)

    Bechler, Christopher; Green, Leonard; Myerson, Joel

    2015-06-01

    Behavior in both the Dictator Game and the Ultimatum Game is of special interest because proposers often violate the predictions of normative economic theory: On average, offers in both games are higher than what would be considered income-maximizing. In the present study, the initial amount provided to the proposer and the social distance between the proposer and the respondent were both varied across a wide range, and the effects of these manipulations on offers in the Dictator Game and the Ultimatum Game were examined in a broad sample of participants recruited via MTurk. Although the amount offered was consistently higher in the Ultimatum Game, the proportion of the amount offered decreased as the size of the initial amount increased in both games. Moreover, the proportion offered also decreased as a function of the social distance between the proposer and the responder. The present results extend our knowledge of the determinants of proposers' behavior in two-person economic games and emphasize the importance of social distance and the amount of money at stake as factors that affect people's economic decisions. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Proportions of Atlantic sailfish (Istiophorus platypterus and spearfish (Tetrapturus pfluegeri caught in tuna longline fisheries

    Directory of Open Access Journals (Sweden)

    Renata Maria Medeiros-Silva

    2016-11-01

    Full Text Available Abstract The reliability of estimations of catches of pelagic longline fisheries is especially worrying in the case of non-target species such as the sailfish (Istiophorus platypterus and spearfish (Tetrapturus pfluegeri, because they are often recorded aggregated in onboard maps. For this reason, generalized linear models were used to identify a number of important explanatory variables and their effect on sailfish and spearfish proportions. The response variable (number of sailfish in the aggregate capture is assumed as binomial using the logit link function. The explanatory variables used were foram year, qrt (quarter, fleet, de (distance from equator and d (distance from areas above sea level. The selected models showed that the equatorial and coastal regions presented higher densities or catchabilities of sailfish when compared to spearfish, as in the case for fleets of China Taipei and the United States. The lowest mean proportion of sailfish [sailfish/(sailfish + spearfish] of the third quarter were driven mostly by the low estimations calculated for Japan and Brazil.

  20. Performance Evaluation of Hot Mix Asphalt with Different Proportions of RAP Content

    Science.gov (United States)

    Kamil Arshad, Ahmad; Awang, Haryati; Shaffie, Ekarizan; Hashim, Wardati; Rahman, Zanariah Abd

    2018-03-01

    Reclaimed Asphalt Pavement (RAP) is old asphalt pavement that has been removed from a road by milling or full depth removal. The use of RAP in hot mix asphalt (HMA) eliminates the need to dispose old asphalt pavements and conserves asphalt binders and aggregates, resulting in significant cost savings and benefits to society. This paper presents a study on HMA with different RAP proportions carried out to evaluate the volumetric properties and performance of asphalt mixes containing different proportions of RAP. Marshall Mix Design Method was used to produce control mix (0% RAP) and asphalt mixes containing 15% RAP, 25% RAP and 35% RAP in accordance with Specifications for Road Works of Public Works Department, Malaysia for AC14 dense graded asphalt gradation. Volumetric analysis was performed to ensure that the result is compliance with specification requirements. The resilient modulus test was performed to measure the stiffness of the mixes while the Modified Lottman test was conducted to evaluate the moisture susceptibility of these mixes. The Hamburg wheel tracking test was used to evaluate the rutting performance of these mixes. The results obtained showed that there were no substantial difference in Marshall Properties, moisture susceptibility, resilient modulus and rutting resistance between asphalt mixes with RAP and the control mix. The test results indicated that recycled mixes performed as good as the performance of conventional HMA in terms of moisture susceptibility and resilient modulus. It is recommended that further research be carried out for asphalt mixes containing more than 35% RAP material.

  1. Response matrix of a multisphere neutron spectrometer with an 3 He proportional counter

    International Nuclear Information System (INIS)

    Vega C, H.R.; Manzanares A, E.; Hernandez D, V.M.; Mercado S, G.A.

    2005-01-01

    The response matrix of a Bonner sphere spectrometer was calculated by use of the MCNP code. As thermal neutron counter, the spectrometer has a 3.2 cm-diameter 3 He-filled proportional counter which is located at the center of a set of polyethylene spheres. The response was calculated for 0, 3, 5, 6, 8, 10, 12, and 16 inches-diameter polyethylene spheres for neutrons whose energy goes from 10 -9 to 20 MeV. The response matrix was compared with a set of responses measured with several monoenergetic neutron sources. In this comparison the calculated matrix agrees with the experimental results. The matrix was also compared with the response matrix calculated for the PTB C spectrometer. Even though that calculation was carried out using a detailed model to describe the proportional counter; both matrices do agree, but small differences are observed in the bare case because of the difference in the model used during calculations. Other differences are in some spheres for 14.8 and 20 MeV neutrons, probably due to the differences in the cross sections used during both calculations. (Author) 28 refs., 1 tab., 6 figs

  2. Bayesian Predictive Inference of a Proportion Under a Twofold Small-Area Model

    Directory of Open Access Journals (Sweden)

    Nandram Balgobin

    2016-03-01

    Full Text Available We extend the twofold small-area model of Stukel and Rao (1997; 1999 to accommodate binary data. An example is the Third International Mathematics and Science Study (TIMSS, in which pass-fail data for mathematics of students from US schools (clusters are available at the third grade by regions and communities (small areas. We compare the finite population proportions of these small areas. We present a hierarchical Bayesian model in which the firststage binary responses have independent Bernoulli distributions, and each subsequent stage is modeled using a beta distribution, which is parameterized by its mean and a correlation coefficient. This twofold small-area model has an intracluster correlation at the first stage and an intercluster correlation at the second stage. The final-stage mean and all correlations are assumed to be noninformative independent random variables. We show how to infer the finite population proportion of each area. We have applied our models to synthetic TIMSS data to show that the twofold model is preferred over a onefold small-area model that ignores the clustering within areas. We further compare these models using a simulation study, which shows that the intracluster correlation is particularly important.

  3. Positron imaging with multiwire proportional chamber-gamma converter hybrid detectors

    International Nuclear Information System (INIS)

    Chu, D.Y.H.

    1976-09-01

    A large area positron camera was developed using multiwire proportional chambers as detectors and electromagnetic delay lines for coordinate readout. Honeycomb structured gamma converters made of lead are coupled to the chambers for efficient gamma detection and good spatial resolution. Two opposing detectors, each having a sensitive area of 48 cm x 48 cm, are operated in coincidence for the detection of annihilation gammas (511 keV) from positron emitters. Detection efficiency of 4.2 percent per detector and spatial resolution of 6 to 7 mm FWHM at the mid-plane were achieved. The present camera operates at a maximum count rate of 24 K counts/min, limited by accidental coincidence. The theory for the gamma converter is presented along with a review of the operation of the multiwire proportional chamber and delay line readout. Calculated gamma converter efficiencies are compared with the measured results using a prototype test chamber. The characteristics of the positron camera system is evaluated, and the performance is shown to be consistent with calculation

  4. Proportion of selected congenital heart defects attributable to recognized risk factors.

    Science.gov (United States)

    Simeone, Regina M; Tinker, Sarah C; Gilboa, Suzanne M; Agopian, A J; Oster, Matthew E; Devine, Owen J; Honein, Margaret A

    2016-12-01

    To assess the contribution of multiple risk factors for two congenital heart defects-hypoplastic left heart syndrome (HLHS) and tetralogy of Fallot (TOF). We used data from the National Birth Defects Prevention Study (1997-2011) to estimate average adjusted population attributable fractions for several recognized risk factors, including maternal prepregnancy overweight-obesity, pregestational diabetes, age, and infant sex. There were 594 cases of isolated simple HLHS, 971 cases of isolated simple TOF, and 11,829 controls in the analysis. Overall, 57.0% of HLHS cases and 37.0% of TOF cases were estimated to be attributable to risk factors included in our model. Among modifiable HLHS risk factors, maternal prepregnancy overweight-obesity accounted for the largest proportion of cases (6.5%). Among modifiable TOF risk factors, maternal prepregnancy overweight-obesity and maternal age of 35 years or older accounted for the largest proportions of cases (8.3% and 4.3%, respectively). Approximately half of HLHS cases and one-third of TOF cases were estimated to be attributable to risk factors included in our models. Interventions targeting factors that can be modified may help reduce the risk of HLHS and TOF development. Additional research into the etiology of HLHS and TOF may reveal other modifiable risk factors that might contribute to primary prevention efforts. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

    Science.gov (United States)

    Tang, Zhichuan; Zhang, Kejun; Sun, Shouqian; Gao, Zenggui; Zhang, Lekai; Yang, Zhongliang

    2014-01-01

    We developed an upper-limb power-assist exoskeleton actuated by pneumatic muscles. The exoskeleton included two metal links: a nylon joint, four size-adjustable carbon fiber bracers, a potentiometer and two pneumatic muscles. The proportional myoelectric control method was proposed to control the exoskeleton according to the user's motion intention in real time. With the feature extraction procedure and the classification (back-propagation neural network), an electromyogram (EMG)-angle model was constructed to be used for pattern recognition. Six healthy subjects performed elbow flexion-extension movements under four experimental conditions: (1) holding a 1-kg load, wearing the exoskeleton, but with no actuation and for different periods (2-s, 4-s and 8-s periods); (2) holding a 1-kg load, without wearing the exoskeleton, for a fixed period; (3) holding a 1-kg load, wearing the exoskeleton, but with no actuation, for a fixed period; (4) holding a 1-kg load, wearing the exoskeleton under proportional myoelectric control, for a fixed period. The EMG signals of the biceps brachii, the brachioradialis, the triceps brachii and the anconeus and the angle of the elbow were collected. The control scheme's reliability and power-assist effectiveness were evaluated in the experiments. The results indicated that the exoskeleton could be controlled by the user's motion intention in real time and that it was useful for augmenting arm performance with neurological signal control, which could be applied to assist in elbow rehabilitation after neurological injury. PMID:24727501

  6. Digitally controlled analog proportional-integral-derivative (PID) controller for high-speed scanning probe microscopy.

    Science.gov (United States)

    Dukic, Maja; Todorov, Vencislav; Andany, Santiago; Nievergelt, Adrian P; Yang, Chen; Hosseini, Nahid; Fantner, Georg E

    2017-12-01

    Nearly all scanning probe microscopes (SPMs) contain a feedback controller, which is used to move the scanner in the direction of the z-axis in order to maintain a constant setpoint based on the tip-sample interaction. The most frequently used feedback controller in SPMs is the proportional-integral (PI) controller. The bandwidth of the PI controller presents one of the speed limiting factors in high-speed SPMs, where higher bandwidths enable faster scanning speeds and higher imaging resolution. Most SPM systems use digital signal processor-based PI feedback controllers, which require analog-to-digital and digital-to-analog converters. These converters introduce additional feedback delays which limit the achievable imaging speed and resolution. In this paper, we present a digitally controlled analog proportional-integral-derivative (PID) controller. The controller implementation allows tunability of the PID gains over a large amplification and frequency range, while also providing precise control of the system and reproducibility of the gain parameters. By using the analog PID controller, we were able to perform successful atomic force microscopy imaging of a standard silicon calibration grating at line rates up to several kHz.

  7. Effects of plant density and proportion on the interaction between wheat with alexandergrass plants

    Directory of Open Access Journals (Sweden)

    Leonardo Bianco de Carvalho

    2011-01-01

    Full Text Available Determination of competitive relationships among plant species requires appropriate experimental designs and method of analysis. The hypothesis of this research was that two species growing in coexistence show different growth and development due to their relative competitiveness. This research aims to measure the relative competitiveness of wheat crop compared to Alexandergrass by the interpretation of plant density and proportional effects using replacement series experiments. Monocultures were cultivated in densities of 1, 3, 5, 10 and 15 plants per pot and analyzed by regression of dry mass data. Mixture experiment was cultivated in wheat:Alexandergrass proportions of 0:6, 1:5, 2:4, 3:3, 4:2, 5:1 and 6:0 plants per pot and analyzed by graphical interpretation of growth and production characteristics. Both experiments were carried out in randomized complete block design with four replicates. Alexandergrass was more sensitive to intraspecific competition than wheat. Alexandergrass was lightly more competitive than wheat. Number and weight of spikes and number of tillers were the wheat characteristics more affected by Alexandergrass interference.

  8. eulerAPE: drawing area-proportional 3-Venn diagrams using ellipses.

    Science.gov (United States)

    Micallef, Luana; Rodgers, Peter

    2014-01-01

    Venn diagrams with three curves are used extensively in various medical and scientific disciplines to visualize relationships between data sets and facilitate data analysis. The area of the regions formed by the overlapping curves is often directly proportional to the cardinality of the depicted set relation or any other related quantitative data. Drawing these diagrams manually is difficult and current automatic drawing methods do not always produce appropriate diagrams. Most methods depict the data sets as circles, as they perceptually pop out as complete distinct objects due to their smoothness and regularity. However, circles cannot draw accurate diagrams for most 3-set data and so the generated diagrams often have misleading region areas. Other methods use polygons to draw accurate diagrams. However, polygons are non-smooth and non-symmetric, so the curves are not easily distinguishable and the diagrams are difficult to comprehend. Ellipses are more flexible than circles and are similarly smooth, but none of the current automatic drawing methods use ellipses. We present eulerAPE as the first method and software that uses ellipses for automatically drawing accurate area-proportional Venn diagrams for 3-set data. We describe the drawing method adopted by eulerAPE and we discuss our evaluation of the effectiveness of eulerAPE and ellipses for drawing random 3-set data. We compare eulerAPE and various other methods that are currently available and we discuss differences between their generated diagrams in terms of accuracy and ease of understanding for real world data.

  9. Digitally controlled analog proportional-integral-derivative (PID) controller for high-speed scanning probe microscopy

    Science.gov (United States)

    Dukic, Maja; Todorov, Vencislav; Andany, Santiago; Nievergelt, Adrian P.; Yang, Chen; Hosseini, Nahid; Fantner, Georg E.

    2017-12-01

    Nearly all scanning probe microscopes (SPMs) contain a feedback controller, which is used to move the scanner in the direction of the z-axis in order to maintain a constant setpoint based on the tip-sample interaction. The most frequently used feedback controller in SPMs is the proportional-integral (PI) controller. The bandwidth of the PI controller presents one of the speed limiting factors in high-speed SPMs, where higher bandwidths enable faster scanning speeds and higher imaging resolution. Most SPM systems use digital signal processor-based PI feedback controllers, which require analog-to-digital and digital-to-analog converters. These converters introduce additional feedback delays which limit the achievable imaging speed and resolution. In this paper, we present a digitally controlled analog proportional-integral-derivative (PID) controller. The controller implementation allows tunability of the PID gains over a large amplification and frequency range, while also providing precise control of the system and reproducibility of the gain parameters. By using the analog PID controller, we were able to perform successful atomic force microscopy imaging of a standard silicon calibration grating at line rates up to several kHz.

  10. Photon and neutron dose discrimination using low pressure proportional counters with graphite and A150 walls

    International Nuclear Information System (INIS)

    Kylloenen, J.; Lindborg, L.

    2005-01-01

    Full text: The determination of both the low- and high-LET components of ambient dose equivalent in mixed fields is possible with microdosimetric methods. With the multiple-event microdosimetric variance covariance method the sum of those components are directly obtained also in pulsed beams. However, if the value of each dose component is needed a more extended analysis is required. The use of a graphite walled proportional detector in combination with a tissue-equivalent proportional counter in combination with the variance covariance method was here investigated. MCNP simulations were carried out for relevant energies to investigate the photon and neutron responses of the two detectors. The combined graphite and TEPC system, the Sievert instrument, was used for measurements at IRSN, Cadarache, in the workplace calibration fields of CANEL+, SIGMA, a Cf-252 and a moderated Cf(D 2 O,Cd) radiation field. The response of the instrument in various monoenergetic neutron fields is also known from measurements at PTB. The instrument took part in the measurement campaigns in workplace fields in the nuclear industry organized within the EVIDOS contract. The results are analyzed and the method of using a graphite detector compared with alternative methods of analysis is discussed. (author)

  11. Cognitive models of choice: comparing decision field theory to the proportional difference model.

    Science.gov (United States)

    Scheibehenne, Benjamin; Rieskamp, Jörg; González-Vallejo, Claudia

    2009-07-01

    People often face preferential decisions under risk. To further our understanding of the cognitive processes underlying these preferential choices, two prominent cognitive models, decision field theory (DFT; Busemeyer & Townsend, 1993) and the proportional difference model (PD; González-Vallejo, 2002), were rigorously tested against each other. In two consecutive experiments, the participants repeatedly had to choose between monetary gambles. The first experiment provided the reference to estimate the models' free parameters. From these estimations, new gamble pairs were generated for the second experiment such that the two models made maximally divergent predictions. In the first experiment, both models explained the data equally well. However, in the second generalization experiment, the participants' choices were much closer to the predictions of DFT. The results indicate that the stochastic process assumed by DFT, in which evidence in favor of or against each option accumulates over time, described people's choice behavior better than the trade-offs between proportional differences assumed by PD. Copyright © 2009 Cognitive Science Society, Inc.

  12. Imaging micro-well proportional counters fabricated with masked UV laser ablation

    CERN Document Server

    Deines-Jones, P; Crawford, H; Hunter, S D

    2002-01-01

    The micro-well detector is a gas-proportional counter similar to the CAT (Bartol et al., J. Phys. III 6 (1996) 337) and WELL detectors (Bellazzini et al., Nucl. Instr. and Meth. A 423 (1999) 125). The micro-well is a cylindrical hole formed in the polymer substrate of commercially fabricated copper-clad flexible printed circuit board by UV laser ablation. The micro-wells are drilled at GSFC's UV laser-ablation facility. The cathode is a metal annulus that surrounds the opening of the well. The anode is a metal pad that fills the bottom of the well. Advantages of this topology include intrinsic two-dimensional sensing, thick robust electrodes, and large localized image charge on the cathodes. We have fabricated 5 cmx5 cm micro-well detectors with segmented anodes (1-d) and with both anodes and cathodes segmented (2-d), and have demonstrated: - stable, proportional operation at gas gains in excess of 30,000 in Ar- and Xe-based gases; - FWHM energy resolution of 20% at 6 keV in P-10; - preliminary 1-d spatial re...

  13. Calibration of an ultra-low-background proportional counter for measuring 37Ar

    International Nuclear Information System (INIS)

    Seifert, A.; Aalseth, C. E.; Bonicalzi, R. M.; Bowyer, T. W.; Day, A. R.; Fuller, E. S.; Haas, D. A.; Hayes, J. C.; Hoppe, E. W.; Humble, P. H.; Keillor, M. E.; LaFerriere, B. D.; Mace, E. K.; McIntyre, J. I.; Merriman, J. H.; Miley, H. S.; Myers, A. W.; Orrell, J. L.; Overman, C. T.; Panisko, M. E.

    2013-01-01

    An ultra-low-background proportional counter design has been developed at Pacific Northwest National Laboratory (PNNL) using clean materials, primarily electro-chemically-purified copper. This detector, along with an ultra-low-background counting system (ULBCS), was developed to complement a new shallow underground laboratory (30 meters water-equivalent) at PNNL. The ULBCS design includes passive neutron and gamma shielding, along with an active cosmic-veto system. This system provides a capability for making ultra-sensitive measurements to support applications like age-dating soil hydrocarbons with 14 C/ 3 H, age-dating of groundwater with 39 Ar, and soil-gas assay for 37 Ar to support On-Site Inspection (OSI). On-Site Inspection is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclides created by an underground nuclear explosion are valuable signatures of a Treaty violation. For OSI, the 35-day half-life of 37 Ar, produced from neutron interactions with calcium in soil, provides both high specific activity and sufficient time for inspection before decay limits sensitivity. This work describes the calibration techniques and analysis methods developed to enable quantitative measurements of 37 Ar samples over a broad range of proportional counter operating pressures. These efforts, along with parallel work in progress on gas chemistry separation, are expected to provide a significant new capability for 37 Ar soil gas background studies

  14. Wolf (Canis lupus Generation Time and Proportion of Current Breeding Females by Age.

    Directory of Open Access Journals (Sweden)

    L David Mech

    Full Text Available Information is sparse about aspects of female wolf (Canis lupus breeding in the wild, including age of first reproduction, mean age of primiparity, generation time, and proportion of each age that breeds in any given year. We studied these subjects in 86 wolves (113 captures in the Superior National Forest (SNF, Minnesota (MN, during 1972-2013 where wolves were legally protected for most of the period, and in 159 harvested wolves from throughout MN wolf range during 2012-2014. Breeding status of SNF wolves were assessed via nipple measurements, and wolves from throughout MN wolf range, by placental scars. In the SNF, proportions of currently breeding females (those breeding in the year sampled ranged from 19% at age 2 to 80% at age 5, and from throughout wolf range, from 33% at age 2 to 100% at age 7. Excluding pups and yearlings, only 33% to 36% of SNF females and 58% of females from throughout MN wolf range bred in any given year. Generation time for SNF wolves was 4.3 years and for MN wolf range, 4.7 years. These findings will be useful in modeling wolf population dynamics and in wolf genetic and dog-domestication studies.

  15. Performance Evaluation of Hot Mix Asphalt with Different Proportions of RAP Content

    Directory of Open Access Journals (Sweden)

    Kamil Arshad Ahmad

    2018-01-01

    Full Text Available Reclaimed Asphalt Pavement (RAP is old asphalt pavement that has been removed from a road by milling or full depth removal. The use of RAP in hot mix asphalt (HMA eliminates the need to dispose old asphalt pavements and conserves asphalt binders and aggregates, resulting in significant cost savings and benefits to society. This paper presents a study on HMA with different RAP proportions carried out to evaluate the volumetric properties and performance of asphalt mixes containing different proportions of RAP. Marshall Mix Design Method was used to produce control mix (0% RAP and asphalt mixes containing 15% RAP, 25% RAP and 35% RAP in accordance with Specifications for Road Works of Public Works Department, Malaysia for AC14 dense graded asphalt gradation. Volumetric analysis was performed to ensure that the result is compliance with specification requirements. The resilient modulus test was performed to measure the stiffness of the mixes while the Modified Lottman test was conducted to evaluate the moisture susceptibility of these mixes. The Hamburg wheel tracking test was used to evaluate the rutting performance of these mixes. The results obtained showed that there were no substantial difference in Marshall Properties, moisture susceptibility, resilient modulus and rutting resistance between asphalt mixes with RAP and the control mix. The test results indicated that recycled mixes performed as good as the performance of conventional HMA in terms of moisture susceptibility and resilient modulus. It is recommended that further research be carried out for asphalt mixes containing more than 35% RAP material.

  16. Wolf (Canis lupus) Generation Time and Proportion of Current Breeding Females by Age.

    Science.gov (United States)

    Mech, L David; Barber-Meyer, Shannon M; Erb, John

    2016-01-01

    Information is sparse about aspects of female wolf (Canis lupus) breeding in the wild, including age of first reproduction, mean age of primiparity, generation time, and proportion of each age that breeds in any given year. We studied these subjects in 86 wolves (113 captures) in the Superior National Forest (SNF), Minnesota (MN), during 1972-2013 where wolves were legally protected for most of the period, and in 159 harvested wolves from throughout MN wolf range during 2012-2014. Breeding status of SNF wolves were assessed via nipple measurements, and wolves from throughout MN wolf range, by placental scars. In the SNF, proportions of currently breeding females (those breeding in the year sampled) ranged from 19% at age 2 to 80% at age 5, and from throughout wolf range, from 33% at age 2 to 100% at age 7. Excluding pups and yearlings, only 33% to 36% of SNF females and 58% of females from throughout MN wolf range bred in any given year. Generation time for SNF wolves was 4.3 years and for MN wolf range, 4.7 years. These findings will be useful in modeling wolf population dynamics and in wolf genetic and dog-domestication studies.

  17. Atomic Theory and Multiple Combining Proportions: The Search for Whole Number Ratios.

    Science.gov (United States)

    Usselman, Melvyn C; Brown, Todd A

    2015-04-01

    John Dalton's atomic theory, with its postulate of compound formation through atom-to-atom combination, brought a new perspective to weight relationships in chemical reactions. A presumed one-to-one combination of atoms A and B to form a simple compound AB allowed Dalton to construct his first table of relative atomic weights from literature analyses of appropriate binary compounds. For such simple binary compounds, the atomic theory had little advantages over affinity theory as an explanation of fixed proportions by weight. For ternary compounds of the form AB2, however, atomic theory made quantitative predictions that were not deducible from affinity theory. Atomic theory required that the weight of B in the compound AB2 be exactly twice that in the compound AB. Dalton, Thomas Thomson and William Hyde Wollaston all published within a few years of each other experimental data that claimed to give the predicted results with the required accuracy. There are nonetheless several experimental barriers to obtaining the desired integral multiple proportions. In this paper I will discuss replication experiments which demonstrate that only Wollaston's results are experimentally reliable. It is likely that such replicability explains why Wollaston's experiments were so influential.

  18. Analysis and compensation for the cascade dead-zones in the proportional control valve.

    Science.gov (United States)

    Xu, Bing; Su, Qi; Zhang, Junhui; Lu, Zhenyu

    2017-01-01

    The four-way proportional directional control valve has been widely used as the main stage spring constant for the two-stage proportional control valve (PDV). Since a tradeoff should be made between manufacturing costs and static performance, two symmetry dead-zones are introduced in the main stage spring constant: the center dead-zone caused by the center floating position and the intermediate dead-zone caused by the intermediate position. Though the intermediate dead-zone is much smaller than the center dead-zone, it has significant effect on the dynamic position tracking performance. In this paper, the cascade dead-zones problem in a typical two-stage PDV is analyzed and a cascade dead-zones model is proposed for the main stage spring constant. Then, a cascade dead-zones inverse method is improved with gain estimation and dead-zone detection to compensate the dead-zone nonlinearity. Finally, a digital controller is designed for verification. The comparative experimental results indicate that it is effective to reduce the large position tracking error when the proposed method is applied. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  19. Random non-proportional fatigue tests with planar tri-axial fatigue testing machine

    Directory of Open Access Journals (Sweden)

    T. Inoue

    2016-10-01

    Full Text Available Complex stresses, which occur on the mechanical surfaces of transport machinery in service, bring a drastic degradation in fatigue life. However, it is hard to reproduce such complex stress states for evaluating the fatigue life with conventional multiaxial fatigue machines. We have developed a fatigue testing machine that enables reproduction of such complex stresses. The testing machine can reproduce arbitrary in-plane stress states by applying three independent loads to the test specimen using actuators which apply loads in the 0, 45, and 90 degree directions. The reproduction was tested with complex stress data obtained from the actual operation of transport machinery. As a result, it was found that the reproduced stress corresponded to the measured stress with an error range of less than 10 %. Then, we made a comparison between measured fatigue lives under random non-proportional loading conditions and predicted fatigue lives. It was found that predicted fatigue lives with cr, stress on critical plane, were over a factor of 10 against measured fatigue lives. On the other hand, predicted fatigue lives with ma, stress in consideration of a non-proportional level evaluated by using amplitude and direction of principal stress, were within a factor of 3 against measured fatigue lives

  20. Implementation of sliding mode controller plus proportional double integral controller for negative output elementary boost converter

    Directory of Open Access Journals (Sweden)

    K. Ramash Kumar

    2016-06-01

    Full Text Available This article presents a design, output voltage and inductor current regulations of the negative output elementary boost converter (NOEBC operated in continuous conduction mode (CCM using sliding mode controller (SMC plus proportional double integral controller (PDIC. The NOEBC is a dc–dc converter that can provide high voltage transfer gain, high efficiency, and reduced output voltage and inductor current ripples in comparison with the conventional boost converter. Owing to the time varying switched mode operation, the dynamic characteristics of the NOEBC is non-linear and the designed SMC plus PDIC aims at enhancing the dynamic characteristics along with the inductor current and the output voltage regulations of the NOEBC. The proposed SMC is more appropriate to the essentially variable-structured NOEBC when represented in the state-space average based model. Here, the PDIC suppresses the steady state error and excellent initial start-up response of NOEBC in spite of input supply voltage and load resistance variations. The performance of the SMC plus PDIC is verified for its robustness to perform over a broad range of working conditions in MATLAB/Simulink models as well as in the experimental with the comparative study of a SMC plus proportional-integral-controller (PIC. Simulation and experimental results are presented.