Risk transfer via energy-savings insurance

International Nuclear Information System (INIS)

Mills, Evan

2003-01-01

Among the key barriers to investment in energy efficiency are uncertainties about attaining projected energy savings and potential disputes over stipulated savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building diagnostics and commissioning), financial methods are less developed in the energy management arena than in other segments of the economy. Energy-savings insurance (ESI) - formal insurance of predicted energy savings - transfers and spreads both types of risk over a larger pool of energy efficiency projects and reduces barriers to market entry of smaller energy service firms who lack sufficiently strong balance sheets to self-insure the savings. ESI encourages those implementing energy-saving projects to go beyond standard measures and thereby achieve more significant levels of energy savings. Insurance providers are proponents of improved savings measurement and verification techniques, as well as maintenance, thereby contributing to national energy-saving objectives. If properly applied, ESI can potentially reduce the net cost of energy-saving projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Governmental agencies have been pioneers in the use of ESI and could continue to play a role

The Economic Impact of Weight Regain

OpenAIRE

Sheppard, Caroline E.; Lester, Erica L. W.; Chuck, Anderson W.; Birch, Daniel W.; Karmali, Shahzeer; de Gara, Christopher J.

2013-01-01

Background. Obesity is well known for being associated with significant economic repercussions. Bariatric surgery is the only evidence-based solution to this problem as well as a cost-effective method of addressing the concern. Numerous authors have calculated the cost effectiveness and cost savings of bariatric surgery; however, to date the economic impact of weight regain as a component of overall cost has not been addressed. Methods. The literature search was conducted to elucidate the dir...

Risk transfer via energy savings insurance

Energy Technology Data Exchange (ETDEWEB)

Mills, Evan

2001-10-01

Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of the economy. Energy Savings Insurance (ESI) - formal insurance of predicted energy savings - is one method of transferring financial risks away from the facility owner or energy services contractor. ESI offers a number of significant advantages over other forms of financial risk transfer, e.g. savings guarantees or performance bonds. ESI providers manage risk via pre-construction design review as well as post-construction commissioning and measurement and verification of savings. We found that the two mos t common criticisms of ESI - excessive pricing and onerous exclusions - are not born out in practice. In fact, if properly applied, ESI can potentially reduce the net cost of energy savings projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Debt service can also be ensured by matching loan payments to projected energy savings while designing the insurance mechanism so that payments are made by the insurer in the event of a savings shortfall. We estimate the U.S. ESI market potential of $875 million/year in premium income. From an energy-policy perspective, ESI offers a number of potential benefits: ESI transfers performance risk from the balance sheet of the entity implementing the energy savings project, thereby freeing up capital otherwise needed to ''self-insure'' the savings. ESI reduces barriers to market entry of smaller energy services firms who do not have sufficiently strong balance

Refrigeration: Introducing energy saving opportunities for business

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-04-15

In some industries, most notably food and drink and chemicals, refrigeration accounts for a significant proportion of overall site energy costs. For instance, in the industrial handling of meat, poultry and fish, it often accounts for 50% of total energy costs. In ice-cream production the proportion is 70%. In a number of commercial sectors, refrigeration also represents a significant proportion of overall energy costs. For example: Cold storage 90%; Food supermarkets 50%; Small shops with refrigerated cabinets 70% or over; Pubs and clubs 30%. Against these high costs, even a small reduction in refrigeration energy use can offer significant cost savings, resulting in increased profits. Energy saving need not be expensive. Energy savings of up to 20% can be realised in many refrigeration plant through actions that require little or no investment. In addition, improving the efficiency and reducing the load on a refrigeration plant can improve reliability and reduce the likelihood of a breakdown. Most organisations can save energy and money on refrigeration by: More efficient equipment; Good maintenance; Housekeeping and control. This publication provides an understanding of the operation of refrigeration systems, identifies where savings can be realised and will enable readers to present an informed case on energy savings to key decision makers within their organisation. (GB)

Energy savings potential from improved building controls for the US commercial building sector

Energy Technology Data Exchange (ETDEWEB)

Fernandez, Nick; Katipamula, Srinivas; Wang, Weimin; Xie, Yulong; Zhao, Mingjie

2017-09-27

The U.S. Department of Energy’s (DOE’s) Building Technologies Office (BTO) sponsored a study to determine the potential national savings achievable in the commercial building sector through widespread deployment of best practice controls, elimination of system and component faults, and use of better sensing. Detailed characterization of potential savings was one source of input to set research, development, and deployment (RD&D) goals in the field of building sensors and controls. DOE’s building energy simulation software, EnergyPlus, was employed to estimate the potential savings from 34 measures in 9 building types and across 16 climates representing almost 57% of commercial building sector energy consumption. In addition to estimating savings from individual measures, three packages of measures were created to estimate savings from the packages. These packages represented an 1) efficient building, 2) typical building, and 3) inefficient building. To scale the results from individual measures or a package to the national scale, building weights by building type and climate locations from the Energy Information Administration’s 2012 Commercial Building Energy Consumption Survey (CBECS) were used. The results showed significant potential for energy savings across all building types and climates. The total site potential savings from individual measures by building type and climate location ranged between 0% and 25%. The total site potential savings by building type aggregated across all climates (using the CBECS building weights) for each measure varied between 0% and 16%. The total site potential savings aggregated across all building types and climates for each measure varied between 0% and 11%. Some individual measures had negative savings because correcting underlying operational problems (e.g., inadequate ventilation) resulted in increased energy consumption. When combined into packages, the overall national savings potential is estimated to be 29

Entrepreneurial saving practices and reinvestment : Theory and evidence

NARCIS (Netherlands)

Beck, T.H.L.; Pamuk, Haki; Uras, Burak

2017-01-01

We use a novel enterprise survey to gauge the relationship between saving instruments and entrepreneurial reinvestment. We show that while most informal saving practices are not associated with a lower likelihood of reinvestment when compared with formal saving practices, there is a significantly

Evaluating energy saving system of data centers based on AHP and fuzzy comprehensive evaluation model

Science.gov (United States)

Jiang, Yingni

2018-03-01

Due to the high energy consumption of communication, energy saving of data centers must be enforced. But the lack of evaluation mechanisms has restrained the process on energy saving construction of data centers. In this paper, energy saving evaluation index system of data centers was constructed on the basis of clarifying the influence factors. Based on the evaluation index system, analytical hierarchy process was used to determine the weights of the evaluation indexes. Subsequently, a three-grade fuzzy comprehensive evaluation model was constructed to evaluate the energy saving system of data centers.

Household Savings

DEFF Research Database (Denmark)

Browning, Martin; Lusardi, Annamaria

suggested in the informal saving literature can be captured in the standard optimizing model. Particular attention is given to recent work on the precautionary motive and its implications for saving and consumption behavior. We also discuss the "behavioral" or "psychological" approach that eschews the use......In this survey, we review the recent theoretical and empirical literature on household saving and consumption. The discussion is structured around a list of motives for saving and how well the standard theory captures these motives. We show that almost all of the motives for saving that have been...

Casual relationship between gross domestic saving and economic ...

African Journals Online (AJOL)

The empirical study confirmed that a significant relationship between domestic savings and ... and, which ultimately increases the country domestic saving level. ... which increase saving and investment into the country due to its dual effect. ... South Africa (96); South Sudan (1); Sudan (3); Swaziland (3); Tanzania (19); Togo ...

Saving in cycles: how to get people to save more money.

Science.gov (United States)

Tam, Leona; Dholakia, Utpal

2014-02-01

Low personal savings rates are an important social issue in the United States. We propose and test one particular method to get people to save more money that is based on the cyclical time orientation. In contrast to conventional, popular methods that encourage individuals to ignore past mistakes, focus on the future, and set goals to save money, our proposed method frames the savings task in cyclical terms, emphasizing the present. Across the studies, individuals who used our proposed cyclical savings method, compared with individuals who used a linear savings method, provided an average of 74% higher savings estimates and saved an average of 78% more money. We also found that the cyclical savings method was more efficacious because it increased implementation planning and lowered future optimism regarding saving money.

Risk transfer via energy savings insurance; TOPICAL

International Nuclear Information System (INIS)

Mills, Evan

2001-01-01

Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of the economy. Energy Savings Insurance (ESI) - formal insurance of predicted energy savings - is one method of transferring financial risks away from the facility owner or energy services contractor. ESI offers a number of significant advantages over other forms of financial risk transfer, e.g. savings guarantees or performance bonds. ESI providers manage risk via pre-construction design review as well as post-construction commissioning and measurement and verification of savings. We found that the two mos t common criticisms of ESI - excessive pricing and onerous exclusions - are not born out in practice. In fact, if properly applied, ESI can potentially reduce the net cost of energy savings projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Debt service can also be ensured by matching loan payments to projected energy savings while designing the insurance mechanism so that payments are made by the insurer in the event of a savings shortfall. We estimate the U.S. ESI market potential of$875 million/year in premium income. From an energy-policy perspective, ESI offers a number of potential benefits: ESI transfers performance risk from the balance sheet of the entity implementing the energy savings project, thereby freeing up capital otherwise needed to ''self-insure'' the savings. ESI reduces barriers to market entry of smaller energy services firms who do not have sufficiently strong balance sheets to self

The significance of diffusion weighted imaging for the diagnosis of pyogenic ventriculitis

Energy Technology Data Exchange (ETDEWEB)

Ihn, Yon Kwon; Hwang, Seong Su [College of Medicine, The Catholic University of Korea, Suwon (Korea, Republic of); Kim, Tae You [Willis Hospital, Seoul (Korea, Republic of)

2007-08-15

To evaluate the significance of diffusion weighted imaging (DWI) for the diagnosis of pyogenic ventriculitis. In this retrospective study, 9 patients with pyogenic ventricultis underwent a set of imaging sequences that included DWI, T1-and T2-weighted imaging. FLAIR and enhanced T1 weighted imaging. DWI consisted of an axial single shot spine echo EPI pulse sequence with b values of 0 and 1000 sec/mm{sup 2}. We evaluated the presence and signal intensity of ventricular debris, hydrocephalus, periventricular signal abnormality, and ependymal enhancement. The apparent diffusion coffiecient values of ventricular debris and cortical gray matter were calculated from the ADC map. In all patients, ventricular debris was hyperintense on the DWIs. A periventricular hyperintense signal was present in all cases on FLAIR and T2WI. Ependymal enhancement was detected in eight (89%) of 9 cases. A hydrocephalus was observed in 6 (67%) of 9 cases. The mean ADC value of ventricular debris was 0.735 {+-} 0.117 (10{sup -3} mm{sup 2}/sec). These ADC values were significantly lower than those for cortical gray matter (1.052 {+-} 0.149 (10{sup -3} mm{sup 2}/sec)). Ventricular debris was most conspicuous findings of ventriculitis on DWI. Areas of intraventricular hyperintensity on DWI corresponded to the decreased ADC values.

Estimating the cost of saving electricity through U.S. utility customer-funded energy efficiency programs

International Nuclear Information System (INIS)

Hoffman, Ian M.; Goldman, Charles A.; Rybka, Gregory; Leventis, Greg; Schwartz, Lisa; Sanstad, Alan H.; Schiller, Steven

2017-01-01

The program administrator and total cost of saved energy allow comparison of the cost of efficiency across utilities, states, and program types, and can identify potential performance improvements. Comparing program administrator cost with the total cost of saved energy can indicate the degree to which programs leverage investment by participants. Based on reported total costs and savings information for U.S. utility efficiency programs from 2009 to 2013, we estimate the savings-weighted average total cost of saved electricity across 20 states at $0.046 per kilowatt-hour (kW h), comparing favorably with energy supply costs and retail rates. Programs targeted on the residential market averaged $0.030 per kW h compared to $0.053 per kW h for non-residential programs. Lighting programs, with an average total cost of $0.018 per kW h, drove lower savings costs in the residential market. We provide estimates for the most common program types and find that program administrators and participants on average are splitting the costs of efficiency in half. More consistent, standardized and complete reporting on efficiency programs is needed. Differing definitions and quantification of costs, savings and savings lifetimes pose challenges for comparing program results. Reducing these uncertainties could increase confidence in efficiency as a resource among planners and policymakers. - Highlights: • The cost of saved energy allows comparisons among energy resource investments. • Findings from the most expansive collection yet of total energy efficiency program costs. • The weighted average total cost of saved electricity was $0.046 for 20 states in 2009–2013. • Averages in the residential and non-residential sectors were $0.030 and $0.053 per kW h, respectively. • Results strongly indicate need for more consistent, reliable and complete reporting on efficiency programs.

The Economic Impact of Weight Regain

Directory of Open Access Journals (Sweden)

Caroline E. Sheppard

2013-01-01

Full Text Available Background. Obesity is well known for being associated with significant economic repercussions. Bariatric surgery is the only evidence-based solution to this problem as well as a cost-effective method of addressing the concern. Numerous authors have calculated the cost effectiveness and cost savings of bariatric surgery; however, to date the economic impact of weight regain as a component of overall cost has not been addressed. Methods. The literature search was conducted to elucidate the direct costs of obesity and primary bariatric surgery, the rate of weight recidivism and surgical revision, and any costs therein. Results. The quoted cost of obesity in Canada was $2.0 billion–$6.7 billion in 2013 CAD. The median percentage of bariatric procedures that fail due to weight gain or insufficient weight loss is 20% (average: 21.1%±10.1%, range: 5.2–39, n=10. Revision of primary surgeries on average ranges from 2.5% to 18.4%, and depending on the procedure accounts for an additional cost between $14,000 and $50,000 USD per patient. Discussion. There was a significant deficit of the literature pertaining to the cost of revision surgery as compared with primary bariatric surgery. As such, the cycle of weight recidivism and bariatric revisions has not as of yet been introduced into any previous cost analysis of bariatric surgery.

Prognostic significance of unintentional body weight loss in colon cancer patients.

Science.gov (United States)

Kuo, Yi-Hung; Shi, Chung-Sheng; Huang, Cheng Yi; Huang, Yun-Ching; Chin, Chih-Chien

2018-04-01

The aim of the present study was to investigate whether unintentional body weight loss (BWL) provides additional clinical information in terms of tumor progression and prognosis in non-metastatic colon cancer. In the present study, a total of 2,406 consecutive colon cancer patients without metastasis were retrospectively enrolled. Unintentional BWL was defined as loss of >5% of body weight within the last 6-12 months, or defined subjectively upon fulfillment of at least two of the following: Evidence of change in clothing size and corroboration of the reported weight loss by family or friend. This category was recorded as present ('with') or absent ('without'). Logistic regression analysis was performed to determine the correlation between BWL and the tumor characteristics and post-operative outcomes of patients with colon cancer. The Cox regression model was used to determine the association of BWL with long-term survival of colon cancer patients. A significant association between BWL and tumor location [right vs. left: Odds ratio (OR)=1.62; Pcolon cancer is not just a symptom, but it is also correlated with tumor location, size and depth, and is a prognostic factor for poor outcomes including overall survival and tumor relapse.

Weight savings in aerospace vehicles through propellant scavenging

Science.gov (United States)

Schneider, Steven J.; Reed, Brian D.

1988-01-01

Vehicle payload benefits of scavenging hydrogen and oxygen propellants are addressed. The approach used is to select a vehicle and a mission and then select a scavenging system for detailed weight analysis. The Shuttle 2 vehicle on a Space Station rendezvous mission was chosen for study. The propellant scavenging system scavenges liquid hydrogen and liquid oxygen from the launch propulsion tankage during orbital maneuvers and stores them in well insulated liquid accumulators for use in a cryogenic auxiliary propulsion system. The fraction of auxiliary propulsion propellant which may be scavenged for propulsive purposes is estimated to be 45.1 percent. The auxiliary propulsion subsystem dry mass, including the proposed scavenging system, an additional 20 percent for secondary structure, an additional 5 percent for electrical service, a 10 percent weight growth margin, and 15.4 percent propellant reserves and residuals is estimated to be 6331 kg. This study shows that the fraction of the on-orbit vehicle mass required by the auxiliary propulsion system of this Shuttle 2 vehicle using this technology is estimated to be 12.0 percent compared to 19.9 percent for a vehicle with an earth-storable bipropellant system. This results in a vehicle with the capability of delivering an additional 7820 kg to the Space Station.

Weight savings in aerospace vehicles through propellant scavenging

Science.gov (United States)

Schneider, Steven J.; Reed, Brian D.

1988-05-01

Vehicle payload benefits of scavenging hydrogen and oxygen propellants are addressed. The approach used is to select a vehicle and a mission and then select a scavenging system for detailed weight analysis. The Shuttle 2 vehicle on a Space Station rendezvous mission was chosen for study. The propellant scavenging system scavenges liquid hydrogen and liquid oxygen from the launch propulsion tankage during orbital maneuvers and stores them in well insulated liquid accumulators for use in a cryogenic auxiliary propulsion system. The fraction of auxiliary propulsion propellant which may be scavenged for propulsive purposes is estimated to be 45.1 percent. The auxiliary propulsion subsystem dry mass, including the proposed scavenging system, an additional 20 percent for secondary structure, an additional 5 percent for electrical service, a 10 percent weight growth margin, and 15.4 percent propellant reserves and residuals is estimated to be 6331 kg. This study shows that the fraction of the on-orbit vehicle mass required by the auxiliary propulsion system of this Shuttle 2 vehicle using this technology is estimated to be 12.0 percent compared to 19.9 percent for a vehicle with an earth-storable bipropellant system. This results in a vehicle with the capability of delivering an additional 7820 kg to the Space Station.

MRI estimation of total renal volume demonstrates significant association with healthy donor weight

International Nuclear Information System (INIS)

Cohen, Emil I.; Kelly, Sarah A.; Edye, Michael; Mitty, Harold A.; Bromberg, Jonathan S.

2009-01-01

Purpose: The purpose of this study was to correlate total renal volume (TRV) calculations, obtained through the voxel-count method and ellipsoid formula with various physical characteristics. Materials and methods: MRI reports and physical examination from 210 healthy kidney donors (420 kidneys), on whom renal volumes were obtained using the voxel-count method, were retrospectively reviewed. These values along with ones obtained through a more traditional method (ellipsoid formula) were correlated with subject height, body weight, body mass index (BMI), and age. Results: TRV correlated strongly with body weight (r = 0.7) and to a lesser degree with height, age, or BMI (r = 0.5, -0.2, 0.3, respectively). The left kidney volume was greater than the right, on average (p < 0.001). The ellipsoid formula method over-estimated renal volume by 17% on average which was significant (p < 0.001). Conclusions: Body weight was the physical characteristic which demonstrated the strongest correlation with renal volume in healthy subjects. Given this finding, a formula was derived for estimating the TRV for a given patient based on the his or her weight: TRV = 2.96 x weight (kg) + 113 ± 64.

Private Sector Savings

Directory of Open Access Journals (Sweden)

Pitonáková Renáta

2018-03-01

Full Text Available The majority of household savings are in the form of bank deposits. It is therefore of interest for credit institutions to tailor their deposit policy for getting finances from non-banking entities and to provide the private sector with the loans that are necessary for investment activities and consumption. This paper deals with the determinants of the saving rate of the private sector of Slovakia. Economic, financial and demographic variables influence savings. Growth of income per capita, private disposable income, elderly dependency ratio, real interest rate and inflation have a positive impact on savings, while increases in public savings indicate a crowding out effect. The inflation rate implies precautionary savings, and dependency ratio savings for bequest. There are also implications for governing institutions deciding on the implementation of appropriate fiscal and monetary operations.

Does Daylight Saving Save Energy? A Meta-Analysis

OpenAIRE

Havránek, Tomáš; Herman, Dominik; Irsova, Zuzana

2016-01-01

The original rationale for adopting daylight saving time (DST) was energy savings. Modern research studies, however, question the magnitude and even direction of the effect of DST on energy consumption. Representing the first meta-analysis in this literature, we collect 162 estimates from 44 studies and find that the mean reported estimate indicates modest energy savings: 0.34% during the days when DST applies. The literature is not affected by publication bias, but the results vary systemati...

Vegetable output and cost savings of community gardens in San Jose, California.

Science.gov (United States)

Algert, Susan J; Baameur, Aziz; Renvall, Marian J

2014-07-01

Urban dwellers across the United States increasingly access a variety of fresh vegetables through participation in neighborhood-level community gardens. Here we document vegetable output and cost savings of community gardens in the city of San Jose, CA, to better understand the capacity of community gardens to affect food affordability in an urban setting. A convenience sample of 83 community gardeners in San Jose completed a background survey during spring and summer 2012. On average, gardeners were aged 57 years and had a monthly income of $4,900; 25% had completed college. A representative subset of 10 gardeners was recruited to weigh vegetable output of their plots using portable electronic scales at three separate garden sites. Accuracy of each portable scale was verified by comparing the weight of a sample vegetable to weights obtained using a lab scale precise to 0.2 oz. Garden yields and cost savings were tabulated overall for each plot. Results indicate that community garden practices are more similar to biointensive high-production farming, producing 0.75 lb vegetables/sq ft, rather than conventional agricultural practices, producing 0.60 lb/sq ft. Gardens produced on average 2.55 lb/plant and saved $435 per plot for the season. Results indicate that cost savings are greatest if vertical high value crops such as tomatoes and peppers are grown in community gardens, although yields depend on growing conditions, gardener's skill, availability of water, and other factors. Future research is needed to document cost savings and yields for specific crops grown in community gardens. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Implementation of energy-saving policies in China: How local governments assisted industrial enterprises in achieving energy-saving targets

International Nuclear Information System (INIS)

Zhao, Xiaofan; Li, Huimin; Wu, Liang; Qi, Ye

2014-01-01

Local governments have replaced the national ministries that are in charge of various industries to become the primary implementer of energy-saving policies in China since 2000. This paper employs a case study-based approach to demonstrate the significance of local governments’ policy measures in assisting industrial enterprises with energy-saving activities in China. Based on the longitudinal case of the Jasmine Thermal Electric Power Company, this paper hypothesizes that sub-national governments have played a major role in implementing energy-saving policies in China since the 11th Five-year-plan period. A wide range of provincial and municipal agencies collaborated in implementing five types of policy measures – informational policy, skill building, improved enforcement of central directives, price adjustment, and funding – that reduced barriers to energy saving and motivated active pursuit of energy-saving activities at industrial enterprises. The case study demonstrates how an enterprise and local governments work together to achieve the enterprise's energy-saving target. The authors will investigate the hypothesis of this paper in the context of multiple case studies that they plan to undertake in the future. - Highlights: • We employ a case study-based approach to study policy implementation in China. • Local governments have played a major role in implementing energy-saving policies. • Local public agencies collaborated in implementing five types of policy measures. • Local policy measures reduced barriers to energy saving at industrial enterprises. • Enterprises and local governments work together to achieve energy-saving targets

Energy conservation. Federal shared energy savings contracting

International Nuclear Information System (INIS)

Fultz, Keith O.; Milans, Flora H.; Kirk, Roy J.; Welker, Robert A.; Sparling, William J.; Butler, Sharon E.; Irwin, Susan W.

1989-04-01

A number of impediments have discouraged federal agencies from using shared energy savings contracts. As of November 30, 1988, only two federal agencies - the U.S. Postal Service (USPS) and the Department of the Army -had awarded such contracts even though they can yield significant energy and cost savings. The three major impediments we identified were uncertainty about the applicability of a particular procurement policy and practice, lack of management incentives, and difficulty in measuring energy and cost savings. To address the first impediment, the Department of Energy (DOE) developed a manual on shared energy savings contracting. The second impediment was addressed when the 100th Congress authorized incentives for federal agencies to enter into shared savings contracts. DOE addressed the third impediment by developing a methodology for calculating energy consumption and cost savings. However, because of differing methodological preferences, this issue will need to be addressed on a contract-by-contract basis. Some state governments and private sector firms are using performance contracts to reduce energy costs in their buildings and facilities. We were able to identify six states that were using performance contracts. Five have established programs, and all six states have projects under contract. The seven energy service companies we contacted indicated interest in federal shared energy savings contracting

Our School Wellness Program Cut Staff Absenteeism and Might Save Lives.

Science.gov (United States)

Oxrieder, Ann

1987-01-01

Describes Bellevue (Washington) School District's employee wellness program's successful efforts to (1) save lives by promoting healthy lifestyles, (2) boost morale by taking health services to the workplace, (3) improve on-the-job performance by providing inexpensive, convenient opportunities for exercise and weight loss, and (4) reduce staff…

Caustic saving potentile in textile processing mills

International Nuclear Information System (INIS)

Latif, M.; Rehman, A.; Ghafar, A.; Hafeez, N.M.

2010-01-01

The textile processing industry of pakistan has great potential of improvement in resource consumption in various production processes. One major concern is the heavy usage of caustic soda (sodium hydroxide) especially during the mercerization process which incurs a significant cost to a textile processing mill. To reduce the unit fabric production cost and stay competitive, the industry need to minimize the caustic wastage and explore the caustic saving potential. This paper describe the detailed caustic consumption practices and saving potentials in woven textile sector based on the data base of 100 industries. Region wise caustic saving potential is also investigated . Three caustic conservation option including process improvement, reuse and recycling, and caustic recovery plants are discussed. Detailed technical and and financial requirements. saving potentials and paybacks of these options are provided. (author)

Weighting Factors for the Commercial Building Prototypes Used in the Development of ANSI/ASHRAE/IESNA Standard 90.1-2010

Energy Technology Data Exchange (ETDEWEB)

Jarnagin, Ronald E.; Bandyopadhyay, Gopal K.

2010-01-21

Detailed construction data from the McGraw Hill Construction Database was used to develop construction weights by climate zones for use with DOE Benchmark Buildings and for the ASHRAE Standard 90.1-2010 development. These construction weights were applied to energy savings estimates from simulation of the benchmark buildings to establish weighted national energy savings.

Significance of Initial Maternal Hemoglobin Concentration during Pregnancy in Birth Weight and Preterm Delivery in Sri Lanka

International Nuclear Information System (INIS)

Athambawa, Mohamed Razmy

2014-01-01

Full text: Anemia in pregnant women continues to be a major health problem in many developing countries such as Sri Lanka and more than half of the pregnant women in the world have hemoglobin (Hb) concentration levels indicative of anemia. Anemia diagnosed early in pregnancy is associated with increased risks of low birth weight (LBW) and preterm delivery where as in some studies the association between anemia and outcomes is in reversed direction especially at the last stage of pregnancy. LBW and preterm delivery are closely associated with foetal and neonatal mortality and morbidity, inhibited growth and cognitive development and chronic diseases later in life. The provision of iron supplements to pregnant women throughout the pregnancy period is one of the most widely practiced public health measures in Sri Lanka. However the supplementation of routine iron during pregnancy, regardless of whether the mother is anemic, has been debated extensively. In this study 3,867 pregnant women in Sri Lanka were followed to find the significance of initial maternal Hb concentration during pregnancy in birth weight and preterm delivery. The relative risks were estimated using linear logistic models. Among the mothers observed 1.1 % and 16 % were in severe anemic and anemic conditions respectively. The average birth weight of 2454.7 g was observed for the severe anemic mothers which was 522.3 g significantly less compare to the average birth weight given by the rests of the mothers (P 125 g/L) level of initial maternal Hb concentration. Severe anemic mothers had significantly very less weight gain of 6.30 Kg (P < 0.001) and had 3.0 – 8.1 fold higher relative risk of preterm delivery compare to the mothers with normal initial Hb concentration. No significant differences in weight gain and risk of preterm delivery were observed among the mothers with normal initial Hb concentration, anemic and excess initial Hb concentration (P = 0.176, 0148) This study provides substantial

Energy Savings Lifetimes and Persistence

Energy Technology Data Exchange (ETDEWEB)

Hoffman, Ian M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Todd, Annika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Billingsley, Megan A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goldman, Charles A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-02-01

This technical brief explains the concepts of energy savings lifetimes and savings persistence and discusses how program administrators use these factors to calculate savings for efficiency measures, programs and portfolios. Savings lifetime is the length of time that one or more energy efficiency measures or activities save energy, and savings persistence is the change in savings throughout the functional life of a given efficiency measure or activity. Savings lifetimes are essential for assessing the lifecycle benefits and cost effectiveness of efficiency activities and for forecasting loads in resource planning. The brief also provides estimates of savings lifetimes derived from a national collection of costs and savings for electric efficiency programs and portfolios.

Spending to save

DEFF Research Database (Denmark)

Larsen, Anders

2013-01-01

the energy distribution companies meet their overall saving obligation, the net savings impact are about a third of the savings reported by the obligated parties. Further it was found that while energy savings in the public and business sector have a high net impact, some subsidies given under the EEO...... perspective. The evaluation has resulted in noticeable adjustments of the design of the Danish EEO, e.g. introduction of a 1 year payback-time limit for projects receiving subsidies, a minimum baseline for insulation products, and specification of documentation requirements....

A pilot weight reduction program over one year significantly reduced DNA strand breaks in obese subjects

Directory of Open Access Journals (Sweden)

Karl-Heinz Wagner

2015-05-01

Conclusion: A sustainable lifestyle change under supervision including physical activity and diet quality over a period of one year was not only responsible to reduce body weight and BMI but also led to significant reduction in all parameters of the comet assay. These results underline the importance of body weight reduction and highlight the positive changes in DNA stability.

Valuation of Travel Time Savings in Viewpoint of WTA

Science.gov (United States)

Shao, Chang-qiao; Liu, Yang; Liu, Xiao-ming

2014-01-01

In order to investigate the issues in measurement of value of travel time savings (VTTS), the willingness-to-accept (WTA) for the private car owner is studied by using surveyed data. It is convincing that trip purpose, trip length, time savings, cost savings, income, and allowance from employee have effects on the WTA. Moreover, influences of these variables are not the same for different trip purposes. For commuting trips, effects of income and allowance from employee are significant while time savings and cost savings are dominated for leisure and shopping trips. It is also found that WTA is much higher than expected which implies that there are a group of drivers who are not prone to switching to other trip modes other than passenger car. PMID:25530751

Valuation of travel time savings in viewpoint of WTA.

Science.gov (United States)

Shao, Chang-Qiao; Liu, Yang; Liu, Xiao-Ming

2014-01-01

In order to investigate the issues in measurement of value of travel time savings (VTTS), the willingness-to-accept (WTA) for the private car owner is studied by using surveyed data. It is convincing that trip purpose, trip length, time savings, cost savings, income, and allowance from employee have effects on the WTA. Moreover, influences of these variables are not the same for different trip purposes. For commuting trips, effects of income and allowance from employee are significant while time savings and cost savings are dominated for leisure and shopping trips. It is also found that WTA is much higher than expected which implies that there are a group of drivers who are not prone to switching to other trip modes other than passenger car.

Mission aware energy saving strategies for Army ground vehicles

Science.gov (United States)

Dattathreya, Macam S.

Fuel energy is a basic necessity for this planet and the modern technology to perform many activities on earth. On the other hand, quadrupled automotive vehicle usage by the commercial industry and military has increased fuel consumption. Military readiness of Army ground vehicles is very important for a country to protect its people and resources. Fuel energy is a major requirement for Army ground vehicles. According to a report, a department of defense has spent nearly $13.6 billion on fuel and electricity to conduct ground missions. On the contrary, energy availability on this plant is slowly decreasing. Therefore, saving energy in Army ground vehicles is very important. Army ground vehicles are embedded with numerous electronic systems to conduct missions such as silent and normal stationary surveillance missions. Increasing electrical energy consumption of these systems is influencing higher fuel consumption of the vehicle. To save energy, the vehicles can use any of the existing techniques, but they require complex, expensive, and time consuming implementations. Therefore, cheaper and simpler approaches are required. In addition, the solutions have to save energy according to mission needs and also overcome size and weight constraints of the vehicle. Existing research in the current literature do not have any mission aware approaches to save energy. This dissertation research proposes mission aware online energy saving strategies for stationary Army ground vehicles to save energy as well as to meet the electrical needs of the vehicle during surveillance missions. The research also proposes theoretical models of surveillance missions, fuzzy logic models of engine and alternator efficiency data, and fuzzy logic algorithms. Based on these models, two energy saving strategies are proposed for silent and normal surveillance type of missions. During silent mission, the engine is on and batteries power the systems. During normal surveillance mission, the engine is

Exploring the time-saving bias: How drivers misestimate time saved when increasing speed

Directory of Open Access Journals (Sweden)

Eyal Peer

2010-12-01

Full Text Available According to the time-saving bias, drivers underestimate the time saved when increasing from a low speed and overestimate the time saved when increasing from a relatively high speed. Previous research used a specific type of task --- drivers were asked to estimate time saved when increasing speed and to give a numeric response --- to show this. The present research conducted two studies with multiple questions to show that the time-saving bias occurs in other tasks. Study 1 found that drivers committed the time-saving bias when asked to estimate (a the time saved when increasing speed or (b the distance that can be completed at a given time when increasing speed or (c the speed required to complete a given distance in decreasing times. Study 2 showed no major differences in estimations of time saved compared to estimations of the remaining journey time and also between responses given on a numeric scale versus a visual analog scale. Study 3 tested two possible explanations for the time-saving bias: a Proportion heuristic and a Differences heuristic. Some evidence was found for use of the latter.

Saving Money and Time with Virtual Server

CERN Document Server

Sanders, Chris

2006-01-01

Microsoft Virtual Server 2005 consistently proves to be worth its weight in gold, with new implementations thought up every day. With this product now a free download from Microsoft, scores of new users are able to experience what the power of virtualization can do for their networks. This guide is aimed at network administrators who are interested in ways that Virtual Server 2005 can be implemented in their organizations in order to save money and increase network productivity. It contains information on setting up a virtual network, virtual consolidation, virtual security, virtual honeypo

Paternally expressed, imprinted insulin-like growth factor-2 in chorionic villi correlates significantly with birth weight.

Directory of Open Access Journals (Sweden)

Charalambos Demetriou

Full Text Available Fetal growth involves highly complex molecular pathways. IGF2 is a key paternally expressed growth hormone that is critical for in utero growth in mice. Its role in human fetal growth has remained ambiguous, as it has only been studied in term tissues. Conversely the maternally expressed growth suppressor, PHLDA2, has a significant negative correlation between its term placental expression and birth weight.The aim of this study is to address the role in early gestation of expression of IGF1, IGF2, their receptors IGF1R and IGF2R, and PHLDA2 on term birth weight.Real-time quantitative PCR was used to investigate mRNA expression of IGF1, IGF2, IGF1R, IGF2R and PHLDA2 in chorionic villus samples (CVS (n = 260 collected at 11-13 weeks' gestation. Expression was correlated with term birth weight using statistical package R including correction for several confounding factors.Transcript levels of IGF2 and IGF2R revealed a significant positive correlation with birth weight (0.009 and 0.04, respectively. No effect was observed for IGF1, IGF1R or PHLDA2 and birth weight. Critically, small for gestational age (SGA neonates had significantly lower IGF2 levels than appropriate for gestational age neonates (p = 3.6 × 10(-7.Our findings show that IGF2 mRNA levels at 12 weeks gestation could provide a useful predictor of future fetal growth to term, potentially predicting SGA babies. SGA babies are known to be at a higher risk for type 2 diabetes. This research reveals an imprinted, parentally driven rheostat for in utero growth.

Do Tax Incentives for Saving in Pension Accounts Cause Debt Accumulation?

DEFF Research Database (Denmark)

Yde Andersen, Henrik

2018-01-01

This paper applies a quasi-experimental research design on a Danish 2010 policy that reduced tax incentives for saving in annuity pension schemes to show significant substitution of savings from retirement accounts to gross debt repayments. We find that for every 1 Danish currency unit reduction...... in retirement savings 31 cents goes to debt repayments. Taking into account all types of savings, we find full crowding-out. Consistent with previous findings, we document that the effect is driven by a minority, about 23 percent, who actively rebalance their savings....

Valuation of Travel Time Savings in Viewpoint of WTA

Directory of Open Access Journals (Sweden)

Chang-qiao Shao

2014-01-01

Full Text Available In order to investigate the issues in measurement of value of travel time savings (VTTS, the willingness-to-accept (WTA for the private car owner is studied by using surveyed data. It is convincing that trip purpose, trip length, time savings, cost savings, income, and allowance from employee have effects on the WTA. Moreover, influences of these variables are not the same for different trip purposes. For commuting trips, effects of income and allowance from employee are significant while time savings and cost savings are dominated for leisure and shopping trips. It is also found that WTA is much higher than expected which implies that there are a group of drivers who are not prone to switching to other trip modes other than passenger car.

Weight-related stigma is a significant psychosocial stressor in developing countries: Evidence from Guatemala.

Science.gov (United States)

Hackman, Joseph; Maupin, Jonathan; Brewis, Alexandra A

2016-07-01

Weight-related stigma is established as a major psychosocial stressor and correlate of depression among people living with obesity in high-income countries. Anti-fat beliefs are rapidly globalizing. The goal of the study is to (1) examine how weight-related stigma, enacted as teasing, is evident among women from a lower-income country and (2) test if such weight-related stigma contributes to depressive symptoms. Modeling data for 12,074 reproductive-age women collected in the 2008-2009 Guatemala National Maternal-Infant Health Survey, we demonstrate that weight-related teasing is (1) experienced by those both underweight and overweight, and (2) a significant psychosocial stressor. Effects are comparable to other factors known to influence women's depressive risk in lower-income countries, such as living in poverty, experiencing food insecurity, or suffering sexual/domestic violence. That women's failure to meet local body norms-whether they are overweight or underweight-serves as such a strong source of psychological distress is particularly concerning in settings like Guatemala where high levels of over- and under-nutrition intersect at the household and community level. Current obesity-centric models of weight-related stigma, developed from studies in high-income countries, fail to recognize that being underweight may create similar forms of psychosocial distress in low-income countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

The impact of reducing car weight on global emissions: the future fleet in Great Britain

Science.gov (United States)

Serrenho, André Cabrera; Norman, Jonathan B.; Allwood, Julian M.

2017-05-01

Current European policies define targets for future direct emissions of new car sales that foster a fast transition to electric drivetrain technologies. However, these targets do not consider the emissions produced in electricity generation and material production, and therefore fail to incentivise car manufacturers to consider the benefits of vehicle weight reduction. In this paper, we examine the potential benefits of limiting the average weight and altering the material composition of new cars in terms of global greenhouse gas emissions produced during the use phase, electricity generation and material production. We anticipate the emissions savings for the future car fleet in Great Britain until 2050 for various alternative futures, using a dynamic material flow analysis of ferrous metals and aluminium, and considering an evolving demand for car use. The results suggest that fostering vehicle weight reduction could produce greater cumulative emissions savings by 2050 than those obtained by incentivising a fast transition to electric drivetrains, unless there is an extreme decarbonization of the electricity grid. Savings promoted by weight reduction are immediate and do not depend on the pace of decarbonization of the electricity grid. Weight reduction may produce the greatest savings when mild steel in the car body is replaced with high-strength steel. This article is part of the themed issue 'Material demand reduction'.

Energy saving certificates

International Nuclear Information System (INIS)

2005-11-01

The French ministry of economy, finances and industry and the French agency of environment and energy mastery (Ademe) have organized on November 8, 2005, a colloquium for the presentation of the energy saving certificates, a new tool to oblige the energy suppliers to encourage their clients to make energy savings. This document gathers the transparencies presented at this colloquium about the following topics: state-of-the-art and presentation of the energy saving certificates system: presentation of the EEC system, presentation of the EEC standard operations; the energy saving certificates in Europe today: energy efficiency commitment in UK, Italian white certificate scheme, perspectives of the different European systems. (J.S.)

Suitability assessment of building energy saving technologies for office buildings in cold areas of China based on an assessment framework

International Nuclear Information System (INIS)

Geng, Geng; Wang, Zhaoxia; Zhao, Jing; Zhu, Neng

2015-01-01

Highlights: • An assessment method considering economy, environment and technology is proposed. • Office buildings are classified into 3 types and weights are calculated respectively. • BESTs were summed up as 3 suitability levels. • Recommendations are proposed for adopting in design stage. - Abstract: Blind application and extensive copy of building energy saving technologies have been found very common through investigation in China. Emphases should be put on the suitability assessment when selecting and optimizing building energy saving technologies. This paper created an assessment method, namely an assessment framework to assess the suitability level of building energy saving technologies from a holistic point of view. Fuzzy analytic hierarchy process was adopted. 3 factors and 8 sub-factors were included in the framework. The office buildings were classified into 3 types to calculate weights of factors and sub-factors. The assessment framework was established for each type of office buildings. 20 energy saving technologies from surveyed cases was selected as case study. Ranks of suitability level of the assessment objects were obtained for each type of office buildings. The assessment results could be referred when selecting building energy saving technologies in the design stage

Estimates of Savings Achievable from Irrigation Controller

Energy Technology Data Exchange (ETDEWEB)

Williams, Alison; Fuchs, Heidi; Whitehead, Camilla Dunham

2014-03-28

This paper performs a literature review and meta-analysis of water savings from several types of advanced irrigation controllers: rain sensors (RS), weather-based irrigation controllers (WBIC), and soil moisture sensors (SMS).The purpose of this work is to derive average water savings per controller type, based to the extent possible on all available data. After a preliminary data scrubbing, we utilized a series of analytical filters to develop our best estimate of average savings. We applied filters to remove data that might bias the sample such as data self-reported by manufacturers, data resulting from studies focusing on high-water users, or data presented in a non-comparable format such as based on total household water use instead of outdoor water use. Because the resulting number of studies was too small to be statistically significant when broken down by controller type, this paper represents a survey and synthesis of available data rather than a definitive statement regarding whether the estimated water savings are representative.

Housing-related lifestyle and energy saving: A multi-level approach

International Nuclear Information System (INIS)

Thøgersen, John

2017-01-01

A new instrument for measuring housing-related lifestyle (HRL) is introduced and employed for identifying national and cross-national HRL segments in 10 European countries (N=3190). The identified HRL segments are profiled and the practical importance of HRL for everyday energy-saving efforts in the home and for the energy-consumer's openness to new energy saving opportunities (i.e., energy saving innovativeness) is investigated. The HRL instrument's 71 items load on 16 dimensions within five lifestyle elements. Multi-group confirmatory factor analysis reveals that the instrument possesses metric but not scalar (measurement) invariance across the 10 countries. Multilevel latent class analysis is used to classify participants to HRL segments and the 10 countries into regions with similar segment structure. The optimal solution has seven HRL segments and three country classes, which are profiled in terms of relevant background characteristics. A multivariate GLM analysis reveals that when differences in housing-related lifestyles are controlled, neither country of residence nor the interaction between lifestyle and country of residence influence energy saving innovativeness or everyday energy-saving efforts. However, these two behavioural tendencies vary significantly and substantially between lifestyle segments. The study shows that HRL segmentation is a useful tool for creating more targeted and effective energy-saving campaigns. - Highlights: • 7 housing-related lifestyle segments identified in 10 European countries. • The 10 countries cluster in 3 regions with similar housing-related lifestyle pattern. • Lifestyle segments differ significantly with regard to energy saving efforts. • Lifestyle segments also differ with regard to energy saving innovativeness. • Housing-related lifestyle mediate all effects of country on energy saving.

REMINDER Saved Leave Scheme (SLS) : Transfer of leave to saved leave accounts

CERN Multimedia

HR Division

2002-01-01

Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'*) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that, since last year, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2002 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they are still participants in the schem...

Cost reduction in abdominal CT by weight-adjusted dose.

Science.gov (United States)

Arana, Estanislao; Martí-Bonmatí, Luis; Tobarra, Eva; Sierra, Consuelo

2009-06-01

To analyze the influence of contrast dose adjusted by weight vs. fixed contrast dose in the attenuation and cost of abdominal computed tomography (CT). A randomised, consecutive, parallel group study was conducted in 151 patients (74 men and 77 women, age range 22-67 years), studied with the same CT helical protocol. A dose at 1.75 ml/kg was administered in 101 patients while 50 patients had a fixed dose of 120 ml of same non-ionic contrast material (320 mg/ml). Mean enhancements were measured at right hepatic lobe, superior abdominal aorta and inferior cava vein. Statistical analysis was weight-stratified (81 kg). Aortic attenuation was significantly superior (p61 kg in dose-adjusted group, presented higher hepatic attenuation, being statistically significant in those >81 kg (p80 kg, there was an over cost of euro 10.7 per patient. An injection volume of 1.75 ml/kg offers an optimal diagnostic quality with a global savings of euro 1.34 per patient.

Weight loss significantly reduces serum lipocalin-2 levels in overweight and obese women with polycystic ovary syndrome.

Science.gov (United States)

Koiou, Ekaterini; Tziomalos, Konstantinos; Katsikis, Ilias; Kandaraki, Eleni A; Kalaitzakis, Emmanuil; Delkos, Dimitrios; Vosnakis, Christos; Panidis, Dimitrios

2012-01-01

Serum lipocalin-2 levels are elevated in obese patients. We assessed serum lipocalin-2 levels in polycystic ovary syndrome (PCOS) and the effects of weight loss or metformin on these levels. Forty-seven overweight/obese patients with PCOS [body mass index (BMI) >27 kg/m(2)] were instructed to follow a low-calorie diet, to exercise and were given orlistat or sibutramine for 6 months. Twenty-five normal weight patients with PCOS (BMI weight and 25 overweight/obese healthy female volunteers comprised the control groups. Serum lipocalin-2 levels did not differ between overweight/obese patients with PCOS and overweight/obese controls (p = 0.258), or between normal weight patients with PCOS and normal weight controls (p = 0.878). Lipocalin-2 levels were higher in overweight/obese patients with PCOS than in normal weight patients with PCOS (p weight loss resulted in a fall in lipocalin-2 levels (p weight patients with PCOS, treatment with metformin did not affect lipocalin-2 levels (p = 0.484). In conclusion, PCOS per se is not associated with elevated lipocalin-2 levels. Weight loss induces a significant reduction in lipocalin-2 levels in overweight/obese patients with PCOS.

Measuring industrial energy savings

International Nuclear Information System (INIS)

Kelly Kissock, J.; Eger, Carl

2008-01-01

Accurate measurement of energy savings from industrial energy efficiency projects can reduce uncertainty about the efficacy of the projects, guide the selection of future projects, improve future estimates of expected savings, promote financing of energy efficiency projects through shared-savings agreements, and improve utilization of capital resources. Many efforts to measure industrial energy savings, or simply track progress toward efficiency goals, have had difficulty incorporating changing weather and production, which are frequently major drivers of plant energy use. This paper presents a general method for measuring plant-wide industrial energy savings that takes into account changing weather and production between the pre and post-retrofit periods. In addition, the method can disaggregate savings into components, which provides additional resolution for understanding the effectiveness of individual projects when several projects are implemented together. The method uses multivariable piece-wise regression models to characterize baseline energy use, and disaggregates savings by taking the total derivative of the energy use equation. Although the method incorporates search techniques, multi-variable least-squares regression and calculus, it is easily implemented using data analysis software, and can use readily available temperature, production and utility billing data. This is important, since more complicated methods may be too complex for widespread use. The method is demonstrated using case studies of actual energy assessments. The case studies demonstrate the importance of adjusting for weather and production between the pre- and post-retrofit periods, how plant-wide savings can be disaggregated to evaluate the effectiveness of individual retrofits, how the method can identify the time-dependence of savings, and limitations of engineering models when used to estimate future savings

76 FR 16477 - General Reporting and Recordkeeping by Savings Associations and Savings and Loan Holding Companies

Science.gov (United States)

2011-03-23

... Savings Associations and Savings and Loan Holding Companies AGENCY: Office of Thrift Supervision (OTS...), 12 CFR 562.4 (audit of savings association, savings and loan holding company, or affiliate), 12 CFR... the savings association), 12 CFR 584.1(f) (books and records of each savings and loan holding company...

Acquiring energy savings in manufactured housing

International Nuclear Information System (INIS)

Davey, D.

1993-01-01

In 1991, the Northwest utilities faced a complex situation. They needed new sources of electrical power to avoid future deficits. A significant block of energy savings was available in the manufactured housing sector in the form of energy savings from increased insulation to new manufactured homes. The manufacturers were interested in saving the electricity in the homes, but would only deal with the utility sector as a whole. Half of the homes targeted were sited in investor-owned utility (IOU) service territories, and half in the public sector made up of utilities that purchased some or all of their electricity from the Bonneville Power Administration. Utilities agreed to acquire energy from manufacturers In the form of thermal efficiency measures specified by the Bonneville Power Administration. The program that resulted from over one year of negotiations was called the Manufactured Housing Acquisition Program, or MAP. Manufacturers, the utilities, State Energy Offices, the Northwest Power Planning Council and Bonneville all worked closely and with tenacity to build the program that went into effect on April 1, 1992, and should save the region between 7 and 9 megawatts, enough energy to supply 11,000 homes in the Northwest

Advertising energy saving programs: The potential environmental cost of emphasizing monetary savings.

Science.gov (United States)

Schwartz, Daniel; Bruine de Bruin, Wändi; Fischhoff, Baruch; Lave, Lester

2015-06-01

Many consumers have monetary or environmental motivations for saving energy. Indeed, saving energy produces both monetary benefits, by reducing energy bills, and environmental benefits, by reducing carbon footprints. We examined how consumers' willingness and reasons to enroll in energy-savings programs are affected by whether advertisements emphasize monetary benefits, environmental benefits, or both. From a normative perspective, having 2 noteworthy kinds of benefit should not decrease a program's attractiveness. In contrast, psychological research suggests that adding external incentives to an intrinsically motivating task may backfire. To date, however, it remains unclear whether this is the case when both extrinsic and intrinsic motivations are inherent to the task, as with energy savings, and whether removing explicit mention of extrinsic motivation will reduce its importance. We found that emphasizing a program's monetary benefits reduced participants' willingness to enroll. In addition, participants' explanations about enrollment revealed less attention to environmental concerns when programs emphasized monetary savings, even when environmental savings were also emphasized. We found equal attention to monetary motivations in all conditions, revealing an asymmetric attention to monetary and environmental motives. These results also provide practical guidance regarding the positioning of energy-saving programs: emphasize intrinsic benefits; the extrinsic ones may speak for themselves. (c) 2015 APA, all rights reserved).

Income inequality, status seeking, and savings rates in Canada

Directory of Open Access Journals (Sweden)

Alexander Bilson Darku

2014-12-01

Full Text Available This paper uses Canadian provincial-level data and a variant of James uesenberry’s relative income hypothesis proposed by Frank et al. (2010 to examine the relationship between income inequality and savings rates. The theory predicts that increased expenditure of top income earners leads those just below them in the income scale to spend more as well, then the next group also spends more, and so on. This phenomenon is due to people’s status seeking behaviour. Hence, increased income inequality will trigger increases in consumption by individuals in all income groups, which in turn leads to declining personal savings rates. The empirical analysis based on this theory led to some interesting findings. First, at the national level, increased income inequality has a significant negative effect on personal savings rates. At the provincial level, the relationship also emerges in eight of ten provinces. Second, both the national and provincial results imply that growth in per capita income that worsens income inequality impacts negatively on personal savings rates. I interpret the results as evidence that social factors such as status-seeking generate consumption interdependence and are significant determinants of consumption and savings decisions of Canadians.

Cost effectiveness of a screen-and-treat program for asymptomatic vaginal infections in pregnancy: towards a significant reduction in the costs of prematurity.

Science.gov (United States)

Kiss, H; Pichler, Eva; Petricevic, L; Husslein, P

2006-08-01

The purpose of this investigation was to determine the cost-saving potential of a simple screen-and-treat program for vaginal infection, which has previously been shown to lead to a reduction of 50% in the rate of preterm births. To determine the potential cost savings, we compared the direct costs of preterm delivery of infants with a birth weight below 1900g with the costs of the screen-and-treat program. We used a cut-off birth weight of 1900g because, in our population, all infants with a birth weight below 1900g were transferred to the neonatal intensive care unit. The direct costs associated with preterm delivery were defined to include the costs of the initial hospitalization of both mother and infant and the costs of outpatient follow-up throughout the first 6 years of life of the former preterm infant. The costs of the screen-and-treat program were defined to include the costs of the screening examination and the resulting costs of antimicrobial treatment and follow-up. All calculations were based on health-economic data obtained in the metropolitan area of Vienna, Austria. The number of preterm infants with a birth weight below 1900g was 12 (0.5%) in the intervention group (N=2058) and 29 (1.3%) in the control group (N=2097). The direct costs per preterm birth were found to amount to EUR (euro) 60262. Overall, the expected total savings in direct costs achieved by the screen-and-treat program and the ensuing 50% reduction in the number preterm births with a birth weight below 1900g amounted to more than euro 11 million. The costs of screening and treatment were found to amount to merely 7% of the direct costs saved as a result of the screen-and-treat program. A simple preterm prevention program, consisting of screening and antimicrobial treatment and follow-up of women with asymptomatic vaginal infection, leads not only to a significant reduction in the rate of preterm births but also to substantial savings in the direct costs associated with prematurity.

Replacement or additional purchase: The impact of energy-efficient appliances on household electricity saving under public pressures

International Nuclear Information System (INIS)

Mizobuchi, Kenichi; Takeuchi, Kenji

2016-01-01

This study examined the influence of additional and replacement purchases of energy-efficient air-conditioners on power savings. We used a questionnaire survey and measured electricity use data from 339 Japanese households, collected from two city areas with different level of government-requested electricity-saving rates, namely, Osaka (10%) and Matsuyama (5%). The main findings of our study are as follows: (1) Households that purchased energy-efficient air-conditioners saved more electricity than those that did not. (2) “Additional-purchase households” showed significant energy savings, whereas “replacement households” did not. The rebound effect may negate the energy-saving effects of a new air-conditioner. (3) Altruistic attitude is associated with more active participation in power saving. (4) Households in Osaka saved more electricity than those in Matsuyama, probably because the government call to save electricity was more forceful. - Highlights: •Energy efficient air conditioner purchases affect household power savings. •Additional air conditioner purchase led to significant energy savings. •Replacement units did not produce more savings than non-purchase. • “Electricity conservation directives” amount had a significant power-saving effect. •Altruistic households were more likely to cooperate with power-saving requests.

A CLS-based survivable and energy-saving WDM-PON architecture

Science.gov (United States)

Zhu, Min; Zhong, Wen-De; Zhang, Zhenrong; Luan, Feng

2013-11-01

We propose and demonstrate an improved survivable and energy-saving WDM-PON with colorless ONUs. It incorporates both energy-saving and self-healing operations. A simple effective energy-saving scheme is proposed by including an energy-saving control unit in the OLT and a control unit at each ONU. The energy-saving scheme realizes both dozing and sleep (offline) modes, which greatly improves the energy-saving efficiency for WDM-PONs. An intelligent protection switching scheme is designed in the OLT, which can distinguish if an ONU is in dozing/sleep (offline) state or a fiber is faulty. Moreover, by monitoring the optical power of each channel on both working and protection paths, the OLT can know the connection status of every fiber path, thus facilitating an effective protection switching and a faster failure recovery. The improved WDM-PON architecture not only significantly reduces energy consumption, but also performs self-healing operation in practical operation scenarios. The scheme feasibility is experimentally verified with 10 Gbit/s downstream and 1.25 Gbit/s upstream transmissions. We also examine the energy-saving efficiency of our proposed energy-saving scheme by simulation, which reveals that energy saving mainly arises from the dozing mode, not from the sleep mode when the ONU is in the online state.

Solitary pulmonary nodules: cost-savings indicated by Australian experience with FDG-PET

International Nuclear Information System (INIS)

Keith, C.J.; Miles, K.A.; Pitman, A.G.; Hicks, R.J.

2002-01-01

Full text: To date, decision tree analyses demonstrating the cost-effectiveness of PET in Australia have been constrained by the need to use overseas values for diagnostic performance and disease prevalence. This study uses Australian PET experience to estimate the cost-savings produced by incorporation of FDG-PET into diagnostic algorithms for characterisation of solitary pulmonary nodules (SPNs). Values for disease prevalence and diagnostic accuracy of PET from a combined series of 89 SPNs from the Wesley Hospital and Peter MacCallum Cancer Institute were applied to two previously published decision tree models. Procedure costs were derived from the Medicare Benefits Schedule and DRG Cost Weights for Australian public hospitals. A cost of $1200 was assigned to PET. Sensitivity analyses evaluated the effect of disease prevalence and PET cost on the cost savings produced by each strategy. The values for disease prevalence (0.54), PET sensitivity (92%) and specificity (95%) from the combined series indicated cost savings per patient of $774 and $554 for the two decision trees. PET would remain cost-saving for values of prevalence up to 0.90 and 0.76, and PET costs of $1974 and $1967, for each model respectively. FDG-PET evaluation of SPNs would produce cost-savings within Australia even with substantial variations in disease prevalence and PET costs. Copyright (2002) Blackwell Science Pty Ltd

76 FR 31680 - General Reporting and Recordkeeping by Savings Associations and Savings and Loan Holding Companies

Science.gov (United States)

2011-06-01

... Savings Associations and Savings and Loan Holding Companies AGENCY: Office of Thrift Supervision (OTS... Savings and Loan Holding Companies. OMB Number: 1550-0011. Form Number: N/A. Description: This information...), 12 CFR 562.4 (audit of savings association, savings and loan holding company, or affiliate), 12 CFR...

Do Medicaid home and community based service waivers save money?

Science.gov (United States)

Harrington, Charlene; Ng, Terence; Kitchener, Martin

2011-10-01

This article estimates the potential savings to the Medicaid program of using 1915c Home and Community Based Services (HCBS) waivers rather than institutional care. For Medicaid HCBS waiver expenditures of $25 billion in 2006, we estimate the national savings to be over $57 billion, or $57,338 per waiver participant in 2006 compared with the cost of Medicaid institutional care (for which all waiver participants are eligible). When taking into account a potential 50% "woodwork effect" (for people who might have refused institutional services), the saving would be $21 billion. This analysis demonstrates that HCBS waiver programs present significant direct financial savings to Medicaid long-term care (LTC) programs.

12 CFR 583.21 - Savings association.

Science.gov (United States)

2010-01-01

... AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.21 Savings association. The term savings association means a Federal savings and loan association or a Federal savings bank chartered under section 5 of the Home Owners' Loan Act, a building and loan, savings and loan or homestead association or a cooperative...

Innovations for vehicle weight savings; Innovationen zur Gewichtseinsparung bei Kraftfahrzeugen

Energy Technology Data Exchange (ETDEWEB)

Phillips, W.C. [Budd Technical Center, Auburn Hills, MI (United States)

1999-04-01

The American auto market provides an example of the conflict between government legislation calling for fuel economy and lower emissions, which can be achieved among other things by reducing vehicle weight, and other legislative initiatives on the safety front as well as the growing demands of consumers for comfort, which add weight to the vehicle. Automakers are responding by making increasing use of lightweight materials and weight-optimized vehicle concepts. Backed by years of experience with a variety of materials, The Budd Company - an American subsidiary of the Thyssen-Krupp Group - is in an excellent position to offer customized lightweight systems solutions. From conventional steel to high-strength steels, aluminum castings, sheet and extrusions through to high-quality plastics such as SMC and SRIM, lightweight solutions for auto bodies and chassis are developed and offered to the automotive industry. The lightweighting potential of these various materials is being further exploited through the use of advanced manufacturing processes, such as the hydroforming of steel and aluminum, tailored blanks made of steel, and bonding techniques for aluminum. (orig.) [German] Das Beispiel des amerikanischen Automobilmarktes zeigt die entgegengesetzten Forderungen des Gesetzgebers zur Kraftstoff- und Emissionsreduzierung, was u.a. durch eine Verringerung des Fahrzeuggewichtes zu erreichen ist, und Gesetzesinitiativen im Bereich der Fahrzeugsicherheit sowie wachsende Komfort-Ansprueche der Kunden, die zur Gewichtserhoehung fuehren, auf. Die Fahrzeughersteller reagieren hierauf mit zunehmendem Einsatz leichter Werkstoffe und gewichtsoptimierter Leichtbau-Konzepte. Im Verbund des ThyssenKrupp Konzerns ist das amerikanische Tochterunternehmen The Budd Company aufgrund ihrer jahrelangen Erfahrungen mit einer Vielzahl von Werkstoffen in der herausragenden Position, individuelle und den jeweiligen Anforderungen entsprechende Leichtbau-Systemloesungen anbieten zu koennen. Vom

Savings in its sights for Somerset Trust.

Science.gov (United States)

Russell, Colin

2011-10-01

Colin Russell, healthcare specialist at Schneider Electric (pictured), explains how the company has recently worked with Taunton and Somerset NHS Foundation Trust to implement a major energy-saving project at the Trust's Musgrove Park Hospital in Taunton. He argues that, at a time when all areas of the service are being asked to reduce costs, such partnerships can potentially save the institution millions of pounds and significantly reduce carbon emissions, while "revitalising" parts of the NHS estate, and ensuring continuity of vital hospital services for facilities managers.

Dedicated orthogeriatric service saves the HSE a million euro

LENUS (Irish Health Repository)

Shanahan, E

2016-03-01

Hip fracture is common in older adults and is associated with high morbidity, mortality and significant health care costs. A pilot orthogeriatrics service was established in an acute hospital. We aimed to establish the cost effectiveness of this service. Length of hospital stay, discharge destination and rehabilitation requirements were analysed for a one year period and compared to patients who received usual care prior to the service. We calculated the costs incurred and savings produced by the orthogeriatric service. Median length of stay was reduced by 3 days (p=<0.001) saving €266,976. There was a 19% reduction in rehabilitation requirements saving €192,600. Median rehabilitation length of stay was reduced by 6.5 days saving €171,093. Reductions in long term care requirements led to savings of €10,934 per week. Costs to establish such a service amount to €171,564. The introduction of this service led to improved patient outcomes in a cost effective manner.

Geology of Woman Saving Concept

Directory of Open Access Journals (Sweden)

Shayesteh Madani

2014-09-01

Full Text Available Money is lubricant and an instrument for economic transaction. Money social dimension has increased over time, transforming it from a sole economic instrument to a device for various transactions. Money economic value in society is indicated through different forms, one of which is saving, in the sense of money accumulation and its use under specific future circumstances. Women, who form half of the society, take specific approaches to money and savings. The current research aims to investigate the perspectives and changing attitude strategy to money and saving among married women. The participants of this study include 20 to 70 year-old employed household married women who were observed phenomenologically and interviewed qualitatively on saving through.   The findings of this study demonstrated women perspectives on various types of saving, ways of saving, transfer methods, saving consumption forms and their mechanism. It also revealed that while money is an economic instrument and possess the economic material; attitudes and acts related to money are influenced by social conditions that has consequently turned saving into a social phenomenon.

Cost-savings of community water fluoridation program; Kerman, Iran, 2016

Directory of Open Access Journals (Sweden)

Ali Eskandarizadeh

2017-04-01

CONCLUSION: This study indicates significant annual savings from CWFP; additional savings could be achieved if this program is implemented in other regions. We could also receive even more if this program is integrated with other public oral health programs such as screening school children, community dentistry and oral health education.

Save Energy: Save Money!

Science.gov (United States)

Eccli, Eugene; And Others

This publication is a collection of inexpensive energy saving tips and home improvements for home owners, particularly in low-income areas or in older homes. Section titles are: (1) Keeping Warm; (2) Getting Heat Where You Need It; (3) Using the Sun; (4) Furnaces, Stoves, and Fireplaces; (5) Insulation and Other Energy Needs; (6) Do-It-Yourself…

Significant Weight Loss, Nausea, And Vomiting Due to Strongyloidiasis:A Case Report

Directory of Open Access Journals (Sweden)

Afshin Shafaghi

2008-11-01

Full Text Available Strongyloidiasis is caused by infestation with Strongyloides stercoralis, a free living tropical and semitropical soil helminth that has a larval form that penetrates intact skin.Clinical manifestations may be varied from an asymptomatic infection   in immunocompetent hosts to a diffuse and fatal form in immunocompromised hosts.We report a 56-year-old man from Dezful (south-west of Iran with a 6-month history of nausea, vomiting and significant weight loss (greater than 10%. Abdominal ltrasonography had no significant findings. Upper gastrointestinal series and abdominal CT were performed. Dilated bowel loops especially in the jejunum,with decreased mucosal folds were seen. Abiopsy specimen from the third part of duodenum showed strongyloides larvae,thus albendazole 400 mg twice a day for 3   days was initiated.He responded well to this treatment regimen.  

Contract saving schemes

NARCIS (Netherlands)

Ronald, R.; Smith, S.J.; Elsinga, M.; Eng, O.S.; Fox O'Mahony, L.; Wachter, S.

2012-01-01

Contractual saving schemes for housing are institutionalised savings programmes normally linked to rights to loans for home purchase. They are diverse types as they have been developed differently in each national context, but normally fall into categories of open, closed, compulsory, and ‘free

REMINDER: Saved Leave Scheme (SLS)

CERN Multimedia

2003-01-01

Transfer of leave to saved leave accounts Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'* annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that unused leave of all those taking part in the saved leave scheme at the closure of the leave year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2003 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they ar...

Losing weight to save lives: A review of the role of automobile weight and size in traffic fatalities

Energy Technology Data Exchange (ETDEWEB)

Ross, Marc; Wenzel, Tom

2001-07-01

Critics of higher fuel economy standards for vehicles have long argued that improving vehicle fuel economy will require reducing vehicle weight, and that would result in an increase in the number of fatalities from vehicle crashes. Several researchers have estimated that an across-the-board reduction of vehicle weight would reduce passenger safety (Evans 1991; Kahane 1997; U.S. GAO 1994). However, little research has been done on the relationship of vehicle size and fatality rates, independent of weight (see, however, Joksch, Massie, and Pichler 1998). In this report we review previous analyses of the relationship of vehicle weight and safety. We do this to study the opportunities to improve fuel economy in a more sophisticated way than across-the-board mass reduction. The aim is to explore improvements in traffic safety by making selected vehicle groups lighter, and retaining or enlarging selected vehicle dimensions. Unfortunately, the effects of size and mass have not been accurately separated in the crash fatality data, so some of our claims are only supported by general arguments from physics. In a follow-up report we will attempt to analyze crash fatality data to determine crash worthiness if the weight of certain vehicle groups would be decreased while maintaining or increasing vehicle size. The first section of this report provides an introduction to fatal vehicle crashes in the United States. We summarize several trends in automotive crash statistics over the last 20 years. Then we discuss approaches analysts have taken in studying factors that affect ''exposure'', the likelihood of being involved in a serious crash. In Section 2 we discuss standardized crash tests and the basic physics of crashes. We review previous research on the effect of vehicle mass in two-vehicle crashes in Section 3. We also present new research on reductions in risk achieved by recent light vehicles. Section 4 presents previous estimates of the effect of

Metaldyne: Plant-Wide Assessment at Royal Oak Finds Opportunities to Improve Manufacturing Efficiency, Reduce Energy Use, and Achieve Significant Cost Savings

Energy Technology Data Exchange (ETDEWEB)

2005-05-01

This case study prepared for the U.S. Department of Energy's Industrial Technologies Program describes a plant-wide energy assessment conducted at the Metaldyne, Inc., forging plant in Royal Oak, Michigan. The assessment focused on reducing the plant's operating costs, inventory, and energy use. If the company were to implement all the recommendations that came out of the assessment, its total annual energy savings for electricity would be about 11.5 million kWh and annual cost savings would be $12.6 million.

31 CFR 351.47 - May I purchase definitive Series EE savings bonds through a payroll savings plan?

Science.gov (United States)

2010-07-01

... savings bonds through a payroll savings plan? 351.47 Section 351.47 Money and Finance: Treasury....47 May I purchase definitive Series EE savings bonds through a payroll savings plan? You may purchase... maintains a payroll savings plan. An authorized issuing agent must issue the bonds. ...

12 CFR 561.43 - Savings association.

Science.gov (United States)

2010-01-01

..., chartered under section 5 of the Act, or a building and loan, savings and loan, or homestead association, or... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Savings association. 561.43 Section 561.43... AFFECTING ALL SAVINGS ASSOCIATIONS § 561.43 Savings association. The term savings association means a...

Savings Behavior and Satisfaction with Savings: A Comparison of Low- and High-Income Groups.

Science.gov (United States)

Davis, Elizabeth P.; Schumm, Walter R.

1987-01-01

Data on 1,739 married couples from 13 states were analyzed. Associations between satisfaction with savings and level of savings with measures of motivation to save, motivations to spend, and family resources were found to differ substantially between low- and high-income couples. (Author/CH)

31 CFR 359.35 - May I purchase definitive Series I savings bonds through a payroll savings plan?

Science.gov (United States)

2010-07-01

... savings bonds through a payroll savings plan? 359.35 Section 359.35 Money and Finance: Treasury... May I purchase definitive Series I savings bonds through a payroll savings plan? You may purchase definitive bonds through deductions from your pay if your employer maintains a payroll savings plan. An...

Potential savings from redetermining disability among children receiving supplemental security income benefits.

Science.gov (United States)

Pulcini, Christian D; Kotelchuck, Milton; Kuhlthau, Karen A; Nozzolillo, Alixandra A; Perrin, James M

2012-01-01

To compare the costs of redetermining disability to potential savings in Supplemental Security Income payments associated with different strategies for implementing Continuing Disability Reviews (CDRs) among children potentially enrolled in SSI from 2012 to 2021. We reviewed publicly available reports from the Social Security Administration and Government Accountability Office to estimate costs and savings. We considered CDRs for children ages 1-17 years, excluding mandated low-birth weight and age 18 redeterminations that SSA routinely has performed. If in 2012 the Social Security Administration performs the same number of CDRs for children as in 2010 (16,677, 1% of eligibles) at a cessation rate of 15%, the agency would experience net savings of approximately $145 million in benefit payments. If CDR numbers increased to the greatest level ever (183,211, 22% of eligibles, in 1999) at the same cessation rate, the agency would save approximately $1.6 billion in benefit payments. Increasing the numbers of CDRs for children represents a considerable opportunity for savings. Recognizing the dynamic nature of disability, the agency could reassess the persistence of disability systematically; doing so could free up resources from children who are no longer eligible and help the agency better direct its benefits to recipients with ongoing disability and whose families need support to meet the extra costs associated with raising a child with a major disability. Copyright © 2012 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Cost reduction in abdominal CT by weight-adjusted dose

International Nuclear Information System (INIS)

Arana, Estanislao; Marti-Bonmati, Luis; Tobarra, Eva; Sierra, Consuelo

2009-01-01

Aim: To analyze the influence of contrast dose adjusted by weight vs. fixed contrast dose in the attenuation and cost of abdominal computed tomography (CT). Materials and methods: A randomised, consecutive, parallel group study was conducted in 151 patients (74 men and 77 women, age range 22-67 years), studied with the same CT helical protocol. A dose at 1.75 ml/kg was administered in 101 patients while 50 patients had a fixed dose of 120 ml of same non-ionic contrast material (320 mg/ml). Mean enhancements were measured at right hepatic lobe, superior abdominal aorta and inferior cava vein. Statistical analysis was weight-stratified ( 81 kg). Results: Aortic attenuation was significantly superior (p 61 kg in dose-adjusted group, presented higher hepatic attenuation, being statistically significant in those >81 kg (p 80 kg, there was an over cost of Euro 10.7 per patient. Conclusions: An injection volume of 1.75 ml/kg offers an optimal diagnostic quality with a global savings of Euro 1.34 per patient.

Low-cost, low-weight CNG cylinder development. Final report

Energy Technology Data Exchange (ETDEWEB)

Richards, Mark E.; Melford, K.; Wong, J.; Gambone, L.

1999-09-01

This program was established to develop and commercialize new high-strength steel-lined, composite hoop-wrapped compressed natural gas (CNG) cylinders for vehicular applications. As much as 70% of the cost of natural gas vehicles can be related to on-board natural gas storage costs. The cost and weight targets for this program represent significant savings in each characteristic when compared to comparable containers available at the initiation of the program. The program objectives were to optimize specific weight and cost goals, yielding CNG cylinders with dimensions that should, allowing for minor modifications, satisfy several vehicle market segments. The optimization process encompassed material, design, and process improvement. In optimizing the CNG cylinder design, due consideration was given to safety aspects relative to national, international, and vehicle manufacturer cylinder standards and requirements. The report details the design and development effort, encompassing plant modifications, material selection, design issues, tooling development, prototype development, and prototype testing. Extenuating circumstances prevented the immediate commercialization of the cylinder designs, though significant progress was made towards improving the cost and performance of CNG cylinders. A new low-cost fiber was successfully employed while the weight target was met and the cost target was missed by less than seven percent.

12 CFR 575.10 - Acquisition and disposition of savings associations, savings and loan holding companies, and...

Science.gov (United States)

2010-01-01

... associations, savings and loan holding companies, and other corporations by mutual holding companies. 575.10... COMPANIES § 575.10 Acquisition and disposition of savings associations, savings and loan holding companies... savings and loan holding company in the stock form that is not a subsidiary holding company, provided the...

Savings and extinction of conditioned eyeblink responses in fragile X syndrome

DEFF Research Database (Denmark)

Smit, A E; van der Geest, J N; Vellema, M

2008-01-01

with FRAXA. In the present behavioral study, long-term effects of deficiency of FMRP were investigated by examining the acquisition, savings and extinction of delay eyeblink conditioning in male individuals with FRAXA. In the acquisition experiment, subjects with FRAXA displayed a significantly poor...... of the FMRP affects cerebellar motor learning. The normal performance in the savings experiment and aberrant performance in the acquisition and extinction experiments of individuals with FRAXA suggest that different mechanisms underlie acquisition, savings and extinction of cerebellar motor learning....

Prediction of dynamic Rankine Cycle waste heat recovery performance and fuel saving potential in passenger car applications considering interactions with vehicles’ energy management

International Nuclear Information System (INIS)

Horst, Tilmann Abbe; Tegethoff, Wilhelm; Eilts, Peter; Koehler, Juergen

2014-01-01

Highlights: • Method for evaluating fuel saving potential of vehicle waste heat recovery systems. • Analysis of interactions between waste heat recovery system and vehicle. • Evaluation of fuel saving potential in dynamic motorway driving scenario. • Parameter study for increasing fuel saving potential of integrated system. - Abstract: Waste heat recovery (WHR) by means of a Rankine Cycle is a promising approach for achieving reductions in fuel consumption and, as a result, exhaust emissions of passenger car engines. To find the best compromise between complexity and fuel saving potential, methods for predicting the WHR performance for different system configurations and stationary as well as dynamic driving scenarios are needed. Since WHR systems are usually not included in today’s car concepts, they are mostly designed as add-on systems. As a result their integration may lead to negative interactions due to increased vehicle weight, engine backpressure and cooling demand. These effects have to be considered when evaluating the fuel saving potential. A new approach for predicting WHR performance and fuel saving potential was developed and is presented in this paper. It is based on simple dynamic models of a system for recovering exhaust gas waste heat and its interfaces with the vehicle: the exhaust system for heat input, the on-board electric system for power delivery and the engine cooling system for heat rejection. The models are validated with test bench measurements of the cycle components. A study of fuel saving potential in an exemplary dynamic motorway driving scenario shows the effect of vehicle integration: while the WHR system could improve fuel economy by 3.4%, restrictions in power output due to the architecture of the on-board electric system, package considerations, increased weight, cooling demand and exhaust gas backpressure lead to a reduction of fuel saving potential by 60% to 1.3%. A parameter study reveals that, in addition to weight

Factors affecting successful closure of hemodynamically significant patent ductus arteriosus with indomethacin in extremely low birth weight infants.

Science.gov (United States)

Yang, Chuan-Zhong; Lee, Jiun

2008-05-01

The incidence of patent ductus arteriosus (PDA) is high in extremely low birth weight (ELBW) infants. Indomethacin has been widely used in the prophylaxis and treatment of hemodynamically significant PDA. This retrospective study was undertaken to identify factors such as birth weight, gestational age, gender, fetal growth retardation, ductal size, timing of the first dose of indomethacin and side effects of indomethacin, which may affect the successful closure of the PDA with indomethacin in ELBW infants. A cohort of 139 ELBW infants who had received indomethacin treatment for PDA during a consecutive period of more than three years (September 2000 to December 2003) was retrospectively analyzed. Administration of indomethacin was associated with closure of PDA in 108 (77.7%) of 139 ELBW infants, and only 19.4% of infants required surgical ligation of the ductus eventually. There was no significant relationship between closure of PDA with gestational age, gender, fetal growth retardation, and ductal size. A higher birth weight and early use of indomethacin after birth could significantly increase the closure rate of PDA (P<0.05). Side effects of indomethacin such as transient oliguria and hyponatremia during indomethacin therapy did not affect PDA closure. Indomethacin is effective for the treatment of PDA in ELBW infants. A higher rate of ductal closure is related to the increase of birth weight. PDA closure with indomethacin is age-related, and early administration of indomethacin could increase PDA closure and reduce the incidence of hyponatremia. There is no significant difference in major morbidities such as bronchopulmonary dysplasia (BPD), intraventricular hemorrhage (IVH), necrotizing enterocolitis (NEC), and retinopathy of prematurity (ROP) after early treatment. Early screening for hemodynamically significant PDA in ELBW infants and early treatment with indomethacin are recommended.

Investigating the distribution of the value of travel time savings

DEFF Research Database (Denmark)

Fosgerau, Mogens

2006-01-01

The distribution of the value of travel time savings (VTTS) is investigated employing various nonparametric techniques to a large dataset originating from a stated choice experiment. The data contain choices between a fast and more expensive alternative and a slow and less expensive alternative....... Increasing the implicit price of time leads to an increased share of respondents who decline to pay to save time. But a significant proportion of respondents, 13%, remain willing to pay to save time at the highest price of time in the design. This means that the right tail of the VTTS distribution...

The influence of multiple goals on driving behavior: the case of safety, time saving, and fuel saving.

Science.gov (United States)

Dogan, Ebru; Steg, Linda; Delhomme, Patricia

2011-09-01

Due to the innate complexity of the task drivers have to manage multiple goals while driving and the importance of certain goals may vary over time leading to priority being given to different goals depending on the circumstances. This study aimed to investigate drivers' behavioral regulation while managing multiple goals during driving. To do so participants drove on urban and rural roads in a driving simulator while trying to manage fuel saving and time saving goals, besides the safety goals that are always present during driving. A between-subjects design was used with one group of drivers managing two goals (safety and fuel saving) and another group managing three goals (safety, fuel saving, and time saving) while driving. Participants were provided continuous feedback on the fuel saving goal via a meter on the dashboard. The results indicate that even when a fuel saving or time saving goal is salient, safety goals are still given highest priority when interactions with other road users take place and when interacting with a traffic light. Additionally, performance on the fuel saving goal diminished for the group that had to manage fuel saving and time saving together. The theoretical implications for a goal hierarchy in driving tasks and practical implications for eco-driving are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Energy-saving methodology for material handling applications

Energy Technology Data Exchange (ETDEWEB)

Makris, P.A.; Makri, A.P.; Provatidis, C.G. [National Technical University of Athens, School of Mechanical Engineering, Mechanical Design and Control Systems Division, 9 Iroon Polytechniou Street, Zografou Campus, GR-15773 Athens (Greece)

2006-10-15

This paper presents an energy saving approach to the problem of order picking in warehousing environment, which is directly related to the well-known Traveling Salesman Problem (TSP). While the available heuristic algorithms for the order-picking problem search for the route that minimizes the travel time, here the problem is addressed from the energy saving point of view. In a few words, the least energy-consuming route is identified in order to quantify the trade off in time and energy between the fastest route and the most energy economic one. Keeping in mind that often energy is as important as time, especially during a low-demand period, the current paper sheds some light into a two dimensional way of addressing the warehouse material handling problem, which saves time as well as energy. A very interesting finding is that a relatively small loss of service time in many cases may lead to a significant decrease of consumed energy without any additional cost. (author)

Factors influencing energy-saving behavior of urban households in Jiangsu Province

International Nuclear Information System (INIS)

Yue, Ting; Long, Ruyin; Chen, Hong

2013-01-01

In this research, the willingness of households to adopt different energy-saving behavior has been analyzed, and factors influencing energy-saving behavior in Jiangsu Province, China, have been examined. The study builds on a broad and practical conceptual framework that embraces three types of energy-saving behavior and four dimensions of influencing factors, including socio-demographics, energy-saving awareness, behavioral ability, and situational factors. The empirical results are based on an Internet survey that was sent out to 638 households. The results indicate that socio-demographic characteristics, including age, gender, income level, household structure, and educational background, are all important factors influencing energy-saving behavior. At present, respondents adopt the usage-reduction type of behavior more often than the other two types, which require a greater capacity to pay for energy-efficient products and a higher level of energy-saving awareness. Situational factors have significant positive moderating effects when the variables of behavioral ability and energy-saving awareness act on energy-saving behavior. In addition, the results also show that spatial differences exist among the three regions of Jiangsu Province. Finally, some implications of these results for the design of future incentive policies and measures to encourage energy-saving behavior are presented. -- Highlights: •A broad and practical conceptual framework of energy-saving behaviors is built. •Socio-demographic characteristics are determinants of energy-saving behavior. •Respondents adopt the usage-reduction type more often than the other two types. •Situational factors have positive moderating effects on the other two variables. •Spatial differences exist among the three regions of Jiangsu Province

Social Capital and Savings Behavior

DEFF Research Database (Denmark)

Newman, Carol; Tarp, Finn; Khai, Luu Duc

In this paper, we analyze household savings in rural Vietnam paying particular attention to the factors that determine the proportion of savings held as formal deposits. Our aim is to explore the extent to which social capital can play a role in promoting formal savings behavior. Social capital...

Saving water through global trade

NARCIS (Netherlands)

Chapagain, Ashok; Hoekstra, Arjen Ysbert; Savenije, H.H.G.

2005-01-01

Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water

Energy savings in CSFR - building sector

International Nuclear Information System (INIS)

Jacobsen, F.R.

1993-01-01

The Czechoslovak/Danish project on energy savings in buildings proves that it is possible to save up to 30% of the energy in buildings. 10% can be saved at an investment of 27 bill KCS. The total investment that is needed to save 30% is 140 bill KCS. Further energy savings can be obtained through more energy efficient supply systems. Information dissemination is important for the energy saving programme as are economic incentives. Investments in energy savings should be profitable for the investor, but this is not the case in the Czech and Slovak republics today. Changes are needed. Energy prices are still to low, compared to investment costs. Financial possibilities are not satisfactory for private investors. Price systems are not favourable to investment in energy savings. Training is needed for boiler men and energy consultants. Legislation is essential for the support of the full range of activities in the energy sector. Research and Development activities must back up the development of the sector. Pilot projects can illuminate the savings potential. The production of technical equipment for control and metering and production of insulation materials must be promoted. (AB)

Influences on Energy Savings of Heavy Trucks Using Cooperative Adaptive Cruise Control

Energy Technology Data Exchange (ETDEWEB)

Lammert, Michael P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); McAuliffe, Brian [National Research Council Canada; Lu, Xiao-Yun [University of California-Berkeley; Shladover, Steven [University of California-Berkeley; Surcel, Marius-Dorin [FPInnovations; Kailas, Aravind [Volvo Group

2018-04-03

An integrated adaptive cruise control (ACC) and cooperative ACC (CACC) was implemented and tested on three heavy-duty tractor-trailer trucks on a closed test track. The first truck was always in ACC mode, and the followers were in CACC mode using wireless vehicle-vehicle communication to augment their radar sensor data to enable safe and accurate vehicle following at short gaps. The fuel consumption for each truck in the CACC string was measured using the SAE J1321 procedure while travelling at 65 mph and loaded to a gross weight of 65,000 lb, demonstrating the effects of: inter-vehicle gaps (ranging from 3.0 s or 87 m to 0.14 s or 4 m, covering a much wider range than previously reported tests), cut-in and cut-out maneuvers by other vehicles, speed variations, the use of mismatched vehicles (standard trailers mixed with aerodynamic trailers with boat tails and side skirts), and the presence of a passenger vehicle ahead of the platoon. The results showed that energy savings generally increased in a non-linear fashion as the gap was reduced. The middle truck saved the most fuel at gaps shorter than 12 m and the trailing truck saved the most at longer gaps, while lead truck saved the least at all gaps. The cut-in and cut-out maneuvers had only a marginal effect on fuel consumption even when repeated every two miles. The presence of passenger-vehicle traffic had a measurable impact. The fuel-consumption savings on the curves was less than on the straight sections.

Consumption and Savings of First Time House Owners

DEFF Research Database (Denmark)

Ejarque, João; Leth-Petersen, Søren

We characterize savings behavior around the point of the first house purchase. Using a panel data set with income and wealth information on Danish first-time house owners we document that households save for the down payment, mortgage to the limit, run down liquid assets at purchase, and adjust...... to adverse income shocks occurring just after the purchase by reducing consumption. We build a model that replicates these observations, show that the preference parameters are identified from the data, and estimate them. Based on the estimated model house buying significantly reduces the ability to smooth...

The M77 Highway: saving lives and money.

Science.gov (United States)

Crane, Evan O T; Augustine, Angelica; Tait, Gavin R

2008-09-01

Upgrading of a stretch of the A77, a major road in South West Scotland to Highway status has resulted in a significant reduction in the incidence of serious and fatal road traffic accidents on a major international route. Notwithstanding the pain and suffering prevented, the annual economic savings amount to over pound 6.1 Million ($12.14 M/euro 7.96 M) The Highway, with an effective central reservation barrier, will pay for itself in 17 years and will continue to prevent serious injury and save lives.

Energy Saving Melting and Revert Reduction Technology: Aging of Graphitic Cast Irons and Machinability

Energy Technology Data Exchange (ETDEWEB)

Richards, Von L. [Advanced Technology Inst., Virginia Beach, VA (United States)

2012-09-19

The objective of this task was to determine whether ductile iron and compacted graphite iron exhibit age strengthening to a statistically significant extent. Further, this effort identified the mechanism by which gray iron age strengthens and the mechanism by which age-strengthening improves the machinability of gray cast iron. These results were then used to determine whether age strengthening improves the machinability of ductile iron and compacted graphite iron alloys in order to develop a predictive model of alloy factor effects on age strengthening. The results of this work will lead to reduced section sizes, and corresponding weight and energy savings. Improved machinability will reduce scrap and enhance casting marketability. Technical Conclusions: Age strengthening was demonstrated to occur in gray iron ductile iron and compacted graphite iron. Machinability was demonstrated to be improved by age strengthening when free ferrite was present in the microstructure, but not in a fully pearlitic microstructure. Age strengthening only occurs when there is residual nitrogen in solid solution in the Ferrite, whether the ferrite is free ferrite or the ferrite lamellae within pearlite. Age strengthening can be accelerated by Mn at about 0.5% in excess of the Mn/S balance Estimated energy savings over ten years is 13.05 trillion BTU, based primarily on yield improvement and size reduction of castings for equivalent service. Also it is estimated that the heavy truck end use of lighter castings for equivalent service requirement will result in a diesel fuel energy savings of 131 trillion BTU over ten years.

VA Telemedicine: An Analysis of Cost and Time Savings.

Science.gov (United States)

Russo, Jack E; McCool, Ryan R; Davies, Louise

2016-03-01

The Veterans Affairs (VA) healthcare system provides beneficiary travel reimbursement ("travel pay") to qualifying patients for traveling to appointments. Travel pay is a large expense for the VA and hence the U.S. Government, projected to cost nearly $1 billion in 2015. Telemedicine in the VA system has the potential to save money by reducing patient travel and thus the amount of travel pay disbursed. In this study, we quantify this savings and also report trends in VA telemedicine volumes over time. All telemedicine visits based at the VA Hospital in White River Junction, VT between 2005 and 2013 were reviewed (5,695 visits). Travel distance and time saved as a result of telemedicine were calculated. Clinical volume in the mental health department, which has had the longest participation in telemedicine, was analyzed. Telemedicine resulted in an average travel savings of 145 miles and 142 min per visit. This led to an average travel payment savings of $18,555 per year. Telemedicine volume grew significantly over the study period such that by the final year the travel pay savings had increased to $63,804, or about 3.5% of the total travel pay disbursement for that year. The number of mental health telemedicine visits rose over the study period but remained small relative to the number of face-to-face visits. A higher proportion of telemedicine visits involved new patients. Telemedicine at the VA saves travel distance and time, although the reduction in travel payments remains modest at current telemedicine volumes.

Energy Savings Measure Packages. Existing Homes

Energy Technology Data Exchange (ETDEWEB)

Casey, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2011-11-01

This document presents the most cost effective Energy Savings Measure Packages (ESMP) for existing mixed-fuel and all electric homes to achieve 15% and 30% savings for each BetterBuildings grantee location across the United States. These packages are optimized for minimum cost to homeowners for source energy savings given the local climate and prevalent building characteristics (i.e. foundation types). Maximum cost savings are typically found between 30% and 50% energy savings over the reference home; this typically amounts to $300 - $700/year.

Differences in Household Saving between Non-Hispanic White and Hispanic Households

Science.gov (United States)

Fisher, Patti J.; Hsu, Chungwen

2012-01-01

This study uses the 2007 Survey of Consumer Finances to empirically explore differences in saving behavior between Hispanic (N = 533) and non-Hispanic White (N = 2,473) households. The results of the logistic regression model show that self-employed Hispanics were more likely to save, while self-employment was not significant for Whites. Being…

Biopulping: A new energy-saving technology for papermaking

International Nuclear Information System (INIS)

Scott, G.M.; Akhtar, M.; Lentz, M.J.; Kirk, T.K.; Swaney, R.; Shipley, D.F.

1997-01-01

Biopulping is defined as the treatment of wood chips with lignin-degrading fungi prior to pulping. Fungal pretreatment prior to mechanical pulping reduces electrical energy requirements during refining or increases mill throughput, improves paper strength, reduces the pitch content, reduces cooking time for sulfite pulping, and reduces the environmental impact of pulping. The recent work involved scaling up the biopulping process towards the industrial level, investigating both the engineering and economic feasibility of the technology. The authors envision the process to be done in either a chip-pile or silo-based system for which several factors need to be considered. These factors include the degree of decontamination, a hospitable environment for the fungus, and the overall process economics. Currently, treatment of the chips with low pressure steam is sufficient for decontamination. Furthermore, a simple, forced ventilation system can be used to maintain the proper temperature, humidity, and moisture content throughout the chip bed, thus promoting uniform growth of the fungus. The pilot-scale trial resulted in the successful treatment of 4 tons, of wood chips (dry weight basis) with results comparable to those on a laboratory scale. For mechanical pulping, a 2-week treatment results in approximately 30% energy savings that, considering the additional equipment and operating costs, results in an overall savings of $9 to $20/ton of pulp in a chip-pile system. The other benefits that biopulping confers improve the economics considerably A larger, 40-ton trial was also successful, with energy savings and paper properties comparable with the laboratory scale

Delaware's Wellness Program: Motivating Employees Improves Health and Saves Money.

Science.gov (United States)

Davis, Jennifer J J

2008-09-01

Every year, employers around the country evaluate their company benefits package in the hopes of finding a solution to the ever-rising cost of health insurance premiums. For many business executives, the only logical choice is to pass along those costs to the employee. As an employer, our goal in Delaware has always been to come up with innovative solutions to drive down the cost of health insurance premiums while encouraging our employees to take responsibility for their own health and wellness by living a healthy and active lifestyle, and provide them with the necessary tools. The DelaWELL program (N = 68,000) was launched in 2007, after being tested in initial (N = 100) and expanded (N = 1500) pilot programs from 2004 to 2006 in which 3 similar groups were compared before and after the pilot. Employee health risk assessment, education, and incentives provided employees the necessary tools we had assumed would help them make healthier lifestyle choices. In the first pilot, fewer emergency department visits and lower blood pressure levels resulted in direct savings of more than $62,000. In the expanded pilot, in all 3 groups blood pressure was significantly reduced (P employees participating in DelaWELL had a combined weight loss of 5162 lb. Decision makers in the State of Delaware have come up with an innovative solution to controlling costs while offering employees an attractive benefits package. The savings from its employee benefit program have allowed the state to pass along the savings to employees by maintaining employee-paid health insurance contributions at the same level for the past 3 years. DelaWELL has already confirmed our motto, "Although it may seem an unusual business investment to pay for healthcare before the need arises, in Delaware we concluded that this makes perfect sense." This promising approach to improving health and reducing healthcare costs could potentially be applied to other employer groups.

Delaware's Wellness Program: Motivating Employees Improves Health and Saves Money

Science.gov (United States)

Davis, Jennifer “J. J.”

2008-01-01

Background Every year, employers around the country evaluate their company benefits package in the hopes of finding a solution to the ever-rising cost of health insurance premiums. For many business executives, the only logical choice is to pass along those costs to the employee. Objectives As an employer, our goal in Delaware has always been to come up with innovative solutions to drive down the cost of health insurance premiums while encouraging our employees to take responsibility for their own health and wellness by living a healthy and active lifestyle, and provide them with the necessary tools. Methods The DelaWELL program (N = 68,000) was launched in 2007, after being tested in initial (N = 100) and expanded (N = 1500) pilot programs from 2004 to 2006 in which 3 similar groups were compared before and after the pilot. Employee health risk assessment, education, and incentives provided employees the necessary tools we had assumed would help them make healthier lifestyle choices. Results In the first pilot, fewer emergency department visits and lower blood pressure levels resulted in direct savings of more than $62,000. In the expanded pilot, in all 3 groups blood pressure was significantly reduced (P employees participating in DelaWELL had a combined weight loss of 5162 lb. Conclusions Decision makers in the State of Delaware have come up with an innovative solution to controlling costs while offering employees an attractive benefits package. The savings from its employee benefit program have allowed the state to pass along the savings to employees by maintaining employee-paid health insurance contributions at the same level for the past 3 years. DelaWELL has already confirmed our motto, “Although it may seem an unusual business investment to pay for healthcare before the need arises, in Delaware we concluded that this makes perfect sense.” This promising approach to improving health and reducing healthcare costs could potentially be applied to other

An empirical study of the substitution of foreign for domestic savings in Brazil

Directory of Open Access Journals (Sweden)

Luiz Carlos Bresser-Pereira

2014-01-01

Full Text Available This study aims to investigate the relations between the level of the real exchange rate, foreign savings and domestic savings in Brazil. The appreciation of the domestic currency caused by financing the current account deficit reduces the expected profit rate in the tradable goods industry, leading to a drop in domestic savings and the substitution of foreign for domestic savings. An econometric analysis of the Brazilian economy indicates a stable long-term relation between the exchange rate and domestic savings, and that relative devaluations of the real exchange rate positively and significantly affect domestic savings in 1994–2013. The estimations’ results persist even after the period is divided into two samples, after tests showing the presence of a structural break in the model in 2002. In addition, the results of the estimations performed on the two samples confirm the presence of substitution of foreign for domestic savings.

SAVING BEHAVIOUR AND DETERMINANTS OF SAVING MOBILIZATION BY RURAL FINANCIAL CO-OPERATORS IN TIGRAI REGION, ETHIOPIA

Directory of Open Access Journals (Sweden)

Sebhatu Kifle Tesfamariam

2012-01-01

Full Text Available This paper identified and examined saving behaviour and determinants of saving mobiliza-tion by the rural co-operators in Southern Tigrai Ethiopia. The input for the study was ob-tained from randomly selected 120 rural household savers from six purposively selected ru-ral savings and credit cooperatives. The result of the study using least squares method showed that savings mobilized is determined by household annual income, amount of loan borrowed and year of member stay in the cooperative. These factors therefore have to be considered in designing strategies aimed at improving the saving mobilization of coopera-tive members in the study area. Besides, economically feasible cooperative societies in the region should be encouraged among the rural households by supporting them with revolv-ing funds as they are more effective and efficient in mobilizing rural savings and provide collateral plus guarantor-based loans with low default rate. This will enable them to boost up their production output and increase their savings thereby stimulating the rural economy.

Connecting possibilistic prudence and optimal saving

Directory of Open Access Journals (Sweden)

Ana María Lucia Casademunt

2013-12-01

Full Text Available In this paper we study the optimal saving problem in the framework of possibility theory. The notion of possibilistic precautionary saving is introduced as a measure of the way the presence of possibilistic risk (represented by a fuzzy number influences a consumer in establishing the level of optimal saving. The notion of prudence of an agent in the face of possibilistic risk is defined and the equivalence between the prudence condition and a positive possibilistic precautionary saving is proved. Some relations between possibilistic risk aversion, prudence and possibilistic precautionary saving were established.

Moonlight project promotes energy-saving technology

Science.gov (United States)

Ishihara, A.

1986-01-01

In promoting energy saving, development of energy conservation technologies aimed at raising energy efficiency in the fields of energy conversion, its transportation, its storage, and its consumption is considered, along with enactment of legal actions urging rational use of energies and implementation of an enlightenment campaign for energy conservation to play a crucial role. Under the Moonlight Project, technical development is at present being centered around the following six pillars: (1) large scale energy saving technology; (2) pioneering and fundamental energy saving technology; (3) international cooperative research project; (4) research and survey of energy saving technology; (5) energy saving technology development by private industry; and (6) promotion of energy saving through standardization. Heat pumps, magnetohydrodynamic generators and fuel cells are discussed.

Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

CERN Multimedia

HR Division

2001-01-01

As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22 B) can be transferred to the saved leave account at the end of the leave year (30 September). Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the ...

Empirical Study on Annual Energy-Saving Performance of Energy Performance Contracting in China

Directory of Open Access Journals (Sweden)

Hongquan Ruan

2018-05-01

Full Text Available A lack of trust in Energy Service Company (ESCo is the most critical factor affecting the development of Energy Performance Contracting (EPC in China, compared with other constraints. One cannot easily estimate the energy-saving performance of an EPC project. Under that condition, lack of trust may cause the Energy-Consuming Unit (ECU to suspect the energy-saving performance promised by the ESCo, thus leaving potentially profitable projects without necessary funding. Currently, specific studies taking an across-projects viewpoint on annual energy-saving performance of EPC projects in multiple subsectors, objectively and quantitatively, are lacking. This paper studies the regression relationships of annual energy-saving quantity in terms of revamping cost and the regression relationships of annual cost saving in terms of revamping cost. The regression results show that there are statistically significant correlations in the above relationships in the nine subsectors investigated. This is significant for ESCos and ECUs, because knowledge on energy-saving performance could contribute to EPC investment decisions and trust relationships between ESCos and ECUs. Then, a multiple linear regression model of revamping cost is set up to analyze its influencing factors. The model indicates that the subsector the sample belongs to, financing, registered capital of the ESCo, and contract period have significant effects on revamping cost. Thus, policy implications regarding innovation of EE promotion technology, clarifying ESCos’ exit mechanism, innovation of financing mechanism, and improving the market credit environment for promoting investment in EPC projects, are provided.

Enersave API: Android-based power-saving framework for mobile devices

Directory of Open Access Journals (Sweden)

A.M. Muharum

2017-06-01

Full Text Available Power consumption is a major factor to be taken into consideration when using mobile devices in the IoT field. Good Power management requires proper understanding of the way in which it is being consumed by the end-devices. This paper is a continuation of the work in Ref. [1] and proposes an energy saving API for the Android Operating System in order to help developers turn their applications into energy-aware ones. The main features heavily used for building smart applications, greatly impact battery life of Android devices and which have been taken into consideration are: Screen brightness, Colour scheme, CPU frequency, 2G/3G network, Maps, Low power localisation, Bluetooth and Wi-Fi. The assessment of the power-saving API has been performed on real Android devices and also compared to the most powerful power-saving applications – DU Battery Saver and Battery Saver 2016 – currently available on the Android market. Comparisons demonstrate that the Enersave API has a significant impact on power saving when incorporated in android applications. While DU Battery Saver and Battery Saver 2016 help saving 22.2% and 40.5% of the battery power respectively, the incorporation of the Enersave API in android applications can help save 84.6% of battery power.

Reinforcement Learning and Savings Behavior.

Science.gov (United States)

Choi, James J; Laibson, David; Madrian, Brigitte C; Metrick, Andrew

2009-12-01

We show that individual investors over-extrapolate from their personal experience when making savings decisions. Investors who experience particularly rewarding outcomes from saving in their 401(k)-a high average and/or low variance return-increase their 401(k) savings rate more than investors who have less rewarding experiences with saving. This finding is not driven by aggregate time-series shocks, income effects, rational learning about investing skill, investor fixed effects, or time-varying investor-level heterogeneity that is correlated with portfolio allocations to stock, bond, and cash asset classes. We discuss implications for the equity premium puzzle and interventions aimed at improving household financial outcomes.

Reinforcement Learning and Savings Behavior*

Science.gov (United States)

Choi, James J.; Laibson, David; Madrian, Brigitte C.; Metrick, Andrew

2009-01-01

We show that individual investors over-extrapolate from their personal experience when making savings decisions. Investors who experience particularly rewarding outcomes from saving in their 401(k)—a high average and/or low variance return—increase their 401(k) savings rate more than investors who have less rewarding experiences with saving. This finding is not driven by aggregate time-series shocks, income effects, rational learning about investing skill, investor fixed effects, or time-varying investor-level heterogeneity that is correlated with portfolio allocations to stock, bond, and cash asset classes. We discuss implications for the equity premium puzzle and interventions aimed at improving household financial outcomes. PMID:20352013

Does energy labelling on residential housing cause energy savings?

Energy Technology Data Exchange (ETDEWEB)

Kjaerbye, V.H.

2009-07-01

Danish households use more than 30% of the total amount of energy being used in Denmark. More than 80% of this energy is dedicated to space heating. The same relation is seen in many OECD countries. The corresponding energy savings potential was recently estimated at 30% of the energy used in buildings. Energy labelling is seen as an important instrument to target these potential energy savings. This paper evaluates the effects of the Danish Energy Labelling Scheme on energy consumption in existing single-family houses with propensity score matching using real metered natural gas consumption and a very wide range of register data describing the houses and households. The study did not find significant energy savings due to the Danish Energy Labelling Scheme, but more research would be needed to complement this conclusion

Traffic-aware Elastic Optical Networks to leverage Energy Savings

DEFF Research Database (Denmark)

Turus, Ioan; Fagertun, Anna Manolova; Dittmann, Lars

2014-01-01

Because of the static nature of the deployed optical networks, large energy wastage is experienced today in production networks such as Telecom networks . With power-adaptive optical interfaces and suitable grooming procedures, we propose the design of more energy efficient transport networks....... Optical network reconfigurations are performed by GMPLS node controllers according to monitored traffic information. The investigated energy reduction strategies are simulated on two large scale transport networks (DT17 and COST37). The results show that the energy savings obtained by these strategies......-Europea n COST37 network, for both symbol-rate and modulation format adaptations significant savings are obtained . Mixed adaptation (jointly performing symbol-rate and modulation format adaptations) used together with optical grooming allows up to 4 4 % and 4 7 % power savings in DT17 and COST37 networks...

Electric energy savings from new technologies

Energy Technology Data Exchange (ETDEWEB)

Moe, R.J.; Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.; Imhoff, K.L.; Fisher, Z.J.

1986-01-01

Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for ten technologies were prepared. The total projected annual savings for the year 2000 for all ten technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In the Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Thus, the savings projected here represent between 4% and 14% of total consumption projected for 2000. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference forecast, reducing projected electricity consumption from what it otherwise would have been, the savings estimated here should not be directly subtracted from the reference forecast.

Saving for Success: Financial Education and Savings Goal Achievement in Individual Development Accounts

Science.gov (United States)

Grinstead, Mary L.; Mauldin, Teresa; Sabia, Joseph J.; Koonce, Joan; Palmer, Lance

2011-01-01

Using microdata from the American Dream Demonstration, the current study examines factors associated with savings and savings goal achievement (indicated by a matched withdrawal) among participants of individual development account (IDA) programs. Multinomial logit results show that hours of participation in financial education programs, higher…

Short-Term Saved Leave Scheme

CERN Multimedia

2007-01-01

As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new implementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme a...

Short-Term Saved Leave Scheme

CERN Multimedia

HR Department

2007-01-01

As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new im-plementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme ...

Development and Application of Coating Weight Control Technology

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Hyoung [Dongbu Steel, Incheon (Korea, Republic of)

2010-08-15

Precise coating weight control is very important issue on quality and minimizing operating costs on continuous galvanizing line. These days, many steel making companies are having a new understanding of cost importance by rise raw material prices and customers requirement for cost reduction. Dongbu steel also meets these situations and decided to develop the technologies. Dongbu Steel developed Integrated coating weight control system jointly with Objective Control Ltd. and installed 2CGL and 4CGL. Several technological functions were developed and realized to achieve true hands-off operation and maximum cost benefit by combining model-based preset and dynamic prediction models. We also installed it on 1 CGL on April, 2008. This paper will present the interface, functions and application result of the integrated coating weight control system including Zn saving and coating weight uniformity.

RANWAR: rank-based weighted association rule mining from gene expression and methylation data.

Science.gov (United States)

Mallik, Saurav; Mukhopadhyay, Anirban; Maulik, Ujjwal

2015-01-01

Ranking of association rules is currently an interesting topic in data mining and bioinformatics. The huge number of evolved rules of items (or, genes) by association rule mining (ARM) algorithms makes confusion to the decision maker. In this article, we propose a weighted rule-mining technique (say, RANWAR or rank-based weighted association rule-mining) to rank the rules using two novel rule-interestingness measures, viz., rank-based weighted condensed support (wcs) and weighted condensed confidence (wcc) measures to bypass the problem. These measures are basically depended on the rank of items (genes). Using the rank, we assign weight to each item. RANWAR generates much less number of frequent itemsets than the state-of-the-art association rule mining algorithms. Thus, it saves time of execution of the algorithm. We run RANWAR on gene expression and methylation datasets. The genes of the top rules are biologically validated by Gene Ontologies (GOs) and KEGG pathway analyses. Many top ranked rules extracted from RANWAR that hold poor ranks in traditional Apriori, are highly biologically significant to the related diseases. Finally, the top rules evolved from RANWAR, that are not in Apriori, are reported.

Energy savings: persuasion and persistence

Energy Technology Data Exchange (ETDEWEB)

Eijadi, David; McDougall, Tom; Leaf, Kris; Douglas, Jim; Steinbock, Jason; Reimer, Paul [The Weidt Group, Minnetonka, MN (United States); Gauthier, Julia [Xcel Energy, Minneapolis, MN (United States); Wild, Doug; Richards McDaniel, Stephanie [BWBR Architects, Inc., Saint Paul, MN (United States)

2005-07-01

In this study, the architects, sponsoring utility and energy simulation specialist joined together to investigate the persistence of energy savings in three completed projects: a college library; a municipal transportation facility; and a hospital. The primary question being 'How well did the design decisions made with the help of simulation analysis translate into building operations over several years?' Design simulation and metered performance data are compared for specific energy-saving strategies. The paper provides a brief overview of the basis of selection of the three projects, the energy design assistance methods employed and the decisions made, along with their savings expectations. For each case, design characteristics, modelling assumptions, selected strategies and actual metered performance are outlined. We find evidence of appropriate levels of energy conservation, but they are not the absolute values predicted. In each case, the discrepancies between modelling assumptions and final construction or operating procedures are identified, examined and rectified. The paper illustrates that while owners are saving energy, they are not always getting the full savings potential for what they install. The paper concludes with a re-examination of the overall process. It evaluates the potential for additional savings of individual technologies and related larger utility incentives to design teams and building owners.

Potential travel cost saving in urban public-transport networks using smartphone guidance

Science.gov (United States)

2018-01-01

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers’ preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger’s choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost. PMID:29746528

Potential travel cost saving in urban public-transport networks using smartphone guidance.

Science.gov (United States)

Song, Cuiying; Guan, Wei; Ma, Jihui

2018-01-01

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers' preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger's choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost.

Saving-Based Asset Pricing

DEFF Research Database (Denmark)

Dreyer, Johannes Kabderian; Schneider, Johannes; T. Smith, William

2013-01-01

This paper explores the implications of a novel class of preferences for the behavior of asset prices. Following a suggestion by Marshall (1920), we entertain the possibility that people derive utility not only from consumption, but also from the very act of saving. These ‘‘saving-based’’ prefere...

Freshwater savings from marine protein consumption

International Nuclear Information System (INIS)

Gephart, Jessica A; Pace, Michael L; D’Odorico, Paolo

2014-01-01

Marine fisheries provide an essential source of protein for many people around the world. Unlike alternative terrestrial sources of protein, marine fish production requires little to no freshwater inputs. Consuming marine fish protein instead of terrestrial protein therefore represents freshwater savings (equivalent to an avoided water cost) and contributes to a low water footprint diet. These water savings are realized by the producers of alternative protein sources, rather than the consumers of marine protein. This study quantifies freshwater savings from marine fish consumption around the world by estimating the water footprint of replacing marine fish with terrestrial protein based on current consumption patterns. An estimated 7 600 km 3  yr −1 of water is used for human food production. Replacing marine protein with terrestrial protein would require an additional 350 km 3  yr −1 of water, meaning that marine protein provides current water savings of 4.6%. The importance of these freshwater savings is highly uneven around the globe, with savings ranging from as little as 0 to as much as 50%. The largest savings as a per cent of current water footprints occur in Asia, Oceania, and several coastal African nations. The greatest national water savings from marine fish protein occur in Southeast Asia and the United States. As the human population increases, future water savings from marine fish consumption will be increasingly important to food and water security and depend on sustainable harvest of capture fisheries and low water footprint growth of marine aquaculture. (paper)

Fuel Savings and Aerodynamic Drag Reduction from Rail Car Covers

Science.gov (United States)

Storms, Bruce; Salari, Kambiz; Babb, Alex

2008-01-01

The potential for energy savings by reducing the aerodynamic drag of rail cars is significant. A previous study of aerodynamic drag of coal cars suggests that a 25% reduction in drag of empty cars would correspond to a 5% fuel savings for a round trip [1]. Rail statistics for the United States [2] report that approximately 5.7 billion liters of diesel fuel were consumed for coal transportation in 2002, so a 5% fuel savings would total 284 million liters. This corresponds to 2% of Class I railroad fuel consumption nationwide. As part of a DOE-sponsored study, the aerodynamic drag of scale rail cars was measured in a wind tunnel. The goal of the study was to measure the drag reduction of various rail-car cover designs. The cover designs tested yielded an average drag reduction of 43% relative to empty cars corresponding to an estimated round-trip fuel savings of 9%.

Energy Savings in a Market Economy

DEFF Research Database (Denmark)

Nørgaard, Jørgen

1998-01-01

The paper outlines the concept of energy savings as opposed to energy efficency. Afterwards are described briefly the up and down role of energy savings in recent Danish energy policy. It discusses the failure of leaving electricity savings and Integrated Resource Planning to the electricity...

Improved methods to evaluate realised energy savings

NARCIS (Netherlands)

Boonekamp, P.G.M.

2005-01-01

This thesis regards the calculation of realised energy savings at national and sectoral level, and the policy contribution to total savings. It is observed that the results of monitoring and evaluation studies on realised energy savings are hardly applied in energy saving policy. Causes are the lack

Mobile financial services and financial inclusion: Is it a boon for savings mobilization?

Directory of Open Access Journals (Sweden)

Shem Alfred Ouma

2017-06-01

Full Text Available The adoption of mobile telephony to provide financial services in Africa has become instrumental in integrating the hitherto unbanked segments of the population to the mainstream financial systems. This study sought to establish this linkage by examining whether the pervasive use of mobile telephony to provide financial services is a boon for savings mobilization in selected countries in sub Saharan Africa. The findings show that availability and usage of mobile phones to provide financial services promotes the likelihood of saving at the household level. Not only does access to mobile financial services boost the likelihood to save, but also has a significant impact on the amounts saved, perhaps due to the frequency and convenience with which such transactions can be undertaken using a mobile phone. Both forms of savings, that is, basic mobile phone savings stored in the phone and bank integrated mobile savings are likely to be promoted by use of mobile phones. Thus, growing and deepening the scope for mobile phone financial services is an avenue for promoting savings mobilization, especially among the poor and low income groups with constrained access to formal financial services.

Measured energy savings and cost-effectiveness of conservation retrofits in commercial buildings

International Nuclear Information System (INIS)

Greely, K.M.; Harris, J.P.; Hatcher, A.M.

1990-01-01

In this study, the authors examine the measured savings and cost-effectiveness of 447 commercial retrofit projects in the US, Canada, and Europe, representing over 1,700 buildings. For these projects, they examine savings and cost-effectiveness by building type and retrofit strategy, savings from individual measures, peak electric demand savings, comparisons of measured vs. predicted savings, and the persistence of savings in the years following a retrofit. Median annual site energy savings amounted to 20 kBtu/ft 2 , or 18% of whole-building usage; median retrofit cost was $0.56/ft 2 (1988 $), the median payback time was 3.1 years, and the median cost of conserved energy was $3.10/site MBtu. When examined by retrofit strategy, they found that projects with only HVAC and/or lighting retrofits had median payback times of one to three years, while those affecting the building shell, either alone or in combination with other types of measures, had payback times of five or more years. Projects in which only maintenance practices were changed typically saved 12% of their pre-retrofit consumption, often using in-house labor. Their research suggests that, despite significant savings and short payback times for the majority of projects, optimum savings are often not being achieved, due to limited owner willingness to invest in all cost-effective measures, as well as to improper retrofit installation and/or maintenance. A comprehensive understanding of energy management as a process is needed, including both inspection and commissioning of installed retrofits and ongoing tracking of energy consumption as an indicator of operating problems

49 CFR 173.219 - Life-saving appliances.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Life-saving appliances. 173.219 Section 173.219... Life-saving appliances. (a) A life-saving appliance, self-inflating or non-self-inflating, containing small quantities of hazardous materials that are required as part of the life-saving appliance must...

Saving in Sub-Saharan Africa

OpenAIRE

Ernest Aryeetey; Christopher Udry

2000-01-01

Gross domestic savings in Africa averaged only 8 percent of GDP in the 1980s, compared to 23 percent for Southeast Asia and 35 percent in the Newly Industrialized Economies. Aside from being generally low, saving rates in most of Africa have shown consistent decline over the last thirty years. These savings figures must be considered tentative, because they are derived as a residual in the national accounts from expenditure and production data that are themselves quite unreliable. Notwithstan...

Does energy labelling on residential housing cause energy savings? Working paper

Energy Technology Data Exchange (ETDEWEB)

Kjaerbye, V.H.

2008-12-15

More than 80% of energy used in households is dedicated to space heating. Large potential energy savings have been identified in the existing housing stock. Energy labelling of single-family houses is seen as an important instrument to provide new house owners with information on efficient energy saving investments that can be made on the house. This paper evaluates the effects of the Danish Energy Labelling Scheme on energy consumption in existing single-family houses with propensity score matching using actual consumption of energy and register data describing the houses and households. We do not find significant energy savings due to the Danish Energy Labelling Scheme. (Author)

Willingness to pay for energy-saving measures in residential buildings

International Nuclear Information System (INIS)

Banfi, Silvia; Farsi, Mehdi; Jakob, Martin; Filippini, Massimo

2008-01-01

This paper uses a choice experiment to evaluate the consumers' willingness to pay for energy-saving measures in Switzerland's residential buildings. These measures include air renewal (ventilation) systems and insulation of windows and facades. Two groups of respondents consisting respectively of 163 apartment tenants and 142 house owners were asked to choose between their housing status quo and each one of the several hypothetical situations with different attributes and prices. The estimation method is based on a fixed-effects logit model. The results suggest that the benefits of the energy-saving attributes are significantly valued by the consumers. These benefits include both individual energy savings and environmental benefits as well as comfort benefits namely, thermal comfort, air quality and noise protection. (author)

Mental health and retirement savings: Confounding issues with compounding interest.

Science.gov (United States)

Bogan, Vicki L; Fertig, Angela R

2018-02-01

The questionable ability of the U.S. pension system to provide for the growing elderly population combined with the rising number of people affected by depression and other mental health issues magnifies the need to understand how these household characteristics affect retirement. Mental health problems have a large and significant negative effect on retirement savings. Specifically, psychological distress is associated with decreasing the probability of holding retirement accounts by as much as 24 percentage points and decreasing retirement savings as a share of financial assets by as much as 67 percentage points. The magnitude of these effects underscores the importance of employer management policy and government regulation of these accounts to help ensure households have adequate retirement savings. Copyright © 2017 John Wiley & Sons, Ltd.

Tablet splitting and weight uniformity of half-tablets of 4 medications in pharmacy practice.

Science.gov (United States)

Tahaineh, Linda M; Gharaibeh, Shadi F

2012-08-01

Tablet splitting is a common practice for multiple reasons including cost savings; however, it does not necessarily result in weight-uniform half-tablets. To determine weight uniformity of half-tablets resulting from splitting 4 products available in the Jordanian market and investigate the effect of tablet characteristics on weight uniformity of half-tablets. Ten random tablets each of warfarin 5 mg, digoxin 0.25 mg, phenobarbital 30 mg, and prednisolone 5 mg were weighed and split by 6 PharmD students using a knife. The resulting half-tablets were weighed and evaluated for weight uniformity. Other relevant physical characteristics of the 4 products were measured. The average tablet hardness of the sampled tablets ranged from 40.3 N to 68.9 N. Digoxin, phenobarbital, and prednisolone half-tablets failed the weight uniformity test; however, warfarin half-tablets passed. Digoxin, warfarin, and phenobarbital tablets had a score line and warfarin tablets had the deepest score line of 0.81 mm. Splitting warfarin tablets produces weight-uniform half-tablets that may possibly be attributed to the hardness and the presence of a deep score line. Digoxin, phenobarbital, and prednisolone tablet splitting produces highly weight variable half-tablets. This can be of clinical significance in the case of the narrow therapeutic index medication digoxin.

Cost-Value Analysis and the SAVE: A Work in Progress, But an Option for Localised Decision Making?

Science.gov (United States)

Karnon, Jonathan; Partington, Andrew

2015-12-01

Cost-value analysis aims to address the limitations of the quality-adjusted life-year (QALY) by incorporating the strength of public concerns for fairness in the allocation of scarce health care resources. To date, the measurement of value has focused on equity weights to reflect societal preferences for the allocation of QALY gains. Another approach is to use a non-QALY-based measure of value, such as an outcome 'equivalent to saving the life of a young person' (a SAVE). This paper assesses the feasibility and validity of using the SAVE as a measure of value for the economic evaluation of health care technologies. A web-based person trade-off (PTO) survey was designed and implemented to estimate equivalent SAVEs for outcome events associated with the progression and treatment of early-stage breast cancer. The estimated equivalent SAVEs were applied to the outputs of an existing decision analytic model for early breast cancer. The web-based PTO survey was undertaken by 1094 respondents. Validation tests showed that 68 % of eligible responses revealed consistent ordering of responses and 32 % displayed ordinal transitivity, while 37 % of respondents showing consistency and ordinal transitivity approached cardinal transitivity. Using consistent and ordinally transitive responses, the mean incremental cost per SAVE gained was £ 3.72 million. Further research is required to improve the validity of the SAVE, which may include a simpler web-based survey format or a face-to-face format to facilitate more informed responses. A validated method for estimating equivalent SAVEs is unlikely to replace the QALY as the globally preferred measure of outcome, but the SAVE may provide a useful alternative for localized decision makers with relatively small, constrained budgets-for example, in programme budgeting and marginal analysis.

Energy saving synergies in national energy systems

DEFF Research Database (Denmark)

Thellufsen, Jakob Zinck; Lund, Henrik

2015-01-01

In the transition towards a 100% renewable energy system, energy savings are essential. The possibility of energy savings through conservation or efficiency increases can be identified in, for instance, the heating and electricity sectors, in industry, and in transport. Several studies point...... to various optimal levels of savings in the different sectors of the energy system. However, these studies do not investigate the idea of energy savings being system dependent. This paper argues that such system dependency is critical to understand, as it does not make sense to analyse an energy saving...... without taking into account the actual benefit of the saving in relation to the energy system. The study therefore identifies a need to understand how saving methods may interact with each other and the system in which they are conducted. By using energy system analysis to do hourly simulation...

Handling Dynamic Weights in Weighted Frequent Pattern Mining

Science.gov (United States)

Ahmed, Chowdhury Farhan; Tanbeer, Syed Khairuzzaman; Jeong, Byeong-Soo; Lee, Young-Koo

Even though weighted frequent pattern (WFP) mining is more effective than traditional frequent pattern mining because it can consider different semantic significances (weights) of items, existing WFP algorithms assume that each item has a fixed weight. But in real world scenarios, the weight (price or significance) of an item can vary with time. Reflecting these changes in item weight is necessary in several mining applications, such as retail market data analysis and web click stream analysis. In this paper, we introduce the concept of a dynamic weight for each item, and propose an algorithm, DWFPM (dynamic weighted frequent pattern mining), that makes use of this concept. Our algorithm can address situations where the weight (price or significance) of an item varies dynamically. It exploits a pattern growth mining technique to avoid the level-wise candidate set generation-and-test methodology. Furthermore, it requires only one database scan, so it is eligible for use in stream data mining. An extensive performance analysis shows that our algorithm is efficient and scalable for WFP mining using dynamic weights.

24 CFR 221.1 - Savings clause.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Savings clause. 221.1 Section 221.1... MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES LOW COST AND MODERATE INCOME MORTGAGE INSURANCE-SAVINGS CLAUSE Eligibility Requirements-Low Cost Homes-Savings Clause § 221.1...

Energy saving and cost saving cooling; Energie und Kosten sparende Kuehlung

Energy Technology Data Exchange (ETDEWEB)

Koenig, Klaus W. [Architektur- und Fachpressebuero Klaus W. Koenig, Ueberlingen (Germany)

2012-07-01

In the case of cost reduction, energy conservation and resource savings, rain water is an ideal medium offering more advantages in comparison to the cooling with drinking water. There are no fees for the drinking water and drainage of rain water. It is not necessary to soften rain water so that further operational costs for the treatment and drainage of waste water can be saved. The avoidance of the related material flows and necessary energy is a practiced environmental protection and climate protection.

The effects of perceived and actual financial knowledge on regular personal savings: Case of Vietnam

Directory of Open Access Journals (Sweden)

Thi Anh Nhu Nguyen

2017-06-01

Full Text Available The paper examines the factors, which affect decision-making on regular personal saving behaviour in the context of an emerging market in Vietnam. Focusing on financial literacy, the paper uses a combined measure of actual financial knowledge and a self-assessment of overall financial knowledge. The sample of the study consists of 240 commercial banks customers selected in 12 branches of four banks in Ho Chi Minh City. The questionnaire covers: (1 actual financial knowledge; (2 self-rating of financial knowledge; (3 financial risk tolerance; and (4 demographic characteristics of the respondents. The results of a logistic regression analysis show that perceived and actual financial literacy have separate effects on regular personal saving. Particularly, actual financial knowledge has a statistically significant positive relationship with regular personal saving with odds ratio higher than 6.5 times. However, perceived financial knowledge and financial risk tolerance factor are not statistically significant with regular personal saving. Finally, this paper offers evidence that the interaction variable, which is used to combine education level with their major study, has a statistically significant relationship with regular personal saving.

Energy saving potential in existing industrial compressors

International Nuclear Information System (INIS)

Vittorini, Diego; Cipollone, Roberto

2016-01-01

The Compressed Air Sector accounts for a mean 10% worldwide electricity consumption, which ensures about its importance, when energy saving and CO_2 emissions reduction are in question. Since the compressors alone account for 15% overall industry electricity consumption, it appears vital to pay attention to machine performances. The paper presents an overview of present compressor technology and focuses on saving directions for screw and sliding vanes machines, according to data provided by the Compressed Air and Gas Institute and PNEUROP. Data were processed to obtain consistency with fixed reference pressures and organized as a function of main operating parameters. Each sub-term, contributing to the overall efficiency (adiabatic, volumetric, mechanical, electric, organic), was considered separately: the analysis showed that the thermodynamic improvement during compression achievable by splitting the compression in two stages, with a lower compression ratio, opens the way to significantly reduce the energy specific consumption. - Highlights: • Compressors technology overview in industrial compressed air systems. • Market compressors efficiency baseline definition. • Energy breakdown and evaluation of main efficiency terms. • Assessment of air cooling-related energy saving potential. • Energy specific consumption reduction through dual stage compression.

Goal clarity and financial planning activities as determinants of retirement savings contributions.

Science.gov (United States)

Stawski, Robert S; Hershey, Douglas A; Jacobs-Lawson, Joy M

2007-01-01

Retirement counselors, financial service professionals, and retirement intervention specialists routinely emphasize the importance of developing clear goals for the future; however, few empirical studies have focused on the benefits of retirement goal setting. In the present study, the extent to which goal clarity and financial planning activities predict retirement savings practices was examined among 100 working adults. Path analysis techniques were used to test two competing models, both of which were designed to predict savings contributions. Findings provide support for the model in which retirement goal clarity is a significant predictor of planning practices, and planning, in turn, predicts savings tendencies. Two demographic variables-income and age-were also revealed to be important elements of the model, with income accounting for roughly half of the explained variance in savings contributions. The results of this study have implications for the development of age-based models of planning, as well as implications for retirement counselors and financial planners who advise workers on long-term saving strategies.

Energy Saving Glass Lamination via Selective Radio-Frequency Heating

Energy Technology Data Exchange (ETDEWEB)

Shulman, Holly S.; Allan, Shawn M.

2009-11-11

This Inventions and Innovations program supported the technical and commercial research and development needed to elevate Ceralink's energy saving process for flat glass lamination from bench scale to a self-supporting technology with significant potential for growth. Radio-frequency heating was any un-explored option for laminating glass prior to this program. With significant commercial success through time and energy savings in the wood, paper, and plastics industries, RF heating was found to have significant promise for the energy intensive glass lamination industry. A major technical goal of the program was to demonstrate RF lamination across a wide range of laminate sizes and materials. This was successfully accomplished, dispelling many skeptics' concerns about the abilities of the technology. Ceralink laminated panels up to 2 ft x 3 ft, with four sets processed simultaneously, in a 3 minute cycle. All major categories of interlayer materials were found to work with RF lamination. In addition to laminating glass, other materials including photovoltaic silicon solar cells, light emitting diodes, metallized glass, plastics (acrylic and polycarbonate), and ceramics (alumina) were found compatible with the RF process. This opens up a wide range of commercial opportunities beyond the initially targeted automotive industry. The dramatic energy savings reported for RF lamination at the bench scale were found to be maintained through the scale up of the process. Even at 2 ft x 3 ft panel sizes, energy savings are estimated to be at least 90% compared to autoclaving or vacuum lamination. With targeted promotion through conference presentations, press releases and internet presence, RF lamination has gained significant attention, drawing large audiences at American Ceramic Society meetings. The commercialization success of the project includes the establishment of a revenue-generating business model for providing process development and demonstrations for

'Nurture the sprouting bud; do not uproot it'. Using saving groups to save for maternal and newborn health: lessons from rural Eastern Uganda.

Science.gov (United States)

Ekirapa-Kiracho, Elizabeth; Paina, Ligia; Muhumuza Kananura, Rornald; Mutebi, Aloysius; Jane, Pacuto; Tumuhairwe, Juliet; Tetui, Moses; Kiwanuka, Suzanne N

2017-08-01

Saving groups are increasingly being used to save in many developing countries. However, there is limited literature about how they can be exploited to improve maternal and newborn health. This paper describes saving practices, factors that encourage and constrain saving with saving groups, and lessons learnt while supporting communities to save through saving groups. This qualitative study was done in three districts in Eastern Uganda. Saving groups were identified and provided with support to enhance members' access to maternal and newborn health. Fifteen focus group discussions (FGDs) and 18 key informant interviews (KIIs) were conducted to elicit members' views about saving practices. Document review was undertaken to identify key lessons for supporting saving groups. Qualitative data are presented thematically. Awareness of the importance of saving, safe custody of money saved, flexible saving arrangements and easy access to loans for personal needs including transport during obstetric emergencies increased willingness to save with saving groups. Saving groups therefore provided a safety net for the poor during emergencies. Poor management of saving groups and detrimental economic practices like gambling constrained saving. Efficient running of saving groups requires that they have a clear management structure, which is legally registered with relevant authorities and that it is governed by a constitution. Saving groups were considered a useful form of saving that enabled easy acess to cash for birth preparedness and transportation during emergencies. They are like 'a sprouting bud that needs to be nurtured rather than uprooted', as they appear to have the potential to act as a safety net for poor communities that have no health insurance. Local governments should therefore strengthen the management capacity of saving groups so as to ensure their efficient running through partnerships with non-governmental organizations that can provide support to such groups.

Federal Aviation Administration retained savings program proposal

International Nuclear Information System (INIS)

Hostick, D.J.; Larson, L.L.; Hostick, C.J.

1998-03-01

Federal legislation allows federal agencies to retain up to 50% of the savings associated with implementing energy efficiency and water conservation measures and practices. Given budget pressures to reduce expenditures, the use of retained savings to fund additional projects represents a source of funds outside of the traditional budget cycle. The Southwest Region Federal Aviation Administration (FAA) has tasked Pacific Northwest National Laboratory (PNNL) to develop a model retained savings program for Southwest Region FAA use and as a prototype for consideration by the FAA. PNNL recommends the following steps be taken in developing a Southwest Region FAA retained savings program: Establish a retained savings mechanism. Determine the level at which the retained savings should be consolidated into a fund. The preliminary recommendation is to establish a revolving efficiency loan fund at the regional level. Such a mechanism allows some consolidation of savings to fund larger projects, while maintaining a sense of facility ownership in that the funds will remain within the region

Barnacle geese achieve significant energetic savings by changing posture.

Science.gov (United States)

Tickle, Peter G; Nudds, Robert L; Codd, Jonathan R

2012-01-01

Here we report the resting metabolic rate in barnacle geese (Branta leucopsis) and provide evidence for the significant energetic effect of posture. Under laboratory conditions flow-through respirometry together with synchronous recording of behaviour enabled a calculation of how metabolic rate varies with posture. Our principal finding is that standing bipedally incurs a 25% increase in metabolic rate compared to birds sitting on the ground. In addition to the expected decrease in energy consumption of hindlimb postural muscles when sitting, we hypothesise that a change in breathing mechanics represents one potential mechanism for at least part of the observed difference in energetic cost. Due to the significant effect of posture, future studies of resting metabolic rates need to take into account and/or report differences in posture.

Values and Technologies in Energy Savings

DEFF Research Database (Denmark)

Nørgård, Jørgen Stig

2000-01-01

of this saving can cause what is called the rebound effect, which reduces the savings obtained from the technology. Ways to avoid this effect are suggested, and they require value changes, primarly around frugality, consumption, and hard-working. There are indications that some of the necessary changes are well......The chapter is based on the assumption, that technology improvement is not sufficient to achieve a sustainable world community. Changes in people´s values are necessary. A simple model suggest how values, together with basic needs and with the environmental and societal frames, determine people......´s behavioural pattern and lifestyles. Deliberate changes in social values are illustrated by a historical example. From the side of technology the basic principles in the economy of energy savings are briefly described. The marginally profitable energy savings provides an economic saving. The application...

Cost-effectiveness of sibutramine in the LOSE Weight Study: evaluating the role of pharmacologic weight-loss therapy within a weight management program.

Science.gov (United States)

Malone, Daniel C; Raebel, Marsha A; Porter, Julie A; Lanty, Frances A; Conner, Douglas A; Gay, Elizabeth C; Merenich, John A; Vogel, Erin A

2005-01-01

the cost-effectiveness of drug therapy when used in conjunction with a weight management program (WMP) for treatment of obesity. The objective was to compare the cost-effectiveness of sibutramine (Meridia) plus a structured WMP versus only a structured WMP in both overweight and obese individuals. The core WMP was a physician-supervised, multidisciplinary program for which each enrollee paid $100 out of pocket. A cost-effectiveness analysis was performed based upon the results of a previously published randomized controlled trial conducted within a managed care organization. The target population for this study was obese or overweight persons. The perspective of the study was that of a managed care organization. The intervention consisted of subjects receiving a WMP with or without sibutramine. The primary outcomes of this study were (a) absolute change in body weight and percentage change in body weight over 12 months, (b) change in obesity-related and total medical costs from 12 months prior to enrollment through 12 months after enrollment, and (c) cost-effectiveness in terms of cost per pound of weight loss. All costs were adjusted to 2004 dollars using the respective components of the consumer price index for each medical service or medication. A total of 501 evaluable subjects were enrolled in the study, with 281 receiving sibutramine plus a structured WMP and 220 receiving only the structured WMP. The meanSD weight loss was significantly greater in the sibutramine (13.715.5 pounds, 4.8%) group than in the nondrug group (513.2 pounds, 2.2%) (P cost was a median increase of $408 for the sibutramine group compared with $31 for the nondrug group (P cost was a median $1,279 increase in the sibutramine group compared with $271 for the nondrug group (P cost by $44 per additional pound of weight loss (95% confidence interval, 42-46). Sensitivity analyses found that the results were sensitive to the price of sibutramine, whereas varying the cost of clinic visits did

Quantifying the economic water savings benefit of water hyacinth ...

African Journals Online (AJOL)

Quantifying the economic water savings benefit of water hyacinth ... Value Method was employed to estimate the average production value of irrigation water, ... invasions of this nature, as they present significant costs to the economy and ...

Year-round daylight saving time will save more energy in India than corresponding DST or time zones

International Nuclear Information System (INIS)

Ahuja, Dilip R.; SenGupta, D.P.

2012-01-01

Many countries have experimented with daylight saving time (DST) to save energy and to align human activities more closely to the daily cycle of light and darkness. Using a novel methodology, we estimate the year-round energy savings to be obtained from advancing Indian Standard Time (IST), from the introduction of DST, and from dividing the country into two time zones. We find that the option of advancing IST consistently saves more energy than the corresponding DST option, which in turn saves more energy than the corresponding time zones option. This is because the energy benefits of advancing IST accrue for the entire year throughout the country, whereas the benefits of DST are confined to summer months and the benefits of two time zones are largely in the lower energy consuming eastern region. We recommend advancing IST by half-hour to being six hours ahead of UTC. This confers the advantages of DST and time zones without their disadvantages and is forecast to save more than 2 billion kWh of electricity every year during evening peaks that are difficult to supply. While these results are India-specific, similar exercises would be useful to many other countries. - Highlights: ► Advancing IST (YRDST) consistently saves more energy than the corresponding DST. ► DST consistently saves more energy than dividing India into two time zones. ► There are also many non-energy benefits of advancing IST. ► Results are for India; countries with DST may find it useful to consider YRDST.

Barnacle geese achieve significant energetic savings by changing posture.

Directory of Open Access Journals (Sweden)

Peter G Tickle

Full Text Available Here we report the resting metabolic rate in barnacle geese (Branta leucopsis and provide evidence for the significant energetic effect of posture. Under laboratory conditions flow-through respirometry together with synchronous recording of behaviour enabled a calculation of how metabolic rate varies with posture. Our principal finding is that standing bipedally incurs a 25% increase in metabolic rate compared to birds sitting on the ground. In addition to the expected decrease in energy consumption of hindlimb postural muscles when sitting, we hypothesise that a change in breathing mechanics represents one potential mechanism for at least part of the observed difference in energetic cost. Due to the significant effect of posture, future studies of resting metabolic rates need to take into account and/or report differences in posture.

Operational considerations in specifying legal weight vehicles for the highway transport of spent nuclear fuel

International Nuclear Information System (INIS)

Hill, C.V.; Rutenkroger, E.O.; Ratledge, J.E.

1990-01-01

This paper presents the results of a research project in which tractor manufacturers and carrier companies were interviewed to gather information on operational concerns in specifying a tractor to haul legal weight spent fuel casks. The interaction between driver fatigue,safety, and equipment is discussed, as are innovative operating strategies that could save weight

Pressure Regulators as Valves for Saving Compressed Air and their Influence on System Dynamics

Directory of Open Access Journals (Sweden)

Dvořák Lukáš

2015-01-01

Full Text Available Pressure regulators in the field of pneumatic mechanisms can be used as valves for saving compressed air. For example it can be used to reduce the pressure when the piston rod is retracting unloaded and thus it is possible to save some energy. However the problem is that saving valve can significantly affect the dynamics of the pneumatic system. The lower pressure in the piston rod chamber causes extension of time for retraction of the piston rod. This article compare the air consumption experimentally determined and calculated, measured curves of pressure in cylinder chambers and piston speed when saving valve is set up differently.

Pressure Regulators as Valves for Saving Compressed Air and their Influence on System Dynamics

Science.gov (United States)

Dvořák, Lukáš; Fojtášek, Kamil

2015-05-01

Pressure regulators in the field of pneumatic mechanisms can be used as valves for saving compressed air. For example it can be used to reduce the pressure when the piston rod is retracting unloaded and thus it is possible to save some energy. However the problem is that saving valve can significantly affect the dynamics of the pneumatic system. The lower pressure in the piston rod chamber causes extension of time for retraction of the piston rod. This article compare the air consumption experimentally determined and calculated, measured curves of pressure in cylinder chambers and piston speed when saving valve is set up differently.

Streamlined energy-savings calculations for heat-island reduction strategies

Energy Technology Data Exchange (ETDEWEB)

Akbari, Hashem; Konopacki, Steven J.

2003-03-15

. For residences heated with electricity, the savings ranged from 350 to 1300 kWh/1000ft2 for Pre-1980 stock and 190-600 kWh/1000ft2 for 1980+ stocks. In climates with less than 1000 cooling-degree-days, the electricity savings were not significantly higher than winter heating penalties. For gas-heated office buildings, simulations indicated electricity savings in the range of 1100-1500 kWh/1000ft2 and 360-700 kWh/1000ft2, for Pre-1980 and 1980+ stocks, respectively. For electrically heated office buildings, simulations indicated electricity savings in the range of 700-1400 kWh/1000ft2 and 100-700 kWh/1000ft2, for Pre-1980 and 1980+ stocks, respectively. Similarly, for gas-heated retail store buildings, simulations indicated electricity savings in the range of 1300-1700 kWh/1000ft2 and 370-750 kWh/1000ft2, for Pre-1980 and 1980+ stocks, respectively. For electrically heated retail store buildings, simulations indicated electricity savings in the range of 1200-1700 kWh/1000ft2 and 250-750 kW h/1000ft2, for Pre-1980 and 1980 + stocks, respectively.

Energy savings in Danish residential building stock

DEFF Research Database (Denmark)

Tommerup, Henrik M.; Svendsen, Svend

2006-01-01

a short account of the technical energy-saving possibilities that are present in existing dwellings and presents a financial methodology used for assessing energy-saving measures. In order to estimate the total savings potential detailed calculations have been performed in a case with two typical...... buildings representing the residential building stock and based on these calculations an assessment of the energy-saving potential is performed. A profitable savings potential of energy used for space heating of about 80% is identified over 45 years (until 2050) within the residential building stock......A large potential for energy savings exists in the Danish residential building stock due to the fact that 75% of the buildings were constructed before 1979 when the first important demands for energy performance of building were introduced. It is also a fact that many buildings in Denmark face...

Effects of work participation, intergenerational transfers and savings on life satisfaction of older Malaysians.

Science.gov (United States)

Ng, Sor-Tho; Hamid, Tengku-Aizan

2013-12-01

To examine the effects of work participation, intergenerational transfers and savings on the life satisfaction of older community-dwelling Malaysians. Data from the 1999 Survey on Perceptions of Needs and Problems of the Elderly on people aged 60 and over were used. The life satisfaction score was constructed from 10 questions adopted from the Life Satisfaction Inventory-A by Neugarten, Havighurst and Tobin. Multiple regression analysis was used to estimate the expected level of life satisfaction. Controlling for other variables in the model, respondents who provided assistance to and received assistance from children with savings had significantly higher life satisfaction than their counterparts, while work participation did not have any significant effect on life satisfaction. Intergenerational transfers and savings are important predictors of life satisfaction. The interdependence between generations should remain and savings habits need to be cultivated to ensure a higher life satisfaction in old age. © 2012 The Authors. Australasian Journal on Ageing © 2012 ACOTA.

Difficulty eating and significant weight loss in joint hypermobility syndrome/Ehlers-Danlos syndrome, hypermobility type.

Science.gov (United States)

Baeza-Velasco, Carolina; Van den Bossche, Thomas; Grossin, Daniel; Hamonet, Claude

2016-06-01

Joint Hypermobility Syndrome, also known as Ehlers-Danlos Syndrome Hypermobility Type (JHS/EDS-HT), is a heritable disorder of connective tissue, common but poorly known by the medical community. Although generalized joint hypermobility and fragility of tissues have been described as core features, recent research highlights the multisystemic nature of JHS/EDS-HT, which presents with a wide range of articular and extra-articular symptoms. Among these, gastrointestinal problems, temporomandibular disorders, and smell and taste abnormalities are common among those affected, having significant implications for eating. The present work reviews the literature linking JHS/EDS-HT and eating problems. Two illustrative case reports, in which JHS/EDS-HT manifestations contribute to developing and maintaining disturbed eating behaviors and significant weight loss, are presented.

Clinically significant and sustained weight loss is achievable in obese women with polycystic ovary syndrome followed in a regular medical practice.

Science.gov (United States)

Pelletier, Lysanne; Baillargeon, Jean-Patrice

2010-12-01

To determine the proportion of obese women with polycystic ovary syndrome (PCOS) losing clinically significant amounts of weight during a standard follow-up by an endocrinologist. Retrospective cohort study. Reproductive Endocrinology Clinic of an academic center. Obese patients with PCOS assessed between May 2002 and September 2008. General nonstandardized advice on weight loss and exercise. Proportion of women losing ≥5% or ≥10% of their initial weight at each of the following time interval: 2-6 months, 6-12 months, 12-18 months, 18-24 months, 24-36 months, and beyond 36 months. One hundred seventeen patients with PCOS and with a mean body mass index (BMI) of 38.7 kg/m(2) and mean age of 28.5 years were followed-up for a median duration of 21.9 months (range, 2.0-61.8 months), with a median of two visits per year. More than 40% of these women lost ≥5% of their initial weight after >6 months of follow-up, and ≥20% lost ≥10% after 1 year of follow-up. More important, these proportions were maintained up to ≥3 years. It is possible for obese women with PCOS to achieve clinically significant and sustained weight loss by following simple advices given in a regular clinical care setting. Therefore, practitioners should not underestimate their impact to facilitate weight loss in women with PCOS. Copyright © 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Stakeholders’ influence on the adoption of energy-saving technologies in Italian homes

International Nuclear Information System (INIS)

Berardi, Umberto

2013-01-01

The instability and fragmentation of the temporary aggregations of many stakeholders in construction processes are barriers to adopting new technologies. This paper investigates the influence of different stakeholders on the adoption of mature energy-saving technologies in new residential buildings. Recent literature about the influence of different stakeholders on construction processes is reviewed focusing in their interest for energy saving technologies. To gain an insight into the specific roles played by stakeholders (general contractors, construction firms, architects, users and public governments) in different projects, a case study methodology was used. The influence on the adoption of energy-saving technologies of stakeholders was assessed through semi-structured interviews. These interviews focused on the interest and power for the adoption of several energy-saving technologies. Having recognized that the interest in adoption is often expressed late in the construction processes, the time of introduction of this interest was assessed. This paper provides an empirical insight into significant barriers for the adoption of energy saving technologies which are the low influence of highly motivated stakeholders on the decision of adoption, and the delay at which the interest in energy-saving technologies emerges. Finally, policies to overcome these barriers are suggested. - Highlights: • Why energy saving technologies are rarely adopted in buildings? • Diffusion is slowed by the late participation of stakeholders with great interest for energy technologies. • The influence of construction stakeholders for the adoption of energy saving technologies is measured in Italian case studies. • More integrated relationships among stakeholders are required to help the adoption of energy saving technologies. • Process re-organizations and policies which increase final users’ power are needed

Consumer behaviours: Teaching children to save energy

Science.gov (United States)

Grønhøj, Alice

2016-08-01

Energy-saving programmes are increasingly targeted at children to encourage household energy conservation. A study involving the assignment of energy-saving interventions to Girl Scouts shows that a child-focused intervention can improve energy-saving behaviours among children and their parents.

Structural changes in the knee during weight loss maintenance after a significant weight loss in obese patients with osteoarthritis

DEFF Research Database (Denmark)

Henriksen, M; Christensen, R; Hunter, D J

2014-01-01

OBJECTIVE: To compare structural knee joint changes in obese patients with knee osteoarthritis (OA) that after an intensive weight loss therapy were randomized to continuous dietetic support, a specialized knee exercise program, or 'no attention' for 1 year. METHODS: 192 obese individuals with knee...... OA underwent an intensive 16-week weight loss program with subsequent randomization to one of the three treatment groups. Changes in cartilage loss, bone marrow lesions (BMLs), synovitis, and effusion were assessed using semi quantitative assessments of magnetic resonance imaging (MRI) obtained...... (difference: -0.21 [95%CI -0.40:-0.03]) and "no attention" (difference: -0.26 [95%CI -0.44:-0.07]) groups. CONCLUSION: In this 1 year follow-up after weight-loss in obese knee OA patients, we found a potentially increased number of BMLs in the exercise group compared to the diet and no attention groups...

Determinants of success in Shared Savings Programs: An analysis of ACO and market characteristics.

Science.gov (United States)

Ouayogodé, Mariétou H; Colla, Carrie H; Lewis, Valerie A

2017-03-01

Medicare's Accountable Care Organization (ACO) programs introduced shared savings to traditional Medicare, which allow providers who reduce health care costs for their patients to retain a percentage of the savings they generate. To examine ACO and market factors associated with superior financial performance in Medicare ACO programs. We obtained financial performance data from the Centers for Medicare and Medicaid Services (CMS); we derived market-level characteristics from Medicare claims; and we collected ACO characteristics from the National Survey of ACOs for 215 ACOs. We examined the association between ACO financial performance and ACO provider composition, leadership structure, beneficiary characteristics, risk bearing experience, quality and process improvement capabilities, physician performance management, market competition, CMS-assigned financial benchmark, and ACO contract start date. We examined two outcomes from Medicare ACOs' first performance year: savings per Medicare beneficiary and earning shared savings payments (a dichotomous variable). When modeling the ACO ability to save and earn shared savings payments, we estimated positive regression coefficients for a greater proportion of primary care providers in the ACO, more practicing physicians on the governing board, physician leadership, active engagement in reducing hospital re-admissions, a greater proportion of disabled Medicare beneficiaries assigned to the ACO, financial incentives offered to physicians, a larger financial benchmark, and greater ACO market penetration. No characteristic of organizational structure was significantly associated with both outcomes of savings per beneficiary and likelihood of achieving shared savings. ACO prior experience with risk-bearing contracts was positively correlated with savings and significantly increased the likelihood of receiving shared savings payments. In the first year, performance is quite heterogeneous, yet organizational structure does not

Analyzing Vehicle Fuel Saving Opportunities through Intelligent Driver Feedback

Energy Technology Data Exchange (ETDEWEB)

Gonder, J.; Earleywine, M.; Sparks, W.

2012-06-01

Driving style changes, e.g., improving driver efficiency and motivating driver behavior changes, could deliver significant petroleum savings. This project examines eliminating stop-and-go driving and unnecessary idling, and also adjusting acceleration rates and cruising speeds to ideal levels to quantify fuel savings. Such extreme adjustments can result in dramatic fuel savings of over 30%, but would in reality only be achievable through automated control of vehicles and traffic flow. In real-world driving, efficient driving behaviors could reduce fuel use by 20% on aggressively driven cycles and by 5-10% on more moderately driven trips. A literature survey was conducted of driver behavior influences, and pertinent factors from on-road experiments with different driving styles were observed. This effort highlighted important driver influences such as surrounding vehicle behavior, anxiety over trying to get somewhere quickly, and the power/torque available from the vehicle. Existing feedback approaches often deliver efficiency information and instruction. Three recommendations for maximizing fuel savings from potential drive cycle improvement are: (1) leveraging applications with enhanced incentives, (2) using an approach that is easy and widely deployable to motivate drivers, and (3) utilizing connected vehicle and automation technologies to achieve large and widespread efficiency improvements.

Energy-Saving Melting and Revert Reduction Technology (E-SMARRT): Lost Foam Thin Wall - Feasibility of Producing Lost Foam Castings in Aluminum and Magnesium Based Alloys

Energy Technology Data Exchange (ETDEWEB)

Fasoyinu, Yemi [CanmetMATERIALS; Griffin, John A. [University of Alabama - Birmingham

2014-03-31

With the increased emphasis on vehicle weight reduction, production of near-net shape components by lost foam casting will make significant inroad into the next-generation of engineering component designs. The lost foam casting process is a cost effective method for producing complex castings using an expandable polystyrene pattern and un-bonded sand. The use of un-bonded molding media in the lost foam process will impose less constraint on the solidifying casting, making hot tearing less prevalent. This is especially true in Al-Mg and Al-Cu alloy systems that are prone to hot tearing when poured in rigid molds partially due to their long freezing range. Some of the unique advantages of using the lost foam casting process are closer dimensional tolerance, higher casting yield, and the elimination of sand cores and binders. Most of the aluminum alloys poured using the lost foam process are based on the Al-Si system. Very limited research work has been performed with Al-Mg and Al-Cu type alloys. With the increased emphasis on vehicle weight reduction, and given the high-strength-to-weight-ratio of magnesium, significant weight savings can be achieved by casting thin-wall (≤ 3 mm) engineering components from both aluminum- and magnesium-base alloys.

ONU Power Saving Scheme for EPON System

Science.gov (United States)

Mukai, Hiroaki; Tano, Fumihiko; Tanaka, Masaki; Kozaki, Seiji; Yamanaka, Hideaki

PON (Passive Optical Network) achieves FTTH (Fiber To The Home) economically, by sharing an optical fiber among plural subscribers. Recently, global climate change has been recognized as a serious near term problem. Power saving techniques for electronic devices are important. In PON system, the ONU (Optical Network Unit) power saving scheme has been studied and defined in XG-PON. In this paper, we propose an ONU power saving scheme for EPON. Then, we present an analysis of the power reduction effect and the data transmission delay caused by the ONU power saving scheme. According to the analysis, we propose an efficient provisioning method for the ONU power saving scheme which is applicable to both of XG-PON and EPON.

On the methodological approaches to the study of saving behavior of the population

Directory of Open Access Journals (Sweden)

Galina Vadimovna Belekhova

2015-03-01

Full Text Available The task to ensure effective functioning of all systems in the society and sustainable economic growth requires significant amounts of investment resources, which include savings of the population. This involves identification of the amount of funds accumulated by the population and studies of the characteristics of its saving behavior. The article reveals advantages and disadvantages of the main methodological approaches to the research in saving behavior and gives a comparative analysis of methods on the basis of official statistical information. As for Russia income is a key factor in saving behavior, the article also addresses the problem of assessing the degree of income differentiation of saving behavior. For this purpose we have used a method of household budgets sample surveys on the basis of which we have calculated and analyzed key performance indicators of savings behavior of households, including in the context of groups with different income levels. Unlike previous works on the topic, our study uses available resources (not money income as a basis for the calculation of saving behavior indicators, as they more fully characterize funds of low-income households, which are mostly represented in the budget surveys sample. The performed analysis has helped identify that the degree of the population’s savings differentiation does not yield to the incomes differentiation, and the highest levels of savings and used financial assets belong to the well-to-do group. What is more, the growth in per capita income has not encouraged the poor to save. Thus, in contrast to the well-to-do, increasing the volume of savings in the cost structure, poorer groups direct the major part of funds for consumer needs and different payments. Thus, the share of savings in the overall structure of their income remains practically unchanged. The conclusion emphasizes that sociological methods can be used to study qualitative changes in saving behavior and

Early weight loss predicts weight loss treatment response regardless of binge-eating disorder status and pretreatment weight change.

Science.gov (United States)

Barnes, Rachel D; Ivezaj, Valentina; Pittman, Brian P; Grilo, Carlos M

2018-04-10

Individuals seeking weight loss treatment have diverse pretreatment weight trajectories, and once enrolled, individuals' response to weight loss treatments also varies greatly and may be influenced by the presence of binge-eating disorder (BED). Reported average weight losses may obscure these considerable differences. This study examined whether BED status and different weight-related change variables are associated with successful weight loss treatment outcomes in a controlled treatment study. Participants (N = 89) with overweight/obesity, with and without BED, participated in a 3-month weight loss trial in primary care with 3- and 12-month follow-ups. We tested the prognostic significance of four weight-related change variables (the last supper, early weight loss, pretreatment weight trajectory, weight suppression) on outcomes (weight loss-overall, weight loss-"subsequent," weight loss during second half of treatment). Early weight loss was positively associated with weight loss-overall at post-treatment, and at 3-month and 12-month follow-up. Early weight loss was positively associated with weight loss-subsequent at post-treatment only. No other weight-related variables were significantly associated with weight loss. Models including BED status and treatment condition were not significant. Participants with early weight loss were more likely to continue losing weight, regardless of BED status or treatment condition. The results highlight the importance of early dedication to weight loss treatment to increase the likelihood of positive outcomes. © 2018 Wiley Periodicals, Inc.

Contribution of promoting the green residence assessment scheme to energy saving

International Nuclear Information System (INIS)

Huang, Zhiyu; Yuan, Hongping; Shen, Liyin

2012-01-01

Green residence development has been one of the important strategies for promoting sustainable urban development. Governments throughout the world have been encouraging property developers to deliver green properties. In line with this development, governments have been implementing various assessment programs to certify green residential buildings with the aim of contributing to sustainable urban development. With reference to the Chinese construction practice, this paper examines the effectiveness of the green residence assessment scheme toward its defined aim through investigating the contents and procedures of the green residence assessment scheme by referring to the practices of Chongqing city in western China. Based on the results of five case studies and five semi-structured interviews, this study reveals the significant contribution from implementing the green residence assessment scheme particularly to energy saving in residential buildings. Further, the green residence assessment scheme promotes the application of green building materials and green construction technologies in the entire process of delivering and operating residential buildings. The findings provide valuable references for further investigating alternative methods to achieve better energy saving in developing residential buildings. - Highlights: ► Energy saving in residence development is important for sustainable urban development. ► Green residence assessment scheme contributes significantly to energy saving in residences. ► Green residence assessment promotes application of environmentally friendly building materials and technologies

12 CFR 541.18 - Interim Federal savings association.

Science.gov (United States)

2010-01-01

... an existing savings and loan holding company or to facilitate any other transaction the Office may... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Interim Federal savings association. 541.18... REGULATIONS AFFECTING FEDERAL SAVINGS ASSOCIATIONS § 541.18 Interim Federal savings association. The term...

Energy Savings Forecast of Solid-State Lighting in General Illumination Applications

Energy Technology Data Exchange (ETDEWEB)

none,

2014-08-29

With declining production costs and increasing technical capabilities, LED adoption has recently gained momentum in general illumination applications. This is a positive development for our energy infrastructure, as LEDs use significantly less electricity per lumen produced than many traditional lighting technologies. The U.S. Department of Energy’s Energy Savings Forecast of Solid-State Lighting in General Illumination Applications examines the expected market penetration and resulting energy savings of light-emitting diode, or LED, lamps and luminaires from today through 2030.

A meta model-based methodology for an energy savings uncertainty assessment of building retrofitting

Directory of Open Access Journals (Sweden)

Caucheteux Antoine

2016-01-01

Full Text Available To reduce greenhouse gas emissions, energy retrofitting of building stock presents significant potential for energy savings. In the design stage, energy savings are usually assessed through Building Energy Simulation (BES. The main difficulty is to first assess the energy efficiency of the existing buildings, in other words, to calibrate the model. As calibration is an under determined problem, there is many solutions for building representation in simulation tools. In this paper, a method is proposed to assess not only energy savings but also their uncertainty. Meta models, using experimental designs, are used to identify many acceptable calibrations: sets of parameters that provide the most accurate representation of the building are retained to calculate energy savings. The method was applied on an existing office building modeled with the TRNsys BES. The meta model, using 13 parameters, is built with no more than 105 simulations. The evaluation of the meta model on thousands of new simulations gives a normalized mean bias error between the meta model and BES of <4%. Energy savings are assessed based on six energy savings concepts, which indicate savings of 2–45% with a standard deviation ranging between 1.3% and 2.5%.

Simulation to coating weight control for galvanizing

Science.gov (United States)

Wang, Junsheng; Yan, Zhang; Wu, Kunkui; Song, Lei

2013-05-01

Zinc coating weight control is one of the most critical issues for continuous galvanizing line. The process has the characteristic of variable-time large time delay, nonlinear, multivariable. It can result in seriously coating weight error and non-uniform coating. We develop a control system, which can automatically control the air knives pressure and its position to give a constant and uniform zinc coating, in accordance with customer-order specification through an auto-adaptive empirical model-based feed forward adaptive controller, and two model-free adaptive feedback controllers . The proposed models with controller were applied to continuous galvanizing line (CGL) at Angang Steel Works. By the production results, the precise and stability of the control model reduces over-coating weight and improves coating uniform. The product for this hot dip galvanizing line does not only satisfy the customers' quality requirement but also save the zinc consumption.

12 CFR 583.20 - Savings and loan holding company.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Savings and loan holding company. 583.20... REGULATIONS AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.20 Savings and loan holding company. The term savings and loan holding company means any company that directly or indirectly controls a savings...

Macroeconomic determinants of savings in Egypt "Statistical Model"

Directory of Open Access Journals (Sweden)

Hanaa Abdelaty Hasan Esmail

2014-07-01

Full Text Available Like lot of countries, aggregate consumption constitutes a major portion of Gross Domestic Product (GDP in Egypt. Consumption decisions determine savings decisions. In long term growth literature, differences in long term growth had been explained to a large extent by differences in the rates of savings which also determine a country’s investment in productive capacity, human capital and socio-economic infrastructure. In this study, we analyse macroeconomic determinants of savings in Egypt using Ordinary multiple regression. Our results indicate that national savings rate is positively related with real GDP growth rate. This suggests that saving is a positive function of income. The evidence suggests that national savings rate is negatively related with federal debt growth and inflation. This hints towards crowding out of private sector investment through decline in savings rate as a result of government’s indebtedness. Finally, negative association between savings rate and inflation implies that the consumer is rational and makes decisions based on his perceptions when it comes to allocating the lifetime resources over the period of his life. Increase in inflation dampens the incentive to save and people respond rationally which is made evident by the negative sign on inflation coefficient in our model.

The observation of leptin levels in pregnant women newborn and newborn's weight and its clinical significance

International Nuclear Information System (INIS)

Yuan Gengbiao; Xiao Jin; Shi Xin; Chen Xuehong

2002-01-01

To study the relationship of leptin quantity of placenta, amniotic fluid, umbilical blood, maternal blood and newborn's weight, leptin levels of placenta, amniotic fluid, umbilical blood and maternal blood of 59 pregnant women were detected by RIA. Results were: (1) leptin was be detected from placenta, amniotic fluid, umbilical blood and maternal blood; (2) there was an obvious difference between leptin quantities of placenta, amniotic fluid, umbilical blood and maternal blood (P < 0.01); (3) there was an obvious difference between leptin quantities of placenta, amniotic fluid, umbilical blood and maternal blood for normal pregnant women and pregnancy induced hypertension (P < 0.01); (4) there was an obvious difference between leptin quantities of maternal blood and placenta (P < 0.01). It may be of important significance to detect eh leptin quantity of amniotic fluid and maternal blood in pregnant women for predicting the weight and growth of newborns and treat pregnancy induced hypertension

Cogeneration an opportunity for industrial energy saving

International Nuclear Information System (INIS)

Pasha, R.A.; Butt, Z.S.

2011-01-01

This paper is about the cogeneration from industrial energy savings opportunities perspective. The energy crisis in these days forces industry to find ways to cope with critical situation. There are several energy savings options which if properly planned and implemented would be beneficial both for industry and community. One way of energy saving is Cogeneration i.e. Combined Heat and Power. The paper will review the basic methods, types and then discuss the suitability of these options for specific industry. It has been identified that generally process industry can get benefits of energy savings. (author)

Are Women Empowered to Save?

Directory of Open Access Journals (Sweden)

Frances Woolley

2013-12-01

Full Text Available Female economic empowerment – rising earnings, increased opportunities, greater labour force participation – has given many women the means to save. The shifting of responsibility for retirement security from employers and governments onto individuals has given women a reason to save. But are women actually saving? In this paper, we explore the relationship between the gender dynamics within a family and the accumulation of wealth. We find that little evidence in support of the conventional wisdom that families with a female financial manager save more and repay their debts more often. We find some evidence that male financial management leads to greater savings, and other evidence suggesting that savings patterns have a complex relationship with intra-family gender dynamics. El empoderamiento económico de la mujer – el aumento de los ingresos, mayores oportunidades, mayor participación laboral – ha dado a muchas mujeres los medios para ahorrar. Al pasar la responsabilidad de los ingresos de la jubilación de los empleadores y el gobierno a los individuos ha dado a las mujeres un motivo para ahorrar. ¿Pero realmente ahorran las mujeres? En este artículo se analizan las relaciones entre las dinámicas de género en una familia, y la acumulación de riqueza. Se ha llegado a la conclusión de que hay poca evidencia que apoye la creencia convencional de que las familias en las que una mujer gestiona las financias ahorran más y devuelven sus créditos más frecuentemente. Se ha encontrado alguna evidencia de que la gestión financiera por varones acarrea mayores ahorros, y otras evidencias que sugieren que los patrones de ahorro tienen una relación compleja con las dinámicas de género dentro de la familia.

Household water saving: Evidence from Spain

Science.gov (United States)

Aisa, Rosa; Larramona, Gemma

2012-12-01

This article focuses on household water use in Spain by analyzing the influence of a detailed set of factors. We find that, although the presence of both water-saving equipment and water-conservation habits leads to water savings, the factors that influence each are not the same. In particular, our results show that those individuals most committed to the adoption of water-saving equipment and, at the same time, less committed to water-conservation habits tend to have higher incomes.

Feeding your piggy bank with intentions : A study on saving behaviour, saving strategies, and happiness

NARCIS (Netherlands)

De Francisco Vela, S.; Desmet, P.M.A.; Casais, M.

2014-01-01

The act of saving money can connect one’s present state to a meaningful future state, especially if we consider money not as a direct source of happiness, but as a resource for engaging in meaningful activities. To explore how design can contribute to making the act of saving more meaningful, we

Saving electricity in a hurry - update 2011

Energy Technology Data Exchange (ETDEWEB)

Pasquier, Sara Bryan

2011-06-15

As demonstrated by the March 2011 earthquake and tsunami-triggered blackouts in Japan, electricity shortfalls can happen anytime and anywhere. Countries can minimise the negative economic, social and environmental impacts of such electricity shortfalls by developing emergency energy-saving strategies before a crisis occurs. This new IEA report highlights preliminary findings and conclusions from electricity shortfalls in Japan, the United States, New Zealand, South Africa and Chile. It draws on recent analysis to: reinforce well-established guidelines on diagnosing electricity shortfalls, identifying energy-saving opportunities and selecting a package of energy-saving measures; and highlight proven practice for implementing emergency energy-saving programmes. This paper will be valuable to government, academic, private-sector and civil-society stakeholders who inform, develop and implement electricity policy in general, and emergency energy-saving programmes in particular.

RECRUITMENT FINANCED BY SAVED LEAVE (RSL PROGRAMME)

CERN Multimedia

Division du Personnel; Tel. 73903

1999-01-01

Transfer to the saved leave account and saved leave bonusStaff members participating in the RSL programme may opt to transfer up to 10 days of unused annual leave or unused compensatory leave into their saved leave account, at the end of the leave year, i.e. 30 September (as set out in the implementation procedure dated 27 August 1997).A leave transfer request form, which you should complete, sign and return, if you wish to use this possibility, has been addressed you. To allow the necessary time for the processing of your request, you should return it without delay.As foreseen in the implementation procedure, an additional day of saved leave will be granted for each full period of 20 days remaining in the saved leave account on 31 December 1999, for any staff member participating in the RSL programme until that date.For part-time staff members participating in the RSL programme, the above-mentioned days of leave (annual, compensatory and saved) are adjusted proportionally to their contractual working week as...

Chinese hotel general managers' perspectives on energy-saving practices

Science.gov (United States)

Zhu, Yidan

As hotels' concern about sustainability and budget-control is growing steadily, energy-saving issues have become one of the important management concerns hospitality industry face. By executing proper energy-saving practices, previous scholars believed that hotel operation costs can decrease dramatically. Moreover, they believed that conducting energy-saving practices may eventually help the hotel to gain other benefits such as an improved reputation and stronger competitive advantage. The energy-saving issue also has become a critical management problem for the hotel industry in China. Previous research has not investigated energy-saving in China's hotel segment. To achieve a better understanding of the importance of energy-saving, this document attempts to present some insights into China's energy-saving practices in the tourist accommodations sector. Results of the study show the Chinese general managers' attitudes toward energy-saving issues and the differences among the diverse hotel managers who responded to the study. Study results indicate that in China, most of the hotels' energy bills decrease due to the implementation of energy-saving equipments. General managers of hotels in operation for a shorter period of time are typically responsible for making decisions about energy-saving issues; older hotels are used to choosing corporate level concerning to this issue. Larger Chinese hotels generally have official energy-saving usage training sessions for employees, but smaller Chinese hotels sometimes overlook the importance of employee training. The study also found that for the Chinese hospitality industry, energy-saving practices related to electricity are the most efficient and common way to save energy, but older hotels also should pay attention to other ways of saving energy such as water conservation or heating/cooling system.

Community Savings Groups, Financial Security, and HIV Risk Among Female Sex Workers in Iringa, Tanzania.

Science.gov (United States)

Mantsios, Andrea; Galai, Noya; Mbwambo, Jessie; Likindikoki, Samuel; Shembilu, Catherine; Mwampashi, Ard; Beckham, S W; Leddy, Anna; Davis, Wendy; Sherman, Susan; Kennedy, Caitlin; Kerrigan, Deanna

2018-02-24

This study assessed the association between community savings group participation and consistent condom use (CCU) among female sex workers (FSW) in Iringa, Tanzania. Using cross-sectional data from a survey of venue-based FSW (n = 496), logistic regression was used to examine the associations between financial indicators including community savings group participation and CCU. Over one-third (35%) of the women participated in a savings group. Multivariable regression results indicated that participating in a savings group was significantly associated with nearly two times greater odds of CCU with new clients in the last 30 days (aOR = 1.77, 95% CI 1.10-2.86). Exploratory mediation analysis indicated that the relationship between savings group participation and CCU was partially mediated by financial security, as measured by monthly income. Findings indicate that community savings groups may play an important role in reducing sexual risk behaviors of FSW and hold promise as part of comprehensive, community-led HIV prevention strategies among FSW.

Poor Families Striving to Save in Matched Children's Savings Accounts: Findings from a Randomized Experimental Design in Uganda.

Science.gov (United States)

Karimli, Leyla; Ssewamala, Fred M; Neilands, Torsten B

2014-12-01

This study examines participants' savings in children's savings accounts (CSAs) set up for AIDS-orphaned children ages 10-15 in Uganda. Using a cluster randomized experimental design, we examine the extent to which families participating in a CSA program report more savings than their counterparts not participating in the program, explore the extent to which families who participate in the CSA program report using formal financial institutions compared with families who do not have a CSA, and consider whether families participating in the CSA program bring new money into the CSA or whether they reshuffle existing household assets. We find that participating in a CSA increased families' likelihood to report having saved money. However, our results show no intervention effect either on the amount of self-reported savings or on the likelihood of using formal financial institutions. Further research is needed to understand whether use of a CSA helps families generate new wealth.

Barnacle Geese Achieve Significant Energetic Savings by Changing Posture

OpenAIRE

Tickle, Peter G.; Nudds, Robert L.; Codd, Jonathan R.

2012-01-01

Here we report the resting metabolic rate in barnacle geese (Branta leucopsis) and provide evidence for the significant energetic effect of posture. Under laboratory conditions flow-through respirometry together with synchronous recording of behaviour enabled a calculation of how metabolic rate varies with posture. Our principal finding is that standing bipedally incurs a 25% increase in metabolic rate compared to birds sitting on the ground. In addition to the expected decrease in energy con...

Association with Mortality and Heritability of the Scale of Aging Vigor in Epidemiology (SAVE)

Science.gov (United States)

Sanders, Jason L.; Singh, Jatinder; Minster, Ryan L.; Walston, Jeremy D.; Matteini, Amy M.; Christensen, Kaare; Mayeux, Richard; Borecki, Ingrid B.; Perls, Thomas; Newman, Anne B.

2016-01-01

Background Vigor may be an important phenotype of healthy aging. Factors that prevent frailty or conversely promote vigor are of interest. Using the Long Life Family Study (LLFS), we investigated the association with mortality and heritability of a rescaled Fried frailty index, the Scale of Aging Vigor in Epidemiology (SAVE), to determine its value for genetic analyses. Design/Setting Longitudinal, community-based cohort study of long lived individuals and their families (N=4075 genetically-related individuals) in the United States and Denmark. Methods The SAVE was measured in 3599 participants and included weight change, weakness (grip strength), fatigue (questionnaire), physical activity (days walked in prior 2 weeks), and slowness (gait speed), each component scored 0, 1 or 2 using approximate tertiles, and summed from 0 (vigorous) to 10 (frail). Heritability was determined with a variance-component based family analysis using a polygenic model. Association with mortality in the proband generation (N=1421) was calculated with Cox proportional hazards mixed effect models. Results Heritability of the SAVE was 0.23 (p = 1.72 × 10−13) overall (n=3599), 0.31 (p = 2.00 × 10−7) in probands (n=1479), and 0.26 (p = 2.00 × 10−6) in offspring (n=2120). In adjusted models, compared with lower SAVE scores (0–2), higher scores were associated with higher mortality (score 5–6 HR, 95%CI = 2.83, 1.46–5.51; score 7–10 HR, 95% CI = 3.40, 1.72–6.71). Conclusion The SAVE was associated with mortality and was moderately heritable in the LLFS, suggesting a genetic component to age-related vigor and frailty and supporting its use for further genetic analyses. PMID:27294813

Does extending daylight saving time save energy? Evidence from an Australian experiment

Energy Technology Data Exchange (ETDEWEB)

Kellogg, R. [California Univ., Berkeley, CA (United States). Dept. of Agricultural and Resource Economics; Wolff, H. [California Univ., Berkeley, CA (United States). Dept. of Agricultural and Resource Economics]|[Forschungsinstitut zur Zukunft der Arbeit (IZA), Bonn (Germany)

2007-03-15

Several countries are considering extending Daylight Saving Time (DST) in order to conserve energy, and the U.S. will extend DST by one month beginning in 2007. However, projections that these extensions will reduce electricity consumption rely on extrapolations and simulations rather than empirical evidence. This paper, in contrast, examines a quasiexperiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. Using detailed panel data and a triple differences specification, we show that the extension did not conserve electricity, and that a prominent simulation model overstates electricity savings when it is applied to Australia. (orig.)

Chapter 21: Estimating Net Savings - Common Practices. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Violette, Daniel M. [Navigant, Boulder, CO (United States); Rathbun, Pamela [Tetra Tech, Madison, WI (United States)

2017-11-02

This chapter focuses on the methods used to estimate net energy savings in evaluation, measurement, and verification (EM and V) studies for energy efficiency (EE) programs. The chapter provides a definition of net savings, which remains an unsettled topic both within the EE evaluation community and across the broader public policy evaluation community, particularly in the context of attribution of savings to a program. The chapter differs from the measure-specific Uniform Methods Project (UMP) chapters in both its approach and work product. Unlike other UMP resources that provide recommended protocols for determining gross energy savings, this chapter describes and compares the current industry practices for determining net energy savings but does not prescribe methods.

[Saving motives in young, middle-aged, and older adults. Preliminary results of a new inventory for exploring lifespan saving motives].

Science.gov (United States)

Rager, B; Lang, F R; Wagner, G G

2012-12-01

There is some research on personal reasons for saving money in the economic sciences. However, not much is known about the age differences of saving motives. In this vein, the future time perspective (FTP) is known to play a critical role for motivation across the life span. In this study, we introduce a new Saving Motive Inventory (SMI), which also covers saving goals after retirement. Furthermore, it is argued that additional saving motives that are not based on economic models of life-cycle saving also exist. In accordance with the socio-emotional selectivity theory, we explored age differences in an online survey with 496 participants from young (19-44 years), middle-aged (45-64 years), and older (65-86 years) adulthood, who completed a questionnaire on saving motives, personality, and future-related thinking (e.g., Future Time Perspective Scale, Life Orientation Test). Results of the explorative Factor Analysis (EFA) are consistent with the theoretical expectations. The factors are generativity, educational investment, consumption, indifference, and provision for death and dying. Together these five factors account for 67% of the variance. In general, the inventory is reliable and valid with respect to the expected internal and external criteria. It contributes to better understanding of saving motives over the lifespan, especially with respect to effects of the future time perspective.

Control Evaluation Information System Savings

Directory of Open Access Journals (Sweden)

Eddy Sutedjo

2011-05-01

Full Text Available The purpose of this research is to evaluate the control of information system savings in the banking and to identify the weaknesses and problem happened in those saving systems. Research method used are book studies by collecting data and information needed and field studies by interview, observation, questioner, and checklist using COBIT method as a standard to assess the information system control of the company. The expected result about the evaluation result that show in the problem happened and recommendation given as the evaluation report and to give a view about the control done by the company. Conclusion took from this research that this banking company has met standards although some weaknesses still exists in the system.Index Terms - Control Information System, Savings

Housing-related lifestyle and energy saving

DEFF Research Database (Denmark)

Thøgersen, John

2017-01-01

of relevant background characteristics. A multivariate GLM analysis reveals that when differences in housing-related lifestyles are controlled, neither country of residence nor the interaction between lifestyle and country of residence influence energy saving innovativeness or everyday energy-saving efforts...

Comparison of Software Models for Energy Savings from Cool Roofs

Energy Technology Data Exchange (ETDEWEB)

New, Joshua Ryan [ORNL; Miller, William A [ORNL; Huang, Yu (Joe) [White Box Technologies; Levinson, Ronnen [Lawrence Berkeley National Laboratory (LBNL)

2014-01-01

A web-based Roof Savings Calculator (RSC) has been deployed for the United States Department of Energy as an industry-consensus tool to help building owners, manufacturers, distributors, contractors and researchers easily run complex roof and attic simulations. This tool employs modern web technologies, usability design, and national average defaults as an interface to annual simulations of hour-by-hour, whole-building performance using the world-class simulation tools DOE-2.1E and AtticSim in order to provide estimated annual energy and cost savings. In addition to cool reflective roofs, RSC simulates multiple roof and attic configurations including different roof slopes, above sheathing ventilation, radiant barriers, low-emittance roof surfaces, duct location, duct leakage rates, multiple substrate types, and insulation levels. A base case and energy-efficient alternative can be compared side-by-side to estimate monthly energy. RSC was benchmarked against field data from demonstration homes in Ft. Irwin, California; while cooling savings were similar, heating penalty varied significantly across different simulation engines. RSC results reduce cool roofing cost-effectiveness thus mitigating expected economic incentives for this countermeasure to the urban heat island effect. This paper consolidates comparison of RSC s projected energy savings to other simulation engines including DOE-2.1E, AtticSim, Micropas, and EnergyPlus, and presents preliminary analyses. RSC s algorithms for capturing radiant heat transfer and duct interaction in the attic assembly are considered major contributing factors to increased cooling savings and heating penalties. Comparison to previous simulation-based studies, analysis on the force multiplier of RSC cooling savings and heating penalties, the role of radiative heat exchange in an attic assembly, and changes made for increased accuracy of the duct model are included.

Targeting utility customers to improve energy savings from conservation and efficiency programs

International Nuclear Information System (INIS)

Taylor, Nicholas W.; Jones, Pierce H.; Kipp, M. Jennison

2014-01-01

Highlights: • Improving DSM program impacts by targeting high energy users. • DSM energy savings potential hinges on pre-participation performance. • Targeting can benefit different utilities and energy efficiency programs. • Overall performance can be improved by up to 250% via targeting strategies. - Abstract: Electric utilities, government agencies, and private interests in the US have committed and continue to invest substantial resources – including billions of dollars of financial capital – in the pursuit of energy efficiency and conservation through demand-side management (DSM) programs. While most of these programs are deemed to be cost effective, and therefore in the public interest, opportunities exist to improve cost effectiveness by targeting programs to those customers with the greatest potential for energy savings. This article details an analysis of three DSM programs offered by three Florida municipal electric utilities to explore such opportunities. First, we estimate programs’ energy savings impacts; second, we measure and compare energy savings across subgroups of program participants as determined by their pre-intervention energy performance, and third, we explore potential changes in program impacts that might be realized by targeting specific customers for participation in the DSM programs. All three programs resulted in statistically significant average (per-participant) energy savings, yet average savings varied widely, with the customers who performed best (i.e., most efficient) before the intervention saving the least energy and those who performed worst (i.e., least efficient) before the intervention saving the most. Assessment of alternative program participation scenarios with varying levels of customer targeting suggests that program impacts could be increased by as much as 80% for a professional energy audit program, just over 100% for a high-efficiency heat pump upgrade program, and nearly 250% for an attic insulation

Ted (G.J.) Kloosterman: on intrauterine growth. The significance of prenatal care. Studies on birth weight, placental weight and placental index

NARCIS (Netherlands)

Bleker, O. P.; Buimer, M.; van der Post, J. A. M.; van der Veen, F.

2006-01-01

In the last century, there was a heated debate on whether fetal growth retardation is caused by a small placenta or whether a placenta is small because the baby is small. One of the active participants in this debate was Kloosterman who studied 80,000 birth weights, and 30,000 placental weights, in

Entrepreneurial Saving Practices and Reinvestment : Theory and Evidence

NARCIS (Netherlands)

Beck, T.H.L.; Pamuk, H.; Uras, R.B.

2014-01-01

We use a novel enterprise survey from Tanzania to gauge the relationship between saving instruments and entrepreneurial reinvestment. While most informal savings practices do not imply a lower likelihood of entrepreneurial reinvestment when compared with formal savings practices, we find a

How significant is the ‘significant other’? Associations between significant others’ health behaviors and attitudes and young adults’ health outcomes

Directory of Open Access Journals (Sweden)

Berge Jerica M

2012-04-01

Full Text Available Abstract Background Having a significant other has been shown to be protective against physical and psychological health conditions for adults. Less is known about the period of emerging young adulthood and associations between significant others’ weight and weight-related health behaviors (e.g. healthy dietary intake, the frequency of physical activity, weight status. This study examined the association between significant others’ health attitudes and behaviors regarding eating and physical activity and young adults’ weight status, dietary intake, and physical activity. Methods This study uses data from Project EAT-III, a population-based cohort study with emerging young adults from diverse ethnic and socioeconomic backgrounds (n = 1212. Logistic regression models examining cross-sectional associations, adjusted for sociodemographics and health behaviors five years earlier, were used to estimate predicted probabilities and calculate prevalence differences. Results Young adult women whose significant others had health promoting attitudes/behaviors were significantly less likely to be overweight/obese and were more likely to eat ≥ 5 fruits/vegetables per day and engage in ≥ 3.5 hours/week of physical activity, compared to women whose significant others did not have health promoting behaviors/attitudes. Young adult men whose significant other had health promoting behaviors/attitudes were more likely to engage in ≥ 3.5 hours/week of physical activity compared to men whose significant others did not have health promoting behaviors/attitudes. Conclusions Findings suggest the protective nature of the significant other with regard to weight-related health behaviors of young adults, particularly for young adult women. Obesity prevention efforts should consider the importance of including the significant other in intervention efforts with young adult women and potentially men.

The determinants of household energy-saving behavior: Survey and comparison in five major Asian cities

International Nuclear Information System (INIS)

Hori, Shiro; Kondo, Kayoko; Nogata, Daisuke; Ben, Han

2013-01-01

It is difficult to control household energy consumption through regulation. From a policy standpoint, it is particularly challenging to identify the factors that influence people’s actions. Moreover, whatever these factors are, they are unlikely to uniformly span multiple cities in the Asian region. In this paper, we conduct a survey of energy-saving behavior to clarify the differences among such factors across five major Asian cities. The results from these surveys in Dalian, Chongqing, Fukuoka, Bangkok, and Ho Chi Minh indicate that global warming consciousness, environmental behavior, and social interaction significantly affect energy-saving behavior. Income and age also had weak positive effects on energy-saving behaviors. Social interaction was strongly linked to energy-saving behaviors, particularly in the rural areas of Dalian and Chongqing. This result indicates that community-based activities impact energy-saving behaviors. - Highlights: ► We conduct a survey of energy saving behavior in household in major Asian cities. ► We identify the factors that influence people's actions. ► Global warming consciousness and social interaction affect people behavior. ► This indicates community-based activities impact energy-saving behaviors in Asia.

Energy saving certificates. Gear up for three years... and more

International Nuclear Information System (INIS)

Signoret, Stephane; Petitot, Pauline; Zebboudj, Idir; Kim, Caroline; Mary, Olivier; De Santis, Audrey

2015-01-01

As the third period of Energy Saving Certificates (EEC) enter their third period, a first article comments the evolutions of the principles and modalities of this arrangement under the influence of the directive on energy efficiency, and how the involved actors cope with these evolutions. The main differences with the previous period are presented. They concern energy providers and eligible bodies, the level of 'cumac' KWh (cumac stands for cumulated and actualised), controls and sanctions, eligible operations, and modalities. A second article describes how the arrangement has been simplified by means of a declarative system, and outlines that the control has been strengthened and may lead to heavy sanctions. The next articles comment the consequences for the building sector, notably for thermal insulation, the implications for communities (notably for the development of the use of LEDs for public lighting and for heat networks), for the transport sector (fuel dealers, good transport optimisation programs, fossil energy saving in logistic and mobility programs), and for the agriculture sector. Some key figures related to the second period (January 2011 - December 2014) are given: number of supplied cumac KWh, distribution of EECs among sectors, evolution of the weighted monthly average price of EECs

Estimating customer electricity savings from projects installed by the U.S. ESCO industry

Energy Technology Data Exchange (ETDEWEB)

Carvallo, Juan Pablo [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Larsen, Peter H. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Goldman, Charles A. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

2014-11-25

The U.S. energy service company (ESCO) industry has a well-established track record of delivering substantial energy and dollar savings in the public and institutional facilities sector, typically through the use of energy savings performance contracts (ESPC) (Larsen et al. 2012; Goldman et al. 2005; Hopper et al. 2005, Stuart et al. 2013). This ~$6.4 billion industry, which is expected to grow significantly over the next five years, may play an important role in achieving demand-side energy efficiency under local/state/federal environmental policy goals. To date, there has been little or no research in the public domain to estimate electricity savings for the entire U.S. ESCO industry. Estimating these savings levels is a foundational step in order to determine total avoided greenhouse gas (GHG) emissions from demand-side energy efficiency measures installed by U.S. ESCOs. We introduce a method to estimate the total amount of electricity saved by projects implemented by the U.S. ESCO industry using the Lawrence Berkeley National Laboratory (LBNL) /National Association of Energy Service Companies (NAESCO) database of projects and LBNL’s biennial industry survey. We report two metrics: incremental electricity savings and savings from ESCO projects that are active in a given year (e.g., 2012). Overall, we estimate that in 2012 active U.S. ESCO industry projects generated about 34 TWh of electricity savings—15 TWh of these electricity savings were for MUSH market customers who did not rely on utility customer-funded energy efficiency programs (see Figure 1). This analysis shows that almost two-thirds of 2012 electricity savings in municipal, local and state government facilities, universities/colleges, K-12 schools, and healthcare facilities (i.e., the so-called “MUSH” market) were not supported by a utility customer-funded energy efficiency program.

Multifocal Gastric Ulcers Caused by Diffuse Large B Cell Lymphoma in a Patient With Significant Weight Loss

Directory of Open Access Journals (Sweden)

Mark A. Gromski MD

2016-12-01

Full Text Available Primary gastrointestinal (GI lymphoma is a heterogeneous disease with varied clinical presentations. The stomach is the most common GI site and accounts for 70% to 75% of GI lymphomas. We present a patient with gastric diffuse large B cell lymphoma (DLBCL who presented with significant weight loss, early satiety, and multifocal ulcerated gastric lesions. Esophagoduodenoscopy should be performed in patients presenting with warning symptoms as in our case. Diagnosis is usually made by endoscopic biopsies. Multiple treatment modalities including surgery, radiotherapy, and chemotherapy have been used. Advancements in endoscopic and pathologic technology decrease turnaround time for diagnosis and treatment initiation, thus reducing the need for surgery. Health care providers should maintain a high level of suspicion and consider gastric DLBCL as part of the differential diagnosis, especially in those with warning symptoms such as weight loss and early satiety with abnormal endoscopic findings.

Community based social marketing for implementation of energy saving targets at local level

Directory of Open Access Journals (Sweden)

Dalia Streimikiene

2015-05-01

Full Text Available Energy saving and greenhouse gas (GHG emission reduction policies at local level need to be investigated and new tools for climate change mitigation are necessary seeking to achieve GHG emission targets in Lithuania. Most Lithuanian municipalities have signed Covenant of Mayors and have prepared local energy action plans. However, all these plans include just energy saving measures on supply side and renovation of buildings. Nevertheless, the significant energy savings and GHG emission reductions can be achieved through behavioural changes. The aim of the paper is to apply community based social marketing approach in assessment of achievable energy saving and GHG emission reduction targets set by local energy action plans. The paper presents the results of case study implemented in Kaunas region municipality. The case study was conducted by creating focus groups and applying two scenarios: baseline or doing nothing and climate change mitigation scenario including intervention measures. The results of case study revealed that the total energy consumption reduction target set in Sustainable energy development strategy of Kaunas region county - 11% - can be achieved by combining results of energy consumption reduction in both focus groups. The survey conducted after study finalization revealed that respondents were provided with a lot of additional knowledge during the study and achieved real money savings. The major barriers of energy savings in households are related with the lack of information on energy savings and GHG emission reduction.

Energy-saving and emission-abatement potential of Chinese coal-fired power enterprise: A non-parametric analysis

International Nuclear Information System (INIS)

Wei, Chu; Löschel, Andreas; Liu, Bing

2015-01-01

In the context of soaring demand for electricity, mitigating and controlling greenhouse gas emissions is a great challenge for China's power sector. Increasing attention has been placed on the evaluation of energy efficiency and CO 2 abatement potential in the power sector. However, studies at the micro-level are relatively rare due to serious data limitations. This study uses the 2004 and 2008 Census data of Zhejiang province to construct a non-parametric frontier in order to assess the abatement space of energy and associated CO 2 emission from China's coal-fired power enterprises. A Weighted Russell Directional Distance Function (WRDDF) is applied to construct an energy-saving potential index and a CO 2 emission-abatement potential index. Both indicators depict the inefficiency level in terms of energy utilization and CO 2 emissions of electric power plants. Our results show a substantial variation of energy-saving potential and CO 2 abatement potential among enterprises. We find that large power enterprises are less efficient in 2004, but become more efficient than smaller enterprises in 2008. State-owned enterprises (SOE) are not significantly different in 2008 from 2004, but perform better than their non-SOE counterparts in 2008. This change in performance for large enterprises and SOE might be driven by the “top-1000 Enterprise Energy Conservation Action” that was implemented in 2006. - Highlights: • Energy-saving potential and CO 2 abatement-potential for Chinese power enterprise are evaluated. • The potential to curb energy and emission shows great variation and dynamic changes. • Large enterprise is less efficient than small enterprise in 2004, but more efficient in 2008. • The state-owned enterprise performs better than non-state-owned enterprise in 2008

Multifocal Gastric Ulcers Caused by Diffuse Large B Cell Lymphoma in a Patient With Significant Weight Loss

OpenAIRE

Gromski, Mark A.; Peng, Jennifer L.; Zhou, Jiehao; Masuoka, Howard C.; Suvannasankha, Attaya; Liangpunsakul, Suthat

2016-01-01

Primary gastrointestinal (GI) lymphoma is a heterogeneous disease with varied clinical presentations. The stomach is the most common GI site and accounts for 70% to 75% of GI lymphomas. We present a patient with gastric diffuse large B cell lymphoma (DLBCL) who presented with significant weight loss, early satiety, and multifocal ulcerated gastric lesions. Esophagoduodenoscopy should be performed in patients presenting with warning symptoms as in our case. Diagnosis is usually made by endosco...

Will Renewable Energy Save Our Planet?

Science.gov (United States)

Bojić, Milorad

2010-06-01

This paper discusses some important fundamental issues behind application of renewable energy (RE) to evaluate its impact as a climate change mitigation technology. The discussed issues are the following: definition of renewable energy, concentration of RE by weight and volume, generation of electrical energy and its power at unit area, electrical energy demand per unit area, life time approach vs. layman approach, energy return time, energy return ratio, CO2 return time, energy mix for RES production and use, geographical distribution of RES use, huge scale of energy shift from RES to non-RES, increase in energy consumption, Thermodynamic equilibrium of earth, and probable solutions for energy future of our energy and environmental crisis of today. The future solution (that would enable to human civilization further welfare, and good living, but with lower release of CO2 in atmosphere) may not be only RES. This will rather be an energy mix that may contain nuclear energy, non-nuclear renewable energy, or fossil energy with CO2 sequestration, efficient energy technologies, energy saving, and energy consumption decrease.

Overview of contractual savings institutions

OpenAIRE

Vittas, Dimitri; Skully, Michael

1991-01-01

Contractual savings institutions include national provident funds, life insurance companies, private pension funds, and funded social pension insurance systems. They have long-term liabilities and stable cash flows and are therefore ideal providers of term finance, not only to government and industry, but also to municipal authorities and the housing sector. Except for Singapore, Malaysia, and a few other countries, most developing countries have small and insignificant contractual savings in...

China energy-water nexus: Assessing the water-saving synergy effects of energy-saving policies during the eleventh Five-year Plan

International Nuclear Information System (INIS)

Gu, Alun; Teng, Fei; Wang, Yu

2014-01-01

Highlights: • Energy and water limit China’s sustainable development. • Current energy policies fail to address water saving issues. • The energy-water coefficient is estimated for both direct use and indirect use. • Water saving effects associated with energy-saving policies is calculated. • Water-energy nexus should be enhanced in key industrial sectors. - Abstract: Energy and water have become major factors limiting sustainable development in China. Energy efficiency and optimization of water management are critical for the healthy growth of the Chinese economy. Current national energy policies fail to adequately address water use issues. Similarly, current water policies do not consider the impact of energy consumption and greenhouse gas emissions. Consequently, few studies have investigated the relationship between energy consumption and water use. The present study analyzes the energy-water nexus in Chinese industries using input–output tables. Coefficients that characterize the relationship between energy consumption and water are used to describe the supply-consumption relationship between the water supply and primary energy sectors. Next, we calculate the water-saving effects associated with the enforcement of energy-saving policies in selected industrial sectors during the eleventh Five-year Plan, from 2005 to 2010. These calculations address the ferrous metals, non-ferrous metals, petrochemical engineering, building materials, and electricity industries as well as key light industries. Our findings indicate that energy-saving efforts in these industries will result in savings in water consumption. This study suggests that a cooperative relationship between water and energy conservation efforts should be an important factor in creating policies that encourage simultaneous savings of both resources. Additionally, the study indicates that government should promote water- and energy-saving techniques in key industrial sectors to encourage

37 CFR 11.61 - Savings clause.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Savings clause. 11.61 Section... Disciplinary Proceedings; Jurisdiction, Sanctions, Investigations, and Proceedings § 11.61 Savings clause. (a... subsequent to such effective date, if such conduct would continue to justify suspension or exclusion under...

Foreign Direct Investment or External Debt and Domestic Saving: Which has Greater Impact on Growth

Directory of Open Access Journals (Sweden)

Horas Djulius

2018-02-01

Full Text Available The choice taken by developing countries in meeting the lack of development funds has a varying effect. This study clarifies the role of foreign direct investment (FDI compared to foreign loans and domestic savings in short- and long-term economic growth of Indonesia. Data were obtained from World Bank and Bank Indonesia and used in error correction model to explain the linkage between predictors and economic growth. We show that in the short run, the three explanatory variables significantly affect economic growth. In the long run, compared to FDI and foreign loans, domestic savings positively and significantly affect economic growth. This study emphasizes the importance of sustaining domestic savings to maintain the stability of economic fundamentals in the long term.DOI: 10.15408/etk.v17i1.7120

REMINDER Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

CERN Multimedia

HR Division

2001-01-01

As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2)Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the interest of all parties concerned. This automatic transfer procedure has a number of advantages for participants in the SLS scheme. First, staff members will no longer have to take any administrative steps. Secondly, the new proced...

48 CFR 48.104-3 - Sharing collateral savings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Sharing collateral savings... CONTRACT MANAGEMENT VALUE ENGINEERING Policies and Procedures 48.104-3 Sharing collateral savings. (a) The Government shares collateral savings with the contractor, unless the head of the contracting activity has...

48 CFR 2448.104-3 - Sharing collateral savings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Sharing collateral savings... DEVELOPMENT CONTRACT MANAGEMENT VALUE ENGINEERING 2448.104-3 Sharing collateral savings. (a) The authority of the HCA to determine that the cost of calculating and tracking collateral savings will exceed the...

Poor Families Striving to Save in Matched Children’s Savings Accounts: Findings from a Randomized Experimental Design in Uganda

Science.gov (United States)

Karimli, Leyla; Ssewamala, Fred M.; Neilands, Torsten B.

2014-01-01

This study examines participants’ savings in children’s savings accounts (CSAs) set up for AIDS-orphaned children ages 10–15 in Uganda. Using a cluster randomized experimental design, we examine the extent to which families participating in a CSA program report more savings than their counterparts not participating in the program, explore the extent to which families who participate in the CSA program report using formal financial institutions compared with families who do not have a CSA, and consider whether families participating in the CSA program bring new money into the CSA or whether they reshuffle existing household assets. We find that participating in a CSA increased families’ likelihood to report having saved money. However, our results show no intervention effect either on the amount of self-reported savings or on the likelihood of using formal financial institutions. Further research is needed to understand whether use of a CSA helps families generate new wealth. PMID:25525282

Comparison between clinical significance of height-adjusted and weight-adjusted appendicular skeletal muscle mass.

Science.gov (United States)

Furushima, Taishi; Miyachi, Motohiko; Iemitsu, Motoyuki; Murakami, Haruka; Kawano, Hiroshi; Gando, Yuko; Kawakami, Ryoko; Sanada, Kiyoshi

2017-02-13

This study aimed to compare relationships between height- or weight-adjusted appendicular skeletal muscle mass (ASM/Ht 2 or ASM/Wt) and risk factors for cardiometabolic diseases or osteoporosis in Japanese men and women. Subjects were healthy Japanese men (n = 583) and women (n = 1218). The study population included a young group (310 men and 357 women; age, 18-40 years) and a middle-aged and elderly group (273 men and 861 women; age, ≥41 years). ASM was measured by dual-energy X-ray absorptiometry. The reference values for class 1 and 2 sarcopenia in each sex were defined as values one and two standard deviations below the sex-specific means of the young group, respectively. The reference values for class 1 and 2 sarcopenia defined by ASM/Ht 2 were 7.77 and 6.89 kg/m 2 in men and 6.06 and 5.31 kg/m 2 in women, respectively. The reference values for ASM/Wt were 35.0 and 32.0% in men and 29.6 and 26.4% in women, respectively. In both men and women, ASM/Wt was negatively correlated with higher triglycerides (TG) and positively correlated with serum high-density lipoprotein cholesterol (HDL-C), but these associations were not found in height-adjusted ASM. In women, TG, systolic blood pressure, and diastolic blood pressure in sarcopenia defined by ASM/Wt were significantly higher than those in normal subjects, but these associations were not found in sarcopenia defined by ASM/Ht 2 . Whole-body and regional bone mineral density in sarcopenia defined by ASM/Ht 2 were significantly lower than those in normal subjects, but these associations were not found in sarcopenia defined by ASM/Wt. Weight-adjusted definition was able to identify cardiometabolic risk factors such as TG and HDL-C while height-adjusted definition could identify factors for osteoporosis.

Health belief model and reasoned action theory in predicting water saving behaviors in yazd, iran.

Science.gov (United States)

Morowatisharifabad, Mohammad Ali; Momayyezi, Mahdieh; Ghaneian, Mohammad Taghi

2012-01-01

People's behaviors and intentions about healthy behaviors depend on their beliefs, values, and knowledge about the issue. Various models of health education are used in deter¬mining predictors of different healthy behaviors but their efficacy in cultural behaviors, such as water saving behaviors, are not studied. The study was conducted to explain water saving beha¬viors in Yazd, Iran on the basis of Health Belief Model and Reasoned Action Theory. The cross-sectional study used random cluster sampling to recruit 200 heads of households to collect the data. The survey questionnaire was tested for its content validity and reliability. Analysis of data included descriptive statistics, simple correlation, hierarchical multiple regression. Simple correlations between water saving behaviors and Reasoned Action Theory and Health Belief Model constructs were statistically significant. Health Belief Model and Reasoned Action Theory constructs explained 20.80% and 8.40% of the variances in water saving beha-viors, respectively. Perceived barriers were the strongest Predictor. Additionally, there was a sta¬tistically positive correlation between water saving behaviors and intention. In designing interventions aimed at water waste prevention, barriers of water saving behaviors should be addressed first, followed by people's attitude towards water saving. Health Belief Model constructs, with the exception of perceived severity and benefits, is more powerful than is Reasoned Action Theory in predicting water saving behavior and may be used as a framework for educational interventions aimed at improving water saving behaviors.

Health Belief Model and Reasoned Action Theory in Predicting Water Saving Behaviors in Yazd, Iran

Directory of Open Access Journals (Sweden)

Mohammad Taghi Ghaneian

2012-12-01

Full Text Available Background: People's behaviors and intentions about healthy behaviors depend on their beliefs, values, and knowledge about the issue. Various models of health education are used in deter-mining predictors of different healthy behaviors but their efficacy in cultural behaviors, such as water saving behaviors, are not studied. The study was conducted to explain water saving beha-viors in Yazd, Iran on the basis of Health Belief Model and Reasoned Action Theory. Methods: The cross-sectional study used random cluster sampling to recruit 200 heads of households to collect the data. The survey questionnaire was tested for its content validity and reliability. Analysis of data included descriptive statistics, simple correlation, hierarchical multiple regression. Results: Simple correlations between water saving behaviors and Reasoned Action Theory and Health Belief Model constructs were statistically significant. Health Belief Model and Reasoned Action Theory constructs explained 20.80% and 8.40% of the variances in water saving beha-viors, respectively. Perceived barriers were the strongest Predictor. Additionally, there was a sta-tistically positive correlation between water saving behaviors and intention. Conclusion: In designing interventions aimed at water waste prevention, barriers of water saving behaviors should be addressed first, followed by people's attitude towards water saving. Health Belief Model constructs, with the exception of perceived severity and benefits, is more powerful than is Reasoned Action Theory in predicting water saving behavior and may be used as a framework for educational interventions aimed at improving water saving behaviors.

Impacts of Commercial Building Controls on Energy Savings and Peak Load Reduction

Energy Technology Data Exchange (ETDEWEB)

Fernandez, Nicholas E.P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xie, YuLong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-05-30

Commercial buildings in the United States use about 18 Quadrillion British thermal units (Quads) of primary energy annually . Studies have shown that as much as 30% of building energy consumption can be avoided by using more accurate sensing, using existing controls better, and deploying advanced controls; hence, the motivation for the work described in this report. Studies also have shown that 10% to 20% of the commercial building peak load can be temporarily managed/curtailed to provide grid services. Although many studies have indicated significant potential for reducing the energy consumption in commercial buildings, very few have documented the actual savings. The studies that did so only provided savings at the whole building level, which makes it difficult to assess the savings potential of each individual measure deployed.

Electric energy savings from new technologies. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.; Imhoff, K.L.; Fisher, Z.J.

1986-09-01

Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for 10 technologies were prepared. The total projected annual savings for the year 2000 for all 10 technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In the Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference projection, only 25% of the savings estimated here should be subtracted from the reference projection for analysis purposes.

Energy saving analysis and management modeling based on index decomposition analysis integrated energy saving potential method: Application to complex chemical processes

International Nuclear Information System (INIS)

Geng, Zhiqiang; Gao, Huachao; Wang, Yanqing; Han, Yongming; Zhu, Qunxiong

2017-01-01

Highlights: • The integrated framework that combines IDA with energy-saving potential method is proposed. • Energy saving analysis and management framework of complex chemical processes is obtained. • This proposed method is efficient in energy optimization and carbon emissions of complex chemical processes. - Abstract: Energy saving and management of complex chemical processes play a crucial role in the sustainable development procedure. In order to analyze the effect of the technology, management level, and production structure having on energy efficiency and energy saving potential, this paper proposed a novel integrated framework that combines index decomposition analysis (IDA) with energy saving potential method. The IDA method can obtain the level of energy activity, energy hierarchy and energy intensity effectively based on data-drive to reflect the impact of energy usage. The energy saving potential method can verify the correctness of the improvement direction proposed by the IDA method. Meanwhile, energy efficiency improvement, energy consumption reduction and energy savings can be visually discovered by the proposed framework. The demonstration analysis of ethylene production has verified the practicality of the proposed method. Moreover, we can obtain the corresponding improvement for the ethylene production based on the demonstration analysis. The energy efficiency index and the energy saving potential of these worst months can be increased by 6.7% and 7.4%, respectively. And the carbon emissions can be reduced by 7.4–8.2%.

12 CFR 583.12 - Multiple savings and loan holding company.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Multiple savings and loan holding company. 583... DEFINITIONS FOR REGULATIONS AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.12 Multiple savings and loan holding company. The term multiple savings and loan holding company means any savings and loan holding...

12 CFR 583.11 - Diversified savings and loan holding company.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Diversified savings and loan holding company... DEFINITIONS FOR REGULATIONS AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.11 Diversified savings and loan holding company. The term diversified savings and loan holding company means any savings and loan holding...

Revolving fund for energy saving

International Nuclear Information System (INIS)

Prebensen, K.

1993-01-01

A key issue in Eastern Europe is the adjustment of prices from the former COMECON level to a level conforming with free market conditions. In the case of household heating, this issue involves the removal of government subsidies leading to sharply increasing prices, metering of individual consumption, improving the efficiency of energy production, distribution and use - where savings of 30-50% in each link are technically feasible - thereby providing a potential for a adapting consumption patterns to higher energy prices, provided that funds are available. Currently, investment in commercial heat production and distribution systems have received substantial international support - whereas investment in reduction of demand has been little exploited. The Revolving Fund for Energy Savings in Polish Households is a concept for efficient financing of small-scale projects. It aims at financing, on the level of housing cooperatives, on the basis of a simplified lending and project evaluation procedure, well suited to current Polish conditions or an organizationally and financially weak banking system and little developed technical knowledge in the field of energy saving. A general introduction to the issue is given and technical problems are elaborated. The implementation of Energy Savings in Housing seen from the banking point of view, and a current pilot scheme for financing, are described. (AB)

Advances in Biological Water-saving Research: Challenge and Perspectives

Institute of Scientific and Technical Information of China (English)

Lun Shan; Xiping Deng; Suiqi Zhang

2006-01-01

Increasing the efficiency of water use by crops continues to escalate as a topic of concern because drought is a restrictive environmental factor for crop productivity worldwide. Greater yield per unit rainfall is one of the most important challenges in water-saving agriculture. Besides water-saving by irrigation engineering and conservation tillage, a good understanding of factors limiting and/or regulating yield now provides us with an opportunity to identify and then precisely select for physiological and breeding traits that increase the efficiency of water use and drought tolerance under water-limited conditions, biological water-saving is one means of achieving this goat. A definition of biological water-saving measures is proposed which embraces improvements in water-use efficiency (WUE) and drought tolerance, by genetic improvement and physiological regulation. The preponderance of biological water-saving measures is discussed and strategies identified for working within natural resource constraints. The technology and future perspectives of biological water saving could provide not only new water-saving techniques but also a scientific base for application of water-saving irrigation and conservation tillage.

Concepts. Environmental care through energy saving

Energy Technology Data Exchange (ETDEWEB)

Wagner, G.

1987-04-01

Energy saving is an important ingredient of a preventive energy policy. It helps to reduce pollutants which are one essential source of damage done to air, water and soil. But even the environmentally damaging side effects of energy production, storage and distribution can be cut down through energy saving.

Mozambican Aggregate Consumption and Domestic Saving ...

African Journals Online (AJOL)

It was an unprecedented decade for its break with the previous trend; but so far, the new trend does not correspond to a substantial change in growth strategy to ensure that foreign savings become complementary rather than a substitute for domestic savings. Keywords: consumption, economic growth strategy, domestic ...

Building Savings and Investments Culture among Nigerians | Imegi ...

African Journals Online (AJOL)

It is therefore necessary to build among Nigerians savings and investments culture. A review of extant literature revealed that people save and invest for several reasons among which are to enhance the standard of living, take advantage of rare business opportunities, and meet unforeseen circumstances. Savings can be ...

Water saving through international trade of agricultural products

NARCIS (Netherlands)

Chapagain, Ashok; Hoekstra, Arjen Ysbert; Savenije, H.H.G.

2006-01-01

Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water

The model of creation of energy-saving competence of students of high school

Directory of Open Access Journals (Sweden)

Zeer Evald

2016-01-01

Full Text Available This article considers the most important conditions for the creationof energy-saving competence of students – undergraduate training. The actualityof the problem is caused by low energy efficiency of industrial production, significantly reduces the competitiveness of the domestic economy and, consequently, the need to intensify activities on the rational use of energy resources. The definition of energy-saving expertise, marked its structural components (value-motivational, cognitive activity-reflexive. Stages of creationof energy-saving expertise in system of continuous vocational training: diagnosis, motivation, learning and reflective-evaluative. The possibilities of educational technology and psycho designed to work with the psychological barriers and resistance to the process of regulation of energy consumption, the production facilities at its energy efficiency and energy saving. In particular, it is recommended to use active learning methods (discussion, games, analysis of problem situations, etc., Information and communication technologies for the implementation of educational and research projects in the field of energy conservation, the development and implementation of interactive multimedia learning environments.

Return on investment: a fuller assessment of the benefits and cost savings of the US publicly funded family planning program.

Science.gov (United States)

Frost, Jennifer J; Sonfield, Adam; Zolna, Mia R; Finer, Lawrence B

2014-12-01

Policy Points: The US publicly supported family planning effort serves millions of women and men each year, and this analysis provides new estimates of its positive impact on a wide range of health outcomes and its net savings to the government. The public investment in family planning programs and providers not only helps women and couples avoid unintended pregnancy and abortion, but also helps many thousands avoid cervical cancer, HIV and other sexually transmitted infections, infertility, and preterm and low birth weight births. This investment resulted in net government savings of $13.6 billion in 2010, or $7.09 for every public dollar spent. Each year the United States' publicly supported family planning program serves millions of low-income women. Although the health impact and public-sector savings associated with this program's services extend well beyond preventing unintended pregnancy, they never have been fully quantified. Drawing on an array of survey data and published parameters, we estimated the direct national-level and state-level health benefits that accrued from providing contraceptives, tests for the human immunodeficiency virus (HIV) and other sexually transmitted infections (STIs), Pap tests and tests for human papillomavirus (HPV), and HPV vaccinations at publicly supported family planning settings in 2010. We estimated the public cost savings attributable to these services and compared those with the cost of publicly funded family planning services in 2010 to find the net public-sector savings. We adjusted our estimates of the cost savings for unplanned births to exclude some mistimed births that would remain publicly funded if they had occurred later and to include the medical costs for births through age 5 of the child. In 2010, care provided during publicly supported family planning visits averted an estimated 2.2 million unintended pregnancies, including 287,500 closely spaced and 164,190 preterm or low birth weight (LBW) births, 99

State Regulation of the Savings Market Within the Context of “New Economy” Imperatives

Directory of Open Access Journals (Sweden)

Valeriya Viktorovna Litvin

2015-12-01

Full Text Available In the conditions of “new economy” which today is being shaped due to unprecedented progress of science and technology, and information revolution, we observe significant intensification of insecurity and instability risks as well as scaling-up and devastating impact of the downturn. Financial security of many countries and stable functioning of the national savings schemes are under threat which makes impossible expanded reproduction and further social welfare growth. In addition, over the last decades the financial component of crises has gained its role, new financial technologies and assets have become the key reason for the downturn. In this regard, the study of new potential threats of savings market volatility as a savings system core acquires special relevance. Based on the analysis of the main imperfections of savings market under the conditions of new economy, this article defines and analyzes priority directions of the state activity targeted at ensuring sustainability of the national savings system. The author outlines the scope of legal regulation for the savings market, reveals the peculiarities of its monopolization in the conditions of globalization taking into account specifics of this process on the post-industrial stage of civilization development. Manifestations of external effects in savings market have been investigated as well as mechanisms of neutralizing the negative externalities and encouraging positive ones. Both implications of information incomplete character and internalities referring to it have been examined. The methods to increase market savings saturation with information have been considered. The role of state guarantees to ensure sustainability and stability of the national savings systems development has been shown. Performance criteria for institutions in charge to guarantee savings return have been defined. Directions of improving the state system of safeguards have been offered. Mechanism of

Energy performance and energy saving of life-support systems in ...

African Journals Online (AJOL)

The contemporary automation systems of buildings ensure the most efficient control automation for heating, ventilation, lighting, hot water supply systems. This leads to significant increase of operation efficiency and reduction of energy costs. The integrated energy saving processes and functions are optimized depending ...

Technical energy savings versus changes in human behaviour

DEFF Research Database (Denmark)

Nørgaard, Jørgen

1996-01-01

Energy savings seems to be the most environmentally benign element in an energy policy. The paper is a reflection on the work on saving energy both by improving technology and by adapting human daily behaviour. A simple model is suggested for the energy chain which converts the primary energy all...... the way into human satisfaction via energy services. Results of various analyses and field experiments show saving potentials for electricity of 50 - 80 per cents. Barriers for implementing these technical saving options are discussed. Also the necessity and potentials for changing behavioural or life...

Food industry hungry for energy savings

Energy Technology Data Exchange (ETDEWEB)

Blackburn, D

1989-04-01

The United Kingdom food and drink industry is a significant user of energy. Energy use figures are given showing the breakdown in terms of different sectors of the industry and also in terms of the fuel used. Four energy monitoring and target setting demonstration projects are outlined at factories typical of their type in different sectors. The projects have resulted in a much greater awareness by management in the factories involved of energy consumption and waste. Examples are given of improved energy efficiency and consequent energy savings which have resulted from this awareness. (U.K.).

A multifunctional energy-saving magnetic field generator

Science.gov (United States)

Xiong, Hui; Sun, Wanpeng; Liu, Jinzhen; Shi, Jinhua

2018-03-01

To improve the energy utilization of magnetic field generators for biological applications, a multifunctional energy-saving magnetic field generator (ESMFG) is presented. It is capable of producing both an alternating magnetic field (AMF) and a bipolar pulse magnetic field (BPMF) with high energy-saving and energy-reuse rates. Based on a theoretical analysis of an RLC second-order circuit, the energy-saving and energy-reuse rates of both types of magnetic fields can be calculated and are found to have acceptable values. The results of an experimental study using the proposed generator show that for the BPMF, the peak current reaches 130 A and the intensity reaches 70.3 mT. For the AMF, the intensity is 11.0 mT and the RMS current is 20 A. The energy-saving and energy-reuse rates for the AMF generator are 61.3% and 63.5%, respectively, while for the BPMF generator, the energy-saving rate is 33.6%. Thus, the proposed ESMFG has excellent potential for use in biomedical applications.

Causal Links among Saving, Investment and Growth and ...

African Journals Online (AJOL)

The relationship between saving, investment and GDP still remains an empirical issue. In their aspiration to catch up the rest of the world, developing countries provides a special place on this matter. This paper tried to investigate the main determinants of saving and the connection among saving, investment and GDP in the ...

Canada Education Savings Program: Annual Statistical Review--2009

Science.gov (United States)

Human Resources and Skills Development Canada, 2009

2009-01-01

The Canada Education Savings Program is an initiative of the Government of Canada. As part of the Department of Human Resources and Skills Development, the program administers the Canada Education Savings Grant and the Canada Learning Bond. These two initiatives help Canadian families save for a child's post-secondary education in Registered…

Max Tech Appliance Design: Potential for Maximizing U.S. Energy Savings through Standards

Energy Technology Data Exchange (ETDEWEB)

Garbesi, Karina; Desroches, Louis-Benoit; Bolduc, Christopher; Burch, Gabriel; Hosseinzadeh, Griffin; Saltiel, Seth

2011-05-06

This study surveyed the technical potential for efficiency improvements in 150 categories of appliances and equipment representing 33 quads of primary energy use across the US economy in 2010 and (1) documented efficient product designs, (2) identified the most promising cross-cutting strategies, and (3) ranked national energy savings potential by end use. Savings were estimated using a method modeled after US Department of Energy priority-setting reports - simplified versions of the full technical and economic analyses performed for rulemakings. This study demonstrates that large savings are possible by replacing products at the end-of-life with ultra-efficient models that use existing technology. Replacing the 50 top energy-saving end-uses (constituting 30 quads of primary energy consumption in 2010) with today's best-on-market equivalents would save {approx}200 quads of US primary energy over 30 years (25% of consumption anticipated there from). For the 29 products for maximum feasible savings potential could be estimated, the savings were twice as high. These results demonstrate that pushing ultra-efficient products to market could significantly escalate carbon emission reductions and is a viable strategy for sustaining large emissions reductions through standards. The results of this analysis were used by DOE for new coverage prioritization, to identify key opportunities for product prototyping and market development, and will leverage future standards rulemakings by identifying the full scope of maximum feasible technology options. High leverage products include advances lighting systems, HVAC, and televisions. High leverage technologies include electronic lighting, heat pumps, variable speed motors, and a host of controls-related technologies.

10 CFR 436.20 - Net savings.

Science.gov (United States)

2010-01-01

... ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.20 Net savings. For a retrofit project, net savings may be found by subtracting life cycle costs based on the proposed project from life cycle costs based on not having it. For a...

Creation of Carbon Credits by Water Saving

Directory of Open Access Journals (Sweden)

Yasutoshi Shimizu

2012-07-01

Full Text Available Until now, as a way of reducing greenhouse gas emissions from Japanese homes, the emphasis has been on reduction of energy consumption for air-conditioning and lighting. In recent years, there has been progress in CO₂ emission reduction through research into the water-saving performance of bathroom fixtures such as toilets and showers. Simulations have shown that CO₂ emissions associated with water consumption in Japanese homes can be reduced by 25% (1% of Japan’s total CO₂ emissions by 2020 through the adoption of the use of water-saving fixtures. In response to this finding, a program to promote the replacement of current fixtures with water-saving toilet bowls and thermally insulated bathtubs has been added to the Government of Japan’s energy-saving policy. Furthermore, CO₂ emission reduction through widespread use of water-saving fixtures has been adopted by the domestic credit system promoted by the Government of Japan as a way of achieving CO₂ emission-reduction targets; application of this credit system has also begun. As part of a bilateral offset credit mechanism promoted by the Government of Japan, research to evaluate the CO₂ reduction potential of the adoption of water-saving fixtures has been done in the city of Dalian, in China.

Save Energy Now Assessments Results 2008 Detailed Report

Energy Technology Data Exchange (ETDEWEB)

Wright, Anthony L [ORNL; Martin, Michaela A [ORNL; Nimbalkar, Sachin U [ORNL; Quinn, James [U.S. Department of Energy; Glatt, Ms. Sandy [DOE Industrial Technologies Program; Orthwein, Mr. Bill [U.S. Department of Energy

2010-09-01

In October 2005, U.S. Department of Energy Secretary Bodman launched his Easy Ways to Save Energy campaign with a promise to provide energy assessments to 200 of the largest U.S. manufacturing plants. DOE's Industrial Technologies Program (ITP) responded to the Secretary's campaign with its Save Energy Now initiative, featuring a new and highly cost-effective form of energy savings assessment. The approach for these assessments drew heavily on the existing resources of ITP's technology delivery component. Over the years, ITP Technology Delivery has worked with industry partners to assemble a suite of respected software tools, proven assessment protocols, training curricula, certified energy experts, and strong partnerships for deployment. The Save Energy Now assessments conducted in calendar year 2006 focused on natural gas savings and targeted many of the nation's largest manufacturing plants - those that consume at least 1 TBtu of energy annually. The 2006 Save Energy Now assessments focused primarily on assessments of steam and process heating systems, which account for an estimated 74% of all natural gas use by U.S. manufacturing plants. Because of the success of the Save Energy Now assessments conducted in 2006 and 2007, the program was expanded and enhanced in two major ways in 2008: (1) a new goal was set to perform at least 260 assessments; and (2) the assessment focus was expanded to include pumping, compressed air, and fan systems in addition to steam and process heating. DOE ITP also has developed software tools to assess energy efficiency improvement opportunities in pumping, compressed air, and fan systems. The Save Energy Now assessments integrate a strong training component designed to teach industrial plant personnel how to use DOE's opportunity assessment software tools. This approach has the advantages of promoting strong buy-in of plant personnel for the assessment and its outcomes and preparing them better to

ANALYSIS OF ENERGY SAVING AND ENERGY EFFICIENCY ISSUES DURING OPERATION OF THE METRO ROLLING STOCK

Directory of Open Access Journals (Sweden)

A. V. Donchenko

2016-06-01

Full Text Available Purpose.Nowadays a problem of significant power consumption of the rolling stock during its operation is a current issue. In connection with staged electricity rates increase further development of the rail electric transport, including metro rolling stock is impossible without a use of modern energy saving solutions and energy-efficient systems. To solve the specified problem it is necessary to carry out analysis of measures and determine prospective directions in energy saving and increase of energy efficiency on the metro rolling stock. Methodology. Using methods of scientific analysis, generalization, comparative analysis, forecasting and using results of experimental studies, the authors determined main ways for reduction of energy consumption during operation of the metro rolling stock. Energy cost analysis for metro rolling stock of the public utility (PU «Kiev Metro» was carried out. A great number of research works of native and foreign authors concerning the above mentioned problem were analyzed. Findings. Principal directions in energy saving and increase of energy efficiency of the metro rolling stock are implementation of recuperation systems, energy storage systems and energy-efficient control systems. It was determined that implementation of recuperation and energy storage systems helps to save a considerable amount of energy, consumed for traction, but it involves substantial investments. It is pointed out that in current complicated conditions of economic development of Ukraine, use of energy-efficient control systems is a perspective direction in energy saving. Main advantage of this direction is the economic effect obtaining without significant investments. Originality. For the first time was performed potential assessment for energy saving as a result of energy-efficient control systems use at type routine rolling stock operation modes on sections «Khreschatik –Teatralnaya – Khreschatik» and «Shulyavskaya �

Cost-saving production technologies and partial ownership

OpenAIRE

Juan Carlos Barcena-Ruiz; Norma Olaizola

2007-01-01

This work analyzes the incentives to acquire cost-saving production technologies when cross-participation exists at ownership level. We show that cross-participation reduces the incentives to adopt the cost-saving production technology.

Determining the Cost-Savings Threshold and Alignment Accuracy of Patient-Specific Instrumentation in Total Ankle Replacements.

Science.gov (United States)

Hamid, Kamran S; Matson, Andrew P; Nwachukwu, Benedict U; Scott, Daniel J; Mather, Richard C; DeOrio, James K

2017-01-01

Traditional intraoperative referencing for total ankle replacements (TARs) involves multiple steps and fluoroscopic guidance to determine mechanical alignment. Recent adoption of patient-specific instrumentation (PSI) allows for referencing to be determined preoperatively, resulting in less steps and potentially decreased operative time. We hypothesized that usage of PSI would result in decreased operating room time that would offset the additional cost of PSI compared with standard referencing (SR). In addition, we aimed to compare postoperative radiographic alignment between PSI and SR. Between August 2014 and September 2015, 87 patients undergoing TAR were enrolled in a prospectively collected TAR database. Patients were divided into cohorts based on PSI vs SR, and operative times were reviewed. Radiographic alignment parameters were retrospectively measured at 6 weeks postoperatively. Time-driven activity-based costing (TDABC) was used to derive direct costs. Cost vs operative time-savings were examined via 2-way sensitivity analysis to determine cost-saving thresholds for PSI applicable to a range of institution types. Cost-saving thresholds defined the price of PSI below which PSI would be cost-saving. A total of 35 PSI and 52 SR cases were evaluated with no significant differences identified in patient characteristics. Operative time from incision to completion of casting in cases without adjunct procedures was 127 minutes with PSI and 161 minutes with SR ( P cost-savings threshold range at our institution of $863 below which PSI pricing would provide net cost-savings. Two-way sensitivity analysis generated a globally applicable cost-savings threshold model based on institution-specific costs and surgeon-specific time-savings. This study demonstrated equivalent postoperative TAR alignment with PSI and SR referencing systems but with a significant decrease in operative time with PSI. Based on TDABC and associated sensitivity analysis, a cost-savings threshold

Canada Education Savings Program: Annual Statistical Review 2011

Science.gov (United States)

Human Resources and Skills Development Canada, 2011

2011-01-01

The Canada Education Savings Program has been an initiative of the Government of Canada since 1998. As part of the Department of Human Resources and Skills Development, the program administers the Canada Education Savings Grant and the Canada Learning Bond. These two initiatives help Canadian families save for a child's post-secondary education in…

Canada Education Savings Program: Annual Statistical Review 2012

Science.gov (United States)

Human Resources and Skills Development Canada, 2012

2012-01-01

The Canada Education Savings Program (CESP) has been an initiative of the Government of Canada since 1998. As part of the Department of Human Resources and Skills Development Canada, the program administers the Canada Education Savings Grant (CESG) and the Canada Learning Bond (CLB). These two initiatives help Canadian families save for a child's…

Automation of registration of sample weights for high-volume neutron activation analysis at the IBR-2 reactor of FLNP, JINR

International Nuclear Information System (INIS)

Dmitriev, A.Yu.; Dmitriev, F.A.

2015-01-01

The 'Weight' software tool was created at FLNP JINR to automate the reading of analytical balance readouts and saving these values in the NAA database. The analytical balance connected to the personal computer is used to measure weight values. The 'Weight' software tool controls the reading of weight values and the exchange of information with the NAA database. The weighing process of a large amount of samples is reliably provided during high-volume neutron activation analysis. [ru

Fatal alcohol-related traffic crashes increase subsequent to changes to and from daylight savings time.

Science.gov (United States)

Hicks, G J; Davis, J W; Hicks, R A

1998-06-01

On the hypothesis that sleepiness and alcohol interact to increase the risk of alcohol-related traffic fatalities, the percentages of alcohol-related fatal traffic crashes were assessed for the entire state of New Mexico for the years 1989-1992, for each of the seven days that preceded the changes to and from Daylight Savings Time and for each of the 14 days which followed the changes to and from Daylight Savings Time. Consistent with our hypothesis the percentage of alcohol-related fatal crashes increased significantly during the first seven days after these changes in Daylight Savings Time.

Energy saving baking methods. Energibesparende bagemetoder

Energy Technology Data Exchange (ETDEWEB)

Gry, P.

1988-01-01

The project ''Energy Saving Baking Methods'', run as part of the Energy Research Project-1984, and has as its aim to investigate potentials for energy saving by employing microwaves in the baking process. The project is a follow-up of the Nordic Industry Fund project which was completed in 1983. Smaller test ovens with IR long waves, warm air convection and microwaves of 2,47 GHz were used. Measurements of heat distribution from all three energy sources have been made. Extensive experiments have been carried out in order to develope baking methods for white loaves which are energy saving, but where the quality of the bread does not undergo any form of deterioration. Tests were made using microwaves alone, and in combination with hot air and IR. A resulting saving 35% baking time was achieved, and a further reduction of baking time can be reached where a greater improvement of energy distribution can take place, especially in the case of microwaves and IR. (AB).

Student saving, does it exist? : A study of students' saving behavior, attitude towards saving and motivation to save.

OpenAIRE

Tuvesson, Joakim; Yu, Shiyu

2011-01-01

Swedish households are getting deeper in debt and house prices keeps on rising. This is what happened in USA and it was one of the major causes of the recent financial crisis. To avoid a similar crisis in Sweden we think one part of the solution is to make sure that those who are students today and soon will get jobs, buy houses, take loans etcetera have necessary knowledge to do so. Students’ saving is an area that almost completely lacked researchers’ attention, and one goal with this thesi...

Impact of a standardized hand hygiene program on the incidence of nosocomial infection in very low birth weight infants.

Science.gov (United States)

Capretti, Maria Grazia; Sandri, Fabrizio; Tridapalli, Elisabetta; Galletti, Silvia; Petracci, Elisabetta; Faldella, Giacomo

2008-08-01

This study examined the effects of a standardized hand hygiene program on the rate of nosocomial infection (NI) in very low birth weight (VLBW) infants (birth weight hand hygiene program was implemented using antimicrobial soap (4% chlorhexidine gluconate) and alcohol-based hand rubs. NI after 72 hours of life was detected in 16 of the 85 VLBW infants in the first period and in 5 of the 80 VLBW infants in the second period. The rate of central venous catheter colonization was significantly lower in the second period (5.8%) than in the first period (16.6%). In our NICU, the incidence of NI in VLBW infants was significantly reduced after the introduction of a standardized handwashing protocol. In our experience, a proper hand hygiene program can save approximately 10 NI episodes/year, at a cost of $10,000 per episode. Therefore, improving hand hygiene practice is a cost-effective program in the NICU.

What actions in the domain of energy saving?

International Nuclear Information System (INIS)

Gourlia, J.P.; Richard, P.

2007-01-01

The energy saving potentialities are very often put forward to justify actions of mastery of energy demand. What are the possible substitutes and their result in terms of energy saving? What are the tools implemented and the services proposed by energy suppliers to end-users? What is the optimum mix between the regulatory measures and the market instruments to perform energy saving? What are the costs generated by such measures with respect to the expected results? How to sensibilize citizens to energy saving actions? These questions were debated during a round table which gathered 4 participants and two chairmen. (J.S.)

Flapping wing flight can save aerodynamic power compared to steady flight.

Science.gov (United States)

Pesavento, Umberto; Wang, Z Jane

2009-09-11

Flapping flight is more maneuverable than steady flight. It is debated whether this advantage is necessarily accompanied by a trade-off in the flight efficiency. Here we ask if any flapping motion exists that is aerodynamically more efficient than the optimal steady motion. We solve the Navier-Stokes equation governing the fluid dynamics around a 2D flapping wing, and determine the minimal aerodynamic power needed to support a specified weight. While most flapping wing motions are more costly than the optimal steady wing motion, we find that optimized flapping wing motions can save up to 27% of the aerodynamic power required by the optimal steady flight. We explain the cause of this energetic advantage.

Principles of valuing business travel time savings

OpenAIRE

Fowkes, A.S.

2001-01-01

OVERVIEW\\ud \\ud There are two approaches to valuing travel time savings to business people. The first is that which has formed the basis of UK policy for about 30 years, and which is set out in Section 2. This takes the value of travel time savings on employer’s business as equal to the gross wage rate plus an allowance for other costs that the employer saves. These might include such things as desk space, computer, tools, uniform, protective clothing, travel expenses. These were investigated...

Financial development and domestic savings in emerging Asian countries

OpenAIRE

Yılmaz BAYAR

2014-01-01

Saving is one of the important determinants of economic growth. Therefore determinants of saving are indirectly important for a sustainable economic growth. Financial sector has come into prominence as a possible determinant of saving in the globalized financial markets. This study examines the relationship between gross domestic savings and financial development in the emerging Asian countries during the period 1992-2011 by using panel regression. We found that financial de...

Electricity saving in households-A social cognitive approach

International Nuclear Information System (INIS)

Thogersen, John; Gronhoj, Alice

2010-01-01

We propose a conceptual framework for understanding the (lack of) energy saving efforts of private households based on Bandura's (1986) social cognitive theory. Results from applying this framework on a sample of Danish private electricity consumers are presented and it is concluded (a) that households' electricity consumption depends on both structural and motivational factors, (b) that their electricity saving effort depends on the strength of their internalized norms or self-expectations and on self-efficacy related factors, and (c) that there are predictable patterns of interaction among household members that influence their electricity consumption. The results suggest two approaches to promote electricity saving in households: (1) to change the socio-structural environment to be more facilitating for energy saving and empower householders to be more effective in their striving towards this goal through improved feedback about their household's electricity consumption and (2) social norms marketing, communicating social expectations and others' successful electricity saving achievements. - Research highlights: →A combination of survey and meter reading data is used to analyze energy saving in households. →Up to two adults from each household answered the questionnaire. →Dyadic data analysis is used to investigate interactions between household members. →Both structural and motivational factors account for households' electricity consumption. →Electricity saving efforts depends on internalized norms, self-efficacy and social interaction.

Electricity saving in households-A social cognitive approach

Energy Technology Data Exchange (ETDEWEB)

Thogersen, John, E-mail: jbt@asb.d [Aarhus University, School of Business and Social Sciences, Department of Marketing, Haslegaardsvej 10, DK-8210 Aarhus (Denmark); Gronhoj, Alice, E-mail: alg@asb.d [Aarhus University, School of Business and Social Sciences, Department of Marketing, Haslegaardsvej 10, DK-8210 Aarhus (Denmark)

2010-12-15

We propose a conceptual framework for understanding the (lack of) energy saving efforts of private households based on Bandura's (1986) social cognitive theory. Results from applying this framework on a sample of Danish private electricity consumers are presented and it is concluded (a) that households' electricity consumption depends on both structural and motivational factors, (b) that their electricity saving effort depends on the strength of their internalized norms or self-expectations and on self-efficacy related factors, and (c) that there are predictable patterns of interaction among household members that influence their electricity consumption. The results suggest two approaches to promote electricity saving in households: (1) to change the socio-structural environment to be more facilitating for energy saving and empower householders to be more effective in their striving towards this goal through improved feedback about their household's electricity consumption and (2) social norms marketing, communicating social expectations and others' successful electricity saving achievements. - Research highlights: {yields}A combination of survey and meter reading data is used to analyze energy saving in households. {yields}Up to two adults from each household answered the questionnaire. {yields}Dyadic data analysis is used to investigate interactions between household members. {yields}Both structural and motivational factors account for households' electricity consumption. {yields}Electricity saving efforts depends on internalized norms, self-efficacy and social interaction.

The rise of corporate savings

OpenAIRE

Roc Armenter

2012-01-01

Over the past few decades, several developed economies have experienced large changes in how much households and firms save. In fact, a sharp increase in firms’ savings behavior has changed the net position of the (nonfinancial) corporate sector vis-à-vis the rest of the economy. ; Why have firms in the business of producing goods or services become lenders? This is quite at odds with traditional models of corporate finance, which suggest that firms issue debt and equity to fund their operati...

Effects of a behaviour change intervention for Girl Scouts on child and parent energy-saving behaviours

Science.gov (United States)

Boudet, Hilary; Ardoin, Nicole M.; Flora, June; Armel, K. Carrie; Desai, Manisha; Robinson, Thomas N.

2016-08-01

Energy education programmes for children are hypothesized to have great potential to save energy. Such interventions are often assumed to impact child and family behaviours. Here, using a cluster-randomized controlled trial with 30 Girl Scout troops in Northern California, we assess the efficacy of two social cognitive theory-based interventions focused on residential and food-and-transportation energy-related behaviours of Girl Scouts and their families. We show that Girl Scouts and parents in troops randomly assigned to the residential energy intervention significantly increased their self-reported residential energy-saving behaviours immediately following the intervention and after more than seven months of follow-up, compared with controls. Girl Scouts in troops randomly assigned to the food-and-transportation energy intervention significantly increased their self-reported food-and-transportation energy-saving behaviours immediately following the intervention, compared with controls, but not at follow-up. The results demonstrate that theory-based, child-focused energy interventions have the potential to increase energy-saving behaviours among both children and their parents.

Energy Savings from Industrial Water Reductions

Energy Technology Data Exchange (ETDEWEB)

Rao, Prakash; McKane, Aimee; de Fontaine, Andre

2015-08-03

Although it is widely recognized that reducing freshwater consumption is of critical importance, generating interest in industrial water reduction programs can be hindered for a variety of reasons. These include the low cost of water, greater focus on water use in other sectors such as the agriculture and residential sectors, high levels of unbilled and/or unregulated self-supplied water use in industry, and lack of water metering and tracking capabilities at industrial facilities. However, there are many additional components to the resource savings associated with reducing site water use beyond the water savings alone, such as reductions in energy consumption, greenhouse gas emissions, treatment chemicals, and impact on the local watershed. Understanding and quantifying these additional resource savings can expand the community of businesses, NGOs, government agencies, and researchers with a vested interest in water reduction. This paper will develop a methodology for evaluating the embedded energy consumption associated with water use at an industrial facility. The methodology developed will use available data and references to evaluate the energy consumption associated with water supply and wastewater treatment outside of a facility’s fence line for various water sources. It will also include a framework for evaluating the energy consumption associated with water use within a facility’s fence line. The methodology will develop a more complete picture of the total resource savings associated with water reduction efforts and allow industrial water reduction programs to assess the energy and CO2 savings associated with their efforts.

12 CFR 362.11 - Activities of insured State savings associations.

Science.gov (United States)

2010-01-01

... money market preferred stock. (A) An insured state savings association's investment of up to 15 percent of the association's tier one capital in adjustable rate preferred stock or money market (auction... significant risk to the Deposit Insurance Fund. Such instruments shall be included in the 15 percent of tier...

The Effectiveness of Micro-credit Programmes Focusing on Household Income, Expenditure and Savings: Evidence From Bangladesh

Directory of Open Access Journals (Sweden)

Choudhury Haque Ariful

2017-06-01

Full Text Available This paper assesses the effectiveness of microfinance on household income, expenditure and savings. The survey examined those borrowers who had successfully completed at least three cycles of a loan. A household level survey (N=3000 was carried out to collect information about individuals receiving microcredit from one of the largest NGOs, ASA. The authors employed a multiple regression and discovered that the microcredit programme of ASA has a significant positive impact on household income, expenditures and savings. Moreover, the paper reveals that the level of education plays an important and statistically significant role in increasing the household income, expenditure and savings. Hence, the ASA microcredit programme has a positive impact on reducing poverty in Bangladesh and enhancing the competitiveness of deprived rural and urban households in improving their standard of living.

Societal objectives as drivers in the search for criteria weights when ranking energy efficiency measures

International Nuclear Information System (INIS)

Sousa, José L.; Martins, António G.; Jorge, Humberto M.

2012-01-01

In this paper we address a ranking problem from a tender mechanism established by the Portuguese energy regulator to promote energy efficiency measures in electricity consumption. Measures candidates to this tender are subjected to previously known assessment rules, and weighted criteria. Our proposal has explicitly taken avoided consumption and cost of saved kWh as decision variables for defining two societal objectives. In order to define ranges for the weights of the criteria and reference performance values, the search for the most suitable sets of weights is done by an evolutionary algorithm. Measures were used that applied for funding in previous tender calls. The results demonstrate that in face of different sets of measures, the range of weights for each criterion may vary significantly. The proposal, besides helping to obtain a more suitable set of criteria weights, can also assist in the very process of formulating the criteria, in view of the regulator’s societal objectives, since it was found that some of the used criteria actually lack the ability to discriminate between candidate measures. After a post-processing analysis, the DM is presented with a set of criteria weights from which he can select the one that better reflects his preferences. - Highlights: ► We address a Portuguese energy efficiency fostering tender mechanism. ► We used a genetic algorithm to search for sets of criteria weights. ► We used societal objectives to guide the selection of energy efficiency measures. ► Flexibility in the weights can help finding the best possible use of public money.

User behaviour impact on energy savings potential

DEFF Research Database (Denmark)

Rose, Jørgen

2014-01-01

and the residents' behaviour and if these defaults do not reflect actual circumstances, it can result in non-realisation of expected energy savings. Furthermore, a risk also exists that residents' behaviour change after the energy upgrading, e.g. to obtain improved comfort than what was possible before......, 3) Domestic hot water consumption and 4) Air change rate. Based on the analysis, a methodology is established that can be used to make more realistic and accurate predictions of expected energy savings associated with energy upgrading taking into account user behaviour....... the upgrading and this could lead to further discrepancies between the calculated and the actual energy savings. This paper presents an analysis on how residents’ behaviour and the use of standard assumptions may influence expected energy savings. The analysis is performed on two typical single-family houses...

Daylight saving time transitions and hospital treatments due to accidents or manic episodes

Directory of Open Access Journals (Sweden)

Lönnqvist Jouko

2008-02-01

Full Text Available Abstract Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment.

Daylight saving time transitions and hospital treatments due to accidents or manic episodes

Science.gov (United States)

Lahti, Tuuli A; Haukka, Jari; Lönnqvist, Jouko; Partonen, Timo

2008-01-01

Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment. PMID:18302734

Energy saving and consumption reducing evaluation of thermal power plant

Science.gov (United States)

Tan, Xiu; Han, Miaomiao

2018-03-01

At present, energy saving and consumption reduction require energy saving and consumption reduction measures for thermal power plant, establishing an evaluation system for energy conservation and consumption reduction is instructive for the whole energy saving work of thermal power plant. By analysing the existing evaluation system of energy conservation and consumption reduction, this paper points out that in addition to the technical indicators of power plant, market activities should also be introduced in the evaluation of energy saving and consumption reduction in power plant. Ttherefore, a new evaluation index of energy saving and consumption reduction is set up and the example power plant is calculated in this paper. Rresults show that after introducing the new evaluation index of energy saving and consumption reduction, the energy saving effect of the power plant can be judged more comprehensively, so as to better guide the work of energy saving and consumption reduction in power plant.

The modern water-saving agricultural technology: Progress and focus

African Journals Online (AJOL)

GREGORY

2010-09-13

Sep 13, 2010 ... DEVELOPING TENDENCY OF MODERN WATER-. SAVING AGRICULTURAL TECHNOLOGY. Excavation of the own water-saving potential using biotechnology. The biological water-saving technology that uses crop physiology control and modern breeding techniques to increase production and water ...

Measured energy savings from using night temperature setback

International Nuclear Information System (INIS)

Szydlowski, R.F.; Wrench, L.E.; O'Neill, P.J.

1993-01-01

The measured energy savings resulting from using night temperature setback in typical light-construction wooden office buildings was determined. Researchers installed monitoring equipment in a six-building sample of two-story wooden buildings at Fort Devens, Massachusetts. Data obtained during both single-setting and night-setback operating modes were used to develop models of each building's heat consumption as a function of the difference between inside and outside temperature. These models were used to estimate seasonal savings that could be obtained from the use of night-setback thermostat control. The measured savings in heating energy from using night temperature setback for the six Fort Devens buildings ranged from 14% to 25%; the mean savings was 19.2%. Based on an energy cost of $0.65/therm of natural gas, the estimated average cost savings of using automatic setback thermostats in these buildings is $780 per year per building

ESTIMATION OF YELLOWFIN TUNA PRODUCTION LANDED IN BENOA PORT WITH WEIGHT-WEIGHT, LENGTH-WEIGHT RELATIONSHIPS AND CONDITION FACTOR APPROACHES

Directory of Open Access Journals (Sweden)

Irwan Jatmiko

2017-01-01

Full Text Available Yellowfin tuna (Thunnus albacares is one of the important catch for the fishing industry in Indonesia. Length-weight relationship study is one of important tools to support fisheries management. However it could not be done to yellowfin tuna landed in Benoa port since they are in the form of gilled-gutted condition. The objectives of this study are to determine the relationship between gilled-gutted weight (GW and whole weight (WW, to calculate length weight relationship between fork length (FL and estimated whole weight (WW and to assess the relative condition factor (Kn of yellowfin tuna in Eastern Indian Ocean. Data were collected from three landing sites i.e. Malang, East Java; Benoa, Bali and Kupang, East Nusa Tenggara from January 2013 to February 2014. Linear regression analysis applied to test the significance baseline between weight-weight relationships and log transformed length weight relationship. Relative condition factor (Kn used to identify fish condition among length groups and months. The results showed a significant positive linear relationships between whole weight (WW and gilled-gutted weight (GW of T. albacares (p<0.001. There was a significant positive linier relationships between log transformed fork length and log transformed whole weight of T. albacares (p<0.001. Relative condition factor (Kn showed declining pattern along with length increase and varied among months. The findings from this study provide data for management of yellowfin tuna stock and population.

Diamond-set drill bits: savings achieved at Cominak

International Nuclear Information System (INIS)

Artru, P.; Bibert, F.X.; Croisat, G.

1988-01-01

Rotary instead of percussion adoption of drilling in the underground Akouta mine (Niger) has been the cause of important savings in blasting and bolting operations. Other savings affect capital expenditures and indirect savings are coming from better working conditions. For blast holes drilling and bolting, spare parts expenditures are 2.4 times lower with rotary drilling. Drilling rods are cheaper and last longer with rotary drilling. A rotary equipped Jumbos fleet is cheaper to maintain and is 18% more available, due to less mechanical and other breakdowns. Total savings for the mine owner and operator Cominak reach more than a billion of CFA francs [fr

Potential for the Use of Energy Savings Performance Contracts to Reduce Energy Consumption and Provide Energy and Cost Savings in Non-Building Applications

Energy Technology Data Exchange (ETDEWEB)

Williams, Charles; Green, Andrew S.; Dahle, Douglas; Barnett, John; Butler, Pat; Kerner, David

2013-08-01

The findings of this study indicate that potential exists in non-building applications to save energy and costs. This potential could save billions of federal dollars, reduce reliance on fossil fuels, increase energy independence and security, and reduce greenhouse gas emissions. The Federal Government has nearly twenty years of experience with achieving similar energy cost reductions, and letting the energy costs savings pay for themselves, by applying energy savings performance contracts (ESPC) inits buildings. Currently, the application of ESPCs is limited by statute to federal buildings. This study indicates that ESPCs can be a compatible and effective contracting tool for achieving savings in non-building applications.

Economic evaluation of water loss saving due to the biological ...

African Journals Online (AJOL)

This paper focuses on water loss saving as the benefit derived from biological control of this plant between 1990 and 2013 at New Year's Dam, Alicedale, Eastern Cape, South Africa. Estimates of water loss due to evapotranspiration from water hyacinth vary significantly; therefore, the study used three different rates, high, ...

Paternity leave in Sweden: costs, savings and health gains.

Science.gov (United States)

Månsdotter, Anna; Lindholm, Lars; Winkvist, Anna

2007-06-01

The initial objective is to examine the relationship between paternity leave in 1978-1979 and male mortality during 1981-2001, and the second objective is to calculate the cost-effectiveness of the 1974 parental insurance reform in Sweden. Based on a population of all Swedish couples who had their first child together in 1978 (45,801 males), the risk of death for men who took paternity leave, compared with men who did not, was estimated by odds ratios. The cost-effectiveness analysis considered costs for information, administration and production losses, minus savings due to decreased sickness leave and inpatient care, compared to health gains in life-years and quality-adjusted life-years (QALYs). It is demonstrated that fathers who took paternity leave have a statistically significant decreased death risk of 16%. Costs minus savings (discounted values) stretch from a net cost of EUR 19 million to a net saving of EUR 11 million, and the base case cost-effectiveness is EUR 8000 per QALY. The study indicates that that the right to paternity leave is a desirable reform based on commonly stated public health, economic, and feminist goals. The critical issue in future research should be to examine impact from health-related selection.

Evaluating the benefits of digital pathology implementation: Time savings in laboratory logistics.

Science.gov (United States)

Baidoshvili, Alexi; Bucur, Anca; van Leeuwen, Jasper; van der Laak, Jeroen; Kluin, Philip; van Diest, Paul J

2018-06-20

The benefits of digital pathology for workflow improvement and thereby cost savings in pathology, at least partly outweighing investment costs, are increasingly recognized. Successful implementations in a variety of scenarios start to demonstrate cost benefits of digital pathology for both research and routine diagnostics, contributing to a sound business case encouraging further adoption. To further support new adopters, there is still a need for detailed assessment of the impact this technology has on the relevant pathology workflows with emphasis on time saving. To assess the impact of digital pathology adoption on logistic laboratory tasks (i.e. not including pathologists' time for diagnosis making) in LabPON, a large regional pathology laboratory in The Netherlands. To quantify the benefits of digitization we analyzed the differences between the traditional analog and new digital workflows, carried out detailed measurements of all relevant steps in key analog and digital processes, and compared time spent. We modeled and assessed the logistic savings in five workflows: (1) Routine diagnosis, (2) Multi-disciplinary meeting, (3) External revision requests, (4) Extra stainings and (5) External consultation. On average over 19 working hours were saved on a typical day by working digitally, with the highest savings in routine diagnosis and multi-disciplinary meeting workflows. By working digitally, a significant amount of time could be saved in a large regional pathology lab with a typical case mix. We also present the data in each workflow per task and concrete logistic steps to allow extrapolation to the context and case mix of other laboratories. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Implementation of the Save and Restoration application for KOMAC operation

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae-Ha; Song, Young-Gi; Kwon, Hyeok-Jung; Cho, Yong-Sub [Korea Atomic Energy Research Institute, Gyeongju (Korea, Republic of)

2016-10-15

KOMAC has been operating a 100 MeV proton linear Accelerator. There are about 10,000 PVs for operating the 100 MeV proton linac. It is important to archive the operating parameters for operating beam lines and machine study. The parameters are reported manually and with screenshot. There not fixed reporting type so it is difficult to compare archived data. To improve and compensate the reporting system, a Save and Restoration application, which is based on JAVA has been implemented and connected with KOMAC Control system based on EPICS with JCA library. The operating data are saved in Save and Restoration Server in file type, and are restored to the required values using the saved files. This paper presents Implementation of the Save and Restoration application and its function. The group list is shown in restore page using reload button. The saved value of the PVs in group is shown as selecting a group which clients require and current values are appeared beside the restore value table to compare with saved data. The set restore button input the values in restore value table to each PV. The Save and Restore application save and restore the value of the PVs that clients require. The application is installed in client PC but data are archived in save and restore server in file format.

76 FR 20459 - Savings and Loan Holding Company Application

Science.gov (United States)

2011-04-12

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Savings and Loan Holding Company... concerning the following information collection. Title of Proposal: Savings and Loan Holding Company... officer of a savings and loan holding company, or any individual who owns, controls, or holds with power...

Energy Savings and Breakeven Costs for Residential Heat Pump Water Heaters in the United States

Energy Technology Data Exchange (ETDEWEB)

Maguire, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States); Burch, Jay [National Renewable Energy Lab. (NREL), Golden, CO (United States); Merrigan, Tim [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ong, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-07-01

Heat pump water heaters (HPWHs) have recently re-emerged in the U.S. residential water heating market and have the potential to provide homeowners with significant energy savings. However, there are questions as to the actual performance and energy savings potential of these units, in particular in regards to the heat pump's performance in unconditioned space and the impact of the heat pump on space heating and cooling loads when it is located in conditioned space. To help answer these questions, NREL performed simulations of a HPWH in both conditioned and unconditioned space at over 900 locations across the continental United States and Hawaii. Simulations included a Building America benchmark home so that any interaction between the HPWH and the home's HVAC equipment could be captured. Comparisons were performed to typical gas and electric water heaters to determine the energy savings potential and cost effectiveness of a HPWH relative to these technologies. HPWHs were found to have a significant source energy savings potential when replacing typical electric water heaters, but only saved source energy relative to gas water heater in the most favorable installation locations in the southern United States. When replacing an electric water heater, the HPWH is likely to break even in California, the southern United States, and parts of the northeast in most situations. However, the HPWH will only break even when replacing a gas water heater in a few southern states.

Energy Savings and Breakeven Cost for Residential Heat Pump Water Heaters in the United States

Energy Technology Data Exchange (ETDEWEB)

Maguire, J.; Burch, J.; Merrigan, T.; Ong, S.

2013-07-01

Heat pump water heaters (HPWHs) have recently reemerged in the U.S. residential water heating market and have the potential to provide homeowners with significant energy savings. However, there are questions as to the actual performance and energy savings potential of these units, in particular in regards to the heat pump's performance in unconditioned space and the impact of the heat pump on space heating and cooling loads when it is located in conditioned space. To help answer these questions, simulations were performed of a HPWH in both conditioned and unconditioned space at over 900 locations across the continental United States and Hawaii. Simulations included a Building America benchmark home so that any interaction between the HPWH and the home's HVAC equipment could be captured. Comparisons were performed to typical gas and electric water heaters to determine the energy savings potential and cost effectiveness of a HPWH relative to these technologies. HPWHs were found to have a significant source energy savings potential when replacing typical electric water heaters, but only saved source energy relative to gas water heater in the most favorable installation locations in the southern US. When replacing an electric water heater, the HPWH is likely to break even in California, the southern US, and parts of the northeast in most situations. However, the HPWH will only break even when replacing a gas water heater in a few southern states.

75 FR 27863 - Savings Bank of Maine, MHC and Savings Bank of Maine, Gardiner, Maine; Approval of Conversion...

Science.gov (United States)

2010-05-18

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-38: OTS Nos. 06947 and H 4709] Savings Bank of Maine, MHC and Savings Bank of Maine, Gardiner, Maine; Approval of Conversion Application Notice is hereby given that on May 7, 2010, the Office of Thrift Supervision approved the application of...

Electricity saving in households. A social cognitive approach

Energy Technology Data Exchange (ETDEWEB)

Thoegersen, John; Groenhoej, Alice [Aarhus University, School of Business and Social Sciences, Department of Marketing, Haslegaardsvej 10, DK-8210 Aarhus (Denmark)

2010-12-15

We propose a conceptual framework for understanding the (lack of) energy saving efforts of private households based on Bandura's (1986) social cognitive theory. Results from applying this framework on a sample of Danish private electricity consumers are presented and it is concluded (a) that households' electricity consumption depends on both structural and motivational factors, (b) that their electricity saving effort depends on the strength of their internalized norms or self-expectations and on self-efficacy related factors, and (c) that there are predictable patterns of interaction among household members that influence their electricity consumption. The results suggest two approaches to promote electricity saving in households: (1) to change the socio-structural environment to be more facilitating for energy saving and empower householders to be more effective in their striving towards this goal through improved feedback about their household's electricity consumption and (2) social norms marketing, communicating social expectations and others' successful electricity saving achievements. (author)

Potential energy savings and thermal comfort

DEFF Research Database (Denmark)

Jensen, Karsten Ingerslev; Rudbeck, Claus Christian; Schultz, Jørgen Munthe

1996-01-01

The simulation results on the energy saving potential and influence on indoor thermal comfort by replacement of common windows with aerogel windows as well as commercial low-energy windows are described and analysed.......The simulation results on the energy saving potential and influence on indoor thermal comfort by replacement of common windows with aerogel windows as well as commercial low-energy windows are described and analysed....

Improving the thermal integrity of new single-family detached residential buildings: Documentation for a regional database of capital costs and space conditioning load savings

International Nuclear Information System (INIS)

Koomey, J.G.; McMahon, J.E.; Wodley, C.

1991-07-01

This report summarizes the costs and space-conditioning load savings from improving new single-family building shells. It relies on survey data from the National Association of Home-builders (NAHB) to assess current insulation practices for these new buildings, and NAHB cost data (aggregated to the Federal region level) to estimate the costs of improving new single-family buildings beyond current practice. Space-conditioning load savings are estimated using a database of loads for prototype buildings developed at Lawrence Berkeley Laboratory, adjusted to reflect population-weighted average weather in each of the ten federal regions and for the nation as a whole

76 FR 35085 - Savings and Loan Holding Company Application

Science.gov (United States)

2011-06-15

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Savings and Loan Holding Company... Proposal: Savings Loan Holding Company Application. OMB Number: 1550-0015. Form Numbers: H-(e). Description... that no company, or any director or officer of a savings and loan holding company, or any individual...

The EU must triple its energy saving policy effect

NARCIS (Netherlands)

Wesselink, B.; Eichhammer, W.; Harmsen, R.

2010-01-01

The impact of EU energy savings policy must triple to achieve the bloc’s 2020 energy savings goal. But such efforts could get a much better foundation if European leaders set a binding energy consumption target, rather than the current indicative savings target. The evidence for such

Invisible costs, visible savings.

Science.gov (United States)

Lefever, G

1999-08-01

By identifying hidden inventory costs, nurse managers can save money for the organization. Some measures include tracking and standardizing supplies, accurately evaluating patients' needs, and making informed purchasing decisions.

The High Cost of Saving Energy Dollars.

Science.gov (United States)

Rose, Patricia

1985-01-01

In alternative financing a private company provides the capital and expertise for improving school energy efficiency. Savings are split between the school system and the company. Options for municipal leasing, cost sharing, and shared savings are explained along with financial, procedural, and legal considerations. (MLF)

HOUSEHOLD SAVINGS AS A SOURCE OF INVESTMENT RESOURCES IN UKRAINE

Directory of Open Access Journals (Sweden)

E. Nosova

2015-03-01

Full Text Available The approaches of scientists in definition of the household savings, the motives of their creation and the role they perform are identified; the role of household savings in the economy is described; the importance of household saving transformation from unorganized to organized forms is analyzed; the size of saving in financial and nonfinancial forms, its dynamics and structure are characterized; comparison between household savings and main macroeconomic indicators is conducted; ways of investment of households savings are discussed; the dynamics of deposits in banks and credit unions, the participation of households in collective investment schemes (private and corporate investment funds is characterized; the dynamics of household deposits in national and foreign currencies is shown; the dynamics of nominal value of investment fund’s securities, that have been placed among resident individuals are characterized; the dynamics of deposit accounts and the number of credit unions members are described; the comparative characteristics of different ways to invest money is given; the reasons of unorganized savings existence are marked; barriers to convert savings into investments and the ways of overcoming them are identified.

Who's in the business of saving lives?

Science.gov (United States)

Lee Chang, Pepe

2006-10-01

There are individuals, including children, dying needlessly in poverty-stricken third world countries. Many of these deaths could be prevented if pharmaceutical companies provided the drugs needed to save their lives. Some believe that because pharmaceutical companies have the power to save lives, and because they can do so with little effort, they have a special obligation. I argue that there is no distinction, with respect to obligations and responsibilities, between pharmaceutical companies and other types of companies. As a result, to hold pharmaceutical companies especially responsible for saving lives in third world countries is unjustified.

Must losing taxes on saving be harmful?

DEFF Research Database (Denmark)

Huizinga, Harry; Nielsen, Søren Bo

2004-01-01

on account of international tax evasion mayprevent the overall saving-investment tax wedge from becoming too high, and hencemay be beneficial for moderate preferences for public goods. A world with 'high-spending' governments, in contrast, is made worse off by the loss of saving taxes,and hence stands...... are financed by taxes on savingand investment. There is international cross-ownership of firms, and countries areassumed to be unable to tax away pure profits. Countries then face an incentiveto impose a rather high investment tax also borne by foreigners. In this setting,the loss of the saving tax instrument...

New Option in the Lives Saved Tool (LiST) Allows for the Conversion of Prevalence of Small-for-Gestational-Age and Preterm Births to Prevalence of Low Birth Weight.

Science.gov (United States)

Kozuki, Naoko; Katz, Joanne; Clermont, Adrienne; Walker, Neff

2017-11-01

Background: The Lives Saved Tool (LiST) is a software model that estimates the health impact of scaling up interventions on maternal and child health. One of the outputs of the model is an estimation of births by fetal size [appropriate-for-gestational-age (AGA) or small-for-gestational-age (SGA)] and by length of gestation (term or preterm), both of which influence birth weight. LiST uses prevalence estimates of births in these categories rather than of birth weight categories, because the causes and health consequences differ between SGA and preterm birth. The World Health Assembly nutrition plan, however, has set the prevalence of low birth weight (LBW) as a key indicator, with a specific goal of a 30% reduction in LBW prevalence by 2025. Objective: The objective of the study is to develop an algorithm that will allow LiST users to estimate changes in prevalence of LBW on the basis of changes in coverage of interventions and the resulting impact on prevalence estimates of SGA and preterm births. Methods: The study used 13 prospective cohort data sets from low- and middle-income countries (LMICs; 4 from sub-Saharan Africa, 5 from Asia, and 4 from Latin America), with reliable measures of gestational age and birth weight. By calculating the proportion of LBW births among SGA and preterm births in each data set and meta-analyzing those estimates, we calculated region-specific pooled rates of LBW among SGA and preterm births. Results: In Africa, 0.4% of term-AGA, 36.7% of term-SGA, 49.3% of preterm-AGA, and 100.0% of preterm-SGA births were LBW. In Asia, 1.0% of term-SGA, 47.0% of term-SGA, 36.7% of preterm-AGA, and 100.0% of preterm-SGA births were LBW. In Latin America, 0.4% of term-AGA, 34.4% of term-SGA, 32.3% of preterm-AGA, and 100.0% of preterm-SGA births were LBW. Conclusions: The simple conversion factor proposed here allows for the estimation of LBW within LiST for most LMICs. This will allow LiST users to approximate the impact of their health programs on

Saving lives and saving money: hospital-based violence intervention is cost-effective.

Science.gov (United States)

Juillard, Catherine; Smith, Randi; Anaya, Nancy; Garcia, Arturo; Kahn, James G; Dicker, Rochelle A

2015-02-01

Victims of violence are at significant risk for injury recidivism, including fatality. We previously demonstrated that our hospital-based violence intervention program (VIP) resulted in a fourfold reduction in injury recidivism, avoiding trauma care costs of $41,000 per injury. Given limited trauma center resources, assessing cost-effectiveness of interventions is fundamental to inform use of these programs in other institutions. This study examines the cost-effectiveness of hospital-based VIP. We used a decision tree and Markov disease state modeling to analyze cost utility for a hypothetical cohort of violently injured subjects, comparing VIP versus no VIP at a trauma center. Quality-adjusted life-years (QALYs) were calculated using differences in mortality and published health state utilities. Costs of trauma care and VIP were obtained from institutional data, and risk of recidivism with and without VIP were obtained from our trial. Outcomes were QALYs gained and net costs over a 5-year horizon. Sensitivity analyses examined the impact of uncertainty in input values on results. VIP results in an estimated 25.58 QALYs and net costs (program plus trauma care) of $5,892 per patient. Without VIP, these values are 25.34 and $5,923, respectively, suggesting that VIP yields substantial health benefits (24 QALYs) and savings ($4,100) if implemented for 100 individuals. In the sensitivity analysis, net QALYs gained with VIP nearly triple when the injury recidivism rate without VIP is highest. Cost-effectiveness remained robust over a range of values; $6,000 net cost savings occur when 5-year recidivism rate without VIP is at 7%. VIP costs less than having no VIP with significant gains in QALYs especially at anticipated program scale. Across a range of plausible values at which VIP would be less cost-effective (lower injury recidivism, cost of injury, and program effectiveness), VIP still results in acceptable cost per health outcome gained. VIP is effective and cost

Public-opinion poll on energy saving

International Nuclear Information System (INIS)

1982-01-01

A public-opinion poll was carried out on energy saving from November 26 to December 2, 1981, across the country. The number of persons participated in the survey was 5,000, whose age was 20 and above. The recovery ratio was 4,007 persons (80.1 %). The results of the survey and also the question-answer form are given with respective percentages. The questions were in the following three categories: (1) cognizance of energy saving - space-heating temperature, energy saving conscience use of private cars, purchase of highenergy consumption appliances; (2) energy for future - energy consumption, energy consumption trend, new types of energy, main sources of power generation, nuclear power in the overall electric power, apprehension toward nuclear power plants, safety measures in nuclear power plants; (3) governmental energy policy measures. (J.P.N.)

Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting

Energy Technology Data Exchange (ETDEWEB)

Mascarin, Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hannibal, Ted [Idaho National Lab. (INL), Idaho Falls, ID (United States); Raghunathan, Anand [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ivanic, Ziga [Idaho National Lab. (INL), Idaho Falls, ID (United States); Francfort, James [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-04-01

The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. The strategic targets were a 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. The baseline vehicle was an average of several available vehicles in this class. Mass and cost breakdowns from several sources were used, including original equipment manufacturers’ (OEMs’) input through U.S. Department of Energy’s Vehicle Technologies Office programs and public presentations, A2Mac1 LLC’s teardown information, Lotus Engineering Limited and FEV, Inc. breakdowns in their respective lightweighting studies, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses. Information on lightweighting strategies in this analysis came from these same sources and the ongoing U.S. Department of Energy-funded Vehma International of America, Inc. /Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, and many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs.

Renewable energy for Canada's northern communities - quantifying potential fuel savings

International Nuclear Information System (INIS)

Brothers, C.

1998-01-01

The probable impact of renewable energy technologies on fuel consumption in Canada's remote northern communities was discussed. These communities currently meet their electricity requirements using expensive diesel powered generators. It was noted that change to renewable energy in Canada's remote communities will only be made if the economic benefits can be clearly demonstrated. A study was conducted in Cambridge Bay, Northwest Territories, in which electrical load requirements and wind and solar resource data from the community was acquired to estimate savings in diesel fuel consumption for various renewable energy technologies. Wind was found to provide the most fuel displacement and was considered to be the most appropriate technology for these communities. A photovoltaic (PV) system of equivalent size would have significantly less impact on fuel savings in a community like Cambridge Bay, in part because a PV system would be poorly correlated on a seasonal basis with the energy requirements of the community. A wind-diesel system would be the most advantageous in terms of fuel savings due to its relatively high capacity factor, and due to the fact that is it is available year around. 4 refs., 1 tab., 4 figs

Effects of independently altering body weight and body mass on the metabolic cost of running

NARCIS (Netherlands)

Teunissen, L.P.J.; Grabowski, A.; Kram, R.

2011-01-01

The metabolic cost of running is substantial, despite the savings from elastic energy storage and return. Previous studies suggest that generating vertical force to support body weight and horizontal forces to brake and propel body mass are the major determinants of the metabolic cost of running. In

Recording and Audit of Resource Saving Innovations at Modern Industrial Companies

Directory of Open Access Journals (Sweden)

I. M.

2017-05-01

Full Text Available Resource saving and energy saving are essential components of “energy security” problem in all the countries, which raises the importance of analysis and revision of approaches to organization of recording and audit of resource saving innovations at industrial companies. The article’s objective is to study organization of recording and audit of resource saving technologies at industrial companies. A review of resource saving purposes and methods is given. For accounting purposes, innovations in resource saving are recorded now as intangible assets. Recording of resource saving innovations and technologies at industrial companies is confined to recording of transactions on creation or acquisition of patent rights objects and intellectual property objects. The author’s approach to organization of audit by the conformity of resource saving innovations with M. Porter’s test is proposed. Data showing success story of a Ukrainian company manufacturing polyurethane foam sealant PENADO in the aerosol dispenser is used to confirm that Ukraine does have potentials to introduce and utilize resource saving technologies, including energy saving ones. The proposed model for recording and audit of resource saving innovations should be used in strategic planning of resource saving innovations at the companies incorporated in industrial groups or holdings. Using this model, a company can reveal and assess the mismatch between amounts of resources that can be allocated in innovation and real capacities for introducing innovative resource saving technologies, and factors having the strongest impact on recourse saving innovations at companies incorporated in one financial and industrial group or holding. The proposed model accounts for the specific operative conditions in holdings and tough conditions for business operation of industrial companies in Ukraine.

Cross-Country Private Saving Heterogeneity and Culture

NARCIS (Netherlands)

de Castro Campos, M.; Kool, C.J.M.; Muysken, J.

2013-01-01

Motivated by the dominant role of cross-country heterogeneity in private saving in the creation of Eurozone imbalances over the past decade, we empirically investigate the determinants of private saving for a sample of 30 OECD countries over the period 1990-2010. In addition to standard

Rules of Thumb in Life-Cycle Saving Decisions

OpenAIRE

Winter, Joachim; Schlafmann, Kathrin; Rodepeter, Ralf

2011-01-01

We analyse life-cycle saving decisions when households use simple heuristics, or rules of thumb, rather than solve the underlying intertemporal optimization problem. We simulate life-cycle saving decisions using three simple rules and compute utility losses relative to the solution of the optimization problem. Our simulations suggest that utility losses induced by following simple decision rules are relatively low. Moreover, the two main saving motives re ected by the canonical life-cyc...

Liquidity in Retirement Savings Systems: An International Comparison

OpenAIRE

Beshears, John Leonard; Choi, James J.; Hurwitz, Joshua Bayard; Laibson, David I.; Madrian, Brigitte

2015-01-01

What is the socially optimal level of liquidity in a retirement savings system? Liquid retirement savings are desirable because liquidity enables agents to flexibly respond to pre-retirement events that raise the marginal utility of consumption. On the other hand, pre-retirement liquidity is undesirable when it leads to under-saving arising from, for example, planning mistakes or self-control problems. This paper compares the liquidity that six developed economies have built into their employ...

Evaluation of Wheat (Triticum aestivum, L. Seed Quality of Certified Seed and Farm-Saved Seed in Three Provinces of Iran

Directory of Open Access Journals (Sweden)

Khazaei Fardin

2016-06-01

Full Text Available The objective of this study was to study the seed quality aspects of wheat (Triticum aestivum L. and the extent of weed seed contamination present in wheat seeds produced in different regions of Iran. Four districts (cities, each including 12 fields (six certified seed fields and six farm-saved seed fields, were selected in each regions (provinces. One kilogram of the wheat seed sample was collected from each field for analysis in the laboratory. Wheat seeding was commonly done by farm-saved seed sourced from within the farm due to the high costs of certified seeds purchased from outside sources, followed by the low seed quality. The use of a farm-saved seed resulted in a higher germination rate and a lower mean time to germination compared with another system. The more positive temperatures experienced by mother plants could decrease the number of normal seedling and seedling length vigor index. Generally there was virtually no difference about physiological quality between certified seed and farm-saved seed sector that is related to lower quality of certified seed. The certified produced seeds had the lower number of weed seed, species and genus before and after cleaning. The highest seed purity and 1000 seed weight was obtained from the certified seed production system. The need for cleaning the farm-saved seed samples before sowing is one of the important findings of this survey.

Long-run savings and investment strategy optimization.

Science.gov (United States)

Gerrard, Russell; Guillén, Montserrat; Nielsen, Jens Perch; Pérez-Marín, Ana M

2014-01-01

We focus on automatic strategies to optimize life cycle savings and investment. Classical optimal savings theory establishes that, given the level of risk aversion, a saver would keep the same relative amount invested in risky assets at any given time. We show that, when optimizing lifecycle investment, performance and risk assessment have to take into account the investor's risk aversion and the maximum amount the investor could lose, simultaneously. When risk aversion and maximum possible loss are considered jointly, an optimal savings strategy is obtained, which follows from constant rather than relative absolute risk aversion. This result is fundamental to prove that if risk aversion and the maximum possible loss are both high, then holding a constant amount invested in the risky asset is optimal for a standard lifetime saving/pension process and outperforms some other simple strategies. Performance comparisons are based on downside risk-adjusted equivalence that is used in our illustration.

Long-Run Savings and Investment Strategy Optimization

Directory of Open Access Journals (Sweden)

Russell Gerrard

2014-01-01

Full Text Available We focus on automatic strategies to optimize life cycle savings and investment. Classical optimal savings theory establishes that, given the level of risk aversion, a saver would keep the same relative amount invested in risky assets at any given time. We show that, when optimizing lifecycle investment, performance and risk assessment have to take into account the investor’s risk aversion and the maximum amount the investor could lose, simultaneously. When risk aversion and maximum possible loss are considered jointly, an optimal savings strategy is obtained, which follows from constant rather than relative absolute risk aversion. This result is fundamental to prove that if risk aversion and the maximum possible loss are both high, then holding a constant amount invested in the risky asset is optimal for a standard lifetime saving/pension process and outperforms some other simple strategies. Performance comparisons are based on downside risk-adjusted equivalence that is used in our illustration.

Reported Energy and Cost Savings from the DOE ESPC Program: FY 2014

Energy Technology Data Exchange (ETDEWEB)

Slattery, Bob S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-03-01

The objective of this work was to determine the realization rate of energy and cost savings from the Department of Energy’s Energy Savings Performance Contract (ESPC) program based on information reported by the energy services companies (ESCOs) that are carrying out ESPC projects at federal sites. Information was extracted from 156 Measurement and Verification (M&V) reports to determine reported, estimated, and guaranteed cost savings and reported and estimated energy savings for the previous contract year. Because the quality of the reports varied, it was not possible to determine all of these parameters for each project. For all 156 projects, there was sufficient information to compare estimated, reported, and guaranteed cost savings. For this group, the total estimated cost savings for the reporting periods addressed were $210.6 million, total reported cost savings were $215.1 million, and total guaranteed cost savings were $204.5 million. This means that on average: ESPC contractors guaranteed 97% of the estimated cost savings; projects reported achieving 102% of the estimated cost savings; and projects reported achieving 105% of the guaranteed cost savings. For 155 of the projects examined, there was sufficient information to compare estimated and reported energy savings. On the basis of site energy, estimated savings for those projects for the previous year totaled 11.938 million MMBtu, and reported savings were 12.138 million MMBtu, 101.7% of the estimated energy savings. On the basis of source energy, total estimated energy savings for the 155 projects were 19.052 million MMBtu, and reported saving were 19.516 million MMBtu, 102.4% of the estimated energy savings.

Social and psychological barriers to private retirement savings in Hong Kong.

Science.gov (United States)

Chou, Kee-Lee; Yu, Kar-Ming; Chan, Wai-Sum; Chan, Alfred C M; Lum, Terry Y S; Zhu, Alex Y F

2014-01-01

Using a phone survey conducted among Hong Kong workers, we examined the association of institutional, social, and psychological factors with engagement in both private retirement savings and the total amount of savings. Alarmingly, this study demonstrates that approximately 42% of Hong Kong workers do not save privately for their retirement. We found that age, education, number of children, support from spouse and friends, social regulation, perceived financial knowledge, and financial management capacity are associated with engagement in private retirement savings. Among those who saved, age, education, perceived financial knowledge, and financial management capacity are related to the amount of savings. Measures that could increase the social support for retirement savings as well as enhance their financial knowledge and management ability should be developed and implemented so that more workers engage in private retirement savings. A promising policy option for the Hong Kong government is to offer a tax incentive to promote additional savings for old-age income protection.

Financial Literacy of Rural Population as a Determinant of Saving Behavior in Kazakhstan

Directory of Open Access Journals (Sweden)

Gaisina Sholpan

2017-11-01

Full Text Available In rural Kazakhstan, the credit and insurance services are limited and the state support is weak. Therefore, households’ saving is crucial to provide an insurance against the economic and social shocks. The main goal of this study is to contribute to the literature on financial literacy in emerging economies, namely, the effect of financial literacy on saving rates of rural population. Being well educated not always means to be financial literate and make efficient decisions regarding one’s own finance. People with a lower formal education level but with better experience in consuming financial products could be better prepared for making financial decisions including those related to savings. In this paper other socio-economic determinants of saving rates were taken into account, such as an income level, family size and an employment status. This research was carried out in Pavlodar region of Kazakhstan, and the data collection took place in spring 2014. In total, 405 households were surveyed. Results of the analysis show that if a respondent gives at least one correct answer, it positively affects the saving rates as well as one can observe that the higher the financial literacy level, the higher are the saving rates. Availability of state supported financial education programs for rural people will significantly contribute to the financial literacy improvement. At the same time, providing various and appropriate financial products in rural areas will motivate rural people to search for new knowledge and require authorities to intensify activities in this field.

Saving in Childhood and Adolescence: Insights from Developmental Psychology

Science.gov (United States)

Otto, Annette

2013-01-01

This paper addresses variables related to child and adolescent saving and explains the development of skills and behaviors that facilitate saving from an economic socialization perspective. References are made to the differences between the economic world of children, adolescents, and adults as well as to existing theories of saving. Children's…

Saving and Habit Formation : Evidence from Dutch Panel Data

NARCIS (Netherlands)

Alessie, R.J.M.; Teppa, F.

2002-01-01

This paper focuses on the role of habit formation in individual preferences over consumption and saving.We closely relate to Alessie and Lusardi's (1997) model as we estimate a model which is based on their closed-form solution, where saving is expressed as a function of lagged saving and other

Birth weight predicted baseline muscular efficiency, but not response of energy expenditure to calorie restriction: An empirical test of the predictive adaptive response hypothesis.

Science.gov (United States)

Workman, Megan; Baker, Jack; Lancaster, Jane B; Mermier, Christine; Alcock, Joe

2016-07-01

Aiming to test the evolutionary significance of relationships linking prenatal growth conditions to adult phenotypes, this study examined whether birth size predicts energetic savings during fasting. We specifically tested a Predictive Adaptive Response (PAR) model that predicts greater energetic saving among adults who were born small. Data were collected from a convenience sample of young adults living in Albuquerque, NM (n = 34). Indirect calorimetry quantified changes in resting energy expenditure (REE) and active muscular efficiency that occurred in response to a 29-h fast. Multiple regression analyses linked birth weight to baseline and postfast metabolic values while controlling for appropriate confounders (e.g., sex, body mass). Birth weight did not moderate the relationship between body size and energy expenditure, nor did it predict the magnitude change in REE or muscular efficiency observed from baseline to after fasting. Alternative indicators of birth size were also examined (e.g., low v. normal birth weight, comparison of tertiles), with no effects found. However, baseline muscular efficiency improved by 1.1% per 725 g (S.D.) increase in birth weight (P = 0.037). Birth size did not influence the sensitivity of metabolic demands to fasting-neither at rest nor during activity. Moreover, small birth size predicted a reduction in the efficiency with which muscles convert energy expended into work accomplished. These results do not support the ascription of adaptive function to phenotypes associated with small birth size. © 2015 Wiley Periodicals, Inc. Am. J. Hum. Biol. 28:484-492, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Risk transfer via energy savings insurance

OpenAIRE

Mills, Evan

2001-01-01

Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of t...

Valuing energy-saving measures in residential buildings. A choice experiment study

Energy Technology Data Exchange (ETDEWEB)

Kwak, So-Yoon; Kwak, Seung-Jun [Department of Economics, Korea University, 5-1 Anam-Dong, Seoul 136-701 (Korea); Yoo, Seung-Hoon [Department of International Area Studies, Hoseo University, 268 Anseo-Dong, Cheonan, Chungnam 330-713 (Korea)

2010-01-15

Air-conditioning and heating energy-saving measures can cut back the usage of energy. This paper attempts to apply a choice experiment in evaluating the consumer's willingness to pay (WTP) for air-conditioning and heating energy-saving measures in Korea's residential buildings. We consider the trade-offs between price and three attributes of energy-saving (window, facade, and ventilation) for selecting a preferred alternative and derive the marginal WTP (MWTP) estimate for each attribute. We also try to test irrelevant alternatives property for the estimation model holds and compare the estimation results of the multinomial logit (MNL) and the nested logit (NL) models. The NL model outperforms the MNL model. The NL model show that MWTPs for increasing the number of glasses and their variety, for increasing the thickness of facade for 1 mm, and for establishing a ventilation system are KRW 17,392 (USD 18.2), 1,112 (1.2), and 11,827 (12.4), respectively. Overall, the potential consumers have significant amount of WTP. (author)

Saving doses by outage planning strategy and architectural arrangements

International Nuclear Information System (INIS)

Wahlstroem, B.

1993-01-01

All radiation doses come out as a result of dose rate and exposure time, and the main part of the occupational exposure is caused during outages. While every reasonable attempt should be made to lower the dose rates, the other factor, the exposure time, may not be forgotten. The paper presents possible ways of saving man-hours in the controlled zone by outage planning strategy. And every saved man-hour means a saved radiation dose. At Loviisa NPS also some special architectural arrangements contribute to shortening the outage time, thus saving doses

Saving Energy. Managing School Facilities, Guide 3.

Science.gov (United States)

Department for Education and Employment, London (England). Architects and Building Branch.

This guide offers information on how schools can implement an energy saving action plan to reduce their energy costs. Various low-cost energy-saving measures are recommended covering heating levels and heating systems, electricity demand reduction and lighting, ventilation, hot water usage, and swimming pool energy management. Additional…

Gestational weight gain.

Science.gov (United States)

Kominiarek, Michelle A; Peaceman, Alan M

2017-12-01

Prenatal care providers are advised to evaluate maternal weight at each regularly scheduled prenatal visit, monitor progress toward meeting weight gain goals, and provide individualized counseling if significant deviations from a woman's goals occur. Today, nearly 50% of women exceed their weight gain goals with overweight and obese women having the highest prevalence of excessive weight gain. Risks of inadequate weight gain include low birthweight and failure to initiate breast-feeding whereas the risks of excessive weight gain include cesarean deliveries and postpartum weight retention for the mother and large-for-gestational-age infants, macrosomia, and childhood overweight or obesity for the offspring. Prenatal care providers have many resources and tools to incorporate weight and other health behavior counseling into routine prenatal practices. Because many women are motivated to improve health behaviors, pregnancy is often considered the optimal time to intervene for issues related to eating habits and physical activity to prevent excessive weight gain. Gestational weight gain is a potentially modifiable risk factor for a number of adverse maternal and neonatal outcomes and meta-analyses of randomized controlled trials report that diet or exercise interventions during pregnancy can help reduce excessive weight gain. However, health behavior interventions for gestational weight gain have not significantly improved other maternal and neonatal outcomes and have limited effectiveness in overweight and obese women. Copyright © 2017 Elsevier Inc. All rights reserved.

Estimating the energy saving potential of telecom operators in China

International Nuclear Information System (INIS)

Yang, Tian-Jian; Zhang, Yue-Jun; Huang, Jin; Peng, Ruo-Hong

2013-01-01

A set of models are employed to estimate the potential of total energy saved of productions and segmented energy saving for telecom operators in China. During the estimation, the total energy saving is divided into that by technology and management, which are derived from technical reform and progress, and management control measures and even marketing respectively, and the estimating methodologies for energy saving potential of each segment are elaborated. Empirical results from China Mobile indicate that, first, the technical advance in communications technology accounts for the largest proportion (70%–80%) of the total energy saved of productions in telecom sector of China. Second, technical reform brings about 20%–30% of the total energy saving. Third, the proportions of energy saving brought by marketing and control measures appear relatively smaller, just less than 3%. Therefore, China's telecom operators should seize the opportunity of the revolution of communications network techniques in recent years to create an advanced network with lower energy consumption

21 Cost-Saving Measures For The Judiciary

Directory of Open Access Journals (Sweden)

Jessica Vapnek

2013-02-01

Full Text Available Courts around the world are increasingly facing budget cuts and funding shortfalls. Budget problems are particularly acute in developing countries, where courts need to increase efficiency and access to justice while also managing resource limitations. International development agencies and donors expect measurable progress to justify continued funding of judicial reform projects. Yet, as rule of law efforts in developing countries improve public perception of courts and streamline court administration, more cases may be filed. Greater use of the courts puts greater strain on court resources, triggering the need to implement cost-saving measures while maintaining effective court administration.This paper outlines 21 measures that courts can implement to reduce costs. Specific examples from developing countries are presented wherever possible, with additional examples drawn from the United States and Europe. Although this paper is intended mainly for audiences in developing countries, the issues facing those courts are similar to issues addressed through court reforms in the United States over the past 50 years. For this reason, examples of cost-saving measures from developed countries such as the United States may be directly applicable or could be used as starting points to spur further cost savings innovation in the developing world.Section I of this paper explains the context for the implementation of judicial cost-saving measures, and raises some issues for reflection. Section II sets out specific judicial cost-saving measures, dividing them into three categories: measures that address court operations; measures directed at staffing and salaries; and measures that relate to court and case management. Section III discusses ways that countries and judiciaries can generate ideas for new and innovative cost-saving mechanisms.

Social Capital, Network Effects and Savings in Rural Vietnam

DEFF Research Database (Denmark)

Newman, Carol; Tarp, Finn; Van Den Broeck, Katleen

social networks in rural Vietnam can play a role in increasing formal savings where knowledge gaps exist. Networks are defined as active membership of women’s unions and the quality of networks is measured by the level of formal savings observed among group members. We find that membership of high...... quality networks leads to higher levels of saving in formal financial institutions and to higher levels of saving for productive investments as compared with other precautionary or lifecycle motives. Our results suggest that transmitting financial information through formal networks could be effective...... in increasing formal savings at grassroots level. We also conclude that ensuring information disseminated by networks is both accurate and desirable as well as important given that behavioural effects are also found in low-quality networks....

Saving and credit cooperatives in Mexico

Directory of Open Access Journals (Sweden)

Martha E. Izquierdo Muciño

2015-11-01

Full Text Available The Saving service and Credit Popular (Cajas de Ahorro y Credito Popular first appeared in Mexico in 1951 at the initiative of the priest Pedro Velazquez, similar to the popular savings banks that existed in Canada, which had been founded by Alphonse Desjardins in the early XX century.These savings service (Cajas de Ahorro were developing successfully in almost all Mexican communities, most of them remained faithful to the principles and ordinances of the church that gave rise to them, without the government participate in this activity and without policies encouraging or regulatory actions. It was not until 1991 when the General Law of Organizations and Auxiliary Credit Activities (Ley General de Organizaciones y Actividades was enacted. However in 2000 they began to emerge problems arising from fraudulent activities by some people taking advantage of loopholes established irregular saving services. Consequently and in order to solve these problems was changing the law. The last of the fraud occurred with the popular financial called FICREA (2015, to which was amended regulatory law again and while thus sought to avoid another fraud, who really was affected is a large amount very poor indigenous and peasants.Received: 03.06.2015Accepted: 17.07.2015

The creation of the SAVE consortium – Saving Asia's Vultures from ...

African Journals Online (AJOL)

This article describes the background to this problem, caused mainly by the veterinary drug diclofenac, and the establishment and structure of the SAVE consortium created to help coordinate the necessary conservation response. The lessons learnt in Asia and the working model of such a consortium are presented, which ...

Operational considerations in specifying legal weight vehicles for the highway transport of spent nuclear fuel

International Nuclear Information System (INIS)

Hill, C.V.; Rutenkroger, E.O.; Ratledge, J.E.

1990-01-01

This paper presents the results of a research project in which tractor manufacturers and carrier companies were interviewed to gather information on operational concerns in specifying a tractor to haul legal weight spent fuel casks. The system was assumed to operate very close to the 80,000 pound legal weight limit. Safety, performance, reliability, and maintainability of equipment were factors given particular attention. The interaction between driver fatigue, safety, and equipment was also discussed. Innovative operating strategies that could save weight were discussed. The paper concluded that operational considerations require that planners working with standard off-the-shelf tractor equipment should allow at least 17,350 pounds for the weight of the tractor as a starting point from which further weight reduction analysis can proceed. 4 refs., 3 figs

Insurance choice and tax-preferred health savings accounts.

Science.gov (United States)

Cardon, James H; Showalter, Mark H

2007-03-01

We develop an infinite horizon utility maximization model of the interaction between insurance choice and tax-preferred health savings accounts. The model can be used to examine a wide range of policy options, including flexible spending accounts, health savings accounts, and health reimbursement accounts. We also develop a 2-period model to simulate various implications of the model. Key results from the simulation analysis include the following: (1) with no adverse selection, use of unrestricted health savings accounts leads to modest welfare gains, after accounting for the tax revenue loss; (2) with adverse selection and an initial pooling equilibrium comprised of "sick" and "healthy" consumers, introducing HSAs can, but does not necessarily, lead to a new pooling equilibrium. The new equilibrium results in a higher coinsurance rate, an increase in expected utility for healthy consumers, and a decrease in expected utility for sick consumers; (3) with adverse selection and a separating equilibrium, both sick and healthy consumers are better off with a health savings account; (4) efficiency gains are possible when insurance contracts are explicitly linked to tax-preferred health savings accounts.

Weight simulation fuel assembly

International Nuclear Information System (INIS)

Sumikawa, Kiyokazu; Tokomatsu, Mutsuo.

1993-01-01

A tungsten pellet is not applied with hollow fabrication but a tungsten rod is inserted and filled into a zircaloy fuel cladding tube, as well as different kind of material having a density lower than that of tungsten, for example, stainless steel rods, are disposed successively intermittently and alternately for simulating the weight of one fuel rod. The filling method and the length of the individual pellets are optional depending on the method of usage, providing that the outer diameter of the simulation pellet is made identical with that of the actual fuel pellet. With such a constitution, there is no need to dispose a hollow portion as in the case of using only tungsten pellets, and the costs for both the materials and the fabrication can be saved. (T.M.)

Option pricing: a flexible tool to disseminate shared savings contracts.

Science.gov (United States)

Friedberg, Mark W; Buendia, Anthony M; Lauderdale, Katherine E; Hussey, Peter S

2013-08-01

Due to volatility in healthcare costs, shared savings contracts can create systematic financial losses for payers, especially when contracting with smaller providers. To improve the business case for shared savings, we calculated the prices of financial options that payers can "sell" to providers to offset these losses. Using 2009 to 2010 member-level total cost of care data from a large commercial health plan, we calculated option prices by applying a bootstrap simulation procedure. We repeated these simulations for providers of sizes ranging from 500 to 60,000 patients and for shared savings contracts with and without key design features (minimum savings thresholds,bonus caps, cost outlier truncation, and downside risk) and under assumptions of zero, 1%, and 2% real cost reductions due to the shared savings contracts. Assuming no real cost reduction and a 50% shared savings rate, per patient option prices ranged from $225 (3.1% of overall costs) for 500-patient providers to $23 (0.3%) for 60,000-patient providers. Introducing minimum savings thresholds, bonus caps, cost outlier truncation, and downside risk reduced these option prices. Option prices were highly sensitive to the magnitude of real cost reductions. If shared savings contracts cause 2% reductions in total costs, option prices fall to zero for all but the smallest providers. Calculating the prices of financial options that protect payers and providers from downside risk can inject flexibility into shared savings contracts, extend such contracts to smaller providers, and clarify the tradeoffs between different contract designs, potentially speeding the dissemination of shared savings.

Taxation and the household saving rate: evidence from OECD countries

Directory of Open Access Journals (Sweden)

Vito Tanzi

2000-03-01

Full Text Available This paper analyzes anew the relationship between taxation and the household saving rate. On the basis of standard savings and tax revenue data from a sample of OECD countries, it provides compelling empirical evidence of a powerful impact of taxes on household savings. In particular, income taxes are shown to affect negatively the household saving rate much more than consumption taxes.

Saving Face and Group Identity

DEFF Research Database (Denmark)

Eriksson, Tor; Mao, Lei; Villeval, Marie-Claire

2015-01-01

their self- but also other group members' image. This behavior is frequent even in the absence of group identity. When group identity is more salient, individuals help regardless of whether the least performer is an in-group or an out-group. This suggests that saving others' face is a strong social norm.......Are people willing to sacrifice resources to save one's and others' face? In a laboratory experiment, we study whether individuals forego resources to avoid the public exposure of the least performer in their group. We show that a majority of individuals are willing to pay to preserve not only...

Private savings and financial modernization in Mexico, 1988-95

Directory of Open Access Journals (Sweden)

Julio Lopez G.

2000-09-01

Full Text Available The evolution of private savings has attracted a lot of attention in the controversy about the origins of Mexico's 1995 crisis. In this paper the authors analyze the evolution of private savings in Mexico using the theory of effective demand as a framework and making use of econometric estimates. In this context, they analyze the impact of the financial reforms, and in particular the effect of liberalization and deregulation of the financial system on private savings in Mexico from 1980 to 1995. The authors formulate an explanation of the determinants of private savingsand the impact of the strategy of "financial modernization" on private savings, by specifying a model that allows to identify the influence of monetary and credit policies on savings. Then they carry out econometric estimates that lend empirical support to the main conclusions of the theoretical analysis. Their econometric work confirm notably that private savings has been low due to a series of changes in monetary policy that favored the contraction of private demand and led to greater foreign indebtedness.

Energy supply and energy saving in Ukraine

Directory of Open Access Journals (Sweden)

V.M. Ilchenko

2015-09-01

Full Text Available The article examines the main problems and solutions of energy saving and energy supply in Ukraine. Low energy efficiency has become one of the main factors of the crisis in the Ukrainian economy. The most relevant scientific and methodical approaches to assessment of the level of energy consumption and saving are indicated. The comparative analysis of annual energy use has been made. A potential to solve energy supply problems is strongly correlated with the ability to ensure the innovative development of economy for efficient and economical use of existing and imported energy resources. The ways for reducing of energy resource consumption have been suggested. Creation of technological conditions for the use of alternative energy sources is considered to be rational also. The development of renewable sources of energy (alternative and renewable energy sources will provide a significant effect in reducing the use of traditional energy sources, harmful emissions and greenhouse gas. Under these conditions, increasing of energy efficiency of economy and its competitiveness can be real. Improvement of environmental and social conditions of citizens of the country will mark a positive step towards the EU, and also will cancel some problems of the future generation.

Efficient energy-saving targets for APEC economies

International Nuclear Information System (INIS)

Hu, J.-L.; Kao, C.-H.

2007-01-01

Energy-saving target ratios (ESTR) for 17 APEC economies during 1991-2000 are computed in a total-factor framework. All nominal variables are transformed into real variables by the purchasing power parity (PPP) at the 1995 price level. The data envelopment analysis (DEA) approach is used to find the energy-saving target (EST) for APEC economies without reducing their maximum potential gross domestic productions (GDPs) in each year. Energy, labor, and capital are the three inputs, while GDP is the single output. Our major findings are as follows: (1) China has the largest EST up to almost half of its current usage. (2) Hong Kong, the Philippines, and the United States have the highest energy efficiency. (3) The energy efficiency generally increases for APEC economies except for Canada and New Zealand. (4) Chile, Mexico, and Taiwan have significantly improved their energy efficiency in the last 5 years. (5) An inverted U-shape relation exists between per capita EST and per capita GDP. (6) ESTR has a positive relation with the value-added percentage of GDP of the industry sector and a negative relation with that of the service sector

Saving water to save the environment: Contrasting the effectiveness of environmental and monetary appeals in a residential water saving intervention

NARCIS (Netherlands)

Tijs, M.S.; Karremans, J.C.T.M.; Veling, H.P.; Lange, M.A. de; Meegeren, P. van; Lion, R.

2017-01-01

To convince people to reduce their energy consumption, two types of persuasive appeals often are used by environmental organizations: Monetary appeals (i.e., 'conserving energy will save you money') and environmental appeals (i.e., 'conserving energy will protect the environment'). In this field

INFORMATION TECHNOLOGIES IN MANAGEMENT OF ENERGY SAVING PROJECTS

Directory of Open Access Journals (Sweden)

Дмитро Валерійович МАРГАСОВ

2015-06-01

Full Text Available The information technology structure is considered of energy saving projects. The project management diagram of energy saving projects is developed, using GIS, ICS, BIM and other control and visual systems.

Change in the Classroom Deportment of Children Following Change From Daylight Saving Time.

Science.gov (United States)

Hicks, Robert A.; And Others

1980-01-01

The deportment of each student in a third-grade classroom was rated by the teacher before and after the fall change from daylight savings time, to see if this disruption in circadian rhythms alters behavior. The deportment of boys improved significantly while the deportment of girls was significantly disrupted. (Author/SJL)

Lighting Energy Saving with Light Pipe in Farm Animal Production

Directory of Open Access Journals (Sweden)

Hans von Wachenfelt

2015-12-01

Full Text Available The Swedish animal production sector has potential for saving electric lighting of €4-9 million per year using efficient daylight utilisation. To demonstrate this, two light pipe systems, Velux® (house 1 and Solatube® (house 2, are installed in two identical pig houses to determine if the required light intensity, daylight autonomy (DA, and reduced electricity use for illumination can be achieved. In each house, three light sensors continuously measure the indoor daylight relative to an outdoor sensor. If the horizontal illuminance at pig height decreases below 40 lux between 08.00 and 16.00 hours, an automatic control system activates the lights, and electricity use is measured. The daylight factor (DF and DA are determined for each house, based on annual climate data. The mean annual DA of 48% and 55% is achieved for house 1 and house 2, respectively. Light pipes in house 2 have delivered significantly more DA than those in house 1. The most common illuminance range between 0 and 160 lux is recorded in both houses, corresponding to approximately 82% and 83% of daylight time for house 1 and house 2, respectively. Further, the daylighting system for house 2 has produced a uniform DF distribution between 0.05 and 0.59. The results demonstrate that considerable electric energy savings can be achieved in the animal production sector using light pipes. Saving 50% of electric lighting would correspond to 36 GWh or 2520 t CO2 per year for Sweden, but currently the energy savings are not making the investment profitable.

Realized Cost Savings 2016

Data.gov (United States)

Department of Veterans Affairs — This dataset is provided as a requirement of OMB’s Integrated Data Collection (IDC) and links to VA’s Realized Cost Savings and Avoidances data in JSON format. Cost...

Crushing leads to waste disposal savings for FUSRAP

Energy Technology Data Exchange (ETDEWEB)

Darby, J. [Department of Energy, Oak Ridge, TN (United States)

1997-02-01

In this article the author discusses the application of a rock crusher as a means of implementing cost savings in the remediation of FUSRAP sites. Transportation and offsite disposal costs are at present the biggest cost items in the remediation of FUSRAP sites. If these debris disposal problems can be handled in different manners, then remediation savings are available. Crushing can result in the ability to handle some wastes as soil disposal problems, which have different disposal regulations, thereby permitting cost savings.

Evaluating direct energy savings and market transformation effects: A decade of technical design assistance in the northwestern USA

International Nuclear Information System (INIS)

Van Den Wymelenberg, Kevin; Brown, G.Z.; Burpee, Heather; Djunaedy, Ery; Gladics, Gunnar; Kline, Jeff; Loveland, Joel; Meek, Christopher; Thimmanna, Harshana

2013-01-01

This paper documents the direct energy savings and energy efficiency market transformation impacts of a multi-state design assistance program in the northwestern US. The paper addresses four specific aims. (1) It provides a conservative and justified estimate of the direct energy savings associated with design assistance activities of a market transformation program from 2001 to 2010. (2) It provides a rigorous methodology to evaluate direct energy savings associated with design assistance market transformation programs. (3) It provides a low-cost replicable method to predict energy savings in new buildings by evaluating the integrated design process. (4) It provides quantitative indicators useful for estimating indirect energy savings from market transformation. Applying the recommended analysis method and assuming a 12-year measure life, the direct energy savings of the population (626 buildings; 51,262,000 ft 2 ) is estimated as 45.3 aMW (average megawatts) (electric), and 265,738.089 therms (non-electric). If the entire program budget were divided into the electric savings only, the Lab Network cost per kWh saved ranged from $0.0016 to $0.003 using the recommended method and $0.0092/kWh using the most conservative method. These figures do not isolate contextual influences or represent total resource cost. Statistically significant correlations (r 2 =0.1−0.3) between integrated design scores and energy savings are reported. - Highlights: ► Estimated direct energy savings of a market transformation program are presented. ► A methodology to evaluate energy savings from multiple baselines is documented. ► Level of integrated design can be used to estimate energy savings in new buildings. ► Quantitative evaluation indicators of efficiency market transformation are provided. ► Electric energy saved from design assistance costs between $0.0016 and $0.0092/kWh.

Measuring the effect of procrastination and environmental awareness on households' energy-saving behaviours: An empirical approach

Energy Technology Data Exchange (ETDEWEB)

Lillemo, Shuling Chen, E-mail: shulic@umb.no

2014-03-01

A common finding in behavioural economics is that people often procrastinate, i.e., keep postponing planned tasks or decisions that require effort to execute. The effect of procrastination on inter-temporal energy choice behaviours could be even more serious because energy is an abstract, invisible and intangible commodity. This paper uses a web survey to investigate how people's procrastination propensity and environmental awareness affect their heating-energy-saving behaviours. The results indicate that people who state that they have a higher tendency to procrastinate are significantly less likely to have engaged in most of the heating energy-saving activities, especially regarding larger purchases or investments in equipment and the insulation of doors and windows. I also found a positive relationship between environmental awareness and engaging in everyday energy-saving activities such as reducing the indoor temperature. The findings suggest that measures aimed at reducing procrastination are needed to realise energy-saving potential. It is important to find ways to either bring future benefits closer to the present or to magnify the costs of delayed action. For example, one can employ certain feedback systems and commitment devices to make current gains and future costs more visible or tangible. - Highlights: • Norwegian online survey on factors affecting households' heating energy saving activities. • Identify the effect of procrastination and environmental awareness in energy saving decision making. • People with a higher tendency to procrastinate are less likely to engage in energy saving activities. • Procrastination can limit the positive effect of environmental awareness on energy saving. • Innovative behavioural measures are suggested to bring people's “energy saving plans or decisions” to action.

Public administration electricity savings. Offentlige energibesparelser; Nyere danske erfaringer

Energy Technology Data Exchange (ETDEWEB)

Gjelstrup, G

1991-01-01

Analysis on how different types of public authorities experienced carrying out electricity savings showed that the individual public authority's internal political-administrative organizational form is of major importance for the possibilities of realizing potential electricity savings. In addition, it can be concluded that only certain public authorities have utilized external assistance in connection with effecting electricity savings. In these cases there has been some accordance between the particular authority's internal, political-administrative, organization and the organizational form presupposed in the external assistance offered. In spite of this, the public authorities in question have, in general, not progressed very far with electricity savings. Part of the reason for this lies namely in the fact that the special importance the mode of organization has for electricity savings, has been overlooked in this type of assistance. (CLS) 43 refs.

Public administration electricity savings. Offentlige energibesparelser; Nyere danske erfaringer

Energy Technology Data Exchange (ETDEWEB)

Gjelstrup, G.

1991-01-01

Analysis on how different types of public authorities experienced carrying out electricity savings showed that the individual public authority's internal political-administrative organizational form is of major importance for the possibilities of realizing potential electricity savings. In addition, it can be concluded that only certain public authorities have utilized external assistance in connection with effecting electricity savings. In these cases there has been some accordance between the particular authority's internal, political-administrative, organization and the organizational form presupposed in the external assistance offered. In spite of this, the public authorities in question have, in general, not progressed very far with electricity savings. Part of the reason for this lies namely in the fact that the special importance the mode of organization has for electricity savings, has been overlooked in this type of assistance. (CLS) 43 refs.

Consumption, Saving, Investment, and Unemployment. SVAR Tests of the Effects of Changes in the Consumption-Saving Pattern

OpenAIRE

Roberto Bande Ramudo; Manuel Fernández Grela; Mª Dolores Riveiro García

2011-01-01

In this paper we aim to provide information about the transmission mechanism at work between investment and unemployment by looking at the consumption-saving pattern as a determinant of investment behaviour. Our starting hypothesis is that permanent shifts in the consumption-saving pattern will have permanent effects on investment, with subsequent consequences for the unemployment rate. To test this hypothesis we build an SVAR model for the Spanish economy seeking information about the respon...

More than 30 per cent energy savings possible with LEDs in gerbera : substantial energy savings and little loss in production

NARCIS (Netherlands)

Helm, van der F.P.M.

2015-01-01

By installing LED-lighting and limiting it to 80 instead of 100 μmol gerbera growers can save 30 per cent on energy without any great loss in production, according to research. Light integration and interlighting don’t yet deliver any savings.

Recording and Audit of Resource Saving Innovations at Modern Industrial Companies

OpenAIRE

I. M.

2017-01-01

Resource saving and energy saving are essential components of “energy security” problem in all the countries, which raises the importance of analysis and revision of approaches to organization of recording and audit of resource saving innovations at industrial companies. The article’s objective is to study organization of recording and audit of resource saving technologies at industrial companies. A review of resource saving purposes and methods is given. For accounting purposes, innovati...

The HIV Anticaptory Saving Motive : An Empirical Analysis in South Africa

NARCIS (Netherlands)

Lammers, J.; van de Kuilen, G.

2007-01-01

This paper studies the effect of the HIV/AIDS epidemic on saving behaviour. Two important characteristics of HIV result in opposing forces on savings: mortality increases, which reduces savings, and long-term illness risk increases, which enhances savings. We use a two period life-cycle model with

Non-declarative sequence learning does not show savings in relearning.

Science.gov (United States)

Keisler, Aysha; Willingham, Daniel T

2007-04-01

Researchers have utilized the savings in relearning paradigm in a variety of settings since Ebbinghaus developed the tool over a century ago. In spite of its widespread use, we do not yet understand what type(s) of memory are measurable by savings. Specifically, can savings measure both declarative and non-declarative memories? The lack of conscious recollection of the encoded material in some studies indicates that non-declarative memories may show savings effects, but as all studies to date have used declarative tasks, we cannot be certain. Here, we administer a non-declarative task and then measure savings in relearning the material declaratively. Our results show that while material outside of awareness may show savings effects, non-declarative sequence memory does not. These data highlight the important distinction between memory without awareness and non-declarative memory.

Exploring the range of energy savings likely from energy efficiency retrofit measures in Ireland's residential sector

International Nuclear Information System (INIS)

Dineen, D.; Ó Gallachóir, B.P.

2017-01-01

This paper estimates the potential energy savings in the Irish residential sector by 2020 due to the introduction of an ambitious retrofit programme. We estimate the technical energy savings potential of retrofit measures targeting energy efficiency of the space and water heating end uses of the 2011 stock of residential dwellings between 2012 and 2020. We build eight separate scenarios, varying the number of dwellings retrofitted and the depth of retrofit carried out in order to investigate the range of energy savings possible. In 2020 the estimated technical savings potential lies in the range from 1713 GWh to 10,817 GWh, but is more likely to fall within the lower end of this range, i.e. between 1700 and 4360 GWh. When rebound effects are taken into account this reduces further to 1100 GWh and 2800 GWh per annum. The purpose of this paper was to test the robustness of the NEEAP target savings for residential retrofit, i.e. 3000 GWh by 2020. We conclude that this target is technically feasible but very challenging and unlikely to be achieved based on progress to date. It will require a significant shift towards deeper retrofit measures compared to what has been achieved by previous schemes. - Highlights: • Paper estimates range of energy savings likely from Irish residential retrofit. • Achieving NEEAP target savings of 3000 GWh by 2020 is feasible but very challenging. • Likely savings of 1100–2800 GWh per annum in 2020, including rebound. • NEEAP target unlikely to be achieved based on current trends.

Evaluation of usage and fuel savings of solar ovens in Nicaragua

International Nuclear Information System (INIS)

Bauer, Gordon

2016-01-01

Solar cooking technology has been promoted as a solution to both global poverty and environmental degradation, but relatively little research exists on the impact of solar oven usage on biomass fuel consumption. This study evaluates solar oven usage and wood consumption in northern Nicaragua during both the rainy and dry seasons, using surveys, temperature dataloggers, and direct measurements of fuelwood use. Solar oven owners reported usage on 79% of days during the dry season, and 41% of days during the rainy season. Comparison with oven temperature records confirmed usage on 50% of days during the dry season, and 16% of days during the rainy season. However, wood consumption measurements showed no statistically significant difference between days with solar oven usage and days without, suggesting that frequency of usage alone is not an appropriate proxy for fuel savings. Survey results suggest that a large part of solar oven usage came in addition to biomass cooking, as opposed to replacing it. These results suggest a need for further study of wood consumption in situ and more focus on the specific kinds of foods prepared in solar cookers, as well as local cultural and climatic conditions. - Highlights: • Solar oven usage reported on most days during dry season. • No statistically significant fuelwood savings can be attributed to solar oven use. • Usage reported on surveys differs substantially from solar oven temperature data. • Possible causes of lack of wood savings range from weather to diet and gender norms.

Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry

Energy Technology Data Exchange (ETDEWEB)

Kermeli, Katerina; Worrell, Ernst; Masanet, Eric

2011-12-01

The U.S. concrete industry is the main consumer of U.S.-produced cement. The manufacturing of ready mixed concrete accounts for more than 75% of the U.S. concrete production following the manufacturing of precast concrete and masonry units. The most significant expenditure is the cost of materials accounting for more than 50% of total concrete production costs - cement only accounts for nearly 24%. In 2009, energy costs of the U.S. concrete industry were over $610 million. Hence, energy efficiency improvements along with efficient use of materials without negatively affecting product quality and yield, especially in times of increased fuel and material costs, can significantly reduce production costs and increase competitiveness. The Energy Guide starts with an overview of the U.S. concrete industry’s structure and energy use, a description of the various manufacturing processes, and identification of the major energy consuming areas in the different industry segments. This is followed by a description of general and process related energy- and cost-efficiency measures applicable to the concrete industry. Specific energy and cost savings and a typical payback period are included based on literature and case studies, when available. The Energy Guide intends to provide information on cost reduction opportunities to energy and plant managers in the U.S. concrete industry. Every cost saving opportunity should be assessed carefully prior to implementation in individual plants, as the economics and the potential energy and material savings may differ.

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

Energy Technology Data Exchange (ETDEWEB)

Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

2011-10-13

An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly

Effects of Biochar on the Net Greenhouse Gas Emissions under Continuous Flooding and Water-Saving Irrigation Conditions in Paddy Soils

Directory of Open Access Journals (Sweden)

Le Qi

2018-05-01

Full Text Available In this study, we investigated the greenhouse gas emission under different application of biochar in the conditions of continuous flooding and water-saving irrigation in paddy fields, whereas, plant and soil carbon sequestration were considered in the calculation of net greenhouse gas emissions. The emission rates of methane (CH4, carbon dioxide (CO2, and nitrous oxide (N2O gases were simultaneously monitored once every 7–10 days using the closed-chamber method. As a whole, the net greenhouse gas emission in the water-saving irrigation was more than that of the continuous flooding irrigation conditions. Compared with the water-saving irrigation, the continuous flooding irrigation significantly increased the CH4 in the control (CK and chemical fertilizer treatments (NPK. The CO2 emissions increased in each treatment of the water-saving irrigation condition, especially in the chemical fertilizer treatments (NPKFW. Similarly, the soil N2O emission was very sensitive to the water-saving irrigation condition. An interesting finding is that the biochar application in soils cut down the soil N2O emission more significantly than NPKFW in the water-saving irrigation condition while the effect of biochar increased under the continuous flooding irrigation condition.

The effect of net foreign assets on saving rate

Directory of Open Access Journals (Sweden)

Ben David Nissim

2014-01-01

Full Text Available Observing empirical data we find that many countries try to delay the decision of increasing saving rate in order to avoid a decrease of the living standards. However the delay leads a deterioration of countries financial stability. We present a simple theoretical model that connects between countries' saving rate and their net foreign assets. Using cross section data set of 135 countries in 2010 we estimated the econometric relation between saving rate in 2010 as dependent variable and two explanatory variables: the current account in 2010 and the aggregated current account during 1980-2010. Our findings show that industrial countries in a bad financial state tend to decrease their saving rate as external debt is larger causing to deterioration in external debt while countries with good financial state tend to increase their saving rate and the tendency increase as financial state becomes better. Only in countries with a very large external debt saving rate tends to grow. The results point that gross foreign debt will keep increasing and will worsen world financial state causing increased risk of getting into a world crisis.

THE PUZZLE OF SIMULTANEOUS SAVINGS AND DEBTS

Directory of Open Access Journals (Sweden)

RODICA IANOLE

2012-05-01

Full Text Available „Neither a borrower nor a lender be” recommends Shakespeare in Hamlet. The advice seems particularly interesting in nowadays society where a person can be easily found in both approximate situations, in the same time. It goes without saying that saving and borrowing do not describe mutually exclusive strategies of financial management and thus many people retain savings or carry on saving at the same time as having debts. We add to this fact a more pragmatically wisdom, the one of the economist Robert Solow -“We (economists think of wealth as fungible; we think a dollar is a dollar. Why don't they (the others do so?” (Solow, 1987 – and we naturally ask ourselves if the mechanism of having simultaneous savings and debts is a rational one, according to traditional economics.Making appeal to the emerging body of behavioral economics literature we reach to the mental accounting theory to see if it can explain savings inclination versus debt inclination. The main research question we want to explore is the following: if mental accounting prevents people from spending money from one „mental account” on goods belonging to another one, will people – after using all their money from a given account – be willing to go into debt to buy goods belonging to this account in a situation when they still have money in other accounts?

Non-Declarative Sequence Learning does not Show Savings in Relearning

OpenAIRE

Keisler, Aysha; Willingham, Daniel T.

2007-01-01

Researchers have utilized the savings in relearning paradigm in a variety of settings since Ebbinghaus developed the tool over a century ago. In spite of its widespread use, we do not yet understand what type(s) of memory are measurable by savings. Specifically, can savings measure both declarative and non-declarative memories? The lack of conscious recollection of the encoded material in some studies indicates that non-declarative memories may show savings effects, but as all studies to date...

Potential energy savings from cool roofs in Spain and Andalusia

International Nuclear Information System (INIS)

Boixo, Sergio; Diaz-Vicente, Marian; Colmenar, Antonio; Castro, Manuel Alonso

2012-01-01

Cool roofs are an inexpensive method to save energy and to improve the comfort level in buildings in mild and hot climates. A high scale implementation of cool roofs in Andalusia, in the south of Spain, could potentially save 295,000 kWh per year, considering only residential buildings with flat roofs using electrical heating. At the current energy prices, consumers can save 59 million euros annually in electricity costs and the emission of 136,000 metric tons of CO 2 can be directly avoided every year from the production of that electricity. If radiative forcings are considered, Andalucía can potentially offset between 9.44 and 12 Mt of CO 2 . All the provinces in the rest of Spain are also studied in this paper. The biggest savings are achieved in Gran Canaria (48%), Tenerife (48%), Cádiz (36%), Murcia (33%), Huelva (30%), Málaga (29%), Almería (29%) and Sevilla (28%), where savings are greater than 2 euros per square meter of flat roof for old buildings with dark roofs. For the biggest cities the range of savings obtained are: between 7.4% and 11% in Madrid, between 12% and 18% in Barcelona and between 14% and 20% in Valencia. -- Highlights: ► We estimate potential savings in energy, CO 2 , and money for cool roofs in Spain (residential sector with flat roofs). ► Average savings are of around one euro per square meter in the biggest cities. ► Potential savings are of more than 2 €/m 2 in the hottest cities. ► In Andalusia the potential savings are 300 MWh, 60 millions euro and 136,000 tons of CO 2 per year. ► With forcings, the CO 2 equivalence of cool roofs in Andalusia is between 9 and 12 Mt.

Evaluation of Different Power Saving Techniques for MBMS Services

Directory of Open Access Journals (Sweden)

Antonios Alexiou

2009-01-01

Full Text Available Over the last years we have witnessed an explosive growth of multimedia computing, wireless communication and applications. Following the rapid increase in penetration rate of broadband services, the Third Generation Partnership Project (3GPP is currently standardizing the Evolved-Multimedia Broadcast/Multicast Service (E-MBMS framework of Long Term Evolution (LTE, the successor of Universal Mobile Telecommunications System (UMTS. MBMS constitutes a point-to-multipoint downlink bearer service that was designed to significantly decrease the required radio and wired link resources. However, several obstacles regarding the high-power requirements should be overcome for the realization of MBMS. Techniques, such as Macrodiversity Combining and Rate Splitting, could be utilized to reduce the power requirement of delivering multicast traffic to MBMS users. In this paper, we analytically present several power saving techniques and analyze their performance in terms of power consumption. We provide simulation results that reveal the amount of power that is saved and reinforce the need for the usage of such techniques.

The energetic savings of sleep versus temperature in the Desert Iguana (Dipsosaurus dorsalis) at three ecologically relevant temperatures.

Science.gov (United States)

Revell, Timothy K; Dunbar, Stephen G

2007-10-01

One of the proposed ecological functions of sleep is to conserve energy. The majority of studies that support this theory have been done on endothermic animals whose body temperatures drop during sleep due to the reduced neurological control of thermoregulation. In the present study, we examined typical temperatures to which the Desert Iguana, Dipsosaurus dorsalis, is exposed to in the field and found that mean high temperatures ranged from 24-58 degrees C throughout the active portion of the year. We also examined the ecological savings that sleep could provide for this ectothermic iguana using a closed system respirometer. We found that laboratory-acclimated iguanas are able to save significantly more (27.6%) energy by sleeping than by being awake and that field iguanas also had significant savings of energy (69.1%) while asleep. However, iguanas could save more energy by remaining awake at cooler temperatures than by sleeping at warmer temperatures. In addition, we found no correlation for time of night with metabolic rate. Our study supports the hypothesis that one potential function of sleep is to conserve energy.

Significant weight loss following clozapine use, how is it possible? A case report and review of published cases and literature relevant to the subject.

Science.gov (United States)

Tungaraza, Tongeji E

2016-10-01

It has been repeatedly shown that clozapine is more efficacious than other antipsychotics in the management of treatment-resistant schizophrenia. However, clozapine is associated with a number of side effects including weight gain. Antipsychotic-induced weight gain has been linked with a number of untoward events including psychological factors such as stigma and low self-esteem, and physical factors such as metabolic syndromes and untimely death. The mechanism underlying antipsychotic (including clozapine)-induced weight gain is not clearly understood, although it is said to involve several brain areas, several neurotransmitters, neuropeptides and genetic factors. To some individuals however, clozapine use is associated with significant weight loss (13.5-50% of body weight). The observed weight loss in these groups of patients has not been attributed to any underlying diagnosable physical disorders. There have been a handful cases published with this phenomenon, which seems to be contrary to what is expected when clozapine is prescribed. From the currently published cases three groups emerge - those who lost weight simply by taking clozapine, those who lost weight due to improved mental state, engaging in diet and increased exercise, and those for whom weight loss was a sign of a poor response to clozapine. A case of JX who has a diagnosis of schizoaffective disorder is presented. JX lost over 26% of her body weight when she was prescribed clozapine. A detailed review of other published cases is undertaken. The underlying mechanisms involving weight loss are discussed and the implications to clinicians are highlighted. Coordinated studies to examine these groups of patients may provide some insight, not only in the mechanism of clozapine-induced weight loss, but also in the better management of patients with treatment-resistant schizophrenia involving clozapine use.

Individual savings accounts for social insurance

DEFF Research Database (Denmark)

Bovenberg, Lans; Hansen, Martin Ino; Sørensen, Peter Birch

2008-01-01

Using Danish data, we find that about three-fourths of the taxes levied to finance public transfers actually finance benefits that redistribute income over the life cycle of individual taxpayers rather than redistribute resources across people. This finding and similar results for other countries...... provide a rationale for financing part of social insurance via mandatory individual savings accounts. We discuss the advantages and disadvantages of mandatory individual savings accounts for social insurance and survey some recent alternative proposals for such accounts...

Self-perception of body weight status and weight control practices among adolescents in Malaysia.

Science.gov (United States)

Zainuddin, Ahmad Ali; Manickam, Mala A; Baharudin, Azli; Omar, Azahadi; Cheong, Siew Man; Ambak, Rashidah; Ahmad, Mohamad Hasnan; Ghaffar, Suhaila Abdul

2014-09-01

The prevalence of overweight and obesity among adolescents is rising rapidly in many countries, including Malaysia. This article aims to present the associations between body mass index-based body weight status, body weight perception, and weight control practices among adolescents in Malaysia. The Malaysia School Based Nutrition Survey 2012, which included a body weight perception questionnaire and anthropometric measurements, was conducted on a representative sample of 40 011 students from Standard 4 until Form 5, with a 90.5% response rate. Comparing actual and perceived body weight status, the findings show that 13.8% of adolescents underestimated their weight, 35.0% overestimated, and 51.2% correctly judged their own weight. Significantly more normal weight girls felt they were overweight, whereas significantly more overweight boys perceived themselves as underweight. The overall appropriateness of weight control practices to body weight was 72.6%. Adolescents attempting to lose or gain weight need to have better understanding toward desirable behavioral changes. © 2014 APJPH.

Energy savings through self-backhauling for future heterogeneous networks

International Nuclear Information System (INIS)

Faruk, Nasir; Ruttik, Kalle; Mutafungwa, Edward; Jäntti, Riku

2016-01-01

Mobile operators face continuous challenge of enhancing network capacity and coverage so as to meet demand for ubiquitous high-speed mobile data connectivity. Unfortunately, these enhancements are typically accompanied by increased burden of network energy consumption. Heterogeneous network (HetNet) deployments of a large number of low power small base stations (SBS) to complement existing macro base stations is an approach that increases network capacity but potentially reduces overall network energy consumption. The SBS backhaul links in HetNets present a significant powering burden. In this paper, we show how self backhauling of SBS can reduce overall network power demand. A backhaul-energy consumption model is developed and used to investigate the energy efficiency of different backhauling options. We note that significant energy savings could be achieved through the use of self-backhauling when compared with the conventional microwave backhauling. The results presented would provide guidelines for energy- and cost-efficient backhaul implementation for future HetNets. - Highlights: • A backhaul-energy consumption model is developed. • Self backhauling of small base stations can reduce overall network power demand. • Energy saving strategy presented would relieved the burden on the power networks. • Results provide guidelines for energy and cost effective backhaul implementation.

The influence of Multiple Goals on Driving Behavior: the case of Safety, Time Saving, and Fuel Saving

OpenAIRE

DOGAN, Ebru; STEG, Linda; DELHOMME, Patricia

2011-01-01

Due to the innate complexity of the task drivers have to manage multiple goals while driving and the importance of certain goals may vary over time leading to priority being given to different goals depending on the circumstances. This study aimed to investigate drivers' behavioral regulation while managing multiple goals during driving. To do so participants drove on urban and rural roads in a driving simulator while trying to manage fuel saving and time saving goals, besides the safety goal...

The Rhode Island Life Saving Score (RILSS)--a proposed life-saving definition for EMS and emergency medicine.

Science.gov (United States)

Williams, Kenneth A; Sullivan, Francis M

2013-12-03

Emergency Medical Services (EMS) and Emergency Medicine staff are often described as life-saving providers, but there is no generally accepted objective definition of a life saved by these providers. Therefore, a proposed definition is described. Development of this definition began with conceptual rules, followed by a survey of physician EMS medical directors, and then by the development of a tool to implement the definition, and measure its validity and reliability through a review of 100 critical care transport EMS patient charts.

Reform Proposals for Replenishing Retirement Savings

Directory of Open Access Journals (Sweden)

Jack M. Mintz

2013-02-01

Full Text Available The 2008-2009 economic crisis dealt a serious blow to Canadians’ retirement savings. While markets have since partially recovered, the ratio of Canadians’ household net-worth relative to disposable income still remains below where it was in 2007. So much wealth that workers had accumulated to prepare for retirement has been wiped away, while the years since 2008 that might have otherwise been spent compounding retirement savings have been spent, instead, on trying to recover losses in a low-interest-rate environment that has limited returns. With large waves of older workers approaching retirement age, and these future retirees projected to live longer than previous cohorts, Canada now faces the very realistic scenario that a significant number of people will reach retirement age without the funds they will need to provide a comfortable post-working-life income. Canadian policy-makers may not have the ability to restore that destroyed wealth. And with most governments already struggling to resolve serious deficits, the situation is not likely to be ameliorated with anything that requires additional spending, or that could reduce tax revenues. But there are policy reforms available that can help at least in better preparing the coming waves of retirees for a financially secure retirement. The reforms need not be far-reaching to have a meaningful impact. And they need not be costly, either. They can include a modest expansion of the Canada Pension Plan (CPP to allow larger contributions — shared by employers and employees, or covered entirely by employees — that would, in turn, allow retiring workers to draw a larger maximum pension, rather than having to rely on the guaranteed income supplement (GIS. CPP contributions could also be made deductible from taxable income, like RRSP investments, to encourage workers to maximize contributions. To minimize an increase in payroll taxes, the eligibility age for CPP benefits could be increased to

The influences of financial and non-financial factors on energy-saving behaviour: A field experiment in Japan

International Nuclear Information System (INIS)

Mizobuchi, Kenichi; Takeuchi, Kenji

2013-01-01

This study examines the influences of financial and non-financial factors on electricity-conservation behaviour. A random sample of 236 Japanese households participated in the field experiment and the participants were offered two interventions, such as monetary rewards, depending on their reduction in electricity consumption and comparative feedback. The average saving rates of the (i) reward-intervention group (5.9%) and the (ii) reward with comparative feedback group (8.2%) are statistically larger than those of the (iii) control group (1.7%). Our study demonstrates the following. First, our econometric analysis confirmed a significant response by households to financial incentives but a more inconclusive response to the treatment that provided non-financial, additional information. Second, we found a positive influence of treatment externalities across time and households on energy saving. Third, there is a heterogeneous treatment effect in the reward-intervention group, with the households having a high New Ecological Paradigm (NEP) score being more likely to respond to the reward programme and save electricity than those that do not. Finally, and most interestingly, differences in responses to the questionnaire before and after the experiment suggest that the participants had underestimated the marginal costs of saving electricity before they actually started to do so. - highlights: • We studied the effects of (non-)financial factors on household electricity use. • Financial factors had a significant effect; non-financial ones were inconclusive. • Externalities had a positive effect across time and households on saving energy. • There is a heterogeneous treatment effect in financial-reward intervention. • Before the experiment, participants underestimated the marginal costs of saving electricity

Saving energy resources during heat treatment - the most important problem of the branch

Energy Technology Data Exchange (ETDEWEB)

Zadernovskiy, V V; Firger, I V

1980-01-01

Natural gas fired thermal furnaces expend significantly less fuel than electric furnaces with an equal quality of metal heating. An important reserve in power reserve economy is the use of the forging heat in an article for heat treatment (TOB), where besides the power resources, metal is also saved as a result of the reduction in the volume of heating means and production spaces. From the experience in the progressive enterprises of the branch, in a number of cases it is possible to combine heating for plastic deformation with heating for primary or secondary heat treatment. Other measures are examined which save power resources in heat treatment: the use of thermal furnaces for aerodynamic heating, the use of local heat treatment, the reduction in the duration of the heat treatment processes, savings in the power carriers during heat treatment in furnaces with a roll out hearth. Fibrous refractory materials are being used more and more as fettling materials in the construction of thermal furnaces.

Energy-saving framework for passive optical networks with ONU sleep/doze mode.

Science.gov (United States)

Van, Dung Pham; Valcarenghi, Luca; Dias, Maluge Pubuduni Imali; Kondepu, Koteswararao; Castoldi, Piero; Wong, Elaine

2015-02-09

This paper proposes an energy-saving passive optical network framework (ESPON) that aims to incorporate optical network unit (ONU) sleep/doze mode into dynamic bandwidth allocation (DBA) algorithms to reduce ONU energy consumption. In the ESPON, the optical line terminal (OLT) schedules both downstream (DS) and upstream (US) transmissions in the same slot in an online and dynamic fashion whereas the ONU enters sleep mode outside the slot. The ONU sleep time is maximized based on both DS and US traffic. Moreover, during the slot, the ONU might enter doze mode when only its transmitter is idle to further improve energy efficiency. The scheduling order of data transmission, control message exchange, sleep period, and doze period defines an energy-efficient scheme under the ESPON. Three schemes are designed and evaluated in an extensive FPGA-based evaluation. Results show that whilst all the schemes significantly save ONU energy for different evaluation scenarios, the scheduling order has great impact on their performance. In addition, the ESPON allows for a scheduling order that saves ONU energy independently of the network reach.

Synthesis of new aluminum nano hybrid composite liner for energy saving in diesel engines

International Nuclear Information System (INIS)

Tiruvenkadam, N.; Thyla, P.R.; Senthilkumar, M.; Bharathiraja, M.; Murugesan, A.

2015-01-01

Highlights: • Nano hybrid composite cylinder liner (NL) was developed to replace cast iron liner. • NL improved engine performance, combustion and reduced emissions except NO x . • Teardown analysis provides the suitability of NL for diesel engine. • The developed aluminum NL saved 43.75% of weight than cast iron cylinder liner. - Abstract: This work aims to replace the conventional cast iron cylinder liner (CL) in diesel engine by introducing lightweight aluminum (Al) 6061 nano hybrid composite cylinder liner (NL) by analyzing the performance, combustion, and emission characteristics of an engine. NL was fabricated by bottom pouring stir casting technique with nano- and micro-reinforcement materials. Experimental results proved that the use of NL increased brake thermal efficiency, in-cylinder pressure, heat release rate, and reduced carbon monoxide, hydrocarbon, and smoke emission in comparison with CL. However, oxides of nitrogen slightly increased with the use of the new liner. No differences in wear or other issues were noted during the engine teardown after 1 year of operation and 2000 h of running. Thus, NL has been recommended to replace the CL to save the energy and to reap environmental benefits

Exploring Demand Charge Savings from Commercial Solar

Energy Technology Data Exchange (ETDEWEB)

Darghouth, Naim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wiser, Ryan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gagnon, Pieter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-07-31

Commercial retail electricity rates commonly include a demand charge component, based on some measure of the customer’s peak demand. Customer-sited solar PV can potentially reduce demand charges, but the magnitude of these savings can be difficult to predict, given variations in demand charge designs, customer loads, and PV generation profiles. Moreover, depending on the circumstances, demand charges from solar may or may not align well with associated utility cost savings. Lawrence Berkeley National Laboratory (Berkeley Lab) and the National Renewable Energy Laboratory (NREL) are collaborating in a series of studies to understand how solar PV can reduce demand charge levels for a variety of customer types and demand charges designs. Previous work focused on residential customs with solar. This study, instead, focuses on commercial customers and seeks to understand the extent and conditions under which rooftop can solar reduce commercial demand charges. To answer these questions, we simulate demand charge savings for a broad range of commercial customer types, demand charge designs, locations, and PV system characteristics. This particular analysis does not include storage, but a subsequent analysis in this series will evaluate demand charge savings for commercial customers with solar and storage.

Perceived weight discrimination, childhood maltreatment, and weight gain in U.S. adults with overweight/obesity.

Science.gov (United States)

Udo, Tomoko; Grilo, Carlos M

2016-06-01

Perceived weight discrimination and childhood maltreatment have been independently associated with physical and mental health issues, as well as weight gain. It is not known, however, whether childhood maltreatment modifies the relationship between perceived weight discrimination and weight changes. This study examined the relationship between perceived weight discrimination, childhood maltreatment, and changes in body mass index (BMI) over 3 years in 21,357 men and women with overweight and obesity from Wave 1 and Wave 2 surveys of the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). Reporting childhood maltreatment, regardless of the specific form of maltreatment, was associated with a significantly greater likelihood of perceived weight discrimination in women. Perceived weight discrimination was associated with a significantly greater increase in BMI in both genders. Among all women with perceived weight discrimination, those who also reported having experienced childhood maltreatment had significantly less BMI increase compared to those reporting not having experienced childhood maltreatment. Perceived weight discrimination may foster weight gain rather than encouraging weight loss in individuals with overweight/obesity and should be addressed in prevention efforts and clinical settings. Childhood maltreatment may perhaps sensitize individuals to subsequent stressors and increase vulnerability to perceived weight discrimination, particularly in women. © 2016 The Obesity Society.

Barriers to investments in energy saving technologies. Case study for the industry

NARCIS (Netherlands)

Masselink, Dirk Jan

2007-01-01

To realise future energy saving targets, the government needs to increase energy reduction rates. One option to increase energy savings is found in removing barriers to investments in cost-effective energy saving technologies. Many technologies save energ

Net-Zero Building Technologies Create Substantial Energy Savings -

Science.gov (United States)

only an estimated 1% of commercial buildings are built to net-zero energy criteria. One reason for this Continuum Magazine | NREL Net-Zero Building Technologies Create Substantial Energy Savings Net -Zero Building Technologies Create Substantial Energy Savings Researchers work to package and share step

Energy-saving measures in multi-storage housing construction

Directory of Open Access Journals (Sweden)

Мария Дмитриевна Коровина

2017-05-01

Full Text Available In this article the main directions of energy saving in multi-storey housing construction and methods for increasing energy efficiency are considered. The main problems of implementing energy-saving measures were touched; the need for their analysis during the development of each construction project with a view to choosing the most effective complex from the energy, economic, ecological and social points of view was justified. It is noted that such an approach can become an important factor of saving energy in the sphere of housing construction and reducing the energy intensity of the entire Russian economy.

Measuring the effect of procrastination and environmental awareness on households' energy-saving behaviours: An empirical approach

International Nuclear Information System (INIS)

Lillemo, Shuling Chen

2014-01-01

A common finding in behavioural economics is that people often procrastinate, i.e., keep postponing planned tasks or decisions that require effort to execute. The effect of procrastination on inter-temporal energy choice behaviours could be even more serious because energy is an abstract, invisible and intangible commodity. This paper uses a web survey to investigate how people's procrastination propensity and environmental awareness affect their heating-energy-saving behaviours. The results indicate that people who state that they have a higher tendency to procrastinate are significantly less likely to have engaged in most of the heating energy-saving activities, especially regarding larger purchases or investments in equipment and the insulation of doors and windows. I also found a positive relationship between environmental awareness and engaging in everyday energy-saving activities such as reducing the indoor temperature. The findings suggest that measures aimed at reducing procrastination are needed to realise energy-saving potential. It is important to find ways to either bring future benefits closer to the present or to magnify the costs of delayed action. For example, one can employ certain feedback systems and commitment devices to make current gains and future costs more visible or tangible. - Highlights: • Norwegian online survey on factors affecting households' heating energy saving activities. • Identify the effect of procrastination and environmental awareness in energy saving decision making. • People with a higher tendency to procrastinate are less likely to engage in energy saving activities. • Procrastination can limit the positive effect of environmental awareness on energy saving. • Innovative behavioural measures are suggested to bring people's “energy saving plans or decisions” to action

Listening to the vocal citizens: how do politically active individuals choose between life saving programs?

Energy Technology Data Exchange (ETDEWEB)

Ramsberg, J. [Stockholm School of Economics, Stockholm (Sweden)

1998-07-01

Large disparities in the cost per life saved for different life saving interventions have been reported in many studies. According to some researchers, these differences reflect the public's preoccupation with selected qualitative aspects of risk. However, it is not obvious that these disparities reflect public preferences. In studies of the variation in cost per life saved the public accept, most respondents are willing to trade qualitative characteristics for lives saved, but there is a small but significant group of respondents who will not make the tradeoff, i.e. assign infinite value to one or more of the qualitative factors. It has been suggested that this group could be particularly vocal, which might account for the large variation in cost per life saved. In the first attempt to address this issue, a survey of people living under a power line in Stockholm was undertaken. This population was chosen because the local government had decided to remove the power line after being pressured by the citizens and on interest group. Tests of how more politically active individuals differ from less active were undertaken. Most importantly, it was found that more politically active respondents were less likely to trade qualitative characteristics for lives saved, but only for the risk in which they were active and only up to a point. There still was a group of respondents who were unwilling to make the tradeoff. (author)

Energy-Saving Melting and Revert Reduction Technology (E-SMARRT): Final Summary Report

Energy Technology Data Exchange (ETDEWEB)

White, Thornton C [SCRA Appiled R& D

2014-03-31

Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) is a balanced portfolio of R&D tasks that address energy-saving opportunities in the metalcasting industry. E-SMARRT was created to: • Improve important capabilities of castings • Reduce carbon footprint of the foundry industry • Develop new job opportunities in manufacturing • Significantly reduce metalcasting process energy consumption and includes R&D in the areas of: • Improvements in Melting Efficiency • Innovative Casting Processes for Yield Improvement/Revert Reduction • Instrumentation and Control Improvement • Material properties for Casting or Tooling Design Improvement The energy savings and process improvements developed under E-SMARRT have been made possible through the unique collaborative structure of the E-SMARRT partnership. The E-SMARRT team consisted of DOE’s Office of Industrial Technology, the three leading metalcasting technical associations in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders’ Society of America; and SCRA Applied R&D, doing business as the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. This team provided collaborative leadership to a complex industry composed of approximately 2,000 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, these new processes and technologies that enable energy efficiencies and environment-friendly improvements would have been slow to develop and had trouble obtaining a broad application. The E-SMARRT R&D tasks featured low-threshold energy efficiency improvements that are attractive to the domestic industry because they do not require major capital investment. The results of this portfolio of projects are significantly reducing metalcasting process energy consumption while improving the important capabilities of metalcastings. Through June

Large Hospital 50% Energy Savings: Technical Support Document

Energy Technology Data Exchange (ETDEWEB)

Bonnema, E.; Studer, D.; Parker, A.; Pless, S.; Torcellini, P.

2010-09-01

This Technical Support Document documents the technical analysis and design guidance for large hospitals to achieve whole-building energy savings of at least 50% over ANSI/ASHRAE/IESNA Standard 90.1-2004 and represents a step toward determining how to provide design guidance for aggressive energy savings targets. This report documents the modeling methods used to demonstrate that the design recommendations meet or exceed the 50% goal. EnergyPlus was used to model the predicted energy performance of the baseline and low-energy buildings to verify that 50% energy savings are achievable. Percent energy savings are based on a nominal minimally code-compliant building and whole-building, net site energy use intensity. The report defines architectural-program characteristics for typical large hospitals, thereby defining a prototype model; creates baseline energy models for each climate zone that are elaborations of the prototype models and are minimally compliant with Standard 90.1-2004; creates a list of energy design measures that can be applied to the prototype model to create low-energy models; uses industry feedback to strengthen inputs for baseline energy models and energy design measures; and simulates low-energy models for each climate zone to show that when the energy design measures are applied to the prototype model, 50% energy savings (or more) are achieved.

Sign Up for Savings.

Science.gov (United States)

Kennedy, Mike

2002-01-01

Discusses performance service contracts between educational facilities and energy services companies, in which the company provides the money for energy-efficiency improvements and the school pays the company an annual fee. The company guarantees the savings will meet or exceed the fee. (EV)

Relationship of saving habit determinants among undergraduate students: A case study of UiTM Negeri Sembilan, Kampus Seremban

Science.gov (United States)

Syahrom, N. S.; Nasrudin, N. S.; Mohamad Yasin, N.; Azlan, N.; Manap, N.

2017-08-01

It has been reported that students are already accumulating substantial debt from higher education fees and their spending habit are at a critical stage. These situations cause the youngsters facing bankruptcy if they cannot improve their saving habit. Many researches have acknowledged that the determinants of saving habit include financial management, parental socialization, peer influence, and self-control. However, there remains a need for investigating the relationship between these determinants in order to avoid bankruptcy among youngsters. The objectives of this study are to investigate the relationship between saving habit determinants and to generate a statistical model based on the determinants of saving habit. Data collection method used is questionnaire and its scope is undergraduate students of UiTM Negeri Sembilan, Kampus Seremban. Samples are chosen by using stratified probability sampling technique and cross-sectional method is used as the research design. The results are then analysed by using descriptive analysis, reliability test, Pearson Correlation, and Multiple Linear Regression analysis. It shows that saving habit and self-control has no relationship. It means that students with less self-control tend to save less. A statistical model has been generated that incorporated this relationship. This study is significant to help the students save more by having high self-control.

FY 1997 cost savings report

International Nuclear Information System (INIS)

Sellards, J.B.

1998-01-01

With the end of the cold war, funding for the Environmental Management program increased rapidly as nuclear weapons production facilities were shut down, cleanup responsibilities increased, and facilities were transferred to the cleanup program. As funding for the Environmental Management (EM) program began to level off in response to Administration and Congressional efforts to balance the Federal budget, the program redoubled its efforts to increase efficiency and get more productivity out of every dollar. Cost savings and enhanced performance are an integral pair of Hanford Site operations. FY1997 was the third year of a cost savings program that was initially defined in FY 1995. The definitions and process remained virtually the same as those used in FY 1996

Study on measuring analysis for estimating effect of energy saving policy

Energy Technology Data Exchange (ETDEWEB)

Kim, Joong Ku; Park, Jeong Soon [Korea Energy Economics Institute, Euiwang (Korea)

1999-12-01

Since the study on measuring analysis for estimating effect of energy saving policy is too broad to implement all industries, so it limited its study only on manufacturing industry. This study is concentrated on its effort to measure energy saving using energy saving model by putting energy saving policy as an input and regarding its result as energy saving. It used B/C theory for positive analysis methodology and the result of analysis is investment effect on manufacturing industry. The total cost invested on manufacturing sector from 1982 to 1996 was 5,871 billion won based on constant cost in 1990, and the energy saving cost directly acquired from it reached 1,534.5 billion won based on constant cost in 1990, so B/C rate reached 2.56. Particularly, if you separated the amount supported by the government policy, energy saving support cost reached 3,904.2 billion won (based on constant cost in 1990) and the total benefit was 10,146.4 billion won (based on constant cost in 1990) by adding saving cost 9,997.9 billion won and environmental improvement effect 223.2 billion won. (author). 51 refs., 17 figs., 35 tabs.

76 FR 71437 - Mutual Savings Association Advisory Committee

Science.gov (United States)

2011-11-17

... (MSAAC or Committee) formerly administered by the Office of Thrift Supervision, as it is necessary and in...: Timothy T. Ward, Deputy Comptroller for Thrift Supervision, 250 E Street SW., Washington, DC 20219. FOR... as federal savings associations (including federal savings banks); and (2) issue charters therefore...

casual relationship between gross domestic saving and economic

African Journals Online (AJOL)

TOSHIBA

private saving has both direct and indirect effects on economic growth. ... sector have a bigger impact on GDP than gross domestic savings. ... Development economists have been concerned for decades about the crucial role of ..... higher investment and higher economic growth is not supported by East African countries.

12 CFR 591.3 - Loans originated by Federal savings associations.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Loans originated by Federal savings... PREEMPTION OF STATE DUE-ON-SALE LAWS § 591.3 Loans originated by Federal savings associations. (a) With regard to any real property loan originated or to be originated by a Federal savings association, as a...

Advanced Energy Saving and its Applications in Industry

CERN Document Server

Matsuda, Kazuo; Fushimi, Chihiro; Tsutsumi, Atsushi; Kishimoto, Akira

2013-01-01

The conventional approach for energy saving in a process system is to maximize heat recovery without changing any process conditions by using pinch technology. “Self-heat recuperation technology” was developed to achieve further energy saving in the process system by eliminating the necessity for any external heat input, such as firing or imported steam. Advanced Energy Saving and its Applications in Industry introduces the concept of self-heat recuperation and the application of such technology to a wide range of processes from heavy chemical complexes to other processes such as drying and gas separation processes, which require heating and cooling during operation.   Conventional energy saving items in a utility system are applied and implemented based on a single site approach, however, when looking at heavy chemical complexes, it was apparent that the low-grade heat discharged as waste from a refinery could also be used in an adjacent petrochemical plant. There could therefore be a large energy savin...

Nuclear recycling: costs, savings, and safeguards

International Nuclear Information System (INIS)

Spinrad, B.I.

1985-01-01

This chapter discusses the economics, physical and chemical processes, and safety of nuclear fuel recycling. The spent fuel must be chemically reprocessed in order to recover uranium and plutonium. Topics considered include indifference costs, recycling in light water reactors (LWRs), plutonium in fast reactors, the choice between recycling and storage, safeguards, and weapons proliferation. It is shown that the economics of recycling nuclear fuel involves the actual costs and savings of the recycling operation in terms of money spent, made, and saved, and the impact of the recycling on the future cost of uranium

Assessing the value of pulp mill biomass savings in a climate change conscious economy

International Nuclear Information System (INIS)

Adahl, Anders; Harvey, Simon; Berntsson, Thore

2006-01-01

Pulp mills use significant amounts of biofuels, both internal and purchased. Biofuels could contribute to reach greenhouse gas emission targets at competitive costs. Implementing process integration measures at a pulp mill in order to achieve pulp production with less use of energy (biofuels) has not only on-site consequences but also off-site consequences, such as substitution of fossil fuels elsewhere by the saved pulp mill biofuels, and less on-site electric power generation. In this paper a method, a linking model, is suggested to analyse pulp mill biofuel saving measures when carbon dioxide (CO 2 ) external costs are internalised. The linking model is based on equilibrium economics and links information from CO 2 constrained energy market future scenarios with process integration measures. Pulp mill economics and marginal energy market CO 2 response are identified. In an applied study, four process integration measures at a Swedish pulp mill were analysed using five energy market future scenarios emanating from a Nordic energy model. The investigated investment alternatives for biofuel savings all result in positive net annual savings, irrespectively of the scenario used. However, CO 2 emissions may increase or decrease depending on the future development of the Nordic energy market

Electricity-cost savings obtained by means of nuclear plant life extension

International Nuclear Information System (INIS)

Forest, L.; Fletcher, T.; DuCharme, A.; Harrison, D.L.

1987-01-01

This study examines savings caused by nuclear-plant life extension (NUPLEX) and describes the effects of changes in assumptions on costs and technology using an approach simpler than the large economic-model simulations used in other reports. Under the simplified approach, we estimate savings at the broad national level by comparing projected costs/kWh for the typical NUPLEX plant with those for new coal-fired plants, which seem the most likely alternative in most regions. While ignoring some complications handled by the large, regionally disaggregated econometric models, the approach used in this study has advantages in sensitivity analyses. It reveals relationships between savings and basic assumptions on costs and technology in a more transparent way than in large-model simulations. We find that, absent major technological breakthroughs for present generating options, NUPLEX saves consumers money on their electric bills under most plausible economic scenarios. Using mid-range assumptions, we find that NUPLEX saves consumers a total of about dollar 180 billion spread over the period 2010-50. Under optimistic assumptions, the savings swell to over dollar 900 billion. Under extremely pessimistic assumptions, the savings actually turn negative. This wide range of estimates largely reflects the uncertainty in cost projections. Within plausible limits, higher- or lower-than-expected load growth does not affect the savings estimates. The NUPLEX construction costs stand out as the most critical unknown. If they turn out to be 50% (dollar 500 billion) above the baseline estimate savings would fall by almost 60% (dollar 105 billion). A 50% rise in nuclear fuel costs would drop baseline savings by almost 22%. A 50% increase in nuclear-plant operations-and-maintenance costs, would cut baseline savings by about 36%. These sensitivities highlight the need for continued monitoring of economic developments

The modern water-saving agricultural technology: Progress and focus

African Journals Online (AJOL)

GREGORY

2010-09-13

Sep 13, 2010 ... saving agricultural technology, which include modern biological water-saving technology, unconventional ... and innovation, water, nutrient migration theory, regula- .... urban sewage of more than 50%; Mexico City, 90% of.

Executive function in weight loss and weight loss maintenance: a conceptual review and novel neuropsychological model of weight control.

Science.gov (United States)

Gettens, Katelyn M; Gorin, Amy A

2017-10-01

Weight loss maintenance is a complex, multifaceted process that presents a significant challenge for most individuals who lose weight. A growing body of literature indicates a strong relationship between cognitive dysfunction and excessive body weight, and suggests that a subset of high-order cognitive processes known as executive functions (EF) likely play an important role in weight management. Recent reviews cover neuropsychological correlates of weight status yet fail to address the role of executive function in the central dilemma of successful weight loss maintenance. In this paper, we provide an overview of the existing literature examining executive functions as they relate to weight status and initial weight loss. Further, we propose a novel conceptual model of the relationships between EF, initial weight loss, and weight loss maintenance, mapping specific executive functions onto strategies known to be associated with both phases of the weight control process. Implications for the development of more efficacious weight loss maintenance interventions are discussed.

Evaluation of methods used to determine realized energy savings

International Nuclear Information System (INIS)

Boonekamp, Piet G.M.

2006-01-01

Most methods to determine realized total energy savings at national or sectoral level make choices, or neglect problems, which hamper the calculation of sound and useful energy-saving figures. Issues are the choice of the right aggregation level, the appropriate variables to construct a reference energy consumption trend, the energy quantities to be applied and interaction between various effects. Uncertainty margins for results lack in most presentations as well. This paper presents six methods, illustrates the adverse effects of certain choices and problems, and investigates how these methods deal with them. The methods are scored with respect to the issues mentioned above. Finally, a number of improvements are suggested, among which the use of final energy demand expressed in primary energy units, and bottom-up analyses at the level of real saving options. The last option is the more important, as it could provide top-down evaluation results (total savings from decomposition) as well as bottom-up policy monitoring results, both being crucial to new European energy-saving policy

Energy Savings From System Efficiency Improvements in Iowa's HVAC SAVE Program

Energy Technology Data Exchange (ETDEWEB)

Yee, S. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States); Baker, J. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States); Brand, L. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States); Wells, J. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States)

2013-08-01

The objective of this project is to explore the energy savings potential of maximizing furnace and distribution system performance by adjusting operating, installation, and distribution conditions. The goal of the Iowa HVAC System Adjusted and Verified Efficiency (SAVE) program is to train contractors to measure installed system efficiency as a diagnostic tool to ensure that the homeowner achieves the energy reduction target for the home rather than simply performing a tune-up on the furnace or having a replacement furnace added to a leaky system. The PARR research team first examined baseline energy usage from a sample of 48 existing homes, before any repairs or adjustments were made, to calculate an average energy savings potential and to determine which system deficiencies were prevalent. The results of the baseline study of these homes found that, on average, about 10% of the space heating energy available from the furnace was not reaching the conditioned space. In the second part of the project, the team examined a sample of 10 homes that had completed the initial evaluation for more in-depth study. For these homes, the diagnostic data shows that it is possible to deliver up to 23% more energy from the furnace to the conditioned space by doing system tune ups with or without upgrading the furnace. Replacing the furnace provides additional energy reduction. The results support the author's belief that residential heating and cooling equipment should be tested and improved as a system rather than a collection of individual components.

Saving, efficiency and management of electric sector demand

International Nuclear Information System (INIS)

Sanchez de Tembleque, L. J.

2007-01-01

Spanish economic model of development is based on energy consumption, and its main source is imported fossil fuels, which have some environmental and scarcity consequences in the mid term, among others. These problems could be reduced in two ways: economic activity reduction or energy efficiency improvement. In the presence of these possibilities, It may be desirable to bet for saving and energy efficiency, to maintain the economic development. This assignment analyzes the main available regulatory and social mechanisms to promote saving and energy efficiency in the power sector, like systems to internalize social costs in the electricity price, efficiency standards, and encourage the new saving culture. (Author) 15 refs

Energy Savings Potential and Research & Development Opportunities for Commercial Refrigeration

Energy Technology Data Exchange (ETDEWEB)

none,

2009-09-01

This study documents the energy consumption of commercial refrigeration equipment (CRE) in the U.S. and evaluated the energy savings potential of various technologies and energy efficiency measures that could be applied to such equipment. The study provided an overview of CRE applications, assessed the energy-savings potential of CRE in the U.S., outline key barriers to adoption of energy-savings technologies, and recommended opportunities for advanced energy saving technology research. The study was modeled after an earlier 1996 report by Arthur D. Little, Inc., and updated key information, examined more equipment types, and outlined long-term research and development opportunities.

Saving Malta's music memory

OpenAIRE

Sant, Toni

2013-01-01

Maltese music is being lost. Along with it Malta loses its culture, way of life, and memories. Dr Toni Sant is trying to change this trend through the Malta Music Memory Project (M3P) http://www.um.edu.mt/think/saving-maltas-music-memory-2/

A comprehensive framework to quantify energy savings potential from improved operations of commercial building stocks

International Nuclear Information System (INIS)

Azar, Elie; Menassa, Carol C.

2014-01-01

While studies highlight the significant impact of actions performed by occupants and facility managers on building energy performance, current policies ignore the importance of human actions and the potential energy savings from a more efficient operation of building systems. This is mainly attributed to the lack of methods that evaluate non-technological drivers of energy use for large stocks of commercial buildings to support policy making efforts. Therefore, this study proposes a scientific approach to quantifying the energy savings potential due to improved operations of any stock of commercial buildings. The proposed framework combines energy modeling techniques, studies on human actions in buildings, and surveying and sampling methods. The contributions of this study to energy policy are significant as they reinforce the role of human actions in energy conservation, and support efforts to integrate operation-focused solutions in energy conservation policy frameworks. The framework's capabilities are illustrated in a case study performed on the stock of office buildings in the United States (US). Results indicate a potential 21 percent reduction in the current energy use levels of these buildings through realistic changes in current building operation patterns. - Highlights: • Human actions highly influence energy performance of commercial building stocks. • It is challenging to quantify operation-related energy savings potential. • The proposed framework quantifies potential energy savings from improved operations. • The framework can be applied on any stock of commercial buildings. • Applications include support for operation-focused solutions in energy policies

Potential energy savings in renovation projects of residential and service buildings; Energiansaeaestoemahdollisuudet rakennuskannan korjaustoiminnassa

Energy Technology Data Exchange (ETDEWEB)

Heljo, J.; Vihola, J.

2012-11-01

The study estimates the feasible energy savings potential in the 2010 building stock by 2050. The focus is on energy-saving measures related to renovation of residential and service buildings. The calculations were done by building types and age groups using the EKOREM calculation model. The calculations indicate the building types and structural elements where potential for savings exists. The study did not consider energy-saving measures related to changes in heating systems, electrical equipment, property maintenance or use habits. The study disproved the common belief that considerably more energy savings could be achieved faster by focussing on the existing building stock instead of new construction. That is mainly due the fact that it generally pays to implement structural energy-saving measures only when the targeted elements also require other significant repairs besides energy-efficiency improvements. Thus, energy renovations cannot be speeded up very much. The clearest exception are the extra insulations added to roof assemblies that are easy to implement. Attempts to save more energy in the building stock than can be achieved at a small additional cost in connection with needed renovations may multiply costs, and the saving in energy costs will not necessarily cover the additional investments. The efficiency of energy-saving measures can be affected by recommending or ordering use of more energy efficient windows, thicker extra insulations or more efficient ventilation heat recovery systems than the standard solution selected in connection with renovations. The goal of preserving the characteristics of buildings of cultural-historical or architectural value and the typical solutions and materials used in all buildings of a certain period limit the repair and renovation of structural elements. In the case of these buildings, improvement of energy efficiency can be considered in connection with the planning of renovations and the buildings' use and

Comparison of 3D and 2D FSE T2-weighted MRI in the diagnosis of deep pelvic endometriosis: Preliminary results

International Nuclear Information System (INIS)

Bazot, M.; Stivalet, A.; Daraï, E.; Coudray, C.; Thomassin-Naggara, I.; Poncelet, E.

2013-01-01

Aim: To evaluate image quality and diagnostic accuracy of two- (2D) and three-dimensional (3D) T2-weighted magnetic resonance imaging (MRI) for the evaluation of deep infiltrating endometriosis (DIE). Materials and methods: One hundred and ten consecutive patients with suspicion of endometriosis were recruited at two institutions over a 5-month period. Twenty-three women underwent surgery, 18 had DIE at histology. Two readers independently evaluated 3D and 2D MRI for image quality and diagnosis of DIE. Descriptive analysis, chi-square test for categorical or nominal variables, McNemar test for comparison between 3D and 2D T2-weighted MRI, and weighted “statistics” for intra- and interobserver agreement were used for statistical analysis. Results: Both readers found that 3D yielded significantly lower image quality than 2D MRI (p < 0.0001). Acquisition time for 3D was significantly shorter than 2D MRI (p < 0.01). 3D offered similar accuracy to diagnose DIE compared to 2D MRI. For all locations of endometriosis, a high or variable intra-observer agreement was observed for reader 1 and 2, respectively. Conclusions: Despite a lower overall image quality, 3D provides significant time saving and similar accuracy than multiplanar 2D MRI in the diagnosis of specific DIE locations.

Savings impact of a corporate energy manager

International Nuclear Information System (INIS)

Sikorski, B.D.; O'Donnell, B.A.

1999-01-01

This paper discusses the cost savings impact of employing an energy manager with a 16,000-employee corporation. The corporation, Canada's second largest airline, is currently operating nearly 3,000,000 ft 2 of mixed-use facilities spread across the country, with an annual energy budget for ground facilities of over Cdn $4,000,000. This paper outlines the methodology used by the energy manager to deploy an energy management program over a two-year period between April 1995 and May 1997. The paper examines the successes and the lessons learned during the period and summarizes the costs and benefits of the program. The energy manager position was responsible for developing an energy history database with more than 100 active accounts and for monitoring and verifying energy savings. The energy manager implemented many relatively low-cost energy conservation measures, as well as some capital projects, during the first two years of the program. In total, these measures provided energy cost savings of $210,000 per year, or 5% of the total budget. In each case, technologies installed as part of the energy retrofit projects provided not only cost savings but also better control, reduced maintenance, and improved working conditions for employees

Energy Saving Melting and Revert Reduction (E-SMARRT): Precision Casting of Steel

Energy Technology Data Exchange (ETDEWEB)

Dr. Von L. Richards

2011-09-30

the end of the casting opposite the gate. (3) It is recommended that lost foam castings in steel be gated for a quiescent fill in an empty cavity mold to prevent foam occlusion defects from the collapse mode. The energy benefit is primarily in yield savings and lower casting weight per function due to elimination of draft and parting lines for the larger lost foam castings. For the smaller investment casting, scrap losses due to shell cracking will be reduced. Both of these effects will reduce the metal melted per good ton of castings. There will also be less machine stock required per casting which is a yield savings and a small additional energy savings in machining. Downstream savings will come from heavy truck and railroad applications. Application of these processes to heavy truck castings will lighten the heavy truck fleet by about ten pounds per truck. Using ten years to achieve full penetration of the truck fleet at linear rate this will result in a fuel savings of 131 trillion BTU over ten years.

Determinants of Household Savings in Turkey Except for Income

Directory of Open Access Journals (Sweden)

Mehmet ŞENGÜR

2016-01-01

Full Text Available Household has an extremely important place in the division of income for the economies. It plays a decisive role in personal consumption, investment, and savings. This study aims to identify the determinants of household savings except for income. In this study, "Household Budget Survey" conducted by Turkish Statistical Institute for the years 2002-2013 is used. Survey data has been analyzed by logistic regression models. The results of the study show that house ownership, having an extra house, having annual disposable income of over 10.000 ₺, education level also have a positive effect on household savings. On the other hand, the number of family members, car ownership, temporary or seasonal employment, and living in rural areas affect household savings in a negative way.

An Assessment of the Operations of Rotational Savings and Credit Association in the Kumasi Metropolis, Ghana

Directory of Open Access Journals (Sweden)

Joseph Owusu

2013-07-01

Full Text Available Small and medium scale enterprises (SMEs play significant roles in socio economic development of every country in the world and serve as an important source of job creation and innovation. Despite their significant contributions to the economy, access to funding is a challenge to traders within the informal sector in Ghana. These challenges negatively affect the businesses within the informal sector of the economy. As a result, Rotational Savings and Credit Associations (ROSCA becomes the most easiest and available alternative through which most of these traders raise funds to support their business operations. This study aims at examining the operations of ROSCA in the Kumasi Metropolis, Ghana. The study adopted survey strategy using a mix of quantitative and qualitative methods, although the focus was more on quantitative. Primary data was also used for the study. The study revealed that, Capital Expansion appears to be the major reason that influences individuals’ decision to join the Rotational Savings and Credit Association. Information from the study also showed that on the average, ten (10 people constitute the membership of various Rotational Savings and Credit Association within the study setting. Balloting was found to be the major criteria used by Rotational Savings and Credit Associations to determine the turn of each member in terms of disbursing the accumulated funds to their membership.

Weight suppression predicts total weight gain and rate of weight gain in outpatients with anorexia nervosa.

Science.gov (United States)

Carter, Frances A; Boden, Joseph M; Jordan, Jennifer; McIntosh, Virginia V W; Bulik, Cynthia M; Joyce, Peter R

2015-11-01

The present study sought to replicate the finding of Wildes and Marcus, Behav Res Ther, 50, 266-274, 2012 that higher levels of weight suppression at pretreatment predict greater total weight gain, faster rate of weight gain, and bulimic symptoms amongst patients admitted with anorexia nervosa. Participants were 56 women with anorexia nervosa diagnosed by using strict or lenient weight criteria, who were participating in a randomized controlled psychotherapy trial (McIntosh et al., Am J Psychiatry, 162, 741-747, 2005). Thirty-five women completed outpatient treatment and post-treatment assessment. Weight suppression was the discrepancy between highest lifetime weight at adult height and weight at pretreatment assessment. Outcome variables were total weight gain, rate of weight gain, and bulimic symptoms in the month prior to post-treatment assessment [assessed using the Eating Disorders Examination (Fairburn et al., Binge-Eating: Nature, Assessment and Treatment. New York: Guilford, 1993)]. Weight suppression was positively associated with total weight gain and rate of weight gain over treatment. Regression models showed that this association could not be explained by covariates (age at onset of anorexia nervosa and treatment modality). Weight suppression was not significantly associated with bulimic symptoms in the month prior to post-treatment assessment, regardless of whether bulimic symptoms were examined as continuous or dichotomous variables. The present study reinforces the previous finding that weight suppression predicts total weight gain and rate of weight gain amongst patients being treated for anorexia nervosa. Methodological issues may explain the failure of the present study to find that weight suppression predicts bulimic symptoms. Weight suppression at pretreatment for anorexia nervosa should be assessed routinely and may inform treatment planning. © 2015 Wiley Periodicals, Inc.

Predicting weight status stability and change from fifth grade to eighth grade: the significant role of adolescents' social-emotional well-being.

Science.gov (United States)

Chang, Yiting; Gable, Sara

2013-04-01

The primary objective of this study was to predict weight status stability and change across the transition to adolescence using parent reports of child and household routines and teacher and child self-reports of social-emotional development. Data were from the Early Childhood Longitudinal Study-Kindergarten Cohort (ECLS-K), a nationally representative sample of children who entered kindergarten during 1998-1999 and were followed through eighth grade. At fifth grade, parents reported on child and household routines and the study child and his/her primary classroom teacher reported on the child's social-emotional functioning. At fifth and eighth grade, children were directly weighed and measured at school. Nine mutually-exclusive weight trajectory groups were created to capture stability or change in weight status from fifth to eighth grade: (1) stable obese (ObeSta); (2) obese to overweight (ObePos1); (3) obese to healthy (ObePos2); (4) stable overweight (OverSta); (5) overweight to healthy (OverPos); (6) overweight to obese (OverNeg); (7) stable healthy (HelSta); (8) healthy to overweight (HelNeg1); and (9) healthy to obese (HelNeg2). Except for breakfast consumption at home, school-provided lunches, nighttime sleep duration, household and child routines did not predict stability or change in weight status. Instead, weight status trajectory across the transition to adolescence was significantly predicted by measures of social-emotional functioning at fifth grade. Assessing children's social-emotional well-being in addition to their lifestyle routines during the transition to adolescence is a noteworthy direction for adolescent obesity prevention and intervention. Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Money in the bank : Feeling powerful increases saving

NARCIS (Netherlands)

Garbinsky, E.; Klesse, A.K.; Aaker, J.

2014-01-01

Across five studies, this research reveals that feeling powerful increases saving. This effect is driven by the desire to maintain one’s current state. When the purpose of saving is no longer to accumulate money but to spend it on a status-related product, the basic effect is reversed, and those who

Planning a Sabbatical? These Tips Can Save Taxes.

Science.gov (United States)

Matoney, Joseph P., Jr.; Weston, Marilyn

1985-01-01

Information on potential tax-saving opportunities when planning a sabbatical is provided for college personnel. Advice is offered about tax savings for: rental of the academician's personal residences while away from home, the home office deduction, use of an auto, and foreign income tax exclusion. The answer to what expenses are deductible…

Quantification of energy savings from Ireland's Home Energy Saving scheme. An ex post billing analysis

Energy Technology Data Exchange (ETDEWEB)

Scheer, J.; Clancy, M.; Ni Hogain, S. [Sustainable Energy Authority of Ireland, Wilton Park House, Wilton Terrace, Dublin 2 (Ireland)

2013-02-15

This paper quantifies the energy savings realised by a sample of participants in the Sustainable Energy Authority of Ireland's Home Energy Saving (HES) residential retrofit scheme (currently branded as the Better Energy Homes scheme), through an ex post billing analysis. The billing data are used to evaluate: (1) the reduction in gas consumption of the sample between pre- (2008) and post- (2010) scheme participation when compared to the gas consumption of a control group, (2) an estimate of the shortfall when this result is compared to engineering-type ex ante savings estimates and (3) the degree to which these results may apply to the wider population. All dwellings in the study underwent energy efficiency improvements, including insulation upgrades (wall and/or roof), installation of high-efficiency boilers and/or improved heating controls, as part of the HES scheme. Metered gas use data for the 210 households were obtained from meter operators for a number of years preceding dwelling upgrades and for a post-intervention period of 1 year. Dwelling characteristics and some household behavioural data were obtained through a survey of the sample. The gas network operator provided anonymised data on gas usage for 640,000 customers collected over the same period as the HES sample. Dwelling type data provided with the population dataset enabled matching with the HES sample to increase the internal validity of the comparison between the control (matched population data) and the treatment (HES sample). Using a difference-in-difference methodology, the change in demand of the sample was compared with that of the matched population subset of gas-using customers in Ireland over the same time period. The mean reduction in gas demand as a result of energy efficiency upgrades for the HES sample is estimated as 21 % or 3,664{+-}603 kWh between 2008 and 2010. An ex ante estimate of average energy savings, based on engineering calculations (u value reductions and improved boiler

Potential energy savings and CO2 emissions reduction of China's cement industry

International Nuclear Information System (INIS)

Ke, Jing; Zheng, Nina; Fridley, David; Price, Lynn; Zhou, Nan

2012-01-01

This study analyzes current energy and carbon dioxide (CO 2 ) emission trends in China's cement industry as the basis for modeling different levels of cement production and rates of efficiency improvement and carbon reduction in 2011–2030. Three cement output projections are developed based on analyses of historical production and physical and macroeconomic drivers. For each of these three production projections, energy savings and CO 2 emission reduction potentials are estimated in a best practice scenario and two continuous improvement scenarios relative to a frozen scenario. The results reveal the potential for cumulative final energy savings of 27.1 to 37.5 exajoules and energy-related direct emission reductions of 3.2 to 4.4 gigatonnes in 2011–2030 under the best practice scenarios. The continuous improvement scenarios produce cumulative final energy savings of 6.0 to 18.9 exajoules and reduce CO 2 emissions by 1.0 to 2.4 gigatonnes. This analysis highlights that increasing energy efficiency is the most important policy measure for reducing the cement industry's energy and emissions intensity, given the current state of the industry and the unlikelihood of significant carbon capture and storage before 2030. In addition, policies to reduce total cement production offer the most direct way of reducing total energy consumption and CO 2 emissions. - Highlights: ► This study models output and efficiency improvements in Chinese cement industry from 2011–2030. ► Energy savings and CO 2 emission reductions estimated for 3 scenarios relative to frozen scenario. ► Results reveal cumulative final energy savings potential of 27.1–37.5 EJ and 3.2–4.4 Gt CO 2 reductions. ► Increasing efficiency is the most important policy for reducing cement energy and emissions intensity.

Effects of heat and electricity saving measures in district-heated multistory residential buildings

International Nuclear Information System (INIS)

Truong, Nguyen Le; Dodoo, Ambrose; Gustavsson, Leif

2014-01-01

Highlights: • We analyzed the potential for energy savings in district heated buildings. • Measures that reduce more peak load production give higher primary energy savings. • Efficient appliances increase heat demand but give net primary energy savings. • Efficient appliances give the largest net primary energy savings. - Abstract: The effects of heat and electricity saving measures in district-heated buildings can be complex because these depend not only on how energy is used on the demand side but also on how energy is provided from the supply side. In this study, we analyze the effects of heat and electricity saving measures in multistory concrete-framed and wood-framed versions of an existing district-heated building and examine the impacts of the reduced energy demand on different district heat (DH) production configurations. The energy saving measures considered are for domestic hot water reduction, building thermal envelope improvement, ventilation heat recovery (VHR), and household electricity savings. Our analysis is based on a measured heat load profile of an existing DH production system in Växjö, Sweden. Based on the measured heat load profile, we model three minimum-cost DH production system using plausible environmental and socio-political scenarios. Then, we investigate the primary energy implications of the energy saving measures applied to the two versions of the existing building, taking into account the changed DH demand, changed cogenerated electricity, and changed electricity use due to heat and electricity saving measures. Our results show that the difference between the final and primary energy savings of the concrete-framed and wood-framed versions of the case-study building is minor. The primary energy efficiency of the energy saving measures depends on the type of measure and on the composition of the DH production system. Of the various energy saving measures explored, electricity savings give the highest primary energy savings

Heat savings and heat generation technologies: Modelling of residential investment behaviour with local health costs

International Nuclear Information System (INIS)

Zvingilaite, Erika; Klinge Jacobsen, Henrik

2015-01-01

The trade-off between investing in energy savings and investing in individual heating technologies with high investment and low variable costs in single family houses is modelled for a number of building and consumer categories in Denmark. For each group the private economic cost of providing heating comfort is minimised. The private solution may deviate from the socio-economical optimal solution and we suggest changes to policy to incentivise the individuals to make choices more in line with the socio-economic optimal mix of energy savings and technologies. The households can combine their primary heating source with secondary heating e.g. a woodstove. This choice results in increased indoor air pollution with fine particles causing health effects. We integrate health cost due to use of woodstoves into household optimisation of heating expenditures. The results show that due to a combination of low costs of primary fuel and low environmental performance of woodstoves today, included health costs lead to decreased use of secondary heating. Overall the interdependence of heat generation technology- and heat saving-choice is significant. The total optimal level of heat savings for private consumers decrease by 66% when all have the option to shift to the technology with lowest variable costs. - Highlights: • Heat saving investment and heat technology choice are interdependent. • Health damage costs should be included in private heating choice optimisation. • Flexibility in heating technology choice reduce the optimal level of saving investments. • Models of private and socioeconomic optimal heating produce different technology mix. • Rebound effects are moderate but varies greatly among consumer categories

Energy savings for solar heating systems; Solvarmeanlaegs energibesparelser

Energy Technology Data Exchange (ETDEWEB)

Furbo, S.; Fan, J.

2011-01-15

Energy savings for a number of new solar heating systems in one family houses have been determined by means of information on the energy consumption of the houses before and after installation of the solar heating systems. The investigated solar heating systems are marketed by Velux Danmark A/S, Sonnnenkraft Scandinavia A/S and Batec Solvarme A/S. Solar domestic hot water systems as well as solar combi systems are included in the investigations The houses have different auxiliary energy supply systems: Natural gas boilers, oil fired burners, electrical heating and district heating. Some of the houses have a second auxiliary energy supply system. The collector areas vary from 1.83 m{sup 2} to 9.28 m{sup 2}. Some of the solar heating systems are based on energy units with a new integrated natural gas boiler and a heat storage for the solar heating system. The existing energy systems in the houses are for most of the houses used as the auxiliary energy systems for the solar heating systems. The yearly energy savings for the houses where the only change is the installation of the solar heating system vary from 300 kWh per m{sup 2} solar collector to 1300 kWh per m{sup 2} solar collector. The average yearly energy savings is about 670 kWh per m{sup 2} solar collector for these solar heating systems. The energy savings per m{sup 2} solar collector are not influenced by the solar heating system type, the company marketing the system, the auxiliary energy supply system, the collector area, the collector tilt, the collector azimuth, the energy consumption of the house or the location of the house. The yearly energy savings for the houses with solar heating systems based on energy units including a new natural gas boiler vary from 790 kWh per m{sup 2} solar collector to 2090 kWh per m{sup 2} solar collector. The average yearly energy savings is about 1520 kWh per m{sup 2} solar collector for these solar heating systems. The energy savings per m{sup 2} solar collector for

12 CFR 584.4 - Certain acquisitions by savings and loan holding companies.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Certain acquisitions by savings and loan... TREASURY SAVINGS AND LOAN HOLDING COMPANIES § 584.4 Certain acquisitions by savings and loan holding companies. (a) Acquisitions by a savings and loan holding company of more than five percent of a non...

Dynamic analysis of savings and economic growth in Nigeria ...

African Journals Online (AJOL)

Dynamic analysis of savings and economic growth in Nigeria. ... a trivariate dynamic Granger causality model with savings, economic growth and foreign ... It is recommended that in the short run, policies in Nigeria should be geared towards ...

A one-year resistance training program following weight loss has no significant impact on body composition and energy expenditure in postmenopausal women living with overweight and obesity.

Science.gov (United States)

Hintze, Luzia Jaeger; Messier, Virginie; Lavoie, Marie-Ève; Brochu, Martin; Lavoie, Jean-Marc; Prud'homme, Denis; Rabasa-Lhoret, Rémi; Doucet, Éric

2018-05-15

Resistance training (RT) has been shown to decrease fat mass (FM), and increase fat-free mass (FFM), which can be a useful for weight loss maintenance. To examine the effects of a 1-year RT intervention on weight loss maintenance following a 6-month dietary weight loss intervention. Following a 6-month dietary weight loss intervention (-6% ± 5.8; 5.05 kg ± 4.45), 70 postmenopausal women living with overweight or obesity were randomized to a control group (n = 34) or a RT group (n = 36) (3×/week first 6 months, 2×/week last 6 months, 70-80% of 1-repetition maximum). Body composition (DXA), abdominal visceral adipose tissue (VAT) and subcutaneous adipose tissue (SAT) (CT scan), resting energy expenditure (EE) (indirect calorimetry), physical activity EE and total daily EE were measured (doubly-labelled water). A total of 54 participants completed the study (control group n = 29; RT group n = 25) and compliance to the RT program was on average 64%. Significant regains were noted for body weight 0.98 (3.71) kg vs. 1.33 (3.94) kg and FM regain 1.32 (2.69) kg vs. 0.81 (3.26) kg in control and RT groups after the 1-year weight maintenance phase. No group differences were noted. Resting EE and total daily EE did not change after the weight maintenance phase, and no differences were observed between groups. Both groups had significantly greater than predicted decrease in resting EE after the 6-month dietary intervention and at the end of the 1-year weight-loss maintenance phase. Our results suggest that a 1-year RT intervention following a 6-month dietary weight loss intervention does not improve weight loss maintenance, body composition or EE in post-menopausal women living with overweight or obesity. Copyright © 2018 Elsevier Inc. All rights reserved.

Daylight Saving Time Transitions and Road Traffic Accidents

Directory of Open Access Journals (Sweden)

Tuuli Lahti

2010-01-01

Full Text Available Circadian rhythm disruptions may have harmful impacts on health. Circadian rhythm disruptions caused by jet lag compromise the quality and amount of sleep and may lead to a variety of symptoms such as fatigue, headache, and loss of attention and alertness. Even a minor change in time schedule may cause considerable stress for the body. Transitions into and out of daylight saving time alter the social and environmental timing twice a year. According to earlier studies, this change in time-schedule leads to sleep disruption and fragmentation of the circadian rhythm. Since sleep deprivation decreases motivation, attention, and alertness, transitions into and out of daylight saving time may increase the amount of accidents during the following days after the transition. We studied the amount of road traffic accidents one week before and one week after transitions into and out of daylight saving time during years from 1981 to 2006. Our results demonstrated that transitions into and out of daylight saving time did not increase the number of traffic road accidents.

FINANCIAL SITUATION AND ATTITUDES TOWARDS SAVING IN POLISH SOCIETY:EVIDENCE FROM MICRO DATA

Directory of Open Access Journals (Sweden)

ANETA MARIA KŁOPOCKA

2014-05-01

Full Text Available Savings of the household sector are undoubtedly very important both in terms of micro- (for the optimum personal finance management and macroeconomics (from the perspective of the economic growth. Furthermore, the major transformation has occurred in the household saving behavior in Poland in recent years. This is due to sharp changes in the functioning of the households in the period of economic transformation and is the result of the global financial and economic crisis. This paper provides empirical evidence of the complex interrelations of income, level of optimism/pessimism, attitudes towards saving and households' consumption–savings decisions. There is a strong income and savings relationship due to the positive income effect on the household saving propensity (through the increased motivation and the long run planning acceptance and the saving ability due to ample satisfaction of household consumption needs. Higher income leads to the self-restraint rejection. The level of household optimism/pessimism exerts a substantial effect on the saving motives and attitudes towards saving. The decreasing expectations leads to the slope of the overall saving motivation. Moreover pessimists seem to reveal the lowest inclination to deliberate saving. Simultaneously, they seem to be most suspicious about the bank loan incurring. The level of optimism is positively associated with both the share of savers and the level of accumulated savings.

Adopting a surgical safety checklist could save money and improve the quality of care in U.S. hospitals.

Science.gov (United States)

Semel, Marcus E; Resch, Stephen; Haynes, Alex B; Funk, Luke M; Bader, Angela; Berry, William R; Weiser, Thomas G; Gawande, Atul A

2010-09-01

Use of the World Health Organization's Surgical Safety Checklist has been associated with a significant reduction in major postoperative complications after inpatient surgery. We hypothesized that implementing the checklist in the United States would generate cost savings for hospitals. We performed a decision analysis comparing implementation of the checklist to existing practice in U.S. hospitals. In a hospital with a baseline major complication rate after surgery of at least 3 percent, the checklist generates cost savings once it prevents at least five major complications. Using the checklist would both save money and improve the quality of care in hospitals throughout the United States.

Winglets Save Billions of Dollars in Fuel Costs

Science.gov (United States)

2010-01-01

The upturned ends now featured on many airplane wings are saving airlines billions of dollars in fuel costs. Called winglets, the drag-reducing technology was advanced through the research of Langley Research Center engineer Richard Whitcomb and through flight tests conducted at Dryden Flight Research Center. Seattle-based Aviation Partners Boeing -- a partnership between Aviation Partners Inc., of Seattle, and The Boeing Company, of Chicago -- manufactures Blended Winglets, a unique design featured on Boeing aircraft around the world. These winglets have saved more than 2 billion gallons of jet fuel to date, representing a cost savings of more than $4 billion and a reduction of almost 21.5 million tons in carbon dioxide emissions.

76 FR 2029 - Small Business Investment Companies-Energy Saving Qualified Investments

Science.gov (United States)

2011-01-12

... 3245-AF86 Small Business Investment Companies--Energy Saving Qualified Investments AGENCY: U.S. Small... Administration (SBA) is setting forth the new defined terms, ``Energy Saving Qualified Investment'' and ``Energy Saving Activities'', for the Small Business Investment Company (SBIC) Program. The new definitions are...

Efficacy of New Measures Saving Time in Acute Stroke Management: A Quantified Analysis.

Science.gov (United States)

Iglesias Mohedano, Ana María; García Pastor, Andrés; Díaz Otero, Fernando; Vázquez Alen, Pilar; Vales Montero, Marta; Luque Buzo, Elisa; Redondo Ráfales, Nuria; Chavarria Cano, Beatriz; Fernández Bullido, Yolanda; Villanueva Osorio, Jose Antonio; Gil Núñez, Antonio

2017-08-01

Time to treatment remains the most important factor in acute ischemic stroke prognosis. We quantified the effect of new interventions reducing in-hospital delays in acute stroke management and assessed its repercussion on door-to-imaging (DTI), imaging-to-needle (ITN), and door-to-needle (DTN) times. Prospective registry of consecutive stroke patients who were candidates for reperfusion therapy attended in a tertiary care hospital from February 1 to December 31, 2014. A series of measures aimed at reducing in-hospital delays were implemented. We compared DTI, ITN, and DTN times between patients who underwent the interventions and those who did not. 231 patients. DTI time was lower when personal history was reviewed and tests were ordered before patient arrival (2.5 minutes saved, P = .016) and when electrocardiogram was not made (5.4 minutes saved, P time significantly (14 and 12 minutes saved, respectively, P time. Completing all steps resulted in the lowest DTI and ITN times (13 and 19 minutes, respectively). Every measure is an important part of a chain focused on saving time in acute stroke: the lowest DTI and ITN times were obtained when all steps were completed. Measures shortening ITN time produced a greater impact on DTN time reduction; therefore, ITN interventions should be considered a critical part of new protocols and guidelines. Copyright © 2017. Published by Elsevier Inc.

Economic assessment of different mulches in conventional and water-saving rice production systems.

Science.gov (United States)

Jabran, Khawar; Hussain, Mubshar; Fahad, Shah; Farooq, Muhammad; Bajwa, Ali Ahsan; Alharrby, Hesham; Nasim, Wajid

2016-05-01

Water-saving rice production systems including alternate wetting and drying (AWD) and aerobic rice (AR) are being increasingly adopted by growers due to global water crises. Application of natural and artificial mulches may further improve water economy of water-saving rice production systems. Conventionally flooded rice (CFR) system has been rarely compared with AWD and AR in terms of economic returns. In this 2-year field study, we compared CFR with AWD and AR (with and without straw and plastic mulches) for the cost of production and economic benefits. Results indicated that CFR had a higher production cost than AWD and AR. However, application of mulches increased the cost of production of AWD and AR production systems where plastic mulch was expensive than straw mulch. Although the mulching increased the cost of production for AWD and AR, the gross income of these systems was also improved significantly. The gross income from mulched plots of AWD and AR was higher than non-mulched plots of the same systems. In conclusion, AWD and AR effectively reduce cost of production by economizing the water use. However, the use of natural and artificial mulches in such water-saving environments further increased the economic returns. The maximized economic returns by using straw mulch in water-saving rice production systems definitely have pragmatic implications for sustainable agriculture.

Autonomy-Enabled Fuel Savings for Military Vehicles: Report on 2016 Aberdeen Test Center Testing

Energy Technology Data Exchange (ETDEWEB)

Ragatz, Adam [National Renewable Energy Lab. (NREL), Golden, CO (United States); Prohaska, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gonder, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-05-26

Fuel savings have never been the primary focus for autonomy-enabled military vehicles. However, studies have estimated that autonomy in passenger and commercial vehicles could improve fuel economy by as much as 22%-33% over various drive cycles. If even a fraction of this saving could be realized in military vehicles, significant cost savings could be realized each year through reduced fuel transport missions, reduced fuel purchases, less maintenance, fewer required personnel, and increased vehicle range. Researchers from the National Renewable Energy Laboratory installed advanced data logging equipment and instrumentation on two autonomy-enabled convoy vehicles configured with Lockheed Martin's Autonomous Mobility Applique System to determine system performance and improve on the overall vehicle control strategies of the vehicles. Initial test results from testing conducted at the U.S. Army Aberdeen Test Center at the Aberdeen Proving Grounds are included in this report. Lessons learned from in-use testing and performance results have been provided to the project partners for continued system refinement.

10 CFR 436.21 - Savings-to-investment ratio.

Science.gov (United States)

2010-01-01

... is the ratio of the present value savings to the present value costs of an energy or water conservation measure. The numerator of the ratio is the present value of net savings in energy or water and non... conservation measure. The denominator of the ratio is the present value of the net increase in investment and...

Restoring Hope: You Can Help Save A Life

Science.gov (United States)

Department of Defense Submit Search Restoring Hope Sep. 1, 2010 You Can Help Save A Life More Focus Needed to of Staff Videos Pentagon Channel Restoring Hope: 90 min. Special - Part 1 | Part 2 More Pentagon Prevention Month: Marine Corps Team Helps Save Lives. I Will Never Quit on Life Sept.8, 2010 - Mrs. Mullen on

Analysis of interactions among the barriers to energy saving in China

International Nuclear Information System (INIS)

Wang Guohong; Wang Yunxia; Zhao Tao

2008-01-01

Since China became the second largest energy consumer and carbon dioxide emitter, the problem of energy consumption and environmental pollution has drawn the world's attention. Meanwhile, Chinese government has put high emphasis on the problem. One project of energy saving initiated by Chinese government has been put into practice. However, many difficulties need to be dealt with to meet the expected aim of social development. The objective of this article is to investigate the interactions among the major barriers which prevent the practice of energy saving in China. Obviously, a clear definition of relationships among the barriers to energy saving helps top leaders make relevant decisions to solve the problem of economic sustainability, energy security and environment pollution in the future. To date, studies specifying energy-saving barriers have often focused on analyzing these barriers separately. As a result, a holistic view in understanding the barriers to energy-saving project is lacking. Interpretive structural modeling (ISM) is utilized to summarize the critical barriers hindering the project of energy saving in China and to explain the interrelationships among them. Suggestions for energy-saving practice and future research are provided

Testing the Financial Capability Framework: Findings from YouthSave-Impact Study Kenya.

Science.gov (United States)

Kagotho, Njeri; Ssewamala, Fred M; Patak-Pietrafesa, Michele; Byansi, William

2018-01-01

In sub-Saharan Africa (SSA), youths (23 years or younger)-who account for almost half the population-are particularly vulnerable to poverty and exclusion from financial markets and intermediaries. In addition, a significant factor in the financial instability of the region appears to be the economic functioning of its youths. In recent years, social work interventions throughout the region have focused on investing in the economic functioning of youths. This study looked at baseline data from one such intervention in Kenya (N = 3,965), using the financial capabilities framework to evaluate the factors related to youths' saving behaviors. Authors investigated the association between youths' financial literacy (that is, knowledge, socialization), financial access, and financial capabilities and savings behaviors. Results indicate that adolescents who rate themselves as financially literate and those living in close proximity to a bank are more likely to report higher capabilities. Furthermore, financial capabilities in turn partially mediate the relationship between financial literacy, access, and savings. Overall, the study's findings point to the positive effect of enhanced financial capabilities among youths and offer support for asset-based interventions targeting youths in SSA. © 2017 National Association of Social Workers.

An energy saving system for hospital laundries

Energy Technology Data Exchange (ETDEWEB)

Katsanis, J.S.; Tsarabaris, P.T.; Polykrati, A.D.; Proios, A.N. [National Technical Univ. of Athens, Athens (Greece). School of Electrical and Computer Engineering; Koufakis, E.I. [Public Power Corp. S.A., Crete (Greece)

2009-07-01

Hospital laundries are one of the largest consumers of water and electrical and thermal energy. This paper examined the energy savings achieved by a system using the hot wastewater from the washing process. Hospital laundries consume thermal energy using steam, which is produced in boilers by burning diesel oil or natural gas. Electrical energy for the mechanical drives, ventilation and also the lighting required in the laundry area are big consumers of energy. The paper presented the proposed system and discussed the parameters of the system and system dimensioning. The paper also provided and discussed an interpretation of steam and energy savings. The proposed system was considered to be economically viable, simple in its construction, installation and operation. From the application of the suggested system, the cost savings resulted in a satisfactory payback period for the capital invested of approximately three to five years. 14 refs., 4 tabs., 2 figs.

THE IMPACT OF LIBERALIZED FINANCIAL SYSTEM ON SAVINGS, INVESTMENT AND GROWTH IN NIGERIA

Directory of Open Access Journals (Sweden)

MATTHEW, A. Oluwatoyin

2011-12-01

Full Text Available For the past twenty years, an enhanced financial sectoral deregulation has been a major economic tool in the agenda of most less developed economies and Nigeria is no exception. The discouraging level of growth with reference to the savings and investment culture of the people and government involvement in these economies has call to question whether financial sector liberalization have an impact on savings and investment in the economy and by extension on the level of growth and development of such economies. This study attempted to take a cursory look at the issue by examining the impact of financial system liberalization on savings and investment and by extension growth and development in Nigeria between 1997 and 2008. Some of the policy recommendations centred on the government creating an enabling environment for private investment to thrive. This will go a long way in helping to promote private investment with significant benefits in the long run for growth and development to the advantage of the citizenry and the economy at large.

Gait and electromyographic analysis of patients recovering after limb-saving surgery

NARCIS (Netherlands)

De Visser, E; Mulder, T; Schreuder, HWB; Veth, RPH; Duysens, J

2000-01-01

Objective. Control of gait after limb-saving surgery. Design. Case series study. Background. At the moment little is known about adaptations in patients' gait after limb-saving surgery. Methods. Nineteen patients who underwent limb-saving surgery at least 1 yr earlier and 10 normal subjects were

75 FR 22681 - Prohibited Service at Savings and Loan Holding Companies

Science.gov (United States)

2010-04-29

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Prohibited Service at Savings and Loan... concerning the following information collection: Title of Proposal: Prohibited Service at Savings and Loan... with a savings and loan holding company (SLHC), the SLHC or the individual will need to apply to the...

48 CFR 809.270 - Qualified products for convenience/labor-saving foods.

Science.gov (United States)

2010-10-01

... convenience/labor-saving foods. 809.270 Section 809.270 Federal Acquisition Regulations System DEPARTMENT OF... 809.270 Qualified products for convenience/labor-saving foods. (a) Each VISN Nutrition and Food Service representative is authorized to establish a common VISN QPL for convenience and labor-saving foods...

Energy savings in Polish buildings

Energy Technology Data Exchange (ETDEWEB)

Markel, L.C.; Gula, A.; Reeves, G.

1995-12-31

A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

The PO production chain and possibilities for energy saving. Public summary

Energy Technology Data Exchange (ETDEWEB)

Donszelmann, E.; De Buck, A.; Croezen, H.; Wielders, L.

2012-01-15

The Dutch Industry and the Dutch government have made long term agreements on energy efficiency (LEE) for companies that are under the European Trading Scheme (ETS). These companies have to report frequently on their possibilities and achievements in energy efficiency. These reports describe the current state of energy use, the possible measures that can be taken and the measures already taken and their results. LyondellBasell is one of the companies that take part in LEE. Based on the agreements of LEE linked to ETS, companies make an effort to realise a significant energy saving within their business community, and the government supports them by means of process coordination and financing additional studies. Agentschap NL coordinates the governmental support. LyondellBasell asked Agentschap NL for support in assessing their energy efficiency on site and through the chain of its products. CE Delft has been commissioned by Agentschap NL and LyondellBasell to determine the carbon footprint and cumulative energy demand of the two production sites of LyondellBasell in the Rotterdam area. Purpose of the project is to identify energy saving potential within the PO (propylene oxide), Styrene and tert-butyl alcohol production chains. This study also focuses on those options that require cooperation with other companies or yield savings for more than one company within the PO production chains. The project consisted of two pathways. The first assessed the possibilities of energy saving in the supply chain. Both the Maasvlakte and the Botlek site of LyondellBasell were addressed. The second pathway focused on three product chains: Styrene, Polyols and ETBE/MTBE. This report presents the results of the projects second pathway: the product chains.

Assessment of Energy-Saving Practices of the Hospitality Industry in Macau

Directory of Open Access Journals (Sweden)

Xu Wang

2018-01-01

Full Text Available Macau is building a world tourism and leisure center. In the context of flourishing hospitality development, energy issues have attracted more and more attention in recent years. On the basis of the field survey of 28 hotels, an evaluation index system is built to assess the status of energy-saving and environmental protection practices in the hospitality industry in Macau. This system is built by selecting some credits from Leadership in Energy and Environmental Design (LEED and adding several new indices according to the social and economic characteristics of Macau. The results show that the hotels have made significant efforts to improve the energy efficiency in recent years. A total of 71.4% of the hotels have formulated and implemented the energy-saving and environmental protection programs. However, there is an apparent gap in energy and environmental performance between different star-level hotels. The higher is the star-level of a hotel, the higher enthusiasm on energy-saving a hotel has, e.g., 63.6% of the 5-star hotels carried out the carbon auditing and energy management measures, but there is no 2-star hotel that adopted them. The energy-saving performance can be great improved if more efforts are made in the future, especially for the 2-star hotels. Finally, we put forward some suggestions for how to bridge this gap and present a possible roadmap for the further improvement of energy efficiency of the hotel industry in Macau. The results from this work are useful to help the government and hotel managers to take actions for improving the energy utilization and efficiency of the hospitality industry in Macau.

The effects of maternal weight gain patterns on term birth weight in African-American women

Science.gov (United States)

Misra, Vinod K.; Hobel, Calvin J.; Sing, Charles F.

2010-01-01

Objective The goals of our study were 1) to estimate the trends in maternal weight gain patterns and 2) to estimate the influence of variation in maternal weight and rate of weight gain over different time periods in gestation on variation in birth weight in African-American and non-African-American gravidas. Study Design and Setting Data from a prospective cohort study in which pregnant women were monitored at multiple time points during pregnancy were analyzed. Maternal weight was measured at three times during pregnancy, preconception (W0); 16-20 weeks gestation (W1); and 30-36 weeks gestation (W2), in a cohort of 435 women with full-term singleton pregnancies. The relationship between gestational age-adjusted birth weight (aBW) and measures of maternal weight and rate of weight gain across pregnancy was estimated using a multivariable longitudinal regression analysis stratified on African-American race. Results The aBW was significantly associated with maternal weight measured at any visit in both strata. For African-American women, variation in aBW was significantly associated with variation in the rate of maternal weight gain in the first half of pregnancy (W01) but not the rate of maternal weight gain in the second half of pregnancy (W12); while for non-African-American women, variation in aBW was significantly associated with W12 but not W01. Conclusion Factors influencing the relationship between aBW and maternal weight gain patterns depend on the context of the pregnancy defined by race. Clinical decisions and recommendations about maternal weight and weight gain during pregnancy may need to account for such heterogeneity. PMID:20632908

Key issues in estimating energy and greenhouse gas savings of biofuels: challenges and perspectives

Directory of Open Access Journals (Sweden)

Dheeraj Rathore

2016-06-01

Full Text Available The increasing demand for biofuels has encouraged the researchers and policy makers worldwide to find sustainable biofuel production systems in accordance with the regional conditions and needs. The sustainability of a biofuel production system includes energy and greenhouse gas (GHG saving along with environmental and social acceptability. Life cycle assessment (LCA is an internationally recognized tool for determining the sustainability of biofuels. LCA includes goal and scope, life cycle inventory, life cycle impact assessment, and interpretation as major steps. LCA results vary significantly, if there are any variations in performing these steps. For instance, biofuel producing feedstocks have different environmental values that lead to different GHG emission savings and energy balances. Similarly, land-use and land-use changes may overestimate biofuel sustainability. This study aims to examine various biofuel production systems for their GHG savings and energy balances, relative to conventional fossil fuels with an ambition to address the challenges and to offer future directions for LCA based biofuel studies. Environmental and social acceptability of biofuel production is the key factor in developing biofuel support policies. Higher GHG emission saving and energy balance of biofuel can be achieved, if biomass yield is high, and ecologically sustainable biomass or non-food biomass is converted into biofuel and used efficiently.