13C, 15N Resonance Assignment of Parts of the HET-s Prion Protein in its Amyloid Form

International Nuclear Information System (INIS)

Siemer, Ansgar B.; Ritter, Christiane; Steinmetz, Michel O.; Ernst, Matthias; Riek, Roland; Meier, Beat H.

2006-01-01

The partial 15 N and 13 C solid-state NMR resonance assignment of the HET-s prion protein fragment 218-289 in its amyloid form is presented. It is based on experiments measured at MAS frequencies in the range of 20-40 kHz using exclusively adiabatic polarization-transfer schemes. The resonance assignment within each residue is based on two-dimensional 13 C-- 13 C correlation spectra utilizing the DREAM mixing scheme. The sequential linking of the assigned residues used a set of two- and three-dimensional 15 N-- 13 C correlation experiments. Almost all cross peaks visible in the spectra are assigned, but only resonances from 43 of the 78 amino-acid residues could be detected. The missing residues are thought to be highly disordered and/or highly dynamic giving rise to broad resonance lines that escaped detection in the experiments applied. The line widths of the observed resonances are narrow and comparable to line widths observed in micro-crystalline samples. The 43 assigned residues are located in two fragments of about 20 residues

Causal Effects of Single-Sex Schools on College Entrance Exams and College Attendance: Random Assignment in Seoul High Schools

Science.gov (United States)

Park, Hyunjoon; Behrman, Jere R.; Choi, Jaesung

2012-01-01

Despite the voluminous literature on the potentials of single-sex schools, there is no consensus on the effects of single-sex schools because of student selection of school types. We exploit a unique feature of schooling in Seoul—the random assignment of students into single-sex versus coeducational high schools—to assess causal effects of single-sex schools on college entrance exam scores and college attendance. Our validation of the random assignment shows comparable socioeconomic backgrounds and prior academic achievement of students attending single-sex schools and coeducational schools, which increases the credibility of our causal estimates of single-sex school effects. The three-level hierarchical model shows that attending all-boys schools or all-girls schools, rather than coeducational schools, is significantly associated with higher average scores on Korean and English test scores. Applying the school district fixed-effects models, we find that single-sex schools produce a higher percentage of graduates who attended four-year colleges and a lower percentage of graduates who attended two-year junior colleges than do coeducational schools. The positive effects of single-sex schools remain substantial, even after we take into account various school-level variables, such as teacher quality, the student-teacher ratio, the proportion of students receiving lunch support, and whether the schools are public or private. PMID:23073751

Causal effects of single-sex schools on college entrance exams and college attendance: random assignment in Seoul high schools.

Science.gov (United States)

Park, Hyunjoon; Behrman, Jere R; Choi, Jaesung

2013-04-01

Despite the voluminous literature on the potentials of single-sex schools, there is no consensus on the effects of single-sex schools because of student selection of school types. We exploit a unique feature of schooling in Seoul-the random assignment of students into single-sex versus coeducational high schools-to assess causal effects of single-sex schools on college entrance exam scores and college attendance. Our validation of the random assignment shows comparable socioeconomic backgrounds and prior academic achievement of students attending single-sex schools and coeducational schools, which increases the credibility of our causal estimates of single-sex school effects. The three-level hierarchical model shows that attending all-boys schools or all-girls schools, rather than coeducational schools, is significantly associated with higher average scores on Korean and English test scores. Applying the school district fixed-effects models, we find that single-sex schools produce a higher percentage of graduates who attended four-year colleges and a lower percentage of graduates who attended two-year junior colleges than do coeducational schools. The positive effects of single-sex schools remain substantial, even after we take into account various school-level variables, such as teacher quality, the student-teacher ratio, the proportion of students receiving lunch support, and whether the schools are public or private.

Single Machine Scheduling and Due Date Assignment with Past-Sequence-Dependent Setup Time and Position-Dependent Processing Time

Directory of Open Access Journals (Sweden)

Chuan-Li Zhao

2014-01-01

Full Text Available This paper considers single machine scheduling and due date assignment with setup time. The setup time is proportional to the length of the already processed jobs; that is, the setup time is past-sequence-dependent (p-s-d. It is assumed that a job's processing time depends on its position in a sequence. The objective functions include total earliness, the weighted number of tardy jobs, and the cost of due date assignment. We analyze these problems with two different due date assignment methods. We first consider the model with job-dependent position effects. For each case, by converting the problem to a series of assignment problems, we proved that the problems can be solved in On4 time. For the model with job-independent position effects, we proved that the problems can be solved in On3 time by providing a dynamic programming algorithm.

Single-point incremental forming and formability-failure diagrams

DEFF Research Database (Denmark)

Silva, M.B.; Skjødt, Martin; Atkins, A.G.

2008-01-01

In a recent work [1], the authors constructed a closed-form analytical model that is capable of dealing with the fundamentals of single point incremental forming and explaining the experimental and numerical results published in the literature over the past couple of years. The model is based...... of deformation that are commonly found in general single point incremental forming processes; and (ii) to investigate the formability limits of SPIF in terms of ductile damage mechanics and the question of whether necking does, or does not, precede fracture. Experimentation by the authors together with data...

Optimizing and accelerating the assignation of lineages in Mycobacterium tuberculosis using novel alternative single-tube assays.

Directory of Open Access Journals (Sweden)

María Carcelén

Full Text Available The assignation of lineages in Mycobacterium tuberculosis (MTB provides valuable information for evolutionary and phylogeographic studies and makes for more accurate knowledge of the distribution of this pathogen worldwide. Differences in virulence have also been found for certain lineages. MTB isolates were initially assigned to lineages based on data obtained from genotyping techniques, such as spoligotyping or MIRU-VNTR analysis, some of which are more suitable for molecular epidemiology studies. However, since these methods are subject to a certain degree of homoplasy, other criteria have been chosen to assign lineages. These are based on targeting robust and specific SNPs for each lineage. Here, we propose two newly designed multiplex targeting methods-both of which are single-tube tests-to optimize the assignation of the six main lineages in MTB. The first method is based on ASO-PCR and offers an inexpensive and easy-to-implement assay for laboratories with limited resources. The other, which is based on SNaPshot, enables more refined standardized assignation of lineages for laboratories with better resources. Both methods performed well when assigning lineages from cultured isolates from a control panel, a test panel, and a problem panel from an unrelated population, Mexico, which included isolates in which standard genotyping was not able to classify lineages. Both tests were also able to assign lineages from stored isolates, without the need for subculture or purification of DNA, and even directly from clinical specimens with a medium-high bacilli burden. Our assays could broaden the contexts where information on lineages can be acquired, thus enabling us to quickly update data from retrospective collections and to merge data with those obtained at the time of diagnosis of a new TB case.

Methods of forming single source precursors, methods of forming polymeric single source precursors, and single source precursors and intermediate products formed by such methods

Science.gov (United States)

Fox, Robert V.; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin; Margulieux, Kelsey R.; Holland, Andrew W.

2012-12-04

Methods of forming single source precursors (SSPs) include forming intermediate products having the empirical formula 1/2{L.sub.2N(.mu.-X).sub.2M'X.sub.2}.sub.2, and reacting MER with the intermediate products to form SSPs of the formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2, wherein L is a Lewis base, M is a Group IA atom, N is a Group IB atom, M' is a Group IIIB atom, each E is a Group VIB atom, each X is a Group VIIA atom or a nitrate group, and each R group is an alkyl, aryl, vinyl, (per)fluoro alkyl, (per)fluoro aryl, silane, or carbamato group. Methods of forming polymeric or copolymeric SSPs include reacting at least one of HE.sup.1R.sup.1E.sup.1H and MER with one or more substances having the empirical formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2 or L.sub.2N(.mu.-X).sub.2M'(X).sub.2 to form a polymeric or copolymeric SSP. New SSPs and intermediate products are formed by such methods.

Java bytecode verification via static single assignment form

DEFF Research Database (Denmark)

Gal, Andreas; Probst, Christian W.; Franz, Michael

2008-01-01

Java Virtual Machines (JVMs) traditionally perform bytecode verification by way of an iterative data-flow analysis. Bytecode verification is necessary to ensure type safety because temporary variables in the JVM are not statically typed. We present an alternative verification mechanism that trans......Java Virtual Machines (JVMs) traditionally perform bytecode verification by way of an iterative data-flow analysis. Bytecode verification is necessary to ensure type safety because temporary variables in the JVM are not statically typed. We present an alternative verification mechanism...

Fair Package Assignment

Science.gov (United States)

Lahaie, Sébastien; Parkes, David C.

We consider the problem of fair allocation in the package assignment model, where a set of indivisible items, held by single seller, must be efficiently allocated to agents with quasi-linear utilities. A fair assignment is one that is efficient and envy-free. We consider a model where bidders have superadditive valuations, meaning that items are pure complements. Our central result is that core outcomes are fair and even coalition-fair over this domain, while fair distributions may not even exist for general valuations. Of relevance to auction design, we also establish that the core is equivalent to the set of anonymous-price competitive equilibria, and that superadditive valuations are a maximal domain that guarantees the existence of anonymous-price competitive equilibrium. Our results are analogs of core equivalence results for linear prices in the standard assignment model, and for nonlinear, non-anonymous prices in the package assignment model with general valuations.

A high throughput single nucleotide polymorphism multiplex assay for parentage assignment in New Zealand sheep.

Directory of Open Access Journals (Sweden)

Shannon M Clarke

Full Text Available Accurate pedigree information is critical to animal breeding systems to ensure the highest rate of genetic gain and management of inbreeding. The abundance of available genomic data, together with development of high throughput genotyping platforms, means that single nucleotide polymorphisms (SNPs are now the DNA marker of choice for genomic selection studies. Furthermore the superior qualities of SNPs compared to microsatellite markers allows for standardization between laboratories; a property that is crucial for developing an international set of markers for traceability studies. The objective of this study was to develop a high throughput SNP assay for use in the New Zealand sheep industry that gives accurate pedigree assignment and will allow a reduction in breeder input over lambing. This required two phases of development--firstly, a method of extracting quality DNA from ear-punch tissue performed in a high throughput cost efficient manner and secondly a SNP assay that has the ability to assign paternity to progeny resulting from mob mating. A likelihood based approach to infer paternity was used where sires with the highest LOD score (log of the ratio of the likelihood given parentage to likelihood given non-parentage are assigned. An 84 "parentage SNP panel" was developed that assigned, on average, 99% of progeny to a sire in a problem where there were 3,000 progeny from 120 mob mated sires that included numerous half sib sires. In only 6% of those cases was there another sire with at least a 0.02 probability of paternity. Furthermore dam information (either recorded, or by genotyping possible dams was absent, highlighting the SNP test's suitability for paternity testing. Utilization of this parentage SNP assay will allow implementation of progeny testing into large commercial farms where the improved accuracy of sire assignment and genetic evaluations will increase genetic gain in the sheep industry.

{sup 13}C, {sup 15}N Resonance Assignment of Parts of the HET-s Prion Protein in its Amyloid Form

Energy Technology Data Exchange (ETDEWEB)

Siemer, Ansgar B. [Physical Chemistry (Switzerland); Ritter, Christiane [Salk Institute, Structural Biology Laboratory (United States); Steinmetz, Michel O. [Paul Scherrer Institut, Biomolecular Research, Structural Biology (Switzerland); Ernst, Matthias [Physical Chemistry (Switzerland); Riek, Roland [Salk Institute, Structural Biology Laboratory (United States); Meier, Beat H. [Physical Chemistry (Switzerland)

2006-02-15

The partial {sup 15}N and {sup 13}C solid-state NMR resonance assignment of the HET-s prion protein fragment 218-289 in its amyloid form is presented. It is based on experiments measured at MAS frequencies in the range of 20-40 kHz using exclusively adiabatic polarization-transfer schemes. The resonance assignment within each residue is based on two-dimensional {sup 13}C--{sup 13}C correlation spectra utilizing the DREAM mixing scheme. The sequential linking of the assigned residues used a set of two- and three-dimensional {sup 15}N--{sup 13}C correlation experiments. Almost all cross peaks visible in the spectra are assigned, but only resonances from 43 of the 78 amino-acid residues could be detected. The missing residues are thought to be highly disordered and/or highly dynamic giving rise to broad resonance lines that escaped detection in the experiments applied. The line widths of the observed resonances are narrow and comparable to line widths observed in micro-crystalline samples. The 43 assigned residues are located in two fragments of about 20 residues.

Assigning Significance in Label-Free Quantitative Proteomics to Include Single-Peptide-Hit Proteins with Low Replicates

OpenAIRE

Li, Qingbo

2010-01-01

When sample replicates are limited in a label-free proteomics experiment, selecting differentially regulated proteins with an assignment of statistical significance remains difficult for proteins with a single-peptide hit or a small fold-change. This paper aims to address this issue. An important component of the approach employed here is to utilize the rule of Minimum number of Permuted Significant Pairings (MPSP) to reduce false positives. The MPSP rule generates permuted sample pairings fr...

Single-Sex Schools, Student Achievement, and Course Selection: Evidence from Rule-Based Student Assignments in Trinidad and Tobago. NBER Working Paper No. 16817

Science.gov (United States)

Jackson, C. Kirabo

2011-01-01

Existing studies on single-sex schooling suffer from biases due to student selection to schools and single-sex schools being better in unmeasured ways. In Trinidad and Tobago students are assigned to secondary schools based on an algorithm allowing one to address self-selection bias and cleanly estimate an upper-bound single-sex school effect. The…

Kaleido: Visualizing Big Brain Data with Automatic Color Assignment for Single-Neuron Images.

Science.gov (United States)

Wang, Ting-Yuan; Chen, Nan-Yow; He, Guan-Wei; Wang, Guo-Tzau; Shih, Chi-Tin; Chiang, Ann-Shyn

2018-03-03

Effective 3D visualization is essential for connectomics analysis, where the number of neural images easily reaches over tens of thousands. A formidable challenge is to simultaneously visualize a large number of distinguishable single-neuron images, with reasonable processing time and memory for file management and 3D rendering. In the present study, we proposed an algorithm named "Kaleido" that can visualize up to at least ten thousand single neurons from the Drosophila brain using only a fraction of the memory traditionally required, without increasing computing time. Adding more brain neurons increases memory only nominally. Importantly, Kaleido maximizes color contrast between neighboring neurons so that individual neurons can be easily distinguished. Colors can also be assigned to neurons based on biological relevance, such as gene expression, neurotransmitters, and/or development history. For cross-lab examination, the identity of every neuron is retrievable from the displayed image. To demonstrate the effectiveness and tractability of the method, we applied Kaleido to visualize the 10,000 Drosophila brain neurons obtained from the FlyCircuit database ( http://www.flycircuit.tw/modules.php?name=kaleido ). Thus, Kaleido visualization requires only sensible computer memory for manual examination of big connectomics data.

Lot-Order Assignment Applying Priority Rules for the Single-Machine Total Tardiness Scheduling with Nonnegative Time-Dependent Processing Times

Directory of Open Access Journals (Sweden)

Jae-Gon Kim

2015-01-01

Full Text Available Lot-order assignment is to assign items in lots being processed to orders to fulfill the orders. It is usually performed periodically for meeting the due dates of orders especially in a manufacturing industry with a long production cycle time such as the semiconductor manufacturing industry. In this paper, we consider the lot-order assignment problem (LOAP with the objective of minimizing the total tardiness of the orders with distinct due dates. We show that we can solve the LOAP optimally by finding an optimal sequence for the single-machine total tardiness scheduling problem with nonnegative time-dependent processing times (SMTTSP-NNTDPT. Also, we address how the priority rules for the SMTTSP can be modified to those for the SMTTSP-NNTDPT to solve the LOAP. In computational experiments, we discuss the performances of the suggested priority rules and show the result of the proposed approach outperforms that of the commercial optimization software package.

Backbone and sidechain 1H, 13C and 15N resonance assignments of the human brain-type fatty acid binding protein (FABP7) in its apo form and the holo forms binding to DHA, oleic acid, linoleic acid and elaidic acid

DEFF Research Database (Denmark)

Oeemig, Jesper S; Jørgensen, Mathilde L; Hansen, Mikka S

2009-01-01

In this manuscript, we present the backbone and side chain assignments of human brain-type fatty acid binding protein, also known as FABP7, in its apo form and in four different holo forms, bound to DHA, oleic acid, linoleic acid and elaidic acid.......In this manuscript, we present the backbone and side chain assignments of human brain-type fatty acid binding protein, also known as FABP7, in its apo form and in four different holo forms, bound to DHA, oleic acid, linoleic acid and elaidic acid....

Separating boys and girls and increasing weight? Assessing the impacts of single-sex schools through random assignment in Seoul.

Science.gov (United States)

Choi, Jaesung; Park, Hyunjoon; Behrman, Jere R

2015-06-01

A growing body of research reports associations of school contexts with adolescents' weight and weight-related behaviors. One interesting, but under-researched, dimension of school context that potentially matters for adolescents' weight is the gender composition. If boys and girls are separated into single-sex schools, they might be less concerned about physical appearance, which may result in increased weight. Utilizing a unique setting in Seoul, Korea where students are randomly assigned to single-sex and coeducational schools within school districts, we estimate causal effects of single-sex schools on weight and weight-related behaviors. Our results show that students attending single-sex schools are more likely to be overweight, and that the effects are more pronounced for girls. We also find that girls in single-sex schools are less likely to engage in strenuous activities than their coeducational counterparts. Copyright © 2015 Elsevier Ltd. All rights reserved.

Web-Based Problem-Solving Assignment and Grading System

Science.gov (United States)

Brereton, Giles; Rosenberg, Ronald

2014-11-01

In engineering courses with very specific learning objectives, such as fluid mechanics and thermodynamics, it is conventional to reinforce concepts and principles with problem-solving assignments and to measure success in problem solving as an indicator of student achievement. While the modern-day ease of copying and searching for online solutions can undermine the value of traditional assignments, web-based technologies also provide opportunities to generate individualized well-posed problems with an infinite number of different combinations of initial/final/boundary conditions, so that the probability of any two students being assigned identical problems in a course is vanishingly small. Such problems can be designed and programmed to be: single or multiple-step, self-grading, allow students single or multiple attempts; provide feedback when incorrect; selectable according to difficulty; incorporated within gaming packages; etc. In this talk, we discuss the use of a homework/exam generating program of this kind in a single-semester course, within a web-based client-server system that ensures secure operation.

Single Point Incremental Forming using a Dummy Sheet

DEFF Research Database (Denmark)

Skjødt, Martin; Silva, Beatriz; Bay, Niels

2007-01-01

A new version of single point incremental forming (SPIF) is presented. This version includes a dummy sheet on top of the work piece, thus forming two sheets instead of one. The dummy sheet, which is in contact with the rotating tool pin, is discarded after forming. The new set-up influences....... The possible influence of friction between the two sheets is furthermore investigated. The results show that the use of a dummy sheet reduces wear of the work piece to almost zero, but also causes a decrease in formability. Bulging of the planar sides of the pyramid is reduced and surface roughness...

Single point incremental forming: Formability of PC sheets

Science.gov (United States)

Formisano, A.; Boccarusso, L.; Carrino, L.; Lambiase, F.; Minutolo, F. Memola Capece

2018-05-01

Recent research on Single Point Incremental Forming of polymers has slightly covered the possibility of expanding the materials capability window of this flexible forming process beyond metals, by demonstrating the workability of thermoplastic polymers at room temperature. Given the different behaviour of polymers compared to metals, different aspects need to be deepened to better understand the behaviour of these materials when incrementally formed. Thus, the aim of the work is to investigate the formability of incrementally formed polycarbonate thin sheets. To this end, an experimental investigation at room temperature was conducted involving formability tests; varying wall angle cone and pyramid frusta were manufactured by processing polycarbonate sheets with different thicknesses and using tools with different diameters, in order to draw conclusions on the formability of polymer sheets through the evaluation of the forming angles and the observation of the failure mechanisms.

Competitive Traffic Assignment in Road Networks

Directory of Open Access Journals (Sweden)

Krylatov Alexander Y.

2016-09-01

Full Text Available Recently in-vehicle route guidance and information systems are rapidly developing. Such systems are expected to reduce congestion in an urban traffic area. This social benefit is believed to be reached by imposing the route choices on the network users that lead to the system optimum traffic assignment. However, guidance service could be offered by different competitive business companies. Then route choices of different mutually independent groups of users may reject traffic assignment from the system optimum state. In this paper, a game theoretic approach is shown to be very efficient to formalize competitive traffic assignment problem with various groups of users in the form of non-cooperative network game with the Nash equilibrium search. The relationships between the Wardrop’s system optimum associated with the traffic assignment problem and the Nash equilibrium associated with the competitive traffic assignment problem are investigated. Moreover, some related aspects of the Nash equilibrium and the Wardrop’s user equilibrium assignments are also discussed.

DNATCO: assignment of DNA conformers at dnatco.org.

Science.gov (United States)

Černý, Jiří; Božíková, Paulína; Schneider, Bohdan

2016-07-08

The web service DNATCO (dnatco.org) classifies local conformations of DNA molecules beyond their traditional sorting to A, B and Z DNA forms. DNATCO provides an interface to robust algorithms assigning conformation classes called NTC: to dinucleotides extracted from DNA-containing structures uploaded in PDB format version 3.1 or above. The assigned dinucleotide NTC: classes are further grouped into DNA structural alphabet NTA: , to the best of our knowledge the first DNA structural alphabet. The results are presented at two levels: in the form of user friendly visualization and analysis of the assignment, and in the form of a downloadable, more detailed table for further analysis offline. The website is free and open to all users and there is no login requirement. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Maass Cusp Forms on Singly Punctured Two-Torus

International Nuclear Information System (INIS)

Siddig, Abubaker Ahmed Mohamed; Shah, Nurisya Mohd; Zainuddin, Hishamuddin

2009-01-01

Quantum mechanical systems on punctured surfaces modeled by hyperbolic spaces can play an interesting role in exploring quantum chaos and in studying behaviour of future quantum nano-devices. The case of singly-punctured two-torus, for example, has been well-studied in the literature particularly for its scattering states. However, the bound states on the punctured torus given by Maass cusp forms are lesser known. In this note, we report on the algorithm of numerically computing these functions and we present ten lower-lying eigenvalues for each odd and even Maass cusp forms.

Optimal Due Date Assignment and Resource Allocation to Minimize the Weighted Number of Tardy Jobs on a Single Machine

OpenAIRE

Dvir Shabtay; George Steiner

2007-01-01

With the increased emphasis on the effective management of operational issues in supply chains, the timely delivery of products has become even more important. Companies have to quote attainable delivery dates and then meet these, or face large tardiness penalties. We study systems that can be modeled by single-machine scheduling problems with due date assignment and controllable job-processing times, which are either linear or convex functions of the amount of a continuously divisible and no...

Strategy-Proof Assignment Of Multiple Resources

DEFF Research Database (Denmark)

Erlanson, Albin; Szwagrzak, Karol

2015-01-01

We examine the strategy-proof allocation of multiple resources; an application is the assignment of packages of tasks, workloads, and compensations among the members of an organization. In the domain of multidimensional single-peaked preferences, we find that any allocation mechanism obtained by ...

An automated framework for NMR resonance assignment through simultaneous slice picking and spin system forming

KAUST Repository

Abbas, Ahmed; Guo, Xianrong; Jing, Bingyi; Gao, Xin

2014-01-01

positives and negatives impair the performance of resonance assignment methods. One of the main reasons for this problem is that the computational research community often considers peak picking and resonance assignment to be two separate problems, whereas

A panel of 130 autosomal single-nucleotide polymorphisms for ancestry assignment in five Asian populations and in Caucasians.

Science.gov (United States)

Hwa, Hsiao-Lin; Lin, Chih-Peng; Huang, Tsun-Ying; Kuo, Po-Hsiu; Hsieh, Wei-Hsin; Lin, Chun-Yen; Yin, Hsiang-I; Tseng, Li-Hui; Lee, James Chun-I

2017-06-01

Ancestry informative single-nucleotide polymorphism (AISNP) panels for differentiating between East and Southeast Asian populations are scarce. This study aimed to identify AISNPs for ancestry assignment of five East and Southeast Asian populations, and Caucasians. We analyzed 145 autosomal SNPs of the 627 DNA samples from individuals of six populations (234 Taiwanese Han, 91 Filipinos, 79 Indonesians, 60 Thais, 71 Vietnamese, and 92 Caucasians) using arrays. The multiple logistic regression model and a multi-tier approach were used for ancestry classification. We observed that 130 AISNPs were effective for classifying the ethnic origins with fair accuracy. Among the 130 AISNPs, 122 were useful for stratification between these five Asian populations and 64 were effective for differentiating between Caucasians and these Asian populations. For differentiation between Caucasians and Asians, an accuracy rate of 100% was achieved in these 627 subjects with 50 optimal AISNPs among the 64 effective SNPs. For classification of the five Asian populations, the accuracy rates of ancestry inference using 20 to 57 SNPs for each of the two Asian populations ranged from 74.1% to 100%. Another 14 degraded DNA samples with incomplete profiling were analyzed, and the ancestry of 12 (85.7%) of those subjects was accurately assigned. We developed a 130-AISNP panel for ethnic origin differentiation between the five East and Southeast Asian populations and Caucasians. This AISNP set may be helpful for individual ancestral assignment of these populations in forensic casework.

Revisiting the fundamentals of single point incremental forming by

DEFF Research Database (Denmark)

Silva, Beatriz; Skjødt, Martin; Martins, Paulo A.F.

2008-01-01

Knowledge of the physics behind the fracture of material at the transition between the inclined wall and the corner radius of the sheet is of great importance for understanding the fundamentals of single point incremental forming (SPIF). How the material fractures, what is the state of strain...

Single point incremental forming of tailored blanks produced by friction stir welding

DEFF Research Database (Denmark)

Silva, M.B.; Skjødt, Martin; Vilaca, P.

2009-01-01

fromthe rotating single point-forming tool. Formability of the tailor welded blanks (TWB) is evaluated by means of benchmark tests carried out on truncated conical and pyramidal shapes and results are compared with similar tests performed on conventional reference blanks of the same material. Results show......This paper is focused on the single point incremental forming (SPIF) of tailored welded blanks produced by friction stirwelding (FSW). Special emphasis is placed on the know-how for producing the tailored blanks and on the utilization of innovative forming strategies to protect thewelding joint...... that the combination of SPIF with tailored welded blanks produced by FSW seems promising in the manufacture of complex sheet metal parts with high depths....

The kinetics of chirality assignment in catalytic single-walled carbon nanotube growth and the routes towards selective growth.

Science.gov (United States)

Xu, Ziwei; Qiu, Lu; Ding, Feng

2018-03-21

Depending on its specific structure, or so-called chirality, a single-walled carbon nanotube (SWCNT) can be either a conductor or a semiconductor. This feature ensures great potential for building ∼1 nm sized electronics if chirality-selected SWCNTs could be achieved. However, due to the limited understanding of the growth mechanism of SWCNTs, reliable methods for chirality-selected SWCNTs are still pending. Here we present a theoretical model on the chirality assignment and control of SWCNTs during the catalytic growth. This study reveals that the chirality of a SWCNT is determined by the kinetic incorporation of pentagons, especially the last (6 th ) one, during the nucleation stage. Our analysis showed that the chirality of a SWCNT is randomly assigned on a liquid or liquid-like catalyst surface, and two routes of synthesizing chirality-selected SWCNTs, which are verified by recent experimental achievements, are demonstrated. They are (i) by using high melting point crystalline catalysts, such as Ta, W, Re, Os, or their alloys, and (ii) by frequently changing the chirality of SWCNTs during their growth. This study paves the way for achieving chirality-selective SWCNT growth for high performance SWCNT based electronics.

The edge complex: implicit memory for figure assignment in shape perception.

Science.gov (United States)

Peterson, Mary A; Enns, James T

2005-05-01

Viewing a stepped edge is likely to prompt the perceptual assignment of one side of the edge as figure. This study demonstrates that even a single brief glance at a novel edge gives rise to an implicit memory regarding which side was seen as figure; this edge complex enters into the figure assignment process the next time the edge is encountered, both speeding same-different judgments when the figural side is repeated and slowing these judgments when the new figural side is identical to the former ground side (Experiments 1A and 1B). These results were obtained even when the facing direction of the repeated edge was mirror reversed (Experiment 2). This study shows that implicit measures can reveal the effects of past experience on figure assignment, following a single prior exposure to a novel shape, and supports a competitive model of figure assignment in which past experience serves as one of many figural cues.

A Case-Study Assignment to Teach Theoretical Perspectives in Abnormal Psychology.

Science.gov (United States)

Perkins, David V.

1991-01-01

Describes an assignment that requires students to organize, prepare, and revise a case study in abnormal behavior. Explains that students employ a single theoretical perspective in preparing a report on a figure from history, literature, the arts, or current events. Discusses the value of the assignment for students. (SG)

Proposed criteria for the evaluation of an address assignment scheme in Botswana

CSIR Research Space (South Africa)

Ditsela, J

2011-06-01

Full Text Available propose criteria for an address assignment scheme in Botswana: a single set of place or area names; different addresses types for urban, rural and farm areas; principles for address numbering assignment; integration of different referencing systems; and a...

Plastic forming simulation analysis of marine engine crankshaft single-throw

Directory of Open Access Journals (Sweden)

LIU Peipei

2016-08-01

Full Text Available The research object is for marine engine crankshaft single-throw.A 3D model of the crankshaft single-throw blank and die in forging process is established by SolidWorks software,then the 3D model is imported into metal plastic forming CAE software DEFROM-3D to carry on the plastic forming simulation,to verify the relationship between the internal flow stress and the external deformation conditions in the process of metal plastic deformation under different strain rate and temperature,and to carry on the scientific analysis based on the obtained data.The result shows that the preset temperature is higher,the stress-strain curve is relatively lower when the strain rate is constant.Sample internal flow stress will be greater and the resistance to fatigue strength will be poorer at a higher strain rate when the temperature of the blank is constant.The result also provides a theoretical basis for further optimization design.

Strategies and limits in multi-stage single-point incremental forming

DEFF Research Database (Denmark)

Skjødt, Martin; Silva, M.B.; Martins, P. A. F.

2010-01-01

paths. The results also reveal that the sequence of multi-stage forming has a large effect on the location of strain points in the principal strain space. Strain paths are linear in the first stage and highly non-linear in the subsequent forming stages. The overall results show that the experimentally......Multi-stage single-point incremental forming (SPIF) is a state-of-the-art manufacturing process that allows small-quantity production of complex sheet metal parts with vertical walls. This paper is focused on the application of multi-stage SPIF with the objective of producing cylindrical cups......-limit curves and fracture forming-limit curves (FFLCs), numerical simulation, and experimentation, namely the evaluation of strain paths and fracture strains in actual multi-stage parts. Assessment of numerical simulation with experimentation shows good agreement between computed and measured strain and strain...

Sequence-specific 1H NMR resonance assignments of Bacillus subtilis HPr: Use of spectra obtained from mutants to resolve spectral overlap

International Nuclear Information System (INIS)

Wittekind, M.; Klevit, R.E.; Reizer, J.

1990-01-01

On the basis of an analysis of two-dimensional 1 H NMR spectra, the complete sequence-specific 1 H NMR assignments are presented for the phosphocarrier protein HPr from the Gram-positive bacterium Bacillus subtilis. During the assignment procedure, extensive use was made of spectra obtained from point mutants of HPr in order to resolve spectral overlap and to provide verification of assignments. Regions of regular secondary structure were identified by characteristic patterns of sequential backbone proton NOEs and slowly exchanging amide protons. B subtilis HPr contains four β-strands that form a single antiparallel β-sheet and two well-defined α-helices. There are two stretches of extended backbone structure, one of which contains the active site His 15 . The overall fold of the protein is very similar to that of Escherichia coli HPr determined by NMR studies

Single-Spin Polarization Effects and the Determination of Timelike Proton Form Factors

Energy Technology Data Exchange (ETDEWEB)

Brodsky, S

2003-10-24

We show that measurements of the proton's polarization in e{sup +}e{sup -} {yields} p{bar p} strongly discriminate between analytic forms of models which fit the proton form factors in the spacelike region. In particular, the single-spin asymmetry normal to the scattering plane measures the relative phase difference between the timelike G{sub E} and G{sub M} form factors. The expected proton polarization in the timelike region is large, of order of several tens of percent.

Substructuring in the implicit simulation of single point incremental sheet forming

NARCIS (Netherlands)

Hadoush, A.; van den Boogaard, Antonius H.

2009-01-01

This paper presents a direct substructuring method to reduce the computing time of implicit simulations of single point incremental forming (SPIF). Substructuring is used to divide the finite element (FE) mesh into several non-overlapping parts. Based on the hypothesis that plastic deformation is

ActionMap: A web-based software that automates loci assignments to framework maps.

Science.gov (United States)

Albini, Guillaume; Falque, Matthieu; Joets, Johann

2003-07-01

Genetic linkage computation may be a repetitive and time consuming task, especially when numerous loci are assigned to a framework map. We thus developed ActionMap, a web-based software that automates genetic mapping on a fixed framework map without adding the new markers to the map. Using this tool, hundreds of loci may be automatically assigned to the framework in a single process. ActionMap was initially developed to map numerous ESTs with a small plant mapping population and is limited to inbred lines and backcrosses. ActionMap is highly configurable and consists of Perl and PHP scripts that automate command steps for the MapMaker program. A set of web forms were designed for data import and mapping settings. Results of automatic mapping can be displayed as tables or drawings of maps and may be exported. The user may create personal access-restricted projects to store raw data, settings and mapping results. All data may be edited, updated or deleted. ActionMap may be used either online or downloaded for free (http://moulon.inra.fr/~bioinfo/).

The ICAP (Interactive Course Assignment Pages Publishing System

Directory of Open Access Journals (Sweden)

Kim Griggs

2008-03-01

Full Text Available The ICAP publishing system is an open source custom content management system that enables librarians to easily and quickly create and manage library help pages for course assignments (ICAPs, without requiring knowledge of HTML or other web technologies. The system's unique features include an emphasis on collaboration and content reuse and an easy-to-use interface that includes in-line help, simple forms and drag and drop functionality. The system generates dynamic, attractive course assignment pages that blend Web 2.0 features with traditional library resources, and makes the pages easier to find by providing a central web page for the course assignment pages. As of December 2007, the code is available as free, open-source software under the GNU General Public License.

48 CFR 245.7101-3 - DD Form 1348-1, DoD Single Line Item Release/Receipt Document.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false DD Form 1348-1, DoD Single Line Item Release/Receipt Document. 245.7101-3 Section 245.7101-3 Federal Acquisition Regulations... PROPERTY Plant Clearance Forms 245.7101-3 DD Form 1348-1, DoD Single Line Item Release/Receipt Document...

Dynamic online peer evaluations to improve group assignments in nursing e-learning environment.

Science.gov (United States)

Adwan, Jehad

2016-06-01

The purpose of this research was to evaluate the use of online peer evaluation forms for online group activities in improving group project outcomes. The investigator developed and used a web-based Google Forms® self and peer evaluation form of 2 group assignments' rubric for junior and senior nursing students. The form covered elements of the assignments including: research activity, analysis of the literature, writing of report, participation in making of presentation, overall contribution to the project, and participation in the weekly group discussions. Items were rated from 1 (did not contribute) to 5 (outstanding contribution) in addition to NA when one activity did not apply. The self and peer evaluation process was conducted twice: once after group assignment 1 and once after group assignment 2. The group assignments final products were done in the form of VoiceThread online presentations that were shared with the rest of the class reflecting the groups' work on a health informatics topic of interest. Data collected as the students completed self and peer evaluations for group assignments 1 and 2. Also, optional comments regarding member performance were collected to add contextual information in addition to ratings. Students received credit for completing the peer evaluations and the grade for the particular assignment was affected by their performance based on peer evaluations of their contributions. Students' peer evaluations showed in a color-coded spreadsheet which enabled the course faculty to view real time results of students' ratings after each assignment. The faculty provided timely and tailored feedback to groups or individuals as needed, using positive feedback and commending high performance while urging struggling individual students and groups to improve lower ratings in specific areas. Comparing evaluations of both assignments, there were statistically significant improvements among all students. The mean scores of the entire sample were

Assigning breed origin to alleles in crossbred animals.

Science.gov (United States)

Vandenplas, Jérémie; Calus, Mario P L; Sevillano, Claudia A; Windig, Jack J; Bastiaansen, John W M

2016-08-22

For some species, animal production systems are based on the use of crossbreeding to take advantage of the increased performance of crossbred compared to purebred animals. Effects of single nucleotide polymorphisms (SNPs) may differ between purebred and crossbred animals for several reasons: (1) differences in linkage disequilibrium between SNP alleles and a quantitative trait locus; (2) differences in genetic backgrounds (e.g., dominance and epistatic interactions); and (3) differences in environmental conditions, which result in genotype-by-environment interactions. Thus, SNP effects may be breed-specific, which has led to the development of genomic evaluations for crossbred performance that take such effects into account. However, to estimate breed-specific effects, it is necessary to know breed origin of alleles in crossbred animals. Therefore, our aim was to develop an approach for assigning breed origin to alleles of crossbred animals (termed BOA) without information on pedigree and to study its accuracy by considering various factors, including distance between breeds. The BOA approach consists of: (1) phasing genotypes of purebred and crossbred animals; (2) assigning breed origin to phased haplotypes; and (3) assigning breed origin to alleles of crossbred animals based on a library of assigned haplotypes, the breed composition of crossbred animals, and their SNP genotypes. The accuracy of allele assignments was determined for simulated datasets that include crosses between closely-related, distantly-related and unrelated breeds. Across these scenarios, the percentage of alleles of a crossbred animal that were correctly assigned to their breed origin was greater than 90 %, and increased with increasing distance between breeds, while the percentage of incorrectly assigned alleles was always less than 2 %. For the remaining alleles, i.e. 0 to 10 % of all alleles of a crossbred animal, breed origin could not be assigned. The BOA approach accurately assigns

Failure mechanisms in single-point incremental forming of metals

DEFF Research Database (Denmark)

Silva, Maria B.; Nielsen, Peter Søe; Bay, Niels

2011-01-01

The last years saw the development of two different views on how failure develops in single-point incremental forming (SPIF). Today, researchers are split between those claiming that fracture is always preceded by necking and those considering that fracture occurs with suppression of necking. Each...... on formability limits and development of fracture. The unified view conciliates the aforementioned different explanations on the role of necking in fracture and is consistent with the experimental observations that have been reported in the past years. The work is performed on aluminium AA1050-H111 sheets...

Optimization of Single Point Incremental Forming of Al5052-O Sheet

Energy Technology Data Exchange (ETDEWEB)

Kim, Chan Il; Xiao, Xiao; Do, Van Cuong; Kim, Young Suk [Kyungpook Nat’l Univ., Daegu (Korea, Republic of)

2017-03-15

Single point incremental forming (SPIF) is a sheet-forming technique. It is a die-less sheet metal manufacturing process for rapid prototyping and small batch production. The Critical parameters in the forming process include tool diameter, step depth, feed rate, spindle speed, etc. In this study, these parameters and the die shape corresponding to the Varying Wall Angle Conical Frustum(VWACF) model were used for forming 0.8mm in thick Al5052-O sheets. The Taguchi method of Experiments of Design (DOE) and Grey relational optimization were used to determine the optimum parameters in SPIF. A response study was performed on formability, spring back, and thickness reduction. The research shows that the optimum combination of these parameters that yield best performance of SPIF is as follows: tool diameter, 6mm; spin speed, 60rpm; step depth, 0.3mm; and feed rate, 500mm/min.

Protein secondary structure assignment revisited: a detailed analysis of different assignment methods

Directory of Open Access Journals (Sweden)

de Brevern Alexandre G

2005-09-01

Full Text Available Abstract Background A number of methods are now available to perform automatic assignment of periodic secondary structures from atomic coordinates, based on different characteristics of the secondary structures. In general these methods exhibit a broad consensus as to the location of most helix and strand core segments in protein structures. However the termini of the segments are often ill-defined and it is difficult to decide unambiguously which residues at the edge of the segments have to be included. In addition, there is a "twilight zone" where secondary structure segments depart significantly from the idealized models of Pauling and Corey. For these segments, one has to decide whether the observed structural variations are merely distorsions or whether they constitute a break in the secondary structure. Methods To address these problems, we have developed a method for secondary structure assignment, called KAKSI. Assignments made by KAKSI are compared with assignments given by DSSP, STRIDE, XTLSSTR, PSEA and SECSTR, as well as secondary structures found in PDB files, on 4 datasets (X-ray structures with different resolution range, NMR structures. Results A detailed comparison of KAKSI assignments with those of STRIDE and PSEA reveals that KAKSI assigns slightly longer helices and strands than STRIDE in case of one-to-one correspondence between the segments. However, KAKSI tends also to favor the assignment of several short helices when STRIDE and PSEA assign longer, kinked, helices. Helices assigned by KAKSI have geometrical characteristics close to those described in the PDB. They are more linear than helices assigned by other methods. The same tendency to split long segments is observed for strands, although less systematically. We present a number of cases of secondary structure assignments that illustrate this behavior. Conclusion Our method provides valuable assignments which favor the regularity of secondary structure segments.

Single-spin precessing gravitational waveform in closed form

Science.gov (United States)

Lundgren, Andrew; O'Shaughnessy, R.

2014-02-01

In coming years, gravitational-wave detectors should find black hole-neutron star (BH-NS) binaries, potentially coincident with astronomical phenomena like short gamma ray bursts. These binaries are expected to precess. Gravitational-wave science requires a tractable model for precessing binaries, to disentangle precession physics from other phenomena like modified strong field gravity, tidal deformability, or Hubble flow; and to measure compact object masses, spins, and alignments. Moreover, current searches for gravitational waves from compact binaries use templates where the binary does not precess and are ill-suited for detection of generic precessing sources. In this paper we provide a closed-form representation of the single-spin precessing waveform in the frequency domain by reorganizing the signal as a sum over harmonics, each of which resembles a nonprecessing waveform. This form enables simple analytic calculations of the Fisher matrix for use in template bank generation and coincidence metrics, and jump proposals to improve the efficiency of Markov chain Monte Carlo sampling. We have verified that for generic BH-NS binaries, our model agrees with the time-domain waveform to 2%. Straightforward extensions of the derivations outlined here (and provided in full online) allow higher accuracy and error estimates.

Grouping puts figure-ground assignment in context by constraining propagation of edge assignment.

Science.gov (United States)

Brooks, Joseph L; Brook, Joseph L; Driver, Jon

2010-05-01

Figure-ground organization involves the assignment of edges to a figural shape on one or the other side of each dividing edge. Established visual cues for edge assignment primarily concern relatively local rather than contextual factors. In the present article, we show that an assignment for a locally unbiased edge can be affected by an assignment of a remote contextual edge that has its own locally biased assignment. We find that such propagation of edge assignment from the biased remote context occurs only when the biased and unbiased edges are grouped. This new principle, whereby grouping constrains the propagation of figural edge assignment, emerges from both subjective reports and an objective short-term edge-matching task. It generalizes from moving displays involving grouping by common fate and collinearity, to static displays with grouping by similarity of edge-contrast polarity, or apparent occlusion. Our results identify a new contextual influence on edge assignment. They also identify a new mechanistic relation between grouping and figure-ground processes, whereby grouping between remote elements can constrain the propagation of edge assignment between those elements. Supplemental materials for this article may be downloaded from http://app.psychonomic-journals.org/content/supplemental.

Accuracy of Assignment of Atlantic Salmon (Salmo salar L.) to Rivers and Regions in Scotland and Northeast England Based on Single Nucleotide Polymorphism (SNP) Markers

Science.gov (United States)

Gilbey, John; Cauwelier, Eef; Coulson, Mark W.; Stradmeyer, Lee; Sampayo, James N.; Armstrong, Anja; Verspoor, Eric; Corrigan, Laura; Shelley, Jonathan; Middlemas, Stuart

2016-01-01

Understanding the habitat use patterns of migratory fish, such as Atlantic salmon (Salmo salar L.), and the natural and anthropogenic impacts on them, is aided by the ability to identify individuals to their stock of origin. Presented here are the results of an analysis of informative single nucleotide polymorphic (SNP) markers for detecting genetic structuring in Atlantic salmon in Scotland and NE England and their ability to allow accurate genetic stock identification. 3,787 fish from 147 sites covering 27 rivers were screened at 5,568 SNP markers. In order to identify a cost-effective subset of SNPs, they were ranked according to their ability to differentiate between fish from different rivers. A panel of 288 SNPs was used to examine both individual assignments and mixed stock fisheries and eighteen assignment units were defined. The results improved greatly on previously available methods and, for the first time, fish caught in the marine environment can be confidently assigned to geographically coherent units within Scotland and NE England, including individual rivers. As such, this SNP panel has the potential to aid understanding of the various influences acting upon Atlantic salmon on their marine migrations, be they natural environmental variations and/or anthropogenic impacts, such as mixed stock fisheries and interactions with marine power generation installations. PMID:27723810

FLEET ASSIGNMENT MODELLING

Directory of Open Access Journals (Sweden)

2016-01-01

Full Text Available The article is devoted to the airline scheduling process and methods of its modeling. This article describes the main stages of airline scheduling process (scheduling, fleet assignment, revenue management, operations, their features and interactions. The main part of scheduling process is fleet assignment. The optimal solution of the fleet assignment problem enables airlines to increase their incomes up to 3 % due to quality improving of connections and execution of the planned number of flights operated by less number of aircraft than usual or planned earlier. Fleet assignment of scheduling process is examined and Conventional Leg-Based Fleet Assignment Model is analyzed. Finally strong and weak aspects of the model (SWOT are released and applied. The article gives a critical analysis of FAM model, with the purpose of identi- fying possible options and constraints of its use (for example, in cases of short-term and long-term planning, changing the schedule or replacing the aircraft, as well as possible ways to improve the model.

24 CFR 203.477 - Certificate by lender when loan assigned.

Science.gov (United States)

2010-04-01

... AUTHORITIES SINGLE FAMILY MORTGAGE INSURANCE Contract Rights and Obligations Rehabilitation Loans § 203.477... a good right to assign. (c) The mortgage transaction did not involve a first mortgage and the mortgage is prior to all mechanics' and materialmen's liens filed of record, regardless of when such liens...

Proposed method for assigning metric tons of heavy metal values to defense high-level waste forms to be disposed of in a geologic repository

International Nuclear Information System (INIS)

1987-08-01

A proposed method is described for assigning an equivalent metric ton heavy metal (eMTHM) value to defense high-level waste forms to be disposed of in a geologic repository. This method for establishing a curie equivalency between defense high-level waste and irradiated commercial fuel is based on the ratio of defense fuel exposure to the typical commercial fuel exposure, MWd/MTHM. application of this technique to defense high-level wastes is described. Additionally, this proposed technique is compared to several alternate calculations for eMTHM. 15 refs., 2 figs., 10 tabs

Symmetric Logic Synthesis with Phase Assignment

OpenAIRE

Benschop, N. F.

2001-01-01

Decomposition of any Boolean Function BF_n of n binary inputs into an optimal inverter coupled network of Symmetric Boolean functions SF_k (k \\leq n) is described. Each SF component is implemented by Threshold Logic Cells, forming a complete and compact T-Cell Library. Optimal phase assignment of input polarities maximizes local symmetries. The "rank spectrum" is a new BF_n description independent of input ordering, obtained by mapping its minterms onto an othogonal n \\times n grid of (transi...

Effects of Role and Assignment Rationale on Attitudes Formed During Peer Tutoring

Science.gov (United States)

Bierman, Karen Linn; Furman, Wyndol

2012-01-01

This study examined the role of contextual factors, such as assignment rationale, on the attitudinal effects of peer tutoring. Fourth-grade children engaged in brief tutoring experiences as either a tutor or tutee. Subjects received four rationales for being selected as tutor or tutee: (a) a competence rationale, (b) a physical characteristic rationale, (c) a chance rationale, or (d) no rationale. As predicted, tutors had more positive attitudes than tutees when they had been given a competence or physical characteristic rationale but not when the tutors were provided a chance rationale or no rationale. Additionally, the tutors’ and tutees’ attitudes were enhanced when no rationale was provided. Results are discussed in terms of their implications for a role-theory analysis of tutoring and their implications for applied programs. PMID:23946549

Land cover in single-family housing areas and how it correlates with urban form

DEFF Research Database (Denmark)

Nielsen, Mette Boye; Jensen, Marina Bergen

2015-01-01

Land cover composition is a valuable indicator of the ecological performance of a city. Single-family housing areas constitute a substantial part of most cities and may as such play an important role for sustainable urban development. From aerial photos we performed detailed GIS-based mapping...... of land cover in three detached single-family housing areas in Denmark of different urban form but comparable housing densities (ranging from 10.0 to 11.3 houses per hectare). The findings were subjected to statistical analysis and landscape metrics. Land cover varied with urban form: A traditional...... spatial configuration with rectangular parcels contained significantly more vegetation and less impervious surfaces per parcel than newer Radburn-inspired configurations with more quadratic parcels. Correlation analysis showed size of paved access ways to be positively correlated with distance from road...

Intensity assignments from historical earthquake data: issues of certainty and quality

Directory of Open Access Journals (Sweden)

R. M. W. Musson

1998-06-01

Full Text Available The use of macroseismic data in assessing parameters for historical earthquakes for use in seismic hazard assessment has thrown more attention on the way in which these data are treated. The processes involved in selecting which macroseismic data from a historical earthquake survive to the present day can be modelled as a series of filters, most of which are outside the control of the seismologist/historian, and which cause distortion in the resulting picture of the earthquake. The ways in which the data become distorted should be taken into account when interpreting the data as intensity values. One can usefully discriminate between the certainty of an intensity assignment (how well the data fits the scale and the quality of an intensity assignment (how well one can trust that the value is a true reflection of what really happened. The expression of uncertainty is usually in the form of ranged intensity values; the expression of quality requires an extra symbol or rating of some sort. A system is presented for three types of quality problems: reliability of intensity assessment, locational certainty or uncertainty, and veracity of the original data. Each of these is treated as a binary variable, giving a final quality code ranging from 0 (best to 7 (worst. This single integer quality code preserves three types of information which can then be expanded as required by computer programs designed to handle macroseismic data.

UOP LDR 300 All Assignments New

OpenAIRE

ADMIN

2018-01-01

UOP LDR 300 All Assignments New Check this A+ tutorial guideline at http://www.ldr300assignment.com/ldr-300-uop/ldr-300-all-assignments-latest For more classes visit http://www.ldr300assignment.com LDR 300 Week 1 Assignment Leadership Assessment (2 Papers) LDR 300 Week 2 Assignment Leadership Theories Matrix (2 Set) LDR 300 Week 2 Assignment Formulating Leadership Part I (2 Papers) LDR 300 Week 3 Assignment Interaction and Influence Amo...

Applications of random forest feature selection for fine-scale genetic population assignment.

Science.gov (United States)

Sylvester, Emma V A; Bentzen, Paul; Bradbury, Ian R; Clément, Marie; Pearce, Jon; Horne, John; Beiko, Robert G

2018-02-01

Genetic population assignment used to inform wildlife management and conservation efforts requires panels of highly informative genetic markers and sensitive assignment tests. We explored the utility of machine-learning algorithms (random forest, regularized random forest and guided regularized random forest) compared with F ST ranking for selection of single nucleotide polymorphisms (SNP) for fine-scale population assignment. We applied these methods to an unpublished SNP data set for Atlantic salmon ( Salmo salar ) and a published SNP data set for Alaskan Chinook salmon ( Oncorhynchus tshawytscha ). In each species, we identified the minimum panel size required to obtain a self-assignment accuracy of at least 90% using each method to create panels of 50-700 markers Panels of SNPs identified using random forest-based methods performed up to 7.8 and 11.2 percentage points better than F ST -selected panels of similar size for the Atlantic salmon and Chinook salmon data, respectively. Self-assignment accuracy ≥90% was obtained with panels of 670 and 384 SNPs for each data set, respectively, a level of accuracy never reached for these species using F ST -selected panels. Our results demonstrate a role for machine-learning approaches in marker selection across large genomic data sets to improve assignment for management and conservation of exploited populations.

Solving multiconstraint assignment problems using learning automata.

Science.gov (United States)

Horn, Geir; Oommen, B John

2010-02-01

This paper considers the NP-hard problem of object assignment with respect to multiple constraints: assigning a set of elements (or objects) into mutually exclusive classes (or groups), where the elements which are "similar" to each other are hopefully located in the same class. The literature reports solutions in which the similarity constraint consists of a single index that is inappropriate for the type of multiconstraint problems considered here and where the constraints could simultaneously be contradictory. This feature, where we permit possibly contradictory constraints, distinguishes this paper from the state of the art. Indeed, we are aware of no learning automata (or other heuristic) solutions which solve this problem in its most general setting. Such a scenario is illustrated with the static mapping problem, which consists of distributing the processes of a parallel application onto a set of computing nodes. This is a classical and yet very important problem within the areas of parallel computing, grid computing, and cloud computing. We have developed four learning-automata (LA)-based algorithms to solve this problem: First, a fixed-structure stochastic automata algorithm is presented, where the processes try to form pairs to go onto the same node. This algorithm solves the problem, although it requires some centralized coordination. As it is desirable to avoid centralized control, we subsequently present three different variable-structure stochastic automata (VSSA) algorithms, which have superior partitioning properties in certain settings, although they forfeit some of the scalability features of the fixed-structure algorithm. All three VSSA algorithms model the processes as automata having first the hosting nodes as possible actions; second, the processes as possible actions; and, third, attempting to estimate the process communication digraph prior to probabilistically mapping the processes. This paper, which, we believe, comprehensively reports the

A feedback model of figure-ground assignment.

Science.gov (United States)

Domijan, Drazen; Setić, Mia

2008-05-30

A computational model is proposed in order to explain how bottom-up and top-down signals are combined into a unified perception of figure and background. The model is based on the interaction between the ventral and the dorsal stream. The dorsal stream computes saliency based on boundary signals provided by the simple and the complex cortical cells. Output from the dorsal stream is projected to the surface network which serves as a blackboard on which the surface representation is formed. The surface network is a recurrent network which segregates different surfaces by assigning different firing rates to them. The figure is labeled by the maximal firing rate. Computer simulations showed that the model correctly assigns figural status to the surface with a smaller size, a greater contrast, convexity, surroundedness, horizontal-vertical orientation and a higher spatial frequency content. The simple gradient of activity in the dorsal stream enables the simulation of the new principles of the lower region and the top-bottom polarity. The model also explains how the exogenous attention and the endogenous attention may reverse the figural assignment. Due to the local excitation in the surface network, neural activity at the cued region will spread over the whole surface representation. Therefore, the model implements the object-based attentional selection.

An abbreviated SNP panel for ancestry assignment of honeybees (Apis mellifera)

Science.gov (United States)

This paper examines whether an abbreviated panel of 37 single nucleotide polymorphisms (SNPs) has the same power as a larger and more expensive panel of 95 SNPs to assign ancestry of honeybees (Apis mellifera) to three ancestral lineages. We selected 37 SNPs from the original 95 SNP panel using alle...

Ring resonator-based single-chip 1x8 optical beam forming network in LPCVD waveguide technology

NARCIS (Netherlands)

Zhuang, L.; Roeloffzen, C.G.H.; Heideman, Rene; Borreman, A.; Meijerink, Arjan; van Etten, Wim; Koonen, A.M.J.; Leijtens, X.J.M.; van den Boom, H.P.A.; Verdurmen, E.J.M.; Molina Vázquez, J.

2006-01-01

Optical ring resonators (ORRs) are good candidates to provide continuously tunable delay in beam forming networks (BFNs) for phased array antenna systems. Delay and splitting/combining elements can be integrated on a single optical chip to form an OBFN. A state-of-the-art 1×8 OBFN chip has been

A single thiazole orange molecule forms an exciplex in a DNA i-motif.

Science.gov (United States)

Xu, Baochang; Wu, Xiangyang; Yeow, Edwin K L; Shao, Fangwei

2014-06-18

A fluorescent exciplex of thiazole orange (TO) is formed in a single-dye conjugated DNA i-motif. The exciplex fluorescence exhibits a large Stokes shift, high quantum yield, robust response to pH oscillation and little structural disturbance to the DNA quadruplex, which can be used to monitor the folding of high-order DNA structures.

Plagiarism-Proofing Assignments

Science.gov (United States)

Johnson, Doug

2004-01-01

Mr. Johnson has discovered that the higher the level of student engagement and creativity, the lower the probability of plagiarism. For teachers who would like to see such desirable results, he describes the characteristics of assignments that are most likely to produce them. Two scenarios of types of assignments that avoid plagiarism are…

Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres

Science.gov (United States)

Gissibl, Timo; Thiele, Simon; Herkommer, Alois; Giessen, Harald

2016-01-01

Micro-optics are widely used in numerous applications, such as beam shaping, collimation, focusing and imaging. We use femtosecond 3D printing to manufacture free-form micro-optical elements. Our method gives sub-micrometre accuracy so that direct manufacturing even on single-mode fibres is possible. We demonstrate the potential of our method by writing different collimation optics, toric lenses, free-form surfaces with polynomials of up to 10th order for intensity beam shaping, as well as chiral photonic crystals for circular polarization filtering, all aligned onto the core of the single-mode fibres. We determine the accuracy of our optics by analysing the output patterns as well as interferometrically characterizing the surfaces. We find excellent agreement with numerical calculations. 3D printing of microoptics can achieve sufficient performance that will allow for rapid prototyping and production of beam-shaping and imaging devices. PMID:27339700

Natural abundance 15N NMR assignments delineate structural differences between intact and reactive-site hydrolyzed Cucurbita maxima trypsin inhibitor III.

Science.gov (United States)

Krishnamoorthi, R; Nemmers, S; Tobias, B

1992-06-15

15N NMR assignments were made to the backbone amide nitrogen atoms at natural isotopic abundance of intact and reactive-site (Arg5-Ile6) hydrolyzed Cucurbita maxima trypsin inhibitor III (CMTI-III and CMTI-III*, respectively) by means of 2D proton-detected heteronuclear single bond chemical shift correlation (HSBC) spectroscopy, utilizing the previously made sequence-specific 1H NMR assignments (Krishnamoorthi et al. (1992) Biochemistry 31, 898-904). Comparison of the 15N chemical shifts of the two forms of the inhibitor molecule revealed significant changes not only for residues located near the reactive-site region, but also for those distantly located. Residues Cys3, Arg5, Leu7, Met8, Cys10, Cys16, Glu19, His25, Tyr27, Cys28 and Gly29 showed significant chemical shift changes ranging from 0.3 to 6.1 ppm, thus indicating structural perturbations that were transmitted throughout the molecule. These findings confirm the earlier conclusions based on 1H NMR investigations.

Single-cell printing to form three-dimensional lines of olfactory ensheathing cells

International Nuclear Information System (INIS)

Othon, Christina M; Ringeisen, Bradley R; Wu Xingjia; Anders, Juanita J

2008-01-01

Biological laser printing (BioLP(TM)) is a unique tool capable of printing high resolution two- and three-dimensional patterns of living mammalian cells, with greater than 95% viability. These results have been extended to primary cultured olfactory ensheathing cells (OECs), harvested from adult Sprague-Dawley rats. OECs have been found to provide stimulating environments for neurite outgrowth in spinal cord injury models. BioLP is unique in that small load volumes (∼μLs) are required to achieve printing, enabling low numbers of OECs to be harvested, concentrated and printed. BioLP was used to form several 8 mm lines of OECs throughout a multilayer hydrogel scaffold. The line width was as low as 20 μm, with most lines comprising aligned single cells. Fluorescent confocal microscopy was used to determine the functionality of the printed OECs, to monitor interactions between printed OECs, and to determine the extent of cell migration throughout the 3D scaffold. High-resolution printing of low cell count, harvested OECs is an important advancement for in vitro study of cell interactions and functionality. In addition, these cell-printed scaffolds may provide an alternative for spinal cord repair studies, as the single-cell patterns formed here are on relevant size scales for neurite outgrowth

Single-chip ring resonator-based 1 x 8 optical beam forming network in CMOS-compatible waveguide technology

NARCIS (Netherlands)

Zhuang, L.; Roeloffzen, C.G.H.; Heideman, Rene; Borreman, A.; Meijerink, Arjan; van Etten, Wim

2007-01-01

Optical ring resonators (ORRs) are good candidates to provide continuously tunable delay in optical beam forming networks (OBFNs) for phased array antenna systems. Delay and splitting/combining elements can be integrated on a single optical chip to form an OBFN. A state-of-the-art ring resonator-

Control of anisotropic shape deviation in single point incremental forming of paperboard

Science.gov (United States)

Stein, Philipp; Franke, Wilken; Hoppe, Florian; Hesse, Daniel; Mill, Katharina; Groche, Peter

2017-10-01

The increasing social demand for sustainable material use leads to new process strategies as well as to the use of new materials in nearly all industries. In light of this demand, paperboard shows potential to substitute polymer-based components while also exhibiting improved ecological properties. However, in contrast to polymer-based products, the forming limits of paperboard are relatively low. Therefore, three dimensional forming of paperboard is subject of current research. One area of research focuses on the control of the fiber orientation dependent anisotropic material behavior of industrial paperboard in forming processes. For an examined industrial paperboard, an average elongation at break of 1.2% in the so called machine direction (fiber preferential direction, MD) has been determined at standard climate conditions. In contrast, in cross-direction (orthogonal to the machine direction, CD) a value of 2.6% was observed. With increased moisture content of the specimens the difference between the mechanical properties in MD and CD even increases. As a result of the various fiber-orientation dependent mechanical properties, forming with symmetric tools leads to asymmetrically shaped final parts. Within this article, an approach to reduce the asymmetric shape of three-dimensional formed paperboard by using single point incremental forming technology is presented. For a free spatial processing strategy the 3D Servo Press Technology, which enables circular as well as free processing strategies, is used. Based on reference tests with a circular processing strategy, it is shown that by using an adapted, elliptical tool path, an almost symmetric shaped part can be formed.

Dynamic Sequence Assignment.

Science.gov (United States)

1983-12-01

D-136 548 DYNAMIIC SEQUENCE ASSIGNMENT(U) ADVANCED INFORMATION AND 1/2 DECISION SYSTEMS MOUNTAIN YIELW CA C A 0 REILLY ET AL. UNCLSSIIED DEC 83 AI/DS...I ADVANCED INFORMATION & DECISION SYSTEMS Mountain View. CA 94040 84 u ,53 V,..’. Unclassified _____ SCURITY CLASSIFICATION OF THIS PAGE REPORT...reviews some important heuristic algorithms developed for fas- ter solution of the sequence assignment problem. 3.1. DINAMIC MOGRAMUNIG FORMULATION FOR

Epidemiological tracking and population assignment of the non-clonal bacterium, Burkholderia pseudomallei.

Science.gov (United States)

Dale, Julia; Price, Erin P; Hornstra, Heidie; Busch, Joseph D; Mayo, Mark; Godoy, Daniel; Wuthiekanun, Vanaporn; Baker, Anthony; Foster, Jeffrey T; Wagner, David M; Tuanyok, Apichai; Warner, Jeffrey; Spratt, Brian G; Peacock, Sharon J; Currie, Bart J; Keim, Paul; Pearson, Talima

2011-12-01

Rapid assignment of bacterial pathogens into predefined populations is an important first step for epidemiological tracking. For clonal species, a single allele can theoretically define a population. For non-clonal species such as Burkholderia pseudomallei, however, shared allelic states between distantly related isolates make it more difficult to identify population defining characteristics. Two distinct B. pseudomallei populations have been previously identified using multilocus sequence typing (MLST). These populations correlate with the major foci of endemicity (Australia and Southeast Asia). Here, we use multiple Bayesian approaches to evaluate the compositional robustness of these populations, and provide assignment results for MLST sequence types (STs). Our goal was to provide a reference for assigning STs to an established population without the need for further computational analyses. We also provide allele frequency results for each population to enable estimation of population assignment even when novel STs are discovered. The ability for humans and potentially contaminated goods to move rapidly across the globe complicates the task of identifying the source of an infection or outbreak. Population genetic dynamics of B. pseudomallei are particularly complicated relative to other bacterial pathogens, but the work here provides the ability for broad scale population assignment. As there is currently no independent empirical measure of successful population assignment, we provide comprehensive analytical details of our comparisons to enable the reader to evaluate the robustness of population designations and assignments as they pertain to individual research questions. Finer scale subdivision and verification of current population compositions will likely be possible with genotyping data that more comprehensively samples the genome. The approach used here may be valuable for other non-clonal pathogens that lack simple group-defining genetic characteristics

Epidemiological tracking and population assignment of the non-clonal bacterium, Burkholderia pseudomallei.

Directory of Open Access Journals (Sweden)

Julia Dale

2011-12-01

Full Text Available Rapid assignment of bacterial pathogens into predefined populations is an important first step for epidemiological tracking. For clonal species, a single allele can theoretically define a population. For non-clonal species such as Burkholderia pseudomallei, however, shared allelic states between distantly related isolates make it more difficult to identify population defining characteristics. Two distinct B. pseudomallei populations have been previously identified using multilocus sequence typing (MLST. These populations correlate with the major foci of endemicity (Australia and Southeast Asia. Here, we use multiple Bayesian approaches to evaluate the compositional robustness of these populations, and provide assignment results for MLST sequence types (STs. Our goal was to provide a reference for assigning STs to an established population without the need for further computational analyses. We also provide allele frequency results for each population to enable estimation of population assignment even when novel STs are discovered. The ability for humans and potentially contaminated goods to move rapidly across the globe complicates the task of identifying the source of an infection or outbreak. Population genetic dynamics of B. pseudomallei are particularly complicated relative to other bacterial pathogens, but the work here provides the ability for broad scale population assignment. As there is currently no independent empirical measure of successful population assignment, we provide comprehensive analytical details of our comparisons to enable the reader to evaluate the robustness of population designations and assignments as they pertain to individual research questions. Finer scale subdivision and verification of current population compositions will likely be possible with genotyping data that more comprehensively samples the genome. The approach used here may be valuable for other non-clonal pathogens that lack simple group-defining genetic

FORMING SELF-ASSEMBLED CELL ARRAYS AND MEASURING THE OXYGEN CONSUMPTION RATE OF A SINGLE LIVE CELL.

Science.gov (United States)

Etzkorn, James R; McQuaide, Sarah C; Anderson, Judy B; Meldrum, Deirdre R; Parviz, Babak A

2009-06-01

We report a method for forming arrays of live single cells on a chip using polymer micro-traps made of SU8. We have studied the toxicity of the microfabricated structures and the associated environment for two cell lines. We also report a method for measuring the oxygen consumption rate of a single cell using optical interrogation of molecular oxygen sensors placed in micromachined micro-wells by temporarily sealing the cells in the micro-traps. The new techniques presented here add to the collection of tools available for performing "single-cell" biology. A single-cell self-assembly yield of 61% was achieved with oxygen draw down rates of 0.83, 0.82, and 0.71 fmol/minute on three isolated live A549 cells.

Assignment of Streptococcus agalactiae isolates to clonal complexes using a small set of single nucleotide polymorphisms

Directory of Open Access Journals (Sweden)

Gilbert Gwendolyn L

2008-08-01

Full Text Available Abstract Background Streptococcus agalactiae (Group B Streptococcus (GBS is an important human pathogen, particularly of newborns. Emerging evidence for a relationship between genotype and virulence has accentuated the need for efficient and well-defined typing methods. The objective of this study was to develop a single nucleotide polymorphism (SNP based method for assigning GBS isolates to multilocus sequence typing (MLST-defined clonal complexes. Results It was found that a SNP set derived from the MLST database on the basis of maximisation of Simpsons Index of Diversity provided poor resolution and did not define groups concordant with the population structure as defined by eBURST analysis of the MLST database. This was interpreted as being a consequence of low diversity and high frequency horizontal gene transfer. Accordingly, a different approach to SNP identification was developed. This entailed use of the "Not-N" bioinformatic algorithm that identifies SNPs diagnostic for groups of known sequence variants, together with an empirical process of SNP testing. This yielded a four member SNP set that divides GBS into 10 groups that are concordant with the population structure. A fifth SNP was identified that increased the sensitivity for the clinically significant clonal complex 17 to 100%. Kinetic PCR methods for the interrogation of these SNPs were developed, and used to genotype 116 well characterized isolates. Conclusion A five SNP method for dividing GBS into biologically valid groups has been developed. These SNPs are ideal for high throughput surveillance activities, and combining with more rapidly evolving loci when additional resolution is required.

Assignment of Streptococcus agalactiae isolates to clonal complexes using a small set of single nucleotide polymorphisms.

Science.gov (United States)

Honsa, Erin; Fricke, Thomas; Stephens, Alex J; Ko, Danny; Kong, Fanrong; Gilbert, Gwendolyn L; Huygens, Flavia; Giffard, Philip M

2008-08-19

Streptococcus agalactiae (Group B Streptococcus (GBS)) is an important human pathogen, particularly of newborns. Emerging evidence for a relationship between genotype and virulence has accentuated the need for efficient and well-defined typing methods. The objective of this study was to develop a single nucleotide polymorphism (SNP) based method for assigning GBS isolates to multilocus sequence typing (MLST)-defined clonal complexes. It was found that a SNP set derived from the MLST database on the basis of maximization of Simpsons Index of Diversity provided poor resolution and did not define groups concordant with the population structure as defined by eBURST analysis of the MLST database. This was interpreted as being a consequence of low diversity and high frequency horizontal gene transfer. Accordingly, a different approach to SNP identification was developed. This entailed use of the "Not-N" bioinformatic algorithm that identifies SNPs diagnostic for groups of known sequence variants, together with an empirical process of SNP testing. This yielded a four member SNP set that divides GBS into 10 groups that are concordant with the population structure. A fifth SNP was identified that increased the sensitivity for the clinically significant clonal complex 17 to 100%. Kinetic PCR methods for the interrogation of these SNPs were developed, and used to genotype 116 well characterized isolates. A five SNP method for dividing GBS into biologically valid groups has been developed. These SNPs are ideal for high throughput surveillance activities, and combining with more rapidly evolving loci when additional resolution is required.

The shape and dynamics of the generation of the splash forms in single-phase systems after drop hitting

Science.gov (United States)

Sochan, Agata; Beczek, Michał; Mazur, Rafał; RyŻak, Magdalena; Bieganowski, Andrzej

2018-02-01

The splash phenomenon is being increasingly explored with the use of modern measurement tools, including the high-speed cameras. Recording images at a rate of several thousand frames per second facilitates parameterization and description of the dynamics of splash phases. This paper describes the impact of a single drop of a liquid falling on the surface of the same liquid. Three single-phase liquid systems, i.e., water, petrol, and diesel fuel, were examined. The falling drops were characterized by different kinetic energy values depending on the height of the fall, which ranged from 0.1 to 7.0 m. Four forms, i.e., waves, crowns, semi-closed domes, and domes, were distinguished depending on the drop energy. The analysis of the recorded images facilitated determination of the static and dynamic parameters of each form, e.g., the maximum height of each splash form, the width of the splash form at its maximum height, and the rate of growth of the splash form. We, Re, Fr, and K numbers were determined for all analyzed liquid systems. On the basis of the obtained values of dimensionless numbers, the areas of occurrence of characteristic splash forms were separated.

Using HL7 in hospital staff assignments.

Science.gov (United States)

Unluturk, Mehmet S

2014-02-01

Hospital staff assignments are the instructions that allocate the hospital staff members to the hospital beds. Currently, hospital administrators make the assignments without accessing the information regarding the occupancy of the hospital beds and the acuity of the patient. As a result, administrators cannot distinguish between occupied and unoccupied beds, and may therefore assign staff to unoccupied beds. This gives rise to uneven and inefficient staff assignments. In this paper, the hospital admission-discharge-transfer (ADT) system is employed both as a data source and an assignment device to create staff assignments. When the patient data is newly added or modified, the ADT system updates the assignment software client with the relevant data. Based on the relevant data, the assignment software client is able to construct staff assignments in a more efficient way. © 2013 Elsevier Ltd. All rights reserved.

Methods of forming semiconductor devices and devices formed using such methods

Science.gov (United States)

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Evolution of Various Library Instruction Strategies: Using Student Feedback to Create and Enhance Online Active Learning Assignments

Directory of Open Access Journals (Sweden)

Marcie Lynne Jacklin

2013-06-01

Full Text Available This case study traces the evolution of library assignments for biological science students from paper-based workbooks in a blended (hands-on workshop to blended learning workshops using online assignments to online active learning modules which are stand-alone without any face-to-face instruction. As the assignments evolved to adapt to online learning supporting materials in the form of PDFs (portable document format, screen captures and screencasting were embedded into the questions as teaching moments to replace face-to-face instruction. Many aspects of the evolution of the assignment were based on student feedback from evaluations, input from senior lab demonstrators and teaching assistants, and statistical analysis of the students’ performance on the assignment. Advantages and disadvantages of paper-based and online assignments are discussed. An important factor for successful online learning may be the ability to get assistance.

Canonical form of three-fermion pure-states with six single particle states

International Nuclear Information System (INIS)

Chen, Lin; Ž Ðoković, Dragomir; Grassl, Markus; Zeng, Bei

2014-01-01

We construct a canonical form for pure states in ∧ 3 (C 6 ), the three-fermion system with six single particle states, under local unitary (LU) transformations, i.e., the unitary group U(6). We also construct a minimal set of generators of the algebra of polynomial U(6)-invariants on ∧ 3 (C 6 ). It turns out that this algebra is isomorphic to the algebra of polynomial LU-invariants of three-qubits which are additionally invariant under qubit permutations. As a consequence of this surprising fact, we deduce that there is a one-to-one correspondence between the U(6)-orbits of pure three-fermion states in ∧ 3 (C 6 ) and the LU orbits of pure three-qubit states when qubit permutations are allowed. As an important byproduct, we obtain a new canonical form for pure three-qubit states under LU transformations U(2) × U(2) × U(2) (no qubit permutations allowed)

RESCUE: An artificial neural network tool for the NMR spectral assignment of proteins

International Nuclear Information System (INIS)

Pons, J.L.; Delsuc, M.A.

1999-01-01

The assignment of the 1 H spectrum of a protein or a polypeptide is the prerequisite for advanced NMR studies. We present here an assignment tool based on the artificial neural network technology, which determines the type of the amino acid from the chemical shift values observed in the 1 H spectrum. Two artificial neural networks have been trained and extensively tested against a non-redundant subset of the BMRB chemical shift data bank [Seavey, B.R. et al. (1991) J. Biomol. NMR, 1, 217-236]. The most promising of the two accomplishes the analysis in two steps, grouping related amino acids together. It presents a mean rate of success above 80% on the test set. The second network tested separates down to the single amino acid; it presents a mean rate of success of 63%. This tool has been used to assist the manual assignment of peptides and proteins and can also be used as a block in an automated approach to assignment. The program has been called RESCUE and is made publicly available at the following URL: http://www.infobiosud.univ-montp1.fr/rescue

Improvement in Student Data Analysis Skills after Out-of-Class Assignments

Directory of Open Access Journals (Sweden)

Kristen Lee Williams Walton

2016-12-01

Full Text Available The ability to understand and interpret data is a critical aspect of scientific thinking.  However, although data analysis is often a focus in biology majors classes, many textbooks for allied health majors classes are primarily content-driven and do not include substantial amounts of experimental data in the form of graphs and figures.  In a lower-division allied health majors microbiology class, students were exposed to data from primary journal articles as take-home assignments and their data analysis skills were assessed in a pre-/posttest format.  Students were given 3 assignments that included data analysis questions.  Assignments ranged from case studies that included a figure from a journal article to reading a short journal article and answering questions about multiple figures or tables.  Data were represented as line or bar graphs, gel photographs, and flow charts.  The pre- and posttest was designed incorporating the same types of figures to assess whether the assignments resulted in any improvement in data analysis skills.  The mean class score showed a small but significant improvement from the pretest to the posttest across three semesters of testing.  Scores on individual questions testing accurate conclusions and predictions improved the most.  This supports the conclusion that a relatively small number of out-of-class assignments through the semester resulted in a significant improvement in data analysis abilities in this population of students.

A note on ranking assignments using reoptimization

DEFF Research Database (Denmark)

Pedersen, Christian Roed; Nielsen, L.R.; Andersen, K.A.

2005-01-01

We consider the problem of ranking assignments according to cost in the classical linear assignment problem. An algorithm partitioning the set of possible assignments, as suggested by Murty, is presented where, for each partition, the optimal assignment is calculated using a new reoptimization...

Real life working shift assignment problem

Science.gov (United States)

Sze, San-Nah; Kwek, Yeek-Ling; Tiong, Wei-King; Chiew, Kang-Leng

2017-07-01

This study concerns about the working shift assignment in an outlet of Supermarket X in Eastern Mall, Kuching. The working shift assignment needs to be solved at least once in every month. Current approval process of working shifts is too troublesome and time-consuming. Furthermore, the management staff cannot have an overview of manpower and working shift schedule. Thus, the aim of this study is to develop working shift assignment simulation and propose a working shift assignment solution. The main objective for this study is to fulfill manpower demand at minimum operation cost. Besides, the day off and meal break policy should be fulfilled accordingly. Demand based heuristic is proposed to assign working shift and the quality of the solution is evaluated by using the real data.

24 CFR 221.770 - Assignment option.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Assignment option. 221.770 Section... § 221.770 Assignment option. A mortgagee holding a conditional or firm commitment issued on or before... mortgagee's approved underwriter on or before November 30, 1983) has the option to assign, transfer and...

Stress in Context: Morpho-Syntactic Properties Affect Lexical Stress Assignment in Reading Aloud.

Science.gov (United States)

Spinelli, Giacomo; Sulpizio, Simone; Primativo, Silvia; Burani, Cristina

2016-01-01

Recent findings from English and Russian have shown that grammatical category plays a key role in stress assignment. In these languages, some grammatical categories have a typical stress pattern and this information is used by readers. However, whether readers are sensitive to smaller distributional differences and other morpho-syntactic properties (e.g., gender, number, person) remains unclear. We addressed this issue in word and non-word reading in Italian, a language in which: (1) nouns and verbs differ in the proportion of words with a dominant stress pattern; (2) information specified by words sharing morpho-syntactic properties may contrast with other sources of information, such as stress neighborhood. Both aspects were addressed in two experiments in which context words were used to induce the desired morpho-syntactic properties. Experiment 1 showed that the relatively different proportions of stress patterns between grammatical categories do not affect stress processing in word reading. In contrast, Experiment 2 showed that information specified by words sharing morpho-syntactic properties outweighs stress neighborhood in non-word reading. Thus, while general information specified by grammatical categories may not be used by Italian readers, stress neighbors with morpho-syntactic properties congruent with those of the target stimulus have a primary role in stress assignment. These results underscore the importance of expanding investigations of stress assignment beyond single words, as current models of single-word reading seem unable to account for our results.

Effortless assignment with 4D covariance sequential correlation maps.

Science.gov (United States)

Harden, Bradley J; Mishra, Subrata H; Frueh, Dominique P

2015-11-01

Traditional Nuclear Magnetic Resonance (NMR) assignment procedures for proteins rely on preliminary peak-picking to identify and label NMR signals. However, such an approach has severe limitations when signals are erroneously labeled or completely neglected. The consequences are especially grave for proteins with substantial peak overlap, and mistakes can often thwart entire projects. To overcome these limitations, we previously introduced an assignment technique that bypasses traditional pick peaking altogether. Covariance Sequential Correlation Maps (COSCOMs) transform the indirect connectivity information provided by multiple 3D backbone spectra into direct (H, N) to (H, N) correlations. Here, we present an updated method that utilizes a single four-dimensional spectrum rather than a suite of three-dimensional spectra. We demonstrate the advantages of 4D-COSCOMs relative to their 3D counterparts. We introduce improvements accelerating their calculation. We discuss practical considerations affecting their quality. And finally we showcase their utility in the context of a 52 kDa cyclization domain from a non-ribosomal peptide synthetase. Copyright © 2015 Elsevier Inc. All rights reserved.

Job Assignments under Moral Hazard

DEFF Research Database (Denmark)

Koch, Alexander; Nafziger, Julia

Inefficient job assignments are usually explained with incomplete information about employees' abilities or contractual imperfections. We show that inefficient assignments arise even without uncertainty about the employee's ability and with complete contracts. Building on this result we provide...

EZ-ASSIGN, a program for exhaustive NMR chemical shift assignments of large proteins from complete or incomplete triple-resonance data

Energy Technology Data Exchange (ETDEWEB)

Zuiderweg, Erik R. P., E-mail: zuiderwe@umich.edu; Bagai, Ireena [The University of Michigan Medical School, Department of Biological Chemistry (United States); Rossi, Paolo [Rutgers University, Center for Integrative Proteomics Research (United States); Bertelsen, Eric B. [Arbor Communications, Inc. (United States)

2013-10-15

For several of the proteins in the BioMagResBank larger than 200 residues, 60 % or fewer of the backbone resonances were assigned. But how reliable are those assignments? In contrast to complete assignments, where it is possible to check whether every triple-resonance Generalized Spin System (GSS) is assigned once and only once, with incomplete data one should compare all possible assignments and pick the best one. But that is not feasible: For example, for 200 residues and an incomplete set of 100 GSS, there are 1.6 Multiplication-Sign 10{sup 260} possible assignments. In 'EZ-ASSIGN', the protein sequence is divided in smaller unique fragments. Combined with intelligent search approaches, an exhaustive comparison of all possible assignments is now feasible using a laptop computer. The program was tested with experimental data of a 388-residue domain of the Hsp70 chaperone protein DnaK and for a 351-residue domain of a type III secretion ATPase. EZ-ASSIGN reproduced the hand assignments. It did slightly better than the computer program PINE (Bahrami et al. in PLoS Comput Biol 5(3):e1000307, 2009) and significantly outperformed SAGA (Crippen et al. in J Biomol NMR 46:281-298, 2010), AUTOASSIGN (Zimmerman et al. in J Mol Biol 269:592-610, 1997), and IBIS (Hyberts and Wagner in J Biomol NMR 26:335-344, 2003). Next, EZ-ASSIGN was used to investigate how well NMR data of decreasing completeness can be assigned. We found that the program could confidently assign fragments in very incomplete data. Here, EZ-ASSIGN dramatically outperformed all the other assignment programs tested.

24 CFR 221.255 - Assignment option.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Assignment option. 221.255 Section... Assignment option. (a) A mortgagee holding a mortgage insured pursuant to a conditional or firm commitment issued on or before November 30, 1983 has the option to assign, transfer and deliver to the Commissioner...

A general assignment method for oriented sample (OS) solid-state NMR of proteins based on the correlation of resonances through heteronuclear dipolar couplings in samples aligned parallel and perpendicular to the magnetic field.

Science.gov (United States)

Lu, George J; Son, Woo Sung; Opella, Stanley J

2011-04-01

A general method for assigning oriented sample (OS) solid-state NMR spectra of proteins is demonstrated. In principle, this method requires only a single sample of a uniformly ¹⁵N-labeled membrane protein in magnetically aligned bilayers, and a previously assigned isotropic chemical shift spectrum obtained either from solution NMR on micelle or isotropic bicelle samples or from magic angle spinning (MAS) solid-state NMR on unoriented proteoliposomes. The sequential isotropic resonance assignments are transferred to the OS solid-state NMR spectra of aligned samples by correlating signals from the same residue observed in protein-containing bilayers aligned with their normals parallel and perpendicular to the magnetic field. The underlying principle is that the resonances from the same residue have heteronuclear dipolar couplings that differ by exactly a factor of two between parallel and perpendicular alignments. The method is demonstrated on the membrane-bound form of Pf1 coat protein in phospholipid bilayers, whose assignments have been previously made using an earlier generation of methods that relied on the preparation of many selectively labeled (by residue type) samples. The new method provides the correct resonance assignments using only a single uniformly ¹⁵N-labeled sample, two solid-state NMR spectra, and a previously assigned isotropic spectrum. Significantly, this approach is equally applicable to residues in alpha helices, beta sheets, loops, and any other elements of tertiary structure. Moreover, the strategy bridges between OS solid-state NMR of aligned samples and solution NMR or MAS solid-state NMR of unoriented samples. In combination with the development of complementary experimental methods, it provides a step towards unifying these apparently different NMR approaches. Copyright © 2011 Elsevier Inc. All rights reserved.

An algorithm for ranking assignments using reoptimization

DEFF Research Database (Denmark)

Pedersen, Christian Roed; Nielsen, Lars Relund; Andersen, Kim Allan

2008-01-01

We consider the problem of ranking assignments according to cost in the classical linear assignment problem. An algorithm partitioning the set of possible assignments, as suggested by Murty, is presented where, for each partition, the optimal assignment is calculated using a new reoptimization...... technique. Computational results for the new algorithm are presented...

48 CFR 42.602 - Assignment and location.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Assignment and location... Assignment and location. (a) A CACO may be assigned only when (1) the contractor has at least two locations..., or a full-time CACO may be assigned. In determining the location of the CACO, the responsible agency...

Optimization of the single point incremental forming process for titanium sheets by using response surface

Directory of Open Access Journals (Sweden)

Saidi Badreddine

2016-01-01

Full Text Available The single point incremental forming process is well-known to be perfectly suited for prototyping and small series. One of its fields of applicability is the medicine area for the forming of titanium prostheses or titanium medical implants. However this process is not yet very industrialized, mainly due its geometrical inaccuracy, its not homogeneous thickness distribution& Moreover considerable forces can occur. They must be controlled in order to preserve the tooling. In this paper, a numerical approach is proposed in order to minimize the maximum force achieved during the incremental forming of titanium sheets and to maximize the minimal thickness. A surface response methodology is used to find the optimal values of two input parameters of the process, the punch diameter and the vertical step size of the tool path.

EZ-ASSIGN, a program for exhaustive NMR chemical shift assignments of large proteins from complete or incomplete triple-resonance data

International Nuclear Information System (INIS)

Zuiderweg, Erik R. P.; Bagai, Ireena; Rossi, Paolo; Bertelsen, Eric B.

2013-01-01

For several of the proteins in the BioMagResBank larger than 200 residues, 60 % or fewer of the backbone resonances were assigned. But how reliable are those assignments? In contrast to complete assignments, where it is possible to check whether every triple-resonance Generalized Spin System (GSS) is assigned once and only once, with incomplete data one should compare all possible assignments and pick the best one. But that is not feasible: For example, for 200 residues and an incomplete set of 100 GSS, there are 1.6 × 10 260 possible assignments. In “EZ-ASSIGN”, the protein sequence is divided in smaller unique fragments. Combined with intelligent search approaches, an exhaustive comparison of all possible assignments is now feasible using a laptop computer. The program was tested with experimental data of a 388-residue domain of the Hsp70 chaperone protein DnaK and for a 351-residue domain of a type III secretion ATPase. EZ-ASSIGN reproduced the hand assignments. It did slightly better than the computer program PINE (Bahrami et al. in PLoS Comput Biol 5(3):e1000307, 2009) and significantly outperformed SAGA (Crippen et al. in J Biomol NMR 46:281–298, 2010), AUTOASSIGN (Zimmerman et al. in J Mol Biol 269:592–610, 1997), and IBIS (Hyberts and Wagner in J Biomol NMR 26:335–344, 2003). Next, EZ-ASSIGN was used to investigate how well NMR data of decreasing completeness can be assigned. We found that the program could confidently assign fragments in very incomplete data. Here, EZ-ASSIGN dramatically outperformed all the other assignment programs tested

Lepton mixing matrix element U13 and new assignments of universal texture for quark and lepton mass matrices

International Nuclear Information System (INIS)

Matsuda, Koichi; Nishiura, Hiroyuki

2004-01-01

We reanalyze the mass matrix model of quarks and leptons that gives a unified description of quark and lepton mass matrices with the same texture form. By investigating possible types of assignment for the texture components of the lepton mass matrix, we find that a different assignment for neutrinos than for charged leptons can also lead to consistent values of the Maki-Nakagawa-Sakata-Pontecorv (MNSP) lepton mixing matrix. We also find that the predicted value for the lepton mixing matrix element U 13 of the model depends on the assignment. A proper assignment will be discriminated by future experimental data for U 13

Single camera analyses in studying pattern forming dynamics of player interactions in team sports.

OpenAIRE

Duarte, Ricardo; Fernandes, Orlando; Folgado, Hugo; Araújo, Duarte

2013-01-01

A network of patterned interactions between players characterises team ball sports. Thus, interpersonal coordination patterns are an important topic in the study of performance in such sports. A very useful method has been the study of inter-individual interactions captured by a single camera filming an extended performance area. The appropriate collection of positional data allows investigating the pattern forming dynamics emerging in different performance sub-phases of team ball sports. Thi...

STM studies of an atomic-scale gate electrode formed by a single charged vacancy in GaAs

Science.gov (United States)

Lee, Donghun; Daughton, David; Gupta, Jay

2009-03-01

Electric-field control of spin-spin interactions at the atomic level is desirable for the realization of spintronics and spin-based quantum computation. Here we demonstrate the realization of an atomic-scale gate electrode formed by a single charged vacancy on the GaAs(110) surface[1]. We can position these vacancies with atomic precision using the tip of a home-built, low temperature STM. Tunneling spectroscopy of single Mn acceptors is used to quantify the electrostatic field as a function of distance from the vacancy. Single Mn acceptors are formed by substituting Mn adatoms for Ga atoms in the first layer of the p-GaAs(110) surface[2]. Depending on the distance, the in-gap resonance of single Mn acceptors can shift as much as 200meV. Our data indicate that the electrostatic field decays according to a screened Coulomb potential. The charge state of the vacancy can be switched to neutral, as evidenced by the Mn resonance returning to its unperturbed position. Reversible control of the local electric field as well as charged states of defects in semiconductors can open new insights such as realizing an atomic-scale gate control and studying spin-spin interactions in semiconductors. http://www.physics.ohio-state.edu/sim jgupta [1] D. Lee and J.A. Gupta (in preparation) [2] D. Kitchen et al., Nature 442, 436-439 (2006)

Single-tier city logistics model for single product

Science.gov (United States)

Saragih, N. I.; Nur Bahagia, S.; Suprayogi; Syabri, I.

2017-11-01

This research develops single-tier city logistics model which consists of suppliers, UCCs, and retailers. The problem that will be answered in this research is how to determine the location of UCCs, to allocate retailers to opened UCCs, to assign suppliers to opened UCCs, to control inventory in the three entities involved, and to determine the route of the vehicles from opened UCCs to retailers. This model has never been developed before. All the decisions will be simultaneously optimized. Characteristic of the demand is probabilistic following a normal distribution, and the number of product is single.

Exogenous spatial attention influences figure-ground assignment.

Science.gov (United States)

Vecera, Shaun P; Flevaris, Anastasia V; Filapek, Joseph C

2004-01-01

In a hierarchical stage account of vision, figure-ground assignment is thought to be completed before the operation of focal spatial attention. Results of previous studies have supported this account by showing that unpredictive, exogenous spatial precues do not influence figure-ground assignment, although voluntary attention can influence figure-ground assignment. However, in these studies, attention was not summoned directly to a region in a figure-ground display. In three experiments, we addressed the relationship between figure-ground assignment and visuospatial attention. In Experiment 1, we replicated the finding that exogenous precues do not influence figure-ground assignment when they direct attention outside of a figure-ground stimulus. In Experiment 2, we demonstrated that exogenous attention can influence figure-ground assignment if it is directed to one of the regions in a figure-ground stimulus. In Experiment 3, we demonstrated that exogenous attention can influence figure-ground assignment in displays that contain a Gestalt figure-ground cue; this result suggests that figure-ground processes are not entirely completed prior to the operation of focal spatial attention. Exogenous spatial attention acts as a cue for figure-ground assignment and can affect the outcome of figure-ground processes.

The Monte Carlo Quiz: Encouraging Punctual Completion and Deep Processing of Assigned Readings

Science.gov (United States)

Fernald, Peter S.

2004-01-01

The Monte Carlo Quiz (MCQ), a single-item quiz, is so named because chance, with the roll of a die, determines (a) whether the quiz is administered; (b) the specific article, chapter, or section of the assigned reading that the quiz covers; and (c) the particular question that makes up the quiz. The MCQ encourages both punctual completion and deep…

Minimum Interference Channel Assignment Algorithm for Multicast in a Wireless Mesh Network

Directory of Open Access Journals (Sweden)

Sangil Choi

2016-12-01

Full Text Available Wireless mesh networks (WMNs have been considered as one of the key technologies for the configuration of wireless machines since they emerged. In a WMN, wireless routers provide multi-hop wireless connectivity between hosts in the network and also allow them to access the Internet via gateway devices. Wireless routers are typically equipped with multiple radios operating on different channels to increase network throughput. Multicast is a form of communication that delivers data from a source to a set of destinations simultaneously. It is used in a number of applications, such as distributed games, distance education, and video conferencing. In this study, we address a channel assignment problem for multicast in multi-radio multi-channel WMNs. In a multi-radio multi-channel WMN, two nearby nodes will interfere with each other and cause a throughput decrease when they transmit on the same channel. Thus, an important goal for multicast channel assignment is to reduce the interference among networked devices. We have developed a minimum interference channel assignment (MICA algorithm for multicast that accurately models the interference relationship between pairs of multicast tree nodes using the concept of the interference factor and assigns channels to tree nodes to minimize interference within the multicast tree. Simulation results show that MICA achieves higher throughput and lower end-to-end packet delay compared with an existing channel assignment algorithm named multi-channel multicast (MCM. In addition, MICA achieves much lower throughput variation among the destination nodes than MCM.

WebAssign: Assessing Your Students' Understanding Continuously

Science.gov (United States)

Risley, John S.

1999-11-01

Motivating students to learn is a constant challenge for faculty. Technology can play a significant role. One such solution is WebAssign — a web-based homework system that offers new teaching and learning opportunities for educators and their students. WebAssign delivers, collects, grades, and records customized homework assignments over the Internet. Students get immediate feedback with credit and instructors can implement "Just-in-Time" teaching. In this talk, I will describe how assignments can be generated with different numerical values for each question, giving each student a unique problem to solve. This feature encourages independent thinking with the benefit of collaborative learning. Example assignments taken from textbook questions and intellectually engaging Java applet simulations will be shown. Studies and first-hand experience on the educational impact of using WebAssign will also be discussed.

Solving the rectangular assignment problem and applications

NARCIS (Netherlands)

Bijsterbosch, J.; Volgenant, A.

2010-01-01

The rectangular assignment problem is a generalization of the linear assignment problem (LAP): one wants to assign a number of persons to a smaller number of jobs, minimizing the total corresponding costs. Applications are, e.g., in the fields of object recognition and scheduling. Further, we show

7 CFR 900.106 - Assignment of mediator.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Assignment of mediator. 900.106 Section 900.106 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Assignment of mediator. The Director of the Division shall assign a mediator, from the group designated by...

DNA barcode data accurately assign higher spider taxa

Directory of Open Access Journals (Sweden)

Jonathan A. Coddington

2016-07-01

Full Text Available The use of unique DNA sequences as a method for taxonomic identification is no longer fundamentally controversial, even though debate continues on the best markers, methods, and technology to use. Although both existing databanks such as GenBank and BOLD, as well as reference taxonomies, are imperfect, in best case scenarios “barcodes” (whether single or multiple, organelle or nuclear, loci clearly are an increasingly fast and inexpensive method of identification, especially as compared to manual identification of unknowns by increasingly rare expert taxonomists. Because most species on Earth are undescribed, a complete reference database at the species level is impractical in the near term. The question therefore arises whether unidentified species can, using DNA barcodes, be accurately assigned to more inclusive groups such as genera and families—taxonomic ranks of putatively monophyletic groups for which the global inventory is more complete and stable. We used a carefully chosen test library of CO1 sequences from 49 families, 313 genera, and 816 species of spiders to assess the accuracy of genus and family-level assignment. We used BLAST queries of each sequence against the entire library and got the top ten hits. The percent sequence identity was reported from these hits (PIdent, range 75–100%. Accurate assignment of higher taxa (PIdent above which errors totaled less than 5% occurred for genera at PIdent values >95 and families at PIdent values ≥ 91, suggesting these as heuristic thresholds for accurate generic and familial identifications in spiders. Accuracy of identification increases with numbers of species/genus and genera/family in the library; above five genera per family and fifteen species per genus all higher taxon assignments were correct. We propose that using percent sequence identity between conventional barcode sequences may be a feasible and reasonably accurate method to identify animals to family/genus. However

My Favorite Assignment.

Science.gov (United States)

ABCA Bulletin, 1983

1983-01-01

Describes three assignments for enticing business communication students to undertake library research: an analysis of a Fortune 500 company, a career choice report, and a report on an organization that offers potential employment. (AEA)

Gene-associated markers can assign origin in a weakly structured fish, Atlantic herring

DEFF Research Database (Denmark)

Bekkevold, Dorte; Helyar, Sarah J.; Limborg, Morten T.

2015-01-01

, there are relatively few examples in marine fish displaying accurate origin assignment. We synthesize data for 156 single-nucleotide polymorphisms typed in 1039 herring, Clupea harengus L., spanning the Northeast Atlantic to develop a tool that allows assignment of individual herring to their regional origin. We show......Regulations on the exploitation of populations of commercially important fish species and the ensuing consumer interest in sustainable products have increased the need to accurately identify the population of origin of fish and fish products. Although genomics-based tools have proven highly useful...... the method's suitability to address specific biological questions, as well as management applications. We analyse temporally replicated collections from two areas, the Skagerrak (n = 81, 84, 66) and the western Baltic (n = 52, 52). Both areas harbour heavily fished mixed-origin stocks, complicating...

The use of single point incremental forming for customized implants of unicondylar knee arthroplasty: a review

Directory of Open Access Journals (Sweden)

Pankaj Kailasrao Bhoyar

Full Text Available Abstract Introduction The implantable devices are having enormous market. These products are basically made by traditional manufacturing process, but for the custom-made implants Incremental Sheet Forming is a paramount alternative. Single Point Incremental Forming (SPIF is a manufacturing process to form intricate, asymmetrical components. It forms the component using stretching and bending by maintaining materials crystal structure. SPIF process can be performed using conventional Computer Numerical Control (CNC milling machine. Review This review paper elaborates the various manufacturing processes carried on various biocompatible metallic and nonmetallic customised implantable devices. Conclusion Ti-6Al-4V alloy is broadly used for biomedical implants, but in this alloy, Vanadium is toxic so this alloy is not compatible for implants. The attention of researchers is towards the non toxic and suitable biocompatible materials. For this reason, a novel approach was developed in order to enhance the mechanical properties of this material. . The development of incremental forming technique can improve the formability of existing alloys and may meet the current strict requirements for performance of dies and punches.

Waste Form Features, Events, and Processes

International Nuclear Information System (INIS)

R. Schreiner

2004-01-01

The purpose of this report is to evaluate and document the inclusion or exclusion of the waste form features, events and processes (FEPs) with respect to modeling used to support the Total System Performance Assessment for License Application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical bases for screening decisions. This information is required by the Nuclear Regulatory Commission (NRC) in 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report deal with the issues related to the degradation and potential failure of the waste form and the migration of the waste form colloids. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA, (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical bases for exclusion from TSPA-LA (i.e., why the FEP is excluded). This revision addresses the TSPA-LA FEP list (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The primary purpose of this report is to identify and document the analyses and resolution of the features, events, and processes (FEPs) associated with the waste form performance in the repository. Forty FEPs were identified that are associated with the waste form performance. This report has been prepared to document the screening methodology used in the process of FEP inclusion and exclusion. The analyses documented in this report are for the license application (LA) base case design (BSC 2004 [DIRS 168489]). In this design, a drip shield is placed over the waste package and no backfill is placed over the drip shield (BSC 2004 [DIRS 168489]). Each FEP may include one or more specific issues that are collectively described by a FEP name and a FEP description. The FEP description may encompass a single feature, process or event, or a few closely related or coupled processes if the entire FEP can be addressed by a single specific screening argument or TSPA-LA disposition. The FEPs are

Waste Form Features, Events, and Processes

Energy Technology Data Exchange (ETDEWEB)

R. Schreiner

2004-10-27

The purpose of this report is to evaluate and document the inclusion or exclusion of the waste form features, events and processes (FEPs) with respect to modeling used to support the Total System Performance Assessment for License Application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical bases for screening decisions. This information is required by the Nuclear Regulatory Commission (NRC) in 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report deal with the issues related to the degradation and potential failure of the waste form and the migration of the waste form colloids. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA, (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical bases for exclusion from TSPA-LA (i.e., why the FEP is excluded). This revision addresses the TSPA-LA FEP list (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The primary purpose of this report is to identify and document the analyses and resolution of the features, events, and processes (FEPs) associated with the waste form performance in the repository. Forty FEPs were identified that are associated with the waste form performance. This report has been prepared to document the screening methodology used in the process of FEP inclusion and exclusion. The analyses documented in this report are for the license application (LA) base case design (BSC 2004 [DIRS 168489]). In this design, a drip shield is placed over the waste package and no backfill is placed over the drip shield (BSC 2004 [DIRS 168489]). Each FEP may include one or more specific issues that are collectively described by a FEP name and a FEP description. The FEP description may encompass a single feature, process or event, or a few closely related or coupled processes if the entire FEP can be addressed by a single specific screening argument or TSPA-LA disposition. The FEPs are

Structure of a second crystal form of Bence-Jones protein Loc: Strikingly different domain associations in two crystal forms of a single protein

International Nuclear Information System (INIS)

Schiffer, M.; Ainsworth, C.; Xu, Z.B.; Carperos, W.; Olsen, K.; Solomon, A.; Stevens, F.J.; Chang, C.H.

1989-01-01

The authors have determined the structure of the immunoglobulin light-chain dimer Loc in a second crystal form that was grown from distilled water. The crystal structure was determined to 2.8-angstrom resolution; the R factor is 0.22. The two variable domains are related by local 2-fold axes and form an antigen binding pocket. The variable domain-variable domain interaction observed in this crystal form differs from the one exhibited by the protein when crystallized from ammonium sulfate in which the two variable domains formed a protrusion. The structure attained in the distilled water crystals is similar to, but not identical with, the one observed for the Mcg light-chain dimer in crystals grown from ammonium sulfate. Thus, two strikingly different structures were attained by this multisubunit protein in crystals grown under two different, commonly used, crystallization techniques. The quaternary interactions exhibited by the protein in the two crystal forms are sufficiently different to suggest fundamentally different interpretations of the structural basis for the function of this protein. This observation may have general implications regarding the use of single crystallographic determinations for detailed identification of structural and functional relationships. On the other hand, proteins whose structures can be altered by manipulation of crystallization conditions may provide useful systems for study of fundamental structural chemistry

Managing voluntary turnover through challenging assignments

NARCIS (Netherlands)

Preenen, P.T.Y.; de Pater, I.E.; van Vianen, A.E.M.; Keijzer, L.

2011-01-01

This study examines employees’ challenging assignments as manageable means to reduce turnover intentions, job search behaviors, and voluntary turnover. Results indicate that challenging assignments are negatively related to turnover intentions and job search behaviors and that these relationships

Managing voluntary turnover through challenging assignments

NARCIS (Netherlands)

Preenen, P.T.Y.; Pater, I.E. de; Vianen, A.E.M. van; Keijzer, L.

2011-01-01

This study examines employees' challenging assignments as manageable means to reduce turnover intentions, job search behaviors, and voluntary turnover. Results indicate that challenging assignments are negatively related to turnover intentions and job search behaviors and that these relationships

Together or Separate: Disentangling the Effects of Single-Sex Schooling from the Effects of Single-Sex Schools

OpenAIRE

Do Won Kwak; Hyejin Ku

2013-01-01

To separately identify the effects of single-sex “schooling†versus single- sex “schools†, we exploit two unusual experiments in South Korea: students are randomly assigned to academic high schools within districts regardless of school types, and some schools changed their types from single-sex to coeducational over time. While the overall effects of attending a single-sex school are positive for both boys and girls, these are driven by the differences in resources between school types...

Scaffolding students’ assignments

DEFF Research Database (Denmark)

Slot, Marie Falkesgaard

2013-01-01

This article discusses scaffolding in typical student assignments in mother tongue learning materials in upper secondary education in Denmark and the United Kingdom. It has been determined that assignments do not have sufficient scaffolding end features to help pupils understand concepts and build...... objects. The article presents the results of empirical research on tasks given in Danish and British learning materials. This work is based on a further development of my PhD thesis: “Learning materials in the subject of Danish” (Slot 2010). The main focus is how cognitive models (and subsidiary explicit...... learning goals) can help students structure their argumentative and communica-tive learning processes, and how various multimodal representations can give more open-ended learning possibilities for collaboration. The article presents a short introduction of the skills for 21st century learning and defines...

Mars - robust automatic backbone assignment of proteins

International Nuclear Information System (INIS)

Jung, Young-Sang; Zweckstetter, Markus

2004-01-01

MARS a program for robust automatic backbone assignment of 13 C/ 15 N labeled proteins is presented. MARS does not require tight thresholds for establishing sequential connectivity or detailed adjustment of these thresholds and it can work with a wide variety of NMR experiments. Using only 13 C α / 13 C β connectivity information, MARS allows automatic, error-free assignment of 96% of the 370-residue maltose-binding protein. MARS can successfully be used when data are missing for a substantial portion of residues or for proteins with very high chemical shift degeneracy such as partially or fully unfolded proteins. Other sources of information, such as residue specific information or known assignments from a homologues protein, can be included into the assignment process. MARS exports its result in SPARKY format. This allows visual validation and integration of automated and manual assignment

Combining M-FISH and Quantum Dot technology for fast chromosomal assignment of transgenic insertions

Directory of Open Access Journals (Sweden)

Yusuf Mohammed

2011-12-01

Full Text Available Abstract Background Physical mapping of transgenic insertions by Fluorescence in situ Hybridization (FISH is a reliable and cost-effective technique. Chromosomal assignment is commonly achieved either by concurrent G-banding or by a multi-color FISH approach consisting of iteratively co-hybridizing the transgenic sequence of interest with one or more chromosome-specific probes at a time, until the location of the transgenic insertion is identified. Results Here we report a technical development for fast chromosomal assignment of transgenic insertions at the single cell level in mouse and rat models. This comprises a simplified 'single denaturation mixed hybridization' procedure that combines multi-color karyotyping by Multiplex FISH (M-FISH, for simultaneous and unambiguous identification of all chromosomes at once, and the use of a Quantum Dot (QD conjugate for the transgene detection. Conclusions Although the exploitation of the unique optical properties of QD nanocrystals, such as photo-stability and brightness, to improve FISH performance generally has been previously investigated, to our knowledge this is the first report of a purpose-designed molecular cytogenetic protocol in which the combined use of QDs and standard organic fluorophores is specifically tailored to assist gene transfer technology.

Assignment of element and isotope factors

International Nuclear Information System (INIS)

Schneider, R.A.

1984-01-01

Element and isotope factors are assigned in the NICS internal accounting system at the Exxon Fuel Fabrication Facility on the basis of coded information included on the material transfer documents. This paper explains more fully the manner in which NICS assigns these factors

Comparison of participatively set and assigned goals in the reduction of alcohol use.

Science.gov (United States)

Lozano, Brian E; Stephens, Robert S

2010-12-01

The effects of setting goals on goal commitment, self-efficacy for goal achievement, and goal achievement in the context of an alcohol use intervention were examined using an experimental design in which participants were randomized to participatively set goals, assigned goals, and no goal conditions. One hundred and twenty-six heavy-drinking college students received a single cognitive-behavioral assessment/intervention session and completed measures of goal commitment, self-efficacy for goal achievement, and alcohol use. Results were consistent with, and expanded upon, previous research by demonstrating that having a goal for limiting alcohol consumption was predictive of lower quantity and frequency of alcohol use relative to not having a goal. Participation in goal setting yielded greater goal commitment and self-efficacy for goal achievement than assigned goals, but did not result in significantly greater reductions in alcohol use relative to assigned goals. Goal commitment and self-efficacy explained unique variance in the prediction of alcohol use at follow-up. Findings support the importance of goal setting in alcohol interventions and suggest areas for further research. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

77 FR 69897 - Comment Request for Information Collection for Occupational Code Assignment, Extension Without...

Science.gov (United States)

2012-11-21

.... Background The Occupational Code Assignment form (ETA 741) was developed as a public service to the users of... all jobs in the United States economy. However, new specialties are constantly evolving and emerging... associated data on the importance and level of a range of occupational characteristics and requirements...

Inferential backbone assignment for sparse data

International Nuclear Information System (INIS)

Vitek, Olga; Bailey-Kellogg, Chris; Craig, Bruce; Vitek, Jan

2006-01-01

This paper develops an approach to protein backbone NMR assignment that effectively assigns large proteins while using limited sets of triple-resonance experiments. Our approach handles proteins with large fractions of missing data and many ambiguous pairs of pseudoresidues, and provides a statistical assessment of confidence in global and position-specific assignments. The approach is tested on an extensive set of experimental and synthetic data of up to 723 residues, with match tolerances of up to 0.5 ppm for C α and C β resonance types. The tests show that the approach is particularly helpful when data contain experimental noise and require large match tolerances. The keys to the approach are an empirical Bayesian probability model that rigorously accounts for uncertainty in the data at all stages in the analysis, and a hybrid stochastic tree-based search algorithm that effectively explores the large space of possible assignments

Manual of functions, assignments, and responsibilities for nuclear safety: Revision 2

Energy Technology Data Exchange (ETDEWEB)

1994-10-15

The FAR Manual is a convenient easy-to-use collection of the functions, assignments, and responsibilities (FARs) of DOE nuclear safety personnel. Current DOE directives, including Orders, Secretary of Energy Notices, and other assorted policy memoranda, are the source of this information and form the basis of the FAR Manual. Today, the majority of FARs for DOE personnel are contained in DOE`s nuclear safety Orders. As these Orders are converted to rules in the Code of Federal Regulations, the FAR Manual will become the sole source for information relating to the functions, assignments, responsibilities of DOE nuclear safety personnel. The FAR Manual identifies DOE directives that relate to nuclear safety and the specific DOE personnel who are responsible for implementing them. The manual includes only FARs that have been extracted from active directives that have been approved in accordance with the procedures contained in DOE Order 1321.1B.

Superconducting properties of single-crystal Nb sphere formed by large-undercooling solidification process

Energy Technology Data Exchange (ETDEWEB)

Takeya, H.; Sung, Y.S.; Hirata, K.; Togano, K

2003-10-15

An electrostatic levitation (ESL) system has been used for investigating undercooling effects on superconducting materials. In this report, preliminary experiments on Nb (melting temperature: T{sub m}=2477 deg. C) have been performed by melting Nb in levitation using 150 and 250 W Nd-YAG lasers. Since molten Nb is solidified without any contact in a high vacuum condition, a significantly undercooled state up to 400 deg. C is maintained before recalescence followed by solidification. Spherical single crystals of Nb are formed by the ESL process due to the suppression of heterogeneous nucleation. The field dependence of magnetization of Nb shows a reversible behavior as an ideal type II superconductor, implying that it contains almost no flux-pinning centers.

32 CFR 884.2 - Assigned responsibilities.

Science.gov (United States)

2010-07-01

... OF PERSONNEL TO UNITED STATES CIVILIAN AUTHORITIES FOR TRIAL § 884.2 Assigned responsibilities. (a... 32 National Defense 6 2010-07-01 2010-07-01 false Assigned responsibilities. 884.2 Section 884.2... requests for return of members to the United States for delivery to civilian authorities when the request...

Personnel dose assignment practices

International Nuclear Information System (INIS)

Fix, J.J.

1993-04-01

Implementation of DOE N 5480.6 Radiological Control Manual Article 511(3) requirements, to minimize the assignment of personnel dosimeters, should be done only under a broader context ensuring that capabilities are in place to monitor and record personnel exposure both for compliance and for potential litigation. As noted in NCRP Report No. 114, personnel dosimetry programs are conducted to meet four major objectives: radiation safety program control and evaluation; regulatory compliance; epidemiological research; and litigation. A change to Article 511(3) is proposed that would require that minimizing the assignment of personnel dosimeters take place only following full evaluation of overall capabilities (e.g., access control, area dosimetry, etc.) to meet the NCRP objectives

Computational Aspects of Assigning Agents to a Line

DEFF Research Database (Denmark)

Aziz, Haris; Hougaard, Jens Leth; Moreno-Ternero, Juan D.

2017-01-01

-egalitarian assignments. The approach relies on an algorithm which is shown to be faster than general purpose algorithms for the assignment problem. We also extend the approach to probabilistic assignments and explore the computational features of existing, as well as new, methods for this setting....

Computational aspects of assigning agents to a line

DEFF Research Database (Denmark)

Aziz, Haris; Hougaard, Jens Leth; Moreno-Ternero, Juan D.

2017-01-01

-egalitarian assignments. The approach relies on an algorithm which is shown to be faster than general purpose algorithms for the assignment problem. We also extend the approach to probabilistic assignments and explore the computational features of existing, as well as new, methods for this setting....

Prediction and control of pillow defect in single point incremental forming using numerical simulations

International Nuclear Information System (INIS)

Isidore, B. B. Lemopi; Hussain, G.; Khan, Wasim A.; Shamachi, S. Pourhassan

2016-01-01

Pillows formed at the center of sheets in Single point incremental forming (SPIF) are fabrication defects which adversely affect the geometrical accuracy and formability of manufactured parts. This study is focused on using FEA as a tool to predict and control pillowing in SPIF by varying tool size and shape. 3D Finite element analysis (FEA) and experiments are carried out using annealed Aluminum 1050. From FEA, it is found out that the stress/strain state in the immediate vicinity of the forming tool in the transverse direction plays a determinant role on sheet pillowing. Furthermore, pillow height increases as compression in the sheet-plane increases. The nature of in-plane stresses in the transverse direction varies from compressive to tensile as the tool-end geometry is changed from spherical to flat. Additionally, the magnitude of corresponding in-plane stresses decreases as the tool radius increases. According to measurements from the FEA model, flat end tools and large radii both retard pillow formation. However, the influence of changing tool end shape from hemispherical to flat is observed to be more important than the effect of varying tool radius, because the deformation zone remains in tension in the transverse direction while forming with flat end tools. These findings are verified by conducting a set of experiments. A fair agreement between the FEM and empirical results show that FEM can be employed as a tool to predict and control the pillow defect in SPIF.

Prediction and control of pillow defect in single point incremental forming using numerical simulations

Energy Technology Data Exchange (ETDEWEB)

Isidore, B. B. Lemopi [Eastern Mediterranean University, Gazimagusa (Turkmenistan); Hussain, G.; Khan, Wasim A. [GIK Institute of Engineering, Swabi (Pakistan); Shamachi, S. Pourhassan [University of Minho, Guimaraes (Portugal)

2016-05-15

Pillows formed at the center of sheets in Single point incremental forming (SPIF) are fabrication defects which adversely affect the geometrical accuracy and formability of manufactured parts. This study is focused on using FEA as a tool to predict and control pillowing in SPIF by varying tool size and shape. 3D Finite element analysis (FEA) and experiments are carried out using annealed Aluminum 1050. From FEA, it is found out that the stress/strain state in the immediate vicinity of the forming tool in the transverse direction plays a determinant role on sheet pillowing. Furthermore, pillow height increases as compression in the sheet-plane increases. The nature of in-plane stresses in the transverse direction varies from compressive to tensile as the tool-end geometry is changed from spherical to flat. Additionally, the magnitude of corresponding in-plane stresses decreases as the tool radius increases. According to measurements from the FEA model, flat end tools and large radii both retard pillow formation. However, the influence of changing tool end shape from hemispherical to flat is observed to be more important than the effect of varying tool radius, because the deformation zone remains in tension in the transverse direction while forming with flat end tools. These findings are verified by conducting a set of experiments. A fair agreement between the FEM and empirical results show that FEM can be employed as a tool to predict and control the pillow defect in SPIF.

A Computerized Approach to Trickle-Process, Random Assignment.

Science.gov (United States)

Braucht, G. Nicholas; Reichardt, Charles S.

1993-01-01

Procedures for implementing random assignment with trickle processing and ways they can be corrupted are described. A computerized method for implementing random assignment with trickle processing is presented as a desirable alternative in many situations and a way of protecting against threats to assignment validity. (SLD)

Writing Assignments that Promote Active Learning

Science.gov (United States)

Narayanan, M.

2014-12-01

Encourage students to write a detailed, analytical report correlating classroom discussions to an important historical event or a current event. Motivate students interview an expert from industry on a topic that was discussed in class. Ask the students to submit a report with supporting sketches, drawings, circuit diagrams and graphs. Propose that the students generate a complete a set of reading responses pertaining to an assigned topic. Require each student to bring in one comment or one question about an assigned reading. The assignment should be a recent publication in an appropriate journal. Have the students conduct a web search on an assigned topic. Ask them to generate a set of ideas that can relate to classroom discussions. Provide the students with a study guide. The study guide should provide about 10 or 15 short topics. Quiz the students on one or two of the topics. Encourage the students to design or develop some creative real-world examples based on a chapter discussed or a topic of interest. Require that students originate, develop, support and defend a viewpoint using a specifically assigned material. Make the students practice using or utilizing a set of new technical terms they have encountered in an assigned chapter. Have students develop original examples explaining the different terms. Ask the students to select one important terminology from the previous classroom discussions. Encourage the students to explain why they selected that particular word. Ask them to talk about the importance of the terminology from the point of view of their educational objectives and future career. Angelo, T. A. (1991). Ten easy pieces: Assessing higher learning in four dimensions. In T. A. Angelo (Ed.), Classroom research: Early lessons from success (pp. 17-31). New Directions for Teaching and Learning, No. 46. San Francisco: Jossey-Bass.

Tensors, differential forms, and variational principles

CERN Document Server

Lovelock, David

1989-01-01

Incisive, self-contained account of tensor analysis and the calculus of exterior differential forms, interaction between the concept of invariance and the calculus of variations. Emphasis is on analytical techniques, with large number of problems, from routine manipulative exercises to technically difficult assignments.

Reporting the national antimicrobial consumption in Danish pigs: influence of assigned daily dosage values and population measurement

DEFF Research Database (Denmark)

Dupont, Nana Hee; Fertner, Mette Ely; Kristensen, Charlotte Sonne

2016-01-01

Transparent calculation methods are crucial when investigating trends in antimicrobial consumption over time and between populations. Until 2011, one single standardized method was applied when quantifying the Danish pig antimicrobial consumption with the unit "Animal Daily Dose" (ADD). However...... assignment methods, Denmark has also experienced a shift in the production pattern, towards a larger export of live pigs. The aims of this paper were to (1) describe previous and current ADD assignment methods used by the major Danish institutions and (2) to illustrate how ADD assignment method and choice...... DANMAP and DVFA were only identical for 48 % of antimicrobial products approved for use in pigs. From 2007 to 2013, the total number of ADDs per year increased by 9 % when using the new DVFA ADD-values, but decreased by 2 and 7 % when using the new DANMAP ADD-values or the old VetStat ADD...

Detecting Plagiarism in MS Access Assignments

Science.gov (United States)

Singh, Anil

2013-01-01

Assurance of individual effort from students in computer-based assignments is a challenge. Due to digitization, students can easily use a copy of their friend's work and submit it as their own. Plagiarism in assignments puts students who cheat at par with those who work honestly and this compromises the learning evaluation process. Using a…

MASH test 3-11 of the TxDOT single slope bridge rail (type SSTR) on pan-formed bridge deck

Science.gov (United States)

2011-03-01

The objective of this crash test was to determine whether the TxDOT Single Slope Traffic Rail (Type : SSTR) would perform acceptably on a pan-formed deck when tested according to the guidelines set forth in : Manual for Assessing Safety Hardware (MAS...

A branch-and-price algorithm to solve the integrated berth allocation and yard assignment problem in bulk ports

DEFF Research Database (Denmark)

Robenek, Tomáš; Umang, Nitish; Bierlaire, Michel

2014-01-01

In this research, two crucial optimization problems of berth allocation and yard assignment in the context of bulk ports are studied. We discuss how these problems are interrelated and can be combined and solved as a single large scale optimization problem. More importantly we highlight the diffe...

Contaminant Release from Residual Waste in Closed Single-Shell Tanks and Other Waste Forms Associated with the Tanks

International Nuclear Information System (INIS)

Deutsch, William J.

2008-01-01

This chapter describes the release of contaminants from the various waste forms that are anticipated to be associated with closure of the single-shell tanks. These waste forms include residual sludge or saltcake that will remain in the tanks after waste retrieval. Other waste forms include engineered glass and cementitious materials as well as contaminated soil impacted by previous tank leaks. This chapter also describes laboratory testing to quantify contaminant release and how the release data are used in performance/risk assessments for the tank waste management units and the onsite waste disposal facilities. The chapter ends with a discussion of the surprises and lessons learned to date from the testing of waste materials and the development of contaminant release models

Assignment of the Raman lines in single crystal barium metaborate (beta-BaB sub 2 O sub 4)

CERN Document Server

Ney, P; Maillard, A; Polgar, K

1998-01-01

A Raman-scattering study performed on beta-BaB sub 2 O sub 4 (beta-BBO) at room temperature allows us to assign all the vibrational modes detected in the Raman spectra. The internal and external vibration modes are properly obtained by taking account of the light polarization, mode contamination and isotope effects. A correspondence between the lattice and the free-ring modes is also presented. (author)

Analysis of residual stress state in sheet metal parts processed by single point incremental forming

Science.gov (United States)

Maaß, F.; Gies, S.; Dobecki, M.; Brömmelhoff, K.; Tekkaya, A. E.; Reimers, W.

2018-05-01

The mechanical properties of formed metal components are highly affected by the prevailing residual stress state. A selective induction of residual compressive stresses in the component, can improve the product properties such as the fatigue strength. By means of single point incremental forming (SPIF), the residual stress state can be influenced by adjusting the process parameters during the manufacturing process. To achieve a fundamental understanding of the residual stress formation caused by the SPIF process, a valid numerical process model is essential. Within the scope of this paper the significance of kinematic hardening effects on the determined residual stress state is presented based on numerical simulations. The effect of the unclamping step after the manufacturing process is also analyzed. An average deviation of the residual stress amplitudes in the clamped and unclamped condition of 18 % reveals, that the unclamping step needs to be considered to reach a high numerical prediction quality.

Flexible taxonomic assignment of ambiguous sequencing reads

Directory of Open Access Journals (Sweden)

Jansson Jesper

2011-01-01

Full Text Available Abstract Background To characterize the diversity of bacterial populations in metagenomic studies, sequencing reads need to be accurately assigned to taxonomic units in a given reference taxonomy. Reads that cannot be reliably assigned to a unique leaf in the taxonomy (ambiguous reads are typically assigned to the lowest common ancestor of the set of species that match it. This introduces a potentially severe error in the estimation of bacteria present in the sample due to false positives, since all species in the subtree rooted at the ancestor are implicitly assigned to the read even though many of them may not match it. Results We present a method that maps each read to a node in the taxonomy that minimizes a penalty score while balancing the relevance of precision and recall in the assignment through a parameter q. This mapping can be obtained in time linear in the number of matching sequences, because LCA queries to the reference taxonomy take constant time. When applied to six different metagenomic datasets, our algorithm produces different taxonomic distributions depending on whether coverage or precision is maximized. Including information on the quality of the reads reduces the number of unassigned reads but increases the number of ambiguous reads, stressing the relevance of our method. Finally, two measures of performance are described and results with a set of artificially generated datasets are discussed. Conclusions The assignment strategy of sequencing reads introduced in this paper is a versatile and a quick method to study bacterial communities. The bacterial composition of the analyzed samples can vary significantly depending on how ambiguous reads are assigned depending on the value of the q parameter. Validation of our results in an artificial dataset confirm that a combination of values of q produces the most accurate results.

First Trimester Fetal Gender Assignment by Ultrasound

Directory of Open Access Journals (Sweden)

Sabahattin Altunyurt

2010-03-01

Full Text Available Objective: To investigate the efficiency of genital tubercule angle on detecting fetal gender in first trimester by ultrasonography. Material-Method: Fetal sex assignment by ultrasound was carried out in 172 pregnancies at 11-13+6 weeks between 2007 June and 2007 December. Gestational age was determined by the measurement of crown-rump length (CRL. The ultrasound predictions were compared with actual sex at birth. Mid-sagittal planes of a section of the fetal genital tubercle were performed to identify the gender. Results: 155 of 172 patients’ data were achieved. The overall success rate was 92.3 % in sonographic assignment of fetal sex. The correct assignment rate in female fetuses was significantly higher than males (95.9 % - 88.8 % [p=0,001]. The correct identification of fetal sex improved with advancing gestational age from 89.3 % between 11-11+6 weeks, 92.5 % between 12-12+6 weeks and 93.4 % between 13-13+6 weeks (p=0,96. Conclusion: The fetal sex assignment by ultrasonography between 11-13+6 weeks had high success rate. The sensitivity of fetal sex assignment was not affected with fetus position and gestational age.

Historical WBAN ID Assignments

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — 4"x6" index cards represent the first written assignments of Weather Bureau Army Navy (WBAN) station identifier numbers by the National Climatic Data Center....

Development and Application of ANN Model for Worker Assignment into Virtual Cells of Large Sized Configurations

International Nuclear Information System (INIS)

Murali, R. V.; Fathi, Khalid; Puri, A. B.

2010-01-01

This paper presents an extended version of study already undertaken on development of an artificial neural networks (ANNs) model for assigning workforce into virtual cells under virtual cellular manufacturing systems (VCMS) environments. Previously, the same authors have introduced this concept and applied it to virtual cells of two-cell configuration and the results demonstrated that ANNs could be a worth applying tool for carrying out workforce assignments. In this attempt, three-cell configurations problems are considered for worker assignment task. Virtual cells are formed under dual resource constraint (DRC) context in which the number of available workers is less than the total number of machines available. Since worker assignment tasks are quite non-linear and highly dynamic in nature under varying inputs and conditions and, in parallel, ANNs have the ability to model complex relationships between inputs and outputs and find similar patterns effectively, an attempt was earlier made to employ ANNs into the above task. In this paper, the multilayered perceptron with feed forward (MLP-FF) neural network model has been reused for worker assignment tasks of three-cell configurations under DRC context and its performance at different time periods has been analyzed. The previously proposed worker assignment model has been reconfigured and cell formation solutions available for three-cell configuration in the literature are used in combination to generate datasets for training ANNs framework. Finally, results of the study have been presented and discussed.

SCRAED - Simple and Complex Random Assignment in Experimental Designs

OpenAIRE

Alferes, Valentim R.

2009-01-01

SCRAED is a package of 37 self-contained SPSS syntax files that performs simple and complex random assignment in experimental designs. For between-subjects designs, SCRAED includes simple random assignment (no restrictions, forced equal sizes, forced unequal sizes, and unequal probabilities), block random assignment (simple and generalized blocks), and stratified random assignment (no restrictions, forced equal sizes, forced unequal sizes, and unequal probabilities). For within-subject...

Single Point Incremental Forming to increase material knowledge and production flexibility

Science.gov (United States)

Habraken, A. M.

2016-08-01

Nowadays, manufactured pieces can be divided into two groups: mass production and production of low volume number of parts. Within the second group (prototyping or small batch production), an emerging solution relies on Incremental Sheet Forming or ISF. ISF refers to processes where the plastic deformation occurs by repeated contact with a relatively small tool. More specifically, many publications over the past decade investigate Single Point Incremental Forming (SPIF) where the final shape is determined only by the tool movement. This manufacturing process is characterized by the forming of sheets by means of a CNC controlled generic tool stylus, with the sheets clamped by means of a non-workpiece-specific clamping system and in absence of a partial or a full die. The advantage is no tooling requirements and often enhanced formability, however it poses a challenge in term of process control and accuracy assurance. Note that the most commonly used materials in incremental forming are aluminum and steel alloys however other alloys are also used especially for medical industry applications, such as cobalt and chromium alloys, stainless steel and titanium alloys. Some scientists have applied incremental forming on PVC plates and other on sandwich panels composed of propylene with mild steel and aluminum metallic foams with aluminum sheet metal. Micro incremental forming of thin foils has also been developed. Starting from the scattering of the results of Finite Element (FE) simulations, when one tries to predict the tool force (see SPIF benchmark of 2014 Numisheet conference), we will see how SPIF and even micro SPIF (process applied on thin metallic sheet with a few grains within the thickness) allow investigating the material behavior. This lecture will focus on the identification of constitutive laws, on the SPIF forming mechanisms and formability as well as the failure mechanism. Different hypotheses have been proposed to explain SPIF formability, they will be

Single Point Incremental Forming to increase material knowledge and production flexibility

International Nuclear Information System (INIS)

Habraken, A.M.

2016-01-01

Nowadays, manufactured pieces can be divided into two groups: mass production and production of low volume number of parts. Within the second group (prototyping or small batch production), an emerging solution relies on Incremental Sheet Forming or ISF. ISF refers to processes where the plastic deformation occurs by repeated contact with a relatively small tool. More specifically, many publications over the past decade investigate Single Point Incremental Forming (SPIF) where the final shape is determined only by the tool movement. This manufacturing process is characterized by the forming of sheets by means of a CNC controlled generic tool stylus, with the sheets clamped by means of a non-workpiece-specific clamping system and in absence of a partial or a full die. The advantage is no tooling requirements and often enhanced formability, however it poses a challenge in term of process control and accuracy assurance. Note that the most commonly used materials in incremental forming are aluminum and steel alloys however other alloys are also used especially for medical industry applications, such as cobalt and chromium alloys, stainless steel and titanium alloys. Some scientists have applied incremental forming on PVC plates and other on sandwich panels composed of propylene with mild steel and aluminum metallic foams with aluminum sheet metal. Micro incremental forming of thin foils has also been developed. Starting from the scattering of the results of Finite Element (FE) simulations, when one tries to predict the tool force (see SPIF benchmark of 2014 Numisheet conference), we will see how SPIF and even micro SPIF (process applied on thin metallic sheet with a few grains within the thickness) allow investigating the material behavior. This lecture will focus on the identification of constitutive laws, on the SPIF forming mechanisms and formability as well as the failure mechanism. Different hypotheses have been proposed to explain SPIF formability, they will be

Impact of Intragranular Substructure Parameters on the Forming Limit Diagrams of Single-Phase B.C.C. Steels

Directory of Open Access Journals (Sweden)

Gérald Franz

2013-11-01

Full Text Available An advanced elastic-plastic self-consistent polycrystalline model, accounting for intragranular microstructure development and evolution, is coupled with a bifurcation-based localization criterion and applied to the numerical investigation of the impact of microstructural patterns on ductility of single-phase steels. The proposed multiscale model, taking into account essential microstructural aspects, such as initial and induced textures, dislocation densities, and softening mechanisms, allows us to emphasize the relationship between intragranular microstructure of B.C.C. steels and their ductility. A qualitative study in terms of forming limit diagrams for various dislocation networks, during monotonic loading tests, is conducted in order to analyze the impact of intragranular substructure parameters on the formability of single-phase B.C.C. steels.

Optical and Electrical Characteristics of Graphene Double Layer Formed by a Double Transfer of Graphene Single Layers.

Science.gov (United States)

Kim, Young Jun; Bae, Gi Yoon; Chun, Sungwoo; Park, Wanjun

2016-03-01

We demonstrate formation of double layer graphene by means of a double transfer using two single graphene layers grown by a chemical vapor deposition method. It is observed that shiftiness and broadness in the double-resonance of Raman scattering are much weaker than those of bilayer graphene formed naturally. Transport characteristics examined from transmission line measurements and field effect transistors show the similar behavior with those of single layer graphene. It indicates that interlayer separation, in electrical view, is large enough to avoid correlation between layers for the double layer structure. It is also observed from a transistor with the double layer graphene that molecules adsorpted on two inner graphene surfaces in the double layered structure are isolated and conserved from ambient environment.

1H, 15N and 13C NMR Assignments of Mouse Methionine Sulfoxide Reductase B2

Science.gov (United States)

Breivik, Åshild S.; Aachmann, Finn L.; Sal, Lena S.; Kim, Hwa-Young; Del Conte, Rebecca; Gladyshev, Vadim N.; Dikiy, Alexander

2011-01-01

A recombinant mouse methionine-r-sulfoxide reductase 2 (MsrB2ΔS) isotopically labeled with 15N and 15N/13C was generated. We report here the 1H, 15N and 13C NMR assignments of the reduced form of this protein. PMID:19636904

GENERAL ISSUES CONCERNING THE ASSIGNMENT OF SOCIAL PARTS

Directory of Open Access Journals (Sweden)

Stela Mihăilescu

2012-11-01

Full Text Available By means of the present study, we try to offer a thorough image and an analysis concerning the assignment mode of social parts within a company having limited liability. The assignment of social parts is free and unrestricted except for the cases provided by article 202, paragraph 2 from Law no. 31/ 1990- the law of commercial companies with further modifications and completions and the ones provided in OUG no. 54/ 2010 concerning some measures for fighting fiscal evasion. By means of the assignment operation a transmission is made up by an assignment of social parts contract towards one or more already associated persons in the company or towards other individual or legal persons who are going to obtain the associate quality. The principle governing any assignment is the one of goods circulation freedom, a freedom restricted only by the public order and imperative judicial norms.

Stress Assignment in Reading Italian Polysyllabic Pseudowords

Science.gov (United States)

Sulpizio, Simone; Arduino, Lisa S.; Paizi, Despina; Burani, Cristina

2013-01-01

In 4 naming experiments we investigated how Italian readers assign stress to pseudowords. We assessed whether participants assign stress following distributional information such as stress neighborhood (the proportion and number of existent words sharing orthographic ending and stress pattern) and whether such distributional information affects…

No Randomization? No Problem: Experimental Control and Random Assignment in Single Case Research

Science.gov (United States)

Ledford, Jennifer R.

2018-01-01

Randomization of large number of participants to different treatment groups is often not a feasible or preferable way to answer questions of immediate interest to professional practice. Single case designs (SCDs) are a class of research designs that are experimental in nature but require only a few participants, all of whom receive the…

Integer Linear Programming for Constrained Multi-Aspect Committee Review Assignment

Science.gov (United States)

Karimzadehgan, Maryam; Zhai, ChengXiang

2011-01-01

Automatic review assignment can significantly improve the productivity of many people such as conference organizers, journal editors and grant administrators. A general setup of the review assignment problem involves assigning a set of reviewers on a committee to a set of documents to be reviewed under the constraint of review quota so that the reviewers assigned to a document can collectively cover multiple topic aspects of the document. No previous work has addressed such a setup of committee review assignments while also considering matching multiple aspects of topics and expertise. In this paper, we tackle the problem of committee review assignment with multi-aspect expertise matching by casting it as an integer linear programming problem. The proposed algorithm can naturally accommodate any probabilistic or deterministic method for modeling multiple aspects to automate committee review assignments. Evaluation using a multi-aspect review assignment test set constructed using ACM SIGIR publications shows that the proposed algorithm is effective and efficient for committee review assignments based on multi-aspect expertise matching. PMID:22711970

Assignment and Correspondence Tracking System - Tactical / Operational Reporting

Data.gov (United States)

Social Security Administration — Reporting data store for the Assignment and Correspondence Tracking System (ACT). ACT automates the assignment and tracking of correspondence processing within the...

Statistical aspects of optimal treatment assignment

OpenAIRE

van der Linden, Willem J.

1980-01-01

The issues of treatment assignment is ordinarily dealt with within the framework of testing aptitude treatment interaction (ATI) hypothesis. ATI research mostly uses linear regression techniques, and an ATI exists when the aptitude treatment (AT) regression lines cross each other within the relevant interval of the aptitude variable. Consistent with this approach is the use of the points of interaction of AT regression lines as treatment-assignment rule. The replacement of such rules by monot...

One of My Favorite Assignments: Automated Teller Machine Simulation.

Science.gov (United States)

Oberman, Paul S.

2001-01-01

Describes an assignment for an introductory computer science class that requires the student to write a software program that simulates an automated teller machine. Highlights include an algorithm for the assignment; sample file contents; language features used; assignment variations; and discussion points. (LRW)

7 CFR 1900.5 - Assignment of cases.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Assignment of cases. 1900.5 Section 1900.5 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS... REGULATIONS GENERAL Delegations of Authority § 1900.5 Assignment of cases. The State Director may, in writing...

METHOD FOR SOLVING FUZZY ASSIGNMENT PROBLEM USING MAGNITUDE RANKING TECHNIQUE

OpenAIRE

D. Selvi; R. Queen Mary; G. Velammal

2017-01-01

Assignment problems have various applications in the real world because of their wide applicability in industry, commerce, management science, etc. Traditional classical assignment problems cannot be successfully used for real life problem, hence the use of fuzzy assignment problems is more appropriate. In this paper, the fuzzy assignment problem is formulated to crisp assignment problem using Magnitude Ranking technique and Hungarian method has been applied to find an optimal solution. The N...

Towards fully automated structure-based NMR resonance assignment of 15N-labeled proteins from automatically picked peaks

KAUST Repository

Jang, Richard; Gao, Xin; Li, Ming

2011-01-01

In NMR resonance assignment, an indispensable step in NMR protein studies, manually processed peaks from both N-labeled and C-labeled spectra are typically used as inputs. However, the use of homologous structures can allow one to use only N-labeled NMR data and avoid the added expense of using C-labeled data. We propose a novel integer programming framework for structure-based backbone resonance assignment using N-labeled data. The core consists of a pair of integer programming models: one for spin system forming and amino acid typing, and the other for backbone resonance assignment. The goal is to perform the assignment directly from spectra without any manual intervention via automatically picked peaks, which are much noisier than manually picked peaks, so methods must be error-tolerant. In the case of semi-automated/manually processed peak data, we compare our system with the Xiong-Pandurangan-Bailey- Kellogg's contact replacement (CR) method, which is the most error-tolerant method for structure-based resonance assignment. Our system, on average, reduces the error rate of the CR method by five folds on their data set. In addition, by using an iterative algorithm, our system has the added capability of using the NOESY data to correct assignment errors due to errors in predicting the amino acid and secondary structure type of each spin system. On a publicly available data set for human ubiquitin, where the typing accuracy is 83%, we achieve 91% accuracy, compared to the 59% accuracy obtained without correcting for such errors. In the case of automatically picked peaks, using assignment information from yeast ubiquitin, we achieve a fully automatic assignment with 97% accuracy. To our knowledge, this is the first system that can achieve fully automatic structure-based assignment directly from spectra. This has implications in NMR protein mutant studies, where the assignment step is repeated for each mutant. © Copyright 2011, Mary Ann Liebert, Inc.

Towards fully automated structure-based NMR resonance assignment of 15N-labeled proteins from automatically picked peaks

KAUST Repository

Jang, Richard

2011-03-01

In NMR resonance assignment, an indispensable step in NMR protein studies, manually processed peaks from both N-labeled and C-labeled spectra are typically used as inputs. However, the use of homologous structures can allow one to use only N-labeled NMR data and avoid the added expense of using C-labeled data. We propose a novel integer programming framework for structure-based backbone resonance assignment using N-labeled data. The core consists of a pair of integer programming models: one for spin system forming and amino acid typing, and the other for backbone resonance assignment. The goal is to perform the assignment directly from spectra without any manual intervention via automatically picked peaks, which are much noisier than manually picked peaks, so methods must be error-tolerant. In the case of semi-automated/manually processed peak data, we compare our system with the Xiong-Pandurangan-Bailey- Kellogg\\'s contact replacement (CR) method, which is the most error-tolerant method for structure-based resonance assignment. Our system, on average, reduces the error rate of the CR method by five folds on their data set. In addition, by using an iterative algorithm, our system has the added capability of using the NOESY data to correct assignment errors due to errors in predicting the amino acid and secondary structure type of each spin system. On a publicly available data set for human ubiquitin, where the typing accuracy is 83%, we achieve 91% accuracy, compared to the 59% accuracy obtained without correcting for such errors. In the case of automatically picked peaks, using assignment information from yeast ubiquitin, we achieve a fully automatic assignment with 97% accuracy. To our knowledge, this is the first system that can achieve fully automatic structure-based assignment directly from spectra. This has implications in NMR protein mutant studies, where the assignment step is repeated for each mutant. © Copyright 2011, Mary Ann Liebert, Inc.

A high excitation magnetic quadrupole lens quadruplet incorporating a single octupole lens for a low spherical aberration probe forming lens system

Science.gov (United States)

Dou, Yanxin; Jamieson, David N.; Liu, Jianli; Li, Liyi

2018-03-01

This paper describes the design of a new probe forming lens system consisting of a high excitation magnetic quadrupole lens quadruplet that incorporates a single magnetic octupole lens. This system achieves both a high demagnification and a low spherical aberration compared to conventional high excitation systems and is intended for deployment for the Harbin 300 MeV proton microprobe for applications in space science and ion beam therapy. This relative simplicity of the ion optical design to include a single octupole lens minimizes the risks associated with the constructional and operational precision usually needed for the probe forming lens system and this system could also be deployed in microprobe systems that operate with less magnetically rigid ions. The design of the new system is validated with reference to two independent ion optical computer codes.

A probabilistic approach for validating protein NMR chemical shift assignments

International Nuclear Information System (INIS)

Wang Bowei; Wang, Yunjun; Wishart, David S.

2010-01-01

It has been estimated that more than 20% of the proteins in the BMRB are improperly referenced and that about 1% of all chemical shift assignments are mis-assigned. These statistics also reflect the likelihood that any newly assigned protein will have shift assignment or shift referencing errors. The relatively high frequency of these errors continues to be a concern for the biomolecular NMR community. While several programs do exist to detect and/or correct chemical shift mis-referencing or chemical shift mis-assignments, most can only do one, or the other. The one program (SHIFTCOR) that is capable of handling both chemical shift mis-referencing and mis-assignments, requires the 3D structure coordinates of the target protein. Given that chemical shift mis-assignments and chemical shift re-referencing issues should ideally be addressed prior to 3D structure determination, there is a clear need to develop a structure-independent approach. Here, we present a new structure-independent protocol, which is based on using residue-specific and secondary structure-specific chemical shift distributions calculated over small (3-6 residue) fragments to identify mis-assigned resonances. The method is also able to identify and re-reference mis-referenced chemical shift assignments. Comparisons against existing re-referencing or mis-assignment detection programs show that the method is as good or superior to existing approaches. The protocol described here has been implemented into a freely available Java program called 'Probabilistic Approach for protein Nmr Assignment Validation (PANAV)' and as a web server (http://redpoll.pharmacy.ualberta.ca/PANAVhttp://redpoll.pharmacy.ualberta.ca/PANAV) which can be used to validate and/or correct as well as re-reference assigned protein chemical shifts.

Quality of pharmacy-specific Medical Subject Headings (MeSH) assignment in pharmacy journals indexed in MEDLINE.

Science.gov (United States)

Minguet, Fernando; Salgado, Teresa M; van den Boogerd, Lucienne; Fernandez-Llimos, Fernando

2015-01-01

The Medical Subject Headings (MeSH) is the National Library of Medicine (NLM) controlled vocabulary for indexing articles. Inaccuracies in the MeSH thesaurus have been reported for several areas including pharmacy. To assess the quality of pharmacy-specific MeSH assignment to articles indexed in pharmacy journals. The 10 journals containing the highest number of articles published in 2012 indexed under the MeSH 'Pharmacists' were identified. All articles published over a 5-year period (2008-2012) in the 10 previously selected journals were retrieved from PubMed. MeSH terms used to index these articles were extracted and pharmacy-specific MeSH terms were identified. The frequency of use of pharmacy-specific MeSH terms was calculated across journals. A total of 6989 articles were retrieved from the 10 pharmacy journals, of which 328 (4.7%) were articles not fully indexed and therefore did not contain any MeSH terms assigned. Among the 6661 articles fully indexed, the mean number of MeSH terms was 10.1 (SD = 4.0), being 1.0 (SD = 1.3) considered as Major MeSH. Both values significantly varied across journals. The mean number of pharmacy-specific MeSH terms per article was 0.9 (SD = 1.2). A total of 3490 (52.4%) of the 6661 articles were indexed in pharmacy journals without a single pharmacy-specific MeSH. Of the total 67193 MeSH terms assigned to articles, on average 10.5% (SD = 13.9) were pharmacy-specific MeSH. A statistically significant different pattern of pharmacy-specific MeSH assignment was identified across journals (Kruskal-Wallis P journals can be improved to further enhance evidence gathering in pharmacy. Over half of the articles published in the top-10 journals publishing pharmacy literature were indexed without a single pharmacy-specific MeSH. Copyright © 2015 Elsevier Inc. All rights reserved.

Resonance assignment of the NMR spectra of disordered proteins using a multi-objective non-dominated sorting genetic algorithm

International Nuclear Information System (INIS)

Yang, Yu; Fritzsching, Keith J.; Hong, Mei

2013-01-01

A multi-objective genetic algorithm is introduced to predict the assignment of protein solid-state NMR (SSNMR) spectra with partial resonance overlap and missing peaks due to broad linewidths, molecular motion, and low sensitivity. This non-dominated sorting genetic algorithm II (NSGA-II) aims to identify all possible assignments that are consistent with the spectra and to compare the relative merit of these assignments. Our approach is modeled after the recently introduced Monte-Carlo simulated-annealing (MC/SA) protocol, with the key difference that NSGA-II simultaneously optimizes multiple assignment objectives instead of searching for possible assignments based on a single composite score. The multiple objectives include maximizing the number of consistently assigned peaks between multiple spectra (“good connections”), maximizing the number of used peaks, minimizing the number of inconsistently assigned peaks between spectra (“bad connections”), and minimizing the number of assigned peaks that have no matching peaks in the other spectra (“edges”). Using six SSNMR protein chemical shift datasets with varying levels of imperfection that was introduced by peak deletion, random chemical shift changes, and manual peak picking of spectra with moderately broad linewidths, we show that the NSGA-II algorithm produces a large number of valid and good assignments rapidly. For high-quality chemical shift peak lists, NSGA-II and MC/SA perform similarly well. However, when the peak lists contain many missing peaks that are uncorrelated between different spectra and have chemical shift deviations between spectra, the modified NSGA-II produces a larger number of valid solutions than MC/SA, and is more effective at distinguishing good from mediocre assignments by avoiding the hazard of suboptimal weighting factors for the various objectives. These two advantages, namely diversity and better evaluation, lead to a higher probability of predicting the correct

Resonance assignment of the NMR spectra of disordered proteins using a multi-objective non-dominated sorting genetic algorithm.

Science.gov (United States)

Yang, Yu; Fritzsching, Keith J; Hong, Mei

2013-11-01

A multi-objective genetic algorithm is introduced to predict the assignment of protein solid-state NMR (SSNMR) spectra with partial resonance overlap and missing peaks due to broad linewidths, molecular motion, and low sensitivity. This non-dominated sorting genetic algorithm II (NSGA-II) aims to identify all possible assignments that are consistent with the spectra and to compare the relative merit of these assignments. Our approach is modeled after the recently introduced Monte-Carlo simulated-annealing (MC/SA) protocol, with the key difference that NSGA-II simultaneously optimizes multiple assignment objectives instead of searching for possible assignments based on a single composite score. The multiple objectives include maximizing the number of consistently assigned peaks between multiple spectra ("good connections"), maximizing the number of used peaks, minimizing the number of inconsistently assigned peaks between spectra ("bad connections"), and minimizing the number of assigned peaks that have no matching peaks in the other spectra ("edges"). Using six SSNMR protein chemical shift datasets with varying levels of imperfection that was introduced by peak deletion, random chemical shift changes, and manual peak picking of spectra with moderately broad linewidths, we show that the NSGA-II algorithm produces a large number of valid and good assignments rapidly. For high-quality chemical shift peak lists, NSGA-II and MC/SA perform similarly well. However, when the peak lists contain many missing peaks that are uncorrelated between different spectra and have chemical shift deviations between spectra, the modified NSGA-II produces a larger number of valid solutions than MC/SA, and is more effective at distinguishing good from mediocre assignments by avoiding the hazard of suboptimal weighting factors for the various objectives. These two advantages, namely diversity and better evaluation, lead to a higher probability of predicting the correct assignment for a

Testing the Effectiveness of Online Assignments in Theory of Finance

Science.gov (United States)

Batu, Michael; Bower, Nancy; Lun, Esmond; Sadanand, Asha

2018-01-01

The authors investigated the effectiveness of online versus paper assignments using final examination scores in three cohorts of theory of finance. In particular, two cohorts were exposed to online assignments while another cohort was exposed to traditional assignments. The central result is that exposure to online assignments robustly leads to…

12 CFR 563e.28 - Assigned ratings.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Assigned ratings. 563e.28 Section 563e.28 Banks... for Assessing Performance § 563e.28 Assigned ratings. (a) Ratings in general. Subject to paragraphs (b... performance under the lending, investment and service tests, the community development test, the small savings...

Privacy-Preserving Task Assignment in Spatial Crowdsourcing

KAUST Repository

Liu, An

2017-09-20

With the progress of mobile devices and wireless networks, spatial crowdsourcing (SC) is emerging as a promising approach for problem solving. In SC, spatial tasks are assigned to and performed by a set of human workers. To enable effective task assignment, however, both workers and task requesters are required to disclose their locations to untrusted SC systems. In this paper, we study the problem of assigning workers to tasks in a way that location privacy for both workers and task requesters is preserved. We first combine the Paillier cryptosystem with Yao’s garbled circuits to construct a secure protocol that assigns the nearest worker to a task. Considering that this protocol cannot scale to a large number of workers, we then make use of Geohash, a hierarchical spatial index to design a more efficient protocol that can securely find approximate nearest workers. We theoretically show that these two protocols are secure against semi-honest adversaries. Through extensive experiments on two real-world datasets, we demonstrate the efficiency and effectiveness of our protocols.

Single Stage Tandem Mass Spectrometry Assignment of the C-5 Uronic Acid Stereochemistry in Heparan Sulfate Tetrasaccharides using Electron Detachment Dissociation

NARCIS (Netherlands)

Agyekum, Isaac; Zong, Chengli; Boons, Geert-Jan; Amster, I. Jonathan

The analysis of heparan sulfate (HS) glycosaminoglycans presents many challenges, due to the high degree of structural heterogeneity arising from their non-template biosynthesis. Complete structural elucidation of glycosaminoglycans necessitates the unambiguous assignments of sulfo modifications and

Crystal ball single event display

International Nuclear Information System (INIS)

Grosnick, D.; Gibson, A.; Allgower, C.; Alyea, J.; Argonne National Lab., IL

1997-01-01

The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about π o 's and η's formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer

Incorporating breeding abundance into spatial assignments on continuous surfaces.

Science.gov (United States)

Rushing, Clark S; Marra, Peter P; Studds, Colin E

2017-06-01

Determining the geographic connections between breeding and nonbreeding populations, termed migratory connectivity, is critical to advancing our understanding of the ecology and conservation of migratory species. Assignment models based on stable isotopes historically have been an important tool for studying migratory connectivity of small-bodied species, but the low resolution of these assignments has generated interest into combining isotopes with other sources in information. Abundance is one of the most appealing data sources to include in isotope-based assignments, but there are currently no statistical methods or guidelines for optimizing the contribution of stable isotopes and abundance for inferring migratory connectivity. Using known-origin stable-hydrogen isotope samples of six Neotropical migratory bird species, we rigorously assessed the performance of assignment models that differentially weight the contribution of the isotope and abundance data. For two species with adequate sample sizes, we used Pareto optimality to determine the set of models that simultaneously minimized both assignment error rate and assignment area. We then assessed the ability of the top models from these two species to improve assignments of the remaining four species compared to assignments based on isotopes alone. We show that the increased precision of models that include abundance is often offset by a large increase in assignment error. However, models that optimally weigh the abundance data relative to the isotope data can result in higher precision and, in some cases, lower error than models based on isotopes alone. The top models, however, depended on the distribution of relative breeding abundance, with patchier distributions requiring stronger downweighting of abundance, and we present general guidelines for future studies. These results confirm that breeding abundance can be an important source of information for studies investigating broad-scale movements of

Phase transitions of antibiotic clarithromycin forms I, IV and new form VII crystals.

Science.gov (United States)

Ito, Masataka; Shiba, Rika; Watanabe, Miteki; Iwao, Yasunori; Itai, Shigeru; Noguchi, Shuji

2018-06-01

Metastable crystal form I of the antibiotic clarithromycin has a pharmaceutically valuable characteristic that its crystalline phase transition can be applied for its sustained release from tablets. The phase transition of form I was investigated in detail by single crystal and powder X-ray analyses, dynamic vapor sorption analysis and thermal analysis. The single crystal structure of form I revealed that form I was not an anhydrate crystal but contained a partially occupied water molecule in the channel-like void space. Dynamic vapor sorption (DVS) analysis demonstrated that form I crystals reversibly sorbed water molecules in two steps when the relative humidity (RH) increased and finally transited to hydrate form IV at 95% RH. DVS analysis also showed that when the RH decreased form IV crystals lost water molecules at 40% RH and transited to the newly identified anhydrate crystal form VII. Form VII reversibly transited to form IV at lower RH than form I, suggesting that form I is more suitable for manufacturing a sustained-release tablet of CAM utilizing the crystalline phase transition. Copyright © 2018 Elsevier B.V. All rights reserved.

Dual earners’ willingness to accept an international assignment.

NARCIS (Netherlands)

van der Velde, E.G.; Bossink, C.J.H.; Jansen, P.G.W.

2005-01-01

Multinational organisations experience difficulties in finding managers willing to accept international assignments. This study has therefore focused on factors that can predict males' and females' willingness to accept international assignments, or to follow their partners on international

Task assignment and coaching

NARCIS (Netherlands)

Dominguez-Martinez, S.

2009-01-01

An important task of a manager is to motivate her subordinates. One way in which a manager can give incentives to junior employees is through the assignment of tasks. How a manager allocates tasks in an organization, provides information to the junior employees about his ability. Without coaching

Comparison of plastic strains on AA5052 by single point incremental forming process using digital image processing

International Nuclear Information System (INIS)

Mugendiran, V.; Gnanavelbabu, A.

2017-01-01

In this study, a surface based strain measurement was used to determine the formability of the sheet metal. A strain measurement may employ manual calculation of plastic strains based on the reference circle and the deformed circle. The manual calculation method has a greater margin of error in the practical applications. In this paper, an attempt has been made to compare the formability by implementing three different theoretical approaches: Namely conventional method, least square method and digital based strain measurements. As the sheet metal was formed by a single point incremental process the etched circles get deformed into elliptical shapes approximately, image acquisition has been done before and after forming. The plastic strains of the deformed circle grids are calculated based on the non- deformed reference. The coordinates of the deformed circles are measured by various image processing steps. Finally the strains obtained from the deformed circle are used to plot the forming limit diagram. To evaluate the accuracy of the system, the conventional, least square and digital based method of prediction of the forming limit diagram was compared. Conventional method and least square method have marginal error when compared with digital based processing method. Measurement of strain based on image processing agrees well and can be used to improve the accuracy and to reduce the measurement error in prediction of forming limit diagram.

Comparison of plastic strains on AA5052 by single point incremental forming process using digital image processing

Energy Technology Data Exchange (ETDEWEB)

Mugendiran, V.; Gnanavelbabu, A. [Anna University, Chennai, Tamilnadu (India)

2017-06-15

In this study, a surface based strain measurement was used to determine the formability of the sheet metal. A strain measurement may employ manual calculation of plastic strains based on the reference circle and the deformed circle. The manual calculation method has a greater margin of error in the practical applications. In this paper, an attempt has been made to compare the formability by implementing three different theoretical approaches: Namely conventional method, least square method and digital based strain measurements. As the sheet metal was formed by a single point incremental process the etched circles get deformed into elliptical shapes approximately, image acquisition has been done before and after forming. The plastic strains of the deformed circle grids are calculated based on the non- deformed reference. The coordinates of the deformed circles are measured by various image processing steps. Finally the strains obtained from the deformed circle are used to plot the forming limit diagram. To evaluate the accuracy of the system, the conventional, least square and digital based method of prediction of the forming limit diagram was compared. Conventional method and least square method have marginal error when compared with digital based processing method. Measurement of strain based on image processing agrees well and can be used to improve the accuracy and to reduce the measurement error in prediction of forming limit diagram.

Empirical evaluation of DArT, SNP, and SSR marker-systems for genotyping, clustering, and assigning sugar beet hybrid varieties into populations

NARCIS (Netherlands)

Simko, I.; Eujayl, I.; Hintum, van T.J.L.

2012-01-01

Dominant and co-dominant molecular markers are routinely used in plant genetic research. In the present study we assessed the success-rate of three marker-systems for estimating genotypic diversity, clustering varieties into populations, and assigning a single variety into the expected population. A

Empirical evaluation of DArT, SNP, and SSR marker-systems for genotyping, clustering, and assigning sugar beet hybrid varieties into populations

Science.gov (United States)

Dominant and co-dominant molecular markers are routinely used in plant genetic diversity research. In the present study we assessed the success-rate of three marker-systems for estimating genotypic diversity, clustering varieties into populations, and assigning a single variety into the expected pop...

Further exploration of the conformational space of α-synuclein fibrils: solid-state NMR assignment of a high-pH polymorph.

Science.gov (United States)

Verasdonck, Joeri; Bousset, Luc; Gath, Julia; Melki, Ronald; Böckmann, Anja; Meier, Beat H

2016-04-01

Polymorphism is a common and important phenomenon for protein fibrils which has been linked to the appearance of strains in prion and other neurodegenerative diseases. Parkinson disease is a frequently occurring neurodegenerative pathology, tightly associated with the formation of Lewy bodies. These deposits mainly consist of α-synuclein in fibrillar, β-sheet-rich form. α-synuclein is known to form numerous different polymorphs, which show distinct structural features. Here, we describe the chemical shift assignments, and derive the secondary structure, of a polymorph that was fibrillized at higher-than-physiological pH conditions. The fibrillar core contains residues 40-95, with both the C- and N-terminus not showing any ordered, rigid parts. The chemical shifts are similar to those recorded previously for an assigned polymorph that was fibrillized at neutral pH.

A linear program for assessing the assignment and scheduling of radioactive wastes for disposal to sea

International Nuclear Information System (INIS)

Hutchinson, W.

1983-04-01

The report takes the form of a user guide to a computer program using linear programming techniques to aid the assignment and scheduling of radioactive wastes for disposal to sea. The program is aimed at the identification of 'optimum' amounts of each waste stream for disposal to sea without violating specific constraints values and/or fairness parameters. (author)

SOLUTION OF MICROECONOMICS ASSIGNMENTS BY THE MEANS OF PROGRAM MODULES ISPEZ ON THE DISTANCE PLATFORM MOODLE

Directory of Open Access Journals (Sweden)

V. М. Kobets

2010-04-01

Full Text Available In article basic aspects introduction integrated environment verification knowledge students from microeconomic are expounded. It is considered structure of Decision Environmental with the built-in program modules (mathematical and graphical editors for the decision of typical assignments from microeconomics during the current and final control of students’ knowledges of different forms of teaching.

Use of prelecture assignment to enhance learning in pharmacology lectures for the 2nd year medical students

OpenAIRE

Ahsan, Marya; Mallick, Ayaz Khurram

2016-01-01

Objectives: Majority of teaching hours allotted by the Medical Council of India in pharmacology are utilized in the form of didactic lecture. Although these lectures are an excellent tool to deliver the information to a large group of students, it usually ends up as a one-sided teaching session with most students being the passive listeners. To make these lectures interesting and effective, we introduced the students to prelecture assignment (PLA) in the form of clinical case before the deliv...

Calibrated peer review assignments for the earth sciences

Science.gov (United States)

Rudd, J.A.; Wang, V.Z.; Cervato, C.; Ridky, R.W.

2009-01-01

Calibrated Peer Review ??? (CPR), a web-based instructional tool developed as part of the National Science Foundation reform initiatives in undergraduate science education, allows instructors to incorporate multiple writing assignments in large courses without overwhelming the instructor. This study reports successful implementation of CPR in a large, introductory geology course and student learning of geoscience content. For each CPR assignment in this study, students studied web-based and paper resources, wrote an essay, and reviewed seven essays (three from the instructor, three from peers, and their own) on the topic. Although many students expressed negative attitudes and concerns, particularly about the peer review process of this innovative instructional approach, they also recognized the learning potential of completing CPR assignments. Comparing instruction on earthquakes and plate boundaries using a CPR assignment vs. an instructional video lecture and homework essay with extensive instructor feedback, students mastered more content via CPR instruction.

Subcarrier Group Assignment for MC-CDMA Wireless Networks

Directory of Open Access Journals (Sweden)

Le-Ngoc Tho

2007-01-01

Full Text Available Two interference-based subcarrier group assignment strategies in dynamic resource allocation are proposed for MC-CDMA wireless systems to achieve high throughput in a multicell environment. Least interfered group assignment (LIGA selects for each session the subcarrier group on which the user receives the minimum interference, while best channel ratio group assignment (BCRGA chooses the subcarrier group with the largest channel response-to-interference ratio. Both analytical framework and simulation model are developed for evaluation of throughput distribution of the proposed schemes. An iterative approach is devised to handle the complex interdependency between multicell interference profiles in the throughput analysis. Illustrative results show significant throughput improvement offered by the interference-based assignment schemes for MC-CDMA multicell wireless systems. In particular, under low loading conditions, LIGA renders the best performance. However, as the load increases BCRGA tends to offer superior performance.

Subcarrier Group Assignment for MC-CDMA Wireless Networks

Directory of Open Access Journals (Sweden)

Tho Le-Ngoc

2007-12-01

Full Text Available Two interference-based subcarrier group assignment strategies in dynamic resource allocation are proposed for MC-CDMA wireless systems to achieve high throughput in a multicell environment. Least interfered group assignment (LIGA selects for each session the subcarrier group on which the user receives the minimum interference, while best channel ratio group assignment (BCRGA chooses the subcarrier group with the largest channel response-to-interference ratio. Both analytical framework and simulation model are developed for evaluation of throughput distribution of the proposed schemes. An iterative approach is devised to handle the complex interdependency between multicell interference profiles in the throughput analysis. Illustrative results show significant throughput improvement offered by the interference-based assignment schemes for MC-CDMA multicell wireless systems. In particular, under low loading conditions, LIGA renders the best performance. However, as the load increases BCRGA tends to offer superior performance.

RNA-PAIRS: RNA probabilistic assignment of imino resonance shifts

International Nuclear Information System (INIS)

Bahrami, Arash; Clos, Lawrence J.; Markley, John L.; Butcher, Samuel E.; Eghbalnia, Hamid R.

2012-01-01

The significant biological role of RNA has further highlighted the need for improving the accuracy, efficiency and the reach of methods for investigating RNA structure and function. Nuclear magnetic resonance (NMR) spectroscopy is vital to furthering the goals of RNA structural biology because of its distinctive capabilities. However, the dispersion pattern in the NMR spectra of RNA makes automated resonance assignment, a key step in NMR investigation of biomolecules, remarkably challenging. Herein we present RNA Probabilistic Assignment of Imino Resonance Shifts (RNA-PAIRS), a method for the automated assignment of RNA imino resonances with synchronized verification and correction of predicted secondary structure. RNA-PAIRS represents an advance in modeling the assignment paradigm because it seeds the probabilistic network for assignment with experimental NMR data, and predicted RNA secondary structure, simultaneously and from the start. Subsequently, RNA-PAIRS sets in motion a dynamic network that reverberates between predictions and experimental evidence in order to reconcile and rectify resonance assignments and secondary structure information. The procedure is halted when assignments and base-parings are deemed to be most consistent with observed crosspeaks. The current implementation of RNA-PAIRS uses an initial peak list derived from proton-nitrogen heteronuclear multiple quantum correlation ( 1 H– 15 N 2D HMQC) and proton–proton nuclear Overhauser enhancement spectroscopy ( 1 H– 1 H 2D NOESY) experiments. We have evaluated the performance of RNA-PAIRS by using it to analyze NMR datasets from 26 previously studied RNAs, including a 111-nucleotide complex. For moderately sized RNA molecules, and over a range of comparatively complex structural motifs, the average assignment accuracy exceeds 90%, while the average base pair prediction accuracy exceeded 93%. RNA-PAIRS yielded accurate assignments and base pairings consistent with imino resonances for a

RNA-PAIRS: RNA probabilistic assignment of imino resonance shifts

Energy Technology Data Exchange (ETDEWEB)

Bahrami, Arash; Clos, Lawrence J.; Markley, John L.; Butcher, Samuel E. [National Magnetic Resonance Facility at Madison (United States); Eghbalnia, Hamid R., E-mail: eghbalhd@uc.edu [University of Cincinnati, Department of Molecular and Cellular Physiology (United States)

2012-04-15

The significant biological role of RNA has further highlighted the need for improving the accuracy, efficiency and the reach of methods for investigating RNA structure and function. Nuclear magnetic resonance (NMR) spectroscopy is vital to furthering the goals of RNA structural biology because of its distinctive capabilities. However, the dispersion pattern in the NMR spectra of RNA makes automated resonance assignment, a key step in NMR investigation of biomolecules, remarkably challenging. Herein we present RNA Probabilistic Assignment of Imino Resonance Shifts (RNA-PAIRS), a method for the automated assignment of RNA imino resonances with synchronized verification and correction of predicted secondary structure. RNA-PAIRS represents an advance in modeling the assignment paradigm because it seeds the probabilistic network for assignment with experimental NMR data, and predicted RNA secondary structure, simultaneously and from the start. Subsequently, RNA-PAIRS sets in motion a dynamic network that reverberates between predictions and experimental evidence in order to reconcile and rectify resonance assignments and secondary structure information. The procedure is halted when assignments and base-parings are deemed to be most consistent with observed crosspeaks. The current implementation of RNA-PAIRS uses an initial peak list derived from proton-nitrogen heteronuclear multiple quantum correlation ({sup 1}H-{sup 15}N 2D HMQC) and proton-proton nuclear Overhauser enhancement spectroscopy ({sup 1}H-{sup 1}H 2D NOESY) experiments. We have evaluated the performance of RNA-PAIRS by using it to analyze NMR datasets from 26 previously studied RNAs, including a 111-nucleotide complex. For moderately sized RNA molecules, and over a range of comparatively complex structural motifs, the average assignment accuracy exceeds 90%, while the average base pair prediction accuracy exceeded 93%. RNA-PAIRS yielded accurate assignments and base pairings consistent with imino

Interactive visual exploration and refinement of cluster assignments.

Science.gov (United States)

Kern, Michael; Lex, Alexander; Gehlenborg, Nils; Johnson, Chris R

2017-09-12

With ever-increasing amounts of data produced in biology research, scientists are in need of efficient data analysis methods. Cluster analysis, combined with visualization of the results, is one such method that can be used to make sense of large data volumes. At the same time, cluster analysis is known to be imperfect and depends on the choice of algorithms, parameters, and distance measures. Most clustering algorithms don't properly account for ambiguity in the source data, as records are often assigned to discrete clusters, even if an assignment is unclear. While there are metrics and visualization techniques that allow analysts to compare clusterings or to judge cluster quality, there is no comprehensive method that allows analysts to evaluate, compare, and refine cluster assignments based on the source data, derived scores, and contextual data. In this paper, we introduce a method that explicitly visualizes the quality of cluster assignments, allows comparisons of clustering results and enables analysts to manually curate and refine cluster assignments. Our methods are applicable to matrix data clustered with partitional, hierarchical, and fuzzy clustering algorithms. Furthermore, we enable analysts to explore clustering results in context of other data, for example, to observe whether a clustering of genomic data results in a meaningful differentiation in phenotypes. Our methods are integrated into Caleydo StratomeX, a popular, web-based, disease subtype analysis tool. We show in a usage scenario that our approach can reveal ambiguities in cluster assignments and produce improved clusterings that better differentiate genotypes and phenotypes.

Student generated assignments about electrical circuits in a computer simulation

NARCIS (Netherlands)

Vreman-de Olde, Cornelise; de Jong, Anthonius J.M.

2004-01-01

In this study we investigated the design of assignments by students as a knowledge-generating activity. Students were required to design assignments for 'other students' in a computer simulation environment about electrical circuits. Assignments consisted of a question, alternatives, and feedback on

Computational assignment of redox states to Coulomb blockade diamonds.

Science.gov (United States)

Olsen, Stine T; Arcisauskaite, Vaida; Hansen, Thorsten; Kongsted, Jacob; Mikkelsen, Kurt V

2014-09-07

With the advent of molecular transistors, electrochemistry can now be studied at the single-molecule level. Experimentally, the redox chemistry of the molecule manifests itself as features in the observed Coulomb blockade diamonds. We present a simple theoretical method for explicit construction of the Coulomb blockade diamonds of a molecule. A combined quantum mechanical/molecular mechanical method is invoked to calculate redox energies and polarizabilities of the molecules, including the screening effect of the metal leads. This direct approach circumvents the need for explicit modelling of the gate electrode. From the calculated parameters the Coulomb blockade diamonds are constructed using simple theory. We offer a theoretical tool for assignment of Coulomb blockade diamonds to specific redox states in particular, and a study of chemical details in the diamonds in general. With the ongoing experimental developments in molecular transistor experiments, our tool could find use in molecular electronics, electrochemistry, and electrocatalysis.

On pole structure assignment in linear systems

Czech Academy of Sciences Publication Activity Database

Loiseau, J.-J.; Zagalak, Petr

2009-01-01

Roč. 82, č. 7 (2009), s. 1179-1192 ISSN 0020-7179 R&D Projects: GA ČR(CZ) GA102/07/1596 Institutional research plan: CEZ:AV0Z10750506 Keywords : linear systems * linear state feedback * pole structure assignment Subject RIV: BC - Control Systems Theory Impact factor: 1.124, year: 2009 http://library.utia.cas.cz/separaty/2009/AS/zagalak-on pole structure assignment in linear systems.pdf

Single-Point Incremental Forming of Two Biocompatible Polymers: An Insight into Their Thermal and Structural Properties

Directory of Open Access Journals (Sweden)

Luis Marcelo Lozano-Sánchez

2018-04-01

Full Text Available Sheets of polycaprolactone (PCL and ultra-high molecular weight polyethylene (UHMWPE were fabricated and shaped by the Single-Point Incremental Forming process (SPIF. The performance of these biocompatible polymers in SPIF was assessed through the variation of four main parameters: the diameter of the forming tool, the spindle speed, the feed rate, and the step size based on a Box–Behnken design of experiments of four variables and three levels. The design of experiments allowed us to identify the parameters that most affect the forming of PCL and UHMWPE. The study was completed by means of a deep characterization of the thermal and structural properties of both polymers. These properties were correlated to the performance of the polymers observed in SPIF, and it was found that the polymer chains are oriented as a consequence of the SPIF processing. Moreover, by X-ray diffraction it was proved that polymer chains behave differently on each surface of the fabricated parts, since the chains on the surface in contact with the forming tool are oriented horizontally, while on the opposite surface they are oriented in the vertical direction. The unit cell of UHMWPE is distorted, passing from an orthorhombic cell to a monoclinic due to the slippage between crystallites. This slippage between crystallites was observed in both PCL and UHMWPE, and was identified as an alpha star thermal transition located in the rubbery region between the glass transition and the melting point of each polymer.

Optical properties of tungsten disulfide single crystals doped with gold

International Nuclear Information System (INIS)

Dumcenco, D.O.; Hsu, H.P.; Huang, Y.S.; Liang, C.H.; Tiong, K.K.; Du, C.H.

2008-01-01

Single crystals of WS 2 doped with gold have been grown by the chemical vapour transport method using iodine as a transporting agent. X-ray diffraction (XRD) pattern analysis revealed presence of mixed three-layer rhombohedral (3R) and two-layer hexagonal (2H) polytypes for the doped crystals while the undoped one shows only 2H form. Hall measurements indicate that the samples are p-type in nature. The doping effects of the materials are characterized by surface photovoltage (SPV), photoconductivity (PC) and piezoreflectance (PzR) measurements. Room temperature SPV and PC spectra reveal a feature located at ∼60 meV below the A exciton and has been tentatively assigned to be an impurity level caused by Au dopant. Excitonic transition energies of the A, B, d and C excitons detected in PzR spectra show red shift due to the presence of a small amount of Au and the broadening parameters of the excitonic transition features increase due to impurity scattering. The values of the parameters that describe the electron (exciton)-phonon interaction of excitonic transitions of A-B are about two times larger than that of d-C excitonic pairs. The possible assignments of the different origins of A-B and d-C excitonic pairs have been discussed

Sequence-specific assignment of methyl groups from the neuronal SNARE complex using lanthanide-induced pseudocontact shifts

International Nuclear Information System (INIS)

Pan, Yun-Zu; Quade, Bradley; Brewer, Kyle D.; Szabo, Monika; Swarbrick, James D.; Graham, Bim; Rizo, Josep

2016-01-01

Neurotransmitter release depends critically on the neuronal SNARE complex formed by syntaxin-1, SNAP-25 and synaptobrevin, as well as on other proteins such as Munc18-1, Munc13-1 and synaptotagmin-1. Although three-dimensional structures are available for these components, it is still unclear how they are assembled between the synaptic vesicle and plasma membranes to trigger fast, Ca 2+ -dependent membrane fusion. Methyl TROSY NMR experiments provide a powerful tool to study complexes between these proteins, but assignment of the methyl groups of the SNARE complex is hindered by its limited solubility. Here we report the assignment of the isoleucine, leucine, methionine and valine methyl groups of the four SNARE motifs of syntaxin-1, SNAP-25 and synaptobrevin within the SNARE complex based solely on measurements of lanthanide-induced pseudocontact shifts. Our results illustrate the power of this approach to assign protein resonances without the need of triple resonance experiments and provide an invaluable tool for future structural studies of how the SNARE complex binds to other components of the release machinery.

Sequence-specific assignment of methyl groups from the neuronal SNARE complex using lanthanide-induced pseudocontact shifts

Energy Technology Data Exchange (ETDEWEB)

Pan, Yun-Zu; Quade, Bradley; Brewer, Kyle D. [University of Texas Southwestern Medical Center, Department of Biophysics (United States); Szabo, Monika; Swarbrick, James D.; Graham, Bim [Monash Institute of Pharmaceutical Sciences, Monash University (Australia); Rizo, Josep, E-mail: Jose.Rizo-Rey@UTSouthwestern.edu [University of Texas Southwestern Medical Center, Department of Biophysics (United States)

2016-12-15

Neurotransmitter release depends critically on the neuronal SNARE complex formed by syntaxin-1, SNAP-25 and synaptobrevin, as well as on other proteins such as Munc18-1, Munc13-1 and synaptotagmin-1. Although three-dimensional structures are available for these components, it is still unclear how they are assembled between the synaptic vesicle and plasma membranes to trigger fast, Ca{sup 2+}-dependent membrane fusion. Methyl TROSY NMR experiments provide a powerful tool to study complexes between these proteins, but assignment of the methyl groups of the SNARE complex is hindered by its limited solubility. Here we report the assignment of the isoleucine, leucine, methionine and valine methyl groups of the four SNARE motifs of syntaxin-1, SNAP-25 and synaptobrevin within the SNARE complex based solely on measurements of lanthanide-induced pseudocontact shifts. Our results illustrate the power of this approach to assign protein resonances without the need of triple resonance experiments and provide an invaluable tool for future structural studies of how the SNARE complex binds to other components of the release machinery.

Personnel shift assignment: Existence conditions and network models

NARCIS (Netherlands)

van den Berg, Jeroen P.; van den Berg, J.P.; Panton, David M.

1994-01-01

The personnel scheduling problem is known to be a five-stage process in which the final stage involves the assignment of shifts to the days worked in the schedule. This paper discusses the existence conditions for both continuous and forward rotating shift assignments and heuristic network

75 FR 55355 - Delegation of Authority and Assignment of Responsibility

Science.gov (United States)

2010-09-10

... DEPARTMENT OF LABOR Office of the Secretary Delegation of Authority and Assignment of Responsibility Secretary's Order 4-2010 Subject: Delegation of Authority and Assignment of Responsibility to the... delegations and assignments in full force and effect, except as expressly modified herein. 4. Delegation of...

Converting Simulated Sodium-bearing Waste into a Single Solid Waste Form by Evaporation: Laboratory- and Pilot-Scale Test Results on Recycling Evaporator Overheads

Energy Technology Data Exchange (ETDEWEB)

Griffith, D.; D. L. Griffith; R. J. Kirkham; L. G. Olson; S. J. Losinski

2004-01-01

Conversion of Idaho National Engineering and Environmental Laboratory radioactive sodium-bearing waste into a single solid waste form by evaporation was demonstrated in both flask-scale and pilot-scale agitated thin film evaporator tests. A sodium-bearing waste simulant was adjusted to represent an evaporator feed in which the acid from the distillate is concentrated, neutralized, and recycled back through the evaporator. The advantage to this flowsheet is that a single remote-handled transuranic waste form is produced in the evaporator bottoms without the generation of any low-level mixed secondary waste. However, use of a recycle flowsheet in sodium-bearing waste evaporation results in a 50% increase in remote-handled transuranic volume in comparison to a non-recycle flowsheet.

7 CFR 1.325 - Form, filing and service of papers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Form, filing and service of papers. 1.325 Section 1... and service of papers. (a) Form. (1) The original and two copies of all papers in a proceeding conducted under this subpart shall be filed with the ALJ assigned to the case. (2) Every pleading and paper...

Student Perceptions of a Form-Based Approach to Reflective Journaling

Science.gov (United States)

Mabrouk, Patricia Ann

2015-01-01

The author describes the principal findings of a survey study looking at student perceptions of a new form-based approach to reflective journaling. A form-based journal assignment was developed for use in introductory lecture courses and tested over a two-year period in an Honors General Chemistry course for engineers with a total of 157…

Staff assignment practices in nursing homes: review of the literature.

Science.gov (United States)

Rahman, Anna; Straker, Jane K; Manning, Lydia

2009-01-01

Consistent assignment, whereby nursing home staff members, particularly certified nurse aides, are assigned to the same residents on most shifts, is increasingly viewed as a cornerstone of culture change in nursing homes. It has been advocated as a best-care model that increases residents' quality of life while contributing to a more stable frontline staff. Given these potential benefits, consistent assignment is now widely viewed as superior to rotating assignment, an alternative staffing model that aims to distribute care burden more fairly among staff and ensure that workers are familiar with most residents. Despite favorable anecdotal reports about the benefits of consistent assignment, the research literature reports mixed and sometimes contradictory findings for this staffing practice. This article reviews the research pertaining to staff assignment practices in nursing homes. Reviewed here are 13 reports on experimental trials (6 reports), evaluation research (4 reports), and nursing home surveys (3 reports). The review reveals broad diversity in staffing practices and raises questions that challenge popular assumptions about consistent assignment. The article closes with a discussion of the research, policy, and practice implications of the research findings.

75 FR 55354 - Delegation of Authority and Assignment of Responsibilities

Science.gov (United States)

2010-09-10

... DEPARTMENT OF LABOR Office of the Secretary Delegation of Authority and Assignment of Responsibilities Secretary's Order 3-2010 Subject: Delegation of Authority and Assignment of Responsibilities to... Secretary to enforce sections 18A and 18B of the FLSA. 4. Delegation of Authority and Assignment of...

Quality Control Test for Sequence-Phenotype Assignments

Science.gov (United States)

Ortiz, Maria Teresa Lara; Rosario, Pablo Benjamín Leon; Luna-Nevarez, Pablo; Gamez, Alba Savin; Martínez-del Campo, Ana; Del Rio, Gabriel

2015-01-01

Relating a gene mutation to a phenotype is a common task in different disciplines such as protein biochemistry. In this endeavour, it is common to find false relationships arising from mutations introduced by cells that may be depurated using a phenotypic assay; yet, such phenotypic assays may introduce additional false relationships arising from experimental errors. Here we introduce the use of high-throughput DNA sequencers and statistical analysis aimed to identify incorrect DNA sequence-phenotype assignments and observed that 10–20% of these false assignments are expected in large screenings aimed to identify critical residues for protein function. We further show that this level of incorrect DNA sequence-phenotype assignments may significantly alter our understanding about the structure-function relationship of proteins. We have made available an implementation of our method at http://bis.ifc.unam.mx/en/software/chispas. PMID:25700273

25 CFR 225.33 - Assignment of minerals agreements.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Assignment of minerals agreements. 225.33 Section 225.33 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS OIL AND GAS, GEOTHERMAL, AND SOLID MINERALS AGREEMENTS Minerals Agreements § 225.33 Assignment of minerals agreements. An...

Automating Formative and Summative Feedback for Individualised Assignments

Science.gov (United States)

Hamilton, Ian Robert

2009-01-01

Purpose: The purpose of this paper is to report on the rationale behind the use of a unique paper-based individualised accounting assignment, which automated the provision to students of immediate formative and timely summative feedback. Design/methodology/approach: As students worked towards completing their assignment, the package provided…

submission of art studio-based assignments: students experience

African Journals Online (AJOL)

PUBLICATIONS1

are reluctant to complete their studio assignments on time are critically ... tative and qualitative data, derived from survey and interviews were used to ... is therefore exploratory and studio based. It ... mogenous group of students who report pro- ... Assignment management .... The analyses in this study are based on data.

Rolling replication of UV-irradiated duplex DNA in the phi X174 replicative-form----single-strand replication system in vitro

International Nuclear Information System (INIS)

Shavitt, O.; Livneh, Z.

1989-01-01

Cloning of the phi X174 viral origin of replication into phage M13mp8 produced an M13-phi X174 chimera, the DNA of which directed efficient replicative-form----single-strand rolling replication in vitro. This replication assay was performed with purified phi X174-encoded gene A protein, Escherichia coli rep helicase, single-stranded DNA-binding protein, and DNA polymerase III holoenzyme. The nicking of replicative-form I (RFI) DNA by gene A protein was essentially unaffected by the presence of UV lesions in the DNA. However, unwinding of UV-irradiated DNA by the rep helicase was inhibited twofold as compared with unwinding of the unirradiated substrate. UV irradiation of the substrate DNA caused a strong inhibition in its ability to direct DNA synthesis. However, even DNA preparations that contained as many as 10 photodimers per molecule still supported the synthesis of progeny full-length single-stranded DNA. The appearance of full-length radiolabeled products implied at least two full rounds of replication, since the first round released the unlabeled plus viral strand of the duplex DNA. Pretreatment of the UV-irradiated DNA substrate with purified pyrimidine dimer endonuclease from Micrococcus luteus, which converted photodimer-containing supercoiled RFI DNA into relaxed, nicked RFII DNA and thus prevented its replication, reduced DNA synthesis by 70%. Analysis of radiolabeled replication products by agarose gel electrophoresis followed by autoradiography revealed that this decrease was due to a reduction in the synthesis of progeny full-length single-stranded DNA. This implies that 70 to 80% of the full-length DNA products produced in this system were synthesized on molecules that carried photodimers

Heuristic for Task-Worker Assignment with Varying Learning Slopes

Directory of Open Access Journals (Sweden)

Wipawee Tharmmaphornphilas

2010-04-01

Full Text Available Fashion industry has variety products, so the multi-skilled workers are required to improve flexibility in production and assignment. Generally the supervisor will assign task to the workers based on skill and skill levels of worker. Since in fashion industry new product styles are launched more frequently and the order size tends to be smaller, the workers always learn when the raw material and the production process changes. Consequently they require less time to produce the succeeding units of a task based on their learning ability. Since the workers have both experience and inexperience workers, so each worker has different skill level and learning ability. Consequently, the assignment which assumed constant skill level is not proper to use. This paper proposes a task-worker assignment considering worker skill levels and learning abilities. Processing time of each worker changes along production period due to a worker learning ability. We focus on a task-worker assignment in a fashion industry where tasks are ordered in series; the number of tasks is greater than the number of workers. Therefore, workers can perform multiple assignments followed the precedence restriction as an assembly line balancing problem. The problem is formulated in an integer linear programming model with objective to minimize makespan. A heuristic is proposed to determine the lower bound (LB and the upper bound (UB of the problem and the best assignment is determined. The performance of the heuristic method is tested by comparing quality of solution and computational time to optimal solutions.

Assignment Procedures in the Air Force Procurement Management Information System.

Science.gov (United States)

Ward, Joe H., Jr.; And Others

An overview is presented of the procedure for offering jobs in the Air Force Procurement Management Information System (PROMIS), an assignment system which makes possible the use of human resources research findings to improve individual personnel assignments. A general framework for viewing personnel assignment systems is presented; then job…

A property of assignment type mixed integer linear programming problems

NARCIS (Netherlands)

Benders, J.F.; van Nunen, J.A.E.E.

1982-01-01

In this paper we will proof that rather tight upper bounds can be given for the number of non-unique assignments that are achieved after solving the linear programming relaxation of some types of mixed integer linear assignment problems. Since in these cases the number of splitted assignments is

41 CFR 105-8.152 - Program accessibility: Assignment of space.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Program accessibility: Assignment of space. 105-8.152 Section 105-8.152 Public Contracts and Property Management Federal Property...-8.152 Program accessibility: Assignment of space. (a) When GSA assigns or reassigns space to an...

Scaffolding Assignments and Activities for Undergraduate Research Methods

Science.gov (United States)

Fisher, Sarah; Justwan, Florian

2018-01-01

This article details assignments and lessons created for and tested in research methods courses at two different universities, a large state school and a small liberal arts college. Each assignment or activity utilized scaffolding. Students were asked to push beyond their comfort zone while utilizing concrete and/or creative examples,…

Socially-assigned race, healthcare discrimination and preventive healthcare services.

Directory of Open Access Journals (Sweden)

Tracy Macintosh

Full Text Available Race and ethnicity, typically defined as how individuals self-identify, are complex social constructs. Self-identified racial/ethnic minorities are less likely to receive preventive care and more likely to report healthcare discrimination than self-identified non-Hispanic whites. However, beyond self-identification, these outcomes may vary depending on whether racial/ethnic minorities are perceived by others as being minority or white; this perception is referred to as socially-assigned race.To examine the associations between socially-assigned race and healthcare discrimination and receipt of selected preventive services.Cross-sectional analysis of the 2004 Behavioral Risk Factor Surveillance System "Reactions to Race" module. Respondents from seven states and the District of Columbia were categorized into 3 groups, defined by a composite of self-identified race/socially-assigned race: Minority/Minority (M/M, n = 6,837, Minority/White (M/W, n = 929, and White/White (W/W, n = 25,913. Respondents were 18 years or older, with 61.7% under age 60; 51.8% of respondents were female. Measures included reported healthcare discrimination and receipt of vaccinations and cancer screenings.Racial/ethnic minorities who reported being socially-assigned as minority (M/M were more likely to report healthcare discrimination compared with those who reported being socially-assigned as white (M/W (8.9% vs. 5.0%, p = 0.002. Those reporting being socially-assigned as white (M/W and W/W had similar rates for past-year influenza (73.1% vs. 74.3% and pneumococcal (69.3% vs. 58.6% vaccinations; however, rates were significantly lower among M/M respondents (56.2% and 47.6%, respectively, p-values<0.05. There were no significant differences between the M/M and M/W groups in the receipt of cancer screenings.Racial/ethnic minorities who reported being socially-assigned as white are more likely to receive preventive vaccinations and less likely to report

Resonance assignment of disordered protein with repetitive and overlapping sequence using combinatorial approach reveals initial structural propensities and local restrictions in the denatured state

Energy Technology Data Exchange (ETDEWEB)

Malik, Nikita; Kumar, Ashutosh, E-mail: askutoshk@iitb.ac.in [Indian Institute of Technology Bombay, Department of Bioscience and Bioengineering (India)

2016-09-15

NMR resonance assignment of intrinsically disordered proteins poses a challenge because of the limited dispersion of amide proton chemical shifts. This becomes even more complex with the increase in the size of the system. Residue specific selective labeling/unlabeling experiments have been used to resolve the overlap, but require multiple sample preparations. Here, we demonstrate an assignment strategy requiring only a single sample of uniformly labeled {sup 13}C,{sup 15}N-protein. We have used a combinatorial approach, involving 3D-HNN, CC(CO)NH and 2D-MUSIC, which allowed us to assign a denatured centromeric protein Cse4 of 229 residues. Further, we show that even the less sensitive experiments, when used in an efficient manner can lead to the complete assignment of a complex system without the use of specialized probes in a relatively short time frame. The assignment of the amino acids discloses the presence of local structural propensities even in the denatured state accompanied by restricted motion in certain regions that provides insights into the early folding events of the protein.

Resonance assignment of disordered protein with repetitive and overlapping sequence using combinatorial approach reveals initial structural propensities and local restrictions in the denatured state

International Nuclear Information System (INIS)

Malik, Nikita; Kumar, Ashutosh

2016-01-01

NMR resonance assignment of intrinsically disordered proteins poses a challenge because of the limited dispersion of amide proton chemical shifts. This becomes even more complex with the increase in the size of the system. Residue specific selective labeling/unlabeling experiments have been used to resolve the overlap, but require multiple sample preparations. Here, we demonstrate an assignment strategy requiring only a single sample of uniformly labeled "1"3C,"1"5N-protein. We have used a combinatorial approach, involving 3D-HNN, CC(CO)NH and 2D-MUSIC, which allowed us to assign a denatured centromeric protein Cse4 of 229 residues. Further, we show that even the less sensitive experiments, when used in an efficient manner can lead to the complete assignment of a complex system without the use of specialized probes in a relatively short time frame. The assignment of the amino acids discloses the presence of local structural propensities even in the denatured state accompanied by restricted motion in certain regions that provides insights into the early folding events of the protein.

Conformation of antifreeze glycoproteins as determined from conformational energy calculations and fully assigned proton NMR spectra

International Nuclear Information System (INIS)

Bush, C.A.; Rao, B.N.N.

1986-01-01

The 1 H NMR spectra of AFGP's ranging in molecular weight from 2600 to 30,000 Daltons isolated from several different species of polar fish have been measured. The spectrum of AFGP 1-4 from Pagothenia borchgrevinki with an average of 30 repeating subunits has a single resonance for each proton of the glycotripeptide repeating unit, (ala-[gal-(β-1→3) galNAc-(α--O-]thr-ala)/sub n/. Its 1 H NMR spectrum including resonances of the amide protons has been completely assigned. Coupling constants and nuclear Overhauser enhancements (n.O.e.) between protons on distant residues imply conformational order. The 2600 dalton molecular weight glycopeptides (AFGP-8) have pro in place of ala at certain specific points in the sequence and AFGP-8R of Eleginus gracilis has arg in place of one thr. The resonances of pro and arg were assigned by decoupling. The resonances of the carboxy and amino terminals have distinct chemical shifts and were assigned in AFGP-8 of Boreogadus saida by titration. n.O.e. between α--protons and amide protons of the adjacent residue (sequential n.O.e.) were used in assignments of additional resonances and to assign the distinctive resonances of thr followed by pro. Conformational energy calculations on the repeating glycotripeptide subunit of AFGP show that the α--glucosidic linkage has a fixed conformation while the β--linkage is less rigid. A conformational model for AFGP 1-4, which is based on the calculations has the peptide in an extended left-handed helix with three residues per turn similar to polyproline II. The model is consistent with CD data, amide proton coupling constants, temperature dependence of amide proton chemical shifts

75 FR 54217 - Reports, Forms, and Recordkeeping Requirements

Science.gov (United States)

2010-09-03

..., NHTSA will conduct two types of qualitative research. One research project will consist of two (2) focus... Information Regulations (sections 103 and 105) Qualitative Research. OMB Control Number: Not Assigned. Form... the following methods: Federal eRulemaking Portal: Go to http://www.regulations.gov . Follow the...

An absorptive single-pole four-throw switch using multiple-contact MEMS switches and its application to a monolithic millimeter-wave beam-forming network

International Nuclear Information System (INIS)

Lee, Sanghyo; Kim, Jong-Man; Kim, Yong-Kweon; Kwon, Youngwoo

2009-01-01

In this paper, a new absorptive single-pole four-throw (SP4T) switch based on multiple-contact switching is proposed and integrated with a Butler matrix to demonstrate a monolithic beam-forming network at millimeter waves (mm waves). In order to simplify the switching driving circuit and reduce the number of unit switches in an absorptive SP4T switch, the individual switches were replaced with long-span multiple-contact switches using stress-free single-crystalline-silicon MEMS technology. This approach improves the mechanical stability as well as the manufacturing yield, thereby allowing successful integration into a monolithic beam former. The fabricated absorptive SP4T MEMS switch shows insertion loss less than 1.3 dB, return losses better than 11 dB at 30 GHz and wideband isolation performance higher than 39 dB from 20 to 40 GHz. The absorptive SP4T MEMS switch is integrated with a 4 × 4 Butler matrix on a single chip to implement a monolithic beam-forming network, directing beam into four distinct angles. Array factors from the measured data show that the proposed absorptive SPnT MEMS switch can be effectively used for high-performance mm-wave beam-switching systems. This work corresponds to the first demonstration of a monolithic beam-forming network using switched beams

The Presentation Assignment: Creating Learning Opportunities for Diverse Student Populations.

Science.gov (United States)

Spencer, Brenda H.; Bartle-Angus, Kathryn

2000-01-01

Finds the presentation assignment to be an effective method of providing students with the opportunity to apply the literacy skills they are learning in ways that are personally meaningful. Describes the presentation assignment framework and provides an example of an assignment that required students to analyze and interpret works of literature…

Triage level assignment and nurse characteristics and experience.

Science.gov (United States)

Gómez-Angelats, Elisenda; Miró, Òscar; Bragulat Baur, Ernesto; Antolín Santaliestra, Alberto; Sánchez Sánchez, Miquel

2018-06-01

To study the relation between nursing staff demographics and experience and their assignment of triage level in the emergency department. One-year retrospective observational study in the triage area of a tertiary care urban university hospital that applies the Andorran-Spanish triage model. Variables studied were age, gender, nursing experience, triage experience, shift, usual level of emergency work the nurse undertakes, number of triage decisions made, and percentage of patients assigned to each level. Fifty nurses (5 men, 45 women) with a mean (SD) age of 45 (9) years triaged 67 803 patients during the year. Nurses classified more patients in level 5 on the morning shift (7.9%) than on the afternoon shift (5.5%) (P=.003). The difference in the rate of level-5 triage classification became significant when nurses were older (β = 0.092, P=.037) and experience was greater (β = 0.103, P=.017). The number of triages recorded by a nurse was significantly and directly related to the percentage of patients assigned to level 3 (β = 0.003, P=.006) and inversely related to the percentages assigned to level 4 (β = -0.002, P=.008) and level 5 (β = -0.001, P=.017). We found that triage level assignments were related to age, experience, shift, and total number of patients triaged by a nurse.

Visual words assignment via information-theoretic manifold embedding.

Science.gov (United States)

Deng, Yue; Li, Yipeng; Qian, Yanjun; Ji, Xiangyang; Dai, Qionghai

2014-10-01

Codebook-based learning provides a flexible way to extract the contents of an image in a data-driven manner for visual recognition. One central task in such frameworks is codeword assignment, which allocates local image descriptors to the most similar codewords in the dictionary to generate histogram for categorization. Nevertheless, existing assignment approaches, e.g., nearest neighbors strategy (hard assignment) and Gaussian similarity (soft assignment), suffer from two problems: 1) too strong Euclidean assumption and 2) neglecting the label information of the local descriptors. To address the aforementioned two challenges, we propose a graph assignment method with maximal mutual information (GAMI) regularization. GAMI takes the power of manifold structure to better reveal the relationship of massive number of local features by nonlinear graph metric. Meanwhile, the mutual information of descriptor-label pairs is ultimately optimized in the embedding space for the sake of enhancing the discriminant property of the selected codewords. According to such objective, two optimization models, i.e., inexact-GAMI and exact-GAMI, are respectively proposed in this paper. The inexact model can be efficiently solved with a closed-from solution. The stricter exact-GAMI nonparametrically estimates the entropy of descriptor-label pairs in the embedding space and thus leads to a relatively complicated but still trackable optimization. The effectiveness of GAMI models are verified on both the public and our own datasets.

Contact replacement for NMR resonance assignment.

Science.gov (United States)

Xiong, Fei; Pandurangan, Gopal; Bailey-Kellogg, Chris

2008-07-01

Complementing its traditional role in structural studies of proteins, nuclear magnetic resonance (NMR) spectroscopy is playing an increasingly important role in functional studies. NMR dynamics experiments characterize motions involved in target recognition, ligand binding, etc., while NMR chemical shift perturbation experiments identify and localize protein-protein and protein-ligand interactions. The key bottleneck in these studies is to determine the backbone resonance assignment, which allows spectral peaks to be mapped to specific atoms. This article develops a novel approach to address that bottleneck, exploiting an available X-ray structure or homology model to assign the entire backbone from a set of relatively fast and cheap NMR experiments. We formulate contact replacement for resonance assignment as the problem of computing correspondences between a contact graph representing the structure and an NMR graph representing the data; the NMR graph is a significantly corrupted, ambiguous version of the contact graph. We first show that by combining connectivity and amino acid type information, and exploiting the random structure of the noise, one can provably determine unique correspondences in polynomial time with high probability, even in the presence of significant noise (a constant number of noisy edges per vertex). We then detail an efficient randomized algorithm and show that, over a variety of experimental and synthetic datasets, it is robust to typical levels of structural variation (1-2 AA), noise (250-600%) and missings (10-40%). Our algorithm achieves very good overall assignment accuracy, above 80% in alpha-helices, 70% in beta-sheets and 60% in loop regions. Our contact replacement algorithm is implemented in platform-independent Python code. The software can be freely obtained for academic use by request from the authors.

28 CFR 545.23 - Inmate work/program assignment.

Science.gov (United States)

2010-07-01

... community living area, unless the pretrial inmate has signed a waiver of his or her right not to work (see... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Inmate work/program assignment. 545.23... WORK AND COMPENSATION Inmate Work and Performance Pay Program § 545.23 Inmate work/program assignment...

Optimal assignment of incoming flights to baggage carousels at airports

DEFF Research Database (Denmark)

Barth, Torben C.

The problem considered in this report is an assignment problem occurring at airports. This problem concerns the assignment of baggage carousels in baggage claim halls to arriving aircraft (baggage carousel assignment problem). This is a highly dynamic problem since disruptions frequently occur du...... and in general is a substantial support in decision making....

PARETO OPTIMAL SOLUTIONS FOR MULTI-OBJECTIVE GENERALIZED ASSIGNMENT PROBLEM

Directory of Open Access Journals (Sweden)

S. Prakash

2012-01-01

Full Text Available

ENGLISH ABSTRACT: The Multi-Objective Generalized Assignment Problem (MGAP with two objectives, where one objective is linear and the other one is non-linear, has been considered, with the constraints that a job is assigned to only one worker – though he may be assigned more than one job, depending upon the time available to him. An algorithm is proposed to find the set of Pareto optimal solutions of the problem, determining assignments of jobs to workers with two objectives without setting priorities for them. The two objectives are to minimise the total cost of the assignment and to reduce the time taken to complete all the jobs.

AFRIKAANSE OPSOMMING: ‘n Multi-doelwit veralgemeende toekenningsprobleem (“multi-objective generalised assignment problem – MGAP” met twee doelwitte, waar die een lineêr en die ander nielineêr is nie, word bestudeer, met die randvoorwaarde dat ‘n taak slegs toegedeel word aan een werker – alhoewel meer as een taak aan hom toegedeel kan word sou die tyd beskikbaar wees. ‘n Algoritme word voorgestel om die stel Pareto-optimale oplossings te vind wat die taaktoedelings aan werkers onderhewig aan die twee doelwitte doen sonder dat prioriteite toegeken word. Die twee doelwitte is om die totale koste van die opdrag te minimiseer en om die tyd te verminder om al die take te voltooi.

Rapid Prototyping by Single Point Incremental Forming of Sheet Metal

DEFF Research Database (Denmark)

Skjødt, Martin

2008-01-01

. The process is incremental forming since plastic deformation takes place in a small local zone underneath the forming tool, i.e. the sheet is formed as a summation of the movement of the local plastic zone. The process is slow and therefore only suited for prototypes or small batch production. On the other...... in the plastic zone. Using these it is demonstrated that the growth rate of accumulated damage in SPIF is small compared to conventional sheet forming processes. This combined with an explanation why necking is suppressed is a new theory stating that SPIF is limited by fracture and not necking. The theory...... SPIF. A multi stage strategy is presented which allows forming of a cup with vertical sides in about half of the depth. It is demonstrated that this results in strain paths which are far from straight, but strains are still limited by a straight fracture line in the principal strain space. The multi...

Fast and accurate taxonomic assignments of metagenomic sequences using MetaBin.

Directory of Open Access Journals (Sweden)

Vineet K Sharma

Full Text Available Taxonomic assignment of sequence reads is a challenging task in metagenomic data analysis, for which the present methods mainly use either composition- or homology-based approaches. Though the homology-based methods are more sensitive and accurate, they suffer primarily due to the time needed to generate the Blast alignments. We developed the MetaBin program and web server for better homology-based taxonomic assignments using an ORF-based approach. By implementing Blat as the faster alignment method in place of Blastx, the analysis time has been reduced by severalfold. It is benchmarked using both simulated and real metagenomic datasets, and can be used for both single and paired-end sequence reads of varying lengths (≥45 bp. To our knowledge, MetaBin is the only available program that can be used for the taxonomic binning of short reads (<100 bp with high accuracy and high sensitivity using a homology-based approach. The MetaBin web server can be used to carry out the taxonomic analysis, by either submitting reads or Blastx output. It provides several options including construction of taxonomic trees, creation of a composition chart, functional analysis using COGs, and comparative analysis of multiple metagenomic datasets. MetaBin web server and a standalone version for high-throughput analysis are available freely at http://metabin.riken.jp/.

Evaluation and review of alternative waste forms for immobilization of high level radioactive wastes

International Nuclear Information System (INIS)

1979-01-01

Objective was to review the relative merits and potential of eleven alternative waste forms being considered for the solidification and disposal of radioactive wastes. A numerical rating of the alternative waste forms was arrived at individually by peer review panel members taking into consideration nine scientific and nine engineering parameters affecting the long-term performance and production of waste forms. A group rating for the alternative forms was achieved by averaging the individiual scores and discussing the available data base. Three final ranking lists comparing: (A) Present Scientific Merits or Least Risk for Use Today; (B) Research Priority; and (3) Present and Potential Engineering Practicality were prepared by the Panel. Each waste form in the lists is assigned a value of either (1) Top Rank, (2) Intermediate Rank, or is assigned a value of either (1) Top Rank, (2) Intermediate Rank, or (3) Bottom Rank. Relative strengths and weaknesses of the alternative waste forms and recommendations for future program directions are discussed

Game theory and traffic assignment.

Science.gov (United States)

2013-09-01

Traffic assignment is used to determine the number of users on roadway links in a network. While this problem has : been widely studied in transportation literature, its use of the concept of equilibrium has attracted considerable interest : in the f...

Interface Assignment-Based AODV Routing Protocol to Improve Reliability in Multi-Interface Multichannel Wireless Mesh Networks

Directory of Open Access Journals (Sweden)

Won-Suk Kim

2015-01-01

Full Text Available The utilization of wireless mesh networks (WMNs has greatly increased, and the multi-interface multichannel (MIMC technic has been widely used for the backbone network. Unfortunately, the ad hoc on-demand distance vector (AODV routing protocol defined in the IEEE 802.11s standard was designed for WMNs using the single-interface single-channel technic. So, we define a problem that happens when the legacy AODV is used in MIMC WMNs and propose an interface assignment-based AODV (IA-AODV in order to resolve that problem. IA-AODV, which is based on multitarget path request, consists of the PREQ prediction scheme, the PREQ loss recovery scheme, and the PREQ sender assignment scheme. A detailed operation according to various network conditions and services is introduced, and the routing efficiency and network reliability of a network using IA-AODV are analyzed over the presented system model. Finally, after a real-world test-bed for MIMC WMNs using the IA-AODV routing protocol is implemented, the various indicators of the network are evaluated through experiments. When the proposed routing protocol is compared with the existing AODV routing protocol, it performs the path update using only 14.33% of the management frames, completely removes the routing malfunction, and reduces the UDP packet loss ratio by 0.0012%.

Simulated annealing algorithm for solving chambering student-case assignment problem

Science.gov (United States)

Ghazali, Saadiah; Abdul-Rahman, Syariza

2015-12-01

The problem related to project assignment problem is one of popular practical problem that appear nowadays. The challenge of solving the problem raise whenever the complexity related to preferences, the existence of real-world constraints and problem size increased. This study focuses on solving a chambering student-case assignment problem by using a simulated annealing algorithm where this problem is classified under project assignment problem. The project assignment problem is considered as hard combinatorial optimization problem and solving it using a metaheuristic approach is an advantage because it could return a good solution in a reasonable time. The problem of assigning chambering students to cases has never been addressed in the literature before. For the proposed problem, it is essential for law graduates to peruse in chambers before they are qualified to become legal counselor. Thus, assigning the chambering students to cases is a critically needed especially when involving many preferences. Hence, this study presents a preliminary study of the proposed project assignment problem. The objective of the study is to minimize the total completion time for all students in solving the given cases. This study employed a minimum cost greedy heuristic in order to construct a feasible initial solution. The search then is preceded with a simulated annealing algorithm for further improvement of solution quality. The analysis of the obtained result has shown that the proposed simulated annealing algorithm has greatly improved the solution constructed by the minimum cost greedy heuristic. Hence, this research has demonstrated the advantages of solving project assignment problem by using metaheuristic techniques.

5D {sup 13}C-detected experiments for backbone assignment of unstructured proteins with a very low signal dispersion

Energy Technology Data Exchange (ETDEWEB)

Novacek, Jiri [Masaryk University, Faculty of Science, NCBR, and CEITEC (Czech Republic); Zawadzka-Kazimierczuk, Anna [University of Warsaw, Faculty of Chemistry (Poland); Papouskova, Veronika; Zidek, Lukas, E-mail: lzidek@chemi.muni.cz [Masaryk University, Faculty of Science, NCBR, and CEITEC (Czech Republic); Sanderova, Hana; Krasny, Libor [Institute of Microbiology, Academy of Sciences of the Czech Republic, Laboratory of Molecular Genetics of Bacteria and Department of Bacteriology (Czech Republic); Kozminski, Wiktor [University of Warsaw, Faculty of Chemistry (Poland); Sklenar, Vladimir [Masaryk University, Faculty of Science, NCBR, and CEITEC (Czech Republic)

2011-05-15

Two novel 5D NMR experiments (CACONCACO, NCOCANCO) for backbone assignment of disordered proteins are presented. The pulse sequences exploit relaxation properties of the unstructured proteins and combine the advantages of {sup 13}C-direct detection, non-uniform sampling, and longitudinal relaxation optimization to maximize the achievable resolution and minimize the experimental time. The pulse sequences were successfully tested on the sample of partially disordered delta subunit from RNA polymerase from Bacillus subtilis. The unstructured part of this 20 kDa protein consists of 81 amino acids with frequent sequential repeats. A collection of 0.0003% of the data needed for a conventional experiment with linear sampling was sufficient to perform an unambiguous assignment of the disordered part of the protein from a single 5D spectrum.

Efficient Mechanisms to Allocate Assignment Incentives in the Navy

National Research Council Canada - National Science Library

Nimon, R. W; Hall, Ricky D; Zaki, Hossam

2005-01-01

.... All assignments, however, may not necessarily be voluntary. These assignments (jobs) have been labeled as "hard to fill" by Navy leadership, and the Navy has implemented market-based, cash stipends to attract Sailors to these jobs...

Ant Colony Algorithm and Simulation for Robust Airport Gate Assignment

Directory of Open Access Journals (Sweden)

Hui Zhao

2014-01-01

Full Text Available Airport gate assignment is core task for airport ground operations. Due to the fact that the departure and arrival time of flights may be influenced by many random factors, the airport gate assignment scheme may encounter gate conflict and many other problems. This paper aims at finding a robust solution for airport gate assignment problem. A mixed integer model is proposed to formulate the problem, and colony algorithm is designed to solve this model. Simulation result shows that, in consideration of robustness, the ability of antidisturbance for airport gate assignment scheme has much improved.

MEB 2013, Regulation for Administrator Assignment and Relocation Based On the Opinions of Administrators

Directory of Open Access Journals (Sweden)

Soner DOĞAN

2014-04-01

Full Text Available In this study; it is aimed to determine the opinions of the institution managers concerning the Regulation for Administrator Assignment and Relocation dated February 28, 2013, the scoring criteria in the regulation and the disturbances experienced in the application process of the regulation. The study is carried out in accordance with the phenomenological pattern through qualitative research methods. The participants were determined with the criterion sampling method which is one of the purposeful sampling methods. The study group of the research is composed of the eight managers serving in a province. In the study, a semi-structured interview form was used as data collection tool. In the interpretation process of the interviews, the inductive descriptive analysis, the content analysis and the constant comparison technique were used. Three main themes have come out regarding the result of the data analysis process of assigning the administrators, the combining of the different types of institutions and the application of the forced relocation.

De novo clustering methods outperform reference-based methods for assigning 16S rRNA gene sequences to operational taxonomic units

Directory of Open Access Journals (Sweden)

Sarah L. Westcott

2015-12-01

Full Text Available Background. 16S rRNA gene sequences are routinely assigned to operational taxonomic units (OTUs that are then used to analyze complex microbial communities. A number of methods have been employed to carry out the assignment of 16S rRNA gene sequences to OTUs leading to confusion over which method is optimal. A recent study suggested that a clustering method should be selected based on its ability to generate stable OTU assignments that do not change as additional sequences are added to the dataset. In contrast, we contend that the quality of the OTU assignments, the ability of the method to properly represent the distances between the sequences, is more important.Methods. Our analysis implemented six de novo clustering algorithms including the single linkage, complete linkage, average linkage, abundance-based greedy clustering, distance-based greedy clustering, and Swarm and the open and closed-reference methods. Using two previously published datasets we used the Matthew’s Correlation Coefficient (MCC to assess the stability and quality of OTU assignments.Results. The stability of OTU assignments did not reflect the quality of the assignments. Depending on the dataset being analyzed, the average linkage and the distance and abundance-based greedy clustering methods generated OTUs that were more likely to represent the actual distances between sequences than the open and closed-reference methods. We also demonstrated that for the greedy algorithms VSEARCH produced assignments that were comparable to those produced by USEARCH making VSEARCH a viable free and open source alternative to USEARCH. Further interrogation of the reference-based methods indicated that when USEARCH or VSEARCH were used to identify the closest reference, the OTU assignments were sensitive to the order of the reference sequences because the reference sequences can be identical over the region being considered. More troubling was the observation that while both USEARCH and

An assigned responsibility system for robotic teleoperation control.

Science.gov (United States)

Small, Nicolas; Lee, Kevin; Mann, Graham

2018-01-01

This paper proposes an architecture that explores a gap in the spectrum of existing strategies for robot control mode switching in adjustable autonomy. In situations where the environment is reasonably known and/or predictable, pre-planning these control changes could relieve robot operators of the additional task of deciding when and how to switch. Such a strategy provides a clear division of labour between the automation and the human operator(s) before the job even begins, allowing for individual responsibilities to be known ahead of time, limiting confusion and allowing rest breaks to be planned. Assigned Responsibility is a new form of adjustable autonomy-based teleoperation that allows the selective inclusion of automated control elements at key stages of a robot operation plan's execution. Progression through these stages is controlled by automatic goal accomplishment tracking. An implementation is evaluated through engineering tests and a usability study, demonstrating the viability of this approach and offering insight into its potential applications.

Database proton NMR chemical shifts for RNA signal assignment and validation

Energy Technology Data Exchange (ETDEWEB)

Barton, Shawn; Heng Xiao [University of Maryland, Baltimore County, Howard Hughes Medical Institute (United States); Johnson, Bruce A., E-mail: bruce@onemoonscientific.com [University of Maryland, Baltimore County, Department of Chemistry and Biochemistry (United States); Summers, Michael F., E-mail: summers@hhmi.umbc.edu [University of Maryland, Baltimore County, Howard Hughes Medical Institute (United States)

2013-01-15

The Biological Magnetic Resonance Data Bank contains NMR chemical shift depositions for 132 RNAs and RNA-containing complexes. We have analyzed the {sup 1}H NMR chemical shifts reported for non-exchangeable protons of residues that reside within A-form helical regions of these RNAs. The analysis focused on the central base pair within a stretch of three adjacent base pairs (BP triplets), and included both Watson-Crick (WC; G:C, A:U) and G:U wobble pairs. Chemical shift values were included for all 4{sup 3} possible WC-BP triplets, as well as 137 additional triplets that contain one or more G:U wobbles. Sequence-dependent chemical shift correlations were identified, including correlations involving terminating base pairs within the triplets and canonical and non-canonical structures adjacent to the BP triplets (i.e. bulges, loops, WC and non-WC BPs), despite the fact that the NMR data were obtained under different conditions of pH, buffer, ionic strength, and temperature. A computer program (RNAShifts) was developed that enables convenient comparison of RNA {sup 1}H NMR assignments with database predictions, which should facilitate future signal assignment/validation efforts and enable rapid identification of non-canonical RNA structures and RNA-ligand/protein interaction sites.

FindFoci: a focus detection algorithm with automated parameter training that closely matches human assignments, reduces human inconsistencies and increases speed of analysis.

Directory of Open Access Journals (Sweden)

Alex D Herbert

Full Text Available Accurate and reproducible quantification of the accumulation of proteins into foci in cells is essential for data interpretation and for biological inferences. To improve reproducibility, much emphasis has been placed on the preparation of samples, but less attention has been given to reporting and standardizing the quantification of foci. The current standard to quantitate foci in open-source software is to manually determine a range of parameters based on the outcome of one or a few representative images and then apply the parameter combination to the analysis of a larger dataset. Here, we demonstrate the power and utility of using machine learning to train a new algorithm (FindFoci to determine optimal parameters. FindFoci closely matches human assignments and allows rapid automated exploration of parameter space. Thus, individuals can train the algorithm to mirror their own assignments and then automate focus counting using the same parameters across a large number of images. Using the training algorithm to match human assignments of foci, we demonstrate that applying an optimal parameter combination from a single image is not broadly applicable to analysis of other images scored by the same experimenter or by other experimenters. Our analysis thus reveals wide variation in human assignment of foci and their quantification. To overcome this, we developed training on multiple images, which reduces the inconsistency of using a single or a few images to set parameters for focus detection. FindFoci is provided as an open-source plugin for ImageJ.

Assigning agents to a line

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Moreno-Ternero, Juan D.; Østerdal, Lars Peter Raahave

2014-01-01

minimizing modification of the classic random priority method to solve this class of problems. We also provide some logical relations in our setting among standard axioms in the literature on assignment problems, and explore the robustness of our results to several extensions of our setting....

Research on bulk-cargo-port berth assignment based on priority of resource allocation

Directory of Open Access Journals (Sweden)

Chunfang Guo

2013-03-01

Full Text Available Purpose: The purpose of this paper is to propose a Priority of Resource Allocation model about how to utilize the resources of the port efficiently, through the improvement of traditional ant colony algorithm, the ship-berth matching relation constraint matrix formed by ontology reasoning. Design/methodology/approach: Through questionnaires?Explore factor analysis (EFA and principal component analysis, the authors extract the importance of the goods, the importance of customers, and type of trade as the main factors of the ship operating priority. Then the authors combine berth assignment problem with the improved ant colony algorithm, and use the model to improve ship scheduling quality. Finally, the authors verify the model with physical data in a bulk-cargo-port in China. Findings: Test by the real data of bulk cargo port, it show that ships’ resource using priority and the length of waiting time are consistent; it indicates that the priority of resource allocation play a prominent role in improving ship scheduling quality. Research limitations: The questionnaires is limited in only one port group, more  related Influence factors should be considered to extend the conclusion. Practical implications: The Priority of Resource Allocation model in this paper can be used to improve the efficiency of the dynamic berth assignment. Originality: This paper makes the time of ship in port minimized as the optimization of key indicators and establishes a dynamic berth assignment model based on improved ant colony algorithm and the ontology reasoning model.

A Hybrid Model for Making Online Assignments Effective In a Traditional Classroom

Directory of Open Access Journals (Sweden)

Ronda Sturgill

2011-04-01

Full Text Available Today’s college student has grown up in a world filled with technology and many current college students routinely utilize the latest and most up to date forms of technology. The result is an ever-changing way of communicating between faculty members and students. Many faculty members, however, are intimidated by the use of the terms “technology”, “online” and “distance education.” This often results in a communication gap between faculty and students where faculty members will “lose” students on the first day of class. Advantages of incorporating online tools into the course structure include freeing up additional class time, enhancing classroom discussions, and allowing students to remain current with information in their field. This hybrid instructional model focuses on the integration of technology tools as a supplement to traditional classroom teaching. This paper will describe how to effectively incorporate and implement technology using online course tools in a traditional classroom setting. Specific examples of online assignments, discussions, and assessments from an allied health education program and class will be discussed. Lessons learned and challenges confronted when adapting to the utilization of specific online course assignments and tools will be discussed.

Random Assignment of Schools to Groups in the Drug Resistance Strategies Rural Project: Some New Methodological Twists

Science.gov (United States)

Pettigrew, Jonathan; Miller-Day, Michelle; Krieger, Janice L.; Zhou, Jiangxiu; Hecht, Michael L.

2014-01-01

Random assignment to groups is the foundation for scientifically rigorous clinical trials. But assignment is challenging in group randomized trials when only a few units (schools) are assigned to each condition. In the DRSR project, we assigned 39 rural Pennsylvania and Ohio schools to three conditions (rural, classic, control). But even with 13 schools per condition, achieving pretest equivalence on important variables is not guaranteed. We collected data on six important school-level variables: rurality, number of grades in the school, enrollment per grade, percent white, percent receiving free/assisted lunch, and test scores. Key to our procedure was the inclusion of school-level drug use data, available for a subset of the schools. Also, key was that we handled the partial data with modern missing data techniques. We chose to create one composite stratifying variable based on the seven school-level variables available. Principal components analysis with the seven variables yielded two factors, which were averaged to form the composite inflate-suppress (CIS) score which was the basis of stratification. The CIS score was broken into three strata within each state; schools were assigned at random to the three program conditions from within each stratum, within each state. Results showed that program group membership was unrelated to the CIS score, the two factors making up the CIS score, and the seven items making up the factors. Program group membership was not significantly related to pretest measures of drug use (alcohol, cigarettes, marijuana, chewing tobacco; smallest p>.15), thus verifying that pretest equivalence was achieved. PMID:23722619

Experience of usage of forming rings and protective caps made of PTFE on the single-component implants

Directory of Open Access Journals (Sweden)

S. A. Chertov

2014-04-01

Full Text Available Relevance. The main reason that limits the usage of single-component implants, as compared with collapsible (two-component implants is the high risk of infectious and inflammatory complications in the postoperative period and problems in prosthetics in the esthetically important areas. Therefore, the usage of elements that contribute to healing of the mucous membrane in the early stages of implantation is particularly up-to-date. Work objective is to determine the clinical effectiveness of usage of forming rings and protective caps made of PTFE on the single-component implants in the prevention of peri-implant pathology on a one-step surgical implantation. Materials and methods of the investigation. For this work we used the treatment results of 24 patients with various dentition defects. According to the single-component implant procedure 52 single-component implants were mounted. The head of monolithic implants (38 p. were isolated by rings or caps made of PTFE. For comparison, 14 implants remained bare for 2-6 weeks before the temporary prosthesis. Postoperatively, subjective feelings were noted in patients, the presence or absence of pain complaints during the examination and palpation, the nature and extent of edema, the phenomena of inflammation around the implant neck were checked. At the stage of sutures removal the degree of soft plaque deposits on the healing elements and titanium implant heads was assessed. Results of the investigation and their discussion. No effects of mucosal hyperemia around the supporting elements made of PTFE were revealed, there was no soft and hard plaque on the rings and caps in most patients of the main group. In patients of the control group, on the contrary, the appearance of the biofilm that covered the head and the implant shoulder on all abutments, which were not protected by a ring or cap, was noted. The healing period of mucous membrane in patients of the control group was longer, the quality of

Single-order-parameter description of glass-forming liquids

DEFF Research Database (Denmark)

Ellegaard, Niels Langager; Christensen, Tage Emil; Christiansen, Peder Voetmann

2007-01-01

Thermoviscoelastic linear-response functions are calculated from the master equation describing viscous liquid inherent dynamics. From the imaginary parts of the frequency-dependent isobaric specific heat, isothermal compressibility, and isobaric thermal expansion coefficient, we define a "linear...... dynamic Prigogine-Defay ratio" with the property that if this ratio is unity at one frequency, then it is unity at all frequencies. This happens if and only if there is a single-order-parameter description of the thermoviscoelastic linear responses via an order parameter which may be nonexponential...

Form 6 - gas balancing agreement

International Nuclear Information System (INIS)

Anon.

1990-01-01

In 1988, a special Committee of the Rocky Mountain Mineral Law Foundation undertook a project to draft a model from gas balancing agreement. This project was initiated at the request of a number of Foundation members who felt that a model form gas balancing agreement would facilitate the negotiation of operating agreement, since gas balancing issues had become sticking points in the process. The Committee was composed of attorneys representing a wide cross-section of the oil and gas industry including both major and independent oil companies, production companies with interstate pipeline affiliates, and private practitioners. The Committee attempted to address the more controversial issues in gas balancing with optional provisions in the Form. To facilitate the negotiation process, the number of optional provisions was minimized. This form may be used as an Appendix to the new A.A.P.L. Form 610-1989 Model Form Operating Agreement. This book includes provision of this Form which are: Ownership of gas production; Balancing of production accounts; Cash balancing upon depletion; Deliverability tests; Nominations; Statements; Payment of taxes; Operating expenses; Overproducing allowable; Payment of leasehold burdens; Operator's liability; Successors and assigns; Audits; Arbitration; and Operator's fees

Covariance NMR Processing and Analysis for Protein Assignment.

Science.gov (United States)

Harden, Bradley J; Frueh, Dominique P

2018-01-01

During NMR resonance assignment it is often necessary to relate nuclei to one another indirectly, through their common correlations to other nuclei. Covariance NMR has emerged as a powerful technique to correlate such nuclei without relying on error-prone peak peaking. However, false-positive artifacts in covariance spectra have impeded a general application to proteins. We recently introduced pre- and postprocessing steps to reduce the prevalence of artifacts in covariance spectra, allowing for the calculation of a variety of 4D covariance maps obtained from diverse combinations of pairs of 3D spectra, and we have employed them to assign backbone and sidechain resonances in two large and challenging proteins. In this chapter, we present a detailed protocol describing how to (1) properly prepare existing 3D spectra for covariance, (2) understand and apply our processing script, and (3) navigate and interpret the resulting 4D spectra. We also provide solutions to a number of errors that may occur when using our script, and we offer practical advice when assigning difficult signals. We believe such 4D spectra, and covariance NMR in general, can play an integral role in the assignment of NMR signals.

Genetics of traffic assignment models for strategic transport planning

NARCIS (Netherlands)

Bliemer, M.C.J.; Raadsen, M.P.H.; Brederode, L.J.N.; Bell, M.G.H.; Wismans, Luc Johannes Josephus; Smith, M.J.

2016-01-01

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic

Designing Internet research assignments: building a framework for instructor collaboration

Directory of Open Access Journals (Sweden)

David Ward

2000-01-01

Full Text Available Internet knowledge is increasing steadily among instructors in the academic world. As courses incorporate more instructional technology, traditional undergraduate research assignments are adapting to reflect the changing world of information and information access. New library assignments reflect this shift as well, with term papers and research projects asking students to use Web sites as an information resource, in addition to the standard literature of periodicals and monographs. But the many pitfalls the library profession has learned in its own metamorphosis during the past decade are often repeated in these newer course assignments. The authors in this paper present a framework for librarians to interact with instructors to incorporate Internet resources into traditional term paper and research assignments. They suggest a framework for creating sample assignments librarians can take to campus instructional units, to show the teaching community at large what the library profession has learned from first-hand experience.

Sexism in Language: Do Fiction Writers Assign Agentive and Patient Roles Equally to Male and Female Characters?

Directory of Open Access Journals (Sweden)

Dunlop Ochieng

2012-10-01

Full Text Available Problem Statement: Studies have shown that language is used discriminatorily to women and men. Hence, there have been movements against gender biased language−the movements which are reported so successful especially in the West.Purpose of Study: This paper however argues that discrimination stems from speakers’ minds; and hence performing gender neutral language alone does not confirm gender neutrality of the performer. The reliable way of judging gender neutrality would then be studying the speakers’ minds.Method: The study applied psychoanalytic literary criticism as a gateway to the unconscious minds of American authors–to find out how gender neutral they were at cognitive level. Through psychoanalytic literary criticism, authors’ suppressed desires would find their way out onto their works in a distorted form. Along these lines, the study assessed the equality in assigning agentive and patient semantic roles between males and females in American fictions–to find out who between males and females were frequently assigned agentive and patient roles of the reciprocal verbs: kiss, hug, marry, and divorce.Findings: The study found out that males were assigned more agentive roles in kiss and hug, and females in divorce. Moreover, both were assigned almost equal roles in marry.Conclusion: The implication of the findings is that speakers’ unconscious mind is basically gender biased along gender stereotypes.

Postgraduate diploma collaborative assignment: Implications for ...

African Journals Online (AJOL)

Postgraduate diploma collaborative assignment: Implications for ESL students ... and collaborative teaching/learning model involving the major course convenors. ... The quality of the work and mood of all concerned improved tremendously.

Automated backbone assignment of labeled proteins using the threshold accepting algorithm

International Nuclear Information System (INIS)

Leutner, Michael; Gschwind, Ruth M.; Liermann, Jens; Schwarz, Christian; Gemmecker, Gerd; Kessler, Horst

1998-01-01

The sequential assignment of backbone resonances is the first step in the structure determination of proteins by heteronuclear NMR. For larger proteins, an assignment strategy based on proton side-chain information is no longer suitable for the use in an automated procedure. Our program PASTA (Protein ASsignment by Threshold Accepting) is therefore designed to partially or fully automate the sequential assignment of proteins, based on the analysis of NMR backbone resonances plus C β information. In order to overcome the problems caused by peak overlap and missing signals in an automated assignment process, PASTA uses threshold accepting, a combinatorial optimization strategy, which is superior to simulated annealing due to generally faster convergence and better solutions. The reliability of this algorithm is shown by reproducing the complete sequential backbone assignment of several proteins from published NMR data. The robustness of the algorithm against misassigned signals, noise, spectral overlap and missing peaks is shown by repeating the assignment with reduced sequential information and increased chemical shift tolerances. The performance of the program on real data is finally demonstrated with automatically picked peak lists of human nonpancreatic synovial phospholipase A 2 , a protein with 124 residues

Assigning spectra of chaotic molecules with diabatic correlation diagrams

International Nuclear Information System (INIS)

Rose, J.P.; Kellman, M.E.

1996-01-01

An approach for classifying and organizing spectra of highly excited vibrational states of molecules is investigated. As a specific example, we analyze the spectrum of an effective spectroscopic fitting Hamiltonian for H 2 O. In highly excited spectra, multiple resonance couplings and anharmonicity interact to give branching of the N original normal modes into new anharmonic modes, accompanied by the onset of widespread chaos. The anharmonic modes are identified by means of a bifurcation analysis of the spectroscopic Hamiltonian. A diabatic correlation diagram technique is developed to assign the levels with approximate open-quote open-quote dynamical close-quote close-quote quantum numbers corresponding to the dynamics determined from the bifurcation analysis. The resulting assignment shows significant disturbance from the conventional spectral pattern organization into sequences and progressions. The open-quote open-quote dynamical close-quote close-quote assignment is then converted into an assignment in terms of open-quote open-quote nominal close-quote close-quote quantum numbers that function like the N normal mode quantum numbers at low energy. The nominal assignments are used to reconstruct, as much as possible, an organization of the spectrum resembling the usual separation into sequences and progressions. copyright 1996 American Institute of Physics

Parentage assignment of progeny in mixed milt fertilization of ...

African Journals Online (AJOL)

Administrator

2011-06-13

Jun 13, 2011 ... individuals. Overall, 98.8% of progeny were assigned to their parents using Family Assignment. Program (FAP). Selection of hyper-variable microsatellites in Caspian brown trout to identify unique alleles was effective for unambiguous parentage determination and estimation of genetic diversity in this study.

Integrating Academic Journal Review Assignments into a Graduate Business Leadership Course

Science.gov (United States)

Schultz, Jennifer L.; Agrimonti, Lisa M.; Higbee, Jeanne L.

2016-01-01

Graduate course assignments that are pragmatic, challenging, scaffold prior learning, and support academic career aspirations can be difficult to create and even more problematic to assess for even the most experienced faculty. This paper presents a class assignment that incorporated a real-world journal reviewing assignment into an elective…

20 CFR 422.104 - Who can be assigned a social security number.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Who can be assigned a social security number... General Procedures § 422.104 Who can be assigned a social security number. (a) Persons eligible for SSN assignment. We can assign you a social security number if you meet the evidence requirements in § 422.107 and...

32 CFR 644.396 - Assignment of personnel to administer.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Assignment of personnel to administer. 644.396... PROPERTY REAL ESTATE HANDBOOK Disposal Predisposal Action § 644.396 Assignment of personnel to administer... responsible representative to each installation, or group of installations, to act under his staff supervision...

A Poster Assignment Connects Information Literacy and Writing Skills

Science.gov (United States)

Waters, Natalie

2015-01-01

This paper describes the implementation of a poster assignment in a writing and information literacy course required for undergraduate Life Sciences and Environmental Biology majors with the Faculty of Agricultural and Environmental Sciences at McGill University. The assignment was introduced in response to weaknesses identified through course…

42 CFR 421.114 - Assignment and reassignment of providers by CMS.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Assignment and reassignment of providers by CMS. 421.114 Section 421.114 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH... Assignment and reassignment of providers by CMS. CMS may assign or reassign any provider to any intermediary...

28 CFR 0.153 - Selection and assignment of employees for training.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Selection and assignment of employees for... Selection and assignment of employees for training. The Director of the Federal Bureau of Investigation, the....S.C. 4109, with respect to the selection and assignment of employees for training by, in, or through...

26 CFR 1.401(a)-13 - Assignment or alienation of benefits.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Assignment or alienation of benefits. 1.401(a...)-13 Assignment or alienation of benefits. (a) Scope of the regulations. This section applies only to..., provided for employer contributions. (b) No assignment or alienation—(1) General rule. Under section 401(a...

Single Photon Sources in Silicon Carbide

International Nuclear Information System (INIS)

Brett Johnson

2014-01-01

Single photon sources in semiconductors are highly sought after as they constitute the building blocks of a diverse range of emerging technologies such as integrated quantum information processing, quantum metrology and quantum photonics. In this presentation, we show the first observation of single photon emission from deep level defects in silicon carbide (SiC). The single photon emission is photo-stable at room temperature and surprisingly bright. This represents an exciting alternative to diamond color centers since SiC possesses well-established growth and device engineering protocols. The defect is assigned to the carbon vacancy-antisite pair which gives rise to the AB photoluminescence lines. We discuss its photo-physical properties and their fabrication via electron irradiation. Preliminary measurements on 3C SiC nano-structures will also be discussed. (author)

Electrochemistry of Hemin on Single-Crystal Au(111)-electrode Surfaces

DEFF Research Database (Denmark)

Zhang, Ling; Ulstrup, Jens; Zhang, Jingdong

adsorption on well-defined single-crystal Au(111)-electrode surfaces using electrochemistry combined with scanning tunnelling microscopy under electrochemical control. Hemin gives two voltammetric peaks assigned to adsorbed monomers and dimmers (Fig. 1B). In situ STM shows that hemin self...

76 FR 28301 - Reports, Forms, and Record Keeping Requirements

Science.gov (United States)

2011-05-16

... Regulations (section 106) Qualitative Research--Retailer Interviews. OMB Control Number: Not Assigned. Form... Respondents: 30. NHTSA will conduct two research phases. For the first phase, NHTSA will conduct two types of qualitative research. One research project will consist of two (2) focus groups in three (3) cities. Each...

Methods for forming particles

Science.gov (United States)

Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

2016-06-21

Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

Effective Homework Assignments. Research Brief

Science.gov (United States)

Cooper, Harris

2008-01-01

Perhaps more than any question other than "How much time should students spend doing homework?" parents and educators want to know, "What kinds of homework assignments are most effective?" Clearly, the answers to this question vary according to many factors, especially the developmental level of students and the topic area. Generally, answers are…

Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

NARCIS (Netherlands)

Jantratid, E; Prakongpan, S; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Barends, D M

2006-01-01

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned

Shape measurement system for single point incremental forming (SPIF) manufacts by using trinocular vision and random pattern

International Nuclear Information System (INIS)

Setti, Francesco; Bini, Ruggero; Lunardelli, Massimo; Bosetti, Paolo; Bruschi, Stefania; De Cecco, Mariolino

2012-01-01

Many contemporary works show the interest of the scientific community in measuring the shape of artefacts made by single point incremental forming. In this paper, we will present an algorithm able to detect feature points with a random pattern, check the compatibility of associations exploiting multi-stereo constraints and reject outliers and perform a 3D reconstruction by dense random patterns. The algorithm is suitable for a real-time application, in fact it needs just three images and a synchronous relatively fast processing. The proposed method has been tested on a simple geometry and results have been compared with a coordinate measurement machine acquisition. (paper)

Dynamic traffic assignment : genetic algorithms approach

Science.gov (United States)

1997-01-01

Real-time route guidance is a promising approach to alleviating congestion on the nations highways. A dynamic traffic assignment model is central to the development of guidance strategies. The artificial intelligence technique of genetic algorithm...

On some special cases of the restricted assignment problem

NARCIS (Netherlands)

Wang, C. (Chao); R.A. Sitters (René)

2016-01-01

textabstractWe consider some special cases of the restricted assignment problem. In this scheduling problem on parallel machines, any job j can only be assigned to one of the machines in its given subset Mj of machines. We give an LP-formulation for the problem with two job sizes and show that it

13 CFR 500.210 - Assignment or transfer of loans.

Science.gov (United States)

2010-01-01

... has the effect of distributing the risks of the credit among other Lenders if: (i) Neither the loan... be modified, assigned, conveyed, sold or otherwise transferred by the Lender, in whole or in part... assignment or transfer of less than 100 percent of a Lender's interest in the Loan Documents and Guarantee...

Binary Bees Algorithm - bioinspiration from the foraging mechanism of honeybees to optimize a multiobjective multidimensional assignment problem

Science.gov (United States)

Xu, Shuo; Ji, Ze; Truong Pham, Duc; Yu, Fan

2011-11-01

The simultaneous mission assignment and home allocation for hospital service robots studied is a Multidimensional Assignment Problem (MAP) with multiobjectives and multiconstraints. A population-based metaheuristic, the Binary Bees Algorithm (BBA), is proposed to optimize this NP-hard problem. Inspired by the foraging mechanism of honeybees, the BBA's most important feature is an explicit functional partitioning between global search and local search for exploration and exploitation, respectively. Its key parts consist of adaptive global search, three-step elitism selection (constraint handling, non-dominated solutions selection, and diversity preservation), and elites-centred local search within a Hamming neighbourhood. Two comparative experiments were conducted to investigate its single objective optimization, optimization effectiveness (indexed by the S-metric and C-metric) and optimization efficiency (indexed by computational burden and CPU time) in detail. The BBA outperformed its competitors in almost all the quantitative indices. Hence, the above overall scheme, and particularly the searching history-adapted global search strategy was validated.

Robust embryo identification using first polar body single nucleotide polymorphism microarray-based DNA fingerprinting.

Science.gov (United States)

Treff, Nathan R; Su, Jing; Kasabwala, Natasha; Tao, Xin; Miller, Kathleen A; Scott, Richard T

2010-05-01

This study sought to validate a novel, minimally invasive system for embryo tracking by single nucleotide polymorphism microarray-based DNA fingerprinting of the first polar body. First polar body-based assignments of which embryos implanted and were delivered after multiple ET were 100% consistent with previously validated embryo DNA fingerprinting-based assignments. Copyright 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

A parametric visualization software for the assignment problem

Directory of Open Access Journals (Sweden)

Papamanthou Charalampos

2005-01-01

Full Text Available In this paper we present a parametric visualization software used to assist the teaching of the Network Primal Simplex Algorithm for the assignment problem (AP. The assignment problem is a special case of the balanced transportation problem. The main functions of the algorithm and design techniques are also presented. Through this process, we aim to underline the importance and necessity of using such educational methods in order to improve the teaching of Computer Algorithms.

The Utility of Writing Assignments in Undergraduate Bioscience

Science.gov (United States)

Libarkin, Julie; Ording, Gabriel

2012-01-01

We tested the hypothesis that engagement in a few, brief writing assignments in a nonmajors science course can improve student ability to convey critical thought about science. A sample of three papers written by students (n = 30) was coded for presence and accuracy of elements related to scientific writing. Scores for different aspects of scientific writing were significantly correlated, suggesting that students recognized relationships between components of scientific thought. We found that students' ability to write about science topics and state conclusions based on data improved over the course of three writing assignments, while the abilities to state a hypothesis and draw clear connections between human activities and environmental impacts did not improve. Three writing assignments generated significant change in student ability to write scientifically, although our results suggest that three is an insufficient number to generate complete development of scientific writing skills. PMID:22383616

A search asymmetry reversed by figure-ground assignment.

Science.gov (United States)

Humphreys, G W; Müller, H

2000-05-01

We report evidence demonstrating that a search asymmetry favoring concave over convex targets can be reversed by altering the figure-ground assignment of edges in shapes. Visual search for a concave target among convex distractors is faster than search for a convex target among concave distractors (a search asymmetry). By using shapes with ambiguous local figure-ground relations, we demonstrated that search can be efficient (with search slopes around 10 ms/item) or inefficient (with search slopes around 30-40 ms/item) with the same stimuli, depending on whether edges are assigned to concave or convex "figures." This assignment process can operate in a top-down manner, according to the task set. The results suggest that attention is allocated to spatial regions following the computation of figure-ground relations in parallel across the elements present. This computation can also be modulated by top-down processes.

A generic method for assignment of reliability scores applied to solvent accessibility predictions

Directory of Open Access Journals (Sweden)

Nielsen Morten

2009-07-01

Full Text Available Abstract Background Estimation of the reliability of specific real value predictions is nontrivial and the efficacy of this is often questionable. It is important to know if you can trust a given prediction and therefore the best methods associate a prediction with a reliability score or index. For discrete qualitative predictions, the reliability is conventionally estimated as the difference between output scores of selected classes. Such an approach is not feasible for methods that predict a biological feature as a single real value rather than a classification. As a solution to this challenge, we have implemented a method that predicts the relative surface accessibility of an amino acid and simultaneously predicts the reliability for each prediction, in the form of a Z-score. Results An ensemble of artificial neural networks has been trained on a set of experimentally solved protein structures to predict the relative exposure of the amino acids. The method assigns a reliability score to each surface accessibility prediction as an inherent part of the training process. This is in contrast to the most commonly used procedures where reliabilities are obtained by post-processing the output. Conclusion The performance of the neural networks was evaluated on a commonly used set of sequences known as the CB513 set. An overall Pearson's correlation coefficient of 0.72 was obtained, which is comparable to the performance of the currently best public available method, Real-SPINE. Both methods associate a reliability score with the individual predictions. However, our implementation of reliability scores in the form of a Z-score is shown to be the more informative measure for discriminating good predictions from bad ones in the entire range from completely buried to fully exposed amino acids. This is evident when comparing the Pearson's correlation coefficient for the upper 20% of predictions sorted according to reliability. For this subset, values of 0

Crystallographic and single-particle analyses of native- and nucleotide-bound forms of the cystic fibrosis transmembrane conductance regulator (CFTR) protein.

Science.gov (United States)

Awayn, N H; Rosenberg, M F; Kamis, A B; Aleksandrov, L A; Riordan, J R; Ford, R C

2005-11-01

Cystic fibrosis, one of the major human inherited diseases, is caused by defects in the CFTR (cystic fibrosis transmembrane conductance regulator), a cell-membrane protein. CFTR acts as a chloride channel which can be opened by ATP. Low-resolution structural studies of purified recombinant human CFTR are described in the present paper. Localization of the C-terminal decahistidine tag in CFTR was achieved by Ni2+-nitriloacetate nanogold labelling, followed by electron microscopy and single-particle analysis. The presence of the gold label appears to improve the single-particle-alignment procedure. Projection structures of CFTR from two-dimensional crystals analysed by electron crystallography displayed two alternative conformational states in the presence of nucleotide and nanogold, but only one form of the protein was observed in the quiescent (nucleotide-free) state.

Interactive Level Design for iOS Assignment Delivery: A Case Study

Directory of Open Access Journals (Sweden)

Anson Brown

2014-02-01

Full Text Available This paper presents an application of an iOS-based online gaming assignment in a real classroom. The core concept of the project is a gameplay environment involving two players that have full control over creation and modification of levels. This level design mechanism was implemented in an iOS-based game in the area of genetics and based on an existing written assignment. The game includes support for both instructors, who have the ability to create and post assignments and students, who can take the assignments. Two trials of the iOS application consisted of in-class testing of twenty- one students. Students first took the original paper assignment, followed by the iOS version. Start times, end times, and grades were recorded for both versions. A comprehensive study of the grades and times for the iOS version of the assignment versus the paper version was conducted and is presented in this paper. Our Study showed that the iOS version was completed much faster in nearly every case while a strong delivery mechanism is needed to ensure student grades and completion of the assignment will not be affected. These results are not unexpected due to some major difference between the two formats. Future updates and additions will address any currently existing issues.

A Joint Link and Channel Assignment Routing Scheme for Cognitive Radio Networks

Directory of Open Access Journals (Sweden)

H.S.Zhao

2013-12-01

Full Text Available Cognitive radio (CR is a promising technology that enables opportunistic utilization of the temporarily vacant spectrum to mitigate the spectrum scarcity in wireless communications. Since secondary users (SUs should vacate the channel in use immediately after detecting the reappearances of primary users (PUs in cognitive radio networks (CRNs, the route reliability is a distinctive challenge for routing in CRNs. Furthermore, the throughput requirement of an SU session should be satisfied and it is always preferable to select a route with less negative influence on other current or latish sessions. To account for the route reliability challenge, we study the joint link and channel assignment routing problem for CRNs. It is formulated in a form of integer nonlinear programming (INLP, which is NP-hard, with the objective of minimizing the interference of a new route to other routes while providing route reliability and throughput guarantee. An on-demand route discovery algorithm is proposed to find reliable candidate paths, while a joint link and channel assignment routing algorithm with sequentially-connected-link coordination is proposed to choose the near-optimal route for improving the route reliability and minimizing negative influence. Simulation results demonstrate that the proposed algorithm achieves considerable improvement over existing schemes in both route reliability and throughput.

Properties of single crystal beta''-aluminas

International Nuclear Information System (INIS)

Bates, J.B.; Brown, G.M.; Kaneda, T.; Brundage, W.E.; Wang, J.C.; Engstrom, H.

1979-01-01

Large single crystals of sodium beta''-alumina were grown by slow evaporation of Na 2 O at 1690 0 C from a mixture of Na 2 CO 3 , MgO, and Al 2 O 3 . Polarized Raman measurements were made on the Na β'' single crystals and on single crystals of Li, K, Rb, and Ag β'' prepared by ion exchange of Na β''. The low frequency Raman spectra of Na, K, Rb, and Ag β'' contained four or more bands due to vibrations of the mobile cations. These results were analyzed by assuming the spectra to be due to the normal modes of a defect cluster consisting of a cation vacancy surrounded by three cations. From model calculations, the Raman band of Na β'' at 33 cm -1 is assigned to the attempt mode for diffusion of Na + ions. The structure of a Ag β'' single crystal was investigated by neutron diffraction, and 20% of the Ag + ion sites were found to be vacant

14 CFR 1245.109 - Assignment of title to NASA.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Assignment of title to NASA. 1245.109... INTELLECTUAL PROPERTY RIGHTS Patent Waiver Regulations § 1245.109 Assignment of title to NASA. (a) The instrument of waiver set forth in § 1245.115(c) shall be voided by NASA with respect to the domestic title to...

Cue competition affects temporal dynamics of edge-assignment in human visual cortex.

Science.gov (United States)

Brooks, Joseph L; Palmer, Stephen E

2011-03-01

Edge-assignment determines the perception of relative depth across an edge and the shape of the closer side. Many cues determine edge-assignment, but relatively little is known about the neural mechanisms involved in combining these cues. Here, we manipulated extremal edge and attention cues to bias edge-assignment such that these two cues either cooperated or competed. To index their neural representations, we flickered figure and ground regions at different frequencies and measured the corresponding steady-state visual-evoked potentials (SSVEPs). Figural regions had stronger SSVEP responses than ground regions, independent of whether they were attended or unattended. In addition, competition and cooperation between the two edge-assignment cues significantly affected the temporal dynamics of edge-assignment processes. The figural SSVEP response peaked earlier when the cues causing it cooperated than when they competed, but sustained edge-assignment effects were equivalent for cooperating and competing cues, consistent with a winner-take-all outcome. These results provide physiological evidence that figure-ground organization involves competitive processes that can affect the latency of figural assignment.

Task assignment and coaching

OpenAIRE

Dominguez-Martinez, S.

2009-01-01

An important task of a manager is to motivate her subordinates. One way in which a manager can give incentives to junior employees is through the assignment of tasks. How a manager allocates tasks in an organization, provides information to the junior employees about his ability. Without coaching from a manager, the junior employee only has information about his past performance. Based on his past performance, a talented junior who has performed a difficult task sometimes decides to leave the...

Using cooperative learning for a drug information assignment.

Science.gov (United States)

Earl, Grace L

2009-11-12

To implement a cooperative learning activity to engage students in analyzing tertiary drug information resources in a literature evaluation course. The class was divided into 4 sections to form expert groups and each group researched a different set of references using the jigsaw technique. Each member of each expert group was reassigned to a jigsaw group so that each new group was composed of 4 students from 4 different expert groups. The jigsaw groups met to discuss search strategies and rate the usefulness of the references. In addition to group-based learning, teaching methods included students' writing an independent research paper to enhance their abilities to search and analyze drug information resources. The assignment and final course grades improved after implementation of the activity. Students agreed that class discussions were a useful learning experience and 75% (77/102) said they would use the drug information references for other courses. The jigsaw technique was successful in engaging students in cooperative learning to improve critical thinking skills regarding drug information.

Implementing a cornerstone of culture change: Consistent staff assignment in VHA community living centers.

Science.gov (United States)

Lemke, Sonne; Brennan, Penny L; SooHoo, Sonya; Schutte, Kathleen K

2017-08-01

In 2011, the Veterans Health Administration (VHA) began implementing consistent staff assignment in its nursing homes (called Community Living Centers or CLCs). Consistent assignment, a cornerstone of culture change, minimizes the number of staff who provide a resident's care. The present research assessed the level and stability of consistent assignment in units within VHA CLCs and identified unit characteristics related to implementation of this staff assignment model. Schedulers in 185 of 335 organizational units that make up VHA CLCs completed a Staffing Practices Survey. For the month prior to the survey, 53% of CLC units had full implementation of consistent assignment. Tracked back over time, 37% of CLC units had stable high consistent assignment, 29% had stable low consistent assignment, and 34% were variable. Units with stable high consistent assignment were most likely to use care teams with stable membership and to obtain staff input for care assignments. Schedulers in these units reported more positive experiences with consistent staff assignment and better unit functioning in terms of staff absences, complaints about workload fairness, and resolution of scheduling problems. Units with stable low and variable consistent assignment were similar in most of these respects; however, units with variable consistent assignment made greater use of stable care teams and were less likely to change assignments at a staff member's request. Overall, consistent assignment implementation was not related to unit size, nursing hours per resident day, or specialty focus. Findings can help guide consistent staff assignment implementation in VHA and community nursing homes. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The impact of taxation on international assignment decisions: A principal-agent approach

OpenAIRE

Martini, Jan Thomas; Niemann, Rainer

2013-01-01

In many industries like management consulting, IT consulting, or construction highly qualified employees, i.e., experts or executive managers, have to be assigned to temporary projects. In firms with many employees and various different projects, this assignment decision involves a complex optimization procedure. Obviously, the employees’ productivities in the respective projects are crucial for the employer’s optimal assignment decision, but assignment can also be affected by risk-incent...

Automated Bug Assignment: Ensemble-based Machine Learning in Large Scale Industrial Contexts

OpenAIRE

Jonsson, Leif; Borg, Markus; Broman, David; Sandahl, Kristian; Eldh, Sigrid; Runeson, Per

2016-01-01

Bug report assignment is an important part of software maintenance. In particular, incorrect assignments of bug reports to development teams can be very expensive in large software development projects. Several studies propose automating bug assignment techniques using machine learning in open source software contexts, but no study exists for large-scale proprietary projects in industry. The goal of this study is to evaluate automated bug assignment techniques that are based on machine learni...

Extensive de novo solid-state NMR assignments of the 33 kDa C-terminal domain of the Ure2 prion

International Nuclear Information System (INIS)

Habenstein, Birgit; Wasmer, Christian; Bousset, Luc; Sourigues, Yannick; Schütz, Anne; Loquet, Antoine; Meier, Beat H.; Melki, Ronald; Böckmann, Anja

2011-01-01

We present the de novo resonance assignments for the crystalline 33 kDa C-terminal domain of the Ure2 prion using an optimized set of five 3D solid-state NMR spectra. We obtained, using a single uniformly 13 C, 15 N labeled protein sample, sequential chemical-shift information for 74% of the N, Cα, Cβ triples, and for 80% of further side-chain resonances for these spin systems. We describe the procedures and protocols devised, and discuss possibilities and limitations of the assignment of this largest protein assigned today by solid-state NMR, and for which no solution-state NMR shifts were available. A comparison of the NMR chemical shifts with crystallographic data reveals that regions with high crystallographic B-factors are particularly difficult to assign. While the secondary structure elements derived from the chemical shift data correspond mainly to those present in the X-ray crystal structure, we detect an additional helical element and structural variability in the protein crystal, most probably originating from the different molecules in the asymmetric unit, with the observation of doubled resonances in several parts, including entire stretches, of the protein. Our results provide the point of departure towards an atomic-resolution structural analysis of the C-terminal Ure2p domain in the context of the full-length prion fibrils.

Extensive de novo solid-state NMR assignments of the 33 kDa C-terminal domain of the Ure2 prion

Energy Technology Data Exchange (ETDEWEB)

Habenstein, Birgit [UMR 5086 CNRS/Universite de Lyon 1, Institut de Biologie et Chimie des Proteines (France); Wasmer, Christian [Harvard Medical School (United States); Bousset, Luc; Sourigues, Yannick [UPR 3082 CNRS, Laboratoire d' Enzymologie et Biochimie Structurales (France); Schuetz, Anne [ETH Zurich, Physical Chemistry (Switzerland); Loquet, Antoine [Max Planck Institute for Biophysical Chemistry (Germany); Meier, Beat H., E-mail: beme@ethz.ch [ETH Zurich, Physical Chemistry (Switzerland); Melki, Ronald, E-mail: melki@lebs.cnrs-gif.fr [UPR 3082 CNRS, Laboratoire d' Enzymologie et Biochimie Structurales (France); Boeckmann, Anja, E-mail: a.bockmann@ibcp.fr [UMR 5086 CNRS/Universite de Lyon 1, Institut de Biologie et Chimie des Proteines (France)

2011-11-15

We present the de novo resonance assignments for the crystalline 33 kDa C-terminal domain of the Ure2 prion using an optimized set of five 3D solid-state NMR spectra. We obtained, using a single uniformly {sup 13}C, {sup 15}N labeled protein sample, sequential chemical-shift information for 74% of the N, C{alpha}, C{beta} triples, and for 80% of further side-chain resonances for these spin systems. We describe the procedures and protocols devised, and discuss possibilities and limitations of the assignment of this largest protein assigned today by solid-state NMR, and for which no solution-state NMR shifts were available. A comparison of the NMR chemical shifts with crystallographic data reveals that regions with high crystallographic B-factors are particularly difficult to assign. While the secondary structure elements derived from the chemical shift data correspond mainly to those present in the X-ray crystal structure, we detect an additional helical element and structural variability in the protein crystal, most probably originating from the different molecules in the asymmetric unit, with the observation of doubled resonances in several parts, including entire stretches, of the protein. Our results provide the point of departure towards an atomic-resolution structural analysis of the C-terminal Ure2p domain in the context of the full-length prion fibrils.

An integer programming model for gate assignment problem at airline terminals

Science.gov (United States)

Chun, Chong Kok; Nordin, Syarifah Zyurina

2015-05-01

In this paper, we concentrate on a gate assignment problem (GAP) at the airlines terminal. Our problem is to assign an arrival plane to a suitable gate. There are two considerations needed to take. One of its is passenger walking distance from arrival gate to departure gate while another consideration is the transport baggage distance from one gate to another. Our objective is to minimize the total distance between the gates that related to assign the arrival plane to the suitable gates. An integer linear programming (ILP) model is proposed to solve this gate assignment problem. We also conduct a computational experiment using CPLEX 12.1 solver in AIMMS 3.10 software to analyze the performance of the model. Results of the computational experiments are presented. The efficiency of flights assignment is depends on the ratio of the weight for both total passenger traveling distances and total baggage transport distances.

Automated solid-state NMR resonance assignment of protein microcrystals and amyloids

Energy Technology Data Exchange (ETDEWEB)

Schmidt, Elena [Goethe University Frankfurt am Main, Center for Biomolecular Magnetic Resonance, Institute of Biophysical Chemistry (Germany); Gath, Julia [ETH Zurich, Physical Chemistry (Switzerland); Habenstein, Birgit [UMR 5086 CNRS/Universite de Lyon 1, Institut de Biologie et Chimie des Proteines (France); Ravotti, Francesco; Szekely, Kathrin; Huber, Matthias [ETH Zurich, Physical Chemistry (Switzerland); Buchner, Lena [Goethe University Frankfurt am Main, Center for Biomolecular Magnetic Resonance, Institute of Biophysical Chemistry (Germany); Boeckmann, Anja, E-mail: a.bockmann@ibcp.fr [UMR 5086 CNRS/Universite de Lyon 1, Institut de Biologie et Chimie des Proteines (France); Meier, Beat H., E-mail: beme@ethz.ch [ETH Zurich, Physical Chemistry (Switzerland); Guentert, Peter, E-mail: guentert@em.uni-frankfurt.de [Goethe University Frankfurt am Main, Center for Biomolecular Magnetic Resonance, Institute of Biophysical Chemistry (Germany)

2013-07-15

Solid-state NMR is an emerging structure determination technique for crystalline and non-crystalline protein assemblies, e.g., amyloids. Resonance assignment constitutes the first and often very time-consuming step to a structure. We present ssFLYA, a generally applicable algorithm for automatic assignment of protein solid-state NMR spectra. Application to microcrystals of ubiquitin and the Ure2 prion C-terminal domain, as well as amyloids of HET-s(218-289) and {alpha}-synuclein yielded 88-97 % correctness for the backbone and side-chain assignments that are classified as self-consistent by the algorithm, and 77-90 % correctness if also assignments classified as tentative by the algorithm are included.

Dynamics of water around the complex structures formed between the KH domains of far upstream element binding protein and single-stranded DNA molecules

Energy Technology Data Exchange (ETDEWEB)

Chakraborty, Kaushik; Bandyopadhyay, Sanjoy, E-mail: sanjoy@chem.iitkgp.ernet.in [Molecular Modeling Laboratory, Department of Chemistry, Indian Institute of Technology, Kharagpur 721302 (India)

2015-07-28

Single-stranded DNA (ss-DNA) binding proteins specifically bind to the single-stranded regions of the DNA and protect it from premature annealing, thereby stabilizing the DNA structure. We have carried out atomistic molecular dynamics simulations of the aqueous solutions of two DNA binding K homology (KH) domains (KH3 and KH4) of the far upstream element binding protein complexed with two short ss-DNA segments. Attempts have been made to explore the influence of the formation of such complex structures on the microscopic dynamics and hydrogen bond properties of the interfacial water molecules. It is found that the water molecules involved in bridging the ss-DNA segments and the protein domains form a highly constrained thin layer with extremely retarded mobility. These water molecules play important roles in freezing the conformational oscillations of the ss-DNA oligomers and thereby forming rigid complex structures. Further, it is demonstrated that the effect of complexation on the slow long-time relaxations of hydrogen bonds at the interface is correlated with hindered motions of the surrounding water molecules. Importantly, it is observed that the highly restricted motions of the water molecules bridging the protein and the DNA components in the complexed forms originate from more frequent hydrogen bond reformations.

Lower region: a new cue for figure-ground assignment.

Science.gov (United States)

Vecera, Shaun P; Vogel, Edward K; Woodman, Geoffrey F

2002-06-01

Figure-ground assignment is an important visual process; humans recognize, attend to, and act on figures, not backgrounds. There are many visual cues for figure-ground assignment. A new cue to figure-ground assignment, called lower region, is presented: Regions in the lower portion of a stimulus array appear more figurelike than regions in the upper portion of the display. This phenomenon was explored, and it was demonstrated that the lower-region preference is not influenced by contrast, eye movements, or voluntary spatial attention. It was found that the lower region is defined relative to the stimulus display, linking the lower-region preference to pictorial depth perception cues. The results are discussed in terms of the environmental regularities that this new figure-ground cue may reflect.

Chemical shift assignments of the partially deuterated Fyn SH2-SH3 domain.

Science.gov (United States)

Kieken, Fabien; Loth, Karine; van Nuland, Nico; Tompa, Peter; Lenaerts, Tom

2018-04-01

Src Homology 2 and 3 (SH2 and SH3) are two key protein interaction modules involved in regulating the activity of many proteins such as tyrosine kinases and phosphatases by respective recognition of phosphotyrosine and proline-rich regions. In the Src family kinases, the inactive state of the protein is the direct result of the interaction of the SH2 and the SH3 domain with intra-molecular regions, leading to a closed structure incompetent with substrate modification. Here, we report the 1 H, 15 N and 13 C backbone- and side-chain chemical shift assignments of the partially deuterated Fyn SH3-SH2 domain and structural differences between tandem and single domains. The BMRB accession number is 27165.

A single-cell view on the ecophysiology of anaerobic phototrophic bacteria

DEFF Research Database (Denmark)

Musat, Niculina; Halm, Hannah; Winterholler, Bärbel

2008-01-01

Quantitative information on the ecophysiology of individual microorganisms is generally limited because it is difficult to assign specific metabolic activities to identified single cells. Here, we develop and apply a method, Halogen In Situ Hybridization-Secondary Ion Mass Spectroscopy (HISH...

75 FR 55352 - Delegation of Authorities and Assignment of Responsibilities

Science.gov (United States)

2010-09-10

... DEPARTMENT OF LABOR Office of the Secretary Delegation of Authorities and Assignment of Responsibilities Secretary's Order 5-2010 Subject: Delegation of Authorities and Assignment of Responsibilities to... rather than the Administrator, WHD (see also Secretary's Order 3-2010). 5. Delegations of Authority and...

Isotopically pure single crystal epitaxial diamond films and their preparation

International Nuclear Information System (INIS)

Banholzer, W.F.; Anthony, T.R.; Williams, D.M.

1992-01-01

The present invention is directed to the production of single crystal diamond consisting of isotopically pure carbon-12 or carbon-13. In the present invention, isotopically pure single crystal diamond is grown on a single crystal substrate directly from isotopically pure carbon-12 or carbon-13. One method for forming isotopically pure single crystal diamond comprises the steps of placing in a reaction chamber a single substrate heated to an elevated diamond forming temperature. Another method for forming isotopically pure single crystal diamond comprises diffusing isotopically pure carbon-12 or carbon-13 through a metallic catalyst under high pressure to a region containing a single crystal substrate to form an isotopically pure single crystal diamond layer on said single crystal substrate

Smartnotebook: A semi-automated approach to protein sequential NMR resonance assignments

International Nuclear Information System (INIS)

Slupsky, Carolyn M.; Boyko, Robert F.; Booth, Valerie K.; Sykes, Brian D.

2003-01-01

Complete and accurate NMR spectral assignment is a prerequisite for high-throughput automated structure determination of biological macromolecules. However, completely automated assignment procedures generally encounter difficulties for all but the most ideal data sets. Sources of these problems include difficulty in resolving correlations in crowded spectral regions, as well as complications arising from dynamics, such as weak or missing peaks, or atoms exhibiting more than one peak due to exchange phenomena. Smartnotebook is a semi-automated assignment software package designed to combine the best features of the automated and manual approaches. The software finds and displays potential connections between residues, while the spectroscopist makes decisions on which connection is correct, allowing rapid and robust assignment. In addition, smartnotebook helps the user fit chains of connected residues to the primary sequence of the protein by comparing the experimentally determined chemical shifts with expected shifts derived from a chemical shift database, while providing bookkeeping throughout the assignment procedure

ZAP: a distributed channel assignment algorithm for cognitive radio networks

Directory of Open Access Journals (Sweden)

Munaretto Anelise

2011-01-01

Full Text Available Abstract We propose ZAP, an algorithm for the distributed channel assignment in cognitive radio (CR networks. CRs are capable of identifying underutilized licensed bands of the spectrum, allowing their reuse by secondary users without interfering with primary users. In this context, efficient channel assignment is challenging as ideally it must be simple, incur acceptable communication overhead, provide timely response, and be adaptive to accommodate frequent changes in the network. Another challenge is the optimization of network capacity through interference minimization. In contrast to related work, ZAP addresses these challenges with a fully distributed approach based only on local (neighborhood knowledge, while significantly reducing computational costs and the number of messages required for channel assignment. Simulations confirm the efficiency of ZAP in terms of (i the performance tradeoff between different metrics and (ii the fast achievement of a suitable assignment solution regardless of network size and density.

Statistical aspects of optimal treatment assignment

NARCIS (Netherlands)

van der Linden, Willem J.

The issues of treatment assignment is ordinarily dealt with within the framework of testing aptitude treatment interaction (ATI) hypothesis. ATI research mostly uses linear regression techniques, and an ATI exists when the aptitude treatment (AT) regression lines cross each other within the relevant

Privacy-Preserving Task Assignment in Spatial Crowdsourcing

KAUST Repository

Liu, An; Li, Zhi-Xu; Liu, Guan-Feng; Zheng, Kai; Zhang, Min; Li, Qing; Zhang, Xiangliang

2017-01-01

untrusted SC systems. In this paper, we study the problem of assigning workers to tasks in a way that location privacy for both workers and task requesters is preserved. We first combine the Paillier cryptosystem with Yao’s garbled circuits to construct a secure protocol that assigns the nearest worker to a task. Considering that this protocol cannot scale to a large number of workers, we then make use of Geohash, a hierarchical spatial index to design a more efficient protocol that can securely find approximate nearest workers. We theoretically show that these two protocols are secure against semi-honest adversaries. Through extensive experiments on two real-world datasets, we demonstrate the efficiency and effectiveness of our protocols.

Automated solid-state NMR resonance assignment of protein microcrystals and amyloids

International Nuclear Information System (INIS)

Schmidt, Elena; Gath, Julia; Habenstein, Birgit; Ravotti, Francesco; Székely, Kathrin; Huber, Matthias; Buchner, Lena; Böckmann, Anja; Meier, Beat H.; Güntert, Peter

2013-01-01

Solid-state NMR is an emerging structure determination technique for crystalline and non-crystalline protein assemblies, e.g., amyloids. Resonance assignment constitutes the first and often very time-consuming step to a structure. We present ssFLYA, a generally applicable algorithm for automatic assignment of protein solid-state NMR spectra. Application to microcrystals of ubiquitin and the Ure2 prion C-terminal domain, as well as amyloids of HET-s(218–289) and α-synuclein yielded 88–97 % correctness for the backbone and side-chain assignments that are classified as self-consistent by the algorithm, and 77–90 % correctness if also assignments classified as tentative by the algorithm are included

AN EVOLUTIONARY ALGORITHM FOR CHANNEL ASSIGNMENT PROBLEM IN WIRELESS MOBILE NETWORKS

Directory of Open Access Journals (Sweden)

Yee Shin Chia

2012-12-01

Full Text Available The channel assignment problem in wireless mobile network is the assignment of appropriate frequency spectrum to incoming calls while maintaining a satisfactory level of electromagnetic compatibility (EMC constraints. An effective channel assignment strategy is important due to the limited capacity of frequency spectrum in wireless mobile network. Most of the existing channel assignment strategies are based on deterministic methods. In this paper, an adaptive genetic algorithm (GA based channel assignment strategy is introduced for resource management and to reduce the effect of EMC interferences. The most significant advantage of the proposed optimization method is its capability to handle both the reassignment of channels for existing calls as well as the allocation of channel to a new incoming call in an adaptive process to maximize the utility of the limited resources. It is capable to adapt the population size to the number of eligible channels for a particular cell upon new call arrivals to achieve reasonable convergence speed. The MATLAB simulation on a 49-cells network model for both uniform and nonuniform call traffic distributions showed that the proposed channel optimization method can always achieve a lower average new incoming call blocking probability compared to the deterministic based channel assignment strategy.

The "Outsider/Insider" Assignment: A Pedagogical Innovation for Teaching Cross-Cultural Understanding

Science.gov (United States)

Garcia, Angela Cora

2014-01-01

In this paper, I describe an innovative assignment for teaching undergraduate students cross-cultural understanding. The Outsider/Insider assignment simultaneously teaches facts about cultural difference and skills for managing cross-cultural encounters. Briefly, the assignment is to write two short papers, one in which the student describes a…

Moving beyond "Bookish Knowledge": Using Film-Based Assignments to Promote Deep Learning

Science.gov (United States)

Olson, Joann S.; Autry, Linda; Moe, Jeffry

2016-01-01

This article investigates the effectiveness of a film-based assignment given to adult learners in a graduate-level group counseling class. Semi-structured interviews were conducted with four students; data analysis suggested film-based assignments may promote deep approaches to learning (DALs). Participants indicated the assignment helped them…

Automated assignment and 3D structure calculations using combinations of 2D homonuclear and 3D heteronuclear NOESY spectra

International Nuclear Information System (INIS)

Oezguen, Numan; Adamian, Larisa; Xu Yuan; Rajarathnam, Krishna; Braun, Werner

2002-01-01

The NOAH/DIAMOD suite uses feedback filtering and self-correcting distance geometry to generate 3D structures from unassigned NOESY spectra. In this study we determined the minimum set of experiments needed to generate a high quality structure bundle. Different combinations of 3D 15 N-edited, 13 C-edited HSQC-NOESY and 2D homonuclear 1 H- 1 H NOESY spectra of the 77 amino acid protein, myeloid progenitor inhibitory factor-1 (MPIF-1) were used as input for NOAH/DIAMOD calculations. The quality of the assignments of NOESY cross peaks and the accuracy of the automatically generated 3D structures were compared to those obtained with a conventional manual procedure. Combining data from two types of experiments synergistically increased the number of peaks assigned unambiguously in both individual spectra. As a general trend for the accuracy of the structures we observed structural variations in the backbone fold of the final structures of about 2 A for single spectral data, of 1 A to 1.5 A for double spectral data, and of 0.6 A for triple spectral data sets. The quality of the assignments and 3D structures from the optimal data using all three spectra were similar to those obtained from traditional assignment methods with structural variations within the bundle of 0.6 A and 1.3 A for backbone and heavy atoms, respectively. Almost all constraints (97%) of the automatic NOESY cross peak assignments were cross compatible with the structures from the conventional manual assignment procedure, and an even larger proportion (99%) of the manually derived constraints were compatible with the automatically determined 3D structures. The two mean structures determined by both methods differed only by 1.3 A rmsd for the backbone atoms in the well-defined regions of the protein. Thus NOAD/DIAMOD analysis of spectra from labeled proteins provides a reliable method for high throughput analysis of genomic targets

Tabu search for target-radar assignment

DEFF Research Database (Denmark)

Hindsberger, Magnus; Vidal, Rene Victor Valqui

2000-01-01

In the paper the problem of assigning air-defense illumination radars to enemy targets is presented. A tabu search metaheuristic solution is described and the results achieved are compared to those of other heuristic approaches, implementation and experimental aspects are discussed. It is argued ...

Semi-infinite assignment and transportation games

NARCIS (Netherlands)

Timmer, Judith B.; Sánchez-Soriano, Joaqu´ın; Llorca, Navidad; Tijs, Stef; Goberna, Miguel A.; López, Marco A.

2001-01-01

Games corresponding to semi-infinite transportation and related assignment situations are studied. In a semi-infinite transportation situation, one aims at maximizing the profit from the transportation of a certain good from a finite number of suppliers to an infinite number of demanders. An

ERROR ANALYSIS ON INFORMATION AND TECHNOLOGY STUDENTS’ SENTENCE WRITING ASSIGNMENTS

Directory of Open Access Journals (Sweden)

Rentauli Mariah Silalahi

2015-03-01

Full Text Available Students’ error analysis is very important for helping EFL teachers to develop their teaching materials, assessments and methods. However, it takes much time and effort from the teachers to do such an error analysis towards their students’ language. This study seeks to identify the common errors made by 1 class of 28 freshmen students studying English in their first semester in an IT university. The data is collected from their writing assignments for eight consecutive weeks. The errors found were classified into 24 types and the top ten most common errors committed by the students were article, preposition, spelling, word choice, subject-verb agreement, auxiliary verb, plural form, verb form, capital letter, and meaningless sentences. The findings about the students’ frequency of committing errors were, then, contrasted to their midterm test result and in order to find out the reasons behind the error recurrence; the students were given some questions to answer in a questionnaire format. Most of the students admitted that careless was the major reason for their errors and lack understanding came next. This study suggests EFL teachers to devote their time to continuously check the students’ language by giving corrections so that the students can learn from their errors and stop committing the same errors.

Sequential, Multiple Assignment, Randomized Trial Designs in Immuno-oncology Research.

Science.gov (United States)

Kidwell, Kelley M; Postow, Michael A; Panageas, Katherine S

2018-02-15

Clinical trials investigating immune checkpoint inhibitors have led to the approval of anti-CTLA-4 (cytotoxic T-lymphocyte antigen-4), anti-PD-1 (programmed death-1), and anti-PD-L1 (PD-ligand 1) drugs by the FDA for numerous tumor types. In the treatment of metastatic melanoma, combinations of checkpoint inhibitors are more effective than single-agent inhibitors, but combination immunotherapy is associated with increased frequency and severity of toxicity. There are questions about the use of combination immunotherapy or single-agent anti-PD-1 as initial therapy and the number of doses of either approach required to sustain a response. In this article, we describe a novel use of sequential, multiple assignment, randomized trial (SMART) design to evaluate immune checkpoint inhibitors to find treatment regimens that adapt within an individual based on intermediate response and lead to the longest overall survival. We provide a hypothetical example SMART design for BRAF wild-type metastatic melanoma as a framework for investigating immunotherapy treatment regimens. We compare implementing a SMART design to implementing multiple traditional randomized clinical trials. We illustrate the benefits of a SMART over traditional trial designs and acknowledge the complexity of a SMART. SMART designs may be an optimal way to find treatment strategies that yield durable response, longer survival, and lower toxicity. Clin Cancer Res; 24(4); 730-6. ©2017 AACR . ©2017 American Association for Cancer Research.

Stoplight Grid: a color-coded visual system for per diem staff assignment.

Science.gov (United States)

Ernst, P

1989-02-01

What is the best way to appropriately assign per diem nursing personnel? The author describes a systematic approach to per diem staff assignment called the Stoplight Grid. The Stoplight Grid correlates staff skills and preferences with unit needs and integrates this data into a color-coded system for staff assignment.

30 CFR 285.408 - May I assign my lease or grant interest?

Science.gov (United States)

2010-07-01

... RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Lease and Grant... application to MMS. The assignment application must include: (1) The MMS-assigned lease or grant number; (2) A... required financial assurance. (c) If you submit an application to assign a lease or grant, you will...

7 CFR 929.150 - Transfer or assignment of sales history.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Transfer or assignment of sales history. 929.150... MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE... Transfer or assignment of sales history. (a) If indebtedness is incurred with regard to the acreage to...

Assigning Main Orientation to an EOH Descriptor on Multispectral Images.

Science.gov (United States)

Li, Yong; Shi, Xiang; Wei, Lijun; Zou, Junwei; Chen, Fang

2015-07-01

This paper proposes an approach to compute an EOH (edge-oriented histogram) descriptor with main orientation. EOH has a better matching ability than SIFT (scale-invariant feature transform) on multispectral images, but does not assign a main orientation to keypoints. Alternatively, it tends to assign the same main orientation to every keypoint, e.g., zero degrees. This limits EOH to matching keypoints between images of translation misalignment only. Observing this limitation, we propose assigning to keypoints the main orientation that is computed with PIIFD (partial intensity invariant feature descriptor). In the proposed method, SIFT keypoints are detected from images as the extrema of difference of Gaussians, and every keypoint is assigned to the main orientation computed with PIIFD. Then, EOH is computed for every keypoint with respect to its main orientation. In addition, an implementation variant is proposed for fast computation of the EOH descriptor. Experimental results show that the proposed approach performs more robustly than the original EOH on image pairs that have a rotation misalignment.

Multi Stage Strategies for Single Point Incremental Forming of a Cup

DEFF Research Database (Denmark)

Skjødt, Martin; Bay, Niels; Endelt, Benny

2008-01-01

A five stage forming strategy for forming of a circular cylindrical cup with a height/radius ratio of one is presented. Geometrical relations are discussed and theoretical strains are calculated. The influence of forming direction (upwards or downwards) is investigated for the second stage...... comparing explicit FE analysis with experiments. Good agreement is found between calculated and measured thickness distribution, overall geometry and strains. Using the proposed multi stage strategy it is shown possible to produce a cup with a height close to the radius and side parallel to the symmetry...

PARAssign-paramagnetic NMR assignments of protein nuclei on the basis of pseudocontact shifts

Energy Technology Data Exchange (ETDEWEB)

Skinner, Simon P., E-mail: skinnersp@chem.leidenuniv.nl [Leiden University, Gorlaeus Laboratories, Leiden Institute of Chemistry (Netherlands); Moshev, Mois, E-mail: mois@monomon.me [Leiden University, Leiden Institute of Advanced Computer Science (Netherlands); Hass, Mathias A. S., E-mail: hassmas@chem.leidenuniv.nl; Ubbink, Marcellus, E-mail: m.ubbink@chem.leidenuniv.nl [Leiden University, Gorlaeus Laboratories, Leiden Institute of Chemistry (Netherlands)

2013-04-15

The use of paramagnetic NMR data for the refinement of structures of proteins and protein complexes is widespread. However, the power of paramagnetism for protein assignment has not yet been fully exploited. PARAssign is software that uses pseudocontact shift data derived from several paramagnetic centers attached to the protein to obtain amide and methyl assignments. The ability of PARAssign to perform assignment when the positions of the paramagnetic centers are known and unknown is demonstrated. PARAssign has been tested using synthetic data for methyl assignment of a 47 kDa protein, and using both synthetic and experimental data for amide assignment of a 14 kDa protein. The complex fitting space involved in such an assignment procedure necessitates that good starting conditions are found, both regarding placement and strength of paramagnetic centers. These starting conditions are obtained through automated tensor placement and user-defined tensor parameters. The results presented herein demonstrate that PARAssign is able to successfully perform resonance assignment in large systems with a high degree of reliability. This software provides a method for obtaining the assignments of large systems, which may previously have been unassignable, by using 2D NMR spectral data and a known protein structure.

LOW POWER RACE-FREE STATE ASSIGNMENT OF AN ASYNGHRONOUS AUTOMATON

Directory of Open Access Journals (Sweden)

Yu. V. Pottosin

2015-01-01

Full Text Available The problem of a race free state assignment of an asynchronous automaton is considered. A method for the state assignment is suggested that provides the minimization of the number and theswitching activity of the memory elements along with the elimination of the critical races betweenthem.

Capacity constrained assignment in spatial databases

DEFF Research Database (Denmark)

U, Leong Hou; Yiu, Man Lung; Mouratidis, Kyriakos

2008-01-01

large to fit in main memory. Motivated by this fact, we propose efficient algorithms for optimal assignment that employ novel edge-pruning strategies, based on the spatial properties of the problem. Additionally, we develop approximate (i.e., suboptimal) CCA solutions that provide a trade-off between...

A Method Based on Dial's Algorithm for Multi-time Dynamic Traffic Assignment

Directory of Open Access Journals (Sweden)

Rongjie Kuang

2014-03-01

Full Text Available Due to static traffic assignment has poor performance in reflecting actual case and dynamic traffic assignment may incurs excessive compute cost, method of multi-time dynamic traffic assignment combining static and dynamic traffic assignment balances factors of precision and cost effectively. A method based on Dial's logit algorithm is proposed in the article to solve the dynamic stochastic user equilibrium problem in dynamic traffic assignment. Before that, a fitting function that can proximately reflect overloaded traffic condition of link is proposed and used to give corresponding model. Numerical example is given to illustrate heuristic procedure of method and to compare results with one of same example solved by other literature's algorithm. Results show that method based on Dial's algorithm is preferable to algorithm from others.

Effectiveness of author-assigned keywords to INIS indexing

International Nuclear Information System (INIS)

Yokoo, Hiroshi; Takahashi, Satoko; Habara, Tadashi

1977-01-01

A test was carried out on the quality of indexing data which is based only upon author-assigned keywords in order to appreciate effectiveness of the keywords. As measures of the quality, the retrievability and the consistency of the indexing data were evaluated by comparison with the case of the conventional indexing method under the circumstances of the INIS descriptor assignment to the journal articles of the Atomic Energy Society of Japan. The indexing consistency obtained was approximately 0.61 on an average (or 0.66 when the narrower-broader hierarchical relations were regarded as consistent ones). Of the hit, noise, or total documents retrieved with the conventional indexing data, 0.86, 0.27, or 0.71, respectively, were retrievable with the keywords-based indexing data. From the results the recall ratio for the keywords-based indexing is estimated to be no less than 0.86 of that for the conventional indexing method, and the consistency of the hit documents are to be 0.75 at least. Consequently, the author-assigned keywords proved to be very effective to the document indexing. (auth.)

Automated sequence-specific protein NMR assignment using the memetic algorithm MATCH

International Nuclear Information System (INIS)

Volk, Jochen; Herrmann, Torsten; Wuethrich, Kurt

2008-01-01

MATCH (Memetic Algorithm and Combinatorial Optimization Heuristics) is a new memetic algorithm for automated sequence-specific polypeptide backbone NMR assignment of proteins. MATCH employs local optimization for tracing partial sequence-specific assignments within a global, population-based search environment, where the simultaneous application of local and global optimization heuristics guarantees high efficiency and robustness. MATCH thus makes combined use of the two predominant concepts in use for automated NMR assignment of proteins. Dynamic transition and inherent mutation are new techniques that enable automatic adaptation to variable quality of the experimental input data. The concept of dynamic transition is incorporated in all major building blocks of the algorithm, where it enables switching between local and global optimization heuristics at any time during the assignment process. Inherent mutation restricts the intrinsically required randomness of the evolutionary algorithm to those regions of the conformation space that are compatible with the experimental input data. Using intact and artificially deteriorated APSY-NMR input data of proteins, MATCH performed sequence-specific resonance assignment with high efficiency and robustness

A code reviewer assignment model incorporating the competence differences and participant preferences

Directory of Open Access Journals (Sweden)

Wang Yanqing

2016-03-01

Full Text Available A good assignment of code reviewers can effectively utilize the intellectual resources, assure code quality and improve programmers’ skills in software development. However, little research on reviewer assignment of code review has been found. In this study, a code reviewer assignment model is created based on participants’ preference to reviewing assignment. With a constraint of the smallest size of a review group, the model is optimized to maximize review outcomes and avoid the negative impact of “mutual admiration society”. This study shows that the reviewer assignment strategies incorporating either the reviewers’ preferences or the authors’ preferences get much improvement than a random assignment. The strategy incorporating authors’ preference makes higher improvement than that incorporating reviewers’ preference. However, when the reviewers’ and authors’ preference matrixes are merged, the improvement becomes moderate. The study indicates that the majority of the participants have a strong wish to work with reviewers and authors having highest competence. If we want to satisfy the preference of both reviewers and authors at the same time, the overall improvement of learning outcomes may be not the best.

Automatic Assignment of Methyl-NMR Spectra of Supramolecular Machines Using Graph Theory.

Science.gov (United States)

Pritišanac, Iva; Degiacomi, Matteo T; Alderson, T Reid; Carneiro, Marta G; Ab, Eiso; Siegal, Gregg; Baldwin, Andrew J

2017-07-19

Methyl groups are powerful probes for the analysis of structure, dynamics and function of supramolecular assemblies, using both solution- and solid-state NMR. Widespread application of the methodology has been limited due to the challenges associated with assigning spectral resonances to specific locations within a biomolecule. Here, we present Methyl Assignment by Graph Matching (MAGMA), for the automatic assignment of methyl resonances. A graph matching protocol examines all possibilities for each resonance in order to determine an exact assignment that includes a complete description of any ambiguity. MAGMA gives 100% accuracy in confident assignments when tested against both synthetic data, and 9 cross-validated examples using both solution- and solid-state NMR data. We show that this remarkable accuracy enables a user to distinguish between alternative protein structures. In a drug discovery application on HSP90, we show the method can rapidly and efficiently distinguish between possible ligand binding modes. By providing an exact and robust solution to methyl resonance assignment, MAGMA can facilitate significantly accelerated studies of supramolecular machines using methyl-based NMR spectroscopy.

Single frequency intracavity SRO

DEFF Research Database (Denmark)

Abitan, Haim; Buchhave, Preben

2000-01-01

Summary form only given. A single resonance optical parametric oscillator (SRO) is inserted intracavity to a CW high power, single frequency, and ring Nd:YVO4 laser. We obtain a stable single frequency CW SRO with output at 1.7-1.9 μm (idler) and a resonating signal at 2.3-2.6 μm. The behavior...

Final report on CCQM-K80: Comparison of value-assigned CRMs and PT materials: Creatinine in human serum

Science.gov (United States)

Camara, Johanna E.; Duewer, David L.; Gasca Aragon, Hugo; Lippa, Katrice A.; Toman, Blaza

2013-01-01

The 2009 CCQM-K80 'Comparison of value-assigned CRMs and PT materials: creatinine in human serum' is the first in a series of key comparisons directly testing the chemical measurement services provided to customers by National Metrology Institutes (NMIs) and Designated Institutes. CCQM-K80 compared the assigned serum creatinine values of certified reference materials (CRMs) using measurements made on these materials under repeatability conditions. Six NMIs submitted 17 CRM materials for evaluation, all intended for sale to customers. These materials represent nearly all of the higher-order CRMs then available for this clinically important measurand. The certified creatinine mass fraction in the materials ranged from 3 mg/kg to 57 mg/kg. All materials were stored and prepared according the specifications provided by each NMI. Samples were processed and analyzed under repeatability conditions by one analyst using isotope dilution liquid chromatography-mass spectrometry. The instrumental repeatability imprecision, expressed as a percent relative standard deviation, was 1.2%. Given the number of materials and the time required for each analysis, the measurements were made in two measurement campaigns ('runs'). In both campaigns, replicate analyses (two injections of one preparation separated in time) were made on each of two or three independently prepared aliquots from one randomly selected unit of each of the 17 materials. The mean value, between-campaign, between-aliquot and between-replicate variance components, standard uncertainty of the mean value, and the number of degrees of freedom associated with the standard uncertainty were estimated using a linear mixed model. Since several of the uncertainties estimated using this traditional frequentist approach were associated with a single degree of freedom, Markov Chain Monte Carlo Bayesian analysis was used to estimate 95% level-of-confidence coverage intervals, U95. Uncertainty-weighted generalized distance

Organic Chemistry YouTube Writing Assignment for Large Lecture Classes

Science.gov (United States)

Franz, Annaliese K.

2012-01-01

This work describes efforts to incorporate and evaluate the use of a YouTube writing assignment in large lecture classes to personalize learning and improve conceptual understanding of chemistry through peer- and self-explanation strategies. Although writing assignments can be a method to incorporate peer- and self-explanation strategies, this…

Negotiating Languages and Cultures: Enacting Translingualism through a Translation Assignment

Science.gov (United States)

Kiernan, Julia; Meier, Joyce; Wang, Xiqiao

2016-01-01

This collaborative project explores the affordances of a translation assignment in the context of a learner-centered pedagogy that places composition students' movement among languages and cultures as both a site for inquiry and subject of analysis. The translation assignment asks students to translate scholarly articles or culture stories from…

Students' Evaluation of Writing Assignments in an Abnormal Psychology Course.

Science.gov (United States)

Procidano, Mary E.

1991-01-01

Presents a study in which students in an abnormal psychology class rated the usefulness of drafts for two writing assignments. Reports that a research proposal was more effective than a case study in generating interest in psychology and opportunity for creativity. Concludes that writing assignments should reflect important aspects of a…

Bacteria as bullies: effects of linguistic agency assignment in health message.

Science.gov (United States)

Bell, Robert A; McGlone, Matthew S; Dragojevic, Marko

2014-01-01

When describing health threats, communicators can assign agency to the threat (e.g., "Hepatitis C has infected 4 million Americans") or to humans (e.g., "Four million Americans have contracted hepatitis C"). In an online experiment, the authors explored how assignment of agency affects perceptions of susceptibility and severity of a health threat, response efficacy, self-efficacy, fear arousal, and intentions to adopt health-protective recommendations. Participants were 719 individuals recruited through Mechanical Turk ( www.mturk.com ), a crowdsource labor market run by Amazon ( www.amazon.com ). The participants were assigned randomly to read 1 of 8 flyers defined by a 2×4 (Agency Assignment×Topic) factorial design. Each flyer examined 1 health threat (E. coli, necrotizing fasciitis, salmonella, or Carbapenem-resistant Klebsiella pneumoniae) and was written in language that emphasized bacterial or human agency. Perceived susceptibility and severity were highest when bacterial agency language was used. Response efficacy, self-efficacy, and fear arousal were not significantly affected by agency assignment. Participants reported stronger intentions to adopt recommendations when bacteria agency language was used, but this effect did not reach conventional standards of significance (p < .051). The authors concluded that health communicators can increase target audiences' perceptions of susceptibility and severity by assigning agency to the threat in question when devising health messages.

A Stone Resource Assignment Model under the Fuzzy Environment

Directory of Open Access Journals (Sweden)

Liming Yao

2012-01-01

to tackle a stone resource assignment problem with the aim of decreasing dust and waste water emissions. On the upper level, the local government wants to assign a reasonable exploitation amount to each stone plant so as to minimize total emissions and maximize employment and economic profit. On the lower level, stone plants must reasonably assign stone resources to produce different stone products under the exploitation constraint. To deal with inherent uncertainties, the object functions and constraints are defuzzified using a possibility measure. A fuzzy simulation-based improved simulated annealing algorithm (FS-ISA is designed to search for the Pareto optimal solutions. Finally, a case study is presented to demonstrate the practicality and efficiency of the model. Results and a comparison analysis are presented to highlight the performance of the optimization method, which proves to be very efficient compared with other algorithms.

Wildlife forensic science: A review of genetic geographic origin assignment.

Science.gov (United States)

Ogden, Rob; Linacre, Adrian

2015-09-01

Wildlife forensic science has become a key means of enforcing legislation surrounding the illegal trade in protected and endangered species. A relatively new dimension to this area of forensic science is to determine the geographic origin of a seized sample. This review focuses on DNA testing, which relies on assignment of an unknown sample to its genetic population of origin. Key examples of this are the trade in timber, fish and ivory and these are used only to illustrate the large number of species for which this type of testing is potentially available. The role of mitochondrial and nuclear DNA markers is discussed, alongside a comparison of neutral markers with those exhibiting signatures of selection, which potentially offer much higher levels of assignment power to address specific questions. A review of assignment tests is presented along with detailed methods for evaluating error rates and considerations for marker selection. The availability and quality of reference data are of paramount importance to support assignment applications and ensure reliability of any conclusions drawn. The genetic methods discussed have been developed initially as investigative tools but comment is made regarding their use in courts. The potential to compliment DNA markers with elemental assays for greater assignment power is considered and finally recommendations are made for the future of this type of testing. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Reflective practice: assessment of assignments in English for Specific Purposes

Directory of Open Access Journals (Sweden)

Galina Kavaliauskiené

2007-10-01

Full Text Available The construct alternative assessment has been widely used in higher education. It is often defined as any type of assessment of learners who provide a response to an assignment. The key features of alternative assessment are active participation of learners in self-evaluation of their performance, and the development of reflective thinking through reflective thinking (Schön, 1983. The success of alternative assessment in language teaching is predetermined by student’s performance and demonstrates learner’s language proficiency in contemporary communicative classrooms. This paper aims at researching the influence of students’ evaluations of various assignments for their linguistic development in English for Specific Purposes (ESP. The study uses learners’ assessment of different assignments and learners’ in-course and post-course written reflections on benefits to language mastery. Learners’ assignments included were contributions to portfolios (dossiers, such as essays and summaries, oral presentations, short impromptu talks, creative tasks, tests, and self-assessment notes (reflections on activities in learning ESP. Findings were obtained for two streams of the project participants. Results showed that self-assessment was beneficial for learners’ linguistic development. The context of learners’ reflections reveals that the attitudes to various assignments are affected by success or failure in students’ performance. Reflective practice might help teachers develop ways of dealing with previously identified difficulties and improve the quality of teaching.

Effects of magnetic pre-alignment of nano-powders on formation of high textured barium hexa-ferrite quasi-single crystals via a magnetic forming and liquid participation sintering route

International Nuclear Information System (INIS)

Liu, Junliang; Zeng, Yanwei; Zhang, Xingkai; Zhang, Ming

2015-01-01

Highly textured barium hexa-ferrite quasi-single crystal with narrow ferromagnetic resonance line-width is believed to be a potential gyromagnetic material for self-biased microwave devices. To fabricate barium hexa-ferrite quasi-single crystal with a high grain orientation degree, a magnetic forming and liquid participation sintering route has been developed. In this paper, the effects of the pre-alignment of the starting nano-powders on the formation of barium quasi-single crystal structures have been investigated. The results indicated that: the crystallites with large sizes and small specific surfaces were easily aligned for they got higher driving forces and lower resistances during magnetic forming. The average restricting magnetic field was about 4.647 kOe to overcome the average friction barrier between crystallites. The pre-aligned crystallites in magnetic forming acted as the “crystal seeds” for oriented growth of the un-aligned crystallites during liquid participation sintering to achieve a high grain orientation. To effectively promote the grain orientation degrees of the sintered pellets, the grain orientation degrees of the green compacts must be higher than a limited value of 15.0%. Barium hexa-ferrite quasi-single crystal with a high grain orientation degree of 98.6% was successfully fabricated after sintering the green compact with its grain orientation degree of 51.1%. - Highlights: • Aligned particles acted as “crystal seeds” for un-aligned ones' oriented growth. • Magnetic field of 4.647 kOe was needed to overcome crystallites' friction barrier. • GOD dramatically increased after sintering if starting GOD exceeded to 15.0%. • Quasi-single crystal was prepared by sintering green compact with GOD of 51.1%

Effects of magnetic pre-alignment of nano-powders on formation of high textured barium hexa-ferrite quasi-single crystals via a magnetic forming and liquid participation sintering route

Energy Technology Data Exchange (ETDEWEB)

Liu, Junliang, E-mail: liujunliang@yzu.edu.cn [Key Laboratory of Environmental Materials and Engineering of Jiangsu Province, School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002 (China); Zeng, Yanwei [State Key Laboratory of Materials-Oriented Chemical Engineering, School of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009 (China); Zhang, Xingkai [Key Laboratory of Environmental Materials and Engineering of Jiangsu Province, School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002 (China); Zhang, Ming [Key Laboratory of Environmental Materials and Engineering of Jiangsu Province, School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002 (China); Testing Center of Yangzhou University, Yangzhou 225002 (China)

2015-05-15

Highly textured barium hexa-ferrite quasi-single crystal with narrow ferromagnetic resonance line-width is believed to be a potential gyromagnetic material for self-biased microwave devices. To fabricate barium hexa-ferrite quasi-single crystal with a high grain orientation degree, a magnetic forming and liquid participation sintering route has been developed. In this paper, the effects of the pre-alignment of the starting nano-powders on the formation of barium quasi-single crystal structures have been investigated. The results indicated that: the crystallites with large sizes and small specific surfaces were easily aligned for they got higher driving forces and lower resistances during magnetic forming. The average restricting magnetic field was about 4.647 kOe to overcome the average friction barrier between crystallites. The pre-aligned crystallites in magnetic forming acted as the “crystal seeds” for oriented growth of the un-aligned crystallites during liquid participation sintering to achieve a high grain orientation. To effectively promote the grain orientation degrees of the sintered pellets, the grain orientation degrees of the green compacts must be higher than a limited value of 15.0%. Barium hexa-ferrite quasi-single crystal with a high grain orientation degree of 98.6% was successfully fabricated after sintering the green compact with its grain orientation degree of 51.1%. - Highlights: • Aligned particles acted as “crystal seeds” for un-aligned ones' oriented growth. • Magnetic field of 4.647 kOe was needed to overcome crystallites' friction barrier. • GOD dramatically increased after sintering if starting GOD exceeded to 15.0%. • Quasi-single crystal was prepared by sintering green compact with GOD of 51.1%.

Teaching Complaint and Adjustment Letters--And Tact (My Favorite Assignment).

Science.gov (United States)

Deimling, Paula

1992-01-01

Describes a three-part assignment in which each student writes a complaint letter and an adjustment letter responding to another student's complaint letter. Discusses how the third part of the assignment--journal entries--allows students to formulate their own criteria for excellent letters based upon their reactions to the letters they receive.…

On the Use of Writing Assignments in Intermediate Microeconomic Theory

Science.gov (United States)

O'Neill, Patrick B.

2009-01-01

A typical writing assignment in upper level required courses is a term paper. However many economics majors, particularly those in business schools, need to develop skill at writing shorter pieces. In this paper I describe numerous examples of shorter writing assignments that I have incorporated into an Intermediate Microeconomic Theory course.…

Probabilistic validation of protein NMR chemical shift assignments

International Nuclear Information System (INIS)

Dashti, Hesam; Tonelli, Marco; Lee, Woonghee; Westler, William M.; Cornilescu, Gabriel; Ulrich, Eldon L.; Markley, John L.

2016-01-01

Data validation plays an important role in ensuring the reliability and reproducibility of studies. NMR investigations of the functional properties, dynamics, chemical kinetics, and structures of proteins depend critically on the correctness of chemical shift assignments. We present a novel probabilistic method named ARECA for validating chemical shift assignments that relies on the nuclear Overhauser effect data. ARECA has been evaluated through its application to 26 case studies and has been shown to be complementary to, and usually more reliable than, approaches based on chemical shift databases. ARECA is available online at http://areca.nmrfam.wisc.edu/ http://areca.nmrfam.wisc.edu/

Probabilistic validation of protein NMR chemical shift assignments

Energy Technology Data Exchange (ETDEWEB)

Dashti, Hesam [University of Wisconsin-Madison, Graduate Program in Biophysics, Biochemistry Department (United States); Tonelli, Marco; Lee, Woonghee; Westler, William M.; Cornilescu, Gabriel [University of Wisconsin-Madison, Biochemistry Department, National Magnetic Resonance Facility at Madison (United States); Ulrich, Eldon L. [University of Wisconsin-Madison, BioMagResBank, Biochemistry Department (United States); Markley, John L., E-mail: markley@nmrfam.wisc.edu, E-mail: jmarkley@wisc.edu [University of Wisconsin-Madison, Biochemistry Department, National Magnetic Resonance Facility at Madison (United States)

2016-01-15

Data validation plays an important role in ensuring the reliability and reproducibility of studies. NMR investigations of the functional properties, dynamics, chemical kinetics, and structures of proteins depend critically on the correctness of chemical shift assignments. We present a novel probabilistic method named ARECA for validating chemical shift assignments that relies on the nuclear Overhauser effect data. ARECA has been evaluated through its application to 26 case studies and has been shown to be complementary to, and usually more reliable than, approaches based on chemical shift databases. ARECA is available online at http://areca.nmrfam.wisc.edu/ http://areca.nmrfam.wisc.edu/.

Complete NMR assignment of a bisecting hybrid-type oligosaccharide transferred by Mucor hiemalis endo-β-N-acetylglucosaminidase.

Science.gov (United States)

Yamanoi, Takashi; Oda, Yoshiki; Katsuraya, Kaname; Inazu, Toshiyuki; Yamamoto, Kenji

2016-06-02

This study describes the complete nuclear magnetic resonance (NMR) spectral assignment of a bisecting hybrid-type oligosaccharide 1, transferred by Mucor hiemalis endo-β-N-acetylglucosaminidase (Endo-M). Through (1)H- and (13)C-NMR, DQF-COSY, HSQC, HMBC, TOCSY, and NOESY experiments, we determine the structure of the glycoside linkage formed by the Endo-M transglycosylation, i.e., the connection between GlcNAc and GlcNAc in oligosaccharide 1. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimal Processor Assignment for Pipeline Computations

Science.gov (United States)

1991-10-01

the use of ratios: initially each task is assigned a procesbuor2 the remaining proceborb are distributed in proportion to the quantities f,(1), 1 < i...algorithmns. IEEE Trans. onl Parallel and Distributed Systemns, 1 (4):470-499, October 1990. [26] P. Al. Kogge. The Architeture of Pipelined Comnputers

7 CFR 1437.104 - Assigned production.

Science.gov (United States)

2010-01-01

...) Irrigation equipment is not capable of supplying adequate water to sustain the expected production of a... practice is not used. (7) For normal irrigated annual and biennial crops, the supply of available water at... determining losses under this section, assigned production will be used to offset the loss of production when...

41 CFR 102-79.20 - What standard must Executive agencies promote when assigning space?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What standard must Executive agencies promote when assigning space? 102-79.20 Section 102-79.20 Public Contracts and Property... PROPERTY 79-ASSIGNMENT AND UTILIZATION OF SPACE Assignment and Utilization of Space Assignment of Space...

Assigning Main Orientation to an EOH Descriptor on Multispectral Images

Directory of Open Access Journals (Sweden)

Yong Li

2015-07-01

Full Text Available This paper proposes an approach to compute an EOH (edge-oriented histogram descriptor with main orientation. EOH has a better matching ability than SIFT (scale-invariant feature transform on multispectral images, but does not assign a main orientation to keypoints. Alternatively, it tends to assign the same main orientation to every keypoint, e.g., zero degrees. This limits EOH to matching keypoints between images of translation misalignment only. Observing this limitation, we propose assigning to keypoints the main orientation that is computed with PIIFD (partial intensity invariant feature descriptor. In the proposed method, SIFT keypoints are detected from images as the extrema of difference of Gaussians, and every keypoint is assigned to the main orientation computed with PIIFD. Then, EOH is computed for every keypoint with respect to its main orientation. In addition, an implementation variant is proposed for fast computation of the EOH descriptor. Experimental results show that the proposed approach performs more robustly than the original EOH on image pairs that have a rotation misalignment.

46 CFR 42.05-10 - Assigning authority.

Science.gov (United States)

2010-10-01

... Definition of Terms Used in This Subchapter § 42.05-10 Assigning authority. This term means the “American Bureau of Shipping” or such other recognized classification society which the Commandant may approve as...

Automation of block assignment planning using a diagram-based scenario modeling method

Directory of Open Access Journals (Sweden)

In Hyuck Hwang

2014-03-01

Full Text Available Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is because the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manually by experienced workers. In this study, a method of representing the block assignment rules using a diagram was suggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

Automation of block assignment planning using a diagram-based scenario modeling method

Directory of Open Access Journals (Sweden)

Hwang In Hyuck

2014-03-01

Full Text Available Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is be¬cause the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manu¬ally by experienced workers. In this study, a method of representing the block assignment rules using a diagram was su¬ggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

Effect of the assignment of ancestral CpG state on the estimation of nucleotide substitution rates in mammals

Directory of Open Access Journals (Sweden)

Keightley Peter D

2008-09-01

Full Text Available Abstract Background Molecular evolutionary studies in mammals often estimate nucleotide substitution rates within and outside CpG dinucleotides separately. Frequently, in alignments of two sequences, the division of sites into CpG and non-CpG classes is based simply on the presence or absence of a CpG dinucleotide in either sequence, a procedure that we refer to as CpG/non-CpG assignment. Although it likely that this procedure is biased, it is generally assumed that the bias is negligible if species are very closely related. Results Using simulations of DNA sequence evolution we show that assignment of the ancestral CpG state based on the simple presence/absence of the CpG dinucleotide can seriously bias estimates of the substitution rate, because many true non-CpG changes are misassigned as CpG. Paradoxically, this bias is most severe between closely related species, because a minimum of two substitutions are required to misassign a true ancestral CpG site as non-CpG whereas only a single substitution is required to misassign a true ancestral non-CpG site as CpG in a two branch tree. We also show that CpG misassignment bias differentially affects fourfold degenerate and noncoding sites due to differences in base composition such that fourfold degenerate sites can appear to be evolving more slowly than noncoding sites. We demonstrate that the effects predicted by our simulations occur in a real evolutionary setting by comparing substitution rates estimated from human-chimp coding and intronic sequence using CpG/non-CpG assignment with estimates derived from a method that is largely free from bias. Conclusion Our study demonstrates that a common method of assigning sites into CpG and non CpG classes in pairwise alignments is seriously biased and recommends against the adoption of ad hoc methods of ancestral state assignment.

NETWORK CODING BY BEAM FORMING

DEFF Research Database (Denmark)

2013-01-01

Network coding by beam forming in networks, for example, in single frequency networks, can provide aid in increasing spectral efficiency. When network coding by beam forming and user cooperation are combined, spectral efficiency gains may be achieved. According to certain embodiments, a method...... cooperating with the plurality of user equipment to decode the received data....

An Accurate and Impartial Expert Assignment Method for Scientific Project Review

Directory of Open Access Journals (Sweden)

Mingliang Yue

2017-12-01

Full Text Available Purpose: This paper proposes an expert assignment method for scientific project review that considers both accuracy and impartiality. As impartial and accurate peer review is extremely important to ensure the quality and feasibility of scientific projects, enhanced methods for managing the process are needed. Design/methodology/approach: To ensure both accuracy and impartiality, we design four criteria, the reviewers’ fitness degree, research intensity, academic association, and potential conflict of interest, to express the characteristics of an appropriate peer review expert. We first formalize the expert assignment problem as an optimization problem based on the designed criteria, and then propose a randomized algorithm to solve the expert assignment problem of identifying reviewer adequacy. Findings: Simulation results show that the proposed method is quite accurate and impartial during expert assignment. Research limitations: Although the criteria used in this paper can properly show the characteristics of a good and appropriate peer review expert, more criteria/conditions can be included in the proposed scheme to further enhance accuracy and impartiality of the expert assignment. Practical implications: The proposed method can help project funding agencies (e.g. the National Natural Science Foundation of China find better experts for project peer review. Originality/value: To the authors’ knowledge, this is the first publication that proposes an algorithm that applies an impartial approach to the project review expert assignment process. The simulation results show the effectiveness of the proposed method.

Charge-symmetry-breaking nucleon form factors

International Nuclear Information System (INIS)

Kubis, Bastian

2011-01-01

A quantitative understanding of charge-symmetry breaking is an increasingly important ingredient for the extraction of the nucleon’s strange vector form factors. We review the theoretical understanding of the charge-symmetry-breaking form factors, both for single nucleons and for 4 He.

A Web Support System for Submission and Handling of Programming Assignments

DEFF Research Database (Denmark)

Nørmark, Kurt

2011-01-01

Individual submission of programming assignments should be considered in all introductory programming courses. We describe a custom web support system for submission and management of programming assignments in an introductory C programming course. Experience from the first time use of the system...... is reported. In addition, we compare the pattern of use with the results of the final exam in order to reveal a possible impact of the programming assignments. We summarize the lessons learned in preparation for improving the system prior to the next round of use in the fall of 2011....

PECULIARITIES OF ASSIGNMENT OF ROLLING BEARING MOUNTING AND PARAMETERS OF GEOMETRIC ACCURACY OF MOUNTING SURFACES OF SHAFTS AND FRAMES

Directory of Open Access Journals (Sweden)

Adamenko Yu. І.

2017-04-01

Full Text Available The standards and methods concerning assignment of rolling bearing fit with shafts and frames via example of bearing 6-208 are analyzed. We set certain differences of recommendations according to GOST 3325-85, "Rolling bearings. Tolerance zones and technical requirements to mounting surfaces of shafts and frames. Attachment" and by reference of rolling bearing manufacturers. The following factors should be taken into consideration when assigning the mounting with the tension the internal ring of the bearing with shaft and mounting with a gap in the outer ring with a housing bore. The methods of achieving accuracy of mounting surfaces of shafts and frames via form tolerance assignment: roundness tolerance, profile of longitudinal cut, cross section, cylindricity and others. It is possible to limit the bearing rings in different ways, for example appointing the cylindrical mounting surfaces and bead end surfaces the appropriate tolerances, namely: coaxiality tolerance or full radial beat of mounting surfaces, and also perpendicularity tolerance, butt beats and full butt beats of mounting end surfaces. We suggest to expand methods of achieving the accuracy of shafts and frames depending on seriation of production and production operations metrology support.

Single-parent family forms and children's educational performance in a comparative perspective: Effects of school's share of single-parent families

NARCIS (Netherlands)

Lange, M. de; Dronkers, J.A.; Wolbers, M.H.J.

2014-01-01

Living in a single-parent family is negatively related with children's educational performance compared to living with 2 biological parents. In this article, we aim to find out to what extent the context of the school's share of single-parent families affects this negative relationship. We use

Assigned experts with competitive goals withhold information in group decision making

NARCIS (Netherlands)

Toma, C.; Vasiljevic, D.; Oberlé, D.; Butera, F.

2013-01-01

Expertise assignment has been proposed to improve unshared information pooling in group decision making. The current research revises this view by hypothesizing that expertise assignment is beneficial when group members have cooperative goals, but is detrimental when group members have competitive

The significance of socially-assigned ethnicity for self-identified Māori accessing and engaging with primary healthcare in New Zealand.

Science.gov (United States)

Reid, Jennifer; Cormack, Donna; Crowe, Marie

2016-03-01

Despite increased focus in New Zealand on reducing health inequities between Māori and New Zealand European ethnic groups, research on barriers and facilitators to primary healthcare access for Māori remains limited. In particular, there has been little interrogation of the significance of social-assignment of ethnicity for Māori in relation to engagement with predominantly non-Māori primary healthcare services and providers. A qualitative study was undertaken with a subsample (n = 40) of the broader Hauora Manawa Study to examine experiences of accessing and engaging with primary healthcare among adult urban Māori. Thematic analysis of in-depth interviews identified that participants perceived social-assignment as New Zealand European as an efficacious form of capital when interacting with predominantly non-Māori health professionals. Skin colour that was 'white' or was perceived to identify Māori as belonging to the 'dominant' New Zealand European ethnic group was reported as broadly advantageous and protective. In contrast, social-assignment as Māori was seen to be associated with risk of exposure to differential and discriminatory healthcare. Reducing the negative impacts of racialisation in a (neo)colonial society where 'White' cultural capital dominates requires increased recognition of the health-protective advantages of 'White' privilege and concomitant risks associated with socially-assigned categorisation of ethnicity as non-'White'. © The Author(s) 2015.

Assignment methodology for larger RNA oligonucleotides: Application to an ATP-binding RNA aptamer

International Nuclear Information System (INIS)

Dieckmann, Thorsten; Feigon, Juli

1997-01-01

The use of uniform 13C, 15N labeling in the NMR spectroscopic study of RNA structures has greatly facilitated the assignment process in small RNA oligonucleotides. For ribose spinsystem assignments, exploitation of these labels has followed previously developed methods for the study of proteins. However, for sequential assignment of the exchangeable and nonexchangeable protons of the nucleotides, it has been necessary to develop a variety of new NMR experiments. Even these are of limited utility in the unambiguous assignment of larger RNAs due to the short carbon relaxation times and extensive spectral overlap for all nuclei.These problems can largely be overcome by the additional use of base-type selectively 13C, 15N-labeled RNA in combination with a judicious use of related RNAs with base substitutions. We report the application of this approach to a 36-nucleotide ATP-binding RNA aptamer in complex with AMP. Complete sequential 1H assignments, as well as the majority of 13C and 15N assignments, were obtained

AUTOBA: automation of backbone assignment from HN(C)N suite of experiments.

Science.gov (United States)

Borkar, Aditi; Kumar, Dinesh; Hosur, Ramakrishna V

2011-07-01

Development of efficient strategies and automation represent important milestones of progress in rapid structure determination efforts in proteomics research. In this context, we present here an efficient algorithm named as AUTOBA (Automatic Backbone Assignment) designed to automate the assignment protocol based on HN(C)N suite of experiments. Depending upon the spectral dispersion, the user can record 2D or 3D versions of the experiments for assignment. The algorithm uses as inputs: (i) protein primary sequence and (ii) peak-lists from user defined HN(C)N suite of experiments. In the end, one gets H(N), (15)N, C(α) and C' assignments (in common BMRB format) for the individual residues along the polypeptide chain. The success of the algorithm has been demonstrated, not only with experimental spectra recorded on two small globular proteins: ubiquitin (76 aa) and M-crystallin (85 aa), but also with simulated spectra of 27 other proteins using assignment data from the BMRB.

Charge-symmetry-breaking nucleon form factors

Energy Technology Data Exchange (ETDEWEB)

Kubis, Bastian, E-mail: kubis@hiskp.uni-bonn.de [Universitaet Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik (Theorie) and Bethe Center for Theoretical Physics (Germany)

2011-11-15

A quantitative understanding of charge-symmetry breaking is an increasingly important ingredient for the extraction of the nucleon's strange vector form factors. We review the theoretical understanding of the charge-symmetry-breaking form factors, both for single nucleons and for {sup 4}He.

Drosophila egghead encodes a beta 1,4-mannosyltransferase predicted to form the immediate precursor glycosphingolipid substrate for brainiac

DEFF Research Database (Denmark)

Wandall, Hans H; Pedersen, Johannes W; Park, Chaeho

2002-01-01

-N-acetylglucosamine:beta Man beta 1,3-N-acetylglucosaminyltransferase (beta 3GlcNAc-transferase) tentatively assigned a key role in biosynthesis of arthroseries glycosphingolipids and forming the trihexosylceramide, GlcNAc beta 1-3Man beta 1-4Glc beta 1-1Cer. In the present study we demonstrate that egghead encodes a Golgi......-located GDP-mannose:beta Glc beta 1,4-mannosyltransferase tentatively assigned a biosynthetic role to form the precursor arthroseries glycosphingolipid substrate for Brainiac, Man beta 1-4Glc beta 1-1Cer. Egghead is unique among eukaryotic glycosyltransferase genes in that homologous genes are limited...

Practical aspects of NMR signal assignment in larger and challenging proteins

Science.gov (United States)

Frueh, Dominique P.

2014-01-01

NMR has matured into a technique routinely employed for studying proteins in near physiological conditions. However, applications to larger proteins are impeded by the complexity of the various correlation maps necessary to assign NMR signals. This article reviews the data analysis techniques traditionally employed for resonance assignment and describes alternative protocols necessary for overcoming challenges in large protein spectra. In particular, simultaneous analysis of multiple spectra may help overcome ambiguities or may reveal correlations in an indirect manner. Similarly, visualization of orthogonal planes in a multidimensional spectrum can provide alternative assignment procedures. We describe examples of such strategies for assignment of backbone, methyl, and nOe resonances. We describe experimental aspects of data acquisition for the related experiments and provide guidelines for preliminary studies. Focus is placed on large folded monomeric proteins and examples are provided for 37, 48, 53, and 81 kDa proteins. PMID:24534088

10 CFR Appendix A to Part 20 - Assigned Protection Factors for Respirators a

Science.gov (United States)

2010-01-01

... internal dose due to inhalation may, in addition, present external exposure hazards at higher... 10 Energy 1 2010-01-01 2010-01-01 false Assigned Protection Factors for Respirators a A Appendix A..., App. A Appendix A to Part 20—Assigned Protection Factors for Respirators a Operating mode Assigned...

Optimisation of timetable-based, stochastic transit assignment models based on MSA

DEFF Research Database (Denmark)

Nielsen, Otto Anker; Frederiksen, Rasmus Dyhr

2006-01-01

(CRM), such a large-scale transit assignment model was developed and estimated. The Stochastic User Equilibrium problem was solved by the Method of Successive Averages (MSA). However, the model suffered from very large calculation times. The paper focuses on how to optimise transit assignment models...

48 CFR 832.805-70 - Distribution/notification of assignment of claims.

Science.gov (United States)

2010-10-01

... assignment of payments for contracts under which payment for articles and services is certified and approved... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Distribution/notification... DEPARTMENT OF VETERANS AFFAIRS GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Assignment of Claims 832...

Danish Public Construction Counselling Selection and Assignment Criteria in European Tendering

DEFF Research Database (Denmark)

Larsen, Jesper Kranker; Ussing, Lene Faber; Brunø, Thomas Ditlev

2014-01-01

One of the largest customers in the Danish construction industry is public agencies that own and develop projects. For some of the counselling services, they recur to be put out in European tendering. The aim is to find which selection and assignment criteria are used most in public tendering. How...... projects use selection and assignment criteria for counselling services and finally if there is significant use of selection and assignment methods in public counselling. The method is based on 74 public counselling tenders from the European Tenders Electronic Daily database from January 2010 to March 2013...

Single-Parent Family Forms and Children's Educational Performance in a Comparative Perspective: Effects of School's Share of Single-Parent Families

Science.gov (United States)

de Lange, Marloes; Dronkers, Jaap; Wolbers, Maarten H. J.

2014-01-01

Living in a single-parent family is negatively related with children's educational performance compared to living with 2 biological parents. In this article, we aim to find out to what extent the context of the school's share of single-parent families affects this negative relationship. We use pooled data from the Organisation for Economic…

Controversies of Sex Re-assignment in Genetic Males with Congenital Inadequacy of the Penis.

Science.gov (United States)

Raveenthiran, Venkatachalam

2017-09-01

Sex assignment in 46XY genetic male children with congenital inadequacy of the penis (CIP) is controversial. Traditionally, children with penile length less than 2 cm at birth are considered unsuitable to be raised as males. They are typically re-assigned to female-sex and feminizing genitoplasty is usually done in infancy. However, the concept of cerebral androgen imprinting has caused paradigm shift in the philosophy of sex re-assignment. Masculinization of the brain, rather than length of the penis, is the modern criterion of sex re-assignment in CIP. This review summarizes the current understanding of the complex issue. In 46XY children with CIP, male-sex assignment appears appropriate in non-hormonal conditions such as idiopathic micropenis, aphallia and exstrophy. Female-sex re-assignment appears acceptable in complete androgen insensitivity (CAIS), while partial androgen insensitivity syndrome (PAIS) patients are highly dissatisfied with the assignment of either sex. Children with 5-alpha reductase deficiency are likely to have spontaneous penile lengthening at puberty. Hence, they are better raised as males. Although female assignment is common in pure gonadal dysgenesis, long-term results are not known to justify the decision.

Work assignments, delegation of tasks and job satisfaction among Danish dental hygienists.

Science.gov (United States)

Hach, M; Aaberg, K B; Lempert, S M; Danielsen, B

2017-08-01

Recent legislation in Denmark has made it possible for dentists to delegate their tasks to dental hygienists. Previous studies have shown that Danish dental hygienists primarily were performing assignments within their own work field. These assignments include prophylaxis or instructing patients in oral health care. However, studies have also shown that Danish dental hygienists performed dental nurse assignments such as chair-side assistance, unit cleaning and disinfection of instruments. The objectives of this study were to investigate (i) the range of work assignments performed by Danish dental hygienists, (ii) the types of dentist tasks performed by Danish dental hygienists and (iii) job satisfaction among Danish dental hygienists. Dental hygienists graduating in 2004-2007 were invited to participate in this study. Participants answered an email-distributed questionnaire. The questionnaire consisted of questions regarding job satisfaction, assignments performed, postgraduate course attendance, receiving assistance from a dental nurse and which work assignments Danish dental hygienists wish to perform in the future. The results of this study showed that 90% of Danish dental hygienists were satisfied with their job and 52% were performing dentists' tasks. Among dentists' tasks performed by Danish dental hygienists, invasive caries therapy was the most frequently performed task. The type of assignments performed by Danish dental hygienists today appears to be changing compared to previous studies. From initially performing prophylaxis and chair-side assistance for the dentist, Danish dental hygienists today are performing a wider range of tasks which includes dentists' tasks. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Robust high-precision attitude control for flexible spacecraft with improved mixed H2/H∞ control strategy under poles assignment constraint

Science.gov (United States)

Liu, Chuang; Ye, Dong; Shi, Keke; Sun, Zhaowei

2017-07-01

A novel improved mixed H2/H∞ control technique combined with poles assignment theory is presented to achieve attitude stabilization and vibration suppression simultaneously for flexible spacecraft in this paper. The flexible spacecraft dynamics system is described and transformed into corresponding state space form. Based on linear matrix inequalities (LMIs) scheme and poles assignment theory, the improved mixed H2/H∞ controller does not restrict the equivalence of the two Lyapunov variables involved in H2 and H∞ performance, which can reduce conservatives compared with traditional mixed H2/H∞ controller. Moreover, it can eliminate the coupling of Lyapunov matrix variables and system matrices by introducing slack variable that provides additional degree of freedom. Several simulations are performed to demonstrate the effectiveness and feasibility of the proposed method in this paper.

Model morphing and sequence assignment after molecular replacement.

Science.gov (United States)

Terwilliger, Thomas C; Read, Randy J; Adams, Paul D; Brunger, Axel T; Afonine, Pavel V; Hung, Li-Wei

2013-11-01

A procedure termed `morphing' for improving a model after it has been placed in the crystallographic cell by molecular replacement has recently been developed. Morphing consists of applying a smooth deformation to a model to make it match an electron-density map more closely. Morphing does not change the identities of the residues in the chain, only their coordinates. Consequently, if the true structure differs from the working model by containing different residues, these differences cannot be corrected by morphing. Here, a procedure that helps to address this limitation is described. The goal of the procedure is to obtain a relatively complete model that has accurate main-chain atomic positions and residues that are correctly assigned to the sequence. Residues in a morphed model that do not match the electron-density map are removed. Each segment of the resulting trimmed morphed model is then assigned to the sequence of the molecule using information about the connectivity of the chains from the working model and from connections that can be identified from the electron-density map. The procedure was tested by application to a recently determined structure at a resolution of 3.2 Å and was found to increase the number of correctly identified residues in this structure from the 88 obtained using phenix.resolve sequence assignment alone (Terwilliger, 2003) to 247 of a possible 359. Additionally, the procedure was tested by application to a series of templates with sequence identities to a target structure ranging between 7 and 36%. The mean fraction of correctly identified residues in these cases was increased from 33% using phenix.resolve sequence assignment to 47% using the current procedure. The procedure is simple to apply and is available in the Phenix software package.

Disentangling Mathematics Target and Access Skills: Implications for Accommodation Assignment Practices

Science.gov (United States)

Ketterlin-Geller, Leanne R.; Jamgochian, Elisa M.; Nelson-Walker, Nancy J.; Geller, Joshua P.

2012-01-01

Appropriate assignment of accommodations is predicated on a clear distinction between target skills and access skills. In this study, we examine the agreement between test developer/researchers' and educators' classification of target and access skills as a possible explanatory mechanism for assigning accommodations. Findings indicate that…

Written Assignments for Abnormal Psychology at Howard Community College, Fall 1988.

Science.gov (United States)

Bell, James

Designed for students enrolled in an Abnormal Psychology course at Howard Community College (Maryland), this booklet explains the requirements for the course's writing assignments, which are designed to teach the skills of comparison and contrast, analysis, critical thinking, and synthesis. Following an overview of class assignments and…

Improving Students’ Learning in Software Engineering Education through Multi-Level Assignments

NARCIS (Netherlands)

Dr. Leo Pruijt; Christian Köppe

2014-01-01

Author supplied: DOI : http://dx.doi.org/10.1145/2691352.2691357 Assignments and exercises are an essential part of software engineering education. It usually requires a variety of these assignments to cover a desired wide range of educational objectives as defined in the revised Bloom's taxonomy.

Easy and unambiguous sequential assignments of intrinsically disordered proteins by correlating the backbone 15N or 13C′ chemical shifts of multiple contiguous residues in highly resolved 3D spectra

International Nuclear Information System (INIS)

Yoshimura, Yuichi; Kulminskaya, Natalia V.; Mulder, Frans A. A.

2015-01-01

Sequential resonance assignment strategies are typically based on matching one or two chemical shifts of adjacent residues. However, resonance overlap often leads to ambiguity in resonance assignments in particular for intrinsically disordered proteins. We investigated the potential of establishing connectivity through the three-bond couplings between sequentially adjoining backbone carbonyl carbon nuclei, combined with semi-constant time chemical shift evolution, for resonance assignments of small folded and larger unfolded proteins. Extended sequential connectivity strongly lifts chemical shift degeneracy of the backbone nuclei in disordered proteins. We show here that 3D (H)N(COCO)NH and (HN)CO(CO)NH experiments with relaxation-optimized multiple pulse mixing correlate up to seven adjacent backbone amide nitrogen or carbonyl carbon nuclei, respectively, and connections across proline residues are also obtained straightforwardly. Multiple, recurrent long-range correlations with ultra-high resolution allow backbone 1 H N , 15 N H , and 13 C′ resonance assignments to be completed from a single pair of 3D experiments

A Statistical Programme Assignment Model

DEFF Research Database (Denmark)

Rosholm, Michael; Staghøj, Jonas; Svarer, Michael

When treatment effects of active labour market programmes are heterogeneous in an observable way  across the population, the allocation of the unemployed into different programmes becomes a particularly  important issue. In this paper, we present a statistical model designed to improve the present...... duration of unemployment spells may result if a statistical programme assignment model is introduced. We discuss several issues regarding the  plementation of such a system, especially the interplay between the statistical model and  case workers....

Integrated project scheduling and staff assignment with controllable processing times.

Science.gov (United States)

Fernandez-Viagas, Victor; Framinan, Jose M

2014-01-01

This paper addresses a decision problem related to simultaneously scheduling the tasks in a project and assigning the staff to these tasks, taking into account that a task can be performed only by employees with certain skills, and that the length of each task depends on the number of employees assigned. This type of problems usually appears in service companies, where both tasks scheduling and staff assignment are closely related. An integer programming model for the problem is proposed, together with some extensions to cope with different situations. Additionally, the advantages of the controllable processing times approach are compared with the fixed processing times. Due to the complexity of the integrated model, a simple GRASP algorithm is implemented in order to obtain good, approximate solutions in short computation times.

Integrated Project Scheduling and Staff Assignment with Controllable Processing Times

Directory of Open Access Journals (Sweden)

Victor Fernandez-Viagas

2014-01-01

Full Text Available This paper addresses a decision problem related to simultaneously scheduling the tasks in a project and assigning the staff to these tasks, taking into account that a task can be performed only by employees with certain skills, and that the length of each task depends on the number of employees assigned. This type of problems usually appears in service companies, where both tasks scheduling and staff assignment are closely related. An integer programming model for the problem is proposed, together with some extensions to cope with different situations. Additionally, the advantages of the controllable processing times approach are compared with the fixed processing times. Due to the complexity of the integrated model, a simple GRASP algorithm is implemented in order to obtain good, approximate solutions in short computation times.

The Automatic Sweetheart: An Assignment in a History of Psychology Course

Science.gov (United States)

Sibicky, Mark E.

2007-01-01

This article describes an assignment in a History of Psychology course used to enhance student retention of material and increase student interest and discussion of the long-standing debate between humanistic and mechanistic models in psychology. Adapted from William James's (1955) automatic sweetheart question, the assignment asks students to…

Quality Assurance of UMLS Semantic Type Assignments Using SNOMED CT Hierarchies.

Science.gov (United States)

Gu, H; Chen, Y; He, Z; Halper, M; Chen, L

2016-01-01

The Unified Medical Language System (UMLS) is one of the largest biomedical terminological systems, with over 2.5 million concepts in its Metathesaurus repository. The UMLS's Semantic Network (SN) with its collection of 133 high-level semantic types serves as an abstraction layer on top of the Metathesaurus. In particular, the SN elaborates an aspect of the Metathesaurus's concepts via the assignment of one or more types to each concept. Due to the scope and complexity of the Metathesaurus, errors are all but inevitable in this semantic-type assignment process. To develop a semi-automated methodology to help assure the quality of semantic-type assignments within the UMLS. The methodology uses a cross-validation strategy involving SNOMED CT's hierarchies in combination with UMLS semantic types. Semantically uniform, disjoint concept groups are generated programmatically by partitioning the collection of all concepts in the same SNOMED CT hierarchy according to their respective semantic-type assignments in the UMLS. Domain experts are then called upon to review the concepts in any group having a small number of concepts. It is our hypothesis that a semantic-type assignment combination applicable only to a very small number of concepts in a SNOMED CT hierarchy is an indicator of potential problems. The methodology was applied to the UMLS 2013AA release along with the SNOMED CT from January 2013. An overall error rate of 33% was found for concepts proposed by the quality-assurance methodology. Supporting our hypothesis, that number was four times higher than the error rate found in control samples. The results show that the quality-assurance methodology can aid in effective and efficient identification of UMLS semantic-type assignment errors.

ZAP: a distributed channel assignment algorithm for cognitive radio networks

OpenAIRE

Junior , Paulo Roberto ,; Fonseca , Mauro; Munaretto , Anelise; Viana , Aline ,; Ziviani , Artur

2011-01-01

Abstract We propose ZAP, an algorithm for the distributed channel assignment in cognitive radio (CR) networks. CRs are capable of identifying underutilized licensed bands of the spectrum, allowing their reuse by secondary users without interfering with primary users. In this context, efficient channel assignment is challenging as ideally it must be simple, incur acceptable communication overhead, provide timely response, and be adaptive to accommodate frequent changes in the network. Another ...

Relationship Structures and Semantic Type Assignments of the UMLS Enriched Semantic Network

Science.gov (United States)

Zhang, Li; Halper, Michael; Perl, Yehoshua; Geller, James; Cimino, James J.

2005-01-01

Objective: The Enriched Semantic Network (ESN) was introduced as an extension of the Unified Medical Language System (UMLS) Semantic Network (SN). Its multiple subsumption configuration and concomitant multiple inheritance make the ESN's relationship structures and semantic type assignments different from those of the SN. A technique for deriving the relationship structures of the ESN's semantic types and an automated technique for deriving the ESN's semantic type assignments from those of the SN are presented. Design: The technique to derive the ESN's relationship structures finds all newly inherited relationships in the ESN. All such relationships are audited for semantic validity, and the blocking mechanism is used to block invalid relationships. The mapping technique to derive the ESN's semantic type assignments uses current SN semantic type assignments and preserves nonredundant categorizations, while preventing new redundant categorizations. Results: Among the 426 newly inherited relationships, 326 are deemed valid. Seven blockings are applied to avoid inheritance of the 100 invalid relationships. Sixteen semantic types have different relationship structures in the ESN as compared to those in the SN. The mapping of semantic type assignments from the SN to the ESN avoids the generation of 26,950 redundant categorizations. The resulting ESN contains 138 semantic types, 149 IS-A links, 7,303 relationships, and 1,013,876 semantic type assignments. Conclusion: The ESN's multiple inheritance provides more complete relationship structures than in the SN. The ESN's semantic type assignments avoid the existing redundant categorizations appearing in the SN and prevent new ones that might arise due to multiple parents. Compared to the SN, the ESN provides a more accurate unifying semantic abstraction of the UMLS Metathesaurus. PMID:16049233

Auditing the Assignments of Top-Level Semantic Types in the UMLS Semantic Network to UMLS Concepts.

Science.gov (United States)

He, Zhe; Perl, Yehoshua; Elhanan, Gai; Chen, Yan; Geller, James; Bian, Jiang

2017-11-01

The Unified Medical Language System (UMLS) is an important terminological system. By the policy of its curators, each concept of the UMLS should be assigned the most specific Semantic Types (STs) in the UMLS Semantic Network (SN). Hence, the Semantic Types of most UMLS concepts are assigned at or near the bottom (leaves) of the UMLS Semantic Network. While most ST assignments are correct, some errors do occur. Therefore, Quality Assurance efforts of UMLS curators for ST assignments should concentrate on automatically detected sets of UMLS concepts with higher error rates than random sets. In this paper, we investigate the assignments of top-level semantic types in the UMLS semantic network to concepts, identify potential erroneous assignments, define four categories of errors, and thus provide assistance to curators of the UMLS to avoid these assignments errors. Human experts analyzed samples of concepts assigned 10 of the top-level semantic types and categorized the erroneous ST assignments into these four logical categories. Two thirds of the concepts assigned these 10 top-level semantic types are erroneous. Our results demonstrate that reviewing top-level semantic type assignments to concepts provides an effective way for UMLS quality assurance, comparing to reviewing a random selection of semantic type assignments.

My Favorite Assignment: From the ABC 2010 Annual Convention, Chicago, Illinois

Science.gov (United States)

Whalen, D. Joel

2011-01-01

The seven Favorite Assignments featured in this article were originally presented at the 2010 ABC Annual Convention, Chicago, Illinois. The reader can consider a variety of learning objectives from team building to persuasion, application of electronic media to face-to-face communication, and much more. Some Favorite Assignments take a full…

20 CFR 658.411 - Filing and assignment of JS-related complaints.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Filing and assignment of JS-related... Agency Js Complaint System § 658.411 Filing and assignment of JS-related complaints. (a) JS-related... office personnel shall be as follows: (1) All JS-related complaints filed with a local office, and...

42 CFR 424.73 - Prohibition of assignment of claims by providers.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Prohibition of assignment of claims by providers. 424.73 Section 424.73 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... and Reassignment of Claims § 424.73 Prohibition of assignment of claims by providers. (a) Basic...

76 FR 42706 - Amendment of Inspector General Operations & Reporting System Audit, Assignment, and Timesheet...

Science.gov (United States)

2011-07-19

... Operations & Reporting System Audit, Assignment, and Timesheet Files (EPA-42) AGENCY: Environmental... (IGOR) System Audit, Assignment, and Timesheet Files (EPA-42) to the Inspector General Enterprise Management System (IGEMS) Audit, Assignment, and Timesheet Modules. DATES: Effective Dates: Persons wishing...

Mobilities in ambipolar field effect transistors based on single-walled carbon nanotube network and formed on a gold nanoparticle template

Energy Technology Data Exchange (ETDEWEB)

Wongsaeng, Chalao [Department of Science, Faculty of Sciences and Agricultural Technology, Rajamangala University of Technology Lanna Tak, Tak 63000 (Thailand); Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Singjai, Pisith, E-mail: pisith.s@cmu.ac.th [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand)

2014-04-07

Ambipolar field effect transistors based on a single-walled carbon nanotube (SWNT) network formed on a gold nanoparticle (AuNP) template with polyvinyl alcohol as a gate insulator were studied by measuring the current–gate voltage characteristics. It was found that the mobilities of holes and electrons increased with increasing AuNP number density. The disturbances in the flow pattern of the carbon feedstock in the chemical vapor deposition growth that were produced by the AuNP geometry, resulted in the differences in the crystallinity and the diameter, as well as the changes in the degree of the semiconductor behavior of the SWNTs.

Concurrent Mass Measurement and Laser Spectroscopy for Unambiguous Isomeric State Assignment

Science.gov (United States)

Lascar, Daniel; Babcock, Carla; Henderson, Jack; Pearson, Matt

2017-09-01

Recent work by the TITAN group at TRIUMF on isomeric state mass measurements of odd-A, neutron-rich cadmium nuclei has shown a disconnect between experiment and theory in 127 g , mCd. The spin and parity assignments of the ground and isomeric states are assigned as 3/2+ and 11/2-, respectively, primarily via systematic arguments. Conversely, state of the art shell model and ab initio calculations show a reversal of the states, predicting a ground state of 11/2- and a 3/2+ isomer. Penning Trap Mass Spectrometry (PTMS) can measure the energy separation between the ground state and the isomer without ambiguity but cannot, on its own, comment on the spin and parity. Collinear Laser Spectroscopy (CLS) experiments have been performed on 127Cd and have elegantly demonstrated the existence of both 3/2+ and 11/2- states. What CLS cannot do, on its own, is assign an ordering to those states. If, however, a PTMS and CLS experiment could be performed concurrently using identical beams from the same facility then there exists sufficient information shared between both experiments that a definitive assignment can be made. We present a concept for a new slate of measurements using existing experimental facilities simultaneously, with shared resources, to definitively assign spin and parity for ground and isomeric states in short-lived nuclei.

Incentivized optimal advert assignment via utility decomposition

NARCIS (Netherlands)

Kelly, F.; Key, P.; Walton, N.

2014-01-01

We consider a large-scale Ad-auction where adverts are assigned over a potentially infinite number of searches. We capture the intrinsic asymmetries in information between advertisers, the advert platform and the space of searches: advertisers know and can optimize the average performance of their

9 CFR 355.10 - Assignment of inspectors.

Science.gov (United States)

2010-01-01

... INSPECTION AND CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Assignment of inspectors. 355.10 Section 355.10 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

A game theoretic approach to assignment problems

NARCIS (Netherlands)

Klijn, F.

2000-01-01

Game theory deals with the mathematical modeling and analysis of conflict and cooperation in the interaction of multiple decision makers. This thesis adopts two game theoretic methods to analyze a range of assignment problems that arise in various economic situations. The first method has as

Not Only Single Mating in Stingless Bees

Science.gov (United States)

Paxton, Robert J.; Weißschuh, Nicole; Engels, Wolf; Hartfelder, Klaus; Quezada-Euan, J. Javier G.

Queens of the large, pantropical and fully eusocial taxon Meliponinae (stingless bees) are generally considered to be singly mated. We indirectly estimated queen mating frequency in two meliponids, Melipona beecheii and Scaptotrigona postica, by examining genotypes of workers at microsatellite DNA loci. Microsatellites were highly variable, providing suitable markers with which to assign patrilinial origin of workers within colonies headed by single queens. Queen mating frequency varied between 1 and 3 (M. beecheii) and 1 and 6 (S. postica), representing the first clear documentation of polyandry in the Meliponinae. Effective paternity frequency, me, was lower, although above 2 for S. postica. Stingless bees may provide suitable subjects for the testing of recent inclusive fitness arguments describing intracolony kin conflict in social Hymenoptera.

Performance improvement of switched-based interference mitigation for channel assignment in over-loaded small-cell networks

KAUST Repository

Gaaloul, Fakhreddine

2013-05-01

This paper proposes adequate methods to improve the interference mitigation capability of a recently investigated switched-based interference reduction scheme for single downlink channel assignment in over-loaded small-cell networks. The model assumes that the available orthogonal channels for small cells are distributed among access points in close vicinity, where each access point knows its allocated channels a priori. Each cell has a single antenna, employs the open access strategy, and can reuse its allocated channels simultaneously, while scheduling concurrent service requests. Moreover, the access points can not coordinate their transmissions, and can receive limited feedback from active users. The paper presents low-complexity schemes to identify a suitable channel to serve the scheduled user by maintaining the interference power level within a tolerable range. They attempt to either complement the switched-based scheme by minimum interference channel selection or adopt different interference thresholds on available channels, while reducing the channel examination load. The optimal thresholds for interference mitigation at the desired receive station are quantified for various performance criteria. The performance and processing load of the proposed schemes are obtained analytically, and then compared to those of the single-threshold scheme via numerical and simulation results. © 2002-2012 IEEE.

Assignments of rights and obligations under a gas sales contract

International Nuclear Information System (INIS)

Kowch, J.R.M.

1996-01-01

A general overview of the principles of assignment in a gas sales contract was presented. Assignment is a process wherein the rights or obligations under a contract are transferred from one of the contracting parties to a third party. It is, in other words, the introduction of a new party to the original contractual relationship. Under the rights and obligations of a gas sales contract, the most important right of the seller is to have its gas taken and to be paid. Likewise, the most important obligation of the buyer is to take the gas and pay for it. An assignment by either party has the potential to alter the original expectations of the parties or the basis of which they committed to the contract in the first place. Prior to deregulation and unbundling initiatives, gas sellers and buyers could enter a 20 year sales contract and deal exclusively with each other over the entire 20 year term. Since deregulation, there are more players, and a higher level of corporate acquisitions, divestitures, rationalizations, and restructuring. Today, there are greater chances than ever before that the original party to a contract may change, or that certain rights and obligations may be assigned to a third party and affect the expectations under the contract

A career exploration assignment for first-year pharmacy students.

Science.gov (United States)

Sholy, Lydia; Zeenny, Rony

2013-11-12

To develop, implement, and assess student-learning outcomes from an assignment designed to expose first-year pharmacy students (P1) to a wide range of pharmacy career pathways. Students enrolled in a required Pharmacy Practice and Ethics course at the Lebanese American University chose 1 pharmacist career to investigate from a suggested list of 28 career pathways. Students completed a literature review on the selected career, interviewed a pharmacist practicing that career path in Lebanon, wrote a paper, and prepared and delivered a summary presentation to their classmates about the career pathway. Students peer evaluated their classmates after each presentation. More than 85% of the students scored ≥70% on the assignment based on their achievement of student learning outcomes. Responses on an anonymous questionnaire showed that more than 94.6% of students were satisfied with the extent to which the course allowed them to meet the established learning outcomes. A career exploration assignment provided pharmacy students with an opportunity to widen their knowledge and understanding of the different career pathways that are available for them.

Target assignment for security officers to K targets (TASK)

International Nuclear Information System (INIS)

Rowland, J.R.; Shelton, K.W.; Stunkel, C.B.

1983-02-01

A probabilistic algorithm is developed to provide an optimal Target Assignment for Security officers to K targets (TASK) using a maximin criterion. Under the assumption of only a limited number (N) of security officers, the TASK computer model determines deployment assignments which maximize the system protection against sabotage by an adversary who may select any link in the system, including the weakest, for the point of attack. Applying the TASK model to a hypothetical nuclear facility containing a nine-level building reveals that aggregate targets covering multiple vital areas should be utilized to reduce the number of possible target assignments to a value equal to or only slightly larger than N. The increased probability that a given aggregate target is covered by one or more security officers offsets the slight decrease in interruption probability due to its occurring earlier in the adversary's path. In brief, the TASK model determines the optimal maximin deployment strategy for limited numbers of security officers and calculates a quantitative measure of the resulting system protection

Evaluation of a Brief Homework Assignment Designed to Reduce Citation Problems

Science.gov (United States)

Schuetze, Pamela

2004-01-01

I evaluated a brief homework assignment designed to reduce citation problems in research-based term papers. Students in 2 developmental psychology classes received a brief presentation and handout defining plagiarism with tips on how to cite sources to avoid plagiarizing. In addition, students in 1 class completed 2 brief homework assignments in…

Integrating Graphing Assignments into a Money and Banking Course Using FRED

Science.gov (United States)

Staveley-O'Carroll, James

2018-01-01

Over the course of one semester, six empirical assignments that utilize FRED are used to introduce students of money and banking courses to the economic analysis required for the conduct of monetary policy. The first five assignments cover the following topics: inflation, bonds and stocks, monetary aggregates, the Taylor rule, and employment.…

Backbone resonance assignments for G protein α(i3) subunit in the GDP-bound state.

Science.gov (United States)

Mase, Yoko; Yokogawa, Mariko; Osawa, Masanori; Shimada, Ichio

2014-10-01

Guanine-nucleotide binding proteins (G proteins) serve as molecular switches in signaling pathways, by coupling the activation of G protein-coupled receptors (GPCRs) at the cell surface to intracellular responses. In the resting state, G protein forms a heterotrimer, consisting of the G protein α subunit with GDP (Gα·GDP) and the G protein βγ subunit (Gβγ). Ligand binding to GPCRs promotes the GDP-GTP exchange on Gα, leading to the dissociation of the GTP-bound form of Gα (Gα·GTP) and Gβγ. Then, Gα·GTP and Gβγ bind to their downstream effector enzymes or ion channels and regulate their activities, leading to a variety of cellular responses. Finally, Gα hydrolyzes the bound GTP to GDP and returns to the resting state by re-associating with Gβγ. The G proteins are classified with four major families based on the amino acid sequences of Gα: i/o, s, q/11, and 12/13. Here, we established the backbone resonance assignments of human Gαi3, a member of the i/o family with a molecular weight of 41 K, in complex with GDP. The chemical shifts were compared with those of Gα(i3) in complex with a GTP-analogue, GTPγS, which we recently reported, indicating that the residues with significant chemical shift differences are mostly consistent with the regions with the structural differences between the GDP- and GTPγS-bound states, as indicated in the crystal structures. The assignments of Gα(i3)·GDP would be useful for the analyses of the dynamics of Gα(i3) and its interactions with various target molecules.

A demand assignment control in international business satellite communications network

Science.gov (United States)

Nohara, Mitsuo; Takeuchi, Yoshio; Takahata, Fumio; Hirata, Yasuo

An experimental system is being developed for use in an international business satellite (IBS) communications network based on demand-assignment (DA) and TDMA techniques. This paper discusses its system design, in particular from the viewpoints of a network configuration, a DA control, and a satellite channel-assignment algorithm. A satellite channel configuration is also presented along with a tradeoff study on transmission rate, HPA output power, satellite resource efficiency, service quality, and so on.

An analysis of project selection and assignment criteria of Danish tenders in Europe

Directory of Open Access Journals (Sweden)

Jasper Kranker Larsen

2013-12-01

Full Text Available Public construction agencies are one of the largest developers within the Danish construction industry, where such agencies own and develop new public construction projects. Most of these projects are put out in European tender. This study analyses the selection and assignment criteria employed by these agencies in different types of public sector projects. Some of the objectives pursued by the study include the determination of 1/ the selection and assignment criteria mostly used in Danish public tenders 2/ how different types of projects use selection and assignment criteria in the bidding process, and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period: January 2010 to March 2013. Fisher's Exact Test was conducted to determine if there was any significant use of some selection and assignment criteria. The findings of the study showed that invited tenders with pre-qualification and lowest price in 69.8% of the tenders are the most used selection and assignment criteria, with little regard to project type.

Developing and Evaluating Clinical Written Assignment in Clinical Teaching for the Senior B.S. Nursing Students: An action research

Directory of Open Access Journals (Sweden)

Leila Valizadeh

2012-12-01

Full Text Available Introduction: In a four-year undergraduate level , the nursing students have to get prepared in the patients education, designing care plans, applying nursing processes and exercise the clinical decisions, in addition to learning practical skills. Therefore, multiple clinical teaching strategies in nursing must be applied. In this study the sheets for the mentioned fields were designed and used. Methods: In this action research in Tabriz University of Medical Sciences, 64 nursing senior students and related instructors participated. Clinical written assignment included the patient’s health condition sheet, tables showing the used medicines and the precautions, the clinical and paraclinical tests and the results, identifying the patient problems, designing and implementing care plan and writing nursing reports with SOAPIE method. The instructors’ viewpoints were achieved through the group discussions and their notes taken. The perceived competency of the students was obtained through a questionnaire. The qualitative data was analyzed by the content analysis and quantitative using SPSS. Results: Both the students and the instructors agreed with the clinical written assignment. The desired care competency of the students before and after assignment was statistically significant (p<0.05. According to the instructors, intervention was useful for the senior students who have passed the courses needed for completing and using the different parts of these forms. Conclusion: Since a need is always felt in the trends of the nursing clinical teaching, the researchers recommend the clinical written assignment and their application along with other strategies for senior nursing students in clinical teaching.

A compensation controller based on a regional pole-assignment method for AMD control systems with a time-varying delay

Science.gov (United States)

Li, Zuohua; Chen, Chaojun; Teng, Jun; Wang, Ying

2018-04-01

Active mass damper/driver (AMD) control system has been proposed as an effective tool for high-rise buildings to resist strong dynamic loads. However, such disadvantage as time-varying delay in AMD control systems impedes their application in practices. Time-varying delay, which has an effect on the performance and stability of single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems, is considered in the paper. In addition, a new time-delay compensation controller based on regional pole-assignment method is presented. To verify its effectiveness, the proposed method is applied to a numerical example of a ten-storey frame and an experiment of a single span four-storey steel frame. Both numerical and experimental results demonstrate that the proposed method can enhance the performances of an AMD control system with time-varying delays.

Fluidity models in ancient Greece and current practices of sex assignment.

Science.gov (United States)

Chen, Min-Jye; McCann-Crosby, Bonnie; Gunn, Sheila; Georgiadis, Paraskevi; Placencia, Frank; Mann, David; Axelrad, Marni; Karaviti, L P; McCullough, Laurence B

2017-06-01

Disorders of sexual differentiation such as androgen insensitivity and gonadal dysgenesis can involve an intrinsic fluidity at different levels, from the anatomical and biological to the social (gender) that must be considered in the context of social constraints. Sex assignment models based on George Engel's biopsychosocial aspects model of biology accept fluidity of gender as a central concept and therefore help establish expectations within the uncertainty of sex assignment and anticipate potential changes. The biology underlying the fluidity inherent to these disorders should be presented to parents at diagnosis, an approach that the gender medicine field should embrace as good practice. Greek mythology provides many accepted archetypes of change, and the ancient Greek appreciation of metamorphosis can be used as context with these patients. Our goal is to inform expertise and optimal approaches, knowing that this fluidity may eventually necessitate sex reassignment. Physicians should provide sex assignment education based on different components of sexual differentiation, prepare parents for future hormone-triggered changes in their children, and establish a sex-assignment algorithm. Copyright © 2017 Elsevier Inc. All rights reserved.

Edge-assignment and figure-ground segmentation in short-term visual matching.

Science.gov (United States)

Driver, J; Baylis, G C

1996-12-01

Eight experiments examined the role of edge-assignment in a contour matching task. Subjects judged whether the jagged vertical edge of a probe shape matched the jagged edge that divided two adjoining shapes in an immediately preceding figure-ground display. Segmentation factors biased assignment of this dividing edge toward a figural shape on just one of its sides. Subjects were faster and more accurate at matching when the probe edge had a corresponding assignment. The rapid emergence of this effect provides an on-line analog of the long-term memory advantage for figures over grounds which Rubin (1915/1958) reported. The present on-line advantage was found when figures were defined by relative contrast and size, or by symmetry, and could not be explained solely by the automatic drawing of attention toward the location of the figural region. However, deliberate attention to one region of an otherwise ambiguous figure-ground display did produce the advantage. We propose that one-sided assignment of dividing edges may be obligatory in vision.

Fluidity models in ancient Greece and current practices of sex assignment

Science.gov (United States)

Chen, Min-Jye; McCann-Crosby, Bonnie; Gunn, Sheila; Georgiadis, Paraskevi; Placencia, Frank; Mann, David; Axelrad, Marni; Karaviti, L.P; McCullough, Laurence B.

2018-01-01

Disorders of sexual differentiation such as androgen insensitivity and gonadal dysgenesis can involve an intrinsic fluidity at different levels, from the anatomical and biological to the social (gender) that must be considered in the context of social constraints. Sex assignment models based on George Engel’s biopsychosocial aspects model of biology accept fluidity of gender as a central concept and therefore help establish expectations within the uncertainty of sex assignment and anticipate potential changes. The biology underlying the fluidity inherent to these disorders should be presented to parents at diagnosis, an approach that the gender medicine field should embrace as good practice. Greek mythology provides many accepted archetypes of change, and the ancient Greek appreciation of metamorphosis can be used as context with these patients. Our goal is to inform expertise and optimal approaches, knowing that this fluidity may eventually necessitate sex reassignment. Physicians should provide sex assignment education based on different components of sexual differentiation, prepare parents for future hormone-triggered changes in their children, and establish a sex-assignment algorithm. PMID:28478088

Assignment of stock keeping units to parallel undirectional picking

Directory of Open Access Journals (Sweden)

Matthews, Jason

2015-05-01

Full Text Available An order picking system consisting of a number of parallel unidirectional picking lines is investigated. Stock keeping units (SKUs that are grouped by product type into distributions (DBNs are assigned daily to available picking lines. A mathematical programming formulation and its relaxations is presented. A greedy insertion and a greedy phased insertion are further introduced to obtain feasible results within usable computation times for all test cases. The walking distance of the pickers was shown to decrease by about 22 per cent compared with the current assignment approach. However, product handling and operational risk increases.

Distributed Schemes for Crowdsourcing-Based Sensing Task Assignment in Cognitive Radio Networks

Directory of Open Access Journals (Sweden)

Linbo Zhai

2017-01-01

Full Text Available Spectrum sensing is an important issue in cognitive radio networks. The unlicensed users can access the licensed wireless spectrum only when the licensed wireless spectrum is sensed to be idle. Since mobile terminals such as smartphones and tablets are popular among people, spectrum sensing can be assigned to these mobile intelligent terminals, which is called crowdsourcing method. Based on the crowdsourcing method, this paper studies the distributed scheme to assign spectrum sensing task to mobile terminals such as smartphones and tablets. Considering the fact that mobile terminals’ positions may influence the sensing results, a precise sensing effect function is designed for the crowdsourcing-based sensing task assignment. We aim to maximize the sensing effect function and cast this optimization problem to address crowdsensing task assignment in cognitive radio networks. This problem is difficult to be solved because the complexity of this problem increases exponentially with the growth in mobile terminals. To assign crowdsensing task, we propose four distributed algorithms with different transition probabilities and use a Markov chain to analyze the approximation gap of our proposed schemes. Simulation results evaluate the average performance of our proposed algorithms and validate the algorithm’s convergence.

A New Approach to Weapon-Target Assignment in Cooperative Air Combat

Directory of Open Access Journals (Sweden)

Yi-zhe Chang

2017-01-01

Full Text Available A new approach to solving weapon-target assignment (WTA problem is proposed in this paper. Firstly, relative superiority that lays the foundation for assignment is calculated based on the combat power energy of the fighters. Based on the relative superiority, WTA problem is formulated. Afterwards, a hybrid algorithm consisting of improved artificial fish swarm algorithm (AFSA and improved harmony search (HS is introduced and furthermore applied to solve the assignment formulation. Finally, the proposed approach is validated by eight representative benchmark functions and two concrete cooperative air combat examples. The results show that the approach proposed in this paper achieves good performances in solving WTA problem in cooperative air combat.

Single Policy Study

DEFF Research Database (Denmark)

Kronsell, Annica; Manners, Ian James

2015-01-01

Single policy studies are the most common form of European Union (EU) research. Single policy studies are widely used to understand the role of the EU in a wide variety of sectors, together with their development over time, and often offer public policy prescriptions. This chapter discusses...... the relevance of single policy studies in EU research and give examples of how such research can be designed and carried out. The chapter reviews three examples of single policy studies using different methods based on EU environmental policy, the EU biofuels directive, and the EU Common Security and Defence...... Policy (CSDP). The examples are illustrative of how single policy studies can be designed to use different approaches in the analysis: multiple streams approach to policy-making; a comparative hypothesis testing; and feminist institutional theory....

Multi-channel distributed coordinated function over single radio in wireless sensor networks.

Science.gov (United States)

Campbell, Carlene E-A; Loo, Kok-Keong Jonathan; Gemikonakli, Orhan; Khan, Shafiullah; Singh, Dhananjay

2011-01-01

Multi-channel assignments are becoming the solution of choice to improve performance in single radio for wireless networks. Multi-channel allows wireless networks to assign different channels to different nodes in real-time transmission. In this paper, we propose a new approach, Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks (WSNs) over 802.11 networks. We presented simulation experiments in order to investigate the characteristics of multi-channel communication in wireless sensor networks using an NS2 platform. Nodes only use a single radio and perform channel switching only after specified threshold is reached. Single radio can only work on one channel at any given time. All nodes initiate constant bit rate streams towards the receiving nodes. In this work, we studied the impact of non-overlapping channels in the 2.4 frequency band on: constant bit rate (CBR) streams, node density, source nodes sending data directly to sink and signal strength by varying distances between the sensor nodes and operating frequencies of the radios with different data rates. We showed that multi-channel enhancement using our proposed algorithm provides significant improvement in terms of throughput, packet delivery ratio and delay. This technique can be considered for WSNs future use in 802.11 networks especially when the IEEE 802.11n becomes popular thereby may prevent the 802.15.4 network from operating effectively in the 2.4 GHz frequency band.

Amorphous drugs and dosage forms

DEFF Research Database (Denmark)

Grohganz, Holger; Löbmann, K.; Priemel, P.

2013-01-01

The transformation to an amorphous form is one of the most promising approaches to address the low solubility of drug compounds, the latter being an increasing challenge in the development of new drug candidates. However, amorphous forms are high energy solids and tend to recry stallize. New...... formulation principles are needed to ensure the stability of amorphous drug forms. The formation of solid dispersions is still the most investigated approach, but additional approaches are desirable to overcome the shortcomings of solid dispersions. Spatial separation by either coating or the use of micro-containers...... before single molecules are available for the formation of crystal nuclei, thus stabilizing the amorphous form....

FISCAL DECENTRALIZATION IN THE DRC: EVIDENCE OFREVENUE ASSIGNMENT

Directory of Open Access Journals (Sweden)

Angelita Kithatu-Kiwekete

2017-07-01

Full Text Available The rationalefor central government to devolve resources for service provisionhas been debated in decentralization literature. Decentralization enhancesdemocracy,encouragesparticipation in local development initiativesandpromotes local political accountability.This discourse has been complemented bythe implementation of fiscal decentralization to increase the ability of sub-nationalgovernment in financing municipal service delivery. Fiscal decentralization hasoften been adopted by African statessince the onset ofthe New PublicManagement erain an effortto improvethe standard ofgovernance. The concernis that African states have taken minimal steps to adopt fiscal devolution thatpromotes revenue assignment which in turn limits sub-nationalgovernments’ability to generate own source revenues.This article examines the revenue assignment function of fiscal decentralization inthe Democratic Republic of Congo(DRCinthelight of decentralizationconcerns that have been raised by civil society, as the country charts its course todemocracy. The article is a desktop study that will consider documents andpoliciesin theDRCon thenational, provincialand locallevel as far asstaterevenue sourcesare concerned. Revenue assignment should enable DRC’sprovinces and local authoritiestogeneratesignificantrevenueindependently.However, post-conflict reconstruction and development efforts in the Great Lakesregion and in the DRC have largely isolated decentralization which wouldotherwise entrench local fiscalautonomy infinancing for local services anddevelopment. The article concludes that revenue generation for local authoritiesandtheprovinces in the DRC is still very centralised by the national government.Thearticleproposes policy recommendations that will be useful for the country toensurethatdecentralization effortsinclude fiscal devolution toenhance thefinancing for local development initiatives.

Generalised Assignment Matrix Methodology in Linear Programming

Science.gov (United States)

Jerome, Lawrence

2012-01-01

Discrete Mathematics instructors and students have long been struggling with various labelling and scanning algorithms for solving many important problems. This paper shows how to solve a wide variety of Discrete Mathematics and OR problems using assignment matrices and linear programming, specifically using Excel Solvers although the same…

Fatigue influences lower extremity angular velocities during a single-leg drop vertical jump

OpenAIRE

Tamura, Akihiro; Akasaka, Kiyokazu; Otsudo, Takahiro; Shiozawa, Junya; Toda, Yuka; Yamada, Kaori

2017-01-01

[Purpose] Fatigue alters lower extremity landing strategies and decreases the ability to attenuate impact during landing. The purpose of this study was to reveal the influence of fatigue on dynamic alignment and joint angular velocities in the lower extremities during a single leg landing. [Subjects and Methods] The 34 female college students were randomly assigned to either the fatigue or control group. The fatigue group performed single-leg drop vertical jumps before, and after, the fatigue...

Model morphing and sequence assignment after molecular replacement

Energy Technology Data Exchange (ETDEWEB)

Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Mail Stop M888, Los Alamos, NM 87545 (United States); Read, Randy J. [University of Cambridge, Cambridge Institute for Medical Research, Cambridge CB2 0XY (United Kingdom); Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Bldg 64R0121, Berkeley, CA 94720 (United States); Brunger, Axel T. [Stanford University, 318 Campus Drive West, Stanford, CA 94305 (United States); Afonine, Pavel V. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Bldg 64R0121, Berkeley, CA 94720 (United States); Hung, Li-Wei [Los Alamos National Laboratory, Mail Stop M888, Los Alamos, NM 87545 (United States)

2013-11-01

A procedure for model building is described that combines morphing a model to match a density map, trimming the morphed model and aligning the model to a sequence. A procedure termed ‘morphing’ for improving a model after it has been placed in the crystallographic cell by molecular replacement has recently been developed. Morphing consists of applying a smooth deformation to a model to make it match an electron-density map more closely. Morphing does not change the identities of the residues in the chain, only their coordinates. Consequently, if the true structure differs from the working model by containing different residues, these differences cannot be corrected by morphing. Here, a procedure that helps to address this limitation is described. The goal of the procedure is to obtain a relatively complete model that has accurate main-chain atomic positions and residues that are correctly assigned to the sequence. Residues in a morphed model that do not match the electron-density map are removed. Each segment of the resulting trimmed morphed model is then assigned to the sequence of the molecule using information about the connectivity of the chains from the working model and from connections that can be identified from the electron-density map. The procedure was tested by application to a recently determined structure at a resolution of 3.2 Å and was found to increase the number of correctly identified residues in this structure from the 88 obtained using phenix.resolve sequence assignment alone (Terwilliger, 2003 ▶) to 247 of a possible 359. Additionally, the procedure was tested by application to a series of templates with sequence identities to a target structure ranging between 7 and 36%. The mean fraction of correctly identified residues in these cases was increased from 33% using phenix.resolve sequence assignment to 47% using the current procedure. The procedure is simple to apply and is available in the Phenix software package.

Model morphing and sequence assignment after molecular replacement

International Nuclear Information System (INIS)

Terwilliger, Thomas C.; Read, Randy J.; Adams, Paul D.; Brunger, Axel T.; Afonine, Pavel V.; Hung, Li-Wei

2013-01-01

A procedure for model building is described that combines morphing a model to match a density map, trimming the morphed model and aligning the model to a sequence. A procedure termed ‘morphing’ for improving a model after it has been placed in the crystallographic cell by molecular replacement has recently been developed. Morphing consists of applying a smooth deformation to a model to make it match an electron-density map more closely. Morphing does not change the identities of the residues in the chain, only their coordinates. Consequently, if the true structure differs from the working model by containing different residues, these differences cannot be corrected by morphing. Here, a procedure that helps to address this limitation is described. The goal of the procedure is to obtain a relatively complete model that has accurate main-chain atomic positions and residues that are correctly assigned to the sequence. Residues in a morphed model that do not match the electron-density map are removed. Each segment of the resulting trimmed morphed model is then assigned to the sequence of the molecule using information about the connectivity of the chains from the working model and from connections that can be identified from the electron-density map. The procedure was tested by application to a recently determined structure at a resolution of 3.2 Å and was found to increase the number of correctly identified residues in this structure from the 88 obtained using phenix.resolve sequence assignment alone (Terwilliger, 2003 ▶) to 247 of a possible 359. Additionally, the procedure was tested by application to a series of templates with sequence identities to a target structure ranging between 7 and 36%. The mean fraction of correctly identified residues in these cases was increased from 33% using phenix.resolve sequence assignment to 47% using the current procedure. The procedure is simple to apply and is available in the Phenix software package

Accuracy of administratively-assigned ancestry for diverse populations in an electronic medical record-linked biobank.

Directory of Open Access Journals (Sweden)

Jacob B Hall

Full Text Available Recently, the development of biobanks linked to electronic medical records has presented new opportunities for genetic and epidemiological research. Studies based on these resources, however, present unique challenges, including the accurate assignment of individual-level population ancestry. In this work we examine the accuracy of administratively-assigned race in diverse populations by comparing assigned races to genetically-defined ancestry estimates. Using 220 ancestry informative markers, we generated principal components for patients in our dataset, which were used to cluster patients into groups based on genetic ancestry. Consistent with other studies, we find a strong overall agreement (Kappa  = 0.872 between genetic ancestry and assigned race, with higher rates of agreement for African-descent and European-descent assignments, and reduced agreement for Hispanic, East Asian-descent, and South Asian-descent assignments. These results suggest caution when selecting study samples of non-African and non-European backgrounds when administratively-assigned race from biobanks is used.

Infrared and Raman spectra, DFT-calculations and spectral assignments of germacyclohexane

Energy Technology Data Exchange (ETDEWEB)

Aleksa, V., E-mail: valdemaras.aleksa@ff.vu.lt; Ozerenskis, D.; Pucetaite, M.; Sablinskas, V. [Faculty of Physics, Vilnius University, Sauletekio av. 9, block 3, Vilnius, LT-10222 (Lithuania); Cotter, C.; Guirgis, G. A. [Department of Chemistry and Biochemistry, College of Charleston, Charleston, SC 29424 (United States)

2015-03-30

Raman spectra of germacyclohexane in liquid and solid states were recorded and depolarization data obtained. Infrared absorption spectra of the vapor and liquid have been studied. The wavenumbers of the vibrational modes were derived in the harmonic and anharmonic approximation in B3LYP/ccpVTZ calculations. According to the calculations, germacyclohexane exists in the stable chair conformation, whereas a possible twist form should have more than 15 kJ·mol{sup -1} higher enthalpy of formation what makes this conformer experimentally not observable. The 27 A' and 21 A'' fundamentals were assigned on the basis of the calculations and infrared and Raman band intensities, contours of gas phase infrared spectral bands and Raman depolarization measurements. An average discrepancy of ca. 0.77 % was found between the observed and the calculated anharmonic wavenumbers for the 48 modes. Substitution of carbon atom with Ge atom in the cyclohexane ring is reasoning flattening of the ring.

Value encoding in single neurons in the human amygdala during decision making.

Science.gov (United States)

Jenison, Rick L; Rangel, Antonio; Oya, Hiroyuki; Kawasaki, Hiroto; Howard, Matthew A

2011-01-05

A growing consensus suggests that the brain makes simple choices by assigning values to the stimuli under consideration and then comparing these values to make a decision. However, the network involved in computing the values has not yet been fully characterized. Here, we investigated whether the human amygdala plays a role in the computation of stimulus values at the time of decision making. We recorded single neuron activity from the amygdala of awake patients while they made simple purchase decisions over food items. We found 16 amygdala neurons, located primarily in the basolateral nucleus that responded linearly to the values assigned to individual items.

Exhortation toward assigning of keywords in free terms to papers by their authors

International Nuclear Information System (INIS)

Ebinuma, Yukio

1977-01-01

The features and the effective utilization of keywords are explained, and the prompt author-assigned keywords are desirable. What are the keywords is illustrated with two examples. The keywords have more detailed information than subject headings. A set of keywords express a gist of paper briefly and represent the contents of the paper approximately. The keywords can be selected easily because they are the arrangement of technical terms. The following effects are expected when the keywords are written together in papers: (1) the papers attract attention easily; (2) the circulation of the papers becomes wider and more exact; (3) the classification is made more accurately; (4) the indexes of subjects are easy to make; and (5) the keywords can be utilized for the administration of papers: The knowledge of assigning keywords is (1) to select meaningful words, (2) to use noun form, (3) to employ the terms having meaning as narrow as possible, (4) to use full spelling for the names of elements, nuclides, compounds and alloys, (5) to use only the abbreviations which are popular internationally, (6) to use only the compound words and phrases which are commonly used, (7) to take care not to omit words in selection because they are too natural, (8) to select about ten keywords, (9) to make a short sentence with the selected keywords, and (10) to adapt words, if any, which still perplex the author, within 15 keywords. The knowledge for instituting keyword system is that (1) the original authors of papers select keywords; (2) check-up must be required during initial one or two years for unifying expression; (3) keywords must be assigned to as many papers as possible, (4) keywords should be selected from headings and abstracts as a rule; (5) keywords are expressed in English and; (6) the prescription on keywords must be specified in the regulations and manuals for writing. (Iwakiri, K.)

28 CFR 345.35 - Assignments to FPI.

Science.gov (United States)

2010-07-01

..., color, religion, ethnic origin, age, or disability. (b) The SOI ordinarily makes assignments based on... course in pre-industrial training or on-the-job training (as available) before promotion to pay grade four. (2) An inmate who has not successfully completed pre-industrial or on-the-job training remains at...

Fragment assignment in the cloud with eXpress-D

Science.gov (United States)

2013-01-01

Background Probabilistic assignment of ambiguously mapped fragments produced by high-throughput sequencing experiments has been demonstrated to greatly improve accuracy in the analysis of RNA-Seq and ChIP-Seq, and is an essential step in many other sequence census experiments. A maximum likelihood method using the expectation-maximization (EM) algorithm for optimization is commonly used to solve this problem. However, batch EM-based approaches do not scale well with the size of sequencing datasets, which have been increasing dramatically over the past few years. Thus, current approaches to fragment assignment rely on heuristics or approximations for tractability. Results We present an implementation of a distributed EM solution to the fragment assignment problem using Spark, a data analytics framework that can scale by leveraging compute clusters within datacenters–“the cloud”. We demonstrate that our implementation easily scales to billions of sequenced fragments, while providing the exact maximum likelihood assignment of ambiguous fragments. The accuracy of the method is shown to be an improvement over the most widely used tools available and can be run in a constant amount of time when cluster resources are scaled linearly with the amount of input data. Conclusions The cloud offers one solution for the difficulties faced in the analysis of massive high-thoughput sequencing data, which continue to grow rapidly. Researchers in bioinformatics must follow developments in distributed systems–such as new frameworks like Spark–for ways to port existing methods to the cloud and help them scale to the datasets of the future. Our software, eXpress-D, is freely available at: http://github.com/adarob/express-d. PMID:24314033

Position statement. The right to accept or reject an assignment. American Nurses Association.

Science.gov (United States)

1996-01-01

The American Nurses Association (ANA) believes that nurses should reject assignment that puts patients or themselves in serious, immediate jeopardy. ANA supports the nurses obligation to reject an assignment in these situations even where there is not a specific legal protection for rejecting such an assignment. The professional obligations to the nurse to safeguard clients are grounded in the ethical norms of the profession, the Standards of Clinical Nursing Practice and state nurse practice acts.

A Branch-and-Price algorithm for stable workforce assignments with hierarchical skills

NARCIS (Netherlands)

Firat, M.; Briskorn, D.; Laugier, A.

2016-01-01

This paper deals with assigning hierarchically skilled technicians to jobs by considering preferences. We investigate stability definitions in multi-skill workforce assignments stemming from the notion of blocking pairs as stated in the Marriage model of Gale–Shapley. We propose a Branch-and-Price

Review of high-level waste form properties

International Nuclear Information System (INIS)

Rusin, J.M.

1980-12-01

This report is a review of waste form options for the immobilization of high-level-liquid wastes from the nuclear fuel cycle. This review covers the status of international research and development on waste forms as of May 1979. Although the emphasis in this report is on waste form properties, process parameters are discussed where they may affect final waste form properties. A summary table is provided listing properties of various nuclear waste form options. It is concluded that proposed waste forms have properties falling within a relatively narrow range. In regard to crystalline versus glass waste forms, the conclusion is that either glass of crystalline materials can be shown to have some advantage when a single property is considered; however, at this date no single waste form offers optimum properties over the entire range of characteristics investigated. A long-term effort has been applied to the development of glass and calcine waste forms. Several additional waste forms have enough promise to warrant continued research and development to bring their state of development up to that of glass and calcine. Synthetic minerals, the multibarrier approach with coated particles in a metal matrix, and high pressure-high temperature ceramics offer potential advantages and need further study. Although this report discusses waste form properties, the total waste management system should be considered in the final selection of a waste form option. Canister design, canister materials, overpacks, engineered barriers, and repository characteristics, as well as the waste form, affect the overall performance of a waste management system. These parameters were not considered in this comparison

Statistical methods of spin assignment in compound nuclear reactions

International Nuclear Information System (INIS)

Mach, H.; Johns, M.W.

1984-01-01

Spin assignment to nuclear levels can be obtained from standard in-beam gamma-ray spectroscopy techniques and in the case of compound nuclear reactions can be complemented by statistical methods. These are based on a correlation pattern between level spin and gamma-ray intensities feeding low-lying levels. Three types of intensity and level spin correlations are found suitable for spin assignment: shapes of the excitation functions, ratio of intensity at two beam energies or populated in two different reactions, and feeding distributions. Various empirical attempts are examined and the range of applicability of these methods as well as the limitations associated with them are given. 12 references

Statistical methods of spin assignment in compound nuclear reactions

International Nuclear Information System (INIS)

Mach, H.; Johns, M.W.

1985-01-01

Spin assignment to nuclear levels can be obtained from standard in-beam gamma-ray spectroscopy techniques and in the case of compound nuclear reactions can be complemented by statistical methods. These are based on a correlation pattern between level spin and gamma-ray intensities feeding low-lying levels. Three types of intensity and level spin correlations are found suitable for spin assignment: shapes of the excitation functions, ratio of intensity at two beam energies or populated in two different reactions, and feeding distributions. Various empirical attempts are examined and the range of applicability of these methods as well as the limitations associated with them are given

Effect of multiple forming tools on geometrical and mechanical properties in incremental sheet forming

Science.gov (United States)

Wernicke, S.; Dang, T.; Gies, S.; Tekkaya, A. E.

2018-05-01

The tendency to a higher variety of products requires economical manufacturing processes suitable for the production of prototypes and small batches. In the case of complex hollow-shaped parts, single point incremental forming (SPIF) represents a highly flexible process. The flexibility of this process comes along with a very long process time. To decrease the process time, a new incremental forming approach with multiple forming tools is investigated. The influence of two incremental forming tools on the resulting mechanical and geometrical component properties compared to SPIF is presented. Sheets made of EN AW-1050A were formed to frustums of a pyramid using different tool-path strategies. Furthermore, several variations of the tool-path strategy are analyzed. A time saving between 40% and 60% was observed depending on the tool-path and the radii of the forming tools while the mechanical properties remained unchanged. This knowledge can increase the cost efficiency of incremental forming processes.

Dynamic Passenger Assignment during Disruptions in Railway Systems

NARCIS (Netherlands)

Zhu, Y.; Goverde, R.M.P.

2017-01-01

Passenger-oriented rescheduling problems receive increasing attention. However, the passenger assignment models used for evaluating the rescheduling solutions are usually simplified by many assumptions. To estimate passenger inconvenience more accurately, this paper establishes a dynamic passenger

Exploiting Group Symmetry in Semidefinite Programming Relaxations of the Quadratic Assignment Problem

NARCIS (Netherlands)

de Klerk, E.; Sotirov, R.

2007-01-01

We consider semidefinite programming relaxations of the quadratic assignment problem, and show how to exploit group symmetry in the problem data. Thus we are able to compute the best known lower bounds for several instances of quadratic assignment problems from the problem library: [R.E. Burkard,

Investigating Plagiarism: The Form and The Motivation in Performing Plagiarism in High Education

Directory of Open Access Journals (Sweden)

S Sariffuddin

2017-05-01

Full Text Available The rapid development of information technology, especially the Internet is pointed out to be factor driving the student to practice plagiarism. Prevention efforts continue to be made both from government policies and stakeholder by creating software anti-plagiarism. However, in the reality the practice of plagiarism re-mains common and relatively more widespread. This practice continues to be varied, so that we need to up-date the information and findings through investigations plagiarism practices in student assign-ments. The method used was a mixed-method approach or mix of quantitative and quali-tative approaches. A quantitative approach was done by using software turnitin.com to scan for plagiarism indication of the level of student assignment in common. To study the behavior of plagiarism, the interview process was also done informally to students who commit high plagiarism. The results showed that the pattern of students’ plagiarism consists of five forms: sham paraphrasing, illicit paraphrasing, other plagiarism, copying verbatim and purloining. Illicit paraphrasing practices are a form of copy-paste literature review and did not pay attention to the bibliography. Besides, the practice of plagiarism is closely associated with low academic writing knowledge. Therefore, the practice of plagiarism should not only be viewed from the perspective of the academic violations, but also from the other perspectives.

Single P-N junction tandem photovoltaic device

Science.gov (United States)

Walukiewicz, Wladyslaw [Kensington, CA; Ager, III, Joel W.; Yu, Kin Man [Lafayette, CA

2011-10-18

A single P-N junction solar cell is provided having two depletion regions for charge separation while allowing the electrons and holes to recombine such that the voltages associated with both depletion regions of the solar cell will add together. The single p-n junction solar cell includes an alloy of either InGaN or InAlN formed on one side of the P-N junction with Si formed on the other side in order to produce characteristics of a two junction (2J) tandem solar cell through only a single P-N junction. A single P-N junction solar cell having tandem solar cell characteristics will achieve power conversion efficiencies exceeding 30%.

Accounting for Sustainability: An Active Learning Assignment

Science.gov (United States)

Gusc, Joanna; van Veen-Dirks, Paula

2017-01-01

Purpose: Sustainability is one of the newer topics in the accounting courses taught in university teaching programs. The active learning assignment as described in this paper was developed for use in an accounting course in an undergraduate program. The aim was to enhance teaching about sustainability within such a course. The purpose of this…

A Comparative Analysis of Pair-work and Individual Assignments In two ELT Grammar Classes

Directory of Open Access Journals (Sweden)

Olcay Sert

2005-10-01

Full Text Available Assignments prepared in pair-work have long been evaluated to be more successful whencompared to individually prepared assignments in many respects in foreign language learningcontexts. However, there is not much research conducted to reveal the advantages of pair-work in preparing assignments and the linguistic characteristics of the finished texts. In this paper, depending upon an experimental study with the first year students in Department of EnglishLanguage Teaching at Hacettepe University, quality of pair-work assignments and the factors affecting the preparation process are discussed and compared to individual assignments. Results indicate a variety of advantages of student collaboration in preparing written work since outputsare far more grammatical, include less spelling mistakes, and indicate a higher level ofgrammatical awareness. Additionally, pair-work helps students build positive interpersonalrelationships and create a high level of academic solidarity and confidence.

Assigned value improves memory of proper names.

Science.gov (United States)

Festini, Sara B; Hartley, Alan A; Tauber, Sarah K; Rhodes, Matthew G

2013-01-01

Names are more difficult to remember than other personal information such as occupations. The current research examined the influence of assigned point value on memory and metamemory judgements for names and occupations to determine whether incentive can improve recall of proper names. In Experiment 1 participants studied face-name and face-occupation pairs assigned 1 or 10 points, made judgements of learning, and were given a cued recall test. High-value names were recalled more often than low-value names. However, recall of occupations was not influenced by value. In Experiment 2 meaningless nonwords were used for both names and occupations. The name difficulty disappeared, and value influenced recall of both names and occupations. Thus value similarly influenced names and occupations when meaningfulness was held constant. In Experiment 3 participants were required to use overt rote rehearsal for all items. Value did not boost recall of high-value names, suggesting that differential processing could not be implemented to improve memory. Thus incentives may improve memory for proper names by motivating people to engage in selective rehearsal and effortful elaborative processing.

Microwave, infrared and Raman spectra, adjusted r{sub 0} structural parameters, conformational stability, and vibrational assignment of cyclopropylfluorosilane

Energy Technology Data Exchange (ETDEWEB)

Panikar, Savitha S. [Department of Chemistry, University of Missouri-Kansas City, Kansas City, MO 64110 (United States); Guirgis, Gamil A.; Eddens, Matthew T.; Dukes, Horace W. [Department of Chemistry and Biochemistry, College of Charleston, Charleston, SC 29424 (United States); Conrad, Andrew R.; Tubergen, Michael J. [Department of Chemistry, Kent State University, Kent, OH 44242 (United States); Gounev, Todor K. [Department of Chemistry, University of Missouri-Kansas City, Kansas City, MO 64110 (United States); Durig, James R., E-mail: durigj@umkc.edu [Department of Chemistry, University of Missouri-Kansas City, Kansas City, MO 64110 (United States)

2013-03-29

Highlights: ► The most stable gauche conformer has been identified from microwave spectra. ► Enthalpy difference has been determined between the two forms. ► Adjusted r{sub 0} structures were obtained for the gauche form. ► Ab initio calculations were performed for the two conformers. - Abstract: FT-microwave, infrared spectra of gas and Raman spectra of liquid for cyclopropylfluorosilane, c-C{sub 3}H{sub 5}SiH{sub 2}F have been recorded. 51 transitions for the {sup 28}Si, {sup 29}Si, and {sup 30}Si isotopomers have been assigned for the gauche conformer. Enthalpy differences in xenon solution by variable temperature infrared spectra between the more stable gauche and lesser stable cis form gave 109 ± 9 cm{sup −1}. From the microwave rotational constants for the three isotopomers ({sup 28}Si, {sup 29}Si, {sup 30}Si) combined with structural parameters predicted from MP2(full)/6-311+G(d, p) calculations, adjusted r{sub 0} structural parameters were obtained for the gauche conformer. The heavy atom distances (Å): Si–C{sub 2} = 1.836(3); C{sub 2}–C{sub 4} = 1.525(3); C{sub 2}–C{sub 5} = 1.519(3); C{sub 4}–C{sub 5} = 1.494(3); Si–F = 1.594(3) and angles (°): ∠CSiF = 111.2(5); ∠SiC{sub 2}C{sub 4} = 117.5(5); ∠SiC{sub 2}C{sub 5} = 119.2(5). To support the vibrational assignments, MP2(full)/6-31G(d) calculations were carried out. Results are discussed and compared to the corresponding properties of some similar molecules.

1H, 13C and 15N chemical shift assignments of the thioredoxin from the obligate anaerobe Desulfovibrio vulgaris Hildenborough.

Science.gov (United States)

Garcin, Edwige B; Bornet, Olivier; Pieulle, Laetitia; Guerlesquin, Françoise; Sebban-Kreuzer, Corinne

2011-10-01

Thioredoxins are ubiquitous key antioxidant enzymes which play an essential role in cell defense against oxidative stress. They maintain the redox homeostasis owing to the regulation of thiol-disulfide exchange. In the present paper, we report the full resonance assignments of (1)H, (13)C and (15)N atoms for the reduced and oxidized forms of Desulfovibrio vulgaris Hildenborough thioredoxin 1 (Trx1). 2D and 3D heteronuclear NMR experiments were performed using uniformly (15)N-, (13)C-labelled Trx1. Chemical shifts of 97% of the backbone and 90% of the side chain atoms were obtained for the oxidized and reduced form (BMRB deposits with accession number 17299 and 17300, respectively).

Psychology Students' Understanding of the Skill-Based Learning Fostered through University Assignments

Science.gov (United States)

Martini, Tanya S.; Rail, Ashley; Norton, Cole

2015-01-01

We examined first-year psychology majors' (N = 195) beliefs about the relevance of two types of university assignments (individual essay and group wiki) and their connection to the development of career-related skills. Students reported that assignments were only somewhat relevant to their career goals, and relevance ratings were typically…

A method to assign failure rates for piping reliability assessments

International Nuclear Information System (INIS)

Gamble, R.M.; Tagart, S.W. Jr.

1991-01-01

This paper reports on a simplified method that has been developed to assign failure rates that can be used in reliability and risk studies of piping. The method can be applied on a line-by-line basis by identifying line and location specific attributes that can lead to piping unreliability from in-service degradation mechanisms and random events. A survey of service experience for nuclear piping reliability also was performed. The data from this survey provides a basis for identifying in-service failure attributes and assigning failure rates for risk and reliability studies

Waste-aware fluid volume assignment for flow-based microfluidic biochips

DEFF Research Database (Denmark)

Schneider, Alexander Rüdiger; Pop, Paul; Madsen, Jan

2017-01-01

complex Fluidic Units (FUs) such as switches, micropumps, mixers and separators can be constructed. When running a biochemical application on a FBMB, fluid volumes are dispensed from input reservoirs and used by the FUs. Given a biochemical application and a biochip, we are interested in determining...... the fluid volume assignment for each operation of the application, such that the FUs volume requirements are satisfied, while over- and underflow are avoided and the total volume of fluid used is minimized. We propose an algorithm for this fluid assignment problem. Compared to previous work, our method...

Asymmetry in some common assignment algorithms: the dispersion factor solution

OpenAIRE

T de la Barra; B Pérez

1986-01-01

Many common assignment algorithms are based on Dial's original design to determine the paths that trip makers will follow from a given origin to destination centroids. The purpose of this paper is to show that the rules that have to be applied result in two unwanted properties. The first is that trips assigned from an origin centroid i to a destination j can be dramatically different to those resulting from centroid j to centroid i , even if the number of trips is the same and the network is ...

36 CFR 292.22 - Land category assignments.

Science.gov (United States)

2010-07-01

... land. (iv) Commercial land. (2) Not later than August 12, 1994, a map or maps displaying the privately... availability of this map or maps in the local newspapers of record. (b) Changes in land category assignment.../grazing land so long as the intended use or development is consistent with the standards in § 292.23 and...

Single-photon imaging

CERN Document Server

Seitz, Peter

2011-01-01

The acquisition and interpretation of images is a central capability in almost all scientific and technological domains. In particular, the acquisition of electromagnetic radiation, in the form of visible light, UV, infrared, X-ray, etc. is of enormous practical importance. The ultimate sensitivity in electronic imaging is the detection of individual photons. With this book, the first comprehensive review of all aspects of single-photon electronic imaging has been created. Topics include theoretical basics, semiconductor fabrication, single-photon detection principles, imager design and applications of different spectral domains. Today, the solid-state fabrication capabilities for several types of image sensors has advanced to a point, where uncoooled single-photon electronic imaging will soon become a consumer product. This book is giving a specialist´s view from different domains to the forthcoming “single-photon imaging” revolution. The various aspects of single-photon imaging are treated by internati...

Transdisciplinary assignments in graduate health education as a model for future collaboration.

Science.gov (United States)

Christie, Catherine; Smith, A Russell; Bednarzyk, Michele

2007-01-01

Transdisciplinary health care continues to be at the forefront of patient treatment in the medical arena, in part due to escalating health care costs, an increasing aging population, and the development of multiple chronic diseases. Gaining the knowledge, experience, and principles associated with transdisciplinary teamwork to successfully prepare for modern-day practice is therefore essential for individuals of various health care professions. This report describes an assignment developed and implemented to facilitate professional interaction between graduate physical therapy, nutrition, and nursing students. The objectives of this assignment were to determine through student evaluation the effects of a transdisciplinary experience on students' understanding of the role of another discipline and students' communication skills across disciplines. When evaluating the assignment, students most often remarked that they developed a greater understanding of the roles of the included disciplines and reported a significant increase in communication skills. However, some students did not concur that this assignment was effective due to the scheduling conflicts and lack of teamwork that can occur during a collaborative project. The students' reports of their experiences in completing the assignment provide valuable insights for implementing and/or updating a preparatory transdisciplinary education component in other settings. Additional research can focus on the challenges faced by the majority of the students venturing into actual health care or "real-world" settings for comparative studies.

Bag-of-features based medical image retrieval via multiple assignment and visual words weighting

KAUST Repository

Wang, Jingyan

2011-11-01

Bag-of-features based approaches have become prominent for image retrieval and image classification tasks in the past decade. Such methods represent an image as a collection of local features, such as image patches and key points with scale invariant feature transform (SIFT) descriptors. To improve the bag-of-features methods, we first model the assignments of local descriptors as contribution functions, and then propose a novel multiple assignment strategy. Assuming the local features can be reconstructed by their neighboring visual words in a vocabulary, reconstruction weights can be solved by quadratic programming. The weights are then used to build contribution functions, resulting in a novel assignment method, called quadratic programming (QP) assignment. We further propose a novel visual word weighting method. The discriminative power of each visual word is analyzed by the sub-similarity function in the bin that corresponds to the visual word. Each sub-similarity function is then treated as a weak classifier. A strong classifier is learned by boosting methods that combine those weak classifiers. The weighting factors of the visual words are learned accordingly. We evaluate the proposed methods on medical image retrieval tasks. The methods are tested on three well-known data sets, i.e., the ImageCLEFmed data set, the 304 CT Set, and the basal-cell carcinoma image set. Experimental results demonstrate that the proposed QP assignment outperforms the traditional nearest neighbor assignment, the multiple assignment, and the soft assignment, whereas the proposed boosting based weighting strategy outperforms the state-of-the-art weighting methods, such as the term frequency weights and the term frequency-inverse document frequency weights. © 2011 IEEE.

Bag-of-features based medical image retrieval via multiple assignment and visual words weighting

KAUST Repository

Wang, Jingyan; Li, Yongping; Zhang, Ying; Wang, Chao; Xie, Honglan; Chen, Guoling; Gao, Xin

2011-01-01

Bag-of-features based approaches have become prominent for image retrieval and image classification tasks in the past decade. Such methods represent an image as a collection of local features, such as image patches and key points with scale invariant feature transform (SIFT) descriptors. To improve the bag-of-features methods, we first model the assignments of local descriptors as contribution functions, and then propose a novel multiple assignment strategy. Assuming the local features can be reconstructed by their neighboring visual words in a vocabulary, reconstruction weights can be solved by quadratic programming. The weights are then used to build contribution functions, resulting in a novel assignment method, called quadratic programming (QP) assignment. We further propose a novel visual word weighting method. The discriminative power of each visual word is analyzed by the sub-similarity function in the bin that corresponds to the visual word. Each sub-similarity function is then treated as a weak classifier. A strong classifier is learned by boosting methods that combine those weak classifiers. The weighting factors of the visual words are learned accordingly. We evaluate the proposed methods on medical image retrieval tasks. The methods are tested on three well-known data sets, i.e., the ImageCLEFmed data set, the 304 CT Set, and the basal-cell carcinoma image set. Experimental results demonstrate that the proposed QP assignment outperforms the traditional nearest neighbor assignment, the multiple assignment, and the soft assignment, whereas the proposed boosting based weighting strategy outperforms the state-of-the-art weighting methods, such as the term frequency weights and the term frequency-inverse document frequency weights. © 2011 IEEE.

Stereospecific assignments of glycine in proteins by stereospecific deuteration and {sup 15}N labeling

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.P.; Curley, R.W. Jr.; Panigot, M.J.; Fesik, S.W. [Ohio State Univ., Columbus, OH (United States)

1994-12-01

Stereospecific assignments are important for accurately determining the three-dimensional structures of proteins through the use of multidimensional NMR techniques. It is especially important to stereospecifically assign the glycine {alpha}-protons in proteins because of the potential for different backbone conformations of this residue. These stereospecific assignments are critical for interpreting the {sup 3}J{sub NH,{alpha}H} coupling constants and NOEs involving the glycine {alpha}-protons that determine the conformation of this part of the protein. However, it is often difficult to unambiguously obtain the stereospecific assignments for glycine residues by using only NOE data. In this poster, we present a method for unambiguous, stereospecific assignment of the {alpha}-protons of glycine residues. This method involves synthesis of stereo-specifically deuterated and {sup 15}N-labeled Gly using a slightly modified procedure originally described by Woodard and coworkers for the stereoselective deuteration of glycine. The stereospecifically deuterated and {sup 15}N-labeled Gy has been incorporated into recombinant proteins expressed in both bacterial systems (FKBP) and mammalian cells (u-PA). Two- and three-dimensional isotope-filtered and isotope-edited NMR experiments were used to obtain the stereospecific assignments of the glycine {alpha}-protons for these proteins.

MesonNet Workshop on Meson Transition Form Factors

CERN Document Server

Eidelman, S; Hanhart, C; Kubis, B; Kupsc, A; Leupold, S; Moskal, P; Schadmand, S

2012-01-01

The mini-proceedings of the Workshop on Meson Transition Form Factors held in Cracow from May 29th to 30th, 2012 introduce the meson transition form factor project with special emphasis on the interrelations between the various form factors (on-shell, single off-shell, double off-shell). Short summaries of the talks presented at the workshop follow.

Non-Coop Station History Forms Digest

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Single 71-page document entitled 'Station history non-COOP Keying Rules & Forms Digest,' dated December 12, 2003. Contractors with NCDC Climate Database...

Final Evaluation of Assignment: Media Literacy. A Report to the Discovery Channel.

Science.gov (United States)

Kubey, Robert; Serafin, Gina Marcello

The Assignment: Media Literacy curriculum is a 6-module media literacy curriculum developed by Renee Hobbs of Babson College and her staff in collaboration with the Discovery Channel. There are three versions of Assignment: Media Literacy, one for elementary school students, one for middle school students, and one for high school students. Close…

Modelling the Preferences of Students for Alternative Assignment Designs Using the Discrete Choice Experiment Methodology

Directory of Open Access Journals (Sweden)

Brendan Kennelly

2014-11-01

Full Text Available This paper outlines how a discrete choice experiment (DCE can be used to learn more about how students are willing to trade off various features of assignments such as the nature and timing of feedback and the method used to submit assignments. A DCE identifies plausible levels of the key attributes of a good or service and then presents the respondent with alternative bundles of these attributes and their levels and asks the respondent to choose between particular bundles. We report results from a DCE we conducted with undergraduate business students regarding their preferences for assignment systems. We find that the most important features of assignments are how relevant the assignments are for exam preparation and the nature of the feedback that students receive. We also find that students generally prefer online to paper assignments. We argue that the DCE approach has a lot of potential in education research.

Comparison of new forms of creatine in raising plasma creatine levels

Directory of Open Access Journals (Sweden)

Purpura Martin

2007-11-01

Full Text Available Abstract Background Previous research has shown that plasma creatine levels are influenced by extracellular concentrations of insulin and glucose as well as by the intracellular creatine concentration. However, the form of creatine administered does not appear to have any effect although specific data on this is lacking. This study examined whether the administration of three different forms of creatine had different effects on plasma creatine concentrations and pharmacokinetics. Methods Six healthy subjects (three female and three male subjects participated in the study. Each subject was assigned to ingest a single dose of isomolar amounts of creatine (4.4 g in the form of creatine monohydrate (CrM, tri-creatine citrate (CrC, or creatine pyruvate (CrPyr using a balanced cross-over design. Plasma concentration curves, determined over eight hours after ingestion, were subject to pharmacokinetic analysis and primary derived data were analyzed by repeated measures ANOVA. Results Mean peak concentrations and area under the curve (AUC were significantly higher with CrPyr (17 and 14%, respectively in comparison to CrM and CrC. Mean peak concentration and AUC were not significantly different between CrM and CrC. Despite the higher peak concentration with CrPyr there was no difference between the estimated velocity constants of absorption (ka or elimination (kel between the three treatments. There was no effect of treatment with CrPyr on the plasma pyruvate concentration. Conclusion The findings suggest that different forms of creatine result in slightly altered kinetics of plasma creatine absorption following ingestion of isomolar (with respect to creatine doses of CrM, CrC and CrPyr although differences in ka could not be detected due to the small number of blood samples taken during the absorption phase. Characteristically this resulted in higher plasma concentrations of creatine with CrPyr. Differences in bioavailability are thought to be unlikely

A Review on Eigenstructure Assignment Methods and Orthogonal Eigenstructure Control of Structural Vibrations

Directory of Open Access Journals (Sweden)

Mohammad Rastgaar

2009-01-01

Full Text Available This paper provides a state-of-the-art review of eigenstructure assignment methods for vibration cancellation. Eigenstructure assignment techniques have been widely used during the past three decades for vibration suppression in structures, especially in large space structures. These methods work similar to mode localization in which global vibrations are managed such that they remain localized within the structure. Such localization would help reducing vibrations more effectively than other methods of vibration cancellation, by virtue of confining the vibrations close to the source of disturbance. The common objective of different methods of eigenstructure assignment is to provide controller design freedom beyond pole placement, and define appropriate shapes for the eigenvectors of the systems. These methods; however, offer a large and complex design space of options that can often overwhelm the control designer. Recent developments in orthogonal eigenstructure control offers a significant simplification of the design task while allowing some experience-based design freedom. The majority of the papers from the past three decades in structural vibration cancellation using eigenstructure assignment methods are reviewed, along with recent studies that introduce new developments in eigenstructure assignment techniques.

De novo protein structure generation from incomplete chemical shift assignments

Energy Technology Data Exchange (ETDEWEB)

Shen Yang [National Institutes of Health, Laboratory of Chemical Physics, National Institute of Diabetes and Digestive and Kidney Diseases (United States); Vernon, Robert; Baker, David [University of Washington, Department of Biochemistry and Howard Hughes Medical Institute (United States); Bax, Ad [National Institutes of Health, Laboratory of Chemical Physics, National Institute of Diabetes and Digestive and Kidney Diseases (United States)], E-mail: bax@nih.gov

2009-02-15

NMR chemical shifts provide important local structural information for proteins. Consistent structure generation from NMR chemical shift data has recently become feasible for proteins with sizes of up to 130 residues, and such structures are of a quality comparable to those obtained with the standard NMR protocol. This study investigates the influence of the completeness of chemical shift assignments on structures generated from chemical shifts. The Chemical-Shift-Rosetta (CS-Rosetta) protocol was used for de novo protein structure generation with various degrees of completeness of the chemical shift assignment, simulated by omission of entries in the experimental chemical shift data previously used for the initial demonstration of the CS-Rosetta approach. In addition, a new CS-Rosetta protocol is described that improves robustness of the method for proteins with missing or erroneous NMR chemical shift input data. This strategy, which uses traditional Rosetta for pre-filtering of the fragment selection process, is demonstrated for two paramagnetic proteins and also for two proteins with solid-state NMR chemical shift assignments.

Performance evaluation of distributed wavelength assignment in WDM optical networks

Science.gov (United States)

Hashiguchi, Tomohiro; Wang, Xi; Morikawa, Hiroyuki; Aoyama, Tomonori

2004-04-01

In WDM wavelength routed networks, prior to a data transfer, a call setup procedure is required to reserve a wavelength path between the source-destination node pairs. A distributed approach to a connection setup can achieve a very high speed, while improving the reliability and reducing the implementation cost of the networks. However, along with many advantages, several major challenges have been posed by the distributed scheme in how the management and allocation of wavelength could be efficiently carried out. In this thesis, we apply a distributed wavelength assignment algorithm named priority based wavelength assignment (PWA) that was originally proposed for the use in burst switched optical networks to the problem of reserving wavelengths of path reservation protocols in the distributed control optical networks. Instead of assigning wavelengths randomly, this approach lets each node select the "safest" wavelengths based on the information of wavelength utilization history, thus unnecessary future contention is prevented. The simulation results presented in this paper show that the proposed protocol can enhance the performance of the system without introducing any apparent drawbacks.

Efficient Stereospecific Hβ2/3 NMR Assignment Strategy for Mid-Size Proteins

Directory of Open Access Journals (Sweden)

Alexandra Born

2018-06-01

Full Text Available We present a strategy for stereospecific NMR assignment of Hβ2 and Hβ3 protons in mid-size proteins (~150 residues. For such proteins, resonance overlap in standard experiments is severe, thereby preventing unambiguous assignment of a large fraction of β-methylenes. To alleviate this limitation, assignment experiments may be run in high static fields, where higher decoupling power is required. Three-bond Hα–Hβ J-couplings (3JHα–Hβ are critical for stereospecific assignments of β-methylene protons, and for determining rotameric χ1 states. Therefore, we modified a pulse sequence designed to measure accurate 3JHα–Hβ couplings such that probe heating was reduced, while the decoupling performance was improved. To further increase the resolution, we applied non-uniform sampling (NUS schemes in the indirect 1H and 13C dimensions. The approach was applied to two medium-sized proteins, odorant binding protein 22 (OBP22; 14.4 kDa and Pin1 (18.2 kDa, at 900 MHz polarizing fields. The coupling values obtained from NUS and linear sampling were extremely well correlated. However, NUS decreased the overlap of Hβ2/3 protons, thus supplying a higher yield of extracted 3JHα-Hβ coupling values when compared with linear sampling. A similar effect could be achieved with linear prediction applied to the linearly sampled data prior to the Fourier transformation. Finally, we used 3JHα–Hβ couplings from Pin1 in combination with either conventional or exact nuclear Overhauser enhancement (eNOE restraints to determine the stereospecific assignments of β-methylene protons. The use of eNOEs further increased the fraction of unambiguously assigned resonances when compared with procedures using conventional NOEs.

Scalable Task Assignment for Heterogeneous Multi-Robot Teams

Directory of Open Access Journals (Sweden)

Paula García

2013-02-01

Full Text Available This work deals with the development of a dynamic task assignment strategy for heterogeneous multi-robot teams in typical real world scenarios. The strategy must be efficiently scalable to support problems of increasing complexity with minimum designer intervention. To this end, we have selected a very simple auction-based strategy, which has been implemented and analysed in a multi-robot cleaning problem that requires strong coordination and dynamic complex subtask organization. We will show that the selection of a simple auction strategy provides a linear computational cost increase with the number of robots that make up the team and allows the solving of highly complex assignment problems in dynamic conditions by means of a hierarchical sub-auction policy. To coordinate and control the team, a layered behaviour-based architecture has been applied that allows the reusing of the auction-based strategy to achieve different coordination levels.

P-wave assignment of 232Th neutron resonances

International Nuclear Information System (INIS)

Corvi, F.; Pasquariello, G.; Veen, T. van der

1978-01-01

A method of p-wave assignment which exploits the parity dependence of the primary capture γ-ray spectrum was applied to the 232 Th resonance. The yield of capture γ-rays above 4.4 MeV from a 6 mm thick metallic thorium disk was measured in the neutron energy range 20-2200 eV and compared to a similar run with γ-rays in the range 3.7 - 4.4 MeV. A total of 58 resonances showing an enhancement of the high energy γ-ray yield were assigned as p-waves. Assuming that their reduced neutron widths follow a Porter-Thomas distribution, their average value and then the p-wave strength function S 1 were estimated with a maximum likelihood method. The results are: average neutron width=3.4(+0.8 or -0.6)meV; S 1 = 2.0 (+0.5 or -0.4).10 -4

Automorphic Forms and Mock Modular Forms in String Theory

Science.gov (United States)

Nazaroglu, Caner

We study a variety of modular invariant objects in relation to string theory. First, we focus on Jacobi forms over generic rank lattices and Siegel forms that appear in N = 2, D = 4 compactifications of heterotic string with Wilson lines. Constraints from low energy spectrum and modularity are employed to deduce the relevant supersymmetric partition functions entirely. This procedure is applied on models that lead to Jacobi forms of index 3, 4, 5 as well as Jacobi forms over root lattices A2 and A3. These computations are then checked against an explicit orbifold model which can be Higgsed to the models under question. Models with a single Wilson line are then studied in detail with their relation to paramodular group Gammam as T-duality group made explicit. These results on the heterotic string side are then turned into predictions for geometric invariants using TypeII - Heterotic duality. Secondly, we study theta functions for indenite signature lattices of generic signature. Building on results in literature for signature (n-1,1) and (n-2,2) lattices, we work out the properties of generalized error functions which we call r-tuple error functions. We then use these functions to build such indenite theta functions and describe their modular completions.

Modeling multiple visual words assignment for bag-of-features based medical image retrieval

KAUST Repository

Wang, Jim Jing-Yan

2012-01-01

In this paper, we investigate the bag-of-features based medical image retrieval methods, which represent an image as a collection of local features, such as image patch and key points with SIFT descriptor. To improve the bag-of-features method, we first model the assignment of local descriptor as contribution functions, and then propose a new multiple assignment strategy. By assuming the local feature can be reconstructed by its neighboring visual words in vocabulary, we solve the reconstruction weights as a QP problem and then use the solved weights as contribution functions, which results in a new assignment method called the QP assignment. We carry our experiments on ImageCLEFmed datasets. Experiments\\' results show that our proposed method exceeds the performances of traditional solutions and works well for the bag-of-features based medical image retrieval tasks.

Modeling multiple visual words assignment for bag-of-features based medical image retrieval

KAUST Repository

Wang, Jim Jing-Yan; Almasri, Islam

2012-01-01

In this paper, we investigate the bag-of-features based medical image retrieval methods, which represent an image as a collection of local features, such as image patch and key points with SIFT descriptor. To improve the bag-of-features method, we first model the assignment of local descriptor as contribution functions, and then propose a new multiple assignment strategy. By assuming the local feature can be reconstructed by its neighboring visual words in vocabulary, we solve the reconstruction weights as a QP problem and then use the solved weights as contribution functions, which results in a new assignment method called the QP assignment. We carry our experiments on ImageCLEFmed datasets. Experiments' results show that our proposed method exceeds the performances of traditional solutions and works well for the bag-of-features based medical image retrieval tasks.

Changes in the infrared microspectroscopic characteristics of DNA caused by cationic elements, different base richness and single-stranded form.

Directory of Open Access Journals (Sweden)

Maria Luiza S Mello

Full Text Available BACKGROUND: The infrared (IR analysis of dried samples of DNA and DNA-polypeptide complexes is still scarce. Here we have studied the FT-IR profiles of these components to further the understanding of the FT-IR signatures of chromatin and cell nuclei. METHODOLOGY/PRINCIPAL FINDINGS: Calf thymus and salmon testis DNA, and complexes of histone H1, protamine, poly-L-lysine and poly-L-arginine (histone-mimic macromolecules with DNA were analyzed in an IR microspectroscope equipped with an attenuated total reflection diamond objective and Grams software. Conditions including polypeptides bound to the DNA, DNA base composition, and single-stranded form were found to differently affect the vibrational characteristics of the chemical groups (especially, PO(2(- in the nucleic acid. The antisymmetric stretching (ν(as of the DNA PO(2(- was greater than the symmetric stretching (ν(s of these groups and increased in the polypeptide-DNA complexes. A shift of the ν(as of the DNA PO(2(- to a lower frequency and an increased intensity of this vibration were induced especially by lysine-rich histones. Lysine richness additionally contributed to an increase in the vibrational stretching of the amide I group. Even in simple molecules such as inorganic phosphates, the vibrational characteristics of the phosphate anions were differently affected by different cations. As a result of the optimization of the DNA conformation by binding to arginine-rich polypeptides, enhancements of the vibrational characteristics in the FT-IR fingerprint could be detected. Although different profiles were obtained for the DNA with different base compositions, this situation was no longer verified in the polypeptide-DNA complexes and most likely in isolated chromatin or cell nuclei. However, the ν(as PO(2(-/ν(s PO(2(- ratio could discriminate DNA with different base compositions and DNA in a single-stranded form. CONCLUSIONS/SIGNIFICANCE: FT-IR spectral profiles are a valuable tool

Characterizing Sailor and Command Enlisted Placement and Assignment Preferences

National Research Council Canada - National Science Library

Butler, Virginia

2002-01-01

.... DON currently matches sailors to billets using a labor-intensive detailing process. With evolving information technology, the assignment process could be accomplished using intelligent agents and web-based markets...

The Advantages of Single-Sex Education

Science.gov (United States)

Hughes, Teresa A.

2006-01-01

Traditionally, single-sex education has been provided in the form of private schooling. Title IX regulations have loosened as a result of the No Child Left Behind Legislation; therefore, public school districts now have the legal right to create single-sex classes or single-sex schools if they deem it to be in the best interest of their students.…

Stereospecific assignment of the asparagine and glutamine sidechain amide protons in proteins from chemical shift analysis

Energy Technology Data Exchange (ETDEWEB)

Harsch, Tobias; Schneider, Philipp; Kieninger, Bärbel; Donaubauer, Harald; Kalbitzer, Hans Robert, E-mail: hans-robert.kalbitzer@biologie.uni-regensburg.de [University of Regensburg, Institute of Biophysics and Physical Biochemistry and Centre of Magnetic Resonance in Chemistry and Biomedicine (Germany)

2017-02-15

Side chain amide protons of asparagine and glutamine residues in random-coil peptides are characterized by large chemical shift differences and can be stereospecifically assigned on the basis of their chemical shift values only. The bimodal chemical shift distributions stored in the biological magnetic resonance data bank (BMRB) do not allow such an assignment. However, an analysis of the BMRB shows, that a substantial part of all stored stereospecific assignments is not correct. We show here that in most cases stereospecific assignment can also be done for folded proteins using an unbiased artificial chemical shift data base (UACSB). For a separation of the chemical shifts of the two amide resonance lines with differences ≥0.40 ppm for asparagine and differences ≥0.42 ppm for glutamine, the downfield shifted resonance lines can be assigned to H{sup δ21} and H{sup ε21}, respectively, at a confidence level >95%. A classifier derived from UASCB can also be used to correct the BMRB data. The program tool AssignmentChecker implemented in AUREMOL calculates the Bayesian probability for a given stereospecific assignment and automatically corrects the assignments for a given list of chemical shifts.

An Ultimatum Game Approach to Billet Assignments

Science.gov (United States)

2015-09-01

time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed , and completing and reviewing this...treatments are needed for this investigation. To conserve the subject pool and meet the budget, we elected to pursue treatments that covered salient...across billets can be partially offset through compensating wages ( hedonic wages) and/or the potential of future superior assignments. In the

Mining Staff Assignment Rules from Event-Based Data